WorldWideScience

Sample records for hameurlain rosine cicchetti

  1. 21 CFR 178.3870 - Rosins and rosin derivatives.

    Science.gov (United States)

    2010-04-01

    ... color grade of K or paler. (ii) Wood rosin, refined to color grade of K or paler. (iii) Tall oil rosin, refined to color grade of K or paler. (iv) Dark tall oil rosin, a fraction resulting from the refining of tall oil rosin produced by multicolumnar distillation of crude tall oil to effect removal of fatty...

  2. 7 CFR 160.14 - Opaque rosin.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... resulting when rosin undergoes internal modification indicated by a turbid, clouded, or opaque appearance...

  3. "You got to love rosin: Solventless dabs, pure, clean, natural medicine." Exploring Twitter data on emerging trends in Rosin Tech marijuana concentrates.

    Science.gov (United States)

    Lamy, Francois R; Daniulaityte, Raminta; Zatreh, Mussah; Nahhas, Ramzi W; Sheth, Amit; Martins, Silvia S; Boyer, Edward W; Carlson, Robert G

    2018-02-01

    "Rosin tech" is an emerging solventless method consisting in applying moderate heat and constant pressure on marijuana flowers to prepare marijuana concentrates referred to as "rosin." This paper explores rosin concentrate-related Twitter data to describe tweet content and analyze differences in rosin-related tweeting across states with varying cannabis legal statuses. English language tweets were collected between March 15, 2015 and April 17, 2017, using Twitter API. U.S. geolocated unique (no retweets) tweets were manually coded to evaluate the content of rosin-related tweets. Adjusted proportions of Twitter users and personal communication tweets per state related to rosin concentrates were calculated. A permutation test was used to analyze differences in normalized proportions between U.S. states with different cannabis legal statuses. eDrugTrends collected 8389 tweets mentioning rosin concentrates/technique. 4164 tweets (49.6% of total sample) posted by 1264 unique users had identifiable state-level geolocation. Content analysis of 2010 non-retweeted tweets revealed a high proportion of media-related tweets (44.2%) promoting rosin as a safer and solventless production method. Tweet-volume-adjusted percentages of geolocated Twitter users and personal communication tweets about rosin were respectively up to seven and sixteen times higher between states allowing recreational use of cannabis and states where cannabis is illegal. Our results indicate that there are higher proportions of personal communication tweets and Twitter users tweeting about rosin in U.S. states where cannabis is legalized. Rosin concentrates are advertised as a safer, more natural form of concentrates, but more research on this emerging form of marijuana concentrate is needed. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. Green material composites from renewable resources: Polymorphic transitions and phase diagram of beeswax/rosin resin

    Energy Technology Data Exchange (ETDEWEB)

    Gaillard, Yves [Mines-ParisTech., CEMEF, UMR CNRS 7635, 1 rue Claude Daunesse 06904 Sophia Antipolis cedex (France); Mija, Alice [University of Nice-Sophia Antipolis, Thermokinetic Group, Laboratory of Chemistry of Organic and Metallic Materials C.M.O.M., 06108 Nice Cedex 2 (France); Burr, Alain; Darque-Ceretti, Evelyne; Felder, Eric [Mines-ParisTech., CEMEF, UMR CNRS 7635, 1 rue Claude Daunesse 06904 Sophia Antipolis cedex (France); Sbirrazzuoli, Nicolas, E-mail: sbirrazz@unice.fr [University of Nice-Sophia Antipolis, Thermokinetic Group, Laboratory of Chemistry of Organic and Metallic Materials C.M.O.M., 06108 Nice Cedex 2 (France)

    2011-07-10

    Highlights: {yields} Blends of Rosin and beeswax are studied by DSC, XRD, and optical microscopy. {yields} The first phase diagram beeswax/rosin is established. {yields} Polymorphic transitions are identified and appear to be highly related to rosin content. - Abstract: Rosin and beeswax are two complex natural materials presenting numerous applications in paints, adhesives, varnishes or inks. Melted, they are particularly interesting for their adhesion properties. This paper establishes the first phase diagram beeswax/rosin blends. A systematic approach using X-ray diffraction (XRD), differential scanning calorimetry (DSC) and polarised optical microscopy (POM) has been performed in order to describe the crystallographic structure and the thermal properties of two materials, beeswax and rosin, and their blends. Indeed, melting, softening and crystallisation temperatures, polymorphic transitions but also crystalline index has been investigated. The resulting phase diagram reveals a complex behaviour in terms of phase transformation and time-dependent phenomenon mainly representative of the complex composition of beeswax.

  5. Renewable Pentablock Copolymers Containing Bulky Natural Rosin for Tough Bioplastics

    Science.gov (United States)

    Rahman, Md Anisur; Ganewatta, Mitra S.; Lokupitiya, Hasala N.; Liang, Yuan; Stefik, Morgan; Tang, Chuanbing

    Renewable polymers have received significant attention due to environmental concerns on petrochemical counterparts. One of the most abundant natural biomass is resin acids. However, most polymers derived from resin acids are low molecular weight and brittle because of the high chain entanglement molecular weight resulted from the bulky hydrophenanthrene pendant group. It is well established that the brittleness can be overcome by synthesizing multi-block copolymers with low entanglement molecular weight components. We investigated the effects of chain architecture and microdomain orientation on mechanical properties of both tri and pentablock copolymers. We synthesized rosin-containing A-B-A-B-A type pentablock and A-B-A type triblock copolymers to improve their mechanical properties. Pentablock copolymers showed higher strength and better toughness as compared to triblock copolymers, both superior to homopolymers. The greater toughness of pentablock copolymers is due to the presence of the rosin based midblock chains that act as bridging chains between two polynorbornene blocks.

  6. Reaction rate estimation of controlled-release antifouling paint binders: Rosin-based systems

    DEFF Research Database (Denmark)

    Meseguer Yebra, Diego; Kiil, Søren; Dam-Johansen, Kim

    2005-01-01

    Biofouling on ship hulls is prevented by the use of antifouling (A/F) paints. Typically, sea water soluble rosin or rosin-derivatives are used as the primary means of adjusting the polishing rate of the current chemically active self-polishing paint systems to a suitable value. Previous studies h...

  7. CHEMICAL COMPOSITIONS OF PINE RESIN, ROSIN AND TURPENTINE OIL FROM WEST JAVA

    Directory of Open Access Journals (Sweden)

    Bambang Wiyono

    2006-03-01

    Full Text Available This study was conducted to identify chemical composition of merkus pine resin, rosin and turpentine oil. Initially, pine resin was separated into neutral and acidic fractions with an aqueous 4% sodium hydroxide solution. After methylation, the fraction containing turpentine oil and rosin were analyzed by gas chromatography (GC, and gas chromatograph mass spectrometry (GC-MS, respectively. The neutral fraction of pine resin and turpentine oil mainly consisted of a-pinene, D-3-carene and b-pinene. Based on mass spectral comparison, the major constituents of the acidic fraction and rosin were identified as sandaracopimaric acid, isopimaric acid, palustric acid, dehydroabietic acid, abietic acid, neoabietic acid, and merkusic acid. The major component of the acidic fractions was palustric acid, while that of rosin was abietic acid. Using TC (tough column 1 and TC 5 columns, levopimaric acid could not be separated from rosin or acidic fraction of pine resin of Indonesian Pinus merkusii.

  8. Interaction of biocompatible natural rosin-based surfactants with human serum albumin: A biophysical study

    International Nuclear Information System (INIS)

    Ishtikhar, Mohd; Ali, Mohd Sajid; Atta, Ayman M.; Al-Lohedan, H.A.; Nigam, Lokesh; Subbarao, Naidu; Hasan Khan, Rizwan

    2015-01-01

    Biophysical insight into interaction of biocompatible rosin-based surfactants with human serum albumin (HSA) was studied at physiological conditions using various spectroscopic, calorimetric and molecular docking approaches. The binding constant (K b ), enthalpy (ΔH 0 ), entropy (ΔS 0 ) and Gibbs free energy change (ΔG 0 ) were calculated by spectroscopic and calorimetric method. We have also calculated the probability of energy transfer by FRET analysis. The circular dichroism study showed that the cationic surfactant QRMAE significantly altered the secondary structure of HSA as compared to the nonionic rosin surfactants. The thermodynamic study was performed by ITC to determine binding constant as well as change in enthalpy of HSA in presence of rosin surfactants. It clearly showed that hydrogen binding and hydrophobic interaction play an important role in the binding of HSA to rosin surfactants. We have also performed molecular docking studies to locate the binding site on HSA and to visualize the mode of interaction. The present study provides a significant insight into HSA–rosin surfactants interaction, which also improves our understanding of the possible effect of rosin surfactants on human health. - Highlights: • RMPEG 750 has the highest Kb, Kq and Ksv value as compared to other rosin surfactants. • The probability of energy transfer from HSA to rosin surfactants was maximum in the case of RMPEG 750. • Cationic surfactant QRMAE significantly altered the secondary structure of the HSA as compared to other rosin surfactants. • Molecular docking and ITC experiment studies, to locate the binding site on HSA and to investigate the mode of interaction

  9. Interaction of biocompatible natural rosin-based surfactants with human serum albumin: A biophysical study

    Energy Technology Data Exchange (ETDEWEB)

    Ishtikhar, Mohd [Protein Biophysics Laboratory, Interdisciplinary Biotechnology Unit, Aligarh Muslim University, Aligarh 202002 (India); Ali, Mohd Sajid [Surfactant Research Chair, Department of Chemistry, King Saud University, P.O. Box-2455, Riyadh 11451 (Saudi Arabia); Atta, Ayman M. [Surfactant Research Chair, Department of Chemistry, King Saud University, P.O. Box-2455, Riyadh 11451 (Saudi Arabia); Petroleum Application department, Egyptian Petroleum Research Institute, Ahmad Elzomor St., Nasr city, Cairo-11727 (Egypt); Al-Lohedan, H.A. [Surfactant Research Chair, Department of Chemistry, King Saud University, P.O. Box-2455, Riyadh 11451 (Saudi Arabia); Nigam, Lokesh; Subbarao, Naidu [Centre for Computational Biology and Bioinformatics, School of Computational and Integrative Sciences, Jawaharlal Nehru University, New Delhi 110067 (India); Hasan Khan, Rizwan, E-mail: rizwanhkhan@hotmail.com [Protein Biophysics Laboratory, Interdisciplinary Biotechnology Unit, Aligarh Muslim University, Aligarh 202002 (India)

    2015-11-15

    Biophysical insight into interaction of biocompatible rosin-based surfactants with human serum albumin (HSA) was studied at physiological conditions using various spectroscopic, calorimetric and molecular docking approaches. The binding constant (K{sub b}), enthalpy (ΔH{sup 0}), entropy (ΔS{sup 0}) and Gibbs free energy change (ΔG{sup 0}) were calculated by spectroscopic and calorimetric method. We have also calculated the probability of energy transfer by FRET analysis. The circular dichroism study showed that the cationic surfactant QRMAE significantly altered the secondary structure of HSA as compared to the nonionic rosin surfactants. The thermodynamic study was performed by ITC to determine binding constant as well as change in enthalpy of HSA in presence of rosin surfactants. It clearly showed that hydrogen binding and hydrophobic interaction play an important role in the binding of HSA to rosin surfactants. We have also performed molecular docking studies to locate the binding site on HSA and to visualize the mode of interaction. The present study provides a significant insight into HSA–rosin surfactants interaction, which also improves our understanding of the possible effect of rosin surfactants on human health. - Highlights: • RMPEG 750 has the highest Kb, Kq and Ksv value as compared to other rosin surfactants. • The probability of energy transfer from HSA to rosin surfactants was maximum in the case of RMPEG 750. • Cationic surfactant QRMAE significantly altered the secondary structure of the HSA as compared to other rosin surfactants. • Molecular docking and ITC experiment studies, to locate the binding site on HSA and to investigate the mode of interaction.

  10. CHEMICAL COMPOSITIONS OF PINE RESIN, ROSIN AND TURPENTINE OIL FROM WEST JAVA

    OpenAIRE

    Wiyono Bambang; Tachibana Sanro; Djaban Tinambunan

    2006-01-01

    This study was conducted to identify chemical composition of merkus pine resin, rosin and turpentine oil. Initially, pine resin was separated into neutral and acidic fractions with an aqueous 4% sodium hydroxide solution. After methylation, the fraction containing turpentine oil and rosin were analyzed by gas chromatography (GC), and gas chromatograph mass spectrometry (GC-MS), respectively. The neutral fraction of pine resin and turpentine oil mainly consisted of a-pinene, D-3-carene and b-p...

  11. Development and characterization of rosin-based polymer and its application as a cream base.

    Science.gov (United States)

    Dhanorkar, V T; Gawande, R S; Gogte, B B; Dorle, A K

    2002-01-01

    The literature contains many references to the wide range of uses of rosin-based polymers, but little has appeared in the area of rosin-based polymers used as cream bases. Various rosin polymers based on glycerol, sorbitol, and pentaerythritol were prepared and screened for efficacy as cream bases. Among these polymers, polymer 2 (glycerol-based) is reported in the present study as it produced creams with a better stability and release profile as compared to other creams. The creams were formulated employing polymer 2 (P2) and Tween 60 as surfactants. The stability of the prepared creams, as well as the diclofenac diethylammonium release pattern, was investigated using particle size analysis, conductivity, relative dielectric constant, spreadability, and irritation potential measurement, and was compared with that of creams containing Tween 60 (RT) prepared in the laboratory. The release of the drug, diclofenac diethylammonium, was measured after eight hours and compared with a standard cream (RT) and a marketed cream (RM).

  12. Facile pyrolysis preparation of rosin-derived biochar for supporting silver nanoparticles with antibacterial activity

    DEFF Research Database (Denmark)

    Huang, Jian Fei; Shi, Qing Shan; Feng, Jin

    2017-01-01

    -step preparation process and a low loading capacity of nanoparticles. A facile preparation route for the preparation of antibacterial metallic nanocomposites would be especially beneficial for industrial fabrication. In this study, we provided a facile strategy for the preparation of a rosin-derived biochar matrix...... loaded with silver nanoparticles (Ag NPs) as the fillers. The results demonstrated that the preparation of these rosin-derived biochar silver nanocomposites (Rc/Ag nanocomposites) was achieved by a rapid pyrolysis process and a large amount of Ag NPs were in-situ obtained and homogeneously dispersed...

  13. 7 CFR 160.88 - Permitted use of words “turpentine” and “rosin.”

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Permitted use of words âturpentineâ and ârosin.â 160... STORES REGULATIONS AND STANDARDS FOR NAVAL STORES Sales and Shipments § 160.88 Permitted use of words “turpentine” and “rosin.” The use of the word “turpentine” or the word “rosin” is not prohibited in the name...

  14. The Potential of Sumatran Pine Rosin for Reinforcement-Steel Coating in Wet Environment

    Directory of Open Access Journals (Sweden)

    Rudi Hartono

    2018-01-01

    Full Text Available The corrosion of reinforcement-steel is commonly prevented by applying hydrophobic coating. In this work, the potential of residual product from Sumatran Pine sap distillation, known as Sumatran pine rosin or gondorukem, as a natural and environmentally-friendy resource to coat reinforcement-steel, and an initial assessment on its capability to prevent the corrosion in wet environment were investigated. The experiments were performed using two types of commercially available gondorukem, namely type T and U. The coated reinforcement-steel samples were immersed in collected rainwater and their physical changes were observed periodically for 60 days. The results showed that gondorukem improve the durability of the reinforcement-steel from corrosion in a severe rainwater contact. Keywords:  corrosion, coating, gondorukem, hydrophobic, pine rosin, reinforcement bar

  15. Biotechnological approaches to enhance salidroside, rosin and its derivatives production in selected Rhodiola spp. in vitro cultures.

    Science.gov (United States)

    Grech-Baran, Marta; Sykłowska-Baranek, Katarzyna; Pietrosiuk, Agnieszka

    Rhodiola (Crassulaceae) an arctic-alpine plant, is extensively used in traditional folk medicine in Asian and European countries. A number of investigations have demonstrated that Rhodiola preparations exhibit adaptogenic, neuroprotective, anti-tumour, cardioprotective, and anti-depressant effects. The main compounds responsible for these activities are believed to be salidroside, rosin and its derivatives which became the target of biotechnological investigations. This review summarizes the results of the diverse biotechnological approaches undertaken to enhance the production of salidroside, rosin and its derivatives in callus, cell suspension and organ in vitro cultures of selected Rhodiola species.

  16. PLA/PBAT Bionanocomposites with Antimicrobial Natural Rosin for Green Packaging.

    Science.gov (United States)

    Moustafa, Hesham; El Kissi, Nadia; Abou-Kandil, Ahmed I; Abdel-Aziz, Mohamed S; Dufresne, Alain

    2017-06-14

    The use of biodegradable polymers is of great importance nowadays in many applications. Some of the most commonly used biopolymers are polylactic acid (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) due to their superior properties and availability. In this manuscript, we use a facile and green modification method of organoclay (OC) by antimicrobial natural rosin which is considered as a toxicity-free reinforcing material, thus keeping the green character of the material. It increases the interlayer spacing between the clay platelets. This was proven by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) and found to impart antimicrobial properties to PLA/PBAT blends. The morphology of the resulting blends was conducted using scanning and transmission electron microscopies (SEM and TEM), and evidence of exfoliation and intercalation was observed. The thermal properties of the blends were studied using differential scanning calorimetry (DSC), and a detailed study of the crystallization of both PLA and PBAT was reported showing cold crystallization behavior of PLA. The final effect on mechanical and antimicrobial properties was also investigated. The obtained results reveal excellent possibility of using expanded OC modified PLA/PBAT polymer blends by adding a green material, antimicrobial natural rosin, for food packaging and biomembranes applications.

  17. Combination of microsized mineral particles and rosin as a basis for converting cellulosic fibers into "sticky" superhydrophobic paper.

    Science.gov (United States)

    Yu, Xiaoyan; Bian, Peiwen; Xue, Yang; Qian, Xueren; Yu, Haipeng; Chen, Wenshuai; Hu, Xiaohai; Wang, Peng; Wu, Dong; Duan, Qinghui; Li, Limei; Shen, Jing; Ni, Yonghao

    2017-10-15

    The unique features of cellulosic paper including flexibility, biodegradability, and low cost enables it as a versatile, sustainable biomaterial for promising applications. In the paper industry, microsized mineral particles are widely used in the production of printing/writing paper grades, while rosin derived from trees is the earliest internal sizing agent for paper hydrophobication. On the basis of existing commercial practices associated with the use of mineral particles and rosin in paper production, we present a process concept of converting cellulosic fibers (paper-grade pulp) into "sticky" superhydrophobic paper involving the use of microsized mineral particles and rosin (a tree-derived natural product, mainly a mixture of resin acids, especially abietic acid with chemical formula of C 19 H 29 COOH). Internal filling of cellulosic networks with mineral particles was basically used to hold out the mineral particles added at the surface, and the delicate integration of wet-end/surface applications of mineral particles with paper surface engineering with rosin/alum led to the development of "sticky" superhydrophobicity, i.e., ultrahigh water-repellency and strong adhesion to water. This proposed concept may provide valuable implications for expanding the use of paper-based products to unconventional applications, e.g., ultrahigh-performance ink jet printing paper for mitigating the "coffee-ring effect" and paper-based microfluidic devices for biomedical testing. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Evaluation of Rosin Gum and Eudragit® RS PO as a Functional Film Coating Material.

    Science.gov (United States)

    Pomin, Suélen Plaza; de Lima, Isabela Angeli; Pezarini, Rogério Ribeiro; Cavalcanti, Osvaldo Albuquerque

    2017-11-01

    Polymers are essential tools in the research and development of new therapeutic devices. The diversity and flexibility of these materials have generated high expectations in the composition of new materials with extraordinary abilities, especially in the design of new systems for the modified release of pharmaceutically active ingredients. The natural polymer rosin features moisture protection and pH-dependent behavior (i.e., it is sensitive to pH > 7.0), suggesting its possible use in pharmaceutical systems. The synthetic polymer Eudragit® RS PO is a low-permeability material, the disintegration of which depends on the time of residence in the gastrointestinal tract. The present study developed a polymeric material with desirable physicochemical characteristics and synergistic effects that resulted from the inherent properties of the associated polymers. Isolated films were obtained by solvent evaporation and subjected to a water vapor transmission test, scanning electron microscopy, calorimetry, Fourier transform-infrared (FT-IR) spectroscopy, micro-Raman spectroscopy, and mechanical analysis. The new polymeric material was macroscopically continuous and homogeneous, was appropriately flexible, had low water permeability, was vulnerable in alkaline environments, and was thermally stable, maintaining an unchanged structure up to temperatures of ∼400°C. The new material also presented potentially suitable characteristics for application in film coatings for oral solids, suggesting that it is capable of carrying therapeutic substances to distal regions of the gastrointestinal tract. These findings indicate that this new material may be added to the list of functional excipients.

