WorldWideScience

Sample records for grounded dielectric slab

  1. Fringe integral equation method for a truncated grounded dielectric slab

    DEFF Research Database (Denmark)

    Jørgensen, Erik; Maci, S.; Toccafondi, A.

    2001-01-01

    The problem of scattering by a semi-infinite grounded dielectric slab illuminated by an arbitrary incident TMz polarized electric field is studied by solving a new set of “fringe” integral equations (F-IEs), whose functional unknowns are physically associated to the wave diffraction processes...... occurring at the truncation. The F-IEs are obtained by subtracting from the surface/surface integral equations pertinent to the truncated slab, an auxiliary set of equations obtained for the canonical problem of an infinite grounded slab illuminated by the same source. The F-IEs are solved by the method...

  2. Mutual coupling between parallel columns of periodic slots in a ground plane surrounded by dielectric slabs

    Science.gov (United States)

    Skinner, J. P.; Munk, Benedikt A.

    1992-01-01

    Arrays of slots with arbitrary orientation in a conducting plane which are infinitely periodic in one dimension and finitely periodic in another dimension are considered. The perfect conducting plane extends infinitely and is bounded on each side by dielectric slabs of finite thickness and infinite extent. Single columns of slots are represented by equivalent magnetic scattering currents, which are solved for via the moment method. The mutual coupling (admittance) between slot columns in the presence of the stratified media is found by the array scanning method (ASM), which expresses the admittance as the average of the scan admittance of an artificially constructed doubly infinite array of slots over all real scan angles. The technique avoids the use of Sommerfeld integrals, but still gives rise to singularities at scan angles corresponding to the resonant excitation of surface waves. An analytical approximation is made to remove these surface wave singularities, thus making numerical implementation of the method practical. The method is quite general and may be extended to thin slot elements of arbitrary shape and orientation.

  3. Superluminal pulse reflection from a weakly absorbing dielectric slab

    CERN Document Server

    Wang, L G; Wang, Li-Gang; Zhu, Shi-Yao

    2006-01-01

    Group delay for a reflected light pulse from a weakly absorbing dielectric slab is theoretically investigated, and large negative group delay is found for weak absorption near a resonance of the slab ($Re(kd)=m\\pi$). The group delays for both the reflected and transmitted pulses will be saturated with the increase of the absorption.

  4. Casimir effect for two lossy dispersive dielectric slabs

    Science.gov (United States)

    Matloob, R.; Keshavarz, A.; Sedighi, D.

    1999-11-01

    The electromagnetic field is quantized using the Green's-function method for the geometry of a Fabry-Perot cavity, made up of two identical lossy dispersive slabs of finite thickness. The dielectric functions of the slabs are assumed to be an arbitrary complex function of frequency obeying causality requirements. The attractive Casimir force between the two slabs is calculated by the help of the latter field operators, via evaluating the difference between the vacuum pressures on both sides of each slab. Special attention is paid to the limiting case of the Casimir effect for two conducting plates. The Lorentz model of the dielectric function is used to demonstrate the variation of the force in terms of plasma frequency. The Casimir force expression is also related to the imaginary part of the response function. The latter expression is used to introduce the repulsive Casimir force between two conducting plates located inside a Fabry-Perot cavity.

  5. Systematic effects induced by a flat isotropic dielectric slab

    CERN Document Server

    Macculi, C; Cortiglioni, S; Peverini, O A; Tascone, R; Zannoni, M; Carretti, Ettore; Cortiglioni, Stefano; Macculi, Claudio; Peverini, Oscar Antonio; Tascone, Riccardo; Zannoni, Mario

    2006-01-01

    The instrumental polarization induced by a flat isotropic dielectric slab in microwave frequencies is faced. We find that, in spite of its isotropic nature, such a dielectric can produce spurious polarization either by transmitting incoming anisotropic diffuse radiation or emitting when it is thermally inhomogeneous. We present evaluations of instrumental polarization generated by materials usually adopted in Radioastronomy, by using the Mueller matrix formalism. As an application, results for different slabs in front of a 32 GHz receiver are discussed. Such results are based on measurements of their complex dielectric constant. We evaluate that a 0.33 cm thick Teflon slab introduces negligible spurious polarization ($< 2.6 \\times 10^{-5}$ in transmission and $< 6 \\times 10^{-7}$ in emission), even minimizing the leakage ($< 10^{-8}$ from $Q$ to $U$ Stokes parameters, and viceversa) and the depolarization ($\\sim 1.3 \\times 10^{-3}$).

  6. Distribution of counterions and interaction between two similarly charged dielectric slabs: roles of charge discreteness and dielectric inhomogeneity.

    Science.gov (United States)

    Pezeshkian, Weria; Nikoofard, Narges; Norouzi, Davood; Mohammad-Rafiee, Farshid; Fazli, Hossein

    2012-06-01

    The distribution of counterions and the electrostatic interaction between two similarly charged dielectric slabs is studied in the strong coupling limit. Dielectric inhomogeneities and discreteness of charge on the slabs have been taken into account. It is found that the amount of dielectric constant difference between the slabs and the environment, and the discreteness of charge on the slabs have opposing effects on the equilibrium distribution of the counterions. At small interslab separations, increasing the amount of dielectric constant difference increases the tendency of the counterions toward the middle of the intersurface space between the slabs and the discreteness of charge pushes them to the surfaces of the slabs. In the limit of point charges, independent of the strength of dielectric inhomogeneity, counterions distribute near the surfaces of the slabs. The interaction between the slabs is attractive at low temperatures and its strength increases with the dielectric constant difference. At room temperature, the slabs may completely attract each other, reach to an equilibrium separation, or have two equilibrium separations with a barrier in between, depending on the system parameters.

  7. Study of stratified dielectric slab medium structures using pseudo-spectral time domain (PSTD) algorithm

    DEFF Research Database (Denmark)

    Tong, M.S.; Lu, Y.; Chen, Y.

    2005-01-01

    A planar stratified dielectric slab medium, which is an interesting problem in optics and geophysics, is studied using a pseudo-spectral time-domain (PSTD) algorithm. Time domain electric fields and frequency domain propagation characteristics of both single and periodic dielectric slab...

  8. Large negative Goos-Hänchen shift from a weakly absorbing dielectric slab.

    Science.gov (United States)

    Wang, Li-Gang; Chen, Hong; Zhu, Shi-Yao

    2005-11-01

    It is theoretically shown that the negative Goos-Hänchen shifts near resonance, Re[k(z)d] = m pi, can be an order of magnitude larger than the wavelength for both TE- and TM-polarized beams reflected from a weakly absorbing dielectric slab if the absorption of the slab is sufficiently weak, which is different from the case for a lossless dielectric slab [Phys. Rev. Lett. 91, 133903 (2003)].

  9. Floating dielectric slab optical interconnection between metal-dielectric interface surface plasmon polariton waveguides.

    Science.gov (United States)

    Kang, Minsu; Park, Junghyun; Lee, Il-Min; Lee, Byoungho

    2009-01-19

    A simple and effective optical interconnection which connects two distanced single metal-dielectric interface surface plasmon waveguides by a floating dielectric slab waveguide (slab bridge) is proposed. Transmission characteristics of the suggested structure are numerically studied using rigorous coupled wave analysis, and design rules based on the study are given. In the wave-guiding part, if the slab bridge can support more than the fundamental mode, then the transmission efficiency of the interconnection shows strong periodic dependency on the length of the bridge, due to the multi-mode interference (MMI) effect. Otherwise, only small fluctuation occurs due to the Fabry-Pérot effect. In addition, light beating happens when the slab bridge is relatively short. In the wave-coupling part, on the other hand, gap-assisted transmission occurs at each overlapping region as a consequence of mode hybridization. Periodic dependency on the length of the overlap region also appears due to the MMI effect. According to these results, we propose design principles for achieving both high transmission efficiency and stability with respect to the variation of the interconnection distance, and we show how to obtain the transmission efficiency of 68.3% for the 1mm-long interconnection.

  10. Nonmonotoic fluctuation-induced interactions between dielectric slabs carrying charge disorder.

    Science.gov (United States)

    Sarabadani, Jalal; Naji, Ali; Dean, David S; Horgan, Ron R; Podgornik, Rudolf

    2010-11-07

    We investigate the effect of monopolar charge disorder on the classical fluctuation-induced interactions between randomly charged net-neutral dielectric slabs and discuss various generalizations of recent results [A. Naji et al., Phys. Rev. Lett. 104, 060601 (2010)] to highly inhomogeneous dielectric systems with and without statistical disorder correlations. We shall focus on the specific case of two generally dissimilar plane-parallel slabs, which interact across vacuum or an arbitrary intervening dielectric medium. Monopolar charge disorder is considered to be present on the bounding surfaces and/or in the bulk of the slabs, may be in general quenched or annealed and may possess a finite lateral correlation length reflecting possible "patchiness" of the random charge distribution. In the case of quenched disorder, the bulk disorder is shown to give rise to an additive long-range contribution to the total force, which decays as the inverse distance between the slabs and may be attractive or repulsive depending on the dielectric constants of the slabs. By contrast, the force induced by annealed disorder in general combines with the underlying van der Waals forces in a nonadditive fashion, and the net force decays as an inverse cube law at large separations. We show, however, that in the case of two dissimilar slabs, the net effect due to the interplay between the disorder-induced and the pure van der Waals interactions can lead to a variety of unusual nonmonotonic interaction profiles between the dielectric slabs. In particular, when the intervening medium has a larger dielectric constant than the two slabs, we find that the net interaction can become repulsive and exhibit a potential barrier, while the underlying van der Waals force is attractive. On the contrary, when the intervening medium has a dielectric constant between that of the two slabs, the net interaction can become attractive and exhibit a free energy minimum, while the pure van der Waals force is

  11. SLAB symmetric dielectric micron scale structures for high gradient electron acceleration.

    Energy Technology Data Exchange (ETDEWEB)

    Rosenzweig, J. B.; Schoessow, P. V.

    1999-06-12

    A class of planar microstructure is proposed which provide high accelerating gradients when excited by an infrared laser pulse. These structures consist of parallel dielectric slabs separated by a vacuum gap; the dielectric or the outer surface coating are spatially modulated at the laser wavelength along the beam direction so as to support a standing wave accelerating field. We have developed numerical and analytic models of the accelerating mode fields in the structure. We show an optimized coupling scheme such that this mode is excited resonantly with a large quality factor. The status of planned experiments on fabricating and measuring these planar structures will be described.

  12. Comparison of the sensitivity of air and dielectric modes in photonic crystal slab sensors.

    Science.gov (United States)

    Tomljenovic-Hanic, Snjezana; Rahmani, Adel; Steel, M J; de Sterke, C Martijn

    2009-08-17

    Optical cavities provide a route to sensing through the shift of the optical resonant peak. However, effective sensing with optical cavities requires the optimization of the modal quality factor, Q, and the field overlap with the sample, f. For a photonic crystal slab (PCS) this figure of merit, M = fQ, involves two competing effects. The air modes usually have large f but small Q, whereas the dielectric modes have high-Q and small f. We compare the sensitivity of air and dielectric modes for different PCS cavity designs and account for loss associated with absorption by the sensed sample or its host liquid. We find that optimizing Q at the expense of f is the most beneficial strategy, and modes deriving from the dielectric bands are thus preferred.

  13. Heat Transmission of Slab-on-Ground Industrial Floors with Vertical Perimeter Insulation

    OpenAIRE

    Kocsis, Lajos

    2013-01-01

    The surface heat loss of slab-on-ground industrial floors that are vertically insulated along the footing wall (with the insulation reaching under the ground level), is closely linked with the relatively large floor area of industrial halls. To give a comprehensive heat transmission analysis, the present paper first provides an overview of the U-value requirements for such floors in Hungary and Germany. For the determination of the heat transmission coefficient of slab-on-ground floors with v...

  14. The Theory for the Dielectric Slab Waveguide with Complex Refractive Index Applied to GaAs Lasers

    DEFF Research Database (Denmark)

    Buus, Jens

    1977-01-01

    In this paper we investigate the homogeneous dielectric slab waveguide in the case of complex dielectric constants. A method for calculating the field distribution in a dielectric waveguide with an arbitrary symmetrical variation in the refractive index is developed, and some of the results...... are presented. The results are applied to the GaAs laser. It is fonud that the guiding mechanism is a combination of gain guiding and index antiguiding. Based on the calculations an explanation of the kinks on the light current characteristics is suggested....

  15. Parity-time symmetry from stacking purely dielectric and magnetic slabs

    CERN Document Server

    Gear, James; Chu, S T; Rotter, Stefan; Li, Jensen

    2015-01-01

    We show that Parity-time symmetry in matching electric permittivity to magnetic permeability can be established by considering an effective Parity operator involving both mirror symmetry and coupling between electric and magnetic fields. This approach extends the discussion of Parity-time symmetry to the situation with more than one material potential. We show that the band structure of a one-dimensional photonic crystal with alternating purely dielectric and purely magnetic slabs can undergo a phase transition between propagation modes and evanescent modes when the balanced gain/loss parameter is varied. The cross-matching between different material potentials also allows exceptional points of the constitutive matrix to appear in the long wavelength limit where they can be used to construct ultrathin metamaterials with unidirectional reflection.

  16. Optimal width of quasicrystalline slabs of dielectric cylinders to microwave radiation transmission contrast

    Science.gov (United States)

    Andueza, Ángel; Wang, Kang; Pérez-Conde, Jesús; Sevilla, Joaquín

    2016-08-01

    Light confinement induced by resonant states in aperiodic photonic structures is interesting for many applications. A particular case of these resonances can be found in 2D quasicrystalline arrangements of dielectric cylinders. These systems present a rather isotropic band gap as well as isolated in-gap photonic states (as a result of spatially localized resonances). These states are built by high symmetry polygonal clusters that can be regarded as photonic molecules. In this paper, we study the transmission properties of a slab of glass cylinders arranged in approximants of the decagonal quasicrystalline structure. In particular, we investigate the influence of the slab width in the transmission contrast between the states and the gap. The study is both experimental and numerical in the microwave regime. We find that the best transmission contrast is found for a width of around three times the radiation wavelength. The transmission in the band gap region is mediated by the resonances of the photonic molecules. If the samples are thin enough, they become transparent except around a resonance of the photonic molecule which reflects the incoming light.

  17. Optimal width of quasi-crystalline slabs of dielectric cylinders to light transmission contrast

    CERN Document Server

    Andueza, Angel; Perez-Conde, Jesus; Sevilla, Joaquin

    2016-01-01

    Light confinement induced by resonant states in aperiodic photonic structures are interesting for many applications. A particular case of these resonances can be found in 2D quasi-crystalline arrangements of dielectric cylinders. These systems present a rather isotropic band gap as well as isolated in-gap photonic states (as a result of spatially localized resonances). These states are built by high symmetry polygonal clusters that can be regarded as photonic molecules. In this paper we study the transmission properties of a slab of glass cylinders arranged in approximants of decagonal quasi-crystalline structure. In particular, we investigate the influence of the slab width in the transmission contrast between the states and the gap. The study is both experimental and numerical in the microwave regime. We find that the best transmission contrast is found for a width of around 3 times the radiation wavelength. The transmission at the band gap region is mediated by the resonances of the photonic molecules. If ...

  18. Ground Source Heat Pump Sub-Slab Heat Exchange Loop Performance in a Cold Climate

    Energy Technology Data Exchange (ETDEWEB)

    Mittereder, N.; Poerschke, A.

    2013-11-01

    This report presents a cold-climate project that examines an alternative approach to ground source heat pump (GSHP) ground loop design. The innovative ground loop design is an attempt to reduce the installed cost of the ground loop heat exchange portion of the system by containing the entire ground loop within the excavated location beneath the basement slab. Prior to the installation and operation of the sub-slab heat exchanger, energy modeling using TRNSYS software and concurrent design efforts were performed to determine the size and orientation of the system. One key parameter in the design is the installation of the GSHP in a low-load home, which considerably reduces the needed capacity of the ground loop heat exchanger. This report analyzes data from two cooling seasons and one heating season. Upon completion of the monitoring phase, measurements revealed that the initial TRNSYS simulated horizontal sub-slab ground loop heat exchanger fluid temperatures and heat transfer rates differed from the measured values. To determine the cause of this discrepancy, an updated model was developed utilizing a new TRNSYS subroutine for simulating sub-slab heat exchangers. Measurements of fluid temperature, soil temperature, and heat transfer were used to validate the updated model.

  19. Ground Source Heat Pump Sub-Slab Heat Exchange Loop Performance in a Cold Climate

    Energy Technology Data Exchange (ETDEWEB)

    Mittereder, Nick [IBACOS, Inc., Pittsburgh, PA (United States); Poerschke, Andrew [IBACOS, Inc., Pittsburgh, PA (United States)

    2013-11-01

    This report presents a cold-climate project that examines an alternative approach to ground source heat pump (GSHP) ground loop design. The innovative ground loop design is an attempt to reduce the installed cost of the ground loop heat exchange portion of the system by containing the entire ground loop within the excavated location beneath the basement slab. Prior to the installation and operation of the sub-slab heat exchanger, energy modeling using TRNSYS software and concurrent design efforts were performed to determine the size and orientation of the system. One key parameter in the design is the installation of the GSHP in a low-load home, which considerably reduces the needed capacity of the ground loop heat exchanger. This report analyzes data from two cooling seasons and one heating season.

  20. Optical bistability and multistability driven by external magnetic field in a dielectric slab doped with nanodiamond nitrogen vacancy centres

    Science.gov (United States)

    Nasehi, R.; Norouzi, F.

    2016-08-01

    The theoretical investigation of controlling the optical bistability (OB) and optical multistability (OM) in a dielectric medium doped with nanodiamond nitrogen vacancy centres under optical excitation are reported. The shape of the OB curve from dielectric slab can be tuned by changing the external magnetic field and polarization of the control beam. The effect of the intensity of the control laser field and the frequency detuning of probe laser field on the OB and OM behaviour are also discussed in this paper. The results obtained can be used for realizing an all-optical bistable switching or development of nanoelectronic devices.

  1. Three-dimensional phase transformation by impedance-matched dielectric slabs and generation of hollow beams based on transformation optics

    Science.gov (United States)

    Wang, Lei; Yang, Shuaisai; Tang, Zhixiang; Shu, Weixing

    2016-10-01

    We propose a three-dimensional (3D) phase transformation method by an impedance-matched dielectric slab and apply it to generating hollow beams. We first employ transformation optics to establish a method for the transformation between two arbitrary 3D wavefronts through a flat dielectric and impedance-matched material. Then the method is used to convert a solid beam into a hollow beam with desired wavefront. By tuning the transformation surface, different hollow beams can be produced. The results are further validated by 3D finite-difference time-domain simulations.

  2. The thermal performance of ground floor slabs - a full scale in-situ experiment

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, H.R.; Rees, S.W. [Cardiff School of Engineering (United Kingdom). Geoenvironmental Engineering Research Centre

    1999-03-01

    A detailed description of a comprehensive in-situ experiment designed to monitor the thermal performance of real ground floor slabs is presented. In particular, the experiment was installed at the time of construction of a modern commercial building and subsequently monitored continuously for a one and a half year period. A detailed account of the design of the experiment and the instrumentation used is provided. Results achieved include transient variations of heat flux through the floor slab, air temperature, ground temperature and ground moisture content. Automatic electronic data logging enabled readings to be taken at thirty minute intervals from most instruments. Therefore both the seasonal and diurnal response of the system were observed. Significant differences in summer and winter heat transfer processes are revealed. The results also show that ground temperature and moisture content may change significantly near the external wall of the building. Underneath the building, temperature and moisture content variations were relatively small. Therefore the presence of an edge effect near the outer boundary wall of the building is revealed. The ability of the ground to act as a thermal store is also indicated by the measured data. The thermal response of two ground floor slabs is presented. The first was constructed of normal weight concrete and the second of light weight concrete. The insulating effect of the light weight concrete is evident from the results obtained. The measured thermal data has been used to determine thermal transmittance values for each floor slab considered. These values have been compared to values calculated adopting the approach outlined in current design guides. In conclusion, the U value calculated using the CIBSE guide was almost identical with the measured value for the normal weight concrete floor slab. However, the method could not be directly applied to the light weight concrete slab. The U-values calculated using the CEN draft

  3. Correspondence Between Oscillations and Emitted Photon Closed-Orbits in Spontaneous Emission Rate of an Atom Near a Dielectric Slab

    Institute of Scientific and Technical Information of China (English)

    YUN Su-Jun; WANG Fu-He; ZHOU Yun-Song; DU Meng-Li

    2007-01-01

    We study the oscillations in the spontaneous emission rate of an atom near a dielectric slab. The emission rate is calculated as a function of system size using quantum electrodynamics. It exhibits multi-periodic oscillations.Four frequencies of the oscillations are extracted by Fourier transforms. They agree with actions of photon closed-orbits going away and returning to the atom. These oscillations are explained as manifestations of quantum interference effects between the emitted photon wave near the atom and the returning photon waves travelling along various closed-orbits.

  4. Surface-plasmon-polariton waves guided by the uniformly moving planar interface of a metal film and dielectric slab

    CERN Document Server

    Mackay, Tom G

    2010-01-01

    We explored the effects of relative motion on the excitation of surface-plasmon-polariton (SPP) waves guided by the planar interface of a metal film and a dielectric slab, both materials being isotropic and homogeneous. Electromagnetic phasors in moving and non-moving reference frames were related directly using the corresponding Lorentz transformations. Our numerical studies revealed that, in the case of a uniformly moving dielectric slab, the angle of incidence for SPP-wave excitation is highly sensitive to (i) the ratio $\\beta$ of the speed of motion to speed of light in free space and (ii) the direction of motion. When the direction of motion is parallel to the plane of incidence, the SPP wave is excited by $p$-polarized (but not $s$-polarized) incident plane waves for low and moderate values of $\\beta$, while at higher values of $\\beta$ the total reflection regime breaks down. When the direction of motion is perpendicular to the plane of incidence, the SPP wave is excited by $p$-polarized incident plane ...

  5. Photonic bands and defect modes in metallo-dielectric photonic crystal slabs

    CERN Document Server

    Zanotto, Simone; Sorba, Lucia; Tredicucci, Alessandro

    2016-01-01

    Photonic components based on structured metallic elements show great potential for device applications where field enhancement and confinement of the radiation on a subwavelength scale is required. In this paper we report a detailed study of a prototypical metallo-dielectric photonic structure, where features well known in the world of dielectric photonic crystals, like band gaps and defect modes, are exported to the metallic counterpart, with interesting applications to infrared science and technology, as for instance in quantum well infrared photodetectors, narrow-band spectral filters, and tailorable thermal emitters.

  6. Analysis of Absorption Characteristics of Conductor-Grounded Lossy Dielectric Periodic Structures by Oblique Incidence

    Institute of Scientific and Technical Information of China (English)

    YANG Li; XU Shanjia

    2001-01-01

    The absorption characteristics oflossy dielectric periodic structures by an oblique in-cidence are analyzed using a method, which combinesthe Multimode Network Theory with the RigorousMode Matching Method. The periodic structures areconductor-grounded and can have arbitrary grooveprofiles. Extensive numerical results are given in thepaper to provide the theoretical predictions for a novelapplication of lossy dielectric periodic structure as thecover of the stealth.

  7. An ultra-wideband dielectric material characterization method using grounded coplanar waveguide and genetic algorithm optimization

    Science.gov (United States)

    Hadjloum, Massinissa; El Gibari, Mohammed; Li, Hongwu; Daryoush, Afshin S.

    2015-10-01

    An ultra-wideband complex permittivity extraction method is reported here using numerical fitting of scattering parameters to measured results. A grounded coplanar waveguide transmission line is realized on an unknown dielectric material, whose dielectric constant and loss tangent are extracted by the best fitting of the simulated magnitude, |S21|, and phase, ϕ21, of forward scattering parameter using an electromagnetic full-wave simulator (high frequency structure simulator) to the measured results. The genetic algorithm is employed for optimum rapid extraction, where errors between the numerically simulated and measured S21 (|S21| and ϕ21) are minimized in an iterative manner. As long as the convergence criterion is not satisfied, modifications to dielectric properties are made with this genetic algorithm implemented in Matlab. Feasibility of this extraction technique is validated on benzocyclobutane polymer from 10 MHz to 40 GHz.

  8. Temperature distributions in pavement and bridge slabs heated by using vertical ground-source heat pump systems - doi: 10.4025/actascitechnol.v35i4.15712

    Directory of Open Access Journals (Sweden)

    Asım Balbay

    2013-10-01

    Full Text Available Temperature distribution which occurs in pavement and bridge slabs heated for de-icing and snow melting during cold periods is determined by using vertical ground-source heat pump (GSHP systems with U-tube ground heat exchanger (GHE. The bridge and pavement models (slabs for de-icing and snow melting were constructed. A three-dimensional finite element model (FEM was developed to simulate temperature distribution of bridge slab (BS and pavement slab (PS. The temperature distribution simulations of PS and BS were conducted numerically by computational fluid dynamics (CFD program named ‘Fluent’. Congruence between the simulations and experimental data was determined.   

  9. Quantification of Vapor Intrusion Pathways into a Slab-on-Ground Building: an Integration of Mathematical Modeling and Field Experiments

    Science.gov (United States)

    Li, Y.; Akbariyeh, S.; Patterson, B.

    2014-12-01

    Vapor intrusion of volatile organic compounds into buildings can be a significant source of human exposure to hazardous materials. Field assessment is essential to evaluate the vapor intrusion pathways, which has been recognized to be challenging due to the heterogeneity of sites and uncontrolled site environments. Modeling of vapor intrusion processes can predict subsurface vapor and oxygen concentrations and indoor air concentration under various environmental site conditions. However, detailed experimental quantification for model validation is typically unavailable. In this work, we report our efforts to quantifying vapor intrusion pathways into a slab-on-ground building by integrating mathematical modeling with well-controlled field measurements under three different pressure and ventilation site conditions. Comparisons between modeling and field measurements include indoor air concentration, contaminant and oxygen distribution profile beneath and inside the building, diffusive and advective flux under different pressure and air vitalization conditions. In addition to typically identified key factors influencing vapor intrusion (e.g. the building construction, the properties of compounds, and depth to the source), we found several additional parameters, such as anisotropic property of surface soil, locations of crack, and dependency of reaction rates on oxygen concentration, are critical to evaluate vapor intrusion pathways.

  10. Effects of Dielectric Substrates and Ground Planes on Resonance Frequency of Archimedean Spirals.

    Science.gov (United States)

    Hooker, Jerris W; Ramaswamy, Vijaykumar; Arora, Rajendra K; Edison, Arthur S; Brey, William W

    2016-04-01

    Superconducting self-resonant spiral structures are of current interest for applications both in metamaterials and as probe coils for nuclear magnetic resonance (NMR) spectroscopy for high-sensitivity chemical analysis. Accurate spiral models are available in the literature for behavior of a spiral below and up to self-resonance. However, knowledge of the higher modes is also important. We present the relationships between the spiral parameters and the multiple mode frequencies of single sided spirals on dielectric substrates as modeled by method of moments simulation. In the absence of a ground plane, we find that the mode frequency has a linear though not necessarily harmonic dependence on the mode number. The effect of a thick substrate can be approximated by an effective dielectric constant. But when the thickness is less than 20% of the spiral trace width (router - rinner) this approximation is no longer accurate. We have developed a simple empirical formula to predict the higher modes.

  11. EFFECT OF DIELECTRIC CONSTANT ON THE EXCITON GROUND STATE ENERGY OF CdSe QUANTUM DOTS

    Institute of Scientific and Technical Information of China (English)

    HUI PING

    2000-01-01

    The B-spline technique is used in the calculation of the exciton ground state energy based on the effective mass approximation (EMA) model.The exciton is confined in CdSe microspherical crystallites with a finite-height potential wall (dots).In this approach,(a) the wave function is allowed to penetrate to the outside of the dots; (b) the dielectric constants of the quantum dot and the surrounding material are considered to be different; and (c) the dielectric constant of the dots are size-dependent.The exciton energies as functions of radii of the dots in the range 0.5-3.5nm are calculated and compared with experimental and previous theoretical data.The results show that: (1) The exciton energy is convergent as the radius of the dot becomes very small.(2) A good agreement with the experimental data better than other theoretical results is achieved.(3) The penetration (or leaking) of the wave function and the difference of the dielectric constants in different regions are necessary for correcting the Coulomb interaction energy and reproducing experimental data.(4) The EMA model with B-spline technique can describe the status of excition confined in quantum dot very well.

  12. Sub-micron free-standing metal slabs with dielectric nano-voids of arbitrary shapes embedded beneath atomically-flat surface.

    Science.gov (United States)

    Kho, Kiang Wei; Shen, Zexiang; Olivo, Malini

    2011-05-23

    Thin metal slabs with plasmonic nano-voids buried within the skin depth (slab. By artificially varying the topography of the capping metal surface from ultra-smooth to moderately-rough, we show structural symmetricity in a nano-void-metal system can render the overall plasmonic responses becoming profoundly influenced by the surface smoothness. The current fabrication technique is thus of primary importance to the preparation of any kind of smooth nano-void-passivated metal slabs.

  13. Gain of double-slab Cherenkov free-electron laser

    Energy Technology Data Exchange (ETDEWEB)

    Li, D. [Institute for laser Technology, suita, Osaka 565-0871 (Japan)], E-mail: dazhi_li@hotmail.com; Huo, G. [Petroleum development center, Shengli Oilfield, SINOPEC, Dongying 257001 (China); Imasak, K. [Institute for laser Technology, suita, Osaka 565-0871 (Japan); Asakawa, M. [Department of pure and applied physics, Faculty of Engineering Science, Kansai University, Osaka 564-8680 (Japan)

    2009-07-21

    A formula is derived for the small-signal gain of a double-slab Cherenkov free-electron laser. The simplified model is composed of a rectangular wave-guide partially filled with two lined parallel dielectric slabs and a sheet electron beam. The theory describes the electron beam as a plasma dielectric moving between the two dielectric slabs. With the help of hydrodynamic approximation, we derived the dispersion equation and the formula of small-signal gain. Through numerical computing, we studied an ongoing experiment of double-slab Cherenkov free-electron laser, and worked out the synchronous frequency and single-pass gain.

  14. Passive Microwave Soil Moisture Retrieval through Combined Radar/Radiometer Ground Based Simulator with Special Reference to Dielectric Schemes

    Science.gov (United States)

    Srivastava, Prashant K., ,, Dr.; O'Neill, Peggy, ,, Dr.

    2014-05-01

    Soil moisture is an important element for weather and climate prediction, hydrological sciences, and applications. Hence, measurements of this hydrologic variable are required to improve our understanding of hydrological processes, ecosystem functions, and the linkages between the Earth's water, energy, and carbon cycles (Srivastava et al. 2013). The retrieval of soil moisture depends not only on parameterizations in the retrieval algorithm but also on the soil dielectric mixing models used (Behari 2005). Although a number of soil dielectric mixing models have been developed, testing these models for soil moisture retrieval has still not been fully explored, especially with SMAP-like simulators. The main objective of this work focuses on testing different dielectric models for soil moisture retrieval using the Combined Radar/Radiometer (ComRAD) ground-based L-band simulator developed jointly by NASA/GSFC and George Washington University (O'Neill et al., 2006). The ComRAD system was deployed during a field experiment in 2012 in order to provide long active/passive measurements of two crops under controlled conditions during an entire growing season. L-band passive data were acquired at a look angle of 40 degree from nadir at both horizontal & vertical polarization. Currently, there are many dielectric models available for soil moisture retrieval; however, four dielectric models (Mironov, Dobson, Wang & Schmugge and Hallikainen) were tested here and found to be promising for soil moisture retrieval (some with higher performances). All the above-mentioned dielectric models were integrated with Single Channel Algorithms using H (SCA-H) and V (SCA-V) polarizations for the soil moisture retrievals. All the ground-based observations were collected from test site-United States Department of Agriculture (USDA) OPE3, located a few miles away from NASA GSFC. Ground truth data were collected using a theta probe and in situ sensors which were then used for validation. Analysis

  15. Oblique incidence of semi-guided waves on step-like folds in planar dielectric slabs: Lossless vertical interconnects in 3D integrated photonic circuits

    Science.gov (United States)

    Hildebrandt, Andre; Alhaddad, Samer; Hammer, Manfred; Förstner, Jens

    2016-02-01

    Semi-guided light propagation across linear folds of slab waveguides is being considered. Radiation losses vanish beyond certain critical angles of incidence, as can be understood by arguments resembling Snell's law. One thus realizes lossless propagation through 90-degree corner configurations, where the remaining guided waves are still subject to pronounced reflection and polarization conversion. A step-like system of two of these sharp corners can then be viewed as a system akin to a Fabry-Perot interferometer, with two partial reflectors at a distance given by the vertical separation of the slab cores. The respective resonance effect enables full transmission of semiguided, laterally plane waves through the step structures. One obtains a configuration that optically connects guiding layers at different elevation levels in a 3-D integrated optical chip, without radiation losses, over large distances, and reasonably broadband. We show rigorous quasi-analytical results for typical high-contrast Si/SiO2 structures. Although the full-transmission effect requires a symmetric system, here realized by slab waveguides with a silicon core sandwiched between thick silica substrate and cover layers, simulations for configurations with air cover show that a certain asymmetry can well be afforded.

  16. Numerical analysis of complex impedance and microwave absorption of metamaterials composed of split cut wires on grounded dielectric substrate

    Science.gov (United States)

    Lim, Jun-Hee; Liu, Tian; Kim, Sung-Soo

    2014-06-01

    The microwave absorption of metamaterials composed of split cut wire (SCW) on grounded dielectric substrate has been investigated on the basis of equivalent transmission line circuit. S-parameters (S 11 and S 21) and input impedance are numerically simulated with variations of the thickness and dielectric loss of the substrate and the geometry of the SCW. Magnetic resonance resulting from antiparallel currents between SCW and ground plane was observed at the frequency of minimum reflection loss. The simulated resonance frequency and reflection loss can be explained well on the basis of the circuit theory of an LC resonator. Analysis of the input impedance of the high impedance surface has shown that perfect absorption can be obtained at the optimized impedance-matching condition, which is dependent on SCW width, thickness and the dielectric loss of the substrate. Better insight into the absorption mechanism of metamaterial absorbers can be attained through the parametric analysis on complex impedance of SCW and its relationship with reflection loss.

  17. A Study of Concrete Hydration and Dielectric Relaxation Mechanism Using Ground Penetrating Radar and Short-Time Fourier Transform

    Directory of Open Access Journals (Sweden)

    Lai WL

    2010-01-01

    Full Text Available Abstract Ground penetrating radar (GPR was used to characterize the frequency-dependent dielectric relaxation phenomena in ordinary Portland cement (OPC hydration in concrete changing from fresh to hardened state. The study was experimented by measuring the changes of GPR A-scan waveforms over a period of 90 days, and processed the waveforms with short-time Fourier transform (STFT in joint time-frequency analysis (JTFA domain rather than a conventional time or frequency domain alone. The signals of the direct wave traveled at the concrete surface and the reflected wave from an embedded steel bar were transformed with STFT, in which the changes of peak frequency over ages were tracked. The peak frequencies were found to increase with ages and the patterns were found to match closely with primarily the well-known OPC hydration process and secondarily, the evaporation effect. The close match is contributed to the simultaneous effects converting free to bound water over time, on both conventional OPC hydration and dielectric relaxation mechanisms.

  18. Dielectric Resonator Antenna Mounted on Cylindrical Ground Plane for Handheld RFID Reader at 5.8 GHz

    Directory of Open Access Journals (Sweden)

    Hend Abd El-Azem Malhat

    2012-10-01

    Full Text Available Dielectric resonator antenna (DRA mounted on cylindrical ground plane is investigated for handheld RFID reader applications at 5.8 GHz. The simplicity of the structure makes it practical in terms of cost, space, and ease of fabrication. The radiation characteristics of the antenna in free space and in the presence of a proposed compact reader device model and human hand are calculated. The antenna is circularly polarized and exhibits peak gain of 7.62 dB at 5.8 GHz with high front to back ratio of 15.5 dB. Using the same reader device model, a sequentially feeding 2×2 DRA array mounted on the same cylindrical ground plane is used for RFID reader antenna at 5.8 GHz. The array introduces high gain of 9.36 dB at 5.8 GHz with high front to back ratio of 10.48 dB. The 2×2 DRA array elements exhibit circular polarization over a frequency band of 1.1 GHz. The axial ratio is 1.1 dB at 5.8 GHz. The proposed reader model is simple and has a small size compared with that in the case of planar ground plane. The results are calculated using the finite element method (FEM and compared with that calculated using the finite integral technique (FIT.

  19. Novel Radon Sub-Slab Suctioning System

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2013-01-01

    the zone below the ground-floor construction. For this purpose a new system of prefabricated lightweight elements is introduced. The effectiveness of the system is demonstrated for the case of a ground-floor reinforced concrete slab situated on top of a rigid insulation layer (consisting of a thermal......A new principle for radon protection is currently presented which makes use of a system of horizontal pressurised air ducts located within the lower part of the rigid insulation layer of the ground-floor slab. The function of this system is based on the principles of pressure reduction within...... a grid of horizontal air ducts with low pressure which are able to remove air and radon from the ground. Results showed the system to be effective in preventing radon infiltrating from the ground through the ground-floor slab, avoiding high concentrations of radon being accumulated inside houses...

  20. Antenna with Dielectric Having Geometric Patterns

    Science.gov (United States)

    Dudley, Kenneth L. (Inventor); Elliott, Holly A. (Inventor); Cravey, Robin L. (Inventor); Connell, John W. (Inventor); Ghose, Sayata (Inventor); Watson, Kent A. (Inventor); Smith, Jr., Joseph G. (Inventor)

    2013-01-01

    An antenna includes a ground plane, a dielectric disposed on the ground plane, and an electrically-conductive radiator disposed on the dielectric. The dielectric includes at least one layer of a first dielectric material and a second dielectric material that collectively define a dielectric geometric pattern, which may comprise a fractal geometry. The radiator defines a radiator geometric pattern, and the dielectric geometric pattern is geometrically identical, or substantially geometrically identical, to the radiator geometric pattern.

  1. Dielectric Resonator Metasurface for Dispersion Engineering

    CERN Document Server

    Achouri, Karim; Gupta, Shulabh; Rmili, Hatem; Caloz, Christophe

    2016-01-01

    We introduce a practical dielectric metasurface design for microwave frequencies. The metasurface is made of an array of dielectric resonators held together by dielectric connections thus avoiding the need of a mechanical support in the form of a dielectric slab and the spurious multiple reflections that such a slab would generate. The proposed design can be used either for broadband metasurface applications or monochromatic wave transformations. The capabilities of the concept to manipulate the transmission phase and amplitude of the metasurface are supported by numerical and experimental results. Finally, a half-wave plate and a quarter-wave plate have been realized with the proposed concept.

  2. Broadband high reflectivity in subwavelength-grating slab waveguides

    CERN Document Server

    Cui, Xuan; Zhou, Zhongxiang

    2015-01-01

    We computationally study a subwavelength dielectric grating structure, show that slab waveguide modes can be used to obtain broadband high reflectivity, and analyze how slab waveguide modes influence reflection. A structure showing interference between Fabry-Perot modes, slab waveguide modes, and waveguide array modes is designed with ultra-broadband high reflectivity. Owing to the coupling of guided modes, the region with reflectivity R > 0.99 has an ultra-high bandwidth ( {\\Delta}f/f > 30%). The incident-angle region with R > 0.99 extends over a range greater than 40{\\deg}. Moreover, an asymmetric waveguide structure is studied using a semiconductor substrate.

  3. On Casimir Forces for Media with Arbitrary Dielectric Properties

    CERN Document Server

    Mochán, W L; Esquivel-Sirvent, R

    2002-01-01

    We derive an expression for the Casimir force between slabs with arbitrary dielectric properties characterized by their reflection coefficients. The formalism presented here is applicable to media with a local or a non-local dielectric response, an infinite or a finite width, inhomogeneous dissipative, etc. Our results reduce to the Lifshitz formula for the force between semi-infinite dielectric slabs by replacing the reflection coefficients by the Fresnel amplitudes.

  4. Radon Sub-slab Suctioning System Integrated in Insulating Layer

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    This poster presents a new radon sub-slab suctioning system. This system makes use of a grid of horizontal pressurised air ducts located within the lower part of the rigid insulation layer of the ground floor slab. For this purpose a new system of prefabricated lightweight elements is introduced...

  5. Ground state energy and wave function of an off-centre donor in spherical core/shell nanostructures: Dielectric mismatch and impurity position effects

    Energy Technology Data Exchange (ETDEWEB)

    Ibral, Asmaa [Equipe d’Optique et Electronique du Solide, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B.P. 20 El Jadida Principale, El Jadida 24000 (Morocco); Laboratoire d’Instrumentation, Mesure et Contrôle, Département de Physique, Université Chouaïb Doukkali, B.P. 20 El Jadida Principale, El Jadida (Morocco); Zouitine, Asmae [Département de Physique, Ecole Nationale Supérieure d’Enseignement Technique, Université Mohammed V Souissi, B.P. 6207 Rabat-Instituts, Rabat (Morocco); Assaid, El Mahdi, E-mail: eassaid@yahoo.fr [Equipe d’Optique et Electronique du Solide, Département de Physique, Faculté des Sciences, Université Chouaïb Doukkali, B.P. 20 El Jadida Principale, El Jadida 24000 (Morocco); Laboratoire d’Instrumentation, Mesure et Contrôle, Département de Physique, Université Chouaïb Doukkali, B.P. 20 El Jadida Principale, El Jadida (Morocco); Feddi, El Mustapha [Département de Physique, Ecole Nationale Supérieure d’Enseignement Technique, Université Mohammed V Souissi, B.P. 6207 Rabat-Instituts, Rabat (Morocco); and others

    2014-09-15

    Ground state energy and wave function of a hydrogen-like off-centre donor impurity, confined anywhere in a ZnS/CdSe spherical core/shell nanostructure are determined in the framework of the envelope function approximation. Conduction band-edge alignment between core and shell of nanostructure is described by a finite height barrier. Dielectric constant mismatch at the surface where core and shell materials meet is taken into account. Electron effective mass mismatch at the inner surface between core and shell is considered. A trial wave function where coulomb attraction between electron and off-centre ionized donor is used to calculate ground state energy via the Ritz variational principle. The numerical approach developed enables access to the dependence of binding energy, coulomb correlation parameter, spatial extension and radial probability density with respect to core radius, shell radius and impurity position inside ZnS/CdSe core/shell nanostructure.

  6. Properties of leaky waves supported by grounded dielectric super-layers and implications on the design of reflector feeds

    NARCIS (Netherlands)

    Neto, A.; Llombart, N.; Gerini, G.; Bonnedal, M.; Maagt, P. de

    2007-01-01

    The design strategy that uses dielectric super-layers with neighboring wave-guides closed in matched loads constitutes a worst case scenario as far as the performance enhancement is concerned and finds applicability in radiometric imaging arrays. On the other side the design strategy that uses diele

  7. Properties of leaky waves supported by grounded dielectric super-layers and implications on the design of reflector feeds

    NARCIS (Netherlands)

    Neto, A.; Llombart, N.; Gerini, G.; Bonnedal, M.; Maagt, P. de

    2007-01-01

    The design strategy that uses dielectric super-layers with neighboring wave-guides closed in matched loads constitutes a worst case scenario as far as the performance enhancement is concerned and finds applicability in radiometric imaging arrays. On the other side the design strategy that uses diele

  8. Casimir Force on Real Materials - the Slab and Cavity Geometry

    CERN Document Server

    Ellingsen, S A; Brevik, Iver; Ellingsen, Simen A.

    2006-01-01

    We analyse the potential of the geometry of a slab in a planar cavity for the purpose of Casimir force experiments. The force and its dependence on temperature, material properties and finite slab thickness are investigated both analytically and numerically for slab and walls made of aluminium and teflon FEP respectively. We conclude that such a setup is ideal for measurements of the temperature dependence of the Casimir force. By numerical calculation it is shown that temperature effects are dramatically larger for dielectrics, suggesting that a dielectric such as teflon FEP whose properties vary little within a moderate temperature range, should be considered for experimental purposes. We finally discuss the subtle but fundamental matter of the various Green's two-point function approaches present in the literature and show how they are different formulations describing the same phenomenon.

  9. A modularized pulse forming line using glass-ceramic slabs.

    Science.gov (United States)

    Wang, Songsong; Shu, Ting; Yang, Hanwu

    2012-08-01

    In our lab, a kind of glass-ceramic slab has been chosen to study the issues of applying solid-state dielectrics to pulse forming lines (PFLs). Limited by the manufacture of the glass-ceramic bulk with large sizes, a single ceramic slab is hard to store sufficient power for the PFL. Therefore, a modularized PFL design concept is proposed in this paper. We regard a single ceramic slab as a module to form each single Blumlein PFL. We connect ceramic slabs in series to enlarge pulse width, and stack the ceramic Blumlein PFLs in parallel to increase the output voltage amplitude. Testing results of a single Blumlein PFL indicate that one ceramic slab contributes about 11 ns to the total pulse width which has a linear relation to the number of the ceramic slabs. We have developed a prototype facility of the 2-stage stacked Blumlein PFL with a length of 2 ceramic slabs. The PFL is dc charged up to 5 kV, and the output voltage pulse of 10 kV, 22 ns is measured across an 8 Ω load. Simulation and experiment results in good agreement demonstrate that the modularized design is reasonable.

  10. Leaky Modes of Dielectric Cavities

    CERN Document Server

    Mansuripur, Masud; Jakobsen, Per

    2016-01-01

    In the absence of external excitation, light trapped within a dielectric medium generally decays by leaking out (and also by getting absorbed within the medium). We analyze the leaky modes of a parallel-plate slab, a solid glass sphere, and a solid glass cylinder, by examining those solutions of Maxwell's equations (for dispersive as well as non-dispersive media) which admit of a complex-valued oscillation frequency. Under certain circumstances, these leaky modes constitute a complete set into which an arbitrary distribution of the electromagnetic field residing inside a dielectric body can be expanded. We provide completeness proofs, and also present results of numerical calculations that illustrate the relationship between the leaky modes and the resonances of dielectric cavities formed by a simple parallel-plate slab, a glass sphere, and a glass cylinder.

  11. Efficient evaluation of dielectric response functions and calculations of ground and excited state properties beyond local Density Functional approaches

    Science.gov (United States)

    Lu, Deyu; Li, Yan; Rocca, Dario; Viet Nguyen, H.; Gygi, Francois; Galli, Giulia

    2010-03-01

    A recently developed technique to diagonalize iteratively dielectric matrices [1], is used to carry out efficient, ab-initio calculations of dispersion interactions, and excited state properties of nanostructures. In particular, we present results for the binding energies of weakly bonded molecular crystals [2], obtained at the EXX/RPA level of theory, and for absorption spectra of semiconducting clusters, obtained by an iterative solution of the Bethe-Salpeter equations [3]. We show that the ability to obtain the eigenmodes of dielectric matrices from Density Functional perturbation theory, without computing single particle excited states, greatly improves the efficiency of both EXX/RPA and many body perturbation theory [3,4] calculations and opens the way to large scale computations. [1] H. Wilson, F. Gygi and G. Galli, Phys. Rev. B , 78, 113303, 2008; and H. Wilson, D. Lu, F. Gygi and G. Galli, Phys. Rev. B, 79, 245106, 2009. [2] D. Lu, Y. Li, D. Rocca and G. Galli, Phys. Rev. Lett, 102, 206411, 2009; and Y. Li, D. Lu, V. Nguyen and G. Galli, J. Phys. Chem. C (submitted) [3] D. Rocca, D. Lu and G. Galli, submitted. [4] D. Lu, F. Gygi and G. Galli, Phys. Rev. Lett. 100, 147601, 2008. Work was funded by DOE/Scidac DE-FC02-06ER25794 and DOE/BES DE-FG02-06ER46262.

  12. Electromagnetic fluctuation-induced interactions in randomly charged slabs

    Science.gov (United States)

    Rezvani, Vahid; Sarabadani, Jalal; Naji, Ali; Podgornik, Rudolf

    2012-09-01

    Randomly charged net-neutral dielectric slabs are shown to interact across a featureless dielectric continuum with long-range electrostatic forces that scale with the statistical variance of their quenched random charge distribution and inversely with the distance between their bounding surfaces. By accounting for the whole spectrum of electromagnetic field fluctuations, we show that this long-range disorder-generated interaction extends well into the retarded regime where higher order (non-zero) Matsubara frequencies contribute significantly. This occurs even for highly clean samples with only a trace amount of charge disorder and shows that disorder effects can be important down to the nanoscale. As a result, the previously predicted non-monotonic behavior for the total force between dissimilar slabs as a function of their separation distance is substantially modified by higher order contributions, and in almost all cases of interest, we find that the equilibrium inter-surface separation is shifted to substantially larger values compared to predictions based solely on the zero-frequency component. This suggests that the ensuing non-monotonic interaction is more easily amenable to experimental detection. The presence of charge disorder in the intervening dielectric medium between the two slabs is shown to lead to an additional force that can be repulsive or attractive depending on the system parameters and can, for instance, wash out the non-monotonic behavior of the total force when the intervening slab contains a sufficiently large amount of disorder charges.

  13. Electromagnetic fluctuation-induced interactions in randomly charged slabs.

    Science.gov (United States)

    Rezvani, Vahid; Sarabadani, Jalal; Naji, Ali; Podgornik, Rudolf

    2012-09-21

    Randomly charged net-neutral dielectric slabs are shown to interact across a featureless dielectric continuum with long-range electrostatic forces that scale with the statistical variance of their quenched random charge distribution and inversely with the distance between their bounding surfaces. By accounting for the whole spectrum of electromagnetic field fluctuations, we show that this long-range disorder-generated interaction extends well into the retarded regime where higher order (non-zero) Matsubara frequencies contribute significantly. This occurs even for highly clean samples with only a trace amount of charge disorder and shows that disorder effects can be important down to the nanoscale. As a result, the previously predicted non-monotonic behavior for the total force between dissimilar slabs as a function of their separation distance is substantially modified by higher order contributions, and in almost all cases of interest, we find that the equilibrium inter-surface separation is shifted to substantially larger values compared to predictions based solely on the zero-frequency component. This suggests that the ensuing non-monotonic interaction is more easily amenable to experimental detection. The presence of charge disorder in the intervening dielectric medium between the two slabs is shown to lead to an additional force that can be repulsive or attractive depending on the system parameters and can, for instance, wash out the non-monotonic behavior of the total force when the intervening slab contains a sufficiently large amount of disorder charges.

  14. Slab Leaf Bowls

    Science.gov (United States)

    Suitor, Cheryl

    2012-01-01

    In science class, fourth graders investigate the structure of plants and leaves from trees and how the process of photosynthesis turns sunlight into sugar proteins. In this article, the author fuses art and science for a creative and successful clay slab project in her elementary art classroom. (Contains 1 online resource.)

  15. Slab Leaf Bowls

    Science.gov (United States)

    Suitor, Cheryl

    2012-01-01

    In science class, fourth graders investigate the structure of plants and leaves from trees and how the process of photosynthesis turns sunlight into sugar proteins. In this article, the author fuses art and science for a creative and successful clay slab project in her elementary art classroom. (Contains 1 online resource.)

  16. Photonic-crystal slab for terahertz-wave technology platform

    Science.gov (United States)

    Fujita, Masayuki

    2016-03-01

    Photonic crystals manipulate photons in a manner analogous to solid-state crystals, and are composed of a dielectric material with a periodic refractive index distribution. In particular, two-dimensional photonic-crystal slabs with high index contrasts (semiconductor/air) are promising for practical applications, owing to the strong optical confinement in simple, thin planar structures. This paper presents the recent progress on a silicon photonic-crystal slab as a technology platform in the terahertz-wave region, which is located between the radio and light wave regions (0.1-10 THz). Extremely low-loss (edge effect are demonstrated. Terahertz photonic-crystal slabs hold the potential for developing ultralow-loss, compact terahertz components and integrated devices used in applications including wireless communication, spectroscopic sensing, and imaging.

  17. Dielectric non destructive testing for rock characterization in natural stone industry and cultural heritage

    Science.gov (United States)

    López-Buendía, Angel M.; García-Baños, Beatriz; Mar Urquiola, M.; Gutiérrez, José D.; Catalá-Civera, José M.

    2016-04-01

    Dielectric constant measurement has been used in rocks characterization, mainly for exploration objective in geophysics, particularly related to ground penetration radar characterization in ranges of 10 MHz to 1 GHz. However, few data have been collected for loss factor. Complex permittivity (dielectric constant and loss factor) characterization in rock provide information about mineralogical composition as well as other petrophysic parameters related to the quality, such as fabric parameters, mineralogical distribution, humidity. A study was performed in the frequency of 2,45GHz by using a portable kit for dielectric device based on an open coaxial probe. In situ measurements were made of natural stone marble and granite on selected industrial slabs and building stone. A mapping of their complex permittivity was performed and evaluated, and variations in composition and textures were identified, showing the variability with the mineral composition, metal ore minerals content and fabric. Dielectric constant was a parameter more sensible to rock forming minerals composition, particularly in granites for QAPF-composition (quartz-alkali feldspar-plagioclases-feldspathoids) and in marbles for calcite-dolomite-silicates. Loss factor shown a high sensibility to fabric and minerals of alteration. Results showed that the dielectric properties can be used as a powerful tool for petrographic characterization of building stones in two areas of application: a) in cultural heritage diagnosis to estimate the quality and alteration of the stone, an b) in industrial application for quality control and industrial microwave processing.

  18. Controlling the focusing properties of a triangular-lattice metallic photonic-crystal slab

    Institute of Scientific and Technical Information of China (English)

    Feng Shuai; Wang Yi-Quan; Li Zhi-Yuan; Cheng Bing-Ying; Zhang Dao-Zhong

    2007-01-01

    This paper studies the focusing properties of a two-dimensional photonic crystal (PC) slab consisting of a triangular lattice of metallic cylinders immersed in a dielectric background. Through the analysis of the equifrequency-surface contours and the field patterns of a point source placed in the vicinity of the PC slab, it finds that both the image distance and image quality can be controlled by simply adjusting the refractive index of the background material.

  19. Comparative Analysis of Guided Modal Properties of Double-Positive and Double-Negative Metamaterial Slab Waveguides

    Directory of Open Access Journals (Sweden)

    K. Y. Kim

    2009-06-01

    Full Text Available The guided modal properties of double-positive and double-negative metamaterial slab waveguides are numerically analyzed and compared when varying the dielectric and magnetic constants. As the cutoff frequencies of both slab waveguides remained unchanged when the absolute value of the refractive index was kept invariant, this enabled an effective comparison of the respective guided modes. Thus, the guided mode dispersion characteristics of the double-positive and double-negative slab waveguides were analyzed and compared, including several higher order modes. As a result, this comparative analysis provides greater physical insights and a better understanding of the guided modal characteristics of double-negative metamaterial slab waveguides.

  20. Negative Refraction and Near-Field Imaging of an Elliptical-Rod Photonic Crystal Slab in the Second Band

    Institute of Scientific and Technical Information of China (English)

    FENG Shuai; AO Ling; WANG Yi-Quan; LI Zhi-Yuan; ZHANG Dao-Zhong

    2007-01-01

    Negative refraction and imaging properties of the electromagnetic wave through a two-dimensional photonic crystal (PC) slab, which consists of a square lattice of elliptical dielectric rods immersed in the air background,is studied by the plane-wave expansion method and the finite-difference time-domain method. A point source placed in the vicinity of the PC slab can form a good-quality image spot through the PC slab for the incident frequencies within the second photonic band. The calculated result also shows that negative refraction occurs in this kind of PC slab.

  1. Radon Sub-slab Suctioning System Integrated in Insulating Layer

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2013-01-01

    of prefabricated lightweight elements were introduced and demonstrated. The principle was demonstrated on a concrete ground slab floor with a concrete slab on top of a thermal insulation layer above a capillary-breaking layer mounted on stable ground. The thermal insulation and the capillary-breaking layer...... consisted of a rigid insulation material. The new solution integrates the capillary-breaking layer and a pressure reduction zone,denoted the radon–suctioning layer, in one element. The new solution introduces the radonsuctioning layer as a horizontal grid of air ducts with low pressure to catch air...

  2. Highly efficient second-harmonic generation from indefinite epsilon-near-zero slabs of subwavelength thickness

    CERN Document Server

    Ciattoni, Alessandro

    2011-01-01

    We theoretically predict efficient optical second-harmonic generation (SHG) from a few hundred nanometer thick slab consisting of a quadratic nonlinear anisotropic medium whose linear principal permittivities are, at the fundamental wavelength, very small and have different signs (indefinite medium). We show that, by illuminating the slab with a p-polarized fundamental wave (with intensity of a few MW/cm^2), a highly efficient scattering of the second-harmonic field occurs when the conditions of linear complete slab transparency for the fundamental wave are met. The high efficiency of the SHG process, stems from the large non-plasmonic enhancement of the longitudinal field, perpendicular to the slab surface, produced by the very small value of the slab dielectric permittivities. A suitable nano-structured composite is proposed and numerically designed for observing the novel non-phase-matched and highly efficient SHG process from nano-structures.

