WorldWideScience

Sample records for handler inspection annually

  1. 46 CFR 167.15-10 - Application for annual inspection.

    Science.gov (United States)

    2010-10-01

    ... NAUTICAL SCHOOL SHIPS Inspections § 167.15-10 Application for annual inspection. Application in writing for the annual inspection of every nautical school ship required to be inspected by law and the... Inspection, at any local Marine Inspection Office, U.S. Coast Guard, where the nautical school ship may be...

  2. Annual radioactive waste tank inspection program -- 1993

    International Nuclear Information System (INIS)

    McNatt, F.G. Sr.

    1994-05-01

    Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1993 to evaluate these vessels, and evaluations based on data accrued by inspections made since the tanks were constructed, are the subject of this report. The 1993 inspection program revealed that the condition of the Savannah River Site waste tanks had not changed significantly from that reported in the previous annual report. No new leaksites were observed. No evidence of corrosion or materials degradation was observed in the waste tanks. However, degradation was observed on covers of the concrete encasements for the out-of-service transfer lines to Tanks 1 through 8

  3. RPII Inspection and Licensing Activities and Annual Inspection Programme for 2013

    International Nuclear Information System (INIS)

    2013-04-01

    The objective of this report is to provide an overview of inspection activities of the Radiological Protection Institute of Ireland RPII, to examine the evolution in licensee numbers and to outline the rationale in developing annual inspection programmes. All inspection activities are now carried out within the framework of a quality management system including inspection planning, the training of inspectors, the conduct of inspections as well as post inspection follow up and review. This report also provides an overview of the main features of the quality system

  4. RPII Inspection and Licensing Activities and Annual Inspection Programme for 2011

    International Nuclear Information System (INIS)

    2010-07-01

    The objective of this report is to provide an overview of inspection activities of the Radiological Protection Institute of Ireland, to examine the evolution in licensee numbers and to outline the rationale in developing annual inspection programmes. All inspection activities are now carried out within the framework of a quality management system including: inspection planning, the training of inspectors, the conduct of inspections as well as inspection follow up and review. The report also provides an overview of the main features of the quality system

  5. FAA National Aviation Safety Inspection Program. Annual Report FY90

    Science.gov (United States)

    1991-06-01

    This report was undertaken to document, analyze, and place : into national perspective the findings from the 1990 National : Aviation Safety Inspection Program (NASIP). This report is the : fifth in a series of annual reports covering the results of ...

  6. Annual radioactive waste tank inspection program: 1995

    International Nuclear Information System (INIS)

    McNatt, F.G. Sr.

    1996-01-01

    Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1995 to evaluate these vessels and evaluations based on data accrued by inspections performed since the tanks were constructed are the subject of this report

  7. Annual radioactive waste tank inspection program - 1999

    International Nuclear Information System (INIS)

    Moore, C.J.

    2000-01-01

    Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1999 to evaluate these vessels and auxiliary appurtenances along with evaluations based on data accrued by inspections performed since the tanks were constructed are the subject of this report

  8. Annual radioactive waste tank inspection program - 1992

    International Nuclear Information System (INIS)

    McNatt, F.G.

    1992-01-01

    Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1992 to evaluate these vessels and evaluations based on data accrued by inspections made since the tanks were constructed are the subject of this report

  9. Annual radioactive waste tank inspection program - 1991

    International Nuclear Information System (INIS)

    McNatt, F.G.

    1992-01-01

    Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1991 to evaluate these vessels and evaluations based on data accrued by inspections made since the tanks were constructed are the subject of this report

  10. 46 CFR 122.726 - Annual inspections.

    Science.gov (United States)

    2010-10-01

    ... emptying and cleaning of each fuel tank, and refilling it with fresh fuel. (b) Each davit, winch, fall and... inspection and repair if the expiration date has passed. (d) Each battery used in an item of lifesaving... expiration date of the battery has passed. The expiration date of the battery may be marked on the battery in...

  11. 46 CFR 185.726 - Annual inspections.

    Science.gov (United States)

    2010-10-01

    ... repairs made at least once each year, including emptying and cleaning of each fuel tank, and refilling it with fresh fuel. (b) Each davit, winch, fall and other launching appliance must be thoroughly inspected, and any necessary repairs made, at least once each year. (c) Each item of lifesaving equipment with an...

  12. RPII Inspection and Licensing Activities and Annual Inspection Programme for 2012

    International Nuclear Information System (INIS)

    2012-04-01

    The purpose of this document is to promote transparency in the activities of the RPII. It explains aspects of the internal workings of the Regulation and Information Management Division of the Institute to aid understanding of the processes and decisions of that Division which may impact on licensees and other interested parties. The objective of the report is to provide an overview of inspection activities of the RPII, to examine the evolution in licensee numbers and to outline the rationale in developing annual inspection programmes. All inspection activities are now carried out within the framework of a quality management system including; inspection planning, the training of inspectors, the conduct of inspections, as well as post inspection follow up and review. This report also provides an overview of the main features of the quality system

  13. 46 CFR 2.10-105 - Prepayment of annual vessel inspection fees.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Prepayment of annual vessel inspection fees. 2.10-105... VESSEL INSPECTIONS Fees § 2.10-105 Prepayment of annual vessel inspection fees. (a) Vessel owners may prepay the annual vessel inspection fee for any period of not less than three years, and not more than...

  14. 46 CFR 2.10-101 - Annual vessel inspection fee.

    Science.gov (United States)

    2010-10-01

    ... inspections, damage surveys, repair and modification inspections, change in vessel service inspections, permit... of international certificates. (d) Entitlement to inspection services for the current year remains... MODUs 4,695 Semi-submersible MODUs 8,050 Nautical School Vessels: Length not greater than 100 feet 835...

  15. Documentation for first annual testing and inspections of Benificial Uses Shipping System (BUSS) Cask

    International Nuclear Information System (INIS)

    Lundeen, J.E.

    1994-01-01

    The purpose of this report is to compile date generated during the first annual tests and inspections of the Benificiai Uses Shipping System (BUSS) Cask. In addition, this report will verify that the testing criteria identified in chapter 8 of the BUSS Cask Safety Analysis Report for Packaging (SARP) was met. Section 8.2 ''Maintenance and Periodic Inspection Program'' of the BUSS Cask SARP requires that the following tests and inspections be performed on an annual basis: Hydrostatic pressure test; helium leak test; dye penetrant test on the trunnions and lifting lugs; and torque test on all bolts; impact limiter inspection and weight test. The first annual inspections and testing of the BUSS Cask were completed on May 5, 1994, and met the SARP criteria

  16. Second Annual Maintenance, Inspection, and Test Report for PAS-1 Cask Certification for Shipping Payload B

    International Nuclear Information System (INIS)

    KELLY, D.J.

    2000-01-01

    The Nuclear Packaging, Inc. (NuPac), PAS-1 cask is required to undergo annual maintenance and inspections to retain certification in accordance with U.S. Department of Energy (DOE) Certificate of Compliance USA/9184B(U) (Appendix A). The packaging configuration being tested and maintained is the NuPac PAS-1 cask for Payload B. The intent of the maintenance and inspections is to ensure the packaging remains in unimpaired physical condition. Two casks, serial numbers 2162-026 and 2162-027, were maintained, inspected, and tested at the 306E Development, Fabrication, and Test Laboratory, located at the Hanford Site's 300 Area. Waste Management Federal Services, Inc. (WMFS), a subsidiary of GTS Duratek, was in charge of the maintenance and testing. Cogema Engineering Corporation (Cogema) directed the operations in the test facility. The maintenance, testing, and inspections were conducted successfully with both PAS-1 casks. The work conducted on the overpacks included weighing, gasket replacement, and plastic pipe plug and foam inspections. The work conducted on the secondary containment vessel (SCV) consisted of visual inspection of the vessel and threaded parts (i.e., fasteners), visual inspection of sealing surfaces, replacement of O-ring seals, and a helium leak test. The work conducted on the primary containment vessel (PCV) consisted of visual inspection of the vessel and threaded parts (i.e., fasteners), visual inspection of sealing surfaces, replacement of O-ring seals, dimensional inspection of the vessel bottom, a helium leak test, and dye penetrant inspection of the welds. The vermiculite material used in the cask rack assembly was replaced

  17. RPII Inspection and Licensing Activities and Annual Inspection Programme for 2014

    International Nuclear Information System (INIS)

    Fennell, S.

    2014-04-01

    The purpose of this document is to promote transparency in the activities of the Radiological Protection Institute of Ireland discussed herein. It explains aspects of the internal workings of the Regulation and Information Management Division of the RPII to aid understanding of the processes and decisions of that Division which may impact on licensees and other interested parties. Every effort has been made to ensure the accuracy and completeness of information contained herein, but the RPII does not warrant such accuracy or completeness and lists of procedures and criteria may not be exhaustive. The reader should also bear in mind that the actual inspection programme and related procedures or criteria may be altered or revised in the course of the year in response to new developments. This is a guidance and information document and, while the RPII is available to advise and assist generally with regulatory queries, the information so provided or contained in this document is of a general nature and is not intended to address the specific circumstances of any particular party. This document is not intended as a legal interpretation of the legislation that applies to the RPII or of the obligations of parties operating in spheres covered by that legislation. Parties wishing to be advised on such matters should consult their legal advisers

  18. 2016 Annual Inspection and Radiological Survey Results for the Piqua, Ohio, Decommissioned Reactor Site, July 2016

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, Brian [USDOE Office of Legacy Management, Washington, DC (United States); Miller, Michele [Navarro Research and Engineering, Oak Ridge, TN (United States)

    2016-07-01

    This report presents the findings of the annual inspection and radiological survey of the Piqua, Ohio, Decommissioned Reactor Site (site). The decommissioned nuclear power demonstration facility was inspected and surveyed on April 15, 2016. The site, located on the east bank of the Great Miami River in Piqua, Ohio, was in fair physical condition. There is no requirement for a follow-up inspection, partly because City of Piqua (City) personnel participated in a March 2016 meeting to address reoccurring safety concerns. Radiological survey results from 104 locations revealed no removable contamination. One direct beta activity reading in a floor drain on the 56-foot level (1674 disintegrations per minute [dpm]/100 square centimeters [cm2]) exceeded the minimum detectable activity (MDA). Beta activity has been detected in the past at this floor drain. The reading was well below the action level of 5000 dpm/100 cm2.

  19. Documentation for fiscal year 1995 annual BUSS cask SARP testing and inspections

    Energy Technology Data Exchange (ETDEWEB)

    Saueressig, P.T.

    1994-11-08

    The purpose of this report is to compile the data generated during the Fiscal Year (FY) 1995 annual tests and inspections performed on the Beneficial Uses Shipping System (BUSS) cask. The BUSS Cask Model R-1 is a type B shipping container used for shipment of radioactive cesium-137 and strontium-90 capsules to Waste Encapsulation and Storage Facility (WESF). The primary purpose of the BUSS Cask is to provide shielding and confinement as well as impact, puncture, and thermal protection for the capsules under both normal and accident conditions. Section 8.2 ``Maintenance and Periodic Inspection Program`` of the BUSS Cask SARP requires that the following tests and inspections be performed on an annual basis: hydrostatic pressure test; helium leak test; dye penetrant test on the trunnions and life lugs; torque test on all permanent bolts; and impact limiter inspection and weight test. In addition to compiling the generated data, this report will verify that the testing criteria identified in section 8.2 of the BUSS Cask Safety Analysis Report for Packaging (SARP) was met.

  20. Documentation for fiscal year 1995 annual BUSS cask SARP testing and inspections

    International Nuclear Information System (INIS)

    Saueressig, P.T.

    1994-01-01

    The purpose of this report is to compile the data generated during the Fiscal Year (FY) 1995 annual tests and inspections performed on the Beneficial Uses Shipping System (BUSS) cask. The BUSS Cask Model R-1 is a type B shipping container used for shipment of radioactive cesium-137 and strontium-90 capsules to Waste Encapsulation and Storage Facility (WESF). The primary purpose of the BUSS Cask is to provide shielding and confinement as well as impact, puncture, and thermal protection for the capsules under both normal and accident conditions. Section 8.2 ''Maintenance and Periodic Inspection Program'' of the BUSS Cask SARP requires that the following tests and inspections be performed on an annual basis: hydrostatic pressure test; helium leak test; dye penetrant test on the trunnions and life lugs; torque test on all permanent bolts; and impact limiter inspection and weight test. In addition to compiling the generated data, this report will verify that the testing criteria identified in section 8.2 of the BUSS Cask Safety Analysis Report for Packaging (SARP) was met

  1. Interrupt Handlers in Java

    DEFF Research Database (Denmark)

    Korsholm, Stephan; Schoeberl, Martin; Ravn, Anders Peter

    2008-01-01

    An important part of implementing device drivers is to control the interrupt facilities of the hardware platform and to program interrupt handlers. Current methods for handling interrupts in Java use a server thread waiting for the VM to signal an interrupt occurrence. It means that the interrupt...... is handled at a later time, which has some disadvantages. We present constructs that allow interrupts to be handled directly and not at a later point decided by a scheduler. A desirable feature of our approach is that we do not require a native middleware layer but can handle interrupts entirely with Java...... code. We have implemented our approach using an interpreter and a Java processor, and give an example demonstrating its use....

  2. Tonopah Test Range Post-Closure Inspection Annual Report, Tonopah Test Range, Nevada, Calendar Year 2003

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Bechtel Nevada

    2004-04-01

    This post-closure inspection report provides documentation of the semiannual inspection activities, maintenance and repair activities, and conclusions and recommendations for calendar year 2003 for eight corrective action units located on the Tonopah Test Range, Nevada.

  3. Implementing hospital quality assurance policies in Iran: balancing licensing, annual evaluation, inspections and quality management systems.

    Science.gov (United States)

    Aghaei Hashjin, Asgar; Delgoshaei, Bahram; Kringos, Dionne S; Tabibi, Seyed Jamaladin; Manouchehri, Jila; Klazinga, Niek S

    2015-01-01

    The purpose of this paper is to provide an overview of applied hospital quality assurance (QA) policies in Iran. A mixed method (quantitative data and qualitative document analysis) study was carried out between 1996 and 2010. The QA policy cycle forms a tight monitoring system to assure hospital quality by combining mandatory and voluntary methods in Iran. The licensing, annual evaluation and grading, and regulatory inspections statutorily implemented by the government as a national package to assure and improve hospital care quality, while implementing quality management systems (QMS) was voluntary for hospitals. The government's strong QA policy legislation role and support has been an important factor for successful QA implementation in Iran, though it may affected QA assessment independency and validity. Increased hospital evaluation independency and repositioning, updating standards, professional involvement and effectiveness studies could increase QA policy impact and maturity. The study highlights the current QA policy implementation cycle in Iranian hospitals. It provides a basis for further quality strategy development in Iranian hospitals and elsewhere. It also raises attention about finding the optimal balance between different QA policies, which is topical for many countries. This paper describes experiences when implementing a unique approach, combining mandatory and voluntary QA policies simultaneously in a developing country, which has invested considerably over time to improve hospital quality. The experiences with a mixed obligatory/voluntary approach and comprehensive policies in Iran may contain lessons for policy makers in developing and developed countries.

  4. 33 CFR 150.514 - What are the annual tests and inspections?

    Science.gov (United States)

    2010-07-01

    ..., the operator must: (a) Strip, clean, thoroughly inspect, and, if needed, repair each lifeboat, rescue boat, and liferaft. At that time, the operator must also empty, clean, and refill each fuel tank with fresh fuel; (b) Thoroughly inspect and, if needed, repair each davit, winch, fall, and other launching...

  5. 7 CFR 927.60 - Inspection and certification.

    Science.gov (United States)

    2010-01-01

    ... WASHINGTON Order Regulating Handling Inspection § 927.60 Inspection and certification. (a) Handlers shall ship only fresh pears inspected by the Federal-State Inspection Service or under a program developed by... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection and certification. 927.60 Section 927.60...

  6. 7 CFR 984.21 - Handler inventory.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handler inventory. 984.21 Section 984.21 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Regulating Handling Definitions § 984.21 Handler inventory. Handler inventory as of any date means all...

  7. 2013 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2014-03-01

    This report, in fulfillment of a license requirement, presents the results of long-term surveillance and maintenance activities conducted by the U.S. Department of Energy (DOE) Office of Legacy Management (LM) in 2013 at 19 uranium mill tailings disposal sites established under Title I of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978.1 These activities verified that the UMTRCA Title I disposal sites remain in compliance with license requirements. DOE operates 18 UMTRCA Title I sites under a general license granted by the U.S. Nuclear Regulatory Commission (NRC) in accordance with Title 10 Code of Federal Regulations Part 40.27 (10 CFR 40.27). As required under the general license, a long-term surveillance plan (LTSP) for each site was prepared by DOE and accepted by NRC. The Grand Junction, Colorado, Disposal Site, one of the 19 Title I sites, will not be included under the general license until the open, operating portion of the cell is closed. The open portion will be closed either when it is filled or in 2023. This site is inspected in accordance with an interim LTSP. Long-term surveillance and maintenance services for these disposal sites include inspecting and maintaining the sites; monitoring environmental media and institutional controls; conducting any necessary corrective actions; and performing administrative, records, stakeholder relations, and other regulatory stewardship functions. Annual site inspections and monitoring are conducted in accordance with site-specific LTSPs and procedures established by DOE to comply with license requirements. Each site inspection is performed to verify the integrity of visible features at the site; to identify changes or new conditions that may affect the long-term performance of the site; and to determine the need, if any, for maintenance, follow-up or contingency inspections, or corrective action in accordance with the LTSP. LTSPs and site compliance reports are available on the Internet at http://www.lm.doe.gov/.

  8. Inspection Methods for Physical Protection Project: annual report, March-December 1981

    International Nuclear Information System (INIS)

    Bowden, D.D.; Green, J.N.; Minichino, C.; Thatcher, R.M.; Tyler, G.C.

    1982-01-01

    The report details the current production status of the expanded replacement inspection procedures for physical protection of power reactors, for strategic special nuclear material fixed sites, and for transportation of special nuclear material. In addition to the expanded replacement procedures, the final production status is reported for the new series of inspection procedures for special nuclear material of moderate and low strategic significance at fixed sites, for personnel training and qualifications plan (Appendix B to 10 CFR 73), for safeguards contingency plan (Appendix C to 10 CFR 73), and for licensee implementing procedures evaluation. Other deliverables, trips, management meetings, training, and changes in personnel are discussed

  9. 2013 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites

    International Nuclear Information System (INIS)

    2013-01-01

    This report, in fulfillment of a license requirement, presents the results of long-term surveillance and maintenance activities conducted by the U.S. Department of Energy (DOE) Office of Legacy Management in 2013 at six uranium mill tailings disposal sites reclaimed under Title II of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978. These activities verified that the UMTRCA Title II disposal sites remain in compliance with license requirements. DOE manages six UMTRCA Title II disposal sites under a general license granted by the U.S. Nuclear Regulatory Commission (NRC) established at Title 10 Code of Federal Regulations Part 40.28. Reclamation and site transition activities continue at other sites, and DOE ultimately expects to manage approximately 27 Title II disposal sites. Long-term surveillance and maintenance activities and services for these disposal sites include inspecting and maintaining the sites; monitoring environmental media and institutional controls; conducting any necessary corrective action; and performing administrative, records, stakeholder services, and other regulatory functions. Annual site inspections and monitoring are conducted in accordance with site-specific long-term surveillance plans (LTSPs) and procedures established by DOE to comply with license requirements. Each site inspection is performed to verify the integrity of visible features at the site; to identify changes or new conditions that may affect the long-term performance of the site; and to determine the need, if any, for maintenance, follow-up inspections, or corrective action. LTSPs and site compliance reports are available online at http://www.lm.doe.gov

  10. 2013 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-11-01

    This report, in fulfillment of a license requirement, presents the results of long-term surveillance and maintenance activities conducted by the U.S. Department of Energy (DOE) Office of Legacy Management in 2013 at six uranium mill tailings disposal sites reclaimed under Title II of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978. These activities verified that the UMTRCA Title II disposal sites remain in compliance with license requirements. DOE manages six UMTRCA Title II disposal sites under a general license granted by the U.S. Nuclear Regulatory Commission (NRC) established at Title 10 Code of Federal Regulations Part 40.28. Reclamation and site transition activities continue at other sites, and DOE ultimately expects to manage approximately 27 Title II disposal sites. Long-term surveillance and maintenance activities and services for these disposal sites include inspecting and maintaining the sites; monitoring environmental media and institutional controls; conducting any necessary corrective action; and performing administrative, records, stakeholder services, and other regulatory functions. Annual site inspections and monitoring are conducted in accordance with site-specific long-term surveillance plans (LTSPs) and procedures established by DOE to comply with license requirements. Each site inspection is performed to verify the integrity of visible features at the site; to identify changes or new conditions that may affect the long-term performance of the site; and to determine the need, if any, for maintenance, follow-up inspections, or corrective action. LTSPs and site compliance reports are available online at http://www.lm.doe.gov

  11. Adult Fishway Inspections on the Columbia and Snake Rivers, 1984-1985 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Basham, Larry R. (Columbia Basin Fish and Wildlife Authority, Water Budget Center, Portland, OR)

    1985-06-28

    Mainstream projects which have adult fish passage facilities are inspected by project operators, fishway attendants, and state and federal fishery agencies. The overall movement of upstream migrants in 1984 appeared to be satisfactory with few delays. Special efforts were made by fishery agencies and Corps personnel to check on potential problems which appeared to exist at The Dalles and John Day Dams this year. However, adult passage facilities were operating ''in criteria'' and fish may have been delayed by temperature or other factors. Inspections were generally made once a month. Some projects were operating at less than full criteria as seen during inspections by fishery agencies this year. It appears that during periods of low tailwater, certain projects have difficulty maintaining proper head at main fishway entrances. Some main entrance gates bottom-out and water depth over these weirs are not up to desired criteria. Also it was noted that auxiliary water pumps were not being run at a rate to achieve the desired amount of water for attracting fish to the fish ladders and maintaining proper head at main fishway entrances.

  12. 7 CFR 1219.9 - First handler.

    Science.gov (United States)

    2010-01-01

    ..., AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.9 First handler. First handler means a person operating in the Hass avocado marketing system that sells domestic... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS...

  13. 7 CFR 926.8 - Handler.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.8 Handler. Handler...

  14. Baggage handler seniority and musculoskeletal symptoms

    DEFF Research Database (Denmark)

    Bern, Stine Hvid; Brauer, Charlotte; Møller, Karina Lauenborg

    2013-01-01

    Heavy lifting is associated with musculoskeletal disorders but it is unclear whether it is related to acute reversible effects or to chronic effects from cumulated exposure. The aim of this study was to examine whether musculoskeletal symptoms in Danish airport baggage handlers were associated wi...... with their seniority as baggage handler, indicating chronic effects from cumulated workload....

  15. 7 CFR 915.120 - Handler registration.

    Science.gov (United States)

    2010-01-01

    ... production area where the avocados will be prepared for market, and name and address of person responsible... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Rules and Regulations § 915.120 Handler registration. (a) Each handler who desires to handle avocados...

  16. PREVALENCE OF INTESTINAL PARASITES AMONG FOOD HANDLERS OF SARI, NORTHERN IRAN

    Directory of Open Access Journals (Sweden)

    Mehdi SHARIF

    2015-04-01

    Full Text Available Parasitic infection is highly prevalent throughout the developing countries of the world. Food handlers are a potential source of infection for many intestinal parasites and other enteropathogenic infections as well. The aim of this study was to determine the prevalence of intestinal parasite carriers among food handlers attending the public health center laboratory in Sari, Northern Iran for annual check-up. The study was performed from August 2011 through February 2012. Stool samples were collected from 1041 male and female food handlers of different jobs aged between 18 to 63 years and were examined following standard procedures. Sociodemographic, environmental and behavioral data analysis of the food handlers were recorded in a separate questionnaire. Intestinal parasites were found in 161 (15.5% of the studied samples. Seven species of protozoan or helminth infections were detected. Most of the participants were infected with Giardia lamblia (53.9% followed by Blastocystis hominis (18%, Entamoeba coli (15.5%, Entamoeba histolytica/dispar (5.5%, Cryptosporidium sp. (3.1%, Iodamoeba butschlii (3.1% and Hymenolepis nana (1.9% as the only helminth infection. The findings emphasized that food handlers with different pathogenic organisms may predispose consumers to significant health risks. Routine screening and treatment of food handlers is a proper tool in preventing food-borne infections.

  17. 7 CFR 946.60 - Inspection and certification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection and certification. 946.60 Section 946.60... WASHINGTON Order Regulating Handling Inspection and Certification § 946.60 Inspection and certification. (a... this subpart, each handler who first ships potatoes shall, prior to making shipment, cause each...

  18. Subacromial shoulder disorders among baggage handlers

    DEFF Research Database (Denmark)

    Thygesen, Lau Caspar; Mikkelsen, Sigurd; Pedersen, Ellen Bøtker

    2016-01-01

    PURPOSE: To assess the influence of cumulative employment as baggage handler on the risk of incident subacromial shoulder disorders. Baggage handling is characterized by repetitive work primarily consisting of heavy lifting in awkward positions and time pressure. METHODS: This cohort study is based...... increased incidence of subacromial shoulder disorders for workers with longer cumulative years of employment. These results support that long-term lifting in awkward positions and time pressure influences the risk of subacromial shoulder disorders....... System. The primary exposure was cumulative years of employment as a baggage handler, and the primary outcome was diagnoses and surgical treatment of subacromial shoulder disorders. RESULTS: The cohort contained 3396 baggage handlers and 63,909 workers in the reference group. Baggage handlers with longer...

  19. First annual report RCRA post-closure monitoring and inspections for the U-3fi waste unit. Final report, July 1995--October 1996

    International Nuclear Information System (INIS)

    Emer, D.F.

    1997-01-01

    This annual Neutron Soil Moisture Monitoring report provides an analysis and summary for site inspections, meteorological information, and neutron soil moisture monitoring data obtained at the U-3fi RCRA Unit, located in Area 3 of the Nevada Site (NTS), Nye County, Nevada during the July 1995 to October 1996 period. Inspections of the U-3fi RCRA Unit are conducted to determine and document the physical condition of the covers, facilities, and any unusual conditions that could impact the proper operation of the waste unit closure. The objective of the neutron logging is to monitor the soil moisture conditions along the 420 ft ER3-3 borehole and detect changes that may be indicative of moisture movement in the regulated interval. This is the first annual report on the U-3fi closure and includes the first year baseline monitoring data as well as one quarter of compliance monitoring data

  20. Knowledge and practice of food hygiene and safety among food handlers in fast food restaurants in Benin City, Edo State.

    Science.gov (United States)

    Isara, A R; Isah, E C

    2009-09-01

    To assess the knowledge and practice of food hygiene and safety among food handlers in fast food restaurants in Benin City, Edo State. A descriptive cross-sectional study was carried out among 350 respondents who were selected by means of a systematic sampling method and interviewed using a semi-structured researcher-administered questionnaire. An observational checklist was thereafter used to inspect their personal hygiene status. The mean age of the food handlers was 26.4 +/- 6.1 years. Two hundred and twenty eight (65.1%) were females while 34.9% were males. A majority (98%) of the respondents had formal education. There was good knowledge and practice of food hygiene and safety among the respondents. Knowledge was significantly influenced by previous training in food hygiene and safety (p = 0.002). Food handlers who had worked for longer years in the fast food restaurants had better practice of food hygiene and safety (p = 0.036). The level of education of respondents did not significantly influenced their practice of food hygiene and safety (p = 0.084). Although, 299 (85.4%) food handlers were generally clean, skin lesions was seen in 4 (7.3%) of them. This study showed good knowledge and practice of food hygiene and safety by food handlers in the fast food restaurants in Benin City, but there is need for improvement through training and retraining of food handlers by the management of the restaurants and the local government authorities.

  1. Annual Report RCRA Post-Closure Monitoring and Inspections for CAU 112: Area 23 Hazardous Waste Trenches, Nevada Test Site, Nevada, for the period October 2000-July 2001

    International Nuclear Information System (INIS)

    Tobiason, D. S.

    2002-01-01

    This annual Neutron Soil Moisture Monitoring report provides an analysis and summary for site inspections, meteorological information, and neutron soil moisture monitoring data obtained at the Area 23 Hazardous Waste Trenches Resource Conservation and Recovery Act (RCRA) unit, located in Area 23 of the Nevada Test Site, Nye County, Nevada, during the October 2000--July 2001 monitoring period. Inspections of the Area 23 Hazardous Waste Trenches RCRA unit are conducted to determine and document the physical condition of the covers, facilities, and any unusual conditions that could impact the proper operation of the waste unit closure. Physical inspections of the closure were completed quarterly and indicated that the site is in good condition with no significant findings noted. An annual subsidence survey of the elevation markers was conducted in July 2001. There has been no subsidence at any of the markers since monitoring began eight years ago. Precipitation for the period October 2000 through July 2001 was 9.42 centimeters (cm) (3.71 inches [in]) (U.S. National Weather Service, 2001). The prior year annual rainfall (January 2000 through December 2000) was 10.44 cm (4.1 1 in.). The recorded average annual rainfall for this site from 1972 to January 2000 is 14.91 cm (5.87 in.). The objective of the neutron logging program is to monitor the soil moisture conditions along 30 neutron access tubes and detect changes that may be indicative of moisture movement at a point located directly beneath each trench. All monitored access tubes are within the compliance criteria of less than 5 percent residual volumetric moisture content at the compliance point directly beneath each respective trench. Soil conditions remain dry and stable underneath the trenches

  2. Code of practice for food handler activities.

    Science.gov (United States)

    Smith, T A; Kanas, R P; McCoubrey, I A; Belton, M E

    2005-08-01

    The food industry regulates various aspects of food handler activities, according to legislation and customer expectations. The purpose of this paper is to provide a code of practice which delineates a set of working standards for food handler hygiene, handwashing, use of protective equipment, wearing of jewellery and body piercing. The code was developed by a working group of occupational physicians with expertise in both food manufacturing and retail, using a risk assessment approach. Views were also obtained from other occupational physicians working within the food industry and the relevant regulatory bodies. The final version of the code (available in full as Supplementary data in Occupational Medicine Online) therefore represents a broad consensus of opinion. The code of practice represents a set of minimum standards for food handler suitability and activities, based on a practical assessment of risk, for application in food businesses. It aims to provide useful working advice to food businesses of all sizes.

  3. 2015 annual report of the managing director of the CEA general and nuclear inspection for nuclear safety and radiation protection

    International Nuclear Information System (INIS)

    2016-08-01

    After an introduction by the managing director of the CEA general and nuclear inspection about activities and events of 2015, this report proposes some key figures and indicators to illustrate these activities and events. The next parts discuss, present and comment how a culture of safety is at the heart of the continuous progress approach by the CEA. The next chapters propose overviews and comments of lessons learned from nuclear inspections within the frame of audit programme or within the frame of centres' safety audits, and from reactive inspections. The last parts address the follow-up of recommendations, and progress orientations and perspectives

  4. Bacterial assessment of food handlers in Sari City, Mazandaran Province, north of Iran

    Directory of Open Access Journals (Sweden)

    Mohtaram Nasrolahei

    2017-03-01

    Full Text Available Food handlers with poor personal hygiene could be potential sources of infection due to pathogenic bacteria. This study was designed to determine the prevalence of bacterial infestation among the food handlers attending the public health center laboratory in Sari, northern Iran for annual check-up.This study was performed from September 2013 to August 2014. Stool samples, fingernail specimens of both hands and nasal swabs were collected from 220 male and female food handlers of different jobs, aged between 17–65 years. The samples were cultured on bacteriological culture media and bacterial species were identified following standard procedures. A structured questionnaire was used to record sociodemographic and behavioral data analysis of the food handlers.Of the total 220 subjects examined, 62.2% showed positive culture for different bacterial species from their fingernail contents, 65.4% were found to be harboring Staphylococcus aureus in their nostrils and 0.9% tested positive for Shigella boydii from stool samples. Staphylococcus aureus was the predominant bacteria isolated from fingernail specimens (46%, followed by Escherichia coli (29.2%, Coliforms (18.2% and Pseudomonas aeruginosa (6.6%. This study showed a statistically significant difference in the rate of bacterial infestation between different occupational categories (p = 0.04. Butchers showed the highest prevalence of bacteria (86.6% in their fingernail contents, followed by fast food workers (76.5%, bakers (73.5%, chicken store workers (73%, school cafeterias staff (53.3%, restaurant workers (46.9% and fruit/vegetables sellers (42.5%. The highest rate of nasal carrier for Staphylococcus aureus was observed among chicken store workers 14/17(20.8%.These findings indicate the need for intensive training/retraining and health education of all food service employees and strengthening the existing screening methods to control the problem of bacterial infestation in food handlers

  5. 7 CFR 984.71 - Reports of handler inventory.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports of handler inventory. 984.71 Section 984.71... Regulating Handling Reports, Books, and Other Records § 984.71 Reports of handler inventory. Each handler... or her inventory of inshell and shelled walnuts. [73 FR 11339, Mar. 3, 2008] ...

  6. 7 CFR 984.471 - Reports of handler inventory.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports of handler inventory. 984.471 Section 984.471 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Administrative Rules and Regulations Reports § 984.471 Reports of handler inventory. Reports of handler inventory...

  7. The sanitary conditions of food service establishments and food safety knowledge and practices of food handlers in bahir dar town.

    Science.gov (United States)

    Kibret, Mulugeta; Abera, Bayeh

    2012-03-01

    Lack of basic infrastructure, poor knowledge of hygiene and practices in food service establishments can contribute to outbreaks of foodborne illnesses. The aims of this study were to investigate the food safety knowledge and practices of food handlers and to assess the sanitary conditions of food service establishments in Bahir Dar town. A cross-sectional study was conducted in Bahir Dar in May 2011 and data were collected using questionnaire and observation checklist on employees' knowledge of food hygiene and their practices as well on sanitary conditions of the food service establishments The median age of the food handlers was 22 years and among the 455 subjects 99 (21.8%) have had food hygiene training. Sixty six percent of the establishments had flush toilets whereas 5.9% of the establishment had no toilet. Only 149 (33.6%) of the establishments had a proper solid waste collection receptacle and there was statistically significant association between the sanitary conditions and license status of the establishments (p=0.01). Most of all, knowledge gap in food hygiene and handling practice was observed. In addition, there was statistically significant difference between trained (professional) handlers and non-trained handlers with regard to food hygiene practices (p<0.05). While more than 50% of the handlers prepare meals ahead of the peak selling time, more than 50% of the left over was poorly managed. This study revealed poor sanitary conditions and poor food hygiene practices of handlers. Educational programs targeted at improving the attitude of food handlers and licensing and regular inspections have been recommended.

  8. 7 CFR 987.168 - Handler records.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handler records. 987.168 Section 987.168 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... weight and destination or name and address of the person to whom each shipment was sent; (c) If different...

  9. 7 CFR 1207.512 - Designated handler.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... shipper, processor, or other person who first places the potatoes in the channels of commerce. A producer... became the first handler of such potatoes. Examples. A cooperative marketing association, or other person...

  10. Variable speed drives boost air handler benefits

    Energy Technology Data Exchange (ETDEWEB)

    Twenty-four separate roof-top air handlers, controlled by variable speed ac motor drives, provide comfort and ventilation for employees at a 500,000 sq. ft. sportswear distribution center in southern Virginia. They were chosen over optional packaged HVAC units because of their flexibility, efficiency, and short payback advantages. The operation of the units is described.

  11. Prevalence of intestinal parasites among food handlers at cafeteria of Jimma University Specialized Hospital, Southwest Ethiopia

    Directory of Open Access Journals (Sweden)

    Hundaol Girma

    2017-08-01

    Full Text Available Objective: To assess the prevalence of intestinal parasites and associated risk factors among food-handlers working at cafeteria of Jimma University Specialized Hospital, Jimma, Ethiopia. Methods: Socio-demographic and associated risk factors data were collected using a pretested structured questionnaire. Stool and finger-nail specimens were screened for intestinal parasites using direct wet mount and formol-ether concentration sedimentation techniques. Data were edited, cleaned, entered and analyzed using statistical package for social science (SPSS version 20. P ≤ 0.05 was taken as statistically significant. Results: A total of 94 food-handlers working at cafeteria of Jimma University Specialized Hospital were participated in the study. From the total 148 samples (94 stool and 54 fingernails content examined, 31 (33% were positive for one or more parasites. Over all eight types of intestinal parasites were identified. The most prevalent parasite identified was Ascaris lumbricoides (16% followed by Entamoeba histolytica/dispar (4.3%. There was significant association between parasitic infection and food handlers who did not practice hand washing after defecation and before serving food. Conclusions: Relatively high prevalence of intestinal parasites is detected indicating poor hygiene practice of the food-handlers at the study site. The study also identified finger-nail status, hand washing after defecation and before serving food as determinants of intestinal parasitic infection. It is crucial for provision of regular training on strict adherence to good personal hygiene and hygienic food-handling practices as well as regular inspection and medical checkup of food-handlers.

  12. Annual Report RCRA Post-Closure Monitoring and Inspections for CAU 112: Area 23 Hazardous Waste Trenches, Nevada Test Site, Nevada, for the Period October 1999-October 2000

    Energy Technology Data Exchange (ETDEWEB)

    D. F. Emer

    2001-03-01

    This annual Neutron Soil Moisture Monitoring report provides an analysis and summary for site inspections, meteorological information, and neutron soil moisture monitoring data obtained at the Area 23 Hazardous Waste Trenches Resource Conservation and Recovery Act (RCRA) unit, located in Area 23 of the Nevada Test Site, Nye County, Nevada, during the October 1999-October 2000 period. Inspections of the Area 23 Hazardous Waste Trenches RCRA unit are conducted to determine and document the physical condition of the covers, facilities, and any unusual conditions that could impact the proper operation of the waste unit closure. Physical inspections of the closure were completed quarterly and indicated that the site is in good condition with no significant findings noted. An annual subsidence survey of the elevation markers was conducted in August 2000. There has been no subsidence at any of the markers since monitoring began seven years ago. The objective of the neutron logging program is to monitor the soil moisture conditions along 30 neutron access tubes and detect changes that maybe indicative of moisture movement at a point located directly beneath each trench. Precipitation for the period October 1999 through October 2000 was 10.44 centimeters (cm) (4.11 inches [in.]) (U.S. National Weather Service, 2000). The prior year annual rainfall (January 1999 through December 1999) was 10.13cm (3.99 in.). The highest 30-day cumulative rainfall occurred on March 8, 2000, with a total of 6.63 cm (2.61 in.). The heaviest daily precipitation occurred on February 23,2000, with a total of 1.70 cm (0.67 in.) falling in that 24-hour period. The recorded average annual rainfall for this site, from 1972 to January 1999, is 15.06 cm (5.93 in.). All monitored access tubes are within the compliance criteria of less than 5 percent residual volumetric moisture content at the compliance point directly beneath each respective trench. Soil conditions remain dry and stable underneath the

  13. Assessment of food safety practices of food service food handlers (risk assessment data): testing a communication intervention (evaluation of tools).

    Science.gov (United States)

    Chapman, Benjamin; Eversley, Tiffany; Fillion, Katie; Maclaurin, Tanya; Powell, Douglas

    2010-06-01

    Globally, foodborne illness affects an estimated 30% of individuals annually. Meals prepared outside of the home are a risk factor for acquiring foodborne illness and have been implicated in up to 70% of traced outbreaks. The Centers for Disease Control and Prevention has called on food safety communicators to design new methods and messages aimed at increasing food safety risk-reduction practices from farm to fork. Food safety infosheets, a novel communication tool designed to appeal to food handlers and compel behavior change, were evaluated. Food safety infosheets were provided weekly to food handlers in working food service operations for 7 weeks. It was hypothesized that through the posting of food safety infosheets in highly visible locations, such as kitchen work areas and hand washing stations, that safe food handling behaviors of food service staff could be positively influenced. Using video observation, food handlers (n = 47) in eight food service operations were observed for a total of 348 h (pre- and postintervention combined). After the food safety infosheets were introduced, food handlers demonstrated a significant increase (6.7%, P < 0.05, 95% confidence interval) in mean hand washing attempts, and a significant reduction in indirect cross-contamination events (19.6%, P < 0.05, 95% confidence interval). Results of the research demonstrate that posting food safety infosheets is an effective intervention tool that positively influences the food safety behaviors of food handlers.

  14. 2016 Inspection and Annual Site Status Report for the Site A/Plot M, Illinois, Decommissioned Reactor Site July 2016

    Energy Technology Data Exchange (ETDEWEB)

    Murl, Jeffrey [USDOE Office of Legacy Management, Washington, DC (United States); Miller, Michele [Navarro Research and Engineering, Oak Ridge, TN (United States)

    2016-07-01

    The Site A/Plot M, Illinois, Decommissioned Reactor Site was inspected on May 17, 2016. The site, located within Cook County forest preserve that is open to the public, was found to be in good condition with one exception. Erosion on top of the grass-covered mound at Plot M continues to be a concern as presented in previous inspections. Ruts form in the soil on top of Plot M as a result of bike traffic using the open field as a pass thru between established bike trails within the forest preserve. Argonne National Laboratory (ANL) who is contracted directly from U.S. Department of Energy (DOE) has filled in the ruts with top soil and reseeding remains an ongoing process. Reseeded areas from 2015 are progressing nicely. No cause for a follow-up inspection was identified. In 2015, ANL plugged and abandoned 8 of 25 monitoring wells (BH41, BH51, BH52, BH54, DH9, DH10, DH13, and DH17). The 17 groundwater monitoring wells remaining at the site were inspected to confirm that they were locked and in good condition. Preliminary environmental monitoring results for 2015 are provided in a draft report titled Surveillance of Site A and Plot M, Report for 2015, prepared by ANL. The report also contains results of an independent analysis conducted by the Illinois Emergency Management Agency on some of the samples collected by ANL in 2015. The draft report states that the results of the surveillance program continue to indicate that the impact of radioactivity at Site A/Plot M is very low and does not endanger the health of those living in the area or visiting the site. The ANL monitoring report will be made available to the public on the DOE Office of Legacy Management public website when it is issued as final. A new county forest preserve campsite opened in 2015 at Bull Frog Lake, which is east of Plot M. Hiking trails connect Bull Frog Lake with Site A/Plot M. The site might receive more traffic from forest preserve visitors now that this new campsite is opened.

  15. The Mark 3 data base handler

    Science.gov (United States)

    Ryan, J. W.; Ma, C.; Schupler, B. R.

    1980-01-01

    A data base handler which would act to tie Mark 3 system programs together is discussed. The data base handler is written in FORTRAN and is implemented on the Hewlett-Packard 21MX and the IBM 360/91. The system design objectives were to (1) provide for an easily specified method of data interchange among programs, (2) provide for a high level of data integrity, (3) accommodate changing requirments, (4) promote program accountability, (5) provide a single source of program constants, and (6) provide a central point for data archiving. The system consists of two distinct parts: a set of files existing on disk packs and tapes; and a set of utility subroutines which allow users to access the information in these files. Users never directly read or write the files and need not know the details of how the data are formatted in the files. To the users, the storage medium is format free. A user does need to know something about the sequencing of his data in the files but nothing about data in which he has no interest.

  16. An outbreak of norovirus gastroenteritis associated with asymptomatic food handlers in Kinmen, Taiwan

    Directory of Open Access Journals (Sweden)

    Meng-Yu Chen

    2016-05-01

    Full Text Available Abstract Background In February 2015 an outbreak of gastroenteritis occurred in a distillery in Kinmen, Taiwan. At least 450 affected employees developed the symptoms of diarrhea and vomiting after attending a lunch banquet on 6 February. Epidemiological, laboratory and environmental investigations were conducted to identify the agent and source of this outbreak. Methods A case–control study was carried out among lunch attendees from the distillery. Using a semi-structured questionnaire, food and beverage consumption in the lunch banquet was assessed, as well as demographic and clinical data of the exposed people. An outbreak case was defined as a diner who developed at least three following symptoms: diarrhea, vomiting, abdominal pain, nausea, chills and/or weakness in the 72 h following the lunch. Controls were defined as lunch attendees who did not have any of the above symptoms. Rectal swabs or stool samples of the symptomatic exposed diners and food handlers as well as food and environmental samples were collected to test potential bacteria and viruses. Norovirus was detected by reverse transcription-polymerase chain reaction and sequence analysis. An environmental assessment, including environmental inspection of the restaurant and a review of work practices of food workers, was undertaken. Results Of 363 respondents with complete data, 169 met the case definition and 111 met the control definition. Consumption of pork liver in cold appetizers (adjusted odd ratio (aOR 3.23; 95 % confidence interval (CI: 1.26–8.30 and lamb chops (aOR: 3.98, 95 % CI: 1.74–9.11 were each associated with increased risk of illness. No cases but two asymptomatic food handlers who prepared or cooked the implicated foods tested positive for norovirus genotype I.6. Food and environmental samples were negative for any bacteria. Environmental assessment indicated that hand washing facilities were not properly accessible to food handlers. Inappropriate

  17. Annual Report RCRA Post-Closure Monitoring and Inspections for Corrective Action Unit 91: Area 3 U-3fi Injection Well, Nevada Test Site, Nevada, for the Period October 2001 - October 2002

    International Nuclear Information System (INIS)

    Richardson, G.

    2003-01-01

    This annual monitoring and inspection report provides an analysis and summary for site inspections, meteorological information, and neutron soil moisture monitoring data obtained at the U-3fi Injection Well during the October 2001 to October 2002 period. The U-3fi Injection Well is located in Area 3 of the Nevada Test Site (NTS), Nye County, Nevada. Inspections of the Area 3 U-3fi Injection Well are conducted to determine and document the physical condition of the concrete pad, facilities, and any unusual conditions that could impact the proper operation of the waste disposal unit closure. The objective of the neutron logging is to monitor the soil moisture conditions along the 128-meter (m) (420-feet [ft]) ER3-3 monitoring well and detect changes that may be indicative of moisture movement in the regulated interval extending between 73 to 82 m (240 to 270 ft)

  18. Intestinal Parasites among Waste-Handlers in Jos Metropolitan Area ...

    African Journals Online (AJOL)

    Intestinal Parasites among Waste-Handlers in Jos Metropolitan Area of Plateau State, Nigeria. ... Solid waste management is associated with health hazards. ... Waste disposal workers are at high risk of infection with different species of ...

  19. Genetic Variation of Giardia lamblia Isolates from Food-handlers in Kashan, Central Iran

    Directory of Open Access Journals (Sweden)

    Hossein HOOSHYAR

    2017-02-01

    Full Text Available Background: Based on genotyping study of human isolates of Giardia lamblia; humans are mainly infected by two assemblages A and B. The present study was carried out to determine the sub-assemblages of G. lamblia isolated from food handlers referred to Kashan health centers, central Iran, 2015.Methods: In this cross-sectional study, 3653 stool samples collected from food-handlers that annually refer to health center for getting a health certification and examined microscopically for G. lamblia cyst. Totally, 44 isolates were selected from 47 Giardia positive samples. Cysts were partially purified by the sucrose density gradient method. After freeze-thaw cycles, genomic DNA was extracted using QIAamp Stool Mini kit. A single step PCR-RFLP method was used to amplify a 458bp fragment at the glutamate dehydrogenase (gdh locus, restriction enzymes BspLI and RsaI were used for distinguish between genotypes A and B and their subgroups.Results: Of 44 isolates, 24(54.5% were sub-assemblage AII, 9(20.5% group B including 7(15.9% BIII and 2(4.6% BIV sub-assemblage and 11(25% isolates showed a mixed pattern of AII and B. Sub-assemblage AI was not detected in this study.Conclusion: The higher rate of sub-assemblage AII demonstrated an anthroponotic origin of the infection so infected food-handlers could directly transmit this protozoan to consumers via contaminated food and water. For finding of pattern of transmission and distribution of Giardia assemblages and sub-assemblage, more studies in human and animal population in different regions are necessary.

  20. An outbreak of Norwalk-like viral gastroenteritis in a frequently penalized food service operation: a case for mandatory training of food handlers in safety and hygiene.

    Science.gov (United States)

    Kassa, H

    2001-12-01

    In 1999, in Toledo, Ohio, an outbreak of gastroenteritis occurred among people who had attended a Christmas dinner banquet and had eaten food prepared by a local caterer. Overall, 93 of the 137 attendees (67.9 percent) reported illness. Eight sought medical care, and one was hospitalized. Case-control studies revealed that the illness was associated with eating tossed salad (odds ratio [OR] = 2.5, 95 percent confidence interval [CI] = 1.02-6.26). Eleven of 12 stool specimens that were taken from ill people tested positive for a Norwalk-like virus (NLV) but were negative for E. coli O157:H7, Salmonella, and Shigella. The primary source of the outbreak was not determined, but an infected food handler may have played a role in the transmission of the virus. The catering facility had been cited frequently for food safety and hygiene violations. None of the personnel or food handlers at this facility had been appropriately trained in safe food-handling practices, nor had the personnel at another local caterer that had prepared food items suspected of causing a multistate outbreak of NLVs. In Toledo, food service operations with trained personnel/food handlers received better inspection reports than food service operations without trained personnel and were less likely to contribute to foodborne outbreaks. Training of personnel and food handlers may be important for preventing outbreaks.

  1. Risk of subacromial shoulder disorder in airport baggage handlers

    DEFF Research Database (Denmark)

    Møller, Sanne Pagh; Brauer, Charlotte; Mikkelsen, Sigurd

    2018-01-01

    age,exposure variables showed close to significant associations with subacromial shoulder disorder.Results could not confirm our hypothesis that combined information on work task duration and shoulder load intensity was stronger associated with subacromial shoulder disorder than seniority.......Musculoskeletal shoulder-load among baggage handlers measured by combining duration and intensity based on biomechanical and epidemiological information may be a stronger predictor of subacromial shoulder disordersthanbaggage handler seniority.In 2012, a cohort of baggage handlers employed...... at Copenhagen Airport in 1990-2012, and a cohort of unskilledotherwise employed men answered a survey.Self-reported information on work tasks during employment in the airport in combination with work task specific biomechanically modelled forces in the shoulder joint was used to estimate shoulder-load. Exposure...

  2. Inspection Database

    Data.gov (United States)

    U.S. Department of Health & Human Services — FDA is disclosing the final inspection classification for inspections related to currently marketed FDA-regulated products. The disclosure of this information is not...

