Water hammer simulator

International Nuclear Information System (INIS)

Sinha, S.K.; Madia, J.; Dixon, S.

1995-01-01

The Consolidated Edison Company of New York, Inc. (Con Edison) has constructed a first-of-a-kind water hammer events simulator for use at its training center. The Learning Center, Con Edison's central training facility, intends to use the simulator as an educational tool to demonstrate the various mechanisms of the water hammer phenomenon to power plant designers, engineers and operators. The water hammer phenomenon has been studied extensively for the past 15 years for the nuclear industry. However, the acknowledge of the various water hammer mechanisms and the measures to prevent or mitigate water hammer have not been widely disseminated among the operators of fossil-fueled power plants. Con Edison personnel who operate the various generation stations and the New York City steam distribution systems are expected to benefit from the new simulator. Knowledge gained from interacting with the simulator will be very important in helping the Con Edison prevent, mitigate, or accommodate water hammer at its facilities. The water hammer simulator was fabricated in Con Edison's central machine shop. Details of the design and construction of the simulator were finalized in consultation with Creare, Inc., an engineering research firm, located in Hanover, New Hampshire. The simulator seeks to recreate the essential features of water hammer in steam mines following the buildup of cold (subcooled) water by condensation and steam-water interaction. This paper describes the fabrication, design, testing, and operation of the Con Edison water hammer simulator. A discussion of how Con Edison plans to use the facility at The Learning Center is included

Ultrasonic rotary-hammer drill

Science.gov (United States)

Bar-Cohen, Yoseph (Inventor); Badescu, Mircea (Inventor); Sherrit, Stewart (Inventor); Bao, Xiaoqi (Inventor); Kassab, Steve (Inventor)

2010-01-01

A mechanism for drilling or coring by a combination of sonic hammering and rotation. The drill includes a hammering section with a set of preload weights mounted atop a hammering actuator and an axial passage through the hammering section. In addition, a rotary section includes a motor coupled to a drive shaft that traverses the axial passage through the hammering section. A drill bit is coupled to the drive shaft for drilling by a combination of sonic hammering and rotation. The drill bit includes a fluted shaft leading to a distal crown cutter with teeth. The bit penetrates sampled media by repeated hammering action. In addition, the bit is rotated. As it rotates the fluted bit carries powdered cuttings helically upward along the side of the bit to the surface.

Hypothenar Hammer Syndrome Caused by Recreational Sports Activities and Muscle Anomaly in the Wrist

International Nuclear Information System (INIS)

Kreitner, Karl-Friedrich; Dueber, Christoph; Mueller, Lars-Peter; Degreif, Juergen

1996-01-01

A 34-year-old man with digital ischemia is reported. Angiography revealed thromboembolic occlusions of the proper digital arteries of the index, middle, and ring fingers and a tortuous ulnar artery in Guyon's canal. Though hypothenar hammer syndrome was suspected, there was no relevant occupational history. Magnetic resonance imaging and magnetic resonance angiography demonstrated an anomalous muscular sling around the ulnar artery immediately adjacent to the hook of the hamate. The ulnar artery showed mural thrombi in its tortuous segment. These findings were confirmed during operative exploration. After thrombectomy and embolectomy the involved segment of the ulnar artery was replaced by an autologous vein graft. Postoperatively there was complete resolution of the symptoms. Only during convalescence did it become clear that the patient was a passionate golfer

Water hammer research in networks

Directory of Open Access Journals (Sweden)

Anželika Jurkienė

2015-10-01

Full Text Available Formation of water hammer, its consequences and possible protection measures are rarely topics, however the problem is significant. Water hammer can form in water supply and pressurized sewage networks, for various reasons. The article presents short theory of water hammer and methodology for calculation of specific parameters. Research of water hammer was performed in real water supply and sewer networks of country. Simulation of water hammer was carried out by turning on and off water pumps in pumping station. Successful measurement of water hammer depends on accuracy of the measurement equipment, therefore during the research surge wave fluctuations were measured with especially high resolution pressure meters. Detailed analysis of water hammer and selection of protecting equipment hydraulic model of water supply network was created. Protection against water hammer helps to avoid breaking of the water network and extend operation time.

Pump-stopping water hammer simulation based on RELAP5

International Nuclear Information System (INIS)

Yi, W S; Jiang, J; Li, D D; Lan, G; Zhao, Z

2013-01-01

RELAP5 was originally designed to analyze complex thermal-hydraulic interactions that occur during either postulated large or small loss-of-coolant accidents in PWRs. However, as development continued, the code was expanded to include many of the transient scenarios that might occur in thermal-hydraulic systems. The fast deceleration of the liquid results in high pressure surges, thus the kinetic energy is transformed into the potential energy, which leads to the temporary pressure increase. This phenomenon is called water hammer. Generally water hammer can occur in any thermal-hydraulic systems and it is extremely dangerous for the system when the pressure surges become considerably high. If this happens and when the pressure exceeds the critical pressure that the pipe or the fittings along the pipeline can burden, it will result in the failure of the whole pipeline integrity. The purpose of this article is to introduce the RELAP5 to the simulation and analysis of water hammer situations. Based on the knowledge of the RELAP5 code manuals and some relative documents, the authors utilize RELAP5 to set up an example of water-supply system via an impeller pump to simulate the phenomena of the pump-stopping water hammer. By the simulation of the sample case and the subsequent analysis of the results that the code has provided, we can have a better understand of the knowledge of water hammer as well as the quality of the RELAP5 code when it's used in the water-hammer fields. In the meantime, By comparing the results of the RELAP5 based model with that of other fluid-transient analysis software say, PIPENET. The authors make some conclusions about the peculiarity of RELAP5 when transplanted into water-hammer research and offer several modelling tips when use the code to simulate a water-hammer related case

Pump-stopping water hammer simulation based on RELAP5

Science.gov (United States)

Yi, W. S.; Jiang, J.; Li, D. D.; Lan, G.; Zhao, Z.

2013-12-01

RELAP5 was originally designed to analyze complex thermal-hydraulic interactions that occur during either postulated large or small loss-of-coolant accidents in PWRs. However, as development continued, the code was expanded to include many of the transient scenarios that might occur in thermal-hydraulic systems. The fast deceleration of the liquid results in high pressure surges, thus the kinetic energy is transformed into the potential energy, which leads to the temporary pressure increase. This phenomenon is called water hammer. Generally water hammer can occur in any thermal-hydraulic systems and it is extremely dangerous for the system when the pressure surges become considerably high. If this happens and when the pressure exceeds the critical pressure that the pipe or the fittings along the pipeline can burden, it will result in the failure of the whole pipeline integrity. The purpose of this article is to introduce the RELAP5 to the simulation and analysis of water hammer situations. Based on the knowledge of the RELAP5 code manuals and some relative documents, the authors utilize RELAP5 to set up an example of water-supply system via an impeller pump to simulate the phenomena of the pump-stopping water hammer. By the simulation of the sample case and the subsequent analysis of the results that the code has provided, we can have a better understand of the knowledge of water hammer as well as the quality of the RELAP5 code when it's used in the water-hammer fields. In the meantime, By comparing the results of the RELAP5 based model with that of other fluid-transient analysis software say, PIPENET. The authors make some conclusions about the peculiarity of RELAP5 when transplanted into water-hammer research and offer several modelling tips when use the code to simulate a water-hammer related case.

Treatise on water hammer in hydropower standards and guidelines

International Nuclear Information System (INIS)

Bergant, A; Mazij, J; Karney, B; Pejović, S

2014-01-01

This paper reviews critical water hammer parameters as they are presented in official hydropower standards and guidelines. A particular emphasize is given to a number of IEC standards and guidelines that are used worldwide. The paper critically assesses water hammer control strategies including operational scenarios (closing and opening laws), surge control devices (surge tank, pressure regulating valve, flywheel, etc.), redesign of the water conveyance system components (tunnel, penstock), or limitation of operating conditions (limited operating range) that are variably covered in standards and guidelines. Little information is given on industrial water hammer models and solutions elsewhere. These are briefly introduced and discussed in the light of capability (simple versus complex systems), availability of expertise (in house and/or commercial) and uncertainty. The paper concludes with an interesting water hammer case study referencing the rules and recommendations from existing hydropower standards and guidelines in a view of effective water hammer control. Recommendations are given for further work on development of a special guideline on water hammer (hydraulic transients) in hydropower plants

Treatise on water hammer in hydropower standards and guidelines

Science.gov (United States)

Bergant, A.; Karney, B.; Pejović, S.; Mazij, J.

2014-03-01

This paper reviews critical water hammer parameters as they are presented in official hydropower standards and guidelines. A particular emphasize is given to a number of IEC standards and guidelines that are used worldwide. The paper critically assesses water hammer control strategies including operational scenarios (closing and opening laws), surge control devices (surge tank, pressure regulating valve, flywheel, etc.), redesign of the water conveyance system components (tunnel, penstock), or limitation of operating conditions (limited operating range) that are variably covered in standards and guidelines. Little information is given on industrial water hammer models and solutions elsewhere. These are briefly introduced and discussed in the light of capability (simple versus complex systems), availability of expertise (in house and/or commercial) and uncertainty. The paper concludes with an interesting water hammer case study referencing the rules and recommendations from existing hydropower standards and guidelines in a view of effective water hammer control. Recommendations are given for further work on development of a special guideline on water hammer (hydraulic transients) in hydropower plants.

Water hammer research in networks

OpenAIRE

Anželika Jurkienė; Mindaugas Rimeika

2015-01-01

Formation of water hammer, its consequences and possible protection measures are rarely topics, however the problem is significant. Water hammer can form in water supply and pressurized sewage networks, for various reasons. The article presents short theory of water hammer and methodology for calculation of specific parameters. Research of water hammer was performed in real water supply and sewer networks of country. Simulation of water hammer was carried out by turning on and off water pumps...

Water hammer and its effect on ageing: an analytical study

International Nuclear Information System (INIS)

Kedia, Suruchi

2006-01-01

Water hammer can be disastrous from the point of view of ageing of the pipe(s)/Piping system. Design of restraints and protection devices for the various piping systems must consider severe stresses that may generate because of fluid transients. These fluid transients are termed as water hammer when it is restricted to water. But to have limited margins on the stress loads of piping system it is very important to predict the actual dimensions of the stresses. This paper covers various causes and analyses of the situations under which water hammer waves get generated and also way(s) to have control on occurrences of such situations. Few case studies are also covered showing the results and graphs of the stress waves generated because of water hammer. Effort has also been made in the paper in the direction to find out the methodology to compute the ageing of the system because of water hammer waves. Further in this paper an attempt is made to show the systematic methodology towards the diagnosis of water hammer that can be treated as a foundation stone for the creation of water hammer diagnosis system. Active measures to minimize the water hammer intensity by influencing fluid dynamic conditions of the system will also be suggested. Finally the paper will present the ageing aspects because of the stresses that generate due to water hammer. (author)

Optimization of Mud Hammer Drilling Performance--A Program to Benchmark the Viability of Advanced Mud Hammer Drilling

Energy Technology Data Exchange (ETDEWEB)

Arnis Judzis

2006-03-01

Operators continue to look for ways to improve hard rock drilling performance through emerging technologies. A consortium of Department of Energy, operator and industry participants put together an effort to test and optimize mud driven fluid hammers as one emerging technology that has shown promise to increase penetration rates in hard rock. The thrust of this program has been to test and record the performance of fluid hammers in full scale test conditions including, hard formations at simulated depth, high density/high solids drilling muds, and realistic fluid power levels. This paper details the testing and results of testing two 7 3/4 inch diameter mud hammers with 8 1/2 inch hammer bits. A Novatek MHN5 and an SDS Digger FH185 mud hammer were tested with several bit types, with performance being compared to a conventional (IADC Code 537) tricone bit. These tools functionally operated in all of the simulated downhole environments. The performance was in the range of the baseline ticone or better at lower borehole pressures, but at higher borehole pressures the performance was in the lower range or below that of the baseline tricone bit. A new drilling mode was observed, while operating the MHN5 mud hammer. This mode was noticed as the weight on bit (WOB) was in transition from low to high applied load. During this new ''transition drilling mode'', performance was substantially improved and in some cases outperformed the tricone bit. Improvements were noted for the SDS tool while drilling with a more aggressive bit design. Future work includes the optimization of these or the next generation tools for operating in higher density and higher borehole pressure conditions and improving bit design and technology based on the knowledge gained from this test program.

TPS-HAMMER: improving HAMMER registration algorithm by soft correspondence matching and thin-plate splines based deformation interpolation.

Science.gov (United States)

Wu, Guorong; Yap, Pew-Thian; Kim, Minjeong; Shen, Dinggang

2010-02-01

We present an improved MR brain image registration algorithm, called TPS-HAMMER, which is based on the concepts of attribute vectors and hierarchical landmark selection scheme proposed in the highly successful HAMMER registration algorithm. We demonstrate that TPS-HAMMER algorithm yields better registration accuracy, robustness, and speed over HAMMER owing to (1) the employment of soft correspondence matching and (2) the utilization of thin-plate splines (TPS) for sparse-to-dense deformation field generation. These two aspects can be integrated into a unified framework to refine the registration iteratively by alternating between soft correspondence matching and dense deformation field estimation. Compared with HAMMER, TPS-HAMMER affords several advantages: (1) unlike the Gaussian propagation mechanism employed in HAMMER, which can be slow and often leaves unreached blotches in the deformation field, the deformation interpolation in the non-landmark points can be obtained immediately with TPS in our algorithm; (2) the smoothness of deformation field is preserved due to the nice properties of TPS; (3) possible misalignments can be alleviated by allowing the matching of the landmarks with a number of possible candidate points and enforcing more exact matches in the final stages of the registration. Extensive experiments have been conducted, using the original HAMMER as a comparison baseline, to validate the merits of TPS-HAMMER. The results show that TPS-HAMMER yields significant improvement in both accuracy and speed, indicating high applicability for the clinical scenario. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Dynamic Analysis of Hammer Mechanism "Twin Hammer" of Impact Wrench

Science.gov (United States)

Konečný, M.; Slavík, J.

This paper describes function of the hammer mechanism "Twin hammer" the impact wrench, calculation of dynamic forces exerted on the mechanism and determining the contact pressures between the parts of the mechanism. The modelling of parts was performed in system Pro ENGINEER—standard. The simulation and finding dynamic forces was performed in advanced module Pro ENGINEER—mechanism design and finding contacts pressures in modul Pro ENGENEER—mechanica.

High-tech hammer : BBJ Tools transforms the traditional fluid hammer into a revolutionary drilling tool

Energy Technology Data Exchange (ETDEWEB)

Byfield, M.

2010-12-15

This article described BBJ Tools' patent-pending fluid hammer that enhances drilling rate of penetration. The technology was awarded the 2010 winner for best drilling technology for a company with fewer than 100 employees. The fluid hammer features several improvements in terms of maintaining drill-bit integrity, steering ability, and operating flexibility. The hammer incorporates a positive displacement motor and adjustable housing that uniquely allow the driller to steer the drill bit. The fluid hammer works with both polycrystalline diamond compact bits and roller cones. The unique weight-to-bit-transfer design allows the operator to have diversified percussion control. More weight on the bit results in more force, and hammering stops when weight is taken off the bit. The major components of the mud motor are incorporated into the fluid hammer, allowing the tool to compete in every application in which a mud motor is used. The percussion mechanism transmits left-hand reactive torque to the housing. The rate of penetration is substantially better than other similar tools on the market. 2 figs.

Analysis of water hammer phenomena in RBMK-1500 reactor main circulation circuit

International Nuclear Information System (INIS)

Kaliatka, A.; Uspuras, E.; Vaisnoras, M.

2006-01-01

Water hammer can occur in any thermal-hydraulic systems. Water hammer can reach pressure levels far exceeding the pressure range of a pipe given by the manufacturer, and it can lead to the failure of the pipeline integrity. In the past three decades, since a large number of water hammer events occurred in the light-water- reactor power plants, a number of comprehensive studies on the phenomena associated with water hammer events have been performed. There are three basic types of severe water hammer occurring at power plants that can result in significant plant damage: rapid valve operation events; void-induced water hammer; condensation-induced water hammer. Correct prediction of water hammer transients, is therefore of paramount importance for the safe operation of the plant. Therefore verifying of computer codes capability to simulate water hammer type transients is very important issue at performing of safety analyses for nuclear power plants. Verification of RELAP5/MOD3.3 code capability to simulate water hammer type transients employing the experimental investigations is presented. Experience gained from benchmarking analyses has been used at development of the detail RELAP5 code RBMK-1500 model for simulation of water hammer effects in reactor main circulation circuit. Analysis of reactor cooling system shows, that water hammers can occur in main circulation circuit of RBMK-1500 reactor in cases of: (1) Guillotine break of the inlet piping upstream of the Group Distribution Header and (2) Guillotine break of the pressure piping upstream the Main Circulation Pump check valve. Analysis of above mentioned accident scenarios is presented in this paper. First scenario of the accident potentially is more dangerous, because the pressure pulses influence not only the reactor cooling circuit, but also the piping of safety related system (Emergency Core Cooling System pipeline) connected to affected Group Distribution Header. The performed analysis using RELAP5 code

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

Energy Technology Data Exchange (ETDEWEB)

Arnis Judzis

2003-01-01

This document details the progress to date on the ''OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING'' contract for the quarter starting October 2002 through December 2002. Even though we are awaiting the optimization portion of the testing program, accomplishments included the following: (1) Smith International participated in the DOE Mud Hammer program through full scale benchmarking testing during the week of 4 November 2003. (2) TerraTek acknowledges Smith International, BP America, PDVSA, and ConocoPhillips for cost-sharing the Smith benchmarking tests allowing extension of the contract to add to the benchmarking testing program. (3) Following the benchmark testing of the Smith International hammer, representatives from DOE/NETL, TerraTek, Smith International and PDVSA met at TerraTek in Salt Lake City to review observations, performance and views on the optimization step for 2003. (4) The December 2002 issue of Journal of Petroleum Technology (Society of Petroleum Engineers) highlighted the DOE fluid hammer testing program and reviewed last years paper on the benchmark performance of the SDS Digger and Novatek hammers. (5) TerraTek's Sid Green presented a technical review for DOE/NETL personnel in Morgantown on ''Impact Rock Breakage'' and its importance on improving fluid hammer performance. Much discussion has taken place on the issues surrounding mud hammer performance at depth conditions.

Review of two-phase water hammer

International Nuclear Information System (INIS)

Beuthe, T.G.

1997-01-01

In a thermalhydraulic system like a nuclear power plant, where steam and water mix and are used to transport large amounts of energy, there is a potential to create two-phase water hammer. Large water hammer pressure transients are a threat to piping integrity and represent an important safety concern. Such events may cause unscheduled plant down time. The objective of this review is to provide a summary of the information on two-phase water hammer available in the open literature with particular emphasis on water hammer occurrences in nuclear power plants. Past reviews concentrated on studies concerned with preventing water hammer. The present review focuses on the fundamental experimental, analytical, and modelling studies. The papers discussed here were chosen from searches covering up to July 1993. (author)

Water hammers in direct contact heater systems

International Nuclear Information System (INIS)

Uffer, R.

1983-01-01

This paper discusses the causes and mitigation or prevention of water hammers occurring in direct contact heaters and their attached lines. These water hammers are generally caused by rapid pressure reductions in the heaters or by water lines not flowing full. Proper design and operating measures can prevent or mitigate water hammer occurrence. Water hammers often do not originate at the areas where damage is noted

Observations on steam generator water hammer

International Nuclear Information System (INIS)

Hildebrandt, P.C.

1979-01-01

The present state of understanding of water hammer phenomena apparently does not permit analytically predicting the occurrence or consequence of water hammer, with any confidence, or conclusively evaluating the benefit associated with any particular action taken to ameliorate an existing or potential water hammer problem. Features or fixes are incorporated based on overwhelming the problem, and trial and error

Specific Characteristics of Injuries Inflicted by Claw Hammer.

Science.gov (United States)

Buchaillet, Céline; Gaudin, Arnaud; Rougé-Maillart, Clotilde; Jousset, Nathalie

2016-09-01

Claw hammers have the specific characteristic of having two distinct ends: one a flat head of variable form, the other bifurcated. So the use of this tool as a blunt instrument will cause varying injuries. The authors present two clinical cases of assault with a claw hammer. Examinations revealed two types of wound. A first injury composed of integumentary lacerations and underlying bone injuries in terms of "shape" suggested the use of a blunt instrument. A second injury made up of damage showing two parallel wounds or two wounds located one in the extension of the other suggested the use of an object with a bifurcated end. The combination of both types of injury should alert examiners to the possibility of the use of a claw hammer in causing the injuries in order to help direct investigators in their investigations and in the search for the weapon used. © 2016 American Academy of Forensic Sciences.

Meshless computation of water hammer

NARCIS (Netherlands)

Tijsseling, A.S.; Bergant, A.

2007-01-01

Water hammer concerns the generation, propagation, reflection and damping of pressure waves in liquidfilled pipe systems. The numerical simulation of water-hammer events is usually based on one-dimensional mathematical models. Two equations representing the conservation of mass and momentum govern

Assessment of Analytic Water hammer Pressure Model of FAI/08-70

International Nuclear Information System (INIS)

Park, Ju Yeop; Yoo, Seung Hun; Seul, Kwang-Won

2016-01-01

In evaluating water hammer effect on the safety related systems, methods developed by the US utility are likely to be adopted in Korea. For example, the US utility developed specific methods to evaluate pressure and loading transient on piping due to water hammer as in FAI/08-70. The methods of FAI/08-70 would be applied in Korea when any regulatory request on the evaluation of water hammer effect due to the non-condensable gas accumulation in the safety related systems. Specifically, FAI/08-70 gives an analytic model which can be used to analyze the maximum transient pressure and maximum transient loading on the piping of the safety-related systems due to the non-condensable induced water hammer effect. Therefore, it seems to be meaningful to review the FAI/08-70 methods and attempt to apply the methods to a specific case to see if they really give reasonable estimate before the application of FAI/08-70 methods to domestic nuclear power plants. In the present study, analytic water hammer pressure model of FAI/08-70 is reviewed in detail and the model is applied to the specific experiment of FAI/08-70 to see if the analytic water hammer pressure model really gives reasonable estimate of the peak water hammer pressure. Specifically, we assess the experiment 52A of FAI/08-70 which adopts flushed initial condition with a short rising piping length and a high level piping length of 51inch. The calculated analytic water hammer pressure peak shows a close agreement with the measured experimental data of 52A. Unfortunately, however, the theoretical value is a little bit less than that of the experimental value. This implies the analytic model of FAI/08-70 is not conservative

Assessment of Analytic Water hammer Pressure Model of FAI/08-70

Energy Technology Data Exchange (ETDEWEB)

Park, Ju Yeop; Yoo, Seung Hun; Seul, Kwang-Won [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2016-10-15

In evaluating water hammer effect on the safety related systems, methods developed by the US utility are likely to be adopted in Korea. For example, the US utility developed specific methods to evaluate pressure and loading transient on piping due to water hammer as in FAI/08-70. The methods of FAI/08-70 would be applied in Korea when any regulatory request on the evaluation of water hammer effect due to the non-condensable gas accumulation in the safety related systems. Specifically, FAI/08-70 gives an analytic model which can be used to analyze the maximum transient pressure and maximum transient loading on the piping of the safety-related systems due to the non-condensable induced water hammer effect. Therefore, it seems to be meaningful to review the FAI/08-70 methods and attempt to apply the methods to a specific case to see if they really give reasonable estimate before the application of FAI/08-70 methods to domestic nuclear power plants. In the present study, analytic water hammer pressure model of FAI/08-70 is reviewed in detail and the model is applied to the specific experiment of FAI/08-70 to see if the analytic water hammer pressure model really gives reasonable estimate of the peak water hammer pressure. Specifically, we assess the experiment 52A of FAI/08-70 which adopts flushed initial condition with a short rising piping length and a high level piping length of 51inch. The calculated analytic water hammer pressure peak shows a close agreement with the measured experimental data of 52A. Unfortunately, however, the theoretical value is a little bit less than that of the experimental value. This implies the analytic model of FAI/08-70 is not conservative.

21 CFR 890.1450 - Powered reflex hammer.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Powered reflex hammer. 890.1450 Section 890.1450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... hammer. (a) Identification. A powered reflex hammer is a motorized device intended for medical purposes...

Electromagnetic Hammer for Metalworking

Science.gov (United States)

Anderson, S. A.; Brunet, F.; Dowd, A.; Durham, R.; Ezell, J.; Gorr, G.; Hartley, D.; Jackson, F.; Marchand, J.; Macfarlane, W.;

A Universal Rig for Supporting Large Hammer Drills: Reduced Injury Risk and Improved Productivity.

Science.gov (United States)

Rempel, David; Barr, Alan

2015-10-01

Drilling holes into concrete with heavy hammer and rock drills is one of the most physically demanding tasks performed in commercial construction and poses risks for musculoskeletal disorders, noise induced hearing loss, hand arm vibration syndrome and silicosis. The aim of this study was to (1) use a participatory process to develop a rig to support pneumatic rock drills or large electric hammer drills in order to reduce the health risks and (2) evaluate the usability of the rig. Seven prototype rigs for supporting large hammer drills were developed and modified with feedback from commercial contractors and construction workers. The final design was evaluated by laborers and electricians (N=29) who performed their usual concrete drilling with the usual method and the new rig. Subjective regional fatigue was significantly less in the neck, shoulders, hands and arms, and lower back) when using the universal rig compared to the usual manual method. Usability ratings for the rig were significantly better than the usual method on stability, control, drilling, accuracy, and vibration. Drilling time was reduced by approximately 50% with the rig. Commercial construction contractors, laborers and electricians who use large hammer drills for drilling many holes should consider using such a rig to prevent musculoskeletal disorders, fatigue, and silicosis.

Automated Grid Monitoring for LHCb through HammerCloud

CERN Multimedia

CERN. Geneva

2015-01-01

The HammerCloud system is used by CERN IT to monitor the status of the Worldwide LHC Computing Grid (WLCG). HammerCloud automatically submits jobs to WLCG computing resources, closely replicating the workflow of Grid users (e.g. physicists analyzing data). This allows computation nodes and storage resources to be monitored, software to be tested (somewhat like continuous integration), and new sites to be stress tested with a heavy job load before commissioning. The HammerCloud system has been in use for ATLAS and CMS experiments for about five years. This summer's work involved porting the HammerCloud suite of tools to the LHCb experiment. The HammerCloud software runs functional tests and provides data visualizations. HammerCloud's LHCb variant is written in Python, using the Django web framework and Ganga/DIRAC for job management.

Hypothenar hammer syndrome: case report and literature review Síndrome do martelo hipotenar: relato de caso e revisão da literatura

Directory of Open Access Journals (Sweden)

Márcia Maria Muniz de Queiroz

2013-01-01

Full Text Available Case report of a 69 year-old patient, with history of repetitive trauma events in the wrist, clinically simulating tenosynovitis, being held with Doppler Ultrasound and Magnetic Nuclear Resonance, which showed ulnar artery thrombosis. The accurate diagnosis of the hammer hypothenar disease through those tests enable an early intervention, improving the prognosis of patients affected by this rare disease.Paciente de 69 anos, com história de traumas repetitivos no punho, simulando clinicamente tenossinovite, sendo feitas ultrassonografia com doppler e ressonância nuclear magnética, que evidenciaram trombose da artéria ulnar. O diagnóstico preciso da doença do martelo hipotenar por meio desses exames possibilita uma intervenção precoce e melhora o prognóstico dos pacientes acometidos por essa rara afecção.

Muscle fibre type composition and body composition in hammer throwers.

Science.gov (United States)

Terzis, Gerasimos; Spengos, Konstantinos; Kavouras, Stavros; Manta, Panagiota; Georgiadis, Giorgos

2010-01-01

Aim of the present study was to describe the muscle fibre type composition and body composition of well-trained hammer throwers. Six experienced hammer throwers underwent the following measurements: one repetition maximum in squat, snatch, and clean, standing broad jump, backward overhead shot throw and the hammer throw. Dual x-ray absorptiometry was used for body composition analysis. Fibre type composition and cross sectional area was determined in muscle biopsy samples of the right vastus lateralis. Eight physical education students served as a control group. One repetition maximum in squat, snatch and clean for the hammer throwers was 245 ± 21, 132 ± 13 and 165 ± 12kg, respectively. Lean body mass was higher in hammer throwers (85.9 ± 3. 9kg vs. 62.7 ± 5.1kg (p hammer throwers and 51 ± 8% in the control group (p Hammer throwers had significantly larger type IIA fibres (7703 ± 1171 vs. 5676 ± 1270μm(2), p Hammer throwing performance correlated significantly with lean body mass (r = 0.81, p hammer throwers have larger lean body mass and larger muscular areas occupied by type II fibres, compared with relatively untrained subjects. Moreover, it seems that the enlarged muscle mass of the hammer throwers contributes significantly to the hammer throwing performance. Key pointsWell-trained hammer throwers had increased lean body mass, higher type IIA muscle fibres cross sectional areas, as well as higher bone mineral density, compared to controls.Increased lean body mass was closely related with hammer throwing performance.The relative high percentage of type IIX muscle fibres in vastus lateralis in hammer throwers warrants further investigation.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

Energy Technology Data Exchange (ETDEWEB)

Alan Black; Arnis Judzis

2003-01-01

Progress during current reporting year 2002 by quarter--Progress during Q1 2002: (1) In accordance to Task 7.0 (D. No.2 Technical Publications) TerraTek, NETL, and the Industry Contributors successfully presented a paper detailing Phase 1 testing results at the February 2002 IADC/SPE Drilling Conference, a prestigious venue for presenting DOE and private sector drilling technology advances. The full reference is as follows: IADC/SPE 74540 ''World's First Benchmarking of Drilling Mud Hammer Performance at Depth Conditions'' authored by Gordon A. Tibbitts, TerraTek; Roy C. Long, US Department of Energy, Brian E. Miller, BP America, Inc.; Arnis Judzis, TerraTek; and Alan D. Black, TerraTek. Gordon Tibbitts, TerraTek, will presented the well-attended paper in February of 2002. The full text of the Mud Hammer paper was included in the last quarterly report. (2) The Phase 2 project planning meeting (Task 6) was held at ExxonMobil's Houston Greenspoint offices on February 22, 2002. In attendance were representatives from TerraTek, DOE, BP, ExxonMobil, PDVSA, Novatek, and SDS Digger Tools. (3) PDVSA has joined the advisory board to this DOE mud hammer project. PDVSA's commitment of cash and in-kind contributions were reported during the last quarter. (4) Strong Industry support remains for the DOE project. Both Andergauge and Smith Tools have expressed an interest in participating in the ''optimization'' phase of the program. The potential for increased testing with additional Industry cash support was discussed at the planning meeting in February 2002. Progress during Q2 2002: (1) Presentation material was provided to the DOE/NETL project manager (Dr. John Rogers) for the DOE exhibit at the 2002 Offshore Technology Conference. (2) Two meeting at Smith International and one at Andergauge in Houston were held to investigate their interest in joining the Mud Hammer Performance study. (3) SDS Digger Tools (Task 3

Water-hammer prevention, mitigation, and accommodation: a perspective

International Nuclear Information System (INIS)

Kim, J.H.

1987-01-01

The purpose of this paper is to present an industry perspective on water hammer, revisit the issues, and renew interest in this area with aim to prevent, mitigate, and accommodate water hammer. Water hammer keeps recurring in nuclear power plants and damages plant components and impacts on plant operations and availability through forced outages of plants. The implication is that water hammer in nuclear power plants still needs attention and is a problem that has not been fundamentally resolved. The paper displays statistics of the reported water hammer events between 1969 and 1985. The consequences of these water hammer events were: pipe support damage (hangers, anchors, and snubbers), 60%; component damage (piping, pumps, and valves), 17%; reactor trip, 10%; and plant shutdown, 7%. Reactor trips and plant shutdowns account for 17% of the event consequences. At the request of the nuclear utility industry, a workshop on water hammer was sponsored by the Electric Power Research Institute (EPRI), with cosponsorship from Northeast Utility Service Company, Yankee Atomic Electric Company, and Boston Edison Company, which drew some 90 specialists representing 28 utility companies as well as other nuclear industry, academia, and the NRC. The workshop recommendations are summarized

Numerical and in-situ investigations of water hammer effects in Drava river Kaplan turbine hydropower plants

International Nuclear Information System (INIS)

Bergant, A; Gregorc, B; Gale, J

2012-01-01

This paper deals with critical flow regimes that may induce unacceptable water hammer in Kaplan turbine hydropower plants. Water hammer analysis should be performed for normal, emergency and catastrophic operating conditions. Hydropower plants with Kaplan turbines are usually comprised of relatively short inlet and outlet conduits. The rigid water hammer theory can be used for this case. For hydropower plants with long penstocks the elastic water hammer should be used. Some Kaplan turbine units are installed in systems with long open channels. In this case, water level oscillations in the channels should be carefully investigated. Computational results are compared with results of measurements in recently rehabilitated seven Drava river hydroelectric power plants in Slovenia. Water hammer in the six power plants is controlled by appropriate adjustment of the wicket gates and runner blades closing/opening manoeuvres. Due to very long inflow and outflow open channels in Zlatolicje HPP a special vaned pressure regulating device attenuates extreme pressures in Kaplan turbine flow-passage system and controls unsteady flow in both open channels. Comparisons of results include normal operating regimes. The agreement between computed and measured results is reasonable.

Numerical and in-situ investigations of water hammer effects in Drava river Kaplan turbine hydropower plants

Science.gov (United States)

Bergant, A.; Gregorc, B.; Gale, J.

2012-11-01

This paper deals with critical flow regimes that may induce unacceptable water hammer in Kaplan turbine hydropower plants. Water hammer analysis should be performed for normal, emergency and catastrophic operating conditions. Hydropower plants with Kaplan turbines are usually comprised of relatively short inlet and outlet conduits. The rigid water hammer theory can be used for this case. For hydropower plants with long penstocks the elastic water hammer should be used. Some Kaplan turbine units are installed in systems with long open channels. In this case, water level oscillations in the channels should be carefully investigated. Computational results are compared with results of measurements in recently rehabilitated seven Drava river hydroelectric power plants in Slovenia. Water hammer in the six power plants is controlled by appropriate adjustment of the wicket gates and runner blades closing/opening manoeuvres. Due to very long inflow and outflow open channels in Zlatoličje HPP a special vaned pressure regulating device attenuates extreme pressures in Kaplan turbine flow-passage system and controls unsteady flow in both open channels. Comparisons of results include normal operating regimes. The agreement between computed and measured results is reasonable.

Water-hammer experimental set-up and water-hammer experimental study for new types of check valve applied to PWR

International Nuclear Information System (INIS)

Liu Hanxun.

1985-01-01

This paper describes a self-designed constant temperature water-hammer shock test rig with stainless steel loop in which deionized water is used as working medium. To conduct water-hammer shock simulation tests for the countercurrent phenomenon occurred in the process of shutting, stopping, parallelling and switching the coolant loops of nuclear reactor, a specially designed four-way switching valve and its pneumatic mechanism are used. Water-hammer experimental study is performed for two types of PWR's nonshock check valve with diameter of 150 mm and 200 mm simultaneously. Transient performance of the shock waves, magnitude of their peaks and durations of their fluctuation, is obtained. Some analyses for existing calculational method on water-hammer are made

Water hammer in USA nuclear power plants and it's evaluation

International Nuclear Information System (INIS)

Liu Shuqian.

1987-01-01

The results of evaluations about the water hammer events in USA nuclear power plants in recent years are summarily reported. The evaluations included underlying causes and frequency of water hammer events, damages incurred and systems affected. Through the evaluations about water hammer events and on the basis of past operation experiences in nuclear power plants, the design and operational modifications to prevent or mitigate water hammer events were presented. The NRC's current opinions relating to the water hammer problems are summarized, the importance of water hammer events for nuclear power plants construction in China is indicated

Water hammer effect in the spiral case and penstock of Francis turbines

Science.gov (United States)

Pepa, D.; Ursoniu, C.; Gillich, R. N.; Campian, C. V.

2017-01-01

Sudden pressure increases in the penstock or spiral case of a hydraulic turbine are the effect of sudden flow variation that occur during transient processes of type opening / closing or load rejection of the hydro unit. The consequence of the pressure rise in the spiral case and penstock is the water hammer phenomenon, whose effects can be devastating in some cases, up to breaking pipes and calamities produced in the area. This paper aims to analyze the method of calculation of the maximum pressure values that might occur in load rejection situations to a hydraulic turbine, in spiral case and in penstock, conditioned by the limiting of the values of the over speed and measures of limiting the increase in pressure in conjunction with limiting the increase in speed in these specific processes. As an example, we studied and analyzed the situation of a hydroelectric power plant equipped with a 7.8 MW Francis turbine without pressure regulator and the inflow surge. The results of analytical calculation overlaid on the experimental measurements performed during the performance tests of the hydro unit lead to the conclusion that the calculation algorithm proposed has been chosen correctly and the 2-stage closing law of the wicket gate promoted in this case is effective in such situations.

Water Hammer in Pumped Sewer Mains

DEFF Research Database (Denmark)

Larsen, Torben

This publication is intended for engineers seeking an introduction to the problem of water hammer in pumped pressure mains. This is a subject of increasing interest because of the development of larger and more integrated sewer systems. Consideration of water hammer is essential for structural...

On the Wave Stresses in the Rods of Anvil Hammers

Directory of Open Access Journals (Sweden)

V. M. Sinitskiy

2014-01-01

Full Text Available With operating anvil hammers, there are rigid impacts of die tools, and as a result, almost instantaneous impact stops of the falling parts of hammer. Such operating conditions lead to the accelerated breakdowns of rods because of significant wave stresses arising in them. Common differential and integral methods to estimate wave stresses are widespread in engineering practice. However, to use them a researcher has to possess certain skills and special software. We consider the method for estimating the wave stresses in the rods of anvil hammers based on Laplace transforms (LT of wave equation. The article shows a procedure to set up and solve differential wave equations by operator method. These equations describe the wave propagation process of strains and stresses in the rods of anvil hammers with rigid impact and taking into account a damping rod connection with the head of hammer. The method takes into consideration an influence of both piston and rod weights and of mechanical and geometrical characteristics of rod on the stress value in the placement of rod in hammer head. Results analysis shows that a sufficiently efficient method for practical improving the durability of rods is the method of damping impact load on the rod through setting the damping devices in the form either of elastic "pad" of one or another design or of hydraulic shock absorbers in the placement of its connection with the hammer head. In this case there is a change of the wave front, it becomes flatter. It is shown that the stresses in the rod are proportional to the amount of wave stresses because of the own impact of rod and piston, which make a total weight of the system. Effect of piston weight on the stresses value at the rod during impact is directly proportional to the ratio of its weight to the rod weight. The geometric parameters of rod and the speed of the falling parts before the impact also influence on the value of stresses in the rod.The represented

Correlation of the manual compaction hammer with mechanical hammers for the Marshall method of design for asphaltic concrete.

Science.gov (United States)

1964-09-01

The purpose of this investigation was to establish, through a series of correlations, the compactive effort (number of blows) needed using the mechanical hammers to yield similar physical properties obtained with 75 blows of the manual hammer.

Impact Driver With Integral Sliding Hammer

Science.gov (United States)

Wallace, Bilby J.

1987-01-01

Tool combines impact driver with sliding dead-blow hammer. Used for any purpose for which ordinary impact driver used; tightening fasteners or driving starter holes for drill. Tool protects user from accidental injury and surrounding equipment from damage that might occur from ordinary arm-wielded hammer. Especially useful in underwater work.

Investigation of water hammer in Globochica HPP

International Nuclear Information System (INIS)

Bergant, Anton; Saveski, Vasil; Sijamhodjic, Esad

2004-01-01

Water hammer should be one of the key elements of the feasibility and design studies in order to ensure safe operation of the hydroelectric power plant (HPP). The main objective of this paper is to identify critical flow regimes which may cause unacceptable water hammer in a Francis turbine HPP. Water hammer is described by the set of hyperbolic partial differential equations, the continuity equation and the equation of motion. The method of characteristics is used for solving these equations. The water turbine is treated as a boundary condition within the method of characteristics. The paper concludes with water hammer analysis in Globocica HPP, Republic of Macedonia. The system tinder consideration is fitted with two 23 MW Francis turbines. There is a reasonable agreement between the computational is field test results. (Author)

An evaluation of water hammer in nuclear power plants

International Nuclear Information System (INIS)

Serkiz, A.

1983-01-01

Water hammer can occur as a result of to steam-void collapse, steam-driven slugs of water, pump startup into voided lines, and inadverdent closures of valves; the result is large hydraulic pressure loads. Since 1968, about 150 water hammer events have been reported in U.S. nuclear power plants; damage has been confined to pipe hangers and snubbers. The increase in reported water hammer events in the 1970s led to the designation of water hammer as Unresolved Safety Issue A-1 in 1979. Since the mid-1970s reported occurrences and their underlying phenomena have been studied, and corrective design and operational measures have been implemented. This paper presents the results of generic evaluations of water hammer occurrence and reported damage and sets forth technical findings. These findings indicate that good design practices and operational procedures can minimize the occurrence of water hammer

An analysis of the relationship between the linear hammer speed and the thrower applied forces during the hammer throw for male and female throwers.

Science.gov (United States)

Brice, Sara M; Ness, Kevin F; Rosemond, Doug

2011-09-01

The purpose of this study was to investigate the relationship between the cable force and linear hammer speed in the hammer throw and to identify how the magnitude and direction of the cable force affects the fluctuations in linear hammer speed. Five male (height: 1.88 +/- 0.06 m; body mass: 106.23 +/- 4.83 kg) and five female (height: 1.69 +/- 0.05 m; body mass: 101.60 +/- 20.92 kg) throwers participated and were required to perform 10 throws each. The hammer's linear velocity and the cable force and its tangential component were calculated via hammer head positional data. As expected, a strong correlation was observed between decreases in the linear hammer speed and decreases in the cable force (normalised for hammer weight). A strong correlation was also found to exist between the angle by which the cable force lags the radius of rotation at its maximum (when tangential force is at its most negative) and the size of the decreases in hammer speed. These findings indicate that the most effective way to minimise the effect of the negative tangential force is to reduce the size of the lag angle.

Validity and Reliability of the Cycleops Hammer Cycle Ergometer.

Science.gov (United States)

Lillo-Bevia, José R; Pallarés, Jesús G

2017-11-28

To validate the new drive indoor trainer Hammer designed by Cycleops®. Eleven cyclists performed 44 randomized and counterbalanced graded exercise tests (100-500W), at 70, 85 and 100 rev.min -1 cadences, in seated and standing positions, on 3 different Hammer units, while a scientific SRM system continuously recorded cadence and power output data. No significant differences were detected between the three Hammer devices and the SRM for any workload, cadence, or pedalling condition (P value between 1.00 and 0.350), except for some minor differences (P 0.03 and 0.04) found in the Hammer 1 at low workloads, and for Hammer 2 and 3 at high workloads, all in seated position. Strong ICCs were found between the power output values recorded by the Hammers and the SRM (≥0.996; P=0.001), independently from the cadence condition and seated position. Bland-Altman analysis revealed low Bias (-5.5-3.8) and low SD of Bias (2.5-5.3) for all testing conditions, except marginal values found for the Hammer 1 at high cadences and seated position (9.6±6.6). High absolute reliability values were detected for the 3 Hammers (150-500W; CVreliable device to drive and measure power output in cyclists, providing an alternative to larger and more expensive laboratory ergometers, and allowing cyclists to use their own bicycle.

Skalak's extended theory of water hammer

NARCIS (Netherlands)

Tijsseling, A.S.; Lambert, M.F.; Simpson, A.R.; Stephens, M.L.; Vítkovský, J.P.; Bergant, A.

2008-01-01

Half a century ago Richard Skalak [see T.C. Skalak, A dedication in memoriam of Dr. Richard Skalak, Annual Review of Biomedical Engineering 1 (1999) 1–18] published a paper with the title "An extension of the theory of water hammer" [R. Skalak, An Extension of the Theory of Water Hammer, PhD Thesis,

Development of a Piezoelectric Rotary Hammer Drill

Science.gov (United States)

Domm, Lukas N.

2011-01-01

The Piezoelectric Rotary Hammer Drill is designed to core through rock using a combination of rotation and high frequency hammering powered by a single piezoelectric actuator. It is designed as a low axial preload, low mass, and low power device for sample acquisition on future missions to extraterrestrial bodies. The purpose of this internship is to develop and test a prototype of the Piezoelectric Rotary Hammer Drill in order to verify the use of a horn with helical or angled cuts as a hammering and torque inducing mechanism. Through an iterative design process using models in ANSYS Finite Element software and a Mason's Equivalent Circuit model in MATLAB, a horn design was chosen for fabrication based on the predicted horn tip motion, electromechanical coupling, and neutral plane location. The design was then machined and a test bed assembled. The completed prototype has proven that a single piezoelectric actuator can be used to produce both rotation and hammering in a drill string through the use of a torque inducing horn. Final data results include bit rotation produced versus input power, and best drilling rate achieved with the prototype.

Automated Grid Monitoring for the LHCb Experiment Through HammerCloud

CERN Document Server

Dice, Bradley

2015-01-01

The HammerCloud system is used by CERN IT to monitor the status of the Worldwide LHC Computing Grid (WLCG). HammerCloud automatically submits jobs to WLCG computing resources, closely replicating the workflow of Grid users (e.g. physicists analyzing data). This allows computation nodes and storage resources to be monitored, software to be tested (somewhat like continuous integration), and new sites to be stress tested with a heavy job load before commissioning. The HammerCloud system has been in use for ATLAS and CMS experiments for about five years. This summer's work involved porting the HammerCloud suite of tools to the LHCb experiment. The HammerCloud software runs functional tests and provides data visualizations. HammerCloud's LHCb variant is written in Python, using the Django web framework and Ganga/DIRAC for job management.

Hammer's Monsters: A Screen Bestiary

OpenAIRE

Jones, Matthew; Chibnall, S.

2016-01-01

This public exhibition, housed in the DMU Heritage Centre, ran from October 2016 to October 2017. It displayed materials from the Hammer Script Archive held by the Cinema and Television History (CATH) Research Centre at DMU and provided a critical and historical commentary on these materials. Locating the archival objects and images within the industrial and creative history of the iconic Hammer Film Productions, the exhibition invited the public to reflect on the place of this studio within ...

Analysis of water hammer events in nuclear power plants

International Nuclear Information System (INIS)

Sato, Masahiro; Yanagi, Chihiro

1999-01-01

A water hammer issue in nuclear power plants was one of unresolved safety issues listed by the United States Nuclear Regulatory Commission and was regarded as resolved. But later on, the water hammer events are still experienced intermittently, while the number of the events is decreasing. We collected water hammer events of PWRs in Japan and the United States and relevant documents, analyzed them, and studied corrective actions taken by Japanese plants. As a result, it is confirmed that preventive measured in design, operation etc. have been already taken and that mitigation mechanisms against water hammer have also been considered. However, it is clarified that attention should be continuously paid to operation of valves and/or pumps, as the prevention of water hammer still relies on operation. (author)

Metal Forming With a Magnetomotive Hammer

Science.gov (United States)

2004-01-01

During the Apollo era Marshall Space Flight Center's engineers developed the Magnetomotive Hammer to remove distortions from Saturn V bulkhead gore segments. Using an intense magnetic field, the Hammer removed manufacturing distortions from rejected segments which otherwise would have been discarded at a cost of $30,000 each. Various automobile, ship and aircraft manufacturers adoped the technology for commercial use.

Downhole drilling hammer. Marteau de forage

Energy Technology Data Exchange (ETDEWEB)

Techy, M.

1987-07-28

This invention concerns a drilling hammer of the downhole type, comprising a tubular body fed by compressed air, a drilling cutter and a hammer piston set into movement inside an interior cylinder by a compressed air distribution mechanism alternately above and below the piston. The hammer includes a gas-oil injection device in the chamber above the piston and a mechanism for initiating the injection during the rising of the piston; the additional compression provokes the combustion of the gas-oil-air mixture, which hurls the piston towards the cutter. This type of apparatus permits an important reduction in costs of materials and of operation, and permits at the same time an increase in drilling power and a reduction in energy consumption. 8 figs.

Effect of hammer mass on upper extremity joint moments.

Science.gov (United States)

Balendra, Nilanthy; Langenderfer, Joseph E

2017-04-01

This study used an OpenSim inverse-dynamics musculoskeletal model scaled to subject-specific anthropometrics to calculate three-dimensional intersegmental moments at the shoulder, elbow and wrist while 10 subjects used 1 and 2 lb hammers to drive nails. Motion data were collected via an optoelectronic system and the interaction of the hammer with nails was recorded with a force plate. The larger hammer caused substantial increases (50-150%) in moments, although increases differed by joint, anatomical component, and significance of the effect. Moment increases were greater in cocking and strike/follow-through phases as opposed to swinging and may indicate greater potential for injury. Compared to shoulder, absolute increases in peak moments were smaller for elbow and wrist, but there was a trend toward larger relative increases for distal joints. Shoulder rotation, elbow varus-valgus and pronation-supination, and wrist radial-ulnar deviation and rotation demonstrated large relative moment increases. Trial and phase durations were greater for the larger hammer. Changes in moments and timing indicate greater loads on musculoskeletal tissues for an extended period with the larger hammer. Additionally, greater variability in timing with the larger hammer, particularly for cocking phase, suggests differences in control of the motion. Increased relative moments for distal joints may be particularly important for understanding disorders of the elbow and wrist associated with hammer use. Copyright © 2016 Elsevier Ltd. All rights reserved.

Characteristics of laminar MHD fluid hammer in pipe

International Nuclear Information System (INIS)

Huang, Z.Y.; Liu, Y.J.

