The Rationale of Crisis Management – On the Handling of Coincidence in Economic Situation

Directory of Open Access Journals (Sweden)

Peter Bendixen

2010-07-01

Full Text Available The subject of this essay is too complex a problem as to cover all details in depth and, thus, draws its attention only to core aspects of the handling of coincidence leaving out sophisticated studies and analytic findings as well as detailed reference to economic literature though there is not very much. On the other hand, for a lot of actual as well as general reasons, the subject is too important a matter as to ignore the serious methodological problems of crisis management, which are rooted in some politically still active bias hidden in orthodox neo-classical economics (Stiglitz 2010. If crisis management continues to follow traditional rationales, it will fail realizing the increasing dynamic of crises within the globalising economies of the world. No existing economy can be considered as an isolated system of its own embedded in a stable composition of societal surroundings. Obviously, many a critical situation has its origin in the sphere of civilization, of political discrepancies, and of administrative inflexibilities. On the other hand, any grave amplitude of markets would touch the entire social surrounding. The belief in the markets’ strength of self-regulation is a dangerous construction of orthodox economics (Bendixen 2009b, 2010. The view on crises suggested here is that of a holistic approach to understand a critical situation. Any interpretation of a situation includes empirical dates and figures based on analytic research, but solving a problem is not an act of logical derivation from findings, as if a solution can be excavated in the mud of reality by empirical studies only. Empirical figures report events of the past; the future does not reveal any empiricism. This would be a contradiction in itself. The end of a crisis as well as the search for solutions to fight the problems revealed is unavoidably a view into the future. Therefore, the rationale of crisis management cannot be made of pure empiricism but should include a

A Quantitative Team Situation Awareness Measurement Method Considering Technical and Nontechnical Skills of Teams

Directory of Open Access Journals (Sweden)

Ho Bin Yim

2016-02-01

Full Text Available Human capabilities, such as technical/nontechnical skills, have begun to be recognized as crucial factors for nuclear safety. One of the most common ways to improve human capabilities in general is training. The nuclear industry has constantly developed and used training as a tool to increase plant efficiency and safety. An integrated training framework was suggested for one of those efforts, especially during simulation training sessions of nuclear power plant operation teams. The developed training evaluation methods are based on measuring the levels of situation awareness of teams in terms of the level of shared confidence and consensus as well as the accuracy of team situation awareness. Verification of the developed methods was conducted by analyzing the training data of real nuclear power plant operation teams. The teams that achieved higher level of shared confidence showed better performance in solving problem situations when coupled with high consensus index values. The accuracy of nuclear power plant operation teams' situation awareness was approximately the same or showed a similar trend as that of senior reactor operators' situation awareness calculated by a situation awareness accuracy index (SAAI. Teams that had higher SAAI values performed better and faster than those that had lower SAAI values.

A combined constraint handling framework: an empirical study

DEFF Research Database (Denmark)

Si, Chengyong; Hu, Junjie; Lan, Tian

2017-01-01

This paper presents a new combined constraint handling framework (CCHF) for solving constrained optimization problems (COPs). The framework combines promising aspects of different constraint handling techniques (CHTs) in different situations with consideration of problem characteristics. In order...

Remote handling machines

International Nuclear Information System (INIS)

Sato, Shinri

1985-01-01

In nuclear power facilities, the management of radioactive wastes is made with its technology plus the automatic techniques. Under the radiation field, the maintenance or aid of such systems is important. To cope with this situation, MF-2 system, MF-3 system and a manipulator system as remote handling machines are described. MF-2 system consists of an MF-2 carrier truck, a control unit and a command trailer. It is capable of handling heavy-weight objects. The system is not by hydraulic but by electrical means. MF-3 system consists of a four-crawler truck and a manipulator. The truck is versatile in its posture by means of the four independent crawlers. The manipulator system is bilateral in operation, so that the delicate handling is made possible. (Mori, K.)

Determination and evaluation of the radiological situation using mobile measurements during the ground phase

Energy Technology Data Exchange (ETDEWEB)

Obrecht, R.; Pohl, H.; Schneider, S.; Grimm, C. [Umweltministerium Baden-Wuerttemberg, Stuttgart (Germany); Neff, Ulrich; Coutinho, Paula; Mueller, Ulrich; Mandel, Carmen [Landesanstalt fuer Umweltschutz, Messungen und Naturschutz Baden-Wuerttemberg, Karlsruhe (Germany); Wilbois, Thomas; Ren, Yongxiang [T-Systems GEI GmbH, Ulm (Germany); Chaves, Fernando [Fraunhofer Inst. IITB, Karlsruhe (Germany)

2009-08-15

The nuclear reactor remote monitoring system of the state of Baden-Wuerttemberg (Kernreaktor-Fernueberwachung Baden-Wuerttemberg - KFUeBW) is implemented according to the recently renewed ''recommendations for remote monitoring of nuclear power plants''. In Baden-Wuerttemberg, the application area of the system covers both, the surveillance of internal procedures on one hand, and the handling of incidents or accidents on the other. The following paper shows the role of the KFUeregarding the determination and evaluation of the radiological situation in the range of off-site emergency response. Progress is reported on the measurement conception and the technical possibilities for the investigation of the radiological situation after the end of the deposition of radio nuclides (ground phase). (orig.)

Mitigating fuel handling situations during station blackout in TAPP-3 and

International Nuclear Information System (INIS)

Chugh, V.K.; Roy, Shibaji; Gupta, H.; Inder Jit

2002-01-01

Full text: On power refueling is one of the important features of PHWRs. fuelling machine (FM) Head becomes part of the reactor pressure boundary during refueling operations. Hot irradiated (spent) fuel bundles are received in the FM Head from the Reactor and transferred to spent fuel storage bay (SFSB). These bundles pass through various fuel handling (FH) Equipment under submerged condition except during the dry transfer operation. Situations of station blackout (SBO) i.e. postulated simultaneous failure of Class III and Class IV electric power, could persist for a long period, during on-reactor or off-reactor FH operations, with the spent fuel bundles being any where in the system between the reactor and SFSB. The cooling provisions for the spent fuel bundles vary depending upon the stage of operation. During SBO, it becomes difficult to maintain cooling to these fuel bundles due to the limited availability of Class II power and instrument air. However, cooling is essential, to ensure the safety of the bundles. As discussed in the paper, safety of these fuel bundles in the system and/or for those lying in the liner tube region of the reactor end fitting is ensured, during SBO, by resorting to passive means like stay-put, gravity- fill, D 2 O-steaming etc. for cooling the bundles. Various scenarios have been identified for cooling provisions of the bundles in the system. The paper also describes consequences like loss of D 2 O inventory, rise in ambient temperature and pressure and tritium build-up in Reactor Building, emanating from these cooling schemes

A shuttle and space station manipulator system for assembly, docking, maintenance, cargo handling and spacecraft retrieval (preliminary design). Volume 3: Concept analysis. Part 1: Technical

Science.gov (United States)

1972-01-01

Information backing up the key features of the manipulator system concept and detailed technical information on the subsystems are presented. Space station assembly and shuttle cargo handling tasks are emphasized in the concept analysis because they involve shuttle berthing, transferring the manipulator boom between shuttle and station, station assembly, and cargo handling. Emphasis is also placed on maximizing commonality in the system areas of manipulator booms, general purpose end effectors, control and display, data processing, telemetry, dedicated computers, and control station design.

Fleet Sizing of Automated Material Handling Using Simulation Approach

Science.gov (United States)

Wibisono, Radinal; Ai, The Jin; Ratna Yuniartha, Deny

2018-03-01

Automated material handling tends to be chosen rather than using human power in material handling activity for production floor in manufacturing company. One critical issue in implementing automated material handling is designing phase to ensure that material handling activity more efficient in term of cost spending. Fleet sizing become one of the topic in designing phase. In this research, simulation approach is being used to solve fleet sizing problem in flow shop production to ensure optimum situation. Optimum situation in this research means minimum flow time and maximum capacity in production floor. Simulation approach is being used because flow shop can be modelled into queuing network and inter-arrival time is not following exponential distribution. Therefore, contribution of this research is solving fleet sizing problem with multi objectives in flow shop production using simulation approach with ARENA Software

How Farm Animals React and Perceive Stressful Situations Such As Handling, Restraint, and Transport

Directory of Open Access Journals (Sweden)

Temple Grandin

2015-12-01

Full Text Available An animal that has been carefully acclimated to handling may willingly re-enter a restrainer. Another animal may have an intense agitated behavioral reaction or refuse to re-enter the handling facility. Physiological measures of stress such as cortisol may be very low in the animal that re-enters willingly and higher in animals that actively resist restraint. Carefully acclimating young animals to handling and restraint can help improve both productivity and welfare by reducing fear stress. Some of the topics covered in this review are: How an animal perceives handling and restraint, the detrimental effects of a sudden novel event, descriptions of temperament and aversion tests and the importance of good stockmanship.

Didactical Handling of Students' Reasoning Processes in Problem Solving Situations

Science.gov (United States)

Brousseau, Guy; Gibel, Patrick

2005-01-01

In this paper, we analyze an investigative situation proposed to a class of 5th graders in a primary school. The situation is based on the following task: In a sale with group rates on a sliding scale, the students must find the lowest possible purchase price for a given number of tickets. A study of students' arguments made it possible to…

Grain Grading and Handling.

Science.gov (United States)

Rendleman, Matt; Legacy, James

This publication provides an introduction to grain grading and handling for adult students in vocational and technical education programs. Organized in five chapters, the booklet provides a brief overview of the jobs performed at a grain elevator and of the techniques used to grade grain. The first chapter introduces the grain industry and…

The prefect facing emergency situation

International Nuclear Information System (INIS)

Masse, H.

2006-01-01

In the field of emergency procedures regarding the protection of life, property and the environment, the 'prefet' of a department is the only public authority both representative of the state and accountable. In France laws and regulations have been in recent years revised in order to modernize emergency situations management. The 'prefet' of the Drome 'department', Henri MASSE, presents a summary of recent developments and explains how his services are organised in order to be able to handle emergency situations. He also focuses on his experience of handling the specific difficulties of nuclear risks, his department sheltering numerous nuclear facilities: EURODIF Pierrelatte nuclear fuel enrichment plant, EDF Tricastin nuclear power plant, AREVA Valence FBFC nuclear fuel manufacturing unit, etc. (author)

Aerobot Sampling and Handling System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Honeybee Robotics proposes to: ?Derive and document the functional and technical requirements for Aerobot surface sampling and sample handling across a range of...

Constrained Optimization Based on Hybrid Evolutionary Algorithm and Adaptive Constraint-Handling Technique

DEFF Research Database (Denmark)

Wang, Yong; Cai, Zixing; Zhou, Yuren

2009-01-01

A novel approach to deal with numerical and engineering constrained optimization problems, which incorporates a hybrid evolutionary algorithm and an adaptive constraint-handling technique, is presented in this paper. The hybrid evolutionary algorithm simultaneously uses simplex crossover and two...... mutation operators to generate the offspring population. Additionally, the adaptive constraint-handling technique consists of three main situations. In detail, at each situation, one constraint-handling mechanism is designed based on current population state. Experiments on 13 benchmark test functions...... and four well-known constrained design problems verify the effectiveness and efficiency of the proposed method. The experimental results show that integrating the hybrid evolutionary algorithm with the adaptive constraint-handling technique is beneficial, and the proposed method achieves competitive...

Event detection and exception handling strategies in the ASDEX Upgrade discharge control system

International Nuclear Information System (INIS)

Treutterer, W.; Neu, G.; Rapson, C.; Raupp, G.; Zasche, D.; Zehetbauer, T.

2013-01-01

Highlights: •Event detection and exception handling is integrated in control system architecture. •Pulse control with local exception handling and pulse supervision with central exception handling are strictly separated. •Local exception handling limits the effect of an exception to a minimal part of the controlled system. •Central Exception Handling solves problems requiring coordinated action of multiple control components. -- Abstract: Thermonuclear plasmas are governed by nonlinear characteristics: plasma operation can be classified into scenarios with pronounced features like L and H-mode, ELMs or MHD activity. Transitions between them may be treated as events. Similarly, technical systems are also subject to events such as failure of measurement sensors, actuator saturation or violation of machine and plant operation limits. Such situations often are handled with a mixture of pulse abortion and iteratively improved pulse schedule reference programming. In case of protection-relevant events, however, the complexity of even a medium-sized device as ASDEX Upgrade requires a sophisticated and coordinated shutdown procedure rather than a simple stop of the pulse. The detection of events and their intelligent handling by the control system has been shown to be valuable also in terms of saving experiment time and cost. This paper outlines how ASDEX Upgrade's discharge control system (DCS) detects events and handles exceptions in two stages: locally and centrally. The goal of local exception handling is to limit the effect of an unexpected or asynchronous event to a minimal part of the controlled system. Thus, local exception handling facilitates robustness to failures but keeps the decision structures lean. A central state machine deals with exceptions requiring coordinated action of multiple control components. DCS implements the state machine by means of pulse schedule segments containing pre-programmed waveforms to define discharge goal and control

Event detection and exception handling strategies in the ASDEX Upgrade discharge control system

Energy Technology Data Exchange (ETDEWEB)

Treutterer, W., E-mail: Wolfgang.Treutterer@ipp.mpg.de; Neu, G.; Rapson, C.; Raupp, G.; Zasche, D.; Zehetbauer, T.

2013-10-15

Highlights: •Event detection and exception handling is integrated in control system architecture. •Pulse control with local exception handling and pulse supervision with central exception handling are strictly separated. •Local exception handling limits the effect of an exception to a minimal part of the controlled system. •Central Exception Handling solves problems requiring coordinated action of multiple control components. -- Abstract: Thermonuclear plasmas are governed by nonlinear characteristics: plasma operation can be classified into scenarios with pronounced features like L and H-mode, ELMs or MHD activity. Transitions between them may be treated as events. Similarly, technical systems are also subject to events such as failure of measurement sensors, actuator saturation or violation of machine and plant operation limits. Such situations often are handled with a mixture of pulse abortion and iteratively improved pulse schedule reference programming. In case of protection-relevant events, however, the complexity of even a medium-sized device as ASDEX Upgrade requires a sophisticated and coordinated shutdown procedure rather than a simple stop of the pulse. The detection of events and their intelligent handling by the control system has been shown to be valuable also in terms of saving experiment time and cost. This paper outlines how ASDEX Upgrade's discharge control system (DCS) detects events and handles exceptions in two stages: locally and centrally. The goal of local exception handling is to limit the effect of an unexpected or asynchronous event to a minimal part of the controlled system. Thus, local exception handling facilitates robustness to failures but keeps the decision structures lean. A central state machine deals with exceptions requiring coordinated action of multiple control components. DCS implements the state machine by means of pulse schedule segments containing pre-programmed waveforms to define discharge goal and control

Understanding situation awareness and its importance in patient safety.

Science.gov (United States)

Gluyas, Heather; Harris, Sarah-Jane

2016-04-20

Situation awareness describes an individual's perception, comprehension and subsequent projection of what is going on in the environment around them. The concept of situation awareness sits within the group of non-technical skills that include teamwork, communication and managing hierarchical lines of communication. The importance of non-technical skills has been recognised in safety-critical industries such as aviation, the military, nuclear, and oil and gas. However, health care has been slow to embrace the role of non-technical skills such as situation awareness in improving outcomes and minimising the risk of error. This article explores the concept of situation awareness and the cognitive processes involved in maintaining it. In addition, factors that lead to a loss of situation awareness and strategies to improve situation awareness are discussed.

Handling of Polyvinylsiloxane Versus Polyether for Implant Impressions.

Science.gov (United States)

Farhan, Daniel; Lauer, Wiebke; Heydecke, Guido; Aarabi, Ghazal; Reissmann, Daniel R

2016-01-01

This study compared polyvinylsiloxane with polyether in handling dental impressions. Each participant (N = 39) made four impressions, each a combination of pickup and reseating techniques with polyether or polyvinylsiloxane, of one implant cast representing a specific clinical situation (tooth gaps, limited residual dentition, or edentulous jaw). Handling of impressions was subsequently rated by using a 12-item questionnaire with 100-mm visual analog scales. While mean satisfaction scores were higher for polyvinylsiloxane than for polyether (69.5/63.0, P < .001), differences among subgroups were statistically significant only for pickup technique, limited residual dentition, and edentulous jaw. Implant impressions made with polyvinylsiloxane using a pickup technique seem to be the best option for most clinical situations.

Technical Agency in Practice

DEFF Research Database (Denmark)

Krummheuer, Antonia Lina

2015-01-01

) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

Radiation protection of workers in radiological emergency situation. Proceedings of the technical day

International Nuclear Information System (INIS)

Rannou, Alain; Gosset, Eric; Lahaye, Thierry; Foucher, Laurent; Couasnon, Olivier; Bouchery, Pascal; Gaillard-Lecanu, Emmanuelle; Pectorin, Xavier; Fusil, Laurence; Boudergui, Karim; Adhemar, Bruno; Devin, Patrick; Mace, Jean-Reynald; Chevallier, Michel; Leautaud, Jean-Marc; LANCE, Benoit

2015-03-01

Following the Fukushima-Daichi accident, several actions have been taken in France from the lessons learnt from the accident: the elaboration of a national plan for the management of a major nuclear or radiological accident, and the safety complementary evaluations to be carried out by nuclear operators. As a complement to the measures to be implemented for the protection of the overall population in emergency radiological situation, the protection of workers mobilized for the management of the crisis has also to be taken into account in the framework of these measures. The French Society of Radiation Protection (SFRP) has organized a technical day to take stock of this question. The program comprises 4 topical sessions dealing with: the main actions taken at the national scale after the Fukushima-Daichi accident, the strategies and intervention means of nuclear operators in case of radiological emergency, the radiation protection R and D for the protection of intervenors in case of radiological emergency, and the main actions implemented at the international scale and their perspectives. This document brings together the abstracts and the presentations (slides) of the different talks given at the meeting: 1 - Health status and lessons learnt from the Fukushima accident - workers (Alain RANNOU, IRSN); 2 - National response plan to a major nuclear or radiologic accident (Eric GOSSET, SGDSN); 3 - Legal framework applicable to intervenors (Thierry LAHAYE, DGT); 4 - Prescriptions linked with complementary safety and liability studies (Laurent FOUCHER, ASN); 5 - EDF: radiological risk management in emergency situation (Pascal BOUCHERY, EDF); 6 - CEA: intervention strategy, means and radiation protection (Xavier PECTORIN, Laurence FUSIL - CEA); 7 - AREVA: FINA's Intervention and workers' radiation protection (Bruno ADHEMAR, Patrick DEVIN - AREVA); 8 - Intervention in radiological emergency situation: the INTRA (Robots intervention on accidents) economic

TITLE III EVALUATION REPORT FOR THE MATERIAL AND PERSONNEL HANDLING SYSTEM

International Nuclear Information System (INIS)

T. A. Misiak

1998-01-01

This Title III Evaluation Report (TER) provides the results of an evaluation that was conducted on the Material and Personnel Handling System. This TER has been written in accordance with the ''Technical Document Preparation Plan for the Mined Geologic Disposal System Title III Evaluation Reports'' (BA0000000-01717-4600-00005 REV 03). The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the as-constructed Material and Personnel Handling System. Recommendations for resolving discrepancies between the as-constructed system, the technical baseline requirements, and the baseline design are included in this report. Cost and Schedule estimates are provided for all recommended modifications

Crisis Situations in Engineering Product Development

DEFF Research Database (Denmark)

Muenzberg, Christopher; Hammer, Jens; Brem, Alexander

2016-01-01

approaches reduce the problem identification time and increase the efficiency of crisis management. The goal of this research is to identify methods which are able to support the crisis management process successfully. Therefore, a literature-based analysis of developing methods, especially TRIZ is conducted......Crisis situations are special situations during the development process. They are characterized by time and handling pressure. Therefore, it is necessary to identify and apply a methodical problem solving approach to overcome these situations. Due to their prescriptive character, problem solving...

Break-glass handling exceptional situations in access control

CERN Document Server

Petritsch, Helmut

2014-01-01

Helmut Petritsch describes the first holistic approach to Break-Glass which covers the whole life-cycle: from access control modeling (pre-access), to logging the security-relevant system state during Break-Glass accesses (at-access), and the automated analysis of Break-Glass accesses (post-access). Break-Glass allows users to override security restrictions in exceptional situations. While several Break-Glass models specific to given access control models have already been discussed in research (e.g., extending RBAC with Break-Glass), the author introduces a generic Break-Glass model. The pres

Does teaching non-technical skills to medical students improve those skills and simulated patient outcome?

Science.gov (United States)

Hagemann, Vera; Herbstreit, Frank; Kehren, Clemens; Chittamadathil, Jilson; Wolfertz, Sandra; Dirkmann, Daniel; Kluge, Annette; Peters, Jürgen

2017-03-29

The purpose of this study is to evaluate the effects of a tailor-made, non-technical skills seminar on medical student's behaviour, attitudes, and performance during simulated patient treatment. Seventy-seven students were randomized to either a non-technical skills seminar (NTS group, n=43) or a medical seminar (control group, n=34). The human patient simulation was used as an evaluation tool. Before the seminars, all students performed the same simulated emergency scenario to provide baseline measurements. After the seminars, all students were exposed to a second scenario, and behavioural markers for evaluating their non-technical skills were rated. Furthermore, teamwork-relevant attitudes were measured before and after the scenarios, and perceived stress was measured following each simulation. All simulations were also evaluated for various medical endpoints. Non-technical skills concerning situation awareness (ptechnical skills to improve student's non-technical skills. In a next step, to improve student's handling of emergencies and patient outcomes, non-technical skills seminars should be accompanied by exercises and more broadly embedded in the medical school curriculum.

Technical Network

CERN Multimedia

2007-01-01

In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

Intertextuality for Handling Complex Environmental Issues

Science.gov (United States)

Byhring, Anne Kristine; Knain, Erik

2016-01-01

Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify…

Spent fuel receipt and lag storage facility for the spent fuel handling and packaging program

International Nuclear Information System (INIS)

Black, J.E.; King, F.D.

1979-01-01

Savannah River Laboratory (SRL) is participating in the Spent Fuel Handling and Packaging Program for retrievable, near-surface storage of spent light water reactor (LWR) fuel. One of SRL's responsibilities is to provide a technical description of the wet fuel receipt and lag storage part of the Spent Fuel Handling and Packaging (SFHP) facility. This document is the required technical description

Fuel handling at Cernavoda 1 N.P.S. - commissioning and training philosophy

Energy Technology Data Exchange (ETDEWEB)

Standen, G W [AECL-Ansaldo Consortium, Cernavoda (Romania); Tiron, C; Marinescu, S [Regia Nationala de Electricitate (RENEL), Cernavoda (Romania); [Filiala Centrala Nuclearo Electrica (FCNE), Cernavoda (Romania)

1997-12-31

Efficient operation of a Candu nuclear power plant depends greatly on the reliable and safe operation of the fuel handling system. Successful commissioning of the system is obviously a key aspect of the reliability of the system and this coupled with a rigorous training programme for the fuel handling staff will ensure the system`s safe operation. This paper describes the philosophy used at Cernavoda 1 N.P.S. for the commissioning of the fuel handling systems and for the training of staff for operation and maintenance of these systems. The paper also reviews the commissioning programme, describing the milestones achieved and discussing some of the more interesting technical aspects which includes some unique Romanian input. In conclusion the paper looks at the organization of the mature fuel handling department from the operations, maintenance and technical support points of view and the long term plans for the future. (author). 1 fig.

Fuel handling at Cernavoda 1 N.P.S. - commissioning and training philosophy

International Nuclear Information System (INIS)

Standen, G.W.; Tiron, C.; Marinescu, S.

1996-01-01

Efficient operation of a Candu nuclear power plant depends greatly on the reliable and safe operation of the fuel handling system. Successful commissioning of the system is obviously a key aspect of the reliability of the system and this coupled with a rigorous training programme for the fuel handling staff will ensure the system's safe operation. This paper describes the philosophy used at Cernavoda 1 N.P.S. for the commissioning of the fuel handling systems and for the training of staff for operation and maintenance of these systems. The paper also reviews the commissioning programme, describing the milestones achieved and discussing some of the more interesting technical aspects which includes some unique Romanian input. In conclusion the paper looks at the organization of the mature fuel handling department from the operations, maintenance and technical support points of view and the long term plans for the future. (author). 1 fig

Handling, conditioning and disposal of spent sealed sources

International Nuclear Information System (INIS)

1990-02-01

The series entitled ''Technical Manual for the Management of Low and Intermediate Level Wastes Generated at Small Nuclear Research Centres and by Radioisotope Users in Medicine, Research and Industry'' will serve as reference material to experts on technical assistance missions and provide ''direct know-how'' for technical staff in developing countries. This document is the first in the series. It provides the technical guidance and know-how necessary to permit developing Member States to safely handle, condition and store spent sealed radiation sources. It covers: characterization of sealed sources, legislation and regulations, management of spent sealed sources, transportation and disposal of spent sealed sources. 5 refs, 10 figs, 6 tabs

World Wide Comparism of Technical and Vocational Education: Lessons for Nigerian Technical and Vocational Education Sector (I)

Science.gov (United States)

Ayeni, Abiodun Olumide

2015-01-01

This paper compared technical/vocational education in: Germany, Australia, Finland, Hong Kong, Hungary, India, Japan, South Korea, Mexico, and Nigeria, and found that technical/vocational education was given proper attention in countries considered except Nigeria, where it was handled with laissez faire attitude. Set-Up of Technical/Vocational…

Technical Network

CERN Multimedia

2007-01-01

In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

Uncertainty and Risk Management in Cyber Situational Awareness

Science.gov (United States)

Li, Jason; Ou, Xinming; Rajagopalan, Raj

Handling cyber threats unavoidably needs to deal with both uncertain and imprecise information. What we can observe as potential malicious activities can seldom give us 100% confidence on important questions we care about, e.g. what machines are compromised and what damage has been incurred. In security planning, we need information on how likely a vulnerability can lead to a successful compromise to better balance security and functionality, performance, and ease of use. These information are at best qualitative and are often vague and imprecise. In cyber situational awareness, we have to rely on such imperfect information to detect real attacks and to prevent an attack from happening through appropriate risk management. This chapter surveys existing technologies in handling uncertainty and risk management in cyber situational awareness.

Uranium hexafluoride handling

International Nuclear Information System (INIS)

1991-01-01

The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF 6 from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride

Safety issues in robotic handling of nuclear weapon parts

International Nuclear Information System (INIS)

Drotning, W.; Wapman, W.; Fahrenholtz, J.

1993-01-01

Robotic systems are being developed by the Intelligent Systems and Robotics Center at Sandia National Laboratories to perform automated handling tasks with radioactive weapon parts. These systems will reduce the occupational radiation exposure to workers by automating operations that are currently performed manually. The robotic systems at Sandia incorporate several levels of mechanical, electrical, and software safety for handling hazardous materials. For example, tooling used by the robot to handle radioactive parts has been designed with mechanical features that allow the robot to release its payload only at designated locations in the robotic workspace. In addition, software processes check for expected and unexpected situations throughout the operations. Incorporation of features such as these provides multiple levels of safety for handling hazardous or valuable payloads with automated intelligent systems

IFMIF - Layout and arrangement of cells according to requirements of technical logistics, reliability and remote handling

Energy Technology Data Exchange (ETDEWEB)

Mittwollen, Martin, E-mail: martin.mittwollen@kit.edu [Karlsruhe Institute of Technology, Institute for Conveying Technology and Logistics, Karlsruhe (Germany); Eilert, Dirk; Kubaschewski, Martin; Madzharov, Vladimir [Karlsruhe Institute of Technology, Institute for Conveying Technology and Logistics, Karlsruhe (Germany); Tian Kuo [Karlsruhe Institute of Technology, Institute for Neutron Physics and Reactor Technology, Karlsruhe (Germany)

2012-08-15

Highlights: Black-Right-Pointing-Pointer In a first approach, layout and arrangement of the cells followed a predetermined plant layout. Black-Right-Pointing-Pointer Disadvantages in technical logistics, reliability and remote handling have been detected. Black-Right-Pointing-Pointer Deliberation with project teams opened space for improvements. Black-Right-Pointing-Pointer Layout and arrangement of cells have been improved by simplification of design. Black-Right-Pointing-Pointer Speed and reliability have been increased significantly. - Abstract: The International Fusion Material Irradiation Facility (IFMIF) is designed to study and qualify structural and functional materials which shall be used in future fusion nuclear power plants. During the current engineering validation and engineering design activities (EVEDA) phase the development of e.g. an optimized layout and arrangement of the cells (Access Cell, Test Cell, and Test Module Handling Cells) is of major interest. After defining different functions for the individual cells like e.g. large scale/fine scale disassembling of test modules a first layout has been developed. This design followed requirements like having a minimum of carrier changes to avoid sources of failures. On the other hand it has had to be a compact arrangement of cells due to restrictions from plant layout. A row of changes of transfer direction, and different crane systems were the consequence. Constructive discussion with project team results in the statement, that for reasons of being reliable and fast, layout and arrangement of cells goes first, plant layout then will follow. The chance for big improvements was taken and the result was a simplified design with strong reduced number of functional elements, and increased reliability and speed.

Crusader solid propellant best technical approach

Energy Technology Data Exchange (ETDEWEB)

Graves, V. [Oak Ridge National Lab., TN (United States); Bader, G. [Fire Support Armament Center, Picatinny Arsenal, NJ (United States); Dolecki, M. [Tank-Automotive Research, Development, and Engineering Center, Picatinny, NJ (United States); Krupski, S. [Benet Weapons Lab., Watervliet Arsenal, NY (United States); Zangrando, R. [Close Combat Armament Center, Picatinny Arsenal, NJ (United States)

1995-12-01

The goal of the Solid Propellant Resupply Team is to develop Crusader system concepts capable of automatically handling 155mm projectiles and Modular Artillery Charges (MACs) based on system requirements. The system encompasses all aspects of handling from initial input into a resupply vehicle (RSV) to the final loading into the breech of the self-propelled howitzer (SPH). The team, comprised of persons from military and other government organizations, developed concepts for the overall vehicles as well as their interior handling components. An intermediate review was conducted on those components, and revised concepts were completed in May 1995. A concept evaluation was conducted on the finalized concepts, from both a systems level and a component level. The team`s Best Technical Approach (BTA) concept was selected from that evaluation. Both vehicles in the BTA have a front-engine configuration with the crew situated behind the engine-low in the vehicles. The SPH concept utilizes an automated reload port at the rear of the vehicle, centered high. The RSV transfer boom will dock with this port to allow automated ammunition transfer. The SPH rearm system utilizes fully redundant dual loaders. Active magazines are used for both projectiles and MACs. The SPH also uses a nonconventional tilted ring turret configuration to maximize the available interior volume in the vehicle. This configuration can be rearmed at any elevation angle but only at 0{degree} azimuth. The RSV configuration is similar to that of the SPH. The RSV utilizes passive storage racks with a pick-and-place manipulator for handling the projectiles and active magazines for the MACs. A telescoping transfer boom extends out the front of the vehicle over the crew and engine.

IFMIF – Layout and arrangement of cells according to requirements of technical logistics, reliability and remote handling

International Nuclear Information System (INIS)

Mittwollen, Martin; Eilert, Dirk; Kubaschewski, Martin; Madzharov, Vladimir; Tian Kuo

2012-01-01

Highlights: ► In a first approach, layout and arrangement of the cells followed a predetermined plant layout. ► Disadvantages in technical logistics, reliability and remote handling have been detected. ► Deliberation with project teams opened space for improvements. ► Layout and arrangement of cells have been improved by simplification of design. ► Speed and reliability have been increased significantly. - Abstract: The International Fusion Material Irradiation Facility (IFMIF) is designed to study and qualify structural and functional materials which shall be used in future fusion nuclear power plants. During the current engineering validation and engineering design activities (EVEDA) phase the development of e.g. an optimized layout and arrangement of the cells (Access Cell, Test Cell, and Test Module Handling Cells) is of major interest. After defining different functions for the individual cells like e.g. large scale/fine scale disassembling of test modules a first layout has been developed. This design followed requirements like having a minimum of carrier changes to avoid sources of failures. On the other hand it has had to be a compact arrangement of cells due to restrictions from plant layout. A row of changes of transfer direction, and different crane systems were the consequence. Constructive discussion with project team results in the statement, that for reasons of being reliable and fast, layout and arrangement of cells goes first, plant layout then will follow. The chance for big improvements was taken and the result was a simplified design with strong reduced number of functional elements, and increased reliability and speed.

The gas cushion technique as a handling means for the remote removal of tokamak segments

International Nuclear Information System (INIS)

Removille, J.; Stephano, R.

1983-01-01

The gas cushion technique has been studied as offering a compact, flexible and safe way of handling massive objects. The evolution of the gas-cushion handling philosophy is discussed and examples presented related to the displacements of different loads in the torus and in the reactor hall. A short technical comparison with the C-frame handling concept is made in the conclusion. (author)

Qualification of the plans of forest handling as instruments for the sustainable use of the natural forests in Colombia

International Nuclear Information System (INIS)

Linares Prieto, Ricardo; Avendano Reyes Jeimmy

2001-01-01

The handling and sustainable use of the forest ecosystems of the country is one of the purposes of the politicians from Colombia, in particular, and of the world in general; and the forest handling plans (PMF) they are constituted in one of the existent technical and legal instruments for its administration. However, the current national situation as for the use and conservation of the natural forests points out that the PMF is not completing its function and that they suffer of a hypothetical suitability lack for such ends. With base in the previous situation, it decided to carry out this investigation that was guided to evaluate and to determine the suitability of the PMF and the corresponding forest inventories, as instruments to plan and to carry out the handling and the use of the natural forests in Colombia, taking like case study; the Municipalities of Olaya Herrera, Francisco Pizarro, Mosquera, Roberto Payan and Magui, in the pacific coast of the Narino Department, that is one of the main areas of forest use in the country and supplying of an important volume of wood for the national industry, reason for which the use of the local forests is there the main productive activity of the black communities seated. The study was carried out during a lapse of six months, including two months of field work, in the mark of the Project: Application and Evaluation of Approaches and Indicators for the sustainable ordination of the natural forests, carried out under the auspices of the Ministry of the environment of Colombia and the International Organization of Tropical Wood - IOTW

'Oh my God, I can't handle this!': trainees' emotional responses to complex situations.

Science.gov (United States)

Helmich, Esther; Diachun, Laura; Joseph, Radha; LaDonna, Kori; Noeverman-Poel, Nelleke; Lingard, Lorelei; Cristancho, Sayra

2018-02-01

Dealing with emotions is critical for medical trainees' professional development. Taking a sociocultural and narrative approach to understanding emotions, we studied complex clinical situations as a specific context in which emotions are evoked and influenced by the social environment. We sought to understand how medical trainees respond to emotions that arise in those situations. In an international constructivist grounded theory study, 29 trainees drew two rich pictures of complex clinical situations, one exciting and one frustrating. Rich pictures are visual representations that capture participants' perceptions about the people, situations and factors that create clinical complexity. These pictures were used to guide semi-structured, individual interviews. We analysed visual materials and interviews in an integrated way, starting with looking at the drawings, doing a 'gallery walk', and using the interviews to inform the aesthetic analysis. Participants' drawings depicted a range of personal emotions in response to complexity, and disclosed unsettling feelings and behaviours that might be considered unprofessional. When trainees felt confident, they were actively participating, engaged in creative problem-solving strategies, and emphasised their personal involvement. When trainees felt the situation was beyond their control, they described how they were running away from the situation, hiding themselves behind others or distancing themselves from patients or families. A sense of control seems to be a key factor influencing trainees' emotional and behavioural responses to complexity. This is problematic, as complex situations are by their nature emergent and dynamic, which limits possibilities for control. Following a social performative approach to emotions, we should help students understand that feeling out of control is an inherent property of participating in complex clinical situations, and, by extension, that it is not something they will 'grow out of

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

Science.gov (United States)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

KBS Annual Report 1983. Including summaries of technical reports issued during 1983

International Nuclear Information System (INIS)

1984-06-01

The purpose of the KBS Annual Report is to inform interested organizations and individuals of the research and development work performed by the division KBS within the Swedish Nuclear Fuel Supply Co (SKBF) on the handling, treatment and final storage of nuclear wastes in Sweden. The Annual Report normally contains a presentation of the legal and organizational situation followed by an account of the progress within different areas of the R and D-work. This account also includes indications of the activities planned for the future. At the end of the report the summaries of 76 technical reports and other publications issued during the year are listed in special appendices. (K.A.E.)

Conceptual design report for a remotely operated cask handling system. Revision 1

International Nuclear Information System (INIS)

Yount, J.A.; Berger, J.D.

1984-09-01

Recent advances in remote handling utilizing commercial robotics are conceptually applied to lowering operator cumulative radiation exposure and increasing throughput during cask handling operations in nuclear shipping and receiving facilities. Revision 1 incorporates functional criteria for facility equipment, equipment technical outline specifications, and interface control drawings to assist Architect Engineers in the application of remote handling to waste shipping and receiving facilities. The document has also been updated to show some of the equipment used in proof-of-principle testing during fiscal year 1984. 10 references, 50 figures, 1 table

Hand sanitizer-dispensing door handles increase hand hygiene compliance: a pilot study.

Science.gov (United States)

Babiarz, Lukasz S; Savoie, Brent; McGuire, Mark; McConnell, Lauren; Nagy, Paul

2014-04-01

Improving rates of hand hygiene compliance (HHC) has been shown to reduce nosocomial disease. We compared the HHC for a traditional wall-mounted unit and a novel sanitizer-dispensing door handle device in a hospital inpatient ultrasound area. HHC increased 24.5%-77.1% (P sanitizer-dispensing door handle, whereas it remained unchanged for the other rooms. Technical improvements like a sanitizer-dispensing door handle can improve hospital HHC. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Radiofrequency Identification by using Drones in Railway Accidents and Disaster Situations

Directory of Open Access Journals (Sweden)

Géza Károly Kiss Leizer

2017-06-01

Full Text Available Today, railway operation procedures include the transportation of large amount of hazardous substances. Our research has been motivated by the desire to find concrete and urgent solutions to the safety issues of handling waste generated manly in case of accidents and disaster situations during the transportation of hazardous substances In order to ensure safety in the transportation of dangerous goods, and to facilitate the fast and efficient waste handling of hazardous substances released into the environment during unexpected events, we have elaborated a new method, in which we suggest the radiofrequency identification of dangerous consignments in case of disaster situations by the use of drones.

The training for nuclear fuel handling at EDF

International Nuclear Information System (INIS)

Marion, J.P.

1999-01-01

The handling of fuel assemblies in a nuclear power plant presents 3 types of work: the taking delivery of fresh fuel, the refueling and the disposal of spent fuel. These operations are realized by teams made up of 3 handling operators and a supervisor. The refueling is made by 3*8-hour teams. These handling operations are important for the nuclear safety, a mishandling can damage the fuel cladding which is the first containment barrier, so a training center (CETIC) has been created. This center was founded in 1986 by EDF and Framatome, the purpose was to validate maintenance procedures, to test handling equipment and to train the teams which work on site. Various training programmes have been set up and a system of qualification degrees has been organized. The CETIC is fitted up with equipment that are full-sized mockups of real installations. Fuel assemblies don't react in a similar way to the different mechanical and neutronic stresses they undergo while they are in the core, they get deformed and the handling operations become more delicate. The mockup fuel assemblies are quite deformed to train the teams and prepare them to face any real situation. (A.C.)

Handling nuclear waste over long periods

International Nuclear Information System (INIS)

Ancelin, B.; Chenevier, E.

1983-01-01

The handling of nuclear waste over long periods throws up new problems, such as the safety for a very long term and the employment of economic logic in order to justify choices involving extended time scales. The result is a very great difficulty of apprehension of the problem by the specialists as well as by the public. A clear policy decision, associated with a coherent administrative organization, will therefore have to make up for an impossible technical-economical optimization of the various possible options. The difficulty of simple technical choices is only going to reinforce this wish; the absence of a global and comparative measuring system is responsible for the fact that in this field the passions often override many of the scientific truths [fr

Pre-disposal storage, transport and handling of vitrified high level waste

International Nuclear Information System (INIS)

Kempe, T.F.; Martin, A.

1981-05-01

The objectives of the study were to review non site-specific engineering features of the storage, transport and handling of vitrified high level radioactive waste prior to its transfer into an underground repository, and to identify those features which require validation or development. Section headings are: introduction (historical and technical background); characteristics and arisings of vitrified high level waste; overpacks (additional containment barrier, corrosion resistant); interim storage of HLW; transport of HLW; handling; conclusions and recommendations. (U.K.)

The handling of nuclear emergencies in Argentina

International Nuclear Information System (INIS)

Hernandez, Daniel; Jordan, Osvaldo; Kunst, Juan; Bruno, Hector

2008-01-01

Full text: In 1998, the Executive signed the decree 1390, which defined the scope and the procedures corresponding to the Nuclear Activity Law. In this decree, the new functions of the Nuclear Regulatory Authority (ARN) are described, being the most important related to preparation and response for a nuclear emergency the following ones: 1) ARN must provide protection from harmful effects of ionizing radiations under normal conditions and emergency situations; 2) ARN must advise the Executive in case of radiological and nuclear emergencies; 3) ARN shall establish the criteria for the emergency plans of the facilities and train the members of neighbor public to the facilities in case of nuclear emergencies; 4) The emergency plans developed by local, provincial and national authorities must be approved by the ARN; 5) ARN shall lead the actions within the area covered by the emergency plans of the facilities. Security Forces and the Representatives of Civil Institutions shall report the designated ARN officer. The ARN recognized immediately the responsibility imposed by this law and, at the same time, the opportunity of improving the handling of emergencies through a centralized direction of the operations. Under this frame, ARN created the Radiological Emergencies Intervention System (SIER) with the goal of taking charge of the preparation and the handling of emergency situations. From the beginning, the purpose of the SIER was to improve the preparation and response to nuclear emergencies in a regular form, bearing in mind the cultural and socioeconomic situation of the country, as well as the local peculiarities. The first steep to achieve such a target was to gain the confidence of other organizations included in the response on the ARN technical and operational aptitude to lead the actions inside the emergency area and, later, to establish the pertinent arrangements. The strategy chosen by ARN to respond to nuclear emergencies consists in establishing an expert

Report on the basic design of the FY 1998 technical information database; 1998 nendo gijutsu joho database no kihon sekkei hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of promoting the effective transfer of the results of technical development and the technical information distribution, study and basic design were conducted of a concept of the new technical database run by NEDO. In the study, the following were conducted to extract the subjects: analysis of examples of project databases such as CADDET, scientific technology research information (JCLEARING), evaluation/survey of the present situation of database users, etc. In the study of a concept of technical information database, clarified were the classification of information, definition of the details, finding-out of relations between various kinds of information, mechanism of collection/processing/storage/dispatch/exchange of information, role of NEDO, etc. In the basic design, as the NEDO technical information database viable for the moment, the rough design was conducted of the project information, information on result reports, and information on research institutes. Further, to handle in unity the database controlled in different method, studied were the applicability to the project database of the general combined concept, advantages, restricted items, etc. (NEDO)

The Impact of a Qualitative Research Interview on Workers' Views of Their Situation

Science.gov (United States)

Butterfield, Lee D.; Borgen, William A.; Amundson, Norman E.

2009-01-01

The purpose of this research was to explore whether qualitative research interviews impacted participants' views of their situations. Forty-five workers who reported handling well changes that affected their work were interviewed to explore their experiences of change, factors that helped and hindered their ability to handle change, and assess the…

The layperson in emergency situations

OpenAIRE

Pergola, AM; Araujo, IEM

2008-01-01

The layperson's qualification to provide early care in emergency situations and basic life support (BLS) is fundamental to save lives and prevent sequels. The objective was to identify the level of knowledge of lay people about approaching an emergency victim. Structured interviews in non-technical language were used with a 385-subject sample, average age 35.4 (+/- 14.55) years, with more than 50% having a high school or university education. Over 55% of these observed situations with loss of...

Ecological and technical situation of flooded oil wells in Kazakhstan

International Nuclear Information System (INIS)

Kuterbekov, K. A.; Kabdrakhimova, G. D.; Nurakhmetov, T. N.; Zhaksigulova, A.; Nukenov, D. N.; Kushkimbaev, B. M.; Nurmukhanbetova, A. K.

2012-01-01

The data of ecological and technical condition of flooded and inundated wells in Atyrau and Mangystau regions of the West of Kazakhstan is given in this abstract. There is necessary to elaborate methods for liquidation, individual plans of conservations, to produce isolating and liquidation procedures on wells and to estimate environment effects. Also we will provide for estimation technical condition of conservation oil wells on territory of flooded by Caspian sea. (Authors)

Uranium hexafluoride handling. Proceedings

Energy Technology Data Exchange (ETDEWEB)

1991-12-31

The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.

Normalization and Personalization of Learning Situation: NPLS

Directory of Open Access Journals (Sweden)

Mounia Abik

2009-06-01

Full Text Available The personalization of learning is a major pedagogical challenge solicited by pedagogues and didacts. There are several projects about the production of personalizable learning situations such as Reload-LDE and Alfanet. These projects are interested in producing new standardized and personalizable learning situations. However, on the Web, an important number of learning situations exist. These situations are rich in information but don't consider all the characteristics of participants taking part in the learning, nor their technical environments. In this paper we suggest a help system that can transform an existing learning situation to another structure standardized and personalizable depending on the context of learning personalization that we have defined.

Digital map and situation surface: a team-oriented multidisplay workspace for network enabled situation analysis

Science.gov (United States)

Peinsipp-Byma, E.; Geisler, Jürgen; Bader, Thomas

2009-05-01

System concepts for network enabled image-based ISR (intelligence, surveillance, reconnaissance) is the major mission of Fraunhofer IITB's applied research in the area of defence and security solutions. For the TechDemo08 as part of the NATO CNAD POW Defence against terrorism Fraunhofer IITB advanced a new multi display concept to handle the shear amount and high complexity of ISR data acquired by networked, distributed surveillance systems with the objective to support the generation of a common situation picture. Amount and Complexity of ISR data demands an innovative man-machine interface concept for humans to deal with it. The IITB's concept is the Digital Map & Situation Surface. This concept offers to the user a coherent multi display environment combining a horizontal surface for the situation overview from the bird's eye view, an attached vertical display for collateral information and so-called foveatablets as personalized magic lenses in order to obtain high resolved and role-specific information about a focused areaof- interest and to interact with it. In the context of TechDemo08 the Digital Map & Situation Surface served as workspace for team-based situation visualization and analysis. Multiple sea- and landside surveillance components were connected to the system.

Technical session 4: Health and safety issues. Working environment control in beryllium handling area

International Nuclear Information System (INIS)

Yonehara, K.; Natori, Y.; Tatenuma, K.; Nakamichi, Masaru

2016-01-01

Beryllium (Be) and its intermetallic compound (beryllide) are recommended from Japan as the most promising solid neutron multiplier for nuclear fusion power plant. The shape as the neutron multiplier is small sphere (pebble), and the mass production technology of it must be developed urgently. Beryllium is the substance regulated by the law of Ordinance on Prevention of Hazards Due to Specified the Chemical Substances Control. We'll report on a way of the operational environmental management to make a safe Be handling area for the Be handling researchers and workers. (author)

Technical risks viewed from a legal point of view

International Nuclear Information System (INIS)

Marburger, P.

1985-01-01

Law has to impose restrictions to technology to assure its general compatibility. The difficult problems of handling technical risks by legislation are solvable. The scientific-technical knowledge which is a prerequisite of legislation is obtainable from the technical standards worked out by private organisations and from bodies of experts under public law. The system of law must not antagonize technology. (HP) [de

Handling of tritium-bearing wastes

International Nuclear Information System (INIS)

1981-01-01

The generation of nuclear power and reprocessing of nuclear fuel results in the production of tritium and the possible need to control the release of tritium-contaminated effluents. In assessing the need for controls, it is necessary to know the production rates of tritium at different nuclear facilities, the technologies available for separating tritium from different gaseous and liquid streams, and the methods that are satisfactory for storage and disposal of tritiated wastes. The intention in applying such control technologies and methods is to avoid undesirable effects on the environment, and to reduce the radiation burden on operational personnel and the general population. This technical report is a result of the IAEA Technical Committee Meeting on Handling of Tritium-bearing Effluents and Wastes, which was held in Vienna, 4 - 8 December 1978. It summarizes the main topics discussed at the meeting and appends the more detailed reports on particular aspects that were prepared for the meeting by individual participants

Diagnostic orientation in control of disturbance situations

International Nuclear Information System (INIS)

Hukki, K.; Norros, L.

