WorldWideScience

Sample records for ground vehicle identification

  1. Ground Vehicle Robotics

    Science.gov (United States)

    2013-08-20

    Ground Vehicle Robotics Jim Parker Associate Director, Ground Vehicle Robotics UNCLASSIFIED: Distribution Statement A. Approved for public...DATE 20 AUG 2013 2. REPORT TYPE Briefing Charts 3. DATES COVERED 09-05-2013 to 15-08-2013 4. TITLE AND SUBTITLE Ground Vehicle Robotics 5a...Willing to take Risk on technology -User Evaluated -Contested Environments -Operational Data Applied Robotics for Installation & Base Ops -Low Risk

  2. Ground Vehicle Robotics Presentation

    Science.gov (United States)

    2012-08-14

    Mr. Jim Parker Associate Director Ground Vehicle Robotics Distribution Statement A. Approved for public release Report Documentation Page...Briefing 3. DATES COVERED 01-07-2012 to 01-08-2012 4. TITLE AND SUBTITLE Ground Vehicle Robotics Presentation 5a. CONTRACT NUMBER 5b. GRANT...ABSTRACT Provide Transition-Ready, Cost-Effective, and Innovative Robotics and Control System Solutions for Manned, Optionally-Manned, and Unmanned

  3. Multi-spectral synthetic image generation for ground vehicle identification training

    Science.gov (United States)

    May, Christopher M.; Pinto, Neil A.; Sanders, Jeffrey S.

    2016-05-01

    There is a ubiquitous and never ending need in the US armed forces for training materials that provide the warfighter with the skills needed to differentiate between friendly and enemy forces on the battlefield. The current state of the art in battlefield identification training is the Recognition of Combat Vehicles (ROC-V) tool created and maintained by the Communications - Electronics Research, Development and Engineering Center Night Vision and Electronic Sensors Directorate (CERDEC NVESD). The ROC-V training package utilizes measured visual and thermal imagery to train soldiers about the critical visual and thermal cues needed to accurately identify modern military vehicles and combatants. This paper presents an approach to augment the existing ROC-V imagery database with synthetically generated multi-spectral imagery that will allow NVESD to provide improved training imagery at significantly lower costs.

  4. TARDEC Ground Vehicle Robotics

    Science.gov (United States)

    2013-05-30

    UNCLASSIFIED UNCLASSIFIED 10 Optionally Manned Vehicles OMV can be driven by a soldier; OMV can drive a soldier; OMV can be remotely operated; OMV can be...all missions for OMV (i.e. shared driving) (i.e. remotely operated) 2 m od al iti es Mission Payloads UNCLASSIFIED UNCLASSIFIED 11 Ground

  5. Test and Evaluation of Autonomous Ground Vehicles

    OpenAIRE

    Yang Sun; Guangming Xiong; Weilong Song; Jianwei Gong; Huiyan Chen

    2014-01-01

    A preestablished test and evaluation system will benefit the development of autonomous ground vehicles. This paper proposes a design method for a scientific and comprehensive test and evaluation system for autonomous ground vehicles competitions. It can better guide and regulate the development of China’s autonomous ground vehicles. The test and evaluation system includes the test contents, the test environment, the test methods, and the evaluation methods. Using a hierarchical design approac...

  6. Calculation of ground vibration spectra from heavy military vehicles

    Science.gov (United States)

    Krylov, V. V.; Pickup, S.; McNuff, J.

    2010-07-01

    The demand for reliable autonomous systems capable to detect and identify heavy military vehicles becomes an important issue for UN peacekeeping forces in the current delicate political climate. A promising method of detection and identification is the one using the information extracted from ground vibration spectra generated by heavy military vehicles, often termed as their seismic signatures. This paper presents the results of the theoretical investigation of ground vibration spectra generated by heavy military vehicles, such as tanks and armed personnel carriers. A simple quarter car model is considered to identify the resulting dynamic forces applied from a vehicle to the ground. Then the obtained analytical expressions for vehicle dynamic forces are used for calculations of generated ground vibrations, predominantly Rayleigh surface waves, using Green's function method. A comparison of the obtained theoretical results with the published experimental data shows that analytical techniques based on the simplified quarter car vehicle model are capable of producing ground vibration spectra of heavy military vehicles that reproduce basic properties of experimental spectra.

  7. Test and Evaluation of Autonomous Ground Vehicles

    Directory of Open Access Journals (Sweden)

    Yang Sun

    2014-01-01

    Full Text Available A preestablished test and evaluation system will benefit the development of autonomous ground vehicles. This paper proposes a design method for a scientific and comprehensive test and evaluation system for autonomous ground vehicles competitions. It can better guide and regulate the development of China's autonomous ground vehicles. The test and evaluation system includes the test contents, the test environment, the test methods, and the evaluation methods. Using a hierarchical design approach, the test content is designed to be stage by stage, moving from simplicity to complexity and from individual modules to the entire vehicle. The hierarchical test environment is established according to the levels of test content. The test method based on multilevel platforms and sensors is put forward to ensure the accuracy of test results. A fuzzy comprehensive evaluation method combined with analytic hierarchy process (AHP is used for the comprehensive evaluation which can quantitatively evaluate the individual module and the overall technical performance of autonomous ground vehicles. The proposed test and evaluation system has been successfully applied to real autonomous ground vehicle competitions.

  8. 越野环境中无人驾驶车的障碍目标识别%Obstacle Identification in Cross-Country Environment for Unmanned Ground Vehicles

    Institute of Scientific and Technical Information of China (English)

    赵一兵; 郭烈; 张明恒; 李琳辉

    2011-01-01

    针对无人驾驶车环境感知技术,基于D-S证据理论融合多传感器信息,旨在解决障碍物身份识别技术难点.基于CCD和激光传感器建立信息融合系统,并提取每种障碍物的5个特征证据,包括距离对比度特征、平行四边形特征、边缘形状特征、灰度纹理特征和颜色特征.再根据目标类型和环境加权系数选择经验公式,通过模糊插值法求取身份隶属度近似获得各特征对目标的相关系数构造基本概率赋值函数.最后制定Dempster组合规则,融合多传感器特征信息识别障碍身份.试验表明本文方法能够准确有效地获取基本概率赋值函数,D-S证据理论融合方法提高了障碍物身份识别的准确性和鲁棒性.%Autonomous navigation in cross-country environments presents many new challenges including obstacle perception for unmanned ground vehicle. A new method suitable for recognizing obstacle is proposed. The first step is to build the sensor fusion system by using sensors such as CCD and ladar, then to extract five different types of features, including distance contrast, parallelogram rate, edge-shape-factor, gray texture and HSV value. The experiment formula is selected according to the types of obstacle and weight efficiency to calculate basic probability assignment (BPA). The subordinatien to each event in identification framework is obtained by using the fuzzy interpolation. It is supposed that the subordination is equal to correlation coefficient in the formula. Finally, dempster rules are used to integrate sensors information and the obstacle is recognized based on the D-S theory of evidence. The test results indicate that the resolution of BPA is correct, thus improving the validity and robustness of cross-country environment perception based on the new method.

  9. Ground Processing Affordability for Space Vehicles

    Science.gov (United States)

    Ingalls, John; Scott, Russell

    2011-01-01

    Launch vehicles and most of their payloads spend the majority of their time on the ground. The cost of ground operations is very high. So, why so often is so little attention given to ground processing during development? The current global space industry and economic environment are driving more need for efficiencies to save time and money. Affordability and sustainability are more important now than ever. We can not continue to treat space vehicles as mere science projects. More RLV's (Reusable Launch Vehicles) are being developed for the gains of reusability which are not available for ELV's (Expendable Launch Vehicles). More human-rated vehicles are being developed, with the retirement of the Space Shuttles, and for a new global space race, yet these cost more than the many unmanned vehicles of today. We can learn many lessons on affordability from RLV's. DFO (Design for Operations) considers ground operations during design, development, and manufacturing-before the first flight. This is often minimized for space vehicles, but is very important. Vehicles are designed for launch and mission operations. You will not be able to do it again if it is too slow or costly to get there. Many times, technology changes faster than space products such that what is launched includes outdated features, thus reducing competitiveness. Ground operations must be considered for the full product Lifecycle, from concept to retirement. Once manufactured, launch vehicles along with their payloads and launch systems require a long path of processing before launch. Initial assembly and testing always discover problems to address. A solid integration program is essential to minimize these impacts, as was seen in the Constellation Ares I-X test rocket. For RLV's, landing/recovery and post-flight turnaround activities are performed. Multi-use vehicles require reconfiguration. MRO (Maintenance, Repair, and Overhaul) must be well-planned--- even for the unplanned problems. Defect limits and

  10. Ground Vehicle Navigation Using Magnetic Field Variation

    Science.gov (United States)

    Shockley, Jeremiah A.

    The Earth's magnetic field has been the bedrock of navigation for centuries. The latest research highlights the uniqueness of magnetic field measurements based on position due to large scale variations as well as localized perturbations. These observable changes in the Earth's magnetic field as a function of position provide distinct information which can be used for navigation. This dissertation describes ground vehicle navigation exploiting variation in Earth's magnetic field using a self-contained navigation system consisting of only a magnetometer and magnetic field maps. In order to achieve navigation, effective calibration enables repeatable magnetic field measurements from different vehicles and facilitates mapping of the observable magnetic field as a function of position. A new modified ellipsoid calibration technique for strapdown magnetometers in large vehicles is described, as well as analysis of position measurement generation comparing a multitude of measurement compositions using existing and newly developed likelihood techniques. Finally, navigation solutions are presented using both a position measurement and direct incorporation of the magnetometer measurements via a particle filter to demonstrate road navigation in three different environments. Emphatically, the results affirm that navigation using magnetic field variation in ground vehicles is viable and achieves adequate performance for road level navigation.

  11. Unmanned ground vehicles for integrated force protection

    Science.gov (United States)

    Carroll, Daniel M.; Mikell, Kenneth; Denewiler, Thomas

    2004-09-01

    The combination of Command and Control (C2) systems with Unmanned Ground Vehicles (UGVs) provides Integrated Force Protection from the Robotic Operation Command Center. Autonomous UGVs are directed as Force Projection units. UGV payloads and fixed sensors provide situational awareness while unattended munitions provide a less-than-lethal response capability. Remote resources serve as automated interfaces to legacy physical devices such as manned response vehicles, barrier gates, fence openings, garage doors, and remote power on/off capability for unmanned systems. The Robotic Operations Command Center executes the Multiple Resource Host Architecture (MRHA) to simultaneously control heterogeneous unmanned systems. The MRHA graphically displays video, map, and status for each resource using wireless digital communications for integrated data, video, and audio. Events are prioritized and the user is prompted with audio alerts and text instructions for alarms and warnings. A control hierarchy of missions and duty rosters support autonomous operations. This paper provides an overview of the key technology enablers for Integrated Force Protection with details on a force-on-force scenario to test and demonstrate concept of operations using Unmanned Ground Vehicles. Special attention is given to development and applications for the Remote Detection Challenge and Response (REDCAR) initiative for Integrated Base Defense.

  12. Guidance and control for unmanned ground vehicles

    Science.gov (United States)

    Bateman, Peter J.

    1994-06-01

    Techniques for the guidance, control, and navigation of unmanned ground vehicles are described in terms of the communication bandwidth requirements for driving and control of a vehicle remote from the human operator. Modes of operation are conveniently classified as conventional teleoperation, supervisory control, and fully autonomous control. The fundamental problem of maintaining a robust non-line-of-sight communications link between the human controller and the remote vehicle is discussed, as this provides the impetus for greater autonomy in the control system and the greatest scope for innovation. While supervisory control still requires the man to be providing the primary navigational intelligence, fully autonomous operation requires that mission navigation is provided solely by on-board machine intelligence. Methods directed at achieving this performance are described using various active and passive sensing of the terrain for route navigation and obstacle detection. Emphasis is given to TV imagery and signal processing techniques for image understanding. Reference is made to the limitations of current microprocessor technology and suitable computer architectures. Some of the more recent control techniques involve the use of neural networks, fuzzy logic, and data fusion and these are discussed in the context of road following and cross country navigation. Examples of autonomous vehicle testbeds operated at various laboratories around the world are given.

  13. Mesh Optimization for Ground Vehicle Aerodynamics

    OpenAIRE

    Adrian Gaylard; Essam F Abo-Serie; Nor Elyana Ahmad

    2010-01-01

    Mesh optimization strategy for estimating accurate drag of a ground vehicle is proposed based on examining the effect of different mesh parameters.  The optimized mesh parameters were selected using design of experiment (DOE) method to be able to work in a...

  14. Estimating Hedonic Price Indices for Ground Vehicles

    Science.gov (United States)

    2015-06-01

    organizations use price indices to distinguish sector-specific real price growth from general inflation  OMB uses price indices to estimate the relative...I N S T I T U T E F O R D E F E N S E A N A L Y S E S Estimating Hedonic Price Indices for Ground Vehicles (Presentation) David M. Tate Stanley...currently valid OMB control number. 1. REPORT DATE JUN 2015 2. REPORT TYPE 3. DATES COVERED 4. TITLE AND SUBTITLE Estimating Hedonic Price

  15. Model Identification of a Micro Air Vehicle

    Institute of Scientific and Technical Information of China (English)

    Jorge Ni(n)o; Flavius Mitrache; Peter Cosyn; Robin De Keyser

    2007-01-01

    This paper is focused on the model identification of a Micro Air Vehicle (MAV) in straight steady flight condition. The identification is based on input-output data collected from flight tests using both frequency and time dontain techniques. The vehicle is an in-house 40 cm wingspan airplane. Because of the complex coupled, multivariable and nonlinear dynamics of the aircraft, linear SISO structures for both the lateral and longitudinal models around a reference state were derived. The aim of the identification is to provide models that can be used in future development of control techniques for the MAV.

  16. The 18th Annual Intelligent Ground Vehicle Competition: trends and influences for intelligent ground vehicle control

    Science.gov (United States)

    Theisen, Bernard L.; Frederick, Philip; Smuda, William

    2011-01-01

    The Intelligent Ground Vehicle Competition (IGVC) is one of four, unmanned systems, student competitions that were founded by the Association for Unmanned Vehicle Systems International (AUVSI). The IGVC is a multidisciplinary exercise in product realization that challenges college engineering student teams to integrate advanced control theory, machine vision, vehicular electronics and mobile platform fundamentals to design and build an unmanned system. Teams from around the world focus on developing a suite of dual-use technologies to equip ground vehicles of the future with intelligent driving capabilities. Over the past 18 years, the competition has challenged undergraduate, graduate and Ph.D. students with real world applications in intelligent transportation systems, the military and manufacturing automation. To date, teams from over 75 universities and colleges have participated. This paper describes some of the applications of the technologies required by this competition and discusses the educational benefits. The primary goal of the IGVC is to advance engineering education in intelligent vehicles and related technologies. The employment and professional networking opportunities created for students and industrial sponsors through a series of technical events over the four-day competition are highlighted. Finally, an assessment of the competition based on participation is presented.

  17. The 19th Annual Intelligent Ground Vehicle Competition: student built autonomous ground vehicles

    Science.gov (United States)

    Theisen, Bernard L.

    2012-01-01

    The Intelligent Ground Vehicle Competition (IGVC) is one of four, unmanned systems, student competitions that were founded by the Association for Unmanned Vehicle Systems International (AUVSI). The IGVC is a multidisciplinary exercise in product realization that challenges college engineering student teams to integrate advanced control theory, machine vision, vehicular electronics and mobile platform fundamentals to design and build an unmanned system. Teams from around the world focus on developing a suite of dual-use technologies to equip ground vehicles of the future with intelligent driving capabilities. Over the past 19 years, the competition has challenged undergraduate, graduate and Ph.D. students with real world applications in intelligent transportation systems, the military and manufacturing automation. To date, teams from almost 80 universities and colleges have participated. This paper describes some of the applications of the technologies required by this competition and discusses the educational benefits. The primary goal of the IGVC is to advance engineering education in intelligent vehicles and related technologies. The employment and professional networking opportunities created for students and industrial sponsors through a series of technical events over the four-day competition are highlighted. Finally, an assessment of the competition based on participation is presented.

  18. Aluminum Rich Epoxy Primer for Ground and Air Vehicles

    Science.gov (United States)

    2017-03-01

    UNCLASSIFIED DOCUMENT Aluminum Rich Epoxy Primer for Ground and Air Vehicles Monthly Technical Report for the Period: January 20, 2017...Objective: To further develop the Aluminum Rich Epoxy Primer systems for Air and Ground Vehicles while addressing the objective requirements... Epoxy Primers in order to afford a lower initial viscosity allowing for better application properties; lower VOC; and the incorporation of various

  19. Frameworks and middleware for umanned ground vehicles

    Science.gov (United States)

    Broten, Greg S.; Monckton, Simon P.

    2005-05-01

    Modern unmanned vehicles (UV) are complex systems. The current generation of UVs have extensive capabilities allowing the UV to sense its environment, create an internal representation of the environment, navigate within this environment by commanding movement and accomplish this in real-time. This proliferation of UV capabilities has resulted in large and complex software systems that are often distributed across multiple processors. Such systems have a reputation for convoluted implementations that result in software that is difficult to understand, expand, debug and repair. In order for a UV to operate successfully this issue of complex distributed software systems must be mastered. The computing science field views a modular, component based design as the best approach for implementing complex distributed software systems. Methodologies and toolkits such as frameworks and middleware have been developed to enable and simplify the implementation of distributed software systems. DRDC and other research institutions are developing UVs frameworks using CORBA middleware. A CORBA interface enables location transparency, thus it does not matter whether the component is locally or remotely located. The UV autonomy framework developed at DRDC is based upon the Miro framework which was originally developed for soccer playing robots. The Miro framework implements many key features and methods required by autonomous systems and Miro's basis in CORBA allows it to be easily modified and extended to support the unique requirements of military UVs. DRDC has modified and extended Miro so that it now supports autonomous unmanned ground vehicles. The process of implementing these changes substantiated the advantages of frameworks and middleware since Miro proved to be highly flexible and easy to extend.

  20. Vehicle Dynamic Prediction Systems with On-Line Identification of Vehicle Parameters and Road Conditions

    OpenAIRE

    Ling-Yuan Hsu; Tsung-Lin Chen

    2012-01-01

    This paper presents a vehicle dynamics prediction system, which consists of a sensor fusion system and a vehicle parameter identification system. This sensor fusion system can obtain the six degree-of-freedom vehicle dynamics and two road angles without using a vehicle model. The vehicle parameter identification system uses the vehicle dynamics from the sensor fusion system to identify ten vehicle parameters in real time, including vehicle mass, moment of inertial, and road friction coefficie...

  1. Steerable wheel structure for ground vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Frye, N.V.

    1988-09-27

    This patent describes a ground vehicle having a fore-and-aft body including transversely spaced apart, right and left, fore-and-aft supports: steerable wheel structure comprising transverse axle means disposed between the supports and having right and left end portions respectively adjacent to the right and left supports, a wheel journaled on the axle means intermediate the supports on a transverse horizontal axis, right and left carriers respectively on the right and left supports, each including a fixed element mounted fixedly on the associated support and a movable member arranged for selective fore-and-aft movement relative to the support and relative to each other, right and left connecting means connecting the right and left movable members respectively to the right and left end portions of the axle means for effecting steering of the wheel as one carrier moves forward and the other moves simultaneously rearwardly, and vice versa, at least one of the members at each side of the body being constructed to accommodate fore-and-aft swinging of the axle means during steering of the wheel, and means for moving the movable members simultaneously, one forwardly and the other rearwardly.

  2. An unmanned ground vehicle for landmine remediation

    Science.gov (United States)

    Wasson, Steven R.; Guilberto, Jose; Ogg, Wade; Wedeward, Kevin; Bruder, Stephen; El-Osery, Aly

    2004-09-01

    Anti-tank (AT) landmines slow down and endanger military advances and present sizeable humanitarian problems. The remediation of these mines by direct human intervention is both dangerous and costly. The Intelligent Systems & Robotics Group (ISRG) at New Mexico Tech has provided a partial solution to this problem by developing an Unmanned Ground Vehicle (UGV) to remediate these mines without endangering human lives. This paper presents an overview of the design and operation of this UGV. Current results and future work are also described herein. To initiate the remediation process the UGV is given the GPS coordinates of previously detected landmines. Once the UGV autonomously navigates to an acceptable proximity of the landmine, a remote operator acquires control over a wireless network link using a joystick on a base station. Utilizing two cameras mounted on the UGV, the operator is able to accurately position the UGV directly over the landmine. The UGV houses a self-contained drill system equipped with its own processing resources, sensors, and actuators. The drill system deploys a neutralizing device over the landmine to neutralize it. One such device, developed by Science Applications International Corporation (SAIC), employs incendiary materials to melt through the container of the landmine and slowly burn the explosive material, thereby safely and remotely disabling the landmine.

  3. Mesh Optimization for Ground Vehicle Aerodynamics

    Directory of Open Access Journals (Sweden)

    Adrian Gaylard

    2010-04-01

    Full Text Available

    Mesh optimization strategy for estimating accurate drag of a ground vehicle is proposed based on examining the effect of different mesh parameters.  The optimized mesh parameters were selected using design of experiment (DOE method to be able to work in a limited memory environment and in a reasonable amount of time but without compromising the accuracy of results. The study was further extended to take into account the car model size effect. Three car model sizes have been investigated and compared with MIRA scale wind tunnel results. Parameters that lead to drag value closer to experiment with less memory and computational time have been identified. Scaling the optimized mesh size with the length of car model was successfully used to predict the drag of the other car sizes with reasonable accuracy. This investigation was carried out using STARCCM+ commercial software package, however the findings can be applied to any other CFD package.

  4. Performance and Stability of a Winged Vehicle in Ground Effect

    CERN Document Server

    de Divitiis, Nicola

    2009-01-01

    Present work deals with the dynamics of vehicles which intentionally operate in the ground proximity. The dynamics in ground effect is influenced by the vehicle orientation with respect to the ground, since the aerodynamic force and moment coefficients, which in turn depend on height and angle of attack, also vary with the Euler angles. This feature, usually neglected in the applications, can be responsible for sizable variations of the aircraft performance and stability. A further effect, caused by the sink rate, determines unsteadiness that modifies the aerodynamic coefficients. In this work, an analytical formulation is proposed for the force and moment calculation in the presence of the ground and taking the aircraft attitude and sink rate into account. The aerodynamic coefficients are firstly calculated for a representative vehicle and its characteristics in ground effect are investigated. Performance and stability characteristics are then discussed with reference to significant equilibrium conditions, w...

  5. Study on Ground Automatic Identification Technology for Intelligent Vehicle Based on Vision Sensor%基于视觉传感器的自主车辆地面自动辨识技术研究

    Institute of Scientific and Technical Information of China (English)

    崔根群; 余建明; 赵娴; 赵丛琳

    2011-01-01

    The ground automatic identification technology for intelligent vehicle is iaking Leobor-Edu autonomous vehicle as a test vector and using DH-HV2003UC-T vision sensor to collect image infarmaiion of five common lane roads( cobbled road, concrete road, dirt road, grass road, tile road) , then using MATLAB image processing module to perform coding compression, recovery reconstruction, smoothing, sharpening, enhancement, feature extraction and other related processing,then using MATLAB BP neural network module to carry on pattern recognition.Through analyzing the pattern recognition result, lt shows that the objective error is 20%, the road recognition rate has reached the intended requirement in the system,and it can be universally applied in the smart vehicle or robots and other related fields.%谊自主车辆地面自动辨识技术是以Leobot-Edu自主车辆作为试验载体,并应用DH-HV2003UC-T视觉传感器对常见的5种行车路面(石子路面、水泥路面、土壤路面、草地路面、砖地路面)进行图像信息的采集,应用Matlab图像处理模块对其依次进行压缩编码、复原重建、平滑、锐化、增强、特征提取等相关处理后,再应用Matlab BP神经网络模块进行模式识别.通过对模式识别结果分析可知,网络训练目标的函数误差为20%,该系统路面识别率达到预定要求,可以在智能车辆或移动机器人等相关领域普及使用.

  6. Real-Time Identification of Wheel Terrain Interaction Models for Enhanced Autonomous Vehicle Mobility

    Science.gov (United States)

    2014-04-24

    capable instrumentation. • A system reliant on RTK GPS would not be very practical and we show it to be unnecessary. 7/6/2014 Vehicle - Ground...includes: – Moblility logs (post-processed RTK - GPS pose, wheel odometry) for 3 different terrain (grass, dirt, parking lot) on the LandTamer (6x6...Platform Retrofit 7/6/2014 Vehicle - Ground Model Identification 12 AVT GT1920C GigE Camera Pose System: Novatel OEMV-3 GPS Receiver + Honeywell

  7. Objectives and Progress on Integrated Vehicle Ground Vibration Testing for the Ares Launch Vehicles

    Science.gov (United States)

    Tuma, Margaret L.; Asloms. Brice R.

    2009-01-01

    As NASA begins design and development of the Ares launch vehicles to replace the Space Shuttle and explore beyond low Earth orbit, Integrated Vehicle Ground Vibration Testing (IVGVT) will be a vital component of ensuring that those vehicles can perform the missions assigned to them. A ground vibration test (GVT) is intended to measure by test the fundamental dynamic characteristics of launch vehicles during various phases of flight. During the series of tests, properties such as natural frequencies, mode shapes, and transfer functions are measured directly. This data is then used to calibrate loads and control systems analysis models for verifying analyses of the launch vehicle. The Ares Flight & Integrated Test Office (FITO) will be conducting IVGVT for the Ares I crew launch vehicle at Marshall Space Flight Center (MSFC) from 2011 to 2012 using the venerable Test Stand (TS) 4550, which supported similar tests for the Saturn V and Space Shuttle vehicle stacks.

  8. 41 CFR 102-34.85 - What motor vehicles require motor vehicle identification?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What motor vehicles require motor vehicle identification? 102-34.85 Section 102-34.85 Public Contracts and Property Management... 34-MOTOR VEHICLE MANAGEMENT Identifying and Registering Motor Vehicles Motor Vehicle...

  9. Behaviour recognition of ground vehicle using airborne monitoring of unmanned aerial vehicles

    Science.gov (United States)

    Oh, Hyondong; Kim, Seungkeun; Shin, Hyo-Sang; Tsourdos, Antonios; White, Brian A.

    2014-12-01

    This paper proposes a behaviour recognition methodology for ground vehicles moving within road traffic using unmanned aerial vehicles in order to identify suspicious or abnormal behaviour. With the target information acquired by unmanned aerial vehicles and estimated by filtering techniques, ground vehicle behaviour is first classified into representative driving modes, and then a string pattern matching theory is applied to detect suspicious behaviours in the driving mode history. Furthermore, a fuzzy decision-making process is developed to systematically exploit all available information obtained from a complex environment and confirm the characteristic of behaviour, while considering spatiotemporal environment factors as well as several aspects of behaviours. To verify the feasibility and benefits of the proposed approach, numerical simulations on moving ground vehicles are performed using realistic car trajectory data from an off-the-shelf traffic simulation software.

  10. Hedonic Price Indices for Ground Vehicles

    Science.gov (United States)

    2015-05-01

    portion of price change that is unexplainable by other means. In previous work with aircraft, Harmon et al. (2014) found that cost progress curves...same time, we noticed that year-over-year price growth for most vehicle systems seemed higher than could be accounted for by simple inflation...quality growth terms attribute some of the observed price growth to that, leaving less unexplained price growth to be accounted for by the price index

  11. Modeling and Model Identification of Autonomous Underwater Vehicles

    Science.gov (United States)

    2015-06-01

    IDENTIFICATION OF AUTONOMOUS UNDERWATER VEHICLES by Jose Alberti June 2015 Thesis Advisor: Noel du Toit Second Reader: Douglas...Master’s Thesis 4. TITLE AND SUBTITLE MODELING AND MODEL IDENTIFICATION OF AUTONOMOUS UNDERWATER VEHICLES 5. FUNDING NUMBERS 6. AUTHOR(S...unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) As autonomous underwater vehicles (AUVs) are deployed in more complex

  12. Design of a Smart Unmanned Ground Vehicle for Hazardous Environments

    CERN Document Server

    Chakraborty, Saurav

    2010-01-01

    A smart Unmanned Ground Vehicle (UGV) is designed and developed for some application specific missions to operate predominantly in hazardous environments. In our work, we have developed a small and lightweight vehicle to operate in general cross-country terrains in or without daylight. The UGV can send visual feedbacks to the operator at a remote location. Onboard infrared sensors can detect the obstacles around the UGV and sends signals to the operator.

  13. Mission aware energy saving strategies for Army ground vehicles

    Science.gov (United States)

    Dattathreya, Macam S.

    Fuel energy is a basic necessity for this planet and the modern technology to perform many activities on earth. On the other hand, quadrupled automotive vehicle usage by the commercial industry and military has increased fuel consumption. Military readiness of Army ground vehicles is very important for a country to protect its people and resources. Fuel energy is a major requirement for Army ground vehicles. According to a report, a department of defense has spent nearly $13.6 billion on fuel and electricity to conduct ground missions. On the contrary, energy availability on this plant is slowly decreasing. Therefore, saving energy in Army ground vehicles is very important. Army ground vehicles are embedded with numerous electronic systems to conduct missions such as silent and normal stationary surveillance missions. Increasing electrical energy consumption of these systems is influencing higher fuel consumption of the vehicle. To save energy, the vehicles can use any of the existing techniques, but they require complex, expensive, and time consuming implementations. Therefore, cheaper and simpler approaches are required. In addition, the solutions have to save energy according to mission needs and also overcome size and weight constraints of the vehicle. Existing research in the current literature do not have any mission aware approaches to save energy. This dissertation research proposes mission aware online energy saving strategies for stationary Army ground vehicles to save energy as well as to meet the electrical needs of the vehicle during surveillance missions. The research also proposes theoretical models of surveillance missions, fuzzy logic models of engine and alternator efficiency data, and fuzzy logic algorithms. Based on these models, two energy saving strategies are proposed for silent and normal surveillance type of missions. During silent mission, the engine is on and batteries power the systems. During normal surveillance mission, the engine is

  14. A usage-centered evaluation methodology for unmanned ground vehicles

    NARCIS (Netherlands)

    Diggelen, J. van; Looije, R.; Mioch, T.; Neerincx, M.A.; Smets, N.J.J.M.

    2012-01-01

    This paper presents a usage-centered evaluation method to assess the capabilities of a particular Unmanned Ground Vehicle (UGV) for establishing the operational goals. The method includes a test battery consisting of basic tasks (e.g., slalom, funnel driving, object detection). Tests can be of diffe

  15. A usage-centered evaluation methodology for unmanned ground vehicles

    NARCIS (Netherlands)

    Diggelen, J. van; Looije, R.; Mioch, T.; Neerincx, M.A.; Smets, N.J.J.M.

    2012-01-01

    This paper presents a usage-centered evaluation method to assess the capabilities of a particular Unmanned Ground Vehicle (UGV) for establishing the operational goals. The method includes a test battery consisting of basic tasks (e.g., slalom, funnel driving, object detection). Tests can be of diffe

  16. Modeling ground vehicle acoustic signatures for analysis and synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Haschke, G. [Sandia National Labs., Albuquerque, NM (United States); Stanfield, R. [US Army CECOM, Night Vision and Electronic Sensors Directorate, Fort Belvoir, VA (United States)

    1995-07-01

    Security and weapon systems use acoustic sensor signals to classify and identify moving ground vehicles. Developing robust signal processing algorithms for this is expensive, particularly in presence of acoustic clutter or countermeasures. This paper proposes a parametric ground vehicle acoustic signature model to aid the system designer in understanding which signature features are important, developing corresponding feature extraction algorithms and generating low-cost, high-fidelity synthetic signatures for testing. The authors have proposed computer-generated acoustic signatures of armored, tracked ground vehicles to deceive acoustic-sensored smart munitions. They have developed quantitative measures of how accurately a synthetic acoustic signature matches those produced by actual vehicles. This paper describes parameters of the model used to generate these synthetic signatures and suggests methods for extracting these parameters from signatures of valid vehicle encounters. The model incorporates wide-bandwidth and narrow- bandwidth components that are modulated in a pseudo-random fashion to mimic the time dynamics of valid vehicle signatures. Narrow- bandwidth feature extraction techniques estimate frequency, amplitude and phase information contained in a single set of narrow frequency- band harmonics. Wide-bandwidth feature extraction techniques estimate parameters of a correlated-noise-floor model. Finally, the authors propose a method of modeling the time dynamics of the harmonic amplitudes as a means adding necessary time-varying features to the narrow-bandwidth signal components. The authors present results of applying this modeling technique to acoustic signatures recorded during encounters with one armored, tracked vehicle. Similar modeling techniques can be applied to security systems.

  17. Vehicle dynamic prediction systems with on-line identification of vehicle parameters and road conditions.

    Science.gov (United States)

    Hsu, Ling-Yuan; Chen, Tsung-Lin

    2012-01-01

    This paper presents a vehicle dynamics prediction system, which consists of a sensor fusion system and a vehicle parameter identification system. This sensor fusion system can obtain the six degree-of-freedom vehicle dynamics and two road angles without using a vehicle model. The vehicle parameter identification system uses the vehicle dynamics from the sensor fusion system to identify ten vehicle parameters in real time, including vehicle mass, moment of inertial, and road friction coefficients. With above two systems, the future vehicle dynamics is predicted by using a vehicle dynamics model, obtained from the parameter identification system, to propagate with time the current vehicle state values, obtained from the sensor fusion system. Comparing with most existing literatures in this field, the proposed approach improves the prediction accuracy both by incorporating more vehicle dynamics to the prediction system and by on-line identification to minimize the vehicle modeling errors. Simulation results show that the proposed method successfully predicts the vehicle dynamics in a left-hand turn event and a rollover event. The prediction inaccuracy is 0.51% in a left-hand turn event and 27.3% in a rollover event.

  18. Environmental Perception and Sensor Data Fusion for Unmanned Ground Vehicle

    Directory of Open Access Journals (Sweden)

    Yibing Zhao

    2013-01-01

    Full Text Available Unmanned Ground Vehicles (UGVs that can drive autonomously in cross-country environment have received a good deal of attention in recent years. They must have the ability to determine whether the current terrain is traversable or not by using onboard sensors. This paper explores new methods related to environment perception based on computer image processing, pattern recognition, multisensors data fusion, and multidisciplinary theory. Kalman filter is used for low-level fusion of physical level, thus using the D-S evidence theory for high-level data fusion. Probability Test and Gaussian Mixture Model are proposed to obtain the traversable region in the forward-facing camera view for UGV. One feature set including color and texture information is extracted from areas of interest and combined with a classifier approach to resolve two types of terrain (traversable or not. Also, three-dimension data are employed; the feature set contains components such as distance contrast of three-dimension data, edge chain-code curvature of camera image, and covariance matrix based on the principal component method. This paper puts forward one new method that is suitable for distributing basic probability assignment (BPA, based on which D-S theory of evidence is employed to integrate sensors information and recognize the obstacle. The subordination obtained by using the fuzzy interpolation is applied to calculate the basic probability assignment. It is supposed that the subordination is equal to correlation coefficient in the formula. More accurate results of object identification are achieved by using the D-S theory of evidence. Control on motion behavior or autonomous navigation for UGV is based on the method, which is necessary for UGV high speed driving in cross-country environment. The experiment results have demonstrated the viability of the new method.

  19. Space imaging infrared optical guidance for autonomous ground vehicle

    Science.gov (United States)

    Akiyama, Akira; Kobayashi, Nobuaki; Mutoh, Eiichiro; Kumagai, Hideo; Yamada, Hirofumi; Ishii, Hiromitsu

    2008-08-01

    We have developed the Space Imaging Infrared Optical Guidance for Autonomous Ground Vehicle based on the uncooled infrared camera and focusing technique to detect the objects to be evaded and to set the drive path. For this purpose we made servomotor drive system to control the focus function of the infrared camera lens. To determine the best focus position we use the auto focus image processing of Daubechies wavelet transform technique with 4 terms. From the determined best focus position we transformed it to the distance of the object. We made the aluminum frame ground vehicle to mount the auto focus infrared unit. Its size is 900mm long and 800mm wide. This vehicle mounted Ackerman front steering system and the rear motor drive system. To confirm the guidance ability of the Space Imaging Infrared Optical Guidance for Autonomous Ground Vehicle we had the experiments for the detection ability of the infrared auto focus unit to the actual car on the road and the roadside wall. As a result the auto focus image processing based on the Daubechies wavelet transform technique detects the best focus image clearly and give the depth of the object from the infrared camera unit.

  20. Improved obstacle avoidance and navigation for an autonomous ground vehicle

    Science.gov (United States)

    Giri, Binod; Cho, Hyunsu; Williams, Benjamin C.; Tann, Hokchhay; Shakya, Bicky; Bharam, Vishal; Ahlgren, David J.

    2015-01-01

    This paper presents improvements made to the intelligence algorithms employed on Q, an autonomous ground vehicle, for the 2014 Intelligent Ground Vehicle Competition (IGVC). In 2012, the IGVC committee combined the formerly separate autonomous and navigation challenges into a single AUT-NAV challenge. In this new challenge, the vehicle is required to navigate through a grassy obstacle course and stay within the course boundaries (a lane of two white painted lines) that guide it toward a given GPS waypoint. Once the vehicle reaches this waypoint, it enters an open course where it is required to navigate to another GPS waypoint while avoiding obstacles. After reaching the final waypoint, the vehicle is required to traverse another obstacle course before completing the run. Q uses modular parallel software architecture in which image processing, navigation, and sensor control algorithms run concurrently. A tuned navigation algorithm allows Q to smoothly maneuver through obstacle fields. For the 2014 competition, most revisions occurred in the vision system, which detects white lines and informs the navigation component. Barrel obstacles of various colors presented a new challenge for image processing: the previous color plane extraction algorithm would not suffice. To overcome this difficulty, laser range sensor data were overlaid on visual data. Q also participates in the Joint Architecture for Unmanned Systems (JAUS) challenge at IGVC. For 2014, significant updates were implemented: the JAUS component accepted a greater variety of messages and showed better compliance to the JAUS technical standard. With these improvements, Q secured second place in the JAUS competition.

  1. Unmanned Ground Vehicle Perception Using Thermal Infrared Cameras

    Science.gov (United States)

    Rankin, Arturo; Huertas, Andres; Matthies, Larry; Bajracharya, Max; Assad, Christopher; Brennan, Shane; Bellut, Paolo; Sherwin, Gary

    2011-01-01

    TIR cameras can be used for day/night Unmanned Ground Vehicle (UGV) autonomous navigation when stealth is required. The quality of uncooled TIR cameras has significantly improved over the last decade, making them a viable option at low speed Limiting factors for stereo ranging with uncooled LWIR cameras are image blur and low texture scenes TIR perception capabilities JPL has explored includes: (1) single and dual band TIR terrain classification (2) obstacle detection (pedestrian, vehicle, tree trunks, ditches, and water) (3) perception thru obscurants

  2. Magnesium Technology and Manufacturing for Ultra Lightweight Armored Ground Vehicles

    Science.gov (United States)

    2009-02-01

    Bruce Davis and Rick DeLorme Magnesium Elektron North America, Inc. A reprint from the Proceedings of the 2008 Army Science Conference...SUPPLEMENTARY NOTES *Magnesium Elektron North America, Inc., 1001 College St., Madison, IL 62060 A reprint from the Proceedings of the 2008 Army Science...initial emphasis on the Elektron WE43 alloy system for lightweight armored ground vehicle applications. Engineering design factors are reviewed and

  3. Application of parallelized software architecture to an autonomous ground vehicle

    Science.gov (United States)

    Shakya, Rahul; Wright, Adam; Shin, Young Ho; Momin, Orko; Petkovsek, Steven; Wortman, Paul; Gautam, Prasanna; Norton, Adam

    2011-01-01

    This paper presents improvements made to Q, an autonomous ground vehicle designed to participate in the Intelligent Ground Vehicle Competition (IGVC). For the 2010 IGVC, Q was upgraded with a new parallelized software architecture and a new vision processor. Improvements were made to the power system reducing the number of batteries required for operation from six to one. In previous years, a single state machine was used to execute the bulk of processing activities including sensor interfacing, data processing, path planning, navigation algorithms and motor control. This inefficient approach led to poor software performance and made it difficult to maintain or modify. For IGVC 2010, the team implemented a modular parallel architecture using the National Instruments (NI) LabVIEW programming language. The new architecture divides all the necessary tasks - motor control, navigation, sensor data collection, etc. into well-organized components that execute in parallel, providing considerable flexibility and facilitating efficient use of processing power. Computer vision is used to detect white lines on the ground and determine their location relative to the robot. With the new vision processor and some optimization of the image processing algorithm used last year, two frames can be acquired and processed in 70ms. With all these improvements, Q placed 2nd in the autonomous challenge.

  4. Achieving integrated convoys: cargo unmanned ground vehicle development and experimentation

    Science.gov (United States)

    Zych, Noah; Silver, David; Stager, David; Green, Colin; Pilarski, Thomas; Fischer, Jacob

    2013-05-01

    The Cargo UGV project was initiated in 2010 with the aim of developing and experimenting with advanced autonomous vehicles capable of being integrated unobtrusively into manned logistics convoys. The intent was to validate two hypotheses in complex, operationally representative environments: first, that unmanned tactical wheeled vehicles provide a force protection advantage by creating standoff distance to warfighters during ambushes or improvised explosive device attacks; and second, that these UGVs serve as force multipliers by enabling a single operator to control multiple unmanned assets. To assess whether current state-of-the-art autonomous vehicle technology was sufficiently capable to permit resupply missions to be executed with decreased risk and reduced manpower, and to assess the effect of UGVs on customary convoy tactics, the Marine Corps Warfighting Laboratory and the Joint Ground Robotics Enterprise sponsored Oshkosh Defense and the National Robotics Engineering Center to equip two standard Marine Corps cargo trucks for autonomous operation. This paper details the system architecture, hardware implementation, and software modules developed to meet the vehicle control, perception, and planner requirements compelled by this application. Additionally, the design of a custom human machine interface and an accompanying training program are described, as is the creation of a realistic convoy simulation environment for rapid system development. Finally, results are conveyed from a warfighter experiment in which the effectiveness of the training program for novice operators was assessed, and the impact of the UGVs on convoy operations was observed in a variety of scenarios via direct comparison to a fully manned convoy.

  5. Integrating intrinsic mobility into unmanned ground vehicle systems

    Science.gov (United States)

    Brosinsky, Chris A.; Penzes, Steven G.; Buehler, Martin G.; Steeves, Carl

    2001-09-01

    The ability of an Unmanned Ground Vehicle (UGV) to successfully move about in its environment is enabled by the synergistic combination of perception, control and platform (mobility and utility). Vast effort is being expended on the former technologies but little demonstrable evidence has been produced to indicate that the latter (mobility/utility) has been considered as an integral part of the UGV systems level capability; a concept commonly referred to as intrinsic mobility. While past work described the rationale for hybrid locomotion, this paper aims to demonstrate that integrating intrinsic mobility into a UGV systems mobility element or 'vehicle' will be a key contributor to the magnitude of autonomy that the system can achieve. This paper serves to provide compelling evidence that 1) intrinsic mobility improvements provided by hybrid locomotion configurations offer the best generic mobility, that 2) strict attention must be placed on the optimization of both utility (inherent vehicle capabilities) and mobility and that 3) the establishment of measures of performance for unmanned vehicle mobility is an unmet and latent need.

  6. Multi- and Hyper-Spectral Sensing for Autonomous Ground Vehicle Navigation

    Energy Technology Data Exchange (ETDEWEB)

    FOGLER, ROBERT J.

    2003-06-01

    Robotic vehicles that navigate autonomously are hindered by unnecessary avoidance of soft obstacles, and entrapment by potentially avoidable obstacles. Existing sensing technologies fail to reliably distinguish hard obstacles from soft obstacles, as well as impassable thickets and other sources of entrapment. Automated materials classification through advanced sensing methods may provide a means to identify such obstacles, and from their identity, to determine whether they must be avoided. Multi- and hyper-spectral electro-optic sensors are used in remote sensing applications to classify both man-made and naturally occurring materials on the earth's surface by their reflectance spectra. The applicability of this sensing technology to obstacle identification for autonomous ground vehicle navigation is the focus of this report. The analysis is restricted to system concepts in which the multi- or hyper-spectral sensor is on-board the ground vehicle, facing forward to detect and classify obstacles ahead of the vehicle. Obstacles of interest include various types of vegetation, rocks, soils, minerals, and selected man-made materials such as paving asphalt and concrete.

  7. Remote control of a small unmanned ground vehicle (SUGV)

    Science.gov (United States)

    Irimie, Nicolae; Zorila, Alexandru; Nan, Alexandru; Schiopu, Paul

    2010-11-01

    Developing robot technology has gained an increasing dynamics. Small unmanned ground vehicle - SUGV has gained a place in the robotics field. This paper describes the possibility of remote control of the SUGV using a fuzzy algorithm. This designed algorithm specifically for controlling of a semi-autonomous mobile robot for research, observation, and surveillance. The device can provide 360-degree panoramic images using an image system which includes a hyperboloid mirror and a CCD camera, designed for this specific purpose. Both components, fuzzy algorithm and image system were implemented, tested in the laboratory condition and outdoor on a mobile robot for research, observation, and surveillance.

  8. Single Fuel Concept for Croatian Army Ground Vehicles

    Directory of Open Access Journals (Sweden)

    Robert Spudić

    2008-05-01

    Full Text Available During the process of approaching the European associationsand NATO the Republic of Croatia has accepted the singlefuel concept for all ground vehicles of the Croatian Army.Croatia has also undertaken to insure that all aircraft, motorvehicles and equipment with turbo-engines or with pressurizedfuel injection, for participation in NATO and PfP led operationscan • operate using the kerosene-based aviation fuel(NATO F-34. The paper gives a brief overview and the resultsof the earned out activities in the Armed Forces of the Republicof Croatia, the expected behaviour of the motor vehicle andpossible delays caused by the use of kerosene fuel (NATOF-34 as fuel for motor vehicles. The paper also gives the advantagesand the drawbacks of the single fuel concept. By acquiringnew data in the Croatian Armed Forces and experienceexchange with other nations about the method of using fuelF-34, the development of the technologies of engine manufacturingand its vital parts or by introducing new standards in theproductjon of fuels and additives new knowledge will certainlybe acquired for providing logistics support in the area of operations,and its final implementation will be a big step forward forthe Republic of Croatia towards Europe and NATO.

  9. Intelligence algorithms for autonomous navigation in a ground vehicle

    Science.gov (United States)

    Petkovsek, Steve; Shakya, Rahul; Shin, Young Ho; Gautam, Prasanna; Norton, Adam; Ahlgren, David J.

    2012-01-01

    This paper will discuss the approach to autonomous navigation used by "Q," an unmanned ground vehicle designed by the Trinity College Robot Study Team to participate in the Intelligent Ground Vehicle Competition (IGVC). For the 2011 competition, Q's intelligence was upgraded in several different areas, resulting in a more robust decision-making process and a more reliable system. In 2010-2011, the software of Q was modified to operate in a modular parallel manner, with all subtasks (including motor control, data acquisition from sensors, image processing, and intelligence) running simultaneously in separate software processes using the National Instruments (NI) LabVIEW programming language. This eliminated processor bottlenecks and increased flexibility in the software architecture. Though overall throughput was increased, the long runtime of the image processing process (150 ms) reduced the precision of Q's realtime decisions. Q had slow reaction times to obstacles detected only by its cameras, such as white lines, and was limited to slow speeds on the course. To address this issue, the image processing software was simplified and also pipelined to increase the image processing throughput and minimize the robot's reaction times. The vision software was also modified to detect differences in the texture of the ground, so that specific surfaces (such as ramps and sand pits) could be identified. While previous iterations of Q failed to detect white lines that were not on a grassy surface, this new software allowed Q to dynamically alter its image processing state so that appropriate thresholds could be applied to detect white lines in changing conditions. In order to maintain an acceptable target heading, a path history algorithm was used to deal with local obstacle fields and GPS waypoints were added to provide a global target heading. These modifications resulted in Q placing 5th in the autonomous challenge and 4th in the navigation challenge at IGVC.

  10. Convolutional Models for Landmine Identification with Ground Penetrating Radar

    NARCIS (Netherlands)

    Roth, F.

    2005-01-01

    This thesis presents new developments in the area of target identification with ground penetrating radar (GPR) intended for the identification of plastic and metal cased antipersonnel (AP) landmines from a single measured GPR return signal, called A-scan. The target identification is formulated as a

  11. Probabilistic Tracking and Trajectory Planning for Autonomous Ground Vehicles in Urban Environments

    Science.gov (United States)

    2016-03-05

    SECURITY CLASSIFICATION OF: The aim of this research is to develop a unified theory for perception and planning in autonomous ground vehicles , with a...Pine Tree Road Ithaca, NY 14850 -2820 ABSTRACT Probabilistic Tracking and Trajectory Planning for Autonomous Ground Vehicles in Urban Environments...Report Title The aim of this research is to develop a unified theory for perception and planning in autonomous ground vehicles , with a specific focus on

  12. Ensuring Safe Exploration: Ares Launch Vehicle Integrated Vehicle Ground Vibration Testing

    Science.gov (United States)

    Tuma, M. L.; Chenevert, D. J.

    2010-01-01

    Integrated vehicle ground vibration testing (IVGVT) will be a vital component for ensuring the safety of NASA's next generation of exploration vehicles to send human beings to the Moon and beyond. A ground vibration test (GVT) measures the fundamental dynamic characteristics of launch vehicles during various phases of flight. The Ares Flight & Integrated Test Office (FITO) will be leading the IVGVT for the Ares I crew launch vehicle at Marshall Space Flight Center (MSFC) from 2012 to 2014 using Test Stand (TS) 4550. MSFC conducted similar GVT for the Saturn V and Space Shuttle vehicles. FITO is responsible for performing the IVGVT on the Ares I crew launch vehicle, which will lift the Orion crew exploration vehicle to low Earth orbit, and the Ares V cargo launch vehicle, which can launch the lunar lander into orbit and send the combined Orionilander vehicles toward the Moon. Ares V consists of a six-engine core stage with two solid rocket boosters and an Earth departure stage (EDS). The same engine will power the EDS and the Ares I second stage. For the Ares IVGVT, the current plan is to test six configurations in three unique test positions inside TS 4550. Position 1 represents the entire launch stack at liftoff (using inert first stage segments). Position 2 consists of the entire launch stack at first stage burn-out (using empty first stage segments). Four Ares I second stage test configurations will be tested in Position 3, consisting of the Upper Stage and Orion crew module in four nominal conditions: J-2X engine ignition, post Launch Abort System (LAS) jettison, critical slosh mass, and J-2X burn-out. Because of long disuse, TS 4550 is being repaired and reactivated to conduct the Ares I IVGVT. The Shuttle-era platforms have been removed and are being replaced with mast climbers that provide ready access to the test articles and can be moved easily to support different positions within the test stand. The electrical power distribution system for TS 4550 was

  13. Infrared stereo calibration for unmanned ground vehicle navigation

    Science.gov (United States)

    Harguess, Josh; Strange, Shawn

    2014-06-01

    The problem of calibrating two color cameras as a stereo pair has been heavily researched and many off-the-shelf software packages, such as Robot Operating System and OpenCV, include calibration routines that work in most cases. However, the problem of calibrating two infrared (IR) cameras for the purposes of sensor fusion and point could generation is relatively new and many challenges exist. We present a comparison of color camera and IR camera stereo calibration using data from an unmanned ground vehicle. There are two main challenges in IR stereo calibration; the calibration board (material, design, etc.) and the accuracy of calibration pattern detection. We present our analysis of these challenges along with our IR stereo calibration methodology. Finally, we present our results both visually and analytically with computed reprojection errors.

  14. Modeling and control for hydraulic transmission of unmanned ground vehicle

    Institute of Scientific and Technical Information of China (English)

    王岩; 张泽; 秦绪情

    2014-01-01

    Variable pump driving variable motor (VPDVM) is the future development trend of the hydraulic transmission of an unmanned ground vehicle (UGV). VPDVM is a dual-input single-output nonlinear system with coupling, which is difficult to control. High pressure automatic variables bang-bang (HABB) was proposed to achieve the desired motor speed. First, the VPDVM nonlinear mathematic model was introduced, then linearized by feedback linearization theory, and the zero-dynamic stability was proved. The HABB control algorithm was proposed for VPDVM, in which the variable motor was controlled by high pressure automatic variables (HA) and the variable pump was controlled by bang-bang. Finally, simulation of VPDVM controlled by HABB was developed. Simulation results demonstrate the HABB can implement the desired motor speed rapidly and has strong robustness against the variations of desired motor speed, load and pump speed.

  15. Route Sanitizer: Connected Vehicle Trajectory De-Identification Tool

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-01

    Route Sanitizer is ORNL's connected vehicle moving object database de-identification tool and a graphical user interface to ORNL's connected vehicle de-identification algorithm. It uses the Google Chrome (soon to be Electron) platform so it will run on different computing platforms. The basic de-identification strategy is record redaction: portions of a vehicle trajectory (e.g. sequences of precise temporal spatial records) are removed. It does not alter retained records. The algorithm uses custom techniques to find areas within trajectories that may be considered private, then it suppresses those in addition to enough of the trajectory surrounding those locations to protect against "inference attacks" in a mathematically sound way. Map data is integrated into the process to make this possible.

  16. A survey of unmanned ground vehicles with applications to agricultural and environmental sensing

    Science.gov (United States)

    Bonadies, Stephanie; Lefcourt, Alan; Gadsden, S. Andrew

    2016-05-01

    Unmanned ground vehicles have been utilized in the last few decades in an effort to increase the efficiency of agriculture, in particular, by reducing labor needs. Unmanned vehicles have been used for a variety of purposes including: soil sampling, irrigation management, precision spraying, mechanical weeding, and crop harvesting. In this paper, unmanned ground vehicles, implemented by researchers or commercial operations, are characterized through a comparison to other vehicles used in agriculture, namely airplanes and UAVs. An overview of different trade-offs of configurations, control schemes, and data collection technologies is provided. Emphasis is given to the use of unmanned ground vehicles in food crops, and includes a discussion of environmental impacts and economics. Factors considered regarding the future trends and potential issues of unmanned ground vehicles include development, management and performance. Also included is a strategy to demonstrate to farmers the safety and profitability of implementing the technology.

  17. Electronic Vehicle Identification Architecture and Proof of Concept

    NARCIS (Netherlands)

    Passchier, I.; Chevrollier, N.G.; Mulder,A.; Vliet,A.O.T.van

    2009-01-01

    An architecture and a proof of concept for Electronic Vehicle Identification have beendeveloped. The system has been successfully tested in a pilot with 23 participants over a period of three months and a total distance of 75.000 km travelled. The architecture consists of a functional definition, a

  18. Electronic Vehicle Identification Architecture and Proof of Concept

    NARCIS (Netherlands)

    Passchier, I.; Chevrollier, N.G.; Mulder,A.; Vliet,A.O.T.van

    2009-01-01

    An architecture and a proof of concept for Electronic Vehicle Identification have beendeveloped. The system has been successfully tested in a pilot with 23 participants over a period of three months and a total distance of 75.000 km travelled. The architecture consists of a functional definition, a

  19. The influence of vehicle front-end design on pedestrian ground impact.

    Science.gov (United States)

    Crocetta, Gianmarco; Piantini, Simone; Pierini, Marco; Simms, Ciaran

    2015-06-01

    Accident data have shown that in pedestrian accidents with high-fronted vehicles (SUVs and vans) the risk of pedestrian head injuries from the contact with the ground is higher than with low-fronted vehicles (passenger cars). However, the reasons for this remain poorly understood. This paper addresses this question using multibody modelling to investigate the influence of vehicle front height and shape in pedestrian accidents on the mechanism of impact with the ground and on head ground impact speed. To this end, a set of 648 pedestrian/vehicle crash simulations was carried out using the MADYMO multibody simulation software. Impacts were simulated with six vehicle types at three impact speeds (20, 30, 40km/h) and three pedestrian types (50th % male, 5th % female, and 6-year-old child) at six different initial stance configurations, stationary and walking at 1.4m/s. Six different ground impact mechanisms, distinguished from each other by the manner in which the pedestrian impacted the ground, were identified. These configurations have statistically distinct and considerably different distributions of head-ground impact speeds. Pedestrian initial stance configuration (gait and walking speed) introduced a high variability to the head-ground impact speed. Nonetheless, the head-ground impact speed varied significantly between the different ground impact mechanisms identified and the distribution of impact mechanisms was strongly associated with vehicle type. In general, impact mechanisms for adults resulting in a head-first contact with the ground were more severe with high fronted vehicles compared to low fronted vehicles, though there is a speed dependency to these findings. With high fronted vehicles (SUVs and vans) the pedestrian was mainly pushed forward and for children this resulted in high head ground contact speeds. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Adaptive Neuro-Fuzzy Technique for Autonomous Ground Vehicle Navigation

    Directory of Open Access Journals (Sweden)

    Auday Al-Mayyahi

    2014-11-01

    Full Text Available This article proposes an adaptive neuro-fuzzy inference system (ANFIS for solving navigation problems of an autonomous ground vehicle (AGV. The system consists of four ANFIS controllers; two of which are used for regulating both the left and right angular velocities of the AGV in order to reach the target position; and other two ANFIS controllers are used for optimal heading adjustment in order to avoid obstacles. The two velocity controllers receive three sensor inputs: front distance (FD; right distance (RD and left distance (LD for the low-level motion control. Two heading controllers deploy the angle difference (AD between the heading of AGV and the angle to the target to choose the optimal direction. The simulation experiments have been carried out under two different scenarios to investigate the feasibility of the proposed ANFIS technique. The simulation results have been presented using MATLAB software package; showing that ANFIS is capable of performing the navigation and path planning task safely and efficiently in a workspace populated with static obstacles.

  1. Ground control stations for unmanned air vehicles (Review Paper

    Directory of Open Access Journals (Sweden)

    G. Natarajan

    2001-07-01

    Full Text Available "During the last five decades, the world has witnessed tremendous growth in the military aircraft technology and the air defence weapons technology. Use of manned aircraft for routine reconnaissance/surveillance missions has become a less preferred option due to possible high attrition rate. Currently, the high political cost of human life has practically earmarked the roles of reconnaissance and surveillance missions to the unmanned air vehicles (UAVs. Almost every major country has a UAV program of its own and this interest has spawned intensive research in the field of UAVs. Presently, the UAVs come in all shapes and sizes, from palm top micro UAVs to giant strategic UAVs that can loiter over targets for extended periods of time. Though UAVs are capable of operating at different levels of autonomy, these are generally controlled from a ground control station (GCS. The GCS is the nerve centre of activity during UAV missions and provides necessary capability to plan and execute UAV missions. The GCS incorporates facilities, such as communication, displays, mission planning and data exploitation. The GCS architecture is highly processor-oriented and hence the computer hardware and software technologies play a major role in the realisation of this vital system. This paper gives an overview of the GCS, its architecture and the current state-of-the-art in various subsystem technologies.

  2. Identification of Vehicle Health Assurance Related Trends

    Science.gov (United States)

    Phojanamongkolkij, Nipa; Evans, Joni K.; Barr, Lawrence C.; Leone, Karen M.; Reveley, Mary S.

    2014-01-01

    Trend analysis in aviation as related to vehicle health management (VHM) was performed by reviewing the most current statistical and prognostics data available from the National Transportation Safety Board (NTSB) accident, the Federal Aviation Administration (FAA) incident, and the NASA Aviation Safety Reporting System (ASRS) incident datasets. In addition, future directions in aviation technology related to VHM research areas were assessed through the Commercial Aviation Safety Team (CAST) Safety Enhancements Reserved for Future Implementations (SERFIs), the National Transportation Safety Board (NTSB) Most-Wanted List and recent open safety recommendations, the National Research Council (NRC) Decadal Survey of Civil Aeronautics, and the Future Aviation Safety Team (FAST) areas of change. Future research direction in the VHM research areas is evidently strong as seen from recent research solicitations from the Naval Air Systems Command (NAVAIR), and VHM-related technologies actively being developed by aviation industry leaders, including GE, Boeing, Airbus, and UTC Aerospace Systems. Given the highly complex VHM systems, modifications can be made in the future so that the Vehicle Systems Safety Technology Project (VSST) technical challenges address inadequate maintenance crew's trainings and skills, and the certification methods of such systems as recommended by the NTSB, NRC, and FAST areas of change.

