WorldWideScience

Sample records for handling energized power

  1. Testable, fault-tolerant power interface circuit for normally de-energized loads

    International Nuclear Information System (INIS)

    Hager, R.E.

    1987-01-01

    A power interface circuit is described for supplying power from a power line to a normally de-energized process control apparatus in a pressurized light water nuclear power system in dependence upon three input signals, comprising: voter means for supplying power to the normally de-energized load when at least two of the three input signals indicate that the normally de-energized load should be activated; a normally closed switch, operatively connected to the power line and the voter means, for supplying power to the voter means during ordinary operation; a first resistor operatively connected to the power line; a current detector operatively connected to the first resistor and the voter means; a second resistor operatively connected to the current detector and ground; and current sensor means, operatively connected between the voter means and the normally de-energized load, for detecting the power supplied to the normally de-energized load by the voter means

  2. Assessing potential impacts of energized submarine power cables on crab harvests

    Science.gov (United States)

    Love, Milton S.; Nishimoto, Mary M.; Clark, Scott; McCrea, Merit; Bull, Ann Scarborough

    2017-12-01

    Offshore renewable energy facilities transmit electricity to shore through submarine power cables. Electromagnetic field emissions (EMFs) are generated from the transmission of electricity through these cables, such as the AC inter-array (between unit) and AC export (to shore) cables often used in offshore energy production. The EMF has both an electric component and a magnetic component. While sheathing can block the direct electric field, the magnetic field is not blocked. A concern raised by fishermen on the Pacific Coast of North America is that commercially important Dungeness crab (Metacarcinus magister Dana, 1852)) might not cross over an energized submarine power cable to enter a baited crab trap, thus potentially reducing their catch. The presence of operating energized cables off southern California and in Puget Sound (cables that are comparable to those within the arrays of existing offshore wind energy devices) allowed us to conduct experiments on how energized power cables might affect the harvesting of both M. magister and another commercially important crab species, Cancer productus Randall, 1839. In this study we tested the questions: 1) Is the catchability of crabs reduced if these animals must traverse an energized power cable to enter a trap and 2) if crabs preferentially do not cross an energized cable, is it the cable structure or the EMF emitted from that cable that deters crabs from crossing? In field experiments off southern California and in Puget Sound, crabs were given a choice of walking over an energized power cable to a baited trap or walking directly away from that cable to a second baited trap. Based on our research we found no evidence that the EMF emitted by energized submarine power cables influenced the catchability of these two species of commercially important crabs. In addition, there was no difference in the crabs' responses to lightly buried versus unburied cables. We did observe that, regardless of the position of the cable

  3. Mechanism of Occurring Over-Voltage Phenomena in Distributed Power System on Energization of Transformers

    Science.gov (United States)

    Nakachi, Yoshiki; Ueda, Fukashi; Kajikawa, Takuya; Amau, Tooru; Kameyama, Hirokazu; Ito, Hisanori

    This paper verifies the mechanism of occurring over voltage phenomena in the distributed power system on energizing the transformer. This over-voltage, which is observed at the actual distributed power system, with heavy inrush current is found to occur at about 0.1-0.2sec after the energizing and continue for a duration of more than 0.1[sec]. There is a concern that this over-voltage may operate the protection relay and deteriorate the insulation of apparatus. It is basically caused by the resonance between the shunt capacitors and saturated/unsaturated magnetizing inductance of transformer, system inductance. By using analytical formulation of a simple equivalent circuit, its mechanism has been verified through simulations carried out by using EMTP. Moreover, the sympathetic interaction between transformers is prolonged the duration of the over-voltage by the field test data is discussed in this paper.

  4. Energized Learning

    Science.gov (United States)

    college-level courses. The site includes lessons and activities that develop specific skills and knowledge that planning for an energy efficient future involves knowledge of science, mathematics, economics and skepticism about their predictive power. At the core of the Energized Leaning site is a interactive web-based

  5. Electrostatic precipitators for coal thermal power plants energized by means of narrow pulse voltage

    Energy Technology Data Exchange (ETDEWEB)

    Dinelli, G.; Mattachini, F.; Bogani, V.; Baldacci, A.; Tarli, R. (ENEL-CRTN, Direzione Studi e Ricerche, Milan (Italy) ENEL, VDT Settore Tecnico, Direzione Produzione e Trasmissione, Rome (Italy))

    1990-09-01

    The efficiency of electrostatic precipitators, widely used in thermal power plants to clean flue gases from solid particulate, is strongly dependent both on the way particles are electrically charged and on the characteristics of the electric field within the interelectrodic space of the precipitator. Such operating may become inadequate under varying particle characteristics and operating conditions of the thermal plant, therefore bringing to a reduction in the precipitator collection efficiency. An innovative technique, by generating a pulsed corona in the precipitator, allows a substantial improvement of both the particle charging and the collection processes and an increase in the operation flexibility of the electrostatic precipitator. The narrow pulse voltage energization has been extensively tested at a coal thermal unit having the electrostatic precipitators equipped with both conventional and pulse power sets. The long duration tests confirmed the following results: 1) high reliability of the pulse power sets and a considerable improvement in the precipitator collection efficiency; 2) a decrease in the particulate emissions, with coals whose ashes are of difficult collection, ranging between 75% and 85% of those with conventional energization; 3) a reduction by a factor of about 5 in the consumption of electric power by the electrostatic precipitation process.

  6. Spent fuel cask handling at an operating nuclear power plant

    International Nuclear Information System (INIS)

    Pal, A.C.

    1988-01-01

    The importance of spent fuel handling at operating nuclear power plants cannot be overstated. Because of its highly radioactive nature, however, spent fuel must be handled in thick, lead-lined containers or casks. Thus, all casks for spent fuel handling are heavy loads by the US Nuclear Regulatory Commission's definition, and any load-drop must be evaluated for its potential to damage safety-related equipment. Nuclear Regulatory Guide NUREG-0612 prescribes the regulatory requirements of alternative heavy-load-handling methodologies such as (a) by providing cranes that meet the requirements of NUREG-0554, which shall be called the soft path, or (b) by providing protective devices at all postulated load-drop areas to prevent any damage to safety-related equipment, which shall be called the hard path. The work reported in this paper relates to cask handling at New York Power Authority's James A. FitzPatrick (JAF) plant

  7. Risk handling in the power market

    International Nuclear Information System (INIS)

    Lindbaek-Nilsen, Brian; Strand, Krister

    2004-01-01

    In 1991 a new energy law was implemented in Norway. The Norwegian power market became deregulated and the law created a basis for a market based trade of electrical energy in Norway. In 1998 Nord Pool was founded and this has gradually become a common Nordic power exchange. The power market is characterized by large price fluctuations periodically. The reason is a variable resource supply and demand. In important factor in this context is that electricity cannot be stored after production. The large variations in supply and demand lead to large market risks for the involved parties. The derivate markets make hedging possible and thereby make it possible for the parties to guard against risks connected to future prices. This study presents risk elements in the power market, supplier and consumer sectors in view of the deregulation. In addition the present and future risk management is studied in with focus upon power suppliers that offer one-year fixed price contracts to the consumers. A study focuses on how a supplier may secure a certain volume of power in a year against price fluctuations in the market. As a basis the term market at Nord Pool is used and based on historical facts an estimated price for a supplier to eliminate the price risk for the volume is stipulated. This price is called the hedging cost and is compared with the offer a selection of power suppliers have for their one-year fixed price contracts. The possible difference between the two prices may be regarded as the power supplier risk price (premium) by offering these one-year fixed price contracts to the end consumers. The most surprising in the results in this study is how close the hedging costs are to the prices on the fixed price contracts. This means that compared to the hedging costs in the study the power suppliers operated with a small margin. Another tendency is that the fixed price contracts do not seem to have a high correlation to the hedging costs even if some companies follow the

  8. Fuel handling and storage systems in nuclear power plants

    International Nuclear Information System (INIS)

    1984-01-01

    The scope of this Guide includes the design of handling and storage facilities for fuel assemblies from the receipt of fuel into the nuclear power plant until the fuel departs from that plant. The unirradiated fuel considered in this Guide is assumed not to exhibit any significant level of radiation so that it can be handled without shielding or cooling. This Guide also gives limited consideration to the handling and storage of certain core components. While the general design and safety principles are discussed in Section 2 of this Guide, more specific design requirements for the handling and storage of fuel are given in detailed sections which follow the general design and safety principles. Further useful information is to be found in the IAEA Technical Reports Series No. 189 ''Storage, Handling and Movement of Fuel and Related Components at Nuclear Power Plants'' and No. 198 ''Guide to the Safe Handling of Radioactive Wastes at Nuclear Power Plants''. However, the scope of the Guide does not include consideration of the following: (1) The various reactor physics questions associated with fuel and absorber loading and unloading into the core; (2) The design aspects of preparation of the reactor for fuel loading (such as the removal of the pressure vessel head for a light water reactor) and restoration after loading; (3) The design of shipping casks; (4) Fuel storage of a long-term nature exceeding the design lifetime of the nuclear power plant; (5) Unirradiated fuel containing plutonium

  9. Blanket handling concepts for future fusion power plants

    International Nuclear Information System (INIS)

    Bogusch, E.; Gottfried, R.; Maisonnier, D.

    2003-01-01

    In the frame of the power plant conceptual studies (PPCS) launched by the European Commission, two main blanket handling concepts have been investigated with respect to engineering feasibility and the impact on the plant availability and on cost: the large module handling concept (LMHC) and the large sector handling concept (LSHC). The LMHC has been considered as the reference handling concept while the LSHC has been considered as an attractive alternative to the LMHC due to its potential of smaller replacement times and hence increasing the plant availability. Although no principle feasibility issue has been identified, a number of engineering issues have been highlighted for the LSHC that would require considerable efforts for their resolution. Since its availability of about 77% based on a replacement time for all the internals of about 4.2 months is slightly lower than for the LMHC, the LMHC remains the reference blanket replacement concept for a conceptual reactor

  10. Analysis of Two Electrocution Accidents in Greece that Occurred due to Unexpected Re-energization of Power Lines

    Directory of Open Access Journals (Sweden)

    Aikaterini D. Baka

    2014-09-01

    Full Text Available Investigation and analysis of accidents are critical elements of safety management. The over-riding purpose of an organization in carrying out an accident investigation is to prevent similar accidents, as well as seek a general improvement in the management of health and safety. Hundreds of workers have suffered injuries while installing, maintaining, or servicing machinery and equipment due to sudden re-energization of power lines. This study presents and analyzes two electrical accidents (1 fatal injury and 1 serious injury that occurred because the power supply was reconnected inadvertently or by mistake.

  11. Analysis of Two Electrocution Accidents in Greece that Occurred due to Unexpected Re-energization of Power Lines.

    Science.gov (United States)

    Baka, Aikaterini D; Uzunoglu, Nikolaos K

    2014-09-01

    Investigation and analysis of accidents are critical elements of safety management. The over-riding purpose of an organization in carrying out an accident investigation is to prevent similar accidents, as well as seek a general improvement in the management of health and safety. Hundreds of workers have suffered injuries while installing, maintaining, or servicing machinery and equipment due to sudden re-energization of power lines. This study presents and analyzes two electrical accidents (1 fatal injury and 1 serious injury) that occurred because the power supply was reconnected inadvertently or by mistake.

  12. A Comparison of Fishes and Invertebrates Living in the Vicinity of Energized and Unenergized Submarine Power Cables and Natural Sea Floor off Southern California, USA

    Directory of Open Access Journals (Sweden)

    Milton S. Love

    2017-01-01

    Full Text Available Increasing reliance on deep-water renewable energy has increased concerns about the effects of the electromagnetic fields (EMFs generated by submarine power cables on aquatic organisms. Off southern California, we conducted surveys of marine organisms living around energized and unenergized submarine power cables and nearby sea floor during 2012–2014 at depths between 76 and 213 m. In general, EMFs declined to background levels about one meter from the cable. We found no statistical difference in species composition between the fish assemblages along the energized and unenergized cables. The natural habitat community statistically differed from both energized and unenergized cable communities. Within species (or species groups, we found no differences in densities between energized and unenergized cables. Total fish densities were significantly higher around the cables than over the natural habitat. We found that invertebrate communities were structured by habitat type and depth and, similar to the fishes, there was no statistical difference between the energized and unenergized cables. Individually, the densities of four invertebrate species or species groups (Metridium farcimen, Luidia spp., unidentified black Crinoidea, and Urticina spp. differed between energized and unenergized cables, but this difference was not significant across all depth strata. The invertebrate community inhabiting the natural habitat strongly differed from the energized and unenergized cable community exhibiting the fewest species and individuals.

  13. Optimization of the JET Beryllium tile profile for power handling

    International Nuclear Information System (INIS)

    Nunes, I.; Vries, P. de; Lomas, P.J.; Loarte, A.

    2006-01-01

    The primary objective of the ITER-like wall project is to install a beryllium main wall and a tungsten divertor. From the point of view of plasma operations, the power handling properties of the new Be tiles may affect the operational space. The tiles design has to be such that it allows routine plasma operation for ITER relevant scenarios, i.e., 3-5 MA ELMy H-modes with high power input (P in > 30 MW) for lengths of time of ∼ 10 s. Due to the constrains imposed by heat conductivity, eddy current and stress torques on a Be tile, a single Be tile must be an assembly of castellated slices [Thompson V. et al, this conference]. From the point of view of plasma operations, the power handling properties of the new Be tiles can restrict the operational space of JET, if considerable melting of the tiles is to be avoided. This paper describes the power handling studies for the beryllium wall tiles and the optimisation of their design to achieve the operation goal described above. The melting temperature for Be is 1289 o C, corresponding to a energy limit of 60 MJ/m 2 for 10 s [Thompson V. et al, this conference]. For low field line angles, the power density on the toroidally facing surfaces is several times higher than the power density on the tile face requiring these to be shadowed. Furthermore the poloidally facing surfaces also have to be shadowed from assembly to assembly due to the large gap between assemblies. The tiles have been designed taking into account these limits and with a geometrical design such as to avoid exposed surfaces at high angles to the magnetic field being melted due to the expected loads. This has been achieved after detailed studies of the power handling of the various limiters and protections, including the effect of the curvature of the flux surfaces, shadowing and tolerance to misalignment. The surface of the tiles is defined such that, when possible, there is an even distribution of power density over the entire tile surface, and that

  14. Fuel handling solutions to power pulse at Bruce NGS A

    International Nuclear Information System (INIS)

    Day, R.C.

    1996-01-01

    In response to the discovery of the power pulse problem in March of 1993, Bruce A has installed flow straightening shield plugs in the inner zone channels of all units to partially reduce the gap and gain an increase in reactor power to 75%. After review and evaluation of solutions to manage the gap, including creep compensators and long fuel bundles, efforts have focused on a different solution involving reordering the fuel bundles to reverse the burnup profile. This configuration is maintained by fuelling with the flow and providing better support to the highly irradiated downstream fuel bundles by changing the design of the outlet shield plug. Engineering changes to the fuel handling control system and outlet shield plug are planned to be implemented starting in June 1996, thereby eliminating the power pulse problem and restrictions on reactor operating power. (author). 2 refs., 1 tab., 2 figs

  15. Fuel handling solutions to power pulse at Bruce NGS A

    Energy Technology Data Exchange (ETDEWEB)

    Day, R C [Ontario Hydro, Tiverton, ON (Canada). Bruce Nuclear Generating Station-A

    1997-12-31

    In response to the discovery of the power pulse problem in March of 1993, Bruce A has installed flow straightening shield plugs in the inner zone channels of all units to partially reduce the gap and gain an increase in reactor power to 75%. After review and evaluation of solutions to manage the gap, including creep compensators and long fuel bundles, efforts have focused on a different solution involving reordering the fuel bundles to reverse the burnup profile. This configuration is maintained by fuelling with the flow and providing better support to the highly irradiated downstream fuel bundles by changing the design of the outlet shield plug. Engineering changes to the fuel handling control system and outlet shield plug are planned to be implemented starting in June 1996, thereby eliminating the power pulse problem and restrictions on reactor operating power. (author). 2 refs., 1 tab., 2 figs.

  16. Energía financiera

    OpenAIRE

    Altuve G., José G.

    2016-01-01

    La energía financiera surge como consecuencia de la unión de los conceptos energía y financiera. La primera, como la acción a seguir en un momento del tiempo, y la segunda vinculada al manejo de variables tales como: Estructura financiera y su costo de capital y, las decisiones de inversión consideradas bajo riesgo. Si se armonizan estos dos aspectos estamos en presencia de la fusión de la energía y la administración financiera en dos de sus variables más importantes. Financial power arise...

  17. Grupos electrógenos y calidad de la energía; Reciprocating Machines and Power Quality

    Directory of Open Access Journals (Sweden)

    Marielys Francisco Fernández

    2011-02-01

    Full Text Available Entre las tecnologías de mayor difusión que hoy día se utilizan dentro de la generación distribuida (GDestán los grupos electrógenos (GE. La presencia de los GE en cualquiera de sus formas de explotación,exige un análisis de los problemas que puedan presentarse por su presencia; uno de estos problemas estárelacionado con la calidad de la energía eléctrica (CEL. El presente trabajo expone los primeros resultadosde un estudio que va dirigido a buscar respuestas sobre este tema ante diferentes tipos de perturbacionesque pueden presentarse en la red: Cortocircuito y variación de la tensión en los terminales del GE y ladesconexión súbita de la carga (rechazo de carga. Reciprocating machine (RM is one of the technology more used on distributed generation (DG. Thepresence of RM not manner its operation form need an analysis about differents problems: One of them isrelated with power quality (PQ. First results obained inside one study directed to obtain answers aboutdifferents perturbations for the RM presence like shortcircuit and voltage variation on RM termianls andrejected charge is presented in this paper. 

  18. Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems

    DEFF Research Database (Denmark)

    Choi, Uimin; Blaabjerg, Frede; Lee, Kyo-Beum

    2015-01-01

    Power electronics plays an important role in a wide range of applications in order to achieve high efficiency and performance. Increasing efforts are being made to improve the reliability of power electronics systems to ensure compliance with more stringent constraints on cost, safety......, and availability in different applications. This paper presents an overview of the major failure mechanisms of IGBT modules and their handling methods in power converter systems improving reliability. The major failure mechanisms of IGBT modules are presented first, and methods for predicting lifetime...... and estimating the junction temperature of IGBT modules are then discussed. Subsequently, different methods for detecting open- and short-circuit faults are presented. Finally, fault-tolerant strategies for improving the reliability of power electronic systems under field operation are explained and compared...

  19. Uso de la energía eólica dentro del concepto de generación distribuida y la calidad de la energía; Use of Wind Energy Inside Distributed Generation Concept and Power Quality

    Directory of Open Access Journals (Sweden)

    Enileys Guardado Pérez

    2011-02-01

    Full Text Available La conexión de los parques eólicos a las redes eléctricas presenta diversos problemas. Estos no solo sederivan de la naturaleza del elemento de conversión electromecánico de energía (la máquina asíncrona yde la característica aleatoria de la fuente de energía primaria (el viento, sino que tienen relación directatambién con las condiciones de la red y la calidad de la energía (CEL presente en la misma. Estosproblemas pueden tener diferente impacto dependiendo de las características de la red a la que estáconectado el parque: red aislada o sistema interconectado. En cualquier caso, la conexión de un PE a unared requiere la realización de estudios detallados tanto de régimen permanente como de régimen dinámicopara valorar con precisión su impacto. En el presente trabajo se hace un análisis de la presencia de los PEdentro de la generación distribuida (GD, su relación con la CEL, así como se presentan los primerosesfuerzos por analizar el comportamiento de las turbinas eólicas ante una de las perturbaciones másusuales que se presentan en la red eléctrica cubana: la variación de tensión.  Some problems could be present when a wind farm (WF is connected to one electric network. Theseproblems not be only related with the nature of electromechanical conversion of energy element or randomizenature of wind; they are too related with the really conditions of the network and power quality problems.The impact of these problems could be different depending of the electric network characteristics: isolated(islanding or connected network. Nevertheless the connection of WF to one electric network to evaluateits impact some studies about dynamic and stable states will be realized.One analysis about the presenceof WF inside distributed generation concept, its relations with power quality problems and some resultsobtained at CIPEL on performance of wind turbines considering one of the most perturbations in electriccuban system are

  20. Steady state and transient power handling in JET

    International Nuclear Information System (INIS)

    Matthews, G.F.

    2002-01-01

    Recent JET experiments and analysis have demonstrated the importance of edge collisionality for the physics of divertor power loading both during and between ELMs. Since collisionality decreases strongly with machine size, JET routinely operates in an ITER relevant regime which is difficult or impossible to access in smaller devices. This new understanding has enabled us to develop more physically justifiable scalings for static and transient power deposition in ITER and demonstrates a need for kinetic models when simulating edge behaviour in JET and ITER. Steady state power loading in ITER is likely to be within limits provided that the divertor plasma is kept in the high recycling or detached regime. Extrapolations of the typical type I ELMs found in JET to ITER highlight the importance of developing regimes characterised by small ELMs, if surface ablation is to be avoided. Disruptive power loads measured in the JET divertor appear far more benign than would be expected from current ITER assumptions. (author)

  1. Handling and raising analysis in nuclear power plants

    International Nuclear Information System (INIS)

    Rafer, J.-F.

    1981-01-01

    Cranes pose a safety problem essentially due to their concentration on nuclear power station work sites. A study is made of the various devices for preventing the occurence of collisions: electromechanical contacts, optical and phonic signals and microprocessors [fr

  2. Modern handling and monitoring concepts for nuclear power plants

    International Nuclear Information System (INIS)

    Hofmann, H.; Lochner, K.H.

    1989-01-01

    Advanced microprocessor technology offers new means and methods also to power plant operation to improve the man-machine interface by using VDU's for process control, thus enhancing plant safety and reliability. A future control-room concept involving operation and monitoring to be effected by means of VDU's exclusively, calls for a detailed knowledge of the requirements which are made by the process and the operator on the system, and for the application of a very powerful microprocessor technology. Visualization of operating and monitoring processes matched to the needs of operators should be possible at high functionality and display quality without substantial restrictions caused by the device technology used. (orig.) [de

  3. Handling power-asymmetry in interactions with infants

    DEFF Research Database (Denmark)

    Demuth, Carolin

    2013-01-01

    socio-cultural communities deal with power asymmetry in interactions with 3-months old infants. The study consists of a microanalysis of videotaped free play mother-infant interactions from 20 middle class families in Muenster, Germany and 20 traditional farming Nso families in Kikaikelaki, Cameroon...

  4. Steady state and transient power handling in JET

    International Nuclear Information System (INIS)

    Matthews, G.F.

    2003-01-01

    Steady state and transient power deposition profiles have been measured in the JET MIIGB divertor using improved diagnostics techniques involving the use of fast infra-red, thermocouples and Langmuir probe arrays. In unfuelled type I ELMy H-modes a very narrow power profile is observed at the outer target which we associate with the ion channel. Systematic parameter scans have been carried out and our analysis shows that the average power width scaling is consistent with a classical dependence of perpendicular transport in the SOL. Using the fast IR capability the factors such as rise time, broadening, variability and in/out asymmetry have been studied and lead to the conclusion that type I ELMs in ITER may fall just below the material ablation limits. JET disruptions are very different from type I ELMs in that only a small fraction of the thermal energy reaches the divertor and what does arrive is distributed uniformly over the divertor area. This is very different from the current ITER assumption which puts most of the energy from the thermal quench onto the divertor strike points. (author)

  5. Single Null Negative Triangularity Tokamak for Power Handling

    Science.gov (United States)

    Kikuchi, Mitsuru; Medvedev, S.; Takizuka, T.; Sauter, O.; Merle, A.; Coda, S.; Chen, D.; Li, J. X.

    2017-10-01

    Power and particle control in fusion reactor is challenge and we proposed the negative triangularity tokamak (NTT) to eliminate ELM by operating L-mode edge with improved core confinement. The SN configuration has more flexibility in shaping by adopting rectangular-shaped TF coils. The limiting normalized beta is 3.56 with wall stabilization and 3.14 without wall. The vertical stability is assured under a reasonable control system. The wetted area on the divertor plates becomes wider in proportion to the larger major radius at the divertor strike points due to the NT configuration. In addition to the major-radius effect, the ``Flux Tune Expansion (FTE)'' is adopted to further reduce the heat load on the divertor plate by factor of 2.6 with a coil current 3 MA. L-mode edge also allows further increase in wetted area. The fusion power of 3 GW is deliverable only at normalized beta 2.1. Therefore this reactor may be operable stably against the serious MHD activities. The CD power for SS operation is 175 MW at Q = 17. AC operation is also possible option. A required HH factor is relatively modest H = 1.12.

  6. Modern power station practice mechanical boilers, fuel-, and ash-handling plant

    CERN Document Server

    Sherry, A; Cruddace, AE

    2014-01-01

    Modern Power Station Practice, Second Edition, Volume 2: Mechanical (Boilers, Fuel-, and Ash-Handling Plant) focuses on the design, manufacture and operation of boiler units and fuel-and ash-handling plants.This book is organized into five main topics-furnace and combustion equipment, steam and water circuits, ancillary plant and fittings, dust extraction and draught plant, and fuel-and ash-handling plant.In these topics, this text specifically discusses the influence of nature of coal on choice of firing equipment; oil-burner arrangements, ignition and control; disposition of the heating surf

  7. Storage, handling and movement of fuel and related components at nuclear power plants

    International Nuclear Information System (INIS)

    1979-01-01

    The report describes in general terms the various operations involved in the handling of fresh fuel, irradiated fuel, and core components such as control rods, neutron sources, burnable poisons and removable instruments. It outlines the principal safety problems in these operations and provides the broad safety criteria which must be observed in the design, operation and maintenance of equipment and facilities for handling, transferring, and storing nuclear fuel and core components at nuclear power reactor sites

  8. Operators' arrangement for handling nuclear accidents at power plants

    International Nuclear Information System (INIS)

    Bertron, L.; Meclot, B.

    1986-01-01

    Given the preventive measures adopted by Electricite de France (EDF), the probability of a nuclear accident occurring in a power plant is extremely low but cannot, even so, be considered to be zero. The operator must therefore be prepared for this possibility. Apart from dealing with the consequences of the accident, the organization he sets up must fulfil the double objective of preventing any worsening of the accident and ensuring that the social, political and economic effects remain in proportion to the seriousness of the accident. The paper describes the organization set up by EDF in co-operation with the public authorities, indicating the concepts on which it is based and the logistical resources brought into play, in particular for telecommunications. Reports on the TMI incident showed that public telecommunications services can well be saturated in the event of an emergency. EDF, relying on the combined advantages of all transmission systems which the French Postal and Telecommunications Office can place at its disposal, as well as private networks with a concession from the Government, has taken the necessary precautions to deal with this problem. The organization is also designed to respond to the requirements of the media and the population at large for correct information. These systems are naturally all tested during training exercises which ensure that the organization as a whole can cope, in terms both of manpower and equipment, with a very improbable event. (author)

  9. Transport, acceptance, storage and handling of the itens of nuclear power plants

    International Nuclear Information System (INIS)

    1989-01-01

    The norm aiming to establish the requirements applied to workers or organizations which participate of the activities of transport, acceptance, storage and handling of important itens for safety of nuclear power plants, is presented. The established requirements treat of protection and control necessary to assure that the quality of important itens for safety be it preserved from the end of fabrication until their incorporation to nuclear power plant. (M.C.K.) [pt

  10. Experience of remote under water handling operations at Tarapur Atomic Power Station

    International Nuclear Information System (INIS)

    Agarwal, S.K.

    1990-01-01

    Each Refuelling outage of Tarapur Atomic Power Station Reactors involves a great deal of remote underwater handling operations using special remote handling tools, working deep down in the reactor vessel under about sixty feet of water and in the narrow confines of highly radioactive core. The remote underwater handling operations include incore and out of core sipping operations, fuel reloading or shuffling, uncoupling of control rod drives, replacement and shuffling of control blades, replacement of local power range monitors, spent fuel shipment in casks, retrieval of fallen or displaced fuel top guide spacers, orifices and their installation, underwater CCTV inspection of reactor internals, core verification, channelling and dechannelling of fuel bundles, inspection of fuel bundles and channels, unbolting and removal of old racks, installation of high density racks, removal and reinstallation of fuel support plugs and guide tubes, underwater cutting of irradiated hardware material and their disposal, fuel reconstitution, removal and reinstallation of system dryer separator etc.. The paper describes in brief the salient experience of remote underwater handling operations at TAPS especially the unusual problems faced and solved, by using special tools, employing specific techniques and by repeated efforts, patience, ingenuity and skills. (author). 10 figs

  11. Novel method to improve power handling capability for coplanar waveguide high-temperature superconducting filter

    Energy Technology Data Exchange (ETDEWEB)

    Satoh, K; Koizumi, D; Narahashi, S [NTT DoCoMo, Inc., 3-5 Hikari-no-oka, 239-8536 Yokosuka (Japan)

    2006-06-01

    This paper proposes a novel method to improve the power handling capability of a coplanar waveguide (CPW) high-temperature superconducting (HTS) filter. The noteworthy point of the proposed method is that it is based on the concept that the power handling capability is improved by reducing the maximum current density of the filter. Numerical investigations confirm that a CPW HTS filter using 66-{omega} characteristic impedance resonators (66-{omega} CPW HTSF) reduces the maximum current density compared to that using conventional 50-{omega} resonators (50-{omega} CPW HTSF). We fabricated 5-GHz band four-pole Chevyshev CPW HTSFs based on the proposed and conventional methods. The fabricated 66-{omega} CPW HTSF exhibited the third-order intercept point (TOI) of + 61 dBm while the 50-{omega} CPW HTSF exhibited the TOI of + 54 dBm, both at 60 K. These results indicate the effectiveness of the proposed method.

  12. Eficiencia de celdas generadoras de gases oxidantes alimentadas con energía eléctrica o solar Efficiency of oxidant gas generator cells powered by electricity or solar energy

    Directory of Open Access Journals (Sweden)

    Héctor Brust Carmona

    1998-02-01

    Full Text Available Las enfermedades causadas por microorganismos contaminantes del agua siguen siendo un grave problema en países como México. La cloración mediante gas cloro o compuestos de cloro es uno de los mejores métodos para tratar el agua destinada al consumo humano. Sin embargo, la dificultad en el manejo del gas cloro y la ineficiencia de los sistemas de dosificación de soluciones de hipoclorito, debida a factores sociopolíticos, económicos y culturales, a veces han restado utilidad a estos procedimientos de cloración, sobre todo en comunidades rurales alejadas y de difícil acceso. Por todo ello se han desarrollado tecnologías apropiadas para la desinfección del agua mediante la generación in situ de gases oxidantes (cloro y ozono a partir de la electrólisis de una solución de sal común, el llamado sistema MOGGOD. La evaluación simulada del sistema mediante un modelo hidráulico permitió calcular sus costos parciales y totales. Con alimentación del sistema mediante energía eléctrica de la red se obtuvo una eficiencia de 90% y se generaron en 10 horas gases suficientes para desinfectar cerca de 200 m³ de agua a un costo aproximado de N$ 8 (US$ 1,30. La celda electrolítica funciona también con energía eléctrica suministrada mediante célula fotoeléctrica, en cuyo caso los costos de inversión son mayores. El sistema alimentado con células fotovoltaicas puede estar justificado en comunidades aisladas que carecen de energía eléctrica pero que cuentan con un sistema de distribución de agua por gravedad.Diseases caused by microbial contaminants in drinking water continue to be a serious problem in countries like Mexico. Chlorination, using chlorine gas or chlorine compounds, is one of the best ways to treat drinking water. However, difficulties in handling chlorine gas and the inefficiency of hypochlorite solution dosing systems--due to sociopolitical, economic, and cultural factors--have reduced the utility of these chlorination

  13. Storage, handling and internal transport of radioactive materials (fuel elements excepted) in nuclear power plants

    International Nuclear Information System (INIS)

    1983-06-01

    The rule applies to storage and handling as well as to transport within the plant and to the exchange of - solid radioactive wastes, - liquid radioactive wastes, except for those covered by the rule KTA 3603, - radioactive components and parts which are planned to be mounted and dismounted until shutdown of the plant, - radioactive-contaminated tools and appliances, - radioactive preparations. The rule is to be applied within the fenced-in sites of stationary nuclear power plants with LWR or HTR including their transport load halls, as fas as these are situated so as to be approachable from the nuclear power station by local transport systems. (orig./HP) [de

  14. Core management and fuel handling for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

  15. Core management and fuel handling for nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2002-01-01

    This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

  16. Evaluation of the Total Cost of Ownership of Fuel Cell-Powered Material Handling Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Ramsden, T.

    2013-04-01

    This report discusses an analysis of the total cost of ownership of fuel cell-powered and traditional battery-powered material handling equipment (MHE, or more typically 'forklifts'). A number of fuel cell MHE deployments have received funding support from the federal government. Using data from these government co-funded deployments, DOE's National Renewable Energy Laboratory (NREL) has been evaluating the performance of fuel cells in material handling applications. NREL has assessed the total cost of ownership of fuel cell MHE and compared it to the cost of ownership of traditional battery-powered MHE. As part of its cost of ownership assessment, NREL looked at a range of costs associated with MHE operation, including the capital costs of battery and fuel cell systems, the cost of supporting infrastructure, maintenance costs, warehouse space costs, and labor costs. Considering all these costs, NREL found that fuel cell MHE can have a lower overall cost of ownership than comparable battery-powered MHE.

  17. Scoping studies of tritium handling in a tokamak experimental power reactor

    International Nuclear Information System (INIS)

    Cherdack, R.; Watson, J.S.; Clinton, S.D.; Fisher, P.W.

    1975-01-01

    Tritium handling techniques in an experimental fusion power reactor (EPR) are evaluated to determine the requirements of the system and to compare different equipment and techniques for meeting those requirements. Tritium process equipment is needed to (1) evacuate and maintain a vacuum in the plasma vessel and the neutral beam injectors, (2) purify and recycle tritium and deuterium for the plasma fuel cycle, (3) recover tritium from experimental breeding modules, and (4) provide tritium containment and atmospheric cleanup. A development program is outlined to develop and demonstrate the required techniques and equipment and to permit confident design of an EPR for operation by the mid-1980s

  18. The Organic Power Transistor: Roll-to-Roll Manufacture, Thermal Behavior, and Power Handling When Driving Printed Electronics

    DEFF Research Database (Denmark)

    Pastorelli, Francesco; Schmidt, Thomas Mikael; Hösel, Markus

    2016-01-01

    to drive large currents while handling the thermal aspects in operation together with other organic printed electronics technologies such as large area organic photovoltaics (OPV)[2] and large area electrochromic displays (EC).[3] We find especially that an elevated operational temperature is beneficial...... with respect to both transconductance and on/off ratio. We achieve high currents of up to 45mA at a temperature of 80 C with an on/ off ratio of 100 which is sufficient to drive large area organic electronics such as an EC device powered by OPV devices that we also demonstrate. Finally, we observe......We present flexible organic power transistors prepared by fast (20mmin1) roll-to-roll (R2R) flexographic printing[1] of the drain (D) and source (S) electrode structures directly on polyester foil. The devices have top gate architecture and were completed by spin coating or slot-die coating...

  19. A study on the simulation and fabrication of three phase multi function power flow controller energized by SMES

    International Nuclear Information System (INIS)

    Kim, A.R.; Kim, J.H.; Kim, H.J.; Kim, S.H.; Seong, K.C.; Park, M.; Yu, I.K.

    2007-01-01

    The harmonic current, which is generated by non-linear switching devices, flows into the utility network, and becomes one of the undesired reasons which lead to the voltage distortion. And voltage sag from sudden increasing loads is also one of the serious problems inside the utility network. In order to compensate these problems, the authors propose a certain active filter system, which includes an SMES coil for energy source. However, since SMES includes the superconducting magnetic coil, quenching problem caused by unexpected reasons is one of the significant factors of the performance of active filter. Finally, this paper shows the results of the analysis of the influences of the internal fault of SMES coil. And the result of the operation of a three-phase multi-function power flow controller for the internal fault of SMES coil is also demonstrated

  20. Safety and availability of the fuel handling system at Embalse nuclear power plant

    International Nuclear Information System (INIS)

    Santaliz, Jorge O.; Paredes, Juan A.

    1998-01-01

    The paper attempts the Fuel Handling (F/H) System maintenance and operating methodology at the Embalse Power Station. It doesn't refer to the F/H process, because it's common and well known by all the CANDU Stations. Instead of that, the presentation will be focused on people qualification, training and selection. Also the key subjects for a smooth and successful operation. Additionally will be remarked the human aspect and the role of the person in the organization. The safe and reliable operation of the CNE Fuel Handling System has been always target, supported by the operational experience. The accountability and fitness for the job were the main qualification for the crew members. They have very clear their role and the importance of equipment which they are operating or manipulating. The person who has greater experience and responsibility must struggle continuously to keep the safe and confident operation. Also we have to increase permanently our knowledge with a greater training and experience exchange with another CANDU 6 Station, like this Conference which let us to grow as persons and technicians. It also allows our utility to have access to other realities and work methods. (authors)

  1. Gas power plant with CO2 handling. A study of alternative technologies

    International Nuclear Information System (INIS)

    Bolland, Olav; Hagen, Roger I.; Maurstad, Ola; Tangen, Grethe; Juliussen, Olav; Svendsen, Hallvard

    2002-01-01

    The report documents a study which compares 12 different technologies for gas power plants with CO 2 handling. The additional costs in removing the CO 2 in connection with electricity production is calculated to at least 18-19 oere /kWh compared to conventional gas power production without CO 2 capture. The calculated extra costs are somewhat higher than previously published figures. The difference is mainly due to that the estimated costs for pipelines and injection system for CO 2 are higher than in other studies. The removal of CO 2 in connection with gas power production implies increased use of natural gas. The most developed technologies would lead to a procentual increase in the gas consumption per kWh electricity of 18-25%. Gas power plants based on the present technologies would have efficiencies in the size of 46-49%. The efficiency of power plants without CO 2 handling is supposed to be 58%. There is no foundation for pointing out a ''winner's' among the compared technologies in the study. The present available technologies excepted, there are no technology which stands out as better than the others from an economic viewpoint. Gas turbine with membrane based separation of oxygen from air (AZEP) has a potential for lower costs but implies challenging technological development and thence considerable technological risks. Two technologies, capture of carbon from natural gas previous to combustion and exhaust gas purification based on absorption, may be employed in 3 - 4 years. The other technologies require more development and maturing. Three of the technologies may be particularly interesting because hydrogen may be produced as a byproduct. Demonstration plant and choice of technology: 1) There is a limited need for demonstration plants with respect to technology development. 2) It is important for the technology development to be able to test various technologies in a laboratory or in a flexible pilot plant. 3) Many technologies and components may be

  2. Robust, Radiation Tolerant Command and Data Handling and Power System Electronics for SmallSats

    Science.gov (United States)

    Nguyen, Hanson Cao; Fraction, James

    2018-01-01

    In today's budgetary environment, there is significant interest within the National Aeronautics and Space Administration (NASA) to enable small robotic science missions that can be executed faster and cheaper than previous larger missions. To help achieve this, focus has shifted from using exclusively radiation-tolerant or radiation-hardened parts to using more commercial-off-the-shelf (COTS) components for NASA small satellite missions that can last at least one year in orbit. However, there are some portions of a spacecraft's avionics, such as the Command and Data Handling (C&DH) subsystem and the Power System Electronics (PSE) that need to have a higher level of reliability that goes beyond what is attainable with currently available COTS parts. While there are a number of COTS components that can withstand a total ionizing dose (TID) of tens or hundreds of kilorads, there is still a great deal of concern about tolerance to and mitigation of single-event effects (SEE).

  3. 30 CFR 75.705-2 - Repairs to energized surface high-voltage lines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Repairs to energized surface high-voltage lines... Repairs to energized surface high-voltage lines. An energized high-voltage surface line may be repaired... on power circuits with a phase-to-phase nominal voltage no greater than 15,000 volts; (3) Such...

  4. Power handling capability of Faraday rotation isolators for CO(2) laser radars.

    Science.gov (United States)

    Klein, C A; Dorschner, T A

    1989-03-01

    Faraday rotation isolators for CO(2) laser radars must be capable of handling substantial average power loads without degrading the beam quality or experiencing thermal runaway. For this reason, the semiconductorbased isolators, which are of promise for applications at 10.6 microm, must be cooled. This creates radial temperature gradients and, in conjunction with a nonuniform beam pattern, may lead to severe wavefront aberrations. It is the purpose of this paper to formulate simple procedures for assessing the impact of such aberrations in a cw regime and to provide a prescription on how to proceed in the context of designing or evaluating Faraday rotators for CO(2) laser systems. If it is a good approximation to describe the beam-induced temperature rise by means of a fourth-order even polynomial, the degradation in beam quality originates entirely from the quartic term deltaT(4)rho(4). Specifically, it is the spherical aberration factor S = deltaT(4) radicalvar[rho(4)] that best describes the combined impact of temperature profile and beam shape. The heat flow equation for cw-loaded, edge-cooled, or face-cooled cylindrical Faraday rotator elements can be formulated in a simple nondimensional manner, which demonstrates that (a) temperature variations causing optical distortion scale with betaP/K, i.e., linearly with the deposited power per unit path length and inversely with the thermal conductivity; (b) in a transmission mode of operation with edge cooling and no thermal runaway, the power handling capability is independent of the aperture diameter; and (c), in a double-pass reflection mode of operation that takes advantage of a face-cooled back surface, a significant reduction of the distortion requires Nusselt numbers of at least 10, which leads to a new figure of merit for characterizing the performance of Faraday rotator material candidates. Edge-cooled optical isolators described in the published literature then provide cases for exercising the formalism and

  5. Shrimp Feed Formulation via Evolutionary Algorithm with Power Heuristics for Handling Constraints

    Directory of Open Access Journals (Sweden)

    Rosshairy Abd. Rahman

    2017-01-01

    Full Text Available Formulating feed for shrimps represents a challenge to farmers and industry partners. Most previous studies selected from only a small number of ingredients due to cost pressures, even though hundreds of potential ingredients could be used in the shrimp feed mix. Even with a limited number of ingredients, the best combination of the most appropriate ingredients is still difficult to obtain due to various constraint requirements, such as nutrition value and cost. This paper proposes a new operator which we call Power Heuristics, as part of an Evolutionary Algorithm (EA, which acts as a constraint handling technique for the shrimp feed or diet formulation. The operator is able to choose and discard certain ingredients by utilising a specialized search mechanism. The aim is to achieve the most appropriate combination of ingredients. Power Heuristics are embedded in the EA at the early stage of a semirandom initialization procedure. The resulting combination of ingredients, after fulfilling all the necessary constraints, shows that this operator is useful in discarding inappropriate ingredients when a crucial constraint is violated.

  6. Preliminary concept design of the divertor remote handling system for DEMO power plant

    Energy Technology Data Exchange (ETDEWEB)

    Carfora, D., E-mail: dario.carfora@gmail.com [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland); ENEA/CREATE/University of Naples Federico II, 80125 Naples (Italy); Di Gironimo, G. [ENEA/CREATE/University of Naples Federico II, 80125 Naples (Italy); Järvenpää, J. [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Huhtala, K. [Tampere University of Technology, Korkeakoulunkatu 6, 33720 Tampere (Finland); Määttä, T.; Siuko, M. [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland)

    2014-11-15

    Highlights: • Concept design of the RH system for the DEMO fusion power plant. • Divertor Mover: Hydraulic telescopic boom concept design. An alternative solution to ITER rack and pinion divertor mover (CMM). • Divertor cassettes end effector studies. • Transportation cask conceptual studies and logistic. - Abstract: This paper is based on the remote maintenance system project (WPRM) for the demonstration fusion power reactor (DEMO). Following ITER, DEMO aims to confirm the capability of generating several hundred of MW of net electricity by 2050. The main objective of these activities is to develop an efficient and reliable remote handling (RH) system for replacing the divertor cassettes. This paper presents the preliminary results of the concept design of the divertor RH system. The proposed divertor mover is a hydraulic telescopic boom driven from the transportation cask through the maintenance tunnel of the reactor. The boom is divided in three sections of 4 m each, and it is driving an end-effector in order to perform the scheduled operations of maintenance inside the vacuum vessel. Two alternative design of the end effector to grip and manipulate the divertor cassette are also presented in this work. Both the concepts are hydraulically actuated, basing on the ITER previous studies. The divertor cassette end-effector consists of a lifting arm linked to the divertor mover, a tilting plate, a cantilever arm and a hook-plate. The main objective of this paper is to illustrate the feasibility of DEMO divertor remote maintenance operations.

  7. Conditioning and handling of tritiated wastes at Canadian nuclear power facilities

    International Nuclear Information System (INIS)

    Krochmalnek, L.S.; Krasznai, J.P.; Carney, M.

    1987-04-01

    Ontario Hydro operates a 10,000 MW capacity nuclear power system utilizing the CANDU pressurized heavy water reactor design. The use of D 2 O as moderator and coolant results in the production of about 2400 Ci of tritium per MWe-yr. As a result, there is significant Canadian experience in the treatment, handling, transport and storage of tritiated wastes. Ontario Hydro operates its own reactor waste storage site which includes systems for volume reduction, immobilization and packaging of wastes. In addition, a facility to remove tritium from heavy water is presently being commissioned at the Darlington nuclear site. This facility will generate tritiated liquid and solid waste that will have to be properly conditioned prior to storage or disposal. The nature of these various wastes and the processes/packaging required to meet storage/disposal criteria are judged to have relevance to investigations in fusion facility waste arisings. Experience to date, planned operational procedures and ongoing R and D in this area are described

  8. Challenges for Nordic power; How to handle the renewable electricity surplus

    Energy Technology Data Exchange (ETDEWEB)

    2010-11-15

    Almost two years after the EU Commission put forth the EUs 202020 Climate and Energy policy package, it is clear that the Nordic region may face investment in new renewable generation at levels that are unprecedented since the deregulation of the Nordic electricity market. This report explores the linkages between political choices and market dynamics on the basis of four scenarios for the Nordic Power Sector towards 2020 and 2030. The aim is to contribute to a common understanding of the market challenges and dynamics among different stakeholders: How do different policy and market drivers interact? What are the long-term implications for prices and the energy balance? And ultimately, what policy choices are available when it comes to handling the expected increase in renewable generation and the looming Nordic energy surplus. Econ Poeyry and THEMA Consulting Group have invited companies, industry organizations and government agencies to participate in the process to elaborate on the issues mentioned above. The participants have contributed through workshops, working groups and conferences. (Author)

  9. Management of radioactive waste in nuclear power: handling of irradiated graphite from water-cooled graphite reactors

    International Nuclear Information System (INIS)

    Anfimov, S.S.

    2001-01-01

    In this paper an radioactive waste processing of graphite from graphite moderated nuclear reactors at its decommissioning is discussed. Methods of processing of irradiated graphite are presented. It can be concluded that advanced methods for graphite radioactive waste handling are available nowadays. Implementation of these methods will allow to enhance environmental safety of nuclear power that will benefit its progress in the future

  10. Análisis de la calidad de la energía en un centro de cómputos Analysis of power quality on data center

    Directory of Open Access Journals (Sweden)

    Juan Antonio Suárez

    2013-04-01

    Full Text Available Este trabajo analiza el impacto que provoca, sobre los índices de calidad de la energía eléctrica, un número importante de cargas no lineales pertenecientes a un centro de cómputos y conectadas a una red trifásica. Se presenta una metodología computacional simple que puede ser utilizada para analizar los efectos provocados por cargas con índices importantes de distorsión. Distintos modelos de computadoras personales (PCs, monitores e impresoras fueron ensayados en laboratorio a los efectos de registrar las señales de corriente y sus principales parámetros eléctricos. Con estos resultados y con la asistencia del programa ATP (Alternative Transient Program se simularon modelos equivalentes de los equipos para evaluar los diferentes fenómenos que provocan los componentes armónicos de corriente. Los efectos de atenuación y diversidad son analizados considerando distintos escenarios: modelos de PCs idénticas pero en distintos regímenes de funcionamiento, PCs combinadas con monitores e impresoras. Se demuestra en las simulaciones que una importante mitigación natural de armónicos se produce debido a las variaciones en los índices de distorsión armónica de corrientes de los aparatos estudiados y a la propia impedancia de la línea de alimentación. Se han registrado en determinadas combinaciones de equipos reducciones del THD I del 14% y de un 40% en función de la relación reactancia inductiva-resistencia de la línea de alimentación. Los resultados simulados fueron contrastados con mediciones en el centro de cómputos de una empresa de servicios públicos, con 120 PCs distribuidas en una red trifásica. El seguimiento se realizó con un analizador de redes a lo largo de una semana, registrando corrientes de líneas, índices de distorsión de corrientes y tensiones con sus correspondientes componentes armónicos.This paper analyzes the impact it causes on the rates of electric power quality, a significant number of nonlinear

  11. Commissioning and maintenance experience of in-plant coal handling system of captive power plant at HWP, Manuguru (Paper No. 5.4)

    International Nuclear Information System (INIS)

    Murugappan, K.; Mohan Rao, A.C.; Sastry, M.S.N.

    1992-01-01

    For achieving a non-stop generation of power for a minimum period of one year can be a reality only if due importance is given to inplant coal handling system. The paper highlights the major commissioning and maintenance problem faced and corrective action taken for inplant coal handling system of the captive power plant at Heavy Water Plant, Manuguru. (author)

  12. Final Generic Environmental Impact Statement. Handling and storage of spent light water power reactor fuel. Volume 2. Appendices

    International Nuclear Information System (INIS)

    1979-08-01

    This volume contains the following appendices: LWR fuel cycle, handling and storage of spent fuel, termination case considerations (use of coal-fired power plants to replace nuclear plants), increasing fuel storage capacity, spent fuel transshipment, spent fuel generation and storage data, characteristics of nuclear fuel, away-from-reactor storage concept, spent fuel storage requirements for higher projected nuclear generating capacity, and physical protection requirements and hypothetical sabotage events in a spent fuel storage facility

  13. Evaluation of design and operation of fuel handling systems for 25 MW biomass fueled CFB power plants

    International Nuclear Information System (INIS)

    Precht, D.

    1991-01-01

    Two circulating fluidized bed, biomass fueled, 25MW power plants were placed into operation by Thermo Electron Energy Systems in California during late 1989. This paper discusses the initial fuel and system considerations, system design, actual operating fuel characterisitics, system operation during the first year and modifications. Biomass fuels handled by the system include urban/manufacturing wood wastes and agricultural wastes in the form of orchard prunings, vineyard prunings, pits, shells, rice hulls and straws. Equipment utilized in the fuel handling system are described and costs are evaluated. Lessons learned from the design and operational experience are offered for consideration on future biomass fueled installations where definition of fuel quality and type is subject to change

  14. TMI-2 [Three Mile Island Nuclear Power Station] fuel canister and core sample handling equipment used in INEL hot cells

    International Nuclear Information System (INIS)

    McConnell, J.W. Jr.; Shurtliff, W.T.; Lynch, R.J.; Croft, K.M.; Whitmill, L.J.; Allen, S.M.

    1987-01-01

    This paper describes the specialized remote handling equipment developed and used at the Idaho National Engineering Laboratory (INEL) to handle samples obtained from the core of the damaged Unit 2 reactor at Three Mile Island Nuclear Power Station (TM-2). Samples of the core were removed, placed in TMI-2 fuel canisters, and transported to the INEL. Those samples will be examined as part of the analysis of the TMI-2 accident. The equipment described herein was designed for removing sample materials from the fuel canisters, assisting with initial examination, and processing samples in preparation for detailed examinations. The more complex equipment used microprocessor remote controls with electric motor drives providing the required force and motion capabilities. The remaining components were unpowered and manipulator assisted

  15. Radiological safety aspects associated with the handling, storage and disposal of self power neutron detectors in TAPS - 3 and 4

    International Nuclear Information System (INIS)

    Parida, B.K.; Mudgal, B.; Ghadigoankar, V.R.; Niraj; Ashok; Pati, C.K.; Patil, P.M.; Pawar, S.K.; Varadhan, R.S.

    2006-01-01

    At Tarapur Atomic Power Station 3 and 4, 540 MWe Pressurised Heavy Water Reactors, core being large in size requires a continuous in core monitoring for local flux disturbances. Nearly 200 Self Powered Neutron Detectors (SPNDs) of the Straight Individually Replaceable (SIR) type are distributed in the reactor core. For purpose of reactor regulation and protection, cobalt SPNDs that have a prompt response for changes in power is used for in-core flux mapping, vanadium SPNDs that provide accurate measure of neutron flux, even though having slow response is used In core SPNDs are placed in Vertical Flux Units (VFU) and Horizontal Flux Units (HFUs). These SPNDs were to be replaced at regular intervals to meet the design intent. Cobalt SPNDs have dose rates of the order of 1000 Gy/h and the Mineral Insulated (MI) cables of Vanadium SPNDs have dose rates of the order of 100 Gy/h. So far 3 Cobalt SPNDs were removed from HFUs and are being stored in lead shielding inside spent fuel storage facility. These high active components were handled with meticulous planning with lowest exposures to the maintainers. Radiological safety aspects of handling and storage of SPNDs are discussed in this report. (author)

  16. 30 CFR 77.704-2 - Repairs to energized high-voltage lines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Repairs to energized high-voltage lines. 77.704... UNDERGROUND COAL MINES Grounding § 77.704-2 Repairs to energized high-voltage lines. An energized high-voltage... repairs will be performed on power circuits with a phase-to-phase nominal voltage no greater than 15,000...