1993-01-01

The object of the study is diagnostic judgement in the control of dynamic processes. The starting point was the known difficulty process operators have in utilizing knowledge of process dynamics in disturbance situations that require both diagnostic and prognostic actions. A model of the diagnostic judgement process as a construction of coherent interpretation of the situation is outlined, and comprehensive data from simulated disturbance handling by 6 crews of a PWR type nuclear power plant was analysed. The phase of analysis included evaluation of the adequacy of task performance, utilization of available process information, and evaluation of the interpretation of disturbance situations. The results suggest that a functional orientation towards task performance allows a more coherent and comprehensive interpretation of the situation and more adequate task performance. Coherence of interpretation seems to be reflected in a higher subjective certainty compared with crews with an incoherent interpretation. (author). 15 refs, 2 figs, 2 tabs

Handling and processing of radioactive waste from nuclear applications

International Nuclear Information System (INIS)

2001-01-01

The main objective of this report is to provide technical information and reference material on different steps and components of radioactive waste management for staff in establishments that use radionuclides and in research centres in Member States. It provides technical information on the safe handling, treatment, conditioning and storage of waste arising from the various activities associated with the production and application of radioisotopes in medical, industrial, educational and research facilities. The technical information cited in this report consists mainly of processes that are commercialised or readily available, and can easily be applied as they are or modified to solve specific waste management requirements. This report covers the sources and characteristics of waste and approaches to waste classification, and describes the particular processing steps from pretreatment until storage of conditioned packages

Year-end technical stop: train to work safely

CERN Multimedia

Rosaria Marraffino

2016-01-01

As mentioned in the previous issue of the Bulletin (see here), the accelerators are currently undergoing maintenance as part of the year-end technical stop (YETS). Hundreds of people are working simultaneously on different machines, and many of them need to be trained in order to work safely underground. From a Safety Training point of view, this has resulted in a significant increase in training requests, most of them at the last minute, which are now being handled – but not without difficulties.     In the LHC mock-up, a helium leak is simulated. In this stressful situation, the trainees learn how to put their mask on in less than 40 seconds.   "The most requested course is the Self-Rescue Mask classroom training,” explains Christoph Balle, Safety Training Section Leader. “In this course, people are trained to face the oxygen deficiency hazards that may occur in CERN's underground areas, learning...

Development of spent fuel remote handling technology

International Nuclear Information System (INIS)

Yoon, Ji Sup; Park, B. S.; Park, Y. S.; Oh, S. C.; Kim, S. H.; Cho, M. W.; Hong, D. H.

1997-12-01

Since the nation's policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

Resource Management in Constrained Dynamic Situations

Science.gov (United States)

Seok, Jinwoo

Resource management is considered in this dissertation for systems with limited resources, possibly combined with other system constraints, in unpredictably dynamic environments. Resources may represent fuel, power, capabilities, energy, and so on. Resource management is important for many practical systems; usually, resources are limited, and their use must be optimized. Furthermore, systems are often constrained, and constraints must be satisfied for safe operation. Simplistic resource management can result in poor use of resources and failure of the system. Furthermore, many real-world situations involve dynamic environments. Many traditional problems are formulated based on the assumptions of given probabilities or perfect knowledge of future events. However, in many cases, the future is completely unknown, and information on or probabilities about future events are not available. In other words, we operate in unpredictably dynamic situations. Thus, a method is needed to handle dynamic situations without knowledge of the future, but few formal methods have been developed to address them. Thus, the goal is to design resource management methods for constrained systems, with limited resources, in unpredictably dynamic environments. To this end, resource management is organized hierarchically into two levels: 1) planning, and 2) control. In the planning level, the set of tasks to be performed is scheduled based on limited resources to maximize resource usage in unpredictably dynamic environments. In the control level, the system controller is designed to follow the schedule by considering all the system constraints for safe and efficient operation. Consequently, this dissertation is mainly divided into two parts: 1) planning level design, based on finite state machines, and 2) control level methods, based on model predictive control. We define a recomposable restricted finite state machine to handle limited resource situations and unpredictably dynamic environments

Technical Education and Economic Growth

Indian Academy of Sciences (India)

First page Back Continue Last page Graphics. Technical Education and Economic Growth. Technical Education and Economic Growth. Review of the Present Status. Expanding no.s and impairment of quality; Faculty shortage; Grim situation at Masters and PhD levels; Regional imbalance; Absence of International flavour ...

The use of virtual reality for preparation and implementation of JET remote handling operations

International Nuclear Information System (INIS)

Sanders, S.; Rolfe, A.C.

2003-01-01

The use of real time 3-D computer graphic models for preparation and support of remote handling operations on JET has been in use since the mid 1980s. A complete review has been undertaken of the functional requirements and benefits of VR for remote handling and a subsequent market survey of the present state-of-the-art of VR systems has resulted in the implementation of a new system for JET. The VR system is used in two discrete modes: in on-line mode the remote handling equipment Electro-mechanical hardware is connected to the VR system and provides input for the VR system to update a real time 3-D display of the equipment inside the torus. This mode supplements the video camera system and assists with camera control and warnings of impending or potential collisions. In Off-line mode the operator manipulates the VR system model with no connections to the remote handling equipment. This mode is used during preparation of RH operational strategies, checking of operational feasibility and operations procedures. Various VR systems were evaluated against a detailed technical specification that covered visualisation function and performance, user interface design and base model input/creation capabilities. The cheapest of those systems that satisfied the technical requirements was selected

Vestibule and Cask Preparation Mechanical Handling Calculation

International Nuclear Information System (INIS)

Ambre, N.

2004-01-01

The scope of this document is to develop the size, operational envelopes, and major requirements of the equipment to be used in the vestibule, cask preparation area, and the crane maintenance area of the Fuel Handling Facility. This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAIC Company L.L.C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC--28-01R W12101'' (Ref. 167124). This correspondence was appended by further correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC--28-01R W12101; TDL No. 04-024'' (Ref. 16875 1). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process

SIMULATION OF DRIVER’S LOCOMOTIVE-HANDLING ACTIVITY USING THE THEORY OF FUZZY GRAPHS

Directory of Open Access Journals (Sweden)

T. V. Butko

2015-03-01

Full Text Available Purpose. The efficiency and safety of locomotive control improving is important and relevant scientific and practical problem. Every driver during the trains-handling bases on his experience and knowledge, that is why the compilation and detection the most efficient ways to control the locomotive-handling is one of the stages of measures development to reduce transportation costs. The purpose of this paper is a formalization process description of locomotive-handling and quality parameters determination of this process. Methodology. In order to achieve this goal the theory of fuzzy probabilistic graphs was used. Vertices of the graph correspond to the events start and end operations at train-handling. The graph arcs describe operations on train-handling. Graph consists of thirteen peaks corresponding to the main control actions of the engine-driver. The weighting factors of transitions between vertices are assigned by fuzzy numbers. Their values were obtained by expert estimates. Fuzzy probabilities and transition time are presented as numbers with trapezoidal membership function. Findings. Using successive merging of parallel arcs, loops and vertices elimination, the equivalent fuzzy graph of train-handling and the corresponding L-matrix were obtained. Equivalent graph takes into account separately activity of the driver during normal operation and during emergency situations. Originality. The theoretical foundations of describing process formalization in driver’s locomotive-handling activity were developed using the fuzzy probabilistic graph. The parameters characterizing the decision-making process of engineer were obtained. Practical value. With the resulting model it is possible to estimate the available reserves for the quality improvement of locomotive-handling. Reduction in the time for decision-making will lead to the approximation the current mode of control to the rational one and decrease costs of hauling operations. And reduction

Texas situation

International Nuclear Information System (INIS)

Avant, R.V. Jr.; Bowmer, W.J.

1986-01-01

The Texas Low-Level Radioactive Waste Disposal Authority was formed in 1981 to address the Texas low-level radioactive waste problem consistent with the direction of P.L. 96-573. The Authority has completed technical tasks, including source term evaluations, preliminary conceptual designs, economic assessments, and long-range planning, and has work in progress on facility design, site selection, operating procedures, and licensing. Site selection has been the major technical activity and will be completed in 1987 after on-site evaluations of potential sites. The Authority expects to have its site licensed and operating in 1992. Texas has been the leader in site selection. Political concerns and the uncertainty of the national agenda led Texas policy makers to slow down the state's progress. The lessons learned through the Texas situation should be instructive to other states and compacts and may well be a prediction of events for these other groups. This paper discusses the background and status of Texas development activities, future plans, and lessons learned

Fuel handling and storage systems in nuclear power plants

International Nuclear Information System (INIS)

1984-01-01

The scope of this Guide includes the design of handling and storage facilities for fuel assemblies from the receipt of fuel into the nuclear power plant until the fuel departs from that plant. The unirradiated fuel considered in this Guide is assumed not to exhibit any significant level of radiation so that it can be handled without shielding or cooling. This Guide also gives limited consideration to the handling and storage of certain core components. While the general design and safety principles are discussed in Section 2 of this Guide, more specific design requirements for the handling and storage of fuel are given in detailed sections which follow the general design and safety principles. Further useful information is to be found in the IAEA Technical Reports Series No. 189 ''Storage, Handling and Movement of Fuel and Related Components at Nuclear Power Plants'' and No. 198 ''Guide to the Safe Handling of Radioactive Wastes at Nuclear Power Plants''. However, the scope of the Guide does not include consideration of the following: (1) The various reactor physics questions associated with fuel and absorber loading and unloading into the core; (2) The design aspects of preparation of the reactor for fuel loading (such as the removal of the pressure vessel head for a light water reactor) and restoration after loading; (3) The design of shipping casks; (4) Fuel storage of a long-term nature exceeding the design lifetime of the nuclear power plant; (5) Unirradiated fuel containing plutonium

Classification and handling of non-conformance item of nuclear class equipment during manufacture phase

International Nuclear Information System (INIS)

Wang Ruiping

2001-01-01

Based on inspection experiences in years on nuclear class equipment manufacturing, the author discusses the classification and handling of non-conformance items occurred during equipment manufacturing, and certain technical considerations are presented

Uranium hexafluoride: Safe handling, processing, and transporting: Conference proceedings

Energy Technology Data Exchange (ETDEWEB)

Strunk, W.D.; Thornton, S.G. (eds.)

1988-01-01

This conference seeks to provide a forum for the exchange of information and ideas of the safety aspects and technical issue related to the handling of uranium hexafluoride. By allowing operators, engineers, scientists, managers, educators, and others to meet and share experiences of mutual concern, the conference is also intended to provide the participants with a more complete knowledge of technical and operational issues. The topics for the papers in the proceedings are widely varied and include the results of chemical, metallurgical, mechanical, thermal, and analytical investigations, as well as the developed philosophies of operational, managerial, and regulatory guidelines. Papers have been entered individually into EDB and ERA. (LTN)

Uranium hexafluoride: Safe handling, processing, and transporting: Conference proceedings

International Nuclear Information System (INIS)

Strunk, W.D.; Thornton, S.G.

1988-01-01

This conference seeks to provide a forum for the exchange of information and ideas of the safety aspects and technical issue related to the handling of uranium hexafluoride. By allowing operators, engineers, scientists, managers, educators, and others to meet and share experiences of mutual concern, the conference is also intended to provide the participants with a more complete knowledge of technical and operational issues. The topics for the papers in the proceedings are widely varied and include the results of chemical, metallurgical, mechanical, thermal, and analytical investigations, as well as the developed philosophies of operational, managerial, and regulatory guidelines. Papers have been entered individually into EDB and ERA

The remote handling systems for ITER

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Isabel, E-mail: mir@isr.ist.utl.pt [Institute for Systems and Robotics/Instituto Superior Tecnico, Lisboa (Portugal); Damiani, Carlo [Fusion for Energy, Barcelona (Spain); Tesini, Alessandro [ITER Organization, Cadarache (France); Kakudate, Satoshi [ITER Tokamak Device Group, Japan Atomic Energy Agency, Ibaraki (Japan); Siuko, Mikko [VTT Systems Engineering, Tampere (Finland); Neri, Carlo [Associazione EURATOM ENEA, Frascati (Italy)

2011-10-15

The ITER remote handling (RH) maintenance system is a key component in ITER operation both for scheduled maintenance and for unexpected situations. It is a complex collection and integration of numerous systems, each one at its turn being the integration of diverse technologies into a coherent, space constrained, nuclearised design. This paper presents an integrated view and recent results related to the Blanket RH System, the Divertor RH System, the Transfer Cask System (TCS), the In-Vessel Viewing System, the Neutral Beam Cell RH System, the Hot Cell RH and the Multi-Purpose Deployment System.

Design approach for safe tritium handling in ITER

International Nuclear Information System (INIS)

Ohira, Shigeru

2002-01-01

Outlines for tritium handling and a fundamental approach for ensuring safety are presented. The amount of tritium stored and processed in the ITER facility will be much larger than that in the existing facilities for fusion research, though the processing methods and the conditions of processing (e.g., concentration, pressure, etc.) will be similar for those used in those facilities. Therefore, considerations to be taken for tritium handling, such as limitations of tritium permeation and leaks, provision of an appropriate ventilation/detritiation system for maintenance, measures to ensure mechanical integrity, etc., can be provided based on the knowledge obtained in the facilities. The Technical Advisory Committee of the Science and Technology Agency established a fundamental approach in 2000, and set out the basic safety principles and approaches as technical requirements of safety design and assessment, which were derived from the safety characteristics of the ITER plant. Sufficient prevention of accidents can be achieved by ensuring and maintaining the structural integrity of the enclosures containing radioactive materials against the loads anticipated during operation, and a low hazard potential of radioactive materials, sufficiently within prescribed limits, can be maintained by the vitiation and clean-up system even if large release is postulated. (author)

Nuclear right and South Market Common : health citizen protection and environment: comparative study Mercosur situation:critical analysis Uruguay situation

International Nuclear Information System (INIS)

Puig, D

1998-01-01

The present work presents to general study on: the applications of nuclear techniques, technical fundamental for stablishment of to program of radiation protection, to comparative study legislation in radiation protection in the South Market Common (MERCOSUR)Argentina,Brazil,Paraguay,Uruguay as well as Treaties and Agreements. The author carries out a critical analysis from the situation to Institutional level in the Uruguay and it outlines some alternatives to improve the situation [es

Occlusion Handling in Videos Object Tracking: A Survey

International Nuclear Information System (INIS)

Lee, B Y; Liew, L H; Cheah, W S; Wang, Y C

2014-01-01

Object tracking in video has been an active research since for decades. This interest is motivated by numerous applications, such as surveillance, human-computer interaction, and sports event monitoring. Many challenges related to tracking objects still remain, this can arise due to abrupt object motion, changing appearance patterns of objects and the scene, non-rigid object structures and most significant are occlusion of tracked object be it object-to-object or object-to-scene occlusions. Generally, occlusion in object tracking occur under three situations: self-occlusion, inter-object occlusion by background scene structure. Self-occlusion occurs most frequently while tracking articulated objects when one part of the object occludes another. Inter-object occlusion occurs when two objects being tracked occlude each other whereas occlusion by the background occurs when a structure in the background occludes the tracked objects. Typically, tracking methods handle occlusion by modelling the object motion using linear and non-linear dynamic models. The derived models will be used to continuously predicting the object location when a tracked object is occluded until the object reappears. Example of these method are Kalman filtering and Particle filtering trackers. Researchers have also utilised other features to resolved occlusion, for example, silhouette projections, colour histogram and optical flow. We will present some result from a previously conducted experiment when tracking single object using Kalman filter, Particle filter and Mean Shift trackers under various occlusion situation in this paper. We will also review various other occlusion handling methods that involved using multiple cameras. In a nutshell, the goal of this paper is to discuss in detail the problem of occlusion in object tracking and review the state of the art occlusion handling methods, classify them into different categories, and identify new trends. Moreover, we discuss the important

Occlusion Handling in Videos Object Tracking: A Survey

Science.gov (United States)

Lee, B. Y.; Liew, L. H.; Cheah, W. S.; Wang, Y. C.

2014-02-01

Object tracking in video has been an active research since for decades. This interest is motivated by numerous applications, such as surveillance, human-computer interaction, and sports event monitoring. Many challenges related to tracking objects still remain, this can arise due to abrupt object motion, changing appearance patterns of objects and the scene, non-rigid object structures and most significant are occlusion of tracked object be it object-to-object or object-to-scene occlusions. Generally, occlusion in object tracking occur under three situations: self-occlusion, inter-object occlusion by background scene structure. Self-occlusion occurs most frequently while tracking articulated objects when one part of the object occludes another. Inter-object occlusion occurs when two objects being tracked occlude each other whereas occlusion by the background occurs when a structure in the background occludes the tracked objects. Typically, tracking methods handle occlusion by modelling the object motion using linear and non-linear dynamic models. The derived models will be used to continuously predicting the object location when a tracked object is occluded until the object reappears. Example of these method are Kalman filtering and Particle filtering trackers. Researchers have also utilised other features to resolved occlusion, for example, silhouette projections, colour histogram and optical flow. We will present some result from a previously conducted experiment when tracking single object using Kalman filter, Particle filter and Mean Shift trackers under various occlusion situation in this paper. We will also review various other occlusion handling methods that involved using multiple cameras. In a nutshell, the goal of this paper is to discuss in detail the problem of occlusion in object tracking and review the state of the art occlusion handling methods, classify them into different categories, and identify new trends. Moreover, we discuss the important

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

Science.gov (United States)

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

Development of spent fuel remote handling technology

Energy Technology Data Exchange (ETDEWEB)

Yoon, Ji Sup; Park, B S; Park, Y S; Oh, S C; Kim, S H; Cho, M W; Hong, D H

1997-12-01

Since the nation`s policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

Consumer evaluation of complaint handling in the Dutch health insurance market.

Science.gov (United States)

Wendel, Sonja; de Jong, Judith D; Curfs, Emile C

2011-11-15

How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and

Consumer evaluation of complaint handling in the Dutch health insurance market

Directory of Open Access Journals (Sweden)

Wendel Sonja

2011-11-01

Full Text Available Abstract Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and

Consumer evaluation of complaint handling in the Dutch health insurance market

Science.gov (United States)

2011-01-01

Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not

A Review of Toxicity and Use and Handling Considerations for Guanidine, Guanidine Hydrochloride, and Urea.

Energy Technology Data Exchange (ETDEWEB)

Ertell, Katherine GB

2006-03-27

This is a technical report prepared for Oregon Sustainable Energy, LLC, under Agreement 06-19 with PNNL's Office of Small Business Programs. The request was to perform a review of the toxicity and safe handling of guanidine. The request was later amended to add urea. This report summarizes the toxicity data available in the scientific literature and provides an interpretation of the results and recommendations for handling these compounds.

Licence template for mobile handling and storage of radioactive substances for the nondestructive testing of materials

International Nuclear Information System (INIS)

Lange, A.; Schumann, J.; Huhn, W.

2016-01-01

The Technical Committee ''Radiation Protection'' (Fachausschuss ''Strahlenschutz'') and the Laender Committee ''X-ray ordinance'' (Laenderausschuss ''Roentgenverordnung'') have appointed a working group for the formulation of licence templates for the nationwide use of X-ray equipment or handling of radioactive substances. To date, the following licence templates have been adopted: - Mobile operation of X-ray equipment under technical radiography to the coarse structural analysis in material testing; - Mobile operation of a handheld X-ray fluorescence system; - Mobile operation of a flash X-ray system; - Operation of an X-ray system for teleradiology The licence template ''Mobile handling and storage of radioactive substances for the nondestructive testing of materials'' is scheduled for publication. The licence template ''Practices in external facilities and installations'' is currently being revised. The licence template ''Mobile handling and storage of radioactive substances for the nondestructive testing of materials'' is used as an example to demonstrate the legal framework and the results of the working group.

Climatic architecture: Situation, principles, establishment of technical policies

International Nuclear Information System (INIS)

Brejon, P.

1994-01-01

Climatic architecture, despite the efforts of its protagonists, remains nearly marginal. Nevertheless, environmental awareness is gaining ground, whether through concern for the depletion of natural resources, for global warming or for CO 2 emissions. It is only by establishing technical policies, making an effort in terms of training and research and distributing knowledge to all those in the business that the principles of climatic architecture will actually be applied in the field. Resources are available to make climatic architecture a fundamental concern in the design of environmentally friendly buildings. (author). 6 refs, 3 tabs

Conflict Resolution Automation and Pilot Situation Awareness

Science.gov (United States)

Dao, Arik-Quang V.; Brandt, Summer L.; Bacon, Paige; Kraut, Josh; Nguyen, Jimmy; Minakata, Katsumi; Raza, Hamzah; Rozovski, David; Johnson, Walter W.

2010-01-01

This study compared pilot situation awareness across three traffic management concepts. The Concepts varied in terms of the allocation of traffic avoidance responsibility between the pilot on the flight deck, the air traffic controllers, and a conflict resolution automation system. In Concept 1, the flight deck was equipped with conflict resolution tools that enable them to fully handle the responsibility of weather avoidance and maintaining separation between ownship and surrounding traffic. In Concept 2, pilots were not responsible for traffic separation, but were provided tools for weather and traffic avoidance. In Concept 3, flight deck tools allowed pilots to deviate for weather, but conflict detection tools were disabled. In this concept pilots were dependent on ground based automation for conflict detection and resolution. Situation awareness of the pilots was measured using online probes. Results showed that individual situation awareness was highest in Concept 1, where the pilots were most engaged, and lowest in Concept 3, where automation was heavily used. These findings suggest that for conflict resolution tasks, situation awareness is improved when pilots remain in the decision-making loop.

Multisensor Fusion for Intrusion Detection and Situational Awareness

OpenAIRE

Hallstensen, Christoffer V

2017-01-01

Cybercrime damage costs the world several trillion dollars annually. And al-though technical solutions to protect organizations from hackers are being con-tinuously developed, criminals learn fast to circumvent them. The question is,therefore, how to create leverage to protect an organization by improving in-trusion detection and situational awareness? This thesis seeks to contribute tothe prior art in intrusion detection and situational awareness by using a multi-sensor data fusion...

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

Science.gov (United States)

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, ptechnical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of

Report on the present day situation and technical perspectives of renewable energies; Rapport sur l'etat actuel et les perspectives techniques des energies renouvelables

Energy Technology Data Exchange (ETDEWEB)

Birraux, C; Le Deaut, J Y

2001-11-01

This work, carried out by the parliamentary office for the evaluation of scientific and technological choices on request of the French National Assembly and Senate, takes stock of the present day situation and technical perspectives of development of renewable energy sources and of research needs of the French industry in this domain: 1 - renewable energies: key-technologies for the energy supply of developing countries and for a rational consumption in transportation systems and accommodations of developed countries (energies technically different from fossil or nuclear energies; fundamental energy sources for a developing world; different national goals in Europe depending on the available natural resources and on the political realities; a minor interest in France for the domestic power generation but a major interest for transports, residential and tertiary sectors and export); 2 - priority choices given to the French renewable energy resources: renewable electricity (photovoltaic, wind, biomass), thermal technologies (solar, geothermal, biomass); 3 - future policy: sustain of renewable electricity production with the revival of research, industry and technical cooperation. (J.S.)

Process & Quality procedures for transport & handling activities

CERN Document Server

Böttcher, O

2002-01-01

To respect the detailed and complex planning of the LHC installation project it is essential to reduce possible faults in every technical service that can cause delays in the schedule. In order to ensure proper execution of transport and handling activities it is important to get detailed information from the clients as early as possible in order to do the planning and the organisation of the required resources. One procedure that requires greater focus in the future is the preparation of the resources. The goal is to prevent equipment breakdowns and accidents while executing transport and handling activities. In the LEP dismantling project multiple breakdowns of important cranes caused serious problems in the project schedule. For the LHC installation project similar incidents in the reliability of the equipment cannot be accepted because of the high sensitivity of the whole schedule. This paper shall outline the efforts and methods that are put in place in order to meet the LHC installation requirements.

Radioisotope handling facilities and automation of radioisotope production

International Nuclear Information System (INIS)

2004-12-01

If a survey is made of the advances in radioisotope handling facilities, as well as the technical conditions and equipment used for radioisotope production, it can be observed that no fundamental changes in the design principles and technical conditions of conventional manufacture have happened over the last several years. Recent developments are mainly based on previous experience aimed at providing safer and more reliable operations, more sophisticated maintenance technology and radioactive waste disposal. In addition to the above observation, significant improvements have been made in the production conditions of radioisotopes intended for medical use, by establishing aseptic conditions with clean areas and isolators, as well as by introducing quality assurance as governing principle in the production of pharmaceutical grade radioactive products. Requirements of the good manufacturing practice (GMP) are increasingly complied with by improving the technical and organizational conditions, as well as data registration and documentation. Technical conditions required for the aseptic production of pharmaceuticals and those required for radioactive materials conflicting in some aspects are because of the contrasting contamination mechanisms and due consideration of the radiation safety. These can be resolved by combining protection methods developed for pharmaceuticals and radioactive materials, with the necessary compromise in some cases. Automation serves to decrease the radiation dose to the operator and environment as well as to ensure more reliable and precise radiochemical processing. Automation has mainly been introduced in the production of sealed sources and PET radiopharmaceuticals. PC controlled technologies ensure high reliability for the production and product quality, whilst providing automatic data acquisition and registration required by quality assurance. PC control is also useful in the operation of measuring instruments and in devices used for

Recent advances in remote handling at LAMPF

International Nuclear Information System (INIS)

Lambert, J.E.; Grisham, D.L.

1985-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) has operated at beam currents above 200 microamperes since 1976. As a result, the main experimental beam line (Line A) has become increasingly radioactive over the years. Since 1976 the radiation levels have steadily increased from 100 mR/hr to levels that exceed 10,000 R/hr in the components near the pion production targets. During this time the LAMPF remote handling system, Monitor, has continued to operate successfully in the ever-increasing radiation levels, as well as with more complex remote-handling situations. This paper briefly describes the evolution of Monitor and specifically describes the complete rebuild of the A-6 target area, which is designated as the beam stop, but also includes isotope production capabilities and a primitive neutron irradiation facility. The new facility includes not only the beam stop and isotope production, but also facilities for proton irradiation and a ten-fold expansion in neutron irradiation facilities

Knowledge Communication as Situated Strategic Action

DEFF Research Database (Denmark)

Kampf, Constance

as situated strategic action through which genres are (re)formed.  The medium of the Internet offers a space where the reification of this action can be observed, and its interactive potential offers academics insight into knowledge communication processes.  Thus, we propose that Bazerman's definition......Knowledge communication is an emerging means of understanding the processes involved in constructing and passing knowledge from person to person which works together with technical communication in the knowledge society.  The concept of knowledge communication compliments technical communication...... by allowing for the interpersonal aspects of knowledge creation and diffusions.  Combing technical and knowledge communication, then, covers the three major components of the knowledge economy-creation, diffusion, and use of knowledge. In my paper I propose that we consider three approaches to understanding...

Report on the present day situation and technical perspectives of renewable energies; Rapport sur l'etat actuel et les perspectives techniques des energies renouvelables

Energy Technology Data Exchange (ETDEWEB)

Birraux, C.; Le Deaut, J.Y.

2001-11-01

This work, carried out by the parliamentary office for the evaluation of scientific and technological choices on request of the French National Assembly and Senate, takes stock of the present day situation and technical perspectives of development of renewable energy sources and of research needs of the French industry in this domain: 1 - renewable energies: key-technologies for the energy supply of developing countries and for a rational consumption in transportation systems and accommodations of developed countries (energies technically different from fossil or nuclear energies; fundamental energy sources for a developing world; different national goals in Europe depending on the available natural resources and on the political realities; a minor interest in France for the domestic power generation but a major interest for transports, residential and tertiary sectors and export); 2 - priority choices given to the French renewable energy resources: renewable electricity (photovoltaic, wind, biomass), thermal technologies (solar, geothermal, biomass); 3 - future policy: sustain of renewable electricity production with the revival of research, industry and technical cooperation. (J.S.)

Firm handling; the information exchange interaction by parents in paediatric care – An observational study

Directory of Open Access Journals (Sweden)

Carina Berterö

2011-01-01

Full Text Available Background: Information exchange is fundamental in the paediatric care encounter. Health care professionals need further background knowledge to encounter the parents/guardians from their perspective in their minors’ paediatric care. The parents’/guardians’ ability to manage the situation is dependent on their receiving optimal information, which is why it is important to study how information is exchanged.Aim: The aim of this study was to identify, describe and conceptualize how parents/guardians resolved their main concern ininformation exchange with health care professionals in paediatric care situations involving their minors.Methodology: Glaser’s grounded theory method was used and all data were analysed using constant comparative analysis. The observational study took place at three paediatric outpatient units at a university hospital and 24 parents/guardians participated. Data sources were field notes from 37 observations of paediatric care situations and five adherent excerpts from the minors’ medical records. Grounded theory is a method of conceptualising behaviour, which is why an observational study of parents’/guardians’ information exchange and social interaction in the context of nursing care is relevant as research design.Results: Firm handling was revealed as the way the parents/guardians resolved their main concerns when they were exchanging information about their minors’ paediatric care. Firm handling is built on five inter-related categories: representative advocating, collaborating, aim sharing, supportive resourcing and minor bypassing.Conclusions: This knowledge suggests possible ways for health care professionals to design paediatric care that supports, facilitates, strengthens and improves the parents’/guardians’ firm handling. The key issue is to find ways to support parents/guardians and minors so they can participate in health care encounters according to their preferences. Firm handling gives an

Challenges and innovative technologies on fuel handling systems for future sodium-cooled fast reactors

International Nuclear Information System (INIS)

Chassignet, Mathieu; Dumas, Sebastien; Penigot, Christophe; Prele, Gerard; Capitaine, Alain; Rodriguez, Gilles; Sanseigne, Emmanuel; Beauchamp, Francois

2011-01-01

The reactor refuelling system provides the means of transporting, storing, and handling reactor core subassemblies. The system consists of the facilities and equipment needed to accomplish the scheduled refuelling operations. The choice of a FHS impacts directly on the general design of the reactor vessel (primary vessel, storage, and final cooling before going to reprocessing), its construction cost, and its availability factor. Fuel handling design must take into account various items and in particular operating strategies such as core design and management and core configuration. Moreover, the FHS will have to cope with safety assessments: a permanent cooling strategy to prevent fuel clad rupture, plus provisions to handle short-cooled fuel and criteria to ensure safety during handling. In addition, the handling and elimination of residual sodium must be investigated; it implies specific cleaning treatment to prevent chemical risks such as corrosion or excess hydrogen production. The objective of this study is to identify the challenges of a SFR fuel handling system. It will then present the range of technical options incorporating innovative technologies under development to answer the GENERATION IV SFR requirements. (author)

Handling plan for the sustainable use of the hydric resource of the Guantiva and Onzaga, Paramos, Department of Boyaca

International Nuclear Information System (INIS)

Zuniga Palma, Henry

1998-01-01

The paper refers to the study carried out in the Department of Boyaca denominated handling Plan for the sustainable use of the hydric resource of the Guantiva and Onzaga paramos the study was made by means of agreement among the Regional Autonomous Corporation of Boyaca -CORPOBOYACA and the Universidad Distrital, Francisco Jose of Caldas, two alternatives are mentioned for its technical handling

Situated cognitive engineering: Developing adaptive track handling support for naval command and control centers

NARCIS (Netherlands)

Neerincx, M.A.; Brake, G.M. te; Ven, J.G.M. van de; Arciszewski, H.F.R.; Greef, T.E. de; Lindenberg, J.

2008-01-01

Dit artikel presenteert een 'situated cognitive engineering' (SCE) methode voor het verkrijgen van een theoretisch en empirisch onderbouwde Requirements Baseline, waarin operationele, human factors, en technische eisen in samenhang naar voren komen. De methode wordt toegelicht met een ontwerp van

"Oh my God, I can't handle this!' : trainees' emotional responses to complex situations

NARCIS (Netherlands)

Helmich, Esther; Diachun, Laura; Joseph, Radha; LaDonna, Kori; Noeverman-Poel, Nelleke; Lingard, Lorelei; Cristancho, Sayra

ContextDealing with emotions is critical for medical trainees' professional development. Taking a sociocultural and narrative approach to understanding emotions, we studied complex clinical situations as a specific context in which emotions are evoked and influenced by the social environment. We

Nuclear liability claims handling and costs - Germany and some comparative solutions

International Nuclear Information System (INIS)

Harbruecker, D.

2000-01-01

Comparison of legal status in Central Europe: coverage by insurance and State intervention, coverage of legal expenses and interests on awards technical problems of claims handing after a nuclear incident: guidelines to be prepared by insurer before and not after an incident occurred, demands on provider of financial security claims handling for part guaranteed by State to be transferred to insurer, necessary regulations of such arrangements (author)

How problems of storing waste nuclear fuel are handled in some countries

International Nuclear Information System (INIS)

Langhe, R.

1983-01-01

This report is a survey of the situation in a number of European countries, in the United States and the Soviet Union as well. In all democratic countries, the nuclear power issue is controversial. Everywhere it has met with opposition and criticism, even in countries where nuclear power is officially promoted. Which of the elements comprised in the nuclear power issue is regarded as most controversial varies from country to country. In some countries, final storage and handling of waste nuclear fuel are referred to this category, in others nuclear power plant safety is claimed to be of greater importance. In the last few months, some public opinion has been coupling the peaceful use of nuclear power with nuclear weapons, thereby deeming the greatest danger to be the risk of unwanted distribution of nuclear weapons. Technical difficulties as well as public opinion have indefinitely adjourned the final solution of the disposal of waste nuclear fuel. This problem is of such magnitude that a final solution is urgently needed. Apart from opinions, the existence of waste nuclear power fuel emitting dangerous radiation for over 40 generations to come, makes it a moral obligation to find a way to spare future generations that heritage. (author)

Recent fuel handling experience in Canada

International Nuclear Information System (INIS)

Welch, A.C.

1991-01-01

For many years, good operation of the fuel handling system at Ontario Hydro's nuclear stations has been taken for granted with the unavailability of the station arising from fuel handling system-related problems usually contributing less than one percent of the total unavailability of the stations. While the situation at the newer Hydro stations continues generally to be good (with the specific exception of some units at Pickering B) some specific and some general problems have caused significant loss of availability at the older plants (Pickering A and Bruce A). Generally the experience at the 600 MWe units in Canada has also continued to be good with Point Lepreau leading the world in availability. As a result of working to correct identified deficiencies, there were some changes for the better as some items of equipment that were a chronic source of trouble were replaced with improved components. In addition, the fuel handling system has been used three times as a delivery system for large-scale non destructive examination of the pressure tubes, twice at Bruce and once at Pickering and performing these inspections this way has saved many days of reactor downtime. Under COG there are several programs to develop improved versions of some of the main assemblies of the fuelling machine head. This paper will generally cover the events relating to Pickering in more detail but will describe the problems with the Bruce Fuelling Machine Bridges since the 600 MW 1P stations have a bridge drive arrangement that is somewhat similar to Bruce

Method of Computer-aided Instruction in Situation Control Systems

Directory of Open Access Journals (Sweden)

Anatoliy O. Kargin

2013-01-01

Full Text Available The article considers the problem of computer-aided instruction in context-chain motivated situation control system of the complex technical system behavior. The conceptual and formal models of situation control with practical instruction are considered. Acquisition of new behavior knowledge is presented as structural changes in system memory in the form of situational agent set. Model and method of computer-aided instruction represent formalization, based on the nondistinct theories by physiologists and cognitive psychologists.The formal instruction model describes situation and reaction formation and dependence on different parameters, effecting education, such as the reinforcement value, time between the stimulus, action and the reinforcement. The change of the contextual link between situational elements when using is formalized.The examples and results of computer instruction experiments of the robot device “LEGO MINDSTORMS NXT”, equipped with ultrasonic distance, touch, light sensors.

Safe handling of cytotoxic compounds in a biopharmaceutical environment.

Science.gov (United States)

Hensgen, Miriam I; Stump, Bernhard

2013-01-01

Handling cytotoxic drugs such as antibody-drug conjugates (ADCs) in a biopharmaceutical environment represents a challenge based on the potency of the compounds. These derivatives are dangerous to humans if they accidentally get in contact with the skin, are inhaled, or are ingested, either as pure compounds in their solid state or as a solution dissolved in a co-solvent. Any contamination of people involved in the manufacturing process has to be avoided. On the other hand, biopharmaceuticals need to be protected simultaneously against any contamination from the manufacturing personnel. Therefore, a tailor-made work environment is mandatory in order to manufacture ADCs. This asks for appropriate technical equipment to keep potential hazardous substances contained. In addition, clearly defined working procedures based on risk assessments as well as proper training for all personnel involved in the manufacturing process are needed to safely handle these highly potent pharmaceuticals.

Handling process disturbances in petroleum production

Energy Technology Data Exchange (ETDEWEB)

Sten, T; Bodsberg, L; Ingstad, O; Ulleberg, T

1988-06-01

Factors of importance in successful handling of major disturbances and crisis situations in petroleum production are discussed. Case studies based on interviews, questionnaires and systematic observations have been undertaken to identify critical factors in human computer design, in operator competence and attitudes and in work organization. It is shown that certain features of the humancomputer interaction become critical when serious disturbances are encountered. Likewise focusing on requirements during disturbances in particular has highlighted some new aspects of operator competence and of the work organization. The results are considered to be useful input to safety management in petroleum process plants, in formation of design specifications and in identifying need for further research regarding safety in offshore production.

Techniques for remote maintenance of in-cell material-handling system in the HFEF/N main cell

International Nuclear Information System (INIS)

Tobias, D.A.; Frickey, C.A.

1975-01-01

Operations in the main cell of HFEF/N have required development of remote handling equipment and unique techniques for maintaining the in-cell material-handling system. Specially designed equipment is used to remove a disabled crane or electromechanical manipulator bridge from its support rails and place it on floor stands for repair or maintenance. Support areas for the main cell, such as the spray chamber and hot repair area, provide essential decontamination, repair, and staging areas for the in-cell material-handling-system equipment and tools. A combined engineering and technical effort in upgrading existing master-slave manipulators has definitely reduced the requirements for their maintenance. The cell is primarily for postirradiation examination of LMFBR materials and fuel elements

Confidential Declaration of Family Situation (CDFS)

CERN Document Server

Human Resources Department

2005-01-01

The Confidential Declaration of Family Situation (CDFS) becomes a new computerized EDH form from October 2005 In accordance with Article R IV 1.17 of the Staff Regulations, Staff Members and Fellows, married or separated, must notify any changes in their spouse's income or health insurance cover in writing to CERN, within 30 calendar days of the change. This is necessary for the Organization to determine if a supplementary contribution is payable to the CERN Health Insurance Scheme (CHIS) for the spouse's coverage and, if so, the amount. Until now a paper form called « Confidential Declaration of Family Situation » (CDFS) was used for that purpose.  From early October 2005 the CDFS will be computerized for the whole Organization. Henceforth, any changes in a spouse's income or health insurance cover must be notified using EDH (Electronic Document Handling). Additionally, annual updates of the declaration will be required and will be requested by automatic e-mail. Early October an email will be sent to...

Safety issues in the handling of radiation sources in category IV gamma radiation facilities

International Nuclear Information System (INIS)

Kohli, A.K.

2002-01-01

There is potential for incidents/accidents related to handling of radiation sources. This is increasing due to the fact that more number of plants that too with much larger levels of activity are now coming up. Such facilities produce very high levels of exposure rates during irradiation. A person accidentally present in the irradiation cell can receive a lethal dose within a very short time. Apart from safety requirements during operation and maintenance of these facilities, safety during loading and unloading of sources is important. Category IV type irradiators are the most common. Doubly encapsulated Co-60 slugs are employed to form the source pencils. These irradiators employ a water pool for safely storing the source pencils when irradiation of the products is not going on or when human access is needed into the irradiation cell for some maintenance or source loading/unloading operations. Safety during loading/unloading operations of source pencils is important. In design itself care needs to be taken such that all such operations are convenient and any incident will not lead to a situation where it becomes difficult to come out. Different situations, which can arise during handling of radiation sources and suggested designs to obviate such tight situations, are discussed. (Author)

The Relationship Between Types of Conflict, Conflict Handling Strategies and Group Effectiveness

Directory of Open Access Journals (Sweden)

Francisca Marques

2015-03-01

Full Text Available This study seeks to analyze a if the frequency with which group choose to use a certain strategy is associated with the type of conflict represented in a given situation and b if, for different types of conflict, different conflict handling patterns (the frequency of their use could be considered significant predictors of group effectiveness, measured through group performance and satisfaction. We developed a correlational empirical study with a sample composed of 73 work groups, taken from 14 organizations in the industrial and service sectors. The results showed that groups in task conflict situations choose integrative strategies more often than when in relational conflict situations. Moreover, avoiding strategies were more likely to be used in relational conflict situations than in task conflict situations. On the other hand, our results showed that the frequency with which a group uses an integrative strategy can be considered a significant (positive predictor of group satisfaction for both types of conflict situations (task and relationship. Our results are discussed and compared with our previous literature review, as well as the implications and limitations of the study, along with some thoughts on further investigation.

Ground Handling Business at Non-European Biggest World Airports as a Problem of Market Structures

Directory of Open Access Journals (Sweden)

Anna Tomová

2015-12-01

Full Text Available In the paper we analyse the market structures of ground handling at the biggest non-European passenger and cargo airports in accordance with the ACI list of the most important world airports in 2014. Using the IATA IGHC database as of spring 2015, our analysis revealed that out of Europe double digit numbers of providers are rare what contrasts with situation in Europe where ground handling markets were deregulated by the Council Directive 96/67/EC. The analysis also brought that the monopolistic structures of ground handling markets were more specific for the regions of Asia and the Middle East. Airports as ground handling providers were not found within the analysed sample in North America, Latin America, Africa and Australia and Oceania, while this arrangement was to a larger extent present at the analysed Asian airports. Asia and the Middle East biggest airports are identified by us as candidates for further deregulation of ground handling arguing by forecasted demand for air services in the regions, although expected deregulation may be curbed by national regulators.

Solution for remote handling in accelerator installations

International Nuclear Information System (INIS)

Burgerjon, J.J.; Ekberg, E.L.; Grisham, D.L.; Horne, R.A.; Meyer, R.E.; Flatau, C.R.; Wilson, K.B.

1977-01-01

A description is given of a remote-handling system designed for the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF), versatile enough to be used in a variety of situations found around particle accelerators. The system consists of a bilateral (force-reflecting) servomanipulator installed on an articulated hydraulic boom. The boom also carries the necessary tools and observation devices. The whole slave unit can be moved by crane or truck to the area of operation. A control cable connects the slave unit with the control station, located at a safe distance in a trailer. Various stages of development as well as some operating experience are discussed

Feasibility study about handling plant and logistics of rotted spruce for energy and pulpwood; Esiselvitys energia- ja teollisuuspuun kaesittelylaitteistosta ja logistiikasta

Energy Technology Data Exchange (ETDEWEB)

Laurila, P [Biowatti Oy, Espoo (Finland)

1997-12-01

The aim of this feasibility study is to clarify the handling demands, technical and logistical possibilities, profitabilities both outlays and benefits in combined energy- and pulpwood production from rotted spruce raw material. The results of the study will be taken into consideration, if a handling plant will be decided to build and demonstrate beside the Forssa biomass power plant. (orig.)

Remote handling of the blanket segments: testing of 1/3 scale mock-ups at the Robertino facility

International Nuclear Information System (INIS)

Maisonnier, D.; Amelotti, F.; Chiasera, A.; Gaggini, P.; Damiani, C.; Degli Esposti, L.; Gatti, G.; Castillo, E.; Caravati, D.; Farfalletti-Casali, F.; Gritzmann, P.; Ruiz, E.

1995-01-01

The remote replacement of blanket segments inside the vacuum vessel of a fusion reactor is probably the most complex task from the maintenance standpoint. Its success will rely on the definition of appropriate handling concepts and equipment, but also on a ''maintenance friendly'' reactor layout and blanket design. The key difficulty is the lack of rigidity of the segments which results in considerable deformations since they cannot be gripped above their centre of gravity. These deformations may be up to five times greater than the assembly clearance and one order of magnitude larger than the required positioning accuracy. Experimental activities have been undertaken to select appropriate handling devices and procedures, to assess the design of the components handled, and to review specific technical issues such as kinematics and dynamics performance, trajectory planning and control and sensors requirement for the handling devices. Work was performed in the Robertino facility where two handling concepts have been tested at a 1/3 scale. (orig.)

Safe Handling of Radioisotopes. Health Physics Addendum

Energy Technology Data Exchange (ETDEWEB)

Appleton, G J; Krishnamoorthy, P N

1960-07-15

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains technical information necessary for the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the technical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Safe Handling of Radioisotopes. Health Physics Addendum

International Nuclear Information System (INIS)

Appleton, G.J.; Krishnamoorthy, P.N.

1960-01-01

The International Atomic Energy Agency published in 1958 a Manual entitled ''Safe Handling of Radioisotopes'' (Safety Series No. 1 - STI/PUB/1), based on the work of an international panel convened by the Agency. As recommended by that panel and approved by the Agency's Board of Governors, this Addendum has now been prepared, primarily as a supplement to the Manual. It contains technical information necessary for the implementation of the controls given in the Manual. In addition, it is intended to serve as a brief introduction to the technical problems encountered in radiological protection work and to the methods of resolving them. As in the case of the Manual itself, the information given in this Addendum is particularly relevant to the problems encountered by the small user of radioisotopes. Although the basic principles set forth in it apply to all work with radiation sources, the Addendum is not intended to serve as a radiological protection manual for use in reactor installations or large-scale nuclear industry, where more specialized techniques and information are required.

Exploring the relationship between anaesthesiologists' non-technical and technical skills.

Science.gov (United States)

Gjeraa, K; Jepsen, R M H G; Rewers, M; Østergaard, D; Dieckmann, P

2016-01-01

A combination of non-technical skills (NTS) and technical skills (TS) is crucial for anaesthetic patient management. However, a deeper understanding of the relationship between these two skills remains to be explored. We investigated the characteristics of trainee anaesthesiologists' NTS and TS in a simulated unexpected difficult airway management scenario. A mixed-method approach was used to explore the relationship between NTS and TS in 25 videos of 2nd year trainee anaesthesiologists managing a simulated difficult airway scenario. The videos were assessed using the customised version of the Anaesthetists' Non-Technical Skills System, ANTSdk, and an adapted TS checklist for calculating the correlation between NTS and TS. Written descriptions of the observed NTS were analysed using directed content analysis. The correlation between the NTS and the TS ratings was 0.106 (two-tailed significance of 0.613). Inter-rater reliability was substantial. Themes characterising good NTS included a systematic approach, planning and communicating decisions as well as responding to the evolving situation. A list of desirable, concrete NTS for the specific airway management situation was generated. This study illustrates that anaesthesiologist trainees' NTS and TS were not correlated in this setting, but rather intertwined and how the interplay of NTS and TS can impact patient management. Themes describing the characteristics of NTS and a list of desirable, concrete NTS were developed to aid the understanding, training and use of NTS. © 2015 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Remote handling features of the Fusion Materials Irradiation Test (FMIT) facility

International Nuclear Information System (INIS)

Klos, D.B.; Wierman, R.W.; Kelly, V.P.; Yount, J.A.

1980-01-01

Initial design of the experimental system provided two modes of access to the test cells. The horizontal mode was the predominant one. However, as the design progressed unacceptable risks were identified that increased personnel exposure to radiation and decreased testing availability of the facility. Consequently, vertical-only access was adopted. Remote handling features of both design concepts are described including the technical basis for the transition from the first to the second concept

The Victim Handling Model of Human Trafficking Through Economic Independence

OpenAIRE

Nuraeny, Henny; Utami, Tanti Kirana

2016-01-01

Human Trafficking is a modern trading of human slavery. Human Trafficking is also one of the worst forms of violation of human dignity that results in trauma to the victims. To that end, there should be a comprehensive treatment for victims. The problems that can be studied is whether a model that can be applied in the treatment of victims of trafficking in Cianjur and disseminating technical how models Handling of Victims of Human Trafficking in Cianjur. This study used normative juridical a...

SRTC criticality technical review: Nuclear Criticality Safety Evaluation 93-18 Uranium Solidification Facility's Waste Handling Facility

International Nuclear Information System (INIS)

Rathbun, R.

1993-01-01

Separate review of NMP-NCS-930058, open-quotes Nuclear Criticality Safety Evaluation 93-18 Uranium Solidification Facility's Waste Handling Facility (U), August 17, 1993,close quotes was requested of SRTC Applied Physics Group. The NCSE is a criticality assessment to determine waste container uranium limits in the Uranium Solidification Facility's Waste Handling Facility. The NCSE under review concludes that the NDA room remains in a critically safe configuration for all normal and single credible abnormal conditions. The ability to make this conclusion is highly dependent on array limitation and inclusion of physical barriers between 2x2x1 arrays of boxes containing materials contaminated with uranium. After a thorough review of the NCSE and independent calculations, this reviewer agrees with that conclusion

Handling of multiassembly sealed baskets between reactor storage and a remote handling facility

International Nuclear Information System (INIS)

Massey, J.V.; Kessler, J.H.; McSherry, A.J.