  3. Vehicle identification using fuzzy adaline neural network

    Directory of Open Access Journals (Sweden)

    Gokul Murugesan

    2013-01-01

    Full Text Available Video surveillance is an important aspect in today’s world, where a particular scene of area requires monitoring to avoid terrorist attacks and unauthorized entries. Vehicle recognition is an important area in object tracking and recognition. Objects may be of rigid or non-rigid in nature with varying velocity and have different features. Important features like shape, logo, color and texture are complex in nature. Hence there is a need of better algorithm for detecting and identifying the objects like car. A new method is proposed for recognizing the cars present in the video. At first the features like shape is extracted using moments, logo using the Scale Invariant Feature Transform (SIFT and the RGB color values of the car body. Using these features the recognition is carried out to classify the type of car. Recognition of cars has range of application like, military surveillance, traffic management, autonomous navigation system, auto parking.

  4. Investigations into near-real-time surveying for geophysical data collection using an autonomous ground vehicle

    Science.gov (United States)

    Phelps, Geoffrey A.; Ippolito, C.; Lee, R.; Spritzer, R.; Yeh, Y.

    2014-01-01

    The U.S. Geological Survey and the National Aeronautics and Space Administration are cooperatively investigating the utility of unmanned vehicles for near-real-time autonomous surveys of geophysical data collection. Initially focused on unmanned ground vehicle collection of magnetic data, this cooperative effort has brought unmanned surveying, precision guidance, near-real-time communication, on-the-fly data processing, and near-real-time data interpretation into the realm of ground geophysical surveying, all of which offer advantages over current methods of manned collection of ground magnetic data. An unmanned ground vehicle mission has demonstrated that these vehicles can successfully complete missions to collect geophysical data, and add advantages in data collection, processing, and interpretation. We view the current experiment as an initial phase in further unmanned vehicle data-collection missions, including aerial surveying.

  5. Vehicle Identification using Discrete Spectrums in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Seung S. Yang

    2008-04-01

    Full Text Available We studied the possibility of using wireless sensor networks for vehicle identification in a large open field. This is exciting research in that it not only presents a challenge but has practicality. The challenge here is to develop algorithms and/or protocols for sensor nodes to execute a given task. Since each sensor node has limited computation and communication capabilities, these limitations prohibit the use of algorithms and/or protocols developed for conventional computers and networks. Each sensor is dispensable and easily deployable, it can do meaningful work when it is collaborated as a networked cluster; therefore it is very practical in application. Our goal is to identify vehicles in real time using acoustic signal sensors and wireless networks. Our contribution in this paper is three fold. First, we developed a simple vehicle sound identification algorithm enough to be implemented for capacity limited sensor nodes. Second, we proposed architecture and protocols of wireless sensor networks for vehicle identification using this developed sound classification algorithm. Third, we proposed a cooperation model among sensors to expedite the classification process. Our preliminary results show the proposed architecture and protocols are promising.

  6. THE METHOD of computation images matching with the standard AS A METHOD FOR IDENTIFICATION OF MOVING Ground OBJECTS

    Directory of Open Access Journals (Sweden)

    B. V. Kazbekov

    2014-01-01

    Full Text Available The article focuses on the identification of moving ground targets on board unmanned aerial vehicle. The possibility of realization of algorithm for identification of objects in real-time by comparing the image of the object under consideration and a set of reference images of the objects of the classes are considered. The merit of the developed modification and the results of the experiments are given.

  7. Unmanned ground vehicle perception using thermal infrared cameras

    Science.gov (United States)

    Rankin, Arturo; Huertas, Andres; Matthies, Larry; Bajracharya, Max; Assad, Christopher; Brennan, Shane; Bellutta, Paolo; Sherwin, Gary W.

    2011-05-01

    The ability to perform off-road autonomous navigation at any time of day or night is a requirement for some unmanned ground vehicle (UGV) programs. Because there are times when it is desirable for military UGVs to operate without emitting strong, detectable electromagnetic signals, a passive only terrain perception mode of operation is also often a requirement. Thermal infrared (TIR) cameras can be used to provide day and night passive terrain perception. TIR cameras have a detector sensitive to either mid-wave infrared (MWIR) radiation (3-5μm) or long-wave infrared (LWIR) radiation (7-14μm). With the recent emergence of high-quality uncooled LWIR cameras, TIR cameras have become viable passive perception options for some UGV programs. The Jet Propulsion Laboratory (JPL) has used a stereo pair of TIR cameras under several UGV programs to perform stereo ranging, terrain mapping, tree-trunk detection, pedestrian detection, negative obstacle detection, and water detection based on object reflections. In addition, we have evaluated stereo range data at a variety of UGV speeds, evaluated dual-band TIR classification of soil, vegetation, and rock terrain types, analyzed 24 hour water and 12 hour mud TIR imagery, and analyzed TIR imagery for hazard detection through smoke. Since TIR cameras do not currently provide the resolution available from megapixel color cameras, a UGV's daytime safe speed is often reduced when using TIR instead of color cameras. In this paper, we summarize the UGV terrain perception work JPL has performed with TIR cameras over the last decade and describe a calibration target developed by General Dynamics Robotic Systems (GDRS) for TIR cameras and other sensors.

  8. Unmanned Ground Vehicle Perception Using Thermal Infrared Cameras

    Science.gov (United States)

    Rankin, Arturo; Huertas, Andres; Matthies, Larry; Bajracharya, Max; Assad, Christopher; Brennan, Shane; Bellutta, Paolo; Sherwin, Gary W.

    2011-01-01

    The ability to perform off-road autonomous navigation at any time of day or night is a requirement for some unmanned ground vehicle (UGV) programs. Because there are times when it is desirable for military UGVs to operate without emitting strong, detectable electromagnetic signals, a passive only terrain perception mode of operation is also often a requirement. Thermal infrared (TIR) cameras can be used to provide day and night passive terrain perception. TIR cameras have a detector sensitive to either mid-wave infrared (MWIR) radiation (3-5?m) or long-wave infrared (LWIR) radiation (8-12?m). With the recent emergence of high-quality uncooled LWIR cameras, TIR cameras have become viable passive perception options for some UGV programs. The Jet Propulsion Laboratory (JPL) has used a stereo pair of TIR cameras under several UGV programs to perform stereo ranging, terrain mapping, tree-trunk detection, pedestrian detection, negative obstacle detection, and water detection based on object reflections. In addition, we have evaluated stereo range data at a variety of UGV speeds, evaluated dual-band TIR classification of soil, vegetation, and rock terrain types, analyzed 24 hour water and 12 hour mud TIR imagery, and analyzed TIR imagery for hazard detection through smoke. Since TIR cameras do not currently provide the resolution available from megapixel color cameras, a UGV's daytime safe speed is often reduced when using TIR instead of color cameras. In this paper, we summarize the UGV terrain perception work JPL has performed with TIR cameras over the last decade and describe a calibration target developed by General Dynamics Robotic Systems (GDRS) for TIR cameras and other sensors.

  9. Equivalence of the Symbol Grounding and Quantum System Identification Problems

    Directory of Open Access Journals (Sweden)

    Chris Fields

    2014-02-01

    Full Text Available The symbol grounding problem is the problem of specifying a semantics for the representations employed by a physical symbol system in a way that is neither circular nor regressive. The quantum system identification problem is the problem of relating observational outcomes to specific collections of physical degrees of freedom, i.e., to specific Hilbert spaces. It is shown that with reasonable physical assumptions these problems are equivalent. As the quantum system identification problem is demonstrably unsolvable by finite means, the symbol grounding problem is similarly unsolvable.

  10. Longitudinal static stability requirements for wing in ground effect vehicle

    Science.gov (United States)

    Yang, Wei; Yang, Zhigang; Collu, Maurizio

    2015-06-01

    The issue of the longitudinal stability of a WIG vehicle has been a very critical design factor since the first experimental WIG vehicle has been built. A series of studies had been performed and focused on the longitudinal stability analysis. However, most studies focused on the longitudinal stability of WIG vehicle in cruise phase, and less is available on the longitudinal static stability requirement of WIG vehicle when hydrodynamics are considered: WIG vehicle usually take off from water. The present work focuses on stability requirement for longitudinal motion from taking off to landing. The model of dynamics for a WIG vehicle was developed taking into account the aerodynamic, hydrostatic and hydrodynamic forces, and then was analyzed. Following with the longitudinal static stability analysis, effect of hydrofoil was discussed. Locations of CG, aerodynamic center in pitch, aerodynamic center in height and hydrodynamic center in heave were illustrated for a stabilized WIG vehicle. The present work will further improve the longitudinal static stability theory for WIG vehicle.

  11. Longitudinal static stability requirements for wing in ground effect vehicle

    Directory of Open Access Journals (Sweden)

    Wei Yang

    2015-03-01

    Full Text Available The issue of the longitudinal stability of a WIG vehicle has been a very critical design factor since the first experimental WIG vehicle has been built. A series of studies had been performed and focused on the longitudinal stability analysis. However, most studies focused on the longitudinal stability of WIG vehicle in cruise phase, and less is available on the longitudinal static stability requirement of WIG vehicle when hydrodynamics are considered: WIG vehicle usually take off from water. The present work focuses on stability requirement for longitudinal motion from taking off to landing. The model of dynamics for a WIG vehicle was developed taking into account the aerodynamic, hydrostatic and hydrodynamic forces, and then was analyzed. Following with the longitudinal static stability analysis, effect of hydrofoil was discussed. Locations of CG, aerodynamic center in pitch, aerodynamic center in height and hydrodynamic center in heave were illustrated for a stabilized WIG vehicle. The present work will further improve the longitudinal static stability theory for WIG vehicle.

  12. Longitudinal static stability requirements for wing in ground effect vehicle

    Directory of Open Access Journals (Sweden)

    Yang Wei

    2015-06-01

    Full Text Available The issue of the longitudinal stability of a WIG vehicle has been a very critical design factor since the first experimental WIG vehicle has been built. A series of studies had been performed and focused on the longitudinal stability analysis. However, most studies focused on the longitudinal stability of WIG vehicle in cruise phase, and less is available on the longitudinal static stability requirement of WIG vehicle when hydrodynamics are considered: WIG vehicle usually take off from water. The present work focuses on stability requirement for longitudinal motion from taking off to landing. The model of dynamics for a WIG vehicle was developed taking into account the aerodynamic, hydrostatic and hydrodynamic forces, and then was analyzed. Following with the longitudinal static stability analysis, effect of hydrofoil was discussed. Locations of CG, aerodynamic center in pitch, aerodynamic center in height and hydrodynamic center in heave were illustrated for a stabilized WIG vehicle. The present work will further improve the longitudinal static stability theory for WIG vehicle.

  13. Advanced Mobility Testbed for Dynamic Semi-Autonomous Unmanned Ground Vehicles

    Science.gov (United States)

    2015-04-24

    Introduction Integrated simulation capabilities that are high-fidelity, fast, and have scalable architecture are essential to support autonomous vehicle ...TARDEC has attempted to develop a high-fidelity mobility simulation of an autonomous vehicle in an off-road scenario using integrated sensor...for Dynamic Semi- Autonomous Unmanned Ground Vehicles 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT

  14. Navigation and Hazard Avoidance for High-Speed Unmanned Ground Vehicles in Rough Terrain

    Science.gov (United States)

    2008-07-07

    Potential Field Navigation of High Speed Vehicles on Rough Terrain,” Robotica , Vol. 25, No. 4, pp 409-424, July 2007 Udengaard, M., and Iagnemma, K...Navigation of Unmanned Ground Vehicles on Uneven Terrain using Potential Fields," to appear in Robotica , 2007 [16] Spenko, M., Kuroda, Y., Dubowsky, S

  15. An SINS/GNSS Ground Vehicle Gravimetry Test Based on SGA-WZ02

    Directory of Open Access Journals (Sweden)

    Ruihang Yu

    2015-09-01

    Full Text Available In March 2015, a ground vehicle gravimetry test was implemented in eastern Changsha to assess the repeatability and accuracy of ground vehicle SINS/GNSS gravimeter—SGA-WZ02. The gravity system developed by NUDT consisted of a Strapdown Inertial Navigation System (SINS, a Global Navigation Satellite System (GNSS remote station on test vehicle, a GNSS static master station on the ground, and a data logging subsystem. A south-north profile of 35 km along the highway in eastern Changsha was chosen and four repeated available measure lines were obtained. The average speed of a vehicle is 40 km/h. To assess the external ground gravity disturbances, precise ground gravity data was built by CG-5 precise gravimeter as the reference. Under relative smooth conditions, internal accuracy among repeated lines shows an average agreement at the level of 1.86 mGal for half wavelengths about 1.1 km, and 1.22 mGal for 1.7 km. The root-mean-square (RMS of difference between calculated gravity data and reference data is about 2.27 mGal/1.1 km, and 1.74 mGal/1.7 km. Not all of the noises caused by vehicle itself and experiments environments were eliminated in the primary results. By means of selecting reasonable filters and improving the GNSS observation conditions, further developments in ground vehicle gravimetry are promising.

  16. An SINS/GNSS Ground Vehicle Gravimetry Test Based on SGA-WZ02.

    Science.gov (United States)

    Yu, Ruihang; Cai, Shaokun; Wu, Meiping; Cao, Juliang; Zhang, Kaidong

    2015-09-16

    In March 2015, a ground vehicle gravimetry test was implemented in eastern Changsha to assess the repeatability and accuracy of ground vehicle SINS/GNSS gravimeter-SGA-WZ02. The gravity system developed by NUDT consisted of a Strapdown Inertial Navigation System (SINS), a Global Navigation Satellite System (GNSS) remote station on test vehicle, a GNSS static master station on the ground, and a data logging subsystem. A south-north profile of 35 km along the highway in eastern Changsha was chosen and four repeated available measure lines were obtained. The average speed of a vehicle is 40 km/h. To assess the external ground gravity disturbances, precise ground gravity data was built by CG-5 precise gravimeter as the reference. Under relative smooth conditions, internal accuracy among repeated lines shows an average agreement at the level of 1.86 mGal for half wavelengths about 1.1 km, and 1.22 mGal for 1.7 km. The root-mean-square (RMS) of difference between calculated gravity data and reference data is about 2.27 mGal/1.1 km, and 1.74 mGal/1.7 km. Not all of the noises caused by vehicle itself and experiments environments were eliminated in the primary results. By means of selecting reasonable filters and improving the GNSS observation conditions, further developments in ground vehicle gravimetry are promising.

  17. Image-Based Vehicle Identification Technology for Homeland Security Applications

    Energy Technology Data Exchange (ETDEWEB)

    Clark, G A

    2002-10-08

    The threat of terrorist attacks against US civilian populations is a very real, near-term problem that must be addressed, especially in response to possible use of Weapons of Mass Destruction. Several programs are now being funded by the US Government to put into place means by which the effects of a terrorist attack could be averted or limited through the use of sensors and monitoring technology. Specialized systems that detect certain threat materials, while effective within certain performance limits, cannot generally be used efficiently to track a mobile threat such as a vehicle over a large urban area. The key elements of an effective system are an image feature-based vehicle identification technique and a networked sensor system. We have briefly examined current uses of image and feature recognition techniques to the urban tracking problem and set forth the outlines of a proposal for application of LLNL technologies to this critical problem. The primary contributions of the proposed work lie in filling important needs not addressed by the current program: (1) The ability to create vehicle ''fingerprints,'' or feature information from images to allow automatic identification of vehicles. Currently, the analysis task is done entirely by humans. The goal is to aid the analyst by reducing the amount of data he/she must analyze and reduce errors caused by inattention or lack of training. This capability has broad application to problems associated with extraction of useful features from large data sets. (2) Improvements in the effectiveness of LLNL's WATS (Wide Area Tracking System) by providing it accurate threat vehicle location and velocity. Model predictability is likely to be enhanced by use of more information related to different data sets. We believe that the LLNL can accomplish the proposed tasks and enhance the effectiveness of the system now under development.

  18. 40 CFR 86.079-36 - Submission of vehicle identification numbers.

    Science.gov (United States)

    2010-07-01

    ... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light... numbers. 86.079-36 Section 86.079-36 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or...

  19. New vision system and navigation algorithm for an autonomous ground vehicle

    Science.gov (United States)

    Tann, Hokchhay; Shakya, Bicky; Merchen, Alex C.; Williams, Benjamin C.; Khanal, Abhishek; Zhao, Jiajia; Ahlgren, David J.

    2013-12-01

    Improvements were made to the intelligence algorithms of an autonomously operating ground vehicle, Q, which competed in the 2013 Intelligent Ground Vehicle Competition (IGVC). The IGVC required the vehicle to first navigate between two white lines on a grassy obstacle course, then pass through eight GPS waypoints, and pass through a final obstacle field. Modifications to Q included a new vision system with a more effective image processing algorithm for white line extraction. The path-planning algorithm adopted the vision system, creating smoother, more reliable navigation. With these improvements, Q successfully completed the basic autonomous navigation challenge, finishing tenth out of over 50 teams.

  20. A study on the nondestructive test optimum design for a ground tracked combat vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Kim Byeong Ho; Seo, Jae Hyun; Gil, Hyeon Jun [Defence Agency for Technology and Quality, Seoul (Korea, Republic of); Kim, Seon Hyeong [Hanwha Techwin Co.,Ltd., Changwon (Korea, Republic of); Seo, Sang Chul [Changwon National University, Changwon (Korea, Republic of)

    2015-10-15

    In this study, a nondestructive test (NDT) is performed to inspect the optimal design of a ground tracked combat vehicle for self-propelled artillery, tank, and armored vehicles. The minimum qualification required for personnel performing the NDT of a ground tracked combat vehicle was initially established in US military standards, and then applied to the Korean defense specifications to develop a ground tracked combat vehicle. However, the qualification standards of an NDT inspector have been integrated into NAS410 through the military and commercial specifications unification project that were applied in the existing aerospace/defense industry public standard. The design method for this study was verified by applying the optimal design to the liquid penetrant testing Al forging used in self-propelled artillery. This confirmed the reliability and soundness of the product.

  1. Real-Time and High-Fidelity Simulation Environment for Autonomous Ground Vehicle Dynamics

    Science.gov (United States)

    Cameron, Jonathan; Myint, Steven; Kuo, Calvin; Jain, Abhi; Grip, Havard; Jayakumar, Paramsothy; Overholt, Jim

    2013-01-01

    This paper reports on a collaborative project between U.S. Army TARDEC and Jet Propulsion Laboratory (JPL) to develop a unmanned ground vehicle (UGV) simulation model using the ROAMS vehicle modeling framework. Besides modeling the physical suspension of the vehicle, the sensing and navigation of the HMMWV vehicle are simulated. Using models of urban and off-road environments, the HMMWV simulation was tested in several ways, including navigation in an urban environment with obstacle avoidance and the performance of a lane change maneuver.

  2. TEXT AREA IDENTIFICATION FOR RECOGNIZING DESTINATION PLACES FROM VEHICLES

    Directory of Open Access Journals (Sweden)

    Selvanayaki K.S

    2014-07-01

    Full Text Available Nowadays, automatic detection of text from the vehicles is an important problem in many applications. Text information present in an image can be easily understood by both human and computer. It has wide applications such as license plate reading, sign detection, identification of destination places, mobile text recognition and so on. This problem is challenging due to complex backgrounds, the non-uniform illuminations, variations of text font, size and line orientation. Once the text is identified, it can be analyzed, recognized and interpreted. Hence, there is a need for a better algorithm for detection and localization of text from vehicles. A method is proposed for detecting text from vehicles. The method makes use of features such as Histogram of oriented Gradients (HOG and Local Binary Pattern (LBP. These features are stored which can be further used for feature matching at the time of classification. After the text region is being detected, it can be further subjected to character segmentation and recognition thereby identifying the destination places. The ability to recognize text area from the vehicles, especially buses has obvious applications like traffic management in the bus stands. The obtained results are verified and performance parameters like speed, precision and recall are determined.

  3. Road-Following Formation Control of Autonomous Ground Vehicles

    Science.gov (United States)

    Ono, Masahiro; Droge, Greg; Grip, Havard; Toupet, Olivier; Scrapper, Chris; Rahmani, Amir

    2015-01-01

    This work presents a novel cooperative path planning for formation keeping robots traversing along a road with obstacles and possible narrow passages. A unique challenge in this problem is a requirement for spatial and temporal coordination between vehicles while ensuring collision and obstacle avoidance.

  4. Passive Fuel Tank Inerting Systems for Ground Combat Vehicles

    Science.gov (United States)

    1988-09-01

    34Fire Protection Handbook,"Natioaal girt Pro~dction Association (NFPA), 14th es., Dos on, cu (January 1976) 25 American Petroleum Institute, API ...System on the X60 Series Combat Vehicles," Report No. 79-04A, U.S. Army Tank Automotive Research and Development I Command, DRDTA-V, Warren, MI (October

  5. Ground Vehicle Power and Mobility (GVPM) Powertrain Overview

    Science.gov (United States)

    2011-08-11

    Transmission Multi K Factor Torque converter Powertrain Control and ECM Hardware Development Military Vehicle Fuel Economy Measurement Cycle...Military Engine Optimization Efficiency Gap Transmission -No Torque Converter - Multi-Cone clutches - Wide-spread, equally progressive gear ratios...advanced controls algorithms. • Improved torque capacity, better speed/load matching, reduced thermal loading, and improved control strategy for

  6. Landmark-Based Navigation of an Unmanned Ground Vehicle (UGV)

    Science.gov (United States)

    2009-03-01

    against large measurement errors. 20090710280 RELEASE LIMITATION Approved for public release 4p fv^-Jo-osiit? Published by Weapons Systems Division...achieved as numerous low cost gyroscopes in the market meet this requirement. 24 DSTO-TR-2260 3.5.4 Sensitivity to Vehicle Speed In this subsection

  7. Demonstration of Tar Removal from Paving Equipment and Ground Vehicles

    Science.gov (United States)

    2011-05-12

    difficult job . Red River Army Depot has about 25 vehicles for refurbishing. Other equipment can also be recovered if a convenient solvent and process...solvents including ethyl lactate , dibasic esters, and X-Force were tested with little success. An aqueous solution formulated with

  8. Space vehicle field unit and ground station system

    Energy Technology Data Exchange (ETDEWEB)

    Judd, Stephen; Dallmann, Nicholas; Delapp, Jerry; Proicou, Michael; Seitz, Daniel; Michel, John; Enemark, Donald

    2017-09-19

    A field unit and ground station may use commercial off-the-shelf (COTS) components and share a common architecture, where differences in functionality are governed by software. The field units and ground stations may be easy to deploy, relatively inexpensive, and be relatively easy to operate. A novel file system may be used where datagrams of a file may be stored across multiple drives and/or devices. The datagrams may be received out of order and reassembled at the receiving device.

  9. Modeling and Simulation of an Unmanned Ground Vehicle Power System

    Science.gov (United States)

    2014-03-28

    Wilhelm, A. N., Surgenor, B. W., and Pharoah, J. G., “Design and evaluation of a micro-fuel-cell-based power system for a mobile robot ,” Mechatronics ...of Michigan, Ann Arbor, MI, USA bU.S. Army RDECOM-TARDEC, Warren, MI, USA ABSTRACT Long-duration missions challenge ground robot systems with respect...to energy storage and efficient conversion to power on demand. Ground robot systems can contain multiple power sources such as fuel cell, battery and

  10. Space vehicle field unit and ground station system

    Science.gov (United States)

    Judd, Stephen; Dallmann, Nicholas; Delapp, Jerry; Proicou, Michael; Seitz, Daniel; Michel, John; Enemark, Donald

    2016-10-25

    A field unit and ground station may use commercial off-the-shelf (COTS) components and share a common architecture, where differences in functionality are governed by software. The field units and ground stations may be easy to deploy, relatively inexpensive, and be relatively easy to operate. A novel file system may be used where datagrams of a file may be stored across multiple drives and/or devices. The datagrams may be received out of order and reassembled at the receiving device.

  11. Thruster Modelling for Underwater Vehicle Using System Identification Method

    Directory of Open Access Journals (Sweden)

    Mohd Shahrieel Mohd Aras

    2013-05-01

    Full Text Available This paper describes a study of thruster modelling for a remotely operated underwater vehicle (ROV by system identification using Microbox 2000/2000C. Microbox 2000/2000C is an XPC target machine device to interface between an ROV thruster with the MATLAB 2009 software. In this project, a model of the thruster will be developed first so that the system identification toolbox in MATLAB can be used. This project also presents a comparison of mathematical and empirical modelling. The experiments were carried out by using a mini compressor as a dummy depth pressure applied to a pressure sensor. The thruster model will thrust and submerge until it reaches a set point and maintain the set point depth. The depth was based on pressure sensor measurement. A conventional proportional controller was used in this project and the results gathered justified its selection.

  12. Thruster Modelling for Underwater Vehicle Using System Identification Method

    Directory of Open Access Journals (Sweden)

    Mohd Shahrieel Mohd Aras

    2013-05-01

    Full Text Available Abstract This paper describes a study of thruster modelling for a remotely operated underwater vehicle (ROV by system identification using Microbox 2000/2000C. Microbox 2000/2000C is an XPC target machine device to interface between an ROV thruster with the MATLAB 2009 software. In this project, a model of the thruster will be developed first so that the system identification toolbox in MATLAB can be used. This project also presents a comparison of mathematical and empirical modelling. The experiments were carried out by using a mini compressor as a dummy depth pressure applied to a pressure sensor. The thruster model will thrust and submerge until it reaches a set point and maintain the set point depth. The depth was based on pressure sensor measurement. A conventional proportional controller was used in this project and the results gathered justified its selection.

  13. Simultaneous Planning and Control for Autonomous Ground Vehicles

    Science.gov (United States)

    2009-02-01

    obstacle avoidance were not part of the problem. Pioneering work was done by Dubins during the late 1950’s. He proved that optimal paths connecting a car...motion. Reeds and Shepp extended the work of Dubins to include motion for a vehicle traveling both forwards and backwards [REE91]. There are several...use of receding horizon control for electro -mechanical systems. This limitation is primarily due to the time critical nature of the required control

  14. Unmanned air/ground vehicles heterogeneous cooperative techniques:Current status and prospects

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Multiple unmanned air/ground vehicles heterogeneous cooperation is a novel and challenging filed.Heterogeneous cooperative techniques can widen the application fields of unmanned air or ground vehicles,and enhance the effectiveness of implementing detection,search and rescue tasks.This paper mainly focused on the key issues in multiple unmanned air/ground vehicles heterogeneous cooperation,including heterogeneous flocking,formation control,formation stability,network control,and actual applications.The main problems and future directions in this field were also analyzed in detail.These innovative technologies can significantly enhance the effectiveness of implementing complicated tasks,which definitely provide a series of novel breakthroughs for the intelligence,integration and advancement of future robot systems.

  15. Near real-time operation of public image database for ground vehicle navigation

    Science.gov (United States)

    Ali, E.; Kozaitis, S. P.

    2015-02-01

    An effective color night vision system for ground vehicle navigation should operate in near real-time to be practical. We described a system that uses a public database as a source of color information to colorize night vision imagery. Such an approach presents several problems due to differences between acquired and reference imagery. Our system performed registration, colorizing, and reference updating in near real-time in an effort to help drivers of ground vehicles during night to see a colored view of a scene.

  16. Cooperative Surveillance and Pursuit Using Unmanned Aerial Vehicles and Unattended Ground Sensors

    Science.gov (United States)

    Las Fargeas, Jonathan; Kabamba, Pierre; Girard, Anouck

    2015-01-01

    This paper considers the problem of path planning for a team of unmanned aerial vehicles performing surveillance near a friendly base. The unmanned aerial vehicles do not possess sensors with automated target recognition capability and, thus, rely on communicating with unattended ground sensors placed on roads to detect and image potential intruders. The problem is motivated by persistent intelligence, surveillance, reconnaissance and base defense missions. The problem is formulated and shown to be intractable. A heuristic algorithm to coordinate the unmanned aerial vehicles during surveillance and pursuit is presented. Revisit deadlines are used to schedule the vehicles' paths nominally. The algorithm uses detections from the sensors to predict intruders' locations and selects the vehicles' paths by minimizing a linear combination of missed deadlines and the probability of not intercepting intruders. An analysis of the algorithm's completeness and complexity is then provided. The effectiveness of the heuristic is illustrated through simulations in a variety of scenarios. PMID:25591168

  17. Integrated vehicle control and guidance systems in unmanned ground vehicles for commercial applications

    Science.gov (United States)

    Kenyon, Chase H.

    1995-01-01

    While there is a lot of recent development in the entire IVHS field, very few have had the opportunity to combine the many areas of development into a single integrated `intelligent' unmanned vehicle. One of our systems was developed specifically to serve a major automobile manufacturer's need for an automated vehicle chassis durability test facility. Due to the severity of the road surface human drivers could not be used. A totally automated robotic vehicle driver and guidance system was necessary. In order to deliver fixed price commercial projects now, it was apparent system and component costs were of paramount importance. Cyplex has developed a robust, cost effective single wire guidance system. This system has inherent advantages in system simplicity. Multi-signal (per vehicle lane) systems complicate path planning and layout when multiple lanes and lane changes are required, as on actual highways. The system has demonstrated high enough immunity to rain and light snow cover that normal safety reductions in speed are adequate to stay within the required system performance envelope. This system and it's antenna interface have shown the ability to guide the vehicle at slow speeds (10 MPH) with a tracking repeatability of plus or minus 1/8 of an inch. The basic guide and antenna system has been tested at speeds up to 80 mph. The system has inherently superior abilities for lane changes and precision vehicle placement. The operation of this system will be described and the impact of a system that is commercially viable now for highway and off road use will be discussed.

  18. Inexpensive semi-autonomous ground vehicles for defusing IEDs

    Science.gov (United States)

    Davenport, Chris; Lodmell, James; Womble, Phillip C.; Barzilov, Alexander; Paschal, Jon; Hernandez, Robert; Moss, Kyle T.; Hopper, Lindsay

    2008-04-01

    Improvised explosive devices (IEDs) are an important concern to coalition forces during the conflicts in the Middle East. These devices are responsible for many casualties to American armed forces in the Middle East. These explosives are particularly dangerous because they are improvised with materials readily available to the designer, and there is no systematic way of explosive ordinance disposal. IEDs can be made from things such as standard military ammunition and can be detonated with common electronic devices such as cell phones and garage door openers. There is a great need for a low cost solution to neutralize these IEDs. At the Applied Physics Institute we are building a single function disrupter robot whose sole purpose is to neutralize these IEDs. We are modifying a toy remote control car to control it either wirelessly using WI-FI (IEEE 802.11) or wired by tethering the vehicle with an Ethernet cable (IEEE 802.3). The robot will be equipped with a high velocity fuze disrupter to neutralize the IED as well as a video camera for inspection and aiming purposes. This robot utilizes commercial-off-the-shelf (COTS) components which keeps the cost relatively low. Currently, similar robot systems have been deployed in Iraq and elsewhere but their method of operation is such that it is impractical to use in non-combat situations. We will discuss our design and possible deployment scenarios.

  19. Color night vision system for ground vehicle navigation

    Science.gov (United States)

    Ali, E. A.; Qadir, H.; Kozaitis, S. P.

    2014-06-01

    Operating in a degraded visual environment due to darkness can pose a threat to navigation safety. Systems have been developed to navigate in darkness that depend upon differences between objects such as temperature or reflectivity at various wavelengths. However, adding sensors for these systems increases the complexity by adding multiple components that may create problems with alignment and calibration. An approach is needed that is passive and simple for widespread acceptance. Our approach uses a type of augmented display to show fused images from visible and thermal sensors that are continuously updated. Because the raw fused image gave an unnatural color appearance, we used a color transfer process based on a look-up table to replace the false colors with a colormap derived from a daytime reference image obtained from a public database using the GPS coordinates of the vehicle. Although the database image was not perfectly registered, we were able to produce imagery acquired at night that appeared with daylight colors. Such an approach could improve the safety of nighttime navigation.

  20. Sensor network based vehicle classification and license plate identification system

    Energy Technology Data Exchange (ETDEWEB)

    Frigo, Janette Rose [Los Alamos National Laboratory; Brennan, Sean M [Los Alamos National Laboratory; Rosten, Edward J [Los Alamos National Laboratory; Raby, Eric Y [Los Alamos National Laboratory; Kulathumani, Vinod K [WEST VIRGINIA UNIV.

    2009-01-01

    Typically, for energy efficiency and scalability purposes, sensor networks have been used in the context of environmental and traffic monitoring applications in which operations at the sensor level are not computationally intensive. But increasingly, sensor network applications require data and compute intensive sensors such video cameras and microphones. In this paper, we describe the design and implementation of two such systems: a vehicle classifier based on acoustic signals and a license plate identification system using a camera. The systems are implemented in an energy-efficient manner to the extent possible using commercially available hardware, the Mica motes and the Stargate platform. Our experience in designing these systems leads us to consider an alternate more flexible, modular, low-power mote architecture that uses a combination of FPGAs, specialized embedded processing units and sensor data acquisition systems.

  1. Unmanned Ground Vehicle Navigation and Coverage Hole Patching in Wireless Sensor Networks

    Science.gov (United States)

    Zhang, Guyu

    2013-01-01

    This dissertation presents a study of an Unmanned Ground Vehicle (UGV) navigation and coverage hole patching in coordinate-free and localization-free Wireless Sensor Networks (WSNs). Navigation and coverage maintenance are related problems since coverage hole patching requires effective navigation in the sensor network environment. A…

  2. Foundations for learning and adaptation in a multi-degree-of-freedom unmanned ground vehicle

    Science.gov (United States)

    Blackburn, Michael R.; Bailey, Richard

    2004-04-01

    The real-time coordination and control of a many motion degrees of freedom (dof) unmanned ground vehicle under dynamic conditions in a complex environment is nearly impossible for a human operator to accomplish. Needed are adaptive on-board mechanisms to quickly complete sensor-effector loops to maintain balance and leverage. This paper contains a description of our approach to the control problem for a small unmanned ground vehicle with six dof in the three spatial dimensions. Vehicle control is based upon seven fixed action patterns that exercise all of the motion dof of which the vehicle is capable, and five basic reactive behaviors that protect the vehicle during operation. The reactive behaviors demonstrate short-term adaptations. The learning processes for long-term adaptations of the vehicle control functions that we are implementing are composed of classical and operant conditionings of novel responses to information available from distance sensors (vision and audition) built upon the pre-defined fixed action patterns. The fixed action patterns are in turn modulated by the pre-defined low-level reactive behaviors that, as unconditioned responses, continuously serve to maintain the viability of the robot during the activations of the fixed action patterns, and of the higher-order (conditioned) behaviors. The sensors of the internal environment that govern the low-level reactive behaviors also serve as the criteria for operant conditioning, and satisfy the requirement for basic behavioral motivation.

  3. Identification of potential locations of electric vehicle supply equipment

    Science.gov (United States)

    Brooker, R. Paul; Qin, Nan

    2015-12-01

    Proper placement of electric vehicle supply equipment (charging stations) requires an understanding of vehicle usage patterns. Using data from the National Household Travel Survey on vehicle mileage and destination patterns, analyses were performed to determine electric vehicles' charging needs, as a function of battery size and state of charge. This paper compares electric vehicle charging needs with Department of Energy electric vehicle charging data from real-world charging infrastructure. By combining the electric vehicles charging needs with charging data from real-world applications, locations with high electric vehicle charging likelihood are identified.

  4. A New Curb Detection Method for Unmanned Ground Vehicles Using 2D Sequential Laser Data

    Directory of Open Access Journals (Sweden)

    Jinling Wang

    2013-01-01

    Full Text Available Curb detection is an important research topic in environment perception, which is an essential part of unmanned ground vehicle (UGV operations. In this paper, a new curb detection method using a 2D laser range finder in a semi-structured environment is presented. In the proposed method, firstly, a local Digital Elevation Map (DEM is built using 2D sequential laser rangefinder data and vehicle state data in a dynamic environment and a probabilistic moving object deletion approach is proposed to cope with the effect of moving objects. Secondly, the curb candidate points are extracted based on the moving direction of the vehicle in the local DEM. Finally, the straight and curved curbs are detected by the Hough transform and the multi-model RANSAC algorithm, respectively. The proposed method can detect the curbs robustly in both static and typical dynamic environments. The proposed method has been verified in real vehicle experiments.

  5. MEASUREMENT OF AERODYNAMIC CHARACTERISTICS OF A HANG-GLIDER-WING BY GROUND RUN TESTS USING A TEST VEHICLE

    OpenAIRE

    Hozumi, Koki; KOMODA, Masaki; Ono, Takatsugu; TSUKANO, Yukichi; 穂積, 弘毅; 古茂田, 真幸; 小野, 孝次; 塚野, 雄吉

    1987-01-01

    In order to investigate longitudinal force and moment characteristics of a hang-glider-wing, ground run tests were conducted using a test vehicle. A hang-glider-wing was installed on a test vehicle using a six-components-balance for wind tunnel use. Aerodynamic force and moment were measrued during the vehicle run at various constant speeds. Geometrical twist distribution along the wing span was recorded as well. Measured force and moment data were corrected for possible ground effect and upw...

  6. Function-based design process for an intelligent ground vehicle vision system

    Science.gov (United States)

    Nagel, Robert L.; Perry, Kenneth L.; Stone, Robert B.; McAdams, Daniel A.

    2010-10-01

    An engineering design framework for an autonomous ground vehicle vision system is discussed. We present both the conceptual and physical design by following the design process, development and testing of an intelligent ground vehicle vision system constructed for the 2008 Intelligent Ground Vehicle Competition. During conceptual design, the requirements for the vision system are explored via functional and process analysis considering the flows into the vehicle and the transformations of those flows. The conceptual design phase concludes with a vision system design that is modular in both hardware and software and is based on a laser range finder and camera for visual perception. During physical design, prototypes are developed and tested independently, following the modular interfaces identified during conceptual design. Prototype models, once functional, are implemented into the final design. The final vision system design uses a ray-casting algorithm to process camera and laser range finder data and identify potential paths. The ray-casting algorithm is a single thread of the robot's multithreaded application. Other threads control motion, provide feedback, and process sensory data. Once integrated, both hardware and software testing are performed on the robot. We discuss the robot's performance and the lessons learned.

  7. Towards collaboration between unmanned aerial and ground vehicles for precision agriculture

    Science.gov (United States)

    Bhandari, Subodh; Raheja, Amar; Green, Robert L.; Do, Dat

    2017-05-01

    This paper presents the work being conducted at Cal Poly Pomona on the collaboration between unmanned aerial and ground vehicles for precision agriculture. The unmanned aerial vehicles (UAVs), equipped with multispectral/hyperspectral cameras and RGB cameras, take images of the crops while flying autonomously. The images are post processed or can be processed onboard. The processed images are used in the detection of unhealthy plants. Aerial data can be used by the UAVs and unmanned ground vehicles (UGVs) for various purposes including care of crops, harvest estimation, etc. The images can also be useful for optimized harvesting by isolating low yielding plants. These vehicles can be operated autonomously with limited or no human intervention, thereby reducing cost and limiting human exposure to agricultural chemicals. The paper discuss the autonomous UAV and UGV platforms used for the research, sensor integration, and experimental testing. Methods for ground truthing the results obtained from the UAVs will be used. The paper will also discuss equipping the UGV with a robotic arm for removing the unhealthy plants and/or weeds.

  8. Dynamic Performance on Multi Storey Structure Due to Ground Borne Vibrations Input from Passing Vehicles

    Directory of Open Access Journals (Sweden)

    Tuan Norhayati Tuan Chik

    2013-12-01

    Full Text Available Ground borne vibration from passing vehicles could excite the adjacent ground, hence produces a vibration waves that will propagate through layers of soil towards the foundations of any adjacent building. This vibration could affects the structure of the building at some levels and even the low sensitivity equipment are also could be affected as well. The objectives of this study are to perform the structural response on multi storey building subjected to ground vibrations input and to determine the level of vibration at each floor from road traffic on the observed building. The scopes of the study are focused on the groundborne vibrations induced by the passing vehicles and analyse the data by using dynamic software such as ANSYSv14 and MATLAB. The selected building for this study is the Registrar Office building which is located in Universiti Tun Hussein Onn Malaysia (UTHM. The inputs of the vibration were measured by using Laser Doppler Vibrometer (LDV equipment. By conducting the field measurement, a real input of ground borne vibration from the loads of vehicle towards any adjacent building can be obtained. Finally, the vibration level from road traffic on office building can be determined using overseas generic criteria guidelines. The vibration level achieved for this building is at above the ISO level, which is suitable for office building and within acceptable limit.

  9. Effect of vehicle front end profiles leading to pedestrian secondary head impact to ground.

    Science.gov (United States)

    Gupta, Vishal; Yang, King H

    2013-11-01

    Most studies of pedestrian injuries focus on reducing traumatic injuries due to the primary impact between the vehicle and the pedestrian. However, based on the Pedestrian Crash Data Study (PCDS), some researchers concluded that one of the leading causes of head injury for pedestrian crashes can be attributed to the secondary impact, defined as the impact of the pedestrian with the ground after the primary impact of the pedestrian with the vehicle. The purpose of this study is to understand if different vehicle front-end profiles can affect the risk of pedestrian secondary head impact with the ground and thus help in reducing the risk of head injury during secondary head impact with ground. Pedestrian responses were studied using several front-end profiles based off a mid-size vehicle and a SUV that have been validated previously along with several MADYMO pedestrian models. Mesh morphing is used to explore changes to the bumper height, bonnet leading-edge height, and bonnet rear reference-line height. Simulations leading up to pedestrian secondary impact with ground are conducted at impact speeds of 40 and 30 km/h. In addition, three pedestrian sizes (50th, 5th and 6yr old child) are used to enable us to search for a front-end profile that performs well for multiple sizes of pedestrians, not just one particular size. In most of the simulations, secondary ground impact with pedestrian head/neck/shoulder region occurred. However, there were some front-end profiles that promoted secondary ground impact with pedestrian lower extremities, thus avoiding pedestrian secondary head impact with ground. Previous pedestrian safety research work has suggested the use of active safety methods, such as 'pop up hood', to reduce pedestrian head injury during primary impact. Accordingly, we also conducted simulations using a model with the hood raised to capture the effect of a pop-up hood. These simulations indicated that even though pop-up hood helped reducing the head injury

  10. Distributed pheromone-based swarming control of unmanned air and ground vehicles for RSTA

    Science.gov (United States)

    Sauter, John A.; Mathews, Robert S.; Yinger, Andrew; Robinson, Joshua S.; Moody, John; Riddle, Stephanie

    2008-04-01

    The use of unmanned vehicles in Reconnaissance, Surveillance, and Target Acquisition (RSTA) applications has received considerable attention recently. Cooperating land and air vehicles can support multiple sensor modalities providing pervasive and ubiquitous broad area sensor coverage. However coordination of multiple air and land vehicles serving different mission objectives in a dynamic and complex environment is a challenging problem. Swarm intelligence algorithms, inspired by the mechanisms used in natural systems to coordinate the activities of many entities provide a promising alternative to traditional command and control approaches. This paper describes recent advances in a fully distributed digital pheromone algorithm that has demonstrated its effectiveness in managing the complexity of swarming unmanned systems. The results of a recent demonstration at NASA's Wallops Island of multiple Aerosonde Unmanned Air Vehicles (UAVs) and Pioneer Unmanned Ground Vehicles (UGVs) cooperating in a coordinated RSTA application are discussed. The vehicles were autonomously controlled by the onboard digital pheromone responding to the needs of the automatic target recognition algorithms. UAVs and UGVs controlled by the same pheromone algorithm self-organized to perform total area surveillance, automatic target detection, sensor cueing, and automatic target recognition with no central processing or control and minimal operator input. Complete autonomy adds several safety and fault tolerance requirements which were integrated into the basic pheromone framework. The adaptive algorithms demonstrated the ability to handle some unplanned hardware failures during the demonstration without any human intervention. The paper describes lessons learned and the next steps for this promising technology.

  11. Computational Simulation of Dynamic Response of Vehicle Tatra T815 and the Ground

    Science.gov (United States)

    Vlček, Jozef; Valašková, Veronika

    2016-10-01

    The effect of a moving load represents the actual problem which is analysed in engineering practice. The response of the vehicle and its dynamic effect on the pavement can be analysed by experimental or computational ways. The aim of this paper was to perform computer simulations of a vehicle-ground interaction. For this purpose, a half-part model of heavy lorry Tatra 815 and ground was modelled in computational programmes ADINA and PLAXIS based on FEM methods, utilizing analytical approaches. Two procedures were then selected for further calculations. The first one is based on the simplification of the stiffer pavement layers to the beam element supported by the springs simulating the subgrade layers using Winkler-Pasternak theory of elastic half-space. Modulus of subgrade reaction was determined in the standard programme trough the simulation of a plate load test. Second approach considers a multi-layered ground system with layers of different thicknesses and material properties. For comparison of outputs of both approaches, the same input values were used for every calculation procedure. Crucial parameter for the simulations was the velocity of the passing vehicle with regard to the ground response to the impulse of the pass. Lower velocities result in almost static response of the pavement, but higher velocities induce response that can be better described by the dynamic theory. For small deformations, an elastic material model seems to be sufficient to define the ground response to the moving load, but for larger deformations advanced material models for the ground environment would be more reliable.

  12. On the radar cross section (RCS) prediction of vehicles moving on the ground

    Energy Technology Data Exchange (ETDEWEB)

    Sabihi, Ahmad [Department of Mathematical Sciences, Sharif University of Technology, Tehran (Iran, Islamic Republic of)

    2014-12-10

    As readers should be aware, Radar Cross Section depends on the factors such as: Wave frequency and polarization, Target dimension, angle of ray incidence, Target’s material and covering, Type of radar system as monostatic or bistatic, space in which contains target and propagating waves, and etc. Having moved or stationed in vehicles can be effective in RCS values. Here, we investigate effective factors in RCS of moving targets on the ground or sea. Image theory in electromagnetic applies to be taken into account RCS of a target over the ground or sea.

  13. Crack identification for rigid pavements using unmanned aerial vehicles

    Science.gov (United States)

    Bahaddin Ersoz, Ahmet; Pekcan, Onur; Teke, Turker

    2017-09-01

    Pavement condition assessment is an essential piece of modern pavement management systems as rehabilitation strategies are planned based upon its outcomes. For proper evaluation of existing pavements, they must be continuously and effectively monitored using practical means. Conventionally, truck-based pavement monitoring systems have been in-use in assessing the remaining life of in-service pavements. Although such systems produce accurate results, their use can be expensive and data processing can be time consuming, which make them infeasible considering the demand for quick pavement evaluation. To overcome such problems, Unmanned Aerial Vehicles (UAVs) can be used as an alternative as they are relatively cheaper and easier-to-use. In this study, we propose a UAV based pavement crack identification system for monitoring rigid pavements’ existing conditions. The system consists of recently introduced image processing algorithms used together with conventional machine learning techniques, both of which are used to perform detection of cracks on rigid pavements’ surface and their classification. Through image processing, the distinct features of labelled crack bodies are first obtained from the UAV based images and then used for training of a Support Vector Machine (SVM) model. The performance of the developed SVM model was assessed with a field study performed along a rigid pavement exposed to low traffic and serious temperature changes. Available cracks were classified using the UAV based system and obtained results indicate it ensures a good alternative solution for pavement monitoring applications.

  14. Large eddy simulation of flows around ground vehicles and other bluff bodies.

    Science.gov (United States)

    Krajnovic, Sinisa

    2009-07-28

    A brief review of large eddy simulation (LES) applications for different bluff-body flows performed by the author and his co-workers is presented. Examples of flows range from simple cube flows characterized by sharp edge separation over a three-dimensional hill where LES relies on good near-wall resolution, to complex flows of a tall, finite cylinder that contains several flow regimes that cause different challenges to LES. The second part of the paper is devoted to flows around ground vehicles at moderate Reynolds numbers. Although the present review proves the applicability of LES for various bluff-body flows, an increase of the Reynolds number towards the operational speeds of ground vehicles requires accurate near-wall modelling for a successful LES.

  15. Study on shift schedule saving energy of automatic transmission of ground vehicles

    Institute of Scientific and Technical Information of China (English)

    龚捷; 赵丁选; 陈鹰; 陈宁

    2004-01-01

    To improve ground vehicle efficiency, shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetrain. The shift schedule can keep the torque converter working in the high efficiency range under all the working conditions except in the low efficiency range on the left when the transmission worked at the lowest shift, and in the low efficiency range on the right when the transmission worked at the highest shift. The shift quality key factors were analysed. The automatic trans-mission's bench-test adopting this shift schedule was made on the automatic transmission's test-bed. The experimental results showed that the shift schedule was correct and that the shift quality was controllable.

  16. Control and learning for intelligent mobility of unmanned ground vehicles in complex terrains

    Science.gov (United States)

    Trentini, M.; Beckman, B.; Digney, B.

    2005-05-01

    The Autonomous Intelligent Systems program at Defence R&D Canada-Suffield envisions autonomous systems contributing to decisive operations in the urban battle space. Creating effective intelligence for these systems demands advances in perception, world representation, navigation, and learning. In the land environment, these scientific areas have garnered much attention, while largely ignoring the problem of locomotion in complex terrain. This is a gap in robotics research, where sophisticated algorithms are needed to coordinate and control robotic locomotion in unknown, highly complex environments. Unlike traditional control problems, intuitive and systematic control tools for robotic locomotion do not readily exist thus limiting their practical application. This paper addresses the mobility problem for unmanned ground vehicles, defined here as the autonomous maneuverability of unmanned ground vehicles in unknown, highly complex environments. It discusses the progress and future direction of intelligent mobility research at Defence R&D Canada-Suffield and presents the research tools, topics and plans to address this critical research gap.

  17. The on-line electric vehicle wireless electric ground transportation systems

    CERN Document Server

    Cho, Dong

    2017-01-01

    This book details the design and technology of the on-line electric vehicle (OLEV) system and its enabling wireless power-transfer technology, the “shaped magnetic field in resonance” (SMFIR). The text shows how OLEV systems can achieve their three linked important goals: reduction of CO2 produced by ground transportation; improved energy efficiency of ground transportation; and contribution to the amelioration or prevention of climate change and global warming. SMFIR provides power to the OLEV by wireless transmission from underground cables using an alternating magnetic field and the reader learns how this is done. This cable network will in future be part of any local smart grid for energy supply and use thereby exploiting local and renewable energy generation to further its aims. In addition to the technical details involved with design and realization of a fleet of vehicles combined with extensive subsurface charging infrastructure, practical issues such as those involved with pedestrian safety are c...

  18. Study on shift schedule saving energy of automatic transmission of ground vehicles

    Institute of Scientific and Technical Information of China (English)

    龚捷; 赵丁选; 陈鹰; 陈宁

    2004-01-01

    To improve ground vehicle efficiency,shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetrain.The shift schedule can keep the torque converter working in the high efficiency range under all the working conditions except in the low efficiency range on the left when the transmission worked at the lowest shift,and in the low efficiency range on the right when the transmission worked at the highest shift.The shift quality key factors were analysed.The automatic transmission's bench-test adopting this shift schedule was made on the automatic transmission's test-bed.The experimental results showed that the shift schedule was correct and that the shift quality was controllable.

  19. Robust H∞ output-feedback control for path following of autonomous ground vehicles

    Science.gov (United States)

    Hu, Chuan; Jing, Hui; Wang, Rongrong; Yan, Fengjun; Chadli, Mohammed

    2016-03-01

    This paper presents a robust H∞ output-feedback control strategy for the path following of autonomous ground vehicles (AGVs). Considering the vehicle lateral velocity is usually hard to measure with low cost sensor, a robust H∞ static output-feedback controller based on the mixed genetic algorithms (GA)/linear matrix inequality (LMI) approach is proposed to realize the path following without the information of the lateral velocity. The proposed controller is robust to the parametric uncertainties and external disturbances, with the parameters including the tire cornering stiffness, vehicle longitudinal velocity, yaw rate and road curvature. Simulation results based on CarSim-Simulink joint platform using a high-fidelity and full-car model have verified the effectiveness of the proposed control approach.

  20. Cooperative Surveillance and Pursuit Using Unmanned Aerial Vehicles and Unattended Ground Sensors

    Directory of Open Access Journals (Sweden)

    Jonathan Las Fargeas

    2015-01-01

    Full Text Available This paper considers the problem of path planning for a team of unmanned aerial vehicles performing surveillance near a friendly base. The unmanned aerial vehicles do not possess sensors with automated target recognition capability and, thus, rely on communicating with unattended ground sensors placed on roads to detect and image potential intruders. The problem is motivated by persistent intelligence, surveillance, reconnaissance and base defense missions. The problem is formulated and shown to be intractable. A heuristic algorithm to coordinate the unmanned aerial vehicles during surveillance and pursuit is presented. Revisit deadlines are used to schedule the vehicles’ paths nominally. The algorithm uses detections from the sensors to predict intruders’ locations and selects the vehicles’ paths by minimizing a linear combination of missed deadlines and the probability of not intercepting intruders. An analysis of the algorithm’s completeness and complexity is then provided. The effectiveness of the heuristic is illustrated through simulations in a variety of scenarios.

  1. Constrained low-cost GPS/INS filter with encoder bias estimation for ground vehicles' applications

    Science.gov (United States)

    Abdel-Hafez, Mamoun F.; Saadeddin, Kamal; Amin Jarrah, Mohammad

    2015-06-01

    In this paper, a constrained, fault-tolerant, low-cost navigation system is proposed for ground vehicle's applications. The system is designed to provide a vehicle navigation solution at 50 Hz by fusing the measurements of the inertial measurement unit (IMU), the global positioning system (GPS) receiver, and the velocity measurement from wheel encoders. A high-integrity estimation filter is proposed to obtain a high accuracy state estimate. The filter utilizes vehicle velocity constraints measurement to enhance the estimation accuracy. However, if the velocity measurement of the encoder is biased, the accuracy of the estimate is degraded. Therefore, a noise estimation algorithm is proposed to estimate a possible bias in the velocity measurement of the encoder. Experimental tests, with simulated biases on the encoder's readings, are conducted and the obtained results are presented. The experimental results show the enhancement in the estimation accuracy when the simulated bias is estimated using the proposed method.

  2. Identification of rainy periods from ground based microwave radiometry

    Directory of Open Access Journals (Sweden)

    Ada Vittoria Bosisio

    2012-03-01

    Full Text Available In this paper the authors present the results of a study aiming at detecting rainy data in measurements collected by a dual band ground-based radiometer. The proposed criterion is based on the ratio of the brightness temperatures observed in the 20-30 GHz band without need of any ancillary information. A major result obtained from the probability density of the ratio computed over one month of data is the identification of threshold values between clear sky, cloudy sky and rainy sky, respectively. A linear fit performed by using radiometric data and concurrent rain gauge measurements shows a correlation coefficient equal to 0.56 between the temperature ratio and the observed precipitation.

  3. Test Operations Procedure (TOP) 02-2-546 Teleoperated Unmanned Ground Vehicle (UGV) Latency Measurements

    Science.gov (United States)

    2017-01-11

    A. Approved for public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES Defense Technical Information Center (DTIC), AD No.: 14. ABSTRACT...discrete system components or measurements of latency in autonomous systems. 15. SUBJECT TERMS Unmanned Ground Vehicles, Basic Video Latency, End -to... End System Latency, Command-to-Action Latency 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER OF PAGES 23 19a

  4. Using acoustic sensor technologies to create a more terrain capable unmanned ground vehicle

    OpenAIRE

    Odedra, Sid; Prior, Stephen D.; Karamanoglu, Mehmet; Erbil, Mehmet Ali; Shen, Siu-Tsen; International Conference on Engineering Psychology and Cognitive Ergonomics

    2009-01-01

    Unmanned Ground Vehicle’s (UGV) have to cope with the most complex range of dynamic and variable obstacles and therefore need to be highly intelligent in order to cope with navigating in such a cluttered environment. When traversing over different terrains (whether it is a UGV or a commercial manned vehicle) different drive styles and configuration settings need to be selected in order to travel successfully over each terrain type. These settings are usually selected by a human operator in ma...

  5. Using High Performance Computing to Realize a System-Level RDDO for Military Ground Vehicles

    Science.gov (United States)

    2008-07-14

    Using High Performance Computing to Realize a System-Level RBDO for Military Ground Vehicles • David A. Lamb, Ph.D. • Computational Reliability and...fictitious load cases is number of design variables X number of static load cases (6 X 24 = 144 for Stryker A-arm). RBDO Flowchart Pre-processor Morpher...Based Geometry Morpher Mesh Finite Element Analysis Durability Sensitivity RBDO /PBDO FE Analysis FE re-analysis for DSA Sensitivity of SIC and Fatigue

  6. Determining the Forces Generated by the Contact of an Electrically-Operated Vehicle with the Ground

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In this paper we analyse the motion of an electric vehicle,when there is only the pure rolling of the wheels on the ground.The equations of holonomic and non-holonomic constraints have been rendered explicitly obtaining 27 equations algebraic-differential system with the same number of unknowns.Besides,this system supplies a model to calculate the bonding reaction forces.

  7. The 21st annual intelligent ground vehicle competition: robotists for the future

    Science.gov (United States)

    Theisen, Bernard L.

    2013-12-01

    The Intelligent Ground Vehicle Competition (IGVC) is one of four, unmanned systems, student competitions that were founded by the Association for Unmanned Vehicle Systems International (AUVSI). The IGVC is a multidisciplinary exercise in product realization that challenges college engineering student teams to integrate advanced control theory, machine vision, vehicular electronics and mobile platform fundamentals to design and build an unmanned system. Teams from around the world focus on developing a suite of dual-use technologies to equip ground vehicles of the future with intelligent driving capabilities. Over the past 21 years, the competition has challenged undergraduate, graduate and Ph.D. students with real world applications in intelligent transportation systems, the military and manufacturing automation. To date, teams from over 80 universities and colleges have participated. This paper describes some of the applications of the technologies required by this competition and discusses the educational benefits. The primary goal of the IGVC is to advance engineering education in intelligent vehicles and related technologies. The employment and professional networking opportunities created for students and industrial sponsors through a series of technical events over the fourday competition are highlighted. Finally, an assessment of the competition based on participation is presented.

  8. The 20th annual intelligent ground vehicle competition: building a generation of robotists

    Science.gov (United States)

    Theisen, Bernard L.; Kosinski, Andrew

    2013-01-01

    The Intelligent Ground Vehicle Competition (IGVC) is one of four, unmanned systems, student competitions that were founded by the Association for Unmanned Vehicle Systems International (AUVSI). The IGVC is a multidisciplinary exercise in product realization that challenges college engineering student teams to integrate advanced control theory, machine vision, vehicular electronics and mobile platform fundamentals to design and build an unmanned system. Teams from around the world focus on developing a suite of dual-use technologies to equip ground vehicles of the future with intelligent driving capabilities. Over the past 20 years, the competition has challenged undergraduate, graduate and Ph.D. students with real world applications in intelligent transportation systems, the military and manufacturing automation. To date, teams from over 80 universities and colleges have participated. This paper describes some of the applications of the technologies required by this competition and discusses the educational benefits. The primary goal of the IGVC is to advance engineering education in intelligent vehicles and related technologies. The employment and professional networking opportunities created for students and industrial sponsors through a series of technical events over the four-day competition are highlighted. Finally, an assessment of the competition based on participation is presented.

  9. Resolving ranges of layered objects using ground vehicle LiDAR

    Science.gov (United States)

    Hollinger, Jim; Kutscher, Brett; Close, Ryan

    2015-06-01

    Lidar systems are well known for their ability to measure three-dimensional aspects of a scene. This attribute of Lidar has been widely exploited by the robotics community, among others. The problem of resolving ranges of layered objects (such as a tree canopy over the forest floor) has been studied from the perspective of airborne systems. However, little research exists in studying this problem from a ground vehicle system (e.g., a bush covering a rock or other hazard). This paper discusses the issues involved in solving this problem from a ground vehicle. This includes analysis of extracting multi-return data from Lidar and the various laser properties that impact the ability to resolve multiple returns, such as pulse length and beam size. The impacts of these properties are presented as they apply to three different Lidar imaging technologies: scanning pulse Lidar, Geiger-mode flash Lidar, and Time-of-Flight camera. Tradeoffs associated with these impacts are then discussed for a ground vehicle Lidar application.

