WorldWideScience

Sample records for ground track plotting

  1. Tracking Changes in Cardiac Output: Statistical Considerations on the 4-Quadrant Plot and the Polar Plot Methodology

    National Research Council Canada - National Science Library

    Saugel, Bernd; Grothe, Oliver; Wagner, Julia Y

    2015-01-01

    When comparing 2 technologies for measuring hemodynamic parameters with regard to their ability to track changes, 2 graphical tools are omnipresent in the literaturethe 4-quadrant plot and the polar...

  2. Tracking Changes in Cardiac Output: Statistical Considerations on the 4-Quadrant Plot and the Polar Plot Methodology.

    Science.gov (United States)

    Saugel, Bernd; Grothe, Oliver; Wagner, Julia Y

    2015-08-01

    When comparing 2 technologies for measuring hemodynamic parameters with regard to their ability to track changes, 2 graphical tools are omnipresent in the literature: the 4-quadrant plot and the polar plot recently proposed by Critchley et al. The polar plot is thought to be the more advanced statistical tool, but care should be taken when it comes to its interpretation. The polar plot excludes possibly important measurements from the data. The polar plot transforms the data nonlinearily, which may prevent it from being seen clearly. In this article, we compare the 4-quadrant and the polar plot in detail and thoroughly describe advantages and limitations of each. We also discuss pitfalls concerning the methods to prepare the researcher for the sound use of both methods. Finally, we briefly revisit the Bland-Altman plot for the use in this context.

  3. TrackPlot Enhancements: Support for Multiple Animal Tracks and Gyros

    Science.gov (United States)

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TrackPlot Enhancements: Support for Multiple Animal ...visualization and kinematic analysis of marine animal movements derived from archival tag data. Tags are supported that have sensors for pressure, acceleration...in combination with accelerometer and magnetometer data. 2) the extraction and frequency analysis of accelerations and rotation in animal

  4. DynaMax+ ground-tracking algorithm

    Science.gov (United States)

    Smock, Brandon; Gader, Paul; Wilson, Joseph

    2011-06-01

    In this paper, we propose a new method for performing ground-tracking using ground-penetrating radar (GPR). Ground-tracking involves identifying the air-ground interface, which is usually the dominant feature in a radar image but frequently is obscured or mimicked by other nearby elements. It is an important problem in landmine detection using vehicle-mounted systems because antenna motion, caused by bumpy ground, can introduce distortions in downtrack radar images, which ground-tracking makes it possible to correct. Because landmine detection is performed in real-time, any algorithm for ground-tracking must be able to run quickly, prior to other, more computationally expensive algorithms for detection. In this investigation, we first describe an efficient algorithm, based on dynamic programming, that can be used in real-time for tracking the ground. We then demonstrate its accuracy through a quantitative comparison with other proposed ground-tracking methods, and a qualitative comparison showing that its ground-tracking is consistent with human observations in challenging terrain.

  5. Ground ice and hydrothermal ground motions on aufeis plots of river valleys

    Directory of Open Access Journals (Sweden)

    V. R. Alekseev

    2015-01-01

    Full Text Available Localized groundwater outflow and layered freezing of them in forms of large ice clusters on the surface creates specific conditions for energy and mass exchange in the «atmosphere–soil–lithosphere» system. In winter, the soil temperature profile is essentially deformed due to heat emission by the aufeis layer of water at its freezing that forms a specific thermocline layer. Deformation of the temperature profile, gradually decreasing, moves down the cross-section and disappearing at the interface between frozen and thawed rocks. Magnitude and number of the temperature deviations from a «normal» state depends on the heat storage of the aufeis-forming waters and on the number of outflows at a given point. The thermocline formation changes conditions of freezing for underlying ground layers together with mechanism of ice saturation of them, and that results in formation of two-layer ice-ground complexes (IGC which differ drastically from cryogenic features in adjacent parts of the valley. Analysis of genetic characteristics and relation of components of the surface and subsurface layers allowed identification of seven types of the aufeis IGC: massive-segregation, cement-basal, layered-segregation, basal-segregation, vacuum-filtration, pressureinjection, and fissure-vein. Yearly formation and destruction of aufeises and subsurface ices is accompanied by a sequence of particularly hazardous geodynamical phenomena, among which the most important are winter flooding of territories, layered freezing of water, ground heaving, thermokarst, and thermoerosion. Combination of these processes may cause a rapid (often unexpected reconfiguration of channels of both surface and subsurface runoff, abrupt uplifts and subsidences of the surface, and decompaction and «shaking-up» of seasonally thawing and seasonally freezing rocks, which may create exceptionally unfavorable conditions for construction and operation of engineering structures. Aufeis plots

  6. Computer program TRACK_TEST for calculating parameters and plotting profiles for etch pits in nuclear track materials

    Science.gov (United States)

    Nikezic, D.; Yu, K. N.