  17. Assessment of X-point target divertor configuration for power handling and detachment front control

    Directory of Open Access Journals (Sweden)

    M.V. Umansky

    2017-08-01

    Full Text Available A study of long-legged tokamak divertor configurations is performed with the edge transport code UEDGE (Rognlien et al., J. Nucl. Mater. 196, 347, 1992. The model parameters are based on the ADX tokamak concept design (LaBombard et al., Nucl. Fusion 55, 053020, 2015. Several long-legged divertor configurations are considered, in particular the X-point target configuration proposed for ADX, and compared with a standard divertor. For otherwise identical conditions, a scan of the input power from the core plasma is performed. It is found that as the power is reduced to a threshold value, the plasma in the outer leg transitions to a fully detached state which defines the upper limit on the power for detached divertor operation. Reducing the power further results in the detachment front shifting upstream but remaining stable. At low power the detachment front eventually moves to the primary X-point, which is usually associated with degradation of the core plasma, and this defines the lower limit on the power for the detached divertor operation. For the studied parameters, the operation window for a detached divertor in the standard divertor configuration is very small, or even non-existent; under the same conditions for long-legged divertors the detached operation window is quite large, in particular for the X-point target configuration, allowing a factor of 5–10 variation in the input power. These modeling results point to possibility of stable fully detached divertor operation for a tokamak with extended divertor legs.

  18. Extremely low recycling and high power density handling in CDX-U lithium experiments

    International Nuclear Information System (INIS)

    Kaita, R.; Majeski, R.; Doerner, R.; Gray, T.; Kugel, H.; Lynch, T.; Maingi, R.; Mansfield, D.; Soukhanovskii, V.; Spaleta, J.; Timberlake, J.; Zakharov, L.

    2007-01-01

    The mission of the Current Drive eXperiment-Upgrade (CDX-U) spherical tokamak is to investigate lithium as a plasma-facing component (PFC). The latest CDX-U experiments used a combination of a toroidal liquid lithium limiter and lithium wall coatings applied between plasma shots. Recycling coefficients for these plasmas were deduced to be 30% or below, and are the lowest ever observed in magnetically-confined plasmas. The corresponding energy confinement times showed nearly a factor of six improvement over discharges without lithium PFC's. An electron beam (e-beam) for evaporating lithium from the toroidal limiter was one of the techniques used to create lithium wall coatings in CDX-U. The evaporation was not localized to the e-beam spot, but occurred only after the entire volume of lithium in toroidal limiter was liquefied. This demonstration of the ability of lithium to handle high heat loads can have significant consequences for PFC's in future burning plasma devices

  19. Remote handling of decentralized power generation plants; Fernwirken von dezentralen Energieerzeugungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, Michael [IDS GmbH, Ettlingen (Germany). Geschaeftsbereich Entwicklung-Prozessautomatisierung; Thomas, Ralf [IDS GmbH, Ettlingen (Germany). Bereich Business Development und Marketing

    2011-05-15

    The incresing number of decentral power generation systems requires new grid solutions, i.e. the so-called smart grids. One important function is the monitoring and control, e.g. of decentral PV, wind power and cogeneration systems. The data interfaces used are highly diverse and as a rule are taken from measuring and automation technology, i.e. they must be adapted to the data models and transmission procedures of remote control and guidance systems. A compact protocol gateway enables standardized control and diagnosis.

  20. Generic environmental impact statement on handling and storage of spent light water power reactor fuel. Appendices

    International Nuclear Information System (INIS)

    1978-03-01

    Detailed appendices are included with the following titles: light water reactor fuel cycle, present practice, model 1000MW(e) coal-fired power plant, increasing fuel storage capacity, spent fuel transshipment, spent fuel generation and storage data (1976-2000), characteristics of nuclear fuel, and ''away-from-reactor'' storage concept

  1. Application of the software system USS to nuclear power plant data handling

    International Nuclear Information System (INIS)

    Wellhausen, U.

    1979-01-01

    The Unified Software System (USS) has been used to establish a data bank of general, economic, and technical nuclear power plant data. On the basis of a test magnetic tape, the principal lay-out of the data bank is described and examples of searches are given. In conclusion an additional programme is presented for sorting numerial parameters in a certain order

  2. Accelerated Metastable Solid-liquid Interdiffusion Bonding with High Thermal Stability and Power Handling

    Science.gov (United States)

    Huang, Ting-Chia; Smet, Vanessa; Kawamoto, Satomi; Pulugurtha, Markondeya R.; Tummala, Rao R.

    2018-01-01

    Emerging high-performance systems are driving the need for advanced packaging solutions such as 3-D integrated circuits (ICs) and 2.5-D system integration with increasing performance and reliability requirements for off-chip interconnections. Solid-liquid interdiffusion (SLID) bonding resulting in all-intermetallic joints has been proposed to extend the applicability of solders, but faces fundamental and manufacturing challenges hindering its wide adoption. This paper introduces a Cu-Sn SLID interconnection technology, aiming at stabilization of the microstructure in the Cu6Sn5 metastable phase rather than the usual stable Cu3Sn phase. This enables formation of a void-free interface yielding higher mechanical strength than standard SLID bonding, as well as significantly reducing the transition time. The metastable SLID technology retains the benefits of standard SLID with superior I/O pitch scalability, thermal stability and current handling capability, while advancing assembly manufacturability. In the proposed concept, the interfacial reaction is controlled by introducing Ni(P) diffusion barrier layers, designed to effectively isolate the metastable Cu6Sn5 phase preventing any further transformation. Theoretical diffusion and kinetic models were applied to design the Ni-Cu-Sn interconnection stack to achieve the targeted joint composition. A daisy chain test vehicle was used to demonstrate this technology as a first proof of concept. Full transition to Cu6Sn5 was successfully achieved within a minute at 260°C as confirmed by scanning electron microscope (SEM) and x-ray energy dispersive spectroscopy (XEDS) analysis. The joint composition was stable through 10× reflow, with outstanding bond strength averaging 90 MPa. The metastable SLID interconnections also showed excellent electromigration performance, surviving 500 h of current stressing at 105 A/cm2 at 150°C.

  3. Highly radiative plasmas for local transport studies and power and particle handling in reactor regimes

    International Nuclear Information System (INIS)

    Hill, K.W.; Bell, M.G.; Budny, R.

    1999-01-01

    To study the applicability of artificially enhanced impurity radiation for mitigation of the plasma-limiter interaction in reactor regimes, krypton and xenon gases were injected into TFTR supershots and high-l i plasmas. At neutral beam injection (NBI) powers P B ≥ 30 MW, carbon influxes (blooms) were suppressed, leading to improved energy confinement and neutron production in both D and DT plasmas, and the highest DT fusion energy production (7.6 MJ) in a TFTR pulse. Comparisons of the measured radiated power profiles with predictions of the MIST impurity transport code have guided studies of highly-radiative plasmas in ITER. The response of the electron and ion temperatures to greatly increased radiative losses from the electrons was used to study thermal transport mechanisms. (author)

  4. Highly radiative plasmas for local transport studies and power and particle handling in reactor regimes

    International Nuclear Information System (INIS)

    Hill, K.W.; Bell, M.G.; Budny, R.

    2001-01-01

    To study the applicability of artificially enhanced impurity radiation for mitigation of the plasma-limiter interaction in reactor regimes, krypton and xenon gases were injected into TFTR supershots and high-l i plasmas. At neutral beam injection (NBI) powers P B ≤30MW, carbon influxes (blooms) were suppressed, leading to improved energy confinement and neutron production in both D and DT plasmas, and the highest DT fusion energy production (7.6 MJ) in a TFTR pulse. Comparisons of the measured radiated power profiles with predictions of the MIST impurity transport code have guided studies of highly-radiative plasmas in ITER. The response of the electron and ion temperatures to greatly increased radiative losses from the electrons was used to study thermal transport mechanisms. (author)

  5. Highly Radiative Plasmas for Local Transport Studies and Power and Particle Handling in Reactor Regimes

    International Nuclear Information System (INIS)

    Bell, M.G.; Bell, R.E.; Budny, R.; Bush, C.E.; Hill, K.W.

    1998-01-01

    To study the applicability of artificially enhanced impurity radiation for mitigation of the plasma-limiter interaction in reactor regimes, krypton and xenon gases were injected into the Tokamak Fusion Test Reactor (TFTR) supershots and high-l(subscript) plasmas. At neutral beam injection (NBI) powers P(subscript B) greater than or equal to 30 MW, carbon influxes (blooms) were suppressed, leading to improved energy confinement and neutron production in both deuterium (D) and deuterium-tritium (DT) plasmas, and the highest DT fusion energy production (7.6 MJ) in a TFTR pulse. Comparisons of the measured radiated power profiles with predictions of the MIST impurity transport code have guided studies of highly-radiative plasmas in the International Thermonuclear Experimental Reactor (ITER). The response of the electron and ion temperatures to greatly increased radiative losses from the electrons was used to study thermal transport mechanisms

  6. A Use Case Methodology to Handle Conflicting Controller Requirements for Future Power Systems

    DEFF Research Database (Denmark)

    Heussen, Kai; Uslar, Mathias; Tornelli, Carlo

    2015-01-01

    This paper proposes a standards based requirements elicitation and analysis strategy tailored for smart grid control structure development. Control structures in electric power systems often span across several systems and stakeholders. Requirements elicitation for such control systems therefore...... requires coordination across many stakeholders and it is challenging to achieve a consistent design. To enable an iterative and distributed development we suggest a conflict management approach as a modular element of the design strategy, focusing on conflict identification and tracing. The idea...

  7. Handling transmission limitations in the central power network; Haandtering av overfoeringsbegrensninger

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    From 1996, the Norwegian and Swedish power markets were joined and a common power exchange was established. The two countries deal differently with bottlenecks (transmission obstruction) in their central networks. This report compares methods for dealing with such bottlenecks and looks at the alternatives. It emphasises the efficiency of pricing and incentives and the possibility of exercising market power under the different methods. Norway uses a method of price regions, or bottleneck tax. Prices are determined for the various price regions so as to keep the power flow below specified bounds. A surplus region is assigned a lower price than a deficit region and the bottleneck tax is the difference in price between two such price regions. The Swedish system is based on a counter purchase concept. In his offer to the spotmarket, the supplier has bound himself to provide a certain amount to the current system price regardless of network limitations. Up-regulation means that he produces more than this amount. Down-regulation means that he is paid for supplying less than he had offered to the current system price. In up- or down-regulation, compensation is given as the difference between the system price and the price on the counter purchase market. The main conclusions are: (1) Counter purchase is unsuitable as the main strategy for Norway. (2) Counter purchase may be suitable with short-lived and unpredicted bottlenecks; price regions may be suitable for long-lasting and predicted bottlenecks. Time is a central factor. (3) Present-day models for bottleneck management in Norway and Sweden do not give the optimum short-term load distribution on the network. In general, the current Norwegian system works fairly well, although it might be worthwhile to consider a system that approaches node pricing. 3 refs., 34 figs., 3 tabs.

  8. Divertor Design and Physics Issues of Huge Power Handling for SlimCS Demo Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Asakura, N.; Hoshino, K.; Tobita, K.; Someya, Y.; Utoh, H.; Nakamura, M., E-mail: asakura.nobuyuki@jaea.go.jp [Japan Atomic Energy Agency, Rokkasho (Japan); Shimizu, K. [Japan Atomic Energy Agency, Naka (Japan); Takizuka, T. [Osaka University, Osaka (Japan)

    2012-09-15

    Full text: Power exhaust scenario for a 3 GW class fusion reactor with the ITER-size plasma has been developed with enhancing the radiation loss from seeding impurity. Transport of plasma, impurity and neutrals was simulated self-consistently, for the first time, under the Demo divertor condition using an integrated divertor simulation code SONIC. The total heat load, q{sub target}, was evaluated including radiation power load and neutral load, in addition to the plasma heat load. It was found that heat and particle diffusion coefficients significantly affect the plasma detachment. For the case of increasing the coefficients by the factor of two, peak q{sub target} is reduced from 18 MW/m{sup 2} to below the engineering design level of 10 MW/m{sup 2}, while the characteristic width of the heat flux at the midplane SOL increases slightly from 2.2 to 2.7 mm. It was also found that that enhancement of the local {chi} and D at the outer SOL affects a reduction in the peak q{sub target} near the separatrix. Effects of the divertor geometry such as the divertor leg were investigated. Outer divertor leg length was extended to 2.7 m, while the magnetic flux expansion at the target is reduced to a half compared to the reference case of 1.8 m. Large radiation volume is shifted further upstream from the target due to a reduction in T{sub e}. The peak q{sub target} decreases to 10 MW/m{sup 2} due to reduction in both the plasma heat load and the radiation power load. (author)

  9. Ergonomic requirements on computer-based information- and handling engineering in nuclear power plants

    International Nuclear Information System (INIS)

    Fassmann, W.

    2002-01-01

    This project provides regulatory authorities with a set of criteria for evaluating hybrid man-machine interfaces in nuclear power plant control rooms from a human factors point of view. Such standards are necessary for two reasons: (1) More and more computerised information and control systems have been and will be introduced in nuclear power plant control rooms. One possible result of this trend will be the creation of hybrid man machine interfaces which will provide both conventional and computer-based display and control devices. (2) Available rules and regulations do not contain detailed requirements on how to integrate both types of interface in such a way that plant operation by means of hybrid interfaces will be performed at least as reliably and safely as by means of conventional ones. To fill this gap, criteria and methods were developed which support practical checks of requirements to be applied to hybrid control rooms. This approach is based on state of the art methods and criteria in ergonomics. It makes it possible to analyse and to describe personnel's actions in a consistent and structured way in order to provide the information which is necessary for evaluating human reliability of task performance. Reliability can be evaluated with respect to - accuracy of required information on displays, - networking of tasks, - possibilities of interrupting and cancelling measures which have already been initiated, - possibility to carry out required manuel actions, - level of mental work-strain, - workload level, - probability of erroneous actions. This method is part of a catalogue of recommendations for evaluating hybrid nuclear power plant control rooms. The catalogue also contains recommendations for the design of computerised parts of the man-machine-interface. Application of these design recommendations will help create favourable conditions for an acceptable level of work-strain and for reliable task performance. (orig.) [de

  10. Integrated modelling of material migration and target plate power handling at JET

    International Nuclear Information System (INIS)

    Coster, D.P.; Bonnin, X.; Chankin, A.

    2005-01-01

    The complexity of the tokamak edge and scrape-off layer (SOL) region is such that extrapolation to ITER requires modelling to be pursued through the integration of a number of edge codes, each of which must be thoroughly tested against results from present day machines. This contribution demonstrates how the edge modelling effort at JET is focused on such an approach by considering two examples, target power loading and material erosion and migration, the understanding of which are crucial issues for ITER. (author)

  11. Situación actual del sector energético en España

    Directory of Open Access Journals (Sweden)

    Carlos J. Pardo Abad

    2001-01-01

    Full Text Available La energía es un sector clave de la economía española y está presente en todos los procesos productivos. El artículo analiza al sector en los últimos años con datos procedentes de varios organismos públicos, referidos tanto al balance energético general como a los sectores energéticos, las energías renovables, la política energética y las relaciones entre energía y medio ambiente. Características básicas del sector en nuestro país son el incremento del consumo de energía, la progresiva liberalización y las grandes inversiones en energías renovables, sobre todo la eólica. Energy is a key sector of the Spanish economy and it is in all productivo processes.This article analyses the sector in the last fewyears with data from some public agencies, referred to the power balance as well as to nuclear power, coal, oil, natural gas, renewable energies, power policy and the relationship between energy and environment. The main eatures of energy in Spain are the increase of consumption, the growing liberation and the big investments in renewable energies, above all the eolic one.

  12. Power handling of a segmented bulk W tile for JET under realistic plasma scenarios

    Science.gov (United States)

    Jet-Efda Contributors Mertens, Ph.; Coenen, J. W.; Eich, T.; Huber, A.; Jachmich, S.; Nicolai, D.; Riccardo, V.; Senik, K.; Samm, U.

    2011-08-01

    A solid tungsten divertor row has been designed for JET in the frame of the ITER-like Wall project (ILW). The plasma-facing tiles are segmented in four stacks of tungsten lamellae oriented in the toroidal direction. Earlier estimations of the expected tile performance were carried out mostly for engineering purposes, to compare the permissible heat load with the power density of 7 MW/m2 originally specified for the ILW as a uniform load for 10 s.The global thermal model developed for the W modules delivers results for more realistic plasma footprints: the poloidal extension of the outer strike point was reduced from the full lamella width of 62 mm to ⩾15 mm. Model validation is given by the experimental exposure of a 1:1 prototype stack in the ion beam facility MARION (incidence ˜6°, load E ⩽ 66 MJ/m2 on the wetted surface). Spreading the deposited energy by appropriate sweeping over one or several stacks in the torus is beneficial for the tungsten lamellae and for the support structure.

  13. Management of radioactive waste in nuclear power: handling of irradiated graphite from water-cooled graphite reactors

    International Nuclear Information System (INIS)

    Anfimov, S.S.

    2000-01-01

    advanced methods for graphite rad-waste handling are available today. Implementation of these methods will allow enhancement of environmental safety of nuclear power (authors)

  14. Micro-supercapacitors based on interdigital electrodes of reduced graphene oxide and carbon nanotube composites with ultrahigh power handling performance

    Energy Technology Data Exchange (ETDEWEB)

    Beidaghi, Majid; Wang, Chunlei [Department of Mechanical and Materials Engineering, Florida International University, 10555 W. Flagler St., EC 3463, FL 33174 (United States)

    2012-11-07

    A novel method for fabricating micro-patterned interdigitated electrodes based on reduced graphene oxide (rGO) and carbon nanotube (CNT) composites for ultra-high power handling micro-supercapacitor application is reported. The binder-free microelectrodes were developed by combining electrostatic spray deposition (ESD) and photolithography lift-off methods. Without typically used thermal or chemical reduction, GO sheets are readily reduced to rGO during the ESD deposition. Electrochemical measurements show that the in-plane interdigital design of the microelectrodes is effective in increasing accessibility of electrolyte ions in-between stacked rGO sheets through an electro-activation process. Addition of CNTs results in reduced restacking of rGO sheets and improved energy and power density. Cyclic voltammetry (CV) measurements show that the specific capacitance of the micro-supercapacitor based on rGO-CNT composites is 6.1 mF cm{sup -2} at 0.01 V s{sup -1}. At a very high scan rate of 50 V s{sup -1}, a specific capacitance of 2.8 mF cm{sup -2} (stack capacitance of 3.1 F cm{sup -3}) is recorded, which is an unprecedented performance for supercapacitors. The addition of CNT, electrolyte-accessible and binder-free microelectrodes, as well as an interdigitated in-plane design result in a high-frequency response of the micro-supercapacitors with resistive-capacitive time constants as low as 4.8 ms. These characteristics suggest that interdigitated rGO-CNT composite electrodes are promising for on-chip energy storage application with high power demands. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Ubicación óptima de generación distribuida en sistemas de energía eléctrica Optimal placement of distributed generation in electric power system

    Directory of Open Access Journals (Sweden)

    Jesús María López–Lezama

    2009-06-01

    Full Text Available En este artículo se presenta una metodología para la ubicación óptima de generación distribuida en sistemas de energía eléctrica. Las barras candidatas para ubicar la generación distribuida son identificadas basándose en los precios marginales locales. Estos precios son obtenidos al resolver un flujo de potencia óptimo (OPF y corresponden a los multiplicadores de Lagrange de las ecuaciones de balance de potencia activa en cada una de las barras del sistema. Para incluir la generación distribuida en el OPF, ésta se ha modelado como una inyección negativa de potencia activa. La metodología consiste en un proceso no lineal iterativo en donde la generación distribuida es ubicada en la barra con el mayor precio marginal. Se consideraron tres tipos de generación distribuida: 1 motores de combustión interna, 2 turbinas a gas y 3 microturbinas. La metodología propuesta es evaluada en el sistema IEEE de 30 barras. Los resultados obtenidos muestran que la generación distribuida contribuye a la disminución de los precios nodales y puede ayudar a solucionar problemas de congestión en la red de transmisión.This paper presents a methodology for optimal placement of distributed generation (DG in electric power system. The candidate buses for DG placementare identified on the bases of locational marginal prices. These prices are obtained by solving an optimal power flow (OPF and correspond to the Lagrange multipliers of the active power balance equations in every bus of the system.In order to consider the distributed generation in the OPF model, the DG was modeled as a negative injection of active power. The methodology consists ofa nonlinear iterative process in which DG is allocated in the bus with the highest locational marginal price. Three types of DG were considered in the model: 1 internal combustion engines, 2 gas turbines and 3 microturbines.The proposed methodology is tested on the IEEE 30 bus test system. The results obtained

  16. Proyecto de vivienda energéticamente sostenible situada en Almería. Instalación fotovoltaica.

    OpenAIRE

    CORBERÁ FERRANDO, JOSÉ Mª

    2015-01-01

    [ES] Se van a diseñar las instalaciones necesarias para que una vivienda unifamiliar sea energéticamente sostenible. La única fuente de energía disponible es la solar Se calcualrán las instalaciones para dos opciones. 1. Vivienda conectada a la red eléctrica general. 2. Vivienda aislada de la red eléctrica. Corberá Ferrando, JM. (2015). Proyecto de vivienda energéticamente sostenible situada en Almería. Instalación fotovoltaica. http://hdl.handle.net/10251/53541. TFGM

  17. Hacia un indicador de consumo de energía eléctrica más efectivo en hoteles del grupo Cubanacán de la provincia de Camagüey; Toward an indicator of more effective electric power consumption in hotels of the Cubanacan company in Camagüey

    Directory of Open Access Journals (Sweden)

    Davel Borges Vasconcellos

    2011-05-01

    Full Text Available La consideración de indicadores de consumo reales es un elemento indispensable para la correcta evaluación de la eficiencia energética de una empresa. No todos los indicadores actuales que utilizan las instalaciones hoteleras son adecuados para los fines propuestos. El trabajo expone los efectos que tienen en el consumo de energía eléctrica, factores como la temperatura ambiente de la época del año y el tipo de segmento turístico (internacional o nacional, a través de un estudio de caso en el Hotel Caracol. La veracidad de los resultados ha sido comprobada en los cuatro hoteles del Grupo Cubanacán de la provincia de Camagüey. Los estudios de correlación entre el consumo de energía eléctrica y el nivel de actividad (habitaciones días ocupadas teniendo en cuenta el efecto de estos factores, permiten llegar a plantear un indicador de consumo de energía eléctrica más efectivo para evaluar la eficiencia energética en las instalaciones hoteleras. Finalmente comentamos el efecto de estos factores en otros indicadores de consumo.  The consideration of real consumption indicators is an indispensable element for the correct evaluation of the energy efficiency of a company. Not all the current indicators that use the hotel facilities are appropriate for this purpose.The paper presents factors, such as the ambient temperature and the type of tourist segment (international or national, that influence in electric power consumption, through a case study in the Caracol Hotel. The truthfulness of the results has been checked in the four hotels of the Cubanacan Company of Camagüey. The correlation studies between the electric power consumption and the activity level (rooms occupied days keeping in mind the effect of these factors, they allow to end up outlining an indicator of more effective electric power consumption to evaluate the energy efficiency in the hotel facilities. Finally we comment the effect of these factors in other

  18. Evaluación energética de un sistema de generación de 400 kWe en modo diesel‐gas licuado de petróleo//Energy analysis of a 400 kWe power system operated on dual fuel mode with diesel‐liquefied petroleum gas

    Directory of Open Access Journals (Sweden)

    Carlos‐A. Forero-Núñez

    2014-08-01

    Full Text Available El constante aumento en los precios de los combustibles impulsó el desarrollo de sistemas energéticos cada vez más eficientes y flexibles, los cuales permitan el uso de distintos tipos de combustibles, tales como el gas licuado de petróleo (GLP. El presente trabajo buscó analizar el comportamiento energético y ambiental que tiene una planta de generación de 400 kWe operada en modo diesel y dual diesel-GLP de pozo. La eficiencia energética total del sistema en el punto de máxima carga fue igual a 39,9 % en modo diesel y 35,1 % con una relación de sustitución del 28,5 % en modo dual. La adición de GLP resultó en una disminución del índice de emisiones de CO2 de 0,76 a 0,71 kgkWh-1. El adecuado comportamiento del sistema genera interesantes oportunidades para la disminución del impacto ambiental causado por los sistemas diesel, la diversificación de la canasta energética y la reducción de costos de generación eléctrica en pozos petroleros.Palabras claves: eficiencia energética, diesel, GLP, modo dual.________________________________________________________________________________AbstractThe continuous increase of the fuel costs promoted the development of more efficient and flexible power systems, which could use alternative fuels such as liquefied petroleum gas (LPG. This work aimed to analyze the performance and environmental effect of a 400kWe power system fed with diesel and diesel-LGP on a dual fuel mode. The total electric efficiency of this system at his maximum load was 39,9 % with diesel and 35,1 % at a 28,5 % substitution level on a dual fuel mode. The addition of LPG decreased the CO2 emission index from 0,76 to 0,71 kgkWh-1. The proper behavior of this system on a dual fuel mode mitigated the environmental impact of diesel internal combustion engines, diversified the energy market, and reduced the power generation costs onto petroleum extraction wells.Key words: energy efficiency, diesel, LPG, dual fuel mode.

  19. Energizing Learning: The Instructional Power of Conflict

    Science.gov (United States)

    Johnson, David W.; Johnson, Roger T.

    2009-01-01

    Although intellectual conflict may be an important instructional tool (because of its potential constructive outcomes), conflict is rarely structured in instructional situations (because of its potential destructive outcomes). Many educators may be apprehensive about instigating intellectual conflict among students because of the lack of…

  20. Risk assessment related to manual handling on choosen work possition in foundry Alstom Power Sp. z o. o.

    Directory of Open Access Journals (Sweden)

    G. Kowal

    2010-04-01

    Full Text Available Manual handling remains one of the different types of transport inside working place, although technological progress and modernorganization of work. Manual transport as a transport inside working place is related to foundry industry. According to polish lawregulations employer has to give consideration to manual handling in professional risk assessment and introduce actions for manualhandling reduction. In Foundry Elblag case there is found that in many processes manual handling are made by workers. For example wecan choose melting processes (additives manual feeding, mixing and pulling metallurgical slag, etc. or fettling processes like grinding.Objective of that analysis was to define level of risk related to manual handling in work stand chosen and define activities impacted onrisk assessment result with biggest range. For risk reduction, technical and organizational solutions were shown (better ergonomically work stand, method of work and worker’s awareness about good practices. In this study methods related to manual handling risk assessment were described, focus on KIM method used in Foundry Elblag. Key Item Method allow to estimate the risk by simple calculation based on key indicators (time rating points, rating points of mass, posture or work condition. Points were chosen based on timekeeping, information from workers and foreman.

  1. Modelación energética y operacional del sistema de agua de alimentar caldera de una central termoeléctrica; Modeling energetic and operational of the boiler feed water system of a power plant

    Directory of Open Access Journals (Sweden)

    Ernesto Miguel Solís Alemán

    2015-09-01

    Full Text Available Se propone un modelo combinado basado en la implementación paralela de dos aproximadores funcionales, utilizando una red neuronal del tipo (MLP y una regresión estadística, para la obtención de las características energéticas y de operación actual del Sistema de Agua de Alimentar Caldera (SAAC en una Central Termoeléctrica (CTE, en la cual se regula el flujo de agua a la caldera por variación de velocidad. La respuesta del modelo combinado se obtiene a partir de la suma ponderada de cada aproximador funcional. Dicho modelo es utilizado para relacionar el consumo de corriente y la posición del variador de velocidad, en función de la presión de descarga y el flujo entregado por cada bomba del SAAC. Para el ajuste de los modelos se utilizan mediciones almacenadas en el archivo histórico del sistema SCADA, donde se aplica un método de procesamiento de datos para eliminar ruidos que pueden afectar el ajuste de los modelos propuestos.Is proposed a combined model based on the parallel implementation of two functional approximators, using a neural network of the type (MLP and a statistical regression to obtain the actual energetic and operation characteristics of the Boiler Feed Water System (BFWS in a Power Plant, in which the water flow to the boiler is controlled by variation speed. The response of the combined model is obtained from the weighted sum of each functional approximator. This model is used to relate the current consumption and the position of the speed variator, in function of the discharge pressure and flow delivered by each pump of the BFWS. For the fit of the models is used save measurements of the historical file of the SCADA system, where is applied a data processing method to eliminating noise that can affect the fit of the models proposed.

  2. Final Generic Environmental Impact Statement. Handling and storage of spent light water power reactor fuel. Volume 1. Executive summary and text

    International Nuclear Information System (INIS)

    1979-08-01

    The Generic Environmental Impact Statement on spent fuel storage was prepared by the Nuclear Regulatory Commission staff in response to a directive from the Commissioners published in the Federal Register, September 16, 1975 (40 FR 42801). The Commission directed the staff to analyze alternatives for the handling and storage of spent light water power reactor fuel with particular emphasis on developing long range policy. Accordingly, the scope of this statement examines alternative methods of spent fuel storage as well as the possible restriction or termination of the generation of spent fuel through nuclear power plant shutdown. Volume 1 includes the executive summary and the text

  3. Ways of solving the problems of radiation safety and environmental protection in handling radioactive waste at atomic power stations in the USSR

    International Nuclear Information System (INIS)

    Gusev, D.I.; Belitskij, A.S.; Turkin, A.D.; Kozlov, V.M.

    1977-01-01

    Requirements of the State Sanitary Supervision on radiation safety of the personnel and population and on protection of the environment in handling radioactive wastes from nuclear power stations in the USSR are regulated by the Standards of Radiation Safety, the Main Sanitary Rules for Handling Radioactive Materials and by the Sanitary Rules for Designing Nuclear Power Stations. The regulations contained in these documents are obligatory for all the establishments at the stages of design, building and operation of nuclear power stations. The main requirement for handling radioactive wastes from nuclear power stations in the USSR is to dispose of them near the place of their production. In nuclear power station siting and designing the special territory is provided for liquid and solid radioactive wastes storage taking into account the whole period of nuclear power station operation. These storage sites are located within the controlled area. They are built as required, usually for five years. The report contains hygienic and hydrological requirements to the radiation waste burial sites and data on the accepted system of controlling leak-proof qualities of the disposal cavities and radioactivity of the ground water in this region. The results of long-term studies on radionuclide leaching from the bituminic blocks are given and it is shown that the bituminizing method used for solidification of intermediate activity wastes is very promising. In the USSR much attention is given to the problem of sanitary protection of the cooling ponds at nuclear power stations. No limits to the national-economic use of these ponds outside the nuclear power station site are established. Therefore in determining the requirements to the discharge of effluents into the cooling ponds of nuclear power stations the possibility of radionuclide transfer to the population through the aquaeous and terrestrial biological chains is taken into account. The possibility of human diet contamination

  4. Recent history of sediment metal contamination in Lake Macquarie, Australia, and an assessment of ash handling procedure effectiveness in mitigating metal contamination from coal-fired power stations

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Larissa, E-mail: Larissa.Schneider@canberra.edu.au [Institute for Applied Ecology, University of Canberra, Canberra, ACT 2601 (Australia); Maher, William [Institute for Applied Ecology, University of Canberra, Canberra, ACT 2601 (Australia); Potts, Jaimie [New South Wales Office of Environmental and Heritage, Lidcombe, NSW, 2141 Australia (Australia); Gruber, Bernd [Institute for Applied Ecology, University of Canberra, Canberra, ACT 2601 (Australia); Batley, Graeme [CSIRO Land and Water, Lucas Heights, NSW 2234 (Australia); Taylor, Anne [Institute for Applied Ecology, University of Canberra, Canberra, ACT 2601 (Australia); Chariton, Anthony [CSIRO Land and Water, Lucas Heights, NSW 2234 (Australia); Krikowa, Frank [Institute for Applied Ecology, University of Canberra, Canberra, ACT 2601 (Australia); Zawadzki, Atun; Heijnis, Henk [Institute for Environmental Research, Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW 2234 (Australia)

    2014-08-15

    This study assessed historical changes in metal concentrations in sediments of southern Lake Macquarie resulting from the activities of coal-fired power stations, using a multi-proxy approach which combines {sup 210}Pb, {sup 137}Cs and metal concentrations in sediment cores. Metal concentrations in the lake were on average, Zn: 67 mg/kg, Cu: 15 mg/kg, As: 8 mg/kg, Se: 2 mg/kg, Cd: 1.5 mg/kg, Pb: 8 mg/kg with a maximum of Zn: 280 mg/kg, Cu: 80 mg/kg, As: 21 mg/kg, Se: 5 mg/kg, Cd: 4 mg/kg, Pb: 48 mg/kg. The ratios of measured concentrations in sediment cores to their sediment guidelines were Cd 1.8, As 1.0, Cu 0.5, Pb 0.2 and Zn 0.2, with the highest concern being for cadmium. Of special interest was assessment of the effects of changes in ash handling procedures by the Vales Point power station on the metal concentrations in the sediments. Comparing sediment layers before and after ash handling procedures were implemented, zinc concentrations have decreased 10%, arsenic 37%, selenium 20%, cadmium 38% and lead 14%. An analysis of contaminant depth profiles showed that, after implementation of new ash handling procedures in 1995, selenium and cadmium, the main contaminants in Australian black coal had decreased significantly in this estuary. - Highlights: • The main sources of metals to Southern Lake Macquarie are coal-fired power stations. • The metal of highest concern in this estuary is cadmium. • Arsenic was mobile in sediments. • Selenium and cadmium decreased in sediments following new ash handling procedures.

  5. Recent history of sediment metal contamination in Lake Macquarie, Australia, and an assessment of ash handling procedure effectiveness in mitigating metal contamination from coal-fired power stations

    International Nuclear Information System (INIS)

    Schneider, Larissa; Maher, William; Potts, Jaimie; Gruber, Bernd; Batley, Graeme; Taylor, Anne; Chariton, Anthony; Krikowa, Frank; Zawadzki, Atun; Heijnis, Henk

    2014-01-01

    This study assessed historical changes in metal concentrations in sediments of southern Lake Macquarie resulting from the activities of coal-fired power stations, using a multi-proxy approach which combines 210 Pb, 137 Cs and metal concentrations in sediment cores. Metal concentrations in the lake were on average, Zn: 67 mg/kg, Cu: 15 mg/kg, As: 8 mg/kg, Se: 2 mg/kg, Cd: 1.5 mg/kg, Pb: 8 mg/kg with a maximum of Zn: 280 mg/kg, Cu: 80 mg/kg, As: 21 mg/kg, Se: 5 mg/kg, Cd: 4 mg/kg, Pb: 48 mg/kg. The ratios of measured concentrations in sediment cores to their sediment guidelines were Cd 1.8, As 1.0, Cu 0.5, Pb 0.2 and Zn 0.2, with the highest concern being for cadmium. Of special interest was assessment of the effects of changes in ash handling procedures by the Vales Point power station on the metal concentrations in the sediments. Comparing sediment layers before and after ash handling procedures were implemented, zinc concentrations have decreased 10%, arsenic 37%, selenium 20%, cadmium 38% and lead 14%. An analysis of contaminant depth profiles showed that, after implementation of new ash handling procedures in 1995, selenium and cadmium, the main contaminants in Australian black coal had decreased significantly in this estuary. - Highlights: • The main sources of metals to Southern Lake Macquarie are coal-fired power stations. • The metal of highest concern in this estuary is cadmium. • Arsenic was mobile in sediments. • Selenium and cadmium decreased in sediments following new ash handling procedures

  6. CanDan 2, phase 2. Final report. [Fuel cell systems for back-up power and materials handling applications]; CanDan 2, fase 2. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    CanDan 2 Phase 2 is the second phase of a research and demonstration project for fuel cell backup power systems and fuel cell powered material handling equipment. In the Backup Power segment the fuel cell units have been developed, certified and delivered. A total of 32 fuel cell backup power systems have been delivered for EnergiMidt and in operation since early 2011. Following this project EnergiMidt has purchased another 31 systems in order to make a full transition from battery backup to fuel cell backup in their entire broadband network. In the material handling segment a 10 kW fuel cell system has been fully integrated in the fork lift truck, Dantruck 3000 Power Hydrogen. The result was a much more commercially mature product than expected from the beginning of the project. The result is a finished 2,5T fork lift truck which was presented at the CE-mat fair in April 2011. (LN)

  7. Energía mareomotriz: potencial energético y medio ambiente

    Directory of Open Access Journals (Sweden)

    Julián Rodrigo Quintero González

    2015-07-01

    Full Text Available La energía mareomotriz ha tenido un gran desarrollo en relación a su potencial energético y el estudio de sus impactos ambientales. Este trabajo presenta una perspectiva acerca de estos dos aspectos que han sido ampliamente evaluados en diferentes países. Se concluye que el potencial energético de la energía mareomotriz es significativo, en relación con las capacidades instaladas de las plantas de energía actualmente en operación, con el incremento de la producción energética anual y con el número de nuevos proyectos en el marco global. Se indica también que existen impactos ambientales moderados con su implementación.

  8. Energizing Companies through Customer Compliments

    OpenAIRE

    Kipfelsberger, Petra; Bruch, Heike; Herhausen, Dennis

    2015-01-01

    While complaint management has received much attention, customer compliments and their systematic handling have been largely ignored. Based on two empirical studies, this article suggests that customer compliments bear great potential for benefiting firms, and gives recommendations on how managers can enable, stimulate, and amplify positive customer feedback.

  9. Combined optimization model for sustainable energization strategy

    Science.gov (United States)

    Abtew, Mohammed Seid

    Access to energy is a foundation to establish a positive impact on multiple aspects of human development. Both developed and developing countries have a common concern of achieving a sustainable energy supply to fuel economic growth and improve the quality of life with minimal environmental impacts. The Least Developing Countries (LDCs), however, have different economic, social, and energy systems. Prevalence of power outage, lack of access to electricity, structural dissimilarity between rural and urban regions, and traditional fuel dominance for cooking and the resultant health and environmental hazards are some of the distinguishing characteristics of these nations. Most energy planning models have been designed for developed countries' socio-economic demographics and have missed the opportunity to address special features of the poor countries. An improved mixed-integer programming energy-source optimization model is developed to address limitations associated with using current energy optimization models for LDCs, tackle development of the sustainable energization strategies, and ensure diversification and risk management provisions in the selected energy mix. The Model predicted a shift from traditional fuels reliant and weather vulnerable energy source mix to a least cost and reliable modern clean energy sources portfolio, a climb on the energy ladder, and scored multifaceted economic, social, and environmental benefits. At the same time, it represented a transition strategy that evolves to increasingly cleaner energy technologies with growth as opposed to an expensive solution that leapfrogs immediately to the cleanest possible, overreaching technologies.

  10. X-band Robust AlGaN/GaN Receiver MMICs with over 41 dBm Power Handling

    NARCIS (Netherlands)

    Janssen, J.P.B.; Heijningen, M. van; Provenzano, G.; Visser, G.C.; Morvan, E.; Vliet, F.E. van

    2008-01-01

    Gallium-Nitride technology is known for its high power density and power amplifier designs, but is also very well suited to realize robust receiver components. This paper presents the design and measurement of a robust AlGaN/GaN Low Noise Amplifier and Transmit/Receive Switch MMIC. Two versions of

  11. X-Band Robust AlGaN/GaN Receiver MMICs with over 41 dBm Power Handling

    NARCIS (Netherlands)

    Janssen, J.P.B.; van Heijningen, M; Provenzano, G.; van Vliet, Frank Edward

    2008-01-01

    Abstract Gallium-Nitride technology is known for its high power density and power amplifier designs, but is also very well suited to realize robust receiver components. This paper presents the design and measurement of a robust AlGaN/GaN Low Noise Amplifier and Transmit/Receive Switch MMIC. Two

  12. Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables

    OpenAIRE

    LOZANO VALLADOLID, FERNANDO

    2015-01-01

    [ES] Instalación eléctrica con grado de electrificación elevada de una vivienda unifamiliar aislada mediante suministro de energías renovables (solar, eólica, geotérmicas). Lozano Valladolid, F. (2015). Instalación eléctrica de una vivienda unifamiliar aislada mediante suministro de energías renovables. http://hdl.handle.net/10251/58751. TFGM

  13. Energized Oxygen : Speiser Current Sheet Bifurcation

    Science.gov (United States)

    George, D. E.; Jahn, J. M.

    2017-12-01

    A single population of energized Oxygen (O+) is shown to produce a cross-tail bifurcated current sheet in 2.5D PIC simulations of the magnetotail without the influence of magnetic reconnection. Treatment of oxygen in simulations of space plasmas, specifically a magnetotail current sheet, has been limited to thermal energies despite observations of and mechanisms which explain energized ions. We performed simulations of a homogeneous oxygen background, that has been energized in a physically appropriate manner, to study the behavior of current sheets and magnetic reconnection, specifically their bifurcation. This work uses a 2.5D explicit Particle-In-a-Cell (PIC) code to investigate the dynamics of energized heavy ions as they stream Dawn-to-Dusk in the magnetotail current sheet. We present a simulation study dealing with the response of a current sheet system to energized oxygen ions. We establish a, well known and studied, 2-species GEM Challenge Harris current sheet as a starting point. This system is known to eventually evolve and produce magnetic reconnection upon thinning of the current sheet. We added a uniform distribution of thermal O+ to the background. This 3-species system is also known to eventually evolve and produce magnetic reconnection. We add one additional variable to the system by providing an initial duskward velocity to energize the O+. We also traced individual particle motion within the PIC simulation. Three main results are shown. First, energized dawn- dusk streaming ions are clearly seen to exhibit sustained Speiser motion. Second, a single population of heavy ions clearly produces a stable bifurcated current sheet. Third, magnetic reconnection is not required to produce the bifurcated current sheet. Finally a bifurcated current sheet is compatible with the Harris current sheet model. This work is the first step in a series of investigations aimed at studying the effects of energized heavy ions on magnetic reconnection. This work differs

  14. Remote handling machines

    International Nuclear Information System (INIS)

    Sato, Shinri

    1985-01-01

    In nuclear power facilities, the management of radioactive wastes is made with its technology plus the automatic techniques. Under the radiation field, the maintenance or aid of such systems is important. To cope with this situation, MF-2 system, MF-3 system and a manipulator system as remote handling machines are described. MF-2 system consists of an MF-2 carrier truck, a control unit and a command trailer. It is capable of handling heavy-weight objects. The system is not by hydraulic but by electrical means. MF-3 system consists of a four-crawler truck and a manipulator. The truck is versatile in its posture by means of the four independent crawlers. The manipulator system is bilateral in operation, so that the delicate handling is made possible. (Mori, K.)

  15. Group method of data handling and neral networks applied in monitoring and fault detection in sensors in nuclear power plants

    International Nuclear Information System (INIS)

    Bueno, Elaine Inacio

    2011-01-01

    The increasing demand in the complexity, efficiency and reliability in modern industrial systems stimulated studies on control theory applied to the development of Monitoring and Fault Detection system. In this work a new Monitoring and Fault Detection methodology was developed using GMDH (Group Method of Data Handling) algorithm and Artificial Neural Networks (ANNs) which was applied to the IEA-R1 research reactor at IPEN. The Monitoring and Fault Detection system was developed in two parts: the first was dedicated to preprocess information, using GMDH algorithm; and the second part to the process information using ANNs. The GMDH algorithm was used in two different ways: firstly, the GMDH algorithm was used to generate a better database estimated, called matrix z , which was used to train the ANNs. After that, the GMDH was used to study the best set of variables to be used to train the ANNs, resulting in a best monitoring variable estimative. The methodology was developed and tested using five different models: one Theoretical Model and four Models using different sets of reactor variables. After an exhausting study dedicated to the sensors Monitoring, the Fault Detection in sensors was developed by simulating faults in the sensors database using values of 5%, 10%, 15% and 20% in these sensors database. The results obtained using GMDH algorithm in the choice of the best input variables to the ANNs were better than that using only ANNs, thus making possible the use of these methods in the implementation of a new Monitoring and Fault Detection methodology applied in sensors. (author)

  16. Cosecha de energía

    OpenAIRE

    García Ojero, Jesús

    2016-01-01

    En este trabajo se analizarán los distintos métodos conocidos de extraer energía de fuentes tanto naturales como las producidas por el ser humano, entre las que se pueden distinguir las vibraciones mecánicas, gradientes de temperatura o las ondas electromagnéticas emitidas por aparatos electrónicos. Primero realizaremos una revisión bibliográfica de distintos métodos de obtención de energía a partir de vibraciones mecánicas, utilizando materiales piezoeléctricos y actuadores electromagnéticos...

  17. Role conflict: cause of burnout or energizer?

    Science.gov (United States)

    Jones, M L

    1993-03-01

    A year-long study of public child welfare administrators examined the effects of role conflict on their attitudes and performance. Popular belief and some of the literature have suggested that burnout is inevitable for those confronted with role conflict. Other literature has proposed that it may instead be energizing to individuals and lead to greater personal and organizational effectiveness. This qualitative study found that individuals in the study had developed specific, effective skills for responding to role conflict. Although there was a public presentation of self that indicated they were under stress and in "impossible" situations, there was in fact an energizing effect resulting from the ongoing challenge of dealing with conflict.

  18. Final Technical Report, reEnergize Program

    Energy Technology Data Exchange (ETDEWEB)

    Wamstad-Evans, Kristi [City of Omaha; Williams, Eric [City of Omaha; Kubicek, Jason [City of Omaha

    2013-12-27

    The reEnergize Program helped to build a market for residential and commercial energy evaluations and upgrades. The program provided incentives to encourage participants to save energy, save money, and make their homes and businesses more safe, healthy, and comfortable. As part of the Better Buildings Neighborhood Program (BBNP), the successful investment of this $10 million grant toward market development was the first grant funding collaboration between the cities of Omaha and Lincoln. Through more than three years of work, thousands of participants, contractors, and community members worked together to make the reEnergize Program a demonstration of how to “Build Energy Smart Communities.”

  19. A bulk tungsten tile for JET: Heat flux tests in the MARION facility on the power-handling performance and validation of the thermal model

    International Nuclear Information System (INIS)

    Mertens, Ph.; Altmann, H.; Chaumet, P.; Joffrin, E.; Knaup, M.; Matthews, G.F.; Neubauer, O.; Nicolai, D.; Riccardo, V.; Tanchuk, V.; Thompson, V.; Uhlemann, R.; Samm, U.

    2011-01-01

    In the frame of the ITER-like Wall (ILW) for the JET tokamak, a divertor row made of bulk tungsten material has been developed for the position where the outer strike point is located in most of the foreseen plasma configurations. In the absence of active cooling, this represents a formidable challenge when one considers the temperature reached by tungsten (T W,surf > 2000 deg. C) and the vertical gradient ∂T/∂z = 5 x 10 4 K/m. As the development is drawing to an end and most components are in production, actual 1:1 prototypes are exposed to an ion beam with a power density around 7 MW/m 2 on the plasma-facing surface. Advantage is taken of the flexibility of the MARION facility to bombard the tungsten stack under shallow angles of incidence (∼6 o ) with a powerful beam of ions and neutrals (>70 MW/m 2 on axis). The shallow angles are important, with respect to the toroidal wetted surface, for properly simulating the expected performance under actual tokamak conditions. The MARION tests have been used to validate for a few typical cases the thermal calculations that were steadily developed along with the tungsten tile and, at the same time, to gather information on the actual temperatures of individual components. The latter is an important factor to a finer estimation of the power handling capabilities.

  20. How should we handle Fukushima Daiichi Nuclear Power Station accident with engineer ethics? What is seen by encountering resilience engineering

    International Nuclear Information System (INIS)

    Oba, Kyoko

    2017-01-01

    Many of lectures on 'engineer ethics' being held at universities, etc. positively incorporate case study. This paper introduced the Fukushima Daiichi Nuclear Power Station accident (1F accident) not as a mere failure case, but with broader view and broader manner based on practice. Resilience engineering cites anticipating, monitoring, responding, and learning as four core capabilities required to realize safety that people and organizations should aim at. The authors tried to analyze 1F accident using these four core capabilities and the elements required to demonstrating these core capabilities. In the responding of TEPCO to earthquake and tsunami cases before the accident, tsunami countermeasure responding required to prevent 1F accident was not demonstrated as a result. Good examples seen in other responding are the construction of the seismic isolation important building and the deployment of fire engines to the whole nuclear power plant. Accident reports so far took viewpoints of why the accident occurred, and why it led to hydrogen explosion. However, from resilience engineering, why catastrophic conditions could be avoided and how water injection in nuclear facilities could be assured become viewpoints. (A.O.)

  1. Sistema híbrido eólico-diesel para el abastecimiento de energía eléctrica de 20 cabañas turísticas en Cayo Caguamas. // Eolic-Diesel hybrid system for electric power supply of 20 tourist cabins in Caguamas Key.

    Directory of Open Access Journals (Sweden)

    R. Alarcón Fernández

    2001-10-01

    Full Text Available Se presentan los aspectos técnicos y económicos de la planificación de un sistema híbrido eólico-diesel para elabastecimiento de energía eléctrica de 20 cabañas turísticas en Cayo Caguamas. Se determina la demanda de energía y lacurva de carga de la instalación turística. Se dimensiona un sistema híbrido eólico-diesel formado por 6 aerogeneradores de10 kW y dos generadores Diesel de 75 kW cada uno. Finalmente se determina la influencia de la variación de algunosparámetros importantes sobre la rentabilidad del proyectoPalabras claves: Sistema eólico-diesel, generación eléctrica, aerogeneradores, planificación económica._____________________________________________________________________AbstractThe technical and economic aspects of the planning of an Eolic-Diesel hybrid system for the supply of electric power of 20tourist cabins in Caguamas Key are presented. The energy demand and the load curve of the tourist installation isdetermined. An Eolic-Diesel hybrid system formed by six 10 kW windmills and two Diesel generators of 75 kW each oneare dimensioned. Finally the influence of variation of some important parameters about the profitability of the project arestated.Key words:.Eolic-Diesel system, electic power generation, windmillgenerator, economic planning.

  2. Wireless energizing system for an automated implantable sensor

    Energy Technology Data Exchange (ETDEWEB)

    Swain, Biswaranjan; Nayak, Praveen P.; Kar, Durga P.; Bhuyan, Satyanarayan; Mishra, Laxmi P. [Department of Electronics and Instrumentation Engineering, Siksha ‘O’ Anusandhan University, Bhubaneswar 751030 (India)

    2016-07-15

    The wireless drive of an automated implantable electronic sensor has been explored for health monitoring applications. The proposed system comprises of an automated biomedical sensing system which is energized through resonant inductive coupling. The implantable sensor unit is able to monitor the body temperature parameter and sends back the corresponding telemetry data wirelessly to the data recoding unit. It has been observed that the wireless power delivery system is capable of energizing the automated biomedical implantable electronic sensor placed over a distance of 3 cm from the power transmitter with an energy transfer efficiency of 26% at the operating resonant frequency of 562 kHz. This proposed method ensures real-time monitoring of different human body temperatures around the clock. The monitored temperature data have been compared with a calibrated temperature measurement system to ascertain the accuracy of the proposed system. The investigated technique can also be useful for monitoring other body parameters such as blood pressure, bladder pressure, and physiological signals of the patient in vivo using various implantable sensors.

  3. Wireless energizing system for an automated implantable sensor

    International Nuclear Information System (INIS)

    Swain, Biswaranjan; Nayak, Praveen P.; Kar, Durga P.; Bhuyan, Satyanarayan; Mishra, Laxmi P.

    2016-01-01

    The wireless drive of an automated implantable electronic sensor has been explored for health monitoring applications. The proposed system comprises of an automated biomedical sensing system which is energized through resonant inductive coupling. The implantable sensor unit is able to monitor the body temperature parameter and sends back the corresponding telemetry data wirelessly to the data recoding unit. It has been observed that the wireless power delivery system is capable of energizing the automated biomedical implantable electronic sensor placed over a distance of 3 cm from the power transmitter with an energy transfer efficiency of 26% at the operating resonant frequency of 562 kHz. This proposed method ensures real-time monitoring of different human body temperatures around the clock. The monitored temperature data have been compared with a calibrated temperature measurement system to ascertain the accuracy of the proposed system. The investigated technique can also be useful for monitoring other body parameters such as blood pressure, bladder pressure, and physiological signals of the patient in vivo using various implantable sensors.

  4. Wireless energizing system for an automated implantable sensor.

    Science.gov (United States)

    Swain, Biswaranjan; Nayak, Praveen P; Kar, Durga P; Bhuyan, Satyanarayan; Mishra, Laxmi P

    2016-07-01

    The wireless drive of an automated implantable electronic sensor has been explored for health monitoring applications. The proposed system comprises of an automated biomedical sensing system which is energized through resonant inductive coupling. The implantable sensor unit is able to monitor the body temperature parameter and sends back the corresponding telemetry data wirelessly to the data recoding unit. It has been observed that the wireless power delivery system is capable of energizing the automated biomedical implantable electronic sensor placed over a distance of 3 cm from the power transmitter with an energy transfer efficiency of 26% at the operating resonant frequency of 562 kHz. This proposed method ensures real-time monitoring of different human body temperatures around the clock. The monitored temperature data have been compared with a calibrated temperature measurement system to ascertain the accuracy of the proposed system. The investigated technique can also be useful for monitoring other body parameters such as blood pressure, bladder pressure, and physiological signals of the patient in vivo using various implantable sensors.