1989-06-01

The storage of multiple fuel assemblies in sealed (welded) dry storage baskets is gaining increasing use to augment at-reactor fuel storage capacity. Since this increasing use will place a significant number of such baskets on reactor sites, some initial downstream planning for their future handling scenarios for retrieving multi-assembly sealed baskets (MSBs) from onsite storage and transferring and shipping the fuel (and/or the baskets) to a federally operated remote handling facility (RHF). Numerous options or at-reactor and away-from-reactor handling were investigated. Materials handling flowsheets were developed along with conceptual designs for the equipment and tools required to handle and open the MSBs. The handling options were evaluated and compared to a reference case, fuel handling sequence (i.e., fuel assemblies are taken from the fuel pool, shipped to a receiving and handling facility and placed into interim storage). The main parameters analyzed are throughout, radiation dose burden and cost. In addition to evaluating the handling of MSBs, this work also evaluated handling consolidated fuel canisters (CFCs). In summary, the handling of MSBs and CFCs in the store, ship and bury fuel cycle was found to be feasible and, under some conditions, to offer significant benefits in terms of throughput, cost and safety. 14 refs., 20 figs., 24 tabs

How physicians have learned to handle sickness-certification cases.

Science.gov (United States)

Löfgren, Anna; Silén, Charlotte; Alexanderson, Kristina

2011-05-01

Sickness absence is a common ''prescription'' in health care in many Western countries. Despite the significance of sick-listing for the life situation of patients, physicians have limited training in how to handle sickness-certification cases and the research about sickness-certification practices is scarce. Gain knowledge on physicians' learning regarding management of sickness certification of patients in formal, informal, and non-formal learning situations, respectively, and possible changes in this from 2004 to 2008. Data from two comprehensive questionnaires to physicians in Sweden about their sickness-certification practice in 2004 (n = 7665) and 2008 (n = 36,898); response rates: 71% and 61%, respectively. Answers from all the physicians ≤64 years old and who had sickness certification tasks (n = 4019 and n = 14,210) were analysed. ratings of importance of different types of learning situations for their sickness-certification competence. Few physicians stated that formal learning situations had contributed to a large or fairly large extent to their competence in sickness certification, e.g. undergraduate studies had done that for 17%, internship for 37%, and resident training for 46%, respectively. Contacts with colleagues had been helpful for 65%. One-third was helped by training arranged by social insurance offices. There was a significant increase between 2004 and 2008 in all items related to formal and non-formal learning situations, while there were no changes regarding informal learning situations. This study of all physicians in Sweden shows that physicians primarily attain competence in sickness certification in their daily clinical practice; through contacts with colleagues and patients.

Nuclear fuel handling apparatus

International Nuclear Information System (INIS)

Andrea, C.; Dupen, C.F.G.; Noyes, R.C.

1977-01-01

A fuel handling machine for a liquid metal cooled nuclear reactor in which a retractable handling tube and gripper are lowered into the reactor to withdraw a spent fuel assembly into the handling tube. The handling tube containing the fuel assembly immersed in liquid sodium is then withdrawn completely from the reactor into the outer barrel of the handling machine. The machine is then used to transport the spent fuel assembly directly to a remotely located decay tank. The fuel handling machine includes a decay heat removal system which continuously removes heat from the interior of the handling tube and which is capable of operating at its full cooling capacity at all times. The handling tube is supported in the machine from an articulated joint which enables it to readily align itself with the correct position in the core. An emergency sodium supply is carried directly by the machine to provide make up in the event of a loss of sodium from the handling tube during transport to the decay tank. 5 claims, 32 drawing figures

Secondary limits of exposure in facilities handling uranium

International Nuclear Information System (INIS)

Raghavayya, M.

1999-08-01

Annual limits of exposure and intake for radiation workers in nuclear installations have been recommended by the International Commission on Radiological Protection and the same have been adopted by the Indian Atomic Energy Regulatory Board for all the radionuclides of interest. The prescribed limits cannot be directly used for day to day radiation protection work. Hence secondary limits have to be derived for routine applications. The modeling steps may be simple in some situations and more complicated in some others. The limits recommended are for individual radionuclides. But in facilities handling natural or enriched uranium the radionuclides (isotopes of uranium and its decay products) generally occur together in specific ratios. Derivation of secondary limits has to take this into consideration. The present document is an attempt at deriving the secondary limits required for routine application in facilities handling uranium (Mine, mill, refineries and fuel fabrication etc.). Secondary limits of exposure have been derived in this document for air borne activity, activity in water, surface contamination and internal exposures. (author)

Organizational structure of technical and tactical training of skilled goalkeepers in football

Directory of Open Access Journals (Sweden)

Shamardin V.N.

2015-02-01

Full Text Available Purpose: to study the structure of technical and tactical training of skilled goalkeepers in football. Material : the study involved 40 goalkeepers in age from 21 to 39 years (team Premier League Championship of Ukraine. According to teacher’s observations were under direct competition activity of skilled goalkeepers. Results : It is shown that the technical and tactical activities goalkeeper characterized by two phases of the game: action to protect and attack. In turn, they include eight typical situations. It was found that in accordance with these typical situations goalkeeper applying a technical and tactical actions. Conclusions : It is recommended to increase the efficiency of the game keeper in protective and offensive actions to use specific and non-specific exercises in a variety of standard situations arising during the match.

Implementing RFID technology in a novel triage system during a simulated mass casualty situation.

Science.gov (United States)

Jokela, Jorma; Simons, Tomi; Kuronen, Pentti; Tammela, Juha; Jalasvirta, Pertti; Nurmi, Jouni; Harkke, Ville; Castrén, Maaret

2008-01-01

The purpose of this study is to determine the applicability of Radio Frequency Identification (RFID) technology and commercial cellular networks to provide an online triage system for handling mass casualty situations. This was tested by a using a pilot system for a simulated mass casualty situation during a military field exercise. The system proved to be usable. Compared to the currently used system, it also dramatically improves the general view of mass casualty situations and enhances medical emergency readiness in a military medical setting. The system can also be adapted without any difficulties by the civilian sector for the management of mass casualty disasters.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

NARCIS (Netherlands)

Krage, R.; Zwaan, L.; Tjon Soei Len, L.; Kolenbrander, M.; Groeningen, D. van; Loer, S.A.; Wagner, C.; Schober, P.

2017-01-01

Background: Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary

Injury situations in Freestyle Ski Cross (SX): a video analysis of 33 cases.

Science.gov (United States)

Randjelovic, Stefan; Heir, Stig; Nordsletten, Lars; Bere, Tone; Bahr, Roald

2014-01-01

Although injury risk in Freestyle Ski Cross (SX) is high, little is known about the situations leading up to time-loss injuries. To describe the situations leading up to time-loss injuries in elite Freestyle SX. Descriptive video analysis. Thirty-three video recordings of SX injuries reported through the International Ski Federation Injury Surveillance System for four World Cup seasons (2006/2007 through 2010) were obtained. Five experts in the fields of sport medicine and SX analysed each case to describe in detail the situation leading up to the injury (skiing situation and skier behaviour). Injuries occurred in four different skiing situations: jumping (n=16), turning (n=8), jumping and turning (n=7) and rollers (n=2). All injured skiers lost control before time of injury (n=33), due to skier-opponent contact (n=13), technical errors (n=8) or inappropriate strategy (n=8), which led to a fall (n=29). Contact occurred in 21 of 33 cases, usually unintentional at landing or take-off, caused by the opponent (n=11) or injured skier (n=8). The technical error cases (n=8) were dominated by bad jumping technique (n=6) and too much inside lean in turning situations (n=2), while inappropriate course line and bad timing at take off (n=7) dominated the inappropriate strategy cases (n=8). We identified four main injury situations in elite SX, dominated by jumping situations. The primary cause of injury was unintentional skier-opponent contact in jumping, bank turning and roller situations. Another common cause of injury was personal errors (inappropriate technique and strategy) at take-off and in turning situations.

XML: Solution for the integration of nuclear power plant data and technical documents

International Nuclear Information System (INIS)

Gordillo, F.

2000-01-01

Assuring proper operation of the systems that make up a nuclear power plant requires handling a massive amount of technical documents. This technical documentation, consisting mainly of system descriptions, operating and maintenance procedures, safety procedures, etc, presents particular characteristics, mainly: Great volume of information. High contents in figures and graphics. High reliability required. Multiple cross-references among documents. (Author)

The situated accomplishment (aesthetics) of being a cyranoid

DEFF Research Database (Denmark)

Raudaskoski, Pirkko Liisa; Mitchell, Robb

2013-01-01

One aim of participatory innovation is to find new ways of engaging people in various situations that result in ideas and suggestions. For a socio- technical system – whether the design process or its implemented result – to work smoothly (aesthetically) as a specific social order, we should...

Effectiveness of measures and implementation strategies in reducing physical work demands due to manual handling at work

NARCIS (Netherlands)

van der Molen, Henk F.; Sluiter, Judith K.; Hulshof, Carel T. J.; Vink, Peter; Frings-Dresen, Monique H. W.

2005-01-01

This review aimed at producing insight into the effectiveness of interventions to reduce the physical work demands associated with manual (materials) handling in the work situation and musculoskeletal symptoms in the longer term. A systematic electronic literature search between 1990 and February

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: Does stress have an influence?

NARCIS (Netherlands)

Krage, R. (Ralf); L. Zwaan (Laura); Tjon Soei Len, L. (Lian); Kolenbrander, M.W. (Mark W); Van Groeningen, D. (DIck); S.A. Loer (Stephan A.); C. Wagner (Cordula); P. Schober (P.)

2017-01-01

textabstractBackground Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary

Non-technical skills for scrub practitioners.

Science.gov (United States)

McClelland, Guy

2012-12-01

The non-technical skills of situational awareness and the formation of effective interpersonal relationships are essential to enhance surgical outcomes. However, most scrub practitioners demonstrate only tacit awareness of these skills and develop such qualities on an informal basis. Application of non-technical skills may be assessed formally, using a structured framework, to transform normative behaviour and to strengthen barriers against the latent threats that may result from fallible humans working in inadequate organisational systems.

Characterisation of working conditions for handling radionuclides

International Nuclear Information System (INIS)

Feer, Y. van der

1980-01-01

In this paper simple formulae are given for estimating the limiting amount for different working conditions. The formulae are based on a rude estimation of the radiation hazard for different modes of exposure. The hazards considered are external radiation hazard for workers and inhalation hazard for workers and members of the public. For radiation workers exposure is considered to be acceptable if the average effective dose-equivalent is limited to 5 m Sv (0.5 rem) per year. For members of the public it is assumed that the average effective dose-equivalent must be limited to 50 Sv (5 mrem) per year. Correction factors are provided for situations where more than one radionuclide is being handled. (U.K.)

Confidential Declaration of Family Situation (CDFS)

CERN Multimedia

Human Resources Department

2005-01-01

The Confidential Declaration of Family Situation (CDFS) becomes a new computerized EDH form from October 2005 In accordance with Article R IV 1.17 of the Staff Regulations, Staff Members and Fellows, married or separated, must notify any changes in their spouse's income or health insurance cover in writing to CERN, within 30 calendar days of the change. This is necessary for the Organization to determine if a supplementary contribution is payable to the CERN Health Insurance Scheme (CHIS) for the spouse's coverage and, if so, the amount. Until now a paper form called « Confidential Declaration of Family Situation » (CDFS) was used for that purpose.  From early October 2005 the CDFS will be computerized for the whole Organization. Henceforth, any changes in a spouse's income or health insurance cover must be notified using EDH (Electronic Document Handling). Additionally, annual updates of the declaration will be required and will be requested by automatic e-mail. Early October an email will be...

Some considerations in the handling of fluorine and the chlorine fluorides

International Nuclear Information System (INIS)

Farrar, R.L. Jr.; Barber, E.J.

1979-01-01

This paper reviews many considerations in the safe handling of fluorine and the chlorine fluorides. The physical, chemical, and toxicological properties of the materials are reviewed. Proper choice of materials of construction and materials in contact with the active gases are considered. The survey includes safe practices in design and operation of experiments and processes. Soda lime traps and caustic scrubbing are reviewed for fluorine disposal methods. Finally some explosive reactions and explosive situations are discussed

Ethics rounds do not improve the handling of ethical issues by psychiatric staff.

Science.gov (United States)

Silén, Marit; Haglund, Kristina; Hansson, Mats G; Ramklint, Mia

2015-08-01

One way to support healthcare staff in handling ethically difficult situations is through ethics rounds that consist of discussions based on clinical cases and are moderated by an ethicist. Previous research indicates that the handling of ethically difficult situations in the workplace might have changed after ethics rounds. This, in turn, would mean that the "ethical climate", i.e. perceptions of how ethical issues are handled, would have changed. To investigate whether ethics rounds could improve the ethical climate perceived by staff working in psychiatry outpatient clinics. In this quasi-experimental study, six inter-professional ethics rounds led by a philosopher/ethicist were conducted at two psychiatry outpatient clinics. Changes in ethical climate were measured at these clinics as well as at two control clinics at baseline and after the intervention period using the instrument Hospital Ethical Climate Survey. Within-groups comparisons of median sum scores of ethical climate showed that no statistically significant differences were found in the intervention group before or after the intervention period. The median sum scores for ethical climate were significantly higher, both at baseline and after the intervention period (P ≤ 0.001; P = 0.046), in the intervention group. Ethics rounds in psychiatric outpatient clinics did not result in significant changes in ethical climate. Outcomes of ethics rounds might, to a higher degree, be directed towards patient-related outcomes rather than towards the staff's working environment, as the questions brought up for discussion during the ethics rounds concerned patient-related issues.

Handling of high intensity proton beams at 12 GeV

International Nuclear Information System (INIS)

Takasaki, M.; Minakawa, M.; Yamanoi, Y.; Ieiri, M.; Kato, Y.; Ishii, H.; Suzuki, Y.; Suzuki, T.; Tanaka, K.H.

1990-01-01

A new counter experimental hall is now being constructed at the KEK (National Laboratory for High Energy Physics, Japan) 12 GeV Proton Synchrotron (KEK-PS). This hall will be completed by the end of 1989, immediately followed by magnet installation. The present report describes the new technical achievements employed at the hall. The most important and essential feature of the equipment is that the beam-handling system is maintenance-free, though in case of need, maintenance should be carried out quickly from a distant location in order to reduce the absorbed dose during the maintenance work. This paper is divided into three parts. The first part outlines the general design concept of the hall, focusing on the handling of high-intensity beams. The second part addresses the development of a quick-disconnect system, focusing on electric power, interlock signals, cooling water, pumping port, and vacuum flange. The third part describes the development of radiation-resistant instruments, focusing on polyimide magnets and cement magnets. (N.K.)

Handling and disposal of radioactive scrap

International Nuclear Information System (INIS)

Witte, K.

1975-01-01

The 9th special course for journalists was in this year on the highly topical subject 'handling and disposal of radioactive scrap'. It was held on the 26th and 27th May 1975 at the Nuclear Research Centre at Karlsruhe. These courses have been held for several years by the Nuclear Research Association (GfK) in the School for Nuclear Engineering and are intended mainly to contribute to journalists of the daily papers, radio and television who are 'not previously technically trained' an introduction into the difficult subject matter of nuclear engineering with its ancillary areas. In view of the many discussions carried on in public the course is further intended to achieve that the problems discussed are treated by means of publicity which is free from emotion. In the journalists' course this year specially selected experts gave technical information prepared for general information as to how radioactive waste can be safely worked up and then finally stored without adverse effects on the environment. Since the interesting collection of questions was put forward in a compressed form and at the same time clearly presented, the author reports on the different separate subjects on which lectures were given. (orig.) [de

Reader-Centered Technical Writing

Science.gov (United States)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

Development of emergency response training focusing on non-technical skills. (2) Extraction of non-technical skills

International Nuclear Information System (INIS)

Matsui, Yuko; Hikono, Masaru; Iwasaki, Mari; Morita, Mizuho

2017-01-01

This study aimed at characterizing a non-technical skill exercise for on-site managers in charge of initial response at an emergency response center by extracting and clarifying the behavior examples of non-technical skills shown in the exercise scenario. From video observations, the non-technical skill examples were identified from seven of the eight nontechnical skill categories which had been defined when the training program was developed. Especially, they included many skills of 'Communication', 'Situation Understanding' and 'Organizational management'. At the same time, the limitation when extracting the cases by observations was identified. The extracted non-technical skill cases are expected to be used for characterizing exercise scenarios, as well as provide knowledge to raise the awareness of exercise participants. (author)

[The layperson in emergency situation].

Science.gov (United States)

Pergola, Aline Maino; Araujo, Izilda Esmenia Muglia

2008-12-01

The layperson's qualification to provide early care in emergency situations and basic life support (BLS) is fundamental to save lives and prevent sequels. The objective was to identify the level of knowledge of lay people about approaching an emergency victim. Structured interviews in non-technical language were used with a 385-subject sample, average age 35.4 (+/- 14.55) years, with more than 50% having a high school or university education. Over 55% of these observed situations with loss of consciousness, but only 31% called for specialized help. 34% underwent a first-aid course, but only 13% feel prepared. The most often cited place of learning was the driving school (DS), 35.9%. Other training places were higher when compared to the DS (p = 0.048). Almost 17% do not know how to recognize the presence of vital signs. Almost 31% do not know the telephone number of the emergency service. Laypersons have incomplete or incorrect knowledge about care for unconscious victims.

Systematic analysis of video data from different human–robot interaction studies: a categorization of social signals during error situations

Science.gov (United States)

Giuliani, Manuel; Mirnig, Nicole; Stollnberger, Gerald; Stadler, Susanne; Buchner, Roland; Tscheligi, Manfred

2015-01-01

Human–robot interactions are often affected by error situations that are caused by either the robot or the human. Therefore, robots would profit from the ability to recognize when error situations occur. We investigated the verbal and non-verbal social signals that humans show when error situations occur in human–robot interaction experiments. For that, we analyzed 201 videos of five human–robot interaction user studies with varying tasks from four independent projects. The analysis shows that there are two types of error situations: social norm violations and technical failures. Social norm violations are situations in which the robot does not adhere to the underlying social script of the interaction. Technical failures are caused by technical shortcomings of the robot. The results of the video analysis show that the study participants use many head movements and very few gestures, but they often smile, when in an error situation with the robot. Another result is that the participants sometimes stop moving at the beginning of error situations. We also found that the participants talked more in the case of social norm violations and less during technical failures. Finally, the participants use fewer non-verbal social signals (for example smiling, nodding, and head shaking), when they are interacting with the robot alone and no experimenter or other human is present. The results suggest that participants do not see the robot as a social interaction partner with comparable communication skills. Our findings have implications for builders and evaluators of human–robot interaction systems. The builders need to consider including modules for recognition and classification of head movements to the robot input channels. The evaluators need to make sure that the presence of an experimenter does not skew the results of their user studies. PMID:26217266

Systematic analysis of video data from different human-robot interaction studies: a categorization of social signals during error situations.

Science.gov (United States)

Giuliani, Manuel; Mirnig, Nicole; Stollnberger, Gerald; Stadler, Susanne; Buchner, Roland; Tscheligi, Manfred

2015-01-01

Human-robot interactions are often affected by error situations that are caused by either the robot or the human. Therefore, robots would profit from the ability to recognize when error situations occur. We investigated the verbal and non-verbal social signals that humans show when error situations occur in human-robot interaction experiments. For that, we analyzed 201 videos of five human-robot interaction user studies with varying tasks from four independent projects. The analysis shows that there are two types of error situations: social norm violations and technical failures. Social norm violations are situations in which the robot does not adhere to the underlying social script of the interaction. Technical failures are caused by technical shortcomings of the robot. The results of the video analysis show that the study participants use many head movements and very few gestures, but they often smile, when in an error situation with the robot. Another result is that the participants sometimes stop moving at the beginning of error situations. We also found that the participants talked more in the case of social norm violations and less during technical failures. Finally, the participants use fewer non-verbal social signals (for example smiling, nodding, and head shaking), when they are interacting with the robot alone and no experimenter or other human is present. The results suggest that participants do not see the robot as a social interaction partner with comparable communication skills. Our findings have implications for builders and evaluators of human-robot interaction systems. The builders need to consider including modules for recognition and classification of head movements to the robot input channels. The evaluators need to make sure that the presence of an experimenter does not skew the results of their user studies.

Current Situations and Countermeasures of Organic Tobacco Development

Institute of Scientific and Technical Information of China (English)

2011-01-01

Current situations of organic tobacco development at both home and abroad,indicating that organic tobacco is one of the innovation directions for sustainable,healthy,environmental protection and low carbon development of modern tobacco industry.On the basis of foreign cultivation technical system for organic agriculture,the cultivation technical system for organic tobacco is summed up as follows:first,keep the diversity and continuity of space and time;second,ensure closeness of nutrient cycle;third,improve self-regulatory system and protection ability of crops.Then,the development trend of organic tobacco is analyzed and corresponding measures are put forward:establish production base and assessment system for organic tobacco;establish technical system for production of organic tobacco;establish and perfect evaluation system for management,production and supervision of organic tobacco;strengthen popularization of production and concept of organic tobacco;improve management of organic tobacco purchase,industry commerce handover,and redrying.

Handling, conditioning and storage of spent sealed radioactive sources. Technical manual for the management of low and intermediate level wastes generated at small nuclear research centres and by radioisotope users in medicine, research and industry

International Nuclear Information System (INIS)

2000-05-01

This report is intended to provide reference material, guidance and know-how on handling, conditioning and storage of spent sealed radioactive sources (SRS) to both users of SRS and operators of waste management facilities. The scope of this report covers all types of SRS except those exempted from regulatory control. The report contains in some detail technical procedures for the conditioning of spent SRS, describes the means required to assure the quality of the resulting package and discusses the measures to prepare waste packages with a certain flexibility to accommodate possible future disposal requirements

Recommendations for cask features for robotic handling from the Advanced Handling Technology Project

International Nuclear Information System (INIS)

Drotning, W.

1991-02-01

This report describes the current status and recent progress in the Advanced Handling Technology Project (AHTP) initiated to explore the use of advanced robotic systems and handling technologies to perform automated cask handling operations at radioactive waste handling facilities, and to provide guidance to cask designers on the impact of robotic handling on cask design. Current AHTP tasks have developed system mock-ups to investigate robotic manipulation of impact limiters and cask tiedowns. In addition, cask uprighting and transport, using computer control of a bridge crane and robot, were performed to demonstrate the high speed cask transport operation possible under computer control. All of the current AHTP tasks involving manipulation of impact limiters and tiedowns require robotic operations using a torque wrench. To perform these operations, a pneumatic torque wrench and control system were integrated into the tool suite and control architecture of the gantry robot. The use of captured fasteners is briefly discussed as an area where alternative cask design preferences have resulted from the influence of guidance for robotic handling vs traditional operations experience. Specific robotic handling experiences with these system mock-ups highlight a number of continually recurring design principles: (1) robotic handling feasibility is improved by mechanical designs which emphasize operation with limited dexterity in constrained workspaces; (2) clearances, tolerances, and chamfers must allow for operations under actual conditions with consideration for misalignment and imprecise fixturing; (3) successful robotic handling is enhanced by including design detail in representations for model-based control; (4) robotic handling and overall quality assurance are improved by designs which eliminate the use of loose, disassembled parts. 8 refs., 15 figs

General principles of the nuclear criticality safety for handling, processing and transportation fissile materials in the USSR

International Nuclear Information System (INIS)

Vnukov, V.S.; Rjazanov, B.G.; Sviridov, V.I.; Frolov, V.V.; Zubkov, Y.N.

1991-01-01

The paper describes the general principles of nuclear criticality safety for handling, processing, transportation and fissile materials storing. Measures to limit the consequences of critical accidents are discussed for the fuel processing plants and fissile materials storage. The system of scientific and technical measures on nuclear criticality safety as well as the system of control and state supervision based on the rules, limits and requirements are described. The criticality safety aspects for various stages of handling nuclear materials are considered. The paper gives descriptions of the methods and approaches for critical risk assessments for the processing facilities, plants and storages. (Author)

Conflict-handling mode scores of three crews before and after a 264-day spaceflight simulation.

Science.gov (United States)

Kass, Rachel; Kass, James; Binder, Heidi; Kraft, Norbert

2010-05-01

In both the Russian and U.S. space programs, crew safety and mission success have at times been jeopardized by critical incidents related to psychological, behavioral, and interpersonal aspects of crew performance. The modes used for handling interpersonal conflict may play a key role in such situations. This study analyzed conflict-handling modes of three crews of four people each before and after a 264-d spaceflight simulation that was conducted in Russia in 1999-2000. Conflict was defined as a situation in which the concerns of two or more individuals appeared to be incompatible. Participants were assessed using the Thomas-Kilmann Conflict Mode Instrument, which uses 30 forced-choice items to produce scores for five modes of conflict handling. Results were compared to norms developed using managers at middle and upper levels of business and government. Both before and after isolation, average scores for all crews were above 75% for Accommodating, below 25% for Collaborating, and within the middle 50% for Competing, Avoiding, and Compromising. Statistical analyses showed no significant difference between the crews and no statistically significant shift from pre- to post-isolation. A crew predisposition to use Accommodating most and Collaborating least may be practical in experimental settings, but is less likely to be useful in resolving conflicts within or between crews on actual flights. Given that interpersonal conflicts exist in any environment, crews in future space missions might benefit from training in conflict management skills.

Experience based on practice to improve the radon-situation in Saxony. A personal retrospect and outlook for young radiation protection engineers; Erfahrungen aus praktischer Taetigkeit zur Verbesserung der Radon-Situation in Sachsen. Ein persoenlicher Rueckblick und Perspektiven fuer junge Strahlenschuetzer

Energy Technology Data Exchange (ETDEWEB)

Loebner, Walfried

2015-07-01

Based on the state of knowledge and international developments concerning the radon situation in dwellings the experiences regarding the improvement of the radon situation in Saxony were described as a personal retrospect of more than 20 years practice. The taken path to control the radon situation in German dwellings has been reflected as a personally point of view. Open questions and controversial issues were named. The practical experiences in handling of radon in dwellings in connection with the remediation activities at uranium mining legacies were described. As conclusions drawn on own activities and insights the future challenges to improve the radon situation in Saxony were outlined. An outlook was directed to the young radiation protection engineers and civil engineers.

Safety of handling, storing and transportation of spent nuclear fuel and vitrified high-level wastes

International Nuclear Information System (INIS)

Ericsson, A.M.

1977-11-01

The safety of handling and transportation of spent fuel and vitrified high-level waste has been studied. Only the operations which are performed in Sweden are included. That is: - Transportation of spent fuel from the reactors to an independant spent fuel storage installation (ISFSI). - Temporary storage of spent fuel in the ISFSI. - Transportation of the spent fuel from the ISFSI to a foreign reprocessing plant. - Transportation of vitrified high-level waste to an interim storage facility. - Interim storage of vitrified high-level waste. - Handling of the vitrified high-level waste in a repository for ultimate disposal. For each stage in the handling sequence above the following items are given: - A brief technical description. - A description of precautionary measures considered in the design. - An analysis of the discharges of radioactive materials to the environment in normal operation. - An analysis of the discharges of radioactive materials due to postulated accidents. The dose to the public has been roughly and conservatively estimated for both normal and accident conditions. The expected rate of occurence are given for the accidents. The results show that above described handling sequence gives only a minor risk contribution to the public

How to develop and write a case for technical writing

Science.gov (United States)

Couture, B.; Goldstein, J.

1981-01-01

Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

Creating Affording Situations: Coaching through Animate Objects.

Science.gov (United States)

Baber, Chris; Khattab, Ahmad; Russell, Martin; Hermsdörfer, Joachim; Wing, Alan

2017-10-11

We explore the ways in which animate objects can be used to cue actions as part of coaching in Activities of Daily Living (ADL). In this case, changing the appearance or behavior of a physical object is intended to cue actions which are appropriate for a given context. The context is defined by the intention of the users, the state of the objects and the tasks for which these objects can be used. We present initial design prototypes and simple user trials which explore the impact of different cues on activity. It is shown that raising the handle of a jug, for example, not only cues the act of picking up the jug but also encourages use of the hand adjacent to the handle; that combinations of lights (on the objects) and auditory cues influence activity through reducing uncertainty; and that cueing can challenge pre-learned action sequences. We interpret these results in terms of the idea that the animate objects can be used to create affording situations, and discuss implications of this work to support relearning of ADL following brain damage or injury, such as might arise following a stroke.

Creating Affording Situations: Coaching through Animate Objects

Directory of Open Access Journals (Sweden)

Chris Baber

2017-10-01

Full Text Available We explore the ways in which animate objects can be used to cue actions as part of coaching in Activities of Daily Living (ADL. In this case, changing the appearance or behavior of a physical object is intended to cue actions which are appropriate for a given context. The context is defined by the intention of the users, the state of the objects and the tasks for which these objects can be used. We present initial design prototypes and simple user trials which explore the impact of different cues on activity. It is shown that raising the handle of a jug, for example, not only cues the act of picking up the jug but also encourages use of the hand adjacent to the handle; that combinations of lights (on the objects and auditory cues influence activity through reducing uncertainty; and that cueing can challenge pre-learned action sequences. We interpret these results in terms of the idea that the animate objects can be used to create affording situations, and discuss implications of this work to support relearning of ADL following brain damage or injury, such as might arise following a stroke.

Low-level waste management program: technical program overview

International Nuclear Information System (INIS)

Lowrie, R.S.

1981-01-01

The mission of the technical program is to develop the technology component of the Department of Energy's Low-Level Waste Management Program and to manage research and development, demonstration, and documentation of the technical aspects of the program. Some of the major technology objectives are: develop and demonstrate techniques for waste generation reduction; develop and demonstrate waste treatment, handling and packaging techniques; develop and demonstrate the technology for greater confinement; and develop the technology for remedial action at existing sites. In addition there is the technology transfer objective which is to compile and issue a handbook documenting the technology for each of the above technology objectives

Non-technical skills assessment in surgery.

Science.gov (United States)

Sharma, Bharat; Mishra, Amit; Aggarwal, Rajesh; Grantcharov, Teodor P

2011-09-01

Adverse events in surgery have highlighted the importance of non-technical skills, such as communication, decision-making, teamwork, situational awareness and leadership, to effective organizational performance. These skills carry particular importance to surgical oncology, as members of a multidisciplinary team must work cohesively to formulate effective patient care plans. Several non-technical skills evaluation tools have been developed for use in surgery, without adequate comparison and consensus on which should be standard for training. Eleven articles describing the use of three non-technical evaluation tools related to surgery: NOTSS (Non Technical Skills for Surgeons), NOTECHS (Non Technical Skills) and OTAS (Observational Teamwork Assessment for Surgery) were analyzed with respect to scale formulation, validity, reliability and feasibility. Furthermore, their use in training thus far and the future of non-technical rating scales in surgical curricula was discussed. Future work should focus on incorporating these assessment tools into training and into a real operating room setting to provide formative evaluations for surgical residents. Copyright © 2010 Elsevier Ltd. All rights reserved.

A new virtual-reality training module for laparoscopic surgical skills and equipment handling: can multitasking be trained? A randomized controlled trial

NARCIS (Netherlands)

Bongers, P.J.; van Hove, P.D.; Stassen, L.P.S.; Schreuder, HWR; Dankelman, J.

Objective During laparoscopic surgery distractions often occur and multitasking between surgery and other tasks, such as technical equipment handling, is a necessary competence. In psychological research, reduction of adverse effects of distraction is demonstrated when specifically multitasking is

Successful Innovation in Tele-Care: Continuous Cocreation and Situated Re-Innovation

DEFF Research Database (Denmark)

Nicolajsen, Hanne Westh; Tjørnhøj, Gitte

2016-01-01

the technical and the social inextricable linked. This paper challenges the belief in an inherent divide by suggesting integration of the technological and organizational development in the pilot-phase as well as subsequent phases through co-creation and situated re-innovation. With reference to a case...

Paramedics' non-technical skills: a literature review.

Science.gov (United States)

Shields, Allan; Flin, Rhona

2013-05-01

Healthcare organisations have started to examine the impact that the human worker has on patient safety. Adopting the Crew Resource Management (CRM) approach, used in aviation, the CRM or non-technical skills of anaesthetists, surgeons, scrub practitioners and emergency physicians have recently been identified to assist in their training and assessment. Paramedics are exposed to dynamic and dangerous situations where patients have to be managed, often with life-threatening injuries or illness. As in other safety-critical domains, the technical skills of paramedics are complemented by effective non-technical skills. The aim of this paper was to review the literature on the non-technical (social and cognitive) skills used by paramedics. This review was undertaken as part of a task analysis to identify the non-technical skills used by paramedics. Of the seven papers reviewed, the results have shown very little research on this topic and so reveal a gap in the understanding of paramedic non-technical skills.

Transfer Area Mechanical Handling Calculation

International Nuclear Information System (INIS)

Dianda, B.

2004-01-01

This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAX Company L.L. C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC--28-01R W12101'' (Arthur, W.J., I11 2004). This correspondence was appended by further Correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC--28-OIRW12101; TDL No. 04-024'' (BSC 2004a). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The purpose of this calculation is to establish preliminary bounding equipment envelopes and weights for the Fuel Handling Facility (FHF) transfer areas equipment. This calculation provides preliminary information only to support development of facility layouts and preliminary load calculations. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process. It is intended that this calculation is superseded as the design advances to reflect information necessary to support License Application. The design choices outlined within this calculation represent a demonstration of feasibility and may or may not be included in the completed design. This calculation provides preliminary weight, dimensional envelope, and equipment position in building for the purposes of defining interface variables. This calculation identifies and sizes major equipment and assemblies that dictate overall equipment dimensions and facility interfaces. Sizing of components is based on the selection of commercially available products, where applicable. This is not a specific recommendation for the future use of these components or their

Full scale tests on remote handled FFTF fuel assembly waste handling and packaging

International Nuclear Information System (INIS)

Allen, C.R.; Cash, R.J.; Dawson, S.A.; Strode, J.N.

1986-01-01

Handling and packaging of remote handled, high activity solid waste fuel assembly hardware components from spent FFTF reactor fuel assemblies have been evaluated using full scale components. The demonstration was performed using FFTF fuel assembly components and simulated components which were handled remotely using electromechanical manipulators, shielding walls, master slave manipulators, specially designed grapples, and remote TV viewing. The testing and evaluation included handling, packaging for current and conceptual shipping containers, and the effects of volume reduction on packing efficiency and shielding requirements. Effects of waste segregation into transuranic (TRU) and non-transuranic fractions also are discussed

Approaches to technical and scientific support for the nuclear regulatory body in Belarus

International Nuclear Information System (INIS)

Lobacha, Dmitry J.; Teskeb, Hartmuth

2010-01-01

Approaches to technical and scientific support for the State NPP Program in Belarus are described and compared with the recommendations of the IAEA. The past infrastructure in Belarus did not have specialized technical support organization (TSO) for the nuclear regulatory body. Currently, there are two technical and scientific support centers, nominated by decrees. They are part of the NPP infrastructure and belong to the National Academy of Sciences and the Ministry of Energy. It is a challenge to establish the needed TSO capacities for the nuclear regulatory body (the Ministry for Emergency Situations) inside existing institutions of the Ministry for Emergency Situations (MES). Initially, the new technical support structure could focus on well known topics like emergency preparedness and radiation protection. The scope of work has to be extended to all major aspects of radiation and nuclear safety of the new NPP soon. National education as well as international knowledge transfer are important for that. Tasks and challenges of new technical safety institution(s) are described. (author)

Environmental monitoring in emergency situations

International Nuclear Information System (INIS)

1966-01-01

This manual gives technical guidance on emergency monitoring procedures to those who would have to assess the situation after an accident leading to the uncontrolled release of radioactive substances to the environment. Its aim is to draw attention to the important factors that should be considered in formulating emergency plans. The seven annexes contain inventories of fission products and possible releases; dispersion, deposition and dose-exposure relationships for airborne releases; α-, β- and γ-radiation surveys; information on sample collection and field evaluation; and brief descriptions of the environmental monitoring procedures adopted in previous emergencies (Windscale 1957, AERE Harwell 1961 and NRTS Idaho 1961).

TINGKAT KEBISINGAN DAN TAJAM DENGAR PETUGAS GROUND HANDLING DI BANDARA NGURAH RAI BALI

Directory of Open Access Journals (Sweden)

I W Putra Yadnya

2012-11-01

Full Text Available Ngurah Rai Airport is an International Airport in Bali, this will increase the air traffic frequency and increase the number of aircraft types. This condition increases the noise risk factor which contributes to probable cause of health problem for airport workers. The objective of this study is to analyze the noise effect against hearing acurity of the ground handling staff in Ngurah Rai Airport.This cross sectional study design with 44 number of sample. The sample was taking by proportional random sampling method.The study results showed that noise level in the Administration Division was between 49.6 – 52 dBA. However, in the Technical Division at 08.00 – 16.00 was averagely between 88,3 – 90.9 dBA, at 16.00 – 24.00 was between 89.3 – 93.5 dBA and at 24.00 – 08.00 was between 69.9 – 73.2 dBA. Hearing acurity of ground handling staff in the administration division was 1 personnel (16.7 % experienced hearing acurity depreciation. However, in the technical division, 23 personnel (60.5% experienced hearing acurity depreciation. The staff with ? 20 years working period numbering 6 personnel (37,5% experienced hearing acurity depreciation and staff with > 20 years working period numbering 17 personnel (77.3% experienced hearing acurity depreciation. On the other hand, personnel that always wear hearing protective equipment numbering 7 personnel (33.3% experienced hearing acurity depreciation and personnel who where not wear hearing protective equipment numbering 16 personnel (94.1% experienced hearing acurity depreciation.The study concluded that noise level in the administration division was under threshold limit value, in technical division between 08.00 – 16.00 and 16.00 – 24.00 was upper threshold limit value but between 24.00 – 08.00 was under threshold limit value. There was a different hearing acurity between administration division staff and the technical division staff. The study also enlighten there was association

An abnormal situation modeling method to assist operators in safety-critical systems

International Nuclear Information System (INIS)

Naderpour, Mohsen; Lu, Jie; Zhang, Guangquan

2015-01-01

One of the main causes of accidents in safety-critical systems is human error. In order to reduce human errors in the process of handling abnormal situations that are highly complex and mentally taxing activities, operators need to be supported, from a cognitive perspective, in order to reduce their workload, stress, and the consequent error rate. Of the various cognitive activities, a correct understanding of the situation, i.e. situation awareness (SA), is a crucial factor in improving performance and reducing errors. Despite the importance of SA in decision-making in time- and safety-critical situations, the difficulty of SA modeling and assessment means that very few methods have as yet been developed. This study confronts this challenge, and develops an innovative abnormal situation modeling (ASM) method that exploits the capabilities of risk indicators, Bayesian networks and fuzzy logic systems. The risk indicators are used to identify abnormal situations, Bayesian networks are utilized to model them and a fuzzy logic system is developed to assess them. The ASM method can be used in the development of situation assessment decision support systems that underlie the achievement of SA. The performance of the ASM method is tested through a real case study at a chemical plant. - Highlights: • Bayesian networks are applied to represent operators’ mental models when confront with abnormal situations. • A fuzzy logic system is used to resemble operators’ generating assessment results for every abnormal situation. • A virtual plant user interface and a prototype based on proposed method are developed to simulate a real case

Human-animal interactions and safety during dairy cattle handling--Comparing moving cows to milking and hoof trimming.

Science.gov (United States)

Lindahl, C; Pinzke, S; Herlin, A; Keeling, L J

2016-03-01

Cattle handling is a dangerous activity on dairy farms, and cows are a major cause of injuries to livestock handlers. Even if dairy cows are generally tranquil and docile, when situations occur that they perceive or remember as aversive, they may become agitated and hazardous to handle. This study aimed to compare human-animal interactions, cow behavior, and handler safety when moving cows to daily milking and moving cows to more rarely occurring and possibly aversive hoof trimming. These processes were observed on 12 Swedish commercial dairy farms. The study included behavioral observations of handler and cows and cow heart rate recordings, as well as recording frequencies of situations and incidents related to an increased injury risk to the handler. At milking, cows were quite easily moved using few interactions. As expected, the cows showed no behavioral signs of stress, fear, or resistance and their heart rate only rose slightly from the baseline (i.e., the average heart rate during an undisturbed period before handling). Moving cows to hoof trimming involved more forceful and gentle interactions compared with moving cows to milking. Furthermore, the cows showed much higher frequencies of behaviors indicative of aversion and fear (e.g., freezing, balking, and resistance), as well as a higher increase in heart rate. The risk of injury to which handlers were exposed also increased when moving cows to hoof trimming rather than to routine milking. Some interactions (such as forceful tactile interactions with an object and pulling a neck strap or halter) appeared to be related to potentially dangerous incidents where the handler was being kicked, head-butted, or run over by a cow. In conclusion, moving cows to hoof trimming resulted in higher frequencies of behaviors indicating fear, more forceful interactions, and increased injury risks to the handler than moving cows to milking. Improving potentially stressful handling procedures (e.g., by better animal handling

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

The handling of radiation accidents

International Nuclear Information System (INIS)

1977-01-01

The symposium was attended by 204 participants from 39 countries and 5 international organizations. Forty-two papers were presented in 8 sessions. The purpose of the meeting was to foster an exchange of experiences gained in establishing and exercising plans for mitigating the effects of radiation accidents and in the handling of actual accident situations. Only a small number of accidents were reported at the symposium, and this reflects the very high standards of safety that has been achieved by the nuclear industry. No accidents of radiological significance were reported to have occurred at commercial nuclear power plants. Of the accidents reported, industrial radiography continues to be the area in which most of the radiation accidents occur. The experience gained in the reported accident situations served to confirm the crucial importance of the prompt availability of medical and radiological services, particularly in the case of uptake of radioactive material, and emphasized the importance of detailed investigation into the causes of the accident in order to improve preventative measures. One of the principal themes of the symposium involved emergency procedures related to nuclear power plant accidents, and several papers defining the scope, progression and consequences of design base accidents for both thermal and fast reactor systems were presented. These were complemented by papers defining the resultant protection requirements that should be satisfied in the establishment of plans designed to mitigate the effects of the postulated accident situations. Several papers were presented describing existing emergency organizational arrangements relating both to specific nuclear power plants and to comprehensive national schemes, and a particularly informative session was devoted to the topic of training of personnel in the practical conduct of emergency arrangements. The general feeling of the participants was one of studied confidence in the competence and

Study of ITER equatorial port plug handling system and vacuum sealing interface

Energy Technology Data Exchange (ETDEWEB)

Martins, Jean-Pierre [Association Euratom CEA, CEA/DSM/IRFM, Cadarache, F-13108 Saint-Paul-lez-Durance (France)], E-mail: jean-pierre.martins@cea.fr; Doceul, Louis; Marol, Sebastien; Delchie, Elise [Association Euratom CEA, CEA/DSM/IRFM, Cadarache, F-13108 Saint-Paul-lez-Durance (France); Cordier, Jean-Jacques; Levesy, Bruno; Tesini, Alessandro [ITER International Organization, F-13108 Saint-Paul-lez-Durance cedex (France); Ciattaglia, Emanuela [EFDA CSU - Garching, Boltzmannstr. 2, D-85748 Garching (Germany); Tivey, Richard [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstr. 2, 85748 Garching (Germany); Gillier, Rene; Abbes, Christophe [GARLOCK - Sealing Technologies - 90, rue de la roche du Geai, F-42029 St-Etienne cedex 1 (France)

2009-06-15

In the field of the ITER port plug engineering and integration task, CEA has contributed to define proposals concerning the port plugs vacuum sealing interface with the vessel flange and the equatorial plug handling. The 2001 baseline vacuum flange sealing consisted of TIG welding of a 316L strip plate on to U shapes. This arrangement presented some issues like welding access, implementation of tools, lip consumption, complex local leak test, continuous leak checking. Therefore, an alternate sealing solution based on the use of metallic gaskets is proposed. The different technical aspects are discussed to explain how this design can simplify the maintenance and deal with safety and vacuum requirements. The design of the mechanical attachment and vacuum sealing of the plug has constantly evolved, but the associated remote handling equipment was not systematically reviewed. An update of the cask and maintenance procedure was studied in order to design it in accordance with the last generic plug flange design. This includes a concept of a gripping system that uses the plug flange bolting area and, to help the remote handling process, a cantilever assisting system is suggested to increase the reliability of the transfer operation between vacuum vessel and cask.

Design and technical status of the EU contribution to ITER

International Nuclear Information System (INIS)

Gasparotto, Maurizio; Federici, Gianfranco; Casci, Federico Riccardo

2009-01-01

Europe is involved in the procurement of most of the high-technology items for the ITER device (e.g. parts of the superconducting Toroidal (TF) and Poloidal Field (PF) coils, the vacuum vessel (VV), the in-vessel components, the remote handling, the additional heating systems, the tritium plant and cryoplant and finally parts of the diagnostics). In many cases the technologies required to manufacture these components are well established, in others there is still ongoing design and R and D work to select and optimise the final design solutions and to consolidate the underlying technologies as, for example, in the areas of heating and current drive, plasma diagnostics, shield blanket and first wall, remote handling, etc. A design review has recently been conducted by the ITER Organisation, with the support of the Domestic Agencies (DAs) established by the countries participating to ITER, to address the remaining outstanding technical issues and understand the associated implications for design, machine performance, schedule and cost. This paper provides an update of the design and technical status of EU contributions to ITER.

Handling trolley for Argonne M8, Pye Mo 1815, Pye Heavy Duty, etc. remote manipulators

International Nuclear Information System (INIS)

Roussel, E.; Labiche, M.; Chevallier, E.

1962-01-01

The removal and installation of remote manipulators and periscopes in hot cells are delicate operations requiring a specific handling trolley. This note describes the technical specifications of such a trolley having the following advantages: occupies a minimal space when not in use, easy and efficient fastening and monitoring, smooth moving of the remote manipulators during removal or installation, trolley stability and immobility during operation, requires only two operators

RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

International Nuclear Information System (INIS)

KOZLOWSKI, S.D.

2007-01-01

This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditions for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below

Dangerous wastes management in Cuba. Current situation and perspectives

International Nuclear Information System (INIS)

Alvarez Rossell, Silvia

2005-01-01

The appropriate handling of the dangerous waste has become a topic of high priority for all the countries and especially for those developing one that in general, they lack solid technical infrastructure, suitable technologies and human resources properly qualified to carry out this work without causing negative impacts on the environment. For these countries, this matter represents a true challenge, requiring you to have financial resources to create capacities and to acquire technologies, that which reality should be made with the support of the developed countries, but that up to now it doesn't stop to be a commitments without in the practice it is materialized in an effective way. The collaboration and the cooperation among the countries in development are also an useful road that should be increased. This work seeks to expose as Cuba it has faced this challenge, presenting the carried out actions, the confronted difficulties and the future actions that will be attacked so that the handling of dangerous waste doesn't constitute an environmental problem to solve

Designing Second Language Performance Assessments. Technical Report.

Science.gov (United States)

Norris, John M.; Brown, James Dean; Hudson, Thom; Yoshioka, Jim

This technical report focuses on the decision-making potential provided by second language performance assessments. First, performance assessment is situated within the broader discussion of alternatives in language assessment and in educational assessment in general. Next, issues in performance assessment design, implementation, reliability, and…

PGDP [Paducah Gaseous Diffusion Plant]-UF6 handling, sampling, analysis and associated QC/QA and safety related procedures

International Nuclear Information System (INIS)

Harris, R.L.

1987-01-01

This document is a compilation of Paducah Gaseous Diffusion Plant procedures on UF 6 handling, sampling, and analysis, along with associated QC/QA and safety related procedures. It was assembled for transmission by the US Department of Energy to the Korean Advanced Energy Institute as a part of the US-Korea technical exchange program

Minutes of Technical Division Steering Committee Meeting, September 13, 1955 -- Savannah River Laboratory

Energy Technology Data Exchange (ETDEWEB)

Evans, L.C.

1955-09-16

The Steering Committee approved 8 studies related to separation processes, analytical chemistry, waste handling, and recycle development. Safety and security issues were discussed. Appendices detail the financial status of the Technical Division and estimated man months for development studies approved for the Purex Process, tritium separations, thorium recycle, U-235 separations, and 100-, 200-, and 300-Area studies in analytical chemistry development. The status of 25 other Technical Division studies are listed along with their budget.

Analysis of ITER upper port plug remote handling maintenance scenarios

International Nuclear Information System (INIS)

Koning, J.F.; Baar, M.R. de; Elzendoorn, B.S.Q.; Heemskerk, C.J.M.; Ronden, D.M.S.; Schuth, W.J.