  19. Blends of low molecular weight of poly lactic acid (PLA) with gondorukem (gum rosin)

    Science.gov (United States)

    Kaavessina, Mujtahid; Distantina, Sperisa; Chafidz, Achmad; Utama, Aditya; Anggraeni, Venisa Mega Puteri

    2018-02-01

    The utilization of plastic was increasing as well as the increasing its demand in wide range application. Consequently, the number of plastic litter will increase and make more serious environmental problems. This research concerns to minimize waste problems by designing biodegradable plastic. In this research, biodegradable plastic was made of poly lactic acid (PLA) and gondorukem (Gum rosin, Resina colophonium) as the plasticizer. The effect of gondorukem towards PLA properties such as rheology and degradability was investigated. The research divided into two steps: (i) the polycondensation of lactic acid (LA) and (ii) modification of obtained poly lactic acid. In the first step, polycondensation was done in N2 atmosphere (138°C) for 30 hours and added 0.1 %w of SnCl2 as catalyst. Bulk modification was conducted by blending of gondurukem in varied weight (0.5, 1, and 2 g in 10 g of PLA). Furthermore, the modified PLA was analyzed its molecular structure, biodegradability and rheological property. The presence of gondorukem enhanced the biodegradability of poly lactic acid. Gondorukem could act as the plasticizer. It is confirmed that the complex viscosity of PLA melt decreased upon the addition of gondorukem

  20. Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester].

    Science.gov (United States)

    Duan, Wengui; Chen, Chunhong; Jiang, Linbin; Li, Guang Hua

    2008-09-05

    Graft copolymerization of rosin-(2-acryloyloxy)ethyl ester (RAEE) onto chitosan (Cts) was carried out under microwave irradiation using potassium persulfate as an initiator. The structures, morphology, and thermal properties of the Cts graft copolymer (Cts-g-PRAEE) were characterized by means of FT-IR, XRD, SEM, and TG. Also, Cts and Cts-g-PRAEE copolymer were used as carriers of fenoprofen calcium (FC), and their controlled release behavior in artificial intestinal juice were studied. The results show that the rate of release of fenoprofen calcium from the carrier of Cts-g-PRAEE copolymer becomes very slower than that of Cts in artificial intestinal juice. Copyright © 2008. Published by Elsevier Ltd.

  1. Äppideteemaline vestlusring: lapsed ei lähe enam iga hullusega kaasa / Kristjan Port, Kristi Mäe, Kristi Rahn, Jakob Rosin ; intervjueerinud Madis Aesma

    Index Scriptorium Estoniae

    2016-01-01

    Käib konkurss "Eesti parim mobiilirakendus 2016". Vestlusringis äppidest rääkimas inimesed, kelle jaoks rakendused mängivad igapäevaelus erinevaid rolle - spordibioloog, SA Eesti Antidoping nõukogu liige Kristjan Port, politsei- ja piirivalveameti juhtivkriminaalametnik Kristi Mäe, Gustav Adolfi gümnaasiumi klassiõpetaja Kristi Rahn ja Eesti pimedate liidu juhatuse liige, vaegnägija Jakob Rosin

  2. Synthesis of environmentally friendly highly dispersed magnetite nanoparticles based on rosin cationic surfactants as thin film coatings of steel.

    Science.gov (United States)

    Atta, Ayman M; El-Mahdy, Gamal A; Al-Lohedan, Hamad A; Al-Hussain, Sami A

    2014-04-22

    This work presents a new method to prepare monodisperse magnetite nanoparticles capping with new cationic surfactants based on rosin. Core/shell type magnetite nanoparticles were synthesized using bis-N-(3-levopimaric maleic acid adduct-2-hydroxy) propyl-triethyl ammonium chloride (LPMQA) as capping agent. Fourier transform infrared spectroscopy (FTIR) was employed to characterize the nanoparticles chemical structure. Transmittance electron microscopies (TEM) and X-ray powder diffraction (XRD) were used to examine the morphology of the modified magnetite nanoparticles. The magnetite dispersed aqueous acid solution was evaluated as an effective anticorrosion behavior of a hydrophobic surface on steel. The inhibition effect of magnetite nanoparticles on steel corrosion in 1 M HCl solution was investigated using potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Results obtained from both potentiodynamic polarisation and EIS measurements reveal that the magnetite nanoparticle is an effective inhibitor for the corrosion of steel in 1.0 M HCl solution. Polarization data show that magnetite nanoparticles behave as a mixed type inhibitor. The inhibition efficiencies obtained from potentiodynamic polarization and EIS methods are in good agreement.

  3. Synthesis of Environmentally Friendly Highly Dispersed Magnetite Nanoparticles Based on Rosin Cationic Surfactants as Thin Film Coatings of Steel

    Directory of Open Access Journals (Sweden)

    Ayman M. Atta

    2014-04-01

    Full Text Available This work presents a new method to prepare monodisperse magnetite nanoparticles capping with new cationic surfactants based on rosin. Core/shell type magnetite nanoparticles were synthesized using bis-N-(3-levopimaric maleic acid adduct-2-hydroxy propyl-triethyl ammonium chloride (LPMQA as capping agent. Fourier transform infrared spectroscopy (FTIR was employed to characterize the nanoparticles chemical structure. Transmittance electron microscopies (TEM and X-ray powder diffraction (XRD were used to examine the morphology of the modified magnetite nanoparticles. The magnetite dispersed aqueous acid solution was evaluated as an effective anticorrosion behavior of a hydrophobic surface on steel. The inhibition effect of magnetite nanoparticles on steel corrosion in 1 M HCl solution was investigated using potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS. Results obtained from both potentiodynamic polarisation and EIS measurements reveal that the magnetite nanoparticle is an effective inhibitor for the corrosion of steel in 1.0 M HCl solution. Polarization data show that magnetite nanoparticles behave as a mixed type inhibitor. The inhibition efficiencies obtained from potentiodynamic polarization and EIS methods are in good agreement.

  4. Influence of different kinds of rosins and hydrogenated resins on the setting time of Grossman cements Influência de diferentes tipos de breus e resinas hidrogenadas sobre o tempo de endurecimento dos cimentos do tipo Grossman

    Directory of Open Access Journals (Sweden)

    Manoel Damião SOUSA NETO

    1999-01-01

    Full Text Available In this study, the effect on the setting time by the addition of different kinds of rosin and hydrogenated resin on the Grossman cement powder was evaluated. The experiments were carried out following the American Dental Association’s specification number 57 for root canal sealers. For this analysis, different Grossman cement powders were prepared using different rosins (X, WW and WG and hydrogenated resins (Staybelite and Staybelite ester 10. The study of the physicochemical properties of the Grossman cements obtained the different kinds of rosins and hydrogenated resins interference on the cement’s setting time. The hydrogenated resin, having a higher pH, increased the setting time of the cement when compared to the X, WW and WG rosins.No presente estudo, analisou-se o efeito da adição de diferentes tipos de breus e resinas hidrogenadas ao pó do cimento de GROSSMAN sobre o tempo de endurecimento. Os experimentos foram realizados de acordo com a Especificação 57 para materiais obturadores de canais radiculares da American Dental Association (ADA. Para análise, foram aviados pós do cimento de GROSSMAN com diferentes tipos de breu (X, WW e WG e resinas hidrogenadas (Stabylite e Stabylite éster 10. Os estudos das propriedades físico-químicas dos cimentos tipo GROSSMAN obtidos de diferentes tipos de breus e resinas hidrogenadas interferem no tempo de endurecimento do cimento. A resina hidrogenada, obtida do processo de hidrogenação tem o pH mais alto, provocando um aumento do tempo de endurecimento do cimento em relação aos breus tipo X, WW e WG, que têm pH mais ácido.

  5. Rosin-enabled ultraclean and damage-free transfer of graphene for large-area flexible organic light-emitting diodes

    Science.gov (United States)

    Zhang, Zhikun; Du, Jinhong; Zhang, Dingdong; Sun, Hengda; Yin, Lichang; Ma, Laipeng; Chen, Jiangshan; Ma, Dongge; Cheng, Hui-Ming; Ren, Wencai

    2017-02-01

    The large polymer particle residue generated during the transfer process of graphene grown by chemical vapour deposition is a critical issue that limits its use in large-area thin-film devices such as organic light-emitting diodes. The available lighting areas of the graphene-based organic light-emitting diodes reported so far are usually transfer method using rosin as a support layer, whose weak interaction with graphene, good solubility and sufficient strength enable ultraclean and damage-free transfer. The transferred graphene has a low surface roughness with an occasional maximum residue height of about 15 nm and a uniform sheet resistance of 560 Ω per square with about 1% deviation over a large area. Such clean, damage-free graphene has produced the four-inch monolithic flexible graphene-based organic light-emitting diode with a high brightness of about 10,000 cd m-2 that can already satisfy the requirements for lighting sources and displays.

  6. Cytoxicity, dynamic and thermal properties of bio-based rosin-epoxy resin/ castor oil polyurethane/ carbon nanotubes bio-nanocomposites.

    Science.gov (United States)

    Huo, Li; Wang, Dan; Liu, Hongmei; Jia, Pan; Gao, Jungang

    2016-08-01

    In order to prepare bio-nanocomposites with no-cytotoxicity, the rosin-based epoxy resin (MPAER) and castor oil-based polyurethane (COPU) were synthesized and carbon nanotubes (CNTs) was used to enhance the properties of curing MPAER/COPU materials. The curing reaction, dynamic mechanical and thermal properties of this system were characterized by FTIR, NMR, DMA, TG et al. The cytotoxicity of materials is evaluated for HeLa cells using a MTT cell-viability assay. The results showed that COPU can cure MPAER and CNTs can increase effectively the properties of MPAER/COPU nanocomposites. The Tg of MPAER/COPU/CNTs has the highest value when CNTs content is 0.4 wt%, which is 52.4 °C higher than the pure MPAER/COPU. Thermal stability of the nanocomposites is enhanced by the addition of CNTs, the initial decomposition temperature Td5 of the sample No. 0.4 has increased from 284.5 to 305.2 °C, which is 20.7 °C higher than No. 0. The impact strength of the No. 0.4 film is 15 kg cm higher than the pure resin system. The survival rate of HeLa cells to the products is greater than 90% within 48 and 72 h, which demonstrate that this material has excellent biocompatibility and no obvious cytotoxicity for HeLa cells, which may be used in the medical treatment.

  7. Erisoodustuste maksustamine / Ave Rego, Einar Rosin

    Index Scriptorium Estoniae

    Rego, Ave

    2018-01-01

    2017. aasta juulis jõustunud muudatustest, mis puudutavad erisoodustuse maksustamist ning 2018. aasta jaanuaris jõustunud töötaja tervise edendamiseks tehtavate kulutuste maksuvabastust puudutavast muudatusest

  8. Müügimehest koputajaks / Kevin Laye ; tekst Kreet Rosin

    Index Scriptorium Estoniae

    Laye, Kevin

    2011-01-01

    Intervjuu Kevin Laye'ga, kes on olnud ka kahekordne Euroopa meistrist karatees ja eriüksuse SAS liige, Roger Callahani loodud mõtteväljaravist (TFT, Thought Field Theraphy) ning teistest tehnikatest, mida ta on õppinud ning kasutab igapäevaselt

  9. Synthetic studies with Pinus elliottiis rosin derivatives. Oxidation of maleopimaric anhydride methyl ester and trimethyl fumaropimarate

    Directory of Open Access Journals (Sweden)

    Hess Sonia C.

    2000-01-01

    Full Text Available Ozonolysis of maleopimaric anhydride methyl ester in the presence of tetracyanoethylene led to an epoxide and an ozonide. Ozonolysis of the trimethyl fumaropimarate, followed by treatment with Me2S, led to an epoxide, a diene, a keto-acid and an allylic oxidation product. Some of the compounds obtained were active against Staphylococcus aureus, Bacillus subtilis and Micrococcus luteus.

  10. Assessment of Exposure to Sensitizing Rosin-derived Compounds from Electronics Soldering

    National Research Council Canada - National Science Library

    Bowerbank, Christopher

    1998-01-01

    .... A reaction system was constructed for trapping emission products. Particulate matter was collected on filters, and volatile organic compounds were collected on sorbent tube media for analysis by gas chromatography/mass spectrometry (GC/MS...

  11. Elisabeth Egel: Kui ma sporti ei teeks, oleksin kindlasti palju rohkem haige kui praegu / Jakob Rosin

    Index Scriptorium Estoniae

    Rosin, Jakob

    2015-01-01

    Elisabeth Egel on 15 aastane pime ujuja, kes üle maailma toimunud puuetega inimeste ujumisvõistlustelt on koju toonud mitmeid medaleid. Ta on pälvinud noore sportlase preemia 2011. aastal ning on aasta parasportlane 2014

  12. 78 FR 57852 - Warrior Rosin Spill Superfund Site, Holt, Tuscaloosa County, Alabama ; Notice of Settlement

    Science.gov (United States)

    2013-09-20

    ... Response, Compensation and Liability Act (CERCLA), the United States Environmental Protection Agency has... addresses costs from a fund- lead Removal Action taken by EPA at the Site. DATES: The Agency will consider...

  13. Just nagu mustkunst: võlgades firmad haihtusid politseinike ja maksuametnike silme all / Marta Jaakson ; kommenteerinud Marie Rosin

    Index Scriptorium Estoniae

    Jaakson, Marta

    2017-01-01

    Maksuvõlgadega firmad Lõuna Ehitus OÜ, EBG OÜ, Lõuna Ehitus Grupp OÜ, Joy Grupp OÜ, Caramira Pet Trade OÜ, Väike-Ameerika 2 OÜ, Legal & Business Solutions OÜ ühinesid Verones OÜ-ga ning kustutati äriregistrist ja võlad jäävad likvideerijate mureks

  14. Gaschromatographic and mass spectroscopic investigations of tall oil rosin acids and diterpenioc compounds and modified diterpene acids

    International Nuclear Information System (INIS)

    Mayr, M.

    1984-12-01

    Diterpene resin acids are important constituents of the coniferous wood. The composition of these nonvolatile extractives have been studied by a number of investigations; both naturally occurring resins (oleoresin) and distillation products of the alkaline sulfate pulping process (tall oil) were analyzed. These mixtures find important uses in chemical intermediates, paper sizes, ester gums, coatings and numerous other applications. Owing to the more ameliorate physical properties a major part of tall oil resin acids is chemically modified and is used in intermediate chemicals. Such modifications are the disproportionation in the presence of certain catalysts and the formation of Diels-Alder adducts. The present study was undertaken to obtain detailed information of the overall composition of diterpenoid compounds and to achieve a separation of the complex natural and tall oil mixtures using high resolution glass capillary columns. Furthermore, one objective was to characterize the identified diterpene compounds and Diels-Alder adducts by relative retention values. Additionally the presence of some major adduct components in the modified samples was checked by comparison with pure specimens, independently synthesized or purified by crystallization and the mechanism of the Diels-Alder reaction was investigated. A compilation of the mass spectra of the substances detected in the different samples closes this work. (Author)

  15. 7 CFR 160.201 - Fees generally for field inspection and certification of naval stores and drum containers of rosin.

    Science.gov (United States)

    2010-01-01

    ... Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... concentration and storage yards, subsequent to grading, per drum—$2.25. (iv) Examination of the external or... inspector or the Chief of the Marketing Programs Branch has been advised regarding the location, nature...

  16. Õiguslikud probleemid ja korruptsioon riigihangetes : [bakalaureusetöö] / Külli Rosin ; Tartu Ülikool, õigusteaduskond ; juhendaja: Lasse Lehis

    Index Scriptorium Estoniae

    Rosin, Külli

    2001-01-01

    Korruptsiooni mõiste ja aktuaalsus, riigihanked Eestis, mõiste, objektid ja subjektid, korruptsiooni piiravad riigihankemenetluse põhimõtted, riigihankemenetluse etapid, vaidluste lahendamise kord

  17. Natural Rosin-based Phosphate Diester Surfactant Assisted One-step Synthesis of 3D Flowerlikeβ-Ni(OH)2/γ-Ni(OH)2 Composite Nano-microspheres

    Institute of Scientific and Technical Information of China (English)

    BoShi Wu; Juan Li; ChunRui Han; Feng Xu

    2018-01-01

    Self-assembled uniform 3Dflowerlikeβ-Ni(OH)2/g-Ni(OH)2composite nano-microspheres with hollow interiors were successfully synthesized via a facile aqueous-ethanol mixed solvothermal method, using nickel sulfate as a precursor, urea as a precipitant, and dehydroabietic based phosphate diester sodium (DDPDS) as a surfactant. The prepared 3D flowerlikeβ-Ni(OH)2/g-Ni(OH)2composite nano-microspheres were tested as supercapacitors in a two-electrode cell with 6 mol/L KOH electrolyte. In addition, the influence of DDPDS concentration on the morphology and size of 3Dflowerlikeβ-Ni(OH)2/g-Ni(OH)2composite nano-microspheres was studied at 180℃. X-ray diffraction (XRD), scanning electron microscopy (SEM), BET(Brunauer, Emmett and Teller)techniques, and equity default swap (EDS) were used to characterize the structure, morphology, and size of the as-prepared samples. Moreover, a possible formation mechanism of the 3Dflowerlikeβ-Ni(OH)2/g-Ni(OH)2composite nano-microspheres was proposed based on the effects of DDPDS concentrationand reaction time. The surfactant micelles were used as soft templates to induce the self-assembly of nanosheets. The crystallinity of the 3D flowerlikeβ-Ni(OH)2/g-Ni(OH)2composite nano-microspheres improved with the increase of DDPDS concentration, and the morphology and size of synthetic nano-microspheres could be controlled.

  18. An Inquiry into the Resilience of U.S. Navy Recruits

    Science.gov (United States)

    2015-12-01

    15. Luthar, S. S., Cicchetti, D., & Becker , B. (2000). The construct of resilience: A critical evaluation and guidelines for future work. Child...research suggests that resilience supports one’s ability to positively adjust in adverse conditions (Luthar, Cicchetti, & Becker , 2000; Sutcliffe...5.2 5.3 5.4 5.5 5.6 5.7 T1 T2 T3 T4 R es il ie n ce M ea n Time Points T1 - T4 General Males Females Males w/Females Males w/o Females 28 c. All

  19. Examining the Moderating Role of Family Cohesion on the Relationship between Witnessed Community Violence and Delinquency in a National Sample of Adolescents

    Science.gov (United States)

    Barr, Simone C.; Hanson, Rochelle; Begle, Angela M.; Kilpatrick, Dean G.; Saunders, Benjamin; Resnick, Heidi; Amstadter, Ananda

    2012-01-01

    Witnessed community violence has been linked to a number of internalizing and externalizing problems in adolescents. Guided by Cicchetti and Lynch's (1993) ecological-transactional model, this study aimed to examine the impact that family-level factors had on negative outcomes associated with witnessed community violence. Using a nationally…

  20. The Role of Friendship within Social Networks of Divisions at Recruit Training Command and its Effect on the Resilience of Naval Recruits

    Science.gov (United States)

    2017-06-01

    Review, 2(3), 538–555. doi: 10.2307/259141 Luthar, S. S., Cicchetti, D., & Becker , B. (2000). The construct of resilience: a critical evaluation and...Friendship Network at T2 . Integrated Division–Received No Intervention...54  Figure 11.  Division 1 Venting Network at T2 . Integrated Division–Received No Intervention

  1. 21 CFR 172.210 - Coatings on fresh citrus fruit.

    Science.gov (United States)

    2010-04-01

    ... a 2:1 ratio. Sodium lauryl sulfate Complying with § 172.822. As a film former. Wood rosin Color of K... adjuvant. Potassium persulfate Do. Propylene glycol alginate Do. Sodium decylbenzenesulfonate Do. (4) In...

  2. Doktoritöö trammi arvutipõhise juhtimise, seire ja diagnostika alal / Rain Lahtmets

    Index Scriptorium Estoniae

    Lahtmets, Rain

    2005-01-01

    30. aug. kaitses Tallinna Tehnikaülikooli energeetikateaduskonnas oma väitekirja "Kergrööbastranspordi juhtimine, talitusjärelvalve ja diagnostika" elektriajamite ja jõuelektroonika instituudi teadur Argo Rosin

  3. Cyber Capabilities for Global Strike in 2035

    Science.gov (United States)

    2012-02-15

    Internet’s Cyber Future.” Charlie Rose Show (MSNBC), 19 February 2009. Rosin, Col Randolph. “To Kill a Mockingbird : The Deconstruction of Information...http://www.af.mil/information/factsheets/factsheet.asp?id=182 (accessed: 6 February 2012). 75 Colonel Randolph Rosin, “To Kill a Mockingbird : The...functional effects” are analogous to conventional “ kill mechanisms.”67 The simplest warfare functional effect in cyberspace is deliberate disruption of

  4. Optimizing and Validating a Brief Assessment for Identifying Children of Service Members at Risk for Psychological Health Problems Following Parent Deployment

    Science.gov (United States)

    2017-09-01

    children’s psych health and development at pre- mid- and post-timepoints. Children participate through doll and puppet play interview. Teacher ratings...Regulation and Dysregulation: Development , Factor Structure, and Initial Validation of the Difficulties in Emotion Regulation Scale. Journal of...Psychiatry, 127, 1653-1658. Shields, A.M., & Cicchetti, D. (1997). Emotion regulation among school-age children : The development and validation of a new

  5. Childhood Maltreatment and Its Effect on Neurocognitive Functioning: Timing and Chronicity Matter

    Science.gov (United States)

    Cowell, Raquel A.; Cicchetti, Dante; Rogosch, Fred A.; Toth, Sheree L.