  10. 美军无人地面车辆发展综述%Development Survey of US Army Unmanned Ground Vehicles

    Institute of Scientific and Technical Information of China (English)

    陈欣; 王立操; 李联邦; 左志奇

    2012-01-01

    US army unmanned ground vehicles are primitively introduced. The development course of US army unmanned ground vehicles is expatiated, present condition and development trends are given. Some suggestions on developing military unmanned ground vehicles are presented.%对美军无人地面车辆进行简要介绍,阐述美军无人地面车辆发展历程,给出了其研究现状与趋势,提出了对我国无人地面车辆发展的几点启示。

  11. Control performance evaluation of railway vehicle MR suspension using fuzzy sky-ground hook control algorithm

    Science.gov (United States)

    Ha, S. H.; Choi, S. B.; Lee, G. S.; Yoo, W. H.

    2013-02-01

    This paper presents control performance evaluation of railway vehicle featured by semi-active suspension system using magnetorheological (MR) fluid damper. In order to achieve this goal, a nine degree of freedom of railway vehicle model, which includes car body and bogie, is established. The wheel-set data is loaded from measured value of railway vehicle. The MR damper system is incorporated with the governing equation of motion of the railway vehicle model which includes secondary suspension. To illustrate the effectiveness of the controlled MR dampers on suspension system of railway vehicle, the control law using the sky-ground hook controller is adopted. This controller takes into account for both vibration control of car body and increasing stability of bogie by adopting a weighting parameter between two performance requirements. The parameters appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the lateral speed of the car body and the lateral performance of the bogie. Computer simulation results of control performances such as vibration control and stability analysis are presented in time and frequency domains.

  12. Person re-identification across aerial and ground-based cameras by deep feature fusion

    Science.gov (United States)

    Schumann, Arne; Metzler, Jürgen

    2017-05-01

    Person re-identification is the task of correctly matching visual appearances of the same person in image or video data while distinguishing appearances of different persons. The traditional setup for re-identification is a network of fixed cameras. However, in recent years mobile aerial cameras mounted on unmanned aerial vehicles (UAV) have become increasingly useful for security and surveillance tasks. Aerial data has many characteristics different from typical camera network data. Thus, re-identification approaches designed for a camera network scenario can be expected to suffer a drop in accuracy when applied to aerial data. In this work, we investigate the suitability of features, which were shown to give robust results for re- identification in camera networks, for the task of re-identifying persons between a camera network and a mobile aerial camera. Specifically, we apply hand-crafted region covariance features and features extracted by convolu- tional neural networks which were learned on separate data. We evaluate their suitability for this new and as yet unexplored scenario. We investigate common fusion methods to combine the hand-crafted and learned features and propose our own deep fusion approach which is already applied during training of the deep network. We evaluate features and fusion methods on our own dataset. The dataset consists of fourteen people moving through a scene recorded by four fixed ground-based cameras and one mobile camera mounted on a small UAV. We discuss strengths and weaknesses of the features in the new scenario and show that our fusion approach successfully leverages the strengths of each feature and outperforms all single features significantly.

  13. System Identification and Automatic Mass Balancing of Ground-Based Three-Axis Spacecraft Simulator

    Science.gov (United States)

    2006-08-01

    System Identification and Automatic Mass Balancing of Ground-Based Three-Axis Spacecraft Simulator Jae-Jun Kim∗ and Brij N. Agrawal † Department of...TITLE AND SUBTITLE System Identification and Automatic Mass Balancing of Ground-Based Three-Axis Spacecraft Simulator 5a. CONTRACT NUMBER 5b...and Dynamics, Vol. 20, No. 4, July-August 1997, pp. 625-632. 6Schwartz, J. L. and Hall, C. D., “ System Identification of a Spherical Air-Bearing

  14. Hybrid Map-Based Navigation Method for Unmanned Ground Vehicle in Urban Scenario

    Directory of Open Access Journals (Sweden)

    Huiyan Chen

    2013-07-01

    Full Text Available To reduce the data size of metric map and map matching computational cost in unmanned ground vehicle self-driving navigation in urban scenarios, a metric-topological hybrid map navigation system is proposed in this paper. According to the different positioning accuracy requirements, urban areas are divided into strong constraint (SC areas, such as roads with lanes, and loose constraint (LC areas, such as intersections and open areas. As direction of the self-driving vehicle is provided by traffic lanes and global waypoints in the road network, a simple topological map is fit for the navigation in the SC areas. While in the LC areas, the navigation of the self-driving vehicle mainly relies on the positioning information. Simultaneous localization and mapping technology is used to provide a detailed metric map in the LC areas, and a window constraint Markov localization algorithm is introduced to achieve accurate position using laser scanner. Furthermore, the real-time performance of the Markov algorithm is enhanced by using a constraint window to restrict the size of the state space. By registering the metric maps into the road network, a hybrid map of the urban scenario can be constructed. Real unmanned vehicle mapping and navigation tests demonstrated the capabilities of the proposed method.

  15. Passive Night Vision Sensor Comparison for Unmanned Ground Vehicle Stereo Vision Navigation

    Science.gov (United States)

    Owens, Ken; Matthies, Larry

    2000-01-01

    One goal of the "Demo III" unmanned ground vehicle program is to enable autonomous nighttime navigation at speeds of up to 10 m.p.h. To perform obstacle detection at night with stereo vision will require night vision cameras that produce adequate image quality for the driving speeds, vehicle dynamics, obstacle sizes, and scene conditions that will be encountered. This paper analyzes the suitability of four classes of night vision cameras (3-5 micrometer cooled FLIR, 8-12 micrometer cooled FLIR, 8-12 micrometer uncooled FLIR, and image intensifiers) for night stereo vision, using criteria based on stereo matching quality, image signal to noise ratio, motion blur and synchronization capability. We find that only cooled FLIRs will enable stereo vision performance that meets the goals of the Demo III program for nighttime autonomous mobility.

  16. LWIR passive perception system for stealthy unmanned ground vehicle night operations

    Science.gov (United States)

    Lee, Daren; Rankin, Arturo; Huertas, Andres; Nash, Jeremy; Ahuja, Gaurav; Matthies, Larry

    2016-05-01

    Resupplying forward-deployed units in rugged terrain in the presence of hostile forces creates a high threat to manned air and ground vehicles. An autonomous unmanned ground vehicle (UGV) capable of navigating stealthily at night in off-road and on-road terrain could significantly increase the safety and success rate of such resupply missions for warfighters. Passive night-time perception of terrain and obstacle features is a vital requirement for such missions. As part of the ONR 30 Autonomy Team, the Jet Propulsion Laboratory developed a passive, low-cost night-time perception system under the ONR Expeditionary Maneuver Warfare and Combating Terrorism Applied Research program. Using a stereo pair of forward looking LWIR uncooled microbolometer cameras, the perception system generates disparity maps using a local window-based stereo correlator to achieve real-time performance while maintaining low power consumption. To overcome the lower signal-to-noise ratio and spatial resolution of LWIR thermal imaging technologies, a series of pre-filters were applied to the input images to increase the image contrast and stereo correlator enhancements were applied to increase the disparity density. To overcome false positives generated by mixed pixels, noisy disparities from repeated textures, and uncertainty in far range measurements, a series of consistency, multi-resolution, and temporal based post-filters were employed to improve the fidelity of the output range measurements. The stereo processing leverages multi-core processors and runs under the Robot Operating System (ROS). The night-time passive perception system was tested and evaluated on fully autonomous testbed ground vehicles at SPAWAR Systems Center Pacific (SSC Pacific) and Marine Corps Base Camp Pendleton, California. This paper describes the challenges, techniques, and experimental results of developing a passive, low-cost perception system for night-time autonomous navigation.

  17. Nano-based chemical sensor array systems for uninhabited ground and airborne vehicles

    Science.gov (United States)

    Brantley, Christina; Ruffin, Paul B.; Edwards, Eugene

    2009-03-01

    In a time when homemade explosive devices are being used against soldiers and in the homeland security environment, it is becoming increasingly evident that there is an urgent need for high-tech chemical sensor packages to be mounted aboard ground and air vehicles to aid soldiers in determining the location of explosive devices and the origin of bio-chemical warfare agents associated with terrorist activities from a safe distance. Current technologies utilize relatively large handheld detection systems that are housed on sizeable robotic vehicles. Research and development efforts are underway at the Army Aviation & Missile Research, Development, and Engineering Center (AMRDEC) to develop novel and less expensive nano-based chemical sensors for detecting explosives and chemical agents used against the soldier. More specifically, an array of chemical sensors integrated with an electronics control module on a flexible substrate that can conform to and be surface-mounted to manned or unmanned vehicles to detect harmful species from bio-chemical warfare and other explosive devices is being developed. The sensor system under development is a voltammetry-based sensor system capable of aiding in the detection of any chemical agent and in the optimization of sensor microarray geometry to provide nonlinear Fourier algorithms to characterize target area background (e.g., footprint areas). The status of the research project is reviewed in this paper. Critical technical challenges associated with achieving system cost, size, and performance requirements are discussed. The results obtained from field tests using an unmanned remote controlled vehicle that houses a CO2/chemical sensor, which detects harmful chemical agents and wirelessly transmits warning signals back to the warfighter, are presented. Finally, the technical barriers associated with employing the sensor array system aboard small air vehicles will be discussed.

  18. Impact of mesh tracks and low-ground-pressure vehicle use on blanket peat hydrology

    Science.gov (United States)

    McKendrick-Smith, Kathryn; Holden, Joseph; Parry, Lauren

    2016-04-01

    Peatlands are subject to multiple uses including drainage, farming and recreation. Low-ground-pressure vehicle access is desirable by land owners and tracks facilitate access. However, there is concern that such activity may impact peat hydrology and so granting permission for track installation has been problematic, particularly without evidence for decision-making. We present the first comprehensive study of mesh track and low-ground-pressure vehicle impacts on peatland hydrology. In the sub-arctic oceanic climate of the Moor House World Biosphere Reserve in the North Pennines, UK, a 1.5 km long experimental track was installed to investigate hydrological impacts. Surface vegetation was cut and the plastic mesh track pinned into the peat surface. The experimental track was split into 7 treatments, designed to reflect typical track usage (0 - 5 vehicle passes per week) and varying vehicle weight. The greatest hydrological impacts were expected for sections of track subject to more frequent vehicle use and in close proximity to the track. In total 554 dipwells (including 15 automated recording at 15-min intervals) were monitored for water-table depth, positioned to capture potential spatial variability in response. Before track installation, samples for vertical and lateral hydraulic conductivity (Ks) analysis (using the modified cube method) were taken at 0-10 cm depth from a frequently driven treatment (n = 15), an infrequently driven treatment (0.5 passes per week) (n = 15) and a control site with no track/driving (n = 15). The test was repeated after 16 months of track use. We present a spatially and temporally rich water-table dataset from the study site showing how the impacts of the track on water table are spatially highly variable. Water-table depths across the site were shallow, typically within the upper 10 cm of the peat profile for > 75% of the time. We show that mesh track and low-ground-pressure vehicle impacts on water-table depth were small except

  19. Vehicle Theft Alert and Location Identification Using GSM, GPS and Web Technologies

    Directory of Open Access Journals (Sweden)

    Garba Suleiman

    2016-07-01

    Full Text Available Insecurity is one of the major challenges that the entire world is facing now, each country having their peculiar security issues. The crime rate in every part of the society these days has become a threatening issue such that vehicles are now used for committing criminal activities more than before. The issue of vehicle theft has increased tremendously, mostly at gunpoint or car parks. In view of these, there is a need for adequate records of stolen, identified and recovered vehicles which are not readily available in our society and as such very important. The development of a vehicle theft alert and location identification system becomes more necessary for vehicle owners to ensure theft prevention and a speedy identification towards recovery efforts in situations where a vehicle is missing, stolen or driven by an unauthorized person. The theft alert function makes use of a GSM application developed and installed in a mobile phone device which is embedded in the vehicle to communicate with the vehicle owner’s mobile phone. The communication is established via SMS (i.e. between the installed mobile phone device and that of the vehicle owner. The communications established include; (i. Sending an SMS alert from installed mobile phone device to vehicle owner mobile phone when the car ignition is put on. (ii. Sending an SMS from the vehicle owner’s mobile phone to start and stop the installed mobile phone device application. The location identification function makes use of a web application developed to; (i. Determine the real time location of a vehicle by means of tracking using GPS. (ii. Broadcast missing or stolen vehicle information to social media and security agency. The implementation of the installed mobile phone device application was done using JAVA because of its capabilities in programming mobile applications while PHP and MySQL was used for the web application functions. Integration testing of the system was carried out using

  20. Research on identification method of heavy vehicle rollover based on hidden Markov model

    Science.gov (United States)

    Zhao, Zhiguo; Wang, Yeqin; Hu, Xiaoming; Tao, Yukai; Wang, Jinsheng

    2017-07-01

    Aiming at the problem of early warning credibility degradation as the heavy vehicle load and its center of gravity change greatly; the heavy vehicle rollover state identification method based on the Hidden Markov Model (HMM, is introduced to identify heavy vehicle lateral conditions dynamically in this paper. In this method, the lateral acceleration and roll angle are taken as the observation values of the model base. The Viterbi algorithm is used to predict the state sequence with the highest probability in the observed sequence, and the Markov prediction algorithm is adopted to calculate the state transition law and to predict the state of the vehicle in a certain period of time in the future. According to combination conditions of Double lane change and steering, applying Trucksim and Matlab trained hidden Markov model, the model is applied to the online identification of heavy vehicle rollover states. The identification results show that the model can accurately and efficiently identify the vehicle rollover state, and has good applicability. This study provides a novel method and a general strategy for active safety early warning and control of vehicles, which has reference significance for the application of the Hidden Markov theory in collision, rear-end and lane departure warning system.

  1. Estimation of longitudinal speed robust to road conditions for ground vehicles

    Science.gov (United States)

    Hashemi, Ehsan; Kasaiezadeh, Alireza; Khosravani, Saeid; Khajepour, Amir; Moshchuk, Nikolai; Chen, Shih-Ken

    2016-08-01

    This article seeks to develop a longitudinal vehicle velocity estimator robust to road conditions by employing a tyre model at each corner. Combining the lumped LuGre tyre model and the vehicle kinematics, the tyres internal deflection state is used to gain an accurate estimation. Conventional kinematic-based velocity estimators use acceleration measurements, without correction with the tyre forces. However, this results in inaccurate velocity estimation because of sensor uncertainties which should be handled with another measurement such as tyre forces that depend on unknown road friction. The new Kalman-based observer in this paper addresses this issue by considering tyre nonlinearities with a minimum number of required tyre parameters and the road condition as uncertainty. Longitudinal forces obtained by the unscented Kalman filter on the wheel dynamics is employed as an observation for the Kalman-based velocity estimator at each corner. The stability of the proposed time-varying estimator is investigated and its performance is examined experimentally in several tests and on different road surface frictions. Road experiments and simulation results show the accuracy and robustness of the proposed approach in estimating longitudinal speed for ground vehicles.

  2. Monocular Camera/IMU/GNSS Integration for Ground Vehicle Navigation in Challenging GNSS Environments

    Directory of Open Access Journals (Sweden)

    Dennis Akos

    2012-03-01

    Full Text Available Low-cost MEMS-based IMUs, video cameras and portable GNSS devices are commercially available for automotive applications and some manufacturers have already integrated such facilities into their vehicle systems. GNSS provides positioning, navigation and timing solutions to users worldwide. However, signal attenuation, reflections or blockages may give rise to positioning difficulties. As opposed to GNSS, a generic IMU, which is independent of electromagnetic wave reception, can calculate a high-bandwidth navigation solution, however the output from a self-contained IMU accumulates errors over time. In addition, video cameras also possess great potential as alternate sensors in the navigation community, particularly in challenging GNSS environments and are becoming more common as options in vehicles. Aiming at taking advantage of these existing onboard technologies for ground vehicle navigation in challenging environments, this paper develops an integrated camera/IMU/GNSS system based on the extended Kalman filter (EKF. Our proposed integration architecture is examined using a live dataset collected in an operational traffic environment. The experimental results demonstrate that the proposed integrated system provides accurate estimations and potentially outperforms the tightly coupled GNSS/IMU integration in challenging environments with sparse GNSS observations.

  3. Monocular camera/IMU/GNSS integration for ground vehicle navigation in challenging GNSS environments.

    Science.gov (United States)

    Chu, Tianxing; Guo, Ningyan; Backén, Staffan; Akos, Dennis

    2012-01-01

    Low-cost MEMS-based IMUs, video cameras and portable GNSS devices are commercially available for automotive applications and some manufacturers have already integrated such facilities into their vehicle systems. GNSS provides positioning, navigation and timing solutions to users worldwide. However, signal attenuation, reflections or blockages may give rise to positioning difficulties. As opposed to GNSS, a generic IMU, which is independent of electromagnetic wave reception, can calculate a high-bandwidth navigation solution, however the output from a self-contained IMU accumulates errors over time. In addition, video cameras also possess great potential as alternate sensors in the navigation community, particularly in challenging GNSS environments and are becoming more common as options in vehicles. Aiming at taking advantage of these existing onboard technologies for ground vehicle navigation in challenging environments, this paper develops an integrated camera/IMU/GNSS system based on the extended Kalman filter (EKF). Our proposed integration architecture is examined using a live dataset collected in an operational traffic environment. The experimental results demonstrate that the proposed integrated system provides accurate estimations and potentially outperforms the tightly coupled GNSS/IMU integration in challenging environments with sparse GNSS observations.

  4. The IXV vehicle model identification subsystem: Off-line estimation framework

    Science.gov (United States)

    Béjar-Romero, J. A.; Bidaux-Sokolowski, A.; Maina, S.; Preaud, J. P.

    2016-07-01

    The Intermediate eXperimental Vehicle (IXV) is an ESA re-entry technological platform built to verify in-flight the performance of critical re-entry technologies. The successful flight of the IXV provides the key elements to consolidate the knowledge necessary for the development of future European re-entry systems. The exploitation of in-flight data represents a cornerstone for this flying test bench. In this frame the IXV Vehicle Model Identification subsystem, VMI, represents those steps, techniques and algorithms that shall be applied to the collected data in order to improve the prediction capabilities for future design of re-entry vehicles and specifically to: Improve IXV flight dynamics model. Validate aerodynamic prediction methods based on Wind Tunnel Tests, WTT, and Computational Fluid Dynamics, CFD. Validate the vehicle model identification process and tools.

  5. Flight dynamics modeling of a small ducted fan aerial vehicle based on parameter identification

    Institute of Scientific and Technical Information of China (English)

    Wang Zhengjie; Liu Zhijun; Fan Ningjun; Guo Meifang

    2013-01-01

    This paper presents a simple and useful modeling method to acquire a dynamics model of an aerial vehicle containing unknown parameters using mechanism modeling, and then to design different identification experiments to identify the parameters based on the sources and features of its unknown parameters. Based on the mathematical model of the aerial vehicle acquired by modeling and identification, a design for the structural parameters of the attitude control system is carried out, and the results of the attitude control flaps are verified by simulation experiments and flight tests of the aerial vehicle. Results of the mathematical simulation and flight tests show that the mathematical model acquired using parameter identification is comparatively accurate and of clear mechanics, and can be used as the reference and basis for the structural design.

  6. Ground moving target geo-location from monocular camera mounted on a micro air vehicle

    Science.gov (United States)

    Guo, Li; Ang, Haisong; Zheng, Xiangming

    2011-08-01

    The usual approaches to unmanned air vehicle(UAV)-to-ground target geo-location impose some severe constraints to the system, such as stationary objects, accurate geo-reference terrain database, or ground plane assumption. Micro air vehicle(MAV) works with characteristics including low altitude flight, limited payload and onboard sensors' low accuracy. According to these characteristics, a method is developed to determine the location of ground moving target which imaged from the air using monocular camera equipped on MAV. This method eliminates the requirements for terrain database (elevation maps) and altimeters that can provide MAV's and target's altitude. Instead, the proposed method only requires MAV flight status provided by its inherent onboard navigation system which includes inertial measurement unit(IMU) and global position system(GPS). The key is to get accurate information on the altitude of the ground moving target. First, Optical flow method extracts background static feature points. Setting a local region around the target in the current image, The features which are on the same plane with the target in this region are extracted, and are retained as aided features. Then, inverse-velocity method calculates the location of these points by integrated with aircraft status. The altitude of object, which is calculated by using position information of these aided features, combining with aircraft status and image coordinates, geo-locate the target. Meanwhile, a framework with Bayesian estimator is employed to eliminate noise caused by camera, IMU and GPS. Firstly, an extended Kalman filter(EKF) provides a simultaneous localization and mapping solution for the estimation of aircraft states and aided features location which defines the moving target local environment. Secondly, an unscented transformation(UT) method determines the estimated mean and covariance of target location from aircraft states and aided features location, and then exports them for the

  7. Concussion in Motor Vehicle Accidents: The Concussion Identification Index

    Science.gov (United States)

    2016-08-03

    Motor Vehicle Accidents; TBI (Traumatic Brain Injury); Brain Contusion; Brain Injuries; Cortical Contusion; Concussion Mild; Cerebral Concussion; Brain Concussion; Accidents, Traffic; Traffic Accidents; Traumatic Brain Injury With Brief Loss of Consciousness; Traumatic Brain Injury With no Loss of Consciousness; Traumatic Brain Injury With Loss of Consciousness

  8. Theoretical and Experimental Aerodynamic Analysis for High-Speed Ground Vehicles

    Science.gov (United States)

    Farhan, Ismail Haider

    Available from UMI in association with The British Library. This thesis investigates the air flow around a proposed geometry for a high-speed electromagnetic suspension (EMS) train. A numerical technique called the panel method has been applied to the representation of the body shape and the prediction of the potential flow and pressure distribution. Two computer programmes have been written, one for a single vehicle in the presence of the ground at different yaw angles, and the second for two-body problems, e.g. a train passing a railway station or a train passing the central part of another train. Two methods based on the momentum integral equations for three-dimensional boundary layer flow have been developed for use with the potential flow analysis; these predict the development of the three-dimensional turbulent boundary layer on the central section (for the analysis of crosswind conditions) and on the nose of the train. Extensive wind tunnel tests were performed on four models of the high-speed train to measure aerodynamic forces, moments and pressures to establish ground effect characteristics. Flow visualisation showed that the wake vortices were stronger and larger in the presence of a ground. At small yaw angles ground clearance had little effect, but as yaw increased, larger ground clearance led to substantial increase in lift and side force coefficients. The tests also identified the differences between a moving and a fixed ground plane. Data showed that the type of ground simulation was significant only in the separated region. A comparison of the results predicted using potential flow theory for an EMS train model and the corresponding results from wind tunnel tests indicated good agreement in regions where the flow is attached. The turbulent boundary layer calculations for the train in a crosswind condition showed that the momentum thickness along the crosswind surface distance co-ordinate increased slowly at the beginning of the development of the

  9. Method and appartus for converting static in-ground vehicle scales into weigh-in-motion systems

    Energy Technology Data Exchange (ETDEWEB)

    Muhs, Jeffrey D. (Lenior City, TN); Scudiere, Matthew B. (Oak Ridge, TN); Jordan, John K. (Oak Ridge, TN)

    2002-01-01

    An apparatus and method for converting in-ground static weighing scales for vehicles to weigh-in-motion systems. The apparatus upon conversion includes the existing in-ground static scale, peripheral switches and an electronic module for automatic computation of the weight. By monitoring the velocity, tire position, axle spacing, and real time output from existing static scales as a vehicle drives over the scales, the system determines when an axle of a vehicle is on the scale at a given time, monitors the combined weight output from any given axle combination on the scale(s) at any given time, and from these measurements automatically computes the weight of each individual axle and gross vehicle weight by an integration, integration approximation, and/or signal averaging technique.

  10. Investigation into on-road vehicle parameter identification based on subspace methods

    Science.gov (United States)

    Dong, Guangming; Chen, Jin; Zhang, Nong

    2014-12-01

    The randomness of road-tyre excitations can excite the low frequency ride vibrations of bounce, pitch and roll modes of an on-road vehicle. In this paper, modal parameters and mass moments of inertia of an on-road vehicle are estimated with an acceptable accuracy only by measuring accelerations of vehicle sprung mass and unsprung masses, which is based on subspace identification methods. The vehicle bounce, pitch and roll modes are characterized by their large damping (damping ratio 0.2-0.3). Two kinds of subspace identification methods, one that uses input/output data and the other that uses output data only, are compared for the highly damped modes. It is shown that, when the same data length is given, larger error of modal identification results can be clearly observed for the method using output data only; while additional use of input data will significantly reduce estimation variance. Instead of using tyre forces as inputs, which are difficult to be measured or estimated, vertical accelerations of unsprung masses are used as inputs. Theoretical analysis and Monte Carlo experiments show that, when the vehicle speed is not very high, subspace identification method using accelerations of unsprung masses as inputs can give more accurate results compared with the method using road-tyre forces as inputs. After the modal parameters are identified, and if vehicle mass and its center of gravity are pre-determined, roll and pitch moments of inertia of an on-road vehicle can be directly computed using the identified frequencies only, without requiring accurate estimation of mode shape vectors and multi-variable optimization algorithms.

  11. Simulation of Ground Winds Time Series for the NASA Crew Launch Vehicle (CLV)

    Science.gov (United States)

    Adelfang, Stanley I.

    2008-01-01

    Simulation of wind time series based on power spectrum density (PSD) and spectral coherence models for ground wind turbulence is described. The wind models, originally developed for the Shuttle program, are based on wind measurements at the NASA 150-m meteorological tower at Cape Canaveral, FL. The current application is for the design and/or protection of the CLV from wind effects during on-pad exposure during periods from as long as days prior to launch, to seconds or minutes just prior to launch and seconds after launch. The evaluation of vehicle response to wind will influence the design and operation of constraint systems for support of the on-pad vehicle. Longitudinal and lateral wind component time series are simulated at critical vehicle locations. The PSD model for wind turbulence is a function of mean wind speed, elevation and temporal frequency. Integration of the PSD equation over a selected frequency range yields the variance of the time series to be simulated. The square root of the PSD defines a low-pass filter that is applied to adjust the components of the Fast Fourier Transform (FFT) of Gaussian white noise. The first simulated time series near the top of the launch vehicle is the inverse transform of the adjusted FFT. Simulation of the wind component time series at the nearest adjacent location (and all other succeeding next nearest locations) is based on a model for the coherence between winds at two locations as a function of frequency and separation distance, where the adjacent locations are separated vertically and/or horizontally. The coherence function is used to calculate a coherence weighted FFT of the wind at the next nearest location, given the FFT of the simulated time series at the previous location and the essentially incoherent FFT of the wind at the selected location derived a priori from the PSD model. The simulated time series at each adjacent location is the inverse Fourier transform of the coherence weighted FFT. For a selected

  12. Spectral analysis methods for vehicle interior vibro-acoustics identification

    Science.gov (United States)

    Hosseini Fouladi, Mohammad; Nor, Mohd. Jailani Mohd.; Ariffin, Ahmad Kamal

    2009-02-01

    Noise has various effects on comfort, performance and health of human. Sound are analysed by human brain based on the frequencies and amplitudes. In a dynamic system, transmission of sound and vibrations depend on frequency and direction of the input motion and characteristics of the output. It is imperative that automotive manufacturers invest a lot of effort and money to improve and enhance the vibro-acoustics performance of their products. The enhancement effort may be very difficult and time-consuming if one relies only on 'trial and error' method without prior knowledge about the sources itself. Complex noise inside a vehicle cabin originated from various sources and travel through many pathways. First stage of sound quality refinement is to find the source. It is vital for automotive engineers to identify the dominant noise sources such as engine noise, exhaust noise and noise due to vibration transmission inside of vehicle. The purpose of this paper is to find the vibro-acoustical sources of noise in a passenger vehicle compartment. The implementation of spectral analysis method is much faster than the 'trial and error' methods in which, parts should be separated to measure the transfer functions. Also by using spectral analysis method, signals can be recorded in real operational conditions which conduce to more consistent results. A multi-channel analyser is utilised to measure and record the vibro-acoustical signals. Computational algorithms are also employed to identify contribution of various sources towards the measured interior signal. These achievements can be utilised to detect, control and optimise interior noise performance of road transport vehicles.

  13. Modeling and identification of flexible joints in vehicle structures

    OpenAIRE

    Lee, Kwangju

    1991-01-01

    A simple, design-oriented model of joints in vehicle structures is developed. This model accounts for the flexibility, the offsets of rotation centers of joint branches, and the coupling between rotations of a joint branch in different planes. The model parameters consist of torsional spring rates, the coordinates of the flexible hinges, and the orientations of planes in which the torsional springs are located. The model parameters are selected to be physically meaningful. In s...

  14. Advances in ground vehicle-based LADAR for standoff detection of road-side hazards

    Science.gov (United States)

    Hollinger, Jim; Vessey, Alyssa; Close, Ryan; Middleton, Seth; Williams, Kathryn; Rupp, Ronald; Nguyen, Son

    2016-05-01

    Commercial sensor technology has the potential to bring cost-effective sensors to a number of U.S. Army applications. By using sensors built for a widespread of commercial application, such as the automotive market, the Army can decrease costs of future systems while increasing overall capabilities. Additional sensors operating in alternate and orthogonal modalities can also be leveraged to gain a broader spectrum measurement of the environment. Leveraging multiple phenomenologies can reduce false alarms and make detection algorithms more robust to varied concealment materials. In this paper, this approach is applied to the detection of roadside hazards partially concealed by light-to-medium vegetation. This paper will present advances in detection algorithms using a ground vehicle-based commercial LADAR system. The benefits of augmenting a LADAR with millimeter-wave automotive radar and results from relevant data sets are also discussed.

  15. Research of Obstacle Recognition Technology in Cross-Country Environment for Unmanned Ground Vehicle

    Directory of Open Access Journals (Sweden)

    Zhao Yibing

    2014-01-01

    Full Text Available Being aimed at the obstacle recognition problem of unmanned ground vehicles in cross-country environment, this paper uses monocular vision sensor to realize the obstacle recognition of typical obstacles. Firstly, median filtering algorithm is applied during image preprocessing that can eliminate the noise. Secondly, image segmentation method based on the Fisher criterion function is used to segment the region of interest. Then, morphological method is used to process the segmented image, which is preparing for the subsequent analysis. The next step is to extract the color feature S, color feature a and edge feature “verticality” of image are extracted based on the HSI color space, the Lab color space, and two value images. Finally multifeature fusion algorithm based on Bayes classification theory is used for obstacle recognition. Test results show that the algorithm has good robustness and accuracy.

  16. Unmanned Ground Vehicle Navigation Using Brain Emotional Learning Based Intelligent Controller (BELBIC

    Directory of Open Access Journals (Sweden)

    Alvaro Vargas-Clara

    2015-02-01

    Full Text Available In this paper, we implement a novel control strategy for navigation of an Unmanned Ground Vehicle (UGV. This strategy consisted in the development and implementation of the Brain Emotional Learning Based Intelligent Controller (BELBIC for heading, and path control of a UGV. BELBIC is an intelligent controller based on the model of the Amygdala-Orbitofrontal system of mammalians, which is a region in the brain known to be responsible for emotional learning process. Simulation of this controller for the cases of heading, and path control showed to be very robust and adaptable to dynamical changes in the plant. A comparison between BELBIC and a traditional PID control is presented to illustrate the performance of this control strategy.

  17. Results of the second (1996) experiment to lead cranes on migration behind a motorized ground vehicle

    Science.gov (United States)

    Ellis, D.H.; Clauss, B.; Watanabe, T.; Mykut, R.C.; Shawkey, M.; Mummert, D.P.; Sprague, D.T.; Ellis, Catherine H.; Trahan, F.B.

    2001-01-01

    Fourteen greater sandhill cranes (Grus canadensis tabida) were trained to follow a specially-equipped truck and 12 were led along a ca 620-km route from Camp Navajo in northern Arizona to the Buenos Aires National Wildlife Refuge near the Arizona/Mexico border. Ten survived the trek, 380 km of which were flown, although only a few cranes flew every stage of the route. Major problems during the migration were powerline collisions (ca 15, 2 fatal) and overheating (when air temperatures exceeded ca 25 C). The tenacity of the cranes in following both in 1995 and 1996 under unfavorable conditions (e.g., poor light, extreme dust, or heat) demonstrated that cranes could be led over long distances by motorized vehicles on the ground.

  18. Computational architecture for image processing on a small unmanned ground vehicle

    Science.gov (United States)

    Ho, Sean; Nguyen, Hung

    2010-08-01

    Man-portable Unmanned Ground Vehicles (UGVs) have been fielded on the battlefield with limited computing power. This limitation constrains their use primarily to teleoperation control mode for clearing areas and bomb defusing. In order to extend their capability to include the reconnaissance and surveillance missions of dismounted soldiers, a separate processing payload is desired. This paper presents a processing architecture and the design details on the payload module that enables the PackBot to perform sophisticated, real-time image processing algorithms using data collected from its onboard imaging sensors including LADAR, IMU, visible, IR, stereo, and the Ladybug spherical cameras. The entire payload is constructed from currently available Commercial off-the-shelf (COTS) components including an Intel multi-core CPU and a Nvidia GPU. The result of this work enables a small UGV to perform computationally expensive image processing tasks that once were only feasible on a large workstation.

  19. NASA Planning for Orion Multi-Purpose Crew Vehicle Ground Operations

    Science.gov (United States)

    Letchworth, Gary; Schlierf, Roland

    2011-01-01

    tools included Kaizen/Lean events, mockups and human factors analysis. The majority of products developed by this team are applicable as KSC prepares 21st Century Ground Systems for the Orion Multi-Purpose Crew Vehicle and Space Launch System.

  20. Phobetor: Princeton University's entry in the 2010 Intelligent Ground Vehicle Competition

    Science.gov (United States)

    Newman, Joshua; Zhu, Han; Partridge, Brenton A.; Szocs, Laszlo J.; Abiola, Solomon O.; Corey, Ryan M.; Suresh, Srinivasan A.; Yu, Derrick D.

    2011-01-01

    In this paper we present Phobetor, an autonomous outdoor vehicle originally designed for the 2010 Intelligent Ground Vehicle Competition (IGVC). We describe new vision and navigation systems that have yielded 3x increase in obstacle detection speed using parallel processing and robust lane detection results. Phobetor also uses probabilistic local mapping to learn about its environment and Anytime Dynamic A* (AD*) to plan paths to reach its goals. Our vision software is based on color stereo images and uses robust, RANSAC-based algorithms while running fast enough to support real-time autonomous navigation on uneven terrain. AD* allows Phobetor to respond quickly in all situations even when optimal planning takes more time, and uses incremental replanning to increase search efficiency. We augment the cost map of the environment with a potential field which addresses the problem of "wall-hugging" and smoothes generated paths to allow safe and reliable path-following. In summary, we present innovations on Phobetor that are relevant to real-world robotics platforms in uncertain environments.

  1. Novel identification strategy for ground coffee adulteration based on UPLC-HRMS oligosaccharide profiling.

    Science.gov (United States)

    Cai, Tie; Ting, Hu; Jin-Lan, Zhang

    2016-01-01

    Coffee is one of the most common and most valuable beverages. According to International Coffee Organization (ICO) reports, the adulteration of coffee for financial reasons is regarded as the most serious threat to the sustainable development of the coffee market. In this work, a novel strategy for adulteration identification in ground coffee was developed based on UPLC-HRMS oligosaccharide profiling. Along with integrated statistical analysis, 17 oligosaccharide composition were identified as markers for the identification of soybeans and rice in ground coffee. This strategy, validated by manual mixtures, optimized both the reliability and authority of adulteration identification. Rice and soybean adulterants present in ground coffee in amounts as low as 5% were identified and evaluated. Some commercial ground coffees were also successfully tested using this strategy.

  2. Wind Tunnel Investigation of Ground Wind Loads for Ares Launch Vehicle

    Science.gov (United States)

    Keller, Donald F.; Ivanco, Thomas G.

    2010-01-01

    A three year program was conducted at the NASA Langley Research Center (LaRC) Aeroelasticity Branch (AB) and Transonic Dynamics Tunnel (TDT) with the primary objective to acquire scaled steady and dynamic ground-wind loads (GWL) wind-tunnel data for rollout, on-pad stay, and on-pad launch configurations for the Ares I-X Flight Test Vehicle (FTV). The experimental effort was conducted to obtain an understanding of the coupling of aerodynamic and structural characteristics that can result in large sustained wind-induced oscillations (WIO) on such a tall and slender launch vehicle and to generate a unique database for development and evaluation of analytical methods for predicting steady and dynamic GWL, especially those caused by vortex shedding, and resulting in significant WIO. This paper summarizes the wind-tunnel test program that employed two dynamically-aeroelastically scaled GWL models based on the Ares I-X Flight Test Vehicle. The first model tested, the GWL Checkout Model (CM), was a relatively simple model with a secondary objective of restoration and development of processes and methods for design, fabrication, testing, and data analysis of a representative ground wind loads model. In addition, parametric variations in surface roughness, Reynolds number, and protuberances (on/off) were investigated to determine effects on GWL characteristics. The second windtunnel model, the Ares I-X GWL Model, was significantly more complex and representative of the Ares I-X FTV and included the addition of simplified rigid geometrically-scaled models of the Kennedy Space Center (KSC) Mobile Launch Platform (MLP) and Launch Complex 39B primary structures. Steady and dynamic base bending moment as well as model response and steady and unsteady pressure data was acquired during the testing of both models. During wind-tunnel testing of each model, flow conditions (speed and azimuth) where significant WIO occurred, were identified and thoroughly investigated. Scaled data from

  3. Identification of Naegleria fowleri in warm ground water aquifers.

    Science.gov (United States)

    Laseke, Ian; Korte, Jill; Lamendella, Regina; Kaneshiro, Edna S; Marciano-Cabral, Francine; Oerther, Daniel B

    2010-01-01

    The free-living amoeba Naegleria fowleri was identified as the etiological agent of primary amoebic meningoencephalitis that caused the deaths of two children in Peoria, Arizona, in autumn of 2002. It was suspected that the source of N. fowleri was the domestic water supply, which originates from ground water sources. In this study, ground water from the greater Phoenix Metropolitan area was tested for the presence of N. fowleri using a nested polymerase chain reaction approach. Phylogenetic analyses of 16S rRNA sequences of bacterial populations in the ground water were performed to examine the potential link between the presence of N. fowleri and bacterial groups inhabiting water wells. The results showed the presence of N. fowleri in five out of six wells sampled and in 26.6% of all ground water samples tested. Phylogenetic analyses showed that beta- and gamma-proteobacteria were the dominant bacterial populations present in the ground water. Bacterial community analyses revealed a very diverse community structure in ground water samples testing positive for N. fowleri.

  4. Identification of Potential Fishing Grounds Using Geospatial Technique

    Science.gov (United States)

    Abdullah, Muhammad

    2016-07-01

    Fishery resources surveys using actual sampling and data collection methods require extensive ship time and sampling time. Informative data from satellite plays a vital role in fisheries application. Satellite Remote Sensing techniques can be used to detect fish aggregation just like visual fish identification ultimately these techniques can be used to predict the potential fishing zones by measuring the parameters which affect the distribution of fishes. Remote sensing is a time saving technique to locate fishery resources along the coast. Pakistan has a continental shelf area of 50,270 km2 and coastline length of 1,120 km. The total maritime zone of Pakistan is over 30 percent of the land area. Fishery plays an important role in the national economy. The marine fisheries sector is the main component, contributing about 57 percent in terms of production. Fishery is the most important economic activity in the villages and towns along the coast, and in most of the coastal villages and settlements it is the sole source of employment and income generation. Fishing by fishermen is done on the sole basis of repeated experiments and collection of information from other fishermen. Often they are in doubt about the location of potential fishing zones. This leads to waste of time and money, adversely affecting fishermen incomes and over or under-exploitation of fishing zones. The main purpose of this study was to map potential fishing grounds by identifying various environmental parameters which impact fish aggregation along the Pakistan coastline. The primary reason of this study is the fact that the fishing communities of Pakistan's coastal regions are extremely poor and lack knowledge of the modern tools and techniques that may be incorporated to enhance their yield and thus, improve their livelihood. Using geospatial techniques in order to accurately map the potential fishing zones based on sea surface temperature (SST) and chlorophyll -a content, in conjunction with

  5. The Role of Model Fidelity in Model Predictive Control Based Hazard Avoidance in Unmanned Ground Vehicles Using Lidar Sensors

    Science.gov (United States)

    2013-03-08

    for Mobile Robot Obstacle Avoidance", Proceedings of IEEE International Conference on Mechatronics and Automation, Harbin, China, pp. 2784-2788. [10...military and commercial applications. Although earlier UGV platforms were typically exclusively small ground robots , recent efforts started...targeting passenger vehicle and larger size platforms. Due to their size and speed, these platforms have significantly different dynamics than small robots

  6. A Multidisciplinary Optimization Framework for Occupant Centric Ground Vehicle System Design. Part 1: Vehicle Design Parameter Screening Study

    Science.gov (United States)

    2014-08-01

    measured, such as at the pelvis location. Tibia vertical forces and lower lumbar spine forces were also measured and used as the responses to an...are four pillars mounted to the roof and the crew floor along the center line of the crew cabin to increase the vertical stiffness of the cabin...components of the simplified vehicle structure used for this study, including seat mounting options, and vehicle interior arrangements . In this study

  7. Analysis of the Effects of Vitiates on Surface Heat Flux in Ground Tests of Hypersonic Vehicles

    Science.gov (United States)

    Cuda, Vincent; Gaffney, Richard L

    2008-01-01

    To achieve the high enthalpy conditions associated with hypersonic flight, many ground test facilities burn fuel in the air upstream of the test chamber. Unfortunately, the products of combustion contaminate the test gas and alter gas properties and the heat fluxes associated with aerodynamic heating. The difference in the heating rates between clean air and a vitiated test medium needs to be understood so that the thermal management system for hypersonic vehicles can be properly designed. This is particularly important for advanced hypersonic vehicle concepts powered by air-breathing propulsion systems that couple cooling requirements, fuel flow rates, and combustor performance by flowing fuel through sub-surface cooling passages to cool engine components and preheat the fuel prior to combustion. An analytical investigation was performed comparing clean air to a gas vitiated with methane/oxygen combustion products to determine if variations in gas properties contributed to changes in predicted heat flux. This investigation started with simple relationships, evolved into writing an engineering-level code, and ended with running a series of CFD cases. It was noted that it is not possible to simultaneously match all of the gas properties between clean and vitiated test gases. A study was then conducted selecting various combinations of freestream properties for a vitiated test gas that matched clean air values to determine which combination of parameters affected the computed heat transfer the least. The best combination of properties to match was the free-stream total sensible enthalpy, dynamic pressure, and either the velocity or Mach number. This combination yielded only a 2% difference in heating. Other combinations showed departures of up to 10% in the heat flux estimate.

  8. A novel lidar-driven two-level approach for real-time unmanned ground vehicle navigation and map building

    Science.gov (United States)

    Luo, Chaomin; Krishnan, Mohan; Paulik, Mark; Cui, Bo; Zhang, Xingzhong

    2013-12-01

    In this paper, a two-level LIDAR-driven hybrid approach is proposed for real-time unmanned ground vehicle navigation and map building. Top level is newly designed enhanced Voronoi Diagram (EVD) method to plan a global trajectory for an unmanned vehicle. Bottom level employs Vector Field Histogram (VFH) algorithm based on the LIDAR sensor information to locally guide the vehicle under complicated workspace, in which it autonomously traverses from one node to another within the planned EDV with obstacle avoidance. To find the least-cost path within the EDV, novel distance and angle based search heuristic algorithms are developed, in which the cost of an edge is the risk of traversing the edge. An EVD is first constructed based on the environment, which is utilized to generate the initial global trajectory with obstacle avoidance. The VFH algorithm is employed to guide the vehicle to follow the path locally. Its effectiveness and efficiency of real-time navigation and map building for unmanned vehicles have been successfully validated by simulation studies and experiments. The proposed approach is successfully experimented on an actual unmanned vehicle to demonstrate the real-time navigation and map building performance of the proposed method. The vehicle appears to follow a very stable path while navigating through various obstacles.

  9. PARAMETRIC IDENTIFICATION AND SENSITIVITY ANALYSIS FOR AUTONOMOUS UNDERWATER VEHICLES IN DIVING PLANE

    Institute of Scientific and Technical Information of China (English)

    XU Feng; ZOU Zao-jian; YIN Jian-chuan; CAO Jian

    2012-01-01

    The inherent strongly nonlinear and coupling performance of the Autonomous Underwater Vehicles (AUV),maneuvering motion in the diving plane determines its difficulty in parametric identification.The motion parameters in diving plane are obtained by executing the Zigzag-like motion based on a mathematical model of maneuvering motion.A separate identification method is put forward for parametric identification by investigating the motion equations.Support vector machine is proposed to estimate the hydrodynamic derivatives by analyzing the data of surge,heave and pitch motions.Compared with the standard coefficients,the identified parameters show the validation of the proposed identification method.Sensitivity analysis based on numerical simulation demonstrates that poor sensitive derivative gives bad estimation results.Finally the motion simulation is implemented based on the dominant sensitive derivatives to verify the reconstructed model.

  10. Development of a vehicle capable of traveling on soft ground. Its application to investigation, survey and management of soft ground; Nanjakuchi sokosha no kaihatsu. Nanjakuchi deno chosa sokuryo kanri eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, R.; Yano, H. [Ministry of Construction, Tokyo (Japan)

    1998-07-25

    An experimental vehicle is built and tested, which utilizes hovercraft technology, capable of travelling on a soft ground surface and therefore usable in reclamation work. When the ground is soft and viscous, merely increasing the vehicle driving force will futilely add to the vehicle weight, and this causes an adverse effect with the vehicle sinking deeper into the ground and the ground presenting higher resistance. In an effort to decrease the weight and resistance, a vehicle is built, capable of levitating itself by use of hovercraft technology and provided with retractable tracks and wheels for travelling. The targets are mostly attained in the test run, as far as speeds (5.5km/h at the maximum across a muddy ground section) and trekking across ground including an undulated surface are concerned, although the levitation level is found to be somewhat lower than the design value. Operating across a hard ground surface with the body elevated, the vehicle exhibits a higher performance in speed and drivability when the hovercraft effect is utilized. When travelling on the hovercraft effect, the frictional resistance of the skirt decreases as the vehicle moves from a hard surface section into a soft surface section, and this allows the vehicle to run more smoothly at higher speeds. 1 refs., 6 figs.

  11. A framework for the natural-language-perception-based creative control of unmanned ground vehicles

    Science.gov (United States)

    Ghaffari, Masoud; Liao, Xiaoqun; Hall, Ernest L.

    2004-09-01

    Mobile robots must often operate in an unstructured environment cluttered with obstacles and with many possible action paths. That is why mobile robotics problems are complex with many unanswered questions. To reach a high degree of autonomous operation, a new level of learning is required. On the one hand, promising learning theories such as the adaptive critic and creative control have been proposed, while on other hand the human brain"s processing ability has amazed and inspired researchers in the area of Unmanned Ground Vehicles but has been difficult to emulate in practice. A new direction in the fuzzy theory tries to develop a theory to deal with the perceptions conveyed by the natural language. This paper tries to combine these two fields and present a framework for autonomous robot navigation. The proposed creative controller like the adaptive critic controller has information stored in a dynamic database (DB), plus a dynamic task control center (TCC) that functions as a command center to decompose tasks into sub-tasks with different dynamic models and multi-criteria functions. The TCC module utilizes computational theory of perceptions to deal with the high levels of task planning. The authors are currently trying to implement the model on a real mobile robot and the preliminary results have been described in this paper.

  12. Suborbital Reusable Launch Vehicles as an Opportunity to Consolidate and Calibrate Ground Based and Satellite Instruments

    Science.gov (United States)

    Papadopoulos, K.

    2014-12-01

    XCOR Aerospace, a commercial space company, is planning to provide frequent, low cost access to near-Earth space on the Lynx suborbital Reusable Launch Vehicle (sRLV). Measurements in the external vacuum environment can be made and can launch from most runways on a limited lead time. Lynx can operate as a platform to perform suborbital in situ measurements and remote sensing to supplement models and simulations with new data points. These measurements can serve as a quantitative link to existing instruments and be used as a basis to calibrate detectors on spacecraft. Easier access to suborbital data can improve the longevity and cohesiveness of spacecraft and ground-based resources. A study of how these measurements can be made on Lynx sRLV will be presented. At the boundary between terrestrial and space weather, measurements from instruments on Lynx can help develop algorithms to optimize the consolidation of ground and satellite based data as well as assimilate global models with new data points. For example, current tides and the equatorial electrojet, essential to understanding the Thermosphere-Ionosphere system, can be measured in situ frequently and on short notice. Furthermore, a negative-ion spectrometer and a Faraday cup, can take measurements of the D-region ion composition. A differential GPS receiver can infer the spatial gradient of ionospheric electron density. Instruments and optics on spacecraft degrade over time, leading to calibration drift. Lynx can be a cost effective platform for deploying a reference instrument to calibrate satellites with a frequent and fast turnaround and a successful return of the instrument. A calibrated reference instrument on Lynx can make collocated observations as another instrument and corrections are made for the latter, thus ensuring data consistency and mission longevity. Aboard a sRLV, atmospheric conditions that distort remotely sensed data (ground and spacecraft based) can be measured in situ. Moreover, an

  13. A Wireless Framework for Lecturers' Attendance System with Automatic Vehicle Identification (AVI Technology

    Directory of Open Access Journals (Sweden)

    Emammer Khamis Shafter

    2015-10-01

    Full Text Available Automatic Vehicle Identification (AVI technology is one type of Radio Frequency Identification (RFID method which can be used to significantly improve the efficiency of lecturers' attendance system. It provides the capability of automatic data capture for attendance records using mobile device equipped in users’ vehicle. The intent of this article is to propose a framework for automatic lecturers' attendance system using AVI technology. The first objective of this work involves gathering of requirements for Automatic Lecturers' Attendance System and to represent them using UML diagrams. The second objective is to put forward a framework that will provide guidelines for developing the system. A prototype has also been created as a pilot project.

  14. Parameter identification of multi-body railway vehicle models - Application of the adjoint state approach

    Science.gov (United States)

    Kraft, S.; Puel, G.; Aubry, D.; Funfschilling, C.

    2016-12-01

    For the calibration of multi-body models of railway vehicles, the identification of the model parameters from on-track measurement is required. This involves the solution of an inverse problem by minimising the misfit function which describes the distance between model and measurement using optimisation methods. The application of gradient-based optimisation methods is advantageous but necessitates an efficient approach for the computation of the gradients considering the large number of model parameters and the costly evaluation of the forward model. This work shows that the application of the adjoint state approach to the nonlinear vehicle-track multi-body system is suitable, reducing on the one hand the computational cost and increasing on the other hand the precision of the gradients. Gradients from the adjoint state method are computed for vehicle models and validated taking into account measurement noise.

  15. Design of an Integrated Vehicle Chassis Control System with Driver Behavior Identification

    OpenAIRE

    Bing Zhu; Yizhou Chen; Jian Zhao; Yunfu Su

    2015-01-01

    An integrated vehicle chassis control strategy with driver behavior identification is introduced in this paper. In order to identify the different types of driver behavior characteristics, a driver behavior signals acquisition system was established using the dSPACE real-time simulation platform, and the driver inputs of 30 test drivers were collected under the double lane change test condition. Then, driver behavior characteristics were analyzed and identified based on the preview optimal cu...

  16. Absolute High-Precision Localisation of an Unmanned Ground Vehicle by Using Real-Time Aerial Video Imagery for Geo-referenced Orthophoto Registration

    Science.gov (United States)

    Kuhnert, Lars; Ax, Markus; Langer, Matthias; Nguyen van, Duong; Kuhnert, Klaus-Dieter

    This paper describes an absolute localisation method for an unmanned ground vehicle (UGV) if GPS is unavailable for the vehicle. The basic idea is to combine an unmanned aerial vehicle (UAV) to the ground vehicle and use it as an external sensor platform to achieve an absolute localisation of the robotic team. Beside the discussion of the rather naive method directly using the GPS position of the aerial robot to deduce the ground robot's position the main focus of this paper lies on the indirect usage of the telemetry data of the aerial robot combined with live video images of an onboard camera to realise a registration of local video images with apriori registered orthophotos. This yields to a precise driftless absolute localisation of the unmanned ground vehicle. Experiments with our robotic team (AMOR and PSYCHE) successfully verify this approach.

  17. 77 FR 13385 - Identification of Interstate Motor Vehicles: New York City, Cook County, and New Jersey Tax...

    Science.gov (United States)

    2012-03-06

    ... Federal Motor Carrier Safety Administration Identification of Interstate Motor Vehicles: New York City... reconsideration. SUMMARY: The FMCSA grants a petition for reconsideration submitted by the New York City... credential display requirement of New York City's Commercial Motor Vehicle Tax (CMV Tax) is preempted...

  18. Identification of Fungal Colonies on Ground Control and Flight Veggie Plant Pillows

    Science.gov (United States)

    Scotten, Jessica E.; Hummerick, Mary E.; Khodadad, Christina L.; Spencer, Lashelle E.; Massa, Gioia D.

    2017-01-01

    The Veggie system focuses on growing fresh produce that can be harvested and consumed by astronauts. The microbial colonies in each Veggie experiment are evaluated to determine the safety level of the produce and then differences between flight and ground samples. The identifications of the microbial species can detail risks or benefits to astronaut and plant health. Each Veggie ground or flight experiment includes six plants grown from seeds that are glued into wicks in Teflon pillows filled with clay arcillite and fertilizer. Fungal colonies were isolated from seed wicks, growth media, and lettuce (cv. 'Outredgeous') roots grown in VEG-01B pillows on ISS and in corresponding ground control pillows grown in controlled growth chambers. The colonies were sorted by morphology and identified using MicroSeq(TM) 500 16s rDNA Bacterial Identification System and BIOLOG GEN III MicroPlate(TM). Health risks for each fungal identification were then assessed using literature sources. The goal was to identify all the colonies isolated from flight and ground control VEG-01B plants, roots, and rooting medium and compare the resulting identifications.

  19. Real-time Accurate Surface Reconstruction Pipeline for Vision Guided Planetary Exploration Using Unmanned Ground and Aerial Vehicles

    Science.gov (United States)

    Almeida, Eduardo DeBrito

    2012-01-01

    This report discusses work completed over the summer at the Jet Propulsion Laboratory (JPL), California Institute of Technology. A system is presented to guide ground or aerial unmanned robots using computer vision. The system performs accurate camera calibration, camera pose refinement and surface extraction from images collected by a camera mounted on the vehicle. The application motivating the research is planetary exploration and the vehicles are typically rovers or unmanned aerial vehicles. The information extracted from imagery is used primarily for navigation, as robot location is the same as the camera location and the surfaces represent the terrain that rovers traverse. The processed information must be very accurate and acquired very fast in order to be useful in practice. The main challenge being addressed by this project is to achieve high estimation accuracy and high computation speed simultaneously, a difficult task due to many technical reasons.

  20. Vehicle-mounted ground penetrating radar (Mine Stalker III) field evaluation in Angola

    Science.gov (United States)

    Laudato, Stephen; Hart, Kerry; Nevard, Michael; Lauziere, Steven; Grant, Shaun

    2014-05-01

    The U.S. Department of Defense Humanitarian Demining Research and Development (HD R&D) Program, Non-Intrusive Inspection Technology (NIITEK), Inc. and The HALO Trust have over the last decade funded, developed and tested various prototype vehicle mounted ground penetrating radar (GPR) systems named the Mine Stalker. The HD R&D Program and NIITEK developed the Mine Stalker to detect low metal anti-tank (LM-AT) mines in roads. The country of Angola is severely affected by LM-AT mines in and off road, some of which are buried beyond the effective range of detection sensors current used in country. The threat from LM-AT mines such as the South African Number 8 (No. 8) and the Chinese Type 72 (72AT) still persist from Angola's 30 years of civil war. These LM-AT threats are undetectable at depths greater than 5 to 10 centimeters using metal detection technology. Clearing commerce routes are a critical requirement before Angola can rebuild its infrastructure and improve safety conditions for the local populace. The Halo Trust, a non-governmental demining organization (NGO) focused on demining and clearance of unexploded ordnance (UXO), has partnered with the HD R&D Program to conduct an operational field evaluation (OFE) of the Mine Stalker III (MS3) in Angola. Preliminary testing and training efforts yielded encouraging results. This paper presents a review of the data collected, testing results, system limitations and deficiencies while operating in a real world environment. Our goal is to demonstrate and validate this technology in live minefield environments, and to collect data to prompt future developments to the system.

  1. Robust Stability and Control of Multi-Body Ground Vehicles with Uncertain Dynamics and Failures

    Science.gov (United States)

    2010-01-01

    Modeling for Heavy Articulated Tractor Semi- Trailer Vehicle 2.2.3.1 Rollover Index (RI) for A single Unit Vehicle 2.2.3.2...increasing complexity to capture Roll Over phenomenon and Other Performance and Ride Quality requirements. In this connection, first simple ` Bicycle ...methodology to a specific heavy articulated vehicle with tractor semi- trailer shows that a single active anti-roll bar system at the trailer unit gives

  2. Experimental analysis of vehicle-bridge interaction using a wireless monitoring system and a two-stage system identification technique

    Science.gov (United States)

    Kim, Junhee; Lynch, Jerome P.

    2012-04-01

    Deterioration of bridges under repeated traffic loading has called attention to the need for improvements in the understanding of vehicle-bridge interaction. While analytical and numerical models have been previously explored to describe the interaction that exists between a sprung mass (i.e., a moving vehicle) and an elastic beam (i.e., bridge), comparatively less research has been focused on the experimental observation of vehicle-bridge interaction. A wireless monitoring system with wireless sensors installed on both the bridge and moving vehicle is proposed to record the dynamic interaction between the bridge and vehicle. Time-synchronized vehicle-bridge response data is used within a two-stage system identification methodology. In the first stage, the free-vibration response of the bridge is used to identify the dynamic characteristics of the bridge. In the second stage, the vehicle-bridge response data is used to identify the time varying load imposed on the bridge from the vehicle. To test the proposed monitoring and system identification strategy, the 180 m long Yeondae Bridge (Icheon, Korea) was selected. A dense network of wireless sensors was installed on the bridge while wireless sensors were installed on a multi-axle truck. The truck was driven across the bridge at constant velocity with bridge and vehicle responses measured. Excellent agreement between the measured Yeondae Bridge response and that predicted by an estimated vehicle-bridge interaction model validates the proposed strategy.

  3. A study on model fidelity for model predictive control-based obstacle avoidance in high-speed autonomous ground vehicles

    Science.gov (United States)

    Liu, Jiechao; Jayakumar, Paramsothy; Stein, Jeffrey L.; Ersal, Tulga

    2016-11-01

    This paper investigates the level of model fidelity needed in order for a model predictive control (MPC)-based obstacle avoidance algorithm to be able to safely and quickly avoid obstacles even when the vehicle is close to its dynamic limits. The context of this work is large autonomous ground vehicles that manoeuvre at high speed within unknown, unstructured, flat environments and have significant vehicle dynamics-related constraints. Five different representations of vehicle dynamics models are considered: four variations of the two degrees-of-freedom (DoF) representation as lower fidelity models and a fourteen DoF representation with combined-slip Magic Formula tyre model as a higher fidelity model. It is concluded that the two DoF representation that accounts for tyre nonlinearities and longitudinal load transfer is necessary for the MPC-based obstacle avoidance algorithm in order to operate the vehicle at its limits within an environment that includes large obstacles. For less challenging environments, however, the two DoF representation with linear tyre model and constant axle loads is sufficient.

  4. An adaptive finite element method for computing emergency manoeuvres of ground vehicles in complex driving scenarios

    NARCIS (Netherlands)

    Kanarachos, S.; Alirezaei, M.