2012-01-01

Highlights: ► Remote Handling Study Centre: providing RH compatibility analysis. ► Simulation: virtual reality including kinematics and realtime physics simulator. ► Applied on analysis of RH compatibility of Upper Launcher component replacement. ► Resulting in lowered maintenance procedure time and lessons learned. - Abstract: The ITER tokamak has a modular design, with port plugs, blanket modules and divertor cassettes. This set-up allows for maintenance of diagnostics, heating systems and first wall elements. The maintenance can be done in situ, or in the Hot Cell. Safe and effective remote handling (RH) will be ensured by the RH requirements and standards. Compliance is verified through remote handling compatibility assessments at the ITER Design Review milestones. The Remote Handling Study Centre at FOM Institute DIFFER is created to study ITER RH maintenance processes at different levels of complexity, from relatively simple situational awareness checks using snap-shots in the CAD system, time studies using virtual reality (VR) animations, to extensive operational sequence validation with multiple operators in real-time. The multi-operator facility mimics an RH work-cell as presently foreseen in the ITER RH control room. Novel VR technology is used to create a realistic setting in which a team of RH operators can interact with virtual ITER environments. A physics engine is used to emulate real-time contact interaction as to provide realistic haptic feed-back. Complex interactions between the RH operators and the control room system software are tested. RH task performance is quantified and operational resource usage estimated. The article provides a description and lessons learned from a recent study on replacement of the Steering Mirror Assembly on the ECRH (Electron Cyclotron Resonance Heating) Upper Launcher port plug.

Analysis of ITER upper port plug remote handling maintenance scenarios

Energy Technology Data Exchange (ETDEWEB)

Koning, J.F., E-mail: j.f.koning@heemskerk-innovative.nl [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Baar, M.R. de; Elzendoorn, B.S.Q. [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Heemskerk, C.J.M. [Heemskerk Innovative Technology, Noordwijk (Netherlands); Ronden, D.M.S.; Schuth, W.J. [FOM Institute DIFFER - Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands)

2012-08-15

Highlights: Black-Right-Pointing-Pointer Remote Handling Study Centre: providing RH compatibility analysis. Black-Right-Pointing-Pointer Simulation: virtual reality including kinematics and realtime physics simulator. Black-Right-Pointing-Pointer Applied on analysis of RH compatibility of Upper Launcher component replacement. Black-Right-Pointing-Pointer Resulting in lowered maintenance procedure time and lessons learned. - Abstract: The ITER tokamak has a modular design, with port plugs, blanket modules and divertor cassettes. This set-up allows for maintenance of diagnostics, heating systems and first wall elements. The maintenance can be done in situ, or in the Hot Cell. Safe and effective remote handling (RH) will be ensured by the RH requirements and standards. Compliance is verified through remote handling compatibility assessments at the ITER Design Review milestones. The Remote Handling Study Centre at FOM Institute DIFFER is created to study ITER RH maintenance processes at different levels of complexity, from relatively simple situational awareness checks using snap-shots in the CAD system, time studies using virtual reality (VR) animations, to extensive operational sequence validation with multiple operators in real-time. The multi-operator facility mimics an RH work-cell as presently foreseen in the ITER RH control room. Novel VR technology is used to create a realistic setting in which a team of RH operators can interact with virtual ITER environments. A physics engine is used to emulate real-time contact interaction as to provide realistic haptic feed-back. Complex interactions between the RH operators and the control room system software are tested. RH task performance is quantified and operational resource usage estimated. The article provides a description and lessons learned from a recent study on replacement of the Steering Mirror Assembly on the ECRH (Electron Cyclotron Resonance Heating) Upper Launcher port plug.

Technical advisory panel for the large acceptance spectrometer: Final report

International Nuclear Information System (INIS)

1989-01-01

The Technical Advisory Panel for the Large Acceptance Spectrometer met on November 17--19, 1988, at CEBAF to perform a second review of the status of this project. The charge to the Panel was ''to provide technical advice to the CEBAF directorate on the design, construction, cost, schedule, and implementation of the Large Acceptance Spectrometer.'' In this written report, an overview of the entire project is given. Specific comments on the major components, data handling and analysis, assembly and installation, and management are presented. The Panel's conclusions are contained in the Executive Summary at the beginning of the report

TWRS safety and technical integration risk management plan

International Nuclear Information System (INIS)

Fordham, R.A.

1996-01-01

The objectives of the Tank Waste Remediation System (TWRS) Safety and Technical Integration (STI) programmatic risk management program are to assess, analyze, and handle risks associated with TWRS STI responsibilities and to communicate information about the actions being taken and the results to enable decision making. The objective of this TWRS STI Risk Management Plan is to communicate a consistent approach to risk management that will be used by the organization

Technical appraisal of the current situation in the field of radioactive waste management

International Nuclear Information System (INIS)

1985-01-01

Industrial activities are regarded as safe even though a small risk always exists. The philosophy of radiation protection accepts this and recognises that some level of risk will also be associated with safe radioactive waste management. Therefore the objective of radioactive waste management is to look for a strategy which, taken as a whole, is considered safe and provides an acceptable balance of all the radiological, technical, social, political and economic considerations. The RWMC's appraisal underlines the need for such a balance while concentrating on radiological and technical factors, particularly on the long term safety aspects of radioactive waste management. The fundamental conclusion is that detailed short and long term safety assessments can now be made which give confidence that radiation protection objectives can be met with currently available technology for most waste types, and at a cost which is only a small fraction of the overall cost of nuclear-generated power

EFFECT OF BASIC SKILLS IN ANY SITUATION TESTS ACCURACY YOUNG PLAYERS

Directory of Open Access Journals (Sweden)

Artan R. Kryeziu

2013-07-01

Full Text Available The paper aims to establish the impact of basic motor skills in some situational accuracy tests in youth basketball game. In a sample of 60 tested age of 17 year + / - 6 months. We have applied eigjt variables to the tested persons, five of which are predicting, while the other three are criterion tests. Connectivity between motor variables is handled through the correlation of Pearson. The impact of variables predicting in those criteria used in regression analysis. Also significant importance is given to the introduction of connectivity between basic motor skills in several accuracy tests typical for the basketball game situations. Regarding the basic motor skills variables have attained significant coherence, however situational space test throwing the ball in the basket in the same direction and shooting the ball in the basket in the corner 450 degres no coherence with any test has been shown from the space of the appility of basic motor skills. Through regression analysis procedure we’ve reviewed the impact of basic motor skills in some situational accuracy tests. Treat analysis of criterion variables in those predicting we can say that accuracy to situational variables impact junior league players had explosive force. Therefore we can conclude that explosive strength is a quite important factor in the game between young basketball players, with there moving actions the playes can achive their goal of scoring points.

30o inclination in handles of plastic boxes can reduce postural and muscular workload during handling

Directory of Open Access Journals (Sweden)

Luciana C. C. B. Silva

2013-06-01

Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.

Technical writing in America: A historical perspective

Science.gov (United States)

Connaughton, M. E.

1981-01-01

The standard distinction between poetic and referential language, the gulf between science and the humanities, and the distress many teachers of English feel when faced for the first time with the prospect of teaching technical writing are discussed. In the introduction of many technical writing textbooks. Technical communication is divorced from other forms of linguistic experience by making language limiting and reductive rather than creative and expansive. The emphasis on technical/scientific writing as radically different had blinded people to those traits it has in common with all species of composition and has led to a neglect of research, on fundamental rhetorical issues. A complete rhetorical theory of technical discourse should include information about the attitudes and motives of writers, the situations which motivate (or coerce) them to write, definitive features of technical style and form, interrelationship of expression and creativity, and functions of communication in shaping and preserving scientific networds and institutions. The previous areas should be explored with respect to contemporary practice and within an historical perspective.

New transport and handling contract

CERN Multimedia

SC Department

2008-01-01

A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319

Involving technical professionals in community relations

International Nuclear Information System (INIS)

Meyer, K.A.; Meyer, L.

1994-01-01

The Weldon Spring site Remedial Action Project (WSSRAP), a U.S. Department of Energy (DOE) environmental restoration project, has developed a successful community relations program that differs from the traditional approach and has built a general consensus about the DOE's work at the Weldon Spring site. The WSSRAP has a small, dedicated Community Relations Department that is heavily supported by technical professionals who receive intensive training in preparatory and presentation skills, role-playing, and critiquing of performances. This training allows the public to speak directly with the individuals responsible for remediation activities. The media, in turn, has access to technical individuals with good presentation skills, and WSSRAP managers can be confident that interactions are handled professionally. This approach results in a satisfied client. The WSSRAP's community relations program is a high-quality, cost-effective program that could be easily implemented by other facilities

A probabilistic safety analysis of UF{sub 6} handling at the Portsmouth Gaseous Diffusion Plant

Energy Technology Data Exchange (ETDEWEB)

Boyd, G.J.; Lewis, S.R.; Summitt, R.L. [Safety and Reliability Optimization Services (SAROS), Inc., Knoxville, TN (United States)

1991-12-31

A probabilistic safety study of UF{sub 6} handling activities at the Portsmouth Gaseous Diffusion Plant has recently been completed. The analysis provides a unique perspective on the safety of UF{sub 6} handling activities. The estimated release frequencies provide an understanding of current risks, and the examination of individual contributors yields a ranking of important plant features and operations. Aside from the probabilistic results, however, there is an even more important benefit derived from a systematic modeling of all operations. The integrated approach employed in the analysis allows the interrelationships among the equipment and the required operations to be explored in depth. This paper summarizes the methods used in the study and provides an overview of some of the technical insights that were obtained. Specific areas of possible improvement in operations are described.

CANONIC RELATION BASICO-MOTORICAL ABILITIES ON SITUATION SUCCESSFUL CHILDREN IN SMALL FOOTBALL

Directory of Open Access Journals (Sweden)

Izudin Tanović

2011-03-01

Full Text Available Football appertain to group polystructual sports, which characterize very big number different not standardize motorical abilities and technics which footballplayers execute in variable situations, begin intention or accidently during the game( Elsner,B.1985..For the difference of the big football,small football or Futsall presents game which is condition with very considerable space and time-limitation which are manifestate with very fast transformation of game from the phase of attack to phase of defence.Dinamic of game, difference of not-standaardize abilities, and application situation individual technic for successful deduction of actions request from player and very big level of psychocondition readiness. The aim of this exploration was to realize the level of influence basico-motorical abilities on situation successful in small football (Futsall game. Exploration is done on the children from the 12-14 years,at the school of small football in SFC “OT of MOSTAR”(OLD TOWN OF MOSTAR from the Mostar. Take into consideration strature characteristics and magnitude choosen pattern of children, and the target of exploration,processing the results are done with metod canonic-coleration analise. Final results of this exploration are characteristic for exploring strature,but also the same confirmation that exist statisticly very important binded between exploration spaces

Study of technical and financial pre-feasibility for the handling and sale, as fuel in cement industries, of petroleum coke produced at a petroleum refinery located in Moin, Limon

International Nuclear Information System (INIS)

Corrales Suarez, Jeffry

2013-01-01

A study of the technical and financial pre-feasibility is realized for the handling, conditioning and sale as fuel in cement industries of petroleum coke, that is produced in the project of extension and modernization of the refinery of RECOPE in Moin, Limon. Daily production has been of 570 metric tons. The market study has determined a demand of approximately 120 000 metric tons in the country and in the region. The total production of coke has been possible place it at national and regional level, due to lack of another producer. The coke is recommended to crush it to decrease the size of the particles for the conditioning, handling and to facilitate their manipulation. Conveyor belts are used for handling on the inside of the refinery. The coke is transported in trucks type tanker on the exterior of the refinery. The moisture content is reduced by dryer vibratory of fluidized bed to 5% of moisture to guarantee a product better quality. The product is stored under roof in ventilated facilities and with appropriate systems of security to minimize the risk of an accident. The fixed capital investment to develop the project has been of USD 3,1 millions and working capital of USD 14,4 millions. The financial evaluation is realized considering two financing models of 70% and without financing. The net present value (NPV) has been of USD -13,0 millions and the desirability index of -6,6 for the model with financing. The model without financing has obtained a NPV of USD -1,9 millions and a desirability index of -1,2. The financial profitability of the project has been very sensitive to the sales price of the coke, to the coke volume of production, to the growth percentage of the sale price and the cost of the raw material for the two models considered. The financial risk analysis is realized by the Monte Carlo method, whereupon is obtained a probability of approximately 34% in that the internal rate of return (IRR) has been higher than the cut rate and of 36% in that

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

Science.gov (United States)

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

Trends in Modern Exception Handling

Directory of Open Access Journals (Sweden)

Marcin Kuta

2003-01-01

Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

Identification and analysis of unsatisfactory psychosocial work situations: a participatory approach employing video-computer interaction.

Science.gov (United States)

Hanse, J J; Forsman, M

2001-02-01

A method for psychosocial evaluation of potentially stressful or unsatisfactory situations in manual work was developed. It focuses on subjective responses regarding specific situations and is based on interactive worker assessment when viewing video recordings of oneself. The worker is first video-recorded during work. The video is then displayed on the computer terminal, and the filmed worker clicks on virtual controls on the screen whenever an unsatisfactory psychosocial situation appears; a window of questions regarding psychological demands, mental strain and job control is then opened. A library with pictorial information and comments on the selected situations is formed in the computer. The evaluation system, called PSIDAR, was applied in two case studies, one of manual materials handling in an automotive workshop and one of a group of workers producing and testing instrument panels. The findings indicate that PSIDAR can provide data that are useful in a participatory ergonomic process of change.

Impact of sleep deprivation on anaesthesia residents' non-technical skills: a pilot simulation-based prospective randomized trial.

Science.gov (United States)

Neuschwander, A; Job, A; Younes, A; Mignon, A; Delgoulet, C; Cabon, P; Mantz, J; Tesniere, A

2017-07-01

Sleep deprivation is common in anaesthesia residents, but its impact on performance remains uncertain. Non-technical skills (team working, situation awareness, decision making, and task management) are key components of quality of care in anaesthesia, particularly in crisis situations occurring in the operating room. The impact of sleep deprivation on non-technical skills is unknown. We tested the hypothesis that in anaesthesia residents sleep deprivation is associated with impaired non-technical skills. Twenty anaesthesia residents were randomly allocated to undergo a simulation session after a night shift [sleep-deprived (SLD) group, n =10] or after a night of rest [rested (R) group, n =10] from January to March 2015. The simulated scenario was a situation of crisis management in the operating room. The primary end point was a composite score of anaesthetists' non-technical skills (ANTS) assessed by two blinded evaluators. Non-technical skills were significantly impaired in the SLD group [ANTS score 12.2 (interquartile range 10.5-13)] compared with the R group [14.5 (14-15), P technical skills of anaesthesia residents in a simulated anaesthesia intraoperative crisis scenario. NCT02622217. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Decree 2210: by means of which technical standards and allowed proceedings for radioactive material handling are issued

International Nuclear Information System (INIS)

1992-01-01

This Decree has the regulation and handling of radioactive material as object, in order to protect the health of people as well as the atmosphere. These regulations are applicable to: all natural or artificial person, public or private, that imports, manufacture, transport, store, trade, transfer or use with industrial, commercial, scientific, medical or any other aim; apparatuses capable to generate ionizing radiations whose quantum energy is superior to 5 k lo electron volts (KeV) or materials that contain radionuclides whose activities surpass the maxim exempt registration; notification and license concession. It includes: definitions; signalizing by means of basic symbol that must be included in all object, material and their mixtures, that emit ionizing radiations; control; production; import and export; trade; use; and transport of activities that involve materials and apparatuses capable to generate ionizing radiations; the category and labeled of bundles; the limits of activity for excepted bundles; the corresponding values for the different radionuclides; the limits of activity for the means of material haulage; the storage; and the handling of radioactive waste [es

Safety Analysis of 'Older/Aged' Handling and Transportation Equipment for Heavy Loads, Radioactive Waste and Materials in Accordance with German Nuclear Standards KTA 3902, 3903 and 3905

International Nuclear Information System (INIS)

Macias, P.; Prucker, E.; Stang, W.

2006-01-01

The purpose of this paper is to present a general safety analysis of important handling and transportation processes and their related equipment ('load chains' consisting of cranes, load-bearing equipment and load-attaching points). This project was arranged by the responsible Bavarian ministry for environment, health and consumer protection (StMUGV) in agreement with the power plant operators of all Bavarian nuclear power plants to work out potential safety improvements. The range of the equipment (e.g. reactor building, crane, refuelling machine, load-bearing equipment and load-attaching points) covers the handling and transportation of fuel elements (e. g. with fuel flasks), heavy loads (e.g. reactor pressure vessel closure head, shielding slabs) and radioactive materials and waste (e.g. waste flasks, control elements, fuel channels, structure elements). The handling equipment was subjected to a general safety analysis taking into account the ageing of the equipment and the progress of standards. Compliance with the current valid requirements of the state of science and technology as required by German Atomic Act and particularly of the nuclear safety KTA-standards (3902, 3903 and 3905) was examined. The higher protection aims 'safe handling and transportation of heavy loads and safe handling of radioactive materials and waste' of the whole analysis are to avoid a criticality accident, the release of radioactivity and inadmissible effects on important technical equipment and buildings. The scope of the analysis was to check whether these protection aims were fulfilled for all important technical handling and transportation processes. In particularly the design and manufacturing of the components and the regulations of the handling itself were examined. (authors)

Non-technical skills in histopathology: definition and discussion.

Science.gov (United States)

Johnston, Peter W; Fioratou, Evie; Flin, Rhona

2011-09-01

Health care is a high-risk industry, with most documented adverse incidents being associated with 'human factors' including cognitive and social skills termed 'non-technical skills'. Non-technical skills complement the diagnostic and specialist skills and professional attributes required by medical practitioners, including histopathologists, and can enhance the quality of practice and delivery of health-care services and thus contribute to patient safety. This review aims to introduce histopathologists to non-technical skills and how these pertain to everyday histopathological practice. Drawing from other domains in medicine, specifically anaesthesia and surgery, a variety of non-technical skills are identified and described in the context of histopathology to illustrate the role each plays, often collectively, in daily practice. The generic non-technical skills are defined as situation awareness, decision-making, communication, teamwork, leadership, managing stress and coping with fatigue. Example scenarios from histopathology are presented and the contributions to outcomes made by non-technical skills are explained. Consideration of these specific non-technical skills as a component in histopathology training may benefit practitioners as well as assuring patient safety. © 2011 Blackwell Publishing Limited.

Risk assessment related to manual handling on choosen work possition in foundry Alstom Power Sp. z o. o.

Directory of Open Access Journals (Sweden)

G. Kowal

2010-04-01

Full Text Available Manual handling remains one of the different types of transport inside working place, although technological progress and modernorganization of work. Manual transport as a transport inside working place is related to foundry industry. According to polish lawregulations employer has to give consideration to manual handling in professional risk assessment and introduce actions for manualhandling reduction. In Foundry Elblag case there is found that in many processes manual handling are made by workers. For example wecan choose melting processes (additives manual feeding, mixing and pulling metallurgical slag, etc. or fettling processes like grinding.Objective of that analysis was to define level of risk related to manual handling in work stand chosen and define activities impacted onrisk assessment result with biggest range. For risk reduction, technical and organizational solutions were shown (better ergonomically work stand, method of work and worker’s awareness about good practices. In this study methods related to manual handling risk assessment were described, focus on KIM method used in Foundry Elblag. Key Item Method allow to estimate the risk by simple calculation based on key indicators (time rating points, rating points of mass, posture or work condition. Points were chosen based on timekeeping, information from workers and foreman.

Emergency response technical centre of the IPSN

International Nuclear Information System (INIS)

Dallendre, R.

2000-01-01

The Institute for Nuclear Safety and Protection (IPSN), the technical support of the French nuclear safety authority, provides the technical support needed for protect the surrounding population from the consequences of radioactive releases. In the event of an accident arising at a nuclear facility, the IPSN would set up an Emergency Response Technical Centre (CTC) at Fontenay-aux-Roses. The IPSN's objectives are: (a) to diagnose the state of the nuclear facility and monitor its development, (b) to prepare prognosis for the evolution of the accident and to give an estimation of the associated consequences according to the situation evolution, (c) to estimate the risk of radioactive releases and the consequences on man and on the environment, mainly on the basis of weather forecasts and on the prognosis. This diagnosis-prognosis approach is build-up with the information on the state of the installation given by: the concerned site via audio-conference system and telescope, the security panels of the nuclear plant via networks. To perform its missions, the CTC, which has to be both safe and secure, uses multiple telecommunication resources to dialogue with partners and also mapping computer systems, data bases and software tools: (a) the SESAME system, which gives, during an accident of a PWR, a calculation method for the diagnosis-prognosis aforesaid, (b) the CONRAD system, which calculates the atmospheric dispersal of radioactive substances and consequences in the environment in the early phase of an accident, (c) the ASTRAL code, which allows to cope with long lasting situations. In order to be operational, the IPSN expert regularly undergo training in emergency situation management and participate in exercises organised by the government authorities. (author)

Present situation of unused uranium fuel in Tokyo Institute of Technology

International Nuclear Information System (INIS)

Obara, T.; Ogawa, M.

2008-01-01

Present situation of unused enriched uranium fuel in Tokyo Institute of Technology is described. The fuels were for sub-critical experiments. There is no special facility for transportation in the site. But there is no technical problem for it. One of the important issues to be done is a duty by national regulation against nuclear disaster. (author)

System design for safe robotic handling of nuclear materials

International Nuclear Information System (INIS)

Drotning, W.; Wapman, W.; Fahrenholtz, J.; Kimberly, H.; Kuhlmann, J.

1996-01-01

Robotic systems are being developed by the Intelligent Systems and Robotics Center at Sandia National Laboratories to perform automated handling tasks with radioactive nuclear materials. These systems will reduce the occupational radiation exposure to workers by automating operations which are currently performed manually. Because the robotic systems will handle material that is both hazardous and valuable, the safety of the operations is of utmost importance; assurance must be given that personnel will not be harmed and that the materials and environment will be protected. These safety requirements are met by designing safety features into the system using a layered approach. Several levels of mechanical, electrical and software safety prevent unsafe conditions from generating a hazard, and bring the system to a safe state should an unexpected situation arise. The system safety features include the use of industrial robot standards, commercial robot systems, commercial and custom tooling, mechanical safety interlocks, advanced sensor systems, control and configuration checks, and redundant control schemes. The effectiveness of the safety features in satisfying the safety requirements is verified using a Failure Modes and Effects Analysis. This technique can point out areas of weakness in the safety design as well as areas where unnecessary redundancy may reduce the system reliability

Assessment of internal doses in emergency situations

Energy Technology Data Exchange (ETDEWEB)

Rahola, T.; Muikku, M. [Radiation and Nuclear Safety Authority - STUK (Finland); Falk, R.; Johansson, J. [Swedish Radiation Protection Authority - SSI (Sweden); Liland, A.; Thorshaug, S. [NRPA (Norway)

2006-04-15

The need for assessing internal radiation doses in emergency situations was demonstrated after accidents in Brazil, Ukraine and other countries. Lately more and more concern has been expressed regarding malevolent use of radiation and radioactive materials. The scenarios for such use are more difficult to predict than for nuclear power plant or weapons accidents. Much of the results of the work done in the IRADES project can be adopted for use in various accidental situations involving radionuclides that are not addressed in this report. If an emergency situation occurs in only one or a few of the Nordic countries, experts from the other countries could be called upon to assist in monitoring. A big advantage is then our common platform. In the Nordic countries much work has been put down on quality assurance of measurements and on training of dose assessment calculations. Attention to this was addressed at the internal dosimetry course in October 2005. Nordic emergency preparedness exercises have so far not included training of direct measurements of people in the early phase of an emergency. The aim of the IRADES project was to improve the preparedness especially for thyroid measurements. The modest financial support did not enable the participants to make big efforts but certainly acted as a much appreciated reminder of the importance of being prepared also to handle situations with malevolent use of radioactive materials. It was left to each country to decide to which extent to improve the practical skills. There is still a need for detailed national implementation plans. Measurement strategies need to be developed in each country separately taking into account national regulations, local circumstances and resources. End users of the IRADES report are the radiation protection authorities. (au)

Assessment of internal doses in emergency situations

International Nuclear Information System (INIS)

Rahola, T.; Muikku, M.; Falk, R.; Johansson, J.; Liland, A.; Thorshaug, S.

2006-04-01

The need for assessing internal radiation doses in emergency situations was demonstrated after accidents in Brazil, Ukraine and other countries. Lately more and more concern has been expressed regarding malevolent use of radiation and radioactive materials. The scenarios for such use are more difficult to predict than for nuclear power plant or weapons accidents. Much of the results of the work done in the IRADES project can be adopted for use in various accidental situations involving radionuclides that are not addressed in this report. If an emergency situation occurs in only one or a few of the Nordic countries, experts from the other countries could be called upon to assist in monitoring. A big advantage is then our common platform. In the Nordic countries much work has been put down on quality assurance of measurements and on training of dose assessment calculations. Attention to this was addressed at the internal dosimetry course in October 2005. Nordic emergency preparedness exercises have so far not included training of direct measurements of people in the early phase of an emergency. The aim of the IRADES project was to improve the preparedness especially for thyroid measurements. The modest financial support did not enable the participants to make big efforts but certainly acted as a much appreciated reminder of the importance of being prepared also to handle situations with malevolent use of radioactive materials. It was left to each country to decide to which extent to improve the practical skills. There is still a need for detailed national implementation plans. Measurement strategies need to be developed in each country separately taking into account national regulations, local circumstances and resources. End users of the IRADES report are the radiation protection authorities. (au)

Control of radiation sources and general regulations for accidental situations

International Nuclear Information System (INIS)

Slimani, A.

1998-01-01

In order to prevent accidents caused by application of radiation sources the Tunisian O.N.P.C. established straightforward strategy made up of 3 phases: prevention, planning and intervention. Civil Protection conducts prevention studies of all radiation sources by examining normal application conditions as well as possible accidental situations. It keeps up with scientific, technical and statistical aspects of radiation risks, elaborates specific plans and programs for intervention operations and cooperates with administrative and security services as well as international organisations. The O.N.P.C. established a model intervention plan based on observation (according to preliminary information), evaluation of the situation (according to the head of operation) intervention (specialized units) and post intervention (testing of personnel)

Occupational health physicians have better work conditions for handling sickness certification compared with general practitioners: results from a nationwide survey in Sweden.

Science.gov (United States)

Ljungquist, Therese; Alexanderson, Kristina; Kjeldgård, Linnea; Arrelöv, Britt; Nilsson, Gunnar H

2015-02-01

To study whether occupational health physicians (OPs) have a better work situation regarding handling of sickness certification compared with other physicians, in particular general practitioners (GPs), and to analyze associations between OPs' experiences of assessing and providing a long-term prognosis of patients' work capacity and some potentially interrelated factors. Answers to a nationwide survey from physicians who had sickness certification consultations at least once monthly were analyzed. Differences among OPs (n=481), GPs (n=4257) and physicians working in other clinical settings (n=9452) were estimated by chi square tests. Associations between OPs' experiences as above and potentially interrelated factors were estimated using logistic regression analyses. Among OPs, a lower proportion experienced clinical work situations related to sickness certifications as 'very problematic', compared with the other physicians, and especially so compared with GPs. A higher proportion of OPs also had organizational support for handling sickness certifications. For OPs, experience of sickness certification consultations as problematic once a month or less often, not experiencing sickness certification tasks as a work environment problem, and having a well-established workplace policy regarding sickness certification matters were significantly positively associated with finding assessing and providing a long-term prognosis of work capacity as 'not at all/somewhat problematic'. OPs' work situation regarding sickness certifications was favorable compared with that of other physicians, and especially compared with that of GPS. Our results underline the importance of organizational support for ensuring physicians' experience of having professional competence in handling assessments of patients' work capacity. © 2014 the Nordic Societies of Public Health.

TECHNICAL RISK RATING OF DOE ENVIRONMENTAL PROJECTS - 9153

International Nuclear Information System (INIS)

Cercy, M.; Fayfich, Ronald; Schneider, Steven P.

2008-01-01

The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. The scope of work is diverse, with projects ranging from single acquisitions to collections of projects and operations that span several decades and costs from hundreds of millions to billions US$. The need to be able to manage and understand the technical risks from the project to senior management level has been recognized as an enabler to successfully completing the mission. In 2008, DOE-EM developed the Technical Risk Rating as a new method to assist in managing technical risk based on specific criteria. The Technical Risk Rating, and the criteria used to determine the rating, provides a mechanism to foster open, meaningful communication between the Federal Project Directors and DOE-EM management concerning project technical risks. Four indicators (technical maturity, risk urgency, handling difficulty and resolution path) are used to focus attention on the issues and key aspects related to the risks. Pressing risk issues are brought to the forefront, keeping DOE-EM management informed and engaged such that they fully understand risk impact. Use of the Technical Risk Rating and criteria during reviews provides the Federal Project Directors the opportunity to openly discuss the most significant risks and assists in the management of technical risks across the portfolio of DOE-EM projects. Technical Risk Ratings can be applied to all projects in government and private industry. This paper will present the methodology and criteria for Technical Risk Ratings, and provide specific examples from DOE-EM projects

Safety of Cargo Aircraft Handling Procedure

Directory of Open Access Journals (Sweden)

Daniel Hlavatý

2017-07-01

Full Text Available The aim of this paper is to get acquainted with the ways how to improve the safety management system during cargo aircraft handling. The first chapter is dedicated to general information about air cargo transportation. This includes the history or types of cargo aircraft handling, but also the means of handling. The second part is focused on detailed description of cargo aircraft handling, including a description of activities that are performed before and after handling. The following part of this paper covers a theoretical interpretation of safety, safety indicators and legislative provisions related to the safety of cargo aircraft handling. The fourth part of this paper analyzes the fault trees of events which might occur during handling. The factors found by this analysis are compared with safety reports of FedEx. Based on the comparison, there is a proposal on how to improve the safety management in this transportation company.

Technical and tactical soccer players' performance in conceptual small-sided games

Directory of Open Access Journals (Sweden)

Cristian Javier Ramirez Lizana

2015-09-01

Full Text Available AbstractConceptual small-sided games (CSSGs may be interesting as a methodology for training soccer players given its connection to the unpredictability that is inherent to soccer. Our aim was investigate, through videogrammetry, if the technical and tactical principles promoted through the adoption of distinct rules from two distinct CSSGs (maintaining ball possession; and progression to the target would actually be achieved. The study included 24 athletes assigned to 6-player teams. Our data showed that the CSSGs' organising principles create situations with differing levels of difficulty that obey the propositions of maintaining ball possession and progression to the target, i.e., CSSGs permit systematic training on technical and tactical components in order to emphasize the concepts adopted in this study in games context. Our data credit the CSSGs for teaching technical and tactical lessons that, when coupled with adequate physical conditioning, can facilitate a player's capacity to merge thoughts and events in different situations.

Use of technical skills and medical devices among new registered nurses: A questionnaire study.

Science.gov (United States)

Ewertsson, Mona; Gustafsson, Margareta; Blomberg, Karin; Holmström, Inger K; Allvin, Renée

2015-12-01

One comprehensive part of nursing practice is performing technical skills and handling of medical equipment. This might be challenging for new registered nurses (RNs) to do in patient-safe way. The aim of this study was to describe and compare the extent to which new RNs perform various technical skills and handle medical devices in different settings, and to investigate their possibility for continued learning in this respect. A further aim was to describe their perceptions of incident reporting related to technical skills and medical devices. A cross-sectional study with descriptive and comparative design. RNs who recently graduated from a nursing programme at three Swedish universities and had worked as a RN for up to 1 year were included in the study (n=113, response rate 57%). Data were collected by means of a postal questionnaire. Half of the RNs reported that they performed several of the listed tasks every day or every week, regardless of workplace. These tasks were most frequently performed in surgical departments. The majority of the participants (76%) stated a need of continued practical training. However, less than half of them (48%) had access to a training environment. Several participants (43%) had been involved in incidents related to technical skills or medical devices, which were not always reported. Nearly a third of the participants (31%) did not use the existing guidelines when performing technical skills, and reflection on performance was uncommon. This study highlights the importance of shared responsibilities between nurse educators and health care employers to provide learning opportunities for new RNs in technical skills, to maintain patient safety. To increase the safety culture where nursing students and new RNs understand the importance of using evidence-based guidelines and taking a reflective approach in the performance of technical tasks is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Failure Mode and Effect Analysis for remote handling transfer systems of ITER

International Nuclear Information System (INIS)

Pinna, T.; Caporali, R.; Tesini, A.

2008-01-01

A Failure Mode and Effect Analysis (FMEA) at component level was done to study safety-relevant implications arising from possible failures in performing remote handling (RH) operations at ITER facility . Autonomous air cushion transporter, pallet, sealed casks and tractor movers needed for port plug mounting/dismantling operation were analysed. For each sub-system, the breakdown of significant components was outlined and, for each component, possible failure modes have been investigated pointing out possible causes, possible actions to prevent the causes, consequences and actions to prevent or mitigate consequences. Off-normal events which may result in hazardous consequences to the public and the environment have been defined as Postulated Initiating Events (PIEs). Two safety-relevant PIEs have been defined by assessing elementary failures related to the analysed system. Each PIE has been discussed in order to qualitatively identify accident sequences arising from each of them. As an output of this FMEA study, possible incidental scenarios, where the intervention of rescue RH equipments is required to overcome critical situations determined by fault of RH components, were defined as well. Being rescue scenarios of main concern for ITER remote handling activities, such families could be helpful in defining the design requirements of port handling systems in general and on RH transfer system in particular. Furthermore, they could be useful in defining casks and vehicles to be used for rescue activities

Technical specifications of variable speed motors for negative pressure control in hot cell area

Energy Technology Data Exchange (ETDEWEB)

Kim, Seon Duk; Bang, H. S.; Cho, W. K

2002-01-01

Hot cells are the facilities for handling the high radioactive materials and various R and D activities are performed using hot cells. Therefore the control of air flow in hot cell area is very important technology and it is started with the variable speed motor(VSM) controlling the air handling system in that area. This report describes various technical aspects of VS motors and will be useful for understanding the practical technologies of VS motors and also for optimization of the negative pressure controls in hot cell area.

Indonesia municiple solid waste life cycle and environmental monitoring: current situation, before and future challenges

Science.gov (United States)

Susmono

2017-03-01

, both technically and non technically aspects such as new appropriate technology development, new integration management especially between formal and informal organizations, acceleration of community education/empowerment, new required regulations development and law enforcement support. Political will of government. In the beginning, government and people of Indonesia follow the paradigm that municipal solid waste management could be managed by Collecting-Transferring-Dumping system only. This paradigm is appropriate if no problem increase of land providing for solid waste dumping site. Most of local governments are not able to decide it because so many aspects and complexity of problems such as choosing an appropriate technology, finding location for solid waste transfer stations and dumping site, developing of waste management, limitation of affordability, improving people behaviour to increase their low health environment consciousness, as well as lack of professional staffs. Indonesia Ministry of Environment who is responsible for solid waste handling regulations and Ministry of Public Works who is responsible for urban infrastructures development have changed their paradigm that in municipal solid waste handling it is better to reduce as soon as possible. The new approach is to introduce 3R methods from the sources to the solid waste dumping site for minimizing cost of transportation and dumping site area. The Municipal Solid Waste Management Law no 18/2008 stated that municipal solid waste handling consists of Reduction-Reuse-Recycling of waste and running waste management services such as collection of the rest to transport, treat and dumping in the end of the system. Based on the Autonomous Law, the local governments are still the main responsible governments to handle municipal solid waste management in their administrative area. Community participation. During the last few years many solid waste communal and non-governmental organizations were grown and

Safety goals - a vital challenge to our society

International Nuclear Information System (INIS)

Schneider, T.

1987-01-01

In the past decades systematic approaches and tools to analyze the technical aspects of safety problems have been developed and continuously improved. We summarize these tools under the term of risk analysis. If applied in a proper and sensible way risk analysis helps technical experts to gain considerably better understanding of the performance of technical systems. Today the main open questions concerning safety are not technical ones. We hear complaints from many different sides concerning the actual handling of technological risks, but the efforts to change this situation are still rather limited. The author makes some rather general comments on today's situation and on some ideas about what we could and maybe should do for further progress. In addition he illustrates what kind of considerations seems necessary. (orig./HSCH)

Ergonomics and patient handling.

Science.gov (United States)

McCoskey, Kelsey L

2007-11-01

This study aimed to describe patient-handling demands in inpatient units during a 24-hour period at a military health care facility. A 1-day total population survey described the diverse nature and impact of patient-handling tasks relative to a variety of nursing care units, patient characteristics, and transfer equipment. Productivity baselines were established based on patient dependency, physical exertion, type of transfer, and time spent performing the transfer. Descriptions of the physiological effect of transfers on staff based on patient, transfer, and staff characteristics were developed. Nursing staff response to surveys demonstrated how patient-handling demands are impacted by the staff's physical exertion and level of patient dependency. The findings of this study describe the types of transfers occurring in these inpatient units and the physical exertion and time requirements for these transfers. This description may guide selection of the most appropriate and cost-effective patient-handling equipment required for specific units and patients.

Potential Indoor Worker Exposure From Handling Area Leakage: Example Event Sequence Frequency Analysis

International Nuclear Information System (INIS)

Benke, Roland R.; Adams, George R.

2008-01-01

The U.S. Department of Energy (DOE) is currently considering design options for the facilities that will handle spent nuclear fuel and high-level radioactive waste at the potential nuclear waste repository at Yucca Mountain, Nevada. The license application must demonstrate compliance with the performance objectives of 10 CFR Part 63, which include occupational dose limits from 10 CFR Part 20. If DOE submits a license application under 10 CFR Part 63, the U.S. Nuclear Regulatory Commission (NRC) will conduct a risk-informed, performance-based review of the DOE license application and its preclosure safety analysis, in which in-depth technical evaluations are focused on technical areas that are significant to preclosure safety and risk. As part of pre-licensing activities, the Center for Nuclear Waste Regulatory Analyses (CNWRA) developed the Preclosure Safety Analysis Tool software to aid in the regulatory review of a DOE license application and support any independent confirmatory assessments that may be needed. Recent DOE information indicates a primarily canister-based handling approach that includes the wet transfer of individual assemblies where Heating, Ventilation, and Air Conditioning (HVAC) systems may be relied on to provide confinement and limit the spread of any airborne radioactive material from handling operations. Workers may be involved in manual and remote operations in handling transportation casks, canisters, waste packages, or bare spent nuclear fuel assemblies inside facility buildings. As part of routine operations within these facilities, radioactive material may potentially become airborne if canisters are opened or bare fuel assemblies are handled. Leakage of contaminated air from the handling area into adjacent occupied areas, therefore, represents a potential radiological exposure pathway for indoor workers. The objective of this paper is to demonstrate modeling capabilities that can be used by the regulator to estimate frequencies of

Equipment for the handling of thorium materials

International Nuclear Information System (INIS)

Heisler, S.W. Jr.; Mihalovich, G.S.

1988-01-01

The Feed Materials Production Center (FMPC) is the United States Department of Energy's storage facility for thorium. FMPC thorium handling and overpacking projects ensure the continued safe handling and storage of the thorium inventory until final disposition of the materials is determined and implemented. The handling and overpacking of the thorium materials requires the design of a system that utilizes remote handling and overpacking equipment not currently utilized at the FMPC in the handling of uranium materials. The use of remote equipment significantly reduces radiation exposure to personnel during the handling and overpacking efforts. The design system combines existing technologies from the nuclear industry, the materials processing and handling industry and the mining industry. The designed system consists of a modified fork lift truck for the transport of thorium containers, automated equipment for material identification and inventory control, and remote handling and overpacking equipment for material identification and inventory control, and remote handling and overpacking equipment for repackaging of the thorium materials

Development of a Behavioural Marker System for Rating Cadet’s Non-Technical Skills

Directory of Open Access Journals (Sweden)

Victor Fernando PlÁcido da ConceiçÌo

2017-06-01

Full Text Available Despite the adoption of crew resource management training for bridge teams over the last decades, the training is still heavily focussed on technical achievements. In an educational context, the situation is more problematical, since with requirement of developing the technical skills, there is a need to build and evaluate the non-technical skills of cadets with little experience in bridge team management. In parallel with the application of team leadership models, the Portuguese Naval Academy conducted a research to improve the development and assessment of non-technical skills in bridge simulators. This paper describes the method used to identify the key non-technical skills required for naval cadets and to develop a behavioural marker system for their measurement. A literature review of behavioural marker systems was supplemented with an analysis of interviews conducted with students and simulator instructors. Additionally, further analysis of Portuguese Navy accidents reports was made, applying the HFACS framework to identify the relevant non-technical skills involved in the accidents. The resulting rating system covers five skill categories (leadership, situational awareness, communication, team work and decision making, each one with three rating elements. The framework is currently under evaluation tests in bridge simulators sessions, within an educational context.

Non-technical skills of the operating theatre scrub nurse: literature review.

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

Does revealing contextual knowledge of the patient's intention help nurses' handling of nurse calls?

Science.gov (United States)

Klemets, Joakim; Toussaint, Pieter

2016-02-01

An inherent part of nurses' work is to handle nurse calls that often cause challenging interruptions to ongoing activities. In situations when nurses are interrupted by a nurse call, they need to decide whether to continue focusing on the task at hand or to abort and respond to the nurse call. The difficult decision is often influenced by a number of factors and can have implications for patient safety and quality of care. The study investigates how technology could be designed to support nurses' handling of nurse calls by allowing patients to communicate a more contextualised message revealing their intention to the nurse when issuing a nurse call. Through a qualitative methodology employing a scenario-based design approach, three different nurse call system concepts are evaluated by nurses from different departments of a Norwegian university hospital. Nurses find the uncertainty of not knowing the reason behind a nurse call stressful in situations where they are required to prioritise either the calling patient or a patient they are currently nursing. Providing information about a patient's intention behind a nurse call influences the nurse's decision to various degrees depending on the situation in which they find themselves and the information that is communicated. The nurses' reflections suggested that the message communicated should be designed to contain neither too little nor too much information about the patient's needs. A nurse call system that allows nurses to discern the reason behind a nurse call allows them to make a more accurate decision and relieves stress. In particular, the information communicated would reduce uncertainty and lessen nurses' dependence on other factors in their decision. The design of such a system should, however, carefully consider the needs of the department in which it is deployed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Safety Domain Measurement for Vessels in an Overtaking Situation

Directory of Open Access Journals (Sweden)

Hua-Zhi Hsu

2014-12-01

Full Text Available Marine traffic engineering has been pushed to the limits due to a rising demand in the shipping business. Merchant ships are growing dramatically, both in numbers and in size. To keep pace with current developments, automation seems to be one viable option when it comes to keeping ships running with fewer seafarers available. The aim of this paper is to monitor a modern day mariners’ performance while working in a tense situation. The objective is to define the size of the safety domain whilst overtaking a vessel. The approach was to assess the ship's domain area within a 3 nm wide traffic separation scheme by using a ship handling simulator. From the simulation results, an overtaking domain was determined as 1.36 nm long and 0.4 nm wide. Safety domains in real-life situations were experienced on a much smaller scale compared to the previous findings. The working load for this particular operation is expected to be stressful and highly skilled orientated.

How to Handle Abuse

Science.gov (United States)

... Handle Abuse KidsHealth / For Kids / How to Handle Abuse What's in this article? Tell Right Away How Do You Know Something Is Abuse? ... babysitter, teacher, coach, or a bigger kid. Child abuse can happen anywhere — at ... building. Tell Right Away A kid who is being seriously hurt ...

Capturing socio-technical systems with agent-based modelling

NARCIS (Netherlands)

Van Dam, K.H.

2009-01-01

What is a suitable modelling approach for socio-technical systems? The answer to this question is of great importance to decision makers in large scale interconnected network systems. The behaviour of these systems is determined by many actors, situated in a dynamic, multi-actor, multi-objective and

Waste Handling Building Conceptual Study

International Nuclear Information System (INIS)

G.W. Rowe

2000-01-01

The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable, and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system

Practices of Handling

DEFF Research Database (Denmark)

Ræbild, Ulla

to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...... introduces four ways whereby fashion designers apply their own bodies as tools for design; a) re-activating past garment-design experiences, b) testing present garment-design experiences c) probing for new garment-design experiences and d) design of future garment experiences by body proxy. The paper...

Foundations for technical solutions in organizing excavation of open ore pits

OpenAIRE

С. И. Фомин

2016-01-01

To study stochastic mining technical systems of opencast mines, where parallel to clearly defined values random and indefinite factors operate, probabilistic and statistical techniques are mostly used nowadays. Formally, the task of producing a design solution may, under the conditions of indeterminacy be transformed into an equivalent deterministic problem formulated for a risky situation. Uncertainty in the initial mining, geological and technical-economic information available during t...

Protecting safeguards information / Division of technical support

International Nuclear Information System (INIS)

2002-01-01

This DVD contains two films representing the key aspects of the IAEA Department of Safeguards. 'Protecting Safeguards Information' is a narrative/fiction film which presents the Agency's information handling and protection measures. A security representative from a fictional nation receives a briefing on the procedures and methods used by the Department. These techniques will assure member states that the information they provide to the Agency is kept safe and confidential. 'Division of Technical Support' is a non-fiction documentary which presents a detailed look at the technical capabilities and management techniques used by the Agency in nuclear material accountancy. The film covers many aspects of safeguards equipment and techniques including: NDA and DA instruments, seals, surveillance, training, development and maintenance. Taken together, these films provide an introduction and overview to many important aspects of the IAEA Department of Safeguards. (IAEA)

The future energy situation in the Netherlands

International Nuclear Information System (INIS)

1980-01-01

This book is the result of a study into the future energy situation in the Netherlands, performed by the electricity companies in the country. The first five chapters sketch the framework within which energy policy is currently forced to operate. Further technical and physical conditions are considered in the following six chapters, including environmental and safety aspects. A prognosis for energy demand in the Netherlands until the end of the century is presented and five different scenarios are discussed, as means of supplying this demand. Nuclear energy is one of the sources considered throughout the text. (C.F.)

Strategies for Handling Missing Data with Maximum Likelihood Estimation in Career and Technical Education Research

Science.gov (United States)

Lee, In Heok

2012-01-01

Researchers in career and technical education often ignore more effective ways of reporting and treating missing data and instead implement traditional, but ineffective, missing data methods (Gemici, Rojewski, & Lee, 2012). The recent methodological, and even the non-methodological, literature has increasingly emphasized the importance of…

Using Television Technology to Teach Technical Writing.

Science.gov (United States)

Wallisch, Bill

Technical writing teachers at the U.S. Air Force Academy enhance student motivation by bringing real Air Force writing situations into the classroom through short videotapes which allow students to see how scientists and engineers cope with report writing in their daily work. Also, a special English honors course, which is part of the "Blue…

SRV-automatic handling device

International Nuclear Information System (INIS)

Yamada, Koji

1987-01-01

Automatic handling device for the steam relief valves (SRV's) is developed in order to achieve a decrease in exposure of workers, increase in availability factor, improvement in reliability, improvement in safety of operation, and labor saving. A survey is made during a periodical inspection to examine the actual SVR handling operation. An SRV automatic handling device consists of four components: conveyor, armed conveyor, lifting machine, and control/monitoring system. The conveyor is so designed that the existing I-rail installed in the containment vessel can be used without any modification. This is employed for conveying an SRV along the rail. The armed conveyor, designed for a box rail, is used for an SRV installed away from the rail. By using the lifting machine, an SRV installed away from the I-rail is brought to a spot just below the rail so that the SRV can be transferred by the conveyor. The control/monitoring system consists of a control computer, operation panel, TV monitor and annunciator. The SRV handling device is operated by remote control from a control room. A trial equipment is constructed and performance/function testing is carried out using actual SRV's. As a result, is it shown that the SRV handling device requires only two operators to serve satisfactorily. The required time for removal and replacement of one SRV is about 10 minutes. (Nogami, K.)

Mapping the Strategic Thinking of Public Relations Managers in a Crisis Situation: An Illustrative Example Using Conjoint Analysis.

Science.gov (United States)

Bronn, Peggy Simcic; Olson, Erik L.

1999-01-01

Illustrates the operationalization of the conjoint analysis multivariate technique for the study of the public relations function within strategic decision making in a crisis situation. Finds that what the theory describes as the strategic way of handling a crisis is also the way each of the managers who were evaluated would prefer to conduct…

Grain Handling and Storage.

Science.gov (United States)

Harris, Troy G.; Minor, John

This text for a secondary- or postecondary-level course in grain handling and storage contains ten chapters. Chapter titles are (1) Introduction to Grain Handling and Storage, (2) Elevator Safety, (3) Grain Grading and Seed Identification, (4) Moisture Control, (5) Insect and Rodent Control, (6) Grain Inventory Control, (7) Elevator Maintenance,…

The management of radioactive wastes produced by radioisotope users. Technical addendum

International Nuclear Information System (INIS)

1966-01-01

This Addendum contains detailed technical information on processes and procedures that are outlined in more general terms in the Code of Practice. The information is particularly relevant to the problem of handling the relatively small quantities of waste arising from the use of radionuclides in laboratories, hospitals and industry when no special facilities for radioactive waste treatment are available on site. The Addendum is directed toward providing the radioisotope user with the type and amount of information required for him to be able to assess the alternatives available to him in terms of his particular needs, develop a preliminary design of an optimum waste-handling system and get help and guidance in his search for more detailed information.

Potential exposure to Australian bat lyssavirus is unlikely to prevent future bat handling among adults in South East Queensland.

