Mo, Huangrui; Zhang, Fan; Cronin, Duane S
2016-01-01
In this paper, a sharp interface immersed boundary method is developed for efficiently and robustly solving flow with arbitrarily irregular and changing geometries. The proposed method employs a three-step prediction-correction flow reconstruction scheme for boundary treatment and enforces Dirichlet, Neumann, Robin, and Cauchy boundary conditions in a straightforward and consistent manner. Numerical experiments concerning flow of two and three space dimensions, stationary and moving objects, convex and concave geometries, no-slip and slip wall boundary conditions are conducted to demonstrate the proposed method.
Marc Brunel
2015-04-01
Full Text Available We present the development of a numerical simulator for digital in-line holography applications. In-line holograms of arbitrarily shaped and arbitrarily located objects are calculated using generalized Huygens-Fresnel integrals. The objects are 2D opaque or phase objects. The optical set-up is described by its optical transfer matrix. A wide variety of optical systems, involving windows, spherical or cylindrical lenses, can thus be taken into account. It makes the simulator applicable for design and description of in situ experiments. We discuss future applications of this simulator for detection of nanoparticles in droplets, or calibration of airborne instruments that detect and measure ice crystals in the atmosphere.
... blood become too low or too high. Some women have irregular periods because their bodies produce too much androgen, which is a hormone that causes increased muscle mass, facial hair, and deepening of the voice in males and ...
James Stewart
1986-01-01
Full Text Available The amalgam of Lp and ℓq consists of those functions for which the sequence of Lp-norms over the intervals [n,n+1 is in ℓq. These spaces (Lp,ℓq have been studied in several recent papers. Here we replace the intervals [n,n+1 by a cover α={In;n∈Z} of the real line consisting of disjoint half-open intervals In each of the form [a,b, and investigate which properties of (Lp,ℓq carry over to these irregular amalgams (Lp,ℓqα. In particular, we study how (Lp,ℓqα varies as p, q, and α vary and determine conditions under which translation is continuous.
Recursively arbitrarily vertex-decomposable suns
Olivier Baudon
2011-01-01
Full Text Available A graph \\(G = (V,E\\ is arbitrarily vertex decomposable if for any sequence \\(\\tau\\ of positive integers adding up to \\(|V|\\, there is a sequence of vertex-disjoint subsets of \\(V\\ whose orders are given by \\(\\tau\\, and which induce connected graphs. The aim of this paper is to study the recursive version of this problem on a special class of graphs called suns. This paper is a complement of [O. Baudon, F. Gilbert, M. Woźniak, Recursively arbitrarily vertex-decomposable graphs, research report, 2010].
Recursively arbitrarily vertex-decomposable graphs
Olivier Baudon
2012-01-01
Full Text Available A graph \\(G = (V;E\\ is arbitrarily vertex decomposable if for any sequence \\(\\tau\\ of positive integers adding up to \\(|V|\\, there is a sequence of vertex-disjoint subsets of \\(V\\ whose orders are given by \\(\\tau\\, and which induce connected graphs. The main aim of this paper is to study the recursive version of this problem. We present a solution for trees, suns, and partially for a class of 2-connected graphs called balloons.
What Causes Menstrual Irregularities?
... Publications What causes menstrual irregularities? Skip sharing on social media links Share this: Page Content Menstrual irregularities can be caused by a variety of conditions, including pregnancy, hormonal imbalances, infections, malignancies, diseases, trauma, and certain ...
Arbitrarily shaped scatterer by moment method
Shu, Yongze; Ma, Feng
1988-12-01
The calculation of radar cross section (RCS) for an arbitrarily shaped and perfectly conducting scatterer with small electric size has been studied by moment method. The starting point of this paper is the reaction integral equation (RIE). Polygonal plates are used to construct models of realistic structures and to segment every plate into modes automatically. Overlap modes can be obtained between the connecting intersecting plates. The piecewise-sinusoidal modes have been chosen as expansion and testing functions. From RIE, the matrix equation IZ = V can be derived. The scattering field and RCS of the scatterer can be obtained. The method has advantages of simplicity and flexibility of input, versatility, and accuracy. The calculating results of RCS for a few scatterers with different shapes, including a realistic rocket, have been given. The results are in good agreement with those published abroad.
Thermal modeling of bore fields with arbitrarily oriented boreholes
Lazzarotto, Alberto
2016-04-01
The accurate prediction of the thermal behavior of bore fields for shallow geothermal applications is necessary to carry out a proper design of such systems. A classical methodology to perform this analysis is the so-called g-function method. Most commercial tools implementing this methodology are designed to handle only bore fields configurations with vertical boreholes. This is a limitation since this condition might not apply in a real installation. In a recent development by the author, a semi-analytical method to determine g-function for bore fields with arbitrarily oriented boreholes was introduced. The strategy utilized is based on the idea introduced by Cimmino of representing boreholes as stacked finite line sources. The temperature along these finite lines is calculated by applying the superposition of the effects of each linear heat source in the field. This modeling technique allows to approximate uneven heat distribution along the boreholes which is a key feature for the calculation of g-functions according to Eskilson's boundary conditions. The method has been tested for a few simple configurations and showed results that are similar compare to previous results computed numerically by Eskilson. The method has been then successfully applied to the g-function calculation of an existing large scale highly asymmetrical bore field.
Calculation of pressure fields from arbitrarily shaped, apodized, and excited ultrasound transducers
Jensen, Jørgen Arendt; Svendsen, Niels Bruun
1992-01-01
A method for simulation of pulsed pressure fields from arbitrarily shaped, apodized and excited ultrasound transducers is suggested. It relies on the Tupholme-Stepanishen method for calculating pulsed pressure fields, and can also handle the continuous wave and pulse-echo case. The field...... is calculated by dividing the surface into small rectangles and then Summing their response. A fast calculation is obtained by using the far-field approximation. Examples of the accuracy of the approach and actual calculation times are given...
Star Formation in Irregular Galaxies.
Hunter, Deidre; Wolff, Sidney
1985-01-01
Examines mechanisms of how stars are formed in irregular galaxies. Formation in giant irregular galaxies, formation in dwarf irregular galaxies, and comparisons with larger star-forming regions found in spiral galaxies are considered separately. (JN)
The Arbitrarily Varying Multiple-Access Channel with Conferencing Encoders
Wiese, Moritz
2011-01-01
We derive the capacity region of arbitrarily varying multiple-access channels with conferencing encoders for both deterministic and random coding. We obtain a dichotomy: either the channel's deterministic capacity region is zero or it equals the two-dimensional random coding region. We determine exactly when either case holds. We also discuss the benefits of conferencing. For both the compound and the arbitrarily varying cases, we give the example of a channel which does not achieve any non-zero rate pair without encoder cooperation, but the two-dimensional random coding capacity region if conferencing is possible. Unlike compound multiple-access channels, arbitrarily varying multiple-access channels may exhibit a discontinuous increase of the capacity region when conferencing is enabled. We use the arbitrarily varying multiple-access channel with conferencing encoders for an information-theoretic analysis of the performance of wireless networks with cooperating base stations disturbed by exterior interferenc...
Hawking Temperature of an Arbitrarily Accelerating Black Hole
Wei-Zhen Pan; Wei Liu
2014-09-01
Hawking temperature of an arbitrarily accelerating black hole with electric and magnetic charges are obtained based on the Klein–Gordon equation with a correct-dimension new tortoise coordinate transformation.
Consensus of Heterogeneous Multiagent Systems with Arbitrarily Bounded Communication Delay
Xue Li
2017-01-01
Full Text Available This paper focuses on the consensus problem of high-order heterogeneous multiagent systems with arbitrarily bounded communication delays. Through the method of nonnegative matrices, we get a sufficient consensus condition for the systems with dynamically changing topology. The results of this paper show, even when there are arbitrarily bounded communication delays in the systems, all agents can reach a consensus no matter whether there are spanning trees for the corresponding communication graphs at any time.
Exploring arbitrarily high orders of optimized perturbation theory in QCD with nf -> 16.5
Stevenson, P M
2016-01-01
Perturbative QCD with nf flavours of massless quarks becomes simple in the hypothetical limit nf -> 16.5, where the leading beta-function coefficient vanishes. The Banks-Zaks (BZ) expansion in a0=(8/321)(16.5-nf) is straightforward to obtain from perturbative results in MSbar or any renormalization scheme (RS) whose nf dependence is `regular.' However, `irregular' RS's are perfectly permissible and should ultimately lead to the same BZ results. We show here that the `optimal' RS determined by the Principle of Minimal Sensitivity does yield the same BZ-expansion results when all orders of perturbation theory are taken into account. The BZ limit provides an arena for exploring optimized perturbation theory at arbitrarily high orders. These explorations are facilitated by a `master equation' expressing the optimization conditions in the fixed-point limit. We find an intriguing strong/weak coupling duality a -> a*^2/a about the fixed point a*.
Toubøl, Jonas
2012-01-01
Boganmeldelse af Flemming Ibsen, Laust Høgedahl & Steen Sheuer: Kollektiv Handling. Faglig organisering og skift af fagforening. Nyt fra Samfundsvidenskaberne, Frederiksberg, 2012.......Boganmeldelse af Flemming Ibsen, Laust Høgedahl & Steen Sheuer: Kollektiv Handling. Faglig organisering og skift af fagforening. Nyt fra Samfundsvidenskaberne, Frederiksberg, 2012....
Multivariate irregular sampling theorem
无
2009-01-01
In this paper,we prove a Marcinkiewicz-Zygmund type inequality for multivariate entire functions of exponential type with non-equidistant spaced sampling points. And from this result,we establish a multivariate irregular Whittaker-Kotelnikov-Shannon type sampling theorem.
Multivariate irregular sampling theorem
CHEN GuangGui; FANG GenSun
2009-01-01
In this paper, we prove a Marcinkiewicz-Zygmund type inequality for multivariate entire functions of exponential type with non-equidistant spaced sampling points. And from this result, we establish a multivariate irregular Whittaker-Kotelnikov-Shannon type sampling theorem.
Arbitrarily thin metamaterial structure for perfect absorption and giant magnification
Jin, Yi; Xiao, Sanshui; Mortensen, N. Asger
2011-01-01
In our common understanding, for strong absorption or amplification in a slab structure, the desire of reducing the slab thickness seems contradictory to the condition of small loss or gain. In this paper, this common understanding is challenged. It is shown that an arbitrarily thin metamaterial...... layer can perfectly absorb or giantly amplify an incident plane wave at a critical angle when the real parts of the permittivity and permeability of the metamaterial are zero while the absolute imaginary parts can be arbitrarily small. The metamaterial layer needs a totally reflective substrate...
Hawking Radiation via Tunnelling from Arbitrarily Dimensional Schwarzschild Black Holes
REN Jun; ZHAO Zheng; GAO Chang-Jun
2005-01-01
@@ We extend Parikh's recent work to the arbitrarily dimensional Schwarzschild black holes whose Arnowitt-DeserMisner (ADM) mass is identical to its mass parameter. We view Hawking radiation as a tunnelling process across the event horizon. From the tunnelling probability we also find a leading correction to the semiclassical emission rate. The result consists with an underlying unitary theory.
Electromagnetic radiation and motion of arbitrarily shaped particle
Klacka, J
2001-01-01
Covariant form of equation of motion for arbitrarily shaped particle in the electromagnetic radiation field is presented. Equation of motion in the proper frame of the particle uses the radiation pressure cross section 3 $\\times$ 3 matrix. The obtained equation of motion is compared with known result.
Photometric survey of the irregular satellites
Grav, Tommy; Holman, Matthew J.; Gladman, Brett J.; Aksnes, Kaare
2003-11-01
We present BVRI colors of 13 jovian and 8 saturnian irregular satellites obtained with the 2.56 m Nordic Optical Telescope on La Palma, the 6.5 m Magellan Baade Telescope on La Campanas, and the 6.5 m MMT on Mt. Hopkins. The observations were performed from December 2001 to March 2002. The colors of the irregular satellites vary from grey to light red. We have arbitrarily divided the known irregular satellites into two classes based on their colors. One, the grey color class, has similar colors to the C-type asteroids, and the other, the light red color class, has colors similar to P/D-type asteroids. We also find at least one object, the jovian irregular J XXIII Kalyke, that has colors similar to the red colored Centaurs/TNOs, although its classification is insecure. We find that there is a correlation between the physical properties and dynamical properties of the irregular satellites. Most of the dynamical clusters have homogeneous colors, which points to single homogeneous progenitors being cratered or fragmented as the source of each individual cluster. The heterogeneously colored clusters are most easily explained by assuming that there are several dynamical clusters in the area, rather than just one, or that the parent body was a differentiated, heterogeneous body. By analyzing simple cratering/fragmentation scenarios, we show that the heterogeneous colored S IX Phoebe cluster, is most likely two different clusters, a grey colored cluster centered on S IX Phoebe and a light red colored cluster centered on S/2000 S 1. To which of these two clusters the remaining saturnian irregulars with inclinations close to 174° belong is not clear from our analysis, but determination of their colors should help constrain this. We also show through analysis of possible fragmentation and dispersion of the six known uranian irregulars that they most likely make up two clusters, one centered on U XVI Caliban and another centered on U XVII Sycorax. We further show that
Pressure Transient Analysis of Arbitrarily Shaped Fractured Reservoirs
Gao Huimei; He Yingfu; Jiang Hanqiao; Chen Minfeng
2007-01-01
Reservoir boundary shape has a great influence on the transient pressure response of oil wells located in arbitrarily shaped reservoirs.Conventional analytical methods can only be used to calculate transient pressure response in regularly shaped reservoirs.Under the assumption that permeability varies exponentially with pressure drop,a mathematical model for well test interpretation of arbitrarily shaped deformable reservoirs was established.By using the regular perturbation method and the boundary element method,the model could be solved.The pressure behavior of wells with wellbore storage and skin effects was obtained by using the Duhamel principle.The type curves were plotted and analyzed by considering the effects of permeability modulus,arbitrary shape and impermeable region.
Irregular conformal states and spectral curve: Irregular matrix model approach
Rim, Chaiho
2016-01-01
We present recent developments of irregular conformal conformal states. Irregular vertex operators and their adjoint are used to define the irregular conformal states and their Inner product. Free field formalism can be augmented by screening operators which provide more degrees of freedom. The inner product is conveniently given as partition function of a irregular matrix model. (Deformed) spectral curve is the loop equation of the matrix model at Nekrasov-Shatashivili limit. We present the details of analytic structure of the spectral curve for Virasoso symmetry and its extensions, W-symmetry and super-symmetry.
Discrete nonlinear Schrodinger equations with arbitrarily high-order nonlinearities
Khare, A.; Rasmussen, Kim Ø; Salerno, M.
2006-01-01
A class of discrete nonlinear Schrodinger equations with arbitrarily high-order nonlinearities is introduced. These equations are derived from the same Hamiltonian using different Poisson brackets and include as particular cases the saturable discrete nonlinear Schrodinger equation and the Ablowi......-Ladik equation. As a common property, these equations possess three kinds of exact analytical stationary solutions for which the Peierls-Nabarro barrier is zero. Several properties of these solutions, including stability, discrete breathers, and moving solutions, are investigated....
Kerr black holes as particle accelerators to arbitrarily high energy.
Bañados, Máximo; Silk, Joseph; West, Stephen M
2009-09-11
We show that intermediate mass black holes conjectured to be the early precursors of supermassive black holes and surrounded by relic cold dark matter density spikes can act as particle accelerators with collisions, in principle, at arbitrarily high center-of-mass energies in the case of Kerr black holes. While the ejecta from such interactions will be highly redshifted, we may anticipate the possibility of a unique probe of Planck-scale physics.
Bell tests with arbitrarily low photodetection efficiency and homodyne measurements
Araújo, Mateus; Cavalcanti, Daniel; Santos, Marcelo França; Cabello, Adán; Cunha, Marcelo Terra
2011-01-01
We show that hybrid local measurements combining homodyne measurements and photodetection provide violations of a Bell inequality with arbitrarily low photodetection efficiency. This is shown in two different scenarios: when one part receives an atom entangled to the field mode to be measured by the other part and when both parts make similar photonic measurements. Our findings definitely put the hybrid measurement scenario as a strong candidate for the implementation of a loophole-free Bell test.
Irregular marriage: myth and reality
Gordon, Eleanor
2013-01-01
This article examines the historiography, the law, and the practice of irregular marriage in Britain. It argues that there has been a confusion of terms in the historiography of irregular marriage that has served to obscure its meaning, pattern, and incidence. Using evidence from Scotland where irregular marriage continued to be legally valid until 1939 (with one form remaining legally valid until 2006), the article argues that despite its legally valid status, the interpretation of what cons...
Fridrich, Sven; Karmilin, Konstantin; Stöcker, Walter
2016-02-02
Substrate cleavage by metalloproteinases involves nucleophilic attack on the scissile peptide bond by a water molecule that is polarized by a catalytic metal, usually a zinc ion, and a general base, usually the carboxyl group of a glutamic acid side chain. The zinc ion is most often complexed by imidazole nitrogens of histidine side chains. This arrangement suggests that the physiological pH optimum of most metalloproteinases is in the neutral range. In addition to their catalytic metal ion, many metalloproteinases contain additional transition metal or alkaline earth ions, which are structurally important or modulate the catalytic activity. As a consequence, these enzymes are generally sensitive to metal chelators. Moreover, the catalytic metal can be displaced by adventitious metal ions from buffers or biological fluids, which may fundamentally alter the catalytic function. Therefore, handling, purification, and assaying of metalloproteinases require specific precautions to warrant their stability. Copyright © 2016 John Wiley & Sons, Inc.
Exploring arbitrarily high orders of optimized perturbation theory in QCD with nf → 161/2
Stevenson, P. M.
2016-09-01
Perturbative QCD with nf flavours of massless quarks becomes simple in the hypothetical limit nf → 161/2, where the leading β-function coefficient vanishes. The Banks-Zaks (BZ) expansion in a0 ≡8/321 (161/2 -nf) is straightforward to obtain from perturbative results in MS ‾ or any renormalization scheme (RS) whose nf dependence is 'regular'. However, 'irregular' RS's are perfectly permissible and should ultimately lead to the same BZ results. We show here that the 'optimal' RS determined by the Principle of Minimal Sensitivity does yield the same BZ-expansion results when all orders of perturbation theory are taken into account. The BZ limit provides an arena for exploring optimized perturbation theory at arbitrarily high orders. These explorations are facilitated by a 'master equation' expressing the optimization conditions in the fixed-point limit. We find an intriguing strong/weak coupling duality a →a*2 / a about the fixed point a*.
Carrier recovery systems for arbitrarily mapped APK signals
Matsuo, Y.; Namiki, J.
1982-10-01
This paper introduces new carrier recovery techniques for general amplitude-phase keying (APK) modulation signals. The APK's include not only normal QAM but also arbitrarily mapped APK's, including an unsymmetrical APK. Difficulty in phase error detection due to signal mapping complexity, undesirable stable-lock point existence, and the contradiction between a fast acquisition and an accurate steady state performance can be overcome. For that purpose, an acquisition mode and a steady-state mode are used. Furthermore, read-only memories (ROM) are used for recognizing various system states. Random sampling controlled PLL noise performance and acquisition mode carrier recovery circuit pull-in performance with hysteresis property was obtained.
Scattering of arbitrarily shaped beam by a chiral object
Wang, Wenjie; Sun, Yufa; Zhang, Huayong
2017-02-01
An exact semi-analytical solution to the arbitrarily shaped beam scattering by a chiral object is proposed through expanding the scattered and internal fields in terms of appropriate spherical vector wave functions. By using the boundary conditions and the method of moments technique, the unknown expansion coefficients are determined. For incidence of a Gaussian beam, zero-order Bessel beam and Hertzian electric dipole radiation, numerical results of the normalized differential scattering cross section are given to a chiral spheroid and a chiral circular cylinder of finite length, and the scattering characteristics are discussed concisely.
A finite crack with arbitrarily varied surface piezoelectricity
Xu, Yang; Wang, Xu
2017-01-01
We study the contribution of arbitrarily varied surface piezoelectricity to the anti-plane deformation and in-plane electric fields of a hexagonal piezoelectric material containing a finite crack. The varied surface piezoelectricity is incorporated by using an extended version of the continuum-based surface/interface model of Gurtin and Murdoch. In our discussion, the surface properties, including the surface elastic stiffness, the surface piezoelectric modulus and the surface dielectric permittivity, are assumed to be varied arbitrarily along the crack surfaces. By using the Green’s function method, the original boundary value problem is reduced to a system of two coupled first-order Cauchy singular integro-differential equations. Through a diagonalization strategy, the coupled system is transformed into two independent singular integro-differential equations, each of which can be numerically solved by using the collocation method. Our results indicate that the variation of the surface electroelastic moduli exerts a significant influence on the crack opening displacement, the electric potential jump across the crack faces and on the strengths of the logarithmic singularity in stresses and electric displacements at the crack tips.
Decoding Complexity of Irregular LDGM-LDPC Codes Over the BISOM Channels
Raina, Manik
2010-01-01
An irregular LDGM-LDPC code is studied as a sub-code of an LDPC code with some randomly \\emph{punctured} output-bits. It is shown that the LDGM-LDPC codes achieve rates arbitrarily close to the channel-capacity of the binary-input symmetric-output memoryless (BISOM) channel with bounded \\emph{complexity}. The measure of complexity is the average-degree (per information-bit) of the check-nodes for the factor-graph of the code. A lower-bound on the average degree of the check-nodes of the irregular LDGM-LDPC codes is obtained. The bound does not depend on the decoder used at the receiver. The stability condition for decoding the irregular LDGM-LDPC codes over the binary-erasure channel (BEC) under iterative-decoding with message-passing is described.
Evaluating transport in irregular pore networks
Klimenko, Dimitri A; Klimenko, Alexander Y; 10.1103/PhysRevE.86.011112
2012-01-01
A general approach for investigating transport phenomena in porous media is presented. This approach has the capacity to represent various kinds of irregularity in porous media without the need for excessive detail or computational effort. The overall method combines a generalized Effective Medium Approximation (EMA) with a macroscopic continuum model in order to derive a transport equation with explicit analytical expressions for the transport coefficients. The proposed form of the EMA is an anisotropic and heterogeneous extension of Kirkpatrick's EMA [Rev. Mod. Phys. 45, 574 (1973)] which allows the overall model to account for microscopic alterations in connectivity (with the locations of the pores and the orientation and length of the throat) as well as macroscopic variations in transport properties. A comparison to numerical results for randomly generated networks with different properties is given, indicating the potential for this methodology to handle cases that would pose significant difficulties to ...
Irregular-Time Bayesian Networks
Ramati, Michael
2012-01-01
In many fields observations are performed irregularly along time, due to either measurement limitations or lack of a constant immanent rate. While discrete-time Markov models (as Dynamic Bayesian Networks) introduce either inefficient computation or an information loss to reasoning about such processes, continuous-time Markov models assume either a discrete state space (as Continuous-Time Bayesian Networks), or a flat continuous state space (as stochastic dif- ferential equations). To address these problems, we present a new modeling class called Irregular-Time Bayesian Networks (ITBNs), generalizing Dynamic Bayesian Networks, allowing substantially more compact representations, and increasing the expressivity of the temporal dynamics. In addition, a globally optimal solution is guaranteed when learning temporal systems, provided that they are fully observed at the same irregularly spaced time-points, and a semiparametric subclass of ITBNs is introduced to allow further adaptation to the irregular nature of t...
MIMO Multiple Access Channel with an Arbitrarily Varying Eavesdropper
He, Xiang; Yener, Aylin
2012-01-01
A two-transmitter Gaussian multiple access wiretap channel with multiple antennas at each of the nodes is investigated. The channel matrices at the legitimate terminals are fixed and revealed to all the terminals, whereas the channel matrix of the eavesdropper is arbitrarily varying and only known to the eavesdropper. The secrecy degrees of freedom (s.d.o.f.) region under a strong secrecy constraint is characterized. A transmission scheme that orthogonalizes the transmit signals of the two users at the intended receiver and uses a single-user wiretap code is shown to be sufficient to achieve the s.d.o.f. region. The converse involves establishing an upper bound on a weighted-sum-rate expression. This is accomplished by using induction, where at each step one combines the secrecy and multiple-access constraints associated with an adversary eavesdropping a carefully selected group of sub-channels.
Analysis of irregularly distributed points
Hartelius, Karsten
1996-01-01
The present thesis is on the analysis of irregularly distributed points. The main part of the thesis is concerned with enterpolating and restoration of irregularly distribyted points. The least squares methods of kriging and Kalman filtering and the Bayesian restoration method of iterated...... is described as a robust estimator which may be appled straightfor- wardly to a wide range of point patterns and processes when the correlation structure is known. We give a qualitative and quantitative comparison of kriging, Kalman filter and iterated conditional modes. The Kalman filter have in a case study...... and represents an interesting contextuel classifier. Extended Kalman filtering on the other hand seems to be well suited for interpolation in gradually changing environments. Bayesian restoration is applied to a point matching problem, which consists of matching a grid to an image of (irregularly) distributed...
Lexical Semantics and Irregular Inflection
Huang, Yi Ting; Pinker, Steven
2010-01-01
Whether a word has an irregular inflection does not depend on its sound alone: compare lie-lay (recline) and lie-lied (prevaricate). Theories of morphology, particularly connectionist and symbolic models, disagree on which nonphonological factors are responsible. We test four possibilities: (1) Lexical effects, in which two lemmas differ in whether they specify an irregular form; (2) Semantic effects, in which the semantic features of a word become associated with regular or irregular forms; (3) Morphological structure effects, in which a word with a headless structure (e.g., a verb derived from a noun) blocks access to a stored irregular form; (4) Compositionality effects, in which the stored combination of an irregular word’s meaning (e.g., the verb’s inherent aspect) with the meaning of the inflection (e.g., pastness) doesn’t readily transfer to new senses with different combinations of such meanings. In four experiments, speakers were presented with existing and novel verbs and asked to rate their past-tense forms, semantic similarities, grammatical structure, and aspectual similarities. We found (1) an interaction between semantic and phonological similarity, coinciding with reported strategies of analogizing to known verbs and implicating lexical effects; (2) weak and inconsistent effects of semantic similarity; (3) robust effects of morphological structure, and (4) robust effects of aspectual compositionality. Results are consistent with theories of language that invoke lexical entries and morphological structure, and which differentiate the mode of storage of regular and irregular verbs. They also suggest how psycholinguistic processes have shaped vocabulary structure over history. PMID:21151703
Cartography of irregularly shaped satellites
Batson, R. M.; Edwards, Kathleen
1987-01-01
Irregularly shaped satellites, such as Phobos and Amalthea, do not lend themselves to mapping by conventional methods because mathematical projections of their surfaces fail to convey an accurate visual impression of the landforms, and because large and irregular scale changes make their features difficult to measure on maps. A digital mapping technique has therefore been developed by which maps are compiled from digital topographic and spacecraft image files. The digital file is geometrically transformed as desired for human viewing, either on video screens or on hard copy. Digital files of this kind consist of digital images superimposed on another digital file representing the three-dimensional form of a body.
Li, Xu; Chen, Zhigang; Gong, Jianmin; Taflove, Allen; Backman, Vadim
2004-06-01
Understanding light scattering by nonspherical particles is crucial in modeling the transport of light in realistic structures such as biological tissues. We report the application of novel analytical approaches based on modified Wentzel-Kramers-Brillouin and equiphase-sphere methods that facilitate accurate characterization of light scattering by a wide range of irregularly shaped dielectric particles. We also demonstrate that these approaches have the potential to address the inverse-scattering problem by means of a spectral analysis of the total scattering cross section of arbitrarily shaped particles.
Evolutionary Models of Irregular Warfare
2013-03-01
G. (2010) Decentralize, adapt and cooperate. Nature 465:292-293. Sagarin, R. (2012) Learning From the Octopus : How Secrets from Nature Can Help Us...because the concepts map on to important features of modern irregular warfare. For example, small-scale behaviors are increasingly thought to
Quasi-static relaxation of arbitrarily shaped sessile drops
Iliev, S; Nikolayev, Vadim
2016-01-01
We study a spontaneous relaxation dynamics of arbitrarily shaped liquid drops on solid surfaces in the partial wetting regime. It is assumed that the energy dissipated near the contact line is much larger than that in the bulk of the fluid. We have shown rigorously in the case of quasi-static relaxation using the standard mechanical description of dissipative system dynamics that the introduction of a dissipation term proportional to the contact line length leads to the well known local relation between the contact line velocity and the dynamic contact angle at every point of an arbitrary contact line shape. A numerical code is developed for 3D drops to study the dependence of the relaxation dynamics on the initial drop shape. The available asymptotic solutions are tested against the obtained numerical data. We show how the relaxation at a given point of the contact line is influenced by the dynamics of the whole drop which is a manifestation of the non-local
Array projector design for projection on arbitrarily curved surfaces
Fischer, Stephanie; Schreiber, Peter; Riedel, Alf; Sieler, Marcel
2015-09-01
The micro-optical array projector is a new and innovative possibility to project patterns onto arbitrary shaped surfaces1 . In contrast to single-aperture systems the illuminance of the projected image is raised by only increasing the lateral extent of the projector while keeping the length constant. Thanks to the setup - analogous to a fly's eye condenser - we obtain a very compact design with homogenization of illumination. The images to be projected are presented as arbitrarily curved CAD-objects. Because of its complexity, the first attempt was a chief-ray backtrace implemented into a CAD-program, with the individual projectorlets modelled as pinhole cameras. With this principle one can trace the slides for several applications like the projection on perpendicular, as well as tilted and curved surfaces. Since aberrations cannot be considered with the simple CAD backtrace described above, we used the commercially available raytracer Zemax®, controlled by a macro, working in conjunction with a CADprogram for improved slide mask generation. Despite both methods, depending on the complexity of the optical system, are generating the fundamental mask data, the paper will show that there is a tradeoff between calculation time and accuracy. Based on this evaluation we will discuss further development as well as the possibility of improvement concerning the calculation methods. The different methods were investigated to determine their advantages and disadvantages. This provides the basis for the scope of application. Further we will demonstrate simulations as well as results obtained with built demonstrators.
Roots of Russian Irregular Warfare
2016-12-01
concluded that the United States has a national policy gap in our own ability to wage “unconventional warfare in the gray zone.”3 That statement...advancing army—few have studied the irregular nature of the campaign waged against Napoleon. Napoleon’s overstretched logistics and the elusiveness of...94 Karl E. Meyer and Shareen Blair Brysac, Tournament of Shadows: The Great Game and the Race for Empire in Central Asia (Washington, DC: Basic
Air Power in Irregular Warfare
2012-12-01
Intelligence, Surveillance, and Reconnaisance IW Irregular Warfare JFC Joint Force Commander JP Joint Publication xii MCP Malayan Communist Party...being or acting in accord with laws , rules, or established custom.”5 Combined with the Clausewitzian definition of war as “an act of violence meant...Quarterly and Defence Journal , October, 1920), accessed March 21, 2012, http://usacac.army.mil/cac2/cgsc/carl/download/csipubs/lawrence.pdf, 17. 22 Bruce
Fully automatic segmentation of arbitrarily shaped fiducial markers in cone-beam CT projections
Bertholet, J.; Wan, H.; Toftegaard, J.; Schmidt, M. L.; Chotard, F.; Parikh, P. J.; Poulsen, P. R.
2017-02-01
Radio-opaque fiducial markers of different shapes are often implanted in or near abdominal or thoracic tumors to act as surrogates for the tumor position during radiotherapy. They can be used for real-time treatment adaptation, but this requires a robust, automatic segmentation method able to handle arbitrarily shaped markers in a rotational imaging geometry such as cone-beam computed tomography (CBCT) projection images and intra-treatment images. In this study, we propose a fully automatic dynamic programming (DP) assisted template-based (TB) segmentation method. Based on an initial DP segmentation, the DPTB algorithm generates and uses a 3D marker model to create 2D templates at any projection angle. The 2D templates are used to segment the marker position as the position with highest normalized cross-correlation in a search area centered at the DP segmented position. The accuracy of the DP algorithm and the new DPTB algorithm was quantified as the 2D segmentation error (pixels) compared to a manual ground truth segmentation for 97 markers in the projection images of CBCT scans of 40 patients. Also the fraction of wrong segmentations, defined as 2D errors larger than 5 pixels, was calculated. The mean 2D segmentation error of DP was reduced from 4.1 pixels to 3.0 pixels by DPTB, while the fraction of wrong segmentations was reduced from 17.4% to 6.8%. DPTB allowed rejection of uncertain segmentations as deemed by a low normalized cross-correlation coefficient and contrast-to-noise ratio. For a rejection rate of 9.97%, the sensitivity in detecting wrong segmentations was 67% and the specificity was 94%. The accepted segmentations had a mean segmentation error of 1.8 pixels and 2.5% wrong segmentations.
Evaluating transport in irregular pore networks
Klimenko, Dimitri A.; Hooman, Kamel; Klimenko, Alexander Y.
2012-07-01
A general approach for investigating transport phenomena in porous media is presented. This approach has the capacity to represent various kinds of irregularity in porous media without the need for excessive detail or computational effort. The overall method combines a generalized effective medium approximation (EMA) with a macroscopic continuum model in order to derive a transport equation with explicit analytical expressions for the transport coefficients. The proposed form of the EMA is an anisotropic and heterogeneous extension of Kirkpatrick's EMA [Rev. Mod. Phys.RMPHAT0034-686110.1103/RevModPhys.45.574 45, 574 (1973)] which allows the overall model to account for microscopic alterations in connectivity (with the locations of the pores and the orientation and length of the throat) as well as macroscopic variations in transport properties. A comparison to numerical results for randomly generated networks with different properties is given, indicating the potential for this methodology to handle cases that would pose significant difficulties to many other analytical models.
... this page: //medlineplus.gov/ency/patientinstructions/000444.htm Handling sharps and needles To use the sharing features ... Health Administration. OSHA fact sheet: protecting yourself when handling contaminated sharps. Updated January 2011. Available at: www. ...
V.Ts. Gnuni
2016-03-01
Full Text Available The non-conservative stability problem of pressing beam when two support billeting symmetrical on arbitrarily distance from the end is considered. It is show the possibility statical form loss of stability. The critical loads are determined.
SPS-ALPHA: The First Practical Solar Power Satellite via Arbitrarily Large PHased Array Project
National Aeronautics and Space Administration — SPS-ALPHA (Solar Power Satellite via Arbitrarily Large Phased Array) is a novel, bio-mimetic approach to the challenge of space solar power. If successful, this...
Comparison of correlation analysis techniques for irregularly sampled time series
K. Rehfeld
2011-06-01
Full Text Available Geoscientific measurements often provide time series with irregular time sampling, requiring either data reconstruction (interpolation or sophisticated methods to handle irregular sampling. We compare the linear interpolation technique and different approaches for analyzing the correlation functions and persistence of irregularly sampled time series, as Lomb-Scargle Fourier transformation and kernel-based methods. In a thorough benchmark test we investigate the performance of these techniques.
All methods have comparable root mean square errors (RMSEs for low skewness of the inter-observation time distribution. For high skewness, very irregular data, interpolation bias and RMSE increase strongly. We find a 40 % lower RMSE for the lag-1 autocorrelation function (ACF for the Gaussian kernel method vs. the linear interpolation scheme,in the analysis of highly irregular time series. For the cross correlation function (CCF the RMSE is then lower by 60 %. The application of the Lomb-Scargle technique gave results comparable to the kernel methods for the univariate, but poorer results in the bivariate case. Especially the high-frequency components of the signal, where classical methods show a strong bias in ACF and CCF magnitude, are preserved when using the kernel methods.
We illustrate the performances of interpolation vs. Gaussian kernel method by applying both to paleo-data from four locations, reflecting late Holocene Asian monsoon variability as derived from speleothem δ^{18}O measurements. Cross correlation results are similar for both methods, which we attribute to the long time scales of the common variability. The persistence time (memory is strongly overestimated when using the standard, interpolation-based, approach. Hence, the Gaussian kernel is a reliable and more robust estimator with significant advantages compared to other techniques and suitable for large scale application to paleo-data.
Time-Domain Analysis of a Wire Antenna Near Arbitrarily Shaped Conductor Bodies
Zheng; Li-Zhi; Xiao; Bo-xun; 等
2003-01-01
A time domain electrical field integral equation (TDEFIE) is formulated for the problem of a thin wire antenna in the presence of conductor bodies, and this equation is solved by the method in time marching algorithm. The analysis is valid for any arbitrarily shaped, oriented and positioned wire antennas relative to arbitrarily shaped conductor bodies. Current at the excited point, input admittance and radiation pattern are given and agree with the results computed by the method in frequency domain.
Time-Domain Analysis of a Wire Antenna Near Arbitrarily Shaped Conductor Bodies
Zheng Li-zhi; Xiao Bo-xur; Zhu Guo-qiang; Yang Zi-jie
2003-01-01
A time domain electrical field integral equation (TDEFIE) is formulated for the problem of a thin wire antenna in the presence of conductor bodies, and this equation is solved by the method of time marching algorithm. The analysis is valid for any arbitrarily shaped, oriented and positioned wire antennas relative to arbitrarily shaped conductor bodies. Current at the excited point, input admittance and radiation pattern are given and agree with the results computed by the method in frequency domain.
Lopsidedness in dwarf irregular galaxies
Heller, A B; Almoznino, E; Van Zee, L; Salzer, J J; Heller, Ana B.; Brosch, Noah; Almoznino, Elchanan; Zee, Liese van; Salzer, John J.
2000-01-01
We quantify the amplitude of the lopsidedness, the azimuthal angular asymmetry index, and the concentration of star forming regions, as represented by the distribution of the H$\\alpha$ emission, in a sample of 78 late-type irregular galaxies. We bin the observed galaxies in two groups representing blue compact galaxies (BCDs) and low surface brightness dwarf galaxies (LSBs). The light distribution is analysed with a novel algorithm, which allows detection of details in the light distribution pattern. We find that while the asymmetry of the underlying continuum light, representing the older stellar generations, is relatively small, the H$\\alpha$ emission is very asymmetric and is correlated in position angle with the continuum light. We test a model of random star formation over the extent of a galaxy by simulating HII regions in artificial dwarf galaxies. The implication is that random star formation over the full extent of a galaxy may be generated in LSB dwarf-irregular galaxies but not in BCD galaxies.
LDRD Report: Scheduling Irregular Algorithms
Boman, Erik G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2014-10-01
This LDRD project was a campus exec fellowship to fund (in part) Donald Nguyen’s PhD research at UT-Austin. His work has focused on parallel programming models, and scheduling irregular algorithms on shared-memory systems using the Galois framework. Galois provides a simple but powerful way for users and applications to automatically obtain good parallel performance using certain supported data containers. The naïve user can write serial code, while advanced users can optimize performance by advanced features, such as specifying the scheduling policy. Galois was used to parallelize two sparse matrix reordering schemes: RCM and Sloan. Such reordering is important in high-performance computing to obtain better data locality and thus reduce run times.
Robust ASPNET Exception Handling
Dumond, Lee
2009-01-01
This Wrox Blox will teach you how to unravel the mysteries of exception handling in ASP.NET. First, you'll get a thorough introduction to structured exception handling in the .NET Framework, learn about the Exception class, the related C# language constructs, and how exceptions propagate up the call stack. Then, you'll delve into a variety of practical topics such as: when, where, and how to properly throw, catch, and handle exceptions in your code; how to employ "defensive programming" techniques to avoid triggering the most common CLR exceptions; adopting exception handling "best practices
a Linear Model for Meandering Rivers with Arbitrarily Varying Width
Frascati, A.; Lanzoni, S.
2011-12-01
Alluvial rivers usually exhibit quite complex planforms, characterized by a wide variety of alternating bends, that have attracted the interest of a large number of researchers. Much less attention has been paid to another striking feature observed in alluvial rivers, namely the relatively regular spatial variations attained by the channel width. Actively meandering channels, in fact, generally undergo spatial oscillations systematically correlated with channel curvature, with cross sections wider at bends than at crossings. Some other streams have been observed to exhibit irregular width variations. Conversely, rivers flowing in highly vegetated flood plains, i.e. canaliform rivers, may exhibit an opposite behavior, owing to the combined effects of bank erodibility and floodplain depositional processes which, in turn, are strictly linked to vegetation cover. Similarly to streamline curvatures induced by bends, the presence of along channel width variations may have remarkable effects on the flow field and sediment dynamics and, thereby, on the equilibrium river bed configuration. In particular, spatial distribution of channel curvature typically determines the formation of a rhythmic bar-pool pattern in the channel bed strictly associated with the development of river meanders. Channel width variations are on the contrary characterized by a sequence of narrowing, yielding a central scour, alternated to the downstream development of a widening associated with the formation of a central bar. Here we present a morphodynamic model that predict at a linear level the spatial distribution of the flow field and the equilibrium bed configuration of an alluvial river characterized by arbitrary along channel distributions of both the channel axis curvature and the channel width. The mathematical model is averaged over the depth and describes the steady, non-uniform flow and sediment transport in sinuous channels with a noncohesive bed. The governing two-dimensional equations
The Dynamics of Equatorial F Layer Irregularities.
2014-09-26
of irregularities rise through the ionosphere. The patch, after development, has the form of a banana with its long axis magnetic north-south. A...determine the geometrical form of these irregularities. If the irregularities were vertical sheets the maximum intensity would be noted when the ray path...was along the sheet as shown in Figure 6. Vertical sheets , conceived theoretically from upwelling plasma bubbles, were ruled out. Multiplying factors
Shape-adaptive discrete wavelet transform for coding arbitrarily shaped texture
Li, Shipeng; Li, Weiping
1997-01-01
This paper presents a shape adaptive discrete wavelet transform (SA-DWT) scheme for coding arbitrarily shaped texture. The proposed SA-DWT can be used for object-oriented image coding. The number of coefficients after SA-DWT is identical to the number of pels contained in the arbitrarily shaped image objects. The locality property of wavelet transform and self-similarity among subbands are well preserved throughout this process.For a rectangular region, the SA-DWT is identical to a standard wavelet transform. With SA-DWT, conventional wavelet based coding schemes can be readily extended to the coding of arbitrarily shaped objects. The proposed shape adaptive wavelet transform is not unitary but the small energy increase is restricted at the boundary of objects in subbands. Two approaches of using the SA-DWT algorithm for object-oriented image and video coding are presented. One is to combine scalar SA-DWT with embedded zerotree wavelet (EZW) coding technique, the other is an extension of the normal vector wavelet coding (VWC) technique to arbitrarily shaped objects. Results of applying SA-VWC to real arbitrarily shaped texture coding are also given at the end of this paper.
Henriksen, Kirsten; Alminde, Rikke; Stevnsgaard Andersen, Mona
Social analyse og handling er et redskab beregnet til at inspirere socialarbejdere til at arbejde analytisk, systematisk samt refleksivt med konkrete problemstillinger i socialt arbejde.......Social analyse og handling er et redskab beregnet til at inspirere socialarbejdere til at arbejde analytisk, systematisk samt refleksivt med konkrete problemstillinger i socialt arbejde....
Ræbild, Ulla
area within fashion research. This paper proposes an understanding of the work process of fashion designers as practices of handling comprising a number of embodied methodologies tied to both spatial and temporal dimensions. The term handling encompasses four meanings. As a verb it is literally...... to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...
On Decoding Irregular Tanner Codes
Even, Guy
2011-01-01
We present a new combinatorial characterization for local-optimality of a codeword in irregular Tanner codes. This characterization is a generalization of [Arora, Daskalakis, Steurer; 2009] and [Vontobel; 2010]. The main novelty in this characterization is that it is based on a conical combination of subtrees in the computation trees. These subtrees may have any degree in the local-code nodes and may have any height (even greater than the girth). We prove that local-optimality in this new characterization implies Maximum-Likelihood (ML) optimality and LP-optimality. We also show that it is possible to compute efficiently a certificate for the local-optimality of a codeword given the channel output. We apply this characterization to regular Tanner codes. We prove a lower bound on the noise threshold in channels such as BSC and AWGNC. When the noise is below this lower bound, the probability that LP decoding fails diminishes doubly exponentially in the girth of the Tanner graph. We use local optimality also to ...
Extracting physical properties of arbitrarily shaped laser-doped micro-scale areas in semiconductors
Heinrich, Martin, E-mail: mh@nus.edu.sg [Solar Energy Research Institute of Singapore, National University of Singapore, Singapore, Singapore 117574 (Singapore); NUS Graduate School for Integrative Science and Engineering, National University of Singapore, Singapore, Singapore 117456 (Singapore); Kluska, Sven [Fraunhofer Institute for Solar Energy Systems (ISE), Heidenhofstr. 2, D-79110 Freiburg (Germany); Hameiri, Ziv; Hoex, Bram [Solar Energy Research Institute of Singapore, National University of Singapore, Singapore, Singapore 117574 (Singapore); Aberle, Armin G. [Solar Energy Research Institute of Singapore, National University of Singapore, Singapore, Singapore 117574 (Singapore); Department of Electrical and Computer Engineering, National University of Singapore, Singapore, Singapore 117456 (Singapore)
2013-12-23
We present a method that allows the extraction of relevant physical properties such as sheet resistance and dopant profile from arbitrarily shaped laser-doped micro-scale areas formed in semiconductors with a focused pulsed laser beam. The key feature of the method is to use large laser-doped areas with an identical average number of laser pulses per area (laser pulse density) as the arbitrarily shaped areas. The method is verified using sheet resistance measurements on laser-doped silicon samples. Furthermore, the method is extended to doping with continuous-wave lasers by using the average number of passes per area or density of passes.
