Generalized Fourier transforms classes

DEFF Research Database (Denmark)

Berntsen, Svend; Møller, Steen

2002-01-01

The Fourier class of integral transforms with kernels $B(\\omega r)$ has by definition inverse transforms with kernel $B(-\\omega r)$. The space of such transforms is explicitly constructed. A slightly more general class of generalized Fourier transforms are introduced. From the general theory foll...... follows that integral transform with kernels which are products of a Bessel and a Hankel function or which is of a certain general hypergeometric type have inverse transforms of the same structure....

Hankel operators and the Dixmier trace on strictly pseudoconvex domains

Czech Academy of Sciences Publication Activity Database

Engliš, Miroslav; Zhang, G.

2010-01-01

Roč. 15, - (2010), s. 601-622 ISSN 1431-0643 R&D Projects: GA AV ČR IAA100190802 Keywords : Hankel operator * Dixmier trace * Levi form Subject RIV: BA - General Mathematics Impact factor: 0.620, year: 2010 http://www.math.uiuc.edu/documenta/vol-15/18.html

The optimal digital filters of sine and cosine transforms for geophysical transient electromagnetic method

Science.gov (United States)

Zhao, Yun-wei; Zhu, Zi-qiang; Lu, Guang-yin; Han, Bo

2018-03-01

The sine and cosine transforms implemented with digital filters have been used in the Transient electromagnetic methods for a few decades. Kong (2007) proposed a method of obtaining filter coefficients, which are computed in the sample domain by Hankel transform pair. However, the curve shape of Hankel transform pair changes with a parameter, which usually is set to be 1 or 3 in the process of obtaining the digital filter coefficients of sine and cosine transforms. First, this study investigates the influence of the parameter on the digital filter algorithm of sine and cosine transforms based on the digital filter algorithm of Hankel transform and the relationship between the sine, cosine function and the ±1/2 order Bessel function of the first kind. The results show that the selection of the parameter highly influences the precision of digital filter algorithm. Second, upon the optimal selection of the parameter, it is found that an optimal sampling interval s also exists to achieve the best precision of digital filter algorithm. Finally, this study proposes four groups of sine and cosine transform digital filter coefficients with different length, which may help to develop the digital filter algorithm of sine and cosine transforms, and promote its application.

Control configuration selection for bilinear systems via generalised Hankel interaction index array

DEFF Research Database (Denmark)

Shaker, Hamid Reza; Tahavori, Maryamsadat

2015-01-01

configuration selection. It is well known that a suitable control configuration selection is an important prerequisite for a successful industrial control. In this paper the problem of control configuration selection for multiple-input and multiple-output (MIMO) bilinear processes is addressed. First...... way, an iterative method for solving the generalised Sylvester equation is proposed. The generalised cross-gramian is used to form the generalised Hankel interaction index array. The generalised Hankel interaction index array is used for control configuration selection of MIMO bilinear processes. Most......Decentralised and partially decentralised control strategies are very popular in practice. To come up with a suitable decentralised or partially decentralised control structure, it is important to select the appropriate input and output pairs for control design. This procedure is called control...

Calculation of One-dimensional Forward Modelling of Helicopter-borne Electromagnetic Data and a Sensitivity Matrix Using Fast Hankel Transforms

Directory of Open Access Journals (Sweden)

Abolfazl Asadian

2014-06-01

Full Text Available The helicopter-borne electromagnetic (HEM frequency-domain exploration method is an airborne electromagnetic (AEM technique that is widely used for vast and rough areas for resistivity imaging. The vast amount of digitized data flowing from the HEM method requires an efficient and accurate inversion algorithm. Generally, the inverse modelling of HEM data in the first step requires a precise and efficient technique provided by a forward modelling algorithm. The exact calculation of the sensitivity matrix or Jacobian is also of the utmost importance. As such, the main objective of this study is to design an efficient algorithm for the forward modelling of HEM frequency-domain data for the configuration of horizontal coplanar (HCP coils using fast Hankel transforms (FHTs. An attempt is also made to use an analytical approach to derive the required equations for the Jacobian matrix. To achieve these goals, an elaborated algorithm for the simultaneous calculation of the forward computation and sensitivity matrix is provided. Finally, using two synthetic models, the accuracy of the calculations of the proposed algorithm is verified. A comparison indicates that the obtained results of forward modelling are highly consistent with those reported in Simon et al. (2009 for a four-layer model. Furthermore, the comparison of the results for the sensitivity matrix for a two-layer model with those obtained from software is being used by the BGR Centre in Germany, showing that the proposed algorithm enjoys a high degree of accuracy in calculating this matrix.

Transform analysis of generalized functions

CERN Document Server

Misra, O P

1986-01-01

Transform Analysis of Generalized Functions concentrates on finite parts of integrals, generalized functions and distributions. It gives a unified treatment of the distributional setting with transform analysis, i.e. Fourier, Laplace, Stieltjes, Mellin, Hankel and Bessel Series.Included are accounts of applications of the theory of integral transforms in a distributional setting to the solution of problems arising in mathematical physics. Information on distributional solutions of differential, partial differential equations and integral equations is conveniently collected here.The volume will

Generalized Fourier transforms Fk,a

DEFF Research Database (Denmark)

Salem, Ben Said; Kobayashi, Toshiyuki; Ørsted, Bent

2009-01-01

We construct a two-parameter family of actions ωk,a of the Lie algebra by differential-difference operators on . Here, k is a multiplicity-function for the Dunkl operators, and a>0 arises from the interpolation of the Weil representation and the minimal unitary representation of the conformal gro...... of our semigroup Ωk,a provides us with (k,a) -generalized Fourier transforms , which includes the Dunkl transform ( a=2 ) and a new unitary operator ( a=1 ) as a Dunkl-type generalization of the classical Hankel transform....

Toeplitz and Hankel operators and Dixmier trances on the unit ball of C-n

Czech Academy of Sciences Publication Activity Database

Engliš, Miroslav; Guo, K.; Zhang, G.

2009-01-01

Roč. 137, č. 11 (2009), s. 3669-3678 ISSN 0002-9939 R&D Projects: GA ČR(CZ) GA201/06/0128 Institutional research plan: CEZ:AV0Z10190503 Keywords : Schatten-von Neumann classes * Macaev classes * trace * Dixmier trace * Toeplitz operators * Hankel operators Subject RIV: BA - General Mathematics Impact factor: 0.640, year: 2009

Toeplitz and Hankel operators and Dixmier trances on the unit ball of C-n

Czech Academy of Sciences Publication Activity Database

Engliš, Miroslav; Guo, K.; Zhang, G.

2009-01-01

Roč. 137, č. 11 (2009), s. 3669-3678 ISSN 0002-9939 R&D Projects: GA ČR(CZ) GA201/06/0128 Institutional research plan: CEZ:AV0Z10190503 Keywords : Schatten- von Neumann classes * Macaev classes * trace * Dixmier trace * Toeplitz operators * Hankel operators Subject RIV: BA - General Mathematics Impact factor: 0.640, year: 2009

Hankel Matrix Correlation Function-Based Subspace Identification Method for UAV Servo System

Directory of Open Access Journals (Sweden)

Minghong She

2018-01-01

Full Text Available For the identification problem of closed-loop subspace model, we propose a zero space projection method based on the estimation of correlation function to fill the block Hankel matrix of identification model by combining the linear algebra with geometry. By using the same projection of related data in time offset set and LQ decomposition, the multiplication operation of projection is achieved and dynamics estimation of the unknown equipment system model is obtained. Consequently, we have solved the problem of biased estimation caused when the open-loop subspace identification algorithm is applied to the closed-loop identification. A simulation example is given to show the effectiveness of the proposed approach. In final, the practicability of the identification algorithm is verified by hardware test of UAV servo system in real environment.

Higher order Riesz transforms associated with Bessel operators

Science.gov (United States)

Betancor, Jorge J.; Fariña, Juan C.; Martinez, Teresa; Rodríguez-Mesa, Lourdes

2008-10-01

In this paper we investigate Riesz transforms R μ ( k) of order k≥1 related to the Bessel operator Δμ f( x)=- f”( x)-((2μ+1)/ x) f’( x) and extend the results of Muckenhoupt and Stein for the conjugate Hankel transform (a Riesz transform of order one). We obtain that for every k≥1, R μ ( k) is a principal value operator of strong type ( p, p), p∈(1,∞), and weak type (1,1) with respect to the measure dλ( x)= x 2μ+1 dx in (0,∞). We also characterize the class of weights ω on (0,∞) for which R μ ( k) maps L p (ω) into itself and L 1(ω) into L 1,∞(ω) boundedly. This class of weights is wider than the Muckenhoupt class mathcal{A}p^μ of weights for the doubling measure dλ. These weighted results extend the ones obtained by Andersen and Kerman.

Correspondence between quantum-optical transform and classical-optical transform explored by developing Dirac's symbolic method

Science.gov (United States)

Fan, Hong-yi; Hu, Li-yun

2012-06-01

By virtue of the new technique of performing integration over Dirac's ket-bra operators, we explore quantum optical version of classical optical transformations such as optical Fresnel transform, Hankel transform, fractional Fourier transform, Wigner transform, wavelet transform and Fresnel-Hadmard combinatorial transform etc. In this way one may gain benefit for developing classical optics theory from the research in quantum optics, or vice-versa. We cannot only find some new quantum mechanical unitary operators which correspond to the known optical transformations, deriving a new theorem for calculating quantum tomogram of density operators, but also can reveal some new classical optical transformations. For examples, we find the generalized Fresnel operator (GFO) to correspond to the generalized Fresnel transform (GFT) in classical optics. We derive GFO's normal product form and its canonical coherent state representation and find that GFO is the loyal representation of symplectic group multiplication rule. We show that GFT is just the transformation matrix element of GFO in the coordinate representation such that two successive GFTs is still a GFT. The ABCD rule of the Gaussian beam propagation is directly demonstrated in the context of quantum optics. Especially, the introduction of quantum mechanical entangled state representations opens up a new area in finding new classical optical transformations. The complex wavelet transform and the condition of mother wavelet are studied in the context of quantum optics too. Throughout our discussions, the coherent state, the entangled state representation of the two-mode squeezing operators and the technique of integration within an ordered product (IWOP) of operators are fully used. All these have confirmed Dirac's assertion: "...for a quantum dynamic system that has a classical analogue, unitary transformation in the quantum theory is the analogue of contact transformation in the classical theory".

Beam propagation modeling of modified volume Fresnel zone plates fabricated by femtosecond laser direct writing.

Science.gov (United States)

Srisungsitthisunti, Pornsak; Ersoy, Okan K; Xu, Xianfan

2009-01-01

Light diffraction by volume Fresnel zone plates (VFZPs) is simulated by the Hankel transform beam propagation method (Hankel BPM). The method utilizes circularly symmetric geometry and small step propagation to calculate the diffracted wave fields by VFZP layers. It is shown that fast and accurate diffraction results can be obtained with the Hankel BPM. The results show an excellent agreement with the scalar diffraction theory and the experimental results. The numerical method allows more comprehensive studies of the VFZP parameters to achieve higher diffraction efficiency.

SVD and Hankel matrix based de-noising approach for ball bearing fault detection and its assessment using artificial faults

Science.gov (United States)

Golafshan, Reza; Yuce Sanliturk, Kenan

2016-03-01

Ball bearings remain one of the most crucial components in industrial machines and due to their critical role, it is of great importance to monitor their conditions under operation. However, due to the background noise in acquired signals, it is not always possible to identify probable faults. This incapability in identifying the faults makes the de-noising process one of the most essential steps in the field of Condition Monitoring (CM) and fault detection. In the present study, Singular Value Decomposition (SVD) and Hankel matrix based de-noising process is successfully applied to the ball bearing time domain vibration signals as well as to their spectrums for the elimination of the background noise and the improvement the reliability of the fault detection process. The test cases conducted using experimental as well as the simulated vibration signals demonstrate the effectiveness of the proposed de-noising approach for the ball bearing fault detection.

Sparse-matrix factorizations for fast symmetric Fourier transforms

International Nuclear Information System (INIS)

Sequel, J.

1987-01-01

This work proposes new fast algorithms computing the discrete Fourier transform of certain families of symmetric sequences. Sequences commonly found in problems of structure determination by x-ray crystallography and in numerical solutions of boundary-value problems in partial differential equations are dealt with. In the algorithms presented, the redundancies in the input and output data, due to the presence of symmetries in the input data sequence, were eliminated. Using ring-theoretical methods a matrix representation is obtained for the remaining calculations; which factors as the product of a complex block-diagonal matrix times as integral matrix. A basic two-step algorithm scheme arises from this factorization with a first step consisting of pre-additions and a second step containing the calculations involved in computing with the blocks in the block-diagonal factor. These blocks are structured as block-Hankel matrices, and two sparse-matrix factoring formulas are developed in order to diminish their arithmetic complexity

Fast Hankel Transform Algorithms for Optical Beam Propagation

National Research Council Canada - National Science Library

Pritchett, Timothy

2001-01-01

.... This problem may be solved numerically with the well-known 'split-step' procedure, in which the effects of propagation are computed separately from those arising from nonlinear absorption and refraction...

Classical Optical Transforms Studied in the Context of Quantum Optics via the Route of Developing Dirac's Symbolic Method

Science.gov (United States)

Fan, Hong-Yi; Lu, Hai-Liang

Via the route of developing Dirac's symbolic method and following Dirac's assertion: "⋯ for a quantum dynamic system that has a classical analogue, unitary transformation in the quantum theory is the analogue of contact transformation in the classical theory", we find the generalized Fresnel operator (GFO) corresponding to the generalized Fresnel transform (GFT) in classical optics. We derive GFO's normal product form and its canonical coherent state representation and find that GFO is the loyal representation of symplectic group multiplication rule. We show that GFT is just the transformation matrix element of GFO in the coordinate representation such that two successive GFTs is still a GFT. The ABCD rule of the Gaussian beam propagation is directly demonstrated in quantum optics. With the aid of entangled state representation the entangled Fresnel transform is proposed; new eigenfunctions of the complex fractional Fourier transform and fractional Hankel transform are obtained; the two-variable Hermite eigenmodes of light propagation are used in studying the Talbot effect in quadratic-index media; the complex wavelet transform and the condition of mother wavelet are studied in the context of quantum optics too. Moreover, quantum optical version of classical z-transforms is obtained on the basis of the eigenvector of creation operator. Throughout our discussions, the coherent state, squeezing operators and the technique of integration within an ordered product (IWOP) of operators are fully used.

An Analytical Method of Auxiliary Sources Solution for Plane Wave Scattering by Impedance Cylinders

DEFF Research Database (Denmark)

Larsen, Niels Vesterdal; Breinbjerg, Olav

2004-01-01

Analytical Method of Auxiliary Sources solutions for plane wave scattering by circular impedance cylinders are derived by transformation of the exact eigenfunction series solutions employing the Hankel function wave transformation. The analytical Method of Auxiliary Sources solution thus obtained...

Three-dimensional transport theory: An analytical solution of an internal beam searchlight problem-I

International Nuclear Information System (INIS)

Williams, M.M.R.

2009-01-01

We describe a number of methods for obtaining analytical solutions and numerical results for three-dimensional one-speed neutron transport problems in a half-space containing a variety of source shapes which emit neutrons mono-directionally. For example, we consider an off-centre point source, a ring source and a disk source, or any combination of these, and calculate the surface scalar flux as a function of the radial and angular co-ordinates. Fourier transforms in the transverse directions are used and a Laplace transform in the axial direction. This enables the Wiener-Hopf method to be employed, followed by an inverse Fourier-Hankel transform. Some additional transformations are introduced which enable the inverse Hankel transforms involving Bessel functions to be evaluated numerically more efficiently. A hybrid diffusion theory method is also described which is shown to be a useful guide to the general behaviour of the solutions of the transport equation.

Discontinuities in an axisymmetric generalized thermoelastic problem

Directory of Open Access Journals (Sweden)

Moncef Aouadi

2005-06-01

Full Text Available This paper deals with discontinuities analysis in the temperature, displacement, and stress fields of a thick plate whose lower and upper surfaces are traction-free and subjected to a given axisymmetric temperature distribution. The analysis is carried out under three thermoelastic theories. Potential functions together with Laplace and Hankel transform techniques are used to derive the solution in the transformed domain. Exact expressions for the magnitude of discontinuities are computed by using an exact method developed by Boley (1962. It is found that there exist two coupled waves, one of which is elastic and the other is thermal, both propagating with finite speeds with exponential attenuation, and a third which is called shear wave, propagating with constant speed but with no exponential attenuation. The Hankel transforms are inverted analytically. The inversion of the Laplace transforms is carried out using the inversion formula of the transform together with Fourier expansion techniques. Numerical results are presented graphically along with a comparison of the three theories of thermoelasticity.

3D elastic inversion of vertical seismic profiles in horizontally stratified media; Inversion elastique 3D de profils sismiques verticaux en milieux stratifies horizontalement

Energy Technology Data Exchange (ETDEWEB)

Petit, J.L.

1997-07-21

This thesis is devoted to the inversion of VSP (vertical seismic profile) seismic data in order to determine the elastic properties of horizontally stratified media. The VSP records are computed using the full wave elastic modelling in isotropic and transversely isotropic media using Hankel transform, a finite difference scheme and an inverse Hankel transform algorithm, and the propagation equations are determined and numerically solved; the importance of considering a 3D wave propagation model instead of a 1 D one is emphasized. The theoretical VSP inverse problem is then considered, with the seismic waveform inversion set as a least-squares problem, consisting in recovering the distribution of physical parameters which minimize the misfit between calculated and observed VSP. The corresponding problem requires the knowledge of the source function

Solutions to Time-Fractional Diffusion-Wave Equation in Cylindrical Coordinates

Directory of Open Access Journals (Sweden)

Povstenko YZ

2011-01-01

Full Text Available Nonaxisymmetric solutions to time-fractional diffusion-wave equation with a source term in cylindrical coordinates are obtained for an infinite medium. The solutions are found using the Laplace transform with respect to time , the Hankel transform with respect to the radial coordinate , the finite Fourier transform with respect to the angular coordinate , and the exponential Fourier transform with respect to the spatial coordinate . Numerical results are illustrated graphically.

Dynamic stress intensity factors for a longitudinal semi-elliptical ...

African Journals Online (AJOL)

elliptical crack in a thick-walled cylinder subjected to transient dynamic stresses. First, the problem of dynamic elasticity in a thick-walled cylinder is solved analytically using the finite Hankel transform. Transient pressure is assumed to act on ...

On the Solution of Point-Source Problems Using Fourier Transform and FFT Routines

Czech Academy of Sciences Publication Activity Database

Šolín, Pavel

2003-01-01

Roč. 48, č. 3 (2003), s. 227-238 ISSN 0001-7043 R&D Projects: GA ČR GP102/01/D114 Institutional research plan: CEZ:AV0Z2057903 Keywords : Maxwells equations * Bessel equation * Hankel functions Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

Convolution quotients in the production of heat in an infinite cylinder

Energy Technology Data Exchange (ETDEWEB)

Battig, A; Kalla, S L [Universidad Nacional de Tucuman (Argentina). Facultad de Ciencias Exactas y Tecnologia

1974-12-01

A solution of the problem of heat production in an infinite cylinder is considered by an appeal to the concept of convolution quotients and finite Hankel transforms. The result given by Erdelyi follows as a particular case of the result established here.

On the generalized Hankel±Clifford transformation of arbitrary order

Indian Academy of Sciences (India)

Е5Ж where C Y ЕxyЖИЕxyЖЕ З Жa2 J └ Е2. БББББ xy p. Ж is a generalized Bessel±Clifford function of first kind of order Е └ Ж, satisfying the differential equation xyHH └ Е З └ 1ЖyHЗ. Е x└1 З 1Жy И 0, which can be inverted by formulae. Proc. Indian Acad. Sci. (Math. Sci.), Vol. 110, No. 3, August 2000, pp. 293±304.

3-D electromagnetic modeling for very early time sounding of shallow targets using integral equations

International Nuclear Information System (INIS)

Xiong, Z.; Tripp, A.C.

1994-01-01

This paper presents an integral equation algorithm for 3D EM modeling at high frequencies for applications in engineering an environmental studies. The integral equation method remains the same for low and high frequencies, but the dominant roles of the displacements currents complicate both numerical treatments and interpretations. With singularity extraction technique they successively extended the application of the Hankel filtering technique to the computation of Hankel integrals occurring in high frequency EM modeling. Time domain results are calculated from frequency domain results via Fourier transforms. While frequency domain data are not obvious for interpretations, time domain data show wave-like pictures that resemble seismograms. Both 1D and 3D numerical results show clearly the layer interfaces

Thermal deformation in a thin circular plate due to a partially ...

Indian Academy of Sciences (India)

On applying the finite Hankel and the finite Fourier transforms to (1) to (10) and then using their inversions ... differential equation satisfied by “the resultant force function” F is d dr. [∇2F] = − .... and also thank the U.G.C. for financial support.

Exact solution of an electroosmotic flow for generalized Burgers fluid in cylindrical domain

Directory of Open Access Journals (Sweden)

Masood Khan

Full Text Available The present paper reports a theoretical study of the dynamics of an electroosmotic flow (EOF in cylindrical domain. The Cauchy momentum equation is first simplified by incorporating the electrostatic body force in the electric double layer and the generalized Burgers fluid constitutive model. The electric potential distribution is given by the linearized Poisson–Boltzmann equation. After solving the linearized Poisson–Boltzmann equation, the Cauchy momentum equation with electrostatic body force is solved analytically by using the temporal Fourier and finite Hankel transforms. The effects of important involved parameters are examined and presented graphically. The results obtained reveal that the magnitude of velocity increases with increase of the Debye–Huckel and electrokinetic parameters. Further, it is shown that the results presented for generalized Burgers fluid are quite general so that results for the Burgers, Oldroyd-B, Maxwell and Newtonian fluids can be obtained as limiting cases. Keywords: Generalized Burgers fluid, Electroosmotic flow, Fourier and Hankel transform

Forward modelling of multi-component induction logging tools in layered anisotropic dipping formations

International Nuclear Information System (INIS)

Gao, Jie; Xu, Chenhao; Xiao, Jiaqi

2013-01-01

Multi-component induction logging provides great assistance in the exploration of thinly laminated reservoirs. The 1D parametric inversion following an adaptive borehole correction is the key step in the data processing of multi-component induction logging responses. To make the inversion process reasonably fast, an efficient forward modelling method is necessary. In this paper, a modelling method has been developed to simulate the multi-component induction tools in deviated wells drilled in layered anisotropic formations. With the introduction of generalized reflection coefficients, the analytic expressions of magnetic field in the form of a Sommerfeld integral were derived. The fast numerical computation of the integral has been completed by using the fast Fourier–Hankel transform and fast Hankel transform methods. The latter is so time efficient that it is competent enough for real-time multi-parameter inversion. In this paper, some simulated results have been presented and they are in excellent agreement with the finite difference method code's solution. (paper)

Journal of Earth System Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Earth System Science. Pravin K Gupta. Articles written in Journal of Earth System Science. Volume 115 Issue 3 June 2006 pp 267-276. Fast computation of Hankel Transform using orthonormal exponential approximation of complex kernel function · Pravin K Gupta Sri Niwas Neeta Chaudhary.

Novel target design algorithm for two-dimensional optical storage (TwoDOS)

NARCIS (Netherlands)

Huang, Li; Chong, T.C.; Vijaya Kumar, B.V.K.; Kobori, H.

2004-01-01

In this paper we introduce the Hankel transform based channel model of Two-Dimensional Optical Storage (TwoDOS) system. Based on this model, the two-dimensional (2D) minimum mean-square error (MMSE) equalizer has been derived and applied to some simple but common cases. The performance of the 2D

On a non-self adjoint eigenfunction expansion

Directory of Open Access Journals (Sweden)

D. Naylor

1984-01-01

Full Text Available This paper develops a formula of inversion for an integral transform similar to that associated with the names of Kontorovich and Lebedev. The kernel involves the Hankel function Hu(1(kr, in which r varies over a truncated infinite interval a≤r0 and the parameter k is complex. This kind of transform is useful in the investigation of functions that satisfy the Helmholtz equation and the condition of radiation.

General solution of Poisson equation in three dimensions for disk-like galaxies

International Nuclear Information System (INIS)

Tong, Y.; Zheng, X.; Peng, O.

1982-01-01

The general solution of the Poisson equation is solved by means of integral transformations for Vertical BarkVertical Barr>>1 provided that the perturbed density of disk-like galaxies distributes along the radial direction according to the Hankel function. This solution can more accurately represent the outer spiral arms of disk-like galaxies

Bessel equation as an operator identity's matrix element in quantum mechanics

International Nuclear Information System (INIS)

Fan Hongyi; Li Chao

2004-01-01

We study the well-known Bessel equation itself in the framework of quantum mechanics. We show that the Bessel equation is a spontaneous result of an operator identity's matrix element in some definite entangled state representations, which is a fresh look. Application of this operator formalism in the Hankel transform of Laplace equation is presented

An analytical solution for the two-group kinetic neutron diffusion equation in cylindrical geometry

International Nuclear Information System (INIS)

Fernandes, Julio Cesar L.; Vilhena, Marco Tullio; Bodmann, Bardo Ernst

2011-01-01

Recently the two-group Kinetic Neutron Diffusion Equation with six groups of delay neutron precursor in a rectangle was solved by the Laplace Transform Technique. In this work, we report on an analytical solution for this sort of problem but in cylindrical geometry, assuming a homogeneous and infinite height cylinder. The solution is obtained applying the Hankel Transform to the Kinetic Diffusion equation and solving the transformed problem by the same procedure used in the rectangle. We also present numerical simulations and comparisons against results available in literature. (author)

Gauss and Markov quadrature formulae with nodes at zeros of eigenfunctions of a Sturm-Liouville problem, which are exact for entire functions of exponential type

International Nuclear Information System (INIS)

Gorbachev, D V; Ivanov, V I

2015-01-01

Gauss and Markov quadrature formulae with nodes at zeros of eigenfunctions of a Sturm-Liouville problem, which are exact for entire functions of exponential type, are established. They generalize quadrature formulae involving zeros of Bessel functions, which were first designed by Frappier and Olivier. Bessel quadratures correspond to the Fourier-Hankel integral transform. Some other examples, connected with the Jacobi integral transform, Fourier series in Jacobi orthogonal polynomials and the general Sturm-Liouville problem with regular weight are also given. Bibliography: 39 titles

Some Integral Relations of Hankel Transform Type and Applications to Elasticity Theory

DEFF Research Database (Denmark)

Krenk, Steen

1982-01-01

of a complicated bounded kernel. The static problem of a circular crack in an infinite elastic body under general loads is used to illustrate vector boundary conditions leading to two coupled integral equations, while the problem of a vibrating flexible circular plate in frictionless contact with an elastic half...... space is solved by use of the associated numerical method....

Revisiting the orthogonality of Bessel functions of the first kind on an infinite interval

International Nuclear Information System (INIS)

Leon, J Ponce de

2015-01-01

The rigorous proof of the orthogonality integral ∫ 0 ∞ ρ J ν (kρ)J ν (k ′ ρ) dρ=((δ(k−k ′ ))/k), for ν>=−1, is laborious and requires the use of mathematical techniques that, probably, are unfamiliar to most physics students, even at the graduate level. In physics, we are used to the argument that it may be proved by the use of Hankel transforms. However, the logic of the matter is the opposite, i.e., the existence of the inverse Hankel transform is a consequence of the orthogonality integral. The goal of this work is to prove this integral without circular reasoning. In this paper, using elementary properties of Bessel functions, we give a simple analytical derivation of this integral for the case where ν is an integer, zero, or half-integer not less than −1/2. Then, using the asymptotic behaviour of J ν (x), we extend the result to any ν>=−1. This work is of a pedagogical nature. Therefore, to add educational value to the discussion, we do not skip the details of the calculations. (paper)

Limits of performance for the model reduction problem of hidden Markov models

KAUST Repository

Kotsalis, Georgios

2015-12-15

We introduce system theoretic notions of a Hankel operator, and Hankel norm for hidden Markov models. We show how the related Hankel singular values provide lower bounds on the norm of the difference between a hidden Markov model of order n and any lower order approximant of order n̂ < n.

Limits of performance for the model reduction problem of hidden Markov models

KAUST Repository

Kotsalis, Georgios; Shamma, Jeff S.

2015-01-01

We introduce system theoretic notions of a Hankel operator, and Hankel norm for hidden Markov models. We show how the related Hankel singular values provide lower bounds on the norm of the difference between a hidden Markov model of order n and any lower order approximant of order n̂ < n.

On three phase lags thermodi¤usion theory in micropolar porous circular plate

Directory of Open Access Journals (Sweden)

Rajneesh Kumar

2017-09-01

Full Text Available The present work examines a two dimensional axisymmetric problem of micropolar porous thermodi¤usion circular plate due to thermal and chemical potential sources. The governing equations are solved by using the potential function. The expressions of displacements, microrotation, volume fraction field, temperature distribution, concentration and stresses are obtained in the transformed domain by using Laplace and Hankel transforms. The inversion of transforms using Fourier expansion techniques has been applied to obtain the results in the physical domain. The numerical results for resulting quantities are obtained and depicted graphically to show the influence of porosity, relaxation time, phase lags, with and without energy dissipation on the resulting quantities. Some particular cases are also deduced.

Analysis of a Segmented Annular Coplanar Capacitive Tilt Sensor with Increased Sensitivity

OpenAIRE

Jiahao Guo; Pengcheng Hu; Jiubin Tan

2016-01-01

An investigation of a segmented annular coplanar capacitor is presented. We focus on its theoretical model, and a mathematical expression of the capacitance value is derived by solving a Laplace equation with Hankel transform. The finite element method is employed to verify the analytical result. Different control parameters are discussed, and each contribution to the capacitance value of the capacitor is obtained. On this basis, we analyze and optimize the structure parameters of a segmented...

Electromagnetic diffraction by an impedance cylinder buried halfway between two half-spaces

KAUST Repository

Salem, Mohamed; Kamel, Aladin Hassan

2011-01-01

We consider the problem of electromagnetic diffraction from a cylinder with impedance surface and half-buried between two dielectric media. An arbitrary located electric dipole provides the excitation. The harmonic solution is presented as a series sum over a spectrum of a discrete-index Hankel transform, and the spectral amplitudes are determined by solving an infinite linear system of equations, which is constructed by applying the orthogonality relation of the 1D Green's function. © 2011 IEEE.

Electromagnetic diffraction by an impedance cylinder buried halfway between two half-spaces

KAUST Repository

Salem, Mohamed

2011-08-01

We consider the problem of electromagnetic diffraction from a cylinder with impedance surface and half-buried between two dielectric media. An arbitrary located electric dipole provides the excitation. The harmonic solution is presented as a series sum over a spectrum of a discrete-index Hankel transform, and the spectral amplitudes are determined by solving an infinite linear system of equations, which is constructed by applying the orthogonality relation of the 1D Green\\'s function. © 2011 IEEE.

The dynamic response and perturbation of magnetic field vector of orthotropic cylinders under various shock loads

International Nuclear Information System (INIS)

Dai, H.L.; Wang, X.

2006-01-01

In this paper, an analytical method is introduced to solve the problem for the dynamic stress-focusing and centred-effect of perturbation of the magnetic field vector in orthotropic cylinders under thermal and mechanical shock loads. Analytical expressions for the dynamic stresses and the perturbation of the magnetic field vector are obtained by means of finite Hankel transforms and Laplace transforms. The response histories of dynamic stresses and the perturbation of the field vector are also obtained. In practical examples, the dynamic focusing effect on both magnetoelastic stress and perturbation of the axial magnetic field vector in an orthotropic cylinder subjected to various shock loads is presented and discussed

Perturbation theory in angular quantization approach and the expectation values of exponential fields in sine-Gordon model

International Nuclear Information System (INIS)

Poghossian, R.H.

2000-01-01

In an angular quantization approach a perturbation theory for the Massive Thirring Model (MTM) is developed, which allows us to calculate vacuum expectation values of exponential fields in sine-Gordon theory near the free fermion point in first order of the MTM coupling constant g. The Hankel transforms play an important role when carrying out these calculations. The expression we have found coincides with that of the direct expansion over g of the exact formula conjectured by Lukyanov and Zamolodchikov

Exact Solution of Fractional Diffusion Model with Source Term used in Study of Concentration of Fission Product in Uranium Dioxide Particle

International Nuclear Information System (INIS)

Fang Chao; Cao Jianzhu; Sun Lifeng

2011-01-01

The exact solution of fractional diffusion model with a location-independent source term used in the study of the concentration of fission product in spherical uranium dioxide (UO 2 ) particle is built. The adsorption effect of the fission product on the surface of the UO 2 particle and the delayed decay effect are also considered. The solution is given in terms of Mittag-Leffler function with finite Hankel integral transformation and Laplace transformation. At last, the reduced forms of the solution under some special physical conditions, which is used in nuclear engineering, are obtained and corresponding remarks are given to provide significant exact results to the concentration analysis of nuclear fission products in nuclear reactor. (nuclear physics)

Towards a 3D modelling of the microwave photo-induced load in CPW technology

Science.gov (United States)

Gary, Rene; Arnould, Jean-Daniel; Vilcot, Anne

2005-09-01

The optical control study works on both the optical and the microwave behaviours of the plasma photo-induced in the semiconductor enlightened by a laser beam. The presented study is based on the necessity to be able to foresee the microwave response of CPW microwave devices versus different optical powers and different kinds of optical fibers, single-mode or multimode. The optical part has been achieved analytically by solving the diffusion equation of photo-induced carriers using the Hankel transform in 3-Dimensions. The added value of this technique is its precision and fastness. For the electromagnetic part we have chosen to use CST Microwave Studio software, which solves numerically Maxwell's equations with a Finite Integration Technique (FIT). For this aim we have had to model the photo-induced load using the locally changed conductivity directly depending of the excess carriers distribution. In the final paper, the first part will deal with the analytical computation of the photo-induced excess carrier in silicon substrate using the Hankel transform under permanent enlightening. Then the explanation of the model will be based on the need of a 3-Dimension model that may be described in an electromagnetic software. Finally simulation results of simple CPW devices as stub will be compared to measurements. In conclusion, we will show that the model is suitable for designing more complex devices and that it can be simplified in case of low precision needs.

Quantum Hilbert matrices and orthogonal polynomials

DEFF Research Database (Denmark)

Andersen, Jørgen Ellegaard; Berg, Christian

2009-01-01

Using the notion of quantum integers associated with a complex number q≠0 , we define the quantum Hilbert matrix and various extensions. They are Hankel matrices corresponding to certain little q -Jacobi polynomials when |q|<1 , and for the special value they are closely related to Hankel matrice...

An asymptotic analysis for an integrable variant of the Lotka–Volterra prey–predator model via a determinant expansion technique

Directory of Open Access Journals (Sweden)

Masato Shinjo

2015-12-01

Full Text Available The Hankel determinant appears in representations of solutions to several integrable systems. An asymptotic expansion of the Hankel determinant thus plays a key role in the investigation of asymptotic analysis of such integrable systems. This paper presents an asymptotic expansion formula of a certain Casorati determinant as an extension of the Hankel case. This Casorati determinant is then shown to be associated with the solution to the discrete hungry Lotka–Volterra (dhLV system, which is an integrable variant of the famous prey–predator model in mathematical biology. Finally, the asymptotic behavior of the dhLV system is clarified using the expansion formula for the Casorati determinant.

Quasi-Stationary Temperature Field of Two-Layer Half-Space with Moving Boundary

Directory of Open Access Journals (Sweden)

P. A. Vlasov

2015-01-01

Full Text Available Due to intensive introduction of mathematical modeling methods into engineering practice, analytical methods for solving problems of heat conduction theory along with computational methods become increasingly important. Despite the well-known limitations of the analytical method applicability, this trend is caused by many reasons. In particular, solutions of the appropriate problems presented in analytically closed form can be used to test the new efficient computational algorithms, to carry out a parametric study of the temperature field of the analyzed system and to explore specific features of its formation, to formulate and solve optimization problems. In addition, these solutions allow us to explore the possibility for simplifying mathematical model with retaining its adequacy to the studied process.The main goal of the conducted research is to provide an analytically closed-form solution to the problem of finding the quasi-stationary temperature field of the system, which is simulated by isotropic half-space with isotropic coating of constant thickness. The outer boundary of this system is exposed to the Gaussian-type heat flux and uniformly moves in parallel with itself.A two-dimensional mathematical model that takes into account the axial symmetry of the studied process has been used. After the transition to a moving coordinate system rigidly associated with a moving boundary the Hankel integral transform of zero order (with respect to the radial variable and the Laplace transform (with respect to the temporal variable were used. Next, the image of the Hankel transform for the stationary temperature field of the system with respect to the moving coordinate system was found using a limit theorem of operational calculus. This allowed representing the required quasi-stationary field in the form of an improper integral of the first kind, which depends on the parameters. This result obtained can be used to conduct a parametric study and solve

Completeness, special functions and uncertainty principles over q-linear grids

International Nuclear Information System (INIS)

Abreu, LuIs Daniel

2006-01-01

We derive completeness criteria for sequences of functions of the form f(xλ n ), where λ n is the nth zero of a suitably chosen entire function. Using these criteria, we construct complete nonorthogonal systems of Fourier-Bessel functions and their q-analogues, as well as other complete sets of q-special functions. We discuss connections with uncertainty principles over q-linear grids and the completeness of certain sets of q-Bessel functions is used to prove that, if a function f and its q-Hankel transform both vanish at the points {q -n } ∞ n=1 , 0 n } ∞ n=-∞

On increasing stability in the two dimensional inverse source scattering problem with many frequencies

Science.gov (United States)

Entekhabi, Mozhgan Nora; Isakov, Victor

2018-05-01

In this paper, we will study the increasing stability in the inverse source problem for the Helmholtz equation in the plane when the source term is assumed to be compactly supported in a bounded domain Ω with a sufficiently smooth boundary. Using the Fourier transform in the frequency domain, bounds for the Hankel functions and for scattering solutions in the complex plane, improving bounds for the analytic continuation, and the exact observability for the wave equation led us to our goals which are a sharp uniqueness and increasing stability estimate when the wave number interval is growing.

2-D unitary ESPRIT-like direction-of-arrival (DOA) estimation for coherent signals with a uniform rectangular array.

Science.gov (United States)

Ren, Shiwei; Ma, Xiaochuan; Yan, Shefeng; Hao, Chengpeng

2013-03-28

A unitary transformation-based algorithm is proposed for two-dimensional (2-D) direction-of-arrival (DOA) estimation of coherent signals. The problem is solved by reorganizing the covariance matrix into a block Hankel one for decorrelation first and then reconstructing a new matrix to facilitate the unitary transformation. By multiplying unitary matrices, eigenvalue decomposition and singular value decomposition are both transformed into real-valued, so that the computational complexity can be reduced significantly. In addition, a fast and computationally attractive realization of the 2-D unitary transformation is given by making a Kronecker product of the 1-D matrices. Compared with the existing 2-D algorithms, our scheme is more efficient in computation and less restrictive on the array geometry. The processing of the received data matrix before unitary transformation combines the estimation of signal parameters via rotational invariance techniques (ESPRIT)-Like method and the forward-backward averaging, which can decorrelate the impinging signalsmore thoroughly. Simulation results and computational order analysis are presented to verify the validity and effectiveness of the proposed algorithm.

Influence of non-integer-order derivatives on unsteady unidirectional motions of an Oldroyd-B fluid with generalized boundary conditions

Science.gov (United States)

Zafar, A. A.; Riaz, M. B.; Shah, N. A.; Imran, M. A.

2018-03-01

The objective of this article is to study some unsteady Couette flows of an Oldroyd-B fluid with non-integer derivatives. The fluid fills an annular region of two infinite co-axial circular cylinders. Flows are due to the motion of the outer cylinder, that rotates about its axis with an arbitrary time-dependent velocity while the inner cylinder is held fixed. Closed form solutions of dimensionless velocity field and tangential tension are obtained by means of the finite Hankel transform and the theory of Laplace transform for fractional calculus. Several results in the literature including the rotational flows through an infinite cylinder can be obtained as limiting cases of our general solutions. Finally, the control of the fractional framework on the dynamics of fluid is analyzed by numerical simulations and graphical illustrations.

Magnetic field effect on blood flow of Casson fluid in axisymmetric cylindrical tube: A fractional model

Energy Technology Data Exchange (ETDEWEB)

Ali, Farhad, E-mail: farhadaliecomaths@yahoo.com [Department of Mathematics, City University of Science and Information Technology, Peshawar 25000 (Pakistan); Sheikh, Nadeem Ahmad [Department of Mathematics, City University of Science and Information Technology, Peshawar 25000 (Pakistan); Khan, Ilyas [Basic Engineering Sciences Department, College of Engineering Majmaah University, Majmaah 11952 (Saudi Arabia); Saqib, Muhammad [Department of Mathematics, City University of Science and Information Technology, Peshawar 25000 (Pakistan)

2017-02-01

The effects of magnetohydrodynamics on the blood flow when blood is represented as a Casson fluid, along with magnetic particles in a horizontal cylinder is studied. The flow is due to an oscillating pressure gradient. The Laplace and finite Hankel transforms are used to obtain the closed form solutions of the fractional partial differential equations. Effects of various parameters on the flow of both blood and magnetic particles are shown graphically. The analysis shows that, the model with fractional order derivatives bring a remarkable changes as compared to the ordinary model. The study highlights that applied magnetic field reduces the velocities of both the blood and magnetic particles.

Magnetic field effect on blood flow of Casson fluid in axisymmetric cylindrical tube: A fractional model

International Nuclear Information System (INIS)

Ali, Farhad; Sheikh, Nadeem Ahmad; Khan, Ilyas; Saqib, Muhammad

2017-01-01

The effects of magnetohydrodynamics on the blood flow when blood is represented as a Casson fluid, along with magnetic particles in a horizontal cylinder is studied. The flow is due to an oscillating pressure gradient. The Laplace and finite Hankel transforms are used to obtain the closed form solutions of the fractional partial differential equations. Effects of various parameters on the flow of both blood and magnetic particles are shown graphically. The analysis shows that, the model with fractional order derivatives bring a remarkable changes as compared to the ordinary model. The study highlights that applied magnetic field reduces the velocities of both the blood and magnetic particles.

Fault Detection Algorithm based on Null-Space Analysis for On-Line Structural Health Monitoring

OpenAIRE

Yan, Ai-Min; Golinval, Jean-Claude; Marin, Frédéric

2005-01-01

Early diagnosis of structural damages or machinery malfunctions allows to reduce the maintenance cost of systems and to increase their reliability and safety. This paper addresses the damage detection problem by statistical analysis on output-only measurements of structures. The developed method is based on subspace analysis of the Hankel matrices constructed by vibration measurement data. The column active subspace of the Hankel matrix defined by the first principal components is orthonormal...