Science.gov (United States)

Young, M K; Banu, S; McCall, B J; Vlack, S; Carroll, H; Bennett, S; Davison, R; Francis, D

2018-02-01

Despite ongoing public health messages about the risks associated with bat contact, the number of potential exposures to Australian bat lyssavirus (ABLV) due to intentional handling by members of the general public in Queensland has remained high. We sought to better understand the reasons for intentional handling among these members of the public who reported their potential exposure to inform future public health messages. We interviewed adults who resided in a defined geographic area in South East Queensland and notified potential exposure to ABLV due to intentional handling of bats by telephone between 1 January 2012 and 31 December 2013. The participation rate was 54%. Adults who reported they had intentionally handled bats in South East Queensland indicated high levels of knowledge and perception of a moderately high risk associated with bats with overall low intentions to handle bats in the future. However, substantial proportions of people would attempt to handle bats again in some circumstances, particularly to protect their children or pets. Fifty-two percent indicated that they would handle a bat if a child was about to pick up or touch a live bat, and 49% would intervene if a pet was interacting with a bat. Future public health communications should recognize the situations in which even people with highrisk perceptions of bats will attempt to handle them. Public health messages currently focus on avoidance of bats in all circumstances and recommend calling in a trained vaccinated handler, but messaging directed at adults for circumstances where children or pets may be potentially exposed should provide safe immediate management options. © 2017 Blackwell Verlag GmbH.

Comparative social-technical analysis of arrangements for the reduction of energy poverty situations, and development of targeted intervention strategies. Final report

International Nuclear Information System (INIS)

Beslay, Christophe; Gournet, Romain; Zelem, Marie-Christine; Vidal, Marion; Huze, Marie-Helene; Cyssau, Rene; Ducrocq, Vincent; Menard, Francois; Cherel, Didier

2010-03-01

This study aimed at comparing different existing arrangements which have been implemented to reduce energy poverty. This comparison is based on an analysis of their actor configurations, and on their influence on the elaboration of implemented actions. It aimed at determining to which extent strategies and abilities could be complemented or are limited, and at identifying conditions of efficiency for implemented actions. This analysis also took four important issues into account: financial resources, housing energetic status and equipment, practices and representations of comfort and of energy, and arrangements for the struggle against energy poverty. Five arrangements, actions or programs have been compared: three implemented in three different French districts (Haute-Savoie, Gers and Tarn), one implemented in the Quebec province in Canada, and one implemented in the French Guyana. The comparison is made in terms of definitions and perceptions of energy poverty, of arrangement implementation, of household reception mode, of complexity of energy poverty situations, and of results of technical visits to households. The second part of the report makes some recommendations and proposals for the creation of a local intervention service for energy management

TRANSPORT/HANDLING REQUESTS

CERN Multimedia

Groupe ST/HM

2002-01-01

A new EDH document entitled 'Transport/Handling Request' will be in operation as of Monday, 11th February 2002, when the corresponding icon will be accessible from the EDH desktop, together with the application instructions. This EDH form will replace the paper-format transport/handling request form for all activities involving the transport of equipment and materials. However, the paper form will still be used for all vehicle-hire requests. The introduction of the EDH transport/handling request form is accompanied by the establishment of the following time limits for the various services concerned: 24 hours for the removal of office items, 48 hours for the transport of heavy items (of up to 6 metric tons and of standard road width), 5 working days for a crane operation, extra-heavy transport operation or complete removal, 5 working days for all transport operations relating to LHC installation. ST/HM Group, Logistics Section Tel: 72672 - 72202

Final Technical Report DOE/GO/13142-1

Energy Technology Data Exchange (ETDEWEB)

Patrick Mulvihill; Quang Nguyen

2010-09-15

This research adds to the understanding of the areas of residual starch and biomass conversion to alcohol, by providing data from pilot plant equipment of larger scale than the minimum required to give commercially scalable data. Instrumentation and control is in place to capture the information produced, for economic and technical evaluation. The impact of rheology, recycle streams, and residence time distributions on the technical and economic performance can be assessed. Various processes can be compared technically and economically because the pilot plants are readily modifiable. Several technologies for residual starch yield improvement have been identified, implemented, and patent applications filed. Various biomass-to-ethanol processes have been compared and one selected for technical optimization and commercialization. The technical and economic feasibility of the current simplified biomass conversion process is being confirmed by intensive pilot plant efforts as of this writing. Optimization of the feedstock handling and pretreatment is occurring to increase the alcohol yield above the minimum commercially viable level already demonstrated. Samples of biomass residue and reactor blowdown condensate are being collected to determine the technical and economic performance of the high-water-recycle waste treatment system being considered for the process. The project is of benefit to the public because it is advancing the efforts to achieve low-cost fermentable substrates for conversion to transportation fuels. This process combines the hydrolysis of agricultural residues with novel enzymes and organisms to convert the sugars released to transportation fuels. The process development is taking place at a scale allowing commercial development to proceed at a rapid pace.

Identifying and training non-technical skills of nuclear emergency response teams

International Nuclear Information System (INIS)

Crichton, M.T.; Flin, R.

2004-01-01

Training of the non-technical (social and cognitive) skills that are crucial to safe and effective management by teams in emergency situations is an issue that is receiving increasing emphasis in many organisations, particularly in the nuclear power industry. As teams play a major role in emergency response organisations (ERO), effective functioning and interactions within, between and across teams is crucial, particularly as the management of an emergency situation often requires that teams are extended by members from various other sections and strategic groups throughout the company, as well as members of external agencies. A series of interviews was recently conducted with members of a UK nuclear emergency response organisation to identify the non-technical skills required by team members that would be required for managing an emergency. Critical skills have been identified as decision making and situation assessment, as well as communication, teamwork, and stress management. A number of training strategies are discussed which can be tailored to the roles and responsibilities of the team members and the team leader, based on the roles within the team being defined as either Decision Maker, Evaluator, or Implementor, according to Nuclear Energy Institute (NEI) classifications. It is anticipated that enhanced learning of the necessary non-technical skills, through experience and directed practice, will improve the skills of members of emergency response teams

Identifying and training non-technical skills of nuclear emergency response teams

Energy Technology Data Exchange (ETDEWEB)

Crichton, M.T. E-mail: m.crichton@abdn.ac.uk; Flin, R

2004-08-01

Training of the non-technical (social and cognitive) skills that are crucial to safe and effective management by teams in emergency situations is an issue that is receiving increasing emphasis in many organisations, particularly in the nuclear power industry. As teams play a major role in emergency response organisations (ERO), effective functioning and interactions within, between and across teams is crucial, particularly as the management of an emergency situation often requires that teams are extended by members from various other sections and strategic groups throughout the company, as well as members of external agencies. A series of interviews was recently conducted with members of a UK nuclear emergency response organisation to identify the non-technical skills required by team members that would be required for managing an emergency. Critical skills have been identified as decision making and situation assessment, as well as communication, teamwork, and stress management. A number of training strategies are discussed which can be tailored to the roles and responsibilities of the team members and the team leader, based on the roles within the team being defined as either Decision Maker, Evaluator, or Implementor, according to Nuclear Energy Institute (NEI) classifications. It is anticipated that enhanced learning of the necessary non-technical skills, through experience and directed practice, will improve the skills of members of emergency response teams.

A Method to Design a Multi-Player Educational Scenario to Make Interdisciplinary Teams Experiment Risk Management Situation in a Digital Collaborative Learning Game: A Case of Study in Healthcare

Directory of Open Access Journals (Sweden)

Catherine Pons Lelardeux

2018-05-01

Full Text Available In recent years, there has been an increasing interest for collaborative training in risk management. One of the critical point is to create educational and entirely controlled training environments that support industrial companies (in aviation, healthcare, nuclear… or hospitals to train (future or not professionals. The aim is to improve their teamwork performance making them understand the importance applying or adjusting safety recommendations. In this article, we present a method to design multi-player educational scenario for risk management in a socio-technical and dynamic context. The socio-technical situations focused in this article involve non-technical skills such as teamwork, communication, leadership, decision-making and situation awareness. The method presented here has been used to design as well regular situations as well as critical situations in which deficiencies already exist or mistakes can be freely made and fixed by the team in a controlled digital environment.

Cask system design guidance for robotic handling

International Nuclear Information System (INIS)

Griesmeyer, J.M.; Drotning, W.D.; Morimoto, A.K.; Bennett, P.C.

1990-10-01

Remote automated cask handling has the potential to reduce both the occupational exposure and the time required to process a nuclear waste transport cask at a handling facility. The ongoing Advanced Handling Technologies Project (AHTP) at Sandia National Laboratories is described. AHTP was initiated to explore the use of advanced robotic systems to perform cask handling operations at handling facilities for radioactive waste, and to provide guidance to cask designers regarding the impact of robotic handling on cask design. The proof-of-concept robotic systems developed in AHTP are intended to extrapolate from currently available commercial systems to the systems that will be available by the time that a repository would be open for operation. The project investigates those cask handling operations that would be performed at a nuclear waste repository facility during cask receiving and handling. The ongoing AHTP indicates that design guidance, rather than design specification, is appropriate, since the requirements for robotic handling do not place severe restrictions on cask design but rather focus on attention to detail and design for limited dexterity. The cask system design features that facilitate robotic handling operations are discussed, and results obtained from AHTP design and operation experience are summarized. The application of these design considerations is illustrated by discussion of the robot systems and their operation on cask feature mock-ups used in the AHTP project. 11 refs., 11 figs

Resources and needs: assessment of the world water situation

Energy Technology Data Exchange (ETDEWEB)

1977-01-01

The global water situation is assessed. Movement and distribution of water in the hydrologic cycle is described. Methods of appraising surface water, precipitation, evapotranspiration, groundwater, and water quality are reviewed. The reliability of such appraisals depends greatly on the adequacy of national water observation networks. Global water supplies and quality of lakes, reservoirs, and groundwater are estimated. The effects of runoff, climate, and human activities on supplies are briefly discussed. The use and demand of water for domestic, industrial, agricultural, hydroelectric, transportation, and recreational needs are assessed. Methods of projecting water demand and quality are reviewed. Demand and supply relationships for various regions of the world are presented. Socioeconomic, financial, technical, administrative, legal, and environmental considerations of these relationships are examined. By using available technology and institutional devices, the world water situation can be improved. (1 diagram, 3 graphs, 8 tables)

Production management of window handles

Directory of Open Access Journals (Sweden)

Manuela Ingaldi

2014-12-01

Full Text Available In the chapter a company involved in the production of aluminum window and door handles was presented. The main customers of the company are primarily companies which produce PCV joinery and wholesalers supplying these companies. One chosen product from the research company - a single-arm pin-lift window handle - was described and its production process depicted technologically. The chapter also includes SWOT analysis conducted in the research company and the value stream of the single-arm pin-lift window handle.

Preparing, Loading and Shipping Irradiated Metals in Canisters Classified as Remote-Handled (RH) Low-Level Waste (LLW) From Oak Ridge National Laboratory (ORNL) to the Nevada Test Site (NTS)

International Nuclear Information System (INIS)

McClelland, B.C.; Moore, T.D.

2006-01-01

Irradiated metals, classified as remote-handled low-level waste generated at the Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee, were containerised in various sized canisters for long-term storage. The legacy waste canisters were placed in below-grade wells located at the 7827 Facility until a pathway for final disposal at the Nevada Test Site (NTS) could be identified and approved. Once the pathway was approved, WESKEM, LLC was selected by Bechtel Jacobs Company, LLC to prepare, load, and ship these canisters from ORNL to the NTS. This paper details some of the technical challenges encountered during the retrieval process and solutions implemented to ensure the waste was safely and efficiently over-packed and shipped for final disposal. The technical challenges detailed in this paper include: 1) how to best perform canister/lanyard pre-lift inspections since some canisters had not been moved in ∼10 years, so deterioration was a concern; 2) replacing or removing damaged canister lanyards; 3) correcting a mis-cut waste canister lanyard resulting in a shielded overpack lid not seating properly; 4) retrieving a stuck canister; and 5) developing a path forward after an overstrained lanyard failed causing a well shield plug to fall and come in contact with a waste canister. Several of these methods can serve as positive lessons learned for other projects encountering similar situations. (authors)

7 CFR 58.443 - Whey handling.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of whey. If outside, necessary precautions shall be taken to minimize flies, insects and development of...

Flexible path optimization for the Cask and Plug Remote Handling System in ITER

Energy Technology Data Exchange (ETDEWEB)

Vale, Alberto, E-mail: avale@ipfn.ist.utl.pt [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Fonte, Daniel; Valente, Filipe; Ferreira, João [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Ribeiro, Isabel [Laboratório de Robótica e Sistemas em Engenharia e Ciência, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa (Portugal); Gonzalez, Carmen [Fusion for Energy Agency (F4E), Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain)

2013-10-15

Highlights: ► Complementary approach for path optimization named free roaming that takes full advantage of the rhombic like kinematics of the Cask and Plug Remote Handling System (CPRHS). ► Possibility to find trajectories not possible in the past using the line guidance developed in a previous work, in particular when moving the Cask Transfer System (CTS) beneath the pallet or in rescue missions. ► Methodology that maximizes the common parts of different trajectories in the same level of ITER buildings. -- Abstract: The Cask and Plug Remote Handling System (CPRHS) provides the means for the remote transfer of in-vessel components and remote handling equipment between the Hot Cell Building and the Tokamak Building in ITER along pre-defined optimized trajectories. A first approach for CPRHS path optimization was previously proposed using line guidance as the navigation methodology to be adopted. This approach might not lead to feasible paths in new situations not considered during the previous work, as rescue operations. This paper addresses this problem by presenting a complementary approach for path optimization inspired in rigid body dynamics that takes full advantage of the rhombic like kinematics of the CPRHS. It also presents a methodology that maximizes the common parts of different trajectories in the same level of ITER buildings. The results gathered from 500 optimized trajectories are summarized. Conclusions and open issues are presented and discussed.

Handling and storage of conditioned high-level wastes

International Nuclear Information System (INIS)

Heafield, W.

1984-01-01

This paper deals with certain aspects of the management of one of the most important radioactive wastes arising from the nuclear fuel cycle, i.e. the handling and storage of conditioned high-level wastes. The paper is based on an IAEA report of the same title published during 1983 in the Technical Reports Series. The paper provides illustrative background material on the characteristics of high-level wastes and, qualitatively, their requirements for conditioning. The principles important in the storage of high-level wastes are reviewed in conjunction with the radiological and socio-political considerations involved. Four fundamentally different storage concepts are described with reference to published information and the safety aspects of particular storage concepts are discussed. Finally, overall conclusions are presented which confirm the availability of technology for constructing and operating conditioned high-level waste storage facilities for periods of at least several decades. (author)

Evaluation of structure integrity of the lifting handle of CRB

Energy Technology Data Exchange (ETDEWEB)

Wu, S.-Y. [Radiation Protection Association, Taiwan (China); Lin, S.-R. [Radiation Protection Association, Taiwan (China)], E-mail: srlin@iner.gov.tw; Kang, L.-C. [Institute of Nuclear Energy Research, Taiwan (China); Chang, Han-Jou [Department of Nuclear Safety, TPC, Taiwan (China)

2008-09-15

Since visual inspection was applied to inspect the control rod blades (CRBs) of nuclear power plants in Taiwan, indications have been found in areas such as roller-pin hole, sheath and tie-rod of CRB. Many preliminary safety analyses with conservative assumptions have been conducted to endorse the continuing operation of the units. The objective of this study is to evaluate the structural integrity of those CRBs during lifting operation. Detailed finite element models of the lifting handle of the CRB are built with emphasis on the postulated crack near the roller-pin hole. Both the D-215 type CRB and the Marathon type CRB are evaluated. It is concluded that the structural integrity is guaranteed even under the worst postulated situation.

Study on new-type fuel-related assembly handling tools for PWR NPP

International Nuclear Information System (INIS)

Fan Xiumei

2013-01-01

This article describes the design and study on a set of new-type fuel-related assembly snatching tools used for PWR NPP. The purpose is mainly to enhance the tool safety, reliability and convenientness by improvement of the mechanism and structure of the tool for snatching preciseness and avoiding from falling and abrasion of fuel-related assemblies for any condition. The new-type fuel-related assembly handling tools are compared with similar equipment in worldwide in terms of function, main technical characteristic, and safety and protection, some of them are better than the similar equipment in that they have reliable loading and unloading and conveying capabilities. (author)

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

Science.gov (United States)

Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

2017-07-01

Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Development of commercial robots for radwaste handling

International Nuclear Information System (INIS)

Colborn, K.A.

1988-01-01

The cost and dose burden associated with low level radwaste handling activities is a matter of increasing concern to the commercial nuclear power industry. This concern is evidenced by the fact that many utilities have begun to revaluate waste generation, handling, and disposal activities at their plants in an effort to improve their overall radwaste handling operations. This paper reports on the project Robots for Radwaste Handling, to identify the potential of robots to improve radwaste handling operations. The project has focussed on the potential of remote or automated technology to improve well defined, recognizable radwaste operations. The project focussed on repetitive, low skill level radwaste handling and decontamination tasks which involve significant radiation exposure

Technical area status report for chemical/physical treatment

International Nuclear Information System (INIS)

Brown, C.H. Jr.; Schwinkendorf, W.E.

1993-08-01

The Office of Environmental Restoration and Waste Management (EM) was established by the Department of Energy (DOE) to direct and coordinate waste management and site remediation programs and activities throughout the DOE Complex. The Mixed Waste Integrated Program (MWIP) was created by the DOE Office of Technology Development (OTD) to develop, deploy, and complete appropriate technologies for the treatment of an DOE low-level mixed waste (LLMW). The MWIP mission includes development of strategies related to enhanced waste form production, improvements to and testing of the EM-30 baseline flowsheet for mixed waste treatment, programmatic oversight for ongoing technical projects, and specific technical tasks related to the site specific Federal Facilities Compliance Agreement (FFCA). The MWIP has established five Technical Support Groups (TSGs) based on primary functional areas of the Mixed Waste Treatment Plant) identified by EM-30. These TSGs are: (1) Front-End Waste Handling, (2) Chemical/Physical Treatment, (3) Waste Destruction and Stabilization, (4) Second-stage Destruction and Offgas Treatment, and (5) Final Waste Forms. The focus of this document is the Chemical/Physical Treatment System (CPTS). The CPTS performs the required pretreatment and/or separations on the waste streams passing through the system for discharge to the environment or efficient downstream processing. Downstream processing can include all system components except Front-End Waste Handling. The primary separations to be considered by the CPTS are: (1) removal of suspended and dissolved solids from aqueous and liquid organic streams, (2) separation of water from organic liquids, (3) treatment of wet and dry solids, including separation into constituents as required, for subsequent thermal treatment and final form processing, (4) mercury removal and control, and (5) decontamination of equipment and waste classified as debris

Preoperational checkout of the remote-handled transuranic waste handling at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

1987-09-01

This plan describes the preoperational checkout for handling Remote-Handled Transuranic (RH-TRU) Wastes from their receipt at the Waste Isolation Pilot Plant (WIPP) to their emplacement underground. This plan identifies the handling operations to be performed, personnel groups responsible for executing these operations, and required equipment items. In addition, this plan describes the quality assurance that will be exercised throughout the checkout, and finally, it establishes criteria by which to measure the success of the checkout. 7 refs., 5 figs

Preference Handling for Artificial Intelligence

OpenAIRE

Goldsmith, Judy; University of Kentucky; Junker, Ulrich; ILOG

2009-01-01

This article explains the benefits of preferences for AI systems and draws a picture of current AI research on preference handling. It thus provides an introduction to the topics covered by this special issue on preference handling.

Religious Serpent Handling and Community Relations.

Science.gov (United States)

Williamson, W Paul; Hood, Ralph W

2015-01-01

Christian serpent handling sects of Appalachia comprise a community that has long been mischaracterized and marginalized by the larger communities surrounding them. To explore this dynamic, this article traces the emergence of serpent handling in Appalachia and the emergence of anti-serpent-handling state laws, which eventually failed to curb the practice, as local communities gave serpent handling groups support. We present two studies to consider for improving community relations with serpent handling sects. In study 1, we present data relating the incidence of reported serpent-bite deaths with the rise of anti-serpent-handling laws and their eventual abatement, based on increasing acceptance of serpent handlers by the larger community. Study 2 presents interview data on serpent bites and death that provide explanations for these events from the cultural and religious perspective. We conclude that first-hand knowledge about serpent handlers, and other marginalized groups, helps to lessen suspicion and allows them to be seen as not much different, which are tendencies that are important for promoting inter-community harmony.

Validation of the plan of handling of hospital accustomed to waste of the Costa Rica Box of the Public Health

International Nuclear Information System (INIS)

Salazar Monge, F. J.

1999-01-01

The handling that is given at the moment to the hospital solid waste in Costa Rica is considered inadequate, due to the lack of the personnel's of cleaning training, segregation, vehicles of transport and recipients, signaling, team of personal protection, schedule and gathering route and recycle. This situation represents a serious danger for the population's health and the since environment is exposed infectious agents toxic substances and even radioactive products that are generated in the residuals of the centers of health. In this work they intend improvements to the system of handling of solid waste of the hospital Calderon Guardia, and you evaluates each one of the points mentioned previously. A revision was made about the properties, the quality and the quantity of the produced solid waste and an I diagnose of the current situation in this center of health. The proposed improvements are based on the regional program of hospital solid waste, agreement ALA91/33 (this it was elaborated in 1997 by a cooperation initiative between the European Union and the Governments from Costa Rica, El Salvador, Guatemala, Honduras, Nicaragua and Panama) and the Norms for the Handling of dangerous Solid Waste in Establishments of Health (elaborated by the Costa Rican Box of the Public Health) their advantages and disadvantages are also exposed and he/she is carried out a comparative analysis among the handling plan proposed in these documents and the one that is used at the moment in the Calderon Guardia hospital. Some of the detected problems are: it lacks of team of personal protection, the appropriate recipients are not used, storage of waste inside the hospital, the vehicles used in the internal transport are not appropriate, bad organization of the storing center, among others [es

Safe handling of tritium

International Nuclear Information System (INIS)

1991-01-01

The main objective of this publication is to provide practical guidance and recommendations on operational radiation protection aspects related to the safe handling of tritium in laboratories, industrial-scale nuclear facilities such as heavy-water reactors, tritium removal plants and fission fuel reprocessing plants, and facilities for manufacturing commercial tritium-containing devices and radiochemicals. The requirements of nuclear fusion reactors are not addressed specifically, since there is as yet no tritium handling experience with them. However, much of the material covered is expected to be relevant to them as well. Annex III briefly addresses problems in the comparatively small-scale use of tritium at universities, medical research centres and similar establishments. However, the main subject of this publication is the handling of larger quantities of tritium. Operational aspects include designing for tritium safety, safe handling practice, the selection of tritium-compatible materials and equipment, exposure assessment, monitoring, contamination control and the design and use of personal protective equipment. This publication does not address the technologies involved in tritium control and cleanup of effluents, tritium removal, or immobilization and disposal of tritium wastes, nor does it address the environmental behaviour of tritium. Refs, figs and tabs

Interpersonal Privacy Management in Distributed Collaboration: Situational Characteristics and Interpretive Influences

Science.gov (United States)

Patil, Sameer; Kobsa, Alfred; John, Ajita; Brotman, Lynne S.; Seligmann, Doree

To understand how collaborators reconcile the often conflicting needs of awareness and privacy, we studied a large software development project in a multinational corporation involving individuals at sites in the U.S. and India. We present a theoretical framework describing privacy management practices and their determinants that emerged from field visits, interviews, and questionnaire responses. The framework identifies five relevant situational characteristics: issue(s) under consideration, physical place(s) involved in interaction(s), temporal aspects, affordances and limitations presented by technology, and nature of relationships among parties. Each actor, in turn, interprets the situation based on several simultaneous influences: self, team, work site, organization, and cultural environment. This interpretation guides privacy management action(s). Past actions form a feedback loop refining and/or reinforcing the interpretive influences. The framework suggests that effective support for privacy management will require that designers follow a socio-technical approach incorporating a wider scope of situational and interpretive differences.

How Retailers Handle Complaint Management

DEFF Research Database (Denmark)

Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy

2009-01-01

This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained as to the......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived...

Linking Ethics and Language in the Technical Communication Classroom.

Science.gov (United States)

Sims, Brenda R.

1993-01-01

Discusses research on ethics and technical communication and examines specific methods that writers may use to manipulate language and to present information unethically. Suggests questions designed to teach students how to analyze situations that may involve such manipulation and misrepresentation. Concludes with two case studies illustrating…

7 CFR 926.9 - Handle.

Science.gov (United States)

2010-01-01

... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle. Handle...

IAEA technical co-operation with least developed Member States. Special evaluation

International Nuclear Information System (INIS)

1993-01-01

The main purposes of this evaluation were to: Review the overall situation with regard to IAEA technical co-operation with least developed Member States, including specific conditions in nuclear-related activities prevailing in these countries, approaches and practices used by the IAEA in providing assistance to LDCs, and the main results of the co-operation in question. Identify any adjustments to technical co-operation with LDC Member States that may strengthen this activity

Engineering thinking in emergency situations: A new nuclear safety concept.

Science.gov (United States)

Guarnieri, Franck; Travadel, Sébastien

2014-11-01

The lessons learned from the Fukushima Daiichi accident have focused on preventive measures designed to protect nuclear reactors, and crisis management plans. Although there is still no end in sight to the accident that occurred on March 11, 2011, how engineers have handled the aftermath offers new insight into the capacity of organizations to adapt in situations that far exceed the scope of safety standards based on probabilistic risk assessment and on the comprehensive identification of disaster scenarios. Ongoing crises in which conventional resources are lacking, but societal expectations are high, call for "engineering thinking in emergency situations." This is a new concept that emphasizes adaptability and resilience within organizations-such as the ability to create temporary new organizational structures; to quickly switch from a normal state to an innovative mode; and to integrate a social dimension into engineering activities. In the future, nuclear safety oversight authorities should assess the ability of plant operators to create and implement effective engineering strategies on the fly, and should require that operators demonstrate the capability for resilience in the aftermath of an accident.

Laser welding and ablation cutting process for hydraulic connections by remote handling in the ITER diagnostic port plug

International Nuclear Information System (INIS)

Pak, S.; Kim, Y.; Park, K.Y.; Lee, K.D.; Cheon, M.S.; Lee, H.G.

2010-01-01

To assess hydraulic connections between subcomponents of the International Thermonuclear Experimental Reactor (ITER) diagnostic port plug, we investigated the laser welding and ablation cutting process, which can be applied to remote handling maintenance. In this study, laser ablation cutting, which vaporizes a small amount of solid material directly into gas by focusing a laser beam of high-density energy, is adopted in order to overcome the limitation of the normal laser cutting technology that the head should be placed as close to the work piece as possible to blow out melt metal at a distance. Complete cutting of a work piece is obtained by repetitive multi-passes of the laser beam. The welding and cutting process were tested on the sample work pieces and finally on a prototype of a hydraulic connection module for remote handling. The results showed that this process can be a promising candidate for hydraulic connections by remote handling. Furthermore the design of the hydraulic connection module has been updated to resolve some technical difficulties that were found during the test.

Laser welding and ablation cutting process for hydraulic connections by remote handling in the ITER diagnostic port plug

Energy Technology Data Exchange (ETDEWEB)

Pak, S. [National Fusion Research Institute, 52 Eoeun-dong, Yuseong-gu, Daejeon (Korea, Republic of)], E-mail: paksunil@nfri.re.kr; Kim, Y.; Park, K.Y.; Lee, K.D. [Institute for Advanced Engineering, 633-2, Goan-ri, Baegam-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do (Korea, Republic of); Cheon, M.S.; Lee, H.G. [National Fusion Research Institute, 52 Eoeun-dong, Yuseong-gu, Daejeon (Korea, Republic of)

2010-04-15

To assess hydraulic connections between subcomponents of the International Thermonuclear Experimental Reactor (ITER) diagnostic port plug, we investigated the laser welding and ablation cutting process, which can be applied to remote handling maintenance. In this study, laser ablation cutting, which vaporizes a small amount of solid material directly into gas by focusing a laser beam of high-density energy, is adopted in order to overcome the limitation of the normal laser cutting technology that the head should be placed as close to the work piece as possible to blow out melt metal at a distance. Complete cutting of a work piece is obtained by repetitive multi-passes of the laser beam. The welding and cutting process were tested on the sample work pieces and finally on a prototype of a hydraulic connection module for remote handling. The results showed that this process can be a promising candidate for hydraulic connections by remote handling. Furthermore the design of the hydraulic connection module has been updated to resolve some technical difficulties that were found during the test.

Credibility of experts and institutions in emergency situations

International Nuclear Information System (INIS)

Renn, O.; Kastenholz, H.G.

1997-01-01

This article deals with the most important results of communication and psychological studies on credibility and trust in emergency situations. The central insight in this paper has been that communication about the different elements of credibility needs to start before any emergency in order to build trust among the various constituents. In addition, emergency handling institutions need to reflect the experiences they have made during an emergency and involve the public in a social learning process to improve the existing emergency plans. Credibility of institutions relies on the congruence between the expectations of the public with respect to the demanded performance and the preception of the actual performance. Any institution needs to adjust its communication about public expectations as well as institute sufficient control and monitoring to improve actual performance. (orig.) [de

Six stirrup handled Moche ceramic vessels from pre-Colombian Peru: a technical study applying PIXE spectrometry

Science.gov (United States)

Swann, C. P.; Caspi, Sara; Carlson, Janice

1999-04-01

Much has been said recently concerning the Moche culture of Peru (100 B.C. to 700 A.D. ) which preceded the more widely known Inca society. Since there was no written language, what is known about the Moche people has been through the artifacts produced, their design and craftsmanship. This study concerns the PIXE analysis of the matrix and the red and white surface patterns of six stirrup handled earthenware vessels. The results suggest different techniques were applied for producing the coloring and surface designs and that a common source of clays was not used in the construction.

Six stirrup handled Moche ceramic vessels from pre-Colombian Peru: a technical study applying PIXE spectrometry

International Nuclear Information System (INIS)

Swann, C.P.; Caspi, Sara; Carlson, Janice

1999-01-01

Much has been said recently concerning the Moche culture of Peru (100 B.C. to 700 A.D. ) which preceded the more widely known Inca society. Since there was no written language, what is known about the Moche people has been through the artifacts produced, their design and craftsmanship. This study concerns the PIXE analysis of the matrix and the red and white surface patterns of six stirrup handled earthenware vessels. The results suggest different techniques were applied for producing the coloring and surface designs and that a common source of clays was not used in the construction

Six stirrup handled Moche ceramic vessels from pre-Colombian Peru: a technical study applying PIXE spectrometry

Energy Technology Data Exchange (ETDEWEB)

Swann, C.P. E-mail: swann@bartol.udel.edu; Caspi, Sara; Carlson, Janice

1999-04-02

Much has been said recently concerning the Moche culture of Peru (100 B.C. to 700 A.D. ) which preceded the more widely known Inca society. Since there was no written language, what is known about the Moche people has been through the artifacts produced, their design and craftsmanship. This study concerns the PIXE analysis of the matrix and the red and white surface patterns of six stirrup handled earthenware vessels. The results suggest different techniques were applied for producing the coloring and surface designs and that a common source of clays was not used in the construction.

Remote handling at LAMPF

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1983-01-01

Experimental area A at the Clinton P. Anderson Meson Physics Facility (LAMPF) encompasses a large area. Presently there are four experimental target cells along the main proton beam line that have become highly radioactive, thus dictating that all maintenance be performed remotely. The Monitor remote handling system was developed to perform in situ maintenance at any location within area A. Due to the complexity of experimental systems and confined space, conventional remote handling methods based upon hot cell and/or hot bay concepts are not workable. Contrary to conventional remote handling which require special tooling for each specifically planned operation, the Monitor concept is aimed at providing a totally flexible system capable of remotely performing general mechanical and electrical maintenance operations using standard tools. The Monitor system is described

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy

DEFF Research Database (Denmark)

Gjeraa, Kirsten; Mundt, Anna S.; Spanager, Lene

2017-01-01

Background Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived...... with complementary and overlapping scopes of practice between surgical and anesthesia subteams. Conclusions This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important...... by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. Methods This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data...

MRI of meniscal bucket-handle tears

Energy Technology Data Exchange (ETDEWEB)

Magee, T.H.; Hinson, G.W. [Menorah Medical Center, Overland Park, KS (United States). Dept. of Radiology

1998-09-01

A meniscal bucket-handle tear is a tear with an attached fragment displaced from the meniscus of the knee joint. Low sensitivity of MRI for detection of bucket-handle tears (64% as compared with arthroscopy) has been reported previously. We report increased sensitivity for detecting bucket-handle tears with the use of coronal short tau inversion recovery (STIR) images. Results. By using four criteria for diagnosis of meniscal bucket-handle tears, our overall sensitivity compared with arthroscopy was 93% (28 of 30 meniscal bucket-handle tears seen at arthroscopy were detected by MRI). The meniscal fragment was well visualized in all 28 cases on coronal STIR images. The double posterior cruciate ligament sign was seen in 8 of 30 cases, the flipped meniscus was seen in 10 of 30 cases and a fragment in the intercondylar notch was seen in 18 of 30 cases. (orig.)

Sophisticated fuel handling system evolved

International Nuclear Information System (INIS)

Ross, D.A.

1988-01-01

The control systems at Sellafield fuel handling plant are described. The requirements called for built-in diagnostic features as well as the ability to handle a large sequencing application. Speed was also important; responses better than 50ms were required. The control systems are used to automate operations within each of the three main process caves - two Magnox fuel decanners and an advanced gas-cooled reactor fuel dismantler. The fuel route within the fuel handling plant is illustrated and described. ASPIC (Automated Sequence Package for Industrial Control) which was developed as a controller for the plant processes is described. (U.K.)

Content and technical evaluation of Type III Iranian medical universities\\' websites

Directory of Open Access Journals (Sweden)

Khadejeh Shabankareh

2016-05-01

Full Text Available Background: Besides the role that universities websites have in reflection of universities’ educational and research activities, they have also significant importance in promotion of universities’ national and international ranking in webometrics ranking of world universities and also in webometric ranking of Islamic world Science Citation and subsequently obtaining national and international credibility and gaining student and funding. So, continuous evaluation of universities websites in different aspects, especially based on considering index of these ranking systems, is important. Therefore, present study aimed to review the situation of Type 3 Iranian medical universities’ websites based on content and technical features effecting on promotion of webometric rank. Materials and Methods : Present study is a survey with descriptive approach which descriptive the present situation of Type 3 Iranian medical universities’ websites. Data were collected using a researcher-made checklist which was consisted of two parts including content criteria effecting on webometric ranking (50 criteria and technical criteria of search engines optimization (52 criteria. Content evaluation of websites was done by researcher direct referring and observing. In order to evaluation of these websites, based on technical criteria of search engines optimization, automatic tools about website evaluation were used. Data were analyzed by SPSS20. Results: The finding of this study showed that, Gonabad, Bushehr & Shahrekord universities of medical sciences have the most accommodation with the research checklist.  Bam, Dezful & Jiroft universities of medical sciences have the least accommodation. According to research findings less than 50 percent of the research community, reached more than 50 percent of the criteria in checklist. Conclusion: Evaluation of studied websites indicated that whole websites are far from ideal situation. So type 3 medical universities

Savannah River Site production reactor technical specifications. K Production Reactor

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

These technical specifications are explicit restrictions on the operation of the Savannah River Site K Production Reactor. They are designed to preserve the validity of the plant safety analysis by ensuring that the plant is operated within the required conditions bounded by the analysis, and with the operable equipment that is assumed to mitigate the consequences of an accident. Technical specifications preserve the primary success path relied upon to detect and respond to accidents. This report describes requirements on thermal-hydraulic limits; limiting conditions for operation and surveillance for the reactor, power distribution control, instrumentation, process water system, emergency cooling and emergency shutdown systems, confinement systems, plant systems, electrical systems, components handling, and special test exceptions; design features; and administrative controls.

Proposal for outline of training and evaluation method for non-technical skills

International Nuclear Information System (INIS)

Nagasaka, Akihiko; Shibue, Hisao

2015-01-01

The purpose of this study is to systematize measures for improvement of emergency response capability focused on non-technical skills. As the results of investigation of some emergency training in nuclear power plant and referring to CRM training, following two issues were picked up. 1) Lack of practical training method for improvement of non-technical skills. 2) Lack of evaluation method of non-technical skills. Then, based on these 7 non-technical skills 'situational awareness' 'decision making' 'communication' 'teamworking' 'leadership' 'managing stress' 'coping with fatigue' are promotion factors to improve emergency response capability, we propose practical training method for each non-technical skill. Also we give example of behavioral markers as evaluation factor, and indicate approaches to introduce the evaluation method of non-technical skills. (author)

Laws on technical safety. Vol. 1

International Nuclear Information System (INIS)

Eberstein, H.H.; Strecker, A.

1981-01-01

Loose-leaf collection containing the full text of 1) Law on the safety of technical equipment and materials, with administrative regulations and ordinances; 2) Section 24 of the Trading and Industrial Code, and ordinance on the use of compressed air; 3) Ordinance on the handling of hazardous materials; 4) Working Site Ordinance; 5) Law concerning works doctors, safety engineers and other personnel responsible for occupational safety; 6) Law for the protection of minors in working conditions; 7) Atomic Energy Law; 8) Radiation Protection Ordinance; 9) X-ray Ordinance; 10) Law on hazardous chemical substances; 11) Law on the carriage of dangerous goods. (HP) [de

The natural angle between the hand and handle and the effect of handle orientation on wrist radial/ulnar deviation during maximal push exertions.

Science.gov (United States)

Young, Justin G; Lin, Jia-Hua; Chang, Chien-Chi; McGorry, Raymond W

2013-01-01

The purpose of this experiment was to quantify the natural angle between the hand and a handle, and to investigate three design factors: handle rotation, handle tilt and between-handle width on the natural angle as well as resultant wrist radial/ulnar deviation ('RUD') for pushing tasks. Photographs taken of the right upper limb of 31 participants (14 women and 17 men) performing maximal seated push exertions on different handles were analysed. Natural hand/handle angle and RUD were assessed. It was found that all of the three design factors significantly affected natural handle angle and wrist RUD, but participant gender did not. The natural angle between the hand and the cylindrical handle was 65 ± 7°. Wrist deviation was reduced for handles that were rotated 0° (horizontal) and at the narrow width (31 cm). Handles that were tilted forward 15° reduced radial deviation consistently (12-13°) across handle conditions. Manual materials handling (MMH) tasks involving pushing have been related to increased risk of musculoskeletal injury. This study shows that handle orientation influences hand and wrist posture during pushing, and suggests that the design of push handles on carts and other MMH aids can be improved by adjusting their orientation to fit the natural interface between the hand and handle.

9 CFR 3.118 - Handling.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.118 Section 3.118 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine...

Safety measuring for sodium handling

Energy Technology Data Exchange (ETDEWEB)

Jeong, Ji Young; Jeong, K C; Kim, T J; Kim, B H; Choi, J H

2001-09-01

This is the report for the safety measures of sodium handling. These contents are prerequisites for the development of sodium technology and thus the workers participate in sodium handling and experiments have to know them perfectly. As an appendix, the relating parts of the laws are presented.

KBS Annual Report 1982. Summaries of technical reports issued during 1982

International Nuclear Information System (INIS)

1983-07-01

The purpose of the KBS Annual Report is to inform interested organizations and individuals of the research and development work perfomed by the division KBS within the Swedish Nuclear Fuel Supply Co. (SKBF) on the handling, treatment and final storage of nuclear wastes in Sweden. In the Annual Report for 1982 the summaries of 27 technical reports and other publications issued during the year are listed. (K.A.E.)

A Perspective on Remote Handling Operations and Human Machine Interface for Remote Handling in Fusion

International Nuclear Information System (INIS)

Haist, B.; Hamilton, D.; Sanders, St.

2006-01-01

A large-scale fusion device presents many challenges to the remote handling operations team. This paper is based on unique operational experience at JET and gives a perspective on remote handling task development, logistics and resource management, as well as command, control and human-machine interface systems. Remote operations require an accurate perception of a dynamic environment, ideally providing the operators with the same unrestricted knowledge of the task scene as would be available if they were actually at the remote work location. Traditional camera based systems suffer from a limited number of viewpoints and also degrade quickly when exposed to high radiation. Virtual Reality and Augmented Reality software offer great assistance. The remote handling system required to maintain a tokamak requires a large number of different and complex pieces of equipment coordinating to perform a large array of tasks. The demands on the operator's skill in performing the tasks can escalate to a point where the efficiency and safety of operations are compromised. An operations guidance system designed to facilitate the planning, development, validation and execution of remote handling procedures is essential. Automatic planning of motion trajectories of remote handling equipment and the remote transfer of heavy loads will be routine and need to be reliable. This paper discusses the solutions developed at JET in these areas and also the trends in management and presentation of operational data as well as command, control and HMI technology development offering the potential to greatly assist remote handling in future fusion machines. (author)

A mixed methods investigation into the use of non-technical skills by community and hospital pharmacists.

Science.gov (United States)

Irwin, A; Weidmann, A E

2015-01-01

Non-technical skills refer to the social and cognitive factors that may influence efficient and safe job performance. Non-technical skills are an important element of patient safety in a variety of health care disciplines, including surgery, anesthesia and nursing. However, the use of non-technical skills in pharmacy practice has not yet been fully assessed. To examine attitudes toward, and use of, non-technical skills by pharmacy personnel. A mixed methods approach was used: An attitude survey explored pharmacy personnel attitudes towards non-technical skills and inter-professional collaboration, with community and hospital pharmacy staff (n = 62). Qualitative interviews were then conducted using the critical incident technique, with community pharmacists (n = 11). The survey results demonstrated differences in the opinions of community and hospital pharmacists on three non-technical skill constructs: team structure, mutual support, and situation monitoring, with community pharmacists reporting significantly more positive attitudes about all three constructs. Both groups reported low levels of collaboration with primary care physicians. The interviews identified five non-technical skills as key elements of successful pharmacist performance from the interview transcripts: teamwork; leadership; task management; situation awareness; decision-making. The survey and interviews identified the non-technical skills that are important to pharmacists. This represents the first step towards the development of a behavioral rating system for training purposes that could potentially improve the non-technical skills of pharmacists and enhance patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

Gas Test Loop Functional and Technical Requirements

International Nuclear Information System (INIS)

Glen R. Longhurst; Soli T. Khericha; James L. Jones

2004-01-01

This document defines the technical and functional requirements for a gas test loop (GTL) to be constructed for the purpose of providing a high intensity fast-flux irradiation environment for developers of advanced concept nuclear reactors. This capability is needed to meet fuels and materials testing requirements of the designers of Generation IV (GEN IV) reactors and other programs within the purview of the Advanced Fuel Cycle Initiative (AFCI). Space nuclear power development programs may also benefit by the services the GTL will offer. The overall GTL technical objective is to provide developers with the means for investigating and qualifying fuels and materials needed for advanced reactor concepts. The testing environment includes a fast-flux neutron spectrum of sufficient intensity to perform accelerated irradiation testing. Appropriate irradiation temperature, gaseous environment, test volume, diagnostics, and access and handling features are also needed. This document serves to identify those requirements as well as generic requirements applicable to any system of this kind

Gas Test Loop Functional and Technical Requirements

Energy Technology Data Exchange (ETDEWEB)

Glen R. Longhurst; Soli T. Khericha; James L. Jones

2004-09-01

This document defines the technical and functional requirements for a gas test loop (GTL) to be constructed for the purpose of providing a high intensity fast-flux irradiation environment for developers of advanced concept nuclear reactors. This capability is needed to meet fuels and materials testing requirements of the designers of Generation IV (GEN IV) reactors and other programs within the purview of the Advanced Fuel Cycle Initiative (AFCI). Space nuclear power development programs may also benefit by the services the GTL will offer. The overall GTL technical objective is to provide developers with the means for investigating and qualifying fuels and materials needed for advanced reactor concepts. The testing environment includes a fast-flux neutron spectrum of sufficient intensity to perform accelerated irradiation testing. Appropriate irradiation temperature, gaseous environment, test volume, diagnostics, and access and handling features are also needed. This document serves to identify those requirements as well as generic requirements applicable to any system of this kind.

Versatile cable handling mechanisms for remote operator control

Energy Technology Data Exchange (ETDEWEB)

Collie, A.A.; White, T.S.; Christopher, M.D.; Hewer, N.D. [Portech Ltd., Portsmouth (United Kingdom)

1996-12-31

This paper describes a system of cable management for keeping the umbilical cables of remote operating vehicles and manipulators tidy and contained without direct intervention by operators. Two distinct types of winding mechanism have been designed. One mechanism is a fixed reel type where the cable is wound onto the reel by a rotating bail arm. The other mechanism consists of a pair of curved belts held against each other between which cable is passed. The complete system includes tension measuring and slack loop take-up devices. The whole system is controlled by a servo system in conjunction with a PC based visual graphic environment which allows a variety of mechanisms to be built up into a system able to handle up to four umbilical cables simultaneously. The control system provides additional tension sensors and cable odometers connected to the control system so that the operator has immediate perception of all the cable parameters, and by defining rules, can set up a variety of alarm situations. (Author).

Versatile cable handling mechanisms for remote operator control

International Nuclear Information System (INIS)

Collie, A.A.; White, T.S.; Christopher, M.D.; Hewer, N.D.

1996-01-01

This paper describes a system of cable management for keeping the umbilical cables of remote operating vehicles and manipulators tidy and contained without direct intervention by operators. Two distinct types of winding mechanism have been designed. One mechanism is a fixed reel type where the cable is wound onto the reel by a rotating bail arm. The other mechanism consists of a pair of curved belts held against each other between which cable is passed. The complete system includes tension measuring and slack loop take-up devices. The whole system is controlled by a servo system in conjunction with a PC based visual graphic environment which allows a variety of mechanisms to be built up into a system able to handle up to four umbilical cables simultaneously. The control system provides additional tension sensors and cable odometers connected to the control system so that the operator has immediate perception of all the cable parameters, and by defining rules, can set up a variety of alarm situations. (Author)

Versatile cable handling mechanisms for remote operator control

International Nuclear Information System (INIS)

Collie, A.A.; White, T.S.; Christopher, M.D.; Hewer, N.D.

1996-01-01

This paper describes a system of cable management for keeping the umbilical cables of remote operating vehicles and manipulators tidy and contained without direct intervention by operators. Two distinct types of winding mechanism have been designed. One mechanism is a fixed reel type where the cable is wound onto the reel by a rotating bail arm. The other mechanism consists of a pair of curved belts held against each other, between which cable is passed. The complete system includes tension measuring and slack loop take-up devices. The whole system is controlled by a servo system in conjunction with a PC based visual graphic environment which allows a variety of mechanisms to be built up into a system able to handle up to four umbilical cables simultaneously. The control system provides additional tension sensors and cable odometers connected to the control system so that the operator has immediate perception of all the cable parameters, and by defining rules, can set up a variety of alarm situations. (UK)

Handling and treatment of radioactive aqueous wastes

International Nuclear Information System (INIS)

1992-07-01

This report aims to provide essential guidance to developing Member States without a nuclear power programme regarding selection, design and operation of cost effective treatment processes for radioactive aqueous liquids arising as effluents from small research institutions, hospitals and industries. The restricted quantities and low activity associated with the relevant wastes will generally permit contact-handling and avoid the need for shielding requirements. The selection of liquid waste treatment involves: Characterization of arising with the possibility of segregation; Discharge requirements for decontaminated liquors, both radioactive and non-radioactive; Available technologies and costs; Conditioning of the concentrates resulting from the treatment; Storage and disposal of the conditioned concentrates. The report will serve as a technical manual providing reference material and direct step-by-step know-how to staff in radioisotope user establishments and research centres in the developing Member States without nuclear power generation. Therefore, emphasis is limited to the simpler treatment facilities, which will be included with only the robust, well-established waste management processes carefully chosen as appropriate to developing countries. 20 refs, 12 figs, 7 tabs

Present situation and future prospects for French nuclear power plants

International Nuclear Information System (INIS)

Carle, R.

1984-01-01

The author depicts the present situation and future of the French nuclear power programme which has now become a major industrial reality after successful acceptance of a twofold challenge: the technical problem and that of training the personnel responsible for operating the power stations. The large number of nuclear plants now in operation and planned for the next few years makes electricity generated from nuclear power a ''new industrial reality'', which we must still learn to utilize to the best effect [fr

Laboratory and project based learning in the compulsory course Biological Chemistry enhancing collaboration and technical communication between groups

DEFF Research Database (Denmark)

Agersø, Yvonne; Bysted, Anette; Jensen, Lars Bogø

2011-01-01

The aim of this paper was to describe how changes of laboratory training and project based learning were implemented in order to train the students in making a study design, basic laboratory skills, handling of data, technical communication, collaboration and presentation....

Air-handling energy efficiency and design practices

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Lars J.