  3. Half-disordered photonic crystal slabs.

    Science.gov (United States)

    Beque, V; Keilman, J; Citrin, D S

    2016-08-10

    Optical transmission spectra of finite-thickness slabs of two-dimensional triangular-lattice photonic crystals of air holes in a dielectric matrix with various concentrations of randomly located vacancies (absent air holes) are studied. We focus on structures in which only one half of the structure-the incidence or transmission side-is disordered. We find vacancy-induced scattering gives rise to a strong difference in the two cases; for light incident on the disordered side, high transmission within the photonic pseudogap at normal incidence is predicted, in strong contrast to the opposite case, where low transmission is predicted throughout the pseudogap, as is observed in the case of an ideal structure with no defects.

  4. Effects of N2O and O2 addition to nitrogen Townsend dielectric barrier discharges at atmospheric pressure on the absolute ground-state atomic nitrogen density

    KAUST Repository

    Es-sebbar, Et-touhami

    2012-11-27

    Absolute ground-state density of nitrogen atoms N (2p3 4S3/2) in non-equilibrium Townsend dielectric barrier discharges (TDBDs) at atmospheric pressure sustained in N2/N2O and N2/O2 gas mixtures has been measured using Two-photon absorption laser-induced fluorescence (TALIF) spectroscopy. The quantitative measurements have been obtained by TALIF calibration using krypton as a reference gas. We previously reported that the maximum of N (2p3 4S3/2) atom density is around 3 × 1014 cm-3 in pure nitrogen TDBD, and that this maximum depends strongly on the mean energy dissipated in the gas. In the two gas mixtures studied here, results show that the absolute N (2p3 4S3/2) density is strongly affected by the N2O and O2 addition. Indeed, the density still increases exponentially with the energy dissipated in the gas but an increase in N2O and O2 amounts (a few hundreds of ppm) leads to a decrease in nitrogen atom density. No discrepancy in the order of magnitude of N (2p3 4S3/2) density is observed when comparing results obtained in N2/N2O and N2/O2 mixtures. Compared with pure nitrogen, for an energy of ∼90 mJ cm-3, the maximum of N (2p3 4S3/2) density drops by a factor of 3 when 100 ppm of N2O and O2 are added and it reduces by a factor of 5 for 200 ppm, to reach values close to our TALIF detection sensitivity for 400 ppm (1 × 1013 cm -3 at atmospheric pressure). © 2013 IOP Publishing Ltd.

  5. Evidence for slab material under Greenland and links to Cretaceous High Arctic magmatism

    NARCIS (Netherlands)

    Shephard, G. E.; Trønnes, R. G.; Spakman, W.; Panet, I.; Gaina, C.

    2016-01-01

    Understanding the evolution of extinct ocean basins through time and space demands the integration of surface kinematics and mantle dynamics. We explore the existence, origin, and implications of a proposed oceanic slab burial ground under Greenland through a comparison of seismic tomography, slab s

  6. Topological Susceptibility from Slabs

    CERN Document Server

    Bietenholz, Wolfgang; Gerber, Urs

    2015-01-01

    In quantum field theories with topological sectors, a non-perturbative quantity of interest is the topological susceptibility chi_t. In principle it seems straightforward to measure chi_t by means of Monte Carlo simulations. However, for local update algorithms and fine lattice spacings, this tends to be difficult, since the Monte Carlo history rarely changes the topological sector. Here we test a method to measure chi_t even if data from only one sector are available. It is based on the topological charges in sub-volumes, which we denote as slabs. Assuming a Gaussian distribution of these charges, this method enables the evaluation of chi_t, as we demonstrate with numerical results for non-linear sigma-models.

  7. Three-dimensional periodic dielectric structures having photonic Dirac points

    Energy Technology Data Exchange (ETDEWEB)

    Bravo-Abad, Jorge; Joannopoulos, John D.; Soljacic, Marin

    2015-06-02

    The dielectric, three-dimensional photonic materials disclosed herein feature Dirac-like dispersion in quasi-two-dimensional systems. Embodiments include a face-centered cubic (fcc) structure formed by alternating layers of dielectric rods and dielectric slabs patterned with holes on respective triangular lattices. This fcc structure also includes a defect layer, which may comprise either dielectric rods or a dielectric slab with patterned with holes. This defect layer introduces Dirac cone dispersion into the fcc structure's photonic band structure. Examples of these fcc structures enable enhancement of the spontaneous emission coupling efficiency (the .beta.-factor) over large areas, contrary to the conventional wisdom that the .beta.-factor degrades as the system's size increases. These results enable large-area, low-threshold lasers; single-photon sources; quantum information processing devices; and energy harvesting systems.

  8. Building America Case Study: Simplified Air Distribution, Desuperheaters, and Sub-Slab Geothermal Heat Exchangers, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-08

    This report presents a cold-climate project that examines an alternative approach to ground source heat pump (GSHP) ground loop design. The innovative ground loop design is an attempt to reduce the installed cost of the ground loop heat exchange portion of the system by containing the entire ground loop within the excavated location beneath the basement slab.

  9. Building America Case Study: Simplified Air Distribution, Desuperheaters, and Sub-Slab Geothermal Heat Exchangers, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    N. Mittereder, A. Poerschke

    2017-05-01

    This report presents a cold-climate project that examines an alternative approach to ground source heat pump (GSHP) ground loop design. The innovative ground loop design is an attempt to reduce the installed cost of the ground loop heat exchange portion of the system by containing the entire ground loop within the excavated location beneath the basement slab.

  10. New Packaging for Amplifier Slabs

    Energy Technology Data Exchange (ETDEWEB)

    Riley, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thorsness, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Suratwala, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Steele, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rogowski, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-03-18

    The following memo provides a discussion and detailed procedure for a new finished amplifier slab shipping and storage container. The new package is designed to maintain an environment of <5% RH to minimize weathering.

  11. Optimization of reinforced concrete slabs

    Science.gov (United States)

    Ferritto, J. M.

    1979-01-01

    Reinforced concrete cells composed of concrete slabs and used to limit the effects of accidental explosions during hazardous explosives operations are analyzed. An automated design procedure which considers the dynamic nonlinear behavior of the reinforced concrete of arbitrary geometrical and structural configuration subjected to dynamic pressure loading is discussed. The optimum design of the slab is examined using an interior penalty function. The optimization procedure is presented and the results are discussed and compared with finite element analysis.

  12. Optimization of reinforced concrete slabs

    Science.gov (United States)

    Ferritto, J. M.

    1979-01-01

    Reinforced concrete cells composed of concrete slabs and used to limit the effects of accidental explosions during hazardous explosives operations are analyzed. An automated design procedure which considers the dynamic nonlinear behavior of the reinforced concrete of arbitrary geometrical and structural configuration subjected to dynamic pressure loading is discussed. The optimum design of the slab is examined using an interior penalty function. The optimization procedure is presented and the results are discussed and compared with finite element analysis.

  13. Local dielectric permittivity profiles of sapphire/polypropylene interfaces

    Science.gov (United States)

    Yu, Liping; Ranjan, V.; Buongiorno Nardelli, M.; Bernholc, J.

    2009-03-01

    Recently, the need for high-power-density capacitors has stimulated research to develop composite dielectric materials with high-k nanoparticles embedded in a polymer matrix. In these materials, surfaces and interfaces may play an important role in determining the overall dielectric properties. We present first-principles investigations of the dielectric permittivity profiles across slabs and interfaces of sapphire(α-Al2O3)/isotactic-polypropylene(iPP). Our results indicate that the permittivity profile at interface strongly depends on the nanoscale averaging procedure. We propose an averaging model that ensures near-locality of the dielectric function. We find that: (i) the dielectric permittivity approaches the corresponding bulk value just a few atomic layers away from the interface or surface; (ii) the dielectric constant is enhanced at the surfaces of the isolated α-Al2O3 slabs, while no enhancement is observed at the iPP slab surfaces; and (iii) the dielectric transition at the αAl2O3/iPP is mainly confined in the αAl2O3 side.

  14. Dielectric Metamaterials

    Science.gov (United States)

    2015-05-29

    Final Report  29 May 2015 Dielectric Metamaterials SRI Project P21340 ONR Contract N00014-12-1-0722 Prepared by: Srini Krishnamurthy...2 2. Theory of Metamaterials ....................................................................................................... 2 2.1...accurately assess the impact of various forms of disorder on metamaterials (MMs) (both dielectric and metal inclusions); and (5) identify designs

  15. Approach to visualization of and optical sensing by Bloch surface waves in noble or base metal-based plasmonic photonic crystal slabs.

    Science.gov (United States)

    Baryshev, A V; Merzlikin, A M

    2014-05-10

    The Bloch surface wave resonance (SWR) was visualized with the aid of plasmon absorption in a dielectric/metal/dielectric sandwich terminating a one-dimensional photonic crystal (PhC). An SWR peak in calculated spectra of such a plasmonic photonic crystal (PPhC) slab comprising a noble or base metal layer was demonstrated to be sensitive to a negligible variation of refractive index of a medium adjoining to the slab. The considered structure of PPhC slabs can be of practical importance because the metal layer is protected by a capping dielectric layer from contact with analytes and, consequently, from deterioration. We found that, in case of PPhC slabs, gold (the key element of the surface plasmon resonance-based biosensors) can be replaced by other metals. The PPhC-based sensors can be low-cost, reusable, and robust sensors having a sensitivity surpassing that of the known optical sensors.

  16. Broadband cloaking using composite dielectrics

    Directory of Open Access Journals (Sweden)

    Ruey-Bing Hwang

    2011-03-01

    Full Text Available In this paper, we present a novel cloaking structure that is able to make a metallic block invisible in a metallic waveguide. Such a cloak is made up of a stack of commonly used dielectric slabs. We carry out the numerical simulation and observe the detour of the vector Poynting power through the cloak. Moreover, the experiment is conducted for measuring the scattering characteristics including the reflection and transmission coefficients. The great improvement in the transmission coefficient in a broad bandwidth after cloaking is demonstrated. Significantly, the theory of mode conversion is developed for explaining the cloaking phenomenon.

  17. Rheological evolution of subducting slabs

    Science.gov (United States)

    Hirth, G.

    2016-12-01

    The mechanical behavior of subducting lithosphere depends on both the rheological evolution of the slab and how the slab is modified prior to subduction. Geophysical data demonstrate that the combination of thermal evolution and deformation lead to alteration of the slab at both mid-ocean ridges and the outer rise of subduction zones. In addition, the locations of earthquakes in these locations are generally consistent with both extrapolation of laboratory data that constrain the depth to the brittle-plastic transition, and deformation mechanisms inferred from microstructural analysis of mantle rocks recovered from the oceanic lithosphere. However, the frictional properties of both mantle aggregates and their alteration products suggest that linking the location of lithospheric earthquakes to regions that become hydrothermally altered is not straightforward. Furthermore, the inferred link between the location of intermediate-depth seismicity and the conditions of dehydration reactions is challenged by laboratory studies on dehydration embrittlement. In this presentation, I will introduce these apparent discrepancies; provide some possible resolutions for them based on scaling of laboratory data and discuss the implications for how an integrated understanding of slab rheology informs our understanding of the mechanical and geochemical evolution of the slab.

  18. Broad band invisibility cloak made of normal dielectric multilayer

    CERN Document Server

    Xu, Xiaofei; Xiong, Shuai; Fan, Jinlong; Zhao, Jun-Ming; Jiang, Tian

    2011-01-01

    We present the design, fabrication and performance test of a quasi three-dimensional carpet cloak made of normal dielectric in the microwave regime. Taking advantage of a simple linear coordinate transformation we design a carpet cloak with homogeneous anisotropic medium and then practically realize the device with multilayer of alternating normal dielectric slabs based on the effective medium theory. As a proof-of-concept example, we fabricate the carpet cloak with multilayer of FR4 dielectric slabs with air spacing. The performance of the fabricated design is verified through full-wave numerical simulation and measurement of the far-field scattering electromagnetic waves in a microwave anechoic chamber. Experimental results have demonstrated pronounced cloaking effect in a very broad band from 8 GHz to 18 GHz (whole X and Ku band) due to the low loss, non-dispersive feature of the multilayer dielectric structure.

  19. The restoring force on a dielectric in a parallel plate capacitor

    Science.gov (United States)

    Staunton, L. P.

    2014-09-01

    We investigate the restoring force on a dielectric slab being pulled from within the volume of a parallel plate capacitor connected to a battery. Using a conformal mapping to treat the fringing electric field exactly, we numerically obtain an expected Hooke's Law restoring force for small displacements, and a diminishing force for a displacement up to half the length of the dielectric.

  20. Enhanced detection limit by dark mode perturbation in 2D photonic crystal slab refractive index sensors.

    Science.gov (United States)

    Nicolaou, Costa; Lau, Wah Tung; Gad, Raanan; Akhavan, Hooman; Schilling, Ryan; Levi, Ofer

    2013-12-16

    We demonstrate for the first time a 300nm thick, 300μm × 300μm 2D dielectric photonic crystal slab membrane with a quality factor of 10,600 by coupling light to slightly perturbed dark modes through alternating nano-hole sizes. The newly created fundamental guided resonances greatly reduce nano-fabrication accuracy requirements. Moreover, we created a new layer architecture resulting in electric field enhancement at the interface between the slab and sensing regions, and spectral sensitivity of >800 nm/RIU, that is, >0.8 of the single-mode theoretical upper limit of spectral sensitivity.

  1. Surface modes in slab waveguides with a left handed materials cover

    Institute of Scientific and Technical Information of China (English)

    LI Su-Ping; WANG Zi-Hua; SHEN Lu-Fa

    2009-01-01

    The surface mode propagation along a dielectric slab waveguide which consists of the core and substrate of right handed materials (RHM) and the cover of left handed materials (LHM) is studied. The normalized frequency and normalized propagation constant are introduced to the left-handed material slab waveguides. The dispersion relations expressed by the normalized parameters are derived. Universal dispersion curves are obtained analytically. Based on that, the dispersion properties differ dramatically for different LHM constitutive parameters, the surface TE0 and TE1 modes are internatively obtained. It shows that two different kinds of TE modes compensate each other to form a whole mode.

  2. How mantle slabs drive plate tectonics.

    Science.gov (United States)

    Conrad, Clinton P; Lithgow-Bertelloni, Carolina

    2002-10-04

    The gravitational pull of subducted slabs is thought to drive the motions of Earth's tectonic plates, but the coupling between slabs and plates is not well established. If a slab is mechanically attached to a subducting plate, it can exert a direct pull on the plate. Alternatively, a detached slab may drive a plate by exciting flow in the mantle that exerts a shear traction on the base of the plate. From the geologic history of subduction, we estimated the relative importance of "pull" versus "suction" for the present-day plates. Observed plate motions are best predicted if slabs in the upper mantle are attached to plates and generate slab pull forces that account for about half of the total driving force on plates. Slabs in the lower mantle are supported by viscous mantle forces and drive plates through slab suction.

  3. ARC Code TI: SLAB Spatial Audio Renderer

    Data.gov (United States)

    National Aeronautics and Space Administration — SLAB is a software-based, real-time virtual acoustic environment rendering system being developed as a tool for the study of spatial hearing. SLAB is designed to...

  4. Differential uncertainty analysis for evaluating the accuracy of S-parameter retrieval methods for electromagnetic properties of metamaterial slabs.

    Science.gov (United States)

    Hasar, Ugur Cem; Barroso, Joaquim J; Sabah, Cumali; Kaya, Yunus; Ertugrul, Mehmet

    2012-12-17

    We apply a complete uncertainty analysis, not studied in the literature, to investigate the dependences of retrieved electromagnetic properties of two MM slabs (the first one with only split-ring resonators (SRRs) and the second with SRRs and a continuous wire) with single-band and dual-band resonating properties on the measured/simulated scattering parameters, the slab length, and the operating frequency. Such an analysis is necessary for the selection of a suitable retrieval method together with the correct examination of exotic properties of MM slabs especially in their resonance regions. For this analysis, a differential uncertainty model is developed to monitor minute changes in the dependent variables (electromagnetic properties of MM slabs) in functions of independent variables (scattering (S-) parameters, the slab length, and the operating frequency). Two complementary approaches (the analytical approach and the dispersion model approach) each with different strengths are utilized to retrieve the electromagnetic properties of various MM slabs, which are needed for the application of the uncertainty analysis. We note the following important results from our investigation. First, uncertainties in the retrieved electromagnetic properties of the analyzed MM slabs drastically increase when values of electromagnetic properties shrink to zero or near resonance regions where S-parameters exhibit rapid changes. Second, any low-loss or medium-loss inside the MM slabs due to an imperfect dielectric substrate or a finite conductivity of metals can decrease these uncertainties near resonance regions because these losses hinder abrupt changes in S-parameters. Finally, we note that precise information of especially the slab length and the operating frequency is a prerequisite for accurate analysis of exotic electromagnetic properties of MM slabs (especially multiband MM slabs) near resonance regions.

  5. Transient Temperature Analysis of Slab in Erdemir

    Institute of Scientific and Technical Information of China (English)

    (U)nal Camdali; Murat Tunc; Sedat Sisbot

    2008-01-01

    A transient thermal model was developed for slab furnaces in Eregli Iron and Steel Worlds (Erdemir) in Turkey and the model was solved using the FlexPDE computer program. This program uses the finite element method. Program codes were written to solve the temperature distribution of slabs that are put into furnace at 25℃ and removed at about 1 250℃. To obtain the optimum slab exit temperature variation, the necessary air temperature inside the furnace was calculated to be 1 390℃. The slab temperature versus time and the temperature variation inside the slab were depicted.

  6. Method for Bubbledeck Concrete Slab with Gaps

    Directory of Open Access Journals (Sweden)

    Sergiu Călin

    2009-01-01

    Full Text Available The composite slabs are made of BubbleDeck type slab elements with spherical gaps, poured in place on transversal and longitudinal directions. By introducing the gaps leads to a 30...50\\% lighter slab which reduces the loads on the columns, walls and foundations, and of course of the entire building. BubbleDeck slab elements are plates with ribs on two directions made of reinforced concrete or precast concrete with spherical shaped bubbles. These slab elements have a bottom and an upper concrete part connected with vertical ribs that go around the gaps.

  7. Focusing analysis of a complex photonic crystal slab with negative refraction

    Energy Technology Data Exchange (ETDEWEB)

    Wang, H.-W.; Wu, M.-L. [Department of Mechanical Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China); Chen, L.-W., E-mail: chenlw@mail.ncku.edu.t [Department of Mechanical Engineering, National Cheng Kung University, Tainan 70101, Taiwan (China)

    2010-10-01

    The electromagnetic wave propagation in a two-dimensional (2D) complex triangular photonic crystal (PC) consisting of dielectric cylinders of different radii in air is investigated. The plane wave expansion (PWE) and finite element (FE) methods are used to study the optical and focusing properties of the complex PC. Interestingly, in contrast to a triangular PC consisting of dielectric cylinders of the same radius, the complex PC can generate a focusing effect with an effective refractive index of -1. Furthermore, a design is proposed using antireflection structures to enhance the transmission efficiency of light at the interfaces between the air and the PC slab. Numerical simulations show that appropriately adding antireflection structures to the surface of the slab can greatly improve the focusing resolution.

  8. Low-damping epsilon-near-zero slabs: nonlinear and nonlocal optical properties

    CERN Document Server

    de Ceglia, Domenico; Vincenti, Maria Antonietta; Capolino, Filippo; Scalora, Michael

    2013-01-01

    We investigate second harmonic generation, low-threshold multistability, all-optical switching, and inherently nonlocal effects due to the free-electron gas pressure in an epsilon-near-zero (ENZ) metamaterial slab made of cylindrical, plasmonic nanoshells illuminated by TM-polarized light. Damping compensation in the ENZ frequency region, achieved by using gain medium inside the shells' dielectric cores, enhances the nonlinear properties. Reflection is inhibited and the electric field component normal to the slab interface is enhanced near the effective pseudo-Brewster angle, where the effective \\epsilon-near-zero condition triggers a non-resonant, impedance-matching phenomenon. We show that the slab displays a strong effective, spatial nonlocality associated with leaky modes that are mediated by the compensation of damping. The presence of these leaky modes then induces further spectral and angular conditions where the local fields are enhanced, thus opening new windows of opportunity for the enhancement of ...

  9. Beam Collimation Using an Anisotropic Metamaterial Slab without Any Nanometer-sized Aperture

    CERN Document Server

    Zhang, Shou; Cui, Yanxia; Zhang, Feng; He, Sailing; Hao, Yuying; Zhu, Furong

    2015-01-01

    Plasmonic beam collimation effect has been thoroughly investigated based on the well-known nanometer-scale bull's eye structure formed by complex and high-cost fabrication processes. In this work, we report our effort for attaining beam collimation using an anisotropic metamaterial (AMM) slab that consists of a stack of alternating metal/dielectric layers and an integrated top metal grating. The results show that AMM slab allows creating the beam collimation effect similar to that of the bull's eye structure, an enabling technology for practical application due to its simple architecture and cost benefits. The excitation of surface plasmons at the AMM/air interface is derived. The structure of the AMM slab and its impact on beaming performance were analyzed using the effective medium theory and Finite Element Method.

  10. Controllable optical bistability and multistability in a slab defected with monolayer graphene nanostructure

    Science.gov (United States)

    Solookinejad, Gh.

    2016-05-01

    In this paper, the optical bistability (OB) and optical multistability (OM) properties of weak probe light in a defect dielectric medium doped by four-level graphene nanostructure is theoretically discussed. The double dark resonance can arise by linear polarized control laser fields which consist of linear left and right circularly polarized light. We show that by adjusting the Rabi-frequencies of control fields, frequency detuning of bichromatic electric fields, the intensity threshold and hysteric curves of OB and OM can be manipulated. Moreover, the thickness of the slab is considered as a controllable parameter which can impact the OB and OM behaviors of weak probe light in a defect slab. We find that the transition from OB to OM or vice versa can be possible by adjusting the thickness of the slab. Our results may provide some new application on Nano-scale devices in future all-optical communication and quantum information technologies.

  11. Low-damping epsilon-near-zero slabs: nonlinear and nonlocal optical properties

    OpenAIRE

    de Ceglia, Domenico; Campione, Salvatore; Vincenti, Maria Antonietta; Capolino, Filippo; Scalora, Michael

    2013-01-01

    We investigate second harmonic generation, low-threshold multistability, all-optical switching, and inherently nonlocal effects due to the free-electron gas pressure in an epsilon-near-zero (ENZ) metamaterial slab made of cylindrical, plasmonic nanoshells illuminated by TM-polarized light. Damping compensation in the ENZ frequency region, achieved by using gain medium inside the shells' dielectric cores, enhances the nonlinear properties. Reflection is inhibited and the electric field compone...

  12. Engineering the near-field imaging of a rectangular-lattice photonic-crystal slab in the second band

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Imaging properties of a two-dimensional rectangular-lattice photonic crystal (PC) slab consisting of air holes immersed in a dielectric are studied in this work. The field patterns of electromagnetic waves radiated from a point source through the PC slab are calculated with the finite-difference time-domain method. Comparing the field patterns with the corresponding equifrequency-surface contours simulated by the plane-wave expansion method, we find that an excellent-quality near-field image may be formed through the PC slab by the mechanisms of the simultaneous action of the self-collimation effect and the negative-refraction effect. Near-field imaging may be obtained within two different frequency regions in two vertical directions of the PC slab.

  13. Engineering the near-field imaging of a rectangular-lattice photonic-crystal slab in the second band

    Institute of Scientific and Technical Information of China (English)

    FENG Shuai; AO Ling; WANG YiQuan

    2009-01-01

    Imaging properties of a two-dimensional rectangular-lattice photonic crystal (PC) slab consisting of air holes immersed in a dielectric are studied in this work. The field patterns of electromagnetic waves radiated from a point source through the PC slab are calculated with the finite-difference time-domain method. Comparing the field patterns with the corresponding equifrequency-surface contours simu-lated by the plane-wave expansion method, we find that an excellent-quality near-field image may be formed through the PC slab by the mechanisms of the simultaneous action of the self-collimation effect and the negative-refraction effect. Near-field imaging may be obtained within two different frequency regions in two vertical directions of the PC slab.

  14. Metallurgical quality of CSP thin slabs

    Institute of Scientific and Technical Information of China (English)

    Deguang Zhou; Jie Fu; Yonglin Kang; Zhongbing Wang; Jing Li; Zhongbo Xu

    2004-01-01

    The casting structure, chemical composition segregation, dendrite arm space, inclusiona and during the CSP (compact strip production) rolling process were investigated. The results show that the CSP thin slab has a feature of uniform fme grains, more columnar crystals, less central porosity and segregation etc. There is no great difference in macrostructure between the CSP thin slab and conventional slab; however, the fine dendrite structure of the CSP slab is more uniform. Moreover, the central porosity and segregation are obviously improved after the first pass; and the dendrite is bent along the rolling direction rather than broken into pieces.Small inclusions with the diameter less than 10 μm in the CSP slab are dominantly consisted of aluminates formed by A1 deoxidation and Ca treatment and not floating out of the melt. The large size inclusions found in the continuous casting slab are very few.

  15. Higher order modes in photonic crystal slabs.

    Science.gov (United States)

    Gansch, Roman; Kalchmair, Stefan; Detz, Hermann; Andrews, Aaron M; Klang, Pavel; Schrenk, Werner; Strasser, Gottfried

    2011-08-15

    We present a detailed investigation of higher order modes in photonic crystal slabs. In such structures the resonances exhibit a blue-shift compared to an ideal two-dimensional photonic crystal, which depends on the order of the slab mode and the polarization. By fabricating a series of photonic crystal slab photo detecting devices, with varying ratios of slab thickness to photonic crystal lattice constant, we are able to distinguish between 0th and 1st order slab modes as well as the polarization from the shift of resonances in the photocurrent spectra. This method complements the photonic band structure mapping technique for characterization of photonic crystal slabs. © 2011 Optical Society of America

  16. Van der Waals interaction torque and force between dielectrically anisotropic layered media

    CERN Document Server

    Lu, Bing-Sui

    2016-01-01

    We analyse the van der Waals interaction for a pair of dielectrically anisotropic plane-layered media interacting across a dielectrically isotropic medium. We investigate the van der Waals torque and force for the following cases: (i) a pair of single anisotropic layers, (ii) a single anisotropic layer interacting with a multilayered slab consisting of alternating anisotropic and isotropic layers, and (iii) a pair of multilayered slabs each consisting of alternating anisotropic and isotropic layers, looking at the cases where the optical axes lie parallel and/or perpendicular to the plane of the layers. For the first case, the optical axes of the oppositely facing anisotropic layers of the two interacting slabs generally have an angular mismatch, and within each multilayered slab the optical axes may either be the same, or undergo constant angular increments across the anisotropic layers. In particular, we examine how the behaviors of the van der Waals torque and force can be "tuned" by adjusting the layer th...

  17. A slab expression in the Gibraltar arc?

    Science.gov (United States)

    Nijholt, Nicolai; Govers, Rob; Wortel, Rinus

    2017-04-01

    The present-day geodynamic setting of the Gibraltar arc region results from several Myrs of subduction rollback in the overall (oblique) convergence of Africa and Iberia. As for most rollback settings in a convergence zone, the interaction of these two components is complex and distinctly non-stationary. Gibraltar slab rollback is considered to have stalled, or at least diminished largely in magnitude, since the late Miocene/early Pliocene, suggesting that the effect of the slab on present-day surface motions is negligible. However, GPS measurements indicate that the Gibraltar arc region has an anomalous motion with respect to both Iberia and Africa, i.e., the Gibraltar arc region does not move as part of the rigid Iberian, or the rigid African plate. A key question is whether this surface motion is an expression of the Gibraltar slab. Seismic activity in the Gibraltar region is diffuse and considerable in magnitude, making it a region of high seismic risk. Unlike the North African margin to the east, where thrust earthquakes dominate the focal mechanism tables, a complex pattern is observed with thrust, normal and strike-slip earthquakes in a region stretching between the northern Moroccan Atlas across the Gibraltar arc and Alboran Sea (with the Trans-Alboran Shear Zone) to the Betics of southern Spain. Even though no large mega-thrust earthquakes have been observed in recent history, slab rollback may not have completely ceased. However, since no activity has been observed in the accretionary wedge, probably since the Pliocene, it is likely that the subduction interface is locked. In this study, we perform a series of numerical models in which we combine the relative plate convergence, variable magnitude of friction on fault segments, regional variations in gravitational potential energy and slab pull of the Gibraltar slab. We seek to reproduce the GPS velocities and slip sense on regional faults and thereby determine whether the Gibraltar slab has an effect on

  18. Slab stagnation and detachment under northeast China

    Science.gov (United States)

    Honda, Satoru

    2016-03-01

    Results of tomography models around the Japanese Islands show the existence of a gap between the horizontally lying (stagnant) slab extending under northeastern China and the fast seismic velocity anomaly in the lower mantle. A simple conversion from the fast velocity anomaly to the low-temperature anomaly shows a similar feature. This feature appears to be inconsistent with the results of numerical simulations on the interaction between the slab and phase transitions with temperature-dependent viscosity. Such numerical models predict a continuous slab throughout the mantle. I extend previous analyses of the tomography model and model calculations to infer the origins of the gap beneath northeastern China. Results of numerical simulations that take the geologic history of the subduction zone into account suggest two possible origins for the gap: (1) the opening of the Japan Sea led to a breaking off of the otherwise continuous subducting slab, or (2) the western edge of the stagnant slab is the previous subducted ridge, which was the plate boundary between the extinct Izanagi and the Pacific plates. Origin (2) suggesting the present horizontally lying slab has accumulated since the ridge subduction, is preferable for explaining the present length of the horizontally lying slab in the upper mantle. Numerical models of origin (1) predict a stagnant slab in the upper mantle that is too short, and a narrow or non-existent gap. Preferred models require rather stronger flow resistance of the 660-km phase change than expected from current estimates of the phase transition property. Future detailed estimates of the amount of the subducted Izanagi plate and the present stagnant slab would be useful to constrain models. A systematic along-arc variation of the slab morphology from the northeast Japan to Kurile arcs is also recognized, and its understanding may constrain the 3D mantle flow there.

  19. Turbulence in the cylindrical slab

    Energy Technology Data Exchange (ETDEWEB)

    Gentle, K. W.; Rowan, W. L.; Williams, C. B.; Brookman, M. W. [Institute of Fusion Studies, University of Texas at Austin, Austin, Texas 78712 (United States)

    2014-09-15

    The cylindrical slab was the first and simplest model of intrinsically unstable microturbulence. The Helimak is an experimental realization of this model. Although finite, it is sufficiently large to escape boundary effects, with dimensionless parameters similar to those of a tokamak edge or scrape off layer. The essential drive is interchange-like, a pressure gradient with unfavorable magnetic curvature, leading to a non-linearly saturated state of large-amplitude turbulence, Δn{sub rms}/n ∼ 0.5. The nonlinear processes governing this saturation are unique, unlike any of those posited for the much weaker turbulence typical of confined plasma, e.g., in a tokamak. Neither linear stability theory, quasi-linear theory, zonal flows, nor flow shear stabilization is consistent with the observations. The mechanisms determining the non-linearly saturated state constitute an important challenge to our understanding of strongly nonlinear systems.

  20. Cretaceous Arctic magmatism: Slab vs. plume? Or slab and plume?

    Science.gov (United States)

    Gottlieb, E. S.; Miller, E. L.; Andronikov, A. V.; Brumley, K.; Mayer, L. A.; Mukasa, S. B.

    2010-12-01

    Tectonic models for the Cretaceous paleogeographic evolution of the Arctic Ocean and its adjacent landmasses propose that rifting in the Amerasia Basin (AB) began in Jura-Cretaceous time, accompanied by the development of the High Arctic Large Igneous Province (HALIP). During the same timespan, deformation and slab-related magmatism, followed by intra-arc rifting, took place along the Pacific side of what was to become the Arctic Ocean. A compilation and comparison of the ages, characteristics and space-time variation of circum-Arctic magmatism allows for a better understanding of the role of Pacific margin versus Arctic-Atlantic plate tectonics and the role of plume-related magmatism in the origin of the Arctic Ocean. In Jura-Cretaceous time, an arc built upon older terranes overthrust the Arctic continental margins of North America and Eurasia, shedding debris into foreland basins in the Brooks Range, Alaska, across Chukotka, Russia, to the Lena Delta and New Siberian Islands region of the Russian Arctic. These syn-tectonic sediments have some common sources (e.g., ~250-300 Ma magmatic rocks) as determined by U-Pb detrital zircon geochronology. They are as young as Valanginian-Berriasian (~136 Ma, Gradstein et al., 2004) and place a lower limit on the age of formation of the AB. Subsequent intrusions of granitoid plutons, inferred to be ultimately slab-retreat related, form a belt along the far eastern Russian Arctic continental margin onto Seward Peninsula and have yielded a continuous succession of zircon U-Pb ages from ~137-95 Ma (n=28) and a younger suite ~91-82 Ma (n=16). All plutons dated were intruded in an extensional tectonic setting based on their relations to wall-rock deformation. Regional distribution of ages shows a southward migration of the locus of magmatism during Cretaceous time. Basaltic lavas as old as 130 Ma and as young as 80 Ma (40Ar/39Ar)) erupted across the Canadian Arctic Islands, Svalbard and Franz Josef Land and are associated with

  1. Photonic bands, gap maps, and intrinsic losses in three-component 2D photonic crystal slabs

    Institute of Scientific and Technical Information of China (English)

    Hongjun Shen; Huiping Tian; Yuefeng Ji

    2009-01-01

    We obtain the photonic bands and intrinsic losses for the triangular lattice three-component two-dimensional (2D) photonic crystal (PhC) slabs by expanding the electromagnetic field on the basis of waveguide modes of an effective homogeneous waveguide. The introduction of the third component into the 2D PhC slabs influences the photonic band structure and the intrinsic losses of the system. We ex-amine the dependences of the band gap width and gap edge position on the interlayer dielectric constant and interlayer thickness. It is found that the gap edges shift to lower frequencies and the intrinsic losses of each band decrease with the increasing interlayer thickness or dielectric constant. During the design of the real PhC system, the effect of unintentional native oxide surface layer on the optical properties of 2D PhC slabs has to be taken into consideration. At the same time, intentional oxidization of macroporous PhC structure can be utilized to optimize the design.

  2. Sausage oscillations of coronal plasma slabs

    Science.gov (United States)

    Hornsey, C.; Nakariakov, V. M.; Fludra, A.

    2014-07-01

    Context. Sausage oscillations are observed in plasma non-uniformities of the solar corona as axisymmetric perturbations of the non-uniformity. Often, these non-uniformities can be modelled as field-aligned slabs of the density enhancement. Aims: We perform parametric studies of sausage oscillations of plasma slabs, aiming to determine the dependence of the oscillation period on its parameters, and the onset of leaky and trapped regimes of the oscillations. Methods: Slabs with smooth transverse profiles of the density of a zero-beta plasma are perturbed by an impulsive localised perturbation of the sausage symmetry. In particular, the slab can contain an infinitely thin current sheet in its centre. The initial value problem is then solved numerically. The numerical results are subject to spectral analysis. The results are compared with analytical solutions for a slab with a step-function profile and also with sausage oscillations of a plasma cylinder. Results: We established that sausage oscillations in slabs generally have the same properties as in plasma cylinders. In the trapped regime, the sausage oscillation period increases with the increase in the longitudinal wavelength. In the leaky regime, the dependence of the period on the wavelength experiences saturation, and the period becomes independent of the wavelength in the long-wavelength limit. In the leaky regime the period is always longer than in the trapped regime. The sausage oscillation period in a slab is always longer than in a cylinder with the same transverse profile. In slabs with steeper transverse profiles, sausage oscillations have longer periods. The leaky regime occurs at shorter wavelengths in slabs with smoother profiles.

  3. Dielectric metasurfaces

    Science.gov (United States)

    Valentine, Jason

    While plasmonics metasurfaces have seen much development over the past several years, they still face throughput limitations due to ohmic losses. On the other hand, dielectric resonators and associated metasurfaces can eliminate the issue of ohmic loss while still providing the freedom to engineer the optical properties of the composite. In this talk, I will present our recent efforts to harness this freedom using metasurfaces formed from silicon and fabricated using CMOS-compatible techniques. Operating in the telecommunications band, I will discuss how we have used this platform to realize a number of novel functionalities including wavefront control, near-perfect reflection, and high quality factor resonances. In many cases the optical performance of these silicon-based metasurfaces can surpass their plasmonic counterparts. Furthermore, for some cases the surfaces are more amenable to large-area fabrication techniques.

  4. Achieving anisotropy in metamaterials made of dielectric cylindrical rods

    DEFF Research Database (Denmark)

    Peng, Liang; Ran, Lixin; Mortensen, Asger

    2010-01-01

    We show that anisotropic negative effective dispersion relation can be achieved in pure dielectric rod-type metamaterials by turning from the symmetry of a square lattice to that of a rectangular one. Theoretical predictions and conclusions are verified by both numerical calculations and computer...... based simulations. The proposed anisotropic metamaterial, is used to construct a refocusing slab lens and a subdiffraction hyperlens. The all-dielectric origin makes it more straightforward to address loss and scaling, thus facilitating future applications in both the terahertz and optical range....

  5. Potential application of a homogeneous and anisotropic slab as an angle insensitive absorbing material

    Directory of Open Access Journals (Sweden)

    Fang Wang

    2017-06-01

    Full Text Available In this paper, a flat and incident angle independence absorbing material is proposed and numerically verified in the optical spectrum. A homogeneous and anisotropic dielectric slab as a non-reflecting layer is first reviewed, and a feasible realization strategy of the slab is then given by using layered isotropic materials. When the loss components of the constitutive materials are not zero, the slab will work as an angle insensitive absorbing layer, and the absorption rate augments with increase of the losses. As the numerical verifications, the field distributions of a metallic cylinder and a triangular metallic object individually covered by the designed absorbing layer are demonstrated. The simulation results show that the designed absorbing layer can efficiently absorb the incident waves with the property of incident angle independence at the operation frequency. This homogeneous slab can be used in one and two dimensional situations for the realization of an invisibility cloak, a carpet cloak and even a skin cloak, if it is used to conformally cover target objects.

  6. Analysis of guided-resonance-based polarization beam splitting in photonic crystal slabs.

    Science.gov (United States)

    Kilic, Onur; Fan, Shanhui; Solgaard, Olav

    2008-11-01

    We present an analysis of the phase and amplitude responses of guided resonances in a photonic crystal slab. Through this analysis, we obtain the general rules and conditions under which a photonic crystal slab can be employed as a general elliptical polarization beam splitter, separating an incoming beam equally into its two orthogonal constituents, so that half the power is reflected in one polarization state, and half the power is transmitted in the other state. We show that at normal incidence a photonic crystal slab acts as a dual quarter-wave retarder in which the fast and slow axes are switched for reflection and transmission. We also analyze the case where such a structure operates at oblique incidences. As a result we show that the effective dielectric constant of the photonic crystal slab imposes the Brewster angle as a boundary, separating two ranges of angles with different mechanisms of polarization beam splitting. We show that the diattenuation can be tuned from zero to one to make the structure a circular or linear polarization beam splitter. We verify our analytical analysis through finite-difference time-domain simulations and experimental measurements at infrared wavelengths.

  7. Ion-mediated interactions between net-neutral slabs: Weak and strong disorder effects

    Science.gov (United States)

    Ghodrat, Malihe; Naji, Ali; Komaie-Moghaddam, Haniyeh; Podgornik, Rudolf

    2015-12-01

    We investigate the effective interaction between two randomly charged but otherwise net-neutral, planar dielectric slabs immersed in an asymmetric Coulomb fluid containing a mixture of mobile monovalent and multivalent ions. The presence of charge disorder on the apposed bounding surfaces of the slabs leads to substantial qualitative changes in the way they interact, as compared with the standard picture provided by the van der Waals and image-induced, ion-depletion interactions. While, the latter predict purely attractive interactions between strictly neutral slabs, we show that the combined effects from surface charge disorder, image depletion, Debye (or salt) screening, and also, in particular, their coupling with multivalent ions, give rise to a more diverse behavior for the effective interaction between net-neutral slabs at nano-scale separations. Disorder effects show large variation depending on the properly quantified strength of disorder, leading either to non-monotonic effective interaction with both repulsive and attractive branches when the surface charges are weakly disordered (small disorder variance) or to a dominating attractive interaction that is larger both in its range and magnitude than what is predicted from the van der Waals and image-induced, ion-depletion interactions, when the surfaces are strongly disordered (large disorder variance).

  8. Ion-mediated interactions between net-neutral slabs: Weak and strong disorder effects.

    Science.gov (United States)

    Ghodrat, Malihe; Naji, Ali; Komaie-Moghaddam, Haniyeh; Podgornik, Rudolf

    2015-12-21

    We investigate the effective interaction between two randomly charged but otherwise net-neutral, planar dielectric slabs immersed in an asymmetric Coulomb fluid containing a mixture of mobile monovalent and multivalent ions. The presence of charge disorder on the apposed bounding surfaces of the slabs leads to substantial qualitative changes in the way they interact, as compared with the standard picture provided by the van der Waals and image-induced, ion-depletion interactions. While, the latter predict purely attractive interactions between strictly neutral slabs, we show that the combined effects from surface charge disorder, image depletion, Debye (or salt) screening, and also, in particular, their coupling with multivalent ions, give rise to a more diverse behavior for the effective interaction between net-neutral slabs at nano-scale separations. Disorder effects show large variation depending on the properly quantified strength of disorder, leading either to non-monotonic effective interaction with both repulsive and attractive branches when the surface charges are weakly disordered (small disorder variance) or to a dominating attractive interaction that is larger both in its range and magnitude than what is predicted from the van der Waals and image-induced, ion-depletion interactions, when the surfaces are strongly disordered (large disorder variance).

  9. Wave Propagation through Axially-Symmetric Dielectric Shells.

    Science.gov (United States)

    1980-02-01

    estimating the amplitude and phase of guided waves excited on finite dielectric slabs by incident plane waves. The procedure is based onj the moment...8217 ’ " ] cos2 ,0 dado dz, (4-69) x2 2 where = (ao - ap’ cos0 -zz’) (4-70) and [...1 [6 (+6p)-6 (a-6p)-a -1 . (4-71) After doing the integrals, we have

  10. Radiation pressure of active dispersive chiral slabs.

    Science.gov (United States)

    Wang, Maoyan; Li, Hailong; Gao, Dongliang; Gao, Lei; Xu, Jun; Qiu, Cheng-Wei

    2015-06-29

    We report a mechanism to obtain optical pulling or pushing forces exerted on the active dispersive chiral media. Electromagnetic wave equations for the pure chiral media using constitutive relations containing dispersive Drude models are numerically solved by means of Auxiliary Differential Equation Finite Difference Time Domain (ADE-FDTD) method. This method allows us to access the time averaged Lorentz force densities exerted on the magnetoelectric coupling chiral slabs via the derivation of bound electric and magnetic charge densities, as well as bound electric and magnetic current densities. Due to the continuously coupled cross-polarized electromagnetic waves, we find that the pressure gradient force is engendered on the active chiral slabs under a plane wave incidence. By changing the material parameters of the slabs, the total radiation pressure exerted on a single slab can be directed either along the propagation direction or in the opposite direction. This finding provides a promising avenue for detecting the chirality of materials by optical forces.

  11. On the tunneling of full-vector X-Waves through a slab under frustrated total reflection condition

    KAUST Repository

    Salem, Mohamed

    2012-07-01

    Tunneling of full-vector X-Waves through a dielectric slab under frustrated total reflection condition is investigated. Full-vector X-Waves are obtained by superimposing transverse electric and magnetic polarization components, which are derived from the scalar X-Wave solution. The analysis of reflection and transmission at the dielectric interfaces is carried out analytically in a straightforward fashion using vector Bessel beam expansion. Investigation of the fields propagating away from the farther end of the slab (transmitted fields) shows an advanced (superluminal) transmission of the X-Wave peak. Additionally, a similar advanced reflection is also observed. The apparent tunneling of the peak is shown to be due to the phase shift in the fields\\' spectra and not to be causally related to the incident peak. © 2012 IEEE.

  12. Negative refraction and subwavelength imaging of a photonic-crystal slab for the frequencies in the third band

    Institute of Scientific and Technical Information of China (English)

    Shuai Feng; Cheng Ren; Degang Xu; Yiquan Wang

    2009-01-01

    Negative refraction and subwavelength imaging properties of a two-dimensional(2D)photonic crystal(PC)slab are studied by the finite-difference time-domain method.The PC consists of a triangular lattice of air holes immersed in a dielectric.For a certain frequency range in the third photonic band,the directions of the group velocities and the phase velocities can be opposite,so the PC can work as a kind of negative refractive-index material.The light radiated from a point source can form a subwavelength image spot through the PC slab.Negative refraction and an effective refractive index of the PC slab n=-1 can be achieved for the incident wave with its incident angle within a certain range.

  13. Ultra high-Q photonic crystal nanocavity design: The effect of a low-epsilon slab material

    CERN Document Server

    Bayn, Igal

    2008-01-01

    We analyze the influence of the dielectric constant of the slab on the quality factor (Q) in slab photonic crystal cavities with a minimized vertical losses model. The higher value of Q in high-epsilon cavity is attributed to the lower mode frequency. The Q ratio in a high-epsilon (silicon) vs. low-epsilon (diamond) slab is examined as a function of mode volume (Vm). The mode volume compensation technique is discussed. Finally, diamond cavity design is addressed. The analytical results are compared to 3D FDTD calculations. In a double heterostructure design, a Q=2.6*10^5 is obtained. The highest Q=1.3*10^6 with Vm=1.77*(lambda/n)^3 in a local width modulation design is derived.

  14. Near-field imaging of a square-lattice metallic photonic-crystal slab at the second band

    Institute of Scientific and Technical Information of China (English)

    Feng Shuai; Feng Zhi-Fang; Ren Kun; Ren Cheng; Li Zhi-Yuan; Cheng Bing-Ying; Zhang Dao-Zhong

    2006-01-01

    Imaging properties of a two-dimensional photonic crystal slab lens are investigated through the finite-difference time-domain method. In this paper, we consider the photonic crystal slab consisting of a square lattice of square metallic rods immersed in a dielectric background. Through the analysis of the equifrequency-surface contours and the field patterns of a point source placed in the vicinity of the photonic crystal slab, we find that a good-quality image can form at the frequencies in the second TM-polarized photonic band. Comparing the images formed at different frequencies, we can clearly see that an excellent-quality image is formed by the mechanisms of simultaneous action of the self-collimation effect and the negative-refraction effect.

  15. Design of energy efficient building with radiant slab cooling

    Science.gov (United States)

    Tian, Zhen

    2007-12-01

    analysis showed that integrated architectural and mechanical design is required to achieve the potential benefits of radiant slab cooling, including: (1) reduction of peak solar gain via windows through (a) avoiding large window-to-wall ratios and/or (b) exterior shading of windows, (2) use of low-quality cooling sources such as cooling towers and ground water, especially in cold, dry climates, and (3) coordination of system control to avoid simultaneous heating and cooling.

  16. Crust rheology, slab detachment and topography

    Science.gov (United States)

    Duretz, T.; Gerya, T. V.

    2012-04-01

    The collision between continents following the closure of an ocean can lead to the subduction of continental crust. The introduction of buoyant crust within subduction zones triggers the development of extensional stresses in slabs which eventually result in their detachment. The dynamic consequences of slab detachment affects the development of topography, the exhumation of high-pressure rocks and the geodynamic evolution of collision zones. We employ two-dimensional thermo-mechanical modelling in order to study the importance of crustal rheology on the evolution of spontaneous subduction-collision systems and the occurrence of slab detachment. The modelling results indicate that varying the rheological structure of the crust can results in a broad range of collisional evolutions involving slab detachment, delamination (associated to slab rollback), or the combination of both mechanisms. By enhancing mechanical coupling at the Moho, a strong crust leads to the deep subduction of the crust (180 km). These collisions are subjected to slab detachment and subsequent coherent exhumation of the crust accommodated by eduction (inversion of subduction sense) and thrusting. In these conditions, slab detachment promotes the development of a high (> 4.5 km) and narrow (delamination of the lithosphere, preventing slab detachment to occur. Further shortening leads to buckling and thickening of the crust resulting in the development of topographic bulging on the lower plate. Collisions involving rheologically layered crust are characterised by a decoupling level at mid-crustal depths. These initial condition favours the delamination of the upper crust as well as the deep subduction of the lower crust. These collisions are thus successively affected by delamination and slab detachment and both processes contribute to the exhumation of the subducted crust. A wide (> 200 km) topographic plateau develops as the results of the buoyant extrusion of the upper crust onto the foreland

  17. Moisture redistribution in screeded concrete slabs

    OpenAIRE

    Åhs, Magnus

    2007-01-01

    The principal objective for this licentiate thesis is to develop a methodology and evaluation model in order to make the future relative humidity in a screeded concrete slab predictable. Residual moisture in screeded concrete slabs may redistribute to the top screed surface under semi-permeable flooring, thus elevating the relative humidity, RH, and possibly exceed the critical humidity level. Passing the critical humidity level may result in material damages on the flooring and adhesive. ...

  18. Estimation of the Reliability of Plastic Slabs

    DEFF Research Database (Denmark)

    Pirzada, G. B. : Ph.D.

    and the concrete but in this thesis these material properties are modelled by stochastic variables. The probabilistic analysis performed in this thesis is mainly based on work by Thoft-Christensen & Baker (9) and Thoft-Christensen & Murotsu (10). Since considerable information about these basic materials used...... in reinforced concrete slabs and the loading is available it is highly probable that other aspects of slab failure, i.e. the punching shear failure and buckling failure, can be included in the probabilistic approach....

  19. Mantle wedge serpentinization effects on slab dips

    Directory of Open Access Journals (Sweden)

    Eh Tan

    2017-01-01

    Full Text Available The mechanical coupling between a subducting slab and the overlying mantle wedge is an important factor in controlling the subduction dip angle and the flow in mantel wedge. This paper investigates the role of the amount of mantle serpentinization on the subduction zone evolution. With numerical thermos-mechanical models with elasto-visco-plastic rheology, we vary the thickness and depth extent of mantle serpentinization in the mantle wedge to control the degree of coupling between the slab and mantle wedge. A thin serpentinized mantle layer is required for stable subduction. For models with stable subduction, we find that the slab dip is affected by the down-dip extent and the mantle serpentinization thickness. A critical down-dip extent exists in mantle serpentinization, determined by the thickness of the overriding lithosphere. If the down-dip extent does not exceed the critical depth, the slab is partially coupled to the overriding lithosphere and has a constant dip angle regardless of the mantle serpentinization thickness. However, if the down-dip extent exceeds the critical depth, the slab and the base of the overriding lithosphere would be separated and decoupled by a thick layer of serpentinized peridotite. This allows further slab bending and results in steeper slab dip. Increasing mantle serpentinization thickness will also result in larger slab dip. We also find that with weak mantle wedge, there is no material flowing from the asthenosphere into the serpentinized mantle wedge. All of these results indicate that serpentinization is an important ingredient when studying the subduction dynamics in the mantle wedge.

  20. Photocatalytic, highly hydrophilic porcelain stoneware slabs

    Science.gov (United States)

    Raimondo, M.; Guarini, G.; Zanelli, C.; Marani, F.; Fossa, L.; Dondi, M.

    2011-10-01

    Photocatalytic, highly hydrophilic industrial porcelain stoneware large slabs were realized by deposition of nanostructured TiO2 coatings. Different surface finishing and experimental conditions were considered in order to assess the industrial feasibility. Photocatalytic and wetting behaviour of functionalized slabs mainly depends on surface phase composition in terms of anatase/rutile ratio, this involving - as a key issue - the deposition of TiO2 on industrially sintered products with an additional annealing step to strengthen coatings' performances and durability.

  1. Plasmons and polaritons in a semi-infinite plasma and a plasma slab

    CERN Document Server

    Apostol, M

    2009-01-01

    Plasmon and polariton modes are derived for an ideal semi-infinite (half-space) plasma and an ideal plasma slab by using a general, unifying procedure, based on equations of motion, Maxwell's equations and suitable boundary conditions. Known results are re-obtained in much a more direct manner and new ones are derived. The approach consists of representing the charge disturbances by a displacement field in the positions of the moving particles (electrons). The dielectric response and the electron energy loss are computed. The surface contribution to the energy loss exhibits an oscillatory behaviour in the transient regime near the surfaces. The propagation of an electromagnetic wave in these plasmas is treated by using the retarded electromagnetic potentials. The resulting integral equations are solved and the reflected and refracted waves are computed, as well as the reflection coefficient. For the slab we compute also the transmitted wave and the transmission coefficient. Generalized Fresnel's relations are...

  2. Time for pulse traversal through slabs of dispersive and negative ($\\epsilon$, $\\mu$) materials

    CERN Document Server

    Nanda, Lipsa

    2007-01-01

    The traversal times for an electromagnetic pulse traversing a slab of dispersive and dissipative material with negative dielectric permittivity ($\\epsilon$) and magnetic permeability ($\\mu$) have been calculated by using the average flow of electromagnetic energy in the medium. The effects of bandwidth of the pulse and dissipation in the medium have been investigated. While both large bandwidth and large dissipation have similar effects in smoothening out the resonant features that appear due to Fabry-P\\'{e}rot resonances, large dissipation can result in very small or even negative traversal times near the resonant frequencies. We have also investigated the traversal times and Wigner delay times for obliquely incident pulses and evanescent pulses. The coupling to slab plasmon polariton modes in frequency ranges with negative $\\epsilon$ or $\\mu$ is shown to result in large traversal times at the resonant conditions. We also find that the group velocity mainly contributes to the delay times for pulse propagatin...

  3. Guided Waves in Asymmetric Hyperbolic Slab Waveguides. The TM Mode Case

    CERN Document Server

    Lyashko, Ekaterina I

    2016-01-01

    Nonlinear guided wave modes in an asymmetric slab waveguide formed by an isotropic dielectric layer placed on a linear or nonlinear substrate and covered by a hyperbolic material are investigated. Optical axis is normal to the slab plane. The dispersion relations for TM waves are found. It is shown that there are additional cut-off frequencies for each TM mode. The effects of the nonlinearity on the dispersion relations are investigated and discussed. There are the modes, which are corresponded with situation where the peak of electric field is localized in the nonlinear substrate. These modes are absent in the linear waveguide. To excite these modes the power must exceed certain threshold value.

  4. Analysis and experimental study of the temperature and stress distribution in the slab of a solid-state heat capacity laser

    Science.gov (United States)

    Yang, Jiankun; Wan, Xuebin; Xu, Xiaojun; Lu, Qisheng

    2008-03-01

    In conventional cooling operation, thermal effects and stress distribution in slabs of solid-state laser are presented by many workers, it is different with that in the solid state heat capacity laser. In this paper, the transient temperature and stress distribution in Xeon flash lamps pumped slabs for single-shot and repetitively pulsed operations will be produced in the heat capacity operation. A high speed CCD camera was used to set up an experiment system to measure the interference fringes, from these fringes' changes, the extension of the slab due to the stress and thermal expansion can be obtained. Since dielectric materials are inherently several factors stronger in compression than in tension, this temperature reversal in heat capacity operation increases the inherent fracture limit of the system and allows a heat capacity operated laser to be pumped much harder than a conventionally operated slab laser.

  5. Effects of change in slab geometry on the mantle flow and slab fabric in Southern Peru

    Science.gov (United States)

    Knezevic Antonijevic, Sanja; Wagner, Lara S.; Beck, Susan L.; Long, Maureen D.; Zandt, George; Tavera, Hernando

    2016-10-01

    The effects of complex slab geometries on the surrounding mantle flow field are still poorly understood. Here we combine shear wave velocity structure with Rayleigh wave phase anisotropy to examine these effects in southern Peru, where the slab changes its geometry from steep to flat. To the south, where the slab subducts steeply, we find trench-parallel anisotropy beneath the active volcanic arc that we attribute to the mantle wedge and/or upper portions of the subducting plate. Farther north, beneath the easternmost corner of the flat slab, we observe a pronounced low-velocity anomaly. This anomaly is caused either by the presence of volatiles and/or flux melting that could result from southward directed, volatile-rich subslab mantle flow or by increased temperature and/or decompression melting due to small-scale vertical flow. We also find evidence for mantle flow through the tear north of the subducting Nazca Ridge. Finally, we observe anisotropy patterns associated with the fast velocity anomalies that reveal along strike variations in the slab's internal deformation. The change in slab geometry from steep to flat contorts the subducting plate south of the Nazca Ridge causing an alteration of the slab petrofabric. In contrast, the torn slab to the north still preserves the primary (fossilized) petrofabric first established shortly after plate formation.