2016-01-01

As gradually wide applications of MHD fluid, transportation as well as control with pumps and valves is unavoidable, which induces MHD fluid hammer. The paper attempts to combine MHD effect and fluid hammer effect and to investigate the characteristics of laminar MHD fluid hammer. A non-dimensional fluid hammer model, based on Navier–Stocks equations, coupling with Lorentz force is numerically solved in a reservoir–pipe–valve system with uniform external magnetic field. The MHD effect is represented by the interaction number which associates with the conductivity of the MHD fluid as well as the external magnetic field and can be interpreted as the ratio of Lorentz force to Joukowsky force. The transient numerical results of pressure head, average velocity, wall shear stress, velocity profiles and shear stress profiles are provided. The additional MHD effect hinders fluid motion, weakens wave front and homogenizes velocity profiles, contributing to obvious attenuation of oscillation, strengthened line packing and weakened Richardson annular effect. Studying the characteristics of MHD laminar fluid hammer theoretically supplements the gap of knowledge of rapid-transient MHD flow and technically provides beneficial information for MHD pipeline system designers to better devise MHD systems. - Highlights: • Characteristics of laminar MHD fluid hammer are discussed by simulation. • MHD effect has significant influence on attenuation of wave. • MHD effect strengthens line packing. • MHD effect inhibits Richardson annular effect.

Condensation driven water hammer studies for feed water distribution pipe

International Nuclear Information System (INIS)

Savolainen, S.; Katajala, S.; Elsing, B.; Nurkkala, P.; Longvinov, S.A.; Trunov, N.B.; Sitnik, Yu.K.

1997-01-01

Special T-shaped feedwater distribution pipes were installed in steam generators at the Loviisa (Finland) and Rovno (Russia) nuclear power plants. The new shape was tested in an extensive testing programme. Since the tubes frequently suffer from corrosion damage, large-scale water hammer experiments were performed on a model facility in 1996. The main objectives of the water hammer experiments were to find out the prevailing parameters leading to water hammers, as well as the sensitivity of hammering to boundary conditions. A water hammer may occur when the mass flow rate into the steam generator exceeds 6 kg/s and the temperature difference between steam generator and feedwater exceeds 100 degC. Visual experiments and stress analyses of the pipe were also carried out. The weakest part, the T-joint, may hold against such water hammers only for a limited time of the order of few minutes. (M.D.)

Optimization analysis of swing check valve closing induced water hammer

International Nuclear Information System (INIS)

Han Wenwei; Han Weishi; Guo Qing; Wang Xin; Liu Chunyu

2014-01-01

A mathematical-physics model of double pump parallel feed system was constructed. The water hammer was precisely calculated, which was formed in the closing process of swing check valve. And a systematic analysis was carried out to determine the influence of the torques from both valve plate and damping torsion spring on the valve closing induced water hammer. The results show that the swing check valve would distinctly produce the water hammer during the closing procedure in the double pump parallel feed water system. The torques of the valve plate can partly reduce the water hammer effect, and implying appropriate materials of valve plate and appropriate spring can effectively relieve the harm of water hammer. (authors)

Value-impact analysis for USI A-1, water hammer

International Nuclear Information System (INIS)

Serkiz, A.W.

1983-05-01

The Unresolved Safety Issue (USI) A-1 deals with safety concerns related to water hammer occurrence in nucler power plants. The staff's concerns were prompted by the increasing frequency of water hammer occurrence in the mid-1970's as new plants were coming on line, and in particular, by the feedwater line rupture at Indian Point No. 2 in 1973 (attributed to water hammer induced by steam-void collapse). Principal concerns were: the potential for inadequate dynamic load design, disablement of safety systems, and the release of radioactivity. The staff's views were set forth in NUREG-0582 and water hammer was designated a USI in 1979

Variable Step Integration Coupled with the Method of Characteristics Solution for Water-Hammer Analysis, A Case Study

Science.gov (United States)

Turpin, Jason B.

2004-01-01

One-dimensional water-hammer modeling involves the solution of two coupled non-linear hyperbolic partial differential equations (PDEs). These equations result from applying the principles of conservation of mass and momentum to flow through a pipe, and usually the assumption that the speed at which pressure waves propagate through the pipe is constant. In order to solve these equations for the interested quantities (i.e. pressures and flow rates), they must first be converted to a system of ordinary differential equations (ODEs) by either approximating the spatial derivative terms with numerical techniques or using the Method of Characteristics (MOC). The MOC approach is ideal in that no numerical approximation errors are introduced in converting the original system of PDEs into an equivalent system of ODEs. Unfortunately this resulting system of ODEs is bound by a time step constraint so that when integrating the equations the solution can only be obtained at fixed time intervals. If the fluid system to be modeled also contains dynamic components (i.e. components that are best modeled by a system of ODEs), it may be necessary to take extremely small time steps during certain points of the model simulation in order to achieve stability and/or accuracy in the solution. Coupled together, the fixed time step constraint invoked by the MOC, and the occasional need for extremely small time steps in order to obtain stability and/or accuracy, can greatly increase simulation run times. As one solution to this problem, a method for combining variable step integration (VSI) algorithms with the MOC was developed for modeling water-hammer in systems with highly dynamic components. A case study is presented in which reverse flow through a dual-flapper check valve introduces a water-hammer event. The predicted pressure responses upstream of the check-valve are compared with test data.

Long-term follow-up of hypothenar hammer syndrome: a series of 47 patients.

Science.gov (United States)

Marie, Isabelle; Hervé, Fabien; Primard, Etienne; Cailleux, Nicole; Levesque, Hervé

2007-11-01

Hypothenar hammer syndrome (HHS) is an uncommon form of secondary Raynaud phenomenon, occurring mainly in subjects who use the hypothenar part of the hand as a hammer; the hook of the hamate strikes the superficial palmar branch of the ulnar artery in the Guyon space, leading to occlusion and/or aneurysm of the ulnar artery. In patients with HHS, such injuries of the palmar ulnar artery may lead to severe vascular insufficiency in the hand with occlusion of digital artery. To date, only a few series have analyzed the long-term outcome of patients with HHS. This prompted us to conduct the current retrospective study to 1) evaluate the prevalence of HHS in patients with Raynaud phenomenon and 2) assess the short-term and long-term outcome in patients with HHS. From 1990 to 2006, 4148 consecutive patients were referred to the Department of Internal Medicine at the University of Rouen medical center for evaluation of Raynaud phenomenon using nailfold capillaroscopy. HHS was diagnosed in 47 of these 4148 patients (1.13% of cases).Forty-three patients (91.5%) had occupational exposure to repetitive palmar trauma. The more common occupations were factory worker (21.3%), mason (12.8%), carpenter (10.6%), and metal worker (10.6%); the mean duration of occupational exposure to repetitive palmar trauma at HHS diagnosis was 21 years. One patient (2.1%) had recreational exposure (aikido training) to repetitive trauma of the palmar ulnar artery, and 3 other patients (6.4%) developed HHS related to a single direct injury to the hypothenar area. Clinical manifestations were more often unilateral (87.2%) involving the dominant hand (93%). HHS complications included digital ischemic symptoms (ischemia: n = 21, necrosis: n = 20) and irritation of the sensory branch of the ulnar nerve (n = 11). In HHS patients, angiography demonstrated occlusion of the ulnar artery in the area of the Guyon space (59.6%), aneurysm of the ulnar artery in the area of the Guyon space (40.4%), and embolic

Two-phase water hammer in nuclear power plants

International Nuclear Information System (INIS)

Kim, J.H.

1987-01-01

Water hammer events keep recurring in nuclear power plants. In the mid-1970s, water hammer was designated to be an unresolved safety issue (USI A-1) due to its high frequency of occurrence and the severity of the attendant damages. Between 1969 and 1981, a significant number of water hammer incidents (more than 12 events per year) involving BWRs and PWRs have been reported and evaluated. After intensive evaluations of the events, in late 1983, the U.S. Nuclear Regulatory Commission staff concluded that water hammer was not a serious contributor to the degradation of plant safety and it has been taken off the list of the unresolved safety issues. The frequency decreased to around 11 events per year between 1981 and 1985. Nevertheless, 11 events per year are still unacceptable high, especially in light of the financial losses caused by most events. Some events are not required to be reported. The number of the unreported events are estimated to be five to ten times as many as the reported events. The implication is that water hammer in nuclear power plants still needs attention and is a problem that has not been fundamentally resolved

Condensation induced water hammer in steam supply system

International Nuclear Information System (INIS)

Andrews, P.B.; Antaki, G.A.; Rawls, G.B.; Gutierrez, B.J.

1995-01-01

The accidental mixing of steam and water usually leads to condensation induced water hammer. This phenomenon is not uncommon in the power and process industries, and is of particular concern due to the high energies which accompany steam transients. The paper discusses the conditions which lead to a recent condensation induced water hammer in a 150 psig steam supply header. The ensuing structural damage, inspection and repairs are described. Finally, a list of design, maintenance and operational cautions are presented to help minimize the potential for condensation induced water hammer in steam lines

Condensation induced water hammer in steam supply system

International Nuclear Information System (INIS)

Andrews, P.B.; Antaki, G.A.; Rawls, G.B.; Gutierrez, B.J.

1995-01-01

The accidental mixing of steam and water usually leads to condensation induced water hammer. THis phenomenon is not uncommon in the power and process industries, and is of particular concern due to the high energies which accompany steam transients. The paper discusses the conditions which lead to a recent condensation induced water hammer in a 150 psig steam supply header. The insuing structural damage, inspection and repairs are described. Finally, a list of design cautions are presented to help minimize the potential for condensation induced water hammer in steam lines

Electromagnetic hammer removes weld distortions from aluminum tanks

Science.gov (United States)

Schwinghamer, R. J.

1965-01-01

Distortions around weld areas on sheet-aluminum tanks and other structures are removed with a portable electromagnetic hammer. The hammer incorporates a coil that generates a controlled high-energy pulsed magnetic field over localized areas on the metal surface.

Vibration and recoil control of pneumatic hammers. [by air flow pressure regulation

Science.gov (United States)

Constantinescu, I. N.; Darabont, A. V.

1974-01-01

Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.

Preventive measures of water hammer in the design stage of mine drainage system

International Nuclear Information System (INIS)

Wu Dongyan

2012-01-01

The mechanisms and types of water hammer accident in mine drainage system are introduced. Through calculating water hammer pressure head of pump-failure water hammer, the extent of the harm caused by water hammer can be displayed visually, therefore,the preventive measures to be taken in the design stage are put forward in order to reduce water hammer accident. (author)

Voice Coil Percussive Mechanism Concept for Hammer Drill

Science.gov (United States)

Okon, Avi

2009-01-01

A hammer drill design of a voice coil linear actuator, spring, linear bearings, and a hammer head was proposed. The voice coil actuator moves the hammer head to produce impact to the end of the drill bit. The spring is used to store energy on the retraction and to capture the rebound energy after each impact for use in the next impact. The maximum actuator stroke is 20 mm with the hammer mass being 200 grams. This unit can create impact energy of 0.4 J with 0.8 J being the maximum. This mechanism is less complex than previous devices meant for the same task, so it has less mass and less volume. Its impact rate and energy are easily tunable without changing major hardware components. The drill can be driven by two half-bridges. Heat is removed from the voice coil via CO2 conduction.

Adaptation of HAMMER computer code to CYBER 170/750 computer

International Nuclear Information System (INIS)

Pinheiro, A.M.B.S.; Nair, R.P.K.

1982-01-01

The adaptation of HAMMER computer code to CYBER 170/750 computer is presented. The HAMMER code calculates cell parameters by multigroup transport theory and reactor parameters by few group diffusion theory. The auxiliary programs, the carried out modifications and the use of HAMMER system adapted to CYBER 170/750 computer are described. (M.C.K.) [pt

Simulation of water hammer experiments using RELAP5 code

International Nuclear Information System (INIS)

Kaliatka, A.; Vaisnoras, M.

2005-01-01

The rapid closing or opening of a valve causes pressure transients in pipelines. The fast deceleration of the liquid results in high pressure surges upstream the valve, thus the kinetic energy is transformed into the potential energy, which leads to the temporary pressure increases. This phenomenon is called water hammer. The intensity of water hammer effects will depend upon the rate of change in the velocity or momentum. Generally water hammer can occur in any thermal-hydraulic systems and it is extremely dangerous for the thermal-hydraulic system since, if the pressure induced exceeds the pressure range of a pipe given by the manufacturer, it can lead to the failure of the pipeline integrity. Due to its potential for damage of pipes, water hammer has been a subject of study since the middle of the nineteenth century. Many theoretical and experimental investigations were performed. The experimental investigation of the water hammer tests performed at Fraunhofer Institute for Environmental, Safety and Energy Technology (UMSICHT) [1] and Cold Water Hammer experiment performed by Forschungszentrum Rossendorf (CWHTF) [2] should be mentioned. The UMSICHT facility in Oberhausen was modified in order to simulate a piping system and associated supports that are typical for a nuclear power plant [3]. The Cold water hammer experiment is interesting and instructive because it covers a wide spectrum of particularities. One of them is sub-cooled water interaction with condensing steam at the closed end of the vertical pipe at room temperature and corresponding saturation pressure [4]. In the paper, the capabilities of RELAP5 code to correctly represent the water hammer phenomenon are presented. Paper presents the comparison of RELAP5 calculated and measured at UMSICHT and CWHTF test facilities pressure transient values after the fast closure (opening) of valves. The analyses of rarefaction wave travels inside the pipe and condensation of vapour bubbles in the liquid column

Simulating water hammer with corrective smoothed particle method

NARCIS (Netherlands)

Hou, Q.; Kruisbrink, A.C.H.; Tijsseling, A.S.; Keramat, A.

2012-01-01

The corrective smoothed particle method (CSPM) is used to simulate water hammer. The spatial derivatives in the water-hammer equations are approximated by a corrective kernel estimate. For the temporal derivatives, the Euler-forward time integration algorithm is employed. The CSPM results are in

Experimental investigation of the piano hammer-string interaction.

Science.gov (United States)

Birkett, Stephen

2013-04-01

Experimental techniques for investigating the piano hammer-string interaction are described. It is argued that the accuracy, consistency, and scope of conclusions of previous studies can be compromised by limitations of the conventional methods relating to key inputs; physical distortion; numerical distortion, particularly when differentiation or integration of measured signals is used to derive primary response variables; contact identification; and synchronization issues. These problems are discussed, and experimental methods that have been devised to avoid them are described and illustrated by detailed results from a study of the hammer-string interaction in a vertical piano. High resolution displacements are obtained directly by non-contact high-speed imaging and quantitative motion tracking. The attention focused on achieving very accurate and consistent temporal and spatial alignment, including the objective procedure used for contact identification, allows meaningful comparisons of responses from separate tests. String motion at the strike point and on each side of it, as well as hammer motion, is obtained for eight dynamic levels from 1.06 to 2.98 m/s impact velocity. Detailed observations of the force-compression behavior of the hammer interacting with real strings are presented. The direct effects of hammer shank deflection and agraffe string pulses on the interaction are also highlighted.

Reconstruction of piano hammer force from string velocity.

Science.gov (United States)

Chaigne, Antoine

2016-11-01

A method is presented for reconstructing piano hammer forces through appropriate filtering of the measured string velocity. The filter design is based on the analysis of the pulses generated by the hammer blow and propagating along the string. In the five lowest octaves, the hammer force is reconstructed by considering two waves only: the incoming wave from the hammer and its first reflection at the front end. For the higher notes, four- or eight-wave schemes must be considered. The theory is validated on simulated string velocities by comparing imposed and reconstructed forces. The simulations are based on a nonlinear damped stiff string model previously developed by Chabassier, Chaigne, and Joly [J. Acoust. Soc. Am. 134(1), 648-665 (2013)]. The influence of absorption, dispersion, and amplitude of the string waves on the quality of the reconstruction is discussed. Finally, the method is applied to real piano strings. The measured string velocity is compared to the simulated velocity excited by the reconstructed force, showing a high degree of accuracy. A number of simulations are compared to simulated strings excited by a force derived from measurements of mass and acceleration of the hammer head. One application to an historic piano is also presented.

Condensation induced water hammer. Overview and own experiments

International Nuclear Information System (INIS)

Dirndorfer, Stefan; Doerfler, Michael; Kulisch, Helmut; Malcherek, Andreas

2012-01-01

A condensation induced water hammer is a severe effect that has caused damages and even fatalities worldwide. This effect is not limited to the nuclear industry only. Generally it can occur in every pipe that contains water and steam (two-phase-flow). To date many experiments were executed to study this phenomenon and to validate existing water hammer codes. But theoretically versus measured results show a very high degree of deviation. Information about those experiments was obtained by literature review. This information is presented additionally to a test facility, which has been developed in order to generate water hammers. The test device is introduced in this paper and its main functions are briefly explained. In contrast to other experiments, water hammers at the UniBw are performed under controlled conditions. Air in water is a disruptive parameter that causes vigorous deviations between the theoretical system code and the experimental measurements. As in the test device presented in this paper, deionised water without air is used, this effect is ruled out. Furthermore the inception of a water hammer is controlled by a scientist. The experimental results will characterise the dynamic response of the test device as a function of system pressure, filling degree and sub-cooling. (orig.)

Condensation-induced water hammer - overview and own experiments

International Nuclear Information System (INIS)

Dirndorfer, S.; Doerfler, M.; Kulisch, H.; Malcherek, A.

2011-01-01

A condensation induced water hammer is a severe effect that has caused damages and even fatalities worldwide. This effect is not limited to the nuclear industry only. Generally it can occur in every pipe that contains water and steam (two-phase-flow). To date many experiments were executed to study this effect and to validate existing water hammer codes. But theoretically versus measured results show a very high degree of deviation. Information about those experiments was obtained by literature review. This information is presented additionally to a test facility, which has been developed in order to generate water hammers. The test device is introduced in this paper and its main functions are briefly explained. In contrast to other experiments, water hammers at the UniBw are performed under controlled conditions. Air in water is a disruptive parameter that causes vigorous deviations between the theoretical system code and the experimental measurements. As in the test device presented in this paper, deionised water without air is used, this effect is ruled out. Furthermore the inception of a water hammer is controlled by a scientist. The experimental results will characterise the dynamic response of the test device as a function of system pressure, filling degree and sub-cooling. (author)

Screening reactor steam/water piping systems for water hammer

International Nuclear Information System (INIS)

Griffith, P.

1997-09-01

A steam/water system possessing a certain combination of thermal, hydraulic and operational states, can, in certain geometries, lead to a steam bubble collapse induced water hammer. These states, operations, and geometries are identified. A procedure that can be used for identifying whether an unbuilt reactor system is prone to water hammer is proposed. For the most common water hammer, steam bubble collapse induced water hammer, six conditions must be met in order for one to occur. These are: (1) the pipe must be almost horizontal; (2) the subcooling must be greater than 20 C; (3) the L/D must be greater than 24; (4) the velocity must be low enough so that the pipe does not run full, i.e., the Froude number must be less than one; (5) there should be void nearby; (6) the pressure must be high enough so that significant damage occurs, that is the pressure should be above 10 atmospheres. Recommendations on how to avoid this kind of water hammer in both the design and the operation of the reactor system are made

Enhancing down-the-hole air hammer capacity in directional drilling

Science.gov (United States)

Klishin, V. I.; Timonin, V. V.; Kokoulin, D. I.; Alekseev, S. E.; Kubanychbek, B.

2017-09-01

The authors discuss the issue connected with drilling trajectory deviation and present the technique of rotary-percussion drilling with a down-the-hole air hammer. The article describes pilot testing of the air hammer drill PNB76 in Berezovskaya Mine. The ways of improving the air hammer drill are identified, and the basic diagram and R&D test data are given.

Comparative evaluation of recent water hammer events in light water reactors

International Nuclear Information System (INIS)

House, R.K.; Sursock, J.P.; Kim, J.H.

1987-01-01

Water hammer events that occurred in commercial U.S. light water reactors in the five-year period from 1981 to 1985 were surveyed, and a preliminary evaluation of the events was conducted. The information developed supplements a previous study which evaluated water hammer events in the twelve-year period from 1969 to 1981. The current study of water hammer events in the 1980's confirms that the rate of events remains relatively constant (less than 0.25 events per plant year) in both PWRs and BWRs. Although water hammer events are not normally considered a safety issue, the economic impact of the events on plant operations can be significant. One particular severe water hammer event is estimated to have cost the plant owner $10 million for repair and evaluation alone. A variety of key characteristics of the recent water hammer events are summarized to establish a basis for further study of preventative methods

Water hammer caused by rapid steam production in a severe accident in a light water reactor

International Nuclear Information System (INIS)

Inasaka, Fujio; Adachi, Masaki; Murata, Hiroyuki; Aya, Izuo

2007-01-01

We conducted the experimental studies on the water hammer caused by striking of a water mass pushed up by a rapidly growing steam bubble, using a cylindrical model containment vessel of 0.4286 m in diameter. In the experiments, a rapid gas growth was simulated by injecting high-pressure steam into a water pool. It was clarified that coherency of the water mass movement and its water hammer caused by the condensable gas production considerably decreased in comparison with the case of the non-condensable gas production because the rising velocity of the water mass was suppressed due to the steam bubble condensation. On the basis of the data, experimental correlations for estimating the water hammer on the structures in the containment vessel were proposed. (author)

A new production technique for wear resistant ring-hammers

Directory of Open Access Journals (Sweden)

Li Shifeng

2011-11-01

Full Text Available Based on a great number of laboratory experiments, a new technique has been developed for producing wear resistant ring-hammers. In this technology, lost foam casting with iron sand was combined to make mold; a special alloy was used to inoculate the molten steel, and proper heat treatment was used to further improve mechanical properties of wear resistant ring-hammers. The influence of this new production technology on the microstructure and mechanical properties of wear resistant ring-hammers was studied. Results show that iron sand molding, having the inherent characteristic of sand molding, changes the type of metallic compounds, refines crystal grains and increases the fineness of microstructure. Practical experience verified that the properties of the ring-hammers produced with this new technique are as follows: tensile strength (Rm 720 MPa, impact toughness (ak > 210 J•cm-2 and hardness > 200 HB. After water quenching from 1,080℃ (holding for 4 h and tempering at 320℃ for 3 h, the best wear resistance is obtained, and the wear resistance is 1.6 times higher than that of common high manganese ring-hammers.

Pressurized water-reactor feedwater piping response to water hammer

International Nuclear Information System (INIS)

Arthur, D.

1978-03-01

The nuclear power industry is interested in steam-generator water hammer because it has damaged the piping and components at pressurized water reactors (PWRs). Water hammer arises when rapid steam condensation in the steam-generator feedwater inlet of a PWR causes depressurization, water-slug acceleration, and slug impact at the nearest pipe elbow. The resulting pressure pulse causes the pipe system to shake, sometimes violently. The objective of this study is to evaluate the potential structural effects of steam-generator water hammer on feedwater piping. This was accomplished by finite-element computation of the response of two sections of a typical feedwater pipe system to four representative water-hammer pulses. All four pulses produced high shear and bending stresses in both sections of pipe. Maximum calculated pipe stresses varied because the sections had different characteristics and were sensitive to boundary-condition modeling

Goal Translation for a Hammer for Coq (Extended Abstract

Directory of Open Access Journals (Sweden)

Łukasz Czajka

2016-06-01

Full Text Available Hammers are tools that provide general purpose automation for formal proof assistants. Despite the gaining popularity of the more advanced versions of type theory, there are no hammers for such systems. We present an extension of the various hammer components to type theory: (i a translation of a significant part of the Coq logic into the format of automated proof systems; (ii a proof reconstruction mechanism based on a Ben-Yelles-type algorithm combined with limited rewriting, congruence closure and a first-order generalization of the left rules of Dyckhoff's system LJT.

Avoiding steam-bubble-collapse-induced water hammers in piping systems

International Nuclear Information System (INIS)

Chou, Y.; Griffith, P.

1989-10-01

In terms of the frequency of occurrence, steam bubble collapse in subcooled water is the dominant initiating mechanism for water hammer events in nuclear power plants. Water hammer due to steam bubble collapse occurs when water slug forms in stratified horizontal flow, or when steam bubble is trapped at the end of the pipe. These types of water hammer events have been studied experimentally and analytically in order to develop stability maps showing those combinations of filling velocities and liquid subcooling that cause water hammer and those which don't. In developing the stability maps, experiments with different piping orientations were performed in a low pressure laboratory apparatus. Details of these experiments are described, including piping arrangement, test procedures, and test results. Visual tests using a transparent Lexan pipe are also performed to study the flow regimes accompanying the water hammer events. All analytical models were tested by comparison with the corresponding experimental results. Based on these models, and step-by-step approach for each flow geometry is presented for plant designers and engineers to follow in avoiding water hammer induced by steam bubble collapse when admitting cold water into pipes filled with steam. 37 refs., 54 figs., 2 tabs

Water hammer characteristics of integral pressurized water reactor primary loop

International Nuclear Information System (INIS)

Zuo, Qiaolin; Qiu, Suizheng; Lu, Wei; Tian, Wenxi; Su, Guanghui; Xiao, Zejun

2013-01-01

Highlights: • Water hammer models developed for IPWR primary loop using MOC. • Good agreement between the developed code and the experiment. • The good agreement between WAHAP and Flowmaster can validate the equations in WAHAP. • The primary loop of IPWR suffers from slight water hammer impact. -- Abstract: The present work discussed the single-phase water hammer phenomenon, which was caused by the four-pump-alternate startup in an integral pressurized water reactor (IPWR). A new code named water hammer program (WAHAP) was developed independently based on the method of characteristic to simulate hydraulic transients in the primary system of IPWR and its components such as reactor core, once-through steam generators (OTSG), the main coolant pumps and so on. Experimental validation for the correctness of the equations and models in WAHAP was carried out and the models fit the experimental data well. Some important variables were monitored including transient volume flow rates, opening angle of valve disc and pressure drop in valves. The water hammer commercial software Flowmaster V7 was also employed to compare with WAHAP and the good agreement can validate the equations in WAHAP. The transient results indicated that the primary loop of IPWR suffers from slight water hammer impact under pump switching conditions

Water hammer characteristics of integral pressurized water reactor primary loop

Energy Technology Data Exchange (ETDEWEB)

Zuo, Qiaolin [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shanxi 710049 (China); Qiu, Suizheng, E-mail: szqiu@mail.xjtu.edu.cn [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shanxi 710049 (China); Lu, Wei; Tian, Wenxi; Su, Guanghui [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, Shanxi 710049 (China); Xiao, Zejun [Nuclear Power Institute of China, Chengdu, Sichuan 610041 (China)

2013-08-15

Highlights: • Water hammer models developed for IPWR primary loop using MOC. • Good agreement between the developed code and the experiment. • The good agreement between WAHAP and Flowmaster can validate the equations in WAHAP. • The primary loop of IPWR suffers from slight water hammer impact. -- Abstract: The present work discussed the single-phase water hammer phenomenon, which was caused by the four-pump-alternate startup in an integral pressurized water reactor (IPWR). A new code named water hammer program (WAHAP) was developed independently based on the method of characteristic to simulate hydraulic transients in the primary system of IPWR and its components such as reactor core, once-through steam generators (OTSG), the main coolant pumps and so on. Experimental validation for the correctness of the equations and models in WAHAP was carried out and the models fit the experimental data well. Some important variables were monitored including transient volume flow rates, opening angle of valve disc and pressure drop in valves. The water hammer commercial software Flowmaster V7 was also employed to compare with WAHAP and the good agreement can validate the equations in WAHAP. The transient results indicated that the primary loop of IPWR suffers from slight water hammer impact under pump switching conditions.

A wireless sensor system for a biofeedback training of hammer throwers.

Science.gov (United States)

Wang, Ye; Wan, Bingjun; Li, Hua; Shan, Gongbing

2016-01-01

Hammer-throw has a long-standing history in track and field, but unlike some other sports events, men's hammer throw has not seen a new world record since 1986. One of the possible reasons for this stagnation could be the lack of real-time biomechanical feedback training. In this study, we proposed to establish scientifically described training targets and routes, which in turn required tools that could measure and quantify characteristics of an effective hammer-throw. Towards this goal, we have developed a real-time biomechanical feedback device-a wireless sensor system-to help the training of hammer-throw. The system includes two sensors-an infrared proximity sensor for tracing the hip vertical movement and a load cell for recording the wire tension during a hammer-throw. The system uses XBees for data transmission and an Arduino processor for data processing and system control. The results revealed that the wire tension measurement could supply sufficient key features for coaches to analyze hammer-throw and give real-time feedback for improving training efficiency.

The Velvet Hammer

Science.gov (United States)

Henderson, Nancy

2008-01-01

This article features the life of Louise Underwood, an advocate for people with disabilities and their families. Underwood is known for her nickname "The Velvet Hammer" because of her relentless attitude when it comes to advocating for people with disabilities. Many times she has pulled strings to halt legislation that would have…

Overview of Prevention for Water Hammer by Check Valve Action in Nuclear Reactor

International Nuclear Information System (INIS)

Kim, Dayong; Yoon, Hyungi; Seo, Kyoungwoo; Kim, Seonhoon

2016-01-01

Water hammer can cause serious damage to pumping system and unexpected system pressure rise in the pipeline. In nuclear reactor, water hammer can influence on the integrity of safety related system. Water hammer in nuclear reactor have been caused by voiding in normally water-filled lines, steam condensation line containing both steam and water, as well as by rapid check valve action. Therefore, this study focuses on the water hammer by check valve among the sources of water hammer occurrence and suggests proper methodology for check valve type selection against water hammer. This study focuses on the water hammer by check valve action among the sources of water hammer occurrence and suggests proper methodology for check valve type selection against water hammer. If the inadvertent pump trip or pipe rupture in high velocity and pressure pipe is predicted, the fast response check valve such as tiled disc, dual disc and nozzle check valve should be installed in the system. If the inadvertent pump trip or pipe rupture in very high velocity and pressure pipe and excessively large revered flow velocity are predicted, the very slowly closing check valve such as controlled closure check valve should be installed in the system

Overview of Prevention for Water Hammer by Check Valve Action in Nuclear Reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Dayong; Yoon, Hyungi; Seo, Kyoungwoo; Kim, Seonhoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Water hammer can cause serious damage to pumping system and unexpected system pressure rise in the pipeline. In nuclear reactor, water hammer can influence on the integrity of safety related system. Water hammer in nuclear reactor have been caused by voiding in normally water-filled lines, steam condensation line containing both steam and water, as well as by rapid check valve action. Therefore, this study focuses on the water hammer by check valve among the sources of water hammer occurrence and suggests proper methodology for check valve type selection against water hammer. This study focuses on the water hammer by check valve action among the sources of water hammer occurrence and suggests proper methodology for check valve type selection against water hammer. If the inadvertent pump trip or pipe rupture in high velocity and pressure pipe is predicted, the fast response check valve such as tiled disc, dual disc and nozzle check valve should be installed in the system. If the inadvertent pump trip or pipe rupture in very high velocity and pressure pipe and excessively large revered flow velocity are predicted, the very slowly closing check valve such as controlled closure check valve should be installed in the system.

A body is not a metaphor: Barbara Hammer's X-ray vision.

Science.gov (United States)

Osterweil, Ara

2010-01-01

This article examines three films by legendary experimental filmmaker Barbara Hammer that deal with the sick, aging, or dying body: Optic Nerve (1985), Sanctus (1990), and A Horse is Not a Metaphor (2008). By analyzing films that do not explicitly confront sexual identity, this article questions the continuing usefulness of the designation "lesbian filmmaker" when considering Hammer's diverse body of work. Tracing the "double consciousness" through which Hammer approaches the body and its construction in patriarchy-particularly in the discourse of medicine-this article argues that Hammer's is a thoroughly corporeal, but not exclusively lesbian, cinema.

The Hammer-and-Nail Phenomenon in Mathematics Education

Science.gov (United States)

Lim, Kien H.

2012-01-01

This paper uses the hammer-and-nail metaphor to highlight the rigidity and impulsiveness that can be found in student mathematical behaviour. The hammer-and-nail phenomenon can be attributed to two plausible causes: (1) the way the human mind works; and (2) the way mathematics is traditionally taught in school. In this paper, the following aspects…

Regulatory analysis for USI A-1, Water Hammer

International Nuclear Information System (INIS)

Serkiz, A.W.

1984-03-01

This is the staff's regulatory analysis dealing with the resolution of the Unresolved Safety Issue A-1, Water Hammer. This report contains the value-impact analysis for this issue, public comments received, and staff response, or action taken, in response to those comments. The staff's technical findings regarding water hammer in nuclear power plants are contained in NUREG-0927

[Hand-arm vibration syndrome in caisson miners].

Science.gov (United States)

Kákosy, T; Németh, L; Hazay, B; Posgay, M; Diner, J

1997-07-06

Authors examined 43 caisson-miners with symptoms of the upper extremities because of suspicion of hand-arm vibration syndrome. Also vibration measurements were performed on the pneumatic hammer used by the workers. The acceleration of the vibration exceeded 2.5-3.5 times the maximum allowable level according to the ISO 5349. Symptoms and signs of hand-arm vibration syndrome were found in 39 cases (90.7%). The vascular, peripheral neurological and locomotor system of the upper extremities were affected in similar frequency: 54.8; 51.6 and 51.2%, respectively. The most common angiological alteration was the Raynaud's phenomenon. Neurologically predominated the tunnel syndromes. Among the osteoarticular lesions the degenerative phenomena were the most frequent. In most cases more than one pathological alteration occurred. Fatigue fracture of the spinous process of vertebra D. I. appeared in one single case, degenerative changes of cervical spine in 34 patients (79.1%). The very common occurrence of the locomotor alterations and tunnel syndromes respectively can be explained probably also by the high physical stress required by this profession. The detailed examination of the locomotor system is very important by the periodical screening of the caisson-miners.

Analysis and prevention of water hammer for the emergency core cooling system

International Nuclear Information System (INIS)

Zhao Jun

2008-01-01

Emergency core cooling system (ECCS) is an engineered safety feature of nuclear power plant. If the water hammer happens during ECCS injection, the piping system may be broken. It will cause loss of ECC system and affect the safety of reactor core. Based on the functions and characteristics of ECCS and the theory of water hammer, the paper analyzed the potential risk of water hammer in ECCS in Qinshan III, and proposed modifications to prevent the water-hammer damage during ECCS injection. (authors)

Water hammer conservatisms

International Nuclear Information System (INIS)

Uffer, R.A.

1993-01-01

Calculated water hammer forces often contain excessive conservatisms resulting in unrealistic damage predictions. This is especially true for void filling and column separation scenarios. Pressure rise times can be as important as pressure amplitudes. Forces based on in situ test data can also contain excessive conservatisms. This paper discusses the causes of such conservatisms and means of minimizing them

Water hammer and cavitational hammer in process plant pipe systems

International Nuclear Information System (INIS)

Dudlik, A.; Schoenfeld, S.B.H.; Hagemann, O.; Fahlenkamp, H.

2003-01-01

Fast acting valves are often applied for quick safety shut-down of pipelines for liquids and gases in the chemical and petrochemical industry as well as in power plants and state water supplies. The fast deceleration of the liquid leads to water hammer upstream the valve and to cavitational hammer downstream the fast closing valve. The valve characteristics given by manufacturers are usually measured at steady state flow conditions of the liquid. In comparison, the dynamic characteristics depend on the initial liquid velocity, valve closing velocity, the absolute pipe pressure and the pipe geometry. Fraunhofer UMSICHT conducts various test series examining valve dynamic characteristics in order of the dynamic analysis of pressure surges in fast closing processes. Therefore a test rig is used which consists of two pipelines of DN 50 and DN 100 with an approximate length of 230 m each. In this paper the results of performed pressure surge experiments with fast closing and opening valves will be compared to calculations of commercial software programs such as MONA, FLOWMASTER 2. Thus the calculation software for water supply, power plants oil and gas and chemical industry can be permanently improved. (orig.)

Hammering Does Not Fit Fitts' Law

Directory of Open Access Journals (Sweden)

Tadej Petrič

2017-05-01

Full Text Available While movement is essential to human wellbeing, we are still unable to reproduce the deftness and robustness of human movement in automatons or completely restore function to individuals with many types of motor impairment. To better understand how the human nervous system plans and controls movements, neuromechanists employ simple tasks such as upper extremity reaches and isometric force tasks. However, these simple tasks rarely consider impacts and may not capture aspects of motor control that arise from real-world complexity. Here we compared existing models of motor control with the results of a periodic targeted impact task extended from Bernstein's seminal work: hammering a nail into wood. We recorded impact forces and kinematics from 10 subjects hammering at different frequencies and with hammers with different physical properties (mass and face area. We found few statistical differences in most measures between different types of hammer, demonstrating human robustness to minor changes in dynamics. Because human motor control is thought to obey optimality principles, we also developed a feedforward optimal simulation with a neuromechanically inspired cost function that reproduces the experimental data. However, Fitts' Law, which relates movement time to distance traveled and target size, did not match our experimental data. We therefore propose a new model in which the distance moved is a logarithmic function of the time to move that yields better results (R2 ≥ 0.99 compared to R2 ≥ 0.88. These results support the argument that humans control movement in an optimal way, but suggest that Fitts' Law may not generalize to periodic impact tasks.

An Analysis of the Impact of Valve Closure Time on the Course of Water Hammer

Science.gov (United States)

Kodura, Apoloniusz

2016-06-01

The knowledge of transient flow in pressure pipelines is very important for the designing and describing of pressure networks. The water hammer is the most common example of transient flow in pressure pipelines. During this phenomenon, the transformation of kinetic energy into pressure energy causes significant changes in pressure, which can lead to serious problems in the management of pressure networks. The phenomenon is very complex, and a large number of different factors influence its course. In the case of a water hammer caused by valve closing, the characteristic of gate closure is one of the most important factors. However, this factor is rarely investigated. In this paper, the results of physical experiments with water hammer in steel and PE pipelines are described and analyzed. For each water hammer, characteristics of pressure change and valve closing were recorded. The measurements were compared with the results of calculations perfomed by common methods used by engineers - Michaud's equation and Wood and Jones's method. The comparison revealed very significant differences between the results of calculations and the results of experiments. In addition, it was shown that, the characteristic of butterfly valve closure has a significant influence on water hammer, which should be taken into account in analyzing this phenomenon. Comparison of the results of experiments with the results of calculations? may lead to new, improved calculation methods and to new methods to describe transient flow.

A Comparative Analysis of the Rebound Hammer and Ultrasonic ...

African Journals Online (AJOL)

This work presents a study on the comparison between some non-destructive testing tech-niques (Rebound Hammer and Ultrasonic Pulse Velocity). Tests were performed to com-pare the accuracy between the rebound hammer and the ultrasonic pulse velocity methodin estimating the strength of concrete. Eighty samples ...

Volpentest HAMMER Federal Training Center

Data.gov (United States)

Federal Laboratory Consortium — HAMMER stands for Hazardous Materials Management and Emergency Response, and was named for Sam Volpentest, a long-time community leader and advocate of the Hanford...

INTEGRATED DRILLING SYSTEM USING MUD ACTUATED DOWN HOLE HAMMER AS PRIMARY ENGINE

Energy Technology Data Exchange (ETDEWEB)

John V. Fernandez; David S. Pixton

2005-12-01

A history and project summary of the development of an integrated drilling system using a mud-actuated down-hole hammer as its primary engine are given. The summary includes laboratory test results, including atmospheric tests of component parts and simulated borehole tests of the hammer system. Several remaining technical hurdles are enumerated. A brief explanation of commercialization potential is included. The primary conclusion for this work is that a mud actuated hammer can yield substantial improvements to drilling rate in overbalanced, hard rock formations. A secondary conclusion is that the down-hole mud actuated hammer can serve to provide other useful down-hole functions including generation of high pressure mud jets, generation of seismic and sonic signals, and generation of diagnostic information based on hammer velocity profiles.

Do chimpanzees use weight to select hammer tools?

Directory of Open Access Journals (Sweden)

Cornelia Schrauf

Full Text Available The extent to which tool-using animals take into account relevant task parameters is poorly understood. Nut cracking is one of the most complex forms of tool use, the choice of an adequate hammer being a critical aspect in success. Several properties make a hammer suitable for nut cracking, with weight being a key factor in determining the impact of a strike; in general, the greater the weight the fewer strikes required. This study experimentally investigated whether chimpanzees are able to encode the relevance of weight as a property of hammers to crack open nuts. By presenting chimpanzees with three hammers that differed solely in weight, we assessed their ability to relate the weight of the different tools with their effectiveness and thus select the most effective one(s. Our results show that chimpanzees use weight alone in selecting tools to crack open nuts and that experience clearly affects the subjects' attentiveness to the tool properties that are relevant for the task at hand. Chimpanzees can encode the requirements that a nut-cracking tool should meet (in terms of weight to be effective.

Condensate induced water hammer in a steam distribution system results in fatality

International Nuclear Information System (INIS)

Debban, H.L.; Eyre, L.E.

1996-02-01

Water hammer event s in steam distribution piping interrupt service and have the potential to cause serious injury and property damage. Conditions of condensation induced water hammer are discussed and recommendations aimed to improve safety of steam systems are presented. Condensate induced water hammer events at Hanford, a DOE facility, are examined

Systematic methodology for diagnosis of water hammer in LWR power plants

International Nuclear Information System (INIS)

Safwat, H.H.; Arastu, A.H.; Husaini, S.M.

1990-01-01

The paper gives the dimensions of the knowledge base that is necessary to carry out a diagnosis of water hammer susceptibility/root cause analyses for Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR) nuclear power plant systems. After introducing some fundamentals, water hammer phenomena are described. Situations where each phenomenon is encountered are given and analytical models capable of simulating the phenomena are referenced. Water hammer events in operating plants and their inclusion in the knowledge base is discussed. The diagnostic methodology is presented through an application on a system in a typical light water reactor plant. The methodology presented serves as a possible foundation for the creation of an expert water hammer diagnosis system. (orig.)

Condensation induced water hammer safety

International Nuclear Information System (INIS)

Gintner, M.A.

1997-01-01

Condensation induced water hammer events in piping systems can cause catastrophic steam system failures which can result in equipment damage, personal injury, and even death. As an industry, we have learned to become accustomed to the ''banging'' that we often hear in our steam piping systems, and complacent in our actions to prevent it. It is unfortunate that lives are lost needlessly, as this type of water hammer event is preventable if one only applies some basic principles when operating and maintaining their steam systems. At the U. S. Department of Energy's Hanford Site where I work, there was one such accident that occurred in 1993 which took the life of a former co-worker and friend of mine. Hanford was established as part of the Manhattan Project during World War II. it is a 560 square mile complex located along the banks of the Columbia River in Southeastern Washington State. For almost 45 years, hanford's mission was to produce weapons grade plutonium for our nations defense programs. Today, Hanford no longer produces plutonium, but is focused on site clean-up and economic diversification. Hanford still uses steam for heating and processing activities, utilizing over 20 miles of piping distribution systems similar to those found in industry. Although these aging systems are still sound, they cannot stand up to the extreme pressure pulses developed by a condensation induced water hammer

Influence of fluiddynamic parameters upon fluid-hammer forces and spectra

International Nuclear Information System (INIS)

Meder, G.; Grams, J.

1984-01-01

For proper dynamic calculation of piping systems under fluid-hammer loading it is necessary to know the frequency content of the fluid-hammer force. Therefore, in this paper, the spectra of fluid-hammer loading will be examined. In particular, the influence of a change of fluiddynamic parameters upon the spectra will be investigated. When changes are made, the normal result is a change or shift in the frequency content of the spectra. However, for changes in certain fluiddynamic parameters, only the force amplitudes are changed. Both types of changes will be discussed. (orig.)

Load and wear experiments on the impact hammer of a vertical shaft impact crusher

International Nuclear Information System (INIS)

Yang, J H; Fang, H Y; Luo, M

2015-01-01

Impact hammers are important components of impact crushers, and are often shortlived due to the high-impact nature of their use. Wear-resistant alloys are welded to the surface of impact hammers to prolong their service life. In this paper, a simulation model of the rotor and impact hammers in impact crushers was designed to utilize the Discrete Element Method (DEM). The wear-resistant alloy on each impact hammer was divided into twenty-two action regions. The load distribution on each alloy block is affected by the structural and manufacturing parameters of the impact crusher. The wear distribution of the impact hammer was measured by shape morphology according to relative impact crushers. The results demonstrated that the real measurements of wear distribution on the impact hammer were similar to simulated load distribution measurements on the same surface. The study of load distribution of impact hammers by DEM established a theoretical foundation on which to base the optimal design of impact crushers. (paper)

Chebyshev super spectral viscosity method for water hammer analysis

Directory of Open Access Journals (Sweden)

Hongyu Chen

2013-09-01

Full Text Available In this paper, a new fast and efficient algorithm, Chebyshev super spectral viscosity (SSV method, is introduced to solve the water hammer equations. Compared with standard spectral method, the method's advantage essentially consists in adding a super spectral viscosity to the equations for the high wave numbers of the numerical solution. It can stabilize the numerical oscillation (Gibbs phenomenon and improve the computational efficiency while discontinuities appear in the solution. Results obtained from the Chebyshev super spectral viscosity method exhibit greater consistency with conventional water hammer calculations. It shows that this new numerical method offers an alternative way to investigate the behavior of the water hammer in propellant pipelines.

Grid site testing for ATLAS with HammerCloud

International Nuclear Information System (INIS)

Elmsheuser, J; Hönig, F; Legger, F; LLamas, R Medrano; Sciacca, F G; Ster, D van der

2014-01-01

With the exponential growth of LHC (Large Hadron Collider) data in 2012, distributed computing has become the established way to analyze collider data. The ATLAS grid infrastructure includes more than 130 sites worldwide, ranging from large national computing centers to smaller university clusters. HammerCloud was previously introduced with the goals of enabling virtual organisations (VO) and site-administrators to run validation tests of the site and software infrastructure in an automated or on-demand manner. The HammerCloud infrastructure has been constantly improved to support the addition of new test workflows. These new workflows comprise e.g. tests of the ATLAS nightly build system, ATLAS Monte Carlo production system, XRootD federation (FAX) and new site stress test workflows. We report on the development, optimization and results of the various components in the HammerCloud framework.

Grid Site Testing for ATLAS with HammerCloud

CERN Document Server

Elmsheuser, J; The ATLAS collaboration; Legger, F; Medrano LLamas, R; Sciacca, G; van der Ster, D

2014-01-01

With the exponential growth of LHC (Large Hadron Collider) data in 2012, distributed computing has become the established way to analyze collider data. The ATLAS grid infrastructure includes more than 130 sites worldwide, ranging from large national computing centers to smaller university clusters. HammerCloud was previously introduced with the goals of enabling VO- and site-administrators to run validation tests of the site and software infrastructure in an automated or on-demand manner. The HammerCloud infrastructure has been constantly improved to support the addition of new test work-flows. These new work-flows comprise e.g. tests of the ATLAS nightly build system, ATLAS MC production system, XRootD federation FAX and new site stress test work-flows. We report on the development, optimization and results of the various components in the HammerCloud framework.

Grid Site Testing for ATLAS with HammerCloud

CERN Document Server

Elmsheuser, J; The ATLAS collaboration; Legger, F; Medrano LLamas, R; Sciacca, G; van der Ster, D

2013-01-01

With the exponential growth of LHC (Large Hadron Collider) data in 2012, distributed computing has become the established way to analyze collider data. The ATLAS grid infrastructure includes more than 130 sites worldwide, ranging from large national computing centers to smaller university clusters. HammerCloud was previously introduced with the goals of enabling VO- and site-administrators to run validation tests of the site and software infrastructure in an automated or on-demand manner. The HammerCloud infrastructure has been constantly improved to support the addition of new test work-flows. These new work-flows comprise e.g. tests of the ATLAS nightly build system, ATLAS MC production system, XRootD federation FAX and new site stress test work-flows. We report on the development, optimization and results of the various components in the HammerCloud framework.

Proximal forearm extensor muscle strain is reduced when driving nails using a shock-controlled hammer.

Science.gov (United States)

Buchanan, Kimberly A; Maza, Maria; Pérez-Vázquez, Carlos E; Yen, Thomas Y; Kijowski, Richard; Liu, Fang; Radwin, Robert G

2016-10-01

Repetitive hammer use has been associated with strain and musculoskeletal injuries. This study investigated if using a shock-control hammer reduces forearm muscle strain by observing adverse physiological responses (i.e. inflammation and localized edema) after use. Three matched framing hammers were studied, including a wood-handle, steel-handle, and shock-control hammer. Fifty volunteers were randomly assigned to use one of these hammers at a fatiguing pace of one strike every second, to seat 20 nails in a wood beam. Magnetic resonance imaging was used to scan the forearm muscles for inflammation before the task, immediately after hammering, and one to two days after. Electromyogram signals were measured to estimate grip exertions and localized muscle fatigue. High-speed video was used to calculate the energy of nail strikes. While estimated grip force was similar across the three hammers, the shock-control hammer had 40% greater kinetic energy upon impact and markedly less proximal extensor muscle edema than the wood-handle and steel-handle hammers, immediately after use (phandle shock can mitigate strain in proximal forearm extensor muscles. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Hammer-Impact, Aluminum, Shear-Wave Seismic Source

Science.gov (United States)

Haines, Seth

2007-01-01

Near-surface seismic surveys often employ hammer impacts to create seismic energy. Shear-wave surveys using horizontally polarized waves require horizontal hammer impacts against a rigid object (the source) that is coupled to the ground surface. I have designed, built, and tested a source made out of aluminum and equipped with spikes to improve coupling. The source is effective in a variety of settings, and it is relatively simple and inexpensive to build.

Modelling water hammer in viscoelastic pipelines: short brief

Science.gov (United States)

Urbanowicz, K.; Firkowski, M.; Zarzycki, Z.

2016-10-01

The model of water hammer in viscoelastic pipelines is analyzed. An appropriate mathematical model of water hammer in polymer pipelines is presented. An additional term has been added to continuity equation to describe the retarded deformation of the pipe wall. The mechanical behavior of viscoelastic material is described by generalized Kelvin-Voigt model. The comparison of numerical simulation and experimental data from well known papers is presented. Short discussion about obtained results are given.