1993-12-31

With good design practices and life-cycle cost optimization, specific fan power for individual fans will be between 0.5 and 1kW/m{sup 3}/s. Data from nearly 1000 audited fans in Sweden show that the average measured SFPI weighted by drawn motor power is 1.5 kW/m{sup 3}/s and the situation appears to be similar in other countries. Contract forms used by Swedish builders, and consultants` design practices are analyzed here to search for an explanation to the low performance of installed systems. Identified as two major barriers to efficient system design are the lack of performance specifications when procuring systems and the incentive structure in the building sector. As a consequence, duct design methods, rules of thumb, and vendor recommendations are not leading to system optimization. The broad minima in life cycle costs over a range of air-handling unit sizes show that potential economic welfare losses from efficiency standards are likely to be smaller than the losses that result from today`s design practices. 73 refs, 4 figs, 3 tabs

Air-handling energy efficiency and design practices

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Lars J

1994-12-31

With good design practices and life-cycle cost optimization, specific fan power for individual fans will be between 0.5 and 1kW/m{sup 3}/s. Data from nearly 1000 audited fans in Sweden show that the average measured SFPI weighted by drawn motor power is 1.5 kW/m{sup 3}/s and the situation appears to be similar in other countries. Contract forms used by Swedish builders, and consultants` design practices are analyzed here to search for an explanation to the low performance of installed systems. Identified as two major barriers to efficient system design are the lack of performance specifications when procuring systems and the incentive structure in the building sector. As a consequence, duct design methods, rules of thumb, and vendor recommendations are not leading to system optimization. The broad minima in life cycle costs over a range of air-handling unit sizes show that potential economic welfare losses from efficiency standards are likely to be smaller than the losses that result from today`s design practices. 73 refs, 4 figs, 3 tabs

Technical democracy as a challenge to urban studies

DEFF Research Database (Denmark)

Farías, Ignacio; Blok, Anders

2016-01-01

What is technical democracy? And why does it matter for urban studies? As an introduction to this special feature, we address these questions by reflecting on To Our Friends, the 2014 manifesto of the Invisible Committee. We engage in particular its provocative diagnosis of the current situation......: power no longer resides in the modern institutions of representative democracy and the market economy; instead, power has become a matter of logistics, infrastructures and expertise. This diagnosis, we suggest, brings into view the challenge of technical democracy, that is, the democratization of techno......-scientific expertise and the instauration of forms of lasting collaboration among experts and laypeople. Urban politics, we claim, increasingly turns around socio-technical controversies and it is in terms of the politics of expertise that we should analyse and engage it. Building on Science and Technology Studies...

Remote-handled transuranic system assessment appendices. Volume 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

Remote-handled transuranic system assessment appendices. Volume 2

International Nuclear Information System (INIS)

1995-11-01

Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives

Biogas. Present situation and future potential; Biogas. Nulaege och framtida potential

Energy Technology Data Exchange (ETDEWEB)

Nordberg, Ulf [Swedish Inst. of Agricultural and Environmental Engineering, Uppsala (Sweden)

2006-12-15

The report contains a general overview of present technology concerning production of biogas through anaerobic breakdown of easily recycled organic material as well as implementation areas for biogas. The work has been done in three parts: description of present situation, technical limitations and development efforts, synthesis. In Sweden there are more than 220 biogas plants for handling crops, sludge and organic residue material. Production of biogas occurs primarily at sewage treatment plants and landfills. Total capacity in 2004 was approx. 300,000 m{sup 3} anaerobic chamber volume, of which approx. 73% was utilised. Planned increase in capacity was approx. 125,000 m{sup 3} or approx. 42%.The substrate brought to the plants was comprised of approx. 45% manure, 30% offal, 10% biowaste from households and 15% other substrates. Calculations based on the energy content of input substrate indicate that approx. 10% of the gas was from manure, 65% from offal, 25% from household waste and 5% from other substrates. In 2005 a total of 1,5 TWh of biogas was produced in Sweden. Biogas is used primarily for heating purposes followed by use as vehicle fuel and in electricity production. More than 55 GWh is torched away. Sewage treatment plants are not included. Interest in using biogas as fuel has increased. The theoretical biogas potential in Sweden has been calculated to be 14-17 TWh per year, of which approx. 80% is found in agriculturally related biomass. Approximately 3 TWh originates from various types of household and industrial waste. Generally it can be said that there is a large potential for improvement and increased efficiency within the whole chain of substrate collection, preparatory treatment of substrates, operational control of biogas plants, upgrade/treatment and use of gas as well as spreading and use of biofertilizer. The greatest increase in substrate will come from the amount of crops from the agricultural sector. The contacts between farmers and plant

Technical School Councils for Inclusion and Educational Equity in Basic Education in Tlaxcala, Mexico

Directory of Open Access Journals (Sweden)

Adriana Carro-Olvera

2017-11-01

Full Text Available Technical School Councils are chartered organizations responsible for the achievement of students’ learning, and the identification of challenges that schools have to face to promote their improvement. Thus, this article aims to analyze, based on follow-up and evaluation, the performance of schools and what they have developed to guarantee an inclusive education. A participatory research-action proposal was designed in two stages to reach this aim. The first stage related to the preparation of a situational diagnostic with participants from different levels and modalities (which included basic education: primary and secondary schools, in the areas of educational quality, inclusion, and equity. The second one related to a pedagogic intervention proposal during the school year 2015-2016 in 214 technical school councils, selected among 1,222 schools in the state. In addition to imprecise strategies to avoid situations of risk and educational exclusion, the results obtained identified school planning, collaborative work, technical pedagogic counseling, and leadership as themes to be consolidated.

DDOS ATTACK DETECTION SIMULATION AND HANDLING MECHANISM

Directory of Open Access Journals (Sweden)

Ahmad Sanmorino

2013-11-01

Full Text Available In this study we discuss how to handle DDoS attack that coming from the attacker by using detection method and handling mechanism. Detection perform by comparing number of packets and number of flow. Whereas handling mechanism perform by limiting or drop the packets that detected as a DDoS attack. The study begins with simulation on real network, which aims to get the real traffic data. Then, dump traffic data obtained from the simulation used for detection method on our prototype system called DASHM (DDoS Attack Simulation and Handling Mechanism. From the result of experiment that has been conducted, the proposed method successfully detect DDoS attack and handle the incoming packet sent by attacker.

A study evaluating if targeted training for startle effect can improve pilot reactions in handling unexpected situations in a flight simulator

Science.gov (United States)

Gillen, Michael William

Recent airline accidents point to a crew's failure to make correct and timely decisions following a sudden and unusual event that startled the crew. This study sought to determine if targeted training could augment decision making during a startle event. Following a startle event cognitive function is impaired for a short duration of time (30-90 seconds). In aviation, critical decisions are often required to be made during this brief, but critical, time frame. A total of 40 volunteer crews (80 individual pilots) were solicited from a global U.S. passenger airline. Crews were briefed that they would fly a profile in the simulator but were not made aware of what the profile would entail. The study participants were asked to complete a survey on their background and flying preferences. Every other crew received training on how to handle a startle event. The training consisted of a briefing and simulator practice. Crew members (subjects) were either presented a low altitude or high altitude scenario to fly in a full-flight simulator. The maneuver scenarios were analyzed using a series of one-way ANOVAs, t-tests and regression for the main effect of training on crew performance. The data indicated that the trained crews flew the maneuver profiles significantly better than the untrained crews and significantly better than the Federal Aviation Administration (FAA) Airline Transport Pilot (ATP) standards. Each scenario's sub factors were analyzed using regression to examine for specific predictors of performance. The results indicate that in the case of the high altitude profile, problem diagnosis was a significant factor, in the low altitude profile, time management was also a significant factor. These predicators can be useful in further targeting training. The study's findings suggest that targeted training can help crews manage a startle event, leading to a potential reduction of inflight loss of control accidents. The training was broad and intended to cover an

Licence template for mobile handling and storage of radioactive substances for the nondestructive testing of materials; Mustergenehmigung zur ortsveraenderlichen Verwendung und Lagerung radioaktiver Stoffe im Rahmen der zerstoerungsfreien Materialpruefung

Energy Technology Data Exchange (ETDEWEB)

Lange, A. [Niedersaechsisches Ministerium fuer Umwelt, Energie und Klimaschutz (Germany); Schumann, J. [Landesamt fuer Arbeitsschutz, Gesundheitsschutz und technische Sicherheit, Berlin (Germany); Huhn, W.

2016-07-01

The Technical Committee ''Radiation Protection'' (Fachausschuss ''Strahlenschutz'') and the Laender Committee ''X-ray ordinance'' (Laenderausschuss ''Roentgenverordnung'') have appointed a working group for the formulation of licence templates for the nationwide use of X-ray equipment or handling of radioactive substances. To date, the following licence templates have been adopted: - Mobile operation of X-ray equipment under technical radiography to the coarse structural analysis in material testing; - Mobile operation of a handheld X-ray fluorescence system; - Mobile operation of a flash X-ray system; - Operation of an X-ray system for teleradiology The licence template ''Mobile handling and storage of radioactive substances for the nondestructive testing of materials'' is scheduled for publication. The licence template ''Practices in external facilities and installations'' is currently being revised. The licence template ''Mobile handling and storage of radioactive substances for the nondestructive testing of materials'' is used as an example to demonstrate the legal framework and the results of the working group.

Nuclear energy : Present situation and future prospects

International Nuclear Information System (INIS)

Gray, J.E.

1986-01-01

In 1953, President Eisenhower announced the U.S. ''Atoms for Peace'' program. After slightly more than 30 years, there are in operation, under construction or on order more than 400,000 MW of commercial nuclear power generation capacity located in 35 nations, representing a total investment around a trillion U.S. dollars. The situation is noteworthy in terms of the rate of technical development, deployment and transfer, the magnitude of the financial investment, economic benefits, the favorable impact on public health and safety, and the usual and positive character of cooperation among all concerned. The fundamentals of nuclear power generation with regard to economics, safety and environmental impact are likely to favor the increased use of nuclear power. The future prospect of the nuclear power in the U.S. also will be clarified positively. In many ways, U.S. commercial nuclear power continues to benefit from the Navy nuclear propulsion program. The prospect of supply demand situation in the conversion, enrichment and fabrication of uranium fuel is explained. The amount of spent fuel arising in OECD countries and their storage capability up to 2000 are shown, and the storage capability projected is well in excess. (Kako, I.)

Potentials and limits of electronic situation displays

International Nuclear Information System (INIS)

Hable, K.; Hoebler, C.; Bieringer, P.

2007-01-01

In the field of precautionary radiation protection and disaster response, the amount of information and the number of its sources is steadily increasing. Central compilation and instant availability of information for all involved authorities becomes more and more important. In this context the structured presentation of documents on a web server in terms of an ''Electronic Situation Display'' (ESD) has been established. In Germany, there are several Electronic Situation Display prototypes run by federal and state authorities for various purposes and using different technical approaches. The systems of the federal states focus on workflow management. They provide emergency log books and information on the implementation of countermeasures for disaster response authorities. The Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) tasked the Federal Office for Radiation Protection (BfS) to develop the Federal Electronic Situation Display (ELAN) that is mainly used as an information platform for decision making in case of nuclear emergencies. Documents containing radiological data or results from Decision Support Systems are almost automatically integrated into ELAN. Read and write permissions for users are managed by a concept of specific roles. The federal ESD and the systems of the federal states will be coordinated in order to achieve a better harmonisation. Interfaces for data exchange and data processing must be defined. Authorities of the federal states can use protected areas within the federal ESD where information is kept confidential for internal use before it is distributed to other states and federal authorities. In addition, key information of Electronic Situation Displays from the federal states can automatically be integrated into ELAN. Several task groups of the IAEA are working on the development and realization of a prototype for an information platform harmonising ESDs on international level. (orig.)

Ergonomics of disposable handles for minimally invasive surgery.

Science.gov (United States)

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

Superphenix: technical and scientific achievements

International Nuclear Information System (INIS)

Guidez, Joel; Prele, Gerard

2016-04-01

In this book, the authors propose a synthesis of technical and scientific achievements related to the design, fabrication and eleven-year operation of Superphenix, the most powerful fast breeder reactor ever built and operated. They had the opportunity to use various and important archives maintained by the different involved institutions, actors and companies, such as the CEA with its MADONA database, AREVA and EDF. They address all the different fields: construction, chemistry, exploitation, handling, small and large components, materials, fuel manufacturing, environmental assessment, thermal hydraulics, the sodium-water reaction, sodium fires, the release of residual power, in-service inspection, and dismantling operations. Moreover, a chapter addresses design studies for Superphenix 2 and for the European Fast Reactor (EFR) which should be the successors of Superphenix

Radiological safety aspects of handling plutonium

International Nuclear Information System (INIS)

Sundararajan, A.R.

2016-01-01

Department of Atomic Energy in its scheme of harnessing the nuclear energy for electrical power generation and strategic applications has given a huge role to utilization of plutonium. In the power production programme, fast reactors with plutonium as fuel are expected to play a major role. This would require establishing fuel reprocessing plants to handle both thermal and fast reactor fuels. So in the nuclear fuel cycle facilities variety of chemical, metallurgical, mechanical operations have to be carried out involving significant inventories of "2"3"9 Pu and associated radionuclides. Plutonium is the most radiotoxic radionuclide and therefore any facility handling it has to be designed and operated with utmost care. Two problems of major concern in the protection of persons working in plutonium handling facilities are the internal exposure to the operating personnel from uptake of plutonium and transplutonic nuclides as they are highly radiotoxic and the radiation exposure of hands and eye lens during fuel fabrication operations especially while handling recycled high burn up plutonium. In view of the fact that annual limit for intake is very small for "2"3"9Pu and its radiation emission characteristics are such that it is a huge challenge for the health physicists to detect Pu in air and in workers. This paper discusses the principles and practices followed in providing radiological surveillance to workers in plutonium handling areas. The challenges in protecting the workers from receiving exposures to hands and eye lens in handling high burn up plutonium are also discussed. The sites having Pu fuel cycle facilities should have trained medical staff to handle cases involving excessive intake of plutonium. (author)

Enclosure for handling high activity materials

International Nuclear Information System (INIS)

Jimeno de Osso, F.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Enclosure for handling high activity materials

Energy Technology Data Exchange (ETDEWEB)

Jimeno de Osso, F

1977-07-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

Thinking ahead of the surgeon. An interview study to identify scrub nurses' non-technical skills.

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona; Yule, Steven; Mitchell, Janet; Coutts, Kathy; Youngson, George

2011-07-01

Efforts to reduce adverse event rates in healthcare have revealed the importance of identifying the essential non-technical (cognitive and social) skills for safe and effective performance. Previous research on non-technical skills for operating theatre staff has concentrated on doctors rather than nursing professionals. The aim of the study was to identify the critical non-technical skills that are essential for safe and effective performance as an operating theatre scrub nurse. Experienced scrub nurses (n = 25) and consultant surgeons (n = 9) from four Scottish hospitals were interviewed using a semi-structured format. The protocols were designed to identify the main social and cognitive skills required by scrub nurses. Interviews were digitally recorded, transcribed verbatim and independently coded to extract behaviours in order to produce a list of the main non-technical skills for safe and effective scrub nurse performance. The non-technical skills of situation awareness, communication, teamwork, task management and coping with stress were identified as key to successful scrub nurse task performance. Component sets of behaviours for each of these categories were also noted. The interviews with subject matter experts from scrub nursing and surgery produced preliminary evidence that situation awareness, communication, teamwork and coping with stress are the principal non-technical skills required for effective performance as a scrub nurse. Copyright © 2010 Elsevier Ltd. All rights reserved.

Characteristic values of the lumbar load of manual patient handling for the application in workers' compensation procedures.

Science.gov (United States)

Jordan, Claus; Luttmann, Alwin; Theilmeier, Andreas; Kuhn, Stefan; Wortmann, Norbert; Jäger, Matthias

2011-05-26

The human spine is often exposed to mechanical load in vocational activities especially in combination with lifting, carrying and positioning of heavy objects. This also applies in particular to nursing activities with manual patient handling. In the present study a detailed investigation on the load of the lumbar spine during manual patient handling was performed. For a total of 13 presumably endangering activities with transferring a patient, the body movements performed by healthcare workers were recorded and the exerted action forces were determined with regard to magnitude, direction and lateral distribution in the time course with a "measuring bed", a "measuring chair" and a "measuring floor". By the application of biomechanical model calculations the load on the lowest intervertebral disc of the lumbar spine (L5-S1) was determined considering the posture and action force data for every manual patient handling. The results of the investigations reveal the occurrence of high lumbar load during manual patient handling activities, especially in those cases, where awkward postures of the healthcare worker are combined with high action forces caused by the patient's mass. These findings were compared to suitable issues of corresponding investigations provided in the literature. Furthermore measurement-based characteristic values of lumbar load were derived for the use in statement procedures concerning the disease no. 2108 of the German list of occupational diseases. To protect healthcare workers from mechanical overload and the risk of developing a disc-related disease, prevention measures should be compiled. Such measures could include the application of "back-fairer" nursing techniques and the use of "technical" and" small aids" to reduce the lumbar load during manual patient handling. Further studies, concerning these aspects, are necessary.

THE DURATION OF BORDER CONTROL PROCEDURES RELATED TO THE HANDLING OF FREIGHT TRANSPORTED BY MEANS OF SEA-ROAD TRANSPORT CHAINS AS A COMPONENT IN COMPETITIVENESS OF THE POLISH SEAPORTS

Directory of Open Access Journals (Sweden)

Michał Pluciński

2017-09-01

Full Text Available The duration of border control procedures related to the handling of freight transported by means of sea-road transport chains has become a significant component in competitiveness of seaports. The situation in this regard, existing in the Polish seaports, which was unfavourable against the background of other seaports providing services to the same supply base, resulted in the fact that a significant part of freight, i.e. mainly general containerized cargo, was handled outside the Polish seaports. The situation began to change when amendments to the regulations related to VAT (2011 and the so called “Porty 24” Package (2014 were adopted. In majority of the customs offices located in the biggest Polish seaports both the duration of services provided in relation to customs declaration and the duration of the so called “collective customs clearance” were reduced. The number of customs declarations under the simplified procedure also rose significantly. Between 2007 and 2015 customs duties and taxes in relation to the sea-land handling in Gdańsk, Gdynia, Szczecin and Świnoujście rose more than threefold.

[A case of the fatal injury by technical electricity from a mobile device (cell phone) connected to the circuit].

Science.gov (United States)

Rudenko, I A; Kil'dyushov, E M; Koludarova, E M; Morozov, V Yu; Fetisov, V A

2015-01-01

The authors report a case of the fatal injury by technical electricity from a mobile device (cell phone) attached to the circuit in a moist environment as a result of the unsafe handling of the gadget (when taking the bath).

Development of a behavioural marker system for scrub practitioners' non-technical skills (SPLINTS system).

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona; Yule, Steven; Mitchell, Janet; Coutts, Kathy; Youngson, George

2013-04-01

Adverse events still occur despite ongoing efforts to reduce harm to patients. Contributory factors to adverse events are often due to limitations in clinicians' non-technical skills (e.g. communication, situation awareness), rather than deficiencies in technical competence. We developed a behavioural rating system to provide a structured means for teaching and assessing scrub practitioners' (i.e. nurse, technician, operating department practitioner) non-technical skills. Psychologists facilitated focus groups (n = 4) with experienced scrub practitioners (n = 16; 4 in each group) to develop a preliminary taxonomy. Focus groups reviewed lists of non-technical-skill-related behaviours that were extracted from an interview study. The focus groups labelled skill categories and elements and also provided examples of good and poor behaviours for those skills. An expert panel (n = 2 psychologists; n = 1 expert nurse) then used an iterative process to individually and collaboratively review and refine those data to produce a prototype skills taxonomy. A preliminary taxonomy containing eight non-technical skill categories with 28 underlying elements was produced. The expert panel reduced this to three categories (situation awareness, communication and teamwork, task management), each with three underlying elements. The system was called the Scrub Practitioners' List of Intraoperative Non-Technical Skills system. A scoring system and a user handbook were also developed. A prototype behavioural rating system for scrub practitioners' non-technical skills was developed, to aid in teaching and providing formative assessment. This important aspect of performance is not currently explicitly addressed in any educational route to qualify as a scrub practitioner. © 2012 Blackwell Publishing Ltd.

Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1--July 31, 1998

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

Progress is reported on research projects related to the following: Electronic resource library; Environment, safety, and health; Communication, education, training, and community involvement; Nuclear and other materials; and Reporting, evaluation, monitoring, and administration. Technical studies investigate remedial action of high explosives-contaminated lands, radioactive waste management, nondestructive assay methods, and plutonium processing, handling, and storage.

Specialization and Flexibility in Port Cargo Handling

Directory of Open Access Journals (Sweden)

Hakkı KİŞİ

2016-11-01

Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

Technical problems and future underground engineering experiments

Energy Technology Data Exchange (ETDEWEB)

Higgins, G H [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

1969-07-01

The technical problems to be solved in future underground engineering experiments are of two kinds. One concerns adequate description of the variation of nuclear explosion effects with physical nd chemical properties of the explosion site. The other concerns engineering of the explosive detonation system to provide adequate safety and security, concurrently with minimum total costs per explosion. The semiempirical equations for explosion effects can be trusted only in the range of explosive energy, depth of burst, and rock type for which there is prior experience. Effects calculations based on the principles of continuum mechanics and measurable geophysical properties appear to work in the few test cases, such as Gasbuggy, to which they have been applied. These calculational methods must be tested in a variety of situations. The relevance of dynamic and static measurements on Dragon Trail, Bronco, Rulison, Stoop, Ketch, and Pinedale to proving the methods are discussed in this paper. The traditional methods of assembling and fielding nuclear explosives have evolved from practice at the Nevada Test Site. These provide great flexibility and assure maximum recovery of all data from each test, thus minimizing the time required to achieve desired results. Timing and firing, radiation monitoring, explosives assembly and emplacement, explosive performance, weather monitoring, and dynamic measurements of earth and building motion have all been handled traditionally as independent functions. To achieve lower costs in underground engineering experiments and projects, one prototype system combining all electronic, measurement, and communication functions is being built. Much further work will be required to complete this effort, including, especially, an examination of safety criteria and means for assuring operational and public safety at reduced costs. (author)

Technical problems and future underground engineering experiments

International Nuclear Information System (INIS)

Higgins, G.H.

1969-01-01

The technical problems to be solved in future underground engineering experiments are of two kinds. One concerns adequate description of the variation of nuclear explosion effects with physical nd chemical properties of the explosion site. The other concerns engineering of the explosive detonation system to provide adequate safety and security, concurrently with minimum total costs per explosion. The semiempirical equations for explosion effects can be trusted only in the range of explosive energy, depth of burst, and rock type for which there is prior experience. Effects calculations based on the principles of continuum mechanics and measurable geophysical properties appear to work in the few test cases, such as Gasbuggy, to which they have been applied. These calculational methods must be tested in a variety of situations. The relevance of dynamic and static measurements on Dragon Trail, Bronco, Rulison, Stoop, Ketch, and Pinedale to proving the methods are discussed in this paper. The traditional methods of assembling and fielding nuclear explosives have evolved from practice at the Nevada Test Site. These provide great flexibility and assure maximum recovery of all data from each test, thus minimizing the time required to achieve desired results. Timing and firing, radiation monitoring, explosives assembly and emplacement, explosive performance, weather monitoring, and dynamic measurements of earth and building motion have all been handled traditionally as independent functions. To achieve lower costs in underground engineering experiments and projects, one prototype system combining all electronic, measurement, and communication functions is being built. Much further work will be required to complete this effort, including, especially, an examination of safety criteria and means for assuring operational and public safety at reduced costs. (author)

HMSRP Hawaiian Monk Seal Handling Data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

Planning for dealing with situations of radiation emergencies: A base proposal for Angola Republic

International Nuclear Information System (INIS)

Santos, Jerry Rawlings Pereira dos

2017-01-01

This work aims to establish basic procedures for response to radiological emergency to act in an anomalous or accidental situation due to practices (medical, industrial) and use of radioactive sources in the Republic of Angola or any activities against the State, in order to minimize the impact of contamination and exposure on the population, ensuring the protection of people and the environment from the harmful effects of ionizing radiation. This work proposes to create a group or committee to deal with situations of radiological emergencies capable of strengthening the technical and professional competencies existing in the Country, making the professionals trained to attend to any emergency situation that may occur in the national territory, due to the medical and industrial practices that use radioactive sources, as well as possible radiological accidents and illicit actions of the use of radiation. (author)

Management of transport and handling contracts

CERN Document Server

Rühl, I

2004-01-01

This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.

Ergonomics: safe patient handling and mobility.

Science.gov (United States)

Hallmark, Beth; Mechan, Patricia; Shores, Lynne

2015-03-01

This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

Remote handling equipment

International Nuclear Information System (INIS)

Clement, G.

1984-01-01

After a definition of intervention, problems encountered for working in an adverse environment are briefly analyzed for development of various remote handling equipments. Some examples of existing equipments are given [fr

Welding method by remote handling

International Nuclear Information System (INIS)

Hashinokuchi, Minoru.

1994-01-01

Water is charged into a pit (or a water reservoir) and an article to be welded is placed on a support in the pit by remote handling. A steel plate is disposed so as to cover the article to be welded by remote handling. The welding device is positioned to the portion to be welded and fixed in a state where the article to be welded is shielded from radiation by water and the steel plate. Water in the pit is drained till the portion to be welded is exposed to the atmosphere. Then, welding is conducted. After completion of the welding, water is charged again to the pit and the welding device and fixing jigs are decomposed in a state where the article to be welded is shielded again from radiation by water and the steel plate. Subsequently, the steel plate is removed by remote handling. Then, the article to be welded is returned from the pit to a temporary placing pool by remote handling. This can reduce operator's exposure. Further, since the amount of the shielding materials can be minimized, the amount of radioactive wastes can be decreased. (I.N.)

Emergency situations; Les situations d'urgence

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The nuclear activities are exercised so as to prevent the accidents. They are subjected to a rule whom application is controlled by the Asn. The risk of grave accident is so limited to a very low level of probability. He cannot be however completely pushed aside. The expression ' radiological emergency situation ' indicates a situation which ensues from an incident or of an accident risking to lead to an emission of radioactive materials or a level of radioactivity susceptible to strike a blow at the public health. The term ' nuclear crisis ' is used for the events which can lead to a radiological emergency situation on a nuclear basic installation or during a transport of radioactive materials. The preparation and the management of emergency situations, that they are of natural, accidental or terrorist origin, became a major concern of our society. We propose you of to know more about it in this file. (N.C.)

Development of advanced loop-type fast reactor in Japan (4): An advanced design of the fuel handling system for the enhanced economic competitiveness

International Nuclear Information System (INIS)

Usui, S.; Mihara, T.; Obata, H.; Kotake, S.

2008-01-01

Refueling operation of sodium fast reactor (SFR) is one of major technical issue due to the chemical activities and opaqueness of sodium coolant properties in comparison with that of LWR. In the Japan Atomic Energy Agency (JAEA) sodium cooled Fast Reactor (JSFR) design study, the further reliable and rational fuel handling system (FHS) has been developing based on the experience of safe and reliable fuel handling operation in the existent SFR plants. Some of advanced concepts for the FHS have being studied in order to increase economic competitiveness further by attempting reduction of the amount of the material and the refueling time, and are scheduled to execute elemental tests and/or mock-up tests to confirm their feasibilities. (authors)

Options and processes for spent catalyst handling and utilization.

Science.gov (United States)

Marafi, M; Stanislaus, A

2003-07-18

The quantity of spent hydroprocessing catalysts discarded as solid wastes in the petroleum refining industries has increased remarkably in recent years due to a rapid growth in the hydroprocessing capacity to meet the rising demand for low-sulfur fuels. Due to their toxic nature, spent hydroprocessing catalysts have been branded as hazardous wastes, and the refiners are experiencing pressure from environmental authorities to handle them safely. Several alternative methods such as reclamation of metals, rejuvenation and reuse, disposal in landfills and preparation of useful materials using spent catalysts as raw materials are available to deal with the spent catalyst problem. The technical feasibility as well as the environmental and economic aspects of these options are reviewed. In addition, details of two bench-scale processes, one for rejuvenation of spent hydroprocessing catalysts, and the other for producing non-leachable synthetic aggregate materials that were developed in this laboratory, are presented in this paper.

Liquefied natural gas (LNG) : production, storage and handling. 7. ed.

Energy Technology Data Exchange (ETDEWEB)

Kalra, S; Jaron, K; Adragna, M; Coyle, S; Foley, C; Hawryn, S; Martin, A; McConnell, J [eds.

2003-07-01

This Canadian Standard on the production, storage and handling of liquefied natural gas (LNG) was prepared by the Technical Committee on Liquefied Natural Gas under the jurisdiction of the Steering Committee on Oil and Gas Industry Systems and Materials. It establishes the necessary requirements for the design, installation and safe operation of LNG facilities. The Standard applies to the design, location, construction, operation and maintenance of facilities at any location of the liquefaction of natural gas and for the storage, vaporization, transfer, handling and truck transport of LNG. The training of personnel involved is also included as well as containers for LNG storage, including insulated vacuum systems. It includes non-mandatory guidelines for small LNG facilities but does not apply to the transportation of refrigerants, LNG by rail, marine vessel or pipeline. This latest edition contains changes in working of seismic design requirements and minor editorial changes to several clauses to bring the Standard closer to the US National Fire Protection Association's Committee on Liquefied Natural Gas Standard while maintaining Canadian regulatory requirements. The document is divided into 12 sections including: general requirements; plant site provisions; process equipment; stationary LNG storage containers; vaporization facilities; piping system and components; instrumentation and electrical services; transfer of LNG and refrigerants; fire protection, safety and security; and, operating, maintenance and personnel training. This Standard, like all Canadian Standards, was subject to periodic review and was most recently reaffirmed in 2003. 6 tabs., 6 figs., 3 apps.

Civilsamfundets ABC: H for Handling

DEFF Research Database (Denmark)

Lund, Anker Brink; Meyer, Gitte

2015-01-01

Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling.......Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling....

The technique on handling radiation

International Nuclear Information System (INIS)

1997-11-01

This book describes measurement of radiation and handling radiation. The first part deals with measurement of radiation. The contents of this part are characteristic on measurement technique of radiation, radiation detector, measurement of energy spectrum, measurement of radioactivity, measurement for a level of radiation and county's statistics on radiation. The second parts explains handling radiation with treating of sealed radioisotope, treating unsealed source and radiation shield.

Role of the Technical Information Center in the knowledge management

International Nuclear Information System (INIS)

Morales, Alfredo; Marrero, Carmen; Aguero, Manuel

1999-01-01

Competitive advantage of companies is directly proportional to their capacity for creating, capturing, handling, inventorying, transferring information, and generating knowledge, as well as for implementing best practices, in order to add value to the production process. Creation of an environment that allows carrying out this process efficiently, constitutes a transcendental step toward the systematic and useful application of knowledge management. This paper presents the role of Technical Information Centers, as entities which provide and integrate information and knowledge, within knowledge communities. The Technical Information Center (CIT for the Spanish: Centro de Information Tecnica) of PDVSA-Intevep and its contribution to strengthen the corporate technological intelligence through the information analysis and technical-scientific knowledge diffusion is also analyzed. The petrochemical and petroleum information network (RIPPET) and its data base RIPPET (from the Spanish Red de Informacion Petrolera y Petroquimica), coordinate by the CIT, and the CIT on line, a virtual organization, are also presented. Both are tools which facilitate the transfer of information and knowledge to communities organized within the company to manage knowledge

ENLUB - 12 Months Technical Report WP3: Development of simulative tests

DEFF Research Database (Denmark)

Zhang, Wenqi

A draw bead test has been developed at the Department of Manufacturing Engineering, The Technical University of Denmark. The purpose of the test equipment is to simulate an actual situation in industry where draw beads are applied to constrain movement of sheet material particular in stretch...

Istra district heating system. General technical report. Appendix 1 to the master plan

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

The objective of the master plan project is to improve the heat supply in Istra. The considerable system losses from the fuel supplied to the end-users are one issue for improvement. At the same time, the current system operation results in poor quality heat for the consumers. Due to the inflexibility of the system the dwellings/premises of the consumers are either overheated or insufficiently heated. The financial situation in Istra, the legal ownership of the district heating system and consumers' lacking ability to pay limit the possibilities for system improvements. The Master Plan and Feasibility Study evaluates four different development scenarios. Each of the scenarios is compared to the current situation in Istra, where nothing is done to change the system, but only to operate the present system in a sustainable way. The sustainable operation of the district heating system includes all necessary renovations and component replacements necessary. The project does not take into account the present financial situation in Istra, which has resulted in less maintenance than necessary. This situation is not a comparable parameter, as it is not sustainable and will lead to a breakdown of the heat supply within a short time horizon. The General Technical Report evaluates the technical situation and describes system improvements at a general level. The intention with this report is to provide important information useful to other district heating companies in Russia. (au)

"Service Recovery: The Effects of Complaint Handling on Post-complaint Relationship Intention and Customer Switching Behaviour in the Taiwan Fastener Industry"

OpenAIRE

Hwang, Jui-Chin

2005-01-01

Abstract In recent decades, many industries have started to realize the importance of relationship marketing and effective complaint handling as part of their customer retention strategies. This includes the traditional Taiwan fastener industry, which used to be considered as more technically focused rather than service-oriented. One of the main reasons for this industry to move toward a service orientation is that Taiwanese fastener trading companies have become highly customer-focused, ...

HRA Data Collection from the Simulations of Abnormal Situations

Energy Technology Data Exchange (ETDEWEB)

Kim, Yo Chan; Park, Jink Yun; Jung, Won Dea [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-10-15

In this study, it was revealed that the designed worksheets were feasible to collect HRA data, especially in abnormal situations. The defined taxonomy of UAs was unambiguous to distinguish actions of operators and quantify the probabilities. It is widely recognized that reliability of operators are critical to complex socio-technical systems. For this reason, human reliability analysis (HRA), which aims to identify unsafe actions (UAs) that contribute to risks of the systems and assess the failure rates of the actions, has been conducted. Although many techniques of HRA have been developed and used in many years, many reports indicated lack of database for supporting empirical bases of HRA methods. Thus, there have been recent efforts to collect data about human reliability from plant experience, simulator experiment or qualification, and laboratory experiments. As one of these efforts, KAERI also established a guideline to collect information about human reliability and performance shaping factors from simulators. This guideline particularly presented a set of worksheets that allows comprehensively gathering objectively observable information in simulations of emergency situations. This paper reports the process and preliminary results of the data collection from the simulations of abnormal situations based on the developed worksheets in KAERI database guideline. We analyzed operator behaviors of the sixteen experiments for the two kinds of abnormal situations: RCP (reactor coolant pump) cyclone filter blockage and CDP (condensate pump) valve stuck. The UAs of operators were identified and quantified. Because the number of simulations was limited and data of various situations will be obtained continuously, it is uncertain to conclude the resulted probabilities. Based on the worksheet, operator behaviors in many different kinds of scenarios will be analyzed and the relations between human reliabilities and the observed factors will be also investigated.

Technical recommendations for the use of thermoluminescence for dosimetry in individual monitoring for photons and electrons from external sources

International Nuclear Information System (INIS)

1975-01-01

The principles of thermoluminescence dosimetry and the role it may play in the field of personnel dosimetry are presented. Technical recommendations are made as an indication of what is generally regarded as good practice and they are intended to be of assistance in avoiding the common sources of error. Errors due to: the detector; the evaluation procedure; the thermal treatment; at the sensitivity of the detector to neutrons. The recommendations are concerned with: the choice of detector material; design of thermoluminescent dosemeters; read-out procedure; reader; handling procedures; dose evaluations; automation; documentation and data handling

Handling Pyrophoric Reagents

Energy Technology Data Exchange (ETDEWEB)

Alnajjar, Mikhail S.; Haynie, Todd O.

2009-08-14

Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

Waste Management Technical Manual

Energy Technology Data Exchange (ETDEWEB)

Buckingham, J.S. [ed.

1967-08-31

This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

Technical Considerations in Rehabilitation of an Edentulous Total Glossectomy Patient

Directory of Open Access Journals (Sweden)

Pravin Bhirangi

2012-01-01

Full Text Available The technician by virtue of his profession plays an important role in fabricating silicone tongue prosthesis for a total glossectomy patient. The technician, with his skills and specialized knowledge in handling material, plays a valuable role as a member of the oncology team. A patient with total glossectomy can be rehabilitated by silicone tongue prosthesis as an aid to improve his speech and swallowing. This paper describes the technical steps involved in fabricating a silicone tongue prosthesis for an edentulous total glossectomy patient.

European Model Code of safe practice in the storage and handling of petroleum products. Part I. Operations

Energy Technology Data Exchange (ETDEWEB)

1973-01-01

This safe practice code was prepared by a working group consisting of experts from 10 Western European countries. It consists of short guidelines and technical advice on general precautions, injuries and medical services, permits to work, fire prevention and fighting, jetties, pipework, storage tanks, static electricity, electrical equipment, road vehicles, tank cars, handling of bitumen products, liquefied petroleum gases, packed products and training of personnel. The code is supplemented by 10 appendices, including a suggested syllabus for a 2-day course on fire prevention and emergency action for managers of oil installations.

The effect of ergonomic laparoscopic tool handle design on performance and efficiency.

Science.gov (United States)

Tung, Kryztopher D; Shorti, Rami M; Downey, Earl C; Bloswick, Donald S; Merryweather, Andrew S

2015-09-01

Many factors can affect a surgeon's performance in the operating room; these may include surgeon comfort, ergonomics of tool handle design, and fatigue. A laparoscopic tool handle designed with ergonomic considerations (pistol grip) was tested against a current market tool with a traditional pinch grip handle. The goal of this study is to quantify the impact ergonomic design considerations which have on surgeon performance. We hypothesized that there will be measurable differences between the efficiency while performing FLS surgical trainer tasks when using both tool handle designs in three categories: time to completion, technical skill, and subjective user ratings. The pistol grip incorporates an ergonomic interface intended to reduce contact stress points on the hand and fingers, promote a more neutral operating wrist posture, and reduce hand tremor and fatigue. The traditional pinch grip is a laparoscopic tool developed by Stryker Inc. widely used during minimal invasive surgery. Twenty-three (13 M, 10 F) participants with no existing upper extremity musculoskeletal disorders or experience performing laparoscopic procedures were selected to perform in this study. During a training session prior to testing, participants performed practice trials in a SAGES FLS trainer with both tools. During data collection, participants performed three evaluation tasks using both handle designs (order was randomized, and each trial completed three times). The tasks consisted of FLS peg transfer, cutting, and suturing tasks. Feedback from test participants indicated that they significantly preferred the ergonomic pistol grip in every category (p < 0.05); most notably, participants experienced greater degrees of discomfort in their hands after using the pinch grip tool. Furthermore, participants completed cutting and peg transfer tasks in a shorter time duration (p < 0.05) with the pistol grip than with the pinch grip design; there was no significant difference between completion

Characteristic values of the lumbar load of manual patient handling for the application in workers' compensation procedures

Directory of Open Access Journals (Sweden)

Wortmann Norbert

2011-05-01

Full Text Available Abstract Background The human spine is often exposed to mechanical load in vocational activities especially in combination with lifting, carrying and positioning of heavy objects. This also applies in particular to nursing activities with manual patient handling. In the present study a detailed investigation on the load of the lumbar spine during manual patient handling was performed. Methods For a total of 13 presumably endangering activities with transferring a patient, the body movements performed by healthcare workers were recorded and the exerted action forces were determined with regard to magnitude, direction and lateral distribution in the time course with a "measuring bed", a "measuring chair" and a "measuring floor". By the application of biomechanical model calculations the load on the lowest intervertebral disc of the lumbar spine (L5-S1 was determined considering the posture and action force data for every manual patient handling. Results The results of the investigations reveal the occurrence of high lumbar load during manual patient handling activities, especially in those cases, where awkward postures of the healthcare worker are combined with high action forces caused by the patient's mass. These findings were compared to suitable issues of corresponding investigations provided in the literature. Furthermore measurement-based characteristic values of lumbar load were derived for the use in statement procedures concerning the disease no. 2108 of the German list of occupational diseases. Conclusions To protect healthcare workers from mechanical overload and the risk of developing a disc-related disease, prevention measures should be compiled. Such measures could include the application of "back-fairer" nursing techniques and the use of "technical" and" small aids" to reduce the lumbar load during manual patient handling. Further studies, concerning these aspects, are necessary.

ATA diagnostic data handling system: an overview

International Nuclear Information System (INIS)

Chambers, F.W.; Kallman, J.; McDonald, J.; Slominski, M.

1984-01-01

The functions to be performed by the ATA diagnostic data handling system are discussed. The capabilities of the present data acquisition system (System 0) are presented. The goals for the next generation acquisition system (System 1), currently under design, are discussed. Facilities on the Octopus system for data handling are reviewed. Finally, we discuss what has been learned about diagnostics and computer based data handling during the past year

Results from Consultancy Meeting on Qualified Technical Centres

International Nuclear Information System (INIS)

Novakovic, Mladen

2017-01-01

Qualified Technical Centres (QTC) - Current Situation: •Many Member States (MS) need help dealing with DSRS; •Most seek assistance, which can include funding, through the IAEA; •Technical assistance is provided by various governmental organization and private companies (service providers = SP). QTC - Method of Delivery Numerous MS requests are pressing the IAEA’s capacity to assist: •Use qualified internal and external experts/contractors; •Limited pool for DSRS and need to expand; •Dedicated and specialized equipment; •Mobile hot cell; •Mobile tool kit; •Field operations; •Coordinated approach with Nuclear Security and Safety. Qualified Technical Centres for the Management of DSRS: •The challenge is to scale up the support for safe and secure management of DSRS; •Strengthen existing capacity of some MS to support others and make support more sustainable; •Expands the support that can be readily provided and meet the many needs of MS

Automation of 3D micro object handling process

DEFF Research Database (Denmark)

Gegeckaite, Asta; Hansen, Hans Nørgaard

2007-01-01

Most of the micro objects in industrial production are handled with manual labour or in semiautomatic stations. Manual labour usually makes handling and assembly operations highly flexible, but slow, relatively imprecise and expensive. Handling of 3D micro objects poses special challenges due to ...

Discrepant perceptions of communication, teamwork and situation awareness among surgical team members.

Science.gov (United States)

Wauben, L S G L; Dekker-van Doorn, C M; van Wijngaarden, J D H; Goossens, R H M; Huijsman, R; Klein, J; Lange, J F

2011-04-01

To assess surgical team members' differences in perception of non-technical skills. Questionnaire design. Operating theatres (OTs) at one university hospital, three teaching hospitals and one general hospital in the Netherlands. Sixty-six surgeons, 97 OT nurses, 18 anaesthetists and 40 nurse anaesthetists. All surgical team members, of five hospitals, were asked to complete a questionnaire and state their opinion on the current state of communication, teamwork and situation awareness at the OT. Ratings for 'communication' were significantly different, particularly between surgeons and all other team members (P ≤ 0.001). The ratings for 'teamwork' differed significantly between all team members (P ≤ 0.005). Within 'situation awareness' significant differences were mainly observed for 'gathering information' between surgeons and other team members (P communication, teamwork and situation awareness. Future research needs to ascertain whether these discrepancies are linked to greater risk of adverse events or to process as well as systems failures. Establishing this link would support implementation and use of complex team interventions that intervene at multiple levels of the healthcare system.

A safety-critical decision support system evaluation using situation awareness and workload measures

International Nuclear Information System (INIS)

Naderpour, Mohsen; Lu, Jie; Zhang, Guangquan

2016-01-01

To ensure the safety of operations in safety-critical systems, it is necessary to maintain operators' situation awareness (SA) at a high level. A situation awareness support system (SASS) has therefore been developed to handle uncertain situations [1]. This paper aims to systematically evaluate the enhancement of SA in SASS by applying a multi-perspective approach. The approach consists of two SA metrics, SAGAT and SART, and one workload metric, NASA-TLX. The first two metrics are used for the direct objective and subjective measurement of SA, while the third is used to estimate operator workload. The approach is applied in a safety-critical environment called residue treater, located at a chemical plant in which a poor human-system interface reduced the operator's SA and caused one of the worst accidents in US history. A counterbalanced within-subjects experiment is performed using a virtual environment interface with and without the support of SASS. The results indicate that SASS improves operators' SA, and specifically has benefits for SA levels 2 and 3. In addition, it is concluded that SASS reduces operator workload, although further investigations in different environments with a larger number of participants have been suggested. - Highlights: • The suitability of a cognitive decision support system is investigated. • An evaluation approach considering situation awareness and workload measures is proposed. • A computerized system based on the proposed approach is implemented. • The implemented system is used in a safety-critical environment.

The replacement of technically obsolete equipments

International Nuclear Information System (INIS)

Anglaret, Ph.; Patouillaud, M.

1987-01-01

The paper covers the analysis of procedures for replacement of technically obsolete but still operational equipments in use in a nuclear power plant. The Three Mile Island accident showed that operators in the control room reqire additional information at their disposal. In 1986 CGEE Alsthom received two orders for improvements to control systems, for the South African nuclear power plant Koeberg and the Dutch nuclear power plant Borssele. The new systems will provide support to normal operation and offer additional help in accident situations. 4 figs

Technical solutions to enable embedded generation growth

Energy Technology Data Exchange (ETDEWEB)

Lynch, C.A.; Todd, S.; Millar, W.; Wood, H.S.

2003-07-01

This report describes the results of one of a series of studies commissioned by the UK Department of Trade and Industry into various aspects of embedded generation with the aim of supporting the development and deployment of electrical sources (particularly their ease of connection to the network) to deliver power to consumers. The first phase of the project involved a literature review and meetings with embedded generation developers and planning engineers from distribution network operators (DNOs). The second phase investigated embedded generation at different levels of the distribution network and included modelling a representative network. Technologies that could facilitate a significant increase in embedded generation were identified and estimates made of when and where significant development would be needed. Technical problems identified by DNOs were concerned with thermal loading, voltage regulation, fault levels, protection and network operation. A number of non-technical (commercial and regulatory) problems were also identified. The report describes the UK regulatory framework, the present situation, the British power system, the accommodation of embedded generation by established means, the representative model and technical innovations.

Technical nursing students interacting with family members of hospitalized children

Directory of Open Access Journals (Sweden)

Juliana Yukari Takahashi Onishi

Full Text Available ABSTRACT Objective: To understand technical nursing students' meaning of interacting with family members of hospitalized children. Method: Symbolic Interactionism was used as the theoretical framework and Qualitative Content Analysis was the methodological procedure. A total of eight graduates from an institution situated in the city of Osasco, Sao Paulo state, participated in this study. Data were collected through semi-structured interviews. Results: A total of five representative themes were revealed: Dealing with difficult situations with family members; Perceiving oneself to be unprepared to interact with family members; Family members being a helpful tool; Developing strategies to obtain a good interaction with family members; and Teachers being facilitators of the interaction with family members. Final considerations: To be acquainted with this experience has led to the understanding of the need to include the theme of family care in the curriculum of the Technical Nursing Course. Additionally, the present study contributed to reflections on the importance of such knowledge for this population and to the development of future studies, as this theme has been scarcely explored in the literature.

Technical nursing students interacting with family members of hospitalized children.

Science.gov (United States)

Onishi, Juliana Yukari Takahashi; Ribeiro, Circéa Amália; Silva, Maria Cristina Ferreira Carlos Rodrigues da; Borba, Regina Issuzu Hirooka de

2017-01-01

To understand technical nursing students' meaning of interacting with family members of hospitalized children. Symbolic Interactionism was used as the theoretical framework and Qualitative Content Analysis was the methodological procedure. A total of eight graduates from an institution situated in the city of Osasco, Sao Paulo state, participated in this study. Data were collected through semi-structured interviews. A total of five representative themes were revealed: Dealing with difficult situations with family members; Perceiving oneself to be unprepared to interact with family members; Family members being a helpful tool; Developing strategies to obtain a good interaction with family members; and Teachers being facilitators of the interaction with family members. To be acquainted with this experience has led to the understanding of the need to include the theme of family care in the curriculum of the Technical Nursing Course. Additionally, the present study contributed to reflections on the importance of such knowledge for this population and to the development of future studies, as this theme has been scarcely explored in the literature.

Scheduling of outbound luggage handling at airports

DEFF Research Database (Denmark)

Barth, Torben C.; Pisinger, David

2012-01-01

This article considers the outbound luggage handling problem at airports. The problem is to assign handling facilities to outbound flights and decide about the handling start time. This dynamic, near real-time assignment problem is part of the daily airport operations. Quality, efficiency......). Another solution method is a decomposition approach. The problem is divided into different subproblems and solved in iterative steps. The different solution approaches are tested on real world data from Frankfurt Airport....

Sequence trajectory generation for garment handling systems

OpenAIRE

Liu, Honghai; Lin, Hua

2008-01-01

This paper presents a novel generic approach to the planning strategy of garment handling systems. An assumption is proposed to separate the components of such systems into a component for intelligent gripper techniques and a component for handling planning strategies. Researchers can concentrate on one of the two components first, then merge the two problems together. An algorithm is addressed to generate the trajectory position and a clothes handling sequence of clothes partitions, which ar...