Ethical issues in irregular migration research
Duvell, F.; Triandafyllidou, A.; Vollmer, B.
2008-01-01
This paper is concerned with the ethical issues arising for researchers engaged in the study of irregular migration. Irregular migration is by definition an elusive phenomenon as it takes place in violation of the law and at the margins of society. This very nature of the phenomenon raises important
Ethical issues in irregular migration research
Duvell, F.; Triandafyllidou, A.; Vollmer, B.
2008-01-01
This paper is concerned with the ethical issues arising for researchers engaged in the study of irregular migration. Irregular migration is by definition an elusive phenomenon as it takes place in violation of the law and at the margins of society. This very nature of the phenomenon raises important
Capture of Irregular Satellites at Jupiter
Nesvorny, D; Deienno, R
2014-01-01
The irregular satellites of outer planets are thought to have been captured from heliocentric orbits. The exact nature of the capture process, however, remains uncertain. We examine the possibility that irregular satellites were captured from the planetesimal disk during the early Solar System instability when encounters between the outer planets occurred (Nesvorny, Vokrouhlicky & Morbidelli 2007, AJ 133; hereafter NVM07). NVM07 already showed that the irregular satellites of Saturn, Uranus and Neptune were plausibly captured during planetary encounters. Here we find that the current instability models present favorable conditions for capture of irregular satellites at Jupiter as well, mainly because Jupiter undergoes a phase of close encounters with an ice giant. We show that the orbital distribution of bodies captured during planetary encounters provides a good match to the observed distribution of irregular satellites at Jupiter. The capture efficiency for each particle in the original transplanetary d...
CHR -- Character Handling Routines
Charles, A. C.; Rees, P. C. T.; Chipperfield, A. J.; Jenness, T.
This document describes the Character Handling Routine library, CHR, and its use. The CHR library augments the limited character handling facilities provided by the Fortran 77 standard. It offers a range of character handling facilities: from formatting Fortran data types into text strings and the reverse, to higher level functions such as wild card matching, string sorting, paragraph reformatting and justification. The library may be used simply for building text strings for interactive applications or as a basis for more complex text processing applications.
... Child What Kids Say About: Handling Stress Anxiety, Fears, and Phobias Community Service: A Family's Guide to Getting Involved ... With Stress Teens Talk About Stress (Video) Anxiety, Fears, and Phobias Childhood Stress How Can I Help My Child ...
Alnajjar, Mikhail S.; Haynie, Todd O.
2009-08-14
Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.
Al Jarro, Ahmed
2011-09-01
A new predictor-corrector scheme for solving the Volterra integral equation to analyze transient electromagnetic wave interactions with arbitrarily shaped inhomogeneous dielectric bodies is considered. Numerical results demonstrating stability and accuracy of the proposed method are presented. © 2011 IEEE.
Tanev, Stoyan; Sun, Wenbo
2012-01-01
This chapter reviews the fundamental methods and some of the applications of the three-dimensional (3D) finite-difference time-domain (FDTD) technique for the modeling of light scattering by arbitrarily shaped dielectric particles and surfaces. The emphasis is on the details of the FDTD algorithms...
Tanev, Stoyan; Sun, Wenbo
2012-01-01
This chapter reviews the fundamental methods and some of the applications of the three-dimensional (3D) finite-difference time-domain (FDTD) technique for the modeling of light scattering by arbitrarily shaped dielectric particles and surfaces. The emphasis is on the details of the FDTD algorithms...
Comment on "Kerr Black Holes as Particle Accelerators to Arbitrarily High Energy"
Berti, Emanuele; Gualtieri, Leonardo; Pretorius, Frans; Sperhake, Ulrich
2009-01-01
It has been suggested that rotating black holes could serve as particle colliders with arbitrarily high center-of-mass energy. Astrophysical limitations on the maximal spin, back-reaction effects and sensitivity to the initial conditions impose severe limits on the likelihood of such collisions.
Capture of irregular satellites at Jupiter
Nesvorný, David; Vokrouhlický, David; Deienno, Rogerio [Department of Space Studies, Southwest Research Institute, 1050 Walnut Street, Suite 300, Boulder, CO 80302 (United States)
2014-03-20
The irregular satellites of outer planets are thought to have been captured from heliocentric orbits. The exact nature of the capture process, however, remains uncertain. We examine the possibility that irregular satellites were captured from the planetesimal disk during the early solar system instability when encounters between the outer planets occurred. Nesvorný et al. already showed that the irregular satellites of Saturn, Uranus, and Neptune were plausibly captured during planetary encounters. Here we find that the current instability models present favorable conditions for capture of irregular satellites at Jupiter as well, mainly because Jupiter undergoes a phase of close encounters with an ice giant. We show that the orbital distribution of bodies captured during planetary encounters provides a good match to the observed distribution of irregular satellites at Jupiter. The capture efficiency for each particle in the original transplanetary disk is found to be (1.3-3.6) × 10{sup –8}. This is roughly enough to explain the observed population of jovian irregular moons. We also confirm Nesvorný et al.'s results for the irregular satellites of Saturn, Uranus, and Neptune.
Irregular Variability In Kepler Photometry
Schlecker, Martin
2016-12-01
The transit method is the most successful tool for exoplanet discovery to date. With more than half of all known exoplanets discovered by Kepler using this method, the mission also revealed a number of objects with dimming events that defy the common explanations, the most prominent being KIC 8462852 aka ``Tabby's star''. I embarked on a search for objects with such irregular transit signatures in the data of K2, the two-wheeled successor mission of Kepler. My method is a combination of automated pre-selection of targets showing downward flux excursions and visual light curve inspection of the selected subset comprising about SI{1.5}% of the initial sample. In addition, I developed a tool to constrain the effective temperature of a planet-hosting star from photometry alone. This software finds broad application in any science case where a photometric spectral type estimate is necessary. I used existing transit models and Bayesian inference to perform a Markov Chain Monte Carlo (MCMC) analysis of a planetary candidate I discovered. This putative gas giant is in a SI{1.32}day circular orbit with an exceptionally tight orbital radius of a ≈ 0.012 AU. My analysis revealed a scaled planetary radius of R_{p}/R_star = 0.0927±0.0026 and an edge-on orientation with an inclination i=89.8+3.0-3.4. EPIC 217393088.01 is one of the closest-orbiting exoplanets ever detected and the first giant planet with such a small orbital radius. An additional major finding of my search is EPIC 220262993, which exhibits aperiodic, asymmetric dips in flux with rapid dimming rates and up to SI{˜25}% depth, lasting for SIrange{2}{4} day. In previous works based on optical and mid-infrared photometry, this object was inconsistently classified as a possible quasar or a white dwarf. We conducted follow-up observations both photometrically with GROND on the MPI/ESO SI{2.2} meter telescope in La Silla (Chile) and spectroscopically with FIRE on the Magellan/Baade SI{6.5} meter telescope. With
NOTE - Meiotic irregularities in Capsicum L. species
Margarete Magalhães Souza
2012-01-01
Full Text Available Cytogenetic and pollen viability (PV studies were performed in pepper accessions, Capsicum chinense and Capsicum baccatum. Irregularities such as laggard and univalent chromosomes, bridges, problems in the spindle fibers and cytomixis were observed, especially in C. baccatum which was the most unstable genotype. In the post-meiotic products, irregularities were observed, on average, at 20 % of the microspores in C. baccatum and 17 % in C. chinense. PV in C. baccatum was below 70 %, while in C. chinense, it was above 80 %. Meiotic irregularities in Capsicum, mainly in C. baccatum, considering the low PV estimated, were significant but not impeditive for fertilization.
Robust Spectral Estimation of Track Irregularity
Fu Wenjuan; Chen Chunjun
2005-01-01
Because the existing spectral estimation methods for railway track irregularity analysis are very sensitive to outliers, a robust spectral estimation method is presented to process track irregularity signals. The proposed robust method is verified using 100 groups of clean/contaminated data reflecting he vertical profile irregularity taken from Bejing-Guangzhou railway with a sampling frequency of 33 data every 10 m, and compared with the Auto Regressive (AR) model. The experimental results show that the proposed robust estimation is resistible to noise and insensitive to outliers, and is superior to the AR model in terms of efficiency, stability and reliability.
The irregularity of two types of trees
Liu, Yang; Li, Jianxi; Chee, Wai
2015-01-01
The irregularity of a graph G is defined as the sum of weights |d(u) − d(v)| of all edges uv of G, where d(u) and d(v) are the degrees of the vertices u and v in G, respectively. In this paper, some structural properties on trees with maximum (or minimum) irregularity among trees with given degree sequence and trees with given branching number are explored, respectively. Moreover, the corresponding trees with maximum (or minimum) irregularity are also found, respectively.
Suction-based grasping tool for removal of regular- and irregular-shaped intraocular foreign bodies.
Erlanger, Michael S; Velez-Montoya, Raul; Mackenzie, Douglas; Olson, Jeffrey L
2013-01-01
To describe a suction-based grasping tool for the surgical removal of irregular-shaped and nonferromagnetic intraocular foreign bodies. A surgical tool with suction capabilities, consisting of a stainless steel shaft with a plastic handle and a customizable and interchangeable suction tip, was designed in order to better engage and manipulate irregular-shaped in-traocular foreign bodies of various sizes and physical properties. The maximal suction force and surgical capabilities were assessed in the laboratory and on a cadaveric eye vitrectomy model. The suction force of the water-tight seal between the intraocular foreign body and the suction tip was estimated to be approximately 40 MN. During an open-sky vitrectomy in a porcine model, the device was successful in engaging and firmly securing foreign bodies of different sizes and shapes. The suction-based grasping tool enables removal of irregular-shaped and nonferromagnetic foreign bodies. Copyright 2013, SLACK Incorporated.
The K-Spectrum of Ionospheric Irregularities
D'Angelo, N.; Pécseli, Hans; Petersen, P. I.
1975-01-01
Laboratory measurements in a cesium plasma device indicate that the wave number (power) spectrum of irregularities produced by the Farley instability is of the type P(K) ∝ K −β, where β ≃ 3.5-3.8.......Laboratory measurements in a cesium plasma device indicate that the wave number (power) spectrum of irregularities produced by the Farley instability is of the type P(K) ∝ K −β, where β ≃ 3.5-3.8....
Wideband irregular-shaped fractal antennas
Kolesov, V. V.; Krupenin, S. V.
2007-01-01
This paper proposes an algorithm of generating fully reproducible irregular fractal structures for antenna design. Three types of pseudorandom fractal clusters are introduced. The multi-frequency behavior of the irregular-shaped fractal antennas is studied by means of numerical analysis. The antenna behavior is studied under feeder displacement. As shown by numerical results feeder displacements allow one to control the spatial-frequency antenna characteristics.
Approaches to handle scarce resources for Bengali statistical machine translation
Roy, Maxim
2010-01-01
Machine translation (MT) is a hard problem because of the highly complex, irregular and diverse nature of natural language. MT refers to computerized systems that utilize software to translate text from one natural language into another with or without human assistance. It is impossible to accurately model all the linguistic rules and relationships that shape the translation process, and therefore MT has to make decisions based on incomplete data. In order to handle this incomplete data, a pr...
Locating irregularly shaped clusters of infection intensity
Niko Yiannakoulias
2010-05-01
Full Text Available Patterns of disease may take on irregular geographic shapes, especially when features of the physical environment influence risk. Identifying these patterns can be important for planning, and also identifying new environmental or social factors associated with high or low risk of illness. Until recently, cluster detection methods were limited in their ability to detect irregular spatial patterns, and limited to finding clusters that were roughly circular in shape. This approach has less power to detect irregularly-shaped, yet important spatial anomalies, particularly at high spatial resolutions. We employ a new method of finding irregularly-shaped spatial clusters at micro-geographical scales using both simulated and real data on Schistosoma mansoni and hookworm infection intensities. This method, which we refer to as the “greedy growth scan”, is a modification of the spatial scan method for cluster detection. Real data are based on samples of hookworm and S. mansoni from Kitengei, Makueni district, Kenya. Our analysis of simulated data shows how methods able to find irregular shapes are more likely to identify clusters along rivers than methods constrained to fixed geometries. Our analysis of infection intensity identifies two small areas within the study region in which infection intensity is elevated, possibly due to local features of the physical or social environment. Collectively, our results show that the “greedy growth scan” is a suitable method for exploratory geographical analysis of infection intensity data when irregular shapes are suspected, especially at micro-geographical scales.
Groupe ST/HM
2002-01-01
A new EDH document entitled 'Transport/Handling Request' will be in operation as of Monday, 11th February 2002, when the corresponding icon will be accessible from the EDH desktop, together with the application instructions. This EDH form will replace the paper-format transport/handling request form for all activities involving the transport of equipment and materials. However, the paper form will still be used for all vehicle-hire requests. The introduction of the EDH transport/handling request form is accompanied by the establishment of the following time limits for the various services concerned: 24 hours for the removal of office items, 48 hours for the transport of heavy items (of up to 6 metric tons and of standard road width), 5 working days for a crane operation, extra-heavy transport operation or complete removal, 5 working days for all transport operations relating to LHC installation. ST/HM Group, Logistics Section Tel: 72672 - 72202
A novel synthesis approach for birefringent filters having arbitrarily amplitude transmittances
Halassi, Abde Rezzaq; Hamdi, Rachid; Bendimerad, Djalal Falih; Benkelfat, Badr-Eddine
2016-06-01
In this paper, we present a novel procedure for the synthesis of a filter having an arbitrarily specified amplitude transmittance. The filter configuration consists of N birefringent stages placed between a polarizer and an analyzer, with each stage containing an identical section and a variable section. An additional variable section is placed in front of the analyzer. The synthesis procedure is based on the resolution of a generalized nonlinear equation system directly deducted from the Jones matrix formalism to determine the angles of each stage, the angle of the analyzer and the phase shifts of the variable sections. A typical example of a 6-stage birefringent filter having an arbitrarily non-symmetric amplitude transmittance is shown and the opto-geometrical parameters are given to demonstrate the efficiency of the proposed synthesis procedure. The results obtained show an excellent agreement with those developed in the literature.
Sainath, K; Donderici, B
2013-01-01
We develop a general-purpose formulation, based on two-dimensional spectral integrals, for computing electromagnetic fields produced by arbitrarily-oriented dipoles in planar-stratified environments, where each layer may exhibit arbitrary and independent anisotropy in both the (complex) permittivity and permeability. Among the salient features of our formulation are (1) computation of eigenmodes (characteristic plane waves) supported in arbitrarily anisotropic media in a numerically robust fashion, (2) implementation of an hp-adaptive refinement for the numerical integration to evaluate the radiation and weakly-evanescent spectra contributions, and (3) development of an adaptive extension of an integral convergence acceleration technique to compute the strongly-evanescent spectrum contribution. While other semianalytic techniques exist to solve this problem, none have full applicability to media exhibiting arbitrary double anisotropies in each layer, where one must account for the whole range of possible phen...
Kim, Kyoohyun
2016-01-01
Optical trapping can be used to manipulate the three-dimensional (3-D) motion of spherical particles based on the simple prediction of optical forces and the responding motion of samples. However, controlling the 3-D behaviour of non-spherical particles with arbitrary orientations is extremely challenging, due to experimental difficulties and the extensive computations. Here, we achieved the real-time optical control of arbitrarily shaped particles by combining the wavefront shaping of a trapping beam and measurements of the 3-D refractive index (RI) distribution of samples. Engineering the 3-D light field distribution of a trapping beam based on the measured 3-D RI map of samples generates a light mould, which can be used to manipulate colloidal and biological samples which have arbitrary orientations and/or shapes. The present method provides stable control of the orientation and assembly of arbitrarily shaped particles without knowing a priori information about the sample geometry. The proposed method can ...
Sørensen, Mads Vaarby; Matos, Joana E.; Prætorius, Helle
2010-01-01
Homeostatic control of plasma K+ is a necessary physiological function. The daily dietary K+ intake of approximately 100 mmol is excreted predominantly by the distal tubules of the kidney. About 10% of the ingested K+ is excreted via the intestine. K+ handling in both organs is specifically...
Improving coal handling effectiveness
Walker, S.
2003-10-01
Appropriate coal handling systems are essential for successful coal utilisation. The paper looks at some of the options available, including crushers and hammer mills, wear-resistant liners for chutes and wagons, and dewatering systems. These are individual components within larger systems such as stockyard stacking and reclaiming installations. 5 photos.
吴双清; 闫沐霖
2003-01-01
The Hawking radiation of Weyl neutrinos in an arbitrarily accelerating Kinnersley black hole is investigated using a method of the generalized tortoise coordinate transformation.Both the location and temperature of the event horizon depend on the time and on the angles.They are in agreement with the previous results,but thethermal radiation spectrum of massless spinor particles displays a type of spin-acceleration coupling effect.
Gilmanov, Anvar, E-mail: agilmano@umn.edu [Saint Anthony Falls Laboratory, University of Minnesota, Minneapolis, MN 55414 (United States); Le, Trung Bao, E-mail: lebao002@umn.edu [Saint Anthony Falls Laboratory, University of Minnesota, Minneapolis, MN 55414 (United States); Sotiropoulos, Fotis, E-mail: fotis@umn.edu [Saint Anthony Falls Laboratory, University of Minnesota, Minneapolis, MN 55414 (United States); Department of Civil, Environmental and Geo-Engineering, University of Minnesota, Minneapolis, MN 55414 (United States)
2015-11-01
We present a new numerical methodology for simulating fluid–structure interaction (FSI) problems involving thin flexible bodies in an incompressible fluid. The FSI algorithm uses the Dirichlet–Neumann partitioning technique. The curvilinear immersed boundary method (CURVIB) is coupled with a rotation-free finite element (FE) model for thin shells enabling the efficient simulation of FSI problems with arbitrarily large deformation. Turbulent flow problems are handled using large-eddy simulation with the dynamic Smagorinsky model in conjunction with a wall model to reconstruct boundary conditions near immersed boundaries. The CURVIB and FE solvers are coupled together on the flexible solid–fluid interfaces where the structural nodal positions, displacements, velocities and loads are calculated and exchanged between the two solvers. Loose and strong coupling FSI schemes are employed enhanced by the Aitken acceleration technique to ensure robust coupling and fast convergence especially for low mass ratio problems. The coupled CURVIB-FE-FSI method is validated by applying it to simulate two FSI problems involving thin flexible structures: 1) vortex-induced vibrations of a cantilever mounted in the wake of a square cylinder at different mass ratios and at low Reynolds number; and 2) the more challenging high Reynolds number problem involving the oscillation of an inverted elastic flag. For both cases the computed results are in excellent agreement with previous numerical simulations and/or experiential measurements. Grid convergence tests/studies are carried out for both the cantilever and inverted flag problems, which show that the CURVIB-FE-FSI method provides their convergence. Finally, the capability of the new methodology in simulations of complex cardiovascular flows is demonstrated by applying it to simulate the FSI of a tri-leaflet, prosthetic heart valve in an anatomic aorta and under physiologic pulsatile conditions.
Gilmanov, Anvar; Le, Trung Bao; Sotiropoulos, Fotis
2015-11-01
We present a new numerical methodology for simulating fluid-structure interaction (FSI) problems involving thin flexible bodies in an incompressible fluid. The FSI algorithm uses the Dirichlet-Neumann partitioning technique. The curvilinear immersed boundary method (CURVIB) is coupled with a rotation-free finite element (FE) model for thin shells enabling the efficient simulation of FSI problems with arbitrarily large deformation. Turbulent flow problems are handled using large-eddy simulation with the dynamic Smagorinsky model in conjunction with a wall model to reconstruct boundary conditions near immersed boundaries. The CURVIB and FE solvers are coupled together on the flexible solid-fluid interfaces where the structural nodal positions, displacements, velocities and loads are calculated and exchanged between the two solvers. Loose and strong coupling FSI schemes are employed enhanced by the Aitken acceleration technique to ensure robust coupling and fast convergence especially for low mass ratio problems. The coupled CURVIB-FE-FSI method is validated by applying it to simulate two FSI problems involving thin flexible structures: 1) vortex-induced vibrations of a cantilever mounted in the wake of a square cylinder at different mass ratios and at low Reynolds number; and 2) the more challenging high Reynolds number problem involving the oscillation of an inverted elastic flag. For both cases the computed results are in excellent agreement with previous numerical simulations and/or experiential measurements. Grid convergence tests/studies are carried out for both the cantilever and inverted flag problems, which show that the CURVIB-FE-FSI method provides their convergence. Finally, the capability of the new methodology in simulations of complex cardiovascular flows is demonstrated by applying it to simulate the FSI of a tri-leaflet, prosthetic heart valve in an anatomic aorta and under physiologic pulsatile conditions.
HAPE3D-a new constructive algorithm for the 3D irregular packing problem
Xiao LIU; Jia-min LIU; An-xi CAO; Zhuang-le YAO
2015-01-01
We propose a new constructive algorithm, called HAPE3D, which is a heuristic algorithm based on the principle of minimum total potential energy for the 3D irregular packing problem, involving packing a set of irregularly shaped polyhedrons into a box-shaped container with fixed width and length but unconstrained height. The objective is to allocate all the polyhedrons in the container, and thus minimize the waste or maximize profit. HAPE3D can deal with arbitrarily shaped polyhedrons, which can be rotated around each coordinate axis at different angles. The most outstanding merit is that HAPE3D does not need to calculate no-fit polyhedron (NFP), which is a huge obstacle for the 3D packing problem. HAPE3D can also be hybridized with a meta-heuristic algorithm such as simulated annealing. Two groups of computational experiments demonstrate the good perfor-mance of HAPE3D and prove that it can be hybridized quite well with a meta-heuristic algorithm to further improve the packing quality.
Restructuring surface tessellation with irregular boundary conditions
Tsung-Hsien Wang
2014-12-01
Full Text Available In this paper, the surface tessellation problem is explored, in particular, the task of meshing a surface with the added consideration of incorporating constructible building components. When a surface is tessellated into discrete counterparts, certain unexpected conditions usually occur at the boundary of the surface, in particular, when the surface is being trimmed. For example, irregularly shaped panels form at the trimmed edges. To reduce the number of irregular panels that may form during the tessellation process, this paper presents an algorithmic approach to restructuring the surface tessellation by investigating irregular boundary conditions. The objective of this approach is to provide an alternative way for freeform surface manifestation from a well-structured discrete model of the given surface.
Parazin, R.J.
1995-05-31
This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.).
Uranium hexafluoride handling. Proceedings
1991-12-31
The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.
Spelling Pronunciations: Transforming Irregularity into Regularity
Landerl, Karin; Thaler, Verena; Reitsma, Pieter
2008-01-01
In a 10-day training, the efficacy of spelling pronunciations on German speaking 5th-graders' spelling skills for irregular words was examined. Poor spellers were less efficient in learning the spelling pronunciations than age-adequate spellers. On post-tests, 1 week after the last training day and between 5 and 12 weeks after post-test 1, poor…
Informal labor and irregular migrant workers
M.J. van Meeteren (Masja)
2013-01-01
textabstractIrregular migrants, also referred to as “undocumented migrants” or “illegal migrants,” are immigrants who do not have legal permission to stay in the country they have migrated to and frequently take on informal and precarious employment. They may have entered the country legally – on a
Color Survey of the Irregular Planetary Satellites
Graykowski, Ariel; Jewitt, David
2016-10-01
Irregular satellites are characterized by their larger orbital distance from their planet, their high eccentricity and their high inclination, all indicating that they were captured. However, the mechanism of capture and the location of origin of the satellites remain unknown. We are conducting a photometric survey of the irregular satellites of the giant planets using the LRIS instrument on the 10-meter telescope at the Keck Observatory in Hawaii. The measured colors will be compared to other planetary bodies in search for similarities and differences that may reflect upon the origin of the satellites. For example, if irregular satellites were captured from the Kuiper Belt then some should contain the ultrared material that is common in the trans-Neptunian and Centaur populations. If the irregular satellites of Jupiter were captured from the same source population as the Jovian Trojans, then it is natural to expect that the surface properties of satellites and Trojans should be the same. We will present initial results of this work.
default and irregular attendance at treatment centres
Leprosy control in the post leprosaria abolition years in Nigeria: Reasons for default and irregular ... leprosy seen at the four leprosy clinics in Anambra State in a face to face interview. ..... India, 1974; 46: 46-48. 7. Leonard G, Sangure A, ...
Enhanced wave absorption through irregular interfaces
Félix, S.; Sapoval, B.; Filoche, M.; Asch, M.
2009-01-01
The diffraction and absorption of waves by a system with both absorbing properties and irregular geometry is an open physical problem. A more reachable and closely related question is the understanding of wave oscillations in confined systems containing an absorbing material with an irregular shape. This has to be solved to understand why anechoic chambers (electromagnetic or acoustic) do work better with irregular absorbing walls. The answer to this question could also be used in other fields such as light or microwave absorption, or also to improve the performances of break-waters in order to damp sea-waves. It is found here that, in resonators containing an irregular shaped absorbent material, there appears a new type of mode localization. This phenomemon, that we call "astride" localization, describes the fact that these modes exist in both the lossless and the lossy regions. It is these modes that are particularly efficient in dissipating the energy of waves excited in the non-absorbing region.
Spelling Pronunciations: Transforming Irregularity into Regularity
Landerl, Karin; Thaler, Verena; Reitsma, Pieter
2008-01-01
In a 10-day training, the efficacy of spelling pronunciations on German speaking 5th-graders' spelling skills for irregular words was examined. Poor spellers were less efficient in learning the spelling pronunciations than age-adequate spellers. On post-tests, 1 week after the last training day and between 5 and 12 weeks after post-test 1, poor…
Acoustic and Linguistic Interdependencies of Irregular Phonation
2010-05-01
falther forward subsystems. The subglottal subsystem, including the abdominal muscles, intercostals , diaphragm, lungs, branching airways, and trachea...labeled prosodically, which limits us to acoustic and phonetic deductions about irregular phonation. TIMIT was developed as a joint eff0l1 between
Photometric Survey of the Irregular Satellites
Grav, T; Gladman, B; Aksnes, K; Grav, Tommy; Holman, Matthew J.; Gladman, Brett; Aksnes, Kaare
2003-01-01
We present BVRI colors of 13 Jovian and 8 Saturnian irregular satellites obtained with the 2.56m Nordic Optical Telescope on La Palma, the 6.5m Magellan Baade Telescope on La Campanas, and the 6m MMT on Mt. Hopkins. The observations were performed between December 2001 to March 2002. Nearly all of the known irregular satellites can be divided into two distinct classes based on their colors. One, the grey color class, has the similar colors to the C-type asteroid, and the other, the light red color class, has colors similar to P/D-type asteroids. We also find at least one object, the Jovian irregular J XXIII Kalyke, that has colors similar to the red colored Centaurs/TNOs, although its classification is unsecure. We also find that there is a correlation between the physical properties and dynamical properties of the irregular satellites. Most of the dynamical clusters have homogeneous colors, which points to single homogeneous progenitors being cratered or fragmented as the source of each individual cluster. T...
Irregular wavelet frames on L2(Rn)
YANG Deyun; ZHOU Xingwei
2005-01-01
In this paper, we present the conditions on dilation parameter {sj }j that ensure a discrete irregular wavelet system {Snj/2ψ(sj·-bk)}j∈(Z),k∈(Z)n to be a frame on L2(Rn),and for the wavelet frame we consider the perturbations of translation parameter b and frame function ψ respectively.
Locating irregularly shaped clusters of infection intensity
Yiannakoulias, Niko; Wilson, Shona; Kariuki, H. Curtis
2010-01-01
Patterns of disease may take on irregular geographic shapes, especially when features of the physical environment influence risk. Identifying these patterns can be important for planning, and also identifying new environmental or social factors associated with high or low risk of illness. Until...
Irregularly Shaped Space-Filling Truncated Octahedra
Hanson, John Robert
2008-01-01
For any parent tetrahedron ABCD, centroids of selected sub-tetrahedra form the vertices of an irregularly shaped space-filling truncated octahedron. To reflect these properties, such a figure will be called an ISTO. Each edge of the ISTO is parallel to and one-eighth the length of one of the edges of tetrahedron ABCD and the volume of the ISTO is…
Generalisation of Regular and Irregular Morphological Patterns.
Prasada, Sandeep; and Pinker, Steven
1993-01-01
When it comes to explaining English verbs' patterns of regular and irregular generalization, single-network theories have difficulty with the former, rule-only theories with the latter process. Linguistic and psycholinguistic evidence, based on observation during experiments and simulations in morphological pattern generation, independently call…
Basics for Handling Food Safely
... o a rm ct a s tion Basics for Handling Food Safely Safe steps in food handling, cooking, and storage are essential to prevent foodborne ... and soap for 20 seconds before and after handling food. · Don’t cross-contaminate. Keep raw meat, ...
Students' Strategies for Exception Handling
Rashkovits, Rami; Lavy, Ilana
2011-01-01
This study discusses and presents various strategies employed by novice programmers concerning exception handling. The main contributions of this paper are as follows: we provide an analysis tool to measure the level of assimilation of exception handling mechanism; we present and analyse strategies to handle exceptions; we present and analyse…
Prestack reverse-time depth migration of arbitrarily wide-angle wave equations
HE Bing-shou; ZHANG Hui-xing; ZHANG Jing
2008-01-01
Based on arbitrarily wide-angle wave equations, a reverse-time propagation scheme is developed by substituting the partial derivatives of depth and time with central differences. The partial derivative of horizontal direction is replaced with high order difference. The imaging condition is computed by solving the eikonal equations. On the basis of above techniques, a prestack reverse-time depth migration algorithm is developed. The processing exam-ples of synthetic data show that the method can remove unwanted internal reflections and decrease the migration noise. The method also has the advantage of fidelity and is appficable of dip angle reflector imaging.
LIU Wuxiang; MA Shaokun; WU Hao
2014-01-01
An orthotropic functionally graded piezoelectric rectangular plate with arbitrarily distributed material properties was studied, which is simply supported and grounded (electrically) on its four lateral edges. The state equations of the functionally graded piezoelectric material were obtained using the state-space approach, and a Peano-Baker series solution was obtained for the coupled electroelastic fields of the functionally graded piezoelectric plate subjected to mechanical and electric loading on its upper and lower surfaces. The influence of different distributions of material properties on the structural response of the plate was studied using the obtained solutions.
A general method for numerical Green's function in arbitrarily layered soils
ZOU Jun; HE Jinliang; ZENG Rong; SUN Weiming; YU Gang
2003-01-01
A straightforward approach is developed to calculate Green's function of a point current source in horizontal multi-layer soils. The sampling value of the coefficient of Green's function is obtained in an iterative way in terms of the equation group satisfying the pertinent boundary value problem. Further, the closed-form expression of multilayered soil Green's function can be given by the vector matrix pencil technology. The numerical results are in agreement with those by using other softwares. The approach proposed here is applicable to grounding problems with the structure of arbitrarily layered soil without needing the analytical expression of Green's function.
Guevara-Palma Luis
2015-01-01
Full Text Available The nesting problem of irregular shapes within irregular areas has been studied from several approaches due to their application in different industries. The particular case of cutting leather involves several restrictions that add complexity to this problem, it is necessary to generate products that comply with the quality required by customers This paper presents a methodology for the accommodation of irregular shapes in an irregular area (leather considering the constraints set by the footwear industry, and the results of this methodology when applied by a computer system. The scope of the system is to develop a working prototype that operates under the guidelines of a commercial production line of a sponsor company. Preliminary results got a reduction of 70% of processing time and improvement of 5% to 7% of the area usage when compared with manual accommodation.
Sainath, Kamalesh; Teixeira, Fernando L; Donderici, Burkay
2014-01-01
We develop a general-purpose formulation, based on two-dimensional spectral integrals, for computing electromagnetic fields produced by arbitrarily oriented dipoles in planar-stratified environments, where each layer may exhibit arbitrary and independent anisotropy in both its (complex) permittivity and permeability tensors. Among the salient features of our formulation are (i) computation of eigenmodes (characteristic plane waves) supported in arbitrarily anisotropic media in a numerically robust fashion, (ii) implementation of an hp-adaptive refinement for the numerical integration to evaluate the radiation and weakly evanescent spectra contributions, and (iii) development of an adaptive extension of an integral convergence acceleration technique to compute the strongly evanescent spectrum contribution. While other semianalytic techniques exist to solve this problem, none have full applicability to media exhibiting arbitrary double anisotropies in each layer, where one must account for the whole range of possible phenomena (e.g., mode coupling at interfaces and nonreciprocal mode propagation). Brute-force numerical methods can tackle this problem but only at a much higher computational cost. The present formulation provides an efficient and robust technique for field computation in arbitrary planar-stratified environments. We demonstrate the formulation for a number of problems related to geophysical exploration.
Holger Boche
2012-08-01
Full Text Available The paradigm shift from an exclusive allocation of frequency bands, one for each system, to a shared use of frequencies comes along with the need of new concepts since interference will be an ubiquitous phenomenon. In this paper, we use the concept of arbitrarily varying channels to model the impact of unknown interference caused by coexisting wireless systems which operate on the same frequencies. Within this framework, capacity can be zero if pre-specified encoders and decoders are used. This necessitates the use of more sophisticated coordination schemes where the choice of encoders and decoders is additionally coordinated based on common randomness. As an application we study the arbitrarily varying bidirectional broadcast channel and derive the capacity regions for different coordination strategies. This problem is motivated by decode-and-forward bidirectional or two-way relaying, where a relay establishes a bidirectional communication between two other nodes while sharing the resources with other coexisting wireless networks.
Magnetic fields in Local Group dwarf irregulars
Chyzy, Krzysztof T; Beck, Rainer; Bomans, Dominik J
2011-01-01
We clarify whether strong magnetic fields can be effectively generated in typically low-mass dwarf galaxies and what is the role of dwarf galaxies in the magnetization of the Universe. We performed a search for radio emission and magnetic fields in an unbiased sample of 12 Local Group (LG) irregular and dwarf irregular galaxies with the 100m Effelsberg telescope at 2.64 and 4.85GHz. Magnetic fields in LG dwarfs are three times weaker than in the normal spirals (6muG) are observed only in dwarfs of extreme characteristics while typical LG dwarfs are not suitable objects for efficient supply of magnetic fields to the intergalactic medium.
Generating Performance Models for Irregular Applications
Friese, Ryan D.; Tallent, Nathan R.; Vishnu, Abhinav; Kerbyson, Darren J.; Hoisie, Adolfy
2017-05-30
Many applications have irregular behavior --- non-uniform input data, input-dependent solvers, irregular memory accesses, unbiased branches --- that cannot be captured using today's automated performance modeling techniques. We describe new hierarchical critical path analyses for the \\Palm model generation tool. To create a model's structure, we capture tasks along representative MPI critical paths. We create a histogram of critical tasks with parameterized task arguments and instance counts. To model each task, we identify hot instruction-level sub-paths and model each sub-path based on data flow, instruction scheduling, and data locality. We describe application models that generate accurate predictions for strong scaling when varying CPU speed, cache speed, memory speed, and architecture. We present results for the Sweep3D neutron transport benchmark; Page Rank on multiple graphs; Support Vector Machine with pruning; and PFLOTRAN's reactive flow/transport solver with domain-induced load imbalance.
A Hybrid Heuristics for Irregular Flight Recovery
ZHAO Xiu-li; ZHU Jin-fu; GAO Qiang
2010-01-01
Adverse weather conditions, congestion at airports, and mechanical failures often disrupt regular flight schedules. The irregular flight recovery problem aims to recover these schedules through reassignments of flights and cancellations. In this article, we develop the classic resource assignment model for the irregular flight recovery problem, and a new hybrid heuristic procedure based on greedy random adaptive search procedure (GRASP) and simulated annealing algorithm is presented to solve this problem. As compared with the original GRASP method, the proposed algorithm demonstrates quite a high global optimization capability. Computational experiments on large-scale problems show that the proposed procedure is able to generate feasible revised flight schedules of good quality in less than five seconds.
Parallel Programming Strategies for Irregular Adaptive Applications
Biswas, Rupak; Biegel, Bryan (Technical Monitor)
2001-01-01
Achieving scalable performance for dynamic irregular applications is eminently challenging. Traditional message-passing approaches have been making steady progress towards this goal; however, they suffer from complex implementation requirements. The use of a global address space greatly simplifies the programming task, but can degrade the performance for such computations. In this work, we examine two typical irregular adaptive applications, Dynamic Remeshing and N-Body, under competing programming methodologies and across various parallel architectures. The Dynamic Remeshing application simulates flow over an airfoil, and refines localized regions of the underlying unstructured mesh. The N-Body experiment models two neighboring Plummer galaxies that are about to undergo a merger. Both problems demonstrate dramatic changes in processor workloads and interprocessor communication with time; thus, dynamic load balancing is a required component.
Conditions for Adopting an Irregular Defense Strategy
2014-06-01
however, believed that the irregular campaign needed to be conducted in the rural and urban area simultaneously.38 Fidel Castro and Che Guevara...shape; they were conscripts and unwilling to fight. The Batista regime was already unpopular when Castro and Guevara came along, and here is where the...scale publicity effort driven by Castro who had always shown a great capability to turn even unsuccessful military actions into propaganda triumphs
Synchronizing data from irregularly sampled sensors
Uluyol, Onder
2017-07-11
A system and method include receiving a set of sampled measurements for each of multiple sensors, wherein the sampled measurements are at irregular intervals or different rates, re-sampling the sampled measurements of each of the multiple sensors at a higher rate than one of the sensor's set of sampled measurements, and synchronizing the sampled measurements of each of the multiple sensors.
Gelatinous plankton: irregularities rule the world (sometimes)
Boero, F.; Bouillon, J; GRAVILI C.; Miglietta, M. P.; Parsons, T. R.; Piraino, S.
2008-01-01
In spite of being one of the most relevant components of the biosphere, the plankton-benthos network is still poorly studied as such. This is partly due to the irregular occurrence of driving phenomena such as gelatinous plankton pulses in this realm. Gelatinous plankters rely on their life cycles and histories to exploit temporarily abundant resources with an undeniable, but often overlooked, impact on marine food webs. Dramatic increases of gelatinous filter-feeders and/or carnivores (both ...
When You Visit Your Doctor: Irregular Menstrual Periods
... delivered to your inbox ! When You Visit Your Doctor - Irregular Menstrual Periods Irregular Menstrual Periods Updated: January ... Have you ever had difficulty getting pregnant? Your Doctor Might Examine the Following Body Structures or Functions: ...
Total irregular labeling of butterfly network on level two
Nurdin
2017-08-01
Previous results related to the concepts of the total irregular labeling of a graph indicate that the butterfly network was one of some graphs which have not been specified in term of the total irregularity strengths. This paper aimed to determine the total vertex irregularity strength, the total edge irregularity strength, and the total irregularity strength of butterfly network on level 2. The assessment of three parameters of butterfly network was conducted by determining the lower bound and the upper bound. The lower bound was analyzed based on the characteristics of the graph and other proponent theorems, while upper bound was analyzed by constructing a function. In this paper we determine that the total vertex irregularity strength, the total edge irregularity strength, and the total irregularity strength of butterfly network are 4, 6, and 6, respectively.
Length measurements of mid-latitude scintillation irregularities
Macdougall, J.W. (Western Ontario, University, London (Canada))
1992-04-01
The lengths of irregularities which produce 150-MHz amplitude scintillations have been measured at 43 deg N, 81 deg W (geographic) using arrays of receivers with large spacings. The average length (major axis radius) of the irregularities was 6.1 km. This is much shorter than expected and implies that the measurements are of 'young' irregularities, less than 1 minute old. These irregularities appear to be a large, 25-50-percent perturbation of the background density. 8 refs.
Vertex Operators for Irregular Conformal Blocks: Supersymmetric Case
Polyakov, Dimitri
2016-01-01
We construct supersymmetric irregular vertex operators of arbitrary rank, appearing in the colliding limit of primary fields. We find that the structure of the supersymmetric irregular vertices differs significantly from the bosonic case: upon supersymmetrization, the irregular operators are no longer the eigenstates of positive Virasoro and $W_N$ generators but block-diagonalize them. We relate the block-diagonal structure of the irregular vertices to contributions of the Ramond sector to the colliding limit.
Hitchin Equation, Irregular Singularity, and $N=2$ Asymptotical Free Theories
Nanopoulos, Dimitri
2010-01-01
In this paper, we study irregular singular solution to Hitchin's equation and use it to describe four dimensional $N=2$ asymptotically free gauge theories. For $SU(2)$ $A$ type quiver, two kinds of irregular singularities besides one regular singularity are needed for the solution of Hitchin's equation; We then classify irregular singularities needed for the general $SU(N)$ $A$ type quiver.
On irregularity strength of disjoint union of friendship graphs
Ali Ahmad
2013-11-01
Full Text Available We investigate the vertex total and edge total modication of the well-known irregularity strength of graphs. We have determined the exact values of the total vertex irregularity strength and the total edge irregularity strength of a disjoint union of friendship graphs.
16 CFR 501.6 - Cellulose sponges, irregular dimensions.
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Cellulose sponges, irregular dimensions. 501... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.6 Cellulose sponges, irregular dimensions. Variety packages of cellulose sponges of irregular dimensions, are exempted from the requirements of § 500.25 of...
New transport and handling contract
SC Department
2008-01-01
A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319
Ropeway material handling systems for lunar mining sites
Huttelmaier, H. P.; Carrick, Jonathan R.
The feasibility of ropeways for short- as well as long-distance material hauling on the lunar surface is discussed. Existing experience in ropeways and relevant knowledge on lunar environmental contraints are summarized. It is suggested that ease of erection, adaptivity to varying transportation lengths and irregular terrain, as well as weight considerations will result in lunar ropeway applications. Ropeways are argued to be the most viable material-handling system for a lunar activity site on the basis of available technology. A low-capacity, reversible ropeway system which separates track and haul rope is the most feasible system. It is possible to apply sensing systems and automation to a high degree.
Trends in Modern Exception Handling
Marcin Kuta
2003-01-01
Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.
Ginns, D.W.
1958-04-01
A means for handling remotely a sample pellet to be irradiated in a nuclear reactor is proposed. It is comprised essentially of an inlet tube extending through the outer shield of the reactor and being inclined so that its outer end is at a higher elevation than its inner end, an outlet tube extending through the outer shield being inclined so that its inner end is at a higher elevation than its outer end, the inner ends of these two tubes being interconnected, and a straight tube extending through the outer shield and into the reactor core between the inlet and outlet tubes and passing through the juncture of said inner ends. A rod-like member is rotatably and slidely operated within the central straight tube and has a receptacle on its inner end for receiving a sample pellet from the inlet tube. The rod member is operated to pick up a sample pellet from the inlet tube, carry the sample pellet into the irradiating position within the core, and return to the receiving position where it is rotated to dump the irradiated pellet into the outlet tube by which it is conveyed by gravity to the outside of the reactor. Stop members are provided in the inlet tube, and electrical operating devices are provided to control the sequence of the operation automatically.
Kim, Seulong
2016-01-01
Bi-isotropic media, which include isotropic chiral media and Tellegen media as special cases, are the most general form of linear isotropic media where the electric displacement and the magnetic induction are related to both the electric field and the magnetic intensity. In inhomogeneous bi-isotropic media, electromagnetic waves of two different polarizations are coupled to each other. In this paper, we develop a generalized version of the invariant imbedding method for the study of wave propagation in arbitrarily-inhomogeneous stratified bi-isotropic media, which can be used to solve the coupled wave propagation problem accurately and efficiently. We verify the validity and usefulness of the method by applying it to several examples, including the wave propagation in a uniform chiral slab, the surface wave excitation in a bilayer system made of a layer of Tellegen medium and a metal layer, and the mode conversion of transverse electromagnetic waves into longitudinal plasma oscillations in inhomogeneous Telle...
On Equation of Motion for Arbitrarily Shaped Particle under Action of Electromagnetic Radiation
Klacka, J
2002-01-01
Arguments of astronomers against equation of motion for arbitrarily shaped particle under action of electromagnetic radiation are discussed. Each of the arguments is commented in detail from the point of view of the required physics. It is shown that the arguments of astronomers, including referees in several astronomical and astrophysical journals, are unacceptable from the physical point of view. Detail explanations should help astronomers in better physical understanding of the equation of motion. Relativistically covariant equation of motion for real dust particle under the action of electromagnetic radiation is derived. The particle is neutral in charge. Equation of motion is expressed in terms of particle's optical properties, standardly used in optics for stationary particles.
朱良生; 洪广文
2001-01-01
Based on the high order nonlinear and dispersive wave equation with a dissipative term, a numerical model for nonlinear waves is developed. It is suitable to calculate wave propagation in water areas with an arbitrarily varying bottom slope and a relative depth h/L0≤1. By the application of the completely implicit stagger grid and central difference algorithm, discrete governing equations are obtained. Although the central difference algorithm of second-order accuracy both in time and space domains is used to yield the difference equations, the order of truncation error in the difference equation is the same as that of the third-order derivatives of the Boussinesq equation. In this paper, the correction to the first-order derivative is made, and the accuracy of the difference equation is improved. The verifications of accuracy show that the results of the numerical model are in good agreement with those of analytical solutions and physical models.
Jiang Qing-Quan; Yang Shu-Zheng; Wu Shuang-Qing
2006-01-01
This paper extends Parikh-Wilzcek's recent work, which treats the Hawking radiation as a semi-classical tunnelling process from the event horizon of four dimensional Schwarzshild and Reissner-Nordstr(o)m black holes, to that of arbitrarily dimensional Reissner-Nordstr(o)m de Sitter black hole. The result shows that the tunnelling rate is related to the change of Bekenstein-Hawking entropy and the factually radiant spectrum is no longer precisely thermal after taking the dynamical black hole background and energy conservation into account, but is consistent with the underlying unitary theory and then satisfies the first law of the black hole thermodynamics. Meanwhile, in Parikh-Wilzcek's framework, this paper points out that the information conservation is only suitable for the reversible process but in highly unstable evaporating black hole (irreversible process) the information loss is possible.