    2015-01-01

    Childhood maltreatment represents a complex stressor, with the developmental timing, duration, frequency, and type of maltreatment varying with each child (Barnett, Manly, & Cicchetti, 1993; Cicchetti & Manly, 2001). Multiple brain regions and neural circuits are disrupted by the experience of child maltreatment (Cicchetti & Toth, in press; DeBellis et al., 2002; McCrory & Viding, 2010; Teicher, Anderson, & Polcari, 2012). These neurobiological compromises indicate the impairment of a number of important cognitive functions, including working memory and inhibitory control. The present study extends prior research by examining the effect of childhood maltreatment on neurocognitive functioning based on developmental timing of maltreatment, including onset, chronicity, and recency, in a sample of 3- to 9-year-old nonmaltreated (n = 136) and maltreated children (n = 223). Maltreated children performed more poorly on inhibitory control and working memory tasks than nonmaltreated children. Group differences between maltreated children based on the timing of maltreatment and the chronicity of maltreatment also were evident. Specifically, children who were maltreated during infancy, and children with a chronic history of maltreatment, exhibited significantly poorer inhibitory control and working memory performance than children without a history of maltreatment. The results suggest that maltreatment occurring during infancy, a period of major brain organization, disrupts normative structure and function, and these deficits are further instantiated by the prolonged stress of chronic maltreatment during the early years of life. PMID:25997769

  6. Töölepingu seaduse § 37 : kas tööandja võimalus oma äranägemise järgi töötasu vähendada või turvalise paindlikkuse rakendamise positiivne näide? / Annika Rosin

    Index Scriptorium Estoniae

    Rosin, Annika

    2013-01-01

    Millistel tingimustel on võimalik tööandjal ühepoolselt töötasu vähendada, kas ja kuidas on vastav reeglistik võrreldes varasemaga muutunud ning kas sellise võimaluse andmine on kooskõlas turvalise paindlikkuse kontseptsiooniga

  7. Temperature dependent rapid annealing effect induces amorphous aggregation of human serum albumin.

    Science.gov (United States)

    Ishtikhar, Mohd; Ali, Mohd Sajid; Atta, Ayman M; Al-Lohedan, Hammad; Badr, Gamal; Khan, Rizwan Hasan

    2016-01-01

    This study represents an analysis of the thermal aggregation of human serum albumin (HSA) induced by novel rosin modified compounds. The aggregation process causes conformational alterations in the secondary and tertiary structures of the proteins. The conversion of globular protein to amorphous aggregates was carried out by spectroscopic, calorimetric and microscopic techniques to investigate the factors that are responsible for the structural, conformational and morphological alteration in the protein. Our outcome results show that the aggregation of HSA was dependent on the hydrophobicity, charge and temperature, because the formation of amorphous aggregates occurs in the presence of a novel cationic rosin compound, quaternary amine of rosin diethylaminoethyl ester (QRMAE), at 40°C and pH 7.4 (but at 25°C on similar pH value, there was no evidence of aggregate formation). In addition, the parent compound of QRMAE, i.e., abietic acid, and other derivatives such as nonionic rosin compounds [(RMPEG-750) and (RMA-MPEG-750)] do not shows the aggregating property. This work provides precise and necessary information that aid in the understanding the effects of rosin derivative compounds on HSA. This study also restrains important information for athletes, health providers, pharmaceutical companies, industries, and soft drink-processing companies. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Analysis of abietic acid and dehydroabietic acid residues in raw ducks and cooked ducks.

    Science.gov (United States)

    Zhu, Yongzhi; Zhang, Suzhen; Geng, Zhiming; Wang, Daoying; Liu, Fang; Zhang, Muhan; Bian, Huan; Xu, Weimin

    2014-10-01

    Rosin was once widely used for removal of duck feathers in China and is still being used secretly in some poultry processing enterprises. Abietic acid (AA) and dehydroabietic acid (DHAA) are the major compounds of rosin. In the present study, 90 duck samples were collected for investigation of AA and DHAA residues. Abietic acid and DHAA were simultaneously detected in 13 out 40 raw ducks, 8 out of 26 water-boiled salted ducks, and 7 out of 24 roasted ducks, respectively. In positive samples, averages of AA were significantly higher than those of DHAA in positive samples of the 3 types of ducks (P ducks were significantly higher than those in positive roasted ducks (P ducks were defeathered by means of rosin-containing defeathering agent, and cooking processes could reduce the AA and DHAA residues to some extent, but could not eliminate them completely. ©2014 Poultry Science Association Inc.

  9. Preparation of a bio-based epoxy with comparable properties to those of petroleum-based counterparts

    Directory of Open Access Journals (Sweden)

    X. Q. Liu

    2012-04-01

    Full Text Available In this paper a bio-based epoxy with outstanding thermal and mechanical properties was synthesized using a rosin-based epoxy monomer and a rosin-based curing agent. The chemical structures of rosin based epoxy monomer and curing agent were confirmed by Nuclear Magnetic Resonance (NMR and Fourier Transform Infrared (FT-IR spectra. The flexural mechanical and dynamic mechanical properties as well as thermal stability of the cured epoxy were investigated. The results showed that the cured epoxy exhibited a glass transition temperature (Tg of 164°C and its flexural strength and modulus were as high as 70 and 2200 MPa, respectively. This indicated that a wholly bio-based epoxy resin possessing high performance was successfully obtained.

  10. 21 CFR 179.45 - Packaging materials for use during the irradiation of prepackaged foods.

    Science.gov (United States)

    2010-04-01

    ... §§ 178.3740 and 181.22 through 181.30 of this chapter, sodium citrate, sodium lauryl sulfate, polyvinyl... citrate, sodium lauryl sulfate, polyvinyl chloride, and materials as listed in paragraph (d)(2)(i) of this.... (5) Kraft paper prepared from unbleached sulfate pulp to which rosin, complying with § 178.3870 of...

  11. Distributed Name Management.

    Science.gov (United States)

    1985-02-01

    inc through the trials and tribulations ofbeing a graduate student while , maintaining some pcrspective on self and life , Axel and Kathy Rosin and...shlid( be Uiversal . Naring pi)l))[lls arid f’ZIC ilities can not be split along [lie bonudarlies of’ (lhe typ~es or objects be inrg inamedl. Saltierl

  12. 77 FR 21769 - Certain New Chemicals; Receipt and Status Information

    Science.gov (United States)

    2012-04-11

    ... marketing exemption (TME), and to publish in the Federal Register periodic status reports on the new... marketing'' purposes, which is referred to as a test marketing exemption, or TME. For more information about... sulfonated, hydrogenated rosin and copper phthalocyanine with mixed chlorides. P-12-0207 02/29/2012 05/28...

  13. 7 CFR 160.35 - Illegible inspection marks.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... the proper grade or identity of the rosin. No fee will be charged for this service, but the cost of...

  14. Predicting fragmentation sizing profiles for different blasting patterns

    International Nuclear Information System (INIS)

    Sheikh, A.M.; Chung, S.H.

    1987-01-01

    This paper evaluates the efficiency of blasting in a large scale underground heap leaching operation. The prediction model is based on the dynamic tensile breaking strength of rock formation, the detonation characteristics of the explosives and the drill hole pattern. The modelling includes crack pattern development and fragmentation computation fitted by the Rosin-Rammler distribution equation

  15. Preparing students for workplace learning in higher engineering education

    NARCIS (Netherlands)

    Dehing, A.J.M.

    2012-01-01

    Student preparation for professional practice is an important course aim in the education of engineers by the universities of applied sciences (Geurts & Meijers, 2004; Sheppard, et al., 2008; Sullivan & Rosin, 2008). Since the start of the professional engineering schools at the beginning of the

  16. Pretinning Nickel-Plated Wire Shields

    Science.gov (United States)

    Igawa, J. A.

    1985-01-01

    Nickel-plated copper shielding for wires pretinned for subsequent soldering with help of activated rosin flux. Shield cut at point 0.25 to 0.375 in. (6 to 10 mm) from cut end of outer jacket. Loosened end of shield straightened and pulled toward cut end. Insulation of inner wires kept intact during pretinning.

  17. Service-Learning and Philanthropy: Implications for Course Design

    Science.gov (United States)

    Hatcher, Julie A.; Studer, Morgan L.

    2015-01-01

    Developing good citizens is an historic role for higher education (Sullivan & Rosin, 2008) and the emergence of service-learning as a pedagogical strategy has heightened attention to the intentional educational objectives to be addressed in higher education. This article examines the role of service-learning in developing philanthropic values…

  18. Journal of Biosciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Biosciences. Adrian Surmacki. Articles written in Journal of Biosciences. Volume 36 Issue 4 September 2011 pp 691-699 Articles. Differences in predatory pressure on terrestrial snails by birds and mammals · Zuzanna M Rosin Paulina Olborska Adrian Surmacki Piotr Tryjanowski · More Details ...

  19. 7 CFR 160.74 - Loan of standards without security.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Loan of standards without security. 160.74 Section 160... REGULATIONS AND STANDARDS FOR NAVAL STORES Loan and Care of United States Standards § 160.74 Loan of standards without security. Duplicates of the United States Standards for rosin may be loaned without deposit of...

  20. 7 CFR 160.75 - Loan of standards under security deposit.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Loan of standards under security deposit. 160.75... REGULATIONS AND STANDARDS FOR NAVAL STORES Loan and Care of United States Standards § 160.75 Loan of standards under security deposit. Duplicates of the United States Standards for rosin may be loaned to interested...

  1. 7 CFR 160.89 - Medicinal preparations.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Medicinal preparations. 160.89 Section 160.89... STANDARDS FOR NAVAL STORES Sales and Shipments § 160.89 Medicinal preparations. A compound or mixture containing spirits of turpentine or rosin, or both, with other drugs, when sold for medicinal purposes, is...

  2. 21 CFR 82.1051 - Lakes (D&C).

    Science.gov (United States)

    2010-04-01

    ..., gloss white, clay, titanium dioxide, zinc oxide, talc, rosin, aluminum benzoate, calcium carbonate, or any combination of two or more of these, (i) one of the straight colors (except lakes) listed in... from one of the straight colors (except lakes) listed in subpart B, or hereinbefore listed in this...

  3. Non-Petroleum Oils

    Science.gov (United States)

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  4. Examining the moderating role of family cohesion on the relationship between witnessed community violence and delinquency in a national sample of adolescents.

    Science.gov (United States)

    Barr, Simone C; Hanson, Rochelle; Begle, Angela M; Kilpatrick, Dean G; Saunders, Benjamin; Resnick, Heidi; Amstadter, Ananda

    2012-01-01

    Witnessed community violence has been linked to a number of internalizing and externalizing problems in adolescents. Guided by Cicchetti and Lynch's (1993) ecological-transactional model, this study aimed to examine the impact that family-level factors had on negative outcomes associated with witnessed community violence. Using a nationally representative sample, we explored the moderational role of family cohesion in the relationship between witnessing community violence and delinquent behavior while taking demographic variables into account. Results from the investigation suggested that low levels of family cohesion were predictive of delinquency after controlling for race, gender, past delinquency, and direct trauma. In addition, the findings suggested that family cohesion moderated the impact of witnessed community violence on future delinquent behavior. Future directions for research and implications for practice were also discussed.

  5. Transformation and Self-Similarity Properties of Gamma and Weibull Fragment Size Distributions

    Science.gov (United States)

    2015-12-01

    the spatial dimension ( 31 m ). For classic aerosols with nearly-spherical droplets, 3m and 6/s . Alternatively, Wittel et. al. (2006...which come from the definitions of )(DFM , )(MFM , )(DF , and )(MF . The fourth transformation equation is as follows: )(~)( DfDDf mM... dimension defined by Equation (2), )(x is the gamma function, and ),( xs is the upper incomplete gamma function. Table 1a. Rosin-Rammler (a.k.a

  6. Sound / Märt Milter

    Index Scriptorium Estoniae

    Milter, Märt

    1998-01-01

    Uute plaatide Rolling Stones "No Security", Spiritualized "Live At The Royal Albert Hall", Kelly family "From Their Hearts", Arnold "Hillside Album", Joe Cocker "Greatest Hits", OST "Acid House", Songs from Andrew Lloyd Webber and Jim Steinmans "Whistle Down The Wind", The Weather Girls "PuttinÒn The Hits", Cliff Richard "Real As I Wanna Be", Folkmill "Topelt rosin", SIG "Sig 20v. Juhla-EP", "Motown Celebrates Sinatra", John Lee Hooker "Best Of Friends"

  7. Redefining Information Warfare Boundaries for an Army in a Wireless World

    Science.gov (United States)

    2013-01-01

    development. For example, such a generic requirement might involve detection, identification, tracking, and kill - ing a class of targets by nonkinetic...Merging Information Operations and Psychological Operations,” Military Review, January–February 2008, pp. 108–111. Rosin, Randolph, “To Kill a... Mockingbird : The Deconstruction of Information Operations,” Small Wars Journal, August 17, 2009. As of December 6, 2010: http://smallwarsjournal.com/blog

  8. Lambda-Cyhalothrin Nanosuspension Prepared by the Melt Emulsification-High Pressure Homogenization Method

    OpenAIRE

    Pan, Zhenzhong; Cui, Bo; Zeng, Zhanghua; Feng, Lei; Liu, Guoqiang; Cui, Haixin; Pan, Hongyu

    2015-01-01

    The nanosuspension of 5% lambda-cyhalothrin with 0.2% surfactants was prepared by the melt emulsification-high pressure homogenization method. The surfactants composition, content, and homogenization process were optimized. The anionic surfactant (1-dodecanesulfonic acid sodium salt) and polymeric surfactant (maleic rosin-polyoxypropylene-polyoxyethylene ether sulfonate) screened from 12 types of commercially common-used surfactants were used to prepare lambda-cyhalothrin nanosuspension with ...

  9. Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives.

    Science.gov (United States)

    Kozowyk, P R B; Langejans, G H J; Poulis, J A

    2016-01-01

    The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives.

  10. Evaluation of certain food additives and contaminants.

    Science.gov (United States)

    2013-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and a food contaminant with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for seven food additives (advantame; glucoamylase from Trichoderma reesei expressed in Trichoderma reesei; glycerol ester of gum rosin; glycerol ester of tall oil rosin; glycerol ester of wood rosin; nisin; and octenyl succinic acid modified gum arabic) and an assessment of dietary exposure to cadmium from cocoa and cocoa products. Specifications for the following food additives were revised: annatto extracts (solvent-extracted bixin and solvent-extracted norbixin); Benzoe tonkinensis; food additives containing aluminium and/or silicon; mineral oil (medium viscosity); modified starches; paprika extract; phosphates (analytical methods for the determination of phosphorus and revision of specifications); 3-phytase from Aspergillus niger expressed in Aspergillus niger; potassium aluminium silicate; and potassium aluminium silicate-based pearlescent pigments. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminant considered.

  11. Anti-Inflammatory and Neuroprotective Effects of Constituents Isolated from Rhodiola rosea

    Directory of Open Access Journals (Sweden)

    Yeonju Lee

    2013-01-01

    Full Text Available To determine the biological activity of Rhodiola rosea, the protein expression of iNOS and proinflammatory cytokines was measured after the activation of murine microglial BV2 cells by LPS under the exposure of constituents of Rhodiola rosea: crude extract, rosin, rosarin, and salidroside (each 1–50 μg/mL. The LPS-induced expression of iNOS and cytokines in BV2 cells was suppressed by the constituents of Rhodiola rosea in a concentration-dependent manner. Also the expression of the proinflammatory factors iNOS, IL-1β, and TNF-α in the kidney and prefrontal cortex of brain in mice was suppressed by the oral administration of Rhodiola rosea crude extract (500 mg/kg. To determine the neuroprotective effect of constituents of Rhodiola rosea, neuronal cells were activated by L-glutamate, and neurotoxicity was analyzed. The L-glutamate-induced neurotoxicity was suppressed by the treatment with rosin but not by rosarin. The level of phosphorylated MAPK, pJNK, and pp38 was increased by L-glutamate treatment but decreased by the treatment with rosin and salidroside. These results indicate that Rhodiola rosea may have therapeutic potential for the treatment of inflammation and neurodegenerative disease.

  12. Control of Macromolecular Architectures for Renewable Polymers: Case Studies

    Science.gov (United States)

    Tang, Chuanbing

    The development of sustainable polymers from nature biomass is growing, but facing fierce competition from existing petrochemical-based counterparts. Controlling macromolecular architectures to maximize the properties of renewable polymers is a desirable approach to gain advantages. Given the complexity of biomass, there needs special consideration other than traditional design. In the presentation, I will talk about a few case studies on how macromolecular architectures could tune the properties of sustainable bioplastics and elastomers from renewable biomass such as resin acids (natural rosin) and plant oils.

  13. Eesti-Leedu sõpruskohtumised / Maarin Ektermann

    Index Scriptorium Estoniae

    Ektermann, Maarin

    2007-01-01

    Noorte maalikunstnike ühisnäitused "Shoot or Shout - No Escape" Vilniuse Art's Printing House'is 19. X-3. XI 2006 (lisaks kodus maalitud töödele maalisid Aivar Reisner, Sirli Hein ja Rait Rosin remake'e leedu kunstnike töödest) ja "Fresh Paint" Vaal-galeriis 29. III-17. IV. Paaride Triinu Lill ja Agne Jonkute, Sirli Hein ja Sandra Lukoshevichiute, Agne Kulbyte ja Merike Estna ning Rait Rosina, Konstantinas Gaitanzhi ja Elis Saarevälja töödest

  14. Research into spectra transformation of cooling tower droplet drift

    International Nuclear Information System (INIS)

    Mandrykin, G.P.

    1990-01-01

    Empirical droplet-diameter distributions in a cooling tower and outside are well approximated by the Rosin-Rammler-Bennet two-parameter function. Fractional efficiency of eliminators is also approximated by the above function fairly well. The design formulas proposed are universal and allow evaluation of droplet spectra transformation as well as the efficiency of measures for preventing droplet emissions from cooling towers both at the design and operation stages. Estimates of cooling tower droplet emissions calculated by the formulas suggested may be recommended as input data applied to the solution of environmental pollution problems and their assessment

  15. Factors Influencing Hemispheric Specialization.

    Science.gov (United States)

    1982-05-01

    eyposuro -’va’ irsufficient to allow enoug7h depth of 2ros-in- t o occur ( Craik ^ Lockhart , 1972). The pres-nt *xrirrent .%Il to . the Fardyck et al... levels of processing theory offer another way of explaining these results. 14hen the stimulus is unfamiliar, contains no meanin7ful material, and is...et al. (1978) nor the levels of processing theory (1,"oscovitch et al., 1976) can explain the results obtained for the familiar type of stimulus

  16. Drop size measurements in Venturi scrubbers

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Alonso, D.; Azzopardi, B.J. [Nottingham Univ. (United Kingdom). Dept. of Chemical Engineering; Goncalves, J.A.S.; Coury, J.R. [Universidade Federal de Sao Carlos (Brazil). Departamento de Engenharia Quimica

    2001-07-01

    Venturi scrubbers are high efficiency gas cleaners in which suspended particles are removed from gas streams by drops formed by liquid atomisation, usually in the Venturi throat. The size of the drops formed are of fundamental importance to the performance of the equipment, both in terms of pressure drop and dust removal efficiency. In this study, drop sizes in a cylindrical laboratory-scale Venturi scrubber were measured using a laser diffraction technique. Gas velocity and liquid to gas ratios varied from 50 to 90 m/s and 0.5 to 2.0 1/m{sup 3}, respectively. Water was injected using two different arrangements: either as jets in the throat or as a film just upstream of the convergence. Drop size measurements were performed at three positions in the case of jet injection: two located along the throat, and the last one at the end of the diffuser. The present data shows that the Sauter mean diameter of the spray can be well correlated by the equation of Boll et al. (J. Air Pollut. Control Assoc. 24 (1974) 932). Drop size distributions are satisfactorily represented by a Rosin-Rammler function. This paper also provides a simple method for calculating the parameters of the Rosin-Rammler function. As a result of this work, drop sizes in Venturi scrubbers can be estimated with much higher accuracy. (Author)

  17. Study on characteristics of printed circuit board liberation and its crushed products.

    Science.gov (United States)

    Quan, Cui; Li, Aimin; Gao, Ningbo

    2012-11-01

    Recycling printed circuit board waste (PCBW) waste is a hot issue of environmental protection and resource recycling. Mechanical and thermo-chemical methods are two traditional recycling processes for PCBW. In the present research, a two-step crushing process combined with a coarse-crushing step and a fine-pulverizing step was adopted, and then the crushed products were classified into seven different fractions with a standard sieve. The liberation situation and particle shape in different size fractions were observed. Properties of different size fractions, such as heating value, thermogravimetric, proximate, ultimate and chemical analysis were determined. The Rosin-Rammler model was applied to analyze the particle size distribution of crushed material. The results indicated that complete liberation of metals from the PCBW was achieved at a size less than 0.59 mm, but the nonmetal particle in the smaller-than-0.15 mm fraction is liable to aggregate. Copper was the most prominent metal in PCBW and mainly enriched in the 0.42-0.25 mm particle size. The Rosin-Rammler equation adequately fit particle size distribution data of crushed PCBW with a correlation coefficient of 0.9810. The results of heating value and proximate analysis revealed that the PCBW had a low heating value and high ash content. The combustion and pyrolysis process of PCBW was different and there was an obvious oxidation peak of Cu in combustion runs.