  3. 7 CFR 1205.512 - Collecting handlers and time of collection of $1 per bale assessment.

    Science.gov (United States)

    2010-01-01

    ... consumes domestically or exports cotton of that person's own production shall be the collecting handler for... handler first makes any payment or any credit to the producer's account for the cotton. The handler shall... disbursement based on the Form A loan documents. The producer's copy of the Cotton Producer's Note (Form CCC...

  4. Assisting Handlers Following Attacks on Dog Guides: Implications for Dog Guide Teams

    Science.gov (United States)

    Godley, Cheryl A.; Gillard, Marc A.

    2011-01-01

    Attacks by dogs on dog guides are traumatic for dog guide teams. One variable that affects a team's recovery is how handlers cope with emotional responses to the attack. This article presents a three-stage model for assisting handlers that is useful for handlers and dog guide instructors.

  5. In-service inspection and maintenance schedule for a typical TRIGA Mark-II reactor

    International Nuclear Information System (INIS)

    Boeck, H.

    1996-05-01

    This report lists all the systems and components of the TRIGA reactor Vienna which are inspected and maintained in regular intervals. These intervals are categorized in monthly, quarterly, semi-annual and annual inspections. Further the type of inspection and the responsibility for the inspection is shown. For each component specific inspection sheets have been developed, some examples are given in the annex. (author)

  6. Inspection planning

    International Nuclear Information System (INIS)

    Korosec, D.; Levstek, M.F.

    2001-01-01

    Slovenian Nuclear Safety Administration (SNSA) division of nuclear and radiological safety inspection has developed systematic approach to their inspections. To be efficient in their efforts regarding regular and other types of inspections, in past years, the inspection plan has been developed. It is yearly based and organized on a such systematic way, that all areas of nuclear safety important activities of the licensee are covered. The inspection plan assures appropriate preparation for conducting the inspections, allows the overview of the progress regarding the areas to be covered during the year. Depending on the licensee activities and nature of facility (nuclear power plant, research reactor, radioactive waste storage, others), the plan has different levels of intensity of inspections and also their frequency. One of the basic approaches of the plan is to cover all nuclear and radiological important activities on such way, that all regulatory requests are fulfilled. In addition, the inspection plan is a good tool to improve inspection effectiveness based on previous experience and allows to have the oversight of the current status of fulfillment of planned inspections. Future improvement of the plan is necessary in the light of newest achievements on this field in the nuclear world, that means, new types of inspections are planned and will be incorporated into plan in next year.(author)

  7. Sharp Injuries Among Hospital Waste Handlers | Olaitan | Nigerian ...

    African Journals Online (AJOL)

    , C as well as other before commencing on their jobs. Workers should be screened for infective diseases that can be of legal problem while at the job and the workers should be effectively immunized. Key words: sharp injuries, waste, handlers, ...

  8. Design of a 1-chip IBM-3270 protocol handler

    NARCIS (Netherlands)

    Spaanenburg, L.

    1989-01-01

    The single-chip design of a 20MHz IBM-3270 coax protocol handler in a conventional 3 μ CMOS process-technology is discussed. The harmonious combination of CMOS circuit tricks and high-level design disciplines allows the 50k transistor design to be compiled and optimized into a 35 mm**2 chip in 4

  9. Ventilatory Function and Cigarette Smoking in Cement Handlers in ...

    African Journals Online (AJOL)

    Introduction: Occupational exposure to dust and cigarette smoking play important roles in the pathogenesis of lung diseases, particularly in developing countries. To determine the effects of outdoor cement dust exposure and cigarette smoking on lung health, we compared ventilatory function in cement handlers (smokers ...

  10. 7 CFR 930.59 - Handler diversion privilege.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... limited to: (1) Contribution to a Board-approved food bank or other approved charitable organization; (2... of the Board and that the cost of such supervision is to be paid by the handler. Uniform fees for...

  11. Asteroseismology of δ Scuti and γ Doradus Stars Gerald Handler

    Indian Academy of Sciences (India)

    led to the observational detection and identification of a sufficient number ... satellite missions, theoretical advances on mode identification methods, ... The observational borders of the two pulsational instability strips (Rodriguez & Breger 2001; Handler & Shobbrook. 2002), with the thicker lines corresponding to the γ ...

  12. Prevalence of intestinal and urinary parasites among food-handlers ...

    African Journals Online (AJOL)

    53.3%) out of the food handlers harboured parasites of which 3 (10%) had Trichomonas vaginalis in their urine, 1(3.3%) recorded concomitant infection with Entamoeba histolytica, Ascaris lumbricoides and Trichuris trichiura, 5 (16.7%) had ...

  13. ATLAS TDAQ/DCS Event Filter Event Handler Requirements

    CERN Document Server

    Bee, C P; Meessen, C; Qian, Z; Touchard, F; Green, P; Pinfold, J L; Wheeler, S; Negri, A; Scannicchio, D A; Vercesi, V

    2002-01-01

    The second iteration of the Software Development Process of the ATLAS Event Filter has been launched. A summary of the design phase of the first iteration is given in the introduction. The document gives constraints, use cases, functional and non-functional requirements for the Event Handler sub-system of the Event Filter.

  14. 7 CFR 1210.517 - Determination of handler.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... PROMOTION PLAN Rules and Regulations Assessments § 1210.517 Determination of handler. The producer and... watermelons in the current of commerce. (a) The following examples are provided to aid in the identification...

  15. 7 CFR 1124.10 - Producer-handler.

    Science.gov (United States)

    2010-01-01

    ... or management of, nor has a financial interest in, another handler's operation; nor is any other... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE PACIFIC NORTHWEST MARKETING AREA Order...

  16. 7 CFR 1131.10 - Producer-handler.

    Science.gov (United States)

    2010-01-01

    ... or management of, nor has a financial interest in, another handler's operation; nor is any other... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating...

  17. Inspection vehicle

    International Nuclear Information System (INIS)

    Takahashi, Masaki; Omote, Tatsuyuki; Yoneya, Yutaka; Tanaka, Keiji; Waki, Tetsuro; Yoshida, Tomiji; Kido, Tsuyoshi.

    1993-01-01

    An inspection vehicle comprises a small-sized battery directly connected with a power motor or a direct power source from trolly lines and a switching circuit operated by external signals. The switch judges advance or retreat by two kinds of signals and the inspection vehicle is recovered by self-running. In order to recover the abnormally stopped inspection vehicle to the targeted place, the inspection vehicle is made in a free-running state by using a clutch mechanism and is pushed by an other vehicle. (T.M.)

  18. Ultrasonic inspection

    International Nuclear Information System (INIS)

    Satittada, Gannaga

    1984-01-01

    Ultrasonic inspection is one of the most widely used methods for nondestructive inspection. The beam of high-frequency sound wave, ultrasonic wave, is introduced into the material. It travels through the material with some attendant loss of energy and can be reflected at interfaces. The reflected beam is detected and analyzed. Ultrasonic inspection is used to detect flaws in metal parts as well as in welded, brazed and bonded joints during research work and developing production and service. It is also used to detect and locate porosity, pipe, and flakes. In addition, it can be used for the measurement of metal thickness. Ultrasonic inspection is therefore used for quality control and material inspection in all major industries

  19. A Cohort Study on Meniscal Lesions among Airport Baggage Handlers

    DEFF Research Database (Denmark)

    Mikkelsen, Sigurd; Brauer, Charlotte; Pedersen, Ellen Bøtker

    2016-01-01

    socioeconomic background and less knee-straining work. Baggage handlers lifted suitcases with an average weight of approximately 15 kg, in total approximately five tonnes during a 9-hour workday. The cohort was followed in the National Patient Register and Civil Registration System. The outcome was a first time......Meniscal lesions are common and may contribute to the development of knee arthrosis. A few case-control and cross-sectional studies have identified knee-straining work as risk factors for meniscal lesions, but exposure-response relations and the role of specific exposures are uncertain...... of unskilled men employed at Copenhagen Airport or in other companies in the metropolitan Copenhagen area from 1990 to 2012 (the Copenhagen Airport Cohort). The cohort at risk included 3,307 airport baggage handlers with heavy lifting and kneeling or squatting work tasks and 63,934 referents with a similar...

  20. Hurdles at work: perceptions of hospital food handlers

    Directory of Open Access Journals (Sweden)

    Sigulem Dirce

    2009-07-01

    Full Text Available Abstract Background Food handlers have a very important role in preventing food contamination during its preparation and distribution. This responsibility is even greater in hospitals, since a large number of patients have low immunity and consequently food contamination by pathogenic bacteria could be particularly harmful. Therefore, a good working environment and periodic training should be provided to food handlers by upper management. Methods This study is qualitative research by means of focus group and thematic content analysis methodologies to examine, in detail, the statements by food handlers working in the milk and specific-diet kitchens in a hospital to understand the problems they face in the workplace. Results We found that food handlers are aware of the role they play in restoring patients' health; they consider it important to offer a good-quality diet. However, according to their perceptions, a number of difficulties prevent them from reaching this aim. These include: upper management not prioritizing human and material resources to the dietetic services when making resource allocation decisions; a perception that upper management considers their work to be of lesser importance; delayed overtime payments; lack of periodic training; managers lacking administrative skills; insufficient dietitian staff assistants, leading to overwork, at the same time as there is an excess of dietitians; unhealthy environmental working conditions – high temperature, high humidity, loud and constant noise level, poor ventilation; lack of food, and kitchen utensils and equipment; and relationship conflicts with chief dieticians and co-workers. Conclusion From these findings, improvement in staff motivation could be achieved by considering non-financial incentives, such as improvement in working conditions and showing appreciation and respect through supervision, training and performance appraisal. Management action, such as investments in

  1. Automatic Generation of Safe Handlers for Multi-Task Systems

    OpenAIRE

    Rutten , Éric; Marchand , Hervé

    2004-01-01

    We are interested in the programming of real-time control systems, such as in robotic, automotive or avionic systems. They are designed with multiple tasks, each with multiple modes. It is complex to design task handlers that control the switching of activities in order to insure safety properties of the global system. We propose a model of tasks in terms of transition systems, designed especially with the purpose of applying existing discrete controller synthesis techniques. This provides us...

  2. Hurdles at work: perceptions of hospital food handlers.

    Science.gov (United States)

    Bertin, Cilce Helena Figueiredo Preza; Rezende, Magda Andrade; Sigulem, Dirce Maria; Morais, Tania Beninga

    2009-07-24

    Food handlers have a very important role in preventing food contamination during its preparation and distribution. This responsibility is even greater in hospitals, since a large number of patients have low immunity and consequently food contamination by pathogenic bacteria could be particularly harmful. Therefore, a good working environment and periodic training should be provided to food handlers by upper management. This study is qualitative research by means of focus group and thematic content analysis methodologies to examine, in detail, the statements by food handlers working in the milk and specific-diet kitchens in a hospital to understand the problems they face in the workplace. We found that food handlers are aware of the role they play in restoring patients' health; they consider it important to offer a good-quality diet. However, according to their perceptions, a number of difficulties prevent them from reaching this aim. These include: upper management not prioritizing human and material resources to the dietetic services when making resource allocation decisions; a perception that upper management considers their work to be of lesser importance; delayed overtime payments; lack of periodic training; managers lacking administrative skills; insufficient dietitian staff assistants, leading to overwork, at the same time as there is an excess of dietitians; unhealthy environmental working conditions--high temperature, high humidity, loud and constant noise level, poor ventilation; lack of food, and kitchen utensils and equipment; and relationship conflicts with chief dieticians and co-workers. From these findings, improvement in staff motivation could be achieved by considering non-financial incentives, such as improvement in working conditions and showing appreciation and respect through supervision, training and performance appraisal. Management action, such as investments in intermediary management so that managers have the capacity to provide supportive

  3. Area 6 Decontamination Pond Corrective Action Unit 92 Post-Closure Inspection Annual Report for the Period January 2000-December 2000

    International Nuclear Information System (INIS)

    Traynor, J. L.

    2001-01-01

    The Area 6 Decontamination Pond, Corrective Action Unit 92, was closed in accordance with the Resource Conservation and Recovery Act (RCRA) Part B Operational Permit (Nevada Division of Environmental Protection [NDEP, 1995]) and the Federal Facility Agreement and Consent Order (NDEP, 1996) on May 11, 1999. Historically the Decontamination Pond was used for the disposal of partially treated liquid effluent discharged from the Decontamination Facility (Building 6-05) and the Industrial Laundry (Building 6-07) (U.S. Department of Energy, Nevada Operations Office [DOE/NV], 1996). The Decontamination Pond was constructed and became operational in 1979. Releases of RCRA-regulated hazardous waste or hazardous waste constituents have not been discharged to the Decontamination Pond since 1988 (DOE/NV, 1996). The pipe connecting the Decontamination Pond and Decontamination Facility and Industrial Laundry were cut and sealed at the Decontamination Pad Oil/Water Separator in 1992. The Decontamination Pond was closed in place by installing a RCRA cover. Fencing was installed around the periphery to prevent accidental damage to the cover. Post-closure monitoring at the site consists of quarterly inspections of the RCRA cover and fencing, and a subsidence survey. Additional inspections are conducted if: Precipitation occurs in excess of 1.28 centimeters (cm) (0.50 inches [in]) in a 24-hour period, or An earthquake occurs with a magnitude exceeding 4.5 on the Richter scale within 100 kilometers (km) (62 miles [mi]) of the closure

  4. Area 6 Decontamination Pond Corrective Action Unit 92 Post-Closure Inspection Annual Report for the Period January 2000-December 2000

    Energy Technology Data Exchange (ETDEWEB)

    J. L. Traynor

    2001-03-01

    The Area 6 Decontamination Pond, Corrective Action Unit 92, was closed in accordance with the Resource Conservation and Recovery Act (RCRA) Part B Operational Permit (Nevada Division of Environmental Protection [NDEP, 1995]) and the Federal Facility Agreement and Consent Order (NDEP, 1996) on May 11, 1999. Historically the Decontamination Pond was used for the disposal of partially treated liquid effluent discharged from the Decontamination Facility (Building 6-05) and the Industrial Laundry (Building 6-07) (U.S. Department of Energy, Nevada Operations Office [DOE/NV], 1996). The Decontamination Pond was constructed and became operational in 1979. Releases of RCRA-regulated hazardous waste or hazardous waste constituents have not been discharged to the Decontamination Pond since 1988 (DOE/NV, 1996). The pipe connecting the Decontamination Pond and Decontamination Facility and Industrial Laundry were cut and sealed at the Decontamination Pad Oil/Water Separator in 1992. The Decontamination Pond was closed in place by installing a RCRA cover. Fencing was installed around the periphery to prevent accidental damage to the cover. Post-closure monitoring at the site consists of quarterly inspections of the RCRA cover and fencing, and a subsidence survey. Additional inspections are conducted if: Precipitation occurs in excess of 1.28 centimeters (cm) (0.50 inches [in]) in a 24-hour period, or An earthquake occurs with a magnitude exceeding 4.5 on the Richter scale within 100 kilometers (km) (62 miles [mi]) of the closure.

  5. Annual Report RCRA Post-Closure Monitoring and Inspections for CAU 91: Area 3 U-3fi Injection Well, Nevada Test Site, Nevada, for the period October 2000-October 2001

    International Nuclear Information System (INIS)

    Tobiason, D. S.

    2002-01-01

    This annual Neutron Soil Moisture Monitoring report provides an analysis and summary for site inspections, meteorological information, and neutron soil moisture monitoring data obtained at the U-3fi Injection Well during the October 2000 to October 2001 period. The U-3fi Injection Well is located in Area 3 of the Nevada Test Site (NTS), Nye County, Nevada. Inspections of the Area 3 U-3fi Injection Well are conducted to determine and document the physical condition of the concrete pad, facilities, and any unusual conditions that could impact the proper operation of the waste disposal unit closure. The objective of the neutron-logging program is to monitor the soil moisture conditions along the 128-meter (m) (420-ft) ER3-3 monitoring well and detect changes that may be indicative of moisture movement in the regulated interval extending between 73 to 82 m (240 to 270 ft) or to detect changes that may be indicative of subsidence within the disposal unit itself

  6. Hospital Inspections

    Data.gov (United States)

    U.S. Department of Health & Human Services — Welcome to hospitalinspections.org, a website run by the Association of Health Care Journalists (AHCJ) that aims to make federal hospital inspection reports easier...

  7. Salmonella serotypeTyphi, Shigella, and intestinal parasites among food handlers at Bahir Dar University, Ethiopia.

    Science.gov (United States)

    Abera, Bayeh; Yitayew, Gashaw; Amare, Hiwot

    2016-02-28

    Food handlers play a major role in the transmission of Salmonella serotype Typhi (S. Typhi), Shigella, and intestinal parasites. This study was conducted to determine the prevalence of S. Typhi, Shigella, and intestinal parasites among food handlers at Bahir Dar University, Ethiopia. A cross-sectional study was conducted in June 2014. Stool samples from 410 food handlers were examined for bacterial pathogens and parasites. Pearson's Chi-square test, Fisher's exact test, and bivariate and multivariate logistic regression analyses were used where appropriate. The prevalence of S. Typhi, Shigella, and intestinal parasites among food handlers was 11 (2.7%), 5 (1.2%), and 53 (12.9%), respectively. Among eight intestinal parasites identified, the two most prevalent intestinal parasites were hookworm 26 (6.3%) and G. lamblia 13 (3.1%). Male food handlers were more likely to be positive than were female food handlers for S. Typhi and intestinal parasites. Furthermore, food handlers who had a history of regular medical checkups were less infected with intestinal parasites. Being male (AOR: 2.1, 95% CI: 1.2, 4.4) and not attending medical checkups (AOR: 2.9, 95% CI: 1.4, 6.1) were independent predictors of intestinal parasitic infection in food handlers. Male food handlers were reluctant to have regular parasitological examinations. There was a high proportion of food handlers with S. Typhi, Shigella, and intestinal parasites in their faces. Special emphasis should be placed on S. Typhicarriers and male food handlers. Education and periodical medical checkups for intestinal parasites and S. Typhi should be considered as intervention measures.

  8. 46 CFR 167.15-20 - Inspections of nautical school ships.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Inspections of nautical school ships. 167.15-20 Section... NAUTICAL SCHOOL SHIPS Inspections § 167.15-20 Inspections of nautical school ships. (a) At each annual inspection, or oftener if deemed necessary, the inspector will inspect the hull, boilers, machinery...

  9. Operational inspections

    International Nuclear Information System (INIS)

    Bystersky, M.

    1997-01-01

    Special equipment is described, designed for inspection of reactor pressure vessels performed from the inside. Central shaft manipulator ZMM-5 is available for crack detection control using ultrasound and eddy currents, for visual check of surfaces, repair works at the reactor pressure vessel, and hardness measurements. The manipulator consists of the manipulator bridge, a cable container, shaft segments, a control mechanism and auxiliary parts. Eight inspections were performed at the Bohunice nuclear power plant and two at the Paks nuclear power plant. (M.D.)

  10. Epidemiology of injury among handlers and dogs competing in the sport of agility.

    Science.gov (United States)

    Kerr, Zachary Y; Fields, Sarah; Comstock, R Dawn

    2014-07-01

    Little is known about the epidemiology of dog sport-related injuries. This study examines injuries among handlers and dogs in the sport of dog agility. A cross-sectional pilot study captured data on demographics, exposures, and injury for a sample of agility handlers and dogs. Logistic regressions predicted odds of injury. Survey of 217 handlers and 431 dogs identified 31 handler injuries (1.55 training injuries per 1000 hours, 2.14 competition injuries per 1000 runs) and 38 dog injuries (1.74 training injuries per 1000 hours, 1.72 competition injuries per 1000 runs). Handlers most commonly injured knees (48.4%) and lower trunk (29.0%). Most common diagnoses were strains (51.6%) and sprains (32.3%). Obese handlers had increased odds of injury compared with normal weight handlers (OR = 5.5, P Dogs most commonly injured front paws (23.7%) and shoulders (15.8%). Most common diagnoses were strains (44.7%) and cut/scrapes (21.1%). Injury was positively associated with dog's age (P benefits, dog agility poses a risk of injury to both handlers and dogs. Future research on specific mechanisms of injury should drive evidence-based injury prevention strategies.

  11. Risk factors for episodes of enteric disease in cattle wastes handlers in Tanzania

    DEFF Research Database (Denmark)

    Madoshi, B; Lupindu, A. M.; Mtambo, MMA

    2017-01-01

    of handlers who were aware of risks of acquiring enteric episodes in animal waste handlers was low (43.6 %. There was limited awareness of government guideline on handling such wastes (3.2%) and washing hands without soap was found to be the most common health measures taken after handling animal wastes (70...

  12. Dog handlers' and dogs' emotional and cortisol secretion responses associated with animal-assisted therapy sessions

    NARCIS (Netherlands)

    Haubenhofer, D.K.; Kirchengast, S.

    2007-01-01

    The study investigated 13 dog handlers and 18 companion dogs (Canis familiaris) working as teams in nonhuman animal-assisted service. The handlers described in questionnaires what emotions they chose to associate with their daily life and therapeutic work. They described their emotional condition

  13. Knowledge, attitudes and practices of food handlers in food safety: An integrative review.

    Science.gov (United States)

    Zanin, Laís Mariano; da Cunha, Diogo Thimoteo; de Rosso, Veridiana Vera; Capriles, Vanessa Dias; Stedefeldt, Elke

    2017-10-01

    This study presents an overview of the relationship between knowledge, attitudes and practices (KAP) of food handlers with training in food safety, in addition to proposing reflections on the training of food handlers, considering its responsibility for food safety and health of consumers. The review was based on the integrative method. The descriptors used were: (food handler), (knowledge, attitudes and practice) and (training). Six databases were searched, 253 articles were consulted and 36 original articles were included. Fifty per cent of the articles pointed that there was no proper translation of knowledge into attitudes/practices or attitudes into practices after training. Knowledge, attitudes and practices of food handlers are important for identifying how efficient training in food safety is allowing prioritize actions in planning training. The evaluation of KAP is the first step to understand the food handler's point of view. After this evaluation other diagnostic strategies become necessary to enhance this understanding. Copyright © 2017. Published by Elsevier Ltd.

  14. PREVALENCE OF INTESTINAL PARASITES AMONG FOOD HANDLERS IN WESTERN IRAN

    Directory of Open Access Journals (Sweden)

    Farnaz Kheirandish

    2014-04-01

    Full Text Available Parasitic infection is one of the problems that affect human health, especially in developing countries. In this study, all of the fast food shops, restaurants, and roast meat outlets of Khorramabad (Western Iran and all the staff employed by them, some 210 people, were selected through a census and their stools were examined for the presence of parasites. The parasitological tests of direct wet-mount, Lugol's iodine staining, formaldehyde-ether sedimentation and Trichrome staining techniques were performed on the samples. The data was analyzed with a chi-square test and logistic regression was selected as the analytical model. The results showed 19 (9% stool specimens were positive for different intestinal parasites. These intestinal parasites included Giardia lamblia2.9%, Entamoeba coli 4.3%, Blastocystis sp. 1.4%, and Hymenolepis nana 0.5%. There was a significant difference between the presence of a valid health card, awareness of transmission of intestinal parasites, participation in training courses in environmental health with intestinal parasites (p 0.05. To control parasitic infection in food handlers, several strategies are recommended such as stool examinations every three months, public education, application of health regulations, controlling the validity of health cards and training on parasitic infection transmission. In this regard, the findings of the present study can be used as a basis to develop preventive programs targeting food handlers because the spread of disease via them is a common problem worldwide.

  15. Prevalence of intestinal parasites among food handlers in Western Iran.

    Science.gov (United States)

    Kheirandish, Farnaz; Tarahi, Mohammad Javad; Ezatpour, Behrouz

    2014-01-01

    Parasitic infection is one of the problems that affect human health, especially in developing countries. In this study, all of the fast food shops, restaurants, and roast meat outlets of Khorramabad (Western Iran) and all the staff employed by them, some 210 people, were selected through a census and their stools were examined for the presence of parasites. The parasitological tests of direct wet-mount, Lugol's iodine staining, formaldehyde-ether sedimentation and Trichrome staining techniques were performed on the samples. The data was analyzed with a chi-square test and logistic regression was selected as the analytical model. The results showed 19 (9%) stool specimens were positive for different intestinal parasites. These intestinal parasites included Giardia lamblia 2.9%, Entamoeba coli 4.3%, Blastocystis sp. 1.4%, and Hymenolepis nana 0.5%. There was a significant difference between the presence of a valid health card, awareness of transmission of intestinal parasites, participation in training courses in environmental health with intestinal parasites (p 0.05). To control parasitic infection in food handlers, several strategies are recommended such as stool examinations every three months, public education, application of health regulations, controlling the validity of health cards and training on parasitic infection transmission. In this regard, the findings of the present study can be used as a basis to develop preventive programs targeting food handlers because the spread of disease via them is a common problem worldwide.

  16. Biomarkers of Sensitivity and Exposure in Washington State Pesticide Handlers

    Science.gov (United States)

    Keifer, M.C.; Checkoway, H.; De Roos, A.J.; Farin, F.M.; Fenske, R.A.; Richter, R.J.; van Belle, G.; Furlong, C.E.

    2011-01-01

    Organophosphate (OP) and N-methyl-carbamate (CB) insecticides are widely used in agriculture in the US and abroad. These compounds – which inhibit acetylcholinesterase (AChE) enzyme activity – continue to be responsible for a high proportion of pesticide poisonings among US agricultural workers. It is possible that some individuals may be especially susceptible to health effects related to OP/CB exposure. The paraoxonase (PON1) enzyme metabolizes the highly toxic oxon forms of some OPs, and an individual's PON1 status may be an important determinant of his or her sensitivity to these chemicals. This chapter discusses methods used to characterize individual PON1 status and reviews previous epidemiologic studies that have evaluated PON1-related sensitivity to OPs in relation to various health endpoints. It also describes an ongoing longitudinal study among OP-exposed agricultural pesticide handlers who are participating in a recently implemented cholinesterase monitoring program in Washington State. This study will evaluate handlers' PON1 status as a hypothesized determinant of butyrylcholinesterase (BuChE) inhibition. Such studies will be useful to determine how regulatory risk assessments might account for differences in PON1-related OP sensitivity when characterizing inter-individual variability in risk related to OP exposure. Recent work assessing newer and more sensitive biomarkers of OP exposure is also discussed briefly in this chapter. PMID:20221867

  17. Alarm handler for the advanced photon source control system

    International Nuclear Information System (INIS)

    Kraimer, M.R.; Cha, B.K.; Anderson, M.

    1991-01-01

    The Advanced Photon Source (APS), now under construction at Argonne National Laboratory, will have a control system employing graphics workstations at the operator interface level and VME-based microprocessors operating with a distributed database at the field level. The alarm handler is an application utilizing X-Windows running on one or more operator interface workstations which monitors alarms generated by the VME-based microprocessors. Alarms can be grouped in a hierarchical manner. The operator can monitor, acknowledge, and mask alarms either individually or aggregately. Alarm changes of state and all operator modifications are logged. When alarms occur, display windows are automatically generated conveying system and subsystem relationships and severity. Menus are used to modify the alarm action configuration files and to obtain help. Since alarm groups are defined via an alarm configuration file, the alarm handler is a general purpose application which can be customized to monitor a single subsystem or configured to monitor the entire accelerator complex. 2 refs., 2 figs

  18. Sex differences in the herding styles of working sheepdogs and their handlers.

    Directory of Open Access Journals (Sweden)

    Erin Kydd

    Full Text Available Working sheepdog trials test the attributes of dogs as well as the dogmanship and stockmanship skills of handlers. They generally include standard elements such as outrun, lift, fetch, drive, shed, pen and single to test all facets of the work that dogs perform on a farm. While both male and female handlers participate, these trials are traditionally dominated by male handlers. Both male and female dogs compete on equal terms within the same events. Drawing data from files (n = 60 downloaded from YouTube, the current study explores whether behaviours of dogs and their handlers during sheepdog trials differ between handler gender and dog sex at different levels of competition. It compared the stalking, crouching, chasing and stationary behaviours of dogs in open (n = 28 dogs: 10 females, 18 males and not-open trials (n = 32 dogs: 20 females, 12 males. The dogs in this study had male (n = 38 and female (n = 22 handlers, whose movement and use of vocal cues and arm elevations were also compared. However, the small sample size and limitations of these videos as a data source should be noted before the results are generalised to the broader field of working-dog behaviour. The results of an REstricted Maximum Likelihood test showed that male handlers spent, on average, significantly more time in the fetch and drive elements than female handlers, but this difference between sexes was present only in not-open events (mean time to Fetch, female handler = 44.07s, male handler = 124.00s, P<0.001, mean time to Drive, female handler = 95.8s, male handler = 152.4, P = 0.010. This may suggest that female handlers of less experienced dogs are better at the early training of these elements. The results showed that male dogs spent more time stationary than female dogs, but only in open competition (male dog predicted mean 6.17s, P = 0.014. Revealing differences between men/women, and between dogs/bitches in this context may identify pairings that complement each

  19. Role of Food Handlers in Norovirus Outbreaks in London and South East England, 2013 to 2015.

    Science.gov (United States)

    Rumble, C; Addiman, S; Balasegaram, S; Chima, K; Ready, D; Heard, J; Alexander, E

    2017-02-01

    Outbreaks caused by norovirus infection are common and occur throughout the year. Outbreaks can be related to food outlets either through a contaminated food source or an infected food handler. Both asymptomatic and symptomatic food handlers are potentially implicated in outbreaks, but evidence of transmission is limited. To understand potential food handler transmission in outbreak scenarios, epidemiological and microbiological data on possible and confirmed norovirus outbreaks reported in London and South East England in a 2-year period were reviewed. One hundred eighty-six outbreaks were associated with a food outlet or registered caterer in this period. These occurred throughout the year with peaks in quarter 1 of study years. A case series of 17 outbreaks investigated by the local field epidemiological service were evaluated further, representing more than 606 cases. In five outbreaks, symptomatic food handlers were tested and found positive for norovirus. In four outbreaks, symptomatic food handlers were not tested. Asymptomatic food handlers were tested in three outbreaks but positive for norovirus in one only. Environmental sampling did not identify the causative agent conclusively in any of the outbreaks included in this analysis. Food sampling identified norovirus in one outbreak. Recommendations from this study include for outbreak investigations to encourage testing of symptomatic food handlers and for food and environmental samples to be taken as soon as possible. In addition, sampling of asymptomatic food handlers should be considered when possible. However, in light of the complexity in conclusively identifying a source of infection, general measures to improve hand hygiene are recommended, with specific education among food handlers about the potential for foodborne pathogen transmission during asymptomatic infection, as well as reinforcing the importance of self-exclusion from food handling activities when symptomatic.

  20. Effect of frying instructions for food handlers on acrylamide concentration in French fries: an explorative study.

    Science.gov (United States)

    Sanny, M; Luning, P A; Jinap, S; Bakker, E J; van Boekel, M A J S

    2013-03-01

    The objective of this study was to obtain insight into the effect of frying instructions on food handlers' control decisions in restaurants and to investigate the impact of control decisions on the variation and concentration of acrylamide in French fries. The concentrations of acrylamide and reducing sugars were analyzed, the frying temperature and time were measured, and thawing practices were observed. The results obtained before and after instructions were provided to the food handlers were compared for restaurants as a group and for each restaurant. Frying instructions supported food handlers' decisions to start frying when the oil temperature reached 175°C; all handlers started frying at the correct temperature. However, the effect of the instructions on the food handlers' decisions for frying time differed; most handlers increased the frying time beyond 240 s to achieve crispier French fries with a final color dictated by their preference. Providing instructions did not result in a significant difference in the mean concentration of acrylamide in French fries for the restaurants as a group. However, data analyzed for each restaurant revealed that when food handlers properly followed the instructions, the mean concentration of acrylamide was significantly lower (169 μg/kg) than that before instructions were provided (1,517 μg/kg). When food handlers did not complying with the frying instructions, mean acrylamide concentrations were even higher than those before instructions were provided. Two different strategies were developed to overcome the noncompliant behavior of food handlers: establishing requirements for the features of commercial fryers and strict monitoring of compliance with instructions.

  1. Device Configuration Handler for Accelerator Control Applications at Jefferson Lab

    International Nuclear Information System (INIS)

    Bickley, Matt; Chevtsov, P.; Larrieu, T.

    2003-01-01

    The accelerator control system at Jefferson Lab uses hundreds of physical devices with such popular instrument bus interfaces as Industry Pack (IPAC), GPIB, RS-232, etc. To properly handle all these components, control computers (IOCs) must be provided with the correct information about the unique memory addresses of the used interface cards, interrupt numbers (if any), data communication channels and protocols. In these conditions, the registration of a new control device in the control system is not an easy task for software developers. Because the device configuration is distributed, it requires the detailed knowledge about not only the new device but also the configuration of all other devices on the existing system. A configuration handler implemented at Jefferson Lab centralizes the information about all control devices making their registration user-friendly and very easy to use. It consists of a device driver framework and the device registration software developed on the basis of ORACLE database and freely available scripting tools (perl, php)

  2. Notes on the Mesh Handler and Mesh Data Conversion

    International Nuclear Information System (INIS)

    Lee, Sang Yong; Park, Chan Eok

    2009-01-01

    At the outset of the development of the thermal-hydraulic code (THC), efforts have been made to utilize the recent technology of the computational fluid dynamics. Among many of them, the unstructured mesh approach was adopted to alleviate the restriction of the grid handling system. As a natural consequence, a mesh handler (MH) has been developed to manipulate the complex mesh data from the mesh generator. The mesh generator, Gambit, was chosen at the beginning of the development of the code. But a new mesh generator, Pointwise, was introduced to get more flexible mesh generation capability. An open source code, Paraview, was chosen as a post processor, which can handle unstructured as well as structured mesh data. Overall data processing system for THC is shown in Figure-1. There are various file formats to save the mesh data in the permanent storage media. A couple of dozen of file formats are found even in the above mentioned programs. A competent mesh handler should have the capability to import or export mesh data as many as possible formats. But, in reality, there are two aspects that make it difficult to achieve the competence. The first aspect to consider is the time and efforts to program the interface code. And the second aspect, which is even more difficult one, is the fact that many mesh data file formats are proprietary information. In this paper, some experience of the development of the format conversion programs will be presented. File formats involved are Gambit neutral format, Ansys-CFX grid file format, VTK legacy file format, Nastran format and CGNS

  3. [Cryptosporidium sp infections and other intestinal parasites in food handlers from Zulia state, Venezuela].

    Science.gov (United States)

    Freites, Azael; Colmenares, Deisy; Pérez, Marly; García, María; Díaz de Suárez, Odelis

    2009-03-01

    Cryptosporidiosis in food handlers from Venezuela is unknown, being this an important public health problem in immunosuppressed patients. To determine the prevalence of Cryptosporidium sp and other intestinal parasites in food handlers from Zulia State, one hundred nineteen fecal samples were evaluated by wet mount, concentrated according to Ritchie and modified Ziehl-Neelsen staining. Fourteen (11.8%) were positive for Cryptosporidium sp and associated with other protozoosis (P Entamoeba coli (17.6%). The most frequent pathogenic protozoa was Giardia lamblia (13.4%), followed by the complex Entamoeba histolytica/E. dispar (9.2%). 4.1% were positive for intestinal helminthes. The infection by Cryptosporidium sp is frequent in food handlers from Zulia State. Given to the results of this investigation and the nonexistence of studies in this population, is necessary to deepen in the impact of this parasitism in food handlers and the consumers of their products.

  4. Kitchen safety in hospitals: practices and knowledge of food handlers in istanbul, Turkey.

    Science.gov (United States)

    Ercan, Aydan; Kiziltan, Gul

    2014-10-01

    This study was designed to identify the practices and knowledge of food handlers about workplace safety in hospital kitchens (four on-premises and eight off-premises) in Istanbul. A kitchen safety knowledge questionnaire was administered and a kitchen safety checklist was completed by dietitians. The mean total scores of the on-premise and off-premise hospital kitchens were 32.7 ± 8.73 and 37.0 ± 9.87, respectively. The mean scores for the items about machinery tools, electricity, gas, and fire were lower in off-premise than on-premise hospital kitchen workers. The kitchen safety knowledge questionnaire had five subsections; 43.7% of the food handlers achieved a perfect score. Significant differences were found in the knowledge of food handlers working in both settings about preventing slips and falls (p kitchen safety knowledge of the food handlers (p < .05). Copyright 2014, SLACK Incorporated.

  5. [PICS: pharmaceutical inspection cooperation scheme].

    Science.gov (United States)

    Morénas, J

    2009-01-01

    The pharmaceutical inspection cooperation scheme (PICS) is a structure containing 34 participating authorities located worldwide (October 2008). It has been created in 1995 on the basis of the pharmaceutical inspection convention (PIC) settled by the European free trade association (EFTA) in1970. This scheme has different goals as to be an international recognised body in the field of good manufacturing practices (GMP), for training inspectors (by the way of an annual seminar and experts circles related notably to active pharmaceutical ingredients [API], quality risk management, computerized systems, useful for the writing of inspection's aide-memoires). PICS is also leading to high standards for GMP inspectorates (through regular crossed audits) and being a room for exchanges on technical matters between inspectors but also between inspectors and pharmaceutical industry.

  6. Serological evidence of hepatitis E virus infection in pigs and jaundice among pig handlers in Bangladesh.

    Science.gov (United States)

    Haider, N; Khan, M S U; Hossain, M B; Sazzad, H M S; Rahman, M Z; Ahmed, F; Zeidner, N S

    2017-11-01

    Hepatitis E virus (HEV) is the most common cause of viral hepatitis in humans. Pigs may act as a reservoir of HEV, and pig handlers were frequently identified with a higher prevalence of antibodies to HEV. The objectives of this study were to identify evidence of HEV infection in pigs and compare the history of jaundice between pig handlers and people not exposed to pigs and pork. Blood and faecal samples were collected from 100 pigs derived from three slaughterhouses in the Gazipur district of Bangladesh from January to June, 2011. We also interviewed 200 pig handlers and 250 non-exposed people who did not eat pork or handled pigs in the past 2 years. We tested the pig sera for HEV-specific antibodies using a competitive ELISA and pig faecal samples for HEV RNA using real-time RT-PCR. Of 100 pig sera, 82% (n = 82) had detectable antibody against HEV. Of the 200 pig handlers, 28% (56/200) demonstrated jaundice within the past 2 years, whereas only 17% (43/250) of controls had a history of jaundice (p Bangladesh demonstrated evidence of HEV infection, and a history of jaundice was significantly more frequent in pig handlers. Identifying and genotyping HEV in pigs and pig handlers may provide further evidence of the pig's role in zoonotic HEV transmission in Bangladesh. © 2017 Blackwell Verlag GmbH.

  7. 46 CFR 167.60-1 - Issuance by Officer in Charge, Marine Inspection.

    Science.gov (United States)

    2010-10-01

    ... SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Certificates of Inspection § 167.60-1 Issuance by Officer in Charge, Marine Inspection. (a) Every nautical school ship shall be inspected annually and if in the opinion of the Officer in Charge, Marine Inspection, the nautical school ship can be operated safely, he shall...

  8. Development of an advanced rocket propellant handler's suit

    Science.gov (United States)

    Doerr, D. F.

    2001-01-01

    Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (rights reserved.

  9. Development of an advanced rocket propellant handler's suit

    Science.gov (United States)

    Doerr, DonaldF.

    2001-08-01

    Most launch vehicles and satellites in the US inventory rely upon the use of hypergolic rocket propellants, many of which are toxic to humans. These fuels and oxidizers, such as hydrazine and nitrogen tetroxide have threshold limit values as low as 0.01 PPM. It is essential to provide space workers handling these agents whole body protection as they are universally hazardous not only to the respiratory system, but the skin as well. This paper describes a new method for powering a whole body protective garment to assure the safety of ground servicing crews. A new technology has been developed through the small business innovative research program at the Kennedy Space Center. Currently, liquid air is used in the environmental control unit (ECU) that powers the propellant handlers suit (PHE). However, liquid air exhibits problems with attitude dependence, oxygen enrichment, and difficulty with reliable quantity measurement. The new technology employs the storage of the supply air as a supercritical gas. This method of air storage overcomes all of three problems above while maintaining high density storage at relatively low vessel pressures (protective ensemble marked an advancement in the state-of-the-art in personal protective equipment. Not only was long duration environmental control provided, but it was done without a high pressure vessel. The unit met human performance needs for attitude independence, oxygen stability, and relief of heat stress. This supercritical air (and oxygen) technology is suggested for microgravity applications in life support such as the Extravehicular Mobility Unit.

  10. Refining SCJ Mission Specifications into Parallel Handler Designs

    Directory of Open Access Journals (Sweden)

    Frank Zeyda

    2013-05-01

    Full Text Available Safety-Critical Java (SCJ is a recent technology that restricts the execution and memory model of Java in such a way that applications can be statically analysed and certified for their real-time properties and safe use of memory. Our interest is in the development of comprehensive and sound techniques for the formal specification, refinement, design, and implementation of SCJ programs, using a correct-by-construction approach. As part of this work, we present here an account of laws and patterns that are of general use for the refinement of SCJ mission specifications into designs of parallel handlers used in the SCJ programming paradigm. Our notation is a combination of languages from the Circus family, supporting state-rich reactive models with the addition of class objects and real-time properties. Our work is a first step to elicit laws of programming for SCJ and fits into a refinement strategy that we have developed previously to derive SCJ programs.

  11. Survey of nasal carriage of Staphylococcus aureus and intestinal parasites among food handlers working at Gondar University, Northwest Ethiopia.

    Science.gov (United States)

    Dagnew, Mulat; Tiruneh, Moges; Moges, Feleke; Tekeste, Zinaye

    2012-10-02

    Food borne disease are major health problems in developing countries like Ethiopia. Food handlers with poor personal hygiene working in food establishments could be potential sources of disease due to pathogenic organisms. However; information on disease prevalence among food handlers working in University of Gondar cafeterias are very scarce. The aim of this study is to assess the prevalence of nasal carriage of Staphylococcus aureus, their drug resistance pattern and prevalence of intestinal parasites among food handlers working in University of Gondar student's cafeterias. A cross sectional study was conducted among food handlers working in University of Gondar student's cafeterias. A pretested structured questionnaire was used for collecting data. Nasal swab and stool were investigated for S. aureus and intestinal parasites; respectively as per the standard of the laboratory methods. Among 200 food handlers, females comprised 171(85.5%). The majority (67.5%) of the food-handlers were young adults aged 18-39 years. One hundred ninety four (97%) of the food handlers were not certified as a food handler. Forty one (20.5%) food handlers were positive for nasal carriage of S. aureus, of these 4(9.8%) was resistant for methicilin. Giardia lamblia was the most prevalent parasites 22 (11%), followed by Ascaris lumbricoides 13(6.5%), Entamoeba histolytica 12 (6%), Strongyloides stercolaris (0.5), Taenia species 1(0.5%) and Schistosoma mansoni 1(0.5%). The finding stressed that food handlers with different pathogenic micro organisms may pose significant risk on the consumers. Higher officials should implement food handler's training on food safety, periodic medical checkup and continuous monitoring of personal hygiene of food handlers.

  12. Prevalence of bacteria and intestinal parasites among food-handlers in Gondar town, northwest Ethiopia.

    Science.gov (United States)

    Andargie, Gashaw; Kassu, Afework; Moges, Feleke; Tiruneh, Moges; Huruy, Kahsay

    2008-12-01

    Food-handlers with poor personal hygiene working in food-service establishments could be potential sources of infection due to pathogenic organisms. The study was undertaken to determine the prevalence of bacteria and intestinal parasites among 127 food-handlers working in the cafeterias of the University of Gondar and the Gondar Teachers Training College, Gondar, Ethiopia. Fingernail contents of both the hands and stool specimens were collected from all the 127 food-handlers. The samples were examined for bacteria and intestinal parasites following standard procedures. Coagulase-negative staphylococci were the predominant bacteria species (41.7%) isolated from fingernail contents, followed by Staphylococcus aureus (16.5%), Klebsiella species (5.5%), Escherichia coli (3.1%), Serratia species (1.58%), Citrobacter species (0.8%), and Enterobacter species (0.8%). Shigella species were isolated from stool samples of four food-handlers (3.1%). None of the food-handlers was positive for Salmonella species and Shigella species in respect of their fingernail contents. No intestinal parasites were detected from fingernail contents. Intestinal parasites detected in the stools of the food-handlers included Ascaris lumbricoides (18.11%), Strongyloides stercoralis (5.5%), Entamoeba histolytica/dispar (1.6%), Trichuris trichiura (1.6%), hookworm species (0.8%), Gardia lamblia (0.8%), and Schistosoma mansoni (0.8%); 1.6% of the study subjects were positive for each of A. lumbricoides, T. trichiura, hookworm, and G. lamblia. The findings emphasize the importance of food-handlers as potential sources of infections and suggest health institutions for appropriate hygienic and sanitary control measures.

  13. Prevalence and predictors of intestinal parasites among food handlers in Yebu Town, southwest Ethiopia.

    Science.gov (United States)

    Tefera, Tamirat; Mebrie, Getye

    2014-01-01

    As a result of urbanization, eating and drinking from food service establishments is becoming a common practice in developing countries like Ethiopia, which increases the chances of food borne diseases. The health status and hygiene practices of food handlers are the major determinants of food contamination. In developing countries where there are poor regulatory systems for food hygiene, food handlers are often appointed without screening for possible infections associated with poor hygiene like intestinal parasites. This study aimed at determining the prevalence and predictors of intestinal parasites and assessing the hygiene practices among food handlers in Yebu Town, southwest Ethiopia. A cross-sectional study was conducted among a total of 118 food handlers in Yebu Town in January 2011. Fresh stool specimens were collected and processed using both direct wet mount and Formol ether concentration techniques. The overall prevalence of intestinal parasites among the study subjects was 44.1% (52/118). Ascaris lumbricoides and hookworm spp were the predominant parasites identified from the stool of study participants. Age above 35 years (AOR: 4.8, 95% CI: 1.1, 21.8), no regular practice of washing hands before a meal (AOR: 7.8, 95% CI: 2.8, 24.8), and untrimmed finger nail (AOR: 14.7, 95% CI: 2.8, 75.4) were independent predictors of intestinal parasitic infection among the food handlers. The present study showed high prevalence of intestinal parasites among the study subjects. The study also revealed poor personal hygiene like poor practice of hand washing and poor finger nail hygiene. Therefore, much has to be done to improve the personal hygiene of the food handlers. Pre-placement and periodic screening of food handlers for parasites and prompt treatment, and health education on regular trimming or cleaning of fingernails would be the way forward for prevention of food borne diseases.

  14. Prevalence and predictors of intestinal parasites among food handlers in Yebu Town, southwest Ethiopia.

    Directory of Open Access Journals (Sweden)

    Tamirat Tefera

    Full Text Available As a result of urbanization, eating and drinking from food service establishments is becoming a common practice in developing countries like Ethiopia, which increases the chances of food borne diseases. The health status and hygiene practices of food handlers are the major determinants of food contamination. In developing countries where there are poor regulatory systems for food hygiene, food handlers are often appointed without screening for possible infections associated with poor hygiene like intestinal parasites.This study aimed at determining the prevalence and predictors of intestinal parasites and assessing the hygiene practices among food handlers in Yebu Town, southwest Ethiopia.A cross-sectional study was conducted among a total of 118 food handlers in Yebu Town in January 2011. Fresh stool specimens were collected and processed using both direct wet mount and Formol ether concentration techniques.The overall prevalence of intestinal parasites among the study subjects was 44.1% (52/118. Ascaris lumbricoides and hookworm spp were the predominant parasites identified from the stool of study participants. Age above 35 years (AOR: 4.8, 95% CI: 1.1, 21.8, no regular practice of washing hands before a meal (AOR: 7.8, 95% CI: 2.8, 24.8, and untrimmed finger nail (AOR: 14.7, 95% CI: 2.8, 75.4 were independent predictors of intestinal parasitic infection among the food handlers.The present study showed high prevalence of intestinal parasites among the study subjects. The study also revealed poor personal hygiene like poor practice of hand washing and poor finger nail hygiene. Therefore, much has to be done to improve the personal hygiene of the food handlers. Pre-placement and periodic screening of food handlers for parasites and prompt treatment, and health education on regular trimming or cleaning of fingernails would be the way forward for prevention of food borne diseases.