  5. Herbal Energizers: Speed By Any Other Name.

    Science.gov (United States)

    Jenkins, Andrew P.

    This guide focuses on over-the-counter (OTC) stimulants sold to high school aged athletes and dieters as "herbal energizers," food supplements, and fatigue reducers. While advertising often makes them appear healthful and harmless, all of these stimulants belong in the class "sympathomimetic amines," so called because they…

  6. Temas de Física para Ingeniería: Trabajo y energía

    OpenAIRE

    Beléndez, Augusto; Pastor Antón, Carlos; Bernabeu, Guillermo

    1988-01-01

    Apuntes de Mecánica: "Trabajo y energía". Trabajo y potencia. Energía cinética, teorema de la energía cinética. Fuerzas conservativas, energía potencial. Energía potencial gravitatoria. Principio de conservación de la energía mecánica. Choques.

  7. Application of paste technology to mitigate the dust emissions from handling of fly and bottom ash at coal fired power plant : CGTEE in Candiota, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Silva Marques, M.E. [Golder Associates Peru, Lima (Peru); Lima, H. [Golder Associates Brazil, Sao Paulo (Brazil); Mandl, B.; Francoeur, R.; Palkovits, F. [Golder Paste Technology Ltd., Mississauga, ON (Canada); Blois, R. [Companhia de Geracao Termica de Energia Electrica, Porto Alegre (Brazil)

    2010-07-01

    This paper discussed a method developed to reduce dust emissions generated in a fly ash handling procedure used at a thermal power plant located in the south of Brazil. The fly ash is collected in dry form at several locations in the plant and pneumatically conveyed to storage silos, where it is moistened with water in a mixer, loaded into dump trucks and deposited in a disposal area near a surface coal mine. The new solution created low density fly ash slurry in localized mixing tanks within the power plant. The low density slurry is pumped to an ash conditioning plant where the slurry is then mixed with the bottom ash, dewatered, and densified. The densified slurry is then pumped to an adjacent coal mine disposal site in order to be used as backfill in mined areas. The proposed method will significantly reduce dust emissions both inside and outside the plant, and will substantially reduce truck traffic at the mine. The method will reduce the environmental impacts associated with fly ash dust emissions in the region. 8 figs.

  8. Energizing architecture. Design and photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Lueling, Claudia (ed.)

    2009-07-01

    Power generation by photovoltaic systems and buildings is much more than just an alternative to traditional electric power generation. As the planning and design of photovoltaics is increasingly shifting to the forefront, it is rapidly becoming a new challenge for architecture. This book describes the whole spectrum of possible applications - from inspiration to detail - of photovoltaics as an integral part of building envelopes and introduces groundbreaking examples and visions for the future, in which photovoltaic elements work as a successful part of exterior facades - combined with highly luminous and economical illuminated wallpaper and curtains inside buildings. Its range extends from early designs by artists such as Daniel Hausig to aspects of material selection to detail drawings of implemented solutions. The enormous variety of possible applications of this new (building) material demonstrates the huge potential it possesses. (orig.)

  9. Rural electrification or village energization

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D V

    1980-03-01

    Decentralized power generation using renewable energy resources is more appropriate to the energy needs of the rural Third World. These countries often look to the rural electrification programs of the US and Soviet Union as the answer to their problem even though studies consistently show this to be inefficient and frequently ineffective, often reinforcing existing social and economic inequities. When the uses of energy in rural villages are examined in detail, the only approach which will supply energy to the rural poor must be based on a local and regional match of need to indigenous energy sources and to the development of local talent and enthusiasm. 29 references. (DCK)

  10. Handling of views and opinions by staters and others in a public hearing on alteration in reactor installation (addition of Unit 2) in the Sendai Nuclear Power Station of Kyushu Electric Power Co., Inc

    International Nuclear Information System (INIS)

    1981-01-01

    A public hearing on the addition of Unit 2 in the Sendai Nuclear Power Station, Kyushu Electric Power Co., Inc., was held on July 17, 1980, in Sendai City, Kagoshima Prefecture. The views and opinions by the local staters and those by the notification of statement were expressed concerning its nuclear safety. The handling of these views and opinions by the Nuclear Safety Commission is explained. The most important in this action is the instruction by the NSC to the Committee on Examination of Reactor Safety to reflect the results of the public hearing to the reactor safety examination of the Unit 2 installation by the CERS. The views and opinions expressed in this connection are summarized as follows: the sitting conditions, the safety design of the reactor plant, and the release of radioactive materials, involving such aspects as earthquakes, accidents and radioactive waste management. (J.P.N.)

  11. 2010 Manufacturing Readiness Assessment Update to the 2008 Report for Fuel Cell Stacks and Systems for the Backup Power and Materials Handling Equipment Markets

    Energy Technology Data Exchange (ETDEWEB)

    Wheeler, D.; Ulsh, M.

    2012-08-01

    In 2008, the National Renewable Energy Laboratory (NREL), under contract to the US Department of Energy (DOE), conducted a manufacturing readiness assessment (MRA) of fuel cell systems and fuel cell stacks for back-up power and material handling applications (MHE). To facilitate the MRA, manufacturing readiness levels (MRL) were defined that were based on the Technology Readiness Levels previously established by the US Department of Energy (DOE). NREL assessed the extensive existing hierarchy of MRLs developed by Department of Defense (DoD) and other Federal entities, and developed a MRL scale adapted to the needs of the Fuel Cell Technologies Program (FCTP) and to the status of the fuel cell industry. The MRL ranking of a fuel cell manufacturing facility increases as the manufacturing capability transitions from laboratory prototype development through Low Rate Initial Production to Full Rate Production. DOE can use MRLs to address the economic and institutional risks associated with a ramp-up in polymer electrolyte membrane (PEM) fuel cell production. In 2010, NREL updated this assessment, including additional manufacturers, an assessment of market developments since the original report, and a comparison of MRLs between 2008 and 2010.

  12. Development and energization of IOT based RF amplifier

    International Nuclear Information System (INIS)

    Mandal, A.; Som, S.; Raj, P.R.; Manna, S.K.; Ghosh, S.; Seth, S.; Thakurta, S.; Thakur, S.K.; Saha, S.; Panda, U.S.

    2013-01-01

    A 704 MHz IOT based CW RF amplifier has been developed in VECC. It can also be used with proper tuning to power cavity modules operating at 650 MHz in high energy high intensity proton linear accelerator proposed to be built for ADSS/SNS programme in India and Project-X at Fermilab, USA. This IOT based amplifier provides up to 60 kW continuous wave RF power at 700 MHz. It required various power supplies, LCW cooling and forced air cooling for its operation. The auxiliary power supplies like Grid, Filament and Ion-pump, are floated and mounted on an isolated frame, i.e., HV deck. The mains inputs are electrically isolated by means of isolation transformer. Also, a Programmable Logic Controller (PLC) based interlocks along with high voltage collector power supply has been designed and developed for the safe operation of the RF amplifier. This paper discusses about various developments and energization of the IOT based RF amplifier with high power dummy load. (author)

  13. Extreme coal handling

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, S; Homleid, D. [Air Control Science Inc. (United States)

    2004-04-01

    Within the journals 'Focus on O & M' is a short article describing modifications to coal handling systems at Eielson Air Force Base near Fairbanks, Alaska, which is supplied with power and heat from a subbituminous coal-fired central plant. Measures to reduce dust include addition of an enclosed recirculation chamber at each transfer point and new chute designs to reduce coal velocity, turbulence, and induced air. The modifications were developed by Air Control Science (ACS). 7 figs., 1 tab.

  14. Evaluación energética de un sistema de generación de 400 kWe en modo diesel‐gas licuado de petróleo//Energy analysis of a 400 kWe power system operated on dual fuel mode with diesel‐liquefied petroleum gas

    OpenAIRE

    Carlos‐A. Forero-Núñez; Jorge Eduardo‐Arango; Fabio Emiro Sierra‐Vargas

    2014-01-01

    El constante aumento en los precios de los combustibles impulsó el desarrollo de sistemas energéticos cada vez más eficientes y flexibles, los cuales permitan el uso de distintos tipos de combustibles, tales como el gas licuado de petróleo (GLP). El presente trabajo buscó analizar el comportamiento energético y ambiental que tiene una planta de generación de 400 kWe operada en modo diesel y dual diesel-GLP de pozo. La eficiencia energética total del sistema en el punto de máxima carga fue igu...

  15. HyLIFT-FLEX. ''Development and demonstration of flexible and scalable fuel cell power system for various material handling vehicles''. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-10-15

    The project has successfully developed and tested a new fuel cell system from H2 Logic in a tow tractor from MULAG. Based on the project results a positive decision has been taken on continuing commercialisation efforts. Next step will be a large scale demonstration of up to 100 units in a new project named HyLIFT-Europe that is expected to commence in early 2013, with support from the FCH-JU programme. Main efforts in the project have been the development of a new fuel cell system, named H2Drive from H2 Logic, and the integration and test in a standard battery powered COMET 3 towing tractor from MULAG. The system size is exactly the same as a standard battery box (DIN measures) and can be easily integrated into e.g. the MULAG vehicle or other electric powered material handling vehicles using the same battery size. Several R and D efforts on the fuel cell system have been conducted with the aim to reduce cost and improve efficiency, among others the following: 1) New air compressor sub-system and control - improving overall system efficiency with {approx}2,5%. 2) New simplified air-based compressor cooling sub-system. 3) New hydrogen compressor sub-system with improved efficiency and reduced cost. 4) New hydrogen inlet and outlet manifold sub-system - resulting in reduction of more than 50% of all sensor components in the fuel cell system. 5) New DC/DC converter with an average efficiency of 97% - a 3% improvement. 6) A new optimized hybrid system that meets the vehicle cycle requirements. In total the R and D efforts have improved the overall fuel cell system efficiency with 10% and helped to reduce costs with 33% compared to the previous generation. A first prototype of the developed H2Drive system has been constructed and integrated into the MULAG Towing Tractor. Only few modifications were made on the base vehicle, among others integration of cabin-heating, displays and motor control. Several internal tests were conducted at H2 Logic and MULAG before making a

  16. Voltage dip caused by the sequential energization of wind turbine transformers

    DEFF Research Database (Denmark)

    Arana Aristi, Iván; Holbøll, Joachim; Sørensen, T.

    2009-01-01

    motors, this recommendation automatically applies to the wind turbine transformers in a wind farm, regardless of the fact that wind turbine transformers are rarely energized and the investment of timed relays might be significant. At the design stage of the collection grid of large offshore wind farms...... farms in Denmark and the UK. However, there is still work to be done to optimize the investment and protection system of the internal grid of the wind power plants....

  17. La energía nuclear y la industria en Francia

    Directory of Open Access Journals (Sweden)

    Roux, A.

    1980-09-01

    Full Text Available In this article an analysis is made of the favorable effects for industry involved in the development of nuclear energy and the interaction between them. Reference is made to the problem of energy supply in France and the need for an effort in energy savings, to the development of new sources and priority in the establishment of an important program of nuclear power plants. Also, an analysis is made of the role of Industry, the Atomic Energy and Electricity Commission of France in the supply and processing of the nuclear materials. Finally, a general review of the manpower and technical means presently available is made, as well as an examination of the investments foreseen for local development of this energy.

    En este artículo se analizan los efectos favorables que para la Industria tiene el desarrollo de la energía nuclear y las interacciones entre ambas. Se hace referencia al problema del aprovisionamiento energético en Francia y a la necesidad de un esfuerzo en materia de ahorro de energía, al desarrollo de nuevas fuentes y a la prioridad en el establecimiento de un importante programa de centrales nucleares. También es analizado el papel de la Industria, la Comisaría de Energía Atómica y Electricidad de Francia en el abastecimiento y en la transformación de los materiales nucleares. Por último, se hace un repaso general de los medios humanos y técnicos con que se cuenta en la actualidad, así como de las inversiones previstas para un desarrollo nacional de esta energía.

  18. Calidad de la energía en redes eléctricas con penetración eólica. Caso: Parque Eólico de Turiguanó: Power quality in electrical networks with aeolian penetration. Case: The Turiguanó wind farm

    Directory of Open Access Journals (Sweden)

    Daisnel Coello Igarza

    2013-06-01

    Full Text Available En este trabajo se describe la problemática de la generación eólica con respecto a la calidad de la energía producida, ya que incorpora inversores que distorsionan la onda fundamental de tensión y corriente, como una de las características de la generación eólica que emplea turbinas de velocidad variable, junto con las exportaciones e importaciones de potencia reactiva y la consecuente disminución del factor de potencia; para este propósito se analiza un caso práctico, a partir de mediciones reales de potencias reactivas, factor de potencia y armónicos, realizadas en el Parque Eólico Demostrativo de Turiguanó, además de otras mediciones acumuladas en los registros de la “Documentación de explotación del parque”, exponiendo una metodología para determinar, con las mediciones realizadas, los valores de potencias reactivas, factores de potencia y armónicos para cada valor de grado de carga del parque eólico y operación de las turbinas.In this work the problem of the aeolian generation is described regarding to the quality of the produced energy because the inverters, that distort the fundamental wave of tension and current, has been incorporate like one of the characteristics of the aeolian generation that use turbines of variable speed, together with the exports and imports of reactive power and the consequent decrease of the power factor; for this purpose takes a practical example, with real measures of reactive powers, power factor and harmonics, carried out in the Demonstrative Wind Farm of Turiguanó and others accumulated measures from the records of the technical documentation of the wind farm, exposing a methodology to determine, with the realized measures, the values of reactive powers, power factor and harmonics for each value of load degree of the wind farm and operation of the turbines.

  19. Calidad de la energía en redes eléctricas con penetración eólica. Caso: Parque Eólico de Turiguanó; Power quality in electrical networks with aeolian penetration. Case: The Turiguanó wind farm

    Directory of Open Access Journals (Sweden)

    Eduardo Sierra Gil

    2013-06-01

    Full Text Available En este trabajo se describe la problemática de la generación eólica con respecto a la calidad de la energía producida, ya que incorpora inversores que distorsionan la onda fundamental de tensión y corriente, como una de las características de la generación eólica que emplea turbinas de velocidad variable, junto con las exportaciones e importaciones de potencia reactiva y la consecuente disminución del factor de potencia; para este propósito se analiza un caso práctico, a partir de mediciones reales de potencias reactivas, factor de potencia y armónicos, realizadas en el Parque Eólico Demostrativo de Turiguanó, además de otras mediciones acumuladas en los registros de la “Documentación de explotación del parque”, exponiendo una metodología para determinar, con las mediciones realizadas, los valores de potencias reactivas, factores de potencia y armónicos para cada valor de grado de carga del parque eólico y operación de las turbinas.  In this work the problem of the aeolian generation is described regarding to the quality of the produced energy because the inverters, that distort the fundamental wave of tension and current, has been incorporate like one of the characteristics of the aeolian generation that use turbines of variable speed, together with the exports and imports of reactive power and the consequent decrease of the power factor; for this purpose takes a practical example, with real measures of reactive powers, power factor and harmonics, carried out in the Demonstrative Wind Farm of Turiguanó and others accumulated measures from the records of the technical documentation of the wind farm, exposing a methodology to determine, with the realized measures, the values of reactive powers, power factor and harmonics for each value of load degree of the wind farm and operation of the turbines.

  20. 29 CFR 1926.957 - Construction in energized substations.

    Science.gov (United States)

    2010-07-01

    ... Distribution § 1926.957 Construction in energized substations. (a) Work near energized equipment facilities. (1... lines. When it is necessary to deenergize equipment or lines for protection of employees, the... large electrical equipment, transformers, or breakers. (f) Storage. The storage requirements of § 1926...

  1. Group method of data handling and neral networks applied in monitoring and fault detection in sensors in nuclear power plants; Group Method of Data Handling (GMDH) e Redes Neurais na Monitoracao e Deteccao de Falhas em sensores de centrais nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Elaine Inacio

    2011-07-01

    The increasing demand in the complexity, efficiency and reliability in modern industrial systems stimulated studies on control theory applied to the development of Monitoring and Fault Detection system. In this work a new Monitoring and Fault Detection methodology was developed using GMDH (Group Method of Data Handling) algorithm and Artificial Neural Networks (ANNs) which was applied to the IEA-R1 research reactor at IPEN. The Monitoring and Fault Detection system was developed in two parts: the first was dedicated to preprocess information, using GMDH algorithm; and the second part to the process information using ANNs. The GMDH algorithm was used in two different ways: firstly, the GMDH algorithm was used to generate a better database estimated, called matrix{sub z}, which was used to train the ANNs. After that, the GMDH was used to study the best set of variables to be used to train the ANNs, resulting in a best monitoring variable estimative. The methodology was developed and tested using five different models: one Theoretical Model and four Models using different sets of reactor variables. After an exhausting study dedicated to the sensors Monitoring, the Fault Detection in sensors was developed by simulating faults in the sensors database using values of 5%, 10%, 15% and 20% in these sensors database. The results obtained using GMDH algorithm in the choice of the best input variables to the ANNs were better than that using only ANNs, thus making possible the use of these methods in the implementation of a new Monitoring and Fault Detection methodology applied in sensors. (author)

  2. Os postulados de Nightingale e Semmelweis: poder/vital e prevenção/contágio como estratégias para a evitabilidade das infecções Los postulados de Nightingale y Semmelweis: energía vital/vida y prevención/contágio como estrategias para evitar las infecciones Nightingale's and Semmelweis' postulates: vital power and contagion prevention as strategies to avoid infections

    Directory of Open Access Journals (Sweden)

    Telma Elisa Carraro

    2004-08-01

    Full Text Available Trata-se de pesquisa qualitativa, que utilizou a observação como técnica para coleta de dados, tendo como guia um instrumento elaborado a partir de postulados de Florence Nightingale e Ignaz Phillip Semmelweis: poder vital/vida e prevenção/contágio. Registra breve histórico sobre o controle de infecções, destacando o enfoque prevenção/contágio. Discorre sobre o postulado poder vital/vida, apresentando e discutindo os componentes da assistência de Enfermagem dele decorrentes para o desenvolvimento da assistência. Recomenda que se considere articuladamente as vertentes - Poder Vital/Vida e Prevenção/Contágio - como estratégias para a evitabilidade das infecções.Esta investigación cualitativa utilizó la observación como técnica de recolección de datos, guiándose por un instrumento basado en los postulados de Florence Nightingale e Ignaz Phillip Semmelweis: energía vital/vida y prevención/contagio. Presenta un breve histórico acerca del control de infección, destacando el enfoque prevención/contagio. Habla sobre el postulado energía vital/vida, presentando y discutiendo los componentes de la asistencia de enfermería que se desprenden de él para el desarrollo de la asistencia. Concluye recomendando que se considere articuladamente las vertientes energía vital/vida y prevención/contagio como estrategia para evitar las infecciones.This qualitative research used observation as a data collection technique, guided by an instrument elaborated on the basis of Nightingale and Semmelweis' postulates: vital power/life and prevention/contagion. A brief history of infection control is offered from the focus of prevention/contagion. The postulate vital power/life is discussed, presenting the nursing care components deriving from it with a view to care development. This study recommends that both postulates - vital power/life and prevention/contagion - be considered in an articulated way as strategies to avoid infections.

  3. Identificación de síntomas espectrales asociados a problemas en grupos electro energéticos. // Spectral Symptom Identification Associated to Problems in Power Plant Machines.

    Directory of Open Access Journals (Sweden)

    J. Cabrera Gómez

    2005-01-01

    Full Text Available La aplicación de estrategias de mantenimiento predictivo es una de las tendencias actuales en las centrales generadoras deenergía eléctrica. Las acciones predictivas se fundamentan en el monitorado y control del estado de las máquinas, jugandoen este sentido la medición y análisis de las vibraciones un rol preponderante. El trabajo muestra, tomando como base ungran número de mediciones de campo realizadas, la forma en que se reflejan en los espectros de las vibraciones registradasvarios de los principales problemas que pueden presentar estas máquinas durante su funcionamiento.Palabras claves: Vibraciones mecánicas, fuerzas excitadoras, resonancias, comportamiento dinámico,espectro de vibraciones, mantenimiento predictivo._________________________________________________________________________________Abstract.The application of predictive maintenance strategies is an actual trend in power plants. Predictive actions are based onmachine condition monitoring, and vibration measurements and analysis play a prevailing role in order to control themachine condition. Based on a large number of vibration measurements made on real machines, this paper shows howdifferent problems in these machines during operation are identified in vibration spectra.Key words: Mechanical vibrations, exciting forces, resonances, dynamic behaviour, vibration spectrum,predictive maintenance.

  4. Transformer inrush current reduction through sequential energization for wind farm applications

    Energy Technology Data Exchange (ETDEWEB)

    Abdulsalam, S.; Xu, W. [Alberta Univ., Edmonton, AB (Canada)

    2008-07-01

    Wind power is considered as one of the fastest growing technologies in the power industry. The electrical configuration of a wind farm consists of long spans of medium voltage collector feeders. Each wind generator is connected to the collector circuit/feeder through either a pad mount oil filled, or a nacelle-mounted dry type transformer. All collector feeders connect to a single collector substation where the connection to the high-voltage transmission is established through a step up transformer. With a large number of wind generators per feeder, large inrush current will flow due to simultaneous transformer energization which can cause high voltage sag at the point of common coupling. Wind farms are generally located in unpopulated remote areas where no access to strong network connection is feasible. It is common to have the PCC on a relatively weak location on the sub-transmission/distribution network. In order to meet interconnection standards requirements, the amount of voltage sag due to the energization of a number of transformers needs to be evaluated. This paper presented an effective solution to the mitigation of inrush currents and associated voltage sag for wind farm applications. The paper presented a diagram of a typical configuration of a wind farm electrical distribution system and also described the analytical methodologies for the evaluation of inrush current level together with simulation results. A simplified analysis and sizing criteria for the associated neutral resistor size was presented. It was concluded that the scheme could significantly reduce inrush current level when a large number of transformers are simultaneously energized. The presented application eliminates the need to sectionalize feeders, thereby simplifying them for the energization process. 6 refs., 5 figs.

  5. La pobreza energética y sus implicaciones

    OpenAIRE

    Mikel González-Eguino

    2014-01-01

    32 p. El sector energético se enfrenta en las próximas décadas a tres grandes transformaciones relacionadas con el cambio climático, la seguridad de suministro y la pobreza energética. Las dos primeras han sido analizadas ampliamente. Sin embargo, la pobreza energética ha pasado más desapercibida a pesar de tener una gran influencia en la vida de millones de personas, especialmente en los países más pobres. Actualmente, 1.300 millones de personas (el 20% de la población mundial) no tienen ...

  6. Involvement of the ORNL Chemical Technology Division in contaminated air and water handling at the Three Mile Island Nuclear Power Station

    International Nuclear Information System (INIS)

    Brooksbank, R.E.; King, L.J.

    1979-08-01

    The President's Commission on the Accident at Three Mile Island requested that Oak Ridge National Laboratory (ORNL) generate documents concerning two areas in which ORNL personnel provided on-site assistance following the accident on March 28, 1979. These are: instrumentation diagnostics, and the treatment of radioactive wastes and liquid effluents stemming from the accident. This report describes the involvement of the ORNL Chemical Technology Division (CTD) in contaminated air and water handling at Three Mile Island

  7. Energía minihidráulica : una alternativa energética para electrificación rural

    OpenAIRE

    Agudelo Flórez, Sergio Cipriano; Chamorro Rendón, Luis Javier

    2002-01-01

    Entre las actividades del Grupo de Energía Alternativa (GEA) de la Facultad de Ingeniería de la Universidad de Antioquia, se pretende el desarrollo de prototipos que aprovechen las fuentes no convencionales para la producción de energía eléctrica y así satisfacer las necesidades insatisfechas de las viviendas rurales aisladas de la red energética nacional. En la región del Oriente antioqueño, se encontró un formidable recurso hidráulico de grandes ríos, quebradas y fuentes de agua cercanas a ...

  8. Development of commercial robots for radwaste handling

    International Nuclear Information System (INIS)

    Colborn, K.A.

    1988-01-01

    The cost and dose burden associated with low level radwaste handling activities is a matter of increasing concern to the commercial nuclear power industry. This concern is evidenced by the fact that many utilities have begun to revaluate waste generation, handling, and disposal activities at their plants in an effort to improve their overall radwaste handling operations. This paper reports on the project Robots for Radwaste Handling, to identify the potential of robots to improve radwaste handling operations. The project has focussed on the potential of remote or automated technology to improve well defined, recognizable radwaste operations. The project focussed on repetitive, low skill level radwaste handling and decontamination tasks which involve significant radiation exposure

  9. Radiation signatures from a locally energized flaring loop

    International Nuclear Information System (INIS)

    Emslie, A.G.; Vlahos, L.; and Institute for Plasma Research, Stanford University)

    1980-01-01

    We calculate the radiation signatures from a locally energized solar flare loop, at a variety of wavelengths. Our calculations depend strongly on the physical properties of the energy release mechanism which we qualitatively discuss

  10. Dissinfection of municipal sludge and wastewater by energized electrons

    International Nuclear Information System (INIS)

    Trump, J.G.; Wright, K.A.; Sinskey, A.J.; Shah, D.N.; Fernald, R.

    1979-01-01

    Laboratory studies at M.I.T. and high flow rate studies at the M.D.C. Deer Island Wastewater Treatment Plant in Boston have shown the practicality and cost effectiveness of disinfecting liquid municipal sludges by injecting energized electrons. A dosage of 400 Kilorads (4 Kilograys) reduces gram-negative bacteria, including coliforms, fecal coliforms, salmonellae and shigellae, in primary raw or anaerobically digested sludges to undetectable levels. Enteric viruses are reduced by one to two orders of magnitude. This treatment also destroys parasite eggs or renders them non-infectious. Model system studies indicate that trace toxic compounds such as PCBs in water are degraded. The estimated cost of sludge disinfection by electron treatment is about $0.80 per liquid tonne for modular systems of 650 liquid tonnes per day capacity. About 6 Kilowatt-hours of input electric power per tonne is required. The temperature rise of the disinfected watery sludge is about 2 0 C. Electron disinfection combined with subsurface soil injection offers an environmentally attractive, energy-efficient, and economic two -step process for land disposal of municipal sludges with water conservation and soil improvement benefits. Combined with widely-distributed ocean feeding, electron disinfection of the municipal sludge of coastal communities offers a safe marine nutrient for increasing fish population in treated ocean areas. The electron disinfection of effluent wastewater, in lieu of chlorination, is a future application which avoids the production of potentially toxic chlorinated hydrocarbons. (Author) [pt

  11. Som Energia: sostenibilitat energètica i cooperativisme

    OpenAIRE

    Duran i Grant, Alexandre; Huijink, Gijsbert; Roselló, Marc

    2013-01-01

    La cooperativa Som Energia és una organització innovadora en el sector energètic a casa nostra. Proposa una forma de fer diferent de la de les empreses tradicionals del sector: ven energia renovable certificada, no té ànim de lucre i busca el bé comú. La proposta treballa per la sostenibilitat energètica.

  12. Energizing Subject Guide Service with Web 2.0

    Directory of Open Access Journals (Sweden)

    Sheau-Hwang Chang

    2014-06-01

    Full Text Available This article will use LibGuides as an example to illustrate how a Web 2.0 platform can energize the subject guide service and give librarians an edge in expanding their roles. Topics to be discussed will include a brief introduction to LibGuides and its capabilities to energize subject guide creation, how it has been used by academic libraries, how it is used in Maxwell Library in expanding librarian's role, and finally its implications on librarianship.

  13. Energizing Local Values For Tourism Services Improvement

    Directory of Open Access Journals (Sweden)

    Budi Purnomo

    2012-06-01

    Full Text Available People in most cultures would probably agree that politeness is needed during their interaction. However there may be differing opinions as to when they should be polite. In tourism industry, tourism service providers’ act as hosts and tourists act as guests. Typically hosts will try to act politely and use appropriate politeness norms when serving guests to ensure their satisfaction. The research findings show that the tourism service providers in Central Java use various unggah-ungguh ‘politeness norms’ when serving English speaking tourists and Indonesian speaking tourists. Besides that, there are some violations made by the tourism service providers in using unggah-ungguh ‘politeness norms’. The research findings also show that there are similar and different perspectives on unggah-ungguh ‘politeness norms’ between English speaking tourists with Western culture backgrounds and Indonesian speaking tourists with Indonesian culture backgrounds towards the politeness norms used by the tourism service providers in Central Java. The findings imply the needs of energizing unggah-ungguh ‘politeness norms’ which is discovered from well known noble Javanese values used by the tourism service providers for tourism service improvement.

  14. Energizing porters by proton-motive force.

    Science.gov (United States)

    Nelson, N

    1994-11-01

    It is generally accepted that the chemistry of water was the most crucial determinant in shaping life on earth. Among the more important chemical features of water is its dissociation into protons and hydroxyl ions. The presence of relatively high proton concentrations in the ambient solution resulted in the evolution of proton pumps during the dawn of life on earth. These proton pumps maintained neutral pH inside the cells and generated electrochemical gradients of protons (proton-motive force) across their membranes. The existence of proton-motive force enabled the evolution of porters driven by it that are most probably among the more primitive porters in the world. The directionality of the substrate transport by the porters could be to both sides of the membranes because they can serve as proton symporters or antiporters. One of the most important subjects of this meeting is the mechanism by which proton-motive and other ion-motive forces drive the transport processes through porters. Is there a common mechanism of action for all proton-driven porters? Is there some common partial reaction by which we can identify the way that porters are energized by proton-motive force? Is there a common coupling between proton movement and uptake or secretion of certain molecules? Even a partial answer to one of these questions would advance our knowledge... or confusion. As my mentor Efraim Racker used to say: 'If you are not totally confused you do not understand the issue'.

  15. Variaciones de voltaje: Mala calidad de la energía

    Directory of Open Access Journals (Sweden)

    Norberto Rodríguez Barallobre

    2011-02-01

    Full Text Available Este es el primero de una serie de artículos encaminados a tratar la creciente problemática de la calidadde la energía en las instalaciones industriales debida al incremento del uso de la electrónica y suscomponentes contaminantes de la energía eléctrica entendida como el producto de la onda de corriente yla de voltaje. Además, se ofrece un procedimiento para estimar el costo de las pérdidas técnicas ytecnológicas por concepto de una mala calidad de la energía así como, algunas recomendaciones paramitigar estas pérdidas millonarias en el sector industrial.  This is a first of a series of papers toward to treat the power quality growing problematical in industrialinstallations networks, due to increasing use of electronic and its polluting components, learned as aproduct of the current and voltage wave, Also is offered a procedure to estimate the technical andtechnological losses cost due to the low quality energy, some recommendations to mitigate this millonairelosses in the industrial sector

  16. International handling of fissionable material

    International Nuclear Information System (INIS)

    1975-01-01

    The opinion of the ministry for foreign affairs on international handling of fissionable materials is given. As an introduction a survey is given of the possibilities to produce nuclear weapons from materials used in or produced by power reactors. Principles for international control of fissionable materials are given. International agreements against proliferation of nuclear weapons are surveyed and methods to improve them are proposed. (K.K.)

  17. Model of taking of decisions for energization of isolated areas not interconnected

    International Nuclear Information System (INIS)

    Smith, Ricardo; Jaramillo, Patricia; Angel, William; Henao, Felipe

    2003-01-01

    In the word, particularly in developing countries, a big part of the population lives in isolated areas, which are, in most of the cases, poor. That is why governments and NGOs, make efforts to formulate policies, plans and programs in order to improve the quality of life and promote the economic development in those regions. However, most of those programs are not successful. One of the main causing factors of this problem is the decision maker's lack of proper methodologies that support them in the decision process. In this context, we propose some methodologies based in a multicriteria decision theory in order to solve two basic related problems: the first one is how to choose the most suitable and satisfactory technology for supply energy to an isolated area; the second one is how to order by priority a set of communities that are consider in a national or regional energization plan. The proposed patterns allow handling with problems where the consideration o many objectives and many decision makers in the process are necessary and with problems where part of the information is unknown or not precisely defined. With these methodologies, the responsible governmental entities in charge of the energization of a country would make less subjective energy plans with better solutions in terms of social, economic, environmental and technologic aspects

  18. Model of taking of decisions for energization of isolated areas not interconnected

    International Nuclear Information System (INIS)

    Smith, Ricardo; Jaramillo, Patricia; Angel William; Henao, Felipe

    2003-01-01

    In the word, particularly in developing countries, a big part of the population lives in isolated areas, which are, in most of the cases, poor. That is why governments and NGO make efforts to formulate policies, plans and programs in order to improve the quality of life and promote the economic development in those regions. However, most of those programs are not successful. One of the main causing factors of this problem is the decision maker's lack of proper methodologies that support them in the decision process. In this context, we propose some methodologies based in a multicriteria decision theory in order to solve two basic related problems: the first one is how to choose the most suitable and satisfactory technology for supply energy to an isolated area; the second one is how to order by priority a set of communities that are consider in a national or regional energization plan. The proposed patterns allow handling with problems where the consideration of many objectives and many decision makers in the process are necessary and with problems where part of the information is unknown or not precisely defined. With these methodologies, the responsible governmental entities - in charge of the energization of a country would make less subjective energy plans with better solutions in terms of social, economic, environmental and technologic aspects

  19. Nuclear fuel handling apparatus

    International Nuclear Information System (INIS)

    Andrea, C.; Dupen, C.F.G.; Noyes, R.C.

    1977-01-01

    A fuel handling machine for a liquid metal cooled nuclear reactor in which a retractable handling tube and gripper are lowered into the reactor to withdraw a spent fuel assembly into the handling tube. The handling tube containing the fuel assembly immersed in liquid sodium is then withdrawn completely from the reactor into the outer barrel of the handling machine. The machine is then used to transport the spent fuel assembly directly to a remotely located decay tank. The fuel handling machine includes a decay heat removal system which continuously removes heat from the interior of the handling tube and which is capable of operating at its full cooling capacity at all times. The handling tube is supported in the machine from an articulated joint which enables it to readily align itself with the correct position in the core. An emergency sodium supply is carried directly by the machine to provide make up in the event of a loss of sodium from the handling tube during transport to the decay tank. 5 claims, 32 drawing figures

  20. City of Phoenix - Energize Phoenix Program

    Energy Technology Data Exchange (ETDEWEB)

    Laloudakis, Dimitrios J.

    2014-09-29

    Energize Phoenix (EPHX) was designed as an ambitious, large-scale, three-year pilot program to provide energy efficiency upgrades in buildings, along Phoenix’s new Light Rail Corridor – part of a federal effort to reduce energy consumption and stimulate job growth, while simultaneously reducing the country’s carbon footprint and promoting a shift towards a green economy. The program was created through a 2010 competitive grant awarded to the City of Phoenix who managed the program in partnership with Arizona State University (ASU), the state’s largest university, and Arizona Public Service (APS), the state’s largest electricity provider. The U.S. Department of Energy (DOE) Better Buildings Neighborhood Program (BBNP) and the American Recovery and Reinvestment Act (ARRA) of 2009 provided $25M in funding for the EPHX program. The Light Rail Corridor runs through the heart of downtown Phoenix, making most high-rise and smaller commercial buildings eligible to participate in the EPHX program, along with a diverse mix of single and multi-family residential buildings. To ensure maximum impact and deeper market penetration, Energize Phoenix was subdivided into three unique parts: i. commercial rebate program, ii. commercial financing program, and iii. residential program Each component was managed by the City of Phoenix in partnership with APS. Phoenix was fortunate to partner with APS, which already operated robust commercial and residential rebate programs within its service territory. Phoenix tapped into the existing utility contractor network, provided specific training to over 100 contracting firms, and leveraged the APS rebate program structure (energy efficiency funding) to launch the EPHX commercial and residential rebate programs. The commercial finance program was coordinated and managed through a contract with National Bank of Arizona, NBAZ, which also provided project capital leveraging EPHX finance funds. Working in unison, approved contractors

  1. Surface-near geothermal power. Handling of hydro-economic requirements in the practice; Oberflaechennahe Geothermie. Umgang mit den wasserwirtschaftlichen Anforderungen in der Praxis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-12-15

    Within the meeting of the Bavarian Environment Agency (Augsburg, Federal Republic of Germany) at 1st December, 2009, the following lectures were held: (1) Hydro-economical requirements and working assistance of the Bavarian Environment Agency (Hannes Berger); (2) Technology, dimensioning and safety devices for heat pumps and heat source plants soil - groundwater (Erich Ramming); (3) Well devices for the thermal utilization of the groundwater - planning, production and quality assurance (Michael Thoren); (4) Geothermal probes: Handling of raw materials and welding at the building site (Hubert Graf); (5) Geothermal probes - planning and calculation (Burkhard Sanner); (6) Geothermal probes - drilling operations (Sven Tewes); (7) Certification of drilling companies according to W 120 (Udo Peth); (8) Operation of geothermal plants - Examples from one-family house to football stadium (Arno Poehlmann).

  2. Fundamental processes in the expansion, energization, and coupling of single- and multi-Ion plasmas in space: Laboratory simulation experiments

    Science.gov (United States)

    Szuszczewicz, E. P.; Bateman, T. T.

    1996-01-01

    We have conducted a laboratory investigation into the physics of plasma expansions and their associated energization processes. We studied single- and multi-ion plasma processes in self-expansions, and included light and heavy ions and heavy/light mixtures to encompass the phenomenological regimes of the solar and polar winds and the AMPTE and CRRES chemical release programs. The laboratory experiments provided spatially-distributed time-dependent measurements of total plasma density, temperature, and density fluctuation power spectra with the data confirming the long-theorized electron energization process in an expanding cloud - a result that was impossible to determine in spaceborne experiments (as e.g., in the CRRES program). These results provided the missing link in previous laboratory and spaceborne programs. confirming important elements in our understanding of such solar-terrestrial processes as manifested in expanding plasmas in the solar wind (e.g., CMES) and in ionospheric outflow in plasmaspheric fluctuate refilling after a storm. The energization signatures were seen in an entire series of runs that varied the ion species (Ar', Xe', Kr' and Ne'), and correlative studies included spectral analyses of electrostatic waves collocated with the energized electron distributions. In all cases wave energies were most intense during the times in which the suprathermal populations were present, with wave intensity increasing with the intensity of the suprathermal electron population. This is consistent with theoretical expectations wherein the energization process is directly attributable to wave particle interactions. No resonance conditions were observed, in an overall framework in which the general wave characteristics were broadband with power decreasing with increasing frequency.

  3. How to Handle Abuse

    Science.gov (United States)

    ... Handle Abuse KidsHealth / For Kids / How to Handle Abuse What's in this article? Tell Right Away How Do You Know Something Is Abuse? ... babysitter, teacher, coach, or a bigger kid. Child abuse can happen anywhere — at ... building. Tell Right Away A kid who is being seriously hurt ...

  4. Grain Handling and Storage.

    Science.gov (United States)

    Harris, Troy G.; Minor, John

    This text for a secondary- or postecondary-level course in grain handling and storage contains ten chapters. Chapter titles are (1) Introduction to Grain Handling and Storage, (2) Elevator Safety, (3) Grain Grading and Seed Identification, (4) Moisture Control, (5) Insect and Rodent Control, (6) Grain Inventory Control, (7) Elevator Maintenance,…

  5. Materials Handling. Module SH-01. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

  6. Back-to-Back Energization of a 60kV Cable Network - Inrush Currents Phenomenon

    DEFF Research Database (Denmark)

    Faria da Silva, Filipe; Bak, Claus Leth; Hansen, M. Lind

    2010-01-01

    On November 2008 the Danish government decided that all Danish transmission lines with a rated voltage equal to and below 150kV must be put underground, in order to reduce the visual pollution caused by Overhead Lines. This decision will lead to a massive use of underground cables in the Danish...... Network, and force a change in the approach used until now when planning, analyzing and operating electrical power systems. One problem that might arise is the energization of cables in parallel, as this operation may originate high inrush currents, which represent a risk to the circuit breakers connected...

  7. Sistema híbrido eólico-diesel para el abastecimiento de energía eléctrica de 20 cabañas turísticas en Cayo Caguamas. // Eolic-Diesel hybrid system for electric power supply of 20 tourist cabins in Caguamas Key.

    OpenAIRE

    R. Alarcón Fernández

    2001-01-01

    Se presentan los aspectos técnicos y económicos de la planificación de un sistema híbrido eólico-diesel para elabastecimiento de energía eléctrica de 20 cabañas turísticas en Cayo Caguamas. Se determina la demanda de energía y lacurva de carga de la instalación turística. Se dimensiona un sistema híbrido eólico-diesel formado por 6 aerogeneradores de10 kW y dos generadores Diesel de 75 kW cada uno. Finalmente se determina la influencia de la variación de algunosparámetros importantes sobre la...

  8. Estudio de la autosuficiencia energética de una vivienda unifamiliar

    OpenAIRE

    Zeggaf, Itimad

    2015-01-01

    El título del proyecto es “Estudio de la autosuficiencia energética de una vivienda unifamiliar”. Una vivienda energéticamente autosuficiente no puede depender de ningún tipo de compañía para satisfacer las necesidades energéticas del usuario. Este proyecto estudia las necesidades energéticas de una vivienda unifamiliar habitada por 4 personas, planteando una solución que abastezca sus necesidades energéticas mediante las energías renovables. También se estudia el aprovechamiento del agua ...

  9. Análisis DAFO del sector de la energía eólica en España

    Directory of Open Access Journals (Sweden)

    López-Vico, Victoria

    2009-06-01

    Full Text Available a energía eólica se ha convertido en un sector económico y energético clave en la actualidad, tanto en España como en el resto del mundo. Con el objetivo de saber si ésta energía puede responder a las necesidades de demanda energética, siendo una energía sustitutiva a los tradicionales combustibles fósiles, hemos realizado un análisis DAFO, donde se muestran las debilidades, amenazas, fortalezas y oportunidades de este sector en auge.Wind power has become a very important economic and power sector, as much in Spain as in the rest of the world. With the aim of knowing if this energy can respond to the energetic demand, being a substitute energy to traditional fossil fuels, we have realised a SWOT analysis, where we can know the strengths, threats, opportunities and weaknesses of this sector in full expansion.

  10. The power plant portal from handling to operation management - from control room to headquarters; Das Kraftwerksportal von der Bedienung bis zur Betriebsfuehrung - von der Warte bis zur Hauptverwaltung

    Energy Technology Data Exchange (ETDEWEB)

    Orth, J. [Produktmanagement, ABB, Mannheim (Germany); Lauxtermann, S. [Plant und Business Optimization, ABB, Minden (Germany)

    2005-07-01

    A power plant portal allows power and heat producers to make use of all the functionalities already available, while benefiting from the convenience of a consistent user interface philosophy. The system's range of functions by far exceeds the capabilities of traditional operating and monitoring systems and effectively integrates the procedures of information management, engineering and asset optimisation. Users have context-based direct access to plant- and company-wide information. A wide variety of PCS, DCS and power plant components can be monitored with the help of the integrated software modules. Asset optimisation features enable plant owners to minimise the costs of corrective and preventive maintenance measures. In addition, they support and optimise the workflow of maintenance and calibration activities. (orig.)

  11. La energía que requiere nuestro territorio

    OpenAIRE

    Pacheco, Máximo

    2015-01-01

    En esta columna de opinión, el Ministro de Energía nos invita a enfrentarnos a un problema crucial para un país como Chile: sin energía a precios razonables, esa desigualdad social que tanto criticamos terminará por expandirse. Pero a la vez el Ministro nos invita a cambiar el foco, y así «transformar la energía en un ecualizador de la igualdad», con un Estado más activo en la solución de esta crucial problemática. In this op-ed piece, the Minister of Energy invites us to face a crucial pr...

  12. Control Operator for the Two-Dimensional Energized Wave Equation

    Directory of Open Access Journals (Sweden)

    Sunday Augustus REJU

    2006-07-01

    Full Text Available This paper studies the analytical model for the construction of the two-dimensional Energized wave equation. The control operator is given in term of space and time t independent variables. The integral quadratic objective cost functional is subject to the constraint of two-dimensional Energized diffusion, Heat and a source. The operator that shall be obtained extends the Conjugate Gradient method (ECGM as developed by Hestenes et al (1952, [1]. The new operator enables the computation of the penalty cost, optimal controls and state trajectories of the two-dimensional energized wave equation when apply to the Conjugate Gradient methods in (Waziri & Reju, LEJPT & LJS, Issues 9, 2006, [2-4] to appear in this series.

  13. Spatially Localized Particle Energization by Landau Damping in Current Sheets

    Science.gov (United States)

    Howes, G. G.; Klein, K. G.; McCubbin, A. J.

    2017-12-01

    Understanding the mechanisms of particle energization through the removal of energy from turbulent fluctuations in heliospheric plasmas is a grand challenge problem in heliophysics. Under the weakly collisional conditions typical of heliospheric plasma, kinetic mechanisms must be responsible for this energization, but the nature of those mechanisms remains elusive. In recent years, the spatial localization of plasma heating near current sheets in the solar wind and numerical simulations has gained much attention. Here we show, using the innovative and new field-particle correlation technique, that the spatially localized particle energization occurring in a nonlinear gyrokinetic simulation has the velocity space signature of Landau damping, suggesting that this well-known collisionless damping mechanism indeed actively leads to spatially localized heating in the vicinity of current sheets.

  14. Human factors issues in fuel handling

    International Nuclear Information System (INIS)

    Beattie, J.D.; Iwasa-Madge, K.M.; Tucker, D.A.

    1994-01-01

    The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro's Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment

  15. Energía Minihidráulica

    OpenAIRE

    Mancebo Piqueras, José Antonio; Adrada Guerra, Teodoro; Martinez, Carmen

    2013-01-01

    La energía basada en turbinas hidráulicas de reducida potencia es, a menudo, un ejemplo- modelo dentro del campo de las energías renovables desde su aparición a finales del S. XIX, aunque los ingenios precursores surgen mucho antes. Entre los testimonios más antiguos destacan la saqia o rueda persa y la rueda hidráulica romana que había sido previamente implementada en Extremo Oriente, y que después llega a Europa a través de Egipto. Más tarde, durante la Edad Media y el Renacimiento, se gene...

  16. Energía y cambio climático

    OpenAIRE

    Wilfredo Bulege Gutiérrez

    2014-01-01

    Es claro que el crecimiento de la población, la extracción de materiales, la producción alimentaria y el incremento de energía para todas las actividades humanas nos conducen a un estado de colisión con las capacidades de la biosfera y los ecosistemas en el proceso de asegurar la provisión de bienes y servicios indispensables para la vida (1). La producción de energía convencional y contaminante es hoy una de las más graves en este escenario, tanto que la comunidad internacional y las potenci...

  17. Panorama energético mundial y argentino

    OpenAIRE

    Guadagni, Alieto

    2007-01-01

    Estamos transitando aceleradamente de una etapa caracterizada por energía abundante, barata y exportada a otra etapa signada por la escasez, el alto costo y las importaciones. Esta es la triple tenaza energética que enfrenta la Argentina. Los actuales precios del petróleo están impulsando la producción de biocombustibles (biodiesel y etanol) en Brasil, la Unión Europea y los Estados Unidos, pero también muchos otros países como el nuestro. Se estima que su participación en el consumo mundi...

  18. Handling Pyrophoric Reagents

    Energy Technology Data Exchange (ETDEWEB)

    Alnajjar, Mikhail S.; Haynie, Todd O.

    2009-08-14

    Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

  19. Remote handling equipment

    International Nuclear Information System (INIS)

    Clement, G.

    1984-01-01

    After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

  20. Ergonomics and patient handling.

    Science.gov (United States)

    McCoskey, Kelsey L

    2007-11-01

    This study aimed to describe patient-handling demands in inpatient units during a 24-hour period at a military health care facility. A 1-day total population survey described the diverse nature and impact of patient-handling tasks relative to a variety of nursing care units, patient characteristics, and transfer equipment. Productivity baselines were established based on patient dependency, physical exertion, type of transfer, and time spent performing the transfer. Descriptions of the physiological effect of transfers on staff based on patient, transfer, and staff characteristics were developed. Nursing staff response to surveys demonstrated how patient-handling demands are impacted by the staff's physical exertion and level of patient dependency. The findings of this study describe the types of transfers occurring in these inpatient units and the physical exertion and time requirements for these transfers. This description may guide selection of the most appropriate and cost-effective patient-handling equipment required for specific units and patients.

  1. EHV AC undergrounding electrical power performance and planning

    CERN Document Server

    Benato, Roberto

    2014-01-01

    Analytical methods of cable performance in EHV AC electrical power are discussed in this comprehensive reference. Descriptions of energization, power quality, cable safety constraints and more, guide readers in cable planning and power network operations.

  2. Energía y cambio climático

    Directory of Open Access Journals (Sweden)

    Wilfredo Bulege Gutiérrez

    2014-06-01

    Full Text Available Es claro que el crecimiento de la población, la extracción de materiales, la producción alimentaria y el incremento de energía para todas las actividades humanas nos conducen a un estado de colisión con las capacidades de la biosfera y los ecosistemas en el proceso de asegurar la provisión de bienes y servicios indispensables para la vida (1. La producción de energía convencional y contaminante es hoy una de las más graves en este escenario, tanto que la comunidad internacional y las potencias ya han empezado a dar muestras de preocupación por la seguridad energética y, con ello por la amenaza del cambio climático. En el actual cambio climático por primera vez se viene demostrando que la humanidad ha cambiado decisivamente un ciclo liberando CO2 a la atmósfera a través de la quema de combustibles fósiles y cambios en el uso del suelo por más de 500 000 años. El origen del cambio climático se remonta a dos grandes transformaciones en el uso de la energía. En primer lugar, la energía hidráulica fue reemplazada por el carbón, una fuente de energía condensada por la naturaleza a lo largo de millones de años. Fue el aprovechamiento del carbón para nuevas tecnologías lo que propulsó la revolución industrial y desató aumentos sin precedentes en la productividad. La segunda gran transformación ocurrió 150 años más tarde. El petróleo había sido una fuente de energía humana durante milenios. En China, por ejemplo, se registran pozos petroleros ya en el siglo IV. No obstante, la utilización del petróleo para los motores de combustión interna a comienzos del siglo XX marcó el inicio de una revolución en el transporte. La quema de carbón y petróleo, junto con el gas natural, ha transformado a las sociedades humanas al proveerle la energía impulsora de grandes aumentos en la riqueza y la productividad, pero también ha impulsado el cambio climático (2. La economía humana ha crecido vertiginosamente, se multiplic

  3. Future-oriented power distribution grid. Handling of up to 50% fluctuating power generation in 2020. Issue paper - working group G1; Denmark. Smart Grid Network; Fremtidssikring af elnettet. Haandtering af op til 50 pct. fluktuerende elproduktion i 2020. Issue paper, arbejdsgruppe G1

    Energy Technology Data Exchange (ETDEWEB)

    Soendergren, C.; Norsk Jensen, A. (Dansk Energi, Frederiksberg (Denmark)); OEstergaard, J. (Danmarks Tekniske Univ.. DTU Elektro, Kgs. Lyngby (Denmark)) (and others)

    2011-07-01

    The Smart Grid Network was established in 2010 by the Danish climate and energy minister tasked with developing recommendations for future actions and initiatives that make it possible to handle up to 50% electricity from wind energy in the power system in 2020. The task of working group 1 of the Smart Grid Network is stated as: ''The group will, building on existing surveys and analyses of structures and constraints in the Danish electricity system 2020, define concrete ideas on the technical and system development needs for the electricity supply system when the goal of intelligent integration of 50 percent power generated by renewable energy must be met. The group should come up with concrete suggestions on how to make the power system future-oriented, such as new network and management architectures, more measuring equipment, optical sensors, and new computer and communications systems that can monitor, control and operate the power system with the aim that the new intelligence can contribute to a reliable and cost-effective power system that can handle the deployment of renewable energy''. The working group has focused on a general description of the whole overall system needs and more specifically on the power grid and its management and control. (LN)

  4. En cumplimiento con la orden ejecutiva del presidente Trump sobre la Independencia Energética

    Science.gov (United States)

    Acciones reglamentarias tomadas por la EPA, incluyendo audiencias públicas, para implementar la Orden Ejecutiva sobre la Independencia Energética y la propuesta derogación del Plan de Energía Limpia.

  5. Handling of crisis situations in the electric power system; Krishantering i elsystemet. Elnaetbolags, kommuners och hushaalls uppfattningar om roller och ansvarsfoerdelning vid elavbrott

    Energy Technology Data Exchange (ETDEWEB)

    Palm, Jenny (Linkoepnig Univ., Linkoeping (SE). Dept. of Technology and Social Change)

    2007-12-15

    In this report municipalities, grid companies and electricity users' relations and responsibilities are discussed in connection to the actors experience during two storms named Per and Gudrun. Special focus is on households' action space, that is possibilities and constrains to uphold every day routines during outages. The material consists of case studies in Oestergoetland, involving a survey to households, interviews and participating observations. The theoretical perspective used is Karl Poppers' three worlds related to everyday life. World 1 is the physical and material world; World 2 consists of people's perception and ideas and World 3 is the cultural and social world. In world 1 is the importance of information and communication as well as spare power supply capacity discussed. Municipalities and grid companies emphasise Internet as an important communication tool. For the users the phone was the most important tool used during black-outs. One problem was however to get in contact with the energy company because of the overload on the companies' switchboard. Both the municipalities and the energy companies meant that they had enough spare power supply capacity. Around one third of the households said they had a portable generator to use during long lasting power outages. In relation to World 2 most households said that 12-24 hours power outages was acceptable, then the problems start for the households and they try to inform themselves of how long the outage will last. But some households never felt the need to contact anyone and they expressed a trust to the grid companies' competence to deal with the problems causing the outage. All actors state that the municipalities have a social responsibility to their citizens and must ensure that they do not suffer during outages. The grid companies' responsibilities according to the actors are to prevent power outages, repair damages and give the customers economical compensations

  6. Energized CO{sub 2} dry ice blast cleaning firmly grounded in the Canadian electrical industry

    Energy Technology Data Exchange (ETDEWEB)

    Lindsay, K.