    2015-01-01

    In emergency cases a vehicle has to avoid colliding with one or more obstacles, stay within road boundaries, satisfy acceleration and jerk limits, fulfil stability requirements and respect vehicle system dynamics limitations. The real time solution of such a problem is difficult and as a result vari

  5. Physical parameter identification method based on modal analysis for two-axis on-road vehicles: Theory and simulation

    Science.gov (United States)

    Zheng, Minyi; Zhang, Bangji; Zhang, Jie; Zhang, Nong

    2016-07-01

    Physical parameters are very important for vehicle dynamic modeling and analysis. However, most of physical parameter identification methods are assuming some physical parameters of vehicle are known, and the other unknown parameters can be identified. In order to identify physical parameters of vehicle in the case that all physical parameters are unknown, a methodology based on the State Variable Method(SVM) for physical parameter identification of two-axis on-road vehicle is presented. The modal parameters of the vehicle are identified by the SVM, furthermore, the physical parameters of the vehicle are estimated by least squares method. In numerical simulations, physical parameters of Ford Granada are chosen as parameters of vehicle model, and half-sine bump function is chosen to simulate tire stimulated by impulse excitation. The first numerical simulation shows that the present method can identify all of the physical parameters and the largest absolute value of percentage error of the identified physical parameter is 0.205%; and the effect of the errors of additional mass, structural parameter and measurement noise are discussed in the following simulations, the results shows that when signal contains 30 dB noise, the largest absolute value of percentage error of the identification is 3.78%. These simulations verify that the presented method is effective and accurate for physical parameter identification of two-axis on-road vehicles. The proposed methodology can identify all physical parameters of 7-DOF vehicle model by using free-decay responses of vehicle without need to assume some physical parameters are known.

  6. Navigation of military and space unmanned ground vehicles in unstructured terrains

    Science.gov (United States)

    Lescoe, Paul; Lavery, David; Bedard, Roger

    1991-01-01

    Development of unmanned vehicles for local navigation in terrains unstructured by humans is reviewed. Modes of navigation include teleoperation or remote control, computer assisted remote driving (CARD), and semiautonomous navigation (SAN). A first implementation of a CARD system was successfully tested using the Robotic Technology Test Vehicle developed by Jet Propulsion Laboratory. Stereo pictures were transmitted to a remotely located human operator, who performed the sensing, perception, and planning functions of navigation. A computer provided range and angle measurements and the path plan was transmitted to the vehicle which autonomously executed the path. This implementation is to be enhanced by providing passive stereo vision and a reflex control system for autonomously stopping the vehicle if blocked by an obstacle. SAN achievements include implementation of a navigation testbed on a six wheel, three-body articulated rover vehicle, development of SAN algorithms and code, integration of SAN software onto the vehicle, and a successful feasibility demonstration that represents a step forward towards the technology required for long-range exploration of the lunar or Martian surface. The vehicle includes a passive stereo vision system with real-time area-based stereo image correlation, a terrain matcher, a path planner, and a path execution planner.

  7. Demonstration of Biodiesel in Non-deployed Ground Tactical Vehicles/Equipment

    Science.gov (United States)

    2010-06-01

    tactical vehicles in their March 2006 Position Statement – Stability of the biodiesel – Accelerated deterioration in high temperature environments...Concerns – Stability of the biodiesel – All sites – Accelerated deterioration in high temperature environments – Moody AFB (hot/humid) and MCAGCC 29... Palms (hot/dry) – Vehicle operation and fuel properties in low temperatures – NSWC Crane – Water affinity and microbial degradation – All sites

  8. A Conformal, Fully-Conservative Approach for Predicting Blast Effects on Ground Vehicles

    Science.gov (United States)

    2014-02-09

    and hull. The decoupled inviscid CFD simulations (i.e. assuming a rigid vehicle) were used to examine the pressure variation and shock wave...interaction with the vehicle. Silver [8] used a commercial CFD code to predict the overpressure of a large caliber gun mounted on a simplified, rigid tank ...different locations under the crew cab and wheels. The pressures were calculated using the inviscid AUGUST-3D CFD code. The assessment of the structural

  9. Longitudinal parameter identification of a small unmanned aerial vehicle based on modified particle swarm optimization

    Directory of Open Access Journals (Sweden)

    Jiang Tieying

    2015-06-01

    Full Text Available This paper describes a longitudinal parameter identification procedure for a small unmanned aerial vehicle (UAV through modified particle swam optimization (PSO. The procedure is demonstrated using a small UAV equipped with only an micro-electro-mechanical systems (MEMS inertial measuring element and a global positioning system (GPS receiver to provide test information. A small UAV longitudinal parameter mathematical model is derived and the modified method is proposed based on PSO with selective particle regeneration (SRPSO. Once modified PSO is applied to the mathematical model, the simulation results show that the mathematical model is correct, and aerodynamic parameters and coefficients of the propeller can be identified accurately. Results are compared with those of PSO and SRPSO and the comparison shows that the proposed method is more robust and faster than the other methods for the longitudinal parameter identification of the small UAV. Some parameter identification results are affected slightly by noise, but the identification results are very good overall. Eventually, experimental validation is employed to test the proposed method, which demonstrates the usefulness of this method.

  10. Instrumented borehole drilling for interface identification in intricate weathered granite ground engineering

    Institute of Scientific and Technical Information of China (English)

    Zhuoying Tan; Meifeng Cai; Z.Q. Yue; L.G.Tham; C.F.Lee

    2007-01-01

    The successful application in drilling for HK simple weathered granite foundation has revealed its further use in instrumented drilling system as a ground investigation tool in the detection of other lithology formations, geohazards, underground water, and boundary of orebody. To expand the further use and test the accuracy in identification of formation, an R-20 rotary-hydraulic drill rig was instrumented with a digital drilling process monitoring system (DPM) for drilling in an intricate decomposed granite site.In this test ground, the boreholes revealed that the weathered granite alternately changes between moderate and strong. The qualitative and quantitative analysis of the penetrating parameters, indicates the effective thrust force, rotary speed, flushing pressure, penetrating rate, and displacement of the bit fluctuate at ground interfaces. It shows that the parameters get a good response with the change of rock strength at the interfaces, which can reveal the change of the intricate granite formation. Besides, a variable-slope method has been established, for identification of dominative and subsidiary interfaces in the granite site. The result from a t-test shows that the confidence of the instrumented drilling system in identification of the geotechnical interfaces is up to 99%.

  11. Electric Vehicle Preparedness: Task 2, Identification of Vehicles for Installation of Data Loggers for Marine Corps Base Camp Lejeune

    Energy Technology Data Exchange (ETDEWEB)

    Schey, Stephen [Idaho National Lab. (INL), Idaho Falls, ID (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-02-01

    In Task 1, a survey was completed of the inventory of non-tactical fleet vehicles at the Marine Corps Base Camp Lejeune (MCBCL) to characterize the fleet. This information and characterization was used to select vehicles for further monitoring, which involves data logging of vehicle movements in order to identify the vehicle’s mission and travel requirements. Individual observations of these selected vehicles provide the basis for recommendations related to PEV adoption. It also identifies whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively referred to as PEVs) can fulfill the mission requirements and provides observations related to placement of PEV charging infrastructure. This report provides the list of vehicles selected by MCBCL and Intertek for further monitoring and fulfills the Task 2 requirements.

  12. Study of Model Predictive Control for Path-Following Autonomous Ground Vehicle Control under Crosswind Effect

    Directory of Open Access Journals (Sweden)

    Fitri Yakub

    2016-01-01

    Full Text Available We present a comparative study of model predictive control approaches of two-wheel steering, four-wheel steering, and a combination of two-wheel steering with direct yaw moment control manoeuvres for path-following control in autonomous car vehicle dynamics systems. Single-track mode, based on a linearized vehicle and tire model, is used. Based on a given trajectory, we drove the vehicle at low and high forward speeds and on low and high road friction surfaces for a double-lane change scenario in order to follow the desired trajectory as close as possible while rejecting the effects of wind gusts. We compared the controller based on both simple and complex bicycle models without and with the roll vehicle dynamics for different types of model predictive control manoeuvres. The simulation result showed that the model predictive control gave a better performance in terms of robustness for both forward speeds and road surface variation in autonomous path-following control. It also demonstrated that model predictive control is useful to maintain vehicle stability along the desired path and has an ability to eliminate the crosswind effect.

  13. A Nonlinear Model Predictive Control Algorithm for Obstacle Avoidance in Autonomous Ground Vehicles within Unknown Environments

    Science.gov (United States)

    2015-04-24

    Allgwer and A. Zheng, Nonlinear model predictive control vol. 26: Springer , 2000. [10] J. M. Park, D. W. Kim, Y. S. Yoon, H. J. Kim, and K. S. Yi...include modeling, simulation, and control of dynamic systems, with applications to energy systems, multibody dynamics, vehicle systems, and biomechanics

  14. The In-Transit Vigilant Covering Tour Problem of Routing Unmanned Ground Vehicles

    Science.gov (United States)

    2012-08-01

    15 Figure 2. A classic VRP ...17 Figure 3. Solution for a VRP ........................................................................................18 Figure 4. Solution...of NP-hard problems, such as the Traveling Salesman Problem (TSP), Vehicle Routing Problem ( VRP ), and Covering Salesman Problem (CSP) etc. We will

  15. IDENTIFICATION OF SOME CARCINOGENIC POLYCYCLIC AROMATIC HYDROCARBONS IN BANGLADESHI VEHICLES EXHAUST TAR BY GAS CHROMATOGRAPHY-MASS SPECTROPHOTOMETER

    Directory of Open Access Journals (Sweden)

    M. Amzad Hossain

    2010-06-01

    Full Text Available A more sensitive GC-MS method has been established for the determination of some carcinogenic polycyclic aromatic hydrocarbons (PAHs in vehicles exhaust tar samples. The tar samples were extracted using dichloromethane (DMC: n-hexane solvent mixture. A multi-layer clean-up (silica gel/sodium sulphate column was used, followed by glass fiber filter (GFF paper. The method was successfully applied to determine a number of PAHs present in exhaust tar sample of different vehicles of the Atomic Energy Centre, Dhaka, Bangladesh.   Keywords: Carcinogenic polycyclic aromatic hydrocarbons, vehicles tar samples, identification, GC-MS/MS

  16. Pheromone-based coordination strategy to static sensors on the ground and unmanned aerial vehicles carried sensors

    Science.gov (United States)

    Pignaton de Freitas, Edison; Heimfarth, Tales; Pereira, Carlos Eduardo; Morado Ferreira, Armando; Rech Wagner, Flávio; Larsson, Tony

    2010-04-01

    A current trend that is gaining strength in the wireless sensor network area is the use of heterogeneous sensor nodes in one coordinated overall network, needed to fulfill the requirements of sophisticated emerging applications, such as area surveillance systems. One of the main concerns when developing such sensor networks is how to provide coordination among the heterogeneous nodes, in order to enable them to efficiently respond the user needs. This study presents an investigation of strategies to coordinate a set of static sensor nodes on the ground cooperating with wirelessly connected Unmanned Aerial Vehicles (UAVs) carrying a variety of sensors, in order to provide efficient surveillance over an area of interest. The sensor nodes on the ground are set to issue alarms on the occurrence of a given event of interest, e.g. entrance of a non-authorized vehicle in the area, while the UAVs receive the issued alarms and have to decide which of them is the most suitable to handle the issued alarm. A bio-inspired coordination strategy based on the concept of pheromones is presented. As a complement of this strategy, a utility-based decision making approach is proposed.

  17. Standards and Specifications for Ground Processing of Space Vehicles: From an Aviation-Based Shuttle Project to Global Application

    Science.gov (United States)

    Ingalls, John; Cipolletti, John

    2011-01-01

    Proprietary or unique designs and operations are expected early in any industry's development, and often provide a competitive early market advantage. However, there comes a time when a product or industry requires standardization for the whole industry to advance...or survive. For the space industry, that time has come. Here, we will focus on standardization of ground processing for space vehicles and their ground systems. With the retirement of the Space Shuttle, and emergence of a new global space race, affordability and sustainability are more important now than ever. The growing commercialization of the space industry and current global economic environment are driving greater need for efficiencies to save time and money. More RLV's (Reusable Launch Vehicles) are being developed for the gains of reusability not achievable with traditional ELV's (Expendable Launch Vehicles). More crew/passenger vehicles are also being developed. All of this calls for more attention needed for ground processing-repeatedly before launch and after landing/recovery. RLV's should provide more efficiencies than ELV's, as long as MRO (Maintenance, Repair, and Overhaul) is well-planned-even for the unplanned problems. NASA's Space Shuttle is a primary example of an RLV which was supposed to thrive on reusability savings with efficient ground operations, but lessons learned show that costs were (and still are) much greater than expected. International standards and specifications can provide the commonality needed to simplify design and manufacturing as well as to improve safety, quality, maintenance, and operability. There are standards organizations engaged in the space industry, but ground processing is one of the areas least addressed. Challenges are encountered due to various factors often not considered during development. Multiple vehicle elements, sites, customers, and contractors pose various functional and integration difficulties. Resulting technical publication structures

  18. A Conformal, Fully-Conservative Approach for Predicting Blast Effects on Ground Vehicles

    Science.gov (United States)

    2014-04-01

    time integration  Approximate Riemann Fluxes (HLLE, HLLC) ◦ Robust mixture model for multi-material flows  Multiple Equations of State ◦ Perfect Gas...Generic Hull geometry used to verify coupling for realistic configurations ◦ Qualitative results only UNCLASSIFIED UNCLASSIFIED  Large weight used to...UNCLASSIFIED UNCLASSIFIED UNCLASSIFIED  Geometry represents a notional Army vehicle  Test conditions: ◦ Charge: 6kg cylinder of C4  STANAG 4569 Level 2 mine

  19. Creation of the Driver Fixed Heel Point (FHP) CAD Accommodation Model for Military Ground Vehicle Design

    Science.gov (United States)

    2016-08-04

    Standard: Human Engineering, 2012. The unifying factor amongst these is the requirement to accommodate the central 90% of the Soldier population . MIL...Heel Point (FHP), accommodation model, occupant work space, central 90% of the Soldier population , encumbrance, posture and position, computer aided...which the occupant is an integral element of vehicle workstation design. Ensuring that a given percentage of the population can sit safely and

  20. Understanding why a Ground Combat Vehicle that Carries Nine Dismounts is Important to the Army

    Science.gov (United States)

    2013-01-01

    cites a quote by GEN Donn Starry, TRADOC commander from 1977 to 1981, in which he notes, “We in TRADOC . . . decided to put the TOW on the MICV because...Carmichael, John M., “Devising Doctrine for the Bradley Fighting Vehicle Platoon Dismount Element—Finding the Right Starting Point,” Fort...Mahon, John K., and Romana Danysh, Army Lineage Series: Infantry, Part I: Regular Army, Washington, D.C.: Office of the Chief of Military History, United

  1. Practical To Tactical: Making the Case for a Shift in Ground Vehicle Robotics

    Science.gov (United States)

    2012-05-10

    Active Safety Vehicle Controls Automotive Sensors (CMOS Stereo Camera, Single Chip Radar , Low Cost Lidar) Drive-By-Wire (Electronically...UNCLASSIFIED 15 Forward Automotive Radar Camera Electric Power Assist Steering (EPAS) Steering Position Sensor Steering Torque Sensor ESC...I C R M x x x V UNCLASSIFIED T 1 r t TECHNOLOGY DRNEN. WARF~n1a~ rUUI~~. 20 Automotive Radar Stereo Camera Side Blind Zone Radar RG31

  2. H2 control of a one-quarter semi-active ground vehicle suspension

    Directory of Open Access Journals (Sweden)

    L.C. Félix-Herrán

    2016-06-01

    Full Text Available Magneto-rheological (MR dampers are effective solutions in improving vehicle stability and passenger comfort. However, handling these dampers implies a strong effort in modeling and control. This research proposes an H2 controller, based on a Takagi–Sugeno (T–S fuzzy model, for a two-degrees-of-freedom (2-DOF one-quarter vehicle semi-active suspension with an MR damper; a system with important applications in automotive industry. Regarding performance criteria (in frequency domain handled herein, the developed controller considerably improves the passive suspension's efficiency. Moreover, nonlinear actuator dynamics usually avoided in reported work, is included in controller's synthesis; improving the relevance of research outcomes because the controller is synthesized from a closer-to-reality suspension model. Going further, outcomes of this research are compared (based on frequency domain performance criteria and a common time domain test with reported work to highlight the outstanding results. H2 controller is given in terms of quadratic Lyapunov stability theory and carried out by means of Linear Matrix Inequalities (LMI, and the command signal is applied via the Parallel Distributed Compensation (PDC approach. A case of study, with real data, is developed and simulation work supports the results. The methodology applied herein can be extended to include other vehicle suspension's dynamics towards a general chassis control.

  3. A Novel OD Estimation Method Based on Automatic Vehicle Identification Data

    Science.gov (United States)

    Sun, Jian; Feng, Yu

    With the development and application of Automatic Vehicle Identification (AVI) technologies, a novel high resolution OD estimation method was proposed based on AVI detector information. 4 detected categories (Ox + Dy, Ox/Dy + Path(s), Ox/Dy, Path(s)) were divided at the first step. Then the initial OD matrix was updated using the Ox + Dy sample information considering the AVI detector errors. Referenced by particle filter, the link-path relationship data were revised using the last 3 categories information based on Bayesian inference and the possible trajectory and OD were determined using Monte Carlo random process at last. Finally, according to the current application of video detector in Shanghai, the North-South expressway was selected as the testbed which including 17 OD pairs and 9 AVI detectors. The results show that the calculated average relative error is 12.09% under the constraints that the simulation error is under 15% and the detector error is about 10%. It also shows that this method is highly efficient and can fully using the partial vehicle trajectory which can be satisfied with the dynamic traffic management application in reality.

  4. 75 FR 64779 - Identification of Interstate Motor Vehicles: New York City, Cook County, and New Jersey Tax...

    Science.gov (United States)

    2010-10-20

    ... Federal Motor Carrier Safety Administration Identification of Interstate Motor Vehicles: New York City... Jersey, New York City, and Cook County, Illinois are preempted by Federal law. The Safe, Accountable... York City's Administrative Code, Sec. 11-809, requires CMVs used principally in New York City or in...

  5. NPSNET: Real-Time 3D Ground-Based Vehicle Dynamics

    Science.gov (United States)

    1992-03-01

    Meriam et.al., 86]1. Motion is produced by a simplified simulation of dynamics, that describes the linear and angular accelerations of a rigid body in...from the definition of the mass center as covered in statics, is given by 6 mr = Emir, (Eq. 2.1) where the total mass M = Emi [ Meriam et. al., 86]. At...Jurewicz, T., "A Real Time Autonomous Underwater Vehicle Dynamic Simulator," M.S. Thesis, Naval Postgraduate School, Monterey, CA., June 1989 [ Meriam et. al

  6. Cross-Correlation-Based Structural System Identification Using Unmanned Aerial Vehicles

    Directory of Open Access Journals (Sweden)

    Hyungchul Yoon

    2017-09-01

    Full Text Available Computer vision techniques have been employed to characterize dynamic properties of structures, as well as to capture structural motion for system identification purposes. All of these methods leverage image-processing techniques using a stationary camera. This requirement makes finding an effective location for camera installation difficult, because civil infrastructure (i.e., bridges, buildings, etc. are often difficult to access, being constructed over rivers, roads, or other obstacles. This paper seeks to use video from Unmanned Aerial Vehicles (UAVs to address this problem. As opposed to the traditional way of using stationary cameras, the use of UAVs brings the issue of the camera itself moving; thus, the displacements of the structure obtained by processing UAV video are relative to the UAV camera. Some efforts have been reported to compensate for the camera motion, but they require certain assumptions that may be difficult to satisfy. This paper proposes a new method for structural system identification using the UAV video directly. Several challenges are addressed, including: (1 estimation of an appropriate scale factor; and (2 compensation for the rolling shutter effect. Experimental validation is carried out to validate the proposed approach. The experimental results demonstrate the efficacy and significant potential of the proposed approach.

  7. Situational awareness for unmanned ground vehicles in semi-structured environments

    Science.gov (United States)

    Goodsell, Thomas G.; Snorrason, Magnus; Stevens, Mark R.

    2002-07-01

    Situational Awareness (SA) is a critical component of effective autonomous vehicles, reducing operator workload and allowing an operator to command multiple vehicles or simultaneously perform other tasks. Our Scene Estimation & Situational Awareness Mapping Engine (SESAME) provides SA for mobile robots in semi-structured scenes, such as parking lots and city streets. SESAME autonomously builds volumetric models for scene analysis. For example, a SES-AME equipped robot can build a low-resolution 3-D model of a row of cars, then approach a specific car and build a high-resolution model from a few stereo snapshots. The model can be used onboard to determine the type of car and locate its license plate, or the model can be segmented out and sent back to an operator who can view it from different viewpoints. As new views of the scene are obtained, the model is updated and changes are tracked (such as cars arriving or departing). Since the robot's position must be accurately known, SESAME also has automated techniques for deter-mining the position and orientation of the camera (and hence, robot) with respect to existing maps. This paper presents an overview of the SESAME architecture and algorithms, including our model generation algorithm.

  8. An MPC Algorithm with Combined Speed and Steering Control for Obstacle Avoidance in Autonomous Ground Vehicles

    Science.gov (United States)

    2015-04-24

    be an adequate interpretation in certain applications such as small ground robots . However, for the AGVs that are at least the size of a passenger... problematic , because the OCP solver requires all functions to be twice continuously differentiable. To address this challenge, the safe region is...avoidance for manipulators and mobile robots ,” International Journal of Robotics Research, vol. 5, pp. 90-98, 1986. [4] S. Shimoda, Y. Kuroda, and K

  9. Systems Engineering Approach To Ground Combat Vehicle Survivability In Urban Operations

    Science.gov (United States)

    2016-09-01

    of global urbanization, planning for urban operations is critical to the execution and success of any military campaign. The U.S. Army describes...for the enemy to prepare for the likely attack direction and to plan coordinated attacks against the incoming ground force. Enemy sensors can also...The Israel Aerospace Industries (IAI) is developing an integrated counter IED suite known as the Counter IED & Mine Suite ( CIMS ). According to Eshel

  10. Finite Element Optimization for Nondestructive Evaluation on a Graphics Processing Unit for Ground Vehicle Hull Inspection

    Science.gov (United States)

    2013-08-22

    GPU ,GA, genetic algorithm, FE, optimization, CUDA , Damage, Evaluation 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF... GPU with CUDA architecture [4]). There is however a severe memory limit – 4 GB at present. This would limit large problems as well as optimization...August 2013 UNCLASSIFIED UNCLASSIFIED Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 FE Optimization for NDE on GPUs for Ground

  11. A REVIEW OF COMPUTER VISION SYSTEM FOR THE VEHICLE IDENTIFICATION AND CLASSIFICATION FROM ONLINE AND OFFLINE VIDEOS

    Directory of Open Access Journals (Sweden)

    Baljit Singh Mokha

    2015-10-01

    Full Text Available The traffic on the roads is increasing day by day. There is dire need of developing an automation system that can effectively manage and control the traffic on roads. The traffic data of multiple vehicle types on roads is also important for taking various decisions related to traffic. A video based traffic data collection system for multiple vehicle types is helpful for monitoring vehicles under homogenous and heterogeneous traffic conditions. In this paper, we have studied different methods for the identification, classification and counting vehicles from online and offline videos in India as well as other countries. The paper also discusses the various applications of video based automatic traffic control system. The various challenges faced by the researchers for developing such systems are also discussed.

  12. Optical embedded dust sensor for engine protection and early warning on M1 Abrams/ground combat vehicles

    Science.gov (United States)

    Lin, Hai; Waldherr, Gregor A.; Burch, Timothy

    2012-06-01

    The Dual Optical Embedded Dust Sensor (DOEDS) is designed for the sensitive, accurate detection of particles for preventive health monitoring of the AGT1500 engine and M1 Abrams/Ground Combat Vehicles (GCVs). DOEDS is a real-time sensor that uses an innovative combination of optical particle sensing technologies and mechanical packaging in a rugged, compact and non-intrusive optical design. The optical sensor, implementing both a single particle sensor and a mass sensor, can operate in harsh environments (up to 400°F) to meet the particle size, size distribution, mass concentration, and response time criteria. The sensor may be flush- or inline-mounted in multiple engine locations and environments.

  13. Autonomous urban reconnaissance ingress system (AURIS): providing a tactically relevant autonomous door-opening kit for unmanned ground vehicles

    Science.gov (United States)

    Shane, David J.; Rufo, Michael A.; Berkemeier, Matthew D.; Alberts, Joel A.

    2012-06-01

    The Autonomous Urban Reconnaissance Ingress System (AURIS™) addresses a significant limitation of current military and first responder robotics technology: the inability of reconnaissance robots to open doors. Leveraging user testing as a baseline, the program has derived specifications necessary for military personnel to open doors with fielded UGVs (Unmanned Ground Vehicles), and evaluates the technology's impact on operational mission areas: duration, timing, and user patience in developing a tactically relevant, safe, and effective system. Funding is provided through the US ARMY Tank Automotive Research, Development and Engineering Center (TARDEC) and the project represents a leap forward in perception, autonomy, robotic implements, and coordinated payload operation in UGVs. This paper describes high level details of specification generation, status of the last phase of development, an advanced view of the system autonomy capability, and a short look ahead towards the ongoing work on this compelling and important technology.

  14. The Analytical Review of the Condition of Heavy Class Military and Dual-Purpose Unmanned Ground Vehicle

    Directory of Open Access Journals (Sweden)

    Blokhin Aleksandr

    2015-01-01

    Full Text Available The purpose of this article is the evaluation of the actual condition of heavy (weight more than 700 kg military robotics and dual-purpose robotics in the world. The extensive review of the world market of heavy class military unmanned ground vehicle was made. All reviewed robots are used at present time or exist like prototypes. All robots were systematized by most important technical characteristics. In the closing of article the analysis of the reviewed heavy class dual purpose UGVs are presented. Based on the analysis the conclusion about actual condition of the heavy military robotics and dual-purpose robotics was made. Also the most promising ways and tendencies of development are representeds.

  15. Leader Follower Formation Control of Ground Vehicles Using Dynamic Pixel Count and Inverse Perspective Mapping

    Directory of Open Access Journals (Sweden)

    S.M.Vaitheeswarana

    2014-10-01

    Full Text Available This paper deals with leader-follower formations of non-holonomic mobile robots, introducing a formation control strategy based on pixel counts using a commercial grade electro optics camera. Localization of the leader for motions along line of sight as well as the obliquely inclined directions are considered based on pixel variation of the images by referencing to two arbitrarily designated positions in the image frames. Based on an established relationship between the displacement of the camera movement along the viewing direction and the difference in pixel counts between reference points in the images, the range and the angle estimate between the follower camera and the leader is calculated. The Inverse Perspective Transform is used to account for non linear relationship between the height of vehicle in a forward facing image and its distance from the camera. The formulation is validated with experiments.

  16. Design of Secured Ground Vehicle Event Data Recorder for Data Analysis

    Directory of Open Access Journals (Sweden)

    Mr. Love Sharma

    2017-03-01

    Full Text Available The Event Data Recorder (EDR is now one of the important components installed in the vehicles by the automakers since it is helping in calculating an independent measurement of crash severity which is far better than the traditional systems used. There is limited research is done on the domain. In this paper we are going to propose an EDR which is based on ARM controller and will sense the alcohol, brake pressed, Speed, Location, Humidity, and Temperature. The data collected from the sensors is aggregated using a threshold-based technique, then the data is encrypted using RC6 and finally, the data is mined for knowledge using top k rules.

  17. Theoretical Grounds of Identification of the Essence of the Enterprise Development Efficiency Category

    Directory of Open Access Journals (Sweden)

    Adzhavenko Maryna M.

    2014-02-01

    Full Text Available Modern economic conditions put a new problem in front of scientists, namely: capability of an enterprise to survive in the unfavourable external environment. This problem is a system and complex one and its solution is within the plane of management of capital, personnel, development, efficiency, etc. The article marks out that efficiency is a corner stone of the modern economic science, which justifies studies of the gnoseological essence of the efficiency category. The main goal of the article lies in the study of scientific and theoretical grounds of formation of the enterprise development efficiency under modern conditions of the changing internal and external environments. The other goals of the article are identification of the essence of the development efficiency category, deepening the theoretical foundation of assessment of efficiency of enterprise development in the modern economic science. The article conducts an ontological analysis of the essence and goals of the enterprise development efficiency notion, studies evolution of scientific approaches and systemises theoretical provisions of the specified category and their assessment in the economic science. In the result of the study the article identifies a new vector of theoretical grounds and dominating logic of formation of the methodology of assessment of efficiency of enterprises under conditions of innovation development of the state, namely: it underlines principles of systemacy, complexity, self-organisation, significance of human capital as an important factor of increase of efficiency and development. Development of methodological grounds of assessment of efficiency of enterprise innovation development is a prospective direction of further studies.

  18. A New Physical Parameter Identification Method for Two-Axis On-Road Vehicles: Simulation and Experiment

    Directory of Open Access Journals (Sweden)

    Minyi Zheng

    2015-01-01

    Full Text Available A new physical parameter identification method for two-axis on-road vehicle is presented. The modal parameters of vehicle are identified by using the State Variable Method. To make it possible to determine the matrices M, C, and K of the vehicle, a known mass matrix ΔM is designed to add into the vehicle in order to increase the number of equations ensuring that the number of equations is more than the one of unknowns. Therefore, the physical parameters of vehicle can be estimated by using the least square method. To validate the presented method, a numerical simulation example and an experiment example are given in this paper. The numerical simulation example shows that the largest of absolute value of percentage error is 1.493%. In the experiment example, a school bus is employed in study for the parameter identification. The simulation result from full-car model with the estimated physical parameters is compared with the test result. The agreement between the simulation and the test proves the effectiveness of the proposed estimation method.

  19. Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles

    Science.gov (United States)

    Eom, Hwisoo; Lee, Sang Hun

    2015-01-01

    A majority of recently developed advanced vehicles have been equipped with various automated driver assistance systems, such as adaptive cruise control (ACC) and lane keeping assistance systems. ACC systems have several operational modes, and drivers can be unaware of the mode in which they are operating. Because mode confusion is a significant human error factor that contributes to traffic accidents, it is necessary to develop user interfaces for ACC systems that can reduce mode confusion. To meet this requirement, this paper presents a new human-automation interaction design methodology in which the compatibility of the machine and interface models is determined using the proposed criteria, and if the models are incompatible, one or both of the models is/are modified to make them compatible. To investigate the effectiveness of our methodology, we designed two new interfaces by separately modifying the machine model and the interface model and then performed driver-in-the-loop experiments. The results showed that modifying the machine model provides a more compact, acceptable, effective, and safe interface than modifying the interface model. PMID:26076406

  20. Proceedings of the 7th Annual TARDEC Ground Vehicle Survivability Symposium, March 26-28, 1996, Naval Postgraduate School, Monterey, CA Volume 1 - Unclassified Session Papers

    Science.gov (United States)

    1996-05-01

    Submitted J. Cardenas , U.S. Army TARDEC P-10 Ground Combat Vehicle Survivability Database Vol. 1 517 J. Olejar, C. Glausier, D. Brassard, K. Gantt, N. Funk... algebra . This change in methodology should go a long way toward alleviating the sampling problem that has been identi- fied in the IDA and SIRVICE studies

  1. Application of star identification using pattern matching to space ground systems at GSFC

    Science.gov (United States)

    Fink, D.; Shoup, D.

    1994-01-01

    This paper reports the application of pattern recognition techniques for star identification based on those proposed by Van Bezooijen to space ground systems for near-real-time attitude determination. A prototype was developed using these algorithms, which was used to assess the suitability of these techniques for support of the X-Ray Timing Explorer (XTE), Submillimeter Wave Astronomy Satellite (SWAS), and the Solar and Heliospheric Observatory (SOHO) missions. Experience with the prototype was used to refine specifications for the operational system. Different geometry tests appropriate to the mission requirements of XTE, SWAS, and SOHO were adopted. The applications of these techniques to upcoming mission support of XTE, SWAS, and SOHO are discussed.

  2. Identification of moving vehicle forces on bridge structures via moving average Tikhonov regularization

    Science.gov (United States)

    Pan, Chu-Dong; Yu, Ling; Liu, Huan-Lin

    2017-08-01

    Traffic-induced moving force identification (MFI) is a typical inverse problem in the field of bridge structural health monitoring. Lots of regularization-based methods have been proposed for MFI. However, the MFI accuracy obtained from the existing methods is low when the moving forces enter into and exit a bridge deck due to low sensitivity of structural responses to the forces at these zones. To overcome this shortcoming, a novel moving average Tikhonov regularization method is proposed for MFI by combining with the moving average concepts. Firstly, the bridge-vehicle interaction moving force is assumed as a discrete finite signal with stable average value (DFS-SAV). Secondly, the reasonable signal feature of DFS-SAV is quantified and introduced for improving the penalty function (∣∣x∣∣2 2) defined in the classical Tikhonov regularization. Then, a feasible two-step strategy is proposed for selecting regularization parameter and balance coefficient defined in the improved penalty function. Finally, both numerical simulations on a simply-supported beam and laboratory experiments on a hollow tube beam are performed for assessing the accuracy and the feasibility of the proposed method. The illustrated results show that the moving forces can be accurately identified with a strong robustness. Some related issues, such as selection of moving window length, effect of different penalty functions, and effect of different car speeds, are discussed as well.

  3. Multi-objective Genetic Algorithm for System Identification and Controller Optimization of Automated Guided Vehicle

    Directory of Open Access Journals (Sweden)

    Xing Wu

    2011-07-01

    Full Text Available This paper presents a multi-objective genetic algorithm (MOGA with Pareto optimality and elitist tactics for the control system design of automated guided vehicle (AGV. The MOGA is used to identify AGV driving system model and optimize its servo control system sequentially. In system identification, the model identified by least square method is adopted as an evolution tutor who selects the individuals having balanced performances in all objectives as elitists. In controller optimization, the velocity regulating capability required by AGV path tracking is employed as decision-making preferences which select Pareto optimal solutions as elitists. According to different objectives and elitist tactics, several sub-populations are constructed and they evolve concurrently by using independent reproduction, neighborhood mutation and heuristic crossover. The lossless finite precision method and the multi-objective normalized increment distance are proposed to keep the population diversity with a low computational complexity. Experiment results show that the cascaded MOGA have the capability to make the system model consistent with AGV driving system both in amplitude and phase, and to make its servo control system satisfy the requirements on dynamic performance and steady-state accuracy in AGV path tracking.

  4. Multi-level Bayesian safety analysis with unprocessed Automatic Vehicle Identification data for an urban expressway.

    Science.gov (United States)

    Shi, Qi; Abdel-Aty, Mohamed; Yu, Rongjie

    2016-03-01

    In traffic safety studies, crash frequency modeling of total crashes is the cornerstone before proceeding to more detailed safety evaluation. The relationship between crash occurrence and factors such as traffic flow and roadway geometric characteristics has been extensively explored for a better understanding of crash mechanisms. In this study, a multi-level Bayesian framework has been developed in an effort to identify the crash contributing factors on an urban expressway in the Central Florida area. Two types of traffic data from the Automatic Vehicle Identification system, which are the processed data capped at speed limit and the unprocessed data retaining the original speed were incorporated in the analysis along with road geometric information. The model framework was proposed to account for the hierarchical data structure and the heterogeneity among the traffic and roadway geometric data. Multi-level and random parameters models were constructed and compared with the Negative Binomial model under the Bayesian inference framework. Results showed that the unprocessed traffic data was superior. Both multi-level models and random parameters models outperformed the Negative Binomial model and the models with random parameters achieved the best model fitting. The contributing factors identified imply that on the urban expressway lower speed and higher speed variation could significantly increase the crash likelihood. Other geometric factors were significant including auxiliary lanes and horizontal curvature.

  5. The Seismic Response of High-Speed Railway Bridges Subjected to Near-Fault Forward Directivity Ground Motions Using a Vehicle-Track-Bridge Element

    Directory of Open Access Journals (Sweden)

    Chen Ling-kun

    2014-01-01

    Full Text Available Based on the Next Generation Attenuation (NGA project ground motion library, the finite element model of the high-speed railway vehicle-bridge system is established. The model was specifically developed for such system that is subjected to near-fault ground motions. In addition, it accounted for the influence of the rail irregularities. The vehicle-track-bridge (VTB element is presented to simulate the interaction between train and bridge, in which a train can be modeled as a series of sprung masses concentrated at the axle positions. For the short period railway bridge, the results from the case study demonstrate that directivity pulse effect tends to increase the seismic responses of the bridge compared with far-fault ground motions or nonpulse-like motions and the directivity pulse effect and high values of the vertical acceleration component can notably influence the hysteretic behaviour of piers.

  6. 智能车辆动力学模型辨识与自主控制%Identification of Dynamics Model and Self-control for Intelligent Vehicle

    Institute of Scientific and Technical Information of China (English)

    王萌; 史忠科

    2014-01-01

    针对试凑法优化控制参数困难、控制精度不高、控制律环境适应性差的问题,对智能车辆的动力学模型和自主控制进行了研究。在地面车辆实验中,通过给小车施加伪随机序列舵控信号,使得小车的行驶状态被充分激励;在获得充分激励的小车速度、位置、姿态、横摆角速率状态后,利用系统辨识方法建立了智能小车动力学模型;在动力学模型的基础上,设计了小车自主驾驶控制律。跑车试验表明所提模型的预测结果与测量结果具有较好的一致性;控制仿真结果表明,设计的控制律能够保证小车完成预定轨迹自主驾驶。%As to the problems of trial-and-error method like the difficulty of control parameters optimization ,low control precision and poor adaptability of control law ,this paper researches the dynamics model and self-control for Intelligent Vehicle .In the vehicle experiments ,the running state of the vehicle is sufficiently excited by applying pseudo-random sequences signals to the car steering control .After obtaining this vehicle′s speed ,position ,attitude and yaw rate ,dynamics model of the Intelligent Vehicle is established by use of system identification .Based on the dynamics model ,designing autonomous driving control law of Intelligent Vehicle .The ground experiments suggest good consistency between predicted results of proposed model and actual measured results .The control simulations show that designed control law ensure the completion of vehicle autonomous driving under given track .

  7. Counter tunnel exploration, mapping, and localization with an unmanned ground vehicle

    Science.gov (United States)

    Larson, Jacoby; Okorn, Brian; Pastore, Tracy; Hooper, David; Edwards, Jim

    2014-06-01

    Covert, cross-border tunnels are a security vulnerability that enables people and contraband to illegally enter the United States. All of these tunnels to-date have been constructed for the purpose of drug smuggling, but they may also be used to support terrorist activity. Past robotic tunnel exploration efforts have had limited success in aiding law enforcement to explore and map the suspect cross-border tunnels. These efforts have made use of adapted explosive ordnance disposal (EOD) or pipe inspection robotic systems that are not ideally suited to the cross-border tunnel environment. The Counter Tunnel project was sponsored by the Office of Secretary of Defense (OSD) Joint Ground Robotics Enterprise (JGRE) to develop a prototype robotic system for counter-tunnel operations, focusing on exploration, mapping, and characterization of tunnels. The purpose of this system is to provide a safe and effective solution for three-dimensional (3D) localization, mapping, and characterization of a tunnel environment. The system is composed of the robotic mobility platform, the mapping sensor payload, and the delivery apparatus. The system is able to deploy and retrieve the robotic mobility platform through a 20-cm-diameter borehole into the tunnel. This requirement posed many challenges in order to design and package the sensor and robotic system to fit through this narrow opening and be able to perform the mission. This paper provides a short description of a few aspects of the Counter Tunnel system such as mobility, perception, and localization, which were developed to meet the unique challenges required to access, explore, and map tunnel environments.

  8. Study of high-definition and stereoscopic head-aimed vision for improved teleoperation of an unmanned ground vehicle

    Science.gov (United States)

    Tyczka, Dale R.; Wright, Robert; Janiszewski, Brian; Chatten, Martha Jane; Bowen, Thomas A.; Skibba, Brian

    2012-06-01

    Nearly all explosive ordnance disposal robots in use today employ monoscopic standard-definition video cameras to relay live imagery from the robot to the operator. With this approach, operators must rely on shadows and other monoscopic depth cues in order to judge distances and object depths. Alternatively, they can contact an object with the robot's manipulator to determine its position, but that approach carries with it the risk of detonation from unintentionally disturbing the target or nearby objects. We recently completed a study in which high-definition (HD) and stereoscopic video cameras were used in addition to conventional standard-definition (SD) cameras in order to determine if higher resolutions and/or stereoscopic depth cues improve operators' overall performance of various unmanned ground vehicle (UGV) tasks. We also studied the effect that the different vision modes had on operator comfort. A total of six different head-aimed vision modes were used including normal-separation HD stereo, SD stereo, "micro" (reduced separation) SD stereo, HD mono, and SD mono (two types). In general, the study results support the expectation that higher resolution and stereoscopic vision aid UGV teleoperation, but the degree of improvement was found to depend on the specific task being performed; certain tasks derived notably more benefit from improved depth perception than others. This effort was sponsored by the Joint Ground Robotics Enterprise under Robotics Technology Consortium Agreement #69-200902 T01. Technical management was provided by the U.S. Air Force Research Laboratory's Robotics Research and Development Group at Tyndall AFB, Florida.

  9. Seasonal associations and atmospheric transport distances of Fusarium collected with unmanned aerial vehicles and ground-based sampling devices

    Science.gov (United States)

    Schmale, David; Ross, Shane; Lin, Binbin

    2014-05-01

    Spores of fungi in the genus Fusarium may be transported through the atmosphere over long distances. Members of this genus are important pathogens and mycotoxin producers. New information is needed to characterize seasonal trends in atmospheric loads of Fusarium and to pinpoint the source(s) of inoculum at both local (farm) and regional (state or country) scales. Spores of Fusarium were collected from the atmosphere in an agricultural ecosystem in Blacksburg, VA, USA using a Burkard volumetric sampler (BVS) 1 m above ground level and autonomous unmanned aerial vehicles (UAVs) 100 m above ground level. More than 2,200 colony forming units (CFUs) of Fusarium were collected during 104 BVS sampling periods and 180 UAV sampling periods over four calendar years (2009-2012). Spore concentrations ranged from 0 to 13 and 0 to 23 spores m-3 for the BVS and the UAVs, respectively. Spore concentrations were generally higher in the fall, spring, and summer, and lower in the winter. Spore concentrations from the BVS were generally higher than those from the UAVs for both seasonal and hourly collections. Some of the species of Fusarium identified from our collections have not been previously reported in the state of Virginia. A Gaussian plume transport model was used to estimate distances to the potential inoculum source(s) by season. This work extends previous studies showing an association between atmospheric transport barriers (Lagrangian coherent structures or LCSs) and the movement of Fusarium in the lower atmosphere. An increased understanding of the aerobiology of Fusarium may contribute to new and improved control strategies for diseases causes by fusaria in the future.

  10. Tip-over prevention through heuristic reactive behaviors for unmanned ground vehicles

    Science.gov (United States)

    Talke, Kurt; Kelley, Leah; Longhini, Patrick; Catron, Garret

    2014-06-01

    Skid-steer teleoperated robots are commonly used by military and civilian crews to perform high-risk, dangerous and critical tasks such as bomb disposal. Their missions are often performed in unstructured environments with irregular terrain, such as inside collapsed buildings or on rough terrain covered with a variety of media, such as sand, brush, mud, rocks and debris. During such missions, it is often impractical if not impossible to send another robot or a human operator to right a toppled robot. As a consequence, a robot tip-over event usually results in mission failure. To make matters more complicated, such robots are often equipped with heavy payloads that raise their centers of mass and hence increase their instability. Should the robot be equipped with a manipulator arm or flippers, it may have a way to self-right. The majority of manipulator arms are not designed for and are likely to be damaged during self-righting procedures, however, which typically have a low success rate. Furthermore, those robots not equipped with manipulator arms or flippers have no self-righting capabilities. Additionally, due to the on-board camera frame of reference, the video feed may cause the robot to appear to be on at level ground, when it actually may be on a slope nearing tip-over. Finally, robot operators are often so focused on the mission at hand they are oblivious to their surroundings, similar to a kid playing a video game. While this may not be an issue in the living room, it is not a good scenario to experience on the battlefield. Our research seeks to remove tip-over monitoring from the already large list of tasks an operator must perform. An autonomous tip-over prevention behavior for a mobile robot with a static payload has been developed, implemented and experimentally validated on two different teleoperated robotic platforms. Suitable for use with both teleoperated and autonomous robots, the prevention behavior uses the force-angle stability measure

  11. Rapid Detection Methods for Asphalt Pavement Thicknesses and Defects by a Vehicle-Mounted Ground Penetrating Radar (GPR) System.

    Science.gov (United States)

    Dong, Zehua; Ye, Shengbo; Gao, Yunze; Fang, Guangyou; Zhang, Xiaojuan; Xue, Zhongjun; Zhang, Tao

    2016-12-06

    The thickness estimation of the top surface layer and surface layer, as well as the detection of road defects, are of great importance to the quality conditions of asphalt pavement. Although ground penetrating radar (GPR) methods have been widely used in non-destructive detection of pavements, the thickness estimation of the thin top surface layer is still a difficult problem due to the limitations of GPR resolution and the similar permittivity of asphalt sub-layers. Besides, the detection of some road defects, including inadequate compaction and delamination at interfaces, require further practical study. In this paper, a newly-developed vehicle-mounted GPR detection system is introduced. We used a horizontal high-pass filter and a modified layer localization method to extract the underground layers. Besides, according to lab experiments and simulation analysis, we proposed theoretical methods for detecting the degree of compaction and delamination at the interface, respectively. Moreover, a field test was carried out and the estimated results showed a satisfactory accuracy of the system and methods.

  12. Rapid Detection Methods for Asphalt Pavement Thicknesses and Defects by a Vehicle-Mounted Ground Penetrating Radar (GPR System

    Directory of Open Access Journals (Sweden)

    Zehua Dong

    2016-12-01

    Full Text Available The thickness estimation of the top surface layer and surface layer, as well as the detection of road defects, are of great importance to the quality conditions of asphalt pavement. Although ground penetrating radar (GPR methods have been widely used in non-destructive detection of pavements, the thickness estimation of the thin top surface layer is still a difficult problem due to the limitations of GPR resolution and the similar permittivity of asphalt sub-layers. Besides, the detection of some road defects, including inadequate compaction and delamination at interfaces, require further practical study. In this paper, a newly-developed vehicle-mounted GPR detection system is introduced. We used a horizontal high-pass filter and a modified layer localization method to extract the underground layers. Besides, according to lab experiments and simulation analysis, we proposed theoretical methods for detecting the degree of compaction and delamination at the interface, respectively. Moreover, a field test was carried out and the estimated results showed a satisfactory accuracy of the system and methods.

  13. Force Limiting Vibration Tests Evaluated from both Ground Acoustic Tests and FEM Simulations of a Flight Like Vehicle System Assembly

    Science.gov (United States)

    Smith, Andrew; LaVerde, Bruce; Waldon, James; Hunt, Ron

    2014-01-01

    Marshall Space Flight Center has conducted a series of ground acoustic tests with the dual goals of informing analytical judgment, and validating analytical methods when estimating vibroacoustic responses of launch vehicle subsystems. The process of repeatedly correlating finite element-simulated responses with test-measured responses has assisted in the development of best practices for modeling and post-processing. In recent work, force transducers were integrated to measure interface forces at the base of avionics box equipment. Other force data was indirectly measured using strain gauges. The combination of these direct and indirect force measurements has been used to support and illustrate the advantages of implementing the Force Limiting approach for equipment qualification tests. The comparison of force response from integrated system level tests to measurements at the same locations during component level vibration tests provides an excellent illustration. A second comparison of the measured response cases from the system level acoustic tests to finite element simulations has also produced some principles for assessing the suitability of Finite Element Models (FEMs) for making vibroacoustics estimates. The results indicate that when FEM models are employed to guide force limiting choices, they should include sufficient detail to represent the apparent mass of the system in the frequency range of interest.

  14. Use of 3D laser radar for navigation of unmanned aerial and ground vehicles in urban and indoor environments

    Science.gov (United States)

    Uijt de Haag, Maarten; Venable, Don; Smearcheck, Mark

    2007-04-01

    This paper discusses the integration of Inertial measurements with measurements from a three-dimensional (3D) imaging sensor for position and attitude determination of unmanned aerial vehicles (UAV) and autonomous ground vehicles (AGV) in urban or indoor environments. To enable operation of UAVs and AGVs at any time in any environment a Precision Navigation, Attitude, and Time (PNAT) capability is required that is robust and not solely dependent on the Global Positioning System (GPS). In urban and indoor environments a GPS position capability may not only be unavailable due to shadowing, significant signal attenuation or multipath, but also due to intentional denial or deception. Although deep integration of GPS and Inertial Measurement Unit (IMU) data may prove to be a viable solution an alternative method is being discussed in this paper. The alternative solution is based on 3D imaging sensor technologies such as Flash Ladar (Laser Radar). Flash Ladar technology consists of a modulated laser emitter coupled with a focal plane array detector and the required optics. Like a conventional camera this sensor creates an "image" of the environment, but producing a 2D image where each pixel has associated intensity vales the flash Ladar generates an image where each pixel has an associated range and intensity value. Integration of flash Ladar with the attitude from the IMU allows creation of a 3-D scene. Current low-cost Flash Ladar technology is capable of greater than 100 x 100 pixel resolution with 5 mm depth resolution at a 30 Hz frame rate. The proposed algorithm first converts the 3D imaging sensor measurements to a point cloud of the 3D, next, significant environmental features such as planar features (walls), line features or point features (corners) are extracted and associated from one 3D imaging sensor frame to the next. Finally, characteristics of these features such as the normal or direction vectors are used to compute the platform position and attitude

  15. 77 FR 17105 - Identification of Interstate Motor Vehicles: City of Chicago, IL Registration Emblem Requirement...

    Science.gov (United States)

    2012-03-23

    ... through the International Fuel Tax Agreement; (3) Under a State law regarding motor vehicle license plates... section 31704; (2) Under the International Fuel Tax Agreement under section 31705 or under an applicable... vehicle inspection standards under section 31136. FMCSA interprets Sec. 14506(b)(3) to establish...

  16. MATHEMATICAL MODEL OF HYBRID ELECTRIC VEHICLE HIGH-VOLTAGE BATTERY IDENTIFICATION

    Directory of Open Access Journals (Sweden)

    S. Serikov

    2010-01-01

    Full Text Available The mathematical model of hybrid electric vehicle NiMH high-voltage battery is obtained. This model allows to explore the interaction of vehicle tractive electric drive and high-voltage battery at the electric motive power motion and in the process of recuperation of braking kinetic energy.

  17. 螺旋地锚车的研制与应用%The Development and Application of the Spirally Mobile Ground Anchor Vehicle

    Institute of Scientific and Technical Information of China (English)

    翟建团; 李姣姣; 谢玉敏

    2012-01-01

    针对直臂地锚车在近距离无法完成施工作业和复合臂地锚车结构复杂、故障率高等问题,研制了螺旋地锚车。该地锚车主要由汽车底盘、副车架、吊臂总成、回转工作台、锚头加压钻进装置、液压系统及蛙形液压支腿等组成,不仅可用于普通地层打地锚,还可用于西南及东北地区冻土层地锚的钻进与拧出。现场应用情况表明,该地锚车可节省人力达90%以上,提高工作效率50%以上。%The straight arm cannot complete the short-distance construction operation. The composite arm ground anchor vehicle is complex in structure and high in failure rate. Considering these problems, the spirally mobile ground anchor vehicle was developed. The vehicle mainly consists of chassis, subframe, rotary worktable, anchor head pressure drilling device, hydraulic system and frog-shape hydraulic outrigger. It cannot only be used in ordi- nary formation ground anchoring but also in ground anchor drilling and pulling out in the frozen layers of southwest- ern and northeastern regions. The field application shows that the vehicle can save over 90% manpower and im- prove the operating efficiency by over 50%.

  18. Identification of pilot-vehicle dynamics from simulation and flight test

    Science.gov (United States)

    Hess, Ronald A.

    1990-01-01

    The paper discusses an identification problem in which a basic feedback control structure, or pilot control strategy, is hypothesized. Identification algorithms are employed to determine the particular form of pilot equalization in each feedback loop. It was found that both frequency- and time-domain identification techniques provide useful information.

  19. Determination of the effect of brand and product identification on consumer palatability ratings of ground beef patties.

    Science.gov (United States)

    Wilfong, A K; McKillip, K V; Gonzalez, J M; Houser, T A; Unruh, J A; Boyle, E A E; O'Quinn, T G

    2016-11-01

    The objective of this study was to determine the effect of brand and product identification on consumer palatability ratings of ground beef patties. Six treatments were used in the study: 90/10 Certified Angus Beef (CAB) ground sirloin, 90/10 ground beef, 80/20 CAB ground chuck, 80/20 ground chuck, 80/20 ground beef, and 73/27 CAB ground beef. Ground beef was processed into 151.2-g patties using a patty former with 2 consecutively formed patties assigned to blind consumer testing and the following 2 assigned to informed testing. Following cooking to 74°C, patties were cut into quarters and served to consumers. Consumers ( = 112) evaluated samples in 2 rounds for tenderness, juiciness, flavor liking, texture liking, and overall liking. Each trait was also rated as either acceptable or unacceptable. In the first round of testing, samples were blind evaluated, with no information about the treatments provided to consumers, but in the second round, product type and brand were disclosed prior to sample evaluation. Additionally, texture profile and shear force analyses were performed on patties from each treatment. Few differences were observed for palatability traits during blind consumer testing; however, during informed testing, 90/10 CAB ground sirloin was rated greatest ( brand disclosure. Increased ( branded product that received increased ( brand and product information, few consumers find differences in eating quality among ground beef treatments; however, when consumers are aware of the brand, fat level, and subprimal blend prior to sampling, these factors have a large impact on consumer eating satisfaction.

  20. Measuring Sunflower Nitrogen Status from AN Unmanned Aerial Vehicle-Based System and AN on the Ground Device

    Science.gov (United States)

    Agüera, F.; Carvajal, F.; Pérez, M.

    2011-09-01

    Precision agriculture recognizes the inherent spatial variability associated with soil characteristics, land morphology and crop growth, and uses this information to prescribe the most appropriate management strategy on a site-specific basis. To reach this task, the most important information related with crop growth is nutrient status, weed infestation, disease and pet affectation and water management. The application of fertilizer nitrogen to field crops is of critical importance because it determines plant's gro wth, vigour, colour and yield. Furthermore, nitrogen has been observed as a nutrient with high spatial variability in a single field, related to its high mobility. Some previous works have shown that is possible to measure crop nitrogen status with optical instruments. Since most leaf nitrogen is contained in chlorophyll molecules, there is a strong relationship between leaf nitrogen and leaf chlorophyll content, which is the basis for predicting crop nitrogen status by measuring leaf reflectance. So, sensors that can easily monitor crop nitrogen amount throughout the growing season at a high resolution to allow producers to reach their production goals, will give useful information to prescribe a crop management on a site-specific basis. Sunflower is a crop which is taking importance again because it can be used both for food and biofuel purposes, and it is widely cultivated in the South of Spain and other European countries.The aim of this work was to compare an index related with sunflower nitrogen status, deduced from multispectral images taken from an Unmanned Aerial Vehicle (UAV), with optical data collected with a ground-based platform.An ADC Lite Tetracam digital cam was mounted on a md4-200 Microdrones to take pictures of a sunflower field during the crop season. ADC Lite Tetracam is a single sensor digital camera designed for capture of visible light wavelength longer than 520 nm and near-infrared wavelength up to 920 nm. The md4

  1. MEASURING SUNFLOWER NITROGEN STATUS FROM AN UNMANNED AERIAL VEHICLE-BASED SYSTEM AND AN ON THE GROUND DEVICE

    Directory of Open Access Journals (Sweden)

    F. Agüera

    2012-09-01

    Full Text Available Precision agriculture recognizes the inherent spatial variability associated with soil characteristics, land morphology and crop growth, and uses this information to prescribe the most appropriate management strategy on a site-specific basis. To reach this task, the most important information related with crop growth is nutrient status, weed infestation, disease and pet affectation and water management. The application of fertilizer nitrogen to field crops is of critical importance because it determines plant's gro wth, vigour, colour and yield. Furthermore, nitrogen has been observed as a nutrient with high spatial variability in a single field, related to its high mobility. Some previous works have shown that is possible to measure crop nitrogen status with optical instruments. Since most leaf nitrogen is contained in chlorophyll molecules, there is a strong relationship between leaf nitrogen and leaf chlorophyll content, which is the basis for predicting crop nitrogen status by measuring leaf reflectance. So, sensors that can easily monitor crop nitrogen amount throughout the growing season at a high resolution to allow producers to reach their production goals, will give useful information to prescribe a crop management on a site-specific basis. Sunflower is a crop which is taking importance again because it can be used both for food and biofuel purposes, and it is widely cultivated in the South of Spain and other European countries.The aim of this work was to compare an index related with sunflower nitrogen status, deduced from multispectral images taken from an Unmanned Aerial Vehicle (UAV, with optical data collected with a ground-based platform.An ADC Lite Tetracam digital cam was mounted on a md4-200 Microdrones to take pictures of a sunflower field during the crop season. ADC Lite Tetracam is a single sensor digital camera designed for capture of visible light wavelength longer than 520 nm and near-infrared wavelength up to 920 nm. The

  2. Drag Identification & Reduction Technology (DIRECT) for Elastically Shaped Air Vehicles Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA and Boeing Phantom Works have been working on the Elastically Shaped Future Vehicle Concept (ESFVC) and have shown that aircraft with elastically shaped wings...

  3. Reducing impaired driving through the identification of Repeat Target Vehicles: A case study.

    Science.gov (United States)

    Stewart, James

    2012-02-01

    One of the most persistent groups of impaired drivers that are seemingly unaffected by social pressure, moral appeals, and the fear of arrest is that of the repeat impaired driver. This smaller group accounts for a disproportionate number of all impaired driving trips, often with high blood alcohol contents. New approaches are needed to identify and deal with the repeat impaired driver. We propose a method based on the discovery that almost 10% of all impaired driving calls for service involve repeat vehicles. Using the number of times a vehicle appears in our data, the average time to repeat, and the personality characteristics of the repeat impaired driver, we are able to create a comprehensive and predictive description of a Repeat Target Vehicle (RTV). Our method provides an opportunity to explore new and innovative crime reduction strategies that were never before possible. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Vehicles Identification Method Based on Traffic Remote Sensing Image%基于交通遥感图像处理的车辆目标识别方法

    Institute of Scientific and Technical Information of China (English)

    曹天扬; 申莉

    2014-01-01

    遥感技术可以获取城市全局的交通状况,弥补地面传感器的不足;针对交通遥感图像处理的核心问题“车辆目标识别”,设计了一种基于图层分离和最大类间方差阈值分割技术的识别算法;通过图层分离把原始图像转换为深、浅两个图层,将深色车、浅色车、路面三者的区分转换为了适于使用最大类间方差法的图像分割,即深色路面与深色车分割、浅色路面与浅色车分割;为了改善识别效果,还使用了图像辐射增强技术和形态学中的去噪技术;经测试,算法对浅色车的识别率大于80%,深色车的识别率大于75%。%Remote sensing technology can supply the general traffic conditions of city,and compensate for the sensors on the ground.A method for vehicles identification is presented,which can identify moving vehicles on the remote sensing image.This method consists of lay-ers separation and OSTU.The original image is separated to dark layer and bright layer firstly and then OSTU is used to process the two lay-ers.The multi-classification of dark vehicles and bright vehicles and road is changed into the classification of dark car and dark road and the classification of bright car and bright road.In order to improve identification result,remote sensing image enhancement and noise suppression technology based on Morphologic are used.This identification method had been tested,more than 80% bright vehicles and 75%dark vehicles can be identified.