The Bargmann transform and canonical transformations

International Nuclear Information System (INIS)

Villegas-Blas, Carlos

2002-01-01

This paper concerns a relationship between the kernel of the Bargmann transform and the corresponding canonical transformation. We study this fact for a Bargmann transform introduced by Thomas and Wassell [J. Math. Phys. 36, 5480-5505 (1995)]--when the configuration space is the two-sphere S 2 and for a Bargmann transform that we introduce for the three-sphere S 3 . It is shown that the kernel of the Bargmann transform is a power series in a function which is a generating function of the corresponding canonical transformation (a classical analog of the Bargmann transform). We show in each case that our canonical transformation is a composition of two other canonical transformations involving the complex null quadric in C 3 or C 4 . We also describe quantizations of those two other canonical transformations by dealing with spaces of holomorphic functions on the aforementioned null quadrics. Some of these quantizations have been studied by Bargmann and Todorov [J. Math. Phys. 18, 1141-1148 (1977)] and the other quantizations are related to the work of Guillemin [Integ. Eq. Operator Theory 7, 145-205 (1984)]. Since suitable infinite linear combinations of powers of the generating functions are coherent states for L 2 (S 2 ) or L 2 (S 3 ), we show finally that the studied Bargmann transforms are actually coherent states transforms

Three-dimensional coupled thermoelastodynamic stress and flux induced wave propagation for isotropic half-space with scalar potential functions

Science.gov (United States)

Hayati, Yazdan; Eskandari-Ghadi, Morteza

2018-02-01

An asymmetric three-dimensional thermoelastodynamic wave propagation with scalar potential functions is presented for an isotropic half-space, in such a way that the wave may be originated from an arbitrary either traction or heat flux applied on a patch at the free surface of the half-space. The displacements, stresses and temperature are presented within the framework of Biot's coupled thermoelasticity formulations. By employing a complete representation for the displacement and temperature fields in terms of two scalar potential functions, the governing equations of coupled thermoelasticity are uncoupled into a sixth- and a second-order partial differential equation in cylindrical coordinate system. By virtue of Fourier expansion and Hankel integral transforms, the angular and radial variables are suppressed respectively, and a 6{th}- and a 2{nd}-order ordinary differential equation in terms of depth are received, which are solved readily, from which the displacement, stresses and temperature fields are derived in transformed space by satisfying both the regularity and boundary conditions. By applying the inverse Hankel integral transforms, the displacements and temperature are numerically evaluated to determine the solutions in the real space. The numerical evaluations are done for three specific cases of vertical and horizontal time-harmonic patch traction and a constant heat flux passing through a circular disc on the surface of the half-space. It has been previously proved that the potential functions used in this paper are applicable from elastostatics to thermoelastodynamics. Thus, the analytical solutions presented in this paper are verified by comparing the results of this study with two specific problems reported in the literature, which are an elastodynamic problem and an axisymmetric quasi-static thermoelastic problem. To show the accuracy of numerical results, the solution of this study is also compared with the solution for elastodynamics exists in

Fast alternating projected gradient descent algorithms for recovering spectrally sparse signals

KAUST Repository

Cho, Myung

2016-06-24

We propose fast algorithms that speed up or improve the performance of recovering spectrally sparse signals from un-derdetermined measurements. Our algorithms are based on a non-convex approach of using alternating projected gradient descent for structured matrix recovery. We apply this approach to two formulations of structured matrix recovery: Hankel and Toeplitz mosaic structured matrix, and Hankel structured matrix. Our methods provide better recovery performance, and faster signal recovery than existing algorithms, including atomic norm minimization.

Fast alternating projected gradient descent algorithms for recovering spectrally sparse signals

KAUST Repository

Cho, Myung; Cai, Jian-Feng; Liu, Suhui; Eldar, Yonina C.; Xu, Weiyu

2016-01-01

We propose fast algorithms that speed up or improve the performance of recovering spectrally sparse signals from un-derdetermined measurements. Our algorithms are based on a non-convex approach of using alternating projected gradient descent for structured matrix recovery. We apply this approach to two formulations of structured matrix recovery: Hankel and Toeplitz mosaic structured matrix, and Hankel structured matrix. Our methods provide better recovery performance, and faster signal recovery than existing algorithms, including atomic norm minimization.

Backlund transformations as canonical transformations

International Nuclear Information System (INIS)

Villani, A.; Zimerman, A.H.

1977-01-01

Toda and Wadati as well as Kodama and Wadati have shown that the Backlund transformations, for the exponential lattice equation, sine-Gordon equation, K-dV (Korteweg de Vries) equation and modifies K-dV equation, are canonical transformation. It is shown that the Backlund transformation for the Boussinesq equation, for a generalized K-dV equation, for a model equation for shallow water waves and for the nonlinear Schroedinger equation are also canonical transformations [pt

Axi-symmetric generalized thermoelastic diffusion problem with two-temperature and initial stress under fractional order heat conduction

International Nuclear Information System (INIS)

Deswal, Sunita; Kalkal, Kapil Kumar; Sheoran, Sandeep Singh

2016-01-01

A mathematical model of fractional order two-temperature generalized thermoelasticity with diffusion and initial stress is proposed to analyze the transient wave phenomenon in an infinite thermoelastic half-space. The governing equations are derived in cylindrical coordinates for a two dimensional axi-symmetric problem. The analytical solution is procured by employing the Laplace and Hankel transforms for time and space variables respectively. The solutions are investigated in detail for a time dependent heat source. By using numerical inversion method of integral transforms, we obtain the solutions for displacement, stress, temperature and diffusion fields in physical domain. Computations are carried out for copper material and displayed graphically. The effect of fractional order parameter, two-temperature parameter, diffusion, initial stress and time on the different thermoelastic and diffusion fields is analyzed on the basis of analytical and numerical results. Some special cases have also been deduced from the present investigation.

Suppression of Phase Mixing in Drift-Kinetic Plasma Turbulence

Science.gov (United States)

Parker, J. T.; Dellar, P. J.; Schekochihin, A. A.; Highcock, E. G.

2017-12-01

The solar wind and interstellar medium are examples of strongly magnetised, weakly collisional, astrophysical plasmas. Their turbulent fluctuations are strongly anisotropic, with small amplitudes, and frequencies much lower than the Larmor frequency. This regime is described by gyrokinetic theory, a reduced five-dimensional kinetic system describing averages over Larmor orbits. A turbulent plasma may transfer free energy, a measure of fluctuation amplitudes, from injection at large scales, typically by an instability, to dissipation at small physical scales like a turbulent fluid. Alternatively, a turbulent plasma may form fine scale structures in velocity space via phase-mixing, the mechanism that leads to Landau damping in linear plasma theory. Macroscopic plasma properties like heat and momentum transport are affected by both mechanisms. While each is understood in isolation, their interaction is not. We study this interaction using a Hankel-Hermite velocity space representation of gyrokinetic theory. The Hankel transform interacts neatly with the Bessel functions that arise from averaging over Larmor orbits, so the perpendicular velocity space is decoupled for linearized problems. The Hermite transform expresses phase mixing as nearest-neighbor coupling between parallel velocity space scales represented by Hermite mode numbers. We use this representation to study transfer mechanisms in drift-kinetic plasma turbulence, the long wavelength limit of gyrokinetic theory. We show that phase space is divided into two regions, with one transfer mechanism dominating in each. Most energy is contained in the region where the fluid-like nonlinear cascade dominates. Moreover, in that region the nonlinear cascade interferes with phase mixing by exciting an "anti phase mixing" transfer of free energy from small to large velocity space scales. This cancels out the usual phase mixing, and renders the overall behavior fluid-like. These results profoundly change our understanding

Transformer Protection Using the Wavelet Transform

OpenAIRE

ÖZGÖNENEL, Okan; ÖNBİLGİN, Güven; KOCAMAN, Çağrı

2014-01-01

This paper introduces a novel approach for power transformer protection algorithm. Power system signals such as current and voltage have traditionally been analysed by the Fast Fourier Transform. This paper aims to prove that the Wavelet Transform is a reliable and computationally efficient tool for distinguishing between the inrush currents and fault currents. The simulated results presented clearly show that the proposed technique for power transformer protection facilitates the a...

XFEL OSCILLATOR SIMULATION INCLUDING ANGLE-DEPENDENT CRYSTAL REFLECTIVITY

International Nuclear Information System (INIS)

Fawley, William; Lindberg, Ryan; Kim, K.-J.; Shvyd'ko, Yuri

2010-01-01

The oscillator package within the GINGER FEL simulation code has now been extended to include angle-dependent reflectivity properties of Bragg crystals. Previously, the package was modified to include frequencydependent reflectivity in order to model x-ray FEL oscillators from start-up from shot noise through to saturation. We present a summary of the algorithms used for modeling the crystal reflectivity and radiation propagation outside the undulator, discussing various numerical issues relevant to the domain of high Fresnel number and efficient Hankel transforms. We give some sample XFEL-O simulation results obtained with the angle-dependent reflectivity model, with particular attention directed to the longitudinal and transverse coherence of the radiation output.

Electrical transformer handbook

Energy Technology Data Exchange (ETDEWEB)

Hurst, R.W.; Horne, D. (eds.)

2005-07-01

This handbook is a valuable user guide intended for electrical engineering and maintenance personnel, electrical contractors and electrical engineering students. It provides current information on techniques and technologies that can help extend the life of transformers. It discusses transformer testing, monitoring, design, commissioning, retrofitting and other elements involved in keeping electrical transformers in safe and efficient operation. It demonstrates how a power transformer can be put to use and common problems faced by owners. In addition to covering control techniques, testing and maintenance procedures, this handbook covers the power transformer; control electrical power transformer; electrical power transformer; electrical theory transformer; used electrical transformer; down electrical step transformer; electrical manufacturer transformer; electrical picture transformer; electrical transformer work; electrical surplus transformer; current transformer; step down transformer; voltage transformer; step up transformer; isolation transformer; low voltage transformer; toroidal transformer; high voltage transformer; and control power transformer. The handbook includes articles from leading experts on overcurrent protection of transformers; ventilated dry-type transformers; metered load factors for low-voltage, and dry-type transformers in buildings. The maintenance of both dry-type or oil-filled transformers was discussed with reference to sealing, gaskets, oils, moisture and testing. The adoption of dynamic load practices was also discussed along with the reclamation or recycling of used lube oil, transformer dielectric fluids and aged solid insulation. A buyer's guide and directory of transformer manufacturers and suppliers was also included. refs., tabs., figs.

A new and self-contained presentation of the theory of boundary operators for slit diffraction and their logarithmic approximations

Energy Technology Data Exchange (ETDEWEB)

Gorenflo, Norbert [Beuth Hochschule fuer Technik Berlin (Germany). Fachbereich II; Kunik, Matthias [Magdeburg Univ. (Germany). Inst. fuer Analysis und Numerik

2009-07-01

We present a new and self-contained theory for mapping properties of the boundary operators for slit diffraction occurring in Sommerfeld's diffraction theory, covering two different cases of the polarisation of the light. This theory is entirely developed in the context of the boundary operators with a Hankel kernel and not based on the corresponding mixed boundary value problem for the Helmholtz equation. For a logarithmic approximation of the Hankel kernel we also study the corresponding mapping properties and derive explicit solutions together with certain regularity results. (orig.)

Generalized Cross-Gramian for Linear Systems

DEFF Research Database (Denmark)

Shaker, Hamid Reza

2012-01-01

The cross-gramian is a well-known matrix with embedded controllability and observability information. The cross-gramian is related to the Hankel operator and the Hankel singular values of a linear square system and it has several interesting properties. These properties make the cross...... square symmetric systems, the ordinary cross-gramian does not exist. To cope with this problem, a new generalized cross-gramian is introduced in this paper. In contrast to the ordinary cross-gramian, the generalized cross-gramian can be easily obtained for general linear systems and therefore can be used...

Root finding in the complex plane for seismo-acoustic propagation scenarios with Green's function solutions.

Science.gov (United States)

McCollom, Brittany A; Collis, Jon M

2014-09-01

A normal mode solution to the ocean acoustic problem of the Pekeris waveguide with an elastic bottom using a Green's function formulation for a compressional wave point source is considered. Analytic solutions to these types of waveguide propagation problems are strongly dependent on the eigenvalues of the problem; these eigenvalues represent horizontal wavenumbers, corresponding to propagating modes of energy. The eigenvalues arise as singularities in the inverse Hankel transform integral and are specified by roots to a characteristic equation. These roots manifest themselves as poles in the inverse transform integral and can be both subtle and difficult to determine. Following methods previously developed [S. Ivansson et al., J. Sound Vib. 161 (1993)], a root finding routine has been implemented using the argument principle. Using the roots to the characteristic equation in the Green's function formulation, full-field solutions are calculated for scenarios where an acoustic source lies in either the water column or elastic half space. Solutions are benchmarked against laboratory data and existing numerical solutions.

Time-dependent flow model of a generalized Burgers' fluid with fractional derivatives through a cylindrical domain: An exact and numerical approach

Science.gov (United States)

Safdar, Rabia; Imran, M.; Khalique, Chaudry Masood

2018-06-01

Exact solutions for velocity field and tangential stress for rotational flow of a generalized Burgers' fluid within an infinite circular pipe are derived by using the methods of Laplace and finite Hankel transformations. Firstly we take the position of fluid at rest and then the fluid flow due to the rotation of the pipe around the axis of flow having time dependant angular velocity. The exact solutions are presented in terms of the generalized Ga,b,c (., t) -functions. The corresponding results can be freely specified for the same results of Burgers', Oldroyd B, Maxwell, second grade and Newtonian fluids (performing the same motion) as particular cases of the results obtained earlier. The impact of the different parameters, individually and in comparison, are represented by graphical demonstrations. Secondly the numerical solutions for velocity and stress are also obtained with the help of Laplace transformation, Gaver Stehfest's algorithm and MATHCAD. Finally a comparison of both methods for the same problem is done and shows the consistency of results.

A relation connecting scale transformation, Galilean transformation and Baecklund transformation for the nonlinear Schroedinger equation

International Nuclear Information System (INIS)

Steudel, H.

1980-01-01

It is shown that the two-parameter manifold of Baecklund transformations known for the nonlinear Schroedinger equation can be generated from one Baecklund transformation with specified parameters by use of scale transformation and Galilean transformation. (orig.)

Analysis of a Segmented Annular Coplanar Capacitive Tilt Sensor with Increased Sensitivity.

Science.gov (United States)

Guo, Jiahao; Hu, Pengcheng; Tan, Jiubin

2016-01-21

An investigation of a segmented annular coplanar capacitor is presented. We focus on its theoretical model, and a mathematical expression of the capacitance value is derived by solving a Laplace equation with Hankel transform. The finite element method is employed to verify the analytical result. Different control parameters are discussed, and each contribution to the capacitance value of the capacitor is obtained. On this basis, we analyze and optimize the structure parameters of a segmented coplanar capacitive tilt sensor, and three models with different positions of the electrode gap are fabricated and tested. The experimental result shows that the model (whose electrode-gap position is 10 mm from the electrode center) realizes a high sensitivity: 0.129 pF/° with a non-linearity of design.

Frictionless contact of a rigid punch indenting a transversely isotropic elastic layer

Directory of Open Access Journals (Sweden)

Rajesh Patra

2016-03-01

Full Text Available This article is concerned with the study of frictionless contact between a rigid punch and a transversely isotropic elastic layer. The rigid punch is assumed to be axially symmetric and is being pressed towards the layer by an applied concentrated load. The layer is resting on a rigid base and is assumed to be ufficiently thick in comparison with the amount of indentation by the rigid punch. The relationship between the applied load $P$ and the contact area is obtained by solving the mathematically formulated problem through use of Hankel transform of different order. Effect of indentation on the distribution of normal stress at the surface as well as the relationship between the applied load and the area of contact have been shown graphically.

TRANSFORMATION

Energy Technology Data Exchange (ETDEWEB)

LACKS,S.A.

2003-10-09

Transformation, which alters the genetic makeup of an individual, is a concept that intrigues the human imagination. In Streptococcus pneumoniae such transformation was first demonstrated. Perhaps our fascination with genetics derived from our ancestors observing their own progeny, with its retention and assortment of parental traits, but such interest must have been accelerated after the dawn of agriculture. It was in pea plants that Gregor Mendel in the late 1800s examined inherited traits and found them to be determined by physical elements, or genes, passed from parents to progeny. In our day, the material basis of these genetic determinants was revealed to be DNA by the lowly bacteria, in particular, the pneumococcus. For this species, transformation by free DNA is a sexual process that enables cells to sport new combinations of genes and traits. Genetic transformation of the type found in S. pneumoniae occurs naturally in many species of bacteria (70), but, initially only a few other transformable species were found, namely, Haemophilus influenzae, Neisseria meningitides, Neisseria gonorrheae, and Bacillus subtilis (96). Natural transformation, which requires a set of genes evolved for the purpose, contrasts with artificial transformation, which is accomplished by shocking cells either electrically, as in electroporation, or by ionic and temperature shifts. Although such artificial treatments can introduce very small amounts of DNA into virtually any type of cell, the amounts introduced by natural transformation are a million-fold greater, and S. pneumoniae can take up as much as 10% of its cellular DNA content (40).

Classification of displacive transformations: what is a martensitic transformation?

International Nuclear Information System (INIS)

Christian, J.W.; Olson, G.B.; Cohen, M.

1995-01-01

The displacive transformation classification proposed at ICOMAT 79 is reviewed in light of recent progress in mechanistic understanding. Issues considered include distinctions between shuffle transformation vs. self-accommodating shear, dilatation vs. shear-dominant transformation, and nucleated vs. continuous transformation. (orig.)

Distinctive transforming genes in x-ray-transformed mammalian cells

International Nuclear Information System (INIS)

Borek, C.; Ong, A.; Mason, H.

1987-01-01

DNAs from hamster embryo cells and mouse C3H/10T1/2 cells transformed in vitro by x-irradiation into malignant cells transmit the radiation transformation phenotype by producing transformed colonies (transfectants) in two mouse recipient lines, the NIH 3T3 and C3H/101/2 cells, and in a rat cell line, the Rat-2 cells. DNAs from unirradiated cells or irradiated and visibly untransformed cells do not produce transformed colonies. The transfectant grow in agar and form tumors in nude mice. Treatment of the DNAs with restriction endonucleases prior to transfection indicates that the same transforming gene (oncogene) is present in each of the transformed mouse cells and is the same in each of the transformed hamster cells. Southern blot analysis of 3T3 or Rat-2 transfectants carrying oncogenes from radiation-transformed C3H/10T1/2 or hamster cells indicates that the oncogenes responsible for the transformation of 3T3 cells are not the Ki-ras, Ha-ras, N-ras genes, nor are they neu, trk, raf, abl, or fms. The work demonstrates that DNAs from mammalian cells transformed into malignancy by direct exposure in vitro to radiation contain genetic sequences with detectable transforming activity in three recipient cell lines. The results provide evidence that DNA is the target of radiation carcinogenesis induced at a cellular level in vitro. The experiments indicate that malignant radiogenic transformation in vitro of hamster embryo and mouse C3H/10T1/2 cells involves the activation of unique non-ras transforming genes, which heretofore have not been described

Transient thermal stresses in a transversely isotropic finite hollow circular cylinder due to arbitrary surface heat generations

International Nuclear Information System (INIS)

Sugano, Yoshihiro; Nakanishi, Takanori.

1980-01-01

The materials macroscopically regarded as anisotropic materials such as fiber-reinforced composite materials have become to be used for the structural elements at elevated temperature, and the studies on the problem of thermal stress in anisotropic bodies are carried out actively. The unsteady thermal stress in anisotropic finite circular cylinders has not been analyzed so far. In this study, the problem of unsteady thermal stress in an anisotropic finite circular cylinder having arbitrary surface heat generation in axial direction on the internal and external surfaces, and emitting heat from both ends and the internal and external surfaces, was analyzed. For the analysis of temperature distribution, generalized finite Fourier transformation and finite Hankel transformation were used, and thermal stress and thermal displacement were analyzed by the use of the stress function of Singh. By adopting the function used for the transformation nucleus in generalized finite Fourier transformation as the stress function, the analysis was made without separating symmetric and opposite symmetric problems. Numerical calculation was carried out on the basis of the analytical results, and the effects of the anisotropy in thermal conductivity, Young's modulus and linear expansion on unsteady temperature distribution, thermal stress and thermal displacement were quantitatively examined. (Kako, I.)

Adaption of optical Fresnel transform to optical Wigner transform

International Nuclear Information System (INIS)

Lv Cuihong; Fan Hongyi

2010-01-01

Enlightened by the algorithmic isomorphism between the rotation of the Wigner distribution function (WDF) and the αth fractional Fourier transform, we show that the optical Fresnel transform performed on the input through an ABCD system makes the output naturally adapting to the associated Wigner transform, i.e. there exists algorithmic isomorphism between ABCD transformation of the WDF and the optical Fresnel transform. We prove this adaption in the context of operator language. Both the single-mode and the two-mode Fresnel operators as the image of classical Fresnel transform are introduced in our discussions, while the two-mode Wigner operator in the entangled state representation is introduced for fitting the two-mode Fresnel operator.

Transient electro-magneto-hydrodynamic two-phase blood flow and thermal transport through a capillary vessel.

Science.gov (United States)

Mirza, I A; Abdulhameed, M; Vieru, D; Shafie, S

2016-12-01

Therapies with magnetic/electromagnetic field are employed to relieve pains or, to accelerate flow of blood-particles, particularly during the surgery. In this paper, a theoretical study of the blood flow along with particles suspension through capillary was made by the electro-magneto-hydrodynamic approach. Analytical solutions to the non-dimensional blood velocity and non-dimensional particles velocity are obtained by means of the Laplace transform with respect to the time variable and the finite Hankel transform with respect to the radial coordinate. The study of thermally transfer characteristics is based on the energy equation for two-phase thermal transport of blood and particles suspension with viscous dissipation, the volumetric heat generation due to Joule heating effect and electromagnetic couple effect. The solution of the nonlinear heat transfer problem is derived by using the velocity field and the integral transform method. The influence of dimensionless system parameters like the electrokinetic width, the Hartman number, Prandtl number, the coefficient of heat generation due to Joule heating and Eckert number on the velocity and temperature fields was studied using the Mathcad software. Results are presented by graphical illustrations. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Discrete fourier transform (DFT) analysis for applications using iterative transform methods

Science.gov (United States)

Dean, Bruce H. (Inventor)

2012-01-01

According to various embodiments, a method is provided for determining aberration data for an optical system. The method comprises collecting a data signal, and generating a pre-transformation algorithm. The data is pre-transformed by multiplying the data with the pre-transformation algorithm. A discrete Fourier transform of the pre-transformed data is performed in an iterative loop. The method further comprises back-transforming the data to generate aberration data.

Transformative Learning

Science.gov (United States)

Wang, Victor C. X.; Cranton, Patricia

2011-01-01

The theory of transformative learning has been explored by different theorists and scholars. However, few scholars have made an attempt to make a comparison between transformative learning and Confucianism or between transformative learning and andragogy. The authors of this article address these comparisons to develop new and different insights…

Resolving spectral information from time domain induced polarization data through 2-D inversion

DEFF Research Database (Denmark)

Fiandaca, Gianluca; Ramm, James; Binley, A.

2013-01-01

these limitations of conventional approaches, a new 2-D inversion algorithm has been developed using the full voltage decay of the IP response, together with an accurate description of the transmitter waveform and receiver transfer function. This allows reconstruction of the spectral information contained in the TD...... sampling necessary in the fast Hankel transform. These features, together with parallel computation, ensure inversion times comparable with those of direct current algorithms. The algorithm has been developed in a laterally constrained inversion scheme, and handles both smooth and layered inversions......; the latter being helpful in sedimentary environments, where quasi-layered models often represent the actual geology more accurately than smooth minimum-structure models. In the layered inversion approach, a general method to derive the thickness derivative from the complex conductivity Jacobian is also...

Negotiated Grammar Transformation

NARCIS (Netherlands)

V. Zaytsev (Vadim)

2012-01-01

htmlabstractIn this paper, we study controlled adaptability of metamodel transformations. We consider one of the most rigid metamodel transformation formalisms — automated grammar transformation with operator suites, where a transformation script is built in such a way that it is essentially meant

Diffusionless phase transformations

International Nuclear Information System (INIS)

Vejman, K.M.

1987-01-01

Diffusionless phase transformations in metals and alloys in the process of which atomic displacements occur at the distances lower than interatomic ones and relative correspondence of neighbour atoms is preserved, are considered. Special attention is paid to the mechanism of martensitic transformations. Phenomenologic crystallographical theory of martensitic transformations are presented. Two types of martensitic transformations different from the energy viewpoint are pointed out - thermoelastic and non-thermoelastic ones - which are characterized by transformation hysteresis and ways of martensite - initial phase reverse transformation realization. Mechanical effect in the martensitic transformations have been analyzed. The problem of diffusionless formation of ω-phases and the effect of impurities and vacancies on the process are briefly discussed. The role of charge density waves in phase transformations of the second type (transition of initial phase into noncommensurate one) and of the first type (transition of noncommensurate phase into commensurate one) is considered

Power transformers - Part 11: Dry-type transformers

CERN Document Server

International Electrotechnical Commission. Geneva

2004-01-01

Applies to dry-type power transformers (including auto-transformers) having values of highest voltage for equipment up to and including 36 kV and at least one winding operating at greater than 1,1 kV. Applies to all construction technologies.

Visualizing Transformation

DEFF Research Database (Denmark)

Pedersen, Pia

2012-01-01

Transformation, defined as the step of extracting, arranging and simplifying data into visual form (M. Neurath, 1974), was developed in connection with ISOTYPE (International System Of TYpographic Picture Education) and might well be the most important legacy of Isotype to the field of graphic...... design. Recently transformation has attracted renewed interest because of the book The Transformer written by Robin Kinross and Marie Neurath. My on-going research project, summarized in this paper, identifies and depicts the essential principles of data visualization underlying the process...... of transformation with reference to Marie Neurath’s sketches on the Bilston Project. The material has been collected at the Otto and Marie Neurath Collection housed at the University of Reading, UK. By using data visualization as a research method to look directly into the process of transformation, the project...

Generalized Staeckel transform and reciprocal transformations for finite-dimensional integrable systems

Energy Technology Data Exchange (ETDEWEB)

Sergyeyev, Artur [Mathematical Institute, Silesian University in Opava, Na RybnIcku 1, 746 01 Opava (Czech Republic); Blaszak, Maciej [Institute of Physics, A Mickiewicz University, Umultowska 85, 61-614 Poznan (Poland)], E-mail: Artur.Sergyeyev@math.slu.cz, E-mail: blaszakm@amu.edu.pl

2008-03-14

We present a multiparameter generalization of the Staeckel transform (the latter is also known as the coupling-constant metamorphosis) and show that under certain conditions this generalized Staeckel transform preserves Liouville integrability, noncommutative integrability and superintegrability. The corresponding transformation for the equations of motion proves to be nothing but a reciprocal transformation of a special form, and we investigate the properties of this reciprocal transformation. Finally, we show that the Hamiltonians of the systems possessing separation curves of apparently very different form can be related through a suitably chosen generalized Staeckel transform.

Performance of nonsynchronous noncommensurate impedance transformers in comparison to tapered line transformers

DEFF Research Database (Denmark)

Kim, Kseniya; Zhurbenko, Vitaliy; Johansen, Tom Keinicke

2012-01-01

to a traditional tapered line impedance transformer. The increase in bandwidth of nonsynchronous noncommensurate impedance transformers typically leads to shortening the transformer length, which makes the transformer attractive for applications, where a wide operating band and high transformation ratios...

Electrostatic Analysis of Annular Holes Penetrated by Shorted-Cable

Energy Technology Data Exchange (ETDEWEB)

Choo, Jae Yul; Kim, Hyung Tae; Park, Hyun Shin; Cho, Young Sik [KINS, Daejeon (Korea, Republic of)

2016-05-15

The cabinet has an important role to protect the contained cables and digital modules for the safety function from the external electromagnetic (EM) source. Thus the immunity of an open cabinet against electromagnetic interference (EMI) numerically has been investigated using mode-matching method in. Another path for the external EM source to impinge on inner cables and digital modules is the bottom hole of the cabinet that is penetrated by various cables. Especially the EMI can detrimentally influence on the digital modules through annular space caused by sealing the bottom hole of the cabinet incompletely. Thus it is recently required that the electromagnetic interpretation in the annular hole is performed to remedy electromagnetic problems. Based on the mode-matching method, we solved the electrostatic boundary-value problem for holes penetrating shorted-cable at the bottom of a digital I and C cabinet. The Weber transform and the Hankel transform were applied to formulate the electrostatic potential. The capacitance and potential distribution generated near the penetrating shorted-cable were computed and compared with the result from the previous study.

On the windowed Fourier transform as an interpolation of the Gabor transform

NARCIS (Netherlands)

Bastiaans, M.J.; Prochßzka, A.; Uhlør, J.; Sovka, P.

1997-01-01

The windowed Fourier transform and its sampled version - the Gabor transform - are introduced. With the help of Gabor's signal expansion, an interpolation function is derived with which the windowed Fourier transform can be constructed from the Gabor transform. Using the Zak transform, it is shown

Natural plasmid transformation in a high-frequency-of transformation marine Vibrio strain

International Nuclear Information System (INIS)

Frischer, M.E.; Thurmond, J.M.; Paul, J.H.

1990-01-01

The estuarine bacterium Vibrio strain DI-9 has been shown to be naturally transformable with both broad host range plasmid multimers and homologous chromosomal DNA at average frequencies of 3.5 x 10 -9 and 3.4 x 10 -7 transformants per recipient, respectively. Growth of plasmid transformants in nonselective medium resulted in cured strains that transformed 6 to 42,857 times more frequently than the parental strain, depending on the type of transforming DNA. These high-frequency-of-transformation (HfT) strains were transformed at frequencies ranging from 1.1 x 10 -8 to 1.3 x 10 -4 transformants per recipient with plasmid DNA and at an average frequency of 8.3 x 10 -5 transformants per recipient with homologous chromosomal DNA. The highest transformation frequencies were observed by using multimers of an R1162 derivative carrying the transposon Tn5 (pQSR50). Probing of total DNA preparations from one of the cured strains demonstrated that no plasmid DNA remained in the cured strains which may have provided homology to the transforming DNA. All transformants and cured strains could be differentiated from the parental strains by colony morphology. DNA binding studies indicated that late-log-phase HfT strains bound [ 3 H]bacteriophage lambda DNA 2.1 times more rapidly than the parental strain. These results suggest that the original plasmid transformation event of strain DI-9 was the result of uptake and expression of plasmid DNA by a competent mutant (HfT strain). Additionally, it was found that a strain of Vibrio parahaemolyticus, USFS 3420, could be naturally transformed with plasmid DNA. Natural plasmid transformation by high-transforming mutants may be a means of plasmid acquisition by natural aquatic bacterial populations

Approximating the Analytic Fourier Transform with the Discrete Fourier Transform

OpenAIRE

Axelrod, Jeremy

2015-01-01

The Fourier transform is approximated over a finite domain using a Riemann sum. This Riemann sum is then expressed in terms of the discrete Fourier transform, which allows the sum to be computed with a fast Fourier transform algorithm more rapidly than via a direct matrix multiplication. Advantages and limitations of using this method to approximate the Fourier transform are discussed, and prototypical MATLAB codes implementing the method are presented.

TRANSFORMER

Science.gov (United States)

Baker, W.R.

1959-08-25

Transformers of a type adapted for use with extreme high power vacuum tubes where current requirements may be of the order of 2,000 to 200,000 amperes are described. The transformer casing has the form of a re-entrant section being extended through an opening in one end of the cylinder to form a coaxial terminal arrangement. A toroidal multi-turn primary winding is disposed within the casing in coaxial relationship therein. In a second embodiment, means are provided for forming the casing as a multi-turn secondary. The transformer is characterized by minimized resistance heating, minimized external magnetic flux, and an economical construction.

On Hurwitz transformations

International Nuclear Information System (INIS)

Kibler, M.; Hage Hassan, M.

1991-04-01

A bibliography on the Hurwitz transformations is given. We deal here, with some details, with two particular Hurwitz transformations, viz, the R 4 → R 3 Kustaanheimo-Stiefel transformation and its R 8 → R 5 compact extension. These transformations are derived in the context of Fock-Bargmann-Schwinger calculus with special emphasis on angular momentum theory

Transformation

DEFF Research Database (Denmark)

Bock, Lars Nicolai

2011-01-01

Artiklen diskuterer ordet "transformation" med udgangspunkt i dels hvorledes ordet bruges i arkitektfaglig terminologi og dels med fokus på ordets potentielle indhold og egnethed i samme teminologi.......Artiklen diskuterer ordet "transformation" med udgangspunkt i dels hvorledes ordet bruges i arkitektfaglig terminologi og dels med fokus på ordets potentielle indhold og egnethed i samme teminologi....

The J and P transformer book a practical technology of the power transformer

CERN Document Server

Franklin, Arthur Charles

1983-01-01

The J&P Transformer Book, 11th Edition deals with the design, installation, and maintenance of transformers. The book contains technical information, tables, calculations, diagrams, and illustrations based on information supplied by transformer manufacturers and related industries. It reviews fundamental transformer principles, the magnetic circuit, the characteristics of, and general types of transformers. The text contains tables showing the information that should be given to the transformer manufacturer to be used as a basis in preparing quotations. Transformer designs include three import

Transforming the Way We Teach Function Transformations

Science.gov (United States)

Faulkenberry, Eileen Durand; Faulkenberry, Thomas J.

2010-01-01

In this article, the authors discuss "function," a well-defined rule that relates inputs to outputs. They have found that by using the input-output definition of "function," they can examine transformations of functions simply by looking at changes to input or output and the respective changes to the graph. Applying transformations to the input…

The continous Legendre transform, its inverse transform, and applications

Directory of Open Access Journals (Sweden)

P. L. Butzer

1980-01-01

Full Text Available This paper is concerned with the continuous Legendre transform, derived from the classical discrete Legendre transform by replacing the Legendre polynomial Pk(x by the function Pλ(x with λ real. Another approach to T.M. MacRobert's inversion formula is found; for this purpose an inverse Legendre transform, mapping L1(ℝ+ into L2(−1,1, is defined. Its inversion in turn is naturally achieved by the continuous Legendre transform. One application is devoted to the Shannon sampling theorem in the Legendre frame together with a new type of error estimate. The other deals with a new representation of Legendre functions giving information about their behaviour near the point x=−1.

Hadamard Transforms

CERN Document Server

Agaian, Sos; Egiazarian, Karen; Astola, Jaakko

2011-01-01

The Hadamard matrix and Hadamard transform are fundamental problem-solving tools in a wide spectrum of scientific disciplines and technologies, such as communication systems, signal and image processing (signal representation, coding, filtering, recognition, and watermarking), digital logic (Boolean function analysis and synthesis), and fault-tolerant system design. Hadamard Transforms intends to bring together different topics concerning current developments in Hadamard matrices, transforms, and their applications. Each chapter begins with the basics of the theory, progresses to more advanced

Transparent Model Transformation: Turning Your Favourite Model Editor into a Transformation Tool

DEFF Research Database (Denmark)

Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

2015-01-01

Current model transformation languages are supported by dedicated editors, often closely coupled to a single execution engine. We introduce Transparent Model Transformation, a paradigm enabling modelers to specify transformations using a familiar tool: their model editor. We also present VMTL, th...... model transformation tool sharing the model editor’s benefits, transparently....

Heuristic geometric ''eigenvalue universality'' in a one-dimensional neutron transport problem with anisotropic scattering

International Nuclear Information System (INIS)

Goncalves, G.A.; Vilhena, M.T. de; Bodmann, B.E.J.

2010-01-01

In the present work we propose a heuristic construction of a transport equation for neutrons with anisotropic scattering considering only the radial cylinder dimension. The eigenvalues of the solutions of the equation correspond to the positive values for the one dimensional case. The central idea of the procedure is the application of the S N method for the discretisation of the angular variable followed by the application of the zero order Hankel transformation. The basis the construction of the scattering terms in form of an integro-differential equation for stationary transport resides in the hypothesis that the eigenvalues that compose the elementary solutions are independent of geometry for a homogeneous medium. We compare the solutions for the cartesian one dimensional problem for an infinite cylinder with azimuthal symmetry and linear anisotropic scattering for two cases. (orig.)

General form of the Euler-Poisson-Darboux equation and application of the transmutation method

Directory of Open Access Journals (Sweden)

Elina L. Shishkina

2017-07-01

Full Text Available In this article, we find solution representations in the compact integral form to the Cauchy problem for a general form of the Euler-Poisson-Darboux equation with Bessel operators via generalized translation and spherical mean operators for all values of the parameter k, including also not studying before exceptional odd negative values. We use a Hankel transform method to prove results in a unified way. Under additional conditions we prove that a distributional solution is a classical one too. A transmutation property for connected generalized spherical mean is proved and importance of applying transmutation methods for differential equations with Bessel operators is emphasized. The paper also contains a short historical introduction on differential equations with Bessel operators and a rather detailed reference list of monographs and papers on mathematical theory and applications of this class of differential equations.

Multilayer on-chip stacked Fresnel zone plates: Hard x-ray fabrication and soft x-ray simulations

Energy Technology Data Exchange (ETDEWEB)

Li, Kenan; Wojcik, Michael J.; Ocola, Leonidas E.; Divan, Ralu; Jacobsen, Chris

2015-11-01

Fresnel zone plates are widely used as x-ray nanofocusing optics. To achieve high spatial resolution combined with good focusing efficiency, high aspect ratio nanolithography is required, and one way to achieve that is through multiple e-beam lithography writing steps to achieve on-chip stacking. A two-step writing process producing 50 nm finest zone width at a zone thickness of 1.14 µm for possible hard x-ray applications is shown here. The authors also consider in simulations the case of soft x-ray focusing where the zone thickness might exceed the depth of focus. In this case, the authors compare on-chip stacking with, and without, adjustment of zone positions and show that the offset zones lead to improved focusing efficiency. The simulations were carried out using a multislice propagation method employing Hankel transforms.

Nonsynchronous Noncommensurate Impedance Transformers

DEFF Research Database (Denmark)

Zhurbenko, Vitaliy; Kim, K

2012-01-01

Nonsynchronous noncommensurate impedance transformers consist of a combination of two types of transmission lines: transmission lines with a characteristic impedance equal to the impedance of the source, and transmission lines with a characteristic impedance equal to the load. The practical...... advantage of such transformers is that they can be constructed using sections of transmission lines with a limited variety of characteristic impedances. These transformers also provide comparatively compact size in applications where a wide transformation ratio is required. This paper presents the data...... matrix approach and experimentally verified by synthesizing a 12-section nonsynchronous noncommensurate impedance transformer. The measured characteristics of the transformer are compared to the characteristics of a conventional tapered line transformer....

Transformative environmental governance

Science.gov (United States)

Chaffin, Brian C.; Garmestani, Ahjond S.; Gunderson, Lance H.; Harm Benson, Melinda; Angeler, David G.; Arnold, Craig Anthony (Tony); Cosens, Barbara; Kundis Craig, Robin; Ruhl, J.B.; Allen, Craig R.

2016-01-01

Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to alternative, more desirable, or more functional regimes by altering the structures and processes that define the system. Transformative governance is rooted in ecological theories to explain cross-scale dynamics in complex systems, as well as social theories of change, innovation, and technological transformation. Similar to adaptive governance, transformative governance involves a broad set of governance components, but requires additional capacity to foster new social-ecological regimes including increased risk tolerance, significant systemic investment, and restructured economies and power relations. Transformative governance has the potential to actively respond to regime shifts triggered by climate change, and thus future research should focus on identifying system drivers and leading indicators associated with social-ecological thresholds.

Heat transfer comparison of nanofluid filled transformer and traditional oil-immersed transformer

Science.gov (United States)

Zhang, Yunpeng; Ho, Siu-lau; Fu, Weinong

2018-05-01

Dispersing nanoparticles with high thermal conductivity into transformer oil is an innovative approach to improve the thermal performance of traditional oil-immersed transformers. This mixture, also known as nanofluid, has shown the potential in practical application through experimental measurements. This paper presents the comparisons of nanofluid filled transformer and traditional oil-immersed transformer in terms of their computational fluid dynamics (CFD) solutions from the perspective of optimal design. Thermal performance of transformers with the same parameters except coolants is compared. A further comparison on heat transfer then is made after minimizing the oil volume and maximum temperature-rise of these two transformers. Adaptive multi-objective optimization method is employed to tackle this optimization problem.

The convolution transform

CERN Document Server

Hirschman, Isidore Isaac

2005-01-01

In studies of general operators of the same nature, general convolution transforms are immediately encountered as the objects of inversion. The relation between differential operators and integral transforms is the basic theme of this work, which is geared toward upper-level undergraduates and graduate students. It may be read easily by anyone with a working knowledge of real and complex variable theory. Topics include the finite and non-finite kernels, variation diminishing transforms, asymptotic behavior of kernels, real inversion theory, representation theory, the Weierstrass transform, and

The transformativity approach

DEFF Research Database (Denmark)

Holm, Isak Winkel; Lauta, Kristian Cedervall

2017-01-01

During the last five to ten years, a considerable body of research has begun to explore how disasters, real and imagined, trigger social transformations. Even if the contributions to this this research stems from a multitude of academic disciplines, we argue in the article, they constitute...... an identifiable and promising approach for future disaster research. We suggest naming it the transformativity approach. Whereas the vulnerability approach explores the social causation of disasters, the transformativity approach reverses the direction of the gaze and investigates the social transformation...... brought about by disasters. Put simply, the concept of vulnerability is about the upstream causes of disaster and the concept of transformativity about the downstream effects. By discussing three recent contributions (by the historian Greg Bankoff, the legal sociologist Michelle Dauber...

Defense Business Transformation

Science.gov (United States)

2009-12-01

Defense Business Transformation by Jacques S. Gansler and William Lucyshyn The Center for Technology and National...REPORT TYPE 3. DATES COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE Defense Business Transformation 5a. CONTRACT NUMBER 5b. GRANT NUMBER...vii Part One: DoD Business Transformation

Generalized Fourier transforms classes

DEFF Research Database (Denmark)

Berntsen, Svend; Møller, Steen

2002-01-01

The Fourier class of integral transforms with kernels $B(\\omega r)$ has by definition inverse transforms with kernel $B(-\\omega r)$. The space of such transforms is explicitly constructed. A slightly more general class of generalized Fourier transforms are introduced. From the general theory...