    1999-02-01

    Development and use of energized carbon dioxide dry ice blast technology for cleaning electrical distribution system components by Oakville Hydro and Milton Hydro (both in Ontario) is discussed. The technology was developed by Alpheus Cleaning Technologies of California and Puget Sound Power and Light Company after a two-year study that commenced in 1991, and has been supplied in Canada by Wickens Industrial Ltd., since 1993 for cleaning various industrial and non-energized electrical applications in the automotive, printing , food processing and other manufacturing industries and hydro generating facilities. The unique cleaning dynamics of this technology allow for the removal of contaminants that are much more stubborn than those encountered in pad-mounted switchgear and other electrical apparatus. Dry ice pellets, by expanding to 400 times their solid state on impact, create a flushing action that helps to remove contaminants. No grit or solvents are required and the process is non-toxic. In using the process workers wear fire retardant clothing, 40 kV-Class 4 rubber gloves and full face shields. Dielectric tests are performed routinely to confirm the dielectric integrity of the spray wand components. A two stage inspection/trouble report is completed on every job. Use of this technology eliminates power interruptions to customers, improves system reliability and safety, reduces cleaning time to a minimum, and eliminated the need for reclamation of grit or solvent containment.

  7. Ponte en onda: prende la energía limpia, (Spanish) Get Current

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-05-01

    Cambiar a tecnologías de energía limpia significa que fortalecemos la economía y protegemos al medio ambiente. Este libreto de actividades educativas para todas las edades promueve el uso consciente de la energía, con datos de distintas formas de energía aplicables y una variedad de rompecabezas y crucigramas en temas energéticos.

  8. La educación energética una prioridad para el milenio

    Directory of Open Access Journals (Sweden)

    Johnn Edgar Castro

    2015-01-01

    Full Text Available Este articulo plantea la necesidad  de reflexionar y trabajar en el desarrollo de propuestas sobre educación energética, desde cuatro enfoques fundamentalmente: la primera de ellas  es la inevitable dependencia de las sociedades humanas de las fuentes de energía; el ahorro energético; el agotamiento de las fuentes de energía y por ultimo las consecuencias sobre el medioambiente

  9. Removal of phenol from water : a comparison of energization methods

    NARCIS (Netherlands)

    Grabowski, L.R.; Veldhuizen, van E.M.; Rutgers, W.R.

    2005-01-01

    Direct electrical energization methods for removal of persistent substances from water are under investigation in the framework of the ytriD-project. The emphasis of the first stage of the project is the energy efficiency. A comparison is made between a batch reactor with a thin layer of water and

  10. Practices of Handling

    DEFF Research Database (Denmark)

    Ræbild, Ulla

    to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...... introduces four ways whereby fashion designers apply their own bodies as tools for design; a) re-activating past garment-design experiences, b) testing present garment-design experiences c) probing for new garment-design experiences and d) design of future garment experiences by body proxy. The paper...

  11. Remote handling at LAMPF

    International Nuclear Information System (INIS)

    Grisham, D.L.; Lambert, J.E.

    1983-01-01

    Experimental area A at the Clinton P. Anderson Meson Physics Facility (LAMPF) encompasses a large area. Presently there are four experimental target cells along the main proton beam line that have become highly radioactive, thus dictating that all maintenance be performed remotely. The Monitor remote handling system was developed to perform in situ maintenance at any location within area A. Due to the complexity of experimental systems and confined space, conventional remote handling methods based upon hot cell and/or hot bay concepts are not workable. Contrary to conventional remote handling which require special tooling for each specifically planned operation, the Monitor concept is aimed at providing a totally flexible system capable of remotely performing general mechanical and electrical maintenance operations using standard tools. The Monitor system is described

  12. TRANSPORT/HANDLING REQUESTS

    CERN Multimedia

    Groupe ST/HM

    2002-01-01

    A new EDH document entitled 'Transport/Handling Request' will be in operation as of Monday, 11th February 2002, when the corresponding icon will be accessible from the EDH desktop, together with the application instructions. This EDH form will replace the paper-format transport/handling request form for all activities involving the transport of equipment and materials. However, the paper form will still be used for all vehicle-hire requests. The introduction of the EDH transport/handling request form is accompanied by the establishment of the following time limits for the various services concerned: 24 hours for the removal of office items, 48 hours for the transport of heavy items (of up to 6 metric tons and of standard road width), 5 working days for a crane operation, extra-heavy transport operation or complete removal, 5 working days for all transport operations relating to LHC installation. ST/HM Group, Logistics Section Tel: 72672 - 72202

  13. Experience of safety and performance improvement for fuel handling equipment

    International Nuclear Information System (INIS)

    Gyoon Chang, Sang; Hee Lee, Dae

    2014-01-01

    The purpose of this study is to provide experience of safety and performance improvement of fuel handling equipment for nuclear power plants in Korea. The fuel handling equipment, which is used as an important part of critical processes during the refueling outage, has been improved to enhance safety and to optimize fuel handling procedures. Results of data measured during the fuel reloading are incorporated into design changes. The safety and performance improvement for fuel handling equipment could be achieved by simply modifying the components and improving the interlock system. The experience provided in this study can be useful lessons for further improvement of the fuel handling equipment. (authors)

  14. Estudio energético del sistema eléctrico en Ecuador. Impulso a la Energía Solar Fotovoltaica

    OpenAIRE

    Eras Almeida, Andrea Alejandra

    2012-01-01

    La realización de este proyecto en base a la legislación que promueve el desarrollo de la energía limpia, pretende mostrar los cambios que tendrá la matriz energética del Ecuador si se impone un aporte renovable a la producción de energía y sus beneficios con sus futuros proyectos emblemáticos. Así también, pretende el impulso a la energía solar fotovolataica a nivel de construcciones fijas, con inversión privada y para beneficio de la sociedad misma.

  15. Evaluación del potencial energético del oleaje en Madagascar

    OpenAIRE

    Araujo Roso, Giovanni

    2017-01-01

    La energía undimotriz, o energía del oleaje, es aquella que aprovecha la energía cinética de la perturbación de la superficie del mar y está considerada como una fuente de gran potencial. Las ventajas de este tipo de recurso respecto a otras energías renovables son variadas: sus eventos son predecibles con detalle, el despliegue de dispositivos tiene un impacto visual inferior a otros y es un recurso inagotable, entre otros. Por otra parte, el campo de la energía del oleaje se ...

  16. Sistema de Aprovechamiento de la Energía de las Olas del Mar

    OpenAIRE

    Pi Amorós, Gabriel

    2010-01-01

    Este documento describe un sistema de aprovechamiento de la energía transportada por el oleaje o energía undimotriz. El sistema no transformará la energía únicamente en electricidad si no que aprovecha dicha electricidad para producir hidrógeno mediante el proceso de la electrólisis del agua de mar. Es decir, el sistema propuesto es un sistema de generación de hidrógeno de origen renovable a partir de una fuente de energía renovable, la energía undimotriz. Las característica...

  17. Safe handling of tritium

    International Nuclear Information System (INIS)

    1991-01-01

    The main objective of this publication is to provide practical guidance and recommendations on operational radiation protection aspects related to the safe handling of tritium in laboratories, industrial-scale nuclear facilities such as heavy-water reactors, tritium removal plants and fission fuel reprocessing plants, and facilities for manufacturing commercial tritium-containing devices and radiochemicals. The requirements of nuclear fusion reactors are not addressed specifically, since there is as yet no tritium handling experience with them. However, much of the material covered is expected to be relevant to them as well. Annex III briefly addresses problems in the comparatively small-scale use of tritium at universities, medical research centres and similar establishments. However, the main subject of this publication is the handling of larger quantities of tritium. Operational aspects include designing for tritium safety, safe handling practice, the selection of tritium-compatible materials and equipment, exposure assessment, monitoring, contamination control and the design and use of personal protective equipment. This publication does not address the technologies involved in tritium control and cleanup of effluents, tritium removal, or immobilization and disposal of tritium wastes, nor does it address the environmental behaviour of tritium. Refs, figs and tabs

  18. Grain Grading and Handling.

    Science.gov (United States)

    Rendleman, Matt; Legacy, James

    This publication provides an introduction to grain grading and handling for adult students in vocational and technical education programs. Organized in five chapters, the booklet provides a brief overview of the jobs performed at a grain elevator and of the techniques used to grade grain. The first chapter introduces the grain industry and…

  19. Mars Sample Handling Functionality

    Science.gov (United States)

    Meyer, M. A.; Mattingly, R. L.

    2018-04-01

    The final leg of a Mars Sample Return campaign would be an entity that we have referred to as Mars Returned Sample Handling (MRSH.) This talk will address our current view of the functional requirements on MRSH, focused on the Sample Receiving Facility (SRF).

  20. Handling wood shavings

    Energy Technology Data Exchange (ETDEWEB)

    1974-09-18

    Details of bulk handling equipment suitable for collection and compressing wood waste from commercial joinery works are discussed. The Redler Bin Discharger ensures free flow of chips from storage silo discharge prior to compression into briquettes for use as fuel or processing into chipboard.

  1. Pick-up ion energization at the termination shock

    Energy Technology Data Exchange (ETDEWEB)

    Gary, S Peter [Los Alamos National Laboratory; Winske, Dan [Los Alamos National Laboratory; Wu, Pin [BOSTON UNIV.; Schwadron, N A [BOSTON UNIV.

    2009-01-01

    One-dimensional hybrid simulations are used to investigate how pickup ions are energized at the perpendicular termination shock. Contrary to previous models based on pickup ion energy gain by repeated crossings of the shock front (shock surfing) or due to a reforming shock front, the present simulations show that pickup ion energy gain involves a gyro-phasedependent interaction with the inhomogeneous motional electric field at the shock. The process operates at all relative concentrations of pickup ion density.

  2. Radiological safety aspects of handling plutonium

    International Nuclear Information System (INIS)

    Sundararajan, A.R.

    2016-01-01

    Department of Atomic Energy in its scheme of harnessing the nuclear energy for electrical power generation and strategic applications has given a huge role to utilization of plutonium. In the power production programme, fast reactors with plutonium as fuel are expected to play a major role. This would require establishing fuel reprocessing plants to handle both thermal and fast reactor fuels. So in the nuclear fuel cycle facilities variety of chemical, metallurgical, mechanical operations have to be carried out involving significant inventories of "2"3"9 Pu and associated radionuclides. Plutonium is the most radiotoxic radionuclide and therefore any facility handling it has to be designed and operated with utmost care. Two problems of major concern in the protection of persons working in plutonium handling facilities are the internal exposure to the operating personnel from uptake of plutonium and transplutonic nuclides as they are highly radiotoxic and the radiation exposure of hands and eye lens during fuel fabrication operations especially while handling recycled high burn up plutonium. In view of the fact that annual limit for intake is very small for "2"3"9Pu and its radiation emission characteristics are such that it is a huge challenge for the health physicists to detect Pu in air and in workers. This paper discusses the principles and practices followed in providing radiological surveillance to workers in plutonium handling areas. The challenges in protecting the workers from receiving exposures to hands and eye lens in handling high burn up plutonium are also discussed. The sites having Pu fuel cycle facilities should have trained medical staff to handle cases involving excessive intake of plutonium. (author)

  3. Monitoring, Analyzing and Assessing Radiation Belt Loss and Energization

    Science.gov (United States)

    Daglis, I.; Balasis, G.; Bourdarie, S.; Horne, R.; Khotyaintsev, Y.; Mann, I.; Santolik, O.; Turner, D.; Anastasiadis, A.; Georgiou, M.; Giannakis, O.; Papadimitriou, C.; Ropokis, G.; Sandberg, I.; Angelopoulos, V.; Glauert, S.; Grison, B., Kersten T.; Kolmasova, I.; Lazaro, D.; Mella, M.; Ozeke, L.; Usanova, M.

    2013-09-01

    We present the concept, objectives and expected impact of the MAARBLE (Monitoring, Analyzing and Assessing Radiation Belt Loss and Energization) project, which is being implemented by a consortium of seven institutions (five European, one Canadian and one US) with support from the European Community's Seventh Framework Programme. The MAARBLE project employs multi-spacecraft monitoring of the geospace environment, complemented by ground-based monitoring, in order to analyze and assess the physical mechanisms leading to radiation belt particle energization and loss. Particular attention is paid to the role of ULF/VLF waves. A database containing properties of the waves is being created and will be made available to the scientific community. Based on the wave database, a statistical model of the wave activity dependent on the level of geomagnetic activity, solar wind forcing, and magnetospheric region will be developed. Multi-spacecraft particle measurements will be incorporated into data assimilation tools, leading to new understanding of the causal relationships between ULF/VLF waves and radiation belt dynamics. Data assimilation techniques have been proven as a valuable tool in the field of radiation belts, able to guide 'the best' estimate of the state of a complex system. The MAARBLE (Monitoring, Analyzing and Assessing Radiation Belt Energization and Loss) collaborative research project has received funding from the European Union’s Seventh Framework Programme (FP7-SPACE-2011-1) under grant agreement no. 284520.

  4. Test sample handling apparatus

    International Nuclear Information System (INIS)

    1981-01-01

    A test sample handling apparatus using automatic scintillation counting for gamma detection, for use in such fields as radioimmunoassay, is described. The apparatus automatically and continuously counts large numbers of samples rapidly and efficiently by the simultaneous counting of two samples. By means of sequential ordering of non-sequential counting data, it is possible to obtain precisely ordered data while utilizing sample carrier holders having a minimum length. (U.K.)

  5. Handling and Transport Problems

    Energy Technology Data Exchange (ETDEWEB)

    Pomarola, J. [Head of Technical Section, Atomic Energy Commission, Saclay (France); Savouyaud, J. [Head of Electro-Mechanical Sub-Division, Atomic Energy Commission, Saclay (France)

    1960-07-01

    Arrangements for special or dangerous transport operations by road arising out of the activities of the Atomic Energy Commission are made by the Works and Installations Division which acts in concert with the Monitoring and Protection Division (MPD) whenever radioactive substances or appliances are involved. In view of the risk of irradiation and contamination entailed in handling and transporting radioactive substances, including waste, a specialized transport and storage team has been formed as a complement to the emergency and decontamination teams.

  6. Solid waste handling

    International Nuclear Information System (INIS)

    Parazin, R.J.

    1995-01-01

    This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.)

  7. Handling of radioactive waste

    International Nuclear Information System (INIS)

    Sanhueza Mir, Azucena

    1998-01-01

    Based on characteristics and quantities of different types of radioactive waste produced in the country, achievements in infrastructure and the way to solve problems related with radioactive waste handling and management, are presented in this paper. Objectives of maintaining facilities and capacities for controlling, processing and storing radioactive waste in a conditioned form, are attained, within a great range of legal framework, so defined to contribute with safety to people and environment (au)

  8. Renal phosphate handling: Physiology

    Directory of Open Access Journals (Sweden)

    Narayan Prasad

    2013-01-01

    Full Text Available Phosphorus is a common anion. It plays an important role in energy generation. Renal phosphate handling is regulated by three organs parathyroid, kidney and bone through feedback loops. These counter regulatory loops also regulate intestinal absorption and thus maintain serum phosphorus concentration in physiologic range. The parathyroid hormone, vitamin D, Fibrogenic growth factor 23 (FGF23 and klotho coreceptor are the key regulators of phosphorus balance in body.

  9. Uranium hexafluoride handling

    International Nuclear Information System (INIS)

    1991-01-01

    The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF 6 from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride

  10. Uranium hexafluoride handling. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.

  11. Torus sector handling system

    International Nuclear Information System (INIS)

    Grisham, D.L.

    1981-01-01

    A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

  12. Handling of Solid Residues

    International Nuclear Information System (INIS)

    Medina Bermudez, Clara Ines

    1999-01-01

    The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

  13. Estudio para la automatización de la lectura, corte y reconexión de la energía eléctrica mediante tecnología PLC (Power Line Communication). Caso de análisis : Empresa Eléctrica Regional CentroSur C.A.

    OpenAIRE

    Quizhpi Montero, Diego Armando; Ruiz Orellana, José Luis

    2007-01-01

    La finalidad de esta tesis es entregar una mayor información sobre la tecnología PLC, como sus bases teóricas y de cómo aprovecha el tendido de red eléctrica para la lectura, corte y reconexión de los contadores de energía eléctrica mediante la utilización de equipos adecuados. La tecnología PLC también permite ofrecer una diversidad de servicios de telecomunicaciones, tales como: voz, video y datos, el cual se lo conoce como triple-play. Al momento de transmitir datos por el tendido el...

  14. Human factors issues in fuel handling

    Energy Technology Data Exchange (ETDEWEB)

    Beattie, J D; Iwasa-Madge, K M; Tucker, D A [Humansystems Inc., Milton, ON (Canada)

    1994-12-31

    The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro`s Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment. 1 fig., 4 tabs., 19 refs.

  15. Combined treatment of SO2 and high resistivity fly ash using a pulse energized electron reactor

    International Nuclear Information System (INIS)

    Mizuno, A.; Clements, J.S.; Davis, R.H.

    1984-01-01

    The combined removal of SO 2 and high resistivity fly ash has been demonstrated in a pulse energized electron reactor (PEER). The PEER system which was originally developed for the removal of SO 2 utilizes a positive pulse streamer corona discharge in a non-uniform field geometry. In performance tests on SO 2 , more than 90% was removed with an advantageously small power requirement. Combined treatment performance was demonstrated by introducing high resistivity fly ash into the test gas and the PEER is significantly more efficient than a conventional electrostatic precipitator operated with a dc voltage. Observations show that the PEER agglomerates the fly ash and further that the SO 2 removal efficiency is improved by the presence of fly ash. The electrode configuration and performance results make retrofit consideration attractive

  16. Preference Handling for Artificial Intelligence

    OpenAIRE

    Goldsmith, Judy; University of Kentucky; Junker, Ulrich; ILOG

    2009-01-01

    This article explains the benefits of preferences for AI systems and draws a picture of current AI research on preference handling. It thus provides an introduction to the topics covered by this special issue on preference handling.

  17. Crud handling circuit

    International Nuclear Information System (INIS)

    Smith, J.C.; Manuel, R.J.; McAllister, J.E.

    1981-01-01

    A process for handling the problems of crud formation during the solvent extraction of wet-process phosphoric acid, e.g. for uranium and rare earth removal, is described. It involves clarification of the crud-solvent mixture, settling, water washing the residue and treatment of the crud with a caustic wash to remove and regenerate the solvent. Applicable to synergistic mixtures of dialkylphosphoric acids and trialkylphosphine oxides dissolved in inert diluents and more preferably to the reductive stripping technique. (U.K.)

  18. Handling of potassium

    International Nuclear Information System (INIS)

    Schwarz, N.; Komurka, M.

    1983-03-01

    As a result for the Fast Breeder Development extensive experience is available worldwide with respect to Sodium technology. Due to the extension of the research program to topping cycles with Potassium as the working medium, test facilities with Potassium have been designed and operated in the Institute of Reactor Safety. The different chemical properties of Sodium and Potassium give rise in new safety concepts and operating procedures. The handling problems of Potassium are described in the light of theoretical properties and own experiences. Selected literature on main safety and operating problems complete this report. (Author) [de

  19. Development of tritium-handling technique

    International Nuclear Information System (INIS)

    Ohmura, Hiroshi; Hosaka, Akio; Okamoto, Takahumi

    1988-01-01

    The overview of developing activities for tritium-handling techniques in IHI are presented. To establish a fusion power plant, tritium handling is one of the key technologies. Recently in JAERI, conceptual design of FER (Fusion Experimental Reactor) has been carried out, and the FER system requires a processing system for a large amount of tritium. IHI concentrate on investigation of fuel gas purification, isotope separation and storage systems under contract with Toshiba Corporation. Design results of the systems and each components are reviewed. IHI has been developing fundamental handling techniques which are the ZrNi bed for hydrogen isotope storage and isotope separation by laser. The ZrNi bed with a tritium storage capacity of 1000 Ci has been constructed and recovery capability of the hydrogen isotope until 10 -4 Torr {0.013 Pa} was confirmed. In laser isotope separation, the optimum laser wave length has been determined. (author)

  20. La energía humana el esfuerzo físico

    Directory of Open Access Journals (Sweden)

    Luis Suárez Flórez

    1991-01-01

    Full Text Available Se llama la atención sobre la energía humana, su importancia como elemento de productividad y como principio ó quizás como fin de la actividad deportiva. Se estudia el máximo esfuerzo físico, así como también algunos conceptos acerca de la energía aeróbica y la energía anaeróbica.

  1. Energization of Long HVAC Cables in Parallel - Analysis and Estimation Formulas

    DEFF Research Database (Denmark)

    Silva, Filipe Faria Da; Bak, Claus Leth

    2012-01-01

    The installation of long HVAC cables has recently become more common and it tends to increase during the next years. Consequently, the energization of long HVAC cables in parallel is also a more common condition. The energization of HVAC cables in parallel resembles the en-ergization of capacitor...... has several simplifications and does not always provide accurate results. This paper proposes a new formula that can be used for the estimation of these two quantities for two HVAC cables in parallel....

  2. How to handle station black outs

    International Nuclear Information System (INIS)

    Reisch, Frigyes

    1986-01-01

    Station black out is defined as the loss of ail high voltage alternating current at a nuclear power site. An international study was made to survey the practices in the different countries. The best way to handle station black out is to avoid it therefore briefly the normal off site and emergency on site power supplies are discussed. The ways in use to enhance nuclear power plants using Boiling Water Reactors or Pressurized Water Reactors to cope with a station black out are discussed in some detail. (author)

  3. How to handle station black outs

    Energy Technology Data Exchange (ETDEWEB)

    Reisch, Frigyes [Swedish Nuclear Power Inspectorate, S-10252 Stockholm (Sweden)

    1986-02-15

    Station black out is defined as the loss of ail high voltage alternating current at a nuclear power site. An international study was made to survey the practices in the different countries. The best way to handle station black out is to avoid it therefore briefly the normal off site and emergency on site power supplies are discussed. The ways in use to enhance nuclear power plants using Boiling Water Reactors or Pressurized Water Reactors to cope with a station black out are discussed in some detail. (author)

  4. Energía Undimotriz, alternativa para la producción de Energía Eléctrica en la Provincia de Santa Elena

    Directory of Open Access Journals (Sweden)

    Rolando Calero

    2015-10-01

    Full Text Available La energía undimotriz, es la energía que permite obtener electricidad a partir de energía mecánica generada por el movimiento de las olas. Es uno de los tipos de energías renovables con más recientes estudios, y presenta enormes ventajas frente a otras energías renovables debido a que se tendría mayor facilidad para predecir condiciones geológicas óptimas que permitan la mayor eficiencia en sus procesos. Debido a que es más fácil llegar a predecir condiciones óptimas de oleaje, en comparación con la obtenida con  los vientos para obtener energía eólica, donde su variabilidad es menor.En este trabajo se espera aportar y dilucidar con datosespecíficos sobre la morfología de la zonamarítima en la provincia de Santa Elena, tratando depredecir si las características propias del lugar son idóneas  para producir electricidad en base a la implementación de energíaundimotriz, como fuente renovable no convencional utilizando las tecnologías actuales para este propósito.

  5. Obtención de energía a partir de las corrientes marinas

    OpenAIRE

    Echeverría Cabodevilla, Álvaro

    2017-01-01

    El objetivo del proyecto es evaluar la viabilidad de una granja de energía hidrocinética en los territorios marinos españoles. Como se puede observar en el desarrollo del estudio, el resultado es negativo. En España no existe una gran zona que pueda ser utilizada para crear una granja de energía hidrocinética. La energía hidrocinética es aquella que utiliza la energía cinética del agua marina para obtener electricidad, principalmente los movimientos de agua de las corrientes ma...

  6. Auditoría energética en una planta de tratamiento de agua potable

    OpenAIRE

    Díaz Álvarez, Silvino

    2012-01-01

    En el panorama energético actual, con las recientes incertidumbres asociadas a los precios de la energía y las inestabilidades políticas en algunos países exportadores de hidrocarburos, reducir el consumo energético mediante tecnologías más eficientes es fundamental en la definición de nuevos usos de la energía en nuestra sociedad. Dada la actual coyuntura medioambiental, económica y social, hemos de encontrar un nuevo modelo de desarrollo sostenible, incrementando la productividad de nuestra...

  7. La Demanda Residencial por Energía Eléctrica en Chile

    OpenAIRE

    Claudio A Agostini; Cecilia Plottier; Eduardo Saavedra

    2011-01-01

    En un contexto de demanda creciente y oferta estocástica de energía en Chile se hace necesario conocer a cabalidad los determinantes de la demanda por energía eléctrica de los hogares - en particular su elasticidad precio - para así utilizar mecanismos de flexibilización de precios con miras a reducir posibles déficits de energía. Este trabajo estima la demanda de energía eléctrica residencial usando información de la Encuesta de Caracterización Socioeconómica Nacional (CASEN) 2006, siendo in...

  8. Medidas de mejora de la eficiencia energética de edificios residenciales

    OpenAIRE

    Hernández Sánchez, Juan Manuel

    2012-01-01

    El parque de edificios residenciales existente tiene un potencial muy grande para mejorar la eficiencia energética a corto y medio plazo, debido al gran número de viviendas existentes y a su larga vida residual. Los factores que influyen directamente en el consumo energético y en las emisiones asociadas a los edificios residenciales son: la envolvente térmica, la eficiencia energética de los equipos, las fuentes energéticas utilizadas y el comportamiento de los usuarios. Las barreras qu...

  9. Importancia de las energías renovables en la seguridad energética y su relación con el crecimiento económico.

    Directory of Open Access Journals (Sweden)

    Lilian Paola Umbarila Valencia

    2015-12-01

    Full Text Available La creciente demanda de las necesidades sociales a nivel global, impulsada por los hábitos de vida y la forma en la que se organizan las regiones ha llevado al crecimiento paralelo de la industria y con ello al creciente aumento del consumo de energía. Este artículo de investigación reflexiona acerca de la relevancia que tienen las energías renovables para la seguridad energética, teniendo en cuenta la inestabilidad de los precios del petróleo y su influencia en el mercado de los hidrocarburos como fuente primaria de energía. Se evidencian los avances que han tenido las tecnologías de energías renovables a nivel global, regional y local y el rol que juegan en la independencia energética y en la mitigación del impacto ambiental. Se concluye que las naciones deben buscar la optimización de las energías renovables desde los ámbitos: local, regional y global propendiendo por su uso adecuado desde la legislación. El futuro de las energías renovables está dado por la rentabilidad, ya que para que el uso de éstas siga creciendo, deben seguir atrayendo capital lo cual significa que los inversores deben ver una rentabilidad competitiva. Otra recomendación importante es la integración de la energía renovable en la red, incluyendo fuentes de generación intermitentes e incluso imprevisibles. 

  10. Effective handling of software anomalies in computer based systems at nuclear power plants. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

    International Nuclear Information System (INIS)

    2000-03-01

    This report reviews possible types of anomalies that are related to software in nuclear power plants, outlines techniques that can be used to identify anomalies throughout the entire software life-cycle, and discusses important issues that must be considered during anomaly investigation and resolution. Typically, anomalies are identified, investigated and resolved during the normal process of developing or maintaining plant software, where these activities are covered by procedures and tools that are part of this process. Nevertheless, to reduce the number and impact of anomalies under plant operating conditions, it is important to ensure that good plans, procedures and tools are in place throughout the software life-cycle. The need for this was pointed out by the IAEA International Working Group on Nuclear Power Plant Control and Instrumentation (IWG-NPPCI). The report is the result of a series of consultants meetings held by the IAEA in 1997 and 1998 in Vienna. It was prepared with the participation and contributions of experts from Austria, Canada, Germany, Hungary, the United Kingdom and the United States of America. The scope of activities described in this report covers a methodology for anomaly identification, anomaly investigation and anomaly resolution. The activities to be done within these steps strongly depend on the safety category of the software, the actual life-cycle phase of the software, the type of the software and the severity of the anomaly

  11. Radiation signatures from a locally energized flaring loop

    Science.gov (United States)

    Emslie, A. G.; Vlahos, L.

    1980-01-01

    The radiation signatures from a locally energized solar flare loop based on the physical properties of the energy release mechanisms were consistent with hard X-ray, microwave, and EUV observations for plausible source parameters. It was found that a suprathermal tail of high energy electrons is produced by the primary energy release, and that the number of energetic charged particles ejected into the interplanetary medium in the model is consistent with observations. The radiation signature model predicts that the intrinsic polarization of the hard X-ray burst should increase over the photon energy range of 20 to 100 keV.

  12. La energía minihidráulica en los planes de fomento de las energías renovables en España

    OpenAIRE

    Espejo Marín, Cayetano; García Marín, Ramón; Aparicio Guerrero, Ana Eulalia

    2016-01-01

    La energía minihidráulica incluye las centrales con una potencia instalada de hasta 10 megavatios. Esta tecnología de producción energética se ha incluido en los Planes de Fomento de las Energías Renovables promovidos por los Gobiernos de España desde finales de los años noventa a la actualidad. En esta aportación se analizan los objetivos de potencia a instalar en cada Comunidad Autónoma durante el periodo de vigencia de cada Plan, las barreras con las que se encuentra el sector para el desa...

  13. Conocimiento de Energía: Principios Esenciales y Conceptos Fundamentales para la Educación de Energía

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-06-01

    This is the Spanish version of our Energy Literacy guidebook. Esta guía presenta conceptos de energía que, cuando se entienden y se aplican, ayudan a individuos y a comunidades a tomar decisiones sobre la energía con conocimiento de causa. No es un currículo sino que ofrece un marco sobre el cual puede basarse un plan de estudios. La guía se dirige a cualquier persona que participe en la educación de energía.

  14. Remote handling in ZEPHYR

    International Nuclear Information System (INIS)

    Andelfinger, C.; Lackner, E.; Ulrich, M.; Weber, G.; Schilling, H.B.

    1982-04-01

    A conceptual design of the ZEPHYR building is described. The listed radiation data show that remote handling devices will be necessary in most areas of the building. For difficult repair and maintenance works it is intended to transfer complete units from the experimental hall to a hot cell which provides better working conditions. The necessary crane systems and other transport means are summarized as well as suitable commercially available manipulators and observation devices. The conept of automatic devices for cutting and welding and other operations inside the vacuum vessel and the belonging position control system is sketched. Guidelines for the design of passive components are set up in order to facilitate remote operation. (orig.)

  15. Handling hunger strikers.

    Science.gov (United States)

    1992-04-01

    Hunger strikes are being used increasingly and not only by those with a political point to make. Whereas in the past, hunger strikes in the United Kingdom seemed mainly to be started by terrorist prisoners for political purposes, the most recent was begun by a Tamil convicted of murder, to protest his innocence. In the later stages of his strike, before calling it off, he was looked after at the Hammersmith Hospital. So it is not only prison doctors who need to know how to handle a hunger strike. The following guidelines, adopted by the 43rd World Medical Assembly in Malta in November 1991, are therefore a timely reminder of the doctor's duties during a hunger strike.

  16. MFTF exception handling system

    International Nuclear Information System (INIS)

    Nowell, D.M.; Bridgeman, G.D.

    1979-01-01

    In the design of large experimental control systems, a major concern is ensuring that operators are quickly alerted to emergency or other exceptional conditions and that they are provided with sufficient information to respond adequately. This paper describes how the MFTF exception handling system satisfies these requirements. Conceptually exceptions are divided into one of two classes. Those which affect command status by producing an abort or suspend condition and those which fall into a softer notification category of report only or operator acknowledgement requirement. Additionally, an operator may choose to accept an exception condition as operational, or turn off monitoring for sensors determined to be malfunctioning. Control panels and displays used in operator response to exceptions are described

  17. Plutonium safe handling

    International Nuclear Information System (INIS)

    Tvehlov, Yu.

    2000-01-01

    The abstract, prepared on the basis of materials of the IAEA new leadership on the plutonium safe handling and its storage (the publication no. 9 in the Safety Reports Series), aimed at presenting internationally acknowledged criteria on the radiation danger evaluation and summarizing the experience in the safe management of great quantities of plutonium, accumulated in the nuclear states, is presented. The data on the weapon-class and civil plutonium, the degree of its danger, the measures for provision of its safety, including the data on accident radiation consequences with the fission number 10 18 , are presented. The recommendations, making it possible to eliminate the super- criticality danger, as well as ignition and explosion, to maintain the tightness of the facility, aimed at excluding the radioactive contamination and the possibility of internal irradiation, to provide for the plutonium security, physical protection and to reduce irradiation are given [ru

  18. Handle with care

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1965-03-15

    Full text: A film dealing with transport of radioactive materials by everyday means - rail, road, sea and air transport - has been made for IAEA. It illustrates in broad terms some of the simple precautions which should be followed by persons dealing with such materials during shipment. Throughout, the picture stresses the transport regulations drawn up and recommended by the Agency, and in particular the need to carry out carefully the instructions based on these regulations in order to ensure that there is no hazard to the public nor to those who handle radioactive materials in transit and storage. In straightforward language, the film addresses the porter of a goods wagon, an airline cargo clerk, a dockside crane operator, a truck driver and others who load and ship freight. It shows the various types of package used to contain different categories of radioactive substances according to the intensity of the radiation emitted. It also illustrates their robustness by a series of tests involving drops, fires, impact, crushing, etc. Clear instructions are conveyed on what to do in the event of an unlikely accident with any type of package. The film is entitled, 'The Safe Transport of Radioactive Materials', and is No. 3 in the series entitled, 'Handle with Care'. It was made for IAEA through the United Kingdom Atomic Energy Authority by the Film Producers' Guild in the United Kingdom. It is in 16 mm colour, optical sound, with a running time of 20 minutes. It is available for order at $50 either direct from IAEA or through any of its Member Governments. Prints can be supplied in English, French, Russian or Spanish. Copies are also available for adaptation for commentaries in other languages. (author)

  19. Modelización de materiales piezoeléctricos como generadores de energía

    Directory of Open Access Journals (Sweden)

    Vázquez Rodríguez, M.

    2012-02-01

    Full Text Available This paper presents the method to determine electrical equivalent models of piezoelectric materials used as electric power generating elements. The models developed from the experimental results have been used to obtain the type, amount and optimal topological structure of semiconductor elements needed in the input stage of the power generation system, and its behaviour under variable power supply demand.

    En este trabajo se presenta el estudio realizado para determinar los modelos eléctricos equivalentes de materiales de tipo piezoeléctrico, para evaluar su capacidad como elementos generadores de energía eléctrica. Los diferentes modelos desarrollados a partir de los resultados experimentales registrados, se han utilizado para obtener la estructura óptima de elementos semiconductores a utilizar en la etapa de entrada del sistema de generación y acumulación de energía eléctrica, teniendo en cuenta su morfología, tipo de semiconductor a utilizar y número necesario, así como su comportamiento ante una demanda variable de potencia a suministrar

  20. Seguridad energética rusa: entre Europa y China

    Directory of Open Access Journals (Sweden)

    Antonio Sánchez

    2008-05-01

    Full Text Available Dentro de la seguridad energética rusa aparece como una debilidad importante la concentración de recursos en unos pocos clientes, en concreto en la UE. Por este motivo, las autoridades rusas están tratando de diversificar destinos de venta, tratando de abrir otros mercados, en especial en extremo oriente y, en particular en China. Esto acrecienta su seguridad energética, pero debilita la europea en caso de que la UE no adopte medidas activas. El abastecimiento a Europa desde Rusia, especialmente de gas, depende también de tres grandes limitaciones. En primer lugar, que existan nuevos yacimientos y su posibilidad de movilizarlos conforme aumenten las necesidades europeas. En segundo lugar, aparece el problema del surgimiento de competidores por el gas ruso y, en particular, recientemente se ha subrayado el papel de China como futuro cliente de gas ruso. En tercer lugar, se encuentra la posibilidad de que Rusia pueda ejercer un control especial sobre la oferta de gas mundial, que condicione en cantidad o/y precio el abastecimiento a Europa.

  1. Particle energization by inertial Alfven wave in auroral ionosphere

    Science.gov (United States)

    Kumar, S.

    2017-12-01

    The role of inertial Alfven wave in auroral acceleration region and in the inertial regime to energize the plasma particles is an interesting field and widely discussed observationally as well as theoretically in recent years. In this work, we present the density perturbations by inertial Alfvén wave (AW) in the auroral ionosphere. We obtain dynamical equations for inertial AW and fast mode of AW using two-fluid model and then solve them numerically in order to analyze the localized structures and cavity formation. The ponderomotive force due to the high frequency inertial AW changes the background density and is believed to be responsible for the wave localization or for the formation of density cavities in auroral ionosphere. These density cavities are believed to be the sites for particle energization. This perturbed density channel grow with time until the modulation instability acquires steady state. We find that the density cavities are accompanied by the high amplitude magnetic fields. The amplitude of the strongest density cavity is estimated as ˜ 0.26n0 (n0 is unperturbed plasma number density). The results presented here are found consistent with the observational studies using FAST spacecraft.

  2. Unvented Drum Handling Plan

    International Nuclear Information System (INIS)

    MCDONALD, K.M.

    2000-01-01

    This drum-handling plan proposes a method to deal with unvented transuranic drums encountered during retrieval of drums. Finding unvented drums during retrieval activities was expected, as identified in the Transuranic (TRU) Phase I Retrieval Plan (HNF-4781). However, significant numbers of unvented drums were not expected until excavation of buried drums began. This plan represents accelerated planning for management of unvented drums. A plan is proposed that manages unvented drums differently based on three categories. The first category of drums is any that visually appear to be pressurized. These will be vented immediately, using either the Hanford Fire Department Hazardous Materials (Haz. Mat.) team, if such are encountered before the facilities' capabilities are established, or using internal capabilities, once established. To date, no drums have been retrieved that showed signs of pressurization. The second category consists of drums that contain a minimal amount of Pu isotopes. This minimal amount is typically less than 1 gram of Pu, but may be waste-stream dependent. Drums in this category are assayed to determine if they are low-level waste (LLW). LLW drums are typically disposed of without venting. Any unvented drums that assay as TRU will be staged for a future venting campaign, using appropriate safety precautions in their handling. The third category of drums is those for which records show larger amounts of Pu isotopes (typically greater than or equal to 1 gram of Pu). These are assumed to be TRU and are not assayed at this point, but are staged for a future venting campaign. Any of these drums that do not have a visible venting device will be staged awaiting venting, and will be managed under appropriate controls, including covering the drums to protect from direct solar exposure, minimizing of container movement, and placement of a barrier to restrict vehicle access. There are a number of equipment options available to perform the venting. The

  3. The handling of radiation accidents

    International Nuclear Information System (INIS)

    1977-01-01

    The symposium was attended by 204 participants from 39 countries and 5 international organizations. Forty-two papers were presented in 8 sessions. The purpose of the meeting was to foster an exchange of experiences gained in establishing and exercising plans for mitigating the effects of radiation accidents and in the handling of actual accident situations. Only a small number of accidents were reported at the symposium, and this reflects the very high standards of safety that has been achieved by the nuclear industry. No accidents of radiological significance were reported to have occurred at commercial nuclear power plants. Of the accidents reported, industrial radiography continues to be the area in which most of the radiation accidents occur. The experience gained in the reported accident situations served to confirm the crucial importance of the prompt availability of medical and radiological services, particularly in the case of uptake of radioactive material, and emphasized the importance of detailed investigation into the causes of the accident in order to improve preventative measures. One of the principal themes of the symposium involved emergency procedures related to nuclear power plant accidents, and several papers defining the scope, progression and consequences of design base accidents for both thermal and fast reactor systems were presented. These were complemented by papers defining the resultant protection requirements that should be satisfied in the establishment of plans designed to mitigate the effects of the postulated accident situations. Several papers were presented describing existing emergency organizational arrangements relating both to specific nuclear power plants and to comprehensive national schemes, and a particularly informative session was devoted to the topic of training of personnel in the practical conduct of emergency arrangements. The general feeling of the participants was one of studied confidence in the competence and

  4. New transport and handling contract

    CERN Multimedia

    SC Department

    2008-01-01

    A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319

  5. Ahorre Energía: Consejos sobre el ahorro de dinero y energía en el hogar (Spanish Brochure), Energy Savers Guide

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-09-01

    La versión en castellano de la guía del Departamento de Energía de los Estados Unidos que ayuda a consumidores a ahorrar energía y dinero en el hogar y en las carreteras. The Spanish-language version of U.S. Department of Energy's consumer guide to saving energy and money at home and on the road.

  6. Ahorre Energía: Consejos para ahorro dinero y energía en su hogar (Spanish Brochure), Energy Saver Guide

    Energy Technology Data Exchange (ETDEWEB)

    None

    2017-11-01

    La versión en castellano de la guía del Departamento de Energía de los Estados Unidos que ayuda a consumidores a ahorrar energía y dinero en su hogar y en las carreteras. The Spanish-language version of U.S. Department of Energy's Energy Saver consumer guide to saving energy and money at home and on the road.

  7. El futuro energético de Japón

    Directory of Open Access Journals (Sweden)

    María Francisca Casado

    2016-05-01

    Full Text Available Tras el triple desastre del 11 de marzo de 2011, Japón se encuentra en una encrucijada energética. A corto y medio plazo depende de las importaciones de combustibles fósiles para garantizar su seguridad energética, pero el largo plazo está por decidir y lo determinarán las decisiones que tome en estos años. Como consta en su Estrategia de Seguridad Nacional, para Japón la seguridad energética es una cuestión de seguridad nacional. El artículo revisa la trayectoria nuclear nipona, estudia cuáles son los factores que configuran el mercado eléctrico japonés y analiza su actual situación energética. Por otra parte, también repasa los principios que han marcado su política energética, deteniéndose a evaluar los dos últimos Planes Estratégicos de Energía –uno anterior y otro posterior a Fukushima- antes de adentrarse en el debate sobre la composición óptima del futuro mix energético para cumplir con su trilema de la seguridad energética, marcado por su compromiso con el medio ambiente.

  8. Remote handling and accelerators

    International Nuclear Information System (INIS)

    Wilson, M.T.

    1983-01-01

    The high-current levels of contemporary and proposed accelerator facilities induce radiation levels into components, requiring consideration be given to maintenance techniques that reduce personnel exposure. Typical components involved include beamstops, targets, collimators, windows, and instrumentation that intercepts the direct beam. Also included are beam extraction, injection, splitting, and kicking regions, as well as purposeful spill areas where beam tails are trimmed and neutral particles are deposited. Scattered beam and secondary particles activate components all along a beamline such as vacuum pipes, magnets, and shielding. Maintenance techniques vary from hands-on to TV-viewed operation using state-of-the-art servomanipulators. Bottom- or side-entry casks are used with thimble-type target and diagnostic assemblies. Long-handled tools are operated from behind shadow shields. Swinging shield doors, unstacking block, and horizontally rolling shield roofs are all used to provide access. Common to all techniques is the need to make operations simple and to provide a means of seeing and reaching the area

  9. TFTR tritium handling concepts

    International Nuclear Information System (INIS)

    Garber, H.J.

    1976-01-01

    The Tokamak Fusion Test Reactor, to be located on the Princeton Forrestal Campus, is expected to operate with 1 to 2.5 MA tritium--deuterium plasmas, with the pulses involving injection of 50 to 150 Ci (5 to 16 mg) of tritium. Attainment of fusion conditions is based on generation of an approximately 1 keV tritium plasma by ohmic heating and conversion to a moderately hot tritium--deuterium ion plasma by injection of a ''preheating'' deuterium neutral beam (40 to 80 keV), followed by injection of a ''reacting'' beam of high energy neutral deuterium (120 to 150 keV). Additionally, compressions accompany the beam injections. Environmental, safety and cost considerations led to the decision to limit the amount of tritium gas on-site to that required for an experiment, maintaining all other tritium in ''solidified'' form. The form of the tritium supply is as uranium tritide, while the spent tritium and other hydrogen isotopes are getter-trapped by zirconium--aluminum alloy. The issues treated include: (1) design concepts for the tritium generator and its purification, dispensing, replenishment, containment, and containment--cleanup systems; (2) features of the spent plasma trapping system, particularly the regenerable absorption cartridges, their integration into the vacuum system, and the handling of non-getterables; (3) tritium permeation through the equipment and the anticipated releases to the environment; (4) overview of the tritium related ventilation systems; and (5) design bases for the facility's tritium clean-up systems

  10. Safe Handling of Radioisotopes

    International Nuclear Information System (INIS)

    1958-01-01

    Under its Statute the International Atomic Energy Agency is empowered to provide for the application of standards of safety for protection against radiation to its own operations and to operations making use of assistance provided by it or with which it is otherwise directly associated. To this end authorities receiving such assistance are required to observe relevant health and safety measures prescribed by the Agency. As a first step, it has been considered an urgent task to provide users of radioisotopes with a manual of practice for the safe handling of these substances. Such a manual is presented here and represents the first of a series of manuals and codes to be issued by the Agency. It has been prepared after careful consideration of existing national and international codes of radiation safety, by a group of international experts and in consultation with other international bodies. At the same time it is recommended that the manual be taken into account as a basic reference document by Member States of the Agency in the preparation of national health and safety documents covering the use of radioisotopes.

  11. Radioactive wastes handling facility

    International Nuclear Information System (INIS)

    Hirose, Emiko; Inaguma, Masahiko; Ozaki, Shigeru; Matsumoto, Kaname.

    1997-01-01

    There are disposed an area where a conveyor is disposed for separating miscellaneous radioactive solid wastes such as metals, on area for operators which is disposed in the direction vertical to the transferring direction of the conveyor, an area for receiving the radioactive wastes and placing them on the conveyor and an area for collecting the radioactive wastes transferred by the conveyor. Since an operator can conduct handling while wearing a working cloth attached to a partition wall as he wears his ordinary cloth, the operation condition can be improved and the efficiency for the separating work can be improved. When the area for settling conveyors and the area for the operators is depressurized, cruds on the surface of the wastes are not released to the outside and the working clothes can be prevented from being involved. Since the wastes are transferred by the conveyor, the operator's moving range is reduced, poisonous materials are fallen and moved through a sliding way to an area for collecting materials to be separated. Accordingly, the materials to be removed can be accumulated easily. (N.H.)

  12. Trends in Modern Exception Handling

    Directory of Open Access Journals (Sweden)

    Marcin Kuta

    2003-01-01

    Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

  13. Modelado Energético de Convertidores Primarios para el Aprovechamiento de las Energías Renovables Marinas

    Directory of Open Access Journals (Sweden)

    Amable López

    2014-04-01

    Full Text Available Resumen: El objetivo principal de este artículo es presentar los métodos más habituales de aprovechamiento de distintos tipos de energías renovables procedentes del mar y analizar los modelos energéticos de los dispositivos utilizados para su explotación. Estos modelos son necesarios para el diseño del dispositivo así como para el estudio de su comportamiento dinámico. Su conocimiento resulta imprescindible también para su simulación dinámica y para el diseño de los algoritmos de control necesarios para conseguir una optimización energética y económica. En este trabajo se presentan algunos de los diferentes tipos de energías del mar, y se j ustifica el interés en el desarrollo de dispositivos específicos para el aprovechamiento de las corrientes marinas y de las olas, junto con una pequeña clasificación en función de la profundidad del agua en la zona de instalación de estos dispositivos. Para los convertidores de energía de las olas, generalmente, de tipo resonante, se presenta una metodología de tipo general, analizando los distintos campos de fuerzas actuantes y los métodos de obtención de las respuestas temporal y frecuencial. Para los dispositivos de aprovechamiento de las corrientes, se propone una metodología simplificada de modelado dinámico que puede ser utilizada en análisis del dispositivo concreto. Para ello se tiene en cuenta los perfiles hidrodinámicos que utilizan estos dispositivos, los datos del perfil de la corriente con la profundidad y del modelo de oleaje, y la dinámica propia del conjunto multiplicadora y generador eléctrico. La metodología propuesta se aplica al estudio de un caso concreto, correspondiente a un rotor de eje horizontal de un convertidor de energía de las corrientes. Los resultados obtenidos permiten analizar los efectos del oleaje y de las condiciones de flujo de la corriente no uniforme sobre las magnitudes energéticas más importantes. Abstract: The main objective of

  14. Remote technologies for handling spent fuel

    International Nuclear Information System (INIS)

    Ramakumar, M.S.

    1999-01-01

    The nuclear programme in India involves building and operating power and research reactors, production and use of isotopes, fabrication of reactor fuel, reprocessing of irradiated fuel, recovery of plutonium and uranium-233, fabrication of fuel containing plutonium-239, uranium-233, post-irradiation examination of fuel and hardware and handling solid and liquid radioactive wastes. Fuel that could be termed 'spent' in thermal reactors is a source for second generation fuel (plutonium and uranium-233). Therefore, it is only logical to extend remote techniques beyond handling fuel from thermal reactors to fuel from fast reactors, post-irradiation examination etc. Fabrication of fuel containing plutonium and uranium-233 poses challenges in view of restriction on human exposure to radiation. Hence, automation will serve as a step towards remotisation. Automated systems, both rigid and flexible (using robots) need to be developed and implemented. Accounting of fissile material handled by robots in local area networks with appropriate access codes will be possible. While dealing with all these activities, it is essential to pay attention to maintenance and repair of the facilities. Remote techniques are essential here. There are a number of commonalities in these requirements and so development of modularized subsystems, and integration of different configurations should receive attention. On a long-term basis, activities like decontamination, decommissioning of facilities and handling of waste generated have to be addressed. While robotized remote systems have to be designed for existing facilities, future designs of facilities should take into account total operation with robotic remote systems. (author)

  15. Safety measuring for sodium handling

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Ji Young; Jeong, K C; Kim, T J; Kim, B H; Choi, J H

    2001-09-01

    This is the report for the safety measures of sodium handling. These contents are prerequisites for the development of sodium technology and thus the workers participate in sodium handling and experiments have to know them perfectly. As an appendix, the relating parts of the laws are presented.

  16. Waste Handling Building Conceptual Study

    International Nuclear Information System (INIS)

    G.W. Rowe

    2000-01-01

    The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable, and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system

  17. Por uma nova ordem energética global? potencialidades e perspectivas da questão energética entre os países BRICS

    Directory of Open Access Journals (Sweden)

    José María Gómez

    2012-12-01

    Full Text Available O presente artigo propõe analisar a questão energética entre os BRICS e o potencial de rearticulação da ordem energética global que dela emerge. Para tal, realiza três movimentos. Em primeiro lugar, investiga o crescente impacto agregado dos países BRICS no cenário energético global, com vistas a analisar seu avanço em uma temática até então reduto dos países desenvolvidos. Em segundo lugar, aborda a matriz energética de cada um dos cinco países do ponto de vista de suas economias políticas e da questão da sustentabilidade. Em terceiro lugar, e com base na seção anterior, propõe mapear as áreas de conflito e de possível aproximação entre os BRICS, na tentativa de localizar as possibilidades e limites da sua cooperação energética. Com base nessa investigação, conclui que, diante das potencialidades para a cooperação entre os países, a organização de suas ofertas e demandas energéticas nacionais pode permitir ao agrupamento articular-se como um novo polo no cenário energético global.

  18. Aplicación electrónica para el ahorro de energía eléctrica utilizando una energía alternativa

    Directory of Open Access Journals (Sweden)

    Juan Carlos Cruz-Ardila

    2013-01-01

    Full Text Available El artículo presenta un trabajo orientado a disminuir el consumo de energía eléctrica entregada por la red eléctrica convencional, a través del aprovechamiento de la energía solar fotovoltaica. Se propone el diseño de un sistema de transferencia electrónica que facilita el uso de la energía eléctrica DC proveniente del panel solar, suprimiendo de esta manera, la utilización del inversor de voltaje, comúnmente usado en este tipo de aplicaciones y que eleva el costo de utilización de la energía solar. Se da a conocer inicialmente una revisión del estado del arte, que permite contextualizar el problema resuelto a partir de una energía renovable como la fotovoltaica, destacándose que actualmente España es el país con mayor desarrollo en este tema. Luego, se muestra el desarrollo secuencial del sistema de alimentación y la transferencia electrónica, haciendo una descripción de las variables identificadas y explicación, con el uso de diagramas de flujo, del sistema embebido implementado. También se da una descripción de los dispositivos usados tal como el sensor de corriente, la regulación y la rectificación. Se muestra el esquemático de la transferencia implementada. Finalmente, se revelan los resultados y las pruebas operacionales realizadas al sistema para demostrar la funcionalidad de la aplicación electrónica en el ahorro de la energía eléctrica utilizando una energía alternativa.

  19. Fission reactor recycling pump handling device

    International Nuclear Information System (INIS)

    Togasawa, Hiroshi; Komita, Hideo; Susuki, Shoji; Endo, Takio; Yamamoto, Tetsuzo; Takahashi, Hideaki; Saito, Noboru.