  15. 2011 Annual Criticality Safety Program Performance Summary

    Energy Technology Data Exchange (ETDEWEB)

    Andrea Hoffman

    2011-12-01

    The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection, an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The

  16. Food safety knowledge, attitudes and practices of institutional food-handlers in Ghana.

    Science.gov (United States)

    Akabanda, Fortune; Hlortsi, Eli Hope; Owusu-Kwarteng, James

    2017-01-06

    In large scale cooking, food is handled by many individuals, thereby increasing the chances of food contamination due to improper handling. Deliberate or accidental contamination of food during large scale production might endanger the health of consumers, and have very expensive repercussions on a country. The purpose of this study was to evaluate the food safety knowledge, attitudes, and practices among institutional food- handlers in Ghana. The study was conducted using a descriptive, cross-sectional survey of 29 institutions by conducting face to face interview and administration of questionnaire to two hundred and thirty-five (235) institutional food-handlers. The questionnaire was peer-reviewed and pilot tested in three institutions in the Upper East Region of Ghana, before the final version was distributed to food-handlers. The questionnaire was structured into five distinctive parts to collect information on (i) demographic characteristics, (ii) employees' work satisfaction, (iii) knowledge on food safety, (iv) attitudes towards food safety and (v) food hygiene practices. Majority of the food-handlers were between 41-50 years (39.1%). Female respondents were (76.6%). In our study, the food-handlers were knowledgeable about hygienic practices, cleaning and sanitation procedures. Almost all of the food-handlers were aware of the critical role of general sanitary practices in the work place, such as hand washing (98.7% correct answers), using gloves (77.9%), proper cleaning of the instruments/utensils (86.4%) and detergent use (72.8%). On disease transmission, the results indicates that 76.2% of the food- handlers did not know that Salmonella is a food borne pathogens and 70.6% did not know that hepatitis A is a food borne pathogen. However, 81.7% handlers agreed that typhoid fever is transmitted by food and 87.7% agreed that bloody diarrhea is transmitted by food. Logistic regression analysis testing four models showed statistically significant differences

  17. Food safety knowledge, attitudes and practices of institutional food-handlers in Ghana

    Directory of Open Access Journals (Sweden)

    Fortune Akabanda

    2017-01-01

    Full Text Available Abstract Background In large scale cooking, food is handled by many individuals, thereby increasing the chances of food contamination due to improper handling. Deliberate or accidental contamination of food during large scale production might endanger the health of consumers, and have very expensive repercussions on a country. The purpose of this study was to evaluate the food safety knowledge, attitudes, and practices among institutional food- handlers in Ghana. Methods The study was conducted using a descriptive, cross-sectional survey of 29 institutions by conducting face to face interview and administration of questionnaire to two hundred and thirty-five (235 institutional food-handlers. The questionnaire was peer-reviewed and pilot tested in three institutions in the Upper East Region of Ghana, before the final version was distributed to food-handlers. The questionnaire was structured into five distinctive parts to collect information on (i demographic characteristics, (ii employees’ work satisfaction, (iii knowledge on food safety, (iv attitudes towards food safety and (v food hygiene practices. Results Majority of the food-handlers were between 41–50 years (39.1%. Female respondents were (76.6%. In our study, the food-handlers were knowledgeable about hygienic practices, cleaning and sanitation procedures. Almost all of the food-handlers were aware of the critical role of general sanitary practices in the work place, such as hand washing (98.7% correct answers, using gloves (77.9%, proper cleaning of the instruments/utensils (86.4% and detergent use (72.8%. On disease transmission, the results indicates that 76.2% of the food- handlers did not know that Salmonella is a food borne pathogens and 70.6% did not know that hepatitis A is a food borne pathogen. However, 81.7% handlers agreed that typhoid fever is transmitted by food and 87.7% agreed that bloody diarrhea is transmitted by food. Logistic regression analysis testing four models

  18. 1997 Annual report

    International Nuclear Information System (INIS)

    1997-01-01

    This annual report present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1997. The activities are developed in 11 chapters and 1 appendix, were are descripting the activities and the bases of the Argentine Regulatory System. The following chapters and the appendix are: 1.-Evolution of the nuclear regulatory activities in the Argentina. 2.-Regulatory system, laws and regulations. 3.-Institutional relations with national and international organizations. 4.-Inspections and evaluations of the nuclear reactors. 5.-Inspections and evaluations of the radioactive facilities. 6.-Inspections and evaluations of safeguards and physical protection. 7.-Radiation control of the occupational and public doses. 8.-Radiological emergencies. 9.-Projects and tasks scientific-technological. 10.-Training courses and meetings. 11.-Economic and human recourses. Appendix.- Inspections of radioactive facilities

  19. Survey of nasal carriage of Staphylococcus aureus and intestinal parasites among food handlers working at Gondar University, Northwest Ethiopia

    Directory of Open Access Journals (Sweden)

    Dagnew Mulat

    2012-10-01

    Full Text Available Abstract Background Food borne disease are major health problems in developing countries like Ethiopia. Food handlers with poor personal hygiene working in food establishments could be potential sources of disease due to pathogenic organisms. However; information on disease prevalence among food handlers working in University of Gondar cafeterias are very scarce. The aim of this study is to assess the prevalence of nasal carriage of Staphylococcus aureus, their drug resistance pattern and prevalence of intestinal parasites among food handlers working in University of Gondar student’s cafeterias. Method A cross sectional study was conducted among food handlers working in University of Gondar student’s cafeterias. A pretested structured questionnaire was used for collecting data. Nasal swab and stool were investigated for S. aureus and intestinal parasites; respectively as per the standard of the laboratory methods. Results Among 200 food handlers, females comprised 171(85.5%. The majority (67.5% of the food-handlers were young adults aged 18–39 years. One hundred ninety four (97% of the food handlers were not certified as a food handler. Forty one (20.5% food handlers were positive for nasal carriage of S. aureus, of these 4(9.8% was resistant for methicilin. Giardia lamblia was the most prevalent parasites 22 (11%, followed by Ascaris lumbricoides 13(6.5%, Entamoeba histolytica 12 (6%, Strongyloides stercolaris (0.5, Taenia species 1(0.5% and Schistosoma mansoni 1(0.5%. Conclusion The finding stressed that food handlers with different pathogenic micro organisms may pose significant risk on the consumers. Higher officials should implement food handler’s training on food safety, periodic medical checkup and continuous monitoring of personal hygiene of food handlers.

  20. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  1. A simple method for validation and verification of pipettes mounted on automated liquid handlers

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Hansen, Anders Johannes; Frøslev, Tobias Guldberg

     We have implemented a simple method for validation and verification of the performance of pipettes mounted on automated liquid handlers as necessary for laboratories accredited under ISO 17025. An 8-step serial dilution of Orange G was prepared in quadruplicates in a flat bottom 96-well microtit...... available. In conclusion, we have set up a simple solution for the continuous validation of automated liquid handlers used for accredited work. The method is cheap, simple and easy to use for aqueous solutions but requires a spectrophotometer that can read microtiter plates....... We have implemented a simple method for validation and verification of the performance of pipettes mounted on automated liquid handlers as necessary for laboratories accredited under ISO 17025. An 8-step serial dilution of Orange G was prepared in quadruplicates in a flat bottom 96-well microtiter...

  2. Explaining the food safety behaviours of food handlers using theories of behaviour change: a systematic review.

    Science.gov (United States)

    Young, Ian; Thaivalappil, Abhinand; Greig, Judy; Meldrum, Richard; Waddell, Lisa

    2018-06-01

    Theories of behaviour change can explain the factors affecting food handlers' use of food safety practices. A systematic review was conducted on this topic to identify which theories have been applied in this area and to determine which theories are the most consistent predictors of food handlers' behaviours. Standard systematic review procedures were followed: comprehensive search strategy; relevance screening of abstracts; article characterization; data extraction; risk-of-bias assessment; and descriptive analysis. Among 19 relevant studies, the most commonly investigated theories were the Theory of Planned Behaviour (n = 9 studies) and Health Belief Model (n = 5). All investigated theories were useful to explain food handlers' behavioural intentions and behaviours related to food safety across different settings, and could serve as useful frameworks for future research and practice. However, there was wide variability in the predictive ability of the theories and their specific constructs, indicating theories should be adapted to the local context of application.

  3. 7 CFR 301.92-11 - Inspection and sampling protocols.

    Science.gov (United States)

    2010-01-01

    ... determinations of apparent pest freedom for such nurseries must occur at the time when the best expression of... associated articles and nearby plants. Inspectors must conduct inspections at times when the best expression... annually for symptoms of Phytophthora ramorum. Inspections and determinations of freedom from evidence of...

  4. 38 CFR 39.122 - Inspections, audits, and reports.

    Science.gov (United States)

    2010-07-01

    ...-16-10) Forms Award of Grant § 39.122 Inspections, audits, and reports. Pt. 40 (a) A State will allow... Single Audit Act of 1984 (see part 41 of this chapter). (b) A State will make an annual report on VA Form... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Inspections, audits, and...

  5. Automated Inspection of Aircraft

    Science.gov (United States)

    1998-04-01

    This report summarizes the development of a robotic system designed to assist aircraft inspectors by remotely deploying non-destructive inspection (NDI) sensors and acquiring, processing, and storing inspection data. Carnegie Mellon University studie...

  6. Optimising import phytosanitary inspection

    NARCIS (Netherlands)

    Surkov, I.

    2007-01-01

    Keywords: quarantine pest, plant health policy, optimization, import phytosanitary inspection, ‘reduced checks’, optimal allocation of resources, multinomial logistic regression, the Netherlands World trade is a major vector of spread of quarantine plant pests. Border phytosanitary inspection

  7. Event Handler II: a fast, programmable, CAMAC-coupled data acquisition interface

    International Nuclear Information System (INIS)

    Hensley, D.C.

    1979-01-01

    The architecture of the Event Handler II, a fast, programmable data acquisition interface linked to and through CAMAC is described. The special features of this interface make it a powerful tool in implementing data acquisition systems for experiments in nuclear physics. 1 figure, 1 table

  8. Intervention strategies for the reduction of microbiological contamination on the hands of food handlers

    Directory of Open Access Journals (Sweden)

    Naína Lopes de JESUS

    Full Text Available Abstract The purpose of this study was to evaluate intervention strategies for the reduction of microbiological contamination on the hands of food handlers. The study was conducted from January 2009 to December 2014 at a food and nutrition company in Curitiba, Brazil. Samples from the hands of 877 handlers were collected for microbiological analysis. The intervention strategies applied during each year were: 2009, substitute the use of odorless liquid soap and an antiseptic product by one product; 2010, was increasing the staff of technical supervisors and conducting biannual training; 2011 was to move the lavatories for handwashing, and the use of 70% alcohol gel; 2012, was to increase the frequency of the training of food handlers; 2013, was new weekly monitoring, to evaluation of the use of bactericide soap; 2013 and 2014 was implemented an internal program to verify food production. The intervention introduced in 2011 the 2012 and 2013 the 2014 reduced the contamination of the hands of food handlers. The use of 70% alcohol gel, the moving of the location of the lavatories, weekly monitoring of the use of bactericide soap and implementation of the internal program, were the strategies that contributed the most to the reduction of the microbial.

  9. Effect of frying instructions for food handlers on acrylamide concentration in French Fries: an explorative study

    NARCIS (Netherlands)

    Sanny, M.A.I.; Luning, P.A.; Jinap, S.; Bakker, E.J.; Boekel, van T.

    2013-01-01

    The objective of this study was to obtain insight into the effect of frying instructions on food handlers' control decisions in restaurants and to investigate the impact of control decisions on the variation and concentration of acrylamide in French fries. The concentrations of acrylamide and

  10. Event Handler: a fast programmable, CAMAC-coupled data acquisition interface

    International Nuclear Information System (INIS)

    Hensley, D.C.

    1978-01-01

    The purpose of this paper is to describe the architecture and performance of the Event Handler, a fast, programmable data acquisition interface which is linked to and through CAMAC. The special features of this interface make it a powerful tool in implementing data acquisition systems for experiments in nuclear physics

  11. [Street food: analysis of hygienic and sanitary conditions of food handlers].

    Science.gov (United States)

    de Souza, Giovanna Carbonera; dos Santos, Celso Tadeu Barbosa; Andrade, Anderson Assunção; Alves, Luciene

    2015-08-01

    The consumption of street food is an economical and practical alternative for the population. However, concerns regarding the safety of these foods are increasing. Thus, this study aimed to analyze the hygienic and sanitary conditions of the street food trade in Uberaba in the State of Minas Gerais. For this purpose, 30 street vending sites were evaluated using a structured questionnaire and microbiological analysis of food handlers' hands and food contact recipients and surfaces. The findings showed low adequacy of street food regarding hand hygiene and food contact surfaces. With respect to surfaces, the results for mesophilic aerobic microorganisms revealed that only 23.3% had satisfactory sanitary conditions. The level of contamination of hands by fecal thermotolerant coliforms and/or Coagulase positive Staphylococci was unsatisfactory in approximately 47% of food handlers. The conclusion drawn is that the hygienic and sanitary conditions of food handlers in Uberaba are poor. It is therefore necessary to adopt effective and permanent training programs on food safety for food handlers urgently.

  12. 7 CFR 1000.27 - Handler responsibility for records and facilities.

    Science.gov (United States)

    2010-01-01

    ... make such records and its facilities available to the market administrator. If adequate records of a... and made available, any skim milk and butterfat required to be reported by such handler for which... quantities of skim milk and butterfat contained in, or represented by, products received in any form...

  13. Serological evidence of hepatitis E virus infection in pigs and jaundice among pig handlers in Bangladesh

    DEFF Research Database (Denmark)

    Haider, Najmul; Khan, M. S. U.; Hossain, M. B.

    2017-01-01

    Hepatitis E virus (HEV) is the most common cause of viral hepatitis in humans. Pigs may act as a reservoir of HEV, and pig handlers were frequently identified with a higher prevalence of antibodies to HEV. The objectives of this study were to identify evidence of HEV infection in pigs and compare...

  14. Pathogenic Escherichia coli and food handlers in luxury hotels in Nairobi, Kenya.

    Science.gov (United States)

    Onyango, Abel O; Kenya, Eucharia U; Mbithi, John J N; Ng'ayo, Musa O

    2009-11-01

    The epidemiology and virulence properties of pathogenic Escherichia coli among food handlers in tourist destination hotels in Kenya are largely uncharacterized. This cross-sectional study among consenting 885 food handlers working in nine luxurious tourist hotels in Nairobi, Kenya determined the epidemiology, virulence properties, antibiotics susceptibility profiles and conjugation abilities of pathogenic Escherichia coli. Pathogenic Escherichia coli was detected among 39 (4.4%) subjects, including 1.8% enteroaggregative Escherichia coli (EAEC) harboring aggR genes, 1.2% enterotoxigenic Escherichia coli (ETEC) expressing both LT and STp toxins, 1.1% enteropathogenic Escherichia coli (EPEC) and 0.2% Shiga-like Escherichia coli (EHEC) both harboring eaeA and stx2 genes respectively. All the pathotypes had increased surface hydrophobicity. Using multivariate analyses, food handlers with loose stools were more likely to be infected with pathogenic Escherichia coli. Majority 53.8% of the pathotypes were resistant to tetracycline with 40.2% being multi-drug resistant. About 85.7% pathotypes trans-conjugated with Escherichia coli K12 F(-) NA(r) LA. The carriage of multi-drug resistant, toxin expressing pathogenic Escherichia coli by this population is of public health concern because exposure to low doses can result in infection. Screening food handlers and implementing public awareness programs is recommended as an intervention to control transmission of enteric pathogens.

  15. Microbiological and parasitological investigation among food handlers in hotels in the Dead Sea area, Jordan.

    Science.gov (United States)

    Abdel-Dayem, Muna; Al Zou'bi, Renad; Hani, Rehan Bani; Amr, Zuhair Sami

    2014-10-01

    Intestinal parasitic and bacterial infections constitute a major health issue in developing countries. The present study investigates and assesses infection rates among food handlers with intestinal parasites and microbial agents in luxurious hotels in the Dead Sea area of Jordan. A total of 901 stool samples were collected from food handlers (35 females and 866 males) employed in four main hotels in the Dead Sea area. Fecal samples were examined microscopically for intestinal parasites. Standard culture and biochemical techniques were used for the isolation and identification of Salmonella and Shigella spp. in stool samples. Five species of protozoan (Blastocystis hominis, Giardia intestinalis, Entamoeba coli, Entamoeba histolytica, and Endolimax nana), one helminth (Hymenolepis nana), and one cylindrical worm (Enterobius vermicularis) were recovered with an overall infection rate of 3.7%. G. intestinalis was the most prevalent parasitic infection with infection rate of 2.44%. All samples were negative for both Salmonella and Shigella. Findings highlight the important role of food handlers in the transmission of intestinal parasites to high-class clients accommodated in luxury hotels, and stress the urgent need for regular health and parasitologic examination of food handlers. Copyright © 2013. Published by Elsevier B.V.

  16. Technical objectives of inspection

    International Nuclear Information System (INIS)

    Sorenson, R.J.; Stewart, K.B.; Schneider, R.A.

    1976-01-01

    The various technical objectives of inspection are discussed in a very general manner. The discussion includes how the inspection function is related to the assumed threat, the various degrees of assurance and reliance on criteria, and the hierarchy of assurance which is obtained from the various types or levels of inspection

  17. Software Formal Inspections Guidebook

    Science.gov (United States)

    1993-01-01

    The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

  18. Contamination of Ethiopian paper currency notes from various food handlers with E. coli.

    Science.gov (United States)

    Hiko, Adem; Abdata, Kasahun; Muktar, Yimer; Woyesa, Mezene; Mohammed, Abdela

    2016-01-01

    Contamination rate of Ethiopian paper currency notes handled by various food handlers with Escherichia coli and antimicrobial susceptibility of the isolates was assessed. A total of 384 Ethiopian Birr (ETB) notes were randomly sampled from meat handlers at butchers, bread and the related food handlers at cafeteria, fruit and vegetables handlers at supermarket, and milk sellers both at open market and dairy station. Fifty control new currencies were also sampled from Commercial Bank of Ethiopia. Both surfaces of the currency were swabbed using wet sterile cotton. The swab was overnight incubated in buffered peptone water. A loop full was streaked on eosin methylene blue agar and followed by biochemical test on presumptive E. coli colonies. Randomly selected isolates were exposed to chloramphenicol (C-30 µg), neomycin (N-30 µg), oxytetracycline (OT-30 µg), polymyxin-B (PB-300 IU) and trimethoprim-sulfamethoxazole (SXT-1.25/23.75/µg) susceptibility using disc diffusion techniques. E. coli was not isolated from currency used as control. A total of 288 (75 %) currency notes were found carrying E. coli. E. coli prevalence was ranges from 67.2 % at open market milk sellers to 87.2 % at dairy station milk sellers; from 64.8 % on ETB 100 to 82.9 % on ETB 1. Differences were not observed in E. coli prevalence on currency notes from among almost all food handlers (P > 0.05). Susceptibility of tested isolates to each chloramphenicol, oxytetracycline and trimethoprim-sulfamethoxazole was 100 %, and to polymyxin-B was 97.3 %. High resistance (83.7 %) was observed to neomycin. The finding indicates, contaminated food can be a source of E. coli for further contamination of currency which again transfer through various foods ready for consumption.

  19. Prevalence of Intestinal Parasites among Food-handlers in Shiraz, Iran

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein MOTAZEDIAN

    2015-12-01

    Full Text Available Background: Parasitic intestinal infections are still among socioeconomic prob­lems in the world, especially in developing countries like Iran. Food-handlers that directly deal with production and distribution of foods between societies are one of the most important sources to transmit parasitic infections to humans. The aim of this study was to determine the prevalence of intestinal parasitic infections among food-handlers in Shiraz, Iran. Methods: In this cross-sectional study, 1021 feces samples were randomly col­lected from food-handlers in Shiraz, central Iran from August to September 2013. Two different methods, routine direct fecal examination and Formalin –Ethyl ace­tate concentration as a complementary technique, were done to detect parasites.Results: The prevalence of parasitic organisms was 10.4% in the food-handlers. The most species of the protozoan parasites were G. lamblia, E. coli and B. hominis; meanwhile, only one infection by H. nana (0.1% was detected in this group. Mixed infections were observed in 13.2% (n=14/106 of positive cases. The majority of participants were male (57%; however, data analysis showed significant statistical difference in the rate of infection between females 11.9% (n=53/444 and males 9% (n=52/577 (P=0. 024. There was no significant statistical difference in the rate of infection among different educational and occupation groups.Conclusion: Although decreasing of helminthic infections is distinct, but infecting with protozoan parasites is still important in food-handlers. Concentration tech­nique is more useful than direct smear technique, especially for detection parasites in low number. High level of education in our study showed that training courses in this group could be effective in the implementation of control and prevention programs.

  20. 1998 Annual report

    International Nuclear Information System (INIS)

    1999-01-01

    This annual report presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1998. The activities are developed in 11 chapters and 2 appendixes, where are describing the activities and the bases of the Argentine Regulatory System. The following chapters and the appendixes are: 1.-Evolution of the nuclear regulatory activities in the Argentina. 2.-Regulatory system, laws, transport of radioactive materials, safety at the management of radioactive wastes, regulatory documents issued. 3.-Institutional relations with national and international organizations. 4.-Inspections and evaluations of the radiological and nuclear safety. 5.-Inspections and evaluations of safeguards and physical protection. 6.-Occupational surveillance. 7.-Environmental surveillance. 8.-Radiological emergencies. 9.-Scientific and technological activities. 10.-Training and technical information. 11.-Human and economic resources. Appendix 1.-Documents and regulatory licensings. Appendix 2.-Inspections to radioactive facilities

  1. Inspection, maintenance and voyage repair experiene during 10 years operation of the N.S. Savannah

    International Nuclear Information System (INIS)

    Jackson, E.L. Jr.

    1978-01-01

    This paper covers the development and performance of annual inspections on the N.S. Savannah over a 10 year period. Modifications and revisions to the inspection criteria were made during this period without sacrificing the safe performance of the reactor plant. The inspection experience gained during this period provides a information for future safe nuclear ship operations

  2. Randomization of inspections

    International Nuclear Information System (INIS)

    Markin, J.T.

    1989-01-01

    As the numbers and complexity of nuclear facilities increase, limitations on resources for international safeguards may restrict attainment of safeguards goals. One option for improving the efficiency of limited resources is to expand the current inspection regime to include random allocation of the amount and frequency of inspection effort to material strata or to facilities. This paper identifies the changes in safeguards policy, administrative procedures, and operational procedures that would be necessary to accommodate randomized inspections and identifies those situations where randomization can improve inspection efficiency and those situations where the current nonrandom inspections should be maintained. 9 refs., 1 tab

  3. Gentilly 2 steam generators Spring 2000 outage: tubesheet waterlance cleaning and inspection; upper bundle inspection

    International Nuclear Information System (INIS)

    Akeroyd, J.K.; Plante, S.

    2000-01-01

    A review of the secondary side maintenance activities recently completed during the Gentilly 2 Annual Spring 2000 Maintenance Outage. Activities included: 1) Tubesheet intertube waterlance cleaning and visual inspection, 2) First tube support plate, in-bundle visual inspection of the hot leg, and 3) Upper bundle tube support plate visual inspection. A description of the waterlancing and inspection equipment and setup in the RB at Gentilly 2 is provided. Several innovative techniques were successfully employed and yielded savings in critical path duration, labour and personnel radiation dose. These included accessing the SG tubesheet region through one handhole only and sludge removal utilizing the SG blowdown system. Plant personnel judged tubesheet sludge removal successful. Before and after results of the cleaning process along with samples of the visual inspection results are provided. Inspection of the first support plate, which was a repeat of an inspection done in 1997, was conducted along with an in-bundle inspection of the upper tube supports. Results are presented along with a discussion of the implications for future steam generator maintenance. (author)

  4. 2002 Annual report

    International Nuclear Information System (INIS)

    2003-01-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2002. The following activities and developed topic in this report describe: radiation and nuclear safety, safeguards, physical protection, transport of radioactive materials, regulatory guides and standards, inspections, licensing, emergency systems, occupational and environmental surveillance, institutional relations with national and international organizations, training courses, information systems, human and economic resources

  5. 1998 Annual Study Report. Standards development of chemical analysis and non destructive inspection methods for pure titanium metals; 1998 nendo seika hokokusho. Jun chitan no shiken hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This study was conducted to standardize the chemical analysis and non-destructive inspection methods for pure titanium metals of industrial grade. These methods are among those serving bases for international standardization of products. The chemical analysis is aimed at quantitative analysis of trace impurities, in particular, present in pure titanium metals of industrial grade by developing and standardizing the inductively coupled plasma atomic emission spectroscopy, known for its low detectable limit, and, at the same time, spark and glow discharged atomic emission spectrometry as the improved routine analysis methods. These methods, although being used by, e.g., steel makers, have not been standardized because the effects of titanium-peculiar matrix are not elucidated. The non-destructive testing is aimed at standardization of the techniques useful for automatic production lines. More concretely, these include optical methods aided by a laser or CCD camera for plate surface defect inspection, ultrasonic methods for plate internal defect inspection, and pressure differential methods for air-tightness of welded pipes. They have not been used yet for automatic production lines. (NEDO)

  6. Restaurant inspection frequency: The RestoFreq Study.

    Science.gov (United States)

    Medu, Olanrewaju; Turner, Hollie; Cushon, Jennifer A; Melis, Deborah; Rea, Leslie; Abdellatif, Treena; Neudorf, Cory O; Schwandt, Michael

    2017-03-01

    Foodborne illness is an important contributor to morbidity and health system costs in Canada. Using number of critical hazards as a proxy for food safety, we sought to better understand how to improve food safety in restaurants. We compared the current standard of annual inspections to twice-yearly inspections among restaurants "at risk" for food safety infractions. These were restaurants that had three or more elevated-risk inspection ratings in the preceding 36 months. We conducted a two-arm randomized controlled trial between November 2012 and October 2014. The intervention was twice-yearly routine restaurant inspection compared to standard once-yearly routine inspection. Included were all restaurants within Saskatoon Health Region that were assessed as "at risk", with 73 restaurants in the intervention arm and 78 in the control arm. Independent sample t-tests were conducted between groups to compare: i) average number of critical hazards per inspection; and ii) proportion of inspections resulting in a rating indicating an elevated hazard. Over time we noted statistically significant improvements across both study arms, in number of both critical food safety hazards (decreased by 61%) and elevated-risk inspection ratings (decreased by 45%) (p < 0.0001). We observed no significant differences between the two groups pre- or post-intervention. Results suggest increasing the number of annual routine inspections in high-risk restaurants was not associated with a significant difference in measures of compliance with food safety regulations. Findings of this study do not provide evidence supporting increased frequency of restaurant inspection from annually to twice annually.

  7. The personal and general hygiene practices of food handlers in the delicatessen sections of retail outlets in South Africa.

    Science.gov (United States)

    van Tonder, Izanne; Lues, Jan F R; Theron, Maria M

    2007-11-01

    This paper presents data on personal- and general-hygiene knowledge and practices among food handlers in the delicatessens of a major retail group in the Western Cape in South Africa. Food handlers were interviewed by means of a structured questionnaire. Although the majority of food handlers adhered to basic hygiene principles, there is definitely a need for proper and continuous training in personal and general hygiene, not only for food handlers, but also for management. The study reported here is of importance particularly in view of new local regulations governing the application of the hazard analysis and critical control point (HACCP) system. Management is responsible for the implementation of this system, and where supervision is not adequate, the manager of the outlet should intervene to ensure that staff conform to the requirements.

  8. Positive and negative psychological impact after secondary exposure to politically motivated violence among body handlers and rehabilitation workers.

    Science.gov (United States)

    Shiri, Shimon; Wexler, Isaiah D; Alkalay, Yasmin; Meiner, Zeev; Kreitler, Shulamith

    2008-12-01

    The positive and negative psychological impact of secondary exposure to politically motivated violence was examined among body handlers and hospital rehabilitation workers, 2 groups that differed in their proximity and immediacy to violent events. Survivors of politically motivated violence served as a comparison group. Body handlers experienced high levels of positive psychological impact and traumatic stress symptoms. Levels of positive psychological impact among on-scene body handlers were higher than those experienced by rehabilitation workers. Traumatic stress symptoms predicted positive psychological impact among body handlers. These findings indicate that proximity to stressors is associated with higher levels of positive and negative psychological impact. Physical proximity is a major contributory factor to both positive and negative psychological effects of secondary exposure to trauma.

  9. Predictors for Risk Factors for Spread of Avian Influenza Viruses by Poultry Handlers in Live bird markets in Uganda.

    Science.gov (United States)

    Kirunda, H; Mugimba, K K; Erima, B; Mimbe, D; Byarugaba, D K; Wabwire-Mangen, F

    2015-08-01

    Live bird markets (LBMs) are essential for marketing poultry, but have been linked to many outbreaks of avian influenza (AI) and its spread. In Uganda, it has been observed that demographic characteristics of poultry traders/handlers influence activities and decision-making in LBMs. The study investigated the influence of socio-demographic characteristics of poultry handlers: age, sex, religion, educational background, level of income, location of residence and region of operation on 20 potential risk factors for introduction and spread of AI in LBMs. Study sites included 39 LBMs in the four regions of Uganda. Data was collected using a semi-structured questionnaire administered to 424 poultry handlers. We observed that background of education was a predictor for slaughter and processing of poultry in open sites. Location of residence was associated with slaughter of poultry from open sites and selling of other livestock species. Region influenced stacking of cages, inadequate cleaning of cages, feeders and drinkers, and provision of dirty feed and water. Specifically, bird handlers with secondary level of education (OR = 12.9, 95% CI: 2.88-57.4, P < 0.01) were more likely to be involved in open site slaughter of poultry than their counterparts without formal education. Comparatively, urbanite bird handlers were less likely to share poultry equipment (OR = 0.4, 95% CI: 0.22-0.63, P < 0.01) than rural resident handlers. Poultry handlers in Northern were 3.5 times more likely to practise insufficient cleaning of cages (OR = 3.5, 95% CI: 1.52-8.09) compared to those in Central region. We demonstrated that some socio-demographic characteristics of poultry handlers were predictors to risky practices for introduction and spread of AI viruses in LBMs in Uganda. © 2014 Blackwell Verlag GmbH.

  10. A simple method for validation and verification of pipettes mounted on automated liquid handlers

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Hansen, Anders Johannes; Frøslev, Tobias G

    2011-01-01

    We have implemented a simple, inexpensive, and fast procedure for validation and verification of the performance of pipettes mounted on automated liquid handlers (ALHs) as necessary for laboratories accredited under ISO 17025. A six- or seven-step serial dilution of OrangeG was prepared in quadru......We have implemented a simple, inexpensive, and fast procedure for validation and verification of the performance of pipettes mounted on automated liquid handlers (ALHs) as necessary for laboratories accredited under ISO 17025. A six- or seven-step serial dilution of OrangeG was prepared...... are freely available. In conclusion, we have set up a simple, inexpensive, and fast solution for the continuous validation of ALHs used for accredited work according to the ISO 17025 standard. The method is easy to use for aqueous solutions but requires a spectrophotometer that can read microtiter plates....

  11. Sleep Quality of Call Handlers Employed in International Call Centers in National Capital Region of Delhi, India.

    Science.gov (United States)

    Raja, J D; Bhasin, S K

    2016-10-01

    Call center sector in India is a relatively new and fast growing industry driving employment and growth in modern India today. Most international call centers in National Capital Region (NCR) of Delhi operate at odd work hours corresponding to a time suitable fortheir international customers. The sleep quality of call handlers employed in these call centers is in jeopardy owing to their altered sleep schedule. To assess the sleep quality and determine its independent predictors among call handlers employed in international call centers in NCR of Delhi. A cross-sectional questionnaire-based study was conducted on 375 call handlers aged 18-39 years employed in international call centers in NCR of Delhi. Sleep quality was assessed using Athens Insomnia scale along with a pre-tested, structured questionnaire. The mean age of respondents was 24.6 (SD 2.4) years. 78% of participants were male. 83.5% of respondents were unmarried. 44.3% of call handlers were cigarette smokers. Physical ailments were reported by 37% call handlers. 77.6% of call handlers had somesuspicion of insomnia or suspected insomnia; the rest had no sleep problem. Smoking, poor social support, heavy workload, lack of relaxation facility at office, and prolonged travel time to office were independent predictors of sleep quality (pSafeguarding their health becomes an occupational health challenge to public health specialists.

  12. Assessment of Food Safety Knowledge, Attitude, Self-Reported Practices, and Microbiological Hand Hygiene of Food Handlers

    Science.gov (United States)

    Lee, Hui Key; Abdul Halim, Hishamuddin; Thong, Kwai Lin; Chai, Lay Ching

    2017-01-01

    Institutional foodborne illness outbreaks continue to hit the headlines in the country, indicating the failure of food handlers to adhere to safe practices during food preparation. Thus, this study aimed to compare the knowledge, attitude, and self-reported practices (KAP) of food safety assessment and microbiological assessment of food handlers’ hands as an indicator of hygiene practices in food premises. This study involved 85 food handlers working in a university located in Kuala Lumpur, Malaysia. The food safety KAP among food handlers (n = 67) was assessed using a questionnaire; while the hand swabs (n = 85) were tested for the total aerobic count, coliforms, and Escherichia coli, Staphylococcus aureus, Salmonella, Vibrio cholerae and Vibrio parahaemolyticus. The food handlers had moderate levels of food safety knowledge (61.7%) with good attitude (51.9/60) and self-reported practices (53.2/60). It is noteworthy that the good self-reported practices were not reflected in the microbiological assessment of food handlers’ hands, in which 65% of the food handlers examined had a total aerobic count ≥20 CFU/cm2 and Salmonella was detected on 48% of the food handlers’ hands. In conclusion, the suggestion of this study was that the food handlers had adequate food safety knowledge, but perceived knowledge failed to be translated into practices at work.

  13. Assessment of Food Safety Knowledge, Attitude, Self-Reported Practices, and Microbiological Hand Hygiene of Food Handlers

    Directory of Open Access Journals (Sweden)

    Hui Key Lee

    2017-01-01

    Full Text Available Institutional foodborne illness outbreaks continue to hit the headlines in the country, indicating the failure of food handlers to adhere to safe practices during food preparation. Thus, this study aimed to compare the knowledge, attitude, and self-reported practices (KAP of food safety assessment and microbiological assessment of food handlers’ hands as an indicator of hygiene practices in food premises. This study involved 85 food handlers working in a university located in Kuala Lumpur, Malaysia. The food safety KAP among food handlers (n = 67 was assessed using a questionnaire; while the hand swabs (n = 85 were tested for the total aerobic count, coliforms, and Escherichia coli, Staphylococcus aureus, Salmonella, Vibrio cholerae and Vibrio parahaemolyticus. The food handlers had moderate levels of food safety knowledge (61.7% with good attitude (51.9/60 and self-reported practices (53.2/60. It is noteworthy that the good self-reported practices were not reflected in the microbiological assessment of food handlers’ hands, in which 65% of the food handlers examined had a total aerobic count ≥20 CFU/cm2 and Salmonella was detected on 48% of the food handlers’ hands. In conclusion, the suggestion of this study was that the food handlers had adequate food safety knowledge, but perceived knowledge failed to be translated into practices at work.

  14. Optical fiber inspection system

    Science.gov (United States)

    Moore, Francis W.

    1987-01-01

    A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected.

  15. Automated extraction of DNA and PCR setup using a Tecan Freedom EVO® liquid handler

    DEFF Research Database (Denmark)

    Frøslev, Tobias Guldberg; Hansen, Anders Johannes; Stangegaard, Michael

    2009-01-01

    We have implemented and validated automated protocols for DNA extraction and PCR setup using a Tecan Freedom EVO® liquid handler mounted with the TeMagS magnetic separation device. The methods were validated for accredited, forensic genetic work according to ISO 17025 using the Qiagen Mag...... genetic DNA typing can be implemented on a simple robot leading to the reduction of manual work as well as increased quality and throughput....

  16. 46 CFR 153.812 - Inspection for Certificate of Inspection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Inspection for Certificate of Inspection. 153.812... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Testing and Inspection § 153.812 Inspection for Certificate of Inspection. The rules governing the...

  17. Characterization of Nontyphoidal Salmonella Isolates from Asymptomatic Migrant Food Handlers in Peninsular Malaysia.

    Science.gov (United States)

    Woh, Pei Yee; Thong, Kwai Lin; Behnke, Jerzy Marian; Lewis, John Watkin; Zain, Siti Nursheena Mohd

    2017-08-01

    Asymptomatic Salmonella carriers who work as food handlers pose food safety and public health risks, particularly during food preparation, and this has serious implications for the disease burden in society. Therefore, we conducted a study to determine the number of Salmonella carriers in a migrant cohort in several food establishments in three major cities in Peninsular Malaysia. Sociodemographic data and stool samples were collected and analyzed using standard methods of detection and isolation. Antimicrobial susceptibility tests of the positive samples were also performed. A total of 317 migrant food handlers, originating from South and Southeast Asian countries, were recruited voluntarily. Nine (2.8%) stool samples were confirmed to be Salmonella positive. PCR serotyping and pulsed-field gel electrophoresis identified four serotypes as Typhimurium (n = 3), Corvallis (n = 2), Hadar (n = 1), Agona (n = 1) and two unknown serovars. Antimicrobial susceptibility tests revealed that all nine isolates were susceptible to amoxicillin-clavulanic acid, cefotaxime, ceftazidime, ceftriaxone, and gentamycin. However, seven isolates were found to be multidrug resistant to ampicillin, chloramphenicol, trimethoprim-sulfamethoxazole, sulfonamides, streptomycin, and tetracycline. This study highlights that carriers of nontyphoidal Salmonella exist among migrant food handlers, which poses a health risk to consumers through food contamination. Our results indicate a need for authorities to enhance food safety awareness in the migrant workers and to reevaluate current health screening methods to include preventive measure such as mandatory stool screening as part of the preemployment and routine health examinations.

  18. Microorganisms as an Indicator of Hygiene Status Among Migrant Food Handlers in Peninsular Malaysia.

    Science.gov (United States)

    Woh, Pei Yee; Thong, Kwai Lin; Lim, Yvonne Ai Lian; Behnke, Jerzy Marian; Lewis, John Watkin; Mohd Zain, Siti Nursheena

    2017-10-01

    This study used microbial indicators to assess the hygiene status of 383 migrant food handlers from 3 urban cities in Peninsular Malaysia. Microbiological analysis revealed that all the hand swabs tested 99.5% positive for aerobic plate counts (mean [M] ± standard deviation [SD] = 3.57 ± 0.83 log 10 CFU [colony forming unit]), 20.8% positive for total coliform/ Escherichia coli (M ± SD = 0.30 ± 0.67 log 10 CFU), and 63.4% positive for Staphylococcus aureus (M ± SD = 1.38 ± 1.26 log 10 CFU). In addition, aerobic plate counts and Staphylococcus aureus counts exceeded the acceptable standard levels. Bacterial counts were found to be significantly associated with subjects' country of origin ( P = .019) and working responsibilities ( P = .001). Our findings indicate high probability of transmission of pathogenic bacteria from the food handlers' hands to customers during meal preparation and serving. This calls for improvements in personal hygiene and sanitation standards by the relevant health authorities among migrant food handlers.

  19. Technical regulation of nondestructive inspection

    International Nuclear Information System (INIS)

    1995-01-01

    It starts with the explanation of definition of nondestructive inspection and qualifications for a inspection. It lists the technical regulations of nondestructive inspections which are radiographic testing, ultrasonic flaw detecting test, liquid penetrant test, magnetic particle inspection, eddy current test visual inspection and leakage test.

  20. Seroprevalence of hepatitis B and C viruses among medical waste handlers at Gondar town Health institutions, Northwest Ethiopia

    Directory of Open Access Journals (Sweden)

    Anagaw Belay

    2012-01-01

    Full Text Available Abstract Background Viral hepatitis is an inflammation of the liver due to viral infections and there are groups of viruses that affects the liver of which hepatitis B and C viruses are the causative agents of sever form of liver disease with high rate of mortality. Medical waste handlers who undergo collection, transportation, and disposal of medical wastes in the health institutions are at risk of exposure to acquire those infections which transmit mainly as a result of contaminated blood and other body fluids including injury with sharp instruments, splash to the eye or mucous membrane. This study aimed to determine the prevalence of hepatitis B and/or C viruses and associated risk factors among medical waste handlers. Results A cross-sectional study was conducted from April, 2011 to June, 2011 in government health institutions at Gondar town. Socio-demographic and possible risk factors data from medical waste handlers were collected using pre-tested and well structured questionnaires. Venous bloods were collected and the serums were tested for hepatitis B surface antigen and anti-hepatitis C antibody using rapid Immunochromatography assay. Data was entered and analyzed using SPSS software package (version16. Chi-square and Fisher exact tests were used to assess risk of association. A p-value of A total of 100 medical waste handlers and 100 non-clinical waste handlers were examined for HBV and HCV viruses. HBV was detected in 6 (6.0% and 1 (1.0% and HCV in 1 (1.0% and 0 (0.0% of medical waste handlers and non-clinical waste handlers, respectively. Significant differences were observed in the detection rates of HBV (OR = 6.3; X2 = 4.1; P = 0.04 and overall infection rate (HBV + HCV (OR = 7.5; X2 = 5.2; P: 0.02 in medical waste handlers when compared with non-clinical waste handlers. It was found that none of the observed risk factors significantly associated with rate of hepatitis infection compared to others. Conclusions Prevalence of HBV and

  1. Health products inspection

    International Nuclear Information System (INIS)

    Stoltz, M.

    2009-01-01

    To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

  2. Runway Inspection by RPAS

    Directory of Open Access Journals (Sweden)

    Stanislav Absolon

    2015-10-01

    Full Text Available This article discusses the use of the RPAS for the inspection of the airport operating areas. The paper compares the current process of the inspection of the airport operating areas by the airport staff with the possibilities which are offered by the use of the modern technology RPAS. The following text also describes how to inspect airport operating areas by the RPAS, specific technical possibilities and the applicable technical solutions. Furthermore there are variants of piloting the RPAS, comparing usable equipment, equipment for video recording and the possibility of using thermal imaging camera in the article.

  3. Magnetic rubber inspection (MRI)

    International Nuclear Information System (INIS)

    Carro, L.

    1997-01-01

    Magnetic Rubber Inspection (MRI) was developed to inspect for small cracks and flaws encountered in high performance aircraft. A formula of very fine magnetic particles immersed in a room temperature curing rubber is catalysed and poured into dams (retainers) on the surface of the part to be inspected. Inducing a magnetic field then causes the particles to be drawn to discontinuities in the component under test. These indicating particles are held to the discontinuity by magnetic attraction, as the rubber cures. The solid rubber cast (Replica) is then removed and examined under a microscope for indicating lines of particle concentrations. 3 refs., 6 figs

  4. Automated PCB Inspection System

    Directory of Open Access Journals (Sweden)

    Syed Usama BUKHARI

    2017-05-01

    Full Text Available Development of an automated PCB inspection system as per the need of industry is a challenging task. In this paper a case study is presented, to exhibit, a proposed system for an immigration process of a manual PCB inspection system to an automated PCB inspection system, with a minimal intervention on the existing production flow, for a leading automotive manufacturing company. A detailed design of the system, based on computer vision followed by testing and analysis was proposed, in order to aid the manufacturer in the process of automation.

  5. 1996 Annual report

    International Nuclear Information System (INIS)

    1997-01-01

    This annual report present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1996. The activities are developed in 10 chapters and 2 appendices, were are described the activities and the bases of the Argentine Regulatory System. The followings chapters and appendices are: 1.-Evolution of the nuclear regulatory activities in the Argentina since the beginnings in the CNEA. 2.-Regulatory system, laws and regulations. 3.-Institutional relations with national and international organizations. 4. and 5.-Safeguards and inspections of the nuclear installations. 6.-Radiation control of the occupational and public doses. 7.-Radiological emergencies. 8.-Projects and tasks scientific-technological. 9.-Training courses and meetings. 10.-Economic and human recourses. Appendix I.-Regulatory documentation. Appendix II.- Inspections of nuclear installations

  6. 1999 Annual Report

    International Nuclear Information System (INIS)

    1999-01-01

    This annual report presents information on the main activities carried out by the Nuclear Regulatory Authority (ARN) of Argentina during 1999, on radiation protection and nuclear safety. The work is developed in 9 chapters, 1 summary and 2 appendixes, where a description of the following activities and the bases of the Argentina Regulatory Systems are given: 1. Evolution of the nuclear regulatory activities in Argentina. Organic structures, tasks and budget. 2. Regulatory system, laws, transport of radioactive materials, safety at the management of radioactive wastes, regulatory documents issued. 3. Institutional relations with national and international organizations. 4. Inspection and evaluations of nuclear installations. Safeguards and physical protection. 5. Occupational and environmental surveillance. 6. Radiological emergencies. 7. Scientific and technological activities. Nuclear Regulatory Authority's laboratories. 8. Training, technical information and software development. 9. Radioactive facilities inspections

  7. 2004 Annual report

    International Nuclear Information System (INIS)

    2005-01-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2004. The main topics are the regulatory framework, the national systems to supervise nuclear installations, the emergency systems, the environmental control, the laboratories of the ARN, the institutional relations and the non-proliferation, the training and the public information, the radiological and the nuclear safety inspections, the safeguards and the physical protection, the quality assurance in the ARN, the environmental monitoring, and the human and economic resources. Also, this publication has four annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; ethical code; measurements and evaluations of the drinking water in Ezeiza (Argentina)

  8. Food safety knowledge, attitude and practices of meat handler in abattoir and retail meat shops of Jigjiga Town, Ethiopia.

    Science.gov (United States)

    Tegegne, H A; Phyo, H W W

    2017-12-01

    A cross-sectional survey was carried out among 91 meat handlers by using structured questionnaire to determine the food safety knowledge, attitude and practices in abattoir and retail meat shops of Jigjiga Town. The result shows that majority of the meat handlers were illiterate (30.8%) and primary school leaver (52.7%), and no one went through any food safety training except one meat inspector. The food-handlers' knowledge and safety practices were below acceptable level with the mean score of 13.12 ± 2.33 and 7.7 ± 2.1 respectively. Only few respondents knew about Staphylococcus aureus (3.3% correct answer), hepatitis A virus (19.8% correct answer), and E. coli (5.5% correct answer) as food borne pathogens. About 64% of meat handlers have good attitude about safety of food with mean of total score 14.4 ± 2. All respondents answer correctly questions about proper meat handling and hand washing but they did not translate into strict food hygiene practices. Chi2 analysis testing for the association between knowledge, attitude and practices did not show any significant association. It may be due to meat handlers' below acceptable level safety practices regardless of sociodemographic characteristics, knowledge and attitude. However, there was strong association between level of education and knowledge, and knowledge and hand washing (p practices through better understanding and positive attitude.

  9. Promoting transparency: The Korean national inspection experience

    International Nuclear Information System (INIS)

    Kim, B.K.

    1999-01-01

    The Republic of Korea started the LAMA full-scope safeguards inspection with the TRIGA research reactor in 1976 when the nuclear industry was at its infancy. Over two decades of rapid economic growth was propelled by stable supply of electricity, substantially from nuclear energy. Today nearly half of the nations electricity comes from sixteen operating nuclear power plants (12 LWRs + 4 OLRs). Total number of facilities under IAEA inspection reaches 30 where the Agency conducts about 400 PDIs annually. Within the last decade, nuclear transparency in Korea has transformed into the international norm primarily from the needs of rapidly expanding domestic nuclear program. In addition, possibility of North/South mutual inspection helped initiate the national inspection regime in addition to the IAEA inspection. The Technology Center for Nuclear Control was established at KAERI in 1994 in order to maintain the nation's nuclear verification expertise in support of the Korean government. National inspections have been carried out simultaneously with the IAEA inspection since 1997 with trial facilities, and all domestic facilities are being inspected from this year. Necessary legal framework and working procedures were developed and field-tried for LWRs, OLRs, fuel fabrication plants and research reactor facilities. Although the inspection equipment and technology along with the safeguards criteria are quite similar to those of the Agency, it is essential to maintain the independent conclusion capabilities between IAEA and the national authority. Substantial improvements in the IAEA safeguards inspection goal attainments since 1997 are credited to the increasing safeguards awareness among operators and SSAC. Further work is necessary to develop the evaluation criteria based on the field inspection results to meet the national inspection goals. The Korean Government signed the Additional Protocol with IAEA on June, 1999 after much deliberation since it involves facilities

  10. Wheel inspection system environment.

    Science.gov (United States)

    2008-11-18

    International Electronic Machines Corporation (IEM) has developed and is now marketing a state-of-the-art Wheel Inspection System Environment (WISE). WISE provides wheel profile and dimensional measurements, i.e. rim thickness, flange height, flange ...

  11. Information-Driven Inspections

    International Nuclear Information System (INIS)

    Laughter, Mark D.; Whitaker, J. Michael; Lockwood, Dunbar

    2010-01-01

    New uranium enrichment capacity is being built worldwide in response to perceived shortfalls in future supply. To meet increasing safeguards responsibilities with limited resources, the nonproliferation community is exploring next-generation concepts to increase the effectiveness and efficiency of safeguards, such as advanced technologies to enable unattended monitoring of nuclear material. These include attribute measurement technologies, data authentication tools, and transmission and security methods. However, there are several conceptual issues with how such data would be used to improve the ability of a safeguards inspectorate such as the International Atomic Energy Agency (IAEA) to reach better safeguards conclusions regarding the activities of a State. The IAEA is pursuing the implementation of information-driven safeguards, whereby all available sources of information are used to make the application of safeguards more effective and efficient. Data from continuous, unattended monitoring systems can be used to optimize on-site inspection scheduling and activities at declared facilities, resulting in fewer, better inspections. Such information-driven inspections are the logical evolution of inspection planning - making use of all available information to enhance scheduled and randomized inspections. Data collection and analysis approaches for unattended monitoring systems can be designed to protect sensitive information while enabling information-driven inspections. A number of such inspections within a predetermined range could reduce inspection frequency while providing an equal or greater level of deterrence against illicit activity, all while meeting operator and technology holder requirements and reducing inspector and operator burden. Three options for using unattended monitoring data to determine an information-driven inspection schedule are to (1) send all unattended monitoring data off-site, which will require advances in data analysis techniques to

  12. Occupational determinants of serum cholinesterase inhibition among organophosphate-exposed agricultural pesticide handlers in Washington State

    Science.gov (United States)

    Hofmann, Jonathan N; Keifer, Matthew C; De Roos, Anneclaire J; Fenske, Richard A; Furlong, Clement E; van Belle, Gerald; Checkoway, Harvey

    2010-01-01

    Objective To identify potential risk factors for serum cholinesterase (BuChE) inhibition among agricultural pesticide handlers exposed to organophosphate (OP) and N-methyl-carbamate (CB) insecticides. Methods We conducted a longitudinal study among 154 agricultural pesticide handlers who participated in the Washington State cholinesterase monitoring program in 2006 and 2007. BuChE inhibition was analyzed in relation to reported exposures before and after adjustment for potential confounders using linear regression. Odds ratios estimating the risk of ‘BuChE depression’ (>20% from baseline) were also calculated for selected exposures based on unconditional logistic regression analyses. Results An overall decrease in mean BuChE activity was observed among study participants at the time of follow-up testing during the OP/CB spray season relative to pre-season baseline levels (mean decrease of 5.6%, P < 0.001). Score for estimated cumulative exposure to OP/CB insecticides in the past 30 days was a significant predictor of BuChE inhibition (β = −1.74, P < 0.001). Several specific work practices and workplace conditions were associated with greater BuChE inhibition, including mixing/loading pesticides and cleaning spray equipment. Factors that were protective against BuChE inhibition included full-face respirator use, wearing chemical-resistant boots, and storing personal protective equipment in a locker at work. Conclusions Despite existing regulations, agricultural pesticide handlers continue to be exposed to OP/CB insecticides at levels resulting in BuChE inhibition. These findings suggest that modifying certain work practices could potentially reduce BuChE inhibition. Replication from other studies will be valuable. PMID:19819864

  13. Estimation of inspection effort

    International Nuclear Information System (INIS)

    Mullen, M.F.; Wincek, M.A.