  6. Magnetohydrodynamic Waves in an Asymmetric Magnetic Slab

    Science.gov (United States)

    Allcock, Matthew; Erdélyi, Robert

    2017-02-01

    Analytical models of solar atmospheric magnetic structures have been crucial for our understanding of magnetohydrodynamic (MHD) wave behaviour and in the development of the field of solar magneto-seismology. Here, an analytical approach is used to derive the dispersion relation for MHD waves in a magnetic slab of homogeneous plasma enclosed on its two sides by non-magnetic, semi-infinite plasma with different densities and temperatures. This generalises the classic magnetic slab model, which is symmetric about the slab. The dispersion relation, unlike that governing a symmetric slab, cannot be decoupled into the well-known sausage and kink modes, i.e. the modes have mixed properties. The eigenmodes of an asymmetric magnetic slab are better labelled as quasi-sausage and quasi-kink modes. Given that the solar atmosphere is highly inhomogeneous, this has implications for MHD mode identification in a range of solar structures. A parametric analysis of how the mode properties (in particular the phase speed, eigenfrequencies, and amplitudes) vary in terms of the introduced asymmetry is conducted. In particular, avoided crossings occur between quasi-sausage and quasi-kink surface modes, allowing modes to adopt different properties for different parameters in the external region.

  7. Accidents due to falls from roof slabs

    Directory of Open Access Journals (Sweden)

    Bruno Alves Rudelli

    Full Text Available CONTEXT AND OBJECTIVE Falls from the roof slabs of houses are accidents of high potential severity that occur in large Brazilian cities and often affect children and adolescents. The aims of this study were to characterize the factors that predispose towards this type of fall involving children and adolescents, quantify the severity of associated lesions and suggest preventive measures. DESIGN AND SETTING Descriptive observational prospective longitudinal study in two hospitals in the metropolitan region of São Paulo. METHODS Data were collected from 29 cases of falls from roof slabs involving children and adolescents between October 2008 and October 2009. RESULTS Cases involving males were more prevalent, accounting for 84%. The predominant age group was schoolchildren (7 to 12 years old; 44%. Leisure activities were most frequently being practiced on the roof slab at the time of the fall (86%, and flying a kite was the most prevalent game (37.9%. In 72% of the cases, the children were unaccompanied by an adult responsible for them. Severe conditions such as multiple trauma and traumatic brain injuries resulted from 79% of the accidents. CONCLUSION Falls from roof slabs are accidents of high potential severity, and preventive measures aimed towards informing parents and guardians about the dangers and risk factors associated with this type of accident are needed, along with physical protective measures, such as low walls around the slab and gates with locks to restrict free access to these places.

  8. Accidents due to falls from roof slabs.

    Science.gov (United States)

    Rudelli, Bruno Alves; Silva, Marcelo Valerio Alabarce da; Akkari, Miguel; Santili, Claudio

    2013-01-01

    CONTEXT AND OBJECTIVE Falls from the roof slabs of houses are accidents of high potential severity that occur in large Brazilian cities and often affect children and adolescents. The aims of this study were to characterize the factors that predispose towards this type of fall involving children and adolescents, quantify the severity of associated lesions and suggest preventive measures. DESIGN AND SETTING Descriptive observational prospective longitudinal study in two hospitals in the metropolitan region of São Paulo. METHODS Data were collected from 29 cases of falls from roof slabs involving children and adolescents between October 2008 and October 2009. RESULTS Cases involving males were more prevalent, accounting for 84%. The predominant age group was schoolchildren (7 to 12 years old; 44%). Leisure activities were most frequently being practiced on the roof slab at the time of the fall (86%), and flying a kite was the most prevalent game (37.9%). In 72% of the cases, the children were unaccompanied by an adult responsible for them. Severe conditions such as multiple trauma and traumatic brain injuries resulted from 79% of the accidents. CONCLUSION Falls from roof slabs are accidents of high potential severity, and preventive measures aimed towards informing parents and guardians about the dangers and risk factors associated with this type of accident are needed, along with physical protective measures, such as low walls around the slab and gates with locks to restrict free access to these places.

  9. Slab tears and intermediate-depth seismicity

    Science.gov (United States)

    Meighan, Hallie E.; Ten Brink, Uri; Pulliam, Jay

    2013-01-01

    Active tectonic regions where plate boundaries transition from subduction to strike slip can take several forms, such as triple junctions, acute, and obtuse corners. Well-documented slab tears that are associated with high rates of intermediate-depth seismicity are considered here: Gibraltar arc, the southern and northern ends of the Lesser Antilles arc, and the northern end of Tonga trench. Seismicity at each of these locations occurs, at times, in the form of swarms or clusters, and various authors have proposed that each marks an active locus of tear propagation. The swarms and clusters start at the top of the slab below the asthenospheric wedge and extend 30–60 km vertically downward within the slab. We propose that these swarms and clusters are generated by fluid-related embrittlement of mantle rocks. Focal mechanisms of these swarms generally fit the shear motion that is thought to be associated with the tearing process.

  10. Studies on Punching Shear Resistance of Two Way Slab Specimens with Partial Replacement of Cement by GGBS with Different Edge Conditions

    Science.gov (United States)

    Nemani, Ravi Dakshina Murthy; Rao, M. V. S.; Grandhe, Veera Venkata Satya Naranyana

    2016-09-01

    The present work is an effort to quantify the punching shear load resistance effect on two way simply supported slab specimens with replacement of cement by Ground Granulated Blast Furnace Slag (GGBS) with different edge conditions at various replacement levels and evaluate its efficiency. GGBS replacement has emerged as a major alternative to conventional concrete and has rapidly drawn the concrete industry attention due to its cement savings, cost savings, environmental and socio-economic benefits. The two way slab specimens were subjected to punching shear load by in house fabricated apparatus. The slab specimens were cast using M30 grade concrete with HYSD bars. The cement was partially replaced with GGBS at different percentages i.e., 0 to 30 % at regular intervals of 10 %. The test results indicate that the two way slab specimens with partial replacement of cement by GGBS exhibit high resistance against punching shear when compared with conventional concretes slab specimens.

  11. The radontechnical process of the sub-slab suction system in detached, semi-detached and terraced houses; Imupistejaerjestelmaen radontekninen toiminta eri tyyppisissae pien- ja rivitaloissa

    Energy Technology Data Exchange (ETDEWEB)

    Kettunen, A.V.; Rissanen, R.; Viljanen, M. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Structural Engineering and Building Physics; Arvela, H. [Finnish Centre for Radiation and Nuclear Safety, Helsinki (Finland)

    1997-12-31

    The sub-slab suction system is a repair method for decreasing radon transfer from soil to indoor air in houses. The sub-slab suction system changes the flow field with the aim to reduce the radon content under the ground slab or/and changes the flow direction from indoor air to foundation soil. The study is divided into the theoretical and experimental part. The theoretical part concentrates on solving the factors affecting the sub-slab suction system taking into consideration features of old houses. The experimental part uses the results of the theoretical part when the level and the type of the suction point had been chosen. The effect of the sub-slab suction system was tested with pressure difference experiments and the radon content measurements in 26 different, typical Finnish detached, semi-detached and terrace houses.

  12. Plasmonic Photonic-Crystal Slabs: Visualization of the Bloch Surface Wave Resonance for an Ultrasensitive, Robust and Reusable Optical Biosensor

    Directory of Open Access Journals (Sweden)

    Alexander V. Baryshev

    2014-12-01

    Full Text Available A one-dimensional photonic crystal (PhC with termination by a metal film—a plasmonic photonic-crystal slab—has been theoretically analyzed for its optical response at a variation of the dielectric permittivity of an analyte and at a condition simulating the molecular binding event. Visualization of the Bloch surface wave resonance (SWR was done with the aid of plasmon absorption in a dielectric/metal/dielectric sandwich terminating a PhC. An SWR peak in spectra of such a plasmonic photonic crystal (PPhC slab comprising a noble or base metal layer was shown to be sensitive to a negligible variation of refractive index of a medium adjoining to the slab. As a consequence, the considered PPhC-based optical sensors exhibited an enhanced sensitivity and a good robustness in comparison with the conventional surface-plasmon and Bloch surface wave sensors. The PPhC biosensors can be of practical importance because the metal layer is protected by a capping dielectric layer from contact with analytes and, consequently, from deterioration.

  13. Photon transport in thin disordered slabs

    Indian Academy of Sciences (India)

    Venkatesh Gopal; S Anantha Ramakrishna; A K Sood; N Kumar

    2001-06-01

    We examine using Monte Carlo simulations, photon transport in optically `thin’ slabs whose thickness is only a few times the transport mean free path *, with particles of different scattering anisotropies. The confined geometry causes an auto-selection of only photons with looping paths to remain within the slab. The results of the Monte Carlo simulations are borne out by our analytical treatment that incorporates directional persistence by the use of the Ornstein–Uhlenbeck process, which interpolates between the short time ballistic and long time diffusive regimes.

  14. Dielectrics in electric fields

    CERN Document Server

    Raju, Gorur G

    2003-01-01

    Discover nontraditional applications of dielectric studies in this exceptionally crafted field reference or text for seniors and graduate students in power engineering tracks. This text contains more than 800 display equations and discusses polarization phenomena in dielectrics, the complex dielectric constant in an alternating electric field, dielectric relaxation and interfacial polarization, the measurement of absorption and desorption currents in time domains, and high field conduction phenomena. Dielectrics in Electric Fields is an interdisciplinary reference and text for professionals and students in electrical and electronics, chemical, biochemical, and environmental engineering; physical, surface, and colloid chemistry; materials science; and chemical physics.

  15. Lattices of dielectric resonators

    CERN Document Server

    Trubin, Alexander

    2016-01-01

    This book provides the analytical theory of complex systems composed of a large number of high-Q dielectric resonators. Spherical and cylindrical dielectric resonators with inferior and also whispering gallery oscillations allocated in various lattices are considered. A new approach to S-matrix parameter calculations based on perturbation theory of Maxwell equations, developed for a number of high-Q dielectric bodies, is introduced. All physical relationships are obtained in analytical form and are suitable for further computations. Essential attention is given to a new unified formalism of the description of scattering processes. The general scattering task for coupled eigen oscillations of the whole system of dielectric resonators is described. The equations for the  expansion coefficients are explained in an applicable way. The temporal Green functions for the dielectric resonator are presented. The scattering process of short pulses in dielectric filter structures, dielectric antennas  and lattices of d...

  16. Mantle circulation and the lateral migration of subducted slabs

    Science.gov (United States)

    Garfunkel, Z.; Anderson, C. A.; Schubert, G.

    1986-01-01

    The geometry of transverse migration of subducted lithospheric slabs is examined, and the way in which this influences the flow in the mantle is studied. The migration of subducted slabs generally appears to be retrograde (at rates of 10-25 mm/yr), so that the descent of material is actually steeper than the slab dip. Retrograde slab migration is probably caused by the tendence of negatively buoyant slabs to sink in the surrounding mantle. The properties of the flow driven by such retrograde slab migration are explored in simple two-dimensional models. The results are used as a guide to infer the contribution of retrograde slab motion to the more complex mantle flow and to examine some consequences of the additional component of mantle flow. It is shown that slab migration is an important factor that causes mantle flow to be geometrically complex and time dependent.

  17. Lifetime Reliability Assessment of Concrete Slab Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    A procedure for lifetime assesment of the reliability of short concrete slab bridges is presented in the paper. Corrosion of the reinforcement is the deterioration mechanism used for estimating the reliability profiles for such bridges. The importance of using sensitivity measures is stressed. Fi...

  18. Retrofitting of RC Slabs Against Explosive Loads

    Institute of Scientific and Technical Information of China (English)

    WU Chengqing; OEHLERS Deric John; XIA Shaohua

    2006-01-01

    With the increase of terrorist bomb attacks on buildings,there is a need to develop advanced retrofitting techniques to strengthen structures against blast loads.Currently,several guidelines including an Australian version for retrofitting reinforced concrete (RC) structures are available for the design of retrofitting systems against seismic and monotonic loads using steel or fibre reinforced polymer (FRP) plates that can be either adhesively bonded to the surface or near surface mounted to the concrete cover.However,none of these guidelines provide advice suitable for retrofitting structures subjected to blast loads.In this paper,numerical models are used to simulate the performance of retrofitted RC slabs subjected to blast loads.Airblast pressure distributions on the surface of the slabs estimated in a previous study are used as input in the analysis.A material damage model developedpreviously for concrete and an elastoplastic model for steel bars are employed in this research for modelling reinforced concrete behaviour due to explosive loads.The material models and blast loading are coded into a finite element computer program LS-DYNA3D to do the analysis.With the numerical model,parametric studies are conducted to investigate RC slabs retrofitted by either externally bonded or near-surface mounted plates or GFRP sheets subjected to blast loads.Discussion is made on the effectiveness of the retrofitting system for RC slabs against blast loads.

  19. Numerical Evaluations of Functionally Graded RC Slabs

    Directory of Open Access Journals (Sweden)

    M. Mastali

    2014-01-01

    Full Text Available Nowadays, using fibrous materials is used widely in strengthening applications such as cross-section enlargement and using functionally graded reinforced concrete. Functionally graded reinforced concrete is used as multireinforced concrete layers that can be reinforced by different fiber types. The objective of this research was to address the structural benefits of functionally graded concrete materials by performing analytical simulations. In order to achieve this purpose, in the first stage of this study, three functionally graded reinforced concretes by steel and polypropylene (PP were experimentally tested under flexural loading. Inverse analysis was applied to obtain the used material properties of reinforced concrete by FEMIX software. After obtaining the material properties, to assess the performance of proposed slabs, some other cases were proposed and numerically evaluated under flexural and shear loading. The results showed that increasing steel fiber in reinforced entire cross section led to achieve better shear and flexural performance while the best performance of reinforced functionally graded slabs was achieved for slab at 1% fiber content. In the second stage, nineteen reinforced functionally graded RC slabs with steel bars were simulated and assessed and some other cases were considered which were not experimentally tested.

  20. Longitudinal shear resistance of composite slabs

    NARCIS (Netherlands)

    Schuurman, R.G.; Stark, J.W.B.

    1996-01-01

    Verification methods for longitudinal shear. currently in use, are empirical. This applies for both the m-k method as the Partial Shear Connection method. Parameters and mechanisms determining the behaviour of the shear connection in composite slabs are not directly considered in these methods. A

  1. Plastic design of continuous composite slabs

    NARCIS (Netherlands)

    Stark, J.W.B.; Brekelmans, J.W.P.M.

    1996-01-01

    Most current regulations for continuous composite slabs contain rules that limit the application of plastic analysis in the design process. In this paper, results of numerical studies for positive and negative bending and experimental results for negative bending are presented. From these

  2. Benchmark Experiment for Beryllium Slab Samples

    Institute of Scientific and Technical Information of China (English)

    NIE; Yang-bo; BAO; Jie; HAN; Rui; RUAN; Xi-chao; REN; Jie; HUANG; Han-xiong; ZHOU; Zu-ying

    2015-01-01

    In order to validate the evaluated nuclear data on beryllium,a benchmark experiment has been performed at China Institution of Atomic Energy(CIAE).Neutron leakage spectra from pure beryllium slab samples(10cm×10cm×11cm)were measured at 61°and 121°using timeof-

  3. All-polymer photonic crystal slab sensor

    DEFF Research Database (Denmark)

    Hermannsson, Pétur Gordon; Sørensen, Kristian Tølbøl; Vannahme, Christoph;

    2015-01-01

    An all-polymer photonic crystal slab sensor is presented, and shown to exhibit narrow resonant reflection with a FWHM of less than 1 nm and a sensitivity of 31 nm/RIU when sensing media with refractive indices around that of water. This results in a detection limit of 4.5x10-6 RIU when measured...

  4. Effects of Edge Restraint on Slab Behavior

    Science.gov (United States)

    1986-02-01

    manufactured limestone sand fine aggregate. Two batches were prepared, one for each of the different thickness slab groups. A total of thirty-eight 4...Building Code Require- ments" 1983; Detroit, Mich. 4. T. Takehira, A. T. Derecho , and M. Iqbal; "Design Criteria for De- flection Capacity of

  5. Cost analysis of reinforced concrete slabs and columns

    OpenAIRE

    Spuś, Piotr

    2013-01-01

    The construction industry is increasingly looking for solutions that are both simple and effective and that provide cost savings, speed and flexibility of execution. Two-way slabs are a form of construction unique to reinforced concrete comparing with the other major structural materials. It is an efficient, economical, and widely used structural system. The present dissertation aims to analyze and compare costs between four types of slabs: waffle slab with recuperate molds, flat slabs wit...

  6. Abrupt tectonics and rapid slab detachment with grain damage

    OpenAIRE

    2015-01-01

    Subduction zones are delineated by Earth’s ocean trenches, and are where tectonic plates sink into the mantle as cold heavy slabs, which in turn drive plate motion. But slabs can detach from their surface plates, thus altering tectonic driving forces. Slab detachment can occur if thick crust from continents or oceanic plateaux is swept by plate motion into the subduction zone, thus plugging it up. Detachment is also accelerated because mineral grains in the slab become smaller during deformat...

  7. Reinforcement of the concrete base slab of the ATLAS cavern

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 02: UX15 cavern, preparation for concreting of base slab first lift. Photo 05: UX15 cavern, placing of reinforcement for base slab first lift. Photo 07: UX15 cavern, preparation for concreting of base slab first lift. Photo 09: UX15 cavern, placing of reinforcement for base slab first lift. Photo 10: UX15 cavern, view into PX14 shaft above. Photo 12: UX15 cavern, temporary access platform of RB16 tunnel. Photo 15: UJ17 chamber, invert excavation.

  8. Examining spring wet slab and glide avalanche occurrence along the Going-to-the-Sun Road corridor, Glacier National Park, Montana, USA

    Science.gov (United States)

    Peitzsch, Erich H.; Hendrikx, Jordy; Fagre, Daniel B.; Reardon, Blase

    2012-01-01

    Wet slab and glide snow avalanches are dangerous and yet can be particularly difficult to predict. Wet slab and glide avalanches are presumably triggered by free water moving through the snowpack and the subsequent interaction with layer or ground interfaces, and typically occur in the spring during warming and subsequent melt periods. In Glacier National Park (GNP), Montana, both types of avalanches can occur in the same year and affect the spring opening operations of the Going-to-the-Sun Road (GTSR).

  9. Mantle Response to a Slab Gap and Three-dimensional Slab Interaction in Central America

    Science.gov (United States)

    Jadamec, M. A.; Fischer, K. M.

    2013-12-01

    Seismically constrained global slab geometries suggest the Middle America-South American subduction system contains a gap on the order of 500 km separating the east-dipping Cocos and Nazca slabs at depth (Gudmundsson and Sambridge, 1998; Syracuse and Abers, 2006; Hayes et al., 2012). The location of the gap correlates with tectonic features impinging on the Pacific side of the Middle America trench, in particular the incoming young buoyant oceanic lithosphere and oceanic ridges associated with the Galapagos hotspot and Cocos-Nazca spreading center (Protti et al., 1994; Mann et al., 2007; Muller et al., 2008). Moreover, geochemical studies focusing on the arc chemistry in the Central American volcanic front argue for a slab window of some kind in this region (Johnston and Thorkelson, 1997; Abratis and Worner, 2001; Hoernle et al., 2008). We use high-resolution, three-dimensional (3D) geodynamic modeling of the Middle America-South American subduction system to investigate the role of the incoming young oceanic lithosphere and a gap between the Cocos and Nazca slabs in controlling mantle flow velocity and geochemical signatures beneath Central America. The geodynamic models are geographically referenced with the geometry and thermal structure for the overriding and subducting plates based on geological and geophysical observables and constructed with the multi-plate subduction generator code, SlabGenerator (Jadamec and Billen, 2010; Jadamec et al., 2012; Jadamec and Billen, 2012). The viscous flow simulations are solved using the mantle convection finite-element code, CitcomCU (Zhong, 2006), modified by Jadamec and Billen (2010) to take into account the experimentally derived flow law for olivine and allow for variable 3D plate interface geometries and magnitudes of inter-plate coupling. The 3D numerical models indicate the gap between the Cocos and Nazca slabs serves as a conduit for Pacific-Cocos mantle to pass into the Caribbean, with toroidal flow around the

  10. Characterization of dielectric materials

    Energy Technology Data Exchange (ETDEWEB)

    King, Danny J.; Babinec, Susan; Hagans, Patrick L.; Maxey, Lonnie C.; Payzant, Edward A.; Daniel, Claus; Sabau, Adrian S.; Dinwiddie, Ralph B.; Armstrong, Beth L.; Howe, Jane Y.; Wood, III, David L.; Nembhard, Nicole S.

    2017-06-27

    A system and a method for characterizing a dielectric material are provided. The system and method generally include applying an excitation signal to electrodes on opposing sides of the dielectric material to evaluate a property of the dielectric material. The method can further include measuring the capacitive impedance across the dielectric material, and determining a variation in the capacitive impedance with respect to either or both of a time domain and a frequency domain. The measured property can include pore size and surface imperfections. The method can still further include modifying a processing parameter as the dielectric material is formed in response to the detected variations in the capacitive impedance, which can correspond to a non-uniformity in the dielectric material.

  11. Resonant dielectric metamaterials

    Science.gov (United States)

    Loui, Hung; Carroll, James; Clem, Paul G; Sinclair, Michael B

    2014-12-02

    A resonant dielectric metamaterial comprises a first and a second set of dielectric scattering particles (e.g., spheres) having different permittivities arranged in a cubic array. The array can be an ordered or randomized array of particles. The resonant dielectric metamaterials are low-loss 3D isotropic materials with negative permittivity and permeability. Such isotropic double negative materials offer polarization and direction independent electromagnetic wave propagation.

  12. HEAT TRANSFER ANALYSIS DURING ROLLING OF THIN SLAB IN CSP

    Institute of Scientific and Technical Information of China (English)

    W.F. Wu; Y.H. Feng; X.X. Zhang

    2006-01-01

    A mathematical model has been built to numerically predict the thermal history of thin slab during CSP (compact strip process) rolling. To estimate the temperature distribution in the slab more accurately, the mathematical model combines heat transfer in the slab, in the roll, and at the roll-slab interface during bite. The numerical results agree with on-site running data, which proves the reliability of the mathematical model. The results show that roll chilling has a significant effect on the temperature distribution in the slab.

  13. Seismic capacity evaluation of post-tensioned concrete slab-column frame buildings by pushover analysis

    Directory of Open Access Journals (Sweden)

    Nuttawut Intaboot

    2006-09-01

    Full Text Available Seismic capacity evaluation of post-tensioned concrete slab-column frame buildings designed only for gravity loads and wind load is presented. The series of nonlinear pushover analyses are carried out by using the computer program SAP2000. An equivalent frame model with explicit transverse torsional members is introduced for modeling slab-column connections. The analyses are carried out by ollowingguidelines in ATC-40 and FEMA-273/274, where several important factors such as P-Delta effects, strength and stiffness contributions from masonry infill walls, and foundation flexibility are well taken into account. The pushover analysis results, presented in the form of capacity curves, are compared with the seismic demand from the expected earthquake ground motion for Bangkok and then the seismic performance can be evaluated. Numerical examples are performed on the 9- and 30-storey post-tension flat-plate buildings in Bangkok. The results show that in general post-tensioned concrete slab-column frame buildings without shear wall possess relatively low lateral stiffness, low lateral strength capacity, and poor inelastic response characteristics. The evaluation also shows that the slab-column frame combined with the shear wall system and drop panel can increase the strength and stiffness significantly.

  14. Thin-slab casting – New possibilities

    Indian Academy of Sciences (India)

    Amit Chatterjee; Sanjay Chandra

    2001-02-01

    Changes in the IT industry are known to proceed at a scorching pace. In sharp contrast, the rate of development in the steel industry is generally slow. Nonetheless, The impact of recent technical developments on the steel industry has been quite significant. The production chain from iron ore to final rolled steel is a long one and the shortening of this length has long been the endeavour of scientists and engineers. The initial development came in the form of speeding up the process of steelmaking by reducing the slow open-hearth process (8 h tap-to-tap time) with the 45 min tap-tp-tap time of the Basic Oxygen Furnace (BOF) process. Significant developments thereafter have been in the process of continuous production of billets and blooms from liquid steel thereby doing away with the large blooming mills needed for rolling ingots. For a fairly long time after the stabilisation of continuous casting. hot rolling involved reheating thick (200-250 mm) slabs and reducing them in a hot-strip mill. The advent of thin-slab casters has made even these large hot-strip mills redundant. The new installtion produce thin slabs (50-70 mm) that are directly rolled into strips without the need of an intermediate furnace for raising the stock temperature; the so-called tunnel furance prior to the rolling stands serving only to equalise stock temperatures. Additionally, what started as a step for reducing investment in hot rolling has, in fact, given new opportunity for direct hot rolling of thickness that were, for long, considered to be feasible only through the cold-rolling route. This article discuss the slow but steady encroachment of hot-rolled sheets into the domain of strip thickness hitherto produced by cold rolling and tries to show how the development of thin-slab casters has allowed this process to be accelerated. A techno-economic analysis of thin-slab casting has been presented along with the benefits that arise when a thin-slab caster is linked to the blast furnace

  15. Method of making dielectric capacitors with increased dielectric breakdown strength

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Beihai; Balachandran, Uthamalingam; Liu, Shanshan

    2017-05-09

    The invention is directed to a process for making a dielectric ceramic film capacitor and the ceramic dielectric laminated capacitor formed therefrom, the dielectric ceramic film capacitors having increased dielectric breakdown strength. The invention increases breakdown strength by embedding a conductive oxide layer between electrode layers within the dielectric layer of the capacitors. The conductive oxide layer redistributes and dissipates charge, thus mitigating charge concentration and micro fractures formed within the dielectric by electric fields.

  16. Evidence of fire resistance of hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes...... is therefore going on in the Netherlands about the fire resistance of hollow-core slabs. In 2014 the producers of hollow-core slabs have published a report of a project called Holcofire containing a collection of 162 fire tests on hollow-core slabs giving for the first time an overview of the fire tests made....... The present paper analyses the evidence now available for assessment of the fire resistance of extruded hollow-core slabs. The 162 fire tests from the Holcofire report are compared against the requirements for testing from the product standard for hollow-core slabs EN1168 and knowledge about the possible...

  17. Radiative transfer model for contaminated rough slabs

    CERN Document Server

    Andrieu, François; Schmidt, Frédéric; Schmitt, Bernard

    2015-01-01

    We present a semi-analytical model to simulate bidirectional reflectance distribution function (BRDF) spectra of a rough slab layer containing impurities. This model has been optimized for fast computation in order to analyze hyperspectral data. We designed it for planetary surfaces ices studies but it could be used for other purposes. It estimates the bidirectional reflectance of a rough slab of material containing inclusions, overlaying an optically thick media (semi-infinite media or stratified media, for instance granular material). The inclusions are supposed to be close to spherical, and of any type of other material than the ice matrix. It can be any type of other ice, mineral or even bubbles, defined by their optical constants. We suppose a low roughness and we consider the geometrical optics conditions. This model is thus applicable for inclusions larger than the considered wavelength. The scattering on the inclusions is assumed to be isotropic. This model has a fast computation implementation and th...

  18. Subduction zone earthquakes and stress in slabs

    Science.gov (United States)

    Vassiliou, M. S.; Hager, B. H.

    1988-01-01

    Simple viscous fluid models of subducting slabs are used to explain observations of the distribution of earthquakes as a function of depth and the orientation of stress axes of deep (greater than 300 km) and intermediate (70-300 km) earthquakes. Results suggest the following features in the distribution of earthquakes with depth: (1) an exponential decrease from shallow depths down to 250 to 300 km, (2) a minimum near 250 to 300 km, and (3) a deep peak below 300 km. Many shallow subducting slabs show only the first characteristic, while deeper extending regions tend to show all three features, with the deep peak varying in position and intensity. These data, combined with the results on the stress orientations of various-depth earthquakes, are consistent with the existence of a barrier of some sort at 670-km depth and a uniform viscosity mantle above this barrier.

  19. Behavior of Partially Restrained Reinforced Concrete Slabs.

    Science.gov (United States)

    1986-09-01

    Takehira, Derecho , and Iqbal [34] followed a similar approach to arrive at recommended design criteria for 1 the Naval Facilities Engineering Command...Datta, T. K., "Ultimate Strength of Reinforced Concrete Slab-Beam Systems: A New Approach," r Indian Concrete Journal, Bombay, India , Vol. 47, 1973, pp...Journal of Solids and Structures, Vol. 1, 1965, pp. 97-111. 34. Takehira, T., Derecho , A.T., and Iqbal, M., "Design Criteria for Deflection Capacity

  20. Electrostatics in Periodic Slab Geometries II

    OpenAIRE

    de Joannis, Jason; Arnold, Axel; Holm, Christian

    2002-01-01

    In a previous paper a method was developed to subtract the interactions due to periodically replicated charges (or other long-range entities) in one spatial dimension. The method constitutes a generalized "electrostatic layer correction" (ELC) which adapts any standard 3D summation method to slab-like conditions. Here the implementation of the layer correction is considered in detail for the standard Ewald (EW3DLC) and the PPPM mesh Ewald (PPPMLC) methods. In particular this method offers a s...

  1. Continental underplating after slab break-off

    Science.gov (United States)

    Magni, V.; Allen, M. B.; van Hunen, J.; Bouilhol, P.

    2017-09-01

    We present three-dimensional numerical models to investigate the dynamics of continental collision, and in particular what happens to the subducted continental lithosphere after oceanic slab break-off. We find that in some scenarios the subducting continental lithosphere underthrusts the overriding plate not immediately after it enters the trench, but after oceanic slab break-off. In this case, the continental plate first subducts with a steep angle and then, after the slab breaks off at depth, it rises back towards the surface and flattens below the overriding plate, forming a thick horizontal layer of continental crust that extends for about 200 km beyond the suture. This type of behaviour depends on the width of the oceanic plate marginal to the collision zone: wide oceanic margins promote continental underplating and marginal back-arc basins; narrow margins do not show such underplating unless a far field force is applied. Our models show that, as the subducted continental lithosphere rises, the mantle wedge progressively migrates away from the suture and the continental crust heats up, reaching temperatures >900 °C. This heating might lead to crustal melting, and resultant magmatism. We observe a sharp peak in the overriding plate rock uplift right after the occurrence of slab break-off. Afterwards, during underplating, the maximum rock uplift is smaller, but the affected area is much wider (up to 350 km). These results can be used to explain the dynamics that led to the present-day crustal configuration of the India-Eurasia collision zone and its consequences for the regional tectonic and magmatic evolution.

  2. Benchmark Experiment for Beryllium Slab Samples

    Institute of Scientific and Technical Information of China (English)

    NIE; Yang-bo; BAO; Jie; HAN; Rui; RUAN; Xi-chao; REN; Jie; HUANG; Han-xiong; ZHOU; Zu-ying

    2013-01-01

    The neutron leakage spectra were measured at 60°from pure beryllium slab samples(10 cm×10 cm×5 cm and 10 cm×10 cm×11 cm)by TOF method.The experimental results were compared with the calculated ones by MCNP5 simulation,using the evaluated data of beryllium from CENDL3.1,

  3. Wave Scattering by Superluminal Spacetime Slab

    CERN Document Server

    Deck-Léger, Zoé-Lise

    2016-01-01

    Spacetime media offers new opportunities for wave manipulation. Here we study superluminal slabs, and show that the amplitudes of the reflected waves are controlled by the velocity of the medium. In addition, the backward wave continuously scans from the specular to the collinear angle. A diagrammatic method is provided for insight into the deflection angles. A fundamental symmetry between sub- and superluminal scattering is derived from this diagrammatic description.

  4. Convection in Slab and Spheroidal Geometries

    Science.gov (United States)

    Porter, David H.; Woodward, Paul R.; Jacobs, Michael L.

    2000-01-01

    Three-dimensional numerical simulations of compressible turbulent thermally driven convection, in both slab and spheroidal geometries, are reviewed and analyzed in terms of velocity spectra and mixing-length theory. The same ideal gas model is used in both geometries, and resulting flows are compared. The piecewise-parabolic method (PPM), with either thermal conductivity or photospheric boundary conditions, is used to solve the fluid equations of motion. Fluid motions in both geometries exhibit a Kolmogorov-like k(sup -5/3) range in their velocity spectra. The longest wavelength modes are energetically dominant in both geometries, typically leading to one convection cell dominating the flow. In spheroidal geometry, a dipolar flow dominates the largest scale convective motions. Downflows are intensely turbulent and up drafts are relatively laminar in both geometries. In slab geometry, correlations between temperature and velocity fluctuations, which lead to the enthalpy flux, are fairly independent of depth. In spheroidal geometry this same correlation increases linearly with radius over the inner 70 percent by radius, in which the local pressure scale heights are a sizable fraction of the radius. The effects from the impenetrable boundary conditions in the slab geometry models are confused with the effects from non-local convection. In spheroidal geometry nonlocal effects, due to coherent plumes, are seen as far as several pressure scale heights from the lower boundary and are clearly distinguishable from boundary effects.

  5. Convection in Slab and Spheroidal Geometries

    Science.gov (United States)

    Porter, David H.; Woodward, Paul R.; Jacobs, Michael L.

    2000-01-01

    Three-dimensional numerical simulations of compressible turbulent thermally driven convection, in both slab and spheroidal geometries, are reviewed and analyzed in terms of velocity spectra and mixing-length theory. The same ideal gas model is used in both geometries, and resulting flows are compared. The piecewise-parabolic method (PPM), with either thermal conductivity or photospheric boundary conditions, is used to solve the fluid equations of motion. Fluid motions in both geometries exhibit a Kolmogorov-like k(sup -5/3) range in their velocity spectra. The longest wavelength modes are energetically dominant in both geometries, typically leading to one convection cell dominating the flow. In spheroidal geometry, a dipolar flow dominates the largest scale convective motions. Downflows are intensely turbulent and up drafts are relatively laminar in both geometries. In slab geometry, correlations between temperature and velocity fluctuations, which lead to the enthalpy flux, are fairly independent of depth. In spheroidal geometry this same correlation increases linearly with radius over the inner 70 percent by radius, in which the local pressure scale heights are a sizable fraction of the radius. The effects from the impenetrable boundary conditions in the slab geometry models are confused with the effects from non-local convection. In spheroidal geometry nonlocal effects, due to coherent plumes, are seen as far as several pressure scale heights from the lower boundary and are clearly distinguishable from boundary effects.

  6. Excitation of the classical electromagnetic field in a cavity containing a thin slab with a time-dependent conductivity

    CERN Document Server

    Dodonov, V V

    2016-01-01

    An exact infinite set of coupled ordinary differential equations, describing the evolution of the modes of the classical electromagnetic field inside an ideal cavity, containing a thin slab with the time-dependent conductivity $\\sigma(t)$ and dielectric permittivity $\\varepsilon(t)$, is derived for the dispersion-less media. This problem is analyzed in connection with the attempts to simulate the so called Dynamical Casimir Effect in three-dimensional electromagnetic cavities, containing a thin semiconductor slab, periodically illuminated by strong laser pulses. Therefore it is assumed that functions $\\sigma(t)$ and $\\delta\\varepsilon(t)=\\varepsilon(t)-\\varepsilon(0)$ are different from zero during short time intervals (pulses) only. The main goal is to find the conditions, under which the initial nonzero classical field could be amplified after a single pulse (or a series of pulses). Approximate solutions to the dynamical equations are obtained in the cases of "small" and "big" maximal values of the function...

  7. Contemporary dielectric materials

    CERN Document Server

    Saravanan, R

    2016-01-01

    This book deals with experimental results of the physical characterization of several important, dielectric materials of great current interest. The experimental tools used for the analysis of these materials include X-ray diffraction, dielectric measurements, magnetic measurements using a vibrating sample magnetometer, optical measurements using a UV-Visible spectrometer etc.

  8. Dielectric material for dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Moran, P.R.; Podgorsak, E.; Fullerton, G.D.; Fuller, G.E.

    1976-01-27

    A RITAD dosimeter is described having a dielectric material such as sapphire wherein the efficiency as measured by mean drift distance and trapping efficiency is increased by making use of a dielectric material in which the total active impurity does not exceed 50 ppm and in which any one active impurity does not exceed 10 ppm.

  9. Light in complex dielectrics

    NARCIS (Netherlands)

    Schuurmans, F.J.P.

    1999-01-01

    In this thesis the properties of light in complex dielectrics are described, with the two general topics of "modification of spontaneous emission" and "Anderson localization of light". The first part focuses on the spontaneous emission rate of an excited atom in a dielectric host with variable refra

  10. Viscous Dissipation and Criticality of Subducting Slabs

    Science.gov (United States)

    Riedel, Mike; Karato, Shun; Yuen, Dave

    2016-04-01

    Rheology of subducting lithosphere appears to be complicated. In the shallow part, deformation is largely accomodated by brittle failure, whereas at greater depth, at higher confining pressures, ductile creep is expected to control slab strength. The amount of viscous dissipation ΔQ during subduction at greater depth, as constrained by experimental rock mechanics, can be estimated on the basis of a simple bending moment equation [1,2] 2ɛ˙0(z) ∫ +h/2 2 M (z) = h ṡ -h/2 4μ(y,z)y dy , (1) for a complex multi-phase rheology in the mantle transition zone, including the effects of a metastable phase transition as well as the pressure, temperature, grain-size and stress dependency of the relevant creep mechanisms; μ is here the effective viscosity and ɛ˙0(z) is a (reference) strain rate. Numerical analysis shows that the maximum bending moment, Mcrit, that can be sustained by a slab is of the order of 1019 Nm per m according to Mcrit˜=σp ∗h2/4, where σp is the Peierl's stress limit of slab materials and h is the slab thickness. Near Mcrit, the amount of viscous dissipation grows strongly as a consequence of a lattice instability of mantle minerals (dislocation glide in olivine), suggesting that thermo-mechanical instabilities become prone to occur at places where a critical shear-heating rate is exceeded, see figure. This implies that the lithosphere behaves in such cases like a perfectly plastic solid [3]. Recently available detailed data related to deep seismicity [4,5] seems to provide support to our conclusion. It shows, e.g., that thermal shear instabilities, and not transformational faulting, is likely the dominating mechanism for deep-focus earthquakes at the bottom of the transition zone, in accordance with this suggested "deep criticality" model. These new findings are therefore briefly outlined and possible implications are discussed. References [1] Riedel, M. R., Karato, S., Yuen, D. A. Criticality of Subducting Slabs. University of Minnesota

  11. Optical properties of metallo-dielectric microspheres in opal structures

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Y; Whitehouse, C; Li, Jensen; Tam, Wing Yim; Chan, C T; Sheng Ping [Department of Physics, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong (China)

    2003-09-03

    We report the fabrication of opal structure using metallo-dielectric silica microspheres. Mono-dispersed silica microspheres were coated with silver using an electrode-less wet-plating technique. Thin slabs of opal were obtained by assembling the silver-coated microspheres between two glass plates using a forced-packing method. The optical properties of the resulting opal structure were studied in the infrared range. Good agreement is obtained with the predictions of a multiple scattering approach, provided that the silver layer is modelled as a silver composite.

  12. Tectonic controls on earthquake size distribution and seismicity rate: slab buoyancy and slab bending

    Science.gov (United States)

    Nishikawa, T.; Ide, S.

    2014-12-01

    There are clear variations in maximum earthquake magnitude among Earth's subduction zones. These variations have been studied extensively and attributed to differences in tectonic properties in subduction zones, such as relative plate velocity and subducting plate age [Ruff and Kanamori, 1980]. In addition to maximum earthquake magnitude, the seismicity of medium to large earthquakes also differs among subduction zones, such as the b-value (i.e., the slope of the earthquake size distribution) and the frequency of seismic events. However, the casual relationship between the seismicity of medium to large earthquakes and subduction zone tectonics has been unclear. Here we divide Earth's subduction zones into over 100 study regions following Ide [2013] and estimate b-values and the background seismicity rate—the frequency of seismic events excluding aftershocks—for subduction zones worldwide using the maximum likelihood method [Utsu, 1965; Aki, 1965] and the epidemic type aftershock sequence (ETAS) model [Ogata, 1988]. We demonstrate that the b-value varies as a function of subducting plate age and trench depth, and that the background seismicity rate is related to the degree of slab bending at the trench. Large earthquakes tend to occur relatively frequently (lower b-values) in shallower subduction zones with younger slabs, and more earthquakes occur in subduction zones with deeper trench and steeper dip angle. These results suggest that slab buoyancy, which depends on subducting plate age, controls the earthquake size distribution, and that intra-slab faults due to slab bending, which increase with the steepness of the slab dip angle, have influence on the frequency of seismic events, because they produce heterogeneity in plate coupling and efficiently inject fluid to elevate pore fluid pressure on the plate interface. This study reveals tectonic factors that control earthquake size distribution and seismicity rate, and these relationships between seismicity and

  13. Evaluation of the Impact of Slab Foundation Heat Transfer on Heating and Cooling in Florida

    Energy Technology Data Exchange (ETDEWEB)

    Parker, D. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Kono, J. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Vieira, R. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Gu, L. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States)

    2016-09-01

    During the last three decades of energy-efficiency research, there has been limited study of heat transfer to slab-on-grade foundations in cooling-dominated climates. Most experimental research has focused on the impact of slab-on-grade foundations and insulation schemes on heat losses in heating-dominated climates. This is surprising because the floor area in single-family homes is generally equal to wall area, window area, or attic area, all of which have been extensively evaluated for heat-transfer properties. Moreover, slab foundations are the most common foundation type in cooling-dominated climates. Slab-on-grade construction is very popular in southern states, accounting for 77% of new home floors according to 2014 U.S. Census data. There is a widespread perception that tile flooring, as opposed to carpet, provides a cooler home interior in warm climates. Empirical research is needed because building energy simulation software programs running DOE-2 and EnergyPlus engines often rely on simplified models to evaluate the influence of flooring on interior temperature, even though in some cases more detailed models exist. The U.S. Department of Energy Building America Partnership for Improved Residential Construction (BA-PIRC) performed experiments in the Florida Solar Energy Center’s Flexible Residential Test Facility intended to assess for the first time (1) how slab-on-grade construction influences interior cooling in a cooling-dominated climate and (2) how the difference in a carpeted versus uncarpeted building might influence heating and cooling energy use. Two nominally identical side-by-side residential buildings were evaluated during the course of 1 year, from 2014 to 2015: the east building with a pad and carpet floor and the west building with a bare slab floor. A detailed grid shows temperature measurements taken on the slab surface at various locations as well as at depths of 1.0 ft, 2 ft, 5.0 ft, 10.0 ft, and 20.0 ft below the surface. Temperature

  14. Calculating seismic of slabs ITA NNP Garona; Calculo sismico de las losas del ATI de C.N. Santa maria de Garona

    Energy Technology Data Exchange (ETDEWEB)

    Ezeberry, J. I.; Guerrero, A.; Gamarra, J.; Beltran, F.

    2014-07-01

    This article describes the methodology that Idom has employed to perform the seismic evaluation of slabs within the ITA project of the NPP Santa Maria de Garona. Seismic calculations that have been conducted include consideration of the effects of the interaction of soil structure as well as the possible take-off containers with respect to slab during the earthquake. Therefore, the main contribution of the work is the study of the coupling of rolling containers with the flexibility of the whole ground-slab For calculations has been used ABAQUS/Explicit program, allowing to solve effectively the nonlinearities listed above using explicit integration algorithms over time. The results of the calculations reflect the importance of jointly analyse the seismic responses of slab and containers. (Author)

  15. A STUDY ON THE WHEELSET/SLAB TRACK VERTICAL INTERACTION

    Directory of Open Access Journals (Sweden)

    Traian MAZILU

    2012-05-01

    Full Text Available This paper deals with the interaction between a moving wheelset and a slab track due to the short-pitch corrugated rail. The wheelset is modeled using a free-free Timoshenko beam with attached rigid bodies as the axle boxes, wheels and brake discs. The slab track model consists of elastically supported double Euler-Bernoulli beams. In fact, both wheelset and slab track are symmetric structures and the issue of the wheelset/slab track interaction is reduced to the wheel/rail interaction. The nonlinear equations of motion describing the wheelset/slab track interaction due to the short-pitch corrugated rail are solved using the time-domain Green’s functions method and the convolution theorem. The wheelset/slab track interaction due to the short-pitch corrugated rail exhibits a critical velocity when the vibration reaches the maximum level

  16. Fabrication of a Prototype All-Dielectric Micro-Accelerator

    Science.gov (United States)

    Zhou, J.; McNeur, J.; Travish, G.; Rosenzweig, J. B.; Yoder, R. B.

    2010-11-01

    A laser-powered micron-scale, all-dielectric, slab-symmetric accelerator has been under development at UCLA for several years, with an experimental program underway. The device is built from dielectric Bragg reflectors and includes periodic nanoscale coupling structures, which requires micromanufacturing techniques and a cleanroom facility. We report here on results of fabrication experiments and the construction of a prototype device. A method for patterning the periodic coupling structures using electron beam lithography is described, and sputter deposition of thin films (such as ZrO2/SiO2) to create a distributed Bragg reflector is discussed. Future plan includes reflection and transmission measurements using the drive laser on prototype devices, and the resonance frequency and strength will be evaluated.

  17. Characterizing Dielectric Materials using Monostatic Transmission- and Reflection-Ellipsometry

    Science.gov (United States)

    Barowski, Jan; Rolfes, Ilona

    2017-03-01

    The characterization of dielectric materials at microwave frequencies can be done by various measurement principles. Free space methods are a commonly used approach if the material under test (MUT) has to be characterized in-situ or in a non-destructive manner. Since the transmission and reflection parameters of a finite sized dielectric slab typically depend on its thickness, accurate knowledge about this parameter is of high importance. The ellipsometric approach presented in this paper eliminates the thickness dependence and thus allows to reduce a major source of error. This is achieved by performing four measurements. These measure the transmission and reflection factors of the MUT in both polarizations at an incident angle of 45°. The high stability of the measurement allows a simple monostatic setup utilizing a single antenna. The measurements in this paper are performed using Polytetrafluoroethylene (PTFE) and Polyvinylchloride (PVC) blocks in the frequency range from 22 GHz to 26 GHz.

  18. Negative radiation pressure and negative effective refractive index via dielectric birefringence.

    Science.gov (United States)

    Nemirovsky, Jonathan; Rechtsman, Mikael C; Segev, Mordechai

    2012-04-09

    We show that light guided in a planar dielectric slab geometry incorporating a biaxial medium has lossless modes with group and phase velocities in opposite directions. Particles in a vacuum gap inserted into the structure experience negative radiation pressure: the particles are pulled by light rather than pushed by it. This effectively one-dimensional dielectric structure represents a new geometry for achieving negative radiation pressure in a wide range of frequencies with minimal loss. Moreover, this geometry provides a straightforward platform for experimentally resolving the Abrahams-Minkowski dilemma.

  19. Hybrid slab-microchannel gel electrophoresis system

    Science.gov (United States)

    Balch, Joseph W.; Carrano, Anthony V.; Davidson, James C.; Koo, Jackson C.

    1998-01-01

    A hybrid slab-microchannel gel electrophoresis system. The hybrid system permits the fabrication of isolated microchannels for biomolecule separations without imposing the constraint of a totally sealed system. The hybrid system is reusable and ultimately much simpler and less costly to manufacture than a closed channel plate system. The hybrid system incorporates a microslab portion of the separation medium above the microchannels, thus at least substantially reducing the possibility of non-uniform field distribution and breakdown due to uncontrollable leakage. A microslab of the sieving matrix is built into the system by using plastic spacer materials and is used to uniformly couple the top plate with the bottom microchannel plate.

  20. Photonic crystal slab quantum well infrared photodetector

    Science.gov (United States)

    Kalchmair, S.; Detz, H.; Cole, G. D.; Andrews, A. M.; Klang, P.; Nobile, M.; Gansch, R.; Ostermaier, C.; Schrenk, W.; Strasser, G.

    2011-01-01

    In this letter we present a quantum well infrared photodetector (QWIP), which is fabricated as a photonic crystal slab (PCS). With the PCS it is possible to enhance the absorption efficiency by increasing photon lifetime in the detector active region. To understand the optical properties of the device we simulate the PCS photonic band structure, which differs significantly from a real two-dimensional photonic crystal. By fabricating a PCS-QWIP with 100x less quantum well doping, compared to a standard QWIP, we are able to see strong absorption enhancement and sharp resonance peaks up to temperatures of 170 K.

  1. Photonic crystal slab quantum cascade detector

    Energy Technology Data Exchange (ETDEWEB)

    Reininger, Peter, E-mail: peter.reininger@tuwien.ac.at; Schwarz, Benedikt; Harrer, Andreas; Zederbauer, Tobias; Detz, Hermann; Maxwell Andrews, Aaron; Gansch, Roman; Schrenk, Werner; Strasser, Gottfried [Institute for Solid State Electronics and Center for Micro- and Nanostructures, Vienna University of Technology, Floragasse 7, Vienna 1040 (Austria)

    2013-12-09

    In this Letter, we demonstrate the design, fabrication, and characterization of a photonic crystal slab quantum cascade detector (PCS-QCD). By employing a specifically designed resonant cavity, the performance of the photodetector is improved in three distinct ways. The PCS makes the QCD sensitive to surface normal incident light. It resonantly enhances the photon lifetime inside the active zone, thus increasing the photocurrent significantly. And, the construction form of the device inherently decreases the noise. Finally, we compare the characteristics of the PCS-QCD to a PCS - quantum well infrared photodetector and outline the advantages for certain fields of applications.

  2. Automated inspection of hot steel slabs

    Science.gov (United States)

    Martin, Ronald J.

    1985-01-01

    The disclosure relates to a real time digital image enhancement system for performing the image enhancement segmentation processing required for a real time automated system for detecting and classifying surface imperfections in hot steel slabs. The system provides for simultaneous execution of edge detection processing and intensity threshold processing in parallel on the same image data produced by a sensor device such as a scanning camera. The results of each process are utilized to validate the results of the other process and a resulting image is generated that contains only corresponding segmentation that is produced by both processes.

  3. Damage Function Rating Procedure for Flat Slab Basement Shelters.

    Science.gov (United States)

    1982-12-01

    with solid heads at the columns . These types of slabs are 33 I r~ Omm- D6U0St - m . -I ig. "-.TyiaaFalSasontucin 34 -4 called ribbed, or " waffle ", slabs ...and for design purposes are considered flat slabs with the solid heads at the columns performing the same function as the drop panels. Waffle flat...she:.ers, an upgrading method must be developed and verified by test for these critical stress areas adjacent to the column supports. Waffle Slabs

  4. CFRP strengthened openings in two-way concrete slabs

    DEFF Research Database (Denmark)

    Enochsson, O.; Lundqvist, J.; Täljsten, Björn

    2006-01-01

    Rehabilitation and strengthening of concrete structures with externally bonded fibre reinforced polymers (FRPs) has been a viable technique for at least a decade. An interesting and useful application is strengthening of slabs or walls where openings are introduced. In these situations, FRP sheets....... In this paper, laboratory tests on I I slabs with openings, loaded with a distributed load are presented together with analytical and numerical evaluations. Six slabs with openings have been strengthened with carbon fibre reinforced polymers (CFRPs) sheets. These slabs are compared with traditionally steel...

  5. Evidence of fire resistance of hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes) are predo......Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes...

  6. A STUDY ON THE WHEELSET/SLAB TRACK VERTICAL INTERACTION

    OpenAIRE

    2012-01-01

    This paper deals with the interaction between a moving wheelset and a slab track due to the short-pitch corrugated rail. The wheelset is modeled using a free-free Timoshenko beam with attached rigid bodies as the axle boxes, wheels and brake discs. The slab track model consists of elastically supported double Euler-Bernoulli beams. In fact, both wheelset and slab track are symmetric structures and the issue of the wheelset/slab track interaction is reduced to the wheel/rail interaction. The n...

  7. Control of exceptional points in photonic crystal slabs

    DEFF Research Database (Denmark)

    Kaminski, Piotr Marek; Taghizadeh, Alireza; Breinbjerg, Olav

    2017-01-01

    Various ways of controlling the extent of the ring of exceptional points in photonic crystal slabs are investigated. The extent of the ring in photonic crystal slabs is found to vary with the thickness of the slab. This enables recovery of Dirac cones in open, non-Hermitian systems......, such as a photonic crystal slab. In this case, all three bands exhibit a bound state in the continuum in close proximity of the Γ point. These results may lead to new designs of small photonic-crystal-based lasers exhibiting high-quality factors....

  8. Development of a Leave-in-Place Slab Edge Insulating Form System

    Energy Technology Data Exchange (ETDEWEB)

    Marc Hoeschele; Eric Lee

    2009-08-31

    Concrete slabs represent the primary foundation type in residential buildings in the fast-growing markets throughout the southern and southwestern United States. Nearly 75% of the 2005 U.S. population growth occurred in these southern tier states. Virtually all of these homes have uninsulated slab perimeters that transfer a small, but steady, flow of heat from conditioned space to outdoors during the heating season. It is estimated that new home foundations constructed each year add 0.016 quads annually to U.S. national energy consumption; we project that roughly one quarter of this amount can be attributed to heat loss through the slab edge and the remaining three quarters to deep ground transfers, depending upon climate. With rising concern over national energy use and the impact of greenhouse gas emissions, it is becoming increasingly imperative that all cost-effective efforts to improve building energy efficiency be implemented. Unlike other building envelope components that have experienced efficiency improvements over the years, slab edge heat loss has largely been overlooked. From our vantage point, a marketable slab edge insulation system would offer significant benefits to homeowners, builders, and the society as a whole. Conventional slab forming involves the process of digging foundation trenches and setting forms prior to the concrete pour. Conventional wood form boards (usually 2 x 10's) are supported by vertical stakes on the outer form board surface, and by supporting 'kickers' driven diagonally from the top of the form board into soil outside the trench. Typically, 2 x 10's can be used only twice before they become waste material, contributing to an additional 400 pounds of construction waste per house. Removal of the form boards and stakes also requires a follow-up trip to the jobsite by the concrete subcontractor and handling (storage/disposal) of the used boards. In the rare cases where the slab is insulated (typically custom

  9. Dielectric materials for electrical engineering

    CERN Document Server

    Martinez-Vega, Juan

    2013-01-01

    Part 1 is particularly concerned with physical properties, electrical ageing and modeling with topics such as the physics of charged dielectric materials, conduction mechanisms, dielectric relaxation, space charge, electric ageing and life end models and dielectric experimental characterization. Part 2 concerns some applications specific to dielectric materials: insulating oils for transformers, electrorheological fluids, electrolytic capacitors, ionic membranes, photovoltaic conversion, dielectric thermal control coatings for geostationary satellites, plastics recycling and piezoelectric poly

  10. Hot plasma dielectric tensor

    NARCIS (Netherlands)

    Westerhof, E.

    1996-01-01

    The hot plasma dielectric tensor is discussed in its various approximations. Collisionless cyclotron resonant damping and ion/electron Bernstein waves are discussed to exemplify the significance of a kinetic description of plasma waves.

  11. Vacancy-induced transmission in three-dimensional photonic crystal slabs.

    Science.gov (United States)

    Keilman, J; Caruso, K; Citrin, D S

    2015-07-01

    The transmission spectra of finite-thickness slabs of three-dimensional (3D) diamond-lattice photonic crystals of air spheres in a dielectric background in which various concentrations of randomly located vacancies are present are studied. We find that resonant modes associated with isolated defects couple to form an extended defect band, leading to a significant increase in transmission for frequencies inside the 3D photonic bandgap. Outside the 3D gap, vacancies induce scattering from evanescent to propagating modes, leading to an increase in transmission near the pseudo-gap edges within the gap. The local defect density of states for several concentrations of vacancies is computed; thus, it is shown that the total number of defect states and the range of supported frequencies increase due to increasing vacancy density.

  12. Temperature dependence of the dielectric constant of acrylic dielectric elastomer

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Junjie; Chen, Hualing; Li, Bo; Chang, Longfei [Xi' an Jiaotong University, State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi' an (China); Xi' an Jiaotong University, School of Mechanical Engineering, Xi' an (China)

    2013-02-15

    The dielectric constant is an essential electrical parameter to the achievable voltage-induced deformation of the dielectric elastomer. This paper primarily focuses on the temperature dependence of the dielectric constant (within the range of 173 K to 373 K) for the most widely used acrylic dielectric elastomer (VHB 4910). First the dielectric constant was investigated experimentally with the broadband dielectric spectrometer (BDS). Results showed that the dielectric constant first increased with temperature up to a peak value and then dropped to a relative small value. Then by analyzing the fitted curves, the Cole-Cole dispersion equation was found better to characterize the rising process before the peak values than the Debye dispersion equation, while the decrease process afterward can be well described by the simple Debye model. Finally, a mathematical model of dielectric constant of VHB 4910 was obtained from the fitted results which can be used to further probe the electromechanical stability of the dielectric elastomers. (orig.)