Variational Stability Form for the Capacitance of an Arbitrarily Shaped Conducting Plate
LIANGChanghong; LILong; ZHAIHuiqing
2004-01-01
A new analytical method for finding the capacitance of an arbitrarily shaped conducting plate is presented in this paper. If the charge density suitable to fringe conditions and the appropriate charge barycenter are supposed, the variational stability form with high accuracy for the capacitance C can be achieved by simple curve integrals or the superposition of basic triangles. In this paper, some analytical examples such as an elliptical plate, a regular polygonal plate and a rectangular plate are given. It is worth pointing out that the analytical closed-form for an elliptical plate is accurate. Comparing the result of the analytical closed-form for the square plate and the numerical result of Richardson's extrapolation, the relative error is less than 1.7%. Furthermore, the relationship between the charge barycenter and the variational stability is discussed.
Multiple scattering of arbitrarily incident Bessel beams by random discrete particles.
Cui, Zhiwei; Han, Yiping; Ai, Xia
2013-11-01
In this paper, we introduce an efficient numerical method to characterize the multiple scattering by random discrete particles illuminated by Bessel beams with arbitrary incidence. Specifically, the vector expressions of Bessel beams that perfectly satisfy Maxwell's equations in combination with rotation Euler angles are used to represent the arbitrarily incident Bessel beams. A hybrid vector finite element-boundary integral-characteristic-basis function method is utilized to formulate the scattering problems involving multiple discrete particles with a random distribution. Due to the flexibility of the finite element method, the adopted method can conveniently deal with the problems of multiple scattering by randomly distributed homogeneous particles, inhomogeneous particles, and anisotropic particles. Some numerical results are included to illustrate the validity and capability of the proposed method and to show the scattering behaviors of random discrete particles when they are illuminated by Bessel beams.
Mathematical model for the power generation from arbitrarily oriented photovoltaic panel
Hassan Qusay
2017-01-01
Full Text Available In this paper, a mathematical model for modelling the solar radiation components and photovoltaic arrays power outputs from arbitrarily oriented photovoltaic panel has been presented. Base on the model electrical power prediction of the photovoltaic system in realistic local condition has been presented and compared with experimental measurement. The results show the effectiveness of the proposed model, which provides tools to better understand the performance and reliability as well as decision-making tool in designing of a hybrid renewable energy base power generation system. It has been shown that base on the model prediction, the efficiency and possible failures of the system can be found which are important from the technical and economical point of view.
Failure of energy stability in Oldroyd-B fluids at arbitrarily low Reynolds numbers
Döring, C; Schumacher, J
2004-01-01
Energy theory for incompressible Newtonian fluids is, in many cases, capable of producing strong absolute stability criteria for steady flows. In those fluids the kinetic energy naturally defines a norm in which perturbations decay monotonically in time at sufficiently low (but non-zero) Reynolds numbers. There are, however, at least two obstructions to the generalization of such methods to Oldroyd-B fluids. One previously recognized problem is the fact that the natural energy does not correspond to a proper functional norm on perturbations. Another problem, original to this work, is the fact that fluctuations in Oldroyd-B fluids may be subject to non-normal amplification at arbitrarily low Reynolds numbers (albeit at sufficiently large Weissenberg numbers). Such transient growth, occuring even when the base flow is linearly stable, precludes the uniform monotonic decay of any reasonable measure of the disturbance's amplitude.
侯朝胜; 李婧; 龙泉
2003-01-01
The cubic B-splines taken as trial function, the large deflection of a circular plate with arbitrarily variable thickness,as well as the buckling load, have been calculated by the method of point collocation. The support can be elastic. Loads imposed can be polynomial distributed loads, uniformly distributed radial forces or moments along the edge respectively or their combinations. Convergent solutions can still be obtained by this method under the load whose value is in great excess of normal one. Under the action of the uniformly distributed loads, linear solutions of circular plates with linearly or quadratically variable thickness are compared with those obtained by the parameter method. Buckling of a circular plate with identical thickness beyond critical thrust is compared with those obtained by the power series method.
Auxetic two-dimensional lattice with Poisson's Ratio arbitrarily close to -1
Cabras, L
2014-01-01
In this paper we propose a new lattice structure having macroscopic Poisson's ratio arbitrarily close to the stability limit -1. We tested experimentally the effective Poisson's ratio of the micro-structured medium; the uniaxial test has been performed on a thermoplastic lattice produced with a 3d printing technology. A theoretical analysis of the effective properties has been performed and the expression of the macroscopic constitutive properties is given in full analytical form as a function of the constitutive properties of the elements of the lattice and on the geometry of the microstructure. The analysis has been performed on three micro-geometry leading to an isotropic behaviour for the cases of three-fold and six-fold symmetry and to a cubic behaviour for the case of four-fold symmetry.
Equation of Motion for an Arbitrarily Shaped Particle Moving in a Radiation Field
Klacka, J
2003-01-01
We consider the motion of uncharged dust grains of arbitrary shape including the effects of electromagnetic radiation and thermal emission. The resulting relativistically covariant equation of motion is expressed in terms of standard optical parameters. Explicit expressions for secular changes of osculating orbital elements are derived in detail for the special case of the Poynting-Robertson effect. Two subcases are considered: (i) central acceleration due to gravity and the radial component of radiation pressure independent of the particle velocity, (ii) central acceleration given by gravity and the radiation force as the disturbing force. The latter case yields results which may be compared with secular orbital evolution in terms of orbital elements for an arbitrarily shaped dust particle. The effects of solar wind are also presented.
Testing Of Choiced Ceramics Cutting Tools At Irregular Interrupted Cut
Kyncl, Ladislav; Malotová, Šárka; Nováček, Pavel; Nicielnik, Henryk; Šoková, Dagmar; Hemžský, Pavel; Pitela, David; Holubjak, Jozef
2015-12-01
This article discusses the test of removable ceramic cutting inserts during machining irregular interrupted cut. Tests were performed on a lathe, with the preparation which simulated us the interrupted cut. By changing the number of plates mounted in a preparation it simulate us a regular or irregular interrupted cut. When with four plates it was regular interrupted cut, the remaining three variants were already irregular cut. It was examined whether it will have the irregular interrupted cutting effect on the insert and possibly how it will change life of inserts during irregular interrupted cut (variable delay between shocks).
Synthetic generation of arbitrarily long series of flood hydrographs for flood risk assessment
Flores, Isabel; Sordo-Ward, Alvaro; Mediero, Luis; Garrote, Luis
2013-04-01
Flood risk assessment is an essential component of natural disaster management. Flood frequency analysis has traditionally been approached by fitting relatively short series of annual maxima of observations to a parametric probability distribution. Under this approach, only one relevant variable (usually peak discharge) can be analyzed, while in many practical applications, like dam safety analysis, the entire flood hydrograph is of interest. Obtaining a good representation of the ensemble of hydrographs would require extremely long historical flood series which almost never exist. Hydrometeorological modelling tools can be applied to extend the relatively short series of observations and generate an arbitrarily long series of synthetic events that can be used in flood risk assessment. The heavy computational burden of these processes requires the contribution of Information and Communication Technology (ICT) developments to enable the practical application of the hydrometeorological modelling chain for this purpose. In this paper, an example of this methodology is applied to the Santillana reservoir, located in the Manzanares basin, in Spain. The methodology is based on the Monte Carlo generation of synthetic hydrographs from rainstorms events extracted from arbitrarily long synthetic rainfall time series. The rainfall series are generated with the RainSim software, a model based on a spatial-temporal Neyman-Scott rectangular pulses process. The highest event of every year is chosen, based on three different criterions. The selected rainstorm events are transformed into runoff by the RIBS distributed rainfall-runoff event model, obtaining the ensemble of hydrographs which make possible to evaluate the associated flood risk. The procedure has been validated by comparing the observed flood frequency series in the Santillana reservoir with the synthetic ones, obtaining a good agreement.
Irregular satellite capture during planetary resonance passage
Ćuk, Matija; Gladman, Brett J.
2006-08-01
The passage of Jupiter and Saturn through mutual 1:2 mean-motion resonance has recently been put forward as explanation for their relatively high eccentricities [Tsiganis, K., Gomes, R., Morbidelli, A., Levison, H.F., 2005. Nature 435, 459-461] and the origin of Jupiter's Trojans [Morbidelli, A., Levison, H.F., Tsiganis, K., Gomes, R., 2005. Nature 435, 462-465]. Additional constraints on this event based on other small-body populations would be highly desirable. Since some outer satellite orbits are known to be strongly affected by the near-resonance of Jupiter and Saturn ("the Great Inequality"; Ćuk, M., Burns, J.A., 2004b. Astron. J. 128, 2518-2541), the irregular satellites are natural candidates for such a connection. In order to explore this scenario, we have integrated 9200 test particles around both Jupiter and Saturn while they went through a resonance-crossing event similar to that described by Tsiganis et al. [Tsiganis, K., Gomes, R., Morbidelli, A., Levison, H.F., 2005. Nature 435, 459-461]. The test particles were positioned on a grid in semimajor axes and inclinations, while their initial pericenters were put at just 0.01 AU from their parent planets. The goal of the experiment was to find out if short-lived bodies, spiraling into the planet due to gas drag (or alternatively on orbits crossing those of the regular satellites), could have their pericenters raised by the resonant perturbations. We found that about 3% of the particles had their pericenters raised above 0.03 AU (i.e. beyond Iapetus) at Saturn, but the same happened for only 0.1% of the particles at Jupiter. The distribution of surviving particles at Saturn has strong similarities to that of the known irregular satellites. If saturnian irregular satellites had their origin during the 1:2 resonance crossing, they present an excellent probe into the early Solar System's evolution. We also explore the applicability of this mechanism for Uranus, and find that only some of the uranian
Subsonic Mechanical Alignment of Irregular Grains
Lazarian, Alex
2007-01-01
We show that grains can be efficiently aligned by interacting with a subsonic gaseous flow. The alignment arises from grains having irregularities that scatter atoms with different efficiency in the right and left directions. The grains tend to align with long axes perpendicular to magnetic field, which corresponds to Davis-Greenstein predictions, but does not involve magnetic field. For rather conservative factors characterizing the grain helicity and scattering efficiency of impinging atoms, the alignment of helical grains is much more efficient than the Gold-type alignment processes.
Artificial periodic irregularities in the auroral ionosphere
M.T. Rietveld
Full Text Available Artificial periodic irregularities (API are produced in the ionospheric plasma by a powerful standing electromagnetic wave reflected off the F region. The resulting electron-density irregularities can scatter other high-frequency waves if the Bragg scattering condition is met. Such measurements have been performed at mid-latitudes for two decades and have been developed into a useful ionospheric diagnostic technique. We report here the first measurements from a high-latitude station, using the EISCAT heating facility near Tromsø, Norway. Both F-region and lower-altitude ionospheric echoes have been obtained, but the bulk of the data has been in the E and D regions with echoes extending down to 52-km altitude. Examples of API are shown, mainly from the D region, together with simultaneous VHF incoherent-scatter-radar (ISR data. Vertical velocities derived from the rate of phase change during the irregularity decay are shown and compared with velocities derived from the ISR. Some of the API-derived velocities in the 75–115-km height range appear consistent with vertical neutral winds as shown by their magnitudes and by evidence of gravity waves, while other data in the 50–70-km range show an unrealistically large bias. For a comparison with ISR data it has proved difficult to get good quality data sets overlapping in height and time. The initial comparisons show some agreement, but discrepancies of several metres per second do not yet allow us to conclude that the two techniques are measuring the same quantity. The irregularity decay time-constants between about 53 and 70 km are compared with the results of an advanced ion-chemistry model, and height profiles of recorded signal power are compared with model estimates in the same altitude range. The calculated amplitude shows good agreement with the data in that the maximum occurs at about the same height as that of the measured amplitude. The calculated time-constant agrees very well with the
Legal aspects of the EU policy on irregular immigration
Voinikov Vadim
2015-12-01
Full Text Available This article addresses the issues pertaining to the adoption and development of legislation on irregular migration in the context of uncontrolled growth in the number of immigrants from North Africa and the Middle East to the EU. The article attempts at studying the EU legislation on irregular migration, classifying it, and analysing the prospects of EU migration legislation in the light of an increase in irregular immigration into the EU. The author systematises, classifies the current EU legislation on irregular immigration, and analyses the conditions, in which this legislation was developed. Using the legislation analysis method, the author proposes the following system of EU legislation on irregular immigration: rules preventing assistance to irregular immigration, rules preventing employment of irregular immigrants, rules on the return of irregular migrants and readmission, rules on border control, and rules on collaboration with third countries. The author pays special attention to analysing the current state of irregular immigration to the EU, which was dubbed the ‘greatest migration crisis in Europe’. The conclusion is that the European Union succeeded in the development of pioneering legislation on irregular immigration, which can serve as the basis for reception by other states. However, changes in the political and economic situation in the EU’s southern borderlands made the current legal mechanisms incapable of withstanding new threats. It necessitates a radical reform of the legislation on irregular immigration.
Parallel Handling of Integrity Constraints
Grefen, P.W.P.J.; Flokstra, Jan; Apers, Peter M.G.
1990-01-01
Integrity constraints form an important part of a data model. Therefore, a complete integrity constraint handling subsystem is considered an important part of any modern DBMS. In implementing an integrity constraint handling subsystem, there are two major problem areas: providing enough functionalit
Assessment of Issue Handling Efficiency
Luijten, B.; Visser, J.; Zaidman, A.
2013-01-01
We mined the issue database of GNOME to assess how issues are handled. How many issues are submitted and resolved? Does the backlog grow or decrease? How fast are issues resolved? Does issue resolution speed increase or decrease over time? In which subproject are issues handled most efficiently? To
Assessment of Issue Handling Efficiency
Luijten, B.; Visser, J.; Zaidman, A.
2013-01-01
We mined the issue database of GNOME to assess how issues are handled. How many issues are submitted and resolved? Does the backlog grow or decrease? How fast are issues resolved? Does issue resolution speed increase or decrease over time? In which subproject are issues handled most efficiently? To
Statistical detection of systematic election irregularities
Klimek, Peter; Yegorov, Yuri; Hanel, Rudolf; Thurner, Stefan
2012-01-01
Democratic societies are built around the principle of free and fair elections, and that each citizen’s vote should count equally. National elections can be regarded as large-scale social experiments, where people are grouped into usually large numbers of electoral districts and vote according to their preferences. The large number of samples implies statistical consequences for the polling results, which can be used to identify election irregularities. Using a suitable data representation, we find that vote distributions of elections with alleged fraud show a kurtosis substantially exceeding the kurtosis of normal elections, depending on the level of data aggregation. As an example, we show that reported irregularities in recent Russian elections are, indeed, well-explained by systematic ballot stuffing. We develop a parametric model quantifying the extent to which fraudulent mechanisms are present. We formulate a parametric test detecting these statistical properties in election results. Remarkably, this technique produces robust outcomes with respect to the resolution of the data and therefore, allows for cross-country comparisons. PMID:23010929
2008-02-15
penicillin -susceptible and peni- cillin-resistant Streptococcnspneuttmoniae serotypes in Canada. J Infect Dis Streptococcus pneumoniae Surveillance Group...Gray for the Streptococcus pneumonia Surveillance Group Report No. 00-44 Approved for public release; distribution unlimited. NAVAL HEALTH RESEARCH...Defense Surveillance for Invasive Streptococcus pneumoniae : Antibiotic Resistance, Serotype Distribution, and Arbitrarily Primed Polymerase Chain
Sagis, L.M.C.
2001-01-01
In this paper we developed an expression for the coefficient for plane-parallel diffusion for an arbitrarily curved fluid–fluid interface. The expression is valid for ordinary diffusion in binary mixtures, with isotropic bulk phases and an interfacial region that is isotropic in the plane parallel t
Zandvliet, Henricus J.W.
2015-01-01
We have derived within the framework of a solid-on-solid model with anisotropic nearest-neighbor interactions an exact expression for the free energy of an arbitrarily oriented step edge or boundary on a rectangular two-dimensional lattice. The full angular dependence of the step free energy allows
IRREGULAR WAVELET FRAMES AND GABOR FRAMES
Ole Christensen; Sergio Favier; Felipe Zó
2001-01-01
Given g ∈ L2 (R), we consider irregular wavelet systems of theform {λ g(λj x-kb) }j z. kz, where λj ＞0 and b＞0. Sufficient conditions for the wavelet system to constitute a frame for L2(R) are given. For a class of functions g ∈ L 2 (R) we prove that certain growth conditions on {λj} will lead to frames, and that some other types of sequences exclude the frame property. We also give a sufficient condition for a Gabor system {exib(j,x)g(x-λh)}jzn,kz to be a frame.CLC Number：O17 Document ID：AAuthor Resume：Ole Christensen;E-mail: Ole. Christensen@mat. dtu. dk Sergio Favier and Felipe Zó ;e-mails : sfavier@unsl. edu. ar fzo@unsl. edu. ar References：[1]Casaza,P.G. and Christensen,O.,Weyl-Heisenberg Frames for Subspaces of L2(R),Proc.Amer. Math. Soc. ,129(2001),145-154.[2]Casazza,P.G. and Christensen,O. ,Classifying Certain Irregular Gabor Frames,preprint[2]001.[3]Christensen,O. and Lindner,A. ,Lower Bounds for Finite Wavelet and Gabor Systems,Appr. Theory and Appl.,17(2001),17-31.[4]Chui,C.K. and Shi,X. ,Inequalities of Litdewood-Paley Type for Frames and Wavelets,SIAM J. Math. Anal. ,24:1(1993),263-277.[5]Daubechies,I. ,Ten Lectures on Wavelets,SIAM,Philadelphia,1992.[6]Favier,S. and Zalik,R. ,On the Stability of Frames and Riesz Bases,Appl. Comp. Ham.Anal. ,2(1995),160-173.[7]Feichtinger,H.G. and Strohmer,T. ,(Eds.),Gabor Analysis and Algorithms : Theory and Applications,Birkhauser,1998.[8]Heil,C.E. and Walnut,D.F. ,Continuous and Discrete Wavelet Transforms,SIAM Review,31:4(1989),628-666.[9]Sun,W. and Zhou,X. ,Irregular Wavelet Frames,Science in China (Series A),43:2(2000),122-127.Manuscript Received：2001年7月10日Manuscript Revised：2001年7月23日Published：2001年9月1日
SOME NEW FINITE DIFFERENCE METHODS FOR HELMHOLTZ EQUATIONS ON IRREGULAR DOMAINS OR WITH INTERFACES.
Wan, Xiaohai; Li, Zhilin
2012-06-01
Solving a Helmholtz equation Δu + λu = f efficiently is a challenge for many applications. For example, the core part of many efficient solvers for the incompressible Navier-Stokes equations is to solve one or several Helmholtz equations. In this paper, two new finite difference methods are proposed for solving Helmholtz equations on irregular domains, or with interfaces. For Helmholtz equations on irregular domains, the accuracy of the numerical solution obtained using the existing augmented immersed interface method (AIIM) may deteriorate when the magnitude of λ is large. In our new method, we use a level set function to extend the source term and the PDE to a larger domain before we apply the AIIM. For Helmholtz equations with interfaces, a new maximum principle preserving finite difference method is developed. The new method still uses the standard five-point stencil with modifications of the finite difference scheme at irregular grid points. The resulting coefficient matrix of the linear system of finite difference equations satisfies the sign property of the discrete maximum principle and can be solved efficiently using a multigrid solver. The finite difference method is also extended to handle temporal discretized equations where the solution coefficient λ is inversely proportional to the mesh size.
Vibrations of strongly irregular or fractal resonators
Sapoval, B.; Gobron, Th.
1993-05-01
It is shown on a specific example that fractal boundary conditions drastically alter the properties of wave excitations in space. The low-frequency part of the vibration spectrum of a finite-range fractal drum is computed using an analogy between the Helmoltz equation and the diffusion equation. The irregularity of the frontier is found to influence strongly the density of states at low frequency. The fractal perimeter generates a specific screening effect. Very near the frontier, the decrease of the wave form is related directly to the behavior of the harmonic measure. The possibility of localization of the vibrations is qualitatively discussed and we show that localized modes may exist at low frequencies if the geometrical structures possess narrow paths. Possible application of these results to the interpretation of thermal properties of binary glasses is briefly discussed.
A parametric approach to irregular fatigue prediction
Erismann, T. H.
1972-01-01
A parametric approach to irregular fatigue protection is presented. The method proposed consists of two parts: empirical determination of certain characteristics of a material by means of a relatively small number of well-defined standard tests, and arithmetical application of the results obtained to arbitrary loading histories. The following groups of parameters are thus taken into account: (1) the variations of the mean stress, (2) the interaction of these variations and the superposed oscillating stresses, (3) the spectrum of the oscillating-stress amplitudes, and (4) the sequence of the oscillating-stress amplitudes. It is pointed out that only experimental verification can throw sufficient light upon possibilities and limitations of this (or any other) prediction method.
Measurement of ionospheric large-scale irregularity
韩文焌; 郑怡嘉; 张喜镇
1996-01-01
Based on the observations of a meter-wave aperture synthesis radio telescope,as the scale length of ionospheric irregularity is greatly larger than the baseline length of interferometer,the phase error induced by the output signal of interferometer due to ionosphere is proportional to the baseline length and accordingly the expressions for extracting the information about ionosphere are derived.By using the ray theory and considering that the antenna is always tracking to the radio source in astronomical observation,the wave motion expression of traveling ionospheric disturbance observed in the total electron content is also derived,which is consistent with that obtained from the conception of thin-phase screen;then the Doppler velocity due to antenna tracking is introduced.Finally the inversion analysis for the horizontal phase velocity of TID from observed data is given.
Irregular activity arises as a natural consequence of synaptic inhibition
Terman, D., E-mail: terman@math.ohio-state.edu [Department of Mathematics, The Ohio State University, Columbus, Ohio 43210 (United States); Rubin, J. E., E-mail: jonrubin@pitt.edu [Department of Mathematics, University of Pittsburgh, Pittsburgh, Pennsylvania 15260 (United States); Diekman, C. O., E-mail: diekman@njit.edu [Department of Mathematical Sciences, New Jersey Institute of Technology, Newark, New Jersey 07102 (United States)
2013-12-15
Irregular neuronal activity is observed in a variety of brain regions and states. This work illustrates a novel mechanism by which irregular activity naturally emerges in two-cell neuronal networks featuring coupling by synaptic inhibition. We introduce a one-dimensional map that captures the irregular activity occurring in our simulations of conductance-based differential equations and mathematically analyze the instability of fixed points corresponding to synchronous and antiphase spiking for this map. We find that the irregular solutions that arise exhibit expansion, contraction, and folding in phase space, as expected in chaotic dynamics. Our analysis shows that these features are produced from the interplay of synaptic inhibition with sodium, potassium, and leak currents in a conductance-based framework and provides precise conditions on parameters that ensure that irregular activity will occur. In particular, the temporal details of spiking dynamics must be present for a model to exhibit this irregularity mechanism and must be considered analytically to capture these effects.
Modelling Of Random Vertical Irregularities Of Railway Tracks
Podwórna M.
2015-08-01
Full Text Available The study presents state-of-the-art in analytical and numerical modelling of random vertical irregularities of continuously welded ballasted railway tracks. The common model of railway track irregularity vertical profiles is applied, in the form of a stationary and ergodic Gaussian process in space. Random samples of track irregularity vertical profiles are generated with the Monte-Carlo method. Based on the numerical method developed in the study, the minimum and recommended sampling number required in the random analysis of railway bridges and number of frequency increments (harmonic components in track irregularity vertical profiles simulation are determined. The lower and upper limits of wavelengths are determined based on the literature studies. The approach yields track irregularity random samples close to reality. The track irregularity model developed in the study can be used in the dynamic analysis of railway bridge / track structure / highspeed train systems.
Lunar Materials Handling System Project
National Aeronautics and Space Administration — The Lunar Materials Handling System (LMHS) is a method for transfer of lunar soil into and out of process equipment in support of in situ resource utilization...
Tritium handling in vacuum systems
Gill, J.T. [Monsanto Research Corp., Miamisburg, OH (United States). Mound Facility; Coffin, D.O. [Los Alamos National Lab., NM (United States)
1986-10-01
This report provides a course in Tritium handling in vacuum systems. Topics presented are: Properties of Tritium; Tritium compatibility of materials; Tritium-compatible vacuum equipment; and Tritium waste treatment.
Solidex 88: solids handling conference
1988-01-01
Papers are presented under the session headings: BMHB (British Materials Handling Board) - tackling user problems; feeding pneumatic conveying systems - matching the hardware to the product; and solutions to some operational problems.
Lunar Materials Handling System Project
National Aeronautics and Space Administration — The Lunar Materials Handling System (LMHS) is a method for transfer of bulk materials and products into and out of process equipment in support of lunar and Mars in...
Order Handling in Convergent Environments
Vrtanoski, Jordan
2012-01-01
The rapid development of IT&T technology had big impact on the traditional telecommunications market, transforming it from monopolistic market to highly competitive high-tech market where new services are required to be created frequently. This paper aims to describe a design approach that puts order management process (as part of enterprise application integration) in function of rapid service creation. In the text we will present a framework for collaborative order handling supporting convergent services. The design splits the order handling processes in convergent environments in three business process groups: order capture, order management and order fulfillment. The paper establishes abstract framework for order handling and provides design guidelines for transaction handling implementation based on the checkpoint and inverse command strategy. The proposed design approach is based in a convergent telecommunication environment. Same principles are applicable in solving problems of collaboration in fun...
Towards integrated microliquid handling systems
Elwenspoek, M.; Lammerink, T.S.J.; Miyake, R.; Fluitman, J.H.J.
1994-01-01
In this paper we describe components for integrated microliquid handling systems such as fluid injection analysis, and first results of planar integration of components. The components discussed are channels, passive and active valves, actuators for micropumps, micromixers, microflow sensors, optica
Decomposing Oriented Graphs into Six Locally Irregular Oriented Graphs
Bensmail, Julien; Renault, Gabriel
2016-01-01
An undirected graph G is locally irregular if every two of its adjacent vertices have distinct degrees. We say that G is decomposable into k locally irregular graphs if there exists a partition E1∪E2∪⋯∪Ek of the edge set E(G) such that each Ei induces a locally irregular graph. It was recently co...
The Analysis and Creation of Track Irregularities Using TRAKVU
1998-01-01
The accuracy of the results from a rail vehicle dynamic model is dependent on the realism of the track input to the model. An important part of the track input is the irregularities that exist on actual track. This study analyzes the irregularities inherent in railroad track geometry data, and provides an analytical method for creating track data with the irregularities for use as the input to a dynamic model. Track data, measured from various classes of track, was ...
Grain Handling and Storage Safety
Webster, Jill, Ph.D.
2005-01-01
Agricultural Health and Safety Fact Sheet AHS-02 Grain Handling and Storage Safety Jill Webster Ph.D., S. Christian Mariger, Graduate Assistant Agricultural Systems Technology and Education There are several hazards that should be considered when working with grain. Storage structures, handling equipment, and the grain itself have all caused serious injuries and deaths. Storage structures (bins, silos, and granaries), like all confined spaces, have significant hazards associated with them. Be...
Civilsamfundets ABC: H for Handling
Lund, Anker Brink; Meyer, Gitte
2015-01-01
Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling.......Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling....
Exploring arbitrarily high orders of optimized perturbation theory in QCD with nf→1612
P.M. Stevenson
2016-09-01
Full Text Available Perturbative QCD with nf flavours of massless quarks becomes simple in the hypothetical limit nf→1612, where the leading β-function coefficient vanishes. The Banks–Zaks (BZ expansion in a0≡8321(1612−nf is straightforward to obtain from perturbative results in MS‾ or any renormalization scheme (RS whose nf dependence is ‘regular’. However, ‘irregular’ RS's are perfectly permissible and should ultimately lead to the same BZ results. We show here that the ‘optimal’ RS determined by the Principle of Minimal Sensitivity does yield the same BZ-expansion results when all orders of perturbation theory are taken into account. The BZ limit provides an arena for exploring optimized perturbation theory at arbitrarily high orders. These explorations are facilitated by a ‘master equation’ expressing the optimization conditions in the fixed-point limit. We find an intriguing strong/weak coupling duality a→a⁎2/a about the fixed point a⁎.
A Study of Force and Position Tracking Control for Robot Contact with an Arbitrarily Inclined Plane
Ye Bosheng
2013-01-01
Full Text Available This paper proposes an adaptive impedance control method for a robot’s end‐effector while it slides steadily on an arbitrarily inclined panel; it concentrates on robot force position tracking control for the inclined plane with an unknown normal direction and varying environmental damping and stiffness. The proposed control strategy uses the Recursive Least Squares (RLS algorithm to estimate environmental damping and stiffness parameters during the impact‐contact process between the robot and the environment. It achieves the expected posture adjustment of the robot’s end‐effector based on the measured contact torques and, during the robot’s end‐ effectorʹs sliding on the inclined plane, a fuzzy control is developed to adjust the robot impedance model parameters on‐line and adaptively for changes in environmental damping and stiffness. The designed robot force position control method is robust to the changes of the environmental parameters but the implementation of the proposed control algorithms is simple. Finally, experiments demonstrate the effectiveness of the proposed method.
Electromagnetic scattering from two parallel 2D targets arbitrarily located in a Gaussian beam
Wang Yun-Hua; Guo Li-Xin; Wu Qiong
2006-01-01
In this paper based on the equivalence principle and the reciprocity theorem, the scattered field up to second-order by two parallel 2D targets arbitrarily located in a Gaussian beam is considered. The first-order solution can easily be obtained by calculating the scattered field from isolated targets when illuminated by a Gaussian beam. However, because of the difficulty in formulating the couple scattering field, it is almost impossible to find an analytical solution for the second-order scattered field if the shapes of 2D targets are not canonical geometries. In order to overcome this problem, in this paper, the second-order solution is derived by using the technique based on the reciprocity theorem and the equivalence principle. Meanwhile, the relation between the secondary scattered field from target #1 and target #2 is obtained. Specifically, the bi- and mono-static scattering of Gaussian beam by two parallel adjacent inhomogeneous plasma-coated conducting circular cylinders is calculated and the dependence of attenuation of the scattering width on the thickness of the coated layer, electron number density, collision frequency and radar frequency is discussed in detail.
Digital Image Watermarking for Arbitrarily Shaped Objects Based On SA-DWT
Essaouabi, A; Fegragui, F
2009-01-01
Many image watermarking schemes have been proposed in recent years, but they usually involve embedding a watermark to the entire image without considering only a particular object in the image, which the image owner may be interested in. This paper proposes a watermarking scheme that can embed a watermark to an arbitrarily shaped object in an image. Before embedding, the image owner specifies an object of arbitrary shape that is of a concern to him. Then the object is transformed into the wavelet domain using in place lifting shape adaptive DWT(SADWT) and a watermark is embedded by modifying the wavelet coefficients. In order to make the watermark robust and transparent, the watermark is embedded in the average of wavelet blocks using the visual model based on the human visual system. Wavelet coefficients n least significant bits (LSBs) are adjusted in concert with the average. Simulation results shows that the proposed watermarking scheme is perceptually invisible and robust against many attacks such as loss...
Boche, H., E-mail: boche@tum.de, E-mail: janis.noetzel@tum.de; Nötzel, J., E-mail: boche@tum.de, E-mail: janis.noetzel@tum.de [Lehrstuhl für Theoretische Informationstechnik, Technische Universität München, 80290 München (Germany)
2014-12-15
This work is motivated by a quite general question: Under which circumstances are the capacities of information transmission systems continuous? The research is explicitly carried out on finite arbitrarily varying quantum channels (AVQCs). We give an explicit example that answers the recent question whether the transmission of messages over AVQCs can benefit from assistance by distribution of randomness between the legitimate sender and receiver in the affirmative. The specific class of channels introduced in that example is then extended to show that the unassisted capacity does have discontinuity points, while it is known that the randomness-assisted capacity is always continuous in the channel. We characterize the discontinuity points and prove that the unassisted capacity is always continuous around its positivity points. After having established shared randomness as an important resource, we quantify the interplay between the distribution of finite amounts of randomness between the legitimate sender and receiver, the (nonzero) probability of a decoding error with respect to the average error criterion and the number of messages that can be sent over a finite number of channel uses. We relate our results to the entanglement transmission capacities of finite AVQCs, where the role of shared randomness is not yet well understood, and give a new sufficient criterion for the entanglement transmission capacity with randomness assistance to vanish.
Evaluation of zoonotic potency of Escherichia coli O157:H7 through arbitrarily primed PCR methods
I Wayan Suardana; Dyah Ayu Widiasih; I Gusti Ngurah Kade Mahardika; Komang Januartha Putra Pinatih; Budi Setiadi Daryono
2015-01-01
Objective:To evaluate the zoonotic potency of Escherichia coli O157:H7 through arbitrarily primed-PCR (AP-PCR) methods as one of the DNA fingerprinting methods. Methods:A total of 14 isolates consisted of 11 isolates originated from human feces with renal failure symptoms, 2 isolates originated from cattle feces, and 1 control isolate were used in this study. DNA of each isolate was extracted, and their profiles were studied by using AP-PCR method with M13 F and M13 R arbitrary primers. Results:The results founded that all of 14 isolates had similarity range from 54.6%to 88.5%. Isolates KL-106(3) and KL-55(6) originated from humans showed the degree of similarity with isolates SM-25(1) and SM-7(1) originated from cattle as high as 85%and 77%, respectively. Conclusions:The high degree of similarity between isolates originated from cattle and human indicated the high potency of zoonoses. The results also concluded AP-PCR method as a briefly fingerprinting method in order to trace the epidemiological of E. coli O157:H7.
Evaluation of zoonotic potency of Escherichia coli O157:H7 through arbitrarily primed PCR methods
I; Wayan; Suardana; Dyah; Ayu; Widiasih; I; Gusti; Ngurah; Kade; Mahardika; Komang; Januartha; Putra; Pinatih; Budi; Setiadi; Daryono
2015-01-01
Objective: To evaluate the zoonotic potency of Escherichia coli O157:H7 through arbitrarily primed-PCR(AP-PCR) methods as one of the DNA fingerprinting methods.Methods: A total of 14 isolates consisted of 11 isolates originated from human feces with renal failure symptoms, 2 isolates originated from cattle feces, and 1 control isolate were used in this study. DNA of each isolate was extracted, and their pro files were studied by using AP-PCR method with M13 F and M13 R arbitrary primers.Results: The results founded that all of 14 isolates had similarity range from 54.6% to88.5%. Isolates KL-106(3) and KL-55(6) originated from humans showed the degree of similarity with isolates SM-25(1) and SM-7(1) originated from cattle as high as 85% and77%, respectively.Conclusions: The high degree of similarity between isolates originated from cattle and human indicated the high potency of zoonoses. The results also concluded AP-PCR method as a brie fly fingerprinting method in order to trace the epidemiological of E. coli O157:H7.
Effects of Arbitrarily Directed Field on Spin Phase Oscillations in Biaxial Molecular Magnets
HU Hui; ZHU JiaLin; LU Rong; XIONG JiaJiong
2001-01-01
Quantum phase interference and spin-parity effects are studied in biaxial molecular magnets in a magnetic field at an arbitrarily directed angle. The calculations of the ground-state tunnel splitting are performed on the basis of the instanton technique in the spin-coherent-state path-integral representation, and complemented by exactly numerical diagonalization. Both the Wentzel-Kramers-Brillouin exponent and the pre-exponential factor are obtained for the entire region of the direction of the field. Our results show that the tunnel splitting oscillates with the field for the small field angle, while for the large field angle the oscillation is completely suppressed. This distinct angular dependence, together with the dependence of the tunnel splitting on the field strength, provides an independent test for spin-parity effects in biaxial molecular magnets. The analytical results for the molecular Fes magnet are found to be in good agreement with the numerical simulations, which suggests that even the molecular magnet with total spin S = 10 is large enough to be treated as a giant spin system.``
3D time-domain airborne EM modeling for an arbitrarily anisotropic earth
Yin, Changchun; Qi, Yanfu; Liu, Yunhe
2016-08-01
Time-domain airborne EM data is currently interpreted based on an isotropic model. Sometimes, it can be problematic when working in the region with distinct dipping stratifications. In this paper, we simulate the 3D time-domain airborne EM responses over an arbitrarily anisotropic earth with topography by edge-based finite-element method. Tetrahedral meshes are used to describe the abnormal bodies with complicated shapes. We further adopt the Backward Euler scheme to discretize the time-domain diffusion equation for electric field, obtaining an unconditionally stable linear equations system. We verify the accuracy of our 3D algorithm by comparing with 1D solutions for an anisotropic half-space. Then, we switch attentions to effects of anisotropic media on the strengths and the diffusion patterns of time-domain airborne EM responses. For numerical experiments, we adopt three typical anisotropic models: 1) an anisotropic anomalous body embedded in an isotropic half-space; 2) an isotropic anomalous body embedded in an anisotropic half-space; 3) an anisotropic half-space with topography. The modeling results show that the electric anisotropy of the subsurface media has big effects on both the strengths and the distribution patterns of time-domain airborne EM responses; this effect needs to be taken into account when interpreting ATEM data in areas with distinct anisotropy.
Digital Image Watermarking for Arbitrarily Shaped Objects Based On SA-DWT
F. Regragui
2009-10-01
Full Text Available Many image watermarking schemes have been proposed in recent years, but they usually involve embedding a watermark to the entire image without considering only a particular object in the image, which the image owner may be interested in. This paper proposes a watermarking scheme that can embed a watermark to an arbitrarily shaped object in an image. Before embedding, the image owner specifies an object of arbitrary shape that is of a concern to him. Then the object is transformed into the wavelet domain using in place lifting shape adaptive DWT(SADWT and a watermark is embedded by modifying the wavelet coefficients. In order to make the watermark robust and transparent, the watermark is embedded in the average of wavelet blocks using the visual model based on the human visual system. Wavelet coefficients n least significant bits (LSBs are adjusted in concert with the average. Simulation results shows that the proposed watermarking scheme is perceptually invisible and robust against many attacks such as lossy compression (e.g. JPEG, JPEG2000, scaling, adding noise, filtering, etc.
Jo, Wonhyuk [Department of Physics, Soongsil University, Seoul 156-743 (Korea, Republic of); Lee, Sooheyong, E-mail: sooheyong@gmail.com [Korea Research Institute of Standards and Science, Daejeon 305-600 (Korea, Republic of); Eom, Intae, E-mail: neplus@postech.ac.kr [Pohang Accelerator Laboratory, Pohang 790-784 (Korea, Republic of); Landahl, Eric C. [Department of Physics, DePaul University, Chicago, Illinois 60614 (United States)
2014-12-15
The ability to synchronize a femtosecond laser to x-ray pulses is crucial for performing ultrafast time-resolved x-ray scattering experiments at synchrotrons. Conventionally, the task has been achieved by locking a harmonic frequency of the laser oscillator to the storage ring master radio-frequency (RF). However, when the frequency mismatch between the two sources cannot be compensated by small adjustments to the laser cavity length, synchronization to a harmonic frequency requires modifying the optical components of the laser system. We demonstrate a novel synchronization scheme, which is a flexible alternative for synchronizing these two sources operating at arbitrarily different frequencies. First, we find the greatest common divisor (GCD) of the two frequencies that is still within the limited tuning range of the laser cavity length. The GCD is generated by dividing down from the storage ring RF, and is separately multiplied up to provide a feedback signal for synchronizing the laser cavity. Unique to our scheme, the GCD also serves as a harmonic RF source for the laser amplifier such that only laser oscillator pulses at fixed integer multiples of the storage ring RF are selected for amplification and delivery to experiments. Our method is implemented at the Photon Test Facility beamline of Pohang Light Source where timing-jitter less than 4 ps (r.m.s.) is measured using a new shot-to-shot method.
Tomo-PIV measurement of flow around an arbitrarily moving body with surface reconstruction
Im, Sunghyuk; Jeon, Young Jin; Sung, Hyung Jin
2015-02-01
A three-dimensional surface of an arbitrarily moving body in a flow field was reconstructed using the DAISY descriptor and epipolar geometry constraints. The surface shape of a moving body was reconstructed with tomographic PIV flow measurement. Experimental images were captured using the tomographic PIV system, which consisted of four high-speed cameras and a laser. The originally captured images, which contained the shape of the arbitrary moving body and the tracer particles, were separated into the particle and surface images using a Gaussian smoothing filter. The weak contrast of the surface images was enhanced using a local histogram equalization method. The histogram-equalized surface images were used to reconstruct the surface shape of the moving body. The surface reconstruction method required a sufficiently detailed surface pattern to obtain the intensity gradient profile of the local descriptor. The separated particle images were used to reconstruct the particle volume intensity via tomographic reconstruction approaches. Voxels behind the reconstructed body surface were neglected during the tomographic reconstruction and velocity calculation. The three-dimensional three-component flow vectors were calculated based on the cross-correlation functions between the reconstructed particle volumes. Three-dimensional experiments that modeled the flows around a flapping flag, a rotating cylinder, and a flapping robot fish tail were conducted to validate the present technique.
Boche, H.; Nötzel, J.
2014-12-01
This work is motivated by a quite general question: Under which circumstances are the capacities of information transmission systems continuous? The research is explicitly carried out on finite arbitrarily varying quantum channels (AVQCs). We give an explicit example that answers the recent question whether the transmission of messages over AVQCs can benefit from assistance by distribution of randomness between the legitimate sender and receiver in the affirmative. The specific class of channels introduced in that example is then extended to show that the unassisted capacity does have discontinuity points, while it is known that the randomness-assisted capacity is always continuous in the channel. We characterize the discontinuity points and prove that the unassisted capacity is always continuous around its positivity points. After having established shared randomness as an important resource, we quantify the interplay between the distribution of finite amounts of randomness between the legitimate sender and receiver, the (nonzero) probability of a decoding error with respect to the average error criterion and the number of messages that can be sent over a finite number of channel uses. We relate our results to the entanglement transmission capacities of finite AVQCs, where the role of shared randomness is not yet well understood, and give a new sufficient criterion for the entanglement transmission capacity with randomness assistance to vanish.
Start-up of electrophoresis of an arbitrarily oriented dielectric cylinder.
Chen, Guan Y; Keh, Huan J
2014-09-01
An analytical study is presented for the transient electrophoretic response of a circular cylindrical particle to the step application of an electric field. The electric double layer adjacent to the particle surface is thin but finite compared with the radius of the particle. The time-evolving electroosmotic velocity at the outer boundary of the double layer is utilized as a slip condition so that the transient momentum conservation equation for the bulk fluid flow is solved. Explicit formulas for the unsteady electrophoretic velocity of the particle are obtained for both axially and transversely applied electric fields, and can be linearly superimposed for an arbitrarily-oriented applied field. If the cylindrical particle is neutrally buoyant in the suspending fluid, the transient electrophoretic velocity is independent of the orientation of the particle relative to the applied electric field and will be in the direction of the applied field. If the particle is different in density from the fluid, then the direction of electrophoresis will not coincide with that of the applied field until the steady state is attained. The growth of the electrophoretic mobility with the elapsed time for a cylindrical particle is substantially slower than for a spherical particle.
A two-level parallel direct search implementation for arbitrarily sized objective functions
Hutchinson, S.A.; Shadid, N.; Moffat, H.K. [Sandia National Labs., Albuquerque, NM (United States)] [and others
1994-12-31
In the past, many optimization schemes for massively parallel computers have attempted to achieve parallel efficiency using one of two methods. In the case of large and expensive objective function calculations, the optimization itself may be run in serial and the objective function calculations parallelized. In contrast, if the objective function calculations are relatively inexpensive and can be performed on a single processor, then the actual optimization routine itself may be parallelized. In this paper, a scheme based upon the Parallel Direct Search (PDS) technique is presented which allows the objective function calculations to be done on an arbitrarily large number (p{sub 2}) of processors. If, p, the number of processors available, is greater than or equal to 2p{sub 2} then the optimization may be parallelized as well. This allows for efficient use of computational resources since the objective function calculations can be performed on the number of processors that allow for peak parallel efficiency and then further speedup may be achieved by parallelizing the optimization. Results are presented for an optimization problem which involves the solution of a PDE using a finite-element algorithm as part of the objective function calculation. The optimum number of processors for the finite-element calculations is less than p/2. Thus, the PDS method is also parallelized. Performance comparisons are given for a nCUBE 2 implementation.
Freeman, S.; Rodriguez, R.J.
1995-01-01
A collection of 39 isolates of Colletotrichum acutatum, C. fragariae and C. gloeosporioides, which cause anthracnose on strawberry, was grouped into species based on the arbitrarily primed polymerase chain reaction (ap-PCR). All isolates used had previously been identified according to classical taxonomic morphology. Ap-PCR amplification of genomic DNA using four different primers allowed for reliable differentiation between isolates of C. acutatum, C. fragariae and two genotypes of C. gloeosporioides. Fifteen of the 18 C. acutatum isolates were very similar, although three isolates which produced a red pigment had distinctly different banding patterns. Nearly identical banding patterns were observed for all nine isolates of C. fragariae. The 12 C. gloeosporioides isolates were more diverse and two separate genotypes, Cgl-1 (six isolates) and Cgl-2 (five isolates) were distinguished by ap-PCR. An additional isolate did not conform to either the Cgl-1 or Cgl-2 genotypes. The utility of ap-PCR compared with other molecular techniques for reliable identification of Colletotrichum isolates pathogenic on strawberry is discussed.
