Recent fuel handling experience in Canada

International Nuclear Information System (INIS)

Welch, A.C.

1991-01-01

For many years, good operation of the fuel handling system at Ontario Hydro's nuclear stations has been taken for granted with the unavailability of the station arising from fuel handling system-related problems usually contributing less than one percent of the total unavailability of the stations. While the situation at the newer Hydro stations continues generally to be good (with the specific exception of some units at Pickering B) some specific and some general problems have caused significant loss of availability at the older plants (Pickering A and Bruce A). Generally the experience at the 600 MWe units in Canada has also continued to be good with Point Lepreau leading the world in availability. As a result of working to correct identified deficiencies, there were some changes for the better as some items of equipment that were a chronic source of trouble were replaced with improved components. In addition, the fuel handling system has been used three times as a delivery system for large-scale non destructive examination of the pressure tubes, twice at Bruce and once at Pickering and performing these inspections this way has saved many days of reactor downtime. Under COG there are several programs to develop improved versions of some of the main assemblies of the fuelling machine head. This paper will generally cover the events relating to Pickering in more detail but will describe the problems with the Bruce Fuelling Machine Bridges since the 600 MW 1P stations have a bridge drive arrangement that is somewhat similar to Bruce

Handling of radioactive waste

International Nuclear Information System (INIS)

Sanhueza Mir, Azucena

1998-01-01

Based on characteristics and quantities of different types of radioactive waste produced in the country, achievements in infrastructure and the way to solve problems related with radioactive waste handling and management, are presented in this paper. Objectives of maintaining facilities and capacities for controlling, processing and storing radioactive waste in a conditioned form, are attained, within a great range of legal framework, so defined to contribute with safety to people and environment (au)

Developing Programming Tools to Handle Traveling Salesman Problem by the Three Object-Oriented Languages

Directory of Open Access Journals (Sweden)

Hassan Ismkhan

2014-01-01

Full Text Available The traveling salesman problem (TSP is one of the most famous problems. Many applications and programming tools have been developed to handle TSP. However, it seems to be essential to provide easy programming tools according to state-of-the-art algorithms. Therefore, we have collected and programmed new easy tools by the three object-oriented languages. In this paper, we present ADT (abstract data type of developed tools at first; then we analyze their performance by experiments. We also design a hybrid genetic algorithm (HGA by developed tools. Experimental results show that the proposed HGA is comparable with the recent state-of-the-art applications.

Project to develop and demonstrate methods to eliminate frozen coal handling problems. Status report I

Energy Technology Data Exchange (ETDEWEB)

None

1980-09-15

For too many years, problems associated with frozen coal have plagued the companies who mine it, the companies who handle it in transit and the utilities and other industrial concerns that finally burn it. But never before has the magnitude of the frozen coal problem been as great as it is today because of two primary factors, i.e. (1) the majority of coal currently transported and used has been ground to a very fine mesh that absorbs water readily, thus providing more surface area for freezing, and (2) the substantially increased importance of coal, indeed, the now critical necessity for more coal to be used in displacing dangerously uncertain foreign oil supplies that currently account for 50 percent of our daily domestic oil consumption. Frozen coal problems can and do have a devastating effect upon the ability to provide energy from coal during harsh winter months when it is not needed. The majority of these problems have been involved with removing frozen coal from rail cars. To allay the problem, numerous techniques have been tried, all with some measure of success. As an example, certain chemicals have been sprayed on the coal; another common treatment has been widespread use of thaw sheds, which, whether electrically or gas-fired, are all energy intensive, time consuming, hard on rail equipment and expensive to operate over long periods of time. From sledge hammers and crow bars to gas-fired jets and electric thaw sheds, available mechanical de-icing methods often damage coal handling equipment, are time consuming and, therefore, very expensive when demurrage losses must be added to significant investment and/or operating costs.

A new formulation of the understeer coefficient to relate yaw torque and vehicle handling

Science.gov (United States)

Bucchi, F.; Frendo, F.

2016-06-01

The handling behaviour of vehicles is an important property for its relation to performance and safety. In 1970s, Pacejka did the groundwork for an objective analysis introducing the handling diagram and the understeer coefficient. In more recent years, the understeer concept is still mentioned but the handling is actively managed by direct yaw control (DYC). In this paper an accurate analysis of the vehicle handling is carried out, considering also the effect of drive forces. This analysis brings to a new formulation of the understeer coefficient, which is almost equivalent to the classical one, but it can be obtained by quasi-steady-state manoeuvres. In addition, it relates the vehicle yaw torque to the understeer coefficient, filling up the gap between the classical handling approach and DYC. A multibody model of a Formula SAE car is then used to perform quasi-steady-state simulations in order to verify the effectiveness of the new formulation. Some vehicle set-ups and wheel drive arrangements are simulated and the results are discussed. In particular, the handling behaviours of the rear wheel drive (RWD) and the front wheel drive (FWD) architectures are compared, finding an apparently surprising result: for the analysed vehicle the FWD is less understeering than for RWD. The relation between the yaw torque and the understeer coefficient allows to understand this behaviour and opens-up the possibility for different yaw control strategies.

A Rule-Based Local Search Algorithm for General Shift Design Problems in Airport Ground Handling

DEFF Research Database (Denmark)

Clausen, Tommy

We consider a generalized version of the shift design problem where shifts are created to cover a multiskilled demand and fit the parameters of the workforce. We present a collection of constraints and objectives for the generalized shift design problem. A local search solution framework with mul......We consider a generalized version of the shift design problem where shifts are created to cover a multiskilled demand and fit the parameters of the workforce. We present a collection of constraints and objectives for the generalized shift design problem. A local search solution framework...... with multiple neighborhoods and a loosely coupled rule engine based on simulated annealing is presented. Computational experiments on real-life data from various airport ground handling organization show the performance and flexibility of the proposed algorithm....

An adaptive ES with a ranking based constraint handling strategy

Directory of Open Access Journals (Sweden)

Kusakci Ali Osman

2014-01-01

Full Text Available To solve a constrained optimization problem, equality constraints can be used to eliminate a problem variable. If it is not feasible, the relations imposed implicitly by the constraints can still be exploited. Most conventional constraint handling methods in Evolutionary Algorithms (EAs do not consider the correlations between problem variables imposed by the constraints. This paper relies on the idea that a proper search operator, which captures mentioned implicit correlations, can improve performance of evolutionary constrained optimization algorithms. To realize this, an Evolution Strategy (ES along with a simplified Covariance Matrix Adaptation (CMA based mutation operator is used with a ranking based constraint-handling method. The proposed algorithm is tested on 13 benchmark problems as well as on a real life design problem. The outperformance of the algorithm is significant when compared with conventional ES-based methods.

Improvements in or relating to handling of flue gas

International Nuclear Information System (INIS)

Ingham, R.V.

1986-01-01

The patent describes improvements in the method for handling flue gas from the burning of fossil fuels. The method relates to cleaning the flue gas, from which the sulphur compounds are removed. The gas in then heated by heat derived from a nuclear source, which may be nuclear waste. The heat treatment gives efficient atmospheric dispersion from the chimney. (U.K.)

A combined constraint handling framework: an empirical study

DEFF Research Database (Denmark)

Si, Chengyong; Hu, Junjie; Lan, Tian

2017-01-01

This paper presents a new combined constraint handling framework (CCHF) for solving constrained optimization problems (COPs). The framework combines promising aspects of different constraint handling techniques (CHTs) in different situations with consideration of problem characteristics. In order...

Drug related problems with Antiparkinsonian agents: consumer Internet reports versus published data.

Science.gov (United States)

Schröder, Sabrina; Zöllner, York Francis; Schaefer, Marion

2007-10-01

There is currently a lack of detailed information concerning drug related problems in the outpatient treatment of Parkinson's disease. Problems associated with drug treatment communicated anonymously in Parkinson's disease online forums were therefore retrospectively searched and documented for 1 year. Based on postings concerning 12 drugs for the treatment of Parkinson's disease, a total of 238 drug related problems were identified and categorised using the Problem Intervention Documentation (PI-Doc). Of these, 153 were adverse drug reactions. Adverse drug reactions associated with the skin were relatively common, but central effects such as cognitive or psychiatric changes, effects on the sleep/waking system and other problems like headache and dizziness accounted for the highest percentage of adverse events. A comparison with data from scientific literature revealed a number of differences. This means that an analysis of online forums detected a number of drug related problems that were otherwise largely invisible. These were mainly associated with the qualitative aspects of treatment such as medication handling, dosage and individual problems concerning adverse events. In addition, the described method of identifying and classifying drug related problems in Internet forums may also be seen as a contribution to the international discussion about consumer reports and pharmacovigilance. The information about adverse drug reactions given by Internet users can be seen as a valuable adjunct to clinical trial data and as being very timely with regard to the event itself. Online forums may be considered as a suitable source of observational information to complement data from randomised clinical trials.

Trends in Modern Exception Handling

Directory of Open Access Journals (Sweden)

Marcin Kuta

2003-01-01

Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

Remote handling equipment

International Nuclear Information System (INIS)

Clement, G.

1984-01-01

After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

Handling and transport problems (1960)

International Nuclear Information System (INIS)

Pomarola, J.; Savouyaud, J.

1960-01-01

I. The handling and transport of radioactive wastes involves the danger of irradiation and contamination. It is indispensable: - to lay down a special set of rules governing the removal and transport of wastes within centres or from one centre to another; - to give charge of this transportation to a group containing teams of specialists. The organisation, equipment and output of these teams is being examined. II. Certain materials are particularly dangerous to transport, and for these special vehicles and fixed installations are necessary. This is the case especially for the evacuation of very active liquids. A transport vehicle is described, consisting of a trailer tractor and a recipient holding 500 litres of liquid of which the activity can reach 1000 C/l; the decanting operation, the route to be followed by the vehicle, and the precautions taken are also described. (author) [fr

Resolving relative time expressions in Dutch text with Constraint Handling Rules

DEFF Research Database (Denmark)

van de Camp, Matje; Christiansen, Henning

2012-01-01

It is demonstrated how Constraint Handling Rules can be applied for resolution of indirect and relative time expressions in text as part of a shallow analysis, following a specialized tagging phase. A method is currently under development, optimized for a particular corpus of historical biographies...

Principles for the Safe Moving and Handling of Patients

Directory of Open Access Journals (Sweden)

Wanless Stephen

2016-12-01

Full Text Available Human movement when walking or running is a widely researched area. However, there is an increased incidence of musculoskeletal injury from poor positioning when moving and handling patients amongst healthcare professionals and is one of the main causes of long term musculoskeletal health problems. In the clinical area, an individual’s musculoskeletal health system is subjected to mechanical loading, increasing the body’s stress and strain limits, and once these are exceeded injury occurs. The risk of pain and injury has a direct relation from the over use of poor posture from poor moving and handling, which in turn can cause loss of strength and reduce musculoskeletal function. This can be changed through healthcare workers adopting safe biomechanical body movements during patient handling tasks.

Energy-saving methodology for material handling applications

Energy Technology Data Exchange (ETDEWEB)

Makris, P.A.; Makri, A.P.; Provatidis, C.G. [National Technical University of Athens, School of Mechanical Engineering, Mechanical Design and Control Systems Division, 9 Iroon Polytechniou Street, Zografou Campus, GR-15773 Athens (Greece)

2006-10-15

This paper presents an energy saving approach to the problem of order picking in warehousing environment, which is directly related to the well-known Traveling Salesman Problem (TSP). While the available heuristic algorithms for the order-picking problem search for the route that minimizes the travel time, here the problem is addressed from the energy saving point of view. In a few words, the least energy-consuming route is identified in order to quantify the trade off in time and energy between the fastest route and the most energy economic one. Keeping in mind that often energy is as important as time, especially during a low-demand period, the current paper sheds some light into a two dimensional way of addressing the warehouse material handling problem, which saves time as well as energy. A very interesting finding is that a relatively small loss of service time in many cases may lead to a significant decrease of consumed energy without any additional cost. (author)

Moving and handling education in the community: technological innovations to improve practice.

Science.gov (United States)

Wanless, Stephen; Page, Andrea

2009-12-01

Efforts to reduce injuries associated with patient handling are often based on tradition and personal experience rather than sound educational theory. The purpose of this article is to summarize current evidence for educational interventions designed to reduce primary care staff injuries: a significant problem for decades. Evidence suggests that the current 'classroom' teaching of moving and handling is ineffective. There is a growing body of evidence to support newer interventions that are effective or show promise in reducing musculoskeletal injuries in health professionals (Freitag et al, 2007). The authors discuss potential solutions through moving and handling-related motion capture simulation and the use of e-learning to promote an understanding of the principles associated with patient handling tasks.

Superphenix 1 primary handling system fabrication and testing

International Nuclear Information System (INIS)

Branchu, J.; Ebbinghaus, K.; Gigarel, C.

1985-01-01

Primary handling covers the operations performed for spent fuel removal, new fuel insertion, and the insodium storage outside the new or spent fuel vessel. This equipment typifies many of the difficulties encountered with the project as a whole: fabrication coordination when several countries are involved and design and construction of very large, relatively complex components. Detailed design studies were mainly influenced by thermal and seismic requirements, as applicable to sodium-immersed structures. Where possible, well-tried mechanical solutions were used, but widely differing techniques were involved, ranging from the high precision fabrication of structures and mechanisms comprising numerous component parts, implying complex machining operations. No particular problems were encountered during the sodium testing of the primary handling equipment. Trends for the 1500-MW (electric) breeder include investigation of the advisability of fuel storage in the core lattice and the possibility of handling system simplification

Enclosure for handling high activity materials

International Nuclear Information System (INIS)

Jimeno de Osso, F.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Enclosure for handling high activity materials

Energy Technology Data Exchange (ETDEWEB)

Jimeno de Osso, F

1977-07-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Good practices in managing work-related indoor air problems: a psychosocial perspective.

Science.gov (United States)

Lahtinen, Marjaana; Huuhtanen, Pekka; Vähämäki, Kari; Kähkönen, Erkki; Mussalo-Rauhamaa, Helena; Reijula, Kari

2004-07-01

Indoor air problems at workplaces are often exceedingly complex. Technical questions are interrelated with the dynamics of the work community, and the cooperation and interaction skills of the parties involved in the problem solving process are also put to the test. The objective of our study was to analyze the process of managing and solving indoor air problems from a psychosocial perspective. This collective case study was based on data from questionnaires, interviews and various documentary materials. Technical inspections of the buildings and indoor air measurements were also carried out. The following four factors best differentiated successful cases from impeded cases: extensive multiprofessional collaboration and participative action, systematic action and perseverance, investment in information and communication, and process thinking and learning. The study also proposed a theoretical model for the role of the psychosocial work environment in indoor air problems. The expertise related to social and human aspects of problem solving plays a significant role in solving indoor air problems. Failures to properly handle these aspects may lead to resources being wasted and result in a problematic situation becoming stagnant or worse. Copyright 2004 Wiley-Liss, Inc.

STRATEGI MEDIA RELATIONS HUMAS PT. PELABUHAN INDONESIA III DALAM HANDLING CRISIS PEMBERITAAN

Directory of Open Access Journals (Sweden)

Agesty Sabreyna RM

2016-03-01

Full Text Available Media Relations was a requirement for Public Relation practitioners thatPR had an important role in a relationship with media. It was because thetask of public relation was the mass media and journalist. PT PelabuhanIndonesia III (Persero as a State-owned enterprised cannot separate withthe crisis news. The strategy of media relations was very important to handlethe negative publicity because it could affect a company’s image.This research used qualitative descriptive method with data collectiontechniques, observation, interviews, and literature. The aim was determinethe media relations strategy of PT. Pelabuhan Indonesia III (Persero tohandle media crisis and compared it with the theory used. This study usedtheory of public relations, crisis and the media of media relations in crisissituation. The crisis of media should solve quickly and precisely, by handling the crisis.The results of this research to handle a news crisis, the steps were: 1. Analysis,2. Identification, 3. Responds media. All the four steps above, the activity ofmedia relations were very important to do, and the strategy of media relationsused to support roles, functions and duties of public relations. The strategy ofmedia relations were: By served the media, By established a reputations for reliability, By supplying good copy, By cooperations in providing materials, verifications By provided facilities, and By build a personal relationship withthe media. The six of those strategies was the activity of public relationscommunications to establish understanding and good relations with the massmedia.Keywords: Crisis, Public Relations, Media Relations, Strategy, andPelabuhan Indonesia III (Persero

Mediation of Conflict Handling Styles in the Relation between Virtues and Marital Satisfaction

Directory of Open Access Journals (Sweden)

حسین نادری

2016-03-01

Full Text Available Despite awareness of the adjusted conflict tactics, sometimes there is no motivation for proper behavior. It is expected that virtues increase the likelihood of adaptive behaviors by affecting motivation for ethical behaviors. This research studied the relation between marital satisfaction, character and its underlying virtues that are the internal elements necessary for adjusted life from a positive psychology perspective. It is assumed that spouse's conflict handling styles is a mediator that play a role between character, virtues, and marital satisfaction. In a correlation plan, the married university students living in dormitories were asked to complete three questionnaires: Character Strengths, Conflict Management Style, and Marital Satisfaction. Finally, the data was analyzed based on SEM method. The courage and transcendence are found as predictors of marital satisfaction and adaptive conflict handling tactics; The Humanity doesn't show a significant relationship with satisfaction. Results also support the mediating role of adaptive conflict handling styles in relation between virtues and satisfaction. It seems that marital satisfaction stems basically from the individual's inner characteristics rather than love between spouses. Virtues affect marital outcomes through their impact on spouses' interaction styles during conflicts. Clinical implications of these results are discussed as suggestions for family therapy interventions based on a positive perspective.

Sequence trajectory generation for garment handling systems

OpenAIRE

Liu, Honghai; Lin, Hua

2008-01-01

This paper presents a novel generic approach to the planning strategy of garment handling systems. An assumption is proposed to separate the components of such systems into a component for intelligent gripper techniques and a component for handling planning strategies. Researchers can concentrate on one of the two components first, then merge the two problems together. An algorithm is addressed to generate the trajectory position and a clothes handling sequence of clothes partitions, which ar...

Remote handling of JET in-torus components. A practical experience

International Nuclear Information System (INIS)

Mills, S.; Brade, R.; Edwards, P.

2000-01-01

This paper summarises the experiences gained from the extensive handling of JET components inside the torus. The problems involved with handling components not designed to be remotely handled and the methods used to overcome them are described and discussed with specific examples from recent JET remote operations. The method employed for remotely producing structural TIG welds is explained. The problems of dextrous manipulation in an inverted attitude are discussed and the methods of amelioration are described

Enclosure for handling high activity materials abstract

International Nuclear Information System (INIS)

Jimeno de Osso, F.; Dominguez Rodriguez, G.; Cruz Castillo, F. de la; Rodriguez Esteban, A.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With that purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. A description is given of those aspects that may be of interest to people working in this field. (author) [es

Work-related musculoskeletal risks associated with nurses and nursing assistants handling overweight and obese patients: A literature review.

Science.gov (United States)

Choi, Sang D; Brings, Kathryn

2015-01-01

Nurses and nursing assistants are susceptible to work-related musculoskeletal disorders and injuries (WMSDs) due to the increase in overweight and obese patients they are handling on a daily basis. This study aimed to review work-related musculoskeletal hazards and risks associated with handling overweight and obese patients, and summarize the recommended interventions to mitigate musculoskeletal concerns among nurses and nursing assistants. Approximately 350 publications were initially screened and 22 refereed articles were used to synthesize for this study on the bases of inclusion/exclusion relevance and strength of evidence on overweight or obese patient handling. Evidence suggested that the work-related musculoskeletal risks among nurses and nursing assistants included sprains/strains, low back pain, wrist, knee and shoulder injuries. The findings indicated that the WMSD risks increased when nurses and nursing assistants were manually moving or lifting patients, especially when the patients were overweight or obese. The recommended solutions included the lifting/transfer equipment and devices, ergonomic assessments and controls, no-lift policies, and training and education. To alleviate the risk of musculoskeletal disorders and injuries among nurses and nursing assistants handling overweight or obese patients, additional research and development into what safe patient handling interventions suit this growing population needs to be addressed.

Risk assessment related to manual handling on choosen work possition in foundry Alstom Power Sp. z o. o.

Directory of Open Access Journals (Sweden)

G. Kowal

2010-04-01

Full Text Available Manual handling remains one of the different types of transport inside working place, although technological progress and modernorganization of work. Manual transport as a transport inside working place is related to foundry industry. According to polish lawregulations employer has to give consideration to manual handling in professional risk assessment and introduce actions for manualhandling reduction. In Foundry Elblag case there is found that in many processes manual handling are made by workers. For example wecan choose melting processes (additives manual feeding, mixing and pulling metallurgical slag, etc. or fettling processes like grinding.Objective of that analysis was to define level of risk related to manual handling in work stand chosen and define activities impacted onrisk assessment result with biggest range. For risk reduction, technical and organizational solutions were shown (better ergonomically work stand, method of work and worker’s awareness about good practices. In this study methods related to manual handling risk assessment were described, focus on KIM method used in Foundry Elblag. Key Item Method allow to estimate the risk by simple calculation based on key indicators (time rating points, rating points of mass, posture or work condition. Points were chosen based on timekeeping, information from workers and foreman.

Radioactive wastes handling problems in Venezuela

International Nuclear Information System (INIS)

Ramirez, R.; Venegas, R.

1984-07-01

A brief description of the radioactive wastes problem in Venezuela is presented. The origins of the problem are shown in a squematic form. The requirements for its solution are divided into three parts: information system, control system, radioactive wastes hadling system. A questionnaire summarizing factors to be considered when looking for a solution to the problem in Venezuela is included, as well as conclusions and recomendations for further discussion

SHOOT2.0: An indirect grid shooting package for optimal control problems, with switching handling and embedded continuation

OpenAIRE

Martinon , Pierre; Gergaud , Joseph

2010-01-01

The SHOOT2.0 package implements an indirect shooting method for optimal control problems. It is specifically designed to handle control discontinuities, with an automatic switching detection that requires no assumptions concerning the number of switchings. Special care is also devoted to the computation of the Jacobian matrix of the shooting function, using the variational system instead of classical finite differences. The package also features an embedded continuation method and an automati...

Fuel handling machine and auxiliary systems for a fuel handling cell

International Nuclear Information System (INIS)

Suikki, M.

2013-10-01

This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

Fuel handling machine and auxiliary systems for a fuel handling cell

Energy Technology Data Exchange (ETDEWEB)

Suikki, M. [Optimik Oy, Turku (Finland)

2013-10-15

This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

An Exception Handling Service for Software Agent Ensembles

National Research Council Canada - National Science Library

Klein, Mark

2004-01-01

... (I) the creation of better contingent contracts between agents (both human and software- based) as well as (2) exception-handling agents that monitor MAS for problem symptoms, diagnose the underlying problems, and intervene as appropriate to avoid or resolve these problems.

Regional action plan handling of social welfare problem in nganjuk regency

Science.gov (United States)

Zain, IM; Utami, WS; Setyawan, KG

2018-01-01

Local action plans are expected to ensure a social protection for vulnerable and disadvantaged groups or PMKS. The method used in this research is by primary survey and secondary survey. The condition of the people who still belong to PMKS requires the state to come to the community to solve the problems faced. Stakeholders should be involved to handle PMKS. The activities presented should also receive periodic monitoring and evaluation so that there is progress reporting at any time. Implementable poverty reduction strategies and policies are social protection strategies, opportunity expansion strategies, resource capacity building strategies, community empowerment strategies and partnership strategies. The flow of PMKS is the validation and updating of data, the fulfillment of the basic needs of the PMKS family, the development of PMKS human resources, the improvement of the quality of life for poor families, the institutions of poverty alleviation stakeholders and the unemployed at the base level. The Regional Action Plan (RAP) is prepared as a reference in the context of carrying out PMKS mitigation which is expected to serve as a guide for managers and program implementers with relevant agencies that are conducted jointly and continuously for the period of time specified.

Immunogenicity of biopharmaceuticals and biosimilars in relation to storage, handling and stability

International Nuclear Information System (INIS)

Hincal, F.

2009-01-01

Therapeutic proteins or biopharmaceuticals provide effective treatment for many diseases and medical conditions, and vaccines, immunoglobulins and monoclonal antibodies are critical biodefense biopharmaceuticals which constitute an indispensable part of biodefense stockpiles. The manufacturing process for biopharmaceuticals and their generic forms which are called biosimilars is far more complex than for low molecular weight drugs and generics. Any minor change made at any stage may have a critical effect on the clinical efficacy and safety. Potential immunogenicity is the key issue for biopharmaceuticals and biosimilars and may have serious clinical consequences ranging from allergy and anaphylaxis, as well as loss of efficacy of the product. Immunogenicity may be influenced by factors related to manufacturing process, formulation, aggregate formation, contaminants and impurities, and also by the factors related to the storage and handling. Stability is particularly important with larger protein molecules, because their in vivo effects often depend on their three-dimensional structure. Proteins usually aggregate from partially unfolded molecules and aggregates can enhance immunogenicity. Although product formulations are developed to maximize and maintain the fraction of the protein molecules present in the native state, significant amounts of aggregates can form, especially over pharmaceutically relevant time scales and under stress conditions. Exposure to air-liquid and solid-liquid interfaces, light, temperature fluctuations or minor impurities can induce aggregation. Such exposure can occur during processing steps, as well as in the final product container during storage, shipment and handling. Biopharmaceuticals are particularly sensitive to temperature changes and/or shaking. Strict storage and handling conditions and timely and effective stability/shelf-life testing are therefore essential for maintaining product integrity and stability, and hence efficacy

Fleet Sizing of Automated Material Handling Using Simulation Approach

Science.gov (United States)

Wibisono, Radinal; Ai, The Jin; Ratna Yuniartha, Deny

2018-03-01

Automated material handling tends to be chosen rather than using human power in material handling activity for production floor in manufacturing company. One critical issue in implementing automated material handling is designing phase to ensure that material handling activity more efficient in term of cost spending. Fleet sizing become one of the topic in designing phase. In this research, simulation approach is being used to solve fleet sizing problem in flow shop production to ensure optimum situation. Optimum situation in this research means minimum flow time and maximum capacity in production floor. Simulation approach is being used because flow shop can be modelled into queuing network and inter-arrival time is not following exponential distribution. Therefore, contribution of this research is solving fleet sizing problem with multi objectives in flow shop production using simulation approach with ARENA Software

Handling of potassium

International Nuclear Information System (INIS)

Schwarz, N.; Komurka, M.

1983-03-01

As a result for the Fast Breeder Development extensive experience is available worldwide with respect to Sodium technology. Due to the extension of the research program to topping cycles with Potassium as the working medium, test facilities with Potassium have been designed and operated in the Institute of Reactor Safety. The different chemical properties of Sodium and Potassium give rise in new safety concepts and operating procedures. The handling problems of Potassium are described in the light of theoretical properties and own experiences. Selected literature on main safety and operating problems complete this report. (Author) [de

Development of remote handling tools for glove box

International Nuclear Information System (INIS)

Tomita, Yutaka; Nemoto, Takeshi; Denuma, Akio; Todokoro, Akio

1996-01-01

For a part of advanced nuclear fuel recycling technology development, we will separate and recover Americium from the MOX fuel scrap by solvent extraction. When we carry this examination, reduction of exposure from Americium-241 is one of important problems. To solve this problem fundamentally, we studied many joints type of the remote handling tools for glove box and produced a trial production machine. Also, we carried out basic function examinations of it. As a result, we got the prospect of development of the remote handling tools which could treat Americium in glove box. (author)

Study on new-type fuel-related assembly handling tools for PWR NPP

International Nuclear Information System (INIS)

Fan Xiumei

2013-01-01

This article describes the design and study on a set of new-type fuel-related assembly snatching tools used for PWR NPP. The purpose is mainly to enhance the tool safety, reliability and convenientness by improvement of the mechanism and structure of the tool for snatching preciseness and avoiding from falling and abrasion of fuel-related assemblies for any condition. The new-type fuel-related assembly handling tools are compared with similar equipment in worldwide in terms of function, main technical characteristic, and safety and protection, some of them are better than the similar equipment in that they have reliable loading and unloading and conveying capabilities. (author)

Fast Computation of Categorical Richness on Raster Data Sets and Related Problems

DEFF Research Database (Denmark)

de Berg, Mark; Tsirogiannis, Constantinos; Wilkinson, Bryan

2015-01-01

that runs in O(n) time and one for circular windows that runs in O((1+K/r)n) time, where K is the number of different categories appearing in G. The algorithms are not only very efficient in theory, but also in practice: our experiments show that our algorithms can handle raster data sets of hundreds...... of millions of cells. The categorical richness problem is related to colored range counting, where the goal is to preprocess a colored point set such that we can efficiently count the number of colors appearing inside a query range. We present a data structure for colored range counting in R^2 for the case......In many scientific fields, it is common to encounter raster data sets consisting of categorical data, such as soil type or land usage of a terrain. A problem that arises in the presence of such data is the following: given a raster G of n cells storing categorical data, compute for every cell c...

Data-handling system for the Fly's Eye experiment

International Nuclear Information System (INIS)

Bergeson, H.E.; Cassiday, G.L.; Cooper, D.A.

1975-01-01

The Fly's Eye air scintillation experiment presents severe data-handling requirements for two reasons. First, nearly 1,000 photomultipliers each produce outputs at rates from 100 Khz to 20 Mhz. Second, much of the signal arrives before a trigger is formed. A data handling system which will deal with this problem is described. (orig.) [de

A model for transfer baggage handling at airports

DEFF Research Database (Denmark)

Barth, Torben C.; Timler Holm, Janus; Lindorff Larsen, Jakob

This work deals with the handling of baggage from passengers changing aircraft at an airport. The transfer baggage problem is to assign the bags from each arriving aircraft to an infeed area into the airport infrastructure. The infrastructure will then distribute the bags to the handling faciliti...... is studied and future approaches for improving robustness are discussed. The presented solution approach runs successfully as part of the operation control systems at Frankfurt Airport since 2008.......This work deals with the handling of baggage from passengers changing aircraft at an airport. The transfer baggage problem is to assign the bags from each arriving aircraft to an infeed area into the airport infrastructure. The infrastructure will then distribute the bags to the handling facilities...... and robustness. The model can be solved with a commercial MIP-solver. Furthermore, the use of the model in the dynamic environment during daily operations is introduced. The model includes two different approaches for increasing the robustness of the generated solutions. The uncertainty of the input data...

Traction-related problems after hip arthroscopy

Science.gov (United States)

Lund, Bent; Grønbech Nielsen, Torsten; Lind, Martin

2017-01-01

Abstract Traction-related problems are poorly described in the existing literature. The purpose of this prospective study was to describe traction-related problems and how patients perceive these problems. The study was a descriptive cohort study and data were collected from questionnaires and patient files. The questionnaire included questions on patients’ perceptions of traction-related problems in the groin area, at the knee and ankle and how patients had coped with these problems. A total of 100 consecutive patients undergoing hip arthroscopy filled out the questionnaire. Primary findings of this study were that 74% of patients reported some sort of traction-related problems after hip arthroscopy. About 32% of the patients had problems in the groin area and 49% of the patients complained of symptoms in the knee joint. A total of 37% of the patients had experienced problems from the traction boot in the ankle area. The complications were found to be temporary and disappeared after 2–4 weeks. Five patients still had complaints after 3 months. All five patients had a pre-existing knee injury prior to undergoing hip arthroscopy. Traction-related problems after hip arthroscopy are a challenge and our study showed that 74% of the patients reported traction-related problems. This is significantly higher than previously reported. The present study found a high rate of complaints from the knee and ankle joints that have not previously been reported. The presented data suggest the need for more pre-surgery patient information about possible traction-related problems. PMID:28630721

American Nurses Association position statement on elimination of manual patient handling to prevent work-related musculoskeletal disorders.

Science.gov (United States)

In order to establish a safe environment for nurses and patients, the American Nurses Association (ANA) supports actions and policies that result in the elimination of manual patient handling. Patient handling, such as lifting, repositioning, and transferring, has conventionally been performed by nurses. The performance of these tasks exposes nurses to increased risk for work-related musculoskeletal disorders. With the development of assistive equipment, such as lift and transfer devices, the risk of musculoskeletal injury can be significantly reduced. Effective use of assistive equipment and devices for patient handling creates a safe healthcare environment by separating the physical burden from the nurse and ensuring the safety, comfort, and dignity of the patient.

Troubleshooting for the observed problems in processing latex concentrate from natural resource

International Nuclear Information System (INIS)

Afreen, S; Haque, K R; Huda, M K

2013-01-01

Natural latex has special importance in the rubber industry for manufacturing different types of goods like gloves, balloons, male contraceptive and similar thin walled articles. This natural latex is much more sensitive a liquid to handle since it can easily become contaminated and thereby coagulated which makes it unfavourable for centrifuge and getting concentrate from it. Some other related measures also are included in consideration during the processing of concentrate latex from the natural raw latex. The problems that are being faced in a concentrate latex processing plant can be categorized in different groups like, problems related to the latex property, mechanical problems, electrical problems, handling and storage problems, transformation problems, problems related to environmental issues, etc. Among them, the most common and vital problems frequently observed in a concentrate latex processing plant are discussed here with a view to finding the measures for solution which will help to maintain the latex property in any latex processing plant.

Constrained Optimization Based on Hybrid Evolutionary Algorithm and Adaptive Constraint-Handling Technique

DEFF Research Database (Denmark)

Wang, Yong; Cai, Zixing; Zhou, Yuren

2009-01-01

A novel approach to deal with numerical and engineering constrained optimization problems, which incorporates a hybrid evolutionary algorithm and an adaptive constraint-handling technique, is presented in this paper. The hybrid evolutionary algorithm simultaneously uses simplex crossover and two...... mutation operators to generate the offspring population. Additionally, the adaptive constraint-handling technique consists of three main situations. In detail, at each situation, one constraint-handling mechanism is designed based on current population state. Experiments on 13 benchmark test functions...... and four well-known constrained design problems verify the effectiveness and efficiency of the proposed method. The experimental results show that integrating the hybrid evolutionary algorithm with the adaptive constraint-handling technique is beneficial, and the proposed method achieves competitive...

Safety measuring for sodium handling

Energy Technology Data Exchange (ETDEWEB)

Jeong, Ji Young; Jeong, K C; Kim, T J; Kim, B H; Choi, J H

2001-09-01

This is the report for the safety measures of sodium handling. These contents are prerequisites for the development of sodium technology and thus the workers participate in sodium handling and experiments have to know them perfectly. As an appendix, the relating parts of the laws are presented.

Software for handling MFME1

International Nuclear Information System (INIS)

Van der Merwe, W.G.

1984-01-01

The report deals with SEMFIP, a computer code for determining magnetic field measurements. The program is written in FORTRAN and ASSEMBLER. The preparations for establishing SEMFIP, the actual measurements, data handling and the problems that were experienced are discussed. Details on the computer code are supplied in an appendix

Cellular Manufacturing System with Dynamic Lot Size Material Handling

Science.gov (United States)

Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

2016-02-01

Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

MHSS: a material handling system simulator

Energy Technology Data Exchange (ETDEWEB)

Pomernacki, L.; Hollstien, R.B.

1976-04-07

A Material Handling System Simulator (MHSS) program is described that provides specialized functional blocks for modeling and simulation of nuclear material handling systems. Models of nuclear fuel fabrication plants may be built using functional blocks that simulate material receiving, storage, transport, inventory, processing, and shipping operations as well as the control and reporting tasks of operators or on-line computers. Blocks are also provided that allow the user to observe and gather statistical information on the dynamic behavior of simulated plants over single or replicated runs. Although it is currently being developed for the nuclear materials handling application, MHSS can be adapted to other industries in which material accountability is important. In this paper, emphasis is on the simulation methodology of the MHSS program with application to the nuclear material safeguards problem. (auth)

Experience in handling core subassemblies in sodium cooled reactor KNK and test rigs

International Nuclear Information System (INIS)

Althaus; Jansing; Kesseler; Kirchner; Menck

1974-01-01

Compared with a water cooled reactor plant a sodium cooled reactor plant presents a number of problems which result from the specific nature of sodium. These problems that must be faced during all handling operations are mainly: 1. The rapid reaction of sodium in air requires handling to be done only under cover gas. 2. The temperature of all sodium-wetted components is to be kept above the melting point of sodium. 3. Poor draining of removed reactor components due to the high surface tension of sodium and the associated danger of dripping radioactive sodium may produce radiation or contamination problems. 4. Sodium is not transparent. The sum of these and further influences dictate that the general handling usually is carried out without visual means, though a method is under development in the USA to use ultrasonic for under sodium 'viewing'. These limitations to sodium component handling are applicable to all sodium reactor plants, several of which are discussed in this report. After the description of the handling systems of the KNK plant now operating at Karlsruhe, the experience with the SNR test rig and finally the handling systems for SNR 300 and SNR 2 are discussed

Ground Handling Business at Non-European Biggest World Airports as a Problem of Market Structures

Directory of Open Access Journals (Sweden)

Anna Tomová

2015-12-01

Full Text Available In the paper we analyse the market structures of ground handling at the biggest non-European passenger and cargo airports in accordance with the ACI list of the most important world airports in 2014. Using the IATA IGHC database as of spring 2015, our analysis revealed that out of Europe double digit numbers of providers are rare what contrasts with situation in Europe where ground handling markets were deregulated by the Council Directive 96/67/EC. The analysis also brought that the monopolistic structures of ground handling markets were more specific for the regions of Asia and the Middle East. Airports as ground handling providers were not found within the analysed sample in North America, Latin America, Africa and Australia and Oceania, while this arrangement was to a larger extent present at the analysed Asian airports. Asia and the Middle East biggest airports are identified by us as candidates for further deregulation of ground handling arguing by forecasted demand for air services in the regions, although expected deregulation may be curbed by national regulators.

Money handling influences BMI: a survey of cashiers

OpenAIRE

Shraddha Karve; Ketaki Shurpali; Neelesh Dahanukar; Maithili Jog; Milind Watve

2008-01-01

Money is a recent phenomenon in the evolutionary history of man and therefore no separate brain centre to handle money is likely to have evolved. The brain areas activated by food reward and money reward are extensively overlapping. In an experimental set-up, hunger was demonstrated to influence money related decisions and money related thoughts to influence hunger. This suggests that the brain areas evolved for handling food related emotions are exapted to handle money and therefore there co...

Remote technology related to the handling, storage and disposal of spent fuel. Proceedings of a technical committee meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

Reduced radiation exposure, greater reliability and cost savings are all potential benefits of the application of remote technologies to the handling of spent nuclear fuel. Remote equipment and technologies are used to some extent in all facilities handling fuel and high-level wastes whether they are for interim storage, processing/repacking, reprocessing or disposal. In view of the use and benefits of remote technologies, as well as recent technical and economic developments in the area, the IAEA organized the Technical Committee Meeting (TCM) on Remote Technology Related to the Handling, Storage and/or Disposal of Spent Fuel. Twenty-one papers were presented at the TCM, divided into five general areas: 1. Choice of technologies; 2. Use of remote technologies in fuel handling; 3. Use of remote technologies for fuel inspection and characterization; 4. Remote maintenance of facilities; and 5. Current and future developments. Refs, figs and tabs.

Safety of Cargo Aircraft Handling Procedure

Directory of Open Access Journals (Sweden)

Daniel Hlavatý

2017-07-01

Full Text Available The aim of this paper is to get acquainted with the ways how to improve the safety management system during cargo aircraft handling. The first chapter is dedicated to general information about air cargo transportation. This includes the history or types of cargo aircraft handling, but also the means of handling. The second part is focused on detailed description of cargo aircraft handling, including a description of activities that are performed before and after handling. The following part of this paper covers a theoretical interpretation of safety, safety indicators and legislative provisions related to the safety of cargo aircraft handling. The fourth part of this paper analyzes the fault trees of events which might occur during handling. The factors found by this analysis are compared with safety reports of FedEx. Based on the comparison, there is a proposal on how to improve the safety management in this transportation company.

Crud handling circuit

International Nuclear Information System (INIS)

Smith, J.C.; Manuel, R.J.; McAllister, J.E.

1981-01-01

A process for handling the problems of crud formation during the solvent extraction of wet-process phosphoric acid, e.g. for uranium and rare earth removal, is described. It involves clarification of the crud-solvent mixture, settling, water washing the residue and treatment of the crud with a caustic wash to remove and regenerate the solvent. Applicable to synergistic mixtures of dialkylphosphoric acids and trialkylphosphine oxides dissolved in inert diluents and more preferably to the reductive stripping technique. (U.K.)

Specialization and Flexibility in Port Cargo Handling

Directory of Open Access Journals (Sweden)

Hakkı KİŞİ

2016-11-01

Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

Ergonomics and patient handling.

Science.gov (United States)

McCoskey, Kelsey L

2007-11-01

This study aimed to describe patient-handling demands in inpatient units during a 24-hour period at a military health care facility. A 1-day total population survey described the diverse nature and impact of patient-handling tasks relative to a variety of nursing care units, patient characteristics, and transfer equipment. Productivity baselines were established based on patient dependency, physical exertion, type of transfer, and time spent performing the transfer. Descriptions of the physiological effect of transfers on staff based on patient, transfer, and staff characteristics were developed. Nursing staff response to surveys demonstrated how patient-handling demands are impacted by the staff's physical exertion and level of patient dependency. The findings of this study describe the types of transfers occurring in these inpatient units and the physical exertion and time requirements for these transfers. This description may guide selection of the most appropriate and cost-effective patient-handling equipment required for specific units and patients.

How problems of storing waste nuclear fuel are handled in some countries

International Nuclear Information System (INIS)

Langhe, R.

1983-01-01

This report is a survey of the situation in a number of European countries, in the United States and the Soviet Union as well. In all democratic countries, the nuclear power issue is controversial. Everywhere it has met with opposition and criticism, even in countries where nuclear power is officially promoted. Which of the elements comprised in the nuclear power issue is regarded as most controversial varies from country to country. In some countries, final storage and handling of waste nuclear fuel are referred to this category, in others nuclear power plant safety is claimed to be of greater importance. In the last few months, some public opinion has been coupling the peaceful use of nuclear power with nuclear weapons, thereby deeming the greatest danger to be the risk of unwanted distribution of nuclear weapons. Technical difficulties as well as public opinion have indefinitely adjourned the final solution of the disposal of waste nuclear fuel. This problem is of such magnitude that a final solution is urgently needed. Apart from opinions, the existence of waste nuclear power fuel emitting dangerous radiation for over 40 generations to come, makes it a moral obligation to find a way to spare future generations that heritage. (author)

Age-related loss of early grasp affordance when viewing a safety handle

OpenAIRE

McDannald, Doug

2018-01-01

Age-related loss of early grasp affordance when viewing a safety handle Author: D.W. McDannald1, , M. Mansour2, G. Rydalch3, D.A.E. Bolton1 Mere observation of objects in our surroundings can potentiate movement, a fact reflected by visually-primed activation of motor cortical networks. This mechanism holds potential value for reactive balance control where recovery actions of the arms or legs must be targeted to a new support base to avoid a fall. The present study was conducted to test if t...