HammerCloud: A Stress Testing System for Distributed Analysis

International Nuclear Information System (INIS)

Ster, Daniel C van der; García, Mario Úbeda; Paladin, Massimo; Elmsheuser, Johannes

2011-01-01

Distributed analysis of LHC data is an I/O-intensive activity which places large demands on the internal network, storage, and local disks at remote computing facilities. Commissioning and maintaining a site to provide an efficient distributed analysis service is therefore a challenge which can be aided by tools to help evaluate a variety of infrastructure designs and configurations. HammerCloud is one such tool; it is a stress testing service which is used by central operations teams, regional coordinators, and local site admins to (a) submit arbitrary number of analysis jobs to a number of sites, (b) maintain at a steady-state a predefined number of jobs running at the sites under test, (c) produce web-based reports summarizing the efficiency and performance of the sites under test, and (d) present a web-interface for historical test results to both evaluate progress and compare sites. HammerCloud was built around the distributed analysis framework Ganga, exploiting its API for grid job management. HammerCloud has been employed by the ATLAS experiment for continuous testing of many sites worldwide, and also during large scale computing challenges such as STEP'09 and UAT'09, where the scale of the tests exceeded 10,000 concurrently running and 1,000,000 total jobs over multi-day periods. In addition, HammerCloud is being adopted by the CMS experiment; the plugin structure of HammerCloud allows the execution of CMS jobs using their official tool (CRAB).

Design of a water-powered DTH hammer for deep drilling application

Science.gov (United States)

Cho, Min Jae; Kim, Donguk; Oh, Joo Young; Yook, Se-Jin; Kim, Young Won

2017-11-01

A DTH (Down-the-hole) hammer powered by highly pressurized fluid is a drilling tool using the motion of percussion of a drill bit. In retrospect, a DTH by using compressed air as a power source has been widely used in drilling industries such as applications of mining, geothermal etc. On the other hand, another type of a DTH that uses pressurized water, called a water hammer, has recently seen deep drilling applications, while it has been rarely investigated. In this study, we designed a water-powered DTH hammer which mainly consists of several components such as a piston, a poppet valve, a cap and a bit for deep drilling applications. We optimized the components of the hammer on the basis of the results of 1D analysis using commercial software of AMESIM. An experimental study has been also conducted to investigate a performance of the designed water hammer. We measured a pressure distribution inside the hammer system as a function of time, and it thus estimates a frequency of impaction of the bit, which has been also analyzed in frequency domain. In addition, some important parameters have been discussed in conjunction with a limitation of impaction frequency as input pressure. We believe that this study provides design rules of a water-based DTH for deep drilling applications. This work is supported by KITECH of Korean government.

Some considerations on water-hammer and cavitation following the sudden closure of a check-valve

International Nuclear Information System (INIS)

Caumette, P.; Lott, M.

1987-01-01

The function of a no-return check-valve is to obturate a pipe when the current in it has a tendancy to revert: in normal operation the valve is maintained in open position by the flow and it closes, in case of flow-rate inversion, under the action of its own weight and of the hydrodynamic forces. At the precise time of closure, the stream most of the time is suddenly interrupted, which determines a water-hammer and the separation of a water column followed by other water-hammers. The authors analyze the movement of a swing check-valve before closure and the subsequent evolution of the fluid state

Condensation induced water hammer safety

Energy Technology Data Exchange (ETDEWEB)

Gintner, M.A.

1997-03-10

Condensation induced water hammer events in piping systems can cause catastrophic steam system failures which can result in equipment damage, personal injury, and even death. As an industry, we have learned to become accustomed to the ''banging'' that we often hear in our steam piping systems, and complacent in our actions to prevent it. It is unfortunate that lives are lost needlessly, as this type of water hammer event is preventable if one only applies some basic principles when operating and maintaining their steam systems. At the U. S. Department of Energy's Hanford Site where I work, there was one such accident that occurred in 1993 which took the life of a former co-worker and friend of mine. Hanford was established as part of the Manhattan Project during World War II. it is a 560 square mile complex located along the banks of the Columbia River in Southeastern Washington State. For almost 45 years, hanford's mission was to produce weapons grade plutonium for our nations defense programs. Today, Hanford no longer produces plutonium, but is focused on site clean-up and economic diversification. Hanford still uses steam for heating and processing activities, utilizing over 20 miles of piping distribution systems similar to those found in industry. Although these aging systems are still sound, they cannot stand up to the extreme pressure pulses developed by a condensation induced water hammer.

Improving ATLAS computing resource utilization with HammerCloud

CERN Document Server

Schovancova, Jaroslava; The ATLAS collaboration

2018-01-01

HammerCloud is a framework to commission, test, and benchmark ATLAS computing resources and components of various distributed systems with realistic full-chain experiment workflows. HammerCloud contributes to ATLAS Distributed Computing (ADC) Operations and automation efforts, providing the automated resource exclusion and recovery tools, that help re-focus operational manpower to areas which have yet to be automated, and improve utilization of available computing resources. We present recent evolution of the auto-exclusion/recovery tools: faster inclusion of new resources in testing machinery, machine learning algorithms for anomaly detection, categorized resources as master vs. slave for the purpose of blacklisting, and a tool for auto-exclusion/recovery of resources triggered by Event Service job failures that is being extended to other workflows besides the Event Service. We describe how HammerCloud helped commissioning various concepts and components of distributed systems: simplified configuration of qu...

The influence of the non-Newtonian properties of blood on blood-hammer through the posterior cerebral artery.

Science.gov (United States)

Tazraei, Pedram; Riasi, Alireza; Takabi, Behrouz

2015-06-01

This work investigates a two dimensional numerical analysis of blood hammer through the posterior cerebral artery. The non-Newtonian and usual Newtonian blood models are compared in the case of blood hammer through the posterior cerebral artery to quantify the differences between the models. In this way, a validated CFD simulation is used to study non-Newtonian shear-thinning effects of blood. The governing equations for the modeling of two-dimensional transient flow are solved using a combination of characteristics and central finite difference methods, respectively for the hyperbolic and parabolic parts. Herein, the non-Newtonian viscosity characteristic of blood is incorporated by using the Carreau model. To convert the nonlinear terms available in the characteristics equation into the linear ones, the Newton-Kantorovich method is implemented. The verification and validation of the numerical results are carried out in detail. Hemodynamic characteristics of blood hammer through the posterior cerebral artery are derived with both the Newtonian and non-Newtonian models, and the results are meticulously compared and discussed. The results show that when blood hammer occurs, the non-Newtonian properties greatly influence the velocity and shear stress profiles. At the early stages of blood hammer, there is a 64% difference between magnitudes of wall shear stress in these two models, and the magnitude of the wall shear stress for the shear-thinning blood flow is lower than the Newtonian one. Copyright © 2015 Elsevier Inc. All rights reserved.

Prevention and mitigation of steam generator water hammer events in PWRs

International Nuclear Information System (INIS)

Han, J.T.; Anderson, N.

1983-01-01

Water hammer in nuclear power plants is an unresolved safety issue under study by the Nuclear Regulatory Commission (NRC). This article summarizes (1) the causes of steam generator water hammer (SGWH) events in pressurized-water reactors (PWRs), (2) various methods used to prevent or mitigate SGWH events, and (3) modifications that have been made at each operating PWR. The NRC staff considers the issue of SGWH in top feedring designs to be technically resolved. This article does not address technical findings relevant to water hammer in preheat-type steam generators

Analysis of water hammer in a penstock in the case of valve closure. Part 1: Without pressure losses

Directory of Open Access Journals (Sweden)

Hocine HAMMOUM

2016-04-01

Full Text Available We develop, in this paper, a method of calculating the water hammer inspired by the graphic construction of Bergeron, which we qualify as analytical method. In helping us of these graphs, we get the relationships that allow calculating the flow rates and pressures along a penstock. The flow of water is carried out by gravity adduction connecting at upstream a storage tank and at downstream a valve. In this first part, we neglect the pressure losses. The study will focus on water hammer-induced by a slow closing of the valve. A practical example will be presented at the end of this work in order to illustrate the exposed method.

Effects of air vessel on water hammer in high-head pumping station

International Nuclear Information System (INIS)

Wang, L; Wang, F J; Zou, Z C; Li, X N; Zhang, J C

2013-01-01

Effects of air vessel on water hammer process in a pumping station with high-head were analyzed by using the characteristics method. The results show that the air vessel volume is the key parameter that determines the protective effect on water hammer pressure. The maximum pressure in the system declines with increasing air vessel volume. For a fixed volume of air vessel, the shape of air vessel and mounting style, such as horizontal or vertical mounting, have little effect on the water hammer. In order to obtain good protection effects, the position of air vessel should be close to the outlet of the pump. Generally, once the volume of air vessel is guaranteed, the water hammer of a entire pipeline is effectively controlled

Effects of air vessel on water hammer in high-head pumping station

Science.gov (United States)

Wang, L.; Wang, F. J.; Zou, Z. C.; Li, X. N.; Zhang, J. C.

2013-12-01

Effects of air vessel on water hammer process in a pumping station with high-head were analyzed by using the characteristics method. The results show that the air vessel volume is the key parameter that determines the protective effect on water hammer pressure. The maximum pressure in the system declines with increasing air vessel volume. For a fixed volume of air vessel, the shape of air vessel and mounting style, such as horizontal or vertical mounting, have little effect on the water hammer. In order to obtain good protection effects, the position of air vessel should be close to the outlet of the pump. Generally, once the volume of air vessel is guaranteed, the water hammer of a entire pipeline is effectively controlled.

Muscle imbalance and reduced ankle joint motion in people with hammer toe deformity.

Science.gov (United States)

Kwon, O Y; Tuttle, L J; Johnson, J E; Mueller, M J

2009-10-01

Multiple factors may contribute to hammer toe deformity at the metatarsophalangeal joint. The purposes of this study were to (1) compare the ratio of toe extensor/flexor muscle strength in toes 2-4 among groups with and without hammer toe deformity, (2) to determine correlations between the ratio of toe extensor/flexor muscle strength in toes 2-4, and metatarsophalangeal joint deformity (3) to determine if other clinical measures differ between groups and if these measures are correlated with metatarsophalangeal joint angle. Twenty-seven feet with visible hammer toe deformity and 31 age matched feet without hammer toe deformity were tested. Toe muscle strength was measured using a dynamometer and the ratio of toe extensor muscle strength to flexor muscle strength was calculated. Metatarsophalangeal joint angle was measured from a computerized tomography image. Ankle and subtalar joint range of motion, and tibial torsion were measured using goniometry. Extensor/flexor toe muscle strength ratio was 2.3-3.0 times higher in the hammer toe group compared to the non-hammer toe group, in toes 2-4. The ratios of extensor/flexor toe muscle strength for toes 2-4 and metatarsophalangeal joint angle were highly correlated (r=0.69-0.80). Ankle dorsiflexion and metatarsophalangeal joint angle were negatively correlated for toes 2-4 (r=-0.38 to -0.56) as were eversion and metatarsophalangeal joint angle. These results provide insight into potential risk factors for the development of hammer toe deformity. Additional research is needed to determine the causal relationship between hammer toe deformity and the ratio of toe extensor/flexor muscle strength in toes 2-4.

Hepatopulmonary syndrome: a case report

NARCIS (Netherlands)

Huurnink, Arnold

2015-01-01

Huurnink A, Van den Berg CHSB, Booij J. Hepatopulmonary syndrome: a case report. Hepatopulmonary syndrome is characterised by a lowered oxygenation caused by intrapulmonary vascular dilatation in the setting of a liver disease. We present a case of a 42-year old woman with a Budd-Chiari syndrome,

A four-equation friction model for water hammer calculation in quasi-rigid pipelines

International Nuclear Information System (INIS)

Ghodhbani, Abdelaziz; Haj Taïeb, Ezzeddine

2017-01-01

Friction coupling affects water hammer evolution in pipelines according to the initial flow regime. Unsteady friction models are only validated with uncoupled formulation. On the other hand, coupled models such as four-equation model, provide more accurate prediction of water hammer since fluid-structure interaction (FSI) is taken into account, but they are limited to steady-state friction formulation. This paper deals with the creation of the “four-equation friction model” which is based on the incorporation of the unsteady head loss given by an unsteady friction model into the four-equation model. For transient laminar flow cases, the Zielke model is considered. The proposed model is applied to a quasi-rigid pipe with axial moving valve, and then calculated by the method of characteristics (MOC). Damping and shape of the numerical solution are in good agreement with experimental data. Thus, the proposed model can be incorporated into a new computer code. - Highlights: • Both Zielke model and four-equation model are insufficient to predict water hammer. • The four-equation friction model proposed is obtained by incorporating the unsteady head loss in the four-equation model. • The solution obtained by the proposed model is in good agreement with experimental data. • The wave-speed adjustment scheme is more efficient than interpolations schemes.

On HammerCloud and ETF

CERN Document Server

Babik, Marian; CERN. Geneva. IT Department

2017-01-01

This technical report presents the two major synthetic testing platforms used in WLCG, HammerCloud (HC) and Experiments Test Framework (ETF). It gives an overview of their architecture, components, deployment and operations and discusses the possible commonalities/differences and possible future synergies between the two projects.

Experimental studies of water hammer in propellant feed system of reaction control system

Directory of Open Access Journals (Sweden)

Avanish Kumar

2018-03-01

Full Text Available Water hammer pressure transient produces large dynamic forces which can damage the pipes and other assemblies in the feed line of a reaction control system (RCS. It has led to the failure of pressure transducers monitoring the manifold pressure in the feed line of RCS. Therefore, water hammer studies have been carried out to understand its effect in feed line. Feedline system has been simplified to develop a mathematical model and experiments have been carried out at extensive levels. The mathematical model was developed considering pipe of uniform c/s and moving liquid-gas interface. The experimental studies have been done using water as working medium instead of actual propellant. The studies showed that rate of pressurization have a very critical role on the water hammer amplitude. Sensitivity studies have been also carried out to study the effect of density, friction and initial liquid column length on water hammer amplitude. Keywords: Water hammer, Reaction control system (RCS, Propellant feed system, Experimental study, Testing

Water hammer calculation and analysis in main feedwater system of PWR nuclear power plants

International Nuclear Information System (INIS)

Wang Xin; Han Weishi

2010-01-01

The main feedwater system of a nuclear power plant is an important part in ensuring the cooling of the steam generator. Moreover, it is the main pipe section where water hammers frequently occur. Studying the regular patterns of water hammers to the main feedwater system is significant to the stable operation of the system. The paper focuses on the study of water hammers through Flowmaster's transient calculating function to establish a mathematical model with boundary conditions such as a feedwater pump, control valves, etc.; calculation of the water hammers pressure when feedwater pumps and control valves shut down; exporting the instantaneous change in solution of pressure. Combined with engineering practical examples, the conclusions verify the viability of calculating the water hammers pressure through Flowmaster's transient function, increasing the periods of closure of control valves and feedwater pumps control water hammers effectively, changing the intervals of closing signals to feedwater pumps and control valves to relieve hydraulic impact. This could be a guideline for practical engineering design and system optimization. (authors)

OREST, LWR Burnup Simulation Using Program HAMMER and ORIGEN

International Nuclear Information System (INIS)

Hesse, Ulrich; Sieberer, Johann

2006-01-01

1 - Description of program or function: In OREST, the 1-dimensional lattice code HAMMER and the isotope generation and depletion code ORIGEN are directly coupled for burnup simulation in light-water reactor fuels (GRS recommended). Additionally heavy water and graphite moderated systems can be calculated. New version differs from the previous version in the following features: An 84-group-library LIB84 for up to 200 isotopes is used to update the 3-group -POISON-XS. LIB84 uses the same energy boundaries as THERMOS and HAMLET in . In this way, high flexibility is achieved in very different reactor models. The coupling factor between THERMOS and HAMLET is now directly transferred from HAMMER to THERES and omits the equation 4 (see page 6 of the manual). Sandwich-reactor fuel reactivity and burnup calculations can be started with NGEOM = 1. Thorium graphite reactivity and burnup calculations can be started with NLIBE = 1. High enriched U-235 heavy water moderated reactivity and burnup calculations can be started. HAMLET libraries in for U-235, U-236, U-238, Np-237, Pu-238, Pu-239, Pu-240, Pu-242, Am-241, Am-243 and Zirconium are updated using resonance parameters. NEA-1324/04: A new version of the module hamme97.f has replaced the old one. 2 - Method of solution: For the user-defined irradiation history, an input data processor generates program loops over small burnup steps for the main codes HAMMER and ORIGEN. The user defined assembly description is transformed to an equivalent HAMMER fuel cell. HAMMER solves the integral neutron transport equation in a four-region cylindrical or sandwiched model with reflecting boundaries and runs with fuel power calculated rod temperatures. ORIGEN runs with HAMMER-calculated cross sections and neutron spectra and calculates isotope concentrations during burnup by solving the buildup-, depletion- and decay-chain equations. An output data processor samples the outputs of the program modules and generates tabular works for the

The significance of water hammer events to public dose from reactor accidents: A probabilistic assessment

International Nuclear Information System (INIS)

Amico, P.J.; Ferrell, W.L.; Rubin, M.P.

1984-01-01

A probabilistic assessment was made of the effects on public dose of water hammer events in LWRs. The analysis utilized actual historical water hammer data to determine if the water hammer events contributed either to system failure rates or initiating event frequencies. Representative PRAs were used to see if changes in initiating events and/or system failures caused by water hammer resulted in new values for the dominant sequences in the PRAs. New core melt frequencies were determined and carried out to the subsequent increase in public dose. It is concluded that water hammer is not a significant problem with respect to risk to the public for either BWRs or PWRs. (orig./HP)

Dynamic shock wave: hammer blow

International Nuclear Information System (INIS)

Lackme, Claude

1978-01-01

The general properties of shocks, their generation and the conditions of reflexion to an interface are dealt with in turn. By then applying these concepts to a liquid column and its environment (wall, free area, closing devices) the hammer blow is presented as being a relatively weak shock [fr

Validation of CATHENA MOD-3.5/Rev0 for single-phase water hammer

International Nuclear Information System (INIS)

Beuthe, T.G.

2000-01-01

This paper describes work performed to validate the system thermalhydraulics code CATHENA MOD-3.5c/Rev0 for single-phase water hammer. Simulations were performed and are compared quantitatively against numerical tests and experimental results from the Seven Sisters Water Hammer Facility to demonstrate CATHENA can predict the creation and propagation of pressure waves when valves are opened and closed. Simulations were also performed to show CATHENA can model the behaviour of reflected and transmitted pressure waves at area changes, dead ends, tanks, boundary conditions, and orifices in simple and more complex piping systems. The CATHENA results are shown to calculate pressure and wave propagation speeds to within 0.2% and 0.5% respectively for numerical tests and within 3.3% and 5% for experimental results respectively. These results are used to help validate CATHENA for use in single-phase water hammer analysis. They also provide assurance that the fundamental parameters needed to successfully model more complex forms of water hammer are accounted for in the MOD-3.5c/Rev0 version of CATHENA, and represent the first step in the process to validate the code for use in modelling two-phase water hammer and condensation-induced water hammer. (author)

Condensation induced water hammer in steam generators

International Nuclear Information System (INIS)

Jones, O.C. Jr.; Saha, P.; Wu, B.J.C.; Ginsberg, T.

1979-06-01

The case of condensation induced water hammer in nuclear steam generators is summarized, including both feed ring-type and economizer-type geometries. A slug impact model is described and used to demonstrate the parametric dependence of the impact pressures on heat transfer rates, initial pressures, and relative initial slug and void lengths. The results of the parametric study are related also to the economizer geometry and a suggested alternative model is presented. The importance of concerns regarding attenuation of shocks in two-phase media is delineated, and a simple experiment is described which was used to determine negligible attenuation within the accuracy of the experiment for void fractions up to over 30% in bubbly and slug flows

Hazardous Materials Management and Emergency Response (HAMMER)

Data.gov (United States)

Federal Laboratory Consortium — The Volpentest Hazardous Materials Management and Emergency Response (HAMMER) Federal Training Center is a safety and emergency response training center that offers...

Comparison of Piezosurgery and Hammer-Chisel in Endoscopic Dacryocystorhinostomy.

Science.gov (United States)

Çukurova, Ibrahim; Bulğurcu, Suphi; Arslan, Ilker Burak; Dikilitaş, Bünyamin

2018-05-08

In this study, we compared the advantages and disadvantages of piezosurgery and hammer-chisel used in endoscopic dacryocystorhinostomy (EDCR). Between January 2012 and January 2016, 10 women and 8 men in whom piezosurgery was used (group 1) and 11 women and 7 men in whom hammer-chisel was used (group 2) during EDCR operations were compared retrospectively. Recurrence, operation time, postoperative bleeding, and operative cost were evaluated in patients who were followed for an average of 11.8 months. In addition, visual analogue scale (VAS) was used to assess pain at 6 hours postoperatively. No recurrence was observed in group 1, but recurrence was observed in 2 patients in group 2 (P = 0.685). There was no postoperative bleeding in both groups. The mean duration of operation was 30.6 ± 8.2 minutes in group 1 and 46.8 ± 9.5 minutes in group 2 (P = 0.038). The VAS score in group 1 was 2.7 ± 1.4 and the VAS score in group 2 was 5.8 ± 2.2 (P = 0.01). Piezosurgery costs an additional $325 for each patient while the use of the hammer-chisel does not incur additional costs. Piezosurgery causes shorter operation time, less recurrence, and less pain when compared with hammer-chisel.

Uncertainty of Water-hammer Loads for Safety Related Systems

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Chan; Yoon, Duk Joo [Korea Hydro and Nuclear Power Co., LT., Daejeon (Korea, Republic of)

2013-10-15

In this study, the basic methodology is base on ISO GUM (Guide to the Expression of Uncertainty in Measurements). For a given gas void volumes in the discharge piping, the maximum pressure of water hammer is defined in equation. From equation, uncertainty parameter is selected as U{sub s} (superficial velocity for the specific pipe size and corresponding area) of equation. The main uncertainty parameter (U{sub s}) is estimated by measurement method and Monte Carlo simulation. Two methods are in good agreement with the extended uncertainty. Extended uncertainty of the measurement and Monte Carlo simulation is 1.30 and 1.34 respectively in 95% confidence interval. In 99% confidence interval, the uncertainties are 1.95 and 1.97 respectively. NRC Generic Letter 2008-01 requires nuclear power plant operators to evaluate the possibility of noncondensable gas accumulation for the Emergency Core Cooling System. Specially, gas accumulation can result in system pressure transient in pump discharge piping at a pump start. Consequently, this evolves into a gas water, a water-hammer event and the force imbalances on the piping segments. In this paper, MCS (Monte Carlo Simulation) method is introduced in estimating the uncertainty of water hammer. The aim is to evaluate the uncertainty of the water hammer estimation results carried out by KHNP CRI in 2013.

Bertolotti's syndrome: a case report.

Science.gov (United States)

Mitra, Raj; Carlisle, Mark

2009-01-01

A case report and literature review is presented. To review relevant data for the management of Bertolotti's syndrome and to determine whether the transverse process-ilium articulation may be a pain generator. Bertolotti's syndrome is associated with axial low back pain secondary to arthritic changes; the pain generator in the disorder is unclear. We present a case report of symptomatic Bertolotti's syndrome managed with intra-articular steroid injections. A patient with Bertolotti's syndrome had significant relief of axial pain after steroid injection of the ilium-transverse process articulation. Steroid therapy may be a non-surgical alternative for the treatment of symptomatic Bertolotti's syndrome.

Sensitivity and specificity of bell-hammer tear as an indirect sign of partial anterior cruciate ligament rupture on magnetic resonance imaging.

Science.gov (United States)

Lefevre, N; Naouri, J F; Bohu, Y; Klouche, S; Herman, S

2014-05-01

The main purpose of this study was to evaluate the usefulness of the bell-hammer sign in the diagnosis of partial tears of the anterior cruciate ligament (ACL) of the knee on MRI. A retrospective study was performed including all patients who underwent ACL reconstruction for partial or complete tears from 2008 to 2009. The diagnosis of partial or complete ACL tears was based on the appearance of the ligament bundles and the signal quality on MRI. On arthroscopy, which is considered the gold standard, each bundle was classified as normal, partially or completely torn depending on the extent of the rupture and the quality of the remaining fibres. The study included 312 patients, 83 women and 229 men (mean age 33.3 ± 19.6 years). A diagnosis of a tear was made in all patients on preoperative MRI. Arthroscopy did not show any normal ACL, 247/312 (79.2 %) complete tears and 65/312 (20.8%) partial tears, 50/65 (76.9%) on the anteromedial bundle (AM) and 15/65 (23.1%) the posterolateral bundle. The bell-hammer sign was found on MRI in 13/312 patients (4.5%). It involved 9/65 (13.8%) partial tears, all in the AM bundle, and 4/247 (1.6%) complete tears, significantly more frequent in cases of partial rupture (p hammer sign (sensitivity CI 95% = 23.1 ± 10%, specificity CI 95% = 95.9 ± 2.5%) and with the bell-hammer sign in 23/65 cases (sensitivity CI 95% = 35.4 ± 11%, specificity CI 95% = 93.9 ± 3%). The association of the bell-hammer sign with conventional radiological diagnostic criteria has improved diagnosis performance of MRI for partial tears but not significantly (ns). The most important interest of the bell-hammer sign in the day-to-day clinical work is to suggest partial tears on MRI. It aids making a diagnosis, but its absence does not exclude partial ACL rupture. Diagnostic study, Level II.

A study of water hammer phenomena in a one-component two-phase bubbly flow

International Nuclear Information System (INIS)

Fujii, Terushige; Akagawa, Koji

2000-01-01

Water hammer phenomena caused by a rapid valve closure, that is, shock phenomena in two-phase flows, are an important problem for the safety assessment of a hypothetical LOCA. This paper presents the results of experimental and analytical studies of the water hammer phenomena in a one-component tow-phase bubbly flow. In order to clarify the characteristics of water hammer phenomena, experiments for a one-component two-phase flow of Freon R-113 were conducted and a numerical simulation of pressure transients was developed. An overall picture of the water hammer phenomena in a one-component two-phase flow is presented an discussed. (author)

Water hammer due to rapid bubble growth at a severe accident

International Nuclear Information System (INIS)

Aya, Izuo; Adachi, Masaki; Shiozaki, Koki; Inasaka, Fujio

2000-01-01

On a severe accident of the light water reactor (LWR), by steam explosion and so forth due to hydrogen formation by water-metal reaction and direct contact of molted core with water, it is presumed that a lot of vapor forms for a short time in water at reactor vessel and under part of containment vessel. This study aims at and carries out, under reference of the conventional study results, experimental elucidation on coherence of water block motion due to rapid bubble growth, proposal on reduction method of water hammering, development of water hammer estimating method in an actual reactor, and proposal for upgrading of reliability on severe accident evaluation. In 1998 fiscal year, an 'Experimental apparatus on water hammering elements on sever accident' simulated rapid bubble growth due to steam explosion by injecting high pressure air into water was produced to carry out its function test. As a result of the carried out function tests, extreme water hammering phenomena were observed, by which validity of establishment on the study objects could be confirmed. (G.K.)

STUDY ON OPERATING CHARACTERISTECS OF WATER HAMMER GENERATING DEVICE FOR TREATMENT OF MICROORGANISM

Science.gov (United States)

Hamada, Tatsuhisa; Endo, Shigekatsu; Oda, Akira; Shimizu, Yasushi

The phenomenon that has been actualized due to the water quality deterioration because of the inflow of drainage and the industrial wastewater includes the phenomenon that is called water-bloom generated in the freshwater environment made a eutrophic. This is becoming a serious problem to secure the water.Mixing with the drinking water has already been confirmed, and the generation of water-bloom is becoming a big social problem, and fundamental measures have not been established yet.On the other hand, authors are proving the pressure to be a fast the pressure speed of the impact pressure by the water hammer and effective in the destruction of the blue-green algae.In this studies, the hydraulics flow characteristics of an effective water hammer pressure generator to the shredding of the water-bloom cell were examined.As a result, there was a boundary in the region where the water hammer was generated by length and the water supply head of conduit, and the water hammer pressure was able to be understood to be influenced according to the angle of the valve that generated the water hammer in addition in the water hammer generator.The demonstration in the locale was confirmed based on these and the scale etc. of an effective device to the doing water-bloom processing were able to be confirmed by continuous running.

Treatment of Rigid Hammer-Toe Deformity: Permanent Versus Removable Implant Selection.

Science.gov (United States)

Doty, Jesse F; Fogleman, Jason A

2018-03-01

Hammer-toe deformities that fail nonoperative treatment can be successfully addressed with proximal interphalangeal joint resection arthroplasty or fusion. The goal of surgery is to eliminate the deformity and rigidly fix the toe in a well-aligned position. Hammer-toe correction procedures can be performed with temporary Kirschner wire (K-wire) fixation for 3 to 6 weeks with high success rates. Pain relief with successful hammer-toe correction approaches 90%; patient satisfaction rates approximate 84%. Although complication rates are rare in most series, there remains a concern regarding exposed temporary K-wire fixation, which has led to the development of multiple permanent internal fixation options. Copyright © 2017 Elsevier Inc. All rights reserved.

Effects of valve characteristics and pipe diameter on water hammer phenomena

International Nuclear Information System (INIS)

Hur, J.; Kim, T. H.; Mun, B. H.; Choi, H. Y.; Lee, K. W.; Noh, T. S.

2001-01-01

The water hammer phenomena mean that the dynamic loads are induced on the pipe, the pipe support and the equipments in the system due to the sudden change of the flow velocity inside the pipe. The sudden changes are mainly caused by the valve sudden on/off and pump sudden start/trip. To develop a selection criterion of the parts to be analyzed for the water hammer, the effects of the valve characteristics and pipe diameter on the water hammer are analyzed. The analyses using Method of Characteristics (MOC) show that the effects of the valve pressure difference and the valve opening time are very significant, but the effects of the pipe diameter are not dominant

Qualification of the new version of HAMMER computer code

International Nuclear Information System (INIS)

Chia, C.T.

1984-06-01

(HTEC) code were tested with a great number of diferent type of experiments. This experiments covers the most important parameters in neutronic calculations, such as the cell geometry and composition. The HTEC code results have been analysed and compared with experimental data and results given by the literature and simulated by HAMMER and LEOPARD codes. The quantities used for analysis were Keff and the following integral parameters: R28 - ratio of epicadmium-to-subcadmium 238 U captures; D25 - ratio of epicadmium-to-subcadmium 235 U fission; D28 - ratio of 238 U fissions to 235 U fissions; C - ratio of 238 U captures to 235 U fissions; RC02 - ratio of epicadmium-to-subcadmium 232 Th capture. The analysis shows that the results given by the code are in good agreement with the experimental data and the results given by the other codes. The calculation that have been done with the detailed ressonance profile tabulations of plutonium isotopes shows worst results than that obtained with the ressonance parameters. Almost all the simulated cases, shows that the HTEC results are closest to the experimental data than the HAMMER results, when one do not use the detailed ressonance profile tabulations of the plutonium isotopes. (Author) [pt

Ultrasonic/Sonic Rotary-Hammer Drills

Science.gov (United States)

Badescu, Mircea; Sherrit, Stewart; Bar-Cohen, Yoseph; Bao, Xiaoqi; Kassab, Steve

2010-01-01

Ultrasonic/sonic rotary-hammer drill (USRoHD) is a recent addition to the collection of apparatuses based on ultrasonic/sonic drill corer (USDC). As described below, the USRoHD has several features, not present in a basic USDC, that increase efficiency and provide some redundancy against partial failure. USDCs and related apparatuses were conceived for boring into, and/or acquiring samples of, rock or other hard, brittle materials of geological interest. They have been described in numerous previous NASA Tech Briefs articles. To recapitulate: A USDC can be characterized as a lightweight, lowpower, piezoelectrically driven jackhammer in which ultrasonic and sonic vibrations are generated and coupled to a tool bit. A basic USDC includes a piezoelectric stack, an ultrasonic transducer horn connected to the stack, a free mass ( free in the sense that it can bounce axially a short distance between hard stops on the horn and the bit), and a tool bit. The piezoelectric stack creates ultrasonic vibrations that are mechanically amplified by the horn. The bouncing of the free mass between the hard stops generates the sonic vibrations. The combination of ultrasonic and sonic vibrations gives rise to a hammering action (and a resulting chiseling action at the tip of the tool bit) that is more effective for drilling than is the microhammering action of ultrasonic vibrations alone. The hammering and chiseling actions are so effective that unlike in conventional twist drilling, little applied axial force is needed to make the apparatus advance into the material of interest. There are numerous potential applications for USDCs and related apparatuses in geological exploration on Earth and on remote planets. In early USDC experiments, it was observed that accumulation of cuttings in a drilled hole causes the rate of penetration of the USDC to decrease steeply with depth, and that the rate of penetration can be increased by removing the cuttings. The USRoHD concept provides for

Method to study water hammer with fluid-structure interaction in spatial pipe

International Nuclear Information System (INIS)

Xi Zhide; Ma Jianzhong; Sun Lei

2013-01-01

The theory of coupling 4-function models and its solution approach are first introduced in this paper, and the method of CFD to calculate fluid-structure interaction is also introduced. Finally, the model in related reference is applied with this method to simulate the process of water hammer. By CFD calculation for the classical water hammer, the numerical scheme and grid are selected, and the results of CFD are compared with reference. The results show that the method in this paper can be used in more complex pipe system to simulate the water hammer effect. (authors)

Uncertainty and sensitivity analysis of parameters affecting water hammer pressure wave behaviour

International Nuclear Information System (INIS)

Kaliatka, A.; Uspuras, E.; Vaisnoras, M.

2006-01-01

Pressure surges occurring in pipeline systems may be caused by fast control interference, start up and shut down processes and operation failure. They lead to water hammer upstream the closing valve and cavitational hammer downstream the valve, which may cause considerable damages to the pipeline and the support structures. Appearance of water hammer in thermal-hydraulic systems was widely studied employing different state-of-the-art thermal-hydraulic codes in many organizations. For the analysis water hammer test performed at Fraunhofer Institute for Environmental, Safety and Energy Technology (UMSICHT) at Oberhausen was considered. This paper presents the comparison of UMSICHT test facility experiment calculations employing the best estimate system code RELAP5/Mod3.3 to measured water hammer values after fast closure of a valve. The analysis revealed that the calculated first pressure peak, which has the highest value, matches the measured value very well. The performed analysis (as well as any other analyses) as a results of each individual calculation always contains uncertainty owing to initial conditions of installations, errors of measuring systems, errors caused by nodalization of objects at modelling, code correlations, etc. In this connection, results of uncertainty and sensitivity analysis of the initial conditions and code-selected models are shown in the paper. (orig.)

Mathematical Methodology for New Modeling of Water Hammer in Emergency Core Cooling System

International Nuclear Information System (INIS)

Lee, Seungchan; Yoon, Dukjoo; Ha, Sangjun

2013-01-01

In engineering insight, the water hammer study has carried out through the experimental work and the fluid mechanics. In this study, a new access methodology is introduced by Newton mechanics and a mathematical method. Also, NRC Generic Letter 2008-01 requires nuclear power plant operators to evaluate the effect of water-hammer for the protection of pipes of the Emergency Core Cooling System, which is related to the Residual Heat Removal System and the Containment Spray System. This paper includes modeling, the processes of derivation of the mathematical equations and the comparison with other experimental work. To analyze the effect of water-hammer, this mathematical methodology is carried out. This study is in good agreement with other experiment results as above. This method is very efficient to explain the water-hammer phenomena

Mathematical Methodology for New Modeling of Water Hammer in Emergency Core Cooling System

Energy Technology Data Exchange (ETDEWEB)

Lee, Seungchan; Yoon, Dukjoo; Ha, Sangjun [Korea Hydro Nuclear Power Co. Ltd, Daejeon (Korea, Republic of)

2013-05-15

In engineering insight, the water hammer study has carried out through the experimental work and the fluid mechanics. In this study, a new access methodology is introduced by Newton mechanics and a mathematical method. Also, NRC Generic Letter 2008-01 requires nuclear power plant operators to evaluate the effect of water-hammer for the protection of pipes of the Emergency Core Cooling System, which is related to the Residual Heat Removal System and the Containment Spray System. This paper includes modeling, the processes of derivation of the mathematical equations and the comparison with other experimental work. To analyze the effect of water-hammer, this mathematical methodology is carried out. This study is in good agreement with other experiment results as above. This method is very efficient to explain the water-hammer phenomena.

Reliability of the input admittance of bowed-string instruments measured by the hammer method.

Science.gov (United States)

Zhang, Ailin; Woodhouse, Jim

2014-12-01

The input admittance at the bridge, measured by hammer testing, is often regarded as the most useful and convenient measurement of the vibrational behavior of a bowed string instrument. However, this method has been questioned, due especially to differences between human bowing and hammer impact. The goal of the research presented here is to investigate the reliability and accuracy of this classic hammer method. Experimental studies were carried out on cellos, with three different driving conditions and three different boundary conditions. Results suggest that there is nothing fundamentally different about the hammer method, compared to other kinds of excitation. The third series of experiments offers an opportunity to explore the difference between the input admittance measuring from one bridge corner to another and that of single strings. The classic measurement is found to give a reasonable approximation to that of all four strings. Some possible differences between the hammer method and normal bowing and implications of the acoustical results are also discussed.

Factors analysis of water hammer in FLOWMASTER for main feedwater systems of PWR nuclear power plants

International Nuclear Information System (INIS)

Wang Xin; Han Weishi

2010-01-01

The main feedwater system of a nuclear power plant (NPP) is an important part in ensuring the cooling of a steam generator. It is the main pipe section where water hammers frequently occur. Studying the regulator patterns of water hammers in the main feedwater systems is significant to the stable operation of the system. This article focuses on a parametric study to avoid the consequences of water hammer effect in PWR by employing a general purpose fluid dynamic simulation software-FLOWMASTER. Through FLOWMASTER's transient calculating functions, a mathematical model is established with boundary conditions such as feedwater pumps, control valves, etc., calculations of water hammer pressure when feedwater pumps and control valves shut down, and simulations during instantaneous changes in water hammer pressure. Combining a plethora of engineering practical examples, this research verified the viability of calculating water hammer pressure through FLOWMASTER's transient functions and we found out that, increasing the periods of closure of control valves and feedwater pumps control water hammers effectively. We also found out that changing the intervals of closing signals to feedwater pumps and control valves aid to relieve hydraulic impact. This could be a guideline for practical engineering design and system optimization. (author)

Optimal Control of the Valve Based on Traveling Wave Method in the Water Hammer Process

Science.gov (United States)

Cao, H. Z.; Wang, F.; Feng, J. L.; Tan, H. P.

2011-09-01

Valve regulation is an effective method for process control during the water hammer. The principle of d'Alembert traveling wave theory was used in this paper to construct the exact analytical solution of the water hammer, and the optimal speed law of the valve that can reduce the water hammer pressure in the maximum extent was obtained. Combining this law with the valve characteristic curve, the principle corresponding to the valve opening changing with time was obtained, which can be used to guide the process of valve closing and to reduce the water hammer pressure in the maximum extent.

Experiments of condensation-induced water hammers at the UniBw Munich

International Nuclear Information System (INIS)

Dirndorfer, Stefan; Kulisch, Helmut; Malcherek, Andreas

2013-01-01

Condensation-induced water hammers belong to the most serious and complex pressure surges. Experimental data from literature are scanty, incomplete, not public or simply missing. A new test facility at the UniBw (University of the German Armed Forces) was constructed to perform own experiments within a research alliance. This new test facility uses a complete new approach. In contrast to other test stations, the UniBw water hammer test facility is a closed system. This leads on the one hand to a more complex handling with respect of conducting experiments but on the other hand also to a more realistic characterization of thermo-hydraulic phenomena which can occur in a power plant. The first results of a measured condensation-induced water hammer are presented. (orig.)

Experiments of condensation-induced water hammers at the UniBw Munich

Energy Technology Data Exchange (ETDEWEB)

Dirndorfer, Stefan; Kulisch, Helmut; Malcherek, Andreas [Universitaet der Bundeswehr Muenchen, Neubiberg (Germany). Hydromechanik und Wasserbau

2013-03-15

Condensation-induced water hammers belong to the most serious and complex pressure surges. Experimental data from literature are scanty, incomplete, not public or simply missing. A new test facility at the UniBw (University of the German Armed Forces) was constructed to perform own experiments within a research alliance. This new test facility uses a complete new approach. In contrast to other test stations, the UniBw water hammer test facility is a closed system. This leads on the one hand to a more complex handling with respect of conducting experiments but on the other hand also to a more realistic characterization of thermo-hydraulic phenomena which can occur in a power plant. The first results of a measured condensation-induced water hammer are presented. (orig.)

Definitions of hammer toe and claw toe: an evaluation of the literature.

Science.gov (United States)

Schrier, Joost C M; Verheyen, Cees C P M; Louwerens, Jan Willem

2009-01-01

Lesser toe surgery is among the most conducted interventions in general orthopedic practice. However, the definitions of hammer toe and claw toe are not uniform. The objective of this literature study is to propose clear definitions for these deformities to establish unambiguous communication. A literature search was performed in the PubMed database (May 2006). Of 81 eligible articles, 42 that stated a clear definition of hammer toe or claw toe were selected. In all 35 articles in which hammer toe was clearly defined, flexion in the proximal interphalangeal joint was part of the definition. Seventeen articles (49%) defined hammer toe as a combination of metatarsophalangeal extension and proximal interphalangeal flexion. Thirteen articles showed flexion of the proximal interphalangeal joint as the single criterion. Twenty-three articles with a clear definition of claw toe were selected. Twenty-one articles (91%) showed metatarsophalangeal extension as part of the claw toe deformity. Twelve articles (52%) regarded metatarsophalangeal extension and flexion of the proximal interphalangeal and distal interphalangeal joints as the essential characteristics. Seven articles described a claw toe as metatarsophalangeal extension with flexion in the proximal interphalangeal joint. There are variations in the definitions of lesser toe deformities in the literature. We propose that extension of the metatarsophalangeal joint is the discriminating factor and essential characteristic for claw toe. Claw toe and hammer toe should be characterized by flexion in the proximal interphalangeal joint, which is the single criterion for a hammer toe. The flexibility of these joints could be a basic factor in discriminating between these deformities. The development of these deformities should be regarded as a continuum in the same pathophysiologic process.

Prevention and mitigation of steam-generator water-hammer events in PWR plants

International Nuclear Information System (INIS)

Han, J.T.; Anderson, N.

1982-11-01

Water hammer in nuclear power plants is an unresolved safety issue under study at the NRC (USI A-1). One of the identified safety concerns is steam generator water hammer (SGWH) in pressurized-water reactor (PWR) plants. This report presents a summary of: (1) the causes of SGWH; (2) various fixes employed to prevent or mitigate SGWH; and (3) the nature and status of modifications that have been made at each operating PWR plant. The NRC staff considers that the issue of SGWH in top feedring designs has been technically resolved. This report does not address technical findings relevant to water hammer in preheat type steam generators. 10 figures, 2 tables

Estimation on separation efficiency of aluminum from base-cap of spent fluorescent lamp in hammer crusher unit.

Science.gov (United States)

Rhee, Seung-Whee

2017-09-01

In order to separate aluminum from the base-cap of spent fluorescent lamp (SFL), the separation efficiency of hammer crusher unit is estimated by introducing a binary separation theory. The base-cap of SFL is composed by glass fragment, binder, ferrous metal, copper and aluminum. The hammer crusher unit to recover aluminum from the base-cap consists of 3stages of hammer crusher, magnetic separator and vibrating screen. The optimal conditions of rotating speed and operating time in the hammer crusher unit are decided at each stage. At the optimal conditions, the aluminum yield and the separation efficiency of hammer crusher unit are estimated by applying a sequential binary separation theory at each stage. And the separation efficiency between hammer crusher unit and roll crush system is compared to show the performance of aluminum recovery from the base-cap of SFL. Since the separation efficiency can be increased to 99% at stage 3, from the experimental results, it is found that aluminum from the base-cap can be sufficiently recovered by the hammer crusher unit. Copyright © 2017. Published by Elsevier Ltd.

Sketches of a hammer-impact, spiked-base, shear-wave source

Science.gov (United States)

Hasbrouck, W.P.

1983-01-01

Generation of shear waves in shallow seismic investigations (those to depths usually less than 100 m) can be accomplished by horizontally striking with a hammer either the end of a wood plank or metal structure embedded at the ground surface. The dimensioned sketches of this report are of a steel, hammer-impact, spiked-base, shear-wave source. It has been used on outcrops and in a desert environment and for conducting experiments on the effect of rotating source direction.

Coffin-Siris syndrome with Mayer-Rokitansky-Küster-Hauser syndrome: a case report

Directory of Open Access Journals (Sweden)

Shukla Umesh

2010-11-01

Full Text Available Abstract Introduction We report the case of an unusual association of Coffin-Siris syndrome with Mayer-Rokitansky-Küster-Hauser syndrome. This association has never previously been reported in the medical literature. Case presentation A nine-year-old Indian girl was referred to our hospital for growth retardation, mental retardation, lax joints, generalized hypertrichosis, and hypoplastic fifth fingernails and toenails. A thorough medical examination and evaluation revealed she had phenotypic features of Coffin-Siris syndrome, with Mayer-Rokitansky-Küster-Hauser syndrome on radiological evaluation. The karyotype of our patient was normal. Conclusion In an unexplained case of mental retardation with facies suggestive of Coffin-Siris syndrome, association with Mayer-Rokitansky-Küster-Hauser syndrome should be considered and the patient should be evaluated for the same. Both of these syndromes may have a common pathogenesis, as yet unknown. This case report has broad implications, as similar cases in future may give insights into the pathogenesis of both these syndromes.

An analysis on water hammer in liquid injection shutdown system of CANDU-9

International Nuclear Information System (INIS)

Kim, T. H.; Heo, J.; Han, S. K.; Choi, H. Y.; No, T. S.

2000-01-01

The water hammer analysis code, PTRAN, is used for computation of transient pressures and pressure differentials in the Liquid Injection Shutdown System(LISS) piping network of CANDU-9 to ensure that the design allowables for LEVEL C Service Limit are met for the water hammer loads resulting from the water hammer. The LISS piping network of CANDU-9 has incorporated design improvement in considering the water hammer, such as declining the horizontal part of helium header, and raising the elevation of the overall system piping configuration, etc. The maximum pressure in the LISS piping network is found to be 7.92 MPa(a) at the closed valve in the vent line, which is below the allowable working pressure and the valve design pressure under Level C service conditions. And it is also shown that the maximum pressure in CANDU-9 is much lower than that in CANDU-6

Analytical models for lower and upper bounds of the condensation-induced water hammer in long horizontal pipes

International Nuclear Information System (INIS)

Chun, Moon Hyun; Park, Joo Wan; Nam, Ho Yun

1992-01-01

Improved analytical models have been proposed that can predict the lower and upper limits of the water hammer region for given flow conditions by incorporation of recent advances made in the understanding of phenomena associated with the condensation-induced water hammer into existing methods. Present models are applicable for steam-water counterflow in a long horizontal pipe geometry. Both lower and upper bounds of the water hammer region are expressed in terms of the 'critical inlet water flow rate' as a function of axial position. Water hammer region boundaries predicted by present and typical existing models are compared for particular flow conditions of the water hammer event occurred at San Onofre Unit 1 to assess the applicability of the models examined. The result shows that present models for lower and upper bounds of the water hammer region compare favorably with the best performing existing models

Moving HammerCloud to CERN's private cloud

CERN Document Server

Barrand, Quentin

2013-01-01

HammerCloud is a testing framework for the Worldwide LHC Computing Grid. Currently deployed on about 20 hand-managed machines, it was desirable to move it to the Agile Infrastructure, CERN's OpenStack-based private cloud.

[Williams-Beuren syndrome (Williams syndrome). Case report].

Science.gov (United States)

Miklós, Györgyi; Fekete, György; Haltrich, Irén; Tóth, Miklós; Reismann, Péter

2017-11-01

Williams syndrome is a rare genetic disorder, that occurs equally in all ethnic groups and both sexes. The diagnosis might be missed during childhood in mild cases. However, establishing the diagnosis is important, not only to find the cause of intellectual disability but to look for cardiovascular, endocrine, psychiatry, urology and other conditions, which can occur at any age in the patients' lifetime. This case report presents the story of 47-year-old woman, who was admitted with haematemesis. During her stay on the ward, in the light of the distinctive facial features, mental retardation, and social behaviour patterns, the possibility of Williams syndrome emerged. Later, the diagnosis was confirmed by genetic analysis. This female is the oldest living patient with Williams syndrome in Hungary. Orv Hetil. 2017; 158(47): 1883-1888.

Waardenburg syndrome: A rare case

Directory of Open Access Journals (Sweden)

Shivlal M Rawlani

2018-01-01

Full Text Available Waardenburg Syndrome is a rare disorder of neural crest cell development. It is genetically inherited. Varying in prevalence from 1:42000 to 1:50,000, it compromises approximately 2-5% of congenital deaf children. The syndrome is not expressed in its complete form, in about 20% cases, which adds for its heterogenisity . Even among people affected in the same family,the features do vary. Unilateral heterochromia that manifests as lighter pigmentation of one iris is associated with Waardenburg syndrome and Parry-Romberg syndrome and less commonly with Hirschsprung disease. A case of ten yrs. old boy with a typical facial profile and hearing loss is reported.

Modelling of Cold Water Hammer with WAHA code

International Nuclear Information System (INIS)

Gale, J.; Tiselj, I.

2003-01-01

The Cold Water Hammer experiment described in the present paper is a simple facility where overpressure accelerates a column of liquid water into the steam bubble at the closed vertical end of the pipe. Severe water hammer with high pressure peak occurs when the vapor bubble condenses and the liquid column hits the closed end of the pipe. Experimental data of Forschungszentrum Rossendorf are being used to test the newly developed computer code WAHA and the computer code RELAP5. Results show that a small amount of noncondensable air in the steam bubble significantly affects the magnitude of the calculated pressure peak, while the wall friction and condensation rate only slightly affect the simulated phenomena. (author)

1D models for condensation induced water hammer in pipelines

International Nuclear Information System (INIS)

Bloemeling, Frank; Neuhas, Thorsten; Schaffrath, Andreas

2013-01-01

Condensation induced water hammer (CIWH) are caused by contact of steam and subcooled water. Thus, modeling the direct contact condensation is a crucial step towards the simulation of condensation induced water hammer with 1D pressure surge codes. Therefore, also the TUeV NORD SysTec GmbH and Co. KG inhouse pressure surge code DYVRO has been equipped with a new contact condensation model. The validation of DYVRO against an experiment dealing with CIWH is presented in this contribution. (orig.)