Enhanced wood fuel handling: market and design studies

Energy Technology Data Exchange (ETDEWEB)

Landen, R.; Rippengal, R.; Redman, A.N.

1997-09-01

This report examines the potential for the manufacture and sale of novel wood fuel handling systems as a means of addressing users' concerns regarding current capital costs and potential high labour costs of non-automated systems. The report considers fuel handling technology that is basically appropriate for wood-fired heating systems of between c.100kW and c.1MW maximum continuous rating. This report details work done by the project collaborators in order to: (1) assess the current status of wood fuel handling technology; (2) evaluate the market appetite for improved wood fuel handling technology; (3) derive capital costs which are acceptable to customers; (4) review design options; and (5) select one or more design options worthy of further development. The current status of wood fuel handling technology is determined, and some basic modelling to give guidance on acceptable capital costs of 100-1000kW wood fuel handling systems is undertaken. (author)

Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process

Science.gov (United States)

Saffar, Seha; Azni Jafar, Fairul; Jamaludin, Zamberi

2016-02-01

A case study was selected as a method to collect data in actual industry situation. The study aimed to assess the influences of automated material handling system in automotive industry by proposing a new design of integration system through simulation, and analyze the significant effect and influence of the system. The method approach tool will be CAD Software (Delmia & Quest). The process of preliminary data gathering in phase 1 will collect all data related from actual industry situation. It is expected to produce a guideline and limitation in designing a new integration system later. In phase 2, an idea or concept of design will be done by using 10 principles of design consideration for manufacturing. A full factorial design will be used as design of experiment in order to analyze the performance measured of the integration system with the current system in case study. From the result of the experiment, an ANOVA analysis will be done to study the performance measured. Thus, it is expected that influences can be seen from the improvement made in the system.

BL N4: acoustical situation in the exploitation workrooms

International Nuclear Information System (INIS)

Lambert, C.; Lecointre, C.; Nicolas, M.; Feuermann, M.

1993-12-01

This report presents some aspects of the acoustical situation in the workrooms of the electricity building of the nuclear plant N4 of Chooz. It enables us to draw up a diagnosis of the present situation. This diagnosis will contribute to the choice of the technical solutions, at the conception of this type of building. A particular study is devoted to the kitchen of the building. This study shows the impact of a RRI (intermediary refrigeration circuit), which is responsible for a high noise level in this room. The fixation type of the pipe appears to be the cause of the annoyance. This study justifies the need for the uncoupling between this pipe type and the building structures, at the conception time. Noise levels measured in the different rooms are essentially induced by the ventilation networks. This levels are generally too high, compared with the objectives. This leads us to consider that the installation rules about the ventilation network are still to define. (authors). 7 figs., 2 annexes

Annual meeting on nuclear technology '92. Technical session 'Nuclear energy discussion'

International Nuclear Information System (INIS)

1992-05-01

The report contains the six special papers red at the 1992 annual conference on nuclear engineering at Karlsruhe, all of which are individually retrievable from the database. They deal with the following subjects: historical development of the basic trends of technology criticism; communication problems in connection with the conveying of technical facts; psycho-sociological patterns of technology anxiety-mental infection or risk consciousness; field of tension between technology and journalism; handling of insecurities; ethical justifiability of nuclear energy use. (HSCH) [de

The radiological situation at the atolls of Mururoa and Fangataufa. Technical report. V. 1. Radionuclide concentrations measured in the terrestrial environment of the atolls

International Nuclear Information System (INIS)

1998-08-01

This report provides technical details of the terrestrial sampling and measurement campaign undertaken as part of the Study of the Radiological Situation at the Atolls of Mururoa, Fangataufa by the Terrestrial Working Group. The primary objective of this group was to evaluate existing French data on the presence of environmental radionuclides on the atolls of Mururoa, Fangataufa and Tureia in French Polynesia. All aspects of the terrestrial environments of Mururoa and Fangataufa Atolls - the sites of atmospheric and underground nuclear tests - were included in the sampling programme. Tureia Atoll - the nearest inhabited island - was also included in the sampling programme, in order to determine whether deposits from atmospheric testing are detectable there. The task required the co-operation of many different parties in order to provide the supporting logistics for the sampling campaign and the expertise for analysing the different radionuclides of interest in the samples collected. Samples were analysed by members of the IAEA's co-ordinated international network of Analytical Laboratories for Measuring Environmental Radioactivity (ALMERA) and the Agency's laboratories, Seibersdorf. Samples were also sent to the French Service Mixte de Surveillance Radiologique et Biologique (SMSRB)

Underground transportation and handling system for Pollux-casks

International Nuclear Information System (INIS)

Schrimpf, C.

1988-01-01

The concept for the underground transportation and handling system for Pollux-casks was optimized in a first phase by dividing the process in the repository up into the several transportation and manipulation steps. For each step, the possibilities were described and evaluated by means of a list of criteria (technical, safety and economical criteria). The following concept for the transportation and handling was developed: The casks are transported to the unloading area of the surface facilities by railway or truck. After removal of the transport protection, the entry control is performed. The cask is lifted from the vehicle and placed on a railbound transportation vehicle. This transport unit is transferred to the shaft and placed there ready for shaft hoisting. With the hoisting cage protruding, the transport unit is placed on the hoisting cage by means of a pushing-on device, locked, and then conveyed underground. After arrival on the emplacement level, the transport unit is pulled-off from the hoisting cage and taken over by a mine locomotive and transferred through the transportation and access drifts as far as to the emplacement site. There the locomotive pushed the rail transport vehicle into the emplacement drift, as far as to the designated emplacement position. At the emplacement position, the cask is again lifted by means of hoisting equipment. The rail transport vehicle is pulled out of the emplacement drift and returned to the surface for reloading. After deposition of the cask on the drift floor, the emplacement equipment is pulled back in order to give the operation space free for the slinger backfill truck. Within preceding tests two different backfilling techniques were investigated under realistic conditions: pneumatic backfilling and slinger backfilling. The slinger truck was found to be the most suitable for the designated purpose

Technical obstacles to nuclear security - Russian perspective

International Nuclear Information System (INIS)

Pshakin, G.

2005-01-01

Full text: Present political, economical and social development the world - wide and in particular countries and regions facilitate number of serious and dangerous challenges for people responsible for security of materials and facilities, which could be used as a threat to the humankind in case of unauthorized approach. A number of factors have impact on the security including political, social, financial and technical nature. The security of nuclear materials and facilities where nuclear materials located and under processing is facing a number of problems such as control of the personnel who is handling the materials, access to the materials and the facilities, accounting and control of the materials storage, transportation, transactions, processing, physical protection of the materials. Each aspect of those problems must be taken into account for establishing most efficient way to keep the nuclear materials out of hands of the terrorists. Technical aspects which require serious and intent relation from political and technical communities in Russia (as example) are the following: legal base for nuclear materials protection, control and accounting and export control; personnel for nuclear materials control and accounting - skill, reliability, responsibility, training and new generation education; personnel for physical protection - skill, reliability, responsibility, training; structure of the system and equipment for materials control, verification, accountability; structure of the system and equipment for physical protection; regulatory supervision of the MPC+A system effectiveness. (author)

Internet application: production-technical information system MoNET

International Nuclear Information System (INIS)

Tomiga, J.

2004-01-01

MoNET is the production-technical information system supporting engineering, operational and maintenance processes of distribution network administrator. It utilizes the model of distribution network that is situated in the geo-space relational database. The geo-space database represents an information base of operational-technical processes. It contains elements and equipment s of the distribution network, failures, operational events, maintenance records, but also, parcels, reference planimetry, e.g. and other subjects for which is relevant the positional datum - geo-space information. MoNET is typically exploited in the fields: - evidence of the subjects and equipment of network, technical documentation; - property administration; - planning of network development, support of designing and construction; - technical calculation; - breakdown controller centre; - maintenance management. MoNET can be implemented as the desktop application, however its first benefit is derived from its usage as the intranet application MoNET WEB for the whole enterprise or organisation. This version enables an unrestricted number of end-users to enter this system. The end-users don't need any special software to enter the data of MoNet WEB application, the pre-installed Internet Explorer will do. (author)

Technical economic feasibility study for the implementation of a nuclear power plant for the production of electricity in Colombia

International Nuclear Information System (INIS)

Gonzales, David E.; Bolanos, Hernan G.; Mayorga, Manuel A.; Rodriguez, Edwin A.

2013-01-01

A study on the technical and economic feasibility will be used to implement a nuclear power in Colombia to generate electricity. To this will be searched if there are previous studies on this topic and what they concluded. The manner in which power is supplied will be discussed in a national level nowadays, its strengths and weaknesses. It will be investigated the legal norms that exists in the country on nuclear power and renewable energy sources, the standards established at world level, the nuclear accidents and the great examples. Providers will be sought on the world market nuclear equipment which serve to this purpose and the technical characteristics of these equipment will be discussed. The type of fuel used in nuclear reactors, its origin, method of production, specifications, availability and long-term and safe handling and final disposal are considered. safe handling of this technology and policy or international rules that will studied

Remote handling for an ISIS target change

International Nuclear Information System (INIS)

Broome, T.A.; Holding, M.

1989-01-01

During 1987 two ISIS targets were changed. This document describes the main features of the remote handling aspects of the work. All the work has to be carried out using remote handling techniques. The radiation level measured on the surface of the reflector when the second target had been removed was about 800 mGy/h demonstrating that hands on operations on any part of the target reflector moderator assembly is not practical. The target changes were the first large scale operations in the Target Station Remote Handling Cell and a great deal was learned about both equipment and working practices. Some general principles emerged which are applicable to other active handling tasks on facilities like ISIS and these are discussed below. 8 figs

Technical writing versus technical writing

Science.gov (United States)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Materials Handling. Module SH-01. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on materials handling is one of 50 modules concerned with job safety and health. It presents the procedures for safe materials handling. Discussed are manual handling methods (lifting and carrying by hand) and mechanical lifting (lifting by powered trucks, cranes or conveyors). Following the introduction, 15 objectives (each…

Enclosure for handling high activity materials abstract

International Nuclear Information System (INIS)

Jimeno de Osso, F.; Dominguez Rodriguez, G.; Cruz Castillo, F. de la; Rodriguez Esteban, A.

1977-01-01

One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With that purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. A description is given of those aspects that may be of interest to people working in this field. (author) [es

Consideration on information work under new situation consider the situation, integrate the resources, develop the innovate, improve the information work level

International Nuclear Information System (INIS)

Wu Erni

2010-01-01

The nuclear document information work under the new socioeconomic development situation in China shall focus on the nuclear fuel cycle industry, accelerate the information network informatization process, establish the information network platform so as to improve the management efficiency and benefit and reduce the resource consumption and management cost through publicity and information acquisition; we shall narrow the difference in understanding and application between the specialized technical personnel and informatization personnel during informatization management process, and speed up the structural readjustment through information resources sharing and network information system; during the transformation of the nuclear information work and nuclear resources into effective productive power, we shall conduct management and technology innovation and resource integration according to the development strategy of the enterprise so as to promote the enthusiasm for informatization as well as invention, creation and technological innovation in the enterprise and the whole country, in general, the nuclear information work shall be in the service of the nuclear manufacturing enterprises and we shall change our ideology and work style under the new situation so as to improve the overall capability and level of our scientific and technological information system by advanced science and technology. (author)

Development of tritium-handling technique

International Nuclear Information System (INIS)

Ohmura, Hiroshi; Hosaka, Akio; Okamoto, Takahumi

1988-01-01

The overview of developing activities for tritium-handling techniques in IHI are presented. To establish a fusion power plant, tritium handling is one of the key technologies. Recently in JAERI, conceptual design of FER (Fusion Experimental Reactor) has been carried out, and the FER system requires a processing system for a large amount of tritium. IHI concentrate on investigation of fuel gas purification, isotope separation and storage systems under contract with Toshiba Corporation. Design results of the systems and each components are reviewed. IHI has been developing fundamental handling techniques which are the ZrNi bed for hydrogen isotope storage and isotope separation by laser. The ZrNi bed with a tritium storage capacity of 1000 Ci has been constructed and recovery capability of the hydrogen isotope until 10 -4 Torr {0.013 Pa} was confirmed. In laser isotope separation, the optimum laser wave length has been determined. (author)

Handling of waste in ports

International Nuclear Information System (INIS)

Olson, P.H.

1994-01-01

The regulations governing the handling of port-generated waste are often national and/or local legislation, whereas the handling of ship-generated waste is governed by the MARPOL Convention in most parts of the world. The handling of waste consists of two main phases -collection and treatment. Waste has to be collected in every port and on board every ship, whereas generally only some wastes are treated and to a certain degree in ports and on board ships. This paper considers the different kinds of waste generated in both ports and on board ships, where and how it is generated, how it could be collected and treated. The two sources are treated together to show how some ship-generated waste may be treated in port installations primarily constructed for the treatment of the port-generated waste, making integrated use of the available treatment facilities. (author)

Magnetic resonance imaging of meniscal bucket-handle tears

International Nuclear Information System (INIS)

Dfouni, N.; Garcia, J.; Kindynis, Ph.; Bosson, D.

1997-01-01

To define MR signs of meniscal bucket-handle tears and evaluate the diagnostic efficiency of this technique. Retrospective study of 30 patients with a meniscal bucket-handle tear and 30 with a different type of tear, all proven by arthroscopy. The following MR signs of a bucket-handle tear were evaluated: 'separate meniscal fragment, 'double posterior cruciate ligament', 'snake sign' and 'double anterior horn'. A correct diagnosis of a bucket-handle tear was only made in 18/30 of patients. Several of the MR signs were seen in the same patient in 17 cases. A double posterior cruciate ligament was present only in cases of medial meniscus tears. The 12 menisci without these signs, and therefore not diagnosed as bucket-handle tears, were all classified as meniscal tears on the basis of signal extending to the meniscal surface. Nine of these were not displaced into the inter-condylar notch at arthroscopy. The interobserver agreement was excellent: kappa 0.88. The diagnosis of a bucket-handle meniscal tear, if it is displaced, can be made when one or more of the four MR evaluated signs are present. Other forms of meniscal tears are only exceptionally diagnosed as bucket-handle tears. (authors)

The implementation of the situational control concept of information security in automated training systems

Directory of Open Access Journals (Sweden)

A. M. Chernih

2016-01-01

Full Text Available The main approaches to ensuring security of information in the automated training systems are considered, need of application of situational management of security of information for the automated training systems is proved, the mathematical model and a problem definition of situational control is offered, the technique of situational control of security of information is developed.The purpose of the study. The aim of the study is to base the application of situational control of information security by subsystem of the control and protection of information in automated learning systems and to develop implementation methods of the situational control concept.Materials and methods. It is assumed that the automated learning system is a fragment of a larger information system that contains several information paths, each of them treats different information in the protection degree from information, containing constituting state secrets, to open access information.It is considered that the technical methods, measures and means of information protection in automated learning systems implement less than half (30% functions of subsystems of control and protection information. The main part of the functions of this subsystem are organizational measures to protect information. It is obvious that the task of ensuring the security of information in automated learning systems associated with the adoption of decisions on rational selection and proper combination of technical methods and institutional arrangements. Conditions of practical application of automated learning systems change over time and transform the situation of such a decision, and this leads to the use of situational control methods.When situational control is implementing, task of the protection of information in automated learning system is solved by the subsystem control and protection of information by distributing the processes ensuring the security of information and resources of

How to Handle Impasses in Bargaining.

Science.gov (United States)

Durrant, Robert E.

Guidelines in an outline format are presented to school board members and administrators on how to handle impasses in bargaining. The following two rules are given: there sometimes may be strikes, but there always will be settlements; and on the way to settlements, there always will be impasses. Suggestions for handling impasses are listed under…

Storage, handling and internal transport of radioactive materials (fuel elements excepted) in nuclear power plants

International Nuclear Information System (INIS)

1983-06-01

The rule applies to storage and handling as well as to transport within the plant and to the exchange of - solid radioactive wastes, - liquid radioactive wastes, except for those covered by the rule KTA 3603, - radioactive components and parts which are planned to be mounted and dismounted until shutdown of the plant, - radioactive-contaminated tools and appliances, - radioactive preparations. The rule is to be applied within the fenced-in sites of stationary nuclear power plants with LWR or HTR including their transport load halls, as fas as these are situated so as to be approachable from the nuclear power station by local transport systems. (orig./HP) [de

Dynamic Socio-technical System Design based on Stakeholder Interaction

Directory of Open Access Journals (Sweden)

Albert Fleischmann

2015-07-01

Full Text Available In order to directly involve stakeholders in socio-technical system design, we argue for streamlining executable process specifications with business process modeling. Due to current agility requirements of organizations, socio-technical system development is considered one of the key activities of members of the organizations. Dynamic process adaptation enable handling the volatility of business operation and IT infrastructure. Subject-oriented process representations are key enablers to dynamic adaptation due to their capability for stakeholders to create directly executable models. In this way stakeholder can be involved in change management pro-actively. Subject-oriented models (i represent all relevant features required for system control and decision making, and (ii are executable on demand. This effectiveness enables organizational change in a creative and efficient way, while establishing innovative design and change management tools. Subject-oriented Business Process Management capabilities are reflected in this realm revealing benefits and potential for further research.

Enhancing Evacuation Plans with a Situation Awareness System Based on End-User Knowledge Provision

Directory of Open Access Journals (Sweden)

Augusto Morales

2014-06-01

Full Text Available Recent disasters have shown that having clearly defined preventive procedures and decisions is a critical component that minimizes evacuation hazards and ensures a rapid and successful evolution of evacuation plans. In this context, we present our Situation-Aware System for enhancing Evacuation Plans (SASEP system, which allows creating end-user business rules that technically support the specific events, conditions and actions related to evacuation plans. An experimental validation was carried out where 32 people faced a simulated emergency situation, 16 of them using SASEP and the other 16 using a legacy system based on static signs. From the results obtained, we compare both techniques and discuss in which situations SASEP offers a better evacuation route option, confirming that it is highly valuable when there is a threat in the evacuation route. In addition, a study about user satisfaction using both systems is presented showing in which cases the systems are assessed as satisfactory, relevant and not frustrating.

Handling of TRIGA spent fuel at the Medical University of Hanover and its return to the United States

International Nuclear Information System (INIS)

Hampel, Gabriele; Harke, Heinrich; Kelm, Wieland; Klaus, Uwe

2008-01-01

The Medical University of Hannover (MHH) was taking part in the US Department of Energy's (DOE) 'Research Reactor Spent Fuel Acceptance Program' to return its 76 spent TRIGA fuel elements to the United States in the middle of 1999. The fuel elements have been moved to the Idaho National Engineering and Environmental Laboratory (INEEL) in Idaho. This paper describes the technical facilities for handling the fuel elements at the MHH and the various steps in removing the fuel elements from the reactor, transferring them to the transport cask and shipping them to the INEEL. (authors)

Proposal of a Technical Design of the ATLAS Forward Region Shielding

CERN Document Server

Leroy, C; Palla, J; Pospísil, S; Puchmajer, P; Sodomka, J; Stekl, I

2002-01-01

The aim of this note is to present a technical design of the ATLAS forward region. The concept is based on segmented shielding supported by the results of an experiment performed at CERN - PS and Monte Carlo simulations extending these results to ATLAS situation. This concept is translated into a practical engineering design.

Selection and approbation of new technical approaches in innovation projects

International Nuclear Information System (INIS)

Matvienko, V.A.; Pastushenko, V.N.; Zvorykin, K.O.; Zvorykin, L.O.

1999-01-01

Large-scale technical approaches based on the application of new technologies, equipment, tools and other production equipping means (PEM) are to be previously tested by technical and engineering practice and thoroughly approved. These circumstances create objective prerequisites for organization within the infrastructure of the 'OU' of a special sector to solve such a problem. A structure-and-logic model of the infrastructure sector is represented. Principal trends of activities of the proposed new sector of the 'OU' infrastructure may become the following ones: personnel training, skill rising and attestation; adaptation of new samples of universal and auxiliary equipment; new technologies and equipment approbation; approbation of actions in nonstandard situations

WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

J. D. Bigbee

2000-06-21

The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status.

WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

J. D. Bigbee

2000-01-01

The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status

Quinone-induced protein handling changes: Implications for major protein handling systems in quinone-mediated toxicity

International Nuclear Information System (INIS)

Xiong, Rui; Siegel, David; Ross, David

2014-01-01

Para-quinones such as 1,4-Benzoquinone (BQ) and menadione (MD) and ortho-quinones including the oxidation products of catecholamines, are derived from xenobiotics as well as endogenous molecules. The effects of quinones on major protein handling systems in cells; the 20/26S proteasome, the ER stress response, autophagy, chaperone proteins and aggresome formation, have not been investigated in a systematic manner. Both BQ and aminochrome (AC) inhibited proteasomal activity and activated the ER stress response and autophagy in rat dopaminergic N27 cells. AC also induced aggresome formation while MD had little effect on any protein handling systems in N27 cells. The effect of NQO1 on quinone induced protein handling changes and toxicity was examined using N27 cells stably transfected with NQO1 to generate an isogenic NQO1-overexpressing line. NQO1 protected against BQ–induced apoptosis but led to a potentiation of AC- and MD-induced apoptosis. Modulation of quinone-induced apoptosis in N27 and NQO1-overexpressing cells correlated only with changes in the ER stress response and not with changes in other protein handling systems. These data suggested that NQO1 modulated the ER stress response to potentiate toxicity of AC and MD, but protected against BQ toxicity. We further demonstrated that NQO1 mediated reduction to unstable hydroquinones and subsequent redox cycling was important for the activation of the ER stress response and toxicity for both AC and MD. In summary, our data demonstrate that quinone-specific changes in protein handling are evident in N27 cells and the induction of the ER stress response is associated with quinone-mediated toxicity. - Highlights: • Unstable hydroquinones contributed to quinone-induced ER stress and toxicity

Quinone-induced protein handling changes: Implications for major protein handling systems in quinone-mediated toxicity

Energy Technology Data Exchange (ETDEWEB)

Xiong, Rui; Siegel, David; Ross, David, E-mail: david.ross@ucdenver.edu

2014-10-15

Para-quinones such as 1,4-Benzoquinone (BQ) and menadione (MD) and ortho-quinones including the oxidation products of catecholamines, are derived from xenobiotics as well as endogenous molecules. The effects of quinones on major protein handling systems in cells; the 20/26S proteasome, the ER stress response, autophagy, chaperone proteins and aggresome formation, have not been investigated in a systematic manner. Both BQ and aminochrome (AC) inhibited proteasomal activity and activated the ER stress response and autophagy in rat dopaminergic N27 cells. AC also induced aggresome formation while MD had little effect on any protein handling systems in N27 cells. The effect of NQO1 on quinone induced protein handling changes and toxicity was examined using N27 cells stably transfected with NQO1 to generate an isogenic NQO1-overexpressing line. NQO1 protected against BQ–induced apoptosis but led to a potentiation of AC- and MD-induced apoptosis. Modulation of quinone-induced apoptosis in N27 and NQO1-overexpressing cells correlated only with changes in the ER stress response and not with changes in other protein handling systems. These data suggested that NQO1 modulated the ER stress response to potentiate toxicity of AC and MD, but protected against BQ toxicity. We further demonstrated that NQO1 mediated reduction to unstable hydroquinones and subsequent redox cycling was important for the activation of the ER stress response and toxicity for both AC and MD. In summary, our data demonstrate that quinone-specific changes in protein handling are evident in N27 cells and the induction of the ER stress response is associated with quinone-mediated toxicity. - Highlights: • Unstable hydroquinones contributed to quinone-induced ER stress and toxicity.

Handling Kids in Crisis with Care

Science.gov (United States)

Bushinski, Cari

2018-01-01

The Handle with Care program helps schools help students who experience trauma. While at the scene of an event like a domestic violence call, drug raid, or car accident, law enforcement personnel determine the names and school of any children present. They notify that child's school to "handle ___ with care" the next day, and the school…

Survey of tritiated oil sources and handling practices

International Nuclear Information System (INIS)

Miller, J.M.

1994-08-01

Tritium interactions with oil sources (primarily associated with pumps) in tritium-handling facilities can lead to the incorporation of tritium in the oil and the production of tritiated hydrocarbons. This results in a source of radiological hazard and the need for special handling considerations during maintenance, decontamination, decommissioning and waste packaging and storage. The results of a general survey of tritiated-oil sources and their associated characteristics, handling practices, analysis techniques and waste treatment/storage methods are summarized here. Information was obtained from various tritium-handling laboratories, fusion devices, and CANDU plants. 38 refs., 1 fig

Effects of handling on fear reactions in young Icelandic horses

DEFF Research Database (Denmark)

Marsbøll, Anna Feldberg; Christensen, Janne Winther

2015-01-01

To investigate the effect of a short-term standardised handling procedure on reactions of young horses in 2 types of fear tests (including and excluding human handling). Study design An experimental study with 3-year-old Icelandic horses (n = 24). Methods Handled horses (n = 12) were trained according...... to a standardised handling procedure whereas controls (n = 12) remained untrained. Behavioural and heart rate responses in a novel object test and 2 handling fear tests (HFTs) were measured. The HFTs were conducted with both an unknown (HFT-unknown) and a known handler (HFT-known). Results There was no effect...... correlated significantly between tests. Conclusions Previous handling may affect the behavioural fear response of horses when handled by their usual handler, whereas this effect did not apply to an unknown handler. Heart rates appeared unaffected by handling and may be a more reliable indicator...

Situated Transgressiveness

DEFF Research Database (Denmark)

Muhr, Sara Louise; Sullivan, Katie Rose; Rich, Craig

2016-01-01

conversations within queer theory, transgender and organization studies by highlighting how situated contexts mediate the political potential of queer bodies at work. By developing the concept ‘situated transgressiveness’, this article challenges notions of transgender as a stable, ideal disruptive category......This study investigates the lived experience of one transwoman, Claire, a public advocate and a manager with client services responsibilities. We examine Claire's story in order to discuss how situated contexts, such as different roles, locales and interactions, shape the way she experiences...

Handling wood shavings

Energy Technology Data Exchange (ETDEWEB)

1974-09-18

Details of bulk handling equipment suitable for collection and compressing wood waste from commercial joinery works are discussed. The Redler Bin Discharger ensures free flow of chips from storage silo discharge prior to compression into briquettes for use as fuel or processing into chipboard.

Handling of bulk solids theory and practice

CERN Document Server

Shamlou, P A

1990-01-01

Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

Torus sector handling system

International Nuclear Information System (INIS)

Grisham, D.L.

1981-01-01

A remote handling system is proposed for moving a torus sector of the accelerator from under the cryostat to a point where it can be handled by a crane and for the reverse process for a new sector. Equipment recommendations are presented, as well as possible alignment schemes. Some general comments about future remote-handling methods and the present capabilities of existing systems will also be included. The specific task to be addressed is the removal and replacement of a 425 to 450 ton torus sector. This requires a horizontal movement of approx. 10 m from a normal operating position to a point where its further transport can be accomplished by more conventional means (crane or floor transporter). The same horizontal movement is required for reinstallation, but a positional tolerance of 2 cm is required to allow reasonable fit-up for the vacuum seal from the radial frames to the torus sector. Since the sectors are not only heavy but rather tall and narrow, the transport system must provide a safe, stable, and repeatable method fo sector movement. This limited study indicates that the LAMPF-based method of transporting torus sectors offers a proven method of moving heavy items. In addition, the present state of the art in remote equipment is adequate for FED maintenance

Safe Handling of Radioisotopes. 1973 Edition

International Nuclear Information System (INIS)

1973-01-01

Under its Statute the International Atomic Energy Agency is empowered to provide for the application of standards of safety for protection against radiation to its own operations and to operations making use of assistance provided by it or with which it is otherwise directly associated. To this end authorities receiving such assistance are required to observe relevant health and safety measures prescribed by the Agency. As a first step, it was considered an urgent task to provide users of radionuclides with a manual of practice for the safe handling of these substances. The first edition of such a manual was published in 1958 and represented the first of the ''Safety Series'', a series of manuals and codes on health and safety published by the Agency. It was prepared after careful consideration of existing national and international codes of radiation safety by a group of international experts and in consultation with other international bodies. This edition presents the second revision. In response to the suggestion made by some Member States, the term 'radioisotopes' has been changed to 'radionuclides' in the title and, as appropriate, in the text because the term 'radionuclides' includes the radioactive element itself as well as the isotopes. The series of manuals and codes published in the Safety Series and the Technical Reports Series give more complete advice to the user on specialized topics.

Telemedicine for Trauma, Emergencies, and Disaster Management

CERN Document Server

Latifi, Rifat

2010-01-01

Telemedicine has evolved to become an important field of medicine and healthcare, involving everything from simple patient care to actual performance of operations at a distance. This groundbreaking volume addresses the complex technical and clinical development in the management of trauma, disaster, and emergency situations using telemedicine. The book explains how telemedicine and related technologies can be used to effectively handle a wide range of scenarios, from a situation as small as a car crash, to major disasters such as an earthquake. Professionals find critical discussions on the p

Getting to grips with remote handling and robotics

Energy Technology Data Exchange (ETDEWEB)

Mosey, D [Ontario Hydro, Toronto (Canada)

1984-12-01

A report on the Canadian Nuclear Society Conference on robotics and remote handling in the nuclear industry, September 1984. Remote handling in reactor operations, particularly in the Candu reactors is discussed, and the costs and benefits of use of remote handling equipment are considered. Steam generator inspection and repair is an area in which practical application of robotic technology has made a major advance.

Hot Laboratories and Remote Handling

International Nuclear Information System (INIS)

Bart, G.; Blanc, J.Y.; Duwe, R.

2003-01-01

The European Working Group on ' Hot Laboratories and Remote Handling' is firmly established as the major contact forum for the nuclear R and D facilities at the European scale. The yearly plenary meetings intend to: - Exchange experience on analytical methods, their implementation in hot cells, the methodologies used and their application in nuclear research; - Share experience on common infrastructure exploitation matters such as remote handling techniques, safety features, QA-certification, waste handling; - Promote normalization and co-operation, e.g., by looking at mutual complementarities; - Prospect present and future demands from the nuclear industry and to draw strategic conclusions regarding further needs. The 41. plenary meeting was held in CEA Saclay from September 22 to 24, 2003 in the premises and with the technical support of the INSTN (National Institute for Nuclear Science and Technology). The Nuclear Energy Division of CEA sponsored it. The Saclay meeting was divided in three topical oral sessions covering: - Post irradiation examination: new analysis methods and methodologies, small specimen technology, programmes and results; - Hot laboratory infrastructure: decommissioning, refurbishment, waste, safety, nuclear transports; - Prospective research on materials for future applications: innovative fuels (Generation IV, HTR, transmutation, ADS), spallation source materials, and candidate materials for fusion reactor. A poster session was opened to transport companies and laboratory suppliers. The meeting addressed in three sessions the following items: Session 1 - Post Irradiation Examinations. Out of 12 papers (including 1 poster) 7 dealt with surface and solid state micro analysis, another one with an equally complex wet chemical instrumental analytical technique, while the other four papers (including the poster) presented new concepts for digital x-ray image analysis; Session 2 - Hot laboratory infrastructure (including waste theme) which was

From crisis exercises to the management of emergency situations...The experience of a local branch of ASN

International Nuclear Information System (INIS)

Deproit, L.; Vieuble, J.

2016-01-01

The local branch of the ASN (Nuclear Safety Authority) in the Marseille region controls the nuclear activities in 13 departments and Corsica. The preparation of the crisis management relies on the involvement of various actors: representatives of public bodies, nuclear plant operators, the ASN and its technical assistance (IRSN - Institute for Radiation-protection and Nuclear Safety). Crisis exercises are necessary to check the right coordination of all the actors. The feedback of real situations involving incidents are also important because it allows all the actors to better know each other, the case of the accident of the Centraco facility is detailed as well as the robbery of a truck carrying a radioactive source or the discovery of a collection of radioactive sources in a private home. In each case the lesson learned by the local branch of ASN is to communicate quickly with local authorities in order to get the best technical response to the situation and to give authorities all the information necessary for an efficient information of the public. (A.C.)

Handling And Safety Aspects Of Fiber Optic Laser Beam Delivery Systems

Science.gov (United States)

Schonborn, K.-H.; Wodrich, W.

1988-06-01

Using lasers for therapeutic applications is getting more and more accepted. In ophthalmology Ar-lasers for intraocular applications are quite common. The Nd:YAG-laser is used as a high power tool in connection with silica fibers for different extracorporal and intracorporal applications. The CO2-laser is the cutting laser, one problem being the beam transmission: The state of the art in fibers is not sufficient up to now. Because of the high power used safety against laser radiation hazard is of great importance. The safety in laser use is primarily dependent on the surgeons cautiousness, e.g. using laser protection goggels, observing that the spot of the aiming beam is present etc. On the other hand the laser and fiber system has to be inherently safe by appropriate technical means as far as possible. An additional aspect adding to safety is the handling: With easier system handling less attention of the surgeon is necessary for driving the apparatus. Thus he can concentrate on the patient and on the procedure. In considering the fiber system one important point in handling and safety is the coupling of the fiber to the laser head. The development philosophy in this coupling may be divided into two groups: - one is trying to use standard connectors which were initially developed for data transmission; - the other is using special connectors. One example of the first group is the guiding of the laser beam from the Ar-laser to the slit-lamp in ophtalmology. Here the well-known F-SMA connectors together with a special fiber with adapted numerical aperture are used. The advantage of such a system is the low price of the connector. For high power lasers such as the clinical Nd:YAG lasers with 40 to 150 W those connectors are not suitable. Up to now every laser manufacturer developed his own connector system in this field.

Non-POSIX File System for LHCb Online Event Handling

CERN Document Server

Garnier, J C; Cherukuwada, S S

2011-01-01

LHCb aims to use its O(20000) CPU cores in the high level trigger (HLT) and its 120 TB Online storage system for data reprocessing during LHC shutdown periods. These periods can last a few days for technical maintenance or only a few hours during beam interfill gaps. These jobs run on files which are staged in from tape storage to the local storage buffer. The result are again one or more files. Efficient file writing and reading is essential for the performance of the system. Rather than using a traditional shared file-system such as NFS or CIFS we have implemented a custom, light-weight, non-Posix network file-system for the handling of these files. Streaming this file-system for the data-access allows to obtain high performance, while at the same time keep the resource consumption low and add nice features not found in NFS such as high-availability, transparent fail-over of the read and write service. The writing part of this streaming service is in successful use for the Online, real-time writing of the d...

Handling knowledge on osteoporosis - a qualitative study

DEFF Research Database (Denmark)

Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim

2013-01-01

Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...

Redefining NHS complaint handling--the real challenge.

Science.gov (United States)

Seelos, L; Adamson, C

1994-01-01

More and more organizations find that a constructive and open dialogue with their customers can be an effective strategy for building long-term customer relations. In this context, it has been recognized that effective complaint-contact handling can make a significant contribution to organizations' attempts to maximize customer satisfaction and loyalty. Within the NHS, an intellectual awareness exists that effective complaint/contact handling can contribute to making services more efficient and cost-effective by developing customer-oriented improvement initiatives. Recent efforts have focused on redefining NHS complaint-handling procedures to make them more user-friendly and effective for both NHS employees and customers. Discusses the challenges associated with opening up the NHS to customer feedback. Highlights potential weaknesses in the current approach and argues that the real challenge is for NHS managers to facilitate a culture change that moves the NHS away from a long-established defensive complaint handling practice.

Radiation protection programme for emergency exposure situations

International Nuclear Information System (INIS)

Amoah, Peter Atta

2016-04-01

An assessment of the Radiation Protection of Emergency Exposure Situations in Ghana was carried out in relation to documents provided by the International Atomic Energy Agency (IAEA). As realized in the document of the “Method for Developing Arrangements for Response to a Nuclear or Radiological Emergency” of the IAEA, the National Nuclear and Radiological Emergency Response Plan (NNRERP) of Ghana also discusses the Infrastructural and Functional Requirements necessary for the intervention of a nuclear or radiological emergency. The NNRERP describes the concept of operations for a response designed to facilitate the delivery of coordinated assistance to government authorities such as the National Disaster Management Organisation (NADMO), the Radiation Protection Board (RPB) and other participating organizations. From the NNRERP, practices in Ghana, fall into emergency planning category III and IV. As part of the planning measures, one of Ghana Atomic Energy Commission’s primary functions is to provide technical support with a mechanism for timely, interagency coordination of advice and recommendations to NADMO concerning protective actions, environmental concerns, health matters and other related matters. It has been realized from this assessment that there is an urgent need to upgrade infrastructure with logistics for training, exercises and drills to achieve its optimum expectations which will eventually lead to high level of confidence in meeting the standard of a Radiation Protection Programme in Emergency Exposure Situations. (au)

The Effect of Stress, Attitudes, and Behavior on Safety during Animal Handling in Swedish Dairy Farming.

Science.gov (United States)

Lindahl, Cecilia; Pinzke, Stefan; Keeling, Linda J; Lundqvist, Peter

2015-01-01

Working with livestock is a hazardous activity, and animals have been found to be the most frequent injury source on dairy farms. Understanding the risk factors for injury and the causal relationships related to injuries and animal handling is important for developing prevention strategies and effective safety interventions. This study examined stress and handler attitude as possible risk factors for animal handling injuries in dairy farming, in particular when moving cows. Twelve dairy farms were visited on two occasions representing different stress levels: when cows were being moved to milking (low stress) and to hoof trimming (high stress). Behavioral observations of handlers and cows were performed, and questionnaires were completed on attitudes (risk acceptance, safety locus of control, and attitudes toward cows) and stress (perceived stress/energy level and job strain). The injury risks were found to be higher when moving cows to hoof trimming compared with moving cows to milking and gentle, moderately forceful, and forceful interactions were more frequently used. When moving cows to milking, observed risk situations were related only to the perceived energy level of the handler. When moving cows to hoof trimming, injury risks were correlated to job strain and time spent in the risk zone (defined as the area where the handler could be hit by the cow's head or hind legs). The time spent in the risk zone was positively correlated with job strain, age, and experience. Attitudes were not found to have significant impact on safety but were to some extent indirectly involved. These results suggest that the main focus in injury reduction work should be on reducing the time the handler spends in close proximity to animals during aversive procedures and on minimizing cow fear and stress by proper handling techniques and appropriate design of handling facilities.

A Friend in Your Neighborhood: Local Risk Communication in a Technical Writing Classroom

Science.gov (United States)

Rhodes, Lynne

2009-01-01

When examined rhetorically, Savannah River Site Community Preparedness Information calendars from 1994, 2004, and 2008 represent living rhetorical practices aimed at changing the public mind. My technical communication classroom at USC Aiken is uniquely situated for us to examine documents constantly generated by the site's Public Affairs…

Assessing Operational Situations

DEFF Research Database (Denmark)

Zhang, Xinxin

In spite of the high level of automation commonly applied to today’s engineering system, humans’ skill and knowledge still plays a central role in the systems’ daily operation, critical decision making, and accident management. The complexity of the engineered system poses great challenge for human...... operators to perceive and understand the operational situation. The research domain of situation awareness approaches the operational challenges from the human cognition perspective while the presented thesis aims at supporting situation assessment from the system perspective. The thesis has reviewed...... different perspectives on situation awareness in the human factor studies and uses the knowledge reflectively for system representation and analysis. The human cognitive activities during complex plant operation and how they perceive a situation and what kind of knowledge has to be established in the human...

MHSS: a material handling system simulator

Energy Technology Data Exchange (ETDEWEB)

Pomernacki, L.; Hollstien, R.B.

1976-04-07

A Material Handling System Simulator (MHSS) program is described that provides specialized functional blocks for modeling and simulation of nuclear material handling systems. Models of nuclear fuel fabrication plants may be built using functional blocks that simulate material receiving, storage, transport, inventory, processing, and shipping operations as well as the control and reporting tasks of operators or on-line computers. Blocks are also provided that allow the user to observe and gather statistical information on the dynamic behavior of simulated plants over single or replicated runs. Although it is currently being developed for the nuclear materials handling application, MHSS can be adapted to other industries in which material accountability is important. In this paper, emphasis is on the simulation methodology of the MHSS program with application to the nuclear material safeguards problem. (auth)

Development of Safe Food Handling Guidelines for Korean Consumers.

Science.gov (United States)

Kang, Hee-Jin; Lee, Min-Woo; Hwang, In-Kyeong; Kim, Jeong-Weon

2015-08-01

The purpose of this study was to develop guidelines for Korean consumers with regard to safe food handling practices at home by identifying current food handling issues. Korean consumers' behaviors regarding their safe food handling were identified via survey questionnaires that included items on individual hygiene practices, prepreparation steps when cooking, the cooking process, and the storage of leftover foods. The subjects were 417 Korean parents with elementary school children living in Seoul and Gyeonggi Province in the central area of Korea. The survey results revealed gaps between the knowledge or practices of Korean consumers and scientific evidence pertaining to safe food handling practices. Based on these findings, a leaflet on safe food handling guidelines was developed in accordance with Korean food culture. These guidelines suggest personal hygiene practices as well as fundamental principles and procedures for safe food handling from the stage of food purchase to that of keeping leftover dishes. A pilot application study with 50 consumers revealed that the guidelines effectively improved Korean consumers' safe food handling practices, suggesting that they can serve as practical educational material suitable for Korean consumers.

Emergency situations

International Nuclear Information System (INIS)

2007-01-01

The nuclear activities are exercised so as to prevent the accidents. They are subjected to a rule whom application is controlled by the Asn. The risk of grave accident is so limited to a very low level of probability. He cannot be however completely pushed aside. The expression ' radiological emergency situation ' indicates a situation which ensues from an incident or of an accident risking to lead to an emission of radioactive materials or a level of radioactivity susceptible to strike a blow at the public health. The term ' nuclear crisis ' is used for the events which can lead to a radiological emergency situation on a nuclear basic installation or during a transport of radioactive materials. The preparation and the management of emergency situations, that they are of natural, accidental or terrorist origin, became a major concern of our society. We propose you of to know more about it in this file. (N.C.)

Technical and scientific support to nuclear regulatory authority in Montenegro. Present situation and outlooks for the future

International Nuclear Information System (INIS)

Jovanovic, S.

2007-01-01

Nuclear regulatory competences in the Republic of Montenegro are shared between the ministries of health and of the environment. Following the independence of the country by mid 2006, Radiation Protection Commission (RPC) is established within the Ministry of Health, so as to match the regulatory role for the sources used in medicine. A similar step is expected to be made soon within the Ministry of the Environment, too. The two commissions will likely and logically merge into one, representing an interim regulatory authority to be functioning until a full capacity and effectively independent regulatory body is established by new nuclear law. Promulgation of the latter is expected to take part in the course of 2007. Let us mention here that the law in force is one from 1996 - quite obsolete and not taking into consideration the Basic Safety Standards (IAEA, 1996) and subsequent IAEA and EU documents in the field. Montenegro is a small, non-nuclear country (no nuclear installations or fuel cycle segments), the use of radiation sources being limited mostly to medical and industrial applications. Technical support to regulatory functions, in whatever basic form these were effectuated up to now, was/is given by the Centre for Eco-Toxicological Research of Montenegro (CETI), Department of Radiation Protection and Monitoring, in Podgorica. As to scientific support, it is fundamentally to be found at the University of Montenegro, Faculty of Sciences (FS), Department of Physics. While CETI is relatively well equipped, running quite a modern nuclear spectrometry laboratory (alpha, beta and gamma spectrometry, radon measurements) and having a decent dosimetry unit (TLD, field and workplace monitoring), FS is practically limited to sporadic theoretical studies, with very poor laboratory capabilities. Environmental radioactivity monitoring is performed by CETI, following the programme defined by the government. Licensing and inspections are the two regulatory functions still

Technical area status report for waste destruction and stabilization

International Nuclear Information System (INIS)

Dalton, J.D.; Harris, T.L.; DeWitt, L.M.

1993-08-01

The Office of Environmental Restoration and Waste Management (EM) was established by the Department of Energy (DOE) to direct and coordinate waste management and site remediation programs/activities throughout the DOE complex. In order to successfully achieve the goal of properly managing waste and the cleanup of the DOE sites, the EM was divided into five organizations: the Office of Planning and Resource Management (EM-10); the Office of Environmental Quality Assurance and Resource Management (EM-20); the Office of Waste Operations (EM-30); the Office of Environmental Restoration (EM-40); and the Office of Technology and Development (EM-50). The mission of the Office of Technology Development (OTD) is to develop treatment technologies for DOE's operational and environmental restoration wastes where current treatment technologies are inadequate or not available. The Mixed Waste Integrated Program (MWIP) was created by OTD to assist in the development of treatment technologies for the DOE mixed low-level wastes (MLLW). The MWIP has established five Technical Support Groups (TSGs) whose purpose is to identify, evaluate, and develop treatment technologies within five general technical areas representing waste treatment functions from initial waste handling through generation of final waste forms. These TSGs are: (1) Front-End Waste Handling, (2) Physical/Chemical Treatment, (3) Waste Destruction and Stabilization, (4) Second-Stage Destruction and Offgas Treatment, and (5) Final Waste Forms. This report describes the functions of the Waste Destruction and Stabilization (WDS) group. Specifically, the following items are discussed: DOE waste stream identification; summary of previous efforts; summary of WDS treatment technologies; currently funded WDS activities; and recommendations for future activities

Environmental and safety aspects. The best of 'powder handling and processing' 1989 - 1997. 'Bulk solids handling' 1992 - 1997 (H/2000)

Energy Technology Data Exchange (ETDEWEB)

Woehlbier, R.H. (ed.)

2000-07-01

The book contains articles published either during 1992-1997 in ''bulk solids handling'' or during 1989-1997 in ''powder handling and processing''. Main topics are aspects of safety and environmental protection in bulk solids handling: dusts, hazardous powders, prevention and mitigation of dust explosions, powdered coal handling, dedusting, filters, electrostatic precipitation, materials recovery, occupational safety.(uke)

7 CFR 959.126 - Handling of culls.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling of culls. 959.126 Section 959.126 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements...) Handled for canning or freezing. (b) As a safeguard against culls entering fresh market channels each...

Survey of postharvest handling, preservation and processing ...

African Journals Online (AJOL)

Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

Handling uncertainty through adaptiveness in planning approaches

NARCIS (Netherlands)

Zandvoort, M.; Vlist, van der M.J.; Brink, van den A.

2018-01-01

Planners and water managers seek to be adaptive to handle uncertainty through the use of planning approaches. In this paper, we study what type of adaptiveness is proposed and how this may be operationalized in planning approaches to adequately handle different uncertainties. We took a

Ripples and Breaks: Reflecting on Learning Ecologies in Career and Technical Education

Science.gov (United States)

Jocson, Korina M.

2016-01-01

In this paper, the author reflects on a year-long ethnography to point out contextual factors situated in career and technical education (CTE) and specifically how a CTE teacher and a university researcher shaped learning opportunities to support students' interests in the arts, technology, and multimedia communications. The discussion arched by a…

PREPD O and VE remote handling system

International Nuclear Information System (INIS)

Theil, T.N.

1985-01-01

The Process Experimental Pilot Plant (PREPP) at the Idaho National Engineering Laboratory is designed for volume reduction and packaging of transuranic (TRU) waste. The PREPP opening and verification enclosure (O and VE) remote handling system, within that facility, is designed to provide examination of the contents of various TRU waste storage containers. This remote handling system will provide the means of performing a hazardous operation that is currently performed manually. The TeleRobot to be used in this system is a concept that will incorporate and develop man in the loop operation (manual mode), standardized automatic sequencing of end effector tools, increased payload and reach over currently available computer-controlled robots, and remote handling of a hazardous waste operation. The system is designed within limited space constraints and an operation that was originally planned, and is currently being manually performed at other plants. The PREPP O and VE remote handling system design incorporates advancing technology to improve the working environment in the nuclear field

Harvesting and handling agricultural residues for energy

Energy Technology Data Exchange (ETDEWEB)

Jenkins, B.M.; Summer, H.R.

1986-05-01

Significant progress in understanding the needs for design of agricultural residue collection and handling systems has been made but additional research is required. Recommendations are made for research to (a) integrate residue collection and handling systems into general agricultural practices through the development of multi-use equipment and total harvest systems; (b) improve methods for routine evaluation of agricultural residue resources, possibly through remote sensing and image processing; (c) analyze biomass properties to obtain detailed data relevant to engineering design and analysis; (d) evaluate long-term environmental, social, and agronomic impacts of residue collection; (e) develop improved equipment with higher capacities to reduce residue collection and handling costs, with emphasis on optimal design of complete systems including collection, transportation, processing, storage, and utilization; and (f) produce standard forms of biomass fuels or products to enhance material handling and expand biomass markets through improved reliability and automatic control of biomass conversion and other utilization systems. 118 references.

Deadlock handling for real-time control of AGVs at automated container terminals

DEFF Research Database (Denmark)

Lehmann, M.; Grunow, M.; Günther, H.O.