Three dimensional canonical transformations

International Nuclear Information System (INIS)

Tegmen, A.

2010-01-01

A generic construction of canonical transformations is given in three-dimensional phase spaces on which Nambu bracket is imposed. First, the canonical transformations are defined as based on cannonade transformations. Second, it is shown that determination of the generating functions and the transformation itself for given generating function is possible by solving correspondent Pfaffian differential equations. Generating functions of type are introduced and all of them are listed. Infinitesimal canonical transformations are also discussed as the complementary subject. Finally, it is shown that decomposition of canonical transformations is also possible in three-dimensional phase spaces as in the usual two-dimensional ones.

On the ratio probability of the smallest eigenvalues in the Laguerre unitary ensemble

Science.gov (United States)

Atkin, Max R.; Charlier, Christophe; Zohren, Stefan

2018-04-01

We study the probability distribution of the ratio between the second smallest and smallest eigenvalue in the Laguerre unitary ensemble. The probability that this ratio is greater than r  >  1 is expressed in terms of an Hankel determinant with a perturbed Laguerre weight. The limiting probability distribution for the ratio as is found as an integral over containing two functions q 1(x) and q 2(x). These functions satisfy a system of two coupled Painlevé V equations, which are derived from a Lax pair of a Riemann-Hilbert problem. We compute asymptotic behaviours of these functions as and , as well as large n asymptotics for the associated Hankel determinants in several regimes of r and x.

A block Hankel generalized confluent Vandermonde matrix

NARCIS (Netherlands)

Klein, A.; Spreij, P.

2014-01-01

Vandermonde matrices are well known. They have a number of interesting properties and play a role in (Lagrange) interpolation problems, partial fraction expansions, and finding solutions to linear ordinary differential equations, to mention just a few applications. Usually, one takes these matrices

Improving Your Data Transformations: Applying the Box-Cox Transformation

Directory of Open Access Journals (Sweden)

Jason W. Osborne

2010-10-01

Full Text Available Many of us in the social sciences deal with data that do not conform to assumptions of normality and/or homoscedasticity/homogeneity of variance. Some research has shown that parametric tests (e.g., multiple regression, ANOVA can be robust to modest violations of these assumptions. Yet the reality is that almost all analyses (even nonparametric tests benefit from improved the normality of variables, particularly where substantial non-normality is present. While many are familiar with select traditional transformations (e.g., square root, log, inverse for improving normality, the Box-Cox transformation (Box & Cox, 1964 represents a family of power transformations that incorporates and extends the traditional options to help researchers easily find the optimal normalizing transformation for each variable. As such, Box-Cox represents a potential best practice where normalizing data or equalizing variance is desired. This paper briefly presents an overview of traditional normalizing transformations and how Box-Cox incorporates, extends, and improves on these traditional approaches to normalizing data. Examples of applications are presented, and details of how to automate and use this technique in SPSS and SAS are included.

Transformation of UML models to CSP : a case study for graph transformation tools

NARCIS (Netherlands)

Varró, D.; Asztalos, M.; Bisztray, D.; Boronat, A.; Dang, D.; Geiß, R.; Greenyer, J.; Van Gorp, P.M.E.; Kniemeyer, O.; Narayanan, A.; Rencis, E.; Weinell, E.; Schürr, A.; Nagl, M.; Zündorf, A.

2008-01-01

Graph transformation provides an intuitive mechanism for capturing model transformations. In the current paper, we investigate and compare various graph transformation tools using a compact practical model transformation case study carried out as part of the AGTIVE 2007 Tool Contest [22]. The aim of

Image encryption with chaotic map and Arnold transform in the gyrator transform domains

Science.gov (United States)

Sang, Jun; Luo, Hongling; Zhao, Jun; Alam, Mohammad S.; Cai, Bin

2017-05-01

An image encryption method combing chaotic map and Arnold transform in the gyrator transform domains was proposed. Firstly, the original secret image is XOR-ed with a random binary sequence generated by a logistic map. Then, the gyrator transform is performed. Finally, the amplitude and phase of the gyrator transform are permutated by Arnold transform. The decryption procedure is the inverse operation of encryption. The secret keys used in the proposed method include the control parameter and the initial value of the logistic map, the rotation angle of the gyrator transform, and the transform number of the Arnold transform. Therefore, the key space is large, while the key data volume is small. The numerical simulation was conducted to demonstrate the effectiveness of the proposed method and the security analysis was performed in terms of the histogram of the encrypted image, the sensitiveness to the secret keys, decryption upon ciphertext loss, and resistance to the chosen-plaintext attack.

Relation between catalyst-assisted transformation and multiple-copy transformation for bipartite pure states

International Nuclear Information System (INIS)

Feng Yuan; Duan Runyao; Ying Mingsheng

2006-01-01

We show that in some cases, catalyst-assisted entanglement transformation cannot be implemented by multiple-copy transformation for pure states. This fact, together with the result we obtained in R. Y. Duan, Y. Feng, X. Li, and M. S. Ying, Phys. Rev. A 71, 042319 (2005), namely that the latter can be completely implemented by the former, indicates that catalyst-assisted transformation is strictly more powerful than multiple-copy transformation. For the purely probabilistic setting we find, however, these two kinds of transformations are geometrically equivalent in the sense that the sets of pure states that can be converted into a given pure state with maximal probabilities not less than a given value have the same closure, regardless of whether catalyst-assisted transformation or multiple-copy transformation is used

Disc piezoelectric ceramic transformers.

Science.gov (United States)

Erhart, Jirií; Půlpán, Petr; Doleček, Roman; Psota, Pavel; Lédl, Vít

2013-08-01

In this contribution, we present our study on disc-shaped and homogeneously poled piezoelectric ceramic transformers working in planar-extensional vibration modes. Transformers are designed with electrodes divided into wedge, axisymmetrical ring-dot, moonie, smile, or yin-yang segments. Transformation ratio, efficiency, and input and output impedances were measured for low-power signals. Transformer efficiency and transformation ratio were measured as a function of frequency and impedance load in the secondary circuit. Optimum impedance for the maximum efficiency has been found. Maximum efficiency and no-load transformation ratio can reach almost 100% and 52 for the fundamental resonance of ring-dot transformers and 98% and 67 for the second resonance of 2-segment wedge transformers. Maximum efficiency was reached at optimum impedance, which is in the range from 500 Ω to 10 kΩ, depending on the electrode pattern and size. Fundamental vibration mode and its overtones were further studied using frequency-modulated digital holographic interferometry and by the finite element method. Complementary information has been obtained by the infrared camera visualization of surface temperature profiles at higher driving power.

RetroTransformDB: A Dataset of Generic Transforms for Retrosynthetic Analysis

Directory of Open Access Journals (Sweden)

Svetlana Avramova

2018-04-01

Full Text Available Presently, software tools for retrosynthetic analysis are widely used by organic, medicinal, and computational chemists. Rule-based systems extensively use collections of retro-reactions (transforms. While there are many public datasets with reactions in synthetic direction (usually non-generic reactions, there are no publicly-available databases with generic reactions in computer-readable format which can be used for the purposes of retrosynthetic analysis. Here we present RetroTransformDB—a dataset of transforms, compiled and coded in SMIRKS line notation by us. The collection is comprised of more than 100 records, with each one including the reaction name, SMIRKS linear notation, the functional group to be obtained, and the transform type classification. All SMIRKS transforms were tested syntactically, semantically, and from a chemical point of view in different software platforms. The overall dataset design and the retrosynthetic fitness were analyzed and curated by organic chemistry experts. The RetroTransformDB dataset may be used by open-source and commercial software packages, as well as chemoinformatics tools.

Study of allotropic transformations in plutonium; Etude des transformations allotropiques du plutonium

Energy Technology Data Exchange (ETDEWEB)

Spriet, B [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1966-06-01

The allotropic transformations in plutonium have been studied by different methods: metallography, dilatometry, thermal analysis, resistivity measurements, examination with a hot stage microscope. In order to study the importance of the purity, purification process such as zone-melting or electro-diffusion have been developed. The characteristics of the {alpha} {r_reversible} {beta} transformation can be explained in terms of the influence of internal stresses on the transition temperature and on the transformation kinetics. Some particular characteristics of {delta} {yields} {gamma}, {gamma} {yields} {alpha}, {delta} {r_reversible} {epsilon}, {beta} {r_reversible} {gamma} and {delta} {yields} {alpha} transformations are also given. (author) [French] Les transformations, allotropiques du plutonium ont ete etudiees a l'aide de differentes methodes: metallographie, dilatometrie, analyse thermique, mesure de resistivite, examen au microscope a platine chauffante. Pour preciser l'influence de la purete, des procedes de purification comme la fusion de zone ou l'electrodiffusion ont ete mis au point. Les caracteres de la transformation {alpha} {r_reversible} {beta} s'expliquent par le role des contraintes internes sur la temperature de transition et la cinetique de transformation. Quelques particularites des transformations {delta} {yields} {gamma}, {gamma} {yields} {alpha}, {delta} {r_reversible} {epsilon}, {beta} {r_reversible} {gamma} et {delta} {yields} {alpha} sont egalement presentees. (auteur)

TRANSFORMATIONAL LEADERSHIP – THE ART OF SUCCESSFULLY MANAGING TRANSFORMATIONAL ORGANIZATIONAL CHANGES

Directory of Open Access Journals (Sweden)

Ionel Scaunasu

2012-12-01

Full Text Available Companies today face new challenges waves, striving to remain competitive in a rapidly-changing market. Transformational leadership is a strategic key approach to successfully managing organizational transformational changes, the art of boat business leads by turbulence beginning of the XXI century. In fact, this is a new quality of leadership that so-called transactional management blew it in an attempt to end the cycle of conversion efficiency. In this sense, the success of transformational organizational change management involving key people in an organization (managers to develop appropriate skill sets and attributes that characterize the so-called transformational leaders.

Transformer design principles with applications to core-form power transformers

CERN Document Server

Del Vecchio, Robert M; Feeney, Mary-Ellen F

2001-01-01

Transformer Design Principles presents the theory of transformer operation and the methods and techniques of designing them. It emphasizes the physical principles and mathematical tools for simulating transformer behavior, including modern computer techniques. The scope of the book includes types of construction, circuit analysis, mechanical aspects of design, high voltage insulation requirements, and cooling design. The authors also address test procedures and reliability methods to assure successful design and discuss the economic analysis of designs. Summarizing material currently scattered

Fractional finite Fourier transform.

Science.gov (United States)

Khare, Kedar; George, Nicholas

2004-07-01

We show that a fractional version of the finite Fourier transform may be defined by using prolate spheroidal wave functions of order zero. The transform is linear and additive in its index and asymptotically goes over to Namias's definition of the fractional Fourier transform. As a special case of this definition, it is shown that the finite Fourier transform may be inverted by using information over a finite range of frequencies in Fourier space, the inversion being sensitive to noise. Numerical illustrations for both forward (fractional) and inverse finite transforms are provided.

Using the transformer oil-based nanofluid for cooling of power distribution transformer

OpenAIRE

Mushtaq Ismael Hasan

2017-01-01

Thermal behavior of electrical distribution transformer has been numerically studied with the effect of surrounding air temperature. 250 KVA distribution transformer is chosen as a study model and studied in temperature range cover the weather conditions of hot places. Transformer oil-based nanofluids were used as a cooling medium instead of pure transformer oil. Four types of solid particles (Cu, Al2O3, TiO2 and SiC) were used to compose nanofluids with volume fractions (1%, 3%, 5%, 7%, and ...

Quantized Bogoliubov transformations

International Nuclear Information System (INIS)

Geyer, H.B.

1984-01-01

The boson mapping of single fermion operators in a situation dominated by the pairing force gives rise to a transformation that can be considered a quantized version of the Bogoliubov transformation. This transformation can also be obtained as an exact special case of operators constructed from an approximate treatment of particle number projection, suggesting a method of obtaining the boson mapping in cases more complicated than that of pairing force domination

Transformation on Abandonment

DEFF Research Database (Denmark)

Krag, Mo Michelsen Stochholm

2016-01-01

This paper outlines a research project on the increasing quantity of abandoned houses in the depopulating rural villages, and it reports on how an attempt is made to establish a counter-practice of radical preservation based on a series of full-scale transformations of abandoned buildings. The aim...... of the transformations is to reveal and preserve material and immaterial values such as aspects of cultural heritage, local narratives, and building density. The responses of local people are used as a feedback mechanism and considered an important impact indicator. Eleven transformations of varying strategies have...... houses. Transformation prototypes are tested as present manifestations in rural villages as an alternative way to preserve buildings as well as memories....

Two-Dimensional Model for Reactive-Sorption Columns of Cylindrical Geometry: Analytical Solutions and Moment Analysis.

Science.gov (United States)

Khan, Farman U; Qamar, Shamsul

2017-05-01

A set of analytical solutions are presented for a model describing the transport of a solute in a fixed-bed reactor of cylindrical geometry subjected to the first (Dirichlet) and third (Danckwerts) type inlet boundary conditions. Linear sorption kinetic process and first-order decay are considered. Cylindrical geometry allows the use of large columns to investigate dispersion, adsorption/desorption and reaction kinetic mechanisms. The finite Hankel and Laplace transform techniques are adopted to solve the model equations. For further analysis, statistical temporal moments are derived from the Laplace-transformed solutions. The developed analytical solutions are compared with the numerical solutions of high-resolution finite volume scheme. Different case studies are presented and discussed for a series of numerical values corresponding to a wide range of mass transfer and reaction kinetics. A good agreement was observed in the analytical and numerical concentration profiles and moments. The developed solutions are efficient tools for analyzing numerical algorithms, sensitivity analysis and simultaneous determination of the longitudinal and transverse dispersion coefficients from a laboratory-scale radial column experiment. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Completeness and orthonormality of the Volkov states and the Volkov propagator in configuration space

Science.gov (United States)

Di Piazza, A.

2018-03-01

Volkov states and Volkov propagator are the basic analytical tools to investigate QED processes occurring in the presence of an intense plane-wave electromagnetic field. In the present paper we provide alternative and relatively simple proofs of the completeness and of the orthonormality at a fixed time of the Volkov states. Concerning the completeness, we exploit some known properties of the Green's function of the Dirac operator in a plane wave, whereas the orthonormality of the Volkov states is proved, relying only on a geometric argument based on the Gauss theorem in four dimensions. In relation with the completeness of the Volkov states, we also study some analytical properties of the Green's function of the Dirac operator in a plane wave, which we explicitly prove to coincide with the Volkov propagator in configuration space. In particular, a closed-form expression in terms of modified Bessel functions and Hankel functions is derived by means of the operator technique in a plane wave and different asymptotic forms are determined. Finally, the transformation properties of the Volkov propagator under general gauge transformations and a general gauge-invariant expression of the so-called dressed mass in configuration space are presented.

Entropy of Baker's Transformation

Institute of Scientific and Technical Information of China (English)

栾长福

2003-01-01

Four theorems about four different kinds of entropies for Baker's transformation are presented. The Kolmogorov entropy of Baker's transformation is sensitive to the initial flips by the time. The topological entropy of Baker's transformation is found to be log k. The conditions for the state of Baker's transformation to be forbidden are also derived. The relations among the Shanonn, Kolmogorov, topological and Boltzmann entropies are discussed in details.

Kinetics of first order phase transformation in metals and alloys. Isothermal evolution in martensite transformation

International Nuclear Information System (INIS)

Iwasaki, Hiroshi; Ohshima, Ken-ichi

2011-01-01

The 11th lecture about microstructures and fluctuation in solids reports on the martensitic phase transformation of alkali metals and alloys. The martensitic transformation is a diffusionless first order phase transformation. Martensitic transformations are classified into two with respect to kinetics, one is isothermal transformation and the other is athermal transformation. The former transformation depends upon both temperature and time, but the latter solely depends on temperature. The former does not have a definite transformation start temperature but occurs after some finite incubation time during isothermal holding. The isothermal martensitic transformation is changed to the athermal one under high magnetic field, and also the reverse transformation occurs under the application of hydrostatic pressure. The former phenomena were observed in Fe-Ni-Mn alloys, Fe-Ni-Cr alloys and also the reverse transformation in Fe-3.1at%Ni-0.5at%Mn alloys. The athermal transformation was observed in Li and Na metals at 73 and 36 K, respectively. A neutron diffraction study has been performed on single crystals of metallic Na. On cooling the virgin sample, the incubation time to transform from the bcc structure to the low-temperature structure (9R structure) is formed to be more than 2h at 38 K, 2 K higher than the transformation temperature of 36 K. The full width of half maximum of the Bragg reflection suddenly increased, due to some deformation introduced by the nucleation of the low-temperature structure. In relation to the deformation, strong extra-diffuse scattering (Huang scattering) was observed around the Bragg reflection in addition to thermal diffuse scattering. The kinetics of the martensitic transformation in In-Tl alloys has been studied by x-ray and neutron diffraction methods. A characteristic incubation time appeared at fixed temperature above Ms, the normal martensitic transformation start temperature. (author)

Transformers analysis, design, and measurement

CERN Document Server

Lopez-Fernandez, Xose M; Turowski, Janusz

2012-01-01

This book focuses on contemporary economic, design, diagnostics, and maintenance aspects of power, instrument, and high frequency transformers, which are critical to designers for a transformer stations. The text covers such topics as shell type and superconducting transformers as well as coreless PCB and planar transformers. It emphasizes challenges and strategies in transformer design and illustrates the importance of economics in transformers management by reviewing life cycle cost design and the use of decision methods to manage risk.

Conduction-coupled Tesla transformer.

Science.gov (United States)

Reed, J L

2015-03-01

A proof-of-principle Tesla transformer circuit is introduced. The new transformer exhibits the high voltage-high power output signal of shock-excited transformers. The circuit, with specification of proper circuit element values, is capable of obtaining extreme oscillatory voltages. The primary and secondary portions of the circuit communicate solely by conduction. The destructive arcing between the primary and secondary inductors in electromagnetically coupled transformers is ubiquitous. Flashover is eliminated in the new transformer as the high-voltage inductors do not interpenetrate and so do not possess an annular volume of electric field. The inductors are remote from one another. The high voltage secondary inductor is isolated in space, except for a base feed conductor, and obtains earth by its self-capacitance to the surroundings. Governing equations, for the ideal case of no damping, are developed from first principles. Experimental, theoretical, and circuit simulator data are presented for the new transformer. Commercial high-temperature superconductors are discussed as a means to eliminate the counter-intuitive damping due to small primary inductances in both the electromagnetic-coupled and new conduction-coupled transformers.

Integral transformations applied to image encryption

International Nuclear Information System (INIS)

Vilardy, Juan M.; Torres, Cesar O.; Perez, Ronal

2017-01-01

In this paper we consider the application of the integral transformations for image encryption through optical systems, a mathematical algorithm under Matlab platform using fractional Fourier transform (FrFT) and Random Phase Mask (RPM) for digital images encryption is implemented. The FrFT can be related to others integral transforms, such as: Fourier transform, Sine and Cosine transforms, Radial Hilbert transform, fractional Sine transform, fractional Cosine transform, fractional Hartley transform, fractional Wavelet transform and Gyrator transform, among other transforms. The encryption scheme is based on the use of the FrFT, the joint transform correlator and two RPMs, which provide security and robustness to the implemented security system. One of the RPMs used during encryption-decryption and the fractional order of the FrFT are the keys to improve security and make the system more resistant against security attacks. (paper)

Thin-Film Power Transformers

Science.gov (United States)

Katti, Romney R.

1995-01-01

Transformer core made of thin layers of insulating material interspersed with thin layers of ferromagnetic material. Flux-linking conductors made of thinner nonferromagnetic-conductor/insulator multilayers wrapped around core. Transformers have geometric features finer than those of transformers made in customary way by machining and mechanical pressing. In addition, some thin-film materials exhibit magnetic-flux-carrying capabilities superior to those of customary bulk transformer materials. Suitable for low-cost, high-yield mass production.

Transformation language integration based on profiles and higher order transformations

NARCIS (Netherlands)

Van Gorp, P.M.E.; Keller, A.; Janssens, D.; Gaševic, D.; Lämmel, R.; Van Wyk, Eric

2009-01-01

For about two decades, researchers have been constructing tools for applying graph transformations on large model transformation case studies. Instead of incrementally extending a common core, these competitive tool builders have repeatedly reconstructed mechanisms that were already supported by

Electrostatic shielding of transformers

Energy Technology Data Exchange (ETDEWEB)

De Leon, Francisco

2017-11-28

Toroidal transformers are currently used only in low-voltage applications. There is no published experience for toroidal transformer design at distribution-level voltages. Toroidal transformers are provided with electrostatic shielding to make possible high voltage applications and withstand the impulse test.

Logarithmic Transformations in Regression: Do You Transform Back Correctly?

Science.gov (United States)

Dambolena, Ismael G.; Eriksen, Steven E.; Kopcso, David P.

2009-01-01

The logarithmic transformation is often used in regression analysis for a variety of purposes such as the linearization of a nonlinear relationship between two or more variables. We have noticed that when this transformation is applied to the response variable, the computation of the point estimate of the conditional mean of the original response…

A new perspective on relativistic transformation: formulation of the differential Lorentz transformation based on first principles

International Nuclear Information System (INIS)

Huang, Young-Sea

2010-01-01

The differential Lorentz transformation is formulated solely from the principle of relativity and the invariance of the speed of light. The differential Lorentz transformation transforms physical quantities, instead of space-time coordinates, to keep laws of nature form-invariant among inertial frames. The new relativistic transformation fulfills the principle of relativity, whereas the usual Lorentz transformation of space-time coordinates does not. Furthermore, the new relativistic transformation is compatible with quantum mechanics. The formulation herein provides theoretical foundations for the differential Lorentz transformation as the fundamental relativistic transformation.

Radial flow towards well in leaky unconfined aquifer

Science.gov (United States)

Mishra, P. K.; Kuhlman, K. L.

2012-12-01

An analytical solution is developed for three-dimensional flow towards a partially penetrating large- diameter well in an unconfined aquifer bounded below by a leaky aquitard of finite or semi-infinite extent. The analytical solution is derived using Laplace and Hankel transforms, then inverted numerically. Existing solutions for flow in leaky unconfined aquifers neglect the unsaturated zone following an assumption of instantaneous drainage due to Neuman. We extend the theory of leakage in unconfined aquifers by (1) including water flow and storage in the unsaturated zone above the water table, and (2) allowing the finite-diameter pumping well to partially penetrate the aquifer. The investigation of model-predicted results shows that aquitard leakage leads to significant departure from the unconfined solution without leakage. The investigation of dimensionless time-drawdown relationships shows that the aquitard drawdown also depends on unsaturated zone properties and the pumping-well wellbore storage effects.

Saturated-unsaturated flow in a compressible leaky-unconfined aquifer

Science.gov (United States)

Mishra, Phoolendra K.; Vesselinov, Velimir V.; Kuhlman, Kristopher L.

2012-06-01

An analytical solution is developed for three-dimensional flow towards a partially penetrating large-diameter well in an unconfined aquifer bounded below by a leaky aquitard of finite or semi-infinite extent. The analytical solution is derived using Laplace and Hankel transforms, then inverted numerically. Existing solutions for flow in leaky unconfined aquifers neglect the unsaturated zone following an assumption of instantaneous drainage due to Neuman. We extend the theory of leakage in unconfined aquifers by (1) including water flow and storage in the unsaturated zone above the water table, and (2) allowing the finite-diameter pumping well to partially penetrate the aquifer. The investigation of model-predicted results shows that aquitard leakage leads to significant departure from the unconfined solution without leakage. The investigation of dimensionless time-drawdown relationships shows that the aquitard drawdown also depends on unsaturated zone properties and the pumping-well wellbore storage effects.

The solution of certain loss of contact between a plate and unilateral supports

Directory of Open Access Journals (Sweden)

Sompornjaroensuk Yos

2007-01-01

Full Text Available This paper examines the loss of contact between a square plate and the unilateral supports under uniformly distributed load. Since the plate is rested on the unilateral supports, it will have the regions of lost contact between a plate and the supports due to the absence of restraining corner force at the plate corners. This leads to the mixed boundary conditions and these conditions are then written in the form of dual-series equations which can further be reduced to a Fredholm integral equation by taking advantage of finite Hankel transform technique. Numerical results are given for the deflections of free edge and deflections along the middle line of the plate with deferent values of the Poisson’s ratio. In addition, the deflection surface is also presented. From the investigation, it can be indicated that the loss of contact is decreased upon the increasing Poisson’s ratio.

Stepwise transformation behavior of the strain-induced martensitic transformation in a metastable stainless steel

International Nuclear Information System (INIS)

Hedstroem, Peter; Lienert, Ulrich; Almer, Jon; Oden, Magnus

2007-01-01

In situ high-energy X-ray diffraction during tensile loading has been used to investigate the evolution of lattice strains and the accompanying strain-induced martensitic transformation in cold-rolled sheets of a metastable stainless steel. At high applied strains the transformation to α-martensite occurs in stepwise bursts. These stepwise transformation events are correlated with stepwise increased lattice strains and peak broadening in the austenite phase. The stepwise transformation arises from growth of α-martensite embryos by autocatalytic transformation

Optimal oscillation-center transformations

International Nuclear Information System (INIS)

Dewar, R.L.

1984-08-01

A variational principle is proposed for defining that canonical transformation, continuously connected with the identity transformation, which minimizes the residual, coordinate-dependent part of the new Hamiltonian. The principle is based on minimization of the mean-square generalized force. The transformation reduces to the action-angle transformation in that part of the phase space of an integrable system where the orbit topology is that of the unperturbed system, or on primary KAM surfaces. General arguments in favor of this definition are given, based on Galilean invariance, decay of the Fourier spectrum, and its ability to include external fields or inhomogeneous systems. The optimal oscillation-center transformation for the physical pendulum, or particle in a sinusoidal potential, is constructed

High pressure phase transformations revisited

Science.gov (United States)

Levitas, Valery I.

2018-04-01

High pressure phase transformations play an important role in the search for new materials and material synthesis, as well as in geophysics. However, they are poorly characterized, and phase transformation pressure and pressure hysteresis vary drastically in experiments of different researchers, with different pressure transmitting media, and with different material suppliers. Here we review the current state, challenges in studying phase transformations under high pressure, and the possible ways in overcoming the challenges. This field is critically compared with fields of phase transformations under normal pressure in steels and shape memory alloys, as well as plastic deformation of materials. The main reason for the above mentioned discrepancy is the lack of understanding that there is a fundamental difference between pressure-induced transformations under hydrostatic conditions, stress-induced transformations under nonhydrostatic conditions below yield, and strain-induced transformations during plastic flow. Each of these types of transformations has different mechanisms and requires a completely different thermodynamic and kinetic description and experimental characterization. In comparison with other fields the following challenges are indicated for high pressure phase transformation: (a) initial and evolving microstructure is not included in characterization of transformations; (b) continuum theory is poorly developed; (c) heterogeneous stress and strain fields in experiments are not determined, which leads to confusing material transformational properties with a system behavior. Some ways to advance the field of high pressure phase transformations are suggested. The key points are: (a) to take into account plastic deformations and microstructure evolution during transformations; (b) to formulate phase transformation criteria and kinetic equations in terms of stress and plastic strain tensors (instead of pressure alone); (c) to develop multiscale continuum

High pressure phase transformations revisited.

Science.gov (United States)

Levitas, Valery I

2018-04-25

High pressure phase transformations play an important role in the search for new materials and material synthesis, as well as in geophysics. However, they are poorly characterized, and phase transformation pressure and pressure hysteresis vary drastically in experiments of different researchers, with different pressure transmitting media, and with different material suppliers. Here we review the current state, challenges in studying phase transformations under high pressure, and the possible ways in overcoming the challenges. This field is critically compared with fields of phase transformations under normal pressure in steels and shape memory alloys, as well as plastic deformation of materials. The main reason for the above mentioned discrepancy is the lack of understanding that there is a fundamental difference between pressure-induced transformations under hydrostatic conditions, stress-induced transformations under nonhydrostatic conditions below yield, and strain-induced transformations during plastic flow. Each of these types of transformations has different mechanisms and requires a completely different thermodynamic and kinetic description and experimental characterization. In comparison with other fields the following challenges are indicated for high pressure phase transformation: (a) initial and evolving microstructure is not included in characterization of transformations; (b) continuum theory is poorly developed; (c) heterogeneous stress and strain fields in experiments are not determined, which leads to confusing material transformational properties with a system behavior. Some ways to advance the field of high pressure phase transformations are suggested. The key points are: (a) to take into account plastic deformations and microstructure evolution during transformations; (b) to formulate phase transformation criteria and kinetic equations in terms of stress and plastic strain tensors (instead of pressure alone); (c) to develop multiscale continuum

Transformer oil maintenance

Energy Technology Data Exchange (ETDEWEB)

White, J. [A.F. White Ltd., Brantford, ON (Canada)

2002-08-01

Proactive treatment is required in the case of transformer oil, since the oil degrades over time, which could result in the potential failure of the transformer or costly repairs. A mineral-based oil is used for transformers because of its chemical properties and dielectric strength. Water and particulate are the main contaminants found in transformer oil, affecting the quality of the oil through reduced insulation. Acid that forms in the oil when reacting with oxygen is called oxidization. It reduces the heat dissipation of the transformer as the acid forms sludge which settles on the windings of the transformer. The first step in the preventive maintenance program associated with transformer oil is the testing of the oil. The base line is established through initial testing, and subsequent annual testing identifies any changes. The minimal requirements are: (1) dielectric breakdown, a measure of the voltage conducted by the oil; (2) neutralization/acid number, which detects the level of acid present in the oil; (3) interfacial tension, which identifies the presence of polar compounds; (4) colour, which displays quality, aging and the presence of contaminants; and (5) water, which decreases the dielectric breakdown voltage. The analysis of the gases present in the oil is another useful tool in a maintenance program for the determination of a possible fault such as arcing, corona or overheated connections and is accomplished through Dissolved Gas Analysis (DGA). Remediation treatment includes upgrading the oil. Ideally, reclamation should be performed in the early stages of the acid buildup before sludging occurs. Onsite reclamation includes Fuller's earth processing and degasification, a process briefly described by the author.

Coaxial pulse matching transformer

International Nuclear Information System (INIS)

Ledenev, V.V.; Khimenko, L.T.

1986-01-01

This paper describes a coaxial pulse matching transformer with comparatively simple design, increased mechanical strength, and low stray inductance. The transformer design makes it easy to change the turns ratio. The circuit of the device and an expression for the current multiplication factor are presented; experiments confirm the efficiency of the transformer. Apparatus with a coaxial transformer for producing high-power pulsed magnetic fields is designed (current pulses of 1-10 MA into a load and a natural frequency of 100 kHz)

Generalized field-transforming metamaterials

International Nuclear Information System (INIS)

Tretyakov, Sergei A; Nefedov, Igor S; Alitalo, Pekka

2008-01-01

In this paper, we introduce a generalized concept of field-transforming metamaterials, which perform field transformations defined as linear relations between the original and transformed fields. These artificial media change the fields in a prescribed fashion in the volume occupied by the medium. We show what electromagnetic properties of transforming medium are required. The coefficients of these linear functions can be arbitrary scalar functions of position and frequency, which makes the approach quite general and opens a possibility to realize various unusual devices.

Transformers and motors

CERN Document Server

Shultz, George

1991-01-01

Transformers and Motors is an in-depth technical reference which was originally written for the National Joint Apprenticeship Training Committee to train apprentice and journeymen electricians. This book provides detailed information for equipment installation and covers equipment maintenance and repair. The book also includes troubleshooting and replacement guidelines, and it contains a minimum of theory and math.In this easy-to-understand, practical sourcebook, you'll discover:* Explanations of the fundamental concepts of transformers and motors* Transformer connections and d

The transformation techniques in path integration

International Nuclear Information System (INIS)

Inomata, A.

1989-01-01

In this paper general remarks are made concerning the time transformation techniques in path integration and their implementations. Time transformations may be divided into two classes: global (integrable) time transformations and local (nonintegrable) time transformations. Although a brief account of global time transformations is given, attention is focused on local transformations. First, time transformations in the classical Kepler problem are reviewed. Then, problems encountered in implementing a local time transformation in quantum mechanics are analyzed. A several propositions pertinent to the implementation of local time transformations, particularly basic to the local time rescaling trick in a discretized path integral, are presented

Comparing relational model transformation technologies: implementing Query/View/Transformation with Triple Graph Grammars

DEFF Research Database (Denmark)

Greenyer, Joel; Kindler, Ekkart

2010-01-01

and for model-based software engineering approaches in general. QVT (Query/View/Transformation) is the transformation technology recently proposed for this purpose by the OMG. TGGs (Triple Graph Grammars) are another transformation technology proposed in the mid-nineties, used for example in the FUJABA CASE...

Phase transformation and diffusion

CERN Document Server

Kale, G B; Dey, G K

2008-01-01

Given that the basic purpose of all research in materials science and technology is to tailor the properties of materials to suit specific applications, phase transformations are the natural key to the fine-tuning of the structural, mechanical and corrosion properties. A basic understanding of the kinetics and mechanisms of phase transformation is therefore of vital importance. Apart from a few cases involving crystallographic martensitic transformations, all phase transformations are mediated by diffusion. Thus, proper control and understanding of the process of diffusion during nucleation, g

Transformation of Digital Ecosystems

DEFF Research Database (Denmark)

Henningsson, Stefan; Hedman, Jonas

2014-01-01

the Digital Ecosystem Technology Transformation (DETT) framework for explaining technology-based transformation of digital ecosystems by integrating theories of business and technology ecosystems. The framework depicts ecosystem transformation as distributed and emergent from micro-, meso-, and macro- level......In digital ecosystems, the fusion relation between business and technology means that the decision of technical compatibility of the offering is also the decision of how to position the firm relative to the coopetive relations that characterize business ecosystems. In this article we develop...... coopetition. The DETT framework consists an alternative to the existing explanations of digital ecosystem transformation as the rational management of one central actor balancing ecosystem tensions. We illustrate the use of the framework by a case study of transformation in the digital payment ecosystem...

INFORMATION MODEL OF SOCIAL TRANSFORMATIONS

Directory of Open Access Journals (Sweden)

Мария Васильевна Комова

2013-09-01

Full Text Available The social transformation is considered as a process of qualitative changes of the society, creating a new level of organization in all areas of life, in different social formations, societies of different types of development. The purpose of the study is to create a universal model for studying social transformations based on their understanding as the consequence of the information exchange processes in the society. After defining the conceptual model of the study, the author uses the following methods: the descriptive method, analysis, synthesis, comparison.Information, objectively existing in all elements and systems of the material world, is an integral attribute of the society transformation as well. The information model of social transformations is based on the definition of the society transformation as the change in the information that functions in the society’s information space. The study of social transformations is the study of information flows circulating in the society and being characterized by different spatial, temporal, and structural states. Social transformations are a highly integrated system of social processes and phenomena, the nature, course and consequences of which are affected by the factors representing the whole complex of material objects. The integrated information model of social transformations foresees the interaction of the following components: social memory, information space, and the social ideal. To determine the dynamics and intensity of social transformations the author uses the notions of "information threshold of social transformations" and "information pressure".Thus, the universal nature of information leads to considering social transformations as a system of information exchange processes. Social transformations can be extended to any episteme actualized by social needs. The establishment of an information threshold allows to simulate the course of social development, to predict the

Laplace transforms essentials

CERN Document Server

Shafii-Mousavi, Morteza

2012-01-01

REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Laplace Transforms includes the Laplace transform, the inverse Laplace transform, special functions and properties, applications to ordinary linear differential equations, Fourier tr

Sustainable transformation

DEFF Research Database (Denmark)

Andersen, Nicolai Bo

This paper is about sustainable transformation with a particular focus on listed buildings. It is based on the notion that sustainability is not just a question of energy conditions, but also about the building being robust. Robust architecture means that the building can be maintained and rebuilt......, that it can be adapted to changing functional needs, and that it has an architectural and cultural value. A specific proposal for a transformation that enhances the architectural qualities and building heritage values of an existing building forms the empirical material, which is discussed using different...... theoretical lenses. It is proposed that three parameters concerning the ꞌtransformabilityꞌ of the building can contribute to a more nuanced understanding of sustainable transformation: technical aspects, programmatic requirements and narrative value. It is proposed that the concept of ꞌsustainable...

Identity transformation

DEFF Research Database (Denmark)

Neergaard, Helle; Robinson, Sarah; Jones, Sally

, as well as the resources they have when they come to the classroom. It also incorporates perspectives from (ii) transformational learning and explores the concept of (iii) nudging from a pedagogical viewpoint, proposing it as an important tool in entrepreneurship education. The study incorporates......This paper develops the concept of ‘pedagogical nudging’ and examines four interventions in an entrepreneurship classroom and the potential it has for student identity transformation. Pedagogical nudging is positioned as a tool, which in the hands of a reflective, professional......) assists students in straddling the divide between identities, the emotions and tensions this elicits, and (iv) transform student understanding. We extend nudging theory into a new territory. Pedagogical nudging techniques may be able to unlock doors and bring our students beyond the unacknowledged...

Life cycle of transformer oil

Directory of Open Access Journals (Sweden)

Đurđević Ksenija R.

2008-01-01

Full Text Available The consumption of electric power is constantly increasing due to industrialization and population growth. This results in much more severe operating conditions of transformers, the most important electrical devices that make integral parts of power transmission and distribution systems. The designed operating life of the majority of worldwide transformers has already expired, which puts the increase of transformer reliability and operating life extension in the spotlight. Transformer oil plays a very important role in transformer operation, since it provides insulation and cooling, helps extinguishing sparks and dissolves gases formed during oil degradation. In addition to this, it also dissolves moisture and gases from cellulose insulation and atmosphere it is exposed to. Further and by no means less important functions of transformer are of diagnostic purpose. It has been determined that examination and inspection of insulation oil provide 70% of information on transformer condition, which can be divided in three main groups: dielectric condition, aged transformer condition and oil degradation condition. By inspecting and examining the application oil it is possible to determine the condition of insulation, oil and solid insulation (paper, as well as irregularities in transformer operation. All of the above-mentioned reasons and facts create ground for the subject of this research covering two stages of transformer oil life cycle: (1 proactive maintenance and monitoring of transformer oils in the course of utilization with reference to influence of transformer oil condition on paper insulation condition, as well as the condition of the transformer itself; (2 regeneration of transformer oils for the purpose of extension of utilization period and paper insulation revitalization potential by means of oil purification. The study highlights advantages of oil-paper insulation revitalization over oil replacement. Besides economic, there are

Distributed photovoltaic grid transformers

CERN Document Server

Shertukde, Hemchandra Madhusudan

2014-01-01

The demand for alternative energy sources fuels the need for electric power and controls engineers to possess a practical understanding of transformers suitable for solar energy. Meeting that need, Distributed Photovoltaic Grid Transformers begins by explaining the basic theory behind transformers in the solar power arena, and then progresses to describe the development, manufacture, and sale of distributed photovoltaic (PV) grid transformers, which help boost the electric DC voltage (generally at 30 volts) harnessed by a PV panel to a higher level (generally at 115 volts or higher) once it is

Chemical Transformation Simulator

Science.gov (United States)

The Chemical Transformation Simulator (CTS) is a web-based, high-throughput screening tool that automates the calculation and collection of physicochemical properties for an organic chemical of interest and its predicted products resulting from transformations in environmental sy...

Landskabets transformation

DEFF Research Database (Denmark)

Munck Petersen, Rikke

2005-01-01

Seminaroplæg fra forskere. Faglige seminarer på KA, forår 2005. Belyser transformation af det danske landskab fysisk som holdningsmæssigt, samt hvordan phd-arbejdets egen proces håndterer den.......Seminaroplæg fra forskere. Faglige seminarer på KA, forår 2005. Belyser transformation af det danske landskab fysisk som holdningsmæssigt, samt hvordan phd-arbejdets egen proces håndterer den....

Environmental cost of distribution transformer losses

International Nuclear Information System (INIS)

Georgilakis, Pavlos S.

2011-01-01

Improvements in energy efficiency of electrical equipment reduce the greenhouse gas (GHG) emissions and contribute to the protection of the environment. Moreover, as system investment and energy costs continue to increase, electric utilities are increasingly interested in installing energy-efficient transformers at their distribution networks. This paper analyzes the impact of the environmental cost of transformer losses on the economic evaluation of distribution transformers. This environmental cost is coming form the cost to buy GHG emission credits because of the GHG emissions associated with supplying transformer losses throughout the transformer lifetime. Application results on the Hellenic power system for 21 transformer offers under 9 different scenarios indicate that the environmental cost of transformer losses can reach on average 34% and 8% of transformer purchasing price for high loss and medium loss transformers, respectively. That is why it is important to incorporate the environmental cost of transformer losses into the economic evaluation of distribution transformers.

Transformative environmental governance

Science.gov (United States)

Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to ...

Fourier transforms principles and applications

CERN Document Server

Hansen, Eric W

2014-01-01

Fourier Transforms: Principles and Applications explains transform methods and their applications to electrical systems from circuits, antennas, and signal processors-ably guiding readers from vector space concepts through the Discrete Fourier Transform (DFT), Fourier series, and Fourier transform to other related transform methods.  Featuring chapter end summaries of key results, over two hundred examples and four hundred homework problems, and a Solutions Manual this book is perfect for graduate students in signal processing and communications as well as practicing engineers.

Kinetics of phase transformations

International Nuclear Information System (INIS)

Thompson, M.O.; Aziz, M.J.; Stephenson, G.B.

1992-01-01

This volume contains papers presented at the Materials Research Society symposium on Kinetics of Phase Transformations held in Boston, Massachusetts from November 26-29, 1990. The symposium provided a forum for research results in an exceptionally broad and interdisciplinary field. Presentations covered nearly every major class of transformations including solid-solid, liquid-solid, transport phenomena and kinetics modeling. Papers involving amorphous Si, a dominant topic at the symposium, are collected in the first section followed by sections on four major areas of transformation kinetics. The symposium opened with joint sessions on ion and electron beam induced transformations in conjunction with the Surface Chemistry and Beam-Solid Interactions: symposium. Subsequent sessions focused on the areas of ordering and nonlinear diffusion kinetics, solid state reactions and amorphization, kinetics and defects of amorphous silicon, and kinetics of melting and solidification. Seven internationally recognized invited speakers reviewed many of the important problems and recent results in these areas, including defects in amorphous Si, crystal to glass transformations, ordering kinetics, solid-state amorphization, computer modeling, and liquid/solid transformations

Dual-Frequency Impedance Transformer Using Coupled-Line For Ultra-High Transforming Ratio

Directory of Open Access Journals (Sweden)

R. K. Barik

2017-12-01

Full Text Available In this paper, a new type of dual-frequency impedance transformer is presented for ultra-high transforming ratio. The proposed configuration consists of parallel coupled-line, series transmission lines and short-ended stubs. The even and odd-mode analysis is applied to obtain the design equations and hence to provide an accurate solution. Three examples of the dual-frequency transformer with load impedance of 500, 1000 and 1500 Ω are designed to study the matching capability and bandwidth property. To prove the frequency agility of the proposed network, three prototypes of dual-frequency impedance transformer with transforming ratio of 10, 20 and 30 are fabricated and tested. The measured return loss is greater than 15 dB at two operating frequencies for all the prototypes. Also, the bandwidth is more than 60 MHz at each frequency band for all the prototypes. The measured return loss is found in good agreement with the circuit and full-wave simulations.