Optimal Scheduling of Material Handling Devices in a PCB Production Line: Problem Formulation and a Polynomial Algorithm

Directory of Open Access Journals (Sweden)

Ada Che

2008-01-01

Full Text Available Modern automated production lines usually use one or multiple computer-controlled robots or hoists for material handling between workstations. A typical application of such lines is an automated electroplating line for processing printed circuit boards (PCBs. In these systems, cyclic production policy is widely used due to large lot size and simplicity of implementation. This paper addresses cyclic scheduling of a multihoist electroplating line with constant processing times. The objective is to minimize the cycle time, or equivalently to maximize the production throughput, for a given number of hoists. We propose a mathematical model and a polynomial algorithm for this scheduling problem. Computational results on randomly generated instances are reported.

Alternative Constraint Handling Technique for Four-Bar Linkage Path Generation

Science.gov (United States)

Sleesongsom, S.; Bureerat, S.

2018-03-01

This paper proposes an extension of a new concept for path generation from our previous work by adding a new constraint handling technique. The propose technique was initially designed for problems without prescribed timing by avoiding the timing constraint, while remain constraints are solving with a new constraint handling technique. The technique is one kind of penalty technique. The comparative study is optimisation of path generation problems are solved using self-adaptive population size teaching-learning based optimization (SAP-TLBO) and original TLBO. In this study, two traditional path generation test problem are used to test the proposed technique. The results show that the new technique can be applied with the path generation problem without prescribed timing and gives better results than the previous technique. Furthermore, SAP-TLBO outperforms the original one.

The Swedish drug problem: Conceptual understanding and problem handling, 1839–2011

Directory of Open Access Journals (Sweden)

Edman Johan

2014-12-01

Full Text Available AIM - To analyse the Swedish drug question by examining dominant concepts used to portray the problem in the years 1839-2011. Theoretically, we understand these concepts as ideological tools that shape the political initiatives and administrative efforts to deal with the problem. The study is based on two kinds of source material: articles in medical journals from the years 1839-1964 and public reports on vagrancy, the alcohol problem, mental health and the drug problem from the years 1882-2011.

Public health implications of post-harvest fish handling practices in ...

African Journals Online (AJOL)

A wide range of handling practices for harvested fish exists and they have economic as well as public health implications. This paper is a review of the existing problems in fish handling technologies at post-harvest in Nigeria. The public health aspects with the associated implications are highlighted. Status of policy on fish ...

30o inclination in handles of plastic boxes can reduce postural and muscular workload during handling

Directory of Open Access Journals (Sweden)

Luciana C. C. B. Silva

2013-06-01

Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.

Traction-related problems after hip arthroscopy

DEFF Research Database (Denmark)

Frandsen, Lone; Lund, Bent; Grønbech Nielsen, Torsten

2017-01-01

. The questionnaire included questions on patients' perceptions of traction-related problems in the groin area, at the knee and ankle and how patients had coped with these problems. A total of 100 consecutive patients undergoing hip arthroscopy filled out the questionnaire. Primary findings of this study were that 74......% of patients reported some sort of traction-related problems after hip arthroscopy. About 32% of the patients had problems in the groin area and 49% of the patients complained of symptoms in the knee joint. A total of 37% of the patients had experienced problems from the traction boot in the ankle area....... The complications were found to be temporary and disappeared after 2-4 weeks. Five patients still had complaints after 3 months. All five patients had a pre-existing knee injury prior to undergoing hip arthroscopy. Traction-related problems after hip arthroscopy are a challenge and our study showed that 74...

Automation of 3D micro object handling process

DEFF Research Database (Denmark)

Gegeckaite, Asta; Hansen, Hans Nørgaard

2007-01-01

Most of the micro objects in industrial production are handled with manual labour or in semiautomatic stations. Manual labour usually makes handling and assembly operations highly flexible, but slow, relatively imprecise and expensive. Handling of 3D micro objects poses special challenges due to ...

Radiological safety aspects of handling plutonium

International Nuclear Information System (INIS)

Sundararajan, A.R.

2016-01-01

Department of Atomic Energy in its scheme of harnessing the nuclear energy for electrical power generation and strategic applications has given a huge role to utilization of plutonium. In the power production programme, fast reactors with plutonium as fuel are expected to play a major role. This would require establishing fuel reprocessing plants to handle both thermal and fast reactor fuels. So in the nuclear fuel cycle facilities variety of chemical, metallurgical, mechanical operations have to be carried out involving significant inventories of "2"3"9 Pu and associated radionuclides. Plutonium is the most radiotoxic radionuclide and therefore any facility handling it has to be designed and operated with utmost care. Two problems of major concern in the protection of persons working in plutonium handling facilities are the internal exposure to the operating personnel from uptake of plutonium and transplutonic nuclides as they are highly radiotoxic and the radiation exposure of hands and eye lens during fuel fabrication operations especially while handling recycled high burn up plutonium. In view of the fact that annual limit for intake is very small for "2"3"9Pu and its radiation emission characteristics are such that it is a huge challenge for the health physicists to detect Pu in air and in workers. This paper discusses the principles and practices followed in providing radiological surveillance to workers in plutonium handling areas. The challenges in protecting the workers from receiving exposures to hands and eye lens in handling high burn up plutonium are also discussed. The sites having Pu fuel cycle facilities should have trained medical staff to handle cases involving excessive intake of plutonium. (author)

The prevention and handling of the missing data

OpenAIRE

Kang, Hyun

2013-01-01

Even in a well-designed and controlled study, missing data occurs in almost all research. Missing data can reduce the statistical power of a study and can produce biased estimates, leading to invalid conclusions. This manuscript reviews the problems and types of missing data, along with the techniques for handling missing data. The mechanisms by which missing data occurs are illustrated, and the methods for handling the missing data are discussed. The paper concludes with recommendations for ...

TRANSPORT/HANDLING REQUESTS

CERN Multimedia

Groupe ST/HM

2002-01-01

A new EDH document entitled 'Transport/Handling Request' will be in operation as of Monday, 11th February 2002, when the corresponding icon will be accessible from the EDH desktop, together with the application instructions. This EDH form will replace the paper-format transport/handling request form for all activities involving the transport of equipment and materials. However, the paper form will still be used for all vehicle-hire requests. The introduction of the EDH transport/handling request form is accompanied by the establishment of the following time limits for the various services concerned: 24 hours for the removal of office items, 48 hours for the transport of heavy items (of up to 6 metric tons and of standard road width), 5 working days for a crane operation, extra-heavy transport operation or complete removal, 5 working days for all transport operations relating to LHC installation. ST/HM Group, Logistics Section Tel: 72672 - 72202

The relationship of interpersonal conflict handling styles and marital conflicts among Iranian divorcing couples.

Science.gov (United States)

Navidian, Ali; Bahari, Farshad; Kermansaravi, Fatihe

2014-08-15

Various research studies have suggested that among other variables that couples remain married if they successfully manage their interactions (marital communication based on acceptance of individual differences, problem solving skills, forgiveness, collaborative decision making, empathy and active listening) and constructively manage conflict. The study was aimed at examining the relation of conflict handling styles and marital conflicts among divorcing couples. As a descriptive -comparative study 60 couples out of 440 couples referred to the Crisis Intervention Center of the Isfahan Well-being Organization have selected. The tools implemented were Marital Conflicts (Barati & Sanaei, 1996) and Interpersonal Conflict Handling Styles Questionnaires (Thomas-Kilman, 1975). Their total reliabilities were, respectively, 0.74 and 0.87. Findings showed that there are no significant differences among their conflict handling styles and marital conflicts. Also, there was positive correlation between avoidance and competition styles and negative one between compromise, accommodation, and cooperation styles with marital conflicts. That is, these styles reduced couples' conflicts. Finally, wives had tendency to apply accommodation style and husbands tended to use accommodation and cooperation styles to handle their conflicts. It is suggested to be studied couples' views toward their own styles to handle marital conflicts and holding training courses to orient couples with advantages and disadvantages of marital conflict handling styles.

Handling data redundancy and update anomalies in fuzzy relational databases

International Nuclear Information System (INIS)

Chen, G.; Kerre, E.E.

1996-01-01

This paper discusses various data redundancy and update anomaly problems that may occur with fuzzy relational databases. In coping with these problems to avoid undesirable consequences when fuzzy databases are updated via data insertion, deletion and modification, a number of fuzzy normal forms (e.g., F1NF, 0-F2NF, 0-F3NF, 0-FBCNF) are used to guide the design of relation schemes such that partial and transitive fuzzy functional dependencies (FFDs) between relation attributes are restricted. Based upon FFDs and related concepts, particular attention is paid to 0-F3NF and 0-FBCNF, and to the corresponding decomposition algorithms. These algorithms not only produce relation schemes which are either in 0-F3NF or in 0-FBCNF, but also guarantee that the information (data content and FFDs) with original schemes can be recovered with those resultant schemes

Overview of Crane Control Systems and the Related Problems: Analysis of Container Oscillation Using Different Types of Cargoes

Directory of Open Access Journals (Sweden)

Tomas Eglynas

2016-04-01

Full Text Available Growing international trading increased cargo transportation in containers, therefore the port cranes have higher loads. Increased cargo flows can influence transportation safety. It is therefore necessary to review the crane systems and determine what factors might influence the volatility of the container and its cargo during transportation. The paper includes consideration and analysis of crane control systems and related problems. The authors consider the reasons of problems, probable damage and solution methods. The paper also provides the analysis of the relationship between different container cargoes and container oscillations occurring during handling operations using a container crane prototype. The analysis of the effect of different cargoes in containers on loading process and the results of occurring oscillations are presented.

Large-scale matrix-handling subroutines 'ATLAS'

International Nuclear Information System (INIS)

Tsunematsu, Toshihide; Takeda, Tatsuoki; Fujita, Keiichi; Matsuura, Toshihiko; Tahara, Nobuo

1978-03-01

Subroutine package ''ATLAS'' has been developed for handling large-scale matrices. The package is composed of four kinds of subroutines, i.e., basic arithmetic routines, routines for solving linear simultaneous equations and for solving general eigenvalue problems and utility routines. The subroutines are useful in large scale plasma-fluid simulations. (auth.)

Financial Management and Financial Problems As They Relate to Marital Satisfaction in Early Marriage

OpenAIRE

Kerkmann, Barbara C.

1998-01-01

The financial management habits and perceptions of young married couples were examined, as well as their financial problems and perceptions of their problems' magnitude in an attempt to assess the relationship of these financial factors to marital satisfaction. A survey was delivered to 604 residents of family student housing at Utah State University. The spouse who predominantly handled family finances was asked to complete the survey. By using an incentive for completing the survey, a respo...

A Cybernetic Approach to Assess the Longitudinal Handling Qualities of Aeroelastic Aircraft

NARCIS (Netherlands)

Damveld, H.J.

2009-01-01

The future demand for larger and lighter civil transport aircraft leads to more flexible aircraft, which bring their own controlling and handling problems. A review of established handling qualities methods showed that they were either unsuitable for aeroelastic aircraft, or had significant

Syrlic: a Lagrangian code to handle industrial problems involving particles and droplets

International Nuclear Information System (INIS)

Peniguel, C.

1997-01-01

Numerous industrial applications require to solve droplets or solid particles trajectories and their effects on the flow. (fuel injection in combustion engine, agricultural spraying, spray drying, spray cooling, spray painting, particles separator, dispersion of pollutant, etc). SYRLIC is being developed to handle the dispersed phase while the continuous phase is tackled by classical Eulerian codes like N3S-EF, N3S-NATUR, ESTET. The trajectory of each droplet is calculated on unstructured grids or structured grids according the Eulerian code with SYRLIC is coupled. The forces applied to each particle are recalculated along each path. The Lagrangian approach treats the convection and the source terms exactly. It is particularly adapted to problems involving a wide range of particles characteristics (diameter, mass, etc). In the near future, wall interaction, heat transfer, evaporation more complex physics, etc, will be included. Turbulent effects will be accounted for by a Langevin equation. The illustration shows the trajectories followed by water droplets (diameter from 1 mm to 4 mm) in a cooling tower. the droplets are falling down due to gravity but are deflected towards the center of the tower because of a lateral wind. It is clear that particles are affected differently according their diameter. The Eulerian flow field used to compute the forces has been generated by N3S-AERO, on an unstructured mesh

Construction and commissioning of workrooms for handling of unsealed radioactive materials

International Nuclear Information System (INIS)

Weinhold, G.; Jost, E.; Koenig, W.

1976-03-01

The requirements prescribed for planning, design and construction of type II and III workrooms for handling of unsealed sources are outlined. The 'Guide Concerning Construction and Equipment of Rooms for Handling of Radioactive Materials' is explained and supplemented in part. Furthermore, problems of radiation protection organization and measuring techniques are discussed. (author)

Regulations on handling dangerous objects in Japan (with particular reference to sodium)

International Nuclear Information System (INIS)

Nagai, M.

1971-01-01

Sodium is designated as a kind of dangerous object, so that special care has to be taken in handling or storing large amounts of sodium. Formal regulations on sodium handling in Japan are prescribed in Fire Service Law, which is supplemented by Rules on Handling Dangerous Objects. Since these regulations are not intended to be applied to large sodium circuits, some defects and inappropriate expressions might be found in them. An attempt is made here to pick up these problems and important points from Japanese regulations on handling dangerous objects with particular reference to sodium

Advanced handling-systems with enhanced performance flexibility

International Nuclear Information System (INIS)

1986-04-01

This report describes the results of a project related to future applications and requirements for advanced handling systems. This report consists of six chapters. Following the description of the aims the tools for setting up the requirements for the handling systems including the experience during the data acquisition process is described. Furthermore some information is given about the current state of the art of robotics and manipulators. Of paramount importance are the descriptions of applications and related concepts in the following chapters leading to specific categories of advanced handling units. The paper closes with the description of the first concepts for realization. (orig./HP) [de

Occlusion Handling in Videos Object Tracking: A Survey

International Nuclear Information System (INIS)

Lee, B Y; Liew, L H; Cheah, W S; Wang, Y C

2014-01-01

Object tracking in video has been an active research since for decades. This interest is motivated by numerous applications, such as surveillance, human-computer interaction, and sports event monitoring. Many challenges related to tracking objects still remain, this can arise due to abrupt object motion, changing appearance patterns of objects and the scene, non-rigid object structures and most significant are occlusion of tracked object be it object-to-object or object-to-scene occlusions. Generally, occlusion in object tracking occur under three situations: self-occlusion, inter-object occlusion by background scene structure. Self-occlusion occurs most frequently while tracking articulated objects when one part of the object occludes another. Inter-object occlusion occurs when two objects being tracked occlude each other whereas occlusion by the background occurs when a structure in the background occludes the tracked objects. Typically, tracking methods handle occlusion by modelling the object motion using linear and non-linear dynamic models. The derived models will be used to continuously predicting the object location when a tracked object is occluded until the object reappears. Example of these method are Kalman filtering and Particle filtering trackers. Researchers have also utilised other features to resolved occlusion, for example, silhouette projections, colour histogram and optical flow. We will present some result from a previously conducted experiment when tracking single object using Kalman filter, Particle filter and Mean Shift trackers under various occlusion situation in this paper. We will also review various other occlusion handling methods that involved using multiple cameras. In a nutshell, the goal of this paper is to discuss in detail the problem of occlusion in object tracking and review the state of the art occlusion handling methods, classify them into different categories, and identify new trends. Moreover, we discuss the important

Occlusion Handling in Videos Object Tracking: A Survey

Science.gov (United States)

Lee, B. Y.; Liew, L. H.; Cheah, W. S.; Wang, Y. C.

2014-02-01

Object tracking in video has been an active research since for decades. This interest is motivated by numerous applications, such as surveillance, human-computer interaction, and sports event monitoring. Many challenges related to tracking objects still remain, this can arise due to abrupt object motion, changing appearance patterns of objects and the scene, non-rigid object structures and most significant are occlusion of tracked object be it object-to-object or object-to-scene occlusions. Generally, occlusion in object tracking occur under three situations: self-occlusion, inter-object occlusion by background scene structure. Self-occlusion occurs most frequently while tracking articulated objects when one part of the object occludes another. Inter-object occlusion occurs when two objects being tracked occlude each other whereas occlusion by the background occurs when a structure in the background occludes the tracked objects. Typically, tracking methods handle occlusion by modelling the object motion using linear and non-linear dynamic models. The derived models will be used to continuously predicting the object location when a tracked object is occluded until the object reappears. Example of these method are Kalman filtering and Particle filtering trackers. Researchers have also utilised other features to resolved occlusion, for example, silhouette projections, colour histogram and optical flow. We will present some result from a previously conducted experiment when tracking single object using Kalman filter, Particle filter and Mean Shift trackers under various occlusion situation in this paper. We will also review various other occlusion handling methods that involved using multiple cameras. In a nutshell, the goal of this paper is to discuss in detail the problem of occlusion in object tracking and review the state of the art occlusion handling methods, classify them into different categories, and identify new trends. Moreover, we discuss the important

Ergonomics: safe patient handling and mobility.

Science.gov (United States)

Hallmark, Beth; Mechan, Patricia; Shores, Lynne

2015-03-01

This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

The Relationship of Interpersonal Conflict Handling Styles and Marital Conflicts Among Iranian Divorcing Couples

Science.gov (United States)

Navidian, Ali; Bahari, Farshad; Kermansaravi, Fatihe

2014-01-01

Background: Various research studies have suggested that among other variables that couples remain married if they successfully manage their interactions (marital communication based on acceptance of individual differences, problem solving skills, forgiveness, collaborative decision making, empathy and active listening) and constructively manage conflict. Purpose: The study was aimed at examining the relation of conflict handling styles and marital conflicts among divorcing couples. Methods: As a descriptive–comparative study 60 couples out of 440 couples referred to the Crisis Intervention Center of the Isfahan Well-being Organization have selected. The tools implemented were Marital Conflicts (Barati & Sanaei, 1996) and Interpersonal Conflict Handling Styles Questionnaires (Thomas-Kilman, 1975). Their total reliabilities were, respectively, 0.74 and 0.87. Results: Findings showed that there are no significant differences among their conflict handling styles and marital conflicts. Also, there was positive correlation between avoidance and competition styles and negative one between compromise, accommodation, and cooperation styles with marital conflicts. That is, these styles reduced couples’ conflicts. Finally, wives had tendency to apply accommodation style and husbands tended to use accommodation and cooperation styles to handle their conflicts. Conclusions: It is suggested to be studied couples’ views toward their own styles to handle marital conflicts and holding training courses to orient couples with advantages and disadvantages of marital conflict handling styles. PMID:25363128

Combating wear in bulk solids handling plants

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

A total of five papers presented at a seminar on problems of wear caused by abrasive effects of materials in bulk handling. Topics of papers cover the designer viewpoint, practical experience from the steel, coal, cement and quarry industries to create an awareness of possible solutions.

Low-level radioactive wastes: Their treatment, handling, disposal

Energy Technology Data Exchange (ETDEWEB)

Straub, Conrad P [Robert A. Taft Sanitary Engineering Center, Radiological Health Research Activities, Cincinnati, OH(United States)

1964-07-01

The release of low level wastes may result in some radiation exposure to man and his surroundings. This book describes techniques of handling, treatment, and disposal of low-level wastes aimed at keeping radiation exposure to a practicable minimum. In this context, wastes are considered low level if they are released into the environment without subsequent control. This book is concerned with practices relating only to continuous operations and not to accidental releases of radioactive materials. It is written by use for those interested in low level waste disposal problems and particularly for the health physicist concerned with these problems in the field. It should be helpful also to water and sewage works personnel concerned with the efficiency of water and sewage treatment processes for the removal of radioactive materials; the personnel engaged in design, construction, licensing, and operation of treatment facilities; and to student of nuclear technology. After an introduction the following areas are discussed: sources, quantities and composition of radioactive wastes; collection, sampling and measurement; direct discharge to the water, soil and air environment; air cleaning; removal of radioactivity by water-treatment processes and biological processes; treatment on site by chemical precipitation , ion exchange and absorption, electrodialysis, solvent extraction and other methods; treatment on site including evaporation and storage; handling and treatment of solid wastes; public health implications. Appendices include a glossary; standards for protection against radiation; federal radiation council radiation protection guidance for federal agencies; site selection criteria for nuclear energy facilities.

Remote handling equipment for SNS

International Nuclear Information System (INIS)

Poulten, B.H.

1983-01-01

This report gives information on the areas of the SNS, facility which become highly radioactive preventing hands-on maintenance. Levels of activity are sufficiently high in the Target Station Area of the SNS, especially under fault conditions, to warrant reactor technology to be used in the design of the water, drainage and ventilation systems. These problems, together with the type of remote handling equipment required in the SNS, are discussed

Conceptual design report for a remotely operated cask handling system

International Nuclear Information System (INIS)

Yount, J.A.; Berger, J.D.

Recent advances in remote handling utilizing commercial robotics are conceptually applied to the problem of lowering operator cumulative dose and increasing throughput during cask handling operations in proposed nuclear waste container shipping and receiving facilities. The functional criteria for each subsystem are defined, and candidate systems are described. The report also contains a generic description of a waste receiving facility, to show possible deployment configurations for the equipment

The claims handling process of liability insurance in South Africa

Directory of Open Access Journals (Sweden)

Jacoline van Jaarsveld

2015-04-01

Full Text Available Liabilities play a very important financial role in business operations, professional service providers as well as in the personal lives of people. It is possible that a single claim may even lead to the bankruptcy of the defendant. The claims handling process of liability insurance by short-term insurers is therefore very important to these parties as it should be clear that liability claims may have enormous and far-reaching financial implications for them. The objective of this research paper embodies the improvement of financial decision-making by short-term insurers with regard to the claims handling process of liability insurance. Secondary data was initially studied which provided the basis to compile a questionnaire for the empirical survey. The leaders of liability insurance in the South African short-term insurance market that represented 69.5% of the annual gross written premiums received for liability insurance in South Africa were the respondents of the empirical study. The perceptions of these short-term insurers provided the primary data for the vital conclusions of this research. This paper pays special attention to the importance of the claims handling factors of liability insurance, how often the stipulations of liability insurance policies are adjusted by the short-term insurers to take the claims handling factors into consideration, as well as the problem areas which short-term insurers may experience during the claims handling process. Feasible solutions to address the problem areas are also discussed.

Spent fuel cask handling at an operating nuclear power plant

International Nuclear Information System (INIS)

Pal, A.C.

1988-01-01

The importance of spent fuel handling at operating nuclear power plants cannot be overstated. Because of its highly radioactive nature, however, spent fuel must be handled in thick, lead-lined containers or casks. Thus, all casks for spent fuel handling are heavy loads by the US Nuclear Regulatory Commission's definition, and any load-drop must be evaluated for its potential to damage safety-related equipment. Nuclear Regulatory Guide NUREG-0612 prescribes the regulatory requirements of alternative heavy-load-handling methodologies such as (a) by providing cranes that meet the requirements of NUREG-0554, which shall be called the soft path, or (b) by providing protective devices at all postulated load-drop areas to prevent any damage to safety-related equipment, which shall be called the hard path. The work reported in this paper relates to cask handling at New York Power Authority's James A. FitzPatrick (JAF) plant

Management of transport and handling contracts

CERN Document Server

Rühl, I

2004-01-01

This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.

A dynamic programming algorithm for the space allocation and aisle positioning problem

DEFF Research Database (Denmark)

Bodnar, Peter; Lysgaard, Jens

2014-01-01

The space allocation and aisle positioning problem (SAAPP) in a material handling system with gravity flow racks is the problem of minimizing the total number of replenishments over a period subject to practical constraints related to the need for aisles granting safe and easy access to storage...

Faktor Risiko Manual Handling dengan Keluhan Nyeri Punggung Bawah Pembuat Batu Bata

Directory of Open Access Journals (Sweden)

Heru Subaris Kasjono

2017-08-01

Full Text Available During done manual work handling for objects work hard, it will cause risk of injury or cause musculoskeletal systems. Risk assessment manual work handling with the methods indicators key-Leitmerkmal Method (LMM intended to know the relationship between time, burden, attitudes of the body, and working conditions manual handling with complaints of the lower back pain at all stages making bricks perceived maker bricks. The kind of research used is surveyed such data is cross sectional. The data taken by lower back pain questionnaire assisted examination physically by nurses and checklist Key-LMM. Analysis relations use the spearman. The results of research acquired at variable time manual handling based frequency raised or operation the transfer of on stage excavation raw materials, the formation and drying bricks there are relations with complaints of  low back pain with p value each are 0,039, 0,047, 0,038 while on the variables of working conditions manual handling in stage excavation raw materials obtained p value of 0,028 with so it can be said there was a correlation between working conditions manual handling with complaints low back pain. A variable load manual handling and attitudes of the body manual handling do not relate in significant to lower back pain all stages making bricks. Conclusion researchers that the variable time manual handling relate in significant with complaints lower back pain in stage excavation raw materials, the formation and drying bricks, while the phase processing raw materials that there was no correlation, in a variable load manual handling and attitudes of the body manual handling all these stage there was no correlation with complaints lower back pain, while variable working conditions manual handling only in stage excavation the raw materials there are relations with complaints lower back pain in the third stage other there was no correlation.

The natural angle between the hand and handle and the effect of handle orientation on wrist radial/ulnar deviation during maximal push exertions.

Science.gov (United States)

Young, Justin G; Lin, Jia-Hua; Chang, Chien-Chi; McGorry, Raymond W

2013-01-01

The purpose of this experiment was to quantify the natural angle between the hand and a handle, and to investigate three design factors: handle rotation, handle tilt and between-handle width on the natural angle as well as resultant wrist radial/ulnar deviation ('RUD') for pushing tasks. Photographs taken of the right upper limb of 31 participants (14 women and 17 men) performing maximal seated push exertions on different handles were analysed. Natural hand/handle angle and RUD were assessed. It was found that all of the three design factors significantly affected natural handle angle and wrist RUD, but participant gender did not. The natural angle between the hand and the cylindrical handle was 65 ± 7°. Wrist deviation was reduced for handles that were rotated 0° (horizontal) and at the narrow width (31 cm). Handles that were tilted forward 15° reduced radial deviation consistently (12-13°) across handle conditions. Manual materials handling (MMH) tasks involving pushing have been related to increased risk of musculoskeletal injury. This study shows that handle orientation influences hand and wrist posture during pushing, and suggests that the design of push handles on carts and other MMH aids can be improved by adjusting their orientation to fit the natural interface between the hand and handle.

Musculoskeletal complaints among nurses related to patient handling tasks and psychosocial factors - Based on logbook registrations

DEFF Research Database (Denmark)

Warming, S.; Precht, D.H.; Suadicani, P.

2009-01-01

The aims were to evaluate the inter-method reliability of a registration sheet for patient handling tasks, to study the day-to-day variation of musculoskeletal complaints (MSC) and to examine whether patient handling tasks and psychosocial factors were associated with MSC. Nurses (n = 148...... transfer and care tasks. The numbers of nurses reporting MSC and the level of pain increased significantly during the three working days (15%-30% and 17%-37%, respectively) and decreased on the day off. Stress and transfer task were associated with LPB and transfer tasks were associated with KP. Our...... results confirm a relationship between work factors and MSC and indicate that logs could be one way to obtain a better understanding of the complex interaction of various nursing working conditions in relation to MSC. (C) 2008 Elsevier Ltd. All rights reserved Udgivelsesdato: 2009/7...

Safe handling of radiation sources

International Nuclear Information System (INIS)

Abd Nasir Ibrahim; Azali Muhammad; Ab Razak Hamzah; Abd Aziz Mohamed; Mohammad Pauzi Ismail

2004-01-01

This chapter discussed the subjects related to the safe handling of radiation sources: type of radiation sources, method of use: transport within premises, transport outside premises; Disposal of Gamma Sources

Generic Planning and Control of Automated Material Handling Systems: Practical Requirements Versus Existing Theroy.

NARCIS (Netherlands)

Haneyah, S.W.A.; Zijm, Willem H.M.; Schutten, Johannes M.J.; Schuur, Peter

2011-01-01

This paper discusses the problem of generic planning and control of Automated Material Handling Systems (AMHSs). The paper illustrates the relevance of this research direction, and then addresses three different market sectors where AMHSs are used. These market sectors are: baggage handling,

Generic planning and control of automated material handling systems : practical requirements versus existing theory

NARCIS (Netherlands)

Haneyah, S.W.A.; Schutten, Johannes M.J.; Schuur, Peter; Zijm, Willem H.M.

2013-01-01

This paper discusses the problem to design a generic planning and control architecture for utomated material handling systems (AMHSs). We illustrate the relevance of this research direction, and then address three different market sectors where AMHSs are used, i.e., baggage handling, distribution,

Advanced robotics handling and controls applied to Mixed Waste characterization, segregation and treatment

International Nuclear Information System (INIS)

Grasz, E.; Huber, L.; Horvath, J.; Roberson, P.; Wilhelmsen, K.; Ryon, R.

1994-11-01

At Lawrence Livermore National Laboratory under the Mixed Waste Operations program of the Department of Energy Robotic Technology Development Program (RTDP), a key emphasis is developing a total solution to the problem of characterizing, handling and treating complex and potentially unknown mixed waste objects. LLNL has been successful at looking at the problem from a system perspective and addressing some of the key issues including non-destructive evaluation of the waste stream prior to the materials entering the handling workcell, the level of automated material handling required for effective processing of the waste stream objects (both autonomous and tele-operational), and the required intelligent robotic control to carry out the characterization, segregation, and waste treating processes. These technologies were integrated and demonstrated in a prototypical surface decontamination workcell this past year

Tritium handling experience at Atomic Energy of Canada Limited

Energy Technology Data Exchange (ETDEWEB)

Suppiah, S.; McCrimmon, K.; Lalonde, S.; Ryland, D.; Boniface, H.; Muirhead, C.; Castillo, I. [Atomic Energy of Canad Limited - AECL, Chalk River Laboratories, Chalk River, ON (Canada)

2015-03-15

Canada has been a leader in tritium handling technologies as a result of the successful CANDU reactor technology used for power production. Over the last 50 to 60 years, capabilities have been established in tritium handling and tritium management in CANDU stations, tritium removal processes for heavy and light water, tritium measurement and monitoring, and understanding the effects of tritium on the environment. This paper outlines details of tritium-related work currently being carried out at Atomic Energy of Canada Limited (AECL). It concerns the CECE (Combined Electrolysis and Catalytic Exchange) process for detritiation, tritium-compatible electrolysers, tritium permeation studies, and tritium powered batteries. It is worth noting that AECL offers a Tritium Safe-Handling Course to national and international participants, the course is a mixture of classroom sessions and hands-on practical exercises. The expertise and facilities available at AECL is ready to address technological needs of nuclear fusion and next-generation nuclear fission reactors related to tritium handling and related issues.

Travel-related health problems in Japanese travelers.

Science.gov (United States)

Mizuno, Yasutaka; Kudo, Koichiro

2009-09-01

Although the number of Japanese individuals traveling abroad has increased steadily, reaching approximately 17.3 million in 2007, the incidence of various travel-related health problems in Japan remains unknown. The travel-related health problems of Japanese travelers returning to Japan from abroad are analyzed by assessing the records. Data were collected retrospectively on returning travelers who visited the authors' travel clinic during the period from January 2005 through to December 2006 with any health problem acquired overseas. A total of 345 patients were included in this study (200 male, 145 female; average age, 34+/-12.3 years). Reasons for travel included leisure (45.8%); business (39.1%); visiting friends and relatives or accompanying other travelers (8.7%); volunteering (3.8%); and long stays in order to study or live (2.6%). The most visited destination was Asia (n=260), followed by Africa (n=105). The most commonly reported health problems were gastro-intestinal infections (39.1%), followed by respiratory tract infections (16.2%), animal bites (8.1%), and skin problems (5.8%). Together, malaria and dengue accounted for 10% of diagnoses in 125 febrile patients (36.2%). Although the profile of travel-related health problems in Japanese travelers is similar to that of Western travelers, the characteristics of travel were quite different. Therefore Japanese travel advice should be tailored to suit the Japanese traveler.

It comes with the territory handling problem situations in libraries, rev ed

CERN Document Server

Turner, Anne M

2004-01-01

""Practical...useful""--Booklist; ""order this book immediately...interesting...entertaining and educational...outstanding...timely and useful--a must for all sizes and types of libraries""--Library Journal; ""good...recommended""--Public Libraries; ""Turner has revised and updated this classic guidebook that provides creative and sensible ways for handling sticky situations in public libraries""--SRRT Newletter; ""highly recommended""--Public Services Quarterly; ""well written...engaging...very helpful and timely""--Reference Quarterly

A Solution Approach to Assembly Line Balancing Problem With Task Related Constraints and an Application At An Enterprise

Directory of Open Access Journals (Sweden)

Serkan Altuntaş

2010-01-01

Full Text Available Occasionally certain tasks in an assembly line balancing problem are required to be kept together due to some specific reasons. These tasks are attained to the same work stations. Such problems are called as 'Assembly Line Balancing Problem with Task Related Constraints (ALBTRC'. Certain situations like awkward product construction, simultaneous operations or specific requirements leading to zoning and positional constraints like utilization of common resources as tools, jigs and fixtures are implemented thanks to these supplementary constraints. Additionally, materials handling and tooling costs, distances, set-up and lead times are also reduced. Literature on ALBTRC seems quite rare compared to Classical Line Balancing papers, although ALBTRC is one of the common real life balancing problems. This study aimed to develop and implement a novel line balancing method for a manufacturing concern where known methods are impractical to employ due to some specific positional constraints. 'Largest Candidate Method' known as a simple but effective tool is modified for this purpose first. Then a thorough 'method and time study' is conducted to get the necessary data to utilize that method. As a result, more efficient alternatives are generated and presented to decision maker.

Handling of multiassembly sealed baskets between reactor storage and a remote handling facility

International Nuclear Information System (INIS)

Massey, J.V.; Kessler, J.H.; McSherry, A.J.

1989-06-01

The storage of multiple fuel assemblies in sealed (welded) dry storage baskets is gaining increasing use to augment at-reactor fuel storage capacity. Since this increasing use will place a significant number of such baskets on reactor sites, some initial downstream planning for their future handling scenarios for retrieving multi-assembly sealed baskets (MSBs) from onsite storage and transferring and shipping the fuel (and/or the baskets) to a federally operated remote handling facility (RHF). Numerous options or at-reactor and away-from-reactor handling were investigated. Materials handling flowsheets were developed along with conceptual designs for the equipment and tools required to handle and open the MSBs. The handling options were evaluated and compared to a reference case, fuel handling sequence (i.e., fuel assemblies are taken from the fuel pool, shipped to a receiving and handling facility and placed into interim storage). The main parameters analyzed are throughout, radiation dose burden and cost. In addition to evaluating the handling of MSBs, this work also evaluated handling consolidated fuel canisters (CFCs). In summary, the handling of MSBs and CFCs in the store, ship and bury fuel cycle was found to be feasible and, under some conditions, to offer significant benefits in terms of throughput, cost and safety. 14 refs., 20 figs., 24 tabs

Safety handling manual for high dose rate remote afterloading system

International Nuclear Information System (INIS)

1999-01-01

This manual is mainly for safety handling of 192 Ir-RALS (remote afterloading system) of high dose rate and followings were presented: Procedure and document format for the RALS therapy and for handling of its radiation source with the purpose of prevention of human errors and unexpected accidents, Procedure for preventing errors occurring in the treatment schedule and operation, and Procedure and format necessary for newly introducing the system into a facility. Consistency was intended in the description with the quality assurance guideline for therapy with small sealed radiation sources made by JASTRO (Japan Society for Therapeutic Radiology and Oncology). Use of the old type 60 Co-RALS was pointed out to be a serious problem remained and its safety handling procedure was also presented. (K.H.)

Computer Use and Vision.Related Problems Among University ...

African Journals Online (AJOL)

Related Problems Among University Students In Ajman, United Arab Emirate. ... of 500 Students studying in Gulf Medical University, Ajman and Ajman University of ... prevalence of vision related problems was noted among university students.

Nuclear fuel handling apparatus

International Nuclear Information System (INIS)

Andrea, C.; Dupen, C.F.G.; Noyes, R.C.

1977-01-01

A fuel handling machine for a liquid metal cooled nuclear reactor in which a retractable handling tube and gripper are lowered into the reactor to withdraw a spent fuel assembly into the handling tube. The handling tube containing the fuel assembly immersed in liquid sodium is then withdrawn completely from the reactor into the outer barrel of the handling machine. The machine is then used to transport the spent fuel assembly directly to a remotely located decay tank. The fuel handling machine includes a decay heat removal system which continuously removes heat from the interior of the handling tube and which is capable of operating at its full cooling capacity at all times. The handling tube is supported in the machine from an articulated joint which enables it to readily align itself with the correct position in the core. An emergency sodium supply is carried directly by the machine to provide make up in the event of a loss of sodium from the handling tube during transport to the decay tank. 5 claims, 32 drawing figures

A Numerical Framework for Self-Similar Problems in Plasticity: Indentation in Single Crystals

DEFF Research Database (Denmark)

Juul, Kristian Jørgensen; Niordson, Christian Frithiof; Nielsen, Kim Lau

A new numerical framework specialized for analyzing self-similar problems in plasticity is developed. Self-similarity in plasticity is encountered in a number of different problems such as stationary cracks, void growth, indentation etc. To date, such problems are handled by traditional Lagrangian...... procedures that may be associated with severe numerical difficulties relating to sufficient discretization, moving contact points, etc. In the present work, self-similarity is exploited to construct the numerical framework that offers a simple and efficient method to handle self-similar problems in history...... numerical simulations [3] when possible. To mimic the condition for the analytical predictions, the wedge indenter is considered nearly flat and the material is perfectly plastic with a very low yield strain. Under these conditions, [1][2] proved analytically the existence of discontinuities in the slip...

Handling equipment Selection in open pit mines by using an integrated model based on group decision making

Directory of Open Access Journals (Sweden)

Abdolreza Yazdani-Chamzini

2012-10-01

Full Text Available Process of handling equipment selection is one of the most important and basic parts in the project planning, particularly mining projects due to holding a high charge of the total project's cost. Different criteria impact on the handling equipment selection, while these criteria often are in conflicting with each other. Therefore, the process of handling equipment selection is a complex and multi criteria decision making problem. There are a variety of methods for selecting the most appropriate equipment among a set of alternatives. Likewise, according to the sophisticated structure of the problem, imprecise data, less of information, and inherent uncertainty, the usage of the fuzzy sets can be useful. In this study a new integrated model based on fuzzy analytic hierarchy process (FAHP and fuzzy technique for order preference by similarity to ideal solution (FTOPSIS is proposed, which uses group decision making to reduce individual errors. In order to calculate the weights of the evaluation criteria, FAHP is utilized in the process of handling equipment selection, and then these weights are inserted to the FTOPSIS computations to select the most appropriate handling system among a pool of alternatives. The results of this study demonstrate the potential application and effectiveness of the proposed model, which can be applied to different types of sophisticated problems in real problems.

Geospatial Big Data Handling Theory and Methods: A Review and Research Challenges

DEFF Research Database (Denmark)

Li, Songnian; Dragicevic, Suzana; Anton, François

2016-01-01

Big data has now become a strong focus of global interest that is increasingly attracting the attention of academia, industry, government and other organizations. Big data can be situated in the disciplinary area of traditional geospatial data handling theory and methods. The increasing volume...... for Photogrammetry and Remote Sensing (ISPRS) Technical Commission II (TC II) revisits the existing geospatial data handling methods and theories to determine if they are still capable of handling emerging geospatial big data. Further, the paper synthesises problems, major issues and challenges with current...... developments as well as recommending what needs to be developed further in the near future....

How the NWC handles software as product

Energy Technology Data Exchange (ETDEWEB)

Vinson, D.

1997-11-01

This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

Drug-related problems in patients with osteoporosis

Directory of Open Access Journals (Sweden)

Ilić Darko

2016-01-01

Full Text Available Background/Aim. Drug-related problems are especially frequent among patients suffering from non-communicable diseases, like osteoporosis, leading to suboptimal treatment response. The aim of this study was to identify drug-related problems in patients with osteoporosis. Methods. This cross-sectional prospective study was conducted in January 2014 on outpatients with osteoporosis from three health facilities in Belgrade, Serbia. The patients included in the study were older than 50 years, and they were offered an anonymous questionnaire with open-ended questions. Results. There were 355 study participants, 329 (92.7% females and 26 (7.3% males. The patients who experienced at least one osteoporotic fracture (n = 208 were significantly less adherent to the therapy, less engaged in sports and regular physical activities, and more prone to nutrition with inadequate intake of calcium and vitamin D than patients without fractures (n = 147. Conclusion. The effectiveness of osteoporosis treatment is decreased by several drug-related problems encountered by both physicians and patients. However, the majority of the drug-related problems could be greatly influenced by appropriate educational programs. [Projekat Ministarstva nauke Republike Srbije, br. 175007

MR imaging of meniscal bucket-handle tears: a review of signs and their relation to arthroscopic classification

International Nuclear Information System (INIS)

Aydingoez, Uestuen; Firat, Ahmet K.; Atay, Ahmet Oe.; Doral, Nedim M.

2003-01-01

Our objective was to review the MR imaging signs of meniscal bucket-handle tears and assess the relevance of these signs to the arthroscopic classification of displaced meniscal tears. Forty-five menisci in 42 patients who had a diagnosis of bucket-handle tear either on MR imaging or on subsequent arthroscopy (in which Dandy's classification of meniscal tears was used) were retrospectively analyzed for MR imaging findings of double posterior cruciate ligament (PCL), fragment within the intercondylar notch, absent bow tie, flipped meniscus, double-anterior horn, and disproportional posterior horn signs. Arthroscopy, which was considered as the gold standard, revealed 41 bucket-handle tears (either diagnosed or not diagnosed by MR imaging) in 38 patients (33 males, 5 females). There was a stastistically significant male preponderance for the occurrence of meniscal bucket-handle tears. Overall, sensitivity and positive predictive value of MR imaging for the detection of meniscal bucket-handle tears were calculated as 90%. Common MR imaging signs of meniscal bucket-handle tears in arthroscopically proven cases of such tears were the fragment in the notch and absent bow tie signs (98% frequency for each). Double-PCL, flipped meniscus, double-anterior horn, and disproportional posterior horn signs, however, were less common (32, 29, 29, and 27%, respectively). An arthroscopically proven bucket-handle tear was found in all patients who displayed at least three of the six MR imaging signs of meniscal bucket-handle tears. The presence of three or more MR imaging signs of meniscal bucket-handle tears is highly suggestive of this condition. (orig.)