    1979-06-01

    An overview of IAEA inspection activities is presented, and the problem of evaluating the effectiveness of an inspection is discussed. Two models are described - an effort model and an effectiveness model. The effort model breaks the IAEA's inspection effort into components; the amount of effort required for each component is estimated; and the total effort is determined by summing the effort for each component. The effectiveness model quantifies the effectiveness of inspections in terms of probabilities of detection and quantities of material to be detected, if diverted over a specific period. The method is applied to a 200 metric ton per year low-enriched uranium fuel fabrication facility. A description of the model plant is presented, a safeguards approach is outlined, and sampling plans are calculated. The required inspection effort is estimated and the results are compared to IAEA estimates. Some other applications of the method are discussed briefly. Examples are presented which demonstrate how the method might be useful in formulating guidelines for inspection planning and in establishing technical criteria for safeguards implementation

  14. Packaging supplier inspection guide

    International Nuclear Information System (INIS)

    Stromberg, H.M.; Gregg, R.E.; Kido, C.; Boyle, C.D.

    1991-05-01

    This is document is a guide for conducting quality assurance inspections of transportations packaging suppliers, where suppliers are defined as designers, fabricators, distributors, users, or owners of transportation packaging. This document can be used during an inspection to determine regulatory compliance within the requirements of 10 Code of Federal Regulations, Part 71, Subpart H (10 CFR 71.101--71.135). The guidance described in this document provides a framework for an inspection. It provides the inspector with the flexibility to adapt the methods and concepts presented here to meet the needs of the particular facility being inspected. The guide was developed to ensure a structured and consistent approach for inspections. The method treats each activity at a supplier facility as a separate entity (or functional element), and combines the activities within the framework of an ''inspection tree.'' The method separates each functional element into several areas of performance and then identifies guidelines, based on regulatory requirements, to be used to qualitatively rate each area. This document was developed to serve as a field manual to facilitate the work of inspectors. 1 ref., 1 fig., 5 tabs

  15. Fuel inspection device

    International Nuclear Information System (INIS)

    Tsuji, Tadashi.

    1990-01-01

    The fuel inspection device of the present invention has a feature of obtaining an optimum illumination upon fuel rod interval inspection operation in a fuel pool. That is, an illumination main body used underwater is connected to a cable which is led out on a floor. A light control device is attached to the other end of the cable and an electric power cable is connected to the light control device. A light source (for example, incandescent lamp) is incorporated in the casing of the illumination main body, and a diffusion plate is disposed at the front to provide a plane light source. The light control device has a light control knob capable of remote-controlling the brightness of the light of the illumination main body. In the fuel inspection device thus constituted, halation is scarcely caused on the image screen upon inspection of fuels by a submerged type television camera to facilitate control upon inspection. Accordingly, efficiency of the fuel inspection can be improved to shorten the operation time. (I.S.)

  16. Occupational therapists as dog handlers: the collective experience with animal-assisted therapy in Iraq.

    Science.gov (United States)

    Fike, Lorie; Najera, Cecilia; Dougherty, David

    2012-01-01

    The first pair of US Army animal-assisted therapy (AAT) dogs deployed to Iraq in December 2007 with the 85th Medical Detachment Combat and Operational Stress Control unit. As of this writing, 6 dogs have deployed to Iraq and Afghanistan, offering Soldiers a small reminder of home. Army occupational therapists led the way in this endeavor as primary handlers; the path has been rocky but ultimately rewarding. This article depicts how occupational therapists used AAT and animal-assisted activities to help Soldiers cope with the stressors of living in a deployed environment. Challenges and lessons-learned, including anecdotal examples, are discussed.

  17. 2000 Annual report

    International Nuclear Information System (INIS)

    2001-01-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (NRA) of the Argentina during 2000. The following activities and developed topic in this report describe: the Argentine regulatory system; the evolution of the nuclear regulatory activities in the Argentina since the beginnings in the National Atomic Energy Commission (NAEC) of Argentina; the nuclear regulatory laws and standards; the safeguards and inspection of the nuclear facilities and nuclear power plants; the radiological emergency systems; the environmental monitoring; the institutional relations with national and international organizations; the biological and physics dosimetry; the training courses and meetings; the economic and human recourses

  18. 7 CFR 301.89-15 - Compensation for growers, handlers, and seed companies in the 1999-2000 and subsequent crop seasons.

    Science.gov (United States)

    2010-01-01

    ... Karnal bunt after purchase by the handler or seed company, as long as the price to be paid by the handler... the intention of producing certified wheat seed. (1) Growers. Growers of wheat in an area under the... prior to sale, or that was tested by APHIS and found positive for Karnal bunt after sale and the price...

  19. Automated extraction of DNA from blood and PCR setup using a Tecan Freedom EVO liquid handler for forensic genetic STR typing of reference samples

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Frøslev, Tobias G; Frank-Hansen, Rune

    2011-01-01

    We have implemented and validated automated protocols for DNA extraction and PCR setup using a Tecan Freedom EVO liquid handler mounted with the Te-MagS magnetic separation device (Tecan, Männedorf, Switzerland). The protocols were validated for accredited forensic genetic work according to ISO...... handler leading to the reduction of manual work, and increased quality and throughput....

  20. Factors affecting food handling Practices among food handlers of Dangila town food and drink establishments, North West Ethiopia

    Science.gov (United States)

    2014-01-01

    Background Food borne diseases are major health problems in developed and developing countries including Ethiopia. The problem is more noticeable in developing countries due to prevailing poor food handling and sanitation practices, inadequate food safety laws, weak regulatory systems, lack of financial resources to invest on safer equipments, and lack of education for food handlers. Methods The objective of this study was to assess food handling practice and associated factors among food handlers working in food and drinking establishments of Dangila town, North West Ethiopia. Cross-sectional quantitative study design was conducted among 406 food handlers working in 105 food and drink establishments from July to August 2013 in Dangila town. Data were collected using face to face interview with pretested structured questionnaire and physical observation. Result The mean age of the respondents was 22.7 ± 4.2 years of which 62.8% of the food handlers were females. Two hundred thirteen (52.5%) of food handlers had good food handling practices. Marital status (AOR = 7.52, 95% CI, 1.45-38.97), monthly income (AOR = 0.395, 95% CI, 0.25-0.62), knowledge about food handling (AOR = 1.69, 95% CI, 1.05-2.73), existence of shower facility (AOR = 1.89, 95% CI, 1.12-3.21) and separate dressing room (AOR = 1.97, 95% CI, 1.11-3.49) were found to be significantly associated with good food handling Practices. Conclusion Above half of food handlers had good food handling practices. Marital status, monthly income, knowledge status, existence of shower facility, existence of separate dressing room and presence of insect and rodent were factors associated with food handling Practices. PMID:24908104

  1. Incore inspection device

    International Nuclear Information System (INIS)

    Ogisu, Tatsuki; Taguchi, Kosei.

    1995-01-01

    The device of the present invention can inspect surfaces of equipments in reactor water in a nuclear reactor in a state of atmospheric air. Namely, an inspection device is movable forwardly and backwardly in a water-proof vessel. An annular sucker with pleats is disposed to the outer side of a lid of the water-proof vessel. A television camera for an under water monitoring is disposed to the inner side of the lid of the water-proof vessel by way of a partitioning wall with lid. Transferring screws are disposed at the back and on the side of the water-proof vessel. In the device having such a constitution, (1) the inside of the water-proof vessel is at first made water-tight by closing the partitioning wall with lid, (2) the back and the side screws are operated by the guide of the underwater monitoring television camera, to transfer the water-proof vessel to the surface of the reactor core to be inspected, (3) the annular sucker with pleats is urged on the surface to be inspected by the back screw, to fix the water-proof vessel, (4) reactor water in a space of the annular sucker with pleats is discharged and replaced with air, and (5) the lid of the partition wall with lid is opened and the inspection device is disposed at a position of the underwater monitoring television camera, to inspect the surface to be inspected in a state of atmospheric air. (I.S.)

  2. 1998 Annual Cathodic Protection Survey Report for the 242-A Evaporator Area

    International Nuclear Information System (INIS)

    BOWMAN, T.J.

    1999-01-01

    This report is the second annual cathodic protection report for the 242-A evaporator. The report documents and trends annual polarization survey data, rectifier inspection data, and continuity data from 1994 through mid-1999

  3. Inspection Strategies for Concrete Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    1989-01-01

    In this paper an optimal inspection strategy for concrete bridges based on periodic routine and detailed inspections is presented. The failure mode considered is corrosion of the reinforcement due to chlorides. A simple modelling of the corrosion and of the inspection strategy is presented....... The optimal inspection strategy is determined from an optimization problem, where the design variables are time intervals between detailed inspections and the concrete cover. The strategy is illustrated on a simple structure, namely a reinforced concrete beam....

  4. Prevalence and factors associated with intestinal parasitic infections among food handlers of Southern Ethiopia: cross sectional study.

    Science.gov (United States)

    Mama, Mohammedaman; Alemu, Getaneh

    2016-02-01

    Globally about one third of the total population is estimated to be infected with intestinal parasites, of which, the majority are people living in tropical and sub-tropical parts of the world. Cases of intestinal parasitosis are also highly abundant in Ethiopia and hence the aim of present study was to assess prevalence and predictors of intestinal parasitic infections among food handlers working in Arba Minch University students' cafeteria, South Ethiopia. A cross sectional study was conducted among food handlers working in Arba Minch University from April to June, 2015. A pretested structured questionnaire was used for collecting data about socio-demographic characteristics and possible risk factors. Stool specimens were collected and examined microscopically for the presence of eggs, cysts and trophozoites of intestinal parasites. Data entry and analysis were done using SPSS version 20 software. A total of 376 food handlers were enrolled in the study of which thirty one of them were not willing to participate for a stool examination. The majority of study participants were females 273 (72.6 %). About 123 (36 %) of food handlers were found to be positive for different intestinal parasites with the most abundant parasite of Entamoeba histolytica/dispar 48 (14 %) followed by Ascaris lumbricoides 32 (9.27 %). Finger nail status (AOR: 2.2, 95 % CI: 1.29-3.72), hand washing practice after toilet (AOR: 1.71, 95 % CI: 1.06-2.77), hand washing practice before food handling (AOR: 1.69, 95 % CI: 1.04-2.75), preparing food when suffering from diseases (AOR: 3.08, 95 % CI: 1.17-8.13), and using common knife for cutting raw flesh food and other food (AOR: 1.72, 95 % CI: 1.01-2.92) were independent predictors of intestinal parasitic infection among the food handlers. This study revealed a high prevalence of intestinal parasites among food handlers. Since most of the intestinal parasites are transmitted by the feco-oral route, food handlers could be an important source of

  5. Piping inspection round robin

    International Nuclear Information System (INIS)

    Heasler, P.G.; Doctor, S.R.

    1996-04-01

    The piping inspection round robin was conducted in 1981 at the Pacific Northwest National Laboratory (PNNL) to quantify the capability of ultrasonics for inservice inspection and to address some aspects of reliability for this type of nondestructive evaluation (NDE). The round robin measured the crack detection capabilities of seven field inspection teams who employed procedures that met or exceeded the 1977 edition through the 1978 addenda of the American Society of Mechanical Engineers (ASME) Section 11 Code requirements. Three different types of materials were employed in the study (cast stainless steel, clad ferritic, and wrought stainless steel), and two different types of flaws were implanted into the specimens (intergranular stress corrosion cracks (IGSCCs) and thermal fatigue cracks (TFCs)). When considering near-side inspection, far-side inspection, and false call rate, the overall performance was found to be best in clad ferritic, less effective in wrought stainless steel and the worst in cast stainless steel. Depth sizing performance showed little correlation with the true crack depths

  6. Inspection device in liquid

    International Nuclear Information System (INIS)

    Nagaoka, Etsuo.

    1996-01-01

    The present invention provides an inspection device in PWR reactor core in which inspection operations are made efficient by stabilizing a posture of the device in front-to-back, vertical and left-to-right directions by a simple structure. When the device conducts inspection while running in liquid, the front and the back directions of the device main body are inspected using a visual device while changing the posture by operating a front-to-back direction propulsion device and a right-to-left direction propulsion device, and a vertical direction propulsion device against to rolling, pitching and yawing of the device main body. In this case, a spherical magnet moves freely in the gravitational direction in a vibration-damping fluid in a non-magnetic spherical shell following the change of the posture of the device main body, in which the vibrations due to the movement of the spherical magnet is settled by the vibration-damping fluid thereby stabilizing the posture of the device main body. At a typical inspection posture, the settling effect is enhanced by the attraction force between the spherical magnets in the spherical shell and each of magnetic force-attracted magnetic members disposed to the outer circumference of the shell, and the posture of the device main body can be confirmed in front-to-back, right-to-left and vertical directions by each of the posture confirming magnetic sensors. (N.H.)

  7. Prevalence of Intestinal Parasitic Infection among Food Handlers in Northwest Iran

    Directory of Open Access Journals (Sweden)

    Davoud Balarak

    2016-01-01

    Full Text Available Parasitic diseases are among the most important infectious diseases and pose health problems in many countries, most especially in developing countries. Workers at food centers could transmit parasitic infections in the absence of sanitation. This is a descriptive study conducted to determine the prevalence of intestinal parasitic infections in food clerks in the city of Tabriz in 2014. Data was recorded in the offices of the health center for all food handlers who were referred to the laboratory for demographic and stool tests to receive the health card. Parasitic infection was observed in 172 cases (3.73% of 4612 samples. A total of 156 positive samples (90.69% were related to protozoa and 16 (9.3% were related to helminthes. Most of the parasitic infections were related to Giardia and Entamoeba coli and the lowest infection was related to H. nana. Also, there was a significant relationship between level of education and parasitic infection rate (P=0.0044. But there was no significant difference between the type of infection and amount of intestinal parasites. The results show that the prevalence of intestinal parasites, especially pathogenic protozoa, is common in some food handlers. Therefore, more sanitary controls are required and increasing of education will play a crucial role in improving the health of these people.

  8. New Version of SeismicHandler (SHX) based on ObsPy

    Science.gov (United States)

    Stammler, Klaus; Walther, Marcus

    2016-04-01

    The command line version of SeismicHandler (SH), a scientific analysis tool for seismic waveform data developed around 1990, has been redesigned in the recent years, based on a project funded by the Deutsche Forschungsgemeinschaft (DFG). The aim was to address new data access techniques, simplified metadata handling and a modularized software design. As a result the program was rewritten in Python in its main parts, taking advantage of simplicity of this script language and its variety of well developed software libraries, including ObsPy. SHX provides an easy access to waveforms and metadata via arclink and FDSN webservice protocols, also access to event catalogs is implemented. With single commands whole networks or stations within a certain area may be read in, the metadata are retrieved from the servers and stored in a local database. For data processing the large set of SH commands is available, as well as the SH scripting language. Via this SH language scripts or additional Python modules the command set of SHX is easily extendable. The program is open source, tested on Linux operating systems, documentation and download is found at URL "https://www.seismic-handler.org/".

  9. Plant abnormality inspection device

    International Nuclear Information System (INIS)

    Takenaka, Toshio.

    1990-01-01

    The present invention concerns a plant abnormality inspection device for conducting remote or automatic patrolling inspection in a plant and, more particularly, relates to such a device as capable of detecting abnormal odors. That is, the device comprises a moving device for moving to a predetermined position in the plant, a plurality of gas sensors for different kind of gases to be inspected mounted thereon, a comparator for comparing the concentration of a gas detected by the gas sensor with the normal gas concentration at the predetermined position and a judging means for judging the absence or presence of abnormality depending on the combination of the result of the comparison and deliverying a signal if the state is abnormal. As a result, a slight amount of gas responsible to odors released upon abnormality of the plant can be detected by a plurality of gas sensors for different kinds gases to rapidly and easily find abnormal portions in the plant. (I.S.)

  10. Magnetic particle inspection

    Science.gov (United States)

    Sastri, Sankar

    1990-01-01

    The purpose of this experiment is to familiarize the student with magnetic particle inspection and relate it to classification of various defects. Magnetic particle inspection is a method of detecting the presence of cracks, laps, tears, inclusions, and similar discontinuities in ferromagnetic materials such as iron and steel. This method will most clearly show defects that are perpendicular to the magnetic field. The Magnaglo method uses a liquid which is sprayed on the workpiece to be inspected, and the part is magnetized at the same time. The workpiece is then viewed under a black light, and the presence of discontinuity is shown by the formation of a bright indication formed by the magnetic particles over the discontinuity. The equipment and experimental procedures are described.

  11. Federal environmental inspections handbook

    International Nuclear Information System (INIS)

    1991-10-01

    This Federal Environmental Inspection Handbook has been prepared by the Department of Energy (DOE), Office of Environmental Guidance, RCRA/CERCLA Division (EH-231). It is designed to provide DOE personnel with an easily accessible compilation of the environmental inspection requirements under Federal environmental statutes which may impact DOE operations and activities. DOE personnel are reminded that this Handbook is intended to be used in concert with, and not as a substitute for, the Code of Federal Regulations (CFR). Federal Register (FR), and other applicable regulatory documents

  12. Subsea Infrastructure Inspection

    DEFF Research Database (Denmark)

    Mai, Christian; Pedersen, Simon; Hansen, Leif

    2016-01-01

    Due to the increasing energy demands, the offshore energy business has boomed in recent decades. Sub-sea pipeline and power transmission cable installations are commonly applied worldwide. Any potential breakages can cause equipment damage and also damage the environment. The majority...... (S-AUVs) can significantly change the inspections of infrastructure, as these vehicles could be much cheaper to deploy. S-AUVs can potentially conduct faster data collection and provide higher inspection data quality. However, there are still some technical challenges related to: underwater wireless...

  13. Inspection and test planning

    International Nuclear Information System (INIS)

    Miller, T.

    1980-01-01

    Purpose of Quality Plan - arrangement of all necessary tests or inspections as far as possible filted to certain components or systems. Subject of Quality Plan - precise determination of tests or inspections and - according to the actual safety significance - the certificates to be done. Disposition of Quality Plan - accommodation of tests to the actual state of fabrication. Application of Quality Plan - to any component or system that is regarded. Supervision of Employment - by authorized personnel of manufacturer, customer or authority providing exact employment of quality plan. Overservance of Instructions - certificates given by authorized personnel. (orig./RW)

  14. Inspection of Emergency Arrangements

    International Nuclear Information System (INIS)

    2013-01-01

    The Working Group on Inspection Practices (WGIP) was tasked by the NEA CNRA to examine and evaluate the extent to which emergency arrangements are inspected and to identify areas of importance for the development of good inspection practices. WGIP members shared their approaches to the inspection of emergency arrangements by the use of questionnaires, which were developed from the requirements set out in IAEA Safety Standards. Detailed responses to the questionnaires from WGIP member countries have been compiled and are presented in the appendix to this report. The following commendable practices have been drawn from the completed questionnaires and views provided by WGIP members: - RBs and their Inspectors have sufficient knowledge and information regarding operator's arrangements for the preparedness and response to nuclear emergencies, to enable authoritative advice to be given to the national coordinating authority, where necessary. - Inspectors check that the operator's response to a nuclear emergency is adequately integrated with relevant response organisations. - Inspectors pay attention to consider the integration of the operator's response to safety and security threats. - The efficiency of international relations is checked in depth during some exercises (e.g. early warning, assistance and technical information), especially for near-border facilities that could lead to an emergency response abroad. - RB inspection programmes consider the adequacy of arrangements for emergency preparedness and response to multi-unit accidents. - RBs assess the adequacy of arrangements to respond to accidents in other countries. - The RB's role is adequately documented and communicated to all agencies taking part in the response to a nuclear or radiological emergency. - Inspectors check that threat assessments for NPPs have been undertaken in accordance with national requirements and that up-to-date assessments have been used as the basis for developing emergency plans for

  15. 7 CFR 1730.21 - Inspections and tests.

    Science.gov (United States)

    2010-01-01

    ... reliability and security of the electric power grid, cause significant risk to the safety and health of the... AGRICULTURE ELECTRIC SYSTEM OPERATIONS AND MAINTENANCE Operations and Maintenance Requirements § 1730.21... parts of its electric system, annually exercise its ERP, and maintain records of such inspections and...

  16. Pipework inspection apparatus

    International Nuclear Information System (INIS)

    Wrigglesworth, K.J.; Knowles, J.F.

    1987-01-01

    The patent concerns a pipework inspection apparatus, which is capable of negotiating bends in pipework. The apparatus comprises a TV camera system, which contains an optical section and an electronics section, which are connected by a flexible coupling. The system can be pulled or pushed along the bore of the pipework. (U.K.)

  17. Fuel assembly inspection device

    International Nuclear Information System (INIS)

    Yaginuma, Yoshitaka

    1998-01-01

    The present invention provides a device suitable to inspect appearance of fuel assemblies by photographing the appearance of fuel assemblies. Namely, the inspection device of the present invention measures bowing of fuel assembly or each of fuel rods or both of them based on the partially photographed images of fuel assembly. In this case, there is disposed a means which flashily projects images in the form of horizontal line from a direction intersecting obliquely relative to a horizontal cross section of the fuel assembly. A first image processing means separates the projected image pictures including projected images and calculates bowing. A second image processing means replaces the projected image pictures of the projected images based on projected images just before and after the photographing. Then, images for the measurement of bowing and images for inspection can be obtained simultaneously. As a result, the time required for the photographing can be shortened, the time for inspection can be shortened and an effect of preventing deterioration of photographing means by radiation rays can be provided. (I.S.)

  18. Prevalence and factors associated with intestinal parasites among food handlers of food and drinking establishments in Aksum Town, Northern Ethiopia.

    Science.gov (United States)

    Gezehegn, Dejen; Abay, Mebrahtu; Tetemke, Desalegn; Zelalem, Hiwet; Teklay, Hafte; Baraki, Zeray; Medhin, Girmay

    2017-10-17

    Various epidemiological studies indicate that the prevalence of intestinal parasites is high in developing countries and those parasites are major public health importance in Sub-Saharan Africa. Their distribution is mainly associated with poor personal hygiene, environmental sanitation and lack of access to clean water. This study was conducted to estimate the prevalence of intestinal parasitic infection and identify factors associated with intestinal parasitic infection among food handlers in the Aksum Town of Tigray Regional State, North Ethiopia. A cross-sectional study design was used among 400 randomly selected food handlers who were selected as respondents. Data were collected by face to face interviewer administered questionnaire supplemented with observational checklist. Fresh stool samples were collected from respondents and were examined microscopically for the presence of any of intestinal parasites using standard laboratory methods. Multivariable logistic regression model using Adjusted Odds Ratio (AOR) and 95% Confidence Interval (CI) was fitted to analyze the independent predictors of intestinal parasitic infections. The mean age of the food handlers included in this study was 26.0 years. Of the total respondents, 72.5% were females, 63% have completed at least secondary school educational level. Five species of Intestinal Parasites (IPs) were identified. The overall prevalence of being infected with at least one intestinal parasite was 14.5%, 95% CI (11.3, 18.0). The odds of being positive for at least one intestinal parasitic infection was 12.3 times higher among food handlers who practice medical checkup every 9 months compared to those who have a medical checkup every 3 months. The odds of being positive for intestinal parasitic infection was 3 times higher among food handlers with no formal education compared to those who have a level of education secondary school and above. Food handlers who received food hygiene and safety training were 66

  19. Prevalence and factors associated with intestinal parasites among food handlers of food and drinking establishments in Aksum Town, Northern Ethiopia

    Directory of Open Access Journals (Sweden)

    Dejen Gezehegn

    2017-10-01

    Full Text Available Abstract Background Various epidemiological studies indicate that the prevalence of intestinal parasites is high in developing countries and those parasites are major public health importance in Sub-Saharan Africa. Their distribution is mainly associated with poor personal hygiene, environmental sanitation and lack of access to clean water. This study was conducted to estimate the prevalence of intestinal parasitic infection and identify factors associated with intestinal parasitic infection among food handlers in the Aksum Town of Tigray Regional State, North Ethiopia. Methods A cross-sectional study design was used among 400 randomly selected food handlers who were selected as respondents. Data were collected by face to face interviewer administered questionnaire supplemented with observational checklist. Fresh stool samples were collected from respondents and were examined microscopically for the presence of any of intestinal parasites using standard laboratory methods. Multivariable logistic regression model using Adjusted Odds Ratio (AOR and 95% Confidence Interval (CI was fitted to analyze the independent predictors of intestinal parasitic infections. Result The mean age of the food handlers included in this study was 26.0 years. Of the total respondents, 72.5% were females, 63% have completed at least secondary school educational level. Five species of Intestinal Parasites (IPs were identified. The overall prevalence of being infected with at least one intestinal parasite was 14.5%, 95% CI (11.3, 18.0. The odds of being positive for at least one intestinal parasitic infection was 12.3 times higher among food handlers who practice medical checkup every 9 months compared to those who have a medical checkup every 3 months. The odds of being positive for intestinal parasitic infection was 3 times higher among food handlers with no formal education compared to those who have a level of education secondary school and above. Food handlers who

  20. Inspections in veterinary medicine 2005; Veterinaerinspektioner 2005

    Energy Technology Data Exchange (ETDEWEB)

    Joensson, Helene

    2006-11-15

    In Sweden 300 veterinary clinics have a license for x-ray diagnostics. Six of them also have a license for nuclear medicine. During 2005 eight clinics were inspected and the results show that the radiation protection in veterinary medicine can be improved. No clinic fulfilled the regulations of categorization of workplaces and workers (SSI FS 1998:3). Half of the clinics had no Swedish manual to the x-ray equipment and just as many had not performed the annual function check. Obviously, there is a need for more information to staff in veterinary medicine.

  1. A survey of food hygiene knowledge and attitudes among Chinese food handlers in Fong Song Tong district.

    Science.gov (United States)

    Tang, C H; Fong, U W

    2004-01-01

    The purpose of this study was to find out the knowledge and attitudes concerning food hygiene among Chinese food handlers in Fong Song Tong district, and to analyze the impact of variables on the degree of knowledge and attitudes. Face-to-face interviews were conducted within Chinese food handlers in Fong Song Tong district using a self-designed questionnaire, which contained food hygiene knowledge and attitudes. Main knowledge outcome measures included food handling, personal hygiene and legislation issues. Questionnaires were completed by 580 (72.0%) Chinese food handlers from 91% premises of the district. 71.2% Chinese food handlers could respond correctly to eight or more out of 11 knowledge questions and 1.4% respondents only achieved full scores of knowledge. Fully correct response of personal hygiene knowledge was statistically and significantly higher than food handling knowledge (phygiene education. Male respondents, age less than 30, secondary education or above, five years or more of working experience, or who had previously attended a health training within the last two years, generally performed better on the knowledge of food hygiene. Chinese food handlers working in the kitchen and owners' beliefs on 'cleaning the kitchen before getting off duty' was reasonable. Those with secondary education at least, or who had prior participation in a health training within the last two years would need more food hygiene knowledge than the people aged over 30 or who were the owners. It would be more motivated by changing the traditional training model, community-based education in an optimum situation, additional authoritative information, attitudes and intentions of learning on food hygiene.

  2. Automation of metabolic stability studies in microsomes, cytosol and plasma using a 215 Gilson liquid handler.

    Science.gov (United States)

    Linget, J M; du Vignaud, P

    1999-05-01

    A 215 Gilson liquid handler was used to automate enzymatic incubations using microsomes, cytosol and plasma. The design of automated protocols are described. They were based on the use of 96 deep well plates and on HPLC-based methods for assaying the substrate. The assessment of those protocols was made with comparison between manual and automated incubations, reliability and reproducibility of automated incubations in microsomes and cytosol. Examples of the use of those programs in metabolic studies in drug research, i.e. metabolic screening in microsomes and plasma were shown. Even rapid processes (with disappearance half lives as low as 1 min) can be analysed. This work demonstrates how stability studies can be automated to save time, render experiments involving human biological media less hazardous and may be improve inter-laboratory reproducibility.

  3. Automated dried blood spots standard and QC sample preparation using a robotic liquid handler.

    Science.gov (United States)

    Yuan, Long; Zhang, Duxi; Aubry, Anne-Francoise; Arnold, Mark E

    2012-12-01

    A dried blood spot (DBS) bioanalysis assay involves many steps, such as the preparation of standard (STD) and QC samples in blood, the spotting onto DBS cards, and the cutting-out of the spots. These steps are labor intensive and time consuming if done manually, which, therefore, makes automation very desirable in DBS bioanalysis. A robotic liquid handler was successfully applied to the preparation of STD and QC samples in blood and to spot the blood samples onto DBS cards using buspirone as the model compound. This automated preparation was demonstrated to be accurate and consistent. However the accuracy and precision of automated preparation were similar to those from manual preparation. The effect of spotting volume on accuracy was evaluated and a trend of increasing concentrations of buspirone with increasing spotting volumes was observed. The automated STD and QC sample preparation process significantly improved the efficiency, robustness and safety of DBS bioanalysis.

  4. FOODBORNE VIRUSES AND FOOD HANDLERS TRAINING: A SPECIFIC PROJECT FOR OFFICIAL CONTROL

    Directory of Open Access Journals (Sweden)

    L. Tentenni

    2009-12-01

    Full Text Available The aim of this work is to describe the results of an official control project forwarded on the evaluation of prevention of foodborne viruses diseases. The authors describe the real diffusion of noroviruses and sapoviruses including their general features. The Official control carried out is focused on the valuation of specific prevention measures put in place by food business operators in order to avoid fecal-oral contaminations. Assessment on procedures on GMP, GHP and HACCP were followed by a specific valuation of food handlers training based on a questionnaire .The results show that in small and less developed food industries there is a lack in considering fecal-oral route contaminations and an important need of correct training aimed principally at improving knowledge of Good Hygienic Practices and contamination of food.

  5. Epidemiologic investigation of a Yersinia camp outbreak linked to a food handler.

    Science.gov (United States)

    Morse, D L; Shayegani, M; Gallo, R J

    1984-06-01

    In July 1981, an outbreak of gastroenteritis occurred at a summer diet camp. Of the 455 campers and staff, 35 per cent developed an illness characterized by abdominal pain, fever, diarrhea, and/or nausea and vomiting. A total of 53 per cent experienced abdominal pain. Seven persons were hospitalized, five of whom had appendectomies. Yersinia enterocolitica serogroup 0:8 was isolated from 37 (54 per cent) of 69 persons examined, including the camp cook and three assistants. An epidemiologic investigation demonstrated that illness was associated with consumption of reconstituted powdered milk and/or chow mein . Y. enterocolitica serogroup 0:8 was subsequently isolated from milk, the milk dispenser, and leftover chow mein . Information obtained during the investigation suggested that the Yersinia had been introduced by a food handler during food-processing procedures.

  6. Hepatitis A Cases Among Food Handlers: A Local Health Department Response-New York City, 2013.

    Science.gov (United States)

    Ridpath, Alison; Reddy, Vasudha; Layton, Marcelle; Misener, Mark; Scaccia, Allison; Starr, David; Stavinsky, Faina; Varma, Jay K; Waechter, HaeNa; Zucker, Jane R; Balter, Sharon

    During 2013, the New York City Department of Health and Mental Hygiene (DOHMH) received reports of 6 hepatitis A cases among food handlers. We describe our decision-making process for public notification, type of postexposure prophylaxis (PEP) offered, and lessons learned. For 3 cases, public notification was issued and DOHMH offered only hepatitis A vaccine as PEP. Subsequent outbreaks resulted from 1 case for which no public notification was issued or PEP offered, and 1 for which public notification was issued and PEP was offered too late. DOHMH continues to use environmental assessments to guide public notification decisions and offer only hepatitis A vaccine as PEP after public notification but recognizes the need to evaluate each situation individually. The PEP strategy employed by DOHMH should be considered because hepatitis A vaccine is immunogenic in all age groups, can be obtained by local jurisdictions more quickly, and is logistically easier to administer in mass clinics than immunoglobulin.

  7. Knowledge and Perception of Consumption of Iodized Salt Among Food Handlers in Southern Ethiopia.

    Science.gov (United States)

    Haji, Yusuf; Abdurahmen, Junayde; Paulos, Wondimagegn

    2016-01-01

    Iodine deficiency is the world's single most important cause of preventable mental retardation. In Ethiopia, the knowledge and perception of food handlers toward the iodized salt consumption (ISC) was very low. To assess knowledge and perception of food handlers toward consumption of iodized salt in Wolaita Sodo town and Sodo Zuria woreda, 2014. The community-based cross-sectional study design was done from May 10 to May 30, 2014 in Sodo town and Sodo Zuria woreda (district), Wolaita zone, southern Ethiopia. Systematic sampling techniques were used to identify study participants. Data entered into the software Epi Info version 3.5.3 and analyzed using the software SPSS version 16. To assess an association, odds ratio was used at 95% confidence interval, whereas confounding was controlled by employing multivariate logistic regression. Lower knowledge and perception on iodine deficiency was observed. About 239 (44.7%) of the respondents had good knowledge and 228 (42.6%) had positive attitude toward consumption of iodized salt. Most (346, 64.7%) of the participants had heard about goiter, whereas only 170 (31.8%) of them associated it with iodine deficiency. About 46.4% of respondents heard about iodized salt. Respondents' age, education, family income, place of residence, and occupation had significant association with good knowledge and positive attitude toward consumption of iodized salt. The study revealed the existence of knowledge and perception gap in iodine deficiency disorder and ISC. Household income, education of respondents, and place of residence were determinant factors for poor knowledge and perception of iodized salt. Therefore, efforts to scale-up the knowledge and perception toward ISC should focus on households with low income, educational level, and rural residence.

  8. Demonstration of Intelligent Control and Fan Improvements in Computer Room Air Handlers

    Energy Technology Data Exchange (ETDEWEB)

    Coles, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Greenberg, Steve [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Vita, Corinne [Vigilent, Oakland, CA (United States)

    2012-11-30

    This report documents a demonstration of the energy-efficiency improvement provided by a new control system for computer room air handling devices. It also analyzes measured and reported air handling device fan power associated with changing the fan type. A 135,000 square foot commercial data center was used for the demonstration. All air handling units were upgraded with improved efficiency fans, and a control system that automatically adjusts the fan speed for the air handling units was added. Power measurements were collected for a baseline and for a period with the fan speed control system active. Changing the fan type resulted in a savings of 47 percent of energy used by the air handling equipment and associated chiller plant energy needed to cool the air handlers themselves. The addition of the fan speed control resulted in an additional 37 percent savings in the same two categories. The combined savings for the two improvements for the same categories was 66 percent compared to the data center fitted with the original fans without a control system. The energy use reduction provided by the complete air handling device improvement program for the whole data center site is estimated to be 2.9 million kilowatt hours per year—an overall data center site savings of 8.0 percent. The reduced electrical energy use at the site provides a 1.9 million pound yearly reduction of carbon dioxide emissions. This demonstration showed that fan upgrades and a control system addition provide cost-effective improvements for data centers, with a payback reported to be under two years without utility incentives. In addition to the control system providing energy savings, the data collection and visual analysis capabilities provided immediate and long-term benefits. It is recommended that data center operators consider investing in fan upgrades and/or adding fan speed control for computer room air handlers.

  9. Advanced inspection technology for non intrusive inspection (NII) program

    International Nuclear Information System (INIS)

    Zamir Mohamed Daud

    2003-01-01

    In the current economic environment, plants and facilities are under pressure to introduced cost saving as well as profit maximising measures. Among the many changes in the way things are run is a move towards Risk Based Inspection (RBI), with an emphasis on longer operating periods between shutdowns as well as to utilise components to their maximum capability. Underpinning and RBI program requires good data from an effective online inspections program, which would not require the shutdown of critical components. One methodology of online inspection is known as Non Intrusive Inspection (NII), an inspection philosophy with the objective of replacing internal inspection of a vessel by doing Non Destructive Testing (NDT) and inspections externally. To this end, a variety of advanced NDT techniques are needed to provide accurate online measurements. (Author)

  10. Overview of the software inspection process

    Energy Technology Data Exchange (ETDEWEB)

    Lane, G.L.; Dabbs, R. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

  11. Waste Inspection Tomography (WIT)

    International Nuclear Information System (INIS)

    Bernardi, R.T.

    1995-01-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU. The mobile feature of WIT allows inspection technologies to be brought to the nuclear waste drum storage site without the need to relocate drums for safe, rapid, and cost-effective characterization of regulated nuclear waste. The combination of these WIT characterization modalities provides the inspector with an unprecedented ability to non-invasively characterize the regulated contents of waste drums as large as 110 gallons, weighing up to 1,600 pounds. Any objects that fit within these size and weight restrictions can also be inspected on WIT, such as smaller waste bags and drums that are five and thirty-five gallons

  12. Recurrent inspection of tubes

    International Nuclear Information System (INIS)

    Andersson, S.

    1984-01-01

    Recommendations concerning the selection of areas for the inspection of tubes have been outlined. The aim is to focus the control on the regions which are important for the safety and where damage is supposed to take place. The number of zones will depend on the risk factors as judged by experts. The localizing will be based upon probable damaging mechanisms. A certain number of areas should be chosen at random. (G.B.)

  13. Regulatory inspection in Spain

    International Nuclear Information System (INIS)

    Alvarez de Buergo, L.

    1977-01-01

    The 1964 Act on Nuclear Energy lays down that the Junta de Energia Nuclear is responsible for assessing the hazards of and inspecting nuclear power plants as well as for the transport of nuclear fuel for these plants. The Junta de Energia Nuclear has a specialised service, the Nuclear Safety Department in charge of performing these duties. Experience acquired from work in this field is analysed in this paper. (NEA) [fr

  14. Infrared microscope inspection apparatus

    Science.gov (United States)

    Forman, Steven E.; Caunt, James W.

    1985-02-26

    Apparatus and system for inspecting infrared transparents, such as an array of photovoltaic modules containing silicon solar cells, includes an infrared microscope, at least three sources of infrared light placed around and having their axes intersect the center of the object field and means for sending the reflected light through the microscope. The apparatus is adapted to be mounted on an X-Y translator positioned adjacent the object surface.

  15. LiDAR-based 2D Localization and Mapping System using Elliptical Distance Correction Models for UAV Wind Turbine Blade Inspection

    DEFF Research Database (Denmark)

    Nikolov, Ivan Adriyanov; Madsen, Claus B.

    2017-01-01

    The wind energy sector faces a constant need for annual inspections of wind turbine blades for damage, erosion and cracks. These inspections are an important part of the wind turbine life cycle and can be very costly and hazardous to specialists. This has led to the use of automated drone inspect...

  16. OSE inspections: A different perspective

    International Nuclear Information System (INIS)

    Ware, J.H.

    1987-01-01

    The Office of Security Evaluation (OSE) is a staff activity of the Assistant Secretary for Defense Programs (ASDP) and is responsible for the conduct of an inspection and evaluation program. The OSE Inspection Division conducts assessments of the effectiveness of Department of Energy (DOE) Safeguards and Security policies and protection programs. The inspections are conducted by OSE Inspectors and Support Specialists. Prior to the author's participation in the inspection of the San Francisco Operations Office, a DOE Field Office employee had never played an active role in an OSE Inspection of another field office. This paper discloses his experience as an OSE Inspector

  17. Terahertz Radome Inspection

    Directory of Open Access Journals (Sweden)

    Fabian Friederich

    2018-01-01

    Full Text Available Radomes protecting sensitive radar, navigational, and communications equipment of, e.g., aircraft, are strongly exposed to the environment and have to withstand harsh weather conditions and potential impacts. Besides their significance to the structural integrity of the radomes, it is often crucial to optimize the composite structures for best possible radio performance. Hence, there exists a significant interest in non-destructive testing techniques, which can be used for defect inspection of radomes in field use as well as for quality inspection during the manufacturing process. Contactless millimeter-wave and terahertz imaging techniques provide millimeter resolution and have the potential to address both application scenarios. We report on our development of a three-dimensional (3D terahertz imaging system for radome inspection during industrial manufacturing processes. The system was designed for operation within a machining center for radome manufacturing. It simultaneously gathers terahertz depth information in adjacent frequency ranges, from 70 to 110 GHz and from 110 to 170 GHz by combining two frequency modulated continuous-wave terahertz sensing units into a single measurement device. Results from spiraliform image acquisition of a radome test sample demonstrate the successful integration of the measurement system.

  18. Planning of the regulatory inspection activity during manufacturing, construction and operation of the Italian nuclear plants

    International Nuclear Information System (INIS)

    Messore, G.A.

    1977-01-01

    After a brief review of the provisions in force in Italy on the inspection of nuclear installations the paper deals with the main criteria which determine the general and annual inspection programmes for every nuclear installation and the procedures for recording the results of inspections. It also describes the classification of nuclear installations into different categories according to the degree of hazard presented by their respective activities and consequently, the selection of the minimum number of inspections to be conducted every year for each of these categories. (NEA) [fr

  19. Pressurized water reactor inspection procedures

    International Nuclear Information System (INIS)

    Heinrich, D.; Mueller, G.; Otte, H.J.; Roth, W.

    1998-01-01

    Inspections of the reactor pressure vessels of pressurized water reactors (PWR) so far used to be carried out with different central mast manipulators. For technical reasons, parallel inspections of two manipulators alongside work on the refueling cavity, so as to reduce the time spent on the critical path in a revision outage, are not possible. Efforts made to minimize the inspection time required with one manipulator have been successful, but their effects are limited. Major reductions in inspection time can be achieved only if inspections are run with two manipulators in parallel. The decentralized manipulator built by GEC Alsthom Energie and so far emmployed in boiling water reactors in the USA, Spain, Switzerland and Japan allows two systems to be used in parallel, thus reducing the time required for standard inspection of a pressure vessel from some six days to three days. These savings of approximately three days are made possible without any compromises in terms of positioning by rail-bound systems. During inspection, the reactor refueling cavity is available for other revision work without any restrictions. The manipulator can be used equally well for inspecting standard PWR, PWR with a thermal shield, for inspecting the land between in-core instrumentation nozzles, BWR with and without jet pumps (complementary inspection), and for inspecting core support shrouds. (orig.) [de

  20. US Nuclear Regulatory Commission 1983 annual report

    International Nuclear Information System (INIS)

    1984-01-01

    The thirteen chapters of this annual report are titled: 1983 highlights/1984 planning; reactor regulation; cleanup at TMI-2; operational experience; nuclear materials; safeguards; waste management; inspection, enforcement and emergency preparedness; cooperation with the states; international programs; nuclear regulatory research; proceedings and litigation; and management and communication

  1. An epidemiological study on the predictors of health status of food handlers in food establishments of teaching hospitals of North India.

    Science.gov (United States)

    Singh, Arun; Katyal, Rashmi; Chaudhary, Varsha; Narula, Kusum; Upadhayay, Deepak; Singh, Shailendra Pratap

    2015-01-01

    The US Centers for Disease Control and Prevention (USDHHS-CDC 1996) revealed that the outbreaks of food borne diseases include inadequate cooking, heating, or re-heating of foods consumption of food from unsafe sources, cooling food inappropriately and allowing too much of a time lapse. As we all know that the food handlers have been working in various types of community kitchen and their health status can affect the status of food hygiene which can lead to contamination of foods attributing to acute gastroenteritis and food poisoning in various subgroups of the population e.g., medical/dental/nursing students. The background characteristics of these food handlers may have important role to affect health status of these handlers. The indexed study was carried out among the food handlers working in the food establishments the 5 teaching hospitals of Bareilly city in U.P. India during one year i.e., from August 2013 to July 2014. The survey method using schedule was conducted to get information about the background characteristics and food handlers and each food handler was examined clinically for assessing health status. Chi-Square test was used as test of significance and regression analysis was also done to nullifying the effect of confounders. The health status of the mess workers was found to be significantly associated with use of gloves, hand washing after toilet and hand washing before cooking and serving food. The rationale of this study was that though many studies have been carried out to show the health status of the food handlers and their background characteristics, no study has highlighted the association of these background characteristics and personal hygiene practices with the health status of food handlers.

  2. 2005 Annual report

    International Nuclear Information System (INIS)

    2006-01-01

    This annual report presents information on the activities, on the scope of the radiation protection and nuclear safety, of the Nuclear Regulatory Authority (ARN) of the Argentina during 2005. The main topics are the water measurements associated with the expert's report of Ezeiza, the emergency systems, the environmental control, the institutional relations and the non-proliferation, the training and the public information, the safeguards and the physical protection, the quality assurance in the ARN, the environmental monitoring, and the human and economic resources. Also, this publication has annexes with the following content: the regulatory framework; regulatory documents; inspections to medical, industrial and training installations; international expert's report on the application of the radiological protection international standards of the public at the Ezeiza Atomic Center zone; ethical code

  3. KWO annual report 1986

    International Nuclear Information System (INIS)

    Koerner, C.

    1987-01-01

    The Obrigheim nuclear power station was operated at full load during the year 1986; 7869 operating hours procuded electrical energy of 2795 GWh. This is the best annual result during Obrigheim's operating period. Since commissioning in October 1968, 131595 hours of operation have generated 44074 GWh (gross) and from test operation in March 1969 until the end of 1986, 131179 hours of operation have generated 43,962 GWh. This is an availability of power of 81.5% in this period and a time availability of 83.9%. In 1986, the plant was shut down for 807 hours for the 17th refueling including refurbishing, inspection and repair work. Apart from refueling, the plant had a good time availability and therefore contributed 5% to the safe, economical and environmentally acceptable electricity supply of the Land Baden-Wuerttemberg. (orig./HP) [de

  4. SmartInspect: Smart Contract Inspection Technical Report

    OpenAIRE

    Bragagnolo , Santiago; Rocha , Henrique ,; Denker , Marcus; Ducasse , Stéphane

    2017-01-01

    Smart contracts are embedded procedures stored with the data they act upon. Debugging deployed Smart Contracts is a difficult task since once deployed, the code cannot be reexecuted and inspecting a simple attribute is not easily possible because data is encoded. In this technical report, we present SmartInspect to address the lack of inspectability of a deployed contract. Our solution analyses the contract state by using decompilation techniques and a mirror-based architecture to represent t...

  5. Shell Inspection History and Current CMM Inspection Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-26

    The following report provides a review of past and current CMM Shell Inspection efforts. Calibration of the Sheffield rotary contour gauge has expired and the primary inspector, Matthew Naranjo, has retired. Efforts within the Inspection team are transitioning from maintaining and training new inspectors on Sheffield to off-the-shelf CMM technology. Although inspection of a shell has many requirements, the scope of the data presented in this report focuses on the inner contour, outer contour, radial wall thickness and mass comparisons.

  6. Safeguards management inspection procedures

    International Nuclear Information System (INIS)

    Barth, M.J.; Dunn, D.R.

    1984-08-01

    The objective of this inspection module is to independently assess the contributions of licensee management to overall safeguards systems performance. The inspector accomplishes this objective by comparing the licensee's safeguards management to both the 10 CFR, parts 70 and 73, requirements and to generally accepted management practices. The vehicle by which this comparison is to be made consists of assessment questions and key issues which point the inspector to areas of primary concern to the NRC and which raise additional issues for the purpose of exposing management ineffectiveness. Further insight into management effectiveness is obtained through those assessment questions specifically directed toward the licensee's safeguards system performance. If the quality of the safeguards is poor, then the inspector should strongly suspect that management's role is ineffective and should attempt to determine management's influence (or lack thereof) on the underlying safeguards deficiencies. (The converse is not necessarily true, however.) The assessment questions in essence provide an opportunity for the inspector to identify, to single out, and to probe further, questionable management practices. Specific issues, circumstances, and concerns which point to questionable or inappropriate practices should be explicitly identified and referenced against the CFR and the assessment questions. The inspection report should also explain why the inspector feels certain management practices are poor, counter to the CFR, and/or point to ineffecive management. Concurrent with documenting the inspection results, the inspector should provide recommendations for alleviating observed management practices that are detrimental to effective safeguards. The recommendations could include: specific changes in the practices of the licensee, followup procedures on the part of NRC, and proposed license changes

  7. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K.

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks

  8. Sources of calicivirus contamination in foodborne outbreaks, Denmark, 2005-2011 - the role of the asymptomatic food handler

    DEFF Research Database (Denmark)

    Franck, Kristina T.; Lisby, Morten; Fonager, Jannik

    2015-01-01

    Background. Norovirus is the predominant cause of foodborne disease outbreaks. Virus contamination may occur during all steps of food processing from production to preparation and serving. The relative importance of these different routes of contamination is unknown. Methods. The purpose...... of contamination. Results. In 64 (34%) of the outbreaks, contamination from food handlers took place during preparation or serving of food. In the majority of these outbreaks (n=41; 64%), the food handlers were asymptomatic during food handling. Some had been in contact with ill household members before handling...... the food and remained asymptomatic; others developed symptoms shortly after or were post-symptomatic. In 51 (27%) of the outbreaks, contamination occurred during production of the food and in 55 (29%) of the outbreaks, contamination had supposedly occurred after serving via a guest at a self-serving buffet...

  9. Acoustic inspection device

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, Aaron A.; Burghard, Brion J.; Skorpik, James R.; Pappas, Richard A.; Mullen, O. Dennis; Samuel, Todd J.; Reid, Larry D.; Harris, Joe C.; Valencia, Juan D.; Smalley, Jonathan T.; Shepard, Chester L.; Taylor, Theodore T.

    2005-09-06

    An ultrasound inspection apparatus particularly adapted to examine containers (sealed or unsealed) containing a liquid or solid bulk material. The apparatus has an overall configuration of a hand held pistol with a front transducer contact surface that is positioned against a front wall of the container. An ultrasound pulse is transmitted from the apparatus to be reflected from a back wall of a container being investigated. The received echo pulse is converted to a digital waveform. The waveform is analyzed relative to temperature, travel distance of the pulse(s), and time of travel to ascertain characteristics of the liquid or other materials and to provide identification of the same.

  10. 'Bringing respite in the burden of illness' - dog handlers' experience of visiting older persons with dementia together with a therapy dog.