Arbitrarily primed PCR- A rapid and simple method for typing of leptospiral serovars
Ramadass P
2002-01-01
Full Text Available PURPOSE: To investigate the use of arbitrarily primed polymerase chain reaction (AP-PCR for typing of leptospiral serovars. METHODS: AP-PCR was adopted for identification of laboratory strains of leptospires and leptospiral cultures at serovar level. A primer of 12 bp was used for amplifying DNA of 13 laboratory strains of leptospires as well as culture pellets of leptospires. RESULTS: Each serovar produced distinct DNA fingerprint which was characteristic for each serovar. These patterns were used for typing of 81 serum culture samples obtained from human leptospiral cases. Of these samples, 39 could be typed based on AP-PCR fingerprints belonging to serovars autumnalis, pomona, canicola, javanica, icterohaemorrhagiae, patoc and pyrogenes. These results were confirmed by RAPD fingerprinting of the DNA samples of the respective leptospiral serovars after culturing -FNx01them in EMJH media. One of the important findings of this work was that straight culture sample could be used for AP-PCR assay, without purification of DNA. By having more number of AP-PCR reference fingerprints, more serovars could be typed. CONCLUSIONS: AP-PCR technique provides great potential for simple and rapid identification of leptospires at serovar level, which could be useful in molecular epidemiological studies of leptospirosis.
Mendez V, J. [Departamento de Radioterapia, Instituto de Enfermedades Neoplasicas, Avenida Angamos Este 2520, Lima 34 (Peru)
1998-12-31
In this work it is presented an advance in Electron dosimetry of irregular fields for beams emitted by linear accelerators. At present diverse methods exist which are coming to apply in the Radiotherapy centers. In this work it is proposed a method for irregular fields dosimetry. It will be allow to calculate the dose rate absorbed required for evaluating the time for the treatment of cancer patients. Utilizing the results obtained by the dosimetric system, it has been possible to prove the validity of the method describe for 12 MeV energy and for square field 7.5 x 7.5 cm{sup 2} with percentile error less than 1 % . (Author)
Beltran, Jorge I. LLagostera; Trevisan, Osvair Vidal [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia
1990-12-31
Natural convection flow induced by heating from below in a irregular porous cavity is investigated numerically. The influence of the modified Rayleigh number and geometric ratios on heat transfer and fluid flow is studied. Global and local Nusselt for Rayleigh numbers covering the range 0 - 1600 and for several geometric ratios. The fluid flow and the temperature field are illustrated by contour maps. (author) 6 refs., 10 figs., 7 tabs.
Síndrome HaNDL / HaNDL Syndrome / Síndrome HaNDL
Camilo Ernesto Barros-Gutiérrez, MD., Esp.
2015-03-01
Full Text Available Introducción: El Síndrome HaNDL (Headache and neurologic deficits with cerebroespinal fluid lymphocytosis por sus siglas en inglés, es una patología que cursa con cefalea, focalización neurológica y linfocitosis en el líquido cefalorraquídeo. Objetivo: este artículo busca presentar un caso de Síndrome de HaNDL, puesto que esta condición nosológica implica un reto diagnóstico. Resultados y conclusiones: Se presenta el caso de un paciente con diagnóstico de síndrome de HaNDL los hallazgos al examen físico y del líquido cefalorraquídeo. [Barros-Gutiérrez CE, Silva-Monsalve E, Gualtero-Trujillo S. Síndrome HaNDL. MedUNAB 2015; 17(3: xx-xx]. Introduction: The syndrome of transient Headache and Neurological Deficits with cerebrospinal fluid Lymphocytosis, is a pathology that presents cephalalgia, neurological focalization and lymphocytes in the cerebrospinal fluid. Objective: This article presents a HaNDL Syndrome case, since this nosological condition implies a diagnostic challenge. Results and conclusions: A case of a patient with HaNDL syndrome diagnosis, physical examination findings and cerebrospinal fluid are presented. [Barros-Gutiérrez CE, Silva-Monsalve E, Gualtero-Trujillo S. HaNDL Syndrome. MedUNAB 2015; 17(3: xx-xx]. Introdução: A síndrome de HaNDL (Headache and neurologic déficits with cerebrospinal fluid lymphocytosis por sua sigla em inglês é uma doença que causa dor de cabeça, foco neurológico e linfocitose no líquido cefalorraquidiano. Objetivo: Este artigo tem como objetivo apresentar um caso de Síndrome de HaNDL, uma vez que esta condição nosológica envolve um desafio diagnóstico. Resultados e conclusões: Apresenta-se o caso de um paciente diagnosticado com a síndrome de HaNDL, o encontrado no exame físico e o líquido cefalorraquidiano. [Barros-Gutiérrez CE, Silva-Monsalve E, Gualtero-Trujillo S. Síndrome HaNDL. MedUNAB 2015; 17(3: xx-xx].
A new Monte Carlo code for simulation of the effect of irregular surfaces on X-ray spectra
Brunetti, Antonio, E-mail: brunetti@uniss.it; Golosio, Bruno
2014-04-01
Generally, quantitative X-ray fluorescence (XRF) analysis estimates the content of chemical elements in a sample based on the areas of the fluorescence peaks in the energy spectrum. Besides the concentration of the elements, the peak areas depend also on the geometrical conditions. In fact, the estimate of the peak areas is simple if the sample surface is smooth and if the spectrum shows a good statistic (large-area peaks). For this reason often the sample is prepared as a pellet. However, this approach is not always feasible, for instance when cultural heritage or valuable samples must be analyzed. In this case, the sample surface cannot be smoothed. In order to address this problem, several works have been reported in the literature, based on experimental measurements on a few sets of specific samples or on Monte Carlo simulations. The results obtained with the first approach are limited by the specific class of samples analyzed, while the second approach cannot be applied to arbitrarily irregular surfaces. The present work describes a more general analysis tool based on a new fast Monte Carlo algorithm, which is virtually able to simulate any kind of surface. At the best of our knowledge, it is the first Monte Carlo code with this option. A study of the influence of surface irregularities on the measured spectrum is performed and some results reported. - Highlights: • We present a fast Monte Carlo code with the possibility to simulate any irregularly rough surfaces. • We show applications to multilayer measurements. • Real time simulations are available.
Tool handling robot system; Tool handling robot system
NONE
1999-03-10
As an example of the delivery of industrial use automation equipment by Meidensha Corp., the paper introduced a tool handling robot system. The system is a tool handling robot of case processing use FMS (flexible manufacturing system). This is a system which exchanges tool automatically according to the From To order from the managing computer using the ceiling running robot between five horizontal type machining centers and more than 800 collective tool stockers. The structure of the system is as follows: tool handling robot (MHR-400), robot controller (meirocs-F), tool hand, robot running unit, tool stocker (for 844 tools), five life tool exchange trucks, tool truck lifting unit, system control panel. (NEDO)
Regmi, Rajesh; Lovelock, D. Michael; Hunt, Margie; Zhang, Pengpeng; Pham, Hai; Xiong, Jianping; Yorke, Ellen D.; Mageras, Gig S., E-mail: magerasg@mskcc.org [Department of Medical Physics, Memorial Sloan-Kettering Cancer Center, New York, New York 10065 (United States); Goodman, Karyn A.; Rimner, Andreas [Department of Radiation Oncology, Memorial Sloan-Kettering Cancer Center, New York, New York 10065 (United States); Mostafavi, Hassan [Ginzton Technology Center, Varian Medical Systems, Palo Alto, California 94304 (United States)
2014-07-15
Purpose: Certain types of commonly used fiducial markers take on irregular shapes upon implantation in soft tissue. This poses a challenge for methods that assume a predefined shape of markers when automatically tracking such markers in kilovoltage (kV) radiographs. The authors have developed a method of automatically tracking regularly and irregularly shaped markers using kV projection images and assessed its potential for detecting intrafractional target motion during rotational treatment. Methods: Template-based matching used a normalized cross-correlation with simplex minimization. Templates were created from computed tomography (CT) images for phantom studies and from end-expiration breath-hold planning CT for patient studies. The kV images were processed using a Sobel filter to enhance marker visibility. To correct for changes in intermarker relative positions between simulation and treatment that can introduce errors in automatic matching, marker offsets in three dimensions were manually determined from an approximately orthogonal pair of kV images. Two studies in anthropomorphic phantom were carried out, one using a gold cylindrical marker representing regular shape, another using a Visicoil marker representing irregular shape. Automatic matching of templates to cone beam CT (CBCT) projection images was performed to known marker positions in phantom. In patient data, automatic matching was compared to manual matching as an approximate ground truth. Positional discrepancy between automatic and manual matching of less than 2 mm was assumed as the criterion for successful tracking. Tracking success rates were examined in kV projection images from 22 CBCT scans of four pancreas, six gastroesophageal junction, and one lung cancer patients. Each patient had at least one irregularly shaped radiopaque marker implanted in or near the tumor. In addition, automatic tracking was tested in intrafraction kV images of three lung cancer patients with irregularly shaped
Ionospheric irregularities at Antarctic using GPS measurements
Sunita Tiwari; Amit Jain; Shivalika Sarkar; Sudhir Jain; A K Gwal
2012-04-01
The purpose of this work is to study the behaviour of the ionospheric scintillation at high latitude during geomagnetically quiet and disturbed conditions which is one of the most relevant themes in the space weather studies. Scintillation is a major problem in navigation application using GPS and in satellite communication at high latitudes. Severe amplitude fading and strong scintillation affect the reliability of GPS navigational system and satellite communication. To study the effects of the ionospheric scintillations, GPS receiver installed at Antarctic station Maitri (Geog. 70.76°S; 11.74°E) was used. The data is collected by using GISTM 4004A, NOVATEL’S GPS receiver during March 2008. Studies show that percentage occurrence of phase scintillation is well correlated with geomagnetic activity during the observation period. The result also shows that very intense scintillations can degrade GPS based location determination due to loss of lock of satellites. These findings indicate that the dependence of scintillations and irregularity occurrence on geomagnetic activity is associated with the magnetic local time (MLT). Large number of patches are reported and their activity depends on the magnetic activity index.
Multiresolution Analysis Adapted to Irregularly Spaced Data
Anissa Mokraoui
2009-01-01
Full Text Available This paper investigates the mathematical background of multiresolution analysis in the specific context where the signal is represented by irregularly sampled data at known locations. The study is related to the construction of nested piecewise polynomial multiresolution spaces represented by their corresponding orthonormal bases. Using simple spline basis orthonormalization procedures involves the construction of a large family of orthonormal spline scaling bases defined on consecutive bounded intervals. However, if no more additional conditions than those coming from multiresolution are imposed on each bounded interval, the orthonormal basis is represented by a set of discontinuous scaling functions. The spline wavelet basis also has the same problem. Moreover, the dimension of the corresponding wavelet basis increases with the spline degree. An appropriate orthonormalization procedure of the basic spline space basis, whatever the degree of the spline, allows us to (i provide continuous scaling and wavelet functions, (ii reduce the number of wavelets to only one, and (iii reduce the complexity of the filter bank. Examples of the multiresolution implementations illustrate that the main important features of the traditional multiresolution are also satisfied.
Irregular Homogeneity Domains in Ternary Intermetallic Systems
Jean-Marc Joubert
2015-12-01
Full Text Available Ternary intermetallic A–B–C systems sometimes have unexpected behaviors. The present paper examines situations in which there is a tendency to simultaneously form the compounds ABx, ACx and BCx with the same crystal structure. This causes irregular shapes of the phase homogeneity domains and, from a structural point of view, a complete reversal of site occupancies for the B atom when crossing the homogeneity domain. This work reviews previous studies done in the systems Fe–Nb–Zr, Hf–Mo–Re, Hf–Re–W, Mo–Re–Zr, Re–W–Zr, Cr–Mn–Si, Cr–Mo–Re, and Mo–Ni–Re, and involving the topologically close-packed Laves, χ and σ phases. These systems have been studied using ternary isothermal section determination, DFT calculations, site occupancy measurement using joint X-ray, and neutron diffraction Rietveld refinement. Conclusions are drawn concerning this phenomenon. The paper also reports new experimental or calculated data on Co–Cr–Re and Fe–Nb–Zr systems.
Design strategies for irregularly adapting parallel applications
Oliker, Leonid; Biswas, Rupak; Shan, Hongzhang; Sing, Jaswinder Pal
2000-11-01
Achieving scalable performance for dynamic irregular applications is eminently challenging. Traditional message-passing approaches have been making steady progress towards this goal; however, they suffer from complex implementation requirements. The use of a global address space greatly simplifies the programming task, but can degrade the performance of dynamically adapting computations. In this work, we examine two major classes of adaptive applications, under five competing programming methodologies and four leading parallel architectures. Results indicate that it is possible to achieve message-passing performance using shared-memory programming techniques by carefully following the same high level strategies. Adaptive applications have computational work loads and communication patterns which change unpredictably at runtime, requiring dynamic load balancing to achieve scalable performance on parallel machines. Efficient parallel implementations of such adaptive applications are therefore a challenging task. This work examines the implementation of two typical adaptive applications, Dynamic Remeshing and N-Body, across various programming paradigms and architectural platforms. We compare several critical factors of the parallel code development, including performance, programmability, scalability, algorithmic development, and portability.
Over rough and smooth : Amputee gait on an irregular surface
Curtze, C.; Hof, A.L.; Postema, K.; Otten, B.
2011-01-01
When negotiating irregular surfaces, the control of dynamic stability is challenged. In this study, we compared the adjustments in stepping behaviour and arm-swing of 18 unilateral transtibial amputees and 17 able-bodied participants when walking on flat and irregular surfaces. Experimental findings
Edge-partitioning graphs into regular and locally irregular components
Bensmail, Julien; Stevens, Brett
2016-01-01
A graph is locally irregular if every two adjacent vertices have distinct degrees. Recently, Baudon et al. introduced the notion of decomposition into locally irregular subgraphs. They conjectured that for almost every graph G, there exists a minimum integer χ'irr(G) such that G admits an edge-pa...
Gong, Yu-Bin; Wei, Yan-Yu; Liu, Hong-Tao
2010-12-01
The dielectric-rod is loaded on the central axis of the arbitrarily-shaped helical groove slow-wave structure. Meanwhile, the profile of the groove is replaced by a series of continuous rectangular steps. The unified dispersion equation of the arbitrarily-shaped helical groove waveguide loaded with a concentric dielectric-rod is obtained by means of a combination of filed-matching method and admittance-matching technique. Then, the effect of the change of groove shape and the dielectric-rod parameters on the dispersion and coupling impedance is approached by theory calculation. The results show that: loaded with dielectric-rod, the bandwidth of the helical groove traveling wave tube (TWT) is effectively broadened, but the coupling impedance is reduced. Among the five different groove shapes, the triangle-type groove has the widest bandwidth but the smallest coupling impedance, and the swallow-tailed-type groove has the narrowest bandwidth but the largest coupling impedance.
Compact stars in the braneworld: A new branch of stellar configurations with arbitrarily large mass
Lugones, Germán; Arbañil, José D. V.
2017-03-01
We study the properties of compact stars in the Randall-Sundrum type-II braneworld (BW) model. To this end, we solve the braneworld generalization of the stellar structure equations for a static fluid distribution with spherical symmetry considering that the spacetime outside the star is described by a Schwarzschild metric. First, the stellar structure equations are integrated employing the so-called causal limit equation of state (EOS), which is constructed using a well-established EOS at densities below a fiducial density, and the causal EOS P =ρ above it. It is a standard procedure in general relativistic stellar structure calculations to use such EOSs for obtaining a limit in the mass radius diagram, known as the causal limit, above which no stellar configurations are possible if the EOS fulfills the condition that the sound velocity is smaller than the speed of light. We find that the equilibrium solutions in the braneworld model can violate the general relativistic causal limit, and for sufficiently large mass they approach asymptotically to the Schwarzschild limit M =2 R . Then, we investigate the properties of hadronic and strange quark stars using two typical EOSs: a nonlinear relativistic mean-field model for hadronic matter and the Massachusetts Institute of Technology (MIT) bag model for quark matter. For masses below ˜1.5 M⊙- 2 M⊙ , the mass versus radius curves show the typical behavior found within the frame of general relativity. However, we also find a new branch of stellar configurations that can violate the general relativistic causal limit and that, in principle, may have an arbitrarily large mass. The stars belonging to this new branch are supported against collapse by the nonlocal effects of the bulk on the brane. We also show that these stars are always stable under small radial perturbations. These results support the idea that traces of extra dimensions might be found in astrophysics, specifically through the analysis of masses and
Webb, David Bedford
The solution of electromagnetic scattering by objects located in planar, multilayered media has long been the subject of active research. For layered-media integral equation solutions via the Method of Moments (MoM), the O(N^2) matrix fill is often prohibitively expensive, even for problems of moderate size. For spatial-domain formulations, this is due to the presence of the Sommerfeld integrals required for obtaining the Green's functions in spatial form. These integrals are completely avoided through use of the complex-image method, which represents the spatial -domain Green's functions in closed form. However, this method is not without limitations, most notably a finite region of validity and an undesirable sensitivity to the choice of requisite parameters. This thesis focuses on methods for overcoming these limitations, to allow robust implementation of the method within the framework of an automated, general-purpose analysis program, applicable to the solution of scattering from arbitrarily shaped objects residing in any number of dielectric layers. Evaluations of several possible improvements to the original complex -image method are presented. A new approach is also presented for representing the angular-dependent Green's function terms that are required when both horizontal and vertical electric currents are present. The complex-image method is applied in this work to the MoM solution of the mixed-potential form of the electric field integral equation (MPIE). Several numerical results are presented for planar and nonplanar objects, including a microstrip patch antenna, wire dipole antennas penetrating dielectric half-spaces, and a microstrip air bridge. These results are compared with measurements or the results from other programs whenever possible. A brief discussion of scattering parameter extraction is also covered, with a comparison of the Prony and Generalized Pencil-of-Functions (GPOF) methods.
Sister, Ilya; Leviatan, Yehuda; Schächter, Levi
2017-06-12
Planck's famous blackbody radiation law was derived under the assumption that the dimensions of the radiating body are significantly larger than the radiated wavelengths. What is unique about Planck's formula is the fact that it is independent of the exact loss mechanism and the geometry. Therefore, for a long period of time, it was regarded as a fundamental property of all materials. Deviations from its predictions were attributed to imperfections and referred to as the emissivity of the specific body, a quantity which was always assumed to be smaller than unity. Recent studies showed that the emission spectrum is affected by the geometry of the body and in fact, in a limited frequency range, the emitted spectrum may exceed Planck's prediction provided the typical size of the body is of the same order of magnitude as the emitted wavelength. For the investigation of the blackbody radiation from an arbitrarily shaped body, we developed a code which incorporates the fluctuation-dissipation theorem (FDT) and the source model technique (SMT). The former determines the correlation between the quasi-microscopic current densities in the body and the latter is used to solve the electromagnetic problem numerically. In this study we present the essence of combining the two concepts. We verify the validity of our code by comparing its results obtained for the case of a sphere against analytic results and discuss how the accuracy of the solution is assessed in the general case. Finally, we illustrate several configurations in which the emitted spectrum exceeds Planck's prediction as well as cases in which the geometrical resonances of the body are revealed.
Irregular conformal block, spectral curve and flow equations
Choi, Sang Kwan; Zhang, Hong
2015-01-01
Irregular conformal block is motivated by the Argyres-Douglas type of N=2 super conformal gauge theory. We investigate the classical/NS limit of the irregular conformal block using spectral curve on a Riemann surface with irregular punctures, which is equivalent to the loop equation of irregular matrix model. The spectral curve is reduced to the second order (Virasoro symmetry, $SU(2)$ for the gauge theory) and third order ($W_3$ symmetry, $SU(3)$) differential equations of a polynomial with finite degree. The Virasoro and W symmetry generate flow equations in the spectral curve and determine the irregular conformal block, hence the partition function of the Argyres-Douglas theory ala AGT conjecture.
School setting and irregular lunch consumption among adolescents
Pagh Pedersen, Trine; Holstein, Bjørn Evald; Rasmussen, Mette
level variables and irregular lunch consumption. Lunch consumption was measured by lunch frequency questions. Results: We found that the school level factors, “Availability to canteen” and “Adult present in lunch breaks” were associated with irregular lunch consumption. Students with no access...... to canteen had a lower risk of having irregular lunch consumption OR=0.77 (0.62-0.96). Students with no adult present in lunch breaks had a higher risk of irregular lunch consumption OR=1.62 (1.32-1.99). Having irregular lunch consumption was associated with the following individual characteristics: boy, 7th...... the association. Conclusion: The structural setting of the school was associated with children and adolescents’ regularity of lunch consumption in a multilevel model controlled for individual level factors. From the findings we can conclude that availability of canteen and school stall did not promote regular...
Imaging HF-induced large-scale irregularities above HAARP
Djuth, Frank T.; Reinisch, Bodo W.; Kitrosser, David F.; Elder, John H.; Snyder, A. Lee; Sales, Gary S.
2006-02-01
The University of Massachusetts-Lowell digisonde is used with the HAARP high-frequency (HF), ionospheric modification facility to obtain radio images of artificially-produced, large-scale, geomagnetic field-aligned irregularities. F region irregularities generated with the HAARP beam pointed in the vertical and geomagnetic field-aligned directions are examined in a smooth background plasma. It is found that limited large-scale irregularity production takes place with vertical transmissions, whereas there is a dramatic increase in the number of source irregularities with the beam pointed parallel to the geomagnetic field. Strong irregularity production appears to be confined to within ~5° of the geomagnetic zenith and does not fill the volume occupied by the HF beam. A similar effect is observed in optical images of artificial airglow.
Processor Allocation for Optimistic Parallelization of Irregular Programs
Versaci, Francesco
2012-01-01
Optimistic parallelization is a promising approach for the parallelization of irregular algorithms: potentially interfering tasks are launched dynamically, and the runtime system detects conflicts between concurrent activities, aborting and rolling back conflicting tasks. However, parallelism in irregular algorithms is very complex. In a regular algorithm like dense matrix multiplication, the amount of parallelism can usually be expressed as a function of the problem size, so it is reasonably straightforward to determine how many processors should be allocated to execute a regular algorithm of a certain size (this is called the processor allocation problem). In contrast, parallelism in irregular algorithms can be a function of input parameters, and the amount of parallelism can vary dramatically during the execution of the irregular algorithm. Therefore, the processor allocation problem for irregular algorithms is very difficult. In this paper, we describe the first systematic strategy for addressing this pro...
Park, Jong M.; Eversman, W.
1992-01-01
2D sound propagation over an arbitrarily-shaped barrier situated on a locally reacting infinite plane in a homogeneous medium is treated utilizing the BEM. The BIE is formulated so that the integral along an infinite homogeneous plane disappears if the half space Green's function is selected to satisfy the boundary condition of this plane. Comparison of the BEM results with test results by Habault and by Kearns shows good agreement of the sound field utilizing the BEM.
Jalving, Camilla
Hvordan kan et kunstværk være en handling? Hvad er performativ billedkunst, og hvad menes der egentlig med ordet ´performativitet´? Det er nogle af de spørgsmål, bogen Værk som handling griber fat i. Mens performativitet i løbet af de sidste ti år er blevet et bredt anvendt begreb i kulturteorien...... mellem værket som objekt og som handling. Bogens værkanalyser orienterer sig derfor både mod, hvad kunstværket er, og hvordan det er: Hvordan virker det, hvordan stiller det sig frem, hvordan producerer det betydning, hvordan skaber det en situation, og ikke mindst hvordan interagerer det med betragteren?...
Lark, P D; Bosworth, R C L
1968-01-01
The Handling of Chemical Data deals with how measurements, such as those arrived at from chemical experimentation, are handled. The book discusses the different kinds of measurements and their specific dimensional characteristics by starting with the origin and presentation of chemical data. The text explains the units, fixed points, and relationships found between scales, the concept of dimensions, the presentation of quantitative data (whether in a tabular or graphical form), and some uses of empirical equations. The book also explains the relationship between two variables, and how equatio
How Retailers Handle Complaint Management
Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy
2009-01-01
as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... negative consequences of customer dissatisfaction leads to a more negative view on interacting with complaining customers....
Magnetic fields in Local Group dwarf irregulars
Chyży, K. T.; Weżgowiec, M.; Beck, R.; Bomans, D. J.
2011-05-01
Aims: We wish to clarify whether strong magnetic fields can be effectively generated in typically low-mass dwarf galaxies and to assess the role of dwarf galaxies in the magnetization of the Universe. Methods: We performed a search for radio emission and magnetic fields in an unbiased sample of 12 Local Group (LG) irregular and dwarf irregular galaxies with the 100-m Effelsberg telescope at 2.64 GHz. Three galaxies were detected. A higher frequency (4.85 GHz) was used to search for polarized emission in five dwarfs that are the most luminous ones in the infrared domain, of which three were detected. Results: Magnetic fields in LG dwarfs are weak, with a mean value of the total field strength of regulated mainly by the star-formation surface density (with the power-law exponent of 0.30 ± 0.04) or by the gas surface density (with the exponent 0.47 ± 0.09). In addition, we find systematically stronger fields in objects of higher global star-formation rate. The dwarf galaxies follow a similar far-infrared relationship (with a slope of 0.91 ± 0.08) to that determined for high surface brightness spiral galaxies. The magnetic field strength in dwarf galaxies does not correlate with their maximum rotational velocity, indicating that a small-scale rather than a large-scale dynamo process is responsible for producting magnetic fields in dwarfs. If magnetization of the Universe by galactic outflows is coeval with its metal enrichment, we show that more massive objects (such as Lyman break galaxies) can efficiently magnetize the intergalactic medium with a magnetic field strength of about 0.8 nG out to a distance of 160-530 kpc at redshifts 5-3, respectively. Magnetic fields that are several times weaker and shorter magnetization distances are expected for primordial dwarf galaxies. We also predict that most star-forming local dwarfs might have magnetized their surroundings up to a field strength about 0.1 μG within about a 5 kpc distance. Conclusions: Strong magnetic
2010-04-01
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Handling. 820.140 Section 820.140 Food and Drugs... QUALITY SYSTEM REGULATION Handling, Storage, Distribution, and Installation § 820.140 Handling. Each..., contamination, or other adverse effects to product do not occur during handling. ...
2010-01-01
... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of... objectionable odors. (b) Whey or whey products intended for human food shall at all times be handled in a...
李冬
2007-01-01
1.Take care of your body.Exercise, eat healthily,and get plenty of sleep.You’ll handle stress much better. 2.Take down your thoughts.Recording your thoughts in a diary will help you choose your feelings and relieve~* stress. 3.Talk about it.If possible,find someone
V．White; D.Adams; 等
2001-01-01
In this paper we highlight strategies and choices that make the Dφ Data Handling system markedly different from many other experiments' systems,We emphasize how far the Dφ system has come in innovating and implementing a Dφ-specific Data Grid system.We discuss experiences during the first months of detector commissioning and give some future plans for the system.
Kjærsgaard, Poul Søren
2007-01-01
Søgningen til fremmedsprogstudier er faldende, samtidig med at Region Syddanmark har lanceret en plan, der forudsætter et sprogligt beredskab. Hvis regionen skal klare sig i konkurrencen, må den og det regionale universitet handle, så at der er sproguddannelser. Ellers må regionen og universitetet...
Data Handling and Parameter Estimation
Sin, Gürkan; Gernaey, Krist
2016-01-01
literature that are mostly based on the ActivatedSludge Model (ASM) framework and their appropriate extensions (Henze et al., 2000).The chapter presents an overview of the most commonly used methods in the estimation of parameters from experimental batch data, namely: (i) data handling and validation, (ii...
At skabe handling og forandring
2015-01-01
” (Investigation-Vision-Action-Change, på dansk Undersøgelse-Vision-Handling-Forandring). Forskning i anvendelsen af IVAC i pædagogiske udviklingsprojekter i skoler viser, at lærere kan tilpasse IVAC det konkrete sundhedsemne, de beskæftiger sig med, ligesom metoden kan afpasses pensumkravene, klassetrin og...
TNO reticle handling test platform
Crowcombe, W.E.; Hollemans, C.L.; Fritz, E.C.; Donck, J.C.J. van der; Koster, N.B.
2014-01-01
Particle free handling of EUV reticles is a major concern in industry. For reaching economically feasible yield levels, it is reported that Particle-per-Reticle-Pass (PRP) levels should be better than 0.0001 for particles larger than 18 nm. Such cleanliness levels are yet to be reported for current
Bachman, T.; Fischer, M. [Liebherr-Werk Nenzing GmbH (Austria)
2004-01-01
The paper reviews recent bulk handling crane orders from Liebherr. These include mobile harbour cranes at the Port of Dunkirk, a four-rope grab crane at Phu My Port, Vietnam and CBG cranes at Balikpapan Coal Terminal, Indonesia. 4 figs.
Shape reconstruction of irregular bodies with multiple complementary data sources
Kaasalainen, M.; Viikinkoski, M.; Carry, B.; Durech, J.; Lamy, P.; Jorda, L.; Marchis, F.; Hestroffer, D.
2011-10-01
Irregularly shaped bodies with at most partial in situ data are a particular challenge for shape reconstruction and mapping. We have created an inversion algorithm and software package for complementary data sources, with which it is possible to create shape and spin models with feature details even when only groundbased data are available. The procedure uses photometry, adaptive optics or other images, occultation timings, and interferometry as main data sources, and we are extending it to include range-Doppler radar and thermal infrared data as well. The data sources are described as generalized projections in various observable spaces [2], which allows their uniform handling with essentially the same techniques, making the addition of new data sources inexpensive in terms of computation time or software development. We present a generally applicable shape support that can be automatically used for all surface types, including strongly nonconvex or non-starlike shapes. New models of Kleopatra (from photometry, adaptive optics, and interferometry) and Hermione are examples of this approach. When using adaptive optics images, the main information from these is extracted from the limb and terminator contours that can be determined much more accurately than the image pixel brightnesses that inevitably contain large errors for most targets. We have shown that the contours yield a wealth of information independent of the scattering properties of the surface [3]. Their use also facilitates a very fast and robustly converging algorithm. An important concept in the inversion is the optimal weighting of the various data modes. We have developed a mathematicallly rigorous scheme for this purpose. The resulting maximum compatibility estimate [3], a multimodal generalization of the maximum likelihood estimate, ensures that the actual information content of each source is properly taken into account, and that the resolution scale of the ensuing model can be reliably estimated
Orbital maneuvers around irregular shaped bodies
Venditti, Flaviane; Rocco, E. M.; Almeida Prado, A. B.
2013-05-01
Abstract (2,250 Maximum Characters): In the solar system there are many small bodies called asteroids. The large majority of these bodies are located in the asteroid belt, between the orbits of the planets Mars and Jupiter. The Near- Earth Objects, or NEOs, are objects with perihelion below 1.3AU, which include comets and asteroids. The NEOs are considered to have orbits passing close to the Earth’s orbit and, in the case of asteroids, are called Near-Earth Asteroids (NEAs). Among the NEAs there are bodies considered potentially hazardous asteroids (PHAs), whose minimum orbit intersection distance with Earth is 0.05AU and that have absolute magnitude (H) of 22, which would mean an asteroid of at least 110-240 meters, depending on its albedo. One of the major characteristic of the asteroids is the irregular shape, causing the dynamics of orbits around these bodies to be different from a spherical shaped one. The fact that an object is not spherical generates a perturbation on the gravitational field. The disturbing force can be determined considering the shape of the specific body. A satellite orbiting this body would suffer the effects of this perturbation, but knowing the disturbing force, it’s possible to correct and control the orbit according to the desired mission. The polyhedron method is a traditional way to model an asteroid by dividing the object into smaller parts. The data used on this work are composed by a combination of triangular faces. The total disturbing force is a sum of the force on each piece of the model. Therefore, after the simulations are obtained, it’s possible to apply the desired corrections of the perturbation using continuous low thrust in closed loop, making it possible to perform maneuvers near these bodies. One of the important applications of the study shown above is in the ASTER mission, that is under study by INPE and several other Brazilian academic institutions, which goal is to send a spacecraft to an asteroid and then
Determining Ionospheric Irregularity Spectral Density Function from Japan GEONET
Lay, E. H.; Light, M. E.; Parker, P. A.; Carrano, C. S.; Haaser, R. A.
2015-12-01
Japan's GEONET GPS network is the densest GPS monitoring network in the world, with 1200+ receivers over the area of Japan. Measuring and calibrating the integrated total electron content (TEC) from each station has been done in many cases to provide detailed maps of ionospheric disturbances over Japan. We use TEC measurements from Japan's GEONET array to determine an empirically derived description of the 2-dimensional scale sizes of spatial irregularities above Japan. The contributions from various scale sizes will be included in a statistical description for the irregularity spectral density (ISD) function. We will compare the statistics of the spatial irregularities between calm and moderately scintillated conditions.
A.F. van Belkum (Alex); H. Maas (Hugo); H.A. Verbrugh (Henri); N. van Leeuwen (N.)
1996-01-01
textabstractFifty clinical and environmental isolates of Legionella pneumophila were typed serologically and by DNA fingerprinting using arbitrarily primed polymerase chain reaction (AP-PCR). Furthermore, variability in and around ribosomal operons was assessed by conventional ribotyping and
G. Chen
2017-09-01
Full Text Available The handling of iron ore bulk solids maintains an increasing trend due to economic development. Because iron ore particles have hard composites and irregular shapes, the bulk solids handling equipment surface can suffer from severe sliding wear. Prediction of equipment surface wear volume is beneficial to the efficient maintenance of worn areas. Archard’s equation provides a theoretical solution to predict wear volume. To use Archard’s equation, the coefficient of sliding wear must be determined. To our best knowledge, the coefficient of sliding wear for iron ore handling conditions has not yet been determined. In this research, using a pin-on-disk tribometer, the coefficients of sliding wear for both Sishen particles and mild steel are determined with regard to iron ore handling conditions. Both naturally irregular and spherical shapes of particles are used to estimate average values of wear rate. Moreover, the hardness and inner structures of Sishen particles are examined, which adds the evidence of the interpretation of wear results. It is concluded that the coefficients of sliding wear can vary largely for both Sishen particle and mild steel. The wear rate decreases from transient- to steady-state. The average coefficient of sliding wear is capable of predicting wear with respect to long distances at the steady-state. Two types of sliding friction are distinguished. In addition, it is found that the temperature rise of the friction pairs has negligible influence on wear rate.
An Efficient GPU General Sparse Matrix-Matrix Multiplication for Irregular Data
Liu, Weifeng; Vinter, Brian
2014-01-01
matrices. Recent work on GPU SpGEMM has demonstrated rather good both time and space complexity, but works best for fairly regular matrices. In this work we present a GPU SpGEMM algorithm that particularly focuses on the above three problems. Memory pre-allocation for the result matrix is organized......General sparse matrix-matrix multiplication (SpGEMM) is a fundamental building block for numerous applications such as algebraic multigrid method, breadth first search and shortest path problem. Compared to other sparse BLAS routines, an efficient parallel SpGEMM algorithm has to handle extra...... irregularity from three aspects: (1) the number of the nonzero entries in the result sparse matrix is unknown in advance, (2) very expensive parallel insert operations at random positions in the result sparse matrix dominate the execution time, and (3) load balancing must account for sparse data in both input...
The irregularities of the sunspot cycle and their theoretical modelling
Choudhuri, Arnab Rai
2013-01-01
The 11-year sunspot cycle has many irregularities, the most promi- nent amongst them being the grand minima when sunspots may not be seen for several cycles. After summarizing the relevant observational data about the irregularities, we introduce the flux transport dynamo model, the currently most successful theoretical model for explaining the 11-year sunspot cycle. Then we analyze the respective roles of nonlinearities and random fluctuations in creating the irregularities. We also discuss how it has recently been realized that the fluctuations in meridional circula- tion also can be a source of irregularities. We end by pointing out that fluctuations in the poloidal field generation and fluctuations in meridional circulation together can explain the occurrences of grand minima.
Land Elevation TINs (Triangulated Irregular Networks) for Jefferson County, WI
Federal Emergency Management Agency, Department of Homeland Security — The Land Elevation TINs (Triangulated Irregular Networks) in this directory are generated from 2 foot contour lines from Jefferson County. Little is known about the...
Approximate design calculation methods for radiation streaming in shield irregularities
Miura, Toshimasa; Hirao, Yoshihiro [Ship Research Inst., Mitaka, Tokyo (Japan); Yoritsune, Tsutomu
1997-10-01
Investigation and assessment are made for approximate design calculation methods of radiation streaming in shield irregularities. Investigation is made for (1) source, (2) definition of streaming radiation components, (3) calculation methods of streaming radiation, (4) streaming formulas for each irregularity, (5) difficulties in application of streaming formulas, etc. Furthermore, investigation is made for simple calculation codes and albedo data. As a result, it is clarified that streaming calculation formulas are not enough to cover various irregularities and their accuracy or application limit is not sufficiently clear. Accurate treatment is not made in the formulas with respect to the radiation behavior for slant incidence, bend part, offset etc., that results in too much safety factors in the design calculation and distrust of the streaming calculation. To overcome the state and improve the accuracy of the design calculation for shield irregularities, it is emphasized to assess existing formulas and develop better formulas based on systematic experimental studies. (author)
Irregular sampling for multivariate band-limited functions
SUN; Wenchang(孙文昌); ZHOU; Xingwei(周性伟)
2002-01-01
In this paper, we present some new algorithms to reconstruct multivariate band-limited functionsfrom irregular sampled values, which allow more arbitrary sampling points and lower sampling densities thanknown results.
What Are the Common Treatments for Menstrual Irregularities?
... the menstrual problem, such as counseling for an eating disorder or extreme excercise Treatment for menstrual irregularities that ... Home Contact Accessibility Web Policies and Notices FOIA Facebook Twitter Pinterest YouTube RSS NIH...Turning Discovery Into ...
Handling Software Faults with Redundancy
Carzaniga, Antonio; Gorla, Alessandra; Pezzè, Mauro
Software engineering methods can increase the dependability of software systems, and yet some faults escape even the most rigorous and methodical development process. Therefore, to guarantee high levels of reliability in the presence of faults, software systems must be designed to reduce the impact of the failures caused by such faults, for example by deploying techniques to detect and compensate for erroneous runtime conditions. In this chapter, we focus on software techniques to handle software faults, and we survey several such techniques developed in the area of fault tolerance and more recently in the area of autonomic computing. Since practically all techniques exploit some form of redundancy, we consider the impact of redundancy on the software architecture, and we propose a taxonomy centered on the nature and use of redundancy in software systems. The primary utility of this taxonomy is to classify and compare techniques to handle software faults.
Implementation of a Novel Concatenated FEC by RS and Irregular Turbo Codes on OFDM Systems
A. Shanmugam
2005-01-01
Full Text Available Code Division Multiple Access (CDMA performs well in a multi-cellular environment where a single frequency is used in all cells. Code Division Multiple Access (CDMA has severe problems associated with multipath and Channel news. One possible problem is that the receiver may require a very large dynamic range in order to handle the large signal strength variation among users. Due to that the Bit Error Rate (BER is getting increased. Moreover due to the addition of uncontrollable random channel noise degrade the performance of the receiver. The multipath problems give inter symbol interference. This can be reduced by Orthogonal Frequency Division Multiplexing (OFDM technique. More work could be done on investigating suitable techniques for doing OFDM promises to be a suitable modulation technique for high capacity wireless communications and will become increasing important in the future as wireless networks become more relied on. In order to increase the wireless network performance, this study has concentrated on OFDM with a novel forward error correction by data transmission with Quadrature Phase Shift Keying (QPSK as modulation techniques. Here an FEC scheme by concatenation of Reed Solomon (RS and the Irregular Turbo code is implemented in OFDM. The simulation results show that the system BER performance is decreased with this technique, when compared to the system having Forward Error Correction (FEC by RS code alone and irregular turbo code alone.
Helicopters in Irregular Warfare: Algeria, Vietnam, and Afghanistan
2013-06-13
the political group associated with the Algerian nationalist independence movement GALAT Groupement d’ Aviation Légère de l’Armée de Terre ...unique from most conflicts because the expeditionary forces’ parent country rarely perceives an existential threat.19 The lack of perceived threat...dominance rarely guarantees success in irregular warfare.22 Instead, success in irregular warfare requires synergy between government and military efforts
Enteral Feeding Set Handling Techniques.
Lyman, Beth; Williams, Maria; Sollazzo, Janet; Hayden, Ashley; Hensley, Pam; Dai, Hongying; Roberts, Cristine
2017-04-01
Enteral nutrition therapy is common practice in pediatric clinical settings. Often patients will receive a pump-assisted bolus feeding over 30 minutes several times per day using the same enteral feeding set (EFS). This study aims to determine the safest and most efficacious way to handle the EFS between feedings. Three EFS handling techniques were compared through simulation for bacterial growth, nursing time, and supply costs: (1) rinsing the EFS with sterile water after each feeding, (2) refrigerating the EFS between feedings, and (3) using a ready-to-hang (RTH) product maintained at room temperature. Cultures were obtained at baseline, hour 12, and hour 21 of the 24-hour cycle. A time-in-motion analysis was conducted and reported in average number of seconds to complete each procedure. Supply costs were inventoried for 1 month comparing the actual usage to our estimated usage. Of 1080 cultures obtained, the overall bacterial growth rate was 8.7%. The rinse and refrigeration techniques displayed similar bacterial growth (11.4% vs 10.3%, P = .63). The RTH technique displayed the least bacterial growth of any method (4.4%, P = .002). The time analysis in minutes showed the rinse method was the most time-consuming (44.8 ± 2.7) vs refrigeration (35.8 ± 2.6) and RTH (31.08 ± 0.6) ( P < .0001). All 3 EFS handling techniques displayed low bacterial growth. RTH was superior in bacterial growth, nursing time, and supply costs. Since not all pediatric formulas are available in RTH, we conclude that refrigerating the EFS between uses is the next most efficacious method for handling the EFS between bolus feeds.
A Dynamic Programming-Based Heuristic for the Shift Design Problem in Airport Ground Handling
Clausen, Tommy
We consider the heterogeneous shift design problem for a workforce with multiple skills, where work shifts are created to cover a given demand as well as possible while minimizing cost and satisfying a flexible set of constraints. We focus mainly on applications within airport ground handling where...... the demand can be highly irregular and specified on time intervals as short as five minutes. Ground handling operations are subject to a high degree of cooperation and specialization that require workers with different qualifications to be planned together. Different labor regulations or organizational rules...... can apply to different ground handling operations, so the rules and restrictions can be numerous and vary significantly. This is modeled using flexible volume constraints that limit the creation of certain shifts. We present a fast heuristic for the heterogeneous shift design problem based on dynamic...
Orion Entry Handling Qualities Assessments
Bihari, B.; Tiggers, M.; Strahan, A.; Gonzalez, R.; Sullivan, K.; Stephens, J. P.; Hart, J.; Law, H., III; Bilimoria, K.; Bailey, R.
2011-01-01
The Orion Command Module (CM) is a capsule designed to bring crew back from the International Space Station (ISS), the moon and beyond. The atmospheric entry portion of the flight is deigned to be flown in autopilot mode for nominal situations. However, there exists the possibility for the crew to take over manual control in off-nominal situations. In these instances, the spacecraft must meet specific handling qualities criteria. To address these criteria two separate assessments of the Orion CM s entry Handling Qualities (HQ) were conducted at NASA s Johnson Space Center (JSC) using the Cooper-Harper scale (Cooper & Harper, 1969). These assessments were conducted in the summers of 2008 and 2010 using the Advanced NASA Technology Architecture for Exploration Studies (ANTARES) six degree of freedom, high fidelity Guidance, Navigation, and Control (GN&C) simulation. This paper will address the specifics of the handling qualities criteria, the vehicle configuration, the scenarios flown, the simulation background and setup, crew interfaces and displays, piloting techniques, ratings and crew comments, pre- and post-fight briefings, lessons learned and changes made to improve the overall system performance. The data collection tools, methods, data reduction and output reports will also be discussed. The objective of the 2008 entry HQ assessment was to evaluate the handling qualities of the CM during a lunar skip return. A lunar skip entry case was selected because it was considered the most demanding of all bank control scenarios. Even though skip entry is not planned to be flown manually, it was hypothesized that if a pilot could fly the harder skip entry case, then they could also fly a simpler loads managed or ballistic (constant bank rate command) entry scenario. In addition, with the evaluation set-up of multiple tasks within the entry case, handling qualities ratings collected in the evaluation could be used to assess other scenarios such as the constant bank angle
Takeshi Sato
2016-10-01
Full Text Available This work describes an intriguing strategy for the creation of arbitrarily shaped hydrogels utilizing a self-healing template (SHT. A SHT was loaded with a photo-crosslinkable monomer, PEG diacrylate (PEGDA, and then ultraviolet light (UV crosslinked after first shaping. The SHT template was removed by simple washing with water, leaving behind the hydrogel in the desired physical shape. A hierarchical 3D structure such as “Matreshka” boxes were successfully prepared by simply repeating the “self-healing” and “photo-irradiation” processes. We have also explored the potential of the SHT system for the manipulation of cells.
2010-01-01
... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack,...
Proper Handling and Storage of Human Milk
... Breastfeeding Micronutrient Malnutrition State and Local Programs Proper Handling and Storage of Human Milk Recommend on Facebook ... sure to wash your hands before expressing or handling breast milk. When collecting milk, be sure to ...
2010-01-01
... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.312 Handle. Handle means to harvest, gin, warehouse, compress, purchase, market, transport, or otherwise acquire ownership or control of cotton....
