WorldWideScience

Sample records for hands-on minds-on activities

  1. Math in Action. Hands-On, Minds-On Math.

    Science.gov (United States)

    Waite-Stupiansky, Sandra; Stupiansky, Nicholas G.

    1998-01-01

    Hands-on math must also involve students' minds in creative thinking. Math manipulatives must be used for uncovering, not just discovering. This paper presents guidelines for planning hands-on, minds-on math for elementary students. Suggestions include dialoging, questioning, integrating manipulatives and other tools, writing, and evaluating. (SM)

  2. Robotic Mission to Mars: Hands-on, minds-on, web-based learning

    Science.gov (United States)

    Mathers, Naomi; Goktogen, Ali; Rankin, John; Anderson, Marion

    2012-11-01

    Problem-based learning has been demonstrated as an effective methodology for developing analytical skills and critical thinking. The use of scenario-based learning incorporates problem-based learning whilst encouraging students to collaborate with their colleagues and dynamically adapt to their environment. This increased interaction stimulates a deeper understanding and the generation of new knowledge. The Victorian Space Science Education Centre (VSSEC) uses scenario-based learning in its Mission to Mars, Mission to the Orbiting Space Laboratory and Primary Expedition to the M.A.R.S. Base programs. These programs utilize methodologies such as hands-on applications, immersive-learning, integrated technologies, critical thinking and mentoring to engage students in Science, Technology, Engineering and Mathematics (STEM) and highlight potential career paths in science and engineering. The immersive nature of the programs demands specialist environments such as a simulated Mars environment, Mission Control and Space Laboratory, thus restricting these programs to a physical location and limiting student access to the programs. To move beyond these limitations, VSSEC worked with its university partners to develop a web-based mission that delivered the benefits of scenario-based learning within a school environment. The Robotic Mission to Mars allows students to remotely control a real rover, developed by the Australian Centre for Field Robotics (ACFR), on the VSSEC Mars surface. After completing a pre-mission training program and site selection activity, students take on the roles of scientists and engineers in Mission Control to complete a mission and collect data for further analysis. Mission Control is established using software developed by the ACRI Games Technology Lab at La Trobe University using the principles of serious gaming. The software allows students to control the rover, monitor its systems and collect scientific data for analysis. This program encourages

  3. Promoting Female Students' Learning Motivation towards Science by Exercising Hands-On Activities

    Science.gov (United States)

    Wen-jin, Kuo; Chia-ju, Liu; Shi-an, Leou

    2012-01-01

    The purpose of this study is to design different hands-on science activities and investigate which activities could better promote female students' learning motivation towards science. This study conducted three types of science activities which contains nine hands-on activities, an experience scale and a learning motivation scale for data…

  4. Hands-On and Kinesthetic Activities for Teaching Phonological Awareness

    Science.gov (United States)

    Rule, Audrey C.; Dockstader, C. Jolene; Stewart, Roger A.

    2006-01-01

    Object box and environmental print card activities and kinesthetic/oral activities used in two before school programs for Title 1 students are presented for teaching phonological awareness concepts to students in primary grades. A small program evaluation study in which the two experimental groups made similar improvements and larger gains than a…

  5. Barrier Island Activity to Illustrate Hands-On Science

    Science.gov (United States)

    Griffin, Suzanne H.

    revealed that although boys and girls are equally interested in certain areas of the subject, there are areas in Physics where boys and girls interests are significantly different. No differences were found in intensity of boys' and girls' interests towards suggested Physics topics at primary P6/P7 level, S3 and S5/S6 levels. At S2 and S4 levels a significant decline of girls' interests relative to boys interests was observed. S2 and S4 stages are decision making ones when pupils have the opportunity to select courses for the future. It was also revealed that the ratio of boys to girls in Physics once established at S2 level remains unchanged through the years of Standard Grade and Higher Grade Physics courses. This may indicate that if the number of girls in Physics is an issue for concern then attention should be paid to the primary and, especially early secondary years to attract girls to Physics. School Physics courses in Scotland revealed a high retention rate of girls in Physics. Analyses of preferred activities revealed that practical work is the most enjoyable activity in Science/Physics lessons for both girls and boys at every stage of schooling and studying the theory was found to be the least enjoyable activity at school for both genders at every age. The picture was almost the reverse with university Physics students.

  6. Alignment of Hands-On STEM Engagement Activities with Positive STEM Dispositions in Secondary School Students

    Science.gov (United States)

    Christensen, Rhonda; Knezek, Gerald; Tyler-Wood, Tandra

    2015-01-01

    This study examines positive dispositions reported by middle school and high school students participating in programs that feature STEM-related activities. Middle school students participating in school-to-home hands-on energy monitoring activities are compared to middle school and high school students in a different project taking part in…

  7. Hands On Activity Pada Pembelajaran Geometri Sekolah Sebagai Asesmen Kinerja Siswa

    Directory of Open Access Journals (Sweden)

    Kartono Kartono

    2010-06-01

    Full Text Available Geometri merupakan cabang matematika yang diajarkan mulai dari pendidikan dasar sampai pendidikan tinggi, namun berdasarkan suatu penelitian hasil belajar geometri kurang memuaskan khususnya hasil belajar geometri sekolah. Hasil belajar geometri sekolah terkait langsung dengan kegiatan pembelajarannya. Pembelajaran geometri akan efektif apabila kegiatan yang dilakukan sesuai dengan struktur kemampuan berpikir siswa. Menurut Teori Van Hiele tentang pembelajaran geometri, bahwa tingkat kemampuan berpikir siswa dalam belajar geometri meliputi lima tingkat , yaitu visualisasi, analisis, deduksi informal, deduksi, dan rigor.Tingkatan berpikir tersebut akan dilalui siswa secara berurutan, kecepatan berpindah dari tingkat ke tingkat berikutnya banyak bergantung pada isi dan metode pembelajarannya.Perlu disediakan aktivitas-aktivitas dalam pembelajaran yang sesuai dengan tingkat berpikir siswa dalam bentuk hands on activity. Melalui hands on activity akan terbentuk suatu penghayatan dan pengalaman untuk  menetapkan suatu pengertian, karena mampu membelajarkan secara bersama-sama kemampuan kognitif, afektif, dan psikomotorik serta dapat memberikan penghayatan secara mendalam terhadap apa yang dipelajari, sehingga apa yang diperoleh oleh siswa tidak mudah dilupakan. Hands on activity selain sebagai komponen kegiatan pembelajaran, dapat dimanfaatkan sebagai intrumen asesmen, khususnya asesmen kinerja siswa. Gunakanlah hands on activity pada pembelajaran geometri sekolah dan manfaatkan kegiatan tersebut sebagai bentuk asesmen kinerja siswa. 

  8. Of Heart & Kidneys: Hands-On Activities for Demonstrating Organ Function & Repair

    Science.gov (United States)

    Kao, Robert M.

    2014-01-01

    A major challenge in teaching organ development and disease is deconstructing a complex choreography of molecular and cellular changes over time into a linear stepwise process for students. As an entry toward learning developmental concepts, I propose two inexpensive hands-on activities to help facilitate learning of (1) how to identify defects in…

  9. At-risk children's use of reflection and revision in hands-on experimental activities

    Science.gov (United States)

    Petrosino, Anthony J., Jr.

    The goal of this study was to investigate the effects of incorporating opportunities for reflection and revision in hands-on science instruction which emphasized experimentation using model rockets. The participants were low achieving sixth grade summer school students (n = 23) designated as at-risk for school failure by their district. The group was asked a series of interview questions based on work by Schauble et al. (1995) relating to experimentation. The interviews took place over three distinct time points corresponding to a "hands-on only" condition, a "hands-on with reflection and revision" condition and a "hands-on with repeated reflection and revision" condition. A Friedman's Two-Way Analysis of Variance by Ranks indicate students score low at first with traditional hands-on instruction but improve significantly with opportunities to reflect and revise their experiments. In addition, a sociocultural analysis was conducted during the summer school session to assess the model rocket activity as an apprenticeship, as guided participation and as participatory appropriation using a framework established by Rogoff (1994). Finally, a survey (the Classroom Environment Survey) was administered to the students measuring five constructs consistent with a constructivist classroom: participation, autonomy, relevance, commitment to learning and disruptions to learning. Analysis indicate students in the summer school model rocket intervention experienced a greater sense of constructivist principles during the activity than a similar comparison group utilizing reform minded instruction but not including opportunities for reflection and revision cycles. This research provides important evidence that, like scientists, students in school can learn effectively from extended practice in a varied context. Importantly, the data indicate that hands-on instruction is best utilized when opportunities for reflection and revision are made explicit. Implications are discussed related

  10. Blast a Biofilm: A Hands-On Activity for School Children and Members of the Public

    Directory of Open Access Journals (Sweden)

    Victoria L. Marlow

    2013-08-01

    Full Text Available Microbial biofilms are very common in nature and have both detrimental and beneficial effects on everyday life. Practical and hands-on activities have been shown to achieve greater learning and engagement with science by young people (1, 4, 5. We describe an interactive activity, developed to introduce microbes and biofilms to school age children and members of the public. Biofilms are common in nature and, as the favored mode of growth for microbes, biofilms affect many parts ofeveryday life. This hands-on activity highlights the key  concepts of biofilms by allowing participants to first build, then attempt to ‘blast,’ a biofilm, thus enabling the robust nature of biofilms to become apparent. We developed the blast-a-biofilm activity as part of our two-day Magnificent Microbes event, which took place at the Dundee Science Centre-Sensation in May 2010 (6. This public engagement event was run by scientists from the Division of Molecular Microbiology at the University of Dundee. The purpose of the event was to use fun and interesting activities to make both children and adults think about how fascinating microbes are. Additionally, we aimed to develop interactive resources that could be used in future events and learning environments, of which the blast-a-biofilm activity is one such resource. Scientists and policy makers in the UK believe engaging the public with research ensures that the work of universities and research institutes is relevant to society and wider social concerns and can also help scientists actively contribute to positive social change (2. The activity is aimed at junior school age children (9–11 years and adults with little or no knowledge of microbiology. The activity is suitable for use at science festivals, science clubs, and also in the classroom, where it can serve as a tool to enrich and enhance the school curriculum.

  11. KEEFEKTIFAN MODEL PBL DENGAN MIND MAP MELALUI HANDS ON ACTIVITY TERHADAP KEMAMPUAN BERPIKIR KREATIF SISWA

    Directory of Open Access Journals (Sweden)

    Istika Ramadhani

    2015-08-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui keefektifan pembelajaran model PBL dengan mind map melalui hands on activity terhadap kemampuan berpikir kreatif siswa. Populasi dalam penelitian ini adalah siswa kelas VII SMP Negeri 7 Semarang Tahun Ajaran 2014/2015. Pemilihan sampel dengan menggunakan cluster random sampling, diperoleh siswa kelas VII G sebagai kelas eksperimen1, kelas VII E sebagai kelas eksperimen 2, dan kelas VII C sebagai kelas kontrol. Kelas eksperimen 1 diberikan pembelajaran model PBL dengan mind map melalui hands on activity, kelas eksperimen 2 diberikan pembelajaran model PBL dengan mind map, dan kelas kontrol diberikan pembelajaran model ekspositori. Instrumen penelitian yang digunakan adalah tes kemampuan berpikir kreatif dan lembar pengamatan aktivitas siswa. Data dianalisis dengan uji proporsi, uji beda rata dengan anava, uji lanjut LSD, dan uji regresi. Hasil penelitian adalah (1 kemampuan berpikir kreatif siswa pada kelas eksperimen 1 dapat mencapai kriteria ketuntasan belajar; (2 kemampuan berpikir kreatif siswa pada kelas eksperimen 2 dapat mencapai kriteria ketuntasan belajar; (3 terdapat perbedaan kemampuan berpikir kreatif antara siswa pada kelas eksperimen 1, eksperimen 2, dan kelas kontrol. (4 terdapat pengaruh positif dari aktivitas belajar siswa pada kelas eksperimen 1 terhadap kemampuan berpikir kreatif siswa

  12. How can the curation of hands-on STEM activities power successful mobile apps and websites?

    Science.gov (United States)

    Porcello, D.; Peticolas, L. M.; Schwerin, T. G.

    2015-12-01

    The Lawrence Hall of Science (LHS) is University of California, Berkeley's public science center. Over the last decade, the Center for Technology Innovation at LHS has partnered with many institutions to establish a strong track record of developing successful technology solutions to support STEM teaching and learning within informal environments. Curation by subject-matter experts has been at the heart of many educational technology products from LHS and its partners that are directed at educators and families. This work includes: (1) popular digital libraries for inquiry-based activities at Howtosmile.org (NSF DRL #0735007) and NASA Earth and Space science education resources at NASAwavelength.org; and novel mobile apps like DIY Sun Science (NASA NNX10AE05G) and DIY Human Body (NIH 5R25OD010543) designed to scaffold exploration of STEM phenomena at home. Both NASA Wavelength and DIY Sun Science arose out of long-term collaborations with the Space Sciences Laboratory at UC Berkeley, Institute for Global Environmental Strategies (IGES), and other NASA-funded organizations, in partnership with NASA through cooperative agreements. This session will review the development, formative evaluation, and usage metrics for these two Earth and Space science-themed educational technology products directly relevant to the AGU community. Questions reviewed by presenters will include: What makes a good hands-on activity, and what essential information do educators depend on when searching for programming additions? What content and connections do families need to explore hands-on activities? How can technology help incorporate educational standards into the discovery process for learning experiences online? How do all these components drive the design and user experience of websites and apps that showcase STEM content?

  13. A hands-on activity for teaching product-process matrix: roadmap and application

    Directory of Open Access Journals (Sweden)

    Luciano Costa Santos

    2014-08-01

    Full Text Available The product-process matrix is a well-known framework proposed by Hayes and Wheelwright (1979 that is commonly used to identify processes types and to analyze the alignment of these processes with the products of a company. For didactic purposes, the matrix helps undergraduates beginners from Production Engineering to understand the logic of production systems, providing knowledge that will be essential for various course subjects. Considering the high level of abstraction of the concepts underlying the product-process matrix, this paper presents a way to facilitate the learning of them through the application of a hands-on activity which relies on the active learning philosophy. The proposed dynamic uses colored plastic sheets and PVC pipes as main materials, differing from the original proposal of Penlesky and Treleven (2005 . In addition to presenting an extremely simple exercise, which encourages its application in the classroom, another contribution of this paper is to define a complete roadmap for conducting the activity. This roadmap describes the assembly of fictitious products in customization and standardization scenarios for the comparison of two processes types of product-process matrix, job shop and assembly line. The activity revealed very successful after its application to two groups of Production Engineering undergraduates, confirmed with positive feedback from the students surveyed.

  14. Practical work in secondary science a minds-on approach

    CERN Document Server

    Abrahams, Ian

    2011-01-01

    Practical work is an essential feature of secondary science education. However, questions have been raised by some science educators about its effectiveness as a teaching and learning strategy. Whilst such an approach is generally effective in getting pupils to do things with objects and materials, it is seen as relatively ineffective in developing their conceptual understanding of the associated scientific ideas and concepts. Ian Abrahams argues that this is because it is practiced as a 'hands-on' rather than 'minds-on' activity. Abrahams draws together theory and practice on effective teaching and learning in practical work in science - covering biology, chemistry and physics. He provides clear guidance to ensure that students are encouraged and supported to be 'minds-on' as well as a 'hands-on' so that they can make the most of this learning experience. An invaluable text for inspiringaspiring andexperienced secondary science professionals, especially for those on M-level secondary science PGCE programmes.

  15. The Healthy Heart Race: A Short-Duration, Hands-on Activity in Cardiovascular Physiology for Museums and Science Festivals

    Science.gov (United States)

    Pressley, Thomas A.; Limson, Melvin; Byse, Miranda; Matyas, Marsha Lakes

    2011-01-01

    The "Healthy Heart Race" activity provides a hands-on demonstration of cardiovascular function suitable for lay audiences. It was field tested during the United States of America Science and Engineering Festival held in Washington, DC, in October 2010. The basic equipment for the activity consisted of lengths of plastic tubing, a hand…

  16. Student Responses to a Hands-On Kinesthetic Lecture Activity for Learning about the Oxygen Carrying Capacity of Blood

    Science.gov (United States)

    Breckler, Jennifer; Yu, Justin R.

    2011-01-01

    This article describes a new hands-on, or "kinesthetic," activity for use in a physiology lecture hall to help students comprehend an important concept in cardiopulmonary physiology known as oxygen carrying capacity. One impetus for designing this activity was to address the needs of students who have a preference for kinesthetic…

  17. The Use of Molecular Modeling as "Pseudoexperimental" Data for Teaching VSEPR as a Hands-On General Chemistry Activity

    Science.gov (United States)

    Martin, Christopher B.; Vandehoef, Crissie; Cook, Allison

    2015-01-01

    A hands-on activity appropriate for first-semester general chemistry students is presented that combines traditional VSEPR methods of predicting molecular geometries with introductory use of molecular modeling. Students analyze a series of previously calculated output files consisting of several molecules each in various geometries. Each structure…

  18. Using a Hands-On Hydrogen Peroxide Decomposition Activity to Teach Catalysis Concepts to K-12 Students

    Science.gov (United States)

    Cybulskis, Viktor J.; Ribeiro, Fabio H.; Gounder, Rajamani

    2016-01-01

    A versatile and transportable laboratory apparatus was developed for middle and high school (6th-12th grade) students as part of a hands-on outreach activity to estimate catalytic rates of hydrogen peroxide decomposition from oxygen evolution rates measured by using a volumetric displacement method. The apparatus was constructed with inherent…

  19. Hands On Earth Science.

    Science.gov (United States)

    Weisgarber, Sherry L.; Van Doren, Lisa; Hackathorn, Merrianne; Hannibal, Joseph T.; Hansgen, Richard

    This publication is a collection of 13 hands-on activities that focus on earth science-related activities and involve students in learning about growing crystals, tectonics, fossils, rock and minerals, modeling Ohio geology, geologic time, determining true north, and constructing scale-models of the Earth-moon system. Each activity contains…

  20. Access to hands-on mathematics measurement activities using robots controlled via speech generating devices: three case studies.

    Science.gov (United States)

    Adams, Kim; Cook, Al

    2014-07-01

    To examine how using a robot controlled via a speech generating device (SGD) influences the ways students with physical and communication limitations can demonstrate their knowledge in math measurement activities. Three children with severe physical disabilities and complex communication needs used the robot and SGD system to perform four math measurement lessons in comparing, sorting and ordering objects. The performance of the participants was measured and the process of using the system was described in terms of manipulation and communication events. Stakeholder opinions were solicited regarding robot use. Robot use revealed some gaps in the procedural knowledge of the participants. Access to both the robot and SGD was shown to provide several benefits. Stakeholders thought the intervention was important and feasible for a classroom environment. The participants were able to participate actively in the hands-on and communicative measurement activities and thus meet the demands of current math instruction methods. Current mathematics pedagogy encourages doing hands-on activities while communicating about concepts. Adapted Lego robots enabled children with severe physical disabilities to perform hands-on length measurement activities. Controlling the robots from speech generating devices (SGD) enabled the children, who also had complex communication needs, to reflect and report on results during the activities. By using the robots combined with SGDs, children both exhibited their knowledge of and experienced the concepts of mathematical measurements.

  1. Hands-On Calculus

    Science.gov (United States)

    Sutherland, Melissa

    2006-01-01

    In this paper we discuss manipulatives and hands-on investigations for Calculus involving volume, arc length, and surface area to motivate and develop formulae which can then be verified using techniques of integration. Pre-service teachers in calculus courses using these activities experience a classroom in which active learning is encouraged and…

  2. Hands-on Humidity.

    Science.gov (United States)

    Pankiewicz, Philip R.

    1992-01-01

    Presents five hands-on activities that allow students to detect, measure, reduce, and eliminate moisture. Students make a humidity detector and a hygrometer, examine the effects of moisture on different substances, calculate the percent of water in a given food, and examine the absorption potential of different desiccants. (MDH)

  3. Hands-On Hydrology

    Science.gov (United States)

    Mathews, Catherine E.; Monroe, Louise Nelson

    2004-01-01

    A professional school and university collaboration enables elementary students and their teachers to explore hydrology concepts and realize the beneficial functions of wetlands. Hands-on experiences involve young students in determining water quality at field sites after laying the groundwork with activities related to the hydrologic cycle,…

  4. Pre-Service Physics Teachers’ Perception toward Hands-on Lab Activity and 21st Century Skills

    Science.gov (United States)

    Putri, D. H.; Risdianto, E.; Sutarno, S.

    2017-09-01

    This study aimed to describe the hands-on lab activities and 21st century skills of pre-service physics teachers at a university in Bengkulu. The respondents of this study were 113 students who have been finished and were following the laboratory course. The research instrument was questionnaire. The explored aspects of laboratory activities were motivation, the importance of laboratory activities, equipment, laboratory activities process, suitability of curriculum, assessment, laboratory design, and the 21st century skills training. The 21st century skills explored consist of learning and innovation skills, life and careers skills, and media, information and technology skills. The data obtained will be analyzed descriptively. Based on the results of data analysis was obtained that they have a good perception toward the aspect of motivation, the importance of hands-on lab activities, and laboratory activities process; and the perception was fair for other aspects. The lowest perception score was obtained in the aspects of the 21st century skills training. This result was in accordance with the 21st century skills of pre-service physics teachers which were still in moderate category. So it is necessary to develop a model of laboratory activities design that can training and enhancing the 21st century skills for pre-service physics teachers.

  5. Lab Safety and Bioterrorism Readiness Curricula Using Active Learning and Hands-on Strategies as Continuing Education for Medical Technologists

    Directory of Open Access Journals (Sweden)

    Steven Fiester

    2010-04-01

    Full Text Available Frequent reports of laboratory- (and hospital- acquired infection suggest a deficiency in safety training or lack of compliance. To assess the need for continuing education (CE addressing this problem, an original education needs assessment survey was designed and administered to medical technologists (med-techs in Northeast Ohio. Survey results were used to design a learner-centered training curriculum (for example, Lab Safety and Bioterrorism Readiness trainings that engaged med-techs in active learning, integrative peer-to-peer teaching, and hands-on exercises in order to improve microbiology safety knowledge and associated laboratory techniques. The Lab Safety training was delivered six times and the Bioterrorism Readiness training was delivered five times. Pre/posttesting revealed significant gains in knowledge and techniques specific to laboratory safety, security, risk assessment, and bioterrorism readiness amongst the majority of med-techs completing the CE trainings. The majority of participants felt that the hands-on exercises met their needs and that their personal laboratory practices would change as a result of the training course, as measured by attitudinal surveys. We conclude that active learning techniques and peer education significantly enhance microbiology learning amongst participating med-techs.

  6. Hands-On Surgical Training Workshop: an Active Role-Playing Patient Education for Adolescents.

    Science.gov (United States)

    Wongkietkachorn, Apinut; Boonyawong, Pangpoom; Rhunsiri, Peera; Tantiphlachiva, Kasaya

    2017-09-01

    Most patient education involves passive learning. To improve patient education regarding surgery, an active learning workshop-based teaching method is proposed. The objective of this study was to assess level of patient surgical knowledge, achievement of workshop learning objectives, patient apprehension about future surgery, and participant workshop satisfaction after completing a surgical training workshop. A four-station workshop (surgical scrub, surgical suture, laparoscopic surgery, and robotic surgery) was developed to teach four important components of the surgical process. Healthy, surgery-naive adolescents were enrolled to attend this 1-h workshop-based training program. Training received by participants was technically and procedurally identical to training received by actual surgeons. Pre- and post-workshop questionnaires were used to assess learning outcomes. There were 1312 participants, with a mean age 15.9 ± 1.1 years and a gender breakdown of 303 males and 1009 females. For surgical knowledge, mean pre-workshop and post-workshop scores were 6.1 ± 1.5 and 7.5 ± 1.5 (out of 10 points), respectively (p education is an effective way to improve understanding of surgery-related processes. This teaching method may also decrease apprehension that patients or potential patients harbor regarding a future surgical procedure.

  7. Learning ion-solid interactions hands-on: An activity based, inquiry oriented, graduate course

    International Nuclear Information System (INIS)

    Braunstein, Gabriel

    2005-01-01

    Experimental work, using state of the art instrumentation, is integrated with lectures in a 'real life', learning by discovery approach, in the Ion-Solid Interactions graduate/undergraduate course offered by the Department of Physics of University of Central Florida. The lecture component of the course covers the underlying physical principles, and related scientific and technological applications, associated with the interaction of energetic ions with matter. In the experimental section the students form small groups and perform a variety of projects, experimental and computational, as part of a participative, inquiry oriented, learning process. In the most recent offering of the class, the students deposited a compound semiconductor thin film by dual-gun sputtering deposition, where each group aimed at a different stoichiometry of the same compound (Zn 1-x S x O y ). Then they analyzed the composition using Rutherford backscattering spectrometry, measured electrical transport properties using Hall effect and conductivity measurements, and determined the band gap using spectrophotometry. Finally the groups shared their results and each wrote a 'journal-like' technical article describing the entire work. In a different assignment, each group also developed a Monte Carlo computer program ('TRIM-like') to simulate the penetration of ions into a solid, in ion implantation, calculating the stopping cross-sections with approximate models, taught in class, which can be analytically solved. The combination of classroom/laboratory activities is very well received by the students. They gain real life experience operating state of the art equipment, and working in teams, while performing research-like projects, and simultaneously they learn the theoretical foundations of the discipline

  8. Could hands-on activities and smartphone in science CLIL teaching foster motivation and positive attitudes in students?

    Science.gov (United States)

    Ercolino, Immacolata; Maraffi, Sabina; Sacerdoti, Francesco M.

    2016-04-01

    Motivating students is one of the most challenging things we do as educators. We know that students need to be engaged to fully appreciate and learn what has been taught; the secret consists in nurturing student engagement. One of the newer ways to involve students and foster motivation in their Science learning consists in focusing on their usage and on applying knowledge and skills in their real-life. Students usually are engaged in authentic teaching pathway. Learning focusing on the experience helps teachers to improve classroom management by gathering students around a common organized activity. Hands-on activities support problem-based approaches to learning by focusing on the experience and process of investigating, proposing and creating solutions developing critical thinking skills and enlarge student's scientific glossary. We utilized in our classroom some lab activities that we learned at an ESA/GTTP Teacher training Workshop 2014 program at the Lorentz Center Leiden, Netherlands. "Cooking a comet - Ingredients for life" "Demonstration of the second Kepler's law using marbles" New media equipment, as student's own smartphones, can increase the teaching impact speaking the same language used by the students every day. They can measure magnetic fields, their GPS coordinates (longitude and latitude), and so on. In this way we can measure distances as parallax using mobile devices and simulating distance measurements in the classroom, on the school campus. The smartphone is the device with which the students answer questions, take decisions, and solve quests. Students infact can observe the Universe from their classroom and scientifically they can watch the Sun with "Google sky map" or "Star walk" are excellent tools to learn your way around the night sky .As teachers we used these apps in the classroom when Sun goes through the constellations so our students don't believe in horoscopes. This paper is focused on hands on activities and the effects of the

  9. What's Up in the Atmosphere? Exploring How Aerosols Impact Sky Color Through Hands-on Activities with Elementary GLOBE

    Science.gov (United States)

    Damadeo, K.; Taylor, J.

    2015-12-01

    What color is the sky today? The GLOBE Kids - Anita, Simon, and Dennis want to know why the sky isn't always the same shade of blue and sometimes isn't even blue. Through the new Elementary GLOBE Aerosols Storybook and Learning Activities, the GLOBE Kids learn that there's a lot more than air in the atmosphere, which can affect the colors we see in the sky. There are four hands-on activities in this unit: 1) Sky Observers - Students make observations of the sky, record their findings and share their observation reports with their peers. The activity promotes active observation and recording skills to help students observe sky color, and recognize that sky color changes; 2) Why (Not) So Blue? - Students make predictions about how drops of milk will affect color and visibility in cups of water representing the atmosphere to help them understand that aerosols in the atmosphere have an effect on sky conditions, including sky color and visibility. The activity also introduces the classification categories for daytime sky color and visibility; 3) See the Light - Students use prisms and glue sticks to explore the properties of light. The activity demonstrates that white light is made up of seven colors that represent different wavelengths, and illustrates why the sky is blue during the day and red at sunset; 4) Up in the Air - Students work in groups to make an aerosol sampler, a simple adhesive tool that allows students to collect data and estimate the extent of aerosols present at their school, understanding that, in fact, there are particles in the air we breathe. NGSS Alignment includes: Disciplinary Core Ideas- ESS2.D: Weather and Climate, ESS3.C: Human Impacts on Earth Systems, PS4.B: Electromagnetic Radiation, ESS3.A: Natural Resources; Science and Engineering Practices- Asking Questions and Defining Problems, Planning and Carrying Out an Investigation, Analyzing and Interpreting Data, Engaging in Argument from Evidence, Obtaining, Evaluating, and Communicating

  10. The mobile GeoBus outreach project: hands-on Earth and Mars activities for secondary schools in the UK

    Science.gov (United States)

    Robinson, Ruth; Pike, Charlotte; Roper, Kathryn

    2015-04-01

    GeoBus (www.geobus.org.uk) is an educational outreach project that was developed in 2012 by the Department of Earth and Environmental Sciences at the University of St Andrews, and it is sponsored jointly by industry and the UK Research Councils (NERC and EPSRC). The aims of GeoBus are to support the teaching of Earth Science in secondary schools by providing teaching resources that are not readily available to educators, to inspire young learners by incorporating new science research outcomes in teaching activities, and to provide a bridge between industry, higher education institutions, research councils and schools. Since its launch, GeoBus has visited over 160 different schools across the length and breadth of Scotland. Just under 35,000 pupils have been involved in practical hands-on Earth science learning activities since the project began in 2012, including many in remote and disadvantaged regions. The resources that GeoBus brings to schools include all the materials and equipment needed to run 50 - 80 minute workshops, and half- or whole-day Enterprise Challenges and field excursions. Workshops are aimed at a class of up to 30 pupils and topics include minerals, rocks, fossils, geological time, natural resources, climate change, volcanoes, earthquakes, and geological mapping. As with all GeoBus activities, the inclusion of equipment and technology otherwise unavailable to schools substantially increases the engagement of pupils in workshops. Field excursions are increasingly popular, as many teachers have little or no field trainng and feel unable to lead this type of activity. The excursions comprise half or full day sessions for up to 30 pupils and are tailored to cover the local geology or geomorphology. Enterprise Challenge are half or full day sessions for up to 100 pupils. Topics include "Journey to Mars", "Scotland's Rocks", "Drilling for Oil", and "Renewable Energy". Both of the energy Enterprise Challenges were designed to incorporates ideas and

  11. A Case Study for Comparing the Effectiveness of a Computer Simulation and a Hands-on Activity on Learning Electric Circuits

    Science.gov (United States)

    Ekmekci, Adem; Gulacar, Ozcan

    2015-01-01

    Science education reform emphasizes innovative and constructivist views of science teaching and learning that promotes active learning environments, dynamic instructions, and authentic science experiments. Technology-based and hands-on instructional designs are among innovative science teaching and learning methods. Research shows that these two…

  12. Using Polymer Semiconductors and a 3-in-1 Plastic Electronics STEM Education Kit to Engage Students in Hands-On Polymer Inquiry Activities

    Science.gov (United States)

    Enlow, Jessica L.; Marin, Dawn M.; Walter, Michael G.

    2017-01-01

    To improve polymer education for 9-12 and undergraduate students, a plastic electronics laboratory kit using polymer semiconductors has been developed. The three-module kit and curriculum use polymer semiconductors to provide hands-on inquiry activities with overlapping themes of electrical conductivity, light emission, and light-harvesting solar…

  13. A Year of Hands-on Science: Exciting Theme Units with More Than 100 Activities, Projects, and Experiments To Make Science Come Alive.

    Science.gov (United States)

    Kepler, Lynne; Novelli, Joan, Ed.

    This book contains 18 themed teaching units with 2 themes per chapter, organized seasonally around the traditional school year. Each theme includes natural connections and hands-on science activities that correspond to what children are already observing in their world. Each chapter begins with highlights of the month and a reproducible "Science…

  14. The analysis of student’s critical thinking ability on discovery learning by using hand on activity based on the curiosity

    Science.gov (United States)

    Sulistiani, E.; Waluya, S. B.; Masrukan

    2018-03-01

    This study aims to determine (1) the effectiveness of Discovery Learning model by using Hand on Activity toward critical thinking abilities, and (2) to describe students’ critical thinking abilities in Discovery Learning by Hand on Activity based on curiosity. This study is mixed method research with concurrent embedded design. Sample of this study are students of VII A and VII B of SMP Daarul Qur’an Ungaran. While the subject in this study is based on the curiosity of the students groups are classified Epistemic Curiosity (EC) and Perceptual Curiosity (PC). The results showed that the learning of Discovery Learning by using Hand on Activity is effective toward mathematics critical thinking abilities. Students of the EC type are able to complete six indicators of mathematics critical thinking abilities, although there are still two indicators that the result is less than the maximum. While students of PC type have not fully been able to complete the indicator of mathematics critical thinking abilities. They are only strong on indicators formulating questions, while on the other five indicators they are still weak. The critical thinking abilities of EC’s students is better than the critical thinking abilities of the PC’s students.

  15. Exploring the Solar System Activities Outline: Hands-On Planetary Science for Formal Education K-14 and Informal Settings

    Science.gov (United States)

    Allen, J. S.; Tobola, K. W.; Lindstrom, M. L.

    2003-01-01

    Activities by NASA scientists and teachers focus on integrating Planetary Science activities with existing Earth science, math, and language arts curriculum. The wealth of activities that highlight missions and research pertaining to the exploring the solar system allows educators to choose activities that fit a particular concept or theme within their curriculum. Most of the activities use simple, inexpensive techniques that help students understand the how and why of what scientists are learning about comets, asteroids, meteorites, moons and planets. With these NASA developed activities students experience recent mission information about our solar system such as Mars geology and the search for life using Mars meteorites and robotic data. The Johnson Space Center ARES Education team has compiled a variety of NASA solar system activities to produce an annotated thematic outline useful to classroom educators and informal educators as they teach space science. An important aspect of the outline annotation is that it highlights appropriate science content information and key science and math concepts so educators can easily identify activities that will enhance curriculum development. The outline contains URLs for the activities and NASA educator guides as well as links to NASA mission science and technology. In the informal setting educators can use solar system exploration activities to reinforce learning in association with thematic displays, planetarium programs, youth group gatherings, or community events. Within formal education at the primary level some of the activities are appropriately designed to excite interest and arouse curiosity. Middle school educators will find activities that enhance thematic science and encourage students to think about the scientific process of investigation. Some of the activities offered are appropriate for the upper levels of high school and early college in that they require students to use and analyze data.

  16. Hands-on Activities for Exploring the Solar System in K-14 Formal and Informal Education Settings

    Science.gov (United States)

    Allen, J. S.; Tobola, K. W.

    2004-12-01

    Introduction: Activities developed by NASA scientists and teachers focus on integrating Planetary Science activities with existing Earth science, math, and language arts curriculum. Educators may choose activities that fit a particular concept or theme within their curriculum from activities that highlight missions and research pertaining to exploring the solar system. Most of the activities use simple, inexpensive techniques that help students understand the how and why of what scientists are learning about comets, asteroids, meteorites, moons and planets. The web sites for the activities contain current information so students experience recent mission information such as data from Mars rovers or the status of Stardust sample return. The Johnson Space Center Astromaterials Research and Exploration Science education team has compiled a variety of NASA solar system activities to produce an annotated thematic syllabus useful to classroom educators and informal educators as they teach space science. An important aspect of the syllabus is that it highlights appropriate science content information and key science and math concepts so educators can easily identify activities that will enhance curriculum development. The outline contains URLs for the activities and NASA educator guides as well as links to NASA mission science and technology. In the informal setting, educators can use solar system exploration activities to reinforce learning in association with thematic displays, planetarium programs, youth group gatherings, or community events. In both the informal and the primary education levels the activities are appropriately designed to excite interest, arouse curiosity and easily take the participants from pre-awareness to the awareness stage. Middle school educators will find activities that enhance thematic science and encourage students to think about the scientific process of investigation. Some of the activities offered may easily be adapted for the upper

  17. Science Engagement Through Hands-On Activities that Promote Scientific Thinking and Generate Excitement and Awareness of NASA Assets, Missions, and Science

    Science.gov (United States)

    Graff, P. V.; Foxworth, S.; Miller, R.; Runco, S.; Luckey, M. K.; Maudlin, E.

    2018-01-01

    The public with hands-on activities that infuse content related to NASA assets, missions, and science and reflect authentic scientific practices promotes understanding and generates excitement about NASA science, research, and exploration. These types of activities expose our next generation of explorers to science they may be inspired to pursue as a future STEM career and expose people of all ages to unique, exciting, and authentic aspects of NASA exploration. The activities discussed here (Blue Marble Matches, Lunar Geologist Practice, Let's Discover New Frontiers, Target Asteroid, and Meteorite Bingo) have been developed by Astromaterials Research and Exploration Science (ARES) Science Engagement Specialists in conjunction with ARES Scientists at the NASA Johnson Space Center. Activities are designed to be usable across a variety of educational environments (formal and informal) and reflect authentic scientific content and practices.

  18. Skills training through hands-on practical activities in civil technology – a case study of three technical schools in South Africa

    Directory of Open Access Journals (Sweden)

    Mogale Maeko

    2014-12-01

    Full Text Available Skills training for Civil Technology learners in South African schools, is an aspect entrenched in the Civil Technology policy document in order to produce skilled personnel for a sustainable economy. Practical activities through the Practical Assessment Task (PAT are national requirements for all practical-based subjects from grades 10–12 in South African schools. The purpose of this study was to investigate the status of Civil Technology practical activities in three South African schools in the Eastern Cape Province. Purposive sampling was used to identify 41 learners and 3 teachers to participate in the study. Questionnaires, semi-structured interviews and observation as data collection methods were instruments used to collect data. The study has found that learners exit grade 12 without basic practical hands-on skills. Civil Technology practical activities were found to be inadequately offered in the three schools investigated. Educators should be well-trained by higher education institutions (HEIs to conduct practical activities with learners so that these learners are equipped with marketable skills in order to contribute to a sustainable economy after grade 12. Technology teacher education and training should include regular exposure and visits to relevant industries in order for teachers to keep abreast with the latest technological developments. The supply of equipment to schools should be coupled with routine maintenance of the equipment.

  19. Are all hands-on activities equally effective? Effect of using plastic models, organ dissections, and virtual dissections on student learning and perceptions.

    Science.gov (United States)

    Lombardi, Sara A; Hicks, Reimi E; Thompson, Katerina V; Marbach-Ad, Gili

    2014-03-01

    This study investigated the impact of three commonly used cardiovascular model-assisted activities on student learning and student attitudes and perspectives about science. College students enrolled in a Human Anatomy and Physiology course were randomly assigned to one of three experimental groups (organ dissections, virtual dissections, or plastic models). Each group received a 15-min lecture followed by a 45-min activity with one of the treatments. Immediately after the lesson and then 2 mo later, students were tested on anatomy and physiology knowledge and completed an attitude survey. Students who used plastic models achieved significantly higher overall scores on both the initial and followup exams than students who performed organ or virtual dissections. On the initial exam, students in the plastic model and organ dissection treatments scored higher on anatomy questions than students who performed virtual dissections. Students in the plastic model group scored higher than students who performed organ dissections on physiology questions. On the followup exam, when asked anatomy questions, students in the plastic model group scored higher than dissection students and virtual dissection students. On attitude surveys, organ dissections had higher perceived value and were requested for inclusion in curricula twice as often as any other activity. Students who performed organ dissections were more likely than the other treatment groups to agree with the statement that "science is fun," suggesting that organ dissections may promote positive attitudes toward science. The findings of this study provide evidence for the importance of multiple types of hands-on activities in anatomy laboratory courses.

  20. Hands On, Minds On: How Executive Function, Motor, and Spatial Skills Foster School Readiness

    Science.gov (United States)

    Cameron, Claire E.

    2018-01-01

    A growing body of research indicates that three foundational cognitive skills--executive function, motor skills, and spatial skills--form the basis for children to make a strong academic, behavioral, and social transition to formal school. Given inequitable early learning environments or "opportunity gaps" in the United States, these…

  1. Hands On, Hearts On, Minds On: Design Thinking within an Education Context

    Science.gov (United States)

    Cassim, Fatima

    2013-01-01

    Today the changing nature of design practice and the role of design within a widening domain indicate that the survival of design as a profession may depend less on traditional design education and more on responding strategically to contemporary changes, influenced by ethical and environmental issues as well as technological advancements. As a…

  2. The Impacts of Hydraulic Fracturing in the Eagle Ford Shale Region, South Texas: Hands-On Activities for Middle and High School Students

    Science.gov (United States)

    Kohlmeyer, C.; Loisel, J.; Schade, G. W.

    2016-12-01

    The Eagle Ford Shale (EFS) region of south-central Texas is strongly affected by a rapid increase in unconventional oil and gas production, and it ranks amongst the top production regions of the country. Across the EFS region and elsewhere, the fracking boom has been causing large emissions of methane (CH4) and non-methane hydrocarbons to the atmosphere, with direct consequences on atmospheric GHG concentration and air quality. An increase in seismic activity has also been reported in the area. Since these effects were initially underestimated, fracking operations remain largely unmitigated by regulation. As a result, large-scale oil and gas operations are found in close geographical proximity to rural communities who are uninformed and/or not accustomed to such operations and their effects on the environment and human health. Here we present a few hands-on activities that are being developed to educate middle and high school students on hydraulic fracturing and associated land-use change, water and air pollution, and seismicity induced by deep well injection. Modules on the carbon cycle (with an emphasis on CO2 and CH4), global environmental change, and human energy consumption around the world and main energy sources are also under development. Each activity is either based on scientific data gathered by students or information that is freely available; mapping exercises and time series analysis are included. For example, students will implement a geographic information system (GIS) to study local land-use change using satellite imagery analysis. These activities will be implemented in Fall 2016 and Spring 2017 in at least one Independent School District of the Eagle Ford Shale area. A broadly applicable educational booklet/teaching module on atmospheric CH4 emissions, with an emphasis on the environmental impacts of the oil and gas industry as the dominant source of emissions and land use change in shale areas, will be published.

  3. Hands-On Nuclear Physics

    Science.gov (United States)

    Whittaker, Jeff

    2013-01-01

    Nuclear science is an important topic in terms of its application to power generation, medical diagnostics and treatment, and national defense. Unfortunately, the subatomic domain is far removed from daily experience, and few learning aids are available to teachers. What follows describes a low-tech, hands-on method to teach important concepts in…

  4. Hands-on Activities Designed to Familiarize Users with Data from ABI on GOES-R and AHI on Himawari-8

    Science.gov (United States)

    Lindstrom, S. S.; Schmit, T.; Gerth, J.; Gunshor, M. M.; Mooney, M. E.; Whittaker, T. M.

    2016-12-01

    Recent and ongoing launches of next-generation geostationary satellites offer a challenge to familiarize National Weather Service (and other) forecasters with the new capabilities of different spectral channels sensed by the Advanced Baseline Imager (ABI) on GOES-R and the Advanced Himawari Imager (AHI) on Himawari-8. Hands on HTML5-based applets developed at the Cooperative Institute for Meteorological Satellite Studies allow for quick comparisons of reflectance in the visible (0.4 to 0.7 um) and near-infrared channels (0.86 to 2.2 um) and brightness temperatures in the infrared (3.9 to 13.3 um). The web apps to explore the different channels on ABI and AHI are at http://cimss.ssec.wisc.edu/goes/webapps/bandapp/; those that offer guidance on how to produce Red/Green/Blue composites are at http://cimss.ssec.wisc.edu/goes/webapps/satrgb/overview.html. This talk will briefly discuss highlights from both websites, and suggest ways the applications can be used to educate forecasters and the general public.

  5. Are All Hands-On Activities Equally Effective? Effect of Using Plastic Models, Organ Dissections, and Virtual Dissections on Student Learning and Perceptions

    Science.gov (United States)

    Lombardi, Sara A.; Hicks, Reimi E.; Thompson, Katerina V.; Marbach-Ad, Gili

    2014-01-01

    This study investigated the impact of three commonly used cardiovascular model-assisted activities on student learning and student attitudes and perspectives about science. College students enrolled in a Human Anatomy and Physiology course were randomly assigned to one of three experimental groups (organ dissections, virtual dissections, or…

  6. The Effect of Hands-on '"Energy-Saving House" Learning Activities on Elementary School Students' Knowledge, Attitudes, and Behavior Regarding Energy Saving and Carbon-Emissions Reduction

    Science.gov (United States)

    Lee, Lung-Sheng; Lin, Kuen-Yi; Guu, Yunn-Horng; Chang, Liang-Te; Lai, Chih-Chien

    2013-01-01

    Energy saving and carbon-emissions reduction (ESCER) are widely regarded as important issues for progress towards ensuring sustainable forms of economic development. This Taiwanese study focuses on the effects of a series of educational activities about ESCER on students' knowledge, attitudes and behavior. Sixty fifth-grade students from two…

  7. Use of Case-Based or Hands-On Laboratory Exercises with Physiology Lectures Improves Knowledge Retention, but Veterinary Medicine Students Prefer Case-Based Activities

    Science.gov (United States)

    McFee, Renee M.; Cupp, Andrea S.; Wood, Jennifer R.

    2018-01-01

    Didactic lectures are prevalent in physiology courses within veterinary medicine programs, but more active learning methods have also been utilized. Our goal was to identify the most appropriate learning method to augment the lecture component of our physiology course. We hypothesized that case-based learning would be well received by students and…

  8. Hands-on physics displays for undergraduates

    Science.gov (United States)

    Akerlof, Carl W.

    2014-07-01

    Initiated by Frank Oppenheimer in 1969, the Exploratorium in San Francisco has been the model for hands-on science museums throughout the world. The key idea has been to bring people with all levels of scientific background in contact with interesting and attractive exhibits that require the active participation of the visitor. Unfortunately, many science museums are now forced to cater primarily to very young audiences, often 8 years old or less, with predictable constraints on the intellectual depth of their exhibits. To counter this trend, the author has constructed several hands-on displays for the University of Michigan Physics Department that demonstrate: (1) magnetic levitation of pyrolytic graphite, (2) the varied magnetic induction effects in aluminum, copper and air, (3) chaotic motion of a double pendulum, (4) conservation of energy and momentum in a steel ball magnetic accelerator, (5) the diffraction pattern of red and green laser pointer beams created by CDs and DVDs, (6) a magnetic analog of the refraction of light at a dielectric boundary and (7) optical rotation of light in an aqueous fructose solution. Each of these exhibits can be constructed for something like $1000 or less and are robust enough to withstand unsupervised public use. The dynamic behavior of these exhibits will be shown in accompanying video sequences. The following story has a history that goes back quite a few years. In the late 70's, I was spending time at the Stanford Linear Accelerator Center accompanied by my family that included our two grade school children. Needless to say, we much enjoyed weekend excursions to all sorts of interesting sites in the Bay Area, especially the Exploratorium, an unusual science museum created by Frank Oppenheimer that opened in 1969. The notion that exhibits would be designed specifically for "hands-on" interactions was at that time quite revolutionary. This idea captivated a number of people everywhere including a friend in Ann Arbor, Cynthia

  9. A New Two-Step Approach for Hands-On Teaching of Gene Technology: Effects on Students' Activities During Experimentation in an Outreach Gene Technology Lab

    Science.gov (United States)

    Scharfenberg, Franz-Josef; Bogner, Franz X.

    2011-08-01

    Emphasis on improving higher level biology education continues. A new two-step approach to the experimental phases within an outreach gene technology lab, derived from cognitive load theory, is presented. We compared our approach using a quasi-experimental design with the conventional one-step mode. The difference consisted of additional focused discussions combined with students writing down their ideas (step one) prior to starting any experimental procedure (step two). We monitored students' activities during the experimental phases by continuously videotaping 20 work groups within each approach ( N = 131). Subsequent classification of students' activities yielded 10 categories (with well-fitting intra- and inter-observer scores with respect to reliability). Based on the students' individual time budgets, we evaluated students' roles during experimentation from their prevalent activities (by independently using two cluster analysis methods). Independently of the approach, two common clusters emerged, which we labeled as `all-rounders' and as `passive students', and two clusters specific to each approach: `observers' as well as `high-experimenters' were identified only within the one-step approach whereas under the two-step conditions `managers' and `scribes' were identified. Potential changes in group-leadership style during experimentation are discussed, and conclusions for optimizing science teaching are drawn.

  10. Using mockups for hands-on training

    International Nuclear Information System (INIS)

    Morris, A.R.

    1991-01-01

    The presentation of Using Mockups for Hands-on Training will be a slide presentation showing slides of mockups that are used by the Westinghouse Hanford Company in Maintenance Training activities. This presentation will compare mockups to actual plant equipment. It will explain the advantages and disadvantages of using mockups. The presentation will show students using the mockups in the classroom environment and slides of the actual plant equipment. The presentation will discuss performance-based training. This part of the presentation will show slides of students doing hands-on training on aerial lifts, fork trucks, and crane and rigging applications. Also shown are mockups that are used for basic hydraulics; hydraulic torquing; refrigeration and air conditioning; valve seat repair; safety relief valve training; and others. The presentation will discuss functional duplicate equipment and simulated nonfunctional equipment. The presentation will discuss the acquisition of mockups from spare parts inventory or from excess parts inventory. The presentation will show attendees how the mockups are used to enhance the training of the Hanford Site employees and how similar mockups could be used throughout the nuclear industry

  11. Discovering Periodicity: Hands-On, Minds-On Organization of the Periodic Table by Visualizing the Unseen

    Science.gov (United States)

    Selco, Jodye; Bruno, Mary; Chan, Sue

    2013-01-01

    Understanding how the periodic table of elements is organized and how to read information from it is fundamental for understanding chemistry. Introductory chemistry courses usually include discussions detailing what elemental information can be determined by virtue of its position on the periodic table. Although many people have been exposed to…

  12. Hand on the wheel, mind on the mobile: an analysis of social factors contributing to texting while driving.

    Science.gov (United States)

    Seiler, Steven J

    2015-02-01

    In an era defined by social technology, mobile phones provide constant connection to others. However, they also present a very dangerous situation when people choose to use their mobile phones while driving. In particular, exchanging text messages while driving has resulted in numerous accidents and fatalities. The purpose of this study is to examine social factors that lead people to text while driving. Specifically, using a multivariate logistic regression analysis of data from a 2010 survey by the Pew Research Center, variables for general mobile talk, driving while talking on a mobile, using the Internet on a mobile, sexting, and various motivations for texting were examined to determine factors that increase the likelihood of texting while driving. The findings suggest that people engage in mobile multiplexing (i.e., communication using two or more media on the mobile) while driving. Additionally, exchanging text messages in public, and consequently texting while driving, has become normalized. Furthermore, people are socialized into such behaviors through observing others texting while driving and using a mobile recklessly while driving. Finally, a number of motivations for texting were found to increase the likelihood of texting while driving significantly. Ultimately, the author contends that texting while driving has become a cultural artifact in the United States, which conflicts with driver safety as well as laws prohibiting texting while driving. The findings of this study could inform future awareness campaigns and technology developers to help establish a safer driving environment within the multitasking culture.

  13. Hands-On Skills for Caregivers

    Science.gov (United States)

    ... A + A You are here Home Hands-On Skills for Caregivers Printer-friendly version When you’re ... therapist who can help you develop your transferring skills. Allow for their reality Remember to accept your ...

  14. Hands-On Mathematics: Two Cases from Ancient Chinese Mathematics

    Science.gov (United States)

    Wang, Youjun

    2009-01-01

    In modern mathematical teaching, it has become increasingly emphasized that mathematical knowledge should be taught by problem-solving, hands-on activities, and interactive learning experiences. Comparing the ideas of modern mathematical education with the development of ancient Chinese mathematics, we find that the history of mathematics in…

  15. A Hands-On Approach to Maglev for Gifted Students.

    Science.gov (United States)

    Budd, Raymond T.

    2003-01-01

    This article discusses how Magnetic Levitation (Maglev) can be taught to gifted students in grades 4-9 using hands-on activities that align to the National Science Standards. Principles of magnetic levitation, advantages of magnetic levitation, construction of a Maglev project, testing and evaluation of vehicles, and presentation of the unit are…

  16. Parts of the Whole: Hands On Statistics

    Directory of Open Access Journals (Sweden)

    Dorothy Wallace

    2018-01-01

    Full Text Available In this column we describe a hands-on data collection lab for an introductory statistics course. The exercise elicits issues of normality, sampling, and sample mean comparisons. Based on volcanology models of tephra dispersion, this lab leads students to question the accuracy of some assumptions made in the model, particularly regarding the normality of the dispersal of tephra of identical size in a given atmospheric layer.

  17. A Hands-On Approach To Teaching Microcontroller

    Directory of Open Access Journals (Sweden)

    Che Fai Yeong

    2013-02-01

    Full Text Available Practice and application-oriented approach in education is important, and some research on active learning and cooperative problem-solving have shown that a student will learn faster and develop communication skill, leadership and team work through these methods. This paper presents a study of student preference and performance while learning the microcontroller subject with a 2-day curriculum that emphasized on hands-on approach. The curriculum uses the PIC16F877A microcontroller and participants learned to develop basic circuits and several other applications. Programming was completed on the MPLAB platform. Results show that participants had better understanding in this subject after attending the hands-on course.

  18. The Citizen Science Program "H2O SOS: Help Heal the Ocean—Student Operated Solutions: Operation Climate Change" teaches middle and high school students about ocean threats related to climate change through hands-on activities and learning experiences in the field. This is a continuation of the Program presented last year at the Poster Session.

    Science.gov (United States)

    Weiss, N. K.; Wood, J. H.

    2017-12-01

    TThe Citizen Science Program H2O SOS: Help Heal the Ocean—Student Operated Solutions: Operation Climate Change, teaches middle and high school students about ocean threats related to climate change through hands-on activities and learning experiences in the field. During each session (in-class or after-school as a club), students build an understanding about how climate change impacts our oceans using resources provided by ExplorOcean (hands-on activities, presentations, multi-media). Through a student leadership model, students present lessons to each other, interweaving a deep learning of science, 21st century technology, communication skills, and leadership. After participating in learning experiences and activities related to 6 key climate change concepts: 1) Introduction to climate change, 2) Increased sea temperatures, 3) Ocean acidification, 4) Sea level rise, 5) Feedback mechanisms, and 6) Innovative solutions. H2O SOS- Operation Climate change participants select one focus issue and use it to design a multi-pronged campaign to increase awareness about this issue in their local community. The campaign includes social media, an interactive activity, and a visual component. All participating clubs that meet participation and action goals earn a field trip to Ocean Quest where they dive deeper into their selected issue through hands-on activities, real-world investigations, and interviews or presentations with experts. In addition to self-selected opportunities to showcase their focus issue, teams will participate in one of several key events identified by Ocean Quest.

  19. Hands on versus remote techniques in waste management and decommissioning

    International Nuclear Information System (INIS)

    Asquith, J.D.

    1994-01-01

    The nuclear industry has many requirements for planned and uplanned physical interactions with radioactive materials or their environment. In each case a choice must be made as to whether the interaction should be made directly by the operator using a 'hands on' technique, wearing any necessary protective clothing, or by entirely remote techniques. In facilities where remote handling equipment has already been provided and planned for, remote techniques are usually the obvious choice. However in radioactive waste management and decommissioning there are many cases where unexpected requirements emerge, often for relatively short term activities, where the choice is more complex. This paper takes a look at the various factors which should be considered in order to make these decisions, an overview of the types of remote equipment available in the UK and some examples of the benefits which have resulted when remote techniques have been adopted in Britain

  20. Hands-on optics: an informal science education initiative

    Science.gov (United States)

    Johnson, Anthony M.; Pompea, Stephen M.; Arthurs, Eugene G.; Walker, Constance E.; Sparks, Robert T.

    2007-09-01

    The project is collaboration between two scientific societies, the Optical Society of America (OSA) and SPIE - The International Society for Optical Engineering and the National Optical Astronomy Observatory (NOAO). The program is designed to bring science education enrichment to thousands of underrepresented middle school students in more than ten states, including female and minority students, who typically have not been the beneficiaries of science and engineering resources and investments. HOO provides each teacher with up to six activity modules, each containing enough materials for up to 30 students to participate in 6-8 hours of hands-on optics-related activities. Sample activities, developed by education specialists at NOAO, include building kaleidoscopes and telescopes, communicating with a beam of light, and a hit-the-target laser beam challenge. Teachers engage in two days of training and, where possible, are partnered with a local optics professional (drawn from the local rosters of SPIE and OSA members) who volunteers to spend time with the teacher and students as they explore the module activities. Through these activities, students gain experience and understanding of optics principles, as well as learning the basics of inquiry, critical thinking, and problem solving skills involving optics, and how optics interfaces with other disciplines. While the modules were designed for use in informal after- school or weekend sessions, the number of venues has expanded to large and small science centers, Boys and Girls Clubs, Girl Scouts, summer camps, family workshops, and use in the classroom.