    Science.gov (United States)

    Swall, Anna; Ebbeskog, Britt; Lundh Hagelin, Carina; Fagerberg, Ingegerd

    2016-08-01

    To illuminate meanings of the lived experiences of dog handlers' when visiting older persons with dementia with their therapy dog. Studies indicate that care of persons with dementia should focus on a person-centred approach with the person's interests in the centre. Animal-assisted therapy using a therapy dog in the care of persons with dementia has been shown to increase well-being and decrease problematic behaviours associated with the illness. A qualitative lifeworld approach was adopted for this study. Data were collected from open-ended interviews with nine dog handlers, and the analysis conducted using the phenomenological hermeneutical method. The structural analysis resulted in one theme, 'Respite from the burden of illness for persons with dementia'. Visiting a person with dementia can be seen as an act of caring, providing temporary respite from their illness, and creating a special relationship between handler and patient. A therapy dog visit can represent a moment of communion between the handler and the person with dementia. Dog handlers use their skills and knowledge to promote a situation that reduces symptoms of illness and encourages healthier behaviour. The results of this study may be of interest to researchers, clinical practitioners, caregivers and dog handlers who care for persons with dementia using therapy dog teams on prescription as an alternative method to minimise behavioural and psychological symptoms of dementia. © 2016 John Wiley & Sons Ltd.

  11. 1997 Annual report; 1997 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This annual report present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1997. The activities are developed in 11 chapters and 1 appendix, were are descripting the activities and the bases of the Argentine Regulatory System. The following chapters and the appendix are: 1.-Evolution of the nuclear regulatory activities in the Argentina. 2.-Regulatory system, laws and regulations. 3.-Institutional relations with national and international organizations. 4.-Inspections and evaluations of the nuclear reactors. 5.-Inspections and evaluations of the radioactive facilities. 6.-Inspections and evaluations of safeguards and physical protection. 7.-Radiation control of the occupational and public doses. 8.-Radiological emergencies. 9.-Projects and tasks scientific-technological. 10.-Training courses and meetings. 11.-Economic and human recourses. Appendix.- Inspections of radioactive facilities figs., tabs.

  12. Inspection of internal tank welds using the ACFM inspection method

    International Nuclear Information System (INIS)

    Topp, D.A.; Lugg, M.C.

    2009-01-01

    The paper describes recent developments of the ACFM technique and describes several case studies where ACFM has been used to inspect the internal plate welds on large steel storage tanks in refineries. For weld inspection, conventional methods such as magnetic particle inspection or vacuum box testing are generally used. This paper presents comparisons of the results from ACFM with those from the conventional methods, from which conclusions are drawn as to the benefits this technique offers in terms of cost, time savings and inspection reliability. (author)

  13. INSPECT: a package of computer programs for planning safeguards inspections

    International Nuclear Information System (INIS)

    Wincek, M.A.; Mullen, M.F.

    1979-04-01

    As part of the U.S. program to provide technical assistance to the International Atomic Energy Agency, a package of computer programs was developed for use in planning safeguards inspections of various types of nuclear facilities. The INSPECT software package is a set of five interactive FORTRAN programs which can be used to calculate the variance components of the MUF (Material Unaccounted For) statistic, the variance components of the D (difference) statistic, attribute and variables sampling plans, a measure of the effectiveness of the inspection, and a measurement of the cost of implementing the inspection plan. This report describes the programs and explains how to use them

  14. A new estimate of the impact of OSHA inspections on manufacturing injury rates, 1998-2005.

    Science.gov (United States)

    Haviland, Amelia M; Burns, Rachel M; Gray, Wayne B; Ruder, Teague; Mendeloff, John

    2012-11-01

    A prior study indicated that the effect of OSHA inspections on lost workday injuries had declined from 1979 through 1998. This study provides an updated estimate for 1998-2005. Injury data from the Pennsylvania workers' compensation program were linked with employment data from unemployment compensation records to calculate lost-time rates for single-establishment manufacturing firms with more than 10 employees. These rates were linked to OSHA inspection findings. The RAND Human Subjects Protection Committee determined that this study was exempt from review. Inspections with penalties reduced injuries by an average of 19-24% annually in the 2 years following the inspection. These effects were not found for workplaces with fewer than 20 or more than 250 employees or for inspections without penalties. These findings should be generalizable to the 29 states where federal OSHA directly enforces standards. They suggest that the impact of inspections has increased from the 1990s. Copyright © 2012 Wiley Periodicals, Inc.

  15. Results of calendar year 1995 Well Inspection and Maintenance Program Y-12 Plant, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    McMaster, B.W.

    1996-07-01

    This document is a compendium of results of the 1995 Monitor Well Inspection and Maintenance Program at the US Department of Energy's Oak Ridge Y-12 Plant. This report documents the work relating to well inspections and maintenance requests. Inspections are implemented in order to better assess the condition and maintenance needs of wells that are actively being monitored. Currently this approach calls for inspecting all wells on a routine (annual or triennial) basis which are: (1) in an active sampling program; (2) included in a hydrologic study; or (3) not in service, but not scheduled for plugging and abandonment. Routine inspections help to ensure that representative groundwater samples and hydrologic data are being collected, and contribute to the effective longevity of each well. This report formally presents well inspection and maintenance activities that were conducted at the Y-12 Plant from August through December 1995

  16. Socio-demographic Characteristics and Food Hygiene Level Assessment of Food Handlers in Cafeterias around a Federal University in Nigeria

    OpenAIRE

    C. E. Aruwa; A. J. Akindusoye; S. I. Awala

    2017-01-01

    Background and Objective: Globally, food hygiene/food borne illnesses remain subjects of great concern. This study sought to assess the knowledge, attitude and practice of food hygiene; and to determine the types, prevalence and load of microbial isolates among food handlers’ in cafeterias around a University in South-Western Nigeria. It also highlighted the socio-demographic characteristics of food handlers/respondents. Study Design: A cross sectional descriptive design was used, followe...

  17. Sleep Quality of Call Handlers Employed in International Call Centers in National Capital Region of Delhi, India

    Directory of Open Access Journals (Sweden)

    JD Raja

    2016-10-01

    suspicion of insomnia or suspected insomnia; the rest had no sleep problem. Smoking, poor social support, heavy workload, lack of relaxation facility at office, and prolonged travel time to office were independent predictors of sleep quality (p<0.05. Conclusion: Call handlers have to compromise upon their sleep owing to the contemporary work settings in call centers. Safeguarding their health becomes an occupational health challenge to public health specialists.

  18. Knowledge, attitudes and practices evaluation on food hygiene and safety among perishable food handlers from a hypermarket in Portugal

    OpenAIRE

    Pereira, Ermelinda; Pires, Delphine Elisa; Ramalhosa, Elsa

    2014-01-01

    The main objective of this study was to evaluate in loco the practices followed by the food handlers in three sections of a hypermarket, namely, butcher’s, charcuterie and fishery, as well as their level of knowledge, attitudes and practices in food hygiene and safety through the application of questionnaires. At the end it was also intended to relate the results with the training and professional experience, as well as demographic characteristics, such as sex, age and education level of food...

  19. An evaluation of a weightlifting belt and back injury prevention training class for airline baggage handlers.

    Science.gov (United States)

    Reddell, C R; Congleton, J J; Dale Huchingson, R; Montgomery, J F

    1992-10-01

    This study evaluated the efficacy of a commercially available weightlifting belt in relation to reduction of lumbar injury incident rate and severity of injuries over an 8-month period. The study used 642 baggage handlers working for a major airline company as participants. Four treatment groups were randomly selected: a group receiving the belt only, a group receiving a 1 h training class only, a group receiving both a belt and a 1 h training class, and a control group receiving nothing. Two treatment groups were added which contained participants who discontinued use of the belt prior to the end of an 8-month study period. Results indicated that there were no significant differences for total lumbar injury incident rate, restricted workday case injury incident rate, lost workdays and restricted workdays rate, and worker's compensation rates. There was, however, a marginal significant difference for lost workday case injury incident rate. Groups with participants who wore the belt for a while then discontinued its use had a higher lost day case injury incident rate than did either the group receiving training only or the control group. Compliance was an overriding factor as the belt questionnaire response indicated that 58% of participants in the belt groups discontinued use of the belt before the end of 8 months. Comments made on the survey forms indicated that the belt was too hot. Similarly, comments suggested that the belt rubbed, pinched, and bruised ribs. Based on these results, the weightlifting belt used for this study cannot be recommended for use in aid of lifting during daily work activities of baggage handlers. Results indicate that use of the belts may, in fact, increase the risk of injury when not wearing a belt following a period of wearing a belt. As industries are experimenting with the use of belts, it is recommended that great care be taken in any further evaluation and close attention directed towards injuries which occur when not wearing the

  20. Endoscopic inspection of steam turbines

    International Nuclear Information System (INIS)

    Maliniemi, H.; Muukka, E.

    1990-01-01

    For over ten years, Imatran Voima Oy (IVO) has developed, complementary inspection methods for steam turbine condition monitoring, which can be applied both during operation and shutdown. One important method used periodically during outages is endoscopic inspection. The inspection is based on the method where the internal parts of the turbine is inspected through access borings with endoscope and where the magnified figures of the internal parts is seen on video screen. To improve inspection assurance, an image-processing based pattern recognition method for cracks has been developed for the endoscopic inspection of turbine blades. It is based on the deduction conditions derived from the crack shape. The computer gives an alarm of a crack detection and prints a simulated image of the crack, which is then checked manually

  1. Prevalence of intestinal parasitic infections in certified food-handlers working in food establishments in the City of Nairobi, Kenya.

    Science.gov (United States)

    Kamau, Paul; Aloo-Obudho, Penina; Kabiru, Ephantus; Ombacho, Kepha; Langat, Bernard; Mucheru, Obadiah; Ireri, Laban

    2012-03-01

    Most intestinal parasites are cosmopolitan with the highest prevalence in the tropics and subtopics. Rural-to-urban migration rapidly increases the number of food eating places in towns and their environs. Some of these eating estabishments have poor sanitation and are overcrowded, facilitating disease transmission, especially through food-handling. Our investigations in Nairobi, therefore, were set to determine the presence of intestinal parasites in food-handlers with valid medical certificates. Direct and concentrated stool processing techniques were used. Chisquare test and ANOVA were used for data analysis. The parasites Ascaris lumbricoides, Entamoeba histolytica and Giardia lamblia were observed in certified food-handlers. Significant difference was found in parasite frequency by eating classes and gender (χ(2) = 9.49, P = 0.73), (F = 1.495, P = 0.297), but not in parasite occurrence between age brackets (χ(2) = 6.99, P = 0.039). The six-month medical certificate validity period may contribute significantly to the presence of intestinal parasites in certified food-handlers.

  2. Occupational Exposure to Infection: A study on Healthcare Waste Handlers of a Tertiary Care Hospital in South India.

    Science.gov (United States)

    Shivalli, Siddharudha; Sowmyashree, H

    2015-11-01

    Occupational exposure to infection is an important public health concern. Such accidents are associated with a few, but pose significant risk to worker's health, family and the community. 1) To assess the knowledge and attitude of waste handlers regarding healthcare waste management in tertiary care hospital of Mangalore. 2) To assess the occupational risk of exposure to infection in their work setting. A cross-sectional study was conducted among healthcare waste handlers (involved in collection, storage and safe disposal) in a tertiary care hospital of Mangalore, India. A semi-structured and pre-tested proforma was used to assess respondents' knowledge and percentage score was calculated based on a scoring system. Chi square and independent sample t tests were applied to judge the association of study variables with knowledge and occupational risk of infection. A total of 43 healthcare waste handlers participated in the study and all were females. Almost half of them had poor knowledge (healthcare waste management. As much as 41.8% of them had exposure to healthcare waste and 'needle stick injury' was the most common type. Age, literacy and experience did not significantly (p>0.05) influence the knowledge and occupational risk of infection. Respondents' knowledge regarding healthcare waste management was unsatisfactory. They were at high risk of occupational exposure to infection. It emphasizes the need of refresher training and reinforcement of personal protection measures in their work setting. © Journal of the Association of Physicians of India 2011.

  3. Waste inspection tomography (WIT)

    Energy Technology Data Exchange (ETDEWEB)

    Bernardi, R.T. [Bio-Imaging Research, Inc., Lincolnshire, IL (United States)

    1995-10-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU.

  4. Waste inspection tomography (WIT)

    International Nuclear Information System (INIS)

    Bernardi, R.T.

    1995-01-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU

  5. Inspections - a cost effective approach

    International Nuclear Information System (INIS)

    Joseph, C.

    1981-01-01

    This paper describes a cost effective approach for inspections of Computerized Nuclear Materials Control and Accounting Systems (CNMCAS). Highlighted is the capability to conduct an inspection program via portable telephone terminals from off-site locations. The program can be applied to various materials management functions including materials control, quality assurance, and materials accounting. The system is designed to facilitate inspections by both external and internal groups

  6. Inspection system performance test procedure

    International Nuclear Information System (INIS)

    Jensen, C.E.

    1995-01-01

    This procedure establishes requirements to administer a performance demonstration test. The test is to demonstrate that the double-shell tank inspection system (DSTIS) supplied by the contractor performs in accordance with the WHC-S-4108, Double-Shell Tank Ultrasonic Inspection Performance Specification, Rev. 2-A, January, 1995. The inspection system is intended to provide ultrasonic (UT) and visual data to determine integrity of the Westinghouse Hanford Company (WHC) site underground waste tanks. The robotic inspection system consists of the following major sub-systems (modules) and components: Mobile control center; Deployment module; Cable management assembly; Robot mechanism; Ultrasonic testing system; Visual testing system; Pneumatic system; Electrical system; and Control system

  7. Experience on inspection at PFPF

    International Nuclear Information System (INIS)

    Aoki, I.; Yamamoto, Y.; Takahashi, Saburo; Ooshima, Hirofumi; Kuniyasu, Kazufusa.

    1993-01-01

    In order to reduce a personal radiation exposure, Plutonium Fuel Production Facility (PFPF) introduced an automated MOX fabrication technology. Safeguards system for the PFPF was designed and installed so as to be compatible with automated process operation as much as possible. Introduction of these system in PFPF made possible to do the inspection measurements with unattended mode and Near Real Time Material Accountancy (NRTA), consequently inspection has been carrying out effectively and efficiently. This paper describes the new Inspection activities as a comparison with old Inspection activities based on our experience. (author)

  8. PWR vessel inspection performance improvements

    International Nuclear Information System (INIS)

    Blair Fairbrother, D.; Bodson, Francis

    1998-01-01

    A compact robot for ultrasonic inspection of reactor vessels has been developed that reduces setup logistics and schedule time for mandatory code inspections. Rather than installing a large structure to access the entire weld inspection area from its flange attachment, the compact robot examines welds in overlapping patches from a suction cup anchor to the shell wall. The compact robot size allows two robots to be operated in the vessel simultaneously. This significantly reduces the time required to complete the inspection. Experience to date indicates that time for vessel examinations can be reduced to fewer than four days. (author)

  9. Multidrug Resistant Salmonella typhi in Asymptomatic Typhoid Carriers among Food Handlers in Namakkal District, Tamil Nadu

    Directory of Open Access Journals (Sweden)

    Senthilkumar B

    2005-01-01

    Full Text Available Purpose: to screen Salmonella typhi in asymptomatic typhoid carriers and to find out drug resistance and ability of the strains to transmit drug resistance to other bacteria. Methods: Cultural characters, biochemical tests, antibiotic sensitivity test (disc diffusion, agarose gel electrophoresis, and conjugation protocols were done. Thirty five stool samples were collected from the suspected food handlers for the study. Results: Among 35 samples, (17.14% yielded a positive result. Out of these 4 (20.0% were women and 2 (13.33% were men. The isolates were tested with a number of conventional antibiotics viz, amikacin, amoxicillin, ampicillin, chloramphenicol, ciprofloxacin, co-trimaxazole, rifampicin, gentamicin, nalidixic acid, ofloxacin and tetracycline. Five isolates were having the multidrug resistant character. Four (66.66% multidrug resistant isolates were found to have plasmids, while one (16.66% multidrug resistant isolate had no plasmid and the chromosome encoded the resistance. Only one strain (16.66% showed single antibiotic resistance in the study and had no plasmid DNA. The molecular weights of the plasmids were determined and found to be 120 kb.The mechanism of spreading of drug resistance through conjugation process was analyzed. In the conjugation studies, the isolates having R+ factor showed the transfer of drug resistance through conjugation, which was determined by the development of antibiotic resistance in the recipients. Conclusion: This study shows that drug resistant strains are able to transfer genes encoding drug resistance.

  10. Prevalence and risk factors for intestinal parasites in food handlers, southern Brazil.

    Science.gov (United States)

    Colli, Cristiane Maria; Mizutani, Angelica Sayuri; Martins, Vanessa Aparecida; Ferreira, Erika Cristina; Gomes, Mônica Lúcia

    2014-01-01

    In this study, the prevalence and risk factors for enteroparasites were determined in food handlers from Maringá, Paraná State, southern Brazil. Fecal and subungual materials of 150 street food vendors were analyzed by the methods of Lutz, Faust, and Mello, respectively. A questionnaire on hygiene and sanitary conditions of the workplace and of domicile was applied. The prevalence of enteroparasites was 28%, and the protozoa infection was more expressive (21.3%) than by helminths (6.7%), but without significant difference (p > 0.05). Entamoeba coli was the most frequent species occurring in 15.3%, while the prevalence of protozoa pathogenic was low (Giardia lamblia: 2.7% and Entamoeba histolytica: 0.7%). The subungual material presented negative results. The presence of pets in domiciles has increased twice the risk of infection. The working conditions of the majority of street food vendors were inappropriate. The results highlight the need for more rigorous programs of continuing education, parasitological examination every six months, and health surveillance. In this way, the quality of the service provided to the population can be improved and the transmission of food-borne diseases can be prevented.

  11. Them that believe: a postmodern exploration of the contemporary Christian serpent-handlers of Appalachia

    Directory of Open Access Journals (Sweden)

    Ralph W. Hood

    2009-01-01

    Full Text Available The call for a new paradigm is loud and clear and consistent with postmodern methods. They are no gold standard to be applied to all investigations; no master narrative to be defended. Interdisciplinary, as the author tries to demonstrate, can mean not only cooperation among disciplines, but also the use of a variety of often discipline favoured methods by a single investigator or a team of investigators whose location within a particular ‘discipline’ is both historically contingent and likely dated in terms of its usefulness. Likewise, the use of multilevel considerations means that the diversity of methods and approaches at various levels of abstraction are necessary to begin any study of religious phenomena in their immense complexity. This study of serpent handlers focuses upon archival research; hermeneutical explorations of textual criticism of the Bible; ethnography linked to videotapes; phenomenological interviews analyzed in terms of a hermeneutical method that reveals the meaningfulness of handling serpents, being anointed, and the experience of near death from serpent bites. The author is committed to exploring the meaning of serpent handling from personal and cultural perspectives, and also takes into account psychological theories to link the symbolic and sign value of serpents that further does justice to the power of the serpent to elicit genuine religious experiences and to serve as an apologetic for a tradition that has been maligned and misunderstood by lay persons and scholars alike.

  12. Musculoskeletal symptoms and ergonomic hazards among material handlers in grocery retail industries

    Science.gov (United States)

    Nasrull Abdol Rahman, Mohd; Zuhaidi, Muhammad Fareez Ahmad

    2017-08-01

    Grocery retail work can be physically demanding as material handler’s tasks involve manual lifting, lowering, carrying, pushing and pulling loads. The nature of this work puts them at a risk for serious low back pain, shoulder pain and other musculoskeletal injuries. This study was conducted by using two different types of tools which were Nordic Musculoskeletal Questionnaire (NMQ) as a survey and Washington Industrial Safety and Health Act (WISHA) Checklist as a direct observation method. Among 46 males and 14 females material handlers were involved throughout this study. For NMQ, the highest body part trouble in the last 12 months was low back pain (88.3%), followed by upper back (68.3%), neck (55.3%) and shoulder (36.7%). While for WISHA Checklist, most of them experienced hazard level involving awkward posture and high hand force. From the research conducted, musculoskeletal disorders (MSDs) and ergonomic risk factors (ERFs) do related as it showed that musculoskeletal disorders may arise if the workers ignored the safety in ergonomic hazards.

  13. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  14. Short notice inspections

    International Nuclear Information System (INIS)

    Pouchkarev, V.

    1998-01-01

    For 30 years the IAEA safeguards system have evolved and have been strengthened by the regular introduction of new methods and techniques, improving both its effectiveness and efficiency. The member States of the IAEA have indicated their willingness to accept new obligations and associated technical measure that greatly strengthen the nuclear safeguards system. One element of this is the extent to which the IAEA inspectors have physical access to relevant locations for the purpose of providing independent verification of the exclusively peaceful intent of a State nuclear program. The Protocol to Safeguards granted new legal authority with respect to information on, and short notice inspector access to, all buildings on a nuclear site and administrative agreements that improve the process of designating inspectors and IAEA access to modern means of communication. This report is a short description of unannounced or short notice inspections as measures on which the new strengthened and cost efficient system will be based

  15. Inspection of disposal canisters components

    International Nuclear Information System (INIS)

    Pitkaenen, J.

    2013-12-01

    This report presents the inspection techniques of disposal canister components. Manufacturing methods and a description of the defects related to different manufacturing methods are described briefly. The defect types form a basis for the design of non-destructive testing because the defect types, which occur in the inspected components, affect to choice of inspection methods. The canister components are to nodular cast iron insert, steel lid, lid screw, metal gasket, copper tube with integrated or separate bottom, and copper lid. The inspection of copper material is challenging due to the anisotropic properties of the material and local changes in the grain size of the copper material. The cast iron insert has some acoustical material property variation (attenuation, velocity changes, scattering properties), which make the ultrasonic inspection demanding from calibration point of view. Mainly three different methods are used for inspection. Ultrasonic testing technique is used for inspection of volume, eddy current technique, for copper components only, and visual testing technique are used for inspection of the surface and near surface area

  16. MTR fuel inspection at CERCA

    International Nuclear Information System (INIS)

    Fanjas, Y.

    1992-01-01

    The stringent specifications for MTR fuel plates and fuel elements require various sophisticated inspection techniques. In particular, the development of low enriched silicide fuels made it necessary to adapt these techniques to high density plates. This paper presents the status of inspection technology at CERCA. (author)

  17. 1990 waste tank inspection program

    International Nuclear Information System (INIS)

    McNatt, F.G.

    1990-01-01

    Aqueous radioactive wastes from Savannah River Site separations processes are contained in large underground carbon steel tanks. Tank conditions are evaluated by inspection using periscopes, still photography, and video systems for visual imagery. Inspections made in 1990 are the subject of this report

  18. Computerized automated remote inspection system

    International Nuclear Information System (INIS)

    The automated inspection system utilizes a computer to control the location of the ultrasonic transducer, the actual inspection process, the display of the data, and the storage of the data on IBM magnetic tape. This automated inspection equipment provides two major advantages. First, it provides a cost savings, because of the reduced inspection time, made possible by the automation of the data acquisition, processing, and storage equipment. This reduced inspection time is also made possible by a computerized data evaluation aid which speeds data interpretation. In addition, the computer control of the transducer location drive allows the exact duplication of a previously located position or flaw. The second major advantage is that the use of automated inspection equipment also allows a higher-quality inspection, because of the automated data acquisition, processing, and storage. This storage of data, in accurate digital form on IBM magnetic tape, for example, facilitates retrieval for comparison with previous inspection data. The equipment provides a multiplicity of scan data which will provide statistical information on any questionable volume or flaw. An automatic alarm for location of all reportable flaws reduces the probability of operator error. This system has the ability to present data on a cathode ray tube as numerical information, a three-dimensional picture, or ''hard-copy'' sheet. One important advantage of this system is the ability to store large amounts of data in compact magnetic tape reels

  19. Prevalence of intestinal parasites, salmonella and shigella among apparently health food handlers of Addis Ababa University student's cafeteria, Addis Ababa, Ethiopia.

    Science.gov (United States)

    Aklilu, Addis; Kahase, Daniel; Dessalegn, Mekonnen; Tarekegn, Negatu; Gebremichael, Saba; Zenebe, Seyfe; Desta, Kassu; Mulugeta, Gebru; Mamuye, Yeshiwodim; Mama, Mohammedaman

    2015-01-24

    Food contamination may occur at any point during its journey through production, processing, distribution, and preparation. The risk of food getting contaminated depends largely on the health status of the food handlers, their personal hygiene, knowledge and practice of food hygiene. Food borne diseases are a public health problem in developed and developing countries like Ethiopia. A cross sectional study was conducted among food handlers in Addis Ababa student's cafeteria from January to May 2013. Structured questionnaire was used to collect socio demographic data and associated risk factors. Stool specimens were examined for bacteria and intestinal parasites following standard procedures. Biochemical tests were done to identify the species of bacterial isolates. Sensitivity testing was done using Kirby- Baur disk diffusion method. A total of 172 food handlers were enrolled in the study. The majority of study participants were females 134 (77.9%). About 78 (45.3%) of food handlers were found to be positive for different intestinal parasites with the most abundant parasite of Entameoba histolytica/dispar 68 (70.8%) followed by Giardia lamblia 18 (18.8%), Taenia species 5 (5.2%), Ascaris lumbricoides 2 (2.1%), hookworm 2 (2.1%) and Trichuris trichiura 1 (1.1%). Stool cultures revealed 3.5% of Salmonella isolates (Sero-grouping on Salmonella isolate was not done), while Shigella species was not isolated from any of the stool samples obtained from Food handlers. All isolates of Salmonella were sensitive to ciprofloxacin, amikacin and gentamicin but resistant to ampicillin, clindamycin, and erythromycin. The present study revealed a high prevalence of intestinal parasite in asymptomatic (apparently health) food handlers. Such infected food handlers can contaminate food, drinks and could serve as source of infection to consumers via food chain.

  20. Effectiveness of an intervention package on knowledge, attitude, and practices of food handlers in a tertiary care hospital of north India: A before and after comparison study.

    Science.gov (United States)

    Dudeja, Puja; Singh, Amarjeet; Sahni, Nancy; Kaur, Sukhpal; Goel, Sonu

    2017-01-01

    Food-borne illnesses have been a recognized hazard for decades. Recent promulgation of Food Safety and Standards Act (FSSA), 2006, indicates the concern of our Govt. for food safety. Research on effectiveness of food safety interventions in our country is remarkably scarce. Hence, the present study was conducted in a tertiary care hospital of north India to create evidence-based results for food safety interventions. The study was before and after intervention trial which was registered with CTRI. Data collection was paperless using a software. All food handlers ( n  = 280) working inside the hospital were recruited. Intervention package comprised Self-Instructional Manual in Hindi for food handlers, short film for sensitization of food handlers on food safety titled 'Gravy Extra', and a documentary titled 'Food Safety from farm to Fork'. Chi square test, paired t test, and Wilcoxon sign rank test were used. The mean age of food handlers was 35 ± 2 years. Majority (61.7%) of food handlers were educated less than 10th standard. Nearly 60% of them had up to five years of experience. At base line majority (68.9%) had a fair knowledge about food safety issues. There was a significant improvement in food safety knowledge and practice score of food handlers after the intervention ( p  < 0.05). Their attitude toward food safety changed in a positive direction ( p  < 0.05). The intervention package was useful in improving the knowledge, creating a positive attitude and enhancing the food safety practices of food handlers working inside a tertiary care hospital.

  1. Technology Assessment of the Inspection Readiness Plan in Chemical Weapons Convention Challenge Inspections

    National Research Council Canada - National Science Library

    Woodley, Anthony

    1998-01-01

    ...) Challenge Inspections. The CWC is an intrusive inspection. The Challenge Inspection allows for a team of international inspectors to inspect on very short notice a naval facility suspected of violating the CWC...

  2. Process Improvement to the Inspection Readiness Plan in Chemical Weapons Convention Challenge Inspections

    National Research Council Canada - National Science Library

    Triplett, William

    1997-01-01

    ...) Challenge Inspection. The CWC is an intensive inspection. The Challenge Inspection allows for a team of international inspectors to inspect a naval facility suspected of violating the CWC on very short notice...

  3. International cooperation in production inspections

    International Nuclear Information System (INIS)

    Limousin, S.

    2009-01-01

    Nuclear pressure equipment, like the reactor pressure vessel or steam generators, are manufactured in many countries all around the world. As only few reactors were built in the 90's, most of the nuclear safety authorities have lost part of their know how in component manufacturing oversight. For these two reasons, vendor inspection is a key area for international cooperation. On the one hand, ASN has bilateral relationships with several countries (USA, Finland, China...) to fulfill specific purposes. On the other hand, ASN participates in international groups like the MDEP ( Multinational Design Evaluation Program). A MDEP working group dedicated to vendor inspection cooperation enables exchanges of informations (inspection program plan, inspection findings...) among the regulators. Join inspections are organized. International cooperation could lead in the long term to an harmonization of regulatory practices. (author)

  4. Results of calendar year 1994 monitor well inspection and maintenance program, Y-12 Plant, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    McMaster, B.W.; Jones, S.B.; Sitzler, J.L.

    1995-06-01

    This document is a compendium of results of the calendar year 1994 Monitor Well Inspection and Maintenance Program at the Department of Energy Y-12 Plant in Oak Ridge, Tennessee. This report documents the work relating to well inspections and maintenance requests. Inspections are implemented in order to better assess the condition and maintenance needs of wells that are actively being monitored. Currently this approach calls for inspecting all wells on a routine (annual or triennial) basis which are: (1) in an active sampling program; (2) included in a hydrologic study; or (3) not in service, but not scheduled for plugging and abandonment. Routine inspections help to ensure that representative groundwater samples and hydrologic data are being collected, and contribute to the life expectancy of each well. This report formally presents well inspection and maintenance activities that were conducted at the Y-12 Plant during 1994. All inspections were conducted between April and December

  5. Results of calendar year 1994 monitor well inspection and maintenance program, Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    McMaster, B.W. [Univ. of Tennessee, Knoxville, TN (United States); Jones, S.B.; Sitzler, J.L. [Oak Ridge National Lab., TN (United States)

    1995-06-01

    This document is a compendium of results of the calendar year 1994 Monitor Well Inspection and Maintenance Program at the Department of Energy Y-12 Plant in Oak Ridge, Tennessee. This report documents the work relating to well inspections and maintenance requests. Inspections are implemented in order to better assess the condition and maintenance needs of wells that are actively being monitored. Currently this approach calls for inspecting all wells on a routine (annual or triennial) basis which are: (1) in an active sampling program; (2) included in a hydrologic study; or (3) not in service, but not scheduled for plugging and abandonment. Routine inspections help to ensure that representative groundwater samples and hydrologic data are being collected, and contribute to the life expectancy of each well. This report formally presents well inspection and maintenance activities that were conducted at the Y-12 Plant during 1994. All inspections were conducted between April and December.

  6. Detailed simulation of ultrasonic inspections

    International Nuclear Information System (INIS)

    Chaplin, K.R.; Douglas, S.R.; Dunford, D.

    1997-01-01

    Simulation of ultrasonic inspection of engineering components have been performed at the Chalk River Laboratories of AECL for over 10 years. The computer model, called EWE for Elastic Wave Equations, solves the Elastic Wave Equations using a novel finite difference scheme. It simulates the propagation of an ultrasonic wave from the transducer to a flaw, the scatter of waves from the flaw, and measurement of signals at a receive transducer. Regions of different materials, water and steel for example, can be simulated. In addition, regions with slightly different material properties from the parent material can be investigated. The two major types of output are displays of the ultrasonic waves inside the component and the corresponding A-scans. EPRI and other organizations have used ultrasonic models for: defining acceptable ultrasonic inspection procedures, designing and evaluating inspection techniques, and for quantifying inspection reliability. The EWE model has been applied to the inspection of large pipes in a nuclear plant, gas pipeline welds and steam generator tubes. Most recent work has dealt with the ultrasonic inspection of pressure tubes in CANDU reactors. Pressure tube inspections can reliably detect and size defects; however, there are improvements that can be made. For example, knowing the sharpness of a flaw-tip is crucial for fitness for service assessments. Computer modelling of the ultrasonic inspection of flaws with different root radius has suggested inspection techniques that provide flaw tip radius information. A preliminary investigation of these methods has been made in the laboratory. The basis for the model will be reviewed at the presentation. Then the results of computer simulations will be displayed on a PC using an interactive program that analyzes simulated A-scans. This software tool gives inspection staff direct access to the results of computer simulations. (author)

  7. AMIRA international annual report 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    AMIRA International Limited is an independent association of companies to promote research in fields of interests to the mineral, coal and petroleum industries and provides its services to members in many parts of the world. The annual report contains the chairman's report, chief executive's report, details of operations, members and research; a summary of research programmes in the following areas: multi-disciplinary, geoscience, mine engineering, mineral processing, extractive metallurgy and sustainability. It contains a concise financial report for the year ended 30 June 2006. Details of projects in each area are given. Topics include: mineral flotation, hoist rope inspection and 3D imaging for underground mining.

  8. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2009

    International Nuclear Information System (INIS)

    2010-01-01

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Unit (CAU) sites located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2009 and includes inspection and repair activities completed at the following seven CAUs: (1) CAU 400: Bomblet Pit and Five Points Landfill (TTR); (2) CAU 407: Roller Coaster RadSafe Area (TTR); (3) CAU 424: Area 3 Landfill Complexes (TTR); (4) CAU 426: Cactus Spring Waste Trenches (TTR); (5) CAU 453: Area 9 UXO Landfill (TTR); (6) CAU 484: Surface Debris, Waste Sites, and Burn Area (TTR); and (7) CAU 487: Thunderwell Site (TTR). The annual post-closure inspections were conducted May 5-6, 2009. All inspections were conducted according to the post-closure plans in the approved Closure Reports. The post-closure inspection plan for each CAU is included in Attachment B, with the exception of CAU 400. CAU 400 does not require post-closure inspections, but inspections of the vegetation and fencing are conducted as a best management practice. The inspection checklists for each site inspection are included in Attachment C, the field notes are included in Attachment D, and the site photographs are included in Attachment E. Vegetation monitoring of CAU 400, CAU 404, CAU 407, and CAU 426 was performed in June 2009, and the vegetation monitoring report is included in Attachment F. Maintenance was performed at CAU 453. Animal burrows observed during the annual inspection were backfilled, and a depression was restored to grade on June 25, 2009. Post-closure site inspections should continue as scheduled. Vegetation survey inspections have been conducted annually at CAUs 400, 404, 407, and 426. Discontinuation of vegetation surveys is recommended at the CAU 400 Bomblet Pit and CAU 426, which have been successfully revegetated. Discontinuation of vegetation surveys is also recommended at CAU 404, which has been changed to an administrative closure with no inspections

  9. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2009

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2010-05-28

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Unit (CAU) sites located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2009 and includes inspection and repair activities completed at the following seven CAUs: · CAU 400: Bomblet Pit and Five Points Landfill (TTR) · CAU 407: Roller Coaster RadSafe Area (TTR) · CAU 424: Area 3 Landfill Complexes (TTR) · CAU 426: Cactus Spring Waste Trenches (TTR) · CAU 453: Area 9 UXO Landfill (TTR) · CAU 484: Surface Debris, Waste Sites, and Burn Area (TTR) · CAU 487: Thunderwell Site (TTR) The annual post-closure inspections were conducted May 5–6, 2009. All inspections were conducted according to the post-closure plans in the approved Closure Reports. The post-closure inspection plan for each CAU is included in Attachment B, with the exception of CAU 400. CAU 400 does not require post-closure inspections, but inspections of the vegetation and fencing are conducted as a best management practice. The inspection checklists for each site inspection are included in Attachment C, the field notes are included in Attachment D, and the site photographs are included in Attachment E. Vegetation monitoring of CAU 400, CAU 404, CAU 407, and CAU 426 was performed in June 2009, and the vegetation monitoring report is included in Attachment F. Maintenance was performed at CAU 453. Animal burrows observed during the annual inspection were backfilled, and a depression was restored to grade on June 25, 2009. Post-closure site inspections should continue as scheduled. Vegetation survey inspections have been conducted annually at CAUs 400, 404, 407, and 426. Discontinuation of vegetation surveys is recommended at the CAU 400 Bomblet Pit and CAU 426, which have been successfully revegetated. Discontinuation of vegetation surveys is also recommended at CAU 404, which has been changed to an administrative closure with no inspections required. Vegetation

  10. Annual Report 2007. Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    2008-01-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across tree parts and seven annexes the activities developed by the organism during 2007. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the occupational surveillance; the environmental monitoring; improved organizational. Also, this publication have annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

  11. Annual Report 2009. Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    2010-01-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across four parts and seven annexes the activities developed by the organism during 2009. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the environmental monitoring; the occupational surveillance; the training and the public information; improved organizational and budgetary developments. Also, this publication have annexes with the following content: regulatory documents; inspections to medical, industrial and training installations; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

  12. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-02-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from October 1990 through December 1990

  13. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1993-05-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from January 1993 through March 1993

  14. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-05-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from January 1991 through March 1991

  15. Licensee contractor and Vendor Inspection status report

    International Nuclear Information System (INIS)

    1993-01-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from October 1992 through December 1992

  16. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1989-12-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from July 1989 through September 1989

  17. Lean Construction Applications for Bridge Inspection

    Science.gov (United States)

    2017-10-01

    Lean philosophy was used to analyze the efficiency of bridge inspection. Emphasis was put on identifying activities that add value to the final output, an owner approved bridge inspection report. 26 bridge inspections were shadowed. Time spent on bri...

  18. Licensee Contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1992-01-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from October through December 1991

  19. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1993-08-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from April through June 1993

  20. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-09-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from April 1991 through June 1991

  1. Automated visual inspection of moving custom parts

    CSIR Research Space (South Africa)

    Davrajh, S

    2008-01-01

    Full Text Available frequencies than batched produced parts. This higher frequency of inspection significantly impacts inspection times, and inherently, production rates. An effective, diverse, accurate, robust, and time efficient method for inspecting custom parts is therefore...

  2. Licensee contractor and Vendor Inspection status report

    International Nuclear Information System (INIS)

    1992-05-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from January through March 1992

  3. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-07-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from January 1990 through March 1990

  4. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-01-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from October 1989 through December 1989

  5. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1992-11-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from July 1992 through September 1992

  6. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-10-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from July 1991 through September 1991

  7. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-11-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from April 1990 through June 1990

  8. Prototype Systems for Measuring Outdoor Air Intake Rates in Rooftop Air Handlers

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Wanyu R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    The widespread absence of systems for real-time measurement and feedback control, of minimum outdoor air intake rates in HVAC systems contributes to the poor control of ventilation rates in commercial buildings. Ventilation rates affect building energy consumption and influence occupant health. The project designed fabricated and tested four prototypes of systems for measuring rates of outdoor air intake into roof top air handlers. All prototypes met the ±20% accuracy target at low wind speeds, with all prototypes accurate within approximately ±10% after application of calibration equations. One prototype met the accuracy target without a calibration. With two of four prototype measurement systems, there was no evidence that wind speed or direction affected accuracy; however, winds speeds were generally below usually 3.5 m s-1 (12.6 km h-1) and further testing is desirable. The airflow resistance of the prototypes was generally less than 35 Pa at maximum RTU air flow rates. A pressure drop of this magnitude will increase fan energy consumption by approximately 4%. The project did not have resources necessary to estimate costs of mass produced systems. The retail cost of components and materials used to construct prototypes ranged from approximately $1,200 to $1,700. The test data indicate that the basic designs developed in this project, particularly the designs of two of the prototypes, have considerable merit. Further design refinement, testing, and cost analysis would be necessary to fully assess commercial potential. The designs and test results will be communicated to the HVAC manufacturing community.

  9. Job satisfaction among aircraft baggage handlers and their exposure to risk factors for work-related musculoskeletal disorders: A case study.

    Science.gov (United States)

    Bulduk, Sıdıka; Bulduk, Emre Özgür; Güler, Alpaslan

    2017-01-01

    Work-related musculoskeletal disorders (WMSDs) cause pain and economic loss. Risk of WMSDs is affected by job satisfaction as a psychosocial factor. The aim of this study was to investigate job satisfaction among aircraft baggage handlers and their exposure to work-related musculoskeletal disorder risk factors. Two data collection tools addressing risk levels (Quick Exposure Check) and psychosocial factors (Job Satisfaction Survey) were answered by 399 male baggage handlers employed in Esenboga International Airport in Ankara, Turkey. Risk exposure scores for WMSDs among baggage handlers were 27±3.4 (high) for the back (static), 42±7.2 (very high) for the back (moving), 42±6.1 (very high) for the shoulder/arm, 44±1.9 (very high) for the wrist/hand, and 13±5.1(high) for the neck. The average job satisfaction levels of the majority was either low (4.2250±1.10184) or moderate (3.1019±0.93352). In addition, low and moderate job satisfaction was significantly associated with higher WMSD risk levels among baggage handlers. Increased WMSD risk levels among baggage handlers are associated with low and moderate job satisfaction, suggesting that it is mandatory to perform intervention methods in this occupation.

  10. Fully Employing Software Inspections Data

    Science.gov (United States)

    Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

    2009-01-01

    Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

  11. Advanced ultrasonic inspections

    International Nuclear Information System (INIS)

    Ghia, S.

    1990-08-01

    Acoustic Emission (AE) continuous monitoring and periodical inspections by advanced ultrasonic have been applied to evaluate defect evolution within a PWR reduced scale (1:5) pressure vessel subjected to cyclic mechanical fatigue test. This experimental activity has been carried out in the frame of the Primary Circuit Component Life Prediction programme. In the time period covered by this report actions were performed as following: (1) Ultrasonic examination by multifrequency acoustic holography to evaluate defect evolution subsequently repair and heat treatment of the R2 vessel carried out in March 1988. For the purpose, measurements were performed both at 0 and 200 bar of internal pressure. As uniformity of the procedures adopted, for calibration and testing, made the results comparable with the previous ones no evidence for significant growing of the examined defects has been found. (2) Acoustic emission monitoring has then been carried out during fatigue test from 416000 to 565000 fatigue cycles. Analysis of a large amount of data has been performed paying particular attention to the distinction between friction phenomena and crack growth in order to obtain a correct diagnosis of flaw evolution. The signal duration distribution and the correlation of AE appearance time versus load cycle phase were considered to characterise stick-slip processes. A general intensification of AE activity has been recorded during this last period of monitoring and previous known AE sources were confirmed together with the appearance of new AE sources some of them correlable with real defects

  12. From PISC to risk informed inspection

    International Nuclear Information System (INIS)

    Crutzen, S.; Lemaitre, P.; Fabbri, L.

    1998-01-01

    In this paper the correlation between inspection effectiveness, inspection qualification and risk informed inspection will be treated in view of harmonisation of inspection of nuclear plant components. Through the different phases of the PISC programme the necessity has been demonstrated to show the effectiveness of the inspection through a formal process of qualification in order to ensure that a certain level of effectiveness has been reached. Inspection qualification is indeed the way to quantify the capability level of inspection techniques used. The targets to be met by the inspection is information which should be obtained from risk based analyses. (author)

  13. Plant inspection and maintenance technology

    International Nuclear Information System (INIS)

    Miyahara, Masatoshi; Kanazawa, Masafumi

    1995-01-01

    The article reports on information systems and related tools that support routine inspection and preventive maintenance activities, which contribute to safer plant operation and increase plant operating duty. Tools include the Mitsubishi Electric Reliability and Availability Upgrade Program-Nuclear (MELRAP-N), which supports the general evolution of industry operating experiences, periodic component replacement management, management of discontinued and modified components, periodic inspection item management, and periodic inspection workplace management. The article also introduces a comprehensive preventive maintenance management system currently under development. (author)

  14. Non-destructive inservice inspections

    International Nuclear Information System (INIS)

    Kauppinen, P.; Sarkimo, M.; Lahdenperae, K.

    1998-01-01

    In order to assess the possible damages occurring in the components and structures of operating nuclear power plants during service the main components and structures are periodically inspected by non-destructive testing techniques. The reliability of non-destructive testing techniques applied in these inservice inspections is of major importance because the decisions concerning the needs for repair of components are mainly based on the results of inspections. One of the targets of this research program has been to improve the reliability of non-destructive testing. This has been addressed in the sub-projects which are briefly summarised here. (author)

  15. Unified Tanker Survey and Inspection Regime in Terms of Reducing Psychophysical Strain of the Crew

    Directory of Open Access Journals (Sweden)

    Toni Bielić

    2017-09-01

    Full Text Available The paper focuses on analysis of the effect of various surveys and inspections on the psychophysical behaviour of the crew. After analysing the scope and the extent of each regime, the authors identified more than 60% of surveys overlapping each other. Furthermore, the results of the survey conducted among seafarers indicate that the present method of carrying out ship surveys and inspections have a negative effect on the psychophysical condition of the crew. Therefore, a new method of tanker inspections has been proposed in order to reduce the psychophysical strain of the crew. The proposed method would minimise the annual duration of the inspections up to 30% and improve inspection time coordination without compromising quality and safety of the ships.

  16. Safety of patient meals in 2 hospitals in Alexandria, Egypt before and after training of food handlers.

    Science.gov (United States)

    El Derea, H; Salem, E; Fawzi, M; Abdel Azeem, M

    2008-01-01

    We assessed the food safety knowledge and food handling practices of 23 food handlers in 2 hospitals in Alexandria, Egypt [Gamal Abdel Nasser (GAN) and Medical Research Institute (MRI)] before and after a food safety training programme, and also the bacteriological quality of patient meals and kitchen equipment. There was a significant improvement in all knowledge-associated parameters except for personal hygiene in GAN. There was an improvement in the food safety practices in both hospitals. The bacteriological quality of most patient meals and food preparation surfaces and utensils improved after training. The bacteriological quality of patients' meals served in GAN was generally better than that in MRI.

  17. NERSC 2001 Annual Report; ANNUAL

    International Nuclear Information System (INIS)

    Hules, John

    2001-01-01

    The National Energy Research Scientific Computing Center (NERSC) is the primary computational resource for scientific research funded by the DOE Office of Science. The Annual Report for FY2001 includes a summary of recent computational science conducted on NERSC systems (with abstracts of significant and representative projects); information about NERSC's current systems and services; descriptions of Berkeley Lab's current research and development projects in applied mathematics, computer science, and computational science; and a brief summary of NERSC's Strategic Plan for 2002-2005

  18. Multifamily Housing Physical Inspection Scores

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Real Estate Assessment Center conducts physical property inspections of properties that are owned, insured or subsidized by HUD, including public housing and...

  19. Incore inspection and repairing device

    International Nuclear Information System (INIS)

    Ito, Arata; Kimura, Motohiko

    1998-01-01

    The present invention provides a device for inspecting and repairing the inside of a reactor container even if it is narrow, with no trouble by using a swimming-type operation robot. Namely, the device of the present invention conducts inspection and repairing operations for the inside of the reactor by introducing a swimming type operation robot into the reactor container. The swimming-type operation robot comprises a robot main body having a propeller, a balancer operably disposed to the robot main body and an inspection and repairing unit attached detachable to the balancer. In the device of the present invention, since the inspection and preparing unit is attached detachably to the swimming robot, a robot which transports tools is formed as a standard product. As a result, the production cost can be reduced, and the reliability of products can be improved. Appropriate operations can be conducted by using best tools. (I.S.)

  20. In-service inspection techniques

    International Nuclear Information System (INIS)

    Backfisch, W.; Zipser, R.R.

    1980-01-01

    The owner of a nuclear power plant (NPP) is obligated and interested to maintain - by regular maintenance and in-service inspections - the operational safety and availability of the plant for the subsequent operating period in a condition, as is specified as the basis of the erection and the last operational permits. In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. Below, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor or on a boiling-water reactor) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

  1. Knowledge-Based Inspection Capabilities

    National Research Council Canada - National Science Library

    Marrano, Lance R; Grussing, Michael N

    2006-01-01

    ... does not present a compelling safety hazard. Abandoning certain inspection programs to reduce costs is not a viable alternative, however, because that could degrade real property investments, soldier quality of life, and mission-readiness...

  2. Construction inspection manual of procedures

    Science.gov (United States)

    2009-01-01

    This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...

  3. National Automated Conformity Inspection Process -

    Data.gov (United States)

    Department of Transportation — The National Automated Conformity Inspection Process (NACIP) Application is intended to expedite the workflow process as it pertains to the FAA Form 81 0-10 Request...

  4. Public Housing Physical Inspection Scores

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Real Estate Assessment Center conducts physical property inspections of properties that are owned, insured or subsidized by HUD, including public housing and...

  5. Ultrasonic inspection of austenitic welds

    Energy Technology Data Exchange (ETDEWEB)

    Tomlinson, J R; Wagg, A R; Whittle, M J [N.D.T. Applications Centre, CEGB, Manchester (United Kingdom)

    1980-11-01

    The metallurgical structure of austenitic welds is described and contrasted with that found in ferritic welds. It is shown that this structure imparts a marked elastic anisotropy in the ultrasonic propagation parameters. Measurements of variations in the apparent attenuation of sound and deviations in the beam direction are described. The measurements are interpreted in terms of the measured velocity anisotropy. Two applications of the fundamental work are described. In the first it is shown how, by using short pulse compression wave probes, and with major modification of the welding procedure, a stainless steel fillet weld in an AGR boiler can be inspected. In the second application, alternative designs of a transition butt weld have been compared for ease of ultrasonic inspection. The effects of two different welding processes on such an inspection are described. Finally, the paper examines the prospects for future development of inspection and defect-sizing techniques for austenitic welds. (author)

  6. Sea bed mapping and inspection

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The conference has 24 presentations on the topics: Sea bed mapping, inspection, positioning, hydrography, marine archaeology, remote operation vehicles and computerized simulation technologies, oil field activities and plans, technological experiences and problems. (tk)

  7. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2014

    Energy Technology Data Exchange (ETDEWEB)

    Silvas, A. J. [National Security Technologies, LLC, Las Vegas, NV (United States). Nevada Test Site; Lantow, Tiffany A. [National Security Technologies, LLC, Las Vegas, NV (United States). Nevada Test Site

    2015-03-25

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2014 and includes inspection and repair activities completed at the following CAUs; CAU 400: Bomblet Pit and Five Points Landfill (TTR); CAU 407: Roller Coaster RadSafe Area (TTR); CAU 424: Area 3 Landfill Complexes (TTR); CAU 453: Area 9 UXO Landfill (TTR); and CAU 487: Thunderwell Site (TTR) Inspections were conducted according to the post-closure plans in the approved Closure Reports and subsequent correspondence with the Nevada Division of Environmental Protection. The post-closure inspection plans and subsequent correspondence modifying the requirements for each CAU are included in Appendix B. The inspection checklists are included in Appendix C. Photographs taken during inspections are included in Appendix D. The annual post-closure inspections were conducted on May 28, 2014. Maintenance was required at CAU 407. Animal burrows were backfilled and erosion repairs were performed. Vegetation monitoring was performed at CAU 407 in June 2014. The vegetation monitoring report is included in Appendix E.