Uranium hexafluoride handling

International Nuclear Information System (INIS)

1991-01-01

The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF 6 from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride

Drug-related problems identified in medication reviews by Australian pharmacists

DEFF Research Database (Denmark)

Stafford, Andrew C; Tenni, Peter C; Peterson, Gregory M

2009-01-01

OBJECTIVE: In Australia, accredited pharmacists perform medication reviews for patients to identify and resolve drug-related problems. We analysed the drug-related problems identified in reviews for both home-dwelling and residential care-facility patients. The objective of this study was to exam......OBJECTIVE: In Australia, accredited pharmacists perform medication reviews for patients to identify and resolve drug-related problems. We analysed the drug-related problems identified in reviews for both home-dwelling and residential care-facility patients. The objective of this study....... These reviews had been self-selected by pharmacists and submitted as part of the reaccreditation process to the primary body responsible for accrediting Australian pharmacists to perform medication reviews. The drug-related problems identified in each review were classified by type and drugs involved. MAIN...... OUTCOME MEASURE: The number and nature of drug-related problems identified in pharmacist-conducted medication reviews. RESULTS: There were 1,038 drug-related problems identified in 234 medication reviews (mean 4.6 (+/-2.2) problems per review). The number of problems was higher (4.9 +/- 2.0 vs. 3.9 +/- 2...

Trends in remote handling device development

International Nuclear Information System (INIS)

Raimondi, T.

1991-01-01

A brief review is given of studies on layouts and methods for handling some major components requiring remote maintenance in future fusion reactors: Neutral sources and beam lines, the blanket, divertor plates, armour tiles and vacuum pumps. Comparison is made to problems encountered in JET, methods and equipment used and development work done there. Areas requiring development and research are outlined. These include topics which are the subject of papers presented here, such as dynamic studies and control of transporters, improvements to the man-machine interface and hot cell equipment. A variety of other topics where effort is needed are also mentioned: Environmental tolerance of components and equipment, TV viewing and compensation of viewing difficulties with aids such as computer graphics and image processing, safety assessment, computer aids for remote manipulation, remote cutting and welding techniques, routine in-vessel inspection methods and selection of connectors and flanges for remote handling. (orig.)

PGDP [Paducah Gaseous Diffusion Plant]-UF6 handling, sampling, analysis and associated QC/QA and safety related procedures

International Nuclear Information System (INIS)

Harris, R.L.

1987-01-01

This document is a compilation of Paducah Gaseous Diffusion Plant procedures on UF 6 handling, sampling, and analysis, along with associated QC/QA and safety related procedures. It was assembled for transmission by the US Department of Energy to the Korean Advanced Energy Institute as a part of the US-Korea technical exchange program

Little Evidence That Time in Child Care Causes Externalizing Problems During Early Childhood in Norway

Science.gov (United States)

Zachrisson, Henrik Daae; Dearing, Eric; Lekhal, Ratib; Toppelberg, Claudio O.

2012-01-01

Associations between maternal reports of hours in child care and children’s externalizing problems at 18 and 36 months of age were examined in a population-based Norwegian sample (n = 75,271). Within a sociopolitical context of homogenously high-quality child care, there was little evidence that high quantity of care causes externalizing problems. Using conventional approaches to handling selection bias and listwise deletion for substantial attrition in this sample, more hours in care predicted higher problem levels, yet with small effect sizes. The finding, however, was not robust to using multiple imputation for missing values. Moreover, when sibling and individual fixed-effects models for handling selection bias were used, no relation between hours and problems was evident. PMID:23311645

Redefining NHS complaint handling--the real challenge.

Science.gov (United States)

Seelos, L; Adamson, C

1994-01-01

More and more organizations find that a constructive and open dialogue with their customers can be an effective strategy for building long-term customer relations. In this context, it has been recognized that effective complaint-contact handling can make a significant contribution to organizations' attempts to maximize customer satisfaction and loyalty. Within the NHS, an intellectual awareness exists that effective complaint/contact handling can contribute to making services more efficient and cost-effective by developing customer-oriented improvement initiatives. Recent efforts have focused on redefining NHS complaint-handling procedures to make them more user-friendly and effective for both NHS employees and customers. Discusses the challenges associated with opening up the NHS to customer feedback. Highlights potential weaknesses in the current approach and argues that the real challenge is for NHS managers to facilitate a culture change that moves the NHS away from a long-established defensive complaint handling practice.

A trim-loss minimization in a produce-handling vehicle production plant

Directory of Open Access Journals (Sweden)

Apichai Ritvirool

2007-01-01

Full Text Available How to cut out the required pieces from raw materials by minimizing waste is a trim-loss problem. The integer linear programming (ILP model was developed to solve this problem. In addition, this ILPmodel could be used for planning an order over some future time period. Time horizon of ordering raw material including weekly, monthly, quarterly, and annually could be planned to reduce the trim loss. Thenumerical examples using an industrial case study of a produce-handling vehicle production plant were presented to illustrate how the proposed ILP model could be applied to actual systems and the types ofinformation that was obtained relative to implementation. The results showed that the proposed ILP model can be used as a decision support tool for selecting time horizon of order planning and cutting patterns todecrease material cost and waste from cutting raw material.

Towards a better mastery of risks in the handling of nuclear fuel: the contributions of ergonomics

International Nuclear Information System (INIS)

Samson, L.

1999-01-01

Nuclear fuel is handled under water in the reactor pool using procedures that have yet to be automated. The knowledge and skill of the operators is therefore of prime importance. Ergonomic consultants have prepared a report on the problems facing the operators when handling nuclear fuel? These problems have been addressed by the installation of a new system to detect and prevent incorrect operator commands and to provide software assistance in planning movements together with diagnostic functions. The new system has resulted in considerable time savings and a reduction in the risk of error. However, it has been necessary to modify the control software in the light of the handling strategies traditionally used by the operators. (author)

Ergonomics of disposable handles for minimally invasive surgery.

Science.gov (United States)

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

Dust prevention in bulk material transportation and handling

Science.gov (United States)

Kirichenko, A. V.; Kuznetsov, A. L.; Pogodin, V. A.

2017-10-01

The environmental problem of territory and atmosphere pollution caused by transportation and handling of dust-generating bulk cargo materials is quite common for the whole world. The reducing of weight of fine class coal caused by air blowing reaches the level of 0.5-0.6 t per railcar over the 500 km transportation distance, which is equal to the loss of 1 % of the total weight. The studies showed that all over the country in the process of the railroad transportation, the industry loses 3-5 metric tonnes of coal annually. There are several common tactical measurers to prevent dust formation: treating the dust-producing materials at dispatch point with special liquid solutions; watering the stacks and open handling points of materials; frequent dust removing and working area cleaning. Recently there appeared several new radical measures for pollution prevention in export of ore and coal materials via sea port terminals, specifically: wind-dust protection screens, the container cargo handling system of delivery materials to the hold of the vessels. The article focuses on the discussion of these measures.

Coal handling system structural analysis for modifications or plant life extension

International Nuclear Information System (INIS)

Dufault, A.; Weider, F.; Doyle, P.

1989-01-01

One neglected aspect of plant modification or life extension is the extent to which previous projects may have affected the integrity of existing structures. During the course of a project to backfit fire protection facilities to existing coal handling systems, it was found that past modifications had added loads to existing coal handling structures which exceeded the available design margin. This paper describes the studies that discovered the original problem areas, as well as the detailed analysis and design considerations used to repair these structures

SOS! Ayuda para Padres: Una Guia Practica para Manejar Problemas de Conducta Comunes y Corrientes. (SOS! Help for Parents: A Practical Guide for Handling Common Everyday Behavior Problems.) Leader's Guide.

Science.gov (United States)

Clark, Lynn

This Spanish-language version of "SOS" provides parents with guidance for handling a variety of common behavior problems based on the behavior approach to child rearing and discipline. This approach suggests that good and bad behavior are both learned and can be changed, and proposes specific methods, skills, procedures, and strategies…

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

Science.gov (United States)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

Aircraft model prototypes which have specified handling-quality time histories

Science.gov (United States)

Johnson, S. H.

1978-01-01

Several techniques for obtaining linear constant-coefficient airplane models from specified handling-quality time histories are discussed. The pseudodata method solves the basic problem, yields specified eigenvalues, and accommodates state-variable transfer-function zero suppression. The algebraic equations to be solved are bilinear, at worst. The disadvantages are reduced generality and no assurance that the resulting model will be airplane like in detail. The method is fully illustrated for a fourth-order stability-axis small motion model with three lateral handling quality time histories specified. The FORTRAN program which obtains and verifies the model is included and fully documented.

Handling nuclear waste over long periods

International Nuclear Information System (INIS)

Ancelin, B.; Chenevier, E.

1983-01-01

The handling of nuclear waste over long periods throws up new problems, such as the safety for a very long term and the employment of economic logic in order to justify choices involving extended time scales. The result is a very great difficulty of apprehension of the problem by the specialists as well as by the public. A clear policy decision, associated with a coherent administrative organization, will therefore have to make up for an impossible technical-economical optimization of the various possible options. The difficulty of simple technical choices is only going to reinforce this wish; the absence of a global and comparative measuring system is responsible for the fact that in this field the passions often override many of the scientific truths [fr

EARTH RESOURCE PROBLEMS AND RELATED ENVIRONMENTAL CONSIDERATIONS

Directory of Open Access Journals (Sweden)

Orlitová Erika

1997-10-01

Full Text Available The paper discusses some of the problems of geology and earth resources management in relation to environmental problems of the technosphere. It deals also with some aspects of environmental monitoring of areas where surveying or mining operations are planned or in progress.

Remote handling needs of the Princeton Plasma Physics Laboratory

International Nuclear Information System (INIS)

Smiltnieks, V.

1982-07-01

This report is the result of a Task Force study commissioned by the Canadian Fusion Fuels Technology Project (CFFTP) to investigate the remote handling requirements at the Princeton Plasma Physics Laboratory (PPPL) and identify specific areas where CFFTP could offer a contractual or collaborative participation, drawing on the Canadian industrial expertise in remote handling technology. The Task Force reviewed four areas related to remote handling requirements; the TFTR facility as a whole, the service equipment required for remote maintenance, the more complex in-vessel components, and the tritium systems. Remote maintenance requirements both inside the vacuum vessel and around the periphery of the machine were identified as the principal areas where Canadian resources could effectively provide an input, initially in requirement definition, concept evaluation and feasibility design, and subsequently in detailed design and manufacture. Support requirements were identified in such areas as the mock-up facility and a variety of planning studies relating to reliability, availability, and staff training. Specific tasks are described which provide an important data base to the facility's remote handling requirements. Canadian involvement in the areas is suggested where expertise exists and support for the remote handling work is warranted. Reliability, maintenance operations, inspection strategy and decommissioning are suggested for study. Several specific components are singled out as needing development

Recommendations for cask features for robotic handling from the Advanced Handling Technology Project

International Nuclear Information System (INIS)

Drotning, W.

1991-02-01

This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs

Handling reality: three paths to understanding the knowledge society

Directory of Open Access Journals (Sweden)

Daniel Muriel

2009-11-01

Full Text Available The "knowledge society" hypothesis is a useful heuristic for understanding contemporary society after the crisis of modernity that arose in the second half of the 20th century.  I shall examine the ways in which reality can be handled (reality handlings, that is, all those material-semiotic practices  through which we try to influence the world that surrounds us. I shall focus especially on the epistemological problems of current scientific and political practices.  I conclude with three specific, but not mutually exclusive avenues that might (or might not help us fully articulate the idea of the "knowledge society": the modern-sociological, the actantial-articulative, and the genealogical.  

Depression and Related Problems in University Students

Science.gov (United States)

Field, Tiffany; Diego, Miguel; Pelaez, Martha; Deeds, Osvelia; Delgado, Jeannette

2012-01-01

Method: Depression and related problems were studied in a sample of 283 university students. Results: The students with high depression scores also had high scores on anxiety, intrusive thoughts, controlling intrusive thoughts and sleep disturbances scales. A stepwise regression suggested that those problems contributed to a significant proportion…

Modeling of uncertainties in statistical inverse problems

International Nuclear Information System (INIS)

Kaipio, Jari

2008-01-01

In all real world problems, the models that tie the measurements to the unknowns of interest, are at best only approximations for reality. While moderate modeling and approximation errors can be tolerated with stable problems, inverse problems are a notorious exception. Typical modeling errors include inaccurate geometry, unknown boundary and initial data, properties of noise and other disturbances, and simply the numerical approximations of the physical models. In principle, the Bayesian approach to inverse problems, in which all uncertainties are modeled as random variables, is capable of handling these uncertainties. Depending on the type of uncertainties, however, different strategies may be adopted. In this paper we give an overview of typical modeling errors and related strategies within the Bayesian framework.

Goals and everyday problem solving: examining the link between age-related goals and problem-solving strategy use.

Science.gov (United States)

Hoppmann, Christiane A; Coats, Abby Heckman; Blanchard-Fields, Fredda

2008-07-01

Qualitative interviews on family and financial problems from 332 adolescents, young, middle-aged, and older adults, demonstrated that developmentally relevant goals predicted problem-solving strategy use over and above problem domain. Four focal goals concerned autonomy, generativity, maintaining good relationships with others, and changing another person. We examined both self- and other-focused problem-solving strategies. Autonomy goals were associated with self-focused instrumental problem solving and generative goals were related to other-focused instrumental problem solving in family and financial problems. Goals of changing another person were related to other-focused instrumental problem solving in the family domain only. The match between goals and strategies, an indicator of problem-solving adaptiveness, showed that young individuals displayed the greatest match between autonomy goals and self-focused problem solving, whereas older adults showed a greater match between generative goals and other-focused problem solving. Findings speak to the importance of considering goals in investigations of age-related differences in everyday problem solving.

The Burnside problem and related topics

International Nuclear Information System (INIS)

Adian, Sergei I

2011-01-01

This paper gives a survey of results related to the famous Burnside problem on periodic groups. A negative solution of this problem was first published in joint papers of P.S. Novikov and the author in 1968. The theory of transformations of words in free periodic groups that was created in these papers and its various modifications give a very productive approach to the investigation of hard problems in group theory. In 1950 the Burnside problem gave rise to another problem on finite periodic groups, formulated by Magnus and called by him the restricted Burnside problem. Here it is called the Burnside-Magnus problem. In the Burnside problem the question of local finiteness of periodic groups of a given exponent was posed, but the Burnside-Magnus problem is the question of the existence of a maximal finite periodic group R(m,n) of a fixed period n with a given number m of generators. These problems complement each other. The publication in a joint paper by the author and Razborov in 1987 of the first effective proof of the well-known result of Kostrikin on the existence of a maximal group R(m,n) for any prime n, together with an indication of primitive recursive upper bounds for the orders of these groups, stimulated investigations of the Burnside-Magnus problem as well. Very soon other effective proofs appeared, and then Zel'manov extended Kostrikin's result to the case when n is any power of a prime number. These results are discussed in the last section of this paper. Bibliography: 105 titles.

Handling movement epenthesis and hand segmentation ambiguities in continuous sign language recognition using nested dynamic programming.

Science.gov (United States)

Yang, Ruiduo; Sarkar, Sudeep; Loeding, Barbara

2010-03-01

We consider two crucial problems in continuous sign language recognition from unaided video sequences. At the sentence level, we consider the movement epenthesis (me) problem and at the feature level, we consider the problem of hand segmentation and grouping. We construct a framework that can handle both of these problems based on an enhanced, nested version of the dynamic programming approach. To address movement epenthesis, a dynamic programming (DP) process employs a virtual me option that does not need explicit models. We call this the enhanced level building (eLB) algorithm. This formulation also allows the incorporation of grammar models. Nested within this eLB is another DP that handles the problem of selecting among multiple hand candidates. We demonstrate our ideas on four American Sign Language data sets with simple background, with the signer wearing short sleeves, with complex background, and across signers. We compared the performance with Conditional Random Fields (CRF) and Latent Dynamic-CRF-based approaches. The experiments show more than 40 percent improvement over CRF or LDCRF approaches in terms of the frame labeling rate. We show the flexibility of our approach when handling a changing context. We also find a 70 percent improvement in sign recognition rate over the unenhanced DP matching algorithm that does not accommodate the me effect.

The handling of data from experiments

CERN Document Server

Davies, H E

1974-01-01

The use of small computers in on-line experiments in high-energy physics is briefly indicated. The requirement for an above-average performance (data-handling rates up to 1.5 Mbit/sec) is described, emphasizing the problem of data acquisition; data rates and buffering, data storage, and the importance of flexibility are dealt with. The discussion of hardware solutions to the special problems posed by on- line experiments includes the use of CAMAC interfaces, systems of linked computers, and the use of special processors which perform the first steps of data analysis very rapidly. A section on the software solution to data acquisition problems treats the requirements for flexibility and ease of use, giving as an example a comparison of a manufacturer-supplied Editor and CERN's ORION Editor, and concludes with an outline of the need for direct access to more powerful computers, giving as an illustration the FOCUS and Omega/SFM networks. (0 refs).

Beginnings of remote handling at the RAL Spallation Neutron Source

International Nuclear Information System (INIS)

Liska, D.J.; Hirst, J.

1985-01-01

Expenditure of funds and resources for remote maintenance systems traditionally are delayed until late in an accelerator's development. However, simple remote-surveillance equipment can be included early in facility planning to set the stage for future remote-handling needs and to identify appropriate personnel. Some basic equipment developed in the UK at the Spallation Neutron Source (SNS) that serves this function and that has been used to monitor beam loss during commissioning is described. A photograph of this equipment, positioned over the extractor septum magnet, is shown. This method can serve as a pattern approach to the problem of initiating remote-handling activities in other facilities

Handling and transport problems (1960); Problemes de manipulation et de transport (1960)

Energy Technology Data Exchange (ETDEWEB)

Pomarola, J; Savouyaud, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1960-07-01

I. The handling and transport of radioactive wastes involves the danger of irradiation and contamination. It is indispensable: - to lay down a special set of rules governing the removal and transport of wastes within centres or from one centre to another; - to give charge of this transportation to a group containing teams of specialists. The organisation, equipment and output of these teams is being examined. II. Certain materials are particularly dangerous to transport, and for these special vehicles and fixed installations are necessary. This is the case especially for the evacuation of very active liquids. A transport vehicle is described, consisting of a trailer tractor and a recipient holding 500 litres of liquid of which the activity can reach 1000 C/l; the decanting operation, the route to be followed by the vehicle, and the precautions taken are also described. (author) [French] I. La manipulation et le transport des dechets radioactifs presentent des dangers d'irradiation et de contamination. Il est necessaire: - d'edicter des consignes speciales applicables a l'enlevement et au transport des dechets dans les centres ou de centre a centre; - de confier les transports a un groupe dont relevent des equipes specialisees; - on examine l'organisation, les moyens, le rendement de ces equipes. II. Certains transports sont particulierement dangereux et necessitent des engins speciaux et des installations fixes. C'est le cas, notamment de l'evacuation des liquides tres actifs. On decrit: - un engin de transport compose d'un ensemble a tracteur semi-remorque et d'un recipient qui contient 500 litres de liquide dont l'activite peut atteindre 1000 C/l; - les operations de transvasement, l'acheminement de l'engin, les precautions prises. (auteur)

Problem of medical follow-up and assessment of occupational disease in personnel handling radiation sources

International Nuclear Information System (INIS)

Klener, V.

1983-01-01

The long-term change in the health condition of 120 recorded cases of occupational disease owing to ionizing radiation in the years 1961 to 1981 was evaluated on the basis of the analysis of out-patient records in three regions of the Czech Socialist Republic. In the group the prevalent incidence was of carcinoma of the skin (86), alterations in blood formation (19), cataract (4) leukemia (2) and changes owing to single exposure usually with acute skin manifestations (9). Owing to the inadequate development of radiobiological knowledge and the lack of objective data on exposure, cases of transient leukopenia used to be put in direct relation with occupational exposure to ionizing radiation - this disorder always had a good long-term prognosis. At the present level of protection the determination of peripheral blood count made within preventive medical check-ups of personnel handling radiation sources has only partial significance and should be considered as complementary to the overall complex examination. (author)

Study on sociological approach to resolve maintenance related social problems

International Nuclear Information System (INIS)

Aoki, Takayuki

2007-01-01

This study proposes a sociological approach to resolve maintenance related social problems. As a result of consideration, the followings were found. (1) In general, solutions to some kinds of questions can be deduced from basic laws using some theories or methodologies in the field of the natural science or engineering. The approach to resolve maintenance related social problems is similar to the approach in the natural science or engineering. (2) The points of view based on fundamental human rights, market principles and community principles, and so on, are very important in resolving maintenance related social problems and can be placed as theories or tools for resolution. (3) If such theories or tools for resolving maintenance related social problems as described above are systematically prepared, it is estimated that it becomes very much easier to resolve maintenance related social problems. (author)

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

Relative Effects of Problem-Solving and Concept Mapping ...

African Journals Online (AJOL)

Relative Effects of Problem-Solving and Concept Mapping Instructional ... mapping strategies are also discussed and their significance and importance to students. ... development of problem solving skills before the end of SSCE Programmebr ...

The vanishing discount problem and viscosity Mather measures. Part 2: boundary value problems

OpenAIRE

Ishii, Hitoshi; Mitake, Hiroyoshi; Tran, Hung V.

2016-01-01

In arXiv:1603.01051 (Part 1 of this series), we have introduced a variational approach to studying the vanishing discount problem for fully nonlinear, degenerate elliptic, partial differential equations in a torus. We develop this approach further here to handle boundary value problems. In particular, we establish new representation formulas for solutions of discount problems, critical values, and use them to prove convergence results for the vanishing discount problems.

Performance of popular open source databases for HEP related computing problems

International Nuclear Information System (INIS)

Kovalskyi, D; Sfiligoi, I; Wuerthwein, F; Yagil, A

2014-01-01

Databases are used in many software components of HEP computing, from monitoring and job scheduling to data storage and processing. It is not always clear at the beginning of a project if a problem can be handled by a single server, or if one needs to plan for a multi-server solution. Before a scalable solution is adopted, it helps to know how well it performs in a single server case to avoid situations when a multi-server solution is adopted mostly due to sub-optimal performance per node. This paper presents comparison benchmarks of popular open source database management systems. As a test application we use a user job monitoring system based on the Glidein workflow management system used in the CMS Collaboration.

Problems related to fossil fuels utilization

International Nuclear Information System (INIS)

Rota, R.

1999-01-01

Fossil fuels still present the main energy source in the world since about 90% of the energy produced comes from combustion. This paper, based on the lectures given at the conference of Energy and Environment hold at the Accademia dei Lincei in 1998, presents a short review of some of the problems related to the utilization of fossil fuels, such as their availability in the medium period, the effect of pollutant dispersion in the atmosphere as well as the available technologies to deal with such problems [it

Automated system for handling tritiated mixed waste

International Nuclear Information System (INIS)

Dennison, D.K.; Merrill, R.D.; Reitz, T.C.

1995-03-01

Lawrence Livermore National Laboratory (LLNL) is developing a semi system for handling, characterizing, processing, sorting, and repackaging hazardous wastes containing tritium. The system combines an IBM-developed gantry robot with a special glove box enclosure designed to protect operators and minimize the potential release of tritium to the atmosphere. All hazardous waste handling and processing will be performed remotely, using the robot in a teleoperational mode for one-of-a-kind functions and in an autonomous mode for repetitive operations. Initially, this system will be used in conjunction with a portable gas system designed to capture any gaseous-phase tritium released into the glove box. This paper presents the objectives of this development program, provides background related to LLNL's robotics and waste handling program, describes the major system components, outlines system operation, and discusses current status and plans

Ethical Infrastructure and Successful Handling of Workplace Bullying

Directory of Open Access Journals (Sweden)

Kari Einarsen

2017-03-01

Full Text Available Antecedents and consequences of workplace bullying are well documented. However, the mea- sures taken against workplace bullying, and the effectiveness of such measures, have received less attention. This study addresses this knowledge gap by exploring the role of ethical infrastructure in perceived successful handling of reported workplace bullying. Ethical infrastructure refers to formal and informal systems that enable ethical behavior and disable unethical behavior in organizations. A survey was sent to HR managers and elected head safety representatives (HSRs in all Norwegian municipality organizations. Overall, 216 organizations responded (response rate = 50.2 percent. The ethical infrastructure accounted for 39.4% of the variance in perceived suc- cessful handling of workplace bullying. Formal sanctions were the only unique and signi cant contributor to the perceived successful handling of workplace bullying. The results substantiate the argument that organizations’ ethical infrastructure relate to the HR managers and HSRs’ percep- tions regarding their organizations’ handling of workplace bullying.

Drug-related problems and pharmacy interventions in community practice

DEFF Research Database (Denmark)

Westerlund, Tommy; Almarsdóttir, Anna Birna; Melander, Arne

1999-01-01

Objectives. (1) To document types and number of drug-related problems identified by community pharmacy personnel in Sweden; (2) to determine relationships among the types and number of problems identified and the gender, age and number of prescribed drugs in patients; and (3) to document the inte......Objectives. (1) To document types and number of drug-related problems identified by community pharmacy personnel in Sweden; (2) to determine relationships among the types and number of problems identified and the gender, age and number of prescribed drugs in patients; and (3) to document...... the interventions made by pharmacy personnel with patients and prescribers. Method. Random samples of pharmacists, prescriptionists and pharmacy technicians were drawn nationwide in Sweden; 144 (63 per cent) of the employees fulfilling the inclusion criteria agreed to take part. The participants documented drug......-related problems, interventions and patient variables on a data collection form, and tallied the number of patients they served on another form. Setting. One hundred and sixteen community pharmacies and 12 outpatient hospital pharmacies. Key findings. One problem or more was identified among 2.5 per cent...

Assessment of computer-related health problems among post-graduate nursing students.

Science.gov (United States)

Khan, Shaheen Akhtar; Sharma, Veena

2013-01-01

The study was conducted to assess computer-related health problems among post-graduate nursing students and to develop a Self Instructional Module for prevention of computer-related health problems in a selected university situated in Delhi. A descriptive survey with co-relational design was adopted. A total of 97 samples were selected from different faculties of Jamia Hamdard by multi stage sampling with systematic random sampling technique. Among post-graduate students, majority of sample subjects had average compliance with computer-related ergonomics principles. As regards computer related health problems, majority of post graduate students had moderate computer-related health problems, Self Instructional Module developed for prevention of computer-related health problems was found to be acceptable by the post-graduate students.

Dealing with sickness certification – a survey of problems and strategies among general practitioners and orthopaedic surgeons

Directory of Open Access Journals (Sweden)

Nilsson Gunnar

2007-10-01

Full Text Available Abstract Background In order to get sickness benefit a sick-listed person need a medical certificate issued by a physician; in Sweden after one week of self-certification. Physicians experience sick-listing tasks as problematic and conflicts may arise when patients regard themselves unable to work due to complaints that are hard to objectively verify for the physician. Most GPs and orthopaedic surgeons (OS deal regularly with sick-listing issues in their daily practice. The aim of this study was to explore perceived problems and coping strategies related to tasks of sickness certification among general practitioners (GP and orthopaedic surgeons (OS. Methods A cross-sectional study about sickness certification in two Swedish counties, with 673 participating GPs and 149 OSs, who answered a comprehensive questionnaire. Frequencies together with crude and adjusted (gender and working years Odds ratios were calculated. Results A majority of the GPs and OSs experienced problems in sickness certification every week. To assess the patient's work ability, to handle situations when they and the patient had different opinions about the need for sickness absence, and to issue prolongation certificates when the previous was issued by another physician were reported as problematic by a majority in both groups. Both GPs and OSs prolonged sickness certifications due to waiting times in health care or at Social Insurance Office (SIO. To handle experienced problems they used different strategies; OSs issued sickness certificates without personal appointment more often than the GPs, who on the other hand reported having contact with SIO more often than the OSs. A higher rate of GPs experienced support from management and had a common strategy for handling sickness certification at the clinic than the OSs. Conclusion Most GPs and OSs handled sickness certification weekly and reported a variety of problems in relation to this task, generally GPs to a higher extent

Process & Quality procedures for transport & handling activities

CERN Document Server

Böttcher, O

2002-01-01

To respect the detailed and complex planning of the LHC installation project it is essential to reduce possible faults in every technical service that can cause delays in the schedule. In order to ensure proper execution of transport and handling activities it is important to get detailed information from the clients as early as possible in order to do the planning and the organisation of the required resources. One procedure that requires greater focus in the future is the preparation of the resources. The goal is to prevent equipment breakdowns and accidents while executing transport and handling activities. In the LEP dismantling project multiple breakdowns of important cranes caused serious problems in the project schedule. For the LHC installation project similar incidents in the reliability of the equipment cannot be accepted because of the high sensitivity of the whole schedule. This paper shall outline the efforts and methods that are put in place in order to meet the LHC installation requirements.

Artificial intelligence and design: Opportunities, research problems and directions

Science.gov (United States)

Amarel, Saul

1990-01-01

The issues of industrial productivity and economic competitiveness are of major significance in the U.S. at present. By advancing the science of design, and by creating a broad computer-based methodology for automating the design of artifacts and of industrial processes, we can attain dramatic improvements in productivity. It is our thesis that developments in computer science, especially in Artificial Intelligence (AI) and in related areas of advanced computing, provide us with a unique opportunity to push beyond the present level of computer aided automation technology and to attain substantial advances in the understanding and mechanization of design processes. To attain these goals, we need to build on top of the present state of AI, and to accelerate research and development in areas that are especially relevant to design problems of realistic complexity. We propose an approach to the special challenges in this area, which combines 'core work' in AI with the development of systems for handling significant design tasks. We discuss the general nature of design problems, the scientific issues involved in studying them with the help of AI approaches, and the methodological/technical issues that one must face in developing AI systems for handling advanced design tasks. Looking at basic work in AI from the perspective of design automation, we identify a number of research problems that need special attention. These include finding solution methods for handling multiple interacting goals, formation problems, problem decompositions, and redesign problems; choosing representations for design problems with emphasis on the concept of a design record; and developing approaches for the acquisition and structuring of domain knowledge with emphasis on finding useful approximations to domain theories. Progress in handling these research problems will have major impact both on our understanding of design processes and their automation, and also on several fundamental questions

On the Relationships between (Relatively) Advanced Mathematical Knowledge and (Relatively) Advanced Problem-Solving Behaviours

Science.gov (United States)

Koichu, Boris

2010-01-01

This article discusses an issue of inserting mathematical knowledge within the problem-solving processes. Relatively advanced mathematical knowledge is defined in terms of "three mathematical worlds"; relatively advanced problem-solving behaviours are defined in terms of taxonomies of "proof schemes" and "heuristic behaviours". The relationships…

Full scale tests on remote handled FFTF fuel assembly waste handling and packaging

International Nuclear Information System (INIS)

Allen, C.R.; Cash, R.J.; Dawson, S.A.; Strode, J.N.

1986-01-01

Handling and packaging of remote handled, high activity solid waste fuel assembly hardware components from spent FFTF reactor fuel assemblies have been evaluated using full scale components. The demonstration was performed using FFTF fuel assembly components and simulated components which were handled remotely using electromechanical manipulators, shielding walls, master slave manipulators, specially designed grapples, and remote TV viewing. The testing and evaluation included handling, packaging for current and conceptual shipping containers, and the effects of volume reduction on packing efficiency and shielding requirements. Effects of waste segregation into transuranic (TRU) and non-transuranic fractions also are discussed

Alcohol-Related Problems And High Risk Sexual Behaviour In ...

African Journals Online (AJOL)

There was a significant association between alcohol-related problems and risky sexual behavior. Alcohol-related problems are fairly common in people already infected with HIV/AIDS and are associated with high-risk sexual behavior. Thus, screening and treatment should be part of an effective HIV intervention program.

An Empirical Analysis of Stakeholders' Influence on Policy Development: the Role of Uncertainty Handling

Directory of Open Access Journals (Sweden)

Rianne M. Bijlsma

2011-03-01

Full Text Available Stakeholder participation is advocated widely, but there is little structured, empirical research into its influence on policy development. We aim to further the insight into the characteristics of participatory policy development by comparing it to expert-based policy development for the same case. We describe the process of problem framing and analysis, as well as the knowledge base used. We apply an uncertainty perspective to reveal differences between the approaches and speculate about possible explanations. We view policy development as a continuous handling of substantive uncertainty and process uncertainty, and investigate how the methods of handling uncertainty of actors influence the policy development. Our findings suggest that the wider frame that was adopted in the participatory approach was the result of a more active handling of process uncertainty. The stakeholders handled institutional uncertainty by broadening the problem frame, and they handled strategic uncertainty by negotiating commitment and by including all important stakeholder criteria in the frame. In the expert-based approach, we observed a more passive handling of uncertainty, apparently to avoid complexity. The experts handled institutional uncertainty by reducing the scope and by anticipating windows of opportunity in other policy arenas. Strategic uncertainty was handled by assuming stakeholders' acceptance of noncontroversial measures that balanced benefits and sacrifices. Three other observations are of interest to the scientific debate on participatory policy processes. Firstly, the participatory policy was less adaptive than the expert-based policy. The observed low tolerance for process uncertainty of participants made them opt for a rigorous "once and for all" settling of the conflict. Secondly, in the participatory approach, actors preferred procedures of traceable knowledge acquisition over controversial topics to handle substantive uncertainty. This

Studies and research concerning BNFP: cask handling equipment standardization

International Nuclear Information System (INIS)

McCreery, P.N.

1980-10-01

This report covers the activities of one of the sub-tasks within the Spent LWR Fuel Transportation Receiving, Handling, and Storage program. The sub-task is identified as Cask Handling Equipment Standardization. The objective of the sub-task specifies: investigate and identify opportunities for standardization of cask interface equipment. This study will examine the potential benefits of standardized yokes, decontamination barriers and special tools, and, to the extent feasible, standardized methods and software for handling the variety of casks presently available in the US fleet. The result of the investigations is a compilation of reports that are related by their common goal of reducing cask turnaround time

Nintendo related injuries and other problems: review.

Science.gov (United States)

Jalink, Maarten B; Heineman, Erik; Pierie, Jean-Pierre E N; ten Cate Hoedemaker, Henk O

2014-12-16

To identify all reported cases of injury and other problems caused by using a Nintendo video gaming system. Review. Search of PubMed and Embase in June 2014 for reports on injuries and other problems caused by using a Nintendo gaming system. Most of the 38 articles identified were case reports or case series. Injuries and problems ranged from neurological and psychological to surgical. Traditional controllers with buttons were associated with tendinitis of the extensor of the thumb. The joystick on the Nintendo 64 controller was linked to palmar ulceration. The motion sensitive Wii remote was associated with musculoskeletal problems and various traumas. Most problems are mild and prevalence is low. The described injuries were related to the way the games are controlled, which varies according to the video game console. © Jalink et al 2014.

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Uranium hexafluoride handling. Proceedings

Energy Technology Data Exchange (ETDEWEB)

1991-12-31

The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.

The Department of Energy's Rocky Flats Plant: A guide to record series useful for health related research. Volume 4: Production and materials handling

International Nuclear Information System (INIS)

1995-01-01

This is the fourth in a series of seven volumes which constitute a guide to records of the Rocky Flats Plant useful for conducting health-related research. The primary purpose of Volume 4 is to describe record series pertaining to production and materials handling activities at the Department of Energy's (DOE) Rocky Flats Plant, now named the Rocky Flats Environmental Technology Site, near Denver, Colorado. History Associates Incorporated (HAI) prepared this guide as part of its work as the support services contractor for DOE's Epidemiologic Records Inventory Project. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI's role in the project, provides a history of production and materials handling practices at Rocky Flats, and identifies organizations contributing to production and materials handling policies and activities. Other topics include the scope and arrangement of the guide and the organization to contact for access to these records

Pacific Northwest Laboratory (PNL) spent fuel transportation and handling facility models

Energy Technology Data Exchange (ETDEWEB)

Andrews, W.B.; Bower, J.C.; Burnett, R.A.; Engel, R.L.; Rolland, C.W.

1979-09-01

A spent fuel logistics study was conducted in support of the US DOE program to develop facilities for preparing spent unreprocessed fuel from commercial LWRs for geological storage. Two computerized logistics models were developed. The first one was the site evaluation model. Two studies of spent fuel handling facility and spent fuel disposal facility siting were completed; the first postulates a single spent fuel handling facility located at any of six DOE laboratory sites, while the second study examined siting strategies with the spent fuel repository relative to the spent fuel handling facility. A second model to conduct storage/handling facility simulations was developed. (DLC)

Pacific Northwest Laboratory (PNL) spent fuel transportation and handling facility models

International Nuclear Information System (INIS)

Andrews, W.B.; Bower, J.C.; Burnett, R.A.; Engel, R.L.; Rolland, C.W.

1979-09-01

A spent fuel logistics study was conducted in support of the US DOE program to develop facilities for preparing spent unreprocessed fuel from commercial LWRs for geological storage. Two computerized logistics models were developed. The first one was the site evaluation model. Two studies of spent fuel handling facility and spent fuel disposal facility siting were completed; the first postulates a single spent fuel handling facility located at any of six DOE laboratory sites, while the second study examined siting strategies with the spent fuel repository relative to the spent fuel handling facility. A second model to conduct storage/handling facility simulations was developed

20 CFR 658.401 - Types of complaints handled by the JS complaint system.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Types of complaints handled by the JS... § 658.401 Types of complaints handled by the JS complaint system. (a)(1) The types of complaints (JS related complaints) which shall be handled to resolution by the JS complaint system are as follows: (i...

Ways of solving the problems of radiation safety and environmental protection in handling radioactive waste at atomic power stations in the USSR

International Nuclear Information System (INIS)

Gusev, D.I.; Belitskij, A.S.; Turkin, A.D.; Kozlov, V.M.

1977-01-01

Requirements of the State Sanitary Supervision on radiation safety of the personnel and population and on protection of the environment in handling radioactive wastes from nuclear power stations in the USSR are regulated by the Standards of Radiation Safety, the Main Sanitary Rules for Handling Radioactive Materials and by the Sanitary Rules for Designing Nuclear Power Stations. The regulations contained in these documents are obligatory for all the establishments at the stages of design, building and operation of nuclear power stations. The main requirement for handling radioactive wastes from nuclear power stations in the USSR is to dispose of them near the place of their production. In nuclear power station siting and designing the special territory is provided for liquid and solid radioactive wastes storage taking into account the whole period of nuclear power station operation. These storage sites are located within the controlled area. They are built as required, usually for five years. The report contains hygienic and hydrological requirements to the radiation waste burial sites and data on the accepted system of controlling leak-proof qualities of the disposal cavities and radioactivity of the ground water in this region. The results of long-term studies on radionuclide leaching from the bituminic blocks are given and it is shown that the bituminizing method used for solidification of intermediate activity wastes is very promising. In the USSR much attention is given to the problem of sanitary protection of the cooling ponds at nuclear power stations. No limits to the national-economic use of these ponds outside the nuclear power station site are established. Therefore in determining the requirements to the discharge of effluents into the cooling ponds of nuclear power stations the possibility of radionuclide transfer to the population through the aquaeous and terrestrial biological chains is taken into account. The possibility of human diet contamination

Guidance Counsellor Strategies for Handling Bullying

Science.gov (United States)

Power-Elliott, Michleen; Harris, Gregory E.

2012-01-01

The purpose of this exploratory-descriptive study was to examine how guidance counsellors in the province of Newfoundland and Labrador would handle a specific verbal-relational bullying incident. Also of interest was guidance counsellor involvement and training in bullying programmes and Positive Behaviour Supports. Data for this study was…

The problem of non-discrimination in labor relations

OpenAIRE

Вишновецька, Світлана Василівна; Національний авіаційний університет; Пінчук, Ольга Борисівна; Національний авіаційний університет

2015-01-01

The problem of discrimination on the grounds of gender and age in the field of labor relations are investigated in the article. International and Ukrainian legal regulation of non-discrimination as a guarantee of the right to work was analyzed; solutions to the problem are proposed in the article. The different points of view on the concept of discrimination in labor relations were studied by the authors. It was founded that discrimination by age and gender are the most extended forms of disc...

Technical on the TAB of air handling system in IMEF facility

International Nuclear Information System (INIS)

Oh, Yon Woo; Baik, S. Y.; Kim, S. D.; Lee, B. J.

2002-08-01

A T.A.B(Testing, Adjusting and Balancing) technique, the basic technique of air handling facility, is one of the essential technical items which workers in charge of operation of facilities have to acquire. Especially, through scientific and reasonable inspective procedures, the reduction of energy and guarantee of designed skill have become influential important problems in our time rather than in the past days. Entrepreneurs have required more thorough verify of performances and procedure of test in order to raise the investment efficiency and reduce expenditure. For that reason, I hope that cooperator acquire objective and substantial knowledges about air handling facility so that they are helped from them

Age-related differences in strategic monitoring during arithmetic problem solving.

Science.gov (United States)

Geurten, Marie; Lemaire, Patrick

2017-10-01

We examined the role of metacognitive monitoring in strategic behavior during arithmetic problem solving, a process that is expected to shed light on age-related differences in strategy selection. Young and older adults accomplished better strategy-judgment, better strategy-selection, and strategy-execution tasks. Data showed that participants made better strategy judgments when problems were problems with homogeneous unit digits (i.e., problems with both unit digits smaller or larger than 5; 31×62) relative to problems with heterogeneous unit digits (i.e., problems with one unit digit smaller or larger than 5; 31×67) and when the better strategy was cued on rounding-up problems (e.g., 68×23) compared to rounding-down problems (e.g., 36×53). Results also indicated higher rates of better strategy judgment in young than in older adults. These aging effects differed across problem types. Older adults made more accurate judgments on rounding-up problems than on rounding-down problems when the cued strategy was rounding-up, while young adults did not show such problem-related differences. Moreover, strategy selection correlated with strategy judgment, and even more so in older adults than in young adults. To discuss the implications of these findings, we propose a theoretical framework of how strategy judgments occur in young and older adults and discuss how this framework enables to understand relationships between metacognitive monitoring and strategic behaviors when participants solve arithmetic problems. Copyright © 2017 Elsevier B.V. All rights reserved.