  1. A community sharing hands-on centers in engineer's training

    Directory of Open Access Journals (Sweden)

    jean-pierre jpt Taboy

    2006-02-01

    Full Text Available As teachers in Technical Universities, we must think about the engineer's training. We need good applicants, up to date hardware and software for hand-on. Each university don't have enough money and technical people to cover the new needs. A community sharing remote hand-on centers could be a solution.

  2. HANDS-ON MATERIALS AS INVITATION TO A FANTASY WORLD

    DEFF Research Database (Denmark)

    Ejersbo, Lisser Rye

    In this article I wish to introduce an innovative use of hands-on-materials, developed by Peter Müller, a Danish elementary school teacher. The hands-on material itself consists of a collection of small plastic bears in different colors and sizes, which can be used for many different purposes among...

  3. Calculator-Controlled Robots: Hands-On Mathematics and Science Discovery

    Science.gov (United States)

    Tuchscherer, Tyson

    2010-01-01

    The Calculator Controlled Robots activities are designed to engage students in hands-on inquiry-based missions. These activities address National science and technology standards, as well as specifically focusing on mathematics content and process standards. There are ten missions and three exploration extensions that provide activities for up to…

  4. PBL, Hands-On/ Digital resources in Geology, (Teaching/ Learning)

    Science.gov (United States)

    Soares, Rosa; Santos, Cátia; Carvalho, Sara

    2015-04-01

    The present study reports the elaboration, application and evaluation of a problem-based learning (PBL) program that aims to evaluate the effectiveness in students learning the Rock Cycle theme. Prior research on both PBL and Rock Cycle was conducted within the context of science education so as to elaborate and construct the intervention program. Findings from these studies indicated both the PBL methodology and Rock Cycle as helpful for teachers and students. PBL methodology has been adopted in this study since it is logically incorporated in a constructivism philosophy application and it was expected that this approach would assist students towards achieving a specific set of competencies. PBL is a student-centered method based on the principle of using problems as the starting point for the acquisition of new knowledge. Problems are based on complex real-world situations. All information needed to solve the problem is initially not given. Students will identify, find, and use appropriate resources to complete the exercise. They work permanently in small groups, developing self-directed activities and increasing participation in discussions. Teacher based guidance allows students to be fully engaged in knowledge building. That way, the learning process is active, integrated, cumulative, and connected. Theme "Rock Cycle" was introduced using a problematic situation, which outlined the geological processes highlighted in "Foz do Douro" the next coastline of the school where the study was developed. The questions proposed by the students were solved, using strategies that involved the use of hands-on activities and virtual labs in Geology. The systematization of the selected theme was performed in a field excursion, implemented according to the organizational model of Nir Orion, to The "Foz do Douro" metamorphic complex. In the evaluation of the learning process, data were obtained on students' development of knowledge and competencies through the application of

  5. 1st Hands-on Science Science Fair

    OpenAIRE

    Costa, Manuel F. M.; Esteves. Z.

    2017-01-01

    In school learning of science through investigative hands-on experiments is in the core of the Hands-on Science Network vision. However informal and non-formal contexts may also provide valuable paths for implementing this strategy aiming a better e!ective science education. In May 2011, a "rst country wide “Hands-on Science’ Science Fair” was organized in Portugal with the participation of 131 students that presented 38 projects in all "elds of Science. In this communication we will pr...

  6. The Impact of Hands-On-Approach on Student Academic Performance in Basic Science and Mathematics

    Science.gov (United States)

    Ekwueme, Cecilia O.; Ekon, Esther E.; Ezenwa-Nebife, Dorothy C.

    2015-01-01

    Children can learn mathematics and sciences effectively even before being exposed to formal school curriculum if basic Mathematics and Sciences concepts are communicated to them early using activity oriented (Hands-on) method of teaching. Mathematics and Science are practical and activity oriented and can best be learnt through inquiry (Okebukola…

  7. Hands-on experience with active appearance models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2002-01-01

    by an exhaustive filtering method. A series of AAMs for smaller groups of bones are used. It is found that AAM successful reconstructs 99% of metacarpals, proximal and medial phalanges and the distal 3 cm of radius and ulna. The rms accuracy is better than 240 microns (point-to-curve). The generative property...... as a biometrics to check the identity of patients in a longitudinal study. The conclusion is that AAM provides a highly efficient and unified framework for various tasks in diagnosis and assessment of bone related disorders....

  8. A Low Cost Implementation of an Existing Hands-on Laboratory Experiment in Electronic Engineering

    Directory of Open Access Journals (Sweden)

    Clement Onime

    2014-10-01

    Full Text Available In engineering the pedagogical content of most formative programmes includes a significant amount of practical laboratory hands-on activity designed to deliver knowledge acquisition from actual experience alongside traditional face-to-face classroom based lectures and tutorials; this hands-on aspect is not always adequately addressed by current e-learning platforms. An innovative approach to e-learning in engineering, named computer aided engineering education (CAEE is about the use of computer aids for the enhanced, interactive delivery of educational materials in different fields of engineering through two separate but related components; one for classroom and another for practical hands-on laboratory work. The component for hands-on laboratory practical work focuses on the use of mixed reality (video-based augmented reality tools on mobile devices/platforms. This paper presents the computer aided engineering education (CAEE implementation of a laboratory experiment in micro-electronics that highlights some features such as the ability to closely implement an existing laboratory based hands-on experiment with lower associated costs and the ability to conduct the experiment off-line while maintaining existing pedagogical contents and standards.

  9. A Low-Tech, Hands-On Approach To Teaching Sorting Algorithms to Working Students.

    Science.gov (United States)

    Dios, R.; Geller, J.

    1998-01-01

    Focuses on identifying the educational effects of "activity oriented" instructional techniques. Examines which instructional methods produce enhanced learning and comprehension. Discusses the problem of learning "sorting algorithms," a major topic in every Computer Science curriculum. Presents a low-tech, hands-on teaching method for sorting…

  10. A Hands-On Approach to Teaching Protein Translation & Translocation into the ER

    Science.gov (United States)

    LaBonte, Michelle L.

    2013-01-01

    The process of protein translation and translocation into the endoplasmic reticulum (ER) can often be challenging for introductory college biology students to visualize. To help them understand how proteins become oriented in the ER membrane, I developed a hands-on activity in which students use Play-Doh to simulate the process of protein…

  11. Exploring quantum physics through hands-on projects

    CERN Document Server

    Prutchi, David

    2012-01-01

    Build an intuitive understanding of the principles behind quantum mechanics through practical construction and replication of original experiments With easy-to-acquire, low-cost materials and basic knowledge of algebra and trigonometry, Exploring Quantum Physics through Hands-on Projects takes readers step by step through the process of re-creating scientific experiments that played an essential role in the creation and development of quantum mechanics. From simple measurements of Planck's constant to testing violations of Bell's inequalities using entangled photons, Exploring Quantum Physics through Hands-on Projects not only immerses readers in the process of quantum mechanics, it provides insight into the history of the field--how the theories and discoveries apply to our world not only today, but also tomorrow. By immersing readers in groundbreaking experiments that can be performed at home, school, or in the lab, this first-ever, hands-on book successfully demystifies the world of quantum physics for...

  12. Network attacks and defenses a hands-on approach

    CERN Document Server

    Trabelsi, Zouheir; Al Braiki, Arwa; Mathew, Sujith Samuel

    2012-01-01

    The attacks on computers and business networks are growing daily, and the need for security professionals who understand how malfeasants perform attacks and compromise networks is a growing requirement to counter the threat. Network security education generally lacks appropriate textbooks with detailed, hands-on exercises that include both offensive and defensive techniques. Using step-by-step processes to build and generate attacks using offensive techniques, Network Attacks and Defenses: A Hands-on Approach enables students to implement appropriate network security solutions within a laborat

  13. Teaching Hands-On Linux Host Computer Security

    Science.gov (United States)

    Shumba, Rose

    2006-01-01

    In the summer of 2003, a project to augment and improve the teaching of information assurance courses was started at IUP. Thus far, ten hands-on exercises have been developed. The exercises described in this article, and presented in the appendix, are based on actions required to secure a Linux host. Publicly available resources were used to…

  14. Hands on CERN: A Well-Used Physics Education Project

    Science.gov (United States)

    Johansson, K. E.

    2006-01-01

    The "Hands on CERN" education project makes it possible for students and teachers to get close to the forefront of scientific research. The project confronts the students with contemporary physics at its most fundamental level with the help of particle collisions from the DELPHI particle physics experiment at CERN. It now exists in 14 languages…

  15. Teaching DNA Fingerprinting using a Hands-on Simulation.

    Science.gov (United States)

    Schug, Thatcher

    1998-01-01

    Presents an inexpensive hands-on lesson in DNA fingerprinting that can be completed in a single class period. Involves students in solving a murder in which a drop of blood is fingerprinted and matched with the blood of the murderer. (DDR)

  16. Enhancing Lean Manufacturing Learning Experience through Hands-On Simulation

    Science.gov (United States)

    Elbadawi, Isam; McWilliams, Douglas L.; Tetteh, Edem G.

    2010-01-01

    Finding appropriate interactive exercises to increase students' learning in technical topic courses is always challenging to educators. In this study, several paper plane hands-on simulation exercises were developed, used, and tested in a lean manufacturing course for beginning college students. A pretest and posttest was used to assess the…

  17. Google Earth for Landowners: Insights from Hands-on Workshops

    Science.gov (United States)

    Huff, Tristan

    2014-01-01

    Google Earth is an accessible, user-friendly GIS that can help landowners in their management planning. I offered hands-on Google Earth workshops to landowners to teach skills, including mapmaking, length and area measurement, and database management. Workshop participants were surveyed at least 6 months following workshop completion, and learning…

  18. Teaching genetics using hands-on models, problem solving, and inquiry-based methods

    Science.gov (United States)

    Hoppe, Stephanie Ann

    Teaching genetics can be challenging because of the difficulty of the content and misconceptions students might hold. This thesis focused on using hands-on model activities, problem solving, and inquiry-based teaching/learning methods in order to increase student understanding in an introductory biology class in the area of genetics. Various activities using these three methods were implemented into the classes to address any misconceptions and increase student learning of the difficult concepts. The activities that were implemented were shown to be successful based on pre-post assessment score comparison. The students were assessed on the subjects of inheritance patterns, meiosis, and protein synthesis and demonstrated growth in all of the areas. It was found that hands-on models, problem solving, and inquiry-based activities were more successful in learning concepts in genetics and the students were more engaged than tradition styles of lecture.

  19. Hands-on lessons in ergonomics for youth

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, C; Alexandre, M; Jacobs, K

    2005-09-29

    Ergonomics risk factors apply to everybody. Numerous adults have experienced disabling injuries related to use of computers and other forms of technology. Now children are using technology even more than adults. Increasingly ergonomics risk factors are being recognized as present in the world of children. Outreach to schools and the surrounding community by employers may help protect the future work force. A growing body of researchers believe that children can benefit from the early introduction of ergonomics awareness and preventative measures. While individual representatives of the educational system may embrace the concept of introducing ergonomics into the classroom, a number of barriers can prevent implementation of integrated programs. Some of the barriers to introducing ergonomics in schools have been absence of a tie to educational standards, the existing demands on teaching hours, and the absence of easily executable lesson plans. Ergonomics is rarely included in teacher training and professional ergonomics expertise is needed for the development of a class-based program. As part of Strategic Vision plan for 2025, a National Laboratory identified community outreach and the future workforces as key areas for initiatives. A series of hands-on interactive modules have been developed by professional ergonomics specialists. They are being tested with elementary, middle and high school students. Where possible, the content has been tied to the educational standards in the State of California in the USA. Currently the modules include grip strength, effective breathing, optimal keyboard and mouse positions, optimizing chairs, posture and movement, backpack safety and safe lifting. Each module takes the students through a related activity or experience. An individual worksheet asks them questions about the experience and guides them to consider implications in their activities of daily living. A module on hearing is under development. The goal is to have a

  20. Molecular Biology for the Environment: an EC-US hands-on Course in Environmental Biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Victor de Lorenzo; Juan Luis Ramos; Jerome Kukor; Gerben J. Zylstra

    2004-02-15

    One of the central goals of this activity is to bring together young scientists (at the late Ph.D. or early postdoctoral stages of their careers) in a forum that should result in future collaborations. The course is designed to give scientists hands-on experience in modern, up-to-date biotechnological methods at the interface between molecular biology and environmental biotechnology for the analysis of microorganisms and their activities with regard to the remediation of pollutants in the environment.

  1. Communicate science: an example of food related hands-on laboratory approach

    Science.gov (United States)

    D'Addezio, Giuliana; Marsili, Antonella; Vallocchia, Massimiliano

    2014-05-01

    The Laboratorio Didattica e Divulgazione Scientifica of the Istituto Nazionale di Geofisica e Vulcanologia (INGV's Educational and Outreach Laboratory) organized activity with kids to convey scientific knowledge and to promote research on Earth Science, focusing on volcanic and seismic hazard. The combination of games and learning in educational activity can be a valuable tool for study of complex phenomena. Hands-on activity may help in engage kids in a learning process through direct participation that significantly improves the learning performance of children. Making learning fun motivate audience to pay attention on and stay focused on the subject. We present the experience of the hand-on laboratory "Laboratorio goloso per bambini curiosi di scienza (a delicious hands-on laboratory for kids curious about science)", performed in Frascati during the 2013 European Researchers' Night, promoted by the European Commission, as part of the program organized by the Laboratorio Didattica e Divulgazione Scientifica in the framework of Associazione Frascati Scienza (http://www.frascatiscienza.it/). The hand-on activity were designed for primary schools to create enjoyable and unusual tools for learning Earth Science. During this activity kids are involved with something related to everyday life, such as food, through manipulation, construction and implementation of simple experiments related to Earth dynamics. Children become familiar with scientific concepts such as composition of the Earth, plates tectonic, earthquakes and seismic waves propagation and experience the effect of earthquakes on buildings, exploring their important implications for seismic hazard. During the activity, composed of several steps, participants were able to learn about Earth inner structure, fragile lithosphere, waves propagations, impact of waves on building ecc.., dealing with eggs, cookies, honey, sugar, polenta, flour, chocolate, candies, liquorice sticks, bread, pudding and sweets. The

  2. IT release management a hands-on guide

    CERN Document Server

    Howard, Dave

    2011-01-01

    When implemented correctly, release management can help ensure that quality is integrated throughout the development, implementation, and delivery of services, applications, and infrastructure. This holistic, total cost of ownership approach allows for higher levels of system availability, is more cost effective to maintain, and increases overall stability, maintainability, and reliability. Filled with practical insights, IT Release Management: A Hands-on Guide clearly illustrates the effective implementation of a release process in the real world. It examines the similarities and differences

  3. THE STERN PROJECT–HANDS ON ROCKETS SCIENCE FOR UNIVERSITY STUDENT

    OpenAIRE

    Schüttauf, Katharina; Stamminger, Andreas; Lappöhn, Karsten

    2017-01-01

    In April 2012, the German Aerospace Center DLR initiated a sponsorship program for university students to develop, build and launch their own rockets over a period of three years. The program designation STERN was abbreviated from the German “STudentische Experimental-RaketeN”, which translates to Student- Experimental-Rockets. The primary goal of the STERN program is to inspire students in the subject of space transportation through hands-on activities within a pro...

  4. Hands on with ASP.NET MVC covering MVC 6

    CERN Document Server

    Sahay, Rahul

    2014-01-01

    MVC (Model-View-Controller) is the popular Microsoft technology which enables you to build dynamic, data-driven, mobile websites, TDD site. Hands-On with ASP.NET MVC is not only written for those who are going to have affair with MVC for the 1st time, rather it is written in such a way that even experienced professional will love reading this book. This book covers all the tiny steps on using MVC at its best. With complete practical tutorials to illustrate the concepts, you will step by step build one End to End application which covers below mentioned techniques - Controllers, Views, Models,

  5. Circuits and electronics hands-on learning with analog discovery

    CERN Document Server

    Okyere Attia, John

    2018-01-01

    The book provides instructions on building circuits on breadboards, connecting the Analog Discovery wires to the circuit under test, and making electrical measurements. Various measurement techniques are described and used in this book, including: impedance measurements, complex power measurements, frequency response measurements, power spectrum measurements, current versus voltage characteristic measurements of diodes, bipolar junction transistors, and Mosfets. The book includes end-of-chapter problems for additional exercises geared towards hands-on learning, experimentation, comparisons between measured results and those obtained from theoretical calculations.

  6. Teaching radio astrophysics the hand-on way

    Science.gov (United States)

    Joshi, Bhal Chandra

    Astronomy and space sciences have always been instrumental in attracting young students to physical sciences. While the lectures/demonstrations and exhibitions pertaining to space sci-ences capture the imagination of young students, these alone are not sufficient to induce them to join scientific research. In countries like India, where a large number of students take to physical sciences for under-graduate education, complex sociological factors are key issues in translating this large body of students to potential researchers. While lectures and exhibition lead to an increase in scientific awareness for these students, these do not give a feel for scien-tific research and bridge the gap between high school/college science education and high end research. In this context, a hands-on approach to astronomy education, in science research environments or closely connected to scientific institutions, offers a promising alternative. This approach has been used in optical astronomy, where inexpensive small telescopes are available, often coupling a vast network of amateur astronomy clubs to leading astronomy institutes. The non-visual and relatively more technical nature of radio astronomy has limited a similar approach in past for connecting students to space sciences using radio waveband. The tech-nological explosion in communication industry and radio connectivity in the last decade along with an expansion in engineering education makes this possible now using a hands-on approach in teaching radio astrophysics. In this presentation, the sociological factors affecting the student choice are discussed followed by a review of the efforts to bridge the above mentioned gap by various groups in the world in the last decade with a view to enumerate the best practices in a hands-on approach. A program using this approach at National Center for Radio Astrophysics is described, where the students are exposed to simple hands-on radio astronomy experiments such as spectral line

  7. Discovering SQL A Hands-On Guide for Beginners

    CERN Document Server

    Kriegel, Alex

    2011-01-01

    Teaching the SQL skills that businesses demand when hiring programmers If you're a SQL beginner, you don't just want to learn SQL basics, you also want to get some practical SQL skills you can use in the job market. This book gives you both. Covering the basics through intermediate topics with clear explanations, hands-on exercises, and helpful solutions, this book is the perfect introduction to SQL. Topics include both the current SQL:2008 standards, the upcoming SQL:2011 standards, and also how to use SQL against current releases of the most popular commercial SQL databases, such as Oracle,

  8. A hands-on course in sensors using the Arduino and Raspberry Pi

    CERN Document Server

    Ziemann, Volker

    2018-01-01

    A Hands-On Course in Sensors using the Arduino and Raspberry Pi is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers, Raspberry Pi and other control systems. The author describes the progression of raw signals through conditioning stages, digitization, data storage and presentation. The collection, processing, and understanding of sensor data plays a central role in industrial and scientific activities. This book builds simplified models of large industrial or scientific installations that contain hardware and other building blocks, including services for databases, web servers, control systems, and messaging brokers. A range of case studies are included within the book, including a weather station, geophones, a water-colour monitor, capacitance measurement, the profile of laser beam, and a remote-controlled and fire-seeking robot This book is suitable for advanced undergraduate and graduate students taking hands-on laboratory course...

  9. Developing an Innovative and Creative Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education

    Directory of Open Access Journals (Sweden)

    I. Badawi

    2016-12-01

    Full Text Available The goal of this study was to develop an innovative and creative hands-on project based on Lean Six Sigma experiments for engineering education at the College of Engineering at the University of Hail. The exercises were designed using junction box assembly to meet the following learning outcomes: 1-to provide students with solid experience on waste elimination and variation reduction and 2-to engage students in exercises related to assembly line mass production and motion study. To achieve these objectives, students were introduced to the principles of Lean manufacturing and Six Sigma through various pedagogical activities such as classroom instruction, laboratory experiments, hands-on exercises, and interactive group work. In addition, Minitab 17 statistical package and Quality Companion 3 software were used to facilitate The Lean Six Sigma exercises. The software application and hands-on manufacturing assembly were found to be extremely valuable in giving students the chance to identify which variables to control in order to minimize variation and eliminate waste. This research was funded by a grant from the Deanship of Academic Research at University of Hail for project number E-26-IC, and under the umbrella of Ministry of Education within the framework of the National Initiative on Creativity and Innovation in Saudi Universities at University of Hail.

  10. Geneva University: Experiments in Physics: Hands-on Creative Processes

    CERN Multimedia

    Université de Genève

    2011-01-01

    Geneva University Physics Department 24, quai Ernest-Ansermet CH-1211 Geneva 4 Tel: (022) 379 62 73 Fax: (022) 379 69 92   Lundi 3 octobre 2011, 17h00 Ecole de Physique, Auditoire Stueckelberg «Experiments in Physics : Hands-on Creative Processes» Prof. Manfred Euler Leibniz-Institute for Mathematics and Science Education (IPN) University of Kiel, Deutschland Experiments play a variety of different roles in knowledge generation. The lecture will focus on the function of experiments as engines of intuition that foster insights into complex processes. The experimental presentations consider self-organization phenomena in various domains that range from the nanomechanics of biomolecules to perception and cognition. The inherent universality contributes to elucidating the enigmatic phenomenon of creativity. Une verrée en compagnie du conférencier sera offerte après le colloque.       &...

  11. Designing a hands-on brain computer interface laboratory course.

    Science.gov (United States)

    Khalighinejad, Bahar; Long, Laura Kathleen; Mesgarani, Nima

    2016-08-01

    Devices and systems that interact with the brain have become a growing field of research and development in recent years. Engineering students are well positioned to contribute to both hardware development and signal analysis techniques in this field. However, this area has been left out of most engineering curricula. We developed an electroencephalography (EEG) based brain computer interface (BCI) laboratory course to educate students through hands-on experiments. The course is offered jointly by the Biomedical Engineering, Electrical Engineering, and Computer Science Departments of Columbia University in the City of New York and is open to senior undergraduate and graduate students. The course provides an effective introduction to the experimental design, neuroscience concepts, data analysis techniques, and technical skills required in the field of BCI.

  12. Hands-on courses in petroleum engineering improve performance

    Energy Technology Data Exchange (ETDEWEB)

    Abou-Kassem, J.H.; Islam, M.R. [Regina Univ., Regina, SK (Canada)

    1999-07-01

    A hands-on methodology was employed to teach eight lecture-based courses in the United Arab Emirates University in which initially two petroleum engineering courses were used to test the methodology. The courses are considered to be basic to petroleum engineering. Although the courses did not have any impact on the overall student grades, the courses stimulated independent thought among students who were not previously used to this mode of thinking. Students were exposed to laboratory experiments and project works that were considered previously to be too-difficult-to-handle by undergraduate students. The course methodology was more acceptable to the female than the male population. The course methodology centered on creative thinking, questioning the establishment methods and critiquing conventional modes of thinking. Despite the differences between male and female students, overall the student population recognized that their ability to think independently and critically improved after taking the course. An appendix contains examples of learning modules. 18 refs.

  13. Getting Their Hands Dirty: Qualitative Study on Hands-on Learning for Architectural Students in Design-build Course

    Directory of Open Access Journals (Sweden)

    Zunaibi B. Abdullah

    2011-06-01

    Full Text Available This qualitative study provides an in-depth perspective of hands-on learning through the observation and analysis of architectural students' views in a design-build program at the University of Nebraska-Lincoln during the fall semester of 2008. Qualitative data was gathered from 14 participants involved in the construction of a low energy double-storey house in the city of Lincoln, Nebraska. The study inventoried the requisite characteristics of a design-build course. Participants' views and activities were studied to ascribe the qualitative benefits of hands-on learning. In addition, students' motivation towards hands-on activities were evaluated in reference to student confidence and independence levels towards their future career as architects, designers or other design-build professionals. The findings showed the design-build course could offer a specific knowledge that link between theoretical subjects and the practical expect of building contractions.

  14. Hands-on Physics Education of Residents in Diagnostic Radiology.

    Science.gov (United States)

    Zhang, Jie; Hardy, Peter A; DiSantis, David J; Oates, M Elizabeth

    2017-06-01

    The American Board of Radiology Core Examination integrates assessment of physics knowledge into its overall testing of clinical radiology, with an emphasis on understanding image quality and artifacts, radiation dose, and patient safety for each modality or subspecialty organ system. Accordingly, achieving a holistic approach to physics education of radiology residents is a huge challenge. The traditional teaching of radiological physics-simply through didactic lectures-was not designed for such a holistic approach. Admittedly, time constraints and clinical demands can make incorporation of physics teaching into clinical practice problematic. We created and implemented a week-long, intensive physics rotation for fledgling radiology residents and evaluated its effectiveness. The dedicated physics rotation is held for 1 week during the first month of radiology residency. It comprises three components: introductory lectures, hands-on practical clinical physics operations, and observation of clinical image production. A brief introduction of the physics pertinent to each modality is given at the beginning of each session. Hands-on experimental demonstrations are emphasized, receiving the greatest allotment of time. The residents perform experiments such as measuring radiation dose, studying the relationship between patient dose and clinical practice (eg, fluoroscopy technique), investigating the influence of acquisition parameters (kV, mAs) on radiographs, and evaluating image quality using computed tomography, magnetic resonance imaging, ultrasound, and gamma camera/single-photon emission computed tomography/positron emission tomography phantoms. Quantitative assessment of the effectiveness of the rotation is based on an examination that tests the residents' grasp of basic medical physics concepts along with written course evaluations provided by each resident. The pre- and post-rotation tests show that after the physics rotation, the average correct score of 25

  15. Telescope Construction: A Hands-On Approach to Astronomy Education

    Science.gov (United States)

    Sarrazine, Angela R.; Albin, E.

    2009-01-01

    We report on a popular semester-long telescope making course offered at Fernbank Science Center in Atlanta, GA. The program is tailored for junior / senior level high school students and incorporates the current educational performance standards for the state of Georgia. This course steps out of the traditional classroom environment and allows students to explore optics and astronomical concepts by constructing their own telescopes. Student telescopes follow the classic six-inch f/8 Newtonian reflector design, which has proven to be a good compromise between portability and aperture. Participants meet for a few hours, twice weekly, to build their telescopes. Over the course of the semester, raw one-inch thick Pyrex mirror blanks are ground, polished, and figured by hand into precision telescope objectives. Along the way, students are introduced to the Ronchi and Foucault methods for testing optics and once figured, completed mirrors are then chemically silvered. A plywood Dobsonian-style base is built and eventually mated with an optical tube made from a standard eight-inch concrete form tube or sonotube. An evening of star testing the optics and observation is planned at the end of the semester to insure the proper operation of each telescope. In summary, we believe that a hands-on approach to the understanding and use of optical telescopes is a great way not only to instill enthusiasm among students for the night sky, but may perhaps inspire the next generation of professional telescope makers.

  16. An Educational Model for Hands-On Hydrology Education

    Science.gov (United States)

    AghaKouchak, A.; Nakhjiri, N.; Habib, E. H.

    2014-12-01

    This presentation provides an overview of a hands-on modeling tool developed for students in civil engineering and earth science disciplines to help them learn the fundamentals of hydrologic processes, model calibration, sensitivity analysis, uncertainty assessment, and practice conceptual thinking in solving engineering problems. The toolbox includes two simplified hydrologic models, namely HBV-EDU and HBV-Ensemble, designed as a complement to theoretical hydrology lectures. The models provide an interdisciplinary application-oriented learning environment that introduces the hydrologic phenomena through the use of a simplified conceptual hydrologic model. The toolbox can be used for in-class lab practices and homework assignments, and assessment of students' understanding of hydrological processes. Using this modeling toolbox, students can gain more insights into how hydrological processes (e.g., precipitation, snowmelt and snow accumulation, soil moisture, evapotranspiration and runoff generation) are interconnected. The educational toolbox includes a MATLAB Graphical User Interface (GUI) and an ensemble simulation scheme that can be used for teaching more advanced topics including uncertainty analysis, and ensemble simulation. Both models have been administered in a class for both in-class instruction and a final project, and students submitted their feedback about the toolbox. The results indicate that this educational software had a positive impact on students understanding and knowledge of hydrology.

  17. The impact of a hands-on approach to learning visible spectrometry upon students' performance, motivation, and attitudes.

    Science.gov (United States)

    Vrtacnik, Margareta; Gros, Natasa

    2013-01-01

    In this paper, the effect of introducing visible spectrometry concepts through hands-on laboratory work upon student learning within four vocational programs are discussed. All together, 118 students, average 18.6 years old, participated in the study. The results showed no correlation between students' motivational components (intrinsic, regulated, and controlled), chemistry self-concept and their achievement on an experiential knowledge test and knowledge gained from this hands-on approach. Statistically significant differences were found for academic achievement among students in a biotechnology technical program (School 1), food processing program (School 2), laboratory biomedicine program (School 3), and a biotechnology general program (School 4). Differences in academic achievement are further reflected in students' perception of particular knowledge gained through their hands-on experiences and in their expressed attitude toward different didactical characteristics. All students, regardless of their study program, highly evaluated the relaxed atmosphere that contributed to their self-confidence in completing their laboratory activities.

  18. Enhancing the Connection to Undergraduate Engineering Students: A Hands-On and Team-Based Approach to Fluid Mechanics

    Science.gov (United States)

    Wei, Tie; Ford, Julie

    2015-01-01

    This article provides information about the integration of innovative hands-on activities within a sophomore-level Fluid Mechanics course at New Mexico Tech. The course introduces students to the fundamentals of fluid mechanics with emphasis on teaching key equations and methods of analysis for solving real-world problems. Strategies and examples…

  19. A Study on Using Hands-On Science Inquiries to Promote the Geology Learning of Preservice Teachers

    Science.gov (United States)

    Lai, Ching-San

    2015-01-01

    This study aims to investigate the geology learning performance of preservice teachers. A total of 31 sophomores (including 11 preservice teachers) from an educational university in Taiwan participated in this study. The course arrangements include class teaching and hands-on science inquiry activities. The study searches both quantitative and…

  20. Introducing Chemical Reactions Concepts in K-6 through a Hands-On Food Spherification and Spaghetti-Fication Experiment

    Science.gov (United States)

    Gupta, Anju; Hill, Nicole; Valenzuela, Patricia; Johnson, Eric

    2017-01-01

    Recruiting students in STEM majors to fill the gap in STEM workforce is a continued challenge, which can be addressed by introducing scientific principles through hand-on activities to the students at an early stage. This paper presents the design, implementation and assessment of a chemistry-related workshop for sixth grade students that were…

  1. Hands-on-Entropy, Energy Balance with Biological Relevance

    Science.gov (United States)

    Reeves, Mark

    2015-03-01

    Entropy changes underlie the physics that dominates biological interactions. Indeed, introductory biology courses often begin with an exploration of the qualities of water that are important to living systems. However, one idea that is not explicitly addressed in most introductory physics or biology textbooks is important contribution of the entropy in driving fundamental biological processes towards equilibrium. From diffusion to cell-membrane formation, to electrostatic binding in protein folding, to the functioning of nerve cells, entropic effects often act to counterbalance deterministic forces such as electrostatic attraction and in so doing, allow for effective molecular signaling. A small group of biology, biophysics and computer science faculty have worked together for the past five years to develop curricular modules (based on SCALEUP pedagogy). This has enabled students to create models of stochastic and deterministic processes. Our students are first-year engineering and science students in the calculus-based physics course and they are not expected to know biology beyond the high-school level. In our class, they learn to reduce complex biological processes and structures in order model them mathematically to account for both deterministic and probabilistic processes. The students test these models in simulations and in laboratory experiments that are biologically relevant such as diffusion, ionic transport, and ligand-receptor binding. Moreover, the students confront random forces and traditional forces in problems, simulations, and in laboratory exploration throughout the year-long course as they move from traditional kinematics through thermodynamics to electrostatic interactions. This talk will present a number of these exercises, with particular focus on the hands-on experiments done by the students, and will give examples of the tangible material that our students work with throughout the two-semester sequence of their course on introductory

  2. Teachers' Perspectives on Online Virtual Labs vs. Hands-On Labs in High School Science

    Science.gov (United States)

    Bohr, Teresa M.

    This study of online science teachers' opinions addressed the use of virtual labs in online courses. A growing number of schools use virtual labs that must meet mandated laboratory standards to ensure they provide learning experiences comparable to hands-on labs, which are an integral part of science curricula. The purpose of this qualitative case study was to examine teachers' perceptions of the quality and effectiveness of high school virtual labs. The theoretical foundation was constructivism, as labs provide student-centered activities for problem solving, inquiry, and exploration of phenomena. The research questions focused on experienced teachers' perceptions of the quality of virtual vs. hands-on labs. Data were collected through survey questions derived from the lab objectives of The Next Generation Science Standards . Eighteen teachers rated the degree of importance of each objective and also rated how they felt virtual labs met these objectives; these ratings were reported using descriptive statistics. Responses to open-ended questions were few and served to illustrate the numerical results. Many teachers stated that virtual labs are valuable supplements but could not completely replace hands-on experiences. Studies on the quality and effectiveness of high school virtual labs are limited despite widespread use. Comprehensive studies will ensure that online students have equal access to quality labs. School districts need to define lab requirements, and colleges need to specify the lab experience they require. This study has potential to inspire positive social change by assisting science educators, including those in the local school district, in evaluating and selecting courseware designed to promote higher order thinking skills, real-world problem solving, and development of strong inquiry skills, thereby improving science instruction for all high school students.

  3. The effects of hands-on-science instruction on the science achievement of middle school students

    Science.gov (United States)

    Wiggins, Felita

    Student achievement in the Twenty First Century demands a new rigor in student science knowledge, since advances in science and technology require students to think and act like scientists. As a result, students must acquire proficient levels of knowledge and skills to support a knowledge base that is expanding exponentially with new scientific advances. This study examined the effects of hands-on-science instruction on the science achievement of middle school students. More specifically, this study was concerned with the influence of hands-on science instruction versus traditional science instruction on the science test scores of middle school students. The subjects in this study were one hundred and twenty sixth-grade students in six classes. Instruction involved lecture/discussion and hands-on activities carried out for a three week period. Specifically, the study ascertained the influence of the variables gender, ethnicity, and socioeconomic status on the science test scores of middle school students. Additionally, this study assessed the effect of the variables gender, ethnicity, and socioeconomic status on the attitudes of sixth grade students toward science. The two instruments used to collect data for this study were the Prentice Hall unit ecosystem test and the Scientific Work Experience Programs for Teachers Study (SWEPT) student's attitude survey. Moreover, the data for the study was treated using the One-Way Analysis of Covariance and the One-Way Analysis of Variance. The following findings were made based on the results: (1) A statistically significant difference existed in the science performance of middle school students exposed to hands-on science instruction. These students had significantly higher scores than the science performance of middle school students exposed to traditional instruction. (2) A statistically significant difference did not exist between the science scores of male and female middle school students. (3) A statistically

  4. Providing open-access online materials and hands-on sessions for GIS exercises

    Science.gov (United States)

    Oguchi, T.; Yamauchi, H.; Hayakawa, Y. S.

    2017-12-01

    Researchers of GIS (Geographical Information Systems/Sciences) in Japan have collaborated to provide materials for GIS lecture classes in universities for the last 20 years. The major outcomes include 1) a GIS core curriculum, 2) a GIS "body of knowledge" explaining the details of the curriculum, 3) a series of PowerPoint presentations, and 4) a comprehensive GIS textbook. However, materials for GIS exercises at university classes using GIS software have been limited in Japan. Therefore, we launched a project to provide such materials which will be available online and accessible by anybody. The materials cover broad basic aspects of GIS including geoscientific applications such as terrain analysis using digital elevation models. The materials utilize public-domain and open-source software packages such as QGIS and GRASS. The data used are also freely available ones such as those from the Geospatial Information Authority of Japan. The use of the GitHub platform to distribute the materials allow easier online interactions by both material producers and users. Selected sets of the materials have been utilized for hands-on activities including both official university classes and public instructions. We have been updating the materials based on the opinions of people who took the hands-on courses for better GIS education. The current materials are in Japanese, but we plan to translate some of them into English.

  5. Students' Hands-on Experimental Work vs Lecture Demonstration in Teaching Elementary School Chemistry.

    Science.gov (United States)

    Logar, Ana; Ferk-Savec, Vesna

    2011-12-01

    Science educators have suggested many benefits that accrue from engaging students in experimental activities, therefore, experimental work has a long and distinctive role in chemistry curriculum since. The presented empirical study focuses on the valuation of effectiveness of different forms of experimental work - students' hands-on experimental work vs teacher's lecture demonstration - from the viewpoint of the quality of content knowledge acquisition and knowledge retention in teaching primary school chemistry. 106 primary school students (age 14-15 years) participated in the study. The data was collected via pre- and post- test protocol and two delayed post tests. Additionally 16 students selected from the sample were interviewed. The results indicate that students' content knowledge gained through teacher's demonstration of experiment is better and better knowledge retention takes place in comparison to students' knowledge gained through students' hands-on experimental work. However, most of the inteviewed students stated that they prefered conducting of experiments by themselves in comparison to observation of teacher's demonstration.

  6. Conducting Original, Hands-On Astronomical Research in the Classroom

    Science.gov (United States)

    Corneau, M. J.

    2009-12-01

    teachers to convey moderately complex computer science, optical, geographic, mathematical, informational and physical principles through hands-on telescope operations. In addition to the general studies aspects of classroom internet-based astronomy, Tzec Maun supports real science by enabling operators precisely point telescopes and acquire extremely faint, magnitude 19+ CCD images. Thanks to the creative Team of Photometrica (photometrica.org), my teams now have the ability to process and analyze images online and produce results in short order. Normally, astronomical data analysis packages cost greater than thousands of dollars for single license operations. Free to my team members, Photometrica allows students to upload their data to a cloud computing server and read precise photometric and/or astrometric results. I’m indebted to Michael and Geir for their support. The efficacy of student-based research is well documented. The Council on Undergraduate Research defines student research as, "an inquiry or investigation conducted by an undergraduate that makes an original intellectual or creative contribution to the discipline." (http://serc.carleton.edu/introgeo/studentresearch/What. Teaching from Tzec Maun in the classroom is the most original teaching research I can imagine. I very much look forward to presenting this program to the convened body.

  7. Effects of Mindfulness on Diabetes Mellitus: Rationale and Overview.

    Science.gov (United States)

    Medina, Wilson L; Wilson, David; de Salvo, Vera; Vannucchi, Bruna; de Souza, Érika Leonardo; Lucena, Leandro; Sarto, Héctor Morillo; Modrego-Alarcón, Marta; Garcia-Campayo, Javier; Demarzo, Marcelo

    2017-01-01

    Diabetes mellitus (DM) is an emerging global healthcare problem and its prevalence is increasing at an alarming rate. Despite improvements in both medical and pharmacological therapies, a complex medical condition may demand a diversified approach, such as: drug therapy, healthy diet and exercises, diabetes education programs, adherence to medical treatment and active participation of the patients in their lifestyle changes, such as stress management. The concept of mindfulness is here defined as the awareness that unfolds from the intention to attentively observe the current experience in a non-judgmental and non-evaluative way. This state of awareness can be enhanced through the use of mindfulness-based interventions (MBIs), which have been associated to many physical and psychological health indicators. The aim of this overview is to offer the rationale and potential benefits of mindfulness in the control of DM and its complications. a narrative review of the current and updated literature available on online database and which came up using the terms "mindfulness" and "diabetes mellitus". Mindfulness-based Interventions (MBIs) can be seen as preventive and complementary interventions in DM, particularly for the relief of symptoms related to depression and anxiety in diabetic patients and also in the management of other factors, including mindful eating, physical exercises and treatment adherence. Although many studies only present research protocols, mindfulness seems to have beneficial effects on all aspects of diabetes, including incidence, control and complications. Furthermore, longer term and more carefully controlled trials are necessary in order to draw consistent conclusions on the beneficial role of MBIs on DM. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  8. Chaos in the Kitchen: A Hands-On Demonstration

    Science.gov (United States)

    Roe-Dale, Rachel

    2014-01-01

    This article outlines a class activity where students prepare croissants to get an intuitive feeling for the nature of a strange attractor. In particular during the preparation of the pastry dough, students investigate the effects of stretching and folding. These physical processes force trajectories (in this case the pastry dough) to remain…

  9. All hands on deck: CREWED for technology-enabled learning

    OpenAIRE

    Russell, Carol

    2009-01-01

    The University of New South Wales’ (UNSW’s) Faculty of Engineering is introducing a new process for designing and developing blended and fully online (distance) courses, as part of action research to support curriculum renewal. The process, referred to as CREWED (Curriculum Renewal and E-learning Workloads: Embedding in Disciplines), is being used to develop key courses that add flexibility to student progression pathways. By integrating the design of learning activities with the planning and...

  10. Windows 7 A quick, hands-on introduction

    CERN Document Server

    Lee, Wei-Meng

    2009-01-01

    This compact book offers the quickest path for Windows users to get started with Microsoft's Windows 7 operating system. You get the essential information you need to upgrade or install the system and configure it to fit your activities, along with a tour of Windows 7's features and built-in applications. Microsoft has learned from the mistakes of Windows Vista, and Windows 7 shows it-this new OS is much faster and more stable. With Windows 7: Up and Running, you'll learn what's new and what's changed from XP and Vista, and get advice on ways to use this system for work, entertainment, inst

  11. Student Content Knowledge Increases after Participation in a Hands-on Biotechnology Intervention

    Science.gov (United States)

    Bigler, Amber M.; Hanegan, Nikki L.

    2011-01-01

    Implementing biotechnology education through hands-on teaching methods should be considered by secondary biology teachers. This study is an experimental research design to examine increased student content knowledge in biotechnology after a hands-on biotechnology intervention. The teachers from both school groups participated in, Project Crawfish,…

  12. Faculty Workshops for Teaching Information Assurance through Hands-On Exercises and Case Studies

    Science.gov (United States)

    Yuan, Xiaohong; Williams, Kenneth; Yu, Huiming; Rorrer, Audrey; Chu, Bei-Tseng; Yang, Li; Winters, Kathy; Kizza, Joseph

    2017-01-01

    Though many Information Assurance (IA) educators agree that hands-on exercises and case studies improve student learning, hands-on exercises and case studies are not widely adopted due to the time needed to develop them and integrate them into curricula. Under the support of the National Science Foundation (NSF) Scholarship for Service program, we…

  13. Shape Memory Polymers: A Joint Chemical and Materials Engineering Hands-On Experience

    Science.gov (United States)

    Seif, Mujan; Beck, Matthew

    2018-01-01

    Hands-on experiences are excellent tools for increasing retention of first year engineering students. They also encourage interdisciplinary collaboration, a critical skill for modern engineers. In this paper, we describe and evaluate a joint Chemical and Materials Engineering hands-on lab that explores cross-linking and glass transition in…

  14. Science &Language Teaching in Hands-on Education

    Science.gov (United States)

    Gehlert, Sylvia

    2002-01-01

    As announced in the paper presented in Toulouse, a trinational teacher training program addressing school teachers from France, Germany and Italy on teaching foreign languages together with science and history through Space related projects has been implemented and launched successfully. Supported by the French Ministry of Education (Académie de Nice), the bigovernmental French-German Youth Office (Office franco- allemand pour la Jeunesse) and the European Space Agency the first session was held in Cannes in October 2001 and brought together 36 language, science and history teachers, 12 from each country. Through different workshops, presentations and visits this five-day training encounter initiated the participants with Space activities and exploration as well as offering them back-up information on astronomy. It gave them furthermore the opportunity of improving their linguistic skills and of exchanging their teaching experience. The program was highly welcomed by all the participants who will meet this year in Germany for the second session devoted to establishing together bi- or trinational projects for future class encounters based on the same subjects. My paper will deal with the results of the program which have been beyond expectation and will encourage us to continue this pluridisciplinary approach of language &science teaching and extend it to other language combinations.

  15. Hands-on Training Courses Using Research Reactors and Accelerators

    International Nuclear Information System (INIS)

    2014-01-01

    induced nuclear and atomic reactions. The extent and level of education and training offered by research reactor/particle accelerator facilities can be tailored to suit the interests of the implementing organization. This publication is intended to provide resource material to support practical educational and training curricula in nuclear science and technology in Member States and, in particular, those activities utilizing research reactors or particle accelerators. It was prepared using the outputs of expert and consultancy meetings held in Ghana (September 2007) and in Austria (December 2009), and from various IAEA lectures and practical training courses given at the International Centre for Theoretical Physics (ICTP), Italy, and the Atominstitut, Vienna University of Technology, Austria

  16. Hands-On Educational Programs and Projects at SICSA

    Science.gov (United States)

    Bell, L.

    2002-01-01

    The Sasakawa International Center for Space Architecture (SICSA) has a long history of projects that involve the design of space structures, including habitats for low-Earth orbit (LEO) and planetary applications. Some of these projects are supported by corporate sponsors, such as a space tourism research, planning and design study conducted for the owner of national U.S. hotel chain. Some have been undertaken in support of programs sponsored by the State Government of Texas, including current commercial spaceport development planning for the Texas Aerospace Commission and three counties that represent candidate spaceport sites. Other projects have been supported by NASA and the Texas Aerospace Consortium, including the design and development of SICSA's "Space Habitation Laboratory", a space station module sized environmental simulator facility which has been featured in the "NASA Select" television broadcast series. This presentation will highlight representative projects. SICSA is internationally recognized for its leadership in the field of space architecture. Many program graduates have embarked upon productive and rewarding careers with aerospace organizations throughout the world. NASA has awarded certificates of appreciation to SICSA for significant achievements contributing to its advanced design initiatives. SICSA and its work have been featured in numerous popular magazines, professional publications, and public media broadcasts in many countries. SICSA applies a very comprehensive scope of activities to the practice of space architecture. Important roles include mission planning conceptualization of orbital and planetary structures and assembly processes, and design of habitats to optimize human safety, adaptation and productivity. SICSA sponsors educational programs for upper division undergraduate students and graduate students with interests in space and experimental architecture. Many fourth year participants continue in the SICSA program throughout

  17. Improving chemical education from high school to college using a more hands-on approach

    Science.gov (United States)

    Ruddick, Kristie Winfield

    In this work, various alternative teaching methods and activities for chemical education are developed, presented, and evaluated. In the first study, an original hands-on activity using LEGO® blocks to model ionic chemical formulas is presented together with quantitative and qualitative data regarding its educational effectiveness. Students explore cation to anion ratios using LEGO® blocks to represent trivalent, divalent and monovalent cations and anions. High school chemistry students who participated in the LEGO® lab showed significantly higher post-test scores than other students. The second study grows out of the creation of a computational lab module that is shown to significantly increase student learning in the subject of molecular orbital theory in first semester college General Chemistry. The third and final study presented is a course redesign project for college CHEM 1100, Preparation for General Chemistry. In this project the classroom is “flipped”. Students watch video lectures at home, and spend class time working with peers and the instructor on problem solving activities. The results presented here are one of the first quantitative studies showing the effectiveness of “flipping the classroom”. Students who were taught using the Reverse-Instruction (RI) method had significantly higher success in both the Preparation for General Chemistry course and traditionally taught General Chemistry I the following semester.

  18. Hands-On Experiences in Deploying Cost-Effective Ambient-Assisted Living Systems.

    Science.gov (United States)

    Dasios, Athanasios; Gavalas, Damianos; Pantziou, Grammati; Konstantopoulos, Charalampos

    2015-06-18

    Older adults' preferences to remain independent in their own homes along with the high costs of nursing home care have motivated the development of Ambient Assisted Living (AAL) technologies which aim at improving the safety, health conditions and wellness of the elderly. This paper reports hands-on experiences in designing, implementing and operating UbiCare, an AAL based prototype system for elderly home care monitoring. The monitoring is based on the recording of environmental parameters like temperature and light intensity as well as micro-level incidents which allows one to infer daily activities like moving, sitting, sleeping, usage of electrical appliances and plumbing components. The prototype is built upon inexpensive, off-the-shelf hardware (e.g., various sensors, Arduino microcontrollers, ZigBee-compatible wireless communication modules) and license-free software, thereby ensuring low system deployment costs. The network comprises nodes placed in a house's main rooms or mounted on furniture, one wearable node, one actuator node and a centralized processing element (coordinator). Upon detecting significant deviations from the ordinary activity patterns of individuals and/or sudden falls, the system issues automated alarms which may be forwarded to authorized caregivers via a variety of communication channels. Furthermore, measured environmental parameters and activity incidents may be monitored through standard web interfaces.

  19. Hands-On Experiences in Deploying Cost-Effective Ambient-Assisted Living Systems

    Directory of Open Access Journals (Sweden)

    Athanasios Dasios

    2015-06-01

    Full Text Available Older adults’ preferences to remain independent in their own homes along with the high costs of nursing home care have motivated the development of Ambient Assisted Living (AAL technologies which aim at improving the safety, health conditions and wellness of the elderly. This paper reports hands-on experiences in designing, implementing and operating UbiCare, an AAL based prototype system for elderly home care monitoring. The monitoring is based on the recording of environmental parameters like temperature and light intensity as well as micro-level incidents which allows one to infer daily activities like moving, sitting, sleeping, usage of electrical appliances and plumbing components. The prototype is built upon inexpensive, off-the-shelf hardware (e.g., various sensors, Arduino microcontrollers, ZigBee-compatible wireless communication modules and license-free software, thereby ensuring low system deployment costs. The network comprises nodes placed in a house’s main rooms or mounted on furniture, one wearable node, one actuator node and a centralized processing element (coordinator. Upon detecting significant deviations from the ordinary activity patterns of individuals and/or sudden falls, the system issues automated alarms which may be forwarded to authorized caregivers via a variety of communication channels. Furthermore, measured environmental parameters and activity incidents may be monitored through standard web interfaces.

  20. STAR Library Education Network: a hands-on learning program for libraries and their communities

    Science.gov (United States)

    Dusenbery, P.

    2010-12-01

    Science and technology are widely recognized as major drivers of innovation and industry (e.g. Rising above the Gathering Storm, 2006). While the focus for education reform is on school improvement, there is considerable research that supports the role that out-of-school experiences can play in student achievement and public understanding of STEM disciplines. Libraries provide an untapped resource for engaging underserved youth and their families in fostering an appreciation and deeper understanding of science and technology topics. Designed spaces, like libraries, allow lifelong, life-wide, and life-deep learning to take place though the research basis for learning in libraries is not as developed as other informal settings like science centers. The Space Science Institute’s National Center for Interactive Learning (NCIL) in partnership with the American Library Association (ALA), the Lunar and Planetary Institute (LPI), and the National Girls Collaborative Project (NGCP) have received funding from NSF to develop a national education project called the STAR Library Education Network: a hands-on learning program for libraries and their communities (or STAR-Net for short). STAR stands for Science-Technology, Activities and Resources. The overarching goal of the project is to reach underserved youth and their families with informal STEM learning experiences. This project will deepen our knowledge of informal/lifelong learning that takes place in libraries and establish a learning model that can be compared to the more established free-choice learning model for science centers and museums. The project includes the development of two STEM hands-on exhibits on topics that are of interest to library staff and their patrons: Discover Earth and Discover Tech. In addition, the project will produce resources and inquiry-based activities that libraries can use to enrich the exhibit experience. Additional resources will be provided through partnerships with relevant

  1. The Hands-On Optics Project: a demonstration of module 3-magnificent magnifications

    Science.gov (United States)

    Pompea, Stephen M.; Sparks, Robert T.; Walker, Constance E.

    2014-07-01

    The Hands-On Optics project offers an example of a set of instructional modules that foster active prolonged engagement. Developed by SPIE, OSA, and NOAO through funding from the U.S. National Science Foundation, the modules were originally designed for afterschool settings and museums. However, because they were based on national standards in mathematics, science, and technology, they were easily adapted for use in classrooms. The philosophy and implementation strategies of the six modules will be described as well as lessons learned in training educators. The modules were implementing with the help of optics industry professionals who served as expert volunteers to assist educators. A key element of the modules was that they were developed around an understanding of optics misconceptions and used culminating activities in each module as a form of authentic assessment. Thus student achievement could be measured by evaluating the actual product created by each student in applying key concepts, tools, and applications together at the end of each module. The program used a progression of disciplinary core concepts to build an integrated sequence and crosscutting ideas and practices to infuse the principles of the modern electro-optical field into the modules. Whenever possible, students were encouraged to experiment and to create, and to pursue inquiry-based approaches. The result was a program that had high appeal to regular as well as gifted students.

  2. Mediating Role of Mindfulness on the Associations of Friendship Quality and Subjective Vitality.

    Science.gov (United States)

    Akin, Umran; Akin, Ahmet; Uğur, Erol

    2016-10-01

    This research investigated the mediator role of mindfulness on the relationship between friendship quality and subjective vitality. Participants were 273 university students (M age = 21 years, SD = 1.1) who completed a questionnaire package that included the Friendship Quality Scale, the Cognitive and Affective Mindfulness Scale, and the Subjective Vitality Scale. Both mindfulness and subjective vitality were correlated positively with friendship quality and subjective vitality was correlated positively with mindfulness. Mindfulness mediated the relationship between friendship quality and subjective vitality. Together, the findings illuminate the importance of friendship quality in psychological and cognitive adjustment. © The Author(s) 2016.

  3. Studies of Limits on Uncontrolled Heavy Ion Beam Losses for Allowing Hands-On Maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Reginald M. Ronningen; Igor Remec

    2010-09-11

    Dose rates from accelerator components activated by 1 W/m beam losses are obtained semiempirically for a 1 GeV proton beam and by use of Monte Carlo transport codes for the proton beam and for 777 MeV/u 3He, 500 MeV/u 48Ca, 86Kr, 136Xe, and 400 MeV/u 238U ions. The dose rate obtained by the semi-empirical method, 0.99 mSv/h (99 mrem/h) at 30 cm, 4 h after 100 d irradiation by a 1-GeV proton beam, is consistent with studies at several accelerator facilities and with adopted hands-on maintenance dose rate limits. Monte Carlo simulations verify this result for protons and extend studies to heavy ion beam losses in drift-tube linac and superconducting linac accelerating structures. The studies indicate that the 1 W/m limit imposed on uncontrolled beam losses for high-energy proton beams might be relaxed for heavy ion beams. These studies further suggest that using the ratio of neutrons produced by a heavy ion beam to neutrons produced by a proton beam along with the dose rate from the proton beam (for thin-target scenarios) should allow an estimate of the dose rates expected from heavy ion beam losses.

  4. TH-E-201-02: Hands-On Physics Teaching of Residents in Diagnostic Radiology

    International Nuclear Information System (INIS)

    Zhang, J.

    2016-01-01

    The ABR Core Examination stresses integrating physics into real-world clinical practice and, accordingly, has shifted its focus from passive recall of facts to active application of physics principles. Physics education of radiology residents poses a challenge. The traditional method of didactic lectures alone is insufficient, yet it is difficult to incorporate physics teaching consistently into clinical rotations due to time constraints. Faced with this challenge, diagnostic medical physicists who teach radiology residents, have been thinking about how to adapt their teaching to the new paradigm, what to teach and meet expectation of the radiology resident and the radiology residency program. The proposed lecture attempts to discuss above questions. Newly developed diagnostic radiology residents physics curriculum by the AAPM Imaging Physics Curricula Subcommittee will be reviewed. Initial experience on hands-on physics teaching will be discussed. Radiology resident who will have taken the BAR Core Examination will share the expectation of physics teaching from a resident perspective. The lecture will help develop robust educational approaches to prepare radiology residents for safer and more effective lifelong practice. Learning Objectives: Learn updated physics requirements for radiology residents Pursue effective approaches to teach physics to radiology residents Learn expectation of physics teaching from resident perspective J. Zhang, This topic is partially supported by RSNA Education Scholar Grant

  5. Interactive and Hands-on Methods for Professional Development of Undergraduate Researchers

    Science.gov (United States)

    Pressley, S. N.; LeBeau, J. E.

    2016-12-01

    Professional development workshops for undergraduate research programs can range from communicating science (i.e. oral, technical writing, poster presentations), applying for fellowships and scholarships, applying to graduate school, and learning about careers, among others. Novel methods of presenting the information on the above topics can result in positive outcomes beyond the obvious of transferring knowledge. Examples of innovative methods to present professional development information include 1) An interactive session on how to write an abstract where students are given an opportunity to draft an abstract from a short technical article, followed by discussion amongst a group of peers, and comparison with the "published" abstract. 2) Using the Process Oriented Guided Inquiry Learning (POGIL) method to evaluate and critique a research poster. 3) Inviting "experts" such as a Fulbright scholar graduate student to present on applying for fellowships and scholarships. These innovative methods of delivery provide more hands-on activities that engage the students, and in some cases (abstract writing) provide practice for the student. The methods also require that students develop team work skills, communicate amongst their peers, and develop networks with their cohort. All of these are essential non-technical skills needed for success in any career. Feedback from students on these sessions are positive and most importantly, the students walk out of the session with a smile on their face saying how much fun it was. Evaluating the impact of these sessions is more challenging and under investigation currently.