  8. Gravity Probe B Inspection

    Science.gov (United States)

    2000-01-01

    The space vehicle Gravity Probe B (GP-B) is the relativity experiment developed at Stanford University to test two extraordinary predictions of Albert Einstein's general theory of relativity. The experiment will measure, very precisely, the expected tiny changes in the direction of the spin axes of four gyroscopes contained in an Earth-orbiting satellite at a 400-mile altitude. So free are the gyroscopes from disturbance that they will provide an almost perfect space-time reference system. They will measure how space and time are very slightly warped by the presence of the Earth, and, more profoundly, how the Earth's rotation very slightly drags space-time around with it. These effects, though small for the Earth, have far-reaching implications for the nature of matter and the structure of the Universe. GP-B is among the most thoroughly researched programs ever undertaken by NASA. This is the story of a scientific quest in which physicists and engineers have collaborated closely over many years. Inspired by their quest, they have invented a whole range of technologies that are already enlivening other branches of science and engineering. In this photograph, engineer Gary Reynolds is inspecting the inside of the probe neck during probe thermal repairs. GP-B is scheduled for launch in April 2004 and managed for NASA by the Marshall Space Flight Center. Development of the GP-B is the responsibility of Stanford University along with major subcontractor Lockheed Martin Corporation. (Image credit to Russ Leese, Gravity Probe B, Stanford University)

  9. Dentistry and food safety – the oral health of food handlers at a public hospital in the city of Belém, Pará

    Directory of Open Access Journals (Sweden)

    Elaine Beatriz Teixeira Ramalho

    2008-01-01

    Full Text Available Objective: This research evaluated the oral health of 40 food handlers in the Nutrition and Diet Unit of a public hospital in Belém-Pará. Methods: Interview and intra-oral examination of the subjects.Results: The results showed a high prevalence of tooth decay and periodontal disease, in addition to a low level of education and motivation as regards oral health care in the studied sample.Conclusion: The authors concluded that oral health care and education should be included in publications for and training of food handlers,since oral health promotion would benefit these workers directly, by increasing their quality of life, and indirectly benefit the entirecommunity that consumes the food prepared by them. The results and conclusions of this work should encourage the development of oralhealth care promotion programmers as regards this particular group of employees, the food handlers.

  10. [Experience with knowledge development in food handlers with te implementation of Hazard Analysis Critical control points (HACCP) in a hospital food service].

    Science.gov (United States)

    de Sousa, A A; de Salles, R K; Felipe, M R; Tosin, I

    1999-03-01

    The present article has as objective to describe the methodology of an experience of implantation of Hazard Analyses Critical Control Points (HACCP) with food handlers in a hospital food service establishment, inside of a conception of relationship and construction of knowledge. Meetings with the food handlers and nutritionists, with the objective of raising the difficulties poined for the sector and the work to be developed. The HACCP consisted of the evaluation of the operations, following the sequential steps recommended, looking itself to instruct the food handlers on the methods of the operations and its interpretations. The detected critical points, the measures of control, the criteria of correction and the monitoring have widely been argued, serving as didactic elements for the reconstruction of quality of the preparations. The discussions generated actions that were developed in short term, revealing the need of a more effective and continuous partnership for the new proposals.

  11. Nuclear reactor vessel inspection apparatus

    International Nuclear Information System (INIS)

    Blackstone, E.G.; Lofy, R.A.; Williams, L.P.

    1979-01-01

    Apparatus for the in situ inspection of a nuclear reactor vessel to detect the location and character of flaws in the walls of the vessel, in the welds joining the various sections of the vessel, in the welds joining attachments such as nozzles, elbows and the like to the reactor vessel and in such attachments wherein an inspection head carrying one or more ultrasonic transducers follows predetermined paths in scanning the various reactor sections, welds and attachments

  12. Austenitic stainless steel weld inspection

    International Nuclear Information System (INIS)

    Mech, S.J.; Emmons, J.S.; Michaels, T.E.

    1978-01-01

    Analytical techniques applied to ultrasonic waveforms obtained from inspection of austenitic stainless steel welds are described. Experimental results obtained from a variety of geometric and defect reflectors are presented. Specifically, frequency analyses parameters, such as simple moments of the power spectrum, cross-correlation techniques, and adaptive learning network analysis, all represent improvements over conventional time domain analysis of ultrasonic waveforms. Results for each of these methods are presented, and the overall inspection difficulties of austenitic stainless steel welds are discussed

  13. Automated visual inspection of textile

    DEFF Research Database (Denmark)

    Jensen, Rune Fisker; Carstensen, Jens Michael

    1997-01-01

    A method for automated inspection of two types of textile is presented. The goal of the inspection is to determine defects in the textile. A prototype is constructed for simulating the textile production line. At the prototype the images of the textile are acquired by a high speed line scan camera...... the protype to a production line system we only need to gain a speed factor of 4....

  14. Ultrasonic inspection of inpile tubes

    International Nuclear Information System (INIS)

    Boyd, D.M.; Bossi, H.

    1985-01-01

    The in-service inspection (ISI) of inpile tubes can be performed accurately and safely with a semiautomatic ultrasonic inspection system. The ultrasonic technique uses a set of multiple transducers to detect and size cracks, voids, and laminations radially and circumferentially. Welds are also inspected for defects. The system is designed to inspect stainless steel and Inconel tubes ranging from 53.8 mm (2.12 in.) to 101.6 mm (4 in.) inner diameter with wall thickness on the order of 5 mm. The inspection head contains seven transducers mounted in a surface-following device. Six angle-beam transducers generate shear waves in the tubes. Two of the six are oriented to detect circumferential cracks, and two detect axial cracks. Although each of these four transducers is used in the pulse-echo mode, they are oriented in aligned sets so pitch-catch operation is possible if desired. The remaining angle-beam transducers are angulated to detect flaws that are off axial or circumferential orientation. The seventh transducer is used for longitudinal inspection and detects and sizes laminar-type defects

  15. 1998 Annual report; 1998 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This annual report presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1998. The activities are developed in 11 chapters and 2 appendixes, where are describing the activities and the bases of the Argentine Regulatory System. The following chapters and the appendixes are: 1.-Evolution of the nuclear regulatory activities in the Argentina. 2.-Regulatory system, laws, transport of radioactive materials, safety at the management of radioactive wastes, regulatory documents issued. 3.-Institutional relations with national and international organizations. 4.-Inspections and evaluations of the radiological and nuclear safety. 5.-Inspections and evaluations of safeguards and physical protection. 6.-Occupational surveillance. 7.-Environmental surveillance. 8.-Radiological emergencies. 9.-Scientific and technological activities. 10.-Training and technical information. 11.-Human and economic resources. Appendix 1.-Documents and regulatory licensings. Appendix 2.-Inspections to radioactive facilities.

  16. Bacterial contamination of the hands of food handlers as indicator of hand washing efficacy in some convenient food industries in South Africa.

    Science.gov (United States)

    Aa, Lambrechts; Is, Human; Jh, Doughari; Jfr, Lues

    2014-07-01

    Hands of ready-to-eat food service employees have been shown to be vectors in the spread of foodborne disease, mainly because of poor personal hygiene and accounting for approximately 97% of food borne illnesses in food service establishments and homes. Our objective was to evaluate the efficacy of hand washing practices and sanitation before commencing work among food handlers in the convenient food industry in Gauteng, South Africa. A total of 230 samples were collected, involving 100% of the food handlers, in 8 selected convenient food outlets with their main focus on preparing ready-to-eat foods. The workers' cleaned and disinfected dominant hands were sampled for Total Plate Count (TPC), Staphylococcus aureus and Escherichia coli. Bacteria were isolated and counted using standard methods. The highest bacterial count from the hand samples was 7.4 x 10(3) cfu.cm(-2) and the lowest showed no detectable growth. Although hands with a count of 0 cfu.cm(-2) were found in all of the plants, the results indicated that all the plants exceeded the legal limit for food surfaces or hands of food handlers had no bacteria detectable on their hands. One sample tested positive for E. coli and S. aureus could not be detected on the hands of any of the food handlers. The study revealed that hand hygiene is unsatisfactory and may have serious implications for public health due to contamination of food from food handlers' hands. This therefore underlined the importance of further training to improve food handlers' knowledge of good hand washing practices.

  17. Knowledge, risk perception and mitigation measures towards Ebola virus disease by potentially exposed bushmeat handlers in north-central Nigeria: Any critical gap?

    Science.gov (United States)

    Alhaji, N B; Yatswako, S; Oddoh, E Y

    2018-02-01

    The bushmeat industry has been a topic of increasing importance among public health officials for its influence on zoonotic diseases transmission, such as Ebola virus disease (EVD), a rare and severe infectious disease of humans and non-human primates. This survey assessed knowledge/awareness, risk perceptions and mitigation practices towards EVD among bushmeat handlers in north-central Nigeria. These characteristics are premise to level of preparedness against appropriate risk prevention and control. A questionnaire-based cross-sectional study was conducted between January and December 2015 on 395 bushmeat handlers. Descriptive and analytical statistical analyses were performed using Epi-Info 3.5.3 software, and p knowledge than the hunters. Handlers with tertiary education were more likely (OR 3.22; 95% CI: 1.56-6.67) to possess significant satisfactory knowledge/awareness about EVD. Also, vendors were more likely (OR 1.85; 95% CI: 1.01-3.42) to practice satisfactory mitigation measures than the hunters. Only handlers with tertiary education were more likely (OR 2.48; 95% CI: 1.26-4.89) to significantly practice satisfactory mitigation measures against EVD. Although most of the handlers possessed significant knowledge/awareness about EVD, few applied mitigation measures against its infection, which is the challenging gap. There is a need for collaborations between the public health, veterinary and wildlife authorities in the provision of health information to bushmeat handlers on better management of emerging and re-emerging zoonotic viral diseases of wildlife origin. © 2017 Blackwell Verlag GmbH.

  18. Task of radiation hygiene inspection at NPPs

    International Nuclear Information System (INIS)

    Shevts, J.; Kunz, Eh.

    1983-01-01

    The task and functions of the radiation-hygiene inspection in Czechoslovakia are presented. The radiation safety related information amounts that are to be presented to the hygiene inspection institutions are determined. The hygiene inspection content and forms at the stages of NPP designing, construction and operation are discussed. The hygiene inspection place is determined within the general radiation safety system [ru

  19. Automated ultrasonic inspection of nuclear plant components

    International Nuclear Information System (INIS)

    Baron, J.A.; Dolbey, M.P.

    1982-01-01

    For reasons of safety and efficiency, automated systems are used in performing ultrasonic inspection of nuclear components. An automated system designed specifically for the inspection of headers in a nuclear plant is described. In-service inspection results obtained with this system are shown to correlate with pre-service inspection results obtained by manual methods

  20. ROBOTIC TANK INSPECTION END EFFECTOR

    International Nuclear Information System (INIS)

    Rachel Landry

    1999-01-01

    The objective of this contract between Oceaneering Space Systems (OSS) and the Department of Energy (DOE) was to provide a tool for the DOE to inspect the inside tank walls of underground radioactive waste storage tanks in their tank farms. Some of these tanks are suspected to have leaks, but the harsh nature of the environment within the tanks precludes human inspection of tank walls. As a result of these conditions only a few inspection methods can fulfill this task. Of the methods available, OSS chose to pursue Alternating Current Field Measurement (ACFM), because it does not require clean surfaces for inspection, nor any contact with the Surface being inspected, and introduces no extra by-products in the inspection process (no coupling fluids or residues are left behind). The tool produced by OSS is the Robotic Tank Inspection End Effector (RTIEE), which is initially deployed on the tip of the Light Duty Utility Arm (LDUA). The RTEE combines ACFM with a color video camera for both electromagnetic and visual inspection The complete package consists of an end effector, its corresponding electronics and software, and a user's manual to guide the operator through an inspection. The system has both coarse and fine inspection modes and allows the user to catalog defects and suspected areas of leakage in a database for further examination, which may lead to emptying the tank for repair, decommissioning, etc.. The following is an updated report to OSS document OSS-21100-7002, which was submitted in 1995. During the course of the contract, two related sub-tasks arose, the Wall and Coating Thickness Sensor and the Vacuum Scarifying and Sampling Tool Assembly. The first of these sub-tasks was intended to evaluate the corrosion and wall thinning of 55-gallon steel drums. The second was retrieved and characterized the waste material trapped inside the annulus region of the underground tanks on the DOE's tank farms. While these sub-tasks were derived from the original intent

  1. OSE inspection of protection program operations field perspective of inspections

    International Nuclear Information System (INIS)

    Brown, R.W.; Martin, H.R.

    1987-01-01

    Protection Program Operations includes three functional areas: Physical Protection Systems, Protective Forces, and System Performance Testing. The Office of Security Evaluations (OSE) inspects field offices in these areas by evaluating programs relative to Standards and Criteria and by performing a variety of exercises and other types of tests to assure protective systems are effective and maintained at a proper level to meet the defined threat. Their perception of the OSE inspections has been positive. The approach taken by ID, with key areas/activities emphasized, during each phase of the field inspection process is described in this report. The most important areas for field offices to concentrate are: inspection preparations through self-evaluation, improving communications, assigning knowledgeable trusted agents, increasing awareness of facility procedures and operations, and assuring daily validations of inspected areas. Emphasis is placed on striving for a balance in reporting both positive and negative findings, and for consistency between ratings and the importance of report findings. OSE efforts to develop improved rating methodologies are encouraged

  2. 2003 annual report

    International Nuclear Information System (INIS)

    2004-01-01

    The 2003 issue of the annual report of the French nuclear safety authority (ASR) presents the activities of the ASR in the following domains: 2003 highlights (the project of law relative to the nuclear transparency and safety, the EPR reactor project, the radioprotection priorities, the inspection of radioprotection, the action plan for the monitoring of patients' exposure to ionizing radiations, the 2003 heat wave and the operation of nuclear power plants, the national plan of radioactive wastes management, the behaviour of long living and high level radioactive wastes, and the European 'nuclear package'), nuclear activities, ionizing radiations and health hazards, organisation of nuclear safety control and radioprotection, radioprotection and nuclear facilities regulation, control of nuclear activities, public information and transparency, international relations, radiological emergency situations, radiological and biomedical activities, industrial and research activities, transport of radioactive materials, safety and radioprotection of nuclear power plants, research and other nuclear facilities, fuel cycle centers, safety of the definitive shut-down and dismantling of nuclear facilities, radioactive waste management and cleansing of polluted sites. (J.S.)

  3. Annual report

    International Nuclear Information System (INIS)

    1986-01-01

    This is the thirty-ninth annual report of the Atomic Energy Control Board. The period covered by this report is the year ending March 31, 1986. The Atomic Energy Control Board (AECB) was established in 1946, by the Atomic Energy Control Act (AEC Act), (Revised Statues of Canada (R.S.C.) 1970 cA19). It is a departmental corporation (Schedule B) within the meaning and purpose of the Financial Administration Act. The AECB controls the development, application and use of atomic energy in Canada, and participates on behalf of Canada in international measures of control. The AECB is also repsonsible for the administration of the Nuclear Liability Act, (R.S.C. 1970 c29 1st Supp) as amended, including the designation of nuclear installations and the prescription of basic insurance to be carried by the operators of such nuclear installations. The AECB reports to Parliament through a designated Minister, currently the Minister of Energy, Mines and Resources

  4. Do school inspections improve primary school performance?

    OpenAIRE

    Dinand Webbink; Rob Luginbuhl; I. de Wolf

    2007-01-01

    Inspectors from the Dutch Inspectorate of Education inspect primary schools, write inspection reports on each inspected school, and make recommendations as to how each school can improve. We test whether these inspections result in better school performance. Using a fixed-effects model, we find evidence that school inspections do lead to measurably better school performance. Our assessment of school performance is based on the Cito test scores of pupils in their final year of primary school. ...

  5. Development of Inspection Robots for Bridge Cables

    Directory of Open Access Journals (Sweden)

    Hae-Bum Yun

    2013-01-01

    Full Text Available This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

  6. Development of inspection robots for bridge cables.

    Science.gov (United States)

    Yun, Hae-Bum; Kim, Se-Hoon; Wu, Liuliu; Lee, Jong-Jae

    2013-01-01

    This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

  7. Examination of the association between announced inspections and inspection scores.

    Science.gov (United States)

    Waters, A Blake; VanDerslice, James; Porucznik, Christina A; Kim, Jaewhan; DeLegge, Royal; Durrant, Lynne

    2013-09-01

    In 2010 the Salt Lake Valley Health Department conducted a pilot of an announced inspection program utilizing a randomized assignment of restaurants to an intervention group with announced inspections and a control group that remained on the usual schedule of unannounced inspections. After adjusting for food type, visible kitchen, outside quality assurance, season, and standardized inspector, significant reductions were found in the odds ratios of personal hygiene (adjusted odds ratios [aOR] = 0.11, p = .00) and equipment cleanliness (aOR = 0.19, p = .00) violations. In the models for the control group, none of the odds ratios were statistically different from one, indicating no change in the postintervention time period as compared to the preintervention period.

  8. Planning and programming of pre-operational and in-service inspections

    International Nuclear Information System (INIS)

    Udaondo, M.S.

    1984-01-01

    After a brief mention of the actual scope of in-service inspection work, conclusions are presented that relate to the preparations for inspections, making use of experience acquired since 1972 at 11 nuclear power plants in Spain which have commissioned such studies from one particular organization, and analyses are given of the advantages to be gained therefrom. Three different aspects of preparations for inspections are considered: (a) man-hour estimates and the duration of in-service inspections; (b) the sequence of action during a pre-operational inspection (assuming a typical functional organization) from definition of the codes of practice and standards applicable up to the issue of the final report and the schedule for distribution of the annual work load to be invested in a typical project, as a result of combining the two previous estimates, and (c) the documentary aspect of preparations for an inspection during a scheduled outage, as related to the various documents to be drawn up and their contents. Reference is made to the general training to be given to the staff in charge of inspection activities so as to provide them with information on, and a perspective of, the in-service inspection jobs required. (author)

  9. Automated ultrasonic inspection using PULSDAT

    International Nuclear Information System (INIS)

    Naybour, P.J.

    1992-01-01

    PULSDAT (Portable Ultrasonic Data Acquisition Tool) is a system for recording the data from single probe automated ultrasonic inspections. It is one of a range of instruments and software developed by Nuclear Electric to carry out a wide variety of high quality ultrasonic inspections. These vary from simple semi-automated inspections through to multi-probe, highly automated ones. PULSDAT runs under the control of MIPS software, and collects data which is compatible with the GUIDE data display system. PULSDAT is therefore fully compatible with Nuclear Electric's multi-probe inspection systems and utilises all the reliability and quality assurance of the software. It is a rugged, portable system that can be used in areas of difficult access. The paper discusses the benefits of automated inspection and gives an outline of the main features of PULSDAT. Since April 1990 PULSDAT has been used in several applications within Nuclear Electric and this paper presents two examples: the first is a ferritic set-through nozzle and the second is an austenitic fillet weld. (Author)

  10. Improvement of foundation for inspection

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    Japan Nuclear Energy Safety Organization has been carrying out improvement of inspection system for nuclear plants in Japan since 2003FY. The new inspection system was introduced into nuclear power plants in{sub -}2008FY. In this project, improvement of comprehensive plant performance assessment and management tool for the new inspection system are developed. In 2012FY, a trend analysis method of the plant performance was developed with reference to the IAEA literature. And the trend analysis was tried based on the results of the comprehensive plant performance assessment of all domestic plants except Fukushima-Daiichi Nuclear Power Station. In addition, the teaching materials for QMS training guideline were made. And improvement of a quality management system evaluation support tool was performed. (author)

  11. Ultrasonic inspection development at HEDL

    International Nuclear Information System (INIS)

    Day, C.K.; Mech, S.J.; Michaels, T.E.; Dixon, N.E.

    1978-01-01

    Ultrasonic testing methods and equipment are being developed to support preservice and in-service inspection of selected FFTF welds. A digital computer system is employed in the analysis of both simulated FFTF pipe sections and plate specimens containing fatigue cracks. It is anticipated that test evaluation standards containing fatigue cracks will partially eliminate questions formerly associated with weld test calibration producers by providing natural cracks which follow grain boundaries and stress patterns resembling piping situ conditions. Studies have revealed that commercial transducers may satisfy LMFBR ultrasonic pipe inspection applications: The test system evaluation included transducers and wedge coupling and fluid coupling materials which exhibited acceptable performance at temperatures to 2300C. Results are presented that demonstrate the feasibility of ultrasonic inspection of components immersed in sodium at temperatures to 2600C. (UK)

  12. Holography for fast reactor inspection

    International Nuclear Information System (INIS)

    Tozer, B.A.

    1980-01-01

    Holography, an optical process whereby an image of the original subject can be reconstructed in three dimensions, is being developed for use as an optical inspection tool. With a potential information storage density of 10 16 bits/m 2 , the ability to reconstruct in 3 dimensions, a depth of field of up to 8 metres, extremely wide angle of view, and potentially diffraction limited resolution, holography should be invaluable for the optical recording of fast reactors during construction, and the inspection of optically accessible regions during operation, or maintenance down-times. The photographic emulsions used for high resolution holography are fine-grained and fog only very slowly when subjected to γ-radiation, so that inspection of highly radio-active regions and components can be effected satisfactorily. Some of the practical limitations affecting holography are described and ways of overcoming them discussed. Some preliminary results are presented. (author)

  13. Defense Treaty Inspection Readiness Program

    International Nuclear Information System (INIS)

    Cronin, J.J.; Kohen, M.D.; Rivers, J.D.

    1996-01-01

    The Defense Treaty Inspection Readiness Program (DTIRP) was established by the Department of Defense in 1990 to assist defense facilities in preparing for treaty verification activities. Led by the On-Site Inspection Agency (OSIA), an element of the Department of Defense, DTIRP''s membership includes representatives from other Department of Defense agencies, the Department of Energy (DOE), the Central Intelligence Agency, the Federal Bureau of Investigation, the Department of Commerce, and others. The Office of Safeguards and Security has a significant interest in this program, due to the number of national defense facilities within its purview that are candidates for future inspections. As a result, the Office of Safeguards and Security has taken a very active role in DTIRP. This paper discusses the Office of Safeguards and Security''s increasing involvement in various elements of the DTIRP, ranging from facility assessments to training development and implementation

  14. Improvement of foundation for inspection

    International Nuclear Information System (INIS)

    2013-01-01

    Japan Nuclear Energy Safety Organization has been carrying out improvement of inspection system for nuclear plants in Japan since 2003FY. The new inspection system was introduced into nuclear power plants in - 2008FY. In this project, improvement of comprehensive plant performance assessment and management tool for the new inspection system are developed. In 2012FY, a trend analysis method of the plant performance was developed with reference to the IAEA literature. And the trend analysis was tried based on the results of the comprehensive plant performance assessment of all domestic plants except Fukushima-Daiichi Nuclear Power Station. In addition, the teaching materials for QMS training guideline were made. And improvement of a quality management system evaluation support tool was performed. (author)

  15. Radiation control in the nondestructive inspection

    International Nuclear Information System (INIS)

    Kariya, Yukihiro

    1982-01-01

    In the early days of radiation nondestructive inspection about ten years ago, the loss of radiation sources and careless radiation exposure gave the impression of radiography inspection being immediately slipshod management. In this problem, the peculiar nature of the business in this field is involved. In Nondestructive Inspection Co., Ltd., besides the safety management of radioisotopes, the radiation exposure control of personnel in the regular inspection of nuclear power plants has become increasingly important. The following matters are described: radiation utilization in nondestructive inspection (X- and #betta#-ray radiography, #betta#-ray leak test on shield), radiation control problems in nondestructive inspection business (the peculiar aspects of the business, the analysis of the incidents related with nondestructive inspection), and the practice of radiation control in nondestructive inspection in Nondestructive Inspection Co., Ltd. (Mori, K.)

  16. Automated washing of FTA Card punches and PCR setup for reference samples using a LIMS-controlled Sias Xantus automated liquid handler

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Olsen, Addie Nina; Frøslev, Tobias G.

    2009-01-01

    We have implemented and validated automated methods for washing FTA Card punches containing buccal samples and subsequent PCR setup using a Sias Xantus automated liquid handler. The automated methods were controlled by worklists generated by our LabWare Laboratory Information Management System...

  17. High incidence of enteroaggregative Escherichia coli among food handlers in three areas of Kenya: a possible transmission route of travelers' diarrhea.

    Science.gov (United States)

    Oundo, Joseph O; Kariuki, Samuel M; Boga, Hamadi I; Muli, Faith W; Iijima, Yoshio

    2008-01-01

    Contaminated food and water are acknowledged vehicles for the transmission of travelers' diarrhea (TD). Importance of food handlers as reservoirs of enteroaggregative Escherichia coli (EAEC), enteropathogenic E coli (EPEC), and Shiga toxin-producing E coli (STEC) causing TD has not been clearly demonstrated. We undertook a 1-year prospective study to determine the presence and selected risk factors of carriage of EAEC, EPEC, and STEC by 1,399 food handlers working in tourist hotels in three popular tourist destinations of Kenya. Enterotoxigenic E coli (ETEC) was not sought in this study. During the period April 2003 to May 2004, EAEC harboring the aggR gene were detected from 29 (2.1%) subjects and EPEC harboring the eaeA gene and STEC harboring the stx2 gene were detected from 11 (0.8%) and 2 (0.1%) of the study subjects, respectively. Mean age of subjects with EAEC was significantly lower (24.6 y) than the rest of the study population (28.2 y) (p tourist hotels are important carriers of EAEC that could cause TD and a high proportion of the EAEC are MDR. The isolation of MDR EAEC from food handlers working in tourist hotels is of potential public health importance. There is a need for a study employing molecular methods including PFGE to examine carriage of similar pathogens in food handlers, processed foods, and travelers consuming the food who develop diarrhea.

  18. The French nuclear safety authority's experience with radioactive transport inspection

    International Nuclear Information System (INIS)

    Jacob, E.; Aguilar, J.

    2004-01-01

    About 300,000 radioactive material packages are transported annually in France. Most consist of radioisotopes for medical, pharmaceutical or industrial use. On the other hand, the nuclear industry deals with the transport of fuel cycle materials (uranium, fuel assemblies, etc.) and waste from power plants, reprocessing plants and research centers. France is also a transit country for shipments such as spent fuel packages from Switzerland or Germany, which are bound for Sellafield in Great Britain. The French nuclear safety authority (DGSNR: Directorate General for Nuclear Safety and Radioprotection) has been responsible since 1997 for the safety of radioactive material transport. This paper presents DGNSR's experience with transport inspection: a feedback of key points based on 300 inspections achieved during the past five years is given

  19. Rail inspection of RCF defects

    Directory of Open Access Journals (Sweden)

    Z. Popović

    2013-10-01

    Full Text Available Rail defects due to rolling contact fatigue (RCF threaten the traffic safety around the world. That hazard is more distinct on railways without adequate maintenance strategy. Realization of interoperability of European railway network demands from every infrastructure manager to have a maintenance plan for the infrastructure subsystem. Besides that, this plan includes rail inspection and strategy against RCF defects. This paper emphasizes the importance of rail inspection and early detection of RCF because the most of RCF crack should be removed in rail grinding campaigns (preventive, cyclical and corrective activities during the whole rail service life.

  20. Evaluation of inservice inspection examinatiions

    International Nuclear Information System (INIS)

    Aldrich, D.A.; Cook, J.F.

    1990-05-01

    In order to evaluate the effectiveness of Section 11, Division 1, ''Rules for Inservice Inspection of Nuclear Power Plant Components,'' of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code examinations, 26 inservice inspection (ISI) summary reports from 24 facilities were reviewed. It was found that these ASME Code examinations and tests are instrumental in revealing indications and defects in welds and plant components. In addition, this study uncovered that fact that some of the Section 11 requirements are apparently not clear and are misunderstood by some of the facilities. Also, the need for more stringent requirements was evaluated and some Code changes are recommended

  1. Guided acoustic wave inspection system

    Science.gov (United States)

    Chinn, Diane J.

    2004-10-05

    A system for inspecting a conduit for undesirable characteristics. A transducer system induces guided acoustic waves onto said conduit. The transducer system detects the undesirable characteristics of the conduit by receiving guided acoustic waves that contain information about the undesirable characteristics. The conduit has at least two sides and the transducer system utilizes flexural modes of propagation to provide inspection using access from only the one side of the conduit. Cracking is detected with pulse-echo testing using one transducer to both send and receive the guided acoustic waves. Thinning is detected in through-transmission testing where one transducer sends and another transducer receives the guided acoustic waves.

  2. Holographic inspection of nuclear plant

    International Nuclear Information System (INIS)

    Gordon, A.L.; Armour, I.A.; Glanville, R.; Malcolm, G.J.; Wright, D.G.

    1988-01-01

    The high resolution, enormous depth of field and high tolerance to radiation of holography mean that it has great potential as an inspection tool in the nuclear industry. In addition, the ability of double-pulse holography to yield detailed information on vibration over the whole field of both large and small structures provides measurements that often cannot be obtained in any other way. This paper reviews the development of equipment for the holographic inspection of nuclear fuel elements; a portable holocamera for use inside reactors; and the application of holographic techniques for vibration measurements in a nuclear power station. (author)

  3. Operational phase of inspection prioritization

    International Nuclear Information System (INIS)

    Campbell, D.J.; Guthrie, V.H.; Flanagan, G.F.

    1986-01-01

    Inspectors must make many decisions on the allocation of their efforts. To date, these decisions have been made based upon their own judgment and guidance from inspection procedures. Our goal is to provide probabilistic risk assessment (PRA) information as an additional aid to inspectors. A structured approach for relating PRA information to specific inspection decisions has been developed. The use of PRA information as an aid in optimal decision making: (1) in response to the current plant status and (2) in the scheduling of effort over an extended period of time is considered

  4. RIMACS, Reactor Inspection Main Control System

    International Nuclear Information System (INIS)

    2008-01-01

    1 - Description of program or function: RIMACS prepares for automatic inspection files on each inspection item for the reactor. These automatic inspection files provide the data to move RIROB (Reactor Inspection Robot) with laser by interpreting the coordinates of LASPO (Laser Positioner) and the laser detecting device of RIROB in three dimensional space. In addition, when RIROB arrives at the inspecting location, the files provide all values of the manipulator's motions to acquire the ultrasonic data. RIMACS provides various modules in order to perform these complex functions, and the functions are programmed on graphic user interface for the convenience of the user. RIMACS provides various functions, such as insertion of reactor production data, selection of the reactor for inspection, the creation of automatic inspection file, the selection of the inspection item, inspection simulation, and automatic inspection procedures. It also provides all other functions, which are necessary for the inspection, such as operating program download and manual control of LASPO and RIROB, the inspection simulation and the inspection status display by means of the graphic screen, and SODAS (ultra-Sonic Data Acquisition System) drive verification. 2 - Methods: Moving path and operation procedures for inspection robot are generated automatically with Kinematics algorithm. 3 - Restrictions on the complexity of the problem: A graphics display with MS-Window capability is required

  5. Northeast Inspection Services, Inc. boresonic inspection system evaluation

    International Nuclear Information System (INIS)

    Nottingham, L.D.; Sabourin, P.F.; Presson, J.H.

    1993-04-01

    Turbine rotor reliability and remaining life assessment are continuing concerns to electric utilities. Over the years, boresonic inspection and evaluation have served as primary components in rotor remaining life assessment. Beginning with an evaluation of TREES by EPRI in 1982, a series of reports that document the detection and sizing capabilities of several boresonic systems have been made available. These studies should provide utilities with a better understanding of system performance and lead to improved reliability when predicting rotor remaining life. In 1990, the procedures followed for evaluating rotor boresonic performance capabilities were changed to transfer a greater portion of the data analysis function to the participating vendor. This change from previous policy was instituted so that the evaluation results would better reflect the ''final answer'' that a vendor would provide in a real rotor inspection and also to reduce the cost of an evaluation. Among the first vendors to participate in the new performance demonstration was Northeast Inspection Services, Inc. (NISI). The tests reported herein were conducted by NISI personnel under the guidelines of the new plan. Details of the new evaluation plan are also presented. Rotor bore blocks containing surface-connected fatigue cracks, embedded glass beads, and embedded radial-axial oriented disks were used in the evaluation. Data were collected during twenty-five independent passes through the blocks. The evaluation consisted of statistical characterization of the detection capabilities, flaw sizing and location accuracy, and repeatability of the inspection system. The results of the evaluation are included in this report

  6. Estimated exposure of hands inside the protective gloves used by non-occupational handlers of agricultural pesticides.

    Science.gov (United States)

    Beránková, Martina; Hojerová, Jarmila; Peráčková, Zuzana

    2017-11-01

    Exposure of handlers'/operators' hands is a main route of agricultural pesticides entry into their body. Non-occupational handlers still lack information about appropriate selection of protective gloves to minimize exposure and reduce adverse effects of these chemicals. According to the results of our previous survey, six commercially available, water-resistant gloves commonly used by non-professional gardeners were evaluated for permeation of Acetamiprid, Pirimicarb, and Chlorpyrifos-methyl (Chlorp-m) pesticides by means of in vitro testing. In-use conditions were mimicked as close as possible. Chlorp-m through latex was observed inside the glove from >10 to ⩽15 min; however, Acetamiprid and Pirimicarb through neoprene/latex and all the three pesticides through butyl were not observed inside gloves for the duration of the experiments (the Breakthrough time (BT)>8 h). The 1-h exposure proved the interior glove contamination with Chlorp-m through disposable latex, vinyl, and nitrile gloves (51, 33, and 41% of applied dose (AD), respectively) just as with Acetamiprid and Pirimicarb through latex glove (11 and 14%AD, respectively). However, when storing the used gloves for 4 days after the exposure, no release of the three pesticides from the butyl and Acetamiprid from neoprene/latex gloves was detected. In all other cases, pesticides were found in the interior glove (36-79, 31-63, and 51-81%AD for Acetamiprid, Pirimicarb, and Chlorp-m, respectively). If used repeatedly, gloves contaminated in this way lose their protective function but give the user a false sense of security. The results suggest that (i) water-resistant gloves are not necessarily pesticide resistant; (ii) disposable latex gloves commonly worn by non-professional gardeners provide inadequate protection even for a short-time contact with pesticides; (iii) to assess the efficiency of reusable gloves, not only BT value but also the reservoir/release effect of parent pesticide and its degradation

  7. Special Engineering Services to Establish Inspection Criteria for Bearings to Improve Life Prediction.

    Science.gov (United States)

    1979-12-01

    ll i . -- II 53 I V. REFERENCES 1. Barton, J. R., "Early Fatigue Damage Detection in 4140 Steel Tubes", Proc. Fifth Annual Symposium on NDE of...34Advanced Non- destructive Testing Methods for Bearing Inspection", SAE Paper No. 720172, Automotive Engineering Congress, Detroit, Michigan, January

  8. 40 CFR 63.7917 - What are my inspection and monitoring requirements for transfer systems?

    Science.gov (United States)

    2010-07-01

    ... annually inspect the unburied portion of pipeline and all joints for leaks and other defects. In the event that a defect is detected, you must repair the leak or defect according to the requirements of... days after detection and repair shall be completed as soon as possible but no later than 45 calendar...

  9. IRSN annual report 2011

    International Nuclear Information System (INIS)

    2012-01-01

    IRSN, a public authority with industrial and commercial activities, was set up under Article 5 of French Act No. 2001-398 of May 9, 2001, enacted through Order No. 2002-254 of February 22, 2002. This Order was amended on April 7, 2007. The Institute is placed under the joint authority of the Ministries of Defense, the Environment, Industry, Research, and Health. It is the nation's public service expert in nuclear and radiation risks, and its activities cover all the related scientific and technical issues. Its areas of specialization include the environment and radiological emergency response, human radiation protection in both a medical and professional capacity, and in both normal and post-accident situations, the prevention of major accidents, nuclear reactor safety, as well as safety in plants and laboratories, transport and waste treatment, and nuclear defense expertise. IRSN interacts with all parties concerned by these risks (public authorities, in particular nuclear safety and security authorities, local authorities, companies, research organizations, stakeholders' associations, etc.) to contribute to public policy issues relating to nuclear safety, human and environmental protection against ionizing radiation, and the protection of nuclear materials, facilities, and transport against the risk of malicious acts. This document is the 2011 annual report of IRSN. It presents the Organization, Progress and main activities in 2011, Transparency and communications policy, safety and radiation protection culture of IRSN. The main activities in 2011 are presented in details: 1 - Safety: Safety of existing facilities: Monitoring reactors, Monitoring fuel cycle facilities and experimental reactors, Containment and fire, Natural hazards, Fuels, Accidents, About defense; Conducting assessments of future facilities: Future waste repositories, Reactors of the future; 2 - Security and non-proliferation: Protection against malicious act; Activities of the advisory

  10. Quarterly, Bi-annual and Annual Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Quarterly, Bi-annual and Annual Reports are periodic reports issued for public release. For the deep set fishery these reports are issued quarterly and anually....

  11. Inservice Inspection in the Fugen

    OpenAIRE

    1983-01-01

    Pressure tube type reactors have specific components orstructures,compared with light water reactors.They are(1) steam drums(2) reactor inlet headers(3) reactor inlet and outlet pipies(4) pressure tubes.Much attention is paid upon Inservice Inspection (ISI)of the above components.

  12. Nuclear fuel shipping inspection device

    International Nuclear Information System (INIS)

    Takahashi, Toshio; Hada, Koji.

    1988-01-01

    Purpose: To provide an nuclear fuel shipping inspection device having a high detection sensitivity and capable of obtaining highly reliable inspection results. Constitution: The present invention concerns a device for distinguishing a fuel assembly having failed fuel rods in LMFBR type reactors. Coolants in a fuel assembly to be inspected are collected by a sampling pipeway and transferred to a filter device. In the filter device, granular radioactive corrosion products (CP) in the coolants are captured, to reduce the background. The coolants, after being passed through the filter device, are transferred to an FP catching device and gamma-rays of iodine and cesium nuclides are measured in FP radiation measuring device. Subsequently, the coolants transferred to a degasing device to separate rare gas FP in the coolants from the liquid phase. In a case if rare gas fission products are detected by the radiation detector, it means that there is a failed fuel rod in the fuel assembly to be inspected. Since the CP and the soluble FP are separated and extracted for the radioactivity measurement, the reliability can be improved. (Kamimura, M.)

  13. FAA Fluorescent Penetrant Laboratory Inspections

    Energy Technology Data Exchange (ETDEWEB)

    WINDES,CONNOR L.; MOORE,DAVID G.

    2000-08-02

    The Federal Aviation Administration Airworthiness Assurance NDI Validation Center currently assesses the capability of various non-destructive inspection (NDI) methods used for analyzing aircraft components. The focus of one such exercise is to evaluate the sensitivity of fluorescent liquid penetrant inspection. A baseline procedure using the water-washable fluorescent penetrant method defines a foundation for comparing the brightness of low cycle fatigue cracks in titanium test panels. The analysis of deviations in the baseline procedure will determine an acceptable range of operation for the steps in the inspection process. The data also gives insight into the depth of each crack and which step(s) of the inspection process most affect penetrant sensitivities. A set of six low cycle fatigue cracks produced in 6.35-mm thick Ti-6Al-4V specimens was used to conduct the experiments to produce sensitivity data. The results will document the consistency of the crack readings and compare previous experiments to find the best parameters for water-washable penetrant.

  14. Artificial Intelligence Assists Ultrasonic Inspection

    Science.gov (United States)

    Schaefer, Lloyd A.; Willenberg, James D.

    1992-01-01

    Subtle indications of flaws extracted from ultrasonic waveforms. Ultrasonic-inspection system uses artificial intelligence to help in identification of hidden flaws in electron-beam-welded castings. System involves application of flaw-classification logic to analysis of ultrasonic waveforms.

  15. Chapter 4. Assessment and inspection of nuclear installations

    International Nuclear Information System (INIS)

    2001-01-01

    Supervisory activity of Nuclear Regulatory Authority of the Slovak Republic (UJD) upon the safety of nuclear installations in compliance with the 'Atomic Act' and other legal regulations includes also inspection and assessment activities of UJD. Assessment activity of UJD in relation to nuclear installations lies in assessment of safety documentation for constructions realised as nuclear installations, or constructions through which changes are realised on nuclear installations. The scope of safety documentation required for the assessment is stipulated in the Atomic Act. In 2000 the assessment activity focused first of all on Unit 1 of NPP Bohunice after completing its Gradual Reconstruction Programme, on National Repository of Radioactive waste in Mochovce and on radioactive waste conditioning and treatment technology in Jaslovske Bohunice. Activities of UJD in assessment focused mainly on control of compliance with requirements for nuclear safety, assessment of commissioning programmes, operating procedures, limits and conditions, etc. The assessment of changes, which influence nuclear safety of nuclear installations in operation, realisation of which is conditioned by the approval from UJD, is a significant part of the assessment activity of UJD. Mainly it is the assessment of design changes, changes in limits and conditions, operating procedures, changes in programmes of periodical testing of equipment important in terms of nuclear safety, changes in physical protection of nuclear equipment, etc. The assessment of nuclear installations operational safety, based on assessment of operational events, on maintaining limits and conditions of safe operation, on operational safety performance indicators and on inspection results is a separate category in the assessment activity of UJD. Inspection activity specified in the 'Atomic Act' is governed by an internal guideline, an important part of which is an annual inspection plan that considers the following types of

  16. Assessment of knowledge, attitude and practice of food allergies among food handlers in the state of Penang, Malaysia.

    Science.gov (United States)

    Shafie, A A; Azman, A W

    2015-09-01

    Food handler's knowledge, attitude and practice regarding food allergies are important to prevent debilitating and sometimes fatal reactions. This study aimed to assess their food allergy knowledge, attitude and practice, which could help to maintain the safety and hygiene of food consumed by the public. Cross-sectional survey. A cross-sectional survey involving 121 conveniently sampled (81.76% response rate) respondents among the food handlers in the state of Penang, Malaysia, was conducted using a validated self-administered questionnaire. Their knowledge, attitude and work practice were captured using a 37-item questionnaire that elicited their responses using a mixture of closed-ended and Likert scale techniques. The mean knowledge score for respondents was 50.23 (SD = 14.03), attitude score was 54.26 (SD = 11.67) and practice score was 45.90 (SD = 24.78). Only 1.79% of the respondents were considered to have excellent knowledge, 21.37% had a low risk practice and 4.27% had positive attitudes towards food allergies. Most of the respondents (70%) knew about food allergies and their seriousness. There was a statistically significant correlation between the attitude and practice of respondents (r = 0.51). The type of establishment was the only characteristic significantly associated (P safety training programmes is needed to reduce food allergy risks and prevent fatal allergic reactions to food among their customers. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  17. Adherence to Healthcare Waste Management Guidelines among Nurses and Waste Handlers in Thika Sub-county- Kenya.

    Science.gov (United States)

    Njue, P Mwaniki; Cheboi, K Solomon; Shadrak, Oiye

    2015-10-01

    Despite the set guidelines on Healthcare Waste Management in Kenya, mixing of different categories of waste, crude dumping and poor incineration are still a common phenomenon in public health facilities in Thika Subcounty, Kenya. Thika Subcounty generates 560 Kilograms of healthcare waste daily, which is risk to the many patients (admission rate of 26%). This may pose a potential environmental risk and be a source of disease diffusion. This research explored the adherence to healthcare waste management waste guidelines in health care facilities among the nurses and waste handlers. This was a cross sectional survey in which mixed methods were applied. A census and proportionate random sampling method were used. Quantitative data was analyzed using Statistical Package for Social Science (SPSS) version 20.0, while qualitative data was analyzed manually into themes. Full adherence to the seven waste disposal guidelines was low (16.3%). Knowledge on waste segregation, waste separation then disposal and means of transports were statistically significant in relation to adherence. The type of incinerator and burning status, protection maintenance and supply of adequate waste bins were also important to adherence level. Adherence level was low (16.3%,) and insignificantly different among nurses and waste handlers. From this finding, compliance remains a key challenge. Strategies targeted at contextualizing waste regulations and guidelines into local settings are necessary and important. Policy makers may design and implement standard incinerators across all the health facilities. This study is not exhaustive; therefore, it is necessary to carry out a study linking poor treatment and disposal of clinical waste to purported health outcomes in Kenya.

  18. 49 CFR 213.365 - Visual inspections.

    Science.gov (United States)

    2010-10-01

    ... initiate remedial action. (e) Each switch, turnout, track crossing, and lift rail assemblies on moveable bridges shall be inspected on foot at least weekly. The inspection shall be accomplished in accordance...

  19. CAT -- computer aided testing for resonant inspection

    International Nuclear Information System (INIS)

    Foley, David K.

    1998-01-01

    Application of computer technology relates to inspection and quality control. The computer aided testing (CAT) can be used to analyze various NDT technologies, such as eddy current, ultrasonics, and resonant inspection

  20. Allegheny County Housing and Community Environment Inspections

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Residential housing inspections and inspections in response to complaints for community environment problems, such as open vacant structures, vacant lots with...

  1. Machine vision inspection of railroad track

    Science.gov (United States)

    2011-01-10

    North American Railways and the United States Department of Transportation : (US DOT) Federal Railroad Administration (FRA) require periodic inspection of railway : infrastructure to ensure the safety of railway operation. This inspection is a critic...

  2. Allegheny County Weights and Measures Inspections

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Inspections conducted by the Allegheny County Bureau of Weights and Measures. The Bureau inspects weighing and timing devices such as gas pumps, laundromat timers,...

  3. The evidence base for school inspection frameworks

    NARCIS (Netherlands)

    Scheerens, Jaap; Ehren, Melanie Catharina Margaretha; Ehren, Melanie C.M.

    2016-01-01

    This chapter describes how Inspectorates of Education operationalize different inspection goals (control, improvement, and liaison) in their inspection indicator frameworks. The chapter provides an overview and examples of the indicators used across a number of countries and how these are

  4. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, For Calendar Year 2011

    International Nuclear Information System (INIS)

    2012-01-01

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2011 and includes inspection and repair activities completed at the following CAUs: (1) CAU 400: Bomblet Pit and Five Points Landfill (TTR); (2) CAU 407: Roller Coaster RadSafe Area (TTR); (3) CAU 424: Area 3 Landfill Complexes (TTR); (4) CAU 453: Area 9 UXO Landfill (TTR); and (5) CAU 487: Thunderwell Site (TTR) Inspections were conducted according to the post-closure plans in the approved Closure Reports. The post-closure inspection plan for each CAU is included in Appendix B. The inspection checklists are included in Appendix C, field notes are included in Appendix D, and photographs taken during inspections are included in Appendix E. The annual post-closure inspections were conducted May 3 and 4, 2011. Maintenance was performed at CAU 424, CAU 453, and CAU 487. At CAU 424, two surface grade monuments at Landfill Cell A3-3 could not be located during the inspection. The two monuments were located and marked with lava rock on July 13, 2011. At CAU 453, there was evidence of animal burrowing. Animal burrows were backfilled on July 13, 2011. At CAU 487, one use restriction warning sign was missing, and wording was faded on the remaining signs. A large animal burrow was also present. The signs were replaced, and the animal burrow was backfilled on July 12, 2011. As a best management practice, the use restriction warning signs at CAU 407 were replaced with standard Federal Facility Agreement and Consent Order signs on July 13, 2011. Vegetation monitoring was performed at the CAU 400 Five Points Landfill and CAU 407 in June 2011, and the vegetation monitoring report is included in Appendix F.

  5. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, For Calendar Year 2011

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2012-02-21

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2011 and includes inspection and repair activities completed at the following CAUs: (1) CAU 400: Bomblet Pit and Five Points Landfill (TTR); (2) CAU 407: Roller Coaster RadSafe Area (TTR); (3) CAU 424: Area 3 Landfill Complexes (TTR); (4) CAU 453: Area 9 UXO Landfill (TTR); and (5) CAU 487: Thunderwell Site (TTR) Inspections were conducted according to the post-closure plans in the approved Closure Reports. The post-closure inspection plan for each CAU is included in Appendix B. The inspection checklists are included in Appendix C, field notes are included in Appendix D, and photographs taken during inspections are included in Appendix E. The annual post-closure inspections were conducted May 3 and 4, 2011. Maintenance was performed at CAU 424, CAU 453, and CAU 487. At CAU 424, two surface grade monuments at Landfill Cell A3-3 could not be located during the inspection. The two monuments were located and marked with lava rock on July 13, 2011. At CAU 453, there was evidence of animal burrowing. Animal burrows were backfilled on July 13, 2011. At CAU 487, one use restriction warning sign was missing, and wording was faded on the remaining signs. A large animal burrow was also present. The signs were replaced, and the animal burrow was backfilled on July 12, 2011. As a best management practice, the use restriction warning signs at CAU 407 were replaced with standard Federal Facility Agreement and Consent Order signs on July 13, 2011. Vegetation monitoring was performed at the CAU 400 Five Points Landfill and CAU 407 in June 2011, and the vegetation monitoring report is included in Appendix F.

  6. AMIRA international annual report 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    AMIRA International Limited is an independent association of companies to promote research in fields of interests to the mineral, coal and petroleum industries and provides its services to members in many parts of the world. The annual report contains the chairman's report, chief executive officier's report, details of operations, members and research, and a summary of research programmes in the following areas: geoscience, mine engineering, mineral processing, extractive metallurgy; multi-disciplinary; and sustainability. It contains a concise financial report for the year ended 30 June 2007. Details of projects in each area are given. Topics include: mineral flotation, hoist rope inspection and 3D imaging for underground mining.