    1991-01-01

    This invention provides a device for handling a recycling pump in a nuclear reactor upon periodical inspections in a BWR type power plant. That is, in a handling device comprising a support for supporting components of a recycling pump, and a lifter for vertically moving the support below a motor case disposed passing through a reactor pressure vessel, a weight is disposed below the support. Then, the center of gravity of the components, the support and the entire weight is substantially aligned with the position for the support. With such a constitution, the components can be moved vertically to the motor case extremely safely, to remarkably suppress vibrations. Further, the operation safety can remarkably be improved by preventing turning down upon occurrence of earthquakes. Further, since vibration-proof jigs as in a prior art can be saved, operation efficiency can be improved. (I.S.)

  20. Fission reactor recycling pump handling device

    Energy Technology Data Exchange (ETDEWEB)

    Togasawa, Hiroshi; Komita, Hideo; Susuki, Shoji; Endo, Takio; Yamamoto, Tetsuzo; Takahashi, Hideaki; Saito, Noboru

    1991-06-24

    This invention provides a device for handling a recycling pump in a nuclear reactor upon periodical inspections in a BWR type power plant. That is, in a handling device comprising a support for supporting components of a recycling pump, and a lifter for vertically moving the support below a motor case disposed passing through a reactor pressure vessel, a weight is disposed below the support. Then, the center of gravity of the components, the support and the entire weight is substantially aligned with the position for the support. With such a constitution, the components can be moved vertically to the motor case extremely safely, to remarkably suppress vibrations. Further, the operation safety can remarkably be improved by preventing turning down upon occurrence of earthquakes. Further, since vibration-proof jigs as in a prior art can be saved, operation efficiency can be improved. (I.S.).

  1. Producción, Reservas y Sostenibilidad de la Energía en Venezuela

    Directory of Open Access Journals (Sweden)

    Juan Carlos Rojas-Zerpa

    2015-06-01

    Full Text Available El propósito del presente trabajo está relacionado con la evaluación de los recursos energéticos de Venezuela y su posicionamiento estratégico mundial, referido principalmente a la producción y consumo de energía primaria y reservas. Así mismo se han evaluado los recursos energéticos renovables con la finalidad de identificar oportunidades para el desarrollo de la energía sostenible. Los resultados indican que Venezuela posee recursos fósiles para más de 130 años de explotación, lo cual lo convierte en una potencia energética relevante en el contexto mundial. La potencialidad aprovechable de las energías renovables duplicó la producción de recursos fósiles en 2011. En la actualidad, el aprovechamiento de estas fuentes es inferior al 2 % del total disponible, lo que deja abierto un amplio rango de posibilidades para la diversificación de la matriz energética nacional mediante tecnologías limpias o sostenibles

  2. Laser power supply

    International Nuclear Information System (INIS)

    Whitehouse, D.R.; Hartshorn, D.W.

    1975-01-01

    A method of energizing a laser source stimulating flash lamp directly from an ac power line is presented. Uncontrolled diodes couple the anode and cathode of the flash lamp directly to the ac line. The lamp is triggered by a separate triggering circuit which produces its trigger pulse at a predetermined phase of the ac power source. The use of high current carrying controlled rectifiers and large energy storage devices is thereby eliminated. (U.S.)

  3. Ontario Hydro Pickering Generating Station fuel handling system performance

    International Nuclear Information System (INIS)

    Underhill, H.J.

    1986-01-01

    The report briefly describes the Pickering Nuclear Generating Station (PNGS) on-power fuel handling system and refuelling cycle. Lifetime performance parameters of the fuelling system are presented, including station incapability charged to the fuel handling system, cost of operating and maintenance, dose expenditure, events causing system unavailability, maintenance and refuelling strategy. It is concluded that the 'CANDU' on-power fuelling system, by consistently contributing less than 1% to the PNGS incapability, has been credited with a 6 to 20% increase in reactor capacity factor, compared to off-power fuelling schemes. (author)

  4. Power

    DEFF Research Database (Denmark)

    Elmholdt, Claus Westergård; Fogsgaard, Morten

    2016-01-01

    and creativity suggests that when managers give people the opportunity to gain power and explicate that there is reason to be more creative, people will show a boost in creative behaviour. Moreover, this process works best in unstable power hierarchies, which implies that power is treated as a negotiable....... It is thus a central point that power is not necessarily something that breaks down and represses. On the contrary, an explicit focus on the dynamics of power in relation to creativity can be productive for the organisation. Our main focus is to elaborate the implications of this for practice and theory...

  5. Review on Fuel Loading Process and Performance for Advanced Fuel Handling Equipment

    International Nuclear Information System (INIS)

    Chang, Sang-Gyoon; Lee, Dae-Hee; Kim, Young-Baik; Lee, Deuck-Soo

    2007-01-01

    The fuel loading process and the performance of the advanced fuel handling equipment for OPR 1000 (Optimized Power Plant) are analyzed and evaluated. The fuel handling equipment, which acts critical processes in the refueling outage, has been improved to reduce fuel handling time. The analysis of the fuel loading process can be a useful tool to improve the performance of the fuel handling equipment effectively. Some recommendations for further improvement are provided based on this study

  6. Sophisticated fuel handling system evolved

    International Nuclear Information System (INIS)

    Ross, D.A.

    1988-01-01

    The control systems at Sellafield fuel handling plant are described. The requirements called for built-in diagnostic features as well as the ability to handle a large sequencing application. Speed was also important; responses better than 50ms were required. The control systems are used to automate operations within each of the three main process caves - two Magnox fuel decanners and an advanced gas-cooled reactor fuel dismantler. The fuel route within the fuel handling plant is illustrated and described. ASPIC (Automated Sequence Package for Industrial Control) which was developed as a controller for the plant processes is described. (U.K.)

  7. Production management of window handles

    Directory of Open Access Journals (Sweden)

    Manuela Ingaldi

    2014-12-01

    Full Text Available In the chapter a company involved in the production of aluminum window and door handles was presented. The main customers of the company are primarily companies which produce PCV joinery and wholesalers supplying these companies. One chosen product from the research company - a single-arm pin-lift window handle - was described and its production process depicted technologically. The chapter also includes SWOT analysis conducted in the research company and the value stream of the single-arm pin-lift window handle.

  8. Remote handling technology for nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Sakai, Akira; Maekawa, Hiromichi; Ohmura, Yutaka

    1997-01-01

    Design and R and D on nuclear fuel cycle facilities has intended development of remote handling and maintenance technology since 1977. IHI has completed the design and construction of several facilities with remote handling systems for Power Reactor and Nuclear Fuel Development Corporation (PNC), Japan Atomic Energy Research Institute (JAERI), and Japan Nuclear Fuel Ltd. (JNFL). Based on the above experiences, IHI is now undertaking integration of specific technology and remote handling technology for application to new fields such as fusion reactor facilities, decommissioning of nuclear reactors, accelerator testing facilities, and robot simulator-aided remote operation systems in the future. (author)

  9. WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J. D. Bigbee

    2000-06-21

    The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status.

  10. WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    J. D. Bigbee

    2000-01-01

    The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status

  11. The prevention and handling of the missing data

    OpenAIRE

    Kang, Hyun

    2013-01-01

    Even in a well-designed and controlled study, missing data occurs in almost all research. Missing data can reduce the statistical power of a study and can produce biased estimates, leading to invalid conclusions. This manuscript reviews the problems and types of missing data, along with the techniques for handling missing data. The mechanisms by which missing data occurs are illustrated, and the methods for handling the missing data are discussed. The paper concludes with recommendations for ...

  12. La inversión en energías renovables en Argentina

    OpenAIRE

    Recalde, Marina

    2017-01-01

    En este artículo se analiza en qué medida los factores del entorno de la política energética de un país en desarrollo, tal como Argentina, determinan la evolución de la inversión en energías renovables. La baja calidad institucional del país ayuda a crear condiciones no propicias que contrarrestan el efecto de la política energética, reduciendo los incentivos para invertir en tecnologías renovables. Es necesario entonces mejorar las condiciones institucionales de los países en desarrollo para...

  13. Estudio del balance energético en velocistas de alto rendimiento

    OpenAIRE

    Lorente Gutiérrez, Jesús

    2015-01-01

    El objetivo de este estudio fue evaluar el balance energético en tres atletas de alto rendimiento durante 28 días, que coincidieron con el periodo competitivo de pista cubierta. La ingesta energética fue estudiada a partir de registros alimentarios durante los 28 días. Del mismo modo, el gasto energético fue estimado por tres métodos, mediante registros de actividad durante 28 días, mediante el estudio del ritmo metabólico basal estudiado por calorimetría indirecta, aplicándole el fa...

  14. Perspectivas de la situación energética mundial. Las oportunidades para Colombia

    OpenAIRE

    Arturo Infante Villarreal

    2007-01-01

    Casi la cuarta parte de la energía que consume Estados Unidos proviene de petróleo importado y sólo el 6% se origina en fuentes renovables, aunque el país produce 20% de la polución ambiental mundial y tiene sólo 4% de la población total. Los biocombustibles son una fuente potencial de energía renovable para Estados Unidos, y el resto del mundo, porque tienen un balance energético y ambiental bastante favorable. Si las condiciones de precios son adecuadas para los productores de las materias ...

  15. Eficiencia energética en el sector residencial de la ciudad de Cuenca, Ecuador

    OpenAIRE

    Baquero Larriva, María Teresa; Quesada Molina, Juan Felipe

    2016-01-01

    El objetivo de la presente investigación fue determinar en qué medida se puede reducir el consumo de energía en el sector residencial de la ciudad de Cuenca, manteniendo óptimas condiciones de confort. El estudio se centra en la definición de indicadores de eficiencia energética para la vivienda, mediante la determinación de la demanda de energía y la definición de los factores de mayor consumo, usando un enfoque cualitativo y cuantitativo. Se realizaron encuestas en 280 viviendas del sector ...

  16. Asturias en el sistema energético: del nacionalismo a la globalización

    OpenAIRE

    Maurín Álvarez, Manuel

    2011-01-01

    Con una demanda energética regional estancada y al mismo tiempo en que se clausuran las últimas explotaciones mineras, principales proveedoras de materias primas energéticas autóctonas, Asturias se aventura a la construcción de infraestructuras de generación y transporte que permitirían duplicar en los próximos años una producción eléctrica que ya es excedentaria. La región se convierte así en una especie de «vientre de alquiler» energético, especializada en generar, con materias primas impor...

  17. Balance de energía en cultivos hortícolas a campo en Rosario (Santa Fe, Argentina

    Directory of Open Access Journals (Sweden)

    J. Denoia

    2010-01-01

    Full Text Available Se analizó la gestión de la energía en cultivos de papa, tomate y lechuga en un área próxima a la ciudad de Rosario (Argentina. Se consideraron todos los ingresos de materia al sistema y su producción transformándolos en energía al multiplicar las cantidades de insumos por sus contenidos energéticos. Se analizó tanto la energía directa como la indirecta. Se estudió la gestión energética dentro de los límites físicos del sistema. Los indicadores empleados fueron: eficiencia energética (EfE y productividad energética (PE. Los balances energéticos de papa y tomate fueron negativos, mientras que en lechuga, la energía producida fue menor que la ingresada. La mayor eficiencia energética se registró en tomate (3,54, seguida por papa (2,69; la menor fue en lechuga (0,25. La energía ingresada en tomate resultó la más eficiente (88,6 kgMS/100 Mj, seguida por la de papa (16 kgMS/100 Mj y la de lechuga (10,8 kgMS/100 Mj.

  18. Safe handling of radiation sources

    International Nuclear Information System (INIS)

    Abd Nasir Ibrahim; Azali Muhammad; Ab Razak Hamzah; Abd Aziz Mohamed; Mohammad Pauzi Ismail

    2004-01-01

    This chapter discussed the subjects related to the safe handling of radiation sources: type of radiation sources, method of use: transport within premises, transport outside premises; Disposal of Gamma Sources

  19. How Retailers Handle Complaint Management

    DEFF Research Database (Denmark)

    Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy

    2009-01-01

    This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained as to the......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived...

  20. Ergonomic material-handling device

    Science.gov (United States)

    Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

    2004-08-24

    A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

  1. The technique on handling radiation

    International Nuclear Information System (INIS)

    1997-11-01

    This book describes measurement of radiation and handling radiation. The first part deals with measurement of radiation. The contents of this part are characteristic on measurement technique of radiation, radiation detector, measurement of energy spectrum, measurement of radioactivity, measurement for a level of radiation and county's statistics on radiation. The second parts explains handling radiation with treating of sealed radioisotope, treating unsealed source and radiation shield.

  2. Civilsamfundets ABC: H for Handling

    DEFF Research Database (Denmark)

    Lund, Anker Brink; Meyer, Gitte

    2015-01-01

    Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling.......Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling....

  3. Transmission lines with lightning arresters cables energized by optical fibers; Linhas de transmissao com cabos para-raios energizados com fibra optica

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Fumitaka; Cicarelli, Liliane Dias [Alcoa Aluminio S.A. (Brazil); D`Ajuz, Ary [ELETRONORTE, Belem, PA (Brazil); Martinez, Manuel L.B. [Escola Federal de Engenharia de Itajuba, MG (Brazil); Masuda, Mario [Tecname Engenharia (Brazil)

    1995-12-31

    Recently, the implementation of optical systems has been possible through the utilization of the existent transmission lines structure by the sharing between electric power and telecommunications enterprises, using Op-GW cables instead of conventional lightning-arresters cables. In order to make such optical sharing feasible, the enterprise ALCOA Aluminio S.A is developing the energized lightning-arrester system with optical fiber in it. This work presents such system and show its great advantages specially when implemented in low population density regions in order to supply electric power demand at lower costs 6 refs., 5 figs.

  4. America Saves! Energizing Main Street's Small Businesses

    Energy Technology Data Exchange (ETDEWEB)

    Lindberg, James [National Trust for Historic Preservation, Washington, DC (United States)

    2016-09-30

    The America Saves! Energizing Main Street Small Businesses project engaged the 1,200-member National Main Street Center (NMSC) network of downtown organizations and other local, regional, and national partners to test a methodology for sharing customized energy efficiency information with owners of commercial buildings smaller than 50,000 square feet. Led by the National Trust for Historic Preservation’s Preservation Green Lab, the project marshalled local staff and volunteers to gather voluntarily-disclosed energy use information from participating businesses. This information was analyzed using a remote auditing tool (validated by the National Renewable Energy Lab) to assess energy savings opportunities and design retrofit strategies targeting seven building types (food service and sales, attached mixed-use, strip mall, retail, office, lodging, and schools). The original project design contemplated extensive leveraging of the Green Button protocol for sharing annualized utility data at a district scale. Due the lack of adoption of Green Button, the project partners developed customized approaches to data collection in each of twelve pilot communities. The project team encountered considerable challenges in gathering standardized annual utility data from local partners. After overcoming these issues, the data was uploaded to a data storehouse. Over 450 properties were benchmarked and the remote auditing tool was tested using full building profiles and utility records for more than 100 commercial properties in three of the pilot communities. The audit tool demonstrated potential for quickly capturing, analyzing, and communicating energy efficiency opportunities in small commercial buildings. However, the project team found that the unique physical characteristics and use patterns (partial vacancy, periodic intensive uses) of small commercial buildings required more trouble-shooting and data correction than was anticipated. In addition, the project revealed that

  5. Remote filter handling machine for Sizewell B

    International Nuclear Information System (INIS)

    Barker, D.

    1993-01-01

    Two Filter Handling machines (FHM) have been supplied to Nuclear Electric plc for use at Sizewell B Power Station. These machines have been designed and built following ALARP principles with the functional objective being to remove radioactive filter cartridges from a filter housing and replace them with clean filter cartridges. Operation of the machine is achieved by the prompt of each distinct task via an industrial computer or the prompt of a full cycle using the automatic mode. The design of the machine features many aspects demonstrating ALARP while keeping the machine simple, robust and easy to maintain. (author)

  6. Kinetic Simulations of Plasma Energization and Particle Acceleration in Interacting Magnetic Flux Ropes

    Science.gov (United States)

    Du, S.; Guo, F.; Zank, G. P.; Li, X.; Stanier, A.

    2017-12-01

    The interaction between magnetic flux ropes has been suggested as a process that leads to efficient plasma energization and particle acceleration (e.g., Drake et al. 2013; Zank et al. 2014). However, the underlying plasma dynamics and acceleration mechanisms are subject to examination of numerical simulations. As a first step of this effort, we carry out 2D fully kinetic simulations using the VPIC code to study the plasma energization and particle acceleration during coalescence of two magnetic flux ropes. Our analysis shows that the reconnection electric field and compression effect are important in plasma energization. The results may help understand the energization process associated with magnetic flux ropes frequently observed in the solar wind near the heliospheric current sheet.

  7. Situación energética de los hidrocarburos en el Perú

    OpenAIRE

    Rojas Lazo, Oswaldo; Rojas Rojas, Jorge; Salas Bacalla, Julio

    2014-01-01

    La tasa de crecimiento anual del consumo de energía en el mundo se incrementa a razón de 2 a 3%, teniendo a los hidrocarburos y el carbón como sus principales componentes. En el Perú las reservas probadas de energía son: gas (Camisea) con el 43% de la energía comercial, la hidroenergía 23,1%, los líquidos de gas natural con el 14,7% y otros con el 19.2%. La balanza comercial energética en el Perú es negativa, la producción de petróleo en los últimos años está descendiendo mientras que la prod...

  8. Synergy of Stochastic and Systematic Energization of Plasmas during Turbulent Reconnection

    Science.gov (United States)

    Pisokas, Theophilos; Vlahos, Loukas; Isliker, Heinz

    2018-01-01

    The important characteristic of turbulent reconnection is that it combines large-scale magnetic disturbances (δ B/B∼ 1) with randomly distributed unstable current sheets (UCSs). Many well-known nonlinear MHD structures (strong turbulence, current sheet(s), shock(s)) lead asymptotically to the state of turbulent reconnection. We analyze in this article, for the first time, the energization of electrons and ions in a large-scale environment that combines large-amplitude disturbances propagating with sub-Alfvénic speed with UCSs. The magnetic disturbances interact stochastically (second-order Fermi) with the charged particles and play a crucial role in the heating of the particles, while the UCSs interact systematically (first-order Fermi) and play a crucial role in the formation of the high-energy tail. The synergy of stochastic and systematic acceleration provided by the mixture of magnetic disturbances and UCSs influences the energetics of the thermal and nonthermal particles, the power-law index, and the length of time the particles remain inside the energy release volume. We show that this synergy can explain the observed very fast and impulsive particle acceleration and the slightly delayed formation of a superhot particle population.

  9. Re-energizing enquiry among our young professionals

    Science.gov (United States)

    Roychoudhuri, ChandraSekhar

    2017-08-01

    Children are born with enquiring mindset. They keep on asking questions to explore, understand and take part in their environment. However, modern educational systems discourage persistent enquiring questions. Most students, graduating from college, can use their enquiring faculties only to solve problems at hand. They accept the theories taught as the final models for the laws of nature. They safely assume that no further deeper enquiry is needed. This is a disturbing collective tendency counter to our continuously evolving nature. We should also consciously train our minds to evolve continuously by persistently asking enquiring questions. Therefore, we suggest that we take pro-active steps to re-energize the enquiring mindset among our young professionals by organizing enquiry forums for students from all international Student Chapters during most of our optical society meetings. Panels of volunteer senior scientists should encourage deep enquiring questions from the students. In this paper, as examples, I will present a set of enquiring questions in the field of optics that we have been underscoring to students. This is one of the three papers by this author for this conference, ETOP 100-43. Since scientific content-wise they complement each other, the readers should consult the others. They are: ETP100-36, "Consequences of repeated discovery and benign neglect of non-interaction of waves" and ETP100-83, and "Demonstration and implications when 50% beam combiners can behave as 0 or 100% reflector/transmitter inside some interferometers."

  10. Energization of helium ions by proton-induced hydromagnetic waves

    International Nuclear Information System (INIS)

    Gendrin, R.; Roux, A.

    1980-01-01

    We consider the diffusion of He + ions under the influence of ion cyclotron waves generated in a plasma consisting of three different ion populations: a thermal isotropic population containing both H + and He + ions and an energetic H + population, with a positive anisotropy A=T/sub perpendicular//T/sub parallel/-1. We compute, in the velocity space upsilon/sub parallel/, upsilon/sub perpendicular/, the diffusion curves that He + ions will follow in the presence of ion cyclotron waves propagating in such a medium. We show that for small concentrations of the He + ions, of the order of 1 to approx.10%, these ions can be energized by such a process up to and above suprathermal energies (E> or approx. =20 eV). On some occasions the He + ions may even reach energies of the order of the Alfven energy of the cold plasma population: E/sub a/approx. =m/sub p/V/sub a/ 2 approx. =5 keV. Characteristic diffusion times, in pitch angle and energy, for both ion species, are evaluated. They are of the order of 2 to 20 min. These theoretical results are discussed in the frame of recent observations by Geos experimenters showing the close association that exists between the occurrence of ion cyclotron ULF waves and the presence of thermal or supra-thermal He + ions in the equatorial region of the magnetosphere

  11. Calcium transport in vesicles energized by cytochrome oxidase

    Energy Technology Data Exchange (ETDEWEB)

    Rosier, Randy N. [Univ. of Rochester, NY (United States)

    1979-01-01

    Experiments on the reconstitution of cytochrome oxidase into phospholipid vesicles were carried out using techniques of selectivity energizing the suspensions with ascorbate and cytochrome c or ascorbate, PMS, and internally trapped cytochrome c. It was found that the K+ selective ionophore valinomycin stimulated the rate of respiration of cytochrome oxidase vesicles regardless of the direction of the K+ flux across the vesicle membranes. The stimulation occurred in the presence of protonophoric uncouplers and in the complete absence of potassium or in detergent-lysed suspensions. Gramicidin had similar effects and it was determined that the ionophores acted by specific interaction with cytochrome oxidase rather than by the previously assumed collapse of membrane potentials. When hydrophobic proteins and appropriate coupling factors were incorporated into the cytochrome oxidase, vesicles phosphorylation of ADP could be coupled to the oxidation reaction of cytochrome oxidase. Relatively low P:O, representing poor coupling of the system, were problematical and precluded measurements of protonmotive force. However the system was used to study ion translocation.

  12. Pathways for Energization of Ca in Mercury's Exosphere

    Science.gov (United States)

    Killen, Rosemary M.

    2015-01-01

    We investigate the possible pathways to produce the extreme energy observed in the calcium exosphere of Mercury. Any mechanism must explain the facts that Ca in Mercury's exosphere is extremely hot, that it is seen almost exclusively on the dawnside of the planet, and that its content varies seasonally, not sporadically. Simple diatomic molecules or their clusters are considered, focusing on calcium oxides while acknowledging that Ca sulfides may also be the precursor molecules. We first discuss impact vaporization to justify the assumption that CaO and Ca-oxide clusters are expected from impacts on Mercury. Then we discuss processes by which the atomic Ca is energized to a 70,000 K gas. The processes considered are (1) electron-impact dissociation of CaO molecules, (2) spontaneous dissociation of Ca-bearing molecules following impact vaporization, (3) shock-induced dissociative ionization, (4) photodissociation and (5) sputtering. We conclude that electron-impact dissociation cannot produce the required abundance of Ca, and sputtering cannot reproduce the observed spatial and temporal variation that is measured. Spontaneous dissociation is unlikely to result in the high energy that is seen. Of the two remaining processes, shock induced dissociative ionization produces the required energy and comes close to producing the required abundance, but rates are highly dependent on the incoming velocity distribution of the impactors. Photodissociation probably can produce the required abundance of Ca, but simulations show that photodissociation cannot reproduce the observed spatial distribution.

  13. Cálculo del balance de energía para higuerilla (Ricinus communis L. desde las etapas de producción en campo hasta el valor energético de cada componente de la planta

    Directory of Open Access Journals (Sweden)

    Hipólito Ortíz-Laurel

    2017-01-01

    Full Text Available Introducción : Pruebas de balance de energía permiten redirigir los insumos desde las etapas de producción de un cultivo, e igualmente, precesar la cantidad de energía utilizada para cada proceso y así, verificar la eficiencia al transformar la energía contenida en el cultivo cuando debe cumplir con una función deseada. Método : la planta de higuerilla (Ricinus communis L. con propósitos de cultivo energético fue sembrada en campo y sometida a procesos de mantenimiento de l cultivo y en la cosecha, la planta completa fue colectada para análisis energético, donde cada una de sus partes inclu i das las semillas fueron evaluadas en función de su contenido de energía. Así, para determinar el balance de energía; los valores de la energía biológica de la planta fueron comparados con la energía aplicada en cada uno de los procesos técnicos y físicos para la producción del cult i vo y en su procesamiento . Resultados : La energía aplicada para producir el cultivo r esulta un 28% superior a la energía a obtener de la planta. Asimismo, la biomasa de la planta completa de higuerilla, sin contar las semillas genera el doble de energía comparado con el aceite de las semillas, por lo que, conviene utilizar toda la planta e n términos de energía . Conclusión : Es recomendable utilizar el aceite de las seillas como biomaterial, ya que el b a lance es positivo en un 15%.

  14. 77 FR 58416 - Comparative Environmental Evaluation of Alternatives for Handling Low-Level Radioactive Waste...

    Science.gov (United States)

    2012-09-20

    ... for Handling Low-Level Radioactive Waste Spent Ion Exchange Resins From Commercial Nuclear Power... Radioactive Waste Spent Ion Exchange Resins from Commercial Nuclear Power Reactors. DATES: Please submit... Evaluation of Alternatives for Handling Low-Level Radioactive Waste Spent Ion Exchange Resins from Commercial...

  15. Asthma, guides for diagnostic and handling

    International Nuclear Information System (INIS)

    Salgado, Carlos E; Caballero A, Andres S; Garcia G, Elizabeth

    1999-01-01

    The paper defines the asthma, includes topics as diagnostic, handling of the asthma, special situations as asthma and pregnancy, handling of the asthmatic patient's perioperatory and occupational asthma

  16. SRV-automatic handling device

    International Nuclear Information System (INIS)

    Yamada, Koji

    1987-01-01

    Automatic handling device for the steam relief valves (SRV's) is developed in order to achieve a decrease in exposure of workers, increase in availability factor, improvement in reliability, improvement in safety of operation, and labor saving. A survey is made during a periodical inspection to examine the actual SVR handling operation. An SRV automatic handling device consists of four components: conveyor, armed conveyor, lifting machine, and control/monitoring system. The conveyor is so designed that the existing I-rail installed in the containment vessel can be used without any modification. This is employed for conveying an SRV along the rail. The armed conveyor, designed for a box rail, is used for an SRV installed away from the rail. By using the lifting machine, an SRV installed away from the I-rail is brought to a spot just below the rail so that the SRV can be transferred by the conveyor. The control/monitoring system consists of a control computer, operation panel, TV monitor and annunciator. The SRV handling device is operated by remote control from a control room. A trial equipment is constructed and performance/function testing is carried out using actual SRV's. As a result, is it shown that the SRV handling device requires only two operators to serve satisfactorily. The required time for removal and replacement of one SRV is about 10 minutes. (Nogami, K.)

  17. 30 CFR 57.12017 - Work on power circuits.

    Science.gov (United States)

    2010-07-01

    ... shall prevent the power circuits from being energized without the knowledge of the individuals working... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Work on power circuits. 57.12017 Section 57... Surface and Underground § 57.12017 Work on power circuits. Power circuits shall be deenergized before work...

  18. Handling of waste in ports

    International Nuclear Information System (INIS)

    Olson, P.H.

    1994-01-01

    The regulations governing the handling of port-generated waste are often national and/or local legislation, whereas the handling of ship-generated waste is governed by the MARPOL Convention in most parts of the world. The handling of waste consists of two main phases -collection and treatment. Waste has to be collected in every port and on board every ship, whereas generally only some wastes are treated and to a certain degree in ports and on board ships. This paper considers the different kinds of waste generated in both ports and on board ships, where and how it is generated, how it could be collected and treated. The two sources are treated together to show how some ship-generated waste may be treated in port installations primarily constructed for the treatment of the port-generated waste, making integrated use of the available treatment facilities. (author)

  19. Fleet Sizing of Automated Material Handling Using Simulation Approach

    Science.gov (United States)

    Wibisono, Radinal; Ai, The Jin; Ratna Yuniartha, Deny

    2018-03-01

    Automated material handling tends to be chosen rather than using human power in material handling activity for production floor in manufacturing company. One critical issue in implementing automated material handling is designing phase to ensure that material handling activity more efficient in term of cost spending. Fleet sizing become one of the topic in designing phase. In this research, simulation approach is being used to solve fleet sizing problem in flow shop production to ensure optimum situation. Optimum situation in this research means minimum flow time and maximum capacity in production floor. Simulation approach is being used because flow shop can be modelled into queuing network and inter-arrival time is not following exponential distribution. Therefore, contribution of this research is solving fleet sizing problem with multi objectives in flow shop production using simulation approach with ARENA Software

  20. Power supply trip control for nuclear reactor

    International Nuclear Information System (INIS)

    Hager, R.E.; Gutman, Jerzy.

    1987-01-01

    A control system for a trip coil in a switchgear mechanism controls the supply of electrical power to a process control device and ensures de-energization of the trip coil shortly after the trip coil is energized. The trip coil is energized not by an independent dc source as in prior art, but from rectified power from a step down transformer supplied from the switchgear output side. The transformer feeds a rectifier which is connected to the trip coil via a trip activation device. The output of the rectifier can be monitored using an optical converter to determine the ability of the control system to activate the trip coil and the condition of the power supplied to the process control device. The control device may be a rod positioner in a pressurised water nuclear reactor. (author)

  1. Apparatus for deploying and energizing submersible electric motor downhole

    International Nuclear Information System (INIS)

    Conner, S.E.; Dwiggins, J.L.; Brookbank, E.B.

    1991-01-01

    This patent describes an apparatus for deploying and energizing a submergible electric motor downhole. It comprises a cable socket assembly and a cable connecting-and-sealing chamber assembly adapted to be arranged seriatim in the path of cable means and the motor, the assemblies having first and second housings, respectively, means for connecting a lower end of the first housing to an upper end of the second housing, a lower end of the second housing being adapted for connection to the motor, the cable socket assembly having an attachment portion including means for attaching a weight-bearing cable of the cable means to the first housing via a breakaway connection, the first housing having a passage therein adapted to pass an electrical cable of the cable means to the second housing, the second housing being divided by a body therein into first and second chambers sealed from each other, the first chamber being adapted to communicate sealingly with the passage and the second chamber being adapted to communicate sealingly with the interior of the motor, a first set of electrical conductors in the first chamber and a second set of electrical conductors in the second chamber, the body having feed-through means for electrically interconnecting conductors of the first set with corresponding conductors of the second set, the conductors of the first set having electrical connector parts adapted to connect releasably with corresponding electrical connector parts of the electrical cable, and the conductors of the second set having electrical connector parts adapted to connect with corresponding electrical connector parts of the motor, each of the chambers being adapted to be filled with fluid to exclude well fluid therefrom

  2. La Seguridad Energética y la Estrategia Global de Seguridad de la Unión Europea

    Directory of Open Access Journals (Sweden)

    Ruben Herrero

    2016-10-01

    Full Text Available El presente artículo plantea una definición ampliada del concepto de seguridad energética, yendo más allá del concepto clásico establecido por la Agencia Internacional de la Energía, incorporando cuestiones relativas a la eficiencia energética, la aceptabilidad del modelo energético y los retos que impone el cambio climático, pero sin perder de perspectiva las exigencias y las dinámicas competitivas económicas globales. Sobre la base de este concepto ampliado, se examina la evolución de la seguridad energética en el marco de la Unión Europea, con una atención particular a cómo se concibe la seguridad energética en la Estrategia Global de Seguridad de 2016.

  3. Costo energético de muros y techos utilizados en la zona sur de Tamaulipas

    Directory of Open Access Journals (Sweden)

    Mireya Alicia Rosas Lusett

    2015-01-01

    Full Text Available El presente trabajo muestra los procedimientos y resultados obtenidos del análisis de la energía trasmitida en techos y muros de las viviendas seleccionadas de la zona sur del estado de Tamaulipas, una de las cinco áreas establecidas dentro del proyecto “Desarrollo y validación de una metodología para estimar los impactos en el ahorro de energía por el uso de sistemas pasivo-constructivos en la edificación para diferentes climas de México”. Este proyecto fue financiado por la Convocatoria S0019-2009-01 del Fondo Sectorial de Sustentabilidad Energética SENER-CONACYT con registro Nº 118665, cuyo objetivo en su tercera etapa de ejecución, consistió en hacer uso de la herramienta Ener-Habitat, la cual fue desarrollada durante la segunda fase del proyecto. Con dicho programa de cálculo se determinaron los gastos de energía, comparativa de cuatro sistemas constructivos para muros y tres sistemas constructivos para losas utilizadas en la zona sur de Tamaulipas. Con la información obtenida y mediante el uso de la metodología desarrollada para estimar los impactos en el ahorro de energía, se evaluó el costo energético de cada uno de los sistemas constructivos. Con los resultados obtenidos se pudo determinar cuál era el muro y techo de menor gasto de energía para la zona de estudio. Adicionalmente se realizó un estudio de la influencia de la absortancia solar de la superficie exterior de los muros, cuyos resultados darán la pauta para diseñar una vivienda que pretende sea adecuada y cómoda al clima cálido húmedo que prevalece en el área.

  4. Software for handling MFME1

    International Nuclear Information System (INIS)

    Van der Merwe, W.G.

    1984-01-01

    The report deals with SEMFIP, a computer code for determining magnetic field measurements. The program is written in FORTRAN and ASSEMBLER. The preparations for establishing SEMFIP, the actual measurements, data handling and the problems that were experienced are discussed. Details on the computer code are supplied in an appendix

  5. Welding method by remote handling

    International Nuclear Information System (INIS)

    Hashinokuchi, Minoru.

    1994-01-01

    Water is charged into a pit (or a water reservoir) and an article to be welded is placed on a support in the pit by remote handling. A steel plate is disposed so as to cover the article to be welded by remote handling. The welding device is positioned to the portion to be welded and fixed in a state where the article to be welded is shielded from radiation by water and the steel plate. Water in the pit is drained till the portion to be welded is exposed to the atmosphere. Then, welding is conducted. After completion of the welding, water is charged again to the pit and the welding device and fixing jigs are decomposed in a state where the article to be welded is shielded again from radiation by water and the steel plate. Subsequently, the steel plate is removed by remote handling. Then, the article to be welded is returned from the pit to a temporary placing pool by remote handling. This can reduce operator's exposure. Further, since the amount of the shielding materials can be minimized, the amount of radioactive wastes can be decreased. (I.N.)

  6. Avaliação do teor e da estabilidade de vitaminas do complexo B e vitamina C em bebidas isotônicas e energéticas Evaluation of the amount and stability of B group vitamins and vitamin C in power and isotonic beverages

    Directory of Open Access Journals (Sweden)

    Fernanda J. de Castro

    2006-07-01

    Full Text Available Vitamin C stability and concentration was evaluated in isotonic beverages and B group vitamins (B1, B2, B3, B5 and B6 in power beverages. The amount of vitamins was found to be above of that declared on the labels, even after the shelf life had been exceeded. A small decrease in the amount of B group vitamins was observed during the shelf life of the products. In the case of vitamin C this decrease was slightly higher. The present research shows the need of increased quality control and inspection.

  7. Extracción de energía del agua mediante generadores piezoeléctricos

    OpenAIRE

    Rodríguez Mendoza, Iker

    2014-01-01

    El desarrollo del Proyecto consiste, por una parte, en el estudio sobre la respuesta de los materiales piezoeléctricos como generadores de energía en un entorno acuoso que está sometido a variaciones de potencial y, por otra, en el estudio técnico y económico de un equipo basado en la utilización esta fuente de energía y su comercialización en el mercado energético. Esta energía es la que se obtiene de la fuerza de arrastre del agua al desplazarse a causa del movimiento ondulatorio de las ol...

  8. Costo energético de las labores de preparación de suelo en Cuba

    OpenAIRE

    Pedro Paneque Rondón; Dailyn Soto León

    2007-01-01

    El objetivo fundamental del trabajo fue determinar el costo energético de las operaciones agrícolas mecanizadas y comparar los costos energéticos de los distintos tamaños (anchos de trabajo) de los aperos más utilizados en el país para la preparación de suelo, testando la hipótesis de que el costo energético expresado en MJ/ha es independiente del tamaño del equipo. Los resultados de la investigación permitieron llegar a las siguientes conclusiones: los mayores costos energéticos cor...

  9. Consumo alimentar e gasto energético em adolescentes obesos e eutróficos Food consumption and energy expenditure in obese and non-obese adolescents

    Directory of Open Access Journals (Sweden)

    Camila Dayrell

    2009-12-01

    Full Text Available OBJETIVO: Comparar, entre adolescentes obesos e eutróficos, variáveis relacionadas ao consumo alimentar e ao gasto energético. MÉTODOS: Estudo transversal com 23 adolescentes recrutados em escolas e centros de recreação de São Paulo (SP, distribuídos em dois grupos: 11 obesos e 12 eutróficos. Foram avaliados: peso corporal, estatura, índice de massa corporal, circunferência da cintura, massa magra e massa gorda (estimados por bioimpedância elétrica, três recordatórios alimentares de 24 horas, estimativa do gasto energético diário a partir de três métodos (recordatórios de atividade física, fórmulas preditivas e calorimetria indireta, gasto energético de repouso e a potência aeróbia. RESULTADOS: O gasto energético diário dos obesos foi maior, porém a ingestão alimentar se assemelhou à dos eutróficos. Não foram encontradas diferenças no gasto energético de repouso entre os grupos, porém a potência aeróbia foi maior nos eutróficos. A dieta de ambos os grupos não foi considerada saudável, mas os obesos apresentaram menor consumo de vários alimentos considerados saudáveis, como hortaliças. Observou-se discrepância na análise do gasto energético diário, quando se adotaram diferentes métodos. CONCLUSÕES: Os adolescentes apresentaram padrão alimentar associado ao risco de obesidade e doenças crônicas. Mais estudos são necessários para identificar melhores métodos para avaliar seu gasto energético. É urgente a busca de estratégias de educação nutricional específicas para esse grupo etário.OBJECTIVE: To compare food consumption and energy expenditure between obese and non-obese adolescents. METHODS: This cross-sectional study comprised 23 adolescents recruited from schools and recreation centers from São Paulo (SP, Brazil, distributed in two groups: 11 obese and 12 non-obese. The following variables were analyzed: body weight, height, body mass index, waist circumference, fat and lean mass

  10. Thermometry in dielectrophoresis chips for contact-free cell handling

    International Nuclear Information System (INIS)

    Jaeger, M S; Mueller, T; Schnelle, T

    2007-01-01

    Cell biology applications, protocols in immunology and stem cell research, require that individual cells are handled under strict control of their contacts to other cells or synthetic surfaces. Dielectrophoresis (DEP) in microfluidic chips is an established technique to investigate, group, wash, cultivate and sort cells contact-free under physiological conditions: microelectrode octode cages, versatile dielectrophoretic elements energized with radio frequency electric fields, stably trap single cells or cellular aggregates. For medical applications and cell cultivation, possible side effects of the dielectrophoretic manipulation, such as membrane polarization and Joule heating, have to be quantified. Therefore, we characterized the electric field-induced warming in dielectrophoretic cages using ohmic resistance measurements, fluorometry, liquid crystal beads, infra-red thermography and bubble size thermometry. We compare the results of these techniques with respect to the influences of voltage, electric conductivity of buffer, frequency, cage size and electrode surface. We conclude that in the culture medium thermal effects may be neglected if low voltages and an electric field-reducing phase pattern are used. Our experimental results provide explicit values for estimating the thermal effect on dielectrophoretically caged cells and show that Joule heating is best minimized by optimizing the cage geometry and reducing the buffer conductivity. The results may additionally serve to evaluate and improve theoretical predictions on field-induced effects. Based on present-day chip processing possibilities, DEP is well suited for the manipulation of cells

  11. Vulnerabilidad energética en la metrópoli de Buenos Aires

    Directory of Open Access Journals (Sweden)

    Silvina Carrizo

    2014-06-01

    Full Text Available Argentina declaró el uso racional y la eficacia energética una prioridad nacional, en consonancia con las recomendaciones de la Agencia Internacional de la Energía. Buenos Aires se ha comprometido con varios programas internacionales de preparación al cambio climático. Así a distintas escalas surgen iniciativas para modificar las condiciones y modalidades de aprovisionamiento y consumo energéticos, que revelan la precariedad y vulnerabilidad del sistema y los servicios. Este trabajo presenta una reflexión sobre los cambios que se dan en ese sentido, mostrando los inconvenientes del modelo energético argentino en Buenos Aires y las estrategias o medidas que tienden a revertirlos y a preparar la ciudad para situaciones críticas. En general, se trata de iniciativas que se implementan individual o parcialmente, sin que haya un plan integral promovido a escala colectiva. Las correcciones resultan marginales en el conjunto sin aliviar los problemas que se agravan por el crecimiento vertiginoso de las demandas. Entonces la continuidad del modelo energético argentino basado en hidrocarburos, para abastecer infraestructura que trabaja al límite de su capacidad y servir territorios que no se han preparado para las posibles crisis, explicaría la vulnerabilidad del sistema de abastecimiento metropolitano.

  12. Development of high electrical resistance persistent current switch for high speed energization system

    International Nuclear Information System (INIS)

    Jizo, Y.; Furuta, Y.; Nakashima, H.

    1986-01-01

    Japanese National Railways is now developing a superconducting magnetically-levitated train system. A persistent current switch is incorporated in the super-conducting magnet used in the magnetically-levitated train. In recent years, the switch has been required to have higher electrical resistance during its off-state in order to realize the high speed energization/de-energization system of the superconducting magnets. The system aims to decrease evaporation volume of liquid helium during the energization/de-energization of the magnet, by means of energizing the superconducting magnet with high current increasing/decreasing rate. Consequently, it would be possible to decrease the dependence of the on-board magnet system upon the ground cooling system. Through the development of a stable superconductive wire material and a coil structure for the persistent current switch using many small model switches which were produced in order to improve their current carrying capacities, the authors have succeeded in manufacturing the high electrical resistance persistent current switch whose electrical resistance was 5 ohms. The switch, of cylindrical shape, has a diameter of about 100mm, a length of about 100mm. These 5 ohm PCSs are now functioning in stable conditions being incorporated in the superconducting magnets of No.2 vehicle of MLU001 at the JNR's Miyazaki test track. Further, the authors are now developing the PCS of still higher resistance values, such as 50 ohms, through studies for stabilization in structural aspects of the winding and obtaining results therefrom

  13. Perspectivas del potencial energético de la biomasa en el marco global y latinoamericano

    Directory of Open Access Journals (Sweden)

    Julián Rodrigo Quintero González

    2015-06-01

    Full Text Available El calentamiento global y los cambios climáticos que éste conlleva han fomentado desde hace algunos años la exploración de otros tipos de obtención energética para disminuir el uso del combustible fósil, siendo éste último uno de los principales causantes de dicho problema ambiental. El presente artículo expone algunas investigaciones recientes sobre la bioenergía u obtención de energía a partir de biomasa, considerada como energía limpia. Se abarcan temáticas como la bioenergía y sus posibilidades desde el punto de vista energético, teniendo en cuenta las expectativas de producción según su potencial o productividad energética, además del aporte que este tipo de tecnología hace a la disminución de la huella ecológica.

  14. The Roles of Fluid Compression and Shear in Electron Energization during Magnetic Reconnection

    Science.gov (United States)

    Li, Xiaocan; Guo, Fan; Li, Hui; Birn, Joachim

    2018-03-01

    Particle acceleration in space and astrophysical reconnection sites is an important unsolved problem in studies of magnetic reconnection. Earlier kinetic simulations have identified several acceleration mechanisms that are associated with particle drift motions. Here, we show that, for sufficiently large systems, the energization processes due to particle drift motions can be described as fluid compression and shear, and that the shear energization is proportional to the pressure anisotropy of energetic particles. By analyzing results from fully kinetic simulations, we show that the compression energization dominates the acceleration of high-energy particles in reconnection with a weak guide field, and the compression and shear effects are comparable when the guide field is 50% of the reconnecting component. Spatial distributions of those energization effects reveal that reconnection exhausts, contracting islands, and island-merging regions are the three most important regions for compression and shear acceleration. This study connects particle energization by particle guiding-center drift motions with that due to background fluid motions, as in the energetic particle transport theory. It provides foundations for building particle transport models for large-scale reconnection acceleration such as those in solar flares.

  15. Effects of two psychological factors on perceived conflict-handling ...

    African Journals Online (AJOL)

    The study examined the predictive power of two psychological factors: assertiveness and emotional intelligence on perceived conflict-handling behaviour of labour leaders in Lagos State, Nigeria. A survey research design was adopted and 250 labour leaders were randomly selected from ten (10) industrial unions in Lagos ...

  16. VVER NPPs fuel handling machine control system

    International Nuclear Information System (INIS)

    Mini, G.; Rossi, G.; Barabino, M.; Casalini, M.

    2002-01-01

    In order to increase the safety level of the fuel handling machine on WWER NPPs, Ansaldo Nucleare was asked to design and supply a new Control System. Two Fuel Handling Machine (FHM) Control System units have been already supplied for Temelin NPP and others supply are in process for the Atommash company, which has in charge the supply of FHMs for NPPs located in Russia, Ukraine and China.The computer-based system takes into account all the operational safety interlocks so that it is able to avoid incorrect and dangerous manoeuvres in the case of operator error. Control system design criteria, hardware and software architecture, and quality assurance control, are in accordance with the most recent international requirements and standards, and in particular for electromagnetic disturbance immunity demands and seismic compatibility. The hardware architecture of the control system is based on ABB INFI 90 system. The microprocessor-based ABB INFI 90 system incorporates and improves upon many of the time proven control capabilities of Bailey Network 90, validated over 14,000 installations world-wide.The control system complies all the former designed sensors and devices of the machine and markedly the angular position measurement sensors named 'selsyn' of Russian design. Nevertheless it is fully compatible with all the most recent sensors and devices currently available on the market (for ex. Multiturn absolute encoders).All control logic were developed using standard INFI 90 Engineering Work Station, interconnecting blocks extracted from an extensive SAMA library by using a graphical approach (CAD) and allowing and easier intelligibility, more flexibility and updated and coherent documentation. The data acquisition system and the Man Machine Interface are implemented by ABB in co-operation with Ansaldo. The flexible and powerful software structure of 1090 Work-stations (APMS - Advanced Plant Monitoring System, or Tenore NT) has been successfully used to interface the

  17. Safety procedures for the MFTF sustaining-neutral-beam power supply

    International Nuclear Information System (INIS)

    Wilson, J.H.

    1981-01-01

    The MFTF SNBPSS comprises a number of sources of potentially hazardous electrical energy in a small physical area. Power is handled at 80 kV dc, 80 A; 70 V dc, 4000 A; 25 V dc, 5500 A; 3 kV dc, 10 A; and 2 kV dc, 10 A. Power for these systems is furnished from two separate 480 V distribution systems and a 13.8 kV distribution system. A defense in depth approach is used; interlocks are provided in the hardware to make it difficult to gain access to an energized circuit, and the operating procedure includes precautions which would protect personnel even if no interlocks were working. The complexity of the system implies a complex operating procedure, and this potential complexity is controlled by presenting the procedure in a modular form using 37 separate checklists for specific operations. The checklists are presented in flowchart form, so contingencies can be handled at the lowest possible level without compromising safety

  18. Propuesta de la certificación energética, mediante simulación dinámica, como herramienta de gestión energética ISO 50001 Versus auditoria energética en edificios.

    OpenAIRE

    Rey Hernández, Javier María; Rey Hernández, Alberto; Velasco, Eloy; San José, Julio; Rey Martinez, Francisco Javier

    2017-01-01

    Producción Científica El objetivo es el estudio de la gestión energética ISO 50001, mediante las herramientas de sistema de gestión tales como la auditoría energética y compararlo con la certificación energética mediante simulación dinámica, aplicadas a un edificio universitario estándar. La metodología empleada para alcanzar unos resultados de ahorro y eficiencia energética, aplicados a un edificio universitario, pretenden servir de modelo para poder extrapolarlos a edificios que compo...

  19. Experience in handling concentrated tritium

    International Nuclear Information System (INIS)

    Holtslander, W.J.

    1985-12-01

    The notes describe the experience in handling concentrated tritium in the hydrogen form accumulated in the Chalk River Nuclear Laboratories Tritium Laboratory. The techniques of box operation, pumping systems, hydriding and dehydriding operations, and analysis of tritium are discussed. Information on the Chalk River Tritium Extraction Plant is included as a collection of reprints of papers presented at the Dayton Meeting on Tritium Technology, 1985 April 30 - May 2

  20. Confinement facilities for handling plutonium

    International Nuclear Information System (INIS)

    Maraman, W.J.; McNeese, W.D.; Stafford, R.G.

    1975-01-01

    Plutonium handling on a multigram scale began in 1944. Early criteria, equipment, and techniques for confining contamination have been superseded by more stringent criteria and vastly improved equipment and techniques for in-process contamination control, effluent air cleaning and treatment of liquid wastes. This paper describes the evolution of equipment and practices to minimize exposure of workers and escape of contamination into work areas and into the environment. Early and current contamination controls are compared. (author)

  1. Remote handling equipment for SNS

    International Nuclear Information System (INIS)

    Poulten, B.H.

    1983-01-01

    This report gives information on the areas of the SNS, facility which become highly radioactive preventing hands-on maintenance. Levels of activity are sufficiently high in the Target Station Area of the SNS, especially under fault conditions, to warrant reactor technology to be used in the design of the water, drainage and ventilation systems. These problems, together with the type of remote handling equipment required in the SNS, are discussed

  2. Remote handling in reprocessing plants

    International Nuclear Information System (INIS)

    Streiff, G.

    1984-01-01

    Remote control will be the rule for maintenance in hot cells of future spent fuel reprocessing plants because of the radioactivity level. New handling equipments will be developed and intervention principles defined. Existing materials, recommendations for use and new manipulators are found in the PMDS' documentation. It is also a help in the choice and use of intervention means and a guide for the user [fr

  3. Equipment for the handling of thorium materials

    International Nuclear Information System (INIS)

    Heisler, S.W. Jr.; Mihalovich, G.S.

    1988-01-01

    The Feed Materials Production Center (FMPC) is the United States Department of Energy's storage facility for thorium. FMPC thorium handling and overpacking projects ensure the continued safe handling and storage of the thorium inventory until final disposition of the materials is determined and implemented. The handling and overpacking of the thorium materials requires the design of a system that utilizes remote handling and overpacking equipment not currently utilized at the FMPC in the handling of uranium materials. The use of remote equipment significantly reduces radiation exposure to personnel during the handling and overpacking efforts. The design system combines existing technologies from the nuclear industry, the materials processing and handling industry and the mining industry. The designed system consists of a modified fork lift truck for the transport of thorium containers, automated equipment for material identification and inventory control, and remote handling and overpacking equipment for material identification and inventory control, and remote handling and overpacking equipment for repackaging of the thorium materials

  4. Enteral Feeding Set Handling Techniques.

    Science.gov (United States)

    Lyman, Beth; Williams, Maria; Sollazzo, Janet; Hayden, Ashley; Hensley, Pam; Dai, Hongying; Roberts, Cristine

    2017-04-01

    Enteral nutrition therapy is common practice in pediatric clinical settings. Often patients will receive a pump-assisted bolus feeding over 30 minutes several times per day using the same enteral feeding set (EFS). This study aims to determine the safest and most efficacious way to handle the EFS between feedings. Three EFS handling techniques were compared through simulation for bacterial growth, nursing time, and supply costs: (1) rinsing the EFS with sterile water after each feeding, (2) refrigerating the EFS between feedings, and (3) using a ready-to-hang (RTH) product maintained at room temperature. Cultures were obtained at baseline, hour 12, and hour 21 of the 24-hour cycle. A time-in-motion analysis was conducted and reported in average number of seconds to complete each procedure. Supply costs were inventoried for 1 month comparing the actual usage to our estimated usage. Of 1080 cultures obtained, the overall bacterial growth rate was 8.7%. The rinse and refrigeration techniques displayed similar bacterial growth (11.4% vs 10.3%, P = .63). The RTH technique displayed the least bacterial growth of any method (4.4%, P = .002). The time analysis in minutes showed the rinse method was the most time-consuming (44.8 ± 2.7) vs refrigeration (35.8 ± 2.6) and RTH (31.08 ± 0.6) ( P refrigerating the EFS between uses is the next most efficacious method for handling the EFS between bolus feeds.

  5. El hidrógeno y la energía

    OpenAIRE

    Aurelio Mendoza Medellín

    2006-01-01

    El hidrógeno es el elemento más simple, pero es fundamental para la vida. En el futuro sustituirá a los combustibles fósiles como fuente de energía para las máquinas hechas por el hombre. Hoy en día su uso es muy caro, pero ya existen motores que trabajan quemando este gas. En el sol la fusión de hidrógeno libera cantidades inconmensurables de energía, que en parte es captada por los cloroplastos, que la transforman en la energía química contenida en los carbohidratos resultantes de la fotosí...

  6. El hidrógeno y la energía

    OpenAIRE

    Aurelio Mendoza Medellín

    2006-01-01

    El hidrógeno es el elemento más simple, pero es fundamental para la vida. En el futuro sustituirá a los combustibles fósiles como fuente de energía para las máquinas hechas por el hombre. Hoy en día su uso es muy caro, pero ya existen motores que trabajan quemando este gas. En el sol la fusión de hidrógeno libera cantidades inconmensurables de energía, que en parte es captada por los cloroplastos, que la transforman en la energía química contenida en los carbohidratos resultantes ...