  5. In-vehicle stereo vision system for identification of traffic conflicts between bus and pedestrian

    Directory of Open Access Journals (Sweden)

    Salvatore Cafiso

    2017-02-01

    Full Text Available The traffic conflict technique (TCT was developed as “surrogate measure of road safety” to identify near-crash events by using measures of the spatial and temporal proximity of road users. Traditionally applications of TCT focus on a specific site by the way of manually or automated supervision. Nowadays the development of in-vehicle (IV technologies provides new opportunities for monitoring driver behavior and interaction with other road users directly into the traffic stream. In the paper a stereo vision and GPS system for traffic conflict investigation is presented for detecting conflicts between vehicle and pedestrian. The system is able to acquire geo-referenced sequences of stereo frames that are used to provide real time information related to conflict occurrence and severity. As case study, an urban bus was equipped with a prototype of the system and a trial in the city of Catania (Italy was carried out analyzing conflicts with pedestrian crossing in front of the bus. Experimental results pointed out the potentialities of the system for collection of data that can be used to get suitable traffic conflict measures. Specifically, a risk index of the conflict between pedestrians and vehicles is proposed to classify collision probability and severity using data collected by the system. This information may be used to develop in-vehicle warning systems and urban network risk assessment.

  6. Forensic identification science evidence since Daubert: Part II--judicial reasoning in decisions to exclude forensic identification evidence on grounds of reliability.

    Science.gov (United States)

    Page, Mark; Taylor, Jane; Blenkin, Matt

    2011-07-01

    Many studies regarding the legal status of forensic science have relied on the U.S. Supreme Court's mandate in Daubert v. Merrell Dow Pharmaceuticals Inc., and its progeny in order to make subsequent recommendations or rebuttals. This paper focuses on a more pragmatic approach to analyzing forensic science's immediate deficiencies by considering a qualitative analysis of actual judicial reasoning where forensic identification evidence has been excluded on reliability grounds since the Daubert precedent. Reliance on general acceptance is becoming insufficient as proof of the admissibility of forensic evidence. The citation of unfounded statistics, error rates and certainties, a failure to document the analytical process or follow standardized procedures, and the existence of observe bias represent some of the concerns that have lead to the exclusion or limitation of forensic identification evidence. Analysis of these reasons may serve to refocus forensic practitioners' testimony, resources, and research toward rectifying shortfalls in these areas.

  7. An interactive physics-based unmanned ground vehicle simulator leveraging open source gaming technology: progress in the development and application of the virtual autonomous navigation environment (VANE) desktop

    Science.gov (United States)

    Rohde, Mitchell M.; Crawford, Justin; Toschlog, Matthew; Iagnemma, Karl D.; Kewlani, Guarav; Cummins, Christopher L.; Jones, Randolph A.; Horner, David A.

    2009-05-01

    It is widely recognized that simulation is pivotal to vehicle development, whether manned or unmanned. There are few dedicated choices, however, for those wishing to perform realistic, end-to-end simulations of unmanned ground vehicles (UGVs). The Virtual Autonomous Navigation Environment (VANE), under development by US Army Engineer Research and Development Center (ERDC), provides such capabilities but utilizes a High Performance Computing (HPC) Computational Testbed (CTB) and is not intended for on-line, real-time performance. A product of the VANE HPC research is a real-time desktop simulation application under development by the authors that provides a portal into the HPC environment as well as interaction with wider-scope semi-automated force simulations (e.g. OneSAF). This VANE desktop application, dubbed the Autonomous Navigation Virtual Environment Laboratory (ANVEL), enables analysis and testing of autonomous vehicle dynamics and terrain/obstacle interaction in real-time with the capability to interact within the HPC constructive geo-environmental CTB for high fidelity sensor evaluations. ANVEL leverages rigorous physics-based vehicle and vehicle-terrain interaction models in conjunction with high-quality, multimedia visualization techniques to form an intuitive, accurate engineering tool. The system provides an adaptable and customizable simulation platform that allows developers a controlled, repeatable testbed for advanced simulations. ANVEL leverages several key technologies not common to traditional engineering simulators, including techniques from the commercial video-game industry. These enable ANVEL to run on inexpensive commercial, off-the-shelf (COTS) hardware. In this paper, the authors describe key aspects of ANVEL and its development, as well as several initial applications of the system.

  8. Identification of safety-critical events using kinematic vehicle data and the discrete fourier transform.

    Science.gov (United States)

    Kluger, Robert; Smith, Brian L; Park, Hyungjun; Dailey, Daniel J

    2016-11-01

    Recent technological advances have made it both feasible and practical to identify unsafe driving behaviors using second-by-second trajectory data. Presented in this paper is a unique approach to detecting safety-critical events using vehicles' longitudinal accelerations. A Discrete Fourier Transform is used in combination with K-means clustering to flag patterns in the vehicles' accelerations in time-series that are likely to be crashes or near-crashes. The algorithm was able to detect roughly 78% of crasjavascript:void(0)hes and near-crashes (71 out of 91 validated events in the Naturalistic Driving Study data used), while generating about 1 false positive every 2.7h. In addition to presenting the promising results, an implementation strategy is discussed and further research topics that can improve this method are suggested in the paper.

  9. Motion Predicting of Autonomous Tracked Vehicles with Online Slip Model Identification

    Directory of Open Access Journals (Sweden)

    Hao Lu

    2016-01-01

    Full Text Available Precise understanding of the mobility is essential for high performance autonomous tracked vehicles in challenging circumstances, though the complex track/terrain interaction is difficult to model. A slip model based on the instantaneous centers of rotation (ICRs of treads is presented and identified to predict the motion of the vehicle in a short term. Unlike many research studies estimating current ICRs locations using velocity measurements for feedback controllers, we focus on predicting the forward trajectories by estimating ICRs locations using position measurements. ICRs locations are parameterized over both tracks rolling speeds and the kinematic parameters are estimated in real time using an extended Kalman filter (EKF without requiring prior knowledge of terrain parameters. Simulation results verify that the proposed algorithm performs better than the traditional method when the pose measuring frequencies are low. Experiments are conducted on a tracked vehicle with a weight of 13.6 tons. Results demonstrate that the predicted position and heading errors are reduced by about 75% and the reduction of pose errors is over 24% in the absence of the real-time kinematic global positioning system (RTK GPS.

  10. Methods for measurements of energy and emissions related to motor vehicles: Identification of needs for improvements

    Energy Technology Data Exchange (ETDEWEB)

    Karl-Erik Egebaeck, K.E. [Luleaa Univ. of Technology, Luleaa (Sweden). Dept. of Environmental Technology; Karlsson, Hua L. [MTC AB, Haninge (Sweden); Westerholm, R. [Stockholm Univ. (Sweden). Dept. of Analytical Chemistry

    2002-01-01

    The official methods in use today for emission testing of vehicles and engines were primarily developed for the characterisation of exhaust emissions from motor vehicles fuelled with petrol or diesel oil. The setting of new lower emission standards will make it difficult to obtain sufficient accuracy, using the present systems, for the quantification of exhaust emissions in the future. Development of new emission control technology and improved fuels has made it possible to meet these more stringent standards. Consequently new emission standards will lead to a need for new and improved methodologies and new instrumentation for the characterisation of the emissions from vehicles/engines/fuels. The present report comprises a discussion and comments on questions related to improved methods for emission measurements. The report is based on a study of the literature, site visits to laboratories and research institutes etc in the US and a meeting with representatives of the EU Commission, carried out during the spring of 2001. The conclusions and recommendations in the pre-study report are summarised in sub titles: General, regulated emissions, unregulated emissions, greenhouse gases and fuel consumption. Since the questions and problems discussed have an international connection they should be discussed in an international forum. However, before such discussions can be organised the problems related to measurement of emissions and fuel consumption must be more extensively studied than in this pre-study.

  11. Ground Clutter Reduction from GPR Data for Identification of Shallowly Buried Landmines

    Science.gov (United States)

    Nishimoto, Masahiko; Jandieri, Vakhtang

    A method for reducing ground clutter contribution from ground penetrating radar (GPR) data is proposed for discrimination of landmines located in shallow depth. The algorithm of this method is based on the Matching Pursuit (MP) that is a technique for non-orthogonal signal decomposition using dictionary of functions. As the dictionary of function, a wave-based dictionary constructed by taking account of scattering mechanisms of electromagnetic (EM) wave by rough surfaces is employed. Through numerical simulations, performance of ground clutter reduction is evaluated. The results show that the proposed method has good performance and is effective for GPR data preprocessing for discrimination of shallowly buried landmines.

  12. Molecular species identification of Central European ground beetles (Coleoptera: Carabidae using nuclear rDNA expansion segments and DNA barcodes

    Directory of Open Access Journals (Sweden)

    Raupach Michael J

    2010-09-01

    Full Text Available Abstract Background The identification of vast numbers of unknown organisms using DNA sequences becomes more and more important in ecological and biodiversity studies. In this context, a fragment of the mitochondrial cytochrome c oxidase I (COI gene has been proposed as standard DNA barcoding marker for the identification of organisms. Limitations of the COI barcoding approach can arise from its single-locus identification system, the effect of introgression events, incomplete lineage sorting, numts, heteroplasmy and maternal inheritance of intracellular endosymbionts. Consequently, the analysis of a supplementary nuclear marker system could be advantageous. Results We tested the effectiveness of the COI barcoding region and of three nuclear ribosomal expansion segments in discriminating ground beetles of Central Europe, a diverse and well-studied invertebrate taxon. As nuclear markers we determined the 18S rDNA: V4, 18S rDNA: V7 and 28S rDNA: D3 expansion segments for 344 specimens of 75 species. Seventy-three species (97% of the analysed species could be accurately identified using COI, while the combined approach of all three nuclear markers provided resolution among 71 (95% of the studied Carabidae. Conclusion Our results confirm that the analysed nuclear ribosomal expansion segments in combination constitute a valuable and efficient supplement for classical DNA barcoding to avoid potential pitfalls when only mitochondrial data are being used. We also demonstrate the high potential of COI barcodes for the identification of even closely related carabid species.

  13. System identification of a small low-cost unmanned aerial vehicle using flight data from low-cost sensors

    Science.gov (United States)

    Hoffer, Nathan Von

    Remote sensing has traditionally been done with satellites and manned aircraft. While. these methods can yield useful scientificc data, satellites and manned aircraft have limitations in data frequency, process time, and real time re-tasking. Small low-cost unmanned aerial vehicles (UAVs) provide greater possibilities for personal scientic research than traditional remote sensing platforms. Precision aerial data requires an accurate vehicle dynamics model for controller development, robust flight characteristics, and fault tolerance. One method of developing a model is system identification (system ID). In this thesis system ID of a small low-cost fixed-wing T-tail UAV is conducted. The linerized longitudinal equations of motion are derived from first principles. Foundations of Recursive Least Squares (RLS) are presented along with RLS with an Error Filtering Online Learning scheme (EFOL). Sensors, data collection, data consistency checking, and data processing are described. Batch least squares (BLS) and BLS with EFOL are used to identify aerodynamic coecoefficients of the UAV. Results of these two methods with flight data are discussed.

  14. A novel methodology for non-linear system identification of battery cells used in non-road hybrid electric vehicles

    Science.gov (United States)

    Unger, Johannes; Hametner, Christoph; Jakubek, Stefan; Quasthoff, Marcus

    2014-12-01

    An accurate state of charge (SoC) estimation of a traction battery in hybrid electric non-road vehicles, which possess higher dynamics and power densities than on-road vehicles, requires a precise battery cell terminal voltage model. This paper presents a novel methodology for non-linear system identification of battery cells to obtain precise battery models. The methodology comprises the architecture of local model networks (LMN) and optimal model based design of experiments (DoE). Three main novelties are proposed: 1) Optimal model based DoE, which aims to high dynamically excite the battery cells at load ranges frequently used in operation. 2) The integration of corresponding inputs in the LMN to regard the non-linearities SoC, relaxation, hysteresis as well as temperature effects. 3) Enhancements to the local linear model tree (LOLIMOT) construction algorithm, to achieve a physical appropriate interpretation of the LMN. The framework is applicable for different battery cell chemistries and different temperatures, and is real time capable, which is shown on an industrial PC. The accuracy of the obtained non-linear battery model is demonstrated on cells with different chemistries and temperatures. The results show significant improvement due to optimal experiment design and integration of the battery non-linearities within the LMN structure.

  15. Strontium isotopic identification of water-rock interaction and ground water mixing.

    Science.gov (United States)

    Frost, Carol D; Toner, Rachel N

    2004-01-01

    87Sr/86Sr ratios of ground waters in the Bighorn and Laramie basins' carbonate and carbonate-cemented aquifer systems, Wyoming, United States, reflect the distinctive strontium isotope signatures of the minerals in their respective aquifers. Well water samples from the Madison Aquifer (Bighorn Basin) have strontium isotopic ratios that match their carbonate host rocks. Casper Aquifer ground waters (Laramie Basin) have strontium isotopic ratios that differ from the bulk host rock; however, stepwise leaching of Casper Sandstone indicates that most of the strontium in Casper Aquifer ground waters is acquired from preferential dissolution of carbonate cement. Strontium isotope data from both Bighorn and Laramie basins, along with dye tracing experiments in the Bighorn Basin and tritium data from the Laramie Basin, suggest that waters in carbonate or carbonate-cemented aquifers acquire their strontium isotope composition very quickly--on the order of decades. Strontium isotopes were also used successfully to verify previously identified mixed Redbeds-Casper ground waters in the Laramie Basin. The strontium isotopic compositions of ground waters near Precambrian outcrops also suggest previously unrecognized mixing between Casper and Precambrian aquifers. These results demonstrate the utility of strontium isotopic ratio data in identifying ground water sources and aquifer interactions.

  16. Identification of septic system effluent in ground water using small catchment hydrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Foster, M.B.J.; Alexander, E.C. Jr. (Univ. of Minnesota, Minneapolis, MN (United States). Dept. of Geology and Geophysics)

    1992-01-01

    In many areas the contribution of septic system effluent to ground water contamination is still uncertain because of ambiguous provenance of chemical constituents. The problem is to establish a diagnostic chemical signature for the septic system effluent. Chlorides, nitrogen isotopes and optical brighteners have all been used as single constituent tracers for this purpose. These tracers tend to have limited range of application and cannot resolve ambiguity in areas with multiple potential contaminant sources. The authors addressed this problem using eight major ions to characterize the ground water chemistry, graphically or statistically. They identify the chemical signatures of septic system effluent and other non-point source contamination from the ground water chemistry of small ground water catchments overlain by single or very restricted land use types. They studied five small catchments near Rochester, Minnesota to isolate pre-development and non-septic system components of the ground water chemistry. Five small isolated hills were selected each with a distinct land-use type; natural forest, agricultural, unsewered residential, mixed agricultural/residential and fully sewered residential. The results show that Piper diagrams and statistical analysis can be used to define chemical signatures for the unsewered residential area using septic systems, the natural forest, and the agricultural catchments. The signatures of the mixed agriculture/residential and the fully sewered catchments are very similar to that of the agricultural catchment.

  17. Identification of gas powered motor propulsion group for small unmanned aerial vehicles

    Science.gov (United States)

    Oldziej, Daniel; Walendziuk, Wojciech; Mirek, Karol

    2016-09-01

    The present work aims at the dynamics identification of gas powered motor propulsion applied in remotely piloted aircraft (RPA) of the small or medium class. In subsequent chapters, the criteria indicating the choice of an electric or a gas power system are described. Moreover, the classification and characteristics of gas powered motor propulsions are presented. The main body of the article contains a laboratory stand dedicated to test the fumes from the motor propulsions in order to measure their static and dynamic characteristics. A wireless solution of acquiring the measurement data from the laboratory stand reflecting real working conditions of the repulsion is suggested. In further parts, the dynamics identification is done, and the transfer function of the object is presented.

  18. Maglev vehicles and superconductor technology: Integration of high-speed ground transportation into the air travel system

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, L.R.; Rote, D.M.; Hull, J.R.; Coffey, H.T.; Daley, J.G.; Giese, R.F.

    1989-04-01

    This study was undertaken to (1) evaluate the potential contribution of high-temperature superconductors (HTSCs) to the technical and economic feasibility of magnetically levitated (maglev) vehicles, (2) determine the status of maglev transportation research in the United States and abroad, (3) identify the likelihood of a significant transportation market for high-speed maglev vehicles, and (4) provide a preliminary assessment of the potential energy and economic benefits of maglev systems. HTSCs should be considered as an enhancing, rather than an enabling, development for maglev transportation because they should improve reliability and reduce energy and maintenance costs. Superconducting maglev transportation technologies were developed in the United States in the late 1960s and early 1970s. Federal support was withdrawn in 1975, but major maglev transportation programs were continued in Japan and West Germany, where full-scale prototypes now carry passengers at speeds of 250 mi/h in demonstration runs. Maglev systems are generally viewed as very-high-speed train systems, but this study shows that the potential market for maglev technology as a train system, e.g., from one downtown to another, is limited. Rather, aircraft and maglev vehicles should be seen as complementing rather than competing transportation systems. If maglev systems were integrated into major hub airport operations, they could become economical in many relatively high-density US corridors. Air traffic congestion and associated noise and pollutant emissions around airports would also be reduced. 68 refs., 26 figs., 16 tabs.

  19. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles – Part 2: First results from balloon and unmanned aerial vehicle flights

    Directory of Open Access Journals (Sweden)

    J.-B. Renard

    2015-09-01

    Full Text Available In the companion paper (Renard et al., 2015, we have described and evaluated a new versatile optical particle counter/sizer named LOAC (Light Optical Aerosol Counter based on scattering measurements at angles of 12 and 60° that allows some topology identification of particles (droplets, carbonaceous, salts, and mineral dust in addition to size segregated counting in a large diameter range from 0.2 up to possibly more than 100 μm depending on sampling conditions. Its capabilities overpass those of preceding optical particle counters (OPCs allowing the characterization of all kind of aerosols from submicronic-sized absorbing carbonaceous particles in polluted air to very coarse particles (> 10–20 μm in diameter in desert dust plumes or fog and clouds. LOAC's light and compact design allows measurements under all kinds of balloons, on-board unmanned aerial vehicles (UAV and at ground level. We illustrate here the first LOAC airborne results obtained from an unmanned aerial vehicle (UAV and a variety of scientific balloons. The UAV was deployed in a peri-urban environment near Bordeaux in France. Balloon operations include (i tethered balloons deployed in urban environments in Vienna (Austria and Paris (France, (ii pressurized balloons drifting in the lower troposphere over the western Mediterranean (during the Chemistry-Aerosol Mediterranean Experiment – ChArMEx campaigns, (iii meteorological sounding balloons launched in the western Mediterranean region (ChArMEx and from Aire-sur-l'Adour in south-western France (VOLTAIRE-LOAC campaign. More focus is put on measurements performed in the Mediterranean during (ChArMEx and especially during African dust transport events to illustrate the original capability of balloon-borne LOAC to monitor in situ coarse mineral dust particles. In particular, LOAC has detected unexpected large particles in desert sand plumes.

  20. Online Identification of Power Required for Self-Sustainability of the Battery in Hybrid Electric Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Malikopoulos, Andreas [ORNL

    2014-01-01

    Hybrid electric vehicles have shown great potential for enhancing fuel economy and reducing emissions. Deriving a power management control policy to distribute the power demanded by the driver optimally to the available subsystems (e.g., the internal combustion engine, motor, generator, and battery) has been a challenging control problem. One of the main aspects of the power management control algorithms is concerned with the self-sustainability of the electrical path, which must be guaranteed for the entire driving cycle. This paper considers the problem of identifying online the power required by the battery to maintain the state of charge within a range of the target value. An algorithm is presented that realizes how much power the engine needs to provide to the battery so that self-sustainability of the electrical path is maintained.

  1. The Electric Vehicles Ecosystem Model: Construct, Analysis and Identification of Key Challenges

    Directory of Open Access Journals (Sweden)

    Zulkarnain

    2014-09-01

    Full Text Available This paper builds a conceptual model of electric vehicles’ (EV ecosystem and value chain build-up. Based on the literature, the research distinguishes the most critical challenges that are on the way of mobility systems’ electrification. Consumers still have some questions that call for answers before they are ready to adopt evs.With regard to technical aspects, some challenges are coming from vehicles, charging infrastructure, battery technology, and standardization. The use of battery in EVs will bring in additional environmental challenges, coming from the battery life cycle for used battery, the manufacturing, and from some materials used and treated in the manufacturing process. The policy aspects include mostly taxation strategies. For most part, established market conditions are still lacking and there are a number of unresolved challenges on both supply and demand side of the EV market.

  2. Identification of acceleration pulses in near-fault ground motion using the EMD method

    Institute of Scientific and Technical Information of China (English)

    Zhang Yushan; Hu Yuxian; Zhao Fengxin; Liang Jianwen; Yang Caihong

    2005-01-01

    In this paper, response spectral characteristics of one-, two-, and three-lobe sinusoidal acceleration pulses are investigated, and some of their basic properties are derived. Furthermore, the empirical mode decomposition (EMD) method is utilized as an adaptive filter to decompose the near-fault pulse-like ground motions, which were recorded during the September 20, 1999, Chi-Chi earthquake. These ground motions contain distinct velocity pulses, and were decomposed into high-frequency (HF) and low-frequency (LF) components, from which the corresponding HF acceleration pulse (if existing)and LF acceleration pulse could be easily identified and detected. Finally, the identified acceleration pulses are modeled by simplified sinusoidal approximations, whose dynamic behaviors are compared to those of the original acceleration pulses as well as to those of the original HF and LF acceleration components in the context of elastic response spectra. It was demonstrated that it is just the acceleration pulses contained in the near-fault pulse-like ground motion that fundamentally dominate the special impulsive dynamic behaviors of such motion in an engineering sense. The motion thus has a greater potential to cause severe damage than the far-field ground motions, i.e. they impose high base shear demands on engineering structures as well as placing very high deformation demands on long-period structures.

  3. Reduced Order Modeling for Rapid Simulation of Blast Events of a Military Ground Vehicle and Its Occupants

    Science.gov (United States)

    2014-08-12

    event, 0-100ms (blastoff), 800-1000ms (slam-down) Prescribed accelerative vertical motion / PSM Prescribed structural motion was used to model the...motion ( PSM ) file to be input to MADYMO. The deformation of the hull floor in MADYMO is shown in Figure 19. PSM captures the deformation of the...structure in the model, but it does not allow the deformed parts of the model to move with the rest of the vehicle. In other words, the PSM method when

  4. Arctic ecosystem functional zones: identification and quantification using an above and below ground monitoring strategy

    Science.gov (United States)

    Hubbard, Susan S.; Ajo-Franklin, Jonathan B.; Dafflon, Baptiste; Dou, Shan; Kneafsey, Tim J.; Peterson, John E.; Tas, Neslihan; Torn, Margaret S.; Phuong Tran, Anh; Ulrich, Craig; Wainwright, Haruko; Wu, Yuxin; Wullschleger, Stan

    2015-04-01

    Although accurate prediction of ecosystem feedbacks to climate requires characterization of the properties that influence terrestrial carbon cycling, performing such characterization is challenging due to the disparity of scales involved. This is particularly true in vulnerable Arctic ecosystems, where microbial activities leading to the production of greenhouse gasses are a function of small-scale hydrological, geochemical, and thermal conditions influenced by geomorphology and seasonal dynamics. As part of the DOE Next-Generation Ecosystem Experiment (NGEE-Arctic), we are advancing two approaches to improve the characterization of complex Arctic ecosystems, with an initial application to an ice-wedge polygon dominated tundra site near Barrow, AK, USA. The first advance focuses on developing a new strategy to jointly monitor above- and below- ground properties critical for carbon cycling in the tundra. The strategy includes co-characterization of properties within the three critical ecosystem compartments: land surface (vegetation, water inundation, snow thickness, and geomorphology); active layer (peat thickness, soil moisture, soil texture, hydraulic conductivity, soil temperature, and geochemistry); and permafrost (mineral soil and ice content, nature, and distribution). Using a nested sampling strategy, a wide range of measurements have been collected at the study site over the past three years, including: above-ground imagery (LiDAR, visible, near infrared, NDVI) from various platforms, surface geophysical datasets (electrical, electromagnetic, ground penetrating radar, seismic), and point measurements (such as CO2 and methane fluxes, soil properties, microbial community composition). A subset of the coincident datasets is autonomously collected daily. Laboratory experiments and new inversion approaches are used to improve interpretation of the field geophysical datasets in terms of ecosystem properties. The new strategy has significantly advanced our ability

  5. Thruster fault identification method for autonomous underwater vehicle using peak region energy and least square grey relational grade

    Directory of Open Access Journals (Sweden)

    Mingjun Zhang

    2015-12-01

    Full Text Available A novel thruster fault identification method for autonomous underwater vehicle is presented in this article. It uses the proposed peak region energy method to extract fault feature and uses the proposed least square grey relational grade method to estimate fault degree. The peak region energy method is developed from fusion feature modulus maximum method. It applies the fusion feature modulus maximum method to get fusion feature and then regards the maximum of peak region energy in the convolution operation results of fusion feature as fault feature. The least square grey relational grade method is developed from grey relational analysis algorithm. It determines the fault degree interval by the grey relational analysis algorithm and then estimates fault degree in the interval by least square algorithm. Pool experiments of the experimental prototype are conducted to verify the effectiveness of the proposed methods. The experimental results show that the fault feature extracted by the peak region energy method is monotonic to fault degree while the one extracted by the fusion feature modulus maximum method is not. The least square grey relational grade method can further get an estimation result between adjacent standard fault degrees while the estimation result of the grey relational analysis algorithm is just one of the standard fault degrees.

  6. Effects of image orientation and ground control points distribution on unmanned aerial vehicle photogrammetry projects on a road cut slope

    Science.gov (United States)

    Carvajal-Ramírez, Fernando; Agüera-Vega, Francisco; Martínez-Carricondo, Patricio J.

    2016-07-01

    The morphology of road cut slopes, such as length and high slopes, is one of the most prevalent causes of landslides and terrain stability troubles. Digital elevation models (DEMs) and orthoimages are used for land management purposes. Two flights with different orientations with respect to the target surface were planned, and four photogrammetric projects were carried out during these flights to study the image orientation effects. Orthogonal images oriented to the cut slope with only sidelaps were compared to the classical vertical orientation, with sidelapping, endlapping, and both types of overlapping simultaneously. DEM and orthoimages obtained from the orthogonal project showed smaller errors than those obtained from the other three photogrammetric projects, with the first one being much easier to manage. One additional flight and six photogrammetric projects were used to establish an objective criterion to locate the three ground control points for georeferencing and rectification DEMs and orthoimages. All possible sources of errors were evaluated in the DEMs and orthoimages.

  7. Multiple Views on Safety-Critical Automation: Aircraft, Autonomous Vehicles, Air Traffic Management and Satellite Ground Segments Perspectives

    Science.gov (United States)

    Feary, Michael S.; Palanque, Philippe Andre Rolan; Martinie, De Almeida; Tscheligi, Manfred

    2016-01-01

    This SIG focuses on the engineering of automation in interactive critical systems. Automation has already been studied in a number of (sub-) disciplines and application fields: design, human factors, psychology, (software) engineering, aviation, health care, games. One distinguishing feature of the area we are focusing on is that in the field of interactive critical systems properties such as reliability, dependability, fault-tolerance are as important as usability, user experience or overall acceptance issues. The SIG targets at two problem areas: first the engineering of the user interaction with (partly-) autonomous systems: how to design, build and assess autonomous behavior, especially in cases where there is a need to represent on the user interface both autonomous and interactive objects. An example of such integration is the representation of an unmanned aerial vehicle (UAV) (where no direct interaction is possible), together with aircrafts (that have to be instructed by an air traffic controller to avoid the UAV). Second the design and engineering of user interaction in general for autonomous objects systems (for example a cruise control in a car or an autopilot in an aircraft). The goal of the SIG is to raise interest in the CHI community on the general aspects of automation and to identify a community of researchers and practitioners interested in those increasingly prominent issues of interfaces towards (semi)-autonomous systems. The expected audience should be interested in addressing the issues of integration of mainly unconnected research domains to formulate a new joint research agenda.

  8. SIG: Multiple Views on Safety-Critical Automation: Aircraft, Autonomous Vehicles, Air Traffic Management and Satellite Ground Segments Perspectives

    Science.gov (United States)

    Feary, Michael; Palanque, Philippe; Martinie, Célia; Tscheligi, Manfred

    2016-01-01

    This SIG focuses on the engineering of automation in interactive critical systems. Automation has already been studied in a number of (sub-) disciplines and application fields: design, human factors, psychology, (software) engineering, aviation, health care, games. One distinguishing feature of the area we are focusing on is that in the field of interactive critical systems properties such as reliability, dependability, fault tolerance are as important as usability, user experience or overall acceptance issues. The SIG targets at two problem areas: first the engineering of the user interaction with (partly-) autonomous systems: how to design, build and assess autonomous behavior, especially in cases where there is a need to represent on the user interface both autonomous and interactive objects. An example of such integration is the representation of an unmanned aerial vehicle (UAV) (where no direct interaction is possible), together with aircrafts (that have to be instructed by an air traffic controller to avoid the UAV). Second the design and engineering of user interaction in general for autonomous objects/systems (for example a cruise control in a car or an autopilot in an aircraft). The goal of the SIG is to raise interest in the CHI community on the general aspects of automation and to identify a community of researchers and practitioners interested in those increasingly prominent issues of interfaces towards (semi)-autonomous systems. The expected audience should be interested in addressing the issues of integration of mainly unconnected research domains to formulate a new joint research agenda.

  9. Comparison of real-time performance of Kalman filter-based slam methods for unmanned ground vehicle (UGV) navigation

    Science.gov (United States)

    Temeltaş, Hakan; Kavak, Deniz

    2009-05-01

    Simultaneous Localization and Mapping (SLAM) using for the mobile robot navigation has two main problems. First problem is the computational complexity due to the growing state vector with the added landmark in the environment. Second problem is data association which matches the observations and landmarks in the state vector. In this study, we compare Extended Kalman Filter (EKF) based SLAM which is well-developed and well-known algorithm, and Compressed Extended Kalman Filter (CEKF) based SLAM developed for decreasing of the computational complexity of the EKF based SLAM. We write two simulation program to investigate these techniques. Firts program is written for the comparison of EKF and CEKF based SLAM according to the computational complexity and covariance matrix error with the different numbers of landmarks. In the second program, EKF and CEKF based SLAM simulations are presented. For this simulation differential drive vehicle that moves in a 10m square trajectory and LMS 200 2-D laser range finder are modelled and landmarks are randomly scattered in that 10m square environment.

  10. Flight Test Result for the Ground-Based Radio Navigation System Sensor with an Unmanned Air Vehicle.

    Science.gov (United States)

    Jang, Jaegyu; Ahn, Woo-Guen; Seo, Seungwoo; Lee, Jang Yong; Park, Jun-Pyo

    2015-11-11

    The Ground-based Radio Navigation System (GRNS) is an alternative/backup navigation system based on time synchronized pseudolites. It has been studied for some years due to the potential vulnerability issue of satellite navigation systems (e.g., GPS or Galileo). In the framework of our study, a periodic pulsed sequence was used instead of the randomized pulse sequence recommended as the RTCM (radio technical commission for maritime services) SC (special committee)-104 pseudolite signal, as a randomized pulse sequence with a long dwell time is not suitable for applications requiring high dynamics. This paper introduces a mathematical model of the post-correlation output in a navigation sensor, showing that the aliasing caused by the additional frequency term of a periodic pulsed signal leads to a false lock (i.e., Doppler frequency bias) during the signal acquisition process or in the carrier tracking loop of the navigation sensor. We suggest algorithms to resolve the frequency false lock issue in this paper, relying on the use of a multi-correlator. A flight test with an unmanned helicopter was conducted to verify the implemented navigation sensor. The results of this analysis show that there were no false locks during the flight test and that outliers stem from bad dilution of precision (DOP) or fluctuations in the received signal quality.

  11. Flight Test Result for the Ground-Based Radio Navigation System Sensor with an Unmanned Air Vehicle

    Directory of Open Access Journals (Sweden)

    Jaegyu Jang

    2015-11-01

    Full Text Available The Ground-based Radio Navigation System (GRNS is an alternative/backup navigation system based on time synchronized pseudolites. It has been studied for some years due to the potential vulnerability issue of satellite navigation systems (e.g., GPS or Galileo. In the framework of our study, a periodic pulsed sequence was used instead of the randomized pulse sequence recommended as the RTCM (radio technical commission for maritime services SC (special committee-104 pseudolite signal, as a randomized pulse sequence with a long dwell time is not suitable for applications requiring high dynamics. This paper introduces a mathematical model of the post-correlation output in a navigation sensor, showing that the aliasing caused by the additional frequency term of a periodic pulsed signal leads to a false lock (i.e., Doppler frequency bias during the signal acquisition process or in the carrier tracking loop of the navigation sensor. We suggest algorithms to resolve the frequency false lock issue in this paper, relying on the use of a multi-correlator. A flight test with an unmanned helicopter was conducted to verify the implemented navigation sensor. The results of this analysis show that there were no false locks during the flight test and that outliers stem from bad dilution of precision (DOP or fluctuations in the received signal quality.

  12. Intercomparison of Unmanned Aerial Vehicle and Ground-Based Narrow Band Spectrometers Applied to Crop Trait Monitoring in Organic Potato Production.

    Science.gov (United States)

    Domingues Franceschini, Marston Héracles; Bartholomeus, Harm; van Apeldoorn, Dirk; Suomalainen, Juha; Kooistra, Lammert

    2017-06-18

    Vegetation properties can be estimated using optical sensors, acquiring data on board of different platforms. For instance, ground-based and Unmanned Aerial Vehicle (UAV)-borne spectrometers can measure reflectance in narrow spectral bands, while different modelling approaches, like regressions fitted to vegetation indices, can relate spectra with crop traits. Although monitoring frameworks using multiple sensors can be more flexible, they may result in higher inaccuracy due to differences related to the sensors characteristics, which can affect information sampling. Also organic production systems can benefit from continuous monitoring focusing on crop management and stress detection, but few studies have evaluated applications with this objective. In this study, ground-based and UAV spectrometers were compared in the context of organic potato cultivation. Relatively accurate estimates were obtained for leaf chlorophyll (RMSE = 6.07 µg·cm(-2)), leaf area index (RMSE = 0.67 m²·m(-2)), canopy chlorophyll (RMSE = 0.24 g·m(-2)) and ground cover (RMSE = 5.5%) using five UAV-based data acquisitions, from 43 to 99 days after planting. These retrievals are slightly better than those derived from ground-based measurements (RMSE = 7.25 µg·cm(-2), 0.85 m²·m(-2), 0.28 g·m(-2) and 6.8%, respectively), for the same period. Excluding observations corresponding to the first acquisition increased retrieval accuracy and made outputs more comparable between sensors, due to relatively low vegetation cover on this date. Intercomparison of vegetation indices indicated that indices based on the contrast between spectral bands in the visible and near-infrared, like OSAVI, MCARI2 and CIg provided, at certain extent, robust outputs that could be transferred between sensors. Information sampling at plot level by both sensing solutions resulted in comparable discriminative potential concerning advanced stages of late blight incidence. These results indicate that optical sensors

  13. The Apache Longbow-Hellfire Missile Test at Yuma Proving Ground: Ecological Risk Assessment for Tracked Vehicle Movement across Desert Pavement

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Mark J [ORNL; Efroymson, Rebecca Ann [ORNL; Hargrove, William Walter [ORNL

    2008-01-01

    A multiple stressor risk assessment was conducted at Yuma Proving Ground, Arizona, as a demonstration of the Military Ecological Risk Assessment Framework. The focus was a testing program at Cibola Range, which involved an Apache Longbow helicopter firing Hellfire missiles at moving targets, M60-A1 tanks. This paper describes the ecological risk assessment for the tracked vehicle movement component of the testing program. The principal stressor associated with tracked vehicle movement was soil disturbance, and a resulting, secondary stressor was hydrological change. Water loss to washes and wash vegetation was expected to result from increased infiltration and/or evaporation associated with disturbances to desert pavement. The simulated exposure of wash vegetation to water loss was quantified using estimates of exposed land area from a digital ortho quarter quad aerial photo and field observations, a 30 30 m digital elevation model, the flow accumulation feature of ESRI ArcInfo, and a two-step process in which runoff was estimated from direct precipitation to a land area and from water that flowed from upgradient to a land area. In all simulated scenarios, absolute water loss decreased with distance from the disturbance, downgradient in the washes; however, percentage water loss was greatest in land areas immediately downgradient of a disturbance. Potential effects on growth and survival of wash trees were quantified by using an empirical relationship derived from a local unpublished study of water infiltration rates. The risk characterization concluded that neither risk to wash vegetation growth or survival nor risk to mule deer abundance and reproduction was expected. The risk characterization was negative for both the incremental risk of the test program and the combination of the test and pretest disturbances.

  14. 考虑桥路面粗糙度的移动体参数识别%Parameter identification of moving vehicles considering road roughness of bridge

    Institute of Scientific and Technical Information of China (English)

    张青霞; 段忠东; Lukasz Jankowski

    2012-01-01

    基于虚拟变形(VDM)方法中移动动态影响矩阵的概念,利用双自由度质量-弹簧阻尼模型模拟移动车辆,系统推导和阐述了车-桥耦合系统中粗糙路面上移动体参数的识别方法.以移动体参数的修正因子为优化变量,通过最小化桥体结构实测响应和计算响应的平方距离进行识别,识别精度高,对噪声鲁棒性强,且较少的传感器就能识别多个移动体参数.利用移动动态影响矩阵,每步优化中无需时时重构系统参数矩阵,计算效率高.利用一个三跨连续梁模型验证该方法的有效性,在5%的噪声影响下,利用一个传感器可以准确地识别多个移动体参数和移动荷载.此外,通过比较平坦路面与粗糙路面上的移动体参数的识别方法和结果,结合车体参数的灵敏度分析,说明了路面粗糙度、移动体参数对结构响应的影响及不同情况下参数识别中优化变量的选取原则.%Using the concept of dynamic moving influence matrix in VDM, a moving vehicle identification method in vehicle-bridge coupled system is derived and elaborated. And for which the road roughness is considered. The vehicle is simulated by a two degree of freedoms mass-spring vehicle model. In this method , vehicle parameters are taken as the variables and then optimized by minimizing the square distance between the measured responses of the bridge and its estimated responses with high identification accuracy. The method is robust to noise and moreover requires fewer sensors than that needed in moving loads identification methods. During the optimization, the repetitive construction of the variant system matrix can be avoided by the utilization of the dynamic moving influence matrix and thus the optimization efficiency is high. A numerical example of a three-span beam with rough surface is used to verify the proposed method, in which the multiple vehicle parameters and moving forces can be identified successfully by one

  15. 汽车经济性驾驶技术及应用概述%Overview of ecological driving technology and application for ground vehicles

    Institute of Scientific and Technical Information of China (English)

    李升波; 徐少兵; 王文军; 成波

    2014-01-01

    The ecological driving technology of ground vehicles is critical for energy-sustainable road transportation. This technology, centered on the optimization and the coordination of driver, vehicle, road infrastructure and trafifc lfow, aims to reduce the fuel consumption of vehicles in travel ing by reshaping drivers’ habits, assisting driving manipulation and implementing vehicular automation, etc. This paper summarizes the key aspects of vehicular eco-driving technology, including its history, the state of arts and the theoretical chal enges. Two major identiifcation methods of the eco-driving strategies are reviewed, i.e. the experiment based method and the optimization based method. The applications can be classiifed into the eco-driving education, the eco-driving assistance, and the eco-vehicular automation. The ifrst item is easy to be implemented and suitable for government promotion;the second item has most promising market prospect;and the last item wil become proper carrier for eco-driving technology with the popularity of vehicular automation.%汽车经济性驾驶是道路交通节能减排的重要方向。该技术以驾驶人与车辆/道路/交通流的优化与协调为核心,通过重塑驾驶员习惯、辅助驾驶员操作以及车辆自动化控制等手段,满足出行需求的同时降低行驶过程的油耗。该文综述了汽车经济性驾驶技术的发展历史、技术现状与理论难点;介绍了节油驾驶策略的实验型和理论型辨识方法。其应用可分为3类:易于实施、适合政府层面推动的驾驶员教育;最具产品化前景、值得业界关注的节油驾驶辅助;将是经济性驾驶技术的理想载体的自动驾驶。

  16. 基于脉冲神经网络模型的车辆车型识别%Identification of Vehicle Types Based on Spiking Neural Network Model

    Institute of Scientific and Technical Information of China (English)

    陈浩; 吴庆祥; 王颖; 林梅燕; 蔡荣太

    2011-01-01

    准确提取各种运动目标的特征并将它们加以分类识别,是近年来图像处理和人工智能研究中的热点之一.针对识别运动车辆车型需求,提出了在利用脉冲神经网络模型对运动车辆进行边缘提取的基础上提取运动目标的不变线矩特征,再用这些特征训练神经网络对车型进行识别的方法.试验结果表明该模型能准确的提取运动目标的特征,从而提高分类的效果.在今后的智能监控系统中有广阔的应用前景.%Accurate feature extraction and recognition of moving objects are the hot spots in image processing and artificial intelligence research domains.In order to identify the types of moving vehicles, this paper proposed an identification approach in which edges of the moving vehicle are extracted by a spiking neural network model.The line moment of moving vehicle is used as the features to train a neural network, and then the neural network is used to identify type of the moving vehicle.The results of the simulation show that the approach can accurately extract the features of the moving vehicles so that the accuracy of identification has been improved.This approach shows a promising prospect in the application of intelligent surveillance systems in the future.

  17. Seasonal associations and atmospheric transport distances of fungi in the genus Fusarium collected with unmanned aerial vehicles and ground-based sampling devices

    Science.gov (United States)

    Lin, Binbin; Ross, Shane D.; Prussin, Aaron J.; Schmale, David G.

    2014-09-01

    Spores of fungi in the genus Fusarium may be transported through the atmosphere over long distances. New information is needed to characterize seasonal trends in atmospheric loads of Fusarium and to pinpoint the source(s) of inoculum at both local (farm) and regional (state or country) scales. We hypothesized that (1) atmospheric concentrations of Fusarium spores in an agricultural ecosystem vary with height and season and (2) transport distances from potential inoculum source(s) vary with season. To test these hypotheses, spores of Fusarium were collected from the atmosphere in an agricultural ecosystem in Blacksburg, VA, USA using a Burkard volumetric sampler (BVS) 1 m above ground level and autonomous unmanned aerial vehicles (UAVs) 100 m above ground level. More than 2200 colony forming units (CFUs) of Fusarium were collected during 104 BVS sampling periods and 180 UAV sampling periods over four calendar years (2009-2012). Spore concentrations ranged from 0 to 13 and 0 to 23 spores m-3 for the BVS and the UAVs, respectively. Spore concentrations were generally higher in the fall, spring, and summer, and lower in the winter. Spore concentrations from the BVS were generally higher than those from the UAVs for both seasonal and hourly collections. A Gaussian plume transport model was used to estimate distances to the potential inoculum source(s) by season, and produced mean transport distances of 1.4 km for the spring, 1.7 km for the summer, 1.2 km for the fall, and 4.1 km for the winter. Environmental signatures that predict atmospheric loads of Fusarium could inform disease spread, air pollution, and climate change.

  18. Identification and description of potential ground-water quality monitoring wells in Florida

    Science.gov (United States)

    Seaber, P.R.; Thagard, M.E.

    1986-01-01

    characteristics throughout the State. The identification and description of the potential monitoring wells and the listing of the type and frequency of the groundwater quality data forms a foundation for both the network and the data base. (Author 's abstract)

  19. LOAC: a small aerosol optical counter/sizer for ground-based and balloon measurements of the size distribution and nature of atmospheric particles - Part 2: First results from balloon and unmanned aerial vehicle flights

    Science.gov (United States)

    Renard, Jean-Baptiste; Dulac, François; Berthet, Gwenaël; Lurton, Thibaut; Vignelles, Damien; Jégou, Fabrice; Tonnelier, Thierry; Jeannot, Matthieu; Couté, Benoit; Akiki, Rony; Verdier, Nicolas; Mallet, Marc; Gensdarmes, François; Charpentier, Patrick; Mesmin, Samuel; Duverger, Vincent; Dupont, Jean-Charles; Elias, Thierry; Crenn, Vincent; Sciare, Jean; Zieger, Paul; Salter, Matthew; Roberts, Tjarda; Giacomoni, Jérôme; Gobbi, Matthieu; Hamonou, Eric; Olafsson, Haraldur; Dagsson-Waldhauserova, Pavla; Camy-Peyret, Claude; Mazel, Christophe; Décamps, Thierry; Piringer, Martin; Surcin, Jérémy; Daugeron, Daniel

    2016-08-01

    In the companion (Part I) paper, we have described and evaluated a new versatile optical particle counter/sizer named LOAC (Light Optical Aerosol Counter), based on scattering measurements at angles of 12 and 60°. That allows for some typology identification of particles (droplets, carbonaceous, salts, and mineral dust) in addition to size-segregated counting in a large diameter range from 0.2 µm up to possibly more than 100 µm depending on sampling conditions (Renard et al., 2016). Its capabilities overpass those of preceding optical particle counters (OPCs) allowing the characterization of all kind of aerosols from submicronic-sized absorbing carbonaceous particles in polluted air to very coarse particles (> 10-20 µm in diameter) in desert dust plumes or fog and clouds. LOAC's light and compact design allows measurements under all kinds of balloons, on-board unmanned aerial vehicles (UAVs) and at ground level. We illustrate here the first LOAC airborne results obtained from a UAV and a variety of scientific balloons. The UAV was deployed in a peri-urban environment near Bordeaux in France. Balloon operations include (i) tethered balloons deployed in urban environments in Vienna (Austria) and Paris (France), (ii) pressurized balloons drifting in the lower troposphere over the western Mediterranean (during the Chemistry-Aerosol Mediterranean Experiment - ChArMEx campaigns), (iii) meteorological sounding balloons launched in the western Mediterranean region (ChArMEx) and from Aire-sur-l'Adour in south-western France (VOLTAIRE-LOAC campaign). More focus is put on measurements performed in the Mediterranean during (ChArMEx) and especially during African dust transport events to illustrate the original capability of balloon-borne LOAC to monitor in situ coarse mineral dust particles. In particular, LOAC has detected unexpected large particles in desert sand plumes.

  20. Successful marriage: American Panel Corporation and LG Philips LCD custom-designed avionic, shipboard, and rugged ground vehicle display modules from a consumer-oriented fabrication facility

    Science.gov (United States)

    Dunn, William; Garrett, Kimberly S.

    2001-09-01

    American panel corporation (APC) believes the use of custom designed (instead of ruggedized commercial) AMLCD cells is the only way to meet the specific environmental and performance requirements of the military/commercial avionic, shipboard and rugged ground vehicle markets. The APC/LG.Philips LCD (LG) custom approach mitigates risk to the end-user in many ways. As a part of the APC/LG long- term agreement LG has committed to provide module level equivalent (form, fit and function equivalent) panels for a period of ten years. No other commercial glass manufacturer has provided such an agreement. With the use of LG's commercial production manufacturing capabilities, APC/LG can provide the opportunity to procure a lifetime buy for any program with delivery of the entire lot within six months of order placement. This ensures that the entire production program will receive identical glass for every unit. The APC/LG relationship works where others have failed due to the number of years spent cultivating the mutual trust and respect necessary for establishing such a partnership, LG's interest in capturing the market share of this niche application, and the magnitude of the initial up-front investment by APC in engineering, tooling, facilities, production equipment, and LCD cell inventory.

  1. An outbreak of salmonella chester infection in Canada: rare serotype, uncommon exposure, and unusual population demographic facilitate rapid identification of food vehicle.

    Science.gov (United States)

    Taylor, John; Galanis, Eleni; Wilcott, Lynn; Hoang, Linda; Stone, Jason; Ekkert, Judi; Quibell, Doug; Huddleston, Mark; McCormick, Rachel; Whitfield, Yvonne; Adhikari, Bijay; Grant, Christopher C R; Sharma, Davendra

    2012-04-01

    Salmonella Chester infection has rarely been reported in the literature. In 2010, 33 case patients were reported in 2 months in four Canadian provinces. We conducted an outbreak investigation in collaboration with public health agencies, food safety specialists, regulatory agencies, grocery store chains, and the product distributor. We used case patient interviews, customer loyalty cards, and microbiological testing of clinical and food samples to identify nationally distributed head cheese as the food vehicle responsible for the outbreak. The rare serotype, a limited affected demographic group, and an uncommon exposure led to the rapid identification of the source. Control measures were implemented within 9 days of notification of the outbreak.

  2. Design of RFID electronic vehicle identification with resin slot antenna%RFID电子车牌用树脂缝隙天线的设计

    Institute of Scientific and Technical Information of China (English)

    赵文婧; 厉丹; 黄为勇; 吴双江

    2016-01-01

    为了对车辆进行射频识别(RFID),设计一种用于有源电子车牌的弯折树脂缝隙天线,并根据车牌安装的实际情况设计了馈电结构。该天线能够将有源RFID模块与金属车牌有效一体化,而且树脂缝隙不易变形,能够加强天线的机械强度。利用HFSS软件对结构参数进行仿真优化,并分析了结构参数的变化对天线工作频带特性的影响,得到设计该天线的一般规律。仿真结果表明,该树脂缝隙天线工作频段满足RFID的2.45 GHz频段范围,具有较高的增益、较远的阅读距离和车辆识别所需的多波束辐射方向图。%The buckling resin slot antenna used to active electronic vehicle identification was designed to conduct radio fre⁃quency identification(RFID)of vehicles,and its feed structure was designed according to the actual installing situation of the electronic vehicle identification. The antenna can effectively integrate the active RFID module and metal license plate. The resin slot is difficult of deformation,but can strengthen the mechanical strength of the antenna. The structure parameters are simulated and optimized by HFSS simulation software. The influences of structure parameters changing on impedance bandwidth characteris⁃tics of the antenna are analyzed to obtain the general design rule of the antenna. The simulation results show that the impedance bandwidth of the resin slot antenna can meet the RFID band range of 2.45 GHz. The antenna has high gain,far read range,and multi⁃beam radiation pattern required by vehicle identification.

  3. Single Phase-to-Ground Fault Line Identification and Section Location Method for Non-Effectively Grounded Distribution Systems Based on Signal Injection

    Institute of Scientific and Technical Information of China (English)

    PAN Zhencun; WANG Chengshan; CONG Wei; ZHANG Fan

    2008-01-01

    A diagnostic signal current trace detecting based single phase-to-ground fault line identifica- tion and section location method for non-effectively grounded distribution systems is presented in thisi oaper. A special diagnostic signal current is injected into the fault distribution system, and then it is de- tected at the outlet terminals to identify the fault line and at the sectionalizing or branching point along the fault line to locate the fault section. The method has been put into application in actual distribution network and field experience shows that it can identify the fault line and locate the fault section correctly and effectively.

  4. Hermes vehicle

    Science.gov (United States)

    Cretenet, J. C.

    1985-11-01

    The presence of Europe in the future developments of spatial programs, which are foreseen, for the 1990s and further, needs the availability of vehicles, modules and all related technologies adapted to operational use of low earth orbit station. The manned HERMES vehicle shall be part of the in-orbit infrastructure realized either in the European context or in cooperation between Europe and the United States. The main mission for this vehicle will be to run a shuttle with the station that means transport and change of the crews, its safe return in abort condition and cargo transport of consumable and experimental equipment. Secondary missions could be servicing on automatic platform, making autonomous scientific experiments. Lastly, the vehicle, by means of its on-board propulsion capability, could be used to accomplish in-orbit tow and assembly missions. Studies which are undertaken now about the vehicle are devoted to the aerodynamic shape (research of a compromise between aerothermic and overall fitting), the system (functional architecture, ground and flight configuration); further works dealing with technology are presently on hand in the field of thermal protection, aerodynamics, power generation with a high massic yield.

  5. Ground Vehicle CFD at TARDEC

    Science.gov (United States)

    2012-05-21

    or liquid+solid • Challenges • Multiphase + Lagrangian particles • Combustion (~9 reaction steps) • Initial fireball • Suppression chemistry...Iso-surface of Temperature 800K, FM200 Parcels Example: Testbed Fireball Generation - 10 Hole Showerhead FOUO • Traditional analysis evaluates a

  6. Distributed control system for vehicles

    Science.gov (United States)

    Callen, Jeffrey N.; Iaconis, John M.

    1997-01-01

    Previously, control systems for remotely controlled vehicles (RCVs) and unmanned ground vehicles (UGVs) have largely been of a centralized design, in which all vehicles sensing and servo control systems are individually interfaces to a central computer. These controllers often have been completely redeveloped for each new application. This approach leads to increased development, installation, and maintenance costs, and to a product that is not easily adaptable to other platforms or tasks. Under a Phase II SBIR program, RedZone Robotics is developing a distributed control systems (DCS) that reduces development, installation, and maintenance costs while enhancing adaptability to other platforms or applications. The DCS consists of a distributed control network of small, intelligent local controller nodes acting on the vehicle motion and sensing system components. A central card oversees the network and handles higher level commands. The central card and local nodes are linked through the controller area network serial bus. The node hardware is of standardized design so that application specific tasks are largely accomplished in software. The standardized design makes the DCS potentially compatible with multiple UGV platforms and eventual dual-use applications in commercial vehicles. More sophisticated functionality, such as remote control or autonomous navigation can be layered on top of the low level control supplied by DCS. Thus, the DCS can be an enabling component for development of advanced UGV technologies. ALso, intelligent nodes enable fault identification and orderly shutdown to be accomplished directly at the vehicle actuators. This SBIR is sponsored by the US Army Tank-Automotive Research, Development and Engineering Center.

  7. On-line identification of vehicle fuel consumption for energy and emission management: an LTP System Analysis

    NARCIS (Netherlands)

    Kessels, J.T.B.A.; Sijs, J.; Hermans, R.M.; Damen, A.A.H.; Bosch, P.P.J. van den; Papp, Z.; Lazar, M.

    2008-01-01

    Abstract—An Energy Management (EM) system traditionally relies on (quasi) static maps offering efficiency parameters of the vehicle powertrain. During a vehicle’s life span, these maps lose validity, so optimal performance for EM is not assured. This paper presents a proof-of-concept for a novel mea

  8. An optimal solution for enhancing ambulance safety: implementing a driver performance feedback and monitoring device in ground emergency medical service vehicles.

    Science.gov (United States)

    Levick, Nadine R; Swanson, Jon

    2005-01-01

    A prospective study was conducted to determine if emergency vehicle driver risk behavior could be improved with an onboard computer-monitoring device, with real time auditory feedback. Data were collected over 18 months from 36 vehicles in a metropolitan EMS group, with >250 drivers. In >1.9 million recorded miles, performance improved from a baseline low of 0.018 miles between penalty counts to a high of 15.8 miles between counts. Seatbelt violations dropped from 13,500 to 4. There was a 20% saving in vehicle maintenance costs within 6 months. This technology demonstrated sustained cost savings in regards to vehicle maintenance as well as minimal retraining of drivers.

  9. Identification and validation of a logistic regression model for predicting serious injuries associated with motor vehicle crashes.

    Science.gov (United States)

    Kononen, Douglas W; Flannagan, Carol A C; Wang, Stewart C

    2011-01-01

    A multivariate logistic regression model, based upon National Automotive Sampling System Crashworthiness Data System (NASS-CDS) data for calendar years 1999-2008, was developed to predict the probability that a crash-involved vehicle will contain one or more occupants with serious or incapacitating injuries. These vehicles were defined as containing at least one occupant coded with an Injury Severity Score (ISS) of greater than or equal to 15, in planar, non-rollover crash events involving Model Year 2000 and newer cars, light trucks, and vans. The target injury outcome measure was developed by the Centers for Disease Control and Prevention (CDC)-led National Expert Panel on Field Triage in their recent revision of the Field Triage Decision Scheme (American College of Surgeons, 2006). The parameters to be used for crash injury prediction were subsequently specified by the National Expert Panel. Model input parameters included: crash direction (front, left, right, and rear), change in velocity (delta-V), multiple vs. single impacts, belt use, presence of at least one older occupant (≥ 55 years old), presence of at least one female in the vehicle, and vehicle type (car, pickup truck, van, and sport utility). The model was developed using predictor variables that may be readily available, post-crash, from OnStar-like telematics systems. Model sensitivity and specificity were 40% and 98%, respectively, using a probability cutpoint of 0.20. The area under the receiver operator characteristic (ROC) curve for the final model was 0.84. Delta-V (mph), seat belt use and crash direction were the most important predictors of serious injury. Due to the complexity of factors associated with rollover-related injuries, a separate screening algorithm is needed to model injuries associated with this crash mode. Copyright © 2010 Elsevier Ltd. All rights reserved.

  10. Computerized identification and classification of stance phases as made by front or hind feet of walking cows based on 3-dimensional ground reaction forces

    DEFF Research Database (Denmark)

    Skjøth, Flemming; Thorup, V. M.; do Nascimento, Omar Feix

    2013-01-01

    Lameness is a frequent disorder in dairy cows and in large dairy herds manual lameness detection is a time-consuming task. This study describes a method for automatic identification of stance phases in walking cows, and their classification as made by a front or a hind foot based on ground reaction...... force information. Features were derived from measurements made using two parallel 3-dimensional force plates. The approach presented is based on clustering of Centre of Pressure (COP) trace points over space and time, combined with logical sequencing of stance phases based on the dynamics...

  11. A Method for Identification of Driving Patterns in Hybrid Electric Vehicles Based on a LVQ Neural Network

    Directory of Open Access Journals (Sweden)

    Xiaowei Zhang

    2012-09-01

    Full Text Available Driving patterns exert an important influence on the fuel economy of vehicles, especially hybrid electric vehicles. This paper aims to build a method to identify driving patterns with enough accuracy and less sampling time compared than other driving pattern recognition algorithms. Firstly a driving pattern identifier based on a Learning Vector Quantization neural network is established to analyze six selected representative standard driving cycles. Micro-trip extraction and Principal Component Analysis methods are applied to ensure the magnitude and diversity of the training samples. Then via Matlab/Simulink, sample training simulation is conducted to determine the minimum neuron number of the Learning Vector Quantization neural network and, as a result, to help simplify the identifier model structure and reduce the data convergence time. Simulation results have proved the feasibility of this method, which decreases the sampling window length from about 250–300 s to 120 s with an acceptable accuracy. The driving pattern identifier is further used in an optimized co-simulation together with a parallel hybrid vehicle model and improves the fuel economy by about 8%.

  12. Characterizing the Dynamic Response of a Chassis Frame in a Heavy-Duty Dump Vehicle Based on an Improved Stochastic System Identification

    Directory of Open Access Journals (Sweden)

    Zhi Chen

    2015-01-01

    Full Text Available This paper presents an online method for the assessment of the dynamic performance of the chassis frame in a heavy-duty dump truck based on a novel stochastic subspace identification (SSI method. It introduces the use of an average correlation signal as the input data to conventional SSI methods in order to reduce the noisy and nonstationary contents in the vibration signals from the frame, allowing accurate modal properties to be attained for realistically assessing the dynamic behaviour of the frame when the vehicle travels on both bumped and unpaved roads under different operating conditions. The modal results show that the modal properties obtained online are significantly different from the offline ones in that the identifiable modes are less because of the integration of different vehicle systems onto the frame. Moreover, the modal shapes between 7 Hz and 40 Hz clearly indicate the weak section of the structure where earlier fatigues and unsafe operations may occur due to the high relative changes in the modal shapes. In addition, the loaded operations show more modes which cause high deformation on the weak section. These results have verified the performance of the proposed SSI method and provide reliable references for optimizing the construction of the frame.