  7. Improvement of testing techniques for inspecting steam turbine rotor in power plant

    International Nuclear Information System (INIS)

    Su, Yeong Shuenn; Wei, Chieng Neng; Wu, Chien Wen; Wu, Yung How

    1997-01-01

    Steam turbine rotor is important to the Utility industry, it degrades over time due to fatigue and corrosion under high temperature and high pressure environment. Periodic inspection is required in the wake of plant annual overhaul to ensure the integrity of turbine rotor. Non-Destructive Testing of turbine rotor is usually performed using magnetic particle testing with wet fluorescent magnetic particle. However, it is very difficult to ensure the reliability of inspection due to the limitation of using one NDT method only. The crack-susceptible areas, such as turbine blade, and blade root have high incidence of stress corrosion cracking, The blade root section is difficult to locate cracks because of the complex geometry which may cause inadequate magnetic field and poor accessibility. Improved inspection practices was developed by our Department, together with remaining life analysis, in maintaining the high availability of steam turbine rotor. The newly-developed inspection system based on the practical study of magnetic field strength distribution, quality of magnetic particle bath and a combination of different NDT methods with Eddy Current Testing using absolute pen-type coil and Visual Testing using reflective mirror to examine the key areas concerned are described. TPC' experience with the well-trained technicians together with the adequate inspection procedure in detecting blade-root flaws are also discussed in the paper. Many of these inspection improvement have been applied in the fields for several times and the inspection reliability has been enhanced substantially. Results are quite encouraging and satisfactory.

  8. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, For Calendar Year 2007

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2008-06-01

    This report provides the results of the semiannual post-closure inspections conducted at the closed Corrective Action Unit (CAU) sites located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2007 and includes inspection and repair activities completed at the following nine CAUs: (1) CAU 400: Bomblet Pit and Five Points Landfill (TTR); (2) CAU 404: Roller Coaster Lagoons and Trench (TTR); (3) CAU 407: Roller Coaster RadSafe Area (TTR); (4) CAU 423: Area 3 Underground Discharge Point, Building 0360 (TTR); (5) CAU 424: Area 3 Landfill Complexes (TTR); (6) CAU 426: Cactus Spring Waste Trenches (TTR); (7) CAU 427: Area 3 Septic Waste Systems 2, 6 (TTR); (8) CAU 453: Area 9 UXO Landfill (TTR); and (9) CAU 487: Thunderwell Site (TTR). In a letter from the Nevada Division of Environmental Protection (NDEP) dated December 5, 2006, NDEP concurred with the request to reduce the frequency of post-closure inspections of CAUs at TTR to an annual frequency. This letter is included in Attachment B. Post-closure inspections were conducted on May 15-16, 2007. All inspections were conducted according to the post-closure plans in the approved Closure Reports. The post-closure inspection plan for each CAU is included in Attachment B, with the exception of CAU 400. CAU 400 does not require post-closure inspections, but inspections of the vegetation and fencing are conducted as a best management practice. The inspection checklists for each site inspection are included in Attachment C, the field notes are included in Attachment D, and the site photographs are included in Attachment E. Vegetation monitoring of CAU 400, CAU 404, CAU 407, and CAU 426 was performed in May 2007, and the vegetation monitoring report is included in Attachment F. Maintenance and/or repairs were performed at CAU 453. Animal burrows observed during the annual inspection at CAU 453 were backfilled on August 1, 2007. At this time, the TTR post-closure site inspections should continue as

  9. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, For Calendar Year 2007

    International Nuclear Information System (INIS)

    NSTec Environmental Restoration

    2008-01-01

    This report provides the results of the semiannual post-closure inspections conducted at the closed Corrective Action Unit (CAU) sites located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2007 and includes inspection and repair activities completed at the following nine CAUs: (1) CAU 400: Bomblet Pit and Five Points Landfill (TTR); (2) CAU 404: Roller Coaster Lagoons and Trench (TTR); (3) CAU 407: Roller Coaster RadSafe Area (TTR); (4) CAU 423: Area 3 Underground Discharge Point, Building 0360 (TTR); (5) CAU 424: Area 3 Landfill Complexes (TTR); (6) CAU 426: Cactus Spring Waste Trenches (TTR); (7) CAU 427: Area 3 Septic Waste Systems 2, 6 (TTR); (8) CAU 453: Area 9 UXO Landfill (TTR); and (9) CAU 487: Thunderwell Site (TTR). In a letter from the Nevada Division of Environmental Protection (NDEP) dated December 5, 2006, NDEP concurred with the request to reduce the frequency of post-closure inspections of CAUs at TTR to an annual frequency. This letter is included in Attachment B. Post-closure inspections were conducted on May 15-16, 2007. All inspections were conducted according to the post-closure plans in the approved Closure Reports. The post-closure inspection plan for each CAU is included in Attachment B, with the exception of CAU 400. CAU 400 does not require post-closure inspections, but inspections of the vegetation and fencing are conducted as a best management practice. The inspection checklists for each site inspection are included in Attachment C, the field notes are included in Attachment D, and the site photographs are included in Attachment E. Vegetation monitoring of CAU 400, CAU 404, CAU 407, and CAU 426 was performed in May 2007, and the vegetation monitoring report is included in Attachment F. Maintenance and/or repairs were performed at CAU 453. Animal burrows observed during the annual inspection at CAU 453 were backfilled on August 1, 2007. At this time, the TTR post-closure site inspections should continue as

  10. Remote inspection system for nuclear power plants

    International Nuclear Information System (INIS)

    Inagaki, K.; Fujii, M.; Doi, A.; Harima, T.

    1977-01-01

    A remote inspection system for nuclear power plants was constructed based on an analysis of inspections performed by an operator on patrol. This system consists of an operator's console and a remote station. The remote station, equipped with five kinds of sensors, is steered along the inspection route by a photoelectric guiding system or may be manually controlled from an operator's console in a main control room. Signals for control and inspection data are multiplexed and transmitted through a coaxial cable

  11. Experimental Stress Analysis at Railway Inspection Pit

    Directory of Open Access Journals (Sweden)

    Nicuşor Laurentiu Zaharia

    2008-10-01

    Full Text Available Railway inspection pits are used in railway halls. The purpose of inspection pits is to allow the working under the vehicle. Inspection pits can be found in locomotive depots, factories etc. The new design for a inspection pit in a railway hall involve tests in purpose of homologations the railway infrastructure. Before the homologation committee meeting, tests are made; after the test, a testing report is made which it will be part at homologation documents.

  12. 49 CFR 396.13 - Driver inspection.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS INSPECTION, REPAIR, AND MAINTENANCE § 396.13 Driver inspection. Before driving a motor vehicle, the driver shall: (a) Be satisfied that the motor vehicle is in safe operating condition; (b) Review the last driver vehicle inspection...

  13. A probe for Eddy current inspection devices

    International Nuclear Information System (INIS)

    1974-01-01

    The invention relates to a surface probe for Eddy current inspection devices. According to the invention, said probe comprises two magnetic core windings, with their axes in parallel relationship and at right angles to the surface of the part to be inspected. This can be applied to the nondestructive inspection of reactor components [fr

  14. 14 CFR 145.223 - FAA inspections.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false FAA inspections. 145.223 Section 145.223... OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.223 FAA inspections. (a) A certificated repair station must allow the FAA to inspect that repair station at any time to determine...

  15. Savannah River Plant waste tank inspection manual

    International Nuclear Information System (INIS)

    McNatt, F.G.

    1979-01-01

    This manual is to aid in making visual and photographic inspections and steel thickness measurements of Building 241-F and -H underground waste storage tanks. It describes the inspection program, the storage tanks, the equipment and techniques used and the results of their application, and the inspection recordkeeping methods

  16. 10 CFR 21.41 - Inspections.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Inspections. 21.41 Section 21.41 Energy NUCLEAR REGULATORY COMMISSION REPORTING OF DEFECTS AND NONCOMPLIANCE Inspections, Records § 21.41 Inspections. Each individual, corporation, partnership, dedicating entity, or other entity subject to the regulations in this part shall...

  17. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1994-04-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period form January 1994 through March 1994. A list of selected bulletins and information notices involving vendor issues and copies of pertinent correspondence involving vendor issues are also included in this periodical

  18. Airplane tire inspection by image processing techniques

    OpenAIRE

    Jovancevic , Igor; Arafat , Al; Orteu , Jean-José; Sentenac , Thierry

    2016-01-01

    International audience; In this paper, we propose a new approach to detect and inspect airplane tires. We use normalized correlation based template matching to detect tires and GrabCut segmentation method to extract them from the background. We inspect the tires condition by investigating the tire treads. Ridge based intensity profiling gives satisfying inspection results.

  19. Generator acceptance test and inspection report

    International Nuclear Information System (INIS)

    Johns, B.R.

    1997-01-01

    This Acceptance Test Report(ATR) is the completed testing and inspection of the new portable generator. The testing and inspection is to verify that the generator provided by the vendor meets the requirements of specification WHC-S-0252, Revision 2. Attached is various other documentation to support the inspection and testing

  20. 42 CFR 456.602 - Inspection team.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Inspection team. 456.602 Section 456.602 Public... Institutions for Mental Diseases § 456.602 Inspection team. (a) A team, as described in this section and § 456... team conducting periodic inspections must have a least one member who is at physician or registered...

  1. Boresonic inspection of power plant rotors

    International Nuclear Information System (INIS)

    Rennie, I.S.

    1990-01-01

    Continental Field Machining and NEI Parsons together are able to provide an on site machining and boresonic inspection service. NEI Parsons existing boresonic equipment is described together with a summary of results obtained during the inspection of eighty rotors. A computer controlled automatic inspection system, planned to be in operation early in 1990, is also described

  2. Mechanized ultrasonic inspection of austenitic pipe systems

    International Nuclear Information System (INIS)

    Dressler, K.; Luecking, J.; Medenbach, S.

    1999-01-01

    The contribution explains the system of standard testing methods elaborated by ABB ZAQ GmbH for inspection of austenitic plant components. The inspection tasks explained in greater detail are basic materials testing (straight pipes, bends, and pipe specials), and inspection of welds and dissimilar welds. The techniques discussed in detail are those for detection and sizing of defects. (orig./CB) [de

  3. Track type ultrasonic inspection device

    International Nuclear Information System (INIS)

    Kajiyama, Shigeru; Sasaki, Tsukasa; Takahisa, Kazuo.

    1993-01-01

    The present invention concerns an improvement of a scanning device disposed near an object to be inspected such as a nuclear pressure vessel and having an ultrasonic probe, mounted thereon that travel along a running track. Specifically, one of wheel supports on both sides is attached being secured to the scanning device. The other of the supports is capable of fixing and releasing, as well as providing and releasing pressure to and from wheels upon mounting and detachment. This enables to provide a structure capable of pressing the wheels of the running device to the plane of the track and release thereof. Accordingly, it is possible to improve the running performance, reduce the size and weight and shorten the time for mounting and detachment of the running inspection device. (I.S.)

  4. Nuclear fuel pellet inspection system

    International Nuclear Information System (INIS)

    Ahmed, H.J.; Beatty, J.M.; Kugler, R.W.

    1992-01-01

    At least one axially extending linear portion of the peripheral surface of the pellet is optically sensed, a set of digital values representative of the pellet surface is generated, and the set is compared to a predetermined standard. Groups of adjacent locations on the surface of the pellet having values greater or less than the predetermined standard are identified, and the pellet is rejected, when a flawed area exceeds a predetermined size. During inspection, the pellet is moved axially through an inspection station by parallel support rolls, spaced by a distance less than the pellet diameter. The rolls are rotated upward and outward from each other, rotating the pellet, and chain dogs are positioned between the spaced rolls for engaging a pellet and moving it along the rolls. The pellet is rejected if its peripheral surface area is too great, and a reference pellet may be used. (author)

  5. Drum inspection robots: Application development

    International Nuclear Information System (INIS)

    Hazen, F.B.; Warner, R.D.

    1996-01-01

    Throughout the Department of Energy (DOE), drums containing mixed and low level stored waste are inspected, as mandated by the Resource Conservation and Recovery Act (RCRA) and other regulations. The inspections are intended to prevent leaks by finding corrosion long before the drums are breached. The DOE Office of Science and Technology (OST) has sponsored efforts towards the development of robotic drum inspectors. This emerging application for mobile and remote sensing has broad applicability for DOE and commercial waste storage areas. Three full scale robot prototypes have been under development, and another project has prototyped a novel technique to analyze robotically collected drum images. In general, the robots consist of a mobile, self-navigating base vehicle, outfitted with sensor packages so that rust and other corrosion cues can be automatically identified. They promise the potential to lower radiation dose and operator effort required, while improving diligence, consistency, and documentation

  6. Radiographic inspection on offshore platforms

    International Nuclear Information System (INIS)

    Soares, Sergio Damasceno; Sperandio, Augusto Gasparoni

    1994-01-01

    One of the great challenges for non-destructive inspection is on offshore platforms, where safety is a critical issue. Inspection by gammagraphy is practically forbidden on the platform deck due to problems to personnel safety and radiological protection. Ir-192 sources are used and the risk of an accident with loss of radioisotope must be considered. It is unfeasible to use gammagraphy, because in case of an accident the rapid evacuation from the platform would be impossible. This problem does not occur when X-ray equipment is used as the radiation source. The limited practicality and portability of the X-ray equipment have prevented its use as a replacement for the gammagraphy. This paper presents the preliminary tests to see the viable use of radiographic tests with constant potential on offshore platforms. (author). 2 refs., 1 fig., 2 tabs, 3 photos

  7. Working group 8: inspection tools

    Energy Technology Data Exchange (ETDEWEB)

    Billey, Deb; Kania, Richard; Nickle, Randy; Wang, Rick; Westwood, Stephen

    2011-07-01

    This eighth working group of the Banff 2011 conference discussed the inspection tools and techniques used by the upstream and downstream pipeline industry to evaluate pipeline integrity. Special attention was given to the challenges and successes related to in-line inspection (ILI) technology. The background of current dent assessment criteria in B31.8 was presented, including dent definition for ILI vendors and pipeline operators as well as codes (CSA Z662 and B31.8). The workshop described examples of dents and assessments showing inconsistency with current criteria as set out by TCPL and Marathon. This workshop produced a single, industry-wide definition of the dent. It was found that the strain based criteria were more practical because depth based is conservative and may miss shallow occurrences. The creation of joint industry group was proposed to develop strain based criteria for incorporation into CSAZ662 and B31.8.

  8. Regulatory inspection of BARC facilities

    International Nuclear Information System (INIS)

    Rajdeep; Jayarajan, K.

    2017-01-01

    Nuclear and radiation facilities are sited, constructed, commissioned, operated and decommissioned, in conformity with the current safety standards and codes. Regulatory bodies follow different means to ensure compliance of the standards for the safety of the personnel, the public and the environment. Regulatory Inspection (RI) is one of the important measures employed by regulatory bodies to obtain the safety status of a facility or project and to verify the fulfilment of the conditions stipulated in the consent

  9. Fuel element box inspection device

    International Nuclear Information System (INIS)

    Ortmayer, R.M.; Pick, W.

    1985-01-01

    The invention concerns a device for inspecting the outer geometry of a long fuel element box by measuring the surface contours over its longitudinal crossection and along its length by sensors. These are kept in a sledge which can be moved along the fuel element guide in a slot guide. The measurement signals reach an evaluation device outside the longitudinal box. (orig./HP) [de

  10. Can non-destructive inspection be reliable

    International Nuclear Information System (INIS)

    Silk, M.G.; Stoneham, A.M.; Temple, J.A.G.

    1988-01-01

    The paper on inspection is based on the book ''The reliability of non-destructive inspection: assessing the assessment of structures under stress'' by the present authors (published by Adam Hilger 1987). Emphasis is placed on the reliability of inspection and whether cracks in welds or flaws in components can be detected. The need for non-destructive testing and the historical attitudes to non-destructive testing are outlined, along with the case of failure. Factors influencing reliable inspection are discussed, and defect detection trials involving round robin tests are described. The development of reliable inspection techniques and the costs of reliability and unreliability are also examined. (U.K.)

  11. Inspection technologies -Development of national safeguards technology-

    International Nuclear Information System (INIS)

    Hong, J. S.; Kim, B. K.; Kwack, E. H.

    1996-12-01

    17 facility regulations prepared by nuclear facilities according to the Ministerial Notices were evaluated. Safeguards inspection activities under Safeguards are described. Safeguards inspection equipments and operation manuals to be used for national inspection are also described. Safeguards report are produced and submitted to MOST by using the computerized nuclear material accounting system at state level. National inspection support system are developed to produce the on-site information for domestic inspection. Planning and establishment of policy for nuclear control of nuclear materials, international cooperation for nuclear control, CTBT, strengthening of international safeguards system, and the supply of PWRs to North Korea are also described. (author). 43 tabs., 39 figs

  12. How to share inspection practices internationally?

    International Nuclear Information System (INIS)

    Zerger, B.

    2009-01-01

    ASN strives to share practices with its foreign counterparts in order to develop and adopt best practice worldwide. With regard to inspection practices, the exchanges are made with AEN, in particular within the context of the Working Group on Inspection Practices (WGIP). As well as being very rewarding, the exchanges sometimes come up against marked differences in terms of inspection organisation and even in the meaning given to the inspections. The WGIP endeavors, however, to make inspection practice recommendations that are as functional and feasible as possible. (author)

  13. Phased Array Ultrasonic Inspection of Titanium Forgings

    International Nuclear Information System (INIS)

    Howard, P.; Klaassen, R.; Kurkcu, N.; Barshinger, J.; Chalek, C.; Nieters, E.; Sun, Zongqi; Fromont, F. de

    2007-01-01

    Aerospace forging inspections typically use multiple, subsurface-focused sound beams in combination with digital C-scan image acquisition and display. Traditionally, forging inspections have been implemented using multiple single element, fixed focused transducers. Recent advances in phased array technology have made it possible to perform an equivalent inspection using a single phased array transducer. General Electric has developed a system to perform titanium forging inspection based on medical phased array technology and advanced image processing techniques. The components of that system and system performance for titanium inspection will be discussed

  14. Boiler inspection manipulator for Torness Power Station

    International Nuclear Information System (INIS)

    Carrey, R.T.A.; Yule, I.Y.; Sibson, S.; Playle, M.J.

    1996-01-01

    The Advanced Gas-cooled Reactors at Torness and Heysham 2 are provided with dedicated access for remote inspection equipment. These in-service inspection (ISI) accesses comprise 12 penetrations above the core for inspection of the above core area and boilers, 12 below core penetrations for inspection of the lower boiler area and access through any of the 8 gas circulator penetrations for inspection of the sub-diagrid area. This paper describes a manipulator which will access the reactor from above the core via any of the 8 peripheral penetrations. (UK)

  15. Towards formalization of inspection using petrinets

    International Nuclear Information System (INIS)

    Javed, M.; Naeem, M.; Bahadur, F.; Wahab, A.

    2014-01-01

    Achieving better quality software has always been a challenge for software developers. Inspection is one of the most efficient techniques, which ensure the quality of software during its development. To the best of our knowledge, current inspection techniques are not realized by any formal approach. In this paper, we propose an inspection technique, which is not only backed by the formal mathematical semantics of Petri nets, but also supports inspecting concurrent processes. We also use a case study of an agent based distributed processing system to demonstrate the inspection of concurrent processes. (author)

  16. Inspection device for buried equipment

    International Nuclear Information System (INIS)

    Hanawa, Jun.

    1994-01-01

    In an inspection device for a buried equipment, a rail is suspended at the upper portion of a vessel of a pit-vessel type pump buried in a plant building floor, and a truck movable vertical in the vessel along the rail, and an ultrasonic wave probe contained in the truck and urged to the vessel by an electromagnet are disposed. In addition, an elevator moving vertically along a shaft is disposed, and an arm having the ultrasonic probe disposed at the end portion and driven by a piston are disposed to the elevator. The ultrasonic wave probe moves vertically together with the truck along the rail in the vessel while being urged to the vessel by the electromagnet to inspect and measure the state at the inner and outer surfaces of the vessel. Further, the length of the arm is controlled so as to set a predetermined distance between the ultrasonic wave probe and the vessel. Subsequently, the elevator is moved vertically along a shaft passing through a shaft hole of a mount, and the shaft is rotated thereby enabling to inspect and measure the state of the inner and outer surfaces of the vessel. (N.H.)

  17. Integration of design and inspection

    Science.gov (United States)

    Simmonds, William H.

    1990-08-01

    Developments in advanced computer integrated manufacturing technology, coupled with the emphasis on Total Quality Management, are exposing needs for new techniques to integrate all functions from design through to support of the delivered product. One critical functional area that must be integrated into design is that embracing the measurement, inspection and test activities necessary for validation of the delivered product. This area is being tackled by a collaborative project supported by the UK Government Department of Trade and Industry. The project is aimed at developing techniques for analysing validation needs and for planning validation methods. Within the project an experimental Computer Aided Validation Expert system (CAVE) is being constructed. This operates with a generalised model of the validation process and helps with all design stages: specification of product requirements; analysis of the assurance provided by a proposed design and method of manufacture; development of the inspection and test strategy; and analysis of feedback data. The kernel of the system is a knowledge base containing knowledge of the manufacturing process capabilities and of the available inspection and test facilities. The CAVE system is being integrated into a real life advanced computer integrated manufacturing facility for demonstration and evaluation.

  18. 2011 annual meeting of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung (DGZfP). NDE in research, development and application

    International Nuclear Information System (INIS)

    2011-01-01

    This CD-ROM proceedings publication contains the papers and posters of the DGZfP annual meeting 2011, at Bremen, Germany, both in full text and as PowerPoint presentations. The following issues were discussed: Radiographic inspection, ultrasonic inspection, computerized tomography, and thermography. Ten papers were recorded as separate entries in the ENERGY database. [de

  19. Post-Closure Inspection Report for Corrective Action Unit 90: Area 2 Bitcutter Containment, Nevada Test Site, Nevada

    International Nuclear Information System (INIS)

    NSTec Environmental Restoration

    2007-01-01

    Corrective Action Unit (CAU) 90, Area 2 Bitcutter Containment, is identified in the ''Federal Facility Agreement and Consent Order'' of 1996. The post-closure requirements for CAU 90 are described in Section VII.B.8.b of the Nevada Test Site ''Resource Conservation and Recovery Act'' Permit for a Hazardous Waste Management Facility Number NEV HW0021, dated November 2005. Post-closure activities consist of the following: Semiannual inspections of the site using inspection checklists; Photographic documentation; Field note documentation; and Preparation and submittal of an annual Post-Closure Inspection Report. This annual report covers the period of July 2006 to June 2007 and consists of a summary of the results of the inspections, copies of the inspection checklists and field notes, maintenance and repair records (if any), photographs, and conclusions and recommendations. The inspection checklists are provided in Appendix A, a copy of the field notes is provided in Appendix B, and copies of photographs taken during the inspections are provided in Appendix C

  20. Post-Closure Inspection Report for Corrective Action Unit 90: Area 2 Bitcutter Containment, Nevada Test Site, Nevada

    International Nuclear Information System (INIS)

    NSTec Environmental Restoration

    2008-01-01

    Corrective Action Unit (CAU) 90, Area 2 Bitcutter Containment, is identified in the Federal Facility Agreement and Consent Order of 1996, as amended February 2008. The post-closure requirements for CAU 90 are described in Section VII.B.8.b of the Nevada Test Site Resource Conservation and Recovery Act Permit for a Hazardous Waste Management Facility Number NEV HW0021, dated November 2005. Post-closure activities consist of the following: (1) Semiannual inspections of the site using inspection checklists; (2) Photographic documentation; (3) Field note documentation; and (4) Preparation and submittal of an annual Post-Closure Inspection Report. This annual report covers the period of July 2007 to June 2008 and consists of a summary of the results of the inspections, copies of the inspection checklists and field notes, maintenance and repair records (if any), photographs, and conclusions and recommendations. The inspection checklists are provided in Appendix A, a copy of the field notes is provided in Appendix B, and copies of photographs taken during the inspections are provided in Appendix C

  1. Ultrasonic inspections of fuel alignment pins

    International Nuclear Information System (INIS)

    Rathgeb, W.; Schmid, R.

    1994-01-01

    As a remedy to the practical problem of defects in fuel alignment pins made of Inconel X750, an inspection technique has been developed which fully meets the requirements of detecting defects. The newly used fuel alignment pins made of austenite are easy to test and therefore satisfy the necessity of further inspections.For the fuel alignment pins of the upper core structure a safe and fast inspection technique was made available. The inspection sensitivity is high and it is possible to give quantitative directions concerning defect orientation and depth. After the required inspections had been concluded in 1989, a total of 18 inspections were carried out in various national and international nuclear power plants in the following years. During this time more than 6000 fuel alignment pines were examined.For the fuel alignment pins the inspection technique provided could increase the understanding of the defect process. This technique contributed to the development of an adaptive and economical repair strategy. ((orig.))

  2. Intelligent Automated Nuclear Fuel Pellet Inspection System

    International Nuclear Information System (INIS)

    Keyvan, S.

    1999-01-01

    At the present time, nuclear pellet inspection is performed manually using naked eyes for judgment and decisionmaking on accepting or rejecting pellets. This current practice of pellet inspection is tedious and subject to inconsistencies and error. Furthermore, unnecessary re-fabrication of pellets is costly and the presence of low quality pellets in a fuel assembly is unacceptable. To improve the quality control in nuclear fuel fabrication plants, an automated pellet inspection system based on advanced techniques is needed. Such a system addresses the following concerns of the current manual inspection method: (1) the reliability of inspection due to typical human errors, (2) radiation exposure to the workers, and (3) speed of inspection and its economical impact. The goal of this research is to develop an automated nuclear fuel pellet inspection system which is based on pellet video (photographic) images and uses artificial intelligence techniques

  3. Radiation practices. Annual report 2002

    International Nuclear Information System (INIS)

    Rantanen, E.

    2003-06-01

    A total of 1820 safety licences granted for the use of radiation in Finland were current at the end of 2002. There were also 2037 undertakings for dental X-ray diagnostics (licencefree). The Safety Licence Register of the Radiation and Nuclear Safety Authority (STUK) listed 14 120 radiation devices and 262 radionuclide laboratories. In 2002, STUK performed 401 inspections of licensed practices and 25 inspections of licence-free dental X-ray practices. Restrictions were ordered on the use of one device. Repairs were ordered in 116 cases and recommended in 55 cases. No remarks were given in 254 cases. Imports of radioactive substances amounted to 110 157 GBq and exports totalled 22 359 GBq. Short-lived radionuclides produced in Finland amounted to 42 487 GBq. The STUK interim storage for radioactive wastes received 65 batches of low-level wastes. A total of 11 190 workers were individually monitored for radiation exposure at 1176 workplaces. Of these workers, some 32% were category A workers and 67% category B workers. In no case were annual dose limits exceeded. The total dose in the use of radiation and nuclear energy recorded in the STUK Dose Register was 6.35 Sv. The mean doses in typical diagnostic X-ray procedures based on phantom measurements were below the reference levels issued by the European Community, the IAEA and STUK. Accuracy of the therapeutic doses underlying good therapeutic results in radiotherapy has remained within acceptable limits, and no excessive doses jeopardizing the safety of therapy have occurred. In the regulatory control of natural radiation, inspection reports requesting performance of radon repairs or measurements of radon concentrations were sent to 145 enterprises. Underground radon inspections were performed in 4 mines and 7 excavation sites. The mean effective dose to aircraft crew caused by cosmic radiation was 1.6 mSv. Ministry of Social Affairs and Health Decree on the Limitation of Public Exposure to Non-Ionizing Radiation

  4. 7 CFR 57.925 - Inspection of imported eggs.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Inspection of imported eggs. 57.925 Section 57.925... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) INSPECTION OF EGGS (EGG PRODUCTS INSPECTION ACT) Regulations Governing the Inspection of Eggs Imports § 57.925 Inspection of...

  5. 46 CFR 107.211 - Original Certificate of Inspection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Original Certificate of Inspection. 107.211 Section 107... INSPECTION AND CERTIFICATION Inspection and Certification § 107.211 Original Certificate of Inspection. (a) The owner or builder of a unit applies for an inspection for an original Certificate of Inspection by...

  6. Annual Report 2010. Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    2010-01-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across six chapters and seven annexes the activities developed by the organism during 2010. The main topic are: institutional issues; regulatory guides and standards; argentinean nuclear regulatory system; quality assurance of the ARN; the institutional communications; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the safeguards and the physical protection; the environmental control; the institutional relations; the training and the public information. Also, this publication have annexes with the following content: the regulatory framework; regulatory documents; inspections to medical, industrial and training installations; measurement and evaluation of the drinking water of Ezeiza; international expert's report on the application of the international standards of radiological protection of the public in the zone of the Ezeiza Atomic Center; ethical code

  7. 1996 Annual report; 1996 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This annual report present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 1996. The activities are developed in 10 chapters and 2 appendices, were are described the activities and the bases of the Argentine Regulatory System. The followings chapters and appendices are: 1.-Evolution of the nuclear regulatory activities in the Argentina since the beginnings in the CNEA. 2.-Regulatory system, laws and regulations. 3.-Institutional relations with national and international organizations. 4. and 5.-Safeguards and inspections of the nuclear installations. 6.-Radiation control of the occupational and public doses. 7.-Radiological emergencies. 8.-Projects and tasks scientific-technological. 9.-Training courses and meetings. 10.-Economic and human recourses. Appendix I.-Regulatory documentation. Appendix II.- Inspections of nuclear installations.

  8. 1999 Annual Report; 1999 Informe Anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This annual report presents information on the main activities carried out by the Nuclear Regulatory Authority (ARN) of Argentina during 1999, on radiation protection and nuclear safety. The work is developed in 9 chapters, 1 summary and 2 appendixes, where a description of the following activities and the bases of the Argentina Regulatory Systems are given: 1. Evolution of the nuclear regulatory activities in Argentina. Organic structures, tasks and budget. 2. Regulatory system, laws, transport of radioactive materials, safety at the management of radioactive wastes, regulatory documents issued. 3. Institutional relations with national and international organizations. 4. Inspection and evaluations of nuclear installations. Safeguards and physical protection. 5. Occupational and environmental surveillance. 6. Radiological emergencies. 7. Scientific and technological activities. Nuclear Regulatory Authority's laboratories. 8. Training, technical information and software development. 9. Radioactive facilities inspections.

  9. Annual Report 2011. Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    2011-01-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across six chapters and seven annexes the activities developed by the organism during 2011. The main topic are: institutional issues; regulatory guides and standards; argentinean nuclear regulatory system; quality assurance of the ARN; the institutional communications; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the safeguards and the physical protection; the environmental control; the institutional relations; the training and the public information. Also, this publication have annexes with the following content: the regulatory framework; regulatory documents; inspections to medical, industrial and training installations; measurement and evaluation of the drinking water of Ezeiza; international expert's report on the application of the international standards of radiological protection of the public in the zone of the Ezeiza Atomic Center; ethical code

  10. Annual Report 2013. Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    2010-01-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across seven parts and eight annexes the activities developed by the organism during 2013. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the environmental monitoring; the occupational surveillance; the training and the public information; improved organizational and budgetary developments. Also, this publication has annexes with the following content: regulatory documents; inspections to medical; presentations of publications from ARN staff; measurement and evaluation of the drinking water of Ezeiza; international expert report on the implementation of international standards on radiation protection in the Ezeiza Atomic Center; Code of Ethics of the Nuclear Regulatory Authority.

  11. Office of Inspector General fiscal year 1996 annual work plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This FY 1996 Office of Inspector General (OIG) Annual Work Plan is a summary and distillation of information contained in annual work plans, and includes audits and inspections that are carried over from FY 1995 as well as audits and inspections scheduled to start during FY 1996. Audits and inspections included in this consolidated OIG Annual Work Plan will be performed by OIG staff. Specialized expertise available through a Certified Public Accounting firm will be used to assist in auditing the Department`s financial statements. As part of the OIG Cooperative Audit Strategy, additional audit coverage of the Department`s programs is provided by internal auditors of the Department`s integrated contractors. Through the Cooperative Audit Strategy, the OIG ensures that the internal auditors satisfy audit standards, provides planning guidance to the internal auditors, coordinates work to avoid duplication, and tracks the work of internal auditors to ensure that needed audits are performed. Applicable portions of the four annual work plans issued for Fiscal Year 1996 by the Deputy/Assistant Inspectors General have been combined to form a major part of this overall OIG Annual Work Plan. Also included are portions of the most recent OIG Semiannual Reports to Congress to give an overview of the OIG`s mission/organization, resource status, and the environment in which the OIG currently operates. The OIG Annual Work Plan also lists ongoing and planned audits and inspections, and it presents investigative statistics which have been previously reported in the two OIG Semiannual Reports to Congress which cover Fiscal Year 1995. Furthermore, included in this work plan are descriptions of several innovations developed by the OIG to streamline its operations and to conserve as much efficiency and economy as possible in a time of resource reductions.

  12. Employing innovative techniques to reduce inspection times

    International Nuclear Information System (INIS)

    Heumueller, R.; Guse, G.; Dirauf, F.; Fischer, E.

    1997-01-01

    Shorter inspection periods mean lower revision costs and less tight revision schedules, but must not detract from the quality of inspection findings. This requirement imposes upon the company performing the inspection the need for top achievements both in quality management and in the use of innovative techniques. Flexible equipment systems and inspection techniques adapted to specific purposes are able to reduce inspection times in many inspection jobs. As part of a complete system designed to reduce inspection times, the new Saphir (Siemens Alok Phased Array Integrated Reliable UT-System) inspection equipment system is the core of most of the recent innovations. Being an integrated inspection equipment system, it is able to handle conventional US probes as well as arrays and phased arrays. It is open for further matching to specific inspection and administrative requirements and developments, and it may be incorporated in the network of an integrated system with a database. A technological leap in probe design in the past few years has allowed controllable wave fields to be generated which are in no way inferior to those of conventional probes with fixed angles of incidence. In this way, a number of inspection techniques can be implemented with a single probe. This reduces inspection times, setup and retooling times, and doses. Typical examples already used in practice are the LLT (longitudinal-longitudinal-transverse waves) technique and the integration of inspections for longitudinal and transverse defects in a single run. In the near future, surfaces with complicated curvatures will be inspected by novel modular robot systems consisting of individual modules of linear axes and rotational axes. (orig.) [de

  13. Inspection surveys of x-ray inspection systems: results of five years and implications on future management of radiation risks

    International Nuclear Information System (INIS)

    Maharaj, H.P.

    1999-01-01

    Until the mid-1980s, federal inspectors performed radiation surveys annually on individual x-ray inspection systems which were operated for security screening purposes in federal facilities nationwide, and problems identified were corrected. The surveys were undertaken because of perceived high radiation risks and a need to ensure worker and public external exposures were minimized. The x-ray inspection systems are federally regulated under the Radiation Emitting Devices (RED) Act and, initially they were assessed by model type against the design, construction and performance criteria specified in the applicable RED regulations (Schedule II, Part IV) and were found compliant. A subsequent study not only demonstrated a much lower radiation risk attributed to a combination of technological advances in x-ray system design with narrow primary beams, high efficiency detectors and image processing capability, but also stressed the need for proper equipment maintenance and continued education of operators and maintenance personnel. Survey frequency was thus reduced to once every 2-3 years in accordance with a 1993 federal operational standard (Safety Code 29). The radiation protection principles in Safety Code 29 are similar to those of the 1996 International Atomic Energy Agency (IAEA) Basic Safety Standards for the protection against ionizing radiation and the safety of radiation sources. The purpose of this study was to assess inspection-survey data from 1993 through 1997 to elicit guidance toward the future management of radiation risks associated with the operation of such x-ray systems. (author)

  14. Developing the information management system for safeguards national inspection

    International Nuclear Information System (INIS)

    Park, S. J.; Jeon, I.; Park, W. S.; Min, K. S.

    2003-01-01

    The inspection information management system for safeguards national inspection is aimed to do the national safeguards inspection with efficiency, and to decrease the inspector's load to write inspection report by systematizing the inspection jobs and sharing the inspection data. National safeguards inspection is consisted two large jobs. The first is the national safeguards supporting job of managing to support the national inspection mission. The other is the writing a national inspection report after completing the national inspection. Before the developing of inspection information management system, the official tools(spread sheet, word processor) are usually used. But there is problem to share the data, to produce the statistics data. To solve the these problem, we developed the inspection information management system that process the job from initial to final inspection work, and opened user education. This paper explain the procedure of developing the inspection information management system for safeguards national inspection

  15. Developing the information management system for safeguards national inspection

    Energy Technology Data Exchange (ETDEWEB)

    Park, S. J.; Jeon, I.; Park, W. S.; Min, K. S. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    The inspection information management system for safeguards national inspection is aimed to do the national safeguards inspection with efficiency, and to decrease the inspector's load to write inspection report by systematizing the inspection jobs and sharing the inspection data. National safeguards inspection is consisted two large jobs. The first is the national safeguards supporting job of managing to support the national inspection mission. The other is the writing a national inspection report after completing the national inspection. Before the developing of inspection information management system, the official tools(spread sheet, word processor) are usually used. But there is problem to share the data, to produce the statistics data. To solve the these problem, we developed the inspection information management system that process the job from initial to final inspection work, and opened user education. This paper explain the procedure of developing the inspection information management system for safeguards national inspection.

  16. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2013

    Energy Technology Data Exchange (ETDEWEB)

    Silvas, A. J.

    2014-03-03

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2013 and includes inspection and repair activities completed at the following CAUs: • CAU 400: Bomblet Pit and Five Points Landfill (TTR) • CAU 407: Roller Coaster RadSafe Area (TTR) • CAU 424: Area 3 Landfill Complexes (TTR) • CAU 453: Area 9 UXO Landfill (TTR) • CAU 487: Thunderwell Site (TTR) Inspections were conducted according to the post-closure plans in the approved Closure Reports and subsequent correspondence with the Nevada Division of Environmental Protection. The post-closure inspection plans and subsequent correspondence modifying the requirements for each CAU are included in Appendix B. The inspection checklists are included in Appendix C. Field notes are included in Appendix D. Photographs taken during inspections are included in Appendix E. The annual post-closure inspections were conducted on May 14, 2013. Maintenance was performed at CAU 400, CAU 424, and CAU 453. At CAU 400, animal burrows were backfilled. At CAU 424, erosion repairs were completed at Landfill Cell A3-3, subsidence was repaired at Landfill Cell A3-4, and additional lava rock was placed in high-traffic areas to mark the locations of the surface grade monuments at Landfill Cell A3-3 and Landfill Cell A3-8. At CAU 453, two areas of subsidence were repaired and animal burrows were backfilled. Vegetation monitoring was performed at the CAU 400 Five Points Landfill and CAU 407 in June 2013. The vegetation monitoring report is included in Appendix F.

  17. Assessing communication skills of clinical call handlers working at an out-of-hours centre: development of the RICE rating scale.

    Science.gov (United States)

    Derkx, Hay P; Rethans, Jan-Joost E; Knottnerus, J André; Ram, Paul M

    2007-05-01

    Out-of-hours centres provide telephone support to patients with medical problems. In most of these centres specially-trained nurses handle incoming telephone calls. They assess patients' needs, the degree of urgency, and determine the level of care required. Assessment of the medical problem and the quality of 'care-by-phone' depend on the medical and communication skills of the call handlers. To develop a valid, reliable, and practical rating scale to evaluate the communication skills of call handlers working at an out-of-hours centre and to improve quality of communication. Qualitative study with focus groups followed by validation of the rating scale and measurement of reliability (internal consistency). Out-of-hours centres in the Netherlands. A focus group developed the rating scale. Experts with experience in training and evaluating communication skills of medical students and GPs commented on the scale to ensure content validity. The reliability of the rating scale was tested in a pilot in which ten specially-trained assessors scored six telephone calls each. The scale, known as the RICE rating scale, has 17 items divided over four different phases of the telephone consultation: Reason for calling; Information gathering; Conclusion; and Evaluation (RICE). Content validity of the scale was assessed by two experts. Reliability of the scale tested in the pilot was 0.73 (Cronbach's alpha). Establishing a rating scale to assess the communication skills of call handlers which meets common scientific demands, such as content validity and reliability, proved successful. This instrument can be used to give feedback to call handlers.

  18. A Study of impact of Education on Awareness, Personal Hygiene and Practices of food handlers of a Tertiary Care Hospital in Kashmir, India

    OpenAIRE

    Hina; Wani MA; Rehana K; Jan Farooq; Pandita K.K

    2013-01-01

    Background Each year 9.4 million people suffer from food borne diseases throughout the world; everyday cases related to food borne diseases are recorded in all countries from the most to the least developed ones. A major risk of food contamination lies with the food handlers.Several food borne disease outbreaks have been reported to have been associated with poor personal hygiene of people handling food stuffs. Method A questionnaire was structured for the purpose of data collection to find ...

  19. A Study of impact of Education onAwareness, Personal Hygiene and Practices of food handlers of a Tertiary Care Hospital in Kashmir, India

    OpenAIRE

    Pandita K.K

    2013-01-01

    Background Each year 9.4 million people suffer from food borne diseases throughout the world; everyday cases related to food borne diseases are recorded in all countries from the most to the least developed ones. A major risk of food contamination lies with the food handlers.Several food borne disease outbreaks have been reported to have been associated with poor personal hygiene of people handling food stuffs. Method A questionnaire was structured for the purpose of data collection to fin...

  20. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, For Calendar Year 2010

    International Nuclear Information System (INIS)

    2011-01-01

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2010 and includes inspection and repair activities completed at the following seven CAUs: (1) CAU 400: Bomblet Pit and Five Points Landfill (TTR); (2) CAU 407: Roller Coaster RadSafe Area (TTR); (3) CAU 424: Area 3 Landfill Complexes (TTR); (4) CAU 426: Cactus Spring Waste Trenches (TTR); (5) CAU 453: Area 9 UXO Landfill (TTR); (6) CAU 484: Surface Debris, Waste Sites, and Burn Area (TTR); and (7) CAU 487: Thunderwell Site (TTR).

  1. Post-Closure Inspection Report for the Tonopah Test Range, Nevada, for Calendar Year 2012

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Restoration

    2013-01-28

    This report provides the results of the annual post-closure inspections conducted at the closed Corrective Action Units (CAUs) located on the Tonopah Test Range (TTR), Nevada. This report covers calendar year 2012 and includes inspection and repair activities completed at the following CAUs: · CAU 400: Bomblet Pit and Five Points Landfill (TTR) · CAU 407: Roller Coaster RadSafe Area (TTR) · CAU 424: Area 3 Landfill Complexes (TTR) · CAU 453: Area 9 UXO Landfill (TTR) · CAU 487: Thunderwell Site (TTR)

  2. Bridging of inspection with corrosion management

    International Nuclear Information System (INIS)

    Zamaluddin Ali; Mohd Hawari Hassan; Rohana Jaafar

    2009-01-01

    Formerly, Inspection and Corrosion Engineers have less interaction and sharing of information to each other even they are working in the same plant or organization. Inspection finding either from visual inspection or NDT techniques rarely shared with corrosion engineers. Similarly corrosion engineers rarely discussed their corrosion prediction and potential damage mechanism with inspection engineers. A demanding request of more holistic plant safety and asset integrity promoted the introduction and implementation of Risk Based Inspection (RBI). RBI analysis demands the input mainly from both disciplines i.e. Inspection and Corrosion Engineers. Most of RBI methodologies are once-off analysis approach which also promoted once-off interaction between Inspection and Corrosion Engineers. PETRONAS has developed a methodology with supporting software, integrating both Inspection and Corrosion disciplines. PETRONAS Risk Based Inspection (PRBI) is intended to promote continuous integration of Inspection and Corrosion management of the plant through out the whole life cycle starting from the design stage to fabrication, operation and decommissions stage. (author)

  3. Culture versus PCR for Salmonella Species Identification in Some Dairy Products and Dairy Handlers with Special Concern to Its Zoonotic Importance.

    Science.gov (United States)

    Gwida, Mayada M; Al-Ashmawy, Maha A M

    2014-01-01

    A total of 200 samples of milk and dairy products as well as 120 samples of dairy handlers were randomly collected from different dairy farms and supermarkets in Dakahlia Governorate, Egypt. The conventional cultural and serotyping methods for detection of Salmonella in dairy products were applied and the results were compared with those obtained by molecular screening assay using (ttr sequence). The obtained results revealed that 21% of milk and dairy products (42/200) were positive for Salmonella species using enrichment culture-based PCR method, while 12% of different dairy samples (24/200) were found to be positive for Salmonella species by using the conventional culture methods. Two stool specimens out of 40 apparently healthy dairy handlers were positive by the PCR method. Serotyping of Salmonella isolates revealed that 58.3% (14/24) from different dairy products were contaminated with Salmonella Typhimurium. We conclude that the enrichment culture-based PCR assay has high sensitivity and specificity for detection of Salmonella species in dairy products and handlers. High incidence of Salmonella Typhimurium in the examined dairy samples highlights the important role played by milk and dairy products as a vehicle in disease prevalence. Great effort should be applied for reducing foodborne risk for consumers.

  4. Wafer plane inspection for advanced reticle defects

    Science.gov (United States)

    Nagpal, Rajesh; Ghadiali, Firoz; Kim, Jun; Huang, Tracy; Pang, Song

    2008-05-01

    Readiness of new mask defect inspection technology is one of the key enablers for insertion & transition of the next generation technology from development into production. High volume production in mask shops and wafer fabs demands a reticle inspection system with superior sensitivity complemented by a low false defect rate to ensure fast turnaround of reticle repair and defect disposition (W. Chou et al 2007). Wafer Plane Inspection (WPI) is a novel approach to mask defect inspection, complementing the high resolution inspection capabilities of the TeraScanHR defect inspection system. WPI is accomplished by using the high resolution mask images to construct a physical mask model (D. Pettibone et al 1999). This mask model is then used to create the mask image in the wafer aerial plane. A threshold model is applied to enhance the inspectability of printing defects. WPI can eliminate the mask restrictions imposed on OPC solutions by inspection tool limitations in the past. Historically, minimum image restrictions were required to avoid nuisance inspection stops and/or subsequent loss of sensitivity to defects. WPI has the potential to eliminate these limitations by moving the mask defect inspections to the wafer plane. This paper outlines Wafer Plane Inspection technology, and explores the application of this technology to advanced reticle inspection. A total of twelve representative critical layers were inspected using WPI die-to-die mode. The results from scanning these advanced reticles have shown that applying WPI with a pixel size of 90nm (WPI P90) captures all the defects of interest (DOI) with low false defect detection rates. In validating CD predictions, the delta CDs from WPI are compared against Aerial Imaging Measurement System (AIMS), where a good correlation is established between WPI and AIMSTM.

  5. Turbine rotors inspection problems associated with independent inspection

    International Nuclear Information System (INIS)

    Delgado, J.O.; Martinez, C.A.

    1990-01-01

    As is well know, the serious problems affecting turbine-generator set rotors and moving parts, such as stress-corrosion cracking and/or the phenomena of creep/fatigue, have led the companies possessing these components to make considerable investments in terms of economy and human resources with a view to finding means for control and solutions. The fact that certain countries, such as Spain, have a limited number of fossil-fuelled and/or nuclear plants, with different suppliers and designs, means that the control and solving of such problems necessarily imply significant technological dependence and, consequently, that the resources used imply high associated costs that is most cases have to be paid in overseas currencies. This fact led several Spanish plant owners to propose that Tecnatom carry out an R ampersand D project aimed at developing and integral turbine rotor inspection and evaluation system designed to reduce technological dependence in this area through the application of in-house technology. This project identified as PC-850059 has been subsidized by the Spanish authorities through The Interministerial Commission of Science ampersand Technology. This article describes the developments achieved and the difficulties inherent to independent turbine rotor inspection and evaluation

  6. Mobile inspection and repackaging unit

    International Nuclear Information System (INIS)

    Whitney, G.A.; Roberts, R.J.

    1992-12-01

    Storage of large volumes of radioactive mixed waste (RMW) and transuranic waste generated over the past 20 years at the Hanford Site has resulted in various waste management challenges. Presently disposal capacity for this waste type does not exist. The waste wail be stored until processing facilities can be completed to provide treatment and final disposed. Because of the complexity of these wastes, special projects have been initiated to properly manage them. This paper addresses one such project. The goal of this project is to develop a mobile solid waste inspection and repackaging facility for solid RMW and transuranic waste

  7. Instant Adobe Edge Inspect starter

    CERN Document Server

    Khan, Joseph

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This easy-to-understand Starter guide will get you up to speed with Adobe Edge Inspect quickly and with little effort.This book is for frontend web developers and designers who are developing and testing web applications targeted for mobile browsers. It's assumed that you have a basic understanding of creating web applications using HTML, CSS, and JavaScript, as well as being familiar with running web pages from local HTTP servers. Readers are a

  8. Nuclear Regulatory Commission: 1981 annual report

    International Nuclear Information System (INIS)

    1981-01-01

    This seventh annual report of the US Nuclear Regulatory Commission covers major actions, events and planning that occurred during fiscal year 1981, with some coverage of later events, where appropriate. Chapters of the report address the agency's various functions or areas of activity: regulating nuclear power plants; evaluating reactor operating experience; licensing nuclear materials and their transportation; safeguarding nuclear plants and materials; managing nuclear wastes; inspection and enforcement; cooperation with state governments; international activities; research and standards development; hearings; decisions and litigation; and administrative and public communications matters. Each chapter presents a detailed review of program accomplishments during the report period, fiscal year 1981

  9. Annual Report 2008. Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    2009-01-01

    The present Annual Report of Activities of the Nuclear Regulatory Authority (ARN), prepared regularly from the creation as independent institution, describes across four parts and seven annexes the activities developed by the organism during 2008. The main topic are: the organization and the activity of the ARN; the regulatory standards; the licensing and inspection of nuclear power plants and critical facilities; the emergency systems; the occupational surveillance; the environmental monitoring; improved organizational and budgetary developments. Also, this publication have annexes with the following content: regulatory documents; regulatory guides; measurement and evaluation of the drinking water of Ezeiza.

  10. 2000 Annual report; 2000 Informe anual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (NRA) of the Argentina during 2000. The following activities and developed topic in this report describe: the Argentine regulatory system; the evolution of the nuclear regulatory activities in the Argentina since the beginnings in the National Atomic Energy Commission (NAEC) of Argentina; the nuclear regulatory laws and standards; the safeguards and inspection of the nuclear facilities and nuclear power plants; the radiological emergency systems; the environmental monitoring; the institutional relations with national and international organizations; the biological and physics dosimetry; the training courses and meetings; the economic and human recourses.