Dependency Parsing with Transformed Feature

Directory of Open Access Journals (Sweden)

Fuxiang Wu

2017-01-01

Full Text Available Dependency parsing is an important subtask of natural language processing. In this paper, we propose an embedding feature transforming method for graph-based parsing, transform-based parsing, which directly utilizes the inner similarity of the features to extract information from all feature strings including the un-indexed strings and alleviate the feature sparse problem. The model transforms the extracted features to transformed features via applying a feature weight matrix, which consists of similarities between the feature strings. Since the matrix is usually rank-deficient because of similar feature strings, it would influence the strength of constraints. However, it is proven that the duplicate transformed features do not degrade the optimization algorithm: the margin infused relaxed algorithm. Moreover, this problem can be alleviated by reducing the number of the nearest transformed features of a feature. In addition, to further improve the parsing accuracy, a fusion parser is introduced to integrate transformed and original features. Our experiments verify that both transform-based and fusion parser improve the parsing accuracy compared to the corresponding feature-based parser.

CPS Transformation of Beta-Redexes

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse

2005-01-01

The extra compaction of the most compacting CPS transformation in existence, which is due to Sabry and Felleisen, is generally attributed to (1) making continuations occur first in CPS terms and (2) classifying more redexes as administrative. We show that this extra compaction is actually...... independent of the relative positions of values and continuations and furthermore that it is solely due to a context-sensitive transformation of beta-redexes. We stage the more compact CPS transformation into a first-order uncurrying phase and a context-insensitive CPS transformation. We also define a context......-insensitive CPS transformation that provides the extra compaction. This CPS transformation operates in one pass and is dependently typed....

CPS Transformation of Beta-Redexes

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse R.

2000-01-01

The extra compaction of the most compacting CPS transformation in existence, which is due to Sabry and Felleisen, is generally attributed to (1) making continuations occur first in CPS terms and (2) classifying more redexes as administrative. We show that this extra compaction is actually...... independent of the relative positions of values and continuations and furthermore that it is solely due to a context-sensitive transformation of beta-redexes. We stage the more compact CPS transformation into a first-order uncurrying phase and a context-insensitive CPS transformation. We also define a context......-insensitive CPS transformation that provides the extra compaction. This CPS transformation operates in one pass and is dependently typed....

Covariant Transform

OpenAIRE

Kisil, Vladimir V.

2010-01-01

The paper develops theory of covariant transform, which is inspired by the wavelet construction. It was observed that many interesting types of wavelets (or coherent states) arise from group representations which are not square integrable or vacuum vectors which are not admissible. Covariant transform extends an applicability of the popular wavelets construction to classic examples like the Hardy space H_2, Banach spaces, covariant functional calculus and many others. Keywords: Wavelets, cohe...

Transforming Anatomy

OpenAIRE

Hall, Anndee

2017-01-01

Abstract: Transforming Anatomy Studying historic books allows people to witness the transformation of the world right before their very eyes. The Bruxellensis Icones Anatomicae[1] by Andreas Vesalius is a vital piece of evidence in the movement from a more rudimentary understanding of the human body into the more complex and accurate development of modern anatomy. Vesalius’ research worked to both refute and confirm findings of his predecessor, the great historical Greek philosopher, Galen...

Schatten Class Operators in ℒ(La2(ℂ+\\msbm=MTMIB${\\cal L}\\left( {L_a^2 \\left( {{\\msbm C}_+ } \\right} \\right$

Directory of Open Access Journals (Sweden)

Das Namita

2017-12-01

and φ ∈ Sp. We also use these results to obtain Schatten class characterizations of little Hankel operators and bounded operators defined on the Bergman space La2(ℂ+\\msbm=MTMIB$L_a^2 \\left( {{\\msbm C}_+ } \\right$

Sequential Generalized Transforms on Function Space

Directory of Open Access Journals (Sweden)

Jae Gil Choi

2013-01-01

Full Text Available We define two sequential transforms on a function space Ca,b[0,T] induced by generalized Brownian motion process. We then establish the existence of the sequential transforms for functionals in a Banach algebra of functionals on Ca,b[0,T]. We also establish that any one of these transforms acts like an inverse transform of the other transform. Finally, we give some remarks about certain relations between our sequential transforms and other well-known transforms on Ca,b[0,T].

THREE-PHASE TRANSFORMER PARAMETERS CALCULATION CONSIDERING THE CORE SATURATION FOR THE MATLAB-SIMULINK TRANSFORMER MODEL

Directory of Open Access Journals (Sweden)

I. V. Novash

2015-01-01

Full Text Available This article describes the parameters calculation for the three-phase two-winding power transformer model taken from the SimPowerSystems library, which is the part of the MatLab- Simulink environment. Presented methodology is based on the power transformer nameplate data usage. Particular attention is paid to the power transformer magnetization curve para- meters  calculation.  The  methodology  of  the  three-phase  two-winding  power  transformer model parameters calculation considering the magnetization curve nonlinearity isn’t presented in Russian-and English-language sources. Power transformers demo models described in the SimPowerSystems user’s guide have already calculated parameters, but without reference to the sources of their determination. A power transformer is a nonlinear element of the power system, that’s why for its performance analysis in different modes of operation is necessary to have the magnetization curve parameters.The process analysis during no-load energizing of the power transformer is of special interest. This regime is accompanied by the inrush current on the supply side of the power transformer, which is several times larger than the transformer rated current. Sharp rising of the magnetizing current is explained by the magnetic core saturation. Therefore, magnetiza- tion characteristic accounting during transformer no-load energizing modeling is a mandatory requirement. Article authors attempt to put all calculating formulas in a more convenient form and validate the power transformer nonlinear magnetization characteristics parameters calcu- lation. Inrush current oscillograms obtained during the simulation experiment confirmed the adequacy of the calculated model parameters.

DESIGN IMPROVEMENTS IN MODERN DISTRIBUTION TRANSFORMERS

OpenAIRE

Ćućić, Branimir; Meško, Nina; Mikulić, Martina; Trstoglavec, Dominik

2017-01-01

In the paper design improvements of distribution transformers related to improved energy efficiency and environmental awareness are discussed. Eco design of transformers, amorphous transformers, voltage regulated transformers and transformers filled with ester liquids are analyzed. As a consequence of growing energy efficiency importance, European Commission has adopted new regulation which defines maximum permissible levels of load and no-load losses of transformers with rated...

Box-Cox transformation for QTL mapping.

Science.gov (United States)

Yang, Runqing; Yi, Nengjun; Xu, Shizhong

2006-01-01

The maximum likelihood method of QTL mapping assumes that the phenotypic values of a quantitative trait follow a normal distribution. If the assumption is violated, some forms of transformation should be taken to make the assumption approximately true. The Box-Cox transformation is a general transformation method which can be applied to many different types of data. The flexibility of the Box-Cox transformation is due to a variable, called transformation factor, appearing in the Box-Cox formula. We developed a maximum likelihood method that treats the transformation factor as an unknown parameter, which is estimated from the data simultaneously along with the QTL parameters. The method makes an objective choice of data transformation and thus can be applied to QTL analysis for many different types of data. Simulation studies show that (1) Box-Cox transformation can substantially increase the power of QTL detection; (2) Box-Cox transformation can replace some specialized transformation methods that are commonly used in QTL mapping; and (3) applying the Box-Cox transformation to data already normally distributed does not harm the result.

Flames of Transformation

DEFF Research Database (Denmark)

Sørensen, Tim Flohr; Bille, Mikkel

2008-01-01

This paper explores the transformative power of fire, its fundamental ability to change material worlds and affect our experience of its materiality. The paper examines material transformations related to death as a means of illustrating the powerful property of fire as a materially destructive yet...

Transforming the Force and Logistics Transformation

National Research Council Canada - National Science Library

Cook, Katherine M

2006-01-01

U.S. Army transformation strategy addresses the imperative to change the Army from a Cold War-oriented design to one that is more responsive, agile, and adaptable to present and emerging threats across...

Fourier transform NMR

International Nuclear Information System (INIS)

Hallenga, K.

1991-01-01

This paper discusses the concept of Fourier transformation one of the many precious legacies of the French mathematician Jean Baptiste Joseph Fourier, essential for understanding the link between continuous-wave (CW) and Fourier transform (FT) NMR. Although in modern FT NMR the methods used to obtain a frequency spectrum from the time-domain signal may vary greatly, from the efficient Cooley-Tukey algorithm to very elaborate iterative least-square methods based other maximum entropy method or on linear prediction, the principles for Fourier transformation are unchanged and give invaluable insight into the interconnection of many pairs of physical entities called Fourier pairs

Non-minimal Particle Creation from Asymptotic-de Sitter Inflation

Science.gov (United States)

Yusofi, E.; Mohsenzadeh, M.

2018-06-01

A general form of quasi-de Sitter(dS) modes is used to study the creation of particle during the inflation. Actually, by considering the general form of inflaton field equation as a function of the Hankel function index and by using the Planck 2015 constraint on spectral index, we obtain the possible new constraints for the values of coupling constant in the era with asymptotic-dS space-time. Then, we explicitly calculate the general form of expectation value of the created particles in terms of the Hankel function index and the conformal time. The correction terms in the number of created particles are very tiny in the early time but can have the significant effects in the later universe. Our result is general and at the early time limit confirm the conventional special results for the Minkowski and dS background.

Fundamentals of algebraic graph transformation

CERN Document Server

Ehrig, Hartmut; Prange, Ulrike; Taentzer, Gabriele

2006-01-01

Graphs are widely used to represent structural information in the form of objects and connections between them. Graph transformation is the rule-based manipulation of graphs, an increasingly important concept in computer science and related fields. This is the first textbook treatment of the algebraic approach to graph transformation, based on algebraic structures and category theory. Part I is an introduction to the classical case of graph and typed graph transformation. In Part II basic and advanced results are first shown for an abstract form of replacement systems, so-called adhesive high-level replacement systems based on category theory, and are then instantiated to several forms of graph and Petri net transformation systems. Part III develops typed attributed graph transformation, a technique of key relevance in the modeling of visual languages and in model transformation. Part IV contains a practical case study on model transformation and a presentation of the AGG (attributed graph grammar) tool envir...

Integral transformational coaching

NARCIS (Netherlands)

Keizer, W.A.J.; Nandram, S.S.

2009-01-01

In Chap. 12, Keizer and Nandram present the concept of Integral Transformational Coaching based on the concept of Flow and its effects on work performance. Integral Transformational Coaching is a method that prevents and cures unhealthy stress and burnout. They draw on some tried and tested

Lectures on integral transforms

CERN Document Server

Akhiezer, N I

1988-01-01

This book, which grew out of lectures given over the course of several years at Kharkov University for students in the Faculty of Mechanics and Mathematics, is devoted to classical integral transforms, principally the Fourier transform, and their applications. The author develops the general theory of the Fourier transform for the space L^1(E_n) of integrable functions of n variables. His proof of the inversion theorem is based on the general Bochner theorem on integral transforms, a theorem having other applications within the subject area of the book. The author also covers Fourier-Plancherel theory in L^2(E_n). In addition to the general theory of integral transforms, connections are established with other areas of mathematical analysis--such as the theory of harmonic and analytic functions, the theory of orthogonal polynomials, and the moment problem--as well as to mathematical physics.

Transformer engineering design, technology, and diagnostics

CERN Document Server

Kulkarni, SV

2012-01-01

Transformer Engineering: Design, Technology, and Diagnostics, Second Edition helps you design better transformers, apply advanced numerical field computations more effectively, and tackle operational and maintenance issues. Building on the bestselling Transformer Engineering: Design and Practice, this greatly expanded second edition also emphasizes diagnostic aspects and transformer-system interactions. What's New in This Edition Three new chapters on electromagnetic fields in transformers, transformer-system interactions and modeling, and monitoring and diagnostics An extensively revised chap

Elastic neutron diffraction study of transforming and non-transforming single crystal ZrV2

International Nuclear Information System (INIS)

Bostock, J.; Wong, M.; MacVicar, M.L.A.; Levinson, M.

1980-01-01

The mosaic spread of single crystal ZrV 2 is unusually narrow, approx. 1' from room temperature to 130K. For non-transforming perfect single crystal the mosaic gradually increases to approx. 1.86' at 4.2K; for transforming, twinned single crystal the room temperature mosaic is maintained to 110K, then increases to 2.76' at 94K when the crystal transforms to a mixed cubic (30%) and rhombohedral state (70%). The onset of the electronic instability (approx. 100K) is accompanied by an increase in diffuse scattering background which, for the twinned crystal, peaks at the structural transformation. The electronic instability coupled to the localized lattice stress appears to be the driving mechanism for the transformation

The Foldy-Wouthuysen transformation

International Nuclear Information System (INIS)

Costella, J.P.; McKellar, B.H.J.

1994-01-01

The Foldy-Wouthuysen transformation of Dirac Hamiltonian is generally taught as a mathematical trick that allows one to obtain a two-component theory in the low-energy limit. It is not often emphasised that the transformed representation is the only one in which one can take meaningful classical limit, in terms of particles and antiparticles. The history and physics of this transformation are briefly revised. 12 refs

Optimized nonorthogonal transforms for image compression.

Science.gov (United States)

Guleryuz, O G; Orchard, M T

1997-01-01

The transform coding of images is analyzed from a common standpoint in order to generate a framework for the design of optimal transforms. It is argued that all transform coders are alike in the way they manipulate the data structure formed by transform coefficients. A general energy compaction measure is proposed to generate optimized transforms with desirable characteristics particularly suited to the simple transform coding operation of scalar quantization and entropy coding. It is shown that the optimal linear decoder (inverse transform) must be an optimal linear estimator, independent of the structure of the transform generating the coefficients. A formulation that sequentially optimizes the transforms is presented, and design equations and algorithms for its computation provided. The properties of the resulting transform systems are investigated. In particular, it is shown that the resulting basis are nonorthogonal and complete, producing energy compaction optimized, decorrelated transform coefficients. Quantization issues related to nonorthogonal expansion coefficients are addressed with a simple, efficient algorithm. Two implementations are discussed, and image coding examples are given. It is shown that the proposed design framework results in systems with superior energy compaction properties and excellent coding results.

Model Validation in Ontology Based Transformations

Directory of Open Access Journals (Sweden)

Jesús M. Almendros-Jiménez

2012-10-01

Full Text Available Model Driven Engineering (MDE is an emerging approach of software engineering. MDE emphasizes the construction of models from which the implementation should be derived by applying model transformations. The Ontology Definition Meta-model (ODM has been proposed as a profile for UML models of the Web Ontology Language (OWL. In this context, transformations of UML models can be mapped into ODM/OWL transformations. On the other hand, model validation is a crucial task in model transformation. Meta-modeling permits to give a syntactic structure to source and target models. However, semantic requirements have to be imposed on source and target models. A given transformation will be sound when source and target models fulfill the syntactic and semantic requirements. In this paper, we present an approach for model validation in ODM based transformations. Adopting a logic programming based transformational approach we will show how it is possible to transform and validate models. Properties to be validated range from structural and semantic requirements of models (pre and post conditions to properties of the transformation (invariants. The approach has been applied to a well-known example of model transformation: the Entity-Relationship (ER to Relational Model (RM transformation.

Converting Differential Photometry Results to the Standard System using Transform Generator and Transform Applier (Abstract)

Science.gov (United States)

Ciocca, M.

2016-12-01

(Abstract only) Since Fall of 2014, AAVSO made available two very useful software tools: transform generator (tg) and transform applier (ta). tg, authored by Gordon Myers (gordonmyers@hotmail.com), is a program, running under python that allows the user to obtain the transformation coefficients of their imaging train. ta, authored by George Silvis, allows users to apply the transformation coefficients obtained previously to their photometric observation. The data so processed become then directly comparable to those of other observers. I will show how to obtain transform coefficient using two Standard Field (M 67 and NGC7790), how consistent the results are and as an application, I will present transformed data for two AAVSO Target stars, AE UMA and RR CET.

Designs of pulsed power cryogenic transformers

International Nuclear Information System (INIS)

Singh, S.K.; Heyne, C.J.; Hackowrth, D.T.; Shestak, E.J.; Eckels, P.W.; Rogers, J.D.

1988-01-01

The Westinghouse Electric Corporation has completed designs of three pulsed power cryogenic transformers of three pulsed power cryogenic transformers for the Los Alamos National Laboratory. These transformers will be configured to transfer their stored energy sequentially to an electro-magnetic launcher and form a three-stage power supply. The pulse transformers will act as two winding energy storage solenoids which provide a high current and energy pulse compression by transforming a 50 kA power supply into a megamp level power supply more appropriate for the electromagnetic launcher duty. This system differs from more traditional transformer applications in that significant current levels do not exists simultaneously in the two windings of the pulse transformer. This paper describes the designs of the pulsed power cryogenic transformers

Floral-dip transformation of flax (Linum usitatissimum) to generate transgenic progenies with a high transformation rate.

Science.gov (United States)

Bastaki, Nasmah K; Cullis, Christopher A

2014-12-19

Agrobacterium-mediated plant transformation via floral-dip is a widely used technique in the field of plant transformation and has been reported to be successful for many plant species. However, flax (Linum usitatissimum) transformation by floral-dip has not been reported. The goal of this protocol is to establish that Agrobacterium and the floral-dip method can be used to generate transgenic flax. We show that this technique is simple, inexpensive, efficient, and more importantly, gives a higher transformation rate than the current available methods of flax transformation. In summary, inflorescences of flax were dipped in a solution of Agrobacterium carrying a binary vector plasmid (T-DNA fragment plus the Linum Insertion Sequence, LIS-1) for 1 - 2 min. The plants were laid flat on their side for 24 hr. Then, plants were maintained under normal growth conditions until the next treatment. The process of dipping was repeated 2 - 3 times, with approximately 10 - 14 day intervals between dipping. The T1 seeds were collected and germinated on soil. After approximately two weeks, treated progenies were tested by direct PCR; 2 - 3 leaves were used per plant plus the appropriate T-DNA primers. Positive transformants were selected and grown to maturity. The transformation rate was unexpectedly high, with 50 - 60% of the seeds from treated plants being positive transformants. This is a higher transformation rate than those reported for Arabidopsis thaliana and other plant species, using floral-dip transformation. It is also the highest, which has been reported so far, for flax transformation using other methods for transformation.

Improving the cooling performance of electrical distribution transformer using transformer oil – Based MEPCM suspension

Directory of Open Access Journals (Sweden)

Mushtaq Ismael Hasan

2017-04-01

Full Text Available In this paper the electrical distribution transformer has been studied numerically and the effect of outside temperature on its cooling performance has been investigated. The temperature range studied covers the hot climate regions. 250 KVA distribution transformer is chosen as a study model. A novel cooling fluid is proposed to improve the cooling performance of this transformer, transformer oil-based microencapsulated phase change materials suspension is used with volume concentration (5–25% as a cooling fluid instead of pure transformer oil. Paraffin wax is used as a phase change material to make the suspension, in addition to the ability of heat absorption due to melting, the paraffin wax considered as a good electrical insulator. Results obtained show that, using of MEPCM suspension instead of pure transformer oil lead to improve the cooling performance of transformer by reducing its temperature and as a consequence increasing its protection against the breakdown. The melting fraction increased with increasing outside temperature up to certain temperature after which the melting fraction reach maximum constant value (MF = 1 which indicate that, the choosing of PCM depend on the environment in which the transformer is used.

Life cycle of transformer oil

OpenAIRE

Đurđević Ksenija R.; Vojinović-Miloradov Mirjana; Sokolović Slobodan M.

2008-01-01

The consumption of electric power is constantly increasing due to industrialization and population growth. This results in much more severe operating conditions of transformers, the most important electrical devices that make integral parts of power transmission and distribution systems. The designed operating life of the majority of worldwide transformers has already expired, which puts the increase of transformer reliability and operating life extension in the spotlight. Transformer oil pla...

Tunable fractional-order Fourier transformer

International Nuclear Information System (INIS)

Malyutin, A A

2006-01-01

A fractional two-dimensional Fourier transformer whose orders are tuned by means of optical quadrupoles is described. It is shown that in the optical scheme considered, the Fourier-transform order a element of [0,1] in one of the mutually orthogonal planes corresponds to the transform order (2-a) in another plane, i.e., to inversion and inverse Fourier transform of the order a. (laser modes and beams)

Multi-dimensional Laplace transforms and applications

International Nuclear Information System (INIS)

Mughrabi, T.A.

1988-01-01

In this dissertation we establish new theorems for computing certain types of multidimensional Laplace transform pairs from known one-dimensional Laplace transforms. The theorems are applied to the most commonly used special functions and so we obtain many two and three dimensional Laplace transform pairs. As applications, some boundary value problems involving linear partial differential equations are solved by the use of multi-dimensional Laplace transformation. Also we establish some relations between the Laplace transformation and other integral transformation in two variables

Image compression using the W-transform

Energy Technology Data Exchange (ETDEWEB)

Reynolds, W.D. Jr. [Argonne National Lab., IL (United States). Mathematics and Computer Science Div.

1995-12-31

The authors present the W-transform for a multiresolution signal decomposition. One of the differences between the wavelet transform and W-transform is that the W-transform leads to a nonorthogonal signal decomposition. Another difference between the two is the manner in which the W-transform handles the endpoints (boundaries) of the signal. This approach does not restrict the length of the signal to be a power of two. Furthermore, it does not call for the extension of the signal thus, the W-transform is a convenient tool for image compression. They present the basic theory behind the W-transform and include experimental simulations to demonstrate its capabilities.

Army Maintenance System Transformation

National Research Council Canada - National Science Library

Gilbertson, Frank V

2006-01-01

.... Used in conjunction with pertinent historical data and developed with Army transformation goals in mind, General Systems thinking can provide the framework for guiding maintenance transformation...

Bar piezoelectric ceramic transformers.

Science.gov (United States)

Erhart, Jiří; Pulpan, Půlpán; Rusin, Luboš

2013-07-01

Bar-shaped piezoelectric ceramic transformers (PTs) working in the longitudinal vibration mode (k31 mode) were studied. Two types of the transformer were designed--one with the electrode divided into two segments of different length, and one with the electrodes divided into three symmetrical segments. Parameters of studied transformers such as efficiency, transformation ratio, and input and output impedances were measured. An analytical model was developed for PT parameter calculation for both two- and three-segment PTs. Neither type of bar PT exhibited very high efficiency (maximum 72% for three-segment PT design) at a relatively high transformation ratio (it is 4 for two-segment PT and 2 for three-segment PT at the fundamental resonance mode). The optimum resistive loads were 20 and 10 kΩ for two- and three-segment PT designs for the fundamental resonance, respectively, and about one order of magnitude smaller for the higher overtone (i.e., 2 kΩ and 500 Ω, respectively). The no-load transformation ratio was less than 27 (maximum for two-segment electrode PT design). The optimum input electrode aspect ratios (0.48 for three-segment PT and 0.63 for two-segment PT) were calculated numerically under no-load conditions.

The Symmetric Rudin-Shapiro Transform

DEFF Research Database (Denmark)

Harbo, Anders La-Cour

2003-01-01

A method for constructing spread spectrum sequences is presented. The method is based on a linear, orthogonal, symmetric transform, the Rudin-Shapiro transform (RST), which is in many respects quite similar to the Haar wavelet packet transform. The RST provides the means for generating large sets...... of spread spectrum signals. This presentation provides a simple definition of the symmetric RST that leads to a fast N log(N) and numerically stable implementation of the transform....

Chemical effects of nuclear transformations

Energy Technology Data Exchange (ETDEWEB)

Bulbulian, S

1982-06-01

A brief survey of the present state of knowledge on the chemical effects of nuclear transformations is presented. The recoil energy produced by these transformations in the nuclide is often sufficiently high to disrupt the chemical ligands between these particular atoms affected by the nuclear transformations, while the rest of their molecules. It also contains a discussion of the different annealing processes that produce the cancellation of the chemical change produced by the nuclear transformation.

Analysis of a Segmented Annular Coplanar Capacitive Tilt Sensor with Increased Sensitivity

Directory of Open Access Journals (Sweden)

Jiahao Guo

2016-01-01

Full Text Available An investigation of a segmented annular coplanar capacitor is presented. We focus on its theoretical model, and a mathematical expression of the capacitance value is derived by solving a Laplace equation with Hankel transform. The finite element method is employed to verify the analytical result. Different control parameters are discussed, and each contribution to the capacitance value of the capacitor is obtained. On this basis, we analyze and optimize the structure parameters of a segmented coplanar capacitive tilt sensor, and three models with different positions of the electrode gap are fabricated and tested. The experimental result shows that the model (whose electrode-gap position is 10 mm from the electrode center realizes a high sensitivity: 0.129 pF/° with a non-linearity of <0.4% FS (full scale of ±40°. This finding offers plenty of opportunities for various measurement requirements in addition to achieving an optimized structure in practical design.

Finite element analysis of actively controlled smart plate with patched actuators and sensors

Directory of Open Access Journals (Sweden)

M. Yaqoob Yasin

Full Text Available The active vibration control of smart plate equipped with patched piezoelectric sensors and actuators is presented in this study. An equivalent single layer third order shear deformation theory is employed to model the kinematics of the plate and to obtain the shear strains. The governing equations of motion are derived using extended Hamilton's principle. Linear variation of electric potential across the piezoelectric layers in thickness direction is considered. The electrical variable is discretized by Lagrange interpolation function considering two-noded line element. Undamped natural frequencies and the corresponding mode shapes are obtained by solving the eigen value problem with and without electromechanical coupling. The finite element model in nodal variables are transformed into modal model and then recast into state space. The dynamic model is reduced for further analysis using Hankel norm for designing the controller. The optimal control technique is used to control the vibration of the plate.

Natural convection heat transfer in an oscillating vertical cylinder.

Science.gov (United States)

Khan, Ilyas; Ali Shah, Nehad; Tassaddiq, Asifa; Mustapha, Norzieha; Kechil, Seripah Awang

2018-01-01

This paper studies the heat transfer analysis caused due to free convection in a vertically oscillating cylinder. Exact solutions are determined by applying the Laplace and finite Hankel transforms. Expressions for temperature distribution and velocity field corresponding to cosine and sine oscillations are obtained. The solutions that have been obtained for velocity are presented in the forms of transient and post-transient solutions. Moreover, these solutions satisfy both the governing differential equation and all imposed initial and boundary conditions. Numerical computations and graphical illustrations are used in order to study the effects of Prandtl and Grashof numbers on velocity and temperature for various times. The transient solutions for both cosine and sine oscillations are also computed in tables. It is found that, the transient solutions are of considerable interest up to the times t = 15 for cosine oscillations and t = 1.75 for sine oscillations. After these moments, the transient solutions can be neglected and, the fluid moves according with the post-transient solutions.

Analytical extraction of leaky modes in circular slab waveguides with arbitrary refractive index profile.

Science.gov (United States)

Sarrafi, P; Zareian, N; Mehrany, K

2007-12-20

Circular slab waveguides are conformally transformed into straight inhomogeneous waveguides, whereupon electromagnetic fields in the core are expanded in terms of Legendre polynomial basis functions. Thereafter, different analytical expression of electromagnetic fields in the cladding region, viz. Wentzel-Kramers-Brillouin solution, modified Airy function expansion, and the exact field solution for circular waveguides, i.e., Hankel function of complex order, are each matched to the polynomial expansion of the transverse electric field within the guide. This field matching process renders different boundary conditions to be satisfied by the set of orthogonal Legendre polynomial basis functions. In this fashion, the governing wave equation is converted into an algebraic and easy to solve eigenvalue problem, which is associated with a matrix whose elements are analytically given. Various numerical examples are presented and the accuracy of each of the abovementioned different boundary conditions is assessed. Furthermore, the computational efficiency and the convergence rate of the proposed method with increasing number of basis functions are briefly discussed.

Analytical solution for the transport equation for neutral particles in cylindrical and Cartesian geometry

International Nuclear Information System (INIS)

Goncalves, Glenio Aguiar

2003-01-01

In this work, we are reported analytical solutions for the transport equation for neutral particles in cylindrical and cartesian geometry. For the cylindrical geometry, it is applied the Hankel transform of order zero in the S N approximation of the one-dimensional cylindrical transport equation, assuming azimuthal symmetry and isotropic scattering. This procedure is coined HTSN method. The anisotropic problem is handled using the decomposition method, generating a recursive approach, which the HTSN solution is used as initial condition. For cartesian geometry, the one and two dimensional transport equation is derived in the angular variable as many time as the degree of the anisotropic scattering. This procedure leads to set of integro-differential plus one differential equation that can be really solved by the variable separation method. Following this procedure, it was possible to come out with the Case solution for the one-dimensional problem. Numerical simulations are reported for the cylindrical transport problem both isotropic and anisotropic case of quadratic degree. (author)

Diffusion and sorption in particles and two-dimensional dispersion in a porous media

International Nuclear Information System (INIS)

Rasmuson, A.

1980-01-01

A solution of the two-dimensional differential equation of dispersion from a disk source, coupled with a differential equation of diffusion and sorption in particles, is developed. The solution is obtained by the successive use of the Laplace and the Hankel transforms and is given in the form of an infinite double-integral. If the lateral dispersion is negligible, the solution is shown to simplify to a solution presented earlier. Dimensionless quantities are introduced. A steady-state condition is obtained after long time. This is investigated in some detail. An expression is derived for the highest concentration which may be expected at a point in space. An important relation is obtained when longitudinal dispersion is neglected. The solution for any value of the lateral dispersion coefficient and radial distance from the source is then obtained by simple multiplication of a solution for no lateral dispersion with the steady-state value. A method for integrating the infinite double integral is given. Some typical examples are shown. (Auth.)

Microsoft C#.NET program and electromagnetic depth sounding for large loop source

Science.gov (United States)

Prabhakar Rao, K.; Ashok Babu, G.

2009-07-01

A program, in the C# (C Sharp) language with Microsoft.NET Framework, is developed to compute the normalized vertical magnetic field of a horizontal rectangular loop source placed on the surface of an n-layered earth. The field can be calculated either inside or outside the loop. Five C# classes with member functions in each class are, designed to compute the kernel, Hankel transform integral, coefficients for cubic spline interpolation between computed values and the normalized vertical magnetic field. The program computes the vertical magnetic field in the frequency domain using the integral expressions evaluated by a combination of straightforward numerical integration and the digital filter technique. The code utilizes different object-oriented programming (OOP) features. It finally computes the amplitude and phase of the normalized vertical magnetic field. The computed results are presented for geometric and parametric soundings. The code is developed in Microsoft.NET visual studio 2003 and uses various system class libraries.

A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in surface force apparatus.

Science.gov (United States)

Math, Souvik; Horn, Roger; Jayaram, Vikram; Biswas, Sanjay Kumar

2007-04-15

Currently data obtained from surface force apparatus experiments are convoluted with the mechanical response of glue of unknown thickness, used to bond mica sheets to the substrates. This paper describes a formulation to precisely deconvolute out the forces between the mica sheets by determining the thickness of glue, knowing the mechanical properties of the glue. The formulation consists of a general solution based on the noniterative Hankel transform of the Laplace equation. The generality is achieved by treating all the layers except the one in contact as an effective lumped system consisting of a set of springs in series, where each spring represents a layer. The solution is validated by nanoindentation of trilayer systems consisting of layers with widely diverse mechanical properties, some differing from each other by three orders of magnitude. SFA experiments are done with carefully metered slabs of glue. The proposed method is validated by comparing the actual glue thicknesses with those determined using the present analysis.

The Foldy--Wouthuysen transformation

International Nuclear Information System (INIS)

Costella, J.P.; McKellar, B.H.J.

1995-01-01

The Foldy--Wouthuysen transformation of the Dirac Hamiltonian is generally taught as simply a mathematical trick that allows one to obtain a two-component theory in the low-energy limit. It is not often emphasized that the transformed representation is the only one in which one can take a meaningful classical limit, in terms of particles and antiparticles. We briefly review the history and physics of this transformation. copyright 1995 American Association of Physics Teachers

Transformation quantum optics: designing spontaneous emission using coordinate transformations

DEFF Research Database (Denmark)

Zhang, Jingjing; Wubs, Martijn; Ginzburg, Pavel

2016-01-01

Spontaneous decay is a fundamental quantum property of emitters that can be controlled in a material environment via modification of the local density of optical states (LDOS). Here we use transformation optics methods in order to design required density of states and thus spontaneous emission (S......, affect the LDOS in complex materials. Tailoring SE properties using transformation optics approach provides an innovative way for designing emission properties in a complex material environment needed for the development of active nanophotonic devices....

Adaptive Wavelet Transforms

Energy Technology Data Exchange (ETDEWEB)

Szu, H.; Hsu, C. [Univ. of Southwestern Louisiana, Lafayette, LA (United States)

1996-12-31

Human sensors systems (HSS) may be approximately described as an adaptive or self-learning version of the Wavelet Transforms (WT) that are capable to learn from several input-output associative pairs of suitable transform mother wavelets. Such an Adaptive WT (AWT) is a redundant combination of mother wavelets to either represent or classify inputs.

ATLAS Job Transforms

CERN Document Server

Stewart, G A; The ATLAS collaboration; Maddocks, H J; Harenberg, T; Sandhoff, M; Sarrazin, B

2013-01-01

The need to run complex workflows for a high energy physics experiment such as ATLAS has always been present. However, as computing resources have become even more constrained, compared to the wealth of data generated by the LHC, the need to use resources efficiently and manage complex workflows within a single grid job have increased. In ATLAS, a new Job Transform framework has been developed that we describe in this paper. This framework manages the multiple execution steps needed to `transform' one data type into another (e.g., RAW data to ESD to AOD to final ntuple) and also provides a consistent interface for the ATLAS production system. The new framework uses a data driven workflow definition which is both easy to manage and powerful. After a transform is defined, jobs are expressed simply by specifying the input data and the desired output data. The transform infrastructure then executes only the necessary substeps to produce the final data products. The global execution cost of running the job is mini...

ATLAS Job Transforms

CERN Document Server

Stewart, G A; The ATLAS collaboration; Maddocks, H J; Harenberg, T; Sandhoff, M; Sarrazin, B

2013-01-01

The need to run complex workflows for a high energy physics experiment such as ATLAS has always been present. However, as computing resources have become even more constrained, compared to the wealth of data generated by the LHC, the need to use resources efficiently and manage complex workflows within a single grid job have increased. In ATLAS, a new Job Transform framework has been developed that we describe in this paper. This framework manages the multiple execution steps needed to 'transform' one data type into another (e.g., RAW data to ESD to AOD to final ntuple) and also provides a consistent interface for the ATLAS production system. The new framework uses a data driven workflow definition which is both easy to manage and powerful. After a transform is defined, jobs are expressed simply by specifying the input data and the desired output data. The transform infrastructure then executes only the necessary substeps to produce the final data products. The global execution cost of running the job is mini...

Inverse problem in transformation optics

DEFF Research Database (Denmark)

Novitsky, Andrey

2011-01-01

The straightforward method of transformation optics implies that one starts from the coordinate transformation and determines the Jacobian matrix, the fields and material parameters of the cloak. However, the coordinate transformation appears as an optional function: it is not necessary to know it...

Transformation of Botrytis cinerea by direct hyphal blasting or by wound-mediated transformation of sclerotia

Directory of Open Access Journals (Sweden)

Ish - Shalom Shahar

2011-12-01

Full Text Available Abstract Background Botrytis cinerea is a haploid necrotrophic ascomycete which is responsible for 'grey mold' disease in more than 200 plant species. Broad molecular research has been conducted on this pathogen in recent years, resulting in the sequencing of two strains, which has generated a wealth of information toward developing additional tools for molecular transcriptome, proteome and secretome investigations. Nonetheless, transformation protocols have remained a significant bottleneck for this pathogen, hindering functional analysis research in many labs. Results In this study, we tested three different transformation methods for B. cinerea: electroporation, air-pressure-mediated and sclerotium-mediated transformation. We demonstrate successful transformation with three different DNA constructs using both air-pressure- and sclerotium-mediated transformation. Conclusions These transformation methods, which are fast, simple and reproducible, can expedite functional gene analysis of B. cinerea.

Canonical transformations of Kepler trajectories

International Nuclear Information System (INIS)

Mostowski, Jan

2010-01-01

In this paper, canonical transformations generated by constants of motion in the case of the Kepler problem are discussed. It is shown that canonical transformations generated by angular momentum are rotations of the trajectory. Particular attention is paid to canonical transformations generated by the Runge-Lenz vector. It is shown that these transformations change the eccentricity of the orbit. A method of obtaining elliptic trajectories from the circular ones with the help of canonical trajectories is discussed.

The Symmetric Rudin-Shapiro Transform

DEFF Research Database (Denmark)

Harbo, Anders La-Cour

2003-01-01

A method for constructing spread spectrum sequences is presented. The method is based on a linear, orthogonal, and symmetric transform given as the Rudin-Shapiro transform (RST), which is in many respects quite similar to the Haar wavelet packet transform. The RST provides the means for generatin...... large sets of spread spectrum signals. This presentation provides a simple definition of the symmetric RST that leads to a fast N log(N) and numerically stable implementation of the transform....

High temperature co-axial winding transformers

Science.gov (United States)

Divan, Deepakraj M.; Novotny, Donald W.

1993-01-01

The analysis and design of co-axial winding transformers is presented. The design equations are derived and the different design approaches are discussed. One of the most important features of co-axial winding transformers is the fact that the leakage inductance is well controlled and can be made low. This is not the case in conventional winding transformers. In addition, the power density of co-axial winding transformers is higher than conventional ones. Hence, using co-axial winding transformers in a certain converter topology improves the power density of the converter. The design methodology used in meeting the proposed specifications of the co-axial winding transformer specifications are presented and discussed. The final transformer design was constructed in the lab. Co-axial winding transformers proved to be a good choice for high power density and high frequency applications. They have a more predictable performance compared with conventional transformers. In addition, the leakage inductance of the transformer can be controlled easily to suit a specific application. For space applications, one major concern is the extraction of heat from power apparatus to prevent excessive heating and hence damaging of these units. Because of the vacuum environment, the only way to extract heat is by using a cold plate. One advantage of co-axial winding transformers is that the surface area available to extract heat from is very large compared to conventional transformers. This stems from the unique structure of the co-axial transformer where the whole core surface area is exposed and can be utilized for cooling effectively. This is a crucial issue here since most of the losses are core losses.

Structural transformation in monolayer materials: a 2D to 1D transformation.

Science.gov (United States)

Momeni, Kasra; Attariani, Hamed; LeSar, Richard A

2016-07-20

Reducing the dimensions of materials to atomic scales results in a large portion of atoms being at or near the surface, with lower bond order and thus higher energy. At such scales, reduction of the surface energy and surface stresses can be the driving force for the formation of new low-dimensional nanostructures, and may be exhibited through surface relaxation and/or surface reconstruction, which can be utilized for tailoring the properties and phase transformation of nanomaterials without applying any external load. Here we used atomistic simulations and revealed an intrinsic structural transformation in monolayer materials that lowers their dimension from 2D nanosheets to 1D nanostructures to reduce their surface and elastic energies. Experimental evidence of such transformation has also been revealed for one of the predicted nanostructures. Such transformation plays an important role in bi-/multi-layer 2D materials.

Nonlocal transformation optics.

Science.gov (United States)

Castaldi, Giuseppe; Galdi, Vincenzo; Alù, Andrea; Engheta, Nader

2012-02-10

We show that the powerful framework of transformation optics may be exploited for engineering the nonlocal response of artificial electromagnetic materials. Relying on the form-invariant properties of coordinate-transformed Maxwell's equations in the spectral domain, we derive the general constitutive "blueprints" of transformation media yielding prescribed nonlocal field-manipulation effects and provide a physically incisive and powerful geometrical interpretation in terms of deformation of the equifrequency contours. In order to illustrate the potentials of our approach, we present an example of application to a wave-splitting refraction scenario, which may be implemented via a simple class of artificial materials. Our results provide a systematic and versatile framework which may open intriguing venues in dispersion engineering of artificial materials.

Improving the cooling performance of electrical distribution transformer using transformer oil – Based MEPCM suspension

OpenAIRE

Mushtaq Ismael Hasan

2017-01-01

In this paper the electrical distribution transformer has been studied numerically and the effect of outside temperature on its cooling performance has been investigated. The temperature range studied covers the hot climate regions. 250 KVA distribution transformer is chosen as a study model. A novel cooling fluid is proposed to improve the cooling performance of this transformer, transformer oil-based microencapsulated phase change materials suspension is used with volume concentration (5–25...

Agrobacterium tumefaciens-Mediated Transformation

DEFF Research Database (Denmark)

Frandsen, Rasmus John Normand

2015-01-01

The use of Agrobacterium tumefaciens-mediated transformation for achieving genetic transformation of fungi has steadily increased over the last decade, and has proven to be almost universally applicable technique once suitable selection markers have been developed. In recent years the major...... technical advances has been made within the initial steps of the process, more specifically the efficient construction of plasmids for performing targeted genome modifications. This chapter provides a generic protocol for performing genetic transformation of ascomycetes via A. tumefaciens......-mediated transformation (AMT) and guidelines for optimizing the AMT process with new fungal species. The chapter also includes a highly efficient vector construction system based on Uracil Specific Excisions Reagent (USER) cloning and specific PCR generated building blocks, which can be combined ad hoc to create complex...

Lightweight, high-frequency transformers

Science.gov (United States)

Schwarze, G. E.

1983-01-01

The 25-kVA space transformer was developed under contract by Thermal Technology Laboratory, Buffalo, N. Y. The NASA Lewis transformer technology program attempted to develop the baseline technology. For the 25-kVA transformer the input voltage was chosen as 200 V, the output voltage as 1500 V, the input voltage waveform as square wave, the duty cycle as continuous, the frequency range (within certain constraints) as 10 to 40 kHz, the operating temperatures as 85 deg. and 130 C, the baseplate temperature as 50 C, the equivalent leakage inductance as less than 10 micro-h, the operating environment as space, and the life expectancy as 10 years. Such a transformer can also be used for aircraft, ship and terrestrial applications.