  18. Sustainable Triblock Copolymers for Application as Thermoplastic Elastomers

    Science.gov (United States)

    Ding, Wenyue; Wang, Shu; Ganewatta, Mitra; Tang, Chuanbing; Robertson, Megan

    Thermoplastic elastomers (TPEs), combining the processing advantages of thermoplastics with the flexibility and extensibility of elastomeric materials, have found versatile applications in industry, including electronics, clothing, adhesives, and automotive components. ABA triblock copolymers, in which A represents glassy endblocks and B the rubbery midblock, are commercially available as TPEs, such as poly(styrene-b-butadiene-b-styrene) (SBS) or poly(styrene-b-isoprene-b-styrene) (SIS). However, the commercial TPEs are derived from fossil fuels. The finite availability of fossil fuels and the environmental impact of the petroleum manufacturing have led to the increased interest in the development of alternative polymeric materials from sustainable sources. Rosin acids are promising replacement for the petroleum source due to their abundance in conifers, rigid molecular structures, and ease of functionalization. In this study, we explored the utilization of a rosin acid derivative, poly(dehydroabietic ethyl methacrylate) (PDAEMA), as a sustainable alternative for the glassy domain. The triblock copolymer poly(dehydroabietic ethyl methacrylate-b-n-butyl acylate-b-dehydroabietic ethyl methacrylate) (DnBD) was synthesized and characterized. DnBD exhibited tunable morphological and thermal properties. Tensile testing revealed elastomeric behavior.

  19. Development of low energy electron beam irradiation techniques. Application to sticking adhesive

    International Nuclear Information System (INIS)

    Ito, Hisashi; Enomoto, Ichiro

    1997-01-01

    Sticking adhesives were developed by use of blend with electron beam crosslinked type stylene - isoprene block copolymer (SIS) as a basic component. The sticking adhesive has object to change from sticking to adhesion and peeling by irradiation. SIS was blended with reactive monomer and resins or alicyclic hydrocarbon as tackifier and investigated. The results showed change of peel force by irradiation was influenced by compatibility, composition and the quality of objective materials. SIS such as Kraton D1320X (Shell Co. Ltd.) and tackifier such as rosin (ROSIN) and arcone P100 (ARP) were used at the basic ratio SIS/tackifier=64. Modified urethane acrylate (UA306H), isobornyl acrylate (IBXA), epoxy ester (3002M), lauryl methacrylate (LM) and lauryl acrylate (LA) were used as monomer. The large changes of peel force were observed by blends with UA306H or 3002M of which properties were incompatibility. These results indicated that we made possible to control the peel force by irradiation by means of adding the specific incompatibility monomer to the mixture of SIS and tackifier. (S.Y.)

  20. Understanding adolescent personality pathology from growth trajectories of childhood oddity.

    Science.gov (United States)

    De Clercq, Barbara; Verbeke, Lize; De Caluwé, Elien; Vercruysse, Tom; Hofmans, Joeri

    2017-10-01

    Research on developmental trajectories of early maladaptive features for understanding later personality disorders (PDs) is increasingly recognized as an important study area. The course of early odd features is highly relevant in this regard, as only a few researchers have addressed childhood oddity in the context of emerging PDs. Using latent growth modeling, the current study explores growth parameters of odd features in a mixed sample of Flemish community and referred children (N = 485) across three measurement waves with 1-year time intervals. Personality pathology was assessed at a fourth assessment point in adolescence. Beyond a general declining trend in oddity characteristics, the results demonstrated that both an early onset and an increasing trend of oddity-related characteristics over time are independent predictors of adolescent PDs. Childhood oddity tends to be the most manifest precursor for PDs with a core oddity feature (i.e., the schizotypal and borderline PD), but also appears to predict most of the other DSM-5 PDs. Results are discussed from an overarching developmental framework on PDs (Cicchetti, 2014), specifically focusing on the principle of multifinality. From a clinical perspective, the significance of increasing or steady-high childhood oddity trajectories for adolescent PDs highlights the relevance of systematic screening processes across time.

  1. Toward a consensus definition of pathological video-gaming: a systematic review of psychometric assessment tools.

    Science.gov (United States)

    King, Daniel L; Haagsma, Maria C; Delfabbro, Paul H; Gradisar, Michael; Griffiths, Mark D

    2013-04-01

    Pathological video-gaming, or its proposed DSM-V classification of "Internet Use Disorder", is of increasing interest to scholars and practitioners in allied health disciplines. This systematic review was designed to evaluate the standards in pathological video-gaming instrumentation, according to Cicchetti (1994) and Groth-Marnat's (2009) criteria and guidelines for sound psychometric assessment. A total of 63 quantitative studies, including eighteen instruments and representing 58,415 participants, were evaluated. Results indicated that reviewed instrumentation may be broadly characterized as inconsistent. Strengths of available measures include: (i) short length and ease of scoring, (ii) excellent internal consistency and convergent validity, and (iii) potentially adequate data for development of standardized norms for adolescent populations. However, key limitations included: (a) inconsistent coverage of core addiction indicators, (b) varying cut-off scores to indicate clinical status, (c) a lack of a temporal dimension, (d) untested or inconsistent dimensionality, and (e) inadequate data on predictive validity and inter-rater reliability. An emerging consensus suggests that pathological video-gaming is commonly defined by (1) withdrawal, (2) loss of control, and (3) conflict. It is concluded that a unified approach to assessment of pathological video-gaming is needed. A synthesis of extant research efforts by meta-analysis may be difficult in the context of several divergent approaches to assessment. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Disinhibited social engagement in postinstitutionalized children: differentiating normal from atypical behavior.

    Science.gov (United States)

    Lawler, Jamie M; Hostinar, Camelia E; Mliner, Shanna B; Gunnar, Megan R

    2014-05-01

    The most commonly reported socially aberrant behavior in postinstitutionalized (PI) children is disinhibited social engagement (DSE; also known as indiscriminate friendliness). There is no gold standard for measurement of this phenomenon nor agreement on how to differentiate it from normative behavior. We adopted a developmental psychopathology approach (Cicchetti, 1984) to study this phenomenon by comparing it to normative social development and by studying its patterns over time in 50 newly adopted PI children (16-36 months at adoption) compared with 41 children adopted early from foster care overseas and 47 nonadopted (NA) controls. Using coded behavioral observations of the child's interaction with an unfamiliar adult, atypical behaviors were differentiated from normative behaviors. Principal components analysis identified two dimensions of social disinhibition. The nonphysical social dimension (e.g., initiations, proximity) showed wide variation in NA children and is therefore considered a typical form of sociability. Displays of physical contact and intimacy were rare in NA children, suggesting that they represent an atypical pattern of behavior. Both adopted groups demonstrated more physical DSE behavior than NA children. There were no group differences on the nonphysical factor, and it increased over time in all groups. Implications for understanding the etiology of DSE and future directions are discussed.

  3. Long-Term Effects of Soldering By-Products on Nickel-Coated Copper Wire

    Science.gov (United States)

    Rolin, T. D.; Hodge, R. E.

    2008-01-01

    An analysis of thirty-year-old, down graded flight cables was conducted to determine the makeup of a green material on the surface of the shielded wire near soldered areas and to ascertain if the green material had corroded the nickel-coated copper wire. Two likely candidates were possible due to the handling and environments to which these cables were exposed. The flux used to solder the cables is known to contain abietic acid, a carboxylic acid found in many pine rosins used for the soldering process. The resulting material copper abietate is green in color and is formed during the application of heat during soldering operations. Copper (II) chloride, which is also green in color is known to contaminate flight parts and is corrosive. Data is presented that shows the material is copper abietate, not copper (II) chloride, and more importantly that the abietate does not aggressively attack nickel-plated copper wire.

  4. Disruptive Technologies in Workmanship: pH-neutral Flux, CDM ESD Events, HDI PCBs

    Science.gov (United States)

    Plante, Jeannette F.

    2010-01-01

    This slide presentation describes what it calls "disruptive technologies", i.e., "Low-end disruption" occurs when the rate at which products improve exceeds the rate at which customers can adopt the new performance. Therefore, at some point the performance of the product overshoots the needs of certain customer segments. At this point, a disruptive technology may enter the market and provide a product which has lower performance than the incumbent but which exceeds the requirements of certain segments, thereby gaining a foothold in the market. This concept is viewed in impacting incumbent technologies Rosin Flux, with a pH-neutral water soluble Flux; electrostatic discharge models being disrupted by the charge device model (CDM) concept; and High Density Interconnect Printed Circuit Boards (HDI PCB).

  5. Automated cleaning of electronic components

    International Nuclear Information System (INIS)

    Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

    1994-01-01

    Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations

  6. The use of mental models in chemical risk protection: developing a generic workplace methodology.

    Science.gov (United States)

    Cox, Patrick; Niewöhmer, Jörg; Pidgeon, Nick; Gerrard, Simon; Fischhoff, Baruch; Riley, Donna

    2003-04-01

    We adopted a comparative approach to evaluate and extend a generic methodology to analyze the different sets of beliefs held about chemical hazards in the workplace. Our study mapped existing knowledge structures about the risks associated with the use of perchloroethylene and rosin-based solder flux in differing workplaces. "Influence diagrams" were used to represent beliefs held by chemical experts; "user models" were developed from data elicited from open-ended interviews with the workplace users of the chemicals. The juxtaposition of expert and user understandings of chemical risks enabled us to identify knowledge gaps and misunderstandings and to reinforce appropriate sets of safety beliefs and behavior relevant to chemical risk communications. By designing safety information to be more relevant to the workplace context of users, we believe that employers and employees may gain improved knowledge about chemical hazards in the workplace, such that better chemical risk management, self-protection, and informed decision making develop over time.

  7. The Role of Some Retention Aids in Water Based Gravure Printing

    International Nuclear Information System (INIS)

    El-Sherbiny, S.; Morsy, F.A.; Abdel- Sayed, E.S.

    2005-01-01

    Several commercial retention systems employing either synthetic or natural additives are now able to achieve an acceptable level of filler retention even during high speed paper forming. However, despite their importance, there have been very few reports in the literature regarding the influence of different retention aids on gravure water based ink printability. In the current work, a series of uncoated hand sheets containing the retention aids rosin aids rosin-alum, cationic starch, polyacrylamide and chitosan were prepared under controlled ph conditions. Chitosan is a natural additive only very recently employed in commercial papermaking systems. After printing with two water based ink systems, both printability and print quality were then assessed in terms of print density, gloss and ink transfer. The effect of surfactant addition to gravure water based ink was also studied. The results showed that the amount of ink transferred and the print density both decreased as the percentage of the selected additives increased. The addition of chitosan to the paper furnish led to a substantial decrease in both the amount of ink transferred and the print density compared to the other additives. Conversely, the presence of surfactant in the printing ink enhanced the print density and also increased the amount of ink transferred. In addition, results obtained demonstrated that printing with water based ink greatly decreased the print gloss in comparison to the paper gloss. Increasing the addition level of the selected additives led to an increase of print gloss due to a decrease in the amount of ink transferred. Increasing the ph of the pulp suspension containing 1 % of the selected additives increased the print density in all cases, except when using cationic starch

  8. Use of high-molecular compounds in plastic lubricants for geological exploratory drilling

    Energy Technology Data Exchange (ETDEWEB)

    Smyk, Z.I.; Kuz' michev, S.P.; Mnishchenko, V.G.; Smertenko, M.I.

    1982-01-01

    The existing lubricants in the series KAVS (OST 81-4-70) do not correspond to the conditions of high-rotational diamond drilling for a number of operating properties. Results are presented of studying the hydrated calcium lubricants with high molecular additives (polyisobutylene KP-10, polyethylene of high density of low pressure and atactic propylene in a quantity of 1-6%) improving their operating properties. Selection of the additives is governed by their compatability with the base and the capacity to improve the adhesion-cohesion properties with relative constancy of other characteristics. As a result of the studies it was established that the use in the lubricant of polymers of the carbon-chain type of amorphous structure in a quantity of 1-2% depending on the molecular weight noticeably improves the stickiness, resistance to erosion by water, colloidal stability, and lubricant properties. When they are added in a large quantity, a sharp weakening of the lubricants is observed and in individual cases, formation of unstable systems. Polymers of the hetero-chain type because of the presence of polar groups are highly effective adhesives. Protective and packing lubricants are developed which contain rubbers. Alkyl-phenol-amine resins (octophor-N), the bottoms from the production of phenol formaldehyde resin, rosin and lignite wax introduced at the stage of cooling have a positive effect on the lubricant properties. The best operating properties with satisfactory other indicators (viscosity, colloidal stability, antiwear properties) are found in the samples containing polyisobutylene KP-10, lignite wax and rosin. Operating tests of an experimental batch of this lubricant under conditions of real drilling indicated that its use as compared to KEVS-45 makes it possible to increase the drilling rate by 40%, reduce the outlays of power to 50%, reduce the service time and the outlays of energy resources for applying the lubricant layer to the pipe surface.

  9. Size distributions of micro-bubbles generated by a pressurized dissolution method

    Science.gov (United States)

    Taya, C.; Maeda, Y.; Hosokawa, S.; Tomiyama, A.; Ito, Y.

    2012-03-01

    Size of micro-bubbles is widely distributed in the range of one to several hundreds micrometers and depends on generation methods, flow conditions and elapsed times after the bubble generation. Although a size distribution of micro-bubbles should be taken into account to improve accuracy in numerical simulations of flows with micro-bubbles, a variety of the size distribution makes it difficult to introduce the size distribution in the simulations. On the other hand, several models such as the Rosin-Rammler equation and the Nukiyama-Tanazawa equation have been proposed to represent the size distribution of particles or droplets. Applicability of these models to the size distribution of micro-bubbles has not been examined yet. In this study, we therefore measure size distribution of micro-bubbles generated by a pressurized dissolution method by using a phase Doppler anemometry (PDA), and investigate the applicability of the available models to the size distributions of micro-bubbles. Experimental apparatus consists of a pressurized tank in which air is dissolved in liquid under high pressure condition, a decompression nozzle in which micro-bubbles are generated due to pressure reduction, a rectangular duct and an upper tank. Experiments are conducted for several liquid volumetric fluxes in the decompression nozzle. Measurements are carried out at the downstream region of the decompression nozzle and in the upper tank. The experimental results indicate that (1) the Nukiyama-Tanasawa equation well represents the size distribution of micro-bubbles generated by the pressurized dissolution method, whereas the Rosin-Rammler equation fails in the representation, (2) the bubble size distribution of micro-bubbles can be evaluated by using the Nukiyama-Tanasawa equation without individual bubble diameters, when mean bubble diameter and skewness of the bubble distribution are given, and (3) an evaluation method of visibility based on the bubble size distribution and bubble

  10. Parental verbal abuse and the mediating role of self-criticism in adult internalizing disorders.

    Science.gov (United States)

    Sachs-Ericsson, Natalie; Verona, Edelyn; Joiner, Thomas; Preacher, Kristopher J

    2006-07-01

    Researchers (e.g., [Gibb, B.E., 2002. Childhood maltreatment and negative cognitive styles. A quantitative and qualitative review. Clinical Psychology Review, 22 (2), 223-246]; [Rose, D.T., Abramson, L.Y., 1992. Developmental predictors of depressive cognitive styles: developmental perspectives on depression. In Cicchetti, D., Toth, S.L. (Eds.), Developmental Perspectives on Depression. Rochester symposium on developmental psychopathology, vol. 4, pp. 323-349]) have proposed that when childhood abuse is verbal (rather than sexual or physical), the child is more likely to develop a negative self-schema because the negative self-cognitions are directly supplied to the child by the abuser (e.g., "you are stupid"). In a test of this theory in adult participants, and drawing on the National Comorbidity Survey (NCS) (N=5877), we investigate the mediating role of current levels of self-criticism on the relationship between retrospective reports of parental verbal abuse, as well as sexual and physical abuse, and adult internalizing symptoms. We found self-criticism, but not dependency traits, to fully mediate the relationship between childhood verbal abuse perpetrated by parents and internalizing (depression, anxiety) symptoms. On the other hand, self-criticism was only a partial mediator of the relationship between the other types of abuse and internalizing symptoms. The NCS data is cross-sectional, which limits any firm conclusions regarding causality. While these results are suggestive that self-criticism is a mediator of the relationship between abuse and internalizing symptoms, longitudinal data are necessary to help rule out alternative explanations. Results of this study suggest that childhood abuse experiences, and in particular verbal abuse, may confer risk for internalizing disorders in part because verbal abuse influences the development of a self-critical style.

  11. Development and Psychometric Evaluation of the Child Neglect Questionnaire.

    Science.gov (United States)

    Stewart, Chris; Kirisci, Levent; Long, Abigail L; Giancola, Peter R

    2015-11-01

    Neglect poses a significant risk for children throughout their development and is often linked with serious consequences that reach into adulthood. The Child Neglect Questionnaire (CNQ) fills existing gaps by incorporating multiple perspectives from both parents and the child, as well as measuring the complex phenomenon of neglect multidimensionally. Furthermore, this measure addresses the need for an instrument specifically developed for late childhood (ages 10-12), as much of the extant evidence and corresponding measures focus on young children and their mothers. A panel of three psychologists, using Cicchetti's model of child neglect as a theoretical guide, began by selecting items from an existing database. Results of exploratory and confirmatory factor analyses and item response theory demonstrated the unidimensionality of physical, emotional, educational, and supervision neglect as well as a second-order construct of child neglect. Analyses controlling for risk status due to father's substance use disorder, socioeconomic status, and child's ethnicity demonstrated that father's and mother's (parental) neglect, particularly in the child's versions, had sound concurrent and predictive validity. Concurrently, at age 10-12, the child's version of both parents' neglect correlated with their parenting behaviors evaluated by other available measures. Prospectively, from 10-12 years of age to 11-13 years of age, parental neglect predicted child's drug use frequency with coexisting psychological dysregulation, psychiatric symptoms, antisocial behavior, non-normative sexual behavior, involvement with deviant peers and leisure activities thus demonstrating sound predictive validity. Also, internal consistency and inter-rater reliability were excellent. The CNQ, particularly the child's version, may thus be useful for detecting children at high risk for parental neglect. © The Author(s) 2014.