  7. Los balances energéticos en la producción agropecuaria.

    OpenAIRE

    Yepes Jaramillo, Guillermo; Martínez Bustamante, Enrique

    2011-01-01

    A través de este ensayo se presenta otro enfoque de análisis de la energía utilizada por los vegetales para la producción agraria. Se parte de los conceptos fundamentales relacionados con la termodinámica y la manera como el flujo de energía incide sobre el follaje de la vegetación y se distribuye, a través de las hojas, en todo el dosel de comunidades de plantas. La vida en la tierra es mantenida por el flujo de energía radiado por el sol y que entra en la biosfera. Por medio de la fotosínte...

  8. Síntesis de nitruro de titanio mediante láser y energía solar concentrada

    Directory of Open Access Journals (Sweden)

    García, I.

    1998-04-01

    Full Text Available The possibility of the employment of solar energy concentrated by Fresnel lens is investigated in order to synthesize materials by gas-solid reaction. These first results are compared by two similar techniques as high power laser and xenon are lamp. The TiN coatings obtained with xenon are lamp and Fresnel lens are homogenous, without pores or defects, with a uniform thickness of about 6 μm for treatments of 2 min. The good quality of the TiN coating for all the testing conditions was confirmed by the x-ray diffraction measurements.

    Se presenta la utilización de la energía solar concentrada mediante lentes de Fresnel para la síntesis de materiales por reacción gas-sólido. Estos primeros resultados sobre nitruración superficial de titanio y aleaciones de titanio se comparan con los obtenidos con técnicas similares como el láser de alta potencia y la lámpara de descarga de xenón. Las capas de nitruro de titanio obtenidas mediante energía solar concentrada por lentes de Fresnel y lámpara de xenón son homogéneas, sin grietas ni defectos, y con un espesor uniforme de 6 μm en tiempos de sólo 2 min. La buena calidad de estas capas se confirma mediante difracción de rayos X.

  9. Eficiencia energética de los edificios: repercusión medioambiental

    Directory of Open Access Journals (Sweden)

    Maria Nieves Pacheco Jiménez

    2009-06-01

    Full Text Available Los recientes Planes, Estrategias y normas atinentes al fomento de la eficiencia energética en los edificios1 nacen en un contexto de preocupación por el cambio climático y sus consecuencias. Todos ellos persiguen la reducción de costes energéticos y la promoción de la sostenibilidad económica, política y ambiental. Un reflejo de esta inquietud por el bajo impacto ambiental puede observarse en el sector de la vivienda, cuyo consumo final de energía es muy elevado, y en la consiguiente intención de construir edificios bioclimáticos que aprovechen la energía del entorno. En aras a la consecución de estos objetivos, el Plan de Acción 2008-2012 impulsa una serie de medidas que recaen sobre el sector transporte, la industria, el sector residencial y el sector terciario, articulándose en torno a cuatro líneas de actuación: transversal, de movilidad, de edificios y de ahorro eléctrico. Este estudio aborda las pautas de ahorro y eficiencia energética propuestas para los edificios, tanto existentes como de nueva construcción, así como residenciales y del sector terciario. Para ello se hace imprescindible la remisión al concepto de “calidad” de los edificios, contemplado en la propia Exposición de Motivos de la Ley 38/1999, de Ordenación de la Edificación, y ligado estrechamente a la eficiencia energética de aquéllos.

  10. Homes with low energy consumption. Types of design in the Cuban context / Viviendas con bajo consumo energético. Tipologías de diseño en el contexto cubano

    Directory of Open Access Journals (Sweden)

    Carmen Leyva Fontes

    2016-09-01

    Full Text Available The slums in the context of the sustainable development stopped being a particular preoccupation to become basic slogans, transformed into measures to be applied in the different countries. In form it compares the recognition of the limited thing of the present power reserves has caused, at world-wide level, a reconsideration in the search and power advantage of the sources and systems. Under these terms, the house adapted for all and the sustainable use of the energy, form main part in premises of programs and projects maintained at world-wide level. Generally, the plans of social interest that aim to solve habitacionales necessities or of equipment do not consider the procedure methodologies and they do not incorporate in its designs basic criteria that sustains an architecture based on the adapted use of the energy on the base of the criteria of the power sustainability, leaving a vast eld of application free, therefore constitutes objective of this work to propose variants of houses with low power consumption for the city of Camagüey, that make possible a rational use of the energy. The results indicate that the current status of implementation of the parameters of sustainability in housing Camagüey, evidence is still insuf cient implementation of energy ef ciency indicators in housing, detecting de ciencies in: location, shape and orientation, control and use of natural lighting and ventilation respectively and structural design of the building. Also, propose design typologies that meet energy sustainability parameters. Los asentamientos humanos en el contexto del desarrollo sostenible dejaron de ser una preocupación particular para convertirse en consignas básicas, transformadas en medidas para ser aplicadas en los diferentes países. En forma paralela el reconocimiento de lo limitado de las actuales reservas energéticas ha provocado, a nivel mundial, una reconsideración en la búsqueda y aprovechamiento de las fuentes y sistemas

  11. The handling of data from experiments

    CERN Document Server

    Davies, H E

    1974-01-01

    The use of small computers in on-line experiments in high-energy physics is briefly indicated. The requirement for an above-average performance (data-handling rates up to 1.5 Mbit/sec) is described, emphasizing the problem of data acquisition; data rates and buffering, data storage, and the importance of flexibility are dealt with. The discussion of hardware solutions to the special problems posed by on- line experiments includes the use of CAMAC interfaces, systems of linked computers, and the use of special processors which perform the first steps of data analysis very rapidly. A section on the software solution to data acquisition problems treats the requirements for flexibility and ease of use, giving as an example a comparison of a manufacturer-supplied Editor and CERN's ORION Editor, and concludes with an outline of the need for direct access to more powerful computers, giving as an illustration the FOCUS and Omega/SFM networks. (0 refs).

  12. Handling of tritium-bearing wastes

    International Nuclear Information System (INIS)

    1981-01-01

    The generation of nuclear power and reprocessing of nuclear fuel results in the production of tritium and the possible need to control the release of tritium-contaminated effluents. In assessing the need for controls, it is necessary to know the production rates of tritium at different nuclear facilities, the technologies available for separating tritium from different gaseous and liquid streams, and the methods that are satisfactory for storage and disposal of tritiated wastes. The intention in applying such control technologies and methods is to avoid undesirable effects on the environment, and to reduce the radiation burden on operational personnel and the general population. This technical report is a result of the IAEA Technical Committee Meeting on Handling of Tritium-bearing Effluents and Wastes, which was held in Vienna, 4 - 8 December 1978. It summarizes the main topics discussed at the meeting and appends the more detailed reports on particular aspects that were prepared for the meeting by individual participants

  13. Climatización de una vivienda con energía geotérmica

    OpenAIRE

    González Elosua, Ignacio Isaías

    2013-01-01

    El presente proyecto consiste en el estudio, diseño y definición de una instalación de aprovechamiento de energía geotérmica para la climatización a lo largo de todo el año de una vivienda unifamiliar en la localidad de Fornells en el término municipal de Es Mercadal, en Menorca. Para ello, se ha calculado la demanda energética térmica requerida por la vivienda debido a su forma arquitectónica, materiales empleados y necesidades interiores, siguiendo criterios legales, funcionales y constr...

  14. La Reforma Energética: a 20 años del TLCAN

    OpenAIRE

    Vargas, Rosío

    2015-01-01

    La visita del presidente estadounidense Barack Obama a México, en mayo de 2013, fue la ocasión para buscar el acceso al petróleo y gas mexicano, amparado en el argumento de los 20 años del TLCAN, bajo "la necesidad" de su relanzamiento. Cabilderos nacionales y extranjeros se dieron a la tarea de elaborar la estrategia para la apertura total del sector energético mexicano bajo la propuesta de la Reforma Energética mexicana, aprobada el 20 de diciembre de 2013. En las modificaciones constitucio...

  15. Mejora de la eficiencia energética en una vivienda

    OpenAIRE

    Díaz Oliva, Marc

    2013-01-01

    El objetivo de este proyecto es la mejora de la eficiencia energética de la vivienda este objetivo me viene por una estancia en Alemania donde todas las viviendas están concebidas para obtener la máxima eficiencia y por consiguiente ahorro una de las cosas que más me llamo la atención fue la implantación de energías renovables ya que las horas de luz son menores a las obtenidas en España por este motivo quise comprobar cuanto se podía mejorar la eficiencia en mi vivienda y s...

  16. Estudio comparativo de eficiencia energética: Fachada ventilada frente a fachada vegetal

    OpenAIRE

    Azkorra Larrinaga, Zaloa

    2015-01-01

    398 p. + anexos En la actualidad se desarrollan multitud de investigaciones relacionadas con la rehabilitación energética lo que la ha convertido en un campo emergente en el sector de la construcción y de la arquitectura.El objetivo general de la tesis es evaluar la aplicabilidad de diferentes sistemas pasivos de rehabilitación de fachadas (fachada ventilada y fachada vegetal) y analizar los beneficios de la incorporación de dichos sistemas en el ahorro energético de edificios.Para ello, s...

  17. Energía de oleaje en la isla de Tenerife

    OpenAIRE

    Imaz Gómez, Mario

    2016-01-01

    El objeto de este proyecto es realizar todos los estudios necesarios para la construcción de la primera fase de un parque de dispositivos de extracción de energía undimotriz que permita obtener información fiable y necesaria sobre el comportamiento de los dispositivos en grupo y poder ver si el rendimiento es el esperado para posteriormente realizar las otras dos fases con el fin de abastecer a la ciudad de Puerto de la Cruz, situada en el norte de la isla de Tenerife. Actualmente las energía...

  18. Sustentabilidad empresarial, seguridad energética y ética ambiental en Chile

    OpenAIRE

    Suárez,Andrés

    2013-01-01

    El artículo explora la relación entre sustentabilidad empresarial -asociada tanto a la rentabilidad financiera como a las relaciones con colectivos locales- y el medioambiente, en el contexto de una economía internacionalizada como la chilena. Asimismo, analiza conflictos recientes originados en Chile para la provisión de energía y las dificultades en la definición de una matriz energética, y, finalmente, la influencia de la ética ecológica para la preservación de los ecosistemas de alta biod...

  19. Proyectos pilotos WHIX de energía renovable y seguridad ambiental en El Salvador.

    OpenAIRE

    Ochoa Córdova, Carlos Roberto

    2008-01-01

    El Programa WHIX aporta proyectos de Energía y Medio Ambiente para abrir un diálogo entre los militares de la Región, organizaciones gubernamentales y no-gubernamentales y sus equivalentes en los EE.UU. Este programa cataliza proyectos de energía renovable y el medioambiente para demostrar y validar estas tecnologías en los países de la región. Al mismo tiempo provee un foro de intercambio internacional de las “Mejores Prácticas” y la oportunidad de trabajar en conjunto en promisorias investi...

  20. Cómo producen energía las células

    OpenAIRE

    Carlos Alberto Ordoñez

    2014-01-01

    El adenosín trifosfato (ATP), es la moneda energética de los seres vivos. Para poder ser sintetizado, los organismos requieren oxidar los sustratos energéticos de la dieta, proteínas, grasas y carbohidratos. Inicialmente estas sustancias tienen vías metabólicas separadas hasta alcanzar en su degradación un metabolito común que es el acetil CoA. A partir de este punto entran al ciclo de Krebs, con producción de CO2 e hidrogeniones, estos últimos se transportan por óxido reducción a la cadena r...

  1. Problemas institucionales de las energías renovables en México

    OpenAIRE

    Samuel Brugger; Ma. Elena Nancy Dávila Moreno; Manuel Francisco Llamas Galván

    2011-01-01

    Este ensayo trata de explicar los problemas institucionales y jurídicos que han limitado el aprovechamiento de dichas energías alternativas. El trabajo presenta la situación actual de México; después analiza el potencial que tiene el país. De ahí se pasa al estudio de la problemática institucional y jurídica que no ha logrado fomentar la promoción de energías renovables en México.

  2. Limitaciones para el desarrollo de energías renovables en Argentina

    OpenAIRE

    Marina Yesica Recalde; Daniel Hugo Bouille; Leónidas Osvaldo Girardin

    2015-01-01

    En las últimas décadas las energías renovables han cobrado impulso a nivel mundial con un significativo impacto sobre el desarrollo sustentable de las naciones. Si bien diferentes trabajos analizan la eficiencia de políticas e instrumentos para la promoción de dichas fuentes, la mayoría de las veces se deja de lado el análisis de cómo el contexto en el cual las políticas son implementadas determina su performance. En este trabajo se analiza el desarrollo de las energías renovables en el merca...

  3. Análisis armónico de compensadores de energía reactiva

    OpenAIRE

    González Hernández, Jaime

    2011-01-01

    Desde la implantación de la generación y distribución de la energía eléctrica en corriente alterna, la energía reactiva ha sido un factor clave en el diseño y explotación de los consumos y redes eléctricas. El carácter reactivo (inductivo) que presentan, en general, los consumos y los elementos de las redes eléctricas han hecho aparecer a lo largo del tiempo distintos dispositivos y técnicas que buscan "compensar" ese carácter reactivo.

  4. Problemas institucionales de las energías renovables en México

    Directory of Open Access Journals (Sweden)

    Samuel Brugger

    2011-09-01

    Full Text Available Este ensayo trata de explicar los problemas institucionales y jurídicos que han limitado el aprovechamiento de dichas energías alternativas. El trabajo presenta la situación actual de México; después analiza el potencial que tiene el país. De ahí se pasa al estudio de la problemática institucional y jurídica que no ha logrado fomentar la promoción de energías renovables en México.

  5. Generación de energía eléctrica en la edificación mediante tecnología de disco Stirling =Electrical energy generation in building by means of Stirling dish technology

    Directory of Open Access Journals (Sweden)

    Carlos Morón

    2017-08-01

    Full Text Available La creciente demanda de energía acompañada de los elevados niveles de emisión de gases contaminantes a la atmosfera hace patente la necesidad de encontrar nuevos sistemas de producción de energía. Una de las posibles alternativas se encuentra en la energía solar de concentración, y más concretamente en la tecnología termosolar con motor Stirling que alcanza unos niveles de rendimiento muy superiores a la energía solar fotovoltaica en cuanto a producción de energía eléctrica. En este trabajo se muestra el diseño y la caracterización de un prototipo de captador paraboloidal con motor Stirling, que permite obtener datos reales del funcionamiento de este tipo de sistemas. Esto permitirá modelizar de manera real el comportamiento esperado de equipos comerciales reales antes de abordar su implantación en edificios y viviendas unifamiliares. Abstract The increasing demand for energy accompanied by high level of emission of the contaminating gases into the atmosphere underscores the need to find new energy production systems. One of the possible alternatives is concentrating solar power and, more specifically, solar thermal technology with a Stirling engine that reaches higher performance levels than photovoltaic solar energy in terms of electricity generation. This paper shows the design and characterization of a prototype paraboloidal collector with a Stirling engine that allows obtaining real data of this type of systems functioning. This will allow modelling in a real way of expected performance of real commercial devices before approaching their introduction in buildings and single-family houses.

  6. Reviewing reactor engineering and fuel handling

    International Nuclear Information System (INIS)

    1991-12-01

    Experience has shown that the better operating nuclear power plants have well defined and effectively administered policies and procedures for governing reactor engineering and fuel handling (RE and FH) activities. This document provides supplementary guidance to OSART experts for evaluating the RE and FH programmes and activities at a nuclear power plant and assessing their effectiveness and adequacy. It is in no way intended to conflict with existing regulations and rules, but rather to exemplify those characteristics and features that are desirable for an effective, well structured RE and FH programme. This supplementary guidance addresses those aspects of RE and FH activities that are required in order to ensure optimum core operation for a nuclear reactor without compromising the limits imposed by the design, safety considerations of the nuclear fuel. In the context of this document, reactor engineering refers to those activities associated with in-core fuel and reactivity management, whereas fuel handling refers to the movement, storage, control and accountability of unirradiated and irradiated fuel. The document comprises five main sections and several appendices. In Section 2 of this guide, the essential aspects of an effective RE and FH programme are discussed. In Section 3, the various types of documents and reference materials needed for the preparatory work and investigation are listed. In Section 4, specific guidelines for investigation of RE and FH programmes are presented. In Section 5, the essential attributes of an excellent RE and FH programme are listed. The supplementary guidance is concluded with a series of appendices exemplifying the various qualities and attributes of a sound, well defined RE and FH programme

  7. Estudio de viabilidad de un sistema de generación de energía eléctrica basado en energías renovables para países en vías de desarrollo

    OpenAIRE

    Villanueva Fernández, Gemma

    2010-01-01

    En este proyecto, primero se realiza una pequeña introducción para que el lector adquiera unos conocimientos mínimos sobre las energías renovables. Posteriormente, se describe los conceptos básicos de la energía solar fotovoltaica y los materiales usados en la misma. La energía solar fotovoltaica, es una transformación de la energía luminosa en energía eléctrica. El material más utilizado en la fabricación de los paneles solares es el silicio. De igual forma, se describe conceptos básicos de ...

  8. Desarrollo e implantación de energías renovables: situación actual y tendencias

    OpenAIRE

    Picó Heras, Sergio

    2002-01-01

    En esta tesina se tratarán las posibilidades que ofrecen las energías renovables com base de una planificicación energética. El tema se enfocará tanto desde puntos de vista económicos, ambientales, técnicos, políticos, etc

  9. Energizing the future: New battery technology a reality today

    Science.gov (United States)

    Chase, Henry; Bitterly, Jack; Federici, Al

    1997-04-01

    The U.S. Flywheel Systems' flywheel energy storage system could be the answer to a critical question: How do we replace conventional chemical batteries with a more-efficient system that lasts longer and is non-polluting? The new product, which has a virtually unlimited life expectancy, has a storage capacity four times greater per pound than conventional chemical batteries. USFS designed and built each component of the system—from the specially wound carbon fiber wheel, the magnetic bearing, the motor/generator, and the electronic control. The flywheel is designed to spin at speeds up to 100,000 rpm and deliver about 50 horsepower using a proprietary high-speed, high-power-density motor/generator that is the size of a typical coffee mug. Some of the important markets and applications for the flywheel storage system include electric vehicles, back-up power supply, peak power smoothing, satellite energy storage systems, and locomotive power.

  10. 7 CFR 926.9 - Handle.

    Science.gov (United States)

    2010-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle...

  11. HMSRP Hawaiian Monk Seal Handling Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

  12. Nexo agua-energía: desde el nacimiento del río Llobregat hasta Manresa

    OpenAIRE

    Prieto Márquez, Kelly; Badia Padilla, Ester; Grau Vilalta, Maria Dolors

    2017-01-01

    En este trabajo se estudia el nexo agua-energía en el tramo del río Llobregat desde Castellar de N’hug hasta Manresa. Se lleva a cabo una evaluación de la cantidad de energía necesaria en las estaciones potabilizadoras y depuradoras para adecuar el agua del río, además de determinar la cantidad de energía que generan las centrales mini-hidroeléctricas. Estos dos valores de energía finales son comparados para demostrar si se consume más energía que la que se genera, o al contrario. Se estud...

  13. ERROR HANDLING IN INTEGRATION WORKFLOWS

    Directory of Open Access Journals (Sweden)

    Alexey M. Nazarenko

    2017-01-01

    Full Text Available Simulation experiments performed while solving multidisciplinary engineering and scientific problems require joint usage of multiple software tools. Further, when following a preset plan of experiment or searching for optimum solu- tions, the same sequence of calculations is run multiple times with various simulation parameters, input data, or conditions while overall workflow does not change. Automation of simulations like these requires implementing of a workflow where tool execution and data exchange is usually controlled by a special type of software, an integration environment or plat- form. The result is an integration workflow (a platform-dependent implementation of some computing workflow which, in the context of automation, is a composition of weakly coupled (in terms of communication intensity typical subtasks. These compositions can then be decomposed back into a few workflow patterns (types of subtasks interaction. The pat- terns, in their turn, can be interpreted as higher level subtasks.This paper considers execution control and data exchange rules that should be imposed by the integration envi- ronment in the case of an error encountered by some integrated software tool. An error is defined as any abnormal behavior of a tool that invalidates its result data thus disrupting the data flow within the integration workflow. The main requirementto the error handling mechanism implemented by the integration environment is to prevent abnormal termination of theentire workflow in case of missing intermediate results data. Error handling rules are formulated on the basic pattern level and on the level of a composite task that can combine several basic patterns as next level subtasks. The cases where workflow behavior may be different, depending on user's purposes, when an error takes place, and possible error handling op- tions that can be specified by the user are also noted in the work.

  14. LACIE data-handling techniques

    Science.gov (United States)

    Waits, G. H. (Principal Investigator)

    1979-01-01

    Techniques implemented to facilitate processing of LANDSAT multispectral data between 1975 and 1978 are described. The data that were handled during the large area crop inventory experiment and the storage mechanisms used for the various types of data are defined. The overall data flow, from the placing of the LANDSAT orders through the actual analysis of the data set, is discussed. An overview is provided of the status and tracking system that was developed and of the data base maintenance and operational task. The archiving of the LACIE data is explained.

  15. The handling of radiation accidents

    International Nuclear Information System (INIS)

    Macdonald, H.F.; Orchard, H.C.; Walker, C.W.

    1977-04-01

    Some of the more interesting and important contributions to a recent International Symposium on the Handling of Radiation Accidents are discussed and personal comments on many of the papers presented are included. The principal conclusion of the Symposium was that although the nuclear industry has an excellent safety record, there is no room for complacency. Continuing attention to emergency planning and exercising are essential in order to maintain this position. A full list of the papers presented at the Symposium is included as an Appendix. (author)

  16. Examples of remote handling of irradiated fuel assemblies in Germany

    International Nuclear Information System (INIS)

    Peehs, M.; Knecht, K.

    1999-01-01

    Examples for the remote handling of irradiated fuel in Germany are presented in the following areas: - fuel assembling pool service activities; - early encapsulation of spent fuel in the pool of a nuclear power plant (NPP) at the end of the wet storage period. All development in remote fuel assembly handling envisages minimization of the radioactive dose applied to the operating staff. In the service area a further key objective for applying advanced methods is to perform the work faster and at a higher quality standard. The early encapsulation is a new technology to provide the final packaging of spent fuel already in the pool of a NPP to ensure reliable handling for all further back end processes. (author)

  17. DISPOSAL CONTAINER HANDLING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    E. F. Loros

    2000-06-30

    by the WHB Ventilation System, which in conjunction with ventilation boundaries ensure that airborne radioactivity is confined by high efficiency particulate air filtration units. Electrical power is supplied by the Waste Handling Building Electrical System. The system also interfaces with each of the DC systems. New DCs are received from a commercial transport system.

  18. 7 CFR 58.443 - Whey handling.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of whey. If outside, necessary precautions shall be taken to minimize flies, insects and development of...

  19. Flexible Electrostatic Technologies for Capture and Handling, Phase 1

    Science.gov (United States)

    Bryan, Thomas

    2015-01-01

    Fundamental to many of NASA's in-space transportation missions is the capture and handling of various objects and vehicles in various orbits for servicing, debris disposal, sample retrieval, and assembly without the benefit of sufficient grapple fixtures and docking ports. To perform similar material handling tasks on Earth, pincher grippers, suction grippers, or magnetic chucks are used, but are unable to reliably grip aluminum and composite spacecraft, insulation, radiators, solar arrays, or extra-terrestrial objects in the vacuum of outer space without dedicated handles in the right places. The electronic Flexible Electrostatic Technologies for space Capture and Handling (FETCH) will enable reliable and compliant gripping (soft dock) of practically any object in various orbits or surfaces without dedicated mechanical features, very low impact capture, and built-in proximity sensing without any conventional actuators. Originally developed to handle semiconductor and glass wafers during vacuum chamber processing without contamination, the normal rigid wafer handling chucks are replaced with thin metal foil segments laminated in flexible insulation driven by commercial off-the-shelf solid state, high-voltage power supplies. Preliminary testing in NASA Marshall Space Flight Center's (MSFC's) Flat Floor Robotics Lab demonstrated compliant alignment and gripping with a full-sized, 150-lb microsat mockup and translation before a clean release with a flip of a switch. The flexible electrostatic gripper pads can be adapted to various space applications with different sizes, shapes, and foil electrode layouts even with openings through the gripper pads for addition of guidance sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 lb/in2 or 70-300 lb/ft2 of surface contact, the FETCH can turn on and off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, precision relocation, and surface translation

  20. El hidrógeno y la energía

    Directory of Open Access Journals (Sweden)

    Aurelio Mendoza Medellín

    2006-01-01

    Full Text Available El hidrógeno es el elemento más simple, pero es fundamental para la vida. En el futuro sustituirá a los combustibles fósiles como fuente de energía para las máquinas hechas por el hombre. Hoy en día su uso es muy caro, pero ya existen motores que trabajan quemando este gas. En el sol la fusión de hidrógeno libera cantidades inconmensurables de energía, que en parte es captada por los cloroplastos, que la transforman en la energía química contenida en los carbohidratos resultantes de la fotosíntesis. Esto implica la transferencia del hidrógeno del agua al dióxido de carbono. Los animales liberan la energía de los combustibles biológicos revirtiendo dicha reacción a través del metabolismo oxidativo, la cadena respiratoria y la fosforilación oxidativa. El hidrógeno es vital para producir ATP y por lo tanto para la vida.

  1. Effectiveness of the Energize Elementary School Program to Improve Diet and Exercise

    Science.gov (United States)

    Herbert, Patrick C.; Lohrmann, David K.; Seo, Dong-Chul; Stright, Anne D.; Kolbe, Lloyd J.

    2013-01-01

    Background: The rate of childhood obesity has more than tripled during the past 30?years. Research shows that prevention at an early age is more effective than treatment later in life. Energize is a multicomponent intervention incorporated into the school day that combines nutrition education and physical activity aimed at maintaining healthy…

  2. Gas exchange and leaf contents in bell pepper under energized water and biofertilizer doses

    Directory of Open Access Journals (Sweden)

    Francisca R. M. Borges

    2016-06-01

    Full Text Available ABSTRACT The objective of this study was to evaluate the effect of energized water and bovine biofertilizer doses on the gas exchange and NPK contents in leaves of yellow bell pepper plants. The experiment was conducted at the experimental area of the Federal University of Ceará, in Fortaleza-CE, Brazil, from June to November 2011. The experiment was set in a randomized block design, in a split-plot scheme; the plots were composed of treatments with energized and non-energized water and the subplots of five doses of liquid biofertilizer (0, 250, 500, 750 and 1000 mL plant-1 week-1. The following variables were analyzed: transpiration, stomatal conductance, photosynthesis and leaf contents of nitrogen (N, phosphorus (P and potassium (K. Water energization did not allow significant increases in the analyzed variables. The use of biofertilizer as the only source of fertilization was sufficient to provide the nutrients N, P and K at appropriate levels for the bell pepper crop.

  3. Proyecto Energético Palmdale; Decisión del Permiso Final

    Science.gov (United States)

    Proyecto Energético Palmdale: EPA Región 9 por el presente emite aviso de su decisión final, el cumplimiento con la Ley Federal de Aire Limpio, para la construcción de una planta generadora de electricidad de ciclo combinado y alimentada por gas natural

  4. Implicaciones ambientales de las tecnologías de energía renovable

    Directory of Open Access Journals (Sweden)

    Jan Mahirt-Smith

    2011-12-01

    Full Text Available Las tecnologías de energía renovable como la eólica, la solar y la biomasa, hacen un uso del suelo más intenso que las de combustibles fósiles tradicionales y, geográficamente, sus implicaciones ambientales son más heterogéneas, por lo que presentan un gran desafío para las técnicas de evaluación de su ciclo de vida. Este trabajo presenta los resultados de una investigación bibliográfica alrededor de los siguientes temas: 1 cambios en el uso del suelo debido a la mayor producción de energía renovable; 2 impactos del uso de suelo; 3 variabilidad geográfica en el inventario de datos; y 4 efectos de la distribución de energía. Además, se revisa el grado de investigación que actualmente se aplica acerca de las tecnologías de energía renovable en campos como el eólico, el solar y la bioenergía y en la evaluación del ciclo de vida en general.

  5. Team effort leads to versatile handling solution for pipe manufacturer

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2010-09-15

    This article discussed the development of a new pipe-handling system that resulted in increased efficiencies in plant-to-yard transport for a custom steel pipe manufacturer. In the previous system, loaders would move finished pipe to the yard for storage. However, for transport loading, the pipe would have to be brought back indoors because only the inside cranes could handle loading the pipe without damaging the special outer coating on the pipe. In the new pipe-handling system, the loader is replaced with a Sennebogen 850 M rubber-tired material handler, which was developed for the steel recycling industry. The generator that comes on the material handler is retrofitted to power a purpose-built pipe-handler attachment. The machine's higher lifting reach allows for higher stacking, effectively increasing the capacity of the yard. The new pipe-handling machine allows trucks to be loaded right in the yard, eliminating the need to double-handle the pipe. 1 fig.

  6. The training for nuclear fuel handling at EDF

    International Nuclear Information System (INIS)

    Marion, J.P.

    1999-01-01

    The handling of fuel assemblies in a nuclear power plant presents 3 types of work: the taking delivery of fresh fuel, the refueling and the disposal of spent fuel. These operations are realized by teams made up of 3 handling operators and a supervisor. The refueling is made by 3*8-hour teams. These handling operations are important for the nuclear safety, a mishandling can damage the fuel cladding which is the first containment barrier, so a training center (CETIC) has been created. This center was founded in 1986 by EDF and Framatome, the purpose was to validate maintenance procedures, to test handling equipment and to train the teams which work on site. Various training programmes have been set up and a system of qualification degrees has been organized. The CETIC is fitted up with equipment that are full-sized mockups of real installations. Fuel assemblies don't react in a similar way to the different mechanical and neutronic stresses they undergo while they are in the core, they get deformed and the handling operations become more delicate. The mockup fuel assemblies are quite deformed to train the teams and prepare them to face any real situation. (A.C.)

  7. Redes de energía en la Argentina del siglo XXI. Proyectos locales innovadores

    Directory of Open Access Journals (Sweden)

    Silvina Carrizo

    2015-04-01

    Full Text Available En Argentina se construyeron de forma pionera, extensas redes de electricidad, gas y combustibles. El 98% de los hogares están conectados a la red eléctrica y el 51% de la población tiene acceso al gas natural por red (INDEC 2012. A pesar de la cobertura energética amplia, aún persisten en el país algunas regiones -como el Noroeste de la Provincia de Buenos Aires NOBAdonde las redes no llegan o tienen menor densidad. La región NOBA, situada entre las ciudades de Rosario y Buenos Aires, que cuentan con infraestructura considerable para su aprovisionamiento, presenta redes eléctricas y gasíferas poco densas -especialmente hacia el interior- y escaso desarrollo de fuentes de energías alternativas. En materia de gas, faltan gasoductos troncales o regionales. En el sistema eléctrico, hay poca capacidad de generación y se necesita mayor interconexión. Desde distintos niveles se han promovido alternativas en materia de producción, transporte y distribución de energía, pero los avances aún no alcanzan para asegurar la resiliencia energética enla región NOBA. En un contexto de esta índole, actores locales se han organizado para satisfacer sus necesidades energéticas con proyectos nuevos de transporte de gas y de aprovechamiento de recursos locales renovables, con un potencial que aún no ha sido puesto en valor. Abordando proyectos energéticos locales y regionales, este trabajo propone reflexionar acerca de la nueva geografía que podría delinearse en la producción y circulación de la energía, más flexible, fiable y sustentable, fomentando la innovación y la productividad, así como la equidad regional.

  8. Lifetime cost effectiveness of a through-school nutrition and physical programme: Project Energize.

    Science.gov (United States)

    Rush, Elaine; Obolonkin, Victor; McLennan, Stephanie; Graham, David; Harris, James D; Mernagh, Paul; Weston, Adéle R

    2014-01-01

    Project Energize, a multicomponent through-school physical activity and nutrition programme, is delivered to all primary school children in the Waikato region. The programme aim is to improve the overall health and reduce the rate of weight gain of all Waikato primary school children. An existing economic model was used to extrapolate the programme effects, initial costs, lifetime health treatment cost structures, quality-adjusted-life-years gained and increased life expectancy to the general and Māori child population of New Zealand. In March 2011, a sample of 2474 younger (7.58 ± 0.57 years, mean ± SD) and 2330 older (10.30 ± 0.51 years) children (36% Māori) attending Energize schools had body mass index measured and compared using mixed effect modelling with unEnergized comparison children from 2004 and 2006 from the same region. In 2011 the median body mass index reduction compared with the comparison younger children was -0.504 (90% CI -0.435 to -0.663) kg/m(2) and in the older children -0.551 (-0.456 to -0.789) kg/m(2). In 2010 there were 42,067 children attending Energize schools and in the same year NZ$1,891,175 was spent to deliver the programme; a cost of $44.96/child/year. Compared to the comparison children the increment in cost/quality-adjusted-life-year gained was $30,438 for the younger and $24,690 for the older children, and lower for Māori (younger $28,241, older $22,151) and for the middle socioeconomic status schools ($23,211, $17,891). Project Energize would improve quality and length of life and when compared with other obesity prevention programmes previously assessed with this model, it would be relatively cost-effective from the health treatment payer's perspective.

  9. Handling and treatment of radioactive aqueous wastes

    International Nuclear Information System (INIS)

    1992-07-01

    This report aims to provide essential guidance to developing Member States without a nuclear power programme regarding selection, design and operation of cost effective treatment processes for radioactive aqueous liquids arising as effluents from small research institutions, hospitals and industries. The restricted quantities and low activity associated with the relevant wastes will generally permit contact-handling and avoid the need for shielding requirements. The selection of liquid waste treatment involves: Characterization of arising with the possibility of segregation; Discharge requirements for decontaminated liquors, both radioactive and non-radioactive; Available technologies and costs; Conditioning of the concentrates resulting from the treatment; Storage and disposal of the conditioned concentrates. The report will serve as a technical manual providing reference material and direct step-by-step know-how to staff in radioisotope user establishments and research centres in the developing Member States without nuclear power generation. Therefore, emphasis is limited to the simpler treatment facilities, which will be included with only the robust, well-established waste management processes carefully chosen as appropriate to developing countries. 20 refs, 12 figs, 7 tabs

  10. Tritium handling experience at Atomic Energy of Canada Limited

    Energy Technology Data Exchange (ETDEWEB)

    Suppiah, S.; McCrimmon, K.; Lalonde, S.; Ryland, D.; Boniface, H.; Muirhead, C.; Castillo, I. [Atomic Energy of Canad Limited - AECL, Chalk River Laboratories, Chalk River, ON (Canada)

    2015-03-15

    Canada has been a leader in tritium handling technologies as a result of the successful CANDU reactor technology used for power production. Over the last 50 to 60 years, capabilities have been established in tritium handling and tritium management in CANDU stations, tritium removal processes for heavy and light water, tritium measurement and monitoring, and understanding the effects of tritium on the environment. This paper outlines details of tritium-related work currently being carried out at Atomic Energy of Canada Limited (AECL). It concerns the CECE (Combined Electrolysis and Catalytic Exchange) process for detritiation, tritium-compatible electrolysers, tritium permeation studies, and tritium powered batteries. It is worth noting that AECL offers a Tritium Safe-Handling Course to national and international participants, the course is a mixture of classroom sessions and hands-on practical exercises. The expertise and facilities available at AECL is ready to address technological needs of nuclear fusion and next-generation nuclear fission reactors related to tritium handling and related issues.

  11. Safety of Cargo Aircraft Handling Procedure

    Directory of Open Access Journals (Sweden)

    Daniel Hlavatý

    2017-07-01

    Full Text Available The aim of this paper is to get acquainted with the ways how to improve the safety management system during cargo aircraft handling. The first chapter is dedicated to general information about air cargo transportation. This includes the history or types of cargo aircraft handling, but also the means of handling. The second part is focused on detailed description of cargo aircraft handling, including a description of activities that are performed before and after handling. The following part of this paper covers a theoretical interpretation of safety, safety indicators and legislative provisions related to the safety of cargo aircraft handling. The fourth part of this paper analyzes the fault trees of events which might occur during handling. The factors found by this analysis are compared with safety reports of FedEx. Based on the comparison, there is a proposal on how to improve the safety management in this transportation company.

  12. Transfer Area Mechanical Handling Calculation

    International Nuclear Information System (INIS)

    Dianda, B.

    2004-01-01

    This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAX Company L.L. C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC--28-01R W12101'' (Arthur, W.J., I11 2004). This correspondence was appended by further Correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC--28-OIRW12101; TDL No. 04-024'' (BSC 2004a). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The purpose of this calculation is to establish preliminary bounding equipment envelopes and weights for the Fuel Handling Facility (FHF) transfer areas equipment. This calculation provides preliminary information only to support development of facility layouts and preliminary load calculations. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process. It is intended that this calculation is superseded as the design advances to reflect information necessary to support License Application. The design choices outlined within this calculation represent a demonstration of feasibility and may or may not be included in the completed design. This calculation provides preliminary weight, dimensional envelope, and equipment position in building for the purposes of defining interface variables. This calculation identifies and sizes major equipment and assemblies that dictate overall equipment dimensions and facility interfaces. Sizing of components is based on the selection of commercially available products, where applicable. This is not a specific recommendation for the future use of these components or their

  13. WWER NPPs fuel handling machine control system

    International Nuclear Information System (INIS)

    Mini, G.; Rossi, G.; Barabino, M.; Casalini, M.

    2001-01-01

    In order to increase the safety level of the fuel handling machine on WWER NPPs, Ansaldo Nucleare was asked to design and supply a new Control System. Two FHM Control System units have been already supplied for Temelin NPP and others supplies are in process for the Atommash company, which has in charge the supply of FHMs for NPPs located in Russia, Ukraine and China. The Fuel Handling Machine (FHM) Control System is an integrated system capable of a complete management of nuclear fuel assemblies. The computer-based system takes into account all the operational safety interlocks so that it is able to avoid incorrect and dangerous manoeuvres in the case of operator error. Control system design criteria, hardware and software architecture, and quality assurance control, are in accordance with the most recent international requirements and standards, and in particular for electromagnetic disturbance immunity demands and seismic compatibility. The hardware architecture of the control system is based on ABB INFI 90 system. The microprocessor-based ABB INFI 90 system incorporates and improves upon many of the time proven control capabilities of Bailey Network 90, validated over 14,000 installations world-wide. The control system complies all the former designed sensors and devices of the machine and markedly the angular position measurement sensors named 'selsyn' of Russian design. Nevertheless it is fully compatible with all the most recent sensors and devices currently available on the market (for ex. Multiturn absolute encoders). All control logic components were developed using standard INFI 90 Engineering Work Station, interconnecting blocks extracted from an extensive SAMA library by using a graphical approach (CAD) and allowing an easier intelligibility, more flexibility and updated and coherent documentation. The data acquisition system and the Man Machine Interface are implemented by ABB in co-operation with Ansaldo. The flexible and powerful software structure

  14. Development of spent fuel remote handling technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, B. S.; Yoon, J. S.; Hong, H. D. (and others)

    2007-02-15

    In this research, the remote handling technology was developed for the ACP application. The ACP gives a possible solution to reduce the rapidly cumulative amount of spent fuels generated from the nuclear power plants in Korea. The remote technologies developed in this work are a slitting device, a voloxidizer, a modified telescopic servo manipulator and a digital mock-up. A slitting device was developed to declad the spent fuel rod-cuts and collect the spent fuel UO{sub 2} pellets. A voloxidizer was developed to convert the spent fuel UO{sub 2} pellets obtained from the slitting process in to U{sub 3}O{sub 8} powder. Experiments were performed to test the capabilities and remote operation of the developed slitting device and voloxidizer by using simulated rod-cuts and fuel in the ACP hot cell. A telescopic servo manipulator was redesigned and manufactured improving the structure of the prototype. This servo manipulator was installed in the ACP hot cell, and the target module for maintenance of the process equipment was selected. The optimal procedures for remote operation were made through the maintenance tests by using the servo manipulator. The ACP digital mockup in a virtual environment was established to secure a reliability and safety of remote operation and maintenance. The simulation for the remote operation and maintenance was implemented and the operability was analyzed. A digital mockup about the preliminary conceptual design of an enginnering-scale ACP was established, and an analysis about a scale of facility and remote handling was accomplished. The real-time diagnostic technique was developed to detect the possible fault accidents of the slitting device. An assessment of radiation effect for various sensors was also conducted in the radiation environment.

  15. Overview of the CANDU fuel handling system for advanced fuel cycles

    International Nuclear Information System (INIS)

    Koivisto, D.J.; Brown, D.R.

    1997-01-01

    Because of its neutron economies and on-power re-fuelling capabilities the CANDU system is ideally suited for implementing advanced fuel cycles because it can be adapted to burn these alternative fuels without major changes to the reactor. The fuel handling system is adaptable to implement advanced fuel cycles with some minor changes. Each individual advanced fuel cycle imposes some new set of special requirements on the fuel handling system that is different from the requirements usually encountered in handling the traditional natural uranium fuel. These changes are minor from an overall plant point of view but will require some interesting design and operating changes to the fuel handling system. Some preliminary conceptual design has been done on the fuel handling system in support of these fuel cycles. Some fuel handling details were studies in depth for some of the advanced fuel cycles. This paper provides an overview of the concepts and design challenges. (author)

  16. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  17. Bulk handling benefits from ICT

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-11-15

    The efficiency and accuracy of bulk handling is being improved by the range of management information systems and services available today. As part of the program to extend Richards Bay Coal Terminal, Siemens is installing a manufacturing execution system which coordinates and monitors all movements of raw materials. The article also reports recent developments by AXSMarine, SunGuard Energy, Fuelworx and Railworx in providing integrated tools for tracking, managing and optimising solid/liquid fuels and rail car maintenance activities. QMASTOR Ltd. has secured a contract with Anglo Coal Australia to provide its Pit to Port.net{reg_sign} and iFuse{reg_sign} software systems across all their Australians sites, to include pit-to-product stockpile management. 2 figs.

  18. Handling and transport problems (1960)

    International Nuclear Information System (INIS)

    Pomarola, J.; Savouyaud, J.

    1960-01-01

    I. The handling and transport of radioactive wastes involves the danger of irradiation and contamination. It is indispensable: - to lay down a special set of rules governing the removal and transport of wastes within centres or from one centre to another; - to give charge of this transportation to a group containing teams of specialists. The organisation, equipment and output of these teams is being examined. II. Certain materials are particularly dangerous to transport, and for these special vehicles and fixed installations are necessary. This is the case especially for the evacuation of very active liquids. A transport vehicle is described, consisting of a trailer tractor and a recipient holding 500 litres of liquid of which the activity can reach 1000 C/l; the decanting operation, the route to be followed by the vehicle, and the precautions taken are also described. (author) [fr

  19. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  20. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  1. Data Handling and Parameter Estimation

    DEFF Research Database (Denmark)

    Sin, Gürkan; Gernaey, Krist

    2016-01-01

    ,engineers, and professionals. However, it is also expected that they will be useful both for graduate teaching as well as a stepping stone for academic researchers who wish to expand their theoretical interest in the subject. For the models selected to interpret the experimental data, this chapter uses available models from...... literature that are mostly based on the ActivatedSludge Model (ASM) framework and their appropriate extensions (Henze et al., 2000).The chapter presents an overview of the most commonly used methods in the estimation of parameters from experimental batch data, namely: (i) data handling and validation, (ii......Modelling is one of the key tools at the disposal of modern wastewater treatment professionals, researchers and engineers. It enables them to study and understand complex phenomena underlying the physical, chemical and biological performance of wastewater treatment plants at different temporal...

  2. Cuantificación del potencial energético undimotriz en las costas del Caribe colombiano

    Directory of Open Access Journals (Sweden)

    Jaime P

    2017-11-01

    Full Text Available En este documento se describen los avances en la cuantificación de la energía de las olas de la costa caribeña colombiana. La metodología utilizada servirá como punto de partida para establecer el potencial energético en Colombia para este tipo de suministro energético. En la actualidad, el potencial energético teórico estimado en las ondas de la costa cercana en la costa atlántica es de aproximadamente 1107 MW y esto fue posible con datos que se han recogido y procesado desde enero de 2014. Las ecuaciones que tienen en cuenta variables tales como: la densidad del agua de mar, la temperatura y la velocidad del viento en la zona. También muestra el progreso del diseño del sistema Near Shore para la verificación del potencial de energía de las olas que consiste en un dispositivo que transforma la energía cinética de las ondas del mar en energía potencial gravitacional que se va a usar para mover un generador de corriente alterna.

  3. Feasibility study of CANDU-9 fuel handling system

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Jeong Ki; Jo, C. H.; Kim, H. M.

    1996-12-01

    CANDU`s combination of natural uranium, heavy water and on-power refuelling is unique in its design and remarkable for reliable power production. In order to offer more output, better site utilization, shorter construction time, improved station layout, safety enhancements and better control panel layout, CANDU-9 is now under development with design improvement added to all proven CANDU advantages or applicable technologies. One of its major improvement has been applied to fuel handling system. This system is very similar to that of CANDU-3, and some parts of the system are applied to those of the existing CANDU-6 or CANDU-9. Design concepts and design requirements of fuel handling system for CANDU-9 have been identified to compare with those of the existing CANDU and the design feasibilities have been evaluated. (author). 4 tabs., 13 figs., 9 refs.

  4. Design of startup neutron detector handling mechanism instrumentation

    International Nuclear Information System (INIS)

    Upadhyay, Chandra Kant; Sivaramakrishna, M.; Nagaraj, C.P.; Madhusoodanan, K.

    2010-01-01

    In PFBR, to monitor the reactor during first fuel loading and low power operation, special provision is made in the central fuel subassembly to accommodate the neutron detectors. During fuel handling operations, these detectors need to be lifted up to facilitate plug rotation. These detectors are also need to be lifted from the core to save their life, during intermediate and high power operations. Towards this, a mobile assembly containing these detectors is made with lowering and retracting provision. To control this operation, constant speed motor, torque limiter, proximity switch, wire drawn potentiometer, magnetic reed switches are provided. To ensure a smooth and safe handling of this assembly, control logic with necessary interlocks is developed. (author)

  5. La utilización eficaz del hormigón térmico en rehabilitación energética de edifcios

    OpenAIRE

    Moraño Rodríguez, Alfonso Javier

    2016-01-01

    Como sabrá el lector, se ha establecido en España por consecuencia de la Directiva 2012/27/ UE, un Programa de Ayudas para la Rehabilitación Energética de Edificios existentes (Programa PAREER-CRECE) con el fin de incentivar y promover la realización de actuaciones de reforma que favorezcan el ahorro energético, la mejora de la eficiencia energética, el aprovechamiento de las energías renovables y la reducción de emisiones de dióxido de carbono. El Ministerio de Industria, Energía y Turismo, ...

  6. Cask system design guidance for robotic handling

    International Nuclear Information System (INIS)

    Griesmeyer, J.M.; Drotning, W.D.; Morimoto, A.K.; Bennett, P.C.

    1990-10-01

    Remote automated cask handling has the potential to reduce both the occupational exposure and the time required to process a nuclear waste transport cask at a handling facility. The ongoing Advanced Handling Technologies Project (AHTP) at Sandia National Laboratories is described. AHTP was initiated to explore the use of advanced robotic systems to perform cask handling operations at handling facilities for radioactive waste, and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof-of-concept robotic systems developed in AHTP are intended to extrapolate from currently available commercial systems to the systems that will be available by the time that a repository would be open for operation. The project investigates those cask handling operations that would be performed at a nuclear waste repository facility during cask receiving and handling. The ongoing AHTP indicates that design guidance, rather than design specification, is appropriate, since the requirements for robotic handling do not place severe restrictions on cask design but rather focus on attention to detail and design for limited dexterity. The cask system design features that facilitate robotic handling operations are discussed, and results obtained from AHTP design and operation experience are summarized. The application of these design considerations is illustrated by discussion of the robot systems and their operation on cask feature mock-ups used in the AHTP project. 11 refs., 11 figs

  7. Proyecto de vivienda energéticamente sostenible situada en Ontinyent (Valencia). Instalación fotovoltaica.

    OpenAIRE

    MOLLÁ CALABUIG, SERGIO

    2015-01-01

    [ES] Se van a diseñar las instalaciones necesarias para que una vivienda unifamiliar sea energéticamente sostenible. La única fuente de energía disponible es la solar Se calcualrán las instalaciones para dos opciones. 1. Vivienda conectada a la red eléctrica general. 2. Vivienda aislada de la red eléctrica. [ES] El objeto de este trabajo es el diseño y comparación, de las instalaciones necesarias para que una vivienda unifamiliar sea energéticamente sostenible, con la única fuen...

  8. Planeamiento estratégico del sector de las fuentes no convencionales de energía renovable en Colombia

    OpenAIRE

    Torres Wilches, Carlos Rolando; Rojas Patiño, Alejandro; Higuera Rincón, Diana Astrid; Hernández Henríquez, Jorge Daniel; Calle Forero, Jorge Alberto

    2017-01-01

    xiv, 192 h. : il. ; 30 cm. A través de los años y en el ámbito mundial, la generación de energía eléctrica por medio de fuentes no convencionales de energía como el sol, el viento, la biomasa, y la energía mareomotriz, ha estado creciendo constantemente tanto en capacidad instalada (i.e., megawatt) como en número de proyectos implementados. Parte importante de este crecimiento se debe a la mejora continua en la tecnología de producción que utilizan entre otros los paneles so...

  9. Liga de magnésio como material para bateria de alta densidade energética

    OpenAIRE

    Munhoz, Igor Polezi

    2014-01-01

    Orientador: Prof. Dr. Jorge Tomioka Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia Elétrica, 2014. No contexto energético, as mudanças climáticas e as crescentes crises energéticas aumentaram as preocupações e as pesquisas na área de acumuladores de energia, visando alcançar melhorias no cenário energético e ambiental global. Ao mesmo tempo, a sociedade tornou-se dependente do consumo de energia elétrica, sendo que falhas no fornec...

  10. Estimación del potencial de energías renovables en el estado de Sonora

    OpenAIRE

    Jorge Luis Taddei Bringas; María de los Ángeles Navarrete Hinojosa; Pablo Daniel Taddei Arriola; Rafael Cabanillas López.

    2016-01-01

    La etapa de uso de combustibles fósiles está llegando a su fin, debido principalmente a la escasez y problemas de contaminación que originan. En la actualidad existe una marcada tendencia en aprovechar las fuentes renovables de energía, por su bajo impacto ambiental y menor emisión de gases de efecto invernadero (GEI), lo cual contribuye a independizar las políticas energéticas locales de las del mercado global, basadas en la supremacía petrolera. Para obtener el mayor provecho de las energía...

  11. Automation and remote handling activities in BARC: an overview

    International Nuclear Information System (INIS)

    Badodkar, D.N.

    2016-01-01

    Division of Remote Handling and Robotics, BARC has been working on design and development of various application specific remote handling and automation systems for nuclear front-end and back-end fuel cycle technologies. Division is also engaged in preservice and in-service inspection of coolant channels for Pressurized Heavy Water Reactors in India. Design and development of Reactor Control Mechanisms for Nuclear Research and Power Reactors (PHWRs and Compact LWRs) is another important activity carried out in this division. Robotic systems for Indoor and Outdoor surveillance in and around nuclear installations have also been developed. A line scan camera based system has been developed for measuring individual PHWR fuel pellet lengths as well as stack length. An industrial robot is used for autonomous exchange of pellets to achieve desired stack length. The system can be extended for active fuel pellets also. An automation system has been conceptualized for remote handling and transfer of spent fuel bundles from storage pool directly to the chopper unit of reprocessing plant. In case of Advanced Heavy Water Reactor which uses mixed oxides of (Th-Pu) and (Th-"2"3"3U ) as fuel, automation system for front-end fuel cycle has been designed, which includes Powder processing and pressing; Pellet handling and inspection; Pin handling and inspection; and Cluster assembly and dis-assembly in shielded facilities. System demonstration through fullscale mock-up facility is nearing completion. Above talk is presented on behalf of all the officers and staff of DRHR. The talk is mainly focused on development of an automated fuel fabrication facility for mixed oxides of (Th- Pu)/(Th-"2"3"3U ) fuel pins. An overview of divisional ongoing activities in the field of remote handling and automation are also covered. (author)

  12. Judicialização da regulação e perda da qualidade do fornecimento de energia elétrica em áreas periféricas Judicialización de la regulación y la pérdida de calidad del suministro de energía eléctrica en zonas periféricas The judicialization of quality regulation and the loss of electrical power supply to peripheral areas

    Directory of Open Access Journals (Sweden)

    Maurílio de Abreu Monteiro

    2013-04-01

    Full Text Available Este estudo analisa os resultados da mudança na estrutura de regulação do serviço público de energia elétrica, implementada, no âmbito da Reforma do Estado, no final dos anos 1990. Foi comparada a qualidade do serviço de distribuição no fornecimento de energia elétrica de duas empresas que atuam no Norte do Brasil, uma pública, outra privada. A última, ao ser penalizada pela agência reguladora, recorreu, sistematicamente, à judicialização dos processos punitivos. Essa estratégia não foi observada na atuação da empresa pública. Tal possibilidade institucional decorre de as agências serem dependentes do Judiciário que opera sob lógica estruturalmente diferente da lógica gerencial. Concluiu-se que a judicialização enseja comportamentos baseados na procrastinação no âmbito do arcabouço regulatório dos serviços públicos, bloqueando a estratégia pública de regulação.Este estudio analiza los resultados de los cambios en la estructura reguladora del servicio público de energía eléctrica, implementado en el ámbito de la Reforma del Estado a finales de 1990. Se comparó a la calidad del servicio de distribución en el suministro de energía eléctrica de dos empresas que operan en el Norte de Brasil, una pública, otra privada. La última, al ser penalizada por la agencia reguladora, recurrió sistemáticamente, a la judicialización de los procesos punitivos. Esta estrategia no se observó en el desempeño de las empresas públicas. Esta posibilidad institucional transcurre de las agencias seren dependientes del Judiciario que opera bajo la lógica estructuralmente diferente de la lógica gerencial. Se concluyó que la judicialización implica en comportamientos basados en la procrastinación en el ámbito del marco regulatorio de los servicios públicos, bloqueando la estrategia pública de regulación.This study analyzes the results from a structural change in the regulation of the public electricity service

  13. Hot Laboratories and Remote Handling

    International Nuclear Information System (INIS)

    Bart, G.; Blanc, J.Y.; Duwe, R.