Unitary Transformation in Quantum Teleportation

International Nuclear Information System (INIS)

Wang Zhengchuan

2006-01-01

In the well-known treatment of quantum teleportation, the receiver should convert the state of his EPR particle into the replica of the unknown quantum state by one of four possible unitary transformations. However, the importance of these unitary transformations must be emphasized. We will show in this paper that the receiver cannot transform the state of his particle into an exact replica of the unknown state which the sender wants to transfer if he has not a proper implementation of these unitary transformations. In the procedure of converting state, the inevitable coupling between EPR particle and environment which is needed by the implementation of unitary transformations will reduce the accuracy of the replica.

Overcurrent protection of transformers. Part 2: Traditional and new fusing philosophies for small and large transformers

Energy Technology Data Exchange (ETDEWEB)

Cook, C. J.; Niemira, J. K.

2003-07-01

New and traditional fusing philosophies for protecting transformers are discussed. This second in a two-part paper covers selection criteria for a transformer-primary fuse to protect the transformer consistent with industry-accepted through-fault protection curves. Also covered are the principles of coordination as they relate to the proper selection of the primary-side fuse and power fuses and the principles underlying the protection of load-side conductors and cables. The critical nature of secondary fault protection on small three-phase transformers used on industrial, commercial, and institutional power systems, as well as small-to-medium size three-phase power transformers used in utility substations is emphasized, in view of the long lead time and expense involved in replacing these transformers. In contrast, no special protection recommendations are made for small-kVA overhead distribution transformers, since they are not considered likely to experience secondary faults, and the rare faults that do occur will not likely be detected and cleared by the primary fuse. Also of importance is the fact that these transformers are inexpensive and readily available. Overall, large fuse rating, used in combination with a tank-mounted surge arrester is recommended, because it can provide better transformer protection than the smaller fuse ratings traditionally employed. 4 refs., 2 tabs., 4 figs.

Magnetic bead detection using nano-transformers

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyung Kwon; Ahn, Doyeol [Institute of Quantum Information Processing and Systems, University of Seoul, 90 Jeonnong, Dongdaemun, Seoul 130-743 (Korea, Republic of); Hwang, Jong Seung; Hwang, Sung Woo, E-mail: dahn@uos.ac.kr [Research Center for Time-domain Nano-functional Devices and School of Electrical Engineering, Korea University, 5-1 Anam, Sungbuk, Seoul 136-701 (Korea, Republic of)

2010-11-19

A novel scheme to detect magnetic beads using a nano-scale transformer with a femtoweber resolution is reported. We have performed a Faraday's induction experiment with the nano-transformer at room temperature. The transformer shows the linear output voltage responses to the sinusoidal input current. When magnetic beads are placed on the transformer, the output responses are increased by an amount corresponding to the added magnetic flux from the beads when compared with the case of no beads on the transformer. In this way, we could determine whether magnetic beads are on top of the transformer in a single particle level.

Magnetic bead detection using nano-transformers.

Science.gov (United States)

Kim, Hyung Kwon; Hwang, Jong Seung; Hwang, Sung Woo; Ahn, Doyeol

2010-11-19

A novel scheme to detect magnetic beads using a nano-scale transformer with a femtoweber resolution is reported. We have performed a Faraday's induction experiment with the nano-transformer at room temperature. The transformer shows the linear output voltage responses to the sinusoidal input current. When magnetic beads are placed on the transformer, the output responses are increased by an amount corresponding to the added magnetic flux from the beads when compared with the case of no beads on the transformer. In this way, we could determine whether magnetic beads are on top of the transformer in a single particle level.

Fractional Laplace Transforms - A Perspective

Directory of Open Access Journals (Sweden)

Rudolf A. Treumann

2014-06-01

Full Text Available A new form of the Laplace transform is reviewed as a paradigm for an entire class of fractional functional transforms. Various of its properties are discussed. Such transformations should be useful in application to differential/integral equations or problems in non-extensive statistical mechanics.

A rapid and robust method of identifying transformed Arabidopsis thaliana seedlings following floral dip transformation

Directory of Open Access Journals (Sweden)

Gray John C

2006-11-01

Full Text Available Abstract Background The floral dip method of transformation by immersion of inflorescences in a suspension of Agrobacterium is the method of choice for Arabidopsis transformation. The presence of a marker, usually antibiotic- or herbicide-resistance, allows identification of transformed seedlings from untransformed seedlings. Seedling selection is a lengthy process which does not always lead to easily identifiable transformants. Selection for kanamycin-, phosphinothricin- and hygromycin B-resistance commonly takes 7–10 d and high seedling density and fungal contamination may result in failure to recover transformants. Results A method for identifying transformed seedlings in as little as 3.25 d has been developed. Arabidopsis T1 seeds obtained after floral dip transformation are plated on 1% agar containing MS medium and kanamycin, phosphinothricin or hygromycin B, as appropriate. After a 2-d stratification period, seeds are subjected to a regime of 4–6 h light, 48 h dark and 24 h light (3.25 d. Kanamycin-resistant and phosphinothricin-resistant seedlings are easily distinguished from non-resistant seedlings by green expanded cotyledons whereas non-resistant seedlings have pale unexpanded cotyledons. Seedlings grown on hygromycin B differ from those grown on kanamycin and phosphinothricin as both resistant and non-resistant seedlings are green. However, hygromycin B-resistant seedlings are easily identified as they have long hypocotyls (0.8–1.0 cm whereas non-resistant seedlings have short hypocotyls (0.2–0.4 cm. Conclusion The method presented here is an improvement on current selection methods as it allows quicker identification of transformed seedlings: transformed seedlings are easily discernable from non-transformants in as little as 3.25 d in comparison to the 7–10 d required for selection using current protocols.

Coefficient inequality for certain subclass of analytic functions

Directory of Open Access Journals (Sweden)

D. Vamshee Krishna

2013-03-01

Full Text Available The objective of this paper is to an obtain an upper bound to the second Hankel determinant $|a_{2}a_{4}-a_{3}^{2}|$ for the function $f$, belonging to a certain subclass of analytic functions, using Toeplitz determinants.

On Similarity Invariance of Balancing for Nonlinear Systems

NARCIS (Netherlands)

Scherpen, Jacquelien M.A.

1995-01-01

A previously obtained balancing method for nonlinear systems is investigated on similarity in variance by generalization of the observations on the similarity invariance of the linear balanced realization theory. For linear systems it is well known that the Hankel singular values are similarity

Fast inverse nonlinear Fourier transformation using exponential one-step methods : Darboux transformation

NARCIS (Netherlands)

Vaibhav, V.K.

2017-01-01

This paper considers the non-Hermitian Zakharov-Shabat (ZS) scattering problem which forms the basis for defining the SU(2) nonlinear Fourier transformation (NFT). The theoretical underpinnings of this generalization of the conventional Fourier transformation are quite well established in the

Enhancing Understanding of Transformation Matrices

Science.gov (United States)

Dick, Jonathan; Childrey, Maria

2012-01-01

With the Common Core State Standards' emphasis on transformations, teachers need a variety of approaches to increase student understanding. Teaching matrix transformations by focusing on row vectors gives students tools to create matrices to perform transformations. This empowerment opens many doors: Students are able to create the matrices for…

Parallel plate transmission line transformer

NARCIS (Netherlands)

Voeten, S.J.; Brussaard, G.J.H.; Pemen, A.J.M.

2011-01-01

A Transmission Line Transformer (TLT) can be used to transform high-voltage nanosecond pulses. These transformers rely on the fact that the length of the pulse is shorter than the transmission lines used. This allows connecting the transmission lines in parallel at the input and in series at the

Inversion of the star transform

International Nuclear Information System (INIS)

Zhao, Fan; Schotland, John C; Markel, Vadim A

2014-01-01

We define the star transform as a generalization of the broken ray transform introduced by us in previous work. The advantages of using the star transform include the possibility to reconstruct the absorption and the scattering coefficients of the medium separately and simultaneously (from the same data) and the possibility to utilize scattered radiation which, in the case of conventional x-ray tomography, is discarded. In this paper, we derive the star transform from physical principles, discuss its mathematical properties and analyze numerical stability of inversion. In particular, it is shown that stable inversion of the star transform can be obtained only for configurations involving odd number of rays. Several computationally-efficient inversion algorithms are derived and tested numerically. (paper)

On Poisson Nonlinear Transformations

Directory of Open Access Journals (Sweden)

Nasir Ganikhodjaev

2014-01-01

Full Text Available We construct the family of Poisson nonlinear transformations defined on the countable sample space of nonnegative integers and investigate their trajectory behavior. We have proved that these nonlinear transformations are regular.

Frequency and determinants for hemorrhagic transformation of posterior cerebral stroke : Posterior ischemic stroke and hemorrhagic transformation.

Science.gov (United States)

Valentino, Francesca; Gentile, Luana; Terruso, Valeria; Mastrilli, Sergio; Aridon, Paolo; Ragonese, Paolo; Sarno, Caterina; Savettieri, Giovanni; D'Amelio, Marco

2017-11-13

hemorrhagic transformation is a threatening ischemic stroke complication. Frequency of hemorrhagic transformation differs greatly among studies, and its risk factors have been usually studied in patients with anterior ischemic stroke who received thrombolytic therapy. We evaluated, in a hospital-based series of patients with posterior ischemic stroke not treated with thrombolysis, frequency and risk factors of hemorrhagic transformation. Patients with posterior circulation stroke were seen in our Department during the period January 2004 to December 2009. Demographic and clinical information were collected. We estimated risk for spontaneous hemorrhagic transformation by means of uni- and multivariate logistic regression analyses. 119 consecutive patients were included (73 males, 61.3%). Hemorrhagic transformation was observed in 7 patients (5.9%). Only clinical worsening was significantly associated with hemorrhagic transformation (OR 6.8, 95% CI 1.3-34.5). Our findings indicate that patients with posterior have a low risk of spontaneous hemorrhagic transformation, suggesting that these patients might have greater advantage from intravenous thrombolysis.

Transformation on Abandonment

DEFF Research Database (Denmark)

Krag, Mo Michelsen Stochholm

2017-01-01

in an attempt to sway the residents’ attitude towards a more nuanced view on ruins, thus influencing the public discourse on rural transformation. The residents’ responses are considered a significant impact indicator, supplementary to the physical transformations themselves. As such, the responses of the local...... in the process of provoking an exchange of memories of buildings and places among the residents in rural villages. Today’s state authorized funds for demolition projects, if redirected, could easily contribute to the on-going rural transformation through integration into radical preservation strategies. Instead......-practice indicates that this anxiety may not be legitimate. Time, when stretched in a ruination process or prolonged demolition, acts similarly to a mourning process, thus creating an exchange of memories of what is lost....

Roadmap on transformation optics

Science.gov (United States)

McCall, Martin; Pendry, John B.; Galdi, Vincenzo; Lai, Yun; Horsley, S. A. R.; Li, Jensen; Zhu, Jian; Mitchell-Thomas, Rhiannon C.; Quevedo-Teruel, Oscar; Tassin, Philippe; Ginis, Vincent; Martini, Enrica; Minatti, Gabriele; Maci, Stefano; Ebrahimpouri, Mahsa; Hao, Yang; Kinsler, Paul; Gratus, Jonathan; Lukens, Joseph M.; Weiner, Andrew M.; Leonhardt, Ulf; Smolyaninov, Igor I.; Smolyaninova, Vera N.; Thompson, Robert T.; Wegener, Martin; Kadic, Muamer; Cummer, Steven A.

2018-06-01

Transformation optics asks, using Maxwell’s equations, what kind of electromagnetic medium recreates some smooth deformation of space? The guiding principle is Einstein’s principle of covariance: that any physical theory must take the same form in any coordinate system. This requirement fixes very precisely the required electromagnetic medium. The impact of this insight cannot be overestimated. Many practitioners were used to thinking that only a few analytic solutions to Maxwell’s equations existed, such as the monochromatic plane wave in a homogeneous, isotropic medium. At a stroke, transformation optics increases that landscape from ‘few’ to ‘infinity’, and to each of the infinitude of analytic solutions dreamt up by the researcher, there corresponds an electromagnetic medium capable of reproducing that solution precisely. The most striking example is the electromagnetic cloak, thought to be an unreachable dream of science fiction writers, but realised in the laboratory a few months after the papers proposing the possibility were published. But the practical challenges are considerable, requiring meta-media that are at once electrically and magnetically inhomogeneous and anisotropic. How far have we come since the first demonstrations over a decade ago? And what does the future hold? If the wizardry of perfect macroscopic optical invisibility still eludes us in practice, then what compromises still enable us to create interesting, useful, devices? While three-dimensional (3D) cloaking remains a significant technical challenge, much progress has been made in two dimensions. Carpet cloaking, wherein an object is hidden under a surface that appears optically flat, relaxes the constraints of extreme electromagnetic parameters. Surface wave cloaking guides sub-wavelength surface waves, making uneven surfaces appear flat. Two dimensions is also the setting in which conformal and complex coordinate transformations are realisable, and the possibilities in

The CITEQ transformer: a proven technology

International Nuclear Information System (INIS)

Cordeau, P.

1997-01-01

The technology of the new transformer created by CITEQ (Centre d''innovation sur le transport d''energie du Quebec) was reviewed. The new transformer is a combination of four components: (1) a solid insulation system, (2) an exterior shell composed of composite material, (3) an internal cooling system using heat-pipe technology, and (4) a resistant material for the protection of the magnetic core. The CITEQ transformer differs from conventional transformers by virtue of its low risk of pollution and explosion. Maintenance for the new transformer has also been drastically reduced. The new transformer is immune to explosions because it is entirely composed of solid material. 2 figs

Level Design as Model Transformation

NARCIS (Netherlands)

Dormans, Joris

2011-01-01

This paper frames the process of designing a level in a game as a series of model transformations. The transformations correspond to the application of particular design principles, such as the use of locks and keys to transform a linear mission into a branching space. It shows that by using rewrite

Quality as Transformation: Educational Metamorphosis

Science.gov (United States)

Cheng, Ming

2014-01-01

The notion of "quality as transformation" has been widely used in the higher education sector. However, both quality and transformation are elusive terms. There is little research exploring how quality could be equated to transformation in the learning process. This paper will provide an insight into the relationship between quality and…

Efficient Plastid Transformation in Arabidopsis.

Science.gov (United States)

Yu, Qiguo; Lutz, Kerry Ann; Maliga, Pal

2017-09-01

Plastid transformation is routine in tobacco ( Nicotiana tabacum ) but 100-fold less frequent in Arabidopsis ( Arabidopsis thaliana ), preventing its use in plastid biology. A recent study revealed that null mutations in ACC2 , encoding a plastid-targeted acetyl-coenzyme A carboxylase, cause hypersensitivity to spectinomycin. We hypothesized that plastid transformation efficiency should increase in the acc2 background, because when ACC2 is absent, fatty acid biosynthesis becomes dependent on translation of the plastid-encoded ACC β-carboxylase subunit. We bombarded ACC2 -defective Arabidopsis leaves with a vector carrying a selectable spectinomycin resistance ( aadA ) gene and gfp , encoding the green fluorescence protein GFP. Spectinomycin-resistant clones were identified as green cell clusters on a spectinomycin medium. Plastid transformation was confirmed by GFP accumulation from the second open reading frame of a polycistronic messenger RNA, which would not be translated in the cytoplasm. We obtained one to two plastid transformation events per bombarded sample in spectinomycin-hypersensitive Slavice and Columbia acc2 knockout backgrounds, an approximately 100-fold enhanced plastid transformation frequency. Slavice and Columbia are accessions in which plant regeneration is uncharacterized or difficult to obtain. A practical system for Arabidopsis plastid transformation will be obtained by creating an ACC2 null background in a regenerable Arabidopsis accession. The recognition that the duplicated ACCase in Arabidopsis is an impediment to plastid transformation provides a rational template to implement plastid transformation in related recalcitrant crops. © 2017 American Society of Plant Biologists. All Rights Reserved.

Development of Toroidal Core Transformers

Energy Technology Data Exchange (ETDEWEB)

de Leon, Francisco [New York Univ. (NYU), Brooklyn, NY (United States). Dept. of Electrical and Computer Engineering

2014-08-01

The original objective of this project was to design, build and test a few prototypes of single-phase dry-type distribution transformers of 25 kVA, 2.4 kV primary to 120 V transformers using cores made of a continuous steel strip shaped like a doughnut (toroid). At different points during the development of the project, the scope was enhanced to include the more practical case of a 25 kVA transformer for a 13.8 kV primary system voltage. Later, the scope was further expanded to design and build a 50 kVA unit to transformer voltage from 7.62 kV to 2x120 V. This is a common transformer used by Con Edison of New York and they are willing to test it in the field. The project officially started in September 2009 and ended in May 2014. The progress was reported periodically to DOE in eighteen quarterly reports. A Continuation Application was submitted to DOE in June 2010. In May 2011 we have requested a non-cost extension of the project. In December 2011, the Statement of Project Objectives (SOPO) was updated to reflect the real conditions and situation of the project as of 2011. A second Continuation Application was made and funding was approved in 2013 by DOE and the end date was extended to May 2014. The technical challenges that were overcome in this project include: the development of the technology to pass the impulse tests, derive a model for the thermal performance, produce a sound mechanical design, and estimate the inrush current. However, the greatest challenge that we faced during the development of the project was the complications of procuring the necessary parts and materials to build the transformers. The actual manufacturing process is relatively fast, but getting all parts together is a very lengthy process. The main products of this project are two prototypes of toroidal distribution transformers of 7.62 kV (to be used in a 13.8 kV system) to 2x120 V secondary (standard utilization voltage); one is rated at 25 kVA and the other at 50 kVA. The 25 k

Equations For Rotary Transformers

Science.gov (United States)

Salomon, Phil M.; Wiktor, Peter J.; Marchetto, Carl A.

1988-01-01

Equations derived for input impedance, input power, and ratio of secondary current to primary current of rotary transformer. Used for quick analysis of transformer designs. Circuit model commonly used in textbooks on theory of ac circuits.

3-D Discrete Analytical Ridgelet Transform

OpenAIRE

Helbert , David; Carré , Philippe; Andrès , Éric

2006-01-01

International audience; In this paper, we propose an implementation of the 3-D Ridgelet transform: the 3-D discrete analytical Ridgelet transform (3-D DART). This transform uses the Fourier strategy for the computation of the associated 3-D discrete Radon transform. The innovative step is the definition of a discrete 3-D transform with the discrete analytical geometry theory by the construction of 3-D discrete analytical lines in the Fourier domain. We propose two types of 3-D discrete lines:...

Broadband Planar 5:1 Impedence Transformer

Science.gov (United States)

Ehsan, Negar; Hsieh, Wen-Ting; Moseley, Samuel H.; Wollack, Edward J.

2015-01-01

This paper presents a broadband Guanella-type planar impedance transformer that transforms so 50 omega to 10 omega with a 10 dB bandwidth of 1-14GHz. The transformer is designed on a flexible 50 micrometer thick polyimide substrate in microstrip and parallel-plate transmission line topologies, and is Inspired by the traditional 4:1 Guanella transformer. Back-to-back transformers were designed and fabricated for characterization in a 50 omega system. Simulated and measured results are in excellent agreement.

A Unified Method of Finding Laplace Transforms, Fourier Transforms, and Fourier Series. [and] An Inversion Method for Laplace Transforms, Fourier Transforms, and Fourier Series. Integral Transforms and Series Expansions. Modules and Monographs in Undergraduate Mathematics and Its Applications Project. UMAP Units 324 and 325.

Science.gov (United States)

Grimm, C. A.

This document contains two units that examine integral transforms and series expansions. In the first module, the user is expected to learn how to use the unified method presented to obtain Laplace transforms, Fourier transforms, complex Fourier series, real Fourier series, and half-range sine series for given piecewise continuous functions. In…

Laplace Transforms without Integration

Science.gov (United States)

Robertson, Robert L.

2017-01-01

Calculating Laplace transforms from the definition often requires tedious integrations. This paper provides an integration-free technique for calculating Laplace transforms of many familiar functions. It also shows how the technique can be applied to probability theory.

Aerobic activated sludge transformation of vincristine and identification of the transformation products.

Science.gov (United States)

Kosjek, Tina; Negreira, Noelia; Heath, Ester; López de Alda, Miren; Barceló, Damià

2018-01-01

This study aims to identify (bio)transformation products of vincristine, a plant alkaloid chemotherapy drug. A batch biotransformation experiment was set-up using activated sludge at two concentration levels with and without the addition of a carbon source. Sample analysis was performed on an ultra-high performance liquid chromatograph coupled to a high-resolution hybrid quadrupole-Orbitrap tandem mass spectrometer. To identify molecular ions of vincristine transformation products and to propose molecular and chemical structures, we performed data-dependent acquisition experiments combining full-scan mass spectrometry data with product ion spectra. In addition, the use of non-commercial detection and prediction algorithms such as MZmine 2 and EAWAG-BBD Pathway Prediction System, was proven to be proficient for screening for transformation products in complex wastewater matrix total ion chromatograms. In this study eleven vincristine transformation products were detected, nine of which were tentatively identified. Copyright © 2017 Elsevier B.V. All rights reserved.

CRISPR/Cas9-Assisted Transformation-Efficient Reaction (CRATER) for Near-Perfect Selective Transformation

Science.gov (United States)

Rothschild, Lynn J.; Greenberg, Daniel T.; Takahashi, Jack R.; Thompson, Kirsten A.; Maheshwari, Akshay J.; Kent, Ryan E.; McCutcheon, Griffin; Shih, Joseph D.; Calvet, Charles; Devlin, Tyler D.;

Piezoelectric Transformers: An Historical Review

Directory of Open Access Journals (Sweden)

Alfredo Vazquez Carazo

2016-04-01

Full Text Available Piezoelectric transformers (PTs are solid-state devices that transform electrical energy into electrical energy by means of a mechanical vibration. These devices are manufactured using piezoelectric materials that are driven at resonance. With appropriate design and circuitry, it is possible to step up and step down the voltages between the input and output sections of the piezoelectric transformer, without making use of magnetic materials and obtaining excellent conversion efficiencies. The initial concept of a piezoelectric ceramic transformer was proposed by Charles A. Rosen in 1954. Since then, the evolution of piezoelectric transformers through history has been linked to the relevant work of some excellent researchers as well as to the evolution in materials, manufacturing processes, and driving circuit techniques. This paper summarizes the historical evolution of the technology.

Rainbow Fourier Transform

Science.gov (United States)

Alexandrov, Mikhail D.; Cairns, Brian; Mishchenko, Michael I.

2012-01-01

We present a novel technique for remote sensing of cloud droplet size distributions. Polarized reflectances in the scattering angle range between 135deg and 165deg exhibit a sharply defined rainbow structure, the shape of which is determined mostly by single scattering properties of cloud particles, and therefore, can be modeled using the Mie theory. Fitting the observed rainbow with such a model (computed for a parameterized family of particle size distributions) has been used for cloud droplet size retrievals. We discovered that the relationship between the rainbow structures and the corresponding particle size distributions is deeper than it had been commonly understood. In fact, the Mie theory-derived polarized reflectance as a function of reduced scattering angle (in the rainbow angular range) and the (monodisperse) particle radius appears to be a proxy to a kernel of an integral transform (similar to the sine Fourier transform on the positive semi-axis). This approach, called the rainbow Fourier transform (RFT), allows us to accurately retrieve the shape of the droplet size distribution by the application of the corresponding inverse transform to the observed polarized rainbow. While the basis functions of the proxy-transform are not exactly orthogonal in the finite angular range, this procedure needs to be complemented by a simple regression technique, which removes the retrieval artifacts. This non-parametric approach does not require any a priori knowledge of the droplet size distribution functional shape and is computationally fast (no look-up tables, no fitting, computations are the same as for the forward modeling).

Distributional Watson transforms

NARCIS (Netherlands)

Dijksma, A.; Snoo, H.S.V. de

1974-01-01

For all Watson transforms W in L2(R+) a triple of Hilbert space LG ⊂ L2(R+) ⊂ L'G is constructed such that W may be extended to L'G. These results allow the construction of a triple L ⊂ L2(R+) ⊂ L', where L is a Gelfand-Fréchet space. This leads to a theory of distributional Watson transforms.

Stereo matching using epipolar distance transform.

Science.gov (United States)

Yang, Qingxiong; Ahuja, Narendra

2012-10-01

In this paper, we propose a simple but effective image transform, called the epipolar distance transform, for matching low-texture regions. It converts image intensity values to a relative location inside a planar segment along the epipolar line, such that pixels in the low-texture regions become distinguishable. We theoretically prove that the transform is affine invariant, thus the transformed images can be directly used for stereo matching. Any existing stereo algorithms can be directly used with the transformed images to improve reconstruction accuracy for low-texture regions. Results on real indoor and outdoor images demonstrate the effectiveness of the proposed transform for matching low-texture regions, keypoint detection, and description for low-texture scenes. Our experimental results on Middlebury images also demonstrate the robustness of our transform for highly textured scenes. The proposed transform has a great advantage, its low computational complexity. It was tested on a MacBook Air laptop computer with a 1.8 GHz Core i7 processor, with a speed of about 9 frames per second for a video graphics array-sized image.

Martensitic transformation in zirconia

International Nuclear Information System (INIS)

Deville, Sylvain; Guenin, Gerard; Chevalier, Jerome

2004-01-01

We investigate by atomic force microscopy (AFM) the surface relief resulting from martensitic tetragonal to monoclinic phase transformation induced by low temperature autoclave aging in ceria-stabilized zirconia. AFM appears as a very powerful tool to investigate martensite relief quantitatively and with a great precision. The crystallographic phenomenological theory is used to predict the expected relief induced by the transformation, for the particular case of lattice correspondence ABC1, where tetragonal c axis becomes the monoclinic c axis. A model for variants spatial arrangement for this lattice correspondence is proposed and validated by the experimental observations. An excellent agreement is found between the quantitative calculations outputs and the experimental measurements at nanometer scale yielded by AFM. All the observed features are explained fully quantitatively by the calculations, with discrepancies between calculations and quantitative experimental measurements within the measurements and calculations precision range. In particular, the crystallographic orientation of the transformed grains is determined from the local characteristics of transformation induced relief. It is finally demonstrated that the strain energy is the controlling factor of the surface transformation induced by low temperature autoclave treatments in this material

On numerical Bessel transformation

International Nuclear Information System (INIS)

Sommer, B.; Zabolitzky, J.G.

1979-01-01

The authors present a computer program to calculate the three dimensional Fourier or Bessel transforms and definite integrals with Bessel functions. Numerical integration of systems containing Bessel functions occurs in many physical problems, e.g. electromagnetic form factor of nuclei, all transitions involving multipole expansions at high momenta. Filon's integration rule is extended to spherical Bessel functions. The numerical error is of the order of the Simpson error term of the function which has to be transformed. Thus one gets a stable integral even at large arguments of the transformed function. (Auth.)

Transforming Consumers Into Brands

DEFF Research Database (Denmark)

Erz, Antonia; Christensen, Anna-Bertha Heeris

2018-01-01

The goal of this research is to explore the transformational power of a new consumption and production practice, the practice of blogging, to understand its impact on consumers' identity transformations beyond their self-concept as consumers and on the blogosphere as an organizational field....... Through an exploratory study of over 12,000 blog posts from five fashion bloggers, complemented by in-depth interviews, we trace the transformation of consumer bloggers. We identify and describe three identity phases, the individual consumer, collective blogger and blogger identity phase, and two...

Biolistics Transformation of Wheat

Science.gov (United States)

Sparks, Caroline A.; Jones, Huw D.

We present a complete, step-by-step guide to the production of transformed wheat plants using a particle bombardment device to deliver plasmid DNA into immature embryos and the regeneration of transgenic plants via somatic embryogenesis. Currently, this is the most commonly used method for transforming wheat and it offers some advantages. However, it will be interesting to see whether this position is challenged as facile methods are developed for delivering DNA by Agrobacterium tumefaciens or by the production of transformants via a germ-line process (see other chapters in this book).

Progress in planta transformation without tissue culture

International Nuclear Information System (INIS)

Gu Yunhong; Chinese Academy of Sciences, Hefei; Qin Guangyong; Huo Yuping; Yu Zengliang

2004-01-01

With the development of planta genetic engineering, more emphases have been laid on convenient and high efficient genetic transformation methods. And transformation without tissue culture is a prospective direction of it. In this paper, traditional transformation methods and the methods of non-tissue culture were summarized. With the exploration and application of Arabidopsis transformation mechanism, with the use of ion beam-mediated transformation invented by Chinese scientists and the development of other transformation methods, transformation methods without tissue culture and planta genetic engineering could be improved rapidly. (authors)

Genetic Transformation of Streptococcus mutans

OpenAIRE

Perry, Dennis; Kuramitsu, Howard K.

1981-01-01

Three strains of Streptococcus mutans belonging to serotypes a, c, and f were transformed to streptomycin resistance by deoxyribonucleic acids derived from homologous and heterologous streptomycin-resistant strains of S. mutans and Streptococcus sanguis strain Challis. Homologous transformation of S. mutans was less efficient than heterologous transformation by deoxyribonucleic acids from other strains of S. mutans.

Realization of quantum Fourier transform over ZN

International Nuclear Information System (INIS)

Fu Xiang-Qun; Bao Wan-Su; Li Fa-Da; Zhang Yu-Chao

2014-01-01

Since the difficulty in preparing the equal superposition state of amplitude is 1/√N, we construct a quantile transform of quantum Fourier transform (QFT) over Z N based on the elementary transforms, such as Hadamard transform and Pauli transform. The QFT over Z N can then be realized by the quantile transform, and used to further design its quantum circuit and analyze the requirements for the quantum register and quantum gates. However, the transform needs considerable quantum computational resources and it is difficult to construct a high-dimensional quantum register. Hence, we investigate the design of t-bit quantile transform, and introduce the definition of t-bit semiclassical QFT over Z N . According to probability amplitude, we prove that the transform can be used to realize QFT over Z N and further design its quantum circuit. For this transform, the requirements for the quantum register, the one-qubit gate, and two-qubit gate reduce obviously when compared with those for the QFT over Z N . (general)

Test-driven verification/validation of model transformations

Institute of Scientific and Technical Information of China (English)

László LENGYEL; Hassan CHARAF

2015-01-01

Why is it important to verify/validate model transformations? The motivation is to improve the quality of the trans-formations, and therefore the quality of the generated software artifacts. Verified/validated model transformations make it possible to ensure certain properties of the generated software artifacts. In this way, verification/validation methods can guarantee different requirements stated by the actual domain against the generated/modified/optimized software products. For example, a verified/ validated model transformation can ensure the preservation of certain properties during the model-to-model transformation. This paper emphasizes the necessity of methods that make model transformation verified/validated, discusses the different scenarios of model transformation verification and validation, and introduces the principles of a novel test-driven method for verifying/ validating model transformations. We provide a solution that makes it possible to automatically generate test input models for model transformations. Furthermore, we collect and discuss the actual open issues in the field of verification/validation of model transformations.

State Space identification of Civil Engineering Structures from Output Measurements

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Andersen, P.

for identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated techniques give good results in terms of estimated modal parameters and mode shapes. Especially...

State Space identification of Civil Engineering Structures from Output Measurements

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Andersen, P.

1997-01-01

for identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated techniques give good results in terms of estimated modal parameters and mode shapes. Especially...

A new characterization of Bloch function in the unit ball of Cn

International Nuclear Information System (INIS)

Shi Jihuai.

1989-07-01

Bloch function in the unit disc v has many different but equivalent characterizations. Recently, a new characterization has been obtained by the study of Hankel operators. The purpose of this note is to generalize this characterization to the unit ball of C n . 7 refs

Fast Unitary Transforms - Benefits and Restrictions.

Science.gov (United States)

1980-04-01

transformation kernel, and u assumes values in the range 0, 1, ... , N-i. Similarly, the inverse transform is given by the relation N-1 f(x) E T(u)h(x...function to obtain T(u,v). Similar comments hold for the inverse transform if h(x,y,u,v) is separable. If the kernel g(xy,u,v) is separable and symmetric...the forward transform can be used directly to obtain the inverse transform simply by multiplying the result of the algorithm by N. 12 The forward and

7 CFR 2902.20 - Fluid-filled transformers.

Science.gov (United States)

2010-01-01

... transformers. Electric power transformers that are designed to utilize a synthetic ester-based dielectric (non... transformers. Electric power transformers that are designed to utilize a vegetable oil-based dielectric (non... 7 Agriculture 15 2010-01-01 2010-01-01 false Fluid-filled transformers. 2902.20 Section 2902.20...

Wavelet Transforms using VTK-m

Energy Technology Data Exchange (ETDEWEB)

Li, Shaomeng [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sewell, Christopher Meyer [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-09-27

These are a set of slides that deal with the topics of wavelet transforms using VTK-m. First, wavelets are discussed and detailed, then VTK-m is discussed and detailed, then wavelets and VTK-m are looked at from a performance comparison, then from an accuracy comparison, and finally lessons learned, conclusion, and what is next. Lessons learned are the following: Launching worklets is expensive; Natural logic of performing 2D wavelet transform: Repeat the same 1D wavelet transform on every row, repeat the same 1D wavelet transform on every column, invoke the 1D wavelet worklet every time: num_rows x num_columns; VTK-m approach of performing 2D wavelet transform: Create a worklet for 2D that handles both rows and columns, invoke this new worklet only one time; Fast calculation, but cannot reuse 1D implementations.

WAVELET TRANSFORM AND LIP MODEL

Directory of Open Access Journals (Sweden)

Guy Courbebaisse

2011-05-01

Full Text Available The Fourier transform is well suited to the study of stationary functions. Yet, it is superseded by the Wavelet transform for the powerful characterizations of function features such as singularities. On the other hand, the LIP (Logarithmic Image Processing model is a mathematical framework developed by Jourlin and Pinoli, dedicated to the representation and processing of gray tones images called hereafter logarithmic images. This mathematically well defined model, comprising a Fourier Transform "of its own", provides an effective tool for the representation of images obtained by transmitted light, such as microscope images. This paper presents a Wavelet transform within the LIP framework, with preservation of the classical Wavelet Transform properties. We show that the fast computation algorithm due to Mallat can be easily used. An application is given for the detection of crests.

A First-Order One-Pass CPS Transformation

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse Reichstein

2001-01-01

We present a new transformation of λ-terms into continuation-passing style (CPS). This transformation operates in one pass and is both compositional and first-order. Previous CPS transformations only enjoyed two out of the three properties of being first-order, one-pass, and compositional......, but the new transformation enjoys all three properties. It is proved correct directly by structural induction over source terms instead of indirectly with a colon translation, as in Plotkin's original proof. Similarly, it makes it possible to reason about CPS-transformed terms by structural induction over...... source terms, directly.The new CPS transformation connects separately published approaches to the CPS transformation. It has already been used to state a new and simpler correctness proof of a direct-style transformation, and to develop a new and simpler CPS transformation of control-flow information....

A First-Order One-Pass CPS Transformation

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse Reichstein

2003-01-01

We present a new transformation of λ-terms into continuation-passing style (CPS). This transformation operates in one pass and is both compositional and first-order. Previous CPS transformations only enjoyed two out of the three properties of being first-order, one-pass, and compositional......, but the new transformation enjoys all three properties. It is proved correct directly by structural induction over source terms instead of indirectly with a colon translation, as in Plotkin's original proof. Similarly, it makes it possible to reason about CPS-transformed terms by structural induction over...... source terms, directly.The new CPS transformation connects separately published approaches to the CPS transformation. It has already been used to state a new and simpler correctness proof of a direct-style transformation, and to develop a new and simpler CPS transformation of control-flow information....

APPLICATION OF NATURAL TRANSFORM IN CRYPTOGRAPHY

OpenAIRE

Chindhe, Anil Dhondiram; Kiwne, Sakharam

2017-01-01

Abstaract−The newly defined integral transform ”Natural transform” has many application in the field of science and engineering.In this paper we described the application of Natural transform to Cryptography.This provide the algorithm for cryptography in which we use the natural transform of the exponential function for encryption of the plain text and corresponding inverse natural transform for decryption

On an application of Laplace transforms

OpenAIRE

murat düz

2017-01-01

In this study, complex differential equations are solved using laplace transform. Firstly we seperate real and imaginer parts of equation. Thus from one unknown equation is obtained two unknown equation system. Later we obtain laplace transforms of real and imaginer parts of solutions using laplace transform. In the latest we obtain real and imaginer parts of solution using inverse laplace transform .

The coordinate transforming in geography information system

International Nuclear Information System (INIS)

Zhao Xiang; Chen Gang

2003-01-01

The coordinate transforming of geography information system includes two kinds of transforming, map projection and coordinate-transforming. This paper proposed a arithmetic of coordinate-transforming, it implement the transforming between the longitude-latitude coordinate and the screen coordinate and apply it in the GIS. The preferable effect was made. (authors)

Transformer Efficiency Assessment - Okinawa, Japan

Energy Technology Data Exchange (ETDEWEB)

Thomas L. Baldwin; Robert J. Turk; Kurt S. Myers; Jake P. Gentle; Jason W. Bush

2012-08-01

The US Army Engineering & Support Center, Huntsville (USAESCH), and the US Marine Corps Base (MCB), Okinawa, Japan retained Idaho National Laboratory (INL) to conduct a Transformer Efficiency Assessment of “key” transformers located at multiple military bases in Okinawa, Japan. The purpose of this assessment is to support the Marine Corps Base, Okinawa in evaluating medium voltage distribution transformers for potential efficiency upgrades. The original scope of work included the MCB providing actual transformer nameplate data, manufacturer’s factory test sheets, electrical system data (kWh), demand data (kWd), power factor data, and electricity cost data. Unfortunately, the MCB’s actual data is not available and therefore making it necessary to de-scope the original assessment. Note: Any similar nameplate data, photos of similar transformer nameplates, and basic electrical details from one-line drawings (provided by MCB) are not a replacement for actual load loss test data. It is recommended that load measurements are performed on the high and low sides of transformers to better quantify actual load losses, demand data, and power factor data. We also recommend that actual data, when available, be inserted by MCB Okinawa where assumptions have been made and then the LCC analysis updated. This report covers a generalized assessment of modern U.S. transformers in a three level efficiency category, Low-Level efficiency, Medium-Level efficiency, and High-Level efficiency.

Transformer Efficiency Assessment - Okinawa, Japan

Energy Technology Data Exchange (ETDEWEB)

Thomas L. Baldwin; Robert J. Turk; Kurt S. Myers; Jake P. Gentle; Jason W. Bush

2012-05-01

The US Army Engineering & Support Center, Huntsville (USAESCH), and the US Marine Corps Base (MCB), Okinawa, Japan retained Idaho National Laboratory (INL) to conduct a Transformer Efficiency Assessment of “key” transformers located at multiple military bases in Okinawa, Japan. The purpose of this assessment is to support the Marine Corps Base, Okinawa in evaluating medium voltage distribution transformers for potential efficiency upgrades. The original scope of work included the MCB providing actual transformer nameplate data, manufacturer’s factory test sheets, electrical system data (kWh), demand data (kWd), power factor data, and electricity cost data. Unfortunately, the MCB’s actual data is not available and therefore making it necessary to de-scope the original assessment. Note: Any similar nameplate data, photos of similar transformer nameplates, and basic electrical details from one-line drawings (provided by MCB) are not a replacement for actual load loss test data. It is recommended that load measurements are performed on the high and low sides of transformers to better quantify actual load losses, demand data, and power factor data. We also recommend that actual data, when available, be inserted by MCB Okinawa where assumptions have been made and then the LCC analysis updated. This report covers a generalized assessment of modern U.S. transformers in a three level efficiency category, Low-Level efficiency, Medium-Level efficiency, and High-Level efficiency.

Maser-like transformations using the lie transform

International Nuclear Information System (INIS)

Michelotti, L.

1985-01-01

The Deprit-Hori-Kamel recursive algorithm is presented for carrying out canonical transformations that eliminate non-secular terms of a Hamiltonian. The method is illustrated in the context of accelerator theory by application to three sample problems. (author)

Genetic Transformation of Bacteria.

Science.gov (United States)

Moss, Robert.

1991-01-01

An activity in which students transform an ampicillin-sensitive strain of E. coli with a plasmid containing a gene for ampicillin resistance is described. The procedure for the preparation of competent cells and the transformation of competent E. coli is provided. (KR)

On an integral transform

Directory of Open Access Journals (Sweden)

D. Naylor

1986-01-01

Full Text Available This paper establishes properties of a convolution type integral transform whose kernel is a Macdonald type Bessel function of zero order. An inversion formula is developed and the transform is applied to obtain the solution of some related integral equations.

Transformed number states from a generalized Bogoliubov transformation and their relationships to the eigenstates of the Kossakowski-Lindblad equation

International Nuclear Information System (INIS)

Tay, B A

2011-01-01

We use a generalized Bogoliubov transformation to construct a set of transformed occupation number states of the harmonic oscillator in the Liouville space. General expressions for the expansion coefficients of these states in the bare number basis are obtained and the properties of these states investigated. The transformation is non-dynamical in nature and divides the transformed basis into disconnected correlation subspaces under the transformation. The basis is complete and orthonormal. Elements of the basis are in general mixed states, and the state with the lowest number indices is the thermal vacuum. Since the Kossakowski-Lindblad (KL) equation remains form invariant under the same transformation, the transformation parameter can be identified to the thermal parameter of the master equation. The transformed states then acquire thermal property through this connection. We also work out the explicit expressions of the transformation matrices between the transformed states and the eigenstates of the KL equation for different temperatures.