  12. Comorbidities and continuities as ontogenic processes: Toward a developmental spectrum model of externalizing psychopathology

    Science.gov (United States)

    Beauchaine, Theodore P.; McNulty, Tiffany

    2014-01-01

    Research on child and adolescent mental health problems has burgeoned since the inaugural issue of Development and Psychopathology was published in 1989. In the quarter century since, static models of psychopathology have been abandoned in favor of transactional models, following the agenda set by editor Dante Cicchetti and other proponents of the discipline. The transactional approach, which has been applied to autism, depression, self-injury, and delinquency, (a) specifies vulnerabilities and risk factors across multiple levels of analysis spanning genes to cultures, (b) identifies multifinal and equifinal pathways to psychopathology, and (c) transcends traditional disciplinary boundaries. However, as noted by Rutter and Sroufe (2000), specific mechanisms of continuity, discontinuity, and comorbidity of psychopathology must be identified if we wish to understand etiology fully. In this article, we present a model of early-onset externalizing behavior in which comorbidities and continuities are viewed as ontogenic processes: products of complex longitudinal transactions between interdependent individual-level vulnerabilities (e.g., genetic, epigenetic, allostatic) and equally interdependent contextual risk factors (e.g., coercive parenting, deviant peer group affiliations, neighborhood criminality). Through interactions across levels of analysis, some individuals traverse along the externalizing spectrum, beginning with heritable trait impulsivity in preschool and ending in antisociality in adulthood. In describing our model, we note that (a) the approach outlined in the DSM to subtyping externalizing disorders continues to obscure developmental pathways to antisociality, (b) molecular genetics studies will likely not identify meaningful subtypes of externalizing disorder, and (c) ontogenic trait approaches to psychopathology are much more likely to advance the discipline in upcoming years. PMID:24342853

  13. Relation between paralinguistic skills and social skills in adults with mild and moderate intellectual disability

    Directory of Open Access Journals (Sweden)

    Đorđević Mirjana

    2016-01-01

    Full Text Available Facial expressions and prosodic acoustic characteristics jointly present paralinguistic features of communication. By analyzing literature, we observe that respondents with intellectual disabilities manifest emphasized difficulties in detecting emotions in tasks of facial and vocal expression. However, we do not know if there are data on how paralinguistic abilities correlate with social skills in adults with intellectual disabilities. This research was conducted in order to determine the relation between the ability of paralinguistic production and paralinguistic understanding, on one side, and social skills on the other side. The sample consisted of 44 adults of both genders with mild (N=22 and moderate intellectual disabilities (N=22, aged between 20 and 50 (M=32.41, SD=9.36. The Paralinguistic scale from the battery for the assessment of communication (The Assessment Battery for Communication, Abaco, Sacco et al., 2008 was used for the assessment of paralinguistic skills, and three subscales of Vineland adaptive behavior scale - teaching form (Sparrow, Cicchetti & Balla, 2006 were used for the assessment of social skills. The results show that the achievement on subscales of Playing and leisure time positively correlated with the ability to understand emotions in communication (r = 0.486, p < 0.05 in respondents with mild intellectual disability. Achievements on the subscales Skills of adapting had a moderate and positive correlation with the ability to understand emotions in communication (r=0.522, p<0.05 in subjects with mild intellectual disability. Statistically significant correlations between the examined variables were not observed in the group of respondents with moderate intellectual disability. We can conclude that in adults with mild intellectual disability the ability to understand emotional paralinguistic elements significantly correlates with the ability to organize social activities and to adapt behavior in social interactions.

  14. REPELLENCE OF NATURAL AND SYNTHETIC SUBSTANCES TO THE CONSUMING WILD MAMMALS OF Araucaria angustifolia (Bertol. Kuntze SEEDS AT FIELD SOWING

    Directory of Open Access Journals (Sweden)

    Guilherme O. S. Ferraz de Arruda

    2009-10-01

    Full Text Available This work aimed at testing some natural and synthetic substances, not phytotoxics and not lethal for the fauna, to verify the repellence action for the consuming wild animals of Parana-Pine seeds, in two direct sowing experiments in the field. In experiment I, there was the direct application of the treatments in the Parana-Pine seeds and, in the experiment II, there was the application of the treatments only in the surface of the plantation hollows, after the sowing of Parana-Pine seeds. The Parana-Pine seeds and the treatments were prepared at Laboratory of Center of Agroveterinary Sciences, University of Santa Catarina State, at Lages city, Brazil. The experiments were carried to a native-antropic field area at Lages city. It was adopted the experimental design of randomized blocks for both experiments. Experiment I was composed of 15 treatments, 10 seeds per treatment, with 4 replications, and experiment II was composed of 11 treatments, 10 seeds per treatment, with 4 replications. The tested substances, isolated or in mixtures, were: fruit of red pepper, root of parsley, stem and leaf of wormwood herb, lemon scented gum essential oil, linseed oil, castor bean oil, rosin, copper oxychloride, copper sulphate, sulphur, látex ink and calcium lignosulfonate. Through the periodic inspections, during 167 and 165 days respectively for the experiments I and II, data were collected and organized through the attacked and not attacked Paraná-Pine seeds, being submitted to statistical analysis later. The predation rates were considered high for both experiments: 86,7% in experiment I and 84,3% in experiment II. In the experiment with treated Parana-Pine seeds, the longer time for the beginning of the predation was 104 days after the sowing, while, in the experiment with treatment in the environment (hollows, it was 64 days after the sowing. Solution of rosin and alcohol + lemon scented gum oil, applied in the seeds, presented potential for reduction

  15. Repelência de substâncias naturais e sintéticas aos mamíferos silvestres consumidores de sementes de Araucaria angustifolia (Bertol. Kuntze em semeadura no campo.

    Directory of Open Access Journals (Sweden)

    Guilherme O. S. Ferraz de Arruda

    2008-01-01

    Full Text Available This work aimed at testing some natural and synthetic substances, not phytotoxics and not lethal for the fauna, to verify the repellence action for the consuming wild animals of Parana-Pine seeds, in two direct sowing experiments in the field. In experiment I, there was the direct application of the treatments in the Parana-Pine seeds and, in the experiment II, there was the application of the treatments only in the surface of the plantation hollows, after the sowing of Parana-Pine seeds. The Parana-Pine seeds and the treatments were prepared at Laboratory of Center of Agroveterinary Sciences, University of Santa Catarina State, at Lages city, Brazil. The experiments were carried to a native-antropic field area at Lages city. It was adopted the experimental design of randomized blocks for both experiments. Experiment I was composed of 15 treatments, 10 seeds per treatment, with 4 replications, and experiment II was composed of 11 treatments, 10 seeds per treatment, with 4 replications. The tested substances, isolated or in mixtures, were: fruit of red pepper, root of parsley, stem and leaf of wormwood herb, lemon scented gum essential oil, linseed oil, castor bean oil, rosin, copper oxychloride, copper sulphate, sulphur, látex ink and calcium lignosulfonate. Through the periodic inspections, during 167 and 165 days respectively for the experiments I and II, data were collected and organized through the attacked and not attacked Paraná-Pine seeds, being submitted to statistical analysis later. The predation rates were considered high for both experiments: 86,7% in experiment I and 84,3% in experiment II. In the experiment with treated Parana-Pine seeds, the longer time for the beginning of the predation was 104 days after the sowing, while, in the experiment with treatment in the environment (hollows, it was 64 days after the sowing. Solution of rosin and alcohol + lemon scented gum oil, applied in the seeds, presented potential for reduction

  16. Sustainable Elastomers from Renewable Biomass.

    Science.gov (United States)

    Wang, Zhongkai; Yuan, Liang; Tang, Chuanbing

    2017-07-18

    Sustainable elastomers have undergone explosive growth in recent years, partly due to the resurgence of biobased materials prepared from renewable natural resources. However, mounting challenges still prevail: How can the chemical compositions and macromolecular architectures of sustainable polymers be controlled and broadened? How can their processability and recyclability be enabled? How can they compete with petroleum-based counterparts in both cost and performance? Molecular-biomass-derived polymers, such as polymyrcene, polymenthide, and poly(ε-decalactone), have been employed for constructing thermoplastic elastomers (TPEs). Plant oils are widely used for fabricating thermoset elastomers. We use abundant biomass, such as plant oils, cellulose, rosin acids, and lignin, to develop elastomers covering a wide range of structure-property relationships in the hope of delivering better performance. In this Account, recent progress in preparing monomers and TPEs from biomass is first reviewed. ABA triblock copolymer TPEs were obtained with a soft middle block containing a soybean-oil-based monomer and hard outer blocks containing styrene. In addition, a combination of biobased monomers from rosin acids and soybean oil was formulated to prepare triblock copolymer TPEs. Together with the above-mentioned approaches based on block copolymers, multigraft copolymers with a soft backbone and rigid side chains are recognized as the first-generation and second-generation TPEs, respectively. It has been recently demonstrated that multigraft copolymers with a rigid backbone and elastic side chains can also be used as a novel architecture of TPEs. Natural polymers, such as cellulose and lignin, are utilized as a stiff, macromolecular backbone. Cellulose/lignin graft copolymers with side chains containing a copolymer of methyl methacrylate and butyl acrylate exhibited excellent elastic properties. Cellulose graft copolymers with biomass-derived polymers as side chains were

  17. Treatment of chronic periodontitis and its impact on mastication.

    Science.gov (United States)

    Pereira, Luciano J; Gazolla, Cátia M; Magalhães, Isabela B; Ramos-Jorge, Maria Letícia; Marques, Leandro S; Gameiro, Gustavo H; Fonseca, Douglas C; Castelo, Paula M

    2011-02-01

    The aim of the present study is to assess the impact of conventional periodontal treatment of chronic periodontitis on the perception of mastication. The patients (n = 28; age range: 23 to 56 years, mean age: 37.9 years) were evaluated on two occasions (before and after treatment) with a 45-day interval using the Oral Impact on Daily Performance questionnaire. An electromyography system was used for the determination of activity in muscles of mastication and bite force. Masticatory performance was assessed using a test material. The median particle size of the masticated material was determined using a sieve method and the Rosin-Rammler equation. The clinical criteria were the number of teeth and probing depth, both determined by a single calibrated observer masked to the treatment phase. The data were analyzed in the pretreatment and post-treatment periods using Wilcoxon test; Spearman correlation coefficient; and two multiple linear regression models (backward stepwise procedure). There was a significant negative correlation between the number of teeth (number of mastication units) and difficulty eating (P mastication diminished after periodontal treatment. The number of teeth had considerable importance in the perception of impact on mastication in the sample studied.

  18. Evaluation on the characteristics of tin-silver-bismuth solder

    Science.gov (United States)

    Xia, Z.; Shi, Y.; Chen, Z.

    2002-02-01

    Tin-silver-bismuth solder is characterized by its lower melting point, good wetting behavior, and good mechanical property for which it is expected to be a new lead-free solder to replace tin-lead solder. In this article, Sn-3.33Ag-4.83Bi solder was investigated concerning its physical, spreading, and mechanical properties under specific conditions. Cooling curves and DSC results showed that it was close to eutectic composition (m.p. 210° 212 °C). Coefficiency of thermal expansion (CTE) of this solder, between that of PCBs and copper substrates, was beneficial to alleviate the thermal mismatch of the substrates. It was also a good electrical and thermal conductor. Using a rosin-based, mildly activated (RMA) flux, a spreading test indicated that SnAgBi solder paste had good solderability. Meanwhile, the solder had high tensile strength and fracture energy. Its fracture mechanism was a mixture of ductile and brittle fracture morphology. The metallographic and EDAX analyses indicated that it was composed of a tin-based solid solution and some intermetallic compound (IMC) that could strengthen the substrate. However, these large needle-like IMCs would cut the substrate and this resulted in the decreasing of the toughness of the solder.

  19. Evaluation of certain food additives and contaminants. Eightieth report of the Joint FAO/WHO Expert Committee on Food Additives.

    Science.gov (United States)

    2016-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and contaminants and to prepare specifications for identity and purity. The first part of the report contains a brief description of general considerations addressed at the meeting, including updates on matters of interest to the work of the Committee. A summary follows of the Committee's evaluations of technical, toxicological and/or dietary exposure data for seven food additives (benzoates; lipase from Fusarium heterosporum expressed in Ogataea polymorpha; magnesium stearate; maltotetraohydrolase from Pseudomonas stutzeri expressed in Bacillus licheniformis; mixed β-glucanase, cellulase and xylanase from Rasamsonia emersonii; mixed β-glucanase and xylanase from Disporotrichum dimorphosporum; polyvinyl alcohol (PVA)- polyethylene glycol (PEG) graft copolymer) and two groups of contaminants (non-dioxin-like polychlorinated biphenyls and pyrrolizidine alkaloids). Specifications for the following food additives were revised or withdrawn: advantame; annatto extracts (solavnt extracted bixin, ad solvent-extracted norbixin); food additives containing aluminium and/or silicon (aluminium silicate; calcium aluminium silicate; calcium silicate; silicon dioxide, amorphous; sodium aluminium silicate); and glycerol ester of gum rosin. Annexed to the report are tables or text summarizing the toxicological and dietary exposure information and information on specifications as well as the Committees recommendations on the food additives and contaminants considered at this meeting.

  20. Inverse estimation of the spheroidal particle size distribution using Ant Colony Optimization algorithms in multispectral extinction technique

    Science.gov (United States)

    He, Zhenzong; Qi, Hong; Wang, Yuqing; Ruan, Liming

    2014-10-01

    Four improved Ant Colony Optimization (ACO) algorithms, i.e. the probability density function based ACO (PDF-ACO) algorithm, the Region ACO (RACO) algorithm, Stochastic ACO (SACO) algorithm and Homogeneous ACO (HACO) algorithm, are employed to estimate the particle size distribution (PSD) of the spheroidal particles. The direct problems are solved by the extended Anomalous Diffraction Approximation (ADA) and the Lambert-Beer law. Three commonly used monomodal distribution functions i.e. the Rosin-Rammer (R-R) distribution function, the normal (N-N) distribution function, and the logarithmic normal (L-N) distribution function are estimated under dependent model. The influence of random measurement errors on the inverse results is also investigated. All the results reveal that the PDF-ACO algorithm is more accurate than the other three ACO algorithms and can be used as an effective technique to investigate the PSD of the spheroidal particles. Furthermore, the Johnson's SB (J-SB) function and the modified beta (M-β) function are employed as the general distribution functions to retrieve the PSD of spheroidal particles using PDF-ACO algorithm. The investigation shows a reasonable agreement between the original distribution function and the general distribution function when only considering the variety of the length of the rotational semi-axis.

  1. Chemical profiling and adulteration screening of Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation infrared (2D-IR) spectroscopy

    Science.gov (United States)

    Qu, Lei; Chen, Jian-bo; Zhang, Gui-Jun; Sun, Su-qin; Zheng, Jing

    2017-03-01

    As a kind of expensive perfume and valuable herb, Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy is employed to establish a simple and quick method for the adulteration screening of ALR. First, the principal chemical constituents of ALR are characterized by FT-IR spectroscopy at room temperature and two-dimensional correlation infrared (2D-IR) spectroscopy with thermal perturbation. Besides the common cellulose and lignin compounds, a certain amount of resin is the characteristic constituent of ALR. Synchronous and asynchronous 2D-IR spectra indicate that the resin (an unstable secondary metabolite) is more sensitive than cellulose and lignin (stable structural constituents) to the thermal perturbation. Using a certified ALR sample as the reference, the infrared spectral correlation threshold is determined by 30 authentic samples and 6 adulterated samples. The spectral correlation coefficient of an authentic ALR sample to the standard reference should be not less than 0.9886 (p = 0.01). Three commercial adulterated ALR samples are identified by the correlation threshold. Further interpretation of the infrared spectra of the adulterated samples indicates the common adulterating methods - counterfeiting with other kind of wood, adding ingredient such as sand to increase the weight, and adding the cheap resin such as rosin to increase the content of resin compounds. Results of this research prove that FT-IR spectroscopy can be used as a simple and accurate quality control method of ALR.

  2. ELEKTROMAGNĒTISKI IETEKMĒTU HIDRODINAMISKO PROCESU EKSPERIMENTĀLI PĒTĪJUMI ŠĶIDRU METĀLU NOSLĒGTOS TILPUMOS

    OpenAIRE

    Andris Bojarevičs

    2014-01-01

    ANOTĀCIJA Promocijas darbs veidots kā paplašināts kopsavilkums par 18 zinātnisku publikāciju kopu, kas veltīta šķidru metālu kustības dinamikai noslēgtos tilpumos apstākļos, kad to ietekmē ārēji uzlikts magnētiskais lauks, kā pastāvīgs, tā arī laikā mainīgs. Praktiski visi darbi ir autora plānotu un realizētu fizikālu eksperimentālu modeļu izpētes izklāsts, kas iekļaujas magnētiskās hidrodinamikas jomā. Darbā atspoguļoti eksperimentālie rezultāti par dažādu ārēji rosinātu faktoru veidotu ...

  3. Experimental and theoretical investigation of droplet dispersion in venturi scrubbers with axial liquid injection

    Energy Technology Data Exchange (ETDEWEB)

    Mokhtarian, N.; Talaei, A.; Karimikhosroabadi, M. [Islamic Azad University, Shahreza Branch, Shahreza (Iran); Sadeghi, F. [Chemical Engineering Department, University of Isfahan, Isfahan (Iran); Talaie, M.R.

    2009-05-15

    Droplet dispersion in a Venturi scrubber with axial liquid injection was investigated both experimentally and theoretically. The main objective of this study was to develop a mathematical model to predict droplet dispersion in a Venturi scrubber with axial liquid injection. The effects of the Peclet number and droplet size distribution on droplet dispersion were studied using the developed model. Sampling of the droplets was carried out, isokinetically, in 16 positions at the end of the throat section. The experimental data were used to find the parameters of the developed model, such as the Peclet number. From the results of this study, it was found that the Peclet number was not constant across the cross section of the scrubber channel. In order to achieve a better agreement between the results of the model and the experimental data, it was required to consider Peclet number variations across the Venturi channel. It was also revealed that the parameter representing the width of the Rosin-Rammler distribution of droplet size could not be considered constant and it was influenced significantly by the operating parameters such as liquid flow rate and gas velocity. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  4. Synthesis and characterization of grinding aid fly ash blended mortar effect on bond strength of masonry prisms

    Science.gov (United States)

    Krishnaraj, L.; Ravichandran, P. T.; Sagadevan, Suresh

    2018-04-01

    The aim of the present work is to study the effect of particle size reduction by applying top-down nanotechnology such as ball mill grinding process with the addition of amine-based grinding aids. The particle size reduction in synthesis process and its characterization were investigated for fly ash particles. The Rosin-Rammler-Bennet (RRB) distribution model using mathematical formulations were studied for fly ash ground particles. The hardened properties of grinding aid fly ash composite mortar were studied using compressive strength test. The optimum grinding time was 120 min identified through the particle size distribution analysis. The mean particle size decreased from 92.09 μm to 10.5 μm in which there is 89% reduction in particle size due to the grinding of fly ash particle with grinding aids. The compressive strength results show that substitutions of Ordinary Portland Cement (OPC) mortar by Amine-based Grinding aid Fly Ash (AGFA) 15% gives 12, 23% and at 30% gives 6, 8% of higher strength compare to the substitutions of raw fly ash. The addition of grinding aids in grinding process gives more advantages to reduce the particle size without changing chemical composition. The AGFA sample shows better performance in compressive strength and bond strength behavior of masonry prism. It may suggest that amine based grinding aids play a vital role and feasible to use in fly ash grinding process.

  5. Fissure formation in coke. 3: Coke size distribution and statistical analysis

    Energy Technology Data Exchange (ETDEWEB)

    D.R. Jenkins; D.E. Shaw; M.R. Mahoney [CSIRO, North Ryde, NSW (Australia). Mathematical and Information Sciences

    2010-07-15

    A model of coke stabilization, based on a fundamental model of fissuring during carbonisation is used to demonstrate the applicability of the fissuring model to actual coke size distributions. The results indicate that the degree of stabilization is important in determining the size distribution. A modified form of the Weibull distribution is shown to provide a better representation of the whole coke size distribution compared to the Rosin-Rammler distribution, which is generally only fitted to the lump coke. A statistical analysis of a large number of experiments in a pilot scale coke oven shows reasonably good prediction of the coke mean size, based on parameters related to blend rank, amount of low rank coal, fluidity and ash. However, the prediction of measures of the spread of the size distribution is more problematic. The fissuring model, the size distribution representation and the statistical analysis together provide a comprehensive capability for understanding and predicting the mean size and distribution of coke lumps produced during carbonisation. 12 refs., 16 figs., 4 tabs.

  6. Phylogeny of kemenyan (Styrax sp.) from North Sumatra based on morphological characters

    Science.gov (United States)

    Susilowati, A.; Kholibrina, C. R.; Rachmat, H. H.; Munthe, M. A.

    2018-02-01

    Kemenyan is the most famous local tree species from North Sumatra. Kemenyan is known as rosin producer that very valuable for pharmacheutical, cosmetic, food preservatives and vernis. Based on its history, there were only two species of kemenyan those were kemenyan durame and toba, but in its the natural distribution we also found others species showing different characteristics with previously known ones. The objectives of this research were:The objectives of this research were: (1). To determine the morphological diversity of kemenyan in North Sumatra and (2). To determine phylogeny clustering based on the morphological characters. Data was collected from direct observation and morphological characterization, based on purposive sampling technique to those samples trees atPakpak Bharat, North Sumatra. Morphological characters were examined using descriptive analysis, phenotypic variability using standard deviation, and cluster analysis. The result showed that there was a difference between 4 species kemenyen (batak, minyak, durame and toba) according to 75 observed characters including flower, fruits, leaf, stem, bark, crown type, wood and the resin. Analysis and both quantitative and qualitative characters kemenyan clustered into two groups. In which, kemenyan toba separated with other clusters.