HMSRP Hawaiian Monk Seal Handling Data
National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...
2010-01-01
... NEW MEXICO Definitions § 983.14 Handle. Handle means to engage in: (a) Receiving pistachios; (b... of interstate or foreign commerce; and/or (d) Placing pistachios into the current of commerce...
On irregular conformal blocks, with an application to the Painlev\\'e functions
Nagoya, Hajime
2015-01-01
We develop the theory on irregular conformal blocks of the Virasoro algebra. In previous studies, expansions of irregular conformal blocks at regular singular points were obtained as degeneration limits of regular conformal blocks, however, expansions of those at irregular singular points were not understood clearly. This is because precise definitions of irregular vertex operators had not given before. In this paper, we give precise definitions of irregular vertex operators of two kinds and conjecture that they exist uniquely. Then, we define irregular conformal blocks with at most two irregular singular points, as expectation values of the given irregular vertex operators. Our definitions give an understanding of expansions of irregular conformal blocks and are enable us to obtain expansions at irregular singular points. As an application, we give conjectural formulas of Fourier expansions of the tau functions of the fifth and fourth Painlev\\'e functions, using expansions of irregular conformal blocks at an...
Feedstock storage, handling and processing
Egg, R.P.; Coble, C.G.; Engler, C.R. (Texas A and M Univ., College Station, TX (United States). Dept. of Agricultural Engineering); Lewis, D.H. (Texas A and M Univ., College Station, TX (United States). Dept. of Veterinary Microbiology and Parasitology)
1993-01-01
This paper is a review of the technology and research covering components of a methane from biomass system between the field and the digester. It deals primarily with sorghum as a feedstock and focuses on research conducted by the Texas Agricultural Experiment Station. Subjects included in this paper are harvesting, hay storage, ansiling, materials handling, pumping and hydraulic characteristics, hydraulic conductivity, pressure/density relationship, and biological pretreatment. This paper is not a comprehensive design manual; however, design equations and coefficients for sorghum are presented, where available, along with references describing the development and application of design models. (author)
Logik, mening, handling og tale
Widell, Peter
2009-01-01
skal ses i relation til sandheds- og meningstilskrivning, sådan som den finder sted ikke i først og fremmest i sproget, men i tanken, sådan som den åbenbarer sig i instrumentelle handling. Det er på baggrund af denne pragmatisering af logikken, talehandlingsbegrebet skal ses: Først og fremmest som den...... instrumentelle handleverdens møde med den sociale verden i assertivet. Dernæst som assertivets nødvendige udspaltninger i normativet og konstativet. Og endelig som de perlokutionære handlinger kommissiv, direktiv og informativ....
Freeman, S.; Pham, M.; Rodriguez, R.J.
1993-01-01
Molecular genotyping of Colletotrichum species based on arbitrarily primed PCR, A + T-rich DNA, and nuclear DNA analyses. Experimental Mycology 17, 309-322. Isolates of Colletotrichum were grouped into 10 separate species based on arbitrarily primed PCR (ap-PCR), A + T-rich DNA (AT-DNA) and nuclear DNA banding patterns. In general, the grouping of Colletotrichum isolates by these molecular approaches corresponded to that done by classical taxonomic identification, however, some exceptions were observed. PCR amplification of genomic DNA using four different primers allowed for reliable differentiation between isolates of the 10 species. HaeIII digestion patterns of AT-DNA also distinguished between species of Colletotrichum by generating species-specific band patterns. In addition, hybridization of the repetitive DNA element (GcpR1) to genomic DNA identified a unique set of Pst 1-digested nuclear DNA fragments in each of the 10 species of Colletotrichum tested. Multiple isolates of C. acutatum, C. coccodes, C. fragariae, C. lindemuthianum, C. magna, C. orbiculare, C. graminicola from maize, and C. graminicola from sorghum showed 86-100% intraspecies similarity based on ap-PCR and AT-DNA analyses. Interspecies similarity determined by ap-PCR and AT-DNA analyses varied between 0 and 33%. Three distinct banding patterns were detected in isolates of C. gloeosporioides from strawberry. Similarly, three different banding patterns were observed among isolates of C. musae from diseased banana.
29 CFR 1926.953 - Material handling.
2010-07-01
... 29 Labor 8 2010-07-01 2010-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... employees exist tag lines or other suitable devices shall be used to control loads being handled by hoisting...
2010-10-01
... 50 Wildlife and Fisheries 1 2010-10-01 2010-10-01 false Handling. 14.111 Section 14.111 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION... and Birds to the United States § 14.111 Handling. (a) Care shall be exercised to avoid handling the...
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.118 Section 3.118 Animals... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine Mammals Transportation Standards § 3.118 Handling. (a) Carriers and intermediate handlers moving marine...
7 CFR 985.152 - Handling report.
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling report. 985.152 Section 985.152 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Administrative Rules and Regulations § 985.152 Handling...
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.142 Section 3.142 Animals... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of... Mammals Transportation Standards § 3.142 Handling. (a) Carriers and intermediate handlers shall move live...
Scheduling of outbound luggage handling at airports
Barth, Torben C.; Pisinger, David
2012-01-01
This article considers the outbound luggage handling problem at airports. The problem is to assign handling facilities to outbound flights and decide about the handling start time. This dynamic, near real-time assignment problem is part of the daily airport operations. Quality, efficiency and rob...
Calculations of Fraunhofer diffraction by irregularly shaped particles%不规则形状粒子Fraunhofer衍射计算
赵剑琦
2011-01-01
Calculations of the Fraunhofer diffraction integrals for the translucent particles of irregular shape are discussed. Three kinds of new 1 D contour integral for diffraction are derived by means of scalar Kirchhoff theory, and they are equivalent to each other and can get rid of the drawbacks of regional division in usual 2D surface integrals. Finally, analytical formula of diffraction integrals for the particles with arbitrarily polygonal projection are obtained.%讨论了半透明不规则形状粒子Fraunhofer衍射积分的计算问题,借助于标量Kirchhoff理论,推导出关于衍射的3种新的相互等价的1D围线积分形式,直接摆脱了通常2D面积分中繁琐的区域划分的束缚.在此基础上求得投影截面为任意多角形粒子衍射的解析结果.
Irregularity excitation associated with charged dust cloud boundary layers
Mahmoudian, A.; Scales, W. A.
2012-02-01
Irregularity generation associated with dust cloud expansion through a background plasma along a magnetic field is investigated. Because of the dust charging process, a boundary layer is produced, separating the dusty plasma generated and the background plasma. It is observed that under appropriate conditions, localized plasma irregularities may be generated in this boundary layer. Theoretical and computational models are used to study the evolution of relevant plasma instabilities thought to play a dominant role in irregularity production. An electron flow develops along the boundary layer of the dust cloud, and plasma irregularities are generated in response to this flow. Several aspects of the cloud's structure (thickness of the boundary layer, average particle size and density, collisional processes, and cloud expansion speed) and the ambient plasma are varied to determine the effect of these quantities on the resulting irregularities. The relevance of these results to past experimental observations in space and the laboratory for applications to the expansion of naturally or artificially created dust clouds is discussed.
Dark Matter and the Chemical Evolution of Irregular Galaxies
L. Carigi
2001-01-01
Full Text Available We present three types of chemical evolution models for irregular galaxies: closed-box with continuous star formation rates (SFRs, closed-box with burstin g SFRs, and O-rich outflow with continuous SFRs. We discuss the chemical evolution of the irregular galaxies NGC 1560 and II Zw 33, and a "typical" irregular galaxy. The fraction of low-mass stars needed by our models is larger than that derived for the solar vicinity, but similar to that found in globular clusters. For our typical irregular galaxy we need a mass fraction of about 40% in the form of substellar objects plus non baryonic dark matter inside the Holmberg radius, in good agreement with the results derived for NGC 1560 and II Zw 33 where we do have an independent estimate of the mass fraction in non baryonic dark matter. Closed-box models are better than O-rich outflow models in explaining the C/O and Z/O observed values for our typical irregular galaxy.
Memory-efficient contour-based region-of-interest coding of arbitrarily large images
Sadaka, Nabil G.; Abousleman, Glen P.; Karam, Lina J.
2007-04-01
In this paper, we present a memory-efficient, contour-based, region-of-interest (ROI) algorithm designed for ultra-low-bit- rate compression of very large images. The proposed technique is integrated into a user-interactive wavelet-based image coding system in which multiple ROIs of any shape and size can be selected and coded efficiently. The coding technique compresses region-of-interest and background (non-ROI) information independently by allocating more bits to the selected targets and fewer bits to the background data. This allows the user to transmit large images at very low bandwidths with lossy/lossless ROI coding, while preserving the background content to a certain level for contextual purposes. Extremely large images (e.g., 65000 X 65000 pixels) with multiple large ROIs can be coded with minimal memory usage by using intelligent ROI tiling techniques. The foreground information at the encoder/decoder is independently extracted for each tile without adding extra ROI side information to the bit stream. The arbitrary ROI contour is down-sampled and differential chain coded (DCC) for efficient transmission. ROI wavelet masks for each tile are generated and processed independently to handle any size image and any shape/size of overlapping ROIs. The resulting system dramatically reduces the data storage and transmission bandwidth requirements for large digital images with multiple ROIs.
An Efficient XFEM Approximation of Darcy Flows in Arbitrarily Fractured Porous Media
Fumagalli Alessio
2014-07-01
Full Text Available Subsurface flows are influenced by the presence of faults and large fractures which act as preferential paths or barriers for the flow. In literature models were proposed to handle fractures in a porous medium as objects of codimension 1. In this work we consider the case of a network of intersecting fractures, with the aim of deriving physically consistent and effective interface conditions to impose at the intersection between fractures. This new model accounts for the angle between fractures at the intersections and allows for jumps of pressure across the intersection. This latter property permits to describe more accurately the flow when fractures are characterised by different properties, than other models that impose pressure continuity. The main mathematical properties of the model, derived in the two-dimensional setting, are analysed. As concerns the numerical discretization we allow the grids of the fractures to be independent, thus in general non-matching at the intersection, by means of the Extended Finite Element Method (XFEM, to increase the flexibility of the method in the case of complex geometries characterized by a high number of fractures.
Regulation of Irregular Neuronal Firing by Autaptic Transmission
Guo, Daqing; Wu, Shengdun; Chen, Mingming; Perc, Matjaž; Zhang, Yangsong; Ma, Jingling; Cui, Yan; Xu, Peng; Xia, Yang; Yao, Dezhong
2016-05-01
The importance of self-feedback autaptic transmission in modulating spike-time irregularity is still poorly understood. By using a biophysical model that incorporates autaptic coupling, we here show that self-innervation of neurons participates in the modulation of irregular neuronal firing, primarily by regulating the occurrence frequency of burst firing. In particular, we find that both excitatory and electrical autapses increase the occurrence of burst firing, thus reducing neuronal firing regularity. In contrast, inhibitory autapses suppress burst firing and therefore tend to improve the regularity of neuronal firing. Importantly, we show that these findings are independent of the firing properties of individual neurons, and as such can be observed for neurons operating in different modes. Our results provide an insightful mechanistic understanding of how different types of autapses shape irregular firing at the single-neuron level, and they highlight the functional importance of autaptic self-innervation in taming and modulating neurodynamics.
Photometry of Irregular Satellites of Uranus and Neptune
Grav, T
2004-01-01
We present BVR photometric colors of six Uranian and two Neptunian irregular satellites, collected using the Magellan Observatory (Las Campanas, Chile) and the Keck Observatory, (Manua Kea, Hawaii). The colors range from neutral to light red, and like the Jovian and the Saturnian irregulars (Grav et al. 2003) there is an apparent lack of the extremely red objects found among the Centaurs and Kuiper belt objects. The Uranian irregulars can be divided into three possible dynamical families, but the colors collected show that two of these dynamical families, the Caliban and Sycorax-clusters, have heterogeneous colors. Of the third possible family, the 168-degree cluster containing two objects with similar average inclinations but quite different average semi-major axis, only one object (U XXI Trinculo) was observed. The heterogeneous colors and the large dispersion of the average orbital elements leads us to doubt that they are collisional families. We favor single captures as a more likely scenario. The two nep...
BVR Color Survey of the Jovian Irregular Satellites
Rettig, T. W.; Walsh, K.
2002-09-01
BVR colors and magnitudes are presented for four Jovian irregular prograde satellites (Himalia J6, Elara J7, Lysithea J10 and Leda J13) and four irregular retrograde satellites (Pasiphae J8, Sinope J9, Carme J11 and Ananke J12). All eight have generally `solar' colors but the retrograde group has slightly redder and more diverse colors. The strikingly similar colors of the four prograde satellites suggests the parent planetesimal was likely very homogeneous. The four retrograde satellites show diversity in color that suggests a heterogeneous progenitor and thus, variations in pre-capture formation history. The absolute magnitudes and revised diameters are presented. We also report new colors and diameters for two Uranian irregular satellites (Caliban (S/1997 U1) and Sycorax (S/1997 U2)). The Uranian satellite colors are slightly redder than the eight Jovian satellites studied.
A BVR Colors of Eight Jovian Irregular Satellites -- Evolutionary Implications
Rettig, T. W.; Walsh, K.
2001-11-01
We present BVR colors and magnitudes for four Jovian irregular prograde satellites (Himalia J6, Elara J7, Lysithea J10 and Leda J13) and four irregular retrograde satellites (Pasiphae J8, Sinope J9, Carme J11 and Ananke J12). All eight have generally `solar' colors but the retrograde group has slightly redder and more diverse colors. The strikingly similar colors of the four prograde satellites suggests the parent planetesimal was likely very homogeneous. The four retrograde satellites show diversity in color that suggests a heterogeneous progenitor and thus, variations in pre-capture formation history. The absolute magnitudes and revised diameters are presented. We also report new colors and diameters for two Uranian irregular satellites (Caliban (S/1997 U1) and Sycorax (S/1997 U2)) that are slightly redder than any of these Jovian satellites.
Dynamical Configurations of Celestial Systems Comprised of Multiple Irregular Bodies
Jiang, Yu; Baoyin, Hexi; Li, Junfeng
2016-01-01
This manuscript considers the main features of the nonlinear dynamics of multiple irregular celestial body systems. The gravitational potential, static electric potential, and magnetic potential are considered. Based on the three established potentials, we show that three conservative values exist for this system, including a Jacobi integral. The equilibrium conditions for the system are derived and their stability analyzed. The equilibrium conditions of a celestial system comprised of n irregular bodies are reduced to 12n minus 9 equations. The dynamical results are applied to simulate the motion of multiple-asteroid systems. The simulation is useful for the study of the stability of multiple irregular celestial body systems and for the design of spacecraft orbits to triple asteroid systems discovered in the solar system. The dynamical configurations of the five triple-asteroid systems 45 Eugenia, 87 Sylvia, 93 Minerva, 216 Kleopatra, and 136617 1994CC, and the six-body system 134340 Pluto are calculated and...
Track Irregularity Time Series Analysis and Trend Forecasting
Jia Chaolong
2012-01-01
Full Text Available The combination of linear and nonlinear methods is widely used in the prediction of time series data. This paper analyzes track irregularity time series data by using gray incidence degree models and methods of data transformation, trying to find the connotative relationship between the time series data. In this paper, GM (1,1 is based on first-order, single variable linear differential equations; after an adaptive improvement and error correction, it is used to predict the long-term changing trend of track irregularity at a fixed measuring point; the stochastic linear AR, Kalman filtering model, and artificial neural network model are applied to predict the short-term changing trend of track irregularity at unit section. Both long-term and short-term changes prove that the model is effective and can achieve the expected accuracy.
A 2-D NUMERICAL IRREGULAR WAVE TANK AND ITS VERIFICATION
LI Ben-xia; YU Xi-ping; YU Yu-xiu
2005-01-01
A two-dimensional numerical irregular wave tank based on the potential wave theory was developed.A source term was used inside the domain to generate waves, and outgoing waves were dissipated by sponge layers and transmitted by radiation boundary.The σ-coordinate transformation was introduced to map the time-dependent irregular physical domain to a fixed regular computational domain, and thus the free surface and bottom boundary conditions could be implemented precisely.The model was verified by simulating the nonlinear regular and irregular wave propagation on constant-depth water, as well as regular waves reflected from a vertical wall, and satisfactory agreement between numerical results and analytical solutions was obtained.The present numerical model is proved to be an effective tool for a long-duration simulation of coastal wave dynamics where the wave reflection is significant.
Inferring the Coronal Density Irregularity from EUV Spectra
Hahn, Michael
2016-01-01
Understanding the density structure of the solar corona is important for modeling both coronal heating and the solar wind. Direct measurements are difficult because of line-of-sight integration and possible unresolved structures. We present a new method for quantifying such structure using density-sensitive EUV line intensities to derive a density irregularity parameter, a relative measure of the amount of structure along the line of sight. We also present a simple model to relate the inferred irregularities to physical quantities, such as the filling factor and density contrast. For quiet Sun regions and interplume regions of coronal holes, we find a density contrast of at least a factor of three to ten and corresponding filling factors of about 10-20%. Our results are in rough agreement with other estimates of the density structures in these regions. The irregularity diagnostic provides a useful relative measure of unresolved structure in various regions of the corona.
Modeling of Plasma Irregularities in Expanding Ionospheric Dust Clouds
Fu, H.; Scales, W.; Mahmoudian, A.; Bordikar, M. R.
2009-12-01
Natural dust layers occur in the earth’s mesosphere (50km-85km). Plasma irregularities are associated with these natural dust layers that produce radar echoes. Recently, an Ionospheric sounding rocket experiment was performed to investigate the plasma irregularities in upper atmospheric dust layers. The Charged Aerosol Release Experiment (CARE) uses a rocket payload injection of particles in the ionosphere to determine the mechanisms for enhanced radar scatter from plasma irregularities embedded in artificial dusty plasma in space. A 2-D hybrid computational model is described that may be used to study a variety of irregularities in dusty space plasmas which may lead to radar echoes. In this model, the dust and ions are both treated with Particle-In-Cell method while the dust charge varies with time based on the standard dust Orbit Motion Limited charging model. A stochastic model is adopted to remove particle ions due to the dust charging process. Electrons are treated with a fluid model including the parallel dynamics of magnetic fields. Fourier spectral methods with a predictor-corrector time advance are used to solve it. This numerical model will be used to investigate the electrodynamics and several possible plasma irregularity generation mechanisms after the creation of an artificial dust layer. The first is the dust ion-acoustic instability due to the drift of dust relative to the plasma. The instability saturates by trapping some ions. The effects of dust radius and dust drift velocity on plasma irregularities will be analyzed further. Also, a shear- driven instability in expanding dusty clouds is investigated.
Irregular Shaped Building Design Optimization with Building Information Modelling
Lee Xia Sheng
2016-01-01
Full Text Available This research is to recognise the function of Building Information Modelling (BIM in design optimization for irregular shaped buildings. The study focuses on a conceptual irregular shaped “twisted” building design similar to some existing sculpture-like architectures. Form and function are the two most important aspects of new buildings, which are becoming more sophisticated as parts of equally sophisticated “systems” that we are living in. Nowadays, it is common to have irregular shaped or sculpture-like buildings which are very different when compared to regular buildings. Construction industry stakeholders are facing stiff challenges in many aspects such as buildability, cost effectiveness, delivery time and facility management when dealing with irregular shaped building projects. Building Information Modelling (BIM is being utilized to enable architects, engineers and constructors to gain improved visualization for irregular shaped buildings; this has a purpose of identifying critical issues before initiating physical construction work. In this study, three variations of design options differing in rotating angle: 30 degrees, 60 degrees and 90 degrees are created to conduct quantifiable comparisons. Discussions are focused on three major aspects including structural planning, usable building space, and structural constructability. This research concludes that Building Information Modelling is instrumental in facilitating design optimization for irregular shaped building. In the process of comparing different design variations, instead of just giving “yes or no” type of response, stakeholders can now easily visualize, evaluate and decide to achieve the right balance based on their own criteria. Therefore, construction project stakeholders are empowered with superior evaluation and decision making capability.
Transfer Area Mechanical Handling Calculation
B. Dianda
2004-06-23
This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAX Company L.L. C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Arthur, W.J., I11 2004). This correspondence was appended by further Correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-OIRW12101; TDL No. 04-024'' (BSC 2004a). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The purpose of this calculation is to establish preliminary bounding equipment envelopes and weights for the Fuel Handling Facility (FHF) transfer areas equipment. This calculation provides preliminary information only to support development of facility layouts and preliminary load calculations. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process. It is intended that this calculation is superseded as the design advances to reflect information necessary to support License Application. The design choices outlined within this calculation represent a demonstration of feasibility and may or may not be included in the completed design. This calculation provides preliminary weight, dimensional envelope, and equipment position in building for the purposes of defining interface variables. This calculation identifies and sizes major equipment and assemblies that dictate overall equipment dimensions and facility interfaces. Sizing of components is based on the selection of commercially available products, where applicable. This is not a specific recommendation for the future use
Characterizing spontaneous irregular behavior in coupled map lattices
Dobyns, York [PEAR, Princeton University Princeton, NJ 08544-5263 (United States); Atmanspacher, Harald [Institut fuer Grenzgebiete der Psychologie und Psychohygiene Wilhelmstrasse 3a, Freiburg 79098 (Germany)]. E-mail: haa@igpp.de
2005-04-01
Two-dimensional coupled map lattices display, in a specific parameter range, a stable phase (quasi-) periodic in both space and time. With small changes to the model parameters, this stable phase develops spontaneous eruptions of non-periodic behavior. Although this behavior itself appears irregular, it can be characterized in a systematic fashion. In particular, parameter-independent features of the spontaneous eruptions may allow useful empirical characterizations of other phenomena that are intrinsically hard to predict and reproduce. Specific features of the distributions of lifetimes and emergence rates of irregular states display such parameter-independent properties.
MPI Debugging with Handle Introspection
Brock-Nannestad, Laust; DelSignore, John; Squyres, Jeffrey M.;
The Message Passing Interface, MPI, is the standard programming model for high performance computing clusters. However, debugging applications on large scale clusters is difficult. The widely used Message Queue Dumping interface enables inspection of message queue state but there is no general...... interface for extracting information from MPI objects such as communicators. A developer can debug the MPI library as if it was part of the application, but this exposes an unneeded level of detail. The Tools Working Group in the MPI Forum has proposed a specification for MPI Handle Introspection....... It defines a standard interface that lets debuggers extract information from MPI objects. Extracted information is then presented to the developer, in a human readable format. The interface is designed to be independent of MPI implementations and debuggers. In this paper, we describe our support...
Liberalisation of municipal waste handling
Busck, Ole Gunni
2006-01-01
of price reductions in stead of quality demands in both environmental and working environmental terms. A recent study showed major deficits in the capacities of the municipalities to administer qualitative requirements in the tender process and to manage the contracts as an integral part of a scheme...... for improved performance of municipal waste management. The study stresses the need for training and guidance of municipal administrators. Highlighting ‘best practice’ examples the study shows, however, that it is perfectly possible to end up with quality service on contract. It takes a mixture of careful......Liberalisation of municipal waste handling: How are sustainable practices pursued? In the process of liberalization of public services in Europe contracting out the collection of municipal waste has surged. Research in Denmark has shown that municipalities in general have pursued a narrow policy...
O Rahman; A A Mamun
2013-06-01
A theoretical investigation of dust-acoustic solitary waves in three-component unmagnetized dusty plasma consisting of trapped electrons, Maxwellian ions, and arbitrarily charged cold mobile dust was done. It has been found that, owing to the departure from the Maxwellian electron distribution to a vortex-like one, the dynamics of small but finite amplitude dust-acoustic (DA) waves is governed by a nonlinear equation of modified Korteweg–de Vries (mKdV) type (instead of KdV). The reductive perturbation method was employed to study the basic features (amplitude, width, speed, etc.) of DA solitary waves which are significantly modified by the presence of trapped electrons. The implications of our results in space and laboratory plasmas are briefly discussed.
Degani, D.
1984-01-01
A numerical algorithm that is second-order accurate in time has been developed for the conjugated problem of a separated, compressible flow field and a conductive solid body. The full two-dimensional time-dependent Navier-Stokes equations are coupled with the time-dependent energy equation for the solid body and are solved simultaneously. using implicit algorithms. The energy equation for the solid body may include arbitrarily distributed heat sources. The algorithm has been exmined for the case of two-dimensional supersonic compression-corner interaction, with a heat source embedded in the wall in the vicinity of the separation bubble and the attached boundary layer. The effect of the heat source on the flow field is studied for steady and transient cases.
Wei, Yanyu; Liu, Hongtao; He, Jun; Gong, Yubin; Yue, Lingna; Wang, Wenxiang; Park, Gun-Sik
2007-12-01
Properties of traveling wave-beam interaction in a centered dielectric-rod loaded, arbitrarily-shaped helical groove slow-wave structure (SWS) are investigated for a thin annular electron beam. The “hot” dispersion equation is obtained by means of the self-consistent field theory, and the small signal analysis is carried out including the effects of the dielectric-rod parameters and the groove shapes. The numerical results show that the bandwidth of the helical groove TWT is expanded by loading dielectric-rod, however, the small-signal gain is reduced; and when the groove shape changes from the swallow-tail shape to the triangle shape, the working frequency increases , while the peak gain decreases.
Mackenzie, Anne I.; Baginski, Michael E.; Rao, Sadasiva M.
2008-01-01
In this work, we present a new set of basis functions, defined over a pair of planar triangular patches, for the solution of electromagnetic scattering and radiation problems associated with arbitrarily-shaped surfaces using the method of moments solution procedure. The basis functions are constant over the function subdomain and resemble pulse functions for one and two dimensional problems. Further, another set of basis functions, point-wise orthogonal to the first set, is also defined over the same function space. The primary objective of developing these basis functions is to utilize them for the electromagnetic solution involving conducting, dielectric, and composite bodies. However, in the present work, only the conducting body solution is presented and compared with other data.
Arslanagic, Samel; Ziolkowski, Richard W.
2010-01-01
The present work investigates the optical properties of active coated spherical nano-particles excited by an arbitrarily located electric Hertzian dipole. The nano-particles are made of specific dielectric and plasmonic materials. The spatial near-field distribution as well as the normalized...... radiation resistance is examined. Both enhanced as well as reduced radiation effects are demonstrated. In particular, it is shown that specific active coated nano-particles can be designed to be resonant, leading to much larger values of the normalized radiation resistance than is the case...... with the corresponding passive coated nano-particles, thereby overcoming the intrinsic losses present in the plasmonic materials. Moreover, it is shown that other active coated nano-particle designs can significantly reduce the normalized radiation resistance; thus both the resonant as well as non...
Pan Wei-Zhen; Yang Xue-Jun; Xie Zhi-Kun
2011-01-01
Using a new tortoise coordinate transformation, this paper investigates the Hawking effect from an arbitrarily accelerating charged black hole by the improved Damour-Ruffini method. After the tortoise coordinate transformation,the Klein-Gordon equation can be written as the standard form at the event horizon. Then extending the outgoing wave from outside to inside of the horizon analytically, the surface gravity and Hawking temperature can be obtained automatically. It is found that the Hawking temperatures of different points on the surface are different. The quantum nonthermal radiation characteristics of a black hole near the event horizon is also discussed by studying the Hamilton Jacobi equation in curved spacetime and the maximum overlap of the positive and negative energy levels near the event horizon is given. There is a dimensional problem in the standard tortoise coordinate and the present results may be more reasonable.
Robust Fusion of Irregularly Sampled Data Using Adaptive Normalized Convolution
Pham, T.Q.; Van Vliet, L.J.; Schutte, K.
2006-01-01
We present a novel algorithm for image fusion from irregularly sampled data. The method is based on the framework of normalized convolution (NC), in which the local signal is approximated through a projection onto a subspace. The use of polynomial basis functions in this paper makes NC equivalent to
Size and Albedo of Irregular Saturnian Satellites from Spitzer Observations
Mueller, Michael; Grav, T.; Trilling, D.; Stansberry, J.; Sykes, M.
2008-01-01
Using MIPS onboard the Spitzer Space Telescope, we observed the thermal emission (24 and, for some targets, 70 um) of eight irregular satellites of Saturn: Albiorix, Siarnaq, Paaliaq, Kiviuq, Ijiraq, Tarvos, Erriapus, and Ymir. We determined the size and albedo of all targets. An analysis of archive
Size and Albedo of Irregular Saturnian Satellites from Spitzer Observations
Mueller, Michael; Grav, T.; Trilling, D.; Stansberry, J.; Sykes, M.
2008-01-01
Using MIPS onboard the Spitzer Space Telescope, we observed the thermal emission (24 and, for some targets, 70 um) of eight irregular satellites of Saturn: Albiorix, Siarnaq, Paaliaq, Kiviuq, Ijiraq, Tarvos, Erriapus, and Ymir. We determined the size and albedo of all targets. An analysis of archive
Size and Albedo of Irregular Saturnian Satellites from Spitzer Observations
Mueller, Michael; Grav, T.; Trilling, D.; Stansberry, J.; Sykes, M.
2008-01-01
Using MIPS onboard the Spitzer Space Telescope, we observed the thermal emission (24 and, for some targets, 70 um) of eight irregular satellites of Saturn: Albiorix, Siarnaq, Paaliaq, Kiviuq, Ijiraq, Tarvos, Erriapus, and Ymir. We determined the size and albedo of all targets. An analysis of
Structure Irregularity Impedes Drop Roll-Off at Superhydrophobic Surfaces
Larsen, Simon Tylsgaard; Andersen, Nis Korsgaard; Søgaard, Emil
2014-01-01
We study water drop roll-off at superhydrophobic surfaces with different surface patterns. Superhydrophobic microcavity surfaces were fabricated in silicon and coated with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (FDTS). For the more irregular surface patterns, the observed increase in roll...
Modelling of Ionospheric Irregularities and Total Electron Content.
1983-12-01
heating and their Isle stital filtering effet fteAeioatnao aa effects on transitinospherte propagation. Pro,’dnso ips~ obse-vations of the temporal...irregularities at different heights. Radio Phys. Quantum Electron-. Lngl. Transl.. 20. 1246. 1977. S) tfttu-uatiolis. It serrs . ho%&ever thait ;to outer
Predictions of Stellar Occultations by Irregular Satellites up to 2020
Ramos Gomes, Altair; Assafin, Marcelo; Beauvalet, Laurene; Desmars, Josselin; Vieira-Martins, Roberto; Camargo, Julio I.; Morgado, Bruno Eduardo; Braga Ribas, Felipe
2017-06-01
Due to their orbital configurations, it is believed the irregular satellites of the Giant Planets were captured by their host planets during the Solar System evolution. It is important to know their physical parameters such as size, shape, albedo and composition in an attempt to access their origin. The best ground-based technique to do so is by stellar occultations.With the release of the GAIA catalog and the publication of a large database of positions of irregular satellites (Gomes-Júnior et al., 2015), the position of the stars and the ephemeris of the satellites are improved to better predict stellar occultation.The present work predicts such events for the 8 largest irregular satellites of Jupiter and the largest irregular satellite of Saturn, Phoebe, up to 2020. Another motivation is the passage of Jupiter in front of the Galatic Plane in 2019-2020 increasing a lot the number of stars to be occulted. The same happens with Saturn in 2018.
An Analysis of the Incidence of Recruiter Irregularities
2010-01-01
provided data and answered our questions about the incidence of recruiter irregularities. The people are Ted Disney at the U.S. Army Recruiting...are more likely to ultimately be substantiated. The Army and the Navy, in contrast, have fairly expansive inter- nal reporting requirements that
Active Absorption of Irregular Gravity Waves in BEM-Models
Brorsen, Michael; Frigaard, Peter
1992-01-01
The boundary element method is applied to the computation of irregular gravity waves. The boundary conditions at the open boundaries are obtained by a digital filtering technique, where the surface elevations in front of the open boundary are filtered numerically yielding the velocity...
Wheel-rail interaction at short-wave irregularities
Steenbergen, M.J.M.M.
2008-01-01
Short-wave irregularities in the wheel-rail interface are at the basis of track and vehicle damage and deterioration. On the short term, they result into high dynamic train-track interaction forces and a high energy input into the system that must be dissipated in the different system components or
50 KPC radio trails behind irregular galaxies in A1367
Gavazzi, G.; Jaffe, W.
1987-11-01
The authors report the discovery of exceptionally bright and extended trails of radio emission behind three irregular galaxies in the periphery of the cluster A 1367, in the Coma Supercluster. Turbulent interaction with the intergalactic medium or a past catastrophic collision between galaxies could have produced the observed phenomenon.
Modeling irregularly spaced residual series as a continuous stochastic process
Von Asmuth, J.R.; Bierkens, M.F.P.
2005-01-01
In this paper, the background and functioning of a simple but effective continuous time approach for modeling irregularly spaced residual series is presented. The basic equations were published earlier by von Asmuth et al. (2002), who used them as part of a continuous time transfer function noise mo
Robust Fusion of Irregularly Sampled Data Using Adaptive Normalized Convolution
Pham, T.Q.; Vliet, L.J. van; Schutte, K.
2006-01-01
We present a novel algorithm for image fusion from irregularly sampled data. The method is based on the framework of normalized convolution (NC), in which the local signal is approximated through a projection onto a subspace. The use of polynomial basis functions in this paper makes NC equivalent to
Active Absorption Wave Maker System for Irregular Waves
柳淑学; 王先涛; 李木国; 郭美谊
2003-01-01
The key problem in physical model tests with highly reflective structures is to prevent the multiple reflections between the reflective structures and the wave maker. An active absorption wave maker system is described and the representative frequency method for irregular waves is proposed in this paper. Physical model tests are conducted to verify the effectiveness of the proposed method.
Ergonomics: safe patient handling and mobility.
Hallmark, Beth; Mechan, Patricia; Shores, Lynne
2015-03-01
This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care.
Enclosure for handling high activity materials
Jimeno de Osso, F.
1977-07-01
One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)
Ergonomic handle for an arthroscopic cutter.
Tuijthof; van Engelen; Herder; Goossens; Snijders; van Dijk
2003-03-01
From an analysis of the routinely performed meniscectomy procedures, it was concluded that a punch with a side-ways steerable tip would improve the reachability of meniscal tissue. This potentially leads to a safer and more efficient meniscectomy. Furthermore, the current scissors handles of arthroscopic punches are ergonomically not sufficient. An ergonomic handle is designed with one lever that enables opening and closing of the instrument tip, and side-ways steering of the instrument tip. The design of the handle complies with ergonomic guidelines that were found in the literature. A model of the instrument tip was added to the new handle for comparison with conventional handles. Experiments were performed with a knee joint model, using objective and subjective criteria. The results show that the concept of a side-ways steerable punch is promising, since faster task times are achieved without increasing the risk of damaging healthy tissue. The current design of the ergonomic handle incorporates two degrees of freedom in an intuitive way, the handle is more comfortable to hold, and easy to control. The external memory capabilities of the new handle could be improved. Further development of this handle and the addition of a sufficient instrument tip and force transmission are recommended.
Hagedorn, Claudia; Baiker, Armin; Postberg, Jan; Ehrhardt, Anja; Lipps, Hans J
2012-06-01
Nonviral episomal vectors represent attractive alternatives to currently used virus-based expression systems. In the late 1990s, it was shown that a plasmid containing an expression cassette linked to a scaffold/matrix attached region (S/MAR) replicates as a low copy number episome in all cell lines tested, as well as primary cells, and can be used for the genetic modification of higher animals. Once established in the cell, the S/MAR vector replicates early during S-phase and, in the absence of selection, is stably retained in the cells for an unlimited period of time. This vector can therefore be regarded as a minimal model system for studying the epigenetic regulation of replication and functional nuclear architecture. In theory, this construct represents an almost "ideal" expression system for gene therapy. In practice, S/MAR-based vectors stably modify mammalian cells with efficiencies far below those of virus-based constructs. Consequently, they have not yet found application in gene therapy trials. Furthermore, S/MAR vector systems are not trivial to handle and several critical technical issues have to be considered when modifying these vectors for various applications.
Zimmerling, J.T.; Wei, L.; Urbach, H.P.; Remis, R.F.
2016-01-01
We present a Krylov model-order reduction approach to efficiently compute the spontaneous decay (SD) rate of arbitrarily shaped 3D nanosized resonators. We exploit the symmetry of Maxwell’s equations to efficiently construct so-called reduced-order models that approximate the SD rate of a quantum
A.F. van Belkum (Alex); H. Maas (Hugo); H.A. Verbrugh (Henri); N. van Leeuwen (N.)
1996-01-01
textabstractFifty clinical and environmental isolates of Legionella pneumophila were typed serologically and by DNA fingerprinting using arbitrarily primed polymerase chain reaction (AP-PCR). Furthermore, variability in and around ribosomal operons was assessed by conventional ribotyping and PCR-med
Research on Event Handling Models of Java
WU Yue; WU Jing; ZHOU Ming-tian
2004-01-01
A new event-handling paradigm and its application model are proposed. The working mechanism and principle of event listener model is given in detail. Finally, the launching event mechanisms,the choosing event handling models and the dispatching mechanism are illustrated.
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.19 Section 3.19 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Dogs...
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.41 Section 3.41 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.92 Section 3.92 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.66 Section 3.66 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment and Transportation of...
29 CFR 1917.18 - Log handling.
2010-07-01
... 29 Labor 7 2010-07-01 2010-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...
38 CFR 1.660 - Expeditious handling.
2010-07-01
... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Expeditious handling. 1.660 Section 1.660 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS GENERAL PROVISIONS Inventions by Employees of Department of Veterans Affairs § 1.660 Expeditious handling. No patent...
30 CFR 715.16 - Topsoil handling.
2010-07-01
... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Topsoil handling. 715.16 Section 715.16 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR INITIAL PROGRAM REGULATIONS GENERAL PERFORMANCE STANDARDS § 715.16 Topsoil handling. To prevent topsoil from being...
2010-01-01
... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...
Information Handling, Organizational Structure, and Power.
Buckland, Michael K.
1989-01-01
Uses examples from military strategic communications to demonstrate that organizational structures and the distribution of power within organizational structures adapt to changes in information handling capability. It is concluded that delegation and decentralization can be viewed as indicative of inadequate information handling and that improved…
Storage and Handling of Commercially Packaged Foods
Villalba, Abigail; Boyer, Renee Raiden; Bazemore, Sherry
2005-01-01
Proper selection of foods at the grocery store and appropriate storage and handling practices at home are necessary to maintain the quality and safety of commercially processed foods and perishable foods. This brochure offers some guidelines to follow when buying, handling, and storing packaged foods.
Material Handling Equipment Evaluation for Crater Repair
2016-11-01
material handling equipment with a reduced logistical footprint for use by crater repair teams in airfield damage repair (ADR) scenarios. A market ...compared to currently utilized material handling equipment. This report presents the results of the market survey and equipment evaluations. Results...1 1.2 Objective and scope
Feasibility of Upper Port Plug tube handling
Koning, J.F.; Elzendoorn, B.S.Q.; Ronden, D.M.S.; Klinkhamer, J.F.F.; Biel, W.; Krasikov, Y.; Walker, C.I.
2011-01-01
Central, retractable tubes are proposed in several Upper Port Plugs (UPPs) designs for ITER, to enable fast exchange of specific components of diagnostics housed in these UPPs. This paper investigates into possible designs to enable the efficient handling of tubes. The feasibility of tube handling i
7 CFR 765.151 - Handling payments.
2010-01-01
... 7 Agriculture 7 2010-01-01 2010-01-01 false Handling payments. 765.151 Section 765.151 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS DIRECT LOAN SERVICING-REGULAR Borrower Payments § 765.151 Handling payments. (a) Borrower...
Reducing Mouse Anxiety during Handling: Effect of Experience with Handling Tunnels
Kelly Gouveia; Hurst, Jane L.
2013-01-01
Handling stress is a well-recognised source of variation in animal studies that can also compromise the welfare of research animals. To reduce background variation and maximise welfare, methods that minimise handling stress should be developed and used wherever possible. Recent evidence has shown that handling mice by a familiar tunnel that is present in their home cage can minimise anxiety compared with standard tail handling. As yet, it is unclear whether a tunnel is required in each home c...
Finding Causes of Irregular Headways Integrating Data Mining and AHP
Shi An
2015-11-01
Full Text Available Irregular headways could reduce the public transit service level heavily. Finding out the exact causes of irregular headways will greatly help to develop efficient strategies aiming to improve transit service quality. This paper utilizes bus GPS data of Harbin to evaluate the headway performance and proposes a statistical method to identify the abnormal headways. Association mining is used to dig deeper and recognize six causes of bus bunching. The AHP, embedded data analysis, is applied to determine the weight of each cause in the case of that these causes are combined with each other constantly. Results show that the front bus has a greater effect on bus bunching than the following bus, and the traffic condition is the most critical factor affecting bus headway.
Irregular Migration - between legal status and social practices
Lund Thomsen, Trine
2012-01-01
. Language and religious affiliations of an immigrant adolescent in Norway by Haque, Shahzaman View Top 20 Most Downloaded Articles Previous Article Next Article Go to table of contents Download full text pdf (PDF, 425 KB) Irregular Migration – Between Legal Status and Social Practices Narratives of Polish...... labour migration Thomsen, Trine Lund1 1Centre for the Studies of Migration and Diversity (CoMID), Aalborg University, Denmark Citation Information: Nordic Journal of Migration Research. Volume 2, Issue 4, Pages 308–315, ISSN (Online) 1799-649X, ISSN (Print) , DOI: 10.2478/v10202-012-0001-0, December 2012...... Publication History: Published Online: 2012-12-28 Abstract How do Polish migrant workers experience the process of migration and how does irregular migration status influence their life plans? In this article I analyse how the shifts between different legal statuses may be related to the social practices...
Searching for Strange Attractor in Sliver Irregularity Series
YAO Jie; ZHONG Zai-min; CHEN Ren-zhe; YE Guo-ming
2007-01-01
The chaotic nonlinear time series method isapplied to analyze the sliver irregularity in textileprocessing. Because it unifies the system's determinacy andrandonmess, it seems more adaptive to describe the sliverirregularity than conventional methods. Firstly, the chaoscharacter, i. e. fractal dimension, positive Lyapunovexponent, and state space parameters, including time delayand reconstruction dimension, are calculated respectively.As a result, a positive Lyapunov exponent and a fractaldimension are obtained, which demonstrates that the systemis chaotic in fact. Secondly, both local linear forecast andglobal forecast models based on the reconstructed state areadopted to predict a segment part of the sliver irregularityseries, which proves the validity of this analysis.Therefore, the sliver irregularity series shows the evidenceof chaotic phenomena, and thus laying the theoreticalfoundation for analyzing and modeling the sliver irregularityseries by applying the chaos theory, and providing a newway to understand the complexity of the sliver irregularitymuch better.
An analysis of the timing irregularities for 366 pulsars
Hobbs, G; Kramer, M
2009-01-01
We provide an analysis of timing irregularities observed for 366 pulsars. Observations were obtained using the 76-m Lovell radio telescope at the Jodrell Bank Observatory over the past 36 years. These data sets have allowed us to carry out the first large-scale analysis of pulsar timing noise over time scales of > 10yr, with multiple observing frequencies and for a large sample of pulsars. Our sample includes both normal and recycled pulsars. The timing residuals for the pulsars with the smallest characteristic ages are shown to be dominated by the recovery from glitch events, whereas the timing irregularities seen for older pulsars are quasi-periodic. We emphasise that previous models that explained timing residuals as a low-frequency noise process are not consistent with observation.
Constructing C1 Continuous Surface on Irregular Quad Meshes
HE Jun; GUO Qiang
2013-01-01
A new method is proposed for surface construction on irregular quad meshes as extensions to uniform B-spline surfaces. Given a number of control points, which form a regular or irregular quad mesh, a weight function is constructed for each control point. The weight function is defined on a local domain and is C1 continuous. Then the whole surface is constructed by the weighted combination of all the control points. The property of the new method is that the surface is defined by piecewise C1 bi-cubic rational parametric polynomial with each quad face. It is an extension to uniform B-spline surfaces in the sense that its definition is an analogy of the B-spline surface, and it produces a uniform bi-cubic B-spline surface if the control mesh is a regular quad mesh. Examples produced by the new method are also included.
The scholarly rebellion of the early Baker Street Irregulars
George Mills
2017-03-01
Full Text Available This work provides and analyzes an early institutional history of the pioneering Sherlock Holmes American fan club, the Baker Street Irregulars (BSI. Using the publications and records of these devoted Sherlockians, I track the BSI's development from a speakeasy gathering in 1934 to a national organization by the mid-1940s. This growth was built on a foundation of Victorian nostalgia and playful humor. Yet at the same time the members of the Irregulars took their fandom seriously, producing Sherlockian scholarship and creating an infrastructure of journals, conferences, and credentialing that directly mimicked the academy. They positioned themselves in contrast to prevailing scholarly practices of the period, such as New Criticism. I trace both how their fan practices developed over time and how this conflict with the academy led to many of the BSI's defining characteristics.