1D models for condensation induced water hammer in pipelines

Energy Technology Data Exchange (ETDEWEB)

Bloemeling, Frank; Neuhas, Thorsten; Schaffrath, Andreas [TUEV NORD SysTec GmbH und Co. KG, Hamburg (Germany)

2013-03-15

Condensation induced water hammer (CIWH) are caused by contact of steam and subcooled water. Thus, modeling the direct contact condensation is a crucial step towards the simulation of condensation induced water hammer with 1D pressure surge codes. Therefore, also the TUeV NORD SysTec GmbH and Co. KG inhouse pressure surge code DYVRO has been equipped with a new contact condensation model. The validation of DYVRO against an experiment dealing with CIWH is presented in this contribution. (orig.)

Physics-Based Pneumatic Hammer Instability Model, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Florida Turbine Technologies (FTT) proposes to conduct research necessary to develop a physics-based pneumatic hammer instability model for hydrostatic bearings...

Concurrent Van der Woude syndrome and Turner syndrome: A case report.

Science.gov (United States)

Los, Evan; Baines, Hayley; Guttmann-Bauman, Ines

2017-01-01

Most cases of Van der Woude syndrome are caused by a mutation to interferon regulatory factor 6 on chromosome 1. Turner syndrome is caused by complete or partial absence of the second sex chromosome in girls. We describe a unique case of the two syndromes occurring concurrently though apparently independently in a girl with Van der Woude syndrome diagnosed at birth and Turner syndrome at 14 years 9 months. Short stature was initially misattributed to Van der Woude syndrome and pituitary insufficiency associated with clefts before correctly diagnosing Turner syndrome. We discuss the prevalence of delayed diagnosis of Turner syndrome, the rarity of reports of concurrent autosomal chromosome mutation and sex chromosome deletion, as well as the need to consider the diagnosis of Turner syndrome in all girls with short stature regardless of prior medical history.

Idiopathic Harlequin syndrome – case report

Directory of Open Access Journals (Sweden)

Marcelina Grochowiec

2015-09-01

Full Text Available Introduction. Harlequin syndrome is a very rare neurological condition characterized by redness and excessive sweating of one half of the face in response to exercise and emotions. In most cases this disorder is not life-threatening. Objective. To present diagnostic difficulties of Harlequin syndrome in dermatological practice. Case report. We present a case of a 30-year-old man with redness and excessive sweating of the right half of the face as a result of exercise that was observed during the diagnosis of chronic urticaria at the Department of Dermatology. The patient was examined ophthalmologically and neurologically, had a CT scan of the head, and the Minor test performed. Idiopathic Harlequin syndrome was diagnosed based on case history and workup results. Conclusions . Harlequin syndrome occurs most often in the form of an idiopathic condition, but neurologic and ophthalmologic assessment should be performed since some diseases, such as brainstem infarction and schwannoma of the upper chest, may initially appear as Harlequin syndrome.

Physics-Based Pneumatic Hammer Instability Model, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this project is to develop a physics-based pneumatic hammer instability model that accurately predicts the stability of hydrostatic bearings...

Analisa Pengaruh Water Hammer Terhadap Nilai Strees Pipa Pada Sistem Loading-Offloading PT.DABN

Directory of Open Access Journals (Sweden)

Tri Adi Siswanto

2014-03-01

Full Text Available Jalur pipa (pipeline merupakan media yang  digunakan sebagai alat transportasi fluida (cair atau gas, mixed of liquid, solid dan fluid-solid mixture. Ada beberapa tahap penting dalam siklus suatu jalur perpipaan yang digunakan sebagai alat transportasi minyak atau gas: desain, konstruksi, operasional dan pemeliharaan, dan terakhir perbaikan. Operasional merupakn proses kemungkinan terbesar terjadinya kegagalan pada suatu jalur perpipaan. Salah satu kegagalan yang mungkin terjadi adalah fenomena water hammaer. Water hammer adalah sebuah fenomena terjadinhya kenaiakan tekanan yang disebabkan oleh terhenti atau dihentikannya aliran di dalam pipa secara mendadak. Hal ini bisa disebabkan oleh operasional penutupan katup yang dilakukan secara tiba-tiba. Pada paper ini akan dijelaskan kajian mengenai pengaruh kenaikan tekanan yang terjadi karena adanya fenomena water hammer terhadap nilai tegangan jalur perpipaan di sisi discharge. Dari hasil perhitungan diketahui bahwa kenaikan tekanan akibat fenomena water hammer sangat mempengaruhi naiknya nilai tegangan pada pipa. Hasil analisa menunjukan bahwa tegangan yang terjadi ketika fenomena water hammer masih dapat diterima, tetapi kenaikan tekanan ketika terjadi fenomena water hammer melebihi dari batas yang diizinkan sehingga perlu dilakukan prosedur penutupan katup yang sesuai untuk menjaga agar pada saat dioperasionalkan pipa dalam kondisi aman.

Coffin-Siris syndrome with Mayer-Rokitansky-Küster-Hauser syndrome: a case report.

Science.gov (United States)

Goyal, Deepak; Yadav, Dinesh K; Shukla, Umesh; Sethi, Sidharth K

2010-11-08

We report the case of an unusual association of Coffin-Siris syndrome with Mayer-Rokitansky-Küster-Hauser syndrome. This association has never previously been reported in the medical literature. A nine-year-old Indian girl was referred to our hospital for growth retardation, mental retardation, lax joints, generalized hypertrichosis, and hypoplastic fifth fingernails and toenails. A thorough medical examination and evaluation revealed she had phenotypic features of Coffin-Siris syndrome, with Mayer-Rokitansky-Küster-Hauser syndrome on radiological evaluation. The karyotype of our patient was normal. In an unexplained case of mental retardation with facies suggestive of Coffin-Siris syndrome, association with Mayer-Rokitansky-Küster-Hauser syndrome should be considered and the patient should be evaluated for the same. Both of these syndromes may have a common pathogenesis, as yet unknown. This case report has broad implications, as similar cases in future may give insights into the pathogenesis of both these syndromes.

Water hammer analysis in a water distribution system

Directory of Open Access Journals (Sweden)

John Twyman

2017-04-01

Full Text Available The solution to water hammer in a water distribution system (WDS is shown by applying three hybrid methods (HM based on the Box’s scheme, McCormack's method and Diffusive Scheme. Each HM formulation in conjunction with their relative advantages and disadvantages are reviewed. The analyzed WDS has pipes with different lengths, diameters and wave speeds, being the Courant number different in each pipe according to the adopted discretization. The HM results are compared with the results obtained by the Method of Characteristics (MOC. In reviewing the numerical attenuation, second order schemes based on Box and McCormack are more conservative from a numerical point of view, being recommendable their application in the analysis of water hammer in water distribution systems.

Application of perturbation methods and sensitivity analysis to water hammer problems in hydraulic networks

International Nuclear Information System (INIS)

Balino, Jorge L.; Larreteguy, Axel E.; Andrade Lima, Fernando R.

1995-01-01

The differential method was applied to the sensitivity analysis for water hammer problems in hydraulic networks. Starting from the classical water hammer equations in a single-phase liquid with friction, the state vector comprising the piezometric head and the velocity was defined. Applying the differential method the adjoint operator, the adjoint equations with the general form of their boundary conditions, and the general form of the bilinear concomitant were calculated. The discretized adjoint equations and the corresponding boundary conditions were programmed and solved by using the so called method of characteristics. As an example, a constant-level tank connected through a pipe to a valve discharging to atmosphere was considered. The bilinear concomitant was calculated for this particular case. The corresponding sensitivity coefficients due to the variation of different parameters by using both the differential method and the response surface generated by the computer code WHAT were also calculated. The results obtained with these methods show excellent agreement. (author). 11 refs, 2 figs, 2 tabs

Computation of water hammer protection of modernized pumping station

Science.gov (United States)

Himr, Daniel

2014-03-01

Pumping station supplies water for irrigation. Maximal capacity 2 × 1.2m3·s-1 became insufficient, thus it was upgraded to 2 × 2m3·s-1. Paper is focused on design of protection against water hammer in case of sudden pumps trip. Numerical simulation of the most dangerous case (when pumps are giving the maximal flow rate) showed that existing air vessels were not able to protect the system and it would be necessary to add new vessels. Special care was paid to influence of their connection to the main pipeline, because the resistance of the connection has a significant impact on the scale of pressure pulsations. Finally, the pump trip was performed to verify if the system worked correctly. The test showed that pressure pulsations are lower (better) than computation predicted. This discrepancy was further analysed.

Late-Onset Nephrotic Syndrome in Galloway-Mowat Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Hazza Issa

1999-01-01

Full Text Available Galloway-Mowat Syndrome (GMS has a wide variety of clinical manifestations and histologic findings. All reported cases had developed nephrotic syndrome in the first two years of life. We report a case of 12 years old boy with microcephaly, mental retardation, and typical dysmorphic features of GMS with a late onset of minimal change nephritic syndrome which first manifested at seven years of age.

[Pseudo-Bartter syndrome--2 cases].

Science.gov (United States)

Jóźwiak, Lucyna; Jaroszyński, Andrzej; Baranowicz-Gaszczyk, Iwona; Borowicz, Ewa; Ksiazek, Andrzej

2010-01-01

Bartter syndrome represents the group of renal disturbances characterized by hypokaliemia and metabolic alkalosis. Some diseases could display hypokalemic metabolic alkalosis without primary tubular dysfunction. These disorders are called pseudo-Bartter syndrome. In this paper we present 2 cases of pseudo-Bartter syndrome related among to other things to overuse of diuretic drugs.

[Gorlin-Goltz syndrome--a case report].

Science.gov (United States)

Debski, Tomasz; Jethon, Józef

2010-06-01

The Gorlin-Goltz syndrome (GGS) (the nevoid basal cell carcinoma syndrome-NBCCS) is an autosomal dominant syndrome caused by mutations found on chromosome 9. The syndrome is characterized by increased predisposition to develop a basal cell carcinoma and associated with multiorgan anomalies. To present a case of GGS and explain modern standards of care for patients with this syndrome. Authors report the case of a 36-year-old patient who was admitted to the Plastic Surgery Clinic due to numerous basal cell carcinomas. Previously patient underwent an orthopaedic, neurologic, dermatologic, stomatologic and surgery treatment due to particular anomalies which characterize this syndrome. Comprehensive interview and broadening of the diagnostics enabled to diagnose GGS and to introduce the appropriate treatment. GGS is a multidisciplinary problem and widespread knowledge of this syndrome could accelerate the diagnosis process. Early diagnosis of GGS allows to introduce the secondary prophylaxis and to apply the appropriate treatment to slow the progress of the syndrome.

Rare case of nephrotic syndrome: Schimke syndrome.

Science.gov (United States)

Pedrosa, Anna Kelly Krislane de Vasconcelos; Torres, Luiz Fernando Oliveira; Silva, Ana Corina Brainer Amorim da; Dantas, Adrianna Barros Leal; Zuntini, Káthia Liliane da Cunha Ribeiro; Aguiar, Lia Cordeiro Bastos

2016-01-01

Schimke syndrome corresponds to dysplasia of bone and immunity, associated with progressive renal disease secondary to nephrotic syndrome cortico-resistant, with possible other abnormalities such as hypothyroidism and blond marrow aplasia. It is a rare genetic disorder, with few reports in the literature. The most frequent renal involvement is nephrotic syndrome with focal segmental glomerulosclerosis and progressive renal failure. The objective of this study was to report a case of Schimke syndrome, diagnostic investigation and management of the case. Resumo A síndrome Schimke corresponde à displasia imuno-óssea, associada à doença renal progressiva secundária à síndrome nefrótica córtico-resistente, podendo haver outras anormalidades como hipotireoidismo e aplasia de medula óssea. Trata-se de uma patologia genética rara, com poucos relatos na literatura. O acometimento renal mais frequente é uma síndrome nefrótica por glomeruloesclerose segmentar e focal e falência renal progressiva. O objetivo deste estudo foi relatar um caso de síndrome de Schimke, investigação diagnóstica e condução do caso.

Muffling Hammer Blows In A Workshop

Science.gov (United States)

Thiele, Alfred W.; Gilbert, Jeffrey L.; Gutow, David A.

1994-01-01

Sound-deadening bags placed on hammered workpieces. Useful in many workshop situations. Fabricated easily and inexpensively. Bags filled with particles of sand, metal shot, plastic, or glass, then sewn or molded shut. Tailored to fit special configurations of some workpieces. Devices used to deaden print rollers and to reduce vibrations in main-injector inlet manifold of rocket engine.

Development of methodologies for coupled water-hammer analysis of piping systems and supports

International Nuclear Information System (INIS)

Kamil, H.; Gantayat, A.; Attia, A.; Goulding, H.

1983-01-01

The paper presents the results of an investigation on the development of methodologies for coupled water-hammer analyses. The study was conducted because the present analytical methods for calculation of loads on piping systems and supports resulting from water-hammer phenomena are overly conservative. This is mainly because the methods do not usually include interaction between the fluid and the piping and thus predict high loads on piping systems and supports. The objective of the investigation presented in this paper was to develop methodologies for coupled water-hammer analyses, including fluid-structure interaction effects, to be able to obtain realistic loads on piping systems and supports, resulting in production of more economical designs. (orig./RW)

Hermansky-Pudlak syndrome; a Case Report

Directory of Open Access Journals (Sweden)

Abbas Bagheri

2010-01-01

Full Text Available Purpose: To report a case of Hermansky-Pudlak syndrome. Case Report: A seven-year-old boy presented with marked generalized hypopigmentation, ocular exodeviation and nystagmus. He had history of easy bruising. Examination revealed green irides with marked transillumination, hypopigmented fundi and foveal hypoplasia. Further investigations disclosed platelet storage defect with adenosine diphosphate deficiency and abnormal aggregation compatible with Hermansky-Pudlak syndrome. The patient underwent strabismus surgery taking necessary precautions such as reserving platelet concentrates in case of a hemorrhagic event. Conclusion: Patients with albinism should be evaluated for Hermansky-Pudlak syndrome especially before surgery to prevent life-threatening complications.

Auto-Gopher: A Wire-Line Rotary-Hammer Ultrasonic Drill

Science.gov (United States)

Badescu, Mircea; Sherrit, Stewart; Bao, Xiaogi; Bar-Cohen, Yoseph; Chen, Beck

2011-01-01

Developing technologies that would enable NASA to sample rock, soil, and ice by coring, drilling or abrading at a significant depth is of great importance for a large number of in-situ exploration missions as well as for earth applications. Proven techniques to sample Mars subsurface will be critical for future NASA astrobiology missions that will search for records of past and present life on the planet, as well as, the search for water and other resources. A deep corer, called Auto-Gopher, is currently being developed as a joint effort of the JPL's NDEAA laboratory and Honeybee Robotics Corp. The Auto-Gopher is a wire-line rotary-hammer drill that combines rock breaking by hammering using an ultrasonic actuator and cuttings removal by rotating a fluted bit. The hammering mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) that has been developed as an adaptable tool for many of drilling and coring applications. The USDC uses an intermediate free-flying mass to transform the high frequency vibrations of the horn tip into a sonic hammering of a drill bit. The USDC concept was used in a previous task to develop an Ultrasonic/Sonic Ice Gopher. The lessons learned from testing the ice gopher were implemented into the design of the Auto-Gopher by inducing a rotary motion onto the fluted coring bit. A wire-line version of such a system would allow penetration of significant depth without a large increase in mass. A laboratory version of the corer was developed in the NDEAA lab to determine the design and drive parameters of the integrated system. The design configuration lab version of the design and fabrication and preliminary testing results are presented in this paper

Improving milling and production of a dust-producing unit equipped with hammer mills

Energy Technology Data Exchange (ETDEWEB)

Vorotnikov, Ye.G.; Nikiforov, A.A.; Rasputin, O.V.; Sukhunin, V.I.

1982-01-01

This paper presents generalized experience for deriving coarse ground coal dust in hammer mills by providing comparison data on improving efficiency of operation of the unit when switching to a coarser-type grind of the fuel. Need to have more precise formulas to calculate grinding potential of hammer mills when using a coarser grind is shown.

Lessons learned from the SONGS Unit 1 water hammer event

International Nuclear Information System (INIS)

Chiu, C.

1987-01-01

On November 21, 1985, a water hammer event occurred in horizontal feedwater line B at San Onofre Nuclear Generation Site (SONGS) Unit 1. The SONGS Unit 1 is a three-loop pressurized water reactor designed by Westinghouse Electric Corp. The event was initiated by a differential current trip on the bus of auxiliary transformer C. The root cause of the event was a simultaneous failure of five check valves in the feedwater system. Two of them are located downstream of the feedwater pump, and three of them are located further downstream and on the lines to the steam generators. The failure mechanism was determined to be flow-induced vibration, which caused repeated impact between the disk stud and the disk stop. The water hammer occurred in feedwater line B during the refilling of feedwater lines A, B, and C with auxiliary feedwater. The thermal-hydraulic process to initiate the water hammer and the reason that the water hammer only happened in line B have been fully investigated and explained. A root cause analysis after the event was prompted to answer the following two questions: (1) why did these five check valves fail at that time and not in the preceding 15 yr? (2) why did only these five check valves fail? The scope of the root cause analysis involves an investigation of the valve vibration characteristics, plant operation history, and the maintenance history of the valves. The paper answers these two questions, after a brief study of the vibration characteristics of a check valve

Steam condensation induced water hammer in a vertical up-fill configuration within an integral test facility. Experiments and computational simulations

Energy Technology Data Exchange (ETDEWEB)

Dirndorfer, Stefan

2017-01-17

Condensation induced water hammer is a source of danger and unpredictable loads in pipe systems. Studies concerning condensation induced water hammer were predominantly made for horizontal pipes, studies concerning vertical pipe geometries are quite rare. This work presents a new integral test facility and an analysis of condensation induced water hammer in a vertical up-fill configuration. Thanks to the state of the art technology, the phenomenology of vertical condensation induced water hammer can be analysed by means of sufficient high-sampled experimental data. The system code ATHLET is used to simulate UniBw condensation induced water hammer experiments. A newly developed and implemented direct contact condensation model enables ATHLET to calculate condensation induced water hammer. Selected experiments are validated by the modified ATHLET system code. A sensitivity analysis in ATHLET, together with the experimental data, allows to assess the performance of ATHLET to compute condensation induced water hammer in a vertical up-fill configuration.

Steam condensation induced water hammer in a vertical up-fill configuration within an integral test facility. Experiments and computational simulations

International Nuclear Information System (INIS)

Dirndorfer, Stefan

2017-01-01

Condensation induced water hammer is a source of danger and unpredictable loads in pipe systems. Studies concerning condensation induced water hammer were predominantly made for horizontal pipes, studies concerning vertical pipe geometries are quite rare. This work presents a new integral test facility and an analysis of condensation induced water hammer in a vertical up-fill configuration. Thanks to the state of the art technology, the phenomenology of vertical condensation induced water hammer can be analysed by means of sufficient high-sampled experimental data. The system code ATHLET is used to simulate UniBw condensation induced water hammer experiments. A newly developed and implemented direct contact condensation model enables ATHLET to calculate condensation induced water hammer. Selected experiments are validated by the modified ATHLET system code. A sensitivity analysis in ATHLET, together with the experimental data, allows to assess the performance of ATHLET to compute condensation induced water hammer in a vertical up-fill configuration.

[Two cases of Costello syndrome].

Science.gov (United States)

Masuyama, Tatsuo; Matsuo, Muneaki; Kuno, Tateo; Kitsuki, Kyoko; Kan, Yuka; Ishii, Kiyohisa; Ohtani, Yoshinobu

2003-01-01

We report two unrelated cases of Costello syndrome, presenting with poor postnatal growth, mild mental retardation, poor feeding, curly hair, coarse characteristic face, loose skin, hypotonia, and cardiac involvement. Nasal papilloma and acanthosis nigricans were the most characteristic features of this syndrome. Both cases had atrial fibrilation from infancy to early childhood. One patient had hypertonia in the lower extremities and pes equinovarus, while the other had hypotonia and pes planovalgus.

[Bilateral "crocodile tears syndrome" associated with Melkersson-Rosenthal syndrome--case report].

Science.gov (United States)

Owecki, Michał K; Kapelusiak-Pielok, Magdalena; Kowal, Piotr; Kozubski, Wojciech

2006-01-01

We present a rare case of bilateral crocodile tears syndrome (CTS) in the course of Melkersson-Rosenthal syndrome. Melkersson-Rosenthal syndrome is characterised by a triad of recurrent orofacial swelling, relapsing facial paralysis, and fissured tongue. The classic triad is infrequent and oligosymptomatic variants are seen more frequently. CTS is a rare complication of facial nerve paralysis characterised by inappropriate lacrimation on the side of the palsy in response to salivary stimuli. It results from aberrant reinnervation of the lacrimal gland by salivary parasympathetic fibres. The therapeutic approach for an acute bout of Melkersson-Rosenthal syndrome consists mainly of steroid administration. CTS management is composed of anticholinergic drugs and surgical procedures. Botulin toxin injection into the lacrimal gland is the most modern therapeutic option. In the case presented CTS developed in a 50-year-old man after 5 incidents of facial palsy due to Melkersson-Rosenthal syndrome. The case deserves attention due to the rarity of the observed symptoms and signs.

Apert Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Masoud Gharib

2012-10-01

Full Text Available Apert syndrome is a genetic defect which was first described by Eugene Apert in 1906. it's incidence is approximately one in 50000 births. This syndrome is many abnormalities in your body and Central Nervous System. rehabilitation can increase children and their parent's quality of life.We report a case of Apert syndrome and his occupational therapy program.

Structure and Conceptual Design of a Water-Hammering-Type Honsang for Restoration

Directory of Open Access Journals (Sweden)

Yong Sam Lee

2012-06-01

Full Text Available We analyzed the manufacturing procedure, specifications, repair history, and details of celestial movements of the water-hammering type Honsang (celestial globe. Results from our study on the remaining Honsangs in China and Japan and on the reconstruction models in Korea were applied to our conceptual design of the water-hammering type Honsang. A Honui (armillary sphere and Honsang using the water-hammering method were manufactured in Joseon in 1435 (the 17th year of King Sejong. Jang Yeong-Sil developed the Honsang system based on the water-operation method of Shui yün i hsiang t’ai in China. Water-operation means driving water wheels using a water flow. The most important factor in this type of operation is the precision of the water clock and the control of the water wheel movement. The water-hammering type Honsang in Joseon probably adopted the Cheonhyeong (天衡; oriental escapement device system of Shui yün i hsiang t’ai in China and the overflow mechanism of Jagyeongnu (striking clepsydra in Joseon, etc. In addition to the Cheonryun system, more gear instruments were needed to stage the rotation of the Honsang globe and the sun’s movement. In this study, the water-hammering mechanism is analyzed in the structure of a water clock, a water wheel, the Cheonhyeong system, and the Giryun system, as an organically working operation mechanism. We expect that this study will serve as an essential basis for studies on Heumgyeonggaknu, the water-operating astronomical clock, and other astronomical clocks in the middle and latter parts of the Joseon dynasty.

S-HAMMER: hierarchical attribute-guided, symmetric diffeomorphic registration for MR brain images.

Science.gov (United States)

Wu, Guorong; Kim, Minjeong; Wang, Qian; Shen, Dinggang

2014-03-01

Deformable registration has been widely used in neuroscience studies for spatial normalization of brain images onto the standard space. Because of possible large anatomical differences across different individual brains, registration performance could be limited when trying to estimate a single directed deformation pathway, i.e., either from template to subject or from subject to template. Symmetric image registration, however, offers an effective way to simultaneously deform template and subject images toward each other until they meet at the middle point. Although some intensity-based registration algorithms have nicely incorporated this concept of symmetric deformation, the pointwise intensity matching between two images may not necessarily imply the matching of correct anatomical correspondences. Based on HAMMER registration algorithm (Shen and Davatzikos, [2002]: IEEE Trans Med Imaging 21:1421-1439), we integrate the strategies of hierarchical attribute matching and symmetric diffeomorphic deformation to build a new symmetric-diffeomorphic HAMMER registration algorithm, called as S-HAMMER. The performance of S-HAMMER has been extensively compared with 14 state-of-the-art nonrigid registration algorithms evaluated in (Klein et al., [2009]: NeuroImage 46:786-802) by using real brain images in LPBA40, IBSR18, CUMC12, and MGH10 datasets. In addition, the registration performance of S-HAMMER, by comparison with other methods, is also demonstrated on both elderly MR brain images (>70 years old) and the simulated brain images with ground-truth deformation fields. In all experiments, our proposed method achieves the best registration performance over all other registration methods, indicating the high applicability of our method in future neuroscience and clinical applications. Copyright © 2013 Wiley Periodicals, Inc.

[Occupational carpal tunnel syndrome: 27 cases].

Science.gov (United States)

Slimane, Neila Ben; Elleuch, Mohamed; Gharbi, Ezzedine; Babay, Habib; Hamdoun, Moncef

2010-09-01

Carpal tunnel syndrome is the most frequent of tunnel syndromes in the field of the professional sphere. It is related to repetitive movements of flexion-extension of the wrist and fingers or to a support on the heel of the hands. To determine the posts in a risk and to specify the modalities of guaranteed reimbursement of professional carpal tunnel syndrome. A retrospective and descriptive study of 27 medical files of employees indemnified for professional carpal tunnel syndrome registered in the medical control services of the social security office in charge of medical insurance of Tunis and Sousse during a period of 10 years (1995-2004). There were 24 women and 3 men with the average age of 40 years all occupying posts in a risk. Their average time of service is 15 years. Tow-thirds of them work in the clothing and textile industry. The attack is bilateral in 13 cases. Nightly acroparaesthesia rules the clinical rate (44.44% of cases). Motor disorders are noted in the quarter of cases. The electromyogram had confirmed diagnosis in all of cases. The previous state study put in evidence the antecedent of carpal tunnel syndrome in 5 cases and diabetes in one case. Twenty-one patients had profit of permanent partial incapacity with a rate varying from 3 to 25%. Five had got a transfer of working place and one stayed in the same post with a half-time work. The professional origin of carpal tunnel syndrome must be called up in front of an activity in a risk. The reparation is done according to picture 82 of occupational diseases.

Study of effect of in-line hydropneumatic accumulators on output characteristics of hydraulic hammer

Science.gov (United States)

Redelin, R. A.; Kravchenko, V. A.; Kamanin, Y. N.; Panichkin, A. V.; Bozhanov, A. A.

2017-10-01

The article presents the results of studies of the effect of in-line hydropneumatic accumulators on the output parameters of a hydraulic hammer during their joint operation. Based on mathematical modeling, computational experiments were performed and the output characteristics of the hammer, depending on the design and operating parameters of the in-line hydropneumatic accumulators, were obtained. It was established that for the most effective operation of the hammer, the precharge pressure of the pressure line hydropneumatic accumulator should be 70-80% of the working pressure of the hydraulic system. The utilization of a hydropneumatic accumulator without special additional devices in the discharge line is impractical.

A Case: Eight-and-A-Half Syndrome

Directory of Open Access Journals (Sweden)

Cennet Nalan Kuş

2007-12-01

Full Text Available Scientific BACKGROUND: The combination of clinical one-and-a-half syndrome together with cranial nerve VII palsy is known to as eight-and-a-half syndrome. It localized the pathology to the pons. OBJECTIVE: To report a case having clinical and radiologic findings typical of eight-and-a-half syndrome. CASE: 65 year old man with hypertension presented with sudden onset of binocular diplopia left facial weakness. Magnetic resonance imaging demostrated a small lesion in the left paramedian pontine tegmentum. CONCLUSION: To our knowledge, this is the first report of a case of eight-and-a-half syndrome in Turkish literature

Solenoid hammer valve developed for quick-opening requirements

Science.gov (United States)

Wrench, E. H.

1967-01-01

Quick-opening lightweight solenoid hammer valve requires a low amount of electrical energy to open, and closes by the restoring action of the mechanical springs. This design should be applicable to many quick-opening requirements in fluid systems.

Study of cooling rates during metallic glass formation in a hammer and anvil apparatus

International Nuclear Information System (INIS)

Kroeger, D.M.; Coghlan, W.A.; Easton, D.S.; Koch, C.C.; Scarbrough, J.O.

1982-01-01

A model is presented of the simultaneous spreading and cooling of the liquid drop in a hammer and anvil apparatus for rapid quenching of liquid metals. The viscosity of the melt is permitted to vary with temperature, and to avoid mathematical complications which would be associated with spatial variation of the viscosity, Newtonian cooling is assumed. From an expression for the force required to spread the specimen, coupled equations for the mechanical energy balance for the system and the heat transfer from the sample to the hearth and hammer were obtained, and solved numerically. The sample reaches its final thickness when the force required to deform it becomes greater than the force exerted on it by the decelerating hammer. The model was fit to measurements of sample thickness versus hammer speed, using the interface heat transfer coefficient, h, as an adjustable parameter. The values of h so obtained vary somewhat with the melt alloy/substrate metal combination. From predicted cooling curves, the effects of hammer speed, sample size, and initial melt temperature on the cooling rate and the efficiency of glass formation can be assessed. Addition of sample superheat shifts the cooling curve relative to the expected position of the time-temperature-transformation curve for formation of crystalline material from the melt, and thus is an effective means of increasing the probability of glass formation in this type of apparatus

A Water Hammer Protection Method for Mine Drainage System Based on Velocity Adjustment of Hydraulic Control Valve

Directory of Open Access Journals (Sweden)

Yanfei Kou

2016-01-01

Full Text Available Water hammer analysis is a fundamental work of pipeline systems design process for water distribution networks. The main characteristics for mine drainage system are the limited space and high cost of equipment and pipeline changing. In order to solve the protection problem of valve-closing water hammer for mine drainage system, a water hammer protection method for mine drainage system based on velocity adjustment of HCV (Hydraulic Control Valve is proposed in this paper. The mathematic model of water hammer fluctuations is established based on the characteristic line method. Then, boundary conditions of water hammer controlling for mine drainage system are determined and its simplex model is established. The optimization adjustment strategy is solved from the mathematic model of multistage valve-closing. Taking a mine drainage system as an example, compared results between simulations and experiments show that the proposed method and the optimized valve-closing strategy are effective.

Identification of characteristic frequencies of damaged railway tracks using field hammer test measurements

Science.gov (United States)

Oregui, M.; Li, Z.; Dollevoet, R.

2015-03-01

In this paper, the feasibility of the Frequency Response Function (FRF)-based statistical method to identify the characteristic frequencies of railway track defects is studied. The method compares a damaged track state to a healthy state based on non-destructive field hammer test measurements. First, a study is carried out to investigate the repeatability of hammer tests in railway tracks. By changing the excitation and measurement locations it is shown that the variability introduced by the test process is negligible. Second, following the concepts of control charts employed in process monitoring, a method to define an approximate healthy state is introduced by using hammer test measurements at locations without visual damage. Then, the feasibility study includes an investigation into squats (i.e. a major type of rail surface defect) of varying severity. The identified frequency ranges related to squats agree with those found in an extensively validated vehicle-borne detection system. Therefore, the FRF-based statistical method in combination with the non-destructive hammer test measurements has the potential to be employed to identify the characteristic frequencies of damaged conditions in railway tracks in the frequency range of 300-3000 Hz.

A simple measurement hammer for quantitative reflex studies

NARCIS (Netherlands)

Stam, J.; van Leeuwen, J. R.

1984-01-01

A reflex hammer for measurement of the mechanical stimulus strength was designed. Combined with standard EMG equipment this instrument permits the study of both stimulus-response relations and latencies of myotatic reflexes. Some results in normal subjects are discussed

Theoretical calculation possibilities of the computer code HAMMER

International Nuclear Information System (INIS)

Onusic Junior, J.

1978-06-01

With the aim to know the theoretical calculation possibilities of the computer code HAMMER, developed at Savanah River Laboratory, a analysis of the crytical cells assembly of the kind utilized in PWR reactors is made. (L.F.S.) [pt

Compilation of data concerning know and suspected water hammer events in nuclear power plants, CY 1969

International Nuclear Information System (INIS)

Chapman, R.L.; Christensen, D.D.; Dafoe, R.E.; Hanner, O.M.; Wells, M.E.

1981-05-01

This report compiles data concerning known and suspected water hammer events reported by BWR and PWR power plants in the United States from January 1, 1969, to May 1, 1981. This information is summarized for each event and is tabulated for all events by plant, plant type, year of occurrence, type of water hammer, system affected, basis/cause for the event, and damage incurred. Information is also included from other events not specifically identified as water hammer related. These other events involved vibration and/or system components similar to those involved in the water hammer events. The other events are included to ensure completeness of the report, but are not used to point out particular facts or trends. This report does not evaluate findings abstracted from the data

Water hammer phenomena occurring in nuclear power installations while filling horizontal pipe containing saturated steam with liquid

Energy Technology Data Exchange (ETDEWEB)

Selivanov, Y.F.; Kirillov, P.L.; Yefanov, A.D. [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

1995-09-01

The potentiality of the water hammer occurrence in nuclear reactor loop components has been considered under the conditions of filling a steam-containing pipeline leg involving horizontal and vertical sections with liquid subcooled to the saturation temperature. As a result of free discharging from the tank, the liquid enters the horizontal pipeline. When the liquid slug formation in the pipeline is fulfilled. The pressure drop being occurred in steam flowing along the pipelines causes the liquid slug to move to the pipeline inlet. When the liquid slug decelerates, a water hammer occurs. This mechanism of water hammer occurrence is tested by experiments. The regimes of the occurrence of multiple considerable water hammers were identified.

Water hammer phenomena occurring in nuclear power installations while filling horizontal pipe containing saturated steam with liquid

International Nuclear Information System (INIS)

Selivanov, Y.F.; Kirillov, P.L.; Yefanov, A.D.

1995-01-01

The potentiality of the water hammer occurrence in nuclear reactor loop components has been considered under the conditions of filling a steam-containing pipeline leg involving horizontal and vertical sections with liquid subcooled to the saturation temperature. As a result of free discharging from the tank, the liquid enters the horizontal pipeline. When the liquid slug formation in the pipeline is fulfilled. The pressure drop being occurred in steam flowing along the pipelines causes the liquid slug to move to the pipeline inlet. When the liquid slug decelerates, a water hammer occurs. This mechanism of water hammer occurrence is tested by experiments. The regimes of the occurrence of multiple considerable water hammers were identified

A study on the initiation of condensation-induced water hammer in a long horizontal pipe

International Nuclear Information System (INIS)

Park, Joo Wan

1992-02-01

Condensation-induced water hammer (CIWH) is the most severe and has the highest frequency among the water hammer events occurred in nuclear power plants. Among mechanisms associated with this type of water hammer, the steam and water countercurrent flow in a horizontal pipe is known as the dominant mechanism in Pressurized Water Reactors. The CIWH due to steam-water counter-flow in a long horizontal pipe has been analytically investigated with emphasis on the effect of pipe length, in order to identify the conditions necessary to initiate a water hammer and to provide stability maps describing the zone of water hammer to be avoided with the combination of filling water flowrate and pipe length. Analytical models which can be used to predict the limiting boundaries, upper and lower one, of CIWH initiation have been developed and the calculation results have been compared with the data of an actual incident occurred previously in a nuclear power plant. From the approach used in this study, boundary estimates including simple relationships between critical inlet water flowrates and pipe length-to-diameter on the CIWH initiation in a long horizontal pipe could be made, and several corrective actions to prevent water hammer recurrence could be taken. However, because of the limited understanding of the direct-contact condensation phenomena in the typical range of nuclear power plant operation, it is likely that the overall uncertainty of the analysis results will be high. Therefore, further research on this area including scaling analysis is required

Water hammer prediction and control: the Green's function method

Science.gov (United States)

Xuan, Li-Jun; Mao, Feng; Wu, Jie-Zhi

2012-04-01

By Green's function method we show that the water hammer (WH) can be analytically predicted for both laminar and turbulent flows (for the latter, with an eddy viscosity depending solely on the space coordinates), and thus its hazardous effect can be rationally controlled and minimized. To this end, we generalize a laminar water hammer equation of Wang et al. (J. Hydrodynamics, B2, 51, 1995) to include arbitrary initial condition and variable viscosity, and obtain its solution by Green's function method. The predicted characteristic WH behaviors by the solutions are in excellent agreement with both direct numerical simulation of the original governing equations and, by adjusting the eddy viscosity coefficient, experimentally measured turbulent flow data. Optimal WH control principle is thereby constructed and demonstrated.

Mills’ syndrome: a case report

Directory of Open Access Journals (Sweden)

Fábio Henrique de Gobbi Porto

2009-11-01

Full Text Available The syndrome of progressive, ascending or descending hemiplegia, with no significant sensory impairment was first describes by Mills in 1900, which several cases were reported later. However after diagnostic tests and image improvements, the number of reports has shortened. A possible explanation for this shortage is the identification of other diseases that could mimic the clinical picture. Currently, the syndrome has an uncertain nosological status, since it was described based on clinical examination only. We can find this clinical presentation (Mills syndrome in cases of amyotrophic lateral sclerosis (ALS, predominant upper motor neuron amyotrophic lateral sclerosis (UMN-ALS and primary lateral sclerosis (PLS, besides its symptomatic (secondary forms. We describe a case (initial presentation and one year follow-up of progressive ascending hemiplegia with clinical isolated upper neuron signs and normal sensory examination, discussing its nosological status, electromyographic findings, differential diagnosis and prognosis.

Evaluation of water-hammer experience in nuclear power plants. Technical findings relevant to Unresolved Safety Issue A-1

International Nuclear Information System (INIS)

Serkiz, A.W.

1983-05-01

This report summarizes key technical findings relevant to the Unresolved Safety Issue A-1, Water Hammer. These findings were derived from studies of reported water hammer occurrences and underlying causes and provide key insights into means to minimize or eliminate further water hammer occurrences. It should also be noted that this report does not represent a substitute for current rules and regulations

Evaluation of water hammer occurrence in nuclear power plants: technical findings relevant to unresolved safety issue A-1

International Nuclear Information System (INIS)

1984-03-01

This report, which includes responses to public comments, summarizes key technical findings relevant to the Unresolved Safety Issue A-1, Water Hammer. These findings were derived from studies of reported water hammer occurrences and underlying causes and provide key insights into means to minimize or eliminate further water hammer occurrences. This report does not represent a substitute for current rules and regulations

A Case of Classic Raymond Syndrome

Directory of Open Access Journals (Sweden)

Nicholas George Zaorsky

2012-01-01

Full Text Available Classic Raymond syndrome consists of ipsilateral abducens impairment, contralateral central facial paresis, and contralateral hemiparesis. However, subsequent clinical observations argued on the presentation of facial involvement. To validate this entity, we present a case of classic Raymond syndrome with contralateral facial paresis. A 50 year-old man experienced acute onset of horizontal diplopia, left mouth drooling and left-sided weakness. Neurological examination showed he had right abducens nerve palsy, left-sided paresis of the lower part of the face and limbs, and left hyperreflexia. A brain MRI showed a subacute infarct in the right mid-pons. The findings were consistent with those of classic Raymond syndrome. To date, only a few cases of Raymond syndrome, commonly without facial involvement, have been reported. Our case is a validation of classic Raymond syndrome with contralateral facial paresis. We propose the concept of two types of Raymond syndrome: (1 the classic type, which may be produced by a lesion in the mid-pons involving the ipsilateral abducens fascicle and undecussated corticofacial and corticospinal fibers; and (2 the common type, which may be produced by a lesion involving the ipsilateral abducens fascicle and undecussated corticospinal fibers but sparing the corticofacial fibers.

Air distribution system with the discharge action in the working cavity of downhole air hammer drills

Science.gov (United States)

Timonin, VV; Alekseev, SE; Kokoulin, DI; Kubanychbek, B.

2018-03-01

It is proposed to carry out pre-mine methane drainage using underground degassing holes made by downhole air hammer drills. The features of downhole air drills are described. The downhole air drill layout with the simple-shape striking part is presented with its pluses and minuses. The researchers point at available options to eliminate the shortcomings. The improved layout of the downhole air hammer drill is suggested. The paper ends with the test data on the prototype air hammer drill, its characteristics and trial drilling results.

Boerhaave syndrome - case report

Directory of Open Access Journals (Sweden)

Biljana Radovanovic Dinic

Full Text Available ABSTRACT CONTEXT: Boerhaave syndrome consists of spontaneous longitudinal transmural rupture of the esophagus, usually in its distal part. It generally develops during or after persistent vomiting as a consequence of a sudden increase in intraluminal pressure in the esophagus. It is extremely rare in clinical practice. In 50% of the cases, it is manifested by Mackler's triad: vomiting, lower thoracic pain and subcutaneous emphysema. Hematemesis is an uncommon yet challenging presentation of Boerhaave's syndrome. Compared with ruptures of other parts of the digestive tract, spontaneous rupture is characterized by a higher mortality rate. CASE REPORT: This paper presents a 64-year-old female patient whose vomit was black four days before examination and became bloody on the day of the examination. Her symptoms included epigastric pain and suffocation. Physical examination showed hypotension, tachycardia, dyspnea and a swollen and painful abdomen. Auscultation showed lateral crackling sounds on inspiration. Ultrasound examination showed a distended stomach filled with fluid. Over 1000 ml of fresh blood was extracted by means of nasogastric suction. Esophagogastroduodenoscopy was discontinued immediately upon entering the proximal esophagus, where a large amount of fresh blood was observed. The patient was sent for emergency abdominal surgery, during which she died. An autopsy established a diagnosis of Boerhaave syndrome and ulceration in the duodenal bulb. CONCLUSION: Boerhaave syndrome should be considered in all cases with a combination of gastrointestinal symptoms (especially epigastric pain and vomiting and pulmonary signs and symptoms (especially suffocation.

Testing as a Service with HammerCloud

CERN Document Server

Medrano Llamas, Ramón; Elmsheuser, Johannes; Legger, Federica; Sciacca, Gianfranco; Sciabà, Andrea; van der Ster, Daniel

2014-01-01

HammerCloud was designed and born under the needs of the grid community to test the resources and automate operations from a user perspective. The recent developments in the IT space propose a shift to the software defined data centres, in which every layer of the infrastructure can be offered as a service. Testing and monitoring is an integral part of the development, validation and operations of big systems, like the grid. This area is not escaping the paradigm shift and we are starting to perceive as natural the Testing as a Service (TaaS) offerings, which allow testing any infrastructure service, such as the Infrastructure as a Service (IaaS) platforms being deployed in many grid sites, both from the functional and stressing perspectives. This work will review the recent developments in HammerCloud and its evolution to a TaaS conception, in particular its deployment on the Agile Infrastructure platform at CERN and the testing of many IaaS providers across Europe in the context of experiment requirements....

Four therapeutic cases of RS3PE syndrome

International Nuclear Information System (INIS)

Nakajima, Naoya; Fukuda, Yukiko; Yang, Kwang-Seok; Aiba, Miyoji; Tsuda, Hiroshi

2007-01-01

RS3PE syndrome (Remitting Seronegative Symmetrical Synovitis with Pitting Edema Syndrome) is one of the disorders which present as polyarthritis. It is important to be aware of RS3PE syndrome when encountering elderly patients with polyarthritis who are negative for rheumatoid factor. We report 4 cases of RS3PE syndrome. All cases shared common clinical findings, such as acute onset, symmetrical polyarthritis, pitting edema of the hands and feet, and being negative for rheumatoid factor in serum. Treatment with corticosteroid was very effective in all cases. However, two patients showed a deteriorated clinical condition during the tapering of corticosteroid. Corticosteroid should be tapered off cautiously in patients with RS3PE syndrome. (author)

Evaluation of Reductive Option of Water Hammer Phenomenon for a Water Conveyance System, A Case Study of Shahid Shirdom Residential District-Tehran

Directory of Open Access Journals (Sweden)

Kiyomars roshangar

2015-01-01

Full Text Available Sudden changes in the boundary conditions of water transmission systems, such as sudden opening and closing of valves or abrupt on and off switching of pumps and turbines cause a transient flow called ‘water hammer’. In this study, comparisons were made between the effective parameters including pipeline material, on the one hand, and the equipment and tools available for reducing the effects of water hammer, on the other. For this purpose, a practical example of a water transmission line from a pumping station located near Shahid Shirdom Residential District to the upstream reservoir in Tehran was used for modeling by the Bentley Hammer XMV: 8 software. The results obtained for the different parameters and options were compared and it was revealed that, regarding the pipe material, GRP pipes reduced pressure by 49.1 Kpa compared to the Asbestos cement pipes and by 50.3 Kpa compared to the iron pipes. Comparison of the results for the protective systems indicated that the surge tank outperformed the other alternatives in controlling pressure such that maximum pressure was reduced by 3.9 bar when using surge tanks compared to the flywheel and by 5 bar compared to the check valve. Finally, it was found that the concurrent use of the surge tank and the flywheel would be the most ideal method for controlling the water hammer effects.

A case of Cronkhite-Canada syndrome

International Nuclear Information System (INIS)

Hirohama, Shigeo; Soedjaro; Machida, Takashi

1985-01-01

A 75-year-old woman with Cronkhite-Canada syndrome underwent computed tomography (CT) and ultrasonography (US). CT and US provided useful information on pathologic conditions, including edema of the digestive mucosa, which characterize this syndrome. Clinical analysis of this syndrome in 77 Japanese cases reported in the literature was presented. (Namekawa, K.)

The Hammer Award is presented to KSC and 45th Space Wing.

Science.gov (United States)

1999-01-01

KSC's Director of Public Affairs Joe Gordon (left) applauds as Ed Gormel and Chris Fairey are named recipients of the Hammer Award at a special presentation in the IMAX 2 Theater in the Kennedy Space Center Visitor Complex. Presenting the award is Morley Winograd (at the podium), director of the National Partnership for Reinventing Government. The Hammer Award is Vice President Al Gore's special recognition of teams of federal employees who have made significant contributions in support of the principles of the National Partnership for Reinventing Government. This Hammer Award acknowledges the accomplishments of a joint NASA and Air Force team that established the Joint Base Operations and Support Contract (J-BOSC) Source Evaluation Board (SEB). Gormel and Fairey are co-chairs of the SEB. The team developed and implemented the acquisition strategy for establishing a single set of base operations and support service requirements for KSC, Cape Canaveral Air Station and Patrick Air Force Base.

Conceptual design report, Hazardous Materials Management and Emergency Response (HAMMER) Training Center

Energy Technology Data Exchange (ETDEWEB)

Kelly, K.E. [Westinghouse Hanford Co., Richland, WA (United States)

1994-11-09

For the next 30 years, the main activities at the US Department of Energy (DOE) Hanford Site will involve the management, handling, and cleanup of toxic substances. If the DOE is to meet its high standards of safety, the thousands of workers involved in these activities will need systematic training appropriate to their tasks and the risks associated with these tasks. Furthermore, emergency response for DOE shipments is the primary responsibility of state, tribal, and local governments. A collaborative training initiative with the DOE will strengthen emergency response at the Hanford Site and within the regional communities. Local and international labor has joined the Hazardous Materials Management and Emergency Response (HAMMER) partnership, and will share in the HAMMER Training Center core programs and facilities using their own specialized trainers and training programs. The HAMMER Training Center will provide a centralized regional site dedicated to the training of hazardous material, emergency response, and fire fighting personnel.

Conceptual design report, Hazardous Materials Management and Emergency Response (HAMMER) Training Center

International Nuclear Information System (INIS)

Kelly, K.E.

1994-01-01

For the next 30 years, the main activities at the US Department of Energy (DOE) Hanford Site will involve the management, handling, and cleanup of toxic substances. If the DOE is to meet its high standards of safety, the thousands of workers involved in these activities will need systematic training appropriate to their tasks and the risks associated with these tasks. Furthermore, emergency response for DOE shipments is the primary responsibility of state, tribal, and local governments. A collaborative training initiative with the DOE will strengthen emergency response at the Hanford Site and within the regional communities. Local and international labor has joined the Hazardous Materials Management and Emergency Response (HAMMER) partnership, and will share in the HAMMER Training Center core programs and facilities using their own specialized trainers and training programs. The HAMMER Training Center will provide a centralized regional site dedicated to the training of hazardous material, emergency response, and fire fighting personnel

[Jerusalem syndrome - a case report].

Science.gov (United States)

Poleszczyk, Anna; Swiecicki, Łukasz

2013-01-01

The aim of the paper was to present the case of a patient who developed acute psychotic symptoms on her visit to Jerusalem. The analysis of the clinical case and medical history. The presented 62-year-old women with a history of previous psychiatric disorder arrived with her husband to Jerusalem as a part of organised touristic group. She developed acute psychotic reaction through some stages characteristic for the third type of Jerusalem syndrome. Symptoms resolved completely soon after returning to Poland and admission to the hospital where an antipsychotic treatment was performed. Despite the rare occurrence of this phenomenon, it is worth noting that we can divide Jerusalem syndrome into three types depending on its clinical course, patient's history of previous psychiatric disorders and this division has some clinical implications. This syndrome can be also considered in the context of some factors connected with travelling in general which may be responsible for psychiatric disturbances occurring among travelers. The course of psychiatric disturbances in the presented patient resembled the third type of Jerusalem syndrome despite her past psychiatric history and probably travelling caused her decompensations. In clinical practice we have to remember that in case of the patients with a known psychiatric history, clinical evaluation may be useful before travelling. In previously healthy patients developing the third type of the Jerusalem syndrome early intervention and separation from Jerusalem and its holy places and their contact with family are crucial for soon recovery.