  6. TH-E-201-02: Hands-On Physics Teaching of Residents in Diagnostic Radiology

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, J. [University of Kentucky (United States)

    2016-06-15

    The ABR Core Examination stresses integrating physics into real-world clinical practice and, accordingly, has shifted its focus from passive recall of facts to active application of physics principles. Physics education of radiology residents poses a challenge. The traditional method of didactic lectures alone is insufficient, yet it is difficult to incorporate physics teaching consistently into clinical rotations due to time constraints. Faced with this challenge, diagnostic medical physicists who teach radiology residents, have been thinking about how to adapt their teaching to the new paradigm, what to teach and meet expectation of the radiology resident and the radiology residency program. The proposed lecture attempts to discuss above questions. Newly developed diagnostic radiology residents physics curriculum by the AAPM Imaging Physics Curricula Subcommittee will be reviewed. Initial experience on hands-on physics teaching will be discussed. Radiology resident who will have taken the BAR Core Examination will share the expectation of physics teaching from a resident perspective. The lecture will help develop robust educational approaches to prepare radiology residents for safer and more effective lifelong practice. Learning Objectives: Learn updated physics requirements for radiology residents Pursue effective approaches to teach physics to radiology residents Learn expectation of physics teaching from resident perspective J. Zhang, This topic is partially supported by RSNA Education Scholar Grant.

  7. Increasing awareness about antibiotic use and resistance: a hands-on project for high school students.

    Science.gov (United States)

    Fonseca, Maria João; Santos, Catarina L; Costa, Patrício; Lencastre, Leonor; Tavares, Fernando

    2012-01-01

    importance of judicious antibiotic use. The findings inform about the educational benefits of incorporating hands-on activities in science education programs.

  8. "Optics 4 every1", the hands-on optics outreach program of the Universidad Autonoma de Nuevo Leon

    Science.gov (United States)

    Viera-González, Perla M.; Sánchez-Guerrero, Guillermo E.

    2016-09-01

    The Fisica Pato2 (Physics 4 every1) outreach group started as a need of hands-on activities and active Science demonstrations in the education for kids, teenagers and basic education teachers in Nuevo Leffon maintaining a main objective of spread the word about the importance of Optics and Photonics; for accomplish this objective, since November 2013 several outreach events are organized every year by the group. The program Optics 4 every1 is supported by the Facultad de Ciencias Fisico Matematicas of the Universidad Autonoma de Nuevo Leon and the International Society for Optics and Photonics and consist in quick hands-on activities and Optics demonstrations designed for teach basic optical phenomena related with light and its application in everyday life. During 2015, with the purpose of celebrate the International Year of Light 2015, the outreach group was involved in 13 different events and reached more than 8,000 people. The present work explains the activities done and the outcome obtained with this program.

  9. Introducing computational thinking through hands-on projects using R with applications to calculus, probability and data analysis

    Science.gov (United States)

    Benakli, Nadia; Kostadinov, Boyan; Satyanarayana, Ashwin; Singh, Satyanand

    2017-04-01

    The goal of this paper is to promote computational thinking among mathematics, engineering, science and technology students, through hands-on computer experiments. These activities have the potential to empower students to learn, create and invent with technology, and they engage computational thinking through simulations, visualizations and data analysis. We present nine computer experiments and suggest a few more, with applications to calculus, probability and data analysis, which engage computational thinking through simulations, visualizations and data analysis. We are using the free (open-source) statistical programming language R. Our goal is to give a taste of what R offers rather than to present a comprehensive tutorial on the R language. In our experience, these kinds of interactive computer activities can be easily integrated into a smart classroom. Furthermore, these activities do tend to keep students motivated and actively engaged in the process of learning, problem solving and developing a better intuition for understanding complex mathematical concepts.

  10. Positive Affect Relevant to Epistemic Curiosity to Reflect Continuance Intention to Join a Hands-On Making Contest

    Science.gov (United States)

    Hong, Jon-Chao; Hwang, Ming-Yueh; Szeto, Elson; Tai, Kai-Hsin; Tsai, Chi-Ruei

    2016-01-01

    Hands-on making (e.g., "Maker") has become prevalent in current educational settings. To understand the role that students' epistemic curiosity plays in hands-on making contests, this study explored its correlation to students' positive affect and continuance intention to participate in a hands-on making contest called…

  11. Comparison of the effectiveness of hands-on versus online education in child passenger safety.

    Science.gov (United States)

    Mantha, Anita; Beckworth, Kristen L; Ansiaux, John A; Chen, Carol C; Hoffman, Benjamin; Shenoi, Rohit P

    2017-08-28

    Community paediatricians' knowledge of appropriate child safety seat (CSS) use in vehicles may be inadequate. We compared the effectiveness of hands-on and online education in improving and retaining child passenger safety (CPS) knowledge and skills among paediatric trainees. Paediatric trainees were randomised to receive hands-on skills training versus a 1-hour online module in CPS. CSS knowledge and installation skills were assessed using a validated 10-item/point questionnaire and an assessment tool respectively at baseline and after 6 months. Preintervention and postintervention knowledge improvement and CSS installation skills between groups were assessed using paired t-tests and effect size ( d ). Forty-eight students agreed to participate and were randomised. Thirty-nine completed training (hands-on: 23 and online: 15). At entry, no significant differences in learners' demographics and prior CPS education existed. Baseline CPS knowledge scores did not differ significantly between groups (p=0.26). Postintervention, both groups demonstrated a significant increase in knowledge scores (hands-on=3.1 (95% CI 2.4 to 3.7), ponline=2.6 (95% CI 1.9 to 3.3), ponline=1.1 (95% CI 0.7 to 1.6), ponline group (ponline group (forward-facing seat: 0.9 (95% CI -0.08 to 1.9), p=0.07); rear-facing seat: -0.2 (95% CI -1.1 to 0.7), p=0.6). Among paediatric trainees, hands-on and online CPS education are both effective in improving long-term CPS knowledge. Long-term installation skills for forward-facing and rear-facing CSS persist for hands-on education but are inconclusive for online education. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Open source EMR software: profiling, insights and hands-on analysis.

    Science.gov (United States)

    Kiah, M L M; Haiqi, Ahmed; Zaidan, B B; Zaidan, A A

    2014-11-01

    The use of open source software in health informatics is increasingly advocated by authors in the literature. Although there is no clear evidence of the superiority of the current open source applications in the healthcare field, the number of available open source applications online is growing and they are gaining greater prominence. This repertoire of open source options is of a great value for any future-planner interested in adopting an electronic medical/health record system, whether selecting an existent application or building a new one. The following questions arise. How do the available open source options compare to each other with respect to functionality, usability and security? Can an implementer of an open source application find sufficient support both as a user and as a developer, and to what extent? Does the available literature provide adequate answers to such questions? This review attempts to shed some light on these aspects. The objective of this study is to provide more comprehensive guidance from an implementer perspective toward the available alternatives of open source healthcare software, particularly in the field of electronic medical/health records. The design of this study is twofold. In the first part, we profile the published literature on a sample of existent and active open source software in the healthcare area. The purpose of this part is to provide a summary of the available guides and studies relative to the sampled systems, and to identify any gaps in the published literature with respect to our research questions. In the second part, we investigate those alternative systems relative to a set of metrics, by actually installing the software and reporting a hands-on experience of the installation process, usability, as well as other factors. The literature covers many aspects of open source software implementation and utilization in healthcare practice. Roughly, those aspects could be distilled into a basic taxonomy, making the

  13. Using videos, apps and hands-on experience in undergraduate hydrology teaching

    Science.gov (United States)

    Van Loon, Anne

    2016-04-01

    Hydrological sciences teaching always needs to make a link between the classroom and the outside world. This can be done with fieldwork and excursions, but the increasing availability of open educational resources gives more-and-more other options to make theory more understandable and applicable. In the undergraduate teaching of hydrology at the University of Birmingham we make use of a number of tools to enhance the hydrology 'experience' of students. Firstly, we add hydrological science videos available in the public domain to our explanations of theory. These are both visualisations of concepts and recorded demonstrations in the field or the lab. One example is the concept of catchments and travel times which has been excellently visualised by MetEd. Secondly, we use a number of mobile phone apps, which provide virtual reality information and real-time monitoring information. We use the MySoil App (by Natural Environment Research Council (NERC), British Geological Survey (BGS) and Centre for Ecology & Hydrology (CEH)) and iGeology / iGeology3D (by BGS) to let students explore soil properties and hydrogeology of an area of interest. And we use the River Levels App (by OGL based on Environment Agency real time data) for exploring real time river levels and investigating spatial variability. Finally, we developed small hands-on projects for students to apply the theory outside the classroom. We for instance let them do simple infiltration experiments and ask them to them design a measurement plan. Evaluations have shown that students enjoy these activities and that it helps their learning. In this presentation we hope to share our experience so that the options for using open (educational) resources for hydrology teaching become more used in linking the classroom to the outside world.

  14. Supporting the upper body with the hand on the thigh reduces back loading during lifting

    NARCIS (Netherlands)

    Kingma, I.; Faber, G.S.; van Dieen, J.H.

    2016-01-01

    When picking objects from the floor, low back pain patients often tend to support the upper body by leaning with one hand on a thigh. While this strategy may reduce back load, this has not yet been assessed, probably due to the difficulty of measuring the forces between hand and thigh.Ten healthy

  15. Document Questionnaires and Datasets with DDI: A Hands-On Introduction with Colectica

    OpenAIRE

    Iverson, Jeremy; Smith, Dan

    2018-01-01

    This workshop offers a hands-on, practical approach to creating and documenting both surveys and datasets with DDI and Colectica. Participants will build and field a DDI-driven survey using their own questions or samples provided in the workshop. They will then ingest, annotate, and publish DDI dataset descriptions using the collected survey data.

  16. Integrating Hands-On Undergraduate Research in an Applied Spatial Science Senior Level Capstone Course

    Science.gov (United States)

    Kulhavy, David L.; Unger, Daniel R.; Hung, I-Kuai; Douglass, David

    2015-01-01

    A senior within a spatial science Ecological Planning capstone course designed an undergraduate research project to increase his spatial science expertise and to assess the hands-on instruction methodology employed within the Bachelor of Science in Spatial Science program at Stephen F Austin State University. The height of 30 building features…

  17. Choices of Pre-Service Science Teachers Laboratory Environments: Hands-on or Hands-off?

    Science.gov (United States)

    Kapici, Hasan Ozgur; Akcay, Hakan

    2018-01-01

    Learning in laboratories for students is not only crucial for conceptual understanding, but also contributes to gaining scientific reasoning skills. Following fast developments in technology, online laboratory environments have been improved considerably and nowadays form an attractive alternative for hands-on laboratories. The study was done in…

  18. Hands-on Summer Camp to Attract K-12 Students to Engineering Fields

    Science.gov (United States)

    Yilmaz, Muhittin; Ren, Jianhong; Custer, Sheryl; Coleman, Joyce

    2010-01-01

    This paper explains the organization and execution of a summer engineering outreach camp designed to attract and motivate high school students as well as increase their awareness of various engineering fields. The camp curriculum included hands-on, competitive design-oriented engineering projects from several disciplines: the electrical,…

  19. Past Examination Questions in Senior Secondary Chemistry: From Written Practice to Hands-On Experiments

    Science.gov (United States)

    Chow, Cheuk-Fai; So, Wing-Mui Winnie; Cheung, Tsz-Yan

    2016-01-01

    This study applied an unconventional use of past examination papers by converting questions into hands-on experiments for students. Students in an experimental group were engaged in use of those experiments while the remainder attended conventional lectures with written practice. The results reflect that the experimental group positively improved…

  20. Three Simple Hands-On Soil Exercises Extension Professionals Can Incorporate into Natural Sciences Curriculum

    Science.gov (United States)

    Kleinschmidt, Andy

    2011-01-01

    The importance of healthy soil and of conveying the importance of soils starts by conveying a few basic concepts of soil science cannot be overstated. This article provides three hands-on exercises Extension professionals can add to natural resources or Master Gardener education curricula. These natural sciences exercises are easy to prepare for…

  1. Introduction to Density Functional Theory: Calculations by Hand on the Helium Atom

    Science.gov (United States)

    Baseden, Kyle A.; Tye, Jesse W.

    2014-01-01

    Density functional theory (DFT) is a type of electronic structure calculation that has rapidly gained popularity. In this article, we provide a step-by-step demonstration of a DFT calculation by hand on the helium atom using Slater's X-Alpha exchange functional on a single Gaussian-type orbital to represent the atomic wave function. This DFT…

  2. Developing Physics Concepts through Hands-On Problem Solving: A Perspective on a Technological Project Design

    Science.gov (United States)

    Hong, Jon-Chao; Chen, Mei-Yung; Wong, Ashley; Hsu, Tsui-Fang; Peng, Chih-Chi

    2012-01-01

    In a contest featuring hands-on projects, college students were required to design a simple crawling worm using planning, self-monitoring and self-evaluation processes to solve contradictive problems. To enhance the efficiency of problem solving, one needs to practice meta-cognition based on an application of related scientific concepts. The…

  3. Student tutors for hands-on training in focused emergency echocardiography – a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Kühl Matthias

    2012-10-01

    Full Text Available Abstract Background Focused emergency echocardiography performed by non-cardiologists has been shown to be feasible and effective in emergency situations. During resuscitation a short focused emergency echocardiography has been shown to narrow down potential differential diagnoses and to improve patient survival. Quite a large proportion of physicians are eligible to learn focused emergency echocardiography. Training in focused emergency echocardiography usually comprises a lecture, hands-on trainings in very small groups, and a practice phase. There is a shortage of experienced echocardiographers who can supervise the second step, the hands-on training. We thus investigated whether student tutors can perform the hands-on training for focused emergency echocardiography. Methods A total of 30 volunteer 4th and 5th year students were randomly assigned to a twelve-hour basic echocardiography course comprising a lecture followed by a hands-on training in small groups taught either by an expert cardiographer (EC or by a student tutor (ST. Using a pre-post-design, the students were evaluated by an OSCE. The students had to generate two still frames with the apical five-chamber view and the parasternal long axis in five minutes and to correctly mark twelve anatomical cardiac structures. Two blinded expert cardiographers rated the students’ performance using a standardized checklist. Students could achieve a maximum of 25 points. Results Both groups showed significant improvement after the training (p Conclusions Hands-on training by student tutors led to a significant gain in echocardiography skills, although inferior to teaching by an expert cardiographer.

  4. A Hands-on Activity for Teaching the Poisson Distribution Using the Stock Market

    Science.gov (United States)

    Dunlap, Mickey; Studstill, Sharyn

    2014-01-01

    The number of increases a particular stock makes over a fixed period follows a Poisson distribution. This article discusses using this easily-found data as an opportunity to let students become involved in the data collection and analysis process.

  5. Hands on or hands off? Disgust sensitivity and preference for environmental education activities

    Science.gov (United States)

    Robert D. Bixler; Myron F. Floyd

    1999-01-01

    Detailed descriptions of barriers to enviromuental education (EE) can provide opportunities for educators to foresee potential problems in programs. High disgust sensitivity is an intrapersonal barrier that constrains preference for learning opportunities involving manipulation of some organic materials. Middle school students in Texas (N = 450)...

  6. The Scanning Theremin Microscope: A Model Scanning Probe Instrument for Hands-On Activities

    Science.gov (United States)

    Quardokus, Rebecca C.; Wasio, Natalie A.; Kandel, S. Alex

    2014-01-01

    A model scanning probe microscope, designed using similar principles of operation to research instruments, is described. Proximity sensing is done using a capacitance probe, and a mechanical linkage is used to scan this probe across surfaces. The signal is transduced as an audio tone using a heterodyne detection circuit analogous to that used in…

  7. Art Activities about Mesopotamia, Egypt and Islam. Hands-On Ancient People.

    Science.gov (United States)

    Merrill, Yvonne Y.

    This book features objects of the Mesopotamian, the Egyptian, and Islamic cultures. In exploring important contributions in ancient art, the book presents visuals that are interpretations of authentic artifacts, usually in museum collections, or illustrations from archaeological publications and articles. Historical items (n=55+) have been adapted…

  8. Hands-On Nature. Information and Activities for Exploring the Environment with Children.

    Science.gov (United States)

    Lingelbach, Jenepher, Ed.

    Developed to provide direct opportunities for children to explore the natural world, this book offers creative new approaches to teaching environmentally. A workshop format is used in this book, which consists of four separate chapters entitled: Adaptations, Habitats, Cycles, and Designs of Nature. Each chapter contains a series of workshops which…

  9. Access Nature[TM]: 45 Fun, Hands-On Activities for Everyone!

    Science.gov (United States)

    Almeras, Bethe Gilbert; Heath, David

    "Access Nature" is an outdoor science curriculum that focuses on habitats. This curriculum targets students ages 6-14 and aims to develop environmental awareness, environmental leadership skills, and outdoor knowledge and skills. Specific adaptations for disabled students are also considered. Contents include: (1) "Introduction to…

  10. Hands on what? The relative effectiveness of physical versus virtual materials in an engineering design project by middle school children

    Science.gov (United States)

    Klahr, David; Triona, Lara M.; Williams, Cameron

    2007-01-01

    Hands-on activities play an important, but controversial, role in early science education. In this study we attempt to clarify some of the issues surrounding the controversy by calling attention to distinctions between: (a) type of instruction (direct or discovery); (b) type of knowledge to be acquired (domain-general or domain-specific); and (c) type of materials that are used (physical or virtual). We then describe an empirical study that investigates the relative effectiveness of the physical-virtual dimension. In the present study, seventh and eighth grade students assembled and tested mousetrap cars with the goal of designing a car that would go the farthest. Children were assigned to four different conditions, depending on whether they manipulated physical or virtual materials, and whether they had a fixed number of cars they could construct or a fixed amount of time in which to construct them. All four conditions were equally effective in producing significant gains in learners' knowledge about causal factors, in their ability to design optimal cars, and in their confidence in their knowledge. Girls' performance, knowledge, and effort were equal to boys' in all conditions, but girls' confidence remained below boys' throughout. Given the fact that, on several different measures, children were able to learn as well with virtual as with physical materials, the inherent pragmatic advantages of virtual materials in science may make them the preferred instructional medium in many hands-on contexts.

  11. A low-cost, hands-on module to characterize antimicrobial compounds using an interdisciplinary, biophysical approach.

    Directory of Open Access Journals (Sweden)

    Karishma S Kaushik

    2015-01-01

    Full Text Available We have developed a hands-on experimental module that combines biology experiments with a physics-based analytical model in order to characterize antimicrobial compounds. To understand antibiotic resistance, participants perform a disc diffusion assay to test the antimicrobial activity of different compounds and then apply a diffusion-based analytical model to gain insights into the behavior of the active antimicrobial component. In our experience, this module was robust, reproducible, and cost-effective, suggesting that it could be implemented in diverse settings such as undergraduate research, STEM (science, technology, engineering, and math camps, school programs, and laboratory training workshops. By providing valuable interdisciplinary research experience in science outreach and education initiatives, this module addresses the paucity of structured training or education programs that integrate diverse scientific fields. Its low-cost requirements make it especially suitable for use in resource-limited settings.

  12. Comparing hands-on and video training for postpartum hemorrhage management

    DEFF Research Database (Denmark)

    Nilsson, Cecilia; Sørensen, Bjarke Lund; Sørensen, Jette Led

    2014-01-01

    , pass rates improved significantly. No significant differences in performance score or pass rates were found between the two methods. The findings indicate that postpartum hemorrhage management training by mobile media might be just as effective as conventional hands-on training and a feasible way...... to overcome the outreach gap in sub-Saharan Africa's rural areas, where peripheral health facilities are generally difficult to reach with conventional training programs....

  13. MO-AB-210-02: Ultrasound Imaging and Therapy-Hands On Workshop

    International Nuclear Information System (INIS)

    Sammet, S.

    2015-01-01

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  14. Hands-on-Universe, Europe Bringing frontline interactive astronomy to the classroom

    Science.gov (United States)

    Ferlet, R.

    Hands-on-Universe, Europe (EU-HOU) aims at re-awakening the interest for science in the young generations through astronomy and new technologies. It relies on real observations acquired through a worldwide internet-based network of automatic telescopes or with didactical tools (webcam, radiotelescope). Pupils manipulate images in the classroom environment, using specific software within pedagogical resources constructed in close collaboration between researchers and teachers. EU-HOU is freely available on the web, and trains european teachers.

  15. MO-AB-210-01: Ultrasound Imaging and Therapy-Hands On Workshop

    International Nuclear Information System (INIS)

    Lu, Z.

    2015-01-01

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  16. MO-AB-210-02: Ultrasound Imaging and Therapy-Hands On Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Sammet, S. [University of Chicago Medical Center (United States)

    2015-06-15

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  17. MO-AB-210-01: Ultrasound Imaging and Therapy-Hands On Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Z. [University of Chicago (United States)

    2015-06-15

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  18. Establishing CAD/CAM in Preclinical Dental Education: Evaluation of a Hands-On Module.

    Science.gov (United States)

    Schwindling, Franz Sebastian; Deisenhofer, Ulrich Karl; Porsche, Monika; Rammelsberg, Peter; Kappel, Stefanie; Stober, Thomas

    2015-10-01

    The aim of this study was to evaluate a hands-on computer-assisted design/computer-assisted manufacture (CAD/CAM) module in a preclinical dental course in restorative dentistry. A controlled trial was conducted by dividing a class of 56 third-year dental students in Germany into study and control groups; allocation to the two groups depended on student schedules. Prior information about CAD/CAM-based restorations was provided for all students by means of lectures, preparation exercises, and production of gypsum casts of prepared resin teeth. The study group (32 students) then participated in a hands-on CAD/CAM module in small groups, digitizing their casts and designing zirconia frameworks for single crowns. The digitization process was introduced to the control group (24 students) solely by means of a video-supported lecture. To assess the knowledge gained, a 20-question written examination was administered; 48 students took the exam. The results were analyzed with Student's t-tests at a significance level of 0.05. The results on the examination showed a significant difference between the two groups: the mean scores were 16.8 (SD 1.7, range 13-19) for the study group and 12.5 (SD 3, range 4-18) for the control group. After the control group had also experienced the hands-on module, a total of 48 students from both groups completed a questionnaire with 13 rating-scale and three open-ended questions evaluating the module. Those results showed that the module was highly regarded by the students. This study supports the idea that small-group hands-on courses are helpful for instruction in digital restoration design. These students' knowledge gained and satisfaction seemed to justify the time, effort, and equipment needed.

  19. Oracle SOA BPEL PM 11g R1 a hands-on tutorial

    CERN Document Server

    Saraswathi, Ravi

    2013-01-01

    This hands-on, example-driven guide is a practical getting started tutorial with plenty of step-by-step instructions for beginner to intermediate level readers working with BPEL PM in Oracle SOA SuiteWritten for SOA developers, administrators, architects, and engineers who want to get started with Oracle BPEL PM 11g. No previous experience with BPEL PM is required, but an understanding of SOA and web services is assumed

  20. Does Personal Distress Mediate the Effect of Mindfulness on Professional Quality of Life?

    Directory of Open Access Journals (Sweden)

    Jacky T. Thomas

    2012-11-01

    Full Text Available Personal distress is an aspect of the empathy construct which has been negatively associated with a range of psychological and behavioral problems. However, it is unclear whether mindfulness serves to buffer these negative relationships. This study examines direct effects and mediation effects of personal distress and mindfulness among three measures of professional quality of life: compassion fatigue, burnout, and compassion satisfaction. This model was tested using a sample of clinical social workers (n = 171. Results indicated that higher personal distress is significantly associated with higher compassion fatigue and burnout and lower compassion satisfaction, while mindfulness is significantly associated with lower compassion fatigue and burnout and higher compassion satisfaction. Mediation analyses showed significant indirect effects on all three measures of professional quality of life, with effect sizes in the small to moderate range. The indirect effects of mindfulness via the personal distress path accounted for 14-22% of the total effect of mindfulness on the three measures of professional quality of life. Implications for the education and training of social workers are discussed.

  1. The European Urology Residents Education Programme Hands-on Training Format: 4 Years of Hands-on Training Improvements from the European School of Urology.

    Science.gov (United States)

    Somani, Bhaskar K; Van Cleynenbreugel, Ben; Gozen, Ali; Palou, Jaun; Barmoshe, Sas; Biyani, Shekhar; Gaya, Josep M; Hellawell, Giles; Pini, Gio; Oscar, Faba R; Sanchez Salas, Rafael; Macek, Petr; Skolarikos, Andreas; Wagner, Christian; Eret, Viktor; Haensel, Stephen; Siena, Giampaolo; Schmidt, Marek; Klitsch, Max; Vesely, Stepan; Ploumidis, Achilles; Proietti, Silvia; Kamphuis, Guido; Tokas, Theodore; Geraghty, Rob; Veneziano, Dominico

    2018-03-14

    The European School of Urology (ESU) started the European Urology Residents Education Programme (EUREP) in 2003 for final year urology residents, with hands-on training (HOT) added later in 2007. To assess the geographical reach of EUREP, trainee demographics, and individual quality feedback in relation to annual methodology improvements in HOT. From September 2014 to October 2017 (four EUREP courses) several new features have been applied to the HOT format of the EUREP course: 1:1 training sessions (2015), fixed 60-min time slots (2016), and standardised teaching methodology (2017). The resulting EUREP HOT format was verified by collecting and prospectively analysing the following data: total number of participants attending different HOT courses; participants' age; country of origin; and feedback obtained annually. A total of 796 participants from 54 countries participated in 1450 HOT sessions over the last 4 yr. This included 294 (20%) ureteroscopy (URS) sessions, 237 (16.5%) transurethral resection (TUR) sessions, 840 (58%) basic laparoscopic sessions, and 79 (5.5%) intermediate laparoscopic sessions. While 712 residents (89%) were from Europe, 84 (11%) were from non-European nations. Of the European residents, most came from Italy (16%), Germany (15%), Spain (15%), and Romania (8%). Feedback for the basic laparoscopic session showed a constant improvement in scores over the last 4 yr, with the highest scores achieved last year. This included feedback on improvements in tutor rating (p=0.017), organisation (ptraining curriculum with wet laboratory or cadaveric courses in this format, although these could be performed in other training centres in conjunction with EUREP. The EUREP trainee demographics show that the purpose of the course is being achieved, with excellent feedback reported. While European trainees dominate the demographics, participation from a number of non-European countries suggests continued ESU collaboration with other national societies and

  2. The use of a hands-on model in learning the regulation of an inducible operon and the development of a gene regulation concept inventory

    Science.gov (United States)

    Stefanski, Katherine M.

    A central concept in genetics is the regulation of gene expression. Inducible gene expression is often taught in undergraduate biology courses using the lac operon of Escherichia coli (E. coli ). With national calls for reform in undergraduate biology education and a body of literature that supports the use of active learning techniques including hands-on learning and analogies we were motivated to develop a hands-on analogous model of the lac operon. The model was developed over two iterations and was administered to genetics students. To determine the model's worth as a learning tool a concept inventory (CI) was developed using rigorous protocols. Concept inventories are valuable tools which can be used to assess students' understanding of a topic and pinpoint commonly held misconceptions as well as the value of educational tools. Through in-class testing (n =115) the lac operon concept inventory (LOCI) was demonstrated to be valid, predictive, and reliable (? coefficient = 0.994). LOCI scores for students who participated in the hands-on activity (n = 67) were 7.5% higher (t = -2.281, P operon. We were able to determine the efficacy of the activity and identify misconceptions held by students about the lac operon because of the use of a valid and reliable CI.

  3. Implementation of a Modular Hands-on Learning Pedagogy: Student Attitudes in a Fluid Mechanics and Heat Transfer Course

    Science.gov (United States)

    Burgher, J. K.; Finkel, D.; Adesope, O. O.; Van Wie, B. J.

    2015-01-01

    This study used a within-subjects experimental design to compare the effects of learning with lecture and hands-on desktop learning modules (DLMs) in a fluid mechanics and heat transfer class. The hands-on DLM implementation included the use of worksheets and one of two heat exchangers: an evaporative cooling device and a shell and tube heat…

  4. Embedding Hands-On Mini Laboratory Experiences in a Core Undergraduate Fluid Mechanics Course: A Pilot Study

    Science.gov (United States)

    Han, Duanduan; Ugaz, Victor

    2017-01-01

    Three self-contained mini-labs were integrated into a core undergraduate fluid mechanics course, with the goal of delivering hands-on content in a manner scalable to large class sizes. These mini-labs supported learning objectives involving friction loss in pipes, flow measurement, and centrifugal pump analysis. The hands-on experiments were…

  5. Seafloor Science and Remotely Operated Vehicle (SSROV) Day Camp: A Week-Long, Hands-On STEM Summer Camp

    Science.gov (United States)

    Wheat, C. G.; Fournier, T.; Monahan, K.; Paul, C.

    2015-12-01

    RETINA (Robotic Exploration Technologies IN Astrobiology) has developed a program geared towards stimulating our youth with innovative and relevant hands-on learning modules under a STEM umbrella. Given the breadth of potential science and engineering topics that excite children, the RETINA Program focuses on interactive participation in the design and development of simple robotic and sensor systems, providing a range of challenges to engage students through project-based learning (PBL). Thus, young students experience scientific discovery through the use and understanding of technology. This groundwork serves as the foundation for SSROV Camp, a week-long, summer day camp for 6th-8th grade students. The camp is centered on the sensors and platforms that guide seafloor exploration and discovery and builds upon the notion that transformative discoveries in the deep sea result from either sampling new environments or making new measurements with sensors adapted to this extreme environment. These technical and scientific needs are folded into the curriculum. Each of the first four days of the camp includes four team-based, hands-on technical challenges, communication among peer groups, and competition. The fifth day includes additional activities, culminating in camper-led presentations to describe a planned mission based on a given geologic setting. Presentations include hypotheses, operational requirements and expected data products. SSROV Camp was initiated last summer for three sessions, two in Monterey, CA and one in Oxford, MS. Campers from both regions grasped key elements of the program, based on written responses to questions before and after the camp. On average, 32% of the pre-test questions were answered correctly compared with 80% of the post-test questions. Additional confirmation of gains in campers' knowledge, skills, and critical thinking on environmental issues and engineering problems were apparent during the "jeopardy" competition, nightly homework

  6. Adapting a successful inquiry-based immersion program to create an Authentic, Hands- on, Field based Curriculum in Environmental Science at Barnard College

    Science.gov (United States)

    Kenna, T. C.; Pfirman, S.; Mailloux, B. J.; Martin, S.; Kelsey, R.; Bower, P.

    2008-12-01

    Adapting a successful inquiry-based immersion program to create an Authentic, Hands-on, Field based Curriculum in Environmental Science at Barnard College T. C. Kenna, S. Pfirman, B. J. Mailloux, M. Stute, R. Kelsey, and P. Bower By adapting a successful inquiry-based immersion program (SEA semester) to the typical college format of classes, we are improving the technical and quantitative skills of undergraduate women and minorities in environmental science and improving their critical thinking and problem-solving by exposing our students to open-ended real-world environmental issues. Our approach uses the Hudson River Estuary as a natural laboratory. In a series of hands-on inquiry-based activities, students use advanced equipment to collect data and samples. Each class session introduces new analytical and data analysis techniques. All classes have the connecting theme of the river. Working with real data is open-ended. Our major findings as indicated by surveys as well as journaling throughout the semester are that the field- based experience significantly contributed to student learning and engagement. Journaling responses indicated that nearly all students discussed the importance and excitement of an authentic research experience. Some students were frustrated with data irregularities, uncertainty in methods and data, and the general challenge of a curriculum with inherent ambiguity. The majority were satisfied with the aims of the course to provide an integrative experience. All students demonstrated transfer of learned skills. This project has had a significant impact on our undergraduate female students: several students have pursued senior thesis projects stemming from grant activities, stating that the field activities were the highlight of their semester. Some students love the experience and want more. Others decide that they want to pursue a different career. All learn how science is conducted and have a better foundation to understand concepts such

  7. The Hands-On Universe: Making Sense of the Universe with All Your Senses

    Science.gov (United States)

    Trotta, R.

    2018-02-01

    For the past four years, the Hands-On Universe public engagement programme has explored unconventional, interactive and multi-sensorial ways of communicating complex ideas in cosmology and astrophysics to a wide variety of audiences. The programme lead, Roberto Trotta, has reached thousands of people through food-based workshops, art and science collaborations and a book written using only the 1000 most common words in the English language. In this article, Roberto reflects in first person on what has worked well in the programme, and what has not.

  8. HSCI2014: booklet of the 11th International Conference on Hands-on Science

    OpenAIRE

    Costa, Manuel F. M., ed. lit.; Pombo, José Miguel Marques, ed. lit.; Vázquez Dorrío, José Benito, ed. lit.; International Conference on Hands-on Science, 11, Aveiro, 2014

    2014-01-01

    The core topic of the 11th Hands-on Science Conference is "Science Education with and for Society" As we all know it is the Society that sets the requirements rules and procedures of Education. It is Society that defines what citizens must learn in what concern either concepts and or competencies, and how this learning can, must in fact…, take place. Society is the ensemble of all of us citizens and of all the structures tangible and intangible we create and created along the y...

  9. The Opinions about Relationship between Students and Teachers in the Class of Hands-on

    Science.gov (United States)

    Pigultong, M.

    2018-02-01

    This research has the purpose to study on 1) Relationship between Students and Teachers in the Class of Hands - on and 2) Class Management at Rajamangala University of Technology Thanyaburi. The research consists of collecting information from 400 students who have valid student status in 2016 at Rajamangala University of Technology Thanyaburi. This research uses content analysis technique, Average (-X) and Standard Deviation to interpret the information. The results of the research focus on 2 topics 1) The Human relationship between Students and Teachers. The samples group had high expectations of human relationship (x=3.87). 2) Class Management. The samples group had high expectations of Class Management (x=3.88).

  10. Count like an egyptian a hands-on introduction to ancient mathematics

    CERN Document Server

    Reimer, David

    2014-01-01

    The mathematics of ancient Egypt was fundamentally different from our math today. Contrary to what people might think, it wasn't a primitive forerunner of modern mathematics. In fact, it can't be understood using our current computational methods. Count Like an Egyptian provides a fun, hands-on introduction to the intuitive and often-surprising art of ancient Egyptian math. David Reimer guides you step-by-step through addition, subtraction, multiplication, and more. He even shows you how fractions and decimals may have been calculated-they technically didn't exist in the land of the pharaohs.

  11. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Quality Assurance Manual

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; R. Nims; K. J. Kvarfordt; C. Wharton

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment using a personal computer running the Microsoft Windows operating system. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC). The role of the INL in this project is that of software developer and tester. This development takes place using formal software development procedures and is subject to quality assurance (QA) processes. The purpose of this document is to describe how the SAPHIRE software QA is performed for Version 6 and 7, what constitutes its parts, and limitations of those processes.

  12. Getting started with Oracle SOA B2B Integration a hands-on tutorial

    CERN Document Server

    Bhatia, Krishnaprem; Perlovsky, Alan

    2013-01-01

    This hands on tutorial gives you the best possible start you could hope for with Oracle B2B. Learn using real life scenarios and examples to give you a solid footing of B2B.This book is for B2B architects, consultants and developers who would like to design and develop B2B integrations using Oracle B2B. This book assumes no prior knowledge of Oracle B2B and explains all concepts from scratch using illustrations, real world examples and step-by-step instructions. The book covers enough depth and details to be useful for both beginner and advanced B2B users.

  13. Introduction to engineering a starter's guide with hands-on analog multimedia explorations

    CERN Document Server

    Karam, Lina

    2008-01-01

    This lecture provides a hands-on glimpse of the field of electrical engineering. The introduced applications utilize the NI ELVIS hardware and software platform to explore concepts such as circuits, power, analog sensing, and introductory analog signal processing such as signal generation, analog filtering, and audio and music processing. These principals and technologies are introduced in a very practical way and are fundamental to many of the electronic devices we use today. Some examples include photodetection, analog signal (audio, light, temperature) level meter, and analog music equalize

  14. Hands-on-Science: Using Education Research to Construct Learner-Centered Classes

    Science.gov (United States)

    Ludwig, R. R.; Chimonidou, A.; Kopp, S.

    2014-07-01

    Research into the process of learning, and learning astronomy, can be informative for the development of a course. Students are better able to incorporate and make sense of new ideas when they are aware of their own prior knowledge (Resnick et al. 1989; Confrey 1990), have the opportunity to develop explanations from their own experience in their own words (McDermott 1991; Prather et al. 2004), and benefit from peer instruction (Mazur 1997; Green 2003). Students in astronomy courses often have difficulty understanding many different concepts as a result of difficulties with spatial reasoning and a sense of scale. The Hands-on-Science program at UT Austin incorporates these research-based results into four guided-inquiry, integrated science courses (50 students each). They are aimed at pre-service K-5 teachers but are open to other majors as well. We find that Hands-on-Science students not only attain more favorable changes in attitude towards science, but they also outperform students in traditional lecture courses in content gains. Workshop Outcomes: Participants experienced a research-based, guided-inquiry lesson about the motion of objects in the sky and discussed the research methodology for assessing students in such a course.

  15. ADAM, a hands-on patient simulator for teaching principles of drug disposition and compartmental pharmacokinetics.

    Science.gov (United States)

    Zuna, Ines; Holt, Andrew

    2017-11-01

    To design, construct and validate a pharmacokinetics simulator that offers students hands-on opportunities to participate in the design, administration and analysis of oral and intravenous dosing regimens. The Alberta Drug Administration Modeller (ADAM) is a mechanical patient in which peristaltic circulation of water through a network of silicone tubing and glass bottles creates a representation of the outcomes of drug absorption, distribution, metabolism and elimination. Changing peristaltic pump rates and volumes in bottles allows values for pharmacokinetic constants to be varied, thereby simulating differences in drug properties and in patient physiologies and pathologies. Following administration of methylene blue dye by oral or intravenous routes, plasma and/or urine samples are collected and drug concentrations are determined spectrophotometrically. The effectiveness of the simulator in enhancing student competence and confidence was assessed in two undergraduate laboratory classes. The simulator effectively models one- and two-compartment drug behaviour in a mathematically-robust and realistic manner. Data allow calculation of numerous pharmacokinetic constants, by traditional graphing methods or with curve-fitting software. Students' competence in solving pharmacokinetic problems involving calculations and graphing improved significantly, while an increase in confidence and understanding was reported. The ADAM is relatively inexpensive and straightforward to construct, and offers a realistic, hands-on pharmacokinetics learning opportunity for students that effectively complements didactic lectures. © 2017 The Authors. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.

  16. Back to the future with hands-on science: students' perceptions of learning anatomy and physiology.

    Science.gov (United States)

    Johnston, Amy Nicole Burne; McAllister, Margaret

    2008-09-01

    This article examines student perceptions of learning related to anatomy and physiology in a bachelor of nursing program. One strategy to teach the sciences is simulated learning, a technology that offers exciting potential. Virtual environments for laboratory learning may offer numerous benefits: teachers can convey information to a larger group of students, reducing the need for small laboratory classes; less equipment is required, thus containing ongoing costs; and students can learn in their own time and place. However, simulated learning may also diminish access to the teacher-student relationship and the opportunity for guided practice and guided linking of theory with practice. Without this hands-on experience, there is a risk that students will not engage as effectively, and thus conceptual learning and the development of critical thinking skills are diminished. However, student perceptions of these learning experiences are largely unknown. Thus, this study examined students' perceptions of anatomy and physiology laboratory experiences and the importance they placed on hands-on experience in laboratory settings.

  17. 3D printed simulation models based on real patient situations for hands-on practice.

    Science.gov (United States)

    Kröger, E; Dekiff, M; Dirksen, D

    2017-11-01

    During the last few years, the curriculum of many dentistry schools in Germany has been reorganised. Two key aspects of the applied changes are the integration of up-to-date teaching methods and the promotion of interdisciplinarity. To support these efforts, an approach to fabricating individualised simulation models for hands-on courses employing 3D printing is presented. The models are based on real patients, thus providing students a more realistic preparation for real clinical situations. As a wide variety of dental procedures can be implemented, the simulation models can also contribute to a more interdisciplinary dental education. The data used for the construction of the models were acquired by 3D surface scanning. The data were further processed with 3D modelling software. Afterwards, the models were fabricated by 3D printing with the PolyJet technique. Three models serve as examples: a prosthodontic model for training veneer preparation, a conservative model for practicing dental bonding and an interdisciplinary model featuring carious teeth and an insufficient crown. The third model was evaluated in a hands-on course with 22 fourth-year dental students. The students answered a questionnaire and gave their personal opinion. Whilst the concept of the model received very positive feedback, some aspects of the implementation were criticised. We discuss these observations and suggest ways for further improvement. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  18. Withholding answers during hands-on scientific investigations? Comparing effects on developing students' scientific knowledge, reasoning, and application

    Science.gov (United States)

    Zhang, Lin

    2018-03-01

    As more concerns have been raised about withholding answers during science teaching, this article argues for a need to detach 'withholding answers' from 'hands-on' investigation tasks. The present study examined students' learning of light-related content through three conditions: 'hands-on' + no 'withholding' (hands-on only: HO), 'hands-on' + 'withholding' (hands-on investigation with answers withheld: HOW), and no 'hands-on' + no 'withholding' (direction instruction: DI). Students were assessed in terms of how well they (1) knew the content taught in class; (2) reasoned with the learned content; and (3) applied the learned content to real-life situations. Nine classes of students at 4th and 5th grades, N = 136 in total, were randomly assigned to one of the three conditions. ANCOVA results showed that students in the hands-on only condition reasoned significantly better than those in the other two conditions. Students in this condition also seemed to know the content fairly better although the advance was not significant. Students in all three conditions did not show a statistically significant difference in their ability to apply the learned content to real-life situations. The findings from this study provide important contributions regarding issues relating to withholding answers during guided scientific inquiry.

  19. Hands-On Open Access Broadband Wireless Technology Lab Mapping Course Outcomes to Lab Experiments

    Directory of Open Access Journals (Sweden)

    Yazan Alqudah

    2012-10-01

    Full Text Available The unprecedented growth in wireless communication is offering opportunities and challenges for educators. Thanks to technology advances and job opportunities, more and more students are interested in wireless communications courses. However, bridging the gap between classroom and real-world experience remains a challenge. Advanced undergraduate communications courses typically focus more on theory. Some courses are given online, and lack hands-on experiments. Driven by feedback from industry and students, we propose practical laboratory experiments that attempt to bridge the gap between classroom and real world. The laboratory exercises take advantage of the infrastructure of deployed wireless networks and allow students to measure, and analyze data, as well as to interact. The proposed labs can be used even in online courses. This paper describes the experiments proposed, the procedures and typical results. The experiments are tied to course objective.

  20. Exploring the Solar System in the Classroom: A Hands-On Approach

    Science.gov (United States)

    Coombs, Cassandra R.

    2000-01-01

    This final report discusses the development and implementation of several educational products for K-16 teachers and students. Specifically, I received support for: (A) three K-12 Teacher workshops, Exploring the Solar System in the Classroom: A Hands-On Approach, and minimal Support to finish two computer-based tutorials. (B) Contact Light: An Interactive CD-ROM, and (C) Another Look at Taurus Littrow: An Interactive GIS Database. Each of these projects directly supports NASA's Strategic Plan to: "Involve the education community in our endeavors to inspire America's students, create learning opportunities, enlighten inquisitive minds", and, to "communicate widely the content, relevancy, and excitement of NASA's missions and discoveries to inspire and to increase understanding and the broad application of science and technology." Attachment: Appendix A. And also article: "Aristarchus plateau: as potential lunar base site."

  1. Fundamentals of endoscopic surgery: creation and validation of the hands-on test.

    Science.gov (United States)

    Vassiliou, Melina C; Dunkin, Brian J; Fried, Gerald M; Mellinger, John D; Trus, Thadeus; Kaneva, Pepa; Lyons, Calvin; Korndorffer, James R; Ujiki, Michael; Velanovich, Vic; Kochman, Michael L; Tsuda, Shawn; Martinez, Jose; Scott, Daniel J; Korus, Gary; Park, Adrian; Marks, Jeffrey M

    2014-03-01

    The Fundamentals of Endoscopic Surgery™ (FES) program consists of online materials and didactic and skills-based tests. All components were designed to measure the skills and knowledge required to perform safe flexible endoscopy. The purpose of this multicenter study was to evaluate the reliability and validity of the hands-on component of the FES examination, and to establish the pass score. Expert endoscopists identified the critical skill set required for flexible endoscopy. They were then modeled in a virtual reality simulator (GI Mentor™ II, Simbionix™ Ltd., Airport City, Israel) to create five tasks and metrics. Scores were designed to measure both speed and precision. Validity evidence was assessed by correlating performance with self-reported endoscopic experience (surgeons and gastroenterologists [GIs]). Internal consistency of each test task was assessed using Cronbach's alpha. Test-retest reliability was determined by having the same participant perform the test a second time and comparing their scores. Passing scores were determined by a contrasting groups methodology and use of receiver operating characteristic curves. A total of 160 participants (17 % GIs) performed the simulator test. Scores on the five tasks showed good internal consistency reliability and all had significant correlations with endoscopic experience. Total FES scores correlated 0.73, with participants' level of endoscopic experience providing evidence of their validity, and their internal consistency reliability (Cronbach's alpha) was 0.82. Test-retest reliability was assessed in 11 participants, and the intraclass correlation was 0.85. The passing score was determined and is estimated to have a sensitivity (true positive rate) of 0.81 and a 1-specificity (false positive rate) of 0.21. The FES hands-on skills test examines the basic procedural components required to perform safe flexible endoscopy. It meets rigorous standards of reliability and validity required for high

  2. A Hands-on Physical Analog Demonstration of Real-Time Volcano Deformation Monitoring with GNSS/GPS

    Science.gov (United States)

    Jones, J. R.; Schobelock, J.; Nguyen, T. T.; Rajaonarison, T. A.; Malloy, S.; Njinju, E. A.; Guerra, L.; Stamps, D. S.; Glesener, G. B.

    2017-12-01

    Teaching about volcano deformation and how scientists study these processes using GNSS/GPS may present some challenge since the volcanoes and/or GNSS/GPS equipment are not quite accessible to most teachers. Educators and curriculum materials specialists have developed and shared a number of activities and demonstrations to help students visualize volcanic processes and ways scientist use GNSS/GPS in their research. From resources provided by MEDL (the Modeling and Educational Demonstrations Laboratory) in the Department of Geosciences at Virginia Tech, we combined multiple materials and techniques from these previous works to produce a hands-on physical analog model from which students can learn about GNSS/GPS studies of volcano deformation. The model functions as both a qualitative and quantitative learning tool with good analogical affordances. In our presentation, we will describe multiple ways of teaching with the model, what kinds of materials can be used to build it, and ways we think the model could be enhanced with the addition of Vernier sensors for data collection.

  3. Studies of Limits on Uncontrolled Heavy Ion Beam Losses for Allowing Hands-On Maintenance. Final report

    International Nuclear Information System (INIS)

    Ronningen, Reginald M.; Remec, Igor

    2010-01-01

    Dose rates from accelerator components activated by 1 W/m beam losses are obtained semiempirically for a 1 GeV proton beam and by use of Monte Carlo transport codes for the proton beam and for 777 MeV/u 3He, 500 MeV/u 48Ca, 86Kr, 136Xe, and 400 MeV/u 238U ions. The dose rate obtained by the semi-empirical method, 0.99 mSv/h (99 mrem/h) at 30 cm, 4 h after 100 d irradiation by a 1-GeV proton beam, is consistent with studies at several accelerator facilities and with adopted hands-on maintenance dose rate limits. Monte Carlo simulations verify this result for protons and extend studies to heavy ion beam losses in drift-tube linac and superconducting linac accelerating structures. The studies indicate that the 1 W/m limit imposed on uncontrolled beam losses for high-energy proton beams might be relaxed for heavy ion beams. These studies further suggest that using the ratio of neutrons produced by a heavy ion beam to neutrons produced by a proton beam along with the dose rate from the proton beam (for thin-target scenarios) should allow an estimate of the dose rates expected from heavy ion beam losses.

  4. Kids Making Sense of Air Quality Around Them Through a Hands-On, STEM-Based Program

    Science.gov (United States)

    Dye, T.

    2015-12-01

    Air pollution in many parts of the world is harming millions of people, shortening lives, and taking a toll on our ecosystem. Cities in India, China, and even the United States frequently exceed air quality standards. The use of localized data is a powerful enhancement to regulatory monitoring site data. Learning about air quality at a local level is a powerful driver for change. The Kids Making Sense program unites Science, Technology, Engineering, and Mathematics (STEM) education with a complete measurement and environmental education system that teaches youth about air pollution and empowers them to drive positive change in their communities. With this program, youth learn about particle pollution, its sources, and health effects. A half-day lecture is followed by hands-on activity using handheld air sensors paired with an app on smartphones. Students make measurements around schools to discover pollution sources and cleaner areas. Next, the data they collect are crowdsourced on a website for guided discussion and data interpretation. This program meets Next Generation Science Standards, encourages project-based learning and deep understanding of applied science, and allows students to practice science like real scientists. The program has been successfully implemented in several schools in the United States and Asia, including New York City, San Francisco, Los Angeles, and Sacramento in the United States, and Taipei and Taichung in Taiwan. During this talk, we'll provide an overview of the program, discuss some of the challenges, and lay out the next steps for Kids Making Sense.

  5. Cognitive Achievement and Motivation in Hands-on and Teacher-Centred Science Classes: Does an additional hands-on consolidation phase (concept mapping) optimise cognitive learning at work stations?

    Science.gov (United States)

    Gerstner, Sabine; Bogner, Franz X.

    2010-05-01

    Our study monitored the cognitive and motivational effects within different educational instruction schemes: On the one hand, teacher-centred versus hands-on instruction; on the other hand, hands-on instruction with and without a knowledge consolidation phase (concept mapping). All the instructions dealt with the same content. For all participants, the hands-on approach as well as the concept mapping adaptation were totally new. Our hands-on approach followed instruction based on "learning at work stations". A total of 397 high-achieving fifth graders participated in our study. We used a pre-test, post-test, retention test design both to detect students' short-term learning success and long-term learning success, and to document their decrease rates of newly acquired knowledge. Additionally, we monitored intrinsic motivation. Although the teacher-centred approach provided higher short-term learning success, hands-on instruction resulted in relatively lower decrease rates. However, after six weeks, all students reached similar levels of newly acquired knowledge. Nevertheless, concept mapping as a knowledge consolidation phase positively affected short-term increase in knowledge. Regularly placed in instruction, it might increase long-term retention rates. Scores of interest, perceived competence and perceived choice were very high in all the instructional schemes.

  6. LIB LAB the Library Laboratory: hands-on multimedia science communication

    Science.gov (United States)

    Fillo, Aaron; Niemeyer, Kyle

    2017-11-01

    Teaching scientific research topics to K-12 audiences in an engaging and meaningful way does not need to be hard; with the right insight and techniques it can be fun to encourage self-guided STEAM (science, technology, engineering, arts, and mathematics) exploration. LIB LAB, short for Library Laboratory, is an educational video series produced by Aaron J. Fillo at Oregon State University in partnership with the Corvallis-Benton County Public Library targeted at K-12 students. Each episode explores a variety of scientific fundamentals with playful experiments and demonstrations. The video lessons are developed using evidence-based practices such as dispelling misconceptions, and language immersion. Each video includes directions for a related experiment that young viewers can conduct at home. In addition, science kits for these at-home experiments are distributed for free to students through the public library network in Benton County, Oregon. This talk will focus on the development of multimedia science education tools and several techniques that scientists can use to engage with a broad audience more effectively. Using examples from the LIB LAB YouTube Channel and collection of hands-on science demonstrations and take-home kits, this talk will present STEAM education in action. Corvallis-Benton County Public Library.

  7. Hands-On Math and Art Exhibition Promoting Science Attitudes and Educational Plans

    Directory of Open Access Journals (Sweden)

    Helena Thuneberg

    2017-01-01

    Full Text Available The current science, technology, engineering, art, math education (STEAM approach emphasizes integration of abstract science and mathematical ideas for concrete solutions by art. The main aim was to find out how experience of learning mathematics differed between the contexts of school and an informal Math and Art Exhibition. The study participants (N=256 were 12-13 years old from Finland. Several valid questionnaires and tests were applied (e.g., SRQ-A, RAVEN in pre- and postdesign showing a good reliability. The results based on General Linear Modeling and Structural Equation Path Modeling underline the motivational effects. The experience of the effectiveness of hands-on learning at school and at the exhibition was not consistent across the subgroups. The lowest achieving group appreciated the exhibition alternative for math learning compared to learning math at school. The boys considered the exhibition to be more useful than the girls as it fostered their science and technology attitudes. However, for the girls, the attractiveness of the exhibition, the experienced situation motivation, was much more strongly connected to the attitudes on science and technology and the worthiness of mathematics. Interestingly, the pupils experienced that even this short informal learning intervention affected their science and technology attitudes and educational plans.

  8. Evaluation of hands-on seminar for reduced port surgery using fresh porcine cadaver model

    Directory of Open Access Journals (Sweden)

    Saseem Poudel

    2016-01-01

    Full Text Available Background: The use of various biological and non-biological simulators is playing an important role in training modern surgeons with laparoscopic skills. However, there have been few reports of the use of a fresh porcine cadaver model for training in laparoscopic surgical skills. The purpose of this study was to report on a surgical training seminar on reduced port surgery using a fresh cadaver porcine model and to assess its feasibility and efficacy. Materials and Methods: The hands-on seminar had 10 fresh porcine cadaver models and two dry boxes. Each table was provided with a unique access port and devices used in reduced port surgery. Each group of 2 surgeons spent 30 min at each station, performing different tasks assisted by the instructor. The questionnaire survey was done immediately after the seminar and 8 months after the seminar. Results: All the tasks were completed as planned. Both instructors and participants were highly satisfied with the seminar. There was a concern about the time allocated for the seminar. In the post-seminar survey, the participants felt that the number of reduced port surgeries performed by them had increased. Conclusion: The fresh cadaver porcine model requires no special animal facility and can be used for training in laparoscopic procedures.

  9. Evaluation of hands-on seminar for reduced port surgery using fresh porcine cadaver model.

    Science.gov (United States)

    Poudel, Saseem; Kurashima, Yo; Shichinohe, Toshiaki; Kitashiro, Shuji; Kanehira, Eiji; Hirano, Satoshi

    2016-01-01

    The use of various biological and non-biological simulators is playing an important role in training modern surgeons with laparoscopic skills. However, there have been few reports of the use of a fresh porcine cadaver model for training in laparoscopic surgical skills. The purpose of this study was to report on a surgical training seminar on reduced port surgery using a fresh cadaver porcine model and to assess its feasibility and efficacy. The hands-on seminar had 10 fresh porcine cadaver models and two dry boxes. Each table was provided with a unique access port and devices used in reduced port surgery. Each group of 2 surgeons spent 30 min at each station, performing different tasks assisted by the instructor. The questionnaire survey was done immediately after the seminar and 8 months after the seminar. All the tasks were completed as planned. Both instructors and participants were highly satisfied with the seminar. There was a concern about the time allocated for the seminar. In the post-seminar survey, the participants felt that the number of reduced port surgeries performed by them had increased. The fresh cadaver porcine model requires no special animal facility and can be used for training in laparoscopic procedures.

  10. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE), Version 5.0

    International Nuclear Information System (INIS)

    Russell, K.D.; Kvarfordt, K.J.; Hoffman, C.L.