  13. Identification of dynamic parameters in low-mobility mechanical systems: application to short long arm vehicle suspension

    Science.gov (United States)

    Valero, Francisco; Iriarte, Xabier; Mata, Vicente; Ros, Javier

    2013-08-01

    The identification of dynamic parameters in low-mobility mechanical systems is addressed and applied to short long arm (SLA) front car suspension. The main goal of the identification technique is to obtain, from experimental measurements, the values of those dynamic parameters (masses, location of the centre of masses, terms of the inertial matrix of the links, constant friction terms and elastic and viscous damping constant terms) that affect the dynamic behaviour of the system. Moreover, additional but important information that could be obtained from the procedure is related to the weight of those terms inside the dynamics of the system, so that simplified dynamic models based on relevant and well-identified parameters can be established. First, a systematic procedure will be presented for obtaining the equations of motion in a linear form with regard to the dynamic parameters to be identified. The main drawbacks related to the identification of parameters in low-mobility mechanisms will be pointed out, mainly the difficulty of determining a natural cutoff point into the singular values of the observation matrix which allows us to determine the true dimension of the set of base parameters and of obtaining an observation matrix well conditioned from the numerical point of view that allows an identification in the presence of measurement error. The procedure proposed for overcoming these problems will be based on the development of symbolic relationships among the physical parameters in order to determine the true rank of the observation matrix and on the consideration of a reduced subset of the base parameters set. These relevant parameters will be selected according to their influence on the dynamic behaviour of the mechanical system. A virtual benchmark will be used for testing purposes. The dynamic models based on relevant parameters show a better adjustment than the complete ones, mainly when the level of noise in the measurements used in the identification

  14. Automatic identification of agricultural terraces through object-oriented analysis of very high resolution DSMs and multispectral imagery obtained from an unmanned aerial vehicle.

    Science.gov (United States)

    Diaz-Varela, R A; Zarco-Tejada, P J; Angileri, V; Loudjani, P

    2014-02-15

    Agricultural terraces are features that provide a number of ecosystem services. As a result, their maintenance is supported by measures established by the European Common Agricultural Policy (CAP). In the framework of CAP implementation and monitoring, there is a current and future need for the development of robust, repeatable and cost-effective methodologies for the automatic identification and monitoring of these features at farm scale. This is a complex task, particularly when terraces are associated to complex vegetation cover patterns, as happens with permanent crops (e.g. olive trees). In this study we present a novel methodology for automatic and cost-efficient identification of terraces using only imagery from commercial off-the-shelf (COTS) cameras on board unmanned aerial vehicles (UAVs). Using state-of-the-art computer vision techniques, we generated orthoimagery and digital surface models (DSMs) at 11 cm spatial resolution with low user intervention. In a second stage, these data were used to identify terraces using a multi-scale object-oriented classification method. Results show the potential of this method even in highly complex agricultural areas, both regarding DSM reconstruction and image classification. The UAV-derived DSM had a root mean square error (RMSE) lower than 0.5 m when the height of the terraces was assessed against field GPS data. The subsequent automated terrace classification yielded an overall accuracy of 90% based exclusively on spectral and elevation data derived from the UAV imagery.

  15. 装甲车辆与地面背景的热交互作用及红外仿真%Thermal interactions and infrared simulation of armored vehicles and ground background

    Institute of Scientific and Technical Information of China (English)

    韩玉阁; 成志铎; 任登凤; 宣益民

    2013-01-01

    为了全面揭示装甲车辆与地面背景之间热交互作用对地面背景温度以及红外辐射特性的影响,建立了装甲车辆和地面背景的温度和红外辐射特性的模型,重点考虑了装甲车辆与地面之间的传热.通过对地面和履带相关力学关系的引入,建立运动车辆和地面之间热学以及力学的模型,采用了动网格方法对车辆目标在运动后对地面所产生的沉陷现象及在地面上留下的热痕迹进行模拟仿真.基于红外辐射理论,综合考虑自身辐射、反射辐射以及大气传输特性,计算了车辆在3种不同状态下与地面背景之间的热交互作用及红外辐射特征分布,并比较了模拟温度与实验测量温度的误差,验证了模型的精度.仿真结果表明:该方法对地面目标的隐身设计和隐身技术评估具有十分重要的意义.%In order to fully reveal the influence of thermal interactions between the armored vehicles and ground background on ground background temperature and infrared radiation characteristics, the temperature and infrared signature model of armored vehicles and ground background were established, with focus on heat transfer between armored vehicles and ground.By introducing mechanical relationship between the road and the track, thermal and mechanical models between the moving vehicle and the road were established.Using method of the moving mesh, the subsidence phenomenon and thermal trace on the road after target vehicle moving were simulated.Based on the infrared radiation theory, considering the radiation, reflective radiation and atmospheric transmission characteristic, the thermal interactions and infrared radiation characteristics distribution of armored vehicles and terrain background under three different conditions were calculated.The simulated temperature and measured temperature in the experiment were compared.The model's precision was validated.The simulation results show that this method is

  16. 电动汽车用异步电机参数辨识及优化%Parameters Identification and Optimization for Induction Motor Used in Electric Vehicles

    Institute of Scientific and Technical Information of China (English)

    李强

    2014-01-01

    The vector control system for induction motor used in electric vehicle was analyzed. A parameter identification and optimization algorithm for induction motor was proposed. Two different kinds of frequency sine signals generated by sinusoidal pulse width modulation were injected into the motor respectively, to identify the rotor resistance, mutual inductance and leakage inductance. On the d-axis, a sinusoidal current with DC bias was applied while the q-axis current was controlled to be zero, to optimize the rotor resistance. A step signal was injected into the induction motor to optimize the rotor time constant . The experiments of parameter identification and optimization using the algorithm were carried out on the 7. 5 kW induction motor. All conclusions indicate that the identification and optimization results are correct.%对电动汽车用异步电机矢量控制系统进行了分析,提出一种电动汽车用异步电机参数辨识及优化算法。在H桥式控制原理基础上采用正弦脉宽调制的方法分别向电机注入两种不同频率的正弦信号初步辨识转子电阻、互感及漏感。在同步静止αβ坐标系下,向电机d相注入带有幅值偏量的正弦信号优化电机转子电阻,注入阶跃信号优化转子时间常数。在一台7.5 kW异步电机上进行了试验,试验结果验证了参数辨识及优化方法的正确性。

  17. Compensation of Cable Voltage Drops and Automatic Identification of Cable Parameters in 400 Hz Ground Power Units

    DEFF Research Database (Denmark)

    Borup, Uffe; Nielsen, Bo Vork; Blaabjerg, Frede

    2004-01-01

    In this paper a new cable voltage drop compensation scheme for ground power units (GPU) is presented. The scheme is able to predict and compensate the voltage drop in an output cable by measuring the current quantities at the source. The prediction is based on an advanced cable model that includes...

  18. 大型导弹车工作模态识别研究及应用%Research and application on the operational modal identification of large missile launch vehicle

    Institute of Scientific and Technical Information of China (English)

    赵威; 张永杰; 王喆; 韦冰峰

    2013-01-01

    To solve some problems of the operational modal identification of large missile launch vehicle, a model reflecting the main dynamic characteristics of large missile launch vehicle was made. Modal experiments were conducted and dynamic characteristics of the model were identified using the Least Square Complex Exponent (LSCE) method. Modal identification results were compared and analyzed to evaluate the LSCE method. It was applied to the operational modal identification of large missile launch vehicle. It is of significance to provide references for the dynamic characteristics analysis of large missile launch vehicle.%针对大型导弹车在运输状态下的动态特性识别问题,设计制作了能够反映大型导弹车主要动力学特征的简化模型,使用最小二乘复指数法(LSCE)对简化模型进行了动态特性识别,对识别结果进行了分析和评估,并将最小二乘复指数法应用到真实大型导弹车运输状态的模态识别中。可为大型导弹车运输状态下的动力学特性分析提供参考。

  19. Infrared and visible combat identification marking materials

    Science.gov (United States)

    O'Keefe, Eoin; Shohet, Adam; Swan, Martin

    2007-04-01

    Historically, it is believed that fratricide accounts for up to 15% of friendly casualties during operations and a UK MoD report identifies that almost half of all such casualties occur in situations involving ground units only. Such risks can be mitigated, to an extent, via operational awareness and effective communications. However, recent conflicts have involved a much more dynamic, complex and technically sophisticated battlefield than previously experienced. For example, Operation Telic (Desert Storm) involved almost one million combatants and ten thousand armoured vehicles in the coalition force, advancing across an extensive battlefront at high speed during daylight and at night, making effective use of a range of electro-optic sensors. The accelerated tempo of battle means that front lines can undergo rapid, punctuated advances that can leave individual combat units with a much degraded situational awareness, particularly of where they are in relation to other 'friendly' combatants. Consequently, there is a need for a robust, low cost, low weight, compact, unpowered, interoperable, Combat Identification technique for use with popular electro-optic sensors which can be deployed, and is effective, at the individual combat unit level. In this paper we discuss ground-to-ground combat identification materials that meet these requirements, all of which are based on the air-to-ground Mirage TM vehicle marking material. We show some preliminary ground-to-ground data collected from the new variant Mirage TM material in recent experimental trials conducted during the day, evening and at night.

  20. Identification of microbial isolates from vacuum-packaged ground pork irradiated at 1 kGy. [Pseudomonas sp. ; Enterobacter sp

    Energy Technology Data Exchange (ETDEWEB)

    Ehioba, R.M.; Kraft, A.A.; Molins, R.A.; Walker, H.W.; Olson, D.G.; Subbaraman, G.; Skowronski, R.P.

    Bacterial cultures from irradiated (1 kGy) and nonirradiated, vacuum-packaged ground pork held at 5/sup 0/C were isolated and characterized over a 12-day storage period. The initial flora of the meat was composed mostly of Pseudomonas sp., and Enterobacter sp. Although the microflora of nonirradiated samples gradually shifted from Gram-negative to Gram-positive microorganisms, 76% of the isolates were characterized as Gram-negative at the onset of spoilage (9 days at 5/sup 0/C). In contrast, the irradiated ground pork microflora was mainly Gram-positive (66%) shortly after irradiation and increased to 97% after 9 days at 5/sup 0/C. A total of 720 isolates were identified to genus.

  1. Identification of ground motion features for high-tech facility under far field seismic waves using wavelet packet transform

    Science.gov (United States)

    Huang, Shieh-Kung; Loh, Chin-Hsiung; Chen, Chin-Tsun

    2016-04-01

    Seismic records collected from earthquake with large magnitude and far distance may contain long period seismic waves which have small amplitude but with dominant period up to 10 sec. For a general situation, the long period seismic waves will not endanger the safety of the structural system or cause any uncomfortable for human activity. On the contrary, for those far distant earthquakes, this type of seismic waves may cause a glitch or, furthermore, breakdown to some important equipments/facilities (such as the high-precision facilities in high-tech Fab) and eventually damage the interests of company if the amplitude becomes significant. The previous study showed that the ground motion features such as time-variant dominant frequencies extracted using moving window singular spectrum analysis (MWSSA) and amplitude characteristics of long-period waves identified from slope change of ground motion Arias Intensity can efficiently indicate the damage severity to the high-precision facilities. However, embedding a large hankel matrix to extract long period seismic waves make the MWSSA become a time-consumed process. In this study, the seismic ground motion data collected from broadband seismometer network located in Taiwan were used (with epicenter distance over 1000 km). To monitor the significant long-period waves, the low frequency components of these seismic ground motion data are extracted using wavelet packet transform (WPT) to obtain wavelet coefficients and the wavelet entropy of coefficients are used to identify the amplitude characteristics of long-period waves. The proposed method is a timesaving process compared to MWSSA and can be easily implemented for real-time detection. Comparison and discussion on this method among these different seismic events and the damage severity to the high-precision facilities in high-tech Fab is made.

  2. Systems Engineering of Unmanned DoD Systems: Following the Joint Capabilities Integration and Development System/Defense Acquisition System Process to Develop an Unmanned Ground Vehicle System

    Science.gov (United States)

    2015-12-01

    Manual D-A-1). APAs are “Performance attributes of a system not important enough to be considered KPPs or KSAs, but still appropriate to include in...the CDD or CPD are designated as APAs ” (JCIDS Manual D-A-1). The requirements are expressed using Thresholds (T) and Objectives (O). “Performance...INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS ACV Autonomous Clearance Vehicle AOA analysis of alternatives APA additional

  3. Identification of Drivers in Traffic Accidents and Determination of Passenger Position in a Vehicle by Finger Marks

    Directory of Open Access Journals (Sweden)

    Matej Trapečar

    2012-01-01

    Full Text Available The following paper aims to illustrate certain investigative activities in the forensic analysis and examination of the scene of traffic accidents. When a traffic accident occurs, the scene must be secured as soon as possible to enable professional and proper forensic investigation. Failure to secure the accident scene might result in losing or contaminating the traces, which makes it more difficult to prove or explain trace evidence in further procedure or even makes such evidence inadmissible. The topic is discussed from the viewpoint of crime scene examination, since analysing and investigating traffic accidents requires a great deal of expertise and attention of the investigators. Complex traffic accidents include feigned accidents, hit-and-run accidents as well as accidents in which the driver and passengers, dead or alive, need to be identified. In identifying the passengers, standard criminal investigation methods as well as police forensic and forensic medicine methods are followed. Such methods include confirming the identities with identity documents, other documents and vehicle ownership, fingerprints, biological traces, fibre traces, contact traces, traces of physical injuries on the driver and passengers, etc. According to the results obtained in fingerprint detection on human skin surfaces, this method can also be applied in confirming physical contact between the driver and the passengers in the accident, e.g. in the event of moving the victims and changing the scene of the accident.   Key words: traffic accidents, accident analysis, driver's identity, passengers' position, finger marks, human skin

  4. Recognizing and tracking humans and vehicles using radar

    Science.gov (United States)

    Tahmoush, David; Silvious, Jerry

    2010-01-01

    Dynamic obstacles like vehicles and animals can be distinguished from humans using their radar micro-Doppler signature. This allows customizing the robotic path algorithm to avoid highly sensitive and unpredictable obstacles like humans and rapidly moving obstacles like vehicles. We demonstrate the extraction of stride rate and other information associated with gait for enhanced person recognition from radar data. We describe the radar sensors used for the measurements, the algorithms used for the detection, tracking, and classification of people and vehicles, as well as describe some of the features that can be extracted. These features can serve as rudimentary identifying information in a scene with multiple subjects. We measure human subjects in indoor and outdoor clutter backgrounds for identification and gather ground truth using video to validate the radar data.

  5. Identification of magnetic anomalies based on ground magnetic data analysis using multifractal modelling: a case study in Qoja-Kandi, East Azerbaijan Province, Iran

    Science.gov (United States)

    Mansouri, E.; Feizi, F.; Karbalaei Ramezanali, A. A.

    2015-10-01

    Ground magnetic anomaly separation using the reduction-to-the-pole (RTP) technique and the fractal concentration-area (C-A) method has been applied to the Qoja-Kandi prospecting area in northwestern Iran. The geophysical survey resulting in the ground magnetic data was conducted for magnetic element exploration. Firstly, the RTP technique was applied to recognize underground magnetic anomalies. RTP anomalies were classified into different populations based on the current method. For this reason, drilling point area determination by the RTP technique was complicated for magnetic anomalies, which are in the center and north of the studied area. Next, the C-A method was applied to the RTP magnetic anomalies (RTP-MA) to demonstrate magnetic susceptibility concentrations. This identification was appropriate for increasing the resolution of the drilling point area determination and decreasing the drilling risk issue, due to the economic costs of underground prospecting. In this study, the results of C-A modelling on the RTP-MA are compared with 8 borehole data. The results show that there is a good correlation between anomalies derived via the C-A method and the log report of boreholes. Two boreholes were drilled in magnetic susceptibility concentrations, based on multifractal modelling data analyses, between 63 533.1 and 66 296 nT. Drilling results showed appropriate magnetite thickness with grades greater than 20 % Fe. The total associated with anomalies containing andesite units hosts iron mineralization.

  6. Identification of magnetic anomalies based on ground magnetic data analysis using multifractal modeling: a case study in Qoja-Kandi, East Azerbaijan Province, Iran

    Science.gov (United States)

    Mansouri, E.; Feizi, F.; Karbalaei Ramezanali, A. A.

    2015-07-01

    Ground magnetic anomaly separation using reduction-to-the-pole (RTP) technique and the fractal concentration-area (C-A) method has been applied to the Qoja-Kandi prosepecting area in NW Iran. The geophysical survey that resulted in the ground magnetic data was conducted for magnetic elements exploration. Firstly, RTP technique was applied for recognizing underground magnetic anomalies. RTP anomalies was classified to different populations based on this method. For this reason, drilling points determination with RTP technique was complicated. Next, C-A method was applied on the RTP-Magnetic-Anomalies (RTP-MA) for demonstrating magnetic susceptibility concentration. This identification was appropriate for increasing the resolution of the drilling points determination and decreasing the drilling risk, due to the economic costs of underground prospecting. In this study, the results of C-A Modeling on the RTP-MA are compared with 8 borehole data. The results show there is good correlation between anomalies derived via C-A method and log report of boreholes. Two boreholes were drilled in magnetic susceptibility concentration, based on multifractal modeling data analyses, between 63 533.1 and 66 296 nT. Drilling results show appropriate magnetite thickness with the grades greater than 20 % Fe total. Also, anomalies associated with andesite units host iron mineralization.

  7. Ares I-X Ground Diagnostic Prototype

    Science.gov (United States)

    Schwabacher, Mark A.; Martin, Rodney Alexander; Waterman, Robert D.; Oostdyk, Rebecca Lynn; Ossenfort, John P.; Matthews, Bryan

    2010-01-01

    The automation of pre-launch diagnostics for launch vehicles offers three potential benefits: improving safety, reducing cost, and reducing launch delays. The Ares I-X Ground Diagnostic Prototype demonstrated anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage Thrust Vector Control and for the associated ground hydraulics while the vehicle was in the Vehicle Assembly Building at Kennedy Space Center (KSC) and while it was on the launch pad. The prototype combines three existing tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool from Qualtech Systems Inc. for fault isolation and diagnostics. The second tool, SHINE (Spacecraft Health Inference Engine), is a rule-based expert system that was developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification, and used the outputs of SHINE as inputs to TEAMS. The third tool, IMS (Inductive Monitoring System), is an anomaly detection tool that was developed at NASA Ames Research Center. The three tools were integrated and deployed to KSC, where they were interfaced with live data. This paper describes how the prototype performed during the period of time before the launch, including accuracy and computer resource usage. The paper concludes with some of the lessons that we learned from the experience of developing and deploying the prototype.

  8. An approach to identification and modelling of artificial grounds in urban area from multidisciplinary data (Oviedo, NW Spain)

    Science.gov (United States)

    Pando, Luis; Flor-Blanco, Germán; María Díaz-Díaz, Luis; Arias, Daniel

    2016-04-01

    This contribution describes the investigation of changes on urban relief caused by anthropogenic processes in Oviedo (population 215,000), the capital city of Asturias, formerly a Christian kingdom (719-925 AD) located in the north-western Iberian Peninsula. This city is placed on a Mesozoic-Cenozoic basin above a folded Paleozoic basement. Oviedo's subsurface is formed by carbonate and siliciclastic Cretaceous formations, and the overlying fluvial-lacustrine deposits of Paleogene age; the latter are mainly composed of marls, clays and gypsum layers. The urban core, which extends 15 km2, presents an elevation range between 160 to 330 m above mean sea level and the natural slopes reach up 15o in the built-up area. The research involved at first the collection and review of more than 950 borehole logs, presenting the man-made fills an average thickness of 1.9 m with maximum value of 25 m. Then topographic variations that occurred during the period of greatest urban development were analysed through map algebra. The data used to construct Digital Elevation Models (DEM) were provided by 1:5,000 city maps performed since 1869 to the present, all properly georeferenced. The subtraction operations generated Digital Terrain Models representing ground elevation gains and losses during different periods of time, after setting the necessary control points (elevation remains invariant) and corrections in order to avoid altitude deviations between DEMs. The thicknesses estimated for the man-made fills were compared with borehole data to validate the prediction, obtaining good correlations. The GIS-based methodology was complemented by an inspection of the historical evolution of land uses (i.e., using ancient street maps, aerial images interpretation and documentary references since the thirteenth century), and the analysis of all the surficial geological maps that have been published. Man-made grounds were then classified into categories, mainly: (i) earthworks related to

  9. Vehicle to Vehicle Services

    DEFF Research Database (Denmark)

    Brønsted, Jeppe Rørbæk

    2008-01-01

    , mobility, and availability of services. The dissertation consists of two parts. Part I gives an overview of service oriented architecture for pervasive computing systems and describes the contributions of the publications listed in part II. We investigate architecture for vehicular technology applications......As computing devices, sensors, and actuators pervade our surroundings, new applications emerge with accompanying research challenges. In the transportation domain vehicles are being linked by wireless communication and equipped with an array of sensors and actuators that make is possible to provide...... location aware infotainment, increase safety, and lessen environmental strain. This dissertation is about service oriented architecture for pervasive computing with an emphasis on vehicle to vehicle applications. If devices are exposed as services, applications can be created by composing a set of services...

  10. 基于自适应遗传算法的飞行器气动参数辨识%Aerodynamic parameter identification of flight vehicles based on adaptive genetic algorithm

    Institute of Scientific and Technical Information of China (English)

    王晓鹏

    2003-01-01

    为了克服传统辨识算法的缺点,把自适应遗传算法作为辨识算法,进行飞行器的非线性气动参数的最大似然仿真辨识.在仿真辨识中,加入了零均值高斯分布的随机观测噪声.辨识结果比较满意,表明自适应遗传算法具有良好的优化性能,是进行气动参数辨识的一种实用的辨识算法.%To overcome the disadvantages of conventional identification algorithms,nonlinear aerodynamic parameter identification of flight vehicles using maximum likelihood method,based on simulation data,is carried out,where adaptive genetic algorithm is taken as identification algorithm.During the course of identification,zero-mean-value random measure noises with Guassian distribution are introduced.The results of identification are rather satisfactory,which shows that adaptive genetic algorithm has excellent performance of optimization and may be taken as a practical identification algorithm for aerodynamic parameter identification.

  11. 电动汽车车身平顺性及车轮接地性分析与优化%Analysis and Optimization of Ride Comfort and Wheel Ground Adhesion of Electric Vehicle

    Institute of Scientific and Technical Information of China (English)

    张擎宇; 陈辛波

    2014-01-01

    以某分布式四轮驱动电动汽车为研究对象,在Adams/car中建立了整车模型,通过对前、后悬架参数进行灵敏度分析,探讨其对车身平顺性与车轮接地性的影响。基于α法建立评价车身平顺性与车轮接地性指标的多目标函数,对灵敏度较高的悬架参数进行优化设计。结果表明,优化后前、后悬架的刚度减小,前悬架的阻尼增大。与优化前相比,车身垂向加速度均方根值减小16%,左、右前轮动载荷的均方根值均减小11%。%With a distributed 4WD electric vehicle as research object, a vehicle model is constructed in Adams/car environment. Sensitivity analysis is made to the front and rear suspension parameters, its effect on ride comfort and wheel ground adhesion is investigated. Multi-objective function to evaluate body ride comfort and wheel ground adhesion is established based on α method and suspension parameters with high sensitivity are optimized. The results indicate that stiffness of the optimized front and rear suspension descends, whereas damping of the front suspension ascends. Compared with the suspension before optimization, the root-mean-square value of body vertical acceleration is reduced by 16%, and that of the front wheels on both sides is reduced by 11%.

  12. Evaluation of the ImmerVision IMV1-1/3NI Panomorph Lens on a Small Unmanned Ground Vehicle (SUGV)

    Science.gov (United States)

    2013-07-01

    sensor with a PTZ lens can detect and track objects kilometers away at the expense of a narrow FOV, slow focusing, and shallow depth of field. On...is parked on a grassy area next to a sidewalk about 6 in higher than the road. This extra height discrepancy causes parts of a vehicle’s tires and a...to cue other narrow FOV cameras for distant object identification. Without a 360° panorama, a narrow FOV camera would have to be continuously panned

  13. The Special Purpose Vehicle

    DEFF Research Database (Denmark)

    Fomcenco, Alex

    2013-01-01

    The purpose of this article is to investigate whether the situation where two companies appear as originators or sponsors behind a Special Purpose Vehicle (SPV) can be described as a merger, although on micro scale. Are the underlying grounds behind the creation of an SPV much different than thos...

  14. Identification of active release planes using ground-based differential InSAR at the Randa rock slope instability, Switzerland

    Directory of Open Access Journals (Sweden)

    V. Gischig

    2009-12-01

    Full Text Available Five ground-based differential interferometric synthetic aperture radar (GB-DInSAR surveys were conducted between 2005 and 2007 at the rock slope instability at Randa, Switzerland. Resultant displacement maps revealed, for the first time, the presence of an active basal rupture zone and a lateral release surface daylighting on the exposed 1991 failure scarp. Structures correlated with the boundaries of interferometric displacement domains were confirmed using a helicopter-based LiDAR DTM and oblique aerial photography. Former investigations at the site failed to conclusively detect these active release surfaces essential for kinematic and hazard analysis of the instability, although their existence had been hypothesized. The determination of the basal and lateral release planes also allowed a more accurate estimate of the currently unstable volume of 5.7±1.5 million m3. The displacement patterns reveal that two different kinematic behaviors dominate the instability, i.e. toppling above 2200 m and translational failure below. In the toppling part of the instability the areas with the highest GB-DInSAR displacements correspond to areas of enhanced micro-seismic activity. The observation of only few strongly active discontinuities daylighting on the 1991 failure surface points to a rather uniform movement in the lower portion of the instability, while most of the slip occurs along the basal rupture plane. Comparison of GB-DInSAR displacements with mapped discontinuities revealed correlations between displacement patterns and active structures, although spatial offsets occur as a result of the effective resolution of GB-DInSAR. Similarly, comparisons with measurements from total station surveys generally showed good agreement. Discrepancies arose in several cases due to local movement of blocks, the size of which could not be resolved using GB-DInSAR.

  15. 不平顺路面的车辆动载诱发饱和地基的动应力响应%Influences of vehicle dynamic load on dynamic stress in saturated poro-elastic ground

    Institute of Scientific and Technical Information of China (English)

    周仁义; 钱建固; 黄茂松

    2016-01-01

    对由于不平顺路面引起的车辆附加动荷载在饱和多孔地基中的动应力开展了解析理论研究。通过承受移动矩形垂直荷载的三维饱和多孔地基的基本解,采用矩阵递推法得到多层饱和半空间解,数值积分得到数值结果。将该方法运用于具有不平顺路面的饱和多孔半空间的情况,得到了附加动荷载在饱和多孔地基中所产生的动应力。计算结果分析了分层地基半空间计算模型的优点,还发现土体的软硬程度对地基动应力极为重要。附加动荷载的速度频率同步效应在地基中作用明显,尤其对于所产生的剪应力,在具有较硬较厚路面的情况下,附加动荷载所产生的剪应力的最大值已经超过自重恒载所产生的剪应力。不平顺波长对动应力也有很大影响,尤其是短波不平顺。在高速移动的四轮车辆荷载的情况下,不平顺的路面会造成地基的剧烈振动,不平顺波长越短(即路面越不平整),振动的越剧烈。%Here,the influences of dynamic component of vehicle load (caused by pavement roughness)on the dynamic stress responses in poroelastic ground were studied.By introducing an analytical solution to the three-dimensional dynamic stress in a saturated poroelastic half space subjected to a harmonic rectangular moving load,the solutions to a multi-layered saturated poroelastic half space under moving loading were derived using the transfer matrix method. Numerical results were obtained by performing inverse Fourier transformation.In the case of rough road in a saturated poroelastic half space,the numerical results were obtained and used to analyze the influences of the dynamic component of vehicle load (caused by pavement roughness)on the dynamic stress responses in the half space.The results showed that the advantages of the multi-layered poroelastic half space computing model and the stiffness of soil are important to the dynamic

  16. Cooperative ground moving target track method using two unmanned aerial vehicles%一种双无人机协同跟踪地面移动目标方法

    Institute of Scientific and Technical Information of China (English)

    符小卫; 侯建永; 高晓光; 刘重

    2013-01-01

    This paper investigated the cooperative tracking of a ground moving target using two unmanned aerial vehicles under communication delay,and constructed an algorithm model.Considering the communication delay,it proposed a data fusion method combined with the recursive least squares filtering and the weighted least squres.Then it built the recursive least squares filtering for the prediction of target states,designed a trajectory planning algorithm based on receding horizon and the distributed genetic algorithm to implement the task of cooperative target tracking using two unmanned aerial vehicles.The fitness function consisted of several components including the distance of vehicles and target,the communication distance of vehicles,the communication angle of vehicles.Simulation studies show the cooperative track algorithm can implement the track task well;compared to one vehicle track the target,the position error decreases obviously,the position error during to the communication delay can decrease.%针对通信延时情况下双无人机协同跟踪地面移动目标问题进行研究,构建了基于分布式遗传算法和滚动时域优化结合的目标跟踪航迹规划算法模型.考虑到通信延时会增加目标状态信息数据融合时的误差,导致无人机跟踪任务效果变差,结合递推最小二乘滤波和加权最小二乘估计设计了融合方法,来融合处理目标状态信息;考虑到无人机对目标的观测效果与未来时刻的目标状态信息密切相关,采用递推最小二乘滤波预测目标的状态信息,结合分布式遗传算法和滚动时域优化设计了双无人机目标跟踪航迹规划算法.适应度函数考虑了无人机和目标之间的距离、无人机之间的通信距离、无人机之间的通信角度.仿真结果表明:该协同跟踪方法能够较好地完成跟踪任务;与一架无人机跟踪相比误差明显减小,并且可以减小通信延时带来的跟踪误差.

  17. 2007 Tactical Wheeled Vehicles Conference (TWV)

    Science.gov (United States)

    2007-02-06

    Ground Mobility Enhancements 7322 Vehicles MRAP Vehicles Survivability Bridge to JLTV / MIC -- Current Theater Requirements Ground Mobility...DAB/MS B ASARC PROPOSAL SUBMISSION Stand-up JPO JROC ICD Approval 801/805/818 Certifications 1 2 3 TMA TRA Concept Decision/ MS A JLTV Acquisition

  18. Intelligent Vehicle Health Management

    Science.gov (United States)

    Paris, Deidre E.; Trevino, Luis; Watson, Michael D.

    2005-01-01

    As a part of the overall goal of developing Integrated Vehicle Health Management systems for aerospace vehicles, the NASA Faculty Fellowship Program (NFFP) at Marshall Space Flight Center has performed a pilot study on IVHM principals which integrates researched IVHM technologies in support of Integrated Intelligent Vehicle Management (IIVM). IVHM is the process of assessing, preserving, and restoring system functionality across flight and ground systems (NASA NGLT 2004). The framework presented in this paper integrates advanced computational techniques with sensor and communication technologies for spacecraft that can generate responses through detection, diagnosis, reasoning, and adapt to system faults in support of INM. These real-time responses allow the IIVM to modify the affected vehicle subsystem(s) prior to a catastrophic event. Furthermore, the objective of this pilot program is to develop and integrate technologies which can provide a continuous, intelligent, and adaptive health state of a vehicle and use this information to improve safety and reduce costs of operations. Recent investments in avionics, health management, and controls have been directed towards IIVM. As this concept has matured, it has become clear the INM requires the same sensors and processing capabilities as the real-time avionics functions to support diagnosis of subsystem problems. New sensors have been proposed, in addition, to augment the avionics sensors to support better system monitoring and diagnostics. As the designs have been considered, a synergy has been realized where the real-time avionics can utilize sensors proposed for diagnostics and prognostics to make better real-time decisions in response to detected failures. IIVM provides for a single system allowing modularity of functions and hardware across the vehicle. The framework that supports IIVM consists of 11 major on-board functions necessary to fully manage a space vehicle maintaining crew safety and mission

  19. Fast Identification of Near-Trench Earthquakes Along the Mexican Subduction Zone Based on Characteristics of Ground Motion in Mexico City

    Science.gov (United States)

    Perez-Campos, X.; Singh, S. K.; Arroyo, D.; Rodríguez, Q.; Iglesias, A.

    2015-12-01

    The disastrous 1985 Michoacan earthquake gave rise to a seismic alert system for Mexico City which became operational in 1991. Initially limited to earthquakes along the Guerrero coast, the system now has a much wider coverage. Also, the 2004 Sumatra earthquake exposed the need for a tsunami early warning along the Mexican subduction zone. A fast identification of near-trench earthquakes along this zone may be useful in issuing a reliable early tsunami alert. The confusion caused by low PGA for the magnitude of an earthquake, leading to "missed" seismic alert, would be averted if its near-trench origin can be quickly established. It may also help reveal the spatial extent and degree of seismic coupling on the near-trench portion of the plate interface. This would lead to a better understanding of tsunami potential and seismic hazard along the Mexican subduction zone. We explore three methods for quick detection of near-trench earthquakes, testing them on recordings of 65 earthquakes at station CU in Mexico City (4.8 ≤Mw≤8.0; 270≤R≤615 km). The first method is based on the ratio of total to high-frequency energy, ER (Shapiro et al., 1998). The second method is based on parameter Sa*(6) which is the pseudo-acceleration response spectrum with 5% damping, Sa, at 6 s normalized by the PGA. The third parameter is the PGA residual, RESN, at CU, with respect to a newly-derived ground motion prediction equation at CU for coastal shallow-dipping thrust earthquakes following a bayesian approach. Since the near-trench earthquakes are relatively deficient in high-frequency radiation, we expect ER and Sa*(6) to be relatively large and RESN to be negative for such events. Tests on CU recordings show that if ER ≥ 100 and/or Sa*(6) ≥ 0.70, then the earthquake is near trench; for these events RESN ≤ 0. Such an event has greater tsunami potential. Few misidentifications and missed events are most probably a consequence of poor location, although unusual depth and source

  20. 地面无人作战系统机械臂运动学建模与仿真%Establishment and Simulation Study on Kinematics Model of Unmanned Ground Combat Vehicle Robot Manipulators

    Institute of Scientific and Technical Information of China (English)

    席雷平; 陈自力; 田庆民

    2012-01-01

    The correlative problem of robotic manipulators kinematics model is discussed for Unmanned Ground Combat Vehicle in this paper. Considering the structure of robotic manipulators, the kinematics model is established with D-H method. Based on it,the forward and inverse kinematics equations are solved. Then,simulation and verification is performed by Robotics Toolbox of Matlab software for the structure and kinematics analysis. The results show that this method is correct and feasible.%以某地面无人作战系统中的机械臂为研究对象,探讨其运动学模型建立中的相关问题.结合该机械臂的结构特点,利用D-H方法建立其相应的运动学模型,并在该基础上求解机械臂的正、逆运动学方程.最后在Matlab环境下,借助Robotics Toolbox工具箱对该机械臂的结构和运动学问题进行验证和仿真.仿真结果表明:该设计方法是正确可行的.

  1. Cooperative tracking of ground moving target using unmanned aerial vehicles in cluttered environment%复杂环境下多无人机协作式地面移动目标跟踪

    Institute of Scientific and Technical Information of China (English)

    王林; 彭辉; 朱华勇; 沈林成

    2011-01-01

    针对多无人机(UAV)协同地面移动目标跟踪问题展开研究.提出一种基于主动感知的问题求解框架,建立多UAV协同目标跟踪问题模型;在此基础上,采用分布式无色信息滤波实现目标状态融合估计与预测;然后,基于预测目标状态,结合滚动时域控制与遗传算法设计一种多UAV在线协同航迹规划算法.仿真结果表明:结合预测目标状态在线优化UAV航迹能够获得更好的目标跟踪性能.%We investigate the cooperative tracking of a ground moving target in a cluttered environment by using unmanned aerial vehicles(UAV). Firstly, a model the cooperative target tracking by UAV is developed based on active sensing;secondly, a distributed unscented information filter is built for the estimation fusion and the prediction of target states. Finally, an online trajectory planning algorithm based on the receding horizon control and the genetic algorithm is designed and implemented, with the predicted target states as the inputs to this planning algorithm. Numerical simulations demonstrate that the proposed method effectively improves the performance of target tracking.

  2. Localizing Ground-Penetrating Radar

    Science.gov (United States)

    2014-11-01

    ing Ground-Penetrating Radar (LGPR) uses very high frequency (VHF) radar reflections of underground features to generate base- line maps and then...Innovative ground- penetrating radar that maps underground geological features provides autonomous vehicles with real-time localization. Localizing...NOV 2014 2. REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE Localizing Ground-Penetrating Radar 5a. CONTRACT NUMBER

  3. Electric vehicles

    Science.gov (United States)

    1990-03-01

    Quiet, clean, and efficient, electric vehicles (EVs) may someday become a practical mode of transportation for the general public. Electric vehicles can provide many advantages for the nation's environment and energy supply because they run on electricity, which can be produced from many sources of energy such as coal, natural gas, uranium, and hydropower. These vehicles offer fuel versatility to the transportation sector, which depends almost solely on oil for its energy needs. Electric vehicles are any mode of transportation operated by a motor that receives electricity from a battery or fuel cell. EVs come in all shapes and sizes and may be used for different tasks. Some EVs are small and simple, such as golf carts and electric wheel chairs. Others are larger and more complex, such as automobile and vans. Some EVs, such as fork lifts, are used in industries. In this fact sheet, we will discuss mostly automobiles and vans. There are also variations on electric vehicles, such as hybrid vehicles and solar-powered vehicles. Hybrid vehicles use electricity as their primary source of energy, however, they also use a backup source of energy, such as gasoline, methanol or ethanol. Solar-powered vehicles are electric vehicles that use photovoltaic cells (cells that convert solar energy to electricity) rather than utility-supplied electricity to recharge the batteries. These concepts are discussed.

  4. The Special Purpose Vehicle

    DEFF Research Database (Denmark)

    Fomcenco, Alex

    2013-01-01

    The purpose of this article is to investigate whether the situation where two companies appear as originators or sponsors behind a Special Purpose Vehicle (SPV) can be described as a merger, although on micro scale. Are the underlying grounds behind the creation of an SPV much different than thos...... in a merger situation? What is actually happening when two enterprises originate an SPV? And what distinguishes an SPV from a joint venture, or is it the same thing?...

  5. TARDEC Ground Vehicle Robotics: Vehicle Dynamic Characterization and Research

    Science.gov (United States)

    2015-09-01

    reason why most consumer automobiles come from the factory in an understeer configuration, so that if something goes wrong in a maneuver, the car will...This has a bit to do with suspension design, which isn’t something I want to dive into, so I’ll keep the explanations brief and google can fill... car loses traction and skids out. This test is essential in characterizing the UNCLASSIFIED UNCLASSIFIED steady state cornering capabilities of

  6. Parameter Identification of Vehicle Powertrain Mounting System%车辆动力总成悬置系统参数识别

    Institute of Scientific and Technical Information of China (English)

    陈世嵬; 蹇开林; 李锐; 陈伟民; 廖昌荣

    2011-01-01

    It is one of the important requisites for active vibration isolation of a vehicle powertrain mounting system to accurately acquire the inertia properties and the unbalanced forces of the powertrain. Based on the damping controllability of the magneto-rheological damper and the relativity between the unbalanced forces and the rotary speed of the engine, a new method for identifying inertia parameters and unbalanced forces of engine is proposed by measuring engine mount accelerations and support reactions on different damper coefficients. Compared with traditional methods, this method has the merits of targeted, repeated test without motor lifting, all parameters identified simultaneously. The effectiveness of this method is verified by the finite element numerical simulation data of a simple modeland the on-site measured data of a four-cylinder four-stroke powertrain. Results show that the recognition accuracy of inertia parameters meets the engineering needs and the unbalance force identification results are more realistic compared to the simplified theoretical formula.%精确识别车辆动力总成不平衡力以及惯性参数,是对车辆发动机振动进行主动隔离的基础.根据发动机不平衡力只与发动机内部结构以及转速相关的特性,提出一种利用磁流变减振器阻尼参数的可控性,通过测试不同阻尼环境下的各悬置加速度和支座反力,进而识别发动机惯性参数以及不平衡力的新方法.该方法在应用于车辆动力总成悬置系统参数识别时,对比传统识别方法具有针对性强,重复测试不需要起吊发动机,能在识别发动机惯性参数的同时识别不平衡力的特点.利用一个简单模型的有限元数值模拟数据和一个实际四缸四冲程直列式发动机的现场实测数据对新方法进行验证,结果表明,新方法的发动机转动惯量识别精度满足工程应用要求,发动机不平衡力识别结果比简化后的理论公式更能反

  7. Forward-looking three dimensional imaging technique for InSAR mounted on ground vehicles%车载 InSAR 前视三维成像技术

    Institute of Scientific and Technical Information of China (English)

    王建; 李杨寰; 张汉华; 陆必应; 宋千; 周智敏

    2014-01-01

    It is a difficult task for an unmanned ground vehicle (UGV)to sense obstacles in out fields or unstructured environments.Because the height information is a vital feature to boost the performance of obstacle discrimination,the three-dimensional imaging technique for sensing obstacles ahead UGV of interferometric synthetic aperture radar (InSAR)was presented.The basic signal process flow of InSAR was reviewed. Special factors of the UGV platform that impact the digital elevation model (DEM)measurement precision were analyzed,such as the baseline length,platform motion errors.The DEMof a partial sight-blocked obstacle scene was obtained by processing the three-dimensional InSAR image, which proved the feasibility of applying InSAR to obstacle sensing of UGV.%野外和非结构化环境下的障碍探测是无人驾驶车(UGV)环境感知的难题之一。基于高度识别障碍是一种有效的解决途径,提出了干涉合成孔径雷达(InSAR)的三维障碍物成像策略,研究了 InSAR 信息处理流程,分析了干涉基线和运动误差对车载 InSAR 高程测量精度的影响,仿真了无人车前场景存在遮挡时的 InSAR 高程测量,证明了 InSAR 用于 UGV 前方环境感知的可行性。

  8. Unmanned Ground Vehicle (UGV) Interoperability Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The UGV Interoperability Lab provides the capability to verify vendor conformance against government-defined interoperability profiles (IOPs). This capability allows...

  9. Advanced Composites for Air and Ground Vehicles

    Science.gov (United States)

    2015-08-01

    Progress in polymer science, 2003. 28(11): p. 1539–1641. 6. Kojima, Y., et al., “Mechanical properties of nylon 6-clay hybrid,” Journal of...Mechanical properties of nylon 6-clay hybrid,” Journal of Materials Research(USA), 1993. 8(5): p. 1185–1189. 41. Mesbah, A., et al., “Experimental...the sensors directly through cables and wires has a high installation and material cost. Wireless sensor networks (WSNs) offer a promising solution

  10. Unmanned Ground Vehicle Communications Relays: Lessons Learned

    Science.gov (United States)

    2014-04-01

    between the “ hello ” messages that are automatically sent to monitor the network status. Software modifications were made to enable sub-second “ hello ...intervals. Experimenting with different values of “ hello ” intervals showed that 10 “ hellos ” a second gave near real-time network convergence and

  11. Remote Vision Systems for Teleoperated Ground Vehicles

    Science.gov (United States)

    1991-05-01

    Information Operations end Reports. 1215J1elterson Davis Highway. Suite 1204. Arlington. VA 22202-4302. and to the Offce of Management and Budget...Paperworkr Reductlo Proyect (0704-0188). Washingtont. DC 20503._____________________ I AGENCY USE ONLY (Leave bAW4V 2 REPORT DATE 3 REPORT TYPE AND DATES...and scannable panel displays require further development. 6.0 ACKNOWLEDEMENTS. The authors acknowledge NOSC UGV Program Manager , Thomas W. Hughes, for

  12. Ground Vehicle Navigation Using Magnetic Field Variation

    Science.gov (United States)

    2012-09-13

    using three-axis magnetic field measurements for navigation. While Storms innovative work exposed the ability to navigate using three-axis magnetometer...level of difficulty, Ascher et al. combine a magnetometer with a pair of inertial measurement units, a barometer , and a laser for precise indoor

  13. International Assessment of Unmanned Ground Vehicles

    Science.gov (United States)

    2008-02-01

    toward civil applica- tions, advances in enabling technologies [e.g., sensors; propulsion and traction; autonomous navigation, command and control (C2...art. Laser radar and laser profiling also have numerous civil appli- cations. A strong market exists for precise, high spatial resolution (1.0 m to 0.3...Establishment for Applied Science)], Belgium (Royal Military Acad- emy), Italy (Oto Melara of Finmeccanica), and Spain (Sener Ingenieria y Sistemas SA

  14. Remote Imagery for Unmanned Ground Vehicles (RIUGV)

    Science.gov (United States)

    2005-03-25

    intelligence, pipeline monitoring, urban mapping, natural hazard detection, coastal /marine mapping, exploration & mining, and disaster management. All...and loaded into the executive software of the UGV employed in the test environment. Landcover analysis Figure 4: Off-Road Course Images

  15. Wall Climbing Micro Ground Vehicle (MGV)

    Science.gov (United States)

    2013-09-01

    into the preliminary design of the control platform. This concept is used on the City Climber robot from the City College of New York to redirect... Chennai , India, 2011. 6. Lee, Y.; Ahuja, V.; Hosangadi, A.; Slipper, M. E.; Mulvihill, L. P.; Birkbeck, R.; Coleman, R. M. Impeller Design of a...Teheran, Iran, 2011. 12. Xiao, J.; Sadegh, A. City -Climber: A New Generation Wall-Climbing Robots; The City College, City University of New York USA

  16. Longitudinal force estimation for motorized wheels driving electric vehicle based on improved closed-loop subspace identification%基于改进闭环子空间辨识的电动轮汽车纵向力估计

    Institute of Scientific and Technical Information of China (English)

    徐兴; 陈特; 陈龙; 王吴杰

    2016-01-01

    In order to realize the control and coordinated allocation of tire longitudinal force for motorized wheels driving electric vehicle,a longitudinal force estimation method was proposed based on improved closed-loop subspace identification.The characteristics of electric drive system of motorized wheels driving vehicle was analyzed to propose a longitudinal force estimation model.The road simulation test on chassis dynamometer was carried out, and the experimental data were collected. The subspace identification algorithm N4SID was deviated when model input and noise were correlated.To solve the problem,an improved closed-loop subspace identification method was investigated.The results show that compared with N4SID identification method,the improved closed-loop subspace identification method has better anti-interference ability with higher longitudinal force estimation accuracy and better real-time tracking capability,which can meet the requirements of driving force model predictive control based on data driving.%为实现电动轮汽车轮胎纵向力的控制与协调分配,提出了基于改进闭环子空间辨识的电动轮汽车纵向力估计方法。分析了电动轮汽车电驱动系统特性,在此基础上提出了用于辨识的纵向力估计模型。进行底盘测功机道路模拟试验并采集数据。模型输入与噪声相关时,子空间 N4SID (nu-merical algorithm for subspace identification)辨识算法是有偏的,针对这一问题,研究了一种改进闭环子空间辨识算法。结果表明:对比子空间 N4SID 辨识算法,改进闭环子空间辨识算法辨识出的模型具有更好的抗干扰性,纵向力估计精度更高,实时跟踪效果更好,满足基于数据驱动的驱动力模型预测控制的需求。

  17. Constraint Embedding for Vehicle Suspension Dynamics

    Directory of Open Access Journals (Sweden)

    Jain Abhinandan

    2016-06-01

    Full Text Available The goal of this research is to achieve close to real-time dynamics performance for allowing auto-pilot in-the-loop testing of unmanned ground vehicles (UGV for urban as well as off-road scenarios. The overall vehicle dynamics performance is governed by the multibody dynamics model for the vehicle, the wheel/terrain interaction dynamics and the onboard control system. The topic of this paper is the development of computationally efficient and accurate dynamics model for ground vehicles with complex suspension dynamics. A challenge is that typical vehicle suspensions involve closed-chain loops which require expensive DAE integration techniques. In this paper, we illustrate the use the alternative constraint embedding technique to reduce the cost and improve the accuracy of the dynamics model for the vehicle.

  18. Abandoned vehicles

    CERN Multimedia

    Relations with the Host States Service

    2004-01-01

    The services in charge of managing the CERN site have recently noted an increase in the number of abandoned vehicles. This poses a risk from the point of view of safety and security and, on the eve of several important events in honour of CERN's fiftieth anniversary, is detrimental to the Organization's image. Owners of vehicles that have been left immobile for some time on the CERN site, including on the external car park by the flags, are therefore invited to contact the Reception and Access Control Service (service-parking-longterm@cern.ch) before 1st October 2004 and, where appropriate, move their vehicle to a designated long-term parking area. After this date, any vehicle whose owner has failed to respond to this request and which is without a number plate, has been stationary for several weeks or is out of service, may be impounded at the owner's risk and expense. Relations with the Host States Service Tel. 72848

  19. 基于车致振动响应的含分布损伤桥梁结构识别方法%Identification of Distributed Damage in Bridges from Vehicle Induced Dynamic Responses

    Institute of Scientific and Technical Information of China (English)

    李海龙; 吕中荣; 刘济科

    2015-01-01

    采用 Newmark 直接积分法和龙格库塔法求解了非线性车桥耦合系统的振动响应,并利用加速度响应灵敏度方法对含裂纹梁结构进行分布类型的损伤识别。文中车辆采用含非线性弹簧的半车模型,桥梁被离散为欧拉梁单元,裂纹引起的桥梁损伤模拟为桥梁局部刚度的线性分布的减少。数值算例表明,在5%噪声情况下,加速度响应灵敏度方法依然可以较准确地识别出桥梁损伤的分布情况。%A distributed damage identification approach under moving vehicle loads is presented based on dynamic response sensitivity.Numerical studies are carried out on a simply supported beam under a vehicle with nonlinear springs for identication of distributed damage due to the crack.Combined Newmark direct integration method and Runge-kutta method are used to calculate the dynamic responses of the cou-pled bridge-vehicle system.The numerical results show that the distributed damage (s)can be identified accurately even with 5% noise in the measured acceleration data.And more accelerometers are needed if there are multiple cracks in the bridge.

  20. Hybrid Turbine Electric Vehicle

    Science.gov (United States)

    Viterna, Larry A.

    1997-01-01

    Hybrid electric power trains may revolutionize today's ground passenger vehicles by significantly improving fuel economy and decreasing emissions. The NASA Lewis Research Center is working with industry, universities, and Government to develop and demonstrate a hybrid electric vehicle. Our partners include Bowling Green State University, the Cleveland Regional Transit Authority, Lincoln Electric Motor Division, the State of Ohio's Department of Development, and Teledyne Ryan Aeronautical. The vehicle will be a heavy class urban transit bus offering double the fuel economy of today's buses and emissions that are reduced to 1/10th of the Environmental Protection Agency's standards. At the heart of the vehicle's drive train is a natural-gas-fueled engine. Initially, a small automotive engine will be tested as a baseline. This will be followed by the introduction of an advanced gas turbine developed from an aircraft jet engine. The engine turns a high-speed generator, producing electricity. Power from both the generator and an onboard energy storage system is then provided to a variable-speed electric motor attached to the rear drive axle. An intelligent power-control system determines the most efficient operation of the engine and energy storage system.

  1. 历史人物伦理思想的指认依据--以梁漱溟为例%Identification grounds of historical figures’ ethical thoughts:Taking Liang Shuming as an example

    Institute of Scientific and Technical Information of China (English)

    廖济忠; 李建华

    2015-01-01

    堪称伦理思想者,当有指认依据在。以梁漱溟为例,提出伦理思想的三个指认依据:一是基本稳定的形上基础;二是相对系统的伦理主张;三是较为广泛的实际影响。只有坚持论从史出,我们才有可能靠近历史人物伦理思想的历史真实和价值真实。%Whether one can be rated as an ethical thinker or not, there should be some identification grounds. By taking Liang Shuming as an example, this paper proposes three identification grounds of ethical thoughts: basically stable metaphysical foundation, relatively systematic ethical proposition, and comparatively extensive and actual influence. Only by adhering to theory coming from historical materials, can we approach historical truth and value truth of historical figures’ ethical thoughts.

  2. Ares I-X Ground Diagnostic Prototype

    Science.gov (United States)

    Schwabacher, Mark; Martin, Rodney; Waterman, Robert; Oostdyk, Rebecca; Ossenfort, John; Matthews, Bryan

    2010-01-01

    Automating prelaunch diagnostics for launch vehicles offers three potential benefits. First, it potentially improves safety by detecting faults that might otherwise have been missed so that they can be corrected before launch. Second, it potentially reduces launch delays by more quickly diagnosing the cause of anomalies that occur during prelaunch processing. Reducing launch delays will be critical to the success of NASA's planned future missions that require in-orbit rendezvous. Third, it potentially reduces costs by reducing both launch delays and the number of people needed to monitor the prelaunch process. NASA is currently developing the Ares I launch vehicle to bring the Orion capsule and its crew of four astronauts to low-earth orbit on their way to the moon. Ares I-X will be the first unmanned test flight of Ares I. It is scheduled to launch on October 27, 2009. The Ares I-X Ground Diagnostic Prototype is a prototype ground diagnostic system that will provide anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage thrust vector control (TVC) and for the associated ground hydraulics while it is in the Vehicle Assembly Building (VAB) at John F. Kennedy Space Center (KSC) and on the launch pad. It will serve as a prototype for a future operational ground diagnostic system for Ares I. The prototype combines three existing diagnostic tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool that is commercially produced by Qualtech Systems, Inc. It uses a qualitative model of failure propagation to perform fault isolation and diagnostics. We adapted an existing TEAMS model of the TVC to use for diagnostics and developed a TEAMS model of the ground hydraulics. The second tool, Spacecraft Health Inference Engine (SHINE), is a rule-based expert system developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification. The prototype

  3. Grounded theory.

    Science.gov (United States)

    Harris, Tina

    2015-04-29

    Grounded theory is a popular research approach in health care and the social sciences. This article provides a description of grounded theory methodology and its key components, using examples from published studies to demonstrate practical application. It aims to demystify grounded theory for novice nurse researchers, by explaining what it is, when to use it, why they would want to use it and how to use it. It should enable nurse researchers to decide if grounded theory is an appropriate approach for their research, and to determine the quality of any grounded theory research they read.

  4. Tropic Testing of Vehicles

    Science.gov (United States)

    2014-08-27

    kilometer track running through tropical forest . The track is a combination of a bauxite/dirt base with grades on the road up to 20 percent and log...TYPE Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Test Operations Procedure (TOP) 02-2-817A Tropic Testing of Vehicles 5a...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Army Yuma Proving Ground Tropic Regions Test Center (TEDT-YPT) 301 C. Street Yuma, AZ

  5. EADS Roadmap for Launch Vehicles

    Science.gov (United States)

    Eymar, Patrick; Grimard, Max

    2002-01-01

    still think about the future, especially at industry level in order to make the most judicious choices in technologies, vehicle types as well as human resources and facilities specialization (especially after recent merger moves). and production as prime contractor, industrial architect or stage provider have taken benefit of this expertise and especially of all the studies ran under national funding and own financing on reusable vehicles and ground/flight demonstrators have analyzed several scenarios. VEHICLES/ASTRIUM SI strategy w.r.t. launch vehicles for the two next decades. Among the main inputs taken into account of course visions of the market evolutions have been considered, but also enlargement of international cooperations and governments requests and supports (e.g. with the influence of large international ventures). 1 patrick.eymar@lanceurs.aeromatra.com 2

  6. 49 CFR 568.4 - Requirements for incomplete vehicle manufacturers.

    Science.gov (United States)

    2010-10-01

    ... document applies. The identification shall be by vehicle identification number (VIN) or groups of VINs to... same tire size designation may, at the option of the incomplete vehicle manufacturer, be stated as a... statement that conformity with the standard cannot be determined based upon the components supplied on the...

  7. electric vehicle

    Directory of Open Access Journals (Sweden)

    W. R. Lee

    1999-01-01

    Full Text Available A major problem facing battery-powered electric vehicles is in their batteries: weight and charge capacity. Thus, a battery-powered electric vehicle only has a short driving range. To travel for a longer distance, the batteries are required to be recharged frequently. In this paper, we construct a model for a battery-powered electric vehicle, in which driving strategy is to be obtained such that the total travelling time between two locations is minimized. The problem is formulated as an optimization problem with switching times and speed as decision variables. This is an unconventional optimization problem. However, by using the control parametrization enhancing technique (CPET, it is shown that this unconventional optimization is equivalent to a conventional optimal parameter selection problem. Numerical examples are solved using the proposed method.

  8. Investigate the rock mechanics aspects of potholes in the platinum mines, their contribution to poor ground conditions, and if proactive identification is possible

    CSIR Research Space (South Africa)

    Urcan, H

    2003-07-01

    Full Text Available The main aim of this project was to define and quantify the effect of potholes on ground conditions in platinum stopes, and assess whether these changes could be used to predict the occurrence of potholes ahead of stope faces. In order to gain...

  9. IDENTIFICATION OF OCEANOGRAPHIC PARAMETERS FOR DETERMINING PELAGIC TUNA FISHING GROUND IN THE NORTH PAPUA WATERS USING MULTI-SENSOR SATELLITE DATA

    Directory of Open Access Journals (Sweden)

    VlNCENTIUS SlREGAR

    2006-01-01

    Full Text Available The North Papua waters as one of the important fi shing grounds in the world contribute approximately 75% of world production of pelagic tunas. These fishing grounds are still determined by hunting method. This method is time consuming and costly. However, in many areas determination of fishing ground using satellited data lias been applied by detecting the important oceanographic parameter of the presence of fish schooling such as, sea surface temperature and chlorophyl. Mostly these parameters are used integrat edly. The aim of this study is to assess the important oceanographic parameters detected from mu lti-sensor satellites (NO AA/AVHRR, Seawifs and Topex Poisedon for determining fishing ground of pelagic tunas in the North Papua waters at east season. The parameters include Sea Surface Temperature (STT, chlorophyl-a and currents. The ava ilability of data from optic sensor (Seawifs: chl-a and AVHRR: Thermal is limited by the presence of cloud cover. In that case, Topex Poseidon satellite data can be used to provide the currents data. The integration of data from multi-sensors increases the availability of the oceanographic parameters for prediction of the potential fishing zones in the study area.

  10. Finding the Enemy: Using 3-D Laser Radar (LADAR) Imaging for Real Time Combat Identification of Ground Targets in an Obscured Environment

    Science.gov (United States)

    2010-04-01

    Algorithms”, p. 197. 23 Ibid, p. 197. 24 http://encyclopedia2.thefreedictionary.com/Bayesian+theory, p. 1. 25 Abdallah, Mahmoud A., Tayib I. Samu , and...Bibliography Abdallah, Mahmoud A., Tayib I. Samu , and William A. Grissom. “Automatic Target Identification Using Neural Networks.” SPIE Vol

  11. Hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    West, J.G.W. [Electrical Machines (United Kingdom)

    1997-07-01

    The reasons for adopting hybrid vehicles result mainly from the lack of adequate range from electric vehicles at an acceptable cost. Hybrids can offer significant improvements in emissions and fuel economy. Series and parallel hybrids are compared. A combination of series and parallel operation would be the ideal. This can be obtained using a planetary gearbox as a power split device allowing a small generator to transfer power to the propulsion motor giving the effect of a CVT. It allows the engine to run at semi-constant speed giving better fuel economy and reduced emissions. Hybrid car developments are described that show the wide range of possible hybrid systems. (author)

  12. Electric-Drive Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Septon, Kendall K [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-11

    Electric-drive vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: Hybrid electric vehicles (HEVs), Plug-in hybrid electric vehicles (PHEVs), All-electric vehicles (EVs). Together, PHEVs and EVs can also be referred to as plug-in electric vehicles (PEVs).

  13. The management of complex system innovations. A theoretic approach to network formation and critical success factor identification using the case of fuel cell vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Venghaus, Sandra

    2011-07-01

    Given the economic, ecological and social importance of automotive transportation, the development of alternative fueling and propulsion technologies requires a wise and sustainable political course of action. Not least the public debate on the impact of transport emissions on climate change and the call for limits to automotive CO-2-emissions reflect the relevance of the topic. In the search for innovative alternatives to the conventional gasoline or diesel propulsion technology, electromobility and hydrogen-based fuel cell vehicles constitute the two most widely discussed long-term options. The market introduction of fuel cell vehicles serves as an expedient example of a highly complex system innovation (CSI), which requires the cooperation of a variety of actors from formerly independent economic sectors in order to overcome the significant barriers to market entry. As will be discussed, such CSI can only be successfully implemented in an environment, within which the complexity-induced knowledge gap is reduced by a systematic exchange of information with respect to both the critical success factors identified by each of the involved stakeholders as well as their cooperation needs and expectations. Given this challenge, a framework is developed, which serves as the basis for a structured dialogue among the multiple stakeholders involved in the development process of a complex system innovation. The framework can thus best be classified as a corporate moderation and decision-support tool to achieve transparency in and impose structure on complex contexts. Methodically, the presented thesis addresses the development of a holistic approach to the management of complex system innovations from two perspectives: (1) a theoretical perspective of analyzing underlying structures and processes of CSI management (i.e., the CSI Management Framework), as well as (2) the development of a strategic approach for the practical implementation of CSI management in complex networks

  14. Grounded cognition.

    Science.gov (United States)

    Barsalou, Lawrence W

    2008-01-01

    Grounded cognition rejects traditional views that cognition is computation on amodal symbols in a modular system, independent of the brain's modal systems for perception, action, and introspection. Instead, grounded cognition proposes that modal simulations, bodily states, and situated action underlie cognition. Accumulating behavioral and neural evidence supporting this view is reviewed from research on perception, memory, knowledge, language, thought, social cognition, and development. Theories of grounded cognition are also reviewed, as are origins of the area and common misperceptions of it. Theoretical, empirical, and methodological issues are raised whose future treatment is likely to affect the growth and impact of grounded cognition.