Condensation driven water hammer studies for feedwater distribution pipe

Energy Technology Data Exchange (ETDEWEB)

Savolainen, S.; Katajala, S.; Elsing, B.; Nurkkala, P.; Hoikkanen, J. [Imatran Voima Oy, Vantaa (Finland); Pullinen, J. [IVO Power Engineering Ltd., Vantaa (Finland); Logvinov, S.A.; Trunov, N.B.; Sitnik, J.K. [EDO Gidropress (Russian Federation)

1997-12-31

Imatran Voima Oy, IVO, operates two VVER 440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of the feed water distribution (FWD) pipes were observed in 1989. In closer examinations FWD-pipe T-connection turned out to suffer from severe erosion corrosion damages. Similar damages have been found also in other VVER 440 type NPPs. In 1994 the first new FWD-pipe was replaced and in 1996 extensive water hammer experiments were carried out together with EDO Gidropress in Podolsk. After the first phase of the experiments some fundamental changes were made to the construction of the FWD-pipe. The object of this paper is to give short insight to the design of the new FWD-pipe concentrating on water hammer experiments. (orig.).

Condensation driven water hammer studies for feedwater distribution pipe

International Nuclear Information System (INIS)

Savolainen, S.; Katajala, S.; Elsing, B.; Nurkkala, P.; Hoikkanen, J.; Pullinen, J.; Logvinov, S.A.; Trunov, N.B.; Sitnik, J.K.

1997-01-01

Imatran Voima Oy, IVO, operates two VVER 440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of the feed water distribution (FWD) pipes were observed in 1989. In closer examinations FWD-pipe T-connection turned out to suffer from severe erosion corrosion damages. Similar damages have been found also in other VVER 440 type NPPs. In 1994 the first new FWD-pipe was replaced and in 1996 extensive water hammer experiments were carried out together with EDO Gidropress in Podolsk. After the first phase of the experiments some fundamental changes were made to the construction of the FWD-pipe. The object of this paper is to give short insight to the design of the new FWD-pipe concentrating on water hammer experiments. (orig.)

Condensation driven water hammer studies for feedwater distribution pipe

Energy Technology Data Exchange (ETDEWEB)

Savolainen, S; Katajala, S; Elsing, B; Nurkkala, P; Hoikkanen, J [Imatran Voima Oy, Vantaa (Finland); Pullinen, J [IVO Power Engineering Ltd., Vantaa (Finland); Logvinov, S A; Trunov, N B; Sitnik, J K [EDO Gidropress (Russian Federation)

1998-12-31

Imatran Voima Oy, IVO, operates two VVER 440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of the feed water distribution (FWD) pipes were observed in 1989. In closer examinations FWD-pipe T-connection turned out to suffer from severe erosion corrosion damages. Similar damages have been found also in other VVER 440 type NPPs. In 1994 the first new FWD-pipe was replaced and in 1996 extensive water hammer experiments were carried out together with EDO Gidropress in Podolsk. After the first phase of the experiments some fundamental changes were made to the construction of the FWD-pipe. The object of this paper is to give short insight to the design of the new FWD-pipe concentrating on water hammer experiments. (orig.).

Gorlin syndrome: A case report

Directory of Open Access Journals (Sweden)

Patil K

2005-01-01

Full Text Available Gorlin syndrome is an autosomal dominant inherited condition that exhibits high penetrance and variable expressivity. It is characterized mainly by Basal cell carcinomas, Odontogenic keratocysts and skeletal anomalies. However, medical literature documents both common and lesser known manifestations of the disorder involving the skin, central nervous system, skeletal system etc. Diagnosis of the syndrome in childhood is basically through oral abnormalities. A case of Gorlin syndrome has been reported here, with review of literature.

Pressure and wall shear stress in blood hammer - Analytical theory.

Science.gov (United States)

Mei, Chiang C; Jing, Haixiao

2016-10-01

We describe an analytical theory of blood hammer in a long and stiffened artery due to sudden blockage. Based on the model of a viscous fluid in laminar flow, we derive explicit expressions of oscillatory pressure and wall shear stress. To examine the effects on local plaque formation we also allow the blood vessel radius to be slightly nonuniform. Without resorting to discrete computation, the asymptotic method of multiple scales is utilized to deal with the sharp contrast of time scales. The effects of plaque and blocking time on blood pressure and wall shear stress are studied. The theory is validated by comparison with existing water hammer experiments. Copyright © 2016. Published by Elsevier Inc.

Impact of pipes networks simplification on water hammer phenomenon

Indian Academy of Sciences (India)

problem; the finite difference method using water hammer and mass oscillation ... Mohamed (2003) introduced the effect of different parameters such as time of valve closure, ..... for computing the water age equivalent diameter, Dew. Dew = ⎡.

Prey selection of a captive Oystercatcher Haematopus ostralegus hammering Mussels Mytilus edulis from the ventral side

NARCIS (Netherlands)

Ens, Bruno J.; Alting, D

1996-01-01

We studied prey choice of a captive Oystercatcher:hat hammered Mussels from the ventral side. The results replicate previous findings that ventral hammerers select Mussels of intermediate size, select against thick-shelled Mussels, abandon an increasing proportion of Mussels with increasing size and

Analytical study on water hammer pressure in pressurized conduits with a throttled surge chamber for slow closure

Directory of Open Access Journals (Sweden)

Yong-liang Zhang

2010-06-01

Full Text Available This paper presents an analytical investigation of water hammer in a hydraulic pressurized pipe system with a throttled surge chamber located at the junction between a tunnel and a penstock, and a valve positioned at the downstream end of the penstock. Analytical formulas of maximum water hammer pressures at the downstream end of the tunnel and the valve were derived for a system subjected to linear and slow valve closure. The analytical results were then compared with numerical ones obtained using the method of characteristics. There is agreement between them. The formulas can be applied to estimating water hammer pressure at the valve and transmission of water hammer pressure through the surge chamber at the junction for a hydraulic pipe system with a surge chamber.

Neuroleptic malignant syndrome (a case report.

Directory of Open Access Journals (Sweden)

Patkar A

1991-07-01

Full Text Available An adult schizophrenic patient developed neuroleptic malignant syndrome following treatment with parenteral haloperidol. An early recognition of the syndrome, immediate discontinuation of the offending agent and prompt treatment with bromocriptine and lorazepam produced a good recovery. The various features of the case are discussed in view of the potential lethality of the syndrome.

Mills’ syndrome: case report

OpenAIRE

Henrique de Gobbi Porto, Fábio; Orsini, Marco; Antônio Araújo Leite, Marco; Moreira dos Santos, José; Pulier, Soraia; Mello, Mariana; Nascimento, Osvaldo J.M.

2009-01-01

The syndrome of progressive, ascending or descending hemiplegia, with no significant sensory impairment was first describes by Mills in 1900, which several cases were reported later. However after diagnostic tests and image improvements, the number of reports has shortened. A possible explanation for this shortage is the identification of other diseases that could mimic the clinical picture. Currently, the syndrome has an uncertain nosological status, since it was described based on clinical ...

Meckel Gruber Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Celal Devecioglu

2004-01-01

Full Text Available Meckel-Gruber syndrome is an autosomal recessive disordercharacterized by a combination of renal cysts and variably associatedfeatures including developmental anomalies of the central nervous system(typically encephalocele, hepatic ductal dysplasia and cysts, andpolydactyly. n this cases AFP levels are increases. Alternative names areMeckel Syndrome, Dysencephalia Splanchnocystica, Gruber Syndrome andMeckel – Gruber Syndrome. This study is presented to draw attention to theMeckel Gruber Syndrome which seen rarely, have high risk of reccurenceand antenathal determination of AFP levels and early diagnosis byultrasonographic screening can be confident.

Saturation of plastic deformation by swift heavy ion irradiation: Ion hammering vs. surface effects

Energy Technology Data Exchange (ETDEWEB)

Ferhati, Redi; Dautel, Knut; Bolse, Wolfgang [Institut fuer Halbleiteroptik und Funktionelle Grenzflaechen, Universitaet Stuttgart (Germany); Fritzsche, Monika [Helmholtz-Zentrum Dresden-Rossendorf (Germany)

2012-07-01

Swift heavy ion (SHI) induced plastic deformation is a subject of current research and scientific discussion. This *Ion Hammering* phenomenon was first observed 30 years ago in amorphous materials like metallic glasses. About 10 years ago, Feyh et al. have shown that stress generation and *Ion Hammering* result in self-organization of thin NiO-films on Si-wafers into a sub-micron lamellae-like structure under grazing angle irradiation. The growth of the lamellae was found to saturate as soon as they have reached a thickness of a few hundreds of nm. Here we show our latest results on the restructuring of pre-patterned thin oxide films by SHI under various irradiation conditions. The experiments were performed by employing (in-situ) scanning electron microscopy, and were complemented by (in-situ) energy dispersive x-ray analysis and atomic force microscopy. As we will show, the saturation behavior can be understood as a competition of *Ion Hammering* and surface energy effects, while the unexpected fact, that the initially crystalline films undergo *Ion Hammering* can possibly be attributed to oxygen loss and thus amorphization during irradiation.

Lemierre syndrome: two cases and a review.

Science.gov (United States)

Syed, Mohammed Iqbal; Baring, David; Addidle, Michael; Murray, Craig; Adams, Calum

2007-09-01

Lemierre syndrome is usually caused by an acute oropharyngeal infection in previously healthy young adults, resulting in thrombophlebitis of the internal jugular vein, leading to metastatic septic embolization and bacteraemia. The usual organism is Fusobacterium necrophorum. Lemierre syndrome, not so long ago labeled as the "forgotten disease," is on the rise. Today with increasing antibiotic-resistant organisms, and decreasing awareness of the syndrome, subsequent re-emergence of this "forgotten disease" is becoming more common in clinical settings. Lemierre syndrome has significant morbidity. Cranial nerve complications associated with the condition have been increasingly diagnosed in the last few years. Looking back at literature on Lemierre syndrome, there have been review articles in medical and microbiology journals but rarely in otolaryngology journals. By presenting our cases we demonstrate the diverse presentations and severity of the illness. A review of the literature and a case report on two cases seen in our institution in the last year are presented. Each of these had varied presentations and neurologic complications-one developed 9th to 12th cranial nerve palsies and Horner syndrome, which have not been described in previous literature, and the other developed polyneuropathy and a frontal lobe infarct among other multisystem complications. Diagnosis of Lemierre syndrome is not always straightforward as clinical features are variable and blood cultures are often negative. Awareness of the syndrome and a high degree of suspicion are needed.

A CASE OF METABOLIC SYNDROME

OpenAIRE

Khoo Ee Ming; Rabia Khatoon

2006-01-01

This case report illustrates a 40-year-old woman who presented with chest discomfort that was subsequently diagnosed to have metabolic syndrome. Metabolic syndrome is a common condition associated with increased cardiovascular morbidity and mortality. As primary care providers, we should be detect this condition early, intervene and prevent appropriately before complications occur.

Application of air hammer drilling technology in igneous rocks of Junggar basin

Science.gov (United States)

Zhao, Hongshan; Feng, Guangtong; Yu, Haiye

2018-03-01

There were many technical problems such as serious well deviation, low penetration rate and long drilling cycle in igneous rocks because of its hardness, strong abrasive and poor drillability, which severely influenced the exploration and development process of Junggar basin. Through analyzing the difficulties of gas drilling with roller bits in Well HS 2, conducting the mechanics experiments about igneous rock, and deeply describing the rock-breaking mechanism of air hammer drilling and its adaptability in igneous rocks, air hammer drilling can realize deviation control and fast drilling in igneous rocks of piedmont zone and avoid the wear and fatigue fracture of drilling strings due to its characteristics of low WOB, low RPM and high frequency impact. Through firstly used in igneous rocks of Well HS 201, compared with gas drilling with cone bit, the average penetration rate and one-trip footage of air hammer drilling respectively increased by more than 2.45 times and 6.42 times while the well deviation was always controlled less than 2 degrees. Two records for Block HS were set up such as the fastest penetration rate of 14.29m/h in Φ444.5mm well hole and the highest one-trip footage of 470.62m in Φ311.2mm well hole. So air hammer drilling was an effective way to realize optimal and fast drilling in the igneous rock formation of Junggar basin.

Bartter's syndrome: A case report of nephrocalcinosis

OpenAIRE

KOŞAN, Celalettin

2014-01-01

Bartter's syndrome is characterized by generalized hyperplasia of juxtaglomerular apparatus, hyperreninism leading to secondary hyperaldesteronism, hypokalemic alkalosis and normal blood pressure. Although nephrocalcinosis has been described sporadically in patients with Barter's syndrome, this is still generally unrecognized. We reported a case of Barter's syndrome with nephrocalcinosis and discussed clinical significance of nephrocalcinosis in this syndrome.

Analysis of water hammer phenomena - Application to deaerator-feedwater pump node

International Nuclear Information System (INIS)

Bigu, Melania; Tenescu, Mircea; Nita, Iulian Pavel

2008-01-01

The hydraulic hammer adverse effects are extensively presented in the literature available to those who operate and design installations in which this phenomenon occurs. There are specialized computational programs which evaluate diverse technical aspects which occur in this phenomenon. One must be noticed that not all the technical characteristics and not all effective operating modes which are treated in this paper are covered by existing computational programs. Moreover, even specialized developers of such programs recommend insistently that computational results offered by specialized programs to be verified by specialized technologists with experience in alternative theoretical computations in order to avoid any misinterpretation of results obtained by computational codes. After selective exposures of theoretical fundamentals of the problem there are presented a computational calculation obtained using the specialized calculation code PIPENET (Sunrise System Limited, Cambridge, Great Britain). The PIPENET calculation is compared with a standard computational calculation using theoretical correlations. An evaluation of the differences between those two computational methods is made in order to reveal the capabilities of the computational codes in solving the hydraulic hammering problems. In the first stage we obtained the elastic characteristics of the pipe where the phenomena of hydraulic hammering takes place. There are derivative descriptions of differential equations which describe the physical phenomena. In the second part we carried out a complete system analysis of water hammer effect due to a faulty closing of the four level control valves in steam generators. We compared the highest attended pressure with design pressure of the system. We observed that the design pressure is not overpassed. The analysis concluded that pumps' head protection is a very important parameter against overpressure in the feed water system. (authors)

Computerized Hammer Sounding Interpretation for Concrete Assessment with Online Machine Learning.

Science.gov (United States)

Ye, Jiaxing; Kobayashi, Takumi; Iwata, Masaya; Tsuda, Hiroshi; Murakawa, Masahiro

2018-03-09

Developing efficient Artificial Intelligence (AI)-enabled systems to substitute the human role in non-destructive testing is an emerging topic of considerable interest. In this study, we propose a novel hammering response analysis system using online machine learning, which aims at achieving near-human performance in assessment of concrete structures. Current computerized hammer sounding systems commonly employ lab-scale data to validate the models. In practice, however, the response signal patterns can be far more complicated due to varying geometric shapes and materials of structures. To deal with a large variety of unseen data, we propose a sequential treatment for response characterization. More specifically, the proposed system can adaptively update itself to approach human performance in hammering sounding data interpretation. To this end, a two-stage framework has been introduced, including feature extraction and the model updating scheme. Various state-of-the-art online learning algorithms have been reviewed and evaluated for the task. To conduct experimental validation, we collected 10,940 response instances from multiple inspection sites; each sample was annotated by human experts with healthy/defective condition labels. The results demonstrated that the proposed scheme achieved favorable assessment accuracy with high efficiency and low computation load.

Two cases of Cantrell's syndrome

International Nuclear Information System (INIS)

Yu, Yun Jeong; Yeon, Kyung Mo

1982-01-01

Congenital absence of the lower sternum, defect of the abdominal wall, defects of the anterior diaphragm, pericardial defects and cardiac anomalies had been described as a syndrome by Cantrell et al. Developing mechanism of the syndrome was embryologically defined. These defects arise apparently from combined anomalies of developing of the dorsal mesoderm. The authors present two cases of Cantrell's syndrome developed in one day old and eight months old female patient in which angiocardiography was done at the Department of Radiology, Seoul National University Hospital

Benedikt's Syndrome: A Rare Case Report

Directory of Open Access Journals (Sweden)

Aslı Aksoy Gundogdu

2017-08-01

Full Text Available Benedikt syndrome is a rare midbrain syndrome which is associated with the damage of the median mesencephalic tegmentum. The most common etiology of this syndrome is ischemic stroke. The occlusion of the posterior cerebral artery or the paramedian branches of the basilar artery results with the ischemia of this midbrain territory. Ipsilateral occulomotor cranial nerve palsy, contralateral hemiparesis, hemihypoesthesia, hemiataxia and korea or tremor are the clinical symptoms of this syndrome. In this article, we reported a case of Benedikt syndrome with an etiologic cause of cardioembolic stroke, who was diagnosed by the neurological examination and neuroradiological findings.

Water hammer with column separation : a historical review

NARCIS (Netherlands)

Bergant, A.; Simpson, A.R.; Tijsseling, A.S.

2006-01-01

Column separation refers to the breaking of liquid columns in fully filled pipelines. This may occur in a water-hammer event when the pressure in a pipeline drops to the vapor pressure at specific locations such as closed ends, high points or knees (changes in pipe slope). The liquid columns are

Water Hammer Analysis using RELAP5/MOD 3.3 for Yonggwang Nuclear Power Unit 1 and 2 Blowdown System

International Nuclear Information System (INIS)

Lee, Sang Il; Kim, Hea Zoo; Chu, Jung Ho; Ahn, Se Hong; Jung, Chang Ho

2010-01-01

Water hammer can be defined as a rapid pressure step occurring in the liquid in a closed pipe caused by a sudden change in the liquid velocity. This pressure acts for a period which is twice the transit time of sonic wave in the pipe. Generally, water hammer can occur in any thermal-hydraulic systems like nuclear power plant and is extremely dangerous for nuclear power plant piping system since, if the pressure induced exceeds the pressure range of the pipe given by the manufacturer, it can lead to the failure of the piping system integrity. For Yonggwang nuclear power unit 1 and 2, water hammer occurred repeatedly on the outlet piping of regenerative heat exchanger of steam generator blowdown system. Thus, design modification was performed to prevent the water hammer and the analysis of effect on water hammer before and after design modification was performed to verify the validity of the design modification

Ortner's syndrome: case series and literature review.

Science.gov (United States)

Subramaniam, Vijayalakshmi; Herle, Adarsha; Mohammed, Navisha; Thahir, Muhammad

2011-01-01

More than a century ago, Ortner described a case of cardiovocal syndrome wherein he attributed a case of left vocal fold immobility to compression of the recurrent laryngeal nerve by a dilated left atrium in a patient with mitral valve stenosis. Since then, the term Ortner's syndrome has come to encompass any nonmalignant, cardiac, intrathoracic process that results in embarrassment of either recurrent laryngeal nerve-usually by stretching, pulling, or compression; and causes vocal fold paralysis. Not surprisingly, the left recurrent laryngeal nerve, with its longer course around the aortic arch, is more frequently involved than the right nerve, which passes around the subclavian artery. To discuss the pathogenesis of hoarseness resulting from cardiovascular disorders involving the recurrent laryngeal nerve along with the findings of literature review. This paper reports a series of four cases of Ortner's syndrome occurring due to different causes. Case study. Ortner's syndrome could be a cause of hoarseness of voice in patients with cardiovascular diseases. Although hoarseness of voice is frequently encountered in the Otolaryngology outpatient department, cardiovascular- related hoarseness is an unusual presentation. Indirect laryngoscopy should be routinely performed in all cases of heart disease.

Stewart-Treves syndrome: case report

Energy Technology Data Exchange (ETDEWEB)

Andrade, Wesley Pereira [Hospital A.C. Camargo, Sao Paulo, SP (Brazil). Mastology Dept.], e-mail: wesley.andrade@hotmail.com; Aguiar Junior, Samuel; Lopes, Ademar [Hospital A.C. Camargo, Sao Paulo, SP (Brazil). Pelvic Surgery Dept.; Batista, Ranyell Matheus Spencer S.; Ribeiro, Marcio Ventura [Hospital A.C. Camargo, Sao Paulo, SP (Brazil)

2008-07-01

In 1948 Stewart and Treves described a syndrome related to the association between lymphangiosarcoma and chronic lymphedema due to radical mastectomy and radiotherapy. Currently, literature data reveals around 400 published cases. However, this pathology is becoming each time rarer due to the growing indication of conservative breast surgery and sentinel lymphonode research, thus reducing the need of axillary lymph node dissection with subsequent lymphedema. Described will be the case of a woman that developed angiosarcoma in shoulder 17 years after mastectomy with adjuvant radiotherapy.Stewart-Treves syndrome is related to the rise of angiosarcoma in patients with chronic lymphedema. It is currently treated as a rare disease. We describe the case of a woman who developed angiosarcoma in shoulder 17 years after mastectomy with adjuvant radiotherapy. (author)

Stewart-Treves syndrome: case report

International Nuclear Information System (INIS)

Andrade, Wesley Pereira

2008-01-01

In 1948 Stewart and Treves described a syndrome related to the association between lymphangiosarcoma and chronic lymphedema due to radical mastectomy and radiotherapy. Currently, literature data reveals around 400 published cases. However, this pathology is becoming each time rarer due to the growing indication of conservative breast surgery and sentinel lymphonode research, thus reducing the need of axillary lymph node dissection with subsequent lymphedema. Described will be the case of a woman that developed angiosarcoma in shoulder 17 years after mastectomy with adjuvant radiotherapy.Stewart-Treves syndrome is related to the rise of angiosarcoma in patients with chronic lymphedema. It is currently treated as a rare disease. We describe the case of a woman who developed angiosarcoma in shoulder 17 years after mastectomy with adjuvant radiotherapy. (author)

Gingival fibromatosis with hypertrichosis syndrome: Case series of rare syndrome

Directory of Open Access Journals (Sweden)

Preetha Balaji

2017-01-01

Full Text Available Gingival fibromatosis with hypertrichosis syndrome is an extremely rare genetic condition characterized by profound overgrowth of hair and gums, as well as other variable features. Gingival fibromatosis is characterized by a large increase in the gingival dimension which extends above the dental crowns, covering them partially or completely. They were found to have a genetic origin, may also occur in isolation or be part of a syndrome, or acquired origin, due to specific drugs administered systemically. Congenital generalized hypertrichosis is a heterogeneous group of diseases with continuing excessive growth of terminal hair without androgenic stimulation. It has informally been called werewolf syndrome because the appearance is similar to that of a werewolf. Various syndromes have been associated with these features such as epilepsy, mental retardation, cardiomegaly, or osteochondrodysplasia. As so far very few cases have been reported in literature, we are reporting a series of three cases with management of the same. The excess gingival tissues, in these cases, were removed by conventional gingivectomy under general anesthesia. The postoperative result was uneventful and the patient's appearance improved significantly. Good esthetic result was achieved to allow patient to practice oral hygiene measures. Though this is not a serious condition clinically, psychosocial trauma cannot be neglected owing to the cosmetic disfigurement it produces.

Wave Stresses in the Anvil Hammer Rods under Impact Including Ram Mass and Deformation Force of Forgings

Directory of Open Access Journals (Sweden)

V. M. Sinitskiy

2016-01-01

Full Text Available When operating the anvil hammers there occur impacts of die tooling and as a consequence, virtually instantaneous impact stops of motion of drop hammer parts. Such operating conditions come with accelerated failures of the anvil hammer rods because of emerging significant wave stresses. Engineering practice widely uses variation, difference, and integral methods to calculate wave stresses. However, to use them a researcher has to acquire certain skills, and the special programs should be available. The paper considers a method for estimating the wave stress changes in the anvil hammer rods, which is based on the wave equation of the Laplace transform. It presents a procedure for generating differential equations and their solution using the operator method. These equations describe the wave processes of strain and stress propagation in the anvil hammer rod under non-rigid impact with the compliance obstacle of the drop hammer parts. The work defines how the piston and rod mass and also the mechanical and geometric parameters of the rod influence on the stress level in the rod sealing of the hammer ram. Analysis of the results shows that the stresses in the rod sealing are proportional to the total amount of wave stresses caused by the rod and piston impact included in the total weight of the system. The piston influence on the stresses in the rod under impact is in direct proportion to the ratio of its mass to the mass of the rod. Geometric parameters of the rod and speed of drop parts before the impact influence on the stress value as well. It was found that if the time of impact is less than the time of the shock wave running in forward and backward direction, the impact with a compliance obstacle is equivalent to that of with a rigid obstacle, and the dependence of the wave stresses follows the Zhukovsky formula of direct pressure shock. The presented method of stress calculation can be successfully used to select the optimal mass and the rod

Chanarin Dorfman Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Yasemin Ozkale

2015-09-01

Full Text Available Chanarin Dorfman Syndrome is a multisystem inherited metabolic disorder associated with congenital ichthyosis and accumulation of lipid droplets in varios types of cells. Observation of lipid vacuoles in neutrophils (Jordan's anomaly in peirpheral blood smears in patients with ichthyosis is diagnostic for Chanarin Dorfman Syndrome. Since the initial case was reported by Dorfman in 1974, nearly 50 cases have been reported in the literature, and the majority were from Middle East countries. In this report we presented a 5 year old patient who admitted to our hospital for creatine kinase elevation and diagnosed as Chanarin Dorfman Syndrome with clinical and laboratory findings. [Cukurova Med J 2015; 40(3.000: 614-618

Hammering towards QED

Directory of Open Access Journals (Sweden)

Jasmin C. Blanchette

2016-01-01

Full Text Available This paper surveys the emerging methods to automate reasoning over large libraries developed with formal proof assistants. We call these methods hammers. They give the authors of formal proofs a strong "one-stroke" tool for discharging difficult lemmas without the need for careful and detailed manual programming of proof search.The main ingredients underlying this approach are efficient automatic theorem provers that can cope with hundreds of axioms, suitable translations of richer logics to their formalisms, heuristic and learning methods that select relevant facts from large libraries, and methods that reconstruct the automatically found proofs inside the proof assistants.We outline the history of these methods, explain the main issues and techniques, and show their strength on several large benchmarks. We also discuss the relation of this technology to the QED Manifesto and consider its implications for QED-style efforts.

Water hammer caused by closure of turbine safety spherical valves

Science.gov (United States)

Karadžić, U.; Bergant, A.; Vukoslavčević, P.

2010-08-01

This paper investigates water hammer effects caused by closure of spherical valves against the discharge. During the first phase of modernisation of Perućica high-head hydropower plant (HPP), Montenegro, safety spherical valves (inlet turbine valves) have been refurbished on the first two Pelton turbine units. The valve closure is controlled by the valve actuator (hydraulic servomotor). Because the torque acting on the valve body is dependent on flow conditions the valve closing time may vary significantly for different flow velocities (passive valve). For the passive valve the torques acting on the valve body should be considered in the valve model. The valve closing time results from numerical simulation. On the contrary, for the active valve the valve closing time is assumed prior to simulation. The spherical valve boundary condition is incorporated into the method of characteristics (MOC) algorithm. The staggered (diamond) grid in applying the MOC is used in this paper. The passive valve boundary condition is described by the water hammer equations, the valve equation that relates discharge to pressure head drop and the dynamic equation of the valve body motion (torque equation). The active valve boundary condition is described by the first two equations, respectively. Standard quasi-steady friction model is used for estimating friction losses in plant's tunnel and penstocks. Numerical results using both the active and the passive spherical valve models are compared with results of measurements. It has been found that the influence of flow conditions on the spherical valve closing time is minor for the cases considered. Computed and measured results agree reasonably well.

Water hammer caused by closure of turbine safety spherical valves

International Nuclear Information System (INIS)

Karadzic, U; Vukoslavcevic, P; Bergant, A

2010-01-01

This paper investigates water hammer effects caused by closure of spherical valves against the discharge. During the first phase of modernisation of Perucica high-head hydropower plant (HPP), Montenegro, safety spherical valves (inlet turbine valves) have been refurbished on the first two Pelton turbine units. The valve closure is controlled by the valve actuator (hydraulic servomotor). Because the torque acting on the valve body is dependent on flow conditions the valve closing time may vary significantly for different flow velocities (passive valve). For the passive valve the torques acting on the valve body should be considered in the valve model. The valve closing time results from numerical simulation. On the contrary, for the active valve the valve closing time is assumed prior to simulation. The spherical valve boundary condition is incorporated into the method of characteristics (MOC) algorithm. The staggered (diamond) grid in applying the MOC is used in this paper. The passive valve boundary condition is described by the water hammer equations, the valve equation that relates discharge to pressure head drop and the dynamic equation of the valve body motion (torque equation). The active valve boundary condition is described by the first two equations, respectively. Standard quasi-steady friction model is used for estimating friction losses in plant's tunnel and penstocks. Numerical results using both the active and the passive spherical valve models are compared with results of measurements. It has been found that the influence of flow conditions on the spherical valve closing time is minor for the cases considered. Computed and measured results agree reasonably well.

Water hammer caused by closure of turbine safety spherical valves

Energy Technology Data Exchange (ETDEWEB)

Karadzic, U; Vukoslavcevic, P [Faculty of Mechanical Engineering, University of Montenegro Dzordza Vasingtona nn, Podgorica, 81000 (Montenegro); Bergant, A, E-mail: uros.karadzic@ac.m [LitostrojPower d.o.o., Litostrojska 50, Ljubljana, 1000 (Slovenia)

2010-08-15

This paper investigates water hammer effects caused by closure of spherical valves against the discharge. During the first phase of modernisation of Perucica high-head hydropower plant (HPP), Montenegro, safety spherical valves (inlet turbine valves) have been refurbished on the first two Pelton turbine units. The valve closure is controlled by the valve actuator (hydraulic servomotor). Because the torque acting on the valve body is dependent on flow conditions the valve closing time may vary significantly for different flow velocities (passive valve). For the passive valve the torques acting on the valve body should be considered in the valve model. The valve closing time results from numerical simulation. On the contrary, for the active valve the valve closing time is assumed prior to simulation. The spherical valve boundary condition is incorporated into the method of characteristics (MOC) algorithm. The staggered (diamond) grid in applying the MOC is used in this paper. The passive valve boundary condition is described by the water hammer equations, the valve equation that relates discharge to pressure head drop and the dynamic equation of the valve body motion (torque equation). The active valve boundary condition is described by the first two equations, respectively. Standard quasi-steady friction model is used for estimating friction losses in plant's tunnel and penstocks. Numerical results using both the active and the passive spherical valve models are compared with results of measurements. It has been found that the influence of flow conditions on the spherical valve closing time is minor for the cases considered. Computed and measured results agree reasonably well.

NOONAN SYNDROME – CASE REPORT

Directory of Open Access Journals (Sweden)

Milena Vujanović

2014-06-01

Full Text Available Noonan Syndrome is a rare, autosomal dominant disorder characterized by short stature, facial abnormalities, congenital heart defects and urogenital malformations. Ocular changes occur in 95% of patients and usually include hypertelorism, ptosis, refractive errors, strabismus, amblyopia, rarely nystagmus, colobomas, cataracts, optic nerve drusen. Case report: We present a case of a boy, 10 months old, referred by the pediatrician because of strabismus. During the general examination of the head and face, we noted that the ears were low-set, and the lower jaw was slightly smaller. Ophthalmological examination revealed hypertelorism, left eye esotropia, hyperopia, and optic disc pit. Other associated malformations were: dilatation of both pyelons, cryptorchidism, pulmonary stenosis. Genetic analysis confirmed the diagnosis of Noonan syndrome. The variety of clinical manifestations of this syndrome indicates that a multidisciplinary approach is necessary for diagnosis, treatment, and follow-up of these patients.

Studi Numerik Variasi Pemilihan Gas Accumulator Untuk Pencegahan Water Hammer Pada Sistem Perpipaan Sepanjang 1 Kilometer dan Debit Aliran 800 GPM

Directory of Open Access Journals (Sweden)

Anindika Bagus Pradana

2013-09-01

Full Text Available Sistem jaringan perpipaan sangat penting dalam menunjang produksi pada bidang industri. Jaringan perpipaan mengalami beberapa fenomena seperti distribusi fluida dan water hammer. Water hammer sering terjadi di daerah discharge pompa saat pengoperasian dan gagalnya beroperasinya pompa. Water hammer dapat merusak jaringan perpipaan. Fenomena water hammer dapat terjadi hampir di setiap sistem instalasi perpipaan. Fenomena ini mempunyai dampak buruk apabila sistem perpipaan tersebut tidak memperhatikan akibat dari water hammer. Fenomena dalam sistem perpipaan mempunyai dampak negatif dengan selang waktu tertentu, water hammer adalah fenomena dimana dampak yang ditimbulkan terjadi seketika itu juga. Penanggulangan yang tidak tepat terhadap dampak tersebut dapat mengakibatkan instalasi tersebut harus dimatikan (shutdown. Pada simulasi ini digunakan sistem instalasi perpipaan dengan panjang 1 kilometer dan debit aliran 800 gpm.Pada sistem instalasi ini memiliki rangkaian pompa tunggal yang dilengkapi dengan gas accumulator di sisi discharge pompa. Ketika terjadi perubahan flow rate yang menyebabkan pompa beroprasi atau gagal beroprasi akan menimbulkan fenomena water hammer.Penelitian dilakukan secara numerik menggunakan software AFT Impulse 4.0. Water hammer dapat diminimalisi dengan memasang gas accumulator pada daerah dekat discharge pompa. Variasi gas accumulator adalah gas accumulator merk NOK tipe AT 175-20 dengan volume maksimum 20 liter, tipe AT 210-60 dengan volume maksimum 60 liter dan tipe AT 230-120 dengan volume maksimum 100 liter. Hasil yang didapatkan pada simulasi menunjukan pada jarak 4 meter dari rumah pompa masing-masing P max dan P min  untuk sistem perpipaan dengan simulasi proses trip pompa tanpa proteksi water hammer adalah 1729 Kpa dan 381 Kpa, untuk sistem perpipaan dengan gas accumulator volume setting 20 liter adalah 1228 Kpa dan 927 Kpa, untuk sistem perpipaan dengan gas accumulator volume setting 60 liter adalah 1161 Kpa

Pfeiffer syndrome type 2: case report

Directory of Open Access Journals (Sweden)

Maria Kiyoko Oyamada

Full Text Available OBJECTIVE: To report on a case of Pfeiffer Syndrome, with a discussion of the diagnostic characteristics and features of disease types and the differential diagnosis. DESCRIPTION: The authors describe a newborn with cloverleaf skull, extreme bilateral exorbitism and choanal atresia, partial syndactyly of the second and third toes and broad medially-deviated big toes. The case reported was Pfeiffer Syndrome type 2, which usually has a poor prognosis. COMMENTS: Pfeiffer Syndrome is a clinically variable disorder and consists of an autosomal dominantly-inherited osteochondrodysplasia with craniosynostosis. It has been divided into three types. Type 1 is commonly associated with normal intelligence and generally good outcome. Types 2 and 3 generally have severe neurological compromise, poor prognosis, early death and sporadic occurrence. Potential for prolonged useful survival outcome can be achieved in some cases with early aggressive medical and surgical management according to recent literature.

Gorlin-goltz syndrome: a rare case.

Science.gov (United States)

Ganguly, Satyaki; Jaykar, Kranti C; Kumar, Rajesh; Jha, Abhijeet Kumar; Banerjee, P K

2015-01-01

Gorlin-Goltz syndrome or nevoid basal cell carcinoma syndrome is characterized by multiple basocellular epitheliomas, keratocysts in the jaws, bifid ribs, palmar and/or plantar pits and ectopic calcifications of the falx cerebri. We describe a case of Gorlin-Goltz syndrome illustrating the importance of a thorough examination including the examination of palms and soles and detailed investigations in a patient having lesions suggestive of basal cell carcinoma and multiple naevi.

Gorlin-Goltz Syndrome: A Rare Case

OpenAIRE

Ganguly, Satyaki; Jaykar, Kranti C; Kumar, Rajesh; Jha, Abhijeet Kumar; Banerjee, PK

2015-01-01

Gorlin-Goltz syndrome or nevoid basal cell carcinoma syndrome is characterized by multiple basocellular epitheliomas, keratocysts in the jaws, bifid ribs, palmar and/or plantar pits and ectopic calcifications of the falx cerebri. We describe a case of Gorlin-Goltz syndrome illustrating the importance of a thorough examination including the examination of palms and soles and detailed investigations in a patient having lesions suggestive of basal cell carcinoma and multiple naevi.

Percussive Augmenter of Rotary Drills for Operating as a Rotary-Hammer Drill

Science.gov (United States)

Aldrich, Jack Barron (Inventor); Bar-Cohen, Yoseph (Inventor); Sherrit, Stewart (Inventor); Badescu, Mircea (Inventor); Bao, Xiaoqi (Inventor); Scott, James Samson (Inventor)

2014-01-01

A percussive augmenter bit includes a connection shaft for mounting the bit onto a rotary drill. In a first modality, an actuator percussively drives the bit, and an electric slip-ring provides power to the actuator while being rotated by the drill. Hammering action from the actuator and rotation from the drill are applied directly to material being drilled. In a second modality, a percussive augmenter includes an actuator that operates as a hammering mechanism that drives a free mass into the bit creating stress pulses that fracture material that is in contact with the bit.

Case Report - Neonatal progeroid syndrome (Wiedemann ...

African Journals Online (AJOL)

Case Report - Neonatal progeroid syndrome (Wiedemann-Rautenstrauch syndrome) in an Egyptian child with premature loss of teeth, and café au lait skin ... pads in the suprabuttock areas, triangular face, pseudohydrocephalous, sparse scalp hair and eyebrows, prominent scalp veins, greatly widened anterior fontanels, ...

UO2-PuO2 critical experiments based on a coupled NJOY/AMPX-II/HAMMER-TECHNION system

International Nuclear Information System (INIS)

Fernandes, M.A.R.

1990-01-01

The performance of the HAMMER-TECHNION system in the criticality analysis of mixed oxide (UO sub(2)-PuO sub(2)) fuel pins clad with Zircaloy-2 and having light water as moderator was analyzed in this work. The basic nuclear data libraries for the HAMMER-TECHNION have been generated by processing the ENDF/B-IV and JENDL-2 nuclear data files with the NJOY system. The question of the effect of Plutonium resonances close to the thermal region on the average thermal parameters was addressed by creating a special version of the HAMMER-TECHNION system with the thermal energy cut-off at 1.855 eV. The final system effective multiplication factor was calculated with the CITATION code by using the homogeneized four-group cross sections generated by the HAMMER-TECHNION system. Results are shown for the original HAMMER-TECHNION thermal cut-off and for the one at 1.855 eV. Besides that, for some selected critical systems, the effect of the resonance interference among the resonances of the Uranium and Plutonium isotopes was addressed by using the ROLAIDS module of the AMPX-II system. The effect of the thermal energy cut-off on the integral parameters of the critical systems was not found to be of extreme importance. (author)

Gas-Induced Water-hammer Loads Calculation for Safety Related Systems

Energy Technology Data Exchange (ETDEWEB)

Lee, Seungchan; Yoon, Dukjoo [Korea Hydro and Nuclear Power Co., LTd, Daejeon (Korea, Republic of); Lee, Dooyong [Seoul National Univ., Seoul (Korea, Republic of)

2013-05-15

Of particular interest, gas accumulation can result in system pressure transient in pump discharge piping following a pump start. Consequently, this evolves into a gas-water, a water-hammer event and the accompanying force imbalances on the piping segments can be sufficient to challenge the piping supports and restraint. This paper describes an method performing to the water-hammer loads to determine the maximum loading that would occur in the piping system following the safety injection signal and to evaluate its integrity. For a given gas void volumes in the discharge piping, the result of the calculation shows the maximum loads of 18,894.2psi, which is smaller than the allowable criteria. Also, the maximum peak axial force imbalances acting on the support is 1,720lbf as above.

Gas-Induced Water-hammer Loads Calculation for Safety Related Systems

International Nuclear Information System (INIS)

Lee, Seungchan; Yoon, Dukjoo; Lee, Dooyong

2013-01-01

Of particular interest, gas accumulation can result in system pressure transient in pump discharge piping following a pump start. Consequently, this evolves into a gas-water, a water-hammer event and the accompanying force imbalances on the piping segments can be sufficient to challenge the piping supports and restraint. This paper describes an method performing to the water-hammer loads to determine the maximum loading that would occur in the piping system following the safety injection signal and to evaluate its integrity. For a given gas void volumes in the discharge piping, the result of the calculation shows the maximum loads of 18,894.2psi, which is smaller than the allowable criteria. Also, the maximum peak axial force imbalances acting on the support is 1,720lbf as above

Linear or Rotary Actuator Using Electromagnetic Driven Hammer as Prime Mover

Science.gov (United States)

Paine, Jeffrey S. N. (Inventor); Smith, Byron F. (Inventor); Sesler, Joshua J. (Inventor); Paine, Matthew T. (Inventor); McMahan, Bert K. (Inventor); McMahan, Mark C. (Inventor)

2018-01-01

We claim a hammer driven actuator that uses the fast-motion, low-force characteristics of an electro-magnetic or similar prime mover to develop kinetic energy that can be transformed via a friction interface to produce a higher-force, lower-speed linear or rotary actuator by using a hammering process to produce a series of individual steps. Such a system can be implemented using a voice-coil, electro-mechanical solenoid or similar prime mover. Where a typical actuator provides limited range of motion or low force, the range of motion of a linear or rotary impact driven motor can be configured to provide large displacements which are not limited by the characteristic dimensions of the prime mover.

[Clinical study of 12 cases with obstetric mirror syndrome].

Science.gov (United States)

Wu, Lin-lin; Wang, Chen-hong; Li, Zhi-quan

2012-03-01

To discuss the clinical features, management, pregnancy outcome and prognosis of obstetric mirror syndrome. The clinical data of 12 cases with obstetric mirror syndrome at Shenzhen Maternity and Child Healthcare Hospital from April 2008 to December 2010 were collected to retrospectively analyze the clinical features, management, pregnancy outcome and prognosis. (1) ETIOLOGY: 12 cases with obstetric mirror syndrome included 9 cases of Bart's hydrops fetalis, 2 cases with fetal complicated congenital cardiac anomalies, and 1 case of unknown etiology. (2) Gestational age at diagnosis and at delivery: gestational age at diagnosis ranged from 28 to 36 weeks [mean (31.5 ± 4.7) weeks], and gestational age at delivery ranged from 28(+3) to 38 weeks [mean (32.9 ± 2.9) weeks]. There were no significant differences between the gestational age at diagnosis and at delivery in consistence with severe preeclampsia group and mild preeclampsia group [(31.8 ± 2.3) weeks vs. (30.9 ± 7.2) weeks, (32.5 ± 2.3) weeks vs. (33.5 ± 3.9) weeks, P > 0.05]. (3) The patients with obstetric mirror syndrome can present a preeclampsia-like syndrome: maternal extremity edema in 12 cases, headache and visual disturbance in 1 case, proteinuria in 11 cases, elevated blood pressure in 5 cases, elevated uric acid in 9 cases, hypoproteinemia in 12 cases, elevated creatinine in 3 case, elevated liver enzyme in 1 case, thrombocytopenia in 2 cases. The major complications included 1 case of HELLP syndrome, acute pulmonary edema, placental abruption, amnionic fluid embolism, DIC respectively, 3 cases of acute kidney failure and 6 cases of postpartum hemorrhage. (4) Sonographic findings: 1) Hydrops fetalis: fetal ultrasound revealed pleural fluid, fetal ascites, skin edema, scalp edema, encephalocolele enlargement, hydropericardium and increased cardio-chest ratio. 2) Placenta megaly: the placental pathological examination revealed edematous and large in 12 cases. Placental thickness was beyond 4 cm in

A Rare Case of Acute Coronary Syndrome in a Patient With Turner Syndrome.

Science.gov (United States)

Kemaloglu, Tugba; Ozer, Nihat; Fikri Yapici, Mehmet

2016-05-01

In Turner syndrome, cardiovascular complications are the most important causes of early mortality. Congenital cardiovascular abnormalities are found in approximately one third of Turner syndrome patients. Developments in diagnosis and treatment have decreased the rate of mortality related to these abnormalities. In recent years, many papers have mentioned that coronary artery disease developing at early ages in patients with Turner syndrome causes sudden deaths. The patient, a 27-year-old female was admitted to the emergency room with chest pain at rest. She was diagnosed with Turner Syndrome in her teenage years due to amenorrhea. Patients with ECG changes and cardiac enzyme elevations were treated with acute coronary syndrome. The young woman with Turner Syndrome have several risk factors for early Coronary Artery Disease development. In such cases, dramatic results like sudden death or heart attack at an early age may occur in cases of insufficient follow-up and treatment.

Cases of Trichohepatoenteric Syndrome (Syndromic Diarrhea with Underlying Crohn’s Disease

Directory of Open Access Journals (Sweden)

Е. А. Roslavtseva

2015-01-01

Full Text Available Tricho-hepato-enteric syndrome (syndromic, phenotypic diarrhea, SD/THES is a rare inborn disease, which affects bowels. It is caused by the mutation of genes SKIV2L or TTC37. Manifestations include intrauterine hypotrophy, severe chronic diarrhea, which starts in infancy, characteristic facial features and hair growth abnormalities, immune disorders. There are data on two patients dealing with tricho-hepato-enteric syndrome with underlying Crohn’s disease. This is the first description of cases of aggravated tricho-hepatoenteric syndrome ever found in Russian medical literature. 

Gorlin-Goltz syndrome: A rare case

Directory of Open Access Journals (Sweden)

Satyaki Ganguly

2015-01-01

Full Text Available Gorlin-Goltz syndrome or nevoid basal cell carcinoma syndrome is characterized by multiple basocellular epitheliomas, keratocysts in the jaws, bifid ribs, palmar and/or plantar pits and ectopic calcifications of the falx cerebri. We describe a case of Gorlin-Goltz syndrome illustrating the importance of a thorough examination including the examination of palms and soles and detailed investigations in a patient having lesions suggestive of basal cell carcinoma and multiple naevi.

HAMOC: a computer program for fluid hammer analysis

International Nuclear Information System (INIS)

Johnson, H.G.

1975-12-01

A computer program has been developed for fluid hammer analysis of piping systems attached to a vessel which has undergone a known rapid pressure transient. The program is based on the characteristics method for solution of the partial differential equations of motion and continuity. Column separation logic is included for situations in which pressures fall to saturation values

Reversible hemispheric hypoperfusion in two cases of SMART syndrome.

Science.gov (United States)

Wai, Karmen; Balabanski, Anna; Chia, Nicholas; Kleinig, Timothy

2017-09-01

Stroke-like migraine attacks after radiation therapy (SMART) syndrome manifests as prolonged episodes of cortical dysfunction, years after cranial irradiation. We present two cases demonstrating reversible hemispheric hypoperfusion. Case 1 presented with left hemispheric symptoms following previous similar episodes. CT perfusion (CTP) demonstrated reversible hemispheric hypoperfusion; subsequent investigations were consistent with SMART syndrome. Case 2 presented following the third episode of a hemispheric syndrome with near-identical CTP abnormalities. L-arginine was administered with rapid reversal of clinical and CTP abnormalities. We conclude that SMART syndrome may demonstrate significant hypoperfusion on hyperacute CTP without subsequent infarction. Impaired cerebrovascular autoregulation probably contributes to cortical dysfunction in SMART syndrome. L-arginine warrants investigation as a potential treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Churg-strauss syndrome: a case report.

Science.gov (United States)

Zhdan, Vyacheslav М; Kitura, Yevdokiia М; Kitura, Oksana Ye; Babanina, Maryna Yu; Tkachenko, Maksym V; Lebid, Volodymyr G

A clinical case of Churg-Strauss syndrome has been reported on the 53-year-old female patient Ts. with bronchial asthma and allergic rhinitis. The main clinical signs and syndromes depending on the stage of the disease are presented, as well as therapeutic treatment of patients with this disease.

Impact of pipes networks simplification on water hammer phenomenon

Indian Academy of Sciences (India)

Simplification of water supply networks is an indispensible design step to make the original network easier to be analysed. The impact of networks' simplification on water hammer phenomenon is investigated. This study uses two loops network with different diameters, thicknesses, and roughness coefficients. The network is ...

A Case of Male Goltz Syndrome

Directory of Open Access Journals (Sweden)

Bhaswati Ghoshal

2012-01-01

Full Text Available We present the case of a boy with a clinical diagnosis of Goltz syndrome (focal dermal hypoplasia, a rare genodermatosis characterized by widespread dysplasia of mesodermal and ectodermal tissues. A 9-year-old male patient with Goltz syndrome presented with typical skin lesions along with progressive dimness of vision and mental retardation since birth. It is inherited in an X-linked dominant fashion and is normally lethal in male patients, and so very few male patients, like the index case, have been reported.

Case Report: Cervical Klippel-Feil syndrome predisposing an ...

African Journals Online (AJOL)

Case Report: Cervical Klippel-Feil syndrome predisposing an elderly African man to central cord myelopathy following minor trauma. ... unique presentation of this case of Klippel-Feil syndrome further supports the impression that following fusion (congenital or acquired) of one segment of the spinal column, hypermobility of ...

Cotard’s Syndrome: Two Cases of Self-Starvation

Directory of Open Access Journals (Sweden)

Bruno Gonçalves Teixeira

2015-11-01

Full Text Available Background: Cotard´s syndrome is a relatively rare condition characterized by various degrees of nihilist delusions, often in the form of self-negation. Aims: To report two cases of Cotard’s syndrome associated with self-starvation and to review the concept and clinical features of the condition. Methods: Two clinical cases of the syndrome were obtained and a literature review of the theme was shortly surveyed. Results and Conclusions: The first case is about a woman who believed that her esophagus and stomach were glued. She was treated with sertraline, mirtazapine and risperidone with good results. The second case describes a man who believed his throat was burnt and he had no internal organs. He was treated with clomipramine and risperidone showing great improvement. This syndrome is a nosological and clinical entity that should not be forgotten. It is essential to provide an urgent and adequate therapeutic approach to these patients.

Counterevidence to the ion hammering scenario as a driving force for the shape elongation of embedded nanoparticles

Science.gov (United States)

Amekura, H.; Okubo, N.; Tsuya, D.; Ishikawa, N.

2017-08-01

Counterevidence is provided in the ion-hammering scenario as a driving force for the shape elongation of embedded nanoparticles (NPs) under swift heavy ion irradiation (SHII). Ion-induced compaction and the hammering, which are both induced in silica under SHII, dominate at low and high fluences, respectively, causing a crossover between them around a fluence of ˜4 × 1012 ions/cm2. Nevertheless, the shape elongation of NPs detected by the optical dichroism exhibits nearly linear dependence in a wide fluence range between ˜1 × 1011 and 2 × 1013 ions/cm2, indicating that the hammering does not play an important role.