ERROR HANDLING IN INTEGRATION WORKFLOWS

Directory of Open Access Journals (Sweden)

Alexey M. Nazarenko

2017-01-01

Full Text Available Simulation experiments performed while solving multidisciplinary engineering and scientific problems require joint usage of multiple software tools. Further, when following a preset plan of experiment or searching for optimum solu- tions, the same sequence of calculations is run multiple times with various simulation parameters, input data, or conditions while overall workflow does not change. Automation of simulations like these requires implementing of a workflow where tool execution and data exchange is usually controlled by a special type of software, an integration environment or plat- form. The result is an integration workflow (a platform-dependent implementation of some computing workflow which, in the context of automation, is a composition of weakly coupled (in terms of communication intensity typical subtasks. These compositions can then be decomposed back into a few workflow patterns (types of subtasks interaction. The pat- terns, in their turn, can be interpreted as higher level subtasks.This paper considers execution control and data exchange rules that should be imposed by the integration envi- ronment in the case of an error encountered by some integrated software tool. An error is defined as any abnormal behavior of a tool that invalidates its result data thus disrupting the data flow within the integration workflow. The main requirementto the error handling mechanism implemented by the integration environment is to prevent abnormal termination of theentire workflow in case of missing intermediate results data. Error handling rules are formulated on the basic pattern level and on the level of a composite task that can combine several basic patterns as next level subtasks. The cases where workflow behavior may be different, depending on user's purposes, when an error takes place, and possible error handling op- tions that can be specified by the user are also noted in the work.

Sleep-related problems in common medical conditions.

Science.gov (United States)

Parish, James M

2009-02-01

Common medical problems are often associated with abnormalities of sleep. Patients with chronic medical disorders often have fewer hours of sleep and less restorative sleep compared to healthy individuals, and this poor sleep may worsen the subjective symptoms of the disorder. Individuals with lung disease often have disturbed sleep related to oxygen desaturations, coughing, or dyspnea. Both obstructive lung disease and restrictive lung diseases are associated with poor quality sleep. Awakenings from sleep are common in untreated or undertreated asthma, and cause sleep disruption. Gastroesophageal reflux is a major cause of disrupted sleep due to awakenings from heartburn, dyspepsia, acid brash, coughing, or choking. Patients with chronic renal disease commonly have sleep complaints often due to insomnia, insufficient sleep, sleep apnea, or restless legs syndrome. Complaints related to sleep are very common in patients with fibromyalgia and other causes of chronic pain. Sleep disruption increases the sensation of pain and decreases quality of life. Patients with infectious diseases, including acute viral illnesses, HIV-related disease, and Lyme disease, may have significant problems with insomnia and hypersomnolence. Women with menopause have from insomnia, sleep-disordered breathing, restless legs syndrome, or fibromyalgia. Patients with cancer or receiving cancer therapy are often bothered by insomnia or other sleep disturbances that affect quality of life and daytime energy. The objective of this article is to review frequently encountered medical conditions and examine their impact on sleep, and to review frequent sleep-related problems associated with these common medical conditions.

New transport and handling contract

CERN Multimedia

SC Department

2008-01-01

A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319

Some human-related problems in radiation protection

International Nuclear Information System (INIS)

Yoshizawa, Yasuo

1980-01-01

Radiation protection includes both human and source-related problems. The human problems have not only medical but also social aspects, such as labor management. Special attention should be paid to the fact that the subject of radiation protection is not a human being as living thing but as member of society. ICRP recommended that conditions of work can be divided into two classed, working condition A and B, according to annual exposure. This application is of great value to radiation protection practice. Nevertheless the legal regulations do not adopt it yet. The present condition of the medical surveillance of radiation workers is not appropriate from the scientific standpoint. This is the difficult problem which is caused by the delay of the legal application of ICRP recommendation. Compensation for occupational radiation hazards should be overlooked. This problem have been investigated by an authorized committee, but a number of unsolved problems still remain. (author)

Confluence Modulo Equivalence in Constraint Handling Rules

DEFF Research Database (Denmark)

Christiansen, Henning; Kirkeby, Maja Hanne

2015-01-01

Previous results on confluence for Constraint Handling Rules, CHR, are generalized to take into account user-defined state equivalence relations. This allows a much larger class of programs to enjoy the advantages of confluence, which include various optimization techniques and simplified...

Mockup of an automated material transport system for remote handling

International Nuclear Information System (INIS)

Porter, M.L.

1992-01-01

An Automated Material Transport System (AMTS) was identified for transport of samples within a Material and Process Control Laboratory (MPCL). The MPCL was designed with a dry sample handling laboratory and a wet chemistry analysis laboratory. Each laboratory contained several processing gloveboxes. The function of the AMTS was to automate the handling of materials, multiple process samples, and bulky items between process stations with a minimum of operator intervention and with minimum o[ waiting periods and nonproductive activities. This paper discusses the system design features, capabilities and results of initial testing. The overall performance of the AMTS is very good. No major problems or concerns were identified. System commands are simple and logical making the system user friendly. Operating principle and design of individual components is simple. With the addition of various track modules, the system can be configured in most any configuration. The AMTS lends itself very well for integration with other automated systems or products. The AMTS is suited for applications involving light payloads which require multiple sample and material handling, lot tracking, and system integration with other products

The claims handling process of engineering insurance in South Africa

Directory of Open Access Journals (Sweden)

I.C. de Beer

2015-05-01

Full Text Available Due to technological developments, the complicated world of engineering and its associated products are continuously becoming more specialized. Short-term insurers provide engineering insurance to enable the owners and operators of engineering assets to combat the negative impact of the associated risks. It is, however, a huge challenge to the insurers of engineering insurance to manage the particular risks against the background of technological enhancement. The skills gap in the short-term insurance market and the engineering environment may be the main factor which inhibits the growth of the engineering insurance market. The objective of this research embodies the improvement of financial decision-making concerning the claims handling process of engineering insurance. Secondary as well as primary data were necessary to achieve the stated objective. The secondary data provided the background of the research and enabled the researchers to compile a questionnaire for the empirical survey. The questionnaire and a cover letter were sent to the top 10 short-term insurers in South Africa that are providing engineering insurance. Their perceptions should provide guidelines to other short-term insurers who are engaged in engineering insurance, as they are regarded as the market leaders of engineering insurance in South Africa. The empirical results of this research focus on the importance of various claims handling factors when assessing the claims handling process of engineering insurance, the problem areas in the claims handling process concerned, as well as how often the stipulations of engineering insurance policies are adjusted to take the claims handling factors into account.

Medication-handling challenges among visually impaired population

Directory of Open Access Journals (Sweden)

Ling Zhi-Han

2017-01-01

Full Text Available Objective: Visually impaired individuals are particularly at higher risk for experiencing a medication error. The aim of this study is to identify the problems encountered by the visually impaired population when handling their medication. Methods: A cross-sectional survey was conducted using an interviewer-guided questionnaire with 100 visually impaired individuals. The questionnaire comprised a series of questions in medication management. Results: All of the respondents perceived that self-administration of medication was a challenging task. A total of 89% of respondents were unable to read the prescription labels, 75% of respondents did not know the expiry date of their own medication, and 58% of respondents did not know the name of the medication. With regard to storage of medication, 72% of respondents did not practice appropriate methods to store their medication, and 80% of respondents kept the unused medication. All of the respondents disposed leftover medication through household rubbish. A total of 64% of respondents never practice medication review. Most (96% of them did not tell health-care providers when they faced difficulties in handling their medication. Conclusion: Most of the visually impaired individuals did not receive appropriate assistance regarding medicine use and having low awareness in medication management. This can lead to increased risk of medication errors or mismanagement among visually impaired population. Hence, effective strategies, especially in pharmaceutical care services, should be structured to assist this special population in medication handling.

Design guides for radioactive-material-handling facilities and equipment

International Nuclear Information System (INIS)

Doman, D.R.; Barker, R.E.

1980-01-01

Fourteen key areas relating to facilities and equipment for handling radioactive materials involved in examination, reprocessing, fusion fuel handling and remote maintenance have been defined and writing groups established to prepare design guides for each areas. The guides will give guidance applicable to design, construction, operation, maintenance and safety, together with examples and checklists. Each guide will be reviewed by an independent review group. The guides are expected to be compiled and published as a single document

Confluence Modulo Equivalence in Constraint Handling Rules

DEFF Research Database (Denmark)

Christiansen, Henning; Kirkeby, Maja Hanne

2014-01-01

Previous results on confluence for Constraint Handling Rules, CHR, are generalized to take into account user-defined state equivalence relations. This allows a much larger class of programs to enjoy the ad- vantages of confluence, which include various optimization techniques and simplified...

Shift work-related health problems in

Directory of Open Access Journals (Sweden)

S. Khavaji

2010-04-01

Full Text Available Background and aimsShift work is a major feature of working life that affects diverse aspects of human life. The main purposes of this study were to investigate shift work-related health problems and their risk factors among workers of "12-hour shift" schedule.MethodsThis cross-sectional study was carried out at 8 petrochemical industries in Asalooyeh area. Study population consisted of 1203 workers including 549 shift worker (46% and 654 day worker (54%. Data on personal details, shift schedule and adverse effects of shift work werecollected by anonymous questionnaire. Statistical analyses were performed using SPSS, version 11.5. The level of significance was set at 5%.ResultsAlthough, the results showed that health problems among shift workers was more prevalent than day workers, but the differences were just significant in gastrointestinal and musculoskeletal disorders (p<0.05. Multiple linear regressions indicated that in addition to shift working, other variants such as long work hours, type of employment, second job, number of children and job title were associated with health problems.ConclusionPrevalence rates of gastrointestinal and musculoskeletal problems among shift workers were significantly higher than that of day workers. Although, working in shift system was the main significant factor associated with the reported problems, but other demographic andwork variables were also found to have association.

Design and Implementation of Company Tailored Automated Material Handling

DEFF Research Database (Denmark)

Langer, Gilad; Bilberg, Arne

1996-01-01

This article focuses on the problems of analysing automation of material handling systems in order to develop an efficient automated solution that is specifically tailored to the company. The research has resulted in development of new methods for evaluating factory automation from design...... to implementation. The goals of the research were to analyse and evaluate automation in order to obtain an advantageous combination of human and automated resources. The idea is to asses different solutions in a virtual environment, where experiments and analyses can be performed so that the company can justify...... for their application with computer aided information processing tools. The framework is named the "Automated Material Handling (AMH) Preference GuideLine". The research has been carried out in close co-operation with Danish and European industry, where implementations of automation can be referred to. It is our...

Habituating to handling: factors affecting preorbital gland opening in red deer calves.

Science.gov (United States)

Ceacero, F; Landete-Castillejos, T; Bartošová, J; García, A J; Bartoš, L; Komárková, M; Gallego, L

2014-09-01

The preorbital gland plays not only an olfactory role in cervids but also a visual one. Opening this gland is an easy way for the calf to communicate with the mother, indicating hunger/satiety, stress, pain, fear, or excitement. This information can be also useful for farm operators to assess how fast the calves habituate to handling routines and to detect those calves that do not habituate and may suffer chronic stress in the future. Thirty-one calves were subjected to 2 consecutive experiments to clarify if observing preorbital gland opening is related to habituation to handling in red deer calves (Cervus elaphus). Calves were born in 3 different paddocks, handled as newborns (Exp. 1), and then subjected to the same routine handling but with different periodicity: every 1, 2, or 3 wk (Exp. 2). In Exp. 1, preorbital gland opening was recorded in newborns during an initial handling (including weighing, ear tagging, and sex determination). Preorbital gland opening occurred in 93% of calves during this procedure and was not affected by sex, time since birth, or birth weight. Experiment 2 consisted of measuring preorbital opening during the same routine handling (weighing, blood sampling, and rump touching to assess body condition) when calves were 1, 3, and 5 mo old. Binary logistic regression showed that gland opening was associated with habituation to handling, since at 1 and 3 mo the probability of opening the gland decreased with the number of handlings that a calf experienced before (P = 0.008 and P = 0.028, respectively). However, there were no further changes in preorbital gland opening rate in the 5-mo-old calves (P = 0.182). The significant influence of the number of previous handlings on the probability of opening the preorbital gland was confirmed through generalized linear model with repeated measures (P = 0.007). Preorbital gland opening decreased along the phases of the study. Nevertheless, we found a significant trend in individuals to keep similar

The main ecological principles of ensuring safety of man and biosphere in the handling of radioactive wastes

International Nuclear Information System (INIS)

Kryshev, I.I.; Sazykina, T.G.

1999-01-01

This paper provides an assessment of ecological safety in the handling of radioactive wastes in the territory of Russia. The following problems are considered: the main sources of radioactive wastes and spent nuclear fuel; assessments of collective dose from the enterprises of the nuclear fuel cycle in Russia; and principles and criteria for ensuring ecological safety when handling radioactive wastes

Fort St. Vrain fuel-handling system RAM analysis

International Nuclear Information System (INIS)

Azizi, S.M.; Berg, G.E.; Burton, J.H.; Durand, R.E.; Larson, E.M.; Pepe, D.J.; Rutherford, P.D.; Novachek, F.J.

1989-01-01

Public Service of Company of Colorado (PSC) is planning to decommission its Fort St. Vrain plant in 1990. This requires removal of 1,500 separate assemblies from the core. With the low historical availability of the fuel-handling system (FHS), defueling time was estimated at 36 months. With plant expenses of approximately $1.6 million per month during defueling, this would mean a schedule cost of $58 million. With their contractor, Rockwell International, PSC embarked on a reliability, availability, and maintainability (RAM) analysis to reduce projected defueling time. Key elements included (a) estimating availability of the FHS using a limited historical record, (b) assessing the defueling critical path, and (c) proposing and evaluating design/operational improvements. The most cost-effective improvements are being implemented and are expected to provide a reduction of >18 months in schedule and a net savings of $20 to 25 million. The paper describes the FHS design and operation, major problems associated with fuel-handling operations, and results and recommendations

Anxiety and health problems related to air travel.

Science.gov (United States)

McIntosh, I B; Swanson, V; Power, K G; Raeside, F; Dempster, C

1998-12-01

A significant proportion of air travelers experience situational anxiety and physical health problems. Take-off and landing are assumed to be stressful, but anxiety related to other aspects of the air travel process, anxiety coping strategies, and in-flight health problems have not previously been investigated. We aimed to investigate frequency of perceived anxiety at procedural stages of air travel, individual strategies used to reduce such anxiety, and frequency of health problems on short-haul and long-haul flights. A questionnaire measuring the occurrence and frequency of the above was administered to two samples of intending travelers during a 3 month period to: (a) 138 travel agency clients, and (b) 100 individuals attending a hospital travel clinic. Of the 238 respondents, two thirds were women. Take-off and landing were a perceived source of anxiety for about 40% of respondents, flight delays for over 50%, and customs and baggage reclaim for a third of individuals. Most frequent anxiety-reduction methods included alcohol and cigarette use, and distraction or relaxation techniques. Physical health problems related to air travel were common, and there was a strong relationship between such problems and frequency of anxiety. Travel agency clients reported more anxiety but not more physical health symptoms overall than travel clinic clients. Women reported greater air-travel anxiety, and more somatic symptoms than men. Significant numbers of air travelers report perceived anxiety related to aspects of travel, and this is associated with health problems during flights. Airlines and travel companies could institute specific measures, including improved information and communication, to reassure clients and thereby diminish anxiety during stages of air-travel. Medical practitioners and travel agencies should also be aware of the potential stresses of air travel and the need for additional information and advice.

Remote handling machines

International Nuclear Information System (INIS)

Sato, Shinri

1985-01-01

In nuclear power facilities, the management of radioactive wastes is made with its technology plus the automatic techniques. Under the radiation field, the maintenance or aid of such systems is important. To cope with this situation, MF-2 system, MF-3 system and a manipulator system as remote handling machines are described. MF-2 system consists of an MF-2 carrier truck, a control unit and a command trailer. It is capable of handling heavy-weight objects. The system is not by hydraulic but by electrical means. MF-3 system consists of a four-crawler truck and a manipulator. The truck is versatile in its posture by means of the four independent crawlers. The manipulator system is bilateral in operation, so that the delicate handling is made possible. (Mori, K.)

Consumer evaluation of complaint handling in the Dutch health insurance market.

Science.gov (United States)

Wendel, Sonja; de Jong, Judith D; Curfs, Emile C

2011-11-15

How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and

Consumer evaluation of complaint handling in the Dutch health insurance market

Directory of Open Access Journals (Sweden)

Wendel Sonja

2011-11-01

Full Text Available Abstract Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and

Consumer evaluation of complaint handling in the Dutch health insurance market

Science.gov (United States)

2011-01-01

Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not

SaaS Platform for Time Series Data Handling

Science.gov (United States)

Oplachko, Ekaterina; Rykunov, Stanislav; Ustinin, Mikhail

2018-02-01

The paper is devoted to the description of MathBrain, a cloud-based resource, which works as a "Software as a Service" model. It is designed to maximize the efficiency of the current technology and to provide a tool for time series data handling. The resource provides access to the following analysis methods: direct and inverse Fourier transforms, Principal component analysis and Independent component analysis decompositions, quantitative analysis, magnetoencephalography inverse problem solution in a single dipole model based on multichannel spectral data.

The relationships between problem characteristics, achievement-related behaviors, and academic achievement in problem-based learning

NARCIS (Netherlands)

N. Sockalingam (Nachamma); J.I. Rotgans (Jerome); H.G. Schmidt (Henk)

2011-01-01

textabstractThis study investigated the influence of five problem characteristics on students' achievement-related classroom behaviors and academic achievement. Data from 5,949 polytechnic students in PBL curricula across 170 courses were analyzed by means of path analysis. The five problem

7 CFR 1900.156 - Special handling-processing.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Special handling-processing. 1900.156 Section 1900... BUSINESS-COOPERATIVE SERVICE, RURAL UTILITIES SERVICE, AND FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE... Assistance to Employees, Relatives, and Associates § 1900.156 Special handling—processing. (a) [Reserved] (b...

Health Education in Practice: Employee Conflict Resolution Knowledge and Conflict Handling Strategies

Science.gov (United States)

Hackett, Alexis; Renschler, Lauren; Kramer, Alaina

2014-01-01

The purpose of this project was to determine if a brief workplace conflict resolution workshop improved employee conflict resolution knowledge and to examine which conflict handling strategies (Yielding, Compromising, Forcing, Problem-Solving, Avoiding) were most used by employees when dealing with workplace conflict. A pre-test/post-test control…

Technical specifications of air handling system of the inspection of a field

International Nuclear Information System (INIS)

Kim, Seon Duk; Bang, Hong Sik; Oh, Yon Woo

2002-07-01

A T.A.B(Testing, Adjusting and Balancing) technique, the basic technique of air handling facility, is one of the essential technical items which workers in charge of operation of facilities have to acquire. Especially, through scientific and reasonable inspective procedures, the reduction of energy and guarantee of designed skill have become influential important problems in our time rather than in the past days. Entrepreneurs have required more thorough verify of performances and procedure of test in order to raise the investment efficiency and reduce expenditure. For that reason, I hope that co-operator acquire objective and substantial knowledges about air handling facility so that they are helped from them

Secondary Teachers’ Mathematics-related Beliefs and Knowledge about Mathematical Problem-solving

Science.gov (United States)

E Siswono, T. Y.; Kohar, A. W.; Hartono, S.

2017-02-01

This study investigates secondary teachers’ belief about the three mathematics-related beliefs, i.e. nature of mathematics, teaching mathematics, learning mathematics, and knowledge about mathematical problem solving. Data were gathered through a set of task-based semi-structured interviews of three selected teachers with different philosophical views of teaching mathematics, i.e. instrumental, platonist, and problem solving. Those teachers were selected from an interview using a belief-related task from purposively selected teachers in Surabaya and Sidoarjo. While the interviews about knowledge examine teachers’ problem solving content and pedagogical knowledge, the interviews about beliefs examine their views on several cases extracted from each of such mathematics-related beliefs. Analysis included the categorization and comparison on each of beliefs and knowledge as well as their interaction. Results indicate that all the teachers did not show a high consistency in responding views of their mathematics-related beliefs, while they showed weaknesses primarily on problem solving content knowledge. Findings also point out that teachers’ beliefs have a strong relationship with teachers’ knowledge about problem solving. In particular, the instrumental teacher’s beliefs were consistent with his insufficient knowledge about problem-solving, while both platonist and problem-solving teacher’s beliefs were consistent with their sufficient knowledge of either content or pedagogical problem solving.

Invention activities as preparation for learning laboratory data handling skills

Science.gov (United States)

Day, James

2012-10-01

Undergraduate physics laboratories are often driven by a mix of goals, and usually enough of them to cause cognitive overload for the student. Our recent findings align well with studies indicating that students often exit a physics lab without having properly learned how to handle real data. The value of having students explore the underlying structure of a problem before being able to solve it has been shown as an effective way to ready students for learning. Borrowing on findings from the fields of education and cognitive psychology, we use ``invention activities'' to precede direct instruction and bolster learning. In this talk I will show some of what we have learned about students' data handling skills, explain how an invention activity works, and share some observations of successful transfer.

Experience of remote under water handling operations at Tarapur Atomic Power Station

International Nuclear Information System (INIS)

Agarwal, S.K.

1990-01-01

Each Refuelling outage of Tarapur Atomic Power Station Reactors involves a great deal of remote underwater handling operations using special remote handling tools, working deep down in the reactor vessel under about sixty feet of water and in the narrow confines of highly radioactive core. The remote underwater handling operations include incore and out of core sipping operations, fuel reloading or shuffling, uncoupling of control rod drives, replacement and shuffling of control blades, replacement of local power range monitors, spent fuel shipment in casks, retrieval of fallen or displaced fuel top guide spacers, orifices and their installation, underwater CCTV inspection of reactor internals, core verification, channelling and dechannelling of fuel bundles, inspection of fuel bundles and channels, unbolting and removal of old racks, installation of high density racks, removal and reinstallation of fuel support plugs and guide tubes, underwater cutting of irradiated hardware material and their disposal, fuel reconstitution, removal and reinstallation of system dryer separator etc.. The paper describes in brief the salient experience of remote underwater handling operations at TAPS especially the unusual problems faced and solved, by using special tools, employing specific techniques and by repeated efforts, patience, ingenuity and skills. (author). 10 figs

Fuel handling and storage systems in nuclear power plants

International Nuclear Information System (INIS)

1984-01-01

The scope of this Guide includes the design of handling and storage facilities for fuel assemblies from the receipt of fuel into the nuclear power plant until the fuel departs from that plant. The unirradiated fuel considered in this Guide is assumed not to exhibit any significant level of radiation so that it can be handled without shielding or cooling. This Guide also gives limited consideration to the handling and storage of certain core components. While the general design and safety principles are discussed in Section 2 of this Guide, more specific design requirements for the handling and storage of fuel are given in detailed sections which follow the general design and safety principles. Further useful information is to be found in the IAEA Technical Reports Series No. 189 ''Storage, Handling and Movement of Fuel and Related Components at Nuclear Power Plants'' and No. 198 ''Guide to the Safe Handling of Radioactive Wastes at Nuclear Power Plants''. However, the scope of the Guide does not include consideration of the following: (1) The various reactor physics questions associated with fuel and absorber loading and unloading into the core; (2) The design aspects of preparation of the reactor for fuel loading (such as the removal of the pressure vessel head for a light water reactor) and restoration after loading; (3) The design of shipping casks; (4) Fuel storage of a long-term nature exceeding the design lifetime of the nuclear power plant; (5) Unirradiated fuel containing plutonium

Predictors of intimate partner problem-related suicides among suicide decedents in Kentucky

Directory of Open Access Journals (Sweden)

Ashley L. Comiford

2016-07-01

Full Text Available BACKGROUND: Suicide is the 10th leading cause of death in the United States. Furthermore, intimate partner problems are amid the top precipitating circumstances among suicide decedents. The aim of this study was to determine circumstantial associations of intimate partner problem-related suicides in suicide decedents in Kentucky. METHODS: All suicides that were reported to the Kentucky Violent Death Reporting System between 2005 and 2012 were eligible for this study. Multiple logistic regression was used to explore predictors (precipitating health-related problems, life stressors, and criminal/legal issues of intimate partner problem-related suicides. RESULTS: Of the 4,754 suicides, included in this study, approximately 17% had intimate partner problems prior to suicide. In the adjusted analysis, mental health issues, alcohol problems, history of suicides attempts, suicides precipitated by another crime, and other legal problems increased the odds of having an intimate partner-related suicide. However, having physical health problems, prior to the suicide, decreased the odds of intimate partner-related suicide. CONCLUSIONS: These results provide insight for the development of suicide interventions for individuals with intimate partner problems by targeting risk factors that are prevalent among this population. Moreover, these results may help marriage/relationship and/or family/divorce court representatives identify individuals with intimate partner problems more at risk for suicide and alleviate the influence these suicide risk factors have on individuals experiencing Intimate partner problems.

Equipment for the handling of thorium materials

International Nuclear Information System (INIS)

Heisler, S.W. Jr.; Mihalovich, G.S.

1988-01-01

The Feed Materials Production Center (FMPC) is the United States Department of Energy's storage facility for thorium. FMPC thorium handling and overpacking projects ensure the continued safe handling and storage of the thorium inventory until final disposition of the materials is determined and implemented. The handling and overpacking of the thorium materials requires the design of a system that utilizes remote handling and overpacking equipment not currently utilized at the FMPC in the handling of uranium materials. The use of remote equipment significantly reduces radiation exposure to personnel during the handling and overpacking efforts. The design system combines existing technologies from the nuclear industry, the materials processing and handling industry and the mining industry. The designed system consists of a modified fork lift truck for the transport of thorium containers, automated equipment for material identification and inventory control, and remote handling and overpacking equipment for material identification and inventory control, and remote handling and overpacking equipment for repackaging of the thorium materials

Event detection and exception handling strategies in the ASDEX Upgrade discharge control system

International Nuclear Information System (INIS)

Treutterer, W.; Neu, G.; Rapson, C.; Raupp, G.; Zasche, D.; Zehetbauer, T.

2013-01-01

Highlights: •Event detection and exception handling is integrated in control system architecture. •Pulse control with local exception handling and pulse supervision with central exception handling are strictly separated. •Local exception handling limits the effect of an exception to a minimal part of the controlled system. •Central Exception Handling solves problems requiring coordinated action of multiple control components. -- Abstract: Thermonuclear plasmas are governed by nonlinear characteristics: plasma operation can be classified into scenarios with pronounced features like L and H-mode, ELMs or MHD activity. Transitions between them may be treated as events. Similarly, technical systems are also subject to events such as failure of measurement sensors, actuator saturation or violation of machine and plant operation limits. Such situations often are handled with a mixture of pulse abortion and iteratively improved pulse schedule reference programming. In case of protection-relevant events, however, the complexity of even a medium-sized device as ASDEX Upgrade requires a sophisticated and coordinated shutdown procedure rather than a simple stop of the pulse. The detection of events and their intelligent handling by the control system has been shown to be valuable also in terms of saving experiment time and cost. This paper outlines how ASDEX Upgrade's discharge control system (DCS) detects events and handles exceptions in two stages: locally and centrally. The goal of local exception handling is to limit the effect of an unexpected or asynchronous event to a minimal part of the controlled system. Thus, local exception handling facilitates robustness to failures but keeps the decision structures lean. A central state machine deals with exceptions requiring coordinated action of multiple control components. DCS implements the state machine by means of pulse schedule segments containing pre-programmed waveforms to define discharge goal and control

Event detection and exception handling strategies in the ASDEX Upgrade discharge control system

Energy Technology Data Exchange (ETDEWEB)

Treutterer, W., E-mail: Wolfgang.Treutterer@ipp.mpg.de; Neu, G.; Rapson, C.; Raupp, G.; Zasche, D.; Zehetbauer, T.

2013-10-15

Highlights: •Event detection and exception handling is integrated in control system architecture. •Pulse control with local exception handling and pulse supervision with central exception handling are strictly separated. •Local exception handling limits the effect of an exception to a minimal part of the controlled system. •Central Exception Handling solves problems requiring coordinated action of multiple control components. -- Abstract: Thermonuclear plasmas are governed by nonlinear characteristics: plasma operation can be classified into scenarios with pronounced features like L and H-mode, ELMs or MHD activity. Transitions between them may be treated as events. Similarly, technical systems are also subject to events such as failure of measurement sensors, actuator saturation or violation of machine and plant operation limits. Such situations often are handled with a mixture of pulse abortion and iteratively improved pulse schedule reference programming. In case of protection-relevant events, however, the complexity of even a medium-sized device as ASDEX Upgrade requires a sophisticated and coordinated shutdown procedure rather than a simple stop of the pulse. The detection of events and their intelligent handling by the control system has been shown to be valuable also in terms of saving experiment time and cost. This paper outlines how ASDEX Upgrade's discharge control system (DCS) detects events and handles exceptions in two stages: locally and centrally. The goal of local exception handling is to limit the effect of an unexpected or asynchronous event to a minimal part of the controlled system. Thus, local exception handling facilitates robustness to failures but keeps the decision structures lean. A central state machine deals with exceptions requiring coordinated action of multiple control components. DCS implements the state machine by means of pulse schedule segments containing pre-programmed waveforms to define discharge goal and control

Associations between butane hash oil use and cannabis-related problems.

Science.gov (United States)

Meier, Madeline H

2017-10-01

High-potency cannabis concentrates are increasingly popular in the United States, and there is concern that use of high-potency cannabis might increase risk for cannabis-related problems. However, little is known about the potential negative consequences of concentrate use. This study reports on associations between past-year use of a high-potency cannabis concentrate, known as butane hash oil (BHO), and cannabis-related problems. A sample of 821 college students were recruited to complete a survey about their health and behavior. Participants who had used cannabis in the past year (33%, n=273) completed questions about their cannabis use, including their use of BHO and cannabis-related problems in eight domains: physical dependence, impaired control, academic-occupational problems, social-interpersonal problems, self-care problems, self-perception, risk behavior, and blackouts. Approximately 44% (n=121) of past-year cannabis users had used BHO in the past year. More frequent BHO use was associated with higher levels of physical dependence (RR=1.8, pcannabis-related academic/occupational problems (RR=1.5, p=0.004), poor self-care (RR=1.3, p=0.002), and cannabis-related risk behavior (RR=1.2, p=0.001). After accounting for sociodemographic factors, age of onset of cannabis use, sensation seeking, overall frequency of cannabis use, and frequency of other substance use, BHO use was still associated with higher levels of physical dependence (RR=1.2, p=0.014). BHO use is associated with greater physiological dependence on cannabis, even after accounting for potential confounders. Longitudinal research is needed to determine if cannabis users with higher levels of physiological dependence seek out BHO and/or if BHO use increases risk for physiological dependence. Copyright © 2017 Elsevier B.V. All rights reserved.

Recent progress on developments of tritium safe handling techniques in Japan

International Nuclear Information System (INIS)

Watanabe, Kuniaki; Matsuyama, Masao

1993-01-01

Vast amounts of tritium will be used for thermonuclear fusion reactors. Without establishing safe handling techniques for large amounts of tritium, undoubtedly the fusion reactors will not be accepted. Japanese activity on tritium related research has considerably developed in the last 10 years. This review paper gives a brief summary of safe handling techniques developed by Japanese research groups. (author)

How to minimise the incidence of transport-related problem behaviours in horses: a review.

Science.gov (United States)

York, Amanda; Matusiewicz, Judith; Padalino, Barbara

2017-01-01

This review aims to provide practical outcomes on how to minimise the incidence of transport-related problem behaviours (TRPBs) in horses. TRPBs are unwanted behaviours occurring during different phases of transport, most commonly, a reluctance to load and scrambling during travelling. TRPBs can result in injuries to horses and horse handlers, horse trailer accidents, disruption of time schedules, inability to attend competitions, and poor performance following travel. Therefore, TRPBs are recognised as both a horse-related risk to humans and a human-related risk to horses. From the literature, it is apparent that TRPBs are common throughout the entire equine industry, and a YouTube keyword search of 'horse trailer loading' produced over 67,000 results, demonstrating considerable interest in this topic and the variety of solutions suggested. Drawing upon articles published over the last 35 years, this review summarises current knowledge on TRPBs and provides recommendations on their identification, management, and prevention. It appears that a positive human-horse relationship, in-hand pre-training, systematic training for loading and travelling, appropriate horse handling, and the vehicle driving skills of the transporters are crucial to minimise the incidence of TRPBs. In-hand pre-training based on correct application of the principles of learning for horses and horse handlers, habituation to loading and travelling, and self-loading appear to minimise the risk of TRPBs and are therefore strongly recommended to safeguard horse and horse-handler health and welfare. This review indicates that further research and education with respect to transport management are essential to substantially decrease the incidence of TRPBs in horses.

How to Handle Abuse

Science.gov (United States)

... Handle Abuse KidsHealth / For Kids / How to Handle Abuse What's in this article? Tell Right Away How Do You Know Something Is Abuse? ... babysitter, teacher, coach, or a bigger kid. Child abuse can happen anywhere — at ... building. Tell Right Away A kid who is being seriously hurt ...

Waste Handling Building Conceptual Study

International Nuclear Information System (INIS)

G.W. Rowe

2000-01-01

The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable, and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system

Practices of Handling

DEFF Research Database (Denmark)

Ræbild, Ulla

to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...... introduces four ways whereby fashion designers apply their own bodies as tools for design; a) re-activating past garment-design experiences, b) testing present garment-design experiences c) probing for new garment-design experiences and d) design of future garment experiences by body proxy. The paper...

[Psychosocial problems and needs among cancer patients].

Science.gov (United States)

Mehlsen, Mimi Yung; Jensen, Anders Bonde; Zachariae, Bobby

2007-04-30

Cancer can have a serious impact on patient well-being and quality of life. The international literature reports a higher prevalence of psychosocial problems among cancer patients; primarily problems associated with difficulties in the family, duties in the household, work and leisure, sexuality and finances. The prevalence of these problems among Danish cancer patients is still unknown. A questionnaire assessing psychosocial problems and needs was mailed out to all patients who had been at the Department of Oncology, Aarhus Hospital in week 35, 2004. A total of 71%, i.e. 515 patients (34% men and 66% women) in active treatment and control returned the questionnaire. High levels of emotional distress were reported by 39% of the patients. High levels of distress were primarily related to problems with worries about their spouses, household duties, financial problems and experiences of insufficient collaboration between health care and social services. Between 19% and 25% of the patients required further help to handle emotional problems, legal and financial problems and practical problems in the home. A considerable proportion of oncology patients experience significant levels of distress. This group of distressed patients also report unmet needs for psychosocial support.

THE DURATION OF BORDER CONTROL PROCEDURES RELATED TO THE HANDLING OF FREIGHT TRANSPORTED BY MEANS OF SEA-ROAD TRANSPORT CHAINS AS A COMPONENT IN COMPETITIVENESS OF THE POLISH SEAPORTS

Directory of Open Access Journals (Sweden)

Michał Pluciński

2017-09-01

Full Text Available The duration of border control procedures related to the handling of freight transported by means of sea-road transport chains has become a significant component in competitiveness of seaports. The situation in this regard, existing in the Polish seaports, which was unfavourable against the background of other seaports providing services to the same supply base, resulted in the fact that a significant part of freight, i.e. mainly general containerized cargo, was handled outside the Polish seaports. The situation began to change when amendments to the regulations related to VAT (2011 and the so called “Porty 24” Package (2014 were adopted. In majority of the customs offices located in the biggest Polish seaports both the duration of services provided in relation to customs declaration and the duration of the so called “collective customs clearance” were reduced. The number of customs declarations under the simplified procedure also rose significantly. Between 2007 and 2015 customs duties and taxes in relation to the sea-land handling in Gdańsk, Gdynia, Szczecin and Świnoujście rose more than threefold.

Problem Patron Manual.

Science.gov (United States)

Brown, Marion, Comp.; And Others

This document presents guidelines for handling disruptive behavior in the Schenectady County Public Library (New York). Specific responses are listed for dealing with questions about library selection policy and sudden patron illness or injury. Also listed are responses to problem situations involving angry or irate patrons, assault or physically…

Teacher Training to Handle Bullying in the School in Indonesia

Directory of Open Access Journals (Sweden)

Hidayatus Sholihah

2016-02-01

Full Text Available There are several students in Indonesia who have suffered from injury or even died because of bullying. As a consequence, school teachers in Indonesia need to be trained to handle and prevent bullying. This essay examines the importance of pre-service and in service teacher training in order to reduce and prevent bullying in school in Indonesia by examining the problem of bullying, discussing the effects of it and providing areas of training to help teachers to tackle bullying. There are several reasons why bullying becomes serious problem in school. First of all, bullying is a complex task for teachers because it is difficult to identify and, teachers find it difficult to differentiate between bullying and fighting or horseplay. Moreover, teachers lack the knowledge and skills to handle bullying. Bullying has negative effects not only on victims but also on bullies. Victims feel lonely, depressed, and often have low self-esteem, while bullies often exhibit sign of bad temper or depression. Areas of teachers pre- service and in- service training are1 assisting teachers to differentiate between bullying and fighting or horse playing 2 developing skills to communicate with bullies and to manage classrooms where bullying occurs. In conclusion, teacher training is a good solution to tackle bullying at school in Indonesia because teachers are in the front line to solve this problem. Permalink/DOI: http://dx.doi.org/10.15408/tjems.v2i1.1786

SRV-automatic handling device

International Nuclear Information System (INIS)

Yamada, Koji

1987-01-01

Automatic handling device for the steam relief valves (SRV's) is developed in order to achieve a decrease in exposure of workers, increase in availability factor, improvement in reliability, improvement in safety of operation, and labor saving. A survey is made during a periodical inspection to examine the actual SVR handling operation. An SRV automatic handling device consists of four components: conveyor, armed conveyor, lifting machine, and control/monitoring system. The conveyor is so designed that the existing I-rail installed in the containment vessel can be used without any modification. This is employed for conveying an SRV along the rail. The armed conveyor, designed for a box rail, is used for an SRV installed away from the rail. By using the lifting machine, an SRV installed away from the I-rail is brought to a spot just below the rail so that the SRV can be transferred by the conveyor. The control/monitoring system consists of a control computer, operation panel, TV monitor and annunciator. The SRV handling device is operated by remote control from a control room. A trial equipment is constructed and performance/function testing is carried out using actual SRV's. As a result, is it shown that the SRV handling device requires only two operators to serve satisfactorily. The required time for removal and replacement of one SRV is about 10 minutes. (Nogami, K.)

Energy problem and harmony in international relations

International Nuclear Information System (INIS)

Ogata, Akira

1975-01-01

Energy problems and harmony in international relation are closely related with world politics. Oil is destined to remain as the primary energy source for the time being. The situation of oil has different implications to the U.S. and U.S.S.R., oil producing countries, and consumer countries. The hasty attitude in the past to attain energy sufficiency must be avoided by all means. Congenial harmony is to be established in international relation to meet world energy requirement. This also applies to the case of nuclear power in future. (Mori, K.)

Grain Handling and Storage.

Science.gov (United States)

Harris, Troy G.; Minor, John

This text for a secondary- or postecondary-level course in grain handling and storage contains ten chapters. Chapter titles are (1) Introduction to Grain Handling and Storage, (2) Elevator Safety, (3) Grain Grading and Seed Identification, (4) Moisture Control, (5) Insect and Rodent Control, (6) Grain Inventory Control, (7) Elevator Maintenance,…

Handling final storage of unreprocessed spent nuclear fuel

International Nuclear Information System (INIS)

1978-01-01

The present second report from KBS describes how the safe final storage of spent unreprocessed nuclear fuel can be implemented. According to the Swedish Stipulation Law, the owner must specify in which form the waste is to be stored, how final storage is to be effected, how the waste is to be transported and all other aspects of fuel handling and storage which must be taken into consideration in judging whether the proposed final storage method can be considered to be absolutely safe and feasible. Thus, the description must go beyond general plans and sketches. The description is therefore relatively detailed, even concerning those parts which are less essential for evaluating the safety of the waste storage method. For those parts of the handling chain which are the same for both alternatives of the Stipulation Law, the reader is referred in some cases to the first report. Both of the alternatives of the Stipulation Law may be used in the future. Handling equipment and facilities for the two storage methods are so designed that a combination in the desired proportions is practically feasible. In this first part of the report are presented: premises and data, a description of the various steps of the handling procedure, a summary of dispersal processes and a safety analysis. (author)

Gambling behaviors and psychopathology related to Attention-Deficit/Hyperactivity Disorder (ADHD) in problem and non-problem adult gamblers.

Science.gov (United States)

Fatseas, Melina; Alexandre, Jean-Marc; Vénisse, Jean-Luc; Romo, Lucia; Valleur, Marc; Magalon, David; Chéreau-Boudet, Isabelle; Luquiens, Amandine; Guilleux, Alice; Groupe Jeu; Challet-Bouju, Gaëlle; Grall-Bronnec, Marie

2016-05-30

Previous studies showed that Pathological Gambling and Attention Deficit/Hyperactivity Disorder (ADHD) often co-occur. The aim of this study was to examine whether ADHD is associated with specific severity patterns in terms of gambling behavior, psychopathology and personality traits. 599 problem and non-problem-gamblers were recruited in addiction clinics and gambling places in France. Subjects were assessed with the Wender-Utah Rating Scale-Child, the Adult ADHD Self-Report Scale, the Mini International Neuropsychiatric Interview, the Temperament and Character Inventory, the South Oaks Gambling Screen and questionnaires assessing gambling related cognitive distortions and gambling habits. 20.7% (n=124) of gamblers were screened positive for lifetime or current ADHD. Results from the multivariate analysis showed that ADHD was associated with a higher severity of gambling-related problems and with more psychiatric comorbidity. Among problem gamblers, subjects with history of ADHD were also at higher risk for unemployment, psychiatric comorbidity and specific dysfunctional personality traits. This study supports the link between gambling related problems and ADHD in a large sample of problem and non-problem gamblers, including problem-gamblers not seeking treatment. This points out the necessity to consider this disorder in the prevention and in the treatment of pathological gambling. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

UNCERTANITIES AND RISK IN GEOLOGICAL ACTIVITIES AND NEW WAYS OF THEIR HANDLING

Directory of Open Access Journals (Sweden)

Gyorgy Bardossy

2001-12-01

Full Text Available The authors rewiev the main types of uncertainties occuring in connection with geological investigations. The general concept of handling these uncertainties are outlined. The particular features of scalar, spatial and spatial-temporal evaluations are presented. Limitations of the traditional mathematical approach – deterministic and probabilistic – applied to geological investigations are discused. In the second part of the paper nem mathematical methods are presented that are more suitable to handle uncertaintes that the traditional ones.The fuzzy set theory seems to be one of the most efficient for geological purposes, among these methods. The problems of uncertainty in risk analysis are shortly discussed. Finally, results of test calculations performed by fuzzy arithmetic are presented.

Regulation and practice of workers' protection from chemical exposures during container handling

DEFF Research Database (Denmark)

Nørgaard Fløe Pedersen, Randi; Jepsen, Jørgen Riis; Ádám, Balázs

2014-01-01

instructions relate to container handling, the provided information is not sufficiently detailed to conduct safe practice in many aspects. In accordance with the scientific literature, the interviewees estimate that there is a high frequency (5 to 50%) of containers with hazardous chemical exposure......Background: Fumigation of freight containers to prevent spread of pests and off-gassing of freight are sources of volatile chemicals that may constitute significant health risks when released. The aim of the study was to investigate the regulation and practice of container handling in Denmark...... with focus on preventive measures to reduce risk of chemical exposure. Methods: A comprehensive systematic search of scientific literature, legislation and recommendations related to safe work with transport containers from international and Danish regulatory bodies was performed. The practice of handling...