    2003-01-01

    The European Working Group on ' Hot Laboratories and Remote Handling' is firmly established as the major contact forum for the nuclear R and D facilities at the European scale. The yearly plenary meetings intend to: - Exchange experience on analytical methods, their implementation in hot cells, the methodologies used and their application in nuclear research; - Share experience on common infrastructure exploitation matters such as remote handling techniques, safety features, QA-certification, waste handling; - Promote normalization and co-operation, e.g., by looking at mutual complementarities; - Prospect present and future demands from the nuclear industry and to draw strategic conclusions regarding further needs. The 41. plenary meeting was held in CEA Saclay from September 22 to 24, 2003 in the premises and with the technical support of the INSTN (National Institute for Nuclear Science and Technology). The Nuclear Energy Division of CEA sponsored it. The Saclay meeting was divided in three topical oral sessions covering: - Post irradiation examination: new analysis methods and methodologies, small specimen technology, programmes and results; - Hot laboratory infrastructure: decommissioning, refurbishment, waste, safety, nuclear transports; - Prospective research on materials for future applications: innovative fuels (Generation IV, HTR, transmutation, ADS), spallation source materials, and candidate materials for fusion reactor. A poster session was opened to transport companies and laboratory suppliers. The meeting addressed in three sessions the following items: Session 1 - Post Irradiation Examinations. Out of 12 papers (including 1 poster) 7 dealt with surface and solid state micro analysis, another one with an equally complex wet chemical instrumental analytical technique, while the other four papers (including the poster) presented new concepts for digital x-ray image analysis; Session 2 - Hot laboratory infrastructure (including waste theme) which was

  14. Conceptual design of divertor cassette handling by remote handling system for JT-60SA

    International Nuclear Information System (INIS)

    Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

    2007-01-01

    The JT-60SA aims to contribute and supplement ITER toward DEMO reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is prohibited. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor modules. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor module, which is 10 degrees wide in toroidal direction and weighs 500kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor module to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the module by a pallet installed from outside the VV. (author)

  15. Conceptual design of divertor cassette handling by remote handling system of JT-60SA

    International Nuclear Information System (INIS)

    Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

    2008-01-01

    The JT-60SA aims to contribute and supplement ITER toward demonstration fusion reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is restricted. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor cassettes. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor cassette, which is 10 degrees wide in toroidal direction and weighs 500 kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor cassette to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the cassette by a pallet installed from outside the VV. (author)

  16. Energizing and depletion of neutrals by a collisional plasma

    International Nuclear Information System (INIS)

    Fruchtman, A

    2008-01-01

    Neutral depletion can significantly affect the steady state of low temperature plasmas. Recent theoretical analyses predicted previously unexpected effects of neutral depletion in both collisional and collisionless regimes. In this paper we address the effect of the energy deposited in the neutral gas by a collisional plasma. The fraction of power deposited in the neutrals is shown to be independent of the amount of power. The first case we address is of a thermalized neutral gas. It is shown that a low heat conductivity of the neutral gas is followed by a high neutral temperature that results in a high neutral depletion even if the plasma pressure is small. In the second case neutrals are accelerated through charge exchange with ions leading to what we call neutral pumping, which is equivalent to ion pumping in a collisionless plasma. Neutral depletion is found in the second case for both a closed system (no net mass flow) and an open system (a finite mass flow). A thruster that employs a collisional plasma and pumped neutrals is compared with the thruster analyzed before that employs collisionless plasma.

  17. Sequence trajectory generation for garment handling systems

    OpenAIRE

    Liu, Honghai; Lin, Hua

    2008-01-01

    This paper presents a novel generic approach to the planning strategy of garment handling systems. An assumption is proposed to separate the components of such systems into a component for intelligent gripper techniques and a component for handling planning strategies. Researchers can concentrate on one of the two components first, then merge the two problems together. An algorithm is addressed to generate the trajectory position and a clothes handling sequence of clothes partitions, which ar...

  18. Enclosure for handling high activity materials

    International Nuclear Information System (INIS)

    Jimeno de Osso, F.

    1977-01-01

    One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

  19. Enclosure for handling high activity materials abstract

    International Nuclear Information System (INIS)

    Jimeno de Osso, F.; Dominguez Rodriguez, G.; Cruz Castillo, F. de la; Rodriguez Esteban, A.

    1977-01-01

    One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With that purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. A description is given of those aspects that may be of interest to people working in this field. (author) [es

  20. Scheduling of outbound luggage handling at airports

    DEFF Research Database (Denmark)

    Barth, Torben C.; Pisinger, David

    2012-01-01

    This article considers the outbound luggage handling problem at airports. The problem is to assign handling facilities to outbound flights and decide about the handling start time. This dynamic, near real-time assignment problem is part of the daily airport operations. Quality, efficiency......). Another solution method is a decomposition approach. The problem is divided into different subproblems and solved in iterative steps. The different solution approaches are tested on real world data from Frankfurt Airport....

  1. ATA diagnostic data handling system: an overview

    International Nuclear Information System (INIS)

    Chambers, F.W.; Kallman, J.; McDonald, J.; Slominski, M.

    1984-01-01

    The functions to be performed by the ATA diagnostic data handling system are discussed. The capabilities of the present data acquisition system (System 0) are presented. The goals for the next generation acquisition system (System 1), currently under design, are discussed. Facilities on the Octopus system for data handling are reviewed. Finally, we discuss what has been learned about diagnostics and computer based data handling during the past year

  2. Enclosure for handling high activity materials

    Energy Technology Data Exchange (ETDEWEB)

    Jimeno de Osso, F

    1977-07-01

    One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

  3. Energía vital. La corriente de Relaciones

    Directory of Open Access Journals (Sweden)

    Stephen Gudeman

    2013-07-01

    Full Text Available Vital energy' is a central idea in the economies of Panama and Colombia. Known as 'strength' or 'force', and assembled from the environment, this current connects all activities in the local economies and establishes relationships, from kin to strangers. Humans compose vital energy, but its sources are limited, and it is expended in use. Its availability is a gift from God and part of the unpredictable fortune that everyone faces. This economy exhibits a contrast between a social current and a market currency. It offers a materialist perspective, provides a critique of standard economics, suggests that sharing rather than reciprocity or rational choice is the 'fundamental' economic practice, and shows how an economy may be a kind of ritual legitimated by a belief in divine power that is displayed through personal fortune.

  4. Integración energética: una incertidumbre regulatoria

    Directory of Open Access Journals (Sweden)

    María de la Cruz Bayá C.

    2006-01-01

    Full Text Available Este artículo pretende introducir en la reflexión de los elementos que están insertos hoy por hoy en la agenda de la integración energética, como uno de los baluartes más importantes para la consolidación de los procesos subregionales ya que establece, per se, la base de la nueva configuración de las relaciones interestatales a partir de la relación de oferta y demanda energética. En este sentido, los métodos utilizados en la presente investigación han sido el exegético, comparado, estudio de caso y bibliográfico, lo cual ha permitido concluir que se requiere de la generación de un marco regulatorio comunitario armonizado, vinculado a los principios de supranacionalidad y de sustentabilidad.

  5. Design and Implementation of Energized Fracture Treatment in Tight Gas Sands

    Energy Technology Data Exchange (ETDEWEB)

    Mukul Sharma; Kyle Friehauf

    2009-12-31

    Hydraulic fracturing is essential for producing gas and oil at an economic rate from low permeability sands. Most fracturing treatments use water and polymers with a gelling agent as a fracturing fluid. The water is held in the small pore spaces by capillary pressure and is not recovered when drawdown pressures are low. The un-recovered water leaves a water saturated zone around the fracture face that stops the flow of gas into the fracture. This is a particularly acute problem in low permeability formations where capillary pressures are high. Depletion (lower reservoir pressures) causes a limitation on the drawdown pressure that can be applied. A hydraulic fracturing process can be energized by the addition of a compressible, sometimes soluble, gas phase into the treatment fluid. When the well is produced, the energized fluid expands and gas comes out of solution. Energizing the fluid creates high gas saturation in the invaded zone, thereby facilitating gas flowback. A new compositional hydraulic fracturing model has been created (EFRAC). This is the first model to include changes in composition, temperature, and phase behavior of the fluid inside the fracture. An equation of state is used to evaluate the phase behavior of the fluid. These compositional effects are coupled with the fluid rheology, proppant transport, and mechanics of fracture growth to create a general model for fracture creation when energized fluids are used. In addition to the fracture propagation model, we have also introduced another new model for hydraulically fractured well productivity. This is the first and only model that takes into account both finite fracture conductivity and damage in the invaded zone in a simple analytical way. EFRAC was successfully used to simulate several fracture treatments in a gas field in South Texas. Based on production estimates, energized fluids may be required when drawdown pressures are smaller than the capillary forces in the formation. For this field

  6. D0 Central Tracking Solenoid Energization, Controls, Interlocks and Quench Protection Initial Validation Procedures

    International Nuclear Information System (INIS)

    Jaskierny, W.; Hance, R.

    1998-01-01

    This note presents the inspection and tests to be performed on the DZERO solenoid energization, controls, interlocks and quench protection system before it is energized for the first time. This test is to be performed with a 5000A jumper at the end of the bus instead of the solenoid. This system is based in DZERO room 511. A copy of this note shall be annotated, signed and dated by the person coordinating the procedure; and filed with the system maintenance records. Annotations shall include comments about any aspect of the procedure that is abnormal or unsuccessful. The following inspections and tests shall be performed by persons knowledgeable about the system. Each individual test step should be reviewed and understood before proceeding with that step.

  7. Programación por metas Energía alternativa mediante biomasa.

    Directory of Open Access Journals (Sweden)

    Guerrero Casas, Flor María

    2003-01-01

    Full Text Available En este trabajo se presenta un modelo multicriterio de localización de centrales de generación de energía eléctrica mediante biomasa. Los objetivos considerados son: (1 minimizar el coste total de la operación, (2 maximizar la producción de electricidad obtenida, (3 maximizar la distancia entre plantas, (4 maximizar la aceptación social y (5 establecer las plantas o ampliaciones en aquellos lugares donde exista una mayor predisposición por parte de las administraciones locales. Finalmente, se concluye con una aplicación práctica mediante programación por metas ponderadas para la región andaluza, considerando los residuos procedentes del olivar como fuente de energía.

  8. Distributed computing for FTU data handling

    Energy Technology Data Exchange (ETDEWEB)

    Bertocchi, A. E-mail: bertocchi@frascati.enea.it; Bracco, G.; Buceti, G.; Centioli, C.; Giovannozzi, E.; Iannone, F.; Panella, M.; Vitale, V

    2002-06-01

    The growth of data warehouse in tokamak experiment is leading fusion laboratories to provide new IT solutions in data handling. In the last three years, the Frascati Tokamak Upgrade (FTU) experimental database was migrated from IBM-mainframe to Unix distributed computing environment. The migration efforts have taken into account the following items: (1) a new data storage solution based on storage area network over fibre channel; (2) andrew file system (AFS) for wide area network file sharing; (3) 'one measure/one file' philosophy replacing 'one shot/one file' to provide a faster read/write data access; (4) more powerful services, such as AFS, CORBA and MDSplus to allow users to access FTU database from different clients, regardless their O.S.; (5) large availability of data analysis tools, from the locally developed utility SHOW to the multi-platform Matlab, interactive data language and jScope (all these tools are now able to access also the Joint European Torus data, in the framework of the remote data access activity); (6) a batch-computing cluster of Alpha/CompaqTru64 CPU based on CODINE/GRD to optimize utilization of software and hardware resources.

  9. Costa Rica: Hydroelectric utility Energía Global finances upstream reforestation

    OpenAIRE

    Energía Global (Global Energy S.A.); The National Forest Office; National Fund for Forest Financing (FONAFIFO)

    2006-01-01

    Metadata only record The goal of Energía Global is to increase both the stream flow and decrease sedimentation in the hydroelectric reservoirs. They are attempting to do this by reforestation projects as well as forest conservation. The sources of revenue for this project are from the private hydroelectric company and the government through taxes on fossil fuels. PES-1 (Payments for Environmental Services Associate Award)

  10. D0 Central Tracking Solenoid Energization, Controls, Interlocks and Quench Protection Operating Procedures

    International Nuclear Information System (INIS)

    Hance, R.

    1998-01-01

    This procedure is used when it is necessary to operate the solenoid energization, controls, interlocks and quench detection system. Note that a separate procedure exists for operating the solenoid 'cryogenic' systems. Only D0 Control Room Operators or the Project Electrical Engineer are qualified to execute these procedures or operate the solenoid system. This procedure assumes that the operator is familiar with using the Distributed Manufacturing Automation and Control Software (DMACS).

  11. Assessing energy efficiency of electric car bottom furnaces intended for thermal energization of minerals

    Science.gov (United States)

    Nizhegorodov, A. I.

    2017-01-01

    The paper deals with a new concept of electric furnaces for roasting and thermal energization of vermiculite and other minerals with vibrational transportation of a single-layer mass under constant thermal field. The paper presents performance calculation and comparative assessment of energy data for furnaces of different modifications: flame and electric furnaces with three units, furnaces with six units and ones with series-parallel connection of units, and furnaces of new concept.

  12. Investigation of Prevalence of Energizer Drugs and Supplements Consumption and Effective Factors Among Bodybuilder Men in Karaj (2011)

    OpenAIRE

    F. Shoshtarizadeh; F. Bahramian; A.A. Safari; M. Pourghaderi; H. Barati

    2013-01-01

    Background: Body builder athletes’ high attention to form of body can result in high prevalence of nutritional disorders and habit to energizer drugs consumption. With notice to abuse problems of these drugs, this research was carried out to estimate prevalence of energizer drugs and supplements consumption in Karaj body builder men in 2011. Method: In cross-sectional (description- analytical) research 780 Karaj body builder men were selected randomly. Data were collected through interv...

  13. Hot Laboratories and Remote Handling

    International Nuclear Information System (INIS)

    2007-01-01

    The Opening talk of the workshop 'Hot Laboratories and Remote Handling' was given by Marin Ciocanescu with the communication 'Overview of R and D Program in Romanian Institute for Nuclear Research'. The works of the meeting were structured into three sections addressing the following items: Session 1. Hot cell facilities: Infrastructure, Refurbishment, Decommissioning; Session 2. Waste, transport, safety and remote handling issues; Session 3. Post-Irradiation examination techniques. In the frame of Section 1 the communication 'Overview of hot cell facilities in South Africa' by Wouter Klopper, Willie van Greunen et al, was presented. In the framework of the second session there were given the following four communications: 'The irradiated elements cell at PHENIX' by Laurent Breton et al., 'Development of remote equipment for DUPIC fuel fabrication at KAERI', by Jung Won Lee et al., 'Aspects of working with manipulators and small samples in an αβγ-box, by Robert Zubler et al., and 'The GIOCONDA experience of the Joint Research Centre Ispra: analysis of the experimental assemblies finalized to their safe recovery and dismantling', by Roberto Covini. Finally, in the framework of the third section the following five communications were presented: 'PIE of a CANDU fuel element irradiated for a load following test in the INR TRIGA reactor' by Marcel Parvan et al., 'Adaptation of the pole figure measurement to the irradiated items from zirconium alloys' by Yury Goncharenko et al., 'Fuel rod profilometry with a laser scan micrometer' by Daniel Kuster et al., 'Raman spectroscopy, a new facility at LECI laboratory to investigate neutron damage in irradiated materials' by Lionel Gosmain et al., and 'Analysis of complex nuclear materials with the PSI shielded analytical instruments' by Didier Gavillet. In addition, eleven more presentations were given as posters. Their titles were: 'Presentation of CETAMA activities (CEA analytic group)' by Alain Hanssens et al. 'Analysis of

  14. Estudio regional del potencial de secado con aire natural y energía solar

    Directory of Open Access Journals (Sweden)

    Jorge Domínguez P.

    1983-09-01

    Full Text Available En este artículo se presenta y aplica una metodología de trabajo basada en la técnica de simulación matemática y desarrollada con el fin de realizar estudios sobre el potencial de secado de productos agropecuarios con aire natural y energía solar de regiones tropicales. La metodología se basa en el uso de un programa de computador e Incluye otros elementos metodológicos en relación con el manejo de la información meteorológica, el patrón de operación del ventilador, el uso de energía solar y la interpretación de los resultados con el fin de optimizar el sistema. Se reportan los resultados del estudio del potencial de secado con aire natural y energía solar de Tuluá (Valle y se proporcionan recomendaciones específicas para la implementación de sistemas de secado a bala temperatura en la Reglón.

  15. A statistical study of ion energization at 1700 km in the auroral region

    Directory of Open Access Journals (Sweden)

    M. Hamrin

    2002-12-01

    Full Text Available We present a comprehensive overview of several potentially relevant causes for the oxygen energization in the auroral region. Data from the Freja satellite near 1700 km altitude are used for an unconditional statistical investigation. The data are obtained in the Northern Hemisphere during 21 months in the declining phase of the solar cycle. The importance of various wave types for the ion energization is statistically studied. We also investigate the correlation of ion heating with precipitating protons, accelerated auroral electrons, suprathermal electron bursts, the electron density variations, Kp index and solar illumination of the nearest conjugate ionosphere. We find that sufficiently strong broad-band ELF waves, electromagnetic ion cyclotron waves, and waves around the lower hybrid frequency are foremost associated with the ion heating. However, magnetosonic waves, with a sharp, lower frequency cutoff just below the proton gyrofrequency, are not found to contribute to the ion heating. In the absence of the first three wave emissions, transversely energized ions are rare. These wave types are approximately equally efficient in heating the ions, but we find that the main source for the heating is broadband ELF waves, since they are most common in the auroral region. We have also observed that the conditions for ion heating are more favourable for smaller ratios of the spectral densities SE /SB of the broadband ELF waves at the oxygen gyrofrequency.Key words. Ionosphere (auroral ionosphere; wave propogation Magnetospheric physics (electric fields

  16. The role of fluid compression in energy conversion and particle energization during magnetic reconnection

    Science.gov (United States)

    Li, X.; Guo, F.; Li, G.; Li, H.

    2016-12-01

    Theories of particle transport and acceleration have shown that fluid compression is the leading mechanism for particle acceleration and plasma energization. However, the role of compression in particle acceleration during magnetic reconnection is unclear. We use two approaches to study this issue. First, using fully kinetic simulations, we quantitatively calculate the effect of compression in energy conversion and particle energization during magnetic reconnection for a range of plasma beta and guide field. We show that compression has an important contribution for the energy conversion between the bulk kinetic energy and the internal energy when the guide field is smaller than the reconnecting component. Based on this result, we then study the large-scale reconnection acceleration by solving the Parker's transport equation in a background reconnecting flow provided by MHD simulations. Due to the compression effect, the simulations suggest fast particle acceleration to high energies in the reconnection layer. This study clarifies the nature of particle acceleration in reconnection layer, and may be important to understand particle acceleration and plasma energization during solar flares.

  17. Ion Composition and Energization in the Earth's Inner Magnetosphere and the Effects on Ring Current Buildup

    Science.gov (United States)

    Keika, K.; Kistler, L. M.; Brandt, P. C.

    2014-12-01

    In-situ observations and modeling work have confirmed that singly-charged oxygen ions, O+, which are of Earth's ionospheric origin, are heated/accelerated up to >100 keV in the magnetosphere. The energetic O+ population makes a significant contribution to the plasma pressure in the Earth's inner magnetosphere during magnetic storms, although under quiet conditions H+ dominates the plasma pressure. The pressure enhancements, which we term energization, are caused by adiabatic heating through earthward transport of source population in the plasma sheet, local acceleration in the inner magnetosphere and near-Earth plasma sheet, and enhanced ion supply from the topside ionosphere. The key issues regarding stronger O+ energization than H+ are non-adiabatic local acceleration, responsible for increase in O+ temperature, and more significant O+ supply than H+, responsible for increase in O+ density. Although several acceleration mechanisms and O+ supply processes have been proposed, it remains an open question what mechanism(s)/process(es) play the dominant role in stronger O+ energization. In this paper we summarize important spacecraft observations including those from Van Allen Probes, introduces the proposed mechanisms/processes that generate O+-rich energetic plasma population, and outlines possible scenarios of O+ pressure abundance in the Earth's inner magnetosphere.

  18. Diagnóstico energético en el proceso de molienda de la laterita

    Directory of Open Access Journals (Sweden)

    Reynaldo Laborde-Brown

    2004-03-01

    Full Text Available El consumo específico de energía en el proceso de molienda del mineral laterítico en la empresa Comandante Ernesto Che Guevara de Moa no muestra un comportamiento estable, lo que repercute en el aumento de los costos de producción. Para determinar las causas que originan estas variaciones se realizó una investigación en la unidad de molienda, específicamente en sus dos equipos principales: el molino de bolas y el ventilador de recirculación. Los resultados arrojaron que la variabilidad observada en el consumo energético se debe, fundamentalmente, a la ausencia de estabilidad en el flujo de alimentación de los molinos. Se obtiene un modelo estadístico que permite predecir el comportamiento del consumo específico de energía en función de la productividad diaria de la sección de molienda.

  19. Ahorro energético mediante estrategias de iluminación natural optimizadas

    Directory of Open Access Journals (Sweden)

    Puigdomènech Franquesa, Joan

    1986-04-01

    Full Text Available Electrical charges in buildings and specially in those of commercial use, can be diminished by means of natural lighting strategies. Taking the climate features of our country into consideration, it is necessary to prevent the inconveniences caused by an en erg y excess in summer, so solar Controls are needed. The only practical way to achieve the suitable balance between thermal and light needs, so as to get a monthly or annual energetic balance optimization, is to operate with the computer. A programme with such characteristics is described here. Its application gives important sarings in non renouvable energy savings.Mediante estrategias de iluminación natural es posible disminuir las cargas eléctricas de los edificios y en especial los de uso comercial. Dadas las características climáticas de nuestro país es necesario prever los inconvenientes de un exceso de energía en verano, para lo cual es preciso disponer de controles solares. Encontrar el correcto equilibrio entre las necesidades térmicas y lumínicas en base a la optimización del balance energético mensual o anual es únicamente factible mediante el uso del ordenador. Un programa que responde a estas características es descrito en el presente trabajo, obteniéndose con su aplicación importantes ahorros en el consumo de energías no renovables.

  20. Fuel handling problems at KANUPP

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, I; Mazhar Hasan, S; Mugtadir, A [Karachi Nuclear Power Plant (KANUPP), Karachi (Pakistan)

    1991-04-01

    KANUPP experienced two abnormal fuel and fuel handling related problems during the year 1990. One of these had arisen due to development of end plate to end plate coupling between the two bundles at the leading end of the fuel string in channel HO2-S. The incident occurred when attempts were being made to fuel this channel. Due to pulling of sticking bundles into the acceptor fuelling machine (north) magazine, which was not designed to accommodate two bundles, a magazine rotary stop occurred. The forward motion of the charge tube was simultaneously discovered to be restricted. The incident led to stalling of fuelling machine locked on to the channel HO2, necessitating a reactor shut down. Removal of the fuelling machine was accomplished sometime later after draining of the channel. The second incident which made the fuelling of channel KO5-N temporarily inexecutable, occurred during attempts to remove its north end shield plug when this channel came up for fuelling. The incident resulted due to breaking of the lugs of the shield plug, making its withdrawal impossible. The Plant however kept operating with suspended fuelling of channel KO5, until it could no longer sustain a further increase in fuel burnup at the maximum rating position. Resolving both these problems necessitated draining of the respective channels, leaving the resident fuel uncovered for the duration of the associated operation. Due to substantial difference in the oxidation temperatures Of UO{sub 2} and Zircaloy and its influence as such on the cooling requirement, it was necessary either to determine explicitly that the respective channels did not contain defective fuel bundles or wait for time long enough to allow the decay heat to reduce to manageable proportions. This had a significant bearing on the Plant down time necessary for the rectification of the problems. This paper describes the two incidents in detail and dwells upon the measures adopted to resolve the related problems. (author)

  1. Fuel handling problems at KANUPP

    International Nuclear Information System (INIS)

    Ahmed, I.; Mazhar Hasan, S.; Mugtadir, A.

    1991-01-01

    KANUPP experienced two abnormal fuel and fuel handling related problems during the year 1990. One of these had arisen due to development of end plate to end plate coupling between the two bundles at the leading end of the fuel string in channel HO2-S. The incident occurred when attempts were being made to fuel this channel. Due to pulling of sticking bundles into the acceptor fuelling machine (north) magazine, which was not designed to accommodate two bundles, a magazine rotary stop occurred. The forward motion of the charge tube was simultaneously discovered to be restricted. The incident led to stalling of fuelling machine locked on to the channel HO2, necessitating a reactor shut down. Removal of the fuelling machine was accomplished sometime later after draining of the channel. The second incident which made the fuelling of channel KO5-N temporarily inexecutable, occurred during attempts to remove its north end shield plug when this channel came up for fuelling. The incident resulted due to breaking of the lugs of the shield plug, making its withdrawal impossible. The Plant however kept operating with suspended fuelling of channel KO5, until it could no longer sustain a further increase in fuel burnup at the maximum rating position. Resolving both these problems necessitated draining of the respective channels, leaving the resident fuel uncovered for the duration of the associated operation. Due to substantial difference in the oxidation temperatures Of UO 2 and Zircaloy and its influence as such on the cooling requirement, it was necessary either to determine explicitly that the respective channels did not contain defective fuel bundles or wait for time long enough to allow the decay heat to reduce to manageable proportions. This had a significant bearing on the Plant down time necessary for the rectification of the problems. This paper describes the two incidents in detail and dwells upon the measures adopted to resolve the related problems. (author)

  2. The Dynamics of Large-Amplitude Motion in Energized Molecules

    Energy Technology Data Exchange (ETDEWEB)

    Perry, David S. [Univ. of Akron, OH (United States). Dept. of Chemistry

    2016-05-27

    Chemical reactions involve large-amplitude nuclear motion along the reaction coordinate that serves to distinguish reactants from products. Some reactions, such as roaming reactions and reactions proceeding through a loose transition state, involve more than one large-amplitude degree of freedom. Because of the limitation of exact quantum nuclear dynamics to small systems, one must, in general, define the active degrees of freedom and separate them in some way from the other degrees of freedom. In this project, we use large-amplitude motion in bound model systems to investigate the coupling of large-amplitude degrees of freedom to other nuclear degrees of freedom. This approach allows us to use the precision and power of high-resolution molecular spectroscopy to probe the specific coupling mechanisms involved, and to apply the associated theoretical tools. In addition to slit-jet spectra at the University of Akron, the current project period has involved collaboration with Michel Herman and Nathalie Vaeck of the Université Libre de Bruxelles, and with Brant Billinghurst at the Canadian Light Source (CLS).

  3. Estudio de la energía y el medio ambiente: una propuesta didáctica computarizada

    Directory of Open Access Journals (Sweden)

    Edwin Francisco Bonza Camargo

    2009-09-01

    Full Text Available El objetivo de este proyecto es desarrollar un material educativo computarizado, MEC, para la enseñanza de la energía; contribuyendo de esta manera a solucionar una de las grandes falencias del sistema educativo colombiano: la falta de material didáctico en las aulas de las escuelas y colegios. Además, con la aplicación de este material se aporta a la creación de conciencia en la población escolar hacia un uso más racional de la energía en pro del medio ambiente. El software se diseñó con base en el manejo de lecturas, imágenes, sonidos, videos y animaciones que permiten al estudiante aprender y conceptuar con mayor facilidad sobre un tema tan importante como lo es el de los recursos energéticos renovables y no renovables, abarcando temas tan importantes como la energía solar térmica, que es una posible solución a la crisis energética que se avecina. También, resalta la importancia que tiene la búsqueda de nuevas fuentes de energía que no degraden el medio ambiente.

  4. 9 CFR 3.118 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.118 Section 3.118 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine...

  5. How to Handle Impasses in Bargaining.

    Science.gov (United States)

    Durrant, Robert E.

    Guidelines in an outline format are presented to school board members and administrators on how to handle impasses in bargaining. The following two rules are given: there sometimes may be strikes, but there always will be settlements; and on the way to settlements, there always will be impasses. Suggestions for handling impasses are listed under…

  6. Handling uncertainty through adaptiveness in planning approaches

    NARCIS (Netherlands)

    Zandvoort, M.; Vlist, van der M.J.; Brink, van den A.

    2018-01-01

    Planners and water managers seek to be adaptive to handle uncertainty through the use of planning approaches. In this paper, we study what type of adaptiveness is proposed and how this may be operationalized in planning approaches to adequately handle different uncertainties. We took a

  7. Survey of postharvest handling, preservation and processing ...

    African Journals Online (AJOL)

    Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

  8. PND fuel handling decontamination: facilities and techniques

    International Nuclear Information System (INIS)

    Pan, R.Y.

    1996-01-01

    The use of various decontamination techniques and equipment has become a critical part of Fuel Handling maintenance work at Ontario Hydro's Pickering Nuclear Division. This paper presents an overview of the set up and techniques used for decontamination in the PND Fuel Handling Maintenance Facility and the effectiveness of each. (author). 1 tab., 9 figs

  9. Handling Kids in Crisis with Care

    Science.gov (United States)

    Bushinski, Cari

    2018-01-01

    The Handle with Care program helps schools help students who experience trauma. While at the scene of an event like a domestic violence call, drug raid, or car accident, law enforcement personnel determine the names and school of any children present. They notify that child's school to "handle ___ with care" the next day, and the school…

  10. PND fuel handling decontamination: facilities and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Pan, R Y [Ontario Hydro, Toronto, ON (Canada)

    1997-12-31

    The use of various decontamination techniques and equipment has become a critical part of Fuel Handling maintenance work at Ontario Hydro`s Pickering Nuclear Division. This paper presents an overview of the set up and techniques used for decontamination in the PND Fuel Handling Maintenance Facility and the effectiveness of each. (author). 1 tab., 9 figs.

  11. Handling knowledge on osteoporosis - a qualitative study

    DEFF Research Database (Denmark)

    Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim

    2013-01-01

    Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...

  12. DDOS ATTACK DETECTION SIMULATION AND HANDLING MECHANISM

    Directory of Open Access Journals (Sweden)

    Ahmad Sanmorino

    2013-11-01

    Full Text Available In this study we discuss how to handle DDoS attack that coming from the attacker by using detection method and handling mechanism. Detection perform by comparing number of packets and number of flow. Whereas handling mechanism perform by limiting or drop the packets that detected as a DDoS attack. The study begins with simulation on real network, which aims to get the real traffic data. Then, dump traffic data obtained from the simulation used for detection method on our prototype system called DASHM (DDoS Attack Simulation and Handling Mechanism. From the result of experiment that has been conducted, the proposed method successfully detect DDoS attack and handle the incoming packet sent by attacker.

  13. MRI of meniscal bucket-handle tears

    Energy Technology Data Exchange (ETDEWEB)

    Magee, T.H.; Hinson, G.W. [Menorah Medical Center, Overland Park, KS (United States). Dept. of Radiology

    1998-09-01

    A meniscal bucket-handle tear is a tear with an attached fragment displaced from the meniscus of the knee joint. Low sensitivity of MRI for detection of bucket-handle tears (64% as compared with arthroscopy) has been reported previously. We report increased sensitivity for detecting bucket-handle tears with the use of coronal short tau inversion recovery (STIR) images. Results. By using four criteria for diagnosis of meniscal bucket-handle tears, our overall sensitivity compared with arthroscopy was 93% (28 of 30 meniscal bucket-handle tears seen at arthroscopy were detected by MRI). The meniscal fragment was well visualized in all 28 cases on coronal STIR images. The double posterior cruciate ligament sign was seen in 8 of 30 cases, the flipped meniscus was seen in 10 of 30 cases and a fragment in the intercondylar notch was seen in 18 of 30 cases. (orig.)

  14. La vulnerabilidad energética asociada a la movilidad motorizada

    Directory of Open Access Journals (Sweden)

    Ana Sanz Fernández

    2013-04-01

    Full Text Available ResumenEl concepto de vulnerabilidad energética describe la situación a la que se pueden enfrentar aquellos niveles de renta cuyo patrón de movilidad deje de ser económicamente viable por el incremento de los costes del petróleo. Teniendo en cuenta que la movilidad laboral es un gasto prioritario para evitar la exclusión social que supone la pérdida del empleo, el aumento de los gastos en esa partida presupuestaria familiar puede derivar en dos situaciones, ambas involuntarias, que serían la necesidad de destinar una mayor cantidad de recursos al transporte (pudiendo entonces aparecer privaciones en otras esferas o la obligación de cambiar los patrones de movilidad. El objetivo de esta investigación es desarrollar este concepto, ponerlo en relación con dos conceptos directamente vinculados, exclusión social vinculada al transporte y pobreza energética, y aplicar en el área metropolitana de Madrid la metodología desarrollada, detectando los de espacios urbanos energéticamente vulnerables y explicitando las relaciones de este fenómeno con la disciplina.Palabras claveVulnerabilidad energética, exclusión social vinculada al transporte, pobreza energética, pico del petróleo, área metropolitana.AbstractThe concept of energy vulnerability describes the situation that may face those income levels that have a mobility pattern which is no longer economically viable due to rising oil costs. Given that labor mobility is a priority spending to avoid social exclusion caused by job loss, increased expenses in that family budget can result in two situations, both involuntary, that would be the need for a greater amount of resources to transport (in that case, deprivation can then appear in other areas or the obligation to change mobility patterns. The objective of this research is todevelop this concept, put on two concepts directly related, transport related social exclusion and fuel poverty, and applied in the Madrid metropolitan area

  15. Investigación e impacto ambiental de los edificios. La energía

    Directory of Open Access Journals (Sweden)

    Rodríguez Aumente, Pedro A.

    2005-08-01

    Full Text Available This conference describes the main problems of energy use in face of the depleting of fosil resources, energy supply and emission of atmospheric toxic gases, green house effect gases and ozone depleting gases. The relevance of energy consumption in the environment impact is commented, as well as the key points for the posible evolution of the problem and in the appropriate technology research to cope with them In order to improve the energy and ecological efficiency of buidings. The main characteristics of present day technologies for the introduction of renewable energies in buidings are comented, dealing with their barriers for the widespread use. The most recent research on air conditioning using thermal solar energy with absorption machines is described, with application to Madrid.Se presenta la problemática actual del uso de la energía de cara al agotamiento de las fuentes fósiles, el abastecimiento y la contaminación atmosférica de gases tóxicos, de efecto invernadero y destructores de la capa de ozono. Se comenta la relevancia de la energía en el impacto ambiental de los edificios y se discuten los distintos aspectos que inciden en la posible evolución futura del problema y en la mejor estrategia de investigación tecnológica para tratar de mejorar la eficiencia energética y medioambiental de los edificios, especialmente en España. Se presentan las tecnologías actuales de introducción de las energías renovables en los edificios y se comentan sus más relevantes características, haciendo hincapié en las barreras para su difusión. Se describe la actividad más reciente de investigación en la climatización por energía solar haciendo uso de máquina de absorción, con aplicación a Madrid.

  16. Adiabatic energization in the ring current and its relation to other source and loss terms

    Science.gov (United States)

    Liemohn, M. W.; Kozyra, J. U.; Clauer, C. R.; Khazanov, G. V.; Thomsen, M. F.

    2002-04-01

    The influence of adiabatic energization and deenergization effects, caused by particle drift in radial distance, on ring current growth rates and loss lifetimes is investigated. Growth and loss rates from simulation results of four storms (5 June 1991, 15 May 1997, 19 October 1998, and 25 September 1998) are examined and compared against the y component of the solar wind electric field (Ey,sw). Energy change rates with and without the inclusion of adiabatic energy changes are considered to isolate the influence of this mechanism in governing changes of ring current strength. It is found that the influence of adiabatic drift effects on the energy change rates is very large when energization and deenergization are considered separately as gain and loss mechanisms, often about an order of magnitude larger than all other source or loss terms combined. This is true not only during storm times, when the open drift path configuration of the hot ions dominates the physics of the ring current, but also during quiet times, when the small oscillation in L of the closed trajectories creates a large source and loss of energy each drift orbit. However, the net energy change from adiabatic drift is often smaller than other source and loss processes, especially during quiet times. Energization from adiabatic drift dominates ring current growth only during portions of the main phase of storms. Furthermore, the net-adiabatic energization is often positive, because some particles are lost in the inner magnetosphere before they can adiabatically deenergize. It is shown that the inclusion of only this net-adiabatic drift effect in the total source rate or loss lifetime (depending on the sign of the net-adiabatic energization) best matches the observed source and loss values from empirical Dst predictor methods (that is, for consistency, these values should be compared between the calculation methods). While adiabatic deenergization dominates the loss timescales for all Ey,sw values

  17. Handling Procedures of Vegetable Crops

    Science.gov (United States)

    Perchonok, Michele; French, Stephen J.

    2004-01-01

    The National Aeronautics and Space Administration (NASA) is working towards future long duration manned space flights beyond low earth orbit. The duration of these missions may be as long as 2.5 years and will likely include a stay on a lunar or planetary surface. The primary goal of the Advanced Food System in these long duration exploratory missions is to provide the crew with a palatable, nutritious, and safe food system while minimizing volume, mass, and waste. Vegetable crops can provide the crew with added nutrition and variety. These crops do not require any cooking or food processing prior to consumption. The vegetable crops, unlike prepackaged foods, will provide bright colors, textures (crispy), and fresh aromas. Ten vegetable crops have been identified for possible use in long duration missions. They are lettuce, spinach, carrot, tomato, green onion, radish, bell pepper, strawberries, fresh herbs, and cabbage. Whether these crops are grown on a transit vehicle (e.g., International Space Station) or on the lunar or planetary surface, it will be necessary to determine how to safely handle the vegetables while maintaining acceptability. Since hydrogen peroxide degrades into water and oxygen and is generally recognized as safe (GRAS), hydrogen peroxide has been recommended as the sanitizer. The objective of th is research is to determine the required effective concentration of hydrogen peroxide. In addition, it will be determined whether the use of hydrogen peroxide, although a viable sanitizer, adversely affects the quality of the vegetables. Vegetables will be dipped in 1 % hydrogen peroxide, 3% hydrogen peroxide, or 5% hydrogen peroxide. Treated produce and controls will be stored in plastic bags at 5 C for up to 14 days. Sensory, color, texture, and total plate count will be measured. The effect on several vegetables including lettuce, radish, tomato and strawberries has been completed. Although each vegetable reacts to hydrogen peroxide differently, the

  18. Evolution of the Darlington NGS fuel handling computer systems

    International Nuclear Information System (INIS)

    Leung, V.; Crouse, B.

    1996-01-01

    The ability to improve the capabilities and reliability of digital control systems in nuclear power stations to meet changing plant and personnel requirements is a formidable challenge. Many of these systems have high quality assurance standards that must be met to ensure adequate nuclear safety. Also many of these systems contain obsolete hardware along with software that is not easily transported to newer technology computer equipment. Combining modern technology upgrades into a system of obsolete hardware components is not an easy task. Lastly, as users become more accustomed to using modern technology computer systems in other areas of the station (e.g. information systems), their expectations of the capabilities of the plant systems increase. This paper will present three areas of the Darlington NGS fuel handling computer system that have been or are in the process of being upgraded to current technology components within the framework of an existing fuel handling control system. (author). 3 figs

  19. Handling of final storage of unreprocessed spent nuclear fuel

    International Nuclear Information System (INIS)

    1978-01-01

    In this report the various facilities incorporated in the proposed handling chain for spent fuel from the power stations to the final repository are discribed. Thus the geological conditions which are essential for a final repository is discussed as well as the buffer and canister materials and how they contribute towards a long-term isolation of the spent fuel. Furthermore one chapter deals with leaching of the deposited fuel in the event that the canister is penetrated as well as the transport mechanisms which determine the migration of the radioactive substances through the buffer material. The dispersal processes in the geosphere and the biosphere are also described together with the transfer mechanisms to the ecological systems as well as radiation doses. Finally a summary is given of the safety analysis of the proposed method for the handling and final storage of the spent fuel. (E.R.)

  20. Remotely-operated equipment for inspection, measurement and handling

    CERN Document Server

    Bertone, C; CERN. Geneva. TS Department

    2008-01-01

    As part of the application of ALARA radiation dose reduction principles at CERN, inspection, measurement and handling interventions in controlled areas are being studied in detail. A number of activities which could be carried out as remote operations have already been identified and equipment is being developed. Example applications include visual inspection to check for ice formation on LHC components or water leaks, measurement of radiation levels before allowing personnel access, measurement of collimator or magnet alignment, visual inspection or measurements before fire service access in the event of fire, gas leak or oxygen deficiency. For these applications, a modular monorail train, TIM, has been developed with inspection and measurement wagons. In addition TIM provides traction, power and data communication for lifting and handling units such as the remote collimator exchange module and vision for other remotely operated units such as the TAN detector exchange mini-cranes. This paper describes the eq...

  1. Evolution of the Darlington NGS fuel handling computer systems

    Energy Technology Data Exchange (ETDEWEB)

    Leung, V; Crouse, B [Ontario Hydro, Bowmanville (Canada). Darlington Nuclear Generating Station

    1997-12-31

    The ability to improve the capabilities and reliability of digital control systems in nuclear power stations to meet changing plant and personnel requirements is a formidable challenge. Many of these systems have high quality assurance standards that must be met to ensure adequate nuclear safety. Also many of these systems contain obsolete hardware along with software that is not easily transported to newer technology computer equipment. Combining modern technology upgrades into a system of obsolete hardware components is not an easy task. Lastly, as users become more accustomed to using modern technology computer systems in other areas of the station (e.g. information systems), their expectations of the capabilities of the plant systems increase. This paper will present three areas of the Darlington NGS fuel handling computer system that have been or are in the process of being upgraded to current technology components within the framework of an existing fuel handling control system. (author). 3 figs.

  2. Desarrollo metodológico a partir de mosaicos urbanos para evaluar la eficiencia energética y el aprovechamiento de la energía solar en el marco de la sustentabilidad urbana

    Directory of Open Access Journals (Sweden)

    Graciela Melisa Viegas

    Full Text Available En Argentina, la producción y reciclado de los edificios ha crecido significativamente en los últimos años, correspondiendo el mayor porcentaje a los residenciales. En este sentido es indispensable desarrollar herramientas analíticas que permitan comprender y monitorear los procesos involucrados en el fenómeno de la urbanización y cuantificar sus consecuencias energético-ambientales. El presente trabajo desarrolla una metodología que estudia, a partir de una unidad representativa (mosaico urbano, la aptitud de los distintos sectores de la ciudad para el aprovechamiento energético de la radiación solar en las diferentes texturas urbanas y sus áreas de disipación térmica, determinando el potencial energético de las mismas. Para ello se desarrolla: (a la definición conceptual de "mosaico urbano", su utilidad y su definición técnica; (b la evaluación de las herramientas para el procesamiento, la modelización espacial y energética de mosaicos; y (c un ejemplo de aplicación de la metodología. Los resultados verifican el desarrollo conceptual y la factibilidad de la metodología aplicable a un caso testigo de la ciudad de La Plata, Buenos Aires, Argentina (latitud 34°55 S; longitud 57°57 O, y permiten realizar estimaciones de la potencialidad para hacer eficiente el uso de la energía y aprovechar la energía solar (se obtuvo un 44,3% de ahorro de energía en calefacción.

  3. Fuel handling machine and auxiliary systems for a fuel handling cell

    International Nuclear Information System (INIS)

    Suikki, M.

    2013-10-01

    This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

  4. Fuel handling machine and auxiliary systems for a fuel handling cell

    Energy Technology Data Exchange (ETDEWEB)

    Suikki, M. [Optimik Oy, Turku (Finland)

    2013-10-15

    This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

  5. Handling of multiassembly sealed baskets between reactor storage and a remote handling facility

    International Nuclear Information System (INIS)

    Massey, J.V.; Kessler, J.H.; McSherry, A.J.

    1989-06-01

    The storage of multiple fuel assemblies in sealed (welded) dry storage baskets is gaining increasing use to augment at-reactor fuel storage capacity. Since this increasing use will place a significant number of such baskets on reactor sites, some initial downstream planning for their future handling scenarios for retrieving multi-assembly sealed baskets (MSBs) from onsite storage and transferring and shipping the fuel (and/or the baskets) to a federally operated remote handling facility (RHF). Numerous options or at-reactor and away-from-reactor handling were investigated. Materials handling flowsheets were developed along with conceptual designs for the equipment and tools required to handle and open the MSBs. The handling options were evaluated and compared to a reference case, fuel handling sequence (i.e., fuel assemblies are taken from the fuel pool, shipped to a receiving and handling facility and placed into interim storage). The main parameters analyzed are throughout, radiation dose burden and cost. In addition to evaluating the handling of MSBs, this work also evaluated handling consolidated fuel canisters (CFCs). In summary, the handling of MSBs and CFCs in the store, ship and bury fuel cycle was found to be feasible and, under some conditions, to offer significant benefits in terms of throughput, cost and safety. 14 refs., 20 figs., 24 tabs

  6. Safeguards information handling and treatment

    International Nuclear Information System (INIS)

    Carchon, R.; Liu, J.; Ruan, D.

    2001-01-01

    Many states are currently discussing the new additional protocol (INFCIRC/540). This expanded framework is expected to establish the additional confirmation that there are no undeclared activities and facilities in that state. The information collected by the IAEA mainly comes from three different sources: information either provided by the state, collected by the IAEA, and from open sources. This information can be uncertain, incomplete, imprecise, not fully reliable, contradictory, etc. Hence, there is a need for a mathematical framework that provides a basis for handling and treatment of multidimensional information of varying quality. We use a linguistic assessment based on fuzzy set theory, as a flexible and realistic approach. The concept of a linguistic variable serves the purpose of providing a means of approximated characterization of information that may be imprecise, too complex or ill-defined, for which the traditional quantitative approach does not give an adequate answer. In the application of this linguistic assessment approach, a problem arises on how to aggregate linguistic information. Two different approaches can be followed: (1) approximation approach using the associated membership function; (2) symbolic approach acting by the direct computation on labels, where the use of membership function and the linguistic approximation is unnecessary, which makes computation simple and quick. To manipulate the linguistic information in this context, we work with aggregation operators for combining the linguistic non-weighted and weighted values by direct computation on labels, like the Min-type and Max-type weighted aggregation operators as well as the median aggregation operator. A case study on the application of these aggregation operators to the fusion of safeguards relevant information is given. The IAEA Physical Model of the nuclear fuel cycle can be taken as a systematic and comprehensive indicator system. It identifies and describes indicators of

  7. Modelo Dinámico de un Recuperador de Gases -Sales Fundidas para una Planta Termosolar Híbrida de Energías Renovables

    Directory of Open Access Journals (Sweden)

    Javier Bonilla

    2017-01-01

    Full Text Available Resumen: En este artículo se presenta un modelo dinámico para un recuperador de gases - sales fundidas incluido en una planta de demostración de una tecnología de hibridación de plantas termosolares con otras fuentes de energías renovables. Tanto el demostrador como el modelo se han desarrollado en el ámbito del proyecto HYSOL. Este trabajo describe brevemente dicho proyecto, su tecnología, demostrador y principalmente el modelo dinámico del recuperador, cuyo estado estacionario ha sido comparado con los cálculos de diseño. El artículo se completa con simulaciones dinámicas donde se estudia la convergencia del modelo, la contribución de los distintos procesos físicos a la transferencia de calor y el impacto de las condiciones ambientales a las pérdidas térmicas. Abstract: In this paper, a dynamic model of a molten salt -gas heat recovery system of a demonstrator for a hybrid renewable solar thermal power plant, developed in the scope of the HYSOL project, is presented. This work describes briefly the HYSOL project, its technology, the demonstrator and mainly the developed heat recovery system dynamic model; its steady state has been compared to the expected results from plant design calculations. This paper is completed with dynamic simulations where, the model convergence is studied, the contribution of the different heat transfer processes is analyzed, and the impact of the environment conditions to thermal losses is evaluated. Palabras clave: Almacenamiento térmico, Energía solar de concentración, Turbina de vapor, Turbina de gas, Modelica, Keywords: Thermal storage, Concentrating solar power, Steam turbine, Gas turbine, Modelica

  8. Ergonomics: safe patient handling and mobility.

    Science.gov (United States)

    Hallmark, Beth; Mechan, Patricia; Shores, Lynne

    2015-03-01

    This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. How the NWC handles software as product

    Energy Technology Data Exchange (ETDEWEB)

    Vinson, D.

    1997-11-01

    This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

  10. Handling of bulk solids theory and practice

    CERN Document Server

    Shamlou, P A

    1990-01-01

    Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

  11. Performance Evaluation and Suggestion of Upgraded Fuel Handling Equipment for Operating OPR1000

    International Nuclear Information System (INIS)

    Chang, Sang Gyoon; Hwang, Jeung Ki; Choi, Taek Sang; Na, Eun Seok; Lee, Myung Lyul; Baek, Seung Jin; Kim, Man Su; Kunik, Jack

    2011-01-01

    The purpose of this study is to evaluate the performance of upgraded FHE (Fuel Handling Equipment) for operating OPR 1000 (Optimized Power Reactor) by using data measured during the fuel reloading, and make some suggestions on enhancing the performance of the FHE. The fuel handling equipment, which serves critical processes in the refueling outage, has been upgraded to increase and improve the operational availability of the plant. The evaluation and suggestion of this study can be a beneficial tool related to the performance of the fuel handling equipment

  12. Estimativa das necessidades energéticas em pacientes com doença renal crônica

    Directory of Open Access Journals (Sweden)

    Juliana Cordeiro Dias Rodrigues

    2013-02-01

    Full Text Available Estabelecer as necessidades energéticas de pacientes com doença renal crônica é importante para que se possam tratar os distúrbios nutricionais encontrados nessa população. Segundo os guias de condutas voltados ao cuidado nutricional de pacientes com essa doença, a recomendação energética pode variar entre 30 e 40kcal/kg/dia. Contudo, trabalhos que avaliaram os componentes do gasto energético nos pacientes com doença renal crônica sugerem que as necessidades energéticas dessa população podem diferir do valor recomendado acima, a depender da condição clínica (presença de comorbidades, da modalidade de tratamento empregado e do nível de atividade física. Dessa forma, o presente trabalho tem como objetivo fazer uma revisão dos estudos sobre o gasto energético de pacientes com doença renal crônica, com o intuito de abordar as seguintes questões: (1 as atuais recomendações de energia para pacientes com doença renal crônica estão adequadas? (2 qual equação de predição poderia ser empregada para estimar as necessidades energéticas desse grupo de pacientes? Assim, esta revisão busca auxiliar o nutricionista ao estimar as necessidades energéticas de pacientes com doença renal crônica.

  13. Productividad y eficiencia energética en el proceso de molienda del mineral laterítico

    Directory of Open Access Journals (Sweden)

    Olga Angulo-Leblanch

    2000-03-01

    Full Text Available En el trabajo se realiza un análisis energético del proceso de molienda seca del mineral laterítico, considerado como el proceso de mayor consumo de energía eléctrica entre los procesos beneficiadores que se emplean en las plantas niquelíferas, ubicadas al norte de la provincia de Holguín. Son analizadas las particularidades energéticas que exhibe este proceso cuando las máquinas trabajan normalmente con la presencia de mineral y cuando se producen ausencias ocasionales de éste en el sistema, lo que trae como consecuencia el incremento notable de las potencias demandadas por los molinos y por los ventiladores de recirculación . Se analiza además, la influencia del grado de llenado con bolas del molino, sobre la productividad y la estrecha relación de esta última con la eficiencia energética del proceso. El método fundamental de análisis empleado, se basa en la obtención experimental y en las condiciones concretas de explotación, de las características energéticas de las unidades de molienda y de sus agregados, como vía directa para descubrir las reservas de energía del sistema y conocer hasta qué punto es posible mejorar su eficiencia influyendo sobre la productividad. El trabajo revela que, cuando las unidades de molienda son operadas con valores de productividades que oscilan entre un 50 y un 60% de la nominal, si son adoptadas las medidas pertinentes para lograr el aumento de la productividad, entonces esto puede reportar hasta un 55% de mejoramiento de la eficiencia energética del proceso.