H Syndrome: A case report and review of literature

Directory of Open Access Journals (Sweden)

Dilip Meena

2018-01-01

Full Text Available H syndrome is a rare autosomal recessive syndrome characterised by constellation of clinical features and systemic manifestations including cutaneous hyperpigmentation, hypertrichosis, hepatosplenomegaly, hearing loss, heart anomalies, hypogonadism, hyperglycaemia, low height, and hallux valgus. We report a case of this syndrome with typical clinical findings. We report this case citing the rarity of this uncommon entity.

H Syndrome: A Case Report and Review of Literature

Science.gov (United States)

Meena, Dilip; Chauhan, Payal; Hazarika, Neirita; Kansal, Naveen Kumar

2018-01-01

H syndrome is a rare autosomal recessive syndrome characterised by constellation of clinical features and systemic manifestations including cutaneous hyperpigmentation, hypertrichosis, hepatosplenomegaly, hearing loss, heart anomalies, hypogonadism, hyperglycaemia, low height, and hallux valgus. We report a case of this syndrome with typical clinical findings. We report this case citing the rarity of this uncommon entity. PMID:29527032

Vestibular dysfunction in Turner syndrome: a case report.

Science.gov (United States)

Baxter, Michael; Agrawal, Yuri

2014-02-01

Turner syndrome is a well-known cause of sensorineural hearing loss, and the lack of estrogen has been implicated in cochlear dysfunction. It has never been associated with vestibular dysfunction. We report a case of a patient with Turner syndrome who was found to have bilateral vestibular dysfunction based on video-oculography (VOG) testing. A single patient with a history of Turner syndrome who was found to have significant bilateral vestibular dysfunction. After noticing a deficit in the vestibulo-ocular reflexes on qualitative horizontal head impulse examination, the patient underwent VOG testing. VOG testing quantatively measures angular vestibulo-ocular reflex (AVOR) gain in the horizontal semicircular canal plane. AVOR gain represents the eye movement response to a head movement; in normal individuals the eye movement is fully compensatory and gain values are close to unity. VOG results showed AVOR gains of 0.29 and 0.36 on the right and left sides, respectively. We have presented a case of a woman with Turner syndrome with asymptomatic vestibular dysfunction demonstrated with VOG testing. Although there is a documented relationship between Turner syndrome and sensorineural hearing loss, there are no previous studies or case reports linking Turner syndrome and vestibular dysfunction. Additional research and added vigilance in monitoring Turner syndrome patients may be warranted.

Project T100 -- Hazardous Materials Management and Emergency Response Training Center (HAMMER)

International Nuclear Information System (INIS)

Norton, C.E.

1994-01-01

The scope of this Quality Assurance Program Plan (QAPP) is to provide a system of Quality Assurance reviews and verifications on the design and construction of the Hazardous Materials Management and Emergency Response (HAMMER) Training Center, project 95L-EWT-100 at Hanford. The reviews and verifications will be on activities associated with design, procurement, and construction of the HAMMER project which includes, but is not limited to earthwork, placement of concrete, laying of rail, drilling of wells, water and sewer line fabrication and installation, communications systems, fire protection/detection systems, line tie-ins, building and mock-up (prop) construction, electrical, instrumentation, pump and valves and special coatings

Conundrums in neurology: diagnosing serotonin syndrome - a meta-analysis of cases.

Science.gov (United States)

Werneke, Ursula; Jamshidi, Fariba; Taylor, David M; Ott, Michael

2016-07-12

Serotonin syndrome is a toxic state, caused by serotonin (5HT) excess in the central nervous system. Serotonin syndrome's main feature is neuro-muscular hyperexcitability, which in many cases is mild but in some cases can become life-threatening. The diagnosis of serotonin syndrome remains challenging since it can only be made on clinical grounds. Three diagnostic criteria systems, Sternbach, Radomski and Hunter classifications, are available. Here we test the validity of four assumptions that have become widely accepted: (1) The Hunter classification performs clinically better than the Sternbach and Radomski criteria; (2) in contrast to neuroleptic malignant syndrome, the onset of serotonin syndrome is usually rapid; (3) hyperthermia is a hallmark of severe serotonin syndrome; and (4) serotonin syndrome can readily be distinguished from neuroleptic malignant syndrome on clinical grounds and on the basis of medication history. Systematic review and meta-analysis of all cases of serotonin syndrome and toxicity published between 2004 and 2014, using PubMed and Web of Science. Two of the four assumptions (1 and 2) are based on only one published study each and have not been independently validated. There is little agreement between current criteria systems for the diagnosis of serotonin syndrome. Although frequently thought to be the gold standard for the diagnosis of the serotonin syndrome, the Hunter criteria did not perform better than the Sternbach and Radomski criteria. Not all cases seem to be of rapid onset and only relatively few cases may present with hyperthermia. The 0 differential diagnosis between serotonin syndrome and neuroleptic malignant syndrome is not always clear-cut. Our findings challenge four commonly made assumptions about serotonin syndrome. We propose our meta-analysis of cases (MAC) method as a new way to systematically pool and interpret anecdotal but important clinical information concerning uncommon or emergent phenomena that cannot be

A case of possible Kounis syndrome as a complication of scombroid syndrome

Directory of Open Access Journals (Sweden)

Stefano Rusconi

2017-11-01

Full Text Available Kounis syndrome is defined as the concurrence of acute coronary syndromes such as coronary spasm or acute myocardial infarction with conditions associated with activation of inflammatory mediators such histamine, arachidonic acid and various cytokines and chemokines. Recently, a variety of unusual etiologies have been reported, including scombroid syndrome. We present a case of a woman without previous history of cardiac diseases or cardiovascular risk factors, who presented to emergency department after the onset of flushing, asthenia, palpitations, burning sensation in the mouth having just eaten tuna. The electrocardiogram revealed a sinus tachycardia with diffuse ST segment depression. After therapy, in a short time symptoms recovered and a second electrocardiogram no longer showed any ST changes. These electrocardiographic changes observed in our case were probably due to transitory coronary vasospasm as described in type I variant of Kounis syndrome.

THE LEVEL AND AGE DYNAMICS OF SPORTS ACHIEVEMENTS OF ATHLETES-VETERANS OF THE HAMMER THROW

Directory of Open Access Journals (Sweden)

Ivanova Natalya Dmitrievna

2013-03-01

Full Text Available The article presents the records of the world and Russian athletes veterans in the hammer throw, starting with the age group 35-39 years and up to age group 100-104 years, and a comparison of the records of veterans subject to an age factor and of the high scores of athletes in the current sports. The aim of the work is to analyze the level and dynamics of the records of the world and Russian athletes, veterans in the hammer throw in each five-year group starting with the age group 35-39 years and up to age group 100-104 years. The novelty of the work consists in comparison of the records of the world and Russia in the hammer throw active athletes and records of veterans with the amendment to the age factor. Analysis of the level and age dynamics of sports achievements of domestic and foreign athletes-throwers older age groups. In the course of the research it is established, that in the throwing hammer, decreasing absolute (without regard to the age factor results, which is largely due to the natural age-related changes in the organism of athletes. Records of the world athletes-veterans compared with the records of active athletes and the transition from each of the five-year group in the following, decline on average in men by 10,0%, among women by 19,3%, in spite of the fact that the weight of the shells in the hammer throw with age decreases. Presented the reasons for the backwardness of Russian athletes older than 35 years of foreign veterans.

[Case of posterior reversible encephalopathy syndrome caused by Fisher syndrome].

Science.gov (United States)

Yokoi, Katsunori; Ando, Tetsuo; Kawakami, Osamu

2018-01-26

This report presents a case of a 71-year-old woman with Fisher syndrome who had posterior reversible encephalopathy syndrome (PRES) before the initiation of intravenous immunoglobulin (IVIg) treatment. She had symptoms of common cold 2 weeks before the onset of PRES. On the day of the onset, she began to stagger while walking. On day 2, she developed hypertension, vision impairment, and limb weakness and was admitted to the hospital. On day 3, she was provided steroid pulse therapy. On day 4, she developed convulsions and right imperfection single paralysis and was transferred to the our hospital. During the transfer, the patient was conscious. Her blood pressure was high at 198/107 mmHg. She had mild weakness in her limbs and face, light perception in both eyes, dilation of both pupils, total external ophthalmoplegia, no tendon reflexes, and limb and trunk ataxia. We diagnosed PRES because of the high signal intensities observed on T 2 -weighted MRI on both sides of the parietal and occipital lobes. We also diagnosed Fisher syndrome because of a positive anti-GQ1b immunoglobulin G antibody test and albuminocytologic dissociation in the cerebrospinal fluid. PRES showed prompt improvement with antihypertensive therapy, whereas Fisher syndrome slowly improved over a course of 2 months. This case is the first report of PRES without IVIg suggesting that Fisher syndrome induces hypertension and causes PRES.

IMPACT OF ROCK HARDNESS ON FRAGMENTATION BY HYDRAULIC HAMMER AND CRUSHING IN JAW CRUSHER

Directory of Open Access Journals (Sweden)

Trpimir Kujundžić

2008-12-01

Full Text Available The physical and mechanical characteristics of intact rocks depend on the way of their formation, sustained deformations and the process of wearing a specific rock has been exposed to. These characteristics have a rather high influence on the technological process of extraction and dressing of mineral raw materials. However, the mechanical characteristics of rocks due to use of explosives for their extraction in the open pit have a more significant impact. The rock blocks extracted by blasting which are larger than the opening of the primary crusher are usually fragmented by hydraulic hammer. The paper presents the results of the testing of impact of rock hardness on fragmentation of rocks by means of hydraulic hammer and during crushing in jaw crusher. The testing was carried out on the rock samples from five quarries. According to the obtained results the hardness has a considerably larger impact on the fragmentation energy by hydraulic hammer than on the crushing energy in jaw crusher.

Evaluation of SPT energy for Donut and Safety hammers using CPT measurements in Egypt

Directory of Open Access Journals (Sweden)

Rami M. El-Sherbiny

2013-12-01

Full Text Available Standard Penetration Test (SPT blow counts require correction prior to utilization in soil characterization and determination of properties and behavior. Among the most important corrections is the energy correction required to adjust the blow counts to 60% energy efficiency. However, there are no published data supporting commonly used value in Egypt. This paper presents an evaluation of the energy efficiency of the Donut and Safety hammers commonly used in Egypt and the associated energy correction factor. The energy efficiency is estimated by comparing N-values from the SPT to back-calculated N60 values from the Cone Penetration Test (CPT using well established correlations. Results indicate that the energy efficiency of the Donut hammer based on current practice in Egypt is approximately 50%. Thus, the back-calculated energy correction factor is approximately 0.82. For the Safety hammer, results indicate that the energy efficiency is approximately 60%, and the energy correction factor is approximately 1.0.

Water Hammer Modelling and Simulation by GIS

Directory of Open Access Journals (Sweden)

K. Hariri Asli

2012-01-01

Full Text Available This work defined an Eulerian-based computational model compared with regression of the relationship between the dependent and independent variables for water hammer surge wave in transmission pipeline. The work also mentioned control of Unaccounted-for-Water (UFW based on the Geography Information System (GIS for water transmission pipeline. The experimental results of laboratory model and the field test results showed the validity of prediction achieved by computational model.

Anophthalmia-Waardenburg syndrome: a report of three cases.

Science.gov (United States)

Suyugül, Z; Seven, M; Hacihanefioğlu, S; Kartal, A; Suyugül, N; Cenani, A

1996-04-24

We report on 2 Turkish families with children who had bilateral anophthalmia, upper and lower limb abnormalities, mental retardation and consanguineous parents. We have evaluated the 2 cases in the first family and the only case in the second as anophthalmia-Waardenburg syndrome. This is an extremely rare autosomal recessive syndrome.

Ex Vivo Evaluation of Cementless Acetabular Cup Stability Using Impact Analyses with a Hammer Instrumented with Strain Sensors.

Science.gov (United States)

Tijou, Antoine; Rosi, Giuseppe; Hernigou, Philippe; Flouzat-Lachaniette, Charles-Henri; Haïat, Guillaume

2017-12-27

The acetabular cup (AC) implant stability is determinant for the success of cementless hip arthroplasty. A method based on the analysis of the impact force applied during the press-fit insertion of the AC implant using a hammer instrumented with a force sensor was developed to assess the AC implant stability. The aim of the present study was to investigate the performance of a method using a hammer equipped with strain sensors to retrieve the AC implant stability. Different AC implants were inserted in five bovine samples with different stability conditions leading to 57 configurations. The AC implant was impacted 16 times by the two hammers consecutively. For each impact; an indicator I S (respectively I F ) determined by analyzing the time variation of the signal corresponding to the averaged strain (respectively force) obtained with the stress (respectively strain) hammer was calculated. The pull-out force F was measured for each configuration. F was significantly correlated with I S (R² = 0.79) and I F (R² = 0.80). The present method has the advantage of not modifying the shape of the hammer that can be sterilized easily. This study opens new paths towards the development of a decision support system to assess the AC implant stability.

Fluid-structure interaction with pipe-wall viscoelasticity during water hammer

NARCIS (Netherlands)

Keramat, A.; Tijsseling, A.S.; Hou, Q.; Ahmadi, A.

2011-01-01

Fluid-structure interaction (FSI) due to water hammer in a pipeline which has viscoelastic wall behaviour is studied. Appropriate governing equations are derived and numerically solved. In the numerical implementation of the hydraulic and structural equations, viscoelasticity is incorporated using

Fluid-structure interaction with pipe-wall viscoelasticity during water hammer

NARCIS (Netherlands)

Keramat, A.; Tijsseling, A.S.; Hou, Q.; Ahmadi, A.

2012-01-01

Fluid–structure interaction (FSI) due to water hammer in a pipeline which has viscoelastic wall behaviour is studied. Appropriate governing equations are derived and numerically solved. In the numerical implementation of the hydraulic and structural equations, viscoelasticity is incorporated using

A case of Wolf-Hirschhorn syndrome and hypoplastic left heart syndrome.

Science.gov (United States)

von Elten, Kelley; Sawyer, Taylor; Lentz-Kapua, Sarah; Kanis, Adam; Studer, Matthew

2013-06-01

Wolf-Hirschhorn Syndrome (WHS) is a genetic syndrome that includes a typical facial appearance, mental retardation, growth delay, seizures, and congenital cardiac defects. A deletion of the terminal band of the short arm of chromosome 4, with a breakpoint at the 4p15 to 4p16 region, is the most common genetic mutation causing WHS. Congenital heart disease associated with WHS typically includes atrial and ventricular septal defects, though there are a few case reports of associated complex congenital heart disease. Here we report a case of an infant with a large 4p deletion, with a breakpoint at the 4p12 region, and hypoplasic left heart syndrome. We discuss a possible link between the size of the chromosomal deletion in WHS and the severity of the cardiac defect.

Lowe syndrome: case report

Directory of Open Access Journals (Sweden)

Eva Bahor

2018-03-01

Full Text Available Lowe syndrome is a rare X-linked multisystemic disorder, caused by mutation of the OCRL gene which encodes OCRL-1 protein. The disease is characterized by the triad of congenital cataracts, intellectual disability, and Fanconi-like proximal renal tubular dysfunction. Lifespan is short due to end-stage renal disease and other earlier complications and it rarely exceeds 40 years. The treatment is symptomatic, aimed at improving the clinical evolution of the patients and postpone the onset of terminal renal disease. The paper describes a case of a boy with Lowe syndrome with a novel genetic mutation.

A fatal case of Perthes syndrome

Directory of Open Access Journals (Sweden)

Jérôme Jobé

2013-01-01

Full Text Available Perthes syndrome, or traumatic asphyxia, is a clinical syndrome associating cervicofacial cyanosis with cutaneous petechial haemorrhages and subconjonctival bleeding resulting from severe sudden compressive chest trauma. Deep inspiration and a Valsalva maneuver just prior to rapid and severe chest compression, are responsible for the development of this syndrome. Current treatment is symptomatic: urgent relief of chest compression and cardiopulmonary resuscitation if needed. Outcome may be satisfactory depending on the duration and severity of compression. Prolonged thoracic compression may sometimes lead to cerebral anoxia, irreversible neurologic damage and death. We report a fatal case of Perthes syndrome resulting from an industrial accident.

Adult polysplenia syndrome. A case report

International Nuclear Information System (INIS)

Usamentiaga, E.; Garcia-Valtuille, R.; Abascal, F.; Artiz, A.

1997-01-01

Polysplenia syndrome is a rare combination of congenital anomalies. It includes in a variable range: abdominal heterotaxy with multiples splenic nodules on the right side, cardiopulmonary anomalies and incomplete development of the inferior vena cava. We present the findings of a case of polysplenia syndrome performed by CT in an Adult asyntomatic patient. 11 refs

Tropical diabetic hand syndrome: a case report.

Science.gov (United States)

Yeika, Eugene Vernyuy; Tchoumi Tantchou, Jacques Cabral; Foryoung, Joyce Bei; Tolefac, Paul Nkemtendong; Efie, Derrick Tembi; Choukem, Siméon Pierre

2017-02-13

Tropical diabetic hand syndrome describes a complex hand sepsis affecting patients with diabetes across the tropics and often results from a trivial hand trauma. The clinical presentation of this syndrome is variable and ranges from localised swelling and cellulitis, with or without ulceration of the hand to progressive fulminant hand sepsis, and gangrene affecting the entire limb which may be fatal. Tropical diabetic hand syndrome could lead to permanent disability and death as a result of delay in presentation, late diagnosis and late medical and surgical intervention. This indexed case acts as an eye opener for physicians to the existence of this hand sepsis. We report the case of a 57 year-old black African female diabetic who was referred to our centre for the management of a suppurating ulcer and swelling of the left hand of two weeks duration. On examination and work-up, the patient was found to have Lawal Group III left diabetic hand syndrome and was managed with parenteral antibiotics, radical debridement and the hand was eventually amputated. She died 7 days following amputation from overwhelming sepsis. Though tropical diabetic hand syndrome is a relatively rare complication of diabetes, it can be fatal as in this case report. Early diagnosis and proper management would yield better outcome. Initial management should include aggressive intravenous broad-spectrum antibiotics with anaerobic coverage. Classification of tropical diabetic hand syndrome will assist physicians and surgeons in decision making, proper management and easy communication.

Current experience and a new modeling on water hammer due to steam condensation in PWR secondary system

International Nuclear Information System (INIS)

Kawanishi, K.; Kasahara, J.; Ueno, T.; Suzuta, T.

1998-01-01

There have been possibilities to occur water hammer in pipelines of turbine system for nuclear or fossil fuel power plants. According to the NUREG report, approximately 150 events have been reported since 1969, we also have an experience recently. Water hammer occurs due to sudden steam condensation with pressure pulse. This kind of pressure pulses has been made by alternative producing and condensing of steam slug in the pipe and its frequency relates subcooling and pipe structures. This paper presents our current experience on water hammer with some experimental studies. The present experiment has been performed to obtain the data base for evaluating the pressure pulses. The test pipe was horizontal tubes with dead end connected to vertical tube which simulating drain line in PWR secondary system. The main results are shown as follows; Magnitude of pressure pulse depends drain velocity and initial subcooling. Pipe structure effects on the frequency and continual time of water hammer phenomenon. A new modeling for quantitative explanation of the phenomena is also presented

Research on water hammer forces caused by rapid growth of bubbles at severe accidents of water cooled reactors

International Nuclear Information System (INIS)

Inasaka, Fujio; Adachi, Masaki; Aya, Izuo

2004-01-01

At severe accidents of Water Cooled Reactors a great deal of gas is expected to be produced in a short time within the water of lower part of nuclear pressure vessel and containment vessel caused by hydrogen production with a metal water reaction and steam explosions with direct contact of melting core and water. Water hammer forces caused by rapid growth of bubbles shall work on the wall of containment vessel and affect its integrity. Coherency of water block movement is not clear, whether simultaneous or in the same direction. Water block behavior and water hammer forces caused by rapid growth of bubbles have been tested using a modified scale model and analyzed to obtain experimental correlated equation to estimate water block's rising distance and velocity from water hammer data. Numerical analysis using RELAP5-3D (Reactor Excursion and Leak Analysis Program) has been conducted to evaluate water hammer forces and makes clear its modifications needed. (T. Tanaka)

Experimental evaluation of ability of Relap5 and DRAKO to calculate water hammer with phase changes

International Nuclear Information System (INIS)

Marcinkiewicz, Jerzy; Adamkowski, Adam; Lewandowski, Mariusz

2007-01-01

Mechanical loadings on pipe systems caused by water hammer with phase changes make calculation of final forces difficult in nuclear power plants. The common procedure in Sweden is to calculate the water hammer loadings, according to the classical one-dimensional theory of liquid transient flow in pipeline, and then transfer the results to strength analyses of pipeline structure. This procedure assumes that there is quasi-steady response of the pipeline structure to pressure surges - no dynamic interaction between the fluid and the pipeline construction. The hydraulic loadings are calculated with 1-D so-called 'network' programs. Commonly used in Sweden are Relap5 (Mod3.2.2 and higher) and Drako. As a third party accredited inspection body INSPECTA NUCLEAR AB reviews calculations of water hammer loadings. An important question for the reviewer (and also for the users) is knowledge about their ability to calculate the dynamic loadings. While the ability of Relap5 and DRAKO to calculate water hammer without phase changes is relatively well investigated the skills of the programs when phase changes are present need some more attention. The presented work shall be seen as an attempt to illustrate ability of Relap5, and Drako programs to calculate the water hammer loadings with phase changes. A special attention was paid to using of Relap5 for calculation of water hammer pressure surges (including some aspects of influence of discretisation of space on the calculation results). The calculations are compared with experimental results. The experiments have been conducted at a test rig designed and constructed at the Szewalski Institute of Fluid-Flow Machinery of the Polish Academy of Sciences (IMP PAN) in Gdansk, Poland. The comparison of calculated and measured pressures shows some differences, only the first pressure peak, occurring before evaporation is calculated quite exactly. All next coming pressure peaks differ slightly from the measured with respect to amplitude

[Usher syndrome: about a case].

Science.gov (United States)

Daoudi, Chama; Boutimzine, Noureddine; Haouzi, Samia El; Lezrek, Omar; Tachfouti, Samira; Lezrek, Mounir; Laghmari, Mina; Daoudi, Rajae

2017-01-01

Usher syndrome is a genetic disease resulting in double sensory deprivation (auditory and visual) called deafblindness. We report the case of a 50-year old patient, born to consanguineous parents, presenting with congenital deafness associated with normal vestibular function and pigmentary retinopathy responsible for decreased bilateral visual acuity occurred at the age of 16 years. This association composes Usher syndrome type 2, a rare autosomal recessive disorder. Cataract surgery allowed visual acuity improvement in this patient.

Tietze's syndrome: case report and literature review | Chuhwak ...

African Journals Online (AJOL)

The case report is on Tietze's syndrome – a disorder that is quite rare. Costochondritis has been thought to be synonymous with Tietze's syndrome until recently [2002] when costochondritis was differentiated from Tietze's syndrome. Costochondritis is inflammation of the costochondral joints without swelling. Tietze's ...

Case Of Iatrogenic Cushing's Syndrome By Topical Triamcinolone.

Science.gov (United States)

Zil-E-Ali, Ahsan; Janjua, Omer Hanif; Latif, Aiza; Aadil, Muhammad

2018-01-01

Cushing's syndrome is a collection of signs and symptoms due to hypercortisolism. Prolong use of topical steroid may cause this syndrome and suppression of hypothalamic and pituitary function, however such events are more common with oral and parenteral route. There are very few cases of Cushing's syndrome with a topical application amongst which triamcinolone is the rarest drug. We report a case of 11-year-old boy is presented who developed Cushing's disease by topical application. The child had body rashes for which the caregiver consulted a local quack, a topical cream of triamcinolone was prescribed. After application for three months, the patient became obese and developed a moon-like face. A thorough biochemical workup and diagnostic test for Cushing's disease was done to confirm. The following case report a dramatic example of development of the syndrome from chronic topical application of the least potent corticosteroid.

The hammer QSD-quick stop device for high speed machining and rubbing

Science.gov (United States)

Black, J. T.; James, C. R.

1980-01-01

A quick stop device (QSD) was designed for use in orthogonal machining and rubbing experiments. QSD's are used to obtain chip root samples that are representative of the deformation taking place during dynamic (actual) cutting conditions. These 'frozen' specimens are helpful in examining the plastic deformation that occurs in the regions of compression and shear which form the chip; the secondary shear at the tool-chip interface; and the nose ploughing/flank rubbing action which operates on the newly machined surface. The Hammer QSD employs a shear pin mechanism, broken by a flying hammer, which is traveling at the same velocity as the workpiece. The device has been successfully tested up to 6000 sfpm (30.48 m/sec).

Stylocarotid syndrome: A case report

Directory of Open Access Journals (Sweden)

Petrović Branko

2008-01-01

Full Text Available INTRODUCTION The American otolaryngologist Eagle was the first to describe styloid syndrome in 1937 and the syndrome was named after him (Eagle's syndrome. The original description of two separate syndromes is connected with his name: classical syndrome, which almost constantly occurs after tonsillectomy and carotid artery syndrome, which occurs without tonsillectomy and also in cases when stylohyoid complex compresses the carotid segments and perivascular sympathetic fibers. In the following years, two more syndromes were defined: stylohyoid and pseudostylohyoid, which according to their manifestations, correspond to the genuine classical form. CASE OUTLINE A 40-year old male is presented, with a history of 3-year duration of pains in the upper part of the left side of the neck, in the left eye and its surroundings. Pain occurrences were not regular. Throbbing pains were most often provoked by sudden head movements and neck compression. He was healthy until the onset of these problems. The findings of all examinations were normal. The applied prophylactic therapy, typical for cluster headache, was without any effect. On 64-MSCT (multislice computed tomography, the neck arteries did not show any intraluminal pathology. The styloid processes were of normal length. On the left side, the styloid process tip pressed the internal carotid artery disturbing its longitudinal axis. CONCLUSION In our presentation, the defined lengths of the styloid processes were normal. The medial angulation of the left styloid process was more expressed reaching 63.5 degrees (the right side angulation was normal. Persistent and throbbing pain in the region of the left eye with backward projection suggested compression on the internal carotid artery. Pains were most frequently provoked by head turning and neck compression. 64-MSCT diagnostics enabled us to determine the characteristics of styloid processes and their relation to the internal carotid artery. Improvement

Water hammer (with FSI): exact solution : parallelization and application

NARCIS (Netherlands)

Loh, K.; Tijsseling, A.S.

2014-01-01

The 1D fully coupled Fluid-Structure Interaction (FSI) model can adequately describe the water hammer effect on the fluid, and the structural behaviour of the pipe. This paper attempts to increase the capability of using an exact solution of the 1D FSI problem applied to a straight pipe with a

A Hybrid Resynthesis Model for Hammer-String Interaction of Piano Tones

Directory of Open Access Journals (Sweden)

Jensen Kristoffer

2004-01-01

Full Text Available This paper presents a source/resonator model of hammer-string interaction that produces realistic piano sound. The source is generated using a subtractive signal model. Digital waveguides are used to simulate the propagation of waves in the resonator. This hybrid model allows resynthesis of the vibration measured on an experimental setup. In particular, the nonlinear behavior of the hammer-string interaction is taken into account in the source model and is well reproduced. The behavior of the model parameters (the resonant part and the excitation part is studied with respect to the velocities and the notes played. This model exhibits physically and perceptually related parameters, allowing easy control of the sound produced. This research is an essential step in the design of a complete piano model.

Estimation of the effectiveness of the destruction of natural stone oversized by a hydraulic hammer

Directory of Open Access Journals (Sweden)

V.G. Kravets

2017-12-01

Full Text Available The experience of mining operations shows that even with the application of progressive methods of drilling, it is impossible to completely exclude the output of a large fraction (oversized. The percentage of oversized mass emissions from the blasting mass depending on the mining and geological conditions may vary from 5 to 20 percent. Catching an oversized piece into the receiving slit of the main crusher is associated with stopping the whole technological chain of the enterprise. Sharpening of oversized pieces of the work area during conducting of extraction or overturning works leads to a decrease in the efficiency of mining operations. Crushing of oversized materials to the required sizes can be carried out in an explosive way (by a bore or overhead charge or by non-explosive methods, most of which are based on mechanical destruction under the action of local dynamic stresses that cause stress exceeding the resistance of internal bonds in the rock. To date, manufacturers are offered many types of shock mechanisms, based on the transformation of various types of energy (from gravitational, to the energy of chemical processes into mechanical. For a number of reasons, mostly economic, to date, the most common way is the mechanical method of the destruction of oversized beams using hydraulic and hydro pneumatic hammer. That is why the work considers the main factors influencing the performance of the hydraulic hammer, among which – the specific energy consumption of the oversize and the main parameters of the hydraulic engine passport on the basis of the excavator. In the publication the power law of the hydraulic hammer changes in dependence of the size of the oversized. Also, the basic parameters of the JCB JS235 HD excavator passport are defined in the work with the use of the INDECO HP 1500 hammer hammer.

Case Report: A Rare Case Report of Frontal Lobe Syndrome

Directory of Open Access Journals (Sweden)

Morteza Nouri- Khajavi

2003-04-01

Full Text Available The frontal lobe syndrome is a permanent personality change disorder with characteristic clinical pictures, which followed by frontal lobes damage. Clinical picture include: Affective instability, recurrent aggressive behavior, impaired social judgment, apathy and undifferentiating or suspiciousness and paranoid ideations. According DSM-IV classification frontal lobe syndrome named personality change due to head trauma on Axis I. Herein we report a case of 46 years-old man, who has developed behavioral disturbances following head trauma, about 10 years ago. Main clinical figures in this case are apathy, avolition and, undifferentiating. Clinical pictures are constant during these 10 years. The diagnostic approach has been based on patient’s problems history which, has taken from his family, mental status examination, Neurological examination, Brain imaging and Neuropsychological assessments which related to frontal lobes function. Because of rarity & neglection due to mysterious function of frontal lobes, and also considering that personality change from previous level is prominent figure of this syndrome and also brain imaging findings, which compatible with clinical findings, with this aim, we have reported this case.

CLINICAL CASE OF PARKES-WEBER-RUBASHOV SYNDROME

Directory of Open Access Journals (Sweden)

Zhdonec S. V.

2018-03-01

Full Text Available A clinical case of one variant of congenital venous angiodysplasia – Parkes Weber-Rubashov syndrome of the right lower extremity is presented in the article. The features of its clinical presentation and diagnosis difficulties are described. The analysis of the scientific data and own clinical observation showed that Parkes Weber-Rubashov syndrome belongs to the rare congenital disease of the vascular system, in some cases with the absence of typical clinical manifestations and combination with other disorders of the venous system. The best method for diagnosing the syndrome is radiopaque arteriography. The separation of the patent’s arteriovenous fistulas is justified as a radical method of its surgical treatment.

CASE REPORT Moebius syndrome with macular hyperpigmentation ...

African Journals Online (AJOL)

Bilateral macular hyperpigmentation was detected in our patient on fundus examination which was not reported previously in Moebius syndrome cases. In addition there is hypoplasia of the right pectoralis major muscle. KEYWORDS Moebius syndrome; Macular hyperpigmentation; Pectoralis major muscle; Cranial nerves; ...

Sliding pressure control valve for pneumatic hammer drill

Science.gov (United States)

Polsky, Yarom [Albuquerque, NM

2011-08-30

A pneumatic device control apparatus and method comprising a ported valve slidably fitted over a feed tube of the pneumatic device, and using a compliant biasing device to constrain motion of the valve to provide asymmetric timing for extended pressurization of a power chamber and reduced pressurization of a return chamber of the pneumatic device. The pneumatic device can be a pneumatic hammer drill.

Cavitation luminescence in a water hammer: Upscaling sonoluminescence

Science.gov (United States)

Su, C.-K.; Camara, C.; Kappus, B.; Putterman, S. J.

2003-06-01

Oscillatory acceleration and deceleration of a column of water leads to a pipe hammer as well as cavitation. With a small amount of xenon gas dissolved in the water, we can detect a stream of predominantly ultraviolet subnanosecond flashes of light which are attributed to collapsing bubbles. The observed emission can exceed 108 photons for a single collapse and has a peak power over 0.4 W.

Water hammer with fluid-structure interaction in thick-walled pipes

NARCIS (Netherlands)

Tijsseling, A.S.

2007-01-01

A one-dimensional mathematical model is presented which describes the acoustic behaviour of thick-walled liquid-filled pipes. The model is based on conventional water-hammer and beam theories. Fluid–structure interaction (FSI) is taken into account. The equations governing straight pipes are derived

Marshall-smith syndrome: case report

International Nuclear Information System (INIS)

Kim, Jin Yong; Lee, Shi Kyung; Cho, In Chul; Han, Chun Hwan

2002-01-01

Marshall-smith syndrome is a rare disease, with about 29 cases reported to date. It is characterized by accelerated bony growth and maturation, phalangeal abnormalities (wide middle and narrow distal phalanges), unusual facial features (prominent eyes, bluish sclerae, coarse eyebrows, an upturned nose, hypoplastic facial bones, and shallow orbits), failure to thrive, respiratory difficulties, and psychomotor retardation. This report of the radiologic findings of Marshall-smith syndrome is as, for as we know, the first to be published in Korea

Marshall-Smith syndrome: case report

International Nuclear Information System (INIS)

Kim, Jin Yong; Lee, Shi Kyung; Cho, In Chul; Han, Chun Hwan

2002-01-01

Marshall-Smith syndrome is a rare disease, with about 29 cases reported to date. It is characterized by accelerated bony growth and maturation, phalangeal abnormalities (wide middle and narrow distal phalanges), unusual facial features (prominent eyes, bluish sclerae, coarse eyebrows, an upturned nose, hypoplastic facial bones, and shallow orbits), failure to thrive, respiratory difficulties, and psychomotor retardation. This report of the radiologic findings of Marshall-Smith syndrome is, as for as we know, the first to be published in Korea

Short bowel syndrome presenting with re-feeding syndrome in a Han Chinese patient: a case report

Directory of Open Access Journals (Sweden)

Xie Ying

2012-05-01

Full Text Available Abstract Introduction Re-feeding syndrome is common in patients with long-term starvation. To the best of our knowledge this case is the first to report a patient with short bowel syndrome developing re-feeding syndrome 12 years after the bowel resection. Case presentation A 33-year-old Chinese Han man underwent small bowel resection leaving only 40 cm of bowel, without an ileocecal valve, 12 years previously. At that time he was weaned from total parenteral nutrition and had a normal diet. He later developed features of severe malnutrition, and when parenteral nutrition was given, he developed re-feeding syndrome. Conclusion Although re-feeding syndrome is a common complication in patients with any kind of nutritional support, and known to us for many years, high risk patients still need more attention and monitoring. Re-feeding syndrome in this case was not only a macronutrients deficiency but also a micronutrient deficient, and prompt supplement therapy and organ function support proved to be successful.

Seckel syndrome: a report of a case.

Science.gov (United States)

Ramalingam, K; Kaliyamurthy, S D; Govindarajan, M; Swathi, S

2012-01-01

Seckel syndrome, first defined by Seckel in 1960, is a rare (incidence 1:10,000), genetically heterogeneous autosomal recessive disorder presenting at birth. This syndrome is characterized by a proportionate dwarfism of prenatal onset, a severe microcephaly with a "bird-headed" like appearance (beaked nose, receding forehead, prominent eyes, and micrognathia), and mental retardation. The significance of dental alterations in this syndrome resides in the defect, hypoplastic enamel, being limited to the primary dentition; in most instances the second primary molar tooth is not affected. A case of the Seckel syndrome is presented.

Ectrodactyly, ectodermal dysplasia, and cleft lip/palate syndrome: A case report of "Incomplete syndrome"

Directory of Open Access Journals (Sweden)

P K Shivaprakash

2012-01-01

Full Text Available Ectrodactyly, ectodermal dysplasia, and cleft lip/palate (EEC is a rare syndrome having ectrodactyly, ectodermal dysplasia, and cleft lip/palate. So far, very few cases have been reported in literature. However, we report a case of incomplete EEC syndrome having ectrodactyly and cleft lip and palate with absence of signs of ectodermal dysplasia with no other systemic anomalies. Other feature noted is the syndactyly of toes which is reported rarely in this syndrome. A multidisciplinary approach for treatment is needed which is co-ordinated by pedodontist or pediatrician.

Coffin-Siris syndrome with Mayer-Rokitansky-Küster-Hauser syndrome: a case report

OpenAIRE

Shukla Umesh; Yadav Dinesh K; Goyal Deepak; Sethi Sidharth K

2010-01-01

Abstract Introduction We report the case of an unusual association of Coffin-Siris syndrome with Mayer-Rokitansky-Küster-Hauser syndrome. This association has never previously been reported in the medical literature. Case presentation A nine-year-old Indian girl was referred to our hospital for growth retardation, mental retardation, lax joints, generalized hypertrichosis, and hypoplastic fifth fingernails and toenails. A thorough medical examination and evaluation revealed she had phenotypic...

Atypical presentation of HELLP syndrome: clinical case report

Directory of Open Access Journals (Sweden)

Juan Manuel Tobar Parra

2017-12-01

Full Text Available Objective: To describe a case of HELLP syndrome with atypical presentation form. Background: HELLP syndrome is a complication of preeclampsia, characterized by: haemolysis, elevation of liver enzymes and thrombocytopenia; Can present atypical, without hypertension or proteinuria, 10-20% of the cases. Case report: 38 year old female patient, with a pregnancy of 38.5 weeks of gestation, treated at the Hospital Universitario San José de Popayán (Colombia. Atypical HELLP syndrome is diagnosed in a pregnant woman with thrombocytopenia, impaired liver enzymes, but no evidence of proteinuria or hypertension. Gestation is terminated by cesarean section and magnesium sulfate is given for 24 hours, with adequate post-surgical evolution, clinical improvement of the symptomatology presented, normalization of liver enzymes and platelet elevation. Conclusion: Knowledge of this syndrome, although of rare occurrence, allows a fast action, an effective diagnosis and treatment, to avoid morbidity and greater maternal fetal mortality.

Sjogren’s syndrome: a case report

Science.gov (United States)

Sunata, A.; Marpaung, B.

2018-03-01

The incidence of Sjogren’s Syndrome was estimated 4 in 100.000 of these cases with the prevalence is 0.2% to 2.7% of the population. Predominant sex female/male ratio is approximately 10:1 with peak incidence is in the fourth and fifth decade. A 29-year-old woman had dry eyes and recurrent sensation of sand in the eyes for two years. Schimmer’s test was positive ≤5mm in 5 minutes both, and the autoantibodies SSA and SSB were positive. Without history head or neck radiation and the result of laboratory examination hepatitis C and HIV negative. Until now there is no satisfying therapy for Sjogren Syndrome, only supportive specific to symptomatic can be treated. We reported a case of Sjogren Syndrome with dry eyes symptom, polyathralgia, and fatigue. Muscarinic agonist pilocarpine 5mg PO qid and hydroxychloroquine were given.

Usher's syndrome--case report.

Science.gov (United States)

Kwiecień, Sława; Sulak, Robert; Szaflik, Jerzy

2008-01-01

The aim of this study is to present a case of coincidence of sensorineural hearing loss with chronic recurrent bilateral cystoid macular oedema in a 32-year-old woman, who was admitted to the clinic for deterioration of visual acuity of four months' duration. The patient gave a history of hearing loss for 29 years. Visual field examination disclosed peripheral ring scotoma. Electrophysiological examination was performed: pattern visual evoked response was within normal limits and electroretinogram displayed diminished both photopic and scotopic response. As ophthalmoscopy demonstrated no pigment in the fundus of the eye, the findings were consisted with diagnosis of retinitis pigmentosis sine pigmento. The presence of loss of hearing indicated the necessity of performing the genetic examination for Usher's syndrome. In order to establish a final diagnosis of Usher's syndrome genetic examination must be performed, but family history is relevant. Early investigation for Usher's syndrome in children with sensorineural hearing impairment is of a great significance. The patient may develop symptoms of retinitis pigmentosa in second or even third decade of his life. The necessity of thorough investigation for detecting other systemic abnormalities should be emphasized. There is no effective treatment of this syndrome. A child with Usher's syndrome requires a comprehensive care of different medical specialties. Psychological, educational and sociological attitude is also of a great importance in the child development.

Reversible Cerebral Vasoconstriction Syndrome in Pediatrics: A Case Series and Review.

Science.gov (United States)

Coffino, Samantha W; Fryer, Robert H

2017-06-01

Reversible cerebral vasoconstriction syndrome is a transient vasculopathy associated with severe headaches and stroke. In most cases of reversible cerebral vasoconstriction syndrome, there is a precipitating event or trigger, such as pregnancy, serotonin agonist treatment or illicit drug use. The authors present 2 pediatric cases of reversible cerebral vasoconstriction syndrome and review the previous 11 pediatric cases in the literature. In many instances, the clinical and radiographic features are similar in both pediatric and adult cases. In the pediatric group, reported potential triggers include trauma (1/13), exercise (2/13), water to the face (3/13), hypertension (3/13), and medication or substance use (4/13). One surprising difference is that 11 out of 13 pediatric patients with reversible cerebral vasoconstriction syndrome are male while most cases in adults are female. Many of the pediatric patients with reversible cerebral vasoconstriction syndrome were treated with a calcium channel blocker and the overall outcome of pediatric reversible cerebral vasoconstriction syndrome was good, with most patients experiencing a full recovery.

Computational models to determine fluiddynamical transients due to condensation induced water hammer (CIWH)

International Nuclear Information System (INIS)

Swidersky, Harald; Schaffrath, Andreas; Dudlik, Andreas

2012-01-01

Condensation induced water hammer ('condensation hammer', CIWH) represent a dangerous phenomenon in pipings, which can endanger the pipe integrity. If they cannot be excluded, they have to be taken into account for the integrity proof of components and pipe structures. Up to now, there exists no substantiated model, which sufficiently determines loads due to CIWH. Within the framework of the research alliance CIWA, a tool for estimating the potential and the amount of pressure loads will be developed based on theoretical work and supported by experimental results. This first study discusses used computational models, results of experimental observations and gives an outlook onto future techniques. (orig.)

Clinical characteristics of mirror syndrome: a comparison of 10 cases of mirror syndrome with non-mirror syndrome fetal hydrops cases.

Science.gov (United States)

Hirata, Go; Aoki, Shigeru; Sakamaki, Kentaro; Takahashi, Tsuneo; Hirahara, Fumiki; Ishikawa, Hiroshi

2016-01-01

To investigate clinical features of mirror syndrome. We retrospectively reviewed 71 cases of fetal hydrops with or without mirror syndrome, and compared with respect to maternal age, the body mass index, the primipara rate, the gestational age at delivery, the timing of fetal hydrops onset, the severity of fetal edema, placental swelling, the laboratory data and the fetal mortality. The data are expressed as the medians. Mirror syndrome developed in 29% (10/35) of the cases with fetal hydrops. In mirror group, the onset time of fetal hydrops was significantly earlier (29 weeks versus 31 weeks, p = 0.011), and the severity of fetal hydrops (fetal edema/biparietal diameter) was significantly higher than non-mirror group (0.23 versus 0.16, p < 0.001). There was significantly higher serum human chorionic gonadotropin (hCG) (453,000 IU/L versus 80,000 IU/L, p < 0.001) and lower hemoglobin (8.9 g/dL versus 10.1 g/dL, p =0.002), hypoalbuminemia (2.3 mg/dL versus 2.7 mg/dL, p = 0.007), hyperuricemia (6.4 mg/dL versus 5.0 mg/dL, p = 0.043) in mirror group. Mirror syndrome is occurred frequently in early and severe fetal hydrops and cause hemodilution and elevation of serum hCG.

Water-hammer in the cold leg during an SBLOCA due to cold ECCS injection

International Nuclear Information System (INIS)

Ortiz, M.G.; Ghan, L.S.

1991-01-01

Water-hammer might occur in the cold leg of pressurized water reactors (PWR) during small break loss-of-coolant accidents (SBLOCA's), when cold emergency core cooling system (ECCS) water is injected into a pipe that may be partially filled with saturated steam. The water may mix with the steam and cause it to condense abruptly. Depending on the flow regime present, slugs of liquid may then be accelerated towards each other or against the piping structure. The possibility of this phenomenon is of concern to us because it may become a dominant phenomenon and change the character of the transient. In performing the code scaling, applicability, and uncertainty study (CSAU) on a SBLOCA scenario, we had to examine the possibility that the transient being analyzed could experience water-hammer and thus depart from the scope of the study. Two criteria for water-hammer initiation were investigated and tested using a RELAP5/MOD3 simulation of the transient. Our results indicated a very low likelihood of occurrence of the phenomenon. 8 refs., 6 figs

A Case of Wolfram Syndrome

Directory of Open Access Journals (Sweden)

Gholamali Naderian

2010-01-01

Full Text Available Purpose: To report a case of Wolfram syndrome characterized by early onset diabetes mellitus and progressive optic atrophy. Case Report: A 20-year-old male patient with diabetes mellitus type I presented with best corrected visual acuity of 1/10 in both eyes with correction of -0.25+1.50@55 and -0.25+1.50@131 in his right and left eyes, respectively. Bilateral optic atrophy was evident on fundus examination. The patient also had diabetes insipidus, neurosensory deafness, neurogenic bladder, polyuria and extra-residual voiding indicating atony of the urinary tract, combined with delayed sexual maturity. Conclusion: One should consider Wolfram syndrome in patients with juvenile onset diabetes mellitus and hearing loss. Ophthalmological examination may disclose optic atrophy; urologic examinations are vital in such patients.

Klippel-Trenaunay-Weber Syndrome:A case report

Energy Technology Data Exchange (ETDEWEB)

Ryu, Kyung Nam; Lee, Sun Wha; Yoon, Yup; Lim, Jae Hoon [Kyung Hee University Hopital, Seoul (Korea, Republic of)

1990-10-15

The Klippel-Trenauna-Weber Syndrome is characterized by a classical triad that includes unilateral cutaneous capillary hemangiomas, varicose veins, and local gigantism with both soft tissue and osseous overgrowth. Authors have experience on case of Klippel-Trenaunay-Weber Syndrome with hemangiomas of ipsilateral scrotum and foot.

Waardenburg syndrome: A report of three cases

Directory of Open Access Journals (Sweden)

Ghosh Sudip

2010-01-01

Full Text Available Waardenburg syndrome (WS is a rare autosomally inherited and genetically heterogeneous disorder of neural crest cell development with distinct cutaneous manifestations. Based on the clinical presentations, four subtypes of the disease are recognized. A careful clinical evaluation is required to differentiate various types of WS and other associated auditory-pigmentary syndromes. We describe a case series of WS to highlight the wide spectrum of manifestations of the syndrome including a rare association.

Case report: waardenburg syndrome.

Science.gov (United States)

Dumayas, Grace Lea; Capó-Aponte, José E

2015-03-01

A case of Waardenburg syndrome type 1 is described and relevant literature is reviewed to raise awareness about this rare syndrome, including the classification of each subtype and the differentiating clinical manifestations. A 44-year-old African-American female presented for a routine evaluation with hearing loss, dystopia canthorum (W index = 2.74), and almost complete gray hair. In addition, she presented with heterochromia irides, different fundus pigmentation between eyes. The patient did not have any upper limbs defect, cranial skeletal abnormalities, or intestinal disorders. Facial abnormalities and a white forelock are prominent features difficult to overlook during a routine ophthalmological examination. A careful medical history in patients with suspected Waardenburg syndrome is important to accurately classify this rare condition and to identify potential systemic implications associated to each subtype. The associated systemic complications can be addressed and managed through referral to the appropriate subspecialties. Reprint & Copyright © 2015 Association of Military Surgeons of the U.S.

Wolfram Syndrome. Case report.

Science.gov (United States)

Tarała, Wojciech; Drachal, Elzbieta; Mazur, Artur; Korczowski, Bartosz; Szadkowska, Agnieszka; Zmysłowska, Agnieszka; Młynarski, Wojciech

2016-01-01

Wolfram syndrome is a rare neurodegenerative and genetic disorder, characterized by insulin-dependent diabetes mellitus, caused by non-autoimmune loss of β cells, as well as optic atrophy; the disease is also known as DIDMOAD (diabetes insipidus, diabetes mellitus, optic atrophy, and deafness). Patients that demonstrate diabetes mellitus are also affected by: optic atrophy in the first decade of their life, diabetes insipidus and sensorineural deafness in the second decade, and urinary tract and neurological abnormalities in the third decade of their life. Patients with Wolfram syndrome usually die due to central respiratory failures caused by brain stem atrophy in their third or at the beginning of their fourth decade of life. The authors present a case of two female siblings with diagnosed Wolfram syndrome that have been diagnosed with diabetes mellitus, optic atrophy, and urological abnormalities. Early diagnosis and adequate hormonal supplementation can improve their quality of life. © Polish Society for Pediatric Endocrinology and Diabetology.

Pregnancy and Evans´ syndrome: case report

Directory of Open Access Journals (Sweden)

Santiago Artucio

2015-12-01

Full Text Available Evans´ syndrome is the coexistence of autoimmune thrombocytopenia with autoimmune hemolytic anemia. It is rarely found during the course of a pregnancy. This makes treatment options more difficult, since some therapeutic drugs are teratogenic. The effects of Evans´ syndrome in the fetus and newborn are unknown given the low number of reported cases. We report the case of a patient with preconceptional diagnosis of Evans´ syndrome, who develops a hemolytic crisis during the course of a pregnancy, and diagnosis of intrauterine growth restriction (IUGR, treated at Clínica Ginecotocológica “A” at the Pereira Rossell Hospital Center, in Montevideo, Uruguay. Treatment options and evolution are analyzed, as well as previous reports.