Bottom ash handling: why the outlook is dry

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-03-15

The author believes that dry systems are the way forward for bottom ash handling at coal fired power plants. The first two commercial installations of Clyde Bergemann's DRYCON system, in China, are due to enter operation shortly. The DRY ash CONveyor (DRYCON) employs fresh air flow to cool the ash, returning reheat energy to the boiler. It also addresses some problems encountered with previous dry technologies whilst increasing ash capacity and enhancing ash cooking. The advantages of the DRYCON over the wet submerged scraper conveyor are listed. 7 figs.

Nuclear fuel handling grapple carriage with self-lubricating bearing

International Nuclear Information System (INIS)

1977-01-01

This invention relates to the provision of a fuel handling grapple carriage for a sodium cooled fast breeder reactor with sodium coolant lubricated bearings in which contamination of the bearings is prevented. (UK)

Penerapan Konsep Vehicle Routing Problem dalam Kasus Pengangkutan Sampah di Perkotaan

Directory of Open Access Journals (Sweden)

Harun Al Rasyid Lubis

2016-12-01

Full Text Available Cities in developing countries still operate a traditional waste transport and handling where rubbish were collected at regular intervals by specialized trucks from curb-side collection or transfer point prior to transport them to a final dump site. The problem are worsening as some cities experience exhausted waste collection services because the system is inadequately managed, fiscal capacity to invest in adequate vehicle fleets is lacking and also due to uncontrolled dumpsites location. In this paper problem of waste collection and handling is formulated based on Capacitated Vehicle Routing Problem Time Window Multiple Depo Intermediete Facility (CVRPTWMDIF. Each vehicle was assigned to visit several intermediate transfer points, until the truck loading or volume capacity reached then waste are transported to final landfill or dump site. Finally all trucks will return to a depot at the end of daily operation. Initially the solution of CVRPTWMDIF problem was tested on a simple hypothetical waste handling before being implemented into a real case problem. Solutions found using CVRPTWMDIF compared with the practice of waste transport and handling in the city of Bandung. Based on a common hours of operation and the same number of transport fleets, it was found that CVRPTWMDIF can reduce the volume of waste that is not transported by almost half by the end of the daily operations.

Finite element method solution of simplified P3 equation for flexible geometry handling

International Nuclear Information System (INIS)

Ryu, Eun Hyun; Joo, Han Gyu

2011-01-01

In order to obtain efficiently core flux solutions which would be much closer to the transport solution than the diffusion solution is, not being limited by the geometry of the core, the simplified P 3 (SP 3 ) equation is solved with the finite element method (FEM). A generic mesh generator, GMSH, is used to generate linear and quadratic mesh data. The linear system resulting from the SP 3 FEM discretization is solved by Krylov subspace methods (KSM). A symmetric form of the SP 3 equation is derived to apply the conjugate gradient method rather than the KSMs for nonsymmetric linear systems. An optional iso-parametric quadratic mapping scheme, which is to selectively model nonlinear shapes with a quadratic mapping to prevent significant mismatch in local domain volume, is also implemented for efficient application of arbitrary geometry handling. The gain in the accuracy attainable by the SP 3 solution over the diffusion solution is assessed by solving numerous benchmark problems having various core geometries including the IAEA PWR problems involving rectangular fuels and the Takeda fast reactor problems involving hexagonal fuels. The reference transport solution is produced by the McCARD Monte Carlo code and the multiplication factor and power distribution errors are assessed. In addition, the effect of quadratic mapping is examined for circular cell problems. It is shown that significant accuracy gain is possible with the SP 3 solution for the fast reactor problems whereas only marginal improvement is noted for thermal reactor problems. The quadratic mapping is also quite effective handling geometries with curvature. (author)

Press problem related to nuclear energy news reporting

International Nuclear Information System (INIS)

Arai, Mitsuo

2008-01-01

Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)

Cask system design guidance for robotic handling

International Nuclear Information System (INIS)

Griesmeyer, J.M.; Drotning, W.D.; Morimoto, A.K.; Bennett, P.C.

1990-10-01

Remote automated cask handling has the potential to reduce both the occupational exposure and the time required to process a nuclear waste transport cask at a handling facility. The ongoing Advanced Handling Technologies Project (AHTP) at Sandia National Laboratories is described. AHTP was initiated to explore the use of advanced robotic systems to perform cask handling operations at handling facilities for radioactive waste, and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof-of-concept robotic systems developed in AHTP are intended to extrapolate from currently available commercial systems to the systems that will be available by the time that a repository would be open for operation. The project investigates those cask handling operations that would be performed at a nuclear waste repository facility during cask receiving and handling. The ongoing AHTP indicates that design guidance, rather than design specification, is appropriate, since the requirements for robotic handling do not place severe restrictions on cask design but rather focus on attention to detail and design for limited dexterity. The cask system design features that facilitate robotic handling operations are discussed, and results obtained from AHTP design and operation experience are summarized. The application of these design considerations is illustrated by discussion of the robot systems and their operation on cask feature mock-ups used in the AHTP project. 11 refs., 11 figs

The relation of eating problems and amenorrhea in ballet dancers.

Science.gov (United States)

Brooks-Gunn, J; Warren, M P; Hamilton, L H

1987-02-01

Exercise-induced amenorrhea has received considerable attention in the medical literature. The combination of exercise and low body weight is thought to exert synergistic effects in the pathogenesis of amenorrhea, while the role of dieting and eating problems, another possible causative mechanism, has not been examined. A sample of 55 adult dancers in national and regional classical ballet companies was studied; their mean age was 24.7 yr. Fifty-six percent of the dancers had delayed menarche (age 14 or later) and 19% of the sample were currently amenorrheic (5 months or longer). One-third of the dancers reported having had an eating problem (self-reported anorexia nervosa or bulimia). Amenorrhea and reported eating problems were significantly related: 50% of amenorrheics reported anorexia nervosa while 13% of the normals did. In addition, prolonged amenorrhea was significantly related to dieting (as measured by EAT-26 scales, a measure of dieting behavior). As expected, leanness and absolute weight also were related to prolonged amenorrhea. Amenorrhea in this sample of adult dancers was not related to current activity level or age at which training began. Thus, eating problems may be one factor in the pathogenesis of prolonged amenorrhea in certain athletic groups.

Logistics of Transport and Handling with the Waste in the Upper Gemer region

Directory of Open Access Journals (Sweden)

Ján Spišák

2005-11-01

Full Text Available In the future, not any society (even the most advanced society can exists without waste formed by production processes or by any human activity. Increasing of the waste volume as well as its structure influences the living space of the mankind in a negative way. Therefore, the production, disposal or the exploitation of the waste is not only ecological but also the economical problem for the whole society. New methods of handling and disposal of the waste are preferred. This contribution is oriented on the application of micrologistics proceedings in order to reach a more effective system of transporting and handling with the waste.

Production management of window handles

Directory of Open Access Journals (Sweden)

Manuela Ingaldi

2014-12-01

Full Text Available In the chapter a company involved in the production of aluminum window and door handles was presented. The main customers of the company are primarily companies which produce PCV joinery and wholesalers supplying these companies. One chosen product from the research company - a single-arm pin-lift window handle - was described and its production process depicted technologically. The chapter also includes SWOT analysis conducted in the research company and the value stream of the single-arm pin-lift window handle.

7 CFR 58.443 - Whey handling.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of whey. If outside, necessary precautions shall be taken to minimize flies, insects and development of...

Problem solving of student with visual impairment related to mathematical literacy problem

Science.gov (United States)

Pratama, A. R.; Saputro, D. R. S.; Riyadi

2018-04-01

The student with visual impairment, total blind category depends on the sense of touch and hearing in obtaining information. In fact, the two senses can receive information less than 20%. Thus, students with visual impairment of the total blind categories in the learning process must have difficulty, including learning mathematics. This study aims to describe the problem-solving process of the student with visual impairment, total blind category on mathematical literacy issues based on Polya phase. This research using test method similar problems mathematical literacy in PISA and in-depth interviews. The subject of this study was a student with visual impairment, total blind category. Based on the result of the research, problem-solving related to mathematical literacy based on Polya phase is quite good. In the phase of understanding the problem, the student read about twice by brushing the text and assisted with information through hearing three times. The student with visual impairment in problem-solving based on the Polya phase, devising a plan by summoning knowledge and experience gained previously. At the phase of carrying out the plan, students with visual impairment implement the plan in accordance with pre-made. In the looking back phase, students with visual impairment need to check the answers three times but have not been able to find a way.

Factors affecting food handling Practices among food handlers of Dangila town food and drink establishments, North West Ethiopia

Science.gov (United States)

2014-01-01

Background Food borne diseases are major health problems in developed and developing countries including Ethiopia. The problem is more noticeable in developing countries due to prevailing poor food handling and sanitation practices, inadequate food safety laws, weak regulatory systems, lack of financial resources to invest on safer equipments, and lack of education for food handlers. Methods The objective of this study was to assess food handling practice and associated factors among food handlers working in food and drinking establishments of Dangila town, North West Ethiopia. Cross-sectional quantitative study design was conducted among 406 food handlers working in 105 food and drink establishments from July to August 2013 in Dangila town. Data were collected using face to face interview with pretested structured questionnaire and physical observation. Result The mean age of the respondents was 22.7 ± 4.2 years of which 62.8% of the food handlers were females. Two hundred thirteen (52.5%) of food handlers had good food handling practices. Marital status (AOR = 7.52, 95% CI, 1.45-38.97), monthly income (AOR = 0.395, 95% CI, 0.25-0.62), knowledge about food handling (AOR = 1.69, 95% CI, 1.05-2.73), existence of shower facility (AOR = 1.89, 95% CI, 1.12-3.21) and separate dressing room (AOR = 1.97, 95% CI, 1.11-3.49) were found to be significantly associated with good food handling Practices. Conclusion Above half of food handlers had good food handling practices. Marital status, monthly income, knowledge status, existence of shower facility, existence of separate dressing room and presence of insect and rodent were factors associated with food handling Practices. PMID:24908104

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

Problems in tritium handling in fusion reactors studies at CEA within the european effort

International Nuclear Information System (INIS)

Roth, E.; Hircq, B.; Fidelle, J.P.

1988-01-01

Technological aspects of tritium handling linked with the operation of a fusion reactor are reviewed. Tritium storage is discussed from the point of view of the volumme of a single unit and of the nature of the metal bed. Purification of tritium and recovery from tritiated compounds is studied, including conversion from water to the gaseous form. Interaction of tritium and structural materials is developed from the point of view of corrosion, embrittlement, permeation. A flowsheet displaying a conception of a reference tritium circuit is proposed, and consideration is given to specifications of large components, namely pumps and gatevalves for tritium circuits

Development of commercial robots for radwaste handling

International Nuclear Information System (INIS)

Colborn, K.A.

1988-01-01

The cost and dose burden associated with low level radwaste handling activities is a matter of increasing concern to the commercial nuclear power industry. This concern is evidenced by the fact that many utilities have begun to revaluate waste generation, handling, and disposal activities at their plants in an effort to improve their overall radwaste handling operations. This paper reports on the project Robots for Radwaste Handling, to identify the potential of robots to improve radwaste handling operations. The project has focussed on the potential of remote or automated technology to improve well defined, recognizable radwaste operations. The project focussed on repetitive, low skill level radwaste handling and decontamination tasks which involve significant radiation exposure

Safe Handling of Radioisotopes. Medical Addendum

International Nuclear Information System (INIS)

Hercik, F.; Jammet, H.

1960-01-01

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains information necessary to medical officers concerned with the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the medical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Preoperational checkout of the remote-handled transuranic waste handling at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

1987-09-01

This plan describes the preoperational checkout for handling Remote-Handled Transuranic (RH-TRU) Wastes from their receipt at the Waste Isolation Pilot Plant (WIPP) to their emplacement underground. This plan identifies the handling operations to be performed, personnel groups responsible for executing these operations, and required equipment items. In addition, this plan describes the quality assurance that will be exercised throughout the checkout, and finally, it establishes criteria by which to measure the success of the checkout. 7 refs., 5 figs

The gas cushion technique as a handling means for the remote removal of tokamak segments

International Nuclear Information System (INIS)

Removille, J.; Stephano, R.

1983-01-01

The gas cushion technique has been studied as offering a compact, flexible and safe way of handling massive objects. The evolution of the gas-cushion handling philosophy is discussed and examples presented related to the displacements of different loads in the torus and in the reactor hall. A short technical comparison with the C-frame handling concept is made in the conclusion. (author)

Preference Handling for Artificial Intelligence

OpenAIRE

Goldsmith, Judy; University of Kentucky; Junker, Ulrich; ILOG

2009-01-01

This article explains the benefits of preferences for AI systems and draws a picture of current AI research on preference handling. It thus provides an introduction to the topics covered by this special issue on preference handling.

Texas passes first law for safe patient handling in America: landmark legislation protects health-care workers and patients from injury related to manual patient lifting.

Science.gov (United States)

Hudson, Mary Anne

2005-01-01

compensation costs. Because the health-care industry has relied on people to do the work of machines, nursing work remains the most dangerous occupation for disabling back injury. Back injury from patient lifting may be the single largest contributor to the nursing shortage, with perhaps 12% of nurses leaving or being terminated because of back injury. The US health-care industry has not kept pace with other industries, which provide mechanical lift equipment for lifting loads equivalent to the weight of patients, or with other countries, such as Australia and England, which are more advanced in their use of modern technology for patient lifting and with no-lifting practices in compliance with government regulations and nursing policies banning manual lifting. With Texas being the first state to succeed in passing legislation for safe patient handling, other states are working toward legislative protection against injury with manual patient lifting. California re-introduced safe patient handling legislation on February 17, 2005, with CA SB 363, Hospitals: Lift Teams, following the September 22, 2004, veto of CA AB 2532 by Governor Arnold Schwarzenegger, who said he believes existing statutory protection and workplace safety standards are sufficient to protect health care workers from injury. Massachusetts HB 2662, Relating to Safe Patient Handling in Certain Health Facilities, was introduced December 1, 2004. Ohio HB 67, signed March 21, 2005 by Governor Bob Taft (R), creates a program for interest-free loans to nursing homes for implementation of a no-manual-lift program. New York companion bills AB 7641 and SB 4029 were introduced in April, 2005, calling for creation of a 2-year study to establish safe patient handling programs and collect data on nursing staff and patient injury with manual patient handling versus lift equipment, to determine best practices for improving health and safety of health-care workers and patients during patient handling. Washington State is

EBR-II fuel handling console digital upgrade

International Nuclear Information System (INIS)

Peters, G.G.; Wiege, D.D.; Christensen, L.J.

1995-01-01

The main fuel handling console and control system at the Experimental Breeder Reactor II (EBR-II) are being upgraded to a computerized system using high-end workstations for the operator interface and a programmable logic controller (PLC) for the control system. Two-dimensional (2D) and three-dimensional (3D) computer graphics will be provided for the operator which will show the relative position of under-sodium fuel handling equipment. This equipment is operated remotely with no means of directly viewing the transfer. This paper describes various aspects of the modification including reasons for the upgrade, capabilities the new system provides over the old control system, philosophies and rationale behind the new design, testing and simulation work, diagnostic features, and the advanced graphics techniques used to display information to the operator

Nuclear liability claims handling and costs - Germany and some comparative solutions

International Nuclear Information System (INIS)

Harbruecker, D.

2000-01-01

Comparison of legal status in Central Europe: coverage by insurance and State intervention, coverage of legal expenses and interests on awards technical problems of claims handing after a nuclear incident: guidelines to be prepared by insurer before and not after an incident occurred, demands on provider of financial security claims handling for part guaranteed by State to be transferred to insurer, necessary regulations of such arrangements (author)

Ethnic Differences in Relations between Family Process and Child Internalizing Problems

Science.gov (United States)

Vendlinski, Matthew; Silk, Jennifer S.; Shaw, Daniel S.; Lane, Tonya J.

2006-01-01

Background: Family process variables have been linked to child problem behavior, but recent research suggests that child ethnicity may moderate relations between family process and child outcomes. The current study examined how ethnicity moderates relations between parent conflict, parent-child relationship quality, and internalizing problems.…

Cannabis-Related Problems and Social Anxiety: The Mediational Role of Post-Event Processing.

Science.gov (United States)

Ecker, Anthony H; Buckner, Julia D

2018-01-02

Cannabis is the most commonly used illicit drug in the US, and is associated with a range of psychological, social, and physical health-related problems. Individuals who endorse elevated levels of social anxiety are especially at risk for experiencing cannabis-related problems, including cannabis use disorder, despite not using cannabis more often than those with more normative social anxiety. Identification of mechanisms that underlie the relationship between social anxiety and cannabis-related problems may inform treatment and prevention efforts. Post-event processing (PEP, i.e., cognitively reviewing past social interactions/performances) is a social anxiety-related phenomenon that may be one such mechanism. The current study sought to test PEP as a mediator of the relationship between social anxiety and cannabis-related problems, adjusting for cannabis use frequency. Cannabis-using (past 3-month) undergraduate students recruited in 2015 (N = 244; 76.2% female; 74.2% Non-Hispanic Caucasian) completed an online survey of cannabis use, cannabis-related problems, social anxiety, and PEP. Bootstrap estimate of the indirect effect of social anxiety through PEP was significant, suggesting PEP is a mediator of the social anxiety-cannabis-related problems relationship. Conclusions/Importance: Treatment and prevention efforts may benefit from targeting PEP among individuals with elevated social anxiety and cannabis-related problems.

PRN 73-4: Residual Insecticides in Food Handling Establishments

Science.gov (United States)

This notice provides a copy of a Federal Register notice published July 6, 1973, regarding certain insecticides used in food-handling establishments. It establishes certain definitions and requirements related to approval for crack and crevice treatment.

How Retailers Handle Complaint Management

DEFF Research Database (Denmark)

Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy

2009-01-01

This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained as to the......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived...

A New Approach for Handling of Micro Parts in Bulk Metal Forming

DEFF Research Database (Denmark)

Mahshid, Rasoul; Hansen, Hans Nørgaard; Arentoft, M.

2012-01-01

of production [1]. This can fulfill the demands for mass production and miniaturization in industries and academic communities. According to the recent studies, topics related to materials, process and simulation have been investigated intensively and well documented. Machines, forming tools and handling...... systems are critical elements to complete micro forming technology for transferring knowledge to industries and toward miniature manufacturing systems (micro factory) [2]. Since most metal forming processes are multi stage, making a new handling system with high reliability on accuracy and speed...... have been optimized or handling systems based on new concepts for gripping and releasing micro parts have been proposed. Making a handling system for micro parts made by sheet metals or foils is easier than those in bulk metal forming because parts are attached to the sheet during the forming process...

7 CFR 926.9 - Handle.

Science.gov (United States)

2010-01-01

... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle...

Biodiesel Handling and Use Guide (Fifth Edition)

Energy Technology Data Exchange (ETDEWEB)

Alleman, T.L.; McCormick, R.L.; Christensen, E.D.; Fioroni, G.; Moriarty. K.; Yanowitz, J.

2016-11-08

This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.

Special relativity. An introduction with 200 problems and solutions

International Nuclear Information System (INIS)

Tsamparlis, Michael

2010-01-01

This textbook develops Special Relativity in a systematic way assuming no prior knowledge of Relativity; however the student is assumed to be familiar with the basics of the standard vector calculus. The approach is structural in the sense that it develops Special Relativity in Minkowski space following the same steps with the development of Newtonian Physics in Euclidian space. A second characteristic of the book is that it discusses the mathematics of the theory independently of the physical principles, so that the reader will appreciate its role in the development of the physical theory. The book is intended to be used both as a text-book for a teaching course in Special Relativity but also as a reference book for the future. In that respect it is linked to an online repository with more than 500 problems, carefully classified according to subject area and solved in detail, providing an independent problem book on Special Relativity. (orig.)

Special relativity. An introduction with 200 problems and solutions

Energy Technology Data Exchange (ETDEWEB)

Tsamparlis, Michael [Athens Univ., Zografos (Greece). Dept. of Astrophysics, Astronomy and Mechanics

2010-07-01

This textbook develops Special Relativity in a systematic way assuming no prior knowledge of Relativity; however the student is assumed to be familiar with the basics of the standard vector calculus. The approach is structural in the sense that it develops Special Relativity in Minkowski space following the same steps with the development of Newtonian Physics in Euclidian space. A second characteristic of the book is that it discusses the mathematics of the theory independently of the physical principles, so that the reader will appreciate its role in the development of the physical theory. The book is intended to be used both as a text-book for a teaching course in Special Relativity but also as a reference book for the future. In that respect it is linked to an online repository with more than 500 problems, carefully classified according to subject area and solved in detail, providing an independent problem book on Special Relativity. (orig.)

Special Relativity An Introduction with 200 Problems and Solutions

CERN Document Server

Tsamparlis, Michael

2010-01-01

This textbook develops Special Relativity in a systematic way assuming no prior knowledge of Relativity; however the student is assumed to be familiar with the basics of the standard vector calculus. The approach is structural in the sense that it develops Special Relativity in Minkowski space following the same steps with the development of Newtonian Physics in Euclidian space. A second characteristic of the book is that it discusses the mathematics of the theory independently of the physical principles, so that the reader will appreciate its role in the development of the physical theory. The book is intended to be used both as a text-book for a teaching course in Special Relativity but also as a reference book for the future. In that respect it is linked to an online repository with more than 500 problems, carefully classified according to subject area and solved in detail, providing an independent problem book on Special Relativity.

Electronic Publishing or Electronic Information Handling?

Science.gov (United States)

Heck, A.

The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

Saving our backs: safe patient handling and mobility for home care.

Science.gov (United States)

Beauvais, Audrey; Frost, Lenore

2014-01-01

Predicted work-related injuries for nurses and home healthcare workers are on the rise given the many risk factors in the home environment and the escalating demands for home healthcare workers in the United States. Fortunately, safe patient handling and mobility programs can dramatically decrease injuries. Despite strides being made to promote safe patient handling and mobility programs in acute care, more can be done to establish such initiatives in the home care setting.

Handling of network and database instabilities in CORAL

International Nuclear Information System (INIS)

Trentadue, R; Valassi, A; Kalkhof, A

2012-01-01

The CORAL software is widely used by the LHC experiments for storing and accessing data using relational database technologies. CORAL provides a C++ abstraction layer that supports data persistency for several back-ends and deployment models, direct client access to Oracle servers being one of the most important use cases. Since 2010, several problems have been reported by the LHC experiments in their use of Oracle through CORAL, involving application errors, hangs or crashes after the network or the database servers became temporarily unavailable. CORAL already provided some level of handling of these instabilities, which are due to external causes and cannot be avoided, but this proved to be insufficient in some cases and to be itself the cause of other problems, such as the hangs and crashes mentioned before, in other cases. As a consequence, a major redesign of the CORAL plugins has been implemented, with the aim of making the software more robust against these database and network glitches. The new implementation ensures that CORAL automatically reconnects to Oracle databases in a transparent way whenever possible and gently terminates the application when this is not possible. Internally, this is done by resetting all relevant parameters of the underlying back-end technology (OCI, the Oracle Call Interface). This presentation reports on the status of this work at the time of the CHEP2012 conference, covering the design and implementation of these new features and the outlook for future developments in this area.

Micro manipulators to handle micro machines. ; Aiming at developing clever and deft robots. Micro machine wo handling surutameno micro manipulator. ; Kashikoku kiyo na robot kaihatsu wo mezashite

Energy Technology Data Exchange (ETDEWEB)

Fujie, M [Hitachi, Ltd., Tokyo (Japan)

1991-11-15

The current state of micro manipulators (MM) to control micro machines is described. No MM can be realized with the conventional robots of which finger positions and attitudes are controlled by information on angles of each articulate. To solve this problem, such a system using the conception called a master slave manipulator with complex structure is proposed, in which human ways of manipulation are coupled with master arms with simple structure and slave arms facilitating works via a computer. The MM requires a flexible articulate chaining mechanism when the considerations on smallness of the arm structure and chaining of the multiple actuators are taken. To control the relative positions and attitudes, development of the control algorithm is required, which can learn the command signals given to a large number of actuators to drive mechanisms with ultra high freedoms and the relationship among changes in the end effector movements, rotation and directions, and can perform works according to precise relative positioning of objects to be handled. 8 refs., 4 figs.

Remote handling at LAMPF

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1983-01-01

Experimental area A at the Clinton P. Anderson Meson Physics Facility (LAMPF) encompasses a large area. Presently there are four experimental target cells along the main proton beam line that have become highly radioactive, thus dictating that all maintenance be performed remotely. The Monitor remote handling system was developed to perform in situ maintenance at any location within area A. Due to the complexity of experimental systems and confined space, conventional remote handling methods based upon hot cell and/or hot bay concepts are not workable. Contrary to conventional remote handling which require special tooling for each specifically planned operation, the Monitor concept is aimed at providing a totally flexible system capable of remotely performing general mechanical and electrical maintenance operations using standard tools. The Monitor system is described

Some problems of solar-terrestrial energy relations

International Nuclear Information System (INIS)

Kovalevskij, I.V.

1982-01-01

Energy aspects of relations of phenomena occurring on the Sun, in the interplanetary space, magnetosphere, ionosphere and on the Earth's surface are discussed. Particular attention is given to the energy radiated by the Sun (flares, coronal holes). The problems are considered of the energy transfer and transformation in high-velocity and flare flows of solar wind. Estimates are performed: of densities of various types of energy of the interplanetary space at the Earth's orbit level; energy fluxes incident on the magnetosphere; energy accumulated inside the magnetosphere; a series of energy parameters of magnetic storms. It is pointed out that nowadays one of the main problems of the magnetosphere physics is studying ways of the interplanatary space energy transfer into the magnetosphere. In this connection some problems are investigated: plasma penetration through the dayside magnetopause, solar wind plasma entry into the magnetotail, the electric field effect on transition region plasma penetration into the distant magnetotail

Inverse simulation system for evaluating handling qualities during rendezvous and docking

Science.gov (United States)

Zhou, Wanmeng; Wang, Hua; Thomson, Douglas; Tang, Guojin; Zhang, Fan

2017-08-01

The traditional method used for handling qualities assessment of manned space vehicles is too time-consuming to meet the requirements of an increasingly fast design process. In this study, a rendezvous and docking inverse simulation system to assess the handling qualities of spacecraft is proposed using a previously developed model-predictive-control architecture. By considering the fixed discrete force of the thrusters of the system, the inverse model is constructed using the least squares estimation method with a hyper-ellipsoidal restriction, the continuous control outputs of which are subsequently dispersed by pulse width modulation with sensitivity factors introduced. The inputs in every step are deemed constant parameters, and the method could be considered as a general method for solving nominal, redundant, and insufficient inverse problems. The rendezvous and docking inverse simulation is applied to a nine-degrees-of-freedom platform, and a novel handling qualities evaluation scheme is established according to the operation precision and astronauts' workload. Finally, different nominal trajectories are scored by the inverse simulation and an established evaluation scheme. The scores can offer theoretical guidance for astronaut training and more complex operation missions.

MRI of meniscal bucket-handle tears

Energy Technology Data Exchange (ETDEWEB)

Magee, T.H.; Hinson, G.W. [Menorah Medical Center, Overland Park, KS (United States). Dept. of Radiology

1998-09-01

A meniscal bucket-handle tear is a tear with an attached fragment displaced from the meniscus of the knee joint. Low sensitivity of MRI for detection of bucket-handle tears (64% as compared with arthroscopy) has been reported previously. We report increased sensitivity for detecting bucket-handle tears with the use of coronal short tau inversion recovery (STIR) images. Results. By using four criteria for diagnosis of meniscal bucket-handle tears, our overall sensitivity compared with arthroscopy was 93% (28 of 30 meniscal bucket-handle tears seen at arthroscopy were detected by MRI). The meniscal fragment was well visualized in all 28 cases on coronal STIR images. The double posterior cruciate ligament sign was seen in 8 of 30 cases, the flipped meniscus was seen in 10 of 30 cases and a fragment in the intercondylar notch was seen in 18 of 30 cases. (orig.)

Microphone Handling Noise: Measurements of Perceptual Threshold and Effects on Audio Quality.

Directory of Open Access Journals (Sweden)

Paul Kendrick

Full Text Available A psychoacoustic experiment was carried out to test the effects of microphone handling noise on perceived audio quality. Handling noise is a problem affecting both amateurs using their smartphones and cameras, as well as professionals using separate microphones and digital recorders. The noises used for the tests were measured from a variety of devices, including smartphones, laptops and handheld microphones. The signal features that characterise these noises are analysed and presented. The sounds include various types of transient, impact noises created by tapping or knocking devices, as well as more sustained sounds caused by rubbing. During the perceptual tests, listeners auditioned speech podcasts and were asked to rate the degradation of any unwanted sounds they heard. A representative design test methodology was developed that tried to encourage everyday rather than analytical listening. Signal-to-noise ratio (SNR of the handling noise events was shown to be the best predictor of quality degradation. Other factors such as noise type or background noise in the listening environment did not significantly affect quality ratings. Podcast, microphone type and reproduction equipment were found to be significant but only to a small extent. A model allowing the prediction of degradation from the SNR is presented. The SNR threshold at which 50% of subjects noticed handling noise was found to be 4.2 ± 0.6 dBA. The results from this work are important for the understanding of our perception of impact sound and resonant noises in recordings, and will inform the future development of an automated predictor of quality for handling noise.

Performance Evaluation and Suggestion of Upgraded Fuel Handling Equipment for Operating OPR1000

International Nuclear Information System (INIS)

Chang, Sang Gyoon; Hwang, Jeung Ki; Choi, Taek Sang; Na, Eun Seok; Lee, Myung Lyul; Baek, Seung Jin; Kim, Man Su; Kunik, Jack

2011-01-01

The purpose of this study is to evaluate the performance of upgraded FHE (Fuel Handling Equipment) for operating OPR 1000 (Optimized Power Reactor) by using data measured during the fuel reloading, and make some suggestions on enhancing the performance of the FHE. The fuel handling equipment, which serves critical processes in the refueling outage, has been upgraded to increase and improve the operational availability of the plant. The evaluation and suggestion of this study can be a beneficial tool related to the performance of the fuel handling equipment

Handling Qualities Flight Testing of the Stratospheric Observatory for Infrared Astronomy (SOFIA)

Science.gov (United States)

Glaser, Scott T.; Strovers, Brian K.

2011-01-01

Airborne infrared astronomy has a long successful history, albeit relatively unknown outside of the astronomy community. A major problem with ground based infrared astronomy is the absorption and scatter of infrared energy by water in the atmosphere. Observing the universe from above 40,000 ft puts the observation platform above 99% of the water vapor in the atmosphere, thereby addressing this problem at a fraction of the cost of space based systems. The Stratospheric Observatory For Infrared Astronomy (SOFIA) aircraft is the most ambitious foray into the field of airborne infrared astronomy in history. Using a 747SP (The Boeing Company, Chicago, Illinois) aircraft modified with a 2.5m telescope located in the aft section of the fuselage, the SOFIA endeavors to provide views of the universe never before possible and at a fraction of the cost of space based systems. The modification to the airplane includes moveable doors and aperture that expose the telescope assembly. The telescope assembly is aimed and stabilized using a multitude of on board systems. This modification has the potential to cause aerodynamic anomalies that could induce undesired forces either at the cavity itself or indirectly due to interference with the empennage, both of which could cause handling qualities issues. As a result, an extensive analysis and flight test program was conducted from December 2009 through March 2011. Several methods, including a Lower Order Equivalent Systems analysis and pilot assessment, were used to ascertain the effects of the modification. The SOFIA modification was found to cause no adverse handling qualities effects and the aircraft was cleared for operational use. This paper discusses the history and modification to the aircraft, development of test procedures and analysis, results of testing and analysis, lessons learned for future projects and justification for operational certification.

SIMULATION OF DRIVER’S LOCOMOTIVE-HANDLING ACTIVITY USING THE THEORY OF FUZZY GRAPHS

Directory of Open Access Journals (Sweden)

T. V. Butko

2015-03-01

Full Text Available Purpose. The efficiency and safety of locomotive control improving is important and relevant scientific and practical problem. Every driver during the trains-handling bases on his experience and knowledge, that is why the compilation and detection the most efficient ways to control the locomotive-handling is one of the stages of measures development to reduce transportation costs. The purpose of this paper is a formalization process description of locomotive-handling and quality parameters determination of this process. Methodology. In order to achieve this goal the theory of fuzzy probabilistic graphs was used. Vertices of the graph correspond to the events start and end operations at train-handling. The graph arcs describe operations on train-handling. Graph consists of thirteen peaks corresponding to the main control actions of the engine-driver. The weighting factors of transitions between vertices are assigned by fuzzy numbers. Their values were obtained by expert estimates. Fuzzy probabilities and transition time are presented as numbers with trapezoidal membership function. Findings. Using successive merging of parallel arcs, loops and vertices elimination, the equivalent fuzzy graph of train-handling and the corresponding L-matrix were obtained. Equivalent graph takes into account separately activity of the driver during normal operation and during emergency situations. Originality. The theoretical foundations of describing process formalization in driver’s locomotive-handling activity were developed using the fuzzy probabilistic graph. The parameters characterizing the decision-making process of engineer were obtained. Practical value. With the resulting model it is possible to estimate the available reserves for the quality improvement of locomotive-handling. Reduction in the time for decision-making will lead to the approximation the current mode of control to the rational one and decrease costs of hauling operations. And reduction

Review of xenon-133 production and related problems

International Nuclear Information System (INIS)

Barrachina, M.; Ropero, M.

1980-01-01

A literature survey is given on the production methods of fission xenon-133 and related problems, such as purification, metrological and dosimetric aspects, preparation of isotopic solutions, recycling, etc. 127 references are included. (Author) 127 refs

Cable handling

International Nuclear Information System (INIS)

1980-01-01

In computerized axial tomography scanning, problems arise in exchanging electrical signals between fixed and rotating assemblies. A novel method of overcoming this problem is described in detail for both signal and high voltage cables. Apparatus using a sequence of drums and pulleys is used to maintain the interconnecting cables in a neat arrangement and free from mechanical strain. The apparatus is simple and relatively easy and inexpensive to assemble and maintain. (UK)

Statistics and Corporate Environmental Management: Relations and Problems

DEFF Research Database (Denmark)

Madsen, Henning; Ulhøi, John Parm

1997-01-01

Statistical methods have long been used to analyse the macroeconomic consequences of environmentally damaging activities, political actions to control, prevent, or reduce these damages, and environmental problems in the natural environment. Up to now, however, they have had a limited and not very...... specific use in corporate environmental management systems. This paper will address some of the special problems related to the use of statistical techniques in corporate environmental management systems. One important aspect of this is the interaction of internal decisions and activities with conditions...

Sophisticated fuel handling system evolved

International Nuclear Information System (INIS)

Ross, D.A.

1988-01-01

The control systems at Sellafield fuel handling plant are described. The requirements called for built-in diagnostic features as well as the ability to handle a large sequencing application. Speed was also important; responses better than 50ms were required. The control systems are used to automate operations within each of the three main process caves - two Magnox fuel decanners and an advanced gas-cooled reactor fuel dismantler. The fuel route within the fuel handling plant is illustrated and described. ASPIC (Automated Sequence Package for Industrial Control) which was developed as a controller for the plant processes is described. (U.K.)

State Confessional Relations: Problem of the Subject Structure

Directory of Open Access Journals (Sweden)

Alexandra A. Dorskaya

2014-06-01

Full Text Available In the article various existing definitions of the concept "state and confessional relations" are analyzed, also author's definition is offered. Three levels of the state and confessional relations are revealed: conceptual, legislative and administrative-managerial. In the article it is shown that in Russia a tradition of only two subjects of the state and confessional relations – government bodies and the religious organizations allocation exists. It is revealed that at the present stage many researchers are dissatisfied with such situation. Scientific sources of the problem of the state and church relations within the psychological school of the law, which are addressed to the personality and experiences in the legal sphere are studied and revealed. Special attention is paid to scientific heritage of the M.A. Reysner, who was one of the first to begin study of this problem. In the article the question of the school of three subjects of the state and confessional relations allocation formation, what adds the faithful or faithless personality in addition to two traditional subjects is analyzed. The state and confessional relations are considered in the context of the human rights development. The question of new type of the believer possessing high education level and knowledge formation is considered. In the article it is shown that at the present stage relations of any regulation between the state and religious organizations is based on the basis of international legal standards, domestic legislation and norms of canon law.

On issues of constructing an exception handling mechanism for CSP-based process-oriented concurrent software

NARCIS (Netherlands)

Jovanovic, D.S.; Orlic, B.; Broenink, Johannes F.; Broenink, J.F.; Roebers, H.W.; Sunter, J.P.E.; Welch, P.H.; Wood, D.C.

2005-01-01

This paper discusses issues, possibilities and existing approaches for fitting an exception handling mechanism (EHM) in CSP-based process-oriented software architectures. After giving a survey on properties desired for a concurrent EHM, specific problems and a few principal ideas for including

Management of remote-handled defense transuranic wastes

International Nuclear Information System (INIS)

Ebra, M.A.; Pierce, G.D.; Carson, P.H.

1988-01-01

Transuranic (TRU) wastes generated by defense-related activities are scheduled for emplacement at the Waste Isolation Pilot Plant (WIPP) in New Mexico beginning in October 1988. After five years of operation as a research and development facility, the WIPP may be designated as a permanent repository for these wastes, if it has been demonstrated that this deep, geologically stable formation is a safe disposal option. Defense TRU wastes are currently stored at various Department of Energy (DOE) sites across the nation. Approximately 2% by volume of currently stored TRU wastes are defined, on the basis of dose rates, as remote-handled (RH). RH wastes continue to be generated at various locations operated by DOE contractors. They require special handling and processing prior to and during emplacement in the WIPP. This paper describes the strategy for managing defense RH TRU wastes

Employers’ View on Problems Related to Workforce Skills and Qualification

Directory of Open Access Journals (Sweden)

Klimplová Lenka

2012-12-01

Full Text Available The aim of this exploratory study is to reveal employers’ views on problems related to workforce human capital (skills and qualification. Where do employers themselves view the core of difficulties with ensuring adequately skilled workforce? Do they assign them to technological and organizational changes (a functional concept of job-specific human capital obsolescence, or do they see these problems as a result of other circumstances, such as macro-structural conditions or institutional settings? To answer these questions selected employers in mechanical engineering and information technology sectors in the Czech Republic were interviewed. The results show that the employers see the problems: 1 on the side of workforce – insufficient abilities and skills, exaggerated demands and low motivation; 2 as inadequate capacities and capabilities of the organization itself; 3 at macro-level as institutional shortcomings in the initial educational system and social benefits system. The problems related to workforce skills and qualification cannot be, thus, interpreted only in the functionalist view as job-specific human capital obsolescence, but the formulation of the problems is significantly affected by the institutional framework.

Relational topology

CERN Document Server

Schmidt, Gunther

2018-01-01

This book introduces and develops new algebraic methods to work with relations, often conceived as Boolean matrices, and applies them to topology. Although these objects mirror the matrices that appear throughout mathematics, numerics, statistics, engineering, and elsewhere, the methods used to work with them are much less well known. In addition to their purely topological applications, the volume also details how the techniques may be successfully applied to spatial reasoning and to logics of computer science. Topologists will find several familiar concepts presented in a concise and algebraically manipulable form which is far more condensed than usual, but visualized via represented relations and thus readily graspable. This approach also offers the possibility of handling topological problems using proof assistants.

Handling the text in translator education from the perspective of cognitive translatology: A case study

Directory of Open Access Journals (Sweden)

Diana Prodanović Stankić

2017-06-01

Full Text Available The aim of this paper i s to report on the findings of a pilot case study that was done in order to shed more light on the application of cognitive linguistic approaches to translation studies and translation pedagogy. The study aims to identify the extent to which cognitive cons trual operations such as categorizing according to the prototype effects, and figure - ground reversal may be used in problem solving and decision making tasks related to meaning construction and translating the given texts. It is hypothesized that collabora tive – based approach motivates students more to discuss and make use of the abovementioned cognitive construals when aiming at semantic precision in handling the texts. The results of the study indicate a decrease in errors related to word choice in the tra nslated texts.

9 CFR 3.118 - Handling.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.118 Section 3.118 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine...

A Perspective on Remote Handling Operations and Human Machine Interface for Remote Handling in Fusion

International Nuclear Information System (INIS)

Haist, B.; Hamilton, D.; Sanders, St.

2006-01-01

A large-scale fusion device presents many challenges to the remote handling operations team. This paper is based on unique operational experience at JET and gives a perspective on remote handling task development, logistics and resource management, as well as command, control and human-machine interface systems. Remote operations require an accurate perception of a dynamic environment, ideally providing the operators with the same unrestricted knowledge of the task scene as would be available if they were actually at the remote work location. Traditional camera based systems suffer from a limited number of viewpoints and also degrade quickly when exposed to high radiation. Virtual Reality and Augmented Reality software offer great assistance. The remote handling system required to maintain a tokamak requires a large number of different and complex pieces of equipment coordinating to perform a large array of tasks. The demands on the operator's skill in performing the tasks can escalate to a point where the efficiency and safety of operations are compromised. An operations guidance system designed to facilitate the planning, development, validation and execution of remote handling procedures is essential. Automatic planning of motion trajectories of remote handling equipment and the remote transfer of heavy loads will be routine and need to be reliable. This paper discusses the solutions developed at JET in these areas and also the trends in management and presentation of operational data as well as command, control and HMI technology development offering the potential to greatly assist remote handling in future fusion machines. (author)

Exposure to alcohol advertisements and teenage alcohol-related problems.

Science.gov (United States)

Grenard, Jerry L; Dent, Clyde W; Stacy, Alan W

2013-02-01

This study used prospective data to test the hypothesis that exposure to alcohol advertising contributes to an increase in underage drinking and that an increase in underage drinking then leads to problems associated with drinking alcohol. A total of 3890 students were surveyed once per year across 4 years from the 7th through the 10th grades. Assessments included several measures of exposure to alcohol advertising, alcohol use, problems related to alcohol use, and a range of covariates, such as age, drinking by peers, drinking by close adults, playing sports, general TV watching, acculturation, parents' jobs, and parents' education. Structural equation modeling of alcohol consumption showed that exposure to alcohol ads and/or liking of those ads in seventh grade were predictive of the latent growth factors for alcohol use (past 30 days and past 6 months) after controlling for covariates. In addition, there was a significant total effect for boys and a significant mediated effect for girls of exposure to alcohol ads and liking of those ads in 7th grade through latent growth factors for alcohol use on alcohol-related problems in 10th grade. Younger adolescents appear to be susceptible to the persuasive messages contained in alcohol commercials broadcast on TV, which sometimes results in a positive affective reaction to the ads. Alcohol ad exposure and the affective reaction to those ads influence some youth to drink more and experience drinking-related problems later in adolescence.