  14. Conversion of the biogas from sewage to electric power; Conversao do biogas proveniente de esgoto em eletricidade

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Suani Teixeira; Velazquez, Silvia Maria Stortini Gonzalez; Martins, Osvaldo Stella; Abreu, Fernando Castro de [Universidade de Sao Paulo, , SP (Brazil). Inst. de Eletrotecnica e Energia. Centro Nacional de Referencia em Biomassa (CENBIO)]. E-mails: suani@iee.usp.br; sgvelaz@iee.usp.br; omartins@iee.usp.br; fcabreu@terra.com.br

    2006-07-01

    This article presents the ENERG-BIOG project, electric power generation by using 30 kW (ISO) microturbines with biogas generated in the process of sewage treatment of the Sewage Treatment Station (ETE) from SABESP (Basic Sanitation Company of the Sao Paulo State) in Barueri, BR. It is a pioneer project at Latin America, being jointly accomplished with Biomass Users Network of Brazil (proponent), and CENBIO - Biomass Reference National Center (executor), supported by the FINEP/CT-ENERG (financial support)

  15. Command and Data Handling Branch Internship

    Science.gov (United States)

    Billings, Rachel Mae

    2016-01-01

    Modular Integrated Stackable Layers (MISL) is a computer system designed for simple, fast, and cost effective flexible reconfiguration in space environments such as the ISS and Orion projects for various uses. Existing applications include wireless and wired communications, data acquisition and instrumentation, and camera systems, and potential applications include bus protocol converters and subsystem control. MISL is based on Texas Instruments (TI)' MSP430 16-bit ultra-low-power microcontroller device. The purpose of my project was to integrate the MISL system with a liquid crystal display (LCD) touchscreen. The LCD, manufactured by Crystalfontz and part number CFAF320240F-035T-TS, is a 320 by 240 RGB resistive color screen including an optional carrier board. The vast majority of the project was done with Altium Designer, a tool for printed circuit board (PCB) schematic capture, 3D design, and FPGA (Field Programmable Gate Array) development. The new PCB was to allow the LCD to directly stack to the rest of MISL. Research was done with datasheets for the TI microcontroller and touchscreen display in order to meet desired hardware specifications. Documentation on prior MISL projects was also utilized. The initial step was to create a schematic for the LCD, power bus, and data bus connections between components. A layout was then designed with the required physical dimensions, routed traces and vias, power and ground planes, layer stacks, and other specified design rules such as plane clearance and hole size. Multiple consultation sessions were held with Hester Yim, the technical discipline lead for the Command and Data Handling Branch, and Christy Herring, the lead PCB layout designer in the Electronic Design and Manufacturing Branch in order to ensure proper configuration. At the moment, the PCB is awaiting revision by the latter-mentioned branch. Afterwards, the board will begin to undergo the manufacturing and testing process. Throughout the internship at

  16. Power supplies for the injector synchrotron quadrupoles and sextupoles

    International Nuclear Information System (INIS)

    Fathizadeh, M.

    1995-01-01

    This light source note will describe the power supplies for the injector synchrotron quadrupole and sextupole magnets. The injector synchrotron has two families of quadrupole magnets. Each family consists of 40 quadrupole magnets connected in series. These magnets are energized by two phase-controlled, 12-pulse power supplies. Therefore, each power supply will be rated to deliver the necessary power to only 40 quadrupole magnets. The two families of sextupole magnets in the injector synchrotron each consists of 32 sextupole magnets connected in series, powered by a phase-controlled power supply. Thus, each power supply shall be capable of delivering power to only 32 sextupole magnets

  17. Management of transport and handling contracts

    CERN Document Server

    Rühl, I

    2004-01-01

    This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.

  18. Travelling cranes for heavy reactor component handling

    International Nuclear Information System (INIS)

    Champeil, M.

    1977-01-01

    Structure and operating machinery of two travelling cranes (600 t and 450 t) used in the Framatome factory for handling heavy reactor components are described. When coupled, these cranes can lift loads up to 1000 t [fr

  19. Remote handling for an ISIS target change

    International Nuclear Information System (INIS)

    Broome, T.A.; Holding, M.

    1989-01-01

    During 1987 two ISIS targets were changed. This document describes the main features of the remote handling aspects of the work. All the work has to be carried out using remote handling techniques. The radiation level measured on the surface of the reflector when the second target had been removed was about 800 mGy/h demonstrating that hands on operations on any part of the target reflector moderator assembly is not practical. The target changes were the first large scale operations in the Target Station Remote Handling Cell and a great deal was learned about both equipment and working practices. Some general principles emerged which are applicable to other active handling tasks on facilities like ISIS and these are discussed below. 8 figs

  20. Aerobot Sampling and Handling System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Honeybee Robotics proposes to: ?Derive and document the functional and technical requirements for Aerobot surface sampling and sample handling across a range of...

  1. Data handling systems and methods of wiring

    International Nuclear Information System (INIS)

    Grant, J.

    1981-01-01

    An improved data handling system, for monitoring and control of nuclear reactor operations, is described in which time delays associated with scanning are reduced and noise and fault signals in the system are resolved. (U.K.)

  2. Harvesting and handling agricultural residues for energy

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, B.M.; Summer, H.R.

    1986-05-01

    Significant progress in understanding the needs for design of agricultural residue collection and handling systems has been made but additional research is required. Recommendations are made for research to (a) integrate residue collection and handling systems into general agricultural practices through the development of multi-use equipment and total harvest systems; (b) improve methods for routine evaluation of agricultural residue resources, possibly through remote sensing and image processing; (c) analyze biomass properties to obtain detailed data relevant to engineering design and analysis; (d) evaluate long-term environmental, social, and agronomic impacts of residue collection; (e) develop improved equipment with higher capacities to reduce residue collection and handling costs, with emphasis on optimal design of complete systems including collection, transportation, processing, storage, and utilization; and (f) produce standard forms of biomass fuels or products to enhance material handling and expand biomass markets through improved reliability and automatic control of biomass conversion and other utilization systems. 118 references.

  3. Handling of disused radioactive materials in Ecuador

    International Nuclear Information System (INIS)

    Benitez, Manuel

    1999-10-01

    This paper describes the handling of disused radioactive sources. It also shows graphic information of medical and industrial equipment containing radioactive sources. This information was prepared as part of a training course on radioactive wastes. (The author)

  4. Foster parenting, human imprinting and conventional handling ...

    African Journals Online (AJOL)

    p2492989

    Foster parenting, human imprinting and conventional handling affects survival and early .... bird may subsequently direct its sexual attention to those humans on whom it was imprinted (Bubier et al., ..... The mind through chicks' eyes: memory,.

  5. Una solución al problema de la energía y de la contaminación en México

    Directory of Open Access Journals (Sweden)

    Dieter Klaus

    1975-01-01

    Full Text Available La crisis energética ha demostrado mundialmente que nuestro concepto de "energía" es insostenible. se necesitan tres unidades caloríficas provenientes del petróleo o el carbón para producir una unidad de energía eléctrica superior. Menos favorable es el aprovechamiento en la conversión del combustible en movimiento de nuestros vehículos. La obtención de energía proveniente del aceite crudo es irreversible.

  6. Avaliação do desempenho energético de um grande edifício de serviços existente

    OpenAIRE

    Garrido, Diogo Emanuel da Silva

    2013-01-01

    Nesta dissertação pretende-se caracterizar o desempenho energético de um grande edifício de serviços existente, da tipologia ensino, avaliar e identificar potenciais medidas que melhorem aquele desempenho, permitindo, em complemento, determinar a sua classificação energética no âmbito da legislação vigente. A pertinência do estudo prende-se com a avaliação do desempenho energético dos edifícios e com o estudo de medidas de melhoria que permitam incrementar a eficiência energéti...

  7. 30o inclination in handles of plastic boxes can reduce postural and muscular workload during handling

    Directory of Open Access Journals (Sweden)

    Luciana C. C. B. Silva

    2013-06-01

    Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.

  8. Regulatory process for material handling equipment

    International Nuclear Information System (INIS)

    Rajendran, S.; Agarwal, Kailash

    2017-01-01

    Atomic Energy (Factories) Rules (AEFR) 1996, Rule 35 states, 'Thorough inspection and load testing of a Crane shall be done by a Competent Person at least once every 12 months'. To adhere to this rule, BARC Safety Council constituted 'Material Handling Equipment Committee (MHEC)' under the aegis of Conventional Fire and Safety Review Committee (CFSRC) to carry out periodical inspection and certification of Material Handling Equipment (MHE), tools and tackles used in BARC Facilities at Trombay, Tarapur and Kalpakkam

  9. Stud bolt handling equipment for reactor vessel

    International Nuclear Information System (INIS)

    Bunyan, T.W.

    1989-01-01

    Reactor vessel stud bolt handling equipment includes means for transferring a stud bolt to a carrier from a parking station, or vice versa. Preferably a number of stud bolts are handled simultaneously. The transfer means may include cross arms rotatable about extendable columns, and the equipment is mounted on a mobile base for movement into and out of position. Each carrier comprises a tubular socket and an expandable sleeve to grip a stud bolt. (author)

  10. Testing of FFTF fuel handling equipment

    International Nuclear Information System (INIS)

    Coleman, D.W.; Grazzini, E.D.; Hill, L.F.

    1977-07-01

    The Fast Flux Test Facility has several manual/computer controlled fuel handling machines which are exposed to severe environments during plant operation but still must operate reliably when called upon for reactor refueling. The test programs for two such machines--the Closed Loop Ex-Vessel Machine and the In-Vessel Handling Machine--are described. The discussion centers on those areas where design corrections or equipment repairs substantiated the benefits of a test program prior to plant operation

  11. About brachytherapy for the handling of cancer

    International Nuclear Information System (INIS)

    Campos, Tarcisio P.R.; Silva, Nilton O.; Damaso, Renato S.; Costa, Helder R.; Borges, Paulo H.R.; Mendes, Bruno M.

    2000-01-01

    The technique of brachytherapy is argued in this article. The 'hardware' and 'necessary software' for the handling are summarily presented. Being the macro-dosimetry an important stage in the radiation therapy procedure, a simplified method of doses evaluation in conventional brachytherapy is presented. In an illustrative form, isodoses of a three-dimensional distribution of linear sources are drawn on a digitalized X-ray picture, exemplifying the handling of breast brachytherapy by sources of iridium

  12. Development of standard components for remote handling

    International Nuclear Information System (INIS)

    Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira

    1998-01-01

    The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)

  13. Development of standard components for remote handling

    Energy Technology Data Exchange (ETDEWEB)

    Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)

  14. Safety Training: "Manual Handling" course in September

    CERN Multimedia

    Safety Training, HSE Unit

    2016-01-01

    The next "Manual Handling" course will be given, in French, on 26 September 2016. This course is designed for anyone required to carry out manual handling of loads in the course of their work.   The main objective of this course is to adopt and apply the basic principles of physical safety and economy of effort. There are places available. If you are interested in following this course, please fill an EDH training request via our catalogue. 

  15. Perspectivas de la situación energética mundial. Las oportunidades para Colombia

    Directory of Open Access Journals (Sweden)

    Arturo Infante Villarreal

    2007-05-01

    Full Text Available Casi la cuarta parte de la energía que consume Estados Unidos proviene de petróleo importado y sólo el 6% se origina en fuentes renovables, aunque el país produce 20% de la polución ambiental mundial y tiene sólo 4% de la población total. Los biocombustibles son una fuente potencial de energía renovable para Estados Unidos, y el resto del mundo, porque tienen un balance energético y ambiental bastante favorable. Si las condiciones de precios son adecuadas para los productores de las materias primas, los biocombustibles también tienen un impacto social importante. Colombia tiene posibilidades de participar en los mercados nacionales e internacionales de los biocombustibles sustitutos, tanto de la gasolina como del diesel con etanol y biodiesel, respectivamente. La palma de aceite, la caña de azúcar y la yuca constituyen las materias primas con mayor potencial./ Almost one fourth of the energy consumed in the U.S. comes from imported oil and only 6% is produced from renewable sources despite the fact that the U.S. is responsible for 20% of the global pollution with barely 4% of the world population. Biofuels are a promising source of renewable energy for the United States and the rest of the world, with favorable energy and environmental balances. If price conditions are adequate for the basic input producers, biofuels will have an important social impact, as well. Colombia has the possibility to participate in the national and international biofuel substitution markets for gasoline and diesel with ethanol and biodiesel, respectively. Oil Palm, Sugar Cane and Yuca, are the raw materials with the best potential.

  16. Celdas combustibles: una opción para la transformación descentralizada de energía

    Directory of Open Access Journals (Sweden)

    Julio Alberto Gavilán Yodú

    2011-02-01

    Full Text Available La solución a los problemas energéticos actuales y al progresivo deterioro del medio ambiente está estrechamenterelacionada con la elección de sistemas energéticos alternativos que sean capaces de garantizar el desarrollosostenible de todos los países. La producción descentralizada de energía, fundamentada con acierto por losdefensores del denominado camino energético suave o el camino del Sol, permite la transformación de energíacon tecnologías preferentemente no contaminantes en el lugar de consumo. Con esto se reducirían de modoconsiderable las pérdidas energéticas ocasionadas por los procesos de transmisión y distribución. La celdacombustible constituye la tecnología de mayor potencial para revolucionar el panorama energético en este siglo.Como transformador electroquímico, la conversión energética máxima posible se define por la energía libre dereacción en un régimen de temperatura relativamente bajo. En este trabajo se realiza un análisis de los diferentestipos de celdas combustibles y se caracteriza el estado actual de esta tecnología. Además, se analiza el usodel hidrógeno solar en celdas combustibles.  The solution to the actual energy problems and to the progressive damage of the environment is closely relatedwith the election of alternative energy systems that it be able to guarantee the sustainable development of all thecountries. The decentralized energy production, based with success by the defenders of the one denominatedsoft energy way or Sun way, allows the energy transformation with technologies preferably not pollutants in theplace of  consumption. It would decrease in a considerable way the energy losses caused by the transmissionprocesses and distribution. The fuel cell constitutes the technology of more potential to revolutionize the energypanorama in this century. As electrochemical transformer, the possible maximum energy conversion is definedfor the free energy of reaction in a relatively

  17. Specialization and Flexibility in Port Cargo Handling

    Directory of Open Access Journals (Sweden)

    Hakkı KİŞİ

    2016-11-01

    Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

  18. Religious Serpent Handling and Community Relations.

    Science.gov (United States)

    Williamson, W Paul; Hood, Ralph W

    2015-01-01

    Christian serpent handling sects of Appalachia comprise a community that has long been mischaracterized and marginalized by the larger communities surrounding them. To explore this dynamic, this article traces the emergence of serpent handling in Appalachia and the emergence of anti-serpent-handling state laws, which eventually failed to curb the practice, as local communities gave serpent handling groups support. We present two studies to consider for improving community relations with serpent handling sects. In study 1, we present data relating the incidence of reported serpent-bite deaths with the rise of anti-serpent-handling laws and their eventual abatement, based on increasing acceptance of serpent handlers by the larger community. Study 2 presents interview data on serpent bites and death that provide explanations for these events from the cultural and religious perspective. We conclude that first-hand knowledge about serpent handlers, and other marginalized groups, helps to lessen suspicion and allows them to be seen as not much different, which are tendencies that are important for promoting inter-community harmony.

  19. Implementación multimedia sobre energía fotovoltaica

    OpenAIRE

    Álvarez Santos, Alejandro; Giménez Oró, Nèstor

    2004-01-01

    El presente proyecto consiste en un programa informático que explica qué es la energía fotovoltaica, qué componentes tecnológicos se utilizan para su obtención y qué cálculos previos son necesarios para realizar la implementación de un campo de paneles solares. La herramienta elegida para realizar el programa informático, ha sido Macromedia Flash MX, versión 6.

  20. Microprocessor-controlled tester for evaluation of the Self-Energized Credential System (SECS)

    International Nuclear Information System (INIS)

    Corlis, N.E.

    1980-03-01

    The Self-Energized Credential System (SECS) was developed for use in the Plutonium Protection System (PPS) installed at Hanford, Washington. Evaluation and development of the SECS system was enhanced by the use of a microprocessor-controlled portal tester. This tester used infrared (ir) beam sensors to provide information on the direction of travel of the credential wearer and to detect inoperative credentials. A printed record of the portal number, actual code read, time, and direction of the credential passage provided information essential to an assessment of the operability of the SECS

  1. Almacenamiento de energía mediante aire comprimido: Plantas CAES.

    OpenAIRE

    Muñoz Diez de la Cortina, Alejandro

    2015-01-01

    El presente proyecto estudia el estado del arte en cuanto a tecnología CAES se refiere, en un intento de compilación de la información disponible en distintos medios de divulgación científica e ingenieril, y haciendo una presentación de las distintas mejoras y desarrollos posibles de la tecnología así como de un acercamiento a las dos plantas ya existentes que utilizan este medio de almacenamiento de energía. El núcleo del proyecto se encuentra en el estudio de los sistemas ...

  2. La situación energética en el Pacto Andino

    OpenAIRE

    Centro de Estudios Sudamericanos

    2008-01-01

    Los países de la región han venido modernizando sus sectores energéticos y han adoptado enfoques similares en cuanto a objetivos generales como la búsqueda de la eficiencia mediante mecanismos de mercado donde ello sea posible; la tendencia al alejamiento del Estado de actividades puramente empresariales y su focalización en los temas de regulación y control; la puesta en marcha de políticas transparentes que promuevan la competencia; y la participación de inversionistas privados, etc. No obs...

  3. Coste energético del dribling en hockey sobre patines

    OpenAIRE

    Blanco, Dr. Alfonso; Balagué, Dra. Natàlia

    1997-01-01

    El objetivo del presente estudio ha sido analizar y comparar el coste energético del dribling en hockey sobre patines con respecto a la acción de patinar. Doce jugadores amateurs bien entrenados han realizado, durante cinco minutos a 11, 13 y 15 km/h, patinaje solamente y patinaje mientras driblaban la bola con el stick. En ambos casos se evaluaron directamente y compararon consumo de oxígeno, ventilación, frecuencia cardíaca y nivel de percepción subjetiva del esfuerzo. Las variables fisioló...

  4. Modeling the Energization and Eruption of Flux Ropes and Sheared Arcades

    Science.gov (United States)

    Linton, Mark G.

    2016-10-01

    Solar magnetic eruptions are dramatic sources of solar activity, and dangerous sources of space weather hazards. Observations of the solar photosphere and overlying atmosphere by the Solar Dynamics Observatory have given us new views, measurements, and modeling constraints for understanding these eruptions. This presentation will review the current state of the art in modeling the energization and eruption of sheared magnetic arcades and of magnetic flux ropes in the corona, and will review the critical role that observations play in the motivation, development, and application of these models.

  5. La Insostenibilidad energética del "Gran Dragón" : China 1985-2009

    OpenAIRE

    Ramos Martín, Jesús

    2012-01-01

    China ya no es solo la principal fábrica del mundo, con el consiguiente nivel de consumo de recursos naturales (energía y materiales) y de emisiones de contaminantes, sino que se ha convertido en uno de los principales acreedores mundiales, y como tal, en garante del crecimiento de la mayoría de las economías occidentales. La insostenibilidad del modelo de crecimiento chino, basado en una copia de los países occidentales, se hace más evidente desde la crisis de oferta de petróleo que sacudió ...

  6. Iluminación con Energía Solar Fotovoltaica para Autoservicios en Bogotá

    Directory of Open Access Journals (Sweden)

    Wilmar Giovani Santamaría

    2015-07-01

    Full Text Available Este artículo presenta un estudio técnico y económico sobre el uso de energía fotovoltaica para iluminación en dos (2 autoservicios en la ciudad de Bogotá. Se analizan diferentes aspectos a tener en cuenta, como la radiación solar mínima sobre el área considerada y los consumos en iluminación con energía convencional. Se estima que, al realizar el cambio de iluminación de bombillos fluorescentes a bombillos LED y establecer como fuente primaria las baterías previamente alimentadas con energía fotovoltaica, se reduce el consumo de energía eléctrica de manera considerable en iluminación. Con esta hipótesis, se plantean tres opciones de sistemas fotovoltaicos autónomos para cada uno de los autoservicios con todos los elementos necesarios para el mejor funcionamiento, el estudio económico de cada opción y un estimativo del ahorro energético.

  7. El papel de la energía renovable en la competitividad un bosquejo de México

    Directory of Open Access Journals (Sweden)

    Laura Leticia Laurent Martínez

    2016-03-01

    Full Text Available La relación entre la energía y el desarrollo parece incuestionable. Entre más energía y más requerimientos tecnológicos haya que poner en juego para producirla, más avanzados se consideran los países. Sin embargo, los criterios están cambiando aceleradamente, aunque sin las repercusiones esperadas por los defensores de la competitividad. En este artículo se presenta un panorama global del bienestar de los seres vivos mediante la sustitución de las energías provenientes de los fósiles y de la fisión nuclear por energía renovable (er. Se prosigue con una serie de argumentaciones sobre el papel que desempeñan las energías renovables en la competitividad sustentable en relación con la competitividad efímera. Finalizamos con una breve descripción de la posición de México en el renglón de la er, la cual ofrece un marco para una reflexión crítica de las restricciones de la sustentabilidad en México

  8. Investigation of Prevalence of Energizer Drugs and Supplements Consumption and Effective Factors Among Bodybuilder Men in Karaj (2011

    Directory of Open Access Journals (Sweden)

    F. Shoshtarizadeh

    2013-08-01

    Full Text Available Background: Body builder athletes’ high attention to form of body can result in high prevalence of nutritional disorders and habit to energizer drugs consumption. With notice to abuse problems of these drugs, this research was carried out to estimate prevalence of energizer drugs and supplements consumption in Karaj body builder men in 2011. Method: In cross-sectional (description- analytical research 780 Karaj body builder men were selected randomly. Data were collected through interview with questionnaires containing demographic questions and using information of drugs. Data were analyzed with SPSS software (Ver. 19 and κ² test with meaningful level of P<0.05. Result: Prevalence of consumption in studied sample from different types of supplements and energizer drugs was estimated 88.2%. The most consumption prevalence belonged to food supplements and vitamins group and combination of those (69.9%. About anabolic and energizer compounds and also hormonal drugs and corticosteroids, prevalence was 5.6% and 2.1% respectively and 7.7% totally. There was meaningful relation between experience times of abuse problems, place of drug and supplement supply and attention to being permissible or impermissible of those items with type of drugs or supplement (P = 0.001. Also relation between consumption of supplements and drugs with main goal in using them was meaningful (P = 0.045. Conclusion: Consumption of supplement and energizer drugs in Karaj body builder men has high prevalence.

  9. Importancia de la energía para el crecimiento económico de México

    Directory of Open Access Journals (Sweden)

    Flory A. Dieck Assad

    2014-01-01

    Full Text Available Esta investigación analiza la productividad agregada de la mano de obra y del capital en México entre los años 1993 y 2013, con el fin de identificar las variables que influyen en su comportamiento, especialmente la energía. Esto se lleva a cabo mediante una función de producción agregada que logra identificar la influencia del acervo utilizado de capital, el trabajo remunerado, los cambios tecnológicos y la energía sobre la productividad agregada real promedio de la mano de obra y el capital y, por ende, del crecimiento potencial del PIB (producto interno bruto. Asimismo, se introduce el tema de precios de la energía, identificando su impacto directo en el uso de energía y el indirecto en la productividad y el crecimiento económico. Este análisis culmina con la definición de las perspectivas de la Reforma energética a la luz de los resultados de esta investigación, vislumbrando los desafíos y retos futuros.

  10. Avaliação energética de um sistema integrado de abastecimento de água

    Directory of Open Access Journals (Sweden)

    Ana Luiza Rezende Guanais

    2017-07-01

    Full Text Available RESUMO Os encargos energéticos decorrentes do Sistema Integrado de Abastecimento de Água de Feira de Santana (SIAA-FSA foram analisados utilizando o método de avaliação do ciclo de vida. Foram identificadas, na cadeia de abastecimento de água, as etapas do sistema com maiores encargos energéticos, e propostos cenários de melhoria. Cadeias de produção dos insumos químicos, transporte dos insumos, energia elétrica e substituição dos tubos na rede para a manutenção do SIAA-FSA foram consideradas. A demanda energética acumulada do SIAA-FSA foi de 3,51 kWh.m-3 de água consumida. As etapas de captação e distribuição de água apresentaram os maiores consumos energéticos, e a eletricidade do bombeamento representou 86% da demanda energética acumulada. Os cenários propostos para o SIAA-FSA apresentaram melhorias significativas em relação ao cenário atual, com usos mais racionais de insumos químicos, eletricidade e água.

  11. Estimación del potencial de energías renovables en el estado de Sonora

    Directory of Open Access Journals (Sweden)

    Jorge Luis Taddei Bringas

    2016-06-01

    Full Text Available La etapa de uso de combustibles fósiles está llegando a su fin, debido principalmente a la escasez y problemas de contaminación que originan. En la actualidad existe una marcada tendencia en aprovechar las fuentes renovables de energía, por su bajo impacto ambiental y menor emisión de gases de efecto invernadero (GEI, lo cual contribuye a independizar las políticas energéticas locales de las del mercado global, basadas en la supremacía petrolera. Para obtener el mayor provecho de las energías renovables, es importante determinar el potencial de los distintos recursos energéticos existentes en una región. En este trabajo se presenta una relación del potencial para explotar energías renovables en el estado de Sonora, México, como un paso previo para establecer acciones y políticas que busquen su posible utilización a gran escala.

  12. Assembly and handling apparatus for the EBFA Marx generator

    International Nuclear Information System (INIS)

    Staller, G.E.; Hiett, G.E.; Hamilton, I.D.; Aker, M.F.; Daniels, G.A.

    1979-05-01

    Marx generators, a major slow-pulsed power component in Sandia Laboratories' Electron Beam Fusion Accelerator (EBFA), were assembled at a remote facility modified to utilize an assembly-line technique. Due to the size and weight of the various components, as well as the final Marx generator assembly, special handling apparatus was designed. Time and manpower constraints required that this assembly be done in parallel with the construction of the Electron Beam Fusion Facility (EBFF). The completed Marx generators were temporarily stored and then moved from the assembly building to the EBFF using special transportation racks designed specifically for this purpose

  13. Bottom ash handling: why the outlook is dry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-03-15

    The author believes that dry systems are the way forward for bottom ash handling at coal fired power plants. The first two commercial installations of Clyde Bergemann's DRYCON system, in China, are due to enter operation shortly. The DRY ash CONveyor (DRYCON) employs fresh air flow to cool the ash, returning reheat energy to the boiler. It also addresses some problems encountered with previous dry technologies whilst increasing ash capacity and enhancing ash cooking. The advantages of the DRYCON over the wet submerged scraper conveyor are listed. 7 figs.

  14. Canadian capabilities in fusion fuels technology and remote handling

    International Nuclear Information System (INIS)

    1987-10-01

    This report describes Canadian expertise in fusion fuels technology and remote handling. The Canadian Fusion Fuels Technology Project (CFFTP) was established and is funded by the Canadian government, the province of Ontario and Ontario Hydro to focus on the technology necessary to produce and manage the tritium and deuterium fuels to be used in fusion power reactors. Its activities are divided amongst three responsibility areas, namely, the development of blanket, first wall, reactor exhaust and fuel processing systems, the development of safe and reliable operating procedures for fusion facilities, and, finally, the application of these developments to specific projects such as tritium laboratories. CFFTP also hopes to utilize and adapt Canadian developments in an international sense, by, for instance, offering training courses to the international tritium community. Tritium management expertise is widely available in Canada because tritium is a byproduct of the routine operation of CANDU reactors. Expertise in remote handling is another byproduct of research and development of of CANDU facilities. In addition to describing the remote handling technology developed in Canada, this report contains a brief description of the Canadian tritium laboratories, storage beds and extraction plants as well as a discussion of tritium monitors and equipment developed in support of the CANDU reactor and fusion programs. Appendix A lists Canadian manufacturers of tritium equipment and Appendix B describes some of the projects performed by CFFTP for offshore clients

  15. A smartphone controlled handheld microfluidic liquid handling system.

    Science.gov (United States)

    Li, Baichen; Li, Lin; Guan, Allan; Dong, Quan; Ruan, Kangcheng; Hu, Ronggui; Li, Zhenyu

    2014-10-21

    Microfluidics and lab-on-a-chip technologies have made it possible to manipulate small volume liquids with unprecedented resolution, automation and integration. However, most current microfluidic systems still rely on bulky off-chip infrastructures such as compressed pressure sources, syringe pumps and computers to achieve complex liquid manipulation functions. Here, we present a handheld automated microfluidic liquid handling system controlled by a smartphone, which is enabled by combining elastomeric on-chip valves and a compact pneumatic system. As a demonstration, we show that the system can automatically perform all the liquid handling steps of a bead-based HIV1 p24 sandwich immunoassay on a multi-layer PDMS chip without any human intervention. The footprint of the system is 6 × 10.5 × 16.5 cm, and the total weight is 829 g including battery. Powered by a 12.8 V 1500 mAh Li battery, the system consumed 2.2 W on average during the immunoassay and lasted for 8.7 h. This handheld microfluidic liquid handling platform is generally applicable to many biochemical and cell-based assays requiring complex liquid manipulation and sample preparation steps such as FISH, PCR, flow cytometry and nucleic acid sequencing. In particular, the integration of this technology with read-out biosensors may help enable the realization of the long-sought Tricorder-like handheld in vitro diagnostic (IVD) systems.

  16. Handling chemotherapy drugs-Do medical gloves really protect?

    Science.gov (United States)

    Landeck, Lilla; Gonzalez, Ernesto; Koch, Olaf Manfred

    2015-10-15

    Due to their potential mutagenic, carcinogenic and teratogenic effects occupational exposure to chemotherapy drugs should be kept to a minimum. Utilization of personnel protective devices, especially the use of protective medical gloves, is a mainstay to avoid skin contact. The choice of appropriate gloves is of outstanding importance. For optimal protection in the oncology setting it is essential to establish general guidelines evaluating appropriate materials and defining quality standards. Establishing these guidelines can facilitate better handling and avoid potential hazards and late sequelae. In Europe there are no specific requirements or test methodologies for medical gloves used in the oncology environment. The implementation of uniform standards for gloves used while handling chemotherapy drugs would be desirable. In contrast, in the US medical gloves used to handle chemotherapy drugs have to fulfill requirements according to the ASTM International (American Society of Testing and Materials) standard D 6978-05. Nitrile or natural rubber latex is a preferred basic glove material, while vinyl is considered inappropriate because of its generally increased permeability. For extended exposure to chemotherapy drugs, double gloving, the use of thicker gloves and the frequent change of gloves increases their protective power. © 2014 UICC.

  17. West Valley facility spent fuel handling, storage, and shipping experience

    International Nuclear Information System (INIS)

    Bailey, W.J.

    1990-11-01

    The result of a study on handling and shipping experience with spent fuel are described in this report. The study was performed by Pacific Northwest Laboratory (PNL) and was jointly sponsored by the US Department of Energy (DOE) and the Electric Power Research Institute (EPRI). The purpose of the study was to document the experience with handling and shipping of relatively old light-water reactor (LWR) fuel that has been in pool storage at the West Valley facility, which is at the Western New York Nuclear Service Center at West Valley, New York and operated by DOE. A subject of particular interest in the study was the behavior of corrosion product deposits (i.e., crud) deposits on spent LWR fuel after long-term pool storage; some evidence of crud loosening has been observed with fuel that was stored for extended periods at the West Valley facility and at other sites. Conclusions associated with the experience to date with old spent fuel that has been stored at the West Valley facility are presented. The conclusions are drawn from these subject areas: a general overview of the West Valley experience, handling of spent fuel, storing of spent fuel, rod consolidation, shipping of spent fuel, crud loosening, and visual inspection. A list of recommendations is provided. 61 refs., 4 figs., 5 tabs

  18. TECNOLOGÍAS ASOCIADAS AL SISTEMA POWER TO GAS

    OpenAIRE

    Perez Gil, Susana; Belsue Etxeberria, Mikel

    2017-01-01

    El sistema "Power-to-Gas" (PtG) permite almacenar energía eléctrica mediante su transformación en energía química en forma de hidrógeno o metano. Estos gases pueden ser inyectados a la red de gas natural para su posterior distribución y uso. En este artículo se explican las diferentes tecnologías de las que consta el sistema PtG: la electrolisis, para la producción de hidrógeno, y la metanación, para la producción de metano.

  19. Energizing change

    International Nuclear Information System (INIS)

    El-Ashry, M.T.

    1998-01-01

    Since its creation in 1991, the Global Environment Facility (GEF) has committed over US D 725 million to nearly 200 projects in 49 nations in concrete action to combat climate changes. Its activities are implemented by the United Nations Environmental Programme, the United Nations Development Programme and the World Bank. This paper describes the GEF's work to combat climatic changes

  20. Power Quality Problems Due to Transformer Inrush Current

    OpenAIRE

    Tokić, A.; Uglešić, I.

    2017-01-01

    Transformer energization can produce a large nonsinuoidal inrush current which contains both odd and higher order harmonic components that can put transformer winding under mechanical stress. Additionally, they can cause irregular tripping of harmonic protection relays. Furthermore, in relatively weak power systems, such as is the Bosnian system, the superposition of harmonic components with system resonance frequencies may produce temporary overvoltages (TOV). Transformer wind...

  1. Energy Drinks and Food Bars: Power or Hype?

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Energy Drinks and Food Bars: Power or Hype? KidsHealth / ... nutritivas: ¿Energía o mera exageración? The Buzz on Energy Foods Energy drinks and nutrition bars often make ...

  2. Análise dos impactos energéticos e econômicos do programa brasileiro de etiquetagem energética (PBE/Inmetro em coletores solares térmicos do Brasil

    Directory of Open Access Journals (Sweden)

    João Pedro Stefano Marchesini Fonseca

    2018-01-01

    Full Text Available O presente estudo avalia os impactos energéticos e econômicos do uso de coletores solares térmicos planos fechados, típicos do setor residencial, nas diferentes regiões geográficas do Brasil, considerando as classes de eficiência energética do Programa Brasileiro de Etiquetagem Energética – PBE/INMETRO. As avaliações energéticas mostraram que todas as classes de coletores solares, de A (mais eficiente a E (menos eficiente, apresentam significativos ganhos energéticos, em substituição aos chuveiros elétricos. Foi definida uma cidade representativa para cada região geográfica do país, bem como sua temperatura média ambiente e nível de radiação mensal, o volume diário de água do banho a ser aquecida pelo sistema e o chuveiro elétrico e também a área média de painel solar para cada residência. Posteriormente, foram coletadas as informações de custos dos modelos representativos em relação as classes de eficiência energética, bem como taxa de juros e tarifas de energia elétrica e, assim, foram calculadas as frações solares anuais. As análises econômicas, utilizando a ferramenta de Benefício Anual Líquido – BAL, mostraram que nem sempre é viável o consumidor residencial utilizar equipamentos mais eficientes, classe A (com o Selo PROCEL.

  3. Preoperational checkout of the remote-handled transuranic waste handling at the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    1987-09-01

    This plan describes the preoperational checkout for handling Remote-Handled Transuranic (RH-TRU) Wastes from their receipt at the Waste Isolation Pilot Plant (WIPP) to their emplacement underground. This plan identifies the handling operations to be performed, personnel groups responsible for executing these operations, and required equipment items. In addition, this plan describes the quality assurance that will be exercised throughout the checkout, and finally, it establishes criteria by which to measure the success of the checkout. 7 refs., 5 figs

  4. Development of first full scope commercial CANDU-6 fuel handling simulator

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, W., E-mail: BCrawford@atlanticnuclear.ca [Atlantic Nuclear Services Inc., Fredericton, NB (Canada); McInerney, J. M., E-mail: JMcInerney@nbpower.com [Point Lepreau Generating Station, Maces Bay, NB (Canada); Moran, E.S.; Nice, J. W.; Sinclair, D.M.; Somerville, S.; Usalp, E.C.; Usalp, M., E-mail: EMoran@atlanticnuclear.ca, E-mail: JNice@atlanticnuclear.ca, E-mail: DSinclair@atlanticnuclear.ca, E-mail: SSomerville@atlanticnuclear.ca, E-mail: ECUsalp@atlanticnuclear.ca, E-mail: MUsalp@atlanticnuclear.ca [Atlantic Nuclear Services Inc., Fredericton, NB (Canada)

    2015-07-01

    Unique to CANDU reactors is continuous on-power refueling. In the CANDU-6 design, the fuel bundles are contained within 380 pressure tubes. Fuelling machines, one on either side of the reactor face move on a bridge and carriage system to the appointed channel and fuel under computer control. The fuelling machine is an immensely complicated mechanical device. None of the original Canadian full scope simulators incorporated the interaction of the fuel handling system. Traditionally, the final stages of Fuel Handling Operator qualification utilizes on the job training in a production environment carried out in the station main control room. For the purpose of supporting continual improvement in fuel handling training at the Third Qinshan Nuclear Plant Company (TQNPC), Atlantic Nuclear Services in a joint project with New Brunswick Power, developed the first commercial full scope CANDU-6 Fuel Handling simulator, integrated into the existing TQNPC Full Scope Simulator framework. The TQNPC Fuel Handling simulator is capable of supporting all normal on-power and off-power refuelling procedures as well as other abnormal operating conditions, which will allow training to be conducted, based on the plant specific operating procedures. This paper will discuss its development, the importance of this tool and its advantages over past training practices. (author)

  5. Development of first full scope commercial CANDU-6 fuel handling simulator

    International Nuclear Information System (INIS)

    Crawford, W.; McInerney, J. M.; Moran, E.S.; Nice, J. W.; Sinclair, D.M.; Somerville, S.; Usalp, E.C.; Usalp, M.

    2015-01-01

    Unique to CANDU reactors is continuous on-power refueling. In the CANDU-6 design, the fuel bundles are contained within 380 pressure tubes. Fuelling machines, one on either side of the reactor face move on a bridge and carriage system to the appointed channel and fuel under computer control. The fuelling machine is an immensely complicated mechanical device. None of the original Canadian full scope simulators incorporated the interaction of the fuel handling system. Traditionally, the final stages of Fuel Handling Operator qualification utilizes on the job training in a production environment carried out in the station main control room. For the purpose of supporting continual improvement in fuel handling training at the Third Qinshan Nuclear Plant Company (TQNPC), Atlantic Nuclear Services in a joint project with New Brunswick Power, developed the first commercial full scope CANDU-6 Fuel Handling simulator, integrated into the existing TQNPC Full Scope Simulator framework. The TQNPC Fuel Handling simulator is capable of supporting all normal on-power and off-power refuelling procedures as well as other abnormal operating conditions, which will allow training to be conducted, based on the plant specific operating procedures. This paper will discuss its development, the importance of this tool and its advantages over past training practices. (author)

  6. Magnet power supply for ISABELLE

    International Nuclear Information System (INIS)

    Nawrocky, R.J.; Frankel, R.F.; Thomas, M.G.

    1979-01-01

    The power supply system which will energize the superconducting magnets in the ISABELLE machine consists of some 520 computer-programmable power supplies with outputs ranging from 50 A to 4500 A. Most of the power supplies will be used for the correction of field harmonics, orbit correction and adjustment of the machine working line. During acceleration, currents in various magnet correction coils will be controlled in real time to track the main field; all power supplies must be highly stable during the stacking and storage of the beam (in some cases current regulation must be in the order of 0.001%). PS reference programs will be stored in microprocessor based function generators embedded in each power supply. Due to the large amount of stored energy in the system, the magnets must be protected during quenches. Details of the power supply and of the magnet quench protection system are described

  7. Full scale tests on remote handled FFTF fuel assembly waste handling and packaging

    International Nuclear Information System (INIS)

    Allen, C.R.; Cash, R.J.; Dawson, S.A.; Strode, J.N.

    1986-01-01

    Handling and packaging of remote handled, high activity solid waste fuel assembly hardware components from spent FFTF reactor fuel assemblies have been evaluated using full scale components. The demonstration was performed using FFTF fuel assembly components and simulated components which were handled remotely using electromechanical manipulators, shielding walls, master slave manipulators, specially designed grapples, and remote TV viewing. The testing and evaluation included handling, packaging for current and conceptual shipping containers, and the effects of volume reduction on packing efficiency and shielding requirements. Effects of waste segregation into transuranic (TRU) and non-transuranic fractions also are discussed

  8. Consideraciones para la adopción de energía nucleoeléctrica a la matriz energética del Ecuador e interconexión a Colombia y Perú

    OpenAIRE

    Amancha Proaño, Pablo Israel

    2014-01-01

    El consumo mundial de energía eléctrica ha tenido un considerable crecimiento, con mayor penetración de tecnologías fósiles, aumentando las concentraciones globales de CO2 y CH4, que exceden valores medios de los últimos milenios, lo cual provocará problemas en el clima global. Urge adoptar tecnologías sustentables en diferentes países y sectores. Ecuador, Perú y Colombia, con tasas similares de crecimiento en lo económico y energético, han visto en la hidroenergía su principal fuente de gene...

  9. La imagen electrónica de la energía. Estudio estético y funcional de las páginas webs de las compañías del sector energético

    OpenAIRE

    Álvarez Ruiz, Antón; Reyes Moreno, María Isabel

    2011-01-01

    Este artículo analiza las páginas webs de las principales compañías operantes en el sector de la energía (electricidad y gas) de los países más desarrollados. La situación actual del mercado es muy significativa. Por primera vez en la historia, las administraciones centrales de estos países han consentido liberalizar el mercado energético. Y, aunque este proceso avanza con gran lentitud, comienzan a notarse cambios que anticipan un proceso de concentración, a través de compras, fusiones y ...

  10. Análisis de alternativas tecnológicas y energéticas para el sistema metroplús bajo una evaluación integrada energía, ambiente, economía

    OpenAIRE

    Alzate, Juan M; Builes, Luis A; Rave, Claudia C.; Smith, Ricardo A.; Cadena, Ángela I.

    2008-01-01

    Con un modelo de optimización multi­periodo, basado en programación lineal, y de tipo integrado Energía­Ambiente­Economía (MARKAL­Estándar), se estimaron impactos económicos, energéticos y ambientales de cinco alternativas tecnológicas para la flota de buses que atenderá la demanda de movilidad del sistema de transporte masivo de pasajeros, de mediana capacidad, del Área Metropolitana del Valle de Aburrá (Medellín – Colombia) ­Sistema Metroplús­. Las alternativa...

  11. Study and Evaluation of Innovative Fuel Handling Systems for Sodium-Cooled Fast Reactors: Fuel Handling Route Optimization

    Directory of Open Access Journals (Sweden)

    Franck Dechelette

    2014-01-01

    Full Text Available The research for technological improvement and innovation in sodium-cooled fast reactor is a matter of concern in fuel handling systems in a view to perform a better load factor of the reactor thanks to a quicker fuelling/defueling process. An optimized fuel handling route will also limit its investment cost. In that field, CEA has engaged some innovation study either of complete FHR or on the optimization of some specific components. This paper presents the study of three SFR fuel handling route fully described and compared to a reference FHR option. In those three FHR, two use a gas corridor to transfer spent and fresh fuel assembly and the third uses two casks with a sodium pot to evacuate and load an assembly in parallel. All of them are designed for the ASTRID reactor (1500 MWth but can be extrapolated to power reactors and are compatible with the mutualisation of one FHS coupled with two reactors. These three concepts are then intercompared and evaluated with the reference FHR according to four criteria: performances, risk assessment, investment cost, and qualification time. This analysis reveals that the “mixed way” FHR presents interesting solutions mainly in terms of design simplicity and time reduction. Therefore its study will be pursued for ASTRID as an alternative option.

  12. Modelo de cooperación energética entre China y América Latina

    OpenAIRE

    Hongbo, Sun

    2014-01-01

    Las relaciones entre China y América Latina han tenido más implicaciones estratégicas en la actual transición de poder político y económico internacional, en particular, sus vínculos energéticos han sido testigos de grandes avances de cooperación entre industrias de petróleo y gas. La cooperación energética de China con América Latina se compone, en una parte nada despreciable, de cambios en curso en energía en el occidente del hemisferio. Las compañías petroleras chinas recurren a diferentes...

  13. El sub-sector de distribución de energía eléctrica en Colombia

    Directory of Open Access Journals (Sweden)

    Mauricio Martín Delvasto

    1999-07-01

    Full Text Available El sector de energía eléctrica en Colombia, ha experimentado en los últimos 18 meses una transformación total que persigue la utilización eficiente de los recursos, además de tener el control administrativo y operacional de las empresas de generación y distribución de energía con el propósito de lograr mayor cobertura nacional y aumentar considerablemente la calidad en la prestación del servicio de energía. A continuación se describen los principales elementos, incluyendo aquellos de naturaleza financiera, que originaron su transformación, así como los resultados, a corto y mediano plazo que se pretenden obtener con los procesos de privatización de un sector, sin ninguna duda, fundamental para el desarrollo de nuestro país.

  14. Stochastic Fermi Energization of Coronal Plasma during Explosive Magnetic Energy Release

    Science.gov (United States)

    Pisokas, Theophilos; Vlahos, Loukas; Isliker, Heinz; Tsiolis, Vassilis; Anastasiadis, Anastasios

    2017-02-01

    The aim of this study is to analyze the interaction of charged particles (ions and electrons) with randomly formed particle scatterers (e.g., large-scale local “magnetic fluctuations” or “coherent magnetic irregularities”) using the setup proposed initially by Fermi. These scatterers are formed by the explosive magnetic energy release and propagate with the Alfvén speed along the irregular magnetic fields. They are large-scale local fluctuations (δB/B ≈ 1) randomly distributed inside the unstable magnetic topology and will here be called Alfvénic Scatterers (AS). We constructed a 3D grid on which a small fraction of randomly chosen grid points are acting as AS. In particular, we study how a large number of test particles evolves inside a collection of AS, analyzing the evolution of their energy distribution and their escape-time distribution. We use a well-established method to estimate the transport coefficients directly from the trajectories of the particles. Using the estimated transport coefficients and solving the Fokker-Planck equation numerically, we can recover the energy distribution of the particles. We have shown that the stochastic Fermi energization of mildly relativistic and relativistic plasma can heat and accelerate the tail of the ambient particle distribution as predicted by Parker & Tidman and Ramaty. The temperature of the hot plasma and the tail of the energetic particles depend on the mean free path (λsc) of the particles between the scatterers inside the energization volume.

  15. Stochastic Fermi Energization of Coronal Plasma during Explosive Magnetic Energy Release

    Energy Technology Data Exchange (ETDEWEB)

    Pisokas, Theophilos; Vlahos, Loukas; Isliker, Heinz; Tsiolis, Vassilis [Department of Physics, Aristotle University of Thessaloniki GR-52124 Thessaloniki (Greece); Anastasiadis, Anastasios [Institute for Astronomy, Astrophysics, Space Applications and Remote Sensing, National Observatory of Athens GR-15236 Penteli (Greece)

    2017-02-01

    The aim of this study is to analyze the interaction of charged particles (ions and electrons) with randomly formed particle scatterers (e.g., large-scale local “magnetic fluctuations” or “coherent magnetic irregularities”) using the setup proposed initially by Fermi. These scatterers are formed by the explosive magnetic energy release and propagate with the Alfvén speed along the irregular magnetic fields. They are large-scale local fluctuations ( δB / B ≈ 1) randomly distributed inside the unstable magnetic topology and will here be called Alfvénic Scatterers (AS). We constructed a 3D grid on which a small fraction of randomly chosen grid points are acting as AS. In particular, we study how a large number of test particles evolves inside a collection of AS, analyzing the evolution of their energy distribution and their escape-time distribution. We use a well-established method to estimate the transport coefficients directly from the trajectories of the particles. Using the estimated transport coefficients and solving the Fokker–Planck equation numerically, we can recover the energy distribution of the particles. We have shown that the stochastic Fermi energization of mildly relativistic and relativistic plasma can heat and accelerate the tail of the ambient particle distribution as predicted by Parker and Tidman and Ramaty. The temperature of the hot plasma and the tail of the energetic particles depend on the mean free path ( λ {sub sc}) of the particles between the scatterers inside the energization volume.

  16. Diseño integrado para viviendas energéticamente eficientes en Chile: Enhebrando capacidades

    Directory of Open Access Journals (Sweden)

    Underlea Miotto Bruscato

    2011-12-01

    Full Text Available El diseño integrado es una estrategia para desarrollar proyectos de arquitectura sustentable, incorporando trabajo multidisciplinario y evaluaciones de desempeño, que ha demostrado ser un aporte relevante en la ejecución de edificios públicos de países desarrollados. Este artículo presenta la revisión de aspectos de diseño integrado para la elaboración de viviendas energéticamente eficientes en la zona sur de Chile, destinadas en particular a la reconstrucción post terremoto del 27 de Febrero del 2010. Realizando primeramente una síntesis de características de los procesos de diseño integrado, sus condiciones implícitas, participantes, etapas, recursos y resultados esperados según referencias internacionales. Luego se contrasta con la práctica regular de diseño de viviendas en Chile según la regulación vigente y entrevistas a profesionales. Posteriormente se analizan procesos de diseños de casas experimentales y conjuntos habitacionales particularmente enfocados al desempeño energético, realizando seguimientos y entrevistas para revisar aspectos significativos. Identificando algunas consideraciones y recursos relevantes aplicados en el diseño de las viviendas que permitieron el logro de mejoramientos ambientales.

  17. The contribution of inductive electric fields to particle energization in the inner magnetosphere

    Science.gov (United States)

    Ilie, R.; Toth, G.; Liemohn, M. W.; Chan, A. A.

    2017-12-01

    Assessing the relative contribution of potential versus inductive electric fields at the energization of the hot ion population in the inner magnetosphere is only possible by thorough examination of the time varying magnetic field and current systems using global modeling of the entire system. We present here a method to calculate the inductive and potential components of electric field in the entire magnetosphere region. This method is based on the Helmholtz vector decomposition of the motional electric field as calculated by the BATS-R-US model, and is subject to boundary conditions. This approach removes the need to trace independent field lines and lifts the assumption that the magnetic field lines can be treated as frozen in a stationary ionosphere. In order to quantify the relative contributions of potential and inductive electric fields at driving plasma sheet ions into the inner magnetosphere, we apply this method for the March 17th, 2013 geomagnetic storm. We present here the consequences of slow continuous changes in the geomagnetic field as well as the strong tail dipolarizations on the distortion of the near-Earth magnetic field and current systems. Our findings indicate that the inductive component of the electric field is comparable, and even higher at times than the potential component, suggesting that the electric field induced by the time varying magnetic field plays a crucial role in the overall particle energization in the inner magnetosphere.

  18. Energization of electrons in a plasma beam entering a curved magnetic field

    International Nuclear Information System (INIS)

    Brenning, N.; Lindberg, L.; Eriksson, A.

    1980-09-01

    Earlier experiments have indicated that suprathermal electrons appear when a collisionless plasma flowing along a magnetic field enters a region where the magnetic field is curved. In the present investigation newly developed methods of He-spectroscopy based on the absolute intensities of the He I 3889 A and He II 4686 A lines are utilized to study the electron temperature and to estimate the population of non-thermal electrons. The density of helium added for the diagnostic purpose is so low that the flow is not disturbed. It is found that the intrusion of the plasma into a curved or transverse field gives rise to a slight increase (15-20%) in the electron temperature and a remarkable increase in the fraction of non-thermal (>100 eV) electrons from below 1% to as much as 20-25% of the total electron population. There are also indications that the energization of electrons is particularly efficient on that side of the plasma beam which becomes polarized to a positive potential when entering the curved field. The experiments are confined to the case of weak magnetic field, i.e. only the electrons are magnetically confined. New details of the electric field and potential structure are presented and discussed. Electric field components parallel to the magnetic field are likely to energize the electrons, probably through the run-away phenomenon. (Auth.)

  19. Energía eólica en España

    Directory of Open Access Journals (Sweden)

    Cayetano Espejo Marín

    2004-01-01

    Full Text Available Desde mediados de los años noventa se ha producido en España una expansiónextraordinaria del aprovechamiento de la energía eólica para la generación de electrici-dad. La disponibilidad de zonas con potencial eólico estimable junto con las políticas deapoyo a las energías renovables, sobre todo a la eólica, han contribuido a un enormedesarrollo industrial y tecnológico de este sector. España es líder mundial, tanto enpotencia instalada, donde ocupa el tercer puesto detrás de Alemania y Estados Unidos,como en número y volumen de empresas que participan en los distintos ámbitos de laenergía eólica. En este artículo se analizan las características del sector eólico español.

  20. Melhoria da eficiência energética em sistemas motrizes industriais

    Directory of Open Access Journals (Sweden)

    Antonio Vanderley Herrero Sola

    2015-09-01

    Full Text Available A comunidade científica internacional tem considerado o uso eficiente de energia em sistemas de produção extremamente importante para o desenvolvimento sustentável. Este artigo estuda a melhoria da eficiência energética em sistemas motrizes industriais por meio de mudança tecnológica. Inicialmente é feita uma revisão de literatura para apresentar as principais ações e barreiras para a melhoria da eficiência energética em sistemas industriais de energia e também destacar o uso de uma abordagem multicritério em caso de mudança tecnológica. O artigo apresenta um estudo de caso em uma indústria com o objetivo de ordenar motores elétricos para serem substituídos utilizando o método multicritério PROMETHEE II. O estudo revela que a escolha dos critérios pode alterar a ordem de prioridade de escolha das tecnologias a serem substituídas, com impacto no desempenho das novas tecnologias. O artigo enfatiza a importância da integração de todas as áreas da empresa para que sejam atendidos os interesses da organização.