  13. Radiative transfer model for contaminated rough slabs.

    Science.gov (United States)

    Andrieu, François; Douté, Sylvain; Schmidt, Frédéric; Schmitt, Bernard

    2015-11-01

    We present a semi-analytical model to simulate the bidirectional reflectance distribution function (BRDF) of a rough slab layer containing impurities. This model has been optimized for fast computation in order to analyze massive hyperspectral data by a Bayesian approach. We designed it for planetary surface ice studies but it could be used for other purposes. It estimates the bidirectional reflectance of a rough slab of material containing inclusions, overlaying an optically thick media (semi-infinite media or stratified media, for instance granular material). The inclusions are assumed to be close to spherical and constituted of any type of material other than the ice matrix. It can be any other type of ice, mineral, or even bubbles defined by their optical constants. We assume a low roughness and we consider the geometrical optics conditions. This model is thus applicable for inclusions larger than the considered wavelength. The scattering on the inclusions is assumed to be isotropic. This model has a fast computation implementation and thus is suitable for high-resolution hyperspectral data analysis.

  14. Dielectric spectroscopy in agrophysics

    Science.gov (United States)

    Skierucha, W.; Wilczek, A.; Szypłowska, A.

    2012-04-01

    The paper presents scientific foundation and some examples of agrophysical applications of dielectric spectroscopy techniques. The aim of agrophysics is to apply physical methods and techniques for studies of materials and processes which occur in agriculture. Dielectric spectroscopy, which describes the dielectric properties of a sample as a function of frequency, may be successfully used for examinations of properties of various materials. Possible test materials may include agrophysical objects such as soil, fruit, vegetables, intermediate and final products of the food industry, grain, oils, etc. Dielectric spectroscopy techniques enable non-destructive and non-invasive measurements of the agricultural materials, therefore providing tools for rapid evaluation of their water content and quality. There is a limited number of research in the field of dielectric spectroscopy of agricultural objects, which is caused by the relatively high cost of the respective measurement equipment. With the fast development of modern technology, especially in high frequency applications, dielectric spectroscopy has great potential of expansion in agrophysics, both in cognitive and utilitarian aspects.

  15. Side-coupled slab-symmetric structure for high-gradient acceleration using terahertz power

    Directory of Open Access Journals (Sweden)

    R. B. Yoder

    2005-11-01

    Full Text Available A slab-symmetric dielectric-loaded accelerator structure, consisting of a vacuum gap between dielectric-lined conducting walls, is described. The device is resonantly excited by an external drive laser which is side coupled into the acceleration region; a novel coupling scheme, which consists of an array of narrow, equally spaced slots in the upper structure boundary, is presented and analyzed in detail. This structure partakes of the advantages of earlier slab-symmetric optical acceleration proposals, but will use a terahertz-frequency external radiation source (λ=340   μm, allowing realistic electron beams to be used in a proof-of-principle experiment. Two- and three-dimensional electromagnetic simulations are used to verify the mode patterns and study the effects of the couplers, including time-dependent calculations of the filling of the structure and particle-in-cell computations of the beam wakefields. Details of the resonance are found to be highly sensitive to the coupling slot geometry: the presence of the couplers can lead to frequency detuning, changes in the field breakdown limits and overall Q factor, and distortions of the field pattern. Beam wakefields are enhanced by the presence of the slots, but found to have no significant effect on the beam transport. The resonant accelerating fields, which are nearly constant along the short transverse direction, are found to have between 10 and 15 times the amplitude of the driving radiation, with only a small (<10% admixture of other nonaccelerating modes. Field gradients are computed to be near 100  MV/m when the structure is driven with 100 MW of terahertz laser power. Possible manufacturing methods for a prototype device are discussed.

  16. Analysis and control of the thermal runaway of ceramic slab under microwave heating

    Institute of Scientific and Technical Information of China (English)

    LIU ChangJun; Dongwoo SHEEN

    2008-01-01

    Thermal runaway is a special macroscopic phenomenon of the dielectrics during microwave heating, in which there is a big jump of the steady state temperature while the applied microwave power varies slightly. It hinders the applications of microwave heating technique in industry. A simulation based on the finite differ-ence time domain (FDTD) method to solve Maxwell's equations coupled with the finite difference (FD) method to solve a heat transfer equation (HTE) is presented, and the temperature variation in a ceramic slab during microwave heating is ob-tained. The temperature variation in the ceramic slab during microwave heating is simulated with various ceramic parameters and applied microwave powers so as to analyze the condition under which thermal runaway is introduced. Moreover, a mi-crowave power control method, based on a single temperature threshold and dual applied microwave powers, is presented, which improves microwave heating effi-ciency and controls thermal runaway. The relation between the final applied mi-crowave power and the monitored temperature threshold is presented as well. This method can be applied in many fields related with microwave heating techniques.

  17. Analysis and control of the thermal runaway of ceramic slab under microwave heating

    Institute of Scientific and Technical Information of China (English)

    Dongwoo; SHEEN

    2008-01-01

    Thermal runaway is a special macroscopic phenomenon of the dielectrics during microwave heating,in which there is a big jump of the steady state temperature while the applied microwave power varies slightly.It hinders the applications of microwave heating technique in industry.A simulation based on the finite difference time domain(FDTD) method to solve Maxwell’s equations coupled with the finite difference(FD) method to solve a heat transfer equation(HTE) is presented,and the temperature variation in a ceramic slab during microwave heating is obtained.The temperature variation in the ceramic slab during microwave heating is simulated with various ceramic parameters and applied microwave powers so as to analyze the condition under which thermal runaway is introduced.Moreover,a microwave power control method,based on a single temperature threshold and dual applied microwave powers,is presented,which improves microwave heating efficiency and controls thermal runaway.The relation between the final applied microwave power and the monitored temperature threshold is presented as well.This method can be applied in many fields related with microwave heating techniques.

  18. Settlement of a foundation slab, non-uniform in depth

    Directory of Open Access Journals (Sweden)

    Ter-Martirosyan Zaven

    2017-01-01

    Full Text Available The paper describes the formulation and solution of problems for the quantitative evaluation of settlements and bearing capacity of rectangular and circular foundation slabs constructed on the base with deformation (K, G or E, ν properties of continuously varying heterogeneity in the depth due to the conditions of its formation. It is shown that the inhomogeneity of the deformation properties of the foundation soils over depths has a significant effect on the formation of additional stress and strain states under the influence of a uniformly distributed external load over the area of a rectangle and circle, where, with growth of loading area (A relative settlement (S/√A depends nonlinearly on √A and decreases with growth of √A up to two or more times. As a computational model for the soil base, the paper considers the nonlinear geomechanical Klein model, according to which the stress-strain modulus of soils increases with depth according to the law of a power function of the form: E(z = E1zn, where n≤1. The solution of the SSC problems for an inhomogeneous ground half-space under the influence of a local load was obtained by an analytical method using the Mathcad software complex on the basis of the Boussinesq-Frohlich concentrated force problem. The results of the solution are presented in tables and distribution diagrams σ(zand S(z, as well as S = f2(√A, n.

  19. Shear and anchorage behaviour of fire exposed hollow core slabs

    NARCIS (Netherlands)

    Fellinger, J.H.H.; Stark, J.; Walraven, J.C.

    2005-01-01

    The fire resistance of hollow core slabs is currently assessed considering flexural failure only. However, fire tests showed that shear or anchorage failure can also govern the load bearing behaviour. As the shear and anchorage capacity of these slabs rely on the tensile strength of the concrete, th

  20. How to produce flat slabs: insights from numeric modeling

    Science.gov (United States)

    Constantin Manea, Vlad; Perez-Gussinye, Marta; Manea, Marina

    2010-05-01

    Flat slab subduction occurs at ~10% of the active convergent margins and it is assumed that subduction of oceanic aseismic ridges or seamount chains is the main mechanism to produce very low angle subduction slabs. However, recent numeric and analog modeling showed that ridges alone of moderate dimensions subducted perpendicular to the trench are not sufficient to produce flat-slab geometries. Therefore an alternative mechanism able to produce flat-slabs is required. In this paper we present dynamic numeric modeling results of subduction in the vicinity of thick continental lithosphere, as a craton for example. We tailored our modeling setup for the Chilean margins at ~31° and our models are integrated back in time 30 Myr. Modeling results show that a craton thickness of 200 km or more when approaching the trench is capable of blocking the asthenospheric flow in the mantle wedge and increasing considerably the suction force. We were able to produce a flat slab that fits well the flat slab geometry in Chile (based on seismicity) and stress distribution. We conclude that thick cratons located in the vicinity of subduction zones, are capable to produce very low angle slabs, and probable a combination of buoyant ridge subduction with a neighbor thick craton represent a better mechanism to produce flat slabs.

  1. Shear and Anchorage Behaviour of Fire Exposed Hollow Core Slabs

    NARCIS (Netherlands)

    Fellinger, J.H.H.

    2004-01-01

    Hollow core (HC) slabs are made of precast concrete with pretensioned strands. These slabs are popular as floor structures in offices and housing. At ambient conditions, the load bearing capacity can be dominated by four different failure modes, i.e. flexure, anchorage, shear compression and shear t

  2. Ultimate deformation capacity of reinforced concrete slabs underblast load

    NARCIS (Netherlands)

    Doormaal, J.C.A.M. van; Weerheijm, J.

    1996-01-01

    In this paper a test method to determine the deformation capacity and the resistance-deformation curve of blast-loaded slabs is described. This method was developed at TNO-PML. The method has been used to determine the ultimate deformation capacity of some simply supported reinforced concrete slabs

  3. Shear and Anchorage Behaviour of Fire Exposed Hollow Core Slabs

    NARCIS (Netherlands)

    Fellinger, J.H.H.

    2004-01-01

    Hollow core (HC) slabs are made of precast concrete with pretensioned strands. These slabs are popular as floor structures in offices and housing. At ambient conditions, the load bearing capacity can be dominated by four different failure modes, i.e. flexure, anchorage, shear compression and shear

  4. Shear capacity of slabs under a combination of loads

    NARCIS (Netherlands)

    Lantsoght, E.O.L.; Van der Veen, C.; Walraven, J.C.

    2013-01-01

    Existing solid slab bridges under a combination of wheel loads and distributed traffic loads sometimes do not fulfil the code requirements for shear. However, reinforced concrete slabs loaded close to the support are subjected to shear stresses which might result in a failure mode of combined punchi

  5. Ultimate deformation capacity of reinforced concrete slabs underblast load

    NARCIS (Netherlands)

    Doormaal, J.C.A.M. van; Weerheijm, J.

    1996-01-01

    In this paper a test method to determine the deformation capacity and the resistance-deformation curve of blast-loaded slabs is described. This method was developed at TNO-PML. The method has been used to determine the ultimate deformation capacity of some simply supported reinforced concrete slabs

  6. Shear and Anchorage Behaviour of Fire Exposed Hollow Core Slabs

    NARCIS (Netherlands)

    Fellinger, J.H.H.

    2004-01-01

    Hollow core (HC) slabs are made of precast concrete with pretensioned strands. These slabs are popular as floor structures in offices and housing. At ambient conditions, the load bearing capacity can be dominated by four different failure modes, i.e. flexure, anchorage, shear compression and shear t

  7. On Early Age Crack Formation in FRC Slabs

    DEFF Research Database (Denmark)

    Olesen, John Forbes; Stang, Henrik

    1997-01-01

    The problem of early age crack formation in FRC slabs due to restrained temperature and shrinkage deformations, is given an analytical treatment. A model taking into account the ageing properties of the tensile softening curve and the continued development in the temperature and shrinkage...... deformations after crack initiation, is presented. Based on this model a design strategy for FRC slabs is outlined....

  8. Influence of weak layer heterogeneity and slab properties on slab tensile failure propensity and avalanche release area

    Directory of Open Access Journals (Sweden)

    J. Gaume

    2014-12-01

    Full Text Available Dry-snow slab avalanches are generally caused by a sequence of fracture processes including failure initiation in a weak snow layer underlying a cohesive slab followed by crack propagation within the weak layer (WL and tensile fracture through the slab. During past decades, theoretical and experimental work has gradually improved our knowledge of the fracture process in snow. However, our limited understanding of crack propagation and fracture arrest propensity prevents the evaluation of avalanche release sizes and thus impedes hazard assessment. To address this issue, slab tensile failure propensity is examined using a mechanically-based statistical model of the slab–WL system based on the finite element method. This model accounts for WL heterogeneity, stress redistribution by elasticity of the slab and the slab possible tensile failure. Two types of avalanche release are distinguished in the simulations: (1 full-slope release if the heterogeneity is not sufficient to stop crack propagation and to trigger a tensile failure within the slab, (2 partial-slope release if fracture arrest and slab tensile failure occurs due to the WL heterogeneity. The probability of these two release types is presented as a function of the characteristics of WL heterogeneity and of the slab. One of the main outcomes is that, for realistic values of the parameters, the tensile failure propensity is mainly influenced by slab properties. Hard and thick snow slabs are more prone to wide-scale crack propagation and thus lead to larger avalanches (full-slope release. In this case, the avalanche size is mainly influenced by topographical and morphological features such as rocks, trees, slope curvature and the spatial variability of the snow depth as it is often claimed in the literature.

  9. A single dielectric nanolaser

    Science.gov (United States)

    Huang, Tsung-Yu; Yen, Ta-Jen

    2016-09-01

    To conquer Ohmic losses from metal and enhance pump absorption efficiency of a nanolaser based on surface plasmon polariton, we theoretically calculate the first magnetic and electric scattering coefficient of a dielectric sphere under a plane wave excitation with a dielectric constant of around 12. From this calculation, we could retrieve both negative effective permittivity and permeability of the sphere simultaneously at frequencies around 153 THz in the aids of Lewin's theory and the power distribution clearly demonstrate the expected negative Goos-Hänchen effect, which usually occurred in a negative refractive waveguide, thus creating two energy vortices to trap incident energy and then promoting the pump absorption efficiency. Meanwhile, a magnetic lasing mode at 167.3 THz is demonstrated and reveals a magnetic dipole resonance mode and a circulating energy flow within the dielectric sphere, providing a possible stopped light feedback mechanism to enable the all-dielectric nanolaser. More importantly, the corresponding mode volume is reduced to 0.01λ3 and a gain threshold of 5.1×103 is obtained. To validate our design of all-dielectric nanolaser, we employ finite-difference-time-domain simulation software to examine the behavior of the nanolaser. From simulation, we could obtain a pinned-down population inversion of 0.001 and a lasing peak at around 166.5 THz, which is very consistent with the prediction of Mie theory. Finally, according to Mie theory, we can regard the all-dielectric nanolaser as the excitation of material polariton and thus could make an analogue between lasing modes of the dielectric and metallic nanoparticles.

  10. Electromagnetic Tunneling and Resonances in Pseudochiral Omega Slabs

    Science.gov (United States)

    Razzaz, Faroq; Alkanhal, Majeed A. S.

    2017-01-01

    This paper presents theoretical investigation of the electromagnetic wave tunneling and anomalous transmission around the trapped modes in a pseudochiral omega slab. The dispersion relation, the conditions of the trapped modes, and the evanescent wave coupling and tunneling in two different reciprocal pseudochiral omega slab structures are derived. The Berreman’s matrix method is applied to obtain the transmission coefficients across the pseudochiral omega slab. When the structure is perturbed, a resonance phenomenon is detected around the trapped modes. This resonance results in transmission anomalies (total transmission and total reflection) and dramatic field amplifications around the trapped modes. The number of the discrete trapped modes and then the resonance frequencies are prescribed by the parameters of the pseudochiral omega slab such as the value of the omega parameter and its orientation and the slab thickness. PMID:28165058

  11. Numerical Study of FRP Reinforced Concrete Slabs at Elevated Temperature

    Directory of Open Access Journals (Sweden)

    Masoud Adelzadeh

    2014-02-01

    Full Text Available One-way glass fibre reinforced polymer (GFRP reinforced concrete slabs at elevated temperatures are investigated through numerical modeling. Serviceability and strength requirements of ACI-440.1R are considered for the design of the slabs. Diagrams to determine fire endurance of slabs by employing “strength domain” failure criterion are presented. Comparisons between the existing “temperature domain” method with the more representative “strength domain” method show that the “temperature domain” method is conservative. Additionally, a method to increase the fire endurance of slabs by placing FRP reinforcement in two layers is investigated numerically. The amount of fire endurance gained by placing FRP in two layers increases as the thickness of slab increases.

  12. Punching strength of reinforced concrete flat slabs without shear reinforcement

    Directory of Open Access Journals (Sweden)

    P. V. P. Sacramento

    Full Text Available Punching strength is a critical point in the design of flat slabs and due to the lack of a theoretical method capable of explaining this phenomenon, empirical formulations presented by codes of practice are still the most used method to check the bearing capacity of slab-column connections. This paper discusses relevant aspects of the development of flat slabs, the factors that influence the punching resistance of slabs without shear reinforcement and makes comparisons between the experimental results organized in a database with 74 slabs carefully selected with theoretical results using the recommendations of ACI 318, EUROCODE 2 and NBR 6118 and also through the Critical Shear Crack Theory, presented by Muttoni (2008 and incorporated the new fib Model Code (2010.

  13. Electromagnetic Tunneling and Resonances in Pseudochiral Omega Slabs.

    Science.gov (United States)

    Razzaz, Faroq; Alkanhal, Majeed A S

    2017-02-06

    This paper presents theoretical investigation of the electromagnetic wave tunneling and anomalous transmission around the trapped modes in a pseudochiral omega slab. The dispersion relation, the conditions of the trapped modes, and the evanescent wave coupling and tunneling in two different reciprocal pseudochiral omega slab structures are derived. The Berreman's matrix method is applied to obtain the transmission coefficients across the pseudochiral omega slab. When the structure is perturbed, a resonance phenomenon is detected around the trapped modes. This resonance results in transmission anomalies (total transmission and total reflection) and dramatic field amplifications around the trapped modes. The number of the discrete trapped modes and then the resonance frequencies are prescribed by the parameters of the pseudochiral omega slab such as the value of the omega parameter and its orientation and the slab thickness.

  14. Drug release from slabs and the effects of surface roughness.

    Science.gov (United States)

    Kalosakas, George; Martini, Dimitra

    2015-12-30

    We discuss diffusion-controlled drug release from slabs or thin films. Analytical and numerical results are presented for slabs with flat surfaces, having a uniform thickness. Then, considering slabs with rough surfaces, the influence of a non-uniform slab thickness on release kinetics is numerically investigated. The numerical release profiles are obtained using Monte Carlo simulations. Release kinetics is quantified through the stretched exponential (or Weibull) function and the resulting dependence of the two parameters of this function on the thickness of the slab, for flat surfaces, and the amplitude of surface fluctuations (or the degree of thickness variability) in case of roughness. We find that a higher surface roughness leads to a faster drug release. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Characterizing wet slab and glide slab avalanche occurrence along the Going-to-the-Sun Road, Glacier National Park, Montana, USA

    Science.gov (United States)

    Peitzsch, Erich H.; Hendrikx, Jordy; Fagre, Daniel B.; Reardon, Blase

    2010-01-01

    Wet slab and glide slab snow avalanches are dangerous and yet can be particularly difficult to predict. Both wet slab and glide slab avalanches are thought to depend upon free water moving through the snowpack but are driven by different processes. In Glacier National Park, Montana, both types of avalanches can occur in the same year and affect the Going-to-the-Sun Road (GTSR). Both wet slab and glide slab avalanches along the GTSR from 2003-2010 are investigated. Meteorological data from two high-elevation weather stations and one SNOTEL site are used in conjunction with an avalanche database and snowpit profiles. These data were used to characterize years when only glide slab avalanches occurred and those years when both glide slab and wet slab avalanches occurred. Results of 168 glide slab and 57 wet slab avalanches along the GTSR suggest both types of avalanche occurrence depend on sustained warming periods with intense solar radiation (or rain on snow) to produce free water in the snowpack. Differences in temperature and net radiation metrics between wet slab and glide slab avalanches emerge as one moves from one day to seven days prior to avalanche occurrence. On average, a more rapid warming precedes wet slab avalanche occurrence. Glide slab and wet slab avalanches require a similar amount of net radiation. Wet slab avalanches do not occur every year, while glide slab avalanches occur annually. These results aim to enhance understanding of the required meteorological conditions for wet slab and glide slab avalanches and aid in improved wet snow avalanche forecasting.

  16. Design and Analysis of Bifurcated Twin Dielectric Slab Loaded Rectangular Waveguide. Dual Frequency Array Elements

    Science.gov (United States)

    1977-03-01

    K V 3 lobe free scan volume in the high frequency band. At scan conditions for which high frequency grating lobes are entering or present, the...immediately obvious from the figures is that the triangular grid provides a grating lobe free scan region for all directions in the plane at high frequency. One

  17. Experimental study on the dielectric properties of polyacrylate dielectric elastomer

    Science.gov (United States)

    Qiang, Junhua; Chen, Hualing; Li, Bo

    2012-02-01

    The dielectric constant of elastomeric dielectric material is an essential physical parameter, whose value may affect the electromechanical deformation of a dielectric elastomer actuator. Since the dielectric constant is influenced by several external factors as reported before, and no certain value has been confirmed to our knowledge, in the present paper, on the basis of systematical comparison of recent past literature, we conducted extensive works on the measurement of dielectric properties of VHB films, involving five influencing factors: prestretch (both equal and unequal biaxial), electrical frequency, electrode material, stress relaxation time and temperature. Experimental results directly show that the dielectric response changes according to these factors, based on which we investigate the significance of each factor, especially the interaction of two external conditions on the dielectric constant of deformable dielectric, by presenting a physical picture of the mechanism of polarization.

  18. Software sensor for slab reheating furnace

    Institute of Scientific and Technical Information of China (English)

    Zhihua Xiong; Guohong Huang; Huihe Shao

    2005-01-01

    It has long been thought that a reheating furnace, with its inherent measurement difficulties and complex dynamics, posed almost insurmountable problems to engineers in steel plants. A novel software sensor is proposed to make more effective use of those measurements that are already available, which has great importance both to slab quality and energy saving. The proposed method is based on the mixtures of Gaussian processes (GP) with the expectation maximization (EM) algorithm employed for parameter estimation of the mixture of models. The mixture model can alleviate the computational complexity of GP and also accords with the changes of operating condition in practical processes. It is demonstrated by on-line estimation of the furnace gas temperature in 1580 reheating furnace in Baosteel Corporation (Group).

  19. Laser applications in machining slab materials

    Science.gov (United States)

    Zhang, Xiaoping

    1990-10-01

    Since the invention of the laser back in 1960, laser technology has been extensively applied in many fields of science and technology. These has been a history of nearly two decades of using lasers as an energy source in machining materials, such as cutting, welding, ruling and boring, among other operations. With the development of flexible automation in production, the advantages of laser machining have has grown more and more obvious. The combination of laser technology and computer science further promotes the enhancement and upgrading of laser machining and related equipment. At present, many countries are building high quality laser equipment for machining slab materials, such as the Coherent and Spectra Physics corporations in the United States, the Trumpf Corporation in West Germany, the Amada Corporation in Japan, and the Bystronic Corporation in Switzerland, among other companies.

  20. Oxide-cladding aluminum nitride photonic crystal slab: Design and investigation of material dispersion and fabrication induced disorder

    Energy Technology Data Exchange (ETDEWEB)

    Melo, E. G., E-mail: emerdemelo@usp.br; Alvarado, M. A.; Carreño, M. N. P.; Alayo, M. I. [Electronic Systems Engineering Department, University of São Paulo, CEP 05508-010 São Paulo, SP (Brazil); Carvalho, D. O. [UNESP - São Paulo State University, CEP 13874-149 São João da Boa Vista, SP (Brazil); Ferlauto, A. S. [Department of Physics, Federal University of Minas Gerais, CEP 31270-901 Belo Horizonte, MG (Brazil)

    2016-01-14

    Photonic crystal slabs with a lower-index material surrounding the core layer are an attractive choice to circumvent the drawbacks in the fabrication of membranes suspended in air. In this work we propose a photonic crystal (PhC) slab structure composed of a triangular pattern of air holes in a multilayer thin film of aluminum nitride embedded in silicon dioxide layers designed for operating around 450 nm wavelengths. We show the design of an ideal structure and analyze the effects of material dispersion based on a first-order correction perturbation theory approach using dielectric functions obtained by experimental measurements of the thin film materials. Numerical methods were used to investigate the effects of fabrication induced disorder of typical nanofabrication processes on the bandgap size and spectral response of the proposed device. Deviation in holes radii and positions were introduced in the proposed PhC slab model with a Gaussian distribution profile. Impacts of slope in holes sidewalls that might result from the dry etching of AlN were also evaluated. The results show that for operation at the midgap frequency, slope in holes sidewalls is more critical than displacements in holes sizes and positions.

  1. Occurrences of thermophilic Campylobacter in pigs slaughtered at Morogoro slaughter slabs, Tanzania.

    Science.gov (United States)

    Mdegela, Robinson H; Laurence, Kibona; Jacob, Petro; Nonga, Hezron Emmanuel

    2011-01-01

    Occurrences of thermophlic Campylobacter in pigs and pig carcasses was investigated in a cross-sectional study that was carried out in three selected slaughter slabs in Morogoro municipality, Tanzania. Before sampling, the slab hygiene, slaughter, carcass dressing, and meat handling was assessed. Fecal samples were collected from 66 slaughter pigs at the kill floor. After slaughter, a 100-cm(2) area on medial surface of the thigh muscles of dressed carcasses was sampled using sterile cotton swabs. Thereafter, the jejunal, cecal, and colon contents were also sampled. The samples were subjected to standard bacteriological examination using Skirrows protocol. In all slaughter slabs visited, it was found that pig slaughter, dressing, and meat handling was done on the ground under unhygienic condition. All the slaughter slab environment were dirty and had neither tap water or drainage systems. Thermophilic Campylobacter prevalence in slaughtered pig was 66.7% while contamination rate of dressed carcasses was 10.6%. Of the Campylobacter-positive carcasses, five (12.2%) were from the animals which were also positive to Campylobacter. The isolation rate of Campylobacter in the cecum was higher (34.8%) compared to the small intestines (28.8%) and colon (16.7%) although the difference was not statistically significant (P > 0.05). Campylobacter jejuni was the most prevalent species as it constituted 74% of all isolates, while Campylobacter coli was isolated at 26%. This suggests possible risks of infection to people through consumption of contaminated pork or through contact with infected pigs. Cecum was found to be the major part of intestine highly colonized by Campylobacter.

  2. Thickness and dielectric constant determination of thin dielectric layers

    NARCIS (Netherlands)

    Bruijn, de Helene E.; Minor, Marcel; Kooyman, Rob P.H.; Greve, Jan

    1993-01-01

    We derive a method for the determination of the dielectric constant and thickness of a thin dielectric layer, deposited on top of a thick dielectric layer which is in turn present on a metal film. Reflection of p- and s-polarized light from the metal layer yields minima for certain angles of inciden

  3. Controlling birefringence in dielectrics

    Science.gov (United States)

    Danner, Aaron J.; Tyc, Tomáš; Leonhardt, Ulf

    2011-06-01

    Birefringence, from the very essence of the word itself, refers to the splitting of light rays into two parts. In natural birefringent materials, this splitting is a beautiful phenomenon, resulting in the perception of a double image. In optical metamaterials, birefringence is often an unwanted side effect of forcing a device designed through transformation optics to operate in dielectrics. One polarization is usually implemented in dielectrics, and the other is sacrificed. Here we show, with techniques beyond transformation optics, that this need not be the case, that both polarizations can be controlled to perform useful tasks in dielectrics, and that rays, at all incident angles, can even follow different trajectories through a device and emerge together as if the birefringence did not exist at all. A number of examples are shown, including a combination Maxwell fisheye/Luneburg lens that performs a useful task and is achievable with current fabrication materials.

  4. Dielectric assist accelerating structure

    Science.gov (United States)

    Satoh, D.; Yoshida, M.; Hayashizaki, N.

    2016-01-01

    A higher-order TM02 n mode accelerating structure is proposed based on a novel concept of dielectric loaded rf cavities. This accelerating structure consists of ultralow-loss dielectric cylinders and disks with irises which are periodically arranged in a metallic enclosure. Unlike conventional dielectric loaded accelerating structures, most of the rf power is stored in the vacuum space near the beam axis, leading to a significant reduction of the wall loss, much lower than that of conventional normal-conducting linac structures. This allows us to realize an extremely high quality factor and a very high shunt impedance at room temperature. A simulation of a 5 cell prototype design with an existing alumina ceramic indicates an unloaded quality factor of the accelerating mode over 120 000 and a shunt impedance exceeding 650 M Ω /m at room temperature.

  5. Dielectrically Loaded Biconical Antennas

    Science.gov (United States)

    Nusseibeh, Fouad Ahmed

    1995-01-01

    Biconical antennas are of great interest to those who deal with broadband applications including the transmission/reception of pulses. In particular, wide-angle conical antennas are an attractive choice in many applications including Electronic Support Measures (ESM) and the measurements of transient surface currents and charge densities on aircraft. Dielectric loading in the interior region of a conical antenna can be used to reduce the size of the antenna especially at low frequencies and/or for structural strength. Therefore, having an analytical solution for the input impedance and the frequency response is very helpful in optimizing the design and understanding the behavior of the antenna. From the quasi-analytical solution for the input impedance and the electric field of a wide-angle conical antenna, it can be seen that the dielectric loading in the antenna region improves the input impedance at low frequencies, but increases the number of resonance points and the magnitude of these peaks. When an inhomogeneous dielectric load is used, the magnitude of the resonance peaks is decreased (depending on the way the load is distributed), improving the input impedance of the antenna significantly. Introducing a dielectric load in the interior region of an electrically short receiving cone makes the antenna behave as an electrically longer antenna. However, this is not true for the case for electrical1y long antennas. For the case of pulse transmission, the dielectric load affects only the amplitude. Of course, if the dielectric fills the whole space, both transmitting and receiving antennas behave as electrically longer antennas.

  6. Absorption in dielectric models

    CERN Document Server

    Churchill, R J

    2015-01-01

    We develop a classical microscopic model of a dielectric. The model features nonlinear interaction terms between polarizable dipoles and lattice vibrations. The lattice vibrations are found to act as a pseudo-reservoir, giving broadband absorption of electromagnetic radiation without the addition of damping terms in the dynamics. The effective permittivity is calculated using a perturbative iteration method and is found to have the form associated with real dielectrics. Spatial dispersion is naturally included in the model and we also calculate the wavevector dependence of the permittivity.

  7. Optics of dielectric microstructures

    DEFF Research Database (Denmark)

    Søndergaard, Thomas

    2002-01-01

    microstructures, will be presented in the part I of this thesis consisting of the chapters 2-5. An introductions is given in chapter 2. In part I three methods are presented for calculating spontaneous and classical emission from sources in dielectric microstructures. The first method presented in chapter 3...... near fields and far fields generated by a dipole emitter in finite-sized dielectric disks. A collection of results obtained within the second topic, planar photonic crystal waveguides, are presented in part II of this thesis consisting of the chapters 6-10. Chapter 6 contains a further introduction...

  8. Thermally switchable dielectrics

    Science.gov (United States)

    Dirk, Shawn M.; Johnson, Ross S.

    2013-04-30

    Precursor polymers to conjugated polymers, such as poly(phenylene vinylene), poly(poly(thiophene vinylene), poly(aniline vinylene), and poly(pyrrole vinylene), can be used as thermally switchable capacitor dielectrics that fail at a specific temperature due to the non-conjugated precursor polymer irreversibly switching from an insulator to the conjugated polymer, which serves as a bleed resistor. The precursor polymer is a good dielectric until it reaches a specific temperature determined by the stability of the leaving groups. Conjugation of the polymer backbone at high temperature effectively disables the capacitor, providing a `built-in` safety mechanism for electronic devices.

  9. Behavior of FRP Link Slabs in Jointless Bridge Decks

    Directory of Open Access Journals (Sweden)

    Aziz Saber

    2012-01-01

    Full Text Available The paper investigated the use of fiberglass-reinforced plastic (FRP grid for reinforcement in link slabs for jointless bridge decks. The design concept of link slab was examined based on the ductility of the fiberglass-reinforced plastic grid to accommodate bridge deck deformations. The implementation of hybrid simulation assisted in combining the experimental results and the theoretical work. The numerical analyses and the experimental work investigated the behavior of the link slab and confirmed its feasibility. The results indicated that the technique would allow simultaneous achievement of structural need, lower flexural stiffness of the link slab approaching the behavior of a hinge, and sustainability need of the link slab. The outcome of the study supports the contention that jointless concrete bridge decks may be designed and constructed with fiberglass-reinforced plastic grid link slabs. This concept would also provide a solution to a number of deterioration problems associated with bridge deck joints and can be used during new construction of bridge decks. The federal highway administration provided funds to Louisiana Department of Transportation through the innovative bridge research and development program to implement the use of FRP grid as link slab.

  10. Power dissipation and temperature distribution in piezoelectric ceramic slabs.

    Science.gov (United States)

    Thomas, D; Ebenezer, D D; Srinivasan, Sivakumar M

    2010-10-01

    A method is presented to determine power dissipation in one-dimensional piezoelectric slabs with internal losses and the resulting temperature distribution. The length of the slab is much greater than the lateral dimensions. Losses are represented using complex piezoelectric coefficients. It is shown that the spatially non-uniform power dissipation density in the slab can be determined by considering either hysteresis loops or the Poynting vector. The total power dissipated in the slab is obtained by integrating the power dissipation density over the slab and is shown to be equal to the power input to the slab for special cases of mechanically and electrically excited slabs. The one-dimensional heat equation that includes the effect of conduction and convection, and the boundary conditions, are then used to determine the temperature distribution. When the analytical expression for the power dissipation density is simple, direct integration is used. It is shown that a modified Fourier series approach yields the same results. For other cases, the temperature distribution is determined using only the latter approach. Numerical results are presented to illustrate the effects of internal losses, heat conduction and convection coefficients, and boundary conditions on the temperature distribution.

  11. Impact Resistance Behaviour of Banana Fiber Reinforced Slabs

    Science.gov (United States)

    Che Muda, Zakaria; Syamsir, Agusril; Nasharuddin Mustapha, Kamal; Rifdy Samsudin, Muhamad; Thiruchelvam, Sivadass; Usman, Fathoni; Beddu, Salmia; Liyana Mohd Kamal, Nur; Ashraful Alam, Md; Birima, Ahmed H.; Zaroog, O. S.

    2016-03-01

    This paper investigate the performance of banana fibre reinforced slabs 300mm × 300mm size with varied thickness subjected to low impact projectile test. A self-fabricated drop-weight impact test rig with a steel ball weight of 1.25 kg drop at 1 m height has been used in this research work. The main variables for the study is to find the relationship of the impact resistance against the BF contents and slab thickness. A linear relationship has been established between first and ultimate crack resistance against BF contents and slab thickness by the experiment. The linear relationship has also been established between the service (first) crack and ultimate crack resistance against the BF contents for a constant spacing for various banana fibre reinforced slab thickness. The increment in BF content has more effect on the first crack resistance than the ultimate crack resistance. The linear relationship has also been established between the service (first) crack and ultimate crack resistance against the various slab thickness. Overall 1.5% BF content with slab thickness of 40 mm exhibit better first and ultimate crack resistance up to 16 times and up to 17 times respectively against control slab (without BF)

  12. Exact exchange plane-wave-pseudopotential calculations for slabs.

    Science.gov (United States)

    Engel, Eberhard

    2014-05-14

    The exact exchange of density functional theory is applied to both free-standing graphene and a Si(111) slab, using the plane-wave pseudopotential (PWPP) approach and a periodic repetition of the supercell containing the slab. It is shown that (i) PWPP calculations with exact exchange for slabs in supercell geometry are basically feasible, (ii) the width of the vacuum required for a decoupling of the slabs is only moderately larger than in the case of the local-density approximation, and (iii) the resulting exchange potential vx shows an extended region, both far outside the surface of the slab and far from the middle of the vacuum region between the slabs, in which vx behaves as -e(2)/z, provided the width of the vacuum is chosen sufficiently large. This last result is corroborated by an analytical analysis of periodically repeated jellium slabs. The intermediate -e(2)/z behavior of vx can be used for an absolute normalization of vx and the total Kohn-Sham potential, which, in turn, allows the determination of the work function.

  13. Comparison between Ribbed Slab Structure using Lightweight Foam Concrete and Solid Slab Structure using Normal Concrete

    Directory of Open Access Journals (Sweden)

    Mohd Zailan Sulieman

    2010-03-01

    Full Text Available

    The aim of this study is to demonstrate that one-way ribbed slab with lightweight foam concrete can be used to reduce the dead load on slab concrete structure. This would allow the structural designer to reduce the size of column, footing and other load

  14. Performance and damages of R.C. slabs in fire

    DEFF Research Database (Denmark)

    Giuliani, Luisa; Gentili, Filippo

    2015-01-01

    slabs with complex geometry exposed to fire and assessing the entity of the damage on the basis of the decrement of the load bearing capacity at the end of the fire. By considering this quantity for different time of exposure to a standard fire, a curve is obtained that provides important information...... on the vulnerability of the slab to the fire action and can be used for optimizing the design on the basis of the required class of resistance or for choosing between different slab alternatives....

  15. Interaction of an ion bunch with a plasma slab

    Energy Technology Data Exchange (ETDEWEB)

    Krasovitskiy, V. B., E-mail: krasovit@mail.ru [Russian Academy of Sciences, Keldysh Institute of Applied Mathematics (Russian Federation); Turikov, V. A. [Peoples’ Friendship University of Russia (Russian Federation)

    2016-11-15

    Charge neutralization of a short ion bunch passing through a plasma slab is studied by means of numerical simulation. It is shown that a fraction of plasma electrons are trapped by the bunch under the action of the collective charge separation field. The accelerated electrons generated in this process excite beam−plasma instability, thereby violating the trapping conditions. The process of electron trapping is also strongly affected by the high-frequency electric field caused by plasma oscillations at the slab boundaries. It is examined how the degree of charge neutralization depends on the parameters of the bunch and plasma slab.

  16. Light-assisted templated self assembly using photonic crystal slabs.

    Science.gov (United States)

    Mejia, Camilo A; Dutt, Avik; Povinelli, Michelle L

    2011-06-06

    We explore a technique which we term light-assisted templated self-assembly. We calculate the optical forces on colloidal particles over a photonic crystal slab. We show that exciting a guided resonance mode of the slab yields a resonantly-enhanced, attractive optical force. We calculate the lateral optical forces above the slab and predict that stably trapped periodic patterns of particles are dependent on wavelength and polarization. Tuning the wavelength or polarization of the light source may thus allow the formation and reconfiguration of patterns. We expect that this technique may be used to design all-optically reconfigurable photonic devices.

  17. TE Magnetostatic Surface Waves in Symmetric Dielectric Negative Permittivity Material Waveguide

    Directory of Open Access Journals (Sweden)

    A. I. Ass'ad

    2009-01-01

    Full Text Available Nonlinear magnetostatic surface wave in a slab waveguide structure has been investigated. The design consisted of dielectric film between two thick nonlinear nonmagnetic negative permittivity material (NPM layers. A dispersion relation for TE nonlinear Magnetostatic surface waves (NMSSWs has been derived into the proposed structure and has been numerically investigated. Effective refractive index decreases with thickness and frequency increase have been found. Effective refractive index decrease with optical nonlinearity increase and switching to negative values of effective refractive index at a certain value of optical nonlinearity have been found. This meant that the structure behaved like a left-handed material over certain range. We found that the power flow was changing by changing the operating frequency, the dielectric film thickness, and the optical nonlinearity. Also, the effective refractive index and power flow attained constant values over certain values of dielectric constant values.

  18. Effective permittivity and permeability of one-dimensional dielectric photonic crystal within a band gap

    Institute of Scientific and Technical Information of China (English)

    Guo Ji-Yong; Chen Hong; Li Hong-Qiang; Zhang Ye-Wen

    2008-01-01

    We take a finite dielectric photonic crystal as a homogeneous slab and have extracted the effective parameters. Our systematic study shows that the effective permittivity or permeability of dielectric photonic crystal is negative within a band gap region. This means that the band gap might act as ε-negative materials (ENMs) with ε0, or μ-negative materials (MNMs) with ε>0 and μ<0. Moreover the effective parameters sensitively rely on size, surface termination, symmetry, etc. The effective parameters can be used to design full transmission tunnelling modes and amplify evanescent wave. Several cases are studied and the results show that dielectric photonic band gap can indeed mimic a single negative material (ENM or MNM) under some restrictions.

  19. Direct measurement of the effective infrared dielectric response of a highly doped semiconductor metamaterial

    Science.gov (United States)

    Mohtar, Abeer Al; Kazan, Michel; Taliercio, Thierry; Cerutti, Laurent; Blaize, Sylvain; Bruyant, Aurélien

    2017-03-01

    We have investigated the effective dielectric response of a subwavelength grating made of highly doped semiconductors (HDS) excited in reflection, using numerical simulations and spectroscopic measurement. The studied system can exhibit strong localized surface resonances and has, therefore, a great potential for surface-enhanced infrared absorption (SEIRA) spectroscopy application. It consists of a highly doped InAsSb grating deposited on lattice-matched GaSb. The numerical analysis demonstrated that the resonance frequencies can be inferred from the dielectric function of an equivalent homogeneous slab by accounting for the complex reflectivity of the composite layer. Fourier transform infrared reflectivity (FTIR) measurements, analyzed with the Kramers–Kronig conversion technique, were used to deduce the effective response in reflection of the investigated system. From the knowledge of this phenomenological dielectric function, transversal and longitudinal energy-loss functions were extracted and attributed to transverse and longitudinal resonance modes frequencies.

  20. Microstructural and dielectric susceptibility effects on predictions of dielectric properties

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, K.F.; Exarhos, G.J. [Pacific Northwest National Lab., Richland, WA (United States); Risser, S.M. [Texas A& M Univ., Commerce, TX (United States)

    1997-12-01

    In modeling the dielectric properties of inhomogeneous materials, the treatment of the electric field interactions differentiate the usual modeling formalisms (such as the Maxwell-Garnett and Bruggeman effective medium methods) and their accuracy. In this paper, we show that the performance of effective medium methods is dependent upon a number of variables - defect concentration, alignment, and the dielectric constant of the material itself. Using our previously developed finite element model of an inhomogeneous dielectric, we have developed models for a number of dielectric films of varying dielectric constant and microstructures. Alignment of defects parallel to the applied field and the larger defect aspect ratios increase the overall dielectric constant. The extent of these effects is dependent on the dielectric constant of the bulk component.

  1. Dielectric Waveguide lasers

    NARCIS (Netherlands)

    Pollnau, Markus; Orlovic, V.A.; Pachenko, V.; Scherbakov, I.A.

    2007-01-01

    Our recent results on planar and channel waveguide fabrication and lasers in the dielectric oxide materials Ti:sapphire and rare-earth-ion-doped potassium yttrium double tungstate (KYW) are reviewed. We have employed waveguide fabrication methods such as liquid phase epitaxy and reactive ion etching

  2. Interfaces: nanometric dielectrics

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, T J [School of Informatics, University of Wales Bangor, Dean Street, Bangor, Gwynedd, LL70 9PX (United Kingdom)

    2005-01-21

    The incorporation of nanometric size particles in a matrix to form dielectric composites shows promise of materials (nanodielectrics) with new and improved properties. It is argued that the properties of the interfaces between the particles and the matrix, which will themselves be of nanometric dimensions, will have an increasingly dominant role in determining dielectric performance as the particle size decreases. The forces that determine the electrical and dielectric properties of interfaces are considered, with emphasis on the way in which they might influence composite behaviour. A number of examples are given in which interfaces at the nanometric level exercise both passive and active control over dielectric, optical and conductive properties. Electromechanical properties are also considered, and it is shown that interfaces have important electrostrictive and piezoelectric characteristics. It is demonstrated that the process of poling, namely subjecting macroscopic composite materials to electrical stress and raised temperatures to create piezoelectric materials, can be explained in terms of optimizing the collective response of the nanometric interfaces involved. If the electrical and electromechanical features are coupled to the long-established electrochemical properties, interfaces represent highly versatile active elements with considerable potential in nanotechnology.

  3. Interfaces: nanometric dielectrics

    Science.gov (United States)

    Lewis, T. J.

    2005-01-01

    The incorporation of nanometric size particles in a matrix to form dielectric composites shows promise of materials (nanodielectrics) with new and improved properties. It is argued that the properties of the interfaces between the particles and the matrix, which will themselves be of nanometric dimensions, will have an increasingly dominant role in determining dielectric performance as the particle size decreases. The forces that determine the electrical and dielectric properties of interfaces are considered, with emphasis on the way in which they might influence composite behaviour. A number of examples are given in which interfaces at the nanometric level exercise both passive and active control over dielectric, optical and conductive properties. Electromechanical properties are also considered, and it is shown that interfaces have important electrostrictive and piezoelectric characteristics. It is demonstrated that the process of poling, namely subjecting macroscopic composite materials to electrical stress and raised temperatures to create piezoelectric materials, can be explained in terms of optimizing the collective response of the nanometric interfaces involved. If the electrical and electromechanical features are coupled to the long-established electrochemical properties, interfaces represent highly versatile active elements with considerable potential in nanotechnology.

  4. Dielectric elastomer memory

    Science.gov (United States)

    O'Brien, Benjamin M.; McKay, Thomas G.; Xie, Sheng Q.; Calius, Emilio P.; Anderson, Iain A.

    2011-04-01

    Life shows us that the distribution of intelligence throughout flexible muscular networks is a highly successful solution to a wide range of challenges, for example: human hearts, octopi, or even starfish. Recreating this success in engineered systems requires soft actuator technologies with embedded sensing and intelligence. Dielectric Elastomer Actuator(s) (DEA) are promising due to their large stresses and strains, as well as quiet flexible multimodal operation. Recently dielectric elastomer devices were presented with built in sensor, driver, and logic capability enabled by a new concept called the Dielectric Elastomer Switch(es) (DES). DES use electrode piezoresistivity to control the charge on DEA and enable the distribution of intelligence throughout a DEA device. In this paper we advance the capabilities of DES further to form volatile memory elements. A set reset flip-flop with inverted reset line was developed based on DES and DEA. With a 3200V supply the flip-flop behaved appropriately and demonstrated the creation of dielectric elastomer memory capable of changing state in response to 1 second long set and reset pulses. This memory opens up applications such as oscillator, de-bounce, timing, and sequential logic circuits; all of which could be distributed throughout biomimetic actuator arrays. Future work will include miniaturisation to improve response speed, implementation into more complex circuits, and investigation of longer lasting and more sensitive switching materials.

  5. Electron dynamics and plasma jet formation in a helium atmospheric pressure dielectric barrier discharge jet

    Energy Technology Data Exchange (ETDEWEB)

    Algwari, Q. Th. [Centre for Plasma Physics, School of Maths and Physics, Queen' s University Belfast, University Road, Belfast, Northern Ireland BT7 1NN (United Kingdom); Electronic Department, College of Electronics Engineering, Mosul University, Mosul 41002 (Iraq); O' Connell, D. [Centre for Plasma Physics, School of Maths and Physics, Queen' s University Belfast, University Road, Belfast, Northern Ireland BT7 1NN (United Kingdom); York Plasma Institute, Department of Physics, University of York, York YO10 5DD (United Kingdom)

    2011-09-19

    The excitation dynamics within the main plasma production region and the plasma jets of a kHz atmospheric pressure dielectric barrier discharge (DBD) jet operated in helium was investigated. Within the dielectric tube, the plasma ignites as a streamer-type discharge. Plasma jets are emitted from both the powered and grounded electrode end; their dynamics are compared and contrasted. Ignition of these jets are quite different; the jet emitted from the powered electrode is ignited with a slight time delay to plasma ignition inside the dielectric tube, while breakdown of the jet at the grounded electrode end is from charging of the dielectric and is therefore dependent on plasma production and transport within the dielectric tube. Present streamer theories can explain these dynamics.

  6. Extremely Thin Dielectric Metasurface for Carpet Cloaking

    CERN Document Server

    Hsu, LiYi; Kanté, Boubacar

    2015-01-01

    We demonstrate a novel and simple approach to cloaking a scatterer on a ground plane. We use an extremely thin dielectric metasurface ({\\lambda}/12) to reshape the wavefronts distorted by a scatterer in order to mimic the reflection pattern of a flat ground plane. To achieve such carpet cloaking, the reflection angle has to be equal to the incident angle everywhere on the scatterer. We use a graded metasurface and calculate the required phase gradient to achieve cloaking. Our metasurface locally provides additional phase to the wavefronts to compensate for the phase difference amongst light paths induced by the geometrical distortion. We design our metasurface in the microwave range using highly sub-wavelength dielectric resonators. We verify our design by full-wave time-domain simulations using micro-structured resonators and show that results match theory very well. This approach can be applied to hide any scatterer on a ground plane not only at microwave frequencies, but also at higher frequencies up to th...

  7. Numerical Calculation of Concrete Slab Response to Blast Loading

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xiaoqing; HAO Hong; KUZNETSOV Valerian A; WASCHL John

    2006-01-01

    In the present paper,a dynamic plastic damage model for concrete has been employed to estimate responses of a reinforced concrete slab subjected to blast loading.The interaction between the blast wave and the concrete slab is considered in 3D simulation.In the first stage,the initial detonation and blast wave propagation is modelled in 2D simulation before the blast wave reaches the concrete slab,then the results obtained from 2D calculation are remapped to a 3D model.The calculated blast load is compared with that obtained from TM5-1300.Numerical results of the concrete slab response are compared with the explosive test carried out in the Weapons System Division,Defence Science and Technology Organisation,Department of Defence,Australia.

  8. Active split-ring metamaterial slabs for magnetic resonance imaging

    CERN Document Server

    Lopez, Marcos A; Freire, Manuel J; Behr, Volker C; Jakob, Peter M; Marques, Ricardo

    2011-01-01

    In this work, it is analyzed the ability of split-ring metamaterial slabs with zero/high permeability to reject/confine the radiofrequency magnetic field in magnetic resonance imaging systems. Using an homogenization procedure, split-ring slabs have been designed and fabricated to work in a 1.5T system. Active elements consisting of pairs of crossed diodes are inserted in the split-rings. With these elements, the permeability of the slabs can be automatically switched between a unity value when interacting with the strong excitation field of the transmitting body coil, and zero or high values when interacting with the weak field produced by protons in tissue. Experiments are shown for different configurations where these slabs can help to locally increase the signal-to-noise-ratio.

  9. Formation mechanism of internal cracks in continuously cast slab

    Institute of Scientific and Technical Information of China (English)

    Guosen Zhu; Xinhua Wang; Huixiang Yu; Jiongming Zhang; Wanjun Wang

    2004-01-01

    In order to make clear the formation mechanism of centerline cracks in continuously cast slabs, the form, distribution and other characteristics of the cracks were analyzed. The final solidification point, surface temperature of the slabs and strain in solidifying shell were investigated. The results were that: (1) Five relatively low temperature zones exist on slab surface below the three water spraying nozzles and near the two edges, respectively, which corresponds to the places of centerline cracks and triangle-zone cracks. (2) Centerline cracks and triangle-zone cracks occur because of weak secondary cooling, uneven cooling along slab width,and large variation of roll gap. (3) After minimizing the variation of roll gap and applying the new secondary cooling pattern, the occurring frequency of centerline and triangle-zone cracks minimizes to zero.

  10. Waveform effects of a metastable olivine tongue in subducting slabs

    Science.gov (United States)

    Vidale, John E.; Williams, Quentin; Houston, Heidi

    1991-01-01

    Velocity models of subducting slabs with a kinetically-depressed olivine to beta- and gamma-spinel transition are constructed, and the effect that such structures would have on teleseismic P waveforms are examined using a full-wave finite-difference method. These 2D calculations yielded waveforms at a range of distances in the downdip direction. The slab models included a wedge-shaped, low-velocity metastable olivine tongue (MOTO) to a depth of 670 km, as well as a plausible thermal anomaly; one model further included a 10-km-thick fast layer on the surface of the slab. The principal effect of MOTO is to produce grazing reflections at wide angles off the phase boundary, generating a secondary arrival 0 to 4 seconds after the initial arrival depending on the take-off angle. The amplitude and timing of this feature vary with the lateral location of the seismic source within the slab cross-section.

  11. Innovation on RC Waffle and Ribbed Slab Analysis Models

    Directory of Open Access Journals (Sweden)

    P. Hájek

    2000-01-01

    Full Text Available Waffle and ribbed reinforced concrete slabs are widely used in building constructions in view of the flexibility design and structural efficiency. The wide range of reinforced concrete and composite waffle and ribbed slabs has been theoretically analysed and tested from the point of view of structural behaviour within the research performed in the last years. The results of the experimental investigation, supported by theoretical conclusions, have confirmed significantly better structural properties of the composite waffle slabs (composed from RC and ceramic fillers than the assumptions usually considered in common analysis models. New analysis equivalent models for structural analysis RC and composite waffle and ribbed structures have been developed and compared with the test results. In the paper are presented some generalized conclusions as a basis for the formulation of principles of an optimized design of RC waffle and ribbed slab structures.

  12. Radiative Transfer Model for Translucent Slab Ice on Mars

    Science.gov (United States)

    Andrieu, F.; Schmidt, F.; Douté, S.; Schmitt, B.; Brissaud, O.

    2016-09-01

    We developed a radiative transfer model that simulates in VIS/NIR the bidirectional reflectance of a contaminated slab layer of ice overlaying a granular medium, under geometrical optics conditions to study martian ices.

  13. Evaluation of precast concrete slabs using a heavy vehicle simulator

    CSIR Research Space (South Africa)

    Kohler, E

    2008-10-01

    Full Text Available -controlled conditions and that fully cured precast slabs can potentially be open to traffic almost immediately upon installation, making them attractive for use on heavily travelled highways. This paper describes an accelerated pavement testing experiment conducted...

  14. Fire resistance of extruded hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    2017-01-01

    Purpose – Prefabricated extruded hollow-core slabs are preferred building components for floor structures in several countries. It is therefore important to be able to document the fire resistance of these slabs proving fulfilment of standard fire resistance requirements of 60 and 120 min found...... in most national building regulations. The paper aims to present a detailed analysis of the mechanisms responsible for the loss of loadbearing capacity of hollow-core slabs when exposed to fire. Design/methodology/approach – Furthermore, it compares theoretica calculation and assessment according...... to the structural codes with data derived from a standard fire test and from a thorough examination of the comprehensive test documentation available on fire exposed hollow-core slabs. Findings – Mechanisms for loss of load-bearing capacity are clarified, and evidence of the fire resistance is found. Originality...

  15. Hot dense magnetized ultrarelativistic spinor matter in a slab

    CERN Document Server

    Sitenko, Yu A

    2016-01-01

    Properties of hot dense ultrarelativistic spinor matter in a slab of finite width, placed in a transverse uniform magnetic field, are studied. The admissible set of boundary conditions is determined by the requirement that spinor matter be confined inside the slab. In thermal equilibrium, the chiral separation effect in the slab is shown to depend both on temperature and chemical potential; this is distinct from the unrealistic case of the magnetic field filling the unbounded (infinite) medium, when the effect is temperature-independent. In the realistic case of the slab, a stepwise behaviour of the axial current density at zero temperature is smoothed out as temperature increases, turning into a linear behaviour at infinitely large temperature. A choice of boundary conditions can facilitate either augmentation or attenuation of the chiral separation effect; in particular, the effect can persist even at zero chemical potential, if temperature is nonzero. Thus the boundary condition can serve as a source that ...

  16. Waveform effects of a metastable olivine tongue in subducting slabs

    Science.gov (United States)

    Vidale, John E.; Williams, Quentin; Houston, Heidi

    1991-01-01

    Velocity models of subducting slabs with a kinetically-depressed olivine to beta- and gamma-spinel transition are constructed, and the effect that such structures would have on teleseismic P waveforms are examined using a full-wave finite-difference method. These 2D calculations yielded waveforms at a range of distances in the downdip direction. The slab models included a wedge-shaped, low-velocity metastable olivine tongue (MOTO) to a depth of 670 km, as well as a plausible thermal anomaly; one model further included a 10-km-thick fast layer on the surface of the slab. The principal effect of MOTO is to produce grazing reflections at wide angles off the phase boundary, generating a secondary arrival 0 to 4 seconds after the initial arrival depending on the take-off angle. The amplitude and timing of this feature vary with the lateral location of the seismic source within the slab cross-section.

  17. Fire resistance of extruded hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Giuliani, Luisa; Sørensen, Lars Schiøtt

    2016-01-01

    Prefabricated extruded hollow-core slabs are preferred building components for floor structures in several countries. It is therefore important to be able to document the fire resistance of these slabs proving fulfilment of standard fire resistance requirements of 60- and 120 minutes found in most...... national building regulations. The paper presents a detailed analysis of the mechanisms responsible for the loss of load-bearing capacity of hollow-core slabs when exposed to fire. Furthermore, it compares theoretical calculation and assessment according to the structural codes with data derived from...... a standard fire test and from a thorough examination of the comprehensive test documentation available on fire exposed hollow-core slabs. Mechanisms for loss of load-bearing capacity are clarified, and evidence of the fire resistance is found. For the first time the mechanisms responsible for loss of load...

  18. Benchmark study for total enery electrons in thick slabs

    Science.gov (United States)

    Jun, I.

    2002-01-01

    The total energy deposition profiles when highenergy electrons impinge on a thick slab of elemental aluminum, copper, and tungsten have been computed using representative Monte Carlo codes (NOVICE, TIGER, MCNP), and compared in this paper.