CROUZON SYNDROME: A CASE REPORT

Directory of Open Access Journals (Sweden)

Debdas

2015-07-01

Full Text Available Crouzon’s Syndrome is a rare autosomal dominant disorder. Normally, the sutures in the human skull fuse after the complete growth of the brain. But, if any of these sutures closes early then it may interfere with the growth of the brain. Premature sutural fusion most commonly involves sagittal suture followed by coronal suture. We report a case of 6 - year - old male child presented with characteristic features of Crouzon’s syndrome. Diagnosis was made on the basis of clinical and radiological findings.

Caudal regression syndrome : a case report

International Nuclear Information System (INIS)

Lee, Eun Joo; Kim, Hi Hye; Kim, Hyung Sik; Park, So Young; Han, Hye Young; Lee, Kwang Hun

1998-01-01

Caudal regression syndrome is a rare congenital anomaly, which results from a developmental failure of the caudal mesoderm during the fetal period. We present a case of caudal regression syndrome composed of a spectrum of anomalies including sirenomelia, dysplasia of the lower lumbar vertebrae, sacrum, coccyx and pelvic bones,genitourinary and anorectal anomalies, and dysplasia of the lung, as seen during infantography and MR imaging

Caudal regression syndrome : a case report

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun Joo; Kim, Hi Hye; Kim, Hyung Sik; Park, So Young; Han, Hye Young; Lee, Kwang Hun [Chungang Gil Hospital, Incheon (Korea, Republic of)

1998-07-01

Caudal regression syndrome is a rare congenital anomaly, which results from a developmental failure of the caudal mesoderm during the fetal period. We present a case of caudal regression syndrome composed of a spectrum of anomalies including sirenomelia, dysplasia of the lower lumbar vertebrae, sacrum, coccyx and pelvic bones,genitourinary and anorectal anomalies, and dysplasia of the lung, as seen during infantography and MR imaging.

Nevoid basal cell carcinoma syndrome (Gorlin-Goltz syndrome). Case report.

Science.gov (United States)

Fini, G; Belli, E; Mici, E; Virciglio, P; Moricca, L M; D'Itri, L; Leonardi, A; Malavenda, M S; Krizzuk, D; Merola, R; Maturo, A; Pasta, V

2013-01-01

Gorlin-Goltz syndrome or nevoid basal cell carcinoma syndrome (NBCCS) comprises multiple basal cell carcinomas, keratocysts of the jaw, palmar/plantar pits, spine and rib anomalies, calcifications of the falx cerebri etc. The diagnosis is made according to clinical criteria (Kimonis Criteria) and genetic ones. We studied one family where father and then his sun resulted affected by each syndrome. Gorlin-Goltz syndrome is a rare disease diagnosed according to clinical criteria sometimes difficult to integrate. The family case we presented shows how you can get diagnosis even in older age and after numerous surgeries. Patients should be given special attention and therefore should be monitorized and need multidisciplinary treatments continued in time, even a trivial change of signs and symptoms may be an important indicator of a precipitating event which puts the patient's life under threat.

Rapunzel syndrome: a rare postpartum case.

Science.gov (United States)

Tegene, Teshome; Foda, Yahia; Hussain, Omar; Oloniyo, Kolawole; Ha, Ngoc-Tram; Manikonda, Geeta

2013-01-01

The Rapunzel syndrome describes a disorder in which a significant amount of hair is swallowed, forming a trichobezoar that extends past the stomach into the small intestines. Given the indigestible nature of hair, it subsequently leads to obstruction within the gastrointestinal system. Clinically, patients may present with symptoms of gastrointestinal obstruction, including abdominal complaints such as pain, nausea, vomiting, and diarrhea. However, due to its broad and nonspecific presenting symptoms, the diagnosis of Rapunzel syndrome warrants consideration once other common etiologies have been excluded. Surgical intervention is often required to remove the abdominal mass. This unusual syndrome is often associated with psychiatric disorders, affecting young women most commonly. In this report, we will discuss a unique case of Rapunzel syndrome in a one-month postpartum woman.

Mitigating check valve slamming and subsequentwater hammer events for PPFS using MOC

International Nuclear Information System (INIS)

Tian Wenxi; Su Guanghui; Wang Gaopeng; Qiu Suizheng; Xiao Zejun

2009-01-01

The method of characteristic (MOC) was adopted to analyze the check valve-induced water hammer behaviors for a Parallel Pumps Feedwater System (PPFS) during the alternate startup process. The motion of check valve disc was simulated using inertial valve model. Transient parameters including the pressure oscillation, local flow velocity and slamming of the check valve disc etc. have been obtained. The results showed that severe slamming between the valve disc and valve seat occurred during the alternate startup of parallel pumps. The induced maximum pressure vibration amplitude is up to 5.0 MPa. The scheme of appending a damping torque to slow down the check valve closing speed was also performed to mitigate of water hammer. It has been numerically approved to be an effective approach. (authors)

Mitigating check valve slamming and subsequentwater hammer events for PPFS using MOC

Institute of Scientific and Technical Information of China (English)

TIAN Wenxi; SU Guanghui; WANG Gaopeng; QIU Suizheng; XIAO Zejun

2009-01-01

The method of characteristic (MOC) was adopted to analyze the check valve-induced water hammer behaviors for a Parallel Pumps Feedwater System (PPFS) during the alternate startup process. The motion of check valve disc was simulated using inertial valve model. Transient parameters including the pressure oscillation, local flow velocity and slamming of the check valve disc etc. have been obtained. The results showed that severe slamming between the valve disc and valve seat occurred during the alternate startup of parallel pumps. The induced maximum pressure vibration amplitude is up to 5.0 MPa. The scheme of appending a damping torque to slow down the check valve closing speed was also performed to mitigate of water hammer. It has been numerically approved to be an effective approach.

Method for estimating steam hammer effects on swing-check valves during closure

International Nuclear Information System (INIS)

Uram, E.M.

1976-01-01

Relationships are developed for estimating the disk impact velocity resulting from a free swing closure of swing-check valves in normal flow and for pipe rupture. They derive from a phase-plane solution of the differential equation for the disk motion that accounts for the nature of the valve pressure drop variation due to steam-hammer effects during closure. For closure in normal flow, the method presented has a more correct foundation than that given in reference where a constant, average valve pressure differential based upon the steady-state pressure drop for the total piping system (which has no real relationship to the steam-hammer-induced valve pressure changes during the closure transient) is used in the valve disk motion equation

Comèl-Netherton syndrome – case report

Directory of Open Access Journals (Sweden)

Izabela Błażewicz

2014-11-01

Full Text Available Introduction. Comèl-Netherton syndrome is a rare autosomal recessive genodermatosis characterized by congenital ichthyosiform erythroderma, ichthyosis linearis circumflexa, trichorrhexis invaginata, and atopic diathesis. Comèl-Netherton syndrome is caused by mutations of the SPINK5 gene, which encodes the serine protease inhibitor LEKTI. Objective. We present diagnostic and therapeutic difficulties in a patient with Comèl-Netherton syndrome. Case report. We present the case of a 3-year-old boy, in whom from the first day of life generalized ichthyosiform erythroderma and diffuse exfoliation of the skin were observed. The differential diagnosis included Omenn syndrome, and atopic and seborrheic dermatitis. Finally, based on the overall clinical picture and microscopic examination of the hair, which showed the presence of bamboo hair, Comèl-Netherton syndrome was diagnosed. Conclusions . Because of similarity to other erythroderma, diagnosis of Comèl-Netherton syndrome in the first months of life creates diagnostic problems. In older children, recurrent skin infections and atopic diathesis can cause therapeutic difficulties and require the cooperation of many specialists.

Stratified flow instability and slug formation leading to condensation-induced water hammer in a horizontal refrigerant pipe

International Nuclear Information System (INIS)

Samuel Martin, C.

2005-01-01

Full text of publication follows: An experimental apparatus was designed for the purpose of investigating the phenomenon of condensation-induced water hammer in an ammonia refrigeration system. Water hammer was initiated by introducing warm ammonia gas over static subcooled ammonia liquid placed in a horizontal 146.3 mm diameter carbon steel pipe 6.0 m in length. By means of fast response piezoelectric pressure transducers and a high speed data acquisition system rapid dynamic pressures were recorded whenever a shock event occurred. Moreover, by means of top-mounted diaphragm pressure transducers the speed of liquid slugs propagating along the pipe was determined. The occurrence of condensation induced water hammer depended upon three major variables; namely, (1) initial liquid depth, (2) liquid temperature, and (3) mass flow rate of warm gas. For given liquid depth and temperature, once the warm gas threshold conditions were exceeded shocks occurred with greater magnitude as the mass flow rate of gas input was increased. With adequate subcooling condensation-induced water hammer occurred for initial liquid depths ranging from 25% to 95% of internal pipe diameter. The threshold mass flow rate of warm gas necessary to initiate water hammer was greater as the initial liquid depth was lowered. Based upon experimental results obtained from four pressure transducers located on the top of the test pipe conditions corresponding to bridging were ascertained. For various initial liquid depths the onset of instability from stratified flow to bridging was correlated with the Taitel-Dukler instability criterion. (author)

Noonan Syndrome and Stroke: A Case Report

Directory of Open Access Journals (Sweden)

Ebru Nur Mıhçı

2012-03-01

Full Text Available Noonan syndrome is an autosomal dominant genetic disease characterized by short stature, webbed neck, typical facial appearance and congenital heart disease. Here we report a 24 year old woman patient with the diagnosis of Noonan syndrome who admitted to our clinic with ischemic stroke caused by atrial fibrillation secondary to hypertrophic cardiomyopathy. Noonan syndrome patients with stroke due to vascular malformations have been reported, but non-obstructive hypertrophic cardiomyopathy is a rare cause for stroke in patients with Noonan syndrome. Our aim of presenting the case emphasize that Noonan syndrome should be thought as a differential diagnosis in patients with stroke at a young age and dysmorphic facial appearance

Noonan Syndrome and Stroke: A Case Report

Directory of Open Access Journals (Sweden)

Ebru Nur Mıhçı

2012-03-01

Full Text Available Noonan syndrome is an autosomal dominant genetic disease characterized by short stature, webbed neck, typical facial appearance and congenital heart disease. Here we report a 24 year old woman patient with the diagnosis of Noonan syndrome who admitted to our clinic with ischemic stroke caused by atrial fibrillation secondary to hypertrophic cardiomyopathy. Noonan syndrome patients with stroke due to vascular malformations have been reported, but non-obstructive hypertrophic cardiomyopathy is a rare cause for stroke in patients with Noonan syndrome. Our aim of presenting the case emphasize that Noonan syndrome should be thought as a differential diagnosis in patients with stroke at a young age and dysmorphic facial appearance.

A Classic Case of Basal Cell Nevus Syndrome

Directory of Open Access Journals (Sweden)

Dattaprasad Dadhe

2015-01-01

Full Text Available The basal cell nevus syndrome is an autosomal dominant inherited condition characterized mainly by basal cell carcinomas, multiple keratinizing odontogenic tumors, and other systemic anomalies. As these manifestations do not alter the patient′s lifestyle, most of the cases are diagnosed through oral abnormalities. A classic case of basal cell nevus syndrome fulfilling almost all the major and minor criteria has been reported here.

Williams-Beuren's Syndrome: A Case Report.

Science.gov (United States)

Zamani, Hassan; Babazadeh, Kazem; Fattahi, Saeid; Mokhtari-Esbuie, Farzad

2012-01-01

Williams-Beuren syndrome is a rare familial multisystem disorder occurring in 1 per 20,000 live births. It is characterized by congenital heart defects (CHD), skeletal and renal anomalies, cognitive disorder, social personality disorder and dysmorphic facies. We present a case of Williams syndrome that presented to us with heart murmur and cognitive problem. A 5-year-old girl referred to pediatric cardiologist because of heart murmurs. She had a systolic murmur (2-3/6) in right upper sternal border with radiation to right cervical region. She also had a bulge forehead. Angiography showed mild supra valvular aortic stenosis and mild multiple peripheral pulmonary stenosis. Fluorescent in situ hybridization (FISH) was performed and the result was: 46.XX, ish del (7q11.2) (ELN X1) (7q22 X2) ELN deletion compatible with Williams syndrome. Peripheral pulmonary artery stenosis is associated with Noonan syndrome, Alagille syndrome, Cutis laxa, Ehler-Danlos syndrome, and Silver-Russel syndrome. The patient had peripheral pulmonary artery stenosis, but no other signs of these syndromes were present, and also she had a supravalvular aortic stenosis which was not seen in other syndromes except Williams syndrome. Conclusion. According to primary symptoms, paraclinical and clinical finding such as dysmorphic facies, cognitive disorder and congenital heart defect, Williams syndrome was the first diagnosis. We suggest a more attention for evaluating heart murmur in childhood period, especially when the patient has abnormal facial features or mental problem.

Williams-Beuren's Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Hassan Zamani

2012-01-01

Full Text Available Williams-Beuren syndrome is a rare familial multisystem disorder occurring in 1 per 20,000 live births. It is characterized by congenital heart defects (CHD, skeletal and renal anomalies, cognitive disorder, social personality disorder and dysmorphic facies. We present a case of Williams syndrome that presented to us with heart murmur and cognitive problem. A 5-year-old girl referred to pediatric cardiologist because of heart murmurs. She had a systolic murmur (2-3/6 in right upper sternal border with radiation to right cervical region. She also had a bulge forehead. Angiography showed mild supra valvular aortic stenosis and mild multiple peripheral pulmonary stenosis. Fluorescent in situ hybridization (FISH was performed and the result was: 46.XX, ish del (7q11.2 (ELN X1 (7q22 X2 ELN deletion compatible with Williams syndrome. Peripheral pulmonary artery stenosis is associated with Noonan syndrome, Alagille syndrome, Cutis laxa, Ehler-Danlos syndrome, and Silver-Russel syndrome. The patient had peripheral pulmonary artery stenosis, but no other signs of these syndromes were present, and also she had a supravalvular aortic stenosis which was not seen in other syndromes except Williams syndrome. Conclusion. According to primary symptoms, paraclinical and clinical finding such as dysmorphic facies, cognitive disorder and congenital heart defect, Williams syndrome was the first diagnosis. We suggest a more attention for evaluating heart murmur in childhood period, especially when the patient has abnormal facial features or mental problem.

Neonatal Marfan syndrome: Report of two cases.

Science.gov (United States)

Jurko, Tomas; Jurko, Alexander; Minarik, Milan; Micieta, Vladimir; Tonhajzerova, Ingrid; Kolarovszka, Hana; Zibolen, Mirko

2017-07-01

Marfan syndrome is rarely diagnosed in the neonatal period because of variable expression and age-dependent appearance of clinical signs. The prognosis is usually poor due to high probability of congestive heart failure, mitral and tricuspid regurgitations with suboptimal response to medical therapy and difficulties in surgical management. The authors have studied two cases of Marfan syndrome in the newborn period. Two cases of neonatal Marfan syndrome, one male and one female, were diagnosed by characteristic physical appearance. Both infants had significant cardiovascular abnormalities diagnosed by ultrasonography. Genetic DNA analysis in the second case confirmed the mutations in the fibrillin-1 gene located on chromosome 15q21 which is responsible for the development of Marfan syndrome. The boy died at six weeks of age with signs of rapidly progressive left ventricular failure associated with pneumonia. The second infant was having only mild signs of congestive heart failure and has been treated with beta blockers. At the age of 4 years her symptoms of congestive heart failure had worsened due to progression of mitral and tricuspid insufficiency and development of significant cardiomegaly. Mitral and tricuspid valvuloplasy had to be done at that time. Early diagnosis of Marfan syndrome in the newborn period can allow treatment in the early stages of cardiovascular abnormalities and may improve the prognosis. It also helps to explain to the family the serious health problem of their child.

Breast Cancer in Cowden Syndrome: A Case Report

International Nuclear Information System (INIS)

Jung, Mi Hee

2009-01-01

Cowden syndrome is rare condition with characteristic multiple hamartoma and mucocutaneous lesions. It is important for radiologists to be aware of Cowden syndrome because the patients with this disease have an increased risk for the occurrence of breast cancer. We report here on a case of invasive breast cancer in a 36-year-old female patient with Cowden syndrome

A Case Report of Gorlin-goltz Syndrome

Directory of Open Access Journals (Sweden)

Shima Nafarzadeh

2016-04-01

Full Text Available Nevoid basal cell carcinoma syndrome (Gorlin syndrome is an autosomal dominant inherited condition that exhibits high penetrance and variable expressivity. The syndrome is caused by mutations in patched (PTCH, a tumor suppressor gene that has been mapped to chromosome 9q22.3-q31. Gorlin-goltz syndrome (GGS is characterised by the presence of multiple odontogenic keratocysts in the jaws, basal cell carcinomas, palmar and plantar pits and intracranial calcifications. Here, we present a case of familial GGS, characterised by multiple odontogenic keratocysts, broad nasal ridge, hypertelorism, enlarged head circumference and dermoid cysts.

Seckel syndrome: A report of a case

Directory of Open Access Journals (Sweden)

K Ramalingam

2012-01-01

Full Text Available Seckel syndrome, first defined by Seckel in 1960, is a rare (incidence 1:10,000, genetically heterogeneous autosomal recessive disorder presenting at birth. This syndrome is characterized by a proportionate dwarfism of prenatal onset, a severe microcephaly with a "bird-headed" like appearance (beaked nose, receding forehead, prominent eyes, and micrognathia, and mental retardation. The significance of dental alterations in this syndrome resides in the defect, hypoplastic enamel, being limited to the primary dentition; in most instances the second primary molar tooth is not affected. A case of the Seckel syndrome is presented.

Non-Syndromic Oligodontia in permanent dentition: A case report ...

African Journals Online (AJOL)

of a syndrome. The present case report highlights a unique case of non syndromic oligodontia, with agenesis of four permanent incisors, left permanent canine and right second premolar in the mandibular arch and its management with a novel fixed functional prosthetic appliance. Prosthetic rehabilitation is an urgent need ...

Kabuki Syndrome: a case report with severe ocular abnormalities

Directory of Open Access Journals (Sweden)

Flavio Mac Cord Medina

2013-10-01

Full Text Available Kabuki syndrome is a rare congenital anomaly, characterized by five fundamental features, the "Pentad of Niikawa": dysmorphic facies, skeletal anomalies, dermatoglyphic abnormalities, mild to moderate mental retardation and postnatal growth deficiency. Patients present characteristic external ocular features, nonetheless they may also present significant ocular abnormalities. We report a case of a brazilian child diagnosed with Kabuki syndrome, addressing the clinical features observed, with emphasis on the ocular manifestations. This case highlights the existence of this syndrome and all of its complexity. The identification of preventable causes of loss of vision underlines the value of detailed ophthalmologic examination of Kabuki syndrome patients.

Brain-hepato-renal syndrome (Zellweger syndrome). Report of two cases and a review of the syndrome

International Nuclear Information System (INIS)

Ruiz, T.; Caparros, C.; Blanco, A.; Lopez, A.M.

1997-01-01

Cerebro-hepato-renal syndrome is a rare disorder that is transmitted by autosomal recessive inheritance. Children with this syndrome present mongoloid facies and severe muscle hypotonic at birth. Scimitar-like knee calcifications are considered a pathognomonic feature of this disorder. We present two patients with Zellweger syndrome, according to the diagnosis suggested by our Radiodiagnostic Service. Our objective is to stress the importance of the radiological findings, which in many cases are decisive in establishing the definitive diagnosis. (Author) 10 refs

[Toxic-shock syndrome. Three cases (author's transl)].

Science.gov (United States)

Rapin, M; D'Enfert, J; Cabane, J

1981-06-13

Several cases of toxic shock syndrome (T.S.S) have been recently reported from the U.S.A. Clinical features of this new syndrome include fever, desquamative scarlatiniform rash, hypotension and involvement of central nervous system, liver, kidney and muscles. More than 90% of cases are women with staphylococcic vaginitis using tampons during menstruations. A toxin produced by staphylococcus aureus is thought to be the causative agent, because the germ has been isolated in local (vaginal, pharyngeal, subcutaneous or other sites) but not systemic (blood, cerebrospinal fluid) cultures. The mortality rate is 3-10%, and relapse can occur. We report the first three french cases of T.S.S.: a 17 year old girl with typical tampon-associated vaginitis, a 36 year old woman with a postoperative peritonitis and a 20 year old man with a popliteal abscess. Staphylococcus aureus of type I or IV was identified at the site of infection in all cases, but never in blood cultures. These three patients recovered with antistaphylococcic antibiotics and supportive therapy, but local treatment of infections seems to have been of utmost importance. These cases suggest that T.S.S. can occur with several staphylococcus serotypes and confirm that this syndrome is not always associated with tampons and vaginitis.

Two Cases of. Cushing's Syndrome tumour and bilateral hyperplasia

African Journals Online (AJOL)

Two patients, one with Cushing's syndrome and one with Cushing's disease, are presented. In the first case the syndrome was caused by a tumour of the right suprarenal gland which was treated by unilateral adrenalectomy, and the second case was diagnosed as hyperplasia of the left suprarenal gland, eventually leading ...

A Case of Pasqualini Syndrome

Directory of Open Access Journals (Sweden)

P.M. Liashuk

2016-05-01

Full Text Available The article presents a case of isolated congenital deficiency of luteinizing hormone (Pasqualini syndrome that manifested by secondary hypogonadism with abnormalities of copulative and fertile functions, which were normalized after the treatment using chorionic gonadotropin.

Influence of pin and hammer mill on grinding characteristics, thermal and antioxidant properties of coriander powder.

Science.gov (United States)

Barnwal, P; Singh, K K; Sharma, Alka; Choudhary, A K; Saxena, S N

2015-12-01

In present study, influence of grinding (hammer and pin mills) and moisture content (range: 6.4-13.6 % dry basis) on the quality traits of coriander powder were investigated. These include grinding parameters, colour parameters, specific heat, thermal conductivity, thermal diffusivity, glass transition temperature, essential oil, total phenolic content, total flavonoid content and DPPH scavenging (%) of coriander powder. For coriander seed, the geometric properties such as major, medium, minor dimensions, geometric mean diameter, arithmetic mean diameter, sphericity, surface area and volume of coriander seeds increased significantly with increasing moisture (6.4-13.6 % db). For coriander powder, the grinding parameters such as average particle size, volume surface mean diameter and volume mean diameter increased significantly with increasing moisture (6.4-13.6 % db). With the grinding method, the colour attributes of coriander powder such as L-value, a-value, b-value, hue angle and browning index varied significantly. It was observed that the specific heat followed second order polynomial relationship with temperature and moisture whereas thermal conductivity varied linearly with temperature and moisture content. The variation of glass transition temperature with moisture can be best represented in quadratic manner. Total flavonoid content (mg QE/g crude seed extract) and DPPH scavenging % activity of coriander powder is significantly affected by grinding methods. A lower value of specific heat was observed for hammer ground coriander powder as compared to pin mill ground coriander powder. The thermal conductivity of hammer mill ground coriander powder was higher as compared to pin mill ground coriander. It was observed that hammer mill yields more fine coriander powder in comparison to pin mill. The browning index was more in hammer mill ground coriander powder.

PLATEAU IRIS SYNDROME--CASE SERIES.

Science.gov (United States)

Feraru, Crenguta Ioana; Pantalon, Anca Delia; Chiselita, Dorin; Branisteanu, Daniel

2015-01-01

Plateau iris is characterized by closing the anterior chamber angle due to a large ciliary body or due to its anterior insertion that alters the position of iris periphery in respect to the trabecular meshwork. There are two aspects that need to be differentiated: plateau iris configuration and plateau iris syndrome. The first describes a situation when the iris root is flat and the anterior chamber is not shallow, the latter refers to a post laser iridotomy condition in which a patent iridotomy has removed the relative pupillary block, but goniscopically confirmed angle closure recurs without central shallowing of the anterior chamber. Isolated plateau iris syndrome is rare compared to plateau iris configuration. We hereby present two case reports of plateau iris syndrome in young patients who came to an ophthalmologic consult by chance.

Guillain-Barre syndrome associated with hemorrhagic fever with renal syndrome in China: a case report.

Science.gov (United States)

Jiao, Jie; Wu, Lei; Yin, Jianyuan; Quan, Xiaojiao; Chen, Wei; Hu, Jie

2018-03-27

We describe a case of Guillain-Barre syndrome (GBS) associated with hemorrhagic fever with renal syndrome. To our knowledge, only five cases of GBS associated with Hantavirus infection have been reported so far. A 62-year-old man presented intermittent fever, chill and oliguria. According to remarkable leukocytosis, atypical lymphocytes, thrombocytopenia and former dwelling in hemorrhagic fever-endemic area, he was suspected as hemorrhagic fever with renal syndromeand certified with positive Hantavirus IgG. Later, the patient had symmetrical flaccid paralysis of all extremities. Electromyography showed peripheral nerve injury (mainly in axon). The patient was diagnosed as having acute motor sensory axonal neuropathy (AMSAN). After immunoglobulin infusion, patient showed progressive recovery and was transferred 3 weeks after his first admission to a rehabilitation center. Our case was the 6th reported case of GBS associated with hemorrhagic fever with renal syndrome. Moreover, we for the first time classified the subtype of GBS (AMSAN) based on the electrophysiology characteristics. GBS should be suspected in patients who are already diagnosed as hemorrhagic fever with renal syndrome when delayed symmetrical limb paralysis occurs. Until recent now, GBS was only reported in hemorrhagic fever patients in Europe and Asia, which termed as hemorrhagic fever with renal syndrome.

Rapunzel Syndrome: A Rare Postpartum Case

Directory of Open Access Journals (Sweden)

Teshome Tegene

2013-01-01

Full Text Available The Rapunzel syndrome describes a disorder in which a significant amount of hair is swallowed, forming a trichobezoar that extends past the stomach into the small intestines. Given the indigestible nature of hair, it subsequently leads to obstruction within the gastrointestinal system. Clinically, patients may present with symptoms of gastrointestinal obstruction, including abdominal complaints such as pain, nausea, vomiting, and diarrhea. However, due to its broad and nonspecific presenting symptoms, the diagnosis of Rapunzel syndrome warrants consideration once other common etiologies have been excluded. Surgical intervention is often required to remove the abdominal mass. This unusual syndrome is often associated with psychiatric disorders, affecting young women most commonly. In this report, we will discuss a unique case of Rapunzel syndrome in a one-month postpartum woman.

A Case with Cramp-Fasciculation Syndrome

Directory of Open Access Journals (Sweden)

Pinar Yalinay Dikmen

2014-12-01

Full Text Available Cramp-fasciculation syndrome is one of the peripheral nerve hyperexcitability disorders and presents muscle aching, cramps, stiffness and exercise intolerance. Fasciculation and cramps can be seen both in healthy individuals and in those with fatal diseases, such as Amyotrophic Lateral Sclerosis. We present a 27-year-old male patient, professional soccer player with fasciculations and cramps in  bilateral gastrocnemius-soleus complex. The patient complained about having to stop playing soccer because of muscle cramps and twitches in both calves, which had started 3 years earlier. After completing all laboratory and electrophysiological examinations, the patient was diagnosed as cramp-fasciculation syndrome. The aim of this paper was to present a rare case of cramp-fasiculation syndrome and discuss if the syndrome is benign or pioneer of a severe pathological process.

A case Report of Wolfram Syndrome

Directory of Open Access Journals (Sweden)

Zahra Razavi

2007-01-01

Full Text Available Wolfram syndrome is the association of diabetes mellitus, optic atrophy, diabetes insipidus and sensorineural deafness and is sometimes called DIDMOAD (Diabetes Insipidus, Diabets Mellitus, Optic Atrophy, and Deafness. It is a rare autosomal recessive disease with prevalence of one per 770,000. Natural history of Wolfram syndrome suggests that most patients will eventually develop most complications of this progressive neurodegenerative disorder. Juvenile–onset diabetes mellitus and optic atrophy are the best available diagnostic criteria for Wolfram syndrome. In this report clinical features of a patient with DIDMOAD syndrome is presented. A 12 year old male presented with short standing diabetes mellitus and diabetes insipidus. Further investigations showed bilateral optic atrophy, mild hearing loss and short stature. His parents were relative and he is first case in his family.

Autoerythrocyte Sensitization Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Pinar Ozuguz

2014-04-01

Full Text Available Autoerythrocyte sensitization syndrome or Gardner-Diamond syndrome is a rare syndrome, characterized by recurrent, spontaneous, painful ecchymosis. The lesions occur particularly after emotional stress or mild trauma. Psychiatric problems are commonly observed in these patients. The lower limbs and the trunk are the most often localizations; however, lesions can appear on any other skin area. It is thought to be a sensitivity to intradermally injected autoerythrocyte. The diagnosis is usually based on typical anamnesis, clinical presentation, absence of specific laboratory changes and positive intradermal test. This syndrome should be considered in the differential diagnosis of purpura, especially in patients with psychiatric problems and without any coagulopathy. Herein, a case of 38 year-old-female who has recurrent ecchymoses on her legs, fatigue, headache and sleeping problems is presented.

Nevoid Basal Cell Carcinoma Syndrome : A Case Report

Directory of Open Access Journals (Sweden)

K Rajanikanth

2004-01-01

Full Text Available The nevoid basal cell carcinoma syndrome (NBCCS or Gorlin - Goltz syndrome is an autosomal disorder principally characterized by cutaneous basal cell carcinomas, multiple keratocysts, and skeletal anomalies. The major organ systems involved are skin, bones, central nervous system, eyes, gonads and endocrine. This particular syndrome is extensively described in the literature under different names. However, there are only few cases reported in the Indian literature. An unusual case of a 33-year old male with large odontogenic keratocyst involving impacted canine in the mandible, along with multiple cysts and impacted teeth in the maxilla; bifid rib and vertebral anomalies has been described.

Diagnosis of 20 cases with chronic radiation syndrome

International Nuclear Information System (INIS)

Zhang, Hongshou; Shen, Zhezhong; Wen Zhigen; Xie, Xiaoping; Ni, Jinxian

1984-01-01

Twenty cases with chronic radiation syndrome were diagnosed in our department during 1957-1980. All except one were radiologists, and eight of them had worked in radiological departments for over 20 years. Owing to the use of out-dated x-ray machines as well as radium sources without adequate protection, all these cases were apparently overexposed to radiation. They presented following signs and symptoms of chronic radiation syndrome: excitability, palpitation, fatigue, general weakness, loss of weight, oversweating accompanied by tendency of lowered metabolism, peripheral blood cell changes, and chromosome aberrations. The diagnosis of this syndrome was based on definitive professional and over-exposure history, clinical picture and abnormal laboratory findings. (author)

Utilization of the Nelkin model in a Hammer computer code for calculation the reactor parameters

International Nuclear Information System (INIS)

Leal, L.C.

1980-07-01

The possibility of modifying the HAMMER code, in the thermal part, by changing the thermal neutron scattering Kernel of its library for another one calculated in a subprogramm which can be incorporated to the code, is studied. This subprogramm uses the original version of the Nelkin model instead of its approximation which is used in the HAMMER. It has the advantage of giving the values of the Kernel for any temperature of the reactor for the approximations P 0 , P 1 , P 2 and P 3 . (Author) [pt

Helium hammer in superfluid transfer

Science.gov (United States)

Tward, E.; Mason, P. V.

1984-01-01

Large transient pressure pulses, referred to as a helium hammer, which occurred in the transfer line of the main cryogenic tank during the development tests of the Infrared Astronomical Satellite, launched on January 25, 1983, are analyzed, and the measures taken to prevent a failure described. The modifications include an installation of a 2.3-liter surge tank upstream, and a back-up relief valve downstream, of a burst disk. The surge tank is designed to attenuate a 0.33-MPa pressure pulse at the inlet down to 0.092 MPa at the outlet. A mechanism of the pulse generation is suggested, which involves flashing and rapid recondensation of the small amount of liquid entering the warm section of a transition to room temperature.

Structural dynamics and fracture mechanics calculations of the behaviour of a DN 425 test piping system subjected to transient loading by water hammer

International Nuclear Information System (INIS)

Kussmaul, K.; Kobes, E.; Diem, H.; Schrammel, D.; Brosi, S.

1994-01-01

Within the scope of the German HDR safety programme, several tests were carried out to investigate transient pipe loading initiated by a simulated double-ended guillotine break event, and subsequent closure of a feedwater check valve (water hammer, blow-down). Numerical analyses by means of finite element programmes were performed in parallel to the experiments. Using water hammer tests of a DN 425 piping system with predamaged components, the procedure of such analyses will be demonstrated. The results are presented, beginning with structural dynamic calculations of the undamaged piping; followed by coupling of structural dynamics and fracture mechanics computations with simple flaw elements (line spring); and finishing with costly three-dimensional fracture mechanics analyses. A good description of the real piping behaviour can be made by the numerical methods, even in the case of high plastification processes. ((orig.))

Systematic review of case reports of antiphospholipid syndrome following infection.

Science.gov (United States)

Abdel-Wahab, N; Lopez-Olivo, M A; Pinto-Patarroyo, G P; Suarez-Almazor, M E

2016-12-01

The objective of this study was to conduct a systematic review of case reports documenting the development of antiphospholipid syndrome or antiphospholipid syndrome-related features after an infection. We searched Medline, EMBASE, Web of Science, PubMed ePubs, and The Cochrane Library - CENTRAL through March 2015 without restrictions. Studies reporting cases of antiphospholipid syndrome or antiphospholipid syndrome-related features following an infection were included. Two hundred and fifty-nine publications met inclusion criteria, reporting on 293 cases. Three different groups of patients were identified; group 1 included patients who fulfilled the criteria for definitive antiphospholipid syndrome (24.6%), group 2 included patients who developed transient antiphospholipid antibodies with thromboembolic phenomena (43.7%), and group 3 included patients who developed transient antiphospholipid antibodies without thromboembolic events (31.7%). The most common preceding infection was viral (55.6%). In cases that developed thromboembolic events Human immunodeficiency and Hepatitis C viruses were the most frequently reported. Parvovirus B19 was the most common in cases that developed antibodies without thromboembolic events. Hematological manifestations and peripheral thrombosis were the most common clinical manifestations. Positive anticardiolipin antibodies were the most frequent antibodies reported, primarily coexisting IgG and IgM isotypes. Few patients in groups 1 and 2 had persistent antiphospholipid antibodies for more than 6 months. Outcome was variable with some cases reporting persistent antiphospholipid syndrome features and others achieving complete resolution of clinical events. Development of antiphospholipid antibodies with all traditional manifestations of antiphospholipid syndrome were observed after variety of infections, most frequently after chronic viral infections with Human immunodeficiency and Hepatitis C. The causal relationship between infection

Hermansky-Pudlak Syndrome: A Case Report

Science.gov (United States)

Berber, Ilhami; Erkurt, Mehmet Ali; Kuku, Irfan; Kaya, Emin; Koroglu, Mustafa; Gul, Mehmet; Bentli, Recep

2014-01-01

Objective. The aim of this paper is to report the case of a patient diagnosed with Hermansky-Pudlak syndrome, as a result of bleeding diathesis. Clinical Presentation and Intervention. A 23-year-old male presented with recurrent epistaxis and, upon physical examination, was found to be remarkable for albinism and suborbital ecchymosis. The absence of dense bodies in the platelets was demonstrated using electron microscopy. This patient was (slowly) administered one unit of a platelet suspension, and his bleeding decreased considerably. Conclusion. This case shows that Hermansky-Pudlak syndrome should be considered in the differential diagnosis of a patient presenting with bleeding diathesis, when the clinical presentation also includes oculocutaneous albinism and visual problems. PMID:24707413

Hermansky-Pudlak Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Ilhami Berber

2014-01-01

Full Text Available Objective. The aim of this paper is to report the case of a patient diagnosed with Hermansky-Pudlak syndrome, as a result of bleeding diathesis. Clinical Presentation and Intervention. A 23-year-old male presented with recurrent epistaxis and, upon physical examination, was found to be remarkable for albinism and suborbital ecchymosis. The absence of dense bodies in the platelets was demonstrated using electron microscopy. This patient was (slowly administered one unit of a platelet suspension, and his bleeding decreased considerably. Conclusion. This case shows that Hermansky-Pudlak syndrome should be considered in the differential diagnosis of a patient presenting with bleeding diathesis, when the clinical presentation also includes oculocutaneous albinism and visual problems.

Refeeding syndrome or refeeding hypophosphatemia: a systematic review of cases.

Science.gov (United States)

Skipper, Annalynn

2012-02-01

Nutrition support clinicians refer to the abnormalities in laboratory data and changes in clinical signs and symptoms that follow refeeding of starved or malnourished patients as refeeding syndrome. Theoretical descriptions of refeeding syndrome include a complex and extensive list of changes, such as hypophosphatemia, hypomagnesemia, hypokalemia, hyponatremia, hypocalcemia, hyperglycemia, and vitamin deficiency--all of which are accompanied by clinical signs and symptoms. In practice, clinicians see asymptomatic refeeding hypophosphatemia more often than a full-blown syndrome with multiple laboratory and clinical abnormalities. Confusion results because there is no widely accepted or uniformly applied set of defining characteristics for diagnosing refeeding syndrome. To gain insight into the clinical characteristics of refeeding syndrome described in the literature, a systematic review of reported cases and case series was conducted. Since 2000, 20 authors described 27 cases that contained sufficient data for review. Hypophosphatemia occurred in 26 patients (96%). While 19 patients (71%) experienced at least 1 other laboratory abnormality, only 14 (51%) exhibited a consistent pattern of abnormally low phosphorus and magnesium levels. Seven patients had hypocalcemia (26%), and hyponatremia was reported in 3 patients (11%). There were no reports of hyperglycemia. Mean data reported in case series containing data from 63 patients showed that hypophosphatemia was a consistent finding but that other abnormalities were not consistently identified. Findings suggest that refeeding hypophosphatemia is not accompanied by a consistent pattern of biochemical or clinical abnormalities among case reports or case series of patients reported to have refeeding syndrome.

[Report of a case with Joubert syndrome and literature review].

Science.gov (United States)

Yi, Ya-hui; Li, Gang; Lu, Zhong-lie; Zhou, Jian-sheng; Yao, Zhen-wei; Wang, Peng-fei; Yao, Jin-xiang

2011-12-01

To explore the clinical feature, imaging and their diagnostic value for Joubert syndrome (JS). The clinical data, imaging feature, and 31 references from China Biomedical literature database (CBMdise) were reviewed and analyzed. The age of onset of 32 patients including male 20 and female 12 ranged from 3 days to 6 years (mean 2.2 years). All the 32 patients with Joubert syndrome showed "slow growth" and "reduced muscle tension", 26 cases (81.3%) showed "gasp for breath", 26 cases (81.3%) showed "unusual motion of eyeball", 2 cases (6.3%) showed additional fingers (toes), 6 cases (18.8%) showed stretching tongue with agape. The typical imaging features of Joubert syndrome included "molar tooth sign", "midline cleavage" between cerebellar hemispheres and "bat-wing" like fourth ventricle, all the 32 patients with Joubert syndrome showed "midline cleavage", "molar tooth sign" was present in 29 cases (90.1%), and "bat-wing" like fourth ventricle in 30 cases (93.8%). Joubert syndrome is a rare congenital brain malformation. The typical clinical manifestations included "gasp for breath", "reduced tension of muscle", "slow growth" and "unusual motion of eyeball", and at the same time the patients had the following typical imaging features of brain: "molar tooth sign", "midline cleavage" and "bat-wing" like fourth ventricle.

Kallmann syndrome and ichthyosis: a case of contiguous gene deletion syndrome

Directory of Open Access Journals (Sweden)

Irene Berges-Raso

2017-09-01

Full Text Available Kallmann syndrome is a genetically heterogeneous form of hypogonadotropic hypogonadism caused by gonadotropin-releasing hormone deficiency and characterized by anosmia or hyposmia due to hypoplasia of the olfactory bulbs; osteoporosis and metabolic syndrome can develop due to longstanding untreated hypogonadism. Kallmann syndrome affects 1 in 10 000 men and 1 in 50 000 women. Defects in 17 genes, including KAL1, have been implicated. Kallmann syndrome can be associated with X-linked ichthyosis, a skin disorder characterized by early onset dark, dry, irregular scales affecting the limb and trunk, caused by a defect of the steroid sulfatase gene (STS. Both KAL1 and STS are located in the Xp22.3 region; therefore, deletions in this region cause a contiguous gene syndrome. We report the case of a 32-year-old man with ichthyosis referred for evaluation of excessive height (2.07 m and weight (BMI: 29.6 kg/m2, microgenitalia and absence of secondary sex characteristics. We diagnosed Kallmann syndrome with ichthyosis due to a deletion in Xp22.3, a rare phenomenon.

Testing as a service with HammerCloud

International Nuclear Information System (INIS)

Llamas, Ramón Medrano; Barrand, Quentin; Sciabà, Andrea; Ster, Daniel van der; Elmsheuser, Johannes; Legger, Federica; Sciacca, Gianfranco

2014-01-01

HammerCloud was designed and born under the needs of the grid community to test the resources and automate operations from a user perspective. The recent developments in the IT space propose a shift to the software defined data centres, in which every layer of the infrastructure can be offered as a service. Testing and monitoring is an integral part of the development, validation and operations of big systems, like the grid. This area is not escaping the paradigm shift and we are starting to perceive as natural the Testing as a Service (TaaS) offerings, which allow testing any infrastructure service, such as the Infrastructure as a Service (IaaS) platforms being deployed in many grid sites, both from the functional and stressing perspectives. This work will review the recent developments in HammerCloud and its evolution to a TaaS conception, in particular its deployment on the Agile Infrastructure platform at CERN and the testing of many IaaS providers across Europe in the context of experiment requirements. The first section will review the architectural changes that a service running in the cloud needs, such an orchestration service or new storage requirements in order to provide functional and stress testing. The second section will review the first tests of infrastructure providers on the perspective of the challenges discovered from the architectural point of view. Finally, the third section will evaluate future requirements of scalability and features to increase testing productivity.

Gorlin-Goltz syndrome: A series of three cases.

Science.gov (United States)

Patankar, Amod P; Kshirsagar, Rajesh A; Dugal, Arun; Mishra, Akshay; Ram, Hari

2014-01-01

The Gorlin-Goltz syndrome (GGS) is also known as nevoid basal cell carcinoma syndrome. It is characterized by multiple keratocystic odontogenic tumors (KCOTs) in the jaw, multiple basal cell nevi carcinomas and skeletal abnormities. The syndrome may be diagnosed early by a dentist during the routine radiographic exams in the first decade of life, since the KCOTs are usually one of the first manifestations of the syndrome. This article reports the series of 3 cases, emphasizing its clinical and radiographic manifestations of GGS.

The Antley-Bixler syndrome: two new cases.

Directory of Open Access Journals (Sweden)

Hosalkar H

2001-10-01

Full Text Available The Antley-Bixler syndrome is a rare multiple congenital anomaly with a high mortality rate. The characteristic manifestations include craniosynostosis, radiohumeral synostosis, midface hypoplasia, joint contractures and arachnodactyly. We report two new cases of this syndrome and address the diagnostic features, associated malformations, inheritance patterns, prenatal findings, and briefly review the literature.

Asperger syndrome related suicidal behavior: two case studies

Directory of Open Access Journals (Sweden)

Kocourkova J

2013-11-01

Full Text Available Jana Kocourkova, Iva Dudova, Jiri Koutek Department of Child Psychiatry, Charles University Second Faculty of Medicine, University Hospital Motol, Prague, Czech Republic Abstract: Asperger syndrome hinders adaptation to developmental challenges during childhood and adolescence, particularly with regard to interpersonal relationships. Individuals with Asperger syndrome display lack of empathy and limited ability to understand social and emotional exchanges with other people. Individuals with Asperger syndrome are significantly exposed to the risk of suicidal behavior, especially during adolescence. The authors describe cases of suicidal behavior in two adolescent boys with Asperger syndrome. Keywords: Asperger syndrome, suicidal behavior, adolescence

Three cases of Wolfram syndrome with different clinical aspects.

Science.gov (United States)

Çamtosun, Emine; Şıklar, Zeynep; Kocaay, Pınar; Ceylaner, Serdar; Flanagan, Sarah E; Ellard, Sian; Berberoğlu, Merih

2015-03-01

Wolfram syndrome is an autosomal recessive disorder caused by mutations in the WFS1 gene. Clinical heterogeneity has been reported both within and between families with WFS1 mutations. The first case was diagnosed with insulin-dependent diabetes mellitus with positive for pancreatic autoantibodies and had a ketoacidotic attack in the follow-up period. The second case presented initially with optic atrophy and was diagnosed with behavioral and psychiatric problems at an early age. The third case had early onset insulin-dependent diabetes with multiple anomalies and congenital hypothyroidism. Many of these features have not been reported previously in patients with Wolfram syndrome. In all three patients homozygous mutations in WFS1 were identified. Wolfram syndrome is a disease where the characteristic features may present at different times. A diagnosis of Wolfram syndrome should therefore be considered even in the absence of the full spectrum of clinical features.

Primary sialoangiectasia - a diagnostic pitfall in Sjogren's syndrome - Case report

NARCIS (Netherlands)

Kalk, WWI; Vissink, A; Spijkervet, FKL; Bootsma, H

A case of primary sialoangiectasia, which in this case was initially misdiagnosed as Sjogren's syndrome, is described. Other diseases, including HIV infection, psoriatic arthritis, and acute parotitis, may cause glandular changes similar to the changes found in the syndrome. Therefore, sialography

Gorlin-Goltz syndrome: A rare case report.

Science.gov (United States)

Pol, Chetan A; Ghige, Suvarna K; Kalaskar, Ritesh R; Gosavi, Suchitra R

2013-10-01

Gorlin-Goltz syndrome is an uncommon autosomal dominant inherited disorder characterized by numerous basal cell carcinomas, odontogenic keratocysts (OKCs) and musculoskeletal malformations. A rare case of this syndrome observed in a 13-year-old male patient is presented in which multiple OKCs were causing disfigurement of the lower jaw as well as displacement and malocclusion of the teeth. Early diagnosis and treatment of this syndrome is important to reduce the severity of complications including cutaneous and cerebral malignancy and oromaxillofacial deformation and destruction due to jaw cysts.

Straatsma syndrome: two case reports

Directory of Open Access Journals (Sweden)

Gabriela Nogueira

Full Text Available Abstract This article reports two cases of Straatsma Syndrome, a rare disease, emphasizing its clinical features that inclued myopia, strabismus and amblyopia associated with persistent myelinated fibers in the retina. Ophthalmic examination, color retinography and optical coherence tomography were performed.

Gorlin Syndrome with Bilateral Polydactyly: A Rare Case Report

Science.gov (United States)

Acharya, Sonu; Panda, Swagatika; Sahoo, Sujit Ranjan; Ray, Prayas

2013-01-01

ABSTRACT Gorlin's syndrome is a rare disorder transmitted as an autosomal dominant trait. It is characterized by multiple disorders involving multiple systems. We present a case of 11-year-old male child presenting with multiple odontogenic keratocyst to the dental clinic. Retrograde diagnosis of Gorlin-Goltz syndrome was made after clinical and radiological investigation. How to cite this article: Acharya S, Panda S, Dhull KS, Sahoo SR, Ray P. Gorlin Syndrome with Bilateral Polydactyly: A Rare Case Report. Int J Clin Pediatr Dent 2013;6(3):208-212. PMID:25206225

Fryns anophthalmia-plus syndrome: two rare cases.

Science.gov (United States)

Bozkurt, O; Bidev, D; Sari, F N; Dizdar, E A; Ulu, H O; Uras, N; Oguz, S S; Canpolat, F E; Dilmen, U

2014-01-01

Fryns anophthalmia-plus syndrome is a rare syndrome with clinical diversity primarily including anophthalmia/microphthalmia, facial clefts, cleft lip/palate, ear and nasal deformities. Here we present two different cases of APS with anopthalmia/microphthalmia, cleft palate, low set ears, ventriculomegaly and one of which had intestinal non-fixation anomaly not described in the literature before.

Down Syndrome and Fragile X Syndrome in a Colombian Woman: Case Report

Science.gov (United States)

Saldarriaga, Wilmar; Ruiz, Fabian Andres; Tassone, Flora; Hagerman, Randi

2017-01-01

Background: Down syndrome (DS) and Fragile X syndrome (FXS) are the major genetic causes of intellectual disabilities. Here, we present a case of a 32-year-old woman with the diagnosis of both FXS and DS. She is the daughter of a 47-year-old pre-mutation woman who also has three sons with FXS. Methods: Cytogenetic testing detected the presence of…

[Two cases of rehabilitation in Ehler-Danlos syndrome].

Science.gov (United States)

Le Tallec, H; Lassalle, A; Khenioui, H; Durufle, A; Plassat, R; Gallien, P

2006-03-01

Ehlers-Danlos syndrome is rare and little known. It comprises a heterogeneous group of heritable connective tissue disorders characterized by articular hypermobility, skin extensibility and tissue fragility. Diagnosis may be difficult and often delayed. Here we describe 2 cases of women with Ehlers-Danlos syndrome. The first had scoliosis with back pain and joint hypermobility. The second presented with hypermobility and joint dislocation, which increased during pregnancy. In these 2 cases, rehabilitation management produced clinical improvement. Orthopaedic complications such joint pain, joint swelling, joint dislocation, back pain, with walking and hand function disability are the main problems in Ehlers-Danos syndrome. Surgery may be necessary to correct dislocated joints but is often not sufficient to resolve the handicap, and physical therapy has an important place in management. Ehlers-Danlos syndrome is an evolving disease that can lead to great impairment. Thus, physicians must be aware of this syndrome to offer the best management, with the appropriate use of orthotic devices, specific strengthening routines, education in proper body mechanics and assistive devices, to prevent joint dislocation and subluxations responsible for pain and handicap.

Analysis of mixed oxides critical experiments using the Hammer-Technion code with self-shielding treatment by Bondarenko method

International Nuclear Information System (INIS)

Abe, Alfredo Y.; Santos, Adimir dos

1995-01-01

The present work summarizes the verification of the treatment of self-shielding based on Bondarenko method in HAMMER-TECHNION cell code for the Pu O 2 -U O 2 critical system using JENDL-3 nuclear data library. The results obtained are in excellent agreement with the original treatment of self-shielding employed by HAMMER-TECHNION cell code. (author). 9 refs, 1 fig, 9 tabs

A case of idiopathic intracranial calcifications - Hahr syndrome

International Nuclear Information System (INIS)

Georgiev, R.; Balev, B.; Georgieva, M.; Georgiev, J.