Exposure to Alcohol Advertisements and Teenage Alcohol-Related Problems

Science.gov (United States)

Dent, Clyde W.; Stacy, Alan W.

2013-01-01

OBJECTIVE: This study used prospective data to test the hypothesis that exposure to alcohol advertising contributes to an increase in underage drinking and that an increase in underage drinking then leads to problems associated with drinking alcohol. METHODS: A total of 3890 students were surveyed once per year across 4 years from the 7th through the 10th grades. Assessments included several measures of exposure to alcohol advertising, alcohol use, problems related to alcohol use, and a range of covariates, such as age, drinking by peers, drinking by close adults, playing sports, general TV watching, acculturation, parents’ jobs, and parents’ education. RESULTS: Structural equation modeling of alcohol consumption showed that exposure to alcohol ads and/or liking of those ads in seventh grade were predictive of the latent growth factors for alcohol use (past 30 days and past 6 months) after controlling for covariates. In addition, there was a significant total effect for boys and a significant mediated effect for girls of exposure to alcohol ads and liking of those ads in 7th grade through latent growth factors for alcohol use on alcohol-related problems in 10th grade. CONCLUSIONS: Younger adolescents appear to be susceptible to the persuasive messages contained in alcohol commercials broadcast on TV, which sometimes results in a positive affective reaction to the ads. Alcohol ad exposure and the affective reaction to those ads influence some youth to drink more and experience drinking-related problems later in adolescence. PMID:23359585

Development of nuclear fuel microsphere handling techniques and equipment

International Nuclear Information System (INIS)

Mack, J.E.; Suchomel, R.R.; Angelini, P.

1979-01-01

Considerable progress has been made in the development of microsphere handling techniques and equipment for nuclear applications. Work at Oak Ridge National Laboratory with microspherical fuel forms dates back to the early sixties with the development of the sol-gel process. Since that time a number of equipment items and systems specifically related to microsphere handling and characterization have been identified and developed for eventual application in a remote recycle facility. These include positive and negative pressure transfer systems, samplers, weighers, a blender-dispenser, and automated devices for particle size distribution and crushing strength analysis. The current status of these and other components and systems is discussed

Substance-related health problems during rave parties in The Netherlands (1997-2008.

Directory of Open Access Journals (Sweden)

Jan Krul

Full Text Available The objective of this study was to describe a 12-year (1997-2008 observation of substance-related incidents occurring at rave parties in the Netherlands, including length of visits to first-aid stations, substances used, and severity of the incidents. During rave parties, specifically trained medical and paramedical personnel staffed first aid stations. Visitors were diagnosed and treated, and their data were recorded using standardized methods. During the 12-year period with 249 rave parties involving about 3,800,000 visitors, 27,897 people visited a first aid station, of whom 10,100 reported having a substance-related problem. The mean age of these people was 22.3+/-5.4 years; 52.4% of them were male. Most (66.7% substance-related problems were associated with ecstasy or alcohol use or both. Among 10,100 substance-related cases, 515 required professional medical care, and 16 of these cases were life threatening. People with a substance-related problem stayed 20 min at the first aid station, which was significantly longer than the 5 min that those without a substance-related health problem stayed. These unique data from the Netherlands identify a variety of acute health problems related to the use of alcohol, amphetamines, cannabis, cocaine, ecstasy, and GHB. Although most problems were minor, people using GHB more often required professional medical care those using the other substances. We recommended adherence to harm and risk reduction policy, and the use of first aid stations with specially trained staff for both minor and serious incidents.

Students’ Relational Thinking of Impulsive and Reflective in Solving Mathematical Problem

Science.gov (United States)

Satriawan, M. A.; Budiarto, M. T.; Siswono, T. Y. E.

2018-01-01

This is a descriptive research which qualitatively investigates students’ relational thinking of impulsive and reflective cognitive style in solving mathematical problem. The method used in this research are test and interview. The data analyzed by reducing, presenting and concluding the data. The results of research show that the students’ reflective cognitive style can possibly help to find out important elements in understanding a problem. Reading more than one is useful to identify what is being questioned and write the information which is known, building relation in every element and connecting information with arithmetic operation, connecting between what is being questioned with known information, making equation model to find out the value by using substitution, and building a connection on re-checking, re-reading, and re-counting. The impulsive students’ cognitive style supports important elements in understanding problems, building a connection in every element, connecting information with arithmetic operation, building a relation about a problem comprehensively by connecting between what is being questioned with known information, finding out the unknown value by using arithmetic operation without making any equation model. The result of re-checking problem solving, impulsive student was only reading at glance without re-counting the result of problem solving.

Improvements in or relating to gripping means for handling nuclear reactor fuel assemblies

International Nuclear Information System (INIS)

Batjukov, V.I.; Vjugov, O.N.; Fadeev, A.I.; Shkhian, T.G.

1980-01-01

A gripping means for handling fuel assemblies, the heads of which are internally recessed to receive gripping jaws, forms part of a reactor refuelling machine and is telescopically accommodated within a manipulator tube of the machine. A through hole is provided to allow cooling medium to be passed through the fuel assemblies to remove afterheat when the gripping means is used to transfer assemblies from a reactor core to spent fuel storage sockets. (author)

Students’ Relational Understanding in Quadrilateral Problem Solving Based on Adversity Quotient

Science.gov (United States)

Safitri, A. N.; Juniati, D.; Masriyah

2018-01-01

The type of research is qualitative approach which aims to describe how students’ relational understanding of solving mathematic problem that was seen from Adversity Quotient aspect. Research subjects were three 7th grade students of Junior High School. They were taken by category of Adversity Quotient (AQ) such quitter, camper, and climber. Data collected based on problem solving and interview. The research result showed that (1) at the stage of understanding the problem, the subjects were able to state and write down what is known and asked, and able to mention the concepts associated with the quadrilateral problem. (2) The three subjects devise a plan by linking concepts relating to quadrilateral problems. (3) The three subjects were able to solve the problem. (4) The three subjects were able to look back the answers. The three subjects were able to understand the problem, devise a plan, carry out the plan and look back. However, the quitter and camper subjects have not been able to give a reason for the steps they have taken.

Asthma, guides for diagnostic and handling

International Nuclear Information System (INIS)

Salgado, Carlos E; Caballero A, Andres S; Garcia G, Elizabeth

1999-01-01

The paper defines the asthma, includes topics as diagnostic, handling of the asthma, special situations as asthma and pregnancy, handling of the asthmatic patient's perioperatory and occupational asthma

Handling Data Skew in MapReduce Cluster by Using Partition Tuning

Directory of Open Access Journals (Sweden)

Yufei Gao

2017-01-01

Full Text Available The healthcare industry has generated large amounts of data, and analyzing these has emerged as an important problem in recent years. The MapReduce programming model has been successfully used for big data analytics. However, data skew invariably occurs in big data analytics and seriously affects efficiency. To overcome the data skew problem in MapReduce, we have in the past proposed a data processing algorithm called Partition Tuning-based Skew Handling (PTSH. In comparison with the one-stage partitioning strategy used in the traditional MapReduce model, PTSH uses a two-stage strategy and the partition tuning method to disperse key-value pairs in virtual partitions and recombines each partition in case of data skew. The robustness and efficiency of the proposed algorithm were tested on a wide variety of simulated datasets and real healthcare datasets. The results showed that PTSH algorithm can handle data skew in MapReduce efficiently and improve the performance of MapReduce jobs in comparison with the native Hadoop, Closer, and locality-aware and fairness-aware key partitioning (LEEN. We also found that the time needed for rule extraction can be reduced significantly by adopting the PTSH algorithm, since it is more suitable for association rule mining (ARM on healthcare data.

Parallax handling of image stitching using dominant-plane homography

Science.gov (United States)

Pang, Zhaofeng; Li, Cheng; Zhao, Baojun; Tang, Linbo

2015-10-01

In this paper, we present a novel image stitching method to handle parallax in practical application. For images with significant amount of parallax, the more effective approach is to align roughly and globally the overlapping regions and then apply a seam-cutting method to composite naturally stitched images. It is well known that images can be modeled by various planes result from the projective parallax under non-ideal imaging condition. The dominant-plane homography has important advantages of warping an image globally and avoiding some local distortions. The proposed method primarily addresses large parallax problem through two steps: (1) selecting matching point pairs located on the dominant plane, by clustering matching correspondences and then measuring the cost of each cluster; and (2) in order to obtain a plausible seam, edge maps of overlapped area incorporation arithmetic is adopted to modify the standard seam-cutting method. Furthermore, our approach is demonstrated to achieve reliable performance of handling parallax through a mass of experimental comparisons with state-of-the-art methods.

Vision-related problems among the workers engaged in jewellery manufacturing.

Science.gov (United States)

Salve, Urmi Ravindra

2015-01-01

American Optometric Association defines Computer Vision Syndrome (CVS) as "complex of eye and vision problems related to near work which are experienced during or related to computer use." This happens when visual demand of the tasks exceeds the visual ability of the users. Even though problems were initially attributed to computer-related activities subsequently similar problems are also reported while carrying any near point task. Jewellery manufacturing activities involves precision designs, setting the tiny metals and stones which requires high visual attention and mental concentration and are often near point task. It is therefore expected that the workers engaged in jewellery manufacturing may also experience symptoms like CVS. Keeping the above in mind, this study was taken up (1) To identify the prevalence of symptoms like CVS among the workers of the jewellery manufacturing and compare the same with the workers working at computer workstation and (2) To ascertain whether such symptoms have any permanent vision-related problems. Case control study. The study was carried out in Zaveri Bazaar region and at an IT-enabled organization in Mumbai. The study involved the identification of symptoms of CVS using a questionnaire of Eye Strain Journal, opthalmological check-ups and measurement of Spontaneous Eye Blink rate. The data obtained from the jewellery manufacturing was compared with the data of the subjects engaged in computer work and with the data available in the literature. A comparative inferential statistics was used. Results showed that visual demands of the task carried out in jewellery manufacturing were much higher than that of carried out in computer-related work.

Remote-handled transuranic system assessment appendices. Volume 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

Remote-handled transuranic system assessment appendices. Volume 2

International Nuclear Information System (INIS)

1995-11-01

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives

The Victim Handling Model of Human Trafficking Through Economic Independence

OpenAIRE

Nuraeny, Henny; Utami, Tanti Kirana

2016-01-01

Human Trafficking is a modern trading of human slavery. Human Trafficking is also one of the worst forms of violation of human dignity that results in trauma to the victims. To that end, there should be a comprehensive treatment for victims. The problems that can be studied is whether a model that can be applied in the treatment of victims of trafficking in Cianjur and disseminating technical how models Handling of Victims of Human Trafficking in Cianjur. This study used normative juridical a...

Bidirectional Associations between Peer Relations and Attention Problems from 9 to 16 Years.

Science.gov (United States)

Ji, Linqin; Pan, Bin; Zhang, Wenxin; Zhang, Liang; Chen, Liang; Deater-Deckard, Kirby

2018-05-12

We examined the bidirectional relations between peer relations and attention problems from middle childhood through adolescence. Using data from the Longitudinal Study of Chinese Children and Adolescents (LSCCA, N = 2157, 51.9% male), three key aspects of peer relations (acceptance, rejection, and victimization) were assessed annually from 9 to 16 years of age. Attention problems were assessed at 9 and 15 years. Latent growth modeling indicated that greater attention problems at age 9 were linked with a lower intercept for peer acceptance, and higher intercepts for rejection and victimization. Also, prior lower acceptance and greater rejection and victimization, along with a higher increase over time in rejection and lower decrease over time in victimization, predicted attention problems at age 15. Cross-lagged analysis showed that attention problems were associated with less subsequent peer acceptance and greater subsequent rejection and victimization. Only peer rejection (but neither victimization nor acceptance) predicted more subsequent attention problems. Findings point to bidirectional associations between attention problems and peer relations in the developmental transition across adolescence. Evidence for differential bidirectionality of attention problems with the multiple peer experience (group versus dyadic; good versus bad) emerged, and future replications are needed.

JOYO operation support system 'JOYCAT' based on intelligent alarm handling

International Nuclear Information System (INIS)

Tamaoki, Tetsuo; Yamamoto, Hiroki; Sato, Masuo; Yoshida, Megumu; Kaneko, Tomoko; Terunuma, Seiichi; Takatsuto, Hiroshi; Morimoto, Makoto.

1992-01-01

An operation support system for the experimental fast reactor 'JOYO' was developed based on an intelligent alarm-handling. A specific feature of this system, called JOYCAT (JOYO Consulting and Analyzing Tool), is in its sequential processing structure that a uniform treatment by using design knowledge base is firstly applied for all activated alarms, and an exceptional treatment by using heuristic knowledge base is then applied only for the former results. This enables us to achieve real-time and flexible alarm-handling. The first alarm-handling determines the candidates of causal alarms, important alarms with which the operator should firstly cope, through identifying the cause-consequence relations among alarms based on the design knowledge base in which importance and activating conditions are described for each of 640 alarms in a frame format. The second alarm-handling makes the final judgement with the candidates by using the heuristic knowledge base described as production rules. Then, operation manuals concerning the most important alarms are displayed to operators. JOYCAT has been in commission since September of 1990, after a wide scope of validation tests by using an on-site full-scope training simulator. (author)

Human Performance on the Traveling Salesman and Related Problems: A Review

Science.gov (United States)

MacGregor, James N.; Chu, Yun

2011-01-01

The article provides a review of recent research on human performance on the traveling salesman problem (TSP) and related combinatorial optimization problems. We discuss what combinatorial optimization problems are, why they are important, and why they may be of interest to cognitive scientists. We next describe the main characteristics of human…

Bin-packing problems with load balancing and stability constraints

DEFF Research Database (Denmark)

Trivella, Alessio; Pisinger, David

apper in a wide range of disciplines, including transportation and logistics, computer science, engineering, economics and manufacturing. The problem is well-known to be N P-hard and difficult to solve in practice, especially when dealing with the multi-dimensional cases. Closely connected to the BPP...... realistic constraints related to e.g. load balancing, cargo stability and weight limits, in the multi-dimensional BPP. The BPP poses additional challenges compared to the CLP due to the supplementary objective of minimizing the number of bins. In particular, in section 2 we discuss how to integrate bin......-packing and load balancing of items. The problem has only been considered in the literature in simplified versions, e.g. balancing a single bin or introducing a feasible region for the barycenter. In section 3 we generalize the problem to handle cargo stability and weight constraints....

Commissioning and maintenance experience of in-plant coal handling system of captive power plant at HWP, Manuguru (Paper No. 5.4)

International Nuclear Information System (INIS)

Murugappan, K.; Mohan Rao, A.C.; Sastry, M.S.N.

1992-01-01

For achieving a non-stop generation of power for a minimum period of one year can be a reality only if due importance is given to inplant coal handling system. The paper highlights the major commissioning and maintenance problem faced and corrective action taken for inplant coal handling system of the captive power plant at Heavy Water Plant, Manuguru. (author)

Development of software for handling ship's pharmacy.

Science.gov (United States)

Nittari, Giulio; Peretti, Alessandro; Sibilio, Fabio; Ioannidis, Nicholas; Amenta, Francesco

2016-01-01

Ships are required to carry a given amount of medicinal products and medications depending on the flag and the type of vessel. These medicines are stored in the so called ship's "medicine chest" or more properly - a ship pharmacy. Owing to the progress of medical sciences and to the increase in the mean age of seafarers employed on board ships, the number of pharmaceutical products and medical devices required by regulations to be carried on board ships is increasing. This may make handling of the ship's medicine chest a problem primarily on large ships sailing on intercontinental routes due to the difficulty in identifying the correspondence between medicines obtained abroad with those available at the national market. To minimise these problems a tool named Pharmacy Ship (acronym: PARSI) has been developed. The application PARSI is based on a database containing the information about medicines and medical devices required by different countries regulations. In the first application the system was standardised to comply with the Italian regulations issued on the 1st October, 2015 which entered into force on the 18 January 2016. Thanks to PARSI it was possible to standardize the inventory procedures, facilitate the work of maritime health authorities and make it easier for the crew, not professional in the field, to handle the 'medicine chest' correctly by automating the procedures for medicines management. As far as we know there are no other similar tools available at the moment. The application of the software, as well as the automation of different activities, currently carried out manually, will help manage (qualitatively and quantitatively) the ship's pharmacy. The system developed in this study has proved to be an effective tool which serves to guarantee the compliance of the ship pharmacy with regulations of the flag state in terms of medicinal products and medications. Sharing the system with the Telemedical Maritime Assistance Service may result in

DDOS ATTACK DETECTION SIMULATION AND HANDLING MECHANISM

Directory of Open Access Journals (Sweden)

Ahmad Sanmorino

2013-11-01

Full Text Available In this study we discuss how to handle DDoS attack that coming from the attacker by using detection method and handling mechanism. Detection perform by comparing number of packets and number of flow. Whereas handling mechanism perform by limiting or drop the packets that detected as a DDoS attack. The study begins with simulation on real network, which aims to get the real traffic data. Then, dump traffic data obtained from the simulation used for detection method on our prototype system called DASHM (DDoS Attack Simulation and Handling Mechanism. From the result of experiment that has been conducted, the proposed method successfully detect DDoS attack and handle the incoming packet sent by attacker.

An exploration of undergraduate nursing and physiotherapy students' views regarding education for patient handling.

Science.gov (United States)

Kneafsey, Rosie; Ramsay, Jill; Edwards, Helen; Callaghan, Helen

2012-12-01

To ascertain the views of undergraduate student nurses and physiotherapists regarding their education in patient handling. Musculo-skeletal injuries are an important cause of staff sickness absence and attrition from the nursing profession and are a recognised problem within the physiotherapy profession. Nurses and physiotherapists are at risk of musculo-skeletal injuries as a result of their role in assisting patients with movement. A questionnaire survey was undertaken of undergraduate nursing and physiotherapy students (n = 371) at one university. Most students agreed that university teaching about moving and handling prepared them for clinical practice (64%). Over a third reported that they had never undertaken a written moving and handling risk assessment in clinical practice (38%). Almost half of the sample (40%) admitted undertaking unsafe moving and handling activities. Half (50%) also stated that they would rather 'fit' into the team than challenge unsafe practice. Almost a third (29%) stated that they had begun to experience pain since becoming a student. There were significant differences between nursing and physiotherapy students. Physiotherapy students were more likely to report being supervised when moving and handling and reported being more assertive about adhering to safe practice. The well-being of both nursing and physiotherapy undergraduate students is threatened when students undertake work placements in clinical settings. University-based education in safe patient handling, though important, can be undermined by workplace settings where unsafe practices occur. Collaboration is needed between university educators, managers and practice-based mentors to support students to maintain safe approaches to moving and handling patients. A third of students reported developing pain since becoming a healthcare student. Students entering their professions already injured may leave the workforce owing to poor physical well-being. It is vital that the

Prevalence of work-related health problems among providers of car ...

African Journals Online (AJOL)

Prevalence of work-related health problems among providers of car battery ... the use of personal protective devices and safety measures should be promoted. Keywords: Prevalence, work-related, battery chargers, occupational health, Nigeria ...

From 'troublemakers' to problem solvers

DEFF Research Database (Denmark)

Frandsen, Martin Severin; Pfeiffer Petersen, Lene

2012-01-01

in a disadvantaged neighbourhood in the suburbs of Copenhagen, designed and constructed colourful and imaginative dustbins to handle problems with local littering. The project was successful in creating an increased local awareness of waste management and reducing the amount of litter. However, the more important...

49 CFR 1510.11 - Handling of security service fees.

Science.gov (United States)

2010-10-01

... air carrier holds neither legal nor equitable interest in the security service fees except for the... 49 Transportation 9 2010-10-01 2010-10-01 false Handling of security service fees. 1510.11 Section 1510.11 Transportation Other Regulations Relating to Transportation (Continued) TRANSPORTATION SECURITY...

Changes in Body Mass Index and Stoma Related Problems in the Elderly

Science.gov (United States)

Skeps, Raymond; McMullen, Carmit K.; Wendel, Christopher S.; Bulkley, Joanna; Grant, Marcia; Mohler, Jane; Hornbrook, Mark C.; Krouse, Robert S.; Herrinton, Lisa J.

2012-01-01

Objectives Weight gain can cause retraction of an intestinal stoma, possibly resulting in difficulty with wafer and pouch fit, daily care challenges, and discomfort. This cross-sectional study examined the association between body mass index (BMI) and ostomy-related problems among long-term (>5 years post-diagnosis) colorectal cancer (CRC) survivors. Materials and Methods CRC survivors from three Kaiser Permanente Regions completed a mailed survey. The response rate for those with an ostomy was 53% (283/529). Questions included stoma-related problems and time to conduct daily ostomy care. Poisson regression evaluated associations between report of problems and change in BMI. Our analysis sample included 235 survivors. Results Sample was 76% ≥65 years of age. Since their surgeries, BMI remained stable in 44% (ST), decreased in 20% (DE), and increased in 35% (IN) of survivors. Compared to ST, male IN (RR 2.15 [1.09–4.25]) and female DE (RR 5.06 [1.26–25.0]) were more likely to spend more than 30 minutes per day on stoma care. IN (vs. ST) were more likely to report interference with clothing (RR 1.51 [1.06–2.17]) and other stoma-related problems (RR 2.32 [1.30–4.14]). Survivors who were obese at time of survey were more likely to report interference with clothing (RR 1.88 [1.38–2.56]) and other stoma-related problems (RR 1.68 [1.07–2.65]). Conclusion A change in BMI is associated with ostomy-related problems among long-term CRC survivors. Equipment and care practices may need to be adapted for changes in abdominal shape. Health care providers should caution that a significant increase or decrease in BMI may cause ostomy-related problems. PMID:24071496

Remote handling assessment of attachment concepts for DEMO blanket segments

Energy Technology Data Exchange (ETDEWEB)

Iglesias, Daniel, E-mail: daniel.iglesias@ccfe.ac.uk [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Bastow, Roger; Cooper, Dave; Crowe, Robert; Middleton-Gear, Dave [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Sibois, Romain [VTT, Technical Research Centre of Finland, Industrial Systems, ROViR, Tampere (Finland); Carloni, Dario [Institute of Neutron Physics and Reactor Technology, Karlsruhe Institute of Technology (KIT) (Germany); Vizvary, Zsolt; Crofts, Oliver [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Harman, Jon [EFDA Close Support Unit Garching, Boltzmannstaße 2, D-85748 Garching bei München (Germany); Loving, Antony [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)

2015-10-15

Highlights: • Challenges are identified for the remote handling of blanket segments’ attachments. • Two attachment design approaches are assessed for remote handling (RH) feasibility. • An alternative is proposed, which potentially simplifies and speeds-up RH operations. • Up to three different assemblies are proposed for the remote handling of the attachments. • Proposed integrated design of upper port is compatible with the attachment systems. - Abstract: The replacement strategy of the massive Multi-Module Blanket Segments (MMS) is a key driver in the design of several DEMO systems. These include the blankets themselves, the vacuum vessel (VV) and its ports and the Remote Maintenance System (RMS). Common challenges to any blanket attachment system have been identified, such as the need for applying a preload to the MMS manifold, the effects of the decay heat and several uncertainties related to permanent deformations when removing the blanket segments after service. The WP12 kinematics of the MMS in-vessel transportation was adapted to the requirements of each of the supports during 2013 and 2014 design activities. The RM equipment envisaged for handling attachments and earth connections may be composed of up to three different assemblies. An In-Vessel Mover at the divertor level handles the lower support and earth bonding, and could stabilize the MMS during transportation. A Shield Plug crane with a 6 DoF manipulator operates the upper attachment and earth straps. And a Vertical Maintenance Crane is responsible for the in-vessel MMS transportation and can handle the removable upper support pins. A final proposal is presented which can potentially reduce the number of required systems, at the same time that speeds-up the RMS global operations.

Musculoskeletal injuries resulting from patient handling tasks among hospital workers.

Science.gov (United States)

Pompeii, Lisa A; Lipscomb, Hester J; Schoenfisch, Ashley L; Dement, John M

2009-07-01

The purpose of this study was to evaluate musculoskeletal injuries and disorders resulting from patient handling prior to the implementation of a "minimal manual lift" policy at a large tertiary care medical center. We sought to define the circumstances surrounding patient handling injuries and to identify potential preventive measures. Human resources data were used to define the cohort and their time at work. Workers' compensation records (1997-2003) were utilized to identify work-related musculoskeletal claims, while the workers' description of injury was used to identify those that resulted from patient handling. Adjusted rate ratios were generated using Poisson regression. One-third (n = 876) of all musculoskeletal injuries resulted from patient handling activities. Most (83%) of the injury burden was incurred by inpatient nurses, nurses' aides and radiology technicians, while injury rates were highest for nurses' aides (8.8/100 full-time equivalent, FTEs) and smaller workgroups including emergency medical technicians (10.3/100 FTEs), patient transporters (4.3/100 FTEs), operating room technicians (3.1/100 FTEs), and morgue technicians (2.2/100 FTEs). Forty percent of injuries due to lifting/transferring patients may have been prevented through the use of mechanical lift equipment, while 32% of injuries resulting from repositioning/turning patients, pulling patients up in bed, or catching falling patients may not have been prevented by the use of lift equipment. The use of mechanical lift equipment could significantly reduce the risk of some patient handling injuries but additional interventions need to be considered that address other patient handling tasks. Smaller high-risk workgroups should not be neglected in prevention efforts.

Diagnose and Redesign of the handling and treatment processes of the solid waste in the Hospital Mexico

International Nuclear Information System (INIS)

Campos Arrieta, G.; Navarro Blanco, D

1999-01-01

In the Hospital Mexico a program for the handling of the solid waste was implemented. The program consists on placing recipients, in all the corridors, for each type of waste (recyclable, toxic, dangerous, kitchens). However, this measure doesn't eliminate the risk that the waste represents for the community and the environment. The handling of the solid waste includes the selection or classification, the gathering, the transportation, and the temporary storage. While the treatment consists on the application of procedures that reduce the polluting properties of the waste. The planning of the topic is: To diagnose and to redesign of the handling processes and internal treatment of the hospital solid waste (HSW) in the Hospital Mexico. The contribution of the Industrial Engineering is given in the thematic of redesign of processes; the complementary areas are engineering of the human factor, environmental impact and normalization. The current problem that undergoes the Hospital was defined as follows: The Hospital Mexico cannot assure that the handling and current treatment of the solid waste diminish the risk that they represent to the health of the hospital community and the deterioration of the environment. This problem contains the independent variables such as the handling and current treatment of the solid waste, and the dependent variables such as the risk to the health of the community and deterioration of the environment. Based on the problem, the following hypothesis is established: The current conditions of handling and the lack of internal treatment of the solid waste in the Hospital Mexico, causes that the waste is a risk for the health of the hospital community and the deterioration of the environment. The project was structured in three denominated stages: Diagnose, Design and Validation, which respond to different general and specific objectives. In the stage of diagnose, to determine that the waste generated in the centers of health contain

Disposal and handling of nuclear steam generator chemical cleaning wastes

International Nuclear Information System (INIS)

Larrick, A.P.; Schneidmiller, D.

1978-01-01

A large number of pressurized water nuclear reactor electrical generating plants have experienced a corrosion-related problem with their steam generators known as denting. Denting is a mechanical deformation of the steam generator tubes that occurs at the tube support plates. Corrosion of the tube support plates occurs within the annuli through which the tubes pass and the resulting corrosion oxides, which are larger in volume than the original metal, compress and deform the tubes. In some cases, the induced stresses have been severe enough to cause tube and/or support cracking. The problem was so severe at the Turkey Point and Surrey plants that the tubing is being replaced. For less severe cases, chemical cleaning of the oxides, and other materials which deposit in the annuli from the water, is being considered. A Department of Energy-sponsored program was conducted by Consolidated Edison Co. of New York which identified several suitable cleaning solvents and led to in-plant chemical cleaning pilot demonstrations in the Indian Point Unit 1 steam generators. Current programs to improve the technology are being conducted by the Electric Power Research Institute, and the three PWR NSSS vendors with the assistance of numerous consultants, vendors, and laboratories. These programs are expected to result in more effective, less corrosive solvents. However, after a chemical cleaning is conducted, a large problem still remains- that of disposing of the spent wastes. The paper summarizes some of the methods currently available for handling and disposal of the wastes

Remote handling experiments with the MASCOT IV servomanipulator at JET and prospects of enhancements

International Nuclear Information System (INIS)

Hamilton, D.; Colombi, S.; Galbiati, L.; Haist, B.; Mills, S.; Raimondi, T.

1995-01-01

Ongoing remote handling trials are being performed at JET, using the MASCOT IV servomanipulator, in order to establish the feasibility of proposed remote handling tasks. This promotes the development of appropriate tools and methods, the determination of time scales, and suggests modifications to be incorporated into the final design of the related JET components. (orig.)

Playing-Related Health Problems Among Instrumental Music Students at a University in Malaysia.

Science.gov (United States)

Lonsdale, Karen; Boon, Ong Kuan

2016-09-01

Musicians from a wide range of backgrounds experience playing-related health problems including musculoskeletal disorders, hearing loss, and performance anxiety. Few studies have focused specifically on the health concerns of musicians in Malaysia. This study aimed to investigate playing-related health problems among student musicians at a university in Malaysia as well as their knowledge and awareness of playing-related health problems. Instrumental music students enrolled in undergraduate and post-graduate university music courses (n=98) participated in a self-report online survey which addressed aspects such as educational background, playing experience, knowledge and awareness of musicians' health issues, history of physical problems, lifestyle factors, and prevention and management strategies. Of the total participants, 28.9% reported that they were currently experiencing playing-related pain in a body part, and 46.4% had experienced playing-related pain at some time. More than half (56.7%) felt that they have not received enough information or advice on playing-related health during their current studies. Musicians who experienced playing-related pain, tension, and discomfort reported the main problem sites to be the fingers and hands, arms, neck, and shoulders. The study results demonstrate that Malaysian university music students are affected by similar types of playing-related physical problems as their counterparts around the world. A greater awareness and knowledge of injury prevention and management strategies is needed so that these music students can sustain healthy playing careers.

Safe Handling of Radioisotopes. Health Physics Addendum

Energy Technology Data Exchange (ETDEWEB)

Appleton, G J; Krishnamoorthy, P N

1960-07-15

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains technical information necessary for the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the technical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Safe Handling of Radioisotopes. Health Physics Addendum

International Nuclear Information System (INIS)

Appleton, G.J.; Krishnamoorthy, P.N.

1960-01-01

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains technical information necessary for the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the technical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Building Maintenance in Old Buildings Conservation Approach: An Overview of Related Problems

Directory of Open Access Journals (Sweden)

Brit Kayan

2006-12-01

Full Text Available Building maintenance in conservation of old buildings is one of the approaches applied within the built environment of Malaysia. For instance, it is realised that these old buildings contribute an important significance to our nation's priceless heritage and unique historical development. However, most of these buildings' maintenance is influenced by related problems that affect the overall building conservation approach. Therefore, these old buildings face problems which greatly affect their overall condition and performance: building structure; building appearance and aesthetic; building materials and building character. In most critical situations, there is a greater possibility that we could lose the cultural significance and heritage values of these old buildings through ignoring the related problems. This paper tries to identify the related problems, reveal the findings and discuss suitable approaches to conserving these old buildings.

Test of fuel handling machine for Monju in sodium

International Nuclear Information System (INIS)

Ishii, Yoichiro; Masuda, Yoichi; Kataoka, Hajime

1980-01-01

Various types of fuel handling machines were studied, and under-the-plug method of fuel exchange and the fuel handling machine of single turning plug, fixed arm type were selected for the prototype reactor ''Monju'', because the turning plug is relatively small, and the rate of operation, safety, operational ability, maintainability and reliability required for the reactor are satisfied, moreover, the extrapolation to the demonstration reactor was considered. Attention must be paid to the points that the fuel handling machine is very long and invisible from outside, and the smooth operation and endurance in sodium are required for it. The full mock-up testing facility of single turning plug, fixed arm type was installed in 1974, and the full mock-up test has been carried out since 1975 in Oarai. Fuel exchange is carried out at about 6 months intervals in Monju, and about 20 to 30% of core and blanket fuels are exchanged for about one month period. The functions required for the fuel handling machine for Monju, the outline of the testing facility, the schedule of the testing, the items of testing and the results, and the matters to be specially written are described. The full mock-up test in sodium has been carried out for 5 years, and the functions and the endurance have been proved sufficiently. (Kako, I.)

The Fertility Problem Inventory: measuring perceived infertility-related stress.

Science.gov (United States)

Newton, C R; Sherrard, W; Glavac, I

1999-07-01

To develop a reliable, valid instrument to evaluate perceived infertility-related stress. Prospective study. University-affiliated teaching hospital. Consecutively referred patients (1,153 women and 1,149 men) seen for infertility treatment. None. Participants' infertility-related stress was assessed by written questionnaire using the Fertility Problem Inventory. Current levels of anxiety, depression, and marital satisfaction also were determined. Women described greater global stress than men and higher specific stress in terms of social concerns, sexual concerns, and need for parenthood. Both men and women facing male infertility reported higher global stress and more social and sexual concerns than men and women experiencing female infertility. Social, sexual, and relationship concerns related to infertility were more effective predictors of depression and marital dissatisfaction than expressed needs for parenthood or attitudes toward child-free living. The Fertility Problem Inventory provides a reliable measure of perceived infertility-related stress and specific information on five separate domains of patient concern. Patterns of infertility-related stress differed depending on gender, fertility history, and infertility diagnosis. Among patients receiving treatment, social, sexual, and relationship concerns appear central to current distress. Counseling interventions that target these domains appear likely to offer maximal therapeutic benefit.

Prevalence of drug-related problems in self-medication in Danish community pharmacies

Directory of Open Access Journals (Sweden)

Bente Frøkjær

2012-01-01

Full Text Available Background: Drug-related problems are known to be a major problem associated with pharmacotherapy. A broad range of studies, mainly in the area of prescription-only medicines, supports this fact. Only a few studies have evaluated drug-related problems with over-the-counter medicine and the role of community pharmacies in this. Purpose: To quantify drug-related problems in self-medication (use of over-the-counter medicine identified by community pharmacies in Denmark and to document the interventions by pharmacy staff in relation to the identified drug-related problems. Method: A descriptive study mapping drug-related problems in self-medication registered at the counter at a selected number of Danish community pharmacies. Results: Data for 3,868 consecutive customers with requests for over-the-counter (OTC medicines were registered at 39 community pharmacies. The pharmacies registered a total number of 4,324 OTC medicines requests, illustrating that a customer requested 1.1 OTC medicines on average. Drug-related problems (DRPs were identified for 813 customers, equivalent to DRPs for 21.0 % of all customers, presenting symptoms or requesting OTC medicines, and for 20 % of all over-the-counter medicines requests. 1,239 DRPs were registered, corresponding to an average of 1.5 DRPs per customer requesting OTC medicines. Community pharmacies estimated that they solved or partly solved 76.2 % of the detected DRPs; 73 % were solved without involving a general practitioner. Conclusions: DRPs were identified for 21.0 % of the pharmacy customers presenting a symptom or asking for an OTC medicine. The community pharmacy counselled the customers with DRPs more thoroughly than other customers by giving 2.4 pieces of professional advice, compared to an average of 2.1 to customers in general. It is not possible to determine the magnitude of the safety risk involved. Based on the most frequent categories of DRPs, there were risks of insufficient effect

Prevalence of drug-related problems in self-medication in Danish community pharmacies

Directory of Open Access Journals (Sweden)

Charlotte Rossing

2012-01-01

Full Text Available Background: Drug-related problems are known to be a major problem associated with pharmacotherapy. A broad range of studies, mainly in the area of prescription-only medicines, supports this fact. Only a few studies have evaluated drug-related problems with over-the-counter medicine and the role of community pharmacies in this.Purpose: To quantify drug-related problems in self-medication (use of over-the-counter medicine identified by community pharmacies in Denmark and to document the interventions by pharmacy staff in relation to the identified drug-related problems.Method: A descriptive study mapping drug-related problems in self-medication registered at the counter at a selected number of Danish community pharmacies.Results: Data for 3,868 consecutive customers with requests for over-the-counter (OTC medicines were registered at 39 community pharmacies. The pharmacies registered a total number of 4,324 OTC medicines requests, illustrating that a customer requested 1.1 OTC medicines on average. Drug-related problems (DRPs were identified for 813 customers, equivalent to DRPs for 21.0 % of all customers, presenting symptoms or requesting OTC medicines, and for 20 % of all over-the-counter medicines requests. 1,239 DRPs were registered, corresponding to an average of 1.5 DRPs per customer requesting OTC medicines.Community pharmacies estimated that they solved or partly solved 76.2 % of the detected DRPs; 73 % were solved without involving a general practitioner.Conclusions: DRPs were identified for 21.0 % of the pharmacy customers presenting a symptom or asking for an OTC medicine. The community pharmacy counselled the customers with DRPs more thoroughly than other customers by giving 2.4 pieces of professional advice, compared to an average of 2.1 to customers in general. It is not possible to determine the magnitude of the safety risk involved. Based on the most frequent categories of DRPs, there were risks of insufficient effect, unintended

Diagnostic interface problems on TFTR

International Nuclear Information System (INIS)

Goldfarb, S.

1977-01-01

Diagnostic equipment on TFTR has functional interfaces with many machine systems. Salient requirements include plasma access, environmental resistance to thermal, magnetic and radiation effects, automated data acquisition and controls, remote handling and personnel safety. Problems imposed by these requirements and the solutions being considered are described

HMSRP Hawaiian Monk Seal Handling Data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

Expanded Occupational Safety and Health Administration 300 log as metric for bariatric patient-handling staff injuries.

Science.gov (United States)

Randall, Stephen B; Pories, Walter J; Pearson, Amy; Drake, Daniel J

2009-01-01

Mobilization of morbidly obese patients poses significant physical challenges to healthcare providers. The purpose of this study was to examine the staff injuries associated with the patient handling of the obese, to describe a process for identifying injuries associated with their mobilization, and to report on the need for safer bariatric patient handling. We performed our study at a 761-bed, level 1 trauma center affiliated with a U.S. medical school. The hospital's Occupational Safety and Health Administration (OSHA) 300 log was expanded to the "E-OSHA 300 log" to specifically identify injuries the staff attributed to bariatric patient handling. The 2007 E-OSHA 300 log was analyzed to identify and describe the frequency, severity, and nature of bariatric versus nonbariatric patient handling injuries. The analyses revealed that during 2007, although patients with a body mass index of > or =35 kg/m(2) constituted patient population, 29.8% of staff injuries related to patient handling were linked to working with a bariatric patient. Bariatric patient handling accounted for 27.9% of all lost workdays and 37.2% of all restricted workdays associated with patient handling. Registered nurses and nursing assistants accounted for 80% of the injuries related to bariatric patient handling. Turning and repositioning the patient in bed accounted for 31% of the injuries incurred. The E-OSHA 300 log narratives revealed that staff injuries associated with obese and nonobese patient handling were usually performed using biomechanics and not equipment. Manual mobilization of morbidly obese patients increases the risk of caregiver injury. A tracking indicator on the OSHA 300 logs for staff injury linked to a bariatric patient would provide the ability to compare obese and nonobese patient handling injuries. The E-OSHA 300 log provides a method to identify the frequency, severity, and nature of caregiver injury during mobilization of the obese. Understanding the heightened risk of

Routine post-weaning handling of rats prevents isolation rearing-induced deficit in prepulse inhibition

Directory of Open Access Journals (Sweden)

M.L.N.M. Rosa

2005-11-01

Full Text Available Rats reared under isolation conditions from weaning present a number of behavioral changes compared to animals reared under social conditions (group housing. These changes include deficits in prepulse inhibition (PPI of the startle reflex to a loud sound. PPI refers to the reduction of the magnitude of the startle reflex when a relatively weak stimulus (the prepulse precedes by an appropriate time interval the intense startle-elicing stimulus (the pulse. PPI is useful for studying sensorimotor integration. The present study evaluated the effect of handling on the impairment of PPI induced by isolation-rearing. Male Wistar rats (N = 11-15/group were housed in groups (5 per cage and handled three times a week or isolated (housed individually since weaning (21 days for 10 weeks when they reach approximately 150 g. The isolated rats were divided into "minimally handled" animals (handled once a week for cleaning purposes only or "handled" animals (handled three times a week. This handling consisted of grasping the rat by the tail and moving it to a clean cage (approximately 5 s. A statistically significant reduction (52% in the PPI test was found only in the isolated group with minimal handling while no difference was seen between grouped animals and isolated handled animals. These results indicate that isolation rearing causes disruption in the PPI at adult age, which serves as an index of attention deficit. This change in the sensory processing of information induced by post-weaning isolation can be prevented by handling during the development of the animal.

Routine post-weaning handling of rats prevents isolation rearing-induced deficit in prepulse inhibition.

Science.gov (United States)

Rosa, M L N M; Silva, R C B; Moura-de-Carvalho, F T; Brandão, M L; Guimarães, F S; Del Bel, E A

2005-11-01

Rats reared under isolation conditions from weaning present a number of behavioral changes compared to animals reared under social conditions (group housing). These changes include deficits in prepulse inhibition (PPI) of the startle reflex to a loud sound. PPI refers to the reduction of the magnitude of the startle reflex when a relatively weak stimulus (the prepulse) precedes by an appropriate time interval the intense startle-elicing stimulus (the pulse). PPI is useful for studying sensorimotor integration. The present study evaluated the effect of handling on the impairment of PPI induced by isolation-rearing. Male Wistar rats (N = 11-15/group) were housed in groups (5 per cage and handled three times a week) or isolated (housed individually) since weaning (21 days) for 10 weeks when they reach approximately 150 g. The isolated rats were divided into "minimally handled" animals (handled once a week for cleaning purposes only) or "handled" animals (handled three times a week). This handling consisted of grasping the rat by the tail and moving it to a clean cage (approximately 5 s). A statistically significant reduction (52%) in the PPI test was found only in the isolated group with minimal handling while no difference was seen between grouped animals and isolated handled animals. These results indicate that isolation rearing causes disruption in the PPI at adult age, which serves as an index of attention deficit. This change in the sensory processing of information induced by post-weaning isolation can be prevented by handling during the development of the animal.

Applying the intention-to-treat principle in practice: Guidance on handling randomisation errors.