  19. Wind slab formation in snow: experimental setup and first results

    Science.gov (United States)

    Sommer, Christian; Lehning, Michael; Fierz, Charles

    2016-04-01

    The formation of wind-hardened surface layers, also known as wind slabs or wind crusts, is studied. Better knowledge about which processes and parameters are important will lead to an improved understanding of the mass balances in polar and alpine areas. It will also improve snow-cover models (i.e. SNOWPACK) as well as the forecast of avalanche danger. A ring-shaped wind tunnel has been built and instrumented. The facility is ring-shaped to simulate an infinitely long snow surface (infinite fetch). A SnowMicroPen (SMP) is used to measure the snow hardness. Other sensors measure environmental conditions such as wind velocity, air temperature, air humidity, the temperature of the snow and of the snow surface. A camera is used to detect drifting particles and to measure the Specific Surface Area (SSA) at the snow surface via near-infrared photography. First experiments indicate that mechanical fragmentation followed by sintering is the most efficient process to harden the surface. The hardness increased rapidly during drifting snow events, but only slowly or not at all when the wind speed was kept below the threshold for drifting snow. With drifting, the penetration resistance increased from the original 0.07 N to around 0.3 N in about an hour. Without drifting, a slow, further increase in resistance was observed. In about six hours, the hardness of the top 1-2 cm increased to 0.5 N. During this eight-hour experiment consisting of about two hours with intermittent drifting and six hours without drifting, the density at the surface increased from 66 kg/m3 to around 170 kg/m3. In the unaffected region close to the ground, the density increased from 100 kg/m3 to 110 kg/m3.

  20. Flexural Behavior of Two-Way Sandwiched Slabs

    OpenAIRE

    Pachpande, Jivan Vilas

    2015-01-01

    This dissertation presents the details of the findings of a study focused on evaluating the structural behavior of three-dimensional (3D) cementitious sandwich panels with Expanded Polystyrene (EPS) foam core for two-way slab applications. In this study, both theoretical and finite element numerical analysis procedures were adopted to predict the performance of such slabs under out-of-plane loading conditions. The results from theoretical and finite element analysis were verified by compariso...

  1. Analysis of flat slab building with and without shear wall

    OpenAIRE

    Dhanaji R. Chavan; Mohite D. D.; Dr. C. P. Pise; Pawar Y. P; Kadam S.S.; Deshmukh C. M.

    2016-01-01

    The analytical research carried out to study the behaviour flat slab building with and without shear wall reported in the present work. For analysis 15 storied flat slab building is analyzed for seismic behaviour. Response spectrum method is used for analysis considering different shear wall positions using ETABS software. Five different positions of shear wall were studied for analysis. From this analysis shear wall at core having square shape is most suitable case for construction of shear ...

  2. Analysis of flat slab building with and without shear wall

    Directory of Open Access Journals (Sweden)

    Dhanaji R. Chavan

    2016-10-01

    Full Text Available The analytical research carried out to study the behaviour flat slab building with and without shear wall reported in the present work. For analysis 15 storied flat slab building is analyzed for seismic behaviour. Response spectrum method is used for analysis considering different shear wall positions using ETABS software. Five different positions of shear wall were studied for analysis. From this analysis shear wall at core having square shape is most suitable case for construction of shear wall.

  3. Slab Tracking and Controlling on Hot Plate Rolling Line

    Institute of Scientific and Technical Information of China (English)

    姚小兰; 邓波; 梁启宏; 李保奎

    2004-01-01

    By studying the slab moving in detail in the plate rolling process, the problem of slab tracking and controlling was solved by using the distributed control system. The problems of rhythm control for the big-complex system, the exchange of manual and automatic operations, the data exchange between the levelⅠ, TCS (technology control system) and levelⅡ, PCS (process control system), are solved. By this way, the automatic level of the plate production line is improved.

  4. Problem of punching shear in slabs on culumns

    OpenAIRE

    Bartol, Jože

    2007-01-01

    Existing technical solutions enabling sufficient punching resistance failure of flot slabs were analyzed. The reasons that ultimately lead to punching shear and the consequences of shear punching were examined as well. The main causes of punching shear are the condensed shear stresses in the part of the slab that is in contact with the columns. Symbols used at punching shear and an overlook of elements with appropriate reinforcement calculation were presented. The control exten...

  5. Repulsive Casimir forces with finite-thickness slabs

    Science.gov (United States)

    Zhao, R.; Koschny, Th.; Economou, E. N.; Soukoulis, C. M.

    2011-02-01

    We use the extended Lifshitz theory to study the behaviors of the Casimir forces between finite-thickness effective medium slabs. We first study the interaction between a semi-infinite Drude metal and a finite-thickness magnetic slab with or without substrate. For no substrate, the large distance d dependence of the force is repulsive and goes as 1/d5; for the Drude metal substrate, a stable equilibrium point appears at an intermediate distance that can be tuned by the thickness of the slab. We then study the interaction between two identical chiral metamaterial slabs, with and without substrate. For no substrate, the finite thickness of the slabs D does not significantly influence the repulsive character of the force at short distances, while the attractive character at large distances becomes weaker and behaves as 1/d6; for the Drude metal substrate, the finite thickness of the slabs D does not influence the repulsive force too much at short distances until D=0.05λ0.

  6. Seismic Evidence for Possible Slab Melting from Strong Scattering Waves

    Directory of Open Access Journals (Sweden)

    Cheng-Horng Lin

    2011-01-01

    Full Text Available Slab melting in young and hot subduction zones has been studied using geochemical observations and thermal modelling, but there are few data from seismic studies to confirm slab melting. Also the detailed geometry in the deep part of the melting slab is often ambiguous in that the intraslab earthquakes within the Wadati-Benioff zone are only limited to shallower depths. To improve our understanding of both the seismic features and geometry found in a young and hot subducted slab, I analyzed anomalous moonquake-like seismograms that were generated by an intermediate-depth earthquake recorded in central Japan. For this study, possible reflected (or scattered sources were examined using detailed analyses of particle motions and a grid search for travel-time differences between the direct and later P-waves. The results show that using strong seismic scattering, slab melting is likely occurring in the deeper, flexing part of the subducted Philippine Sea plate. Because the subducted Philippine Sea plate in central Japan is young and therefore hot, partial melting might have taken place to produce abundant melting spots in the subducted slab. Melting spots, identified as ¡§bright spots,¡¨ could efficiently reflect or scatter seismic energy and generate many later phases with large amplitudes.

  7. CYCLIC TEMPERATURE LOADING RESIDUAL FLEXURAL STRENGHT OF REFRACTORY SLABS

    Directory of Open Access Journals (Sweden)

    Ondřej Holčapek

    2017-05-01

    Full Text Available This paper describes the effect of cyclic elevated temperature loading on refractory slabs made from high performance, fibre reinforced cement composite. Slabs were produced from aluminous cement-based composites, reinforced by different dosages of basalt fibres. The composite investigated in this study had self-compacting characteristics. The slabs used were exposed to different thermal loading – 600 °C, 1000 °C, six times applied 600 °C and 1000 °C. Then, flexural strength was investigated in all groups of slabs, including group reference slabs with no thermal loading. The results show that the appropriate combination of aluminous cement, natural basalt aggregate, fine filler and basalt fibres in dosage 1.00% of volume is able to successfully resist to cyclic temperature loading. Tensile strength in bending of these slabs (after cyclic temperature loading at 600 °C achieved 6.0 MPa. It was demonstrated that it is possible to use this composite for high extensive conditions in real industrial conditions.

  8. Strengthening of RC bridge slabs using CFRP sheets

    Directory of Open Access Journals (Sweden)

    Fahmy A. Fathelbab

    2014-12-01

    Full Text Available Many old structures became structurally insufficient to carry the new loading conditions requirements. Moreover, they suffer from structural degradation, reinforcement steel bars corrosion, bad weather conditions…etc. Many official authorities in several countries had recognized many old bridges and buildings as structurally deficient by today’s standards. Due to these reasons, structural strengthening became an essential requirement and different strengthening techniques appeared in market. Fiber Reinforced Polymer (FRP strengthening techniques established a good position among all other techniques, giving excellent structural results, low time required and moderate cost compared with the other techniques. The main purpose of this research is to study analytically the strengthening of a reinforced concrete bridge slabs due to excessive loads, using externally bonded FRP sheets technique. A commercial finite element program ANSYS was used to perform a structural linear and non-linear analysis for strengthened slab models using several schemes of FRP sheets. A parametric study was performed to evaluate analytically the effect of changing both FRP stiffness and FRP schemes in strengthening RC slabs. Comparing the results with control slab (reinforced concrete slab without strengthening it is obvious that attaching FRP sheets to the RC slab increases its capacity and enhances the ductility/toughness.

  9. Plate tectonics. Seismological detection of slab metamorphism.

    Science.gov (United States)

    Julian, Bruce

    2002-05-31

    The occurrence of more or less continuous ground vibrations ("volcanic tremor") is an important indicator of volcanic activity. But results from the "Hi-net" seismic network in Japan reported by Obara show that continuous ground vibrations can occur far away from any volcanic activity. In his Perspective, Julian discusses the idea that this tremor is excited by flow of metamorphic fluids. He also identifies other possible locations where such a tremor may be detected and explains what may be learnt from measuring it.

  10. Broadband local dielectric spectroscopy

    Science.gov (United States)

    Labardi, M.; Lucchesi, M.; Prevosto, D.; Capaccioli, S.

    2016-05-01

    A route to extend the measurement bandwidth of local dielectric spectroscopy up to the MHz range has been devised. The method is based on a slow amplitude modulation at a frequency Ω of the excitation field oscillating at a frequency ω and the coherent detection of the modulated average electric force or force gradient at Ω. The cantilever mechanical response does not affect the measurement if Ω is well below its resonant frequency; therefore, limitations on the excitation field frequency are strongly reduced. Demonstration on a thin poly(vinyl acetate) film is provided, showing its structural relaxation spectrum on the local scale up to 45 °C higher than glass temperature, and nanoscale resolution dielectric relaxation imaging near conductive nanowires embedded in the polymer matrix was obtained up to 5 MHz frequency, with no physical reason to hinder further bandwidth extension.

  11. Standing sausage modes in curved coronal slabs

    Science.gov (United States)

    Pascoe, D. J.; Nakariakov, V. M.

    2016-09-01

    Context. Magnetohydrodynamic waveguides such as dense coronal loops can support standing modes. The ratios of the periods of oscillations for different longitudinal harmonics depend on the dispersive nature of the waveguide and so may be used as a seismological tool to determine coronal parameters. Aims: We extend models of standing sausage modes in low β coronal loops to include the effects of loop curvature. The behaviour of standing sausage modes in this geometry is used to explain the properties of observed oscillations that cannot be accounted for using straight loop models. Methods: We perform 2D numerical simulations of an oscillating coronal loop, modelled as a dense slab embedded in a potential magnetic field. The loop is field-aligned and so experiences expansion with height in addition to being curved. Standing sausage modes are excited by compressive perturbations of the loop and their properties are studied. Results: The spatial profiles of standing sausage modes are found to be modified by the expanding loop geometry typical for flaring loops and modelled by a potential magnetic field in our simulations. Longitudinal harmonics of order n > 1 have anti-nodes that are shifted towards the loop apex and the amplitude of anti-nodes near the loop apex is smaller than those near the loop footpoints. Conclusions: We find that the observation of standing sausage modes by the Nobeyama Radioheliograph in a flaring coronal loop on 12 January 2000 is consistent with interpretation in terms of the global mode (n = 1) and third harmonic (n = 3). This interpretation accounts for the period ratio and spatial structure of the observed oscillations.

  12. All-dielectric metamaterials.

    Science.gov (United States)

    Jahani, Saman; Jacob, Zubin

    2016-01-01

    The ideal material for nanophotonic applications will have a large refractive index at optical frequencies, respond to both the electric and magnetic fields of light, support large optical chirality and anisotropy, confine and guide light at the nanoscale, and be able to modify the phase and amplitude of incoming radiation in a fraction of a wavelength. Artificial electromagnetic media, or metamaterials, based on metallic or polar dielectric nanostructures can provide many of these properties by coupling light to free electrons (plasmons) or phonons (phonon polaritons), respectively, but at the inevitable cost of significant energy dissipation and reduced device efficiency. Recently, however, there has been a shift in the approach to nanophotonics. Low-loss electromagnetic responses covering all four quadrants of possible permittivities and permeabilities have been achieved using completely transparent and high-refractive-index dielectric building blocks. Moreover, an emerging class of all-dielectric metamaterials consisting of anisotropic crystals has been shown to support large refractive index contrast between orthogonal polarizations of light. These advances have revived the exciting prospect of integrating exotic electromagnetic effects in practical photonic devices, to achieve, for example, ultrathin and efficient optical elements, and realize the long-standing goal of subdiffraction confinement and guiding of light without metals. In this Review, we present a broad outline of the whole range of electromagnetic effects observed using all-dielectric metamaterials: high-refractive-index nanoresonators, metasurfaces, zero-index metamaterials and anisotropic metamaterials. Finally, we discuss current challenges and future goals for the field at the intersection with quantum, thermal and silicon photonics, as well as biomimetic metasurfaces.

  13. Dielectric Metamaterial Reflector

    Science.gov (United States)

    2017-02-14

    induced plasma coupled to a fluidized bed reactor have been utilized at SRI for 20+ years. As such, it would seem that Si particles may be easier to... etching process limits this process to cm2 areas. There have been several studies and demonstrations of the optical properties of dilute as well...magnetic optical response in a dielectric nanoparticle by ultrafast photoexcitation of dense electron–hole plasma . Nano letters, 15(9), pp.6187-6192. 34

  14. All-dielectric metamaterials

    Science.gov (United States)

    Jahani, Saman; Jacob, Zubin

    2016-01-01

    The ideal material for nanophotonic applications will have a large refractive index at optical frequencies, respond to both the electric and magnetic fields of light, support large optical chirality and anisotropy, confine and guide light at the nanoscale, and be able to modify the phase and amplitude of incoming radiation in a fraction of a wavelength. Artificial electromagnetic media, or metamaterials, based on metallic or polar dielectric nanostructures can provide many of these properties by coupling light to free electrons (plasmons) or phonons (phonon polaritons), respectively, but at the inevitable cost of significant energy dissipation and reduced device efficiency. Recently, however, there has been a shift in the approach to nanophotonics. Low-loss electromagnetic responses covering all four quadrants of possible permittivities and permeabilities have been achieved using completely transparent and high-refractive-index dielectric building blocks. Moreover, an emerging class of all-dielectric metamaterials consisting of anisotropic crystals has been shown to support large refractive index contrast between orthogonal polarizations of light. These advances have revived the exciting prospect of integrating exotic electromagnetic effects in practical photonic devices, to achieve, for example, ultrathin and efficient optical elements, and realize the long-standing goal of subdiffraction confinement and guiding of light without metals. In this Review, we present a broad outline of the whole range of electromagnetic effects observed using all-dielectric metamaterials: high-refractive-index nanoresonators, metasurfaces, zero-index metamaterials and anisotropic metamaterials. Finally, we discuss current challenges and future goals for the field at the intersection with quantum, thermal and silicon photonics, as well as biomimetic metasurfaces.

  15. Dielectric spectroscopy of polyaniline

    Energy Technology Data Exchange (ETDEWEB)

    Calleja, R.D.; Matveeva, E.M. [Polytechnical Univ. of Valencia, (Spain)

    1993-12-31

    Polyaniline films (PANI) are being considered as attractive new galvanic sources, electrochromic displays, chemical sensors, etc. So far much work has been done to study their optical, electrochemical and electrical properties. However, there are still doubts about the basic electric conductivity mechanisms of PANI. The aim of this paper is to study the influence of water molecules and acid anions on the properties of PANI films by dielectric spectroscopy.

  16. Effect of Cold Temperature on the Dielectric Constant of Soil

    Science.gov (United States)

    2012-04-01

    25.8 mm, d = 17.0 mm, si = 37.0 mm, and so = 37.5 mm. The ring and its feedlines are signal-carrying conductors in microstrip . Beneath the ring...is a printed circuit board (PCB) of uniform thickness and dielectric constant, and beneath the PCB dielectric is a metal ground plane. RF energy...Modeling of Ring Resonators; in Microwave Ring Circuits and Related Structures, 2nd ed., Hoboken, NJ: John Wiley & Sons, 2004, h. 2, Sec. 2.2, pp. 6

  17. Novel Radon Sub-Slab Suctioning System

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2013-01-01

    insulation layer located on top of a capillary-breaking layer) mounted in turn on stable ground. The new system of prefabricated lightweight elements consists of the capillary-breaking layer and a pressure-reduction zone which is working as the radonsuction zone. The radon-suctioning layer is formed from...

  18. Tunable dielectric properties of ferrite-dielectric based metamaterial.

    Science.gov (United States)

    Bi, K; Huang, K; Zeng, L Y; Zhou, M H; Wang, Q M; Wang, Y G; Lei, M

    2015-01-01

    A ferrite-dielectric metamaterial composed of dielectric and ferrite cuboids has been investigated by experiments and simulations. By interacting with the electromagnetic wave, the Mie resonance can take place in the dielectric cuboids and the ferromagnetic precession will appear in the ferrite cuboids. The magnetic field distributions show the electric Mie resonance of the dielectric cuboids can be influenced by the ferromagnetic precession of ferrite cuboids when a certain magnetic field is applied. The effective permittivity of the metamaterial can be tuned by modifying the applied magnetic field. A good agreement between experimental and simulated results is demonstrated, which confirms that these metamaterials can be used for tunable microwave devices.

  19. Mantle flow and dynamic topography associated with slab window opening

    Science.gov (United States)

    Guillaume, Benjamin; Moroni, Monica; Funiciello, Francesca; Martinod, Joseph; Faccenna, Claudio

    2010-05-01

    A slab window is defined as an 'hole' in the subducting lithosphere. In the classical view, slab windows develop where a spreading ridge intersects a subduction zone. The main consequences of this phenomenon are the modifications of the physical, chemical and thermal conditions in the backarc mantle that in turn affect the tectonic and magmatic evolution of the overriding plate. In this work, we perform dynamically self-consistent mantle-scale laboratory models, to evaluate how the opening of a window in the subducting panel influences the geometry and the kinematics of the slab, the mantle circulation pattern and, finally, the overriding plate dynamic topography. The adopted setup consists in a two-layer linearly viscous system simulating the roll-back of a fixed subducting plate (simulated using silicone putty) into the upper mantle (simulated using glucose syrup). Our experimental setting is also characterized by a constant-width rectangular window located at the center of a laterally confined slab, modeling the case of the interaction of a trench-parallel spreading ridge with a wide subduction zone. We find that the geometry and the kinematics of the slab are only minorly affected by the opening of a slab window. On the contrary, slab induced mantle circulation, quantified using Feature Tracking image analysis technique, is strongly modified and produces a peculiar non-isostatic topographic signal on the overriding plate. Assuming that our modeling results can be representative of the natural behavior of subduction zones, we compare them to the Patagonian subduction zone finding that anomalous backarc volcanism that developed since middle Miocene could result from the lateral flowage of subslab mantle, and that part of the Patagonian uplift could be dynamically supported.

  20. Strength Behaviour Of Biomass Fiber-Reinforced Concrete Slab

    Directory of Open Access Journals (Sweden)

    Chai Teck Jung

    2012-05-01

    Full Text Available This paper investigates the compressive strength and flexural strength of biomass fibre-reinforced concrete slab. The main objective of this study is to examine the effect of biomass aggregate and fibre glass on the concrete slab strength. The biomass aggregate is used to replace the natural aggregates. A total of 36 slab samples (250 mm x 600 mm x 50mm thick and 36 numbers of 150 mm cube samples containing 0%, 30%, 60% and 100% biomass aggregate were prepared.  The E-class fibre and Supracoat SP800 were added to increase the strength and to achieve the required workability. All the samples were cured in water with room temperature of around 27oC and tested at the age of 7, 14 and 28 days respectively. The result showed that cube specimens containing 30% biomass aggregate concrete achieved minimum strength of 15 MPa at 28 days. The flexural strength for slab specimens containing 30% biomass aggregate, Supracoat SP 800 and fibre glass gained higher strength compared with control specimens. The 100% biomass aggregate slab achieved 88% of the control specimen strength. The workability was between 150 mm to 170mm slump. The density of the specimens was reduced 20% for cube and 28% for slab compared with control specimens. It can be concluded that the biomass aggregate has good potential as partial aggregate replacement in slab construction when combined with the use of glass fibre and superplasticizer. However, more research needs to be carried out to self-compacting biomass aggregate concrete for sustainable construction

  1. Modeling the surface photovoltage of silicon slabs with varying thickness.

    Science.gov (United States)

    Vazhappilly, Tijo; Kilin, Dmitri S; Micha, David A

    2015-04-10

    The variation with thickness of the energy band gap and photovoltage at the surface of a thin semiconductor film are of great interest in connection with their surface electronic structure and optical properties. In this work, the change of a surface photovoltage (SPV) with the number of layers of a crystalline silicon slab is extracted from models based on their atomic structure. Electronic properties of photoexcited slabs are investigated using generalized gradient and hybrid density functionals, and plane wave basis sets. Si(1 1 1) surfaces have been terminated by hydrogen atoms to compensate for dangling bonds and have been described by large supercells with periodic boundary conditions. Calculations of the SPV of the Si slabs have been done in terms of the reduced density matrix of the photoactive electrons including dissipative effects due to their interaction with medium phonons and excitons. Surface photovoltages have been calculated for model Si slabs with 4-12, and 16 layers, to determine convergence trends versus slab thickness. Band gaps and the inverse of the SPVs have been found to scale nearly linearly with the inverse thickness of the slab, while the electronic density of states increases quadratically with thickness. Our calculations show the same trends as experimental values indicating band gap reduction and absorption enhancement for Si films of increasing thickness. Simple arguments on confined electronic structures have been used to explain the main effects of changes with slab thickness. A procedure involving shifted electron excitation energies is described to improve results from generalized gradient functionals so they can be in better agreement with the more accurate but also more computer intensive values from screened exchange hybrid functionals.

  2. Tomographic imaging of the effects of Peruvian flat slab subduction on the Nazca slab and surrounding mantle under central and southern Peru

    Science.gov (United States)

    Scire, A. C.; Zandt, G.; Beck, S. L.; Bishop, B.; Biryol, C. B.; Wagner, L. S.; Long, M. D.; Minaya, E.; Tavera, H.

    2014-12-01

    The modern central Peruvian Andes are dominated by a laterally extensive region of flat slab subduction. The Peruvian flat slab extends for ~1500 km along the strike of the Andes, correlating with the subduction of the Nazca Ridge in the south and the theorized Inca Plateau in the north. We have used data from the CAUGHT and PULSE experiments for finite frequency teleseismic P- and S-wave tomography to image the Nazca slab in the upper mantle below 95 km depth under central Peru between 10°S and 18°S as well as the surrounding mantle. Since the slab inboard of the subducting Nazca Ridge is mostly aseismic, our results provide important constraints on the geometry of the subducting Nazca slab in this region. Our images of the Nazca slab suggest that steepening of the slab inboard of the subducting Nazca Ridge locally occurs ~100 km further inland than was indicated in previous studies. The region where we have imaged the steepening of the Nazca slab inboard of the Nazca Ridge correlates with the location of the Fitzcarrald Arch, a long wavelength upper plate topographic feature which has been suggested to be a consequence of ridge subduction. When the slab steepens inboard of the flat slab region, it does so at a very steep (~70°) angle. The transition from the Peruvian flat slab to the more normally dipping slab south of 16°S below Bolivia is characterized by an abrupt bending of the slab anomaly in the mantle in response to the shift from flat to normal subduction. The slab anomaly appears to be intact south of the Nazca Ridge with no evidence for tearing of the slab in response to the abrupt change in slab dip. A potential tear in the slab is inferred from an observed offset in the slab anomaly north of the Nazca Ridge extending subparallel to the ridge axis between 130 and 300 km depth. A high amplitude (-5-6%) slow S-wave velocity anomaly is observed below the projection of the Nazca Ridge. This anomaly appears to be laterally confined to the mantle

  3. Dielectric loss determination using perturbation

    OpenAIRE

    Andrawis, Madeleine Y.

    1991-01-01

    A dielectric filled cavity structure is currently being used to estimate the dielectric constant and loss factor over a wide range of frequencies of a dielectric material which fills the cavity structure [Saed, 1987]. A full field analysis is used to compute the effective complex permittivity of the sample material based on reflection coefficient measurements of the cavity structure and associated geometrical dimensions. The method has previously been used successfully to de...

  4. Application of Finite Difference Time Domain to Calculate the Transmission Coefficient of an Electromagnetic Wave Impinging Perpendicularly on a Dielectric Interface with Modified MUR-I ABC

    Directory of Open Access Journals (Sweden)

    Biswajeet Mukherjee

    2012-07-01

    Full Text Available MATLAB codes were implemented in this study for a one dimension wave formulation using the computational technique of finite difference time domain (FDTD method. The codes have then been verified under two cases, one a simple one dimensional wave impinging perpendicularly on a dielectric layer from air interface and second is a one dimensional wave impinging momentarily on a small dielectric slab. The transmission coefficients under both the cases have also been verified. For the former case, there is a constant transmission coefficient irrespective of the frequency of the electromagnetic wave impinging on it and for the latter; there is a sinusoidal type variation due to multiple reflections along the wall of the dielectric slab. In the course of this implementation of the codes a novel technique to implement the absorbing boundary condition (ABC on the dielectric interface has also been devised based on the Mur-I ABC which has been verified for a dielectric of dielectric constant 4єo. The implementation of the codes presents a recapitulation of the evolution of FDTD from Yee’s Algorithm to the latest modifications in the ABC.

  5. Dielectric properties of fly ash

    Indian Academy of Sciences (India)

    S C Raghavendra; R L Raibagkar; A B Kulkarni

    2002-02-01

    This paper reports the dielectric properties of fly ash. The dielectric measurements were performed as a function of frequency and temperature. The sample of fly ash shows almost similar behaviour in the frequency and temperature range studied. The large value of dielectric constant in the typical frequency range is because of orientation polarization and tight binding force between the ions or atoms in the fly ash. The sample of fly ash is of great scientific and technological interest because of its high value of dielectric constant (104).

  6. Numerical modelling of GPR ground-matching enhancement by a chirped multilayer structure - output of cooperation within COST Action TU1208

    Science.gov (United States)

    Baghdasaryan, Hovik V.; Knyazyan, Tamara M.; Hovhannisyan, Tamara. T.; Marciniak, Marian; Pajewski, Lara

    2016-04-01

    As is well know, Ground Penetrating Radar (GPR) is an electromagnetic technique for the detection and imaging of buried objects, with resolution ranging from centimeters to few meters [1, 2]. Though this technique is mature enough and different types of GPR devices are already in use, some problems are still waiting for their solution [3]. One of them is to achieve a better matching of transmitting GPR antenna to the ground, that will increase the signal penetration depth and the signal/noise ratio at the receiving end. In the current work, a full-wave electromagnetic modelling of the interaction of a plane wave with a chirped multilayered structure on the ground is performed, via numerical simulation. The method of single expression is used, which is a suitable technique for multi-boundary problems solution [4, 5]. The considered multilayer consists of two different dielectric slabs of low and high permittivity, where the highest value of permittivity doesn't exceed the permittivity of the ground. The losses in the ground are suitably taken into account. Two types of multilayers are analysed. Numerical results are obtained for the reflectance from the structure, as well as for the distributions of electric field components and power flow density in both the considered structures and the ground. The obtained results indicate that, for a better matching with the ground, the layer closer to the ground should be the high-permittivity one. Acknowledgement This work benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" (www.GPRadar.eu, www.cost.eu). Part of this work was developed during the Short-Term Scientific Mission COST-STSM-TU1208-25016, carried out by Prof. Baghdasaryan in the National Institute of Telecommunications in Warsaw, Poland. References [1] H. M. Jol. Ground Penetrating Radar: Theory and Applications. Elsevier, 2009. 509 pp. [2] R. Persico. Introduction to

  7. Calibrating a large slab vessel: A battle of the bulge

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, I.R. [Westinghouse Idaho Nuclear Co., Inc., Idaho Falls, ID (United States). Safeguards and Security Section

    1993-12-31

    The accurate measurement of volume in slab vessels can be difficult because slab vessels expand--in spite of internal or external supports--as they are filled. One form of bulging is elastic deflection, a gradual expansion of the vessel wall resulting from an increased weight of contained solution. As part of an upgrade to the Idaho Chemical Processing Plant, slab tanks were proposed as accountability measurement vessels. A 1960 liter slab tank prototype was set up for preliminary calibrations. Two series of calibrations were conducted: the first using water, and the second using aluminum nitrate. It was conjectured that the increased weight of aluminum nitrate would cause the vessel walls to deflect more than they did for an equal level of water, resulting in a greater volume. As expected, a significant expansion was observed with the aluminum nitrate, but some of the deflection proved to be permanent rather than elastic. The consequence is that considerably more effort will be required to calibrate slab vessels for uranium accountability. Not only must a calibration curve (or family of curves) be developed giving volume as a function of both liquid level and density, but, if possible, a determination must be made as to when the deflection is no longer temporary.

  8. The subduction dichotomy of strong plates and weak slabs

    Science.gov (United States)

    Petersen, Robert I.; Stegman, Dave R.; Tackley, Paul J.

    2017-03-01

    A key element of plate tectonics on Earth is that the lithosphere is subducting into the mantle. Subduction results from forces that bend and pull the lithosphere into the interior of the Earth. Once subducted, lithospheric slabs are further modified by dynamic forces in the mantle, and their sinking is inhibited by the increase in viscosity of the lower mantle. These forces are resisted by the material strength of the lithosphere. Using geodynamic models, we investigate several subduction models, wherein we control material strength by setting a maximum viscosity for the surface plates and the subducted slabs independently. We find that models characterized by a dichotomy of lithosphere strengths produce a spectrum of results that are comparable to interpretations of observations of subduction on Earth. These models have strong lithospheric plates at the surface, which promotes Earth-like single-sided subduction. At the same time, these models have weakened lithospheric subducted slabs which can more easily bend to either lie flat or fold into a slab pile atop the lower mantle, reproducing the spectrum of slab morphologies that have been interpreted from images of seismic tomography.

  9. Investigations on Efficiently Interfaced Steel Concrete Composite Deck Slabs

    Directory of Open Access Journals (Sweden)

    K. N. Lakshmikandhan

    2013-01-01

    Full Text Available The strength of the composite deck slab depends mainly on the longitudinal shear transfer mechanism at the interface between steel and concrete. The bond strength developed by the cement paste is weak and causes premature failure of composite deck slab. This deficiency is effectively overcame by a shear transferring mechanism in the form of mechanical interlock through indentations, embossments, or fastening studs. Development of embossment patterns requires an advanced technology which makes the deck profile expensive. Fastening studs by welding weakens the joint strength and also escalates the cost. The present investigation is attempted to arrive at a better, simple interface mechanism. Three types of mechanical connector schemes are identified and investigated experimentally. All of the three shear connector schemes exhibited full shear interaction with negligible slip. The strength and stiffness of the composite slabs with shear connectors are superior about one and half time compared to these of the conventional reinforced concrete slabs and about twice compared to these of composite slabs without mechanical shear connectors. The scheme2 and scheme3 shear connector mechanisms integrate deck webs and improve strength and stiffness of the deck, which can effectively reduce the cost of formworks and supports efficiently.

  10. Fossil slabs attached to unsubducted fragments of the Farallon plate.

    Science.gov (United States)

    Wang, Yun; Forsyth, Donald W; Rau, Christina J; Carriero, Nina; Schmandt, Brandon; Gaherty, James B; Savage, Brian

    2013-04-02

    As the Pacific-Farallon spreading center approached North America, the Farallon plate fragmented into a number of small plates. Some of the microplate fragments ceased subducting before the spreading center reached the trench. Most tectonic models have assumed that the subducting oceanic slab detached from these microplates close to the trench, but recent seismic tomography studies have revealed a high-velocity anomaly beneath Baja California that appears to be a fossil slab still attached to the Guadalupe and Magdalena microplates. Here, using surface wave tomography, we establish the lateral extent of this fossil slab and show that it is correlated with the distribution of high-Mg andesites thought to derive from partial melting of the subducted oceanic crust. We also reinterpret the high seismic velocity anomaly beneath the southern central valley of California as another fossil slab extending to a depth of 200 km or more that is attached to the former Monterey microplate. The existence of these fossil slabs may force a reexamination of models of the tectonic evolution of western North America over the last 30 My.

  11. Mid-infrared hyperbolic metamaterial based on graphene-dielectric multilayers

    Science.gov (United States)

    Chang, You-Chia; Kildishev, Alexander V.; Narimanov, Evgenii E.; Liu, Che-Hung; Liu, Chang-Hua; Zhang, Siyuan; Marder, Seth R.; Zhong, Zhaohui; Norris, Theodore B.

    2015-09-01

    Graphene-based hyperbolic metamaterials (HMMs) enable new possibilities that are not attainable with conventional metal-based HMMs, such as tunability of optical properties and the ability to combine with graphene-based photodetection. A graphene HMM is made of alternating graphene-dielectric multilayers, whose properties can be understood with the effective-medium approximation (EMA). The initial experimental realization of this novel metamaterial has been demonstrated with a far-field measurement, and in this paper we investigate the light coupling from free space into a graphene HMM slab with a metallic grating using numerical simulations. We show that light can be efficiently coupled into the high-k guided modes in the HMM slab and be absorbed by the graphene layers, which can be applied to create ultrathin super absorbers.

  12. Dielectric materials and electrostatics

    CERN Document Server

    Gallot-Lavalle, Olivier

    2013-01-01

    An introduction to the physics of electrical insulation, this book presents the physical foundations of this discipline and the resulting applications. It is structured in two parts. The first part presents a mathematical and intuitive approach to dielectrics; various concepts, including polarization, induction, forces and losses are discussed. The second part provides readers with the keys to understanding the physics of solid, liquid and gas insulation. It comprises a phenomenological description of discharges in gas and its resulting applications. Finally, the main electrical properties

  13. Inorganic optical dielectric films

    Science.gov (United States)

    Woollam, John A.

    1996-07-01

    Dielectric coatings have been in use for a very long time, yet today they represent a steadily growing wold-wide industry. A wide range of materials, and applications from the near ultraviolet into the infrared are in use, or under development. This paper is a brief survey, including references to the literature, and a discussion of materials diagnostics. Discussed is the microstructure, optical constants and their relationship as determined especially by optical measurements. This paper emphasizes the materials science aspects rather than applications.

  14. Low frequency vibration tests on a floating slab track in an underground laboratory

    Institute of Scientific and Technical Information of China (English)

    De-yun DING; Wei-ning LIU; Ke-fei LI; Xiao-jing SUN; Wei-feng LIU

    2011-01-01

    Low frequency vibrations induced by underground railways have attracted increasing attention in recent years. To obtain the characteristics of low frequency vibrations and the low frequency performance of a floating slab track (FST), low frequency vibration tests on an FST in an underground laboratory at Beijing Jiaotong University were carried out. The FST and an unbalanced shaker SBZ30 for dynamic simulation were designed for use in low frequency vibration experiments. Vibration measurements were performed on the bogie of the unbalanced shaker, the rail, the slab, the tunnel invert, the tunnel wall, the tunnel apex, and on the ground surface at distances varying from 0 to 80 m from the track. Measurements were also made on several floors of an adjacent building. Detailed results of low frequency vibration tests were reported. The attenuation of low frequency vibrations with the distance from the track was presented, as well as the responses of different floors of the building. The experimental results could be regarded as a reference for developing methods to control low frequency vibrations and for adopting countermeasures.

  15. Snow Slab Release, its Mechanism and Conclusion for the Arrangements of Supporting Structures

    Directory of Open Access Journals (Sweden)

    Bruno Salm

    1995-04-01

    Full Text Available The paper presents a model of snow slab release based on the concept of the presence of ground-parallel thin super-weak layers. The fact that the same snow type under same state may or may not fracture under a certain stress unless a critical strain-rate and critical fracture-strain is reached highlights the necessity of stress and strain-rate concentrations. Super-weak layer, which cannot or can only insufficiently transmit the shear stress caused by the overlying snow layers, is considered to provide such concentrations. The model establishes that although the existence of weak layers in a snowpack is a necessary condition, yet it is not sufficient for avalanche formation. A minimum length of the super-weak zone is required for the crack to propagate leading to the release of a slab avalanche Critical crack lengths are found to be of the order of 5 m to 10 m. Critical value of crack length has been found to be dependent on slope, thickness and viscosity of the weak layer. The model does not hold good, if the super-weak zone vanishes. The paper finally discusses the arrangement of supporting structures to minimise the development of super-weak zones.

  16. Slab detachment of subducted Indo-Australian plate beneath Sunda arc, Indonesia

    Indian Academy of Sciences (India)

    Bhaskar Kundu; V K Gahalaut

    2011-04-01

    Necking, tearing, slab detachment and subsequently slab loss complicate the subduction zone processes and slab architecture. Based on evidences which include patterns of seismicity, seismic tomography and geochemistry of arc volcanoes, we have identified a horizontal slab tear in the subducted Indo-Australian slab beneath the Sunda arc. It strongly reflects on trench migration, and causes along-strike variations in vertical motion and geochemically distinct subduction-related arc magmatism. We also propose a model for the geodynamic evolution of slab detachment.

  17. Goos-Haenchen shifts of the reflected waves from the inhomogeneous slab with a positive and negative index transition layer

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Hongmin; Zang, Taocheng; Sun, Jian; Pan, Tao; Xu, Guoding [Department of Physics, Suzhou University of Science and Technology, Suzhou 215009 (China)

    2012-04-15

    Goos-Haenchen (GH) shifts of the reflected waves through a transition layer where both the dielectric permittivity {epsilon} and magnetic permeability {mu} change linearly from positive to negative values are investigated. Based on invariant imbedding approach and the stationary-phase method, the differential equations for the reflection and transmission coefficients are obtained. We demonstrate numerically the dependence of the shifts on the angle of incidence and the inhomogeneous slab's thickness. The results show that the GH shifts are sensitive to the angle of incidence in a specific thickness. Different thickness of media can result in the different dependences of the shifts on the angle of incidence. At the positions where {epsilon} or {mu} is zero, due to the resonant effect, the GH shifts can be greatly enhanced. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. IMPROVEMENT OF SLAB REHEATING PROCESS AT USIMINAS THROUGH MATHEMATICAL SIMULATION

    Directory of Open Access Journals (Sweden)

    Antônio Adel dos Santos

    2012-09-01

    Full Text Available Basic characteristics and application examples of the mathematical simulator for reheating process in walking-beam type furnaces, that has been developed and applied to Usiminas plate mill line at Ipatinga, are shown in this paper. This is a bi-dimensional mathematical model solved by the finite volume method, validated by temperature measurements inside the slab during heating and coded as a visual tool. Among these applications, the following can be highlighted: (i determination of suitable furnace zone temperatures and residence times for processing steels by accelerated cooling technology; (ii determination of slab average temperature at discharging as well as at each zone exit, supplying data to be fed to the automation system at the comissioning stage; (iii analyses of slab thermal distribution through the reheating process, enabling operational optimization

  19. Efficient Vortex Generation in Subwavelength Epsilon-Near-Zero Slabs

    Science.gov (United States)

    Ciattoni, Alessandro; Marini, Andrea; Rizza, Carlo

    2017-03-01

    We show that a homogeneous and isotropic slab, illuminated by a circularly polarized beam with no topological charge, produces vortices of order 2 in the opposite circularly polarized components of the reflected and transmitted fields, as a consequence of the transverse magnetic and transverse electric asymmetric response of the rotationally invariant system. In addition, in the epsilon-near-zero regime, we find that vortex generation is remarkably efficient in subwavelength thick slabs up to the paraxial regime. This physically stems from the fact that a vacuum paraxial field can excite a nonparaxial field inside an epsilon-near-zero slab since it hosts slowly varying fields over physically large portions of the bulk. Our theoretical predictions indicate that epsilon-near-zero media hold great potential as nanophotonic elements for manipulating the angular momentum of the radiation, since they are available without resorting to complicated micro- or nanofabrication processes and can operate even at very small (ultraviolet) wavelengths.

  20. Can slabs melt beneath forearcs in hot subduction zones?

    Science.gov (United States)

    Ribeiro, J.; Maury, R.; Gregoire, M.

    2015-12-01

    At subduction zones, thermal modeling predict that the shallow part of the downgoing oceanic crust (test the hypothesis that adakites are pristine slab melts. We find that adakites from Baja California and Philippines formed by two distinct petrogenetic scenarios. In Baja California, hydrous mantle melts mixed/mingled with high-pressure (HP) adakite-type, slab melts within a lower crustal (~30 km depth) magma storage region before stalling into the upper arc crust (~7-15 km depth). In contrast, in the Philippines, primitive mantle melts stalled and crystallized within lower and upper crustal magma storage regions to produce silica-rich melts with an adakitic signature. Thereby, slab melting is not required to produce an adakitic geochemical fingerprint in hot subduction zones. However, our results also suggest that the downgoing crust potentially melted beneath Baja California.

  1. Requalification analysis of a circular composite slab for seismic load

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, M.G.; Kot, C.A.

    1992-11-01

    The circular roof slab of an existing facility was analyzed to requalify the structure for supporting a significant seismic load that it was not originally designed for. The slab has a clear span of 66 ft and consists of a 48 in thick reinforced concrete member and a steel liner plate. Besides a number of smaller penetrations, the slab contains two significant cutouts: a 9 ft square opening and a 3 ft dia hole. The issues that complicated the analysis of this non-typical structure, i.e., composite action and nonlinear stiffness of reinforced concrete (R. C.) sections, are discussed. It was possible to circumvent the difficulties by making conservative and simplifying assumptions. If codes incorporate guidelines on practical methods for dynamic analysis of R. C. structures, some of the unneeded conservatism could be eliminated in future designs.

  2. Dynamic triggering of deep earthquakes within a fossil slab

    Science.gov (United States)

    Cai, Chen; Wiens, Douglas A.

    2016-09-01

    The 9 November 2009 Mw 7.3 Fiji deep earthquake is the largest event in a region west of the Tonga slab defined by scattered seismicity and velocity anomalies. The main shock rupture was compact, but the aftershocks were distributed along a linear feature at distances of up to 126 km. The aftershocks and some background seismicity define a sharp northern boundary to the zone of outboard earthquakes, extending westward toward the Vitiaz deep earthquake cluster. The northern earthquake lineament is geometrically similar to tectonic reconstructions of the relict Vitiaz subduction zone at 8-10 Ma, suggesting the earthquakes are occurring in the final portion of the slab subducted at the now inactive Vitiaz trench. A Coulomb stress change calculation suggests many of the aftershocks were dynamically triggered. We propose that fossil slabs contain material that is too warm for earthquake nucleation but may be near the critical stress susceptible to dynamic triggering.

  3. Efficient Vortex Generation in Subwavelength Epsilon-Near-Zero Slabs.

    Science.gov (United States)

    Ciattoni, Alessandro; Marini, Andrea; Rizza, Carlo

    2017-03-10

    We show that a homogeneous and isotropic slab, illuminated by a circularly polarized beam with no topological charge, produces vortices of order 2 in the opposite circularly polarized components of the reflected and transmitted fields, as a consequence of the transverse magnetic and transverse electric asymmetric response of the rotationally invariant system. In addition, in the epsilon-near-zero regime, we find that vortex generation is remarkably efficient in subwavelength thick slabs up to the paraxial regime. This physically stems from the fact that a vacuum paraxial field can excite a nonparaxial field inside an epsilon-near-zero slab since it hosts slowly varying fields over physically large portions of the bulk. Our theoretical predictions indicate that epsilon-near-zero media hold great potential as nanophotonic elements for manipulating the angular momentum of the radiation, since they are available without resorting to complicated micro- or nanofabrication processes and can operate even at very small (ultraviolet) wavelengths.

  4. Spectral characterization of dielectric materials using terahertz measurement systems

    Science.gov (United States)

    Seligman, Jeffrey M.

    measured directly, from which loss tangent, index of refraction, and permittivity was extracted. The test materials were low-loss dielectric slabs ranging in thickness from 1-60 mils. The substrate sheets were PTFE, fiberglass, and epoxy-ceramic composite substrates. The other group was polyethylene plastic sheets (LDPE/HDPE/UMHW) and 3D printer Photopolymers. The results were verified by using several online THz spectral databases and compared to manufacturer data sheets. Permittivity and loss of some of the test samples varied as a function of polarization angle. 0 - 90 degrees of rotation were tested (i.e., H-V, and 45 degrees polarization). Inter-molecular scattering in the composite materials raised the loss considerably. This effect was verified. Standard, well documented, material types were selected for the project for best comparison. These techniques can also be applied to analyze newer substances such as nanodielectrics.

  5. Numerical models of slab migration in continental collision zones

    Directory of Open Access Journals (Sweden)

    V. Magni

    2012-09-01

    Full Text Available Continental collision is an intrinsic feature of plate tectonics. The closure of an oceanic basin leads to the onset of subduction of buoyant continental material, which slows down and eventually stops the subduction process. In natural cases, evidence of advancing margins has been recognized in continental collision zones such as India-Eurasia and Arabia-Eurasia. We perform a parametric study of the geometrical and rheological influence on subduction dynamics during the subduction of continental lithosphere. In our 2-D numerical models of a free subduction system with temperature and stress-dependent rheology, the trench and the overriding plate move self-consistently as a function of the dynamics of the system (i.e. no external forces are imposed. This setup enables to study how continental subduction influences the trench migration. We found that in all models the slab starts to advance once the continent enters the subduction zone and continues to migrate until few million years after the ultimate slab detachment. Our results support the idea that the advancing mode is favoured and, in part, provided by the intrinsic force balance of continental collision. We suggest that the advance is first induced by the locking of the subduction zone and the subsequent steepening of the slab, and next by the sinking of the deepest oceanic part of the slab, during stretching and break-off of the slab. These processes are responsible for the migration of the subduction zone by triggering small-scale convection cells in the mantle that, in turn, drag the plates. The amount of advance ranges from 40 to 220 km and depends on the dip angle of the slab before the onset of collision.

  6. Casimir Effect for Dielectric Plates

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    We generalize Kupisewska method to the three-dimensional system and another derivation of the Casimir effect between two dielectric plates is presented based on the explicit quantization of the electromagnetic field in the presence of dielectrics, where the physical meaning of "evanescent mode" is discussed. The Lifshitz's formula is rederived perfect metallic plates will the evanescent modes become unimportant.

  7. Grounded theory.

    Science.gov (United States)

    Harris, Tina

    2015-04-29

    Grounded theory is a popular research approach in health care and the social sciences. This article provides a description of grounded theory methodology and its key components, using examples from published studies to demonstrate practical application. It aims to demystify grounded theory for novice nurse researchers, by explaining what it is, when to use it, why they would want to use it and how to use it. It should enable nurse researchers to decide if grounded theory is an appropriate approach for their research, and to determine the quality of any grounded theory research they read.

  8. Bayesian Inference for Structured Spike and Slab Priors

    DEFF Research Database (Denmark)

    Andersen, Michael Riis; Winther, Ole; Hansen, Lars Kai

    2014-01-01

    Sparse signal recovery addresses the problem of solving underdetermined linear inverse problems subject to a sparsity constraint. We propose a novel prior formulation, the structured spike and slab prior, which allows to incorporate a priori knowledge of the sparsity pattern by imposing a spatial...... Gaussian process on the spike and slab probabilities. Thus, prior information on the structure of the sparsity pattern can be encoded using generic covariance functions. Furthermore, we provide a Bayesian inference scheme for the proposed model based on the expectation propagation framework. Using...

  9. Tunneling properties of electromagnetic wave in slab superconducting material

    Institute of Scientific and Technical Information of China (English)

    Khem B. Thapa; Sanjay Srivastava; Alka Vishwakarma; S. P. Ojha

    2011-01-01

    When the electromagnetic wave propagates through a slab superconducting material in microwave ranges, tunneling properties of the electromagnetic wave at critical temperature are investigated theoretically. The transmittance and the reflectance of the slab superconducting material vary with the thickness of material as well as the refractive index of substrates.The high transmittance is found for thin superconductor at low wavelength region.However, optical properties are strongly dependent upon temperature and incidence wavelength. The electromagnetic wave is totally transmitted without loss for incidence wavelength (λ = 5000 nm) due to the zero refractive index and infinite penetration depth of the superconductor at the critical temperature.

  10. Repulsive Casimir forces with finite-thickness slabs

    OpenAIRE

    Zhao, R.; Koschny, Th.; Economou, E. N.; C M Soukoulis

    2010-01-01

    We use the extended Lifshitz theory to study the behaviors of the Casimir forces between finite-thickness effective medium slabs. We first study the interaction between a semi-infinite Drude metal and a finite-thickness magnetic slab with or without substrate. For no substrate, the large distance $d$ dependence of the force is repulsive and goes as $1/d^5$; for the Drude metal substrate, a stable equilibrium point appears at an intermediate distance which can be tuned by the thickness of the ...

  11. Three dimensional super-resolution in metamaterial slab lenses

    CERN Document Server

    Mesa, F; Freire, M; Baena, J D

    2005-01-01

    This letter presents a theoretical and experimental study on the viability of obtaining three dimensional super-resolution (i.e. resolution overcoming the diffraction limit for all directions in space) by means of metamaterial slab lenses. Although the source field cannot be actually reproduced at the back side of the lens with super-resolution in all space directions, the matching capabilities of metamaterial slabs does make it possible the detection of images with three-dimensional super-resolution. This imaging takes place because of the coupling between the evanescent space harmonic components of the field generated at both the source and the detector.

  12. Spalling of concrete: A synthesis of experimental tests on slabs

    Directory of Open Access Journals (Sweden)

    Taillefer Nicolas

    2013-09-01

    Full Text Available The article reviews the results of many commercial or research tests carried out in CSTB on middle size concrete slabs. They concern 22 concrete slabs, made of normal and high strength concrete, for a rather wide range of thickness and compressive strength classes. Test procedures and a synthesis of main results are presented in order to provide deeper understanding of near-reality conditions of concrete structures. The tests concerned both new and existing tunnels. Results are detailed in relation with main parameters that are identified as impacting spalling in previous studies, such as concrete composition, concrete properties and specimen size.

  13. Spalling tests on embedded cores and slabs: A comparative study

    Directory of Open Access Journals (Sweden)

    Pimienta P.

    2013-09-01

    Full Text Available A comparative analysis of the spalling of (a cores made of 3 concrete mixes embedded into 3 slabs made of the 3 same concrete mixes; and (b 3 reference slabs made again of the same 3 concrete mixes has been made. Samples have been exposed to the French Increased HydroCarbon temperature curve. Results confirm that concrete spalling phenomena is not only related to the material properties. Concrete spalling is also very much influenced by the geometry of the samples.

  14. Bayesian Inference for Structured Spike and Slab Priors

    DEFF Research Database (Denmark)

    Andersen, Michael Riis; Winther, Ole; Hansen, Lars Kai

    2014-01-01

    Sparse signal recovery addresses the problem of solving underdetermined linear inverse problems subject to a sparsity constraint. We propose a novel prior formulation, the structured spike and slab prior, which allows to incorporate a priori knowledge of the sparsity pattern by imposing a spatial...... Gaussian process on the spike and slab probabilities. Thus, prior information on the structure of the sparsity pattern can be encoded using generic covariance functions. Furthermore, we provide a Bayesian inference scheme for the proposed model based on the expectation propagation framework. Using...

  15. Links between fluid circulation, temperature, and metamorphism in subducting slabs

    Science.gov (United States)

    Spinelli, G.A.; Wang, K.

    2009-01-01

    The location and timing of metamorphic reactions in subducting lithosph??re are influenced by thermal effects of fluid circulation in the ocean crust aquifer. Fluid circulation in subducting crust extracts heat from the Nankai subduction zone, causing the crust to pass through cooler metamorphic faci??s than if no fluid circulation occurs. This fluid circulation shifts the basalt-to-eclogite transition and the associated slab dehydration 14 km deeper (35 km farther landward) than would be predicted with no fluid flow. For most subduction zones, hydrothermal cooling of the subducting slab will delay eclogitization relative to estimates made without considering fluid circulation. Copyright 2009 by the American Geophysical Union.

  16. Resonance-enhanced optical forces between coupled photonic crystal slabs.

    Science.gov (United States)

    Liu, Victor; Povinelli, Michelle; Fan, Shanhui

    2009-11-23

    The behaviors of lateral and normal optical forces between coupled photonic crystal slabs are analyzed. We show that the optical force is periodic with displacement, resulting in stable and unstable equilibrium positions. Moreover, the forces are strongly enhanced by guided resonances of the coupled slabs. Such enhancement is particularly prominent near dark states of the system, and the enhancement effect is strongly dependent on the types of guided resonances involved. These structures lead to enhancement of light-induced pressure over larger areas, in a configuration that is directly accessible to externally incident, free-space optical beams.

  17. Dielectric laser accelerators

    Science.gov (United States)

    England, R. Joel; Noble, Robert J.; Bane, Karl; Dowell, David H.; Ng, Cho-Kuen; Spencer, James E.; Tantawi, Sami; Wu, Ziran; Byer, Robert L.; Peralta, Edgar; Soong, Ken; Chang, Chia-Ming; Montazeri, Behnam; Wolf, Stephen J.; Cowan, Benjamin; Dawson, Jay; Gai, Wei; Hommelhoff, Peter; Huang, Yen-Chieh; Jing, Chunguang; McGuinness, Christopher; Palmer, Robert B.; Naranjo, Brian; Rosenzweig, James; Travish, Gil; Mizrahi, Amit; Schachter, Levi; Sears, Christopher; Werner, Gregory R.; Yoder, Rodney B.

    2014-10-01

    The use of infrared lasers to power optical-scale lithographically fabricated particle accelerators is a developing area of research that has garnered increasing interest in recent years. The physics and technology of this approach is reviewed, which is referred to as dielectric laser acceleration (DLA). In the DLA scheme operating at typical laser pulse lengths of 0.1 to 1 ps, the laser damage fluences for robust dielectric materials correspond to peak surface electric fields in the GV /m regime. The corresponding accelerating field enhancement represents a potential reduction in active length of the accelerator between 1 and 2 orders of magnitude. Power sources for DLA-based accelerators (lasers) are less costly than microwave sources (klystrons) for equivalent average power levels due to wider availability and private sector investment. Because of the high laser-to-particle coupling efficiency, required pulse energies are consistent with tabletop microJoule class lasers. Combined with the very high (MHz) repetition rates these lasers can provide, the DLA approach appears promising for a variety of applications, including future high-energy physics colliders, compact light sources, and portable medical scanners and radiative therapy machines.

  18. Punching Shear Behavior of Continuous Bubbled Reinforced Reactive Powder Concrete Slab

    Directory of Open Access Journals (Sweden)

    Mohammad Redha K. Mahmood

    2017-03-01

    Full Text Available This paper presents an experimental investigation on punching shear behavior of continuous bubbled reinforced Reactive Powder Concrete (RPC slabs. Bubbled slab is one of the various types of voided slabs. It consists of bubbles placed inside a concrete slab which will reduce the self-weight of the structure by about 35% (Tina Lai 2009. On the other hand, using RPC make it possible for structural member to have smaller dimensions due to the great strength of this type of concrete. In this study, these two method to increase the building spaces dimensions by reducing self-weigh of the structure by using bubbled slabs and to decrease the structural members' dimensions by using RPC have been investigated together. To study the punching shear behavior of continuous bubbled flat slabs such as the ultimate load carrying capacity, central deflection and slabs crack pattern at the ultimate load, nine different types of slabs were tested. The parameters of the study were type of concrete (RPC and Normal Concrete (NC, bubbles diameter to slab thickness ratio (D/t of (0.6 and 0.7, bubbles location (at all slab area, started from distance D and 1.5D from the center slab and solid slab. The test results show that the crack pattern and ultimate load capacity as well as maximum deflection depends on all of the mentioned parameters, were by increasing (D/t ratio the ultimate load capacity increases about (6.49 and 9.58% for slabs with bubbles started at distance 2D and 3D, respectively. But in the slabs with bubbles at all slab area the ultimate load and the maximum deflection decreases about (6.63 and 9.47% and (7.96 and 6.84% for RPC and NC slabs, respectively. Also, the solid slab increases the ultimate load about (5.28% compare to bubbled slab at all area. It was found that by removing bubbles from center of the slab at distance 2D and 3D the ultimate load will increase about (14.72 and 8.76%, respectively for slabs with (D/t = 0.6 compare to slabs with

  19. Normal incidence filters using symmetry-protected modes in dielectric subwavelength gratings

    Science.gov (United States)

    Cui, Xuan; Tian, Hao; Du, Yan; Shi, Guang; Zhou, Zhongxiang

    2016-11-01

    We investigate narrowband transmission filters based on subwavelength-grating reflectors at normal incidence. Computational results show that the filtering is realized through symmetry-protected mode coupling. The guided mode resonances introduced by the slab layer allow flexible control of the filter frequencies. The quality factor of the filters could exceed 106. Dielectric gratings can be used over the entire range of electromagnetic waves, owing to their scale-invariant operations. Owing to the high refraction index and low index dispersion of semiconductors in the infrared range, these filters can be applied over a broad range from near infrared to terahertz frequencies.