  11. System Enhancements for Mechanical Inspection Processes

    Science.gov (United States)

    Hawkins, Myers IV

    2011-01-01

    Quality inspection of parts is a major component to any project that requires hardware implementation. Keeping track of all of the inspection jobs is essential to having a smooth running process. By using HTML, the programming language ColdFusion, and the MySQL database, I created a web-based job management system for the 170 Mechanical Inspection Group that will replace the Microsoft Access based management system. This will improve the ways inspectors and the people awaiting inspection view and keep track of hardware as it is in the inspection process. In the end, the management system should be able to insert jobs into a queue, place jobs in and out of a bonded state, pre-release bonded jobs, and close out inspection jobs.

  12. System for inspection of stacked cargo containers

    Science.gov (United States)

    Derenzo, Stephen [Pinole, CA

    2011-08-16

    The present invention relates to a system for inspection of stacked cargo containers. One embodiment of the invention generally comprises a plurality of stacked cargo containers arranged in rows or tiers, each container having a top, a bottom a first side, a second side, a front end, and a back end; a plurality of spacers arranged in rows or tiers; one or more mobile inspection devices for inspecting the cargo containers, wherein the one or more inspection devices are removeably disposed within the spacers, the inspection means configured to move through the spacers to detect radiation within the containers. The invented system can also be configured to inspect the cargo containers for a variety of other potentially hazardous materials including but not limited to explosive and chemical threats.

  13. Sources of Calicivirus contamination in foodborne outbreaks in Denmark, 2005-2011--the role of the asymptomatic food handler.

    Science.gov (United States)

    Franck, Kristina T; Lisby, Morten; Fonager, Jannik; Schultz, Anna C; Böttiger, Blenda; Villif, Annette; Absalonsen, Helle; Ethelberg, Steen

    2015-02-15

    Norovirus (NoV) is the predominant cause of foodborne disease outbreaks. Virus contamination may occur during all steps of food processing, from production to preparation and serving. The relative importance of these different routes of contamination is unknown. The purpose of this study was to estimate the proportions of outbreaks caused by asymptomatic and symptomatic food handlers (FHs). Reports of foodborne NoV and sapovirus outbreaks (n=191) that occurred over a 7-year period were extracted, reviewed, and categorized according to the available evidence for source of contamination. In 64 (34%) of the outbreaks, contamination from FHs took place during preparation or serving of food. In the majority of these outbreaks (n=41; 64%), the FHs were asymptomatic during food handling. Some had been in contact with ill household members before handling the food and remained asymptomatic; others developed symptoms shortly after or were post-symptomatic. In 51 (27%) of the outbreaks, contamination occurred during production of the food, and in 55 (29%) of the outbreaks, contamination had supposedly occurred after serving a guest at a self-serve buffet. Guidelines regarding exclusion of FHs where household members suffer from gastroenteritis could limit the number of outbreaks. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  14. Molecular differentiation of Entamoeba histolytica and Entamoeba dispar from Tunisian food handlers with amoeba infection initially diagnosed by microscopy

    Directory of Open Access Journals (Sweden)

    Ben Ayed S.

    2008-03-01

    Full Text Available The purpose of the study was to obtain more reliable epidemiological data concerning Entamoeba (E. histolytica infection in Tunisian food handlers using established molecular tools able to differentiate E. histolytica from E. dispar. From 2002 to 2005, 4,266 fresh stools specimens received in the setting of the National program of food handlers’ control were analysed by optical microscopy. Twelve (2.8 ‰ were positive for the presence of four nuclei cysts identified as E. histolytica/E. dispar. Extraction of DNA from the 12 samples, followed by specific amplifications of E. histolytica and E. dispar SSU rDNA, showed that 11 samples (92% were positive for E. dispar and negative for E. histolytica. Sequencing analysis of 8 PCR products permitted to verify the results obtained with conventional PCR. The remaining sample was negative by PCR amplifying E. histolytica DNA or E. dispar DNA specifically, although it did not show any inhibition. It probably contains protozoan cysts genetically distinct from these two species but morphological similar. Estimation of relative proportions between E. histolytica and E. dispar in cyst carriers showed that all explored individuals harboured the non pathogenic E. dispar strains. This result highlights the need of use in this population of complementary tests that allow specific diagnosis and obviate unnecessary chemotherapy.

  15. Calculation of frequency of optimal inspection in non-notice inspection game

    International Nuclear Information System (INIS)

    Kumakura, Shinichi; Gotoh, Yoshiki; Kikuchi, Masahiro

    2011-01-01

    We consider a non-notice inspection game between an inspection party, who verifies absence of diversion of nuclear materials and misuse of nuclear facility, and a facility operator, who tries them in a nuclear facility. In the game, the payoff for each player, inspection party and facility operator, is composed of various elements (parameters) such as facility type, a type of nuclear material, number of inspection and others. Their payoffs consist of profits and costs (minus profit). Because of random nature by non-notice inspection, its deterrence effect and inspection number could have the potential to affect their payoffs. In this paper, their payoffs taking into consideration of the inspection environment above are represented as a function of inspection number. Then, the optimal number is calculated from a condition on their payoffs for number of inspection. Comparable statics analysis is performed in order to observe the change of inspection number which is equilibrium point by changing these parameters including deterrence effect, because the number derived depends on each parameter within the inspection environment. Based on the analysis results, necessary conditions to reduce the inspection number keeping inspection effect are pointed out. (author)

  16. Ultrasonic inspection of austenitic welds

    International Nuclear Information System (INIS)

    Baikie, B.L.; Wagg, A.R.; Whittle, M.J.; Yapp, D.

    1976-01-01

    Optical and X-ray metallography combined with ultrasonic testing by compression waves was used for inspection of stainless steel weld metal produced by three different welding techniques. X-ray diffraction showed that each weld possessed a characteristic fibre textured structure which was shown by optical microscopy to be parallel to columnar grain boundaries. Metallographic evidence suggested that the development of fibre texture is due to the mechanism of competitive growth. From observations made as a result of optical metallographic examination the orientation of the fibre axis could be predicted if the weld geometry and welding procedure were known. Ultrasonic velocity and attenuation measurements as a continuous function of grain orientation, made on cylinders machined from weld samples, showed that attenuation was strongly orientation dependent. It was concluded that the sensitivity of ultrasonic inspection to small defects is unlikely to be as high for austenitic welds as for ferritic even when transmission is improved by modifying the welding procedure to improve the ultrasonic transmission. (U.K.)

  17. China's coal export and inspection

    International Nuclear Information System (INIS)

    Xiaodong Li

    1993-01-01

    With the development of world's business and trade, coal has become a large part of the import and export goods in the international market. The total amount of coal trade has risen a lot. China is rich in coal resources. According to the estimate made by some experts, the reserve which has been explored recently could be exploited hundreds of years. China's output of raw coal has risen a lot during the past forty years. China coal industry has developed rapidly since the 1980s. It is possible for China to become a big coal export country since it has rich resources and increasing output. The paper suggests four steps which must be taken to expand coal exports in China: improve the level of management and administration of coal mines so as to raise the economic benefit; the follow-up production capacity of the present mines must be enhanced rapidly; step up construction of new large-scale mines; and China's coal washing capacity must be improved speedily since the low capacity has seriously influenced the improvement of coal quality. The paper describes the inspection bureaus and companies that have developed to perform inspection of exports in order to guarantee the quality of export coal

  18. Visual inspection. Better than your eyes

    International Nuclear Information System (INIS)

    Jakobs, N.; Baumgartl, R.

    2005-01-01

    Ongoing improvements in the development of camera technologies and manipulator techniques permit an enhanced performance of inspection tasks in nuclear services. In areas of reduced dose rate it's possible to use small size high resolution CCD cameras instead of tube cameras. Underwater inspections may be performed by submarine instead of rigid manipulator systems. This allows the enlargement of inspection areas and the performance at reduced time and personnel dose rate. (author)

  19. Nuclear power plant pressure vessels. Inservice inspections

    International Nuclear Information System (INIS)

    1995-01-01

    The requirements for the planning and reporting of inservice inspections of nuclear power plant pressure vessels are presented. The guide specifically applies to inservice inspections of Safety class 1 and 2 nuclear power plant pressure vessels, piping, pumps and valves plus their supports and reactor pressure vessel internals by non- destructive examination methods (NDE). Inservice inspections according to the Pressure Vessel Degree (549/73) are discussed separately in the guide YVL 3.0. (4 refs.)

  20. Periodic inspections of the primary system

    International Nuclear Information System (INIS)

    Dufour, L.B.

    1978-01-01

    An impression is given of the inspection techniques, preparations and background for periodic examinations of the primary system of the Dodewaard Nuclear Reactor over the past 10 years. Unfortunately reliable integral inspection techniques to enable 'listening-in' to developing faults, are not yet available. Until they are, inspections will continue to be executed from a distance using different continuous methods, often under water and with a shortage of space and in the presence of ionising radiations. (C.F.)

  1. In-service inspection and periodic testing

    International Nuclear Information System (INIS)

    Eisele, H.; Meyer, F.A.; Zipser, R.R.

    1981-01-01

    In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. Below, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor/PWR/ or on a boiling-water reactor/BWR/) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

  2. Modelling inspection policies for building maintenance.

    Science.gov (United States)

    Christer, A H

    1982-08-01

    A method of assessing the potential of an inspection maintenance policy as opposed to an existing breakdown maintenance policy for a building complex is developed. The method is based upon information likely to be available and specific subjective assessments which could be made available. Estimates of the expected number of defects identified at an inspection and the consequential cost saving are presented as functions of the inspection frequency.

  3. In-service inspection and periodic testing

    International Nuclear Information System (INIS)

    Eisele, H.; Meyer, F.A.; Zipser, R.R.

    1980-01-01

    In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. In the present paper, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor/PWR/ or on a boiling-water reactor/BWR/) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

  4. Flexible Visual Quality Inspection in Discrete Manufacturing

    OpenAIRE

    Petković, Tomislav; Jurić, Darko; Lončarić, Sven

    2013-01-01

    Most visual quality inspections in discrete manufacturing are composed of length, surface, angle or intensity measurements. Those are implemented as end-user configurable inspection tools that should not require an image processing expert to set up. Currently available software solutions providing such capability use a flowchart based programming environment, but do not fully address an inspection flowchart robustness and can require a redefinition of the flowchart if a small variation is int...

  5. AECL experience in fuel channel inspection

    Energy Technology Data Exchange (ETDEWEB)

    Van Drunen, G. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Gunn, R. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada); Mayo, W.R. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Scott, D.A. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada)

    1999-06-01

    Inspection of CANDU fuel channels (FC) is performed to ensure safe and economic reactor operation. CANDU reactor FCs have features that make them a unique non-destructive testing (NDT) challenge. The thin, 4 mm pressure-tube wall means flaws down to about 0.1 mm deep must be reliably detected and characterized. This is one to two orders of magnitude smaller than is usually considered of significant concern for steel piping and pressure vessels. A second unique feature is that inspection sensors must operate in the reactor core--often within 20 cm of highly radioactive fuel. Work on inspection of CANDU reactor FCs at AECL dates back over three decades. In that time, AECL staff have provided equipment and conducted or supervised in-service inspections in about 250 FCs, in addition to over 8000 pre-service FCs. These inspections took place at every existing CANDU reactor except those in India and Romania. Early FC inspections focussed on measurement of changes in dimensions (gauging) resulting from exposure to a combination of neutrons, stress and elevated temperature. Expansion of inspection activities to include volumetric inspection (for flaws) started in the mid-1970s with the discovery of delayed hydride cracking in Pickering 3 and 4 rolled joints. Recognition of other types of flaw mechanisms in the 1980s led to further expansion in both pre-service and in-service inspections. These growing requirements, to meet regulatory as well as economic needs, led to the development of a wide spectrum of inspection technology that now includes tests for hydrogen concentration, structural integrity of core components, flaws, and dimensional change. This paper reviews current CANDU reactor FC inspection requirements. The equipment and techniques developed to satisfy these requirements are also described. The paper concludes with a discussion of work in progress in AECL aimed at providing state-of-the-art FC inspection services. (author)

  6. User interface inspection methods a user-centered design method

    CERN Document Server

    Wilson, Chauncey

    2014-01-01

    User Interface Inspection Methods succinctly covers five inspection methods: heuristic evaluation, perspective-based user interface inspection, cognitive walkthrough, pluralistic walkthrough, and formal usability inspections. Heuristic evaluation is perhaps the best-known inspection method, requiring a group of evaluators to review a product against a set of general principles. The perspective-based user interface inspection is based on the principle that different perspectives will find different problems in a user interface. In the related persona-based inspection, colleagues assume the

  7. 10 CFR 76.121 - Inspections.

    Science.gov (United States)

    2010-01-01

    ... shall provide rent-free office space for the exclusive use of Commission inspection personnel upon... provided regular plant employees, following proper identification and compliance with applicable access...

  8. Periodic and in-service inspection programs

    International Nuclear Information System (INIS)

    Dinu, M.

    2000-01-01

    Periodic and in-service inspection programs for Cernavoda NPP consists of periodic inspections of CANDU NPP components CSAN N-285.4 and CSAN N-285.4, in-service inspections and repair and modifications general inspection. Periodic inspection program document (PIPD) determines the systems and components subject to inspection, the category of the inspection, techniques, areas and other details.The current status of the inspection programs is presented, including containment , erosion/corrosion, pressure vessel support and snubbers, main steam lines inspection programs. Qualification program in Cernavoda NPP involves equipment qualification in the on-site laboratory, yearly certification, special equipment qualification in the National Institute of Metrology. All procedures are approved by the ISCIR (regulatory body for pressure vessel and lifting equipment) and CNCAN (National Commission on Nuclear Activities Control). Qualification of the personnel is performed according to the ISCIR Technical prescription CR 11/82 for up to 3 year period. Final qualification and licensing is performed by CNCAN

  9. ENIQ: European Network for Inspection Qualification

    International Nuclear Information System (INIS)

    Champigny, F.; Crutzen, S.; Lemaitre, P.

    1995-01-01

    Many countries are currently considering their own approach to inspection qualification and are carefully assessing experience to date. ENIQ, which stands for European Network for Inspection Qualification, groups the major part of the utilities in Western Europe. The general objective of ENIQ is to coordinate and manage at European level expertise and resources for the assessment and qualification of NDE inspection techniques and procedures, primarily for nuclear components. Also non-nuclear heavy duty components will be considered. Within ENIQ there is a growing consensus of opinion on the general principles of a European approach towards inspection qualification. In this paper the main activities, organization and actual status of ENIQ will be discussed

  10. Non-Destructive Inspection Lab (NDI)

    Data.gov (United States)

    Federal Laboratory Consortium — The NDI specializes in applied research, development and performance of nondestructive inspection procedures (flourescent penetrant, magnetic particle, ultrasonics,...

  11. Development of an automatic reactor inspection system

    International Nuclear Information System (INIS)

    Kim, Jae Hee; Eom, Heung Seop; Lee, Jae Cheol; Choi, Yoo Raek; Moon, Soon Seung

    2002-02-01

    Using recent technologies on a mobile robot computer science, we developed an automatic inspection system for weld lines of the reactor vessel. The ultrasonic inspection of the reactor pressure vessel is currently performed by commercialized robot manipulators. Since, however, the conventional fixed type robot manipulator is very huge, heavy and expensive, it needs long inspection time and is hard to handle and maintain. In order to resolve these problems, we developed a new automatic inspection system using a small mobile robot crawling on the vertical wall of the reactor vessel. According to our conceptual design, we developed the reactor inspection system including an underwater inspection robot, a laser position control subsystem, an ultrasonic data acquisition/analysis subsystem and a main control subsystem. We successfully carried out underwater experiments on the reactor vessel mockup, and real reactor ready for Ulchine nuclear power plant unit 6 at Dusan Heavy Industry in Korea. After this project, we have a plan to commercialize our inspection system. Using this system, we can expect much reduction of the inspection time, performance enhancement, automatic management of inspection history, etc. In the economic point of view, we can also expect import substitution more than 4 million dollars. The established essential technologies for intelligent control and automation are expected to be synthetically applied to the automation of similar systems in nuclear power plants

  12. OSE inspection of computer security: Review

    International Nuclear Information System (INIS)

    Jaehne, E.M.

    1987-01-01

    The inspection process within the Department of Energy (DOE) serves the function of analyzing and reporting on the performance of security measures and controls in specific areas at sites throughout DOE. Three aspects of this process are discussed based on experience in computer security: Policy basis of performance inspections; Role and form of standards and criteria in inspections; and Conducting an inspection using the standards and criteria. Inspections are based on DOE and other applicable policy in each area. These policy statements have a compliance orientation in which the paper trail is often more clearly discernible than the security intention. The relationship of policy to performance inspections is discussed. To facilitate bridging the gap between the paper trail and the security intention defined by policy, standards and criteria were developed in each area. The consensus process and structure of the resulting product for computer security are discussed. Standards and criteria are inspection tools that support the site in preparing for an inspection and the inspector in conducting one. They form a systematic approach that facilitates consistency in the analysis and reporting of inspection results. Experience using the computer security standards and criteria is discussed

  13. Robotic inspection technology-process an toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Hermes, Markus [ROSEN Group (United States). R and D Dept.

    2005-07-01

    Pipeline deterioration grows progressively with ultimate aging of pipeline systems (on-plot and cross country). This includes both, very localized corrosion as well as increasing failure probability due to fatigue cracking. Limiting regular inspecting activities to the 'scrapable' part of the pipelines only, will ultimately result into a pipeline system with questionable integrity. The confidence level in the integrity of these systems will drop below acceptance levels. Inspection of presently un-inspectable sections of the pipeline system becomes a must. This paper provides information on ROSEN's progress on the 'robotic inspection technology' project. The robotic inspection concept developed by ROSEN is based on a modular toolbox principle. This is mandatory. A universal 'all purpose' robot would not be reliable and efficient in resolving the postulated inspection task. A preparatory Quality Function Deployment (QFD) analysis is performed prior to the decision about the adequate robotic solution. This enhances the serviceability and efficiency of the provided technology. The word 'robotic' can be understood in its full meaning of Recognition - Strategy - Motion - Control. Cooperation of different individual systems with an established communication, e.g. utilizing Bluetooth technology, support the robustness of the ROSEN robotic inspection approach. Beside the navigation strategy, the inspection strategy is also part of the QFD process. Multiple inspection technologies combined on a single carrier or distributed across interacting container must be selected with a clear vision of the particular goal. (author)

  14. Quality assurance for IAEA inspection planning

    International Nuclear Information System (INIS)

    Markin, J.T.

    1986-01-01

    Under the provisions of the Treaty on Nonproliferation of Nuclear Weapons and other agreements with states, the International Atomic Energy Agency (IAEA) conducts inspections at nuclear facilities to confirm that their operation is consistent with the peaceful use of nuclear material. The Department of Safeguards at the IAEA is considering a quality assurance program for activities related to the planning of these facility inspections. In this report, we summarize recent work in writing standards for planning inspections at the types of facilities inspected by the IAEA. The standards specify the sequence of steps in planning inspections, which are: (1) administrative functions, such as arrangements for visas and travel, and communications with the state to confirm facility operating schedules and the state's acceptance of the assigned inspectors; (2) technical functions including a specification of the required inspection activities, determination of personnel and equipment resources, and a schedule for implementing the inspection activities at the facility; and (3) management functions, such as pre- and post-inspection briefings, where the planned and implemented inspection activities are reviewed

  15. NRC program of inspection and enforcement

    International Nuclear Information System (INIS)

    LeDoux, J.C.; Rehfuss, C.

    1978-01-01

    The Nuclear Regulatory Commission (NRC) regulates civilian uses of nuclear materials to ensure the protection of the public health and safety and the environment. The Office of Inspection and Enforcement (IE) develops and implements the inspection, investigation, and enforcement programs for the NRC. The IE conducts inspection programs for reactors under construction and in operation, nuclear industry vendors, fuel facilities and users of nuclear materials, and all aspects of the safeguarding of facilities and materials. Recently the IE began implementing a program that will place inspectors on site at nuclear power reactors and will provide for national appraisal of licensee performance and for an evaluation of the effectiveness of the inspection programs

  16. New Swedish regulations in the area of plant inspection and in-service inspection

    International Nuclear Information System (INIS)

    Hansson, B.

    1998-01-01

    History and present status od Swedish regulations in the field of NPP inspection and in-service inspection are described. The presentation focuses on the development of regulations and establishing new ones. A description of different organisations involved is included

  17. Inspection of training activities by the NRC's Office of Inspection and Enforcement

    International Nuclear Information System (INIS)

    Ruhlman, W.A.

    1975-01-01

    New requirements in the Code of Federal Regulations, the issuance of new Regulatory Guides and ANSI Standards, have indicated the increased emphasis being placed on training by forces in the Nuclear Industry and the Nuclear Regulatory Commission. A brief description is presented of the functions of the Office of Inspection and Enforcement in the training areas. Three areas are examined: general inspection techniques; training inspection scope; and training inspection bases

  18. 78 FR 54861 - Inspection, Repair, and Maintenance; Driver-Vehicle Inspection Report

    Science.gov (United States)

    2013-09-06

    ... No. FMCSA-2012-0336] RIN 2126-AB46 Inspection, Repair, and Maintenance; Driver-Vehicle Inspection... Federal Register of August 7, 2013, regarding driver vehicle inspection reports. The corrections involve..., Vehicle and Roadside Operations Division, Office of Bus and Truck Standards and Operations, Federal Motor...

  19. The interactive on-site inspection system: An information management system to support arms control inspections

    Energy Technology Data Exchange (ETDEWEB)

    DeLand, S.M.; Widney, T.W.; Horak, K.E.; Caudell, R.B.; Grose, E.M.

    1996-12-01

    The increasing use of on-site inspection (OSI) to meet the nation`s obligations with recently signed treaties requires the nation to manage a variety of inspection requirements. This document describes a prototype automated system to assist in the preparation and management of these inspections.

  20. Ultrasonic inspection of austenitic welds

    International Nuclear Information System (INIS)

    Baikie, B.L.; Wagg, A.R.; Whittle, M.J.; Yapp, D.

    1976-01-01

    The ultrasonic examination of austenitic stainless steel weld metal has always been regarded as a difficult proposition because of the large and variable ultrasonic attenuations and back scattering obtained from apparently similar weld deposits. The work to be described shows how the existence of a fibre texture within each weld deposit (as a result of epitaxial growth through successive weld beads) produces a systematic variation in the ultrasonic attenuation coefficient and the velocity of sound, depending upon the angle between the ultrasonic beam and the fibre axis. Development work has shown that it is possible to adjust the welding parameters to ensure that the crystallographic texture within each weld is compatible with improved ultrasonic transmission. The application of the results to the inspection of a specific weld in type 316 weld metal is described

  1. Dielectric inspection of erythrocyte morphology

    International Nuclear Information System (INIS)

    Hayashi, Yoshihito; Oshige, Ikuya; Katsumoto, Yoichi; Omori, Shinji; Yasuda, Akio; Asami, Koji

    2008-01-01

    We performed a systematic study of the sensitivity of dielectric spectroscopy to erythrocyte morphology. Namely, rabbit erythrocytes of four different shapes were prepared by precisely controlling the pH of the suspending medium, and their complex permittivities over the frequency range from 0.1 to 110 MHz were measured and analyzed. Their quantitative analysis shows that the characteristic frequency and the broadening parameter of the dielectric relaxation of interfacial polarization are highly specific to the erythrocyte shape, while they are insensitive to the cell volume fraction. Therefore, these two dielectric parameters can be used to differentiate erythrocytes of different shapes, if dielectric spectroscopy is applied to flow-cytometric inspection of single blood cells. In addition, we revealed the applicability and limitations of the analytical theory of interfacial polarization to explain the experimental permittivities of non-spherical erythrocytes

  2. Dielectric inspection of erythrocyte morphology

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Yoshihito; Oshige, Ikuya; Katsumoto, Yoichi; Omori, Shinji; Yasuda, Akio [Life Science Laboratory, Materials Laboratories, Sony Corporation, Sony Bioinformatics Center, Tokyo Medical and Dental University, Bunkyo-ku, Tokyo 113-8510 (Japan); Asami, Koji [Laboratory of Molecular Aggregation Analysis, Division of Multidisciplinary Chemistry, Institute for Chemical Research, Kyoto University, Uji, Kyoto 611-0011 (Japan)], E-mail: Yoshihito.Hayashi@jp.sony.com

    2008-05-21

    We performed a systematic study of the sensitivity of dielectric spectroscopy to erythrocyte morphology. Namely, rabbit erythrocytes of four different shapes were prepared by precisely controlling the pH of the suspending medium, and their complex permittivities over the frequency range from 0.1 to 110 MHz were measured and analyzed. Their quantitative analysis shows that the characteristic frequency and the broadening parameter of the dielectric relaxation of interfacial polarization are highly specific to the erythrocyte shape, while they are insensitive to the cell volume fraction. Therefore, these two dielectric parameters can be used to differentiate erythrocytes of different shapes, if dielectric spectroscopy is applied to flow-cytometric inspection of single blood cells. In addition, we revealed the applicability and limitations of the analytical theory of interfacial polarization to explain the experimental permittivities of non-spherical erythrocytes.

  3. Working session 2: Tubing inspection

    International Nuclear Information System (INIS)

    Guerra, J.; Tapping, R.L.

    1997-01-01

    This session was attended by delegates from 10 countries, and four papers were presented. A wide range of issues was tabled for discussion. Realizing that there was limited time available for more detailed discussion, three topics were chosen for the more detailed discussion: circumferential cracking, performance demonstration (to focus on POD and sizing), and limits of methods. Two other subsessions were organized: one dealt with some challenges related to the robustness of current inspection methods, especially with respect to leaving cracked tubes in service, and the other with developing a chart of current NDE technology with recommendations for future development. These three areas are summarized in turn, along with conclusions and/or recommendations. During the discussions there were four presentations. There were two (Canada, Japan) on eddy current probe developments, both of which addressed multiarray probes that would detect a range of flaws, one (Spain) on circumferential crack detection, and one (JRC, Petten) on the recent PISC III results

  4. Safety inspections to TRIGA reactors

    International Nuclear Information System (INIS)

    Byszewski, W.

    1988-01-01

    The operational safety advisory programme was created to provide useful assistance and advice from an international perspective to research reactor operators and regulators on how to enhance operational safety and radiation protection on their reactors. Safety missions cover not only the operational safety of reactors themselves, but also the safety of associated experimental loops, isotope laboratories and other experimental facilities. Safety missions are also performed on request in other Member States which are interested in receiving impartial advice and assistance in order to enhance the safety of research reactors. The results of the inspections have shown that in some countries there are problems with radiation protection practices and nuclear safety. Very often the Safety Analysis Report is not updated, regulatory supervision needs clarification and improvement, maintenance procedures should be more formalised and records and reports are not maintained properly. In many cases population density around the facility has increased affecting the validity of the original safety analysis

  5. Visual Inspection for Caries Detection

    DEFF Research Database (Denmark)

    Gimenez, T; Piovesan, C; Braga, M M

    2015-01-01

    July 2014 to identify published and nonpublished studies in English. Studies of visual inspection were included that 1) assessed accuracy of the method in detecting caries lesions; 2) were performed on occlusal, proximal, or free smooth surfaces in primary or permanent teeth; 3) had a reference...... (from 5,808 articles initially identified) and 1 abstract (from 168) met the inclusion criteria. In general, the analysis demonstrated that the visual method had good accuracy for detecting caries lesions. Although laboratory and clinical studies have presented similar accuracy, clinically obtained...... caries detection method has good overall performance. Furthermore, although the identified studies had high heterogeneity and risk of bias, the use of detailed and validated indices seems to improve the accuracy of the method....

  6. Post-Closure Inspection, Sampling, and Maintenance Report for the Salmon, Mississippi, Site Calendar Year 2011

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-03-01

    This report summarizes the 2011 annual inspection, sampling, measurement, and maintenance activities performed at the Salmon, Mississippi, Site (Salmon site1). The draft Long-Term Surveillance and Maintenance Plan for the Salmon Site, Lamar County, Mississippi (DOE 2007) specifies the submittal of an annual report of site activities with the results of sample analyses. The Salmon site consists of 1,470 acres. The site is located in Lamar County, Mississippi, approximately 10 miles west of Purvis, Mississippi, and about 21 miles southwest of Hattiesburg, Mississippi.

  7. Modifications to the INSPECT model

    Energy Technology Data Exchange (ETDEWEB)

    Dickinson, S [AEA Technology, Winfrith (United Kingdom); Sims, H E [AEA Technology, Harwell (United Kingdom)

    1996-12-01

    The prediction of iodine behaviour in the containment of a PWR following a loss of coolant accident requires a reliable model of the chemistry of iodine in aqueous solution. The INSPECT model, which was developed several years ago, contains a large number of the relevant chemical reactions of iodine and water radiation chemistry. Since the reactions set was first assembled, however, new data on rate constants and mechanisms have become available. In addition, the application of the model to various small-scale experiments has revealed problems in the modelling of some reactions, leading to an under-prediction of the iodine volatility at high pH, although the experiments have demonstrated that the high pH volatility remains satisfactory low. This paper describes the modifications which have been made to the INSPECT model to take account of new data and to improve the modelling where appropriate. The main changes which have been made to the reaction set are as follows: - The rate constants and activation energies for the reactions describing the radiolysis of water have been updated in with recent assessments, and the temperature dependence of the G value for the primary species have been accordance taken into account, - The mechanism and rates of I{sub 2} hydrolysis have been modified in accordance with the latest assessments of this reaction, - The mechanism for the reaction of I{sub 2} with H{sub 2}O{sub 2} has been changed to a form which produces a more realistic pH dependence under neutral and alkaline conditions, - An addition mechanism for the disproportionation of the O{sub 2} ion has been included, reflecting experimental observations that this reaction has a significant first-order component under all but the purest conditions, - Atomic I is treated as a volatile species, with a partition coefficient of 1.9 at 298 K. (Abstract Truncated)

  8. 78 FR 51728 - Fees for Sanitation Inspections of Cruise Ships

    Science.gov (United States)

    2013-08-21

    ... Sanitation Inspections of Cruise Ships AGENCY: Centers for Disease Control and Prevention (CDC), Department... for vessel sanitation inspections for Fiscal Year (FY) 2014. These inspections are conducted by HHS...-yearly inspections and, when necessary, re-inspection. DATES: These fees are effective October 1, 2013...

  9. 77 FR 12843 - Fees for Sanitation Inspections of Cruise Ships

    Science.gov (United States)

    2012-03-02

    ... Sanitation Inspections of Cruise Ships AGENCY: Centers for Disease Control and Prevention (CDC), Department... diseases. The fee schedule for sanitation inspections of passenger cruise ships inspected under VSP was... sanitation inspections. These inspections are conducted by CDC's Vessel Sanitation Program (VSP). VSP assists...

  10. 9 CFR 307.5 - Overtime and holiday inspection service.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Overtime and holiday inspection... INSPECTION AND CERTIFICATION FACILITIES FOR INSPECTION § 307.5 Overtime and holiday inspection service. (a..., at the rate specified in § 391.3, for the cost of the inspection service furnished on any holiday as...

  11. 9 CFR 590.925 - Inspection of imported egg products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inspection of imported egg products... AGRICULTURE EGG PRODUCTS INSPECTION INSPECTION OF EGGS AND EGG PRODUCTS (EGG PRODUCTS INSPECTION ACT) Imports § 590.925 Inspection of imported egg products. (a) Except as provided in § 590.960, egg products offered...

  12. Safety and Inspection Planning of Older Installations

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Ersdal, G.

    2007-01-01

    A basic assumption often made in risk/reliability based inspection planning is that a Bayesian approach can be used. This implies that probabilities of failure can be updated in a consistent way when new information (from inspections and repairs) becomes available. The Bayesian approach and a no-...

  13. Safety and Inspection Planning of Older Installations

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Ersdal, G.

    2008-01-01

    A basic assumption often made in risk- and reliability-based inspection planning is that a Bayesian approach can be used. This implies that probabilities of failure can be updated in a consistent way when new information (from inspections and repairs) becomes available. The Bayesian approach and ...

  14. 14 CFR 21.615 - FAA inspection.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false FAA inspection. 21.615 Section 21.615 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Technical Standard Order Authorizations § 21.615 FAA inspection. Upon the...

  15. Inservice inspection of Halden BWR pressure vessel

    International Nuclear Information System (INIS)

    Foerli, O.; Hernes, T.

    1978-01-01

    A description is given of how the recertification inspection of the 20 years old Halden Reactor pressure vessel was carried out in accordance with the latest ASME-CODES, despite the fact that inspection accessibility was poor. As no volumetric inspection had been carried out since the preservice radiography in 1957, the ultrasonic inspection included the high flux region of all welds. In total 70% of longitudinal welds and 20% of bottom circumferential welds were inspected as well as the bottom nozzle connection. The vessel was not designed with provisions for inservice inspection, the welds are unaccessible from the outside and removal of the lid is virtually impossible. The ultrasonic probes could only be loaded through 77 mm diameter holes in the top lid and remotely positioned inside the vessel. The inspection was performed using 450C and 60OC 1 MHz angle probes and 2.25 MHz normal probes in immersion technique. In a zone around the welds, small regions with lack of bonding between the stainless steel cladding and the boiler steel were revealed. One root defect known and accepted from the preservice radiographs was examined. The defect was found to be 6x30mm as a maximum and well within acceptable limits according to the fracture mechanics analysis method recommended in ASME X1. The inspection required a period of three weeks' work in the reactor hall. (UK)

  16. 23 CFR 650.313 - Inspection procedures.

    Science.gov (United States)

    2010-04-01

    ...) Quality control and quality assurance. Assure systematic quality control (QC) and quality assurance (QA) procedures are used to maintain a high degree of accuracy and consistency in the inspection program. Include... allow assessment of current bridge condition. Record the findings and results of bridge inspections on...

  17. A web environment for inspection service

    International Nuclear Information System (INIS)

    Robles Guemes, N.; Garcia Heras, M.; Cueto-Felgueroso Garcia, C.; Pelaez Gutierrez, J. A.

    2013-01-01

    The in-service inspection fundamental objective is to maintain the structural integrity of structures, systems and components during the life in the installation service. Nuclear power plants are required to implement a Service inspection program in accordance with the established regulation by the Regulatory body.

  18. An intelligent inspection and survey robot

    International Nuclear Information System (INIS)

    Byrd, J.; Holland, J.M.

    1994-01-01

    ARIES (Autonomous Robotic Inspection Experimental System) is a semi-autonomous robotic system intended for use in the automatic inspection of stored containers of low-level nuclear waste. This article describes the technology and how it could be used. 3 refs., 3 figs

  19. Inspections talks with IAEA again broken off

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    North Korea again appears likely to resist more detailed safeguards inspections of its disputed nuclear facilities by the International Atomic Energy Agency. The country's loner status was reinforced during the IAEA General Conference in September, when no other nation joined North Korea in voting against the placement of the inspection issue on the conference's agenda

  20. Risk Based Inspection Planning of Ageing Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Ersdal, Gerhard

    2008-01-01

    . Different approaches for updating inspection plans for older installations are considered in order to achieve decreased inspection intervals as the structure are ageing. The most promising method consists in increasing the rate of defects / crack initiation at the end of the expected lifetime. Different...

  1. Ultrasound periodic inspections of reactor pressure vessels

    International Nuclear Information System (INIS)

    Haniger, L.

    1980-01-01

    Two versions are described of ultrasonic equipment for periodic inspections of reactor pressure vessels. One uses the principle of exchangeable programmators with solid-state logic while the other uses programmable logic with semiconductor memories. The equipment is to be used for inspections of welded joints on the upper part of the V-1 reactor pressure vessel. (L.O.)

  2. Developing equipment for AGR remote visual inspection

    International Nuclear Information System (INIS)

    James, P.W.; Walton, P.J.

    1985-01-01

    The Remote Inspection Group is part of the CEGB's Generation Development and Construction Division, and has responsibility for the design, development, procurement, testing and setting to work of the equipment provided to carry out routine remote visual inspections of its AGRs. This equipment includes both the viewing devices and the necessary placement equipment. (author)

  3. Inspection of nuclear fuel transport in Spain

    International Nuclear Information System (INIS)

    Lobo Mendez, J.

    1977-01-01

    The experience acquired in inspecting nuclear fuel shipments carried out in Spain will serve as a basis for establishing the regulations wich must be adhered to for future transports, as the transport of nuclear fuels in Spain will increase considerably within the next years as a result of the Spanish nuclear program. The experience acquired in nuclear fuel transport inspection is described. (author) [es

  4. 7 CFR 330.105 - Inspection.

    Science.gov (United States)

    2010-01-01

    ... inspector notifies the Customs authorities should be held for inspection shall be released by Customs... be handled in accordance with the joint customs and postal regulations for inspecting and handling... of Customs for the release by Customs officers on behalf of the inspector of any class of means of...

  5. Software inspections at Fermilab -- Use and experience

    International Nuclear Information System (INIS)

    Berman, E.F.

    1998-01-01

    Because of the critical nature of DA/Online software it is important to commission software which is correct, usable, reliable, and maintainable, i.e., has the highest quality possible. In order to help meet these goals Fermi National Accelerator Laboratory (Fermilab) has begun implementing a formal software inspection process. Formal Inspections are used to reduce the number of defects in software at as early a stage as possible. These Inspections, in use at a wide variety of institutions (e.g., NASA, Motorola), implement a well-defined procedure that can be used to improve the quality of many different types of deliverables. The inspection process, initially designed by Michael Fagan, will be described as it was developed and as it is currently implemented at Fermilab where it has been used to improve the quality of a variety of different experiment DA/Online software. Benefits of applying inspections at many points in the software life-cycle and benefits to the people involved will be investigated. Experience with many different types of Inspections and the lessons learned about the inspection process itself will be detailed. Finally, the future of Inspections at Fermilab will be given

  6. Developing inspection strategies to support local activities

    DEFF Research Database (Denmark)

    Jensen, Per Langå

    2003-01-01

    An analysis of the Danish development in regulatory praxsis within occupational health and safety with a detailed description of Adapted Inspection.......An analysis of the Danish development in regulatory praxsis within occupational health and safety with a detailed description of Adapted Inspection....

  7. The evidence base for school inspection frameworks

    NARCIS (Netherlands)

    Scheerens, Jaap; Ehren, Melanie Catharina Margaretha

    2015-01-01

    This article describes how Inspectorates of Education operationalize different inspection goals (control, improvement, liaison) in their inspection indicator frameworks. The paper provides an overview and examples of the indicators used across a number of countries and how these are incorporated in

  8. The Ontario hydro low pressure turbine disc inspection program automated ultrasonic inspection systems - an overview

    International Nuclear Information System (INIS)

    Huggins, J.W.; Chopcian, M.; Grabish, M.

    1990-01-01

    An overview of the Ontario Hydro Low Pressure Turbine Disc Inspection Program is presented. The ultrasonic inspection systems developed in-house to inspect low pressure turbine discs at Pickering and Bruce Nuclear Generating stations are described. Three aspects of the program are covered: PART I - Background to inspection program, disc cracking experience, and development of an in-house inspection capability: PART II - System development requirements; ultrasonic equipment, electromechanical subsystems and instrumentation console: PART III - Customized software for flaw detection, sizing, data acquisition/storage, advanced signal processing, reports, documentation and software based diagnostics

  9. Review of progress in magnetic particle inspection

    Science.gov (United States)

    Eisenmann, David J.; Enyart, Darrel; Lo, Chester; Brasche, Lisa

    2014-02-01

    Magnetic particle inspection (MPI) has been widely utilized for decades, and sees considerable use in the aerospace industry with a majority of the steel parts being inspected with MPI at some point in the lifecycle. Typical aircraft locations inspected are landing gear, engine components, attachment hardware, and doors. In spite of its numerous applications the method remains poorly understood, and there are many aspects of that method which would benefit from in-depth study. This shortcoming is due to the fact that MPI combines the complicated nature of electromagnetics, metallurgical material effects, fluid-particle motion dynamics, and physiological human factors into a single inspection. To promote understanding of the intricate method issues that affect sensitivity, or to assist with the revision of industry specifications and standards, research studies will be prioritized through the guidance of a panel of industry experts, using an approach which has worked successfully in the past to guide fluorescent penetrant inspection (FPI) research efforts.

  10. Turning inspection regulations into training tools

    International Nuclear Information System (INIS)

    Finley, D.; Wheatcraft, D.

    1996-01-01

    In response to suggestions from internal and State of California auditors, the Hazardous Waste Management Division (HWM) at Lawrence Livermore National Laboratory prepared an Inspection Schedule and Guidance Document that summarizes the Laboratory's inspection schedule and procedures for waste treatment, storage, and disposal facilities (TSDFs). Because it explains and comments in detail on the inspection schedule, forms, and procedures, this document is a centralized reference for HWM managers and personnel performing TSDF inspections at the Laboratory. It is also a training tool for experienced and new inspectors, standardizing the inspections of personnel with experience and explaining to novices what to look for and why. This poster presentation traces the team effort that created this document and provides specific examples of how the document was developed and how it is used

  11. Advances in technologies for feeder pipe inspections

    Energy Technology Data Exchange (ETDEWEB)

    Ten Grotenhuis, R.; Verma, Y.; Hitchcox, T.; Sakuta, A. [Ontario Power Generation, Inspection and Maintenance Div., Toronto, Ontario (Canada)

    2014-07-15

    The successful development of the Matrix Inspection Technique (MIT) for feeder weld area applications has been followed up with a project to leverage the technology to address other aspects of feeder inspection. The goal of the project is to adapt the technology to provide full circumferential inspection of feeder pipes for FAC thinning and, potentially, for axial cracking. The project necessitated evolving a new generation of high speed, high element count data acquisition instruments. It also required the development of custom inspection arrays, innovative approaches to sealing the water column, use of inertial motion sensors to synthesize encoder inputs, real-time visual feedback for the operator, and enhanced automated analysis software capable of plotting the inspected configuration in 3D. The individual components of the system are currently being integrated into a whole. The results obtained to date demonstrate the approach to be fundamentally sound. (author)

  12. On automatic visual inspection of reflective surfaces

    DEFF Research Database (Denmark)

    Kulmann, Lionel

    1995-01-01

    surfaces, providing new and exciting applications subject to automated visual inspection. Several contextual features have been surveyed along with introduction of novel methods to perform data-dependent enhancement of local surface appearance . Morphological methods have been described and utilized......This thesis descrbes different methods to perform automatic visual inspection of reflective manufactured products, with the aim of increasing productivity, reduce cost and improve the quality level of the production. We investigate two different systems performing automatic visual inspection....... The first is the inspection of highly reflective aluminum sheets, used by the Danish company Bang & Olufsen, as a part of the exterior design and general appearance of their audio and video products. The second is the inspection of IBM hard disk read/write heads for defects during manufacturing. We have...

  13. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-10-01

    A fundamental premise of the Nuclear Regulatory Commission's (NRC) licensing and inspection program is that licensees are responsible for the proper construction and safe and efficient operation of their nuclear power plants. The total government-industry system for the inspection of commercial nuclear facilities has been designed to provide for multiple levels of inspection and verification. Licensees, contractors, and vendors each participate in a quality verification process in compliance with requirements prescribed by the NRC's rules and regulations (Title 10 Code of Federal Regulations). The NRC performs an overview of the commercial nuclear industry by inspection to determine whether its requirements are being met by licensees and their contractors, while the major inspection effort is performed by the industry within the framework of ongoing quality verification programs

  14. Noncontacting Optical Measurement And Inspection Systems

    Science.gov (United States)

    Asher, Jeffrey A.; Jackson, Robert L.

    1986-10-01

    Product inspection continues to play a growing role in the improvement of quality and reduction of scrap. Recent emphasis on precision measurements and in-process inspection have been a driving force for the development of noncontacting sensors. Noncontacting sensors can provide long term, unattended use due to the lack of sensor wear. Further, in applications where, sensor contact can damage or geometrically change the part to be measured or inspected, noncontacting sensors are the only technical approach available. MTI is involved in the development and sale of noncontacting sensors and custom inspection systems. This paper will review the recent advances in noncontacting sensor development. Machine vision and fiber optics sensor systems are finding a wide variety of industrial inspection applications. This paper will provide detailed examples of several state-of-the-art applications for these noncontacting sensors.

  15. Development of radioactive materials inspection system

    International Nuclear Information System (INIS)

    Yang Lu; Wang Guobao; Chen Yuhua; Li Latu; Zhang Sujing

    2005-01-01

    Radioactive materials inspection system which is applied to inspect the horror activities of radioactive materials and its illegal transfer. The detector sections are made of highly stable and credible material. It has high sensitivity to radioactive materials. The inspect lowest limit of inspection is the 2-3 times to the background, the energy range is 30 keV-2.5 MeV and the response time is 0.5 s. Inspection message can be transmitted through wired or wireless web to implement remote control. The structure of the system is small, light and convenient. It is ideal for protecting society and public from the harm of the radiation. (authors)

  16. Inspection of Candu Nuclear Reactor Fuel Channels

    International Nuclear Information System (INIS)

    Baron, J.; Jarvis, G.N.; Dolbey, M.P.; Hayter, D.M.

    1986-01-01

    The Channel Inspection and Gauging Apparatus of Reactors (CIGAR) is a fully atomated, remotely operated inspection system designed to perform multi-channel, multi-task inspection of CANDU reactor fuel channels. Ultrasonic techniques are used for flaw detection, (with a sensitivity capable of detecting a 0.075 mm deep notch with a signal to noise ratio of 10 dB) and pressure tube wall thickness and diameter measurements. Eddy currrent systems are used to detect the presence of spacers between the coaxial pressure tube and calandria tube, as well as to measure their relative spacing. A servo-accelerometer is used to estimate the sag of the fuel channels. This advanced inspection system was commissioned and declared in service in September 1985. The paper describes the inspection systems themselves and discussed the results achieved to-date. (author) [pt

  17. Regulatory inspection of the egyptian gamma irradiator using a proposed inspection checklist

    International Nuclear Information System (INIS)

    Abdel-Ghani, A.H.

    2000-01-01

    Regulatory inspections are one of the most important elements of a regulatory programme. It shall be performed in all areas of the regulatory responsibility and during all phases of siting, design, construction, commissioning, operation, maintenance and decommissioning of an irradiator facility. The egyptian mega gamma irradiator operating since december 1979 has a Co-60 source of about 400 kilo curies and is used mainly for sterilization of medical supplies and pharmaceuticals and for preservation of some food stuffs. The constructor (Nordion international Inc.) recommended an extensive inspection programme. In accordance with the international and national (2.3) regulations as well as the licensing conditions, the competent authority (NCNSRC) shall perform regulatory inspections both announced and unannounced. In order to facilitate the inspection task and to harmonize the inspection reports a checklist for inspection is proposed which can be used also as an inspection report form

  18. How Agencies Inspect. A Comparative Study of Inspection Policies in Eight Swedish Government Agencies

    International Nuclear Information System (INIS)

    Lindblom, Lars; Clausen, Jonas; Edvardsson, Karin; Hayenhielm, Madeleine; Hermansson, Helene; Nihlen, Jessica; Palm, Elin; Ruden, Christina; Wikman, Per; Hansson, Sven Ove

    2003-04-01

    Eight Swedish authorities with inspection tasks in the areas of health, safety, and environmental protection have been compared, namely the authorities responsible for nuclear safety, radiation protection, railway, marine and aviation safety, environmental protection, chemicals control, and health and safety on workplaces. Significant differences in inspection policies and practices between the authorities were found, such as: diverging definitions of supervision and inspection that complicate comparisons, different priority-setting principles for inspections, variations in inspection frequencies (between 13 and 0.03 inspections per company and year), different practices with respect to notifying companies before inspection visits, and in particular, large differences in the extent to which non-compliance with regulations is reported to legal authorities. It was concluded that these agencies have much to gain from increasing their cooperation in methods development, evaluation studies, and education of inspectors

  19. Benchmarking on Inspection Practices. First Triennial Report of the Working Group on Inspection Practices

    International Nuclear Information System (INIS)

    2017-01-01

    The WGIP Nuclear Power Plant (NPP) Observed Inspection Practices Program is intended to promote co-operation and learning among member countries and to collect and provide them with information for improving the effectiveness of existing regulatory inspection practices. This is accomplished by observing how inspections are carried out by other member countries and issuing a WGIP observed inspection report that includes observations (e.g. inspection techniques, obstacles encountered), lessons learnt and potential commendable practices that could be used by a regulatory body. This first triennial report documents the results of a consistency check performed between all six WGIP observed inspection reports and ratifies certain observations, lessons learnt and potential commendable practices identified by WGIP observed inspection participants

  20. Post-Closure Inspection and Monitoring Report for Corrective Action Unit 417: Central Nevada Test Area Surface, Hot Creek Valley, Nevada, for Calendar Year 2007

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-09-01

    This report presents data collected during the annual post-closure site inspection conducted at the Central Nevada Test Area Surface Corrective Action Unit (CAU) 417 in May 2007. The annual post-closure site inspection included inspections of the UC-1, UC-3, and UC-4 sites in accordance with the Post-Closure Monitoring Plan provided in the CAU 417 Closure Report (NNSA/NV 2001). The annual inspection conducted at the UC-1 Central Mud Pit (CMP) indicated the site and soil cover were in good condition. No new cracks or fractures were observed in the soil cover during the annual inspection. A crack on the west portion of the cover was observed during the last quarterly inspection in December 2006. This crack was filled with bentonite as part of the maintenance activities conducted in February 2007 and will be monitored during subsequent annual inspections. The vegetation on the soil cover was adequate but showing signs of the area's ongoing drought. No issues were identified with the CMP fence, gate, or subsidence monuments. New DOE Office of Legacy Management signs with updated emergency phone numbers were installed as part of this annual inspection, no issues were identified with the warning signs and monuments at the other two UC-1 locations. The annual subsidence survey was conducted at UC-1 CMP and UC-4 Mud Pit C as part of the maintenance activities conducted in February 2007. The results of the subsidence surveys indicate that the covers are performing as expected, and no unusual subsidence was observed. A vegetation survey of the UC-1 CMP cover and adjacent areas was conducted as part of the annual inspection in May 2007. The vegetation survey indicated that revegetation continues to be successful, although stressed due to the area's prevailing drought conditions. The vegetation should continue to be monitored to document any changes in the plant community and to identify conditions that could potentially require remedial action to maintain a viable