    1995-10-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The Graphical Evaluation Module (GEM) is a special application tool designed for evaluation of operational occurrences using the Accident Sequence Precursor (ASP) program methods. GEM provides the capability for an analyst to quickly and easily perform conditional core damage probability (CCDP) calculations. The analyst can then use the CCDP calculations to determine if the occurrence of an initiating event or a condition adversely impacts safety. It uses models and data developed in the SAPHIRE specially for the ASP program. GEM requires more data than that normally provided in SAPHIRE and will not perform properly with other models or data bases. This is the first release of GEM and the developers of GEM welcome user comments and feedback that will generate ideas for improvements to future versions. GEM is designated as version 5.0 to track GEM codes along with the other SAPHIRE codes as the GEM relies on the same, shared database structure

  11. Will medical examination gloves protect rescuers from defibrillation voltages during hands-on defibrillation?

    Science.gov (United States)

    Sullivan, Joseph L; Chapman, Fred W

    2012-12-01

    Continuing compressions during a defibrillation shock has been proposed as a method of reducing pauses in cardiopulmonary resuscitation (CPR) but the safety of this procedure is unproven. The medical examination gloves worn by rescuers play an important role in protecting the rescuer yet the electrical characteristics of these gloves are unknown. This study examined the response of medical examination gloves to defibrillation voltages. Part 1 of this study measured voltage-current curves for a small sample (8) of gloves. Part 2 tested more gloves (460) to determine the voltage required to produce a specific amount of current flow. Gloves were tested at two current levels: 0.1 mA and 10 mA. Testing included four glove materials (chloroprene, latex, nitrile, and vinyl) in a single layer and double-gloved. All gloves tested in part 1 allowed little current to flow (gloves and 93 of 120 (77%) double gloves allowed at least 0.1 mA of current flow at voltages within the external defibrillation voltage range. Also, 6 of 80 (7.5%) single gloves and 5 of 80 (6.2%) double gloves allowed over 10 mA. Few of the gloves tested limited the current to levels proven to be safe. A lack of sensation during hands-on defibrillation does not guarantee that a safety margin exists. As such, we encourage rescuers to minimize rather than eliminate the pause in compressions for defibrillation. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  12. Hands-on guide for 3D image creation for geological purposes

    Science.gov (United States)

    Frehner, Marcel; Tisato, Nicola

    2013-04-01

    -cyan anaglyphs is their simplicity and the possibility to print them on normal paper or project them using a conventional projector. Producing 3D stereoscopic images is much easier than commonly thought. Our hands-on poster provides an easy-to-use guide for producing 3D stereoscopic images. Few simple rules-of-thumb are presented that define how photographs of any scene or object have to be shot to produce good-looking 3D images. We use the free software Stereophotomaker (http://stereo.jpn.org/eng/stphmkr) to produce anaglyphs and provide red-cyan 3D glasses for viewing them. Our hands-on poster is easy to adapt and helps any geologist to present his/her field or hand specimen photographs in a much more fashionable 3D way for future publications or conference posters.

  13. The Role of Hands-On Science Labs in Engaging the Next Generation of Space Explorers

    Science.gov (United States)

    Williams, Teresa A. J.

    2002-01-01

    Each country participating on the International Space Station (ISS) recognizes the importance of educating the coming generation about space and its opportunities. In 2001 the St. James School in downtown Houston, Texas was approached with a proposal to renovate an unused classroom and become involved with the "GLOBE" Program and other Internet based international learning resources. This inner-city school willingly agreed to the program based on "hands-on" learning. One month after room conversion and ten computer terminals donated by area businesses connectivity established to the internet the students immediately began using the "Global Learning and Observations to Benefit the Environment (GLOBE)" program and the International Space Station (ISS) Program educational resources. The "GLOBE" program involves numerous scientific and technical agencies studying the Earth, who make it their goal to provide educational resources to an international community of K-12 scientist. This project was conceived as a successor to the "Interactive Elementary Space Museum for the New Millennium" a space museum in a school corridor without the same type of budget. The laboratory is a collaboration, which involved area businesses, volunteers from the NASA/Johnson Space Center ISS Outreach Program, and students. This paper will outline planning and operation of the school science laboratory project from the point of view of the schools interest and involvement and assess its success to date. It will consider the lessons learned by the participating school administrations in the management of the process and discuss some of the issues that can both promote and discourage school participation in such projects.

  14. Design, implementation, and outcome of a hands-on arthrocentesis workshop.

    Science.gov (United States)

    Barilla-Labarca, Maria-Louise; Tsang, James C; Goldsmith, Melissa; Furie, Richard

    2009-09-01

    During a 4-week rheumatology elective at our institution, opportunities for internal medicine residents to perform arthrocentesis were limited, particularly for sites other than the knee. Consequently, residents were inadequately prepared and had less self-confidence to perform such procedures. To overcome these educational deficiencies, an arthrocentesis workshop was developed. We report our quality improvement data that was collected during the first year of workshop implementation. We devised a structured half-day arthrocentesis workshop for rheumatology fellows as well as rotating internal medicine residents. This program consisted of a one hour lecture immediately followed by a hands-on workshop that used mannequin models for 5 anatomic sites. A self-assessment questionnaire and medical knowledge test were administered before and after each session. The accuracy of the self-assessment questionnaire was analyzed by comparing responses to an external objective measure of knowledge in the same content area. Finally, an optional postworkshop survey addressed resident satisfaction. Thirty-eight trainees participated in the workshop between July 2006 and June 2007. There were statistically significant improvements in self-confidence in 9 content areas (P knowledge test during the preworkshop analysis. In contrast, the postworkshop analysis displayed modestly higher concordance. All residents completing a postworkshop survey believed that it was a useful exercise, and 96% stated that they would change their practice habits. The arthrocentesis workshop provided a solid foundation from which trainees can learn key concepts of joint injection, increase their self-confidence and refine their motor skills. The accuracy of resident self-reported confidence is poor and should therefore be used only to complement other means of competency assessment and medical knowledge acquisition.

  15. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE) version 5.0

    International Nuclear Information System (INIS)

    Russell, K.D.; Kvarfordt, K.J.; Skinner, N.L.; Wood, S.T.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. This volume is the reference manual for the Systems Analysis and Risk Assessment (SARA) System Version 5.0, a microcomputer-based system used to analyze the safety issues of a open-quotes familyclose quotes [i.e., a power plant, a manufacturing facility, any facility on which a probabilistic risk assessment (PRA) might be performed]. The SARA database contains PRA data primarily for the dominant accident sequences of a family and descriptive information about the family including event trees, fault trees, and system model diagrams. The number of facility databases that can be accessed is limited only by the amount of disk storage available. To simulate changes to family systems, SARA users change the failure rates of initiating and basic events and/or modify the structure of the cut sets that make up the event trees, fault trees, and systems. The user then evaluates the effects of these changes through the recalculation of the resultant accident sequence probabilities and importance measures. The results are displayed in tables and graphs that may be printed for reports. A preliminary version of the SARA program was completed in August 1985 and has undergone several updates in response to user suggestions and to maintain compatibility with the other SAPHIRE programs. Version 5.0 of SARA provides the same capability as earlier versions and adds the ability to process unlimited cut sets; display fire, flood, and seismic data; and perform more powerful cut set editing

  16. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2008-08-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system’s response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for transforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). SAPHIRE includes a separate module called the Graphical Evaluation Module (GEM). GEM provides a highly specialized user interface with SAPHIRE that automates SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events in a very efficient and expeditious manner. This reference guide will introduce the SAPHIRE Version 7.0 software. A brief discussion of the purpose and history of the software is included along with

  17. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Smith; K. J. Kvarfordt; S. T. Wood

    2006-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system’s response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for ansforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). SAPHIRE includes a separate module called the Graphical Evaluation Module (GEM). GEM provides a highly specialized user interface with SAPHIRE that automates SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events in a very efficient and expeditious manner. This reference guide will introduce the SAPHIRE Version 7.0 software. A brief discussion of the purpose and history of the software is included along with

  18. Hands-on earth science with students at schools for the Deaf

    Science.gov (United States)

    Cooke, M. L.

    2011-12-01

    Earth science teachers at schools for the Deaf face a variety of challenges. This community of students has a wide range of language skills, teaching resources can be limited and often teachers are not trained in geosciences. An NSF CAREER grant provided an opportunity to make a difference to this community and foster earth science learning at 8 schools for the Deaf around the country. We designed hands-on deformational sandboxes for the teachers and provided accompanying curriculum materials. The sandbox is a physical model of crustal deformation that students can manipulate to test hypotheses. The visual nature of the sandbox was well-suited for the spatial grammar of American Sign Language used by these students. Furthermore, language skills were enhanced by scaffolded observation, sketch, annotation, discussion, interpretation assignments. Geoscience training of teachers was strengthened with workshops and three 5-day field trips for teachers and selected students to Utah, western New England and southern California. The field trips provided opportunity for students to work as geoscientists observing, interpreting, discussing and presenting their investigations. Between field trips, we set up videoconferences from the UMass experimental lab with the high school earth science classrooms. These sessions facilitated dialog between students and researchers at UMass. While the project set out to provide geoscience learning opportunities for students at Schools for the Deaf, the long lasting impact was the improved geoscience training of teachers, most of whom had limited post-secondary earth science training. The success of the project also rested on the dedication of the teachers to their students and their willingness to try new approaches and experiences. By tapping into a community of 6 teachers, who already shared curriculum and had fantastic leadership, the project was able to have significant impact and exceed the initial goals. The project has led to a

  19. The Chemical Engineering behind How Carbonated Beverages Go Flat: A Hands-On Experiment for Freshmen Students

    Science.gov (United States)

    Hohn, Keith L.

    2007-01-01

    A hands-on project was developed to educate new chemical engineering students about the types of problems chemical engineers solve and to improve student enthusiasm for studying chemical engineering. In this project, students studied the phenomenon of carbonated beverages going flat. The project was implemented in 2003 and 2004 at Kansas State…

  20. Self-Assembly and Nanotechnology: Real-Time, Hands-On, and Safe Experiments for K-12 Students

    Science.gov (United States)

    Bagaria, Hitesh G.; Dean, Michelle R.; Nichol, Carolyn A.; Wong, Michael S.

    2011-01-01

    What students and teachers often ask is, how are nano-sized materials made when they are so small? One answer is through the process of self-assembly in which molecules, polymers, and nanoparticles connect to form larger objects of a defined structure and shape. Two hands-on experiments are presented in which students prepare capsules in real time…

  1. Blended Inquiry with Hands-On and Virtual Laboratories: The Role of Perceptual Features during Knowledge Construction

    Science.gov (United States)

    Toth, Eva Erdosne; Ludvico, Lisa R.; Morrow, Becky L.

    2014-01-01

    This study examined the characteristics of virtual and hands-on inquiry environments for the development of blended learning in a popular domain of bio-nanotechnology: the separation of different-sized DNA fragments using gel-electrophoresis, also known as DNA-fingerprinting. Since the latest scientific developments in nano- and micro-scale tools…

  2. How Science Texts and Hands-on Explorations Facilitate Meaning Making: Learning from Latina/o Third Graders

    Science.gov (United States)

    Varelas, Maria; Pieper, Lynne; Arsenault, Amy; Pappas, Christine C.; Keblawe-Shamah, Neveen

    2014-01-01

    In this study, we examined opportunities for reasoning and meaning making that read-alouds of children's literature science information books and related hands-on explorations offered to young Latina/o students in an urban public school. Using a qualitative, interpretative framework, we analyzed classroom discourse and children's writing…

  3. Effects of In-Class Hands-On Laboratories in a Large Enrollment, Multiple Section Blended Linear Circuits Course

    Science.gov (United States)

    Ferri, Bonni H.; Ferri, Aldo A.; Majerich, David M.; Madden, Amanda G.

    2016-01-01

    This paper examines the effects of hands-on learning in an undergraduate circuits class that is taught to non-majors; i.e., students outside of electrical and computing engineering. The course, ECE3710, is taught in a blended format facilitated by the video lectures prepared for two Massive Open Online Courses developed for the Coursera Platform.…

  4. Chemistry Science Investigation: Dognapping Workshop, an Outreach Program Designed to Introduce Students to Science through a Hands-On Mystery

    Science.gov (United States)

    Boyle, Timothy J.; Sears, Jeremiah M.; Hernandez-Sanchez, Bernadette A.; Casillas, Maddison R.; Nguyen, Thao H.

    2017-01-01

    The Chemistry Science Investigation: Dognapping Workshop was designed to (i) target and inspire fourth grade students to view themselves as "Junior Scientists" before their career decisions are solidified; (ii) enable hands-on experience in fundamental scientific concepts; (iii) increase public interaction with science, technology,…

  5. Comparison of online, hands-on, and a combined approach for teaching cautery disbudding technique to dairy producers.

    Science.gov (United States)

    Winder, Charlotte B; LeBlanc, Stephen J; Haley, Derek B; Lissemore, Kerry D; Godkin, M Ann; Duffield, Todd F

    2018-01-01

    The use of pain control for disbudding and dehorning is important from both an animal and industry perspective. Best practices include the use of local anesthetic, commonly given as a cornual nerve block (CNB), and a nonsteroidal anti-inflammatory drug. The proportion is decreasing, but many dairy producers do not use local anesthesia, perhaps in part due to lack of knowledge of the CNB technique. Although this skill is typically learned in person from a veterinarian, alternative methods may be useful. The objective of this trial was to determine if there were differences in the efficacy of online training (n = 23), hands-on training (n = 20), and a combined approach (n = 23) for teaching producers to successfully administer a CNB and disbud a calf. The primary outcome was block efficacy, defined as a lack of established pain behaviors during iron application. Secondary outcomes were background knowledge (assessed by a written quiz), CNB and disbudding technique (evaluated by rubric scoring), time taken, and self-confidence before and after evaluation. Associations between training group and outcome were assessed with logistic regression, ordered logistic regression, and Cox-proportional hazard models, with a random effect for workshop. Block efficacy was not different between training groups, with 91% successful in both combined and online groups, and 75% in the hands-on trained group. Online learners had poorer technical scores than hands-on trainees. The combined group was not different from hands-on. Time to block completion tended to be longer for the online group (62 ± 11 s), whereas time to disbudding completion was not different between hands-on (41 ± 5 s) or combined trainees (41 ± 5 s). The combined group had the highest pre-evaluation confidence score, and remained higher after evaluation than online but was not different than hands-on. Although we saw some statistical differences between groups, absolute differences were small and block efficacy was

  6. A MEDL Collection Showcase: A Collection of Hands-on Physical Analog Models and Demonstrations From the Department of Geosciences MEDL at Virginia Tech

    Science.gov (United States)

    Glesener, G. B.

    2017-12-01

    The Geosciences Modeling and Educational Demonstrations Laboratory (MEDL) will present a suite of hands-on physical analog models from our curriculum materials collection used to teach about a wide range of geoscience processes. Many of the models will be equipped with Vernier data collection sensors, which visitors will be encouraged to explore on-site. Our goal is to spark interest and discussion around the affordances of these kinds of curriculum materials. Important topics to discuss will include: (1) How can having a collection of hands-on physical analog models be used to effectively produce successful broader impacts activities for research proposals? (2) What kinds of learning outcomes have instructors observed when teaching about temporally and spatially challenging concepts using physical analog models? (3) What does it take for an institution to develop their own MEDL collection? and (4) How can we develop a community of individuals who provide on-the-ground support for instructors who use physical analog models in their classroom.

  7. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE)

    International Nuclear Information System (INIS)

    C. L. Smith

    2006-01-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer (PC) running the Microsoft Windows operating system. SAPHIRE is primarily funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). INL's primary role in this project is that of software developer and tester. However, INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users, who constitute a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system's response to initiating events and quantify associated consequential outcome frequencies. Specifically, for nuclear power plant applications, SAPHIRE can identify important contributors to core damage (Level 1 PRA) and containment failure during a severe accident which lead to releases (Level 2 PRA). It can be used for a PRA where the reactor is at full power, low power, or at shutdown conditions. Furthermore, it can be used to analyze both internal and external initiating events and has special features for transforming an internal events model to a model for external events, such as flooding and fire analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to the public and environment (Level 3 PRA). SAPHIRE also includes a separate module called the Graphical Evaluation Module (GEM). GEM is a special user interface linked to SAPHIRE that automates the SAPHIRE process steps for evaluating operational events at commercial nuclear power plants. Using GEM, an analyst can estimate the risk associated with operational events (for example, to calculate a conditional core damage probability) very efficiently and expeditiously. This report provides an overview of the functions

  8. Hands-On Math: Manipulative Math for Young Children. Ages 3-6.

    Science.gov (United States)

    Stone, Janet I.

    Provided are 121 mathematics activities for children aged 3 to 6. Sections include: (1) "Introduction" (describing how to use the book, how to communication with parents, what materials are needed, and how to begin, and also indicating cross-curriculum areas); (2) "Shapes" (describing 20 activities that provide children with an awareness of…

  9. A Hands-on Exploration of the Retrograde Motion of Mars as Seen from the Earth

    Science.gov (United States)

    Pincelli, M. M.; Otranto, S.

    2013-01-01

    In this paper, we propose a set of activities based on the use of a celestial simulator to gain insights into the retrograde motion of Mars as seen from the Earth. These activities provide a useful link between the heliocentric concepts taught in schools and those tackled in typical introductory physics courses based on classical mechanics for…

  10. Hands-on science methods class for pre-service elementary teachers

    Energy Technology Data Exchange (ETDEWEB)

    Manner, B.M. [Univ. of Pittsburgh, PA (United States)

    1994-12-31

    If elementary teachers are to be comfortable teaching science, they must have positive pre-service experiences. A science methods class that is activity-based and student-centered, rather than lecture-based and teacher-centered, peaks their interest in science and alleviates their fears. Activities conducted by the students illustrate science concepts or integrate science with children`s literature books such as The Grouchy Ladybug. These activities are conducted by each student with the rest of the class and the professor acting as an elementary class. Each activity is then evaluated as to the science concept, what was done well, and how it could be improved. The students also relate how the activity would be integrated with other subjects such as social studies, art, math, and language arts. Student feedback indicates this method is enjoyable, educational, and valuable in preparing them to teach science. The {open_quotes}oohs{close_quotes} and {open_quotes}I didn`t know that!{close_quotes} during activities are positives, but students have also learned some science, lost most of their science anxiety, and will teach science with the confidence and enthusiasm that was lacking at the beginning of the course.

  11. Hands-On Defibrillation Skills of Pediatric Acute Care Providers During a Simulated Ventricular Fibrillation Cardiac Arrest Scenario.

    Science.gov (United States)

    Bhalala, Utpal S; Balakumar, Niveditha; Zamora, Maria; Appachi, Elumalai

    2018-01-01

    Introduction: Timely defibrillation in ventricular fibrillation cardiac arrest (VFCA) is associated with good outcome. While defibrillation skills of pediatric providers have been reported to be poor, the factors related to poor hands-on defibrillation skills of pediatric providers are largely unknown. The aim of our study was to evaluate delay in individual steps of the defibrillation and human and non-human factors associated with poor hands-on defibrillation skills among pediatric acute care providers during a simulated VFCA scenario. Methods: We conducted a prospective observational study of video evaluation of hands-on defibrillation skills of pediatric providers in a simulated VFCA in our children's hospital. Each provider was asked to use pads followed by paddles to provide 2 J/kg shock to an infant mannequin in VFCA. The hands-on skills were evaluated for struggle with any step of defibrillation, defined a priori as >10 s delay with particular step. The data was analyzed using chi-square test with significant p -value 10 s delay) with each of connecting the pads/paddles to the device, using pads/paddles on the mannequin and using buttons on the machine was 34 (50%), 26 (38%), and 31 (46%), respectively. Conclusions: The defibrillation skills of providers in a tertiary care children's hospital are poor. Both human and machine-related factors are associated with delay in defibrillation. Prior use of the study defibrillator is associated with a significantly shorter time-to-first shock as compared to prior use of any other defibrillator or no prior use of any defibrillator.

  12. Do clinical examination gloves provide adequate electrical insulation for safe hands-on defibrillation? I: Resistive properties of nitrile gloves.

    Science.gov (United States)

    Deakin, Charles D; Lee-Shrewsbury, Victoria; Hogg, Kitwani; Petley, Graham W

    2013-07-01

    Uninterrupted chest compressions are a key factor in determining resuscitation success. Interruptions to chest compression are often associated with defibrillation, particularly the need to stand clear from the patient during defibrillation. It has been suggested that clinical examination gloves may provide adequate electrical resistance to enable safe hands-on defibrillation in order to minimise interruptions. We therefore examined whether commonly used nitrile clinical examination gloves provide adequate resistance to current flow to enable safe hands-on defibrillation. Clinical examination gloves (Kimberly Clark KC300 Sterling nitrile) worn by members of hospital cardiac arrest teams were collected immediately following termination of resuscitation. To determine the level of protection afforded by visually intact gloves, electrical resistance across the glove was measured by applying a DC voltage across the glove and measuring subsequent resistance. Forty new unused gloves (control) were compared with 28 clinical (non-CPR) gloves and 128 clinical (CPR) gloves. One glove in each group had a visible tear and was excluded from analysis. Control gloves had a minimum resistance of 120 kΩ (median 190 kΩ) compared with 60 kΩ in clinical gloves (both CPR (median 140 kΩ) and non-CPR groups (median 160 kΩ)). Nitrile clinical examination gloves do not provide adequate electrical insulation for the rescuer to safely undertake 'hands-on' defibrillation and when exposed to the physical forces of external chest compression, even greater resistive degradation occurs. Further work is required to identify gloves suitable for safe use for 'hands-on' defibrillation. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  13. Hands-off and hands-on casting consistency of amputee below knee sockets using magnetic resonance imaging.

    Science.gov (United States)

    Safari, Mohammad Reza; Rowe, Philip; McFadyen, Angus; Buis, Arjan

    2013-01-01

    Residual limb shape capturing (Casting) consistency has a great influence on the quality of socket fit. Magnetic Resonance Imaging was used to establish a reliable reference grid for intercast and intracast shape and volume consistency of two common casting methods, Hands-off and Hands-on. Residual limbs were cast for twelve people with a unilateral below knee amputation and scanned twice for each casting concept. Subsequently, all four volume images of each amputee were semiautomatically segmented and registered to a common coordinate system using the tibia and then the shape and volume differences were calculated. The results show that both casting methods have intra cast volume consistency and there is no significant volume difference between the two methods. Inter- and intracast mean volume differences were not clinically significant based on the volume of one sock criteria. Neither the Hands-off nor the Hands-on method resulted in a consistent residual limb shape as the coefficient of variation of shape differences was high. The resultant shape of the residual limb in the Hands-off casting was variable but the differences were not clinically significant. For the Hands-on casting, shape differences were equal to the maximum acceptable limit for a poor socket fit.

  14. Ground Truth Studies - A hands-on environmental science program for students, grades K-12

    Science.gov (United States)

    Katzenberger, John; Chappell, Charles R.

    1992-01-01

    The paper discusses the background and the objectives of the Ground Truth Studies (GTSs), an activity-based teaching program which integrates local environmental studies with global change topics, utilizing remotely sensed earth imagery. Special attention is given to the five key concepts around which the GTS programs are organized, the pilot program, the initial pilot study evaluation, and the GTS Handbook. The GTS Handbook contains a primer on global change and remote sensing, aerial and satellite images, student activities, glossary, and an appendix of reference material. Also described is a K-12 teacher training model. International participation in the program is to be initiated during the 1992-1993 school year.

  15. Android Based Mobile Apps for Information Security Hands-On Education

    Science.gov (United States)

    Trabelsi, Zouheir; Al Matrooshi, Mohammed; Al Bairaq, Saeed; Ibrahim, Walid; Masud, Mohammad M.

    2017-01-01

    As mobile devices grow increasingly in popularity within the student community, novel educational activities and tools, as well as learning approaches can be developed to get benefit from this prevalence of mobile devices (e.g. mobility and closeness to students' daily lives). Particularly, information security education should reflect the current…

  16. Ocean Acidification: Hands-On Experiments to Explore the Causes and Consequences

    Science.gov (United States)

    Bruno, Barbara C.; Tice, Kimberly A.; Puniwai, Noelani; Achilles, Kate

    2011-01-01

    Ocean acidification is one of the most serious environmental issues facing the planet (e.g., Doney 2006; Guinotte and Fabry 2009). It is caused by excess carbon dioxide (CO[subscript 2]) in the atmosphere. Human activities such as burning fossil fuels put CO[subscript 2] and other heat-trapping gases into the atmosphere, which causes the Earth's…

  17. How to Read Scientific Research Articles: A Hands-On Classroom Exercise

    Science.gov (United States)

    Bogucka, Roxanne; Wood, Emily

    2009-01-01

    Undergraduate students are generally unfamiliar with scientific literature. Further, students experience frustration when they read research articles the way they read textbooks, from beginning to end. Using a team-based active learning exercise, an instruction librarian and colleagues at University of Texas at Austin introduce nutritional…

  18. small-scale chemistry for a hands-on approach to chemistry practical

    African Journals Online (AJOL)

    IICBA01

    Department of Chemistry, Norwegian University of Science and Technology, ..... kits were acquired from South Africa (Mylab project, Northwest University). .... solve/handle the lab problems, and, even less, to explore innovative ways ..... lessons at their own pace, they were good at managing and saving time for activities like.

  19. Uncovering Procedural Knowledge in Craft, Design, and Technology Education: A Case of Hands-On Activities in Electronics

    Science.gov (United States)

    Pirttimaa, Matti; Husu, Jukka; Metsärinne, Mika

    2017-01-01

    Different knowledge types have their own specific features and tasks in the learning process. Procedural knowledge is used in craft and technology education when students solve problems individually and share their working knowledge with others. This study presents a detailed analysis of a one student's learning process in technology education and…

  20. Hands-On Approach to Structure Activity Relationships: The Synthesis, Testing, and Hansch Analysis of a Series of Acetylcholineesterase Inhibitors

    Science.gov (United States)

    Locock, Katherine; Tran, Hue; Codd, Rachel; Allan, Robin

    2015-01-01

    This series of three practical sessions centers on drugs that inhibit the enzyme acetylcholineesterase. This enzyme is responsible for the inactivation of acetylcholine and has been the target of drugs to treat glaucoma and Alzheimer's disease and for a number of insecticides and warfare agents. These sessions relate to a series of carbamate…

  1. How-to-Do-It: Hands-on Activity for Mitosis, Meiosis and the Fundamentals of Heredity.

    Science.gov (United States)

    Taylor, Mark F.

    1988-01-01

    Described is an exercise which uses inexpensive and easy-to-make materials to demonstrate the basic fundamentals of heredity. Discusses two approaches using a hypothetical insert to demonstrate inheritance, mitosis, meiosis, and genotypic and phenotypic frequencies. (CW)

  2. Engaging Students in Early Exploration of Nanoscience Topics Using Hands-On Activities and Scanning Tunneling Microscopy

    Science.gov (United States)

    Furlan, Ping Y.

    2009-01-01

    This manuscript reports on efforts to introduce beginning college students to the modern nanoscience field. These include: implementing selected experiments into sequencing core first-year and second-year chemistry laboratory courses; providing students with a first research experience; and engaging them in service learning and outreach programs…

  3. Instant Math Storymats with Hands-on Activities for Building Essential Primary Math Skills, Grades K-2.

    Science.gov (United States)

    Spann, Mary Beth

    This book contains 18 reproducible Math Storymats which can be a refreshing addition to any early elementary math program. Each storymat is accompanied by two separate read-aloud story selections that guide children in using plastic disk-shaped markers to interact with the mats in specific and open-ended ways. Together the mats and the…

  4. From Tootsie Rolls to Composites: Assessing a Spectrum of Active Learning Activities in Engineering Mechanics

    Science.gov (United States)

    2009-05-01

    The introduction of active learning exercises into a traditional lecture has been shown to improve students’ learning. Hands-on learning...opportunities in labs and projects provide are additional tools in the active learning toolbox. This paper presents a series of innovative hands-on active ... learning activities for mechanics of materials topics. These activities are based on a Methodology for Developing Hands-on Active Learning Activities, a

  5. Minds on Fire

    Science.gov (United States)

    Cushman, Kathleen

    2014-01-01

    What happens when teachers, neuroscientists, and students combine their perspectives in a three-way dialogue about why selected classroom lessons were highly motivating? They discover that the factors that teachers and students believe important to student motivation are solidly aligned with insights from neuroscience. Author Kathleen Cushman…

  6. Challenges of astronomy hands-on experiments for the sky and laboratory

    CERN Document Server

    Schlosser, W; Milone, E F

    1991-01-01

    Challenges of Astronomy in a unique collection of thirty astronomy experiments ranging from ancient astronomy to cosmology. Each of the experiments contains one or more challenges for the reader. The progression is from the Earth outward through the solar system to the stellar and galactic realm. Topics include the shape of the sky, Stonehenge as a stoneage abacus, determination of the size of the Earth, the distance of the Moon and planets, Kepler's laws, planetary mass and density, the temperatures and atmospheres of planets, the speed of light, the distances of stars, the nature of the quiet and active Sun, photometry and spectroscopy, stars clusters and variable stars, fundamental properties of stars, and Olber's paradox. Challenges of Astronomy is a translation and extensive revision of a German-language resource book for secondary school teachers of science. Physical science teachers will find this edition too a rich resource of experiments to their own milieus, but it is suitable for many other English...

  7. Cultural Earth Science in Hawai`i: Hands-on Place-Based Investigations that Merge Traditional Knowledge with Earth Science Inquiry

    Science.gov (United States)

    Moxey, L.; Dias, R. K.; Legaspi, E.

    2011-12-01

    During the summer of 2011, the Mālama Ke Ahupua`a (to care of our watershed) GEARUP summer program provided 25 under-served and under-represented minority public high school students (Hawaiian, part-Hawaiian, Filipino, Pacific Islanders) from Farrington High School (Kalihi, Honolulu) with a hands-on place-based multidiscipline course located within Manoa Valley (Ahupua`a O Kona) with the objective of engaging participants in scientific environmental investigations while exploring Hawaii's linkages between traditional knowledge, culture and science. The 4-week field program enabled students to collect samples along the perennial Manoa Stream and conduct water quality assessments throughout the Manoa watershed. Students collected science quality data from eight different sampling stations by means of field- and laboratory-based quantitative water quality testing equipment and GPS/GIS technology. While earning Hawaii DOE academic credits, students were able to document changes along the stream as related to pollution and urbanization. While conducting the various scientific investigations, students also participated in cultural fieldtrips and activities that highlighted the linkages between historical sustainable watershed uses by native Hawaiian communities, and their connections with natural earth processes. Additionally, students also participated in environmental service-learning projects that highlight the Hawaiian values of laulima (teamwork), mālama (to care for), and imi `ike (to seek knowledge). By contextualizing and merging hands-on place-based earth science inquiry with native Hawaiian traditional knowledge, students experienced the natural-cultural significance of their ahupua`a (watershed). This highlighted the advantages for promoting environmental literacy and geoscience education to under-served and under-represented minority populations in Hawaii from a rich native Hawaiian cultural framework.

  8. A comparison of hands-on inquiry instruction to lectureinstruction with special needs high school biology students

    Science.gov (United States)

    Jensen-Ruopp, Helga Spitko

    A comparison of hands-on inquiry instruction with lecture instruction was presented to 134 Patterns and Process Biology students. Students participated in seven biology lessons that were selected from Biology Survey of Living Things (1992). A pre and post paper and pencil assessment was used as the data collecting instrument. The treatment group was taught using hands-on inquiry strategies while the non-treatment group was taught in the lecture method of instruction. The team teaching model was used as the mode of presentation to the treatment group and the non-treatment group. Achievement levels using specific criterion; novice (0% to 50%), developing proficiency (51% to 69%), accomplished (70% to 84) and exceptional or mastery level (85% to 100%) were used as a guideline to tabulate the results of the pre and post assessment. Rubric tabulation was done to interpret the testing results. The raw data was plotted using percentage change in test score totals versus reading level score by gender as well as percentage change in test score totals versus auditory vocabulary score by gender. Box Whisker plot comparative descriptive of individual pre and post test scores for the treatment and non-treatment group was performed. Analysis of covariance (ANCOVA) using MINITAB Statistical Software version 14.11 was run on data of the seven lessons, as well as on gender (male results individual and combined, and female results individual and combined) results. Normal Probability Plots for total scores as well as individual test scores were performed. The results suggest that hands-on inquiry based instruction when presented to special needs students including; at-risk; English as a second language limited, English proficiency and special education inclusive students' learning may enhance individual student achievement.

  9. Exploring the Effects of Specific, Hands-On Interventions, on Environmental Science Topics in Teacher Education Programs

    Science.gov (United States)

    Bullock, S. M.; Hayhoe, D.

    2012-12-01

    With increased concern over the environment, all Ontario students now study soils, energy conservation, water systems, and climate change & the greenhouse effect in Grades 3, 5, 7, 8 and 10. Unfortunately, many prospective teachers at the elementary and intermediate levels come to teacher education programs with little or no formal science education beyond their own experiences as students in the K-12 system. We devised a series of concept tests (some binary choice, some multiple choice) designed to assess teacher candidates' conceptual understandings of soils, energy, water systems, and climate change and the greenhouse effect - the very content they are expected to teach their future students in the school system. We administered a pre-test to our students at two institutions to establish a baseline of their understanding. Then, we specifically devoted class time to exploring each of these themes in our science curriculum methods courses in order using research-based principles of teaching devoted to promoting conceptual change through the use of hands-on, inquiry approaches in science. After a few months had passed, we again administered the same tests to teacher candidates to measure candidates' conceptual gain. Some teacher candidates also participated in follow-up focus group interviews so that they could have the opportunity to articulate their understandings of concepts in environmental science using their own words. In this poster we will report on data collected for this project over the past two academic years. We have reached two broad conclusions. First, teacher candidates know a considerable amount about the four environmental topics that were selected, despite the fact that most participants in the research did not have post-secondary training in science. For example, participants tended to know that planting different crops on the soil in different years helps to maintain fertile soils and that warmer oceans will cause an increase in the severity of

  10. Communicating Climate Science to Kids and Adults Through Citizen Science, Hands-On Demonstrations, and a Personal Approach

    Science.gov (United States)

    Cherry, L.; Braasch, G.

    2008-12-01

    There is a demonstrated need to increase the amount of formal and non-formal science education and to raise the level of climate literacy for children and adults. Scientists and technical leaders are more and more being called on to speak in non-academic settings ranging from grade schools to assemblies and seminars for the general public. This abstract describes some effective ways to teach and talk about climate change science in a way that engenders hope and empowerment while explaining scientific facts and research methods to non-scientists. Citizen participation in Science People's interest and learning increases when offered chances to do what scientists do. Relating science to their daily lives and showing the adventure of science can greatly increase communication. Citizen participation in science works because data collection stimulates experiential and cognitive ways of learning. Learn what programs for citizen science are available in your area. For instance, GLOBE and Budburst tie into the research of Smithsonian scientists who determined that the cherry blossoms and 40 other species of plants were blooming earlier due to climate warming. Hands-on Outdoor Activities Information enters the human brain through many different neural pathways and the more avenues that information comes in on, the more likely people are to retain that knowledge for their lifetimes. For instance, kids knowledge of how ice cores tell us about the earth's ancient history will be reinforced through making ice cores in the classroom. Gary Braasch's photographs from the children's book How We Know What We Know About Our Changing Climate: Scientists and Kids Explore Global Warming and from his adult book Earth Under Fire: How Global Warming is Changing the World will illustrate the presentation. . Making the Message Personal to the Audience. Reaching people through things they care about, their family lives, work or school and telling personal stories helps reach people. The videos

  11. Vicarious learning during simulations: is it more effective than hands-on training?

    Science.gov (United States)

    Stegmann, Karsten; Pilz, Florian; Siebeck, Matthias; Fischer, Frank

    2012-10-01

    Doctor-patient communication skills are often fostered by using simulations with standardised patients (SPs). The efficiency of such experiences is greater if student observers learn at least as much from the simulation as do students who actually interact with the patient. This study aimed to investigate whether the type of simulation-based learning (learning by doing versus vicarious learning) and the order in which these activities are carried out (learning by doing → vicarious learning versus vicarious learning → learning by doing) have any effect on the acquisition of knowledge on effective doctor-patient communication strategies. In addition, we wished to examine the extent to which an observation script and a feedback formulation script affect knowledge acquisition in this domain. The sample consisted of 200 undergraduate medical students (126 female, 74 male). They participated in two separate simulation sessions, each of which was 30 minutes long and was followed by a collaborative peer feedback phase. Half of the students first performed (learning by doing) and then observed (vicarious learning) the simulation, and the other half participated in the reverse order. Knowledge of doctor-patient communication was measured before, between and after the simulations. Vicarious learning led to greater knowledge of doctor-patient communication scores than learning by doing. The order in which vicarious learning was experienced had no influence. The inclusion of an observation script also enabled significantly greater learning in students to whom this script was given compared with students who were not supported in this way, but the presence of a feedback script had no effect. Students appear to learn at least as much, if not more, about doctor-patient communication by observing their peers interact with SPs as they do from interacting with SPs themselves. Instructional support for observing simulations in the form of observation scripts facilitates both

  12. 'Science in action': The politics of hands-on display at the New York Museum of Science and Industry.

    Science.gov (United States)

    Sastre-Juan, Jaume

    2018-06-01

    This article analyzes the changing politics of hands-on display at the New York Museum of Science and Industry by following its urban deambulation within Midtown Manhattan, which went hand in hand with sharp shifts in promoters, narrative, and exhibition techniques. The museum was inaugurated in 1927 as the Museum of the Peaceful Arts on the 7th and 8th floors of the Scientific American Building. It changed its name in 1930 to the New York Museum of Science and Industry while on the 4th floor of the Daily News Building, and it was close to being renamed the Science Center when it finally moved in 1936 to the ground floor of the Rockefeller Center. The analysis of how the political agenda of the different promoters of the New York Museum of Science and Industry was spatially and performatively inscribed in each of its sites suggests that the 1930s boom of visitor-operated exhibits had nothing to do with an Exploratorium-like rhetoric of democratic empowerment. The social paternalistic ideology of the vocational education movement, the ideas on innovation of the early sociology of invention, and the corporate behavioral approach to mass communications are more suitable contexts in which to understand the changing politics of hands-on display in interwar American museums of science and industry.

  13. The OpenPicoAmp: an open-source planar lipid bilayer amplifier for hands-on learning of neuroscience.

    Science.gov (United States)

    Shlyonsky, Vadim; Dupuis, Freddy; Gall, David

    2014-01-01

    Understanding the electrical biophysical properties of the cell membrane can be difficult for neuroscience students as it relies solely on lectures of theoretical models without practical hands on experiments. To address this issue, we developed an open-source lipid bilayer amplifier, the OpenPicoAmp, which is appropriate for use in introductory courses in biophysics or neurosciences at the undergraduate level, dealing with the electrical properties of the cell membrane. The amplifier is designed using the common lithographic printed circuit board fabrication process and off-the-shelf electronic components. In addition, we propose a specific design for experimental chambers allowing the insertion of a commercially available polytetrafluoroethylene film. We provide a complete documentation allowing to build the amplifier and the experimental chamber. The students hand-out giving step-by step instructions to perform a recording is also included. Our experimental setup can be used in basic experiments in which students monitor the bilayer formation by capacitance measurement and record unitary currents produced by ionic channels like gramicidin A dimers. Used in combination with a low-cost data acquisition board this system provides a complete solution for hands-on lessons, therefore improving the effectiveness in teaching basic neurosciences or biophysics.

  14. MO-DE-BRA-04: Hands-On Fluoroscopy Safety Training with Real-Time Patient and Staff Dosimetry

    International Nuclear Information System (INIS)

    Vanderhoek, M; Bevins, N

    2016-01-01

    Purpose: Fluoroscopically guided interventions (FGI) are routinely performed across many different hospital departments. However, many involved staff members have minimal training regarding safe and optimal use of fluoroscopy systems. We developed and taught a hands-on fluoroscopy safety class incorporating real-time patient and staff dosimetry in order to promote safer and more optimal use of fluoroscopy during FGI. Methods: The hands-on fluoroscopy safety class is taught in an FGI suite, unique to each department. A patient equivalent phantom is set on the patient table with an ion chamber positioned at the x-ray beam entrance to the phantom. This provides a surrogate measure of patient entrance dose. Multiple solid state dosimeters (RaySafe i2 dosimetry systemTM) are deployed at different distances from the phantom (0.1, 1, 3 meters), which provide surrogate measures of staff dose. Instructors direct participating clinical staff to operate the fluoroscopy system as they view live fluoroscopic images, patient entrance dose, and staff doses in real-time. During class, instructors work with clinical staff to investigate how patient entrance dose, staff doses, and image quality are affected by different parameters, including pulse rate, magnification, collimation, beam angulation, imaging mode, system geometry, distance, and shielding. Results: Real-time dose visualization enables clinical staff to directly see and learn how to optimize their use of their own fluoroscopy system to minimize patient and staff dose, yet maintain sufficient image quality for FGI. As a direct result of the class, multiple hospital departments have implemented changes to their imaging protocols, including reduction of the default fluoroscopy pulse rate and increased use of collimation and lower dose fluoroscopy modes. Conclusion: Hands-on fluoroscopy safety training substantially benefits from real-time patient and staff dosimetry incorporated into the class. Real-time dose display helps

  15. MO-DE-BRA-04: Hands-On Fluoroscopy Safety Training with Real-Time Patient and Staff Dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Vanderhoek, M; Bevins, N [Henry Ford Health System, Detroit, MI (United States)

    2016-06-15

    Purpose: Fluoroscopically guided interventions (FGI) are routinely performed across many different hospital departments. However, many involved staff members have minimal training regarding safe and optimal use of fluoroscopy systems. We developed and taught a hands-on fluoroscopy safety class incorporating real-time patient and staff dosimetry in order to promote safer and more optimal use of fluoroscopy during FGI. Methods: The hands-on fluoroscopy safety class is taught in an FGI suite, unique to each department. A patient equivalent phantom is set on the patient table with an ion chamber positioned at the x-ray beam entrance to the phantom. This provides a surrogate measure of patient entrance dose. Multiple solid state dosimeters (RaySafe i2 dosimetry systemTM) are deployed at different distances from the phantom (0.1, 1, 3 meters), which provide surrogate measures of staff dose. Instructors direct participating clinical staff to operate the fluoroscopy system as they view live fluoroscopic images, patient entrance dose, and staff doses in real-time. During class, instructors work with clinical staff to investigate how patient entrance dose, staff doses, and image quality are affected by different parameters, including pulse rate, magnification, collimation, beam angulation, imaging mode, system geometry, distance, and shielding. Results: Real-time dose visualization enables clinical staff to directly see and learn how to optimize their use of their own fluoroscopy system to minimize patient and staff dose, yet maintain sufficient image quality for FGI. As a direct result of the class, multiple hospital departments have implemented changes to their imaging protocols, including reduction of the default fluoroscopy pulse rate and increased use of collimation and lower dose fluoroscopy modes. Conclusion: Hands-on fluoroscopy safety training substantially benefits from real-time patient and staff dosimetry incorporated into the class. Real-time dose display helps

  16. Hands-On Hydroponics

    Science.gov (United States)

    Carver, Jeffrey; Wasserman, Bradley

    2012-01-01

    Hydroponics is a process in which plants are grown using nutrient-rich water instead of soil. Because this process maximizes the use of water and nutrients--providing only what the plant uses in controlled and easily maintained systems--it is a viable alternative to traditional farming methods. The amount of control in these systems also ensures…

  17. Hands on exotics

    Science.gov (United States)

    Sandy. Bivens

    1998-01-01

    To lead, teach, rear, bring up, instruct, train, show, inform, guide, direct, inspire, and foster expansion of knowledge-that is education. Environmental education has been defined as the interdisciplinary process of developing a citizenry that is knowledgeable about the total environment, including both its natural and built aspects, that has the capacity and the...

  18. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Version 5.0: Data loading manual. Volume 10

    International Nuclear Information System (INIS)

    VanHorn, R.L.; Wolfram, L.M.; Fowler, R.D.; Beck, S.T.; Smith, C.L.

    1995-04-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) suite of programs can be used to organize and standardize in an electronic format information from probabilistic risk assessments or individual plant examinations. The Models and Results Database (MAR-D) program of the SAPHIRE suite serves as the repository for probabilistic risk assessment and individual plant examination data and information. This report demonstrates by examples the common electronic and manual methods used to load these types of data. It is not a stand alone document but references documents that contribute information relative to the data loading process. This document provides a more detailed discussion and instructions for using SAPHIRE 5.0 only when enough information on a specific topic is not provided by another available source

  19. Probabilistic safety assessment of Tehran Research Reactor using systems analysis programs for hands-on integrated reliability evaluations

    International Nuclear Information System (INIS)

    Hosseini, M.H.; Nematollahi, M.R.; Sepanloo, K.

    2004-01-01

    Probabilistic safety assessment application is found to be a practical tool for research reactor safety due to intense involvement of human interactions in an experimental facility. In this document the application of the probabilistic safety assessment to the Tehran Research Reactor is presented. The level 1 practicabilities safety assessment application involved: Familiarization with the plant, selection of accident initiators, mitigating functions and system definitions, event tree constructions and quantifications, fault tree constructions and quantification, human reliability, component failure data base development and dependent failure analysis. Each of the steps of the analysis given above is discussed with highlights from the selected results. Quantification of the constructed models is done using systems analysis programs for hands-on integrated reliability evaluations software

  20. Hands on, mobiles on The use of a digital narrative as a scaffolding remedy in a classical science centre

    Directory of Open Access Journals (Sweden)

    Anne Kahr-Højland

    2010-12-01

    Full Text Available This article examines an educational design experiment which aimed to support young people’s involvement and reflection in the exhibition at a Danish science centre. The experiment consisted in the examination of the design and implementation of a mobile phone facilitated narrative, which was planned as a so-called scaffolding remedy in the hands-on based exhibition. The digital narrative, called EGO-TRAP, was developed using Design-Based Research as the overall methodological framework. The study of students’ interactions in the exhibition suggests, among other things, that because of its quality as a digital narrative, EGO-TRAP scaffolds pleasurable engagement and counteracts the tendency of "random button pressing" that often occurs in classical science centre exhibitions. In this connection, the mobile phone plays an essential role due to the fact that it, as the favoured media by the young students, offers an experience which they describe as both personal and flexible.

  1. Immersive, hands-on, team-based geophysical education at the University of Texas Marine Geology and Geophysics Field Course

    Science.gov (United States)

    Saustrup, S.; Gulick, S. P.; Goff, J. A.; Davis, M. B.; Duncan, D.; Reece, R.

    2013-12-01

    The University of Texas Institute for Geophysics (UTIG), part of the Jackson School of Geosciences, annually offers a unique and intensive three-week marine geology and geophysics field course during the spring/summer semester intersession. Now entering its seventh year, the course transitions students from a classroom environment through real-world, hands-on field acquisition, on to team-oriented data interpretation, culminating in a professional presentation before academic and industry employer representatives. The course is available to graduate students and select upper-division undergraduates, preparing them for direct entry into the geoscience workforce or for further academic study. Geophysical techniques used include high-resolution multichannel seismic reflection, CHIRP sub-bottom profiling, multibeam bathymetry, sidescan sonar, sediment coring, grab sampling, data processing, and laboratory analysis of sediments. Industry-standard equipment, methods, software packages, and visualization techniques are used throughout the course, putting students ahead of many of their peers in this respect. The course begins with a 3-day classroom introduction to the field area geology, geophysical methods, and computing resources used. The class then travels to the Gulf Coast for a week of hands-on field and lab work aboard two research vessels: UTIG's 22-foot, aluminum hulled Lake Itasca; and NOAA's 82-foot high-speed catamaran R/V Manta. The smaller vessel handles primarily shallow, inshore targets using multibeam bathymetry, sidescan sonar, and grab sampling. The larger vessel is used both inshore and offshore for multichannel seismic, CHIRP profiling, multibeam bathymetry, gravity coring, and vibracoring. Field areas to date have included Galveston and Port Aransas, Texas, and Grand Isle, Louisiana, with further work in Grand Isle scheduled for 2014. In the field, students work in teams of three, participating in survey design, instrument set-up, field deployment

  2. Hands-on approach to teaching Earth system sciences using a information-computational web-GIS portal "Climate"

    Science.gov (United States)

    Gordova, Yulia; Gorbatenko, Valentina; Martynova, Yulia; Shulgina, Tamara

    2014-05-01

    A problem of making education relevant to the workplace tasks is a key problem of higher education because old-school training programs are not keeping pace with the rapidly changing situation in the professional field of environmental sciences. A joint group of specialists from Tomsk State University and Siberian center for Environmental research and Training/IMCES SB RAS developed several new courses for students of "Climatology" and "Meteorology" specialties, which comprises theoretical knowledge from up-to-date environmental sciences with practical tasks. To organize the educational process we use an open-source course management system Moodle (www.moodle.org). It gave us an opportunity to combine text and multimedia in a theoretical part of educational courses. The hands-on approach is realized through development of innovative trainings which are performed within the information-computational platform "Climate" (http://climate.scert.ru/) using web GIS tools. These trainings contain practical tasks on climate modeling and climate changes assessment and analysis and should be performed using typical tools which are usually used by scientists performing such kind of research. Thus, students are engaged in n the use of modern tools of the geophysical data analysis and it cultivates dynamic of their professional learning. The hands-on approach can help us to fill in this gap because it is the only approach that offers experience, increases students involvement, advance the use of modern information and communication tools. The courses are implemented at Tomsk State University and help forming modern curriculum in Earth system science area. This work is partially supported by SB RAS project VIII.80.2.1, RFBR grants numbers 13-05-12034 and 14-05-00502.

  3. Prospective randomized study of contrast reaction management curricula: Computer-based interactive simulation versus high-fidelity hands-on simulation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Carolyn L., E-mail: wangcl@uw.edu [Department of Radiology, University of Washington, Box 357115, 1959 NE Pacific Street, Seattle, WA 98195-7115 (United States); Schopp, Jennifer G.; Kani, Kimia [Department of Radiology, University of Washington, Box 357115, 1959 NE Pacific Street, Seattle, WA 98195-7115 (United States); Petscavage-Thomas, Jonelle M. [Penn State Hershey Medical Center, Department of Radiology, 500 University Drive, Hershey, PA 17033 (United States); Zaidi, Sadaf; Hippe, Dan S.; Paladin, Angelisa M.; Bush, William H. [Department of Radiology, University of Washington, Box 357115, 1959 NE Pacific Street, Seattle, WA 98195-7115 (United States)

    2013-12-01

    Purpose: We developed a computer-based interactive simulation program for teaching contrast reaction management to radiology trainees and compared its effectiveness to high-fidelity hands-on simulation training. Materials and methods: IRB approved HIPAA compliant prospective study of 44 radiology residents, fellows and faculty who were randomized into either the high-fidelity hands-on simulation group or computer-based simulation group. All participants took separate written tests prior to and immediately after their intervention. Four months later participants took a delayed written test and a hands-on high-fidelity severe contrast reaction scenario performance test graded on predefined critical actions. Results: There was no statistically significant difference between the computer and hands-on groups’ written pretest, immediate post-test, or delayed post-test scores (p > 0.6 for all). Both groups’ scores improved immediately following the intervention (p < 0.001). The delayed test scores 4 months later were still significantly higher than the pre-test scores (p ≤ 0.02). The computer group's performance was similar to the hands-on group on the severe contrast reaction simulation scenario test (p = 0.7). There were also no significant differences between the computer and hands-on groups in performance on the individual core competencies of contrast reaction management during the contrast reaction scenario. Conclusion: It is feasible to develop a computer-based interactive simulation program to teach contrast reaction management. Trainees that underwent computer-based simulation training scored similarly on written tests and on a hands-on high-fidelity severe contrast reaction scenario performance test as those trained with hands-on high-fidelity simulation.

  4. Prospective randomized study of contrast reaction management curricula: Computer-based interactive simulation versus high-fidelity hands-on simulation

    International Nuclear Information System (INIS)

    Wang, Carolyn L.; Schopp, Jennifer G.; Kani, Kimia; Petscavage-Thomas, Jonelle M.; Zaidi, Sadaf; Hippe, Dan S.; Paladin, Angelisa M.; Bush, William H.

    2013-01-01

    Purpose: We developed a computer-based interactive simulation program for teaching contrast reaction management to radiology trainees and compared its effectiveness to high-fidelity hands-on simulation training. Materials and methods: IRB approved HIPAA compliant prospective study of 44 radiology residents, fellows and faculty who were randomized into either the high-fidelity hands-on simulation group or computer-based simulation group. All participants took separate written tests prior to and immediately after their intervention. Four months later participants took a delayed written test and a hands-on high-fidelity severe contrast reaction scenario performance test graded on predefined critical actions. Results: There was no statistically significant difference between the computer and hands-on groups’ written pretest, immediate post-test, or delayed post-test scores (p > 0.6 for all). Both groups’ scores improved immediately following the intervention (p < 0.001). The delayed test scores 4 months later were still significantly higher than the pre-test scores (p ≤ 0.02). The computer group's performance was similar to the hands-on group on the severe contrast reaction simulation scenario test (p = 0.7). There were also no significant differences between the computer and hands-on groups in performance on the individual core competencies of contrast reaction management during the contrast reaction scenario. Conclusion: It is feasible to develop a computer-based interactive simulation program to teach contrast reaction management. Trainees that underwent computer-based simulation training scored similarly on written tests and on a hands-on high-fidelity severe contrast reaction scenario performance test as those trained with hands-on high-fidelity simulation

  5. Action Research Using Entomological Research to Promote Hands-On Science Inquiry in a High-Poverty, Midwest Urban High School

    Science.gov (United States)

    Stockmann, Dustin

    The purpose of this mixed-methods action research study was to examine to what extent entomological research can promote students' hands-on learning in a high-poverty, urban, secondary setting. In reviewing the literature, the researcher was not able to find a specific study that investigated how entomological research could promote the hands-on learning of students. The researcher did find evidence that research on learning in a secondary setting was important to student growth. It should also be noted that support was established for the implementation of hands-on science inquiry in the classroom setting. The study's purpose was to aid educators in their instruction by combining research-based strategies and hands-on science inquiry. The surveys asked 30 students to rate their understanding of three basic ideas. These core ideas were entomological research, hands-on science inquiry, and urban studies. These core ideas provided the foundation for the study. The questionnaires were based on follow-up ideas from the surveys. Two interview sessions were used to facilitate this one-on-one focus. Because the study included only 30 student participants, its findings may not be totally replicable. Further study investigating the links between entomological research and hands-on science learning in an urban environment is needed.

  6. How Do Learning Outcomes, Assessments and Student Engagement in a Fully Online Geoscience Laboratory Compare to Those Of The Original Hands-on Exercise?

    Science.gov (United States)

    Jones, F. M.

    2015-12-01

    In a third year geoscience elective for BSc majors, we adapted several active f2f learning strategies for an equivalent fully online version of the course. In particular, we converted a hands-on laboratory including analysis and interpretation of hand-specimens, sketching results and peer-to-peer discussion of scientific implications. This study compares learning outcomes in both formats and describes resources that make engaging, effective and efficient learning experiences for large classes in an asynchronous online environment. Our two hypotheses are: 1) a hands-on geology lab exercise can be converted for efficient fully online use without sacrificing feedback and assessment opportunities; 2) students find either the f2f or DE versions equally effective and enjoyable as learning experiences. Key components are an authentic context, interactive resources including sketching, strategies that enable efficient assessment and feedback on solo and group work, and asynchronous yet productive interaction with peers. Students in the f2f class handle real rock and fossil specimens, work with peers in the lab and classroom, and deliver most results including annotated figures on paper. DE students complete identical tasks using interactive high resolution figures and videos of specimens. Solo work is first delivered for automated assessment and feedback, then students engage asynchronously in small groups to improve results and discuss implications. Chronostratigraphy and other interpretations are sketched on prepared template images using a simple open-source sketching app that ensures equal access and consistent results that are efficient to assess by peers and instructors. Learning outcomes based on subsequent quizzes, sketches, and lab results (paper for f2f students and automated data entry for DE students), show that f2f and online students demonstrate knowledge and scientific interpretations of comparable quality. Effective engagement and group work are

  7. Introducing Hands-on, Experiential Learning Experiences in an Urban Environmental Science Program at a Minority Serving Institution

    Science.gov (United States)

    Duzgoren-Aydin, N. S.; Freile, D.