A new twist to fourier transforms

CERN Document Server

Meikle, Hamish D

2004-01-01

Making use of the inherent helix in the Fourier transform expression, this book illustrates both Fourier transforms and their properties in the round. The author draws on elementary complex algebra to manipulate the transforms, presenting the ideas in such a way as to avoid pages of complicated mathematics. Similarly, abbreviations are not used throughout and the language is kept deliberately clear so that the result is a text that is accessible to a much wider readership.The treatment is extended with the use of sampled data to finite and discrete transforms, the fast Fourier transform, or FFT, being a special case of a discrete transform. The application of Fourier transforms in statistics is illustrated for the first time using the examples operational research and later radar detection. In addition, a whole chapter on tapering or weighting functions is added for reference. The whole is rounded off by a glossary and examples of diagrams in three dimensions made possible by today's mathematics programs

Fourier Transform Mass Spectrometry

Science.gov (United States)

Scigelova, Michaela; Hornshaw, Martin; Giannakopulos, Anastassios; Makarov, Alexander

2011-01-01

This article provides an introduction to Fourier transform-based mass spectrometry. The key performance characteristics of Fourier transform-based mass spectrometry, mass accuracy and resolution, are presented in the view of how they impact the interpretation of measurements in proteomic applications. The theory and principles of operation of two types of mass analyzer, Fourier transform ion cyclotron resonance and Orbitrap, are described. Major benefits as well as limitations of Fourier transform-based mass spectrometry technology are discussed in the context of practical sample analysis, and illustrated with examples included as figures in this text and in the accompanying slide set. Comparisons highlighting the performance differences between the two mass analyzers are made where deemed useful in assisting the user with choosing the most appropriate technology for an application. Recent developments of these high-performing mass spectrometers are mentioned to provide a future outlook. PMID:21742802

Exponential x-ray transform

International Nuclear Information System (INIS)

Hazou, I.A.

1986-01-01

In emission computed tomography one wants to determine the location and intensity of radiation emitted by sources in the presence of an attenuating medium. If the attenuation is known everywhere and equals a constant α in a convex neighborhood of the support of f, then the problem reduces to that of inverting the exponential x-ray transform P/sub α/. The exponential x-ray transform P/sub μ/ with the attenuation μ variable, is of interest mathematically. For the exponential x-ray transform in two dimensions, it is shown that for a large class of approximate δ functions E, convolution kernels K exist for use in the convolution backprojection algorithm. For the case where the attenuation is constant, exact formulas are derived for calculating the convolution kernels from radial point spread functions. From these an exact inversion formula for the constantly attenuated transform is obtained

Target recognition by wavelet transform

International Nuclear Information System (INIS)

Li Zhengdong; He Wuliang; Zheng Xiaodong; Cheng Jiayuan; Peng Wen; Pei Chunlan; Song Chen

2002-01-01

Wavelet transform has an important character of multi-resolution power, which presents pyramid structure, and this character coincides the way by which people distinguish object from coarse to fineness and from large to tiny. In addition to it, wavelet transform benefits to reducing image noise, simplifying calculation, and embodying target image characteristic point. A method of target recognition by wavelet transform is provided

Scale transformation and massless limit in neutral-vector field theory. [Gauge transformation unified theory

Energy Technology Data Exchange (ETDEWEB)

Kubo, R; Takahashi, Y; Yokoyama, K

1975-01-01

In a wide class of neutral vector field theories, in which massive and massless fields are described in a unified way and a unique massless limit exists to quantum electrodynamics in covariant gauges, the commutability of the scale transformation and the massless limit is examined. It is shown that there occurs no anomaly with respect to the assignment for scale dimensions of relevant fields. Connection of scale transformation and gauge transformation is also discussed.

On transformation shear of precipitated zirconia particles

International Nuclear Information System (INIS)

Zhang, J.M.; Lam, K.Y.

1993-01-01

A model is proposed to investigate the transformation shear of the precipitated zirconia particles which undergo a stress-induced lattice transformation from tetragonal to monoclinic symmetry. Kinematically admissible twinning planes and the corresponding twinning elements are determined according to the continuum theory of dispacive phase transformation. It is postulated that only one twinning mode prevails in each transformed particle and that the minimization of elastic strain energy change dictates the morphology of the transformed variants. The transformation shear is determined by the twinning mode and the volume fraction of the corresponding variant. Numerical calculations show that each of the six kinematically admissible twinning modes may be kinematically favorable and therefore operate in constrained particle. The actual transformation shear in a transformed particle is shown to be dependent on the transformation stress, on the particle shape as well as on the lattice orientation relative to the principal axes of the ellipsoidal particle

Detecting Faults In High-Voltage Transformers

Science.gov (United States)

Blow, Raymond K.

1988-01-01

Simple fixture quickly shows whether high-voltage transformer has excessive voids in dielectric materials and whether high-voltage lead wires too close to transformer case. Fixture is "go/no-go" indicator; corona appears if transformer contains such faults. Nests in wire mesh supported by cap of clear epoxy. If transformer has defects, blue glow of corona appears in mesh and is seen through cap.

On an application of Laplace transforms

Directory of Open Access Journals (Sweden)

murat düz

2017-08-01

Full Text Available In this study, complex differential equations are solved using laplace transform. Firstly we seperate real and imaginer parts of equation. Thus from one unknown equation is obtained two unknown equation system. Later we obtain laplace transforms of real and imaginer parts of solutions using laplace transform. In the latest we obtain real and imaginer parts of solution using inverse laplace transform .

Status of superconducting power transformer development

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.C.; McConnell, B.W.; Mehta, S.P. [and others

1996-03-01

Development of the superconducting transformer is arguably the most difficult of the ac power applications of superconductivity - this is because of the need for very low ac losses, adequate fault and surge performance, and the rigors of the application environment. This paper briefly summarizes the history of superconducting transformer projects, reviews the key issues for superconducting transformers, and examines the status of HTS transformer development. Both 630-kVA, three-phase and 1-MVA single phase demonstration units are expected to operate in late 1996. Both efforts will further progress toward the development of economical and performance competitive superconducting transformers.

Quantum operations, state transformations and probabilities

International Nuclear Information System (INIS)

Chefles, Anthony

2002-01-01

In quantum operations, probabilities characterize both the degree of the success of a state transformation and, as density operator eigenvalues, the degree of mixedness of the final state. We give a unified treatment of pure→pure state transformations, covering both probabilistic and deterministic cases. We then discuss the role of majorization in describing the dynamics of mixing in quantum operations. The conditions for mixing enhancement for all initial states are derived. We show that mixing is monotonically decreasing for deterministic pure→pure transformations, and discuss the relationship between these transformations and deterministic local operations with classical communication entanglement transformations

Finite field dependent mixed BRST transformation

International Nuclear Information System (INIS)

Upadhyay, Sudhaker; Mandal, Bhabani Prasad

2013-01-01

Joglekar and Mandal have generalized the usual Bechhi-Rouet-Stora-Tyutin (BRST) transformation by allowing infinitesimal BRST parameter finite and field dependent. Such a generalized BRST transformation (so-called FFBRST transformation) is also the symmetry of the effective action but not of the generating functional of the theory. We generalize the mixed BRST (sum of totally anti-commuting BRST and anti-BRST) symmetry transformation in same manner. We show that such a generalized mixed BRST transformation is the symmetry of the effective action as well as of the generating functional. We show our result by considering several explicit examples. (author)

DYNAMICS MODEL OF MOISTURE IN PAPER INSULATION-TRANSFORMER OIL SYSTEM IN NON-STATIONARY THERMAL MODES OF THE POWER TRANSFORMER

Directory of Open Access Journals (Sweden)

V.V. Vasilevskij

2016-06-01

Full Text Available Introduction. An important problem in power transformers resource prognosis is the formation of moisture dynamics trends of transformer insulation. Purpose. Increasing the accuracy of power transformer insulation resource assessment based on accounting of moisture dynamics in interrelation with temperature dynamics. Working out of moisture dynamics model in paper insulation-transformer oil system in conjunction with thermodynamic model, load model and technical maintenance model. Methodology. The mathematical models used for describe the moisture dynamics are grounded on nonlinear differential equations. Interrelation moisture dynamics model with thermodynamic, load and technical maintenance models described by UML model. For confirming the adequacy of model used computer simulation. Results. We have implemented the model of moisture dynamics in power transformers insulation in interrelation with other models, which describe the state of power transformer in operation. The proposed model allows us to form detailed trends of moisture dynamics in power transformers insulation basing on monitoring data or power transformers operational factors simulation results. We have performed computer simulation of moisture exchange processes and calculation of transformer insulation resource for different moisture trends. Originality. The offered model takes into account moisture dynamics in power transformers insulation under the influence of changes of the power transformers thermal mode and operational factors. Practical value. The offered model can be used in power transformers monitoring systems for automation of resource assessment of oil-immersed power transformers paper insulation at different phase of lifecycle. Model also can be used for assessment of projected economic efficiency of power transformers exploitation in projected operating conditions.

Energy Transformation of Croatia

International Nuclear Information System (INIS)

Potocnik, V.

2014-01-01

Due to obvious climate change, caused mainly by combustion of the fossil fuels, as well as to their modest reserves, energy transformation is under way. It is the transition from the fossil fuels to improved energy efficiency (ENEF) and renewable energy sources (RES). Leading role in the energy transformation has Germany with 'Energiewende', which among other includes closing of existing nuclear power plants until 2022. Croatia has very limited proven fossil fuels reserves, which cover 3/4 of primary energy in consumption. Croatia also has large potential for improvements in ENEF and RES. Therefore, energy transformation of Croatia is justified. (author).

Ethical aspects of transformational leadership.

Science.gov (United States)

Cassidy, V R; Koroll, C J

1994-10-01

The requirements of leadership in the current environment of health care reform necessitate a clear distinction between leadership and management, an alteration in traditional leadership roles, and an evaluation of the knowledge and skills needed to address the ethical issues that arise from such reform. Transformational leadership is well suited to the current climate in health care because of the manner in which it actively embraces and encourages innovation and change. The article explores the elements of transformational leadership, describes the need for transformational leaders to be cognizant of the ethical aspects of their roles, and outlines the responsibilities of transformational leaders as moral agents.

Transform to Succeed: An Empirical Analysis of Digital Transformation in Firms

OpenAIRE

Sarah E. Stief; Anne Theresa Eidhoff; Markus Voeth

2016-01-01

Despite all progress firms are facing the increasing need to adapt and assimilate digital technologies to transform their business activities in order to pursue business development. By using new digital technologies, firms can implement major business improvements in order to stay competitive and foster new growth potentials. The corresponding phenomenon of digital transformation has received some attention in previous literature in respect to industries such as media and publishing. Neverth...

AUTOMATIC LOAD SHARING OF TRANSFORMERS USING MICROCONTROLLER

OpenAIRE

Vidhun M; Akshara Shanmughan; Liya Immanual; Sreelakshmi V G

2017-01-01

The transformer is a static device, which converts power from one level to another level. The aim of the project is to protect the transformer under overload condition by load sharing. Due to overload on transformer, the efficiency drops and windings get overheated and may get burnt. Thus by sharing load on transformer, the transformer is protected. This will be done by connecting another transformer in parallel through a micro-controller. The micro controller compares the load on the first t...

Transformation reactions in TOXSWA : transformation reactions of plant protection products in surface water

NARCIS (Netherlands)

Deneer, J.W.; Beltman, W.H.J.; Adriaanse, P.I.

2010-01-01

This report aims to give a general description of transformation processes for future use in the TOXSWA model. Hydrolysis, photolysis and biotic transformation are described as distinct processes, employing separate rate constants. Additionally, a way to introduce into TOXSWA the daily variation of

Scalar perturbations and conformal transformation

International Nuclear Information System (INIS)

Fabris, J.C.; Tossa, J.

1995-11-01

The non-minimal coupling of gravity to a scalar field can be transformed into a minimal coupling through a conformal transformation. We show how to connect the results of a perturbation calculation, performed around a Friedman-Robertson-Walker background solution, before and after the conformal transformation. We work in the synchronous gauge, but we discuss the implications of employing other frames. (author). 16 refs

Extreme non-linear elasticity and transformation optics

DEFF Research Database (Denmark)

Gersborg, Allan Roulund; Sigmund, Ole

2010-01-01

realizations correspond to minimizers of elastic energy potentials for extreme values of the mechanical Poisson's ratio ν . For TE (Hz) polarized light an incompressible transformation ν = 1/2 is ideal and for TM (E z) polarized light one should use a compressible transformation with negative Poissons's ratio......Transformation optics is a powerful concept for designing novel optical components such as high transmission waveguides and cloaking devices. The selection of specific transformations is a non-unique problem. Here we reveal that transformations which allow for all dielectric and broadband optical...... ν = -1. For the TM polarization the mechanical analogy corresponds to a modified Liao functional known from the transformation optics literature. Finally, the analogy between ideal transformations and solid mechanical material models automates and broadens the concept of transformation optics...

Geometric Transformations in Engineering Geometry

Directory of Open Access Journals (Sweden)

I. F. Borovikov

2015-01-01

Full Text Available Recently, for business purposes, in view of current trends and world experience in training engineers, research and faculty staff there has been a need to transform traditional courses of descriptive geometry into the course of engineering geometry in which the geometrical transformations have to become its main section. On the basis of critical analysis the paper gives suggestions to improve a presentation technique of this section both in the classroom and in academic literature, extend an application scope of geometrical transformations to solve the position and metric tasks and simulation of surfaces, as well as to design complex engineering configurations, which meet a number of pre-specified conditions.The article offers to make a number of considerable amendments to the terms and definitions used in the existing courses of descriptive geometry. It draws some conclusions and makes the appropriate proposals on feasibility of coordination in teaching the movement transformation in the courses of analytical and descriptive geometry. This will provide interdisciplinary team teaching and allow students to be convinced that a combination of analytical and graphic ways to solve geometric tasks is useful and reasonable.The traditional sections of learning courses need to be added with a theory of projective and bi-rational transformations. In terms of application simplicity and convenience it is enough to consider the central transformations when solving the applied tasks. These transformations contain a beam of sub-invariant (low-invariant straight lines on which the invariant curve induces non-involution and involution projectivities. The expediency of nonlinear transformations application is shown in the article by a specific example of geometric modeling of the interfacing surface "spar-blade".Implementation of these suggestions will contribute to a real transformation of a traditional course of descriptive geometry to the engineering geometry

Mechanisms of radiation-induced neoplastic cell transformation

Energy Technology Data Exchange (ETDEWEB)

Yang, T.C.H.; Tobias, C.A.

1984-04-01

Studies with cultured mammalian cells demonstrated clearly that radiation can transform cells directly and can enhance the cell transformation by oncogenic DNA viruses. In general, high-LET heavy-ion radiation can be more effective than X and gamma rays in inducing neoplastic cell transformation. Various experimental results indicate that radiation-induced DNA damage, most likely double-strand breaks, is important for both the initiation of cell transformation and for the enhancement of viral transformation. Some of the transformation and enhancement lesions can be repaired properly in the cell, and the amount of irrepairable lesions produced by a given dose depends on the quality of radiation. An inhibition of repair processes with chemical agents can increase the transformation frequency of cells exposed to radiation and/or oncogenic viruses, suggesting that repair mechanisms may play an important role in the radiation transformation. The progression of radiation-transformed cells appears to be a long and complicated process that can be modulated by some nonmutagenic chemical agents, e.g., DMSO. Normal cells can inhibit the expression of transforming properties of tumorigenic cells through an as yet unknown mechanism. The progression and expression of transformation may involve some epigenetic changes in the irradiated cells. 38 references, 15 figures, 1 table.

Mechanisms of radiation-induced neoplastic cell transformation

International Nuclear Information System (INIS)

Yang, T.C.H.; Tobias, C.A.

1984-04-01

Studies with cultured mammalian cells demonstrated clearly that radiation can transform cells directly and can enhance the cell transformation by oncogenic DNA viruses. In general, high-LET heavy-ion radiation can be more effective than X and gamma rays in inducing neoplastic cell transformation. Various experimental results indicate that radiation-induced DNA damage, most likely double-strand breaks, is important for both the initiation of cell transformation and for the enhancement of viral transformation. Some of the transformation and enhancement lesions can be repaired properly in the cell, and the amount of irrepairable lesions produced by a given dose depends on the quality of radiation. An inhibition of repair processes with chemical agents can increase the transformation frequency of cells exposed to radiation and/or oncogenic viruses, suggesting that repair mechanisms may play an important role in the radiation transformation. The progression of radiation-transformed cells appears to be a long and complicated process that can be modulated by some nonmutagenic chemical agents, e.g., DMSO. Normal cells can inhibit the expression of transforming properties of tumorigenic cells through an as yet unknown mechanism. The progression and expression of transformation may involve some epigenetic changes in the irradiated cells. 38 references, 15 figures, 1 table

A Selective CPS Transformation

DEFF Research Database (Denmark)

Nielsen, Lasse Riechstein

2001-01-01

characterize this involvement as a control effect and we present a selective CPS transformation that makes functions and expressions continuation-passing if they have a control effect, and that leaves the rest of the program in direct style. We formalize this selective CPS transformation with an operational...

Unitary transformations in solid state physics

International Nuclear Information System (INIS)

Wagner, M.

1986-01-01

The main emphasis of this book is on the practical application of unitary transformations to problems in solid state physics. This is a method used in the field of nonadiabatic electron-phonon phenomena where the Born-Oppenheimer approximation is no longer applicable. The book is intended as a tool for those who want to apply unitary transformations quickly and on a more elementary level and also for those who want to use this method for more involved problems. The book is divided into 6 chapters. The first three chapters are concerned with presenting quick applications of unitary transformations and chapter 4 presents a more systematic procedure. The last two chapters contain the major known examples of the utilization of unitary transformations in solid state physics, including such highlights as the Froehlich and the Fulton-Gouterman transformations. The book is supplemented by extended tables of unitary transformations, whose properties and peculiarities are also listed. This tabulated material is unique and will be of great practical use to those applying the method of unitary transformations in their work. (Auth.)

The linear canonical transformation : definition and properties

NARCIS (Netherlands)

Bastiaans, Martin J.; Alieva, Tatiana; Healy, J.J.; Kutay, M.A.; Ozaktas, H.M.; Sheridan, J.T.

2016-01-01

In this chapter we introduce the class of linear canonical transformations, which includes as particular cases the Fourier transformation (and its generalization: the fractional Fourier transformation), the Fresnel transformation, and magnifier, rotation and shearing operations. The basic properties

Fast Exact Euclidean Distance (FEED) Transformation

NARCIS (Netherlands)

Schouten, Theo; Kittler, J.; van den Broek, Egon; Petrou, M.; Nixon, M.

2004-01-01

Fast Exact Euclidean Distance (FEED) transformation is introduced, starting from the inverse of the distance transformation. The prohibitive computational cost of a naive implementation of traditional Euclidean Distance Transformation, is tackled by three operations: restriction of both the number

Feature Extraction Using the Hough Transform

OpenAIRE

Ferguson, Tara; Baker, Doran

2002-01-01

This paper contains a brief literature survey of applications and improvements of the Hough transform, a description of the Hough transform and a few of its algorithms, and simulation examples of line and curve detection using the Hough transform.

Piezoelectric Transformers: An Historical Review

OpenAIRE

Alfredo Vazquez Carazo

2016-01-01

Piezoelectric transformers (PTs) are solid-state devices that transform electrical energy into electrical energy by means of a mechanical vibration. These devices are manufactured using piezoelectric materials that are driven at resonance. With appropriate design and circuitry, it is possible to step up and step down the voltages between the input and output sections of the piezoelectric transformer, without making use of magnetic materials and obtaining excellent conversion efficiencies. The...

High resolution (transformers.

Science.gov (United States)

Garcia-Souto, Jose A; Lamela-Rivera, Horacio

2006-10-16

A novel fiber-optic interferometric sensor is presented for vibrations measurements and analysis. In this approach, it is shown applied to the vibrations of electrical structures within power transformers. A main feature of the sensor is that an unambiguous optical phase measurement is performed using the direct detection of the interferometer output, without external modulation, for a more compact and stable implementation. High resolution of the interferometric measurement is obtained with this technique (transformers are also highlighted.

Business process transformation

CERN Document Server

Grover, Varun

2015-01-01

Featuring contributions from prominent thinkers and researchers, this volume in the ""Advances in Management Information Systems"" series provides a rich set of conceptual, empirical, and introspective studies that epitomize fundamental knowledge in the area of Business Process Transformation. Processes are interpreted broadly to include operational and managerial processes within and between organizations, as well as those involved in knowledge generation. Transformation includes radical and incremental change, its conduct, management, and outcome. The editors and contributing authors pay clo

Convolution Theorem of Fractional Fourier Transformation Derived by Representation Transformation in Quantum Mechancis

International Nuclear Information System (INIS)

Fan Hongyi; Hao Ren; Lu Hailiang

2008-01-01

Based on our previous paper (Commun. Theor. Phys. 39 (2003) 417) we derive the convolution theorem of fractional Fourier transformation in the context of quantum mechanics, which seems a convenient and neat way. Generalization of this method to the complex fractional Fourier transformation case is also possible

Transformers: analysis, design, and measurement

National Research Council Canada - National Science Library

López-Fernández, Xose M; Ertan, H. Bülent; Turowski, J

2013-01-01

"This book focuses on contemporary economic, design, diagnostics, and maintenance aspects of power, instrument, and high frequency transformers, which are critical to designers for a transformer stations...

A Transformation Called "Twist"

Science.gov (United States)

Hwang, Daniel

2010-01-01

The transformations found in secondary mathematics curriculum are typically limited to stretches and translations (e.g., ACARA, 2010). Advanced students may find the transformation, twist, to be of further interest. As most available resources are written for professional-level readers, this article is intended to be an introduction accessible to…

Acoustic cloaking and transformation acoustics

International Nuclear Information System (INIS)

Chen Huanyang; Chan, C T

2010-01-01

In this review, we give a brief introduction to the application of the new technique of transformation acoustics, which draws on a correspondence between coordinate transformation and material properties. The technique is formulated for both acoustic waves and linear liquid surface waves. Some interesting conceptual devices can be designed for manipulating acoustic waves. For example, we can design acoustic cloaks that make an object invisible to acoustic waves, and the cloak can either encompass or lie outside the object to be concealed. Transformation acoustics, as an analog of transformation optics, can go beyond invisibility cloaking. As an illustration for manipulating linear liquid surface waves, we show that a liquid wave rotator can be designed and fabricated to rotate the wave front. The acoustic transformation media require acoustic materials which are anisotropic and inhomogeneous. Such materials are difficult to find in nature. However, composite materials with embedded sub-wavelength resonators can in principle be made and such 'acoustic metamaterials' can exhibit nearly arbitrary values of effective density and modulus tensors to satisfy the demanding material requirements in transformation acoustics. We introduce resonant sonic materials and Helmholtz resonators as examples of acoustic metamaterials that exhibit resonant behaviour in effective density and effective modulus. (topical review)

Biomolecular surface construction by PDE transform.

Science.gov (United States)

Zheng, Qiong; Yang, Siyang; Wei, Guo-Wei

2012-03-01

This work proposes a new framework for the surface generation based on the partial differential equation (PDE) transform. The PDE transform has recently been introduced as a general approach for the mode decomposition of images, signals, and data. It relies on the use of arbitrarily high-order PDEs to achieve the time-frequency localization, control the spectral distribution, and regulate the spatial resolution. The present work provides a new variational derivation of high-order PDE transforms. The fast Fourier transform is utilized to accomplish the PDE transform so as to avoid stringent stability constraints in solving high-order PDEs. As a consequence, the time integration of high-order PDEs can be done efficiently with the fast Fourier transform. The present approach is validated with a variety of test examples in two-dimensional and three-dimensional settings. We explore the impact of the PDE transform parameters, such as the PDE order and propagation time, on the quality of resulting surfaces. Additionally, we utilize a set of 10 proteins to compare the computational efficiency of the present surface generation method and a standard approach in Cartesian meshes. Moreover, we analyze the present method by examining some benchmark indicators of biomolecular surface, that is, surface area, surface-enclosed volume, solvation free energy, and surface electrostatic potential. A test set of 13 protein molecules is used in the present investigation. The electrostatic analysis is carried out via the Poisson-Boltzmann equation model. To further demonstrate the utility of the present PDE transform-based surface method, we solve the Poisson-Nernst-Planck equations with a PDE transform surface of a protein. Second-order convergence is observed for the electrostatic potential and concentrations. Finally, to test the capability and efficiency of the present PDE transform-based surface generation method, we apply it to the construction of an excessively large biomolecule, a

Fractionalization of cyclic transformations in optics

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.; Calvo, M.L.

2005-01-01

The paper starts with some preparatory work on three types of transformations often used in information processing: a convolution, a matrix-vector multiplication, and a general linear integral transformation. In particular we represent these transformations in a diagonalized form. We then focus on

Twistor Transform for Spinning Particle

International Nuclear Information System (INIS)

Fedoruk, S.

2005-01-01

Twistorial formulation of a particle of arbitrary spin has been constructed. The twistor formulation is deduced from a space-time formulation of the spinning particle by introducing pure gauge Lorentz harmonics in this system. Canonical transformations and gauge fixing conditions, excluding space-time variables, produce the fundamental conditions of twistor transform relating the space-time formulation and twistor one. Integral transformations, relating massive twistor fields with usual space-time fields, have been constructed

Transformation properties of the integrable evolution equations

International Nuclear Information System (INIS)

Konopelchenko, B.G.

1981-01-01

Group-theoretical properties of partial differential equations integrable by the inverse scattering transform method are discussed. It is shown that nonlinear transformations typical to integrable equations (symmetry groups, Baecklund-transformations) and these equations themselves are contained in a certain universal nonlinear transformation group. (orig.)

General Correlation Theorem for Trinion Fourier Transform

OpenAIRE

Bahri, Mawardi

2017-01-01

- The trinion Fourier transform is an extension of the Fourier transform in the trinion numbers setting. In this work we derive the correlation theorem for the trinion Fourier transform by using the relation between trinion convolution and correlation definitions in the trinion Fourier transform domains.

Transformation of technical infrastructure

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

1998-01-01

article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

Graph Transformation Semantics for a QVT Language

NARCIS (Netherlands)

Rensink, Arend; Nederpel, Ronald; Bruni, Roberto; Varró, Dániel

It has been claimed by many in the graph transformation community that model transformation, as understood in the context of Model Driven Architecture, can be seen as an application of graph transformation. In this paper we substantiate this claim by giving a graph transformation-based semantics to

On Consistency of Operational Transformation Approach

Directory of Open Access Journals (Sweden)

Aurel Randolph

2013-02-01

Full Text Available The Operational Transformation (OT approach, used in many collaborative editors, allows a group of users to concurrently update replicas of a shared object and exchange their updates in any order. The basic idea of this approach is to transform any received update operation before its execution on a replica of the object. This transformation aims to ensure the convergence of the different replicas of the object, even though the operations are executed in different orders. However, designing transformation functions for achieving convergence is a critical and challenging issue. Indeed, the transformation functions proposed in the literature are all revealed incorrect. In this paper, we investigate the existence of transformation functions for a shared string altered by insert and delete operations. From the theoretical point of view, two properties – named TP1 and TP2 – are necessary and sufficient to ensure convergence. Using controller synthesis technique, we show that there are some transformation functions which satisfy only TP1 for the basic signatures of insert and delete operations. As a matter of fact, it is impossible to meet both properties TP1 and TP2 with these simple signatures.

Canonical transformations and hamiltonian path integrals

International Nuclear Information System (INIS)

Prokhorov, L.V.

1982-01-01

Behaviour of the Hamiltonian path integrals under canonical transformations produced by a generator, is investigated. An exact form is determined for the kernel of the unitary operator realizing the corresponding quantum transformation. Equivalence rules are found (the Hamiltonian formalism, one-dimensional case) enabling one to exclude non-standard terms from the action. It is shown that the Hamiltonian path integral changes its form under cononical transformations: in the transformed expression besides the classical Hamiltonian function there appear some non-classical terms

PENILAIAN KONDISI TRANSFORMATOR DAYA PADA PT.X

Directory of Open Access Journals (Sweden)

Badaruddin Badaruddin

2016-10-01

Full Text Available Transformator daya merupakan peralatan yang vital dalam penyaluran energi listrik dari unit pembangkit menuju sistem jaringan saluran tegangan. Kehandalan transformator daya sangat penting untuk keberhasilan operasi dari sistem tenaga listrik. Untuk itu dilakukan pendekatan sistematis dengan cara mengetahui kondisi peralatan komponen utama dari transformator daya tersebut. Transformator secara ideal memiliki useful life sesuai dengan design life yang direkomendasikan yaitu 30 tahun. Sedangkan transformator daya PT X sudah tidak berada dalam range useful life, dimana transformator daya tersebut diproduksi oleh Takaoka Electric pada tahun 1976. Oleh karena factor usia transformator yang sudah berumur maka diperlukan inspeksi khusus secara mendalamsebagai pendukung untuk membuat keputusan pembatasan operasi atau keputusan investasi pembangkit secara tepat dan tidak merugikan unit pembangkit itu sendiri. Untuk itu penulis melakukan serangkaian pengujian dan analisa penilaian kondisi transformator daya PT X untuk memperoleh nilai kondisi dengan mengacu  pada referensi penilaian HAP (Hydro Power Advancement Project. Hasil penilaian kondisi diharapkan nantinya akan digunakan sebagai bahan pendukung tindak lanjut pengambilan keputusan oleh PT. X.

Transformational leadership in nursing: a concept analysis.

Science.gov (United States)

Fischer, Shelly A

2016-11-01

To analyse the concept of transformational leadership in the nursing context. Tasked with improving patient outcomes while decreasing the cost of care provision, nurses need strategies for implementing reform in health care and one promising strategy is transformational leadership. Exploration and greater understanding of transformational leadership and the potential it holds is integral to performance improvement and patient safety. Concept analysis using Walker and Avant's (2005) concept analysis method. PubMed, CINAHL and PsychINFO. This report draws on extant literature on transformational leadership, management, and nursing to effectively analyze the concept of transformational leadership in the nursing context. This report proposes a new operational definition for transformational leadership and identifies model cases and defining attributes that are specific to the nursing context. The influence of transformational leadership on organizational culture and patient outcomes is evident. Of particular interest is the finding that transformational leadership can be defined as a set of teachable competencies. However, the mechanism by which transformational leadership influences patient outcomes remains unclear. Transformational leadership in nursing has been associated with high-performing teams and improved patient care, but rarely has it been considered as a set of competencies that can be taught. Also, further research is warranted to strengthen empirical referents; this can be done by improving the operational definition, reducing ambiguity in key constructs and exploring the specific mechanisms by which transformational leadership influences healthcare outcomes to validate subscale measures. © 2016 John Wiley & Sons Ltd.

Shearlet transform in aliased ground roll attenuation and its comparison with f-k filtering and curvelet transform

Science.gov (United States)

Abolfazl Hosseini, Seyed; Javaherian, Abdolrahim; Hassani, Hossien; Torabi, Siyavash; Sadri, Maryam

2015-06-01

Ground roll, which is a Rayleigh surface wave that exists in land seismic data, may mask reflections. Sometimes ground roll is spatially aliased. Attenuation of aliased ground roll is of importance in seismic data processing. Different methods have been developed to attenuate ground roll. The shearlet transform is a directional and multidimensional transform that generates subimages of an input image in different directions and scales. Events with different dips are separated in these subimages. In this study, the shearlet transform is used to attenuate the aliased ground roll. To do this, a shot record is divided into several segments, and the appropriate mute zone is defined for all segments. The shearlet transform is applied to each segment. The subimages related to the non-aliased and aliased ground roll are identified by plotting the energy distributions of subimages with visual checking. Then, muting filters are used on selected subimages. The inverse shearlet transform is applied to the filtered segment. This procedure is repeated for all segments. Finally, all filtered segments are merged using the Hanning window. This method of aliased ground roll attenuation was tested on a synthetic dataset and a field shot record from the west of Iran. The synthetic shot record included strong aliased ground roll, whereas the field shot record did not. To produce the strong aliased ground roll on the field shot record, the data were resampled in the offset direction from 30 to 60 m. To show the performance of the shearlet transform in attenuating the aliased ground roll, we compared the shearlet transform with the f-k filtering and curvelet transform. We showed that the performance of the shearlet transform in the aliased ground roll attenuation is better than that of the f-k filtering and curvelet transform in both the synthetic and field shot records. However, when the dip and frequency content of the aliased ground roll are the same as the reflections, ability of

Ancilla-approximable quantum state transformations

International Nuclear Information System (INIS)

Blass, Andreas; Gurevich, Yuri

2015-01-01

We consider the transformations of quantum states obtainable by a process of the following sort. Combine the given input state with a specially prepared initial state of an auxiliary system. Apply a unitary transformation to the combined system. Measure the state of the auxiliary subsystem. If (and only if) it is in a specified final state, consider the process successful, and take the resulting state of the original (principal) system as the result of the process. We review known information about exact realization of transformations by such a process. Then we present results about approximate realization of finite partial transformations. We not only consider primarily the issue of approximation to within a specified positive ε, but also address the question of arbitrarily close approximation

Control circuit for transformer relay

International Nuclear Information System (INIS)

Wyatt, G.A.

1984-01-01

A control circuit for a transformer relay which will automatically momentarily control the transformer relay to a selected state upon energization of the control circuit. The control circuit has an energy storage element and a current director coupled in series and adapted to be coupled with the secondary winding of the transformer relay. A device for discharge is coupled across the energy storage element. The energy storage element and current director will momentarily allow a unidirectional flow of current in the secondary winding of the transformer relay upon application of energy to the control circuit. When energy is not applied to the control circuit the device for discharge will allow the energy storage element to discharge and be available for another operation of the control circuit

Ancilla-approximable quantum state transformations

Energy Technology Data Exchange (ETDEWEB)

Blass, Andreas [Department of Mathematics, University of Michigan, Ann Arbor, Michigan 48109 (United States); Gurevich, Yuri [Microsoft Research, Redmond, Washington 98052 (United States)

2015-04-15

We consider the transformations of quantum states obtainable by a process of the following sort. Combine the given input state with a specially prepared initial state of an auxiliary system. Apply a unitary transformation to the combined system. Measure the state of the auxiliary subsystem. If (and only if) it is in a specified final state, consider the process successful, and take the resulting state of the original (principal) system as the result of the process. We review known information about exact realization of transformations by such a process. Then we present results about approximate realization of finite partial transformations. We not only consider primarily the issue of approximation to within a specified positive ε, but also address the question of arbitrarily close approximation.

Applied Laplace transforms and z-transforms for scientists and engineers a computational approach using a Mathematica package

CERN Document Server

Graf, Urs

2004-01-01

The theory of Laplace transformation is an important part of the mathematical background required for engineers, physicists and mathematicians. Laplace transformation methods provide easy and effective techniques for solving many problems arising in various fields of science and engineering, especially for solving differential equations. What the Laplace transformation does in the field of differential equations, the z-transformation achieves for difference equations. The two theories are parallel and have many analogies. Laplace and z­ transformations are also referred to as operational calculus, but this notion is also used in a more restricted sense to denote the operational calculus of Mikusinski. This book does not use the operational calculus of Mikusinski, whose approach is based on abstract algebra and is not readily accessible to engineers and scientists. The symbolic computation capability of Mathematica can now be used in favor of the Laplace and z-transformations. The first version of the Mathema...

30 CFR 57.12085 - Transformer stations.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Transformer stations. 57.12085 Section 57.12085 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Underground Only § 57.12085 Transformer stations. Transformer stations shall be enclosed to prevent persons...

Step-wise stimulated martensitic transformations

International Nuclear Information System (INIS)

Airoldi, G.; Riva, G.

1991-01-01

NiTi alloys, widely known both for their shape memory properties and for unusual pseudoelastic behaviour, are now on the forefront attention for step-wise induced memory processes, thermal or stress stimulated. Literature results related to step-wise stimulated martensite (direct transformation) are examined and contrasted with step-wise thermal stimulated parent phase (reverse transformation). Hypothesis are given to explain the key characters of both transformations, a thermodynamic model from first principles being till now lacking

Methodologies to increase the transformation efficiencies and the range of bacteria that can be transformed.

Science.gov (United States)

Aune, Trond Erik Vee; Aachmann, Finn Lillelund

2010-02-01

Methods for transfer of exogenous DNA into cells are essential for genetics and molecular biology, and the lack of effective methods hampers research on many different species of bacteria which have shown to be particularly recalcitrant to transformation. This review presents the progress on the development of methods for artificial transformation of bacteria with emphasis on different methodologies and the range of bacteria that can be transformed. The methods' strengths and weaknesses are described.

The Power of Transformation

DEFF Research Database (Denmark)

Foged, Hans Isak Worre

2017-01-01

Transformation of the built environment in Denmark is estimated to become 51% of the total building activities in the future in order to accommodate new energy targets, a general population move to the city and to maintain buildings, which otherwise presents high architectural qualities. This poi......Transformation of the built environment in Denmark is estimated to become 51% of the total building activities in the future in order to accommodate new energy targets, a general population move to the city and to maintain buildings, which otherwise presents high architectural qualities....... This points to the need of new ideas, methods and models for architects to transform existing building envelopes beyond the current primary approach of simply adding and external insulation layer. The research studies and present thermal simulation methods, models, elementary design studies and applied design...... approaches to envelope transformations based on modifying colours and local geometries of an envelope. The study finds that colour can be used instrumentally as a design variable to control external surface heat accumulation and envelope heat transfer, whereas local geometric variations only present...

Untitled

Indian Academy of Sciences (India)

generalization, PhD Thesis, Rice University, Houston, Texas. Merchant G A 1988 Recursive construction of polynomial with prescribed phase on unit circle. IEEE. Trans. Acoust., Speech Signal Process. ASSP-36: 1531-1533. Merchant GA, Parks T W 1982 Efficient solution of a Toeplitz-plus-Hankel coefficient matrix system.

Multi-channel phase-equivalent transformation and supersymmetry

OpenAIRE

Shirokov, A. M.; Sidorenko, V. N.

2000-01-01

Phase-equivalent transformation of local interaction is generalized to the multi-channel case. Generally, the transformation does not change the number of the bound states in the system and their energies. However, with a special choice of the parameters, the transformation removes one of the bound states and is equivalent to the multi-channel supersymmetry transformation recently suggested by Sparenberg and Baye. Using the transformation, it is also possible to add a bound state to the discr...

Entanglement-continuous unitary transformations

Energy Technology Data Exchange (ETDEWEB)

Sahin, Serkan; Orus, Roman [Institute of Physics, Johannes Gutenberg University, 55099 Mainz (Germany)

2016-07-01

In this talk we present a new algorithm for quantum many-body systems using continuous unitary transformations (CUT) and tensor networks (TNs). With TNs we are able to approximate the solution to the flow equations that lie at the heart of continuous unitary transformations. We call this method Entanglement-Continuous Unitary Transformations (eCUT). It allows us to compute expectation values of local observables as well as tensor network representations of ground states and low-energy excited states. An implementation of the method is shown for 1d systems using matrix product operators. We show preliminary results for the 1d transverse-field Ising model to demonstrate the feasibility of the method.

Security Transformation

National Research Council Canada - National Science Library

Metz, Steven

2003-01-01

... adjustment. With American military forces engaged around the world in both combat and stabilization operations, the need for rigorous and critical analysis of security transformation has never been greater...

Methods for genetic transformation of filamentous fungi.

Science.gov (United States)

Li, Dandan; Tang, Yu; Lin, Jun; Cai, Weiwen

2017-10-03

Filamentous fungi have been of great interest because of their excellent ability as cell factories to manufacture useful products for human beings. The development of genetic transformation techniques is a precondition that enables scientists to target and modify genes efficiently and may reveal the function of target genes. The method to deliver foreign nucleic acid into cells is the sticking point for fungal genome modification. Up to date, there are some general methods of genetic transformation for fungi, including protoplast-mediated transformation, Agrobacterium-mediated transformation, electroporation, biolistic method and shock-wave-mediated transformation. This article reviews basic protocols and principles of these transformation methods, as well as their advantages and disadvantages.

Faculty Transformation in Curriculum Transformation: The Role of Faculty Development in Campus Internationalization

Science.gov (United States)

Niehaus, Elizabeth; Williams, Letitia

2016-01-01

Curriculum transformation is often cited as one of the key strategies for internationalizing higher education in the United States, and faculty members play a central role in this process. The purpose of the study we report here was to explore the potential for professional development initiatives to foster the transformation in perspectives…

The Houdini Transformation: True, but Illusory

Science.gov (United States)

Bentler, Peter M.; Molenaar, Peter C. M.

2012-01-01

Molenaar (2003, 2011) showed that a common factor model could be transformed into an equivalent model without factors, involving only observed variables and residual errors. He called this invertible transformation the Houdini transformation. His derivation involved concepts from time series and state space theory. This article verifies the…

Wigner distribution and fractional Fourier transform

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.; Boashash, B.

2003-01-01

We have described the relationship between the fractional Fourier transform and the Wigner distribution by using the Radon-Wigner transform, which is a set of projections of the Wigner distribution as well as a set of squared moduli of the fractional Fourier transform. We have introduced the concept

TGGs for Transforming UML to CSP

DEFF Research Database (Denmark)

Greenyer, Joel; Kindler, Ekkart; Rieke, Jan

Contest. The second transformation problem, a transformation from UML activity diagrams to CSP processes, i.e. a transformation between two models, is a typical application for Triple Graph Grammars (TGGs). We present our contributed solution, presenting the TGG rules and the implementation of our TGG...... interpreter. Moreover, we point out the advantages of our soulution as well as some restrictions of the current implementation. This paper will only briefly state the transformation problem and focus on our TGG approach and the discussion of the rules....

The fractional Fourier transform and applications

Science.gov (United States)

Bailey, David H.; Swarztrauber, Paul N.

1991-01-01

This paper describes the 'fractional Fourier transform', which admits computation by an algorithm that has complexity proportional to the fast Fourier transform algorithm. Whereas the discrete Fourier transform (DFT) is based on integral roots of unity e exp -2(pi)i/n, the fractional Fourier transform is based on fractional roots of unity e exp -2(pi)i(alpha), where alpha is arbitrary. The fractional Fourier transform and the corresponding fast algorithm are useful for such applications as computing DFTs of sequences with prime lengths, computing DFTs of sparse sequences, analyzing sequences with noninteger periodicities, performing high-resolution trigonometric interpolation, detecting lines in noisy images, and detecting signals with linearly drifting frequencies. In many cases, the resulting algorithms are faster by arbitrarily large factors than conventional techniques.

Full three-dimensional isotropic transformation media

International Nuclear Information System (INIS)

García-Meca, C; Martí, J; Martínez, A; Ortuño, R

2014-01-01

We present a method that enables the implementation of full three-dimensional (3D) transformation media with minimized anisotropy. It is based on a special kind of shape-preserving mapping and a subsequent optimization process. For sufficiently smooth transformations, the resulting anisotropy can be neglected, paving the way for practically realizable 3D devices. The method is independent of the considered wave phenomenon and can thus be applied to any field for which a transformational technique exists, such as acoustics or thermodynamics. Full 3D isotropy has an additional important implication for optical transformation media, as it eliminates the need for magnetic materials in many situations. To illustrate the potential of the method, we design 3D counterparts of transformation-based electromagnetic squeezers and bends. (paper)

Model based analysis of piezoelectric transformers.