  15. Shuttle Ground Operations Efficiencies/Technologies Study (SGOE/T). Volume 5: Technical Information Sheets (TIS)

    Science.gov (United States)

    Scholz, A. L.; Hart, M. T.; Lowry, D. J.

    1987-01-01

    The Technology Information Sheet was assembled in database format during Phase I. This document was designed to provide a repository for information pertaining to 144 Operations and Maintenance Instructions (OMI) controlled operations in the Orbiter Processing Facility (OPF), Vehicle Assembly Building (VAB), and PAD. It provides a way to accumulate information about required crew sizes, operations task time duration (serial and/or parallel), special Ground Support Equipment (GSE). required, and identification of a potential application of existing technology or the need for the development of a new technolgoy item.

  16. 78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2013-12-17

    ... Vehicle Fuel Efficiency Program. 536 Transfer and Trading of Fuel Economy Credits. ] 537 Automotive Fuel... Sealed Beam Headlamp Information. 565 Vehicle Identification Number (VIN) Requirements. 566 Manufacturer...: Have we organized the material to suit the public's needs? Are the requirements in the rule...

  17. Research on the transfer learning of the vehicle logo recognition

    Science.gov (United States)

    Zhao, Wei

    2017-08-01

    The Convolutional Neural Network of Deep Learning has been a huge success in the field of image intelligent transportation system can effectively solve the traffic safety, congestion, vehicle management and other problems of traffic in the city. Vehicle identification is a vital part of intelligent transportation, and the effective information in vehicles is of great significance to vehicle identification. With the traffic system on the vehicle identification technology requirements are getting higher and higher, the vehicle as an important type of vehicle information, because it should not be removed, difficult to change and other features for vehicle identification provides an important method. The current vehicle identification recognition (VLR) is mostly used to extract the characteristics of the method of classification, which for complex classification of its generalization ability to be some constraints, if the use of depth learning technology, you need a lot of training samples. In this paper, the method of convolution neural network based on transfer learning can solve this problem effectively, and it has important practical application value in the task of vehicle mark recognition.

  18. 2011 Ground Testing Highlights Article

    Science.gov (United States)

    Ross, James C.; Buchholz, Steven J.

    2011-01-01

    Two tests supporting development of the launch abort system for the Orion MultiPurpose Crew Vehicle were run in the NASA Ames Unitary Plan wind tunnel last year. The first test used a fully metric model to examine the stability and controllability of the Launch Abort Vehicle during potential abort scenarios for Mach numbers ranging from 0.3 to 2.5. The aerodynamic effects of the Abort Motor and Attitude Control Motor plumes were simulated using high-pressure air flowing through independent paths. The aerodynamic effects of the proximity to the launch vehicle during the early moments of an abort were simulated with a remotely actuated Service Module that allowed the position relative to the Crew Module to be varied appropriately. The second test simulated the acoustic environment around the Launch Abort Vehicle caused by the plumes from the 400,000-pound thrust, solid-fueled Abort Motor. To obtain the proper acoustic characteristics of the hot rocket plumes for the flight vehicle, heated Helium was used. A custom Helium supply system was developed for the test consisting of 2 jumbo high-pressure Helium trailers, a twelve-tube accumulator, and a 13MW gas-fired heater borrowed from the Propulsion Simulation Laboratory at NASA Glenn Research Center. The test provided fluctuating surface pressure measurements at over 200 points on the vehicle surface that have now been used to define the ground-testing requirements for the Orion Launch Abort Vehicle.

  19. Risk Identification and Control of Oilfield Ground Engineering Projects Based on Construction Supply Chain%基于工程供应链的油田地面工程项目风险识别与控制

    Institute of Scientific and Technical Information of China (English)

    刘永爱; 牛小成

    2016-01-01

    油田地面工程项目建设的每个环节都存在着风险.为此,根据我国油田地面工程项目风险管理的独立和封闭状态,从工程供应链的角度梳理了我国油田地面工程项目面临的风险类型,并从工程供应链系统的运作过程出发,分析了这些风险给工程供应链带来的危害,由此建立了油田地面工程项目三维风险识别模型,并提出相应的风险控制措施,以期为我国油田地面工程项目的风险识别与控制提供参考依据.%Risks exist at everylinkin the construction of oil field surface engineering project. Therefore,ac-cording to the independent and closed state of risk management about oil field ground engineering project,the risk types of surface engineering projects in oil fields are discussed from the angle of construction supply chain. Meanwhile,the damages to the construction supply chainresulted from these risks are analyzed based on the op-erating process ofconstruction supply chain. Finally,the 3D risk identification model of the oil field surface en-gineering project is established,andsome corresponding control measures are put forward,in order to provide some references for the risk identification and control of our oil ground engineering projects.

  20. Combining BRITE and ground-based photometry for the Beta Cephei star Nu Eridani: impact on photometric pulsation mode identification and detection of several g modes

    CERN Document Server

    Handler, G; Popowicz, A; Pigulski, A; Kuschnig, R; Zoclonska, E; Moffat, A F J; Weiss, W W; Grant, C C; Pablo, H; Whittaker, G N; Rucinski, S M; Ramiaramanantsoa, T; Zwintz, K; Wade, G A

    2016-01-01

    We report a simultaneous ground and space-based photometric study of the Beta Cephei star Nu Eridani. Half a year of observations have been obtained by four of the five satellites constituting BRITE-Constellation, supplemented with ground-based photoelectric photometry. We show that carefully combining the two data sets virtually eliminates the aliasing problem that often hampers time-series analyses. We detect 40 periodic signals intrinsic to the star in the light curves. Despite a lower detection limit we do not recover all the pressure and mixed modes previously reported in the literature, but we newly detect six additional gravity modes. This behaviour is a consequence of temporal changes in the pulsation amplitudes that we also detected for some of the p modes. We point out that the dependence of theoretically predicted pulsation amplitude on wavelength is steeper in visual passbands than those observationally measured, to the extent that the three dominant pulsation modes of Nu Eridani would be incorrec...

  1. Combining BRITE and ground-based photometry for the β Cephei star ν Eridani: impact on photometric pulsation mode identification and detection of several g modes

    Science.gov (United States)

    Handler, G.; Rybicka, M.; Popowicz, A.; Pigulski, A.; Kuschnig, R.; Zocłońska, E.; Moffat, A. F. J.; Weiss, W. W.; Grant, C. C.; Pablo, H.; Whittaker, G. N.; Ruciński, S. M.; Ramiaramanantsoa, T.; Zwintz, K.; Wade, G. A.

    2017-01-01

    We report a simultaneous ground- and space-based photometric study of the β Cephei star ν Eridani. Half a year of observations have been obtained by four of the five satellites constituting BRITE-Constellation, supplemented with ground-based photoelectric photometry. We show that carefully combining the two data sets virtually eliminates the aliasing problem that often hampers time series analyses. We detect 40 periodic signals intrinsic to the star in the light curves. Despite a lower detection limit, we do not recover all the pressure and mixed modes previously reported in the literature, but we newly detect six additional gravity modes. This behaviour is a consequence of temporal changes in the pulsation amplitudes that we also detected for some of the p modes. We point out that the dependence of theoretically predicted pulsation amplitude on wavelength is steeper in visual passbands than those observationally measured, to the extent that three dominant pulsation modes of ν Eridani would be incorrectly identified using data in optical filters only. We discuss possible reasons for this discrepancy.

  2. Combining BRITE and ground-based photometry for the β Cephei star ν Eridani: impact on photometric pulsation mode identification and detection of several g modes

    Science.gov (United States)

    Handler, G.; Rybicka, M.; Popowicz, A.; Pigulski, A.; Kuschnig, R.; Zocłońska, E.; Moffat, A. F. J.; Weiss, W. W.; Grant, C. C.; Pablo, H.; Whittaker, G. N.; Ruciński, S. M.; Ramiaramanantsoa, T.; Zwintz, K.; Wade, G. A.

    2016-10-01

    We report a simultaneous ground and space-based photometric study of the β Cephei star ν Eridani. Half a year of observations have been obtained by four of the five satellites constituting BRITE-Constellation, supplemented with ground-based photoelectric photometry. We show that carefully combining the two data sets virtually eliminates the aliasing problem that often hampers time-series analyses. We detect 40 periodic signals intrinsic to the star in the light curves. Despite a lower detection limit we do not recover all the pressure and mixed modes previously reported in the literature, but we newly detect six additional gravity modes. This behaviour is a consequence of temporal changes in the pulsation amplitudes that we also detected for some of the p modes. We point out that the dependence of theoretically predicted pulsation amplitude on wavelength is steeper in visual passbands than those observationally measured, to the extent that the three dominant pulsation modes of ν Eridani would be incorrectly identified using data in optical filters only. We discuss possible reasons for this discrepancy.

  3. 虚拟车内噪声响度场分布的声源识别分析与优化%Virtual loudness mapping for noise source identification and optimization design for vehicle interior noise reduction

    Institute of Scientific and Technical Information of China (English)

    高印寒; 张澧桐; 梁杰; 王智博; 姜文君

    2016-01-01

    The shortcomings of traditional sound pressures level (SPL)were discussed,such as the lack of subjectivity consideration for noise and so on.A virtual method for predicting loudness characteristics and identifying noise sources based on human auditory properties was applied to analyze vehicle interior noises.In order to reduce the interior low booming of commercial vehicle,a characteristic loudness calculation model for diffuse sound field was built in Matlab on the basis of Zwicker model.The excitation signals at the suspension mountings and the responding signals of the interior noise were measured by road testing.And to predict and calculate the loudness mapping and structural contribution of the cab,an acoustic-structure coupled finite element model was established,by which the influences of the vehicle interior noise from different plates sources on the sound quality frequency spectrum design were analysed.The results of noise source identification reveal that compared with the traditional SPL,the loudness mapping adopted as an identifying parameter in noise source identification is more effective to detect rattling sources from cab plates vibrations.By using the proposed method,the acoustic optimization design of the cab was carried out and results in excellent performances.%针对传统声压级对车内噪声主观性考虑不足的缺陷,提出符合人双耳特性的虚拟车内噪声特征响度预测及声源识别方法。根据某重型商用车驾驶室内低频轰鸣声严重的问题,基于 Zwicker 响度模型,在 matlab 中建立频域的混响场特征响度计算模型。结合路试实验激励数据和驾驶室有限元声-固耦合模型,对驾驶室内噪声响度分布和响度结构板块贡献量进行计算,识别不同板材振动产生的辐射噪声分量对驾驶室内噪声品质频谱特性的影响。实验结果表明:相对于声压级,采用响度作为分析参数提高了驾驶室内噪声源识别精度,

  4. 自动识别环境下车辆的出行矩阵估计新方法%A New Method of OD Estimation Based On Automatic Vehicle Identification Data

    Institute of Scientific and Technical Information of China (English)

    孙剑; 冯羽

    2011-01-01

    鉴于以视频牌照识别系统为代表的车辆自动识别(automatic vehicle identification,AVI)技术在我国逐步应用的现实,提出了利用AVI检测信息估计高精度车辆起讫点矩阵(OD- matrix)的新方法.该方法首先将检测的车辆信息分为4类(起讫点已知、起点或终点及部分路径已知、仅知起点或终点、仅知部分路径),然后利用第1类信息根据AVI检测误差直接扩样更新基础OD矩阵;利用第2,3,4类信息,参照粒子滤波算法思想,基于贝叶斯估计理论修正更新路段-路径流量关系,进而用蒙特卡罗随机过程确定可能路径以及OD;最后根据AVI获得的路径流量信息反向验算校正OD.根据上海市目前视频牌照识别系统的应用现状,选择以南北高架快速路为研究对象,根据牌照识别系统检测的动态车辆信息,对布设9个视频检测器的南北高架沿线17个出入口的OD进行了估计应用.结果表明,在路网仿真模型误差≤15%、AVI设施覆盖率为27.2%以及检测误差在10%的前提下,运用本方法,OD估计的总体平均相对误差仅为11.09%.该方法能充分利用AVI检测的个体车辆不完整路径信息,且计算效率高,可满足实际动态交通管理的需求.%With the development and application of video license plate recognition system which represented the automatic vehicle identification (AVI) technologies in China,a novel high resolution OD estimation method was proposed based on AVI detector information. 4 detected categories (Ox + Dy, Ox/Dy + (8), Ox/Dy、 P(8)) were divided at the first step. Then the initial OD matrix was updated by using the Ox + Dy sample information considering the AVI detector errors. Referenced by particle filter, the link-path relationship data were revised by using the last 3 categories information based on Bayesian inference and the possible trajectory and OD were determined with the Monte Carlo random process. Then the OD was corrected

  5. Applications of unmanned aerial vehicles in intertidal reef monitoring.

    Science.gov (United States)

    Murfitt, Sarah L; Allan, Blake M; Bellgrove, Alecia; Rattray, Alex; Young, Mary A; Ierodiaconou, Daniel

    2017-08-31

    Monitoring of intertidal reefs is traditionally undertaken by on-ground survey methods which have assisted in understanding these complex habitats; however, often only a small spatial footprint of the reef is observed. Recent developments in unmanned aerial vehicles (UAVs) provide new opportunities for monitoring broad scale coastal ecosystems through the ability to capture centimetre resolution imagery and topographic data not possible with conventional approaches. This study compares UAV remote sensing of intertidal reefs to traditional on-ground monitoring surveys, and investigates the role of UAV derived geomorphological variables in explaining observed intertidal algal and invertebrate assemblages. A multirotor UAV was used to capture <1 cm resolution data from intertidal reefs, with on-ground quadrat surveys of intertidal biotic data for comparison. UAV surveys provided reliable estimates of dominant canopy-forming algae, however, understorey species were obscured and often underestimated. UAV derived geomorphic variables showed elevation and distance to seaward reef edge explained 19.7% and 15.9% of the variation in algal and invertebrate assemblage structure respectively. The findings of this study demonstrate benefits of low-cost UAVs for intertidal monitoring through rapid data collection, full coverage census, identification of dominant canopy habitat and generation of geomorphic derivatives for explaining biological variation.

  6. Ground Wars

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Kleis

    Political campaigns today are won or lost in the so-called ground war--the strategic deployment of teams of staffers, volunteers, and paid part-timers who work the phones and canvass block by block, house by house, voter by voter. Ground Wars provides an in-depth ethnographic portrait of two...... infrastructures that utilize large databases with detailed individual-level information for targeting voters, and armies of dedicated volunteers and paid part-timers. Nielsen challenges the notion that political communication in America must be tightly scripted, controlled, and conducted by a select coterie...... of professionals. Yet he also quashes the romantic idea that canvassing is a purer form of grassroots politics. In today's political ground wars, Nielsen demonstrates, even the most ordinary-seeming volunteer knocking at your door is backed up by high-tech targeting technologies and party expertise. Ground Wars...

  7. Microcontroller based ground weapon control system(Short Communication

    Directory of Open Access Journals (Sweden)

    M. Sankar Kishore

    2001-10-01

    Full Text Available Armoured vehicles and tanks generally consist of high resolution optical (both infrared and visible and display systems for recognition and identification of the targets. Different weapons/articles to engage the targets may be present. A fire control system (FCS controls all the above systems, monitors the status of the articles present and passes the information to the display system. Depending upon the health and availability of the articles, the FCS selects and fires the articles. Design and development of ground control unit which is the heart of the FCS, both in hardware and software, has been emphasised. The system has been developed using microcontroller and software developed in ASM 51 language. The system also has a facility to test all the systems and articles as initial power on condition. From the safety point of view, software and hardware interlocks have been provided in the critical operations, like firing sequence. "

  8. Assessment of future natural gas vehicle concepts

    Science.gov (United States)

    Groten, B.; Arrigotti, S.

    1992-10-01

    The development of Natural Gas Vehicles is progressing rapidly under the stimulus of recent vehicle emission regulations. The development is following what can be viewed as a three step progression. In the first step, contemporary gasoline or diesel fueled automobiles are retrofitted with equipment enabling the vehicle to operate on either natural gas or standard liquid fuels. The second step is the development of vehicles which utilize traditional internal combustion engines that have been modified to operate exclusively on natural gas. These dedicated natural gas vehicles operate more efficiently and have lower emissions than the dual fueled vehicles. The third step is the redesigning, from the ground up, of a vehicle aimed at exploiting the advantages of natural gas as an automotive fuel while minimizing its disadvantages. The current report is aimed at identifying the R&D needs in various fuel storage and engine combinations which have potential for providing increased efficiency, reduced emissions, and reductions in vehicle weight and size. Fuel suppliers, automobile and engine manufacturers, many segments of the natural gas and other industries, and regulatory authorities will influence or be affected by the development of such a third generation vehicle, and it is recommended that GRI act to bring these groups together in the near future to begin, developing the focus on a 'designed-for-natural-gas' vehicle.

  9. Heavy Duty Vehicle Futures Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Askin, Amanda Christine; Barter, Garrett.; West, Todd H.; Manley, Dawn Kataoka

    2014-05-01

    This report describes work performed for an Early Career Research and Development project. This project developed a heavy-duty vehicle (HDV) sector model to assess the factors influencing alternative fuel and efficiency technology adoption. This model builds on a Sandia light duty vehicle sector model and provides a platform for assessing potential impacts of technological advancements developed at the Combustion Research Facility. Alternative fuel and technology adoption modeling is typically developed around a small set of scenarios. This HDV sector model segments the HDV sector and parameterizes input values, such as fuel prices, efficiencies, and vehicle costs. This parameterization enables sensitivity and trade space analyses to identify the inputs that are most associated with outputs of interest, such as diesel consumption and greenhouse gas emissions. Thus this analysis tool enables identification of the most significant HDV sector drivers that can be used to support energy security and climate change goals.

  10. Application of Artificial Intelligent For Armour Vehicle Detection Using Digital Image Processing For Aerial Application

    Directory of Open Access Journals (Sweden)

    Kamaruddin Abd Ghani

    2011-01-01

    Full Text Available This paper will presents a new automatic target recognition (ATR algorithm to detect targets such as battle tanks and armoured personal carriers especially that been used by Malaysia Armed Forces from air-to- ground scenario. Numerous friendly-fire incidents justify the need for identification of armour vehicle in both command control and weapon systems. Rapid and reliable identification of the targets at maximum surveillance is a challenging problem. In this paper work, the reliable method to segregate the potential target from the background scene such as Fourier Transform is applied before the extracted target will be process in order to get the detail of edges and boundaries using Hough Transform. The edges will provide sufficient information for the system to generate training data for Artificial Neural Network simulation to recognize the potential target image.

  11. Design of vehicle overload detection system based on geophone

    Science.gov (United States)

    Hu, Siquan; Kong, Min; She, Chundong

    2017-08-01

    A vehicle overload detection system is proposed based on geophone. Under normal circumstances, when overloaded vehicles and ordinary vehicles pass through the road, the amplitude of the ground vibration will be different, and the geophone sensor can detect tiny vibrations of the ground. The system includes information acquisition module, signal conditioning module and wireless transmission module. The collected vibration data is transmitted through the wireless transmission module to the background, and the SVM algorithm is used to classify the information and determine whether the vehicle is overloaded. Experiments show that the system can detect overload accurately.

  12. Surface and sub-surface anatomy of the landscape: integrating Unmanned Aerial Vehicle Structure from Motion (UAV-SfM) and Ground Penetrating Radar (GRP) to investigate sedimentary features in the field. - an example from NW Australia

    Science.gov (United States)

    Callow, Nik; Leopold, Matthias; May, Simon Matthias

    2015-04-01

    Geomorphology is confronted by the challenge of reconstructing landscape features at appropriate scales, resolution and accuracy, that allows meaningful analysis of environmental processes and their implications. Field geomorphology offers a discrete snapshot (i.e. one or two field campaigns) to reconstruct how features have changed, evolved or responded over time. We explore the application of an emerging photogrammetry technique called Structure-from-Motion (SfM), which uses multiple photographs of the same feature (but taken at different locations) to create high-accuracy three-dimensional models of surface of sedimentary fans formed by extreme wave events. This approach is complimented by investigation of the sub-surface morphology using Ground Penetrating Radar (GPR). Using an UAV "octocopter", we captured 1208 photos with a DSLR camera (Canon EoS-M) at the height of 50m with a ground pixel resolution of 9mm, above a cyclone wash-over fan in the Exmouth Gulf (Western Australia) that measured about 500m inland by 300m wide. Based on 38 ground control point targets (with between 4 and 45 individual photographs per target) the SfM surface had an absolute total (XYZ) accuracy of 51mm (39mm X, 29mm Y and 14mm Y), based on RTK-DGPS surveying from a local ground reference station (with an absolute AUSPOS accuracy of 57mm X, 6mm Y, 50mm Z to AHD) and an overall relative point accuracy of 7mm. A sparse point cloud of over 5.5 million data points was generated using only points with a reconstruction accuracy of RGB colour of each XYZ pixel) using K-Means clustering within Python. The output was then manually classified into ground and non-ground points, and the geostatistical analyst functionality of ArcGIS used to produce a final bare-earth DEM. This approach has allowed the study team to economically collect an unprecedented high-resolution and accuracy topographic model of this feature to compliment on-ground sediment, geophysics and dating work to analyse the

  13. Vehicle Traffic Congestion Estimation Based on RFID

    OpenAIRE

    Al-Naima, Fawzi M.; Hamd, Hassan A.

    2012-01-01

    Due to the proliferation in the number of vehicles on the road, traffic problems are bound to exist. Therefore, the use of Intelligent Transportation Systems (ITS) has become mandatory for obtaining traffic information from roads. Radio Frequency Identification (RFID) technology has been used to obtain vehicles’ IDs (tag ID) from RFID readers and to collect traffic information in real‐time. This paper proposes a simulation system for the Vehicle Traffic Congestion Estimation (VTCE) based on R...

  14. Ground-based observations of the beta Cephei CoRoT main target HD 180642: abundance analysis and mode identification

    CERN Document Server

    Briquet, M; Morel, T; Aerts, C; De Cat, P; Mathias, P; Lefever, K; Miglio, A; Poretti, E; Martin-Ruiz, S; Paparo, M; Rainer, M; Carrier, F; Gutiérrez-Soto, J; Valtier, J C; Benko, J M; Bognár, Z; Niemczura, E; Amado, P J; Suárez, J C; Moya, A; Rodriguez-Lopez, C; Garrido, R

    2009-01-01

    The known beta Cephei star HD 180642 was observed by the CoRoT satellite in 2007. From the very high-precision light curve, its pulsation frequency spectrum could be derived for the first time (Degroote and collaborators). In this paper, we obtain additional constraints for forthcoming asteroseismic modeling of the target. Our results are based on both extensive ground-based multicolour photometry and high-resolution spectroscopy. We determine T_eff = 24 500+-1000 K and log g = 3.45+-0.15 dex from spectroscopy. The derived chemical abundances are consistent with those for B stars in the solar neighbourhood, except for a mild nitrogen excess. A metallicity Z = 0.0099+-0.0016 is obtained. Three modes are detected in photometry. The degree l is unambiguously identified for two of them: l = 0 and l = 3 for the frequencies 5.48694 1/d and 0.30818 1/d, respectively. The radial mode is non-linear and highly dominant with an amplitude in the U-filter about 15 times larger than the strongest of the other modes. For th...

  15. Movable Ground Based Recovery System for Reuseable Space Flight Hardware

    Science.gov (United States)

    Sarver, George L. (Inventor)

    2013-01-01

    A reusable space flight launch system is configured to eliminate complex descent and landing systems from the space flight hardware and move them to maneuverable ground based systems. Precision landing of the reusable space flight hardware is enabled using a simple, light weight aerodynamic device on board the flight hardware such as a parachute, and one or more translating ground based vehicles such as a hovercraft that include active speed, orientation and directional control. The ground based vehicle maneuvers itself into position beneath the descending flight hardware, matching its speed and direction and captures the flight hardware. The ground based vehicle will contain propulsion, command and GN&C functionality as well as space flight hardware landing cushioning and retaining hardware. The ground based vehicle propulsion system enables longitudinal and transverse maneuverability independent of its physical heading.

  16. 基于车致振动响应的铁路桥梁损伤位置识别%Damage Location Identification of Railway Bridge Based on Vibration Response Caused by Vehicles

    Institute of Scientific and Technical Information of China (English)

    付春雨; 单德山; 李乔

    2011-01-01

    In order to detect the bridge damage caused by train load, a method for damage location identification was put forward based on acceleration response caused by vehicles. With this method, structural damage vulnerability is firstly analyzed to find out vulnerable sections. From the damage states of these sections, several subdomains are selected from the time domain when a train is running. In every subdomain, the damage states of the studied sections are supposed to remain the same, and damage location identification of every subdomain is divided into 2 hierarchies, a model for damage location identification is established for each hierarchy by using the acceleration history data as damage indexes, sample sets are optimized from several viewpoints, and support vector machine is taken as a tool of classification. The analysis results for a continuous girder show that by taking the correlation between structural damage states and train load into account, this method can detect the vulnerable sections in the time subdomains when damage is prone to appear, and obtain the preferable results of damage location identification with only a little change under low-level noise disturbance.%为识别列车荷载引起的桥梁结构损伤,基于车致振动的加速度响应,提出了一种损伤位置识别方法.该方法通过结构易损性分析,确定结构易损的部位,并根据易损部位的损伤状态,从列车行驶的时间区域中选择若干子区域;然后,假设在每一个子区域内特定易损部位的损伤状态保持不变,将损伤位置识别分为2个层次进行,每一层次均以加速度时程数据构建损伤指标,从多个角度优化样本库,并采用支持向量机作为分类工具,建立损伤位置识别模型.对一连续梁的实例分析表明:该方法能够考虑结构状态与列车荷载的相关性,在损伤最易出现的时间子区域内,对易损部位进行损伤识别,可获得较好的损伤位置识别结果;且

  17. Canadair CL-227 Remotely Piloted Vehicle

    Science.gov (United States)

    Clark, Andrew S.

    1983-08-01

    The Canadair CL-227 is a rotary winged Remotely Piloted Vehicle (RPV) intended initially as the air-vehicle for a medium range battlefield surveillance and target acquisition system. The concept on which this vehicle is based brings together in-house expertise as a designer and manufacturer of surveillance drones (AN-USD-50l -MIDGE-) with experience in rigid rotor technology from the CL-84 tilt wing VTOL program. The vehicle is essentially modular in design with a power module containing the engine, fuel and related systems, a rotor module containing the two counter-rotating rotors and control actuators, and a control module containing the autopilot, data link and sensor system. The vehicle is a true RPV (as opposed to a drone) as it is flown in real time by an operator on the ground and requires relatively little skill to pilot.

  18. 情境植入视角下第三人称指称形式的所指定位%Reference Identification of Third Person Referential Forms Based on Grounding Theory

    Institute of Scientific and Technical Information of China (English)

    李洁红; 王晓雷

    2014-01-01

    Because third person is not the direct participant in speech communication , it is difficult to identify the referential forms of the third person.This study, based on Langacker's grounding theory, explains and explores the cognitive mechanism relevant to the reference identification of third person referential forms in the daily languages of both Chinese and English .The result of the study shows that the third person referential forms change at form , seman-tic and category level .To get a correct identification of the third person referential forms , the participants of the com-munication have to build a discourse framework and process it cognitively .%由于第三人称不是言语交际的直接参与者,其指称形式的所指定位存在诸多复杂的情况。基于Lan-gacker的情境植入理论,分析探讨英汉日常语言中第三人称指称形式所指定位的认知规律。研究发现,英汉日常语言中第三人称指称形式的所指会在形态、语义及范畴层次等方面发生变化,其具体定位需通过话语参与者共建话语框架并进行认知加工才能得以完成。

  19. Smart mobile in-vehicle systems next generation advancements

    CERN Document Server

    Abut, Huseyin; Takeda, Kazuya; Hansen, John

    2014-01-01

    This is an edited collection by world-class experts, from diverse fields, focusing on integrating smart in-vehicle systems with human factors to enhance safety in automobiles. The book presents developments on road safety, in-vehicle technologies and state-of-the art systems. Includes coverage of DSP technologies in adaptive automobiles, algorithms and evaluation of in-car communication systems, driver-status monitoring and stress detection, in-vehicle dialogue systems and human-machine interfaces, challenges in video and audio processing for in-vehicle products, multi-sensor fusion for driver identification and vehicle to infrastructure wireless technologies.

  20. Absolute localization of ground robots by matching LiDAR and image data in dense forested environments

    Science.gov (United States)

    Hussein, Marwan; Renner, Matthew; Iagnemma, Karl

    2014-06-01

    A method for the autonomous geolocation of ground vehicles in forest environments is discussed. The method provides an estimate of the global horizontal position of a vehicle strictly based on finding a geometric match between a map of observed tree stems, scanned in 3D by Light Detection and Ranging (LiDAR) sensors onboard the vehicle, to another stem map generated from the structure of tree crowns analyzed from high resolution aerial orthoimagery of the forest canopy. Extraction of stems from 3D data is achieved by using Support Vector Machine (SVM) classifiers and height above ground filters that separate ground points from vertical stem features. Identification of stems from overhead imagery is achieved by finding the centroids of tree crowns extracted using a watershed segmentation algorithm. Matching of the two maps is achieved by using a robust Iterative Closest Point (ICP) algorithm that determines the rotation and translation vectors to align the datasets. The alignment is used to calculate the absolute horizontal location of the vehicle. The method has been tested with real-world data and has been able to estimate vehicle geoposition with an average error of less than 2 m. It is noted that the algorithm's accuracy performance is currently limited by the accuracy and resolution of aerial orthoimagery used. The method can be used in real-time as a complement to the Global Positioning System (GPS) in areas where signal coverage is inadequate due to attenuation by the forest canopy, or due to intentional denied access. The method has two key properties that are significant: i) It does not require a priori knowledge of the area surrounding the robot. ii) Uses the geometry of detected tree stems as the only input to determine horizontal geoposition.

  1. Vehicle Development Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Supports the development of prototype deployment platform vehicles for offboard countermeasure systems.DESCRIPTION: The Vehicle Development Laboratory is...

  2. Vehicle Development Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Supports the development of prototype deployment platform vehicles for offboard countermeasure systems. DESCRIPTION: The Vehicle Development Laboratory is...

  3. Seamless Mode Switching for Shared Control of Semiautonomous Vehicles Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Whether it be a crew station, the Shuttle Remote Manipulator System (SRMS), an unmanned ground rover (UGV) or air vehicle (UAV), or teams thereof, the controllers...

  4. 零序电流比例增量法在小电流接地故障选线中的应用%Application of the zero sequence current incremental ratio method in small current grounding fault line identification

    Institute of Scientific and Technical Information of China (English)

    王新超; 张玉海

    2011-01-01

    通过对小电流接地系统电路特点的深入研究发现,故障后在各条支路上流动的零序电容电流只决定于系统的零序电压与支路的对地电容,而不决定于故障发生在哪条支路上,且故障发生前后的支路对地电容几乎不变.非故障支路上流动的是零序电容电流,故障支路上流动着的是零序电容电流与接地电流的叠加.正是基于这一分析结果提出了一种零序电流比例增量法,定义了基准零序电流比例系数序列和参考基准电流分度系数等中间参量.其工作特点是可以剥离各支路的零序电容电流,并通过比较剥离后各支路增量的最大者,即故障支路.进一步的仿真表明该法稳定可靠,具有良好的适应能力.该法对其他判别法提高判别精度也有帮助.%Intensive studying on the characteristics of small current grounding system circuit finds that the zero sequence capacitive current in each powerline depends merely on the system's zero-sequence voltage and powerline-to-ground capacitances when a single-phase grounding failure happens, and does not depend on that the failure occurrs in which powerline, and the powerline-to-ground capacitances are almost unchanged before or after the failure. Non-fault powerline currents are zero sequence capacitive currents, but fault powerline current is the zero sequence capacitance current plus the grounding current. Based on the results of this analysis a zero sequence current proportion incremental method is given, which defines some medium-parameters such as the zero sequence current ratio standard coefficient array and reference current gauge coefficient. Characteristics of the method is that zero-sequence capacitive currents are stripped, and the maximum increment of the powerline is found, which is the fault one. Further simulations show that the method is stable and reliable, with good adaptability. The method can also improve identification accuracy of other

  5. Simple system for locating ground loops.

    Science.gov (United States)

    Bellan, P M

    2007-06-01

    A simple low-cost system for rapid identification of the cables causing ground loops in complex instrumentation configurations is described. The system consists of an exciter module that generates a 100 kHz ground loop current and a detector module that determines which cable conducts this test current. Both the exciter and detector are magnetically coupled to the ground circuit so there is no physical contact to the instrumentation system under test.

  6. Joint Light Tactical Vehicle (JLTV): Background and Issues for Congress

    Science.gov (United States)

    2017-01-10

    3 Information in this section is taken from the Army Product Manager , Joint Light Tactical Vehicle website, http://peocscss.tacom.army.mil...10 Information in this section, unless otherwise noted is taken from a briefing from the Project Manager ...Joint Light Tactical Vehicle (JLTV): Background and Issues for Congress Andrew Feickert Specialist in Military Ground Forces January 10, 2017

  7. Medium Tactical Vehicle Underbody Armor Development

    Science.gov (United States)

    2010-06-01

    death through means of mechanical trauma resulting from blast, fragmentation, and secondary projectiles. IEDs can also be implemented to incapacitate...tests. Wood cribbing was used to level the vehicle, creating a standoff distance from the ground to the crew compartment equal to that of an actual

  8. Forecasting Vehicle Mobility in Remote Areas -An Aid to Military Vehicle Design

    Directory of Open Access Journals (Sweden)

    Tej Paul

    1985-01-01

    Full Text Available Military vehicles are designed for off the road mobility. These are liable for deployment on varying ground conditions. Terrain parameters effecting vehicle systems design are listed. To avoid large scale measurement of terrain parameters, use of physiographic maps in forecasting these parameters has been suggested. Field tests to ascertain the similarity of soil strength parameter between the similar physiographic terrain units, called land facets were conducted and the tests confirmed the usefulness of the technique.

  9. Deploying Electronic Roadside Vehicle Identification Technology to ...

    African Journals Online (AJOL)

    memory. An RFID reader transmits an encoded radio signal to interrogate the tag. The tag receives ... be only a unique tag serial number, or may be product related ... GPS: This is Global Positioning ... used to show the eventual real effects of.

  10. 'Grounded' Politics

    DEFF Research Database (Denmark)

    Schmidt, Garbi

    2012-01-01

    play within one particular neighbourhood: Nørrebro in the Danish capital, Copenhagen. The article introduces the concept of grounded politics to analyse how groups of Muslim immigrants in Nørrebro use the space, relationships and history of the neighbourhood for identity political statements....... The article further describes how national political debates over the Muslim presence in Denmark affect identity political manifestations within Nørrebro. By using Duncan Bell’s concept of mythscape (Bell, 2003), the article shows how some political actors idealize Nørrebro’s past to contest the present...

  11. 基于纹理特征与BP神经网络的运动车辆识别%Motor Vehicle Identification Based on Texture Feature and BP Neural Network

    Institute of Scientific and Technical Information of China (English)

    张秀林; 王浩全; 刘玉; 安然

    2013-01-01

    在Gabor小波滤波器组与图像卷积值作为特征向量达到很高识别率的基础上,提出了一种特征值加权的Gabor小波纹理特征的提取方法.首先Gabor小波函数与纹理图像做卷积,然后加权处理尺度各不相同和方向各不相同的的卷积值,最后将均值和方差看作它们的特征向量,该方法使特征维数有所降低,并利用BP神经网络进行训练和仿真,实现运动车辆纹理图像的自动分类,达到运动图像的识别.实验结果表明此算法有效降低了图像的识别错误,增强了稳健性,对质量差的图像能够有效识别.%On the basis of the Gabor wavelet filter group and the image convolution values as the feature vector can achieve a high recognition rate,a feature-weighted method of extracting texture is proposed.Firstly,Gabor wavelet function and texture image deconvolution.Then,the convolution values are extracted in different scales and different directions.After making the weighting process,taking its mean and variance as the characteristic vector,which greatly reduces the feature dimension.Finally,BP neural network is used to making training and simulation,in order to achieving the automatic classification of texture images of moving vehicles and the identification of moving images.The experimental results show that this algorithm can effectively reduce the recognition error of the image and enhance the robustness.To the poor quality images,it can make the effective recognition.

  12. An Experimental Study on the Friction States Identification of Seal Ring in Vehicle Transmission Device%车辆传动装置密封环摩擦状态辨识的试验研究

    Institute of Scientific and Technical Information of China (English)

    宫燃; 葛如海; 张学荣; 徐宜

    2013-01-01

    For exploring the cause of the premature failure of seal ring in vehicle transmission device and understanding the rule of transform in sealing friction states and its effects on sealing performance, the friction coefficient versus operating parameter curves, i. e. f-G curves are obtained by a measurement on a sealing performance test rig for transmission device, the changing rule of sealing friction states at different oil temperature conditions is studied, and the effects of friction state transform on sealing performance are analyzed. The results indicate that under the set test conditions, the transforming rule of friction states of seal ring and its identification features can be revealed by f-G curves; But the change of friction states of seal ring only has limited effects on seal leakage while the influences of the temperature rise of seal ring are more apparent.%为探讨车辆传动装置的密封环早期失效的原因,掌握密封摩擦状态转变规律及其对密封性能的影响,利用传动装置密封性能试验台,测得摩擦因数-工况参数曲线(即f-G曲线),研究了不同油温条件下密封摩擦状态的变化规律,分析了密封环摩擦状态转变对密封性能的影响.结果表明,在设定的试验条件下,通过f-G曲线可揭示密封环在高速重载工况下摩擦状态转变规律及其辨识特征;密封环摩擦状态的转变对泄漏量的影响有限,而对密封环温升的影响较为显著.

  13. Spectroscopic Parameters for Ozone and its Isotopes: Current Status, Prospects for Improvement, and the Identification of 16O16O17O and O-16O-16O-17 and O-16O-17O-16 Lines in Infrared Ground-Based and Stratospheric Solar Absorption Spectra

    Science.gov (United States)

    Rinsland, C. P.; Flaud, J.-M.; Goldman, A.; Perrin, A.; Camy-Peyret, C.; Smith, M. A. H.; Devi, V. Malathy; Benner, D. C.; Barbe, A.; Stephens, T. M.; hide

    1998-01-01

    We describe the updates to the spectroscopic parameters of ozone and its isotopes in the 1996 HITRAN compilation. Recent published studies not included in HITRAN are also summarized. Finally, we report the identification of infrared lines of the v(sub 3) bands of O-16O-16O-17 and O-16O-17O-16 in high-resolution solar spectra recorded by stratospheric balloon-borne and ground-based Fourier transform spectrometers.

  14. Reduction of global effects on vehicles after IED detonations

    Institute of Scientific and Technical Information of China (English)

    V.DENEFELD; N.HEIDER; A.HOLZWARTH; A.S€ATTLER; M.SALK

    2014-01-01

    Global effects caused by the detonation of an IED near a military vehicle induce subsequent severe acceleration effects on the vehicle occupants. Two concepts to minimize these global effects were developed, with the help of a combined method based on a scaled experimental technology and numerical simulations. The first concept consists in the optimization of the vehicle shape to reduce the momentum transfer and thus the occupant loading. Three scaled V-shaped vehicles with different ground clearances were built and compared to a reference vehicle equipped with a flat floor. The second concept, called dynamic impulse compensation (DIC), is based on a momentum compensation technique. The principal possibility of this concept was demonstrated on a scaled vehicle. In addition, the numerical simulations have been performed with generic full size vehicles including dummy models, proving the capability of the DIC technology to reduce the occupant loading.

  15. Innovative control systems for tracked vehicle platforms

    CERN Document Server

    2014-01-01

     This book has been motivated by an urgent need for designing and implementation of innovative control algorithms and systems for tracked vehicles. Nowadays the unmanned vehicles are becoming more and more common. Therefore there is a need for innovative mechanical constructions capable of adapting to various applications regardless the ground, air or water/underwater environment. There are multiple various activities connected with tracked vehicles. They can be distributed among three main groups: design and control algorithms, sensoric and vision based in-formation, construction and testing mechanical parts of unmanned vehicles. Scientists and researchers involved in mechanics, control algorithms, image processing, computer vision, data fusion, or IC will find this book useful.

  16. Collaboration for Land, Air, Sea, and Space Vehicles: Developing the Common Ground in Vehicle Dynamics, System Identification, Control, and Handling Qualities (La collaboration dans le domaine des vehicules terrestres, aeriens, maritimes et spatiaux: L’etablissement d’une approche commune de la dynamique des vehicules, l’identification des systemes, et les qualite’s de controle et de pilotage)

    Science.gov (United States)

    2002-11-01

    et à mesure du déroulement des réunions, une approche commune s’est dégagée. Des discussions particulièrement fructueuses concernant les...SSBN, SSN, SSK Ambulance Cruise, SSM Special operation Car, Utility SAM UUV, ROV Rail Tactical ballistic Torpedo Specialised: Rotary wing: Air...conversion for mission requirements, e.g., a truck used as a troop or cargo carrier , wrecker, fuel hauler, ambulance , etc. Air: Fuselage stretch

  17. 41 CFR 109-38.204-50 - Records of exempted motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... motor vehicles. 109-38.204-50 Section 109-38.204-50 Public Contracts and Property Management Federal... AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 38-MOTOR EQUIPMENT MANAGEMENT 38.2-Registration, Identification, and Exemptions § 109-38.204-50 Records of exempted motor vehicles. The Director, Office...

  18. Vehicle/guideway interaction in maglev systems

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Y.; Chen, S.S.; Rote, D.M.

    1992-03-01

    Dynamic interactions between the vehicle and guideway in a high-speed ground transportation system based on magnetically levitated (maglev) vehicles were studied, with an emphasis on the effects of vehicle and guideway parameters. Two dynamic models for the vehicle are presented. In one model, the vehicle is considered to be a moving force traveling at various speeds on a simply supported single- or two-span beam. In the second model, the vehicle is considered to be one-dimensional and has two degrees of freedom; this model consists of the primary and secondary suspensions of the vehicle, with lumped masses, linear springs, and dampings. The Bernoulli-Euler beam equation is used to model the characteristics of a flexible guideway, and the guideway synthesis is based on modal analysis. Analyses were performed to gain an understanding of response characteristics under various loading conditions and to provide benchmark data for verification of existing comprehensive computer programs and some basic design guidelines for maglev systems. Finally, the German Transrapid maglev system was evaluated. 19 ref.

  19. System Identification

    NARCIS (Netherlands)

    Keesman, K.J.

    2011-01-01

    Summary System Identification Introduction.- Part I: Data-based Identification.- System Response Methods.- Frequency Response Methods.- Correlation Methods.- Part II: Time-invariant Systems Identification.- Static Systems Identification.- Dynamic Systems Identification.- Part III: Time-varying

  20. A Comparative Study Based on the Least Square Parameter Identification Method for State of Charge Estimation of a LiFePO4 Battery Pack Using Three Model-Based Algorithms for Electric Vehicles

    OpenAIRE

    Taimoor Zahid; Weimin Li

    2016-01-01

    Battery energy storage management for electric vehicles (EV) and hybrid EV is the most critical and enabling technology since the dawn of electric vehicle commercialization. A battery system is a complex electrochemical phenomenon whose performance degrades with age and the existence of varying material design. Moreover, it is very tedious and computationally very complex to monitor and control the internal state of a battery’s electrochemical systems. For Thevenin battery model we establishe...

  1. Exploring Sound Signature for Vehicle Detection and Classification Using ANN

    Directory of Open Access Journals (Sweden)

    Jobin George

    2013-06-01

    Full Text Available This paper attempts to explore the possibility of using sound signatures for vehicle detection andclassification purposes. Sound emitted by vehicles are captured for a two lane undivided road carryingmoderate traffic. Simultaneous arrival of different types vehicles, overtaking at the study location, sound ofhorns, random but identifiable back ground noises, continuous high energy noises on the back ground arethe different challenges encountered in the data collection. Different features were explored out of whichsmoothed log energy was found to be useful for automatic vehicle detection by locating peaks. Mel-frequency ceptral coefficients extracted from fixed regions around the detected peaks along with themanual vehicle labels are utilised to train an Artificial Neural Network (ANN. The classifier for fourbroad classes heavy, medium, light and horns was trained. The ANN classifier developed was able topredict categories well.

  2. Networked unattented ground sensors assesment

    Science.gov (United States)

    Bouguereau, Julien; Gattefin, Christian; Dupuy, Gilles

    2003-09-01

    Within the framework of the NATO AC 323 / RTO TG 25 group, relating to advanced concepts of acoustic and seismic technology for military applications, Technical Establishment of Bourges welcomed and organized a joint campaign of experiment intending to demonstrate the interest of a networked unattented ground sensors for vehicles detection and tracking in an area defense context. Having reminded the principle of vehicles tracking, this paper describes the progress of the test campaign and details particularly sensors and participants deployment, the solution of interoperability chosen by the group and the instrumentation used to acquire, network, process and publish in real-time data available during the test: meteorological data, trajectography data and targets detection reports data. Finally, some results of the campaign are presented.

  3. Fuzzy-hybrid land vehicle driveline modelling based on a moving window subtractive clustering approach

    Science.gov (United States)

    Economou, J. T.; Knowles, K.; Tsourdos, A.; White, B. A.

    2011-02-01

    In this article, the fuzzy-hybrid modelling (FHM) approach is used and compared to the input-output system Takagi-Sugeno (TS) modelling approach which correlates the drivetrain power flow equations with the vehicle dynamics. The output power relations were related to the drivetrain bounded efficiencies and also to the wheel slips. The model relates also to the wheel and ground interactions via suitable friction coefficient models relative to the wheel slip profiles. The wheel slip had a significant efficiency contribution to the overall driveline system efficiency. The peak friction slip and peak coefficient of friction values are known a priori during the analysis. Lastly, the rigid body dynamical power has been verified through both simulation and experimental results. The mathematical analysis has been supported throughout the paper via experimental data for a specific electric robotic vehicle. The identification of the localised and input-output TS models for the fuzzy hybrid and the experimental data were obtained utilising the subtractive clustering (SC) methodology. These results were also compared to a real-time TS SC approach operating on periodic time windows. This article concludes with the benefits of the real-time FHM method for the vehicle electric driveline due to the advantage of both the analytical TS sub-model and the physical system modelling for the remaining process which can be clearly utilised for control purposes.

  4. DynaMax+ ground-tracking algorithm

    Science.gov (United States)

    Smock, Brandon; Gader, Paul; Wilson, Joseph

    2011-06-01

    In this paper, we propose a new method for performing ground-tracking using ground-penetrating radar (GPR). Ground-tracking involves identifying the air-ground interface, which is usually the dominant feature in a radar image but frequently is obscured or mimicked by other nearby elements. It is an important problem in landmine detection using vehicle-mounted systems because antenna motion, caused by bumpy ground, can introduce distortions in downtrack radar images, which ground-tracking makes it possible to correct. Because landmine detection is performed in real-time, any algorithm for ground-tracking must be able to run quickly, prior to other, more computationally expensive algorithms for detection. In this investigation, we first describe an efficient algorithm, based on dynamic programming, that can be used in real-time for tracking the ground. We then demonstrate its accuracy through a quantitative comparison with other proposed ground-tracking methods, and a qualitative comparison showing that its ground-tracking is consistent with human observations in challenging terrain.

  5. Electric Vehicle Charging Modeling

    OpenAIRE

    Grahn, Pia

    2014-01-01

    With an electrified passenger transportation fleet, carbon dioxide emissions could be reduced significantly depending on the electric power production mix. Increased electric power consumption due to electric vehicle charging demands of electric vehicle fleets may be met by increased amount of renewable power production in the electrical systems. With electric vehicle fleets in the transportation system there is a need for establishing an electric vehicle charging infrastructure that distribu...

  6. Chemical Pollution from Transportation Vehicles

    Science.gov (United States)

    Starkman, Ernest S.

    1969-01-01

    Recent publicity on electrically powered vehicles notwithstanding, the gasoline engine will probably be the principal power plant for passenger cars for at least the next decade. Chemical pollutants discharged by the gasoline engine are now under partial control. Motor cars of 1968 and 1969 model discharge only about 30 percent as much carbon monoxide and unburned hydrocarbons as do older models. In theory, carbon monoxide, unburned hydrocarbons and oxides of nitrogen ultimately can be completely removed from gasoline engine exhaust. In order to accomplish this it would be necessary to modify cars to operate satisfactorily on a lean mixture and perhaps to use a catalyst in the exhaust system. Present designs of gas turbines for aircraft and for future projected application to ground vehicles yield pollutants (except for smoke) at levels below those of gasoline engines for a decade to come. It has also been shown possible to eliminate smoke as well as odor from the gas turbine. Thus with proper effort it is feasible to reduce pollution of the atmosphere due to transportation to an acceptable level, even if electrically or alternatively powered vehicles cannot be developed for a decade. PMID:4183827

  7. Electric Vehicle Technician

    Science.gov (United States)

    Moore, Pam

    2011-01-01

    With President Obama's goal to have one million electric vehicles (EV) on the road by 2015, the electric vehicle technician should have a promising and busy future. "The job force in the car industry is ramping up for a revitalized green car industry," according to Greencareersguide.com. An electric vehicle technician will safely troubleshoot and…

  8. Road-rail vehicle

    NARCIS (Netherlands)

    Evers, J.J.M.

    2002-01-01

    A transport vehicle equipped with a number of first wheel sets, having wheels provided with tires, to which steering means and driving means, if any, are coupled to enable the transport vehicle to be moved over a road surface. The transport vehicle further comprises at least one second wheel set, ha

  9. Electric vehicles: Driving range

    Science.gov (United States)

    Kempton, Willett

    2016-09-01

    For uptake of electric vehicles to increase, consumers' driving-range needs must be fulfilled. Analysis of the driving patterns of personal vehicles in the US now shows that today's electric vehicles can meet all travel needs on almost 90% of days from a single overnight charge.

  10. Vehicle chassis monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Pisu, P.; Soliman, A.; Rizzoni, G. [Ohio State Univ., Columbus (United States). Center for Automotive Research

    2001-07-01

    Fault detection and isolation is becoming one of the most important aspects in vehicle control system design. In order to achieve this FDI schemes, particular vehicle subsystems integrated with a controller have been proposed. This paper introduces a new model-based fault detection and fault diagnosis method for monitoring the vehicle chassis performance. (orig.)

  11. Electric Vehicle Technician

    Science.gov (United States)

    Moore, Pam

    2011-01-01

    With President Obama's goal to have one million electric vehicles (EV) on the road by 2015, the electric vehicle technician should have a promising and busy future. "The job force in the car industry is ramping up for a revitalized green car industry," according to Greencareersguide.com. An electric vehicle technician will safely troubleshoot and…

  12. Automotive vehicle sensors

    Energy Technology Data Exchange (ETDEWEB)

    Sheen, S.H.; Raptis, A.C.; Moscynski, M.J.

    1995-09-01

    This report is an introduction to the field of automotive vehicle sensors. It contains a prototype data base for companies working in automotive vehicle sensors, as well as a prototype data base for automotive vehicle sensors. A market analysis is also included.

  13. Identification for automotive systems

    CERN Document Server

    Hjalmarsson, Håkan; Re, Luigi

    2012-01-01

    Increasing complexity and performance and reliability expectations make modeling of automotive system both more difficult and more urgent. Automotive control has slowly evolved from an add-on to classical engine and vehicle design to a key technology to enforce consumption, pollution and safety limits. Modeling, however, is still mainly based on classical methods, even though much progress has been done in the identification community to speed it up and improve it. This book, the product of a workshop of representatives of different communities, offers an insight on how to close the gap and exploit this progress for the next generations of vehicles.

  14. Passive Earth Entry Vehicle Landing Test

    Science.gov (United States)

    Kellas, Sotiris

    2017-01-01

    Two full-scale passive Earth Entry Vehicles (EEV) with realistic structure, surrogate sample container, and surrogate Thermal Protection System (TPS) were built at NASA Langley Research Center (LaRC) and tested at the Utah Test and Training Range (UTTR). The main test objective was to demonstrate structural integrity and investigate possible impact response deviations of the realistic vehicle as compared to rigid penetrometer responses. With the exception of the surrogate TPS and minor structural differences in the back shell construction, the two test vehicles were identical in geometry and both utilized the Integrated Composite Stiffener Structure (ICoSS) structural concept in the forward shell. The ICoSS concept is a lightweight and highly adaptable composite concept developed at NASA LaRC specifically for entry vehicle TPS carrier structures. The instrumented test vehicles were released from a helicopter approximately 400 m above ground. The drop height was selected such that at least 98% of the vehicles terminal velocity would be achieved. While drop tests of spherical penetrometers and a low fidelity aerodynamic EEV model were conducted at UTTR in 1998 and 2000, this was the first time a passive EEV with flight-like structure, surrogate TPS, and sample container was tested at UTTR for the purpose of complete structural system validation. Test results showed that at a landing vertical speed of approximately 30 m/s, the test vehicle maintained structural integrity and enough rigidity to penetrate the sandy clay surface thus attenuating the landing load, as measured at the vehicle CG, to less than 600 g. This measured deceleration was found to be in family with rigid penetrometer test data from the 1998 and 2000 test campaigns. Design implications of vehicle structure/soil interaction with respect to sample container and sample survivability are briefly discussed.

  15. A Critique of the Capacity of Strauss Grounded Theory for Prediction, Change, and Control in Organisational Strategy via a Grounded Theorisation of Leisure and Cultural Strategy

    Science.gov (United States)

    Bakir, Ali; Bakir, Vian

    2006-01-01

    In this paper we critique grounded theory's ability to fulfil its aim of offering a practical vehicle for prediction, change, and control as stipulated in grounded theory's original formulation by Glaser and Strauss, and later developed by Strauss. We do this through a case study approach, whereby we develop a grounded theory of leisure and…

  16. Space vehicle chassis

    Energy Technology Data Exchange (ETDEWEB)

    Judd, Stephen; Dallmann, Nicholas; Seitz, Daniel; Martinez, John; Storms, Steven; Kestell, Gayle

    2017-07-18

    A modular space vehicle chassis may facilitate convenient access to internal components of the space vehicle. Each module may be removable from the others such that each module may be worked on individually. Multiple panels of at least one of the modules may swing open or otherwise be removable, exposing large portions of the internal components of the space vehicle. Such chassis architectures may reduce the time required for and difficulty of performing maintenance or modifications, may allow multiple space vehicles to take advantage of a common chassis design, and may further allow for highly customizable space vehicles.

  17. Magnetic Launch Assist Vehicle-Artist's Concept

    Science.gov (United States)

    1999-01-01

    This artist's concept depicts a Magnetic Launch Assist vehicle clearing the track and shifting to rocket engines for launch into orbit. The system, formerly referred as the Magnetic Levitation (MagLev) system, is a launch system developed and tested by Engineers at the Marshall Space Flight Center (MSFC) that could levitate and accelerate a launch vehicle along a track at high speeds before it leaves the ground. Using an off-board electric energy source and magnetic fields, a Magnetic Launch Assist system would drive a spacecraft along a horizontal track until it reaches desired speeds. The system is similar to high-speed trains and roller coasters that use high-strength magnets to lift and propel a vehicle a couple of inches above a guideway. A full-scale, operational track would be about 1.5-miles long, capable of accelerating a vehicle to 600 mph in 9.5 seconds, and the vehicle would then shift to rocket engines for launch into orbit. The major advantages of launch assist for NASA launch vehicles is that it reduces the weight of the take-off, the landing gear, the wing size, and less propellant resulting in significant cost savings. The US Navy and the British MOD (Ministry of Defense) are planning to use magnetic launch assist for their next generation aircraft carriers as the aircraft launch system. The US Army is considering using this technology for launching target drones for anti-aircraft training.

  18. Advanced Vehicle and Power Initiative

    Science.gov (United States)

    2010-07-29

    bases.) Qualifying advanced propulsion vehicles for this initiative are battery electric vehicles (BEV), hybrid electric vehicles (HEV), hybrid...hydraulic vehicles (HHV), plug-in hybrid electric vehicles (PHEV) and fuel cell electric vehicles (FCEV). The AVPI integrates use of renewable energy at

  19. Precision wildlife monitoring using unmanned aerial vehicles

    OpenAIRE

    Jarrod C. Hodgson; Baylis, Shane M.; Rowan Mott; Ashley Herrod; Clarke, Rohan H.

    2016-01-01

    Unmanned aerial vehicles (UAVs) represent a new frontier in environmental research. Their use has the potential to revolutionise the field if they prove capable of improving data quality or the ease with which data are collected beyond traditional methods. We apply UAV technology to wildlife monitoring in tropical and polar environments and demonstrate that UAV-derived counts of colony nesting birds are an order of magnitude more precise than traditional ground counts. The increased count pre...

  20. Flight and Integrated Vehicle Testing: Laying the Groundwork for the Next Generation of Space Exploration Launch Vehicles

    Science.gov (United States)

    Taylor, J. L.; Cockrell, C. E.

    2009-01-01

    Integrated vehicle testing will be critical to ensuring proper vehicle integration of the Ares I crew launch vehicle and Ares V cargo launch vehicle. The Ares Projects, based at Marshall Space Flight Center in Alabama, created the Flight and Integrated Test Office (FITO) as a separate team to ensure that testing is an integral part of the vehicle development process. As its name indicates, FITO is responsible for managing flight testing for the Ares vehicles. FITO personnel are well on the way toward assembling and flying the first flight test vehicle of Ares I, the Ares I-X. This suborbital development flight will evaluate the performance of Ares I from liftoff to first stage separation, testing flight control algorithms, vehicle roll control, separation and recovery systems, and ground operations. Ares I-X is now scheduled to fly in summer 2009. The follow-on flight, Ares I-Y, will test a full five-segment first stage booster and will include cryogenic propellants in the upper stage, an upper stage engine simulator, and an active launch abort system. The following flight, Orion 1, will be the first flight of an active upper stage and upper stage engine, as well as the first uncrewed flight of an Orion spacecraft into orbit. The Ares Projects are using an incremental buildup of flight capabilities prior to the first operational crewed flight of Ares I and the Orion crew exploration vehicle in 2015. In addition to flight testing, the FITO team will be responsible for conducting hardware, software, and ground vibration tests of the integrated launch vehicle. These efforts will include verifying hardware, software, and ground handling interfaces. Through flight and integrated testing, the Ares Projects will identify and mitigate risks early as the United States prepares to take its next giant leaps to the Moon and beyond.

  1. 40 CFR 80.521 - What are the standards and identification requirements for diesel fuel additives?

    Science.gov (United States)

    2010-07-01

    ... Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor... consumer in diesel motor vehicles or nonroad diesel engines. ... identification requirements for diesel fuel additives? 80.521 Section 80.521 Protection of...

  2. Simulation of energy consumption for quadruped walking vehicle

    Science.gov (United States)

    Lei, Jingtao; Gao, Feng; Xu, Guoyan

    2006-11-01

    Simulation of energy consumption for walking vehicle is one of the basic way to preliminarily estimate the energy that will be consumed before constructing the real vehicle, providing basis for the design of vehicle to minish energy consumption. One of the most influential factors of the accuracy dynamic simulation is the appropriate contact model between leg and ground. In this paper, we adopt virtual prototyping technique to develop the dynamic modeling of a quadruped walking vehicle considering contact force between legs and ground during walking, finish simulation of dynamics and obtain dynamics characteristics, investigate the effects of different contact condition and the energy consumption. The purpose is to analyze the relationship between energy consumption and relevant influence factors, and the energy efficiency during walking is discussed with different walking velocity, strokes, duty factors and different contact material. Moreover contact force is obtained from simulations. Commercial ADAMS package is used.