    2013-12-01

    STEM education at New Jersey City University increasingly focuses on experiential, student-centered learning. The Department of Geoscience/Geography plays a significant role in developing and implementing a new Urban Environmental Science Program. The program aims at graduating highly skilled, demographically diverse students (14 % African-American and 18% Hispanic) to be employed in high-growth Earth and Environmental Science career paths, both at a technical (e.g. B.S.) as well as an educational (K-12 grade) (e.g. B.A) level. The core program, including the Earth and Environmental Science curricula is guided by partners (e.g. USDA-NRCS). The program is highly interdisciplinary and 'hands-on', focusing upon the high-tech practical skills and knowledge demanded of science professionals in the 21st century. The focus of the curriculum is on improving environmental quality in northern NJ, centering upon our urban community in Jersey City and Hudson County. Our Department is moving towards a more earth system science approach to learning. Most of our courses (e.g., Earth Surface Processes, Sedimentology/Stratigraphy, Earth Materials, Essential Methods, Historical Geology) have hands-on laboratory and/or field components. Although some of our other courses do not have formal laboratory components, research modules of many such courses (Geochemistry, Urban Environmental Issues and Policy and Environmental Geology) involve strong field or laboratory studies. The department has a wide range of analytical and laboratory capacities including a portable XRF, bench-top XRD and ICP-MS. In spring 2013, Dr. Duzgoren-Aydin was awarded $277K in Higher Education Equipment Leasing Fund monies from the University in order to establish an Environmental Teaching and Research Laboratory. The addition of these funds will make it possible for the department to increase its instrumentation capacity by adding a mercury analyzer, Ion Chromatography and C-N-S analyzer, as well as updating

  8. Clinically Prepared Veterinary Students: Enhancing Veterinary Student Hands-on Experiences and Supporting Hospital Caseload Using Shelter Medicine Program

    Directory of Open Access Journals (Sweden)

    Jacob M. Shivley

    2018-05-01

    Full Text Available Referral-level medicine is important in the veterinary curriculum, however veterinary students also need a solid base knowledge of clinically relevant, routine surgical and diagnostic skills to be clinically prepared after graduation. Exposure to a referral-only, or primarily referral caseload, does not always provide veterinary students with the routine hands-on experiences and competencies expected by the American Veterinary Medical Association Council on Education, the Royal College of Veterinary Surgeons, the Australian Veterinary Boards Council, or prospective employers. The aim of this descriptive study was to assess how a shelter medicine program can fill the companion animal caseload gap and create the necessary hands-on experiences considered essential in the veterinary curriculum. Pedagogical frameworks, course curriculum and design, student experiences, and student assessments were described for three core curricular areas (surgery, medical days, population medicine of the Shelter Medicine Program at Mississippi State University. The shelter surgery experience provided a high-quality, high-volume spay/neuter environment where fourth-year students averaged 65 sterilization surgeries in two weeks and demonstrated a quantifiable decrease in surgical time. The shelter surgery experience added on average 9,000 small animal cases per year to the overall hospital caseload. Shelter medical days, where students provide veterinary care during on-site shelter visits, created opportunities for third-year students to directly interact with shelter animals by performing physical examinations and diagnostic testing, and to gain experience in developing treatment protocols and recommendations for commonly encountered problems. The shelter medical days experience averaged over 700 small animal cases per year and over 1,500 diagnostic procedures. Finally, students participated in 15 onsite shelter consultations where they obtained a working knowledge

  9. Clinically Prepared Veterinary Students: Enhancing Veterinary Student Hands-on Experiences and Supporting Hospital Caseload Using Shelter Medicine Program.

    Science.gov (United States)

    Shivley, Jacob M; Brookshire, Wilson C; Bushby, Philip A; Woodruff, Kimberly A

    2018-01-01

    Referral-level medicine is important in the veterinary curriculum, however veterinary students also need a solid base knowledge of clinically relevant, routine surgical and diagnostic skills to be clinically prepared after graduation. Exposure to a referral-only, or primarily referral caseload, does not always provide veterinary students with the routine hands-on experiences and competencies expected by the American Veterinary Medical Association Council on Education, the Royal College of Veterinary Surgeons, the Australian Veterinary Boards Council, or prospective employers. The aim of this descriptive study was to assess how a shelter medicine program can fill the companion animal caseload gap and create the necessary hands-on experiences considered essential in the veterinary curriculum. Pedagogical frameworks, course curriculum and design, student experiences, and student assessments were described for three core curricular areas (surgery, medical days, population medicine) of the Shelter Medicine Program at Mississippi State University. The shelter surgery experience provided a high-quality, high-volume spay/neuter environment where fourth-year students averaged 65 sterilization surgeries in two weeks and demonstrated a quantifiable decrease in surgical time. The shelter surgery experience added on average 9,000 small animal cases per year to the overall hospital caseload. Shelter medical days, where students provide veterinary care during on-site shelter visits, created opportunities for third-year students to directly interact with shelter animals by performing physical examinations and diagnostic testing, and to gain experience in developing treatment protocols and recommendations for commonly encountered problems. The shelter medical days experience averaged over 700 small animal cases per year and over 1,500 diagnostic procedures. Finally, students participated in 15 onsite shelter consultations where they obtained a working knowledge of biosecurity at a

  10. MO-E-18C-02: Hands-On Monte Carlo Project Assignment as a Method to Teach Radiation Physics

    International Nuclear Information System (INIS)

    Pater, P; Vallieres, M; Seuntjens, J

    2014-01-01

    Purpose: To present a hands-on project on Monte Carlo methods (MC) recently added to the curriculum and to discuss the students' appreciation. Methods: Since 2012, a 1.5 hour lecture dedicated to MC fundamentals follows the detailed presentation of photon and electron interactions. Students also program all sampling steps (interaction length and type, scattering angle, energy deposit) of a MC photon transport code. A handout structured in a step-by-step fashion guides student in conducting consistency checks. For extra points, students can code a fully working MC simulation, that simulates a dose distribution for 50 keV photons. A kerma approximation to dose deposition is assumed. A survey was conducted to which 10 out of the 14 attending students responded. It compared MC knowledge prior to and after the project, questioned the usefulness of radiation physics teaching through MC and surveyed possible project improvements. Results: According to the survey, 76% of students had no or a basic knowledge of MC methods before the class and 65% estimate to have a good to very good understanding of MC methods after attending the class. 80% of students feel that the MC project helped them significantly to understand simulations of dose distributions. On average, students dedicated 12.5 hours to the project and appreciated the balance between hand-holding and questions/implications. Conclusion: A lecture on MC methods with a hands-on MC programming project requiring about 14 hours was added to the graduate study curriculum since 2012. MC methods produce “gold standard” dose distributions and slowly enter routine clinical work and a fundamental understanding of MC methods should be a requirement for future students. Overall, the lecture and project helped students relate crosssections to dose depositions and presented numerical sampling methods behind the simulation of these dose distributions. Research funding from governments of Canada and Quebec. PP acknowledges

  11. MO-E-18C-02: Hands-On Monte Carlo Project Assignment as a Method to Teach Radiation Physics

    Energy Technology Data Exchange (ETDEWEB)

    Pater, P; Vallieres, M; Seuntjens, J [McGill University, Montreal, Quebec (Canada)

    2014-06-15

    Purpose: To present a hands-on project on Monte Carlo methods (MC) recently added to the curriculum and to discuss the students' appreciation. Methods: Since 2012, a 1.5 hour lecture dedicated to MC fundamentals follows the detailed presentation of photon and electron interactions. Students also program all sampling steps (interaction length and type, scattering angle, energy deposit) of a MC photon transport code. A handout structured in a step-by-step fashion guides student in conducting consistency checks. For extra points, students can code a fully working MC simulation, that simulates a dose distribution for 50 keV photons. A kerma approximation to dose deposition is assumed. A survey was conducted to which 10 out of the 14 attending students responded. It compared MC knowledge prior to and after the project, questioned the usefulness of radiation physics teaching through MC and surveyed possible project improvements. Results: According to the survey, 76% of students had no or a basic knowledge of MC methods before the class and 65% estimate to have a good to very good understanding of MC methods after attending the class. 80% of students feel that the MC project helped them significantly to understand simulations of dose distributions. On average, students dedicated 12.5 hours to the project and appreciated the balance between hand-holding and questions/implications. Conclusion: A lecture on MC methods with a hands-on MC programming project requiring about 14 hours was added to the graduate study curriculum since 2012. MC methods produce “gold standard” dose distributions and slowly enter routine clinical work and a fundamental understanding of MC methods should be a requirement for future students. Overall, the lecture and project helped students relate crosssections to dose depositions and presented numerical sampling methods behind the simulation of these dose distributions. Research funding from governments of Canada and Quebec. PP acknowledges

  12. Getting started with Spring Framework a hands-on guide to begin developing applications using Spring Framework

    CERN Document Server

    Sharma, J

    2016-01-01

    Getting started with Spring Framework is a hands-on guide to begin developing applications using Spring Framework. The examples (consisting of 74 sample projects) that accompany this book are based on Spring 4.3 and Java 8. You can download the examples described in this book from the following GitHub project:github.com/getting-started-with-spring/3rdEdition This book is meant for Java developers with little or no knowledge of Spring Framework. Getting started with Spring Framework, Third Edition has been updated to reflect changes in Spring 4.3 and also includes new chapters on Java-based configuration and Spring Data (covers Spring Data JPA and Spring Data MongoDB projects). The existing chapters have been revised to include information on Java-based configuration. The book also includes some new information on bean definition profiles, importing application context XML files, lazy autowiring, creating custom qualifier annotations, JSR 349 annotations, spring-messaging module, Java 8's Optional type, and s...

  13. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE) version 5.0, technical reference manual

    International Nuclear Information System (INIS)

    Russell, K.D.; Atwood, C.L.; Galyean, W.J.; Sattison, M.B.; Rasmuson, D.M.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. This volume provides information on the principles used in the construction and operation of Version 5.0 of the Integrated Reliability and Risk Analysis System (IRRAS) and the System Analysis and Risk Assessment (SARA) system. It summarizes the fundamental mathematical concepts of sets and logic, fault trees, and probability. This volume then describes the algorithms that these programs use to construct a fault tree and to obtain the minimal cut sets. It gives the formulas used to obtain the probability of the top event from the minimal cut sets, and the formulas for probabilities that are appropriate under various assumptions concerning repairability and mission time. It defines the measures of basic event importance that these programs can calculate. This volume gives an overview of uncertainty analysis using simple Monte Carlo sampling or Latin Hypercube sampling, and states the algorithms used by these programs to generate random basic event probabilities from various distributions. Further references are given, and a detailed example of the reduction and quantification of a simple fault tree is provided in an appendix

  14. Quality control of structural MRI images applied using FreeSurfer - a hands-on workflow to rate motion artifacts

    Directory of Open Access Journals (Sweden)

    Lea Luise Backhausen

    2016-12-01

    Full Text Available In structural magnetic resonance imaging motion artifacts are common, especially when not scanning healthy young adults. It has been shown that motion affects the analysis with automated image-processing techniques (e.g. FreeSurfer. This can bias results. Several developmental and adult studies have found reduced volume and thickness of gray matter due to motion artifacts. Thus, quality control is necessary in order to ensure an acceptable level of quality and to define exclusion criteria of images (i.e. determine participants with most severe artifacts. However, information about the quality control workflow and image exclusion procedure is largely lacking in the current literature and the existing rating systems differ. Here we propose a stringent workflow of quality control steps during and after acquisition of T1-weighted images, which enables researchers dealing with populations that are typically affected by motion artifacts to enhance data quality and maximize sample sizes. As an underlying aim we established a thorough quality control rating system for T1-weighted images and applied it to the analysis of developmental clinical data using the automated processing pipeline FreeSurfer. This hands-on workflow and quality control rating system will aid researchers in minimizing motion artifacts in the final data set, and therefore enhance the quality of structural magnetic resonance imaging studies.

  15. The influence of sense of coherence and mindfulness on PTSD symptoms and posttraumatic cognitions in a sample of elderly Austrian survivors of World War II.

    Science.gov (United States)

    Glück, Tobias M; Tran, Ulrich S; Raninger, Simone; Lueger-Schuster, Brigitte

    2016-03-01

    Sense of Coherence (SOC) and mindfulness are known protective factors against psychopathology, also in older age. We set out to investigate the influence of SOC and mindfulness on posttraumatic symptoms and cognitions in the context of lifetime trauma in elderly persons with a history of childhood war-experiences. Elderly Austrians (N = 97) filled in questionnaires on traumatic lifetime experiences and posttraumatic symptoms (ETI), posttraumatic cognitions (PTCI), SOC (SOC-13) and mindfulness (FFMQ). We expected the influence of SOC scores on posttraumatic symptoms and cognitions to be on one hand influenced by mindfulness. On the other hand, we expected that both aspects would uniquely explain fewer posttraumatic symptoms and cognitions. Participants reported various lifetime traumas (M = 2.42), including experiences during World War II (WWII) as children and adolescents. Mindfulness partially mediated the association of SOC scores with posttraumatic cognitions, but not with posttraumatic symptoms. However, in a two-stage mediation model, mindfulness significantly predicted posttraumatic symptoms via its effects on posttraumatic cognitions. Although SOC was the strongest predictor of posttraumatic symptoms, mindfulness influenced the severity of posttraumatic symptoms via its effects on posttraumatic cognitions. We discuss implications for mindfulness-based interventions on trauma-related cognitions in the elderly.

  16. The Effectiveness of Hands-on Health Informatics Skills Exercises in the Multidisciplinary Smart Home Healthcare and Health Informatics Training Laboratories.

    Science.gov (United States)

    Sapci, A H; Sapci, H A

    2017-10-01

    This article aimed to evaluate the effectiveness of newly established innovative smart home healthcare and health informatics laboratories, and a novel laboratory course that focuses on experiential health informatics training, and determine students' self-confidence to operate wireless home health monitoring devices before and after the hands-on laboratory course. Two web-based pretraining and posttraining questionnaires were sent to 64 students who received hands-on training with wireless remote patient monitoring devices in smart home healthcare and health informatics laboratories. All 64 students completed the pretraining survey (100% response rate), and 49 students completed the posttraining survey (76% response rate). The quantitative data analysis showed that 95% of students had an interest in taking more hands-on laboratory courses. Sixty-seven percent of students had no prior experience with medical image, physiological data acquisition, storage, and transmission protocols. After the hands-on training session, 75.51% of students expressed improved confidence about training patients to measure blood pressure monitor using wireless devices. Ninety percent of students preferred to use a similar experiential approach in their future learning experience. Additionally, the qualitative data analysis demonstrated that students were expecting to have more courses with hands-on exercises and integration of technology-enabled delivery and patient monitoring concepts into the curriculum. This study demonstrated that the multidisciplinary smart home healthcare and health informatics training laboratories and the hands-on exercises improved students' technology adoption rates and their self-confidence in using wireless patient monitoring devices. Schattauer GmbH Stuttgart.

  17. All in: expansion of the acquisition of data for outcomes and procedure transfer (ADOPT) program to an entire SAGES annual meeting hands-on hernia course.

    Science.gov (United States)

    Dort, Jonathan; Trickey, Amber; Paige, John; Schwarz, Erin; Cecil, Tom; Coleman, Mark; Dunkin, Brian

    2018-05-01

    Continuing professional development (CPD) for the surgeon has been challenging because of a lack of standardized approaches of hands-on courses, resulting in poor post-course outcomes. To remedy this situation, SAGES has introduced the ADOPT program, implementing a standardized, long-term mentoring program as part of its hernia hands-on course. Previous work evaluating the pilot program showed increased adoption of learned procedures as well as increased confidence of the mentored surgeons. This manuscript describes the impact of such a program when it is instituted across an entire hands-on course. Following collection of pre-course benchmark data, all participants in the 2016 SAGES hands-on hernia course underwent structured, learner-focused instruction during the cadaveric lab. All faculty had completed a standardized teaching course in the Lapco TT format. Subsequently, course participants were enrolled in a year-long program involving longitudinal mentorship, webinars, conference calls, and coaching. Information about participant demographics, training, experience, self-reported case volumes, and confidence levels related to procedures were collected via survey 3 months prior to 9 months after the course. Twenty surgeons participated in the SAGES ADOPT 2016 hands-on hernia program. Of these, seventeen completed pre-course questionnaires (85%), ten completed the 3-month questionnaire (50%), and four completed the 9-month questionnaire (20%). Nine of ten respondents of the 3-month survey (90%) reported changes in their practice. In the 9-month survey, significant increases in the annualized procedural volumes were reported for open primary ventral hernia repair, open components separation, and mesh insertion for ventral hernia repair (p ADOPT program to an entire hands-on hernia course is both feasible and beneficial, with evidence of Kirkpatrick Levels 1-4a training effectiveness. This expanded success suggests that it is a useful blueprint for the CPD of

  18. Providing Hands on Experiences to Museum Visitors to Explore and Learn about Earthquakes and their Impacts in the Pacific Northwest

    Science.gov (United States)

    Olds, S. E.; Schiffman, C. R.; Butler, R. F.; Farley, M.; Frankel, S.; Hunter, N.; Lillie, R. J.

    2013-12-01

    Over the past ten years, UNAVCO has developed a suite of learning materials for formal undergraduate and grades 6-12 classroom environments, integrating GPS data from the EarthScope Plate Boundary Observatory (PBO) to explore Earth science processes. To make complex Earth processes accessible to general audiences, UNAVCO has designed a multi-component visiting museum exhibit that explores the tectonic setting of the United States Pacific Northwest, hazards of living on a plate boundary, and the technologies being used to study the plate motion and in the future, help communities become more resilient to the impacts of earthquakes. This exhibit was installed in Fall 2013 at the Oregon State University (OSU) Hatfield Marine Science Center (HMSC) in Newport, Oregon. Through multiple hands-on elements, visitors to the HMSC exhibit explore and experience the build up and release of strain in the region, along with some of the technologies used to measure these changes. In one component, visitors compress a model of the Pacific Northwest to feel the build up of strain in the landscape and observe the movement of land over time. Supporting panels connect this movement to the measurements currently being observed by the network of PBO and other GPS stations in the Pacific Northwest. In another component, visitors learn about the recurrence interval for earthquakes at the Juan De Fuca - North America plate boundary by turning a handle to slowly move and compress plates until a simulated earthquake occurs. A related component explores how an earthquake early warning system (EEWS) of the future might combine seismic data collected by both seismometers and real time GPS to allow people and communities time to prepare for oncoming ground shaking and tsunami after an earthquake. Several technologies are also highlighted throughout the exhibit, including information panels that compare the accuracy of high precision GPS with smartphone technologies. Additionally, models of a full

  19. Computer Assisted Fluid Power Instruction: A Comparison of Hands-On and Computer-Simulated Laboratory Experiences for Post-Secondary Students

    Science.gov (United States)

    Wilson, Scott B.

    2005-01-01

    The primary purpose of this study was to examine the effectiveness of utilizing a combination of lecture and computer resources to train personnel to assume roles as hydraulic system technicians and specialists in the fluid power industry. This study compared computer simulated laboratory instruction to traditional hands-on laboratory instruction,…

  20. Blended Learning Model on Hands-On Approach for In-Service Secondary School Teachers: Combination of E-Learning and Face-to-Face Discussion

    Science.gov (United States)

    Ho, Vinh-Thang; Nakamori, Yoshiteru; Ho, Tu-Bao; Lim, Cher Ping

    2016-01-01

    The purpose of this study was to examine the effectiveness of a blended learning model on hands-on approach for in-service secondary school teachers using a quasi-experimental design. A 24-h teacher-training course using the blended learning model was administered to 117 teachers, while face-to-face instruction was given to 60 teachers. The…

  1. Examining the Use of Adaptive Technologies to Increase the Hands-On Participation of Students with Blindness or Low Vision in Secondary-School Chemistry and Physics

    Science.gov (United States)

    Supalo, Cary A.; Humphrey, Jennifer R.; Mallouk, Thomas E.; Wohlers, H. David; Carlsen, William S.

    2016-01-01

    To determine whether a suite of audible adaptive technologies would increase the hands-on participation of high school students with blindness or low vision in chemistry and physics courses, data were examined from a multi-year field study conducted with students in mainstream classrooms at secondary schools across the United States. The students…

  2. The Interplay of Students' Motivational Orientations, Their Chemistry Achievements and Their Perception of Learning within the Hands-On Approach to Visible Spectrometry

    Science.gov (United States)

    Jurisevic, Mojca; Vrtacnik, Margareta; Kwiatkowski, Marek; Gros, Natasa

    2012-01-01

    The purpose of the study was to determine the relationship between students' motivational orientations and their chemistry achievements and perception of learning within the original case of the hands-on approach to visible spectrometry. A total of 295 students from Polish and Slovenian vocational and technical high schools participated in the…

  3. The Effect of an Instructional Model Utilizing Hands-on Learning and Manipulatives on Math Achievement of Middle School Students in Georgia

    Science.gov (United States)

    White, Kara Morgan

    2012-01-01

    The concepts and ideas of mathematics is a major element of educational curriculum. Many different instructional strategies are implemented in mathematics classrooms. The purpose of this study was to evaluate the effect of an instructional model utilizing hands-on learning and use of manipulatives on mathematics achievement of middle school…

  4. Multidisciplinary Graduate Training in Social Research Methodology and Computer-Assisted Qualitative Data Analysis: A Hands-On/Hands-Off Course Design

    Science.gov (United States)

    Bourque, Claude Julie; Bourdon, Sylvain

    2017-01-01

    Drawing on the experience of training graduate students and researchers in qualitative and mixed-methods analysis since the mid-1990s, the authors reflect on the evolution of a multidisciplinary graduate course developed in a Canadian university since 2007. The hands-on/hands-off course design based on the use of NVivo was developed in parallel…

  5. Symposium 20 - PABMB: Teaching biochemistry in a connected world: Hands-on inquiry-based biochemistry courses for improving scientific literacy of school teachers and students

    Directory of Open Access Journals (Sweden)

    Andrea T. da Poian

    2015-08-01

    Full Text Available Wednesday – August 26th, 2015 - 3:30 to 5:30 pm – Room: Iguaçu II – 5th floorSymposium 20 - PABMB: Teaching biochemistry in a connected world Chair: Miguel Castanho, Universidade de Lisboa, PortugalAbstract:In the last decades, Brazil has reached a prominent position in the world rank of scientific production. Despite this progress, the establishment of a scientific culture in Brazilian society is still challenging. Our group has been offering hands-on inquiry-based courses to primary and secondary students, which aim to introduce them to the scientific method and improve their interest in science. More recently, we started new initiatives focused on the improvement of the scientific literacy of school science teachers. Here we describe two intensive short-term courses designed in different formats. One consists in a discipline offered to a Master Program to school science teachers, in which the main objective was to work with core disciplinary concepts through an active teachers engagement in “doing science”. The discipline, named “Energy transformation in the living organisms”, intends to deal with the main Biochemistry subjects that take part of the high-school science curriculum, namely, fermentation, photosynthesis and cellular respiration processes. The other initiative was developed in Urucureá, a small community with about 600 residents, located on the banks of the River Arapiuns, in Amazonia region. We trained the local school teachers to act as tutors in the course offered to 40 students of the community, ages 10 to 17. The theme we chose to address was the properties and effects of snakes´ poisons, since poisoning events are a problem with which the local community frequently deal with. Another important point was that we adapted a number of experiments to make them feasible with very limited laboratory resources. Our results show that the activities that we have developed offer real opportunity of scientific training

  6. Using place-based concepts, multicultural lenses, and hands-on experience to broaden participation in the sciences for native youth

    Science.gov (United States)

    Flick, K. C.; Keepseagle, L.

    2013-12-01

    . Through field trips to broaden perspective, self-directed action research projects, and formal and informal classroom settings, the SLC serves as a stepping stone for students to discover Science/Math/ Technology-related careers and interact with people and professionals of all ages who pursue these careers. SLC participation empowers young students so they may one day serve as leaders and roles models to positively influence their classmates, schools, and communities for future generations. Through this collaborative education design process we have used place-based concepts, multicultural lenses, and hands-on experiences to explore reciprocal learning relationships which broaden participation of native students in geosciences and geoscientists' participation in cultural teachings.

  7. MO-AB-210-00: Diagnostic Ultrasound Imaging Quality Control and High Intensity Focused Ultrasound Therapy Hands-On Workshop

    International Nuclear Information System (INIS)

    2015-01-01

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  8. MO-AB-210-00: Diagnostic Ultrasound Imaging Quality Control and High Intensity Focused Ultrasound Therapy Hands-On Workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-06-15

    The goal of this ultrasound hands-on workshop is to demonstrate advancements in high intensity focused ultrasound (HIFU) and to demonstrate quality control (QC) testing in diagnostic ultrasound. HIFU is a therapeutic modality that uses ultrasound waves as carriers of energy. HIFU is used to focus a beam of ultrasound energy into a small volume at specific target locations within the body. The focused beam causes localized high temperatures and produces a well-defined regions of necrosis. This completely non-invasive technology has great potential for tumor ablation and targeted drug delivery. At the workshop, attendees will see configurations, applications, and hands-on demonstrations with on-site instructors at separate stations. The involvement of medical physicists in diagnostic ultrasound imaging service is increasing due to QC and accreditation requirements. At the workshop, an array of ultrasound testing phantoms and ultrasound scanners will be provided for attendees to learn diagnostic ultrasound QC in a hands-on environment with live demonstrations of the techniques. Target audience: Medical physicists and other medical professionals in diagnostic imaging and radiation oncology with interest in high-intensity focused ultrasound and in diagnostic ultrasound QC. Learning Objectives: Learn ultrasound physics and safety for HIFU applications through live demonstrations Get an overview of the state-of-the art in HIFU technologies and equipment Gain familiarity with common elements of a quality control program for diagnostic ultrasound imaging Identify QC tools available for testing diagnostic ultrasound systems and learn how to use these tools List of supporting vendors for HIFU and diagnostic ultrasound QC hands-on workshop: Philips Healthcare Alpinion Medical Systems Verasonics, Inc Zonare Medical Systems, Inc Computerized Imaging Reference Systems (CIRS), Inc. GAMMEX, Inc., Cablon Medical BV Steffen Sammet: NIH/NCI grant 5R25CA132822, NIH/NINDS grant 5R25NS

  9. Objective structured assessment of technical skills evaluation of theoretical compared with hands-on training of shoulder dystocia management: a randomized controlled trial.

    Science.gov (United States)

    Buerkle, Bernd; Pueth, Julia; Hefler, Lukas A; Tempfer-Bentz, Eva-Katrin; Tempfer, Clemens B

    2012-10-01

    To compare the skills of performing a shoulder dystocia management algorithm after hands-on training compared with demonstration. We randomized medical students to a 30-minute hands-on (group 1) and a 30-minute demonstration (group 2) training session teaching a standardized shoulder dystocia management scheme on a pelvic training model. Participants were tested with a 22-item Objective Structured Assessment of Technical Skills scoring system after training and 72 hours thereafter. Objective Structured Assessment of Technical Skills scores were the primary outcome. Performance time, self-assessment, confidence, and global rating scale were the secondary outcomes. Statistics were performed using Mann-Whitney U test, χ test, and multiple linear regression analysis. Two hundred three participants were randomized. Objective Structured Assessment of Technical Skills scores were significantly higher in group 1 (n=103) compared with group 2 (n=100) (17.95±3.14 compared with 15.67±3.18, respectively; PTechnical Skills scores were still significantly higher in group 1 (n=67) compared with group 2 (n=60) (18.17±2.76 compared with 14.98±3.03, respectively; PTechnical Skills scores. Hands-on training helps to achieve a significant improvement of shoulder dystocia management on a pelvic training model. www.ClinicalTrials.gov, NCT01618565. I.

  10. Effects of mindfulness on maternal stress, depressive symptoms and awareness of present moment experience: A pilot randomised trial.

    Science.gov (United States)

    Beattie, Jill; Hall, Helen; Biro, Mary Anne; East, Christine; Lau, Rosalind

    2017-07-01

    . Adequately powered RCTs, with an active control, long-term follow up and economic evaluation are recommended. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Math in Motion: Origami in the Classroom. A Hands-On Creative Approach to Teaching Mathematics. K-8.

    Science.gov (United States)

    Pearl, Barbara

    This perfect bound teacher's guide presents techniques and activities to teach mathematics using origami paper folding. Part 1 includes a history of origami, mathematics and origami, and careers using mathematics. Parts 2 and 3 introduce paper-folding concepts and teaching techniques and include suggestions for low-budget paper resources. Part 4…

  12. Early intensive hand rehabilitation after spinal cord injury ("Hands On": a protocol for a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Hsueh Ya-Seng

    2011-01-01

    Full Text Available Abstract Background Loss of hand function is one of the most devastating consequences of spinal cord injury. Intensive hand training provided on an instrumented exercise workstation in conjunction with functional electrical stimulation may enhance neural recovery and hand function. The aim of this trial is to compare usual care with an 8-week program of intensive hand training and functional electrical stimulation. Methods/design A multicentre randomised controlled trial will be undertaken. Seventy-eight participants with recent tetraplegia (C2 to T1 motor complete or incomplete undergoing inpatient rehabilitation will be recruited from seven spinal cord injury units in Australia and New Zealand and will be randomised to a control or experimental group. Control participants will receive usual care. Experimental participants will receive usual care and an 8-week program of intensive unilateral hand training using an instrumented exercise workstation and functional electrical stimulation. Participants will drive the functional electrical stimulation of their target hands via a behind-the-ear bluetooth device, which is sensitive to tooth clicks. The bluetooth device will enable the use of various manipulanda to practice functional activities embedded within computer-based games and activities. Training will be provided for one hour, 5 days per week, during the 8-week intervention period. The primary outcome is the Action Research Arm Test. Secondary outcomes include measurements of strength, sensation, function, quality of life and cost effectiveness. All outcomes will be taken at baseline, 8 weeks, 6 months and 12 months by assessors blinded to group allocation. Recruitment commenced in December 2009. Discussion The results of this trial will determine the effectiveness of an 8-week program of intensive hand training with functional electrical stimulation. Trial registration NCT01086930 (12th March 2010 ACTRN12609000695202 (12th August 2009

  13. Early intensive hand rehabilitation after spinal cord injury ("Hands On"): a protocol for a randomised controlled trial.

    Science.gov (United States)

    Harvey, Lisa A; Dunlop, Sarah A; Churilov, Leonid; Hsueh, Ya-Seng Arthur; Galea, Mary P

    2011-01-17

    Loss of hand function is one of the most devastating consequences of spinal cord injury. Intensive hand training provided on an instrumented exercise workstation in conjunction with functional electrical stimulation may enhance neural recovery and hand function. The aim of this trial is to compare usual care with an 8-week program of intensive hand training and functional electrical stimulation. A multicentre randomised controlled trial will be undertaken. Seventy-eight participants with recent tetraplegia (C2 to T1 motor complete or incomplete) undergoing inpatient rehabilitation will be recruited from seven spinal cord injury units in Australia and New Zealand and will be randomised to a control or experimental group. Control participants will receive usual care. Experimental participants will receive usual care and an 8-week program of intensive unilateral hand training using an instrumented exercise workstation and functional electrical stimulation. Participants will drive the functional electrical stimulation of their target hands via a behind-the-ear bluetooth device, which is sensitive to tooth clicks. The bluetooth device will enable the use of various manipulanda to practice functional activities embedded within computer-based games and activities. Training will be provided for one hour, 5 days per week, during the 8-week intervention period. The primary outcome is the Action Research Arm Test. Secondary outcomes include measurements of strength, sensation, function, quality of life and cost effectiveness. All outcomes will be taken at baseline, 8 weeks, 6 months and 12 months by assessors blinded to group allocation. Recruitment commenced in December 2009. The results of this trial will determine the effectiveness of an 8-week program of intensive hand training with functional electrical stimulation. NCT01086930 (12th March 2010)ACTRN12609000695202 (12th August 2009).

  14. Keeping Things Mindfully on Track

    DEFF Research Database (Denmark)

    Hernes, Tor; Irgens, Eirik J.

    2013-01-01

    an investment of effort, mindfulness and preparedness for change, even if no perceptible change occurs. Although the organizational literature has to some extent dealt with learning under continuity, putting it more firmly on the organizational learning agenda is necessary. A central element of a more explicit...

  15. A combined hands-on teaching programme and clinical pathway focused on pleural ultrasound and procedure supervision transforms pleural procedure outcomes.

    Science.gov (United States)

    Edwards, Timothy; Cook, Alistair; Salamonsen, Matthew; Bashirzadeh, Farzad; Fielding, David

    2017-11-01

    Management of pleural effusions is a common diagnostic and management problem. We reviewed the outcomes from pleural procedures after the instigation of pleural effusion management guidelines, focusing on pleural ultrasound and a hands-on teaching programme followed by procedure supervision that enabled many operators to perform such procedures. This is a retrospective analysis of all procedures performed for pleural effusions on medical patients. Outcomes were assessed prior to the instigation of pleural effusion management guidelines (pleural pathway) and hands-on teaching (January 2010 to June 2011) and following these interventions (January 2012 to June 2013). A total of 171 procedures involving 129 patients (pre-pathway group) and 146 procedures involving 115 patients (post-pathway group) was analysed. The rate of complications prior to the pleural pathway was 22.2% (38 of 171 procedures). Following the pathway, the rate of complications declined to 7.5% (11 of 146 procedures, P < 0.003). The use of pleural ultrasound increased dramatically (72.5 vs 90.2%). The number of patients who underwent repeated procedures (defined as ≥3) reduced dramatically (21 vs 7, P < 0.01). This improvement occurred using many supervised operators who completed the hands-on teaching programme (n = 32) and followed the pleural pathway (127 of 146 procedures). The instigation of a clinical pathway focused on the use of bedside pleural ultrasound, and teaching of drainage techniques with procedure supervision vastly improved patient outcomes. This not only allowed better quality of care for patients, it also provided the acquisition of new skills to medical staff, not limiting these skills to specialised staff. © 2017 Royal Australasian College of Physicians.

  16. The Alaska Lake Ice and Snow Observatory Network (ALISON): Hands-on Experiential K- 12 Learning in the North

    Science.gov (United States)

    Morris, K.; Jeffries, M.

    2008-12-01

    their own. Each summer, a workshop in Fairbanks offers the teachers the opportunity to work and learn together, sharing their ALISON field experiences and transfer to the classroom, testing activities and materials, and adding to their content knowledge. This experiential learning project demonstrates that teachers and students can make scientifically valuable measurements when provided with easy-to-use equipment, clear directions and training. The project also shows that when provided with a stimulating learning opportunity, teachers and students find imaginative ways to extend the experience. For example, a number of students have made videos about their ALISON. Lesson plans using ALISON-related science concepts have been generated by ALISON teachers and others. Several ALISON teachers have published articles about the ALISON experience. ALISON teachers have been awarded prestigious Toyota Tapestry grants in support of their activities.

  17. Object-oriented design and programming with C++ your hands-on guide to C++ programming, with special emphasis on design, testing, and reuse

    CERN Document Server

    Leach, Ronald

    2014-01-01

    Object-Oriented Design and Programming with C++: Your Hands-On Guide to C++ Programming, with Special Emphasis on Design, Testing, and Reuse provides a list of software engineering principles to guide the software development process. This book presents the fundamentals of the C++ language.Organized into two parts encompassing 10 chapters, this book begins with an overview of C++ and describes object-oriented programming and the history of C++. This text then introduces classes, polymorphism, inheritance, and overloading. Other chapters consider the C++ preprocessor and organization of class l

  18. Pengetahuan dan sikap ibu tentang kebersihan gigi dan mulut pasca ceramah pendidikan kesehatan gigi disertai diskusi kelompok atau disertai hands on

    Directory of Open Access Journals (Sweden)

    Agusthinus Wali

    2017-01-01

    Full Text Available ABSTRACT: The difference increased knowledge and attitudes of mothers about oral hygiene through dental health education lecture with discussion groups and lectures with hands on. Dental health education will be more effective when started from the family by teaching the mothers about the importance of oral health maintenance. This study aims to determine the difference in the increased knowledge and the attitudes of mothers about oral hygiene through dental health education lecture with discussion groups and lectures with hands on. This study was a quasi-experimental design with pretest and post-test group design. The subjects of research were 95 mothers of children aged 6-8 years who met the inclusion criteria and divided into two groups. Group I in PPA IO-497 Benjamin Oebufu, Kupang (53 subjects were given a lecture with discussion groups and group II in PPA IO-495 Alfa Omega Bakunase 2, Kota Kupang with total of 42 subjects were given a lecture with hands on. Measuring tool was a questionnaire. The analysis of data using Statistic Program for Social Science (SPSS for a different test testing the T-test for normal distribution of data, while the Mann-Whitney test and the Wilcoxon Signed Rank test were for abnormal distribution data. The initial analysis on knowledge and attitudes obtained some comparable results in which there were no differences between treatment groups I and II (p > 0.05. The results of the analysis of mean differences between groups on post-test 1 and 2 showed some significant differences knowledge and attitudes in the treatment group II of the treatment group I (p < 0.05. The results of the analysis of the average increase showed the increased knowledge and attitudes were significant in both treatment groups. Delta analysis results from pre-test to post-test 1 and pre-test to post-test 2 showed the treatment group improved knowledge and attitudes II is higher than in the treatment group I (p < 0.05. Dental health

  19. Teaching bioprocess engineering to undergraduates: Multidisciplinary hands-on training in a one-week practical course.

    Science.gov (United States)

    Henkel, Marius; Zwick, Michaela; Beuker, Janina; Willenbacher, Judit; Baumann, Sandra; Oswald, Florian; Neumann, Anke; Siemann-Herzberg, Martin; Syldatk, Christoph; Hausmann, Rudolf

    2015-01-01

    Bioprocess engineering is a highly interdisciplinary field of study which is strongly benefited by practical courses where students can actively experience the interconnection between biology, engineering, and physical sciences. This work describes a lab course developed for 2nd year undergraduate students of bioprocess engineering and related disciplines, where students are challenged with a real-life bioprocess-engineering application, the production of recombinant protein in a fed-batch process. The lab course was designed to introduce students to the subject of operating and supervising an experiment in a bioreactor, along with the analysis of collected data and a final critical evaluation of the experiment. To provide visual feedback of the experimental outcome, the organism used during class was Escherichia coli which carried a plasmid to recombinantly produce enhanced green fluorescent protein (eGFP) upon induction. This can easily be visualized in both the bioreactor and samples by using ultraviolet light. The lab course is performed with bioreactors of the simplest design, and is therefore highly flexible, robust and easy to reproduce. As part of this work the implementation and framework, the results, the evaluation and assessment of student learning combined with opinion surveys are presented, which provides a basis for instructors intending to implement a similar lab course at their respective institution. © 2015 by the International Union of Biochemistry and Molecular Biology.

  20. How the HYPATIA analysis tool is used as a hands-on experience to introduce HEP to high schools

    CERN Document Server

    Kourkoumelis, C

    2016-01-01

    HYPATIA'' is a tool for interactive analysis of data from the ATLAS experiment at the Large Hadron Collider of CERN. It has been created by the authors and has been evolving over a number of years. It is available in a dowloadable version, which is regularly used in the International Masterclasses, and an online version which now exists in the form of a webapp. Furthermore, the data from ATLAS, which are necessary for performing different educational analysis paths, are available online. Such examples of interactive analyses vary from the estimation of the magnetic field of the ATLAS solenoid magnet, to detecting \\textquotedblleft pseudo\\textquotedblright~ Higgs events. These applications have been used in recent years in a large number of schools in the form of a half-day mini local (or even remote) masterclass. These activities have been supported by various European Union outreach programs which give emphasis to promoting science education in schools through new methods based on the inquiry based technique...

  1. Human Driving Forces and Their Impacts on Land Use/Land Cover. Hands-On! Developing Active Learning Modules on the Human Dimensions of Global Change.

    Science.gov (United States)

    Moser, Susanne

    This learning module aims to engage students in problem solving, critical thinking, scientific inquiry, and cooperative learning. The module is appropriate for use in any introductory or intermediate undergraduate course that focuses on human-environment relationships. The module explains that land use/cover change has occurred at all times in all…

  2. Digging up your dirt. High school students combine small-scale respiration and soil carbon measurements with satellite imagery in hands-on inquiry activities.

    Science.gov (United States)

    Kemper, K.; Throop, H.

    2015-12-01

    One of the greatest impacts on the global carbon cycle is changes in land use. Making this concept relevant and inquiry-based for high school students is challenging. Many are familiar with reconstructing paleo-climate from ice core data, but few have a connection to current climate research. Many students ask questions like 'What will our area be like in 20 years?' or 'How much does planting trees help?' while few have the scientific language to engage in a discussion to answer these questions. Our work connects students to climate change research in several ways: first, teacher Keska Kemper engaged in field research with Dr. Heather Throop creating a 'teacher in the field' perspective for students in the classroom. Dr. Throop met with Keska Kemper's students several times to develop an inquiry-based field study. Students predicted and then measured rates of respiration between different soil types in an urban park close to their school. Students then could compare their results from Portland, Oregon to Throop's work across a rain gradient in Australia. Discussions about percent tree cover and soil carbon helped students see connections between land use changes and changes in carbon cycling. Last, students examined satellite imagery to determine percent tree cover and numberss of trees to compare to soil carbon in the same region. Students were able to examine imagery over the last 30 years to visualize land use changes in the greater Portland area.

  3. Introducing Basic Molecular Biology to Turkish Rural and Urban Primary School Children via Hands-on PCR and Gel Electrophoresis Activities

    Science.gov (United States)

    Selli, Cigdem; Yildirim, Gokce; Kaymak, Aysegul; Karacicek, Bilge; Ogut, Deniz; Gungor, Turkan; Erem, Erdem; Ege, Mehmet; Bümen, Nilay; Tosun, Metiner

    2014-01-01

    This study includes the results of a 2-day education project titled "Molecular Biology Laboratory Summer School, MoBiLYO." The project was held at a University Research Center by scientists from Department of Pharmacology and graduate students. The project was composed of introductory lectures, model construction, DNA isolation,…

  4. Hands-On Crops! How Long-Term Activities Improve Students' Knowledge of Crop Species. A Pretest-Posttest Study of the Greenhouse Project

    Science.gov (United States)

    Fritsch, Eva-Maria; Lechner-Walz, Cornelia; Dreesmann, Daniel C.

    2015-01-01

    In terms of sustainability, renewable resources, nourishment and healthy diet, crops are important to the public. Thus, knowledge of crops is needed in order to enable people to participate in public discussions and take responsibility. This is in contrast to former surveys showing that students' knowledge of and interest in plants in general,…

  5. A New Two-Step Approach for Hands-On Teaching of Gene Technology: Effects on Students' Activities during Experimentation in an Outreach Gene Technology Lab

    Science.gov (United States)

    Scharfenberg, Franz-Josef; Bogner, Franz X.

    2011-01-01

    Emphasis on improving higher level biology education continues. A new two-step approach to the experimental phases within an outreach gene technology lab, derived from cognitive load theory, is presented. We compared our approach using a quasi-experimental design with the conventional one-step mode. The difference consisted of additional focused…

  6. El profesor como investigador: ¡acción ya! The teacher as a researcher: hands-on

    Directory of Open Access Journals (Sweden)

    Terribili Filho Armando

    2009-07-01

    Full Text Available El texto presenta la importancia de la investigación en el día a día del profesor, mostrando que investigación y docencia son indisociables: sea investigación stricto sensu (en nivel de maestría o doctorado o de su práctica pedagógica, aquella que el profesor debe y puede hacer en su cotidiano. Este artigo presenta los resultados de dos trabajos desarrollados en sala de aula: el primer con 117 alumnos de post-graduación de las ciudades de São Paulo y São José dos Campos (ambas en Brasil, para validar se la retención de conocimientos está asociada con el uso de los sentidos, o sea, se la comentada relación de retención 20%, 30% e 50% es verdadera: 20% para oír, 30% para oír y ver, y 50% para oír, ver y hacer. La segunda investigación fue hecha con 75 alumnos de post-graduación de una única institución de enseñanza de la ciudad de São Paulo, que ya son o que serán profesores de enseñanza superior. Esta investigación mostró cuales fueran los profesores más inolvidables que han tenido, quienes fueran estos profesores, cuales los atributos que tenían, se e fuera posible, que mensajes mandarían hoy para eses profesores. This text presents us how important is the research in the day-by-day of the teacher, showing that researching and teaching are parts of the same object: the human knowledge. Research can be qualified as two types: stricto sensu (work developed in order to obtain master and doctor degrees and pedagogical practices (work developed during teaching activity in order to improve the performance. This text also displays the results of two researches: the first one was done with 117 post-graduation students from the Brazilian cities of São Paulo and São Jose dos Campos, to verify if the known relation 20%, 30% e 50% (20% to hear; 30% to hear and to see; and 50% to hear, to see and to practice, related to the retention of information using the senses is true. The second research was done with 75 post

  7. Objective Structured Assessment of Technical Skills (OSATS) evaluation of theoretical versus hands-on training of vaginal breech delivery management: a randomized trial.

    Science.gov (United States)

    Buerkle, Bernd; Rueter, Katharina; Hefler, Lukas A; Tempfer-Bentz, Eva-Katrin; Tempfer, Clemens B

    2013-12-01

    To compare the skills of performing a vaginal breech (VB) delivery after hands-on training versus demonstration. We randomized medical students to a 30-min demonstration (group 1) or a 30-min hands-on (group 2) training session using a standardized VB management algorithm on a pelvic training model. Subjects were tested with a 25 item Objective Structured Assessment of Technical Skills (OSATS) scoring system immediately after training and 72 h thereafter. OSATS scores were the primary outcome. Performance time (PT), self assessment (SA), confidence (CON), and global rating scale (GRS) were the secondary outcomes. Statistics were performed using the Mann-Whitney U-test, chi-square test, and multiple linear regression analysis. 172 subjects were randomized. OSATS scores (primary outcome) were significantly higher in group 2 (n=88) compared to group 1 (n=84) (21.18±2.29 vs. 20.19±2.37, respectively; p=0.006). The secondary outcomes GRS (10.31±2.28 vs. 9.17±2.21; p=0.001), PT (214.60±57.97 s vs. 246.98±59.34 s; ptraining leads to a significant improvement of VB management in a pelvic training model, but this effect was only seen in the short term. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  8. A randomized comparison of video demonstration versus hands-on training of medical students for vacuum delivery using Objective Structured Assessment of Technical Skills (OSATS).

    Science.gov (United States)

    Hilal, Ziad; Kumpernatz, Anne K; Rezniczek, Günther A; Cetin, Cem; Tempfer-Bentz, Eva-Katrin; Tempfer, Clemens B

    2017-03-01

    To compare medical students' skills for vaginal operative delivery by vacuum extraction (VE) after hands-on training versus video demonstration. We randomized medical students to an expert demonstration (group 1) or a hands-on (group 2) training using a standardized VE algorithm on a pelvic training model. Students were tested with a 40-item Objective Structured Assessment of Technical Skills (OSATS) scoring system after training and 4 days later. OSATS scores were the primary outcome. Performance time, self-assessment, confidence, and global rating scale were secondary outcomes. We assessed the constructive validity of OSATS in this VE model comparing metric scores of experts and students. In all, 137 students were randomized. OSATS scores were higher in group 2 (n = 63) compared with group 1 (n = 74) (32.89 ± 6.39 vs 27.51 ± 10.27, respectively; P training is superior to video demonstration for teaching VE on a pelvic model.

  9. Hands-on glovebox decommissioning

    International Nuclear Information System (INIS)

    Smith, D.

    1997-01-01

    Over recent years, the United Kingdom Atomic Energy Authority (UKAEA) has undertaken the decommissioning of a large number of Plutonium glove boxes at Winfrith Technology Centre. UKAEA has managed this work on behalf of the DTI, who funded most of the work. Most of the planning and practical work was contracted to AEA Technology (AEAT), which, until 1996, was the commercial arm of UKAEA, but is now a private company. More than 70 gloveboxes, together with internal plant and equipment such as ball mills, presses and furnaces, have been successfully size reduced into drums for storage, leaving the area, in which they were situated, in a clean condition. (UK)

  10. Hands-on Universe - Europe

    Science.gov (United States)

    Ferlet, R.

    2006-08-01

    The EU-HOU project aims at re-awakening the interest for science through astronomy and new technologies, by challenging middle and high schools pupils. It relies on real observations acquired through an internet-based network of robotic optical and radio telescopes or with didactical tools such as Webcam. Pupils manipulate and measure images in the classroom environment, using the specifically designed software SalsaJ, within pedagogical trans-disciplinary resources constructed in close collaboration between researchers and teachers. Gathering eight European countries coordinated in France, EU-HOU is partly funded by the European Union. All its outputs are freely available on the Web, in English and the other languages involved. A European network of teachers is being developed through training sessions.

  11. Getting Our Hands on History

    Science.gov (United States)

    Hindle, Rob

    2012-01-01

    Adult learning enhances, sometimes changes lives. It is therefore vital that educators do whatever it takes to enable more people from under-represented groups to get involved in learning. This is central to the Workers' Educational Association's (WEA) vision and values. Yet among its range of programmes, some subject areas remain the preserve of…

  12. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE), Version 5.0. Volume 5, Systems Analysis and Risk Assessment (SARA) tutorial manual

    International Nuclear Information System (INIS)

    Sattison, M.B.; Russell, K.D.; Skinner, N.L.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs) primarily for nuclear power plants. This volume is the tutorial manual for the Systems Analysis and Risk Assessment (SARA) System Version 5.0, a microcomputer-based system used to analyze the safety issues of a open-quotes familyclose quotes [i.e., a power plant, a manufacturing facility, any facility on which a probabilistic risk assessment (PRA) might be performed]. A series of lessons is provided that guides the user through some basic steps common to most analyses performed with SARA. The example problems presented in the lessons build on one another, and in combination, lead the user through all aspects of SARA sensitivity analysis capabilities

  13. Real-time development of data acquisition and analysis software for hands-on physiology education in neuroscience: G-PRIME.

    Science.gov (United States)

    Lott, Gus K; Johnson, Bruce R; Bonow, Robert H; Land, Bruce R; Hoy, Ronald R

    2009-01-01

    We report on the real-time creation of an application for hands-on neurophysiology in an advanced undergraduate teaching laboratory. Enabled by the rapid software development tools included in the Matlab technical computing environment (The Mathworks, Natick, MA), a team, consisting of a neurophysiology educator and a biophysicist trained as an electrical engineer, interfaced to a course of approximately 15 students from engineering and biology backgrounds. The result is the powerful freeware data acquisition and analysis environment, "g-PRIME." The software was developed from week to week in response to curriculum demands, and student feedback. The program evolved from a simple software oscilloscope, enabling RC circuit analysis, to a suite of tools supporting analysis of neuronal excitability and synaptic transmission analysis in invertebrate model systems. The program has subsequently expanded in application to university courses, research, and high school projects in the US and abroad as free courseware.

  14. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE), Version 5.0: Models and Results Database (MAR-D) reference manual. Volume 8

    International Nuclear Information System (INIS)

    Russell, K.D.; Skinner, N.L.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The primary function of MAR-D is to create a data repository for completed PRAs and Individual Plant Examinations (IPEs) by providing input, conversion, and output capabilities for data used by IRRAS, SARA, SETS, and FRANTIC software. As probabilistic risk assessments and individual plant examinations are submitted to the NRC for review, MAR-D can be used to convert the models and results from the study for use with IRRAS and SARA. Then, these data can be easily accessed by future studies and will be in a form that will enhance the analysis process. This reference manual provides an overview of the functions available within MAR-D and step-by-step operating instructions

  15. Theoretical and hands-on guidance from dental hygienists promotes good oral health in elderly people living in nursing homes, a pilot study.

    Science.gov (United States)

    Seleskog, B; Lindqvist, L; Wårdh, I; Engström, A; von Bültzingslöwen, I

    2018-04-12

    Oral health in nursing homes for elderly is often unsatisfactory, and oral health education to nursing staff has not shown sufficient results why there is need for novel approaches. The aim of the study was to trial a new oral healthcare educational programme and to evaluate the effects on residents' oral health. In addition, attitudes among the nursing staff in the intervention nursing home were explored. In a controlled clinical trial, two comparable nursing homes were randomly assigned for intervention or control. Interventions included weekly theoretical and hands-on guidance from dental hygienists on oral hygiene procedures and discussions on oral care routines. The residents' oral health, measured by the Revised Oral Assessment Guide (ROAG), dental plaque and gingival bleeding were evaluated at baseline and after 3 months. Attitudes among the staff to oral health care were measured at the intervention nursing home. Revised Oral Assessment Guide gums and lips scores showed a tendency to decrease in the intervention group, but remained high in the control group. Plaque levels improved significantly after intervention, and a trend towards less gingival bleeding was observed. The intervention nursing staff seemed to be more aware of their own limitations concerning oral health care after intervention and valued more frequent contact with dental services to a greater extent. The oral healthcare situation for elderly people today is so complex that theoretical education at the group level regarding different aspects of oral health is not sufficient. Individual hands-on guidance by dental hygienists on a regular basis in everyday care may be a new approach. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. The University of Texas Institute for Geophysics' Marine Geology and Geophysics Field Course: A Hand-On Education Approach to Applied Geophysics

    Science.gov (United States)

    Davis, M. B.; Goff, J.; Gulick, S. P. S.; Fernandez, R.; Duncan, D.; Saustrup, S.

    2016-12-01

    The University of Texas Institute for Geophysics, Jackson School of Geosciences, offers a 3-week marine geology and geophysics field course. The course provides hands-on instruction and training for graduate and upper-level undergraduate students in high-resolution seismic reflection, CHIRP sub-bottom profiling, multibeam bathymetry, sidescan sonar, and sediment sampling and analysis. Students first participate in 3 days of classroom instruction designed to communicate geological context of the field area along with theoretical and technical background on each field method. The class then travels to the Gulf Coast for a week of at-sea field work at locations that provide an opportunity to investigate coastal and continental shelf processes. Teams of students rotate between UTIG's 26' R/V Scott Petty and NOAA's 82' R/V Manta. They assist with survey design, instrumentation set up, and learn about acquisition, quality control, and safe instrument deployment. Teams also process data and analyze samples in onshore field labs. During the final week teams integrate, interpret, and visualize data in a final project using industry-standard software. The course concludes with team presentations on their interpretations with academic and industry supporters. Students report a greater understanding of marine geology and geophysics through the course's intensive, hands-on, team approach and high instructor/student ratio (sixteen students, three faculty, and three teaching assistants). Post-class, students may incorporate course data in senior honors or graduate thesis and are encouraged to publish and present results at national meetings. This course (to our knowledge) remains the only one of its kind, satisfies field experience requirements for some degree programs, and provides an alternative to land-based field courses. Alumni note the course's applicability to energy, environmental, and geotechnical industries as well as coastal restoration/management fields.

  17. Comparing the Pre- and Posttest Scores in Relations to the Emporium and the Hands-on Instructional Approaches of Teaching Science in Prekindergarten

    Science.gov (United States)

    Headen, Patricia Ann

    This quantitative, quasi-experimental research investigated if two instructional approaches, the Emporium Computer-Based (Group 2) versus the hands-on approach (Group 1), resulted any difference in student achievement in science for four-year-old prekindergarten students at a private childcare facility in North Carolina. Three research questions hypothesized these relationships: (a) Group 2 versus Group 1 assessed student achievement as theoretically based on Piaget and Vygotsky's perspectives of child development, (b) the instructional approaches related to gender, and (c) the instructional approaches interrelated to ethnicity. Using a two-factor ANOVA and ANCOVA techniques, involved a convenience sample of 126 four-year-old prekindergarten students of which a convenience sample of 126 participated. The Assessment of Measurements for Pre-K (AMP-K), pretest and posttest scores of each group of 63 students measured student achievement. The t tests determined if a significant difference in student achievement existed (dependent variable) with the Emporium Computer-Based versus hands-on instructional approaches (independent variables). The posttest scores of Group 2 (p = 0.00), indicated a significant difference in student achievement. However, gender and ethnicity variables had no effect on student achievement, male (M = 36.14, SD = 19.61) and female (M = 42.91, SD = 18.99) with (p = 0.49), and ethnicity resulted, F (1,125) = 1.65, (p = 0.20). These results suggested that further research on the Emporium Computer-Based instructional approach could improve students' intellectual abilities through more innovative practices.

  18. Perceived Barriers to the Use of High-Fidelity Hands-On Simulation Training for Contrast Reaction Management: Why Programs are Not Using It.

    Science.gov (United States)

    Chinnugounder, Sankar; Hippe, Daniel S; Maximin, Suresh; O'Malley, Ryan B; Wang, Carolyn L

    2015-01-01

    Although subjective and objective benefits of high-fidelity simulation have been reported in medicine, there has been slow adoption in radiology. The purpose of our study was to identify the perceived barriers in the use of high-fidelity hands-on simulation for contrast reaction management training. An IRB exempt 32 questions online web survey was sent to 179 non-military radiology residency program directors listed in the Fellowship and Residency Electronic Interactive Database Access system (FREIDA). Survey questions included the type of contrast reaction management training, cost, time commitment of residents and faculty, and the reasons for not using simulation training. Responses from the survey were summarized as count (percentage), mean ± standard deviation (SD), or median (range). 84 (47%) of 179 programs responded, of which 88% offered CRM training. Most (72%) conducted the CRM training annually while only 4% conducted it more frequently. Didactic lecture was the most frequently used training modality (97%), followed by HFS (30%) and computer-based simulation (CBS) (19%); 5.5% used both HFS and CBS. Of the 51 programs that offer CRM training but do not use HFS, the most common reason reported was insufficient availability (41%). Other reported reasons included cost (33%), no access to simulation centers (33%), lack of trained faculty (27%) and time constraints (27%). Although high-fidelity hands-on simulation training is the best way to reproduce real-life contrast reaction scenarios, many institutions do not provide this training due to constraints such as cost, lack of access or insufficient availability of simulation labs, and lack of trained faculty. As a specialty, radiology needs to better address these barriers at both an institutional and national level. Copyright © 2015 Mosby, Inc. All rights reserved.