  20. Numerical Methods for Analysis of Charged Vacancy Diffusion in Dielectric Solids

    Science.gov (United States)

    2006-12-01

    H. A.; Wilkes, J. O. Applied Numerical Methods ; Wiley: New York, 1969. Chapra , S. C.; Canale, R. P. Numerical Methods for Engineers with... Numerical Methods for Analysis of Charged Vacancy Diffusion in Dielectric Solids by John D. Clayton, Peter W. Chung, Michael A. Greenfield...Proving Ground, MD 21005-5066 ARL-TR-4002 December 2006 Numerical Methods for Analysis of Charged Vacancy Diffusion in Dielectric Solids

  1. Influence of dielectric microcavity on the spontaneous emission rate of atom: a perspective on the closed-orbit theory of photons

    Institute of Scientific and Technical Information of China (English)

    Shubao Wang; Xueyou Xu; Hongyun Li; Zhengmao Jia; Shenglu Lin

    2008-01-01

    The formulas of the quantum electrodynamics have been applied to calculate the spontaneous emission rate of excited atom in dielectric microcavity.The results exhibit damping oscillating Patterns which depend sensitively on the scaling parameter and geometrical structure.Compared with the case that the emitting atom is immersed in dielectric,the spontaneous emission rate is depressed obviously and the center or the mean value of the oscillations is intimately related to the real refractive index of the local position where the atom is.In order to explain this phenomenon,we utilize the closed-orbit theory to deal with the classical trajectories of the emitted photon.and extract the corresponding frequencies of the oscillations by Fourier transform.It is found that the oscillations can be represented in terms of the closed-orbits of the photon motion constrained in dielectric microcavity,thus providing another perspective on the spontaneous emission of atom sandwiched by dielectric slabs.

  2. Post-tensioned concrete floor slab design of a shopping centre

    Institute of Scientific and Technical Information of China (English)

    刘洋; 于霞

    2011-01-01

    Post-tensioned Concrete slab can provide large clear span, and also has better performance in crack control and deflection. The topic below introduced the design process of the post-tensioned floor slab of a shopping centre.

  3. Resolution Ability and Surface Bright Spots of a Lossy Left-handed Material Slab

    Institute of Scientific and Technical Information of China (English)

    LI Chao; LI Fang

    2006-01-01

    @@ The imaging quality of a lossy left-handed material (LHM) slab is studied. The exact solution is obtained for the interaction of a monochromatic source with a lossy LHM slab by Fourier integrals in wave number domain.

  4. Importance of bulk states for the electronic structure of semiconductor surfaces: implications for finite slabs.

    Science.gov (United States)

    Sagisaka, Keisuke; Nara, Jun; Bowler, David

    2017-04-12

    We investigate the influence of slab thickness on the electronic structure of the Si(1 0 0)- p([Formula: see text]) surface in density functional theory (DFT) calculations, considering both density of states and band structure. Our calculations, with slab thicknesses of up to 78 atomic layers, reveal that the slab thickness profoundly affects the surface band structure, particularly the dangling bond states of the silicon dimers near the Fermi level. We find that, to precisely reproduce the surface bands, the slab thickness needs to be large enough to completely converge the bulk bands in the slab. In the case of the Si(1 0 0) surface, the dispersion features of the surface bands, such as the band shape and width, converge when the slab thickness is larger than 30 layers. Complete convergence of both the surface and bulk bands in the slab is only achieved when the slab thickness is greater than 60 layers.

  5. Characterisation of multi-mode propagation in silicon nitride slab waveguides

    Science.gov (United States)

    Jennings, B. D.; McCloskey, D.; Gough, J. J.; Hoang, T.; Abadía, N.; Zhong, C.; Karademir, E.; Bradley, A. L.; Donegan, J. F.

    2017-01-01

    A simple experimental method for determining the number of modes in planar dielectric multi-mode waveguides, and the effective index difference of these modes, is presented. Applying a thin, dye-doped polymer cladding, the fluorescence excited by multiple modes propagating in a silicon nitride slab waveguide is imaged to extract information. Interference between the modes produces a structured intensity profile along the waveguide which is constant in time. The spatial frequencies of this intensity profile are directly linked to the propagation constants of the underlying modes. Through a discrete Fourier transform, the modes’ effective index differences are found and compare well with analytically calculated values. Furthermore, the amplitudes in the Fourier transform are directly related to the power in each mode. Comparing the amplitudes of the Fourier components as a function of propagation distance, an estimate of the propagation losses of the individual modes relative to one another is made. The method discussed could be applied to analysing mode behaviour in integrated photonic devices, most notably in mode-division multiplexing.

  6. Study of Power Coefficient and Insertion Phase Shift for Organic Magnetic Slab

    Directory of Open Access Journals (Sweden)

    Li Gao-sheng

    2012-09-01

    Full Text Available In this paper, theories of electromagnetic reflection and transmission as well as transmission line are adopted, a simulation method is designed to calculate power transmission coefficient and insertion phase shift, and also the mathematical formulas are deduced that the electromagnetic parameters of material used in radomes must be satisfied to remove the depolarization phenomenon, a single magnetic slab is used to discuss and verify the formulas. A special A sandwich radome, as a example, is calculated to analysis the effects of the magnetic and dielectric materials on the power transmission coefficient and the insertion phase shift. It is found that the phenomenon of depolarization can be avoided for A sandwich radome structure once when r r ε = μ (the relative complex permittivity of the magnetic material equals its relative complex permeability, and the power of transmission coefficient for magnetic material is better, the insertion phase shift is smoother, and the property of transmission performance is better than those of the electric material. Finally, the commercial software HFSS further verifies the correctness of the conclusions and validity of the method.

  7. Shear and anchorage behaviour of fire exposed hollow core slabs

    NARCIS (Netherlands)

    Fellinger, J.

    2005-01-01

    The fire resistance of hollow core slabs is currently assessed considering flexural failure only. However, fire tests show that shear or anchorage failure can also govern the load bearing behaviour. This paper is based on the dissertation by the author1 and discusses existing and new fire tests. It

  8. Excitonic Doppler-Rabi Oscillations in a Moving Organic Slab

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    It is theoretically shown that excitonic Doppler-Rabi oscillations can occur in an organic slab moving along the axis of a high-Q cavity. Due to the √N enhancement of the vacuum Rabi frequency, this effect can be more easily observed than that in a moving two-level atom.

  9. CFRP strengthened openings in two-way concrete slabs

    DEFF Research Database (Denmark)

    Enochsson, O.; Lundqvist, J.; Täljsten, Björn

    2006-01-01

    Rehabilitation and strengthening of concrete structures with externally bonded fibre reinforced polymers (FRPs) has been a viable technique for at least a decade. An interesting and useful application is strengthening of slabs or walls where openings are introduced. In these situations, FRP sheet...

  10. Some consequences of the subduction of young slabs

    NARCIS (Netherlands)

    England, P.; Wortel, R.

    The negative buoyancy force exerted by a subducting oceanic slab depends on its descent velocity, and strongly on its age. For lithosphere close to thermal equilibrium, this force dominates by a large margin the resisting forces arising from friction on the plate boundary and compositional buoyancy.

  11. Eigenvalues of collective emission in multi-slice slab configurations

    Energy Technology Data Exchange (ETDEWEB)

    Friedberg, Richard [Department of Physics, Columbia University, New York, NY 10027 (United States); Manassah, Jamal T. [HMS Consultants, Inc., PO Box 592, New York, NY 10028 (United States)], E-mail: jmanassah@gmail.com

    2008-06-02

    We compute the eigenmodes of collective emission from multi-slice slab configurations, using the transfer matrix formalism. We elucidate within this formalism the phenomena of 'Invisible Gaps' in multiple-slice configuration and of 'Precocious Superradiance' in periodic structures previously observed in numerical solutions of Maxwell-Bloch equations.

  12. Topological optical Bloch oscillations in a deformed slab waveguide.

    Science.gov (United States)

    Longhi, Stefano

    2007-09-15

    Spatial Bloch oscillations of light waves of purely topological origin are theoretically shown to exist in weakly deformed slab waveguides. As the optical rays trapped in the deformed waveguide can roll freely, wave diffraction is strongly affected by the topology of the deformed surface, which can be tailored to simulate the effect of a tilted periodic refractive index.

  13. Fire-exposed continuous span composite steel-concrete slabs

    NARCIS (Netherlands)

    Both, C.

    1996-01-01

    From experimental evidence, it was concluded that existing rules for the calculation of the behaviour of fire-exposed composite beams and slabs often lead to conservative solutions. Furthermore, the range of common applications had grown beyond the limits of existing calculation mies. It was feit

  14. Fire-exposed continuous span composite steel-concrete slabs

    NARCIS (Netherlands)

    Both, K.

    1996-01-01

    From experimental evidence, it was concluded that existing rules for the calculation of the behaviour of fire-exposed composite beams and slabs often lead to conservative solutions. Furthermore, the range of common applications had grown beyond the limits of existing calculation rules. It was felt

  15. Fire-exposed continuous span composite steel-concrete slabs

    NARCIS (Netherlands)

    Both, K.

    1996-01-01

    From experimental evidence, it was concluded that existing rules for the calculation of the behaviour of fire-exposed composite beams and slabs often lead to conservative solutions. Furthermore, the range of common applications had grown beyond the limits of existing calculation rules. It was felt t

  16. Study of global stability of tall buildings with prestressed slabs

    Directory of Open Access Journals (Sweden)

    L. A. Feitosa

    Full Text Available The use of prestressed concrete flat slabs in buildings has been increasing in recent years in the Brazilian market. Since the implementation of tall and slender buildings a trend in civil engineering and architecture fields, arises from the use of prestressed slabs a difficulty in ensuring the overall stability of a building without beams. In order to evaluate the efficiency of the main bracing systems used in this type of building, namely pillars in formed "U" in elevator shafts and stairs, and pillars in which the lengths are significantly larger than their widths, was elaborated a computational models of fictional buildings, which were processed and analyzed using the software CAD/TQS. From the variation of parameters such as: geometry of the pillars, thick slabs, characteristic strength of the concrete, reduceofthe coefficient of inertia for consideration of non-linearities of the physical elements, stiffness of the connections between slabs and pillars, among others, to analyze the influence of these variables on the overall stability of the building from the facing of instability parameter Gama Z, under Brazilian standard NBR 6118, in addition to performing the processing of building using the P-Delta iterative calculation method for the same purpose.

  17. Designing Meta Material Slabs Exhibiting Negative Refraction Using Topology Optimization

    DEFF Research Database (Denmark)

    Christiansen, Rasmus Ellebæk; Sigmund, O.

    2016-01-01

    This paper proposes a topology optimization based approach for designing meta materials exhibiting a desired negative refraction with high transmission at a given angle of incidence and frequency. The approach considers a finite slab of meta material consisting of axis-symmetric designable unit...

  18. Lower Bound Limit Analysis Of Slabs With Nonlinear Yield Criteria

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Damkilde, Lars

    2002-01-01

    A finite element formulation of the limit analysis of perfectly plastic slabs is given. An element with linear moment fields for which equilibrium is satisfied exactly is used in connection with an optimization algorithm taking into account the full nonlinearity of the yield criteria. Both load...

  19. An Analytical Study on Deflection and Stress Resultants of Composite Floor Slabs

    OpenAIRE

    山川, 哲雄; 郝, 洪濤; 田中, 躍一; Yamakawa, Tetsuo; Hao, Hongtao; Tanaka, Youichi

    1993-01-01

    The composite floor slab, which is composed of cast-in-place concrete and casting floor formworks, is assumed to be a double layered floor slab. This floor slab is proposed as ARC (Automation-oriented Reinforced Concrete Constructions) floor systems.Using the equivalent flexural rigidity for the double layered floor slabs consisting of two different elastic moduli, analytical solutions expressed in Fourier series by thin plate theory and by elementary beam theory can be easily applied to the ...

  20. Temperature dependence of band gap ratio and Q-factor defect mode in a semiconductor quaternary alloy hexagonal photonic-crystal hole slab

    Science.gov (United States)

    Sánchez-Cano, R.; Porras-Montenegro, N.

    2016-04-01

    We present numerical predictions for the photonic TE-like band gap ratio and the quality factors of symmetric localized defect as a function of the thickness slab and temperature by the use of plane wave expansion and the finite-difference time-domain methods. The photonic-crystal hole slab is composed of a 2D hexagonal array with identical air holes and a circular cross section, embedded in a non-dispersive III-V semiconductor quaternary alloy slab, which has a high value of dielectric function in the near-infrared region, and the symmetric defect is formed by increasing the radius of a single hole in the 2D hexagonal lattice. We show that the band gap ratio depends linearly on the temperature in the range 150-400 K. Our results show a strong temperature dependence of the quality factor Q, the maximum (Q = 7000) is reached at T = 350 hbox {K}, but if the temperature continues to increase, the efficiency drops sharply. Furthermore, we present numerical predictions for the electromagnetic field distribution at T = 350 hbox {K}.

  1. Slab melting and magma formation beneath the southern Cascade arc

    Science.gov (United States)

    Walowski, K. J.; Wallace, P. J.; Clynne, M. A.; Rasmussen, D. J.; Weis, D.

    2016-07-01

    The processes that drive magma formation beneath the Cascade arc and other warm-slab subduction zones have been debated because young oceanic crust is predicted to largely dehydrate beneath the forearc during subduction. In addition, geochemical variability along strike in the Cascades has led to contrasting interpretations about the role of volatiles in magma generation. Here, we focus on the Lassen segment of the Cascade arc, where previous work has demonstrated across-arc geochemical variations related to subduction enrichment, and H-isotope data suggest that H2O in basaltic magmas is derived from the final breakdown of chlorite in the mantle portion of the slab. We use naturally glassy, olivine-hosted melt inclusions (MI) from the tephra deposits of eight primitive (MgO > 7 wt%) basaltic cinder cones to quantify the pre-eruptive volatile contents of mantle-derived melts in this region. The melt inclusions have B concentrations and isotope ratios that are similar to mid-ocean ridge basalt (MORB), suggesting extensive dehydration of the downgoing plate prior to reaching sub-arc depths and little input of slab-derived B into the mantle wedge. However, correlations of volatile and trace element ratios (H2O/Ce, Cl/Nb, Sr/Nd) in the melt inclusions demonstrate that geochemical variability is the result of variable addition of a hydrous subduction component to the mantle wedge. Furthermore, correlations between subduction component tracers and radiogenic isotope ratios show that the subduction component has less radiogenic Sr and Pb than the Lassen sub-arc mantle, which can be explained by melting of subducted Gorda MORB beneath the arc. Agreement between pMELTS melting models and melt inclusion volatile, major, and trace element data suggests that hydrous slab melt addition to the mantle wedge can produce the range in primitive compositions erupted in the Lassen region. Our results provide further evidence that chlorite-derived fluids from the mantle portion of the

  2. Grounded cognition.

    Science.gov (United States)

    Barsalou, Lawrence W

    2008-01-01

    Grounded cognition rejects traditional views that cognition is computation on amodal symbols in a modular system, independent of the brain's modal systems for perception, action, and introspection. Instead, grounded cognition proposes that modal simulations, bodily states, and situated action underlie cognition. Accumulating behavioral and neural evidence supporting this view is reviewed from research on perception, memory, knowledge, language, thought, social cognition, and development. Theories of grounded cognition are also reviewed, as are origins of the area and common misperceptions of it. Theoretical, empirical, and methodological issues are raised whose future treatment is likely to affect the growth and impact of grounded cognition.

  3. Dielectric screening in semiconductors

    Science.gov (United States)

    Harrison, Walter A.; Klepeis, John E.

    1988-01-01

    Intra-atomic and interatomic Coulomb interactions are incorporated into bond-orbital theory, based upon universal tight-binding parameters, in order to treat the effects of charge redistribution in semiconductor bonds. The dielectric function ɛ(q) is obtained for wave numbers in a [100] direction. The screening of differences in average hybrid energy across a heterojunction is calculated in detail, indicating that the decay length for the potential depends upon the relative values of Madelung and intra-atomic Coulomb terms. The parameters used here predict an imaginary decay length and thus an oscillating potential near the interface. The same theory is applied to point defects by imbedding a cluster in a matrix lattice, taking charges in that lattice to be consistent with continuum theory. Illustrating the theory with a phosphorus impurity in silicon, it is seen that the impurity and its neighboring atoms have charges on the order of only one-tenth of an electronic charge, alternating in sign from neighbor to neighbor as for planar defects. Although there are shifts in the term values on the order of a volt, the difference in these shifts for neighboring atoms is much smaller so that the effect on the bonds is quite small. This behavior is analogous to the response of a dielectric continuum to a point charge: The medium is locally neutral except at the center of the cluster and there are slowly varying potentials e2/ɛr. Because of this slow variation, free-atom term values should ordinarily suffice for the calculation of bond properties and bond lengths at impurities. Corrections are larger for homovalent substitutions such as carbon in silicon.

  4. All-dielectric perforated metamaterials with toroidal dipolar response (Conference Presentation)

    Science.gov (United States)

    Stenishchev, Ivan; Basharin, Alexey A.

    2017-05-01

    We present metamaterials based on dielectric slab with perforated identical cylindrical clusters with perforated holes, which allow to support the toroidal dipolar response due to Mie-resonances in each hole. Note that proposed metamaterial is technologically simple for fabrication in optical frequency range. Metamaterial can be fabricated by several methods. For instance, we may apply the molecular beam epitaxy method for deposition of Si or GaAs layers, which have permittivity close to 16. Next step, nanometer/micrometer holes are perforated by focused ion beam method or laser cutting method. Fundamental difference of proposed metamaterial is technological fabrication process. Classically all- dielectric optical metamaterials consist of nano-spheres or nano-discs, which are complicated for fabrication, while our idea and suggested metamaterials are promising prototype of various optical/THz all-dielectic devices as sensor, nano-antennas elements for nanophotonics.

  5. Dielectric Coating Thermal Stabilization During GaAs-Based Laser Fabrication for Improved Device Yield

    Science.gov (United States)

    Connors, Michael K.; Millsapp, Jamal E.; Turner, George W.

    2016-06-01

    The quality and yield of GaAs-based ridge waveguide devices fabricated at MIT Lincoln Laboratory were negatively impacted by the random lot-to-lot appearance of blisters in the front-side contact metal. The blisters signaled compromised adhesion between the front-side contact metal, underlying SiO2 dielectric coating, and semiconductor surface. A thermal-anneal procedure developed for the fabrication of GaAs slab coupled optical waveguide (SCOW) ridge waveguide devices stabilizes the SiO2 dielectric coating by means of outgassing and stress reduction. This process eliminates a primary source of adhesion loss, as well as blister generation, and thereby significantly improves device yield. Stoney's equation was used to analyze stress-induced bow in device wafers fabricated using this stabilization procedure. This analysis suggests that changes in wafer bow contribute to the incidence of metal blisters in SCOW devices.

  6. Influence of concrete slabs on lateral torsional buckling of steel beams

    NARCIS (Netherlands)

    Maljaars, J.; Snijder, H.H.; Hoenderkamp, J.C.D.

    2007-01-01

    The use of pre-cast concrete floor slabs in steel framed structures is quite common. In the de-sign of the steel beams, the lateral restraining effect of the pre-cast concrete slab is normally safely neglected. However, the concrete slab will provide some horizontal restraint, even without special p

  7. High-power diode-pumped Tm:YLF slab laser

    CSIR Research Space (South Africa)

    Schellhorn, M

    2009-06-01

    Full Text Available The aim is to develop a high-power Tm:YLF slab laser which can be utilized to pump a Ho slab laser. A 68 W Tm:YLF slab laser was recently presented in [1] pumped from one end by a single 6-bar stack delivering ~300 W of pump power. In this work, we...

  8. Tunable dielectric properties of ferrite-dielectric based metamaterial.

    Directory of Open Access Journals (Sweden)

    K Bi

    Full Text Available A ferrite-dielectric metamaterial composed of dielectric and ferrite cuboids has been investigated by experiments and simulations. By interacting with the electromagnetic wave, the Mie resonance can take place in the dielectric cuboids and the ferromagnetic precession will appear in the ferrite cuboids. The magnetic field distributions show the electric Mie resonance of the dielectric cuboids can be influenced by the ferromagnetic precession of ferrite cuboids when a certain magnetic field is applied. The effective permittivity of the metamaterial can be tuned by modifying the applied magnetic field. A good agreement between experimental and simulated results is demonstrated, which confirms that these metamaterials can be used for tunable microwave devices.

  9. Slab melting and magma generation beneath the southern Cascade Arc

    Science.gov (United States)

    Walowski, K. J.; Wallace, P. J.; Clynne, M. A.

    2014-12-01

    Magma formation in subduction zones is interpreted to be caused by flux melting of the mantle wedge by fluids derived from dehydration of the downgoing oceanic lithosphere. In the Cascade Arc and other hot-slab subduction zones, however, most dehydration reactions occur beneath the forearc, necessitating a closer investigation of magma generation processes in this setting. Recent work combining 2-D steady state thermal models and the hydrogen isotope composition of olivine-hosted melt inclusions from the Lassen segment of the Cascades (Walowski et al., 2014; in review) has shown that partial melting of the subducted basaltic crust may be a key part of the subduction component in hot arcs. In this model, fluids from the slab interior (hydrated upper mantle) rise through the slab and cause flux-melting of the already dehydrated MORB volcanics in the upper oceanic crust. In the Shasta and Lassen segments of the southern Cascades, support for this interpretation comes from primitive magmas that have MORB-like Sr isotope compositions that correlate with subduction component tracers (H2O/Ce, Sr/P) (Grove et al. 2002, Borg et al. 2002). In addition, mass balance calculations of the composition of subduction components show ratios of trace elements to H2O that are at the high end of the global arc array (Ruscitto et al. 2012), consistent with the role of a slab-derived melt. Melting of the subducted basaltic crust should contribute a hydrous dacitic or rhyolitic melt (e.g. Jego and Dasgupta, 2013) to the mantle wedge rather than an H2O-rich aqueous fluid. We are using pHMELTS and pMELTS to model the reaction of hydrous slab melts with mantle peridotite as the melts rise through the inverted thermal gradient in the mantle wedge. The results of the modeling will be useful for understanding magma generation processes in arcs that are associated with subduction of relatively young oceanic lithosphere.

  10. Towards all-dielectric metamaterials and nanophotonics

    CERN Document Server

    Krasnok, Alexander; Petrov, Mikhail; Savelev, Roman; Belov, Pavel; Kivshar, Yuri

    2015-01-01

    We review a new, rapidly developing field of all-dielectric nanophotonics which allows to control both magnetic and electric response of structured matter by engineering the Mie resonances in high-index dielectric nanoparticles. We discuss optical properties of such dielectric nanoparticles, methods of their fabrication, and also recent advances in all-dielectric metadevices including couple-resonator dielectric waveguides, nanoantennas, and metasurfaces.

  11. Dielectric inspection of erythrocyte morphology

    Science.gov (United States)

    Hayashi, Yoshihito; Oshige, Ikuya; Katsumoto, Yoichi; Omori, Shinji; Yasuda, Akio; Asami, Koji

    2008-05-01

    We performed a systematic study of the sensitivity of dielectric spectroscopy to erythrocyte morphology. Namely, rabbit erythrocytes of four different shapes were prepared by precisely controlling the pH of the suspending medium, and their complex permittivities over the frequency range from 0.1 to 110 MHz were measured and analyzed. Their quantitative analysis shows that the characteristic frequency and the broadening parameter of the dielectric relaxation of interfacial polarization are highly specific to the erythrocyte shape, while they are insensitive to the cell volume fraction. Therefore, these two dielectric parameters can be used to differentiate erythrocytes of different shapes, if dielectric spectroscopy is applied to flow-cytometric inspection of single blood cells. In addition, we revealed the applicability and limitations of the analytical theory of interfacial polarization to explain the experimental permittivities of non-spherical erythrocytes.

  12. Electromagnetic identification of dielectric materials

    Directory of Open Access Journals (Sweden)

    A. F. Yanenko

    2010-05-01

    Full Text Available The electromagnetic features and parameters of dielectric materials, which are used in light industry and stomatology. The results of measuring are analyzed and the method of authentication is offered.

  13. Dielectric Spectroscopy in Biomaterials: Agrophysics

    Directory of Open Access Journals (Sweden)

    Dalia El Khaled

    2016-04-01

    Full Text Available Being dependent on temperature and frequency, dielectric properties are related to various types of food. Predicting multiple physical characteristics of agri-food products has been the main objective of non-destructive assessment possibilities executed in many studies on horticultural products and food materials. This review manipulates the basic fundamentals of dielectric properties with their concepts and principles. The different factors affecting the behavior of dielectric properties have been dissected, and applications executed on different products seeking the characterization of a diversity of chemical and physical properties are all pointed out and referenced with their conclusions. Throughout the review, a detailed description of the various adopted measurement techniques and the mostly popular equipment are presented. This compiled review serves in coming out with an updated reference for the dielectric properties of spectroscopy that are applied in the agrophysics field.

  14. Bound Modes in Dielectric Microcavities

    CERN Document Server

    Visser, P M; Lenstra, D

    2002-01-01

    We demonstrate how exactly bound cavity modes can be realized in dielectric structures other than 3d photonic crystals. For a microcavity consisting of crossed anisotropic layers, we derive the cavity resonance frequencies, and spontaneous emission rates. For a dielectric structure with dissipative loss and central layer with gain, the beta factor of direct spontaneous emission into a cavity mode and the laser threshold is calculated.

  15. TESTS ON STRUCTURALLY DEFICIENT RC SLABS STRENGTHENED WITH FIBRE REINFORCED POLYMER (FRP) COMPOSITES

    Institute of Scientific and Technical Information of China (English)

    S.T. Smith; S.J. Kim

    2004-01-01

    This paper reports the results of a series of tests on fibre reinforced polymer (FRP) strengthened reinforced concrete (RC) slabs, which were recently undertaken at the University of Technology,Sydney. The slabs were reinforced with high-strength low-ductile steel reinforcement and strengthened with either carbon FRP (CFRP) or glass FRP (GFRP) composites. The unstrengthened control slabs failed by fracture of the steel tension reinforcement while the FRP strengthened slabs failed by debonding of the FRP followed by rupture of the tension steel. The FRP-strengthened slabs were stronger than their unstrengthened counterparts and displayed considerable ductility.

  16. An investigation on the behaviour and stiffness of reinforced concrete slabs subjected to torsion

    Science.gov (United States)

    Nguyen, M. C. T.; Pham, P. T.

    2017-01-01

    This paper presents an investigation on RC slab under torsion, by both experiment and finite element analysis. The torsion tests were done on three similar square RC slabs with dimensions of 1900×1900×150 mm. The behaviour of slabs at pre-cracking and post-cracking of concrete phases were investigated, via Load-displacement, twisting moment-curvature relationships, and torsional stiffness of slabs. The experimental results are compared with the FEA and the results in literatures. The torsional stiffness of slab at the phase of concrete cracked and steel yield is about 1/25 of the stiffness at the pre-cracking phase.

  17. Enhanced bandgap in annular photonic-crystal silicon-on-insulator asymmetric slabs.

    Science.gov (United States)

    Hou, Jin; Citrin, D S; Wu, Huaming; Gao, Dingshan; Zhou, Zhiping

    2011-06-15

    Photonic band structures of annular photonic-crystal (APC) silicon-on-insulator (SOI) asymmetric slabs with finite thickness were investigated by the three-dimensional plane-wave expansion method. The results show that for a broad range of air-volume filling factors, APC slabs can exhibit a significantly larger bandgap than conventional circular-hole photonic-crystal (PC) slabs. Bandgap enhancements over conventional air hole PC SOI slabs as large as twofold are predicted for low air-volume filling factors below 15%. This desirable behavior suggests a potential for APC SOI slabs to serve as the basis of various optical cavities, waveguides, and mirrors.

  18. Electromagnetic resonant properties of metal-dielectric-metal (MDM) cylindrical microcavities

    Science.gov (United States)

    Heng, Hang; Wang, Rong

    2017-01-01

    Optical metamaterials can concentrate light into extremely tiny volumes to enhance their interaction with quantum objects. In this paper, a cylindrical microcavity based on the Au-dielectric-Au sandwiched structure is proposed. Numerical study shows that the cylindrical microcavity has the strong ability of localizing light and confining 103- 104-fold enhancement of the electromagnetic energy density, which contains the most energy of the incoming light. The enhancement factor of energy density G inside the cavity shows the regularities as the change in the thickness of the dielectric slab, dielectric constant, and the radius of gold disk. At the normal incidence of electromagnetic radiation, the obtained reflection spectra operate in the range from 4.8 μm to 6 μm and with the absorption efficiency C (C=1-R min), which can reach 99% by optimizing the structure's geometry parameters, and the dielectric constant. Due to the symmetry of the cylindrical microcavities, this structure is insensitive to the polarization of the incident wave. The proposed optical metamaterials will have potential applications in the surface enhanced spectroscopy, new plasmonic detectors, bio-sensing, solar cells, etc.

  19. Analysis of the Behaviour of Composite Steel and Steel Fiber Reinforced Concrete Slabs

    Directory of Open Access Journals (Sweden)

    Mindaugas Petkevičius

    2011-04-01

    Full Text Available There was a pending influence of steel fiber on the strength and stiffness of composite steel–concrete slabs under statical short–time load. Steel profiled sheeting and steel fiber reinforced concrete were used for specimens. Four composite slabs were made. Experimental investigations into the behaviour and influence of steel fiber reinforced concrete in composite slabs were conducted. Transverse, longitudinal, shear deformation and deflection of the slab were measured. The results indicated that the use of steel fiber in composite slabs was effective: strength was 20–24 % higher and the meanings of deflections under the action of the bending moment were 0,6MR (where MR is the bending moment at failure of the slabs and were 16–18 % lower for slabs with usual concrete. Article in Lithuanian

  20. Investigation of Effect of Slab Opening Location to the Shear Stress

    Directory of Open Access Journals (Sweden)

    Burak Yön

    2010-01-01

    Full Text Available In this study, it is investigated the effect of slab opening location in reinforced concrete building to the structural behavior. For investigation of slab irregularity, three multi storey irregular structures that have different slab opening locations in structure plans and one regular structure are designed. Linear dynamic analyses are performed for the structure models using Time History Analysis method. 13 March 1992 Erzincan Earthquake acceleration records are used for these analyses. It is assumed that slabs of selected structures are modeled as elastic diaphragm. SAP2000 Structural Analysis Program is used in the analyses. Values of slab that near space shear stress obtained from dynamic analyses of selected structures are comparatively evaluated. According to analyses results, it is determined that location of slab opening of structures reasonably both affects the behavior of structures and occurs great slab shear stress.

  1. Dielectric optical invisibility cloaks

    Science.gov (United States)

    Blair, J.; Tamma, V. A.; Park, W.; Summers, C. J.

    2010-08-01

    Recently, metamaterial cloaks for the microwave frequency range have been designed using transformative optics design techniques and experimentally demonstrated. The design of these structures requires extreme values of permittivity and permeability within the device, which has been accomplished by the use of resonating metal elements. However, these elements severely limit the operating frequency range of the cloak due to their non-ideal dispersion properties at optical frequencies. In this paper we present designs to implement a simpler demonstration of cloaking, the carpet cloak, in which a curved reflective surface is compressed into a flat reflective surface, effectively shielding objects behind the curve from view with respect to the incoming radiation source. This approach eliminates the need for metallic resonant elements. These structures can now be fabricated using only high index dielectric materials by the use of electron beam lithography and standard cleanroom technologies. The design method, simulation analysis, device fabrication, and near field optical microscopy (NSOM) characterization results are presented for devices designed to operate in the 1400-1600nm wavelength range. Improvements to device performance by the deposition/infiltration of linear, and potentially non-linear optical materials, were investigated.

  2. Dielectric Covered Planar Antennas

    Science.gov (United States)

    Llombart Juan, Nuria (Inventor); Lee, Choonsup (Inventor); Chattopadhyay, Goutam (Inventor); Gill, John J. (Inventor); Skalare, Anders J. (Inventor); Siegel, Peter H. (Inventor)

    2014-01-01

    An antenna element suitable for integrated arrays at terahertz frequencies is disclosed. The antenna element comprises an extended spherical (e.g. hemispherical) semiconductor lens, e.g. silicon, antenna fed by a leaky wave waveguide feed. The extended spherical lens comprises a substantially spherical lens adjacent a substantially planar lens extension. A couple of TE/TM leaky wave modes are excited in a resonant cavity formed between a ground plane and the substantially planar lens extension by a waveguide block coupled to the ground plane. Due to these modes, the primary feed radiates inside the lens with a directive pattern that illuminates a small sector of the lens. The antenna structure is compatible with known semiconductor fabrication technology and enables production of large format imaging arrays.

  3. Flexural Behavior of Continuous Bubbled Reinforced Reactive Powder Concrete Flat Slab

    Directory of Open Access Journals (Sweden)

    Mohammad Redha K. Mahmood

    2017-05-01

    Full Text Available This paper presents an experimental investigation on flexural behavior of continuous bubbled reinforced Reactive Powder Concrete (RPC flat slabs. Bubbled slab is one of the various types of voided slabs. It consist of bubbles placed inside a concrete slab which will reduce the self-weight of the structure by about 35% (Tina Lai 2009. On the other hand, using RPC make it possible for structural member to have smaller dimensions due to the great strength of this type of concrete. In this study these two method are used to increase the building spaces dimensions by reducing self-weigh of the structure by using bubbled slabs and to decrease the structural members' dimensions by using RPC have been investigated together. To study the flexural behavior of continuous bubbled flat slabs such as the ultimate load carrying capacity, central deflection and slabs crack pattern at the ultimate load, seven types of slabs were tested. The parameters of the study were type of concrete (RPC and Normal Concrete (NC, bubbles diameter to slab thickness ratio (D/t of (0.6 and 0.7, type of loading (distributed and line load and solid slab. The test results show that the crack pattern and ultimate load capacity as well as maximum deflection depends on all of the mentioned parameters, were by increasing (D/t ratio the ultimate load capacity increases about (7.36%, 5.46% and 16.52% for RPC slabs under distributed load, line load and NC slabs, respectively. The solid slab increases the ultimate load about (4.05% compare to bubbled slab. Also, the line load decreases the ultimate load compare to distributed load by (3.45-5.16% for different (D/t ratio, and using the NC also decreases the ultimate load compare to RPC by (48-52.13% for different (D/t ratio

  4. Slab2 - Providing updated subduction zone geometries and modeling tools to the community

    Science.gov (United States)

    Hayes, G. P.; Hearne, M. G.; Portner, D. E.; Borjas, C.; Moore, G.; Flamme, H.

    2015-12-01

    The U.S. Geological Survey database of global subduction zone geometries (Slab1.0) combines a variety of geophysical data sets (earthquake hypocenters, moment tensors, active source seismic survey images of the shallow subduction zone, bathymetry, trench locations, and sediment thickness information) to image the shape of subducting slabs in three dimensions, at approximately 85% of the world's convergent margins. The database is used extensively for a variety of purposes, from earthquake source imaging, to magnetotelluric modeling. Gaps in Slab1.0 exist where input data are sparse and/or where slabs are geometrically complex (and difficult to image with an automated approach). Slab1.0 also does not include information on the uncertainty in the modeled geometrical parameters, or the input data used to image them, and provides no means to reproduce the models it described. Currently underway, Slab2 will update and replace Slab1.0 by: (1) extending modeled slab geometries to all global subduction zones; (2) incorporating regional data sets that may describe slab geometry in finer detail than do previously used teleseismic data; (3) providing information on the uncertainties in each modeled slab surface; (4) modifying our modeling approach to a fully-three dimensional data interpolation, rather than following the 2-D to 3-D steps of Slab1.0; (5) migrating the slab modeling code base to a more universally distributable language, Python; and (6) providing the code base and input data we use to create our models, such that the community can both reproduce the slab geometries, and add their own data sets to ours to further improve upon those models in the future. In this presentation we describe our vision for Slab2, and the first results of this modeling process.

  5. Dynamics of Mantle Circulation Associated with Slab Window Formation: Insights from 3D Laboratory Models

    Science.gov (United States)

    Guillaume, B.; Funiciello, F.; Moroni, M.; Faccenna, C.; Martinod, J.

    2009-12-01

    Slab window can form either by the intersection of a spreading ridge with a subduction zone or because of internal deformation of the slab that leads to its disruption. The main consequences of this phenomenon are the modifications of the physical, chemical and thermal conditions in the backarc mantle that in turn affect the tectonic and magmatic evolution of the overriding plate. We performed laboratory models of a two-layer linear viscous slab (silicone putty)-upper mantle (glucose syrup) system to quantitatively investigate the pattern of mantle circulation within the slab window (using Feature Tracking image analysis technique) and its influence on the kinematics of the system. Two different geometries have been tested considering a window located (a) at slab edges or (b) within the slab. Kinematic consequences of slab window have been explored to understand the dynamics of the mantle-slab interaction. Configuration (a) implies a reduction of the slab width (W) during subduction and is characterized by toroidal fluxes around the slab edges. The abrupt opening of lateral slab windows produces an acceleration of the trench retreat and subduction velocity, such as 40% for a three-fold width reduction. We interpret this behavior as mostly due to the decrease in the toroidal flow inside subduction windows, scaling with W2. Configuration (b) has been designed to explore the pattern of mantle flow within the window in the case of a laterally constrained subduction system. Slab window, which had a width (Ww) fixed to 15 % of the slab width, opened in the trench-perpendicular direction. It produced the formation of two toroidal mantle cells, centered on the slab midpoint and laterally growing as the slab window enlarged. Particles extruded through the slab window did not mix with particles located in the mantle wedge, the boundary between both reaching distances from the trench up to 3×Ww in the trench-perpendicular direction, and up to 1.5×Ww from the window edge in

  6. Ground Wars

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Kleis

    Political campaigns today are won or lost in the so-called ground war--the strategic deployment of teams of staffers, volunteers, and paid part-timers who work the phones and canvass block by block, house by house, voter by voter. Ground Wars provides an in-depth ethnographic portrait of two...... infrastructures that utilize large databases with detailed individual-level information for targeting voters, and armies of dedicated volunteers and paid part-timers. Nielsen challenges the notion that political communication in America must be tightly scripted, controlled, and conducted by a select coterie...... of professionals. Yet he also quashes the romantic idea that canvassing is a purer form of grassroots politics. In today's political ground wars, Nielsen demonstrates, even the most ordinary-seeming volunteer knocking at your door is backed up by high-tech targeting technologies and party expertise. Ground Wars...

  7. Optimal Material Layout - Applied on Reinforced Concrete Slabs

    DEFF Research Database (Denmark)

    Dollerup, Niels; Jepsen, Michael S.; Damkilde, Lars

    2015-01-01

    to determine the optimal material layout of a slab in the ultimate load state, based on simple inputs such as outer geometry, boundary conditions, multiple load cases and design domains. The material layout of the optimal design can either be fully orthotropic or isotropic, or a combination with a predefined......This paper introduces a general, finite-element-based optimisation tool for improving the material layout of concrete structures. The application presented is general and exemplified by material optimisation of reinforced concrete slabs. By utilising the optimisation tool, it is possible...... coupling between design domains and reinforcement directions. The implementation is a lower bound formulation, resulting in a convex optimisation problem that consists of a number of linear constraints from the equilibrium equations and a number of convex non-linear constraints from the yield criteria...

  8. Designing Meta Material Slabs Exhibiting Negative Refraction Using Topology Optimization

    DEFF Research Database (Denmark)

    Christiansen, Rasmus Ellebæk; Sigmund, O.

    2016-01-01

    This paper proposes a topology optimization based approach for designing meta materials exhibiting a desired negative refraction with high transmission at a given angle of incidence and frequency. The approach considers a finite slab of meta material consisting of axis-symmetric designable unit...... cells subjected to an exterior field. The unit cell is designed to achieve the desired properties based on tailoring the response of the meta material slab underthe exterior field. The approach is directly applicable to physical problems modeled by the Helmholtz equation, such as acoustic, elastic...... and electromagnetic wave problems. Acoustic meta materials with unit cell size on the order of half the wave length are considered as examples. Optimized designs are presented and their performance under varying frequency and angle of incidence is investigated....

  9. Characteristics of shell thickness in a slab continuous casting mold

    Institute of Scientific and Technical Information of China (English)

    Di-feng Wu; Shu-sen Cheng; Zi-jian Cheng

    2009-01-01

    The key to reduce shell breakout in the continuous casting process is to control shell thickness in the mold.A numerical simulation on the turbulent flow and heat transfer coupled with solidification in the slab mold using the volume of fluid (VOF) model and the enthalpy-porosity scheme was conducted and the emphasis was put upon the flow effect on the shell thickness profiles in longitudinal and transverse directions.The results show that the jet acts a stronger impingement on the shell of narrow face,which causes a zero-increase of shell thickness in a certain range near the impingement point.The thinnest shell on the slab cross-section locates primarily in the center of the narrow face,and secondly near the comer of the wide face.Nozzle optimization can obviously increase the shell thickness and make it more uniform.

  10. Oscillating Casimir force between two slabs in a Fermi sea

    DEFF Research Database (Denmark)

    Li-Wei, Chen; Guo-Zhen, Su; Jin-Can, Chen

    2012-01-01

    The Casimir effect for two parallel slabs immersed in an ideal Fermi sea is investigated at both zero and nonzero temperatures. It is found that the Casimir effect in a Fermi gas is distinctly different from that in an electromagnetic field or a massive Bose gas. In contrast to the familiar result...... that the Casimir force decreases monotonically with the increase of the separation L between two slabs in an electromagnetic field and a massive Bose gas, the Casimir force in a Fermi gas oscillates as a function of L. The Casimir force can be either attractive or repulsive, depending sensitively on the magnitude...... of L. In addition, it is found that the amplitude of the Casimir force in a Fermi gas decreases with the increase of the temperature, which also is contrary to the case in a Bose gas, since the bosonic Casimir force increases linearly with the increase of the temperature in the region T

  11. Non-Fourier heat conduction in an exponentially graded slab

    Science.gov (United States)

    Raveshi, M. R.

    2016-03-01

    The present article investigates one-dimensional non-Fourier heat conduction in a functionally graded material by using the differential transformation method. The studied geometry is a finite functionally graded slab, which is initially at a uniform temperature and suddenly experiences a temperature rise at one side, while the other side is kept insulated. A general non-Fourier heat transfer equation related to the functionally graded slab is derived. The problem is solved in the Laplace domain analytically, and the final results in the time domain are obtained by using numerical inversion of the Laplace transform. The obtained results are compared with the exact solution to verify the accuracy of the proposed method, which shows excellent agreement.

  12. Bolometric detection of ferromagnetic resonance in YIG slab

    Science.gov (United States)

    Tu, Sa; Białek, Marcin; Zhang, Youguang; Zhao, Weisheng; Yu, Haiming; Ansermet, Jean-Philippe

    2017-10-01

    The resistance of the Pt bar deposited on the YIG slab was monitored while the magnetic field was ramped through the ferromagnetic resonance with the YIG slab facing a coplanar waveguide resonator excited at 4.3 GHz excitation. The resistance change provides detection of the ferromagnetic resonance with a high signal-to-noise ratio. It is ascribed to a change in the temperature of the Pt bars. The thermal origin of the signal is confirmed by the observation that the signal vanishes when field modulation is applied at frequencies above 6 Hz. The spin pumping effect was vanishingly small, and the anisotropic magnetoresistance of the Pt bar, though quite easily observed, would imply a rectification voltage that is much smaller than the bolometric effect.

  13. Laplace-Fourier analysis and instabilities of a gainy slab

    CERN Document Server

    Hågenvik, Hans Olaf

    2015-01-01

    The idealization of monochromatic plane waves leads to considerable simplifications in the analysis of electromagnetic systems. However, for active systems this idealization may be dangerous due to the presence of growing waves. Here we consider a gainy slab, and use a realistic incident beam, which is both causal and has finite width. This clarifies some apparent paradoxes arising from earlier analyses of this setup. In general it turns out to be necessary to involve complex frequencies $\\omega$ and/or complex transversal wavenumbers $k_x$. Simultaneously real $\\omega$ and $k_x$ cannot describe amplified waves in a slab which is infinite in the transversal direction. We also show that the only possibility to have an absolute instability for a finite width beam, is if a normally incident plane wave would experience an instability.

  14. Negotiating Multicollinearity with Spike-and-Slab Priors.

    Science.gov (United States)

    Ročková, Veronika; George, Edward I

    2014-08-01

    In multiple regression under the normal linear model, the presence of multicollinearity is well known to lead to unreliable and unstable maximum likelihood estimates. This can be particularly troublesome for the problem of variable selection where it becomes more difficult to distinguish between subset models. Here we show how adding a spike-and-slab prior mitigates this difficulty by filtering the likelihood surface into a posterior distribution that allocates the relevant likelihood information to each of the subset model modes. For identification of promising high posterior models in this setting, we consider three EM algorithms, the fast closed form EMVS version of Rockova and George (2014) and two new versions designed for variants of the spike-and-slab formulation. For a multimodal posterior under multicollinearity, we compare the regions of convergence of these three algorithms. Deterministic annealing versions of the EMVS algorithm are seen to substantially mitigate this multimodality. A single simple running example is used for illustration throughout.

  15. Factors affecting the deterioration of concrete pavement slabs

    Directory of Open Access Journals (Sweden)

    N.M. Morozov

    2015-11-01

    Full Text Available The behavior of constructions under actual operating conditions is affected by exposure to the environment. It is important that concrete roads and airport pavings are resistant not only to mechanical damage, but also to the effects of alternate freezing and thawing. The causes of early failure in concrete have been shown using prefabricated road slabs as an example. The causes of loss of performance properties of the roadway have been established, which are primarily dependent on the quality of raw materials in the concrete. It was found that, aside from durability, uniformity and porosity are important factors in determining the frost resistance of concrete roadways. It was shown that high aluminate content in the cement leads to concrete destruction in the first year of structure use. The results may also indirectly indicate a violation of forming technology during slab production.

  16. Electromagnetic wave propagation through a slab of a dispersive medium

    CERN Document Server

    Ismail, Mohamed

    2016-01-01

    A method is proposed for the analysis of the propagation of electromagnetic waves through a homogeneous slab of a medium with Drude-Lorentz dispersion behavior, and excited by a causal sinusoidal source. An expression of the time dependent field, free from branch-cuts in the plane of complex frequencies, is established. This method provides the complete temporal response in both the steady-state and transient regimes in terms of discrete poles contributions. The Sommerfeld and Brillouin precursors are retrieved and the corresponding set of poles are identified. In addition, the contribution in the transient field of the resonance frequency in the Drude-Lorentz model is exhybited, and the effect of reflections resulting from the refractive index mismatch at the interfaces of the slab are analyzed.

  17. Effect of dielectric medium on the nonclassical properties of nonlinear sphere coherent states

    Directory of Open Access Journals (Sweden)

    E Amooghorban

    2014-04-01

    Full Text Available In order to investigate the effect of a medium with dissipation and dispersion and also the curvature of the physical space on the properties of the incident quantum states, we use the quantization of electromagnetic field based on phenomenological approach to obtain input-output relations between radiations on both sides of dielectric slab. By using these relations the fidelity, the Wigner function, and also the quantum correlation of the outgoing state through dielectric slab are obtained for a situation in which the rightward incident state is a nonlinear coherent state on a sphere and the leftward incident state is a vacuum state. Here, the incident states are considered monochromatic and the modeling of the medium is given by the Lorentz' model. Accordingly, we study nonclassical properties of the output states such as the quantum entanglement. It will be observed that the nonclassical properties of the outgoing states depend strongly on the optical property of the medium and also on the curvature of the physical state.

  18. Dichromatic nonlinear eigenmodes in slab waveguide with chi(2) nonlinearity.

    Science.gov (United States)

    Darmanyan, S A; Nevière, M

    2001-03-01

    The existence of purely nonlinear eigenmodes in a waveguiding structure composed of a slab with quadratic nonlinearity surrounded by (non)linear claddings is reported. Modes having bright and dark solitonlike shapes and consisting of two mutually locked harmonics are identified. Asymmetrical modes are shown to exist in symmetrical environments. Constraints for the existence of the modes are derived in terms of parameters of guiding structure materials.

  19. Transverse Mode Formation in Longitudinally Pumped Miniature Slab Lasers

    Institute of Scientific and Technical Information of China (English)

    XU Jian-Qiu; YE Xin; FANG Tao

    2006-01-01

    The formation of transverse modes in longitudinally pumped miniature slab lasers is investigated theoretically and experimentally. The longitudinally non-uniform gain-guiding is studied by expanding the electric field into the Hermite-Gaussian functions that satisfy boundary conditions of the resonator. Non-Gaussian transversal beam profiles in the near field are found and the beam diameter is reduced when the pump spot becomes smaller. The experimental observation agrees with the theoretical calculation.

  20. End-Pumped Tm:YAG Ceramic Slab Lasers

    Institute of Scientific and Technical Information of China (English)

    CHENG Xiao-Jin; XU Jian-Qiu; ZHANG Wen-Xin; JIANG Sen-Xue; PAN Yu-Bai

    2009-01-01

    Lasers from a Tm:YAG ceramic aare reported for the first time to our best knowledge. The Tm:YAG ceramic slab is end-pumped by a laser diode with central wavelength 792nm. At room temperature, the maximum continuous-wave output power is 4.5 W, and the sloping efficiency is obtained to be 20.5%. The laser spectrum of the Tm: YAG ceramic is centered at 2015 nm.

  1. Beam splitting by a plane-parallel absorptive slab.

    Science.gov (United States)

    Halevi, P

    1982-10-01

    A study of the transmission of inhomogeneous electromagnetic waves through an interface between a transparent and an absorbing medium leads to the prediction of a novel effect. A beam of unpolarized light passing through a dissipative plane-parallel slab splits into two parallel beams. The electric field in one beam is perpendicular to the plane of incidence, whereas in the other beam it is parallel to this plane.

  2. Oscillation modes and transmission into a Fibonacci slab

    Science.gov (United States)

    Castro-Arce, Lamberto; Molinar-Tabares, Martin; Campos-Garcia, Julio; Figueroa-Navarro, Carlos; Isasi-Siqueiros, Leonardo; Manzanares-Martinez, Betsabe

    In our contribution we developed a study on the behavior of the transmission modes and a Pt / Zn slab of a Fibonacci array of longitudinal and transverse acoustic waves. We have worked with arrangements from n = 1 to10 and has managed to find the energy bands and transmission, filling factor 0.4 observing the appearance of Pseudo-Gaps in the evolution of the study when the arrangement Fibonacci increases. We acknowledge the support of SNI CONACYT.

  3. Hydrogen sensor based on metallic photonic crystal slabs.

    Science.gov (United States)

    Nau, D; Seidel, A; Orzekowsky, R B; Lee, S-H; Deb, S; Giessen, H

    2010-09-15

    We present a hydrogen sensor based on metallic photonic crystal slabs. Tungsten trioxide (WO(3)) is used as a waveguide layer below an array of gold nanowires. Hydrogen exposure influences the optical properties of this photonic crystal arrangement by gasochromic mechanisms, where the photonic crystal geometry leads to sharp spectral resonances. Measurements reveal a change of the transmission depending on the hydrogen concentration. Theoretical limits for the detection range and sensitivity of this approach are discussed.

  4. An Incursion on Punching of Reinforced Concrete Flat Slabs

    OpenAIRE

    2009-01-01

    Starting from the early 60s continuous studies have been made regarding punching of concrete flat slabs. The evolution of technology and calculus systems influenced this engineering branch. Nowadays is possible to account in structural analysis all the non-linear behaviour of reinforced and prestressed concrete and to get the most close structural response in comparison with the real behaviour. As a controversy matter, several tests and theories have been developed. Nowadays researchers try t...

  5. DESIGN METHOD OF BENDING CAPACITY OF CONTINUOUS COMPOSITE SLAB

    Directory of Open Access Journals (Sweden)

    Liu Jin

    2016-04-01

    Full Text Available This paper presents a calculation method for predicting the ultimate loading capacity of continuous composite slabs. Only the small scale slide block test was needed to determine few mechanical parameters, and less cost had to be paid, in comparison to the conventional m-k method. Various load conditions and parameters were considered. Comparisons between test results and predicted results have shown that the proposed method has enough precision. Furthermore, the simplified method was also proposed for practical design.

  6. Temperature distribution of an infinite slab under point heat source

    Directory of Open Access Journals (Sweden)

    Wu Zhao-Chun

    2014-01-01

    Full Text Available The temperature field in an infinite slab under an instantaneous or continuous point heat source is studied numerically. The numerical results reveal the temperature distribution and its change regularity, which are significant for the temperature control encountered in many practical manufacturing processes, such as the laser treatment processes on the surface of films, welding and cutting, and even the design of measuring devices for thermal properties of material.

  7. Project B: Improved Liquid Steel Feed For Slab Casters

    Energy Technology Data Exchange (ETDEWEB)

    Brent S. Isaacson; Mike Slepian; Thomas Richter

    1998-10-01

    This report describes the completion of the development of an electromagnetic valve to control liquid steel flow for improved liquid steel feeding for slab casters. Achievements result from a joint research effort between Westinghouse Science and Technology Center, North American Refractories and U.S. Steel. This effort is part of the American Iron and Steel Institute's (AISI) Advanced Process Control Program, a collaboration between the U.S. Department of Energy (DOE) and fifteen North American steel makers.

  8. Technical Report: Optimizing the Slab Yard Planning and Crane Scheduling Problem using a Two-Stage Approach

    DEFF Research Database (Denmark)

    Hansen, Anders Dohn; Clausen, Jens

    2008-01-01

    In this paper, we present The Slab Yard Planning and Crane Scheduling Problem. The problem has its origin in steel production facilities with a large throughput. A slab yard is used as a buffer for slabs that are needed in the upcoming production. Slabs are transported by cranes and the problem c...

  9. Electromagnetic and ultrasonic investigations on a roman marble slab

    Science.gov (United States)

    Capizzi, Patrizia; Cosentino, Pietro L.

    2010-05-01

    The archaeological Museum of Rome (Museo delle Terme di Diocleziano) asked our group about the physical consistency of a marble slab (II - III century AD) that has recently fallen down during the transportation for an exhibition. In fact, due to insurance conflict, it was necessary to control the new fractures due to the recent accident and distinguish them from the ancient ones. The sculptured slab (today's size is 1280 x 70 x 9 cm), cut at the ends for a re-use as an inscription in the rear face, was restored (assemblage of different broken parts and cleaning) in contemporary times. We used different methodologies to investigate the slab: namely a pacometer (Protovale Elcometer) to individuate internal coupling pins, GPR (2000 MHz) and Ultrasonic (55 kHz) tomographic high-density surveys to investigate the internal extension of all the visible fractures and to search for the unknown internal ones. For every methodology used the quality of the acquired data was relatively high. They have been processed and compared to give a set of information useful for the bureaucratic problems of the Museum. Later on, the data have been processed in depth, for studying how to improve the data processing and for extracting all the information contained in the whole set of experimental data. Finally, the results of such a study in depth are exposed in detail.

  10. Calibrating a large slab vessel: A battle of the bulge

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, I.R.

    1993-10-01

    Slab tanks (critically-safe-by-geometry vessels) were proposed for the storage of concentrated, highly-enriched uranium solution in the design of the Fuel Processing Restoration (FPR) Facility at the Idaho Chemical Processing Plant (ICPP). Currently, measurements of bulk mass in ICPP annular vessels have standard deviations on the order of 0.2%, or less. ICPP personnel felt that their inexperience with the aforementioned expansions would prevent them from attaining comparable precision with slab tanks. To help assess the measurement accuracy of slab vessels, a full-scale mockup of those proposed for the FPR Facility was installed for test calibrations. These calibrations were designed to detect vessel expansion under differing conditions. This paper will compare the base-line, water calibrations with those of the higher-density aluminum nitrate, and any observed deflection will be described using vessel calibration techniques. The calibration using water at an elevated temperature was not performed due to the difficulty of maintaining the elevated temperature. This calibration probably will not be conducted because the construction of the FPR Facility has been halted.

  11. Prediction of temperature distribution in the hot rolling of slabs

    Science.gov (United States)

    Serajzadeh, S.; Karimi Taheri, A.; Mucciardi, F.

    2002-03-01

    In the process of continuous hot slab rolling, it is vital to know the temperature distribution within the slab along the length of the rolling mill because temperature is the dominant parameter controlling the kinetics of metallurgical transformations and the flow stress of the rolled metal. In other words, the microstructural changes, the mechanical properties as well as the final dimensions of the product and roll-force depend on the temperature distribution within the metal being rolled. In this paper, a mathematical model based on the finite element method is utilized to predict the temperature distribution and microstructural changes during the continuous hot slab rolling process. The effects of various parameters such as the heat of deformation, the work-roll temperature, the rolling speed, and the heat transfer coefficient between the work-roll and the metal are all taken into account in the analyses. To verify the validity of the model and the generated computer code, a comparison is carried out between the theoretical and plant-recorded results.