  3. Steering Performance, Tactical Vehicles

    Science.gov (United States)

    2015-07-29

    NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Automotive Instrumentation Division (TEDT-AT-AD-I) U.S. Army Aberdeen Test Center 400...characterize the on-center vehicle responses of military vehicles for the purposes of influencing vehicle design and ensuring military truck steering... mechanism attached to the test vehicle’s steering wheel (or replaces the steering wheel) that is strain gaged and calibrated to measure the steering effort

  4. Electric Vehicle Propulsion System

    OpenAIRE

    2014-01-01

    Electric vehicles are being considered as one of the pillar of eco-friendly solutions to overcome the problem of global pollution and radiations due to greenhouse gases. Present thesis work reports the improvement in overall performance of the propulsion system of an electric vehicle by improving autonomy and torque-speed characteristic. Electric vehicle propulsion system consists of supply and traction system, and are coordinated by the monitoring & control system. Case of light electric veh...

  5. STARR: shortwave-targeted agile Raman robot for the detection and identification of emplaced explosives

    Science.gov (United States)

    Gomer, Nathaniel R.; Gardner, Charles W.

    2014-05-01

    In order to combat the threat of emplaced explosives (land mines, etc.), ChemImage Sensor Systems (CISS) has developed a multi-sensor, robot mounted sensor capable of identification and confirmation of potential threats. The system, known as STARR (Shortwave-infrared Targeted Agile Raman Robot), utilizes shortwave infrared spectroscopy for the identification of potential threats, combined with a visible short-range standoff Raman hyperspectral imaging (HSI) system for material confirmation. The entire system is mounted onto a Talon UGV (Unmanned Ground Vehicle), giving the sensor an increased area search rate and reducing the risk of injury to the operator. The Raman HSI system utilizes a fiber array spectral translator (FAST) for the acquisition of high quality Raman chemical images, allowing for increased sensitivity and improved specificity. An overview of the design and operation of the system will be presented, along with initial detection results of the fusion sensor.

  6. Electric vehicle propulsion alternatives

    Science.gov (United States)

    Secunde, R. R.; Schuh, R. M.; Beach, R. F.

    1983-01-01

    Propulsion technology development for electric vehicles is summarized. Analytical studies, technology evaluation, and the development of technology for motors, controllers, transmissions, and complete propulsion systems are included.

  7. Simulated water budgets and ground-water/surface-water interactions in Bushkill and parts of Monocacy Creek watersheds, Northampton County, Pennsylvania--a preliminary study with identification of data needs

    Science.gov (United States)

    Risser, Dennis W.

    2006-01-01

    This report, prepared in cooperation with the Department of Environmental Protection, Office of Mineral Resources Management, provides a preliminary analysis of water budgets and generalized ground-water/surface-water interactions for Bushkill and parts of Monocacy Creek watersheds in Northampton County, Pa., by use of a ground-water flow model. Bushkill Creek watershed was selected for study because it has areas of rapid growth, ground-water withdrawals from a quarry, and proposed stream-channel modifications, all of which have the potential for altering ground-water budgets and the interaction between ground water and streams. Preliminary 2-dimensional, steady-state simulations of ground-water flow by the use of MODFLOW are presented to show the status of work through September 2005 and help guide ongoing data collection in Bushkill Creek watershed. Simulations were conducted for (1) predevelopment conditions, (2) a water table lowered for quarry operations, and (3) anthropogenic changes in hydraulic conductivity of the streambed and aquifer. Preliminary results indicated under predevelopment conditions, the divide between the Bushkill and Monocacy Creek ground-water basins may not have been coincident with the topographic divide and as much as 14 percent of the ground-water discharge to Bushkill Creek may have originated from recharge in the Monocacy Creek watershed. For simulated predevelopment conditions, Schoeneck Creek and parts of Monocacy Creek were dry, but Bushkill Creek was gaining throughout all reaches. Simulated lowering of the deepest quarry sump to an altitude of 147 feet for quarry operations caused ground-water recharge and streamflow leakage to be diverted to the quarry throughout about 14 square miles and caused reaches of Bushkill and Little Bushkill Creeks to change from gaining to losing streams. Lowering the deepest quarry sump to an altitude of 100 feet caused simulated ground-water discharge to the quarry to increase about 4 cubic feet

  8. Reusable Space Vehicle Ground Operations Baseline Conceptual Model

    Science.gov (United States)

    2004-03-01

    detailed manufacturing process knowledge (e.g., Hubble telescope mirror fabrication process) among geographically dispersed units. - Determine the impact...take place in several different facilities located relatively close to each other with the exception of hazardous functions being geographically ...segments are ready, they are transported to the VAB for stacking as previously described. Store Segments 5.1.1.3 Inspect Segements 5.1.1.2 Transport

  9. Soldier Cognitive Processes: Supporting Teleoperated Ground Vehicle Operations

    Science.gov (United States)

    2014-12-01

    and to integrate new information with existing knowledge (Gyselinck, Ehrlich , Cornoldi, de Beni, & Dubois, 2000; Mayer & Moreno, 2003). Within...212, 212a, http://journalofvision.org/1/3/212/, doi:10.1167/1.3.212. Gyselinck, V., Ehrlich , M. F., Cornoldi, C., deBeni, R., & Dubois, V. (2000

  10. Kinematic Discrepancy of Hydrostatic Drive of Unmanned Ground Vehicle

    Directory of Open Access Journals (Sweden)

    Konopka Stanisław

    2015-12-01

    Full Text Available W opracowaniu przedstawiony został problem niezgodności kinematycznej hydrostatycznych układów napędowych pojazdów wysokiej mobilności oraz jej wpływ na występowanie niekorzystnego zjawiska mocy krążącej. Ponadto zaprezentowane zostały rozważania teoretyczne dotyczące zdolności kompensacji niezgodności kinematycznej przez hydrostatyczny układ napędowy na podstawie badań z wykorzystaniem charakterystyk statycznych.

  11. Tactical Unmanned Ground Vehicle Related Research References (BTA Study)

    Science.gov (United States)

    1993-03-01

    80. Merritt, John 0., " Autostereoscopic 3D Display System by Dimension Technologies, Incorporat (DTI)," Unpublished Memorandum, 7 December 1988. 8I...PAPER SUMMARY REFERENCE: Title: Common Problems in the Evaluation of 3D Displays, 1983 Author(s): John 0. Merritt OBJECTIVE: The potential benefits of...pegboard and square background tests will compare stereopsis to the monoscopic depth cues. The goal of the tests conducted is to determine if the 3D

  12. Infrared Stereo Calibration for Unmanned Ground Vehicle Navigation

    Science.gov (United States)

    2014-05-01

    for avoidance and path planning. The use of laser-based sensors, such as Lidar , has become quite common for assisting in such a task, however, Lidar ...systems may be too expensive for certain application and are active, not passive, sensors, so they may not be desirable in some missions. Lidars are...black and white squares using packages such as the Camera Calibration Toolbox for Matlab R©,3 OpenCV,4 and the Robot Operating System (ROS).5 However

  13. Unmanned Ground Vehicle Two-Level Planning Technology Assessment

    Science.gov (United States)

    2010-09-01

    XUV bounced down path, saw blockage, backed up in a zig zag fashion, backed into brush, backed in a circle, E-Stop, E.O.M. Scenario 2 not what...RESEARCH LAB IMNE ALC HRR 2800 POWDER MILL RD ADELPHI MD 20783-1197 1 DIRECTOR US ARMY RESEARCH LAB RDRL CIM L 2800 POWDER MILL ...RD ADELPHI MD 20783-1197 1 DIRECTOR US ARMY RESEARCH LAB RDRL CIM P 2800 POWDER MILL RD ADELPHI MD 20783-1197 1 DIRECTOR US

  14. Collaborative Autonomous Unmanned Aerial - Ground Vehicle Systems for Field Operations

    Science.gov (United States)

    2007-08-31

    decentralized PID controllers , decentralized PID-like Fuzzy Logic controllers, and a centralized LQR controller. A comparison was made between the three...others who may not be experts in the design of MPC. The MPC controller was compared to the previously designed PID controllers for both an ascending

  15. Investigation of Terrain Analysis and Classification Methods for Ground Vehicles

    Science.gov (United States)

    2012-08-27

    dry bentonite clay , modeling clay , orange sand, dry topsoil, and wet topsoil. The dry bentonite clay was a tan colored fine-grained material with the...tested: bentonite at 21.4 N; clay at 53.2 N, 68.4 N, and 83.5 N; orange sand at 53.2 N, dry topsoil at 53.2 N, 60.8 N, 68.4 N, 76.0 N, and 83.5 N; and...appearance of fine-grained sand. The modeling clay was a medium gray, damp, highly cohesive material that was flexible enough to be formed by hand

  16. Traversability Analysis for Unmanned Ground Vehicles: Interpreting the Environment

    Science.gov (United States)

    2006-12-01

    Koren, Y. (1991), The Vector Field Histogram - Fast Obstacle Avoidance for Mobile Robots, IEEE Transactions on Robotics and Automation, 7(3), 535–539...Utz, H., Sablatnog, S., Enderle, S., and Kraetzschmar, G. (2002), Miro - MIddleware for Mobile Robot Applications, IEEE Transactions on Robotics and

  17. Quadrotor for Increased Situational Awareness for Ground Vehicles

    Science.gov (United States)

    2015-01-26

    exhibit different effects we placed the mannequins in the following situations: on a 2 nd story balcony; on a 3 rd story roof partially obscured by...resolution sensor technology comes to market, an adjustable lens may be required. One key takeaway regarding altitude is that there is no perfect

  18. Daytime Mud Detection for Unmanned Ground Vehicle Autonomous Navigation

    Science.gov (United States)

    2008-12-01

    dry soil during nominal weather, i.e., no precipitation , calm wind, and near average temperatures. 2. MUD CUES FROM COLOR It is commonly...disambiguate shadows from wet soil than shadows from dry soil. (a) Red band (b) NIR band (c) NDVI image (d) Brightness image wet soil Red...spectral bands to segment wet soil. Red and NIR bands (Figures 5a and 5b) can be used to generate a Normalized Difference Vegetation Index ( NDVI

  19. Study and Analysis of Heating Concepts for Military Ground Vehicles

    Science.gov (United States)

    1986-06-30

    of a Catalytic Heater with Hydrogen Fuel," International Journal of Hydrogen Energy , Vol. 7, No. 9, p. 737-740 (1982) 26 Locklin and Hazard, p. 95-106...Combustion of Hydrogen. III. Advantages and Disadvwntages of a Catalytic Heater With Hydrogen Fuel," International Journal of Hydrogen Energy , Vol. 7, No. 9, p

  20. Mobility Performance Algorithms for Small Unmanned Ground Vehicles

    Science.gov (United States)

    2009-05-01

    following: min , BFMX MAX T SFTYPC B DCL W æ ö÷ç= ´ ÷ç ÷çè ø100 (5) where: BMX = total braking force used DCLMAX = maximum braking...V = maximum speed limited by visibility BMX = braking force (Equation 5). The reaction time between recognition and application of the brakes

  1. Vector Pursuit Path Tracking for Autonomous Ground Vehicles

    Science.gov (United States)

    2000-08-01

    collision avoidance for a mobile robot,” Robotica , v12, 1994, p521-527. [30] Saffiotti, A., Ruspini, E. H. and Konolige, K., “Blending Reactivity and...based collision avoidance for a mobile robot,” Robotica , v15, 1997, p627-632. [43] Hoffman, F. and Pfister, G., “Evolutionary Design of a Fuzzy...DeSantis, R. M., “Modeling and path-tracking control of a mobile wheeled robot with a differential drive,” Robotica , v13, 1995, p401-410. [49

  2. Nearly time-optimal paths for a ground vehicle

    Institute of Scientific and Technical Information of China (English)

    David A. ANISI; Johan HAMBERG; Xiaoming HU

    2003-01-01

    It is well known that the sufficient family of time-optimal paths for both Dubins' as well as Reeds-Shepp' s car models consist of the concatenation of circular arcs with maxmum curvature and straight line segments, all tangentially connected.These time-optimal solutions suffer from some drawbacks. Their discontinuous curvature profde, together with the wear and impairment on the control equipment that the bang-bang solutions induce, calls for "smoother" and more supple reference paths to follow. Avoiding the bang-bang solutions also raises the robustness with respect to any possible uncertainties. In this paper, our main tool for generating these "nearly time-optimal", but nevertheless continuous-curvature paths, is to use the Pontryagin Maximum Principle (PMP) and make an appropriate and cunning choice of the Lagrangian function. Despite some rewarding simuhtion results, this concept tums out to be numerically divergent at some instances. Upon a more careful investigation, it can be concluded that the problem at hand is nearly singular. This is seen by applying the PMP to Dubins' car and studying the corresponding two point boundary value problem, which turn out to be singuhr. Realizing this, one is able to contradict the widespread belief that all the information about the motion of a mobile platform lies in the initial values of the auxiliary variables associated with the PMP.

  3. Mechatronics Design of an Unmanned Ground Vehicle for Military Applications

    OpenAIRE

    Appelqvist, Pekka; Knuuttila, Jere; Ahtiainen, Juhana

    2010-01-01

    Our research was funded by the Finnish Defence Forces' technology program and additionally by the Scientific Advisory Board for Defence. The authors also want to thank other project partners, especially Patria Group and VTT (Dr. Hannu Lehtinen, Dr. Ilkka Kauppi, Petri Kaarmila and Jarmo Prokkola).

  4. U.S. Army’s Ground Vehicle Energy Storage

    Science.gov (United States)

    2013-04-16

    platforms. • TARDEC Energy Storage Team Role is the Engineering Support Activity (ESA) to ensure conformance with the specification & recommendation...for QPL acceptance. • TARDEC Standardization Team Role is the Qualifying Activity that maintains the modifications to the MIL-PRF 32143B and QPL

  5. 基于传声器阵列技术的定置汽车噪声源识别%Noise Source Identification of Customized Vehicles based on Microphone Array Technology

    Institute of Scientific and Technical Information of China (English)

    许春民; 田金鑫; 王二保

    2012-01-01

    随着人们对汽车噪声的日益关注和汽车噪声限制标准的日渐严格,控制汽车噪声已经成为汽车工业发展中一项重要而又紧迫的任务。文章基于均匀圆形传声器阵列技术,采用MUSIC空间谱估计算法,对某型轿车定置状态时不同转速下分别进行噪声源识别,找出其主要噪声源和声场分布特性,为进一步控制汽车噪声提供依据。试验结果表明:传声器阵列技术能够快速有效地进行汽车噪声源识别和定位。%With people's increasing concern on vehicle noise and strict control of vehicle noise limits standard, decreasing vehicle noise has become an important and urgent task in automotive industry development. Based on uniform circular microphone array technology and using MUSIC spatial spectrum estimation algorithm, noise source is identified according to different speed with customized state so as to find main noise source and distribution characteristics of acoustic field. It provides reference for further control of vehicle noise. The test results showed that the microphone array technology can identify and position the noise source quickly and efficiently.

  6. Hydrodynamic Coefficients Identification for the Horizontal Plane Motion of the Underwater Vehicle Using NSGA-II Algorithm%基于NSGA-II算法的水下机器人水平面运动参数辨识

    Institute of Scientific and Technical Information of China (English)

    李庆梅; 刘平; 潘芳煜; 梁彩平; 周平

    2016-01-01

    水下机器人水动力系数的获得是分析其运动及设计控制器的基础。由于水下机器人水平面具有运动强耦合、非线性的特点,采用简单遗传算法来辨识水动力系数时无法使得多个目标函数同时达到最优,所以采用带精英策略非支配排序遗传算法(NSGA-II)来对水平面运动模型进行辨识。利用辨识得到的系数反求水下机器人水平面速度,仿真速度与实测速度曲线吻合较好,表明NSGA-II辨识得到的水动力系数是有效的。%Hydrodynamic coefficients are the basis of motion analysis and controller design for the underwater vehicle. The horizontal motion of the underwater vehicle is highly coupled and nonlinear, so it is difficult to achieve the optimal results for all the objective functions at the same time when using simple genetic algorithm to identify its coefficients. As an alternative, the elitist non-dominated sorting genetic algorithm (NSGA-II) is chosen to identify the hydrodynamic coefficients of the motion in the horizontal plane. The coefficients identified by NSGA-II are then used to calculate the velocities of the underwater vehicle and they are approach to the velocities measured by sensors on the underwater vehicle. It is proved that the method used is effective.

  7. 75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2010-12-09

    ..., and 571 Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY... passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

  8. Factors influencing aircraft ground handling performance

    Science.gov (United States)

    Yager, T. J.

    1983-01-01

    Problems associated with aircraft ground handling operations on wet runways are discussed and major factors which influence tire/runway braking and cornering traction capability are identified including runway characteristics, tire hydroplaning, brake system anomalies, and pilot inputs. Research results from tests with instrumented ground vehicles and aircraft, and aircraft wet runway accident investigation are summarized to indicate the effects of different aircraft, tire, and runway parameters. Several promising means are described for improving tire/runway water drainage capability, brake system efficiency, and pilot training to help optimize aircraft traction performance on wet runways.

  9. R-Gator: an unmanned utility vehicle

    Science.gov (United States)

    Moorehead, Stewart J.; Wellington, Carl K.; Paulino, Heidi; Reid, John F.

    2010-04-01

    The R-Gator is an unmanned ground vehicle built on the John Deere 6x4 M-Gator utility vehicle chassis. The vehicle is capable of operating in urban and off-road terrain and has a large payload to carry supplies, wounded, or a marsupial robot. The R-Gator has 6 modes of operation: manual driving, teleoperation, waypoint, direction drive, playback and silent sentry. In direction drive the user specifies a direction for the robot. It will continue in that direction, avoiding obstacles, until given a new direction. Playback allows previously recorded paths, from any other mode including manual, to be played back and repeated. Silent sentry allows the engine to be turned off remotely while cameras, computers and comms remain powered by batteries. In this mode the vehicle stays quiet and stationary, collecting valuable surveillance information. The user interface consists of a wearable computer, monocle and standard video game controller. All functions of the R-Gator can be controlled by the handheld game controller, using at most 2 button presses. This easy to use user interface allows even untrained users to control the vehicle. This paper details the systems developed for the R-Gator, focusing on the novel user interface and the obstacle detection system, which supports safeguarded teleoperation as well as full autonomous operation in off-road terrain. The design for a new 4-wheel, independent suspension chassis version of the R-Gator is also presented.

  10. Design criteria for light high speed desert air cushion vehicles

    Science.gov (United States)

    Abulnaga, B. E.

    An evaluation is made of the applicability and prospective performance of ACVs in trans-Saharan cargo transport, in view of the unique characteristics of the dry sand environment. The lightweight/high-speed ACV concept envisioned is essentially ground effect aircraftlike, with conventional wheels as a low-speed backup suspension system. A propeller is used in ground effect cruise. Attention is given to the effects on vehicle stability and performance of sandy surface irregularities of the desert topography and of cross-winds from various directions relative to vehicle movement.

  11. Experimental Evaluation of the Scale Model Method to Simulate Lunar Vehicle Dynamics

    Science.gov (United States)

    Johnson, Kyle; Asnani, Vivake; Polack, Jeff; Plant, Mark

    2016-01-01

    As compared to driving on Earth, the presence of lower gravity and uneven terrain on planetary bodies makes high speed driving difficult. In order to maintain ground contact and control vehicles need to be designed with special attention to dynamic response. The challenge of maintaining control on the Moon was evident during high speed operations of the Lunar Roving Vehicle (LRV) on Apollo 16, as at one point all four tires were off the ground; this event has been referred to as the Lunar Grand Prix. Ultimately, computer simulation should be used to examine these phenomena during the vehicle design process; however, experimental techniques are required for the validation and elucidation of key issues. The objectives of this study were to evaluate the methodology for developing a scale model of a lunar vehicle using similitude relationships and to test how vehicle configuration, six or eight wheel pods, and local tire compliance, soft or stiff, affect the vehicles dynamic performance. A wheel pod consists of a drive and steering transmission and wheel. The Lunar Electric Rover (LER), a human driven vehicle with a pressurized cabin, was selected as an example for which a scale model was built. The scaled vehicle was driven over an obstacle and the dynamic response was observed and then scaled to represent the full-size vehicle in lunar gravity. Loss of ground contact, in terms of vehicle travel distance with tires off the ground, was examined. As expected, local tire compliance allowed ground contact to be maintained over a greater distance. However, switching from a six-tire configuration to an eight-tire configuration with reduced suspension stiffness had a negative effect on ground contact. It is hypothesized that this was due to the increased number or frequency of impacts. The development and testing of this scale model provided practical lessons for future low-gravity vehicle development.

  12. Yield estimation of winter wheat in early growth periods by vehicle-borne ground-based remote sensing system%基于车载近地遥感系统的冬小麦生育早期产量估测方法

    Institute of Scientific and Technical Information of China (English)

    李树强; 李民赞

    2014-01-01

    冬小麦生育早期的产量估测对于制定冬小麦整个生长期的精准管理策略具有重要的参考意义。该文利用车载近地遥感估产系统对冬小麦生育早期冠层叶片光谱信息进行动态获取,提出了一种基于冠层光谱信息的动态光化学植被指数MPRI(mobile photochemical reflectance index),构建了基于MPRI的冬小麦产量车载近地遥感估产模型,分析了估测效果,结合GIS手段对估产数据进行了空间分析。研究结果表明:冬小麦生育早期冠层指数MPRI对冬小麦的产量单点估测具有一定的效果,决定系数R2约为0.78。车载近地遥感估产系统动态测量时,MPRI表现出良好的数据识别能力。通过设置阈值能够剔除动态测量中的土壤背景干扰信息,说明MPRI对于冬小麦生育早期产量具有较好的估测效果。对动态估产结果进行空间分析,能够掌握小区域内小麦生育早期产量的空间分布情况,为冬小麦生育早期产量估测提供了新的思路和方法。%The index of crop growth monitoring has a close relationship with crop yield. It could forecast a large-scale food state that indicates a possibility of either a missing or surplus yield as early as possible, and it is therefore important for the macro control of food. Using near-ground remote sensing is significant to understanding the growth of crops and providing accurate and scientific data for precision agriculture. For the small area growers, the vehicle-borne system shows the good prospects and has gradually become the first choice method. This paper discusses a method that is one of the most important tools for yield prediction for winter wheat in the jointing stage. It is an efficient, flexible, and economical operation for a small region. Usually the vehicle-borne growth monitoring system cannot maintain steady operations due to the row spacing of winter wheat in the jointing stage. The background

  13. Vehicle usage verification system

    NARCIS (Netherlands)

    Scanlon, William G.; McQuiston, Jonathan; Cotton, Simon L.

    2012-01-01

    EN)A computer-implemented system for verifying vehicle usage comprising a server capable of communication with a plurality of clients across a communications network. Each client is provided in a respective vehicle and with a respective global positioning system (GPS) by which the client can determi

  14. Electric Vehicle Battery Challenge

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    A serious drawback to electric vehicles [batteries only] is the idle time needed to recharge their batteries. In this challenge, students can develop ideas and concepts for battery change-out at automotive service stations. Such a capability would extend the range of electric vehicles.

  15. The Electric Vehicle Development

    DEFF Research Database (Denmark)

    Wang, Jingyu; Liu, Yingqi; Kokko, Ari

    2014-01-01

    In order to respond to the energy crisis and environment problem, countries carry out their research and promotion about electric vehicles. As the ten cities one thousand new energy buses started in 2009, the new energy vehicles have been greatly developed in China, while the development of elect...

  16. Vehicle Routing Problem Models

    Directory of Open Access Journals (Sweden)

    Tonči Carić

    2004-01-01

    Full Text Available The Vehicle Routing Problem cannot always be solved exactly,so that in actual application this problem is solved heuristically.The work describes the concept of several concrete VRPmodels with simplified initial conditions (all vehicles are ofequal capacity and start from a single warehouse, suitable tosolve problems in cases with up to 50 users.

  17. Motor Vehicle Safety

    Science.gov (United States)

    ... to prevent these crashes is one part of motor vehicle safety. Here are some things you can do to be safer on the road: Make sure your vehicle is safe and in working order Use car seats for children Wear your seat belt Don' ...

  18. Electric Vehicle Battery Challenge

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    A serious drawback to electric vehicles [batteries only] is the idle time needed to recharge their batteries. In this challenge, students can develop ideas and concepts for battery change-out at automotive service stations. Such a capability would extend the range of electric vehicles.

  19. Whither electric vehicles?

    OpenAIRE

    Shukla, AK

    2002-01-01

    In the late 1890s, at the dawn of the automobile era, steam, gasoline and electric vehicles all competed to become the dominant automobile technology. By the early 1900s, the battle was over and Internal Combustion Engine Vehicles (ICEVs) were poised to become the prime movers of the twentieth century.

  20. Operator Informational Needs for Multiple Autonomous Small Vehicles

    Science.gov (United States)

    Trujillo, Anna C.; Fan, Henry; Cross, Charles D.; Hempley, Lucas E.; Cichella, Venanzio; Puig-Navarro, Javier; Mehdi, Syed Bilal

    2015-01-01

    With the anticipated explosion of small unmanned aerial vehicles, it is highly likely that operators will be controlling fleets of autonomous vehicles. To fulfill the promise of autonomy, vehicle operators will not be concerned with manual control of the vehicle; instead, they will deal with the overall mission. Furthermore, the one operator to many vehicles is becoming a constant meme with various industries including package delivery, search and rescue, and utility companies. In order for an operator to concurrently control several vehicles, his station must look and behave very differently than the current ground control station instantiations. Furthermore, the vehicle will have to be much more autonomous, especially during non-normal operations, in order to accommodate the knowledge deficit or the information overload of the operator in charge of several vehicles. The expected usage increase of small drones requires presenting the operational information generated by a fleet of heterogeneous autonomous agents to an operator. NASA Langley Research Center's Autonomy Incubator has brought together researchers in various disciplines including controls, trajectory planning, systems engineering, and human factors to develop an integrated system to study autonomy issues. The initial human factors effort is focusing on mission displays that would give an operator the overall status of all autonomous agents involved in the current mission. This paper will discuss the specifics of the mission displays for operators controlling several vehicles.

  1. Integrated analysis of hydrogen passenger vehicle transportation pathways

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, C.E.; James, B.D.; Lomax, F.D. Jr.; Kuhn, I.F. Jr. [Directed Technologies, Inc., Arlington, VA (United States)

    1998-08-01

    Hydrogen-powered fuel cell vehicles will reduce local air pollution, greenhouse gas emissions and oil imports. Other alternative vehicles such as gasoline- or methanol-powered fuel cell vehicles, natural gas vehicles and various hybrid electric vehicles with internal combustion engines may also provide significant environmental and national security advantages. This report summarizes a two-year project to compare the direct hydrogen fuel cell vehicle with other alternatives in terms of estimated cost and estimated societal benefits, all relative to a conventional gasoline-powered internal combustion engine vehicle. The cost estimates used in this study involve ground-up, detailed analysis of the major components of a fuel cell vehicle system, assuming mass production in automotive quantities. The authors have also estimated the cost of both gasoline and methanol onboard fuel processors, as well as the cost of stationary hydrogen fueling system components including steam methane reformers, electrolyzers, compressors and stationary storage systems. Sixteen different vehicle types are compared with respect to mass production cost, local air pollution and greenhouse gas emissions.

  2. Northwest passage: Trade route for large air cushion vehicles

    Science.gov (United States)

    Anderson, J. L.

    1973-01-01

    A conceptual vehicle and powerplant (10,000-ton) nuclear-powered air-cushion vehicle (ACV) that could open the Northwest Passage and other Arctic passages to commercial traffic is identified. The report contains a description of the conceptual vehicle, including the powerplant and operations, an assessment of technical feasibility, estimates of capital and operating costs, and identification of eligible cargo and markets. A comparison of the nuclear ACV freighter with nuclear container ships shows that for containerized or roll-on/roll-off cargo the ACV would provide greatly reduced transit time between North Atlantic and North Pacific ports at a competitive cost.

  3. Automated Vehicles Symposium 2015

    CERN Document Server

    Beiker, Sven

    2016-01-01

    This edited book comprises papers about the impacts, benefits and challenges of connected and automated cars. It is the third volume of the LNMOB series dealing with Road Vehicle Automation. The book comprises contributions from researchers, industry practitioners and policy makers, covering perspectives from the U.S., Europe and Japan. It is based on the Automated Vehicles Symposium 2015 which was jointly organized by the Association of Unmanned Vehicle Systems International (AUVSI) and the Transportation Research Board (TRB) in Ann Arbor, Michigan, in July 2015. The topical spectrum includes, but is not limited to, public sector activities, human factors, ethical and business aspects, energy and technological perspectives, vehicle systems and transportation infrastructure. This book is an indispensable source of information for academic researchers, industrial engineers and policy makers interested in the topic of road vehicle automation.

  4. Automated Vehicles Symposium 2014

    CERN Document Server

    Beiker, Sven; Road Vehicle Automation 2

    2015-01-01

    This paper collection is the second volume of the LNMOB series on Road Vehicle Automation. The book contains a comprehensive review of current technical, socio-economic, and legal perspectives written by experts coming from public authorities, companies and universities in the U.S., Europe and Japan. It originates from the Automated Vehicle Symposium 2014, which was jointly organized by the Association for Unmanned Vehicle Systems International (AUVSI) and the Transportation Research Board (TRB) in Burlingame, CA, in July 2014. The contributions discuss the challenges arising from the integration of highly automated and self-driving vehicles into the transportation system, with a focus on human factors and different deployment scenarios. This book is an indispensable source of information for academic researchers, industrial engineers, and policy makers interested in the topic of road vehicle automation.

  5. Ground water and energy

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    This national workshop on ground water and energy was conceived by the US Department of Energy's Office of Environmental Assessments. Generally, OEA needed to know what data are available on ground water, what information is still needed, and how DOE can best utilize what has already been learned. The workshop focussed on three areas: (1) ground water supply; (2) conflicts and barriers to ground water use; and (3) alternatives or solutions to the various issues relating to ground water. (ACR)

  6. Hydrogen vehicle fueling station

    Energy Technology Data Exchange (ETDEWEB)

    Daney, D.E.; Edeskuty, F.J.; Daugherty, M.A. [Los Alamos National Lab., NM (United States)] [and others

    1995-09-01

    Hydrogen fueling stations are an essential element in the practical application of hydrogen as a vehicle fuel, and a number of issues such as safety, efficiency, design, and operating procedures can only be accurately addressed by a practical demonstration. Regardless of whether the vehicle is powered by an internal combustion engine or fuel cell, or whether the vehicle has a liquid or gaseous fuel tank, the fueling station is a critical technology which is the link between the local storage facility and the vehicle. Because most merchant hydrogen delivered in the US today (and in the near future) is in liquid form due to the overall economics of production and delivery, we believe a practical refueling station should be designed to receive liquid. Systems studies confirm this assumption for stations fueling up to about 300 vehicles. Our fueling station, aimed at refueling fleet vehicles, will receive hydrogen as a liquid and dispense it as either liquid, high pressure gas, or low pressure gas. Thus, it can refuel any of the three types of tanks proposed for hydrogen-powered vehicles -- liquid, gaseous, or hydride. The paper discusses the fueling station design. Results of a numerical model of liquid hydrogen vehicle tank filling, with emphasis on no vent filling, are presented to illustrate the usefulness of the model as a design tool. Results of our vehicle performance model illustrate our thesis that it is too early to judge what the preferred method of on-board vehicle fuel storage will be in practice -- thus our decision to accommodate all three methods.

  7. Characterization of articulated vehicles using ladar seekers

    Science.gov (United States)

    Wellfare, Michael R.; Norris-Zachery, Karen

    1997-08-01

    Many vehicle targets of interest to military automatic target recognition (ATR) possess articulating components: that is, they have components that change position relative to the main body. Many vehicles also have multiple configurations wherein one or more devices or objects may be added to enhance specific military or logistical capabilities. As the expected target set for military ATR becomes more comprehensive, many additional articulations and optional components must be handled. Mobile air defense units often include moving radar antennae as well as turreted guns and missile launchers. Surface-to-surface missile launchers may be encountered with or without missiles, and with the launch rails raised or lowered. Engineers and countermine vehicles have a tremendous number of possible configurations and even conventional battle tanks may very items such as external reactive armor, long- range tanks, turret azimuth, and gun elevation. These changes pose a significant barrier to the target identification process since they greatly increase the range of possible target signatures. When combined with variations already encountered due to target aspect changes, an extremely large number of possible signatures is formed. Conventional algorithms cannot process so many possibilities effectively, so in response, the matching process is often made less selective. This degrades identification performance, increase false alarm rates, and increases data requirements for algorithm testing and training. By explicitly involving articulation in the detection and identification stages of an ATR algorithm, more precise matching constraints can be applied, and better selectivity can be achieve. Additional benefits include the measurement of the position and orientation of articulated components, which often has tactical significance. In this paper, the result of a study investigating the impact of target articulation in ATR for military vehicles are presented. 3D ladar signature

  8. Developing a Blended Type Course of Introduction to Hybrid Vehicles

    Directory of Open Access Journals (Sweden)

    Na Zhu

    2016-02-01

    Full Text Available An innovative course of introduction to hybrid vehicles is developed for both associate and bachelor degree programs for engineering technology with automotive/mechanical concentration. The hybrid vehicle course content includes several topics, such as the rational of pure electric vehicle and hybrid vehicle, hybrid vehicle propulsion systems, fundamentals of motor/generator systems, fundamentals of battery and energy management system, and introduction to various configurations of hybrid vehicle systems available in market and under development. Hybrid vehicle technology is a new area and developed rapidly in the field of automotive and mechanical engineering. Students need not only the fundamentals and concepts from college, but also the ability to keep up with the latest technology after their graduation. Therefore, a blended course type is employed to help students have a better understanding of the fundamentals of hybrid vehicle and developing their self-studying ability. Topics in the course have three steps of learning. Firstly, on-ground lecture is given in class, where the instructor explains basic knowledge, such as principles, equations, and design rules.  In this way, the students will have enough background knowledge and be able to conduct further self-reading and research work. Secondly, students are required to go to university’s desire to learn (D2L online system and finish the online part of the topic. In the D2L system, students will find a quiz and its supporting materials. Thirdly, students come back to the on-ground lecture and discuss the quiz in groups with instructor. After the discussion, the instructor gives students a conclusion of the topic and moves forward to the next topic. A computer simulation class is also given to help student better understand the operation strategies of the hybrid vehicle systems and have a trial of design of hybrid vehicle.

  9. A Comparative Study Based on the Least Square Parameter Identification Method for State of Charge Estimation of a LiFePO4 Battery Pack Using Three Model-Based Algorithms for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Taimoor Zahid

    2016-09-01

    Full Text Available Battery energy storage management for electric vehicles (EV and hybrid EV is the most critical and enabling technology since the dawn of electric vehicle commercialization. A battery system is a complex electrochemical phenomenon whose performance degrades with age and the existence of varying material design. Moreover, it is very tedious and computationally very complex to monitor and control the internal state of a battery’s electrochemical systems. For Thevenin battery model we established a state-space model which had the advantage of simplicity and could be easily implemented and then applied the least square method to identify the battery model parameters. However, accurate state of charge (SoC estimation of a battery, which depends not only on the battery model but also on highly accurate and efficient algorithms, is considered one of the most vital and critical issue for the energy management and power distribution control of EV. In this paper three different estimation methods, i.e., extended Kalman filter (EKF, particle filter (PF and unscented Kalman Filter (UKF, are presented to estimate the SoC of LiFePO4 batteries for an electric vehicle. Battery’s experimental data, current and voltage, are analyzed to identify the Thevenin equivalent model parameters. Using different open circuit voltages the SoC is estimated and compared with respect to the estimation accuracy and initialization error recovery. The experimental results showed that these online SoC estimation methods in combination with different open circuit voltage-state of charge (OCV-SoC curves can effectively limit the error, thus guaranteeing the accuracy and robustness.

  10. Analysis of Driving Fatigue Detection Based on EEG Identification Combined with Vehicle Manipulation Features%基于脑电识别与车辆操纵特征的驾驶疲劳检测分析

    Institute of Scientific and Technical Information of China (English)

    付强

    2016-01-01

    本文以脑电识别与车辆操纵特征为切入点,通过模拟疲劳驾驶实验,将脑电识别与车辆操纵特性相结合来检测驾驶员的疲劳状态.通过对脑电信号的S变换分析,发现不同驾驶时刻其变换时频谱图存在显著差异,可用来区分驾驶过程中驾驶员的精神状态,结合车辆操纵特征参数,得到操纵特征与疲劳状态的关系,为脑电识别与操纵特征的驾驶疲劳检测的有效性提供一定的理论和实验基础.%In this paper,the EEG recognition and vehicle control characteristics as the breakthrough point,through the simulation of fatigue driving experiments,the EEG recognition and vehicle control characteristics combined to detect the driver's fatigue state.The S transform of the EEG signal analysis, found that different driving moment transform spectrum there are significant differences can be used to distinguish between the mental state of the driver in the driving process, combined with vehicle handling characteristic parameters,control characteristics and fatigue,for EEG recognition effectiveness of the driver fatigue detection and handling characteristics provide theoretical and experimental basis.

  11. 某款车用发电机低速噪声源的识别与控制%Identification and Reduction of the Noise Source of a Vehicle's Generator Operation in Low Speed Range

    Institute of Scientific and Technical Information of China (English)

    石晓辉; 昌诗力; 施全; 易鹏

    2015-01-01

    针对某款车用发电机低速噪声偏大的问题,首先进行发电机台架噪声试验,运用阶次分析找到主要特征阶次.采用数值模拟和试验验证相结合的方法对车用发电机结构进行模态分析,计算出发电机的前几阶固有频率与模态振型.结合噪声试验分析结果与模态特性,得出低速噪声偏大是由于发电机在电磁力波的激励下发生了共振的结论.最后提出改进建议,改进后的电机低速下噪声得到明显的改善,总体声压级降低约2 dB(A),共振处声压级降低约5 dB(A).%The problem of overlarge noise of a vehicle's generator operating in low speed range was studied. Firstly, the noise was tested in a test bench and the main orders of the noise were found by order analysis. Secondly, both numerical simulation and experimental test were applied to the modal analysis of the vehicle's generator, and the natural frequencies and vibration modes of the previous orders of the vehicle's generator were calculated. Thirdly, through the comprehensive analysis of the test results of noise and the modal characteristics, it was concluded that the overlarge noise in low speed range was caused by the generator's resonance inspired by electromagnetic force wave. Finally, some improvement suggestions were provided and the noise of the vehicle's generator operating in low speed range was reduced distinctly, the overall noise dropped by 2 dB(A), and the noise in the resonance point dropped by 5 dB(A).

  12. Selected Foreign Counterparts of U.S. Army Ground Combat Systems and Implications for Combat Operations and Modernization

    Science.gov (United States)

    2017-01-18

    not have a new ground combat vehicle under development and “at current funding levels, the Bradley and Abrams will remain in the inventory for 50...time since World War I, that the Army does not have a new ground combat vehicle under development and “at current funding levels, the Bradley and...Jane’s Land Warfare Platforms Armoured Fighting Vehicles, 2016-2017; IHS Jane’s Armour and Artillery, 2011-2012; and unclassified information provided to

  13. Identification du modele mathematique d'un helicoptere reduit

    Science.gov (United States)

    Honvo, Japhet

    The remote-controlled helicopter remains an interesting topic for research in flight control. This kind of machine, easy to deploy due to their small size, is an ideal candidate to test multiple flight control algorithms. To better understand the dynamics of flight of this vehicle, it is important to have a mathematical model. This thesis follows the logic of obtaining a mathematical model for a stationary hovering helicopter. This thesis aims to provide a testbench for the identification of a mathematical model of a small helicopter and for the application of different flight control laws. First, a review on the identification theory is introduced. The methods presented are applicable to multivariable systems. A particular focus is on the identification of state models. The theory concludes with the presentation of algorithms used in the Matlab/Simulink software. Second, a mathematical model of the helicopter is developed. As part of our research, hypotheses to reduce the model are presented. This model is the basis for determining the right identification methods. The mathematical model provides a guideline for specifying the various components of the test bench. The thesis continues with the presentation of the avionics used in the project. The instrumentation is presented in two parts: the hardware and the software. The acquisition of real-time flight parameters is also presented. Finally, the use of the test bench is detailed for the ground tests and for the flight tests. These tests are designed to collect the data necessary for the deployment of various identification techniques. The thesis concludes with comments on significants results and suggestions of prospects for improving the test bench.

  14. High-Fidelity Prediction of Launch Vehicle Lift-off Acoustic Environment Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Launch vehicles experience extreme acoustic loads during liftoff driven by the interaction of rocket plumes and plume-generated acoustic waves with ground...

  15. PREDICTION OF DISTURBANCES IN VEHICLE CONTROL SYSTEMS BASED ON THE METHODS OF COMPUTATIONAL INTELLIGENCE

    Directory of Open Access Journals (Sweden)

    L. Lyubchik

    2009-01-01

    Full Text Available The problem of disturbances forecasting in vehicles control systems is considered in the given article. On the basis of nuclear campaign recurrence there have been obtained algorithms of identification and prediction of disturbances time series.

  16. Cumulative Vehicle Routing Problems

    OpenAIRE

    Kara, &#;mdat; Kara, Bahar Yeti&#;; Yeti&#;, M. Kadri

    2008-01-01

    This paper proposes a new objective function and corresponding formulations for the vehicle routing problem. The new cost function defined as the product of the distance of the arc and the flow on that arc. We call a vehicle routing problem with this new objective function as the Cumulative Vehicle Routing Problem (CumVRP). Integer programming formulations with O(n2) binary variables and O(n2) constraints are developed for both collection and delivery cases. We show that the CumVRP is a gener...

  17. Blast resistant vehicle seat

    Energy Technology Data Exchange (ETDEWEB)

    Ripley, Edward B

    2013-02-12

    Disclosed are various seats for vehicles particularly military vehicles that are susceptible to attack by road-bed explosive devices such as land mines or improvised explosive devices. The seats often have rigid seat shells and may include rigid bracing for rigidly securing the seat to the chassis of the vehicle. Typically embodiments include channels and particulate media such as sand disposed in the channels. A gas distribution system is generally employed to pump a gas through the channels and in some embodiments the gas is provided at a pressure sufficient to fluidize the particulate media when an occupant is sitting on the seat.

  18. The Identification of Factors Affecting the Development and Practice of School-Based Counseling in Different National Contexts: A Grounded Theory Study Using a Worldwide Sample of Descriptive Journal Articles and Book Chapters

    Science.gov (United States)

    Martin, Ian; Lauterbach, Alexandra; Carey, John

    2015-01-01

    A grounded theory methodology was used to analyze articles and book chapters describing the development and practice of school-based counseling in 25 different countries in order to identify the factors that affect development and practice. An 11-factor analytic framework was developed. Factors include: Cultural Factors, National Needs, Larger…

  19. Hierarchical flight control system synthesis for rotorcraft-based unmanned aerial vehicles

    Science.gov (United States)

    Shim, Hyunchul

    The Berkeley Unmanned Aerial Vehicle (UAV) research aims to design, implement, and analyze a group of autonomous intelligent UAVs and UGVs (Unmanned Ground Vehicles). The goal of this dissertation is to provide a comprehensive procedural methodology to design, implement, and test rotorcraft-based unmanned aerial vehicles (RUAVs). We choose the rotorcraft as the base platform for our aerial agents because it offers ideal maneuverability for our target scenarios such as the pursuit-evasion game. Aided by many enabling technologies such as lightweight and powerful computers, high-accuracy navigation sensors and communication devices, it is now possible to construct RUAVs capable of precise navigation and intelligent behavior by the decentralized onboard control system. Building a fully functioning RUAV requires a deep understanding of aeronautics, control theory and computer science as well as a tremendous effort for implementation. These two aspects are often inseparable and therefore equally highlighted throughout this research. The problem of multiple vehicle coordination is approached through the notion of a hierarchical system. The idea behind the proposed architecture is to build a hierarchical multiple-layer system that gradually decomposes the abstract mission objectives into the physical quantities of control input. Each RUAV incorporated into this system performs the given tasks and reports the results through the hierarchical communication channel back to the higher-level coordinator. In our research, we provide a theoretical and practical approach to build a number of RUAVs based on commercially available navigation sensors, computer systems, and radio-controlled helicopters. For the controller design, the dynamic model of the helicopter is first built. The helicopter exhibits a very complicated multi-input multi-output, nonlinear, time-varying and coupled dynamics, which is exposed to severe exogenous disturbances. This poses considerable difficulties for

  20. Circular Path and Linear Momentum (CPLM Method for Seismic Response Analysis of Vehicles

    Directory of Open Access Journals (Sweden)

    Rishi Ram Parajuli

    2016-07-01

    Full Text Available We propose a circular path and linear momentum method for the seismic response analysis of vehicles. This method considers the momentum induced by earthquake excitation and applies the concept of centripetal force acting laterally on the vehicle in addition to longitudinal forces. This method is valid for vehicles at rest as well as those moving at a range of speeds. The vertical responses are calculated using a quarter vehicle model. We also calculate the translational motion of the vehicle using a model with six degrees of freedom. Three vehicle types (car, bus, and truck were used in the analysis. We compared the result with analysis of the response of a shaking vehicle from video footage recorded during the Gorkha earthquake. We used the input ground motion from 10 large earthquakes of moment magnitudes 6.7 to 9.0. All three components of the ground motion were used in the analysis. Vehicles at rest and moving at various speeds were analysed. The lateral and longitudinal responses of the vehicles were calculated for different vehicle speeds ranging from 0 to 30.0 m/s, PGA excitations and orientations of the vehicle.

  1. Vehicle Dynamics and Control

    CERN Document Server

    Rajamani, Rajesh

    2012-01-01

    Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicle. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability co...

  2. Hybrid vehicle control

    Energy Technology Data Exchange (ETDEWEB)

    Shallvari, Iva; Velnati, Sashidhar; DeGroot, Kenneth P.

    2015-07-28

    A method and apparatus for heating a catalytic converter's catalyst to an efficient operating temperature in a hybrid electric vehicle when the vehicle is in a charge limited mode such as e.g., the charge depleting mode or when the vehicle's high voltage battery is otherwise charge limited. The method and apparatus determine whether a high voltage battery of the vehicle is incapable of accepting a first amount of charge associated with a first procedure to warm-up the catalyst. If it is determined that the high voltage battery is incapable of accepting the first amount of charge, a second procedure with an acceptable amount of charge is performed to warm-up the catalyst.

  3. Hybrid vehicle control

    Science.gov (United States)

    Shallvari, Iva; Velnati, Sashidhar; DeGroot, Kenneth P.

    2015-07-28

    A method and apparatus for heating a catalytic converter's catalyst to an efficient operating temperature in a hybrid electric vehicle when the vehicle is in a charge limited mode such as e.g., the charge depleting mode or when the vehicle's high voltage battery is otherwise charge limited. The method and apparatus determine whether a high voltage battery of the vehicle is incapable of accepting a first amount of charge associated with a first procedure to warm-up the catalyst. If it is determined that the high voltage battery is incapable of accepting the first amount of charge, a second procedure with an acceptable amount of charge is performed to warm-up the catalyst.

  4. Aerodynamics of Small Vehicles

    Science.gov (United States)

    Mueller, Thomas J.

    In this review we describe the aerodynamic problems that must be addressed in order to design a successful small aerial vehicle. The effects of Reynolds number and aspect ratio (AR) on the design and performance of fixed-wing vehicles are described. The boundary-layer behavior on airfoils is especially important in the design of vehicles in this flight regime. The results of a number of experimental boundary-layer studies, including the influence of laminar separation bubbles, are discussed. Several examples of small unmanned aerial vehicles (UAVs) in this regime are described. Also, a brief survey of analytical models for oscillating and flapping-wing propulsion is presented. These range from the earliest examples where quasi-steady, attached flow is assumed, to those that account for the unsteady shed vortex wake as well as flow separation and aeroelastic behavior of a flapping wing. Experiments that complemented the analysis and led to the design of a successful ornithopter are also described.

  5. Hydraulic Hybrid Vehicles

    Science.gov (United States)

    EPA and the United Parcel Service (UPS) have developed a hydraulic hybrid delivery vehicle to explore and demonstrate the environmental benefits of the hydraulic hybrid for urban pick-up and delivery fleets.

  6. TRACKED VEHICLE Rev 75

    Energy Technology Data Exchange (ETDEWEB)

    2007-05-08

    Revision 75 of the Tracked Vehicle software is a soft real-time simulation of a differentially steered, tracked mobile robot, which, because of the track flippers, resembles the iRobot PackBot (http://www.irobot.com/). Open source libraries are used for the physics engine (http://www.ode.org/), the display and user interface (http://www.mathies.com/cpw/), and the program command line and configuration file parameters (http://www.boost.org/). The simulation can be controlled by a USB joystick or the keyboard. The configuration file contains demonstration model parameters of no particular vehicle. This simulation can be used as a starting point for those doing tracked vehicle simulations. This simulation software is essentially a research tool which can be modified and adapted for certain types of tracked vehicle research. An open source license allows an individual researchers to tailor the code to their specific research needs.

  7. Handbook of Intelligent Vehicles

    CERN Document Server

    2012-01-01

    The Handbook of Intelligent Vehicles provides a complete coverage of the fundamentals, new technologies, and sub-areas essential to the development of intelligent vehicles; it also includes advances made to date, challenges, and future trends. Significant strides in the field have been made to date; however, so far there has been no single book or volume which captures these advances in a comprehensive format, addressing all essential components and subspecialties of intelligent vehicles, as this book does. Since the intended users are engineering practitioners, as well as researchers and graduate students, the book chapters do not only cover fundamentals, methods, and algorithms but also include how software/hardware are implemented, and demonstrate the advances along with their present challenges. Research at both component and systems levels are required to advance the functionality of intelligent vehicles. This volume covers both of these aspects in addition to the fundamentals listed above.

  8. Abandoned vehicles REMINDER

    CERN Document Server

    Relations with the Host States Service

    2004-01-01

    The services in charge of managing the CERN site have recently noted an increase in the number of abandoned vehicles. This poses a risk from the point of view of safety and security and, on the eve of several important events in honour of CERN's fiftieth anniversary, is detrimental to the Organization's image. Owners of vehicles that have been left immobile for some time on the CERN site, including on the external car park by the flags, are therefore invited to contact the Reception and Access Control Service (service-parking-longterm@cern.ch) before 1st October 2004 and, where appropriate, move their vehicle to a designated long-term parking area. After this date, any vehicle whose owner has failed to respond to this request and which is without a number plate, has been stationary for several weeks or is out of service, may be impounded at the owner's risk and expense. Relations with the Host States Service Tel. 72848

  9. Abandoned vehicles - Reminder

    CERN Document Server

    Relations with the Host States Service

    2004-01-01

    The services in charge of managing the CERN site have recently noted an increase in the number of abandoned vehicles. This poses a risk from the point of view of safety and security and, on the eve of several important events in honour of CERN's fiftieth anniversary, is detrimental to the Organization's image. Owners of vehicles that have been left immobile for some time on the CERN site, including on the external car park by the flags, are therefore invited to contact the Reception and Access Control Service (service-parking-longterm@cern.ch) before 1st October 2004 and, where appropriate, move their vehicle to a designated long-term parking area. After this date, any vehicle whose owner has failed to respond to this request and which is without a number plate, has been stationary for several weeks or is out of service, may be impounded at the owner's risk and expense. Relations with the Host States Service Tel. 72848

  10. Abandonned vehicles - REMINDER

    CERN Document Server

    Relations with the Host States Service

    2004-01-01

    The services in charge of managing the CERN site have recently noted an increase in the number of abandoned vehicles. This poses a risk from the point of view of safety and security and, on the eve of several important events in honour of CERN's fiftieth anniversary, is detrimental to the Organization's image. Owners of vehicles that have been left immobile for some time on the CERN site, including on the external car park by the flags, are therefore invited to contact the Reception and Access Control Service (service-parking-longterm@cern.ch) before 1st October 2004 and, where appropriate, move their vehicle to a designated long-term parking area. After this date, any vehicle whose owner has failed to respond to this request and which is without a number plate, has been stationary for several weeks or is out of service, may be impounded at the owner's risk and expense. Relations with the Host States Service Tel. 72848

  11. Orbital maneuvering vehicle: A new capability

    Science.gov (United States)

    Huber, William G.

    The Orbital Maneuvering Vehicle (OMV) is a reusable, remotely controlled, free-flying vehicle being developed by NASA to perform a wide range of on-orbit missions and services in support of orbiting spacecraft. The OMV is capable of satellite delivery, retrieval, reboost, controlled deorbit, viewing, and subsatellite support missions. It is an important extension to the Space Transportation System and a key element of the Space Station operational scenario. The OMV can operate from the Shuttle, the Space Station, or can be space based. The OMV, being 15 ft in diameter and approximately 4 1/2 thick, mounts directly into the Shuttle payload bay. The vehicle design is highly modular, consisting of a Short Range Vehicle containing both hydrazine and cold gas RCS systems and all the avionics systems for electrical power, communications, data management, guidance, navigation, and 6-degree of freedom control. This vehicle weighs approximately 6,500 lb and can accomplish a high percentage of the project missions. For high delta-velocity missions, a bipropellant Propulsion Module (approximately 11,000lb) is added, giving a total weight of 17,500 lb. This module can be exchanged on orbit to effect bipropellant refueling. All the RCS and avionics modules are replaceable on orbit for maintenance. The OMV development program was initiated in 1986 with the selection of TRW as the prime contractor. The first flight is projected for 1991. An early planned use of OMV is to reboost the Hubble Space Telescope when required because of atmospheric drag. This paper contains details of the program status, vehicle description, and mission capabilities. The purpose of the paper is to acquaint the international space community with OMV capabilities and to stimulate the identification of new and unique mission applications.

  12. Power Module Cooling for Future Electric Vehicle Applications: A Coolant Comparison of Oil and PGW

    Science.gov (United States)

    2006-11-01

    POWER MODULE COOLING FOR FUTURE ELECTRIC VEHICLE APPLICATIONS: A COOLANT COMPARISON OF OIL AND PGW T. E. Salem U. S. Naval Academy 105...and efficient power converters are being developed to support the needs of future ground vehicle systems. This progress is being driven by...2006 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Power Module Cooling For Future Electric Vehicle Applications: A Coolant

  13. Application of nodes with multiple orthogonal sensors in moving light vehicles study

    Science.gov (United States)

    Ekimov, Alexander

    2012-06-01

    A sensor node having two types of sensors: sound and seismic units was used for signal collection in a test with different moving light vehicles on a gravel road in a quiet area. An analysis of signals from the node at low frequencies (less than 100 Hz) shows the possibility of tested vehicles detection at long distance. The sound signals for the vehicle motion were detected above the lowest frequencies of 15-20 Hz only while the seismic signals had the maxima in that frequency band. Another test was conducted on the ground to find the common vibrations of a light vehicle and the ground due to vehicle passby in frequencies below 100 Hz. For this signal collection the same sensor node was used. An additional 3-x accelerometer was installed in the vehicle cabin above the transmission. For start time synchronization of recorded signals from the node on the ground and 3-x accelerometer in the vehicle cabin a radio channel was used. Results for this test revealed the vehicle vibrations due to motion were detected on the ground with all three components of the 3-axes geophone for the test track entire distance.

  14. Nuclear air cushion vehicles.

    Science.gov (United States)

    Anderson, J. L.

    1973-01-01

    This paper serves several functions. It identifies the 'state-of-the-art' of the still-conceptual nuclear air cushion vehicle, particularly the nuclear powerplant. Using mission studies and cost estimates, the report describes some of the advantages of nuclear power for large air cushion vehicles. The paper also summarizes the technology studies on mobile nuclear powerplants and conceptual ACV systems/missions studies that have been performed at NASA Lewis Research Center.

  15. HYBRID VEHICLE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-06-01

    Full Text Available The hybrid vehicle control system includes a start–stop system for an internal combustion engine. The system works in a hybrid mode and normal vehicle operation. To simplify the start–stop system, there were user new possibilities of a hybrid car, which appeared after the conversion. Results of the circuit design of the proposed system of basic blocks are analyzed.

  16. Electric vehicles in action

    OpenAIRE

    Wikström, Martina

    2015-01-01

    This thesis analyses the political and practical conditions for introducing electric vehicles in Swedish public authorites and discusses the potential for using electric vehicles in public transport and public fleets. The work has been carried out using an interdisciplinary research approach. Such an approach brings new insights to energy studies; the combination of technical methods and methods from social science allows the technology to be studied in its societal context. Local self-govern...

  17. Vehicle Based Vector Sensor

    Science.gov (United States)

    2015-09-28

    300001 1 of 16 VEHICLE-BASED VECTOR SENSOR STATEMENT OF GOVERNMENT INTEREST [0001] The invention described herein may be manufactured and...unmanned underwater vehicle that can function as an acoustic vector sensor . (2) Description of the Prior Art [0004] It is known that a propagating...mechanics. An acoustic vector sensor measures the particle motion via an accelerometer and combines Attorney Docket No. 300001 2 of 16 the

  18. Vehicle Routing in Practice

    OpenAIRE

    Hasle, Geir

    2010-01-01

    Solving the Vehicle Routing Problem (VRP) is a key to efficiency in transportation and supply chain management. The VRP is a computationally hard problem that comes in many guises. The VRP literature contains thousands of papers, and VRP research is regarded as one of the great successes of OR. In industry and the public sector, vehicle routing tools provide substantial savings every day. An industry of routing tool vendors has emerged. Exact optimization methods of today cannot consistently ...

  19. A review of dynamic characteristics of magnetically levitated vehicle systems

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Y.; Chen, S.S.

    1995-11-01

    The dynamic response of magnetically levitated (maglev) ground transportation systems has important consequences for safety and ride quality, guideway design, and system costs. Ride quality is determined by vehicle response and by environmental factors such as humidity and noise. The dynamic response of the vehicles is the key element in determining ride quality, while vehicle stability is an important safety-related element. To design a guideway that provides acceptable ride quality in the stable region, vehicle dynamics must be understood. Furthermore, the trade-off between guideway smoothness and levitation and control systems must be considered if maglev systems are to be economically feasible. The link between the guideway and the other maglev components is vehicle dynamics. For a commercial maglev system, vehicle dynamics must be analyzed and tested in detail. This report, which reviews various aspects of the dynamic characteristics, experiments and analysis, and design guidelines for maglev systems, discusses vehicle stability, motion dependent magnetic force components, guideway characteristics, vehicle/ guideway interaction, ride quality, suspension control laws, aerodynamic loads and other excitations, and research needs.

  20. A Study of Lane Detection Algorithm for Personal Vehicle

    Science.gov (United States)

    Kobayashi, Kazuyuki; Watanabe, Kajiro; Ohkubo, Tomoyuki; Kurihara, Yosuke

    By the word “Personal vehicle”, we mean a simple and lightweight vehicle expected to emerge as personal ground transportation devices. The motorcycle, electric wheelchair, motor-powered bicycle, etc. are examples of the personal vehicle and have been developed as the useful for transportation for a personal use. Recently, a new types of intelligent personal vehicle called the Segway has been developed which is controlled and stabilized by using on-board intelligent multiple sensors. The demand for needs for such personal vehicles are increasing, 1) to enhance human mobility, 2) to support mobility for elderly person, 3) reduction of environmental burdens. Since rapidly growing personal vehicles' market, a number of accidents caused by human error is also increasing. The accidents are caused by it's drive ability. To enhance or support drive ability as well as to prevent accidents, intelligent assistance is necessary. One of most important elemental functions for personal vehicle is robust lane detection. In this paper, we develop a robust lane detection method for personal vehicle at outdoor environments. The proposed lane detection method employing a 360 degree omni directional camera and unique robust image processing algorithm. In order to detect lanes, combination of template matching technique and Hough transform are employed. The validity of proposed lane detection algorithm is confirmed by actual developed vehicle at various type of sunshined outdoor conditions.