Science.gov (United States)

Hemsel, T; Priya, S

2006-12-22

Piezoelectric transformers are increasingly getting popular in the electrical devices owing to several advantages such as small size, high efficiency, no electromagnetic noise and non-flammable. In addition to the conventional applications such as ballast for back light inverter in notebook computers, camera flash, and fuel ignition several new applications have emerged such as AC/DC converter, battery charger and automobile lighting. These new applications demand high power density and wide range of voltage gain. Currently, the transformer power density is limited to 40 W/cm(3) obtained at low voltage gain. The purpose of this study was to investigate a transformer design that has the potential of providing higher power density and wider range of voltage gain. The new transformer design utilizes radial mode both at the input and output port and has the unidirectional polarization in the ceramics. This design was found to provide 30 W power with an efficiency of 98% and 30 degrees C temperature rise from the room temperature. An electro-mechanical equivalent circuit model was developed to describe the characteristics of the piezoelectric transformer. The model was found to successfully predict the characteristics of the transformer. Excellent matching was found between the computed and experimental results. The results of this study will allow to deterministically design unipoled piezoelectric transformers with specified performance. It is expected that in near future the unipoled transformer will gain significant importance in various electrical components.

Electrotechnical installations. Transformer stations. Construction; transformer rooms. Elektrotechnische Anlagen. Transformatorenstationen. Bauliche Ausfuehrung; Raeume fuer Transformatoren

Energy Technology Data Exchange (ETDEWEB)

1976-05-01

The data sheet to standardize the construction of transformer rooms for stationary transformers and takes into account the replacement of transformers by units made by different manufacturers. It contains information about the position, dimensions, load assumptions, construction of ceilings, walls and floors, cable routes, electric installations for lighting and ventilation systems, windows and doors, venting, paint and surface protection coatings, arrangement and design of oil catch pans, and calculation of the venting cross sections. Pertinent VDE rules are listed.

Regular Riemann-Hilbert transforms, Baecklund transformations and hidden symmetry algebra for some linearization systems

International Nuclear Information System (INIS)

Chau Ling-Lie; Ge Mo-Lin; Teh, Rosy.

1984-09-01

The Baecklund Transformations and the hidden symmetry algebra for Self-Dual Yang-Mills Equations, Landau-Lifshitz equations and the Extended Super Yang-Mills fields (N>2) are discussed on the base of the Regular Riemann-Hilbert Transform and the linearization equations. (author)

Generalized phase transformations of spinor fields

International Nuclear Information System (INIS)

Mikhov, S.G.

1993-09-01

In this paper some generalized four parameter phase transformations of a Dirac spinor are considered. It is shown that a corresponding compensating transformation of the electromagnetic field which restores the invariance of the Dirac-Maxwell equation might exist, provided some consistency conditions are satisfied by the parameters of the transformations. These transformations are used further to consider the Maxwell equations under the assumption that a Bosonization takes place. Only one of the considered cases proves to have a solution (the other cases show to be trivial) which although unphysical is obtained explicitly. (author). 10 refs

A Fast Mellin and Scale Transform

Directory of Open Access Journals (Sweden)

Davide Rocchesso

2007-01-01

Full Text Available A fast algorithm for the discrete-scale (and β-Mellin transform is proposed. It performs a discrete-time discrete-scale approximation of the continuous-time transform, with subquadratic asymptotic complexity. The algorithm is based on a well-known relation between the Mellin and Fourier transforms, and it is practical and accurate. The paper gives some theoretical background on the Mellin, β-Mellin, and scale transforms. Then the algorithm is presented and analyzed in terms of computational complexity and precision. The effects of different interpolation procedures used in the algorithm are discussed.

A Fast Mellin and Scale Transform

Directory of Open Access Journals (Sweden)

Rocchesso Davide

2007-01-01

Full Text Available A fast algorithm for the discrete-scale (and -Mellin transform is proposed. It performs a discrete-time discrete-scale approximation of the continuous-time transform, with subquadratic asymptotic complexity. The algorithm is based on a well-known relation between the Mellin and Fourier transforms, and it is practical and accurate. The paper gives some theoretical background on the Mellin, -Mellin, and scale transforms. Then the algorithm is presented and analyzed in terms of computational complexity and precision. The effects of different interpolation procedures used in the algorithm are discussed.

Rectifier transformer saturation on commutation failure

International Nuclear Information System (INIS)

Lu, E.; Bronner, G.

1989-01-01

The rectifier transformer's service differs from the power transformer's service because of the rectifier load. Under certain fault conditions, such as a commutation failure, d.c. magnetization may be introduced into the rectifier transformer cores, resulting in possible saturation of the magnetic circuit, thus in degradation of the performance of the transformer. It is the purpose of this paper to present an approach for evaluating the electromagnetic transient process under such a fault condition. The studies were made on the operating 1000MVA converter system at the Princeton Plasma Physics Laboratory

Embedded Solenoid Transformer for Power Conversion

DEFF Research Database (Denmark)

2015-01-01

A resonant power converter for operation in the radio frequency range, preferably in the VHF, comprises at least one PCB-embedded transformer. The transformer is configured for radio frequency operation and comprises a printed circuit board defining a horizontal plane, the printed circuit board...... comprising at least two horizontal conductive layers separated by an isolating layer, a first embedded solenoid forming a primary winding of the transformer and a second embedded solenoid being arranged parallel to the first solenoid and forming a secondary winding of the transformer, wherein the first...

Transformational leadership in nursing practice.

Science.gov (United States)

Doody, Owen; Doody, Catriona M

Traditionally, nurses have been over-managed and led inadequately, yet today they face unprecedented challenges and opportunities. Organisations constantly face changes that require an increasingly adaptive and flexible leadership. This type of adaptive leadership is referred to as 'transformational'; under it, environments of shared responsibilities that influence new ways of knowing are created. Transformational leadership motivates followers by appealing to higher ideas and moral values, where the leader has a deep set of internal values and ideas. This leads to followers acting to sustain the greater good, rather than their own interests, and supportive environments where responsibility is shared. This article focuses on transformational leadership and its application to nursing through the four components of transformational leadership. These are: idealised influence; inspirational motivation; intellectual stimulation; and individual consideration.

Transformative Theory in Social Research

DEFF Research Database (Denmark)

Ravn, Ib

Social-scientific theory usually represents an attempt to describe or explain social phenomena and, sometimes, to criticize them. However, a theory can be transformative in the sense that in using and testing it, researchers may help practitioners transform and improve their social conditions......, institutions or organisations. This idea is illustrated by a research-and-development effort to help conference organisers develop meeting formats that create more learning among delegates than is accomplished by the conventional, lecture-based format. This effort was based on a (transformative) theory...... of conferences as forums for learning and "human co-flourishing." Seventeen learning techniques were derived from the theory and were tested as hypotheses: When implemented in 30 live experiments, did they contribute to learning, as specified by the theory? Properties of transformative theory that distinguish...

Phase transformations in engineering materials

International Nuclear Information System (INIS)

Bourke, M.A.M.; Lawson, A.C.; Dunand, D.C.

1996-01-01

Phase transformations in engineering materials are inevitably related to mechanical behavior and are often precursors to residual stress and distortion. Neutron scattering in general is a valuable tool for studying their effects, and pulsed neutrons are of special value, because of the inherently comprehensive crystallographic coverage they provide in each measurement. At the Manuel Lujan neutron scattering center several different research programs have addressed the relationships between phase transformation/mechanical behavior and residual strains. Three disparate examples are presented; (1) stress induced transformation in a NiTi shape memory alloy, (2) cryogenically induced transformation in a quenched 5180 steel, and (3) time resolved evolution of strain induced martensite in 304 stainless steel. In each case a brief description of the principle result will be discussed in the context of using neutrons for the measurement

Quantization Distortion in Block Transform-Compressed Data

Science.gov (United States)

Boden, A. F.

1995-01-01

The popular JPEG image compression standard is an example of a block transform-based compression scheme; the image is systematically subdivided into block that are individually transformed, quantized, and encoded. The compression is achieved by quantizing the transformed data, reducing the data entropy and thus facilitating efficient encoding. A generic block transform model is introduced.

Discrete Gabor transform and discrete Zak transform

NARCIS (Netherlands)

Bastiaans, M.J.; Namazi, N.M.; Matthews, K.

1996-01-01

Gabor's expansion of a discrete-time signal into a set of shifted and modulated versions of an elementary signal or synthesis window is introduced, along with the inverse operation, i.e. the Gabor transform, which uses an analysis window that is related to the synthesis window and with the help of

Emotional Dynamics in Conflict and Conflict Transformation

DEFF Research Database (Denmark)

Poder, Poul; Bramsen, Isabel

2018-01-01

Isabel Bramsen & Poul Poder 2018. Emotional Dynamics in Conflict and Conflict Transformation. Berghof Handbook for Conflict Transformation, Online Edition. Berlin: Berghof Foundation. Transformation. Berghof Handbook for Conflict Transformation, Online Edition. Berlin: Berghof Foundation.

Stories of Transformation: Using Personal Narrative to Explore Transformative Experience among Undergraduate Peer Mentors

Science.gov (United States)

Bunting, Bryce; Williams, David

2017-01-01

While past researchers suggest undergraduate peer mentors (PMs) benefit from mentoring their peers, this experience is rarely associated with transformative learning. Using narrative analysis of authentic mentoring stories, we explored how particular types of mentoring experiences contribute to transformative learning for PMs of first-year…

In-situ characterization of transformation plasticity during an isothermal austenite-to-bainite phase transformation

International Nuclear Information System (INIS)

Holzweissig, M.J.; Canadinc, D.; Maier, H.J.

2012-01-01

This paper elucidates the stress-induced variant selection process during the isothermal austenite-to-bainite phase transformation in a tool steel. Specifically, a thorough set of experiments combining electron backscatter diffraction and in-situ digital image correlation (DIC) was carried out to establish the role of superimposed stress level on the evolution of transformation plasticity (TP) strains. The important finding is that TP increases concomitant with the superimposed stress level, and strain localization accompanies phase transformation at all stress levels considered. Furthermore, TP strain distribution within the whole material becomes more homogeneous with increasing stress, such that fewer bainitic variants are selected to grow under higher stresses, yielding a more homogeneous strain distribution. In particular, the bainitic variants oriented along [101] and [201] directions are favored to grow parallel to the loading axis and are associated with large TP strains. Overall, this very first in-situ DIC investigation of the austenite-to-bainite phase transformation in steels evidences the clear relationship between the superimposed stress level, variant selection, and evolution of TP strains. - Highlights: ► Local variations of strain were observed by DIC throughout the phase transformation. ► The study clearly established the role of the stress-induced variant selection. ► Variant selection is a key parameter that governs distortion.

Transformation of Mortierella alpina (fatty acid supplier myceliums via AMT system (Agrobacterium Mediated Transformation

Directory of Open Access Journals (Sweden)

Aida Javanmard

2016-09-01

Full Text Available Introduction: Mortierella alpina is one of the most important fungi in food industry because of having ability of synthesizing unsaturated fatty acids, particularly Arashidonic Acid. This is a precursor of Eicosanoidregulate-lipoprotein metabolism which is involved in blood rheology, platelet activation and leukocyte-function, and the functional characteristics of the cell membrane. Materials and methods: In this study genetic transformation of M. alpina CBS754.68 fungus was evaluated via Agrobacterium tumefaciens and Agrobacterium rhizogenes. Agrobacteriums containing pBI121 vector were used for transformation of three days of old mycelia. Three days old hyphae were exposed to the bacteria with three level of time (one, two and three hours in the present of acetosyringone. Mitotic stability of the third generation of transgenic (T2 was confirmed by GUS assay and amplification of CaMV 35S promoter by polymerase chain reaction. Results: The highest percentage of transformation and mitotic stability were obtained by using A. tumefaciens and A. rhizogenese, respectively. Discussion and conclusion: The results showed that to obtain more efficient and more stable transformation, the fundamental factor is the use of suitable species of Agrobacterium. It is the first report for transformation of autothroph strain of M. alpine via Agrobacterium.

Factors affecting the efficient transformation of Colletotrichum species

Science.gov (United States)

Redman, Regina S.; Rodriguez, Rusty J.

1994-01-01

Factors affecting the efficient transformation of Colletotrichum species. Experimental Mycology, 18, 230-246. Twelve isolates representing four species of Colletotrichum were transformed either by enhanced protoplast, restriction enzyme-mediated integration (REMI), or electroporation-mediated protocols. The enhanced protoplast transformation protocol resulted in 100- and 50-fold increases in the transformation efficiencies of Colletotrichum lindemuthianum and C. magna , respectively. REMI transformation involved the use of Hin dIII and vector DNA linearized with HindIII to increase the number of integration events and potential gene disruptions in the fungal genome. Combining the enhanced protoplast and the REMI protocols resulted in a 22-fold increase in the number of hygromycin/nystatin-resistant mutants in C. lindemuthianum . Electroporation-mediated transformation was performed on mycelial fragments and spores of four Colletotrichum species, resulting in efficiencies of up to 1000 transformants/μg DNA. The pHA1.3 vector which confers hygromycin resistance contains telomeric sequences from Fusarium oxysporum , transforms by autonomous replication and genomic integration, and was essential for elevated transformation efficiencies of 100 to 10,000 transformants/μg DNA. Modifications of pHA1.3 occurred during bacterial amplification and post fungal transformation resulting in plasmids capable of significantly elevated transformation efficiencies in C. lindemuthianum.

Application of Hadamard transform in IMS

International Nuclear Information System (INIS)

Sha Miaomiao; Liu Weihao; Chen Yong; Jiang Dazhen

2008-01-01

Hadamard transform can improve the SNR by increasing the ion duty cycle in IMS. In this paper, the ion spectral signals were processed by Hadamard transform based on the IMS detector hardware platform. The results showed that Hadamard transform can greatly improve the SNR of the IMS detector in contrast with traditional method. (authors)

Phase transformations in nickel sulphide: Microstructures and mechanisms

International Nuclear Information System (INIS)

Yousfi, Oussama; Donnadieu, Patricia; Brechet, Yves; Robaut, Florence; Charlot, Frederic; Kasper, Andreas; Serruys, Francis

2010-01-01

Nickel sulphide inclusions are known to be responsible for delayed fracture in tempered glasses due to phase transformation within the inclusion. Microstructural identification of the phase transformation mechanisms in the Ni-S system close to the NiS composition were carried out on a series of partially transformed states. Observations allow to investigate the morphological evolution during transformation, the phase orientation relationships and the first stages of the transformation were investigated by optical microscopy, electron backscatter diffraction, and scanning and transmission electron microscopy. The transformation mechanisms change significantly with the change in sulphur content of the α-NiS phase. Massive transformation is observed for near-stoichiometric composition. For overstoichiometric composition, the transformation is controlled by a long-range diffusion mechanism. The influence of stoichiometry and impurities (Fe) on the microstructural evolution and transformation mechanisms has also been studied.

Higher derivatives in gauge transformations

International Nuclear Information System (INIS)

Gogilidze, S.A.; Sanadze, V.V.; Tkebuchava, F.G.

1992-01-01

The mechanism of appearance of highher derivatives of coordinates in the symmetry transformation law of the second Noether's theorem is established. It is shown that the corresponding transformations are canonical in the extended phase space. 15 refs

Allotropic transformation bcc in equilibrium hcp in zirconium

International Nuclear Information System (INIS)

Akhtar, A.

1976-01-01

The allotropic transformation hcp(α) in equilibrium bcc(β) was examined in crystal bar zirconium. The β → α transformation is massive type in melt grown crystals of β--Zr. Upon thermal cycling through α → β → α the bcc → hcp transformation occurs frequently through a shear process and less frequently through a massive transformation. The presence of α → β transformation substructure may favor the operation of the shear mode. The hcp → bcc phase change occurs through a massive transformation. A lack of transformation memory is associated with the process of thermal cycling. 11 fig., 3 tables

Radiogenic cell transformation and carcinogenesis

Science.gov (United States)

Yang, T. C.; Georgy, K. A.; Mei, M.; Durante, M.; Craise, L. M.

1995-01-01

Radiation carcinogenesis is one of the major biological effects considered important in the risk assessment for space travel. Various biological model systems, including both cultured cells and animals, have been found useful for studying the carcinogenic effects of space radiations, which consist of energetic electrons, protons and heavy ions. The development of techniques for studying neoplastic cell transformation in culture has made it possible to examine the cellular and molecular mechanisms of radiation carcinogenesis. Cultured cell systems are thus complementary to animal models. Many investigators have determined the oncogenic effects of ionizing and nonionizing radiation in cultured mammalian cells. One of the cell systems used most often for radiation transformation studies is mouse embryonic cells (C3H10T1/2), which are easy to culture and give good quantitative dose-response curves. Relative biological effectiveness (RBE) for heavy ions with various energies and linear energy transfer (LET) have been obtained with this cell system. Similar RBE and LET relationship was observed by investigators for other cell systems. In addition to RBE measurements, fundamental questions on repair of sub- and potential oncogenic lesions, direct and indirect effect, primary target and lesion, the importance of cell-cell interaction and the role of oncogenes and tumor suppressor genes in radiogenic carcinogenesis have been studied, and interesting results have been found. Recently several human epithelial cell systems have been developed, and ionizing radiation have been shown to transform these cells. Oncogenic transformation of these cells, however, requires a long expression time and/or multiple radiation exposures. Limited experimental data indicate high-LET heavy ions can be more effective than low-LET radiation in inducing cell transformation. Cytogenetic and molecular analyses can be performed with cloned transformants to provide insights into basic genetic

Transformers and the Electric Utility System

Science.gov (United States)

Roman, Harry T.

2005-01-01

For electric energy to get from the generating station to a home, it must pass through a transformer, a device that can change voltage levels easily. This article describes how transformers work, covering the following topics: (1) the magnetism-electricity link; (2) transformer basics; (3) the energy seesaw; (4) the turns ratio rule; and (5)…

A Cross-Cultural Study on Transformational Leadership

Institute of Scientific and Technical Information of China (English)

XU Wei

2016-01-01

This paper examines transformational leadership theory and the relationship between transformational leadership and group performance as well. Transformational leadership asks leaders to understand the needs of followers and motivate follow-ers for their overall development, which brings benefits to a group. It is hoped that this paper can contribute to comparative stud-ies on Transformational leadership in the U.S. and China.

Promoting Transformational Leadership Through Air Force Culture

Science.gov (United States)

2013-03-01

transformational leadership styles . Transformational leaders lead through social exchange, help followers grow, and empower their organization by aligning goals...Transformational leadership will truly allow the USAF to do more with less, as it improves productivity. This paper examines leadership styles and...analyzing and evaluating the effectiveness of various leadership styles , the transformational leadership theory is quickly becoming a choice approach.10

Multiple-copy entanglement transformation and entanglement catalysis

International Nuclear Information System (INIS)

Duan Runyao; Feng Yuan; Li Xin; Ying Mingsheng

2005-01-01

We prove that any multiple-copy entanglement transformation [S. Bandyopadhyay, V. Roychowdhury, and U. Sen, Phys. Rev. A 65, 052315 (2002)] can be implemented by a suitable entanglement-assisted local transformation [D. Jonathan and M. B. Plenio, Phys. Rev. Lett. 83, 3566 (1999)]. Furthermore, we show that the combination of multiple-copy entanglement transformation and the entanglement-assisted one is still equivalent to the pure entanglement-assisted one. The mathematical structure of multiple-copy entanglement transformations then is carefully investigated. Many interesting properties of multiple-copy entanglement transformations are presented, which exactly coincide with those satisfied by the entanglement-assisted ones. Most interestingly, we show that an arbitrarily large number of copies of state should be considered in multiple-copy entanglement transformations

The numerical method of inverse Laplace transform for calculation of overvoltages in power transformers and test results

Directory of Open Access Journals (Sweden)

Mikulović Jovan Č.

2014-01-01

Full Text Available A methodology for calculation of overvoltages in transformer windings, based on a numerical method of inverse Laplace transform, is presented. Mathematical model of transformer windings is described by partial differential equations corresponding to distributed parameters electrical circuits. The procedure of calculating overvoltages is applied to windings having either isolated neutral point, or grounded neutral point, or neutral point grounded through impedance. A comparative analysis of the calculation results obtained by the proposed numerical method and by analytical method of calculation of overvoltages in transformer windings is presented. The results computed by the proposed method and measured voltage distributions, when a voltage surge is applied to a three-phase 30 kVA power transformer, are compared. [Projekat Ministartsva nauke Republike Srbije, br. TR-33037 i br. TR-33020

Transformational Leadership in Education: Concept Analysis

Directory of Open Access Journals (Sweden)

Cristina MORA

2012-12-01

Full Text Available Leadership has been one of the most studied concepts in the last 50 years in Western countries but has become a buzz word in social sciences in the former communist countries only recently. Transformational leadership theory is of high interest for social researchers especially because of the argument of achieving performance beyond the expectations that it promises. The present paper is focused on offering a short theoretical framing of transformational leadership and discusses from a theoretical standpoint the possibility of a transformational change of the Romanian educational system starting from the transformational leadership paradigm.

A hybrid Scatter/Transform cloaking model

Directory of Open Access Journals (Sweden)

Gad Licht

2015-01-01

Full Text Available A new Scatter/Transform cloak is developed that combines the light bending of refraction characteristic of a Transform cloak with the scatter cancellation characteristic of a Scatter cloak. The hybrid cloak incorporates both Transform’s variable index of refraction with modified linear intrusions to maximize the Scatter cloak effect. Scatter/Transform improved the scattering cross-section of cloaking in a 2-dimensional space to 51.7% compared to only 39.6% or 45.1% respectively with either Scatter or Transform alone. Metamaterials developed with characteristics based on the new ST hybrid cloak will exhibit superior cloaking capabilities.

Study of allotropic transformations in plutonium

International Nuclear Information System (INIS)

Spriet, B.

1966-06-01

The allotropic transformations in plutonium have been studied by different methods: metallography, dilatometry, thermal analysis, resistivity measurements, examination with a hot stage microscope. In order to study the importance of the purity, purification process such as zone-melting or electro-diffusion have been developed. The characteristics of the α ↔ β transformation can be explained in terms of the influence of internal stresses on the transition temperature and on the transformation kinetics. Some particular characteristics of δ → γ, γ → α, δ ↔ ε, β ↔ γ and δ → α transformations are also given. (author) [fr

Peculiarities of transformation processes in East Germany

Directory of Open Access Journals (Sweden)

Marion Dathe

2011-03-01

Full Text Available The process of socio-economic transformation of East German lands after the German reunification in 1990 is analyzed, the term "transformation" in frames of planned and market economies is defined. The author studies the historical determinants of the transformation process in Germany. German economic and industrial history in context of the driving forces and their social values, as well as the properties of the planning and economic systems that underlie the transformation of East German mentality, are considered. Further analysis is connected with economic, social and political components of the East German transformation process, "the dominance of the West", the collapse of the Council for Mutual Economic Assistance, privatization etc. Finally, the outcome of already traversed path of transformation of East Germany is considered. It is concluded, that the transformation process is not only historically conditioned situations of both the merging parties in the case of Germany, but also the positive or negative perception of its results and the motivation for its further implementation.

Matrix transformations and sequence spaces

International Nuclear Information System (INIS)

Nanda, S.

1983-06-01

In most cases the most general linear operator from one sequence space into another is actually given by an infinite matrix and therefore the theory of matrix transformations has always been of great interest in the study of sequence spaces. The study of general theory of matrix transformations was motivated by the special results in summability theory. This paper is a review article which gives almost all known results on matrix transformations. This also suggests a number of open problems for further study and will be very useful for research workers. (author)

DNA Uptake by Transformable Bacteria

Energy Technology Data Exchange (ETDEWEB)

Lacks, Sanford A.

1999-03-31

The various processes of DNA uptake by cells can be categorized as: viral DNA entry, conjugation, or transformation. Within each category, a variety of mechanisms have been found. However, considerable similarities occur among the different mechanisms of conjugation and, especially, transformation. All of these natural mechanisms of DNA transfer are quite elaborate and involve multiple protein components, as the case may be, of the virus, the donor cell, and the recipient cell. The mechanisms of viral infection and conjugation will be discussed mainly with respect to their relevance to transformation.

DNA UPTAKE BY TRANSFORMABLE BACTERIA

Energy Technology Data Exchange (ETDEWEB)

LACKS,S.A.

1999-09-07

The various processes of DNA uptake by cells can be categorized as: viral DNA entry, conjugation, or transformation. Within each category, a variety of mechanisms have been found. However, considerable similarities occur among the different mechanisms of conjugation and, especially, transformation. All of these natural mechanisms of DNA transfer are quite elaborate and involve multiple protein components, as the case may be, of the virus, the donor cell, and the recipient cell. The mechanisms of viral infection and conjugation will be discussed mainly with respect to their relevance to transformation.

Comparison of Fourier transform and continuous wavelet transform to study echo-planar imaging flow maps

Energy Technology Data Exchange (ETDEWEB)

Rodriguez G, A.; Bowtell, R.; Mansfield, P. [Area de Procesamiento Digital de Senales e Imagenes Biomedicas. Universidad Autonoma Metropolitana Iztapalapa. Mexico D.F. 09340 Mexico (Mexico)

1998-12-31

Velocity maps were studied combining Doyle and Mansfield method (1986) with each of the following transforms: Fourier, window Fourier and wavelet (Mexican hat). Continuous wavelet transform was compared against the two Fourier transform to determine which technique is best suited to study blood maps generated by Half Fourier Echo-Planar Imaging. Coefficient images were calculated and plots of the pixel intensity variation are presented. Finally, contour maps are shown to visualize the behavior of the blood flow in the cardiac chambers for the wavelet technique. (Author)

Comparison of Fourier transform and continuous wavelet transform to study echo-planar imaging flow maps

International Nuclear Information System (INIS)

Rodriguez G, A.; Bowtell, R.; Mansfield, P.

1998-01-01

Velocity maps were studied combining Doyle and Mansfield method (1986) with each of the following transforms: Fourier, window Fourier and wavelet (Mexican hat). Continuous wavelet transform was compared against the two Fourier transform to determine which technique is best suited to study blood maps generated by Half Fourier Echo-Planar Imaging. Coefficient images were calculated and plots of the pixel intensity variation are presented. Finally, contour maps are shown to visualize the behavior of the blood flow in the cardiac chambers for the wavelet technique. (Author)

Player Transformation of Educational Multiplayer Games

DEFF Research Database (Denmark)

Magnussen, Rikke; Misfeldt, Morten

2004-01-01

transformed the game to accommodate social interaction. With these transformed ways of playing the game, they managed to get to the top of the high score list while avoiding the educational parts of the game. Players transforming educational games to escape learning elements can be a problem when these games...... are used for formal education. In this paper we argue that player transformation of educational games can, however, be the basis of exciting and unconventional learning of valuable things, such as how to transform information technology to better accommodate social interaction.......Children's great interest in multiplayer games has led to attempts to design educational multiplayer games. In this study, we have studied a test of an educational multiplayer game designed for mathematics education for children aged nine to twelve. In our observations, it became clear that pupils...

Frequency analysis of DC tolerant current transformers

International Nuclear Information System (INIS)

Mlejnek, P; Kaspar, P

2013-01-01

This article deals with wide frequency range behaviour of DC tolerant current transformers that are usually used in modern static energy meters. In this application current transformers must comply with European and International Standards in their accuracy and DC tolerance. Therefore, the linear DC tolerant current transformers and double core current transformers are used in this field. More details about the problems of these particular types of transformers can be found in our previous works. Although these transformers are designed mainly for power distribution network frequency (50/60 Hz), it can be interesting to understand their behaviour in wider frequency range. Based on this knowledge the new generations of energy meters with measuring quality of electric energy will be produced. This solution brings better measurement of consumption of nonlinear loads or measurement of non-sinusoidal voltage and current sources such as solar cells or fuel cells. The determination of actual power consumption in such energy meters is done using particular harmonics component of current and voltage. We measured the phase and ratio errors that are the most important parameters of current transformers, to characterize several samples of current transformers of both types

Supersymmetrically transformed periodic potentials

OpenAIRE

C, David J. Fernandez

2003-01-01

The higher order supersymmetric partners of a stationary periodic potential are studied. The transformation functions associated to the band edges do not change the spectral structure. However, when the transformation is implemented for factorization energies inside of the forbidden bands, the final potential will have again the initial band structure but it can have bound states encrusted into the gaps, giving place to localized periodicity defects.

The Transformation of Disabilities Organizations

Science.gov (United States)

Schalock, Robert L.; Verdugo, Miguel-Angel

2013-01-01

This article summarizes the five major characteristics of the transformation era and describes how intellectual and closely related developmental disabilities organizations can apply specific transformation strategies associated with each characteristic. Collectively, the characteristics and strategies provide a framework for transformation…

Canonical transformations and generating functionals

NARCIS (Netherlands)

Broer, L.J.F.; Kobussen, J.A.

1972-01-01

It is shown that canonical transformations for field variables in hamiltonian partial differential equations can be obtained from generating functionals in the same way as classical canonical transformations from generating functions. A simple proof of the relation between infinitesimal invariant

Spotlight on modern transformer design

CERN Document Server

Georgilakis, Pavlos S

2009-01-01

Increasing competition in the global transformer market has put tremendous responsibilities on the industry to increase reliability while reducing cost. This book introduces an approach to transformer design using artificial intelligence (AI) techniques in combination with finite element method (FEM).

Transformational Leadership, Integrity, and Power

Science.gov (United States)

Harrison, Laura M.

2011-01-01

Transformational leadership enjoys widespread appeal among student affairs professionals. National Association of Student Personnel Administrators (NASPA) and American College Personnel Association (ACPA) conferences frequently feature speakers who promote transformational leadership's two primary tenets: (1) change is the central purpose of…

Learners engaging with transformation geometry

African Journals Online (AJOL)

participants engaged in investigative semi-structured interviews with the resear- chers. ... Keywords: analysis; conversions; transformation geometry; transformations; treatments .... semiotic systems of representation is not only to designate mathematical objects or to com- municate but also to ... Research design. We believe ...

Sustainability and transformation plans: translating the perspectives.

Science.gov (United States)

Thakrar, Sonali V; Bell, Diane

2017-10-02

Each local health economy has been tasked with producing a sustainability and transformation plan. A health economy is a system that controls and contributes to health-care resource and the effects of health services on its population. This includes commissioners, acute providers, primary care providers, community services, public health and the voluntary sector. Sustainability and transformation plans represent a shift in the way health care is planned for in England. The aim of each sustainability and transformation plan is to deliver care within existing resource limits by improving quality of care, developing new models of care and improving efficiency of care provision. The tight timescales for production of sustainability and transformation plans mean that in most cases there has been limited clinical engagement; as a result many clinicians have limited sight, understanding or ownership of the proposals within sustainability and transformation plans. As sustainability and transformation plans move into the implementation phase, this article explores the role of the clinician in the ongoing design and delivery of the local sustainability and transformation plans. By finding the common ground between the perspectives of the clinician, the commissioner and system leaders, the motivation of clinicians can be aligned with the ambitions of the sustainability and transformation plan. The common goal of a sustainability and transformation plan and the necessary collaboration required to make it successful is discussed. Ultimately, such translation is essential: clinicians are intelligent, adaptive and motivated individuals who must have a lead role in constructing and implementing plans that transform health and social care.

30 CFR 57.12067 - Installation of transformers.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of transformers. 57.12067 Section... Electricity Surface Only § 57.12067 Installation of transformers. Transformers shall be totally enclosed, or... wiring. ...

3D printed magnetic polymer composite transformers

Science.gov (United States)

Bollig, Lindsey M.; Hilpisch, Peter J.; Mowry, Greg S.; Nelson-Cheeseman, Brittany B.

2017-11-01

The possibility of 3D printing a transformer core using fused deposition modeling methods is explored. With the use of additive manufacturing, ideal transformer core geometries can be achieved in order to produce a more efficient transformer. In this work, different 3D printed settings and toroidal geometries are tested using a custom integrated magnetic circuit capable of measuring the hysteresis loop of a transformer. These different properties are then characterized, and it was determined the most effective 3D printed transformer core requires a high fill factor along with a high concentration of magnetic particulate.

Road Detection by Using a Generalized Hough Transform

Directory of Open Access Journals (Sweden)

Weifeng Liu

2017-06-01

Full Text Available Road detection plays key roles for remote sensing image analytics. Hough transform (HT is one very typical method for road detection, especially for straight line road detection. Although many variants of Hough transform have been reported, it is still a great challenge to develop a low computational complexity and time-saving Hough transform algorithm. In this paper, we propose a generalized Hough transform (i.e., Radon transform implementation for road detection in remote sensing images. Specifically, we present a dictionary learning method to approximate the Radon transform. The proposed approximation method treats a Radon transform as a linear transform, which then facilitates parallel implementation of the Radon transform for multiple images. To evaluate the proposed algorithm, we conduct extensive experiments on the popular RSSCN7 database for straight road detection. The experimental results demonstrate that our method is superior to the traditional algorithms in terms of accuracy and computing complexity.

Relation between time-temperature transformation and continuous heating transformation diagrams of metallic glassy alloys

International Nuclear Information System (INIS)

Louzguine-Luzgin, Dmitri V.; Inoue, Akihisa

2005-01-01

The time-temperature transformation (TTT) diagrams for the onset of devitrification of the Ge-Ni-La and Cu-Hf-Ti glassy alloys were calculated from the isothermal differential calorimetry data using an Arrhenius equation. The continuous heating transformation (CHT) diagrams for the onset of devitrification of the glassy alloys were subsequently recalculated from TTT diagrams. The recalculation method used for conversion of the TTT into CHT diagrams produces reasonable results and is not sensitive to the type of the devitrification reaction (polymorphous or primary transformation). The diagrams allow to perform a comparison of the stabilities of glassy alloys on a long-term scale. The relationship between these diagrams is discussed

Integrated magnetic transformer assembly

DEFF Research Database (Denmark)

2014-01-01

The present invention relates to an integrated magnetics transformer assembly comprising a first magnetically permeable core forming a first substantially closed magnetic flux path and a second magnetically permeable core forming a second substantially closed magnetic flux path. A first input...... inductor winding is wound around a first predetermined segment of the first magnetically permeable core and a second input inductor winding is wound around a first predetermined segment of the second magnetically permeable core. The integrated magnetics transformer assembly further comprises a first output......-winding of the first output inductor winding and the first half-winding of the second output inductor winding are configured to produce aligned, i.e. in the same direction, magnetic fluxes through the first substantially closed magnetic flux path. The integrated magnetics transformer assembly is well- suited for use...

How to transform local energy systems towards bioenergy? Three strategy models for transformation

International Nuclear Information System (INIS)

Martensson, Kjell; Westerberg, Karin

2007-01-01

During the last decades, the actors within the energy sector in Sweden-as well as in many other countries-have faced increasing demands to transform the energy system towards ecological sustainability. In Sweden these demands have led to numerous policies and economic incentives promoting the use of renewables (which in the Swedish discourse often also includes a connotation of 'indigenous energy sources'), and especially the promotion of bioenergy. To be successful, however, these policies and economic incentives need to be interpreted and adapted to different local contexts and translated into actual transformation processes. In Sweden the municipal authorities have played an important role as interpreters of such institutional frameworks and implementers of local transformation processes. In this article, we re-construct three transformation processes implemented by local municipal authorities, chiselling out the different strategy models developed through them. We argue that such re-constructions help to make visible the different and complex interactions between national institutional frameworks and local contexts as well as interactions within such local contexts. We hope that the strategy models presented can contribute to the understanding of the different kinds of local actions that can foster a further implementation of bioenergy into the energy system

Transforming Normal Programs by Replacement

NARCIS (Netherlands)

Bossi, Annalisa; Pettorossi, A.; Cocco, Nicoletta; Etalle, Sandro

1992-01-01

The replacement transformation operation, already defined in [28], is studied wrt normal programs. We give applicability conditions able to ensure the correctness of the operation wrt Fitting's and Kunen's semantics. We show how replacement can mimic other transformation operations such as thinning,

On fractional Fourier transform moments

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.

2000-01-01

Based on the relation between the ambiguity function represented in a quasi-polar coordinate system and the fractional power spectra, the fractional Fourier transform moments are introduced. Important equalities for the global second-order fractional Fourier transform moments are derived and their

Katedralskolen i Transformation

DEFF Research Database (Denmark)

2016-01-01

stadig mulige byggefelter, hvis anvendelse kan ommøblere funktioner, så det imødekommer nye undervisningsformer og det sociale liv vi har i dag. En ny tilbygning står på skolens ønskeliste. Således er skolen i fortsat transformation. I tegninger og modeller fremviser udstillingen konkurrenceforslag til...... nye tilbygninger til Katedralskolen, der fortsætter traditionen om transformation og som fortsætter fortætning af skolen og dermed af byen. Byggeprogrammet er blevet diskuteret på baggrund af brugerinterviews af Katedralskolens lærere og elever. Arkitekter fra Arkitekttegnestuen Kjær & Richter i...

In-situ characterization of transformation plasticity during an isothermal austenite-to-bainite phase transformation

Energy Technology Data Exchange (ETDEWEB)

Holzweissig, M.J., E-mail: martinh@mail.upb.de [University of Paderborn, Lehrstuhl fuer Werkstoffkunde (Materials Science), 33095 Paderborn (Germany); Canadinc, D., E-mail: dcanadinc@ku.edu.tr [Koc University, Advanced Materials Group, Department of Mechanical Engineering, 34450 Istanbul (Turkey); Maier, H.J., E-mail: hmaier@mail.upb.de [University of Paderborn, Lehrstuhl fuer Werkstoffkunde (Materials Science), 33095 Paderborn (Germany)

2012-03-15

This paper elucidates the stress-induced variant selection process during the isothermal austenite-to-bainite phase transformation in a tool steel. Specifically, a thorough set of experiments combining electron backscatter diffraction and in-situ digital image correlation (DIC) was carried out to establish the role of superimposed stress level on the evolution of transformation plasticity (TP) strains. The important finding is that TP increases concomitant with the superimposed stress level, and strain localization accompanies phase transformation at all stress levels considered. Furthermore, TP strain distribution within the whole material becomes more homogeneous with increasing stress, such that fewer bainitic variants are selected to grow under higher stresses, yielding a more homogeneous strain distribution. In particular, the bainitic variants oriented along [101] and [201] directions are favored to grow parallel to the loading axis and are associated with large TP strains. Overall, this very first in-situ DIC investigation of the austenite-to-bainite phase transformation in steels evidences the clear relationship between the superimposed stress level, variant selection, and evolution of TP strains. - Highlights: Black-Right-Pointing-Pointer Local variations of strain were observed by DIC throughout the phase transformation. Black-Right-Pointing-Pointer The study clearly established the role of the stress-induced variant selection. Black-Right-Pointing-Pointer Variant selection is a key parameter that governs distortion.

A new fractional wavelet transform

Science.gov (United States)

Dai, Hongzhe; Zheng, Zhibao; Wang, Wei

2017-03-01

The fractional Fourier transform (FRFT) is a potent tool to analyze the time-varying signal. However, it fails in locating the fractional Fourier domain (FRFD)-frequency contents which is required in some applications. A novel fractional wavelet transform (FRWT) is proposed to solve this problem. It displays the time and FRFD-frequency information jointly in the time-FRFD-frequency plane. The definition, basic properties, inverse transform and reproducing kernel of the proposed FRWT are considered. It has been shown that an FRWT with proper order corresponds to the classical wavelet transform (WT). The multiresolution analysis (MRA) associated with the developed FRWT, together with the construction of the orthogonal fractional wavelets are also presented. Three applications are discussed: the analysis of signal with time-varying frequency content, the FRFD spectrum estimation of signals that involving noise, and the construction of fractional Harr wavelet. Simulations verify the validity of the proposed FRWT.

Lecture notes on wavelet transforms

CERN Document Server

Debnath, Lokenath

2017-01-01

This book provides a systematic exposition of the basic ideas and results of wavelet analysis suitable for mathematicians, scientists, and engineers alike. The primary goal of this text is to show how different types of wavelets can be constructed, illustrate why they are such powerful tools in mathematical analysis, and demonstrate their use in applications. It also develops the required analytical knowledge and skills on the part of the reader, rather than focus on the importance of more abstract formulation with full mathematical rigor.  These notes differs from many textbooks with similar titles in that a major emphasis is placed on the thorough development of the underlying theory before introducing applications and modern topics such as fractional Fourier transforms, windowed canonical transforms, fractional wavelet transforms, fast wavelet transforms, spline wavelets, Daubechies wavelets, harmonic wavelets and non-uniform wavelets. The selection, arrangement, and presentation of the material in these ...

An n-dimensional pseudo-differential operator involving the Hankel ...

Indian Academy of Sciences (India)

ji =0 bji x. 2 ji +μ+1/2 i. (x−1 i ∂/∂xi )ri + ji. (x. −μ−1/2 i φ(x1,..., xn)). ⎞. ⎠ ,. (1.8) where the bji are constants depending only on μ. For i = 1, 2,..., n, let (xi , yi , zi ) ...

INTRODUCTION OF GENERALIZED LAPLACE-FRACTIONAL MELLIN TRANSFORM

OpenAIRE

V. D. Sharma*, M. M. Thakare

2016-01-01

In present era, Fractional Integral Transform plays an important role in various fields of mathematics and Technology. Mellin transform has an many application in navigations, correlaters, in area of statistics, probability and also solving in differential equation. Fractional Mellin transform is integral part of mathematical modeling method because of its scale invariance property. The aim of this paper is to generalization of Laplace-Fractional Mellin Transform. Analyticity theore...

Subband/Transform MATLAB Functions For Processing Images

Science.gov (United States)

Glover, D.

1995-01-01

SUBTRANS software is package of routines implementing image-data-processing functions for use with MATLAB*(TM) software. Provides capability to transform image data with block transforms and to produce spatial-frequency subbands of transformed data. Functions cascaded to provide further decomposition into more subbands. Also used in image-data-compression systems. For example, transforms used to prepare data for lossy compression. Written for use in MATLAB mathematical-analysis environment.

Transformation magneto-statics and illusions for magnets

Science.gov (United States)

Sun, Fei; He, Sailing

2014-10-01

Based on the form-invariant of Maxwell's equations under coordinate transformations, we extend the theory of transformation optics to transformation magneto-statics, which can design magnets through coordinate transformations. Some novel DC magnetic field illusions created by magnets (e.g. rescaling magnets, cancelling magnets and overlapping magnets) are designed and verified by numerical simulations. Our research will open a new door to designing magnets and controlling DC magnetic fields.

Efficient selection of banks of transformers

International Nuclear Information System (INIS)

Garcia G, Grester; De Armas T, Marcos A.