  12. Reducing Railway Noise with Porous Sound-Absorbing Concrete Slabs

    Directory of Open Access Journals (Sweden)

    Caiyou Zhao

    2014-01-01

    Full Text Available The effect of porous sound-absorbing concrete slabs on railway noise reduction is examined in this paper. First, the acoustical absorption coefficients of porous concrete materials with various aggregate types, gradations, fibre contents, and compaction indexes are measured in the laboratory. The laboratory results show that porous concrete that uses a composite of expanded perlite and slag as aggregate can not only obtain good acoustical absorption properties but also satisfy mechanical requirements. Also, the gradation of the combined aggregate has a significant effect on the acoustic absorption performance of the porous concrete, with an optimal aggregate gradation of 1~3 mm. Furthermore, the fibre content and compaction index affect both the strength and the acoustic absorption property of the porous concrete, with the optimum value of 0.3% and 1.6, respectively. Then, the findings from the laboratory studies are used to make porous sound-absorbing concrete slabs, which are applied in a test section. The measurements indicate that porous sound-absorbing concrete slabs can significantly reduce railway noise at different train speeds and that the amount of the noise reduction changes roughly linearly with speed when the train is traveling at less than 200 km/h. The maximum noise reduction is 4.05 dB at a speed of 200 km/h.

  13. High Performance Slab-on-Grade Foundation Insulation Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Louise F. [NorthernSTAR, St. Paul, MN (United States); Mosiman, Garrett E. [NorthernSTAR, St. Paul, MN (United States)

    2015-09-01

    ?A more accurate assessment of SOG foundation insulation energy savings than traditionally possible is now feasible. This has been enabled by advances in whole building energy simulation with 3-dimensional foundation modelling integration at each time step together with an experimental measurement of the site energy savings of SOG foundation insulation. Ten SOG insulation strategies were evaluated on a test building to identify an optimum retrofit insulation strategy in a zone 6 climate (Minneapolis, MN). The optimum insulation strategy in terms of energy savings and cost effectiveness consisted of two components: (a) R-20 XPS insulation above grade, and, (b) R-20 insulation at grade (comprising an outer layer of R-10 insulation and an interior layer of R-12 poured polyurethane insulation) tapering to R-10 XPS insulation at half the below-grade wall height (the lower half of the stem wall was uninsulated). The optimum insulation strategy was applied to single and multi-family residential buildings in climate zone 4 - 7. The highest site energy savings of 5% was realized for a single family home in Duluth, MN, and the lowest savings of 1.4 % for a 4-unit townhouse in Richmond, VA. SOG foundation insulation retrofit simple paybacks ranged from 18 to 47 years. There are other benefits of SOG foundation insulation resulting from the increase in the slab surface temperatures. These include increased occupant thermal comfort, and a decrease in slab surface condensation particularly around the slab perimeter.

  14. Wet or dry bandages for plaster back-slabs?

    Science.gov (United States)

    Baliga, Santosh; Finlayson, D

    2012-12-01

    Cotton crêpe and stretch bandages are commonly used in back-slabs and casts in orthopaedic practice. In theory they allow swelling to occur after injury while splinting the fracture. The application of a wet bandage prevents the Plaster-of-Paris (POP) setting too rapidly, giving time to apply a mould or attain correct limb position. However, we hypothesised that a wet bandage contracts upon drying and may cause constriction of the splint. This study aimed at determining whether there was any significant change in length of commonly used bandages when wet as well as any further change when left to dry again. Two types of bandage were evaluated. 250 mm strips of bandage were dipped into water, gently squeezed and laid flat on a bench. The bandage was then immediately measured in length. The strips were then left to dry and re-measured. This experimental study shows that both cotton crepe and cling significantly shrink by around 7% when wet. This phenomenon has the potential to significantly increase the pressure exerted on the limb by a back-slab. We speculate that the application of wet bandages is why some back-slabs may need released. It is therefore recommended that bandages should be applied only in the dry form. Copyright © 2011 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

  15. On the consistency of seismically imaged lower mantle slabs.

    Science.gov (United States)

    Shephard, G E; Matthews, K J; Hosseini, K; Domeier, M

    2017-09-08

    The geoscience community is increasingly utilizing seismic tomography to interpret mantle heterogeneity and its links to past tectonic and geodynamic processes. To assess the robustness and distribution of positive seismic anomalies, inferred as subducted slabs, we create a set of vote maps for the lower mantle with 14 global P-wave or S-wave tomography models. Based on a depth-dependent threshold metric, an average of 20% of any given tomography model depth is identified as a potential slab. However, upon combining the 14 models, the most consistent positive wavespeed features are identified by an increasing vote count. An overall peak in the most robust anomalies is found between 1000-1400 km depth, followed by a decline to a minimum around 2000 km. While this trend could reflect reduced tomographic resolution in the middle mantle, we show that it may alternatively relate to real changes in the time-dependent subduction flux and/or a mid-lower mantle viscosity increase. An apparent secondary peak in agreement below 2500 km depth may reflect the degree-two lower mantle slow seismic structures. Vote maps illustrate the potential shortcomings of using a limited number or type of tomography models and slab threshold criteria.

  16. Exact results for Casimir interactions between dielectric bodies: The weak-coupling or van der Waals Limit

    CERN Document Server

    Milton, Kimball A; Wagner, Jef

    2008-01-01

    In earlier papers we have applied multiple scattering techniques to calculate Casimir forces due to scalar fields between different bodies described by delta function potentials. When the coupling to the potentials became weak, closed-form results were obtained. We simplify this weak-coupling technique and apply it to the case of tenuous dielectric bodies, in which case the method involves the summation of van der Waals (Casimir-Polder) interactions. Once again exact results for finite bodies can be obtained. We present closed formulas describing the interaction between spheres and between cylinders, and between an infinite plate and a retangular slab of finite size. For such a slab, we consider the torque acting on it, and find non-trivial equilibrium points can occur.

  17. Upper Mantle Flow Beneath the Subducted Nazca Plate: Slab Contortions and Flattening (Invited)

    Science.gov (United States)

    Russo, R. M.

    2010-12-01

    The form of asthenospheric flow beneath subducted lithospheric slabs can be discerned using splitting of shear waves emanating from earthquakes in the slabs themselves. However, the subducted Nazca plate’s abrupt changes in morphology from a planar slab dipping 30° ENE beneath the central Andes to large areas of flat-lying slab beneath Peru, to the north, and Argentina, to the south, are a potential complication to the sub-slab mantle flow. S waves from earthquakes in the Nazca slab reveal details of the upper mantle flow field below and in the vicinity of the slab. Nazca slab earthquakes large enough to be well recorded (M > 5.4, typically), and deep enough to separate S from pS and sS (30-40 km or more), are suitable for such study, and, for events between 1990 and 2010, recording stations are mostly well-distributed azimuthally about the source event. The S waves were recorded at seismic stations at teleseismic distances from the events, and were corrected for known sub-station seismic anisotropy. Thus, the shear wave splitting engendered during their passage through the asthenospheric upper mantle beneath the slab was isolated, and asthenospheric deformation fabrics resulting from plastic flow beneath the slab mapped in some detail. Shear wave splitting fast directions and upper mantle flow beneath the Nazca plate are most often trench-parallel, consistent with trench-parallel upper mantle flow beneath the slab. Fast splitting polarizations at high angle to the strike of the slab occur in the transition regions from flat to normally dipping slab. Upper mantle flow beneath the slab in these regions appears to be channeled by the slab contortion. Upper mantle flow oceanward of the Nazca slab also appears to change abruptly from trends at a high angle to the Peru-Chile trench to trench-parallel as the top of the Nazca slab attains a depth of around 75 km. Trench-parallel sub-slab flow appears to develop once the asthenosphere beneath the Nazca plate is affected

  18. Numerical Modeling of Flat Slab Formation in Central Chile

    Science.gov (United States)

    Manea, M.; Perez-Gussinye, M.; Manea, V.; Fernandez, M.

    2009-12-01

    Subduction of oceanic plates beneath large continental masses is a rare process and at present it occurs only along western South America and Central Mexico. Likewise, flat subduction, understood here as where the slab enters at a normal angle and reverses its curvature to flatten at ~70-120 km depth, only occurs at present beneath South America. In general, the angle at which subduction occurs in the depth range of ~100 to ~200 km reflects the balance between negative buoyancy of the slab, elastic resistance of the slab to change the angle of subduction, and non-hydrostatic pressure forces induced by subduction-driven flow within the asthenosphere. The latter force, known as suction force, acts to prevent the slab from sinking into the mantle, and its magnitude increases with increasing subduction velocity, narrowness and viscosity decrease of the mantle wedge [Manea and Gurnis, 2007]. Recent observations show that the upper plate structure varies along the Andean margin, indicating that it is thicker and stronger above flat subduction zones and suggesting a correlation between upper plate structure and subduction angle [Pérez-Gussinyé et al., 2008; Booker et al., 2004]. In this study we use numerical models to explore the extent to which upper plate structure, through its influence on asthenospheric wedge shape and viscosity, can affect the angle of subduction. We test for which upper plate thickness and asthenospheric viscosity repeated cycles of steep and flat subduction are reproduced and compare our results to estimations of lithospheric thickness and the duration of flat and steep subduction cycles hypothesized along the Andean margin. Our models are constrained by realistic plate velocities in hot spot reference frame for both Nazca and South American plates [Muller et al., 2008], the Miocene-Present shortening for the Andes [Schelart et al., 2007] and realistic Nazca plate age distribution [Sdrolias and Muller, 2006]. Using the finite element package

  19. Detecting lower-mantle slabs beneath Asia and the Aleutians

    Science.gov (United States)

    Schumacher, L.; Thomas, C.

    2016-06-01

    To investigate the descend of subducted slabs we search for and analyse seismic arrivals that reflected off the surface of the slab. In order to distinguish between such arrivals and other seismic phases, we search for waves that reach a seismic array with a backazimuth deviating from the theoretical backazimuth of the earthquake. Source-receiver combinations are chosen in a way that their great circle paths do not intersect the slab region, hence the direct arrivals can serve as reference. We focus on the North and Northwest Pacific region by using earthquakes from Japan, the Philippines and the Hindu Kush area recorded at North American networks (e.g. USArray, Alaska and Canada). Using seismic array techniques for analysing the data and record information on slowness, backazimuth and traveltime of the observed out-of-plane arrivals we use these measurements to trace the wave back through a 1-D velocity model to its scattering/reflection location. We find a number of out-of-plane reflections. Assuming only single scattering, most out-of-plane signals have to travel as P-to-P phases and only a few as S-to-P phases, due to the length of the seismograms we processed. The located reflection points present a view of the 3-D structures within the mantle. In the upper mantle and the transition zone they correlate well with the edges of fast velocity regions in tomographic images. We also find reflection points in the mid- and lower mantle and their locations generally agree with fast velocities mapped by seismic tomography models suggesting that in the subduction regions we map, slabs enter the lower mantle. To validate our approach, we calculate and process synthetic seismograms for 3-D wave field propagation through a model containing a slab-like heterogeneity. We show, that depending on the source-receiver geometry relative to the reflection plane, it is indeed possible to observe and back-trace out-of-plane signals.

  20. First application of second-generation steel-free deck slabs for bridge rehabilitation

    Science.gov (United States)

    Eden, Ruth; Klowak, Chad; Mufti, Aftab A.; Tadros, Gamil; Bakht, Baidar; Loewen, Eric

    2004-07-01

    The arching action in concrete deck slabs for girder bridges is utilized fully in steel-free deck slabs. These concrete slabs, requiring no tensile reinforcement, are confined longitudinally by making them composite with the girders, and transversely by external steel straps connecting the top flanges of external girders. Between 1995 and 1999, five steel-free deck slabs without any tensile reinforcement were cast on Canadian bridges. All these slabs developed fairly wide full-depth cracks roughly midway between the girders. While extensive fatigue testing done in the past three years has confirmed that the presence of even wide cracks does not pose any danger to the safety of the structures, wide cracks are generally not acceptable to bridge engineers. The developers of the steel-free deck slabs have now conceded that these slabs should be reinforced with a crack-control mesh of nominal glass fibre reinforced polymer (GFRP) bars. Steel-free deck slabs with crack-control meshes are being referred as the second generation slabs. With the help of testing on full-scale models, it has been found that deck slabs with GFRP bars have the best fatigue resistance and those with steel bars the worst.

  1. Untangling Element Fluxes From The Subducting Slabs: Aqueous Solutions Through The Electrostatic Lense

    Science.gov (United States)

    Galvez, M.; Connolly, J. A.; Manning, C. E.

    2015-12-01

    Understanding the deep cycling of elements hinges on characterizing the chemistry of fluids in subduction zones. Aqueous solutions dielectric properties determine their characteristics as solvents for rocks. Predicting the composition and speciation of fluid solutions at equilibrium with complex mineral assemblages has been a long lasting challenge. We have developed a model to explore the composition and speciation of metamorphic aqueous solutions to upper mantle pressure and temperature. Our model combines Gibbs free energy minimization of rock and molecular fluids with an electrostatic approach to describe solute-solute and solute-solvent interactions in the fluid phase. Using an extension of the Debye-Onsager-Kirkwood model to characterize the dielectric properties of COH solutions, we derive aqueous fluid speciation by solving the mass action and charge balance of the system. This framework is applied to various slab lithologies. We find, e.g., that the pH of carbonated basalts and pelites is alkaline, i.e. ~2-2.5 pH units above neutrality, in C and Cl-free fluids and shows an isothermal decrease above the albite-jadeite-quartz equilibrium, at P ~ 2 GPa. C and Chlorine (1M) decrease the alkalinity by a combined ~ 1.5 pH unit, with variations tied to the thermal structure and mineral assemblages along typical P-T paths. The results produced are compared with experimental solubility measurements on identical systems. Significant discrepancies reveal that the process of solute polymerization at elevated T and P is more general than previously recognized. Unaccounted species contain, in addition to Na, Si and Al, an important fraction of the total dissolved load of the elements K, Ca and Mg (>50% at T= 600 °C and P = 2 Ga). Finally, we show that knowledge of the acid-base properties of metamorphic fluid solutions affect the (de)coupling between C and alkali-earth mobility, and magnitude of low-T C transfers associated to carbonate dissolution through time. This

  2. Hybrid integration of synthesized dielectric image waveguides in substrate integrated circuit technology and its millimeter wave applications

    Science.gov (United States)

    Patrovsky, Andreas

    This thesis deals with a novel type of integrated dielectric waveguide which is synthesized on a planar grounded substrate by perforation of the zones adjacent to a guiding channel in the center. The resulting Substrate Integrated Image Guide (SIIG) not only allows for low-loss guidance of electromagnetic waves in a similar way as the standard image guide, but also meets the requirements of low cost and ease of integration. A first objective was the detailed analysis of the propagation properties of fundamental and higher order modes in this waveguide structure, regarding attenuation, dispersion behavior, bandwidth, leakage effects, and the impact of fabrication tolerances. For this purpose, specifically adapted techniques of analysis are presented, since established methods for the conventional image guide can not be applied to the more complex periodic SIIG. Commercial electromagnetic full-wave software is used along with a dual-line approach involving a subsequent extraction of the propagation constant from simulated S-parameters. Alternatively, the solution of the eigenmode problem of a single SIIG unit cell also performs the task. Both techniques are in good agreement and provide accurate results, which is supported by measurements on laser-fabricated prototypes. It is shown that the achievable attenuation is much lower than in the standard integrated technologies and that losses mainly depend on the chosen dielectric material. As a consequence, the SIIG also is an attractive technology for applications beyond the mmW band, i. e. in the terahertz range. Design recommendations for the geometric parameters of the SIIG are discussed and a simplified equivalent model with homogeneous dielectric regions is introduced to speed up the design of passive components. Low-loss transitions between dissimilar waveguide structures are indispensable key components for a hybrid integrated platform. In order to enable the connection of standard measurement equipment in the W

  3. High permittivity gate dielectric materials

    CERN Document Server

    2013-01-01

    "The book comprehensively covers all the current and the emerging areas of the physics and the technology of high permittivity gate dielectric materials, including, topics such as MOSFET basics and characteristics, hafnium-based gate dielectric materials, Hf-based gate dielectric processing, metal gate electrodes, flat-band and threshold voltage tuning, channel mobility, high-k gate stack degradation and reliability, lanthanide-based high-k gate stack materials, ternary hafnia and lanthania based high-k gate stack films, crystalline high-k oxides, high mobility substrates, and parameter extraction. Each chapter begins with the basics necessary for understanding the topic, followed by a comprehensive review of the literature, and ultimately graduating to the current status of the technology and our scientific understanding and the future prospects."

  4. Materials Fundamentals of Gate Dielectrics

    CERN Document Server

    Demkov, Alexander A

    2006-01-01

    This book presents materials fundamentals of novel gate dielectrics that are being introduced into semiconductor manufacturing to ensure the continuous scalling of the CMOS devices. This is a very fast evolving field of research so we choose to focus on the basic understanding of the structure, thermodunamics, and electronic properties of these materials that determine their performance in device applications. Most of these materials are transition metal oxides. Ironically, the d-orbitals responsible for the high dielectric constant cause sever integration difficulties thus intrinsically limiting high-k dielectrics. Though new in the electronics industry many of these materials are wel known in the field of ceramics, and we describe this unique connection. The complexity of the structure-property relations in TM oxides makes the use of the state of the art first-principles calculations necessary. Several chapters give a detailed description of the modern theory of polarization, and heterojunction band discont...

  5. Dielectric Bow-tie Nanocavity

    CERN Document Server

    Lu, Qijing; Zou, Chang-Ling

    2013-01-01

    We propose a novel dielectric bow-tie nanocavity consisting of two tip-to-tip opposite triangle semiconductor nanowires, whose end faces are coated by silver nanofilms. Based on the advantages of the dielectric slot and tip structures, and the high reflectivity from the silver mirror, light can be confined in this nanocavity with low loss. We demonstrate that the mode excited in this nanocavity has a deep subwavelength mode volume of 2.8*10^-4 um3 and a high quality factor of 4.9*10^4 (401.3), consequently an ultrahigh Purcell factor of 1.6*10^7 (1.36*10^5), at 4.5 K (300 K) around the resonance wavelength of 1550 nm. This dielectric bow-tie nanocavity may find applications for integrated nanophotonic circuits, such as high-efficiency single photon source, thresholdless nanolaser, and cavity QED strong coupling experiments.

  6. Capacitive Cells for Dielectric Constant Measurement

    Science.gov (United States)

    Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco

    2015-01-01

    A simple capacitive cell for dielectric constant measurement in liquids is presented. As an illustrative application, the cell is used for measuring the degradation of overheated edible oil through the evaluation of their dielectric constant.

  7. Capacitive Cells for Dielectric Constant Measurement

    Science.gov (United States)

    Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco

    2015-01-01

    A simple capacitive cell for dielectric constant measurement in liquids is presented. As an illustrative application, the cell is used for measuring the degradation of overheated edible oil through the evaluation of their dielectric constant.

  8. Optimization of dielectric constant temperature coefficient of pyrochlores containing bismuth

    Institute of Scientific and Technical Information of China (English)

    REN Qing-li; LUO Qiang; CHEN Shou-tian

    2005-01-01

    The Bi2O3-ZnO-Nb2O5 (BZN)-based ceramic samples were prepared according to the optimum composition of (Bi3xZn2-3x)(Znx Nb2-x)O7 by solid state reaction. The BZN ceramic structure and the dielectric properties were explored via X-ray diffractometer(XRD), differential thermal analysis(DTA), scanning electron microscope (SEM), and HP4275A impedance analysis. The amphoteric surface active agent with alcohol amine double nature is introduced when the raw materials are mixed and ground. The anatase titania doped BZN-based ceramics was also investigated. Either doping the anatase TiO3 or adding the surface active agent or both of them can widen sintering temperature range which satisfies the zero temperature coefficient (0±30 × 10-6/℃) of the BZN ceramics. And these BZN ceramics with diphasic pyrochlore structure possess excellent dielectric properties.

  9. Analog Optical Computing Based on Dielectric Meta-reflect-array

    CERN Document Server

    Chizari, Ata; Jamali, Mohammad Vahid; Salehi, Jawad A

    2016-01-01

    In this paper, we realize the concept of analog computing using an array of engineered gradient dielectric meta-reflect-array. The proposed configuration consists of individual subwavelength silicon nanobricks in combination with fused silica spacer and silver ground plane realizing a reflection beam with full phase coverage $2\\pi$ degrees as well as amplitude range $0$ to $1$. Spectrally overlapping electric and magnetic dipole resonances, such high-index dielectric metasurfaces can locally and independently manipulate the amplitude and phase of the incident electromagnetic wave. This practically feasible structure overcomes substantial limitations imposed by plasmonic metasurfaces such as absorption losses and low polarization conversion efficiency in the visible range. Using such CMOS-compatible and easily integrable platforms promises highly efficient ultrathin planar wave-based computing systems which circumvent the drawbacks of conventional bulky lens-based signal processors. Based on these key properti...

  10. Thin film transistors for flexible electronics: contacts, dielectrics and semiconductors.

    Science.gov (United States)

    Quevedo-Lopez, M A; Wondmagegn, W T; Alshareef, H N; Ramirez-Bon, R; Gnade, B E

    2011-06-01

    The development of low temperature, thin film transistor processes that have enabled flexible displays also present opportunities for flexible electronics and flexible integrated systems. Of particular interest are possible applications in flexible sensor systems for unattended ground sensors, smart medical bandages, electronic ID tags for geo-location, conformal antennas, radiation detectors, etc. In this paper, we review the impact of gate dielectrics, contacts and semiconductor materials on thin film transistors for flexible electronics applications. We present our recent results to fully integrate hybrid complementary metal oxide semiconductors comprising inorganic and organic-based materials. In particular, we demonstrate novel gate dielectric stacks and semiconducting materials. The impact of source and drain contacts on device performance is also discussed.

  11. A Wideband Circularly Polarized Pixelated Dielectric Resonator Antenna

    Science.gov (United States)

    Trinh-Van, Son; Yang, Youngoo; Lee, Kang-Yoon; Hwang, Keum Cheol

    2016-01-01

    The design of a wideband circularly polarized pixelated dielectric resonator antenna using a real-coded genetic algorithm (GA) is presented for far-field wireless power transfer applications. The antenna consists of a dielectric resonator (DR) which is discretized into 8 × 8 grid DR bars. The real-coded GA is utilized to estimate the optimal heights of the 64 DR bars to realize circular polarization. The proposed antenna is excited by a narrow rectangular slot etched on the ground plane. A prototype of the proposed antenna is fabricated and tested. The measured −10 dB reflection and 3 dB axial ratio bandwidths are 32.32% (2.62–3.63 GHz) and 14.63% (2.85–3.30 GHz), respectively. A measured peak gain of 6.13 dBic is achieved at 3.2 GHz. PMID:27563897

  12. Thin film transistors for flexible electronics: Contacts, dielectrics and semiconductors

    KAUST Repository

    Quevedo-López, Manuel Angel Quevedo

    2011-06-01

    The development of low temperature, thin film transistor processes that have enabled flexible displays also present opportunities for flexible electronics and flexible integrated systems. Of particular interest are possible applications in flexible sensor systems for unattended ground sensors, smart medical bandages, electronic ID tags for geo-location, conformal antennas, radiation detectors, etc. In this paper, we review the impact of gate dielectrics, contacts and semiconductor materials on thin film transistors for flexible electronics applications. We present our recent results to fully integrate hybrid complementary metal oxide semiconductors comprising inorganic and organic-based materials. In particular, we demonstrate novel gate dielectric stacks and semiconducting materials. The impact of source and drain contacts on device performance is also discussed. Copyright © 2011 American Scientific Publishers.

  13. Strong terahertz absorption in all-dielectric Huygens' metasurfaces.

    Science.gov (United States)

    Cole, Michael A; Powell, David A; Shadrivov, Ilya V

    2016-09-19

    We propose an all dielectric metamaterial that acts as a perfect terahertz absorber without a ground plane. The unit cell consists of a dielectric cylinder embedded in a low index material. In order to achieve near-perfect terahertz absorption (99.5%) we employ impedance matching of the electric and magnetic resonances within the cylinders of the Huygens' metasurface. The impedance matching is controlled by changing the aspect ratio between the height and diameter of the cylinder. We show that the absorption resonance can be tuned to particular frequencies from 0.3 to 1.9 THz via changing the geometry of the structure while keeping a nearly constant aspect ratio of the cylinders.

  14. Strong terahertz absorption in all-dielectric Huygens’ metasurfaces

    Science.gov (United States)

    Cole, Michael A.; Powell, David A.; Shadrivov, Ilya V.

    2016-10-01

    We propose an all dielectric metamaterial that acts as a perfect terahertz absorber without a ground plane. The unit cell consists of a dielectric cylinder embedded in a low index material. In order to achieve near-perfect terahertz absorption (99.5%) we employ impedance matching of the electric and magnetic resonances within the cylinders of the Huygens’ metasurface. The impedance matching is controlled by changing the aspect ratio between the height and diameter of the cylinder. We show that the absorption resonance can be tuned to particular frequencies from 0.3 to 1.9 THz via changing the geometry of the structure while keeping a nearly constant aspect ratio of the cylinders.

  15. A Wideband Circularly Polarized Pixelated Dielectric Resonator Antenna.

    Science.gov (United States)

    Trinh-Van, Son; Yang, Youngoo; Lee, Kang-Yoon; Hwang, Keum Cheol

    2016-08-23

    The design of a wideband circularly polarized pixelated dielectric resonator antenna using a real-coded genetic algorithm (GA) is presented for far-field wireless power transfer applications. The antenna consists of a dielectric resonator (DR) which is discretized into 8 × 8 grid DR bars. The real-coded GA is utilized to estimate the optimal heights of the 64 DR bars to realize circular polarization. The proposed antenna is excited by a narrow rectangular slot etched on the ground plane. A prototype of the proposed antenna is fabricated and tested. The measured -10 dB reflection and 3 dB axial ratio bandwidths are 32.32% (2.62-3.63 GHz) and 14.63% (2.85-3.30 GHz), respectively. A measured peak gain of 6.13 dBic is achieved at 3.2 GHz.

  16. Implications of Electrical Conductivity Structure Associated With the Nazca Slab Beneath Argentina

    Science.gov (United States)

    Booker, J. R.; Pomposiello, C.; Favetto, A.; Burd, A.

    2005-12-01

    From 1998 to 2005 we have collected more than 100 magnetotelluric (MT) sites in the Sierras Pampeanas of Argentina between 27°S and 33°S. The main targets of these investigations were initially active structures within this thick-skinned tectonics province. However, it became clear as we progressed that the subducted Nazca slab, which is anonymously flat under this area was generating observable electrical structures at mantle depth. The high resistivity of the crystalline crust and the generally thin, but conductive sedimentary cover of much of this area provide a favorable situation for the penetration of electromagnetic energy deep into the mantle. Our longest profile extends from near Chile to near Uruguay at 31.5°S, where the flat slab is widest. The flattest portion of the slab is both electrically conductive and seismically active. This seismic activity terminates eastward at almost the same place that the slab conductor ends and the overlying lithosphere becomes seismically active and electrically conductive. A unifying explanation is that as the slab descends to its flat portion at 100 km it dehydrates. The free water raises pore pressure and triggers earthquakes. As the slab progresses eastward, the fluids leak upward out of the slab into the lithosphere, the slab pore pressure drops, electrical pathways close and the slab becomes resistive and quiet. An intriguing possibility is that the wet lithosphere created in this process sets the stage for a massive volcanic flare-up if the slab dip increases and an asthenospheric wedge reforms. Further east, the slab plunges nearly vertically into the mantle when it meets the electrically resistive and presumably mechanically strong backstop of the root of the Rio de la Plata Craton. A near vertical conductor is found between the plunging slab and the resistive root. This conductor rises to the base of the lithosphere, but does not penetrate. It is almost certainly due to partial melt, but whether this melting

  17. Short range ferromagnetic, magneto-electric, and magneto-dielectric effect in ceramic Co3TeO6

    Science.gov (United States)

    Singh, Harishchandra; Ghosh, Haranath; Chandrasekhar Rao, T. V.; Sharma, G.; Saha, J.; Patnaik, S.

    2016-01-01

    We report observation of magneto-electric and magneto-dielectric couplings along with short range ferromagnetic order in ceramic Cobalt Tellurate (Co3TeO6, CTO) using magnetic, structural, dielectric, pyroelectric, and polarization studies. DC magnetization along with dielectric constant measurements indicate a coupling between magnetic order and electrical polarization. A strong anomaly in the dielectric constant at ˜17.4 K in zero magnetic field indicates spontaneous electric polarization, consistent with a recent neutron diffraction study. Observation of weak short range ferromagnetic order at lower temperatures is attributed to the Griffiths-like ferromagnetism. Furthermore, magnetic field dependence of the ferroelectric transition follows earlier theoretical predictions, applicable to single crystal CTO. Finally, combined dielectric, pyroelectric, and polarization measurements suggest that the ground state of CTO may possess spontaneous symmetry breaking in the absence of magnetic field.

  18. Extinction by the long dielectric needles

    CERN Document Server

    Cherkas, Nadejda L

    2016-01-01

    Electromagnetic wave extinction by the very long but finite dielectric needle is compared with that by the infinite dielectric cylinder for an oblique incidence of the electromagnetic wave. It is shown that the renormalized Hankel functions without the logarithmic terms should be used for the calculation of the extinction per unit length of the infinite dielectric cylinder to apply it for extinction calculations by the finite dielectric cylinder.

  19. Dielectric nanostructures with high laser damage threshold

    Science.gov (United States)

    Ngo, C. Y.; Hong, L. Y.; Deng, J.; Khoo, E. H.; Liu, Z.; Wu, R. F.; Teng, J. H.

    2017-02-01

    Dielectric-based metamaterials are proposed to be the ideal candidates for low-loss, high-efficiency devices. However, to employ dielectric nanostructures for high-power applications, the dielectric material must have a high laser-induced damaged threshold (LIDT) value. In this work, we investigated the LIDT values of dielectric nanostructures for high-power fiber laser applications. Consequently, we found that the fabricated SiO2 nanostructured lens can withstand laser fluence exceeding 100 J/cm2.

  20. Dielectric barrier discharges applied for optical spectrometry

    Science.gov (United States)

    Brandt, S.; Schütz, A.; Klute, F. D.; Kratzer, J.; Franzke, J.

    2016-09-01

    The present review reflects the importance of dielectric barrier discharges for optical spectrometric detection in analytical chemistry. In contrast to usual discharges with a direct current the electrodes are separated by at least one dielectric barrier. There are two main features of the dielectric barrier discharges: they can serve as dissociation and excitation devices as well as ionization sources, respectively. This article portrays various application fields of dielectric barrier discharges in analytical chemistry used for elemental and molecular detection with optical spectrometry.

  1. Dielectric material degradation monitoring of dielectric barrier discharge plasma actuators

    Science.gov (United States)

    Hanson, Ronald E.; Houser, Nicole M.; Lavoie, Philippe

    2014-01-01

    It is a known phenomenon that some dielectric materials used to construct plasma actuators degrade during operation. However, the rate at which this process occurs, to what extent, as well as a method to monitor is yet to be established. In this experimental study, it is shown that electrical measurements can be used to monitor changes in the material of the plasma actuators. The procedure we introduce for monitoring the actuators follows from the work of Kriegseis, Grundmann, and Tropea [Kriegseis et al., J. Appl. Phys. 110, 013305 (2011)], who used Lissajous figures to measure actuator power consumption and capacitance. In the present study, we quantify changes in both the power consumption and capacitance of the actuators over long operating durations. It is shown that the increase in the effective capacitance of the actuator is related to degradation (thinning) of the dielectric layer, which is accompanied by an increase in actuator power consumption. For actuators constructed from layers of Kapton® polyimide tape, these changes are self-limiting. Although the polyimide film degrades relatively quickly, the underlying adhesive layer appears to remain intact. Over time, the effective capacitance was found to increase by up to 36%, 25%, and 11% for actuators constructed with 2, 3, and 4 layers of Kapton tape, respectively. A method is presented to prevent erosion of the Kapton dielectric layer using a coating of Polydimethylsiloxane oil. It is shown the application of this treatment can delay the onset of degradation of the Kapton dielectric material.

  2. Asymmetric Coulomb fluids at randomly charged dielectric interfaces: Anti-fragility, overcharging and charge inversion

    Science.gov (United States)

    Naji, Ali; Ghodrat, Malihe; Komaie-Moghaddam, Haniyeh; Podgornik, Rudolf

    2014-11-01

    We study the distribution of multivalent counterions next to a dielectric slab, bearing a quenched, random distribution of charges on one of its solution interfaces, with a given mean and variance, both in the absence and in the presence of a bathing monovalent salt solution. We use the previously derived approach based on the dressed multivalent-ion theory that combines aspects of the strong and weak coupling of multivalent and monovalent ions in a single framework. The presence of quenched charge disorder on the charged surface of the dielectric slab is shown to substantially increase the density of multivalent counterions in its vicinity. In the counterion-only model (with no monovalent salt ions), the surface disorder generates an additional logarithmic attraction potential and thus an algebraically singular counterion density profile at the surface. This behavior persists also in the presence of a monovalent salt bath and results in significant violation of the contact-value theorem, reflecting the anti-fragility effects of the disorder that drive the system towards a more "ordered" state. In the presence of an interfacial dielectric discontinuity, depleting the counterion layer at the surface, the charge disorder still generates a much enhanced counterion density further away from the surface. Likewise, the charge inversion and/or overcharging of the surface occur more strongly and at smaller bulk concentrations of multivalent counterions when the surface carries quenched charge disorder. Overall, the presence of quenched surface charge disorder leads to sizable effects in the distribution of multivalent counterions in a wide range of realistic parameters and typically within a distance of a few nanometers from the charged surface.

  3. Composition and formation of Palaeozoic Erlangping ophiolitic slab, North Qinling: Evidence from geology and geochemistry

    Institute of Scientific and Technical Information of China (English)

    孙勇; 卢欣祥; 韩松; 张国伟

    1996-01-01

    The analyses based on the protolith formation, metamorphic and deformation reveal that the Erlangping Group is composed of different lithological slices, without any significance in stratigraphy. It is therefore to discard the Erlangping Group into the Damiao slab, the Erlangping ophiolitic slab and the Xiaozhai slab. The Erlangping ophiolitic slab only includes the former Huoshenmiao Formation and it is mainly composed of massive basalts, pillow basalts, sheet dikes, gabbro and a few of ultramafic intrusions with patches of plagiogranite, overlain by radiolarian silicolites. A lot of microfossils were discovered in the silicolites that mark the Erlangping ophiolitic slab mainly formed in the Early to Middle Ordovician. In geochemistry, most of the basalts and diabase dikes are consistent with N-MORB except a few of samples effected by alteration. The Erlangping ophiolitic slab represents a remnant piece of ancient ocean crust which is most suitable to a back-arc basin setting. A mean 207Pb/206Pb age of

  4. Numerical Analysis of Dynamic Behavior of RC Slabs Under Blast Loading

    Institute of Scientific and Technical Information of China (English)

    DU Hao; LI Zhongxian

    2009-01-01

    In Order to reduce economic and life losses due to terrorism or accidental explosion threats,reinforced concrete(RC)slabs of buildings need to be designed or retrofitted to resist blast loading.In this paper the dynamic behavior Of RC slabs under blast loading and its influencing factors are studied.The numerical model of an RC slab subjected to blast loading is established using the explicit dynamic analysis software.Both the strain rate effect and the damage accumulation are taken into account in the material model.The dynamic responses of the RC slab subiected to blast loading are analyzed,and the influence of concrete strength,thickness and reinforcement ratio on the behavior of the RC slab under blast loading iS numerically investigated.Based on the numerical results.some principles for blast-resistant design and retrofitting are proposed to improve the behavior of the RC slab subjected to blast loading.

  5. Fabrication slab waveguide based polymethyl methacrylate (PMMA) with spin coating method

    Science.gov (United States)

    Andriawan, Alan; Pramono, Yono Hadi; Masoed, Asnawi

    2016-11-01

    Fabrication and characterization slab waveguide based polymethyl methacrylate (PMMA) has been carried out. Slab waveguide fabrication done by the spin coating method. Slab waveguide fabrication process carried out by the rotational speed of 1000, 2000, and 3000 rpm respectively played for 10 seconds. Then the slab waveguides heated using a hot plate. Heating process starting from room temperature then increased 5°C to 70°C with a 5 minute warm-up time interval. From the results of characterization fabricated slab waveguides to determine the film thickness is made. Then made observations on the waveguide by passing the light beam He-Ne laser on the thin layer through a single mode optical fiber. From the results of characterization is known that the fabrication of a slab waveguide with a layer thickness of 166 μm. From this research it is known that polymethyl methacrylate (PMMA) can be used as a waveguide with a spin coating method.

  6. Extraordinary wavelength reduction in terahertz graphene-cladded photonic crystal slabs

    CERN Document Server

    Williamson, Ian A D; Wang, Zheng

    2015-01-01

    Photonic crystal slabs have been widely used in nanophotonics for light confinement, dispersion engineering, nonlinearity enhancement, and other unusual effects arising from their structural periodicity. Sub-micron device sizes and mode volumes are routine for silicon-based photonic crystal slabs, however spectrally they are limited to operate in the near infrared. Here, we show that two single-layer graphene sheets allow silicon photonic crystal slabs with submicron periodicity to operate in the terahertz regime, with an extreme 100x wavelength reduction and excellent out-of-plane confinement. The graphene-cladded photonic crystal slabs exhibit band structures closely resembling those of ideal two-dimensional photonic crystals, with broad two-dimensional photonic band gaps even when the slab thickness approaches zero. The overall photonic band structure not only scales with the graphene Fermi level, but more importantly scales to lower frequencies with reduced slab thickness. Just like ideal 2D photonic crys...

  7. Behaviour Of Multi-Storied Flat Slab Building Considering Shear Walls: A Review

    Directory of Open Access Journals (Sweden)

    Dhanaji R. Chavan

    2016-10-01

    Full Text Available Recently there has been a considerable increase in the number of tall buildings, both residential and commercial, and modern trend is towards taller structures. Flat slab is most widely used systems in reinforced concrete construction. Flat-slab building structures possesses major advantages over traditional slab-beam-column structures taking a advantages of reduced floor height, shorter construction time, architectural –functional and economical aspects. But in flat slab building columns are directly provides supports to slab with eliminating beams so there is requirement of provision of shear walls to increase the stiffness of building against lateral forces. Shear wall system are one of the most commonly used lateral load resisting in high rise building. Shear wall has high in plane stiffness and strength. The present paper reviews various research works carried out by several researchers on multi-storied buildings provided with flat slab and shear walls.

  8. Influence of Dog-Bone Apex on Shape During Slab Horizontal Rolling Process

    Institute of Scientific and Technical Information of China (English)

    YU Hai-liang; LIU Xiang-hua; LI Chang-sheng; WANG Guo-dong

    2007-01-01

    The deformation of slab with dog-bone shape during the horizontal rolling process was simulated using FEM, and the influences of apical dislocation of dog-bone on the slab spread as well as the minimum crop end loss and the lost width at slab head and tail were analyzed. The results show that with the increase in the apical dislocation of dog-bone (LA), the slab spread and the minimum crop end loss at slab head and tail decrease, while the lost width at slab head and tail increases. Meanwhile, the relationships of S/LA-LA, LH/LA-LA, WH/LA-LA, LT/LA-LA, and WT/LA-LA were obtained.

  9. Cenozoic tectonics of western North America controlled by evolving width of Farallon slab.

    Science.gov (United States)

    Schellart, W P; Stegman, D R; Farrington, R J; Freeman, J; Moresi, L

    2010-07-16

    Subduction of oceanic lithosphere occurs through two modes: subducting plate motion and trench migration. Using a global subduction zone data set and three-dimensional numerical subduction models, we show that slab width (W) controls these modes and the partitioning of subduction between them. Subducting plate velocity scales with W(2/3), whereas trench velocity scales with 1/W. These findings explain the Cenozoic slowdown of the Farallon plate and the decrease in subduction partitioning by its decreasing slab width. The change from Sevier-Laramide orogenesis to Basin and Range extension in North America is also explained by slab width; shortening occurred during wide-slab subduction and overriding-plate-driven trench retreat, whereas extension occurred during intermediate to narrow-slab subduction and slab-driven trench retreat.

  10. Artificial Dielectric Shields for Integrated Transmission Lines

    NARCIS (Netherlands)

    Ma, Y.; Rejaei, B.; Zhuang, Y.

    2008-01-01

    We present a novel shielding method for on-chip transmission lines built on conductive silicon substrates. The shield consists of an artificial dielectric with a very high in-plane dielectric constant, built from two patterned metal layers isolated by a very thin dielectric film. Inserted below an i

  11. Silicone elastomers with high dielectric permittivity and high dielectric breakdown strength based on dipolar copolymers

    DEFF Research Database (Denmark)

    Madsen, Frederikke Bahrt; Yu, Liyun; Daugaard, Anders Egede;

    2014-01-01

    Dielectric elastomers (DES) are a promising new transducer technology, but high driving voltages limit their current commercial potential. One method used to lower driving voltage is to increase dielectric permittivity of the elastomer. A novel silicone elastomer system with high dielectric permi......-4-nitrobenzene. Here, a high increase in dielectric permittivity (similar to 70%) was obtained without compromising other favourable DE properties such as elastic modulus, gel fraction, dielectric loss and electrical breakdown strength. © 2014 Elsevier Ltd. All rights reserved....

  12. A Coupled Computational Scheme on Thermal and Phase Structures of Subducting Slabs

    Institute of Scientific and Technical Information of China (English)

    JING Zhi-Cheng; MNG Jie-Yuan

    2001-01-01

    The thermodynamic processes undergone by olivine, the chief mineral of subducting slabs, are important in studying the mechanisms of deep-focus earthquakes and the interaction between slabs and the surrounding mantle. We propose a modified coupling scheme to calculate the thermal and phase structures of slabs, which presents a high computational' accuracy at an accessible CPU expense. Using the new code of computation, we have calculated the thermal and phase structures of the Kurile subduction zone.

  13. Effect of aseismic ridge subduction on slab geometry and overriding plate deformation: Insights from analogue modeling

    OpenAIRE

    Martinod, Joseph; Guillaume, Benjamin; Espurt, Nicolas; Faccenna, Claudio; Funiciello, Francesca; Regard, Vincent

    2013-01-01

    International audience; We present analogue models simulating the subduction of a buoyant ridge beneath an advancing overriding plate whose velocity is imposed by lateral boundary conditions. We analyze the 3D geometry of the slab, the deformation and topography of the overriding plate. Ridge subduction diminishes the dip of the slab, eventually leading to the appearance of a horizontal slab segment. This result contrasts with that obtained in free subduction experiments, in which ridge subdu...

  14. Failure analysis of edge flat-slab column connections with shear reinforcement

    OpenAIRE

    2013-01-01

    Flat-slab column connections are susceptible to brittle failure, which lead to the necessity of improving ductility and ultimate strength. In case of edge connections, the behaviour at ultimate state is highly influenced by nonsymmetrical distribution of stresses originated by a moment transfer between the slab and the column. The paper presents the test results of three full-scale reinforced concrete flat-slab edge connections with stud-rail shear reinforcement subjected to concentrated load...

  15. The dynamics of double slab subduction from numerical and semi-analytic models

    Science.gov (United States)

    Holt, A.; Royden, L.; Becker, T. W.

    2015-12-01

    Regional interactions between multiple subducting slabs have been proposed to explain enigmatic slab kinematics in a number of subduction zones, a pertinent example being the rapid pre-collisional plate convergence of India and Eurasia. However, dynamically consistent 3-D numerical models of double subduction have yet to be explored, and so the physics of such double slab systems remain poorly understood. Here we build on the comparison of a fully numerical finite element model (CitcomCU) and a time-dependent semi-analytic subduction models (FAST) presented for single subduction systems (Royden et. al., 2015 AGU Fall Abstract) to explore how subducting slab kinematics, particularly trench and plate motions, can be affected by the presence of an additional slab, with all of the possible slab dip direction permutations. A second subducting slab gives rise to a more complex dynamic pressure and mantle flow fields, and an additional slab pull force that is transmitted across the subduction zone interface. While the general relationships among plate velocity, trench velocity, asthenospheric pressure drop, and plate coupling modes are similar to those observed for the single slab case, we find that multiple subducting slabs can interact with each other and indeed induce slab kinematics that deviate significantly from those observed for the equivalent single slab models. References Jagoutz, O., Royden, L. H., Holt, A. F. & Becker, T. W., 2015, Nature Geo., 8, 10.1038/NGEO2418. Moresi, L. N. & Gurnis, M., 1996, Earth Planet. Sci. Lett., 138, 15-28. Royden, L. H. & Husson, L., 2006, Geophys. J. Int. 167, 881-905. Zhong, S., 2006, J. Geophys. Res., 111, doi: 10.1029/2005JB003972.

  16. Bending and Shear Experimental Tests and Numerical Analysis of Composite Slabs Made Up of Lightweight Concrete

    OpenAIRE

    F. P. Alvarez Rabanal; J. Guerrero-Muñoz; Alonso-Martinez, M.; J. E. Martinez-Martinez

    2016-01-01

    The aim of this paper is to understand the structural behaviour of composite slabs. These composite slabs are made of steel and different kinds of concrete. The methodology used in this paper combines experimental studies with advanced techniques of numerical simulations. In this paper, four types of concrete were used in order to study their different structural strengths in composite slabs. The materials used were three lightweight concretes, a normal concrete, and a cold conformed steel de...

  17. Penelitian pengaruh plasticizer DOP terhadap sifat fisis slab kompon PVC untuk acuan sepatu

    OpenAIRE

    Kelompok Peneliti Proses Produksi Barang Plastik

    1984-01-01

    Abstract DOP Plasticizer is a chemical substance which its function is to increase the plasticity of PVC compound slab. By adding DOP plasticizer can imporoves the impact resistance properties and decrease the hardness of slab. The utilization of 30% DOP results the greatest impact resistance (6,1016 kg/cm), and the hardness 55 shore A of PVC coumpund slab produced by this experiment.

  18. Penelitian pengaruh plasticizer DOP terhadap sifat fisis slab kompon PVC untuk acuan sepatu

    Directory of Open Access Journals (Sweden)

    Kelompok Peneliti Proses Produksi Barang Plastik

    1984-12-01

    Full Text Available Abstract DOP Plasticizer is a chemical substance which its function is to increase the plasticity of PVC compound slab. By adding DOP plasticizer can imporoves the impact resistance properties and decrease the hardness of slab. The utilization of 30% DOP results the greatest impact resistance (6,1016 kg/cm, and the hardness 55 shore A of PVC coumpund slab produced by this experiment.

  19. Ogive Nose Hard Missile Penetrating Concrete Slab Numerical Simulation Approach

    Directory of Open Access Journals (Sweden)

    Qadir Bux

    2011-01-01

    Full Text Available Great demand exists for more efficient design to protect delicate and serious structures such as nuclear plants, Power plants, Weapon Industries, weapons storage places, water retaining structures, & etc, against impact of kinetic missiles generated both accidentally and deliberately such as dynamic loading, incident occurs in nuclear plants, terrorist attack, Natural disasters like tsunami and etc., in various impact and blast scenarios for both civilian and military activities. In many cases, projectiles can be treated as rigid bodies when their damage and erosion are not severe. Due to the intricacy of the local impact damages, investigations are generally based on experimental data. Conclusions of the experimental observations are then used to guide engineering models. Local damages studies normally fall into three categories, i.e. empirical formulae based on data fitting, idealised analytical models based on physic laws and numerical simulations based on computational mechanics and material models. In the present study, 2D asymmetrical numerical simulation have done on concrete slab against the impact of  ogive nose hard missile of 26.90mm and 76.20mm diameter with CRH ratio 2.0 and 6.0 respectively, for penetration by using Concrete Damaged Plasticity Model, and ABAQUS/Explicit dynamic analysis in ABAQUS. It is found that the strains/stresses are induced in the concrete slab and a very nicely propagation of the stresses inside the  concrete slab in the form of waves, which is a clear indication for vibrations of the concrete. The lack of failure criterion in concrete damaged plasticity model does not allow the removal of elements during the analyses. This means that spalling, scabbing, and perforation cannot be modelled with the Concrete Damage Plasticity Model. The penetration depth results shows that the deeper penetration requires higher critical impact kinetic energies, and comparison shows the simulation results are more accurate

  20. Dielectric THz waveguides

    Science.gov (United States)

    Dupuis, Alexandre

    In this thesis we have explored a wide variety of dielectric waveguides that rely on many different waveguiding mechanisms to guide THz (far-infrared) radiation. We have explored both theoretically and experimentally a large number of waveguide designs with the aim of reducing propagation and bending losses. The different waveguides can be classified into two fundamentally different strategies for reducing the propagation loss: small-core single-mode evanescent-field fibers or large hollow-core multi-mode tubes. Our focus was first set on exploring the small-core evanescent-field fiber strategy for reducing propagation losses. Following initial theoretical work in our group, much effort was spent on the fabrication and measurement of evanescent porous subwavelength diameter plastic fibers, in an attempt to further reduce the propagation losses. The fabrication of such fibers is a challenge and many novel techniques were devised to enable fiber drawing without hole collapse. The first method sealed the holes of an assembly of polymer tubes and lead to fibers of relatively low porosity (˜25% air within the core) due to reduction in hole size during fiber drawing. The second method was a novel sacrificial polymer technique whereby drawing a completely solid fiber prevented any hole collapse and the subsequent dissolution of the sacrificial polymer revealed the holes in the fiber. The third method was a combination of preform casting using glass molds and drawing with pressurized air within the holes. This led to fibers of record porosity (86% air). The measurement of these porous fibers began with a collaboration with a group from the university of Sherbrooke. At the time, the only available detector was a frequency integrating liquid-helium-cooled bolometer (powermeter). A novel directional coupler method for measuring the losses of subwavelength fibers was developed whereby an evanescent coupler is formed by bringing a probe fiber in proximity to the sample fiber

  1. The study of the transition regime between slab and mixed slab-toroidal electron temperature gradient modes in a basic experiment

    Energy Technology Data Exchange (ETDEWEB)

    Balbaky, Abed; Sokolov, Vladimir; Sen, Amiya K. [Plasma Research Laboratory, Columbia University, New York, New York 10027 (United States)

    2015-05-15

    Electron temperature gradient (ETG) modes are suspected sources of anomalous electron thermal transport in magnetically confined plasmas as in tokamaks. Prior work in the Columbia Linear Machine (CLM) has been able to produce and identify slab ETG modes in a slab geometry [Wei et al., Phys. Plasmas 17, 042108 (2010)]. Now by modifying CLM to introduce curvature to the confining axial magnetic field, we have excited mixed slab-toroidal modes. Linear theory predicts a transition between slab and toroidal ETG modes when (k{sub ∥}R{sub c})/(k{sub y}ρ) ∼1 [J. Kim and W. Horton, Phys. Fluids B 3, 1167 (1991)]. We observe changes in the mode amplitude for levels of curvature R{sub c}{sup −1}≪(k{sub ∥,slab})/(k{sub ⊥}ρ) , which may be explained by reductions in k{sub ∥} in the transition from slab to mixed slab-toroidal modes, as also predicted by theory. We present mode amplitude scaling as a function of magnetic field curvature. Over the range of curvature available in CLM experimentally we find a modest increase in saturated ETG potential fluctuations (∼1.5×), and a substantial increase in the power density of individual mode peaks (∼4–5×)

  2. Numerical Analysis of Secondary Cooling in Continuous Slab Casting

    Institute of Scientific and Technical Information of China (English)

    Kee-Hyeon Cho; Byung-Moon Kim

    2008-01-01

    In the present study, a numerical optimization program has been developed for predicting the optimal secondary cooling patterns in a continuous slab caster. Optimization strategy using Broydon-Fletcher-Goldfarb-Shanno (BFGS) method is carried out by determining the constant heat transfer coefficients in each spray zone, which could satisfy the casting conditions and metallurgical criteria specified by the engineer. From the present results, it is found that even a slight variation in the pouring temperature, allowable surface temperature, and casting speed could give rise to the changes in the cooling pattern throughout the spray zones.

  3. Effect of Rotation in an Orthotropic Elastic Slab

    Directory of Open Access Journals (Sweden)

    Santra S.

    2017-02-01

    Full Text Available The fundamental equations of the two dimensional generalized thermoelasticity (L-S model with one relaxation time parameter in orthotropic elastic slab has been considered under effect of rotation. The normal mode analysis is used to the basic equations of motion and heat conduction equation. Finally, the resulting equations are written in the form of a vector-matrix differential equation which is then solved by the eigenvalue approach. The field variables in the space time domain are obtained numerically. The results corresponding to the cases of conventional thermoelasticity CTE, extended thermoelasticity (ETE and temperature rate dependent thermoelasticity (TRDTE are compared by means of graphs.

  4. Second-harmonic generation from hyperbolic plasmonic nanorod metamaterial slab

    CERN Document Server

    Marino, Giuseppe; Krasavin, Alexey V; Ginzburg, Pavel; Olivier, Nicolas; Wurtz, Gregory A; Zayats, Anatoly V

    2015-01-01

    Hyperbolic plasmonic metamaterials provide numerous opportunities for designing unusual linear and nonlinear optical properties. We show that the modal overlap of fundamental and second-harmonic light in an anisotropic plasmonic metamaterial slab results in the broadband enhancement of radiated second-harmonic intensity by up to 2 and 11 orders of magnitudes for TM- and TE-polarized fundamental light, respectively, compared to a smooth Au film under TM-polarised illumination. The results open up possibilities to design tuneable frequency-doubling metamaterial with the goal to overcome limitations associated with classical phase matching conditions in thick nonlinear crystals.

  5. Development of Flexible Link Slabs using Ductile Fiber Reinforced Concrete

    DEFF Research Database (Denmark)

    Lárusson, Lárus Helgi

    emphasis oncrack formation and development at the rebar-matrix interface during direct tensile loading. Utilizing a high definition DIC technique in a novel approach, detailed measurements of the crack formation and debonding process are obtained. It is found that ductile ECC, in contrast to conventional...... two adjacent bridge deck segments. The link slab element, composed of GFRP reinforced ECC,exhibited the same tension stiffening and tension strengthening behavior with limited crack widths as was observed in the reinforced prisms under monotonic and cyclic loading. The combination of ductile ECC...

  6. Inverse Estimation of Transient Heat Flux to Slab Surface

    Institute of Scientific and Technical Information of China (English)

    CUI Miao; YANG Kai; LIU Yun-fei; GAO Xiao-wei

    2012-01-01

    The transient heat flux was calculated using a model for inverse heat conduction problems based on temper- ature measurements. The unknown heat flux was taken as an optimization variable and solved by minimizing the differences between the calculated temperatures and the measured ones. Several examples were given to show the ef- fectiveness and the accuracy of the inverse algorithm in estimating the transient heat flux to a slab surface. The re sults show that the inverse approach can be applied in the steel industry or in other areas where the target of investi- gation is inaccessible to direct measurements or difficult to be directly modeled.

  7. An Incursion on Punching of Reinforced Concrete Flat Slabs

    Directory of Open Access Journals (Sweden)

    Dan-Vasile Bompa

    2009-01-01

    Full Text Available Starting from the early 60s continuous studies have been made regarding punching of concrete flat slabs. The evolution of technology and calculus systems influenced this engineering branch. Nowadays is possible to account in structural analysis all the non-linear behaviour of reinforced and prestressed concrete and to get the most close structural response in comparison with the real behaviour. As a controversy matter, several tests and theories have been developed. Nowadays researchers try to find the most accurate and economic formula for punching. This paper purpose is to make a survey on punching classical model and related nonlinear concrete behaviour regarded to this issue.

  8. The Slab Method to Measure the Topological Susceptibility

    OpenAIRE

    2016-01-01

    In simulations of a model with topological sectors, algorithms which proceed in small update steps tend to get stuck in one sector, especially on fine lattices. This distorts the numerical results; in particular it is not straightforward to measure the topological susceptibility chi_t. We test a method to measure chi_t even if configurations from only one sector are available. It is based on the topological charges in sub-volumes, which we denote as "slab". This enables the evaluation of chi_...

  9. The Slab Method to Measure the Topological Susceptibility

    CERN Document Server

    Bietenholz, Wolfgang; de Forcrand, Philippe; Dromard, Arthur; Gerber, Urs

    2016-01-01

    In simulations of a model with topological sectors, algorithms which proceed in small update steps tend to get stuck in one sector, especially on fine lattices. This distorts the numerical results, in particular it is not straightforward to measure the topological susceptibility chi_t. We test a method to measure chi_t even if configurations from only one sector are available. It is based on the topological charges in sub-volumes, which we denote as "slabs". This enables the evaluation of chi_t, as we demonstrate with numerical results for non-linear sigma-models and for 2-flavour QCD.