  7. Lambda-Cyhalothrin Nanosuspension Prepared by the Melt Emulsification-High Pressure Homogenization Method

    Directory of Open Access Journals (Sweden)

    Zhenzhong Pan

    2015-01-01

    Full Text Available The nanosuspension of 5% lambda-cyhalothrin with 0.2% surfactants was prepared by the melt emulsification-high pressure homogenization method. The surfactants composition, content, and homogenization process were optimized. The anionic surfactant (1-dodecanesulfonic acid sodium salt and polymeric surfactant (maleic rosin-polyoxypropylene-polyoxyethylene ether sulfonate screened from 12 types of commercially common-used surfactants were used to prepare lambda-cyhalothrin nanosuspension with high dispersity and stability. The mean particle size and polydispersity index of the nanosuspension were 16.01 ± 0.11 nm and 0.266 ± 0.002, respectively. The high zeta potential value of −41.7 ± 1.3 mV and stable crystalline state of the nanoparticles indicated the excellent physical and chemical stability. The method could be widely used for preparing nanosuspension of various pesticides with melting points below boiling point of water. This formulation may avoid the use of organic solvents and reduce surfactants and is perspective for improving bioavailability and reducing residual pollution of pesticide in agricultural products and environment.

  8. Design and characterization of a cough simulator.

    Science.gov (United States)

    Zhang, Bo; Zhu, Chao; Ji, Zhiming; Lin, Chao-Hsin

    2017-02-23

    Expiratory droplets from human coughing have always been considered as potential carriers of pathogens, responsible for respiratory infectious disease transmission. To study the transmission of disease by human coughing, a transient repeatable cough simulator has been designed and built. Cough droplets are generated by different mechanisms, such as the breaking of mucus, condensation and high-speed atomization from different depths of the respiratory tract. These mechanisms in coughing produce droplets of different sizes, represented by a bimodal distribution of 'fine' and 'coarse' droplets. A cough simulator is hence designed to generate transient sprays with such bimodal characteristics. It consists of a pressurized gas tank, a nebulizer and an ejector, connected in series, which are controlled by computerized solenoid valves. The bimodal droplet size distribution is characterized for the coarse droplets and fine droplets, by fibrous collection and laser diffraction, respectively. The measured size distributions of coarse and fine droplets are reasonably represented by the Rosin-Rammler and log-normal distributions in probability density function, which leads to a bimodal distribution. To assess the hydrodynamic consequences of coughing including droplet vaporization and polydispersion, a Lagrangian model of droplet trajectories is established, with its ambient flow field predetermined from a computational fluid dynamics simulation.

  9. Synchronized droplet size measurements for Coal-Water-Slurry (CWS) diesel sprays of an electronically-controlled fuel injection system

    Science.gov (United States)

    Kihm, K. D.; Terracina, D. P.; Payne, S. E.; Caton, J. A.

    Experiments were completed to study intermittent coal-water slurry (CWS) fuel sprays injected from an electronically-controlled accumulator injector system. A laser diffraction particle analyzing (LDPA) technique was used to measure the spray diameters (Sauter mean diameter, SMD) assuming the Rosin-Rammler two parameter model. In order to ensure an accurate synchronization of the measurement with the intermittent sprays, a new synchronization technique was developed using the light extinction signal as a triggering source for the data taking initiation. This technique allowed measurement of SMD's near the spray tip where the light extinction was low and the data were free from the multiscattering bias. Coal-water slurry fuel with 50% coal loading in mass containing 5 (mu)m mass median diameter coal particulates was considered. Injection pressures ranging from 28 to 110 MPa, two different nozzle orifice diameters, 0.2 ad 0.4 mm, and four axial measurement locations from 60 to 120 mm from the nozzle orifice were studied. Measurements were made for pressurized (2.0 MPa in gauge) and for ambient chamber conditions. The spray SMD showed an increase with the distance of the axial measurement location and with the ambient gas density, and showed a decrease with increasing injection pressure. A correlation of the Sauter mean diameter with the injection conditions was determined. The results were also compared with previous SMD correlations that were available only for diesel fuel sprays.

  10. An operational calculus framework to characterize droplet size populations from turbulent breakup by a small number of parameters

    International Nuclear Information System (INIS)

    Vazquez, Rafael; Ganan-Calvo, Alfonso M

    2010-01-01

    A systematic operational calculus framework that characterizes droplet/bubble size distributions resulting from turbulent breakup of an immiscible fluid into a carrier one is presented. The proposed formulation is derived from dynamical arguments; a finite-difference formulation of the integro-differential continuous coagulation and fragmentation equation is shown to exhibit the same structure as a discrete sequence of Mellin convolutions between the probability distribution of the evolving dispersed phase and a generic kernel. This kernel may have its physical correspondence with the probability distribution resulting from a single breakup event, e.g. a liquid ligament breakup in a ligament-mediated spray formation. The number of convolution steps in the sequence can be reduced to a single parameter. As an illustration, this procedure is applied to the exponential and the gamma distributions, obtaining as a result the Frechet distribution earlier used by Rosin and Rammler (1934 Kolloid-Zeitschrift 67 16-26), and by Nukiyama and Tanasawa (1939 Trans. Soc. Mech. Eng. Japan 5 62-7). Thus, the framework introduced in this work provides a physical foundation for the success of the Frechet distribution in accurately fitting experimentally measured droplet size distributions in sprays and emulsions.

  11. Change detection algorithms for surveillance in visual iot: a comparative study

    International Nuclear Information System (INIS)

    Akram, B.A.; Zafar, A.; Akbar, A.H.; Chaudhry, A.

    2018-01-01

    The VIoT (Visual Internet of Things) connects virtual information world with real world objects using sensors and pervasive computing. For video surveillance in VIoT, ChD (Change Detection) is a critical component. ChD algorithms identify regions of change in multiple images of the same scene recorded at different time intervals for video surveillance. This paper presents performance comparison of histogram thresholding and classification ChD algorithms using quantitative measures for video surveillance in VIoT based on salient features of datasets. The thresholding algorithms Otsu, Kapur, Rosin and classification methods k-means, EM (Expectation Maximization) were simulated in MATLAB using diverse datasets. For performance evaluation, the quantitative measures used include OSR (Overall Success Rate), YC (Yule’s Coefficient) and JC (Jaccard’s Coefficient), execution time and memory consumption. Experimental results showed that Kapur’s algorithm performed better for both indoor and outdoor environments with illumination changes, shadowing and medium to fast moving objects. However, it reflected degraded performance for small object size with minor changes. Otsu algorithm showed better results for indoor environments with slow to medium changes and nomadic object mobility. k-means showed good results in indoor environment with small object size producing slow change, no shadowing and scarce illumination changes. (author)

  12. Inversion of particle size distribution by spectral extinction technique using the attractive and repulsive particle swarm optimization algorithm

    Directory of Open Access Journals (Sweden)

    Qi Hong

    2015-01-01

    Full Text Available The particle size distribution (PSD plays an important role in environmental pollution detection and human health protection, such as fog, haze and soot. In this study, the Attractive and Repulsive Particle Swarm Optimization (ARPSO algorithm and the basic PSO were applied to retrieve the PSD. The spectral extinction technique coupled with the Anomalous Diffraction Approximation (ADA and the Lambert-Beer Law were employed to investigate the retrieval of the PSD. Three commonly used monomodal PSDs, i.e. the Rosin-Rammer (R-R distribution, the normal (N-N distribution, the logarithmic normal (L-N distribution were studied in the dependent model. Then, an optimal wavelengths selection algorithm was proposed. To study the accuracy and robustness of the inverse results, some characteristic parameters were employed. The research revealed that the ARPSO showed more accurate and faster convergence rate than the basic PSO, even with random measurement error. Moreover, the investigation also demonstrated that the inverse results of four incident laser wavelengths showed more accurate and robust than those of two wavelengths. The research also found that if increasing the interval of the selected incident laser wavelengths, inverse results would show more accurate, even in the presence of random error.

  13. Environmental friendly crush-magnetic separation technology for recycling metal-plated plastics from end-of-life vehicles.

    Science.gov (United States)

    Xue, Mianqiang; Li, Jia; Xu, Zhenming

    2012-03-06

    Metal-plated plastics (MPP), which are important from the standpoint of aesthetics or even performance, are increasingly employed in a wide variety of situations in the automotive industry. Serious environmental problems will be caused if they are not treated appropriately. Therefore, recycling of MPP is an important subject not only for resource recycling but also for environmental protection. This work represents a novel attempt to deal with the MPP. A self-designed hammer crusher was used to liberate coatings from the plastic substrate. The size distribution of particles was analyzed and described by the Rosin-Rammler function model. The optimum retaining time of materials in the crusher is 3 min. By this time, the liberation rate of the materials can reach 87.3%. When the density of the suspension is 31,250 g/m(3), the performance of liberation is the best. Two-step magnetic separation was adopted to avoid excessive crushing and to guarantee the quality of products. Concerning both the separation efficiency and grade of products, the optimum rotational speed of the magnetic separator is 50-70 rpm. On the basis of the above studies about the liberating and separating behavior of the materials, a continuous recycling system (the technology of crush-magnetic separation) is developed. This recycling system provides a feasible method for recycling MPP efficiently, economically, and environmentally.

  14. An operational calculus framework to characterize droplet size populations from turbulent breakup by a small number of parameters

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, Rafael; Ganan-Calvo, Alfonso M, E-mail: amgc@us.e [Departamento de IngenierIa Aeroespacial y Mecanica de Fluidos, Universidad de Sevilla, e-41092 Sevilla (Spain)

    2010-05-07

    A systematic operational calculus framework that characterizes droplet/bubble size distributions resulting from turbulent breakup of an immiscible fluid into a carrier one is presented. The proposed formulation is derived from dynamical arguments; a finite-difference formulation of the integro-differential continuous coagulation and fragmentation equation is shown to exhibit the same structure as a discrete sequence of Mellin convolutions between the probability distribution of the evolving dispersed phase and a generic kernel. This kernel may have its physical correspondence with the probability distribution resulting from a single breakup event, e.g. a liquid ligament breakup in a ligament-mediated spray formation. The number of convolution steps in the sequence can be reduced to a single parameter. As an illustration, this procedure is applied to the exponential and the gamma distributions, obtaining as a result the Frechet distribution earlier used by Rosin and Rammler (1934 Kolloid-Zeitschrift 67 16-26), and by Nukiyama and Tanasawa (1939 Trans. Soc. Mech. Eng. Japan 5 62-7). Thus, the framework introduced in this work provides a physical foundation for the success of the Frechet distribution in accurately fitting experimentally measured droplet size distributions in sprays and emulsions.

  15. High-dose rate iridium-192 brachytherapy with flexible applicator. A trial toward decrease of stress during treatment and improvement of quality of life

    International Nuclear Information System (INIS)

    Inoue, Keiji; Kasahara, Kotaro; Karashima, Takashi; Inoue, Yuichiro; Kariya, Shinji; Inomata, Taisuke; Yoshida, Shoji; Shuin, Taro

    2001-01-01

    We tried to improve the materials and methods of high-dose rate Iridium-192 brachytherapy for localized prostate cancer and evaluated the stress during the treatment in 20 patients with whom the therapy was performed. Rigid applicators made of stainless steel of 1.6 mm in diameter were indwelt with a template as usual for 30 hours in 14 patients (group A). Flexible applicators made of polyoxymethylene rosin (POM) of 2.0 mm in diameter were indwelt without a template for 30 hours after the applicator insertion in 6 patients (group B). We made inquiries about lumbago, inconvenience and necessity of assistant help and sleep in the course of therapy, and urinary incontinence and erectile function after the course of therapy as the QOL. The stress during the course of therapy in the patients of group B was obviously less than that of group A. There were no significant differences in urinary incontinence and erectile function after the course of therapy between group A and B. In this study, our trial successfully reduced the stress during the course of therapy in the patients with localized prostate cancer in the course of high-dose rate Iridium-192 brachytherapy. (author)

  16. High-dose rate iridium-192 brachytherapy with flexible applicator. A trial toward decrease of stress during treatment and improvement of quality of life

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Keiji; Kasahara, Kotaro; Karashima, Takashi; Inoue, Yuichiro; Kariya, Shinji; Inomata, Taisuke; Yoshida, Shoji; Shuin, Taro [Kochi Medical School, Nankoku (Japan)

    2001-07-01

    We tried to improve the materials and methods of high-dose rate Iridium-192 brachytherapy for localized prostate cancer and evaluated the stress during the treatment in 20 patients with whom the therapy was performed. Rigid applicators made of stainless steel of 1.6 mm in diameter were indwelt with a template as usual for 30 hours in 14 patients (group A). Flexible applicators made of polyoxymethylene rosin (POM) of 2.0 mm in diameter were indwelt without a template for 30 hours after the applicator insertion in 6 patients (group B). We made inquiries about lumbago, inconvenience and necessity of assistant help and sleep in the course of therapy, and urinary incontinence and erectile function after the course of therapy as the QOL. The stress during the course of therapy in the patients of group B was obviously less than that of group A. There were no significant differences in urinary incontinence and erectile function after the course of therapy between group A and B. In this study, our trial successfully reduced the stress during the course of therapy in the patients with localized prostate cancer in the course of high-dose rate Iridium-192 brachytherapy. (author)

  17. Change Detection Algorithms for Surveillance in Visual IoT: A Comparative Study

    Science.gov (United States)

    Akram, Beenish Ayesha; Zafar, Amna; Akbar, Ali Hammad; Wajid, Bilal; Chaudhry, Shafique Ahmad

    2018-01-01

    The VIoT (Visual Internet of Things) connects virtual information world with real world objects using sensors and pervasive computing. For video surveillance in VIoT, ChD (Change Detection) is a critical component. ChD algorithms identify regions of change in multiple images of the same scene recorded at different time intervals for video surveillance. This paper presents performance comparison of histogram thresholding and classification ChD algorithms using quantitative measures for video surveillance in VIoT based on salient features of datasets. The thresholding algorithms Otsu, Kapur, Rosin and classification methods k-means, EM (Expectation Maximization) were simulated in MATLAB using diverse datasets. For performance evaluation, the quantitative measures used include OSR (Overall Success Rate), YC (Yule's Coefficient) and JC (Jaccard's Coefficient), execution time and memory consumption. Experimental results showed that Kapur's algorithm performed better for both indoor and outdoor environments with illumination changes, shadowing and medium to fast moving objects. However, it reflected degraded performance for small object size with minor changes. Otsu algorithm showed better results for indoor environments with slow to medium changes and nomadic object mobility. k-means showed good results in indoor environment with small object size producing slow change, no shadowing and scarce illumination changes.

  18. PENENTUAN KOMPOSISI OPTIMUM BUBURAN KERTAS KRAFT LINER 150 GSM MENGGUNAKAN METODE MIXTURE EXPERIMENT (Studi kasus: Pabrik Pulp & Paper PT.Z

    Directory of Open Access Journals (Sweden)

    Johnson Saragih

    2015-11-01

    Full Text Available Tujuan dari penelitian ini adalah bagaimana caranya memilih komposisi dari campuran buburan kertas sehingga posisi optimum dapat tercapai, dengan tercapainya komposisi optimum tersebut diharapkan dapat  meningkatkan kualitas kertas yang diproduksi.Adapun komposisi buburan kertas yang ingin dicapai adalah  konsistensi sebesar untuk campuran ,pada campuran satu, tingkat freeness sebesar pada campuran dua dan tingkat internal bonding sebesar   pada campuran tiga. Percobaan dilakukan dengan metoda mixture experiment untuk sampel percobaan buburan kertas sebanyak 500 gr. Titik percobaan dibangkitkan dengan software minitab sebanyak 14 titik percobaan.Adapun komposisi campuran yang optimal diperoleh untuk total campuran diperoleh sebesar 71.23 % ( 356.15 gr Waste Paper, 8.72% (43.55gr Pulp (NUKP, 3.54% (17.7 gr Air, 5.7%(28.5 gr Rosin, 3.29 % (16.4 gr Aluminium Sulfat ( Al2(SO43, dan 7.55 %(37.75gr Starch. Dengan komposisi tersebut akan dihasilkan produk yang memenuhi spesifikasi yang telah ditetapkan perusahaan. Berdasarkan pengukuran kapabilitas proses  campuran satu, pada kertas kraft liner 150 gsm di perusahaan  untuk tingkat konsistensi, adalah sebesar 0.47 dan setelah dilakukan percobaan yang optimal, berubah menjadi 1.11 berarti  terdapat peningkatan sebesar 136.7 %.Pada campuran dua untuk tingkat freeness adalah 0.45 berubah menjadi 1.14 berarti meningkat sebesar 153.3 %, sedangkan pada campuran tiga untuk tingkat internal bonding dari 0.55 berubah menjadi 1.15 berarti meningkat sebesar 109 %. Kata kunci: mixture experiment; konsistensi; freeness; internal bonding Abstract The aim of the research are how to choose composition from pulp paper mix, so that optimum position can be achieved, with the achievement of optimum composition, it can be expected to increase quality of paper production.While the pulp paper composition to achieve are consistency as big as for mixing on first mix, freeness level as big as on second mix and internal

  19. Integration of environmentally compatible soldering technologies for waste minimization

    International Nuclear Information System (INIS)

    Hosking, F.M.

    1992-01-01

    There has been a concentrated effort throughout the international microelectronics industry to phase out chlorofluorocarbon (CFC) materials and alleviate the serious problem of ozone depletion created by the release of CFCS. The development of more environmentally compatible manufacturing technologies is the cornerstone of this effort. Alternative materials and processes for cleaning and soldering have received special attention. Electronic. soldering typically utilizes rosin-based fluxes to promote solder wettability. Flux residues must be removed from the soldered parts when high product reliability is essential. Halogenated or CFC solvents have been the principle chemicals used to clean the residues. With the accelerated push to eliminate CFCs in the US by 1995, CFC-free solvents, aqueous-based cleaning, water soluble or ''no clean'' fluxes, and fluxless soldering technologies are being developed and quickly integrated into manufacturing practice. Sandia's Center for Solder Science and Technology has been ch g a variety of fluxless and alternative soldering technologies for DOE's waste minimization program. The work has focused on controlled atmosphere, laser, and ultrasonic fluxless soldering, protective metallic and organic coatings, and fluxes which have water soluble or low solids-based chemistries. With the increasing concern that Pb will also be banned from electronic soldering, Sandia has been characterizing the wetting, aging, and mechanical properties of Pb-fire solder alloys. The progress of these integrated studies will be discussed. Their impact on environmentally compatible manufacturing will be emphasized. Since there is no universal solution to the various environmental, safety, and health issues which currently face industry, the proposed technologies offer several complementary materials and processing options from which one can choose

  20. Molecularly imprinted electrochemical sensor based on nickel nanoparticle-modified electrodes for phenobarbital determination

    International Nuclear Information System (INIS)

    Yu, Hui Cheng; Huang, Xue Yi; Lei, Fu Hou; Tan, Xue Cai; Wei, Yi Chun; Li, Hao

    2014-01-01

    Highlights: • Uniform Ni nanoparticles were synthesized. • A Ni nanoparticle-modified imprinted sensor was developed to detect phenobarbital. • The modified sensor exhibited high sensitivity for phenobarbital. • The electrochemical properties of the modified sensor were investigated. • The prepared sensor was applied to detect phenobarbital in fish samples. - Abstract: Uniform nickel nanoparticles were applied to improve the sensitivity of sensors for phenobarbital (PB) determination. A Ni nanoparticle-modified imprinted electrochemical sensor was developed by thermal polymerization with the use of methacrylic acid as the functional monomer and ethylene glycol maleic rosinate acrylate as the crosslinking agent. The chemical structures and morphologies of the imprinted films were characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. The success of the fabrication of Ni nanoparticles, as well as the Ni nanoparticle-modified imprinted electrochemical sensor, was confirmed by the analytical results. The electrochemical properties of the modified molecularly imprinted and non-imprinted polymer sensors were investigated by cyclic voltammetry, differential pulse voltammetry, electrochemical impedance spectroscopy, and chronoamperometry. Results showed that the electrochemical properties of the molecularly imprinted sensor were remarkably different from those of the non-imprinted sensor. Linear responses of the imprinted sensor to PB were observed for concentrations ranging from 1.4 × 10 −7 mol L −1 to 1.3 × 10 −4 mol L −1 (r 2 = 0.9976), with a detection limit of 8.2 × 10 −9 mol L −1 (S/N = 3). The imprinted electrochemical sensor was used to determine PB in actual fish samples, in which average recoveries between 95.60% and 104.67% were achieved. The developed Ni nanoparticle-modified electrochemical sensor exhibited high sensitivity, high selectivity, and good recovery

  1. Robust vehicle detection in aerial images based on salient region selection and superpixel classification

    Science.gov (United States)

    Sahli, Samir; Duval, Pierre-Luc; Sheng, Yunlong; Lavigne, Daniel A.

    2011-05-01

    For detecting vehicles in large scale aerial images we first used a non-parametric method proposed recently by Rosin to define the regions of interest, where the vehicles appear with dense edges. The saliency map is a sum of distance transforms (DT) of a set of edges maps, which are obtained by a threshold decomposition of the gradient image with a set of thresholds. A binary mask for highlighting the regions of interest is then obtained by a moment-preserving thresholding of the normalized saliency map. Secondly, the regions of interest were over-segmented by the SLIC superpixels proposed recently by Achanta et al. to cluster pixels into the color constancy sub-regions. In the aerial images of 11.2 cm/pixel resolution, the vehicles in general do not exceed 20 x 40 pixels. We introduced a size constraint to guarantee no superpixels exceed the size of a vehicle. The superpixels were then classified to vehicle or non-vehicle by the Support Vector Machine (SVM), in which the Scale Invariant Feature Transform (SIFT) features and the Linear Binary Pattern (LBP) texture features were used. Both features were extracted at two scales with two size patches. The small patches capture local structures and the larger patches include the neighborhood information. Preliminary results show a significant gain in the detection. The vehicles were detected with a dense concentration of the vehicle-class superpixels. Even dark color cars were successfully detected. A validation process will follow to reduce the presence of isolated false alarms in the background.