    2006-01-01

    A computer program called TRACK_TEST for calculating parameters (lengths of the major and minor axes) and plotting profiles in nuclear track materials resulted from light-ion irradiation and subsequent chemical etching is described. The programming steps are outlined, including calculations of alpha-particle ranges, determination of the distance along the particle trajectory penetrated by the chemical etchant, calculations of track coordinates, determination of the lengths of the major and minor axes and determination of the contour of the track opening. Descriptions of the program are given, including the built-in V functions for the two commonly employed nuclear track materials commercially known as LR 115 (cellulose nitrate) and CR-39 (poly allyl diglycol carbonate) irradiated by alpha particles. Program summaryTitle of the program:TRACK_TEST Catalogue identifier:ADWT Program obtainable from:CPC Program Library, Queen's University of Belfast, N. Ireland Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWT Computer:Pentium PC Operating systems:Windows 95+ Programming language:Fortran 90 Memory required to execute with typical data:256 MB No. of lines in distributed program, including test data, etc.: 2739 No. of bytes in distributed program, including test data, etc.:204 526 Distribution format:tar.gz External subprograms used:The entire code must be linked with the MSFLIB library Nature of problem: Fast heavy charged particles (like alpha particles and other light ions etc.) create latent tracks in some dielectric materials. After chemical etching in aqueous NaOH or KOH solutions, these tracks become visible under an optical microscope. The growth of a track is based on the simultaneous actions of the etchant on undamaged regions (with the bulk etch rate V) and along the particle track (with the track etch rate V). Growth of the track is described satisfactorily by these two parameters ( V and V). Several models have been presented in the past describing

  7. Visualization of ground truth tracks for the video 'Tracking a "facer's" behavior in a public plaza'

    DEFF Research Database (Denmark)

    2015-01-01

    The video shows the ground truth tracks in GIS of all pedestrians in the video 'Tracking a 'facer's" behavior in a public plaza'. The visualization was made using QGIS TimeManager.......The video shows the ground truth tracks in GIS of all pedestrians in the video 'Tracking a 'facer's" behavior in a public plaza'. The visualization was made using QGIS TimeManager....

  8. Visualization of ground truth tracks for the video 'Tracking a "facer's" behavior in a public plaza'

    DEFF Research Database (Denmark)

    2015-01-01

    The video shows the ground truth tracks in GIS of all pedestrians in the video 'Tracking a 'facer's" behavior in a public plaza'. The visualization was made using QGIS TimeManager.......The video shows the ground truth tracks in GIS of all pedestrians in the video 'Tracking a 'facer's" behavior in a public plaza'. The visualization was made using QGIS TimeManager....

  9. Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites

    Science.gov (United States)

    Mitchard, Edward T A; Feldpausch, Ted R; Brienen, Roel J W; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R; Lewis, Simon L; Lloyd, Jon; Quesada, Carlos A; Gloor, Manuel; ter Steege, Hans; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragão, Luiz E O C; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I; Cerón, Carlos E; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R C; Di Fiore, Anthony; Domingues, Tomas F; Erwin, Terry L; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N; Killeen, Tim J; Laurance, William F; Levis, Carolina; Magnusson, William E; Marimon, Beatriz S; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T; Neill, David; Núñez Vargas, Mario P; Palacios, Walter A; Parada, Alexander; Pardo Molina, Guido; Peña-Claros, Marielos; Pitman, Nigel; Peres, Carlos A; Poorter, Lourens; Prieto, Adriana; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H; Rudas, Agustin; Salomão, Rafael P; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F; Steininger, Marc K; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R; van der Heijden, Geertje M F; Vieira, Ima C G; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A; Wang, Ophelia; Zartman, Charles E; Malhi, Yadvinder; Phillips, Oliver L