2006-01-01

of individual cranes or AGVs. Particularly, AGVs are liable to deadlocks because they always need a secondary resource, either a quay crane or a stacking crane, to perform the pick-up and drop-off operations. Because usually no buffering of containers takes place at the interfaces between AGVs and cranes......, the consequences of deadlocks are rather severe. Two different methods for the detection of deadlocks are presented. One is based on a matrix representation of the terminal system. The other directly traces the requests for the individual resources. To resolve deadlock situations arising in an automated container...... terminal, three different procedures are proposed. These procedures aim to modify the sequence of handling operations or to assign them to alternative resources so that conflicts between concurrent processes are resolved. The suitability of the concept is demonstrated in an extensive simulation study....

Deadlock handling for real-time control of AGV's at automated container terminals

DEFF Research Database (Denmark)

Lehmann, M.; Grunow, Martin; Günther, H.O.

2007-01-01

of individual cranes or AGVs. Particularly, AGVs are liable to deadlocks because they always need a secondary resource, either a quay crane or a stacking crane, to perform the pick-up and drop-off operations. Because usually no buffering of containers takes place at the interfaces between AGVs and cranes......, the consequences of deadlocks are rather severe. Two different methods for the detection of deadlocks are presented. One is based on a matrix representation of the terminal system. The other directly traces the requests for the individual resources. To resolve deadlock situations arising in an automated container...... terminal, three different procedures are proposed. These procedures aim to modify the sequence of handling operations or to assign them to alternative resources so that conflicts between concurrent processes are resolved. The suitability of the concept is demonstrated in an extensive simulation study....

30 CFR 75.817 - Cable handling and support systems.

Science.gov (United States)

2010-07-01

... High-Voltage Longwalls § 75.817 Cable handling and support systems. Longwall mining equipment must be provided with cable-handling and support systems that are constructed, installed and maintained to minimize... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable handling and support systems. 75.817...

Cooper-Harper Experience Report for Spacecraft Handling Qualities Applications

Science.gov (United States)

Bailey, Randall E.; Jackson, E. Bruce; Bilimoria, Karl D.; Mueller, Eric R.; Frost, Chad R.; Alderete, Thomas S.

2009-01-01

A synopsis of experience from the fixed-wing and rotary-wing aircraft communities in handling qualities development and the use of the Cooper-Harper pilot rating scale is presented as background for spacecraft handling qualities research, development, test, and evaluation (RDT&E). In addition, handling qualities experiences and lessons-learned from previous United States (US) spacecraft developments are reviewed. This report is intended to provide a central location for references, best practices, and lessons-learned to guide current and future spacecraft handling qualities RDT&E.

Cellular Manufacturing System with Dynamic Lot Size Material Handling

Science.gov (United States)

Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

2016-02-01

Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

Waste Handling Shaft concrete liner degradation conclusions and recommendations

International Nuclear Information System (INIS)

1992-10-01

The primary function of the Waste Handling Shaft (WHS) at the Waste Isolation Pilot Plant (WIPP) is to permit the transfer of radioactive waste from the surface waste handling building to the underground storage area. It also serves as an intake shaft for small volumes of air during normal storage operations and as an emergency escape route. Part of the construction was the placement of a concrete liner and steel reinforced key in 1984. During a routine shaft inspection in May 1990, some degradation of the WHS concrete liner was observed between the depths of 800 and 900 feet below the ground surface. Detailed investigations of the liner had been carried out by Sandia National Laboratories and by Westinghouse Electric Corporation Waste Isolation Division (WID) through Lankard Materials Laboratory. Observations, reports, and data support the conclusion that the concrete degradation, resulting from attack by chemically aggressive brine, is a localized phenomena. It is the opinion of the WID that the degradation is not considered an immediate or near term concern; this is supported by technical experts. WID recommendations have been made which, when implemented, will ensure an extended liner life. Based on the current assessment of available data and the proposed shaft liner monitoring program described in this report, it is reasonable to assume that the operational life of the concrete shaft liner can safely support the 25-year life of the WIPP. Analysis of data indicates that degradation of the shaft's concrete liner is attributed to chemically aggressive brine seeping through construction joints and shrinkage cracks from behind the liner in and around the 834-foot depth. Chemical and mechanical components of concrete degradation have been identified. Chemical attack is comprised of several stages of concrete alteration. The other component, mechanical degradation, results from the expansive forces of crystals forming in the concrete pore space

Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

Repository waste-handling operations, 1998

International Nuclear Information System (INIS)

Cottam, A.E.; Connell, L.

1986-04-01

The Civilian Radioactive Waste Management Program Mission Plan and the Generic Requirements for a Mined Geologic Disposal System state that beginning in 1998, commercial spent fuel not exceeding 70,000 metric tons of heavy metal, or a quantity of solidified high-level radioactive waste resulting from the reprocessing of such a quantity of spent fuel, will be shipped to a deep geologic repository for permanent storage. The development of a waste-handling system that can process 3000 metric tons of heavy metal annually will require the adoption of a fully automated approach. The safety and minimum exposure of personnel will be the prime goals of the repository waste handling system. A man-out-of-the-loop approach will be used in all operations including the receipt of spent fuel in shipping casks, the inspection and unloading of the spent fuel into automated hot-cell facilities, the disassembly of spent fuel assemblies, the consolidation of fuel rods, and the packaging of fuel rods into heavy-walled site-specific containers. These containers are designed to contain the radionuclides for up to 1000 years. The ability of a repository to handle more than 6000 pressurized water reactor spent-fuel rods per day on a production basis for approximately a 23-year period will require that a systems approach be adopted that combines space-age technology, robotics, and sophisticated automated computerized equipment. New advanced inspection techniques, maintenance by robots, and safety will be key factors in the design, construction, and licensing of a repository waste-handling facility for 1998

The radiological situation at the atolls of Mururoa and Fangataufa. Technical report. V. 4. Releases to the biosphere of radionuclides from underground nuclear weapon tests at the atolls

International Nuclear Information System (INIS)

1998-08-01

This report is Volume 4 in the series of 6 volumes of the Technical Report on the radiological situation at the atolls of Mururoa and the Fangataufa. It is the second of the three volumes dealing with the evaluation of the long term radiological situation as a consequence of radionuclide migration from underground sources, which is the responsibility of Task Group B. This volume is based on the activities of Working Group 4 and uses, as its primary input on radionuclide inventories the report of Working Group 3, which is Vol. 3 in this series of Technical Report. Nuclear testing in the atmosphere, outer space and under open ocean was prohibited by the Limited Test Ban Treaty of 5 August 1963 and signed by UK, USA and USSR. France ceased atmospheric testing in September 1974. Isolation from the biosphere in geological formations, or containment in geological formations, became the preferred alternative. The explosion of 137 underground nuclear devices in Mururoa and Fangataufa over the testing period 1975-1996, together with 10 safety trials and the burial of radioactively contaminated material gathered from the atoll surfaces, has resulted in a substantial accumulation of radionuclides in the rock beneath the two atolls. Assessment of the rate at which these radionuclides move from the cavities to the environment accessible to humans, or biosphere and the total radionuclide release to the biosphere over time is the central effort of this Study. The rock mass within which the radionuclides are initially deposited, and which serves to contain or delay release of the radionuclides, will be referred to as the geosphere to distinguish it from the biosphere, where the radionuclides would be accessible either directly or through the food chain to the living environment. This assessment of geosphere transport has been divided into the following four interrelated tasks: (a) Geological Pathways; (b) Hydrological Modelling; (c) Solution Source Term; and (d) Geosphere

20 CFR 658.421 - Handling of JS-related complaints.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Handling of JS-related complaints. 658.421... ADMINISTRATIVE PROVISIONS GOVERNING THE JOB SERVICE SYSTEM Job Service Complaint System Federal Js Complaint System § 658.421 Handling of JS-related complaints. (a) No JS-related complaint shall be handled at the...

Fuel handling grapple for nuclear reactor plants

International Nuclear Information System (INIS)

Rousar, D.L.

1992-01-01

This patent describes a fuel handling system for nuclear reactor plants. It comprises: a reactor vessel having an openable top and removable cover and containing therein, submerged in water substantially filling the reactor vessel, a fuel core including a multiplicity of fuel bundles formed of groups of sealed tube elements enclosing fissionable fuel assembled into units, the fuel handling system consisting essentially of the combination of: a fuel bundle handling platform movable over the open top of the reactor vessel; a fuel bundle handling mast extendable downward from the platform with a lower end projecting into the open top reactor vessel to the fuel core submerged in water; a grapple head mounted on the lower end of the mast provided with grapple means comprising complementary hooks which pivot inward toward each other to securely grasp a bail handle of a nuclear reactor fuel bundle and pivot backward away from each other to release a bail handle; the grapple means having a hollow cylindrical support shaft fixed within the grapple head with hollow cylindrical sleeves rotatably mounted and fixed in longitudinal axial position on the support shaft and each sleeve having complementary hooks secured thereto whereby each hook pivots with the rotation of the sleeve secured thereto; and the hollow cylindrical support shaft being provided with complementary orifices on opposite sides of its hollow cylindrical and intermediate to the sleeves mounted thereon whereby the orifices on both sides of the hollow cylindrical support shaft are vertically aligned providing a direct in-line optical viewing path downward there-through and a remote operator positioned above the grapple means can observe from overhead the area immediately below the grapple hooks

Long-term high-level waste technology. Composite quarterly technical report, July-September 1980

International Nuclear Information System (INIS)

Cornman, W.R.

1981-02-01

This composite quarterly technical report summarizes work performed at participating sites to immobilize high-level radioactive wastes. The technical information included in this report is structured along the lines of the Work Breakdown Structure adopted for use in the High-Level Waste Management Technology (WBS) program. The functions and work elements of the WBS are as follows: function 1 - program management and support, which includes work elements of management and budget, environmental and safety assessments, and other support; function 2 - waste preparation, which includes in-situ storage or disposal, waste retrieval, and separation and concentration; function 3 - waste fixation with work elements of waste form development and characterization, and process and equipment development; and function 4 - final handling which includes canister development and characterization, and onsite storage or disposal

Computational Representation of Situation Awareness with Graphical Expressions

International Nuclear Information System (INIS)

Yim, Hobin; Seong, Poonghyun

2013-01-01

Training is also frequently listed in general applications of SA evaluation. Unfortunately, almost of all methods are either subjective or qualitative, and often time consuming. Since the problems indicate, the core matter of using SA in training is the lack of well-developed or robust measurement tools. Therefore, an intuitive and easy handling SA measurement tool for NPP operators was developed based on the Petri-net and Bayesian inference. Measuring SA using Bayesian theory has been controversy, so sets of simulation training conducted by real NPP operators were video recorded for validation of the tool. There have been many attempts to understand cognitive processes in operators. Describing operator's SA is considered as one of the most plausible ways of such endeavors. Operator's cognitive activities in training can be a barometer of operator's unknown behavior in real situations. Knowing what the operator is thinking is important for better results of upcoming training. To give trainers an intuition that how well operators cope with dynamic situations, the quantitative tool to estimate SA named Corsage was proposed. Corsage gives reasonable clues why the operator behaves in a certain way by showing possible changes in a quantitative and graphical manner. Especially, a graphical comparison between referential information processing flow and operator's real information processing flow can offer trainers a detailed insight. In short, despite the incredulous opinion on measuring human cognition with probability, the result showed a positive view of applicability of Bayesian inference to SA measurement. The next step of the research will be improvement in responsiveness to 'rare but important' information

Money handling influences BMI: a survey of cashiers

OpenAIRE

Shraddha Karve; Ketaki Shurpali; Neelesh Dahanukar; Maithili Jog; Milind Watve

2008-01-01

Money is a recent phenomenon in the evolutionary history of man and therefore no separate brain centre to handle money is likely to have evolved. The brain areas activated by food reward and money reward are extensively overlapping. In an experimental set-up, hunger was demonstrated to influence money related decisions and money related thoughts to influence hunger. This suggests that the brain areas evolved for handling food related emotions are exapted to handle money and therefore there co...

Advanced handling-systems with enhanced performance flexibility

International Nuclear Information System (INIS)

1986-04-01

This report describes the results of a project related to future applications and requirements for advanced handling systems. This report consists of six chapters. Following the description of the aims the tools for setting up the requirements for the handling systems including the experience during the data acquisition process is described. Furthermore some information is given about the current state of the art of robotics and manipulators. Of paramount importance are the descriptions of applications and related concepts in the following chapters leading to specific categories of advanced handling units. The paper closes with the description of the first concepts for realization. (orig./HP) [de

How the NWC handles software as product

Energy Technology Data Exchange (ETDEWEB)

Vinson, D.

1997-11-01

This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

Conceptual design of CFETR divertor remote handling compatible structure

International Nuclear Information System (INIS)

Dai, Huaichu; Yao, Damao; Cao, Lei; Zhou, Zibo; Li, Lei

2016-01-01

Highlights: • Conceptual design for the CFETR divertor have been proposed, especially the divertor remote handling compatible structure. • The degrees of freedom of the divertor are analyzed in order to validate the design the divertor supports structure. • Besides the ITER-like scheme, a new scheme for the divertor remote handling compatible supports is proposed, that is the rack and pinion mechanism. • The installation/removel process is verified through simulation in Delmia in order to check design quality for remote handling requirements. - Abstract: Divertor is one of key components of tokamak fusion reactor. The CFETR is China Fusion Engineering Test Reactor. Its divertor will expose to tritium environment and neutron radiation. Materials of the divertor will be radioactived, and cannot be handled by personnel directly. To develop structure which compatible with robots handle for installation, maintenance and removing is required. This paper introduces a conceptual design of CFETR divertor module which compatible with remote handling end-effectors. The divertor module is confined by inner and outer support. The inner support is only confined divertor module radial, toroidal and vertical moving freedom degrees, but not confined rotating freedom degrees. The outer support is the structure that can confine rotating freedom degrees and should also be compatible with remote handling end-effectors.

Conceptual design of CFETR divertor remote handling compatible structure

Energy Technology Data Exchange (ETDEWEB)

Dai, Huaichu, E-mail: yaodm@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); University of Science and Technology of China, Hefei (China); Yao, Damao; Cao, Lei; Zhou, Zibo; Li, Lei [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

2016-11-15

Highlights: • Conceptual design for the CFETR divertor have been proposed, especially the divertor remote handling compatible structure. • The degrees of freedom of the divertor are analyzed in order to validate the design the divertor supports structure. • Besides the ITER-like scheme, a new scheme for the divertor remote handling compatible supports is proposed, that is the rack and pinion mechanism. • The installation/removel process is verified through simulation in Delmia in order to check design quality for remote handling requirements. - Abstract: Divertor is one of key components of tokamak fusion reactor. The CFETR is China Fusion Engineering Test Reactor. Its divertor will expose to tritium environment and neutron radiation. Materials of the divertor will be radioactived, and cannot be handled by personnel directly. To develop structure which compatible with robots handle for installation, maintenance and removing is required. This paper introduces a conceptual design of CFETR divertor module which compatible with remote handling end-effectors. The divertor module is confined by inner and outer support. The inner support is only confined divertor module radial, toroidal and vertical moving freedom degrees, but not confined rotating freedom degrees. The outer support is the structure that can confine rotating freedom degrees and should also be compatible with remote handling end-effectors.

21 CFR 58.107 - Test and control article handling.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

9 CFR 2.131 - Handling of animals.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling of animals. 2.131 Section 2.131 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.131 Handling of animals. (a) All licensees who maintain wild...

ITER L 6 equatorial maintenance duct remote handling study

International Nuclear Information System (INIS)

Millard, J.

1996-09-01

The status and conclusions of a preliminary study of equatorial maintenance duct remote handling is reported. Due to issues with the original duct design a significant portion of the study had to be refocused on equatorial duct layout studies. The study gives an overview of some of the options for design of these ducts and the impact of the design on the equipment to work in the duct. To develop a remote handling concept for creating access through the ducts the following design tasks should be performed: define the operations sequences for equatorial maintenance duct opening and closing; review the remote handling requirements for equatorial maintenance duct opening and closing; design concept for door and pipe handling equipment and to propose preliminary procedures for material handling outsides the duct. 35 figs

A Bit-Encoding Based New Data Structure for Time and Memory Efficient Handling of Spike Times in an Electrophysiological Setup.

Science.gov (United States)

Ljungquist, Bengt; Petersson, Per; Johansson, Anders J; Schouenborg, Jens; Garwicz, Martin

2018-04-01

Recent neuroscientific and technical developments of brain machine interfaces have put increasing demands on neuroinformatic databases and data handling software, especially when managing data in real time from large numbers of neurons. Extrapolating these developments we here set out to construct a scalable software architecture that would enable near-future massive parallel recording, organization and analysis of neurophysiological data on a standard computer. To this end we combined, for the first time in the present context, bit-encoding of spike data with a specific communication format for real time transfer and storage of neuronal data, synchronized by a common time base across all unit sources. We demonstrate that our architecture can simultaneously handle data from more than one million neurons and provide, in real time (based on analysis of previously recorded data. In addition to managing recordings from very large numbers of neurons in real time, it also has the capacity to handle the extensive periods of recording time necessary in certain scientific and clinical applications. Furthermore, the bit-encoding proposed has the additional advantage of allowing an extremely fast analysis of spatiotemporal spike patterns in a large number of neurons. Thus, we conclude that this architecture is well suited to support current and near-future Brain Machine Interface requirements.

Ergonomic design and evaluation of the handle for an endoscopic dissector.

Science.gov (United States)

Shimomura, Yoshihiro; Minowa, Keita; Kawahira, Hiroshi; Katsuura, Tetsuo

2016-05-01

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices. Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.

Single-molecule mechanics of protein-labelled DNA handles

Directory of Open Access Journals (Sweden)

Vivek S. Jadhav

2016-01-01

Full Text Available DNA handles are often used as spacers and linkers in single-molecule experiments to isolate and tether RNAs, proteins, enzymes and ribozymes, amongst other biomolecules, between surface-modified beads for nanomechanical investigations. Custom DNA handles with varying lengths and chemical end-modifications are readily and reliably synthesized en masse, enabling force spectroscopic measurements with well-defined and long-lasting mechanical characteristics under physiological conditions over a large range of applied forces. Although these chemically tagged DNA handles are widely used, their further individual modification with protein receptors is less common and would allow for additional flexibility in grabbing biomolecules for mechanical measurements. In-depth information on reliable protocols for the synthesis of these DNA–protein hybrids and on their mechanical characteristics under varying physiological conditions are lacking in literature. Here, optical tweezers are used to investigate different protein-labelled DNA handles in a microfluidic environment under different physiological conditions. Digoxigenin (DIG-dsDNA-biotin handles of varying sizes (1000, 3034 and 4056 bp were conjugated with streptavidin or neutravidin proteins. The DIG-modified ends of these hybrids were bound to surface-modified polystyrene (anti-DIG beads. Using different physiological buffers, optical force measurements showed consistent mechanical characteristics with long dissociation times. These protein-modified DNA hybrids were also interconnected in situ with other tethered biotinylated DNA molecules. Electron-multiplying CCD (EMCCD imaging control experiments revealed that quantum dot–streptavidin conjugates at the end of DNA handles remain freely accessible. The experiments presented here demonstrate that handles produced with our protein–DNA labelling procedure are excellent candidates for grasping single molecules exposing tags suitable for molecular

45 CFR 650.19 - Electronic invention handling.

Science.gov (United States)

2010-10-01

... Report or a Final Invention Statement and Certification. (b) Questions on use of iEdison and requests for... 45 Public Welfare 3 2010-10-01 2010-10-01 false Electronic invention handling. 650.19 Section 650... PATENTS § 650.19 Electronic invention handling. (a) Grantees must use the iEdison Invention Information...

Preventive maintenance basis: Volume 21 -- HVAC, air handling equipment. Final report

International Nuclear Information System (INIS)

Worledge, D.; Hinchcliffe, G.

1997-12-01

US nuclear plants are implementing preventive maintenance (PM) tasks with little documented basis beyond fundamental vendor information to support the tasks or their intervals. The Preventive Maintenance Basis project provides utilities with the technical basis for PM tasks and task intervals associated with 40 specific components such as valves, electric motors, pumps, and HVAC equipment. This report provides an overview of the PM Basis project and describes use of the PM Basis database. Volume 21 of the report provides a program of PM tasks suitable for application to HVAC-Air Handling Equipment. The PM tasks that are recommended provide a cost-effective way to intercept the causes and mechanisms that lead to degradation and failure. They can be used, in conjunction with material from other sources, to develop a complete PM program or to improve an existing program. Users of this information will be utility managers, supervisors, craft technicians, and training instructors responsible for developing, optimizing, or fine-tuning PM programs

Report on how to handle the recommendations in expert reports and statements of views on the demonstration of the nuclear waste disposal programme. Technical report 08-02

International Nuclear Information System (INIS)

2008-10-01

In the process of evaluating the Opalinus Clay project demonstrating the feasibility of disposing of spent fuel, vitrified high-level waste and long-lived intermediate-level waste in Switzerland, the authorities and their experts made numerous recommendations regarding future procedures and activities to be implemented in the disposal programme. Nagra analysed these reviews and expert opinions and took the recommendations into consideration when preparing its future work programme. In 2006, the Federal Council decided that the feasibility of disposing of these waste categories had been demonstrated successfully, but called on the waste producers to prepare a report that systematically addresses the open questions and recommendations and shows how these will be dealt with in a timely and technically appropriate manner. In the present report, Nagra fulfils this requirement on behalf of the waste producers. The report sets out the recommendations made by the authorities and explains how they will be handled. In many cases, the work required has already begun; in other cases plans are already in place. To facilitate the discussion in the report, the recommendations and the responses of Nagra in each case are divided into topical areas. The main part of the report provides a summary discussion, which also addresses time-related aspects of implementing the recommendations. An appendix to the report provides a detailed overview, in the form of a table, of all the recommendations and the associated responses of Nagra. (author)

The use of a checklist improves anaesthesiologists' technical and non-technical performance for simulated malignant hyperthermia management.

Science.gov (United States)

Hardy, Jean-Baptiste; Gouin, Antoine; Damm, Cédric; Compère, Vincent; Veber, Benoît; Dureuil, Bertrand

2018-02-01

Anaesthesiologists may occasionally manage life-threatening operating room (OR) emergencies. Managing OR emergencies implies real-time analysis of often complicated situations, prompt medical knowledge retrieval, coordinated teamwork and effective decision making in stressful settings. Checklists are recommended to improve performance and reduce the risk of medical errors. This study aimed to assess the usefulness of the French Society of Anaesthesia and Intensive Care's (SFAR) "Malignant Hyperthermia" (MH) checklist on a simulated episode of MH crisis and management thereof by registered anesthesiologists. Twenty-four anaesthesiologists were allocated to 2 groups (checklist and control). Their technical performance in adherence with the SFAR guidelines was assessed by a 30-point score and their non-technical performance was assessed by the Anaesthetists' Non-Technical Skills (ANTS) score. Every task completion was assessed independently. Data are shown as median (first-third quartiles). Anaesthesiologists in the checklist group had higher technical performance scores (24/30 (21.5-25) vs 18/30 (15.5-19.5), P=0.002) and ANTS scores (56.5/60 (47.5-58) vs 48.5/60 (41-50.5), P=0.024). They administered the complete initial dose of dantrolene (2mg/kg) more quickly (15.7 minutes [13.9-18.3] vs 22.4 minutes [18.6-25]) than the control group (P=0.017). However, anaesthesiologists deemed the usability of the checklist to be perfectible. Registered anaesthesiologists' use of the MH checklist during a simulation session widely improved their adherence to guidelines and non-technical skills. This study strongly suggests the benefit of checklist tools for emergency management. Notwithstanding, better awareness and training for anaesthesiologists could further improve the use of this tool. Copyright © 2017 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Situational Method Engineering

OpenAIRE

Henderson-Sellers, Brian; Ralyte, Jolita; Par, Agerfalk; Rossi, Matti

2014-01-01

While previously available methodologies for software – like those published in the early days of object technology – claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all t...

The influence of situation awareness training on nurses' confidence about patient safety skills: A prospective cohort study.

Science.gov (United States)

Stomski, Norman; Gluyas, Heather; Andrus, Prue; Williams, Anne; Hopkins, Martin; Walters, Jennifer; Sandy, Martinique; Morrison, Paul

2018-04-01

Several studies report that patient safety skills, especially non-technical skills, receive scant attention in nursing curricula. Hence, there is a compelling reason to incorporate material that enhances non-technical skills, such as situation awareness, in nursing curricula in order to assist in the reduction of healthcare related adverse events. The objectives of this study were to: 1) understand final year nursing students' confidence in their patient safety skills; and 2) examine the impact of situation awareness training on final year nursing students' confidence in their patient safety skills. Participants were enrolled from a convenience sample comprising final year nursing students at a Western Australia university. Self-reported confidence in patient safety skills was assessed with the Health Professional in Patient Safety Survey before and after the delivery of a situation awareness educational intervention. Pre/post educational intervention differences were examined by repeated measures ANOVA. No significant differences in confidence about patient safety skills were identified within settings (class/clinical). However, confidence in patient safety skills significantly decreased between settings i.e. nursing students lost confidence after clinical placements. The educational intervention delivered in this study did not seem to improve confidence in patient safety skills, but substantial ceiling effects may have confounded the identification of such improvement. Further studies are required to establish whether the findings of this study can be generalised to other university nursing cohorts. Copyright © 2018 Elsevier Ltd. All rights reserved.

Regulatory process for material handling equipment

International Nuclear Information System (INIS)

Rajendran, S.; Agarwal, Kailash

2017-01-01

Atomic Energy (Factories) Rules (AEFR) 1996, Rule 35 states, 'Thorough inspection and load testing of a Crane shall be done by a Competent Person at least once every 12 months'. To adhere to this rule, BARC Safety Council constituted 'Material Handling Equipment Committee (MHEC)' under the aegis of Conventional Fire and Safety Review Committee (CFSRC) to carry out periodical inspection and certification of Material Handling Equipment (MHE), tools and tackles used in BARC Facilities at Trombay, Tarapur and Kalpakkam

Testing of FFTF fuel handling equipment

International Nuclear Information System (INIS)

Coleman, D.W.; Grazzini, E.D.; Hill, L.F.

1977-07-01

The Fast Flux Test Facility has several manual/computer controlled fuel handling machines which are exposed to severe environments during plant operation but still must operate reliably when called upon for reactor refueling. The test programs for two such machines--the Closed Loop Ex-Vessel Machine and the In-Vessel Handling Machine--are described. The discussion centers on those areas where design corrections or equipment repairs substantiated the benefits of a test program prior to plant operation

PND fuel handling decontamination: facilities and techniques

International Nuclear Information System (INIS)

Pan, R.Y.

1996-01-01

The use of various decontamination techniques and equipment has become a critical part of Fuel Handling maintenance work at Ontario Hydro's Pickering Nuclear Division. This paper presents an overview of the set up and techniques used for decontamination in the PND Fuel Handling Maintenance Facility and the effectiveness of each. (author). 1 tab., 9 figs

Preparation for commissioning of nuclear plant with reference to British Nuclear Fuels Plc fuel handling plant project

International Nuclear Information System (INIS)

Bamber, D.R.

1987-01-01

The new Fuel Handling Plant at British Nuclear Fuels Sellafield is part of a Pound 550M complex which provides facilities for the receipt, storage and mechanical preparation of both Magnox and A.G.R. fuel. The plant is very large and complex with considerable use of computer based process control systems, providing for physical and nuclear safety. The preparation of such plant for active commissioning necessitates a great many physical checks and technical evaluations in support of its safety case. This paper describes arrangements for plant commissioning checks, against the regulatory framework and explains the physical preparations necessary for their timely accomplishment. (author)

Emergency situation in a medical cyclotron facility

International Nuclear Information System (INIS)

Kumar, Rajeev; Bhat, M.K.; Singh, D.K.; Pthania, B.S.; Pandit, A.G.; Jacob, M.J.

2010-01-01

Full text: Medical cyclotron is a particle accelerator used in producing short lived radioisotopes such as 18 F, 11 C, 15 O, 13 N, 18 F-2 gas etc. Positron Emission Tomography (PET) is a nuclear imaging modality that has rapidly gained favour. 18 F-FDG is the most widely used radiopharmaceutical with a half-life of 109.8 min. Having more than five years experience in this field we face lots of emergency conditions in the medical cyclotron facility. On the basis of harm we have divided in to three categories i.e. Harm of (a) working personnel, (b) Equipment and (c) environment. Radioactive gas leak and Target foil rupture is considered as the major emergency situations during medical cyclotron operations because there is a potential of over exposure to the working personnel. Radiation protection survey of a self-shielded medical cyclotron installation was carried out during normal and emergency conditions. It is found that the induced activity in the target foil increases with its successive usages. Recommendations have also been made to reduce personal exposure while handling the radioactive gas leak and target foil rupture conditions

A multi-component patient-handling intervention improves attitudes and behaviors for safe patient handling and reduces aggression experienced by nursing staff

DEFF Research Database (Denmark)

Risør, Bettina Wulff; Casper, Sven Dalgas; Andersen, Lars L.

2017-01-01

This study evaluated an intervention for patient-handling equipment aimed to improve nursing staffs' use of patient handling equipment and improve their general health, reduce musculoskeletal problems, aggressive episodes, days of absence and work-related accidents. As a controlled before......-after study, questionnaire data were collected at baseline and 12-month follow-up among nursing staff at intervention and control wards at two hospitals. At 12-month follow-up, the intervention group had more positive attitudes towards patient-handling equipment and increased use of specific patient......-handling equipment. In addition, a lower proportion of nursing staff in the intervention group had experienced physically aggressive episodes. No significant change was observed in general health status, musculoskeletal problems, days of absence or work-related accidents. The intervention resulted in more positive...

PND fuel handling decontamination: facilities and techniques

Energy Technology Data Exchange (ETDEWEB)

Pan, R Y [Ontario Hydro, Toronto, ON (Canada)

1997-12-31

The use of various decontamination techniques and equipment has become a critical part of Fuel Handling maintenance work at Ontario Hydro`s Pickering Nuclear Division. This paper presents an overview of the set up and techniques used for decontamination in the PND Fuel Handling Maintenance Facility and the effectiveness of each. (author). 1 tab., 9 figs.

The non-technical skills used by anaesthetic technicians in critical incidents reported to the Australian Incident Monitoring System between 2002 and 2008.

Science.gov (United States)

Rutherford, J S; Flin, R; Irwin, A

2015-07-01

The outcome of critical incidents in the operating theatre has been shown to be influenced by the behaviour of anaesthetic technicians (ATs) assisting anaesthetists, but the specific non-technical skills involved have not been described. We performed a review of critical incidents (n=1433) reported to the Australian Incident Monitoring System between 2002 and 2008 to identify which non-technical skills were used by ATs. The reports were assessed if they mentioned anaesthetic assistance or had the boxes ticked to identify "inadequate assistance" or "absent supervision or assistance". A total of 90 critical incidents involving ATs were retrieved, 69 of which described their use of non-technical skills. In 20 reports, the ATs ameliorated the critical incident, whilst in 46 they exacerbated the critical incident, and three cases had both positive and negative non-technical skills described. Situation awareness was identified in 39 reports, task management in 23, teamwork in 21 and decision-making in two, but there were no descriptions of issues related to leadership, stress or fatigue management. Situation awareness, task management and teamwork appear to be important non-technical skills for ATs in the development or management of critical incidents in the operating theatre. This analysis has been used to support the development of a non-technical skills taxonomy for anaesthetic assistants.

Experience of safety and performance improvement for fuel handling equipment

International Nuclear Information System (INIS)

Gyoon Chang, Sang; Hee Lee, Dae

2014-01-01

The purpose of this study is to provide experience of safety and performance improvement of fuel handling equipment for nuclear power plants in Korea. The fuel handling equipment, which is used as an important part of critical processes during the refueling outage, has been improved to enhance safety and to optimize fuel handling procedures. Results of data measured during the fuel reloading are incorporated into design changes. The safety and performance improvement for fuel handling equipment could be achieved by simply modifying the components and improving the interlock system. The experience provided in this study can be useful lessons for further improvement of the fuel handling equipment. (authors)

Tasks related to increase of RA reactor exploitation and experimental potential, 01. Designing the protection chamber in the RA reactor hall for handling the radioactive experimental equipment (I-II) Part II, Vol. II

International Nuclear Information System (INIS)

Pavicevic, M.

1963-07-01

This second volume of the project for construction of the protection chamber in the RA reactor hall for handling the radioactive devices includes the technical description of the chamber, calculation of the shielding wall thickness, bottom lead plate, horizontal stability of the chamber, cost estimation, and the engineering drawings

Neonatal handling induces anovulatory estrous cycles in rats

Directory of Open Access Journals (Sweden)

Gomes C.M.

1999-01-01

Full Text Available Since previous work has shown that stimulation early in life decreases sexual receptiveness as measured by the female lordosis quotient, we suggested that neonatal handling could affect the function of the hypothalamus-pituitary-gonadal axis. The effects of neonatal handling on the estrous cycle and ovulation were analyzed in adult rats. Two groups of animals were studied: intact (no manipulation, N = 10 and handled (N = 11. Pups were either handled daily for 1 min during the first 10 days of life or left undisturbed. At the age of 90 days, a vaginal smear was collected daily at 9:00 a.m. and analyzed for 29 days; at 9:00 a.m. on the day of estrus, animals were anesthetized with thiopental (40 mg/kg, ip, the ovaries were removed and the oviduct was dissected and squashed between 2 glass slides. The number of oocytes of both oviductal ampullae was counted under the microscope. The average numbers for each phase of the cycle (diestrus I, diestrus II, proestrus and estrus during the period analyzed were compared between the two groups. There were no significant differences between intact and handled females during any of the phases. However, the number of handled females that showed anovulatory cycles (8 out of 11 was significantly higher than in the intact group (none out of 10. Neonatal stimulation may affect not only the hypothalamus-pituitary-adrenal axis, as previously demonstrated, but also the hypothalamus-pituitary-gonadal axis in female rats.

Effective Teaching Practices in Handling Non Readers

Directory of Open Access Journals (Sweden)

Jacklyn S. Dacalos

2016-08-01

Full Text Available The study determined the effective teaching practices in handling nonreaders. This seeks to answer the following objectives: describe the adjustments, effective strategies, and scaffolds utilized by teachers in handling nonreaders; differentiate the teachers’ reading adjustments, strategies and scaffolds in teaching nonreaders; analyze the teaching reading efficiency of nonreaders using effective teaching reading strategies; and find significant correlation of nonreaders’ grades and reading teachers’ reading adjustments, strategies and scaffolds. This study utilized mixed methods of research. Case studies of five public schools teachers were selected as primary subjects, who were interviewed in handling nonreaders in the areas of adjustments, strategies, and reading scaffolds. Actual teaching observation was conducted according to the five subjects’ most convenient time. In ascertaining the nonreaders’ academic performance, the students’ grades in English subject was analyzed using T-Test within subject design. Handling nonreaders in order to read and understand better in the lesson is an arduous act, yet; once done with effectiveness and passion, it yielded a great amount of learning success. Effective teaching practices in handling nonreaders comprised the use of teachers’ adjustments, strategies, and scaffolds to establish reading mastery, exposing them to letter sounds, short stories, and the use of follow-up. WH questions enhanced their reading performance significantly. Variations of reading teachers’ nature as: an enabler, a facilitator, a humanist, a behaviorist, and an expert, as regards to their teaching practices, were proven significant to students’ reading effectiveness.

Human factors issues in fuel handling

International Nuclear Information System (INIS)

Beattie, J.D.; Iwasa-Madge, K.M.; Tucker, D.A.

1994-01-01

The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro's Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment

Meta-Analysis as a Choice to Improve Research in Career and Technical Education

Science.gov (United States)

Gordon, Howard R. D.; McClain, Clifford R.; Kim, Yeonsoo; Maldonado, Cecilia

2010-01-01

A search of the ERIC and Academic Search Premier data bases, and a comprehensive review of literature suggest that meta-analysis is ignored by career and technical education (CTE) researchers, a situation that is regrettable but remediable. The purpose of this theoretical paper is to provide CTE researchers and consumers with procedures for…

Development of high intensity beam handling system, 4

International Nuclear Information System (INIS)

Yamanoi, Yutaka; Tanaka, Kazuhiro; Minakawa, Michifumi

1992-01-01

We have constructed the new counter experimental hall at the KEK 12 GeV Proton Synchrotron (KEK-PS) in order to handle high intensity primary proton beams of up to 1x10 3 pps (protons per second), which is one order of magnitude greater than the present beam intensity of the KEK-PS, 1x10 12 pps. New technologies for handling high-intensity beams have, then, been developed and employed in the construction of the new hall. A part of our R/D work on handling high intensity beams will be reported. (author)

Studies of safety and critical work situations in nuclear power plants: A human factors perspective

International Nuclear Information System (INIS)

Jacobsson Kecklund, L.

1998-05-01

The purpose of this thesis was to develop and apply different approaches for analyzing safety in critical work situations in real work settings in nuclear power plants, and also to identify safety enhancing measures by using the framework of interaction between human, organizational and technical subsystems. A Cognitive Psychology as well as a Stress Psychology framework was used. All studies were related to the annual outage operational state where the need for coping with many infrequent tasks, often carried out under high time pressure, puts great strain on the staff and organisation of the plant. In three studies the natural variations in the plant state, normal operation and annual outage operation, were used to explore human performance, work-related factors as well as coping and the operators' own resources and the relationship between them. In the annual outage condition high work demands, decreased sleepiness at night shift, more errors and less satisfaction with work performance quality was reported by maintenance as well as by control room operators. A relationship between high work demands and more organizational problems and reports of more frequent human errors and lower satisfactions with work performance quality was also identified in the annual outage condition. Moreover, a relationship between increased sleepiness during night shift, more frequent use of coping strategies and a higher frequency of human errors was reported. In two studies the Event and Barrier Function Model was applied to analyze the safety of barrier function systems inserted into work process sequences to protect the systems from the negative consequences of failures and errors. The model was also used to assess safety in relation to a technical and organizational change. The last study addressed changes in work performance and work-related factors in relation to a technical and organizational change of a safety significant work process involving increased automation and new

The radiological protection in technical-professional level in Mexico

International Nuclear Information System (INIS)

Vizuet Gonzalez, Jorge; Suarez, Gerardo

2005-01-01

This work describes the work done in the implementation of an educational project which aims the formation of technical-professional in radiation protection (RP) with official recognition in Mexico. The constant growth of business activities related to the use of radioactive material in industry, medicine and research has required the development and implementation of standardization by the regulatory authorities of our country. However the advance with regards to training of specialized personnel is reduced in comparison to current needs. in our country there is no technical personnel with studies recognised by the regulatory body in this specialty (RP), however quality assurance programs currently require an educational training that will help to meet the standards in the various activities that develop in the use and handling of sources and ionizing radiation generating equipment, reason why it was developed and implemented this educational project. Additionally induce and promote the need for the peaceful use of nuclear energy and ionizing radiation, at the national level is one more reason to implement the programme at upper secondary level, with the purpose to have knowledge related to the topic. The technical course has a duration of six semesters (three years), and currently there are two generations of graduating. The plan of study consists of the required disciplines for upper secondary level more plus those corresponding to technological training in radiological protection

A case study on determining air monitoring requirements in a radioactive materials handling area

International Nuclear Information System (INIS)

Newton, G.J.; Bechtold, W.E.; Hoover, M.D.; Ghanbari, F.; Herring, P.S.; Jow, Hong-Nian

1993-01-01

A technical, defensible basis for the number and placement of air sampling instruments in a radioactive materials handling facility was developed. Historical air sampling data, process and physicochemical knowledge, qualitative smoke dispersion studies with video documentation, and quantitative trace gas dispersion studies were used to develop a strategy for number and placement of air samplers. These approaches can be used in other facilities to provide a basis for operational decisions. The requirements for retrospective sampling, personal sampling, and real-time monitoring are included. Other relevant operational decisions include selecting the numbers, placement, and appropriate sampling rates for instruments, identifying areas of stagnation or recirculation, and determining the adequacy and efficiency of any sampling transport lines. Justification is presented for using a graded approach to characterizing the workplace and determining air sampling and monitoring needs

The Agency's technical co-operation activities in 1985. Report by the Director General

International Nuclear Information System (INIS)

1986-08-01

balance was a source of concern; this situation has now been brought under control. Expert component implementation increased further. With regard to the TACF, the expert component accounted for most of the year-end earmarkings in previous years, but in 1985 it accounted for only A3.8%, on a par with the percentage of the earmarkings for equipment. During the period 1981-85, there was a 93% increase in the number of purchase orders processed by the Field Procurement Section and a 63% increase in the volume of equipment purchased. During the same period, the number of experts recruited rose by 158% and that of expert assignments by 214%. The number of fellows increased by 7% and that of visiting scientists by 506%. Also, the number of training courses doubled, the number of participants increasing by 86%. From 1980 to 1985 the total volume of technical assistance delivered by the Agency increased by 79%; during the same period, expenditures under the Regular Budget for technical co-operation servicing grew by 18%. The Secretariat is examining how it can best handle the future increases which it expects in the total volume of Agency technical assistance within a frame of severe Regular Budget constraints. The Evaluation Section is playing an important role in Agency efforts to enhance the effectiveness of the technical co-operation programme. Over 500 interim implementation reports were completed in 1985, and 50 mid-project and end-of-project evaluations were conducted. Two evaluations of major processes (equipment provision and group training) were also carried out

[Ageing and work: technical standards].

Science.gov (United States)

De Vito, G; Riva, M A; Meroni, R; Cesana, G C

2010-01-01

Over the last few years, studies on the relationship between ageing and work have attracted growing interest due to the increased probability among workers of developing major health problems as a consequence of ageing of the working population. Negative outcomes for health are possible when an age-related imbalance appears between physical workload and physical work capacity. Interventions based on workload reductions should help to keep workers on the job for as long as allowed by law. Reference masses by age and sex are suggested by the technical standards of the ISO 11228 series, which are also quoted by Italian law D.Lgs. 81/2008, and EN 1005 series, which recommend limits valid also for manual material handling, and pushing and pulling. Decreasing low back pain prevalence or recurrence, in an ageing population with high prevalence of back disorders, could be more effective than many other approaches to enhance workers' quality of life and consequently maintain and improve workers' performance.

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

Science.gov (United States)

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

The current situation of personal dose monitoring in Chinese medicine radiation and undamaged detection

International Nuclear Information System (INIS)

Zhang Liangan; Zhang Wenyi; Yuan Shuyu; Song Shijun; Chang Hexin; Sun Kai

1993-01-01

The situation of personal dose monitoring in γ(X) external exposure in China is mainly outlined. Thermoluminescent dosimetry (TLD) was adopted for personal dose measurement of the radiation workers. The computer software and data base for the work have been developed and applied. National intercomparison of TLD, monitoring control of personal dose monitoring in field, and technical training were carried out for quality control. In China, the dominant occupational exposures is X-ray diagnosis and it increases year by year, the highest values is about 22.6%. The highest values of annual collective dose and annual average of individual dose (AAID) are 272.8 man·Sv and 3.21 mSv respectively. This work shows that the fraction of the population receiving high dose is decreased with time rapidly. The situation for whole occupational exposures is also described. (3 tabs.)

Execution Constraint Verification of Exception Handling on UML Sequence Diagrams

NARCIS (Netherlands)

Ciraci, S.; Sözer, Hasan; Aksit, Mehmet; Havinga, W.K.

2011-01-01

Exception handling alters the control flow of the program. As such, errors introduced in exception handling code may influence the overall program in undesired ways. To detect such errors early and thereby decrease the programming costs, it is worthwhile to consider exception handling at design

Technical records as material evidence in criminal proceedings

Directory of Open Access Journals (Sweden)

Fitim Shishani

2017-03-01

Full Text Available Nowadays, with the aid of technical records - recordings (audio, visual or combined audiovisual events and occurrences can be registered in the outside world in detail. The recording enables the creator or anyone who has it in disposal that at any moment of its reproduction, it can be found in detail how the recorded event has happened or how an occurrence seemed at the time of the recording. Among the current formats of technical records are included: photography, filming, magnetic, magnetoscope, and videophone recording etc. (Sahiti & Murati 2016, 295. The possibility provided by the rapid technical development is also of interest to criminal procedure because technical records containing any fact that may be proved in criminal proceedings may serve as a source of knowledge about facts. In other words, they may serve as evidence to establish facts in criminal proceedings. Given the extensive options that technical fact recordings provide, entities that use the aid of various devices from this fi eld, as well as the different purposes of the author of the recording which have led to the case of making the recording, there is a reasonable question of the permission on their use as evidence in criminal proceedings. In Kosovo, the situation is clear in terms of recordings made in the criminal procedure, as Kosovo CCP 1 provides the possibility of photographing, filming, sketching, etc., of the crime scene, audio visual recording etc. examination of persons (defendant, witness, expert or recordings of any action on judicial review.

Reducing nuclear danger through intergovernmental technical exchanges on nuclear materials safety management

International Nuclear Information System (INIS)

Jardine, L.J.; Peddicord, K.L.; Witmer, F.E.; Krumpe, P.F.; Lazarev, L.; Moshkov, M.

1997-01-01

The United States and Russia are dismantling nuclear weapons and generating hundreds of tons of excess plutonium and high enriched uranium fissile nuclear materials that require disposition. The U.S. Department of Energy and Russian Minatom organizations.are planning and implementing safe, secure storage and disposition operations for these materials in numerous facilities. This provides a new opportunity for technical exchanges between Russian and Western scientists that can establish an improved and sustained common safety culture for handling these materials. An initiative that develops and uses personal relationships and joint projects among Russian and Western participants involved in fissile nuclear materials safety management contributes to improving nuclear materials nonproliferation and to making a safer world. Technical exchanges and workshops are being used to systematically identify opportunities in the nuclear fissile materials facilities to improve and ensure the safety of workers, the public, and the environment

Situational method engineering

CERN Document Server

Henderson-Sellers, Brian; Ågerfalk, Pär J; Rossi, Matti

2014-01-01

While previously available methodologies for software ? like those published in the early days of object technology ? claimed to be appropriate for every conceivable project, situational method engineering (SME) acknowledges that most projects typically have individual characteristics and situations. Thus, finding the most effective methodology for a particular project needs specific tailoring to that situation. Such a tailored software development methodology needs to take into account all the bits and pieces needed for an organization to develop software, including the software process, the

International Nuclear Security Situation And China’s Approach

Institute of Scientific and Technical Information of China (English)

Liu Chong

2016-01-01

Since 2010,the three Nuclear Security Summits have made a number of achievements,but the international nuclear security situation is still not relaxed.The rapid development of China’s domestic nuclear facilities and a large amount of nuclear and radioactive materials related to nuclear power,active international nuclear black market in China’s surrounding regions,rather serious domestic and international terrorist threats as well as the emerging technology development bring about new challenges to nuclear security.Facing the complicated and long-term nuclear security situation,China from the perspective of monitoring mechanism,laws and regulations system,technical capability-building and nuclear emergency preparedness,takes a series of effective measures to build the national nuclear security capacity,and strictly fulfills its international obligations,actively participates in upgrading the international nuclear non-proliferation regime and relevant international rules,and actively takes part in the Nuclear Security Summit process,strengthens bilateral cooperation on nuclear security with major countries especially the United States of America,and jointly organizes various training with International Atomic Energy Agency,which has made great contributions to upgrading the global nuclear security level.At the end of the Nuclear Security Summit process,China should continue to strengthen its domestic nuclear security capacity building,and promote the international community to treat the root causes and symptoms,adopt a comprehensive strategy,and work together,effectively prevent and dissolve the nuclear terrorist threats.

Nuclear criticality safety aspects of emergency response at the Los Alamos National Laboratory

International Nuclear Information System (INIS)

Baker, J.S.

2003-01-01

Emergency response at Los Alamos National Laboratory (LANL) is handled through a graded approach depending on the specific emergency situation . LANL maintains a comprehensive capability to respond to events ranging from minor facility events (alerts) through major community events (general emergencies), including criticality accidents . Criticality safety and emergency response apply to all activities involving significant quantities of fissile material at LANL, primarily at Technical Area 18 (TA-18, the Los Alamos Critical Experiments Facility) and Technical Area 55 (TA-55, the Plutonium Facility). This discussion focuses on response to a criticality accident at TA-55; the approach at TA-18 is comparable .

Present situation and proposal for nuclear medicine development

International Nuclear Information System (INIS)

Oliva Gonzalez, Juan P.

2003-01-01

In the present paper, the current situation of the Cuban nuclear medicine, after its introduction in the country in the 40s of the 20 th century and its expansion since 1962 and, particularly, from the installation of the first gamma camera in 1980, is analyzed. Nowadays, there is a total 14 Nuclear Medicine Departments or Services in our country within the National Oncology Networks and national Health System (SNS), which provide medical attention to the population depending on the nuclear equipment available A Program for the medical and technical personnel's training is proposed, as well as for gradual development of nuclear medicine department's (including the installation of gamma cameras, divided into two stages: 2003-2004 and 2005-2006). The prospective results of the proposed program are analyzed, as well as the impact on the populations health