  2. Effect of miR-138 on the antioxidant function of lens epithelial cells affected by age-related cataracts

    Directory of Open Access Journals (Sweden)

    Bo Lu

    2018-03-01

    Full Text Available AIM: To investigate the effects and mechanism of miR-138 in mediating the antioxidant function of lens epithelial cells affected by age-related cataracts. METHODS: Real-time quantitative PCR(RT-qPCRwas used to detect miR-138 expression in the anterior lens capsules of healthy people, the anterior lens capsules of patients with age-related cataracts, and human epithelial cell line(SRA01/04cells exposed to oxidative stress. A 2', 7'-dichloro-fluorescein diacetate(DCFH-DAprobe was used to measure the levels of endogenous reactive oxygen species(ROSin human lens epithelial cells(hLECsexposed to 400μmol/L H2O2 for 1h. SRA01/04 cells were transfected with either miR-138 mimics, mimic controls, miR-138 inhibitors or inhibitor controls. After 72h, these cells were exposed to 400μmol/L H2O2 for 1h, then p53 and Bax mRNA expression were measured using RT-qPCR. Expression of p53 and Bax protein were also measured by western blotting analysis. Finally, cell viability was assessed using an MTS assay. RESULTS: Compared to the control group, expression of miR-138 in the anterior lens capsules of age-related cataract patients and in SRA01/04 cells exposed to oxidative stress significantly increased(PPPPCONCLUSION: The expression of miR-138 is upregulated in the anterior lens capsules of age-related cataract patients. MiR-138 decreases the anti-oxidative stress capacity of lens epithelial cells by upregulating p53 and Bax, while inhibiting cell proliferation and repair. This finding suggests that miR-138 may play a key role in the development of age-related cataracts.

  3. Mechanical energy release and fuel fragmentation in high energy deposition into fuel under a reactivity initiated accident condition

    International Nuclear Information System (INIS)

    Tsuruta, Takaharu; Saito, Shinzo; Ochiai, Masaaki

    1985-01-01

    The fuel fragmentation is one of important subjects to be studied, since it is one of basic processes of molten fuel-coolant interaction (MFCI) and it has not yet been made clear enough. Accordingly, UO 2 fuel fragmentation was studied in the NSRR experiments simulating a reactivity initiated accident (RIA). As results of the experiments, the distribution of the size of fuel fragments was obtained and the mechanism of fuel fragmentation was discussed as described below. It was revealed that the distribution was well displayed in the form of logarithmic Rosin-Rammler's distribution law. It was shown that the conversion ratio from thermal energy to mechanical in the experiment was in inverse propotion to the volume-surface mean diameter defined as a ratio of the total volume of fragments to the total surface. Consequently, it was confirmed that the mean diameter was proper as an index for the degree of the fuel fragmentation. It was also pointed out that the Weber-type hydraulic instability model for fragmentation was consistent with the experimental results. The mechanism of the fuel fragmentation is understood as follows. Cladding tube is ruptured due to the increase in rod pressure when fuel is molten, and then molten fuel spouts through the openings in the form of jet. As a result of molten fuel spouting, fuel is fragmented by the Weber-type of hydraulic instability. The model well explains the effects of experimental parameters as heat deposition, subcooling of cooling water and capsule diameter, on the fuel fragmentation. According to the model, fuel fragments have to be spherical. There were many spherical particles which had hollow and burst crack. This may be due to internal burst during solidification process. The items which should be studied further are also described in the end of this report. (author)

  4. Reference Genes for qPCR Analysis in Resin-Tapped Adult Slash Pine As a Tool to Address the Molecular Basis of Commercial Resinosis

    Directory of Open Access Journals (Sweden)

    Júlio C. de Lima

    2016-06-01

    Full Text Available Pine oleoresin is a major source of terpenes, consisting of turpentine (mono- and sesquiterpenes and rosin (diterpenes fractions. Higher oleoresin yields are of economic interest, since oleoresin derivatives make up a valuable source of materials for chemical industries. Oleoresin can be extracted from living trees, often by the bark streak method, in which bark removal is done periodically, followed by application of stimulant paste containing sulfuric acid and other chemicals on the freshly wounded exposed surface. To better understand the molecular basis of chemically-stimulated and wound induced oleoresin production, we evaluated the stability of 11 putative reference genes for the purpose of normalization in studying Pinus elliottii gene expression during oleoresinosis. Samples for RNA extraction were collected from field-grown adult trees under tapping operations using stimulant pastes with different compositions and at various time points after paste application. Statistical methods established by geNorm, NormFinder, and BestKeeper softwares were consistent in pointing as adequate reference genes HISTO3 and UBI. To confirm expression stability of the candidate reference genes, expression profiles of putative P. elliottii orthologs of resin biosynthesis-related genes encoding Pinus contorta β-pinene synthase [PcTPS-(−β-pin1], P. contorta levopimaradiene/abietadiene synthase (PcLAS1, Pinus taeda α-pinene synthase [PtTPS-(+αpin], and P. taeda α-farnesene synthase (PtαFS were examined following stimulant paste application. Increased oleoresin yields observed in stimulated treatments using phytohormone-based pastes were consistent with higher expression of pinene synthases. Overall, the expression of all genes examined matched the expected profiles of oleoresin-related transcript changes reported for previously examined conifers.

  5. Chemical profiling and adulteration screening of Aquilariae Lignum Resinatum by Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation infrared (2D-IR) spectroscopy.

    Science.gov (United States)

    Qu, Lei; Chen, Jian-Bo; Zhang, Gui-Jun; Sun, Su-Qin; Zheng, Jing

    2017-03-05

    As a kind of expensive perfume and valuable herb, Aquilariae Lignum Resinatum (ALR) is often adulterated for economic motivations. In this research, Fourier transform infrared (FT-IR) spectroscopy is employed to establish a simple and quick method for the adulteration screening of ALR. First, the principal chemical constituents of ALR are characterized by FT-IR spectroscopy at room temperature and two-dimensional correlation infrared (2D-IR) spectroscopy with thermal perturbation. Besides the common cellulose and lignin compounds, a certain amount of resin is the characteristic constituent of ALR. Synchronous and asynchronous 2D-IR spectra indicate that the resin (an unstable secondary metabolite) is more sensitive than cellulose and lignin (stable structural constituents) to the thermal perturbation. Using a certified ALR sample as the reference, the infrared spectral correlation threshold is determined by 30 authentic samples and 6 adulterated samples. The spectral correlation coefficient of an authentic ALR sample to the standard reference should be not less than 0.9886 (p=0.01). Three commercial adulterated ALR samples are identified by the correlation threshold. Further interpretation of the infrared spectra of the adulterated samples indicates the common adulterating methods - counterfeiting with other kind of wood, adding ingredient such as sand to increase the weight, and adding the cheap resin such as rosin to increase the content of resin compounds. Results of this research prove that FT-IR spectroscopy can be used as a simple and accurate quality control method of ALR. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Flashing liquid jets and two-phase droplet dispersion I. Experiments for derivation of droplet atomisation correlations.

    Science.gov (United States)

    Cleary, Vincent; Bowen, Phil; Witlox, Henk

    2007-04-11

    The large-scale release of a liquid contained at upstream conditions above its local atmospheric boiling point is a scenario often given consideration in process industry risk analysis. Current-hazard quantification software often employs simplistic equilibrium two-phase approaches. Scaled water experiments have been carried out measuring droplet velocity and droplet size distributions for a range of exit orifice aspect ratios (L/d) and conditions representing low to high superheat. 2D Phase-Doppler Anemometry has been utilised to characterise droplet kinematics and spray quality. Droplet size correlations have been developed for non-flashing, the transition between non-flashing and flashing, and fully flashing jets. Using high-speed shadowography, transition between regimes is defined in terms of criteria identified in the external flow structure. An overview companion paper provides a wider overview of the problem and reports implementation of these correlations into consequence models and subsequent validation. The fluid utilised throughout is water, hence droplet correlations are developed in non-dimensional form to allow extrapolation to other fluids through similarity scaling, although verification of model performance for other fluids is required in future studies. Data is reduced via non-dimensionalisation in terms of the Weber number and Jakob number, essentially representing the fluid mechanics and thermodynamics of the system, respectively. A droplet-size distribution correlation has also been developed, conveniently presented as a volume undersize distribution based on the Rosin-Rammler distribution. Separate correlations are provided for sub-cooled mechanical break-up and fully flashing jets. This form of correlation facilitates rapid estimates of likely mass rainout quantities, as well as full distribution information for more rigorous two-phase thermodynamic modelling in the future.

  7. Characterization of Medication Velocity and Size Distribution from Pressurized Metered-Dose Inhalers by Phase Doppler Anemometry.

    Science.gov (United States)

    Alatrash, Abubaker; Matida, Edgar

    2016-12-01

    Particle size and velocity are two of the most significant factors that impact the deposition of pressurized metered-dose inhaler (pMDI) sprays in the mouth cavity. pMDIs are prominently used around the world in the treatment of patients suffering from a variety of lung diseases such as asthma and chronic obstructive pulmonary disease. Since their introduction in the field, and as a result of their effectiveness and simplicity of usage, pMDIs are considered to be the most widely prescribed medical aerosol delivery system. In the current study, particle velocity and size distribution were measured at three different locations along the centerline of a pMDI spray using Phase Doppler Anemometry. pMDIs from four different pharmaceutical companies were tested, each using salbutamol sulfate as the medication. Measurements along at the pMDI centerline (at 0, 75, and 100 mm downstream of the inhaler mouthpiece) showed that the spray velocities were bimodal in time for all four pMDI brands. The first peak occurred as the spray was leaving the mouthpiece, while the second peak (at the same location, 0 mm) occurred at around 60, 95, 95, and 115 milliseconds later, respectively, for the four tested inhalers, with a drop in the velocity between the two peaks. Three probability density functions (PDFs) were tested, and the Rosin-Rammler PDF best fit the empirical data, as determined using a chi-squared test. These results suggest that there is a difference in the mean particle velocities at the centerline for the tested pMDIs and the diameter of released particles varied statistically for each brand.

  8. Flashing liquid jets and two-phase droplet dispersion

    International Nuclear Information System (INIS)

    Cleary, Vincent; Bowen, Phil; Witlox, Henk

    2007-01-01

    The large-scale release of a liquid contained at upstream conditions above its local atmospheric boiling point is a scenario often given consideration in process industry risk analysis. Current-hazard quantification software often employs simplistic equilibrium two-phase approaches. Scaled water experiments have been carried out measuring droplet velocity and droplet size distributions for a range of exit orifice aspect ratios (L/d) and conditions representing low to high superheat. 2D Phase-Doppler Anemometry has been utilised to characterise droplet kinematics and spray quality. Droplet size correlations have been developed for non-flashing, the transition between non-flashing and flashing, and fully flashing jets. Using high-speed shadowography, transition between regimes is defined in terms of criteria identified in the external flow structure. An overview companion paper provides a wider overview of the problem and reports implementation of these correlations into consequence models and subsequent validation. The fluid utilised throughout is water, hence droplet correlations are developed in non-dimensional form to allow extrapolation to other fluids through similarity scaling, although verification of model performance for other fluids is required in future studies. Data is reduced via non-dimensionalisation in terms of the Weber number and Jakob number, essentially representing the fluid mechanics and thermodynamics of the system, respectively. A droplet-size distribution correlation has also been developed, conveniently presented as a volume undersize distribution based on the Rosin-Rammler distribution. Separate correlations are provided for sub-cooled mechanical break-up and fully flashing jets. This form of correlation facilitates rapid estimates of likely mass rainout quantities, as well as full distribution information for more rigorous two-phase thermodynamic modelling in the future

  9. Pesticidal seed coats based on azadirachtin-A: release kinetics, storage life and performance.

    Science.gov (United States)

    Nisar, Keyath; Kumar, Jitendra; Arun Kumar, M B; Walia, Suresh; Shakil, Najam A; Parsad, Rajender; Parmar, Balraj S

    2009-02-01

    Infestation of seeds by pests during storage leads to deterioration in quality. Seed coating is an effective option to overcome the menace. Unlike synthetic fungicidal seed coats, little is known of those based on botanicals. This study aims at developing azadirachtin-A-based pesticidal seed coats to maintain seed quality during storage. Polymer- and clay-based coats containing azadirachtin-A were prepared and evaluated for quality maintenance of soybean seed during storage. Gum acacia, gum tragacanth, rosin, ethyl cellulose, hydroxyethyl cellulose, polyethyl methacrylate, methyl cellulose, polyethylene glycol, polyvinyl chloride, polyvinyl acetate, polyvinyl pyrrolidone and Agrimer VA 6 polymers and the clay bentonite were used as carriers. The time for 50% release (t(1/2)) of azadirachtin-A into water from the seeds coated with the different coats ranged from 8.02 to 21.36 h. The half-life (T(1/2)) of azadirachtin-A in the coats on seed ranged from 4.37 to 11.22 months, as compared with 3.45 months in azadirachtin-A WP, showing an increase by a factor of nearly 1.3-3.3 over the latter. The coats apparently acted as a barrier to moisture to reduce azadirachtin-A degradation and prevented proliferation of storage fungi. Polyethyl methacrylate, polyvinyl acetate and polyvinyl pyrrolidone were significantly superior to the other polymers. Azadirachtin-A showed a significant positive correlation with seed germination and vigour, and negative correlation with moisture content. Effective polymeric carriers for seed coats based on azadirachtin-A are reported. These checked seed deterioration during storage by acting as a barrier to moisture and reduced the degradation of azadirachtin-A.

  10. Study on Sumbawa gold ore liberation using rod mill: effect of rod-number and rotational speed on particle size distribution

    Science.gov (United States)

    Prasetya, A.; Mawadati, A.; Putri, A. M. R.; Petrus, H. T. B. M.

    2018-01-01

    Comminution is one of crucial steps in gold ore processing used to liberate the valuable minerals from gaunge mineral. This research is done to find the particle size distribution of gold ore after it has been treated through the comminution process in a rod mill with various number of rod and rotational speed that will results in one optimum milling condition. For the initial step, Sumbawa gold ore was crushed and then sieved to pass the 2.5 mesh and retained on the 5 mesh (this condition was taken to mimic real application in artisanal gold mining). Inserting the prepared sample into the rod mill, the observation on effect of rod-number and rotational speed was then conducted by variating the rod number of 7 and 10 while the rotational speed was varied from 60, 85, and 110 rpm. In order to be able to provide estimation on particle distribution of every condition, the comminution kinetic was applied by taking sample at 15, 30, 60, and 120 minutes for size distribution analysis. The change of particle distribution of top and bottom product as time series was then treated using Rosin-Rammler distribution equation. The result shows that the homogenity of particle size and particle size distribution is affected by rod-number and rotational speed. The particle size distribution is more homogeneous by increasing of milling time, regardless of rod-number and rotational speed. Mean size of particles do not change significantly after 60 minutes milling time. Experimental results showed that the optimum condition was achieved at rotational speed of 85 rpm, using rod-number of 7.

  11. The neural exploitation hypothesis and its implications for an embodied approach to language and cognition: Insights from the study of action verbs processing and motor disorders in Parkinson's disease.

    Science.gov (United States)

    Gallese, Vittorio; Cuccio, Valentina

    2018-03-01

    As it is widely known, Parkinson's disease is clinically characterized by motor disorders such as the loss of voluntary movement control, including resting tremor, postural instability, and bradykinesia (Bocanegra et al., 2015; Helmich, Hallett, Deuschl, Toni, & Bloem, 2012; Liu et al., 2006; Rosin, Topka, & Dichgans, 1997). In the last years, many empirical studies (e.g., Bocanegra et al., 2015; Spadacenta et al., 2012) have also shown that the processing of action verbs is selectively impaired in patients affected by this neurodegenerative disorder. In the light of these findings, it has been suggested that Parkinson disorder can be interpreted within an embodied cognition framework (e.g., Bocanegra et al., 2015). The central tenet of any embodied approach to language and cognition is that high order cognitive functions are grounded in the sensory-motor system. With regard to this point, Gallese (2008) proposed the neural exploitation hypothesis to account for, at the phylogenetic level, how key aspects of human language are underpinned by brain mechanisms originally evolved for sensory-motor integration. Glenberg and Gallese (2012) also applied the neural exploitation hypothesis to the ontogenetic level. On the basis of these premises, they developed a theory of language acquisition according to which, sensory-motor mechanisms provide a neurofunctional architecture for the acquisition of language, while retaining their original functions as well. The neural exploitation hypothesis is here applied to interpret the profile of patients affected by Parkinson's disease. It is suggested that action semantic impairments directly tap onto motor disorders. Finally, a discussion of what theory of language is needed to account for the interactions between language and movement disorders is presented. Copyright © 2018 Elsevier Ltd. All rights reserved.

  12. Materials compatibility and aging for flux and cleaner combinations

    Energy Technology Data Exchange (ETDEWEB)

    Archuleta, Kim M. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Piatt, Rochelle [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-01-01

    A materials study of high reliability electronics cleaning is presented here. In Phase 1, mixed type substrates underwent a condensed contaminants application to view a worst- case scenario for unremoved flux with cleaning agent residue for parts in a silicone oil filled environment. In Phase 2, fluxes applied to copper coupons and to printed wiring boards underwent gentle cleaning then accelerated aging in air at 65% humidity and 30 O C. Both sets were aged for 4 weeks. Contaminants were no-clean (ORL0), water soluble (ORH1 liquid and ORH0 paste), and rosin (RMA; ROL0) fluxes. Defluxing agents were water, solvents, and engineered aqueous defluxers. In the first phase, coupons had flux applied and heated, then were placed in vials of oil with a small amount of cleaning agent and additional coupons. In the second phase, pairs of copper coupons and PWB were hand soldered by application of each flux, using tin-lead solder in a strip across the coupon or a set of test components on the PWB. One of each pair was cleaned in each cleaning agent, the first with a typical clean, and the second with a brief clean. Ionic contamination residue was measured before accelerated aging. After aging, substrates were removed and a visual record of coupon damage made, from which a subjective rank was applied for comparison between the various flux and defluxer combinations; more corrosion equated to higher rank. The ORH1 water soluble flux resulted in the highest ranking in both phases, the RMA flux the least. For the first phase, in which flux and defluxer remained on coupons, the aqueous defluxers led to worse corrosion. The vapor phase cleaning agents resulted in the highest ranking in the second phase, in which there was no physical cleaning. Further study of cleaning and rinsing parameters will be required.

  13. CFD simulation of the combustion process of the low-emission vortex boiler

    Science.gov (United States)

    Chernov, A. A.; Maryandyshev, P. A.; Pankratov, E. V.; Lubov, V. K.

    2017-11-01

    Domestic heat and power engineering needs means and methods for optimizing the existing boiler plants in order to increase their technical, economic and environmental work. The development of modern computer technology, methods of numerical modeling and specialized software greatly facilitates the solution of many emerging problems. CFD simulation allows to obtaine precise results of thermochemical and aerodynamic processes taking place in the furnace of boilers in order to optimize their operation modes and develop directions for their modernization. The paper presents the results of simulation of the combustion process of a low-emission vortex coal boiler of the model E-220/100 using the software package Ansys Fluent. A hexahedral grid with a number of 2 million cells was constructed for the chosen boiler model. A stationary problem with a two-phase flow was solved. The gaseous components are air, combustion products and volatile substances. The solid phase is coal particles at different burnup stages. The Euler-Lagrange approach was taken as a basis. Calculation of the coal particles trajectories was carried out using the Discrete Phase Model which distribution of the size particle of coal dust was accounted for using the Rosin-Rammler equation. Partially Premixed combustion model was used as the combustion model which take into account elemental composition of the fuel and heat analysis. To take turbulence into account, a two-parameter k-ε model with a standard wall function was chosen. Heat transfer by radiation was calculated using the P1-approximation of the method of spherical harmonics. The system of spatial equations was numerically solved by the control volume method using the SIMPLE algorithm of Patankar and Spaulding. Comparison of data obtained during the industrial-operational tests of low-emission vortex boilers with the results of mathematical modeling showed acceptable convergence of the tasks of this level, which confirms the adequacy of the

  14. potencialmente repelentes à fauna consumidora

    Directory of Open Access Journals (Sweden)

    Guilherme O. S. Ferraz de Arruda

    2007-01-01

    Full Text Available The seed of Araucaria angustifolia, “pinhão”, is becoming a alternative way of income for many families living at south and southeast of Brazil. The intensive attack on Paraná pine seeds by the wild fauna, that occur at newly-planted areas by direct sowing and at nursery of seedlings, is one of several adverses and distimulating factors to specie spreading. The objective of this work was to verify probable phytotoxics effects of some naturals and synthetics substances potentially repellentes to wild fauna, in Araucaria angustifolia seeds “in vitro”. The experiment was realized at Phytopatology and Plant Physiology Laboratory of Center of Agroveterinary Sciences, University of Santa Catarina State – Brazil, from june to december, 2004. The Paraná pine seeds, after preparation and treatment with vegetal and not vegetal substances, were sown in plastic trays with vermiculite substratum and put on cabin of growth with controlled temperature, relative humidity of air, humidity of substratum and photoperiods. It was adopted the randomized complete design with 15 treatments, with 10 seeds each treatment and with 4 repetitions. The tested substances separately or in mixtures were: extract of fruit of red pepper, root of parsley, stem and leaf of wormwood herb, lemon scented gum essential oil, linseed oil, castor bean oil, rosin, copper oxychloride, copper sulphate, sulphur and látex ink. The root emission, stem emission, length of main root and length of stem were evaluated 76 days after sowing and statisticaly analyzed. The analysis make possible to conclude that the tested extract do not have phytotoxic effect on seeds and that the substances tested “in vitro” can be used in field experiments, in repellence traits for Parana pine seeds consuming fauna. Keywords: effects fitotóxicos; pine seeds of Araucaria angustifolia; predação of seeds.