  19. Performance Accuracy of Hand-on-needle versus Hand-onsyringe Technique for Ultrasound-guided Regional Anesthesia Simulation for Emergency Medicine Residents

    Directory of Open Access Journals (Sweden)

    Brian Johnson

    2014-09-01

    Full Text Available Introduction: Ultrasound-guided nerve blocks (UGNB are increasingly used in emergency care. The hand-on-syringe (HS needle technique is ideally suited to the emergency department setting because it allows a single operator to perform the block without assistance. The HS technique is assumed to provide less exact needle control than the alternative two-operator hand-on-needle (HN technique; however this assumption has never been directly tested. The primary objective of this study was to compare accuracy of needle targeting under ultrasound guidance by emergency medicine (EM residents using HN and HS techniques on a standardized gelatinous simulation model. Methods: This prospective, randomized study evaluated task performance. We compared needle targeting accuracy using the HN and HS techniques. Each participant performed a set of structured needling maneuvers (both simple and difficult on a standardized partial-task simulator. We evaluated time to task completion, needle visualization during advancement, and accuracy of needle tip at targeting. Resident technique preference was assessed using a post-task survey. Results: We evaluated 60 tasks performed by 10 EM residents. There was no significant difference in time to complete the simple model (HN vs. HS, 18 seconds vs. 18 seconds, p=0.93, time to complete the difficult model (HN vs. HS, 56 seconds vs. 50 seconds, p=0.63, needle visualization, or needle tip targeting accuracy. Most residents (60% preferred the HS technique. Conclusion: For EM residents learning UGNBs, the HN technique was not associated with superior needle control. Our results suggest that the single-operator HS technique provides equivalent needle control when compared to the two-operator HN technique. [West J Emerg Med. 2014;15(6:641–646

  20. A Hands-on Approach to Teaching Geophysics through the University of Texas Institute for Geophysics Marine Geology and Geophysics Field Course in the Gulf of Mexico.

    Science.gov (United States)

    Duncan, D.; Davis, M. B.; Goff, J.; Gulick, S. P. S.; Fernandez-Vasquez, R. A.; Saustrup, S.

    2017-12-01

    The three week field course is offered to graduate and upper-level undergraduate students as hands-on instruction and training for marine geology and geophysics applications. Instructors provide theoretical and technical background of high-resolution seismic reflection, CHIRP sub-bottom profiling, multibeam bathymetry, sidescan sonar, sediment coring, grab sampling, and the sedimentology of resulting seabed samples in the initial phase of the course. The class then travels to the Gulf Coast for a week of at-sea field work. Over the last 10 years, field sites at Freeport, Port Aransas, and Galveston, TX, and Grand Isle, LA, have provided ideal locations for students to explore and investigate coastal and continental shelf processes through the application of geophysical techniques. Students with various backgrounds work in teams of four and rotate between two marine vessels: the R/V Scott Petty, a 26' vessel owned and operated by UTIG, and the R/V Manta, an 82' vessel owned and operated by NOAA. They assist with survey design, instrumentation setup and breakdown, data acquisition, trouble-shooting, data quality control, and safe instrumentation deployment and recovery. Teams also process data and sediment samples in an onshore field lab. During the final week, students visualize, integrate and interpret data for a final project using industry software. The course concludes with final presentations and discussions wherein students examine Gulf Coast geological history and sedimentary processes with academic and industry supporters. Students report a greater understanding of marine geology and geophysics through the course's intensive, hands-on, team approach and low instructor to student ratio (sixteen students, three faculty, and three teaching assistants). Post-class, students may incorporate course data in senior honors or graduate thesis and are encouraged to publish and present results at national meetings. This course satisfies field experience requirements for

  1. Teaching chemistry and other sciences to blind and low-vision students through hands-on learning experiences in high school science laboratories

    Science.gov (United States)

    Supalo, Cary Alan

    2010-11-01

    Students with blindness and low vision (BLV) have traditionally been underrepresented in the sciences as a result of technological and attitudinal barriers to equal access in science laboratory classrooms. The Independent Laboratory Access for the Blind (ILAB) project developed and evaluated a suite of talking and audible hardware/software tools to empower students with BLV to have multisensory, hands-on laboratory learning experiences. This dissertation focuses on the first year of ILAB tool testing in mainstream science laboratory classrooms, and comprises a detailed multi-case study of four students with BLV who were enrolled in high school science classes during 2007--08 alongside sighted students. Participants attended different schools; curricula included chemistry, AP chemistry, and AP physics. The ILAB tools were designed to provide multisensory means for students with BLV to make observations and collect data during standard laboratory lessons on an equivalent basis with their sighted peers. Various qualitative and quantitative data collection instruments were used to determine whether the hands-on experiences facilitated by the ILAB tools had led to increased involvement in laboratory-goal-directed actions, greater peer acceptance in the students' lab groups, improved attitudes toward science, and increased interest in science. Premier among the ILAB tools was the JAWS/Logger Pro software interface, which made audible all information gathered through standard Vernier laboratory probes and visually displayed through Logger Pro. ILAB tools also included a talking balance, a submersible audible light sensor, a scientific talking stopwatch, and a variety of other high-tech and low-tech devices and techniques. While results were mixed, all four participating BLV students seemed to have experienced at least some benefit, with the effect being stronger for some than for others. Not all of the data collection instruments were found to reveal improvements for all

  2. Systems analysis programs for Hands-on integrated reliability evaluations (SAPHIRE) Version 5.0: Verification and validation (V ampersand V) manual. Volume 9

    International Nuclear Information System (INIS)

    Jones, J.L.; Calley, M.B.; Capps, E.L.; Zeigler, S.L.; Galyean, W.J.; Novack, S.D.; Smith, C.L.; Wolfram, L.M.

    1995-03-01

    A verification and validation (V ampersand V) process has been performed for the System Analysis Programs for Hands-on Integrated Reliability Evaluation (SAPHIRE) Version 5.0. SAPHIRE is a set of four computer programs that NRC developed for performing probabilistic risk assessments. They allow an analyst to perform many of the functions necessary to create, quantify, and evaluate the risk associated with a facility or process being analyzed. The programs are Integrated Reliability and Risk Analysis System (IRRAS) System Analysis and Risk Assessment (SARA), Models And Results Database (MAR-D), and Fault tree, Event tree, and Piping and instrumentation diagram (FEP) graphical editor. Intent of this program is to perform a V ampersand V of successive versions of SAPHIRE. Previous efforts have been the V ampersand V of SAPHIRE Version 4.0. The SAPHIRE 5.0 V ampersand V plan is based on the SAPHIRE 4.0 V ampersand V plan with revisions to incorporate lessons learned from the previous effort. Also, the SAPHIRE 5.0 vital and nonvital test procedures are based on the test procedures from SAPHIRE 4.0 with revisions to include the new SAPHIRE 5.0 features as well as to incorporate lessons learned from the previous effort. Most results from the testing were acceptable; however, some discrepancies between expected code operation and actual code operation were identified. Modifications made to SAPHIRE are identified

  3. Alzheimer's Association Quality Care Campaign and professional training initiatives: improving hands-on care for people with dementia in the U.S.A.

    Science.gov (United States)

    Gould, Elizabeth; Reed, Peter

    2009-04-01

    In the U.S.A., direct care workers and licensed practical nurses are the professionals who provide the most hands-on care to people with dementia in nursing homes and residential care facilities--yet they do not receive adequate training in dementia care. Dementia care training needs to be universal with all disciplines at all levels of care. Even though there is variability on recommended hours and content, most studies emphasize the importance of dementia care training as a distinct component of required training for any professional or paraprofessional working in long-term care. In 2005, the Alzheimer's Association launched its Quality Care Campaign to improve dementia care through state and federal advocacy; consumer education and empowerment; and staff training. This paper describes the effectiveness of Alzheimer's Association training as measured by knowledge gained and providers' intention to change their behavior immediately after attending the training.Overall, findings indicated that the participants responded positively to evidence-based training in dementia care that emphasized the importance of (i) leadership, (ii) team communication and collaboration, (iii) support and empowerment of direct care staff, (iv) awareness and practice of specific dementia care issues, (v) resident and family involvement in care, and (vi) professional self-care.

  4. Optics and optronics in university courses for officers of the Federal Armed Forces - special curricula and hands-on lessons vs. academic requirements

    Science.gov (United States)

    Hahlweg, Cornelius; Rothe, Hendrik

    2016-09-01

    For more than two decades lessons in optics, digital image processing and optronics are compulsory optional subjects and as such integral parts of the courses in mechanical engineering at the University of the Federal Armed Forces in Hamburg. They are provided by the Chair for Measurement and Information Technology. Historically, the curricula started as typical basic lessons in optics and digital image processing and related sensors. Practical sessions originally concentrated on image processing procedures in Pascal, C and later Matlab. They evolved into a broad portfolio of practical hands-on lessons in lab and field, including high-tech and especially military equipment, but also homemaker style primitive experiments, of which the paper will give a methodical overview. A special topic - as always with optics in education - is the introduction to the various levels of abstraction in conjunction with the highly complex and wide-ranging matter squeezed into only two trimesters - instead of semesters at civil universities - for an audience being subject to strains from both study and duty. The talk will be accompanied by striking multi-media material, which will be also part of the multi-media attachment of the paper.

  5. Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE), Version 5.0: Integrated Reliability and Risk Analysis System (IRRAS) reference manual. Volume 2

    International Nuclear Information System (INIS)

    Russell, K.D.; Kvarfordt, K.J.; Skinner, N.L.; Wood, S.T.; Rasmuson, D.M.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The Integrated Reliability and Risk Analysis System (IRRAS) is a state-of-the-art, microcomputer-based probabilistic risk assessment (PRA) model development and analysis tool to address key nuclear plant safety issues. IRRAS is an integrated software tool that gives the use the ability to create and analyze fault trees and accident sequences using a microcomputer. This program provides functions that range from graphical fault tree construction to cut set generation and quantification to report generation. Version 1.0 of the IRRAS program was released in February of 1987. Since then, many user comments and enhancements have been incorporated into the program providing a much more powerful and user-friendly system. This version has been designated IRRAS 5.0 and is the subject of this Reference Manual. Version 5.0 of IRRAS provides the same capabilities as earlier versions and ads the ability to perform location transformations, seismic analysis, and provides enhancements to the user interface as well as improved algorithm performance. Additionally, version 5.0 contains new alphanumeric fault tree and event used for event tree rules, recovery rules, and end state partitioning

  6. Active Math Learning

    DEFF Research Database (Denmark)

    The presentation is concerned with general course planning philosophy and a specific case study (boomerang flight geometro-dynamics) for active learning of mathematics via computer assisted and hands-on unfolding of first principles - in this case the understanding of rotations and Eulers equatio...

  7. Model PET Scan Activity

    Science.gov (United States)

    Strunk, Amber; Gazdovich, Jennifer; Redouté, Oriane; Reverte, Juan Manuel; Shelley, Samantha; Todorova, Vesela

    2018-05-01

    This paper provides a brief introduction to antimatter and how it, along with other modern physics topics, is utilized in positron emission tomography (PET) scans. It further describes a hands-on activity for students to help them gain an understanding of how PET scans assist in detecting cancer. Modern physics topics provide an exciting way to introduce students to current applications of physics.

  8. Improvement of skills and knowledge by a hands-on cardiac CT course. Before and after evaluation with a validated questionnaire and self-assessment

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, E.; Germershausen, C.; Greupner, J.; Schnapauff, D.; Rief, M.; Grigoryev, M.; Wollenberg, U.; Dewey, Marc [Inst. fuer Radiologie, Charite-Univ. Berlin (Germany)

    2010-07-15

    Purpose: cardiac computed tomography (CT) is becoming increasingly important in noninvasive imaging. To meet this demand, there are a growing number of short training courses for cardiac CT. Whether such courses improve the knowledge and skills of participants is not known. Materials and methods: the concept of a two-day cardiac CT course consisting of introductory lectures, live patient examinations, and hands-on exercises for interpreting cardiac CT scans on workstations was analyzed using participant evaluations (scales from 1 = excellent to 6 = very poor). Participants rated their increase in knowledge and completed a validated questionnaire with 20 questions. Results: a total of 102 participants attended the courses. There were significant differences in the number of correctly answered test questions between cardiac CT experts and participants at the beginning of the course (91.5 {+-} 6.3% vs. 62.4 {+-} 16.1% p < 0.001). The number of questions answered correctly by the participants increased significantly after completion of the course (mean increase of 4 correctly answered questions, 81.8 {+-} 11.4%. vs. 62.4 {+-} 16.1% p < 0.001). This objective increase in knowledge was in good agreement with participant self-assessments (76.4 {+-} 12.6% vs. 81.8 {+-} 11.4%). The quality of the course received good to very good scores, ranging from 1.8 {+-} 0.7 for speed of presentation to 1.4 {+-} 0.5 for lecturer competence. The score for overall course quality was 1.4 {+-} 0.6. Conclusion: A relatively short cardiac CT course can significantly improve the quantifiable knowledge of participants. The overall quality of the course was rated as very good. (orig.)

  9. Educational Experiences in Oceanography through Hands-On Involvement with Surface Drifters: an Introduction to Ocean Currents, Engineering, Data Collection, and Computer Science

    Science.gov (United States)

    Anderson, T.

    2015-12-01

    The Northeast Fisheries Science Center's (NEFSC) Student Drifters Program is providing education opportunities for students of all ages. Using GPS-tracked ocean drifters, various educational institutions can provide students with hands-on experience in physical oceanography, engineering, and computer science. In building drifters many high school and undergraduate students may focus on drifter construction, sometimes designing their own drifter or attempting to improve current NEFSC models. While learning basic oceanography younger students can build drifters with the help of an educator and directions available on the studentdrifters.org website. Once drifters are deployed, often by a local mariner or oceanographic partner, drifter tracks can be visualised on maps provided at http://nefsc.noaa.gov/drifter. With the lesson plans available for those interested in computer science, students may download, process, and plot the drifter position data with basic Python code provided. Drifter tracks help students to visualize ocean currents, and also allow them to understand real particle tracking applications such as in search and rescue, oil spill dispersion, larval transport, and the movement of injured sea animals. Additionally, ocean circulation modelers can use student drifter paths to validate their models. The Student Drifters Program has worked with over 100 schools, several of them having deployed drifters on the West Coast. Funding for the program often comes from individual schools and small grants but in the future will preferably come from larger government grants. NSF, Sea-Grant, NOAA, and EPA are all possible sources of funding, especially with the support of multiple schools and large marine education associations. The Student Drifters Program is a unique resource for educators, students, and scientists alike.

  10. Evaluation of radiological workstations and web-browser-based image distribution clients for a PACS project in hands-on workshops

    International Nuclear Information System (INIS)

    Boehm, Thomas; Handgraetinger, Oliver; Voellmy, Daniel R.; Marincek, Borut; Wildermuth, Simon; Link, Juergen; Ploner, Ricardo

    2004-01-01

    The methodology and outcome of a hands-on workshop for the evaluation of PACS (picture archiving and communication system) software for a multihospital PACS project are described. The following radiological workstations and web-browser-based image distribution software clients were evaluated as part of a multistep evaluation of PACS vendors in March 2001: Impax DS 3000 V 4.1/Impax Web1000 (Agfa-Gevaert, Mortsel, Belgium); PathSpeed V 8.0/PathSpeed Web (GE Medical Systems, Milwaukee, Wis., USA); ID Report/ID Web (Image Devices, Idstein, Germany); EasyVision DX/EasyWeb (Philips Medical Systems, Eindhoven, Netherlands); and MagicView 1000 VB33a/MagicWeb (Siemens Medical Systems, Erlangen, Germany). A set of anonymized DICOM test data was provided to enable direct image comparison. Radiologists (n=44) evaluated the radiological workstations and nonradiologists (n=53) evaluated the image distribution software clients using different questionnaires. One vendor was not able to import the provided DICOM data set. Another vendor had problems in displaying imported cross-sectional studies in the correct stack order. Three vendors (Agfa-Gevaert, GE, Philips) presented server-client solutions with web access. Two (Siemens, Image Devices) presented stand-alone solutions. The highest scores in the class of radiological workstations were achieved by ID Report from Image Devices (p<0.005). In the class of image distribution clients, the differences were statistically not significant. Questionnaire-based evaluation was shown to be useful for guaranteeing systematic assessment. The workshop was a great success in raising interest in the PACS project in a large group of future clinical users. The methodology used in the present study may be useful for other hospitals evaluating PACS. (orig.)

  11. Improvement of skills and knowledge by a hands-on cardiac CT course. Before and after evaluation with a validated questionnaire and self-assessment

    International Nuclear Information System (INIS)

    Zimmermann, E.; Germershausen, C.; Greupner, J.; Schnapauff, D.; Rief, M.; Grigoryev, M.; Wollenberg, U.; Dewey, Marc

    2010-01-01

    Purpose: cardiac computed tomography (CT) is becoming increasingly important in noninvasive imaging. To meet this demand, there are a growing number of short training courses for cardiac CT. Whether such courses improve the knowledge and skills of participants is not known. Materials and methods: the concept of a two-day cardiac CT course consisting of introductory lectures, live patient examinations, and hands-on exercises for interpreting cardiac CT scans on workstations was analyzed using participant evaluations (scales from 1 = excellent to 6 = very poor). Participants rated their increase in knowledge and completed a validated questionnaire with 20 questions. Results: a total of 102 participants attended the courses. There were significant differences in the number of correctly answered test questions between cardiac CT experts and participants at the beginning of the course (91.5 ± 6.3% vs. 62.4 ± 16.1% p < 0.001). The number of questions answered correctly by the participants increased significantly after completion of the course (mean increase of 4 correctly answered questions, 81.8 ± 11.4%. vs. 62.4 ± 16.1% p < 0.001). This objective increase in knowledge was in good agreement with participant self-assessments (76.4 ± 12.6% vs. 81.8 ± 11.4%). The quality of the course received good to very good scores, ranging from 1.8 ± 0.7 for speed of presentation to 1.4 ± 0.5 for lecturer competence. The score for overall course quality was 1.4 ± 0.6. Conclusion: A relatively short cardiac CT course can significantly improve the quantifiable knowledge of participants. The overall quality of the course was rated as very good. (orig.)

  12. Novel Longitudinal and Propensity Score Matched Analysis of Hands-On Cooking and Nutrition Education versus Traditional Clinical Education among 627 Medical Students

    Directory of Open Access Journals (Sweden)

    Dominique J. Monlezun

    2015-01-01

    Full Text Available Background. Physicians are inadequately equipped to respond to the global obesity and nutrition-associated chronic disease epidemics. We investigated superiority of simulation-based medical education with deliberate practice (SBME-DP hands-on cooking and nutrition elective in a medical school-based teaching kitchen versus traditional clinical education for medical students. Materials and Methods. A 59-question panel survey was distributed to an entire medical school twice annually from September 2012 to May 2014. Student diet and attitudes and competencies (DACs counseling patients on nutrition were compared using conditional multivariate logistic regression, propensity score-weighted, and longitudinal panel analyses. Inverse-variance weighted meta-analysis (IVWM was used for planned subgroup analysis by year and treatment estimates across the three methods. Results. Of the available 954 students, 65.72% (n=627 unique students were followed to produce 963 responses. 11.32% (n=109 of responses were from 84 subjects who participated in the elective. SBME-DP versus traditional education significantly improved fruit and vegetable diet (OR = 1.38, 95% CI: 1.07–1.79, p=0.013 and attitudes (OR = 1.81, 95% CI: 1.40–2.35, p<0.001 and competencies (OR = 1.72, 95% CI: 1.54–1.92, p<0.001. Conclusions. This study reports for the first time superiority longitudinally for SBME-DP style nutrition education for medical students which has since expanded to 13 schools.

  13. Effectiveness of hands-on tutoring and guided self-directed learning versus self-directed learning alone to educate critical care fellows on mechanical ventilation - a pilot project.

    Science.gov (United States)

    Ramar, Kannan; De Moraes, Alice Gallo; Selim, Bernardo; Holets, Steven; Oeckler, Richard

    2016-01-01

    Physicians require extensive training to achieve proficiency in mechanical ventilator (MV) management of the critically ill patients. Guided self-directed learning (GSDL) is usually the method used to learn. However, it is unclear if this is the most proficient approach to teaching mechanical ventilation to critical care fellows. We, therefore, investigated whether critical care fellows achieve higher scores on standardized testing and report higher satisfaction after participating in a hands-on tutorial combined with GSDL compared to self-directed learning alone. First-year Pulmonary and Critical Care Medicine (PCCM) fellows ( n =6) and Critical Care Internal Medicine (CCIM) ( n =8) fellows participated. Satisfaction was assessed using the Likert scale. MV knowledge assessment was performed by administering a standardized 25-question multiple choice pre- and posttest. For 2 weeks the CCIM fellows were exposed to GSDL, while the PCCM fellows received hands-on tutoring combined with GSDL. Ninety-three percentage (6 PCCM and 7 CCIM fellows, total of 13 fellows) completed all evaluations and were included in the final analysis. CCIM and PCCM fellows scored similarly in the pretest (64% vs. 52%, p =0.13). Following interventions, the posttest scores increased in both groups. However, no significant difference was observed based on the interventions (74% vs. 77%, p =0.39). The absolute improvement with the hands-on-tutoring and GSDL group was higher than GSDL alone (25% vs. 10%, p =0.07). Improved satisfaction scores were noted with hands-on tutoring. Hands-on tutoring combined with GSDL and GSDL alone were both associated with an improvement in posttest scores. Absolute improvement in test and satisfaction scores both trended higher in the hands-on tutorial group combined with GSDL group.

  14. Effectiveness of hands-on tutoring and guided self-directed learning versus self-directed learning alone to educate critical care fellows on mechanical ventilation – a pilot project

    Directory of Open Access Journals (Sweden)

    Kannan Ramar

    2016-09-01

    Full Text Available Background: Physicians require extensive training to achieve proficiency in mechanical ventilator (MV management of the critically ill patients. Guided self-directed learning (GSDL is usually the method used to learn. However, it is unclear if this is the most proficient approach to teaching mechanical ventilation to critical care fellows. We, therefore, investigated whether critical care fellows achieve higher scores on standardized testing and report higher satisfaction after participating in a hands-on tutorial combined with GSDL compared to self-directed learning alone. Methods: First-year Pulmonary and Critical Care Medicine (PCCM fellows (n=6 and Critical Care Internal Medicine (CCIM (n=8 fellows participated. Satisfaction was assessed using the Likert scale. MV knowledge assessment was performed by administering a standardized 25-question multiple choice pre- and posttest. For 2 weeks the CCIM fellows were exposed to GSDL, while the PCCM fellows received hands-on tutoring combined with GSDL. Results: Ninety-three percentage (6 PCCM and 7 CCIM fellows, total of 13 fellows completed all evaluations and were included in the final analysis. CCIM and PCCM fellows scored similarly in the pretest (64% vs. 52%, p=0.13. Following interventions, the posttest scores increased in both groups. However, no significant difference was observed based on the interventions (74% vs. 77%, p=0.39. The absolute improvement with the hands-on-tutoring and GSDL group was higher than GSDL alone (25% vs. 10%, p=0.07. Improved satisfaction scores were noted with hands-on tutoring. Conclusions: Hands-on tutoring combined with GSDL and GSDL alone were both associated with an improvement in posttest scores. Absolute improvement in test and satisfaction scores both trended higher in the hands-on tutorial group combined with GSDL group.

  15. Rationale and study protocol of the EASY Minds (Encouraging Activity to Stimulate Young Minds) program: cluster randomized controlled trial of a primary school-based physical activity integration program for mathematics

    OpenAIRE

    Riley, Nicholas; Lubans, David R; Holmes, Kathryn; Morgan, Philip J

    2014-01-01

    Background Novel strategies are required to increase school-based physical activity levels of children. Integrating physical activity in mathematics lessons may lead to improvements in students’ physical activity levels as well as enjoyment, engagement and learning. The primary aim of this study is to evaluate the impact of a curriculum-based physical activity integration program known as EASY Minds (Encouraging Activity to Stimulate Young Minds) on children’s daily school time physical activ...

  16. Blender Bikes: Blending Nutrition and Physical Activity

    Science.gov (United States)

    Ferrari, Theresa M.; Smathers, Carol A.

    2018-01-01

    Many Americans do not meet the recommendations for diet and physical activity. A blender bike can be an effective tool when coupled with hands-on activities that reinforce health recommendations. We created "Blending Nutrition and Physical Activity: An Activity Guide for Use with Blender Bikes" to use when incorporating a blender bike…

  17. Hands-on Approach to Prepare Specialists in Climate Changes Modeling and Analysis Using an Information-Computational Web-GIS Portal "Climate"

    Science.gov (United States)

    Shulgina, T. M.; Gordova, Y. E.; Martynova, Y. V.

    2014-12-01

    A problem of making education relevant to the workplace tasks is a key problem of higher education in the professional field of environmental sciences. To answer this challenge several new courses for students of "Climatology" and "Meteorology" specialties were developed and implemented at the Tomsk State University, which comprises theoretical knowledge from up-to-date environmental sciences with computational tasks. To organize the educational process we use an open-source course management system Moodle (www.moodle.org). It gave us an opportunity to combine text and multimedia in a theoretical part of educational courses. The hands-on approach is realized through development of innovative trainings which are performed within the information-computational web GIS platform "Climate" (http://climate.scert.ru/). The platform has a set of tools and data bases allowing a researcher to perform climate changes analysis on the selected territory. The tools are also used for students' trainings, which contain practical tasks on climate modeling and climate changes assessment and analysis. Laboratory exercises are covering three topics: "Analysis of regional climate changes"; "Analysis of climate extreme indices on the regional scale"; and "Analysis of future climate". They designed to consolidate students' knowledge of discipline, to instill in them the skills to work independently with large amounts of geophysical data using modern processing and analysis tools of web-GIS platform "Climate" and to train them to present results obtained on laboratory work as reports with the statement of the problem, the results of calculations and logically justified conclusion. Thus, students are engaged in n the use of modern tools of the geophysical data analysis and it cultivates dynamic of their professional learning. The approach can help us to fill in this gap because it is the only approach that offers experience, increases students involvement, advance the use of modern

  18. Putting teachers-to-be in the field and the lab: Hands-on research at the American Museum of Natural History

    Science.gov (United States)

    Nadeau, P. A.; Ebel, D. S.; Harlow, G. E.; Landman, N. H.; Pagnotta, A.; Sessa, J.; Shara, M.; Ustunisik, G. K.; Webster, J. D.; Blair, D.; Shumer, M.

    2013-12-01

    The American Museum of Natural History (AMNH) is halfway through a pilot program designed to prepare Earth Science teachers for grades 7-12 in high-needs schools in New York. The program was implemented to address a critical shortage of qualified Earth Science teachers throughout the state as well as to reach student populations that traditionally have limited science exposure and hands-on learning opportunities. This Master of Arts in Teaching is unique amongst teacher preparation programs, not only in that it is housed at a world-class research museum and places the teacher candidates in a year-long teaching residency, but also in that it accepts only students with a strong background in Earth Science via a degree in geology, meteorology, oceanography, astronomy, or a related discipline. Following a year of graduate courses in science and pedagogy, as well as teaching residencies, and only months before embarking on teaching career, candidates begin a seven-week science practicum. This exercise combines field and lab work under the tutelage of AMNH science curators and postdoctoral research fellows to provide experience with the scientific process, from field work and data collection to interpretation and public presentation of results. In the science practicum, teaching candidates begin by selecting one of four topics on which to focus their research: astrophysics, experimental petrology, mineralogy, or paleontology. An introduction to lab materials, techniques, and instrumentation is followed by two weeks in the field, both upstate and in New York City, where rocks of all types are encountered and discussed. Nights are devoted to astronomical observing and data collection to supplement the geology-oriented daytime sessions. Following the trips, candidates are back at AMNH analyzing data and samples in preparation for a short, scientific-style manuscript and presentation of results in an AGU-style talk. Three research groups have already discovered potentially

  19. The Quest for Less: Activities and Resources for Teaching K-8

    Science.gov (United States)

    The Quest for Less provides hands-on lessons and activities, enrichment ideas, journal writing assignments, and other educational tools related to preventing and reusing waste. This document includes factsheets, activities, and teaching notes for 6-8

  20. The effect of isometric exercise of the hand on the synovial blood flow in patients with rheumatoid arthritis measured by color Doppler ultrasound

    DEFF Research Database (Denmark)

    Ellegaard, Karen; Torp-Pedersen, Søren; Lund, Hans

    2013-01-01

    made it possible to investigate the direct effect on blood supply in the synovium after training. In this case-control study, 24 patients with RA with USD activity in the wrist joint participated. The USD activity was measured by the color fraction (CF) (CF = colored pixels/total number of pixels...

  1. Teach CAD and Measuring Skills through Reverse Engineering

    Science.gov (United States)

    Board, Keith

    2012-01-01

    This article describes a reverse engineering activity that gives students hands-on, minds-on experience with measuring tools, machine parts, and CAD. The author developed this activity to give students an abundance of practical experience with measuring tools. Equally important, it provides a good interface between the virtual world of CAD 3D…

  2. Benchmarks for enhanced network performance: hands-on testing of operating system solutions to identify the optimal application server platform for the Graduate School of Business and Public Policy

    OpenAIRE

    Burman, Rex; Coca, Anthony R.

    2010-01-01

    MBA Professional Report With the release of next generation operating systems, network managers face the prospect of upgrading their systems based on the assumption that "newer is better". The Graduate School of Business and Public Policy is in the process of upgrading their network application server and one of the most important decisions to be made is which Server Operating System to use. Based on hands-on benchmark tests and analysis we aim to assist the GSBPP by providing benchma...

  3. [Influence of "prehistory" of sequential movements of the right and the left hand on reproduction: coding of positions, movements and sequence structure].

    Science.gov (United States)

    Bobrova, E V; Liakhovetskiĭ, V A; Borshchevskaia, E R

    2011-01-01

    The dependence of errors during reproduction of a sequence of hand movements without visual feedback on the previous right- and left-hand performance ("prehistory") and on positions in space of sequence elements (random or ordered by the explicit rule) was analyzed. It was shown that the preceding information about the ordered positions of the sequence elements was used during right-hand movements, whereas left-hand movements were performed with involvement of the information about the random sequence. The data testify to a central mechanism of the analysis of spatial structure of sequence elements. This mechanism activates movement coding specific for the left hemisphere (vector coding) in case of an ordered sequence structure and positional coding specific for the right hemisphere in case of a random sequence structure.

  4. SU-A-BRA-03: Creative Stimulation: A Flexible Hands-On Approach to Building a Deeper Understanding of Critical Concepts in Radiation Physics

    International Nuclear Information System (INIS)

    Naqvi, S.

    2016-01-01

    Vic Montemayor - No one has been more passionate about improving the quality and effectiveness of the teaching of Medical Physics than Bill Hendee. It was in August of 2008 that the first AAPM Workshop on Becoming a Better Teacher of Medical Physics was held, organized and run by Bill Hendee. This was followed up in July of 2010 with a summer school on the same topic, again organized by Bill. There has been continued interest in alternate approaches to teaching medical physics since those initial gatherings. The momentum established by these workshops is made clear each year in the annual Innovation in Medical Physics Education session, which highlights work being done in all forms of medical physics education, from one-on-one residencies or classroom presentations to large-scale program revisions and on-line resources for international audiences. This symposium, presented on behalf of the Education Council, highlights the work of three finalists from past Innovation in Education sessions. Each will be presenting their approaches to and innovations in teaching medical physics. It is hoped that audience members interested in trying something new in their teaching of medical physics will find some of these ideas and approaches readily applicable to their own classrooms. Rebecca Howell - The presentation will discuss ways to maximize classroom learning, i.e., increasing the amount of material covered while also enhancing students’ understanding of the broader implications of the course topics. Specifically, the presentation will focus on two teaching methodologies, project based learning and flip learning. These teaching methods will be illustrated using an example of graduate medical physics course where both are used in conjunction with traditional lectures. Additionally, the presentation will focus on our experience implementing these methods including challenges that were overcome. Jay Burmeister - My presentation will discuss the incorporation of active

  5. SU-A-BRA-03: Creative Stimulation: A Flexible Hands-On Approach to Building a Deeper Understanding of Critical Concepts in Radiation Physics

    Energy Technology Data Exchange (ETDEWEB)

    Naqvi, S. [Saint Agnes Cancer Institute, Baltimore, MD (United States)

    2016-06-15

    Vic Montemayor - No one has been more passionate about improving the quality and effectiveness of the teaching of Medical Physics than Bill Hendee. It was in August of 2008 that the first AAPM Workshop on Becoming a Better Teacher of Medical Physics was held, organized and run by Bill Hendee. This was followed up in July of 2010 with a summer school on the same topic, again organized by Bill. There has been continued interest in alternate approaches to teaching medical physics since those initial gatherings. The momentum established by these workshops is made clear each year in the annual Innovation in Medical Physics Education session, which highlights work being done in all forms of medical physics education, from one-on-one residencies or classroom presentations to large-scale program revisions and on-line resources for international audiences. This symposium, presented on behalf of the Education Council, highlights the work of three finalists from past Innovation in Education sessions. Each will be presenting their approaches to and innovations in teaching medical physics. It is hoped that audience members interested in trying something new in their teaching of medical physics will find some of these ideas and approaches readily applicable to their own classrooms. Rebecca Howell - The presentation will discuss ways to maximize classroom learning, i.e., increasing the amount of material covered while also enhancing students’ understanding of the broader implications of the course topics. Specifically, the presentation will focus on two teaching methodologies, project based learning and flip learning. These teaching methods will be illustrated using an example of graduate medical physics course where both are used in conjunction with traditional lectures. Additionally, the presentation will focus on our experience implementing these methods including challenges that were overcome. Jay Burmeister - My presentation will discuss the incorporation of active

  6. Turning Techno-Savvy into Info-Savvy: Authentically Integrating Information Literacy into the College Curriculum

    Science.gov (United States)

    Brown, Cecelia; Murphy, Teri J.; Nanny, Mark

    2003-01-01

    It is no longer effective to provide information literacy instruction that is thought to be "good for" college students, but rather, instruction must focus on the learning styles and preferences of the target population. This case study reports a series of hands-on/minds-on information literacy activities that dissolve student's misconception that…

  7. The Effects of Upper-Limb Training Assisted with an Electromyography-Driven Neuromuscular Electrical Stimulation Robotic Hand on Chronic Stroke

    Directory of Open Access Journals (Sweden)

    Chingyi Nam

    2017-12-01

    Full Text Available BackgroundImpaired hand dexterity is a major disability of the upper limb after stroke. An electromyography (EMG-driven neuromuscular electrical stimulation (NMES robotic hand was designed previously, whereas its rehabilitation effects were not investigated.ObjectivesThis study aims to investigate the rehabilitation effectiveness of the EMG-driven NMES-robotic hand-assisted upper-limb training on persons with chronic stroke.MethodA clinical trial with single-group design was conducted on chronic stroke participants (n = 15 who received 20 sessions of EMG-driven NMES-robotic hand-assisted upper-limb training. The training effects were evaluated by pretraining, posttraining, and 3-month follow-up assessments with the clinical scores of the Fugl-Meyer Assessment (FMA, the Action Research Arm Test (ARAT, the Wolf Motor Function Test, the Motor Functional Independence Measure, and the Modified Ashworth Scale (MAS. Improvements in the muscle coordination across the sessions were investigated by EMG parameters, including EMG activation level and Co-contraction Indexes (CIs of the target muscles in the upper limb.ResultsSignificant improvements in the FMA shoulder/elbow and wrist/hand scores (P < 0.05, the ARAT (P < 0.05, and in the MAS (P < 0.05 were observed after the training and sustained 3 months later. The EMG parameters indicated a significant decrease of the muscle activation level in flexor digitorum (FD and biceps brachii (P < 0.05, as well as a significant reduction of CIs in the muscle pairs of FD and triceps brachii and biceps brachii and triceps brachii (P < 0.05.ConclusionThe upper-limb training integrated with the assistance from the EMG-driven NMES-robotic hand is effective for the improvements of the voluntary motor functions and the muscle coordination in the proximal and distal joints. Furthermore, the motor improvement after the training could be maintained till 3 months later.Trial registration

  8. The Effects of Upper-Limb Training Assisted with an Electromyography-Driven Neuromuscular Electrical Stimulation Robotic Hand on Chronic Stroke.

    Science.gov (United States)

    Nam, Chingyi; Rong, Wei; Li, Waiming; Xie, Yunong; Hu, Xiaoling; Zheng, Yongping

    2017-01-01

    Impaired hand dexterity is a major disability of the upper limb after stroke. An electromyography (EMG)-driven neuromuscular electrical stimulation (NMES) robotic hand was designed previously, whereas its rehabilitation effects were not investigated. This study aims to investigate the rehabilitation effectiveness of the EMG-driven NMES-robotic hand-assisted upper-limb training on persons with chronic stroke. A clinical trial with single-group design was conducted on chronic stroke participants ( n  = 15) who received 20 sessions of EMG-driven NMES-robotic hand-assisted upper-limb training. The training effects were evaluated by pretraining, posttraining, and 3-month follow-up assessments with the clinical scores of the Fugl-Meyer Assessment (FMA), the Action Research Arm Test (ARAT), the Wolf Motor Function Test, the Motor Functional Independence Measure, and the Modified Ashworth Scale (MAS). Improvements in the muscle coordination across the sessions were investigated by EMG parameters, including EMG activation level and Co-contraction Indexes (CIs) of the target muscles in the upper limb. Significant improvements in the FMA shoulder/elbow and wrist/hand scores ( P  < 0.05), the ARAT ( P  < 0.05), and in the MAS ( P  < 0.05) were observed after the training and sustained 3 months later. The EMG parameters indicated a significant decrease of the muscle activation level in flexor digitorum (FD) and biceps brachii ( P  < 0.05), as well as a significant reduction of CIs in the muscle pairs of FD and triceps brachii and biceps brachii and triceps brachii ( P  < 0.05). The upper-limb training integrated with the assistance from the EMG-driven NMES-robotic hand is effective for the improvements of the voluntary motor functions and the muscle coordination in the proximal and distal joints. Furthermore, the motor improvement after the training could be maintained till 3 months later. ClinicalTrials.gov. NCT02117089; date of registration: April

  9. Hands-on 2.0: improving transfer of training via the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) Acquisition of Data for Outcomes and Procedure Transfer (ADOPT) program.

    Science.gov (United States)

    Dort, Jonathan; Trickey, Amber; Paige, John; Schwarz, Erin; Dunkin, Brian

    2017-08-01

    Practicing surgeons commonly learn new procedures and techniques by attending a "hands-on" course, though trainings are often ineffective at promoting subsequent procedure adoption in practice. We describe implementation of a new program with the SAGES All Things Hernia Hands-On Course, Acquisition of Data for Outcomes and Procedure Transfer (ADOPT), which employs standardized, proven teaching techniques, and 1-year mentorship. Attendee confidence and procedure adoption are compared between standard and ADOPT programs. For the pilot ADOPT course implementation, a hands-on course focusing on abdominal wall hernia repair was chosen. ADOPT participants were recruited among enrollees for the standard Hands-On Hernia Course. Enrollment in ADOPT was capped at 10 participants and limited to a 2:1 student-to-faculty ratio, compared to the standard course 22 participants with a 4:1 student-to-faculty ratio. ADOPT mentors interacted with participants through webinars, phone conferences, and continuous email availability throughout the year. All participants were asked to provide pre- and post-course surveys inquiring about the number of targeted hernia procedures performed and related confidence level. Four of 10 ADOPT participants (40%) and six of 22 standard training participants (27%) returned questionnaires. Over the 3 months following the course, ADOPT participants performed more ventral hernia mesh insertion procedures than standard training participants (median 13 vs. 0.5, p = 0.010) and considerably more total combined procedures (median 26 vs. 7, p = 0.054). Compared to standard training, learners who participated in ADOPT reported greater confidence improvements in employing a components separation via an open approach (p = 0.051), and performing an open transversus abdominis release, though the difference did not achieve statistical significance (p = 0.14). These results suggest that the ADOPT program, with standardized and structured teaching

  10. Hess Deep Interactive Lab: Exploring the Structure and Formation of the Oceanic Crust through Hands-On Models and Online Tools

    Science.gov (United States)

    Kurtz, N.; Marks, N.; Cooper, S. K.

    2014-12-01

    Scientific ocean drilling through the International Ocean Discovery Program (IODP) has contributed extensively to our knowledge of Earth systems science. However, many of its methods and discoveries can seem abstract and complicated for students. Collaborations between scientists and educators/artists to create accurate yet engaging demonstrations and activities have been crucial to increasing understanding and stimulating interest in fascinating geological topics. One such collaboration, which came out of Expedition 345 to the Hess Deep Rift, resulted in an interactive lab to explore sampling rocks from the usually inacessible lower oceanic crust, offering an insight into the geological processes that form the structure of the Earth's crust. This Hess Deep Interactive Lab aims to explain several significant discoveries made by oceanic drilling utilizing images of actual thin sections and core samples recovered from IODP expeditions. . Participants can interact with a physical model to learn about the coring and drilling processes, and gain an understanding of seafloor structures. The collaboration of this lab developed as a need to explain fundamental notions of the ocean crust formed at fast-spreading ridges. A complementary interactive online lab can be accessed at www.joidesresolution.org for students to engage further with these concepts. This project explores the relationship between physical and on-line models to further understanding, including what we can learn from the pros and cons of each.

  11. Impact of an Educational Hands-on Project on the Antimicrobial, Antitumor and Anti-Inflammatory Properties of Plants on Portuguese Students’ Awareness, Knowledge, and Competences

    Directory of Open Access Journals (Sweden)

    Maria-Manuel Azevedo

    2015-02-01

    Full Text Available Promoting environmental and health education is crucial to allow students to make conscious decisions based on scientific criteria. The study is based on the outcomes of an Educational Project implemented with Portuguese students and consisted of several activities, exploring pre-existent Scientific Gardens at the School, aiming to investigate the antibacterial, antitumor and anti-inflammatory properties of plant extracts, with posterior incorporation in soaps and creams. A logo and a webpage were also created. The effectiveness of the project was assessed via the application of a questionnaire (pre- and post-test and observations of the participants in terms of engagement and interaction with all individuals involved in the project. This project increased the knowledge about autochthonous plants and the potential medical properties of the corresponding plant extracts and increased the awareness about the correct design of scientific experiments and the importance of the use of experimental models of disease. The students regarded their experiences as exciting and valuable and believed that the project helped to improve their understanding and increase their interest in these subjects and in science in general. This study emphasizes the importance of raising students’ awareness on the valorization of autochthonous plants and exploitation of their medicinal properties.

  12. Active Directory cookbook

    CERN Document Server

    Hunter, Laura

    2008-01-01

    When you need practical hands-on support for Active Directory, the updated edition of this extremely popular Cookbook provides quick solutions to more than 300 common (and uncommon) problems you might encounter when deploying, administering, and automating Microsoft's network directory service. For the third edition, Active Directory expert Laura E. Hunter offers troubleshooting recipes based on valuable input from Windows administrators, in addition to her own experience. You'll find solutions for the Lightweight Directory Access Protocol (LDAP), ADAM (Active Directory Application Mode), m

  13. 不同範例展示及實作經驗對國中生科技創造力的影響 Effects of Exemplars and Hands-on Experiences on Technological Creativity of Junior High School Students

    Directory of Open Access Journals (Sweden)

    張玉山 Yu-Shan Chang

    2009-12-01

    Full Text Available 本研究旨在探討不同創意層級的範例展示及實作經驗對國中生科技創造力的影響。研究方法採用二因子實驗設計之準實驗研究,研究對象為231 位臺北縣國中生活科技課程的學生。主要研究工具為產品創意量表,內容包括整體評分、主題設定、色彩變化、造型變化、材料種類、外加機能、組合方法共七項。研究結果顯示,實作經驗對學生作品的造型設計與外加機能設計,有顯著的創意效果;高級與中級創意成品範例對學生作品的整體評分、主題設定、色彩變化、造型變化及外加機能,都有正面的創意效果;但是在材料種類與組合方法方面,不同創意層級的範例展示及實作經驗會有交互影響。 The purpose of this study was to discuss effects of exemplars and hands-on experiences on technological creativity of junior high school students. A quasi-experimental and two-factor research design was adapted to teaching experiment in Living-Technology curriculum. There were 231 junior high school students in Taipei county participating in this study. A product creativity scale, which included items of holistic view, subject matter, color design, styling design, material diversity, function design, and structure combination, was used to collect data. Results of this study indicated that significant creativity effects on styling design and function design caused by factors of hands-on experiences. Moreover, high creative and medium creative exemplars showed positive effects on holistic view, subject matter, color design, styling design, and function design. Nevertheless, there were interactive effects between hands-on experiences and creative exemplars on material diversity and structure combination.

  14. A passion for hands-on troubleshooting

    Energy Technology Data Exchange (ETDEWEB)

    Tollinsky, N.

    2010-09-01

    This article discussed a state-of-the-art ventilation-on-demand (VOD) system that was installed at Vale's Creighton mine. RFID tracking technology was installed on some 60 pieces of mobile equipment. Instead of the conventional approach of installing tags on mobile equipment and exciters at check points, the tags were mounted in stationary locations while the exciters were hardened for mounting on mobile equipment. This arrangement was found to be more effective. It was also determined that variable frequency tags are not always necessary in VOD deployments; turning fans off and on based on the position of the vehicle was found to work well. The resolution to another VOD challenge associated with load-haul-dump machines was also discussed. These machines typically traverse several ventilation zones while going back and forth from the ore zones. It is impractical for the fans to be turned off or on as a loader proceeds through every zone, which is the normal practice. Instead, the system was programmed to distinguish between a loader and a bolter, ensuring that the fans remain on during the entire load-haul-dump operation. Tracking technology was also used to automatically turn on a water spray system for dust suppression during mucking operations. Wi-Fi and monitors in the cabs allow drivers to pinpoint the location of the trucks ahead of them, which is less cumbersome than radio communication. 1 fig.

  15. Hands-on creativity in Vocational Education

    DEFF Research Database (Denmark)

    Tanggaard, Lene

    and therefore not well suited for VET comprising production, handcraft and industry. In Europe, vocational education schemes are considered the solid base on which almost all kinds of industry and craft depend. If Europe is to retain its innovative capacity, then vocational education, especially the capacity......This presentation poses the question: what conception of the phenomenon of creativity is best suited to the field of vocational education? VET (Vocational Education and Training) aims to prepare people for employment in craft and industry. In this field, there is an ever-growing requirement...... for creativity and innovation. In response, it is my concern that an understanding of creativity be developed with vocational education and training in mind. It is not enough to import models from other areas, where the distinction between ideas and production or creativity and execution is often relatively hazy...

  16. The upper hand on compartment syndrome.

    LENUS (Irish Health Repository)

    Dolan, Roisin T

    2012-11-01

    Metacarpal fractures are common injuries, accounting for approximately 30% to 40% of all hand fractures and with a lifetime incidence of 2.5%. Traditionally regarded as an innocuous injury, metacarpal fractures tend to be associated with successful outcomes after closed reduction and immobilization. Hand compartment syndrome (HCS) is a rare clinical entity with potential devastating consequences in terms of loss of function and quality-of-life outcomes. We discuss the case of a 44-year-old woman presenting with multiple closed metacarpal fractures as a result of low-energy trauma, complicated by acute HCS. We review the presentation, clinical assessment, and optimal surgical management of acute HCS with reference to international literature.

  17. Hands-On Urbanism 1850 – 2012

    DEFF Research Database (Denmark)

    2013-01-01

    challenges. City-dwellers have always found a number of solutions in crisis situations, they are involved in bottom-up urban development. Self-build and selforganisation, settlements and fruit and vegetable gardening lead to other forms of collective cohesion, neighbourliness and fair distribution. Another...... world can be planted, as today’s community gardeners are clearly showing....

  18. Systems analysis programs for hands-on integrated reliability evaluations (SAPHIRE) Version 5.0. Fault tree, event tree, and piping ampersand instrumentation diagram (FEP) editors reference manual: Volume 7

    International Nuclear Information System (INIS)

    McKay, M.K.; Skinner, N.L.; Wood, S.T.

    1994-07-01

    The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) refers to a set of several microcomputer programs that were developed to create and analyze probabilistic risk assessments (PRAs), primarily for nuclear power plants. The Fault Tree, Event Tree, and Piping and Instrumentation Diagram (FEP) editors allow the user to graphically build and edit fault trees, and event trees, and piping and instrumentation diagrams (P and IDs). The software is designed to enable the independent use of the graphical-based editors found in the Integrated Reliability and Risk Assessment System (IRRAS). FEP is comprised of three separate editors (Fault Tree, Event Tree, and Piping and Instrumentation Diagram) and a utility module. This reference manual provides a screen-by-screen guide of the entire FEP System

  19. Perineal injury associated with hands on/hands poised and directed/undirected pushing: A retrospective cross-sectional study of non-operative vaginal births, 2011-2016.

    Science.gov (United States)

    Lee, Nigel; Firmin, Meaghan; Gao, Yu; Kildea, Sue

    2018-07-01

    Clinicians hand position and advised pushing techniques may impact on rates of perineal injury. To assess the association of four techniques used in management of second stage with risk of moderate and severe perineal injury. Retrospective cross-sectional study. A metropolitan maternity hospital and a private maternity hospital in Brisbane, Australia. Term women with singleton, cephalic presentation experiencing a non-operative vaginal birth from January 2011 to December 2016. The research sites perinatal database recorded data on clinicians approach to instructing women during second stage and hand position at birth. Women were identified from matching the inclusion criteria (n = 26,393) then grouped based on combinations of hands-on, hand- poised, directed and undirected pushing. The associations with perineal injury were estimated using odds ratios obtained by multivariate analysis. Primary outcomes were the risk of moderate and severe perineal injury. The significance was set at 0.001. In Nulliparous women there was no difference in the risk of moderate or severe perineal injury between the different techniques. In multiparous women the use of a hands-on/directed approach was associated with a significant increase in the risk of moderate (AOR 1.18, 95% CI 1.10-1.27, p < 0.001) and severe perineal injury (AOR 1.50, 95% CI 1.20-1.88, p < 0.001) compared to hands-poised/undirected. A hands poised/undirected approach could be utilised in strategies for the prevention of moderate and severe perineal injury. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Assessing High School Student Learning on Science Outreach Lab Activities

    Science.gov (United States)

    Thomas, Courtney L.

    2012-01-01

    The effect of hands-on laboratory activities on secondary student learning was examined. Assessment was conducted over a two-year period, with 262 students participating the first year and 264 students the second year. Students took a prequiz, performed a laboratory activity (gas chromatography of alcohols, or photosynthesis and respiration), and…

  1. Enhancing Learning Outcomes through Application Driven Activities in Marketing

    Science.gov (United States)

    Stegemann, Nicole; Sutton-Brady, Catherine

    2013-01-01

    This paper introduces an activity used in class to allow students to apply previously acquired information to a hands-on task. As the authors have previously shown active learning is a way to effectively facilitate and improve students' learning outcomes. As a result to improve learning outcomes we have overtime developed a series of learning…

  2. "JCE" Classroom Activity #111: Redox Reactions in Three Representations

    Science.gov (United States)

    Nieves, Edgardo L. Ortiz; Barreto, Reizelie; Medina, Zuleika

    2012-01-01

    This activity introduces students to the concept of reduction-oxidation (redox) reactions. To help students obtain a thorough understanding of redox reactions, the concept is explored at three levels: macroscopic, submicroscopic, and symbolic. In this activity, students perform hands-on investigations of the three levels as they work at different…

  3. Lasers. Technology Learning Activity. Teacher Edition. Technology Education Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of laser technology. The guide uses a series of hands-on exploratory experiences into which activities to help students develop…

  4. Motivational Interviewing to Increase Physical Activity in Breast Cancer Survivors

    Science.gov (United States)

    2011-05-01

    impact of physical activity on depressive symptoms, fatigue, and aerobic fitness over time. 4 BODY TRAINING ACCOMPLISHMENTS The SOW outlined 5...not count fruit drinks like Kooi-Aid, lemonade, Hi-C, cranberry juice drink, Tang, and Twister. Include juice you drank at all mealtimes and between...5. I had trouble keeping my mind on what I was D D D D doing 6. I felt depressed D D D D 7. I felt that everything I did was an effort D D D D

  5. Polymer Basics: Classroom Activities Manipulating Paper Clips to Introduce the Structures and Properties of Polymers

    Science.gov (United States)

    Umar, Yunusa

    2014-01-01

    A simple and effective hands-on classroom activity designed to illustrate basic polymer concepts is presented. In this activity, students build primary structures of homopolymers and different arrangements of monomers in copolymer using paper clips as monomers. The activity supports formation of a basic understanding of polymer structures,…

  6. The relation of trait and state mindfulness with satisfaction and physical activity: A cross-sectional study in 305 Dutch participants.

    Science.gov (United States)

    Tsafou, Kalliopi-Eleni; Lacroix, Joyca Pw; van Ee, Raymond; Vinkers, Charlotte Dw; De Ridder, Denise Td

    2017-09-01

    Previous research has shown that satisfaction mediates the relationship of state mindfulness (i.e. during physical activity) with physical activity. This study aimed to replicate this finding and to explore the role of trait mindfulness with a cross-sectional design. In all, 305 participants completed measures on trait and state mindfulness, satisfaction with physical activity, and physical activity. Mediation analyses were used. Satisfaction mediated the effect of state mindfulness on physical activity. Trait mindfulness related to physical activity via an indirect path, namely through two consecutive mediators, first state mindfulness and then satisfaction. Our results suggest that to enhance satisfaction, both state and trait mindfulness should be considered.

  7. Development of Active Learning with Simulations and Games

    Science.gov (United States)

    Zapalska, Alina; Brozik, Dallas; Rudd, Denis

    2012-01-01

    Educational games and simulations are excellent active learning tools that offer students hands-on experience. Little research is available on developing games and simulations and how teachers can be assisted in making their own games and simulations. In this context, the paper presents a multi-step process of how to develop games and simulations…

  8. An Active Learning Exercise for Product Design from an Operations Perspective

    Science.gov (United States)

    Hill, Stephen; Baker, Elizabeth

    2016-01-01

    Product design is a topic that is regularly covered in introductory operations management courses. However, a pedagogical challenge exists related to the presentation of introductory-level product design in a way that promotes active learning. The hands-on exercise presented in this article provides instructors with an activity that gives students…

  9. Elementary Anatomy: Activities Designed to Teach Preschool Children about the Human Body

    Science.gov (United States)

    Raven, Sara

    2016-01-01

    Studies show that children may not be able to conceptualize some of the topics associated with anatomy, including internal organs and involuntary muscles, because the concepts are too abstract and are not easily visualized. Thus, this article presents activities that incorporate a variety of models and hands-on activities designed to provide…

  10. Vliv všímavosti na afektivitu. Fenomenologický výklad buddhistické meditace vipassanā (Influence of mindfulness on affectivity. A phenomenological interpretation of the Buddhist meditation vipassanā

    Directory of Open Access Journals (Sweden)

    Jan Puc

    2016-12-01

    Full Text Available The paper shows connection between the cultivation of attention in Buddhist meditation vipassanā and the phenomenological theory of affectivity. At first, it shortly describes the way how the praxis of meditation achieves progress of mindfulness. Then, this experience is interpreted from the point of view of Husserl’s theory of passive constitution. Finally, it describes mindfulness in terms of the boundary between activity and passivity of human being in the world.

  11. IASS Activity

    Science.gov (United States)

    Hojaev, Alisher S.; Ibragimova, Elvira M.

    2015-08-01

    It’s well known, astronomy in Uzbekistan has ancient roots and traditions (e.g., Mirzo Ulugh Beg, Abū al-Rayhān al-Bīrūnī, Abū ‘Abdallāh al-Khwārizmī) and astronomical heritage carefully preserved. Nowadays uzbek astronomers play a key role in scientific research but also in OAD and Decadal Plan activity in the Central Asia region. International Aerospace School (IASS) is an amazing and wonderful event held annually about 30 years. IASS is unique project in the region, and at the beginning we spent the Summer and Winter Schools. At present in the summer camp we gather about 50 teenage and undergraduate students over the country and abroad (France, Malaysia, Turkey, Azerbaijan, Pakistan, Russia, etc.). They are selected on the basis of tests of astronomy and space issues. During two weeks of IASS camp the invited scientists, cosmonauts and astronauts as well as other specialists give lectures and engage in practical exercises with IASS students in astronomy, including daily observations of the Sun and night sky observations with meniscus telescope, space research and exploration, aerospace modelling, preparation and presentation of original projects. This is important that IASS gives not theoretical grounds only but also practically train the students and the hands-on training is the major aims of IASS. Lectures and practice in the field of astronomy carried out with the direct involvement and generous assistance of Uranoscope Association (Paris, France). The current 26-th IASS is planned to held in July 2015.