2006-01-01

Full text: The purpose of the study is to review the clinical manifestation, imaging characteristics and pathophysiology of the Fahr syndrome and to present a case of the Fahr syndrome from our clinic. The Fahr syndrome is a rare neurodegenerative disorder, characterized by seizures, tetany, psychomotor retardation, development of a spastic paralysis, athetosis and parkinson like syndrome. It is inherited by an AR way but in affected families (relatives) an AD way is also possible. Sporadic cases have been known. Recently a possible chromosome locus on 14q was proved. Probably the case in point is a group of anomalies, in which symmetrically and bilaterally significant calcifications in the region of the basal ganglia, dentate nuclei in cerebellum and centrum semiovale are found. It is not clear yet whether these calcifications are a result from a 'metastatic' deposition because of a local destruction of the blood-brain barrier or are due to a disturbance in the neuronic calcium metabolism. The X-ray findings could be accidental in an asymptomatic patient but a progressive development of an extrapyramidal syndrome may be also observed. Our case is a 37 years old woman with seizures with loss of consciousness, convulsions and urine incontinence. The complaints are dated from the age of 5 years old. The X-ray images disclosed striking non-natural calcifications in globus pallidus, putamen, n.caudatus, thalami, n.dentati, cerebellum.The blood test revealed normal serum levels of calcium, phosphorus, alkaline phosphatase. The CT findings put together with the typical clinical history and the normal blood test were a prerequisite for this diagnosis

Megacystis-microcolon-intestinal hypoperistalsis syndrome associated with prune belly syndrome: a case report.

Science.gov (United States)

Akhtar, Tanveer; Alladi, Anand; Siddappa, O S

2012-01-01

Megacystis Microcolon Intestinal Hypoperistalsis Syndrome is a quite rare congenital anomaly that presents with a functional obstruction of the gastrointestinal tract which is usually fatal. It is three to four times more prevalent in females. We present a case of a rare association of a male neonate with Megacystis Microcolon Intestinal Hypoperistalsis Syndrome who in addition had the classical triad of Prune Belly Syndrome and thus suggest a possibility of different spectrums with a common pathogenesis.

A Case with Repeated Recurrent Acute Coronary Syndrome due to Pseudoephedrine Use: Kounis Syndrome

Directory of Open Access Journals (Sweden)

Metin Çeliker

2014-01-01

Full Text Available Allergic reaction-associated acute coronary syndrome picture is defined as Kounis syndrome. Although drug use is the most common cause of allergic reaction, foods and environmental factors may also play a role in the etiology. Herein, a case with acute coronary syndrome that developed two times at 8-month interval due to pseudoephedrine use for upper respiratory tract infection is presented.

An unusual case of nephrotic syndrome

Directory of Open Access Journals (Sweden)

M Sahay

2016-01-01

Full Text Available Nephrotic syndrome can be rarely due to inherited disorders of enzymes. One such variety is lecithin cholesterol acyltransferase deficiency. It leads to accumulation of unesterified cholesterol in the eye and other organs. We report a case of nephrotic syndrome with cloudy cornea and hypocholesterolemia with foam cells and lipid deposits on renal biopsy. Awareness about this rare disease may help in the early institution of specific measures to prevent progression to end-stage renal disease.

A Case of Bardet-Biedl Syndrome

Directory of Open Access Journals (Sweden)

katayon Etemadi

2007-09-01

Full Text Available Etemadi K1, Khazaii MR2 1. MSC of Human Genetic, Molecular Medicine and Genetic department, Medical school, Hamadan University of medical sciences. 2. Assistant professor of Pediatric Urology Abstract Background: The Bardet Biedl syndrome is a heterogenous and autosomal recessive disorder. Primary features are: retinitis pigmentosa, obesity, polydactyly, mental retardation, renal abnormalities and hypogonadism. Renal failure is the major cause of death in homozygote patients, with chronic glomerolopathy that cause chronic renal disease. Secondary features are: speech disorder delay, developmental delay, polyuria, diabetes mellitus and hypertension. The diagnosis of Bardet- Biedl syndrome is established by clinical findings. Twelve genes are known to be associated with Bardet Biedl syndromes: BBS1, BBS2… BBS12. Case presentation: In this article we report a four and half year old boy that have Bardet Biedl syndrome as a result of a consanguine marriage (third degree. Conclusion: A monogenic syndrome such as Bardet Biedl has a lot of symptoms. These symptoms are out put of a mutation in locus of a recessive allel. Therefore people like to marry consanguinly have to do genetic counseling before marriage. Because analysis of family history will reduced the risk of such syndromes.

Carpal Tunnel Syndrome in Aberrant Muscle Syndrome: A Case Report and Review of the Literature.

Science.gov (United States)

Steele, Jessica; Coombs, Christopher

2018-06-01

Aberrant Muscle Syndrome (AMS) is a rare congenital hand difference that is characterised by unilateral non-progressive muscular hyperplasia. The aetiology of aberrant muscle syndrome is not known, but a recently published case has shown a somatic PIK3CA activating mutation in a patient with AMS. Carpal tunnel syndrome (CTS) in children is rare. The most common causes are the mucopolysaccaridoses but space-occupying lesions have also been reported to cause CTS in children. We report the first case of CTS in a child with AMS successfully treated with open carpal tunnel release and excision of aberrant muscles.

Gorlin-Goltz syndrome: A rare case report

Directory of Open Access Journals (Sweden)

Chetan A Pol

2013-01-01

Full Text Available Gorlin-Goltz syndrome is an uncommon autosomal dominant inherited disorder characterized by numerous basal cell carcinomas, odontogenic keratocysts (OKCs and musculoskeletal malformations. A rare case of this syndrome observed in a 13-year-old male patient is presented in which multiple OKCs were causing disfigurement of the lower jaw as well as displacement and malocclusion of the teeth. Early diagnosis and treatment of this syndrome is important to reduce the severity of complications including cutaneous and cerebral malignancy and oromaxillofacial deformation and destruction due to jaw cysts.

OROFACIAL FINDINGS IN NOONAN SYNDROME: A CASE REPORT

Directory of Open Access Journals (Sweden)

Raluca Maria MOCANU

2013-06-01

Full Text Available Noonan syndrome is an autosomal dominant multisys‐ tem disorder, associated with cardiac anomalies and a dis‐ tinctive facial appearance, characterized by genetic heterogeneity. Noonan syndrome affects both females and males, and has an estimated incidence of 1 per 1,000‐2,500 live births. The present report aims at presenting the cranio‐dento‐facial findings in a case of Noonan syndrome in a 6 year‐old male.

DRESS syndrome with thrombotic microangiopathy revealing a Noonan syndrome: Case report.

Science.gov (United States)

Bobot, Mickaël; Coen, Matteo; Simon, Clémentine; Daniel, Laurent; Habib, Gilbert; Serratrice, Jacques

2018-04-01

The life-threatening drug rash with eosinophilia and systemic symptoms (DRESS) syndrome occurs most commonly after exposure to drugs, clinical features mimic those found with other serious systemic disorders. It is rarely associated with thrombotic microangiopathy. We describe the unique case of a 44-year-old man who simultaneously experienced DRESS syndrome with thrombotic microangiopathy (TMA) after a 5 days treatment with fluindione. Clinical evaluation leads to the discovery of an underlying lymphangiomatosis, due to a Noonan syndrome. The anticoagulant was withdrawn, and corticosteroids (1 mg/kg/day) and acenocoumarol were started. Clinical improvement ensued. At follow-up the patient is well. The association of DRESS with TMA is a rare condition; we believe that the presence of the underlying Noonan syndrome could have been the trigger. Moreover, we speculate about the potential interrelations between these entities.

Prune Belly Syndrome in Adolescence: A Case Report

Directory of Open Access Journals (Sweden)

Prasad Mylarappa

2015-01-01

Full Text Available The Prune Belly syndrome also known as Eagle Barret syndrome is a rare disorder. We report a rare case of Prune Belly syndrome in 17 year old boy. Patient presented with complains of absence of both testis in scrotum since birth. On examination patient was found to have lax abdominal wall. Patient was further evaluated and found to have shrunken small right kidney and left hydroureteronephrosis and the diagnosis of Prune Belly Syndrome was made. Prune Belly Syndrome represents a wide spectrum of disease. Each patient must be dealt with on an individual basis. A course of watchful waiting with selective surgical intervention has also been successful.

Gilles de la Tourette's syndrome in a patient with 47(XXX syndrome: a case report

Directory of Open Access Journals (Sweden)

Chiappedi Matteo

2011-11-01

Full Text Available Abstract Introduction To the best of our knowledge, this is the first report of a comorbidity between Gilles de la Tourette's syndrome and 47 (XXX syndrome. The clinical picture of Gilles de la Tourette's Syndrome is well described, while 47 (XXX syndrome is much more rare and has a broader spectrum of possible phenotypic presentations. Case presentation An Italian Caucasian girl was referred at the age of 11 to our Rehabilitation Center for anxiety and learning difficulties. The girl had already been diagnosed as having 47(XXX syndrome; she had some rather typical features of the chromosomal abnormality, but she also showed a high level of anxiety and the presence of motor and vocal tics. When an accurate history was taken, a diagnosis of Gilles de la Tourette's Syndrome emerged. Conclusions The possible interaction between peculiar features of these two syndromes in terms of neuropsychological and affective functioning is both interesting for the specific case and to hypothesize models of rehabilitation for patients with one or both syndromes. Executive functions are specifically reduced in both syndromes, therefore it might be hard to discriminate the contribution of each one to the general impairment; the same applies to anxiety. Moreover, mental retardation (with a significantly lower verbal cognitive functioning poses relevant problems when suggesting cognitive behavioral or psychoeducational rehabilitative approaches.

Successful treatment with tacrolimus in TAFRO syndrome: two case reports and literature review.

Science.gov (United States)

Shirai, Taiichiro; Onishi, Akira; Waki, Daisuke; Saegusa, Jun; Morinobu, Akio

2018-06-01

TAFRO syndrome is a systemic inflammatory disorder characterized by thrombocytopenia, anasarca, fever, reticulin fibrosis, renal dysfunction, and organomegaly. In contrast to that in multicentric Castleman disease, interleukin-6 targeting strategies seem ineffective in some TAFRO syndrome cases; however, the optimal treatment remains unclear. Here, we report 2 cases of TAFRO syndrome, where 1 with cardiomyopathy, successfully treated with tacrolimus. This is the first case report of successful treatment with tacrolimus in TAFRO syndrome. Both patients (cases 1 and 2) developed fever, anasarca, thrombocytopenia, renal dysfunction, and mild hepatosplenomegaly. In both patients, lymph node pathology revealed mixed type Castleman disease-like features, and bone marrow showed reticulin myelofibrosis. TAFRO syndrome was diagnosed based on the patients' laboratory, clinical, and pathologic findings. In case 2, we observed a rare complication of cardiomyopathy with no evidence of takotsubo cardiomyopathy or viral myocarditis. In case 1, tocilizumab combined with glucocorticoids was ineffective and caused septic shock; additionally, cyclosporine A was discontinued because of hepatotoxicity. However, tacrolimus was effective in resolving TAFRO syndrome without any adverse events. In case 2, tacrolimus completely reversed TAFRO syndrome and was also effective in cardiomyopathy. This report suggests that tacrolimus is potentially effective and safe as an initial treatment and a glucocorticoid-sparing agent. Our literature review shows that calcineurin inhibitors, including tacrolimus, may be effective in TAFRO syndrome. Since previous studies indicate a role of Th1 inflammation in TAFRO syndrome pathogenesis, tacrolimus may, therefore, be effective in treating TAFRO syndrome.

On the prediction of impact noise, V: The noise from drop hammers

Science.gov (United States)

Richards, E. J.; Carr, I.; Westcott, M.

1983-06-01

In earlier papers in this series, the concepts of "acceleration" and "ringing" noise have been studied in relation to impact machines, and values of radiation efficiency have been obtained for the various types of structural components. In the work reported in this paper the predicted and measured noise radiation from a drop hammer, both in full-scale and in {1}/{3}- scale model form, were examined. It is found that overall noise levels ( Leq per event) can be predicted from vibration measurements to within ± 1·5 dB, and to within ±2·5 dB in one-third octave bands. In turn this has permitted noise reduction techniques to be examined by studies of local component vibration levels rather than overall noise, a method which provides considerable enlightenment at the design stage. It is shown that on one particular drop hammer, the noise energy is shared surprisingly uniformly over four or five sources, and that when these have been reduced, the overall noise reduction is severely limited by the "acceleration" noise from the "tup" or "hammer" itself. As this is difficult to eliminate without a basic change in forging technology, it follows that "tup" enclosure or modification of the sharpness of the final "hard" impact are the only means available for any serious noise reduction. Also indicated is the reliability of using model techniques, suitably scaled in frequency and impulse magnitude, in developing machinery with impact characteristics.

Quality assurance for hammer forgings

International Nuclear Information System (INIS)

Potthast, E.

1984-01-01

The quality assurance program introduced by Arbed Saarstahl and laid down in a quality assurance manual is described. A particular attention is attached thereby both to quality practice proper and to a reliable flow of information amongst all the persons involved. The production and test sequence schedules of the hammer forging plant are illustrated by the example of a forged valve housing for nuclear power plants. These schedules specify not only the forging process in the individual production stages but also the workpiece contour after each working operation, the heat treatment, the furnace charging, and the inspection of finished parts. The formalization of the tests is designed both to promote the customer's trust towards the supplier and to prevent the formal operations involved from hindering further technical development. (orig.) [de

Water hammer reduces fouling during natural water ultrafiltration.

Science.gov (United States)

Broens, F; Menne, D; Pothof, I; Blankert, B; Roesink, H D W; Futselaar, H; Lammertink, R G H; Wessling, M

2012-03-15

Today's ultrafiltration processes use permeate flow reversal to remove fouling deposits on the feed side of ultrafiltration membranes. We report an as effective method: the opening and rapid closing of a valve on the permeate side of an ultrafiltration module. The sudden valve closure generates pressure fluctuations due to fluid inertia and is commonly known as "water hammer". Surface water was filtrated in hollow fiber ultrafiltration membranes with a small (5%) crossflow. Filtration experiments above sustainable flux levels (>125 l (m2h)(-1)) show that a periodic closure of a valve on the permeate side improves filtration performance as a consequence of reduced fouling. It was shown that this effect depends on flux and actuation frequency of the valve. The time period that the valve was closed proved to have no effect on filtration performance. The pressure fluctuations generated by the sudden stop in fluid motion due to the valve closure are responsible for the effect of fouling reduction. High frequency recording of the dynamic pressure evolution shows water hammer related pressure fluctuations to occur in the order of 0.1 bar. The pressure fluctuations were higher at higher fluxes (higher velocities) which is in agreement with the theory. They were also more effective at higher fluxes with respect to fouling mitigation. Copyright © 2011 Elsevier Ltd. All rights reserved.

A case report of acute myelogenous leukemia with Turner Syndrome.

Science.gov (United States)

Siddiqui, Nadir; Ali Baig, Mirza Faris; Khan, Bilal Ahmed

2017-09-01

Turner Syndrome was diagnosed in a 45 years old female, known case of Acute Myeloid Leukaemia (AML) with maturation, on Bone Marrow biopsy. She presented with blurred vision, vertigo, exertional dyspnoea and insomnia. She did not show the typical features of Turner syndrome, but her cytogenetis confirmed the diagnosis. Bone marrow biopsy showed diffuse infiltration of blast cells with cellularity around 80-85% and haematopoietic suppression. Karyotype analysis showed: 45 X, -X, t (8; 21) (q22; q22) [According to The International System for Human Cytogenetic Nomenclature (ISCN)]. Turner syndrome is caused by partial or complete absence of second X chromosome in a female. It is known to have Cardiovascular and Reproductive complications but it is rare to find haematologic malignancies. There are few similar reported cases of AML associated with Turner syndrome, therefore this is a unique case presented to Jinnah Postgraduate Medical Center, Karachi, Pakistan and further research should be done to identify more similar cases to explore the prognostic significance of this association.

Mayer–Rokitansky–Kuster–Hauser syndrome: Syndrome of Mullerian agenesis – A report of two cases

Directory of Open Access Journals (Sweden)

Sushma Yalavarthi

2017-01-01

Full Text Available The Mayer–Rokitansky–Kuster–Hauser syndrome (MRKH syndrome, simply called Rokitansky syndrome or vaginal aplasia of the uterus, is a congenital condition that is characterized by the absence of the uterus and vagina, but ovaries are present and the external genitalia are normal. It affects at least 1 out of 4500 women. MRKH may be isolated (Type I, but it is more frequently associated with renal, vertebral, and to a lesser extent, auditory and cardiac defects (MRKH Type II or Mullerian duct aplasia, Renal dysplasia, and Cervical Somite anomalies association - mullerian duct aplasia, renal dysplasia, and cervical somite anomalies. There were very few cases of MRKH syndrome reported in the literature. Here, we report two cases of MRKH syndrome, one in a 20-year-old woman who presented with primary amenorrhea (MRKH Type I and the other in a 65-year-old woman with primary amenorrhea and associated renal malformations and a rare ovarian sertoliform variant of endometrioid tumor (MRKH Type II.

A strange case of Evans syndrome

Directory of Open Access Journals (Sweden)

Manuel Monti

2013-12-01

Full Text Available Evans syndrome is a rare autoimmune disease presenting hemolytic anemia, thrombocytopenia and/or neutropenia. It may be associated with other autoimmune or lymphoproliferative diseases. It can have an extremely serious disease course and, in rare cases, this can even be life-threatening. First-line treatment consists of steroids and/or immunoglobulin. Further therapy with rituximab, vincristine, cyclophosphamide and other immunosuppressive drugs can be considered in unresponsive patients. We report a case of Evans syndrome in a 54-year old woman admitted to the Emergency Department (ED for asthenia. Etiopathogenic, clinical, therapeutic and evolutive aspects are discussed. In contrast to many cases described in the literature, our patient had a satisfactory response to corticoids. We also discuss how to make a specific diagnosis, even in a suburban ED with limited resources, in order to admit patients to the appropriate hospital department and allow the correct therapy to be started as early as possible.

Alagille syndrome case report: implications for forensic pathology and anthropology.

Science.gov (United States)

Petaros, Anja; Miletic, Damir; Stifter, Sanja; Slaus, Mario; Stemberga, Valter

2015-05-01

This case report offers a multidisciplinary interpretation of the violent death of a 4-year-old girl suffering from Alagille syndrome who died after a low-height fall that resulted in temporal bone fracture and a large epidural hematoma. The article evidences the macroscopical and microscopical characteristics of the syndrome, focusing especially on the skeletal findings that emerged during autopsy. In the case report, distinction is made between a possible accidental or non-accidental nature of the injuries and the characteristics of the injury have been interpreted in the light of the existing data on Alagille syndrome. In conclusion, the death was documented as accidental since abnormalities in the skeletal system evidenced during autopsy have predisposed the death of the child albeit through a very mild head trauma. The case report evidences the importance of studying features of skull macro- and microstructure in patients with Alagille syndrome, which have been, until now, underreported in literature and which might contribute to fracture vulnerability in these patients. Although rare, Alagille syndrome is a condition that should be known to forensic medicine practitioners and whose features and peculiarities must be taken into consideration in pediatric autopsy and suspected child abuse cases.

NEONATAL ABSTINENCE SYNDROME - CASE REPORT

Directory of Open Access Journals (Sweden)

Aleksandra Matic

2008-01-01

Full Text Available Neonatal abstinence syndrome (NAS refers to the constellation of signs and symptoms exhibited by a newborn of drug-abusing mother. NAS is multisystemic disorder, most frequently involving central nervous and gastrointestinal systems with irritability, high-pitched cry, hyperactive reflexes, increased muscle tone, tremors, generalized convulsions, feeding and sleeping disorders, tachycardia, tachypnea, apnea, termolability and sweating, frequent hiccups, yawning and sneezing, vomiting, diarrhea and dehydration.Intrauterine narcotic disposition can give some other adverse effects beside NAS: fetal distress, premature birth, intrauterine growth retardation, microcephaly, increased incidence of congenital anomalies (cardiac and genitourinary anomalies, cleft palate, biliar atresia. Significantly increased risks of sudden infant’s death syndrome (SIDS, abnormalities in neurocognitive and behavioral development and deficiency in motor functions have also been noticed after the long-term surveys of these children.This paper is a case report of a newborn with developed clinical signs of NAS, but it also discusses diagnostics and management of such cases

Diogenes Syndrome: A Case Report

Directory of Open Access Journals (Sweden)

Projna Biswas

2013-01-01

Full Text Available Cessation of normal skin cleansing seen in geriatric or self-neglected patients can cause accumulation of keratinous crusts on the skin. In the extreme end of this spectrum is a condition known as Diogenes syndrome (DS. These patients may have psychiatric disorders like paranoid disorders, mood affection, or temporofrontal dementia. Subjects are mainly the elderly but few cases in younger age group of patients have also been reported. Lesions of DS are usually found over upper central chest, back, and groin. In the young, lesions are mainly found over scalp, face, or arms. Absence of normal skin cleaning causes keratin and dirty debris to accumulate and with time form a thick shell. These debris can be secondarily infected by bacteria, fungus, and so forth. These skin lesions are not usually seen in individual with proper hygiene. We report a case of Diogenes syndrome in a 34-year-old young male patient who had associated schizophrenia.

An Unusual Os Trigonum Syndrome Case Secondary to Car Accident: A Case Report

Directory of Open Access Journals (Sweden)

Safer

2016-03-01

Full Text Available Introduction The os trigonum syndrome is a common cause of posterior ankle pain, often affecting ballet dancers, soccer players, runners and gymnasts who frequently force the ankle into plantar flexion. In rare cases, onset of the os trigonum syndrome followed an acute injury. Case Presentation A 62-year-old female patient was admitted with load depended ankle pain and swelling, lasting for five years which promptly started after a car accident. We incidentally discovered os trigonum on plain radiography on a lateral view of the right ankle. Conclusions The os trigonum syndrome should take in consideration in elderly subject who had posterior ankle pain starting after a car accident.

Clinicai analysis of 12 cases with Tourtte Syndrome

Institute of Scientific and Technical Information of China (English)

Lu Xiudong; Dong Aiqin; Meng Suqi

2000-01-01

Objective To in vestigate the diagnosis and treatment of Toarette Syndrome. Method We studied the clinical features and drug therapy of 12 cases with Tourette Syndrome, 10 male, 2 female,1l with age of 7-16 years, 1 was 40 years old. The major symptoms were multiple tic seizure, Companied bystrange voices episode. The CT scan did not find abnormal changes. Wechsler intelligence tests were normal. All patients were giveu Tabellae Tiapridi, 150 to 300ms daily for 6-10 months. Result 5 cases were completely cured, 3 were obviously effective, 2 were improved, 2 were unhelpful. The effective rate was more than 80 per cent. Conclusion Tourette Syndrome is a frequent chronic neural psychical disorder in child. The treatment with Tiapridi was secure and effective.

[Psychosis Associated With Fahr's Syndrome: A Case Report].

Science.gov (United States)

Cassiani-Miranda, Carlos Arturo; Herazo-Bustos, Mariana; Cabrera-González, Armando; Cadena-Ramos, Ivan; Barrios-Ayola, Francisco

2015-01-01

Fahr syndrome (SF) is a rare neurological disorder, characterized by abnormal deposition of calcium in brain areas that control movement. The case is presented of a 41-year-old female with a convulsive syndrome, psychotic disorder, neurocognitive disorde,r and intellectual disability associated with bilateral brain calcifications and altered calcium/phosphorus metabolism in the context of hypoparathyroidism. Case report. The calcifications found in the patient could be the cause of psychotic symptoms and cognitive impairment. Diagnostic imaging, laboratory tests, psychiatric and neuropsychological assessments are presented. The clinical presentation of this case is compared with similar ones reported in the literature. Therapeutic approaches and clinical outcomes are described. Fahr's syndrome should be suspected in patients with neuropsychiatric disorders and seizures. Neuroimaging studies, and the determining of phosphorus and calcium metabolism and parathyroid hormone levels are important in this type of patient. Copyright © 2015 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Dress Syndrome - A Case Report

Directory of Open Access Journals (Sweden)

Kremić Zorana

2016-06-01

Full Text Available The drug reaction with eosinophilia and systemic symptoms (DRESS syndrome is an adverse drug-induced reaction that occurs most commonly after exposure to drugs, most frequently anticonvulsants, sulfa derivates, antidepressants, nonsteroidal anti-inflammatory drugs, and antimicrobials. We present a 61-year-old male, with a generalized maculopapular exanthema on the trunk, face, extremities, palms, soles, palate, and fever (38°C. His medical history was notable for generalized epilepsy, treated with carbamazepine during 1 month. The diagnosis of DRESS syndrome was confirmed by specific RegiSCAR criteria. In our case, skin eruptions were successfully treated with oral methylprednisolone, cephalexin, and topical corticosteroid ointment.

X-derived marker chromosome in patient with mosaic Turner syndrome and Dandy-Walker syndrome: a case report

OpenAIRE

Telepova, Alena S.; Romanenko, Svetlana A.; Lemskaya, Natalya A.; Maksimova, Yulia V.; Shorina, Asia R.; Yudkin, Dmitry V.

2017-01-01

Background Small supernumerary marker chromosomes can be derived from autosomes and sex chromosomes and can accompany chromosome pathologies, such as Turner syndrome. Case presentation Here, we present a case report of a patient with mosaic Turner syndrome and Dandy-Walker syndrome carrying a marker chromosome. We showed the presence of the marker chromosome in 33.8% of blood cells. FISH of the probe derived from the marker chromosome by microdissection revealed that it originated from the ce...

Water-hammer experiences in the startup and early operation of the Shearon Harris plant

International Nuclear Information System (INIS)

Casada, D.

1987-01-01

During the startup testing and initial operation of any power plant, systems undergo planned transients to confirm their ability to respond as designed. In addition to planned testing, unplanned transients infrequently occur as equipment is initially used. Some of both the planned and unplanned transients result in water-hammer events. Several water-hammer events experienced during preoperational testing, power ascension testing, and early operation of the Shearon Harris nuclear power plant are presented. The cause, effect, and corrective actions undertaken to prevent recurrence for each event discussed are provided. In addition, examples of preventive measures taken, based on industry experience accrued at other plants, to prevent a similar occurrence at Shearon Harris are discussed

Osteomalacia in a Case of Adult-Onset Bartter Syndrome

Directory of Open Access Journals (Sweden)

Rashid Naseem Khan

2018-01-01

Full Text Available Bartter syndrome is a rare heterogeneous disease characterised by a deficiency in sodium and chloride absorption. Gain-of-function mutations in the CASR gene have been described in some patients with Bartter syndrome associated with hypocalcaemia and hypercalciuria. We describe a case of adult-onset Bartter syndrome with hypocalcaemia severe enough to cause osteomalacia.

Barr-Shaver-Carr Syndrome: a case report

Directory of Open Access Journals (Sweden)

Mohammad Reza Kalantar Hormozi

2010-04-01

Full Text Available There are different subtypes of Kline Felter syndrome which 48, XXXY is called Barr-Shaver-Carr syndrome. We present a 17 years old man who referred due to absence of puberty, micro penis decreased Intelligence quotient and also some other sign and symptoms. The presented case stresses performing of kariotype examination (chromosome analysis in the evaluation of patient with such problems.

Case Report : A Relieved Family with the Diagnosis of Wernicke-Korsakoff Syndrome

Directory of Open Access Journals (Sweden)

Ahmet Kokurcan

2014-02-01

Full Text Available Wernicke-Korsakoff Syndrome (WKS is a diagnosis formed from Wernicke ensephalopathy and Korsakoff Syndrome together. WKS is usually a chronic syndrome beginning acutely. Wernicke%u2019s encephalopathy is an acute syndrome composed of the triad of oculomotor signs; ataxia and confusion. B vitamines especially tiamine are considered to cause the syndrome. Korsakoff syndrome is a syndrome presenting with amnesia and amnesia is permanent in many cases. While Korsakoff syndrome is a continuation form of Wernicke; the syndromes are admitted as the acute and chronic conditions of the same pathophysiology. WKS syndrome means despair for many psychiatrists and the family unless treatment is initiated in the acute phase and irreversible cognitive impairment is prevented. We will discuss a case of WKS pleasing his family as nervousness has improved with cognitive impairment.

Concrete density estimation by rebound hammer method

International Nuclear Information System (INIS)

Ismail, Mohamad Pauzi bin; Masenwat, Noor Azreen bin; Sani, Suhairy bin; Mohd, Shukri; Jefri, Muhamad Hafizie Bin; Abdullah, Mahadzir Bin; Isa, Nasharuddin bin; Mahmud, Mohamad Haniza bin

2016-01-01

Concrete is the most common and cheap material for radiation shielding. Compressive strength is the main parameter checked for determining concrete quality. However, for shielding purposes density is the parameter that needs to be considered. X- and -gamma radiations are effectively absorbed by a material with high atomic number and high density such as concrete. The high strength normally implies to higher density in concrete but this is not always true. This paper explains and discusses the correlation between rebound hammer testing and density for concrete containing hematite aggregates. A comparison is also made with normal concrete i.e. concrete containing crushed granite

Koolitamine : andmisrõõm või edevus? / Ants Vasar, Arne Kaasik, Hele Hammer

Index Scriptorium Estoniae

Vasar, Ants

2007-01-01

Küsimusele, miks olete hakanud ettevõtjana koolitajaks, vastavad ASi Viru Keskus juhatuse liige Ants Vasar, Columbus IT Partner Eesti ASi pertner ja nõukogu esimees Arne Kaasik ja Amserv Grupi finantsdirektor Hele Hammer

Seckel syndrome: A rare case report

Directory of Open Access Journals (Sweden)

Rinky Sisodia

2014-01-01

Full Text Available Seckel syndrome (SS is a rare, autosomal recessive syndrome; characterized by severe intrauterine and postnatal growth retardation, microcephaly, mental retardation, and typical facial appearance with beaklike protrusion of the midface (bird headed. In addition to the characteristic craniofacial dysmorphism and skeletal defects, abnormalities have been described in the cardiovascular, hematopoietic, endocrine, gastrointestinal, and central nervous systems. Usually such patients have poor psychomotor development. This case report presents an 8-year-old child with SS born to parents, exposed in Bhopal gas disaster.

Analysis of water hammer in a penstock in the case of valve closure. Part 2: Pressure losses concentrated downstream

Directory of Open Access Journals (Sweden)

Hocine HAMMOUM

2017-06-01

Full Text Available In our previous study (Part 1; by using the graphic of Bergeron, we have drawn the relationships which allow calculating flows and pressures at the valve and the reservoir, considering that pressure losses are negligible. Now, we assume in this second contribution that these pressure losses are concentrated downstream of the pipe, just at the entry of the valve. The study will focus on water hammer-induced by a slow closing of the valve. A practical example will be presented at the end of this work in order to illustrate the exposed method.

[A case of Isaacs' syndrome associated with dextrocardia].

Science.gov (United States)

Torres, L; Cosentino, C; Vélez, M; Anicama, A

Isaacs syndrome is a disorder of unknown etiology characterized by muscular rigidity, cramps and myokymias. Described by Isaacs in 1961 and called by him as continuous muscular activity syndrome. There are few reports in Latino american countries. A 31 year-old man with sustained muscular contractions in lower limbs and diffuse myokymias since he was eighteen-year old. Dextrocardia was disclosed on clinical examination. We report the case of a patient with Isaacs syndrome and dextrocardia.

Kleine–Levin Syndrome: A case report

Directory of Open Access Journals (Sweden)

Taís Figueiredo de Araújo Lima

2014-06-01

Full Text Available The Kleine–Levin Syndrome is a differential diagnosis for patients with diurnal excessive sleepiness and a suspicion of narcolepsy. It is characterized by paroxysmal attacks of diurnal excessive sleepiness, associated with one or more symptoms of hyperphagia, hypersexuality, coprolalia and copropraxia. During crisis intervals, there are no symptoms. This pathology predominantly manifests itself in teenagers, being more frequent among males. The course of this disease is unpredictable, with variable duration and frequency. The most accepted physiopathology is that of a hypothalamic dysfunction, although and recently, there has appeared a hypothesis of a post-infectious autoimmune disorder. These patients show an elevated body mass index, which can predispose to association with comorbidities such as the sleep obstructive apnea syndrome. Treatment involves medications with different effects, but there is no specific and effective therapy. Our article shows a classic case of Kleine–Levin Syndrome associated with sleep obstructive apnea syndrome, a rare association in the literature.

Impact of industrial hammer mill rotor speed on extraction efficiency and quality of extra virgin olive oil.

Science.gov (United States)

Polari, Juan J; Garcí-Aguirre, David; Olmo-García, Lucía; Carrasco-Pancorbo, Alegría; Wang, Selina C

2018-03-01

Crushing is a key step during olive oil extraction. Among commercial crushers, the hammer mill is the most widely used due to its robustness and high throughput. In the present work, the impact of hammer mill rotor speed on extraction yield and overall quality of super-high-density Arbosana olive oils were assessed in an industrial facility. Our results show that increasing the rotor speed from 2400rpm to 3600rpm led to a rise in oil yield of 1.2%, while conserving quality parameters. Sensory analysis showed more pungency with increased rotation speed, while others attributes were unaffected. Volatile compounds showed little variation with the differences in crusher speed; however, total phenols content, two relevant secoiridoids, and triterpenoids levels increased with rotor speed. Hammer mill rotor speed is a processing variable that can be tuned to increase the extraction efficiency and modulate the chemical composition of extra virgin olive oil. Copyright © 2017 Elsevier Ltd. All rights reserved.

Anisotropy in Alpedrete granite cutting (Rift, Grain and Hardway directions) and effect on bush hammered heritage ashlars

Science.gov (United States)

Freire-Lista, David Martin; Fort, Rafael

2015-04-01

Many monuments and cities that are part of humanity's heritage have been built with carved granite ashlars. This dimension stone is one of the most used due to its abundance and durability. Traditional quarrymen have used anisotropic planes to cut granite blocks in the quarry for improved cutting performance. These planes are called Rift, Grain and Hardway (R, G, H) according to the ease of cutting. The aim of this study is to determine the response of each of the three orthogonal cutting planes R, G and H to the craft styling with bush hammer, based on their decay. Alpedrete granite was selected for this research, it is a monzogranite quarried in the Sierra de Guadarrana (Spanish Central System) foothills, in the province of Madrid, Spain. It is one of the most representative of Madrid's heritage granites. Alpedrete granite is also used as building stone in other European cities. From an Alpedrete granite bush hammered ashlar, three thin sections were cut parallel to the H plane; these thin sections cut R and G bush hammered planes. Also three thin sections have been cut parallel to the R plane at a distance of 2 mm, 10 mm and 30 mm from the bush hammered surface. All thin sections have been treated with fluorescein. In each of the thin sections a micrograph mosaic was performed covering the entire area (about 10 cm2, 300 photomicrographs) and printed with 120 increases. The length and spacing of inter-, intra- and trans-crystalline microcracks were quantified and measured. Microcracks were subdivided based on affected minerals in each R, G and H planes. Through these observations it was found that Alpedrete Granite R plane (easier to cut) is determined by exfoliation microcracks orientation. That is, R plane is parallel to the exfoliations microcracks, which are intra-crystalline and straight. The cutting of stones in the R plane is due to the coalescence of straight microcracks in the plane. This plane minimizes the effort and cost of subsequent carving so it

[Neuropsychiatric symptoms in Sotos syndrome. Case report and review of the literature].

Science.gov (United States)

Kessler, Holger; Kraft, Susanne

2008-01-01

Sotos syndrome, or cerebral gigantism, is a rare genetic syndrome characterized by excessive growth during childhood, macrocephaly, distinctive facial gestalt and learning difficulties. It is caused by mutations or deletions of the NSD-1 gene. Most cases are sporadic. Apart from a number of physical abnormalities that are commonly present, a high prevalence of cognitive, emotional and behavioural problems in children with Sotos syndrome can be assumed. However, there has been almost no literature about psychiatric symptoms in adults with Sotos syndrome so far; one case of psychosis was reported. In the present case, the authors present psychopathological features of an adult patient with Sotos syndrom who developed - among other things - psychotic symptoms.

Avoiding water hammer/fluid transients in nuclear piping systems by controlled filling

International Nuclear Information System (INIS)

1991-01-01

A variety of geometries and operating procedures that lead to steam bubble collapse induced water hammers have been explored experimentally. Construction guidelines that will eliminate the problem at the design stage have been proposed and methods for predicting the pressure signatures proposed

Intrapartum diagnostic of Roberts syndrome - case presentation.

Science.gov (United States)

Socolov, Răzvan Vladimir; Andreescu, Nicoleta Ioana; Haliciu, Ana Maria; Gorduza, Eusebiu Vlad; Dumitrache, Florentin; Balan, Raluca Anca; Puiu, Maria; Dobrescu, Mihaela Amelia; Socolov, Demetra Gabriela

2015-01-01

Roberts syndrome is a rare disease, with multiple limb and skeletal abnormalities (called "pseudothalidomide disease"). There are only around 150 cases described in literature. We present a case of Roberts syndrome, diagnosed in moment of delivery, after a pregnancy without prenatal follow-up. The stillborn baby was naturally delivered by a 17-year-old primiparous woman at 38 weeks of amenorrhea. The pregnancy was not followed due to socioeconomic and family situation, and no prenatal ultrasound was performed. The male baby has 2650 g and presented several morphological abnormalities and tight double umbilical abdominal loop. The macroscopic evaluation showed: dolichocephaly, hypoplastic inferior maxilla with micrognathia, antimongoloid palpebral slant, pterygium colli, abnormal and lower implanted ears, superior limbs phocomelia, syndactyly at lower left limb and tetradactyly in all limbs, bilateral cryptorchidism, pancreatic aplasia. Roberts syndrome is a rare genetic disease with recessive autosomal transmission generated by mutations in ESCO2 gene, located on chromosome 8. The disease should be easy to diagnose by antenatal ultrasound examination, but in our case, the lack of prenatal follow-up determined the diagnostic at term. We believe consider this case is an argument towards introducing ultrasound-screening compulsory to all pregnancies. To identify a possible genetic mutation, further investigations of the parents are in progress, but classically the disease has a recessive autosomal transmission.

Ramsay Hunt syndrome in a child – case report

Directory of Open Access Journals (Sweden)

Joanna Grabowska

2016-12-01

Full Text Available Introduction. Ramsay Hunt syndrome is a rare disease characterized by complications of herpes zoster oticus. This syndrome is defined by characteristic skin lesions with paresis of the facial and/or vestibulocochlear nerve. Objective. To present a case of a 14-year-old child with Ramsay Hunt syndrome. Case report . A 14-year-old patient was admitted to the Department of Dermatology due to vesicular lesions in the left auricular region. On medical examination, insufficiency of the left eyelid, asymmetry of the facial lines, drooping of the left corner of the mouth, and smoothing of the forehead were observed. According to the House-Brackmann scale, the patient had paresis (grade IV of the facial nerve. The patient was treated with intravenous acyclovir, antibiotics and anti-inflammatory drugs. Supplementation with vitamin B and rehabilitation procedures were also introduced. Conclusions . Ramsay Hunt syndrome is very rare in the pediatric population. It requires interdisciplinary cooperation between doctors. The presented case confirms the validity of therapy with acyclovir and prednisone and rehabilitation.

Anton's syndrome due to cerebrovascular disease: a case report

Directory of Open Access Journals (Sweden)

Maddula Mohana

2009-09-01

Full Text Available Abstract Introduction Anton's syndrome describes the condition in which patients deny their blindness despite objective evidence of visual loss, and moreover confabulate to support their stance. It is a rare extension of cortical blindness in which, in addition to the injury to the occipital cortex, other cortical centres are also affected, with patients typically behaving as if they were sighted. Case presentation We present a case report of an 83-year-old white woman with cortical blindness as a result of bilateral occipital lobe infarcts. Despite her obvious blindness, illustrated by her walking into objects, the patient expressed denial of visual loss and demonstrated confabulation in her accounts of her surroundings, consistent with a diagnosis of Anton's syndrome. Conclusions A suspicion of cortical blindness and Anton's syndrome should be considered in patients with atypical visual loss and evidence of occipital lobe injury. Cerebrovascular disease is the most common cause of Anton's syndrome, as in our patient. However, any condition that may result in cortical blindness can potentially lead to Anton's syndrome. Recovery of visual function will depend on the underlying aetiology, with cases due to occipital lobe infarction after cerebrovascular events being less likely to result in complete recovery. Management in these circumstances should accordingly focus on secondary prevention and rehabilitation.

A Case of Paraneoplastic Cushing Syndrome Presenting as Hyperglycemic Hyperosmolar Nonketotic Syndrome

Directory of Open Access Journals (Sweden)

Christina E. Brzezniak

2017-04-01

Full Text Available Carcinoid tumors are neuroendocrine tumors that mainly arise in the gastrointestinal tract, lungs, and bronchi. Bronchopulmonary carcinoids have been associated with Cushing syndrome, which results from ectopic adrenocorticotrophic hormone (ACTH secretion. We report the case of a 65-year-old man, a colonel in the US Air Force, with metastatic bronchopulmonary carcinoid tumors treated on a clinical trial who was hospitalized for complaints of increasing thirst, polydipsia, polyuria, weakness, and visual changes. Decompensated hyperglycemia suggested a diagnosis of hyperglycemic hyperosmolar nonketotic syndrome (HHNS. Additional findings, which included hypokalemia, hypernatremia, hypertension, metabolic alkalosis, moon facies, and striae, raised a red flag for an ectopic ACTH syndrome. Elevated ACTH levels confirmed Cushing syndrome. Treatment with a fluid replacement and insulin drip resulted in immediate symptomatic improvement. Cushing syndrome should be considered in carcinoid patients with physical stigmata such as moon facies and striae. HHNS may be the presenting clinical feature in patients with impaired glucose metabolism.

A case of phace syndrome and acquired hypopituitarism?

Directory of Open Access Journals (Sweden)

Denzer Friederike

2012-06-01

Full Text Available Abstract Background PHACE is a neurocutaneous syndrome associated with: Posterior fossa brain malformations, large “segmental” facial hemangiomas, arterial cerebrovascular-, cardiovascular-, and eye anomalies. Case vignette We are reporting a girl with PHACE syndrome. The patient had a congenital right-sided facial hemangioma with plaque-morphology. At age 11 years and 2 months she presented with short stature, markedly decreased growth velocity and signs and symptoms suggestive of hypothyroidism. Magnetic Resonance Imaging (MRI of the brain revealed complex structural and cerebrovascular arterial anomalies, including an empty sella. Testing of pituitary function revealed multiple pituitary dysfunctions, including absolute growth hormone deficiency, hypogonadotropic hypogonadism, central hypothyroidism, and secondary adrenal insufficiency. Conclusions This case suggests the necessity to screen all patients with PHACE syndrome and intracranial malformations for pituitary dysfunction at regular intervals.

Staphylococcal scalded skin syndrome in a 4-year-old child: a case report.

Science.gov (United States)

Haasnoot, P J; De Vries, A

2018-01-29

Staphylococcal scalded skin syndrome is an exfoliating skin disease which primarily affects children. Differential diagnosis includes toxic epidermal necrolysis, staphylococcal scalded skin syndrome, epidermolysis bullosa, and Stevens-Johnson syndrome. Staphylococcal scalded skin syndrome primarily affects children and can cause serious morbidity. In this case report we highlight the case of a 4-year-old Caucasian boy. Diagnostic and therapeutic challenges are discussed. Differential diagnoses are considered and therapy is described and discussed. The latest treatment options are used and described. Successful results are achieved in this case due to timely and correct management. Some therapeutic options are widely used without thorough research bases. This case report highlights staphylococcal scalded skin syndrome and its treatment, and future challenges. Further research is warranted and this case report aims to further research in exfoliating skin disorders.

Meckel-Gruber syndrome: Report of two cases

Directory of Open Access Journals (Sweden)

C Panduranga

2012-01-01

Full Text Available Meckel-Gruber syndrome (MKS is an autosomal recessive disorder, characterized by a combination of renal cysts and variably associated with features including developmental anomalies of the central nervous system (typically encephalocele, hepatic ductal dysplasia, cysts, and polydactyly. It is a rare syndrome with highest incidence in Gujarati Indians and Finnish population. We report two such cases of MKS in non-Gujarati Indian which were diagnosed by neonatal autopsy.

Usher Syndrome: Case Reports of Two Siblings

OpenAIRE

Raman Prasad Sah, B.Optom; Pragati Gautam, MD; Jyoti Baba Shrestha, MD; Mahesh Raj Joshi, M.Optom

2015-01-01

Background: Usher syndrome is a rare autosomal recessive disorder characterized by congenital sensory neural deafness and progressive visual loss secondary to retinitis pigmentosa. There are three different types of Usher syndrome. Retinitis pigmentosa is the main ophthalmic manifestation shared by all three. Differences in auditory and vestibular function are the distinguishing feature. Case Reports: Two brothers, 13 and 16 years of age, presented with chief complaints of progressive dim...

Persistent Mullerian Duct Syndrome: an interesting case report.

Science.gov (United States)

Farag, S; Sutton, P; Leow, K S; Kosai, N R; Razman, J; Hanafiah, H; Das, S

2013-01-01

Transverse testicular ectopia is an uncommon disorder of testicular ectopia. Nearly thirty percent of the cases is associated with Persistent mullerian duct syndrome which is characterized by karyotypically normal males with retained mullerian derivatives. Understanding the natural process of the condition and the association with malignant potential will allow for a better understanding of the optimal surgical approach. This is a case report of young male presented a left sided inguinal hernia in which the sac contained both testes and uterus. The literature review of the syndrome will be discussed.

An Overlap Syndrome of Pigment Dispersion and Pigmentary Glaucoma accompanied by Marfan Syndrome: Case Report with Literature Review.

Science.gov (United States)

Chakravarti, Tutul; Spaeth, George

2013-01-01

'Overlap syndrome' describes the situation in which two or more 'independent' conditions are present, either one of which could cause a particular finding. This current presentation reports a case with bilateral pigment dispersion syndrome (PDS), advanced pigmentary glaucoma (PG), and the Marfan syndrome, with bilateral subluxation of the lenses, and large short-term and long-term fluctuations of intraocular pressure. It is interesting to consider whether the associated advanced glaucomatous nerve damage could be a manifestation of just the PDS, just the Marfan syndrome, or rather a combination of these two overlapping independent conditions. How to cite this article: Chakravarti T, George S. An Overlap Syndrome of Pigment Dispersion and Pigmentary Glaucoma accompanied by Marfan Syndrome: Case Report with Literature Review. J Current Glau Prac 2013;7(2):91-95.

If I Had a Hammer: Technology in the Language Arts Classroom.

Science.gov (United States)

Jester, Richard

2002-01-01

Describes the computer as a hammer, a tool with unique qualities that allows people to perceive, manipulate, and express language in ways quite different from traditional media. Explores the tool of the multimedia presentation, a common use of technology in classrooms today. Describes a simple project with sixth graders that incorporates reading,…

Bilateral inverse Duane′s retraction syndrome-A case report

Directory of Open Access Journals (Sweden)

Chatterjee Pranab

1991-01-01

Full Text Available Duane′s retraction syndrome is a well known congenital musculo-facial anomaly. Various explanations have been given for the aetiology of this syndrome. Inverse Duane′s retraction syndrome is a condition with reverse clinical features. Abduction of the affected eye is possible to some extent and is accompanied by retraction of the eyeball, narrowing of the palpebral fissure and pseudoptosis. There may be some restriction of movement on adduction. The primary lesion is suspected to be in the medial rectus muscle. Frequently the muscle is found to be entrapped following trauma to the medial wall of the orbit. A case of bilateral inverse Duane′s retraction syndrome and convergent squint along with left-sided perceptive deafness is reported. As is usually the case there was no structural abnormality or entrapment of the muscle from trauma.

Peutz-Jehgers syndrome (A case report)

International Nuclear Information System (INIS)

Kim, Byoung Geun; Park, Heung Il; Kwun, Chung Sik

1974-01-01

This is a report of rare case of Peutz-Jehgers syndrome in a 13 years old boys with chief complaints of melena and intermittent abdominal pain since 3 years of age. He has multiple small melanin pigmentations in the face, lower lip, and left buccal mucosa and numerous small and large polyps in the stomach, jejunum, ileum, colon, and rectum by roentgenologic studies. Hereditary features, mucocutaneous pigmentations, clinical manifestations, pathologic features, roentgen features, and differential diagnosis, and treatment of Peutz-Jehgers syndrome are discussed with a review of the literature

Peutz-Jehgers syndrome (A case report)

Energy Technology Data Exchange (ETDEWEB)

Kim, Byoung Geun; Park, Heung Il; Kwun, Chung Sik [Chonnam University School of Medicine, Kwangju (Korea, Republic of)

1974-10-15

This is a report of rare case of Peutz-Jehgers syndrome in a 13 years old boys with chief complaints of melena and intermittent abdominal pain since 3 years of age. He has multiple small melanin pigmentations in the face, lower lip, and left buccal mucosa and numerous small and large polyps in the stomach, jejunum, ileum, colon, and rectum by roentgenologic studies. Hereditary features, mucocutaneous pigmentations, clinical manifestations, pathologic features, roentgen features, and differential diagnosis, and treatment of Peutz-Jehgers syndrome are discussed with a review of the literature.

A case report of Halzon syndrome

Directory of Open Access Journals (Sweden)

Montazeri A

1997-07-01

Full Text Available Report of two cases from Halzon syndrome (Tabriz-1996-97. One mother and her daughter ten minutes after eating from raw or half-ripe sheep gut (bowel, showed clinical demonstration of Halzon syndrome. Clinical aspects included: nasal, ear, frontal, and throat pruritis; oral and nasal discharge, caugh, headache, vertigo and mucoid sputum. One day after beginning of this signs and symptoms, some small white worms in 4-6 mm size, discharge from nose and mouth of patients. These worms in laboratory study, were diagnosed as nymph of linguatula serrata

A case of Swyer-James syndrome