    2014-01-01

    Aim The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass directly, and thus may miss significant spatial variations in forest structure. We test the stated accuracy of pantropical carbon maps using a large independent field dataset. Location Tropical forests of the Amazon basin. The permanent archive of the field plot data can be accessed at: http://dx.doi.org/10.5521/FORESTPLOTS.NET/2014_1 Methods Two recent pantropical RS maps of vegetation carbon are compared to a unique ground-plot dataset, involving tree measurements in 413 large inventory plots located in nine countries. The RS maps were compared directly to field plots, and kriging of the field data was used to allow area-based comparisons. Results The two RS carbon maps fail to capture the main gradient in Amazon forest carbon detected using 413 ground plots, from the densely wooded tall forests of the north-east, to the light-wooded, shorter forests of the south-west. The differences between plots and RS maps far exceed the uncertainties given in these studies, with whole regions over- or under-estimated by > 25%, whereas regional uncertainties for the maps were reported to be < 5%. Main conclusions Pantropical biomass maps are widely used by governments and by projects aiming to reduce deforestation using carbon offsets, but may have significant regional biases. Carbon-mapping techniques must be revised to account for the known ecological variation in tree wood density and allometry to create maps suitable for carbon accounting. The use of single relationships between tree canopy height and above-ground biomass inevitably yields large, spatially correlated errors. This presents a significant challenge to both the forest conservation and remote sensing communities

  10. Time-lapse 3D ground-penetrating radar during plot-scale infiltration experiments

    Science.gov (United States)

    Allroggen, Niklas; Jackisch, Conrad; Tronicke, Jens

    2016-04-01

    In electrical resistive soils, surface-based ground-penetrating radar (GPR) is known as the geophysical tool providing the highest spatial resolution. Thus, 2D and 3D GPR surveys are commonly used for imaging subsurface structures or estimating soil moisture content. Due to its sensitivity to soil moisture and its non-invasive character, GPR provides a large potential to monitor soil moisture variation at high temporal and spatial resolution. As shown in previous experiments, the acquisition of time-lapse GPR data under field conditions requires a high data quality in terms of repeatability as well as spatial and temporal resolution. We present hydrogeophysical field experiments at the plot scale (1m x 1m), during which we record time-lapse 3D GPR. For GPR data acquisition, we use a pulseEKKO PRO GPR system equipped with a pair of 500 MHz antennas in combination with a specially designed metal-free measuring platform. Additionally, we collect tracer and soil moisture data, which are used to improve the interpretation of the GPR data with special focus on preferential flow paths and their structured advective flow field. After an accurate time-lapse GPR data processing, we compare 3D reflection events before and after infiltration and quantitatively interpret their relative time-shift in terms of soil moisture variations. Thereby, we are able to account for basically all of the infiltrated water. The first experiments demonstrate the general applicability of our experimental approach but are limited by the number of acquired time steps and measurement during the sprinkling period (the time of the highest temporal dynamics) are not possible at all. Based on this experience we redesign our experimental setup to continuously collect GPR data during irrigation and infiltration. Thereby, we strongly increase the temporal resolution of our measurements, improve the interpretability of the GPR data, and monitor the temporal and spatial dynamics of shallow subsurface

  11. Low Cost Intelligent Pervasive Location Tracking (iPLOT) in All Environments for the Management of Crime

    Science.gov (United States)

    Mautz, Rainer; Ochieng, Washington; Walsh, David; Brodin, Gary; Kemp, Andy; Cooper, John; Son Le, Thanh

    2006-05-01

    This paper details the current status of the development of an ‘automatic’ low-cost system based on wireless communications technology to provide continuous tracking of the location of devices in all environments. This task requires a multi-disciplinary approach combining communications systems design, digital signal processing to extract ranges and, importantly, approaches from the field of geodesy to develop novel network positioning techniques for ad-hoc networks. Such a network will support a number of services relevant to crime management where seamless tracking is required. The paper discusses the process for developing the system, christened intelligent pervasive location tracking (iPLOT), with a particular reference to user and system requirements, and how these have been used to explore a network positioning strategy.

  12. A ground moving target emergency tracking method for catastrophe rescue

    Science.gov (United States)

    Zhou, X.; Li, D.; Li, G.

    2014-11-01

    In recent years, great disasters happen now and then. Disaster management test the emergency operation ability of the government and society all over the world. Immediately after the occurrence of a great disaster (e.g., earthquake), a massive nationwide rescue and relief operation need to be kicked off instantly. In order to improve the organizations efficiency of the emergency rescue, the organizers need to take charge of the information of the rescuer teams, including the real time location, the equipment with the team, the technical skills of the rescuers, and so on. One of the key factors for the success of emergency operations is the real time location of the rescuers dynamically. Real time tracking methods are used to track the professional rescuer teams now. But volunteers' participation play more and more important roles in great disasters. However, real time tracking of the volunteers will cause many problems, e.g., privacy leakage, expensive data consumption, etc. These problems may reduce the enthusiasm of volunteers' participation for catastrophe rescue. In fact, the great disaster is just small probability event, it is not necessary to track the volunteers (even rescuer teams) every time every day. In order to solve this problem, a ground moving target emergency tracking method for catastrophe rescue is presented in this paper. In this method, the handheld devices using GPS technology to provide the location of the users, e.g., smart phone, is used as the positioning equipment; an emergency tracking information database including the ID of the ground moving target (including the rescuer teams and volunteers), the communication number of the handheld devices with the moving target, and the usually living region, etc., is built in advance by registration; when catastrophe happens, the ground moving targets that living close to the disaster area will be filtered by the usually living region; then the activation short message will be sent to the selected