An Amino Acid Code for Irregular and Mixed Protein Packing
Joo, Hyun; Chavan, Archana; Fraga, Keith; Tsai, Jerry
2015-01-01
To advance our understanding of protein tertiary structure, the development of the knob-socket model is completed in an analysis of the packing in irregular coil and turn secondary structure packing as well as between mixed secondary structure. The knob-socket model simplifies packing based on repeated patterns of 2 motifs: a 3 residue socket for packing within 2° structure and a 4 residue knob-socket for 3° packing. For coil and turn secondary structure, knob-sockets allow identification of a correlation between amino acid composition and tertiary arrangements in space. Coil contributes almost as much as α-helices to tertiary packing. Irregular secondary structure involves 3 residue cliques of consecutive contacting residues or XYZ sockets. In irregular sockets, Gly, Pro, Asp and Ser are favored, while Cys, His, Met and Trp are not. For irregular knobs, the preference order is Arg, Asp, Pro, Asn, Thr, Leu, and Gly, while Cys, His, Met and Trp are not. In mixed packing, the knob amino acid preferences are a function of the socket that they are packing into, whereas the amino acid composition of the sockets does not depend on the secondary structure of the knob. A unique motif of a coil knob with an XYZ β-sheet socket may potentially function to inhibit β-sheet extension. In addition, analysis of the preferred crossing angles for strands within a β-sheet and mixed α-helices/β-sheets identifies canonical packing patterns useful in protein design. Lastly, the knob-socket model abstracts the complexity of protein tertiary structure into an intuitive packing surface topology map. PMID:26370334
Using Little's Irregularity Index in orthodontics: outdated and inaccurate?
Macauley, Donal
2012-12-01
Little\\'s Irregularity Index (LII) was devised to objectively score mandibular incisor alignment for epidemiological studies but has been extended to assess the relative performance of orthodontic brackets, retainer or treatment modalities. Our aim was to examine the repeatability and precision of LII measurements of four independent examiners on the maxillary arch of orthodontic patients. The hypothesis was that the reproducibility of individual contact point displacement measurements, used to calculate the LII score, are inappropriate.
New Secular Resonances Involving the Irregular Satellies of Saturn
Cuk, M.; Burns, J. A.; Carruba, V.; Nicholson, P. D.; Jacobson, R. A.
2002-09-01
We report that some of the recently found irregular satellites of Saturn, and possibly Uranus, dwell in hitherto unobserved resonances. These include the Kozai resonance, previously postulated but never before found in our Solar System. We also describe a new type of secular resonance for irregular satellites at higher inclinations (40-45o ), which locks the satellite's pericenter with that of the planet. Comparing theoretical predictions (Carruba et al. 2002)with the orbits of those Saturnian irregulars having inclinations around 45o , we found that Saturn's 2000_S5 and 2000_S6 have extremely slow motions of their arguments of pericenter, and their pericenters are presently almost 90 degrees away from their nodes (Jacobson 2001). Longitude of pericenter of another prograde satellite of Saturn, 2000_S3, precesses extremely slowly (Jacobson 2001). We simulated the motion of a clone of 2000_S3 and found that its longitude of pericenter could be librating around that of Saturn, with a very long period (on the order of 30,000 years) and large amplitude (120o ). The nature of this resonance appears different from one affecting certain Jovian moons (Saha and Tremaine 1993). If the amplitude of pericenter librations can be that large, another Saturnian irregular, 2000_S2, could be in a similar resonance. The Uranian retrograde satellites Stephano and Caliban (at inclinations of about 140o ) also have ϖ's that precess very slowly and are roughly aligned with Uranus's (Jacobson 2000). We are currently examining their motion to see if they are also in a resonance similar to that seen at 2000_S3.
Multicolor Photometry of the Uranus Irregular Satellites Sycorax and Caliban
Maris, M; Cremonese, G; Fulle, M; Maris, Michele; Carraro, Giovanni; Cremonese, Gabriele; Fulle, Marco
2001-01-01
We report on accurate BVRI photometry for the two Uranus irregular satellites Sycorax and Caliban. We derive colours, showing that Sycorax is bluer than Caliban. Our data allows us to detect a significant variability in the Caliban's light-curve, which suggests an estimated period of about 3 hours. Despite it is the brighter of the two bodies, Sycorax does not display a strong statistically significant variability. However our data seem to suggest a period of about 4 hours
Generalizing Lifted Tensor-Product Wavelets to Irregular Polygonal Domains
Bertram, M.; Duchaineau, M.A.; Hamann, B.; Joy, K.I.
2002-04-11
We present a new construction approach for symmetric lifted B-spline wavelets on irregular polygonal control meshes defining two-manifold topologies. Polygonal control meshes are recursively refined by stationary subdivision rules and converge to piecewise polynomial limit surfaces. At every subdivision level, our wavelet transforms provide an efficient way to add geometric details that are expanded from wavelet coefficients. Both wavelet decomposition and reconstruction operations are based on local lifting steps and have linear-time complexity.
Irregular and adaptive sampling for automatic geophysic measure systems
Avagnina, Davide; Lo Presti, Letizia; Mulassano, Paolo
2000-07-01
In this paper a sampling method, based on an irregular and adaptive strategy, is described. It can be used as automatic guide for rovers designed to explore terrestrial and planetary environments. Starting from the hypothesis that a explorative vehicle is equipped with a payload able to acquire measurements of interesting quantities, the method is able to detect objects of interest from measured points and to realize an adaptive sampling, while badly describing the not interesting background.
Extending ALE3D, an Arbitrarily Connected hexahedral 3D Code, to Very Large Problem Size (U)
Nichols, A L
2010-12-15
As the number of compute units increases on the ASC computers, the prospect of running previously unimaginably large problems is becoming a reality. In an arbitrarily connected 3D finite element code, like ALE3D, one must provide a unique identification number for every node, element, face, and edge. This is required for a number of reasons, including defining the global connectivity array required for domain decomposition, identifying appropriate communication patterns after domain decomposition, and determining the appropriate load locations for implicit solvers, for example. In most codes, the unique identification number is defined as a 32-bit integer. Thus the maximum value available is 231, or roughly 2.1 billion. For a 3D geometry consisting of arbitrarily connected hexahedral elements, there are approximately 3 faces for every element, and 3 edges for every node. Since the nodes and faces need id numbers, using 32-bit integers puts a hard limit on the number of elements in a problem at roughly 700 million. The first solution to this problem would be to replace 32-bit signed integers with 32-bit unsigned integers. This would increase the maximum size of a problem by a factor of 2. This provides some head room, but almost certainly not one that will last long. Another solution would be to replace all 32-bit int declarations with 64-bit long long declarations. (long is either a 32-bit or a 64-bit integer, depending on the OS). The problem with this approach is that there are only a few arrays that actually need to extended size, and thus this would increase the size of the problem unnecessarily. In a future computing environment where CPUs are abundant but memory relatively scarce, this is probably the wrong approach. Based on these considerations, we have chosen to replace only the global identifiers with the appropriate 64-bit integer. The problem with this approach is finding all the places where data that is specified as a 32-bit integer needs to be
Photometry of Irregular Satellites of Uranus and Neptune
Grav, Tommy; Holman, Matthew J.; Fraser, Wesley C.
2004-09-01
We present BVR photometric colors of six Uranian and two Neptunian irregular satellites, collected using the Magellan Observatory (Las Campanas, Chile) and the Keck Observatory (Manua Kea, Hawaii). The colors range from neutral to light red, and like the Jovian and the Saturnian irregular satellites (Grav et al.) there is an apparent lack of the extremely red objects found among the Centaurs and Kuiper Belt objects. The Uranian irregular satellites can be divided into three possible dynamical families, but the colors collected show that two of these dynamical families, the Caliban and Sycorax clusters, have heterogeneous colors. Of the third possible family, the 168° cluster containing two objects with similar average inclinations but quite different average semimajor axes, only one object (U XXI Trinculo) was observed. The heterogeneous colors and the large dispersion of the average orbital elements lead us to doubt that they are collisional families. We favor single captures as a more likely scenario. The two Neptunian satellites observed (N II Nereid and S/2002 N1) both have very similar neutral, Sun-like colors. Together with the high collisional probability between these two objects over the age of the solar system (Nesvorný et al.; Holman et al.), this suggests that S/2002 N1 is a fragment of Nereid, broken loose during a collision or cratering event with an undetermined impactor.
Flow induced vibrations in arrays of irregularly spaced cylinders
Taub, Gordon; Michelin, Sébastien
2014-11-01
Historically the main industrial applications of cylinder arrays in cross flows favored regular arrangements of cylinders. For this reason, most past studies of Flow Induced Vibrations (FIV) in large cylinder arrays have focused on such arrangements. Recently there has been some interest in generating renewable energy using FIV of bluff bodies. In such applications it will likely be beneficial to enhance, rather than suppress FIV. It is not known a priori if regular or irregularly spaced arrays are most adequate for this type of application. In this study, wind tunnel experiments were conducted on one regularly spaced array and four different irregularly spaced arrays of cylinders in a cross flow. Each arrangement of cylinders was examined under eight different orientations to a cross flow ranging between 10 m/s and 17 m/s. The average amplitude of vibration of the cylinders was found to highly depend on arrangement and orientation. The typical amplitude of vibration of the rods in the irregular arrangements were found to be an order of magnitude larger than that of the regular array. A simple model was proposed in order to predict if a given arrangement was likely to produce large oscillations, and the validity of the model was examined. This research was supported by a Marie Curie International Reintegration Grant within the 7th European Community Framework Program (Grant PIRG08-GA-2010-276762).
Histogram Planimetry Method for the Measurement of Irregular Wounds.
Yesiloglu, Nebil; Yildiz, Kemalettin; Cem Akpinar, Ali; Gorgulu, Tahsin; Sirinoglu, Hakan; Ozcan, Arzu
2016-09-01
Irregularly shaped wounds or flap borders usually require specified software or devices to measure their area and follow-up wound healing. In this study, an easy way of area measurement called histogram planimetry (HP) for wounds with irregular geometric shapes is defined and compared to conventional millimetric wound measurement. Ten irregularly bordered geometric shapes were measured by 4 different individuals working as surgical assistants using both HP and manual millimetric measurement tools. The amount of time for each wound shape calculation as well as the measurements of the wound areas were noted. All measurements were compared for each method and between each individual using the Wilcoxon signed-rank test. There was no statistically significant difference between 2 measurement methods by means of measured areas; however, measurement time was significantly lower when the HP method was used. There also was no significant difference between the individuals' measurements and calculation times. These results indicated that HP is useful as a conventional millimetric square wound measurement technique with significantly lower measurement times. Due to the development of photo-editor software technologies, measurements in the surgical field have become more accurate and rapid than conventional manual methods without consuming the time and energy needed for other studies. A future study including comparisons between the presented method and complex computerized measurement methods, in terms of duration and accuracy, may provide additional supportive data for the authors' method.
Using a Calculated Pulse Rate with an Artificial Neural Network to Detect Irregular Interbeats.
Yeh, Bih-Chyun; Lin, Wen-Piao
2016-03-01
Heart rate is an important clinical measure that is often used in pathological diagnosis and prognosis. Valid detection of irregular heartbeats is crucial in the clinical practice. We propose an artificial neural network using the calculated pulse rate to detect irregular interbeats. The proposed system measures the calculated pulse rate to determine an "irregular interbeat on" or "irregular interbeat off" event. If an irregular interbeat is detected, the proposed system produces a danger warning, which is helpful for clinicians. If a non-irregular interbeat is detected, the proposed system displays the calculated pulse rate. We include a flow chart of the proposed software. In an experiment, we measure the calculated pulse rates and achieve an error percentage of pulse rates to detect irregular interbeats, we find such irregular interbeats in eight participants.
Transnational activities and aspirations of irregular migrants in Belgium and the Netherlands
M.J. van Meeteren (Masja)
2012-01-01
textabstractThe literature on immigrant transnationalism and on irregular immigration suggests irregular migrants engage relatively little in transnational activities because of the obstacles associated with their legal and economic statuses. Drawing on participant observation and in-depth interview
A.S. Leerkes (Arjen); G.B.M. Engbersen (Godfried); M.R.P.J.R.S. van San (Marion)
2007-01-01
textabstractSummary: In Western countries, irregular immigrants constitute a sizeable segment of the population. By combining quantitative and qualitative research methods, this article describes and explains irregular immigrants’ patterns of spatial concentration and incorporation in the Netherland
Clark, I.C; Hancox, M
2012-01-01
... --Turning and manoeuvring modern anchor handling vessels --The AHTS design and towing operations --The dangers of very high speed loads during deep water anchor handling operations --The dangers...
Refraction traveltime tomography with irregular topography using the unwrapped phase inversion
Choi, Yun Seok
2013-01-01
Traveltime tomography has long served as a stable and efficient tool for velocity estimation, especially for the near surface. It, however, suffers from some of limitations associated with ray tracing and high-frequency traveltime in velocity inversion zones and ray shadow regions. We develop a tomographic approach based on traveltime solutions obtained by tracking the phase (instantaneous traveltime) of the wavefield solution of the Helmholtz wave equation. Since the instantaneous-traveltime does not suffer from phase wrapping, the inversion algorithm using the instantaneous-traveltime has the potential to generate robust inversion results. With a high damping factor, the instantaneous-traveltime inversion provides refraction tomography similar results, but from a single frequency. Despite the Helmholtz-based solver implementation, the tomographic inversion handles irrgular topography. The numerical examples show that our inversion algorithm generates a convergent smooth velocity model, which looks very much like a tomographic result. Next, we plan to apply the instantaneous-traveltime inversion algorithm to real seismic data acquired from the near surface with irregular topography.
Fernández-Nieto, E D; Narbona-Reina, G; Zabsonré, J D
2015-01-01
In this work we present a deduction of the Saint-Venant-Exner model through an asymptotic analysis of the Navier-Stokes equations. A multi-scale analysis is performed in order to take into account that the velocity of the sediment layer is smaller than the one of the fluid layer. This leads us to consider a shallow water type system for the fluid layer and a lubrication Reynolds equation for the sediment one. This deduction provides some improvements with respect to the classical Saint-Venant-Exner model: (i) the deduced model has an associated energy. Moreover, it allows us to explain why classical models do not have an associated energy and how to modify them in order to recover a model with this property. (ii) The model incorporates naturally a necessary modification that must be taken into account in order to be applied to arbitrarily sloping beds. Furthermore, we show that this modification is different of the ones considered classically, and that it coincides with a classical one only if the solution ha...
J. Strečka
2012-12-01
Full Text Available The ferrimagnetic spin-1/2 chain composed of alternating Ising and Heisenberg spins in an arbitrarily oriented magnetic field is exactly solved using the spin-rotation transformation and the transfer-matrix method. It is shown that the low-temperature magnetization process depends basically on a spatial orientation of the magnetic field. A sharp stepwise magnetization curve with a marked intermediate plateau, which emerges for the magnetic field applied along the easy-axis direction of the Ising spins, becomes smoother and the intermediate plateau shrinks if the external field is tilted from the easy-axis direction. The magnetization curve of a polycrystalline system is also calculated by performing powder averaging of the derived magnetization formula. The proposed spin-chain model brings an insight into high-field magnetization data of 3d-4f bimetallic polymeric compound Dy(NO3(DMSO2Cu(opba(DMSO2, which provides an interesting experimental realization of the ferrimagnetic chain composed of two different but regularly alternating spin-1/2 magnetic ions Dy3+ and Cu2+ that are reasonably approximated by the notion of Ising and Heisenberg spins, respectively.
Tropp, James
The first-order theory of a low-pass bird-cage resonator perturbed at a single capacitor [J. Tropp, J. Magn. Reson.82, 51 (1989)] is extended by explicit calculation to cover a low-pass bird cage perturbed arbitrarily at every reactance, provided that a first-order condition is satisfied. It is shown that the effect of arbitrary perturbation, i.e., the splitting of resonances and rotation of the polarization axes, can be exactly mimicked (in first order) by a pair of capacitors spaced by an azimuth of {π}/{4}. This result may be extended by symmetry arguments to the high-pass and simple band-pass bird cage. A method of correcting symmetry (abolishing the splitting of the useful eigenstates) is then derived, which provides near-perfect correction by the application of two capacitors, typically spaced {π}/{4} on the resonator azimuth. Experimental results are given for a low-pass bird-cage; and the correction procedure is verified and demonstrated in practical detail; and it is shown that the limit of the first-order theory is that the first of the two requisite correction capacitors should be within 7 or 8% of the nominal bird-cage capacitance. Practical examples of symmetry correction outside the first-order regime are also given.
Epstein, Ariel; Wong, Joseph P S; Eleftheriades, George V
2016-01-21
One of the long-standing problems in antenna engineering is the realization of highly directive beams using low-profile devices. In this paper, we provide a solution to this problem by means of Huygens' metasurfaces (HMSs), based on the equivalence principle. This principle states that a given excitation can be transformed to a desirable aperture field by inducing suitable electric and (equivalent) magnetic surface currents. Building on this concept, we propose and demonstrate cavity-excited HMS antennas, where the single-source-fed cavity is designed to optimize aperture illumination, while the HMS facilitates the current distribution that ensures phase purity of aperture fields. The HMS breaks the coupling between the excitation and radiation spectra typical to standard partially reflecting surfaces, allowing tailoring of the aperture properties to produce a desirable radiation pattern, without incurring edge-taper losses. The proposed low-profile design yields near-unity aperture illumination efficiencies from arbitrarily large apertures, offering new capabilities for microwave, terahertz and optical radiators.
Sakellariou, Konstantinos; McCullough, Michael; Stemler, Thomas; Small, Michael
2016-12-01
We are motivated by real-world data that exhibit severe sampling irregularities such as geological or paleoclimate measurements. Counting forbidden patterns has been shown to be a powerful tool towards the detection of determinism in noisy time series. They constitute a set of ordinal symbolic patterns that cannot be realised in time series generated by deterministic systems. The reliability of the estimator of the relative count of forbidden patterns from irregularly sampled data has been explored in two recent studies. In this paper, we explore highly irregular sampling frequency schemes. Using numerically generated data, we examine the reliability of the estimator when the sampling period has been drawn from exponential, Pareto and Gamma distributions of varying skewness. Our investigations demonstrate that some statistical properties of the sampling distribution are useful heuristics for assessing the estimator's reliability. We find that sampling in the presence of large chronological gaps can still yield relatively accurate estimates as long as the time series contains sufficiently many densely sampled areas. Furthermore, we show that the reliability of the estimator of forbidden patterns is poor when there is a high number of sampling intervals, which are larger than a typical correlation time of the underlying system.
How the NWC handles software as product
Vinson, D.
1997-11-01
This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.
Handling of bulk solids theory and practice
Shamlou, P A
1990-01-01
Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater
Reducing mouse anxiety during handling: effect of experience with handling tunnels.
Gouveia, Kelly; Hurst, Jane L
2013-01-01
Handling stress is a well-recognised source of variation in animal studies that can also compromise the welfare of research animals. To reduce background variation and maximise welfare, methods that minimise handling stress should be developed and used wherever possible. Recent evidence has shown that handling mice by a familiar tunnel that is present in their home cage can minimise anxiety compared with standard tail handling. As yet, it is unclear whether a tunnel is required in each home cage to improve response to handling. We investigated the influence of prior experience with home tunnels among two common strains of laboratory mice: ICR(CD-1) and C57BL/6. We compared willingness to approach the handler and anxiety in an elevated plus maze test among mice picked up by the tail, by a home cage tunnel or by an external tunnel shared between cages. Willingness to interact with the handler was much greater for mice handled by a tunnel, even when this was unfamiliar, compared to mice picked up by the tail. Once habituated to handling, C57BL/6 mice were most interactive towards a familiar home tunnel, whereas the ICR strain showed strong interaction with all tunnel handling regardless of any experience of a home cage tunnel. Mice handled by a home cage or external tunnel showed less anxiety in an elevated plus maze than those picked up by the tail. This study shows that using a tunnel for routine handling reduces anxiety among mice compared to tail handling regardless of prior familiarity with tunnels. However, as home cage tunnels can further improve response to handling in some mice, we recommend that mice are handled with a tunnel provided in their home cage where possible as a simple practical method to minimise handling stress.
A. M. Lastres - Aleaga
2010-05-01
Full Text Available ResumenEn el presente artículo se realiza un estudio de diferentes esquemas de solución reflejados en laliteratura, que tratan el problema de la distribución de piezas irregulares en superficies planas conanidamiento bidimensional (Nesting. Fueron analizados diferentes esquemas de solución, siendolos que consideran la geometría real de la pieza, durante la evaluación y posicionamiento de lasmismas sobre la superficie a cortar, los que garantizan el mayor aprovechamiento del material. Elesquema propuesto se caracteriza por un tratamiento gráfico de las piezas que permite acelerar elproceso de reconocimiento y evaluación de opciones de acoplamiento entre ellas, así como lacreación de poblaciones de conglomerados crecientes para su ubicación definitiva en la superficie acortar. En la generación de poblaciones de opciones de solución, se utiliza un algoritmo derivado delmétodo de Integración de Variables, además se realiza la comparación de los resultados obtenidospor el método propuesto, con otros resultados generados por procedimientos desarrollados pordiferentes autores, alcanzando mejorar los valores de aprovechamiento de material y la reduccióndel tiempo de generación de soluciones.Palabras claves: Distribución de piezas irregulares en superficies; optimización; Métodos Evolutivos;_________________________________________________________________________AbstractIn this article, we study various solution schemes reported in the literature, which deal with theproblem of irregular parts distribution on flat surfaces with two-dimensional nesting. Different solutionschemes were analyzed, which they consider to be the real geometry of the part, during theevaluation and positioning them on the surface to be cut, ensuring the best use of the material. Theproposed scheme is characterized by a graphic treatment of the pieces that can accelerate theprocess of recognition and evaluation of options coupling between them, as well as
V. Bayona
2015-04-01
Full Text Available A numerical model based on Radial Basis Function-generated Finite Differences (RBF-FD is developed for simulating the Global Electric Circuit (GEC within the Earth's atmosphere, represented by a 3-D variable coefficient linear elliptic PDE in a spherically-shaped volume with the lower boundary being the Earth's topography and the upper boundary a sphere at 60 km. To our knowledge, this is (1 the first numerical model of the GEC to combine the Earth's topography with directly approximating the differential operators in 3-D space, and related to this (2 the first RBF-FD method to use irregular 3-D stencils for discretization to handle the topography. It benefits from the mesh-free nature of RBF-FD, which is especially suitable for modeling high-dimensional problems with irregular boundaries. The RBF-FD elliptic solver proposed here makes no limiting assumptions on the spatial variability of the coefficients in the PDE (i.e. the conductivity profile, the right hand side forcing term of the PDE (i.e. distribution of current sources or the geometry of the lower boundary.
Management of transport and handling contracts
Rühl, I
2004-01-01
This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.
Handling knowledge on osteoporosis - a qualitative study
Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim
2013-01-01
Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...... performed with 14 patients recruited from two English university hospitals and 12 patients from a Danish university hospital. Critical psychology was used as a theoretical framework for the data analysis, which aimed at shedding light on patients' ways of conducting everyday life with osteoporosis....... The themes that emerged from the analysis showed that life conditions influenced the way in which risk, pain and osteoporosis were handled. Everyday life was also influenced by patients' attitude to treatment. The patients who were experiencing emotional difficulties in handling osteoporosis were not those...
Live-trapping and handling brown bear
US Fish and Wildlife Service, Department of the Interior — This paper reports techniques developed to live trap and handle brown bears on the Kodiak National Wildlife Refuge. The brown bears (Ursus middendorffi) on the...
Aerobot Sampling and Handling System Project
National Aeronautics and Space Administration — Honeybee Robotics proposes to: ?Derive and document the functional and technical requirements for Aerobot surface sampling and sample handling across a range of...
2010-01-01
... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle....
How Do Search Engines Handle Chinese Queries?
Hong Cui
2005-10-01
Full Text Available The use of languages other than English has been growing exponentially on the Web. However, the major search engines have been lagging behind in providing indexes and search features to handle these languages. This article explores the characteristics of the Chinese language and how queries in this language are handled by different search engines. Queries were entered in two major search engines (Google and AlltheWeb and two search engines developed for Chinese (Sohu and Baidu. Criteria such as handling word segmentation, number of retrieved documents, and correct display and identification of Chinese characters were used to examine how the search engines handled the queries. The results showed that the performance of the two major search engines was not on a par with that of the search engines developed for Chinese.
GeoLab Sample Handling System Project
National Aeronautics and Space Administration — Develop a robotic sample handling/ manipulator system for the GeoLab glovebox. This work leverages from earlier GeoLab work and a 2012 collaboration with a...
Luciana C. C. B. Silva
2013-06-01
Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.
Development of standard components for remote handling
Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment
1998-04-01
The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)
Safety Training: "Manual Handling" course in September
Safety Training, HSE Unit
2016-01-01
The next "Manual Handling" course will be given, in French, on 26 September 2016. This course is designed for anyone required to carry out manual handling of loads in the course of their work. The main objective of this course is to adopt and apply the basic principles of physical safety and economy of effort. There are places available. If you are interested in following this course, please fill an EDH training request via our catalogue.
[Irregular secretion of prolactin in infertile women with normoprolactinemic galactorrhea].
Villanueva Díaz, Carlos A; Echavarria Sánchez, Mirna; Juárez Bengoa, Armando
2007-02-01
Abnormal frequency and pulse amplitud of prolactin secretion in micro and macroprolactinomas has been atributed to a dysfunctional tumoral lactotrope. Previous evidence suggests that non tumoral hyperprolactinemia is caused by a hypothalamic dysfunction. The regularity of prolactin secretion has not been studied with cuantitative methods in patients with normoprolactinemic galactorrhea (NPG) which could be considered an entity that precedes non tumoral and tumoral hyperprolactinemia. To analyze the 24-hour prolactin secretion pattern and its secretion regularity in a group of infertile women with normoprolactinemic galatorea. A transversal-comparative study was carried out in 6 infertile women with normoprolactinemic galactorrhea and 4 healthy women as controls. The 24 hour prolactin profile, the ratio night time mean concentration/daytime mean concentrattion (NM/DM ratio) and apparent entropy (Ap En, Ap En ratio) were compared in the two groups. Blunting of the nyctohemeral rythm and nocturn hyperprolactinaemia occurred in patients with normoprolactinemic galactorrhea (NPG). NM/DM ratio was lower in patients with NPG than in controls (1.28 +/- 0.25 vs. 1.75 +/- 0.05; p= 0.01). Higher irregularity of prolactin secretion was found in patients with NPG (ApEn: 0.853 +/- 0.158 vs 0.608 +/- 0.171, p=0.04; Ap En ratio: 0.839 +/- 0.11 vs 0.661 +/- 0.14; p=0.04). The irregularity of prolactin secretion in patients with NPG is not dependant on the presence of a pituitary tumour which suggests that a hypothalamic dysfunction underlies this condition. An irregular secretion and a higher daily mass production of prolactin in patients with NPG could explain both galactorrhea and infertility.
The sunspot cycle and ``auroral'' F layer irregularities
Aarons, J.; Kersley, L.; Rodger, A. S.
The use of the word ``aurora'' for many different observations at high latitudes has limited the concepts involved; this is particularly true for F region irregularities. Observations setting the position of the auroral oval (Starkov and Fel'dshtein, 1970) were made using primarily the 555.7-nm green line, which is emitted predominantly at E layer heights. These observations have shown that the change in position of the auroral oval for low values of Kp as a function of sunspot cycle is of the order of 1° to 2° between sunspot maximum and sunspot minimum. However, irregularities in the F region show much larger solar cycle variations in the locations of the equatorward boundary, typically 10°. A review of scintillation data indicates that at a given auroral latitude, the scintillation activity increases with sunspot number. In addition, for a constant scintillation intensity, the equatorward boundary moves to lower latitudes as sunspot maximum is approached. We review existing spread F studies and show that for quiet geomagnetic conductions, there is lower occurrence during years of low sunspot numbers than during years of high sunspot numbers. However, the spread F index, related to Δ f/f0F2, is higher during years of low sunspot number than during years of high sunspot number. We demonstrate that this apparent dichotomy can be reconciled by using a new method of normalizing the spread F index by the maximum electron concentration of the F layer. We briefly discuss the possible explanations for the observed solar cycle variations of irregularity occurrence in terms of the absolute values and gradients of electron concentration and the E region conductivity.
Irregular breakfast eating and health status among adolescents in Taiwan
Hsieh Yeu-Sheng
2006-12-01
Full Text Available Abstract Background Regular breakfast eating (RBE is an important contributor to a healthy lifestyle and health status. The aims of the present study were to evaluate the relationships among irregular breakfast eating (IRBE, health status, and health promoting behavior (HPB for Taiwanese adolescents. Methods A cross-sectional, descriptive design was used to investigate a cluster sample of 1609 (7th -12th grade adolescents located in the metropolitan Tao-Yuan area during the 2005 academic year. The main variables comprised breakfast eating pattern, body weight, and health promoting behaviors. Data were collected by a self-administered questionnaire. Results A total of 1609 participants were studied, 64.1% in junior high school and 35.9% in high school, boys (47.1% and girls (52.9% ranging in age from 12–20 years. Of the total participant population, 28.8% were overweight and nearly one quarter (23.6% reported eating breakfast irregularly during schooldays. The findings indicated that adolescents with RBE had a lower risk of overweight (OR for IRBE vs. RBE = 1.51, 95% CI: 1.12, 2.04, and that the odds of becoming overweight were 51% greater for IRBE than for RBE even after controlling for demographical and HPB variables. IRBE also was a strong indicator for HPB. However, the profile of the high-risk IRBE group was predominantly junior high schoolchildren and/or children living without both parents. Conclusion This study provides valuable information about irregular breakfast eating among adolescents, which is associated with being overweight and with a low frequency of health promoting behavior. School and family health promotion strategies should be used to encourage all adolescents to eat breakfast regularly.
HANDLING, STORAGE AND IRON ORE QUALITY
Fabiana Fonseca Fortes
2012-06-01
Full Text Available This paper aims to identify handling and storage impact in iron ore quality, in their physical and chemical characteristics most important for a mining. It is tried to show the interferences in iron ore quality caused by the handling equipment and stockpiling. The research is restricted to Complexo Vargem Grande (Vale. The timeline was demarcated based on the formation of stockpiling. The fieldwork enables data collection and distinction of the routine procedures of casual operations handling. The quantitative analysis is conducted by the statistical method. As a conclusion, handling and storage identified are able to insert changes in physical and chemical characteristics of iron ore. Storage contributes to reduce variability of silica and alumina concentrations, but contributes too particle size deterioration. The handling induces degradation and segregation. However, there is the possibility to decrease handling of the ore and to establish the ideal size of stocks on the system in study, improving the efficiency of the system and consequent in global costs.
Similarity estimators for irregular and age-uncertain time series
Rehfeld, K.; Kurths, J.
2014-01-01
Paleoclimate time series are often irregularly sampled and age uncertain, which is an important technical challenge to overcome for successful reconstruction of past climate variability and dynamics. Visual comparison and interpolation-based linear correlation approaches have been used to infer dependencies from such proxy time series. While the first is subjective, not measurable and not suitable for the comparison of many data sets at a time, the latter introduces interpolation bias, and both face difficulties if the underlying dependencies are nonlinear. In this paper we investigate similarity estimators that could be suitable for the quantitative investigation of dependencies in irregular and age-uncertain time series. We compare the Gaussian-kernel-based cross-correlation (gXCF, Rehfeld et al., 2011) and mutual information (gMI, Rehfeld et al., 2013) against their interpolation-based counterparts and the new event synchronization function (ESF). We test the efficiency of the methods in estimating coupling strength and coupling lag numerically, using ensembles of synthetic stalagmites with short, autocorrelated, linear and nonlinearly coupled proxy time series, and in the application to real stalagmite time series. In the linear test case, coupling strength increases are identified consistently for all estimators, while in the nonlinear test case the correlation-based approaches fail. The lag at which the time series are coupled is identified correctly as the maximum of the similarity functions in around 60-55% (in the linear case) to 53-42% (for the nonlinear processes) of the cases when the dating of the synthetic stalagmite is perfectly precise. If the age uncertainty increases beyond 5% of the time series length, however, the true coupling lag is not identified more often than the others for which the similarity function was estimated. Age uncertainty contributes up to half of the uncertainty in the similarity estimation process. Time series irregularity
Similarity estimators for irregular and age uncertain time series
Rehfeld, K.; Kurths, J.
2013-09-01
Paleoclimate time series are often irregularly sampled and age uncertain, which is an important technical challenge to overcome for successful reconstruction of past climate variability and dynamics. Visual comparison and interpolation-based linear correlation approaches have been used to infer dependencies from such proxy time series. While the first is subjective, not measurable and not suitable for the comparison of many datasets at a time, the latter introduces interpolation bias, and both face difficulties if the underlying dependencies are nonlinear. In this paper we investigate similarity estimators that could be suitable for the quantitative investigation of dependencies in irregular and age uncertain time series. We compare the Gaussian-kernel based cross correlation (gXCF, Rehfeld et al., 2011) and mutual information (gMI, Rehfeld et al., 2013) against their interpolation-based counterparts and the new event synchronization function (ESF). We test the efficiency of the methods in estimating coupling strength and coupling lag numerically, using ensembles of synthetic stalagmites with short, autocorrelated, linear and nonlinearly coupled proxy time series, and in the application to real stalagmite time series. In the linear test case coupling strength increases are identified consistently for all estimators, while in the nonlinear test case the correlation-based approaches fail. The lag at which the time series are coupled is identified correctly as the maximum of the similarity functions in around 60-55% (in the linear case) to 53-42% (for the nonlinear processes) of the cases when the dating of the synthetic stalagmite is perfectly precise. If the age uncertainty increases beyond 5% of the time series length, however, the true coupling lag is not identified more often than the others for which the similarity function was estimated. Age uncertainty contributes up to half of the uncertainty in the similarity estimation process. Time series irregularity
Reducing Inconsistent Rules Based on Irregular Decision Table
兰轶东; 张霖; 刘连臣
2004-01-01
In this paper, we study the problem of rule extraction from data sets using the rough set method. For inconsistent rules due to improper selection of split-points during discretization, and/or to lack of information, we propose two methods to remove their inconsistency based on irregular decision tables.By using these methods, inconsistent rules are eliminated as far as possible, without affecting the remaining consistent rules. Experimental test indicates that use of the new method leads to an improvement in the mean accuracy of the extracted rules.
Multicolor Photometry of the Uranus Irregular Satellites Sycorax and Caliban
Maris, Michele; Carraro, Giovanni; Cremonese, Gabriele; Fulle, Marco
2001-05-01
We report on accurate BVRI photometry for the two Uranian irregular satellites Sycorax and Caliban. We derive colors showing that Sycorax is bluer than Caliban. Our data allow us to detect a significant variability in Caliban's light curve, which suggests an estimated period of about 3 hr. Although it is the brighter of the two bodies, Sycorax does not display a strong, statistically significant variability. However, our data seem to suggest a period of about 4 hr. Based on observations carried out at ESO La Silla (Chile). See the Asteroid Properties Database (1993), http://pdssbn.astro.umd.edu/sbnhtml/.
Favelas y fraccionamientos irregulares en São Paulo1
Silva, Helena Menna Barreto; Ceneviva, Laura Vieira
2013-01-01
INTRODUCCIÓN: EL VIRAJE DE LOS AÑOS SETENTA Para las poblaciones de escasos recursos de São Paulo, la ocupación de terrenos en las favelas y en los fraccionamientos irregulares, o el arrendamiento de cuartos en los inmuebles deteriorados de la zona urbanizada (cortiços), constituyen desde hace varias décadas la única posibilidad de acceso a la vivienda. Hacia mediados de los años setenta, la situación alcanzó un nivel crítico. Para los cientos de miles de habitantes que habían adquirido terre...
Mapa MEGNO para satélites irregulares de Satuno
Moyano, M. M.; Leiva, A. M.
By implementing the elliptic restricted three-body model we obtain high resolution dynamical maps in the phase space region corresponding to that where Saturn's irregular satellites are currently found. The nature of the trajectories is characterized by the MEGNO chaos indicator (Cincotta P. and Simó C., 2000), which allows to identify regions of chaotic and quasi- periodic trajectories much faster than with other indicators (e.g. Lyapunov exponents). The results obtained allow to identify with great detail the boundaries of the regions of regular motion, chaotic motion, and substruc- tures associated to mean motion resonances. FULL TEXT IN SPANISH
El derecho al trabajo y los extranjeros irregulares
2010-01-01
El artículo analiza desde una perspectiva de derecho constitucional la situación en España de los trabajadores extranjeros irregulares, defiende que estos poseen un derecho al trabajo de rango constitucional e intenta delimitar el contenido de este derecho en relación al derecho al trabajo del que son titulares los españoles. Plantea como conclusión que el contenido de dicho derecho no tiene porqué coincidir con el de los españoles. De hecho, considera que difiere del de est...
Irregular subharmonic cluster patterns in an autonomous photoelectrochemical oscillator.
Miethe, Iljana; García-Morales, Vladimir; Krischer, Katharina
2009-05-15
Unusual subharmonic cluster patterns are observed during the oscillatory electro-oxidation of n-Si(111) under illumination. 2D in situ imaging of the electrode by means of an ellipsometric setup allows local variations in the oxide layer thickness to be monitored. The local oscillators exhibit an irregular distribution of the amplitude with the extrema locked to the constant base frequency of the total current. In addition, Ising 2-phase clustering occurs at half the base frequency. This intrinsic dynamics is described by means of a modified complex Ginzburg-Landau equation.
TCM Treatment for Gynaecological Diseases-Irregular Menstruation
Engin CAN
2008-01-01
@@ Menstruation is the periodic shedding(usually monthly)of the lining of the womb.Generally speaking,menstruation starts during puberty around 10-16 years old and continues until the menopause about 45-55 years old.An average menstrual cycle is about 28 days,but it may vary between 24-35 days.According to a study most women have more than 500 periods in a lifetime.Any abnormality of the above menstrual conditins can be regarded as irregular.
Similarity estimators for irregular and age uncertain time series
K. Rehfeld
2013-09-01
Full Text Available Paleoclimate time series are often irregularly sampled and age uncertain, which is an important technical challenge to overcome for successful reconstruction of past climate variability and dynamics. Visual comparison and interpolation-based linear correlation approaches have been used to infer dependencies from such proxy time series. While the first is subjective, not measurable and not suitable for the comparison of many datasets at a time, the latter introduces interpolation bias, and both face difficulties if the underlying dependencies are nonlinear. In this paper we investigate similarity estimators that could be suitable for the quantitative investigation of dependencies in irregular and age uncertain time series. We compare the Gaussian-kernel based cross correlation (gXCF, Rehfeld et al., 2011 and mutual information (gMI, Rehfeld et al., 2013 against their interpolation-based counterparts and the new event synchronization function (ESF. We test the efficiency of the methods in estimating coupling strength and coupling lag numerically, using ensembles of synthetic stalagmites with short, autocorrelated, linear and nonlinearly coupled proxy time series, and in the application to real stalagmite time series. In the linear test case coupling strength increases are identified consistently for all estimators, while in the nonlinear test case the correlation-based approaches fail. The lag at which the time series are coupled is identified correctly as the maximum of the similarity functions in around 60–55% (in the linear case to 53–42% (for the nonlinear processes of the cases when the dating of the synthetic stalagmite is perfectly precise. If the age uncertainty increases beyond 5% of the time series length, however, the true coupling lag is not identified more often than the others for which the similarity function was estimated. Age uncertainty contributes up to half of the uncertainty in the similarity estimation process. Time
Papadimitriou, Konstantinos; Boutou, Effrossyni; Zoumpopoulou, Georgia; Tarantilis, Petros A; Polissiou, Moschos; Vorgias, Constantinos E; Tsakalidou, Effie
2008-10-01
We have previously reported that an acid tolerance response (ATR) can be induced in Streptococcus macedonicus cells at mid-log phase after autoacidification, transient exposure to acidic pH, or acid habituation, as well as at stationary phase. Here, we compared the transcriptional profiles of these epigenetic phenotypes, by RNA arbitrarily primed PCR (RAP-PCR), and their whole-cell chemical compositions, by Fourier transform infrared spectroscopy (FT-IR). RAP-PCR fingerprints revealed significant differences among the phenotypes, indicating that gene expression during the ATR is influenced not only by the growth phase but also by the treatments employed to induce the response. The genes coding for the mannose-specific IID component, the 1,2-diacylglycerol 3-glucosyltransferase, the 3-oxoacyl-acyl carrier protein, the large subunit of carbamoyl-phosphate synthase, and a hypothetical protein were found to be induced at least under some of the acid-adapting conditions. Furthermore, principal component analysis of the second-derivative-transformed FT-IR spectra segregated S. macedonicus phenotypes individually in all spectral regions that are characteristic for major cellular constituents like the polysaccharides of the cell wall, fatty acids of the cell membrane, proteins, and other compounds that absorb in these regions. These findings provide evidence for major changes in cellular composition due to acid adaptation that were clearly different to some extent among the phenotypes. Overall, our data demonstrate the plasticity in the ATR of S. macedonicus, which reflects the inherent ability of the bacterium to adjust the response to the distinctiveness of the imposed stress condition, probably to maximize its adaptability.
In situ measurements of plasma irregularity growth in the cusp ionosphere
Oksavik, K.; Moen, J.; Lester, M.; Bekkeng, T. A.; Bekkeng, J. K.
2012-11-01
The Investigation of Cusp Irregularities (ICI-2) sounding rocket was launched on 5 December 2008 from Ny-Ålesund, Svalbard. The high-resolution rocket data are combined with data from an all-sky camera, the EISCAT Svalbard Radar, and the SuperDARN Hankasalmi radar. These data sets are used to characterize the spatial structure of F region irregularities in the dayside cusp region. We use the data set to test two key mechanisms for irregularity growth; the Kelvin-Helmholtz (KH) and gradient drift (GD) instabilities. Except for a promising interval of 4-6 km irregularities, the KH growth rate was found to be too slow to explain the observed plasma irregularities. The time history of the plasma gives further support that structured particle precipitation could be an important source of kilometer- to hectometer-scale “seed” irregularities, which are then efficiently broken down into decameter-scale irregularities by the GD mechanism.
Human Rights of Irregular Immigrants: A Challenge for the Universality of Human Rights
Luljeta Ikonomi
2013-07-01
Full Text Available Irregular immigration is a phenomenon with a substantial impact for the majority of the countries. The paper analyses whether there is an adequate human rights framework for protection of irregular immigrants or whether the irregular status exempts the migrants from the protection of international human rights law. If this is the case, then the human rights universality has failed. The paper takes into consideration the developments in the International and EU Law, as well as in the jurisprudence of the international tribunals regarding protection of irregular immigrants. It is divided into three main sections. The first section informs briefly on the dynamics of irregular immigrants; the second section analyses the legislation on irregular immigration from the perspective of the state sovereignty, the third section analyses the human rights law and the protection it affords to irregular immigrants, pursuant to the interpretation of International tribunals.
Ochirbat, G
2000-01-01
A plane medium, whose dielectric tensor's principal values arbitrarily depend upon intensity, is considered. The problems of the TM and TE waves, within the problem of light scattering, are reduced to quadrature. A question of integrability of the full system of Maxwell equations is discussed. A closed equation has been obtained for an auxiliary variable for a nonlinearity of Kerr type. A scheme for integrating the full system of Maxwell equations by solving the equation over the auxiliary variable is suggested.
Solidex 84 - modern technology in bulk solids handling
1984-01-01
Proceedings from Conference on solids handling. Sections which are of interest include coal and ash handling, and flow problems and explosion hazards in bulk handling plant. 14 papers have been abstracted separately.
7 CFR 948.23 - Handling for special purposes.
2010-01-01
... Order Regulating Handling Regulation § 948.23 Handling for special purposes. Upon the basis of....77, or any combination thereof, to facilitate handling of potatoes for (a) Relief or charity; (b...
7 CFR 959.53 - Handling for special purposes.
2010-01-01
... Regulating Handling Regulations § 959.53 Handling for special purposes. Regulations in effect pursuant to §§ 959.42, 959.52, or 959.60 may be modified, suspended, or terminated to facilitate handling of...
7 CFR 929.60 - Handling for special purposes.
2010-01-01
... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Reports and Records § 929.60 Handling... facilitate handling of excess cranberries for the following purposes: (a) Charitable institutions;...
Irregular Information of the Rainstorm in a Continuous Rainy Weather
LI; Ming-juan
2012-01-01
[Objective]The research aimed to analyze irregular information of the local rainstorm process (during 5-6 September,2009) in autumn continuous rainy weather in north Shaanxi. [Method] Based on V-3θ chart, routine observation data provided by Micaps system, satellite cloud chart and data at 100 automatic meteorological stations of Shaanxi, for rainstorm process in autumn continuous rainy weather in north Shaanxi during 4-10 September, 2009, by using structure analysis method, irregular information in local rainstorm weather was analyzed. [Result]In whole precipitation process, atmospheric structure in rainstorm zone presented obvious evolution process. Before precipitation, typical atmospheric structure information of the sudden convective weather appeared. Obvious ultra-low temperature structure appeared at 200 hPa, and consistent clockwise rotation flow was at vertical wind field. Meanwhile, water vapor was sufficient, and unstable energy existed at low layer. Structure characteristic of the convective strong precipitation appeared by advancing for 12h. As precipitation weakened, unstable energy was released, and ultra-low temperature disappeared. [Conclusion]The research provided some thoughts for the forecast of such weather process.
Using Radio Irregularity for Increasing Residential Energy Awareness
A. Miljković
2012-06-01
Full Text Available Radio irregularity phenomenon is often considered as a shortcoming of wireless networks. In this paper, the method of using radio irregularity as an efficient human presence detection sensor in smart homes is presented. The method is mainly based on monitoring variations of the received signal strength indicator (RSSI within the messages used for the communication between wireless smart power outlets. The radio signals used for the inter-outlets communication can be absorbed, diffracted or reflected by objects in their propagation paths. When a human enters the existing radio communication field, the variation of the signal strength at the receiver is even more expressed. Based on the detected changes and compared to the initial thresholds set during the initialization phase, the system detects human presence. The proposed solution increases user awareness and automates the power control in households, with the primary goal to contribute in residential energy savings. Compared to conventional sensor networks, this approach preserves the sensorial intelligence, simplicity and low installation costs, without the need for additional sensors integration.