  10. Subwavelength electromagnetic dynamics in stacked complementary plasmonic crystal slabs.

    Science.gov (United States)

    Iwanaga, Masanobu

    2010-07-19

    Resonant electromagnetic fields in stacked complementary plasmonic crystal slabs (sc-PlCSs) are numerically explored in subwavelength dimensions. It is found that the local plasmon resonances in the sc-PlCSs are composite states of locally enhanced electric and magnetic fields. Two sc-PlCSs are analyzed in this paper and it is shown that each sc-PlCS realizes a resonant electromagnetic state suggested by one of Maxwell equations. It is moreover clarified that the local plasmons open efficient paths of Poynting flux, those result in high-contrast polarized transmission.

  11. CONCRETE PROPERTIES IMPROVEMENT OF SLAB TRACKS USING CHEMICAL ADDITIVES

    Directory of Open Access Journals (Sweden)

    V. V. Pristinskaya

    2015-11-01

    Full Text Available Purpose. On the Railways of Ukraine a very large number of slab tracks are operated with cracks. Many scientific works of previous years are dedicated to improving the design of slab tracks. The main causes of defects are: poor exploitation of the track; insufficient physic-mechanical characteristics of concrete; poor quality of initial materials. It is therefore necessary to develop an optimum concrete mix for the manufacture of these concrete products. Methodology. To assess the impact of individual factors and effects of their interactions on properties of concrete mix and concrete method of experimental and statistical modeling was used. At this, methodological fundamentals of mathematical experiment planning in concrete technology and modern methods of optimization of composite materials were taking into account. Based on the obtained data during the planned experiment conducting, including15 studies and using the computer program MathCad, were obtained the regression equations, which describe the relevant physical and mechanical properties of concrete. On the basis of the equations with the help of computer program MATLAB R2012b the graphs were drawn, illustrating the dependences of system response from the changes of two factors at a fixed value of the third factor. Findings. Firstly was the analysis of cracks that occur in the process of operation in the constructions of slab tracks. Further reasons of possible occurrence of these cracks were presented. In the process of the conducted research the author has concluded that for rational concrete mix development it is necessary to conduct the planned experiment with the use of quality materials. It was established that to increase the strength, chemical additives should be added in to concrete mix, it will let reduce cement amount. Originality. Experiments proved the usage of modern chemical additives in order to improve the properties of concrete. Models were developed, reflecting

  12. Effects of Reinforcement Configuration on Reserve Capacity of Concrete Slabs

    Science.gov (United States)

    1985-08-01

    Reinforced concreted Tensile membrane,, Buried shelters/ Shelters/ ..i, Civil defense, Slab capacity, 120. A34TlRACT rCcnhma in~ r aidit noe..era aad...CHAPTER 1 I XTPODLCT, CI At the- iiti it io., of this Study civil d~efense plwlgcalled for the .;evacuation of nonessenrt*I51 pezrsonnel to safe (lower...lqbal and Derecho (Reference 10). The reinforcement ratio, p , was 0.0062 in "Christianscn’s te,;tts and varied from 0.0023 to 0.0093 in Roberts’ tests

  13. Structure-based coarse-graining in liquid slabs.

    Science.gov (United States)

    Jochum, Mara; Andrienko, Denis; Kremer, Kurt; Peter, Christine

    2012-08-14

    Structure-based coarse-graining relies on matching the pair correlation functions of a reference (atomistic) and a coarse-grained system. As such, it is designed for systems with uniform density distributions. Here, we demonstrate how it can be generalized for inhomogeneous systems by coarse-graining slabs of liquid water and methanol in vacuum, as well as a single benzene molecule at the water-vacuum interface. Our conclusion is that coarse-graining performed in inhomogeneous systems improves thermodynamic properties and the structure of interfaces without significant alterations to the local structure of the bulk liquid.

  14. Tomography of the subducting Pacific slab and the 2015 Bonin deepest earthquake (Mw 7.9)

    Science.gov (United States)

    Zhao, Dapeng; Fujisawa, Moeto; Toyokuni, Genti

    2017-01-01

    On 30 May 2015 an isolated deep earthquake (~670 km, Mw 7.9) occurred to the west of the Bonin Islands. To clarify its causal mechanism and its relationship to the subducting Pacific slab, we determined a detailed P-wave tomography of the deep earthquake source zone using a large number of arrival-time data. Our results show that this large deep event occurred within the subducting Pacific slab which is penetrating into the lower mantle. In the Izu-Bonin region, the Pacific slab is split at ~28° north latitude, i.e., slightly north of the 2015 deep event hypocenter. In the north the slab becomes stagnant in the mantle transition zone, whereas in the south the slab is directly penetrating into the lower mantle. This deep earthquake was caused by joint effects of several factors, including the Pacific slab’s fast deep subduction, slab tearing, slab thermal variation, stress changes and phase transformations in the slab, and complex interactions between the slab and the ambient mantle. PMID:28295018

  15. Cause Analysis on the Void under Slabs of Cement Concrete Pavement

    Science.gov (United States)

    Wen, Li; Zhu, Guo Xin; Baozhu

    2017-06-01

    This paper made a systematic analysis on the influence of the construction, environment, water and loads on the void beneath road slabs, and also introduced the formation process of structural void and pumping void, and summarizes the deep reasons for the bottom of the cement concrete pavement. Based on the analysis above, this paper has found out the evolution law of the void under slabs which claimed that the void usually appeared in the slab corners and then the cross joint, resulting void in the four sides with the void area under the front slab larger than the rear one.

  16. Displacement-based seismic design of flat slab-shear wall buildings

    Science.gov (United States)

    Sen, Subhajit; Singh, Yogendra

    2016-06-01

    Flat slab system is becoming widely popular for multistory buildings due to its several advantages. However, the performance of flat slab buildings under earthquake loading is unsatisfactory due to their vulnerability to punching shear failure. Several national design codes provide guidelines for designing flat slab system under gravity load only. Nevertheless, flat slab buildings are also being constructed in high seismicity regions. In this paper, performance of flat slab buildings of various heights, designed for gravity load alone according to code, is evaluated under earthquake loading as per ASCE/SEI 41 methodology. Continuity of slab bottom reinforcement through column cage improves the performance of flat slab buildings to some extent, but it is observed that these flat slab systems are not adequate in high seismicity areas and need additional primary lateral load resisting systems such as shear walls. A displacement-based method is proposed to proportion shear walls as primary lateral load resisting elements to ensure satisfactory performance. The methodology is validated using design examples of flat slab buildings with various heights.

  17. Flexural Strengthening of RC Slabs Using a Hybrid FRP-UHPC System Including Shear Connector

    Directory of Open Access Journals (Sweden)

    Jiho Moon

    2017-01-01

    Full Text Available A polymeric hybrid composite system made of UHPC and CFRP was proposed as a retrofit system to enhance flexural strength and ductility of RC slabs. While the effectiveness of the proposed system was confirmed previously through testing three full-scale one-way slabs having two continuous spans, the slabs retrofitted with the hybrid system failed in shear. This sudden shear failure would stem from the excessive enhancement of the flexural strength over the shear strength. In this study, shear connectors were installed between the hybrid system and a RC slab. Using simple beam, only positive moment section was examined. Two full-scale RC slabs were cast and tested to failure: the first as a control and the second using this new strengthening technique. The proposed strengthening system increased the ultimate load carrying capacity of the slab by 70%, the stiffness by 60%, and toughness by 128%. The efficiency of shear connectors on ductile behavior of the retrofitted slab was also confirmed. After the UHPC top is separated from the slab, the shear connector transfer shear load and the slab system were in force equilibrium by compression in UHPC and tension in CFRP.

  18. Abnormal seismological and magmatic processes controlled by the tearing South American flat slabs

    Science.gov (United States)

    Hu, Jiashun; Liu, Lijun

    2016-09-01

    The influence of flat slab subduction on the formation of intra-slab earthquakes, volcanic activities and mantle seismic velocity anomalies remains unclear. We attempt to better understand these processes by simulating the two flat slabs in Peru and Chile using data-orientated geodynamic models. Our results successfully reproduce the observed flat slabs as mainly due to two subducting aseismic ridges. In contrast to the traditional view of flat-slab subduction, we find that these slabs are internally torn, as is due to the 3D nature of the subducting buoyancy features. This broken slab configuration, confirmed by regional tomography, naturally explains the abnormal distribution of and stress regimes associated with the intermediate-depth earthquakes. We further show that the slab tearing process could also better explain the formation of adakitic and ore-forming magmatism, the evolution of the magmatic arc, and the enigmatic mantle seismic structures beneath these regions. We propose that slab tearing may represent a common result of buoyancy feature subduction and that the resulting mantle processes could affect the long-term geodynamic evolution of continents.

  19. Optimising the Slab Yard Planning and Crane Scheduling Problem using a two-stage heuristic

    DEFF Research Database (Denmark)

    Hansen, Anders Dohn; Clausen, Jens

    2010-01-01

    In this paper, we present the Slab Yard Planning and Crane Scheduling Problem. The problem has its origin in steel production facilities with a large throughput. A slab yard is used as a buffer for slabs that are needed in the upcoming production. Slabs are transported by cranes and the problem...... tests are run on a generic setup with simulated data. The test results are very promising. The production delays are reduced significantly in the new solutions compared with the corresponding delays observed in a simulation of manual planning....

  20. Tomography of the subducting Pacific slab and the 2015 Bonin deepest earthquake (Mw 7.9)

    Science.gov (United States)

    Zhao, Dapeng; Fujisawa, Moeto; Toyokuni, Genti

    2017-03-01

    On 30 May 2015 an isolated deep earthquake (~670 km, Mw 7.9) occurred to the west of the Bonin Islands. To clarify its causal mechanism and its relationship to the subducting Pacific slab, we determined a detailed P-wave tomography of the deep earthquake source zone using a large number of arrival-time data. Our results show that this large deep event occurred within the subducting Pacific slab which is penetrating into the lower mantle. In the Izu-Bonin region, the Pacific slab is split at ~28° north latitude, i.e., slightly north of the 2015 deep event hypocenter. In the north the slab becomes stagnant in the mantle transition zone, whereas in the south the slab is directly penetrating into the lower mantle. This deep earthquake was caused by joint effects of several factors, including the Pacific slab’s fast deep subduction, slab tearing, slab thermal variation, stress changes and phase transformations in the slab, and complex interactions between the slab and the ambient mantle.

  1. A Comparative Study of Strength of Two-Way Rectangular Slabs with and without Openings

    Science.gov (United States)

    Ravindra, M.; Rakesh, V.; Rambabu, K.

    2016-09-01

    The present work uses yield-line theory to find the strength of uniformly loaded rectangular reinforced concrete slabs with and without rectangular openings. Five positions of openings are considered, i.e. the slab centre, the slab corner, the centre of a short side, the centre of a long side and the opening eccentric to the slab centre. All possible admissible yield line patterns are considered for all given configurations of the slab subjected to uniformly distributed load keeping in view the basic principles of yield line theory. The ratios of the corresponding lengths of the sides of the opening and the slab are different and sizes of opening up to 0.4× the length of the slab sides are considered. Symmetric edge conditions like continuous slab, simply supported, two long sides continuous and two short sides continuous are considered for various sizes of openings in order to plot the design charts for isotropic reinforcement coefficients only. Affine transformation is also performed for slab with openings.

  2. A generalized slab-wise framework for parallel transmit multiband RF pulse design

    Science.gov (United States)

    Wu, Xiaoping; Schmitter, Sebastian; Auerbach, Edward J.; Uğurbil, Kâmil; de Moortele, Pierre-François Van

    2015-01-01

    Purpose We propose a new slab-wise framework to design parallel transmit multi-band pulses for volumetric simultaneous multi-slice imaging with a large field of view along the slice direction (FOVs). Theory and Methods The slab-wise framework divides FOVs into a few contiguous slabs and optimizes pulses for each slab. Effects of relevant design parameters including slab number and transmit B1 (B1+) mapping slice placement were investigated for human brain imaging by designing pulses with global or local SAR control based on electromagnetic simulations of a 7T head RF array. Pulse design using in-vivo B1+ maps was demonstrated and evaluated with Bloch simulations. Results RF performance with respect to SAR reduction or B1+ homogenization across the entire human brain improved with increasing slabs; however, this improvement was non-linear and leveled off at ~12 slabs when the slab thickness reduced to ~12 mm. The impact of using different slice placements for B1+ mapping was small. Conclusion Compared to slice-wise approaches where each of the many imaging slices requires both B1+ mapping and pulse optimization, the proposed slab-wise design framework is shown to attain comparable RF performance while drastically reducing the number of required pulses; therefore, it can be used to increase time efficiency for B1+ mapping, pulse calculation and sequence preparation. PMID:25994797

  3. Dielectric waveguide amplifiers and lasers

    NARCIS (Netherlands)

    Pollnau, Markus

    The performance of semiconductor amplifiers and lasers has made them the preferred choice for optical gain on a micro-chip. In the past few years, we have demonstrated that also rare-earth-ion-doped dielectric waveguides show remarkable performance, ranging from a small-signal gain per unit length

  4. Grounded coplanar waveguide defected ground structure enabled mulitlayered passive circuits

    Science.gov (United States)

    Schlieter, Daniel Benjamin

    Passive circuits are essential to microwave and millimeter-wave (mm-wave) frequency design, especially as new commercial applications emerge for complementary metal-oxide semiconductor (CMOS) integrated circuits. However, it is challenging to design distributed passive circuits for CMOS due to the substrate loss and thin dielectric layers of the back-end-of-line (BEOL). Furthermore, distributed passive circuits need to be adapted for compactness and integration while overcoming these challenges and maintaining high performance. Grounded coplanar waveguide defected ground structures meet this need for compact and integrable passive circuits by utilizing the top and bottom ground planes of the transmission line to implement circuit elements. Defected ground structures (DGS) are distributed elements realized by etching specific patterns into the ground planes of transmission lines. These structures can be used in conjunction with the center conductor of planar transmission lines to reduce circuit size and/or improve performance. By implementing DGS in grounded coplanar waveguide (GCPW) multiple resonances and higher impedances can be achieved. The resonant-based GCPW DGS are more compact than their microstrip and CPW counterparts and fit well into the vertical technology of back-end-of-line CMOS. This research demonstrates up to 80% size reduction at 5.8GHz by realizing spiral-shaped DGS in GCPW and applying the resulting GCPW DGS unit cell to a dual-behavior band-pass filter. The filter has been scaled to 60GHz and realized in a 130nm CMOS process by using floating metal strips to reduce the impact of the lossy silicon substrate. The impedance-based GCPW DGS, called EG-GCPW, have up to a 20:1 impedance ratio on Rogers RT/DuroidRTM 5880 and an impedance ratio of 15:1 on a benzocyclobutene post-CMOS process. These high impedance ratios increased the power division ratio of an unequal Wilkinson power divider to 7:1 and reduced the size of a stepped impedance low

  5. Entirely soft dielectric elastomer robots

    Science.gov (United States)

    Henke, E.-F. Markus; Wilson, Katherine E.; Anderson, Iain A.

    2017-04-01

    Multifunctional Dielectric Elastomer (DE) devices are well established as actuators, sensors and energy har- vesters. Since the invention of the Dielectric Elastomer Switch (DES), a piezoresistive electrode that can directly switch charge on and off, it has become possible to expand the wide functionality of DE structures even more. We show the application of fully soft DE subcomponents in biomimetic robotic structures. It is now possible to couple arrays of actuator/switch units together so that they switch charge between them- selves on and off. One can then build DE devices that operate as self-controlled oscillators. With an oscillator one can produce a periodic signal that controls a soft DE robot - a DE device with its own DE nervous system. DESs were fabricated using a special electrode mixture, and imprinting technology at an exact pre-strain. We have demonstrated six orders of magnitude change in conductivity within the DES over 50% strain. The control signal can either be a mechanical deformation from another DE or an electrical input to a connected dielectric elastomer actuator (DEA). We have demonstrated a variety of fully soft multifunctional subcomponents that enable the design of autonomous soft robots without conventional electronics. The combination of digital logic structures for basic signal processing, data storage in dielectric elastomer flip-flops and digital and analogue clocks with adjustable frequencies, made of dielectric elastomer oscillators (DEOs), enables fully soft, self-controlled and electronics-free robotic structures. DE robotic structures to date include stiff frames to maintain necessary pre-strains enabling sufficient actuation of DEAs. Here we present a design and production technology for a first robotic structure consisting only of soft silicones and carbon black.

  6. Analysis of overvoltages in overhead ground wires of extra high voltage (EHV) power transmission line under single-phase-to-ground faults

    NARCIS (Netherlands)

    Dudurych, [No Value; Rosolowski, E

    2000-01-01

    Overhead ground wires (GW) of extra high voltage (EHV) power transmission lines, apart from lightning-induced overvoltage protection are frequently used for carrier-current communication. In this case the ground wires are suspended on insulators, the dielectric strength of which should be sufficient

  7. Planned High-gradient Flat-beam-driven Dielectric Wakefield Experiments at the Fermilab’s Advanced Superconducting Test Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Lemery, Francois [NICADD, DeKalb; Mihalcea, Daniel [NICADD, DeKalb; Piot, Philippe [Fermilab; Zhu, Jun [Mianyang CAEP

    2014-07-01

    In beam driven dielectric wakefield acceleration (DWA), high-gradient short-wavelength accelerating fields are generally achieved by employing dielectric-lined waveguides (DLWs)  with small aperture which constraints the beam sizes. In this paper we investigate the possibility of using a low-energy (50-MeV) flat beams to induce high-gradient wakes in a slab-symmetric DLW. We demonstrate via numerical simulations the possibility to produce axial electric field with peak amplitude close to 0.5 GV/m. Our studies are carried out using the Fermilab's Advanced Superconducting Test Accelerator (ASTA) photoinjector beamline. We finally discuss a possible experiment that could be performed in the ASTA photoinjector and eventually at higher energies.  

  8. Intrinsic microwave dielectric loss of lanthanum aluminate.

    Science.gov (United States)

    Shimada, Takeshi; Ichikawa, Koji; Minemura, Tetsuro; Yamauchi, Hiroki; Utsumi, Wataru; Ishii, Yoshinobu; Breeze, Jonathan; Alford, Neil McN

    2010-10-01

    The intrinsic dielectric properties of LaAlO₃ were investigated to understand the microwave properties of several materials containing LaAlO₃. In this study, LaAlO₃ single crystals were prepared by the Czochralski method. The temperature dependence of the dielectric properties and neutron inelastic scattering of the single crystals were measured. From these data, the intrinsic dielectric properties were evaluated and it was found that the dielectric loss of the LaAlO₃ includes two types of dielectric loss. One is a phonon absorption-related loss and the other is a component of the loss arising from Debye- type orientation polarization. The latter affects the room temperature dielectric loss in materials containing LaAlO₃. The present study suggests that avoiding this polarization loss is an important goal in decreasing the total dielectric loss.

  9. Dielectric barrier discharges in analytical chemistry.

    Science.gov (United States)

    Meyer, C; Müller, S; Gurevich, E L; Franzke, J

    2011-06-21

    The present review reflects the importance of dielectric barrier discharges in analytical chemistry. Special about this discharge is-and in contrast to usual discharges with direct current-that the plasma is separated from one or two electrodes by a dielectric barrier. This gives rise to two main features of the dielectric barrier discharges; it can serve as dissociation and excitation device and as ionization mechanism, respectively. The article portrays the various application fields for dielectric barrier discharges in analytical chemistry, for example the use for elemental detection with optical spectrometry or as ionization source for mass spectrometry. Besides the introduction of different kinds of dielectric barrier discharges used for analytical chemistry from the literature, a clear and concise classification of dielectric barrier discharges into capacitively coupled discharges is provided followed by an overview about the characteristics of a dielectric barrier discharge concerning discharge properties and the ignition mechanism.

  10. Molecular dynamics simulation of liquid water confined inside graphite channels: dielectric and dynamical properties.

    Science.gov (United States)

    Martí, J; Nagy, G; Guàrdia, E; Gordillo, M C

    2006-11-30

    Electric and dielectric properties and microscopic dynamics of liquid water confined between graphite slabs are analyzed by means of molecular dynamics simulations for several graphite-graphite separations at ambient conditions. The electric potential across the interface shows oscillations due to water layering, and the overall potential drop is about -0.28 V. The total dielectric constant is larger than the corresponding value for the bulklike internal region of the system. This is mainly due to the preferential orientations of water nearest the graphite walls. Estimation of the capacitance of the system is reported, indicating large variations for the different adsorption layers. The main trend observed concerning water diffusion is 2-fold: on one hand, the overall diffusion of water is markedly smaller for the closest graphite-graphite separations, and on the other hand, water molecules diffuse in interfaces slightly slower than those in the bulklike internal areas. Molecular reorientational times are generally larger than those corresponding to those of unconstrained bulk water. The analysis of spectral densities revealed significant spectral shifts, compared to the bands in unconstrained water, in different frequency regions, and associated to confinement effects. These findings are important because of the scarce information available from experimental, theoretical, and computer simulation research into the dielectric and dynamical properties of confined water.

  11. Slab waveguide photobioreactors for microalgae based biofuel production.

    Science.gov (United States)

    Jung, Erica Eunjung; Kalontarov, Michael; Doud, Devin F R; Ooms, Matthew D; Angenent, Largus T; Sinton, David; Erickson, David

    2012-10-07

    Microalgae are a promising feedstock for sustainable biofuel production. At present, however, there are a number of challenges that limit the economic viability of the process. Two of the major challenges are the non-uniform distribution of light in photobioreactors and the inefficiencies associated with traditional biomass processing. To address the latter limitation, a number of studies have demonstrated organisms that directly secrete fuels without requiring organism harvesting. In this paper, we demonstrate a novel optofluidic photobioreactor that can help address the light distribution challenge while being compatible with these chemical secreting organisms. Our approach is based on light delivery to surface bound photosynthetic organisms through the evanescent field of an optically excited slab waveguide. In addition to characterizing organism growth-rates in the system, we also show here, for the first time, that the photon usage efficiency of evanescent field illumination is comparable to the direct illumination used in traditional photobioreactors. We also show that the stackable nature of the slab waveguide approach could yield a 12-fold improvement in the volumetric productivity.

  12. IMPROVING THE EFFICIENCY OF MINERAL WOOL SLABS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Perfilov Vladimir Aleksandrovich

    2016-03-01

    Full Text Available The use of thermal insulation materials is an effective method to create an insulating envelope of a building, as well as to reduce energy costs and increase the durability of building structures. The properties of stone wool products and their operational durability is largely determined by the conditions of formation of the mineral wool carpet, uniform distribution of binder and its curing and the heat treatment conditions. Most domestic technologies are aimed at the production of mineral wool products with volume-oriented structure, which is formed using special units: spreader and corrugator placed in a production line. The next step to obtain the optimum structures is the production of dual density slabs. The denser upper layer receives mechanical loads caused by the operating conditions; the lower, less dense, but more thick layer performs the main function - insulation. The dual density slabs are produced on standard lines supplemented with a special unit, which is located in front of the heat treatment camera. Optimization of heat treatment parameters and prediction of the properties of materials is performed using software package.

  13. Trench migration, net rotation and slab mantle coupling

    Science.gov (United States)

    Funiciello, F.; Faccenna, C.; Heuret, A.; Lallemand, S.; Di Giuseppe, E.; Becker, T. W.

    2008-07-01

    Laboratory models have been conducted to improve our understanding of the role that the resistance of the slab to bending and its coupling to the ambient mantle play in subduction dynamics over geological time scales. Our models are set up with a viscous plate of silicone (lithosphere) subducting under negative buoyancy in a viscous layer of glucose syrup (mantle). For our study, the lithosphere/upper mantle viscosity contrast has been systematically varied, from ~ 10 to ~ 10 5 in order to explore the parameter space between weak and strong slab dynamics. We found that subduction is characterized by a retreating mode for viscosity ratios > 10 4, by the coexistence of a retreating mode and an advancing mode for viscosity ratios between ~ 10 4 and ~ 10 2, and quasi-stationary, Rayleigh-Taylor like behaviour for ratios < 10 2. By combining our experimental results and kinematic data from current subduction zones in four reference frames which differ in the amount of net rotation, we infer that a lithosphere/upper mantle viscosity contrast of 150-500 is necessary to obtain realistic trench/subducting plate velocity ratios as well as the variability of subduction styles observed in nature.

  14. Spike-and-Slab Sparse Coding for Unsupervised Feature Discovery

    CERN Document Server

    Goodfellow, Ian J; Bengio, Yoshua

    2012-01-01

    We consider the problem of using a factor model we call {\\em spike-and-slab sparse coding} (S3C) to learn features for a classification task. The S3C model resembles both the spike-and-slab RBM and sparse coding. Since exact inference in this model is intractable, we derive a structured variational inference procedure and employ a variational EM training algorithm. Prior work on approximate inference for this model has not prioritized the ability to exploit parallel architectures and scale to enormous problem sizes. We present an inference procedure appropriate for use with GPUs which allows us to dramatically increase both the training set size and the amount of latent factors. We demonstrate that this approach improves upon the supervised learning capabilities of both sparse coding and the ssRBM on the CIFAR-10 dataset. We evaluate our approach's potential for semi-supervised learning on subsets of CIFAR-10. We demonstrate state-of-the art self-taught learning performance on the STL-10 dataset and use our m...

  15. ROBUST RVM BASED ON SPIKE-SLAB PRIOR

    Institute of Scientific and Technical Information of China (English)

    Ding Xinghao; Mi Zengyuan; Huang Yue; Jin Wenbo

    2012-01-01

    Although Relevance Vector Machine (RVM) is the most popular algorithms in machine learning and computer vision,outliers in the training data make the estimation unreliable.In the paper,a robust RVM model under non-parametric Bayesian framework is proposed.We decompose the noise term in the RVM model into two components,a Gaussian noise term and a spiky noise term.Therefore the observed data is assumed represented as:y=Dw+s+e,where Dw is the relevance vector component,of which D is the kernel function matrix and w is the weight matrix,s is the spiky term and e is the Gaussian noise term.A spike-slab sparse prior is imposed on the weight vector w,which gives a more intuitive constraint on the sparsity than the Student's t-distribution described in the traditional RVM.For the spiky component s,a spike-slab sparse prior is also introduced to recognize outliers in the training data effectively.Several experiments demonstrate the better performance over the RVM regression.

  16. Oscillating Casimir force between two slabs in a Fermi sea

    Institute of Scientific and Technical Information of China (English)

    Chen Li-Weia; Su Guo-Zhen; Chen Jin-Can; Andresen Bjarne

    2012-01-01

    The Casimir effect for two parallel slabs immersed in an ideal Fermi sea is investigated at both zero and nonzero temperatures.It is found that the Casimir effect in a Fermi gas is distinctly different from that in an electromagnetic field or a massive Bose gas.In contrast to the familiar result that the Casimir force decreases monotonically with the increase of the separation L between two slabs in an electromagnetic field and a massive Bose gas,the Casimir force in a Fermi gas oscillates as a function of L.The Casimir force can be either attractive or repulsive,depending sensitively on the magnitude of L. In addition,it is found that the amplitude of the Casimir force in a Fermi gas decreases with the increase of the temperature,which also is contrary to the case in a Bose gas,since the bosonic Casimir force increases linearly with the increase of the temperature in the region T < Tc,where Tc is the critical temperature of the Bose-Einstein condensation.

  17. MODELING OF TRANSIENT HEAT TRANSFER IN FOAMED CONCRETE SLAB

    Directory of Open Access Journals (Sweden)

    MD AZREE OTHUMAN MYDIN

    2013-06-01

    Full Text Available This paper reports the basis of one-dimensional Finite Difference method to obtain thermal properties of foamed concrete in order to solve transient heat conduction problems in multi-layer panels. In addition, this paper also incorporates the implementation of the method and the validation of thermal properties model of foamed concrete. A one-dimensional finite difference heat conduction programme has been developed to envisage the temperature development through the thickness of the foamed concrete slab, based on an initial estimate of the thermal conductivity-temperature relationship as a function of porosity and radiation within the voids. The accuracy of the model was evaluated by comparing predicted and experimental temperature profiles obtained from small scale heat transfer test on foamed concrete slabs, so that the temperature history of the specimen calculated by the programme closely matches those recorded during the experiment. Using the thermal properties of foamed concrete, the validated heat transfer program predicts foamed concrete temperatures in close agreement with experimental results obtained from a number of high temperature tests. The proposed numerical and thermal properties are simple yet efficient and can be utilised to aid manufacturers to develop their products without having to conduct numerous large-scale fire tests.

  18. Descending lithosphere slab beneath the Northwest Dinarides from teleseismic tomography

    Science.gov (United States)

    Šumanovac, Franjo; Dudjak, Darko

    2016-12-01

    The area of study covers the marginal zone between the Adriatic microplate (African plate) and the Pannonian segment (Eurasian plate). We present a tomography model for this area, with special emphasis on the northwest Dinarides. A dense distribution of temporary seismic stations in the area of the Northern Dinarides along with permanent seismic stations located in the area, allowed us to construct this P-wave tomographic model. We assembled our travel-time dataset based on 26 seismic stations were used to collect the dataset. Teleseismic events were recorded for a period of 18 months and a set of 76 distant earthquakes were used to calculate the P-wave travel-time residuals. We calculated relative rather than absolute arrival-time residuals in the inversion to obtain depths of 0-400 km. We imaged a pronounced fast velocity anomaly below the NW Dinarides which directly indicates a lithosphere slab downgoing beneath the Dinarides. This fast anomaly extends towards the NW direction to at least 250 km depth, and we interpreted it as a descending lithosphere slab. The thrusting of the Adriatic microplate may be brought about by sub-lithosphere rising movement beneath the Pannonian region, along with a push from African plate. In our interpretation, the Adriatic lower lithosphere has been detached from the crust, and steeply sinks beneath the Dinarides. A lithosphere model of the contact between the Adriatic microplate and Pannonian tectonic segment was constructed based on the tomographic velocity model and results of previous crustal studies.

  19. Magnetohydrodynamic stability of natural convection in a vertical porous slab

    Science.gov (United States)

    Shankar, B. M.; Kumar, Jai; Shivakumara, I. S.

    2017-01-01

    The stability of the conduction regime of natural convection in an electrically conducting fluid saturated porous vertical slab is investigated in the presence of a uniform external transverse magnetic field. The flow in the porous medium is described by modified Brinkman-extended Darcy equation with fluid viscosity different from effective viscosity. The boundaries of the vertical porous slab are assumed to be rigid-isothermal and electrically non-conducting. The resulting stability equations are solved numerically using Galerkin method. The critical Grashof number Gc, the critical wave number αc and the critical wave speed cc are computed for a wide range of porous parameter σp, the ratio of effective viscosity to the fluid viscosity Λ, the Prandtl number Pr and the Hartmann number M. Based on these parameters, the stability characteristics of the system are discussed in detail. The presence of advective inertia is to instill instability on the flow in a porous medium and found that the magnetic field, porous parameter and ratio of viscosities have a stabilizing effect on both stationary and oscillatory wave instabilities. Besides, the value of Pr at which transition occurs from stationary to oscillatory mode of instability decreases with increasing M ,σp and Λ .

  20. Two-phase mixed media dielectric with macro dielectric beads for enhancing resistivity and breakdown strength

    Science.gov (United States)

    Falabella, Steven; Meyer, Glenn A; Tang, Vincent; Guethlein, Gary

    2014-06-10

    A two-phase mixed media insulator having a dielectric fluid filling the interstices between macro-sized dielectric beads packed into a confined volume, so that the packed dielectric beads inhibit electro-hydrodynamically driven current flows of the dielectric liquid and thereby increase the resistivity and breakdown strength of the two-phase insulator over the dielectric liquid alone. In addition, an electrical apparatus incorporates the two-phase mixed media insulator to insulate between electrical components of different electrical potentials. And a method of electrically insulating between electrical components of different electrical potentials fills a confined volume between the electrical components with the two-phase dielectric composite, so that the macro dielectric beads are packed in the confined volume and interstices formed between the macro dielectric beads are filled with the dielectric liquid.

  1. Mantle flow and dynamic topography associated with slab window opening: Insights from laboratory models

    Science.gov (United States)

    Guillaume, Benjamin; Moroni, Monica; Funiciello, Francesca; Martinod, Joseph; Faccenna, Claudio

    2010-12-01

    We present dynamically self-consistent mantle-scale laboratory models that have been conducted to improve our understanding of the influence of slab window opening on subduction dynamics, mantle flow and associated dynamic topography over geological time scales. The adopted setup consists of a two-layer linearly viscous system simulating the subduction of a fixed plate of silicone (lithosphere) under negative buoyancy in a viscous layer of glucose syrup (mantle). Our experimental setting is also characterized by a constant-width rectangular window located at the center of a laterally confined slab, modeling the case of the interaction of a trench-parallel spreading ridge with a wide subduction zone. We found that the opening of a slab window does not produce consistent changes of the geometry and the kinematics of the slab. On the contrary, slab-induced mantle circulation, quantified both in the vertical and horizontal sections using the Feature Tracking image analysis technique, is strongly modified. In particular, rollback subduction and the opening of the slab window generate a complex mantle circulation pattern characterized by the presence of poloidal and toroidal components, with the importance of each evolving according to kinematic stages. Mantle coming from the oceanic domain floods through the slab window, indenting the supra-slab mantle zone and producing its deformation without any mixing between mantle portions. The opening of the slab window and the upwelling of sub-slab mantle produce a regional-scale non-isostatic topographic uplift of the overriding plate that would correspond to values ranging between ca. 1 and 5 km in nature. Assuming that our modeling results can be representative of the natural behavior of subduction zones, we compared them to the tectonics and volcanism of the Patagonian subduction zone. We found that the anomalous backarc volcanism that has been developing since the middle Miocene could result from the lateral flow of sub-slab

  2. The role of ridges in the formation and longevity of flat slabs.

    Science.gov (United States)

    Antonijevic, Sanja Knezevic; Wagner, Lara S; Kumar, Abhash; Beck, Susan L; Long, Maureen D; Zandt, George; Tavera, Hernando; Condori, Cristobal

    2015-08-13

    Flat-slab subduction occurs when the descending plate becomes horizontal at some depth before resuming its descent into the mantle. It is often proposed as a mechanism for the uplifting of deep crustal rocks ('thick-skinned' deformation) far from plate boundaries, and for causing unusual patterns of volcanism, as far back as the Proterozoic eon. For example, the formation of the expansive Rocky Mountains and the subsequent voluminous volcanism across much of the western USA has been attributed to a broad region of flat-slab subduction beneath North America that occurred during the Laramide orogeny (80-55 million years ago). Here we study the largest modern flat slab, located in Peru, to better understand the processes controlling the formation and extent of flat slabs. We present new data that indicate that the subducting Nazca Ridge is necessary for the development and continued support of the horizontal plate at a depth of about 90 kilometres. By combining constraints from Rayleigh wave phase velocities with improved earthquake locations, we find that the flat slab is shallowest along the ridge, while to the northwest of the ridge, the slab is sagging, tearing, and re-initiating normal subduction. On the basis of our observations, we propose a conceptual model for the temporal evolution of the Peruvian flat slab in which the flat slab forms because of the combined effects of trench retreat along the Peruvian plate boundary, suction, and ridge subduction. We find that while the ridge is necessary but not sufficient for the formation of the flat slab, its removal is sufficient for the flat slab to fail. This provides new constraints on our understanding of the processes controlling the beginning and end of the Laramide orogeny and other putative episodes of flat-slab subduction.

  3. Processing and properties of large-sized ceramic slabs

    Directory of Open Access Journals (Sweden)

    Fossa, L.

    2010-10-01

    Full Text Available Large-sized ceramic slabs – with dimensions up to 360x120 cm2 and thickness down to 2 mm – are manufactured through an innovative ceramic process, starting from porcelain stoneware formulations and involving wet ball milling, spray drying, die-less slow-rate pressing, a single stage of fast drying-firing, and finishing (trimming, assembling of ceramic-fiberglass composites. Fired and unfired industrial slabs were selected and characterized from the technological, compositional (XRF, XRD and microstructural (SEM viewpoints. Semi-finished products exhibit a remarkable microstructural uniformity and stability in a rather wide window of firing schedules. The phase composition and compact microstructure of fired slabs are very similar to those of porcelain stoneware tiles. The values of water absorption, bulk density, closed porosity, functional performances as well as mechanical and tribological properties conform to the top quality range of porcelain stoneware tiles. However, the large size coupled with low thickness bestow on the slab a certain degree of flexibility, which is emphasized in ceramic-fiberglass composites. These outstanding performances make the large-sized slabs suitable to be used in novel applications: building and construction (new floorings without dismantling the previous paving, ventilated façades, tunnel coverings, insulating panelling, indoor furnitures (table tops, doors, support for photovoltaic ceramic panels.

    Se han fabricado piezas de gran formato, con dimensiones de hasta 360x120 cm, y menos de 2 mm, de espesor, empleando métodos innovadores de fabricación, partiendo de composiciones de gres porcelánico y utilizando, molienda con bolas por vía húmeda, atomización, prensado a baja velocidad sin boquilla de extrusión, secado y cocción rápido en una sola etapa, y un acabado que incluye la adhesión de fibra de vidrio al soporte cerámico y el rectificado de la pieza final. Se han

  4. Tailoring dielectric properties of ferroelectric-dielectric multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Kesim, M. T.; Zhang, J. [Department of Materials Science and Engineering and Institute of Materials Science, University of Connecticut, Storrs, Connecticut 06269 (United States); Cole, M. W. [U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, Maryland 21005 (United States); Misirlioglu, I. B. [Faculty of Engineering and Natural Sciences, Sabancı University, Orhanlı/Tuzla, 34956 Istanbul (Turkey); Alpay, S. P., E-mail: p.alpay@ims.uconn.edu [Department of Materials Science and Engineering and Institute of Materials Science, University of Connecticut, Storrs, Connecticut 06269 (United States); Department of Physics, University of Connecticut, Storrs, Connecticut 06269 (United States)

    2014-01-13

    We develop a nonlinear thermodynamic model for multilayer ferroelectric heterostructures that takes into account electrostatic and electromechanical interactions between layers. We concentrate on the effect of relative layer fractions and in-plane thermal stresses on dielectric properties of Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3}-, BaTiO{sub 3}-, and PbZr{sub 0.2}Ti{sub 0.8}O{sub 3} (PZT)-SrTiO{sub 3} (STO) multilayers on Si and c-sapphire. We show that dielectric properties of such multilayers can be significantly enhanced by tailoring the growth/processing temperature and the STO layer fraction. Our computations show that large tunabilities (∼90% at 400 kV/cm) are possible in carefully designed barium strontium titanate-STO and PZT-STO even on Si for which there exist substantially large in-plane strains.

  5. Measurement of the Dielectric Properties of Volcanic Scoria and Basalt at 9370 MHz

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yongchun; WANG Shijie; OUYANG Ziyuan; LI Xiongyao

    2005-01-01

    Dielectric data for volcanic scoria and basalt on the earth at microwave frequency are extremely sparse, and also crucial for volcanic terrains imaging, and development. In consideration of their similarity to lunar regolith (soils and rocks) in chemical and mineral composition, the dielectric data is significative for passive and active microwave remote sensing on the Moon. This study provides the data about the dielectric properties of three kinds of scoria and two kinds of basalt in China. The method put forward in this paper is also applicable for measuring the dielectric properties of dry rocks and other granular ground materials with low complex dielectric constants. Firstly, the authors measured the ε' and tanδvalues of strip specimens prepared from the mixture of scoria or basalt powder and polythene with the resonant cavity perturbation method at 9370 MHz. Secondly, from the ε' and tanδ values of the mixture, the ε's and ranδs values of solid scoria and basalt were calculated using Lichtenecker's mixture formulae. Finally, the effective complex dielectric constants, ε'e and tanδe, of scoria at different bulk densities were calculated. The results have shown that the ε's and tancδs values of all solid basaltic materials measured (both solid basaltic scoria or basalt) are approximately 7 and 0.05, respectively. With increasing bulk density of scoria, the ε'e and tanδe values of scoria increase significantly.

  6. Dielectric breakdown of cell membranes.

    Science.gov (United States)

    Zimmermann, U; Pilwat, G; Riemann, F

    1974-11-01

    With human and bovine red blood cells and Escherichia coli B, dielectric breakdown of cell membranes could be demonstrated using a Coulter Counter (AEG-Telefunken, Ulm, West Germany) with a hydrodynamic focusing orifice. In making measurements of the size distributions of red blood cells and bacteria versus increasing electric field strength and plotting the pulse heights versus the electric field strength, a sharp bend in the otherwise linear curve is observed due to the dielectric breakdown of the membranes. Solution of Laplace's equation for the electric field generated yields a value of about 1.6 V for the membrane potential at which dielectric breakdown occurs with modal volumes of red blood cells and bacteria. The same value is also calculated for red blood cells by applying the capacitor spring model of Crowley (1973. Biophys. J. 13:711). The corresponding electric field strength generated in the membrane at breakdown is of the order of 4 . 10(6) V/cm and, therefore, comparable with the breakdown voltages for bilayers of most oils. The critical detector voltage for breakdown depends on the volume of the cells. The volume-dependence predicted by Laplace theory with the assumption that the potential generated across the membrane is independent of volume, could be verified experimentally. Due to dielectric breakdown the red blood cells lose hemoglobin completely. This phenomenon was used to study dielectric breakdown of red blood cells in a homogeneous electric field between two flat platinum electrodes. The electric field was applied by discharging a high voltage storage capacitor via a spark gap. The calculated value of the membrane potential generated to produce dielectric breakdown in the homogeneous field is of the same order as found by means of the Coulter Counter. This indicates that mechanical rupture of the red blood cells by the hydrodynamic forces in the orifice of the Coulter Counter could also be excluded as a hemolysing mechanism. The detector

  7. Three-dimensional Casimir force between absorbing multilayer dielectrics

    CERN Document Server

    Raabe, C; Welsch, D G; Raabe, Christian; Kn\\"{o}ll, Ludwig; Welsch, Dirk-Gunnar

    2003-01-01

    Recently the influence of dielectric and geometrical properties on the Casimir force between dispersing and absorbing multilayered plates in the zero-temperature limit has been studied within a 1D quantization scheme for the electromagnetic field in the presence of causal media [R. Esquivel-Sirvent, C. Villarreal, and G.H. Cocoletzi, Phys. Rev. Lett. 64, 052108 (2001)]. In the present paper a rigorous 3D analysis is given, which shows that for complex heterostructures the 1D theory only roughly reflects the dependence of the Casimir force on the plate separation in general. Further, an extension of the very recently derived formula for the Casimir force at zero temperature [M.S. Toma\\v{s}, Phys. Rev. A 66, 052103 (2002)] to finite temperatures is given, and analytical expressions for specific distance laws in the zero-temperature limit are derived. In particular, it is shown that the Casimir force between two single-slab plates behaves asymptotically like $d^{-6}$ in place of $d^{-4}$ ($d$, plate separation).

  8. The impact of slab dip variations, gaps and rollback on mantle wedge flow: insights from fluids experiments

    Science.gov (United States)

    MacDougall, Julia G.; Kincaid, Chris; Szwaja, Sara; Fischer, Karen M.

    2014-05-01

    Observed seismic anisotropy and geochemical anomalies indicate the presence of 3-D flow around and above subducting slabs. To investigate how slab geometry and velocity affect mantle flow, we conducted a set of experiments using a subduction apparatus in a fluid-filled tank. Our models comprise two independently adjustable, continuous belts to represent discrete sections of subducting slabs that kinematically drive flow in the surrounding glucose syrup that represents the upper mantle. We analyse how slab dip (ranging from 30° to 80°), slab dip difference between slab segments (ranging from 20° to 50°), rates of subduction (4-8 cm yr-1) and slab/trench rollback (0-3 cm yr-1) affect mantle flow. Whiskers were used to approximate mineral alignment induced by the flow, as well as to predict directions of seismic anisotropy. We find that dip variations between slab segments generate 3-D flow in the mantle wedge, where the path lines of trenchward moving mantle material above the slab are deflected towards the slab segment with the shallower dip. The degree of path line deflection increases as the difference in slab dip between the segments increases, and, for a fixed dip difference, as slab dip decreases. In cases of slab rollback and large slab dip differences, we observe intrusion of subslab material through the gap and into the wedge. Flow through the gap remains largely horizontal before eventual downward entrainment. Whisker alignment in the wedge flow is largely trench-normal, except near the lateral edges of the slab where toroidal flow dominates. In addition, whisker azimuths located above the slab gap deviate most strongly from trench-normal orientations when slab rollback does not occur. Such flow field complexities are likely sufficient to affect deep melt production and shallow melt delivery. However, none of the experiments produced flow fields that explain the trench-parallel shear wave splitting fast directions observed over broad arc and backarc

  9. 'Grounded' Politics

    DEFF Research Database (Denmark)

    Schmidt, Garbi

    2012-01-01

    play within one particular neighbourhood: Nørrebro in the Danish capital, Copenhagen. The article introduces the concept of grounded politics to analyse how groups of Muslim immigrants in Nørrebro use the space, relationships and history of the neighbourhood for identity political statements....... The article further describes how national political debates over the Muslim presence in Denmark affect identity political manifestations within Nørrebro. By using Duncan Bell’s concept of mythscape (Bell, 2003), the article shows how some political actors idealize Nørrebro’s past to contest the present...

  10. Interaction between a microplasma array and an adjacent dielectric surface

    Science.gov (United States)

    Dzikowski, Sebastian; Schulz-von der Gathen, Volker

    2016-09-01

    Microplasma pixel devices are interesting for applications such as surface modification. A representative is the metal grid array, which is a stable alternative to silicon-based arrays and consists of a dielectric, a grounded electrode and a metal grid with symmetrically arranged cavities. Typically, microplasma arrays are operated close to atmospheric pressure with noble gases like argon and helium. By applying a bipolar triangular voltage waveform with an amplitude of 700 V peak-to-peak and a frequency of 10 kHz to the metal grid, the discharge is ignited in the cavities having a diameter of about 200 and depth of 50 µm. For future applications, such as coating and catalysis, the interaction between the array and a dielectric surface positioned at close distance (emission spectroscopy, the phase dependent expansion of the emission out of the cavities has been observed. Here, we present results of investigations on the dependence of emission structures of the cavities (individually or as group) on pressure, applied voltage and distance between grid and dielectric. Supported by the DFG in the Research Unit FOR1123.

  11. Exploiting dimensionality and defect mitigation to create tunable microwave dielectrics.

    Science.gov (United States)

    Lee, Che-Hui; Orloff, Nathan D; Birol, Turan; Zhu, Ye; Goian, Veronica; Rocas, Eduard; Haislmaier, Ryan; Vlahos, Eftihia; Mundy, Julia A; Kourkoutis, Lena F; Nie, Yuefeng; Biegalski, Michael D; Zhang, Jingshu; Bernhagen, Margitta; Benedek, Nicole A; Kim, Yongsam; Brock, Joel D; Uecker, Reinhard; Xi, X X; Gopalan, Venkatraman; Nuzhnyy, Dmitry; Kamba, Stanislav; Muller, David A; Takeuchi, Ichiro; Booth, James C; Fennie, Craig J; Schlom, Darrell G

    2013-10-24

    The miniaturization and integration of frequency-agile microwave circuits--relevant to electronically tunable filters, antennas, resonators and phase shifters--with microelectronics offers tantalizing device possibilities, yet requires thin films whose dielectric constant at gigahertz frequencies can be tuned by applying a quasi-static electric field. Appropriate systems such as BaxSr1-xTiO3 have a paraelectric-ferroelectric transition just below ambient temperature, providing high tunability. Unfortunately, such films suffer significant losses arising from defects. Recognizing that progress is stymied by dielectric loss, we start with a system with exceptionally low loss--Srn+1TinO3n+1 phases--in which (SrO)2 crystallographic shear planes provide an alternative to the formation of point defects for accommodating non-stoichiometry. Here we report the experimental realization of a highly tunable ground state arising from the emergence of a local ferroelectric instability in biaxially strained Srn+1TinO3n+1 phases with n ≥ 3 at frequencies up to 125 GHz. In contrast to traditional methods of modifying ferroelectrics-doping or strain-in this unique system an increase in the separation between the (SrO)2 planes, which can be achieved by changing n, bolsters the local ferroelectric instability. This new control parameter, n, can be exploited to achieve a figure of merit at room temperature that rivals all known tunable microwave dielectrics.

  12. Exploiting dimensionality and defect mitigation to create tunable microwave dielectrics

    Science.gov (United States)

    Lee, Che-Hui; Orloff, Nathan D.; Birol, Turan; Zhu, Ye; Goian, Veronica; Rocas, Eduard; Haislmaier, Ryan; Vlahos, Eftihia; Mundy, Julia A.; Kourkoutis, Lena F.; Nie, Yuefeng; Biegalski, Michael D.; Zhang, Jingshu; Bernhagen, Margitta; Benedek, Nicole A.; Kim, Yongsam; Brock, Joel D.; Uecker, Reinhard; Xi, X. X.; Gopalan, Venkatraman; Nuzhnyy, Dmitry; Kamba, Stanislav; Muller, David A.; Takeuchi, Ichiro; Booth, James C.; Fennie, Craig J.; Schlom, Darrell G.

    2013-10-01

    The miniaturization and integration of frequency-agile microwave circuits--relevant to electronically tunable filters, antennas, resonators and phase shifters--with microelectronics offers tantalizing device possibilities, yet requires thin films whose dielectric constant at gigahertz frequencies can be tuned by applying a quasi-static electric field. Appropriate systems such as BaxSr1-xTiO3 have a paraelectric-ferroelectric transition just below ambient temperature, providing high tunability. Unfortunately, such films suffer significant losses arising from defects. Recognizing that progress is stymied by dielectric loss, we start with a system with exceptionally low loss--Srn+1TinO3n+1 phases--in which (SrO)2 crystallographic shear planes provide an alternative to the formation of point defects for accommodating non-stoichiometry. Here we report the experimental realization of a highly tunable ground state arising from the emergence of a local ferroelectric instability in biaxially strained Srn+1TinO3n+1 phases with n>=3 at frequencies up to 125GHz. In contrast to traditional methods of modifying ferroelectrics--doping or strain--in this unique system an increase in the separation between the (SrO)2 planes, which can be achieved by changing n, bolsters the local ferroelectric instability. This new control parameter, n, can be exploited to achieve a figure of merit at room temperature that rivals all known tunable microwave dielectrics.

  13. Use of dimensionality to enhance tunable microwave dielectrics

    Science.gov (United States)

    Schlom, D. G.; Lee, Che-Hui; Haislmaier, R.; Vlahos, E.; Gopalan, V.; Birol, T.; Zhu, Y.; Kourkoutis, L. F.; Benedek, N.; Kim, Y.; Brock, J. D.; Muller, D. A.; Fennie, C. J.; Orloff, N. D.; Booth, J. C.; Goian, V.; Kamba, S.; Biegalski, M. D.; Bernhagen, M.; Uecker, R.; Xi, X. X.; Takeuchi, I.

    2012-02-01

    The miniaturization and integration of frequency-agile microwave circuits---tunable filters, resonators, phase shifters and more---with microelectronics offers tantalizing device possibilities, yet requires thin films whose dielectric constant at GHz frequencies can be tuned by applying a quasi-static electric field. Appropriate systems, e.g., BaxSr1-xTiO3, have a paraelectric-to-ferroelectric transition just below ambient temperature, providing high tunability. Unfortunately such films suffer significant losses arising from defects. Recognizing that progress is stymied by dielectric loss, we start with a system with exceptionally low loss---Srn+1TinO3n+1 phases---where in-plane crystallographic shear (SrO)2 faults provide an alternative to point defects for accommodating non-stoichiometry. In this talk we will establish both experimentally and theoretically the emergence of a ferroelectric and highly tunable ground state in biaxially strained Srn+1TinO3n+1 phases with n>=3 at frequencies up to 40 GHz. With increasing n the (SrO)2 faults are separated further than the ferroelectric coherence length perpendicular to the in-plane polarization, enabling tunability with a figure of merit at room temperature that rivals all known tunable microwave dielectrics.

  14. Experimental validation of systematically designed acoustic hyperbolic meta material slab exhibiting negative refraction

    DEFF Research Database (Denmark)

    Christiansen, Rasmus Ellebæk; Sigmund, Ole

    2016-01-01

    This Letter reports on the experimental validation of a two-dimensional acoustic hyperbolic metamaterial slab optimized to exhibit negative refractive behavior. The slab was designed using a topology optimization based systematic design method allowing for tailoring the refractive behavior. The e...

  15. Internal deformation of the subducted Nazca slab inferred from seismic anisotropy

    Science.gov (United States)

    Eakin, Caroline M.; Long, Maureen D.; Scire, Alissa; Beck, Susan L.; Wagner, Lara S.; Zandt, George; Tavera, Hernando

    2016-01-01

    Within oceanic lithosphere a fossilized fabric is often preserved originating from the time of plate formation. Such fabric is thought to form at the mid-ocean ridge when olivine crystals align with the direction of plate spreading. It is unclear, however, whether this fossil fabric is preserved within slabs during subduction or overprinted by subduction-induced deformation. The alignment of olivine crystals, such as within fossil fabrics, can generate anisotropy that is sensed by passing seismic waves. Seismic anisotropy is therefore a useful tool for investigating the dynamics of subduction zones, but it has so far proved difficult to observe the anisotropic properties of the subducted slab itself. Here we analyse seismic anisotropy in the subducted Nazca slab beneath Peru and find that the fast direction of seismic wave propagation aligns with the contours of the slab. We use numerical modelling to simulate the olivine fabric created at the mid-ocean ridge, but find it is inconsistent with our observations of seismic anisotropy in the subducted Nazca slab. Instead we find that an orientation of the olivine crystal fast axes aligned parallel to the strike of the slab provides the best fit, consistent with along-strike extension induced by flattening of the slab during subduction (A. Kumar et al., manuscript in preparation). We conclude that the fossil fabric has been overprinted during subduction and that the Nazca slab must therefore be sufficiently weak to undergo internal deformation.

  16. Juan de Fuca slab geometry and its relation to Wadati-Benioff zone seismicity

    Science.gov (United States)

    McCrory, Patricia A.; Blair, J. Luke; Waldhause, Felix; Oppenheimer, David H.

    2012-01-01

    A new model of the subducted Juan de Fuca plate beneath western North America allows first-order correlations between the occurrence of Wadati-Benioff zone earthquakes and slab geometry, temperature, and hydration state. The geo-referenced 3D model, constructed from weighted control points, integrates depth information from earthquake locations and regional seismic velocity studies. We use the model to separate earthquakes that occur in the Cascadia forearc from those that occur within the underlying Juan de Fuca plate and thereby reveal previously obscured details regarding the spatial distribution of earthquakes. Seismicity within the slab is most prevalent where the slab is warped beneath northwestern California and western Washington suggesting that slab flexure, in addition to expected metamorphic dehydration processes, promotes earthquake occurrence within the subducted oceanic plate. Earthquake patterns beneath western Vancouver Island are consistent with slab dehydration processes. Conversely, the lack of slab earthquakes beneath western Oregon is consistent with an anhydrous slab. Double-differenced relocated seismicity resolves a double seismic zone within the slab beneath northwestern California that strongly constrains the location of the plate interface and delineates a cluster of seismicity 10 km above the surface that includes the 1992 M7.1 Mendocino earthquake. We infer that this earthquake ruptured a surface within the Cascadia accretionary margin above the Juan de Fuca plate. We further speculate that this earthquake is associated with a detached fragment of former Farallon plate. Other subsurface tectonic elements within the forearc may have the potential to generate similar damaging earthquakes.

  17. Calculation of shear strength of prestressed hollow core slabs by use of plastic theory

    DEFF Research Database (Denmark)

    Hoang, Linh Cao; Jørgensen, Henrik Brøner; Nielsen, Mogens Peter

    2014-01-01

    saw-cut into units with the desirable length. For this reason, hollow core slabs are usually not shear reinforced and anchorage of the prestressing strands has to be established by bond. Hollow core slabs may therefore be more critical to shear and Anchorage failure than ordinary two-way spanning...

  18. Calculation of shear strength of prestressed hollow core slabs by use of plastic theory

    DEFF Research Database (Denmark)

    Hoang, Linh Cao; Jørgensen, H.G.; Nielsen, Mogens Peter

    2014-01-01

    saw-cut into units with the desirable length. For this reason, hollow core slabs are usually not shear reinforced and anchorage of the prestressing strands has to be established by bond. Hollow core slabs may therefore be more critical to shear and anchorage failure than ordinary two-way spanning...

  19. Automated grading of wood-slabs. The development of a prototype system

    DEFF Research Database (Denmark)

    Ersbøll, Bjarne Kjær; Conradsen, Knut

    1992-01-01

    , etc. Based on the relative distribution of these detected defects on the surface of a given slab, the slab is further classified into 5 quality grades: prime, standard, flamy, extra flamy and rejects. As a result of this project, a prototype for the computer vision grading system has been built...

  20. Strong suppression of radiation states in a slab waveguide sandwiched between omnidirectional mirrors

    NARCIS (Netherlands)

    Hoekstra, H.J.W.M.; Yudistira, D.; Stoffer, R.

    2005-01-01

    Structures in channel or slab waveguides, applied deliberately or due to imperfections, may lead to strong modal losses, corresponding to the excitation of radiation modes. As an example, losses are generally very large in slab photonic crystal (PhC) impurity waveguides (WGs) due to the combined eff