  12. Design aspects of low activation fusion ignition experiments

    International Nuclear Information System (INIS)

    Cheng, E.T.; Creedon, R.L.; Hopkins, G.R.; Trester, P.W.; Wong, C.P.C.; Schultz, K.R.

    1986-01-01

    Preliminary design studies have been done exploring (1) materials selection, (2) shutdown biological dose rates, (3) mechanical design and (4) thermal design of a fusion ignition experiment made of low activation materials. From the results of these preliminary design studies it appears that an ignition experiment could be built of low activation materials, and that this design would allow hands-on access for maintenance

  13. Simple Activities for Powerful Impact

    Science.gov (United States)

    LaConte, K.; Shupla, C. B.; Dusenbery, P.; Harold, J. B.; Holland, A.

    2016-12-01

    STEM education is having a transformational impact on libraries across the country. The STAR Library Education Network (STAR_Net) provides free Science-Technology Activities & Resources that are helping libraries to engage their communities in STEM learning experiences. Hear the results of a national 2015 survey of library and STEM professionals and learn what STEM programming is currently in place in public libraries and how libraries approach and implement STEM programs. Experience hands-on space science activities that are being used in library programs with multiple age groups. Through these hands-on activities, learners explore the nature of science and employ science and engineering practices, including developing and using models, planning and carrying out investigations, and engaging in argument from evidence (NGSS Lead States, 2013). Learn how STAR_Net can help you print (free!) mini-exhibits and educator guides. Join STAR_Net's online community and access STEM resources and webinars to work with libraries in your local community.

  14. Web-Based Interactive Video Vignettes Create a Personalized Active Learning Classroom for Introducing Big Ideas in Introductory Biology

    Science.gov (United States)

    Wright, L. Kate; Newman, Dina L.; Cardinale, Jean A.; Teese, Robert

    2016-01-01

    The typical "flipped classroom" delivers lecture material in video format to students outside of class in order to make space for active learning in class. But why give students passive material at all? We are developing a set of high-quality online educational materials that promote active, hands-on science learning to aid in teaching…

  15. Rocks: A Concrete Activity That Introduces Normal Distribution, Sampling Error, Central Limit Theorem and True Score Theory

    Science.gov (United States)

    Van Duzer, Eric

    2011-01-01

    This report introduces a short, hands-on activity that addresses a key challenge in teaching quantitative methods to students who lack confidence or experience with statistical analysis. Used near the beginning of the course, this activity helps students develop an intuitive insight regarding a number of abstract concepts which are key to…

  16. Web-Based Tools for Modelling and Analysis of Multivariate Data: California Ozone Pollution Activity

    Science.gov (United States)

    Dinov, Ivo D.; Christou, Nicolas

    2011-01-01

    This article presents a hands-on web-based activity motivated by the relation between human health and ozone pollution in California. This case study is based on multivariate data collected monthly at 20 locations in California between 1980 and 2006. Several strategies and tools for data interrogation and exploratory data analysis, model fitting…

  17. Fashion Design: Designing a Learner-Active, Multi-Level High School Course

    Science.gov (United States)

    Nelson, Diane

    2009-01-01

    A high school fashion design teacher has much in common with the ringmaster of a three-ring circus. The challenges of teaching a hands-on course are to facilitate the entire class and to meet the needs of individual students. When teaching family and consumer sciences, the goal is to have a learner-active classroom. Revamping the high school's…

  18. Sink or Swim: Learning by Doing in a Supply Chain Integration Activity*

    Science.gov (United States)

    Harnowo, Akhadian S.; Calhoun, Mikelle A.; Monteiro, Heather

    2016-01-01

    Studies show that supply chain integration (SCI) is important to organizations. This article describes an activity that places students in the middle of an SCI scenario. The highly interactive hands-on simulation requires only 50 to 60 minutes of classroom time, may be used with 18 to about 36 students, and involves minimal instructor preparation.…

  19. Ding Dong, You've Got Mail! A Lab Activity for Teaching the Internet of Things

    Science.gov (United States)

    Frydenberg, Mark

    2017-01-01

    Connecting ordinary devices to the Internet is a defining characteristic of the Internet of Things. In this hands-on lab activity, students will connect a wireless doorbell to the Internet using a Raspberry Pi computer. By modifying and running a program on the Raspberry Pi to send an email or text message notifying a recipient that someone is at…

  20. The Math Explorer: Games and Activities for Middle School Youth Groups.

    Science.gov (United States)

    Murphy, Pat; Lambertson, Lori; Tesler, Pearl

    This book offers games and mathematics activities using a hands-on approach for middle school students and features games, puzzles, experiments, and projects. Contents include: (1) "Boxed In!"; (2) "Oddball"; (3) "Pig"; (4) "Madagascar Solitaire"; (5) "Fantastic Four"; (6) "Eratosthenes' Sieve"; (7) "Hopping Hundred"; (8) "Tic-Tac-Toe Times"; (9)…

  1. Impact of Middle School Student Energy Monitoring Activities on Climate Change Beliefs and Intentions

    Science.gov (United States)

    Christensen, Rhonda; Knezek, Gerald

    2018-01-01

    The Going Green! Middle Schoolers Out to Save the World project aims to direct middle school students' enthusiasm for hands-on activities toward interest in science and other STEM areas while guiding them to solve real-world problems. Students in this project are taught by their teachers to use energy monitoring equipment to audit standby power…

  2. Enhancing Science Education through Extracurricular Activities: A Retrospective Study of "Suzy Science and the Whiz Kids[C]"

    Science.gov (United States)

    Kralina, Linda M.

    2009-01-01

    Extracurricular activities (ECA) are informal settings offering free-choice experiences that are generally voluntary, open-ended, non-sequential, self-directed, hands-on, and evaluation-free. This mixed methods study investigates participation in a high school science ECA by collecting the memories of former student members for their perceptions…

  3. Active Science as a Contribution to the Trauma Recovery Process: Preliminary Indications with Orphans from the 1994 Genocide in Rwanda

    Science.gov (United States)

    Perrier, Frederic; Nsengiyumva, Jean-Baptiste

    2003-01-01

    Constructivist, hands-on, inquiry-based, science activities may have a curative potential that could be valuable in a psychological assistance programme for child victims of violence and war. To investigate this idea, pilot sessions were performed in an orphanage located in Ruhengeri, Rwanda, with seven young adults and two groups of 11 children…

  4. Just Be It! Healthy and Fit Increases Fifth Graders' Fruit and Vegetable Intake, Physical Activity, and Nutrition Knowledge

    Science.gov (United States)

    DelCampo, Diana; Baca, Jacqueline S.; Jimenez, Desaree; Sanchez, Paula Roybal; DelCampo, Robert

    2011-01-01

    Just Be It! Healthy and Fit reduces the risk factors for childhood obesity for fifth graders using hands-on field trips, in-class lessons, and parent outreach efforts. Pre-test and post-test scores from the year-long classroom instruction showed a statistically significant increase in fruit and vegetable intake, physical activity, and nutrition…

  5. Machine Learning-Augmented Propensity Score-Adjusted Multilevel Mixed Effects Panel Analysis of Hands-On Cooking and Nutrition Education versus Traditional Curriculum for Medical Students as Preventive Cardiology: Multisite Cohort Study of 3,248 Trainees over 5 Years

    Science.gov (United States)

    Dart, Lyn; Vanbeber, Anne; Smith-Barbaro, Peggy; Costilla, Vanessa; Samuel, Charlotte; Terregino, Carol A.; Abali, Emine Ercikan; Dollinger, Beth; Baumgartner, Nicole; Kramer, Nicholas; Seelochan, Alex; Taher, Sabira; Deutchman, Mark; Evans, Meredith; Ellis, Robert B.; Oyola, Sonia; Maker-Clark, Geeta; Budnick, Isadore; Tran, David; DeValle, Nicole; Shepard, Rachel; Chow, Erika; Petrin, Christine; Razavi, Alexander; McGowan, Casey; Grant, Austin; Bird, Mackenzie; Carry, Connor; McGowan, Glynis; McCullough, Colleen; Berman, Casey M.; Dotson, Kerri; Sarris, Leah; Harlan, Timothy S.; Co-investigators, on behalf of the CHOP

    2018-01-01

    Background Cardiovascular disease (CVD) annually claims more lives and costs more dollars than any other disease globally amid widening health disparities, despite the known significant reductions in this burden by low cost dietary changes. The world's first medical school-based teaching kitchen therefore launched CHOP-Medical Students as the largest known multisite cohort study of hands-on cooking and nutrition education versus traditional curriculum for medical students. Methods This analysis provides a novel integration of artificial intelligence-based machine learning (ML) with causal inference statistics. 43 ML automated algorithms were tested, with the top performer compared to triply robust propensity score-adjusted multilevel mixed effects regression panel analysis of longitudinal data. Inverse-variance weighted fixed effects meta-analysis pooled the individual estimates for competencies. Results 3,248 unique medical trainees met study criteria from 20 medical schools nationally from August 1, 2012, to June 26, 2017, generating 4,026 completed validated surveys. ML analysis produced similar results to the causal inference statistics based on root mean squared error and accuracy. Hands-on cooking and nutrition education compared to traditional medical school curriculum significantly improved student competencies (OR 2.14, 95% CI 2.00–2.28, p < 0.001) and MedDiet adherence (OR 1.40, 95% CI 1.07–1.84, p = 0.015), while reducing trainees' soft drink consumption (OR 0.56, 95% CI 0.37–0.85, p = 0.007). Overall improved competencies were demonstrated from the initial study site through the scale-up of the intervention to 10 sites nationally (p < 0.001). Discussion This study provides the first machine learning-augmented causal inference analysis of a multisite cohort showing hands-on cooking and nutrition education for medical trainees improves their competencies counseling patients on nutrition, while improving students' own diets. This study suggests that

  6. Machine Learning-Augmented Propensity Score-Adjusted Multilevel Mixed Effects Panel Analysis of Hands-On Cooking and Nutrition Education versus Traditional Curriculum for Medical Students as Preventive Cardiology: Multisite Cohort Study of 3,248 Trainees over 5 Years.

    Science.gov (United States)

    Monlezun, Dominique J; Dart, Lyn; Vanbeber, Anne; Smith-Barbaro, Peggy; Costilla, Vanessa; Samuel, Charlotte; Terregino, Carol A; Abali, Emine Ercikan; Dollinger, Beth; Baumgartner, Nicole; Kramer, Nicholas; Seelochan, Alex; Taher, Sabira; Deutchman, Mark; Evans, Meredith; Ellis, Robert B; Oyola, Sonia; Maker-Clark, Geeta; Dreibelbis, Tomi; Budnick, Isadore; Tran, David; DeValle, Nicole; Shepard, Rachel; Chow, Erika; Petrin, Christine; Razavi, Alexander; McGowan, Casey; Grant, Austin; Bird, Mackenzie; Carry, Connor; McGowan, Glynis; McCullough, Colleen; Berman, Casey M; Dotson, Kerri; Niu, Tianhua; Sarris, Leah; Harlan, Timothy S; Co-Investigators, On Behalf Of The Chop

    2018-01-01

    Cardiovascular disease (CVD) annually claims more lives and costs more dollars than any other disease globally amid widening health disparities, despite the known significant reductions in this burden by low cost dietary changes. The world's first medical school-based teaching kitchen therefore launched CHOP-Medical Students as the largest known multisite cohort study of hands-on cooking and nutrition education versus traditional curriculum for medical students. This analysis provides a novel integration of artificial intelligence-based machine learning (ML) with causal inference statistics. 43 ML automated algorithms were tested, with the top performer compared to triply robust propensity score-adjusted multilevel mixed effects regression panel analysis of longitudinal data. Inverse-variance weighted fixed effects meta-analysis pooled the individual estimates for competencies. 3,248 unique medical trainees met study criteria from 20 medical schools nationally from August 1, 2012, to June 26, 2017, generating 4,026 completed validated surveys. ML analysis produced similar results to the causal inference statistics based on root mean squared error and accuracy. Hands-on cooking and nutrition education compared to traditional medical school curriculum significantly improved student competencies (OR 2.14, 95% CI 2.00-2.28, p < 0.001) and MedDiet adherence (OR 1.40, 95% CI 1.07-1.84, p = 0.015), while reducing trainees' soft drink consumption (OR 0.56, 95% CI 0.37-0.85, p = 0.007). Overall improved competencies were demonstrated from the initial study site through the scale-up of the intervention to 10 sites nationally ( p < 0.001). This study provides the first machine learning-augmented causal inference analysis of a multisite cohort showing hands-on cooking and nutrition education for medical trainees improves their competencies counseling patients on nutrition, while improving students' own diets. This study suggests that the public health and medical sectors can

  7. Machine Learning-Augmented Propensity Score-Adjusted Multilevel Mixed Effects Panel Analysis of Hands-On Cooking and Nutrition Education versus Traditional Curriculum for Medical Students as Preventive Cardiology: Multisite Cohort Study of 3,248 Trainees over 5 Years

    Directory of Open Access Journals (Sweden)

    Dominique J. Monlezun

    2018-01-01

    Full Text Available Background. Cardiovascular disease (CVD annually claims more lives and costs more dollars than any other disease globally amid widening health disparities, despite the known significant reductions in this burden by low cost dietary changes. The world’s first medical school-based teaching kitchen therefore launched CHOP-Medical Students as the largest known multisite cohort study of hands-on cooking and nutrition education versus traditional curriculum for medical students. Methods. This analysis provides a novel integration of artificial intelligence-based machine learning (ML with causal inference statistics. 43 ML automated algorithms were tested, with the top performer compared to triply robust propensity score-adjusted multilevel mixed effects regression panel analysis of longitudinal data. Inverse-variance weighted fixed effects meta-analysis pooled the individual estimates for competencies. Results. 3,248 unique medical trainees met study criteria from 20 medical schools nationally from August 1, 2012, to June 26, 2017, generating 4,026 completed validated surveys. ML analysis produced similar results to the causal inference statistics based on root mean squared error and accuracy. Hands-on cooking and nutrition education compared to traditional medical school curriculum significantly improved student competencies (OR 2.14, 95% CI 2.00–2.28, p<0.001 and MedDiet adherence (OR 1.40, 95% CI 1.07–1.84, p=0.015, while reducing trainees’ soft drink consumption (OR 0.56, 95% CI 0.37–0.85, p=0.007. Overall improved competencies were demonstrated from the initial study site through the scale-up of the intervention to 10 sites nationally (p<0.001. Discussion. This study provides the first machine learning-augmented causal inference analysis of a multisite cohort showing hands-on cooking and nutrition education for medical trainees improves their competencies counseling patients on nutrition, while improving students’ own diets. This

  8. Teaching Diffraction with Hands-On Optical Spectrometry

    Science.gov (United States)

    Fischer, Robert

    2012-01-01

    Although the observation of optical spectra is common practice in physics classes, students are usually limited to a passive, qualitative observation of nice colours. This paper discusses a diffraction-based spectrometer that allows students to take quantitative measurements of spectral bands. Students can build it within minutes from generic…

  9. Hydroponic Garden Promotes Hands-on Learning, Healthy Eating

    Science.gov (United States)

    Anderson, Melinda; Swafford, Melinda

    2011-01-01

    The Carl D. Perkins Career Technical Improvement Act of 2006 encourages integration of academic instruction to improve student learning, impact employment skills of students, and enhance problem-solving skills by using authentic real-world situations. Academic integration is accomplished by integrating concepts of English, math, science,…

  10. Strategically Positioned: Breastfeeding, Advocacy, and the Hands-On Nurse.

    Science.gov (United States)

    Gathron, Erika L

    2017-08-01

    Breastfeeding, a health behavior that provides well-known benefits for mothers, infants, and children, is an essential strategy to improve public health. Breastfeeding can reduce the incidence of infant illness and death and provides both short- and longterm physiological benefits to mothers. National and international government agencies and grassroots organizations supporting breastfeeding include the World Health Organization, the United Nations International Children's Emergency Fund, the World Alliance for Breastfeeding Action, the Centers for Disease Control and Prevention, and the La Leche League. In the United States, breastfeeding of infants was the norm until the late 1890s when the Progressive Era's emphasis on science and modernity led to the transition of childbirth from residential in-home births to community-based hospital births and the aggressive rise of the baby formula industry. By 1966, only 18% of mothers were exclusively breastfeeding their infants at hospital discharge. This drastic decrease in breastfeeding reduced the percentage of mothers and grandmothers who could share their breastfeeding knowledge and experience. Nurses who provide care for women and infants are essential stakeholders in bridging the breastfeeding knowledge gap by offering education on the short- and long-term health benefits of breastfeeding to both mother and baby and timely encouragement to mothers during the most significant time for establishing lactation.

  11. A Hands-on Guide to Video Podcasting

    Science.gov (United States)

    Christensen, L. L.; Hurt, R.

    2008-02-01

    Video podcasting, or vodcasting, is the latest evolution of the podcast revolution. The market for on demand multimedia content spans the gamut, ranging from portable media players to computers, and increasingly to televisions through home media centres. This new mode of accessing content is rapidly growing in popularity, particularly among younger audiences. Vodcasting allows a direct link between consumer and content producer, bypassing traditional media networks, making it ideal for EPO efforts. Even modest budgets can yield compelling astronomy vodcasts that will appeal to a large audience. Gateways like the iTunes Store and video community websites such as Veoh and YouTube have created new content markets where none existed before. This paper highlights the key steps for producing a vodcast and shows some statistics from two leading astronomy vodcasts. The reader will see how to make (or improve) a science video podcast and learn about some of the latest developments in this rapidly-evolving field.

  12. Hands-on Scorecarding in the Higher Education Sector

    Science.gov (United States)

    Scholey, Cam; Armitage, Howard

    2006-01-01

    The balanced scorecard, introduced by Robert Kaplan and David Norton, has evolved from an improved performance measurement system to an integrated strategic planning, implementation, and scorecarding system. Simple yet powerful second-generation balanced scorecards depict the organization's strategy through a series of strategy maps and scorecards…

  13. Vanishing hands? On the link between product and organization architecture

    OpenAIRE

    Press, Kerstin; Geipel, Markus M.

    2017-01-01

    The present article investigates whether modular product architectures deliver better and more differentiated products, given their production in disintegrated and integrated settings. A theoretic model benchmarks the performance of disintegration and integration for different degrees of product modularity by measuring both product quality and differentiation. In line with conventional wisdom, (nearly) modular products befit disintegration insofar as disintegration increases quality. However,...

  14. Livestock Judges Training Provides Hands-On Experience

    Science.gov (United States)

    Nash, Scott; Harrison, Steve; Packham, Joel; Sanchez, Dawn; Jensen, Jim; Kaysen, Brett; King, Marc

    2016-01-01

    The judging of a market animal at a fair is the highlight of a youth-owned livestock project. Livestock judges are hired to evaluate youth projects at fairs. They are critical ambassadors for agriculture and influence countless youths and adults. Judges must be knowledgeable about current animal evaluation methods that support youth development.…

  15. Hands-on science: science education with and for society

    OpenAIRE

    Costa, Manuel F. M., ed. lit.; Pombo, José Miguel Marques, ed. lit.; Vázquez Dorrío, José Benito, ed. lit.

    2014-01-01

    The decisive importance of Science on the development of modern societies gives Science Education a role of special impact. Society sets the requirements rules and procedures of Education defining what concepts and competencies citizens must learn and how this learning should take place. Educational policies set by governments, elected and or imposed, not always reflects the will and ruling of Society. The School as pivotal element of our modern educational system must look ...

  16. Student Learning through Hands-On Industry Projects

    Science.gov (United States)

    Acheson, Lingma Lu

    2014-01-01

    Learning is most effective when accompanied by doing. If someone desires to become a baseball player, being told how to play the game, watching others play and even understanding the rules of the game are mostly ineffective if the individual never "swings the bat". This paper outlines the implementation of this method (swinging the bat)…

  17. Hands-On Herpetology: Exploring Ecology and Conservation.

    Science.gov (United States)

    Schneider, Rebecca L.; Krasny, Marianne E.; Morreale, Stephen J.

    This guide provides an introduction to the study of reptiles and amphibians and presents opportunities for young people to become involved in their conservation. This book is designed as an instructional guide for many educators in various settings from classroom to nature center. The material provides a thorough introduction to the world of…

  18. Developing Research Competence in Undergraduate Students through Hands on Learning

    Directory of Open Access Journals (Sweden)

    Zoe E. Davidson

    2015-01-01

    Full Text Available Evidence-based practice is the foundation of nutrition and dietetics. To effectively apply evidence-based practice, health professionals must understand the basis of research. Previous work has identified the lack of involvement of dietitians in research. As part of a curriculum redevelopment in undergraduate nutrition and dietetics courses, research skill teaching was enhanced. This study evaluated the effect of a new, year two level nutrition research methods unit on the perceived research skills of students. The unit consisted of two key components: a student-led class research project and a small group systematic literature review. Prior to commencement and on completion of the course, students completed a modified version of the Research Skills Questionnaire. Results demonstrated that self-perceived competence increased by a small degree in a set of specific research skills as well as in broader skills such as information gathering and handling, information evaluation, ability to work independently, and critical thinking. The new research unit was also evaluated highly on a student satisfaction survey. Despite these positive findings, students indicated that their general feelings towards research or a career in research were unchanged. In summary, this unit enhanced students’ perceived research skills. Further exploration of students’ attitude towards research is warranted.

  19. Political Left and Right: Our Hands-On Logic

    OpenAIRE

    Frits Bienfait; Walter E. A. van Beek

    2014-01-01

    The origins and immediate vitality of the left/right divide which emerged in French revolutionary politics from 1789 can only be understood against the background of a much older classification dynamic based on the primacy of the right hand, first described by Robert Hertz in 1909. This dynamic infused political thinking first in Versailles and since 1815 in democracies throughout the world. In the process, the classical left/right polarity acquired a new dimension: the complementary notions ...

  20. Show and Sell: Teaching Sales through Hands-On Selling

    Science.gov (United States)

    Rippé, Cindy B.

    2015-01-01

    There is a shortage of qualified salespeople, which creates a challenge for educators to prepare more students for a sales career. One of the most common teaching techniques used in preparing students is role playing, which mirrors real-world selling. However, role plays are not necessarily authentic because the players and conditions are not a…

  1. Introduction to social media investigation a hands-on approach

    CERN Document Server

    Golbeck, Jennifer

    2015-01-01

    If you're interested in using social media as an investigative tool, Introduction to Social Media Investigation will show you how! Social networks and social media, like Facebook, Twitter, and Foursquare, are some of the most popular services on the Web, with hundreds of millions of users. The public information that people share on these sites can be valuable for anyone interested in investigating people of interest through open, public sources. Social media as an investigative device is in its infancy and not well understood. This book presents an overview of social media and discusses s

  2. Thinking with Spinoza about 'Hands-On' Learning

    Science.gov (United States)

    Roth, Wolff-Michael

    2018-01-01

    Despite its advanced age of about 375 years, the mind--body (psychophysical) problem is alive and well, in part because it is anchored so well institutionally in schools and in research (scientific vs. interpretive psychology). This continued presence is astonishing in the light of the fact that the seed for its solution, sown in Spinoza's…

  3. A hands-on introduction to quantum mechanics

    Science.gov (United States)

    Jackson, David

    2015-03-01

    At Dickinson College, we have implemented a series of experiments that are designed to expose students to the strange and fascinating world of quantum mechanics. These experiments are employed in our sophomore-level course titled Introduction to Relativistic and Quantum Physics, our version of the traditional Modern Physics course. The experiments make use of a correlated light source produced via the process of Spontaneous Parametric Down Conversion (SPDC). Using such a light source, students can experimentally verify that when a single photon is incident on a beam splitter, the photon is either transmitted or reflected--it never goes both ways. If instead the photons are directed into a Mach-Zehnder interferometer, students then observe an interference pattern, suggesting that each photon must somehow take both paths in the interferometer (in apparent contradiction of the first experiment). Finally, the interference pattern is observed to disappear if the photons are ``tagged'' to distinguish which path they take, only to mysteriously reappear if that path information is ``erased'' after emerging from the interferometer. In this talk, I will provide an overview of these experiments and the accompanying theory that students learn in this course. This work was supported, in part, by NSF Grant 0737230.

  4. Support for hands-on optics immersions (Conference Presentation)

    Science.gov (United States)

    Spalding, Gabriel C.; McCann, Lowell I.

    2016-09-01

    The Advanced Laboratory Physics Association (ALPhA) is an official affiliate organization of the AAPT, supporting upper-level undergraduate instructional lab education in physics. The ALPhA Immersions program is intended to be an efficient use of an instructor's time: with expert colleague-mentors on hand they spend 2.5 days learning a key new instructional experiment (of their choice) well enough to confidently teach it to the students at their home institutions. At an ALPhA Immersion, participants work in groups of no more than three per experimental setup. Our follow-up surveys support the notion that this individualized, concentrated focus directly results in significant updating and improvement of undergraduate laboratory instruction in physics across the country. Such programs have the effect of encouraging investment, on the part of individual institutions. For example, we have disseminated ideas, training, and equipment for contemporary single-photon-based instructional labs dealing with core, contemporary issues in Quantum Mechanics. By the time this paper is presented, ALPhA will have delivered at least 420 single-photon detectors to a wide variety of educational institutions. We have also partnered with the non-profit Jonathan F. Reichert Foundation to support equipment acquisition by institutions participating in our wide variety of training programs.

  5. Teaching Experimental Methods: A Framework for Hands-On Modules

    Science.gov (United States)

    Doherty, David

    2011-01-01

    Experiments provide a simple and engaging framework for familiarizing students with the process of quantitative social research. In this article, I illustrate how experiments can be used in the classroom environment by describing a module that was implemented in four high school classrooms. The module familiarized students with how the scientific…

  6. Programming massively parallel processors a hands-on approach

    CERN Document Server

    Kirk, David B

    2010-01-01

    Programming Massively Parallel Processors discusses basic concepts about parallel programming and GPU architecture. ""Massively parallel"" refers to the use of a large number of processors to perform a set of computations in a coordinated parallel way. The book details various techniques for constructing parallel programs. It also discusses the development process, performance level, floating-point format, parallel patterns, and dynamic parallelism. The book serves as a teaching guide where parallel programming is the main topic of the course. It builds on the basics of C programming for CUDA, a parallel programming environment that is supported on NVI- DIA GPUs. Composed of 12 chapters, the book begins with basic information about the GPU as a parallel computer source. It also explains the main concepts of CUDA, data parallelism, and the importance of memory access efficiency using CUDA. The target audience of the book is graduate and undergraduate students from all science and engineering disciplines who ...

  7. Teaching Computer Security with a Hands-On Component

    OpenAIRE

    Murthy , Narayan

    2011-01-01

    Part 2: WISE 7; International audience; To address national needs for computer security education, many universities have incorporated computer and security courses into their undergraduate and graduate curricula. Our department has introduced computer security courses at both the undergraduate and the graduate level. This paper describes our approach, our experiences, and lessons learned in teaching a Computer Security Overview course.There are two key elements in the course: Studying comput...

  8. Hands on Education Through Student-Industry Partnerships

    Science.gov (United States)

    Brown, J.; Wolfson, M.; Morris, K.

    2013-09-01

    Lockheed Martin Space Systems Company has invested in the future generation of engineers by partially funding and mentoring CubeSat projects around the country. One CubeSat in particular, ALL-STAR, has shown how this industry/university partnership benefits both the students and their mentors. Students gain valuable insight into aspects of spacecraft design that aren't taught in classes. They also start learning about industry processes for designing, building, and testing satellites before ever working in that environment. Because of this experience, industry is getting more qualified engineers starting fresh out of college. In addition Lockheed Martin's partnership with the university will allow them to use the students to help build affordable CubeSats for internal and customer's research and development projects. The mentoring also challenges the engineers to think differently about similar problems they face every day with their larger programs in order to make the solution simple and affordable.

  9. A Hands-on Approach to Evolutionary Simulation

    DEFF Research Database (Denmark)

    Valente, Marco; Andersen, Esben Sloth

    2002-01-01

    in an industry (or an economy). To abbreviate we call such models NelWin models. The new system for the programming and simulation of such models is called the Laboratory for simulation development - abbreviated as Lsd. The paper is meant to allow readers to use the Lsd version of a basic NelWin model: observe...... the model content, run the simulation, interpret the results, modify the parameterisation, etc. Since the paper deals with the implementation of a fairly complex set of models in a fairly complex programming and simulation system, it does not contain full documentation of NelWin and Lsd. Instead we hope...... to give the reader a first introduction to NelWin and Lsd and inspire a further exploration of them....

  10. A "Hands on" Strategy for Teaching Genetic Algorithms to Undergraduates

    Science.gov (United States)

    Venables, Anne; Tan, Grace

    2007-01-01

    Genetic algorithms (GAs) are a problem solving strategy that uses stochastic search. Since their introduction (Holland, 1975), GAs have proven to be particularly useful for solving problems that are "intractable" using classical methods. The language of genetic algorithms (GAs) is heavily laced with biological metaphors from evolutionary…

  11. Political Left and Right: Our Hands-On Logic

    Directory of Open Access Journals (Sweden)

    Frits Bienfait

    2014-12-01

    Full Text Available The origins and immediate vitality of the left/right divide which emerged in French revolutionary politics from 1789 can only be understood against the background of a much older classification dynamic based on the primacy of the right hand, first described by Robert Hertz in 1909. This dynamic infused political thinking first in Versailles and since 1815 in democracies throughout the world. In the process, the classical left/right polarity acquired a new dimension: the complementary notions of ‘accepting’ and ‘questioning’ the existing social order. An essential feature of both the age-old classical polarity and the ensuing political polarity is that they are intimately bound up with local and evolving social contexts: there is no single content-based definition of left and right. As long as the majority of us are predisposed to use our right hand when acting in the world, ‘left versus right’ will remain the most important political antithesis in western-type democracies.

  12. Interaction devices for hands-on desktop design

    Science.gov (United States)

    Ju, Wendy; Madsen, Sally; Fiene, Jonathan; Bolas, Mark T.; McDowall, Ian E.; Faste, Rolf

    2003-05-01

    Starting with a list of typical hand actions - such as touching or twisting - a collection of physical input device prototypes was created to study better ways of engaging the body and mind in the computer aided design process. These devices were interchangeably coupled with a graphics system to allow for rapid exploration of the interplay between the designer's intent, body motions, and the resulting on-screen design. User testing showed that a number of key considerations should influence the future development of such devices: coupling between the physical and virtual worlds, tactile feedback, and scale. It is hoped that these explorations contribute to the greater goal of creating user interface devices that increase the fluency, productivity and joy of computer-augmented design.

  13. ISO training program mixes lectures, hands-on exercises

    International Nuclear Information System (INIS)

    Sakofsky, S.; Vitale, D.

    1994-01-01

    Early in 1990, the Dresser-Rand Co., made the decision to upgrade its purchased material quality program and pursue ISO 9000 registration for all product divisions. A joint quality-purchasing council from all US based divisions met and developed a new strategy that included: developing and maintaining a common external audit schedule eliminating duplicate audits; development of a formal training program for auditors; implementing a rule for all divisions that called for internal and external audits to be conducted by certified auditors; implementing an aggressive internal audit program for each division preparing for ISO 9001 or 9002 registration. Development of a formal training program began with educating and training future instructors. Two people were selected who had previous audit and quality system experience. Both were sent to various seminars on ISO 9000, attended a lead assessor course, passed the examination, and became registered with the Institute of Quality Assurance (IQA) in the United Kingdom. The original course was developed by a consultant along with one future instructor. Course content used traditional auditing methodology, but included many team exercises including an actual factory audit. The paper describes the methods and contents of this training course

  14. EFFECTIVENESS OF ACTIVE TEACHING METHODS FOR THE RESIDENTS OF PHYSICAL MEDICINE AND REHABILITATION

    OpenAIRE

    Mohan Raj Manjalavil; Reeba Mary Mani; Shehadad Kammili; Sreejith Kalathummarthu; Hemalta Viswan; Sooraj Rajagopal; Shervin Sheriff; Sreedevi Menon Parappil

    2017-01-01

    BACKGROUND Lecture is the most common teaching aid not only for medical undergraduates, but also specialty residents. There are many disadvantages for this type of teaching. Active teaching methods include didactic lectures followed by interactive sessions, problem-based teaching and hands on demonstration apart from the traditional didactic lecture. The aim of this project was to compare the effectiveness of active teaching method over the didactic lecture to the first year re...

  15. Variation-Aware Design of Custom Integrated Circuits A Hands-on Field Guide A Hands-on Field Guide

    CERN Document Server

    McConaghy, Trent; Dyck, Jeffrey; Gupta, Amit

    2013-01-01

    This book targets custom IC designers who are encountering variation issues in their designs, especially for modern process nodes at 45nm and below, such as statistical process variations, environmental variations, and layout effects.  The authors have created a field guide to show how to handle variation proactively, and to understand the benefits of doing so. Readers facing variation challenges in their memory, standard cell, analog/RF, and custom digital designs will find easy-to-read, pragmatic solutions.   Reviews the most important concepts in variation-aware design, including types of variables and variation, useful variation-aware design terminology, and an overview and comparison of high-level design flows. Describes and compares a suite of approaches and flows for PVT corner-driven design and verification. Presents Fast PVT, a novel, confidence-driven global optimization technique for PVT corner extraction and verification that is both rapid and reliable. Presents a visually-oriented overview of ...

  16. A Career Guidance Curriculum for Ninth Grade Students. Occupational Cluster Learning Activities. Business-Environmental. Part 1 of 2. Ninth Grade Guidance Project. Project Duration: July 16, 1979, to June 30, 1980.

    Science.gov (United States)

    Cape May County Vocational Schools, NJ.

    This first of two parts presents learning activities for four occupational clusters of a ninth-grade cluster program. It contains theory and hands-on activities that explore the occupational requirements and working environment of these areas to help students make intelligent decisions of possible career choices based on levels of interest and…

  17. Impurity concentration limits and activation in fusion reactor structural materials

    International Nuclear Information System (INIS)

    Zucchetti, M.

    1991-01-01

    This paper examines waste management problems related to impurity activation in first-wall, shield, and magnet materials for fusion reactors. Definitions of low activity based on hands-on recycling, remote recycling, and shallow land burial waste management criteria are discussed. Estimates of the impurity concentration in low-activation materials (elementally substituted stainless steels and vanadium alloys) are reported. Impurity activation in first-wall materials turns out to be critical after a comparison of impurity concentration limits and estimated levels. Activation of magnet materials is then considered: Long-term activity is not a concern, while short-term activity is. In both cases, impurity activation is negligible. Magnet materials, and all other less flux-exposed materials, have no practical limitation on impurities in terms of induced radioactivity

  18. Rationale and study protocol of the EASY Minds (Encouraging Activity to Stimulate Young Minds) program: cluster randomized controlled trial of a primary school-based physical activity integration program for mathematics.

    Science.gov (United States)

    Riley, Nicholas; Lubans, David R; Holmes, Kathryn; Morgan, Philip J

    2014-08-08

    Novel strategies are required to increase school-based physical activity levels of children. Integrating physical activity in mathematics lessons may lead to improvements in students' physical activity levels as well as enjoyment, engagement and learning. The primary aim of this study is to evaluate the impact of a curriculum-based physical activity integration program known as EASY Minds (Encouraging Activity to Stimulate Young Minds) on children's daily school time physical activity levels. Secondary aims include exploring the impact of EASY Minds on their engagement and 'on task' behaviour in mathematics. Grade 5/6 classes from eight public schools in New South Wales, Australia will be randomly allocated to intervention (n = 4) or control (n = 4) groups. Teachers from the intervention group will receive one day of professional development, a resource pack and asked to adapt their lessons to embed movement-based learning in their daily mathematics program in at least three lessons per week over a six week period. Intervention support will be provided via a weekly email and three lesson observations. The primary outcomes will be children's physical activity levels (accelerometry) across both the school day and during mathematics lessons (moderate-to-vigorous physical activity and sedentary time). Children's 'on-task' behaviour, enjoyment of mathematics and mathematics attainment will be assessed as secondary outcomes. A detailed process evaluation will be undertaken. EASY Minds is an innovative intervention that has the potential to improve key physical and academic outcomes for primary school aged children and help guide policy and practice regarding the teaching of mathematics. Australian and New Zealand Clinical Trials Register ACTRN12613000637741 13/05/2013.

  19. Exploring the Extreme: High Performance Learning Activities in Mathematics, Science and Technology. An Educator's Guide. EG-2002-10-001-DFRC

    Science.gov (United States)

    Dana, Judi; Kock, Meri; Lewis, Mike; Peterson, Bruce; Stowe, Steve

    2010-01-01

    The many activities contained in this teaching guide emphasize hands-on involvement, prediction, data collection and interpretation, teamwork, and problem solving. The guide also contains background information about aeronautical research that can help students learn how airplanes fly. Following the background sections are a series of activities…

  20. Engaging Citizens In Discussions of Coastal Climate ChangeTwo examples of place-based research that engaged community members will be presented. Lessons learned in how to engage community members and working with high school students and hands-on learning across generations can provide insights into social and ecosystem change will be shared.

    Science.gov (United States)

    Kruger, L. E.; Johnson, A. C.

    2017-12-01

    By engaging community members as research partners, people become not just the subject of the story, they become storytellers as well. Participatory community-based research that engages community residents in gathering and sharing their lived experiences is instrumental in connecting people to each other and their forests and forest science and helpful when confronted by change. Two examples of place-based research that engaged community members as researchers will be presented. What factors led to collaborative outcomes that integrated citizen-informed knowledge with scientific knowledge? What lessons were learned in how best to engage community members? How did working with high school students draw even hesitant members of the community to participate? By strengthening bonds between students and their communities, both natural and social environments, we can provide young people with opportunities to better understand how they fit into the greater community and their natural environment. Hands-on learning that explores experiences in nature across generations can benefit communities, especially youth, and can provide insights into social and ecosystem change.

  1. Activities Joining Learning Objectives to Assessments in Introductory Astronomy

    Science.gov (United States)

    Palen, Stacy E.; Larson, Ana M.

    2015-01-01

    In recent years, accreditation boards and other governing bodies have been pushing hard for explicit learning goals and quantitative measures of assessment for general education courses such as Astronomy 101. This added assessment burden can be problematic, especially for harried adjuncts teaching multiple courses at multiple institutions. It would be helpful to have a field-tested set of combined hands-on activities and assessment tools that help instructors meet these assessment requirements. The authors have produced just such a set. We have been using hands-on activities in our classrooms for more than 15 years. These activities require no special equipment or preparation and can be completed within an hour by most students working in groups of two or three. The sections of each activity are arranged in steps, guiding the students from initial knowledge-level questions or practice to a final evaluation or synthesis of what they have just accomplished. Students thus get practice thinking at higher cognitive levels. A recent addition to these activities is the inclusion of formalized learning objectives and accompanying pre- and post-activity questions. The pre-activity questions address common misconceptions, relate familiar analogous terrestrial examples to the activity, and act as a brief refresher meta-concepts like scale factors, measurements, and basic mathematics review. The post-activity questions review the most important concepts introduced in the activity. We present a number of examples as well as a summary as to how we have initiated their use in a large lecture setting of 300 students, in smaller classrooms of 15 students, and in a community college online course.

  2. Inquiry learning for gender equity using History of Science in Life and Earth Sciences’ learning environments

    OpenAIRE

    C. Sousa

    2016-01-01

    [EN] The main objective of the present work is the selection and integration of objectives and methods of education for gender equity within the Life and Earth Sciences’ learning environments in the current portuguese frameworks of middle and high school. My proposal combines inquiry learning-teaching methods with the aim of promoting gender equity, mainly focusing in relevant 20th century women-scientists with a huge contribute to the History of Science.The hands-on and minds-on activities p...

  3. The Influence of Toy Design Activities on Middle School Students' Understanding of the Engineering Design Processes

    Science.gov (United States)

    Zhou, Ninger; Pereira, Nielsen L.; George, Tarun Thomas; Alperovich, Jeffrey; Booth, Joran; Chandrasegaran, Senthil; Tew, Jeffrey David; Kulkarni, Devadatta M.; Ramani, Karthik

    2017-10-01

    The societal demand for inspiring and engaging science, technology, engineering, and mathematics (STEM) students and preparing our workforce for the emerging creative economy has necessitated developing students' self-efficacy and understanding of engineering design processes from as early as elementary school levels. Hands-on engineering design activities have shown the potential to promote middle school students' self-efficacy and understanding of engineering design processes. However, traditional classrooms often lack hands-on engineering design experiences, leaving students unprepared to solve real-world design problems. In this study, we introduce the framework of a toy design workshop and investigate the influence of the workshop activities on students' understanding of and self-efficacy beliefs in engineering design. Using a mixed method approach, we conducted quantitative analyses to show changes in students' engineering design self-efficacy and qualitative analyses to identify students' understanding of the engineering design processes. Findings show that among the 24 participants, there is a significant increase in students' self-efficacy beliefs after attending the workshop. We also identified major themes such as design goals and prototyping in students' understanding of engineering design processes. This research provides insights into the key elements of middle school students' engineering design learning and the benefits of engaging middle school students in hands-on toy design workshops.

  4. Neutron activation in EBT-P

    International Nuclear Information System (INIS)

    Driemeyer, D.E.

    1983-01-01

    Neutron activation due to photoneutron production in the lead shields proposed to protect the EBT-P superconducting coils from excessive x-ray heating was investigated. The photoneutron flux distribution in various EBT-P structural components was calculated for typical upgrade operating conditions using a standard two-dimensional transport model (TWOTRAN). Activity levels were then evaluated for major structural materials using activation cross sections tabulated in the GAMMON library. Activation dose rates in the device enclosure following several days of 8h/day upgrade (90GHz) operation were found to be approx. 6 mrem/h, decaying to <0.25 mrem/h in approx. 3 days. This requires radiation monitoring of all personnel entering the device enclosure during this time, but should not generally restrict hands on access to the device. There is thus no strong motivation to replace lead with another shield material; however, it may be desirable to borate the enclosure walls in order to reduce the effect which impurities might have on activity levels

  5. Radiation shielding activities at the OECD/Nuclear Energy Agency

    International Nuclear Information System (INIS)

    Sartori, Enrico; Vaz, Pedro

    2000-01-01

    The OECD Nuclear Energy Agency (NEA) has devoted considerable effort over the years to radiation shielding issues. The issues are addressed through international working groups. These activities are carried out in close co-ordination and co-operation with the Radiation Safety Information Computational Center (RSICC). The areas of work include: basic nuclear data activities in support of radiation shielding, computer codes, shipping cask shielding applications, reactor pressure vessel dosimetry, shielding experiments database. The method of work includes organising international code comparison exercises and benchmark studies. Training courses on radiation shielding computer codes are organised regularly including hands-on experience in modelling skills. The scope of the activity covers mainly reactor shields and spent fuel transportation packages, but also fusion neutronics and in particular shielding of accelerators and irradiation facilities. (author)

  6. Promoting Active Learning in Calculus and General Physics through Interactive and Media-Enhanced Lectures

    Directory of Open Access Journals (Sweden)

    Guoqing Tang

    2004-02-01

    Full Text Available In this paper we present an approach of incorporating interactive and media-enhanced lectures to promote active learning in Calculus and General Physics courses. The pedagogical practice of using interactive techniques in lectures to require "heads-on" and "hands-on" learning, and involve students more as active participants than passive receivers is a part of academic curricular reform efforts undertaken currently by the mathematics, physics and chemistry departments at North Carolina A&T State University under the NSF funded project "Talent-21: Gateway for Advancing Science and Mathematics Talents."

  7. Active Teachers - Active Students

    DEFF Research Database (Denmark)

    as an initiative from the Polytechnic in Nantes, France and the University the Los Andes in Bogota, Colombia. The objective was to start a world wide collaboration allowing teachers in engineering to learn from each other about their experiences with active learning. In this thirteenth edition, ALE joins forces...... with the International Research Symposium on Problem Based Learning (IRSPB) and the International Symposium on Project Approaches in Engineering Education (PAEE) to organise the first International Joint Conference on the Learner in Engineering Education (IJCLEE 2015) hosted by Mondragon University, in San Sebastian...

  8. Is activation analysis still active?

    International Nuclear Information System (INIS)

    Chai Zhifang

    2001-01-01

    This paper reviews some aspects of neutron activation analysis (NAA), covering instrumental neutron activation analysis (INAA), k 0 method, prompt gamma-ray neutron activation analysis (PGNAA), radiochemical neutron activation analysis (RNAA) and molecular activation analysis (MAA). The comparison of neutron activation analysis with other analytical techniques are also made. (author)

  9. An Activity Promoting the Practice of Quantitative Literacy for Pre– and In–Service Teachers of Mathematics and Science

    OpenAIRE

    Timothy L. Sorey; Teri Willard; Duane Sholz

    2010-01-01

    The purpose of this article is to describe a hands-on, laboratory activity that provided pre-service teachers in mathematics and science methods courses, and also some in-service mathematics teachers, with the opportunity to exercise quantitative literacy (QL) skills. The focus of the activity is electrical resistance, more particularly the resistance (in ohms) that is painted on small resistors by the use of color-coded bands, one of which is a band for % error. The activity consists of four...

  10. Astronomy Outreach Activities for Special Needs Children and Their Families

    Science.gov (United States)

    Lubowich, D.

    2010-08-01

    I present the results of two NASA-IDEAS/STScI sponsored astronomy outreach programs for seriously ill children and their families staying at the Ronald McDonald House of Long Island (New Hyde Park, NY) and for children hospitalized at the Children's Medical Center, Winthrop University Hospital (Mineola, NY). These programs are designed for children of all ages and include STSCi's Tonight's Sky (monthly guide to the sky); telescope observations of the Moon, Sun, planets, nebulae, and stars; and hands-on activities. During cloudy weather remote/robotic telescope observations are shown. Edible demonstrations using chocolate, marshmallows, and popcorn are used to stimulate interest. The staff at the Ronald McDonald House and Children's Medical Center are being trained to use the telescope and to do demonstrations. These educational activities help children and their families learn about astronomy while providing a diversion to take their minds off their illness during a stressful time.

  11. Companion classroom activities for "stop faking it!" force and motion

    CERN Document Server

    Robertson, William C

    2011-01-01

    Never has it been so easy for educators to learn to teach physical science with confidence. Award-winning author Bill Robertson launched his bestselling Stop Faking It! series in 2002 with Force and Motion--offering elementary and middle school teachers a jargon-free way to learn the background for teaching physical science with confidence. Combining easy-to-understand if irreverent explanations and quirky diagrams, Stop Faking It! Force and Motion helped thousands of teachers, parents, and homeschoolers conquer topics from Newton s laws to the physics of space travel. Now Companion Classroom Activities for Stop Faking It! Force and Motion proves an ideal supplement to the original book or a valuable resource of its own. The hands-on activities and highly readable explanations allow students to first investigate concepts, then discuss learned concepts, and finally apply the concepts to everyday situations. Robertson's wit and humor are sure to keep students and teachers entertained while they tackle topics ...

  12. Activated Charcoal

    Science.gov (United States)

    Common charcoal is made from peat, coal, wood, coconut shell, or petroleum. “Activated charcoal” is similar to common charcoal, but is made especially for use as a medicine. To make activated charcoal, manufacturers heat common ...

  13. Active ageing

    Directory of Open Access Journals (Sweden)

    Frode F. Jacobsen

    2017-09-01

    Full Text Available Background: The concept of active ageing has been gaining prominence in the Nordic countries and beyond. This has been reflected in policy papers in Norway and other Nordic nations. Aims: The aim of this article is to analyse the topic of active ageing in five Norwegian White Papers (2002 to 2015 and discuss those policy documents in context of relevant research literature. Methods: A qualitative document analyses is employed focusing on how active ageing, and ageing in general, is described and which concepts are employed. No ethical approval was needed. Findings: The general theme of ageing and the specific theme of active ageing are increasingly prominent in the Norwegian White Papers studied. In all documents, some assumptions regarding ageing and active ageing seem implicit, such as independence being more important than (interdependence. ‘Productive’ activities like participation in working life are stressed, while others, like reading, watching TV or watching children playing in the street, are ignored. Conclusions: The policy documents demonstrate that the topic of active ageing is growing in importance. The documents increasingly seem to stress ‘productive’ activities – those related to working life, voluntary work or sports and physical training. They exclude activities that are meaningful for many older people, like watching their grandchildren play or reading books. Implications for practice: Practitioners in older people’s care could consider reflecting on: Government documents dealing with their own practice The prevalent concept of active ageing The trend of active ageing as a facilitating or hindering factor for good care work How present discourse on active ageing may influence their attitude towards frail older persons How they wish to relate to active ageing in their own practice

  14. Physical Activity

    DEFF Research Database (Denmark)

    Andersen, Lars Bo; Anderssen, Sigmund Alfred; Wisløff, Ulrik

    2014-01-01

    Andersen LB, Anderssen SA, Wisløff U, Hellénius M-L, Fogelholm M, Ekelund U. (Expert Group) Nordic Nutrition Recommendations 2012. Integrating nutrition and physical activity. Chapter: Physical Activity p. 195-217.Nordic Counsil of Ministers.......Andersen LB, Anderssen SA, Wisløff U, Hellénius M-L, Fogelholm M, Ekelund U. (Expert Group) Nordic Nutrition Recommendations 2012. Integrating nutrition and physical activity. Chapter: Physical Activity p. 195-217.Nordic Counsil of Ministers....

  15. Suited for spacewalking: Teacher's guide with activities for physical and life science

    Science.gov (United States)

    Vogt, Gregory L.; Manning, Cheryl A.; Rosenberg, Carla B.

    1994-01-01

    Space walking has captured the imagination of generations of children and adults since science-fiction authors first placed their characters on the Moon. This publication is an activity guide for teachers interested in using the intense interest many children have in space exploration as a launching point for exciting hands-on learning opportunities. The guide begins with brief discussions of the space environment, the history of space walking, the Space Shuttle spacesuit, and working in space. These are followed by a series of activities that enable children to explore the space environment as well as the science and technology behind the functions of spacesuits. The activities are not rated for specific grade levels because they can be adapted for students of many ages. The chart on curriculum application at the back of the book is designed to help teachers incorporate activities into various subject areas.

  16. Project VISION (Very Intensive Scientific Intercurricular On-Site Education

    Science.gov (United States)

    Roig, Gustavo A.

    1999-01-01

    Project VISION (Very Intensive Scientific Intercurricular On-Site Education) is a joint effort among NASA/John F. Kennedy Space Center, Florida International University, Universidad del Turabo, Miami-Dade County Public Schools and the Caguas/Gurabo Public Schools in Puerto Rico. The project's main mission is to institutionalize change among the elementary and middle school science and math teachers at participating schools so that their students receive continuously enriched instruction in the principles of science and math through the use of hands-on and minds-on experiments called learning modules. These leaming modules incorporate the national science and math education standards provided by the National Committee on Science Education Standards and Assessments and the National Council of Teachers of Mathematics, respectively. The use of learning modules that require hands-on and minds-on activities in a classroom setting garners great enthusiasm and motivation on the part of the target students for the understanding of the lesson's underlying math and science principles. With this enthusiasm and motivation, comes acceptance, attention, participation, discipline, acquiescence, and collaboration. Additionally, the use of hands-on activities may also require learning through a gamut of senses. Not only can the student use his/her eyes and ears during these activities, but most times, they can also use their senses of touch, smell, and taste, as well as intuition. Learning is, therefore, achieved using most or all the human senses. The combination of motivation/enthusiasm and the use of multiple senses creates an ideal environment conducive to leaming at a profound level.

  17. Activity report

    International Nuclear Information System (INIS)

    1990-11-01

    The Department of Physics and Measurement Technology, Biology and Chemistry (IFM) presents every year a progress report containing a brief description of activities in research and education within the department. The report is intended as an information for colleagues and institutions. The present report contains activities for the academic year July 1989 to June 1990

  18. Central Limit Theorem: New SOCR Applet and Demonstration Activity

    Science.gov (United States)

    Dinov, Ivo D.; Christou, Nicolas; Sanchez, Juana

    2011-01-01

    Modern approaches for information technology based blended education utilize a variety of novel instructional, computational and network resources. Such attempts employ technology to deliver integrated, dynamically linked, interactive content and multifaceted learning environments, which may facilitate student comprehension and information retention. In this manuscript, we describe one such innovative effort of using technological tools for improving student motivation and learning of the theory, practice and usability of the Central Limit Theorem (CLT) in probability and statistics courses. Our approach is based on harnessing the computational libraries developed by the Statistics Online Computational Resource (SOCR) to design a new interactive Java applet and a corresponding demonstration activity that illustrate the meaning and the power of the CLT. The CLT applet and activity have clear common goals; to provide graphical representation of the CLT, to improve student intuition, and to empirically validate and establish the limits of the CLT. The SOCR CLT activity consists of four experiments that demonstrate the assumptions, meaning and implications of the CLT and ties these to specific hands-on simulations. We include a number of examples illustrating the theory and applications of the CLT. Both the SOCR CLT applet and activity are freely available online to the community to test, validate and extend (Applet: http://www.socr.ucla.edu/htmls/SOCR_Experiments.html and Activity: http://wiki.stat.ucla.edu/socr/index.php/SOCR_EduMaterials_Activities_GeneralCentralLimitTheorem). PMID:21833159

  19. Power to Production: Activity Guide.

    Science.gov (United States)

    Massachusetts Univ., Lowell. Tsongas Industrial History Center.

    This field trip program consists of a 90-minute interpretive tour and a 90-minute hands-on workshop. The tour and workshop explore the role of water power in the Industrial Revolution. On the tour, students discover firsthand the unique resources of Lowell, Massachusetts, and the Park, while the workshop brings these historic resources to life as…

  20. Investigating students' mental models and knowledge construction of microscopic friction. II. Implications for curriculum design and development

    Science.gov (United States)

    Corpuz, Edgar D.; Rebello, N. Sanjay

    2011-12-01

    Our previous research showed that students’ mental models of friction at the atomic level are significantly influenced by their macroscopic ideas. For most students, friction is due to the meshing of bumps and valleys and rubbing of atoms. The aforementioned results motivated us to further investigate how students can be helped to improve their present models of microscopic friction. Teaching interviews were conducted to study the dynamics of their model construction as they interacted with the interviewer, the scaffolding activities, and/or with each other. In this paper, we present the different scaffolding activities and the variation in the ideas that students generated as they did the hands-on and minds-on scaffolding activities. Results imply that through a series of carefully designed scaffolding activities, it is possible to facilitate the refinement of students’ ideas of microscopic friction.

  1. UniSchooLabs Toolkit: Tools and Methodologies to Support the Adoption of Universities’ Remote and Virtual Labs in Schools

    Directory of Open Access Journals (Sweden)

    Augusto Chioccariello

    2012-11-01

    Full Text Available The UniSchooLabs project aims at creating an infrastructure supporting web access to remote/virtual labs and associated educational resources to engage learners with hands-on and minds-on activities in science, technology and math in schools. The UniSchooLabs tool-kit supports the teacher in selecting a remote or virtual lab and developing a lab activity based on an inquiry model template. While working with the toolkit the teacher has access to three main features: a a catalogue of available online laboratories; b an archive of activities created by other users; c a tool for creating new activities or reusing existing ones.

  2. Investigating students’ mental models and knowledge construction of microscopic friction. II. Implications for curriculum design and development

    Directory of Open Access Journals (Sweden)

    Edgar D. Corpuz

    2011-07-01

    Full Text Available Our previous research showed that students’ mental models of friction at the atomic level are significantly influenced by their macroscopic ideas. For most students, friction is due to the meshing of bumps and valleys and rubbing of atoms. The aforementioned results motivated us to further investigate how students can be helped to improve their present models of microscopic friction. Teaching interviews were conducted to study the dynamics of their model construction as they interacted with the interviewer, the scaffolding activities, and/or with each other. In this paper, we present the different scaffolding activities and the variation in the ideas that students generated as they did the hands-on and minds-on scaffolding activities. Results imply that through a series of carefully designed scaffolding activities, it is possible to facilitate the refinement of students’ ideas of microscopic friction.

  3. [Active euthanasia].

    Science.gov (United States)

    Folker, A P; Hvidt, N

    1995-02-20

    The growing interest in the subject of active euthanasia in connection with the debate regarding legalization of such practices in Denmark necessitates taking a definite standpoint. The difference in concept between active and passive euthanasia is stressed, and the Dutch guidelines are reviewed. The article discusses how far the patient's autonomy should go, as it regards the consideration of self-determination as being too narrow a criterion in itself. The discussion on the quality of life is included, and the consequences of the process of expulsion as a sociological concept are considered--the risk of a patient feeling guilty for being alive and therefore feeling compelled to request active euthanasia. The changed function of the physician is underlined, and it is discussed whether active euthansia will cause a breach of confidence between the physician and his patient. In connection with the debate the following tendencies in society are emphasized: lack of clarity, increasing medicalization and utilitarian priorities.