Science.gov (United States)

Yelland, Lisa N; Sullivan, Thomas R; Voysey, Merryn; Lee, Katherine J; Cook, Jonathan A; Forbes, Andrew B

2015-08-01

The intention-to-treat principle states that all randomised participants should be analysed in their randomised group. The implications of this principle are widely discussed in relation to the analysis, but have received limited attention in the context of handling errors that occur during the randomisation process. The aims of this article are to (1) demonstrate the potential pitfalls of attempting to correct randomisation errors and (2) provide guidance on handling common randomisation errors when they are discovered that maintains the goals of the intention-to-treat principle. The potential pitfalls of attempting to correct randomisation errors are demonstrated and guidance on handling common errors is provided, using examples from our own experiences. We illustrate the problems that can occur when attempts are made to correct randomisation errors and argue that documenting, rather than correcting these errors, is most consistent with the intention-to-treat principle. When a participant is randomised using incorrect baseline information, we recommend accepting the randomisation but recording the correct baseline data. If ineligible participants are inadvertently randomised, we advocate keeping them in the trial and collecting all relevant data but seeking clinical input to determine their appropriate course of management, unless they can be excluded in an objective and unbiased manner. When multiple randomisations are performed in error for the same participant, we suggest retaining the initial randomisation and either disregarding the second randomisation if only one set of data will be obtained for the participant, or retaining the second randomisation otherwise. When participants are issued the incorrect treatment at the time of randomisation, we propose documenting the treatment received and seeking clinical input regarding the ongoing treatment of the participant. Randomisation errors are almost inevitable and should be reported in trial publications. The

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel: I. Principles and some general algorithms.

Science.gov (United States)

Langenbucher, Frieder

2002-01-01

Most computations in the field of in vitro/in vivo correlations can be handled directly by Excel worksheets, without the need for specialized software. Following a summary of Excel features, applications are illustrated for numerical computation of AUC and Mean, Wagner-Nelson and Loo-Riegelman absorption plots, and polyexponential curve fitting.

Developing Tool Support for Problem Diagrams with CPN and VDM++

DEFF Research Database (Denmark)

Tjell, Simon; Lassen, Kristian Bisgaard

2008-01-01

In this paper, we describe ongoing work on the development of tool support for formal description of domains found in Problem Diagrams. The purpose of the tool is to handle the generation of a CPN model based on a collection of Problem Diagrams. The Problem Diagrams are used for representing the ...

Steam coal processing technology: handling, high-order processing, COM, meth-coal

Energy Technology Data Exchange (ETDEWEB)

Kamata, H.; Onodera, J.

1982-01-01

Topics covered include: various handling techologies (overland and marine transport, storage, water removal, drying, comminution and sizing); various coal processing technologies (gravity concentration, magnetic separation, multi-stage flotation, liquid-phase pelletizing, chemical processing); production methods for coal-oil mixtures (COM), their physical properties, stability, storage, transport, advantages, plus recent trends in research and development; production of coal-methanol slurry (meth-coal), its stability, storage, transport, utilization and environmental problems, plus latest trends in research and development. (In Japanese)

Processing of Words Related to the Demands of a Previously Solved Problem

Directory of Open Access Journals (Sweden)

Kowalczyk Marek

2014-06-01

Full Text Available Earlier research by the author brought about findings suggesting that people in a special way process words related to demands of a problem they previously solved, even when they do not consciously notice this relationship. The findings concerned interference in the task in which the words appeared, a shift in affective responses to them that depended on sex of the participants, and impaired memory of the words. The aim of this study was to replicate these effects and to find out whether they are related to working memory (WM span of the participants, taken as a measure of the individual’s ability to control attention. Participants in the experimental group solved a divergent problem, then performed an ostensibly unrelated speeded affective classification task concerning each of a series of nouns, and then performed an unexpected cued recall task for the nouns. Afterwards, a task measuring WM span was administered. In the control group there was no problem-solving phase. Response latencies for words immediately following problem-related words in the classification task were longer in the experimental than in the control group, but there was no relationship between this effect and WM span. Solving the problem, in interaction with sex of the participants and, independently, with their WM span, influenced affective responses to problem-related words. Recall of these words, however, was not impaired in the experimental group.

Tasks related to increase of RA reactor exploitation and experimental potential, 03. Crane for handling the vertical experimental channels of the RA reactor - design project

International Nuclear Information System (INIS)

Pavicevic, M.

1963-07-01

Within the work related to improvement of experimental potential of the RA reactor, this document describes the design project of the new crane for handling the vertical experimental channels of the RA reactor, engineering drawings of the crane main elements, mechanical part, design project of the electrical part of the crane and cost estimation

Off-line programming and simulation in handling nuclear components

International Nuclear Information System (INIS)

Baker, C.P.

1993-10-01

IGRIP was used to create a simulation of the robotic workcell design for handling components at the PANTEX nuclear arms facility. This initial simulation identified problems with the customer's proposed worker layout, and allowed a correction to be proposed. Refinement of the IGRIP simulation allowed the design and construction of a workcell mock-up and accurate off-line programming of the system. IGRIP's off-line programming capabilities are being used to develop the motion control code for the workcell. PNLs success in this area suggests that simulation and off-line programming may be valuable tools for developing robotics in some automation resistant industries

Welding method by remote handling

International Nuclear Information System (INIS)

Hashinokuchi, Minoru.

1994-01-01

Water is charged into a pit (or a water reservoir) and an article to be welded is placed on a support in the pit by remote handling. A steel plate is disposed so as to cover the article to be welded by remote handling. The welding device is positioned to the portion to be welded and fixed in a state where the article to be welded is shielded from radiation by water and the steel plate. Water in the pit is drained till the portion to be welded is exposed to the atmosphere. Then, welding is conducted. After completion of the welding, water is charged again to the pit and the welding device and fixing jigs are decomposed in a state where the article to be welded is shielded again from radiation by water and the steel plate. Subsequently, the steel plate is removed by remote handling. Then, the article to be welded is returned from the pit to a temporary placing pool by remote handling. This can reduce operator's exposure. Further, since the amount of the shielding materials can be minimized, the amount of radioactive wastes can be decreased. (I.N.)

Sheep pre-slaughter handling practices and their effect on meat quality

Directory of Open Access Journals (Sweden)

Francisco Gerardo Ríos-Rincón

2013-06-01

Full Text Available Aspects related to ovine production systems in Mexico were revisited, as well as the relationship between the transport and the ante-mortem handling with ovine welfare and pre slaughter operations. Animals stress evaluation is fundamental importance for this process, where the observation of animal behavior is basic to determinate and understands the scope of this biological phenomenon. Finally, we make reference to two of the main meat quality attributes that can be affected as consequence of non-appropriated handling practice and operations that implies the un-knowledge of animal conduct. The conclusion is that the handling practices previous to slaughter of ovine specie had a considerable influence on carcass quality. In Mexico is important to focus the cattle research on the productive systems improvement in consideration to animal welfare in the different productive process steps.

Electrophysiological properties and calcium handling of embryonic stem cell-derived cardiomyocytes

Directory of Open Access Journals (Sweden)

Jae Boum Youm

2016-03-01

Full Text Available Embryonic stem cell-derived cardiomyocytes (ESC-CMs hold great interest in many fields of research including clinical applications such as stem cell and gene therapy for cardiac repair or regeneration. ESC-CMs are also used as a platform tool for pharmacological tests or for investigations of cardiac remodeling. ESC-CMs have many different aspects of morphology, electrophysiology, calcium handling, and bioenergetics compared with adult cardiomyocytes. They are immature in morphology, similar to sinus nodal-like in the electrophysiology, higher contribution of trans-sarcolemmal Ca2+ influx to Ca2+ handling, and higher dependence on anaerobic glycolysis. Here, I review a detailed electrophysiology and Ca2+ handling features of ESC-CMs during differentiation into adult cardiomyocytes to gain insights into how all the developmental changes are related to each other to display cardinal features of developing cardiomyocytes.

Distributed and parallel approach for handle and perform huge datasets

Science.gov (United States)

Konopko, Joanna

2015-12-01

Big Data refers to the dynamic, large and disparate volumes of data comes from many different sources (tools, machines, sensors, mobile devices) uncorrelated with each others. It requires new, innovative and scalable technology to collect, host and analytically process the vast amount of data. Proper architecture of the system that perform huge data sets is needed. In this paper, the comparison of distributed and parallel system architecture is presented on the example of MapReduce (MR) Hadoop platform and parallel database platform (DBMS). This paper also analyzes the problem of performing and handling valuable information from petabytes of data. The both paradigms: MapReduce and parallel DBMS are described and compared. The hybrid architecture approach is also proposed and could be used to solve the analyzed problem of storing and processing Big Data.

Civilsamfundets ABC: H for Handling

DEFF Research Database (Denmark)

Lund, Anker Brink; Meyer, Gitte

2015-01-01

Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling.......Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling....

The technique on handling radiation

International Nuclear Information System (INIS)

1997-11-01

This book describes measurement of radiation and handling radiation. The first part deals with measurement of radiation. The contents of this part are characteristic on measurement technique of radiation, radiation detector, measurement of energy spectrum, measurement of radioactivity, measurement for a level of radiation and county's statistics on radiation. The second parts explains handling radiation with treating of sealed radioisotope, treating unsealed source and radiation shield.

Pharmacist intervention in drug-related problems for patients with ...

African Journals Online (AJOL)

Trop J Pharm Res, October 2016; 15(10): 2275. Tropical Journal of ... medication errors in irrational drug use, while patient adherence ..... Drug-related problems identified from geriatric medication safety ... Ann. Pharmacother. 2005; 39:1423-.

Anxiety Sensitivity and Sleep-Related Problems in Anxious Youth

Science.gov (United States)

Weiner, Courtney L.; Elkins, Meredith; Pincus, Donna; Comer, Jonathan

2015-01-01

Anxiety disorders constitute the most common mental health disturbance experienced by youth. Sleep-related problems (SRPs) are highly prevalent among anxious youth and encompass a variety of problems including nighttime fears, insomnia, and refusal to sleep alone. Given that chronic sleep disturbance is associated with a range of behavioral and physical problems in youth and predicts future psychopathology, it is important to elucidate the nature of SRPs in anxious youth. The present study investigated the relationship between sleep problems and anxiety sensitivity in a sample of 101 anxious youth, ages 6–17. Heightened anxiety sensitivity significantly predicted prolonged sleep onset latency across the sample, even after accounting for severity of anxiety, depression, and age. Results support previous research indicating that SRPs are common among anxious youth and suggest that anxiety sensitivity may play a particularly important role in sleep onset latency. PMID:25863826

Reasons of the problems that academicians experience in management of teaching and learning process

Directory of Open Access Journals (Sweden)

Süleyman Göksoy

2018-04-01

Full Text Available The present research aims to examine the problems that academicians experience in management of teaching-learning process, to reveal the reasons of the problems and to develop solution suggestions. Case study design of qualitative research methods was used in this research and it includes 41 volunteer academicians. Structured interview form was used in data collection and the data were analyzed with content analysis. It was found that most of the problems academicians experience in management of teaching-learning process were related to students. They also had problems with classroom/course management. In management of teaching-learning processes of the academicians, problems were related to students, physical infrastructure, educational system and society/environment. It can be asserted that most of the problems can be solved if their reasons are determined and handled. Also it is suggested that incoming academicians who are new to academic life need to follow the regulations that includes student discipline regulations and the students need to be informed about the negative behaviors and their consequences at the beginning of the term.

Terrorism-related trauma in Africa, an increasing problem.

Science.gov (United States)

Alfa-Wali, Maryam; Sritharan, Kaji; Mehes, Mira; Abdullah, Fizan; Rasheed, Shahnawaz

2015-06-01

Global terrorist activities have increased significantly over the past decade. The impact of terrorism-related trauma on the health of individuals in low- and middle-income countries is under-reported. Trauma management in African countries in particular is uncoordinated, with little or no infrastructure to cater for emergency surgical needs. This article highlights the need for education, training and research to mitigate the problems related to terrorism and surgical public health. Copyright © 2014 Ministry of Health, Saudi Arabia. Published by Elsevier Ltd. All rights reserved.

Assessment of work-related accidents associated with waste handling in Belo Horizonte (Brazil).

Science.gov (United States)

Mol, Marcos Pg; Pereira, Amanda F; Greco, Dirceu B; Cairncross, Sandy; Heller, Leo

2017-10-01

As more urban solid waste is generated, managing it becomes ever more challenging and the potential impacts on the environment and human health also become greater. Handling waste - including collection, treatment and final disposal - entails risks of work accidents. This article assesses the perception of waste management workers regarding work-related accidents in domestic and health service contexts in Belo Horizonte, Brazil. These perceptions are compared with national data from the Ministry of Social Security on accidents involving workers in solid waste management. A high proportion of accidents involves cuts and puncture injuries; 53.9% among workers exposed to domestic waste and 75% among those exposed to health service waste. Muscular lesions and fractures accounted for 25.7% and 12.5% of accidents, respectively. Data from the Ministry of Social Security diverge from the local survey results, presumably owing to under-reporting, which is frequent in this sector. Greater commitment is needed from managers and supervisory entities to ensure that effective measures are taken to protect workers' health and quality of life. Moreover, workers should defend their right to demand an accurate registry of accidents to complement monitoring performed by health professionals trained in risk identification. This would contribute to the improved recovery of injured workers and would require managers in waste management to prepare effective preventive action.

Statistics and Corporate Environmental Management: Relations and Problems

DEFF Research Database (Denmark)

Madsen, Henning; Ulhøi, John Parm

1997-01-01

Statistical methods have long been used to analyse the macroeconomic consequences of environmentally damaging activities, political actions to control, prevent, or reduce these damages, and environmental problems in the natural environment. Up to now, however, they have had a limited and not very...... in the external environment. The nature and extent of the practical use of quantitative techniques in corporate environmental management systems is discussed on the basis of a number of company surveys in four European countries.......Statistical methods have long been used to analyse the macroeconomic consequences of environmentally damaging activities, political actions to control, prevent, or reduce these damages, and environmental problems in the natural environment. Up to now, however, they have had a limited and not very...... specific use in corporate environmental management systems. This paper will address some of the special problems related to the use of statistical techniques in corporate environmental management systems. One important aspect of this is the interaction of internal decisions and activities with conditions...

Handling Pyrophoric Reagents

Energy Technology Data Exchange (ETDEWEB)

Alnajjar, Mikhail S.; Haynie, Todd O.

2009-08-14

Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

Usefulness of problem tree, objective tree and logical framework ...

African Journals Online (AJOL)

The discussion has led to the conclusion that higher learning institutions are not adequately preparing graduates to face the increasing labor market demands in terms of skills and competitiveness. Having outlined the roots of the problem through the problem tree, the researchers proposed potential strategies to handle the ...

Manual materials handling: the cause of over-exertion injury and illness in industry.

Science.gov (United States)

Chaffin, D B

1979-01-01

It is reported from various sources that overexertion due to lifting, pushing, pulling, and carrying objects accounts for about 27 percent of all compensable industrial injury and illness in the United States. Resulting strain/sprain injuries account for over 50 percent of workmen's compensation clams in many industries. Almont two-thirds of these involve back pain, with reported compensation and medical payments totaling well over one billion dollars annually in the U.S. An estimated 300,000 plus workers will be affected each year, 5 to 10 percent of whom will have a permanent disability and often will be unemployable. This paper attempts to describe four basic approaches used to study this occupational health problem. In so doing, a concerted effort is made to identifiy the gaps in knowledge which need to be more fully researched. The approaches utilized to understand and control the hazards of manual materials handling are: 1) epidemiological studies of job and worker attributes to identify those that individually and in combination cause musculoskeletal incidents, 2) psychophysical studies to ascertain the volitional tolerance of workers to the stress mitigated by manual materials-handling activities, 3) biomechanical studies of the musculoskeletal system during common exertions required in manual materials-handling activities, and 4) physiological studies of the strain imposed on the cardiovascular system during repeated load-handling activities. The state of knowledge from each of these approaches is summarized briefly, and a case is made that much research is still needed to substantiate the necessary controls to lessen the economic burden and human suffering associated with manual materials-handling acts in industry.

Bucket-handle meniscal tears of the knee: sensitivity and specificity of MRI signs

International Nuclear Information System (INIS)

Dorsay, Theodore A.; Helms, Clyde A.

2003-01-01

To determine the sensitivity and specificity of reported MRI signs in the evaluation of bucket-handle tears of the knee.Design and patients A retrospective analysis of 71 knee MR examinations that were read as displaying evidence of a bucket-handle or ''bucket-handle type'' tear was performed. We evaluated for the presence or absence of the absent bow tie sign, the coronal truncation sign, the double posterior cruciate ligament (PCL) sign, the anterior flipped fragment sign, and a fragment displaced into the intercondylar notch. Sensitivity and specificity were calculated relative to the gold standard of arthroscopy. Forty-three of 71 cases were surgically proven as bucket-handle tears. The absent bow tie sign demonstrated a sensitivity of 88.4%. The presence of at least one of the displaced fragment signs had a sensitivity of 90.7%. A finding of both the absent bow tie sign and one of the displaced fragment signs demonstrated a specificity of 85.7%. The double PCL sign demonstrated a specificity of 100%. The anterior flipped meniscus sign had a specificity of 89.7%. Bucket-handle tears of the menisci, reported in about 10% of most large series, have been described by several signs with MRI. This report gives the sensitivity and specificity of MRI for bucket-handle tears using each of these signs independently and in combination. MRI is shown to be very accurate for diagnosing bucket-handle tears when two or more of these signs coexist. (orig.)

ATA diagnostic data handling system: an overview

International Nuclear Information System (INIS)

Chambers, F.W.; Kallman, J.; McDonald, J.; Slominski, M.

1984-01-01

The functions to be performed by the ATA diagnostic data handling system are discussed. The capabilities of the present data acquisition system (System 0) are presented. The goals for the next generation acquisition system (System 1), currently under design, are discussed. Facilities on the Octopus system for data handling are reviewed. Finally, we discuss what has been learned about diagnostics and computer based data handling during the past year

[Handling the cases of school failure in an educational institute in Zaghouan].

Science.gov (United States)

Abdelkafi Koubaa, Afifa; Bouslama, Samira; Bel Abed, Najet; Dahmen, Hayet; Mira Gabsi, Zvine; Gabsi, Abdallah; Ouerfelli, Nabil; Mabaouj, Mohamed Taher; Bachouche, Imen

2011-10-01

To assess the main reasons for the school failure in a school in Zaghouan, how to handle these issues, to evaluate the work of the school social office. A retrospective study included 86 failure cases in a school in Zaghouan, handled by the school social office for three years (2004 - 2007). He have detected the principals causes of school failure, detected by the educational staff or by the listening office. The causes of failure are mainly social (46%) as family problems and low income. These families received financial aids and free treatment cards. Discussions have been made with the parents in order to make them more conscious. The pedagogical reasons (28%) however are usually relationship' problems between the student and his teacher or the student and the administration, the three subjects were informed so that attitudes could be changed in the purpose of helping the student. Twelve students (14%) have a psychological case, depression and over worrying, led in some cases to addiction.These cases were diagnosed and transferred to specialized clinics.Sense and chronic diseases (12%), are considered as health reasons for school failure and caused several absences in the school. The school physicist took care of these cases by handling them medical guidance cards while observing the diagnose progress. As school results, 56 cases turned satisfaisant which is 65 % of all cases. The school failure became a priority of the "School Health" institute. That puss to create the school social program, his aim is protecting the students from all dangers, early school leaving and social disintegration, and delinquency. Thus, all parts must be responsible for the school failure, teachers, parents, students,psychiatrists and physicists, as well as introducing the social school work and listening offices and missions to the parents, students and teachers in order to guarantee the success of the operations.

Handling of computational in vitro/in vivo correlation problems by Microsoft Excel II. Distribution functions and moments.

Science.gov (United States)

Langenbucher, Frieder

2003-01-01

MS Excel is a useful tool to handle in vitro/in vivo correlation (IVIVC) distribution functions, with emphasis on the Weibull and the biexponential distribution, which are most useful for the presentation of cumulative profiles, e.g. release in vitro or urinary excretion in vivo, and differential profiles such as the plasma response in vivo. The discussion includes moments (AUC and mean) as summarizing statistics, and data-fitting algorithms for parameter estimation.

An efficient chaos embedded hybrid approach for hydro-thermal unit commitment problem

International Nuclear Information System (INIS)

Yuan, Xiaohui; Ji, Bin; Yuan, Yanbin; Ikram, Rana M.; Zhang, Xiaopan; Huang, Yuehua

2015-01-01

Highlights: • Thermal unit commitment is considered in hydrothermal generation scheduling (SHTGS). • Two newly proposed promising optimization algorithms are combined to solving SHTGS. • The proposed method is enhanced by integrating a chaotic local search strategy. • Heuristic search strategies are applied to handle the constraints of the SHTGS. • The results verify the proposed method is feasible and efficient for handling SHTGS. - Abstract: This paper establishes a model to deal with the short-term hydrothermal generation scheduling (SHTGS) problem. The problem is composed of three interconnected parts: short-term hydrothermal coordination, thermal unit commitment and economic load dispatch. An efficient hybrid method composed of chaotic backtracking search optimization algorithm and binary charged system search algorithm (CBSA–BCSS) is proposed to solve this problem. In order to analyze the effect of the chaotic map on the performance of the method, three different chaotic maps are adopted to integrate into the proposed method and the corresponding consequences are achieved. Furthermore, efficient heuristic search strategies are adopted to handle with the complicated constraints of the SHTGS system. Finally, a hydrothermal unit commitment system is utilized to verify the feasibility and effectiveness of the proposed method. The results demonstrate the efficiency of the hybrid optimization method and the appropriation of the constraint handling strategies. The comparison of the solutions achieved by different methods shows that the proposed method has higher efficiency in terms of solving SHTGS problem

Shilajit: A panacea for high-altitude problems.

Science.gov (United States)

Meena, Harsahay; Pandey, H K; Arya, M C; Ahmed, Zakwan

2010-01-01

High altitude problems like hypoxia, acute mountain sickness, high altitude cerebral edema, pulmonary edema, insomnia, tiredness, lethargy, lack of appetite, body pain, dementia, and depression may occur when a person or a soldier residing in a lower altitude ascends to high-altitude areas. These problems arise due to low atmospheric pressure, severe cold, high intensity of solar radiation, high wind velocity, and very high fluctuation of day and night temperatures in these regions. These problems may escalate rapidly and may sometimes become life-threatening. Shilajit is a herbomineral drug which is pale-brown to blackish-brown, is composed of a gummy exudate that oozes from the rocks of the Himalayas in the summer months. It contains humus, organic plant materials, and fulvic acid as the main carrier molecules. It actively takes part in the transportation of nutrients into deep tissues and helps to overcome tiredness, lethargy, and chronic fatigue. Shilajit improves the ability to handle high altitudinal stresses and stimulates the immune system. Thus, Shilajit can be given as a supplement to people ascending to high-altitude areas so that it can act as a "health rejuvenator" and help to overcome high-altitude related problems.

The remote handling systems for ITER

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Isabel, E-mail: mir@isr.ist.utl.pt [Institute for Systems and Robotics/Instituto Superior Tecnico, Lisboa (Portugal); Damiani, Carlo [Fusion for Energy, Barcelona (Spain); Tesini, Alessandro [ITER Organization, Cadarache (France); Kakudate, Satoshi [ITER Tokamak Device Group, Japan Atomic Energy Agency, Ibaraki (Japan); Siuko, Mikko [VTT Systems Engineering, Tampere (Finland); Neri, Carlo [Associazione EURATOM ENEA, Frascati (Italy)

2011-10-15

The ITER remote handling (RH) maintenance system is a key component in ITER operation both for scheduled maintenance and for unexpected situations. It is a complex collection and integration of numerous systems, each one at its turn being the integration of diverse technologies into a coherent, space constrained, nuclearised design. This paper presents an integrated view and recent results related to the Blanket RH System, the Divertor RH System, the Transfer Cask System (TCS), the In-Vessel Viewing System, the Neutral Beam Cell RH System, the Hot Cell RH and the Multi-Purpose Deployment System.

A study of preslaughter pig handling and stunning in selected South African Highveld Region abattoirs

Directory of Open Access Journals (Sweden)

B.T. Spencer

2010-05-01

Full Text Available The study hypothesis was that pre-slaughter handling is not conducted in such a way that pigs can be considered humanely slaughtered, nor is it conducive to promoting those properties of fresh meat that could enhance pork quality. The 1st phase of the investigation was aimed at confirming the present compliance level within the prescribed norms. To this end the importance of stunning induction requirements for effective electrical stunning, the welfare implications relating to the pre-slaughter handling of pigs and the stunning and sticking techniques were investigated. Pre-slaughter welfare of the pigs at the abattoir was found to be influenced at the outset by the origin and type of pig slaughtered, the daily throughput range of pigs and the type of abattoir involved. A disappointing pre-arrival aspect was that deficiencies in road motor vehicles were observed while off-loading pigs. Through poor design or lack of maintenance, another factor that hampered free movement of pigs was the off-loading facilities. The nature of animal behaviour in the pens, in the passages and when going into the stunning area was directly related to the pig handling efficiency and to the nature and extent of design and maintenance problems with equipment. None of the abattoirs had a well designed in-feed to a well planned stunning area / facility, and a very high level of pig pre-slaughter stress prevailed. The optimum position of the electrodes is virtually impossible to attain under practical conditions and the practice of repeat application of electrical stunning is common. Of the total sample size (n = 1175, 34% were difficult to shackle, 90% of these being from the abattoirs tending to slaughter more routinely a wide range of different sized pigs. In this survey 149 pigs (13 % required more than a single sticking attempt to bleed out properly, considerably higher than in other published reports.

Reprogramming the articulated robotic arm for glass handling by using Arduino microcontroller

Science.gov (United States)

Razali, Zol Bahri; Kader, Mohamed Mydin M. Abdul; Kadir, Mohd Asmadi Akmal; Daud, Mohd Hisam

2017-09-01

The application of articulated robotic arm in industries is raised due to the expansion of using robot to replace human task, especially for the harmful tasks. However a few problems happen with the program use to schedule the arm, Thus the purpose of this project is to design, fabricate and integrate an articulated robotic arm by using Arduino microcontroller for handling glass sorting system. This project was designed to segregate glass and non-glass waste which would be pioneer step for recycling. This robotic arm has four servo motors to operate as a whole; three for the body and one for holding mechanism. This intelligent system is controlled by Arduino microcontroller and build with optical sensor to provide the distinguish objects that will be handled. Solidworks model was used to produce the detail design of the robotic arm and make the mechanical properties analysis by using a CAD software.

Handling radioactivity: a practical approach for scientists and engineers

International Nuclear Information System (INIS)

Stewart, D.C.

1981-01-01

The aim of this book is to present an overall view in a descriptive and essentially nonmathematical way of the practicalities of handling radioactivity. It is hoped that the material will be particularly helpful to those entering the nuclear field for the first time and to those working in related areas whose responsibilities require them to have a general knowledge of the subject of radioactivity handling and its vocabulary. The presentation is primarily for bench-scale operations. There is a considerable emphasis on facilities since these are fundamental to the safe handling of active materials. Facility design and detail is also unfortunately an area where the relevant information is largely scattered through literature sources that are not accessible to most readers. Some of the topics surveyed - such as dosimetry, shielding and nuclear criticality - are extremely complex and no pretense is made that the treatment here represents more than bare bone summaries of the fields. A considerable effort has been made to cite the key references in each area where more detailed information can be found. A few additional useful references not cited directly in the text appear in an abbreviated bibliography at the end of the book

Enhanced wood fuel handling: market and design studies

Energy Technology Data Exchange (ETDEWEB)

Landen, R.; Rippengal, R.; Redman, A.N.

1997-09-01

This report examines the potential for the manufacture and sale of novel wood fuel handling systems as a means of addressing users' concerns regarding current capital costs and potential high labour costs of non-automated systems. The report considers fuel handling technology that is basically appropriate for wood-fired heating systems of between c.100kW and c.1MW maximum continuous rating. This report details work done by the project collaborators in order to: (1) assess the current status of wood fuel handling technology; (2) evaluate the market appetite for improved wood fuel handling technology; (3) derive capital costs which are acceptable to customers; (4) review design options; and (5) select one or more design options worthy of further development. The current status of wood fuel handling technology is determined, and some basic modelling to give guidance on acceptable capital costs of 100-1000kW wood fuel handling systems is undertaken. (author)

Science and technology related global problems: An international survey of science educators

Science.gov (United States)

Bybee, Rodger W.; Mau, Teri

This survey evaluated one aspect of the Science-Technology-Society theme, namely, the teaching of global problems related to science and technology. The survey was conducted during spring 1984. Two hundred sixty-two science educators representing 41 countries completed the survey. Response was 80%. Findings included a ranking of twelve global problems (the top six were: World Hunger and Food Resources, Population Growth, Air Quality and Atmosphere, Water Resources, War Technology, and Human Health and Disease). Science educators generally indicated the following: the science and technology related global problems would be worse by the year 2000; they were slightly or moderately knowledgeable about the problems; print, audio-visual media, and personal experiences were their primary sources of information; it is important to study global problems in schools; emphasis on global problems should increase with age/grade level; an integrated approach should be used to teach about global problems; courses including global problems should be required of all students; most countries are in the early stages of developing programs including global problems; there is a clear trend toward S-T-S; there is public support for including global problems; and, the most significant limitations to implementation of the S-T-S theme (in order of significance) are political, personnel, social, psychological, economic, pedagogical, and physical. Implications for research and development in science education are discussed.

Social Inequalities and Gender Differences in the Experience of Alcohol-Related Problems

Science.gov (United States)

Grittner, Ulrike; Kuntsche, Sandra; Graham, Kathryn; Bloomfield, Kim

2012-01-01

Aims: To examine the influence of country-level characteristics and individual socio-economic status (SES) on individual alcohol-related consequences. Methods: Data from 42,655 men and women collected by cross-sectional surveys in 25 countries of the Gender, Alcohol and Culture: An International Study study were used. The individual SES was measured by the highest attained educational level. Alcohol-related consequences were defined as the self-report of at least one internal or one external consequence in the last year. The relationship between individuals’ education and alcohol-related consequences was examined by meta-analysis. In a second step, the individual level data and country data were combined in multilevel models. As country-level indicators, we used the purchasing power parity of the gross national income (GNI), the Gini coefficient and the Gender Gap Index. Results: Lower educated men and women were more likely to report consequences than higher educated men and women even after controlling for drinking patterns. For men, this relation was significant for both internal and external problems. For women, it was only significant for external problems. The GNI was significantly associated with reporting external consequences for men such that in lower income countries men were more likely to report social problems. Conclusion: The fact that problems accrue more quickly for lower educated persons even if they drink in the same manner can be linked to the social or environmental dimension surrounding problems. That is, those of fewer resources are less protected from the experience of a problem or the impact of a stressful life event. PMID:22542707

Social inequalities and gender differences in the experience of alcohol-related problems.

Science.gov (United States)

Grittner, Ulrike; Kuntsche, Sandra; Graham, Kathryn; Bloomfield, Kim

2012-01-01

To examine the influence of country-level characteristics and individual socio-economic status (SES) on individual alcohol-related consequences. Data from 42,655 men and women collected by cross-sectional surveys in 25 countries of the Gender, Alcohol and Culture: An International Study study were used. The individual SES was measured by the highest attained educational level. Alcohol-related consequences were defined as the self-report of at least one internal or one external consequence in the last year. The relationship between individuals' education and alcohol-related consequences was examined by meta-analysis. In a second step, the individual level data and country data were combined in multilevel models. As country-level indicators, we used the purchasing power parity of the gross national income (GNI), the Gini coefficient and the Gender Gap Index. Lower educated men and women were more likely to report consequences than higher educated men and women even after controlling for drinking patterns. For men, this relation was significant for both internal and external problems. For women, it was only significant for external problems. The GNI was significantly associated with reporting external consequences for men such that in lower income countries men were more likely to report social problems. The fact that problems accrue more quickly for lower educated persons even if they drink in the same manner can be linked to the social or environmental dimension surrounding problems. That is, those of fewer resources are less protected from the experience of a problem or the impact of a stressful life event.

Organizational aspects of the handling of radiation accidents in the Federal Republic of Germany

International Nuclear Information System (INIS)

Fliedner, T.M.

1977-01-01

In the Federal Republic of Germany it is a legal requirement that persons exposed to ionizing radiation as a consequence of their employment in radiation facilities should be monitored. Some 90000 persons constitute the population 'at risk' for occupational radiation exposure. The actual radiation accident rate has been very low indeed. Nevertheless, precautions must be taken. Four radiation accident categories may be distinguished: uncomplicated, complicated, contamination and incorporation accidents. In the Federal Republic, the 'Berufsgenossenschaften' (BGS) are required to organize radiation accident care if necessary and take all measures to prevent them. The BGS has issued a pamphlet 'First Aid in case of Increased Exposure to Ionizing Radiation' as a guide to all personnel concerned. The BGS has also organized 5 'Regional Radiation Protection Centres' available to give advice 7 days a week, 24 hours a day in Hamburg, Homburg (Saar), Juelich, Karlsruhe und Munich. These centres are all equipped to provide first aid and decontamination and to cater for a short term stay until a decision is reached as to how to handle a particular accident. The special burns hospital of the BGS in Ludwigshafen is equipped with sterile rooms to handle 'complicated accidents', in particular when skin burns are involved. Two mobile 'radiation protection units' are available in Karlsruhe and Munich to provide help in all problems of dosimetry and health physics. A medical advisory team has been formed to supplement local physicians in dealing with special problems in the handling of radiation accident victims. (author)

On a covariant 2+2 formulation of the initial value problem in general relativity

International Nuclear Information System (INIS)

Smallwood, J.

1980-03-01

The initial value problems in general relativity are considered from a geometrical standpoint with especial reference to the development of a covariant 2+2 formalism in which space-time is foliated by space-like 2-surfaces under the headings; the Cauchy problem in general relativity, the covariant 3+1 formulation of the Cauchy problem, characteristic and mixed initial value problems, on locally imbedding a family of null hypersurfaces, the 2+2 formalism, the 2+2 formulation of the Cauchy problem, the 2+2 formulation of the characteristic and mixed initial value problems, and a covariant Lagrangian 2+2 formulation. (U.K.)

Remote handling for an ISIS target change

International Nuclear Information System (INIS)

Broome, T.A.; Holding, M.

1989-01-01

During 1987 two ISIS targets were changed. This document describes the main features of the remote handling aspects of the work. All the work has to be carried out using remote handling techniques. The radiation level measured on the surface of the reflector when the second target had been removed was about 800 mGy/h demonstrating that hands on operations on any part of the target reflector moderator assembly is not practical. The target changes were the first large scale operations in the Target Station Remote Handling Cell and a great deal was learned about both equipment and working practices. Some general principles emerged which are applicable to other active handling tasks on facilities like ISIS and these are discussed below. 8 figs

Safe handling of radioactive isotopes. Handbook 42

Energy Technology Data Exchange (ETDEWEB)

NONE

1949-09-15

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling and utilization. Through the courtesy of the National Research Council about a year ago, several hundred draft copies of this report were circulated to all leading workers and authorities in the field for comment and criticism. The present handbook embodies all pertinent suggestions received from these people. Further comment will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this handbook lay in the uncertainty regarding permissible radiation exposure levels - particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the two subcommittees mentioned above. The present Handbook has been prepared by the Subcommittee on the Handling of Radioactive Isotopes and Fission Products.

Safe handling of radioactive isotopes. Handbook 42

International Nuclear Information System (INIS)

1949-09-01

With the increasing use of radioactive isotopes by industry, the medical profession, and research laboratories, it is essential that certain minimal precautions be taken to protect the users and the public. The recommendations contained in this handbook represent what is believed to be the best available opinions on the subject as of this date. As our experience with radioisotopes broadens, we will undoubtedly be able to improve and strengthen the recommendations for their safe handling and utilization. Through the courtesy of the National Research Council about a year ago, several hundred draft copies of this report were circulated to all leading workers and authorities in the field for comment and criticism. The present handbook embodies all pertinent suggestions received from these people. Further comment will be welcomed by the committee. One of the greatest difficulties encountered in the preparation of this handbook lay in the uncertainty regarding permissible radiation exposure levels - particularly for ingested radioactive materials. The establishment of sound figures for such exposure still remains a problem of high priority for many conditions and radioactive substances. Such figures as are used in this report represent the best available information today. If, in the future, these can be improved upon, appropriate corrections will be issued. The subject will be under continuous study by the two subcommittees mentioned above. The present Handbook has been prepared by the Subcommittee on the Handling of Radioactive Isotopes and Fission Products

Materials Handling. Module SH-01. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

Hot gas handling device and motorized vehicle comprising the device

NARCIS (Netherlands)

Klein Geltink, J.; Beukers, A.; Van Tooren, M.J.L.; Koussios, S.

2012-01-01

The invention relates to a device for handling hot exhaust gasses discharged from an internal combustion engine. The device comprises a housing (2), enclosing a space (3) for transporting the exhaust gasses. The housing (2) is provided with an entrance - opening (4) for the exhaust gasses discharged

Classification plan and handling of the hydrographic basin of the Sueva River

International Nuclear Information System (INIS)

Gil T, Walter O; Correa F, Hyarold

1998-01-01

The study was centered in the design of a classification proposal and handling for the basin of the Sueva River, guided to begin processes of the hydric resource conservation and that it allowed to harmonize the productive processes that are given to the interior of the basin with the environmental offer; strategies were designed guided to link to the community to the diagnostic process and design of the plan that shows the more relevant aspects of the environmental problem

Development of tritium-handling technique

International Nuclear Information System (INIS)

Ohmura, Hiroshi; Hosaka, Akio; Okamoto, Takahumi

1988-01-01

The overview of developing activities for tritium-handling techniques in IHI are presented. To establish a fusion power plant, tritium handling is one of the key technologies. Recently in JAERI, conceptual design of FER (Fusion Experimental Reactor) has been carried out, and the FER system requires a processing system for a large amount of tritium. IHI concentrate on investigation of fuel gas purification, isotope separation and storage systems under contract with Toshiba Corporation. Design results of the systems and each components are reviewed. IHI has been developing fundamental handling techniques which are the ZrNi bed for hydrogen isotope storage and isotope separation by laser. The ZrNi bed with a tritium storage capacity of 1000 Ci has been constructed and recovery capability of the hydrogen isotope until 10 -4 Torr {0.013 Pa} was confirmed. In laser isotope separation, the optimum laser wave length has been determined. (author)

Handling of waste in ports

International Nuclear Information System (INIS)

Olson, P.H.

1994-01-01

The regulations governing the handling of port-generated waste are often national and/or local legislation, whereas the handling of ship-generated waste is governed by the MARPOL Convention in most parts of the world. The handling of waste consists of two main phases -collection and treatment. Waste has to be collected in every port and on board every ship, whereas generally only some wastes are treated and to a certain degree in ports and on board ships. This paper considers the different kinds of waste generated in both ports and on board ships, where and how it is generated, how it could be collected and treated. The two sources are treated together to show how some ship-generated waste may be treated in port installations primarily constructed for the treatment of the port-generated waste, making integrated use of the available treatment facilities. (author)

Magnetic resonance imaging of meniscal bucket-handle tears

International Nuclear Information System (INIS)

Dfouni, N.; Garcia, J.; Kindynis, Ph.; Bosson, D.

1997-01-01

To define MR signs of meniscal bucket-handle tears and evaluate the diagnostic efficiency of this technique. Retrospective study of 30 patients with a meniscal bucket-handle tear and 30 with a different type of tear, all proven by arthroscopy. The following MR signs of a bucket-handle tear were evaluated: 'separate meniscal fragment, 'double posterior cruciate ligament', 'snake sign' and 'double anterior horn'. A correct diagnosis of a bucket-handle tear was only made in 18/30 of patients. Several of the MR signs were seen in the same patient in 17 cases. A double posterior cruciate ligament was present only in cases of medial meniscus tears. The 12 menisci without these signs, and therefore not diagnosed as bucket-handle tears, were all classified as meniscal tears on the basis of signal extending to the meniscal surface. Nine of these were not displaced into the inter-condylar notch at arthroscopy. The interobserver agreement was excellent: kappa 0.88. The diagnosis of a bucket-handle meniscal tear, if it is displaced, can be made when one or more of the four MR evaluated signs are present. Other forms of meniscal tears are only exceptionally diagnosed as bucket-handle tears. (authors)

Factors influencing the detection rate of drug-related problems in community pharmacy

DEFF Research Database (Denmark)

Westerlund, T; Almarsdóttir, Anna Birna; Melander, A

1999-01-01

This study analyzes relationships between the number of drug-related problems detected in community pharmacy practice and the educational level and other characteristics of pharmacy personnel and their work sites. Random samples of pharmacists, prescriptionists and pharmacy technicians were drawn...... by each professional. The regression analysis showed the educational level of the professional to have a statistically significant effect on the detection rate, with pharmacists finding on average 2.5 more drug-related problems per 100 patients than prescriptionists and about 3.6 more than technicians....... The results of this study indicate the importance of education and training of pharmacy personnel in detection of drug-related problems. This findings speaks in favor of increasing the pharmacist to other personnel ratio, provided the higher costs will be offset by societal benefits....

Pharmacist intervention in drug-related problems for patients with ...

African Journals Online (AJOL)

Purpose: To investigate the role of the community pharmacist in identifying, preventing and resolving drug related problems (DRPs) encountered by patients, with particular emphasis on cardiovascular drugs in community pharmacies in Northern Cyprus, Turkey. Methods: A prospective observational study for the ...

Procedure of safe handling with cytostatic drugs

Directory of Open Access Journals (Sweden)

Kodžo Dragan

2003-01-01

Full Text Available Working group for safe handling with cytostatic drugs has been formed by the Ministry of Health, and it consists of professionals from IORS, Federal Bureau of Weights and Measures, Industrial Medicine, Institute of Hematology, Military Medical Academy, and Crown Agents. The aim of this working group is to prepare procedures for safe handling with cytostatic drugs, as well as program for educational seminar for nurses, medical technicians, and pharmaceutical technicians. The procedures will serve as a guide of good practice of oncology health care, and will refer to all actions that health care professionals carry out from the moment of drugs arrival to the pharmacy to the moment of their application. In the first segment of this procedure, general rules are given for working with cytotoxic agents, control for risky exposures, safe system of work, control of working environment, monitoring of the employees' health condition adequate protection in the working environment, protective equipment of the employees (gloves, mask, cap, eyeglasses, shoe covers, coats and chambers for vertical laminary air stream. Storing of cytostatics, procedure in case of accident, and waste handling and removal are also described in this segment. Fifty-three standard operational procedures are described in detail in the second segment. Training scheme for preparation of chemotherapy is given in the third segment - education related to various fields and practical part, which would be carried out through workshops, and at the end of the course participants would pass a test and obtain certificate. After the procedures for safe handling with cytostatics are legally regulated employer will have to provide minimum of protective equipment, special rooms for the drugs dissolving, chambers with laminar airflow, 6 hours working time, rotation of the staff working with drugs dissolving in intervals of every five years, higher efficiency, better health control. In conclusion

Software for handling and replacement of missing data

Directory of Open Access Journals (Sweden)

Mayer, Benjamin

2009-10-01

Full Text Available In medical research missing values often arise in the course of a data analysis. This fact constitutes a problem for different reasons, so e.g. standard methods for analyzing data lead to biased estimates and a loss of statistical power due to missing values, since those methods require complete data sets and therefore omit incomplete cases for the analyses. Furthermore missing values imply a certain loss of information for what reason the validity of results of a study with missing values has to be rated less than in a case where all data had been available. For years there are methods for replacement of missing values (Rubin, Schafer to tackle these problems and solve them in parts. Hence in this article we want to present the existing software to handle and replace missing values on the one hand and give an outline about the available options to get information on the other hand. The methodological aspects of the replacement strategies are delineated just briefly in this article.