Buckling analysis of partially corroded steel plates with irregular surfaces
Ahmad Rahbar-Ranji
2014-04-01
Corrosion is a long-term, inevitable process, lessens the thickness and load carrying capacity of structures. Old steel structures are more vulnerable to buckling, yielding and fracture due to corrosion. In lieu of a detailed analysis, average thickness assumption is employed for general type of corrosion. However, the estimation of load carrying capacity reduction of corroded structures typically need a much higher level of accuracy, since the actual corroded plates would have irregular surfaces. The objective of this article is to determine the effect of general corrosion on reduction of elastic buckling strength of both-sided partially corroded plates with irregular surfaces. Eigenvalue analysis using finite element method is employed for Euler stress calculation of corroded plates. The effects of different influential parameters are investigated and it is found that, aspect ratio of plate, location of corroded area, standard deviation of thickness diminution and concentration of corrosion have influence on reduction of elastic buckling strength. Reduction of elastic buckling strength is very sensitive to the amount of corrosion loss. The higher the amount of corrosion loss, the more reduction of elastic buckling strength.
Unsteady magnetohydrodynamic blood flow through irregular multi-stenosed arteries.
Mustapha, Norzieha; Amin, Norsarahaida; Chakravarty, Santabrata; Mandal, Prashanta Kumar
2009-10-01
Flow of an electrically conducting fluid characterizing blood through the arteries having irregular shaped multi-stenoses in the environment of a uniform transverse magnetic-field is analysed. The flow is considered to be axisymmetric with an outline of the irregular stenoses obtained from a three-dimensional casting of a mild stenosed artery, so that the physical problem becomes more realistic from the physiological point of view. The marker and cell (MAC) and successive-over-relaxation (SOR) methods are respectively used to solve the governing unsteady magnetohydrodynamic (MHD) equations and pressure-Poisson equation quantitatively and to observe the flow separation. The results obtained show that the flow separates mostly towards the downstream of the multi-stenoses. However, the flow separation region keeps on shrinking with the increasing intensity of the magnetic-field which completely disappears with sufficiently large value of the Hartmann number. The present observations certainly have some clinical implications relating to magnetotherapy which help reducing the complex flow separation zones causing flow disorder leading to the formation and progression of the arterial diseases.
Hydrophobic pulses predict transmembrane helix irregularities and channel transmembrane units
Claustres Mireille
2011-05-01
Full Text Available Abstract Background Few high-resolution structures of integral membranes proteins are available, as crystallization of such proteins needs yet to overcome too many technical limitations. Nevertheless, prediction of their transmembrane (TM structure by bioinformatics tools provides interesting insights on the topology of these proteins. Methods We describe here how to extract new information from the analysis of hydrophobicity variations or hydrophobic pulses (HPulses in the sequence of integral membrane proteins using the Hydrophobic Pulse Predictor, a new tool we developed for this purpose. To analyze the primary sequence of 70 integral membrane proteins we defined two levels of analysis: G1-HPulses for sliding windows of n = 2 to 6 and G2-HPulses for sliding windows of n = 12 to 16. Results The G2-HPulse analysis of 541 transmembrane helices allowed the definition of the new concept of transmembrane unit (TMU that groups together transmembrane helices and segments with potential adjacent structures. In addition, the G1-HPulse analysis identified helix irregularities that corresponded to kinks, partial helices or unannotated structural events. These irregularities could represent key dynamic elements that are alternatively activated depending on the channel status as illustrated by the crystal structures of the lactose permease in different conformations. Conclusions Our results open a new way in the understanding of transmembrane secondary structures: hydrophobicity through hydrophobic pulses strongly impacts on such embedded structures and is not confined to define the transmembrane status of amino acids.
3D Reconstruction of Irregular Buildings and Buddha Statues
Zhang, K.; Li, M.-j.
2014-04-01
Three-dimensional laser scanning could acquire object's surface data quickly and accurately. However, the post-processing of point cloud is not perfect and could be improved. Based on the study of 3D laser scanning technology, this paper describes the details of solutions to modelling irregular ancient buildings and Buddha statues in Jinshan Temple, which aiming at data acquisition, modelling and texture mapping, etc. In order to modelling irregular ancient buildings effectively, the structure of each building is extracted manually by point cloud and the textures are mapped by the software of 3ds Max. The methods clearly combine 3D laser scanning technology with traditional modelling methods, and greatly improves the efficiency and accuracy of the ancient buildings restored. On the other hand, the main idea of modelling statues is regarded as modelling objects in reverse engineering. The digital model of statues obtained is not just vivid, but also accurate in the field of surveying and mapping. On this basis, a 3D scene of Jinshan Temple is reconstructed, which proves the validity of the solutions.
An Irregular Wave Maker of Active Absorption with VOF Method
无
2008-01-01
A numerical irregular wave flume with active absorption of re-reflected waves is simulated by use of volume of fluid (VOF) method. An active absorbing wave-maker based on linear wave-theory is set on the left boundary of the wave flume. The progressive waves and the absorbing waves are generated simultaneously at the active wave generating-absorbing boundary. The absorbing waves are generated to eliminate the waves coming back to the generating boundary due to reflection from the outflow boundary and the structures. SIRW method proposed by Frigaard and Brorsen (1995) is used to separate the incident waves and reflected waves. The digital filters are designed based on the surface elevation signals of the two wave gauges. The corrected velocity of the wave-maker paddle is the output from the digital filter in real time. The numerical results of regular and irregular waves by the active absorbing-generating boundary are compared with the numerical results by the ordinary generating boundary to verify the performance of the active absorbing generator boundary. The differences between the initial incident waves and the estimated incident waves are analyzed.
Clotilde de la Caridad Mora Pérez
2009-04-01
Full Text Available Background: Human beings are conditioned to breathe through the nose and feed through the mouth, when this physiological mechanism is interrupted facial and general growth is also affected. Objective: To characterize Angle´s Class II malocclusions in oral breathers with nasorespiratory and orthopedic dysfunctions. Method: A correlational, observational and descriptive study was developed from December 2004 to November 2005 including clinical examination of 833 children out of which 60 were selected to take part in this study. Each case was analyzed in Orthodontia, Orthopedics and Otolaryngology consultations. The studied variables were: age, sex, nasorespiratory disorders, orthopedic dysfunctions, dental-maxillofacial irregularities. Results: The mot frequent dental-maxillofacial irregularities were: bilabial incompetence, transversal micrognathism, vestibular version, overjet and overbite. The most important nasorespiratory dysfunctions found in these children were adenoiditis, and tonsil hypertrophy. The most outstanding orthopedic dysfunction was ciphosis. Conclusion: It is conclusive to state that there is a high relationship between dentomaxillofacial anomalies and nasorespiratory and orthopedic dysfunctions.
Scatter dose summation for irregular fields: speed and accuracy study.
DeWyngaert, J K; Siddon, R L; Bjarngard, B E
1986-05-01
Using program IRREG as a standard, we have compared speed and accuracy of several algorithms that calculate the scatter dose in an irregular field. All the algorithms, in some manner, decompose the irregular field into component triangles and obtain the scatter dose as the sum of the contributions from those triangles. Two of the algorithms replace each such component triangle with a sector of a certain "effective radius": in one case the average radius of the triangle, in the other the radius of the sector having the same area as the component triangle. A third algorithm decomposes each triangle further into two right triangles and utilizes the precalculated "equivalent radius" of each, to find the scatter contribution. For points near the center of a square field, all the methods compare favorably in accuracy to program IRREG, with less than a 1% error in total dose and with approximately a factor of 3-5 savings in computation time. Even for extreme rectangular fields (2 cm X 30 cm), the methods using the average radius and the equivalent right triangles agree to within 2% in total dose and approximately a factor of 3-4 savings in computation time.
Handling Qualities Optimization for Rotorcraft Conceptual Design
Lawrence, Ben; Theodore, Colin R.; Berger, Tom
2016-01-01
Over the past decade, NASA, under a succession of rotary-wing programs has been moving towards coupling multiple discipline analyses in a rigorous consistent manner to evaluate rotorcraft conceptual designs. Handling qualities is one of the component analyses to be included in a future NASA Multidisciplinary Analysis and Optimization framework for conceptual design of VTOL aircraft. Similarly, the future vision for the capability of the Concept Design and Assessment Technology Area (CD&A-TA) of the U.S Army Aviation Development Directorate also includes a handling qualities component. SIMPLI-FLYD is a tool jointly developed by NASA and the U.S. Army to perform modeling and analysis for the assessment of flight dynamics and control aspects of the handling qualities of rotorcraft conceptual designs. An exploration of handling qualities analysis has been carried out using SIMPLI-FLYD in illustrative scenarios of a tiltrotor in forward flight and single-main rotor helicopter at hover. Using SIMPLI-FLYD and the conceptual design tool NDARC integrated into a single process, the effects of variations of design parameters such as tail or rotor size were evaluated in the form of margins to fixed- and rotary-wing handling qualities metrics as well as the vehicle empty weight. The handling qualities design margins are shown to vary across the flight envelope due to both changing flight dynamic and control characteristics and changing handling qualities specification requirements. The current SIMPLI-FLYD capability and future developments are discussed in the context of an overall rotorcraft conceptual design process.
Rotorcraft handling-qualities design criteria development
Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.
1988-01-01
Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.
Handling Qualities Implications for Crewed Spacecraft Operations
Bailey, Randall E.; Jackson, E. Bruce; Arthur, J. J.
2012-01-01
Abstract Handling qualities embody those qualities or characteristics of an aircraft that govern the ease and precision with which a pilot is able to perform the tasks required in support of an aircraft role. These same qualities are as critical, if not more so, in the operation of spacecraft. A research, development, test, and evaluation process was put into effect to identify, understand, and interpret the engineering and human factors principles which govern the pilot-vehicle dynamic system as they pertain to space exploration missions and tasks. Toward this objective, piloted simulations were conducted at the NASA Langley Research Center and Ames Research Center for earth-orbit proximity operations and docking and lunar landing. These works provide broad guidelines for the design of spacecraft to exhibit excellent handling characteristics. In particular, this work demonstrates how handling qualities include much more than just stability and control characteristics of a spacecraft or aircraft. Handling qualities are affected by all aspects of the pilot-vehicle dynamic system, including the motion, visual and aural cues of the vehicle response as the pilot performs the required operation or task. A holistic approach to spacecraft design, including the use of manual control, automatic control, and pilot intervention/supervision is described. The handling qualities implications of design decisions are demonstrated using these pilot-in-the-loop evaluations of docking operations and lunar landings.
Effective Teaching Practices in Handling Non Readers
Jacklyn S. Dacalos
2016-08-01
Full Text Available The study determined the effective teaching practices in handling nonreaders. This seeks to answer the following objectives: describe the adjustments, effective strategies, and scaffolds utilized by teachers in handling nonreaders; differentiate the teachers’ reading adjustments, strategies and scaffolds in teaching nonreaders; analyze the teaching reading efficiency of nonreaders using effective teaching reading strategies; and find significant correlation of nonreaders’ grades and reading teachers’ reading adjustments, strategies and scaffolds. This study utilized mixed methods of research. Case studies of five public schools teachers were selected as primary subjects, who were interviewed in handling nonreaders in the areas of adjustments, strategies, and reading scaffolds. Actual teaching observation was conducted according to the five subjects’ most convenient time. In ascertaining the nonreaders’ academic performance, the students’ grades in English subject was analyzed using T-Test within subject design. Handling nonreaders in order to read and understand better in the lesson is an arduous act, yet; once done with effectiveness and passion, it yielded a great amount of learning success. Effective teaching practices in handling nonreaders comprised the use of teachers’ adjustments, strategies, and scaffolds to establish reading mastery, exposing them to letter sounds, short stories, and the use of follow-up. WH questions enhanced their reading performance significantly. Variations of reading teachers’ nature as: an enabler, a facilitator, a humanist, a behaviorist, and an expert, as regards to their teaching practices, were proven significant to students’ reading effectiveness.
Logistic Incentive Structures Reflected in Irregular Logistic Procedures
1980-01-31
Press. Brown, James Douglas. (1973) The Human Nature of Organizations. New York: APRACON. Cartwright , Dorwin , and Alvin Zander, eds. (1968) Group...John Wiley and Sons, Inc. BOWERS, David G. (1976) Systems of Organization. Ann Arbor, Mich.: The University of Michigan Press. CARTWRIGHT , Dorwin , and...exclusive and proximity ofI 37 Janis in Cartwright and Zander (1968). A-22 ownership. It is often zealously guarded, accurately accounted for, and handled
Randomly removing g handles at once
Borradaile, Glencora; Sidiropoulos, Anastasios
2010-01-01
Indyk and Sidiropoulos (2007) proved that any orientable graph of genus $g$ can be probabilistically embedded into a graph of genus $g-1$ with constant distortion. Viewing a graph of genus $g$ as embedded on the surface of a sphere with $g$ handles attached, Indyk and Sidiropoulos' method gives an embedding into a distribution over planar graphs with distortion $2^{O(g)}$, by iteratively removing the handles. By removing all $g$ handles at once, we present a probabilistic embedding with distortion $O(g^2)$ for both orientable and non-orientable graphs. Our result is obtained by showing that the nimum-cut graph of Erickson and Har Peled (2004) has low dilation, and then randomly cutting this graph out of the surface using the Peeling Lemma of Lee and Sidiropoulos (2009).
DOE handbook: Tritium handling and safe storage
NONE
1999-03-01
The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.
Mitri, F G
2016-12-01
The goal of this work is to demonstrate the emergence of a spin torque singularity (i.e. zero spin torque) and a spin rotation reversal of a small Rayleigh lipid/fat viscous fluid sphere located arbitrarily in space in the field of an acoustical Bessel vortex beam. This counter-intuitive property of negative spin torque generation suggests a direction of spin rotation in opposite handedness of the angular momentum carried by the incident beam. Such effects may open new capabilities in methods of quantitative characterization to determine physical properties such as viscosity, viscoelasticity, compressibility, stiffness, etc., and other techniques for the rotation and positioning using acoustical tractor beams and tweezers, invisibility cloaks, and acoustically-engineered composite metamaterials to name a few examples. Based on the descriptions for the velocity potential of the incident beam and the scattering coefficients of the sphere in the long-wavelength approximation limit, simplified expressions for the spin and orbital radiation torque components are derived. For beams with (positive or negative) unit topological charge (m=±1), the axial spin torque component for a Rayleigh absorptive sphere is maximal at the center of the beam, while it vanishes for |m|>1 therein. Moreover, the longitudinal orbital torque component, causing the sphere to rotate around the center of the beam is evaluated based on the mathematical decomposition using the gradient, scattering and absorption transverse radiation force vector components. It is shown that there is no contribution of the gradient transverse force to the orbital torque, which is only caused by the scattering and absorption transverse force components. Though the incident acoustical vortex beam carrying angular momentum causes the sphere to rotate in the same orbital direction of the beam handedness, it induces a spin torque singularity (i.e. zero spin torque) and subsequent sign reversal. This phenomenon of
Handling of fuel chips - a health problem
Stroemquist, L.H.; Blomqvist, G.; Karlsson, E.; Vincent, A.; Lundgren, R.; Eliasson, L.
1980-01-01
An investigation has been made about health problems and occurrence of mold in connection with handling of fuel chips. The investigation was composed of three different parts. First, an inquiry was made to chip stokers about handling, storage etc. of chips as well as possible medical trouble. The answers indicated that symptoms on allergic alveolitis are common among chip stokers, 13% of the answers. Second, a determination of the proportion of living airborne colony-forming mold fungi was made at some chip using units. Third, a pilot study was made to examine the possibilities to improve storability of fuel chips using high-temperature drying.
Reconstruction of Multidimensional Signals from Irregular Noisy Samples
Nordio, A; Viterbo, E
2008-01-01
We focus on a multidimensional field with uncorrelated spectrum, and study the quality of the reconstructed signal when the field samples are irregularly spaced and affected by independent and identically distributed noise. More specifically, we apply linear reconstruction techniques and take the mean square error (MSE) of the field estimate as a metric to evaluate the signal reconstruction quality. We find that the MSE analysis could be carried out by using the closed-form expression of the eigenvalue distribution of the matrix representing the sampling system. Unfortunately, such distribution is still unknown. Thus, we first derive a closed-form expression of the distribution moments, and we find that the eigenvalue distribution tends to the Marcenko-Pastur distribution as the field dimension goes to infinity. Finally, by using our approach, we derive a tight approximation to the MSE of the reconstructed field.
Evaluation of Surface Slope Irregularity in Linear Parabolic Solar Collectors
F. Francini
2012-01-01
Full Text Available The paper describes a methodology, very simple in its application, for measuring surface irregularities of linear parabolic collectors. This technique was principally developed to be applied in cases where it is difficult to use cumbersome instruments and to facilitate logistic management. The instruments to be employed are a digital camera and a grating. If the reflector surface is defective, the image of the grating, reflected on the solar collector, appears distorted. Analyzing the reflected image, we can obtain the local slope of the defective surface. These profilometric tests are useful to identify and monitor the mirror portions under mechanical stress and to estimate the losses caused by the light rays deflected outside the absorber.
The Panchromatic STARBurst IRregular Dwarf Survey (STARBIRDS) Data
McQuinn, Kristen B W; Skillman, Evan D
2016-01-01
Understanding star formation in resolved low mass systems requires the integration of information obtained from observations at different wavelengths. We have combined new and archival multi-wavelength observations on a set of 20 nearby starburst and post-starburst dwarf galaxies to create a data archive of calibrated, homogeneously reduced images. Named the panchromatic "STARBurst IRregular Dwarf Survey" (STARBIRDS) archive, the data are publicly accessible through the Mikulski Archive for Space Telescopes (MAST). This first release of the archive includes images from the Galaxy Evolution Explorer Telescope (GALEX), the Hubble Space Telescope (HST), and the Spitzer Space Telescope (Spitzer) MIPS instrument. The datasets include flux calibrated, background subtracted images, that are registered to the same world coordinate system. Additionally, a set of images are available which are all cropped to match the HST field of view. The GALEX and Spitzer images are available with foreground and background contamina...
Weighted statistical parameters for irregularly sampled time series
Rimoldini, Lorenzo
2014-01-01
Unevenly spaced time series are common in astronomy because of the day-night cycle, weather conditions, dependence on the source position in the sky, allocated telescope time, corrupt measurements, for example, or be inherent to the scanning law of satellites like Hipparcos and the forthcoming Gaia. This paper aims at improving the accuracy of common statistical parameters for the characterization of irregularly sampled signals. The uneven representation of time series, often including clumps of measurements and gaps with no data, can severely disrupt the values of estimators. A weighting scheme adapting to the sampling density and noise level of the signal is formulated. Its application to time series from the Hipparcos periodic catalogue led to significant improvements in the overall accuracy and precision of the estimators with respect to the unweighted counterparts and those weighted by inverse-squared uncertainties. Automated classification procedures employing statistical parameters weighted by the sugg...
A deeper look at the color of Saturnian irregular satellites
Grav, T
2006-01-01
We have performed broadband color photometry of the twelve brightest irregular satellites of Saturn with the goal of understanding their surface composition, as well as their physical relationship. We find that the satellites have a wide variety of different surface colors, from the negative spectral slopes of the two retrograde satellites S IX Phoebe (S'=-2.5+/-0.4 %/100nm) and S XXV Mundilfari (S'=-5.0+/-1.9 %/100nm) to the fairly red slope of S XXII Ijiraq (S'=19.5+/-0.9 %/100nm). We further find that there exist a correlation between dynamical families and spectral slope, with the prograde clusters, the Gallic and Inuit, showing tight clustering in colors among most of their members. The retrograde objects are dynamically and physically more dispersed, but some internal structure is apparent.
Irregular Computations in Fortran – Expression and Implementation Strategies
Jan F. Prins
1999-01-01
Full Text Available Modern dialects of Fortran enjoy wide use and good support on high‐performance computers as performance‐oriented programming languages. By providing the ability to express nested data parallelism, modern Fortran dialects enable irregular computations to be incorporated into existing applications with minimal rewriting and without sacrificing performance within the regular portions of the application. Since performance of nested data‐parallel computation is unpredictable and often poor using current compilers, we investigate threading and flattening, two source‐to‐source transformation techniques that can improve performance and performance stability. For experimental validation of these techniques, we explore nested data‐parallel implementations of the sparse matrix‐vector product and the Barnes–Hut n‐body algorithm by hand‐coding thread‐based (using OpenMP directives and flattening‐based versions of these algorithms and evaluating their performance on an SGI Origin 2000 and an NEC SX‐4, two shared‐memory machines.
Towards intrinsic magnetism of graphene sheets with irregular zigzag edges.
Chen, Lianlian; Guo, Liwei; Li, Zhilin; Zhang, Han; Lin, Jingjing; Huang, Jiao; Jin, Shifeng; Chen, Xiaolong
2013-01-01
The magnetism of graphene has remained divergent and controversial due to absence of reliable experimental results. Here we show the intrinsic magnetism of graphene edge states revealed based on unidirectional aligned graphene sheets derived from completely carbonized SiC crystals. It is found that ferromagnetism, antiferromagnetism and diamagnetism along with a probable superconductivity exist in the graphene with irregular zigzag edges. A phase diagram is constructed to show the evolution of the magnetism. The ferromagnetic ordering curie-temperature of the fundamental magnetic order unit (FMOU) is 820 ± 80 K. The antiferromagnetic ordering Neel temperature of the FMOUs belonging to different sublattices is about 54 ± 2 K. The diamagnetism is similar to that of graphite and can be well described by the Kotosonov's equation. Our experimental results provide new evidences to clarify the controversial experimental phenomena observed in graphene and contribute to a deeper insight into the nature of magnetism in graphene based system.
Irregular Coarse-Grain Data Parallelism under LPARX
Scott R. Kohn
1996-01-01
Full Text Available LPARX is a software development tool for implementing dynamic, irregular scientific applications, such as multilevel finite difference and particle methods, on high-performance multiple instruction multiple data (MIMD parallel architectures. It supports coarse-grain data parallelism and gives the application complete control over specifying arbitrary block decompositions. LPARX provides structural abstraction, representing data decompositions as first-class objects that can be manipulated and modified at runtime. LPARX, implemented as a C++ class library, is currently running on diverse MIMD platforms, including the Intel Paragon, Cray C-90, IBM SP2, and networks of workstations running under PVM. Software may be developed and debugged on a singe-processor workstation.
Optimized puncturing distributions for irregular non-binary LDPC codes
Gorgoglione, Matteo; Declercq, David
2010-01-01
In this paper we design non-uniform bit-wise puncturing distributions for irregular non-binary LDPC (NB-LDPC) codes. The puncturing distributions are optimized by minimizing the decoding threshold of the punctured LDPC code, the threshold being computed with a Monte-Carlo implementation of Density Evolution. First, we show that Density Evolution computed with Monte-Carlo simulations provides accurate (very close) and precise (small variance) estimates of NB-LDPC code ensemble thresholds. Based on the proposed method, we analyze several puncturing distributions for regular and semi-regular codes, obtained either by clustering punctured bits, or spreading them over the symbol-nodes of the Tanner graph. Finally, optimized puncturing distributions for non-binary LDPC codes with small maximum degree are presented, which exhibit a gap between 0.2 and 0.5 dB to the channel capacity, for punctured rates varying from 0.5 to 0.9.
Computer-Generated Experimental Designs for Irregular-Shaped Regions
Nguyen, Nam K.; Piepel, Gregory F.
2005-09-01
This paper focuses on the construction of computer-generated designs on irregularly-shaped, constrained regions. Overviews of the Fedorov exchange algorithm (FEA) and other exchange algorithms for the construction of D-optimal designs are given. A faster implementation of the FEA is presented, which is referred to as fast-FEA (denoted FFEA). The FFEA was applied to construct D-optimal designs for several published examples with constrained experimental regions. Designs resulting from the FFEA are more D-efficient than published designs, and provide benchmarks for future comparisons of design construction algorithms. The construction of G-optimal designs for constrained regions is also discussed and illustrated with a published example.
The Orbits of Jupiter’s Irregular Satellites
Brozović, Marina; Jacobson, Robert A.
2017-04-01
We report on the improved ephemerides for the irregular Jovian satellites. We used a combination of numerically integrated equations of motion and a weighted least-squares algorithm to fit the astrometric measurements. The orbital fits for 59 satellites are summarized in terms of state vectors, post-fit residuals, and mean orbital elements. The current data set appears to be sensitive to the mass of Himalia, which is constrained to the range of GM = 0.13–0.28 km3 s‑2. Here, GM is the product of the Newtonian constant of gravitation, G and the body's mass, M. Our analysis of the orbital uncertainties indicates that 11 out of 59 satellites are lost owing to short data arcs. The lost satellites hold provisional International Astronomical Union (IAU) designations and will likely need to be rediscovered.
Irregularities of ionospheric VTEC during lightning activity over Antarctic Peninsula
Suparta, W.; Nor, W. N. A. Wan Mohd
2017-05-01
This paper investigates the irregularities of vertical total electron content (VTEC) during lightning activity and geomagnetic quiet days over Antarctic Peninsula in year 2014. During the lightning event, the ionosphere may be disturbed which may cause disruption in the radio signal. Thus, it is important to understand the influence of lightning on VTEC in the study of upper-lower interaction. The lightning data is obtained from World Wide Lightning Location Network (WWLLN) and the VTEC data has analyzed from Global Positioning System (GPS) for O’Higgins (OHI3), Palmer (PALV), and Rothera (ROTH). The results demonstrate the VTEC variation of ∼0.2 TECU during low lightning activity which could be caused by energy dissipation through lightning discharges from troposphere into the thermosphere.
Collisional Cascade Caclulations for Irregular Satellite Swarms in Fomalhaut b
Kenyon, Scott J
2015-01-01
We describe an extensive suite of numerical calculations for the collisional evolution of irregular satellite swarms around 1--300 M-earth planets orbiting at 120 AU in the Fomalhaut system. For 10--100 M-earth planets, swarms with initial masses of roughly 1% of the planet mass have cross-sectional areas comparable to the observed cross-sectional area of Fomalhaut b. Among 30--300 M-earth planets, our calculations yield optically thick swarms of satellites for ages of 1-10 Myr. Observations with HST and ground-based AO instruments can constrain the frequency of these systems around stars in the beta Pic moving group and possibly other nearby associations of young stars.
Global scale ionospheric irregularities associated with thunderstorm activity
Pulinets, S A
2002-01-01
The potential difference near 280 kV exists between ground and ionosphere. This potential difference is generated by thunderstorm discharges all over the world, and return current closes the circuit in the areas of fair weather (so-called fair weather current). The model calculations and experimental measurements clearly demonstrate non-uniform latitude-longitude distribution of electric field within the atmosphere. The recent calculations show that the strong large scale vertical atmospheric electric field can penetrate into the ionosphere and create large scale irregularities of the electron concentration. To check this the global distributions of thunderstorm activity obtained with the satellite monitoring for different seasons were compared with the global distributions of ionosphere critical frequency (which is equivalent to peak electron concentration) obtained with the help of satellite topside sounding. The similarity of the obtained global distributions clearly demonstrates the effects of thunderstor...
Robust Fusion of Irregularly Sampled Data Using Adaptive Normalized Convolution
Schutte Klamer
2006-01-01
Full Text Available We present a novel algorithm for image fusion from irregularly sampled data. The method is based on the framework of normalized convolution (NC, in which the local signal is approximated through a projection onto a subspace. The use of polynomial basis functions in this paper makes NC equivalent to a local Taylor series expansion. Unlike the traditional framework, however, the window function of adaptive NC is adapted to local linear structures. This leads to more samples of the same modality being gathered for the analysis, which in turn improves signal-to-noise ratio and reduces diffusion across discontinuities. A robust signal certainty is also adapted to the sample intensities to minimize the influence of outliers. Excellent fusion capability of adaptive NC is demonstrated through an application of super-resolution image reconstruction.
Combined radar observations of equatorial electrojet irregularities at Jicamarca
D. L. Hysell
2007-03-01
Full Text Available Daytime equatorial electrojet plasma irregularities were investigated using five distinct radar diagnostics at Jicamarca including range-time-intensity (RTI mapping, Faraday rotation, radar imaging, oblique scattering, and multiple-frequency scattering using the new AMISR prototype UHF radar. Data suggest the existence of plasma density striations separated by 3–5 km and propagating slowly downward. The striations may be caused by neutral atmospheric turbulence, and a possible scenario for their formation is discussed. The Doppler shifts of type 1 echoes observed at VHF and UHF frequencies are compared and interpreted in light of a model of Farley Buneman waves based on kinetic ions and fluid electrons with thermal effects included. Finally, the up-down and east-west asymmetries evident in the radar observations are described and quantified.
Tracking breather dynamics in irregular sea state conditions
Chabchoub, A
2016-01-01
Breather solutions of the nonlinear Schr\\"odinger equation (NLSE) are known to be considered as backbone models for extreme events in the ocean as well as in Kerr media. These exact determinisitic rogue wave (RW) prototypes on a regular background describe a wide-range of modulation instability configurations. Alternatively, oceanic or electromagnetic wave fields can be of chaotic nature and it is known that RWs may develop in such conditions as well. We report an experimental study confirming that extreme localizations in an irregular oceanic JONSWAP wave field can be tracked back to originate from exact NLSE breather solutions, such as the Peregrine breather. Numerical NLSE as well as modified NLSE simulations are both in good agreement with laboratory experiments and highlight the significance of universal weakly nonlinear evolution equations in the emergence as well as prediction of extreme events in nonlinear dispersive media.
Manufacturing of Cast Metal Foams with Irregular Cell Structure
Kroupová I.
2015-06-01
Full Text Available Metallic foams are materials of which the research is still on-going, with the broad applicability in many different areas (e.g. automotive industry, building industry, medicine, etc.. These metallic materials have specific properties, such as large rigidity at low density, high thermal conductivity, capability to absorb energy, etc. The work is focused on the preparation of these materials using conventional casting technology (infiltration method, which ensures rapid and economically feasible method for production of shaped components. In the experimental part we studied conditions of casting of metallic foams with open pores and irregular cell structure made of ferrous and nonferrous alloys by use of various types of filler material (precursors.
Constructing a logical, regular axis topology from an irregular topology
Faraj, Daniel A.
2014-07-01
Constructing a logical regular topology from an irregular topology including, for each axial dimension and recursively, for each compute node in a subcommunicator until returning to a first node: adding to a logical line of the axial dimension a neighbor specified in a nearest neighbor list; calling the added compute node; determining, by the called node, whether any neighbor in the node's nearest neighbor list is available to add to the logical line; if a neighbor in the called compute node's nearest neighbor list is available to add to the logical line, adding, by the called compute node to the logical line, any neighbor in the called compute node's nearest neighbor list for the axial dimension not already added to the logical line; and, if no neighbor in the called compute node's nearest neighbor list is available to add to the logical line, returning to the calling compute node.
First Stellar Abundances in the Dwarf Irregular Galaxy IC 1613
Tautvaišienė, Gražina; Geisler, Doug; Wallerstein, George; Borissova, Jura; Bizyaev, Dmitry; Pagel, Bernard E. J.; Charbonnel, Corinne; Smith, Verne
2007-12-01
Chemical abundances in three M supergiants in the Local Group dwarf irregular galaxy IC 1613 have been determined using high-resolution spectra obtained with the UVES spectrograph on the ESO 8.2 m Kueyen telescope. A detailed synthetic-spectrum analysis has been used to determine the atmospheric parameters and abundances of O, Na, Mg, Al, Si, Ca, Sc, Ti, Cr, Fe, Co, Ni, La, and Eu. We find the overall metallicity of the stars to be [Fe/H] = -0.67 ± 0.09 and the age 9-13 Myr, which is in excellent agreement with the present-day values in the age-metallicity relationship model of IC 1613 by Skillman et al. We have found that the three supergiants investigated have a mean [α/Fe] equal to about -0.1, which is lower than seen in Galactic stars at the same metallicity and is in agreement with the results obtained in other dwarf irregular galaxies. The oxygen abundances are in agreement with the upper values of the nebular oxygen determinations in IC 1613. The abundance ratios of s- and r-process elements to iron are enhanced relative to solar by about 0.3 dex. The abundance pattern of the elements studied is similar to that of the Small Magellanic Cloud, except for Co and Ni, which are underabundant in the SMC. The observed elemental abundances are generally in very good agreement with the recent chemical evolution model of Yuk and Lee. Based on observations collected with the Very Large Telescope and the 2.2 m Telescope of the European Southern Observatory within the Observing Programs 70.B-0361(A) and 072.D-0113(D).
How Iapetus is Painted by Saturn's Irregular Satellites
Tamayo, Dan; Burns, J. A.; Hamilton, D. P.; Hedman, M. M.
2010-10-01
The leading hemisphere of Iapetus, Saturn's outermost regular satellite, is ten times darker than its trailing side. To explain this unique albedo distribution, Soter (1974) proposed that collisionally generated dust from the dark outer irregular satellite Phoebe has evolved inward due to radiation forces and coated Iapetus’ leading side. The recent discovery (Verbiscer et al. 2009) of the colossal Phoebe ring between the orbits of Iapetus and Phoebe indicates that Soter's mechanism is active at some level. . To calibrate the effectiveness of this source, we follow the histories of Phoebe-ring dust under the relevant perturbations and thereby evaluate the particles’ probability of striking Iapetus, as well as the expected spatial distribution on the Iapetan surface. We find that, of the long-lived particles (those larger than 4 µm), those larger than 10 µm are virtually certain to strike Iapetus. Their calculated distribution across the surface matches well the measured albedo pattern in longitude. To explain the observed bright polar caps, our computed polar-dust-deposition rates must be overwhelmed by sublimation products from equatorial regions as proposed in the thermal runaway model of Spencer & Denk (2010); we thus constrain the latter model. We also track the dust originating from all the other known irregular moons, finding that a substantial fraction of the material from retrograde moons would eventually coat Iapetus--perhaps explaining why the spectrum of Iapetus’ dark material differs somewhat from Phoebe's (Buratti et al. 2005). We find that dust from lower-eccentricity moons with inclinations nearer 180° is more likely to strike Iapetus. . Finally, of those dust particles that do not strike Iapetus, we find that most land on Titan, with a smaller fraction hitting Hyperion. As has been previously conjectured (Burns et al. 1996), such exogenous dust, coupled with Hyperion's chaotic rotation could explain Hyperion's roughly uniform, moderate
How to analyse irregularly sampled geophysical time series?
Eroglu, Deniz; Ozken, Ibrahim; Stemler, Thomas; Marwan, Norbert; Wyrwoll, Karl-Heinz; Kurths, Juergen
2015-04-01
One of the challenges of time series analysis is to detect dynamical changes in the dynamics of the underlying system.There are numerous methods that can be used to detect such regime changes in regular sampled times series. Here we present a new approach, that can be applied, when the time series is irregular sampled. Such data sets occur frequently in real world applications as in paleo climate proxy records. The basic idea follows Victor and Purpura [1] and considers segments of the time series. For each segment we compute the cost of transforming the segment into the following one. If the time series is from one dynamical regime the cost of transformation should be similar for each segment of the data. Dramatic changes in the cost time series indicate a change in the underlying dynamics. Any kind of analysis can be applicable to the cost time series since it is a regularly sampled time series. While recurrence plots are not the best choice for irregular sampled data with some measurement noise component, we show that a recurrence plot analysis based on the cost time series can successfully identify the changes in the dynamics of the system. We tested this method using synthetically created time series and will use these results to highlight the performance of our method. Furthermore we present our analysis of a suite of calcite and aragonite stalagmites located in the eastern Kimberley region of tropical Western Australia. This oxygen isotopic data is a proxy for the monsoon activity over the last 8,000 years. In this time series our method picks up several so far undetected changes from wet to dry in the monsoon system and therefore enables us to get a better understanding of the monsoon dynamics in the North-East of Australia over the last couple of thousand years. [1] J. D. Victor and K. P. Purpura, Network: Computation in Neural Systems 8, 127 (1997)
ESA' s novel gravitational modeling of irregular planetary bodies
Ortega, Guillermo
A detailed understanding and modeling of the gravitational modeling is required for realistic investigation of the dynamics of orbits close to irregularly shaped bodies. Gravity field modelling up to a certain maximum spherical harmonic degree N involves N2 unkown spherical harmonic coefficients or complex harmonics. The corresponding number of matrix entries reaches till N4 . For missions like CHAMP, GRACE or GOCE, the maximum degree of resolution is 75, 150 and 300 respectively. Therefore, the number of unknowns for a satellite like GOCE will be around 100.000. Since these missions usually fly for a period of time of several years, the number of observations is huge. Hence, gravity field recovery from these missions is a high demanding task. The classical approaches like spherical expansion of the potential lead generally to a high number of coefficients, which reduce the software computational efficiency of the orbit propagation and which have mostly a limited physical meaning. One of the main targets of the activity is the modelling of asteroids, small moons, and cometary bodies. All celestial bodies are irregular by definition. However, the scope of the activity is broad enough as to be able to use the models and the software in quasy-regular bodies as well. Therefore the models and tools could be used for bodies such as the Moon, Mars, Venus, Deimos, Europa, Eros, Mathilda, and Churyumov-Gerasimenko, etc., being these applications relevant for scientific (Rosetta, Bepi Colombo), exploration (Exo-Mars), NEO mitigation (Don Quijote) and Earth observation (GOCE) missions of ESA.
Efficient Clustering for Irregular Geometries Based on Identification of Concavities
Velázquez-Villegas Fernando
2014-04-01
Full Text Available Two dimensional clustering problem has much relevance in applications related to the efficient use of raw material, such as cutting stock, packing, etc. This is a very complex problem in which multiple bodies are accommodated efficiently in a way that they occupy as little space as possible. The complexity of the problem increases with the complexity of the bodies. Clearly the number of possible arrangements between bodies is huge. No Fit Polygon (NFP allows to determine the entire relative positions between two patterns (regular or irregular in contact, non-overlapping, therefore the best position can be selected. However, NFP generation requires a lot of calculations; besides, selecting the best cluster isn’t a simple task because, between two irregular patterns in contact, hollows (unusable areas and external concavities (usable areas can be produced. This work presents a quick and simple method to reduce calculations associated with NFP generation and to minimize unusable areas in a cluster. This method consists of generating partial NFP, just on concave regions of the patterns, and selecting the best cluster using a total weighted efficiency, i.e. a weighted value of enclosure efficiency (ratio of occupied area on convex hull area and hollow efficiency (ratio of occupied area on cluster area. The proposed method produces similar results as those obtained by other methods; however the shape of the clusters obtained allows to accommodate more parts in similar spaces, which is a desirable result when it comes to optimizing the use of material. We present two examples to show the performance of the proposal.
Time-frequency processing of track irregularities in high-speed train
Ning, Jing; Lin, Jianhui; Zhang, Bing
2016-01-01
Track irregularities are the main source of vehicle vibration. With the increase in the speed, the track irregularities have become a more significant issue of concerned. The axle box acceleration signals can be obtained for analyzing the track irregularities, but the signals are usually non-stationary and signal processing results are not normally satisfied with the ordinary way. Thus, time-frequency distribution analysis is proposed to use in this study. To minimize the cross-terms, a new method based on Empirical Mode Decomposition (EMD) and Cohen's class distribution has been developed and advanced. This approach has been tested with three typical simulation signals and then applied to analyze the track irregularities. The result is consistent with the result from track inspection cars. This indicates this new algorithm is suitable for analyzing the track irregularities. It can be applied in rail irregularity measurement to compensate some shortages of the track inspection cars.
Remote-handled transuranic system assessment appendices. Volume 2
NONE
1995-11-01
Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.
Remote-handled transuranic system assessment appendices. Volume 2
NONE
1995-11-01
Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.
30 CFR 77.1303 - Explosives, handling and use.
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle... treated and handled with the same safety precautions as blasting caps and electric detonators. (o) Capped...
Human Rights of Irregular Immigrants: A Challenge for the Universality of Human Rights
Luljeta Ikonomi
2013-01-01
Irregular immigration is a phenomenon with a substantial impact for the majority of the countries. The paper analyses whether there is an adequate human rights framework for protection of irregular immigrants or whether the irregular status exempts the migrants from the protection of international human rights law. If this is the case, then the human rights universality has failed. The paper takes into consideration the developments in the International and EU Law, as well as in the jurisprud...
Gasymov, E. A.; Guseinova, A. O.; Gasanova, U. N.
2016-07-01
One of the methods for solving mixed problems is the classical separation of variables (the Fourier method). If the boundary conditions of the mixed problem are irregular, this method, generally speaking, is not applicable. In the present paper, a generalized separation of variables and a way of application of this method to solving some mixed problems with irregular boundary conditions are proposed. Analytical representation of the solution to this irregular mixed problem is obtained.
Efficient compensation handling via subjective updates
J. Dedeić (Jovana); J. Pantović (Jovanka); J.A. Pérez Parra (Jorge)
2017-01-01
textabstractProgramming abstractions for compensation handling and dynamic update are crucial in specifying reliable interacting systems, such as Collective Adaptive Systems (CAS). Compensations and updates both specify how a system reacts in response to exceptional events. Prior work showed that
CLINICAL WASTE HANDLING AND OBSTACLES IN MALAYSIA
Shaidatul Shida Razali
2010-12-01
Full Text Available As in many other developing countries, the generation of clinical waste in Malaysia has increased significantly over the last few decades. Even though the serious impact of the clinical waste on human beings and the environment is significant, only minor attention is directed to its proper handling and legal aspects. This study seeks to examine the management of clinical waste in Selangor’s government hospitals as well as problems that arise from the current practice of clinical waste management. A depth interview with the responsible concession who handles the clinical waste management in those hospitals also has been taken. In general, it was found that the consortium’s administration was reasonably aware of the importance of clinical waste management. However, significant voids were presented that need to be addressed in future including efficient segregation, better handling and transfer means, as well as the need for training and awareness programs for the personnel. Other obstacles faced by consortiums were to handle the clinical waste including the operational costs. Waste minimizing and recycling, as well as the alternative treatment methods for incineration are regarded to be major challenges in the future.
Confluence Modulo Equivalence in Constraint Handling Rules
Christiansen, Henning; Kirkeby, Maja Hanne
2014-01-01
Previous results on confluence for Constraint Handling Rules, CHR, are generalized to take into account user-defined state equivalence relations. This allows a much larger class of programs to enjoy the ad- vantages of confluence, which include various optimization techniques and simplified corre...
Materials handling centre: making business more efficient
B. Bollen (Brian)
2012-01-01
textabstractThe aim of the Materials Handling Forum at RSM is to narrow the gap between research and practice by promoting and disseminating academic knowledge, sharing innovative ideas, generating research questions, and co-developing new research themes with industry partners.
Waiting on More than 64 Handles
2015-10-01
parameter stuct is comprised of an array of handles with a maximum size of MAX_WAIT_OBJECTS and an integer holding the total quantity. Once all the...GIDEP Operations Center P.O. Box 8000 Corona , CA 91718-8000 gidep@gidep.org UNCLASSIFIED Approved for public release; distribution is unlimited. 4 Patricia Alameda Patricia Alameda Andrew Pskowski
Biodiesel Handling and Use Guide (Fifth Edition)
Alleman, Teresa L.; McCormick, Robert L.; Christensen, Earl D.; Fioroni, Gina; Moriarty, Kristi; Yanowitz, Janet
2016-11-08
This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.
Australia: round module handling and cotton classing
Round modules of seed cotton produced via on-board module building harvesters are the reality of the cotton industry, worldwide. Although round modules have been available to the industry for almost a decade, there is still no consensus on the best method to handle the modules, particularly when th...
Laboratory rearing and handling of cerambycids
Melody A. Keena
2017-01-01
Lack of suitable rearing and handling techniques has hampered research on the biology and control of many species of cerambycids that feed on host species of economic importance. Furthermore, because cerambycids spend most or all of their pre-adult life cycle inside the host plant, the biology of many is not well-known and would be dif
Intertextuality for Handling Complex Environmental Issues
Byhring, Anne Kristine; Knain, Erik
2016-01-01
Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify…
Railcar handling systems - designs for individual solutions
NONE
1995-04-01
The article examines the latest state of the art developments in railcar handling technology, with profiles of leading equipment suppliers in this field and recent projects completed worldwide. Equipment covered includes: railcar discharge systems; rotary dumpers; side discharge dumpers; and railcar loading systems. 2 figs., 7 photos.
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 915.10 Section 915.10 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... prepared for market. In the event a grower sells his avocados to a handler who is not so registered...
340 Waste handling facility interim safety basis
Stordeur, R.T.
1996-10-04
This document presents an interim safety basis for the 340 Waste Handling Facility classifying the 340 Facility as a Hazard Category 3 facility. The hazard analysis quantifies the operating safety envelop for this facility and demonstrates that the facility can be operated without a significant threat to onsite or offsite people.
340 waste handling facility interim safety basis
VAIL, T.S.
1999-04-01
This document presents an interim safety basis for the 340 Waste Handling Facility classifying the 340 Facility as a Hazard Category 3 facility. The hazard analysis quantifies the operating safety envelop for this facility and demonstrates that the facility can be operated without a significant threat to onsite or offsite people.
Intertextuality for Handling Complex Environmental Issues
Byhring, Anne Kristine; Knain, Erik
2016-01-01
Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify…
Goods handling: tugs, trailers and tractors.