  4. Exploring Connections Between Earth Science and Biology - Interdisciplinary Science Activities for Schools

    Science.gov (United States)

    Vd Flier-Keller, E.; Carolsfeld, C.; Bullard, T.

    2009-05-01

    To increase teaching of Earth science in schools, and to reflect the interdisciplinary nature and interrelatedness of science disciplines in today's world, we are exploring opportunities for linking Earth science and Biology through engaging and innovative hands-on science activities for the classroom. Through the NSERC-funded Pacific CRYSTAL project based at the University of Victoria, scientists, science educators, and teachers at all levels in the school system are collaborating to research ways of enriching the preparation of students in math and science, and improving the quality of science education from Kindergarten to Grade 12. Our primary foci are building authentic, engaging science experiences for students, and fostering teacher leadership through teacher professional development and training. Interdisciplinary science activities represent an important way of making student science experiences real, engaging and relevant, and provide opportunities to highlight Earth science related topics within other disciplines, and to expand the Earth science taught in schools. The Earth science and Biology interdisciplinary project builds on results and experiences of existing Earth science education activities, and the Seaquaria project. We are developing curriculum-linked activities and resource materials, and hosting teacher workshops, around two initial areas; soils, and marine life and the fossil record. An example activity for the latter is the hands-on examination of organisms occupying the nearshore marine environment using a saltwater aquarium and touch tank or beach fieldtrip, and relating this to a suite of marine fossils to facilitate student thinking about representation of life in the fossil record e.g. which life forms are typically preserved, and how are they preserved? Literacy activities such as fossil obituaries encourage exploration of paleoenvironments and life habits of fossil organisms. Activities and resources are being tested with teachers

  5. Incorporating Student Activities into Climate Change Education

    Science.gov (United States)

    Steele, H.; Kelly, K.; Klein, D.; Cadavid, A. C.

    2013-12-01

    Under a NASA grant, Mathematical and Geospatial Pathways to Climate Change Education, students at California State University, Northridge integrated Geographic Information Systems (GIS), remote sensing, satellite data technologies, and climate modelling into the study of global climate change under a Pathway for studying the Mathematics of Climate Change (PMCC). The PMCC, which is an interdisciplinary option within the BS in Applied Mathematical Sciences, consists of courses offered by the departments of Mathematics, Physics, and Geography and is designed to prepare students for careers and Ph.D. programs in technical fields relevant to global climate change. Under this option students are exposed to the science, mathematics, and applications of climate change science through a variety of methods including hands-on experience with computer modeling and image processing software. In the Geography component of the program, ESRI's ArcGIS and ERDAS Imagine mapping, spatial analysis and image processing software were used to explore NASA satellite data to examine the earth's atmosphere, hydrosphere and biosphere in areas that are affected by climate change or affect climate. These technology tools were incorporated into climate change and remote sensing courses to enhance students' knowledge and understanding of climate change through hands-on application of image processing techniques to NASA data. Several sets of exercises were developed with specific learning objectives in mind. These were (1) to increase student understanding of climate change and climate change processes; (2) to develop student skills in understanding, downloading and processing satellite data; (3) to teach remote sensing technology and GIS through applications to climate change; (4) to expose students to climate data and methods they can apply to solve real world problems and incorporate in future research projects. In the Math and Physics components of the course, students learned about

  6. Information activities and resources in an episode of gourmet cooking

    Directory of Open Access Journals (Sweden)

    J. Hartel

    2006-01-01

    Full Text Available Introduction. This paper contributes to what is known about everyday life information seeking within serious leisure. It is the first case study of a making and tinkering (or craft hobby, gourmet cooking. The central activity of the hobby is described and serves as a context to relate and locate information activities and information resources. Method. In this scientific ethnography, twenty gourmet cooks from Boston and Los Angeles, USA were interviewed in their homes about their pursuit of the hobby and its associated information phenomena. Then, domestic culinary information resources and spaces were documented via a photographic inventory. Analysis. Interview transcripts and field notes were studied for themes through an iterative process of inductive and deductive analysis. A visual analysis process was performed on the photographs. Results. Hands-on cooking takes the form of a nine step episode. Information activities and resources are instrumental, interwoven, and varied across the process. In any cooking episode use and re-use are the prevailing information activities; the hobbyist is an active producer and manager of information; and the recipe is a primary document. Conclusion. The study demonstrates how to explicate and conceptualize information phenomena in serious leisure, and sets up lines of inquiry to explore in future research.

  7. Minds on replay: musical hallucinations and their relationship to neurological disease.

    Science.gov (United States)

    Golden, Erin C; Josephs, Keith A

    2015-12-01

    The phenomenon of musical hallucinations, in which individuals perceive music in the absence of an external auditory stimulus, has been described sparingly in the literature through small case reports and series. Musical hallucinations have been linked to multiple associated conditions, including psychiatric and neurologic disease, brain lesions, drug effect, and hearing impairment. This study aimed to review the demographics of subjects with musical hallucinations and to determine the prevalence of neurological disorders, particularly neurodegenerative disease. Through the Mayo medical record, 393 subjects with musical hallucinations were identified and divided into five categories based on comorbid conditions that have been associated with musical hallucinations: neurological, psychiatric, structural, drug effect and not otherwise classifiable. Variables, including hearing impairment and the presence of visual and other auditory hallucinations, were evaluated independently in all five groups. The mean age at onset of the hallucinations was 56 years, ranging from 18 to 98 years, and 65.4% of the subjects were female. Neurological disease and focal brain lesions were found in 25% and 9% of the total subjects, respectively. Sixty-five subjects were identified with a neurodegenerative disorder, with the Lewy body disorders being the most common. Visual hallucinations were more common in the group with neurological disease compared to the psychiatric, structural, and not otherwise classifiable groups (P < 0.001), whereas auditory hallucinations were more common in the psychiatric group compared to all other groups (P < 0.001). Structural lesions associated with musical hallucinations involved both hemispheres with a preference towards the left, and all but two included the temporal lobe. Hearing impairment was common, particularly in the not otherwise classifiable category where 67.2% had documented hearing impairment, more than in any other group (P < 0.001). Those with an underlying neurodegenerative disorder or isolated hearing impairment tended to hear more persistent music, which was often religious and patriotic compared to those with a structural lesion, where more modern music was heard, and those with psychiatric disorders where music was mood-congruent. This case series shows that musical hallucinations can occur in association with a wide variety of conditions, of which neurological disease and brain lesions represent a substantial proportion, and that Lewy body disorders are the most commonly associated neurodegenerative diseases. A future prospective study would be helpful to further delineate an association between musical hallucinations and neurodegenerative disease. © The Author (2015). Published by Oxford University Press on behalf of the Guarantors of Brain. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Why Even Mind? -- On The A Priori Value Of “Life”

    Directory of Open Access Journals (Sweden)

    Amien Kacou

    2008-10-01

    Full Text Available span style="font-size: 12pt; font-family: Arial"span style="font-weight: normal; font-size: 12pt; text-decoration: none"font face="Times New Roman"span style="font-size: 12pt; font-family: #39;Times New Roman#39;"This article presentsnbsp;an analysis of the matter of the ldquo;meaningrdquo; of life in terms of whether it should even be lived in the first place. It begins with an attempt at defining the question as an inquiry on the ema priori/em value of attention in general, and develops into an axiological reflection distantly inspired from Martin Heideggerrsquo;s notion of ldquo;care.rdquo; The main objective of the article is (1 to ldquo;answerrdquo; the question (or to proceed as if the question could be answered objectively by ldquo;playing alongrdquo; with its naiuml;ve logicmdash;that is, by finding a basis for comparing the good that can be found ema priori/em in life (mainly, pleasure with the good that can be found ema priori/em in death (mainly, the absence of painmdash;and, then, (2 to suggest why we have no good reason to feel dissatisfied with where this leaves us (i.e., possibly facing a certain specter of ethical foundationalism: the question of the ldquo;value of valuerdquo;. Its basic conclusion is, assuming we are committed to assigning value to life emin general/em, that we should be able to say that life is good emirrespective of /emany explanation for its existence./span/font/span/span

  9. Turning Minds On and Faucets Off: Water Conservation Education in Jordanian Schools.

    Science.gov (United States)

    Middlestadt, Susan; Grieser, Mona; Hernandez, Orlando; Tubaishat, Khulood; Sanchack, Julie; Southwell, Brian; Schwartz, Reva

    2001-01-01

    An evaluation was conducted to measure the impact of a curriculum implemented through the Jordan Water Conservation Education Project. Examines the effect of recommending water conservation at the household level and the impact of using interactive teaching methods to promote conservation behaviors among students and their families. (Author/SAH)

  10. Meditating Mothers And Fathers: Long-Term Meditators' Perceptions Of The Influences Of Mindfulness On Parenting

    OpenAIRE

    Hornstein, Eve

    2011-01-01

    While there is a growing body of research to expand our theoretical and conceptual understanding of the multi-faceted construct mindfulness, the majority of studies have thus far focused on the efficacy of short-term mindfulness-based interventions to mitigate symptoms associated with myriad physiological and psychological conditions. Research investigating the relational effects of mindfulness within families is limited. This qualitative study examined eight long-term meditators' perceptions...

  11. The canary in the mind: on the fate of dreams in psychoanalysis and in contemporary culture.

    Science.gov (United States)

    Lippmann, Paul

    2006-06-01

    Dreams have been central in the birth and evolution of psychoanalysis. This paper explores the remarkable story of the relationship between dreams and psychoanalysis as a modern version of the long history of dreams in most healing traditions. But psychoanalysis seems to have turned away from dreams as central inspiration in a way parallel to the general culture's turn away from dreams and the reality of inner life. Yet modern postindustrial culture is transfixed by a version of "dream life" in ways just beginning to be understood (e.g., in the transformation of ancient interest in the inner screen to the external screen). Working with dreams in psychoanalytic psychotherapy was a creative and revolutionary act for our forebears. It is even more so today, in ways that are discussed in this paper.

  12. The direct and indirect benefits of dispositional mindfulness on self-esteem and social anxiety.

    Science.gov (United States)

    Rasmussen, Michael K; Pidgeon, Aileen M

    2011-03-01

    The current study investigated relationships between dispositional mindfulness, self-esteem, and social anxiety using self-report measures. Correlational data were collected from 205 Australian undergraduate students who completed the Mindful Attention Awareness Scale (MAAS), the Rosenberg Self-Esteem Scale (RSES), and the Social Interaction Anxiety Scale (SIAS). Mindfulness significantly predicted high levels of self-esteem and low levels of social anxiety. Mediation analysis supported the role of self-esteem as a partial mediator between mindfulness and social anxiety. Clinical implications and suggestions for future research are discussed.

  13. The impact of mindfulness on leadership effectiveness in a health care setting: a pilot study.

    Science.gov (United States)

    Wasylkiw, Louise; Holton, Judith; Azar, Rima; Cook, William

    2015-01-01

    The purpose of this paper is to examine the impact of mindfulness awareness practice (MAP) on mid-level health-care managers' leadership. In total, 11 mid-level health-care managers in eastern Canada took part in an intensive weekend retreat and a follow-up webinar on mindfulness awareness. Perceived stress and leadership effectiveness were assessed pre- and post-intervention (i.e. four and eight weeks). A control group (n=10) also completed the same measures twice. Additionally, informants (n=28) provided assessments of participants' leadership pre- and post-intervention. Follow-up interviews were carried out with eight participants 12-16 weeks post-intervention. In comparison to controls, retreat participants showed significant increases in mindfulness and corresponding decreases in stress that were sustained across eight weeks post-retreat; retreat participants reported significant positive changes in their leadership effectiveness that were corroborated by informants. Qualitative data, however, suggest that sustaining a mindfulness practice presents significant challenges to middle managers in a health care setting. The findings are useful to management working in health services that are plagued by increasing demands and changes. Despite the small sample and lack of random assignment, the pilot data support the efficacy of MAP in improving leadership. Little empirical research supports the claim that MAP enhances leadership. The present study employed a mixed methods approach to address this gap and demonstrates the potential benefits of MAP among mid-level managers.

  14. Retrocausation in quantum mechanics and the effects of minds on the creation of physical reality

    Science.gov (United States)

    Stapp, Henry P.

    2017-05-01

    The classical physical theories that prevailed in science from the time of Isaac Newton until the dawn of the twentieth century were empirically based on human experience and made predictions about our mental experiences, yet excluded from the dynamics all mental properties. But how can one rationally get mental things out if no mental elements are put in? The key step in the creation of quantum mechanics during 1925 by Heisenberg and his colleagues was to recognize and emphasize the essential dynamical role of mental properties in the creation of our mental empirical findings. This basic feature of quantum mechanics was cast into rigorous mathematical form by John von Neumann, and was made a central feature of contemporary relativistic quantum field theory by the work of Tomonaga and Schwinger. That theory is causally strictly forward in time. But it is explained here how it can nevertheless accommodate the seeming backward-in-time causal effects reported by D.J. Bem, and many others, by means of a slight biasing of the famous Born Rule. The purpose of this communication is to explain how those reported retrocausal findings can be explained by a strictly forward-in-time and nearly orthodox causal dynamics that, however, permits the Born Rule to be slightly biased under certain conditions. A feasible experiment is proposed that, if it gives the outcomes predicted by the proposed theory, will provide evidence in favor of this causally forward-in-time and nearly orthodox explanation of the reported retrocausal effects.

  15. Longitudinal Effects of Theory of Mind on Later Peer Relations: The Role of Prosocial Behavior

    Science.gov (United States)

    Caputi, Marcella; Lecce, Serena; Pagnin, Adriano; Banerjee, Robin

    2012-01-01

    Children's peer relations represent a key aspect of school adjustment. However, little is known about their social-cognitive precursors. To address this gap, the authors followed 70 children across the transition to primary school. At Time 1 (age 5), Time 2 (age 6), and Time 3 (age 7), children were assessed on their theory of mind, prosocial…

  16. Dynamic assembly of MinD on phospholipid vesicles regulated by ATP and MinE

    OpenAIRE

    Hu, Zonglin; Gogol, Edward P.; Lutkenhaus, Joe

    2002-01-01

    Selection of the division site in Escherichia coli is regulated by the min system and requires the rapid oscillation of MinD between the two halves of the cell under the control of MinE. In this study we have further investigated the molecular basis for this oscillation by examining the interaction of MinD with phospholipid vesicles. We found that MinD bound to phospholipid vesicles in the presence of ATP and, upon binding, assembled into a well-ordered helical array that deformed the vesicle...

  17. The Buffering Effect of Mindfulness on Abusive Supervision and Creative Performance: A Social Cognitive Framework.

    Science.gov (United States)

    Zheng, Xiaoming; Liu, Xin

    2017-01-01

    Our research draws upon social cognitive theory and incorporates a regulatory approach to investigate why and when abusive supervision influences employee creative performance. The analyses of data from multiple time points and multiple sources reveal that abusive supervision hampers employee self-efficacy at work, which in turn impairs employee creative performance. Further, employee mindfulness buffers the negative effects of abusive supervision on employee self-efficacy at work as well as the indirect effects of abusive supervision on employee creative performance. Our findings have implications for both theory and practice. Limitations and directions for future research are also discussed.

  18. The Buffering Effect of Mindfulness on Abusive Supervision and Creative Performance: A Social Cognitive Framework

    OpenAIRE

    Zheng, Xiaoming; Liu, Xin

    2017-01-01

    Our research draws upon social cognitive theory and incorporates a regulatory approach to investigate why and when abusive supervision influences employee creative performance. The analyses of data from multiple time points and multiple sources reveal that abusive supervision hampers employee self-efficacy at work, which in turn impairs employee creative performance. Further, employee mindfulness buffers the negative effects of abusive supervision on employee self-efficacy at work as well as ...

  19. The Buffering Effect of Mindfulness on Abusive Supervision and Creative Performance: A Social Cognitive Framework

    Directory of Open Access Journals (Sweden)

    Xiaoming Zheng

    2017-09-01

    Full Text Available Our research draws upon social cognitive theory and incorporates a regulatory approach to investigate why and when abusive supervision influences employee creative performance. The analyses of data from multiple time points and multiple sources reveal that abusive supervision hampers employee self-efficacy at work, which in turn impairs employee creative performance. Further, employee mindfulness buffers the negative effects of abusive supervision on employee self-efficacy at work as well as the indirect effects of abusive supervision on employee creative performance. Our findings have implications for both theory and practice. Limitations and directions for future research are also discussed.

  20. Enjoying food without caloric cost: The impact of brief mindfulness on laboratory eating outcomes.

    Science.gov (United States)

    Arch, Joanna J; Brown, Kirk Warren; Goodman, Robert J; Della Porta, Matthew D; Kiken, Laura G; Tillman, Shanna

    2016-04-01

    Mindfulness-based interventions have been increasingly applied to treat eating-related problems ranging from obesity to eating disorders. Yet few studies have empirically examined the mechanisms of a mindful approach to eating. The current studies examine the potential of brief mindfulness instructions to enhance the psychological and behavioral dimensions of eating. In three experiments (total N = 319 undergraduates), we examined whether brief mindfulness instructions would enhance the positive sensory experience involved in tasting food as well as healthy eating behaviors. Relative to distraction control instructions, the first two studies demonstrated that brief mindfulness instructions increased the enjoyment of a commonly pleasurable food (chocolate; Study 1), and a food with generally more mixed associations (raisins; Study 2). The third study replicated and extended these findings to show that brief mindfulness instructions also led to lower calorie consumption of unhealthy food relative to distracted or no-instruction control conditions, an effect mediated by greater eating enjoyment. Findings demonstrated the power of brief mindfulness instructions to positively impact both health-relevant behavior and sensory experience associated with eating food. Implications for both theory and clinical applications of mindfulness are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Comparison of the components of mindfulness on Stimulant and opiate addicts

    Directory of Open Access Journals (Sweden)

    Sayeadyounes Mohammadi

    2016-07-01

    Full Text Available Background: Phenomenon of addiction as one of the social problem have the high prevalence, especially among youth. Study and scientific cognition of mental and psychological components of addicts is very important in order to help them to compatibility and reduce their psychological problem. Therefore, the aim of present study was to comparison of mindfulness components on stimulant and opiate addicts. Materials & Methods: In this study 60 addicts (30 opiate addicts and 30 stimulants addicts were studied by using Five Factor Mindfulness Questionnaire (FFMQ. Data were analyzed by using multivariate analysis of variance (MANOVA. Results: findings showed that there was a significant difference between opiate and stimulant addicts in mindfulness components. Conclusion: results illustrated that the opiate addicts gained higher scores than stimulant addicts in mindfulness components. The results also emphasized that mindfulness components are as determinant variable in opiate and stimulant addicts pathology.

  2. Lower activation materials and magnetic fusion reactors

    International Nuclear Information System (INIS)

    Conn, R.W.; Bloom, E.E.; Davis, J.W.; Gold, R.E.; Little, R.; Schultz, K.R.; Smith, D.L.; Wiffen, F.W.

    1984-01-01

    Radioactivity in fusion reactors can be effectively controlled by materials selection. The detailed relationship between the use of a material for construction of a magnetic fusion reactor and the material's characteristics important to waste disposal, safety, and system maintainability has been studied. The quantitative levels of radioactivation are presented for many materials and alloys, including the role of impurities, and for various design alternatives. A major outcome has been the development of quantitative definitions to characterize materials based on their radioactivation properties. Another key result is a four-level classification scheme to categorize fusion reactors based on quantitative criteria for waste management, system maintenance, and safety. A recommended minimum goal for fusion reactor development is a reference reactor that (a) meets the requirements for Class C shallow land burial of waste materials, (b) permits limited hands-on maintenance outside the magnet's shield within 2 days of a shutdown, and (c) meets all requirements for engineered safety. The achievement of a fusion reactor with at least the characteristics of the reference reactor is a realistic goal. Therefore, in making design choices or in developing particular materials or alloys for fusion reactor applications, consideration must be given to both the activation characteristics of a material and its engineering practicality for a given application

  3. Extravehicular Activity Systems Education and Public Outreach in Support of NASA's STEM Initiatives

    Science.gov (United States)

    Paul, Heather L.

    2011-01-01

    The exploration activities associated with NASA?s goals to return to the Moon, travel to Mars, or explore Near Earth Objects (NEOs) will involve the need for human-supported space and surface extravehicular activities (EVAs). The technology development and human element associated with these exploration missions provide fantastic content to promote science, technology, engineering, and math (STEM). As NASA Administrator Charles F. Bolden remarked on December 9, 2009, "We....need to provide the educational and experiential stepping-stones to inspire the next generation of scientists, engineers, and leaders in STEM fields." The EVA Systems Project actively supports this initiative by providing subject matter experts and hands-on, interactive presentations to educate students, educators, and the general public about the design challenges encountered as NASA develops EVA hardware for these missions. This paper summarizes these education and public efforts.

  4. How an active-learning class influences physics self-efficacy in pre-service teachers

    Science.gov (United States)

    Gaffney, Jon D. H.; Housley Gaffney, Amy L.; Usher, Ellen L.; Mamaril, Natasha A.

    2013-01-01

    Education majors in an inquiry-based physics content course were asked to reflect on the ways the course affected their self-efficacy for completing physics tasks, such as creating a circuit. Responses were coded according to the contributor of the influence and whether that influence was positive or negative. The group learning structure, hands-on activities in the class, and the constructed repertoire of science knowledge, processes, and activities, were all reported to be positive influences on self-efficacy, whereas the influence of the instructor was mixed. Overall, students' responses indicated both a desire for more guidance and lecture and an appreciation for their ability to construct their own understanding through the class activities.

  5. Active colloids

    International Nuclear Information System (INIS)

    Aranson, Igor S

    2013-01-01

    A colloidal suspension is a heterogeneous fluid containing solid microscopic particles. Colloids play an important role in our everyday life, from food and pharmaceutical industries to medicine and nanotechnology. It is useful to distinguish two major classes of colloidal suspensions: equilibrium and active, i.e., maintained out of thermodynamic equilibrium by external electric or magnetic fields, light, chemical reactions, or hydrodynamic shear flow. While the properties of equilibrium colloidal suspensions are fairly well understood, active colloids pose a formidable challenge, and the research is in its early exploratory stage. One of the most remarkable properties of active colloids is the possibility of dynamic self-assembly, a natural tendency of simple building blocks to organize into complex functional architectures. Examples range from tunable, self-healing colloidal crystals and membranes to self-assembled microswimmers and robots. Active colloidal suspensions may exhibit material properties not present in their equilibrium counterparts, e.g., reduced viscosity and enhanced self-diffusivity, etc. This study surveys the most recent developments in the physics of active colloids, both in synthetic and living systems, with the aim of elucidation of the fundamental physical mechanisms governing self-assembly and collective behavior. (physics of our days)

  6. Physics activities

    International Nuclear Information System (INIS)

    1997-09-01

    As we move into the 21st Century, nuclear technology is on the verge of rejuvenation in advanced Member States and of expansion in developing Member States. The principal responsibilities of the IAEA are transferring technologies, co-ordinating scientific research, managing specialized projects and maintaining analytical quality control. The IAEA physics activities provide assistance with nuclear instrumentation, promote more effective utilization of research reactors and accelerators, and facilitate global co-operation in nuclear fusion research. These activities will help Member States improve their standards of living through the benefits of nuclear technology. This booklet presents a brief profile on the physics activities and involvement in these fields of the Physics Section, IAEA

  7. Regulatory activities

    International Nuclear Information System (INIS)

    2001-01-01

    This publication, compiled in 8 chapters, presents the regulatory system developed by the Nuclear Regulatory Authority (NRA) of the Argentine Republic. The following activities and developed topics in this document describe: the evolution of the nuclear regulatory activity in Argentina; the Argentine regulatory system; the nuclear regulatory laws and standards; the inspection and safeguards of nuclear facilities; the emergency systems; the environmental systems; the environmental monitoring; the analysis laboratories on physical and biological dosimetry, prenatal irradiation, internal irradiation, radiation measurements, detection techniques on nuclear testing, medical program on radiation protection; the institutional relations with national and international organization; the training courses and meeting; the technical information

  8. Identity Activities

    Science.gov (United States)

    2016-08-03

    in reaction to their environment. They reflect an individual’s internal or external, conscious or subconscious , overt or covert, voluntary or...identity activities under a range of legal authorities, policy constraints, transnational threats, regional concerns and biases , and most likely...Biography. A baseline and descriptive analytic product that supports the development of the behavioral influences analysis ( BIA ) individual behavioral

  9. Active instruments

    DEFF Research Database (Denmark)

    Lim, Miguel Antonio; Ørberg, Jakob Williams

    2017-01-01

    themselves. We draw on two multi-year field studies of India and Denmark to investigate how national reforms and developments within the ranking industry interact in often surprising ways. Rankings do not always do what policy makers expect. We (1) highlight the activity of rankers in these two countries, (2...

  10. Active house

    DEFF Research Database (Denmark)

    Eriksen, Kurt Emil; Olesen, Gitte Gylling Hammershøj

    Formålet med dette abstrakt er at illustrere, at huse kan være konstrueret til at basere sig udelukkende på vedvarende energikilder og samtidig være CO2-neutrale og producere mere energi end de forbruger. Active House Visionen undersøger disse muligheder i otte demonstration huse i fem forskellige...

  11. Global projects and Astronomy awareness activities in Nepal

    Science.gov (United States)

    Gautam, Suman

    2015-08-01

    Modern astronomy is a crowning achievement of human civilization which inspires teenagers to choose career in science and technology and is a stable of adult education. It is a unique and cost effective tool for furthering sustainable global development because of its technological, scientific and cultural dimensions which allow us to reach with the large portion of the community interact with children and inspire with our wonderful cosmos.Using astronomy to stimulate quality and inspiring education for disadvantaged children is an important goal of Nepal Astronomical Society (NASO) since its inception. NASO is carrying out various awareness activities on its own and in collaboration with national and international organizations like Central Department of Physics Tribhuvan University (TU), International astronomical Union (IAU), Department of Physics Prithvi Narayan Campus Pokhara, Nepal academy of science and technology (NAST), Global Hands on Universe (GHOU), EU- UNAWE and Pokhara Astronomical Society (PAS) to disseminate those activities for the school children and teachers in Nepal. Our experiences working with kids, students, teachers and public in the field of universe Awareness Activities for the school children to minimize the abstruse concept of astronomy through some practical approach and the project like Astronomy for the visually impaired students, Galileo Teacher Training program and International School for young astronomers (ISYA) outskirts will be explained which is believed to play vital role in promoting astronomy and space science activities in Nepal.

  12. Active particles

    CERN Document Server

    Degond, Pierre; Tadmor, Eitan

    2017-01-01

    This volume collects ten surveys on the modeling, simulation, and applications of active particles using methods ranging from mathematical kinetic theory to nonequilibrium statistical mechanics. The contributing authors are leading experts working in this challenging field, and each of their chapters provides a review of the most recent results in their areas and looks ahead to future research directions. The approaches to studying active matter are presented here from many different perspectives, such as individual-based models, evolutionary games, Brownian motion, and continuum theories, as well as various combinations of these. Applications covered include biological network formation and network theory; opinion formation and social systems; control theory of sparse systems; theory and applications of mean field games; population learning; dynamics of flocking systems; vehicular traffic flow; and stochastic particles and mean field approximation. Mathematicians and other members of the scientific commu...

  13. Active-learning strategies: the use of a game to reinforce learning in nursing education. A case study.

    Science.gov (United States)

    Boctor, Lisa

    2013-03-01

    The majority of nursing students are kinesthetic learners, preferring a hands-on, active approach to education. Research shows that active-learning strategies can increase student learning and satisfaction. This study looks at the use of one active-learning strategy, a Jeopardy-style game, 'Nursopardy', to reinforce Fundamentals of Nursing material, aiding in students' preparation for a standardized final exam. The game was created keeping students varied learning styles and the NCLEX blueprint in mind. The blueprint was used to create 5 categories, with 26 total questions. Student survey results, using a five-point Likert scale showed that they did find this learning method enjoyable and beneficial to learning. More research is recommended regarding learning outcomes, when using active-learning strategies, such as games. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Active solar information dissemination activities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The principal objective of the project has been the development of an information dissemination strategy for the UK active solar heating industry. The project has also aimed to prepare the industry for the implementation of such a strategy and to produce initial information materials to support the early stages of the implementation process. (author)

  15. Hands-on Workshops Aim to Strengthen Tobacco Control Efforts in Indonesia

    Science.gov (United States)

    The Global Adult Tobacco Survey (GATS), conducted in 2011 by the Indonesian National Institute of Health Research and Development and the U.S. Center for Disease Control and Prevention, showed that more than 67% of men and almost 40% of boys aged 13-15 use tobacco.

  16. Teaching hands-on geophysics: examples from the Rū seismic network in New Zealand

    International Nuclear Information System (INIS)

    Van Wijk, Kasper; Simpson, Jonathan; Adam, Ludmila

    2017-01-01

    Education in physics and geosciences can be effectively illustrated by the analysis of earthquakes and the subsequent propagation of seismic waves in the Earth. Educational seismology has matured to a level where both the hard- and software are robust and user friendly. This has resulted in successful implementation of educational networks around the world. Seismic data recorded by students are of such quality that these can be used in classic earthquake location exercises, for example. But even ocean waves weakly coupled into the Earth’s crust can now be recorded on educational seismometers. These signals are not just noise, but form the basis of more recent developments in seismology, such as seismic interferometry, where seismic waves generated by ocean waves—instead of earthquakes—can be used to infer information about the Earth’s interior. Here, we introduce an earthquake location exercise and an analysis of ambient seismic noise, and present examples. Data are provided, and all needed software is freely available. (review)

  17. Law and Justice CTE Program Offers a Hands-On Approach to Learning

    Science.gov (United States)

    Klein, Jennifer

    2013-01-01

    Tom Washburn, founder of the Law and Justice Program in Fulton County Schools in Atlanta, Georgia, sees career and technical education (CTE) as a framework for gains in reading comprehension, public speaking, math and science. "It's a holistic approach to learning, framed by law and justice. Behind the scenes we're reading novels, improving…

  18. New ways of networking: A hands on workshop exploring the workspace:lab and its equipment

    DEFF Research Database (Denmark)

    Lundsgaard, Christina; Souza da Conceição, Carolina; Eriksson, Johanna

    2013-01-01

    Are you interested in designing new ways of networking at the Nordes conference with fellow researchers? Do you want to explore and discuss the so called “workspacelab” as a platform for user involvement? This workshop invites participants to explore a particular version of the design:lab called ...

  19. A hands-on approach to teaching environmental awareness and pollutant remediation to undergraduate chemistry students

    Science.gov (United States)

    Salman Ashraf, S.; Rauf, M. A.; Abdullah, Fatema H.

    2012-07-01

    Background : One of the unfortunate side effects of the industrial revolution has been the constant assault of the environment with various forms of pollution. Lately, this issue has taken a more critical dimension as prospects of global climate change and irreversible ecosystem damage are becoming a reality. Purpose : College graduates (especially chemists), should therefore not only be aware of these issues but also be taught how chemistry can help reduce environmental pollution. Furthermore, the role and importance of chemistry in sustainable development and solving environmental problems needs to be highlighted. Programme/intervention description : To this effect, we have designed a simple undergraduate experiment that is based on the green chemistry approach of using photolytic oxidation to degrade a model organic pollutant. This approach used UV light and hydrogen peroxide to produce reactive hydroxyl radicals, which subsequently break down and degrade Acridine Orange (model pollutant). The dye degradation was monitored spectrophotometrically and the apparent rate of decolouration was found to be first order. Possible radical initiated mechanisms that may be involved in this remediation experiment have been used to explain the observed dye decolouration. Sample : To test the usefulness of this newly developed experiment, we incorporated it as a module into a second year 'Professional skills' chemistry course with an enrollment of six female students. Anonymous survey of the students after the completion of the module was very positive and indicated that objectives of the experiment were satisfactorily achieved. Results : We believe this experiment not only raises students' awareness about green chemistry and environmental issues, but also teaches them valuable experimental skills such as experimental design, data manipulation and basic kinetics. Survey of students who were taught this unit in a second year course was very positive and supported the usefulness of this unit for chemistry students. Conclusions : In summary, we describe here an undergraduate chemistry experiments that was found to be very effective in teaching students about the hazards of environmental pollution and the role of green chemistry in solving 'real-life' problems, as well as chemical kinetics, data acquisition and manipulation.

  20. Promising Practices in Young Adult Employment: Hands-On Multidisciplinary Career Exploration and Mentorships

    Science.gov (United States)

    Wagner, Stacey

    2015-01-01

    The National Fund for Workforce Solution's Young Adult Initiatives aim to test and implement new strategies for targeting America's young adults and share this information so that employers and workforce development can join forces in investing in the millions of young adults across the nation. This case study focuses on promising findings from…

  1. A Focus on "Hands-On," Learner-Centered Technology at The Citadel

    Science.gov (United States)

    DeRoma, Virginia; Nida, Steve

    2004-01-01

    While advances in technology have enhanced the quality and variety of visual presentations in teaching, most instructors find themselves teaching to a generation of students who are difficult to dazzle. Although the innovative use of technology in and outside of the classroom is a challenge, selecting practices that optimize technology as a tool…

  2. Exposing Engineering Students to Renewable Energy through Hands-On Experiments

    Science.gov (United States)

    Yang, Yonggao; Li, Lin

    2013-01-01

    Renewable energy is the most rapidly growing discipline in today's business world and is commonly viewed as the main arena for research and development in various fields. This article summarizes the work and efforts of an educational project conducted at Prairie View A&M University (PVAMU). A major goal of the project was to design renewable…

  3. Broaden Engineering Technology students' knowledge through hands-on with motion robotics

    Science.gov (United States)

    The skills and knowledge that employers value most are not always well-aligned with undergraduate engineering technology programs. With the support of a federal grant, we identify and propose to broaden the undergraduate student experience to include training in transferable skills with agricultura...

  4. Outcome Evaluation of the Hands-On Parent Empowerment (HOPE) Program

    Science.gov (United States)

    Leung, Cynthia; Tsang, Sandra; Dean, Suzanne

    2011-01-01

    This study evaluated the effectiveness of the HOPE program. Participants included 120 Chinese new immigrant parents with preschool children in Hong Kong from 13 preschools which were randomized into intervention group (HOPE) and comparison group (6-session parent education program). Parent participants completed measures on child behavior,…

  5. Hands on Group Work Paper Model for Teaching DNA Structure, Central Dogma and Recombinant DNA

    Science.gov (United States)

    Altiparmak, Melek; Nakiboglu Tezer, Mahmure

    2009-01-01

    Understanding life on a molecular level is greatly enhanced when students are given the opportunity to visualize the molecules. Especially understanding DNA structure and function is essential for understanding key concepts of molecular biology such as DNA, central dogma and the manipulation of DNA. Researches have shown that undergraduate…

  6. A hands-on experience of the voice of customer analysis in maternity care from Iran.

    Science.gov (United States)

    Aghlmand, Siamak; Lameei, Aboulfath; Small, Rhonda

    2010-01-01

    The purpose of this paper is to describe the use of voice of customer (VoC) analysis in a maternity care case study, where the aim was to identify the most important requirements of women giving birth and to determine targets for the improvement of maternity care in Fayazbakhsh Hospital in Tehran, Iran. The tools of VoC analysis were used to identify: the main customer segment of maternity care; the most important of women's needs and requirements; the level of maternal satisfaction with delivered services at the study hospital and at a competitor; the nature of women's of requirements (termed Kano levels: assumed, expected, and unexpected); and the priorities of the study hospital for meeting these requirements. Women identified the well-being of mother and baby as the most important requirements. Women's satisfaction with the services was, with a few exceptions, low to moderate. Services related to most of the maternal requirements were ranked better in the competitor hospital than the study hospital. The results form a solid basis for achieving improvements in the processes of care for mothers and babies. The paper presents a systematic approach to VoC analysis in health care settings as a basis for clinical process improvement initiatives.

  7. Balloon and Button Spectroscopy: A Hands-On Approach to Light and Matter

    Science.gov (United States)

    Ribaudo, Joseph

    2016-01-01

    Without question, one of the most useful tools an astronomer or physicist can employ to study the universe is spectroscopy. However, for students in introductory physics or astronomy classes, spectroscopy is a relatively abstract concept that combines new physics topics such as thermal radiation, atomic physics, and the wave and particle nature of…

  8. Hands-On Laboratory Simulation of Evolution: An Investigation of Mutation, Natural Selection, & Speciation

    Science.gov (United States)

    Hildebrand, Terri J.; Govedich, Fredric R.; Bain, Bonnie A.

    2010-01-01

    Evolutionary theory is the foundation of the biological sciences, yet conveying it to General Biology students often presents a challenge, especially at larger institutions where student numbers in foundation courses can exceed several hundred per lecture section. We present a pedagogically sound exercise that utilizes a series of simple and…

  9. Applying Mathematical Concepts with Hands-On, Food-Based Science Curriculum

    Science.gov (United States)

    Roseno, Ashley T.; Carraway-Stage, Virginia G.; Hoerdeman, Callan; Díaz, Sebastián R.; Geist, Eugene; Duffrin, Melani W.

    2015-01-01

    This article addresses the current state of the mathematics education system in the United States and provides a possible solution to the contributing issues. As a result of lower performance in primary mathematics, American students are not acquiring the necessary quantitative literacy skills to become successful adults. This study analyzed the…

  10. More "Hands-On" Particle Physics: Learning with ATLAS at CERN

    Science.gov (United States)

    Long, Lynne

    2011-01-01

    This article introduces teachers and students to a new portal of resources called Learning with ATLAS at CERN (http://learningwithatlas-portal.eu/), which has been developed by a European consortium of academic researchers and schools' liaison and outreach providers from countries across Europe. It includes the use of some of the mind-boggling…

  11. Blender master class a hands-on guide to modeling, sculpting, materials, and rendering

    CERN Document Server

    Simonds, Ben

    2012-01-01

    Blender is a powerful and free 3D graphics tool used by artists and designers worldwide. But even experienced designers can find it challenging to turn an idea into a polished piece.For those who have struggled to create professional-quality projects in Blender, author Ben Simonds offers this peek inside his studio. You'll learn how to create 3D models as you explore the creative process that he uses to model three example projects: a muscular bat creature, a futuristic robotic spider, and ancient temple ruins. Along the way, you'll master the Blender interface and learn how to create and refi

  12. Measuring Vapor Pressure with an Isoteniscope: A Hands-on Introduction to Thermodynamic Concepts

    Science.gov (United States)

    Chen, Wenqian; Haslam, Andrew J.; Macey, Andrew; Shah, Umang V.; Brechtelsbauer, Clemens

    2016-01-01

    Characterization of the vapor pressure of a volatile liquid or azeotropic mixture, and its fluid phase diagram, can be achieved with an isoteniscope and an industrial grade digital pressure sensor using the experimental method reported in this study. We describe vapor-pressure measurements of acetone and n-hexane and their azeotrope, and how the…

  13. Getting Started With Oracle SOA Suite 11g R1 - A Hands-On Tutorial

    CERN Document Server

    Buelow, Heidi; Palvankar, Prasen

    2009-01-01

    This fully illustrated step-by-step tutorial is based on proven training material that has been highly praised by hundreds of developers in product training courses given as part of the SOA Suite 11g rollout. You will learn how to build a services-oriente

  14. Newspaper advertising versus direct mail marketing in a family practice: a hands-on approach.

    Science.gov (United States)

    Godreau, C J

    1995-01-01

    This study compares newspaper advertising and direct mail marketing to attract private patients. Newsletter advertising was distributed to 92,251 homes throughout 1991 at a cost of $20,827.13. Newspaper advertising was conducted from August 28 to October 9, 1991 at a cost of $2,261.94. The newsletter attracted 101 new patients at a cost of $206.21 per patient and a mean response rate of 0.11%. No new patients were attracted through newspaper advertising.

  15. "Hot hand" on strike: bowling data indicates correlation to recent past results, not causality.

    Directory of Open Access Journals (Sweden)

    Gur Yaari

    Full Text Available Recently, the "hot hand" phenomenon regained interest due to the availability and accessibility of large scale data sets from the world of sports. In support of common wisdom and in contrast to the original conclusions of the seminal paper about this phenomenon by Gilovich, Vallone and Tversky in 1985, solid evidences were supplied in favor of the existence of this phenomenon in different kinds of data. This came after almost three decades of ongoing debates whether the "hot hand" phenomenon in sport is real or just a mis-perception of human subjects of completely random patterns present in reality. However, although this phenomenon was shown to exist in different sports data including basketball free throws and bowling strike rates, a somehow deeper question remained unanswered: are these non random patterns results of causal, short term, feedback mechanisms or simply time fluctuations of athletes performance. In this paper, we analyze large amounts of data from the Professional Bowling Association(PBA. We studied the results of the top 100 players in terms of the number of available records (summed into more than 450,000 frames. By using permutation approach and dividing the analysis into different aggregation levels we were able to supply evidence for the existence of the "hot hand" phenomenon in the data, in agreement with previous studies. Moreover, by using this approach, we were able to demonstrate that there are, indeed, significant fluctuations from game to game for the same player but there is no clustering of successes (strikes and failures (non strikes within each game. Thus we were lead to the conclusion that bowling results show correlation to recent past results but they are not influenced by them in a causal manner.

  16. Hands-On Data Analysis: Using 3D Printing to Visualize Reaction Progress Surfaces

    Science.gov (United States)

    Higman, Carolyn S.; Situ, Henry; Blacklin, Peter; Hein, Jason E.

    2017-01-01

    Advances in 3D printing technology over the past decade have led to its expansion into all subfields of science, including chemistry. This technology provides useful teaching tools that facilitate communication of difficult chemical concepts to students and researchers. Presented here is the use of 3D printing technology to create tangible models…

  17. Hands-on repair of component with a lowered pool water level

    International Nuclear Information System (INIS)

    Perfect, J.F.

    1984-01-01

    The repair of a broken positioner mechanism on a TRIGA Reactor neutron collimator, with a lowered pool water level, presented a unique challenge. Radiation dose measurements were made which indicated the repair could be done safely with only 3 feet of water providing shielding over the reactor core. The entire repair project went quite well, due in large part to extensive preplanning. Repair was done safely and radiation exposures were kept well below allowable levels. Savings were significant using this method of repair compared to the alternative of dismantling the facility. (author)

  18. Hands-on repair of component with a lowered pool water level

    International Nuclear Information System (INIS)

    Perfect, J.F.

    1984-01-01

    The repair of a broken positioner mechanism on a TRIGA Reactor neutron collimator, with a lowered pool water level, presented a unique challenge. Radiation dose measurements were made which indicated the repair could be done safetly with only 3 feet of water providing shielding over the reactor core. The entire repair project went quite well, due in large part to extensive preplanning. Repair was done safely and radiation exposures were kept well below allowable levels. Savings were significant using this method of repair compared to the alternative of dismantling the facility

  19. Assembly of a Vacuum Chamber: A Hands-On Approach to Introduce Mass Spectrometry

    Science.gov (United States)

    Bussie`re, Guillaume; Stoodley, Robin; Yajima, Kano; Bagai, Abhimanyu; Popowich, Aleksandra K.; Matthews, Nicholas E.

    2014-01-01

    Although vacuum technology is essential to many aspects of modern physical and analytical chemistry, vacuum experiments are rarely the focus of undergraduate laboratories. We describe an experiment that introduces students to vacuum science and mass spectrometry. The students first assemble a vacuum system, including a mass spectrometer. While…

  20. All Hands on Deck: Ten Lessons from Early Adopters of Competency-Based Education

    Science.gov (United States)

    Book, Patricia A.

    2014-01-01

    The perceived value of postsecondary education to economic competitiveness and individual success is driving innovation in higher education. Competency-based education (CBE) is the latest disruption that seeks to respond to the growing sense of national urgency to boost education attainment. The target audience generally includes those adult…

  1. Wireless Sensor Networks--A Hands-On Modular Experiments Platform for Enhanced Pedagogical Learning

    Science.gov (United States)

    Taslidere, E.; Cohen, F. S.; Reisman, F. K.

    2011-01-01

    This paper presents the use of wireless sensor networks (WSNs) in educational research as a platform for enhanced pedagogical learning. The aim here with the use of a WSN platform was to go beyond the implementation stage to the real-life application stage, i.e., linking the implementation to real-life applications, where abstract theory and…

  2. Teaching Electron--Positron--Photon Interactions with Hands-on Feynman Diagrams

    Science.gov (United States)

    Kontokostas, George; Kalkanis, George

    2013-01-01

    Feynman diagrams are introduced in many physics textbooks, such as those by Alonso and Finn and Serway, and their use in physics education has been discussed by various authors. They have an appealing simplicity and can give insight into events in the microworld. Yet students often do not understand their significance and often cannot combine the…

  3. The Impact of Hands-On Simulation Laboratories on Teaching of Wireless Communications

    Science.gov (United States)

    Chou, Te-Shun; Vanderbye, Aaron

    2017-01-01

    Aim/Purpose: To prepare students with both theoretical knowledge and practical skills in the field of wireless communications. Background: Teaching wireless communications and networking is not an easy task because it involves broad subjects and abstract content. Methodology: A pedagogical method that combined lectures, labs, assignments, exams,…

  4. Hands-on Electrospray Ionization-Mass Spectrometry for Upper-Level Undergraduate and Graduate Students

    Science.gov (United States)

    Stock, Naomi L.; March, Raymond E.

    2014-01-01

    Electrospray ionization-mass spectrometry (ESI-MS) is a powerful technique for the detection, identification, and quantification of organic compounds. As mass spectrometers have become more user-friendly and affordable, many students--often with little experience in mass spectrometry--find themselves needing to incorporate mass spectrometry into…

  5. All Hands on Deck: Organizing for the Schools Saint Paul Children Deserve

    Science.gov (United States)

    Fought, Eric S.

    2015-01-01

    This article describes a group of dedicated educators who, in the midst of a constant barrage of attacks, dramatically changed the conversation. It is the story of a union that recognized that, in order to bring about the transformation necessary for the betterment of the entire community, its members needed to transform the way in which it…

  6. A Hands-On Classroom Simulation to Demonstrate Concepts in Enzyme Kinetics

    Science.gov (United States)

    Junker, Matthew

    2010-01-01

    A classroom exercise is described to introduce enzyme kinetics in an undergraduate biochemistry or chemistry course. The exercise is a simulation in which a student acts as an enzyme that "catalyzes" the unscrewing of a nut from a bolt. With other students assisting, the student enzyme carries out reactions with bolt-nut substrates under different…

  7. Solar Collector Design Optimization: A Hands-on Project Case Study

    Science.gov (United States)

    Birnie, Dunbar P., III; Kaz, David M.; Berman, Elena A.

    2012-01-01

    A solar power collector optimization design project has been developed for use in undergraduate classrooms and/or laboratories. The design optimization depends on understanding the current-voltage characteristics of the starting photovoltaic cells as well as how the cell's electrical response changes with increased light illumination. Students…

  8. Restoring monarch butterfly habitat in the Midwestern US: 'All hands on deck'

    Science.gov (United States)

    Thogmartin, Wayne E.; Lopez-Hoffman, Laura; Rohweder, Jason; Diffendorfer, James E.; Drum, Ryan G.; Semmens, Darius J.; Black, Scott; Caldwell, Iris; Cotter, Donita; Drobney, Pauline; Jackson, Laura L.; Gale, Michael; Helmers, Doug; Hilburger, Steven B.; Howard, Elizabeth; Oberhauser, Karen S.; Pleasants, John M.; Semmens, Brice X.; Taylor, Orley R.; Ward, Patrick; Weltzin, Jake F.; Wiederholt, Ruscena

    2017-01-01

    The eastern migratory population of monarch butterflies (Danaus plexippus plexippus) has declined by >80% within the last two decades. One possible cause of this decline is the loss of ≥1.3 billion stems of milkweed (Asclepias spp.), which monarchs require for reproduction. In an effort to restore monarchs to a population goal established by the US Fish and Wildlife Service and adopted by Mexico, Canada, and the US, we developed scenarios for amending the Midwestern US landscape with milkweed. Scenarios for milkweed restoration were developed for protected area grasslands, Conservation Reserve Program land, powerline, rail and roadside rights of way, urban/suburban lands, and land in agricultural production. Agricultural land was further divided into productive and marginal cropland. We elicited expert opinion as to the biological potential (in stems per acre) for lands in these individual sectors to support milkweed restoration and the likely adoption (probability) of management practices necessary for affecting restoration. Sixteen of 218 scenarios we developed for restoring milkweed to the Midwestern US were at levels (>1.3 billion new stems) necessary to reach the monarch population goal. One of these scenarios would convert all marginal agriculture to conserved status. The other 15 scenarios converted half of marginal agriculture (730 million stems), with remaining stems contributed by other societal sectors. Scenarios without substantive agricultural participation were insufficient for attaining the population goal. Agricultural lands are essential to reaching restoration targets because they occupy 77% of all potential monarch habitat. Barring fundamental changes to policy, innovative application of economic tools such as habitat exchanges may provide sufficient resources to tip the balance of the agro-ecological landscape toward a setting conducive to both robust agricultural production and reduced imperilment of the migratory monarch butterfly.

  9. Does ERP Hands-On Experience Help Students Learning Business Process Concepts?

    Science.gov (United States)

    Rienzo, Thomas; Han, Bernard

    2011-01-01

    Over the past decade, more and more business schools are attempting to teach business processes (BPs) by using enterprise resource planning (ERP) software in their curricula. Currently, most studies involving ERP software in the academy have concentrated on learning and teaching via self-assessment surveys or curriculum integration. This research…

  10. "Who Dunnit?": Learning Chemistry and Critical Thinking through Hands-On Forensic Science.

    Science.gov (United States)

    Demetry, Chrysanthe; Nicoletti, Denise; Mix, Kimberlee; O'Connor, Kerri; Martin, Andrea

    2002-01-01

    Demonstrates how forensic science can be used as a framework for generating student interest and learning in chemistry and promoting critical thinking. The "Who Dunnit?" forensic science workshop was developed by undergraduate students and is one element of a two-week residential summer outreach program that seeks to develop interest in…

  11. Hands-On ERP Learning: Using OpenERP[R], an Alternative to SAP[R

    Science.gov (United States)

    Ayyagari, Ramakrishna

    2011-01-01

    Recent struggles with ERP systems (Kanaracus, 2010) highlight that teaching ERP skills is still very relevant today. Previous research suggests that knowledge of ERP concepts is more important than skills with any particular ERP package (Strong et al., 2006). However, a review of published studies in "JISE" shows a bias towards commercial ERP…

  12. Introducing systems engineering to industrial design engineering students with hands-on experience

    NARCIS (Netherlands)

    Bonnema, Gerrit Maarten; Lutters-Weustink, Ilanit F.; van Houten, Frederikus J.A.M.; Selvaraj, H.; Muthukumar, V.

    2005-01-01

    The article presents an innovative educational project to introduce systems engineering to third year students in industrial design engineering at the University of Twente. In a short period the students are confronted with new technology, namely sensors and actuators. They have to apply this

  13. Investigation on Characterizing Heated Pulsating Flows with Hot Wire Anemometers - A Hands-On Approach

    Directory of Open Access Journals (Sweden)

    Marius Alexandru PANAIT

    2014-06-01

    Full Text Available The pulsating heated flows are traditionally a difficult subject to treat with conventional hot wire or film methods. Special factors that complicate matters are flow reversal and non linear flow effects of vortices and wire probe wake disturbances on the heat transfer to the hot film or wire sensor in heated pulsating flows. The presence of these strongly nonlinear and unknown terms leads to great difficulties in calibration of hot film probes in this particular regime. The paper analyses the current state of matters in the field and reports a series of solutions that have been practically tested in a case of a high speed pulsated heated flow. Normally such measurements are made in a non-contact fashion using a LDV system or various visualization techniques but there have been recent attempts to use a constant temperature hot wire anemometer system (CTA.To obtain meaningful calibration for hot wire films in hot pulsating flows, a comparison system on other principles (LDV was used, as well as a specially designed nozzle to replace the calibrator unit that could not be operated with heated fluid due to structural integrity reasons. The method as described below works well for the expected speed range that could be generated using the special nozzle.

  14. The 2014–2015 Ebola outbreak in West Africa: Hands On

    Directory of Open Access Journals (Sweden)

    Pauline Vetter

    2016-05-01

    Full Text Available Abstract The International Consortium for Prevention and Infection Control (ICPIC organises a biannual conference (ICPIC on various subjects related to infection prevention, treatment and control. During ICPIC 2015, held in Geneva in June 2015, a full one-day session focused on the 2014–2015 Ebola virus disease (EVD outbreak in West Africa. This article is a non-exhaustive compilation of these discussions. It concentrates on lessons learned and imagining a way forward for the communities most affected by the epidemic. The reader can access video recordings of all lectures delivered during this one-day session, as referenced. Topics include the timeline of the international response, linkages between the dynamics of the epidemic and infection prevention and control, the importance of community engagement, and updates on virology, diagnosis, treatment and vaccination issues. The paper also includes discussions from public health, infectious diseases, critical care and infection control experts who cared for patients with EVD in Africa, in Europe, and in the United Sates and were involved in Ebola preparedness in both high- and low-resource settings and countries. This review concludes that too little is known about the pathogenesis and treatment of EVD, therefore basic and applied research in this area are urgently required. Furthermore, it is clear that epidemic preparedness needs to improve globally, in particular through the strengthening of health systems at local and national levels. There is a strong need for culturally sensitive approaches to public health which could be designed and delivered by social scientists and medical professionals working together. As of December 2015, this epidemic killed more than 11,000 people and infected more than 28,000; it has also generated more than 17,000 survivors and orphans, many of whom face somatic and psychological complications. The continued treatment and rehabilitation of these people is a public health priority, which also requires an integration of specific medical and social science approaches, not always available in West Africa.

  15. Teaching with Dogs: Learning about Learning through Hands-on Experience in Dog Training

    Science.gov (United States)

    McConnell, Bridget L.

    2016-01-01

    This paper summarizes a pilot study of an experiential learning technique that was designed to give undergraduate students a greater understanding of the principles and theories of learning and behavior, which is traditionally taught only in a lecture-based format. Students were assigned the role of a dog trainer, and they were responsible for…

  16. Hands-on Experiments on Glycemia Regulation and Type 1 Diabetes

    Science.gov (United States)

    Mingueneau, M.; Chaix, A.; Scotti, N.; Chaix, J.; Reynders, A.; Hammond, C.; Thimonier, J.

    2015-01-01

    In the present article, we describe a 3-day experimental workshop on glycemia regulation and type 1 diabetes that engages students in open-ended investigations and guided experiments leading to results that are not already known to them. After an initial questioning phase during which students observe PowerPoint slides depicting the glycemia…

  17. Hands-on at a Distance: Evaluation of a Temperature and Heat Distance Learning Course

    Science.gov (United States)

    Krall, Rebecca McNall; Straley, Joseph P.; Shafer, Sally A.; Osborn, Jeffrey L.

    2009-01-01

    The No Child Left Behind Act requires that all teachers be certified within the content areas that they teach. However, attracting and retaining highly qualified science teachers in rural school districts is particularly difficult due to limited resources and geographic and professional isolation. Science professional development programs could…

  18. Student Hands-On Training (SHOT) Workshop Summer 2003 and 2004

    National Research Council Canada - National Science Library

    Koehler, Chris

    2004-01-01

    .... The objective of SHOT I AND II workshops are to provide these new students exposure to some of the basics of spacecraft construction, the teamwork and coordination involved, as well as the challenges...

  19. eLearning Hands-On: Blending Interactive eLearning with Practical Engineering Laboratory

    Science.gov (United States)

    Kiravu, Cheddi; Yanev, Kamen M.; Tunde, Moses O.; Jeffrey, Anna M.; Schoenian, Dirk; Renner, Ansel

    2016-01-01

    Purpose: Integrating laboratory work into interactive engineering eLearning contents augments theory with practice while simultaneously ameliorating the apparent theory-practice gap in traditional eLearning. The purpose of this paper is to assess and recommend media that currently fulfil this desirable dual pedagogical goal.…

  20. The Hands-On Guide to School Improvement: Transform Culture, Empower Teachers, and Raise Student Achievement

    Science.gov (United States)

    Randle-Robins, Evelyn

    2016-01-01

    This no-nonsense handbook from a working principal helps school leaders bring transformational change to struggling or underperforming schools. Based on the wisdom and experience gained during the author's years as a teacher and principal in Chicago public schools, the book shows you how to become a visionary leader and build a culture of respect…