Differences in Muscle Activity During Cable Resistance Training Are Influenced by Variations in Handle Types.

Science.gov (United States)

Rendos, Nicole K; Heredia Vargas, Héctor M; Alipio, Taislaine C; Regis, Rebeca C; Romero, Matthew A; Signorile, Joseph F

2016-07-01

Rendos, NK, Heredia Vargas, HM, Alipio, TC, Regis, RC, Romero, MA, and Signorile, JF. Differences in muscle activity during cable resistance training are influenced by variations in handle types. J Strength Cond Res 30(7): 2001-2009, 2016-There has been a recent resurgence in the use of cable machines for resistance training allowing movements that more effectively simulate daily activities and sports-specific movements. By necessity, these devices require a machine/human interface through some type of handle. Considerable data from material handling, industrial engineering, and exercise training studies indicate that handle qualities, especially size and shape, can significantly influence force production and muscular activity, particularly of the forearm muscles, which affect the critical link in activities that require object manipulation. The purpose for this study was to examine the influence of three different handle conditions: standard handle (StandH), ball handle with the cable between the index and middle fingers (BallIM), and ball handle with the cable between the middle and ring fingers (BallMR), on activity levels (rmsEMG) of the triceps brachii lateral and long heads (TriHLat, TriHLong), brachioradialis (BR), flexor carpi radialis (FCR), extensor carpi ulnaris, and extensor digitorum (ED) during eight repetitions of standing triceps pushdown performed from 90° to 0° elbow flexion at 1.5 s per contractile stage. Handle order was randomized. No significant differences were seen for triceps or BR rmsEMG across handle conditions; however, relative patterns of activation did vary for the forearm muscles by handle condition, with more coordinated activation levels for the FCR and ED during the ball handle conditions. In addition, the rmsEMG for the ED was significantly higher during the BallIM than any other condition and during the BallMR than the StandH. These results indicate that the use of ball handles with the cable passing between different fingers

How to Handle Impasses in Bargaining.

Science.gov (United States)

Durrant, Robert E.

Guidelines in an outline format are presented to school board members and administrators on how to handle impasses in bargaining. The following two rules are given: there sometimes may be strikes, but there always will be settlements; and on the way to settlements, there always will be impasses. Suggestions for handling impasses are listed under…

Problems of Development of the Turkish-Iranian Relations after Islamic Revolution of 1979

Directory of Open Access Journals (Sweden)

A V Suleymanov

2013-12-01

Full Text Available Problems of development of the Turkish-Iranian relations after Islamic revolution of 1979 are considered in the article. Based on comparative, historical and system methods, the author analyzes in details ideological and political problems of mutual relations of the subsequent periods, their characteristic and distinctive features.

Problems and challenges in social marketing.

Science.gov (United States)

Bloom, P N; Novelli, W D

1981-01-01

This article reviews the problems that arise when general marketing principles are applied to social programs. Social marketing is conceptualized as the design, implementation, and control of programs seeking to increase the acceptability of a social ideal or practice in a target group. These problems can occur in 8 basic decision-making areas: market analysis, market segmentation, product strategy development, pricing strategy development, channel strategy development, communications strategy development, organizational design and planning, and evaluation. Social marketers find that they have less good secondary data about their consumers, more problems obtaining valid and reliable measures of relevant variables, more difficulty sorting out the relative influence of determinants of consumer behavior, and more problems getting consumer research funded than marketers in the commercial sector. They tend to have less flexibility in shaping their products and more difficulty formulating product concepts. Problems associated with establishing, utilizing, and controlling distribution channels comprise another major difference between social and more conventional forms of marketing. Social marketers also find that their communications options are somewhat limited as a result of problems associated with use of paid advertisements, pressures not to use certain types of appeals in their messages, and the need to communicate large amounts of information in their messages. Moreover, social marketers must function in organizations where marketing activities are poorly understood, underappreciated, and inappropriately located. Finally, they face problems trying to define effectiveness measures or estimating the contribution their program has made toward the achievement of certain objectives. If all these problems are anticipated and handled creatively, social marketing efforts can succeed.

[The current problems and cross-cultural perspectives of patient-doctor relation: an overview].

Science.gov (United States)

Koch, Eckhardt; Turgut, Tolga

2004-01-01

The success of the treatment in medicine, especially in psychiatry is based on the form and the strength of the patient-doctor relation. This complex and dynamic relation is changing in accordance with the social and technological development of the society. The context of the patient-doctor relation is determined by the present day culture as well as the traditional background. An overview of current patient-doctor relation and of problems that physicians and in particular psychiatrists meet is presented. Physicians have responsibilities in building patient-doctor relation. The ethical and legal aspects of these responsibilities are presented. The former paternalistic type of patient-doctor relation is evolving into a more equal and democratic relation. New problems are being encountered continuously in the changing process. Beside the of the process itself, the effects of progress in medical technology and communication systems on patient-doctor relation and the pressure, put from the insurance companies and/or authorities on physicians, which impair the trust between the physician and his patient, are making the process more difficult. The issues of compliance, sexual harassment and unique problems of patient-doctor relations in psychiatry are the other subtopics in the article. The cross-cultural aspects of patient-doctor relations and encountered clinical problems are discussed with case examples particularly about Turkish immigrants, who live in Germany. Suggestions for psychiatrists in Germany to work out the challenges facing them are presented in the conclusion.

Solving fatigue-related problems with cardiac arrest survivors living in the community.

Science.gov (United States)

Kim, Young Joo; Rogers, Joan C; Raina, Ketki D; Callaway, Clifton W; Rittenberger, Jon C; Leibold, Mary Lou; Holm, Margo B

2017-09-01

The aim was to describe fatigue-related problems reported by post-cardiac arrest adults with chronic fatigue and energy conservation strategies generated using an Energy Conservation plus Problem Solving Therapy intervention. Following an introduction to the intervention process outlined in a Participant Workbook, participants engaged in the telephone intervention by identifying one to two fatigue-related problems. They then brainstormed with the interventionist to identify potential strategies to reduce fatigue, tested them, and either modified the strategies or moved to the next problem over three to five sessions. Eighteen cardiac arrest survivors with chronic fatigue identified instrumental activities of daily living and leisure activities as fatigue-related activities more frequently than basic activities of daily living. Energy Conservation strategies used most frequently were: plan ahead, pace yourself, delegate to others, and simplify the task. Post-cardiac arrest adults living in the community with chronic fatigue can return to previous daily activities by using energy conservation strategies such as planning ahead, pacing tasks, delegating tasks, and simplifying tasks. Copyright © 2017 Elsevier B.V. All rights reserved.

Simulator: A Pilot Interactive Simulation Program for Use in Teaching Public Relations.

Science.gov (United States)

Pavlik, John V.

An interactive simulation program was developed for use in teaching students how to handle public relations problems. The program user is placed in the role of assistant newsletter editor, facing a series of decision-making situations. Each choice the user makes affects the subsequent reality created by the program, which is designed to provide…

A Hard Road: Driving Local Action against Alcohol Related Problems in a Rural Town

Directory of Open Access Journals (Sweden)

Julaine Allan

2012-12-01

Full Text Available Context is important in developing strategies to address alcohol related violence. Knowledge of local conditions is critical to action in rural areas. The aim of this study was to gather information about context specific alcohol related problems experienced by frontline workers in a regional centre to inform the local alcohol action plan. Frontline workers were invited to participate in one of five focus group discussions that investigated problems experienced as a result of other people’s alcohol use. Alcohol related problems were more frequently associated with time periods than any single group in the community. Social media was used to incite arguments between groups in different venues during the lock-out periods. The focus groups identified that the location of licensed premises and a taxi rank; and previous relationships between protagonists were the key contextual factors causing alcohol related problems. A second taxi rank was identified as a useful local management strategy. Supply reduction was suggested as a key factor in long term solutions to alcohol related problems in rural towns. The local liquor accord did not want to reduce supply of alcohol by closing late night venues earlier. Local action to reduce alcohol related problems will be limited to pragmatic solutions because supply reduction is unacceptable to those in the business of selling alcohol.

WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

J. D. Bigbee

2000-06-21

The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status.

WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

J. D. Bigbee

2000-01-01

The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status

Quinone-induced protein handling changes: Implications for major protein handling systems in quinone-mediated toxicity

International Nuclear Information System (INIS)

Xiong, Rui; Siegel, David; Ross, David

2014-01-01

Para-quinones such as 1,4-Benzoquinone (BQ) and menadione (MD) and ortho-quinones including the oxidation products of catecholamines, are derived from xenobiotics as well as endogenous molecules. The effects of quinones on major protein handling systems in cells; the 20/26S proteasome, the ER stress response, autophagy, chaperone proteins and aggresome formation, have not been investigated in a systematic manner. Both BQ and aminochrome (AC) inhibited proteasomal activity and activated the ER stress response and autophagy in rat dopaminergic N27 cells. AC also induced aggresome formation while MD had little effect on any protein handling systems in N27 cells. The effect of NQO1 on quinone induced protein handling changes and toxicity was examined using N27 cells stably transfected with NQO1 to generate an isogenic NQO1-overexpressing line. NQO1 protected against BQ–induced apoptosis but led to a potentiation of AC- and MD-induced apoptosis. Modulation of quinone-induced apoptosis in N27 and NQO1-overexpressing cells correlated only with changes in the ER stress response and not with changes in other protein handling systems. These data suggested that NQO1 modulated the ER stress response to potentiate toxicity of AC and MD, but protected against BQ toxicity. We further demonstrated that NQO1 mediated reduction to unstable hydroquinones and subsequent redox cycling was important for the activation of the ER stress response and toxicity for both AC and MD. In summary, our data demonstrate that quinone-specific changes in protein handling are evident in N27 cells and the induction of the ER stress response is associated with quinone-mediated toxicity. - Highlights: • Unstable hydroquinones contributed to quinone-induced ER stress and toxicity

Quinone-induced protein handling changes: Implications for major protein handling systems in quinone-mediated toxicity

Energy Technology Data Exchange (ETDEWEB)

Xiong, Rui; Siegel, David; Ross, David, E-mail: david.ross@ucdenver.edu

2014-10-15

Para-quinones such as 1,4-Benzoquinone (BQ) and menadione (MD) and ortho-quinones including the oxidation products of catecholamines, are derived from xenobiotics as well as endogenous molecules. The effects of quinones on major protein handling systems in cells; the 20/26S proteasome, the ER stress response, autophagy, chaperone proteins and aggresome formation, have not been investigated in a systematic manner. Both BQ and aminochrome (AC) inhibited proteasomal activity and activated the ER stress response and autophagy in rat dopaminergic N27 cells. AC also induced aggresome formation while MD had little effect on any protein handling systems in N27 cells. The effect of NQO1 on quinone induced protein handling changes and toxicity was examined using N27 cells stably transfected with NQO1 to generate an isogenic NQO1-overexpressing line. NQO1 protected against BQ–induced apoptosis but led to a potentiation of AC- and MD-induced apoptosis. Modulation of quinone-induced apoptosis in N27 and NQO1-overexpressing cells correlated only with changes in the ER stress response and not with changes in other protein handling systems. These data suggested that NQO1 modulated the ER stress response to potentiate toxicity of AC and MD, but protected against BQ toxicity. We further demonstrated that NQO1 mediated reduction to unstable hydroquinones and subsequent redox cycling was important for the activation of the ER stress response and toxicity for both AC and MD. In summary, our data demonstrate that quinone-specific changes in protein handling are evident in N27 cells and the induction of the ER stress response is associated with quinone-mediated toxicity. - Highlights: • Unstable hydroquinones contributed to quinone-induced ER stress and toxicity.

Handling Kids in Crisis with Care

Science.gov (United States)

Bushinski, Cari

2018-01-01

The Handle with Care program helps schools help students who experience trauma. While at the scene of an event like a domestic violence call, drug raid, or car accident, law enforcement personnel determine the names and school of any children present. They notify that child's school to "handle ___ with care" the next day, and the school…

Food handling and mastication in the carp (Cyprinus carpio L.)

NARCIS (Netherlands)

Sibbing, F.A.

1984-01-01

The process of food handling in the common carp ( Cyprinus carpio L.) and its structures associated with feeding are analyzed. The aim of this study is to explain the relation between the the architecture of the head and its functions in food processing and to

Monitor: a short-cut approach to remote-handling at LAMPF

International Nuclear Information System (INIS)

Horne, R.A.; Ekberg, E.L.

1975-01-01

The monitor, constructed from relatively cheap commercial components, is a straightforward, totally remotely operated handling system intended to work on components in the LAMPF external beam line or elsewhere. It can be towed or lifted into position, then hard-wire controlled from a distance by using television. (auth)

Survey of tritiated oil sources and handling practices

International Nuclear Information System (INIS)

Miller, J.M.

1994-08-01

Tritium interactions with oil sources (primarily associated with pumps) in tritium-handling facilities can lead to the incorporation of tritium in the oil and the production of tritiated hydrocarbons. This results in a source of radiological hazard and the need for special handling considerations during maintenance, decontamination, decommissioning and waste packaging and storage. The results of a general survey of tritiated-oil sources and their associated characteristics, handling practices, analysis techniques and waste treatment/storage methods are summarized here. Information was obtained from various tritium-handling laboratories, fusion devices, and CANDU plants. 38 refs., 1 fig

Effects of handling on fear reactions in young Icelandic horses

DEFF Research Database (Denmark)

Marsbøll, Anna Feldberg; Christensen, Janne Winther

2015-01-01

To investigate the effect of a short-term standardised handling procedure on reactions of young horses in 2 types of fear tests (including and excluding human handling). Study design An experimental study with 3-year-old Icelandic horses (n = 24). Methods Handled horses (n = 12) were trained according...... to a standardised handling procedure whereas controls (n = 12) remained untrained. Behavioural and heart rate responses in a novel object test and 2 handling fear tests (HFTs) were measured. The HFTs were conducted with both an unknown (HFT-unknown) and a known handler (HFT-known). Results There was no effect...... correlated significantly between tests. Conclusions Previous handling may affect the behavioural fear response of horses when handled by their usual handler, whereas this effect did not apply to an unknown handler. Heart rates appeared unaffected by handling and may be a more reliable indicator...

Discrimination and alcohol-related problems among college students: a prospective examination of mediating effects.

Science.gov (United States)

Hatzenbuehler, Mark L; Corbin, William R; Fromme, Kim

2011-06-01

Discrimination is a risk factor for health-risk behaviors, including alcohol abuse. Far less is known about the mechanisms through which discrimination leads to alcohol-related problems, particularly during high-risk developmental periods such as young adulthood. The present study tested a mediation model using prospective data from a large, diverse sample of 1539 college students. This model hypothesized that discrimination would be associated with established cognitive (positive alcohol expectancies) and affective (negative affect and coping motives) risk factors for alcohol-related problems, which would account for the prospective association between discrimination and alcohol problems. Structural equation modeling indicated that discrimination was associated cross-sectionally with negative affect and more coping motives for drinking, but not with greater alcohol expectancies. Coping motives mediated the prospective relationship between discrimination and alcohol-related problems. Additionally, results indicated significant indirect effects from discrimination to alcohol-related problems through negative affect and coping motives. These associations were evident for multiple groups confronting status-based discrimination, including women, racial/ethnic minorities, and lesbian/gay/bisexual individuals. This study identified potential affective mechanisms linking discrimination to alcohol-related problems. Results suggest several avenues for prevention and intervention efforts with individuals from socially disadvantaged groups. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Noise levels, noise annoyance, and hearing-related problems in a dental college.

Science.gov (United States)

Ahmed, Hafiz Omer; Ali, Wesal Jasim

2017-05-04

Through a cross-sectional survey and integrated sound level meter, this research examined noise exposure and auditory- and nonauditory-related problems experienced by students of a dentistry college located in the United Arab Emirates (UAE). A structured interview questionnaire was used to examine hearing-related problems, noise annoyance, and awareness of 114 students toward noise. The results showed that maximum noise levels were between 65 and 79 dB(A) with peak levels (high and low frequencies) ranging between 89 and 93 dB(A). Around 80% of the students experienced a certain degree of noise annoyance; 54% reported one of the hearing-related problems; and about 10% claimed to have hearing loss to a certain extent. It is recommended that sound-absorbent materials be used during the construction of dental clinics and laboratories to reduce the noise levels.

Spoken commands control robot that handles radioactive materials

International Nuclear Information System (INIS)

Phelan, P.F.; Keddy, C.; Beugelsdojk, T.J.

1989-01-01

Several robotic systems have been developed by Los Alamos National Laboratory to handle radioactive material. Because of safety considerations, the robotic system must be under direct human supervision and interactive control continuously. In this paper, we describe the implementation of a voice-recognition system that permits this control, yet allows the robot to perform complex preprogrammed manipulations without the operator's intervention. To provide better interactive control, we connected to the robot's control computer, a speech synthesis unit, which provides audible feedback to the operator. Thus upon completion of a task or if an emergency arises, an appropriate spoken message can be reported by the control computer. The training programming and operation of this commercially available system are discussed, as are the practical problems encountered during operations

Some geomedical problems in relation to soil science

International Nuclear Information System (INIS)

Laag, J.

1988-01-01

Geomedicine may be defined as the science dealing with the influence of ordinary environmental factors on geographical distribution of health problems in man and animals. An important group of geomedical problems is connected to nutrition. These problems may either be caused by deficiency or surplus of certain matters. Many questions concerning the pollution of nature are classified under the latter group Radioactive pollutants are regarded as important special occurrences under this group. In order to be able to solve complicated geomedical problems, knowledge is needed on the circulation processes rocks-soils-water-plants-animals-man, and waste products back to the soils. The registration of locations of different radioactive elements can give basic material for special geomedical conclusions. Many chemical reactions in which radioactive matter are involved, depend on properties of the soils. Humus and clay minerals have, generally speaking, a high capacity for the absorbtion of soluble matter, but great variations occur. The reactions of radioactive isotopes supplied from the atmosphere, depend on properties of the soil. Radioactive substances are leached relatively rapidly from a soil with low absorption capacity, and may thus be taken away from the circulation in which terrestrial plants, animals and man take part. If the substances is strongly absorbed (fixed), they can also to some extent be withdrawn from the circulation processes

Handling wood shavings

Energy Technology Data Exchange (ETDEWEB)

1974-09-18

Details of bulk handling equipment suitable for collection and compressing wood waste from commercial joinery works are discussed. The Redler Bin Discharger ensures free flow of chips from storage silo discharge prior to compression into briquettes for use as fuel or processing into chipboard.

Assessment of the environment-related problems and prospects of ...

African Journals Online (AJOL)

The study attempted to assess the environment-related problems and prospects of vegetable production in peri – urban areas of Lagos state, Nigeria. A total of one hundred and twenty (120) farmers were interviewed. Data collected were analyzed using frequency, percentages and Pearson Product Moment Correlation ...

Energy-momentum distribution: A crucial problem in general relativity

NARCIS (Netherlands)

Sharif, M.; Fatima, T.

2005-01-01

This paper is aimed to elaborate the problem of energy–momentum in general relativity. In this connection, we use the prescriptions of Einstein, Landau–Lifshitz, Papapetrou and Möller to compute the energy–momentum densities for two exact solutions of Einstein field equations. The space–times under

Characteristics of potential drug-related problems among oncology patients

NARCIS (Netherlands)

Bulsink, Arjan; Imholz, Alex L. T.; Brouwers, Jacobus R. B. J.; Jansman, Frank G. A.

Background Oncology patients are more at risk for drug related problems because of treatment with (combinations of) anticancer drugs, as they have a higher risk for organ failure or altered metabolism with progression of their disease. Objective The aim of this study was to characterize and to

The problem of time quantum mechanics versus general relativity

CERN Document Server

Anderson, Edward

2017-01-01

This book is a treatise on time and on background independence in physics. It first considers how time is conceived of in each accepted paradigm of physics: Newtonian, special relativity, quantum mechanics (QM) and general relativity (GR). Substantial differences are moreover uncovered between what is meant by time in QM and in GR. These differences jointly source the Problem of Time: Nine interlinked facets which arise upon attempting concurrent treatment of the QM and GR paradigms, as is required in particular for a background independent theory of quantum gravity. A sizeable proportion of current quantum gravity programs - e.g. geometrodynamical and loop quantum gravity approaches to quantum GR, quantum cosmology, supergravity and M-theory - are background independent in this sense. This book's foundational topic is thus furthermore of practical relevance in the ongoing development of quantum gravity programs. This book shows moreover that eight of the nine facets of the Problem of Time already occur upon ...

The development and evaluation of a stereoscopic television system for remote handling

International Nuclear Information System (INIS)

Dumbreck, A.A.; Murphy, S.P.; Smith, C.W.

1990-01-01

This paper describes the development and evaluation of a stereoscopic television system at Harwell Laboratory. The theory of stereo image geometry is outlined, and criteria for the matching of stereoscopic pictures are given. A stereoscopic television system designed for remote handling tasks has been produced, it provides two selectable angles of view and variable convergence, the display is viewed via polarizing spectacles. Evaluations have indicated improved performance with no problems of operator fatigue over a wide range of applications. (author)

Handling of bulk solids theory and practice

CERN Document Server

Shamlou, P A

1990-01-01

Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

Optimizing Manpower Allocation for Ground Handling Tasks in Airports using Column Generation

DEFF Research Database (Denmark)

Hansen, Anders Dohn; Kolind, Esben

2008-01-01

individual teams to cooperate. Cooperating teams have to be synchronized with each other. Due to the limited number of teams, some tasks may have to be left unassigned. The objective is to maximize the number of assigned tasks. The problem arises in various crew scheduling contexts where cooperation between......The Manpower Allocation Problem with Time Windows, Job-Teaming Constraints and a limited number of teams (m-MAPTWTC) is the problem of assigning m teams to a number of tasks, where both teams and tasks are restricted by time windows outside which operation is not possible. Tasks may require several...... teams/workers, possibly with different skills, is required. This study focuses on the scheduling of ground handling tasks in some of Europe's major airports. Any daily schedule must comply with the time windows and skill requirements of tasks, transportation time between locations, the working hours...

Torus sector handling system

International Nuclear Information System (INIS)

Grisham, D.L.

1981-01-01

A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

Potential problems from shipment of high-curie content contact-handled transuranic (CH-TRU) waste to WIPP

International Nuclear Information System (INIS)

Neill, R.H.; Channell, J.K.

1983-08-01

There are about 1000 drums of contact-handled transuranic (CH-TRU) wastes containing more than 100 Ci/drum of Pu-238 that are stored at the Savannah River Plant and at the Los Alamos National Laboratory. Studies performed at DOE laboratories have shown that large quantities of gases are generated in stored drums containing 100 Ci of 238 Pu. Concentrations of hydrogen gas in the void space of the drums are often found to be high enough to be explosive. None of the analyses in the DOE WIPP Final Environmental Impact Statement, Safety Analysis Report, and Preliminary Transportation Analysis have considered the possibility that the generation of hydrogen gas by radiolysis may create an explosive or flammable hazard that could increase the frequency and severity of accidental releases of radionuclides during transportation or handling. These high 238 Pu concentration containers would also increase the estimated doses received by individuals and populations from transportation, WIPP site operations, and human intrusion scenarios even if the possibility of gas-enhanced releases is ignored. The WIPP Project Office has evaluated this effect on WIPP site operations and is suggesting a maximum limit of 140 239 Pu equivalent curies (P-Ci) per drum so that postulated accidental off-site doses will not be larger than those listed in the FEIS. The TRUPACT container, which is being designed for the transportation of CH-TRU wastes to WIPP, does not appear to meet the Nuclear Regulatory Commission regulations requiring double containment for the transportation of plutonium in quantities >20 Ci. A 20 alpha Ci/shipment limit would require about 200,000 shipments for the 4 million curies of alpha emitters slated for WIPP

Robotics and remote handling concepts for disposal of high-level nuclear waste

International Nuclear Information System (INIS)

McAffee, Douglas; Raczka, Norman; Schwartztrauber, Keith

1997-01-01

This paper summarizes preliminary remote handling and robotic concepts being developed as part of the US Department of Energy's (DOE) Yucca Mountain Project. The DOE is currently evaluating the Yucca Mountain Nevada site for suitability as a possible underground geologic repository for the disposal of high level nuclear waste. The current advanced conceptual design calls for the disposal of more than 12,000 high level nuclear waste packages within a 225 km underground network of tunnels and emplacement drifts. Many of the waste packages may weigh as much as 66 tonnes and measure 1.8 m in diameter and 5.6 m long. The waste packages will emit significant levels of radiation and heat. Therefore, remote handling is a cornerstone of the repository design and operating concepts. This paper discusses potential applications areas for robotics and remote handling technologies within the subsurface repository. It also summarizes the findings of a preliminary technology survey which reviewed available robotic and remote handling technologies developed within the nuclear, mining, rail and industrial robotics and automation industries, and at national laboratories, universities, and related research institutions and government agencies

New, clean handling process introduced to improve cable quality

Energy Technology Data Exchange (ETDEWEB)

Hunt, C G

1990-05-01

The clean room system introduced by Canada Wire and Cable Limited in its Toronto plant for its cable manufacturing operation is described. While clean room technology is common in the food processing industry, optical and aerospace manufacturing processes, this is the first time it has been applied to wire and cable extrusion in North America. The purpose of the clean compound handling system is to prevent particle contamination in the shielding and cable insulation materials, as part of an effort to prevent premature underground electric cable failures. Two rooms are dedicated to handling different types of insulation compound, two are dedicated to receiving semi-conducting shielding material, and the fifth room functions as an air lock for the two insulation rooms. The atmosphere is highly regulated with programmable logic control. The air supply filters capture 99.97% of all particles 0.3 microns or larger. The system also maintains air temperature, relative humidity and static pressure. The life variability of cross-linked polyethylene primary distribution cable is dependant on five factors: material purity, extra clean compound handling, cable design, manufacturing process, and installation and operation practices. The clean room system is expected to result in cable that is more resistant to water treeing failures. 2 figs.

RUSSIAN CORPORATIONS: THE PROBLEM OF INTRACORPORATE RELATIONS AND INTERESTS

Directory of Open Access Journals (Sweden)

Olga Brizhak

2015-09-01

Full Text Available The article actualizes the problem of the study of intra-corporate relations and economic interests of the various economic actors involved in the corporate environment of the Russian economy. The author considers the specific conditions of socio-economic and innovative development of Russian big business.

Fuel handling solutions to power pulse at Bruce NGS A

International Nuclear Information System (INIS)

Day, R.C.

1996-01-01

In response to the discovery of the power pulse problem in March of 1993, Bruce A has installed flow straightening shield plugs in the inner zone channels of all units to partially reduce the gap and gain an increase in reactor power to 75%. After review and evaluation of solutions to manage the gap, including creep compensators and long fuel bundles, efforts have focused on a different solution involving reordering the fuel bundles to reverse the burnup profile. This configuration is maintained by fuelling with the flow and providing better support to the highly irradiated downstream fuel bundles by changing the design of the outlet shield plug. Engineering changes to the fuel handling control system and outlet shield plug are planned to be implemented starting in June 1996, thereby eliminating the power pulse problem and restrictions on reactor operating power. (author). 2 refs., 1 tab., 2 figs

Fuel handling solutions to power pulse at Bruce NGS A

Energy Technology Data Exchange (ETDEWEB)

Day, R C [Ontario Hydro, Tiverton, ON (Canada). Bruce Nuclear Generating Station-A

1997-12-31

In response to the discovery of the power pulse problem in March of 1993, Bruce A has installed flow straightening shield plugs in the inner zone channels of all units to partially reduce the gap and gain an increase in reactor power to 75%. After review and evaluation of solutions to manage the gap, including creep compensators and long fuel bundles, efforts have focused on a different solution involving reordering the fuel bundles to reverse the burnup profile. This configuration is maintained by fuelling with the flow and providing better support to the highly irradiated downstream fuel bundles by changing the design of the outlet shield plug. Engineering changes to the fuel handling control system and outlet shield plug are planned to be implemented starting in June 1996, thereby eliminating the power pulse problem and restrictions on reactor operating power. (author). 2 refs., 1 tab., 2 figs.

The Role of Problem Solving in Construction Management Practices

DEFF Research Database (Denmark)

Schultz, Casper Siebken

2012-01-01

industry. An Industrial PhD carried out at a large Danish contractor examined how failures and defects are produced and handled in the social practices of construction projects. The study addresses quality issues related to project management and examines the role of problem solving practices......Quality issues are a topic of continuous interest in the Danish construction industry. Not only can failures and defects be vital to the success of the single project but also the annual profits of the whole company can be put at risk. Moreover quality issues jeopardize the reputation of the entire......-dispositions regarding quality issues in the decision making and redressing of defects and failures in the processes. The role of problem solving and trouble-shooting is analysed through the well-organized processes of erecting the precast concrete structure and the chaotic processes of constructing the penthouse storey...

Emotion dysregulation and peer drinking norms uniquely predict alcohol-related problems via motives.

Science.gov (United States)

Simons, Raluca M; Hahn, Austin M; Simons, Jeffrey S; Murase, Hanako

2017-08-01

This study examined the relationships between emotion dysregulation, peer drinking norms, drinking motives, and alcohol-related outcomes among 435 college students. We examined the mediating roles of drinking motives when predicting alcohol consumption and related problems from the subscales of the Difficulties in Emotion Regulation Scale (DERS; Gratz and Roemer, 2004) via negative and positive reinforcement models. First, we hypothesized that individuals who lack in emotion regulation strategies or have difficulties in accepting negative emotions are more likely to drink to cope. Additionally, we hypothesized that individuals who act impulsively or become distracted when upset as well as those with higher peer drinking norms are more likely to drink for social and enhancement motives. The results of the path model indicated that limited access to emotion regulation strategies significantly predicted alcohol-related problems via both depression and anxiety coping motives, but did not predict alcohol consumption. Nonacceptance of emotional responses was not significantly associated with coping motives. Impulsivity had a significant direct relationship with alcohol problems. Difficulty in engaging in goal-directed behaviors predicted both enhancement and social motives, but only enhancement motives in turn predicted consumption. Norms indirectly predicted problems via enhancement motives and consumption. The results indicated that using alcohol to reduce negative or to increase positive emotions increases alcohol consumption and alcohol-related problems. Overall, results advance our understanding of the mechanisms of increased alcohol use and problems among college students. Copyright © 2017 Elsevier B.V. All rights reserved.

Getting to grips with remote handling and robotics

Energy Technology Data Exchange (ETDEWEB)

Mosey, D [Ontario Hydro, Toronto (Canada)

1984-12-01

A report on the Canadian Nuclear Society Conference on robotics and remote handling in the nuclear industry, September 1984. Remote handling in reactor operations, particularly in the Candu reactors is discussed, and the costs and benefits of use of remote handling equipment are considered. Steam generator inspection and repair is an area in which practical application of robotic technology has made a major advance.

Suppliers' activities within the controlled zones of licensees handling ionizing radiation sources. Recommendations

International Nuclear Information System (INIS)

1999-01-01

The Recommendations are intended to lay down a unified procedure for preparing licence applications related to ionizing radiation source handling, including the required documentation. The guidelines were set up based on documents of the Dukovany nuclear power plant and adapted to serve the Temelin nuclear power plant and other workplaces handling ionizing radiation sources as well. Selected provisions of applicable legislation are reproduced, and responsibilities are described. The major part of the publication is constituted by model documents, particularly a model Quality Assurance Programme. (P.A.)

The manager role in relation to the medical profession

OpenAIRE

Knorring, Mia von

2012-01-01

Background: Managers and physicians have two important roles in healthcare organisations. However, several studies have identified problems in the manager–physician relationship and more knowledge is needed to improve the situation. Using theories on organisation, professions, and role taking to inform thinking, this thesis addresses one aspect of the manager-physician relationship, namely how managers handle their role in relation to the medical profession. This was studied in the context of...

Handling knowledge on osteoporosis - a qualitative study

DEFF Research Database (Denmark)

Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim

2013-01-01

Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...

Personality-Related Problems and the Five-Factor Model of Personality

OpenAIRE

Boudreaux, Michael

2014-01-01

This research identifies a broad and inclusive set of personality-related problems and examines their empirical associations with both the high and low poles of the five-factor model of personality (FFM). McCrae, Widiger, and colleagues (e.g., McCrae, 1994; McCrae, Löckenhoff, & Costa, 2005; Widiger, Costa, & McCrae, 2002, 2012) have proposed that individuals with particular personality traits may be predisposed to particular kinds of problems in life, and suggested that the FFM serve as a ba...

Marijuana Effect Expectancies: Relations to Social Anxiety and Marijuana Use Problems

OpenAIRE

Buckner, Julia D.; Schmidt, Norman B.

2008-01-01

High social anxiety is related to marijuana problems, yet the nature of this relation remains unclear. We examined relations between marijuana effect expectancies, social anxiety, and marijuana among undergraduates (N=337). Social anxiety was related positively to negative expectancies and negatively to Tension Reduction Expectancies. Among socially anxious individuals, greater belief that marijuana produces cognitive/behavioral impairment was associated with greater marijuana use rates. Nega...

Problems relating to international transport of nuclear fuels

International Nuclear Information System (INIS)

Timm, U.E.

1985-01-01

Owing to the tremendous geographic distances between uranium deposits of interest, to the various degrees of sophistication of nuclear industry in industrialized countries and to the close international cooperation in the field of nuclear energy, safe international transports, physical protection and transport handling play an important role. It is suggested to better coordinate the activities of nuclear power plant operators, the nuclear industry and specialized transport companies with respect to all national and international issues of nuclear fuel transports. (DG) [de

Moisture and Home Energy Conservation: How to Detect, Solve and Avoid Related Problems.

Science.gov (United States)

National Center for Appropriate Technology, Butte, MT.

Moisture problems are identified as an important element in home energy conservation programs. A systematic approach to understanding, recognizing, solving, and preventing moisture-related problems is offered in this four-section report. Section I examines the root of moisture problems. Section II discusses symptoms and causes of excess moisture…

Christian – Muslim Relations in Nigeria: The Problems and Prospects

African Journals Online (AJOL)

Christian – Muslim Relations in Nigeria: The Problems and Prospects. ... Basic findings of this study show that Nigeria.s stability, democracy, and national ... must embrace Inter-religious dialogue which demands religions nurture, faith, trust, ...

Applications of Desensitization Procedures for School-Related Problems; A Review.

Science.gov (United States)

Prout, H. Thompson; Harvey, John R.

1978-01-01

A variety of desensitization and counterconditioning procedures have been utilized to deal with school-related problems. These procedures are reviewed with respect to applications for treating school phobia, test anxiety, and other academic anxieties. (Author)

The Meaning of Emotional Overinvolvement in Early Development: Prospective Relations with Child Behavior Problems

Science.gov (United States)

Khafi, Tamar Y.; Yates, Tuppett M.; Sher-Censor, Efrat

2015-01-01

Emotional Overinvolvement (EOI) in parents’ Five Minute Speech Samples (FMSS; Magaña-Amato, 1993) is thought to measure overconcern and enmeshment with one’s child. Although related to maladaptive outcomes in studies of adult children, FMSS-EOI evidences varied relations with behavior problems in studies with young children. These mixed findings may indicate that certain FMSS-EOI criteria reflect inappropriate and excessive involvement with adult children, but do not indicate maladaptive processes when parenting younger children. Thus, this study evaluated relations of each FMSS-EOI criterion with changes in child behavior problems from preschool to first grade in a community sample of 223 child-mother dyads (47.98% female; Mage_W1 = 49.08 months; 56.50% Hispanic/Latina). Maternal FMSS-EOI ratings were obtained at wave 1, and independent examiners rated child externalizing and internalizing behavior problems at wave 1 and two years later. Path analyses indicated that both the Self-Sacrifice/Overprotection (SSOP) and Statements of Attitude (SOAs) FMSS-EOI criteria predicted increased externalizing problems. In contrast, Excessive Detail and Exaggerated Praise were not related to child externalizing behavior problems, and Emotional Display was not evident in this sample. None of the FMSS-EOI criteria evidenced significant relations with internalizing behavior problems. Multigroup comparisons indicated that the effect of SOAs on externalizing behavior problems was significant for boys but not for girls, and there were no significant group differences by race/ethnicity. These findings point to the salience of SSOP and SOAs for understanding the developmental significance of EOI in early development. PMID:26147935

Development of Safe Food Handling Guidelines for Korean Consumers.

Science.gov (United States)

Kang, Hee-Jin; Lee, Min-Woo; Hwang, In-Kyeong; Kim, Jeong-Weon

2015-08-01

The purpose of this study was to develop guidelines for Korean consumers with regard to safe food handling practices at home by identifying current food handling issues. Korean consumers' behaviors regarding their safe food handling were identified via survey questionnaires that included items on individual hygiene practices, prepreparation steps when cooking, the cooking process, and the storage of leftover foods. The subjects were 417 Korean parents with elementary school children living in Seoul and Gyeonggi Province in the central area of Korea. The survey results revealed gaps between the knowledge or practices of Korean consumers and scientific evidence pertaining to safe food handling practices. Based on these findings, a leaflet on safe food handling guidelines was developed in accordance with Korean food culture. These guidelines suggest personal hygiene practices as well as fundamental principles and procedures for safe food handling from the stage of food purchase to that of keeping leftover dishes. A pilot application study with 50 consumers revealed that the guidelines effectively improved Korean consumers' safe food handling practices, suggesting that they can serve as practical educational material suitable for Korean consumers.

Normative Beliefs, Expectancies, and Alcohol-Related Problems among College Students; Implications for Theory and Practice.

Science.gov (United States)

Fearnow-Kenny, Melodie D.; Wyrick, David L.; Hansen, William B.; Dyreg, Doug; Beau, Dan B.

2001-01-01

Investigation (1) examined interrelations among normative beliefs, alcohol expectancies, and alcohol-related problems, and (2) investigated whether alcohol-related expectancies mediate associations between normative beliefs and alcohol-related problems. Analyses revealed that alcohol expectancies mediate the relationship between normative beliefs…

Systematic review of patient handling activities starting in lying, sitting and standing positions.

Science.gov (United States)

Hignett, Sue

2003-03-01

Over the last 20 years a number of methods have been recommended in professional guidelines for moving patients. This review was undertaken as it was recognized that there was a need for clinical work involving handling patients (systems of work and equipment) to be based on scientific evidence. The aim of this paper is to report the methodology, search strategy and results relating to work involving the care, treatment and transfer of patients starting in lying, sitting and standing positions. An unusual philosophical stance has been taken by appraising studies within a study type rather than comparatively. This facilitated the inclusion of a wide range of study designs (quantitative and qualitative). A string search was run on eight databases and supplemented by other search strategies. A published checklist was selected and inter-rater reliability established before the main review commenced. A systematic process for inclusion, exclusion, appraisal, extraction and synthesis was undertaken. Thirty-two studies were included: nine for activities with the patient starting in a lying position and 23 for the sitting position. No studies were found with respect to patient handling activities starting in a standing position. These data were synthesized into evidence statements. The evidence statements support the use of hoists (for nonweight bearing patients), standaids, sliding sheets (double thickness rollers), lateral transfer boards, walking belts and adjustable height beds and baths. It is suggested that these items should constitute a minimum equipment list for any clinical environment where patient handling takes place on a regular basis. The lack of research relating to patient handling in standing is of particular concern and it is recommended that this area should be a high research priority to address concerns about patient handling in rehabilitation activities.

Pharmacists' Intervention to Reduce Drug Related Problems in HIV ...

African Journals Online (AJOL)

Despite advances in the use of highly active antiretroviral therapy (HAART) in the management of HIV/AIDS, drug-related problems (DRPs) still remain an issue, particularly in developing countries. This study evaluated the incidence of DRPs among HIV/AIDS patients in a HIV/AIDS care centre in southern Nigeria and the ...

Environmental and safety aspects. The best of 'powder handling and processing' 1989 - 1997. 'Bulk solids handling' 1992 - 1997 (H/2000)

Energy Technology Data Exchange (ETDEWEB)

Woehlbier, R.H. (ed.)

2000-07-01

The book contains articles published either during 1992-1997 in ''bulk solids handling'' or during 1989-1997 in ''powder handling and processing''. Main topics are aspects of safety and environmental protection in bulk solids handling: dusts, hazardous powders, prevention and mitigation of dust explosions, powdered coal handling, dedusting, filters, electrostatic precipitation, materials recovery, occupational safety.(uke)

7 CFR 959.126 - Handling of culls.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling of culls. 959.126 Section 959.126 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements...) Handled for canning or freezing. (b) As a safeguard against culls entering fresh market channels each...

Survey of postharvest handling, preservation and processing ...

African Journals Online (AJOL)

Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

Handling uncertainty through adaptiveness in planning approaches

NARCIS (Netherlands)

Zandvoort, M.; Vlist, van der M.J.; Brink, van den A.

2018-01-01

Planners and water managers seek to be adaptive to handle uncertainty through the use of planning approaches. In this paper, we study what type of adaptiveness is proposed and how this may be operationalized in planning approaches to adequately handle different uncertainties. We took a

PREPD O and VE remote handling system

International Nuclear Information System (INIS)

Theil, T.N.

1985-01-01

The Process Experimental Pilot Plant (PREPP) at the Idaho National Engineering Laboratory is designed for volume reduction and packaging of transuranic (TRU) waste. The PREPP opening and verification enclosure (O and VE) remote handling system, within that facility, is designed to provide examination of the contents of various TRU waste storage containers. This remote handling system will provide the means of performing a hazardous operation that is currently performed manually. The TeleRobot to be used in this system is a concept that will incorporate and develop man in the loop operation (manual mode), standardized automatic sequencing of end effector tools, increased payload and reach over currently available computer-controlled robots, and remote handling of a hazardous waste operation. The system is designed within limited space constraints and an operation that was originally planned, and is currently being manually performed at other plants. The PREPP O and VE remote handling system design incorporates advancing technology to improve the working environment in the nuclear field

Harvesting and handling agricultural residues for energy

Energy Technology Data Exchange (ETDEWEB)

Jenkins, B.M.; Summer, H.R.

1986-05-01