2009-01-01

This paper show a procedure to select the most profitable transformer banks in an specific service or in new investments with emphasis in the reduction of the operational losses, the cost in useful life, and the increase of the system efficiency using techniques of artificial intelligence. The method constitutes a tool that can be used in field conditions without invasive test and with data of easy acquisition according to the state of the art. The program was developed to analyze any type of transformers or transformer bank connection? single phase, three phase transformers or two or three transformers in symmetric or asymmetric configuration for three phase and single phase services. The economic analysis is made by the Cost of Cycle Life (CCV) of the analyzed configuration. As a case the results obtained in the gas station La Calzada of the Cienfuegos municipality is presented.

Transformation of the Zagreb urban region

Directory of Open Access Journals (Sweden)

Milan Ilić

2004-01-01

Full Text Available Several aspects of the transformation of theZagreb urban region are considered in this work: change in the regionćssize and form, socio-economic transformation, functional transformation andphysiognomic or morphological transformation. It was established that theregionćs form has changed: it is moving from the classic star-like form,characteristic of the early developmental phase of the urban region, to acircular form. The region has experienced evolution in the developmentalsense and reached a phase of absolute decentralization. The process oftransformation in the region is continuing at full pace, while onlyperipheral, mainly small and poorly linked settlements with an unfavorabledemographic balance and processes are lagging behind.

Supersymmetric reciprocal transformation and its applications

International Nuclear Information System (INIS)

Liu, Q. P.; Popowicz, Ziemowit; Tian Kai

2010-01-01

The supersymmetric analog of the reciprocal transformation is introduced. This is used to establish a transformation between one of the supersymmetric Harry Dym equations and the supersymmetric modified Korteweg-de Vries equation. The reciprocal transformation, as a Baecklund-type transformation between these two equations, is adopted to construct a recursion operator for the supersymmetric Harry Dym equation. By proper factorization of the recursion operator, a bi-Hamiltonian structure is found for the supersymmetric Harry Dym equation. Furthermore, a supersymmetric Kawamoto equation is proposed and is associated with the supersymmetric Sawada-Kotera equation. The recursion operator and odd bi-Hamiltonian structure of the supersymmetric Kawamoto equation are also constructed.

Radon transformation on reductive symmetric spaces:Support theorems

DEFF Research Database (Denmark)

Kuit, Job Jacob

2013-01-01

We introduce a class of Radon transforms for reductive symmetric spaces, including the horospherical transforms, and derive support theorems for these transforms. A reductive symmetric space is a homogeneous space G/H for a reductive Lie group G of the Harish-Chandra class, where H is an open sub...... is based on the relation between the Radon transform and the Fourier transform on G/H, and a Paley–Wiener-shift type argument. Our results generalize the support theorem of Helgason for the Radon transform on a Riemannian symmetric space....

A Review of Transformer Aging and Control Strategies

Energy Technology Data Exchange (ETDEWEB)

Gourisetti, Sri Nikhil Gup; Kirkham, Harold; Sivaraman, Deepak

2017-09-19

Transformer aging is an important challenge in power system. Distribution transformers themselves are minimally controllable, but smart meters provide excellent, new insights into electrical loads, which insights can be used to understand and mitigate transformer aging. The nature of transformer loads is changing with the integration of distributed energy resources (DERs) and electric vehicles (EVs). This paper first reviews factors that influence the aging of distribution transformers, including root causes of transformer failure. Existing and proposed load control methods are then discussed. A distribution model is introduced to help evaluate potential control methods.

Microprocessor Protection of Power Reducing Transformers

OpenAIRE

F. A. Romanuk; S. P. Korolev; M. S. Loman

2011-01-01

The paper contains analysis of advantages and disadvantages of existing differential protection terminals of power reducing transformers. The paper shows that there are good reasons to develop microprocessor protection of power reducing transformer which contains required functions and settings and which is based on Belarusian principles of relay protection system construction. The paper presents functional structure of microprocessor terminal of power reducing transformer which is developed. 

Householder transformations and optimal linear combinations

Science.gov (United States)

Decell, H. P., Jr.; Smiley, W., III

1974-01-01

Several theorems related to the Householder transformation and separability criteria are proven. Orthogonal transformations, topology, divergence, mathematical matrices, and group theory are discussed.

A reversible transform for seismic data processing

International Nuclear Information System (INIS)

Burnett, William A; Ferguson, Robert J

2011-01-01

We use the nonstationary equivalent of the Fourier shift theorem to derive a general one-dimensional integral transform for the application and removal of certain seismic data processing steps. This transform comes from the observation that many seismic data processing steps can be viewed as nonstationary shifts. The continuous form of the transform is exactly reversible, and the discrete form provides a general framework for unitary and pseudounitary imaging operators. Any processing step which can be viewed as a nonstationary shift in any domain is a special case of this transform. Nonstationary shifts generally produce coordinate distortions between input and output domains, and those that preserve amplitudes do not conserve the energy of the input signal. The nonstationary frequency distortions, time distortions and nonphysical energy changes inherent to such operations are predicted and quantified by this transform. Processing steps of this type are conventionally implemented using interpolation operators to map discrete data values between input and output coordinate frames. Although not explicitly derived to perform interpolation, the transform here assumes the Fourier basis to predict values of the input signal between sampling locations. We demonstrate how interpolants commonly used in seismic data processing and imaging approximate the proposed method. We find that our transform is equivalent to the conventional sinc interpolant with no truncation. Once the transform is developed, we demonstrate its numerical implementation by matrix–vector multiplication. As an example, we use our transform to apply and remove normal moveout

Anharmonic oscillator and Bogoliubov transformation

International Nuclear Information System (INIS)

Pattnayak, G.C.; Torasia, S.; Rath, B.

1990-01-01

The anharmonic oscillator occupies a cornerstone in many problems in physics. It was observed that none of the authors have tested Bogoliubov transformation to study anharmonic oscillator. The groundstate energy of the anharmonic oscillator is studied using Bogoliubov transformation and the results presented. (author)

Organizational Learning through Transformational Leadership

Science.gov (United States)

Imran, Muhammad Kashif; Ilyas, Muhammad; Aslam, Usman; Ubaid-Ur-Rahman

2016-01-01

Purpose: The transformation of firms from resource-based-view to knowledge-based-view has extended the importance of organizational learning. Thus, this study aims to develop an organizational learning model through transformational leadership with indirect effect of knowledge management process capability and interactive role of…

Cayley transform on Stiefel manifolds

Science.gov (United States)

Macías-Virgós, Enrique; Pereira-Sáez, María José; Tanré, Daniel

2018-01-01

The Cayley transform for orthogonal groups is a well known construction with applications in real and complex analysis, linear algebra and computer science. In this work, we construct Cayley transforms on Stiefel manifolds. Applications to the Lusternik-Schnirelmann category and optimization problems are presented.

Managing stakeholders in transformational government

DEFF Research Database (Denmark)

Reinwald, Anja Kaldahl; Kræmmergaard, Pernille

2012-01-01

a stakeholder perspective. The paper reports how they succeeded in involving the most important stakeholders in the process of reaching transformational government. Finally the paper offers six lessons learned, based on the case study, about how to manage the involved stakeholders to reach transformational...

Genetic transformation of forest trees

African Journals Online (AJOL)

Admin

In this review, the recent progress on genetic transformation of forest trees were discussed. Its described also, different applications of genetic engineering for improving forest trees or understanding the mechanisms governing genes expression in woody plants. Key words: Genetic transformation, transgenic forest trees, ...

Computing Instantaneous Frequency by normalizing Hilbert Transform

Science.gov (United States)

Huang, Norden E.

2005-05-31

This invention presents Normalized Amplitude Hilbert Transform (NAHT) and Normalized Hilbert Transform(NHT), both of which are new methods for computing Instantaneous Frequency. This method is designed specifically to circumvent the limitation set by the Bedorsian and Nuttal Theorems, and to provide a sharp local measure of error when the quadrature and the Hilbert Transform do not agree. Motivation for this method is that straightforward application of the Hilbert Transform followed by taking the derivative of the phase-angle as the Instantaneous Frequency (IF) leads to a common mistake made up to this date. In order to make the Hilbert Transform method work, the data has to obey certain restrictions.

Hough transform search for continuous gravitational waves

International Nuclear Information System (INIS)

Krishnan, Badri; Papa, Maria Alessandra; Sintes, Alicia M.; Schutz, Bernard F.; Frasca, Sergio; Palomba, Cristiano

2004-01-01

This paper describes an incoherent method to search for continuous gravitational waves based on the Hough transform, a well-known technique used for detecting patterns in digital images. We apply the Hough transform to detect patterns in the time-frequency plane of the data produced by an earth-based gravitational wave detector. Two different flavors of searches will be considered, depending on the type of input to the Hough transform: either Fourier transforms of the detector data or the output of a coherent matched-filtering type search. We present the technical details for implementing the Hough transform algorithm for both kinds of searches, their statistical properties, and their sensitivities

The radon transform. Theory and implementation

International Nuclear Information System (INIS)

Toft, P.

1996-01-01

The subject of this Ph.D. thesis is the mathematical Radon transform, which is well suited for curve detection in digital images, and for reconstruction of tomography images. The thesis is divided into two main parts. Part I describes the Radon- and the Hough-transform and especially their discrete approximations with respect to curve parameter detection in digital images. The sampling relationships of the Radon transform is reviewed from a digital signal processing point of view. The discrete Radon transform is investigated for detection of curves, and aspects regarding the performance of the Radon transform assuming various types of noise is covered. Furthermore, a new fast scheme for estimating curve parameters is presented. Part II of the thesis describes the inverse Radon transform in 2D and 3D with focus on reconstruction of tomography images. Some of the direct reconstruction schemes are analyzed, including their discrete implementation. Furthermore, several iterative reconstruction schemes based on linear algebra are reviewed and applied for reconstruction of Positron Emission Tomography (PET) images. A new and very fast implementation of 2D iterative reconstruction methods is devised. In a more practical oriented chapter, the noise in PET images is modelled from a very large number of measurements. Several packagers for Radon- and Hough-transform based curve detection and direct/iterative 2D and 3D reconstruction have been developed and provided for free. (au) 140 refs

A relationship between Gel'fand-Levitan and Marchenko kernels

International Nuclear Information System (INIS)

Kirst, T.; Von Geramb, H.V.; Amos, K.A.

1989-01-01

An integral equation which relates the output kernels of the Gel'fand-Levitan and Marchenko inverse scattering equations is specified. Structural details of this integral equation are studied when the S-matrix is a rational function, and the output kernels are separable in terms of Bessel, Hankel and Jost solutions. 4 refs

Toeplitz operators on higher Cauchy-Riemann spaces

Czech Academy of Sciences Publication Activity Database

Engliš, Miroslav; Zhang, G.

2017-01-01

Roč. 22, č. 22 (2017), s. 1081-1116 ISSN 1431-0643 Institutional support: RVO:67985840 Keywords : Toeplitz operator * Hankel operator * Cauchy-Riemann operators Subject RIV: BA - General Math ematics OBOR OECD: Pure math ematics Impact factor: 0.800, year: 2016 https://www. math .uni-bielefeld.de/documenta/vol-22/32.html

Insight into the Effects of Reinforcement Shape on Achieving Continuous Martensite Transformation in Phase Transforming Matrix Composites

Science.gov (United States)

Zhang, Xudong; Ren, Junqiang; Wang, Xiaofei; Zong, Hongxiang; Cui, Lishan; Ding, Xiangdong

2017-12-01

A continuous martensite transformation is indispensable for achieving large linear superelasticity and low modulus in phase transforming metal-based composites. However, determining how to accurately condition the residual martensite in a shape memory alloy matrix though the reinforcement shape to achieve continuous martensite transformation has been a challenge. Here, we take the finite element method to perform a comparative study of the effects of nanoinclusion shape on the interaction and martensite phase transformation in this new composite. Two typical samples are compared: one reinforced by metallic nanowires and the other by nanoparticles. We find that the residual martensite within the shape memory alloy matrix after a pretreatment can be tailored by the reinforcement shape. In particular, our results show that the shape memory alloy matrix can retain enough residual martensite phases to achieve continuous martensite transformation in the subsequent loading when the aspect ratio of nanoreinforcement is larger than 20. In contrast, the composites reinforced with spherical or low aspect ratio reinforcement show a typical nonlinear superelasticity as a result of a low stress transfer-induced discontinuous martensite transformation within the shape memory alloy matrix.

Study of low insertion loss and miniaturization wavelet transform and inverse transform processor using SAW devices.

Science.gov (United States)

Jiang, Hua; Lu, Wenke; Zhang, Guoan

2013-07-01

In this paper, we propose a low insertion loss and miniaturization wavelet transform and inverse transform processor using surface acoustic wave (SAW) devices. The new SAW wavelet transform devices (WTDs) use the structure with two electrode-widths-controlled (EWC) single phase unidirectional transducers (SPUDT-SPUDT). This structure consists of the input withdrawal weighting interdigital transducer (IDT) and the output overlap weighting IDT. Three experimental devices for different scales 2(-1), 2(-2), and 2(-3) are designed and measured. The minimum insertion loss of the three devices reaches 5.49dB, 4.81dB, and 5.38dB respectively which are lower than the early results. Both the electrode width and the number of electrode pairs are reduced, thus making the three devices much smaller than the early devices. Therefore, the method described in this paper is suitable for implementing an arbitrary multi-scale low insertion loss and miniaturization wavelet transform and inverse transform processor using SAW devices. Copyright © 2013 Elsevier B.V. All rights reserved.

Considerations Concerning Matrix Diagram Transformations Associated with Mathematical Model Study of a Three-phase Transformer

Directory of Open Access Journals (Sweden)

Mihaela Poienar

2014-09-01

Full Text Available The clock hour figure mathematical model of a threephase transformer can be expressed, in the most plain form, through a 3X3 square matrix, called code matrix. The lines position reflect the modification in the high voltage windings terminal and the columns position reflect the modification in the low voltage winding terminal. The main changes on the transformer winding terminal are: the circular permutation of connection between windings; terminal supply reversal; reverse direction for the phase winding wrapping; reversal the beginning with the end for a phase winding; the connection conversion from N in Z between phase winding or inverse. The analytical form of these changes actually affect the configuration of the mathematical model expressed through a transformations diagram proposed and analyzed in two ways: bipolar version and unipolar version (fanwise. In the end of the paper are presented about the practical exploitation of the transformations diagram.

Implementation of 2D Discrete Wavelet Transform by Number Theoretic Transform and 2D Overlap-Save Method

Directory of Open Access Journals (Sweden)

Lina Yang

2014-01-01

Full Text Available To reduce the computation complexity of wavelet transform, this paper presents a novel approach to be implemented. It consists of two key techniques: (1 fast number theoretic transform(FNTT In the FNTT, linear convolution is replaced by the circular one. It can speed up the computation of 2D discrete wavelet transform. (2 In two-dimensional overlap-save method directly calculating the FNTT to the whole input sequence may meet two difficulties; namely, a big modulo obstructs the effective implementation of the FNTT and a long input sequence slows the computation of the FNTT down. To fight with such deficiencies, a new technique which is referred to as 2D overlap-save method is developed. Experiments have been conducted. The fast number theoretic transform and 2D overlap-method have been used to implement the dyadic wavelet transform and applied to contour extraction in pattern recognition.

QR code-based non-linear image encryption using Shearlet transform and spiral phase transform

Science.gov (United States)

Kumar, Ravi; Bhaduri, Basanta; Hennelly, Bryan

2018-02-01

In this paper, we propose a new quick response (QR) code-based non-linear technique for image encryption using Shearlet transform (ST) and spiral phase transform. The input image is first converted into a QR code and then scrambled using the Arnold transform. The scrambled image is then decomposed into five coefficients using the ST and the first Shearlet coefficient, C1 is interchanged with a security key before performing the inverse ST. The output after inverse ST is then modulated with a random phase mask and further spiral phase transformed to get the final encrypted image. The first coefficient, C1 is used as a private key for decryption. The sensitivity of the security keys is analysed in terms of correlation coefficient and peak signal-to noise ratio. The robustness of the scheme is also checked against various attacks such as noise, occlusion and special attacks. Numerical simulation results are shown in support of the proposed technique and an optoelectronic set-up for encryption is also proposed.

Numerical study on identification of transfer functions in a feedback system and model reduction

International Nuclear Information System (INIS)

Kishida, Kuniharu

1997-01-01

Identification of transfer function matrices in a feedback system is discussed by using the singular value decomposition of Hankel matrix from the viewpoint of inverse problems. A method of model reduction is considered, and selection criteria are proposed for identification of them. Transformation formula between open loop and closed loop transfer function matrices are determined from the feedback loop structure, and they are needed for identification of open loop transfer function matrices under such a condition where the feedback system is in a minimum phase. Though the identifiability of open loop transfer function matrices can be examined in the framework of innovation model equivalent to the feedback system, there are pole-zero cancellations in the identification of them. The method to reduce a model order of an open loop transfer function is discussed by using the singular value decomposition of a gramian given by the open loop transfer function with higher degree. To check reliability of the present algorithm, a simulation study is performed for an example. (author)

Semi-analytical solution of flow to a well in an unconfined-fractured aquifer system separated by an aquitard

Science.gov (United States)

Sedghi, Mohammad M.; Samani, Nozar; Barry, D. A.

2018-04-01

Semi-analytical solutions are presented for flow to a well in an extensive homogeneous and anisotropic unconfined-fractured aquifer system separated by an aquitard. The pumping well is of infinitesimal radius and screened in either the overlying unconfined aquifer or the underlying fractured aquifer. An existing linearization method was used to determine the watertable drainage. The solution was obtained via Laplace and Hankel transforms, with results calculated by numerical inversion. The main findings are presented in the form of non-dimensional drawdown-time curves, as well as scaled sensitivity-dimensionless time curves. The new solution permits determination of the influence of fractures, matrix blocks and watertable drainage parameters on the aquifer drawdown. The effect of the aquitard on the drawdown response of the overlying unconfined aquifer and the underlying fractured aquifer was also explored. The results permit estimation of the unconfined and fractured aquifer hydraulic parameters via type-curve matching or coupling of the solution with a parameter estimation code. The solution can also be used to determine aquifer hydraulic properties from an optimal pumping test set up and duration.

Multivariate prediction, de Branges spaces, and related extension and inverse problems

CERN Document Server

Arov, Damir Z

2018-01-01

This monograph deals primarily with the prediction of vector valued stochastic processes that are either weakly stationary, or have weakly stationary increments, from finite segments of their past. The main focus is on the analytic counterpart of these problems, which amounts to computing projections onto subspaces of a Hilbert space of p x 1 vector valued functions with an inner product that is defined in terms of the p x p matrix valued spectral density of the process. The strategy is to identify these subspaces as vector valued de Branges spaces and then to express projections in terms of the reproducing kernels of these spaces and/or in terms of a generalized Fourier transform that is obtained from the solution of an associated inverse spectral problem. Subsequently, the projection of the past onto the future and the future onto the past is interpreted in terms of the range of appropriately defined Hankel operators and their adjoints, and, in the last chapter, assorted computations are carried out for rat...

Individually Watermarked Information Distributed Scalable by Modified Transforms

Science.gov (United States)

2009-10-01

inverse of the secret transform is needed. Each trusted recipient has a unique inverse transform that is similar to the inverse of the original...transform. The elements of this individual inverse transform are given by the individual descrambling key. After applying the individual inverse ... transform the retrieved image is embedded with a recipient individual watermark. Souce 1 I Decode IW1 Decode IW2 Decode ISC Scramb K Recipient 3

Travel and Adult Transformative Learning

Science.gov (United States)

Lindstrom, Steven K.

2011-01-01

This phenomenological research study examines the lived experience of individual adult transformation in the context of travel. Adults throughout history have experienced profound personal and perception changes as a result of significant travel events. Transformative learning occurs through experience, crisis, and reflection, all of which are…

Experiments with a Differential Transformer

Science.gov (United States)

Aguilar, Horacio Munguía

2016-01-01

An experiment with an electric transformer based on single coils shows how electromagnetic induction changes when the magnetic coupling between coils is adjusted. This transformer has two secondary outputs which are taken differentially. This is the basis for a widely used position transducer known as LVDT.

tt: Treelet transform with Stata

DEFF Research Database (Denmark)

Gorst-Rasmussen, Anders

2012-01-01

for much of the variation in the original data. However, in contrast to principal component analysis, the treelet transform produces sparse components. This can greatly simplify interpretation. I describe the tt Stata add-on for performing the treelet transform. The add-on includes a Mata implementation...

Cotton transformation via pollen tube pathway.

Science.gov (United States)

Wang, Min; Zhang, Baohong; Wang, Qinglian

2013-01-01

Although many gene transfer methods have been employed for successfully obtaining transgenic cotton, the major constraint in cotton improvement is the limitation of genotype because the majority of transgenic methods require plant regeneration from a single transformed cell which is limited by cotton tissue culture. Comparing with other plant species, it is difficult to induce plant regeneration from cotton; currently, only a limited number of cotton cultivars can be cultured for obtaining regenerated plants. Thus, development of a simple and genotype-independent genetic transformation method is particularly important for cotton community. In this chapter, we present a simple, cost-efficient, and genotype-independent cotton transformation method-pollen tube pathway-mediated transformation. This method uses pollen tube pathway to deliver transgene into cotton embryo sacs and then insert foreign genes into cotton genome. There are three major steps for pollen tube pathway-mediated genetic transformation, which include injection of -foreign genes into pollen tube, integration of foreign genes into plant genome, and selection of transgenic plants.

Electro-Optical Imaging Fourier-Transform Spectrometer

Science.gov (United States)

Chao, Tien-Hsin; Zhou, Hanying

2006-01-01

An electro-optical (E-O) imaging Fourier-transform spectrometer (IFTS), now under development, is a prototype of improved imaging spectrometers to be used for hyperspectral imaging, especially in the infrared spectral region. Unlike both imaging and non-imaging traditional Fourier-transform spectrometers, the E-O IFTS does not contain any moving parts. Elimination of the moving parts and the associated actuator mechanisms and supporting structures would increase reliability while enabling reductions in size and mass, relative to traditional Fourier-transform spectrometers that offer equivalent capabilities. Elimination of moving parts would also eliminate the vibrations caused by the motions of those parts. Figure 1 schematically depicts a traditional Fourier-transform spectrometer, wherein a critical time delay is varied by translating one the mirrors of a Michelson interferometer. The time-dependent optical output is a periodic representation of the input spectrum. Data characterizing the input spectrum are generated through fast-Fourier-transform (FFT) post-processing of the output in conjunction with the varying time delay.

Microprocessor Protection of Power Reducing Transformers

Directory of Open Access Journals (Sweden)

F. A. Romanuk

2011-01-01

Full Text Available The paper contains analysis of advantages and disadvantages of existing differential protection terminals of power reducing transformers. The paper shows that there are good reasons to develop microprocessor protection of power reducing transformer which contains required functions and settings and which is based on Belarusian principles of relay protection system construction. The paper presents functional structure of microprocessor terminal of power reducing transformer which is developed. 

A Method of Function Space for Vertical Impedance Function of a Circular Rigid Foundation on a Transversely Isotropic Ground

Directory of Open Access Journals (Sweden)

Morteza Eskandari-Ghadi

2014-06-01

Full Text Available This paper is concerned with investigation of vertical impedance function of a surface rigid circular foundation resting on a semi-infinite transversely isotropic alluvium. To this end, the equations of motion in cylindrical coordinate system, which because of axissymmetry are two coupled equations, are converted into one partial differential equation using a method of potential function. The governing partial differential equation for the potential function is solved via implementing Hankel integral transforms in radial direction. The vertical and radial components of displacement vector are determined with the use of transformed displacement-potential function relationships. The mixed boundary conditions at the surface are satisfied by specifying the traction between the rigid foundation and the underneath alluvium in a special function space introduced in this paper, where the vertical displacements are forced to satisfy the rigid boundary condition. Through exercising these restraints, the normal traction and then the vertical impedance function are obtained. The results are then compared with the existing results in the literature for the simpler case of isotropic half-space, which shows an excellent agreement. Eventually, the impedance functions are presented in terms of dimensionless frequency for different materials. The method presented here may be used to obtain the impedance function in any other direction as well as in buried footing in layered media.

The Laplace transformation of adjoint transport equations

International Nuclear Information System (INIS)

Hoogenboom, J.E.

1985-01-01

A clarification is given of the difference between the equation adjoint to the Laplace-transformed time-dependent transport equation and the Laplace-transformed time-dependent adjoint transport equation. Proper procedures are derived to obtain the Laplace transform of the instantaneous detector response. (author)

Gabor transform and Zak transform with rational oversampling

NARCIS (Netherlands)

Bastiaans, M.J.; Ramponi, G.; Sicuranza, G.L.; Carrato, S.; Marsi, S.

1996-01-01

Gabor's expansion of a signal into a set of shifted and modulated versions of an elementary signal is introduced, along with the inverse operation, i.e. the Gabor transform, which uses a window function that is related to the elementary signal and with the help of which Gabor's expansion

Graph transformation tool contest 2008

NARCIS (Netherlands)

Rensink, Arend; van Gorp, Pieter

This special section is the outcome of the graph transformation tool contest organised during the Graph-Based Tools (GraBaTs) 2008 workshop, which took place as a satellite event of the International Conference on Graph Transformation (ICGT) 2008. The contest involved two parts: three “off-line case

Explorations in statistics: the log transformation.

Science.gov (United States)

Curran-Everett, Douglas

2018-06-01

Learning about statistics is a lot like learning about science: the learning is more meaningful if you can actively explore. This thirteenth installment of Explorations in Statistics explores the log transformation, an established technique that rescales the actual observations from an experiment so that the assumptions of some statistical analysis are better met. A general assumption in statistics is that the variability of some response Y is homogeneous across groups or across some predictor variable X. If the variability-the standard deviation-varies in rough proportion to the mean value of Y, a log transformation can equalize the standard deviations. Moreover, if the actual observations from an experiment conform to a skewed distribution, then a log transformation can make the theoretical distribution of the sample mean more consistent with a normal distribution. This is important: the results of a one-sample t test are meaningful only if the theoretical distribution of the sample mean is roughly normal. If we log-transform our observations, then we want to confirm the transformation was useful. We can do this if we use the Box-Cox method, if we bootstrap the sample mean and the statistic t itself, and if we assess the residual plots from the statistical model of the actual and transformed sample observations.

Performance Comparison and Selection of Transformer Fluid

Directory of Open Access Journals (Sweden)

Lu Yang

2016-01-01

Full Text Available Transformer fluid directly affects the working state of the components and the cooling efficiency of transformer. There are three kinds of transformer fluid used for electric locomotive, EMU and suburban rail vehicles: mineral oil, silicone liquid and synthetic ester based insulating oil. In this paper, the three kinds of oil are compared from the fire safety, environmental protection, reliability and low maintenance. It provides a strong basis for the selection of transformer fluid. By comprehensive analysis, synthetic ester based insulating oil can completely replace mineral oil and silicone liquid. With rail transport safety and environmental protection standards improving, synthetic ester based insulating oil will be the best choice for transformer.

A First-Order One-Pass CPS Transformation

DEFF Research Database (Denmark)

Danvy, Olivier; Nielsen, Lasse Reichstein

2002-01-01

We present a new transformation of call-by-value lambdaterms into continuation-passing style (CPS). This transformation operates in one pass and is both compositional and first-order. Because it operates in one pass, it directly yields compact CPS programs that are comparable to what one would...... write by hand. Because it is compositional, it allows proofs by structural induction. Because it is first-order, reasoning about it does not require the use of a logical relation. This new CPS transformation connects two separate lines of research. It has already been used to state a new and simpler...... correctness proof of a direct-style transformation, and to develop a new and simpler CPS transformation of control-flow information....

Phase transformation of dental zirconia following artificial aging.

Science.gov (United States)

Lucas, Thomas J; Lawson, Nathaniel C; Janowski, Gregg M; Burgess, John O

2015-10-01

Low-temperature degradation (LTD) of yttria-stabilized zirconia can produce increased surface roughness with a concomitant decrease in strength. This study determined the effectiveness of artificial aging (prolonged boiling/autoclaving) to induce LTD of Y-TZP (yttria-tetragonal zirconia-polycrystals) and used artificial aging for transformation depth progression analyses. The null hypothesis is aging techniques tested produce the same amount of transformation, transformation is not time/temperature dependent and LTD causes a constant transformation throughout the Y-TZP samples. Dental-grade Y-TZP samples were randomly divided into nine subgroups (n = 5): as received, 3.5 and 7 day boiling, 1 bar autoclave (1, 3, 5 h), and 2 bar autoclave (1, 3, 5 h). A 4-h boil treatment (n = 2) was performed post-experiment for completion of data. Transformation was measured using traditional X-ray diffraction and low-angle X-ray diffraction. The fraction of t → m transformation increased with aging time. The 3.5 day boil and 2 bar 5 h autoclave produced similar transformation results, while the 7 day boiling treatment revealed the greatest transformation. The surface layer of the aged specimen underwent the most transformation while all samples displayed decreasing transformation with depth. Surface transformation was evident, which can lead to rougher surfaces and increased wear of opposing dentition/materials. Therefore, wear studies addressing LTD of Y-TZP are needed utilizing accelerated aging. © 2014 Wiley Periodicals, Inc.

Basic Characterization of Natural Transformation in a Highly Transformable Haemophilus parasuis Strain SC1401

Science.gov (United States)

Dai, Ke; He, Lvqin; Chang, Yung-Fu; Cao, Sanjie; Zhao, Qin; Huang, Xiaobo; Wu, Rui; Huang, Yong; Yan, Qigui; Han, Xinfeng; Ma, Xiaoping; Wen, Xintian; Wen, Yiping

2018-01-01

Haemophilus parasuis causes Glässer's disease and pneumonia, incurring serious economic losses in the porcine industry. In this study, natural competence was investigated in H. parasuis. We found competence genes in H. parasuis homologous to ones in Haemophilus influenzae and a high consensus battery of Sxy-dependent cyclic AMP (cAMP) receptor protein (CRP-S) regulons using bioinformatics. High rates of natural competence were found from the onset of stationary-phase growth condition to mid-stationary phase (OD600 from 0.29 to 1.735); this rapidly dropped off as cells reached mid-stationary phase (OD600 from 1.735 to 1.625). As a whole, bacteria cultured in liquid media were observed to have lower competence levels than those grown on solid media plates. We also revealed that natural transformation in this species is stable after 200 passages and is largely dependent on DNA concentration. Transformation competition experiments showed that heterogeneous DNA cannot outcompete intraspecific natural transformation, suggesting an endogenous uptake sequence or other molecular markers may be important in differentiating heterogeneous DNA. We performed qRT-PCR targeting multiple putative competence genes in an effort to compare bacteria pre-cultured in TSB++ vs. TSA++ and SC1401 vs. SH0165 to determine expression profiles of the homologs of competence-genes in H. influenzae. Taken together, this study is the first to investigate natural transformation in H. parasuis based on a highly naturally transformable strain SC1401. PMID:29473023

Metamaterial-enabled transformation optics

Science.gov (United States)

Landy, Nathan

Transformation Optics is a design methodology that uses the form invariance of Maxwell's equations to distort electromagnetic fields. This distortion is imposed on a region of space by mimicking a curvilinear coordinate system with prescribed magnetoelectric material parameters. By simply specifying the correct coordinate transformation, researchers have created such exotic devices as invisibility cloaks, ``perfect'' lenses, and illusion devices. Unfortunately, these devices typically require correspondingly exotic material parameters that do not occur in Nature. Researchers have therefore turned to complex artificial media known as metamaterials to approximate the desired responses. However, the metamaterial design process is complex, and there are limitations on the responses that they achieve. In this dissertation, we explore both the applicability and limitations of metamaterials in Transformation Optics design. We begin in Chapter 2 by investigating the freedoms available to use in the transformation optics design process itself. We show that quasi-conformal mappings may be used to alleviate some of the complexity of material design in both two- and three-dimensional design. We then go on in Chapter 3 to apply this method to the design of a transformation-optics modified optic. We show that even a highly-approximate implementation of such a lens would retain many of the key performance feautures that we would expect from a full material prescription. However, the approximations made in the design of our lens may not be valid in other areas of transformation optical design. For instance, the high-frequency approximations of our lens design ignore the effects of impedance mismatch, and the approximation is not valid when the material parameters vary on the order of a wavelength. Therefore, in Chapter 4 we use other freedoms available to us to design a full-parameter cloak of invisibility. By tailoring the electromagnetic environment of our cloak, we are able to

30 CFR 56.12068 - Locking transformer enclosures.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Locking transformer enclosures. 56.12068 Section 56.12068 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... § 56.12068 Locking transformer enclosures. Transformer enclosures shall be kept locked against...

30 CFR 57.12068 - Locking transformer enclosures.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Locking transformer enclosures. 57.12068 Section 57.12068 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Electricity Surface Only § 57.12068 Locking transformer enclosures. Transformer enclosures shall be kept...

Radon-Wigner transform for optical field analysis

NARCIS (Netherlands)

Alieva, T.; Bastiaans, M.J.; Nijhawan, O.P.; Gupta, A.K.; Musla, A.K.; Singh, Kehar

1998-01-01

The Radon-Wigner transform, associated with the intensity distribution in the fractional Fourier transform system, is used for the analysis of complex structures of coherent as well as partially coherent optical fields. The application of the Radon-Wigner transform to the analysis of fractal fields

Optimal transformations for categorical autoregressive time series

NARCIS (Netherlands)

Buuren, S. van

1996-01-01

This paper describes a method for finding optimal transformations for analyzing time series by autoregressive models. 'Optimal' implies that the agreement between the autoregressive model and the transformed data is maximal. Such transformations help 1) to increase the model fit, and 2) to analyze

Finite anticanonical transformations in field-antifield formalism

Energy Technology Data Exchange (ETDEWEB)

Batalin, Igor A.; Tyutin, Igor V. [P.N. Lebedev Physical Institute, Moscow (Russian Federation); Tomsk State Pedagogical University, Tomsk (Russian Federation); Lavrov, Peter M. [Tomsk State Pedagogical University, Tomsk (Russian Federation); National Research Tomsk State University, Tomsk (Russian Federation)

2015-06-15

We study the role of arbitrary (finite) anticanonical transformations in the field-antifield formalism and the gauge-fixing procedure based on the use of these transformations. The properties of the generating functionals of the Green functions subjected to finite anticanonical transformations are considered. (orig.)

On the inverse transform of Laplace transforms that contain (products of) the parabolic cylinder function

NARCIS (Netherlands)

Veestraeten, D.

2015-01-01

The Laplace transforms of the transition probability density and distribution functions for the Ornstein-Uhlenbeck process contain the product of two parabolic cylinder functions, namely Dv(x)Dv(y) and Dv(x)Dv−1(y), respectively. The inverse transforms of these products have as yet not been

Limited-angle three-dimensional reconstructions using Fourier transform iterations and Radon transform iterations

International Nuclear Information System (INIS)

Tam, K.C.; Perez-Mendez, V.

1981-01-01

The principles of limited-angle reconstruction of space-limited objects using the concepts of allowed cone and missing cone in Fourier space are discussed. The distortion of a point source resulting from setting the Fourier components in the missing cone to zero has been calculated mathematically, and its bearing on the convergence of an iteration scheme involving Fourier transforms has been analyzed in detail. it was found that the convergence rate is fairly insensitive to the position of the point source within the boundary of the object, apart from an edge effect which tends to enhance some parts of the boundary in reconstructing the object. Another iteration scheme involving Radon transforms was introduced and compared to the Fourier transform method in such areas as root mean square error, stability with respect to noise, and computer reconstruction time

Limited-angle 3-D reconstructions using Fourier transform iterations and Radon transform iterations

International Nuclear Information System (INIS)

Tam, K.C.; Perez-Mendez, V.

1979-12-01

The principles of limited-angle reconstruction of space-limited objects using the concepts of allowed cone and missing cone in Fourier space are discussed. The distortion of a point source resulting from setting the Fourier components in the missing cone to zero was calculated mathematically, and its bearing on the convergence of an iteration scheme involving Fourier transforms was analyzed in detail. It was found that the convergence rate is fairly insensitive to the position of the point source within the boundary of the object, apart from an edge effect that tends to enhance some parts of the boundary in reconstructing the object. Another iteration scheme involving Radon transforms was introduced and compared to the Fourier transform method in such areas as root mean square error, stability with respect to noise, and computer reconstruction time. 8 figures, 2 tables

Mindfulness as substitute for transformational leadership

OpenAIRE

Kroon, B.; van Woerkom, M.; Menting, Charlotte

2017-01-01

Purpose Transformational leaders spark the intrinsic motivation of employees, thereby stimulating their extra-role performance. However, not all employees are lucky enough to have a transformational leader. The purpose of this paper is to investigate to what extent mindfulness can function as a substitute for transformational leadership. By being attentive to and aware of what is taking place in the present, mindfulness provides employees with a source of intrinsic motivation that lies within...

Medical image compression with fast Hartley transform

International Nuclear Information System (INIS)

Paik, C.H.; Fox, M.D.

1988-01-01

The purpose of data compression is storage and transmission of images with minimization of memory for storage and bandwidth for transmission, while maintaining robustness in the presence of transmission noise or storage medium errors. Here, the fast Hartley transform (FHT) is used for transformation and a new thresholding method is devised. The FHT is used instead of the fast Fourier transform (FFT), thus providing calculation at least as fast as that of the fastest algorithm of FFT. This real numbered transform requires only half the memory array space for saving of transform coefficients and allows for easy implementation on very large-scale integrated circuits because of the use of the same formula for both forward and inverse transformation and the conceptually straightforward algorithm. Threshold values were adaptively selected according to the correlation factor of each block of equally divided blocks of the image. Therefore, this approach provided a coding scheme that included maximum information with minimum image bandwidth. Overall, the results suggested that the Hartley transform adaptive thresholding approach results in improved fidelity, shorter decoding time, and greater robustness in the presence of noise than previous approaches

Quantum decoration transformation for spin models

Energy Technology Data Exchange (ETDEWEB)

Braz, F.F.; Rodrigues, F.C.; Souza, S.M. de; Rojas, Onofre, E-mail: ors@dfi.ufla.br

2016-09-15

It is quite relevant the extension of decoration transformation for quantum spin models since most of the real materials could be well described by Heisenberg type models. Here we propose an exact quantum decoration transformation and also showing interesting properties such as the persistence of symmetry and the symmetry breaking during this transformation. Although the proposed transformation, in principle, cannot be used to map exactly a quantum spin lattice model into another quantum spin lattice model, since the operators are non-commutative. However, it is possible the mapping in the “classical” limit, establishing an equivalence between both quantum spin lattice models. To study the validity of this approach for quantum spin lattice model, we use the Zassenhaus formula, and we verify how the correction could influence the decoration transformation. But this correction could be useless to improve the quantum decoration transformation because it involves the second-nearest-neighbor and further nearest neighbor couplings, which leads into a cumbersome task to establish the equivalence between both lattice models. This correction also gives us valuable information about its contribution, for most of the Heisenberg type models, this correction could be irrelevant at least up to the third order term of Zassenhaus formula. This transformation is applied to a finite size Heisenberg chain, comparing with the exact numerical results, our result is consistent for weak xy-anisotropy coupling. We also apply to bond-alternating Ising–Heisenberg chain model, obtaining an accurate result in the limit of the quasi-Ising chain.

Finite element simulation of piezoelectric transformers.

Science.gov (United States)

Tsuchiya, T; Kagawa, Y; Wakatsuki, N; Okamura, H

2001-07-01

Piezoelectric transformers are nothing but ultrasonic resonators with two pairs of electrodes provided on the surface of a piezoelectric substrate in which electrical energy is carried in the mechanical form. The input and output electrodes are arranged to provide the impedance transformation, which results in the voltage transformation. As they are operated at a resonance, the electrical equivalent circuit approach has traditionally been developed in a rather empirical way and has been used for analysis and design. The present paper deals with the analysis of the piezoelectric transformers based on the three-dimensional finite element modelling. The PIEZO3D code that we have developed is modified to include the external loading conditions. The finite element approach is now available for a wide variety of the electrical boundary conditions. The equivalent circuit of lumped parameters can also be derived from the finite element method (FEM) solution if required. The simulation of the present transformers is made for the low intensity operation and compared with the experimental results. Demonstration is made for basic Rosen-type transformers in which the longitudinal mode of a plate plays an important role; in which the equivalent circuit of lumped constants has been used. However, there are many modes of vibration associated with the plate, the effect of which cannot always be ignored. In the experiment, the double resonances are sometimes observed in the vicinity of the operating frequency. The simulation demonstrates that this is due to the coupling of the longitudinal mode with the flexural mode. Thus, the simulation provides an invaluable guideline to the transformer design.

Quantum decoration transformation for spin models

International Nuclear Information System (INIS)

Braz, F.F.; Rodrigues, F.C.; Souza, S.M. de; Rojas, Onofre

2016-01-01

It is quite relevant the extension of decoration transformation for quantum spin models since most of the real materials could be well described by Heisenberg type models. Here we propose an exact quantum decoration transformation and also showing interesting properties such as the persistence of symmetry and the symmetry breaking during this transformation. Although the proposed transformation, in principle, cannot be used to map exactly a quantum spin lattice model into another quantum spin lattice model, since the operators are non-commutative. However, it is possible the mapping in the “classical” limit, establishing an equivalence between both quantum spin lattice models. To study the validity of this approach for quantum spin lattice model, we use the Zassenhaus formula, and we verify how the correction could influence the decoration transformation. But this correction could be useless to improve the quantum decoration transformation because it involves the second-nearest-neighbor and further nearest neighbor couplings, which leads into a cumbersome task to establish the equivalence between both lattice models. This correction also gives us valuable information about its contribution, for most of the Heisenberg type models, this correction could be irrelevant at least up to the third order term of Zassenhaus formula. This transformation is applied to a finite size Heisenberg chain, comparing with the exact numerical results, our result is consistent for weak xy-anisotropy coupling. We also apply to bond-alternating Ising–Heisenberg chain model, obtaining an accurate result in the limit of the quasi-Ising chain.

Mammalian cell transformation: Mechanisms of carcinogenesis and assays for carcinogens

International Nuclear Information System (INIS)

Barrett, J.C.; Tennant, R.W.

1985-01-01

This book contains nine sections, each consisting of several papers. The section titles are: Molecular Changes in Cell Transformation; Differentiation, Growth Control, and Cell Transformation; Mutagenesis and Cell Transformation; Tumor Promotion and Cell Transformation; Mechanisms of Transformation of Human Fibroblasts; Mechanisms of Transformation of Epithelial Cells; Mechanisms of C 3 H 10T12 Cell Transformation; Mechanisms of Radiation-Induced Cell Transformation; and Use of Cell Transformation Assays for Carcinogen Testing