  15. Assessing the impact of national level interventions on workplace respiratory disease in the UK: part 2--regulatory activity by the Health and Safety Executive.

    Science.gov (United States)

    Stocks, S J; McNamee, R; Turner, S; Carder, M; Agius, R M

    2013-07-01

    To investigate whether interventions implemented by the UK Health and Safety Executive addressing exposure to isocyanate-based spray paints in motor vehicle repair (MVR), flour dust in craft bakeries, rosin-based solder flux fume (RBSFF) in the electronics industry, metalworking fluids and wood dust coincided with a decline in incidence of work-related short latency respiratory disease (SLRD) or asthma in the target groups. Changes in the incidence of SLRD reported to a UK-based surveillance scheme were compared using a longitudinal, negative binomial regression model with β distributed random effects. An interrupted time series design was used and comparisons according to inclusion or exclusion in the target group were made by including a statistical interactions expressed as a ratio of incidence rate ratios (RIRRs) in the model. The incidence of SLRD attributed to flour dust significantly increased relative to all other agents (RIRR: 1.10; 95% CI 1.06 to 1.16) whereas SLRD attributed to RBSFF significantly declined relative to all other agents (0.94; 0.90 to 0.99). No significant changes in the incidence of SLRD attributed to wood dust (1.03; 0.91 to 1.16) or spray paints (1.03; 0.95 to 1.11) relative to all other agents were observed. A higher proportion of reports originated from the industries targeted by the intervention for RBSFF (65/107; 61%) than spray painting (27/93; 27%) or wood dust (16/42; 38%). These data support a beneficial effect of interventions to reduce exposure to RBSFF but an increase in SLRD attributed to flour dust may indicate increased exposure or increased awareness of the problem.

  16. Evaluation of the antimicrobial activity of each component in Grossman’s sealer Avaliação da atividade antimicrobiana de cada um dos componentes do cimento de Grossman

    Directory of Open Access Journals (Sweden)

    Ricardo Novak Savioli

    2006-04-01

    Full Text Available The antimicrobial activity of Grossman’s sealer and its components was evaluated on 13 different strains using the double layer well-diffusion method. Results revealed that Grossman’s sealer presented antimicrobial activity against all the tested strains. Among the components of the cement, sodium tetraborate presented the greatest antimicrobial activity, both in type and diameter of the halo and ring of inhibition. Sealer powder, rosin, and eugenol presented similar activity, with no effect on P. aeruginosa and C. albicans. Among these, only eugenol had an effect on E. coli. Zinc oxide was only active against S. sobrinus and E. coli. Barium sulfate and bismuth subcarbonate did not show any antimicrobial effect.Os autores estudaram a atividade antimicrobiana do cimento de Grossman e de seus componentes sobre 13 diferentes cepas pelo método de difusão de poço em camada dupla. Os resultados revelaram que o cimento de Grossman apresentou atividade antimicrobiana contra todas as cepas utilizadas. Dos componentes do cimento, o tetraborato de sódio foi o que apresentou maior atividade antimicrobiana, tanto por tipo como por tamanho do halo e aro de inibição. O pó do cimento, o breu e o eugenol apresentaram atividades semelhantes, sendo que eles não tiveram ação sobre P. aeruginosa e C. albicans e, dos três componentes, somente o eugenol teve ação sobre E coli. O óxido de zinco somente teve ação sobre S. sobrinus e E. coli. O sulfato de bário e o subcarbonato de bismuto não tiveram nenhuma ação antimicrobiana.

  17. [Epidemiology of contact dermatitis: prevalence of sensitization to different allergens and associated factors].

    Science.gov (United States)

    Bordel-Gómez, Ma T; Miranda-Romero, A; Castrodeza-Sanz, J

    2010-01-01

    general. Women became sensitized at a younger age than men, and the frequency of positive results in the patch tests increased with age, reaching a maximum at between 60 and 69 years of age, when the greatest rate of sensitization occurred. Comparison of our results with other Spanish data showed a progressive and constant increase in sensitization to nickel sulfate, fragrance blends, balsam of Peru, and rosin, and a decrease in sensitization to potassium dichromate. The inclusion of new allergens such as palladium chloride, diallyl disulfide, and p-toluene sulfonamide formaldehyde improved the sensitivity of the standard battery in the detection of contact sensitization. We therefore recommend further studies of these allergens.

  18. Progression of hydroxychloroquine toxic effects after drug therapy cessation: new evidence from multimodal imaging.

    Science.gov (United States)

    Mititelu, Mihai; Wong, Brandon J; Brenner, Marie; Bryar, Paul J; Jampol, Lee M; Fawzi, Amani A

    2013-09-01

    Given the infrequent occurrence of hydroxychloroquine toxic effects, few data are available about the presenting features and long-term follow-up of patients with hydroxychloroquine retinopathy, making it difficult to surmise the clinical course of patients after cessation of drug treatment. To report functional and structural findings of hydroxychloroquine retinal toxic effects after drug therapy discontinuation. A retrospective medical record review was performed to identify patients taking hydroxychloroquine who were screened for toxic effects from January 1, 2009, through August 31, 2012, in the eye centers of Northwestern University and the University of Southern California. Northwestern University Sorrel Rosin Eye Center, Chicago, Illinois, and the Doheny Eye Institute at the University of Southern California, Los Angeles. Seven consecutive patients diagnosed as having hydroxychloroquine retinal toxic effects. Retinal toxic effects. Seven patients (1 man and 6 women) with a mean age of 55.9 years (age range, 25-74 years) developed retinal toxic effects after using hydroxychloroquine for a mean of 10.4 years (range, 3-19 years). Fundus examination revealed macular pigmentary changes in all 7 patients, corresponding to abnormal fundus autofluorescence (FAF). On spectral domain optical coherence tomography, there was outer retinal foveal resistance (preservation of the external limiting membrane and the photoreceptor layer) in 6 patients. After drug therapy discontinuation, 5 patients experienced outer retinal regeneration (3 subfoveally and 2 parafoveally), with associated functional visual improvement on static perimetry in 2 patients. Over time, FAF remained stable in 3 patients, whereas the remaining patients had a pattern of hypoautofluorescence that replaced areas of initial hyperautofluorescence (2 patients) and enlargement of the total area of abnormal FAF (2 patients). Preservation of the external limiting membrane carries a positive prognostic value in

  19. NASA Numerical and Experimental Evaluation of UTRC Low Emissions Injector

    Science.gov (United States)

    Hicks, Yolanda R.; Tedder, Sarah A.; Anderson, Robert C.; Iannetti, Anthony C.; Smith, Lance L.; Dai, Zhongtao

    2014-01-01

    Computational and experimental analyses of a PICS-Pilot-In-Can-Swirler technology injector, developed by United Technologies Research Center (UTRC) are presented. NASA has defined technology targets for near term (called "N+1", circa 2015), midterm ("N+2", circa 2020) and far term ("N+3", circa 2030) that specify realistic emissions and fuel efficiency goals for commercial aircraft. This injector has potential for application in an engine to meet the Pratt & Whitney N+3 supersonic cycle goals, or the subsonic N+2 engine cycle goals. Experimental methods were employed to investigate supersonic cruise points as well as select points of the subsonic cycle engine; cruise, approach, and idle with a slightly elevated inlet pressure. Experiments at NASA employed gas analysis and a suite of laser-based measurement techniques to characterize the combustor flow downstream from the PICS dump plane. Optical diagnostics employed for this work included Planar Laser-Induced Fluorescence of fuel for injector spray pattern and Spontaneous Raman Spectroscopy for relative species concentration of fuel and CO2. The work reported here used unheated (liquid) Jet-A fuel for all fuel circuits and cycle conditions. The initial tests performed by UTRC used vaporized Jet-A to simulate the expected supersonic cruise condition, which anticipated using fuel as a heat sink. Using the National Combustion Code a PICS-based combustor was modeled with liquid fuel at the supersonic cruise condition. All CFD models used a cubic non-linear k-epsilon turbulence wall functions model, and a semi-detailed Jet-A kinetic mechanism based on a surrogate fuel mixture. Two initial spray droplet size distribution and spray cone conditions were used: (1) an initial condition (Lefebvre) with an assumed Rosin-Rammler distribution, and 7 degree Solid Spray Cone; and (2) the Boundary Layer Stripping (BLS) primary atomization model giving the spray size distribution and directional properties. Contour and line plots

  20. Identification of the nonlinear excitation force acting on a bowed string using the dynamical responses at remote locations

    International Nuclear Information System (INIS)

    Debut, V.; Antunes, J.; Delaune, X.

    2010-01-01

    For achieving realistic numerical simulations of bowed string instruments, based on physical modeling, a good understanding of the actual friction interaction phenomena is of great importance. Most work published in the field including our own has assumed that bow/string frictional forces behave according to the classical Coulomb stick-slip model, with an empirical velocity-dependent sliding friction coefficient. Indeed, the basic self-excited string motions (such as the Helmholtz regime) are well captured using such friction model. However, recent work has shown that the tribological behavior of the bow/string rosin interface is rather complex, therefore the basic velocity-dependent Coulomb model may be an over-simplistic representation of the friction force. More specifically, it was suggested that a more accurate model of the interaction force can be achieved by coupling the system dynamical equations with a thermal model which encapsulates the complex interface phenomena. In spite of the interesting work performed by Askenfelt, a direct measurement of the actual dynamical friction forces without disturbing the string motion is quite difficult. Therefore, in this work we develop a modal-based identification technique making use of inverse methods and optimization techniques, which enables the identification of the interface force, as well as the string self-excited motion, from the dynamical reactions measured at the string end supports. The method gives convincing results using simulated data originated from nonlinear computations of a bowed string. Furthermore, in cases where the force identifications are very sensitive to errors in the transfer function modal parameters, we suggest a method to improve the modal frequencies used for the identifications. Preliminary experimental results obtained using a basic bowing device, by which the string is excited with the stick of the bow, are then presented. Our identifications, from the two dynamical string reactions

  1. A New 4D Imaging Method for Three-Phase Analogue Experiments in Volcanology (and Other Three-Phase Systems)

    Science.gov (United States)

    Oppenheimer, J.; Patel, K. B.; Lev, E.; Hillman, E. M. C.

    2017-12-01

    Bubbles and crystals suspended in magmas interact with each other on a small scale, which affects large-scale volcanic processes. Studying these interactions on relevant scales of time and space is a long-standing challenge. Therefore, the fundamental explanations for the behavior of bubble- and crystal-rich magmas are still largely speculative. Recent application of X-ray tomography to experiments with synthetic magmas has already improved our understanding of small-scale 4D (3D + time) phenomena. However, this technique has low imaging rates Confocally Aligned Planar Excitation (SCAPE) microscopy. This method based on laser-fluorescence has been used to image live biological processes at high speed and in 3D. It allows imaging rates of up to several hundred vps and image volumes up to 1 x 1 x 0.5 mm3, with a trade-off between speed and spatial resolution. We ran two sets of experiments with silicone oil and soda-lime glass beads of <50 µm diameter, contained within a vertical glass casing 50 x 5 x 4 mm3. We used two different bubble generation methods. In the first set of experiments, small air bubbles (< 1 mm) were introduced through a hole at the bottom of the sample and allowed to rise through a suspension with low-viscosity oil. We successfully imaged bubble rise and particle movements around the bubble. In the second set, bubbles were generated by mixing acetone into the suspension and decreasing the surface pressure to cause a phase change to gaseous acetone. This bubble generation method compared favorably with previous gum rosin-acetone experiments: they provided similar degassing behaviors, along with more control on suspension viscosity and optimal optical properties for laser transmission. Large volumes of suspended bubbles, however, interfered with the laser path. In this set, we were able to track bubble nucleation sites and nucleation rates in 4D. This promising technique allows the study of small-scale interactions in two- and three-phase systems

  2. Declarative memory in abused and neglected infants.

    Science.gov (United States)

    Cheatham, Carol L; Larkina, Marina; Bauer, Patricia J; Toth, Sheree L; Cicchetti, Dante

    2010-01-01

    's imitative behaviors. Thus, it would appear that maternal negative feedback to child-initiated behaviors is related to an increase in imitative behaviors that are most likely met with positive reinforcement. The continued pursuit of this positivity may impede the development of self-initiated behaviors; delayed development of self-initiated behavior has been linked to disorders of social competence (Landry, Smith, Miller-Loncar, & Swank, 1998). However, imitation has long been known to be a mechanism of learning (Piaget, 1962) and has become an accepted tool for assessment of declarative memory (Bauer, 2004). Whereas the adaptation to abuse posited by Valentino et al. (2006) may be detrimental to social development, our data for this same sample indicate that the reliance on imitative behavior exhibited by the abused children may afford them an advantage at 21 months of age in imitation paradigms. The neglected children are thus at a disadvantage relative to the abused children in the study reported here in that they were not reinforced by mothers for imitative behavior. It is important to note that all children in this sample were from low-income homes. Scores on these events for both target actions and ordered pairs are higher in samples of higher SES children (e.g., Bauer et al., 2000). Thus, the low SES of the families affected performance across the groups. It is possible that the factor responsible for the difference between the abused group and the neglected group is resilience in the face of poverty. Resilience is the ability to recover following a traumatic event or adversity (Masten, 2001), and has been related to child characteristics, such as general intelligence (Masten et al., 1988). It has been proposed that neural plasticity may be responsible for this recovery (Cicchetti & Curtis, 2006). Alternatively, as has been detailed earlier in this chapter, the advantage afforded abused children could arise from the strengthening of neural pathways. It would be

  3. Bioleaching of heavy metal polluted sediment: kinetics of leaching and microbial sulfur oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Loeser, C. [Technische Universitaet Dresden, Institut fuer Lebenmitteltechnik und Bioverfahrenstechnik, D-01062 Dresden (Germany); Zehnsdorf, A. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Umwelt- und Biotechnologisches Zentrum (UBZ), Permoserstrasse 15, D-04318 Leipzig (Germany); Goersch, K.; Seidel, H. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Department Bioremediation, Permoserstrasse 15, D-04318 Leipzig (Germany)

    2005-12-01

    Remediation of heavy metal polluted sediment through bioleaching using elemental sulfur (S{sup 0}) as the leaching agent can be regarded as a two-step process: firstly, the microbial oxidation of the added S{sup 0} to sulfuric acid and, secondly, the reaction of the produced acid with the sediment. Here, both subprocesses were studied in detail independently: oxidized river sediment was either suspended in sulfuric acid of various strengths, or mixed with various amounts of finely ground S{sup 0} powder (diameter of the S{sup 0} particles between 1 and 175 {mu}m with a Rosin-Rammler-Sperling-Bennet (RRSB) distribution and an average diameter of 35 {mu}m) and suspended in water. The leaching process was observed by repeated analysis of the suspension concerning pH, soluble sulfate and metals, and remaining S{sup 0}. In the case of abiotic leaching with H{sub 2}SO{sub 4}, the reaction between the acid and the sediment resulted in a gradual increase in pH and a solubilization of sediment-borne heavy metals which required some time; 80 % of the finally solubilized heavy metals was dissolved after 1 h, 90 % after 10 h, and 100 % after 100 h. In the case of bioleaching, the rate of S{sup 0} oxidation was maximal at the beginning, gradually diminished with time, and was proportional to the initial amount of S{sup 0}. Due to its very low solubility in water, S{sup 0} is oxidized in a surface reaction catalyzed by attached bacteria. The oxidation let the particles shrink, their surface became smaller and, thus, the S{sup 0} oxidation rate gradually decreased. The shrinking rate was time-invariant and, at 30 C, amounted to 0.5 {mu}m/day (or 100 {mu}g/cm{sup 2}/day). Within 21 days, 90 % of the applied S{sup 0} was oxidized. Three models with a different degree of complexity have been developed that describe this S{sup 0} oxidation, assuming S{sup 0} particles of uniform size (I), using a measured particle size distribution (II), or applying an adapted RRSB distribution (III

  4. Heavy-metal-induced reactive oxygen species: phytotoxicity and physicochemical changes in plants.

    Science.gov (United States)

    Shahid, Muhammad; Pourrut, Bertrand; Dumat, Camille; Nadeem, Muhammad; Aslam, Muhammad; Pinelli, Eric

    2014-01-01

    biomolecules. Heavy-metal-induced ROS cause lipid peroxidation, membrane dismantling and damage to DNA, protein and carbohydrates. Plants have very well-organized defense systems, consisting of enzymatic and non-enzymatic antioxidation processes. The primary defense mechanism for heavy metal detoxification is the reduced absorption of these metals into plants or their sequestration in root cells.Secondary heavy metal tolerance mechanisms include activation of antioxidant enzymes and the binding of heavy metals by phytochelatins, glutathione and amino acids. These defense systems work in combination to manage the cascades of oxidative stress and to defend plant cells from the toxic effects of ROS.In this review, we summarized the biochemiCal processes involved in the over production of ROS as an aftermath to heavy metal exposure. We also described the ROS scavenging process that is associated with the antioxidant defense machinery.Despite considerable progress in understanding the biochemistry of ROS overproduction and scavenging, we still lack in-depth studies on the parameters associated with heavy metal exclusion and tolerance capacity of plants. For example, data about the role of glutathione-glutaredoxin-thioredoxin system in ROS detoxification in plant cells are scarce. Moreover, how ROS mediate glutathionylation (redox signalling)is still not completely understood. Similarly, induction of glutathione and phytochelatins under oxidative stress is very well reported, but it is still unexplained that some studied compounds are not involved in the detoxification mechanisms. Moreover,although the role of metal transporters and gene expression is well established for a few metals and plants, much more research is needed. Eventually, when results for more metals and plants are available, the mechanism of the biochemical and genetic basis of heavy metal detoxification in plants will be better understood. Moreover, by using recently developed genetic and biotechnological tools it

  5. EDITORIAL: Special issue on applied neurodynamics: from neural dynamics to neural engineering Special issue on applied neurodynamics: from neural dynamics to neural engineering

    Science.gov (United States)

    Chiel, Hillel J.; Thomas, Peter J.

    2011-12-01

    Parkinson's disease (PD) are believed to involve atypical synchronized activity in populations of neurons in regions such as the subthalamic nucleus within the basal ganglia (Hauptmann and Tass 2010, Rosin et al 2007). Remediation of PD symptoms via deep brain stimulation (DBS) is limited in that it can only 'force' the system in a small number of independently tunable directions. How can one most effectively desynchronize a high-dimensional dynamical system using an input that is limited to a much smaller dimension? To make things worse, the details of the system for any given patient—number, connectivity and physiology of the neurons involved—are largely unknown. Nabi and Moehlis (2011) take a step toward addressing these issues by considering optimal desynchronizing control for a simple system that retains essential elements of the problem: given three coupled oscillators with a tendency to synchronize (that is, a globally attracting stable synchronized state), and a control signal that can only be applied to one of the oscillators, what is the optimal desynchronizing control signal under a quadratic control penalty? Put another way, with how light a touch is it possible to bring the oscillators away from their preferred synchronized state by a given amount? The answer depends in part on the form taken by the coupling between the cells. For instance, if the coupling between the stimulated cell and the others is identical, then from symmetry one can see that no desynchronizing control signal exists (at least, if the cells are identical). Encouragingly, for reasonable control stimuli, the authors find that control signals of modest size can effectively desynchronize the population for a large fraction of possible couplings. The ninth paper addresses one of the most ambitious areas within neural engineering: the application of control theoretic techniques to dynamics of circuits in the central nervous system. Control of high-dimensional systems (often accessed through