Grayson, H
1980-09-26
Ease of handling ought to be a priority in any supply and disposal system. Hazel Grayson, senior research officer at the Medical Architecture Research Unit, Polytechnic of North London, suggests that even where driver-operated electric tow tractors cannot be used, other types of electric pulling device should be considered.
'Safe handling of nanotechnology' ten years on
Maynard, Andrew D.; Aitken, Robert J.
2016-12-01
In 2006, a group of scientists proposed five grand challenges to support the safe handling of nanotechnology. Ten years on, Andrew Maynard and Robert Aitken -- two of the original authors -- look at where we have come, and where we still need to go.
Caution required for handling genome editing technology.
Araki, Motoko; Nojima, Kumie; Ishii, Tetsuya
2014-05-01
Genome-editing technology, although a robust tool for genetic engineering, is creating indistinct regulatory boundaries between naturally occurring and modified organisms. However, researchers must act with caution in research and development to avoid misleading society. Furthermore, appropriate regulations should be proactively discussed and established for handling genome-editing technology.
Tips for Handling Gourds this Fall Season
Bratsch, Tony
2009-01-01
Each year, more direct market and wholesale growers are adding gourds to their fall sales mix, along with pumpkins, ornamental corn and fall mums. Proper harvest timing, handling and curing are important to ensure maximum longevity of gourds once the consumer brings them home.
Instrumentation to handle thermal polarized neutron beams
Kraan, W.H.
2004-01-01
In this thesis we investigate devices needed to handle the polarization of thermal neutron beams: Ï/2-flippers (to start/stop Larmor precession) and Ï-flippers (to reverse polarization/precession direction) and illustrate how these devices are used to investigate the properties of matter and of the
Ergonomics intervention in manual handling of oxygen
M Motamedzadeh
2013-05-01
Conclusion: With the implementation of ergonomic intervention is casting unit, the risk of exposure to musculoskeletal disorders caused by manual handling of oxygen cylinders was eliminated and safety of employees against the risk of explosion of the cylinders in comparison with before the intervention was improved.
Handling Sparse Data by Successive Abstraction
Samuelsson, C
1996-01-01
A general, practical method for handling sparse data that avoids held-out data and iterative reestimation is derived from first principles. It has been tested on a part-of-speech tagging task and outperformed (deleted) interpolation with context-independent weights, even when the latter used a globally optimal parameter setting determined a posteriori.
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 920.11 Section 920.11 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE KIWIFRUIT GROWN IN CALIFORNIA...
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 955.7 Section 955.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN GEORGIA...
Wet handling of solids using submersible pumps
Czarnota, Z.; Fahlgren, M.; Grainger, M. [ITT Flygt Slurry Laboratory, Soina (Sweden)
1996-12-31
A complete and efficient concept for handling solids in short distance pumping applications is described. The function of pump, mixer, agitator, and sump have been determined in experimental studies. The major factors that affect pump performance such as impeller design and slurry characteristics are discussed. The results apply to a range of applications in industry and mining. 10 refs., 6 figs.
Araki, Fujio; Kumagai, Kozo; Iseri, Takumi; Kawano, Tsutomu (National Hospital of Kumamoto (Japan))
1991-04-01
Dose calculation of irregularly shaped fields can be made by the Clarkson technique, which however requires considerable time and is thus not practical. We investigated a simple approximation method for determining field factors (F{sub A}) and tissue-peak ratios (TPRs) for irregularly shaped fields. By this method, we approximated scatter dose by the ratio of area for an irregularly shaped field to that for the overall field (without blocking). Maximum error of equivalent square fields as determined by this method for irregularly shaped fields was -1.3% for field factors, +2.1% for TPRs and +1.4% for the F{sub A} x TPRs. (author).
Ma Piming; Yuan Dongfeng
2005-01-01
If the degree distribution is chosen carefully, the irregular low-density parity-check (LDPC) codes can outperform the regular ones. An image transmission system is proposed by combining regular and irregular LDPC codes with 16QAM/64QAM modulation to improve both efficiency and reliability. Simulaton results show that LDPC codes are good coding schemes over fading channel in image communication with lower system complexity. More over, irregular codes can obtain a code gain of about 0.7 dB compared with regular ones when BER is 10-4. So the irregular LDPC codes are more suitable for image transmission than the regular codes.
Characterization of irregular seeds on gibbsites precipitated from caustic aluminate solutions
CHEN Guo-hui; CHEN Qi-yuan; YIN Zhou-lan; YIN Zhi-min
2006-01-01
The irregular surface of seeds on which gibbsites are precipitated from caustic aluminate solutions, was investigated according to the fractal theory. Two kinds of fractal dimensions were used to characterize these irregularity. Box-dimension and spectral dimension are based on the SEM images of seeds and diffusive dynamic equation ofthe precipitation respectively. Both these two dimensions are affected by the reaction temperature, evolved with different reaction conditions and can reflect the influence of irregularity of seeds on the precipitation rate. Box dimension is fit for the characterization of the irregular morphology of seeds, while spectral dimension can explain the fractal dynamic behavior.
Data handling and representation of freeform surfaces
Steinkopf, Ralf; Dick, Lars; Kopf, Tino; Gebhardt, Andreas; Risse, Stefan; Eberhardt, Ramona
2011-10-01
Freeform surfaces enable innovative optics. They are not limited by axis symmetry and hence they are almost free in design. They are used to reduce the installation space and enhance the performance of optical elements. State of the art optical design tools are computing with powerful algorithms to simulate freeform surfaces. Even new mathematical approaches are under development /1/. In consequence, new optical designs /2/ are pushing the development of manufacturing processes consequently and novel types of datasets have to proceed through the process chain /3/. The complexity of these data is the huge challenge for the data handling. Because of the asymmetrical and 3-dimensional surfaces of freeforms, large data volumes have to be created, trimmed, extended and fitted. All these processes must be performed without losing the accuracy of the original design data. Additionally, manifold types of geometries results in different kinds of mathematical representations of freeform surfaces and furthermore the used CAD/CAM tools are dealing with a set of spatial transport formats. These are all reasons why manufacture-oriented approaches for the freeform data handling are not yet sufficiently developed. This paper suggests a classification of freeform surfaces based on the manufacturing methods which are offered by diamond machining. The different manufacturing technologies, ranging from servo-turning to shaping, require a differentiated approach for the data handling process. The usage of analytical descriptions in form of splines and polynomials as well as the application of discrete descriptions like point clouds is shown in relation to the previously made classification. Advantages and disadvantages of freeform representations are discussed. Aspects of the data handling in between different process steps are pointed out and suitable exchange formats for freeform data are proposed. The described approach offers the possibility for efficient data handling from optical
Mackenzie, Anne I.; Baginski, Michael E.; Rao, Sadasiva M.
2008-01-01
In this work, we present an alternate set of basis functions, each defined over a pair of planar triangular patches, for the method of moments solution of electromagnetic scattering and radiation problems associated with arbitrarily-shaped, closed, conducting surfaces. The present basis functions are point-wise orthogonal to the pulse basis functions previously defined. The prime motivation to develop the present set of basis functions is to utilize them for the electromagnetic solution of dielectric bodies using a surface integral equation formulation which involves both electric and magnetic cur- rents. However, in the present work, only the conducting body solution is presented and compared with other data.
Irregularities in Pump-Induced Tilt Above Shallow Aquifers
Kuempel, H. J.; Fabian, M.
2003-12-01
Near surface ground tilt induced by the extraction of fluids from subsurface reservoirs has repeatedly been used to constrain reservoir parameters. In general, pump-induced tilt is found to be proportional in strength to the pore pressure gradient created by the pumping, to be a function of poroelastic rock parameters, and to depend on the geometric configuration of the tilt sensor and the productive sections of a well. Assuming radial flow, the strike of the tilt signal should point toward the productive well. However, inversion of near surface tilt can be hampered through irregularities in the pump-induced signal and suffer from insufficient knowledge of the influence of heterogeneities in the subsoil, either within or above the reservoir. We can learn more about the impact of such heterogeneities and reduce ambiguities by analyzing case studies. New observational data from 3 test sites in Germany confirm that a variety of causes can produce irregularities in pump-induced surface deformation, namely: (1) The strike of a tilt signal can considerably deviate from the direction toward the active well. A reason could be that the steepest effective pore pressure gradient builds up in another than radial direction (thereby generating anisotropic fluid flow). Accordingly, tilt hodographs for a complete pump cycle may be elliptic rather than follow a line. (2) The normal rule of how the signal strength depends on the horizontal and the vertical distance may be violated. Structural heterogeneities in the subsurface are the most likely cause for this behaviour. (3) Recovery of the induced tilt signal following the cessation of pumping can be incomplete. This could indicate a non-reversible compaction possibly due to overexploitation of a reservoir. (4) A transient sign reversal of ground tilt may occur during the build-up phase of the signal. This feature could be an analogue to the so-called Noordbergum effect occasionally seen in the response of well levels at locations
Reconstructing regional climate networks from irregularly sampled satellite data
Wiedermann, Marc; Donner, Reik V.; Sykioti, Olga; Papadimitriou, Constantinos; Kurths, Jürgen
2015-04-01
With the increasing availability of remote sensing data Earth System Analysis has taken a great step forward. Satellite data with high resolution in time and space allow for an in-depth analysis of small-scale processes in the climate as well as ecosystems. This data type, however, also harbors crucial conceptual complications. First, depending on whether the satellite is orbiting on an ascending or descending path systematic biases are induced into the dataset and both measurements can not be evaluated simultaneously without an appropriate preprocessing. Second, remote sensing data are usually not produced with equidistant temporal sampling, but might contain huge gaps, due to cloud cover or maintenance work and irregular time steps, due to the orbiting time of the satellite. In this work, we utilize sea surface temperature (SST) data obtained from the SMOS satellite as part of ESA's Earth Explorer Mission to study small-scale regional interactions between different parts of the Mediterranean, Aegean and Black Sea. In a first step, we create homogeneous time series for each grid point by combining data from ascending and descending satellite paths by utilizing principal component and singular spectrum analysis. To address the issue of irregular temporal sampling we utilize a kernel weighted version of the linear cross-correlation function to compute lagged correlations between all pairs of grid points in the dataset. By setting a threshold to the thus obtained correlation matrix we obtain a binary matrix which can be interpreted as the adjacency matrix of a complex network. We then use tools from complex network theory to study regional interdependencies in the study area for different time lags of up to forty days. We find that the obtained networks represent well the observed average wind directions and speeds and display interaction structures between small regions in the Aegean Sea, which are in good agreement with earlier observations. The methods presented
Regional climate network analysis from irregularly sampled satellite data
Wiedermann, Marc; Sykioti, Olga; Papadimitriou, Constantinos; Balasis, George; Kurths, Jürgen; Donner, Reik V.
2016-04-01
With the increasing availability of remote sensing data Earth System Analysis has taken a great step forward. This type of data, however, also harbors a variety of conceptual complications. First, depending on whether the satellite is orbiting on an ascending or descending path systematic biases are induced into the data, and both measurements cannot be evaluated simultaneously without an appropriate preprocessing. Second, remote sensing data are usually not produced with equidistant temporal sampling, but might contain huge gaps and irregular time steps. Third, the time period covered by the data is often too short to perform an appropriate seasonal detrending. Here, we propose a general framework to create homogeneous anomalized time series for a (multivariate) satellite data set by combining time series from ascending and descending satellite paths or even different missions using principal component and singular spectrum analysis. We then exemplarily apply our method to sea surface temperature data obtained from the SMOS satellite mission to study small-scale regional correlative patterns covering different parts of the Aegean Sea. To address the issue of irregular temporal sampling we utilize a kernel weighted version of the linear cross-correlation function to compute lagged correlations between all pairs of grid points in the data set. By binarizing the thus obtained matrices, we obtain a network representation of the system's similarity structure. Ultimately, we use tools from complex network theory to study regional interdependencies in the study area for different time lags of up to forty days. We find that the obtained networks represent well the observed average wind directions and speeds and display interaction structures between small regions in the Aegean Sea, which are in good agreement with earlier observations. In a second step, we extend the study area to the whole Mediterranean and Black Sea and investigate lagged interactions between these two
Representation of the Gravity Field of Irregularly Shaped Bodies
Reimond, Stefan; Baur, Oliver
2015-04-01
Exploratory space missions to small bodies in our solar system have gained importance over the last few decades. The well-renowned mission Rosetta set a milestone in space science history when it successfully lowered its mini-lab Philae onto the surface of Comet 67P/Churyumov-Gerasimenko in November 2014. Knowledge of the gravitational field of a small body, e.g. a comet or asteroid, is crucial in order to study a spacecraft's motion in its environment and to infer geophysical properties. Traditionally, the gravitational field of a body is modeled by means of spherical harmonics. For bodies of near-spherical shape (such as the Earth), this is an adequate method, because the reference figure, i.e. a sphere, snugly fits the body. For irregularly shaped bodies, however, the adoption of spherical harmonics might be a sub-optimal choice. As an alternative, oblate or prolate spheroidal harmonics (OH or PH, reference figure is an ellipsoid of revolution) or ellipsoidal harmonics (EH, reference figure is a tri-axial ellipsoid) should be considered. The latter will in general be the best choice in terms of aptness of the reference figure. The downside of EH, however, lies in the considerably increased (numerical) complexity of the computation of the base functions, i.e., the Lamé functions of the first and second kind. OH or PH represent a promising path down the middle. Elongated bodies (such as Asteroid 433 Eros) are often similarly well approximated by a prolate spheroid as by the corresponding tri-axial ellipsoid. Contracted bodies, on the other hand, can be described accordingly well by means of an oblate spheroid. We compare the SH, OH, PH and EH gravitational field parameterizations for different celestial bodies, including Rosetta's target comet 67P. The tasks are as follows: Based on the polyhedral representation of a body's shape model, the gravitational potential and acceleration vector is computed for evenly or irregularly distributed points inside or outside
YAMAN, Ramazan
2001-01-01
For material handling system design, material handling equipment selection is the first stage. Also the material handling system and facility layout design problems are coupled. Solving these problems needs consideration of these three different problems. Right material handling equipment selection and good design of the material handling system and facility layout can increase productivity and reduce investments and operations' costs. In this study, after describing the m...
Xie, Xiang; Zheng, Hui; Qu, Yegao
2016-07-01
A weak form variational based method is developed to study the vibro-acoustic responses of coupled structural-acoustic system consisting of an irregular acoustic cavity with general wall impedance and a flexible panel subjected to arbitrary edge-supporting conditions. The structural and acoustical models of the coupled system are formulated on the basis of a modified variational method combined with multi-segment partitioning strategy. Meanwhile, the continuity constraints on the sub-segment interfaces are further incorporated into the system stiffness matrix by means of least-squares weighted residual method. Orthogonal polynomials, such as Chebyshev polynomials of the first kind, are employed as the wholly admissible unknown displacement and sound pressure field variables functions for separate components without meshing, and hence mapping the irregular physical domain into a square spectral domain is necessary. The effects of weighted parameter together with the number of truncated polynomial terms and divided partitions on the accuracy of present theoretical solutions are investigated. It is observed that applying this methodology, accurate and efficient predictions can be obtained for various types of coupled panel-cavity problems; and in weak or strong coupling cases for a panel surrounded by a light or heavy fluid, the inherent principle of velocity continuity on the panel-cavity contacting interface can all be handled satisfactorily. Key parametric studies concerning the influences of the geometrical properties as well as impedance boundary are performed. Finally, by performing the vibro-acoustic analyses of 3D car-like coupled miniature, we demonstrate that the present method seems to be an excellent way to obtain accurate mid-frequency solution with an acceptable CPU time.
Analysis of aircraft longitudinal handling qualities
Hess, R. A.
1981-01-01
The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.
Energy efficiency in air handling applications
Fontaine, P. [Australian Baldor (Australia)
1995-07-01
It is estimated that the cost of air handling in a typical office building is $25,000 to $60,000 per 10,000 sq metres. New technologies are now available to reduce this by 50 percent with an investment that is recoverable within two years. Old systems of air handling operated at full speed with flow rates changed by mechanical vanes or dampers. The excess capacity generated is wasting energy which could be saved using modern motor controls that match the system output with actual needs. Comparisons of relative energy consumptions of different fan flow control methods show that the more time a system spends throttled down, the better candidate it is for the more efficient Variable Speed Drive (VSD) device which matches the motor`s speed to actual needs. The use of VSD instead of vanes and dampers reduces operating costs which impacts directly on profitability. 2 tables, 1 fig.
Response reduction factor of irregular RC buildings in Kathmandu valley
Chaulagain, Hemchandra; Rodrigues, Hugo; Spacone, Enrico; Guragain, Ramesh; Mallik, Radhakrishna; Varum, Humberto
2014-09-01
Most current seismic design includes the nonlinear response of a structure through a response reduction factor ( R). This allows the designer to use a linear elastic force-based approach while accounting for nonlinear behavior and deformation limits. In fact, the response reduction factor is used in modern seismic codes to scale down the elastic response of a structure. This study focuses on estimating the actual ` R' value for engineered design/construction of reinforced concrete (RC) buildings in Kathmandu valley. The ductility and overstrength of representative RC buildings in Kathmandu are investigated. Nonlinear pushover analysis was performed on structural models in order to evaluate the seismic performance of buildings. Twelve representative engineered irregular buildings with a variety of characteristics located in the Kathmandu valley were selected and studied. Furthermore, the effects of overstrength on the ductility factor, beam column capacity ratio on the building ductility, and load path on the response reduction factor, are examined. Finally, the results are further analyzed and compared with different structural parameters of the buildings.
Non-linear analysis of vibrations of irregular plates
Lobitz, D. W.; Nayfeh, A. H.; Mook, D. T.
1977-01-01
A numerical perturbation method is used to investigate the forced vibrations of irregular plates. Nonlinear terms associated with the midplane stretching are retained in the analysis. The numerical part of the method involves the use of linear, finite element techniques to determine the free oscillation mode shapes and frequencies and to obtain the linear midplane stress resultants caused by the midplane stretching. Representing the solution as an expansion in terms of these linear mode shapes, these modes and the resultants are used to determine the equations governing the time-dependent coefficients of this expansion. These equations are solved by using the method of multiple scales. Specific solutions are given for the main-resonant vibrations of an elliptical plate in the presence of internal resonances. The results indicate that modes other than the driven mode can be drawn into the steady state response. Though the excitation is composed of a single harmonic, the response may not be periodic. Moreover, the particular types of responses that can occur are highly dependent on the mode being excited and are sensitive to small geometrical changes.
New OpenMP Directives for Irregular Data Access Loops
J. Labarta
2001-01-01
Full Text Available Many scientific applications involve array operations that are sparse in nature, ie array elements depend on the values of relatively few elements of the same or another array. When parallelised in the shared-memory model, there are often inter-thread dependencies which require that the individual array updates are protected in some way. Possible strategies include protecting all the updates, or having each thread compute local temporary results which are then combined globally across threads. However, for the extremely common situation of sparse array access, neither of these approaches is particularly efficient. The key point is that data access patterns usually remain constant for a long time, so it is possible to use an inspector/executor approach. When the sparse operation is first encountered, the access pattern is inspected to identify those updates which have potential inter-thread dependencies. Whenever the code is actually executed, only these selected updates are protected. We propose a new OpenMP clause, indirect, for parallel loops that have irregular data access patterns. This is trivial to implement in a conforming way by protecting every array update, but also allows for an inspector/executor compiler implementation which will be more efficient in sparse cases. We describe efficient compiler implementation strategies for the new directive. We also present timings from the kernels of a Discrete Element Modelling application and a Finite Element code where the inspector/executor approach is used. The results demonstrate that the method can be extremely efficient in practice.
Mechanically Milled Irregular Zinc Nanoparticles for Printable Bioresorbable Electronics.
Mahajan, Bikram K; Yu, Xiaowei; Shou, Wan; Pan, Heng; Huang, Xian
2017-02-20
Bioresorbable electronics is predominantly realized by complex and time-consuming anhydrous fabrication processes. New technology explores printable methods using inks containing micro- or nano-bioresorbable particles (e.g., Zn and Mg). However, these particles have seldom been obtained in the context of bioresorbable electronics using cheap, reliable, and effective approaches with limited study on properties essential to printable electronics. Here, irregular nanocrystalline Zn with controllable sizes and optimized electrical performance is obtained through ball milling approach using polyvinylpyrrolidone (PVP) as a process control agent to stabilize Zn particles and prevent cold welding. Time and PVP dependence of the ball milled particles are studied with systematic characterizations of morphology and composition of the nanoparticles. The results reveal crystallized Zn nanoparticles with a size of ≈34.834 ± 1.76 nm and low surface oxidation. The resulting Zn nanoparticles can be readily printed onto bioresorbable substrates and sintered at room temperature using a photonic sintering approach, leading to a high conductivity of 44 643 S m(-1) for printable zinc nanoparticles. The techniques to obtain Zn nanoparticles through ball milling and processing them through photonic sintering may potentially lead to a mass fabrication method for bioresorbable electronics and promote its applications in healthcare, environmental protection, and consumer electronics.
ON THE STAR FORMATION LAW FOR SPIRAL AND IRREGULAR GALAXIES
Elmegreen, Bruce G., E-mail: bge@us.ibm.com [IBM Research Division, T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY 10598 (United States)
2015-12-01
A dynamical model for star formation on a galactic scale is proposed in which the interstellar medium is constantly condensing to star-forming clouds on the dynamical time of the average midplane density, and the clouds are constantly being disrupted on the dynamical timescale appropriate for their higher density. In this model, the areal star formation rate scales with the 1.5 power of the total gas column density throughout the main regions of spiral galaxies, and with a steeper power, 2, in the far outer regions and in dwarf irregular galaxies because of the flaring disks. At the same time, there is a molecular star formation law that is linear in the main and outer parts of disks and in dIrrs because the duration of individual structures in the molecular phase is also the dynamical timescale, canceling the additional 0.5 power of surface density. The total gas consumption time scales directly with the midplane dynamical time, quenching star formation in the inner regions if there is no accretion, and sustaining star formation for ∼100 Gyr or more in the outer regions with no qualitative change in gas stability or molecular cloud properties. The ULIRG track follows from high densities in galaxy collisions.
On the Star Formation Law for Spiral and Irregular Galaxies
Elmegreen, Bruce G
2015-01-01
A dynamical model for star formation on a galactic scale is proposed in which the interstellar medium is constantly condensing to star-forming clouds on the dynamical time of the average midplane density, and the clouds are constantly being disrupted on the dynamical time scale appropriate for their higher density. In this model, the areal star formation rate scales with the 1.5 power of the total gas column density throughout the main regions of spiral galaxies, and with a steeper power, 2, in the far outer regions and in dwarf irregular galaxies because of the flaring disks. At the same time, there is a molecular star formation law that is linear in the main and outer parts of disks and in dIrrs because the duration of individual structures in the molecular phase is also the dynamical time scale, canceling the additional 0.5 power of surface density. The total gas consumption time scales directly with the midplane dynamical time, quenching star formation in the inner regions if there is no accretion, and su...
The periodic dynamics of the irregular heterogeneous celestial bodies
Lan, Lei; Yang, Mo; Baoyin, Hexi; Li, Junfeng
2017-02-01
In this paper, we develop a methodology to study the periodic dynamics of irregular heterogeneous celestial bodies. Heterogeneous bodies are not scarce in space. It has been found that bodies, such as 4 Vesta, 624 Hektor, 87 Sylvia, 16 Psyche and 25143 Itokawa, may all have varied internal structures. They can be divided into large-scale and small-scale cases. The varied internal structures of large-scale bodies always result from gradient pressure inside, which leads to compactness differences of the inner material. However, the heterogeneity of a small-scale body is always reflected by the different densities of different areas, which may originate from collision formation from multiple objects. We propose a modeling procedure for the heterogeneous bodies derived from the conventional polyhedral method and then compare its dynamical characteristics with those of the homogeneous case. It is found that zero-velocity curves, positions of equilibrium points, types of bifurcations in the continuation of the orbital family and the stabilities of periodic orbits near the heterogeneous body are different from those in the homogeneous case. The suborbicular orbits near the equatorial plane are potential parking orbits for a future mission, so we discuss the switching of the orbital stability of the family because it has fundamental significance to orbit maintenance and operations around actual asteroids.
Irregular topography at the Earth’s inner core boundary
Dai, Zhiyang; Wang, Wei; Wen, Lianxing
2012-01-01
Compressional seismic wave reflected off the Earth’s inner core boundary (ICB) from earthquakes occurring in the Banda Sea and recorded at the Hi-net stations in Japan exhibits significant variations in travel time (from -2 to 2.5 s) and amplitude (with a factor of more than 4) across the seismic array. Such variations indicate that Earth’s ICB is irregular, with a combination of at least two scales of topography: a height variation of 14 km changing within a lateral distance of no more than 6 km, and a height variation of 4–8 km with a lateral length scale of 2–4 km. The characteristics of the ICB topography indicate that small-scale variations of temperature and/or core composition exist near the ICB, and/or the ICB topographic surface is being deformed by small-scale forces out of its thermocompositional equilibrium position and is metastable. PMID:22547788
Climatic irregular staircases: generalized acceleration of global warming.
De Saedeleer, Bernard
2016-01-27
Global warming rates mentioned in the literature are often restricted to a couple of arbitrary periods of time, or of isolated values of the starting year, lacking a global view. In this study, we perform on the contrary an exhaustive parametric analysis of the NASA GISS LOTI data, and also of the HadCRUT4 data. The starting year systematically varies between 1880 and 2002, and the averaging period from 5 to 30 yr - not only decades; the ending year also varies . In this way, we uncover a whole unexplored space of values for the global warming rate, and access the full picture. Additionally, stairstep averaging and linear least squares fitting to determine climatic trends have been sofar exclusive. We propose here an original hybrid method which combines both approaches in order to derive a new type of climatic trend. We find that there is an overall acceleration of the global warming whatever the value of the averaging period, and that 99.9% of the 3029 Earth's climatic irregular staircases are rising. Graphical evidence is also given that choosing an El Niño year as starting year gives lower global warming rates - except if there is a volcanic cooling in parallel. Our rates agree and generalize several results mentioned in the literature.
Research of CRP-based irregular 2D seismic acquisition
Zhao Hu; Yin Cheng; He Guang-Ming; Chen Ai-Ping; Jing Long-Jiang
2015-01-01
Seismic exploration in the mountainous areas of western Chinese is extremely diffi cult because of the complexity of the surface and subsurface, which results in shooting difficulties, seismic data with low signal-to-noise ratio, and strong interference. The complexity of the subsurface structure leads to strong scattering of the refl ection points; thus, the curved-line acquisition method has been used. However, the actual subsurface structural characteristics have been rarely considered. We propose a design method for irregular acquisition based on common refl ection points (CRP) to avoid diffi cult-to-shoot areas, while considering the structural characteristics and CRP positions and optimizing the surface-receiving line position. We arrange the positions of the receiving points to ensure as little dispersion of subsurface CRP as possible to improve the signal-to-noise ratio of the seismic data. We verify the applicability of the method using actual data from a site in Sichuan Basin. The proposed method apparently solves the problem of seismic data acquisition and facilitates seismic exploration in structurally complex areas.
Climatic irregular staircases: generalized acceleration of global warming
de Saedeleer, Bernard
2016-01-01
Global warming rates mentioned in the literature are often restricted to a couple of arbitrary periods of time, or of isolated values of the starting year, lacking a global view. In this study, we perform on the contrary an exhaustive parametric analysis of the NASA GISS LOTI data, and also of the HadCRUT4 data. The starting year systematically varies between 1880 and 2002, and the averaging period from 5 to 30 yr — not only decades; the ending year also varies . In this way, we uncover a whole unexplored space of values for the global warming rate, and access the full picture. Additionally, stairstep averaging and linear least squares fitting to determine climatic trends have been sofar exclusive. We propose here an original hybrid method which combines both approaches in order to derive a new type of climatic trend. We find that there is an overall acceleration of the global warming whatever the value of the averaging period, and that 99.9% of the 3029 Earth’s climatic irregular staircases are rising. Graphical evidence is also given that choosing an El Niño year as starting year gives lower global warming rates — except if there is a volcanic cooling in parallel. Our rates agree and generalize several results mentioned in the literature.
FIGGS2: An HI survey of extremely faint irregular galaxies
Patra, Narendra Nath; Karachentsev, Igor D; Sharina, Margarita E
2016-01-01
We present the observations and first results from the FIGGS2 survey. FIGGS2 is an extension of the earlier Faint Irregular Galaxies GMRT survey (FIGGS) towards faint luminosity end. The sample consists of 20 galaxies of which 15 were detected in HI 21cm line using the Giant Meter-wave Radio Telescope (GMRT). The median blue band magnitude of our sample is ~ -11.6, which is more than one magnitude fainter than earlier FIGGS survey. From our GMRT observations we find that, for many of our sample galaxies, the HI disks are offset from their optical disks. The HI diameters of the FIGGS2 galaxies show a tight correlation with their HI mass. The slope of the correlation is 2.08 +/- 0.20 similar to what is found for FIGGS galaxies. We also find that for almost all galaxies, the HI disks are larger than the optical disks which is a common trend for dwarf or spiral galaxies. The mean value of the ratio of HI to optical diameter is ~ 1.54.
Irregular persistent activity induced by synaptic excitatory feedback
Francesca Barbieri
2007-11-01
Full Text Available Neurophysiological experiments on monkeys have reported highly irregular persistent activity during the performance of an oculomotor delayed-response task. These experiments show that during the delay period the coefficient of variation (CV of interspike intervals (ISI of prefrontal neurons is above 1, on average, and larger than during the fixation period. In the present paper, we show that this feature can be reproduced in a network in which persistent activity is induced by excitatory feedback, provided that (i the post-spike reset is close enough to threshold , (ii synaptic efficacies are a non-linear function of the pre-synaptic firing rate. Non-linearity between presynaptic rate and effective synaptic strength is implemented by a standard short-term depression mechanism (STD. First, we consider the simplest possible network with excitatory feedback: a fully connected homogeneous network of excitatory leaky integrate-and-fire neurons, using both numerical simulations and analytical techniques. The results are then confirmed in a network with selective excitatory neurons and inhibition. In both the cases there is a large range of values of the synaptic efficacies for which the statistics of firing of single cells is similar to experimental data.
Measuring border irregularities of skin lesions using fractal dimensions
Ng, Vincent T. Y.; Lee, Tim K.
1996-09-01
Malignant melanoma is the most common cancer in people less than 35 years of age and incident rates are increasing by approximately 5 percent per annum in many white populations, including British Columbia, Canada. In 1994, a clinical study has been established to digitize melanocytic lesions under a controlled environment. Lesions are digitized from patients who are referred to the Colored Pigment Lesion Clinic in the University of British Columbia. In this paper, we investigate how to use fractal dimensions (FDs) in measuring the irregularity of a skin lesion. In a previous project, we have experimented with 6 different methods to calculate fractal dimensions on a small number of images of skin lesions, and the simple box-counting method performed the best. However, the method did not exploit the intensity information of the images. With the new set of images which are digitized under the controlled environment, we utilize the differential box counting method to exploit such information. Four FD measures, including the direct FD, the horizontal and the vertical smoothing FDs, and the multi- fractal dimension of order two, are calculated based on the original color images. In addition, these 4 FD features are repeatedly calculate for the blue band of the images. This paper reports the different features through the calculations of the fractal dimensions and compares their differentiation power in the use of diagnosis of images of skin lesions.
Irregular topography at the Earth's inner core boundary.
Dai, Zhiyang; Wang, Wei; Wen, Lianxing
2012-05-15
Compressional seismic wave reflected off the Earth's inner core boundary (ICB) from earthquakes occurring in the Banda Sea and recorded at the Hi-net stations in Japan exhibits significant variations in travel time (from -2 to 2.5 s) and amplitude (with a factor of more than 4) across the seismic array. Such variations indicate that Earth's ICB is irregular, with a combination of at least two scales of topography: a height variation of 14 km changing within a lateral distance of no more than 6 km, and a height variation of 4-8 km with a lateral length scale of 2-4 km. The characteristics of the ICB topography indicate that small-scale variations of temperature and/or core composition exist near the ICB, and/or the ICB topographic surface is being deformed by small-scale forces out of its thermocompositional equilibrium position and is metastable.
Influence of Ionospheric Irregularities on GNSS Remote Sensing
M. V. Tinin
2015-01-01
Full Text Available We have used numerical simulation to study the effects of ionospheric irregularities on accuracy of global navigation satellite system (GNSS measurements, using ionosphere-free (in atmospheric research and geometry-free (in ionospheric research dual-frequency phase combinations. It is known that elimination of these effects from multifrequency GNSS measurements is handi-capped by diffraction effects during signal propagation through turbulent ionospheric plasma with the inner scale being smaller than the Fresnel radius. We demonstrated the possibility of reducing the residual ionospheric error in dual-frequency GNSS remote sensing in ionosphere-free combination by Fresnel inversion. The inversion parameter, the distance to the virtual screen, may be selected from the minimum of amplitude fluctuations. This suggests the possibility of improving the accuracy of GNSS remote sensing in meteorology. In the study of ionospheric disturbances with the aid of geometry-free combination, the Fresnel inversion eliminates only the third-order error. To eliminate the random TEC component which, like the measured average TEC, is the first-order correction, we should use temporal filtering (averaging.
Thick film traps with an irregular film. Preparation and evaluation.
Kloskowski, Adam; Pettersson, Johan; Roeraade, Johan
2004-05-07
A new method for preparation of sorbent-based ultra-thick film traps for concentration of trace volatile components from gaseous matrices is described. The procedure is based on blowing a prepolymer (polydimethylsiloxane) through a capillary tube, forming an irregular film of stationary phase. Subsequently, the prepolymer is immobilized in a few seconds by heating to 200 degrees C. Evaluation of the performance of the new traps showed that the loss of efficiency, compared to regular smooth film traps is only on the order of 20-30%. In terms of breakthrough volume, this loss in performance is rather insignificant. The technology is extremely simple and allows a rapid and cheap production of a large number of ultra-thick film traps, even in non-specialized laboratories. The method can be applied to any type of cross-linkable stationary phase, thereby expanding the scope of sorbent-based trapping and preconcentration concept. Many applications are anticipated in trace and ultra-trace analysis in a wide range of fields, such as environmental chemistry, polymers, food and process analysis.
Bubble-Induced Star Formation in Dwarf Irregular Galaxies
Kawata, Daisuke; Barnes, David J; Grand, Robert J J; Rahimi, Awat
2013-01-01
To study the star formation and feedback mechanism, we simulate the evolution of an isolated dwarf irregular galaxy (dIrr) in a fixed dark matter halo, similar in size to WLM. We use the new version of our original N-body/smoothed particle chemodynamics code, GCD+, which adopts improved hydrodynamics, metal diffusion between the gas particles and new modelling of star formation and stellar wind and supernovae (SNe) feedback. Comparing the simulations with and without stellar feedback effects, we demonstrate that the collisions of bubbles produced by strong feedback can induce star formation in a more widely spread area. We also demonstrate that the metallicity in star forming regions is kept low due to the mixing of the metal-rich bubbles and the metal-poor inter-stellar medium. Our simulations also suggest that the bubble-induced star formation leads to many counter-rotating stars. The bubble-induced star formation could be a dominant mechanism to maintain star formation in dIrrs, which is different from lar...
Three-dimensional CLEM-LES of irregular detonation propagation
Maxwell, Brian; Radulescu, Matei
2016-11-01
Recently, thin-channel experiments and 2D simulations have been conducted in order to investigate the effect of turbulent mixing rates on the structure of irregular detonation wave propagation. Furthermore, the dependence of the observed cell pattern, and also the reaction zone thickness, on the mixing of burned products with pockets of unburned gases, was investigated. The current work now includes 3D simulations, which are conducted to provide further validation of, and insight into, the 2D results. All simulations have been conducted using the Compressible Linear Eddy Model for Large Eddy Simulation (CLEM-LES). To date, the 3D results are found to match closely the previous 2D results. The agrreement is partly due to sufficient resolution of the large scale fluid motions, which are observed experimentally to be predominant in only two directions. Furthermore, the CLEM-LES methodology incorporates 3D mixing effects at the subgrid level. Finally, it was found that turbulent fluctuations on the subgrid were found to give rise to statistically lower than average propagation velocities on the wave front. This lead to longer ignition delays for large amounts of gas passing through the wave, giving rise to the unburned pockets of gas observed experimentally. Authors would like to acknowledge NSERC and Shell for project funding.
Observational study of daytime ionospheric irregularities associated with typhoon
XIAO SaiGuan; SHI JianKui; ZHANG DongHe; HAO YongQiang; HUANG WeiQuan
2012-01-01
Spread-F is a manifestation of ionospheric irregularities and generally takes place at nighttime.However,it can also be observed seldom at daytime.It is recognized that acoustic gravity waves (AGWs) play an important role in triggering plasma instability which results in spread-F in the ionosphere.The typhoon is a main source of the AGWs.In this paper,two cases of ionospheric daytime spread-F in the period of typhoon were analyzed.One case was on July 29,1988 and the other was on August 01,1989.The results showed the following:1) There were some wave-like disturbances appearing in the HF Doppler records firstly,consequently the Doppler echo traces became scattered,which indicated that the ionospheric spread-F was triggered; 2) the blurred echo traces in the both two cases appeared in the morning (08:30-11:30 Beijing time) and lasted for more than two hours; 3) with the blurred echoes gradually weakening,the traveling ionospheric disturbances (TIDs) still existed and became clearer; 4) the frequency shifts in the two cases were both positive,implying the effective reflecting surface of the radio wave in the ionosphere moved downwards.These results provide good observational evidence for daytime spread-F during the typhoon period in Asian region.
Traditional and Model Based Assay of Irregular Geometry Items
MOORE, FRANK S.; SALAYMEH, SALEEM
2005-06-15
The Analytical Development Section (ADS) of SRNL was requested to perform a waste disposal assay of two heater boxes which had been used in the HB Line dissolvers. They had been sent to SRNL for study to make recommendations on how to prevent future failure of the units when they were replaced. The study having been completed, the units needed to be characterized prior to sending to Solid Waste for disposal. An assay station consisting of a turntable, HPGe detector, CANBERRA Inspector, transmission source and a portable computer was set up to do the required assays. The assays indicate the presence of U-235, Pu-239 and Cs-137. No measurable amounts of U-235 or Pu-239 were found. Therefore the Minimum Detectable Activities for U-235 and Pu-239 were calculated. For Heater Box 1, 0.23 grams of U-235 and 0.24 grams of Pu-239. For Heater Box 2, the results were 0.21 grams of U-235 and 0.21 grams of Pu-239. This paper describes and documents the assays employed to determine the amount of U, Pu and Cs contents of the heater boxes. The paper provides results of SNM assays using traditional calibration of the system and on one based on modeling. It also provides the scientific community with data that will assist the user in determining the method of choice for assaying items with irregular geometries.
A Star Formation Law for Dwarf Irregular Galaxies
Elmegreen, Bruce G
2015-01-01
The radial profiles of gas, stars, and far ultraviolet radiation in 20 dwarf Irregular galaxies are converted to stability parameters and scale heights for a test of the importance of two-dimensional (2D) instabilities in promoting star formation. A detailed model of this instability involving gaseous and stellar fluids with self-consistent thicknesses and energy dissipation on a perturbation crossing time give the unstable growth rates. We find that all locations are effectively stable to 2D perturbations, mostly because the disks are thick. We then consider the average volume densities in the midplanes, evaluated from the observed HI surface densities and calculated scale heights. The radial profiles of the star formation rates are equal to about 1% of the HI surface densities divided by the free fall times at the average midplane densities. This 1% resembles the efficiency per unit free fall time commonly found in other cases. There is a further variation of this efficiency with radius in all of our galaxi...
THE INCLINATION OF THE DWARF IRREGULAR GALAXY HOLMBERG II
F. J. Sánchez-Salcedo
2014-01-01
Full Text Available Damos restricciones al ́angulo de inclinaci ́on del disco de H i de la galaxia irregular enana Holmberg II (Ho II a partir de un an ́alisis de la estabilidad gravita cional del disco de gas en las partes externas. Encontramos que se requiere un ́angulo de inclinaci ́on medio de 27 ◦ y, por lo tanto, una velocidad circular en su parte plana de ≈ 60 km s − 1 , para tener un grado de estabilidad similar al que tienen otras galaxias. Para esa inclinaci ́on, Ho II cae en la posici ́on correcta en la relaci ́on de Tully-Fisher bar i ́onica y, adem ́as, su curva de rotaci ́on es congruente con MOND. Sin embargo, el an ́alisi s de estabilidad correspondiente indica que esta galaxia podr ́ıa ser problem ́atica para MOND porque las partes externas de esta galaxia ser ́ıan marginalmente inest ables bajo esa teor ́ıa de gravedad. Se requieren simulaciones num ́ericas de las galaxias enanas ricas en gas para ver la factibilidad de MOND.
Handling System for Iridium-192 Seeds
Carpenter, W.; Wodicka, D.
1973-01-01
A complete system is proposed for safe handling of iridium-192 seeds used to internally irradiate malignant growths. A vibratory hopper feeds the seeds onto a transport system for deposit in a magazine or storage area. A circular magazine consisting of segmented plastic tubing with holes in the walls to accommodate the seeds seems feasible. The magazine is indexed to stop and release a seed for calibration and deposition.
NB Power`s fish handling facilities
Hickman, C. N. [New Brunswick Power, Fredericton, NB (Canada)
1995-12-31
Fish handling facilities at the various hydroelectric power generating stations of New Brunswick Power on the St. John River, were described. The facilities described included the fish hoist at the Beechwood Generating Station , the fish ladder at the Tobique Generating Station and a trap and truck operation at the Mactaquac Station. Details of operating arrangements were provided. Operating issues, solutions and ongoing efforts to improve operations further, were discussed. 4 refs., 4 figs.
Reactions and interactions in handling anticancer drugs.
D'Arcy, P F
1983-01-01
The clinical toxicity of anticancer drugs has been well documented with regard to the adverse effects of treatment in patients. However, many of these drugs have a direct irritant effect on the skin, eyes, mucous membranes, and other tissues. Handled without due care, especially when being prepared for injection, most cytotoxic drugs can cause local toxic or allergic reactions; they also present hazards of carcinogenicity and mutagenicity. This spectrum of potential risk should be kept in mind by personnel administering or handling these drugs, especially in oncology units where just a few individuals may routinely and frequently reconstitute many doses of cytotoxic agents. This is work in which the hospital pharmacist should and must be involved; indeed, many of the techniques and skills required are identical with those used in standard aseptic procedures for preparing pharmaceutical products. Pharmacy departments should take the initiative in making hospital staff aware of the potential risks of handling neoplastic agents, and they should spearhead a multidisciplinary assessment for producing local guidelines for working with these drugs. This article warns practitioners about the inherent dangers of these practitioner-drug interactions and suggests ways in which they may be reduced. Information is given in tabular form regarding recommended procedures for reconstituting 24 anticancer drugs and precautions to protect the personnel handling them, especially when there is spillage of powdered or liquid drugs. Also, guidelines are given about incompatibilities with admixtures of such drugs, and the literature is reviewed relative to recent developments in hospital pharmacy departments where reconstitution of anticancer drugs has been incorporated into existing intravenous fluid preparation/admixture units. Not only has this been shown to be safer and more effective in terms of time and labor, but also it has cut the cost of injectable cytotoxic drugs by an
Browsing TAP Services with TapHandle
Louys, M.; Michel, L.; Mantelet, G.; Bonnarel, F.
2012-09-01
TapHandle is a Web application merging multiple services based on the IVOA Table Access Protocol (TAP) in one page. TAP resources are presented in an expandable tree whose leaves represent SQL tables. Both table description and content can be immediately displayed. A smart ADQL editor helps to setup queries on one table. A shopping cart facility allows users to get data of interest. A filter enriches the data layout with anchors pointing to remote services.
Statistical methods for handling incomplete data
Kim, Jae Kwang
2013-01-01
""… this book nicely blends the theoretical material and its application through examples, and will be of interest to students and researchers as a textbook or a reference book. Extensive coverage of recent advances in handling missing data provides resources and guidelines for researchers and practitioners in implementing the methods in new settings. … I plan to use this as a textbook for my teaching and highly recommend it.""-Biometrics, September 2014
Development of spent fuel remote handling technology
Yoon, Ji Sup; Park, B. S.; Park, Y. S.; Oh, S. C.; Kim, S. H.; Cho, M. W.; Hong, D. H
1997-12-01
Since the nation`s policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs
On the Borders: The Arrival of Irregular Immigrants in Malta--Some Implications for Education
Mercieca, Duncan
2007-01-01
This paper concerns the issue of the continual arrival of irregular immigrants in Malta and the problems that ensue. The view generally held is that we need to respond to the needs of irregular immigrants by providing services. However, with reference to some of Jacques Derrida's ideas, I argue in this paper that the "other"/immigrant is not there…
On the Distinction between Regular and Irregular Inflectional Morphology: Evidence from Dinka
Ladd, D. Robert; Remijsen, Bert; Manyang, Caguor Adong
2009-01-01
Discussions of the psycholinguistic significance of regularity in inflectional morphology generally deal with languages in which regular forms can be clearly identified and revolve around whether there are distinct processing mechanisms for regular and irregular forms. We present a detailed description of Dinka's notoriously irregular noun number…
Breaking Down Anonymity: Digital surveillance on irregular migrants in Germany and the Netherlands
D.W.J. Broeders (Dennis)
2009-01-01
textabstractThe presence of irregular migrants causes a tough problem for policy makers. Political and popular aversion against the presence of irregular migrants has mounted in most West-European societies for years, yet their presence remains. Their exact numbers are obviously unknown - only