  13. Tracking wireless bio-medical sensors:result validation with the bland-altman plots

    OpenAIRE

    Arshak, Khalil; Adepoju, Francis

    2008-01-01

    peer-reviewed In this paper, we present a series of experimental results of tracking an embedded sensor object similar in physical characteristics to telemetry capsules in the gastro-intestinal (GI) tract using radio frequency (RF) signals. A fair description of implementation detail is given in the body of the paper while focus is on analyzing the experimental results. Experiments were based on a test capsule transmitting radio frequency (RF) signals pulses a...

  14. Scaling up high throughput field phenotyping of corn and soy research plots using ground rovers

    Science.gov (United States)

    Peshlov, Boyan; Nakarmi, Akash; Baldwin, Steven; Essner, Scott; French, Jasenka

    2017-05-01

    Crop improvement programs require large and meticulous selection processes that effectively and accurately collect and analyze data to generate quality plant products as efficiently as possible, develop superior cropping and/or crop improvement methods. Typically, data collection for such testing is performed by field teams using hand-held instruments or manually-controlled devices. Although steps are taken to reduce error, the data collected in such manner can be unreliable due to human error and fatigue, which reduces the ability to make accurate selection decisions. Monsanto engineering teams have developed a high-clearance mobile platform (Rover) as a step towards high throughput and high accuracy phenotyping at an industrial scale. The rovers are equipped with GPS navigation, multiple cameras and sensors and on-board computers to acquire data and compute plant vigor metrics per plot. The supporting IT systems enable automatic path planning, plot identification, image and point cloud data QA/QC and near real-time analysis where results are streamed to enterprise databases for additional statistical analysis and product advancement decisions. Since the rover program was launched in North America in 2013, the number of research plots we can analyze in a growing season has expanded dramatically. This work describes some of the successes and challenges in scaling up of the rover platform for automated phenotyping to enable science at scale.

  15. Ground Penetrating Radar technique for railway track characterization in Portugal

    Science.gov (United States)

    De Chiara, Francesca; Fontul, Simona; Fortunato, Eduardo; D'Andrea, Antonio

    2013-04-01

    Maintenance actions are significant for transport infrastructures but, today, costs have to be necessary limited. A proper quality control since the construction phase is a key factor for a long life cycle and for a good economy policy. For this reason, suitable techniques have to be chosen and non-destructive tests represent an efficient solution, as they allow to evaluate infrastructure characteristics in a continuous or quasi-continuous way, saving time and costs, enabling to make changes if tests results do not comply with the project requirements. Ground Penetrating Radar (GPR) is a quick and effective technique to evaluate infrastructure condition in a continuous manner, replacing or reducing the use of traditional drilling method. GPR application to railways infrastructures, during construction and monitoring phase, is relatively recent. It is based on the measuring of layers thicknesses and detection of structural changes. It also enables the assessment of materials properties that constitute the infrastructure and the evaluation of the different types of defects such as ballast pockets, fouled ballast, poor drainage, subgrade settlement and transitions problems. These deteriorations are generally the causes of vertical deviations in track geometry and they cannot be detected by the common monitoring procedures, namely the measurements of track geometry. Moreover, the development of new GPR systems with higher antenna frequencies, better data acquisition systems, more user friendly software and new algorithms for calculation of materials properties can lead to a regular use of GPR. Therefore, it represents a reliable technique to assess track geometry problems and consequently to improve maintenance planning. In Portugal, rail inspection is performed with Plasser & Theurer EM120 equipment and recently 400 MHz IDS antennas were installed on it. GPR tests were performed on the Portuguese rail network and, as case study in this paper, a renewed track was

  16. Application of Road Information in Ground Moving Target Tracking

    Institute of Scientific and Technical Information of China (English)

    Zhen Xinyan; Zhao Wei

    2007-01-01

    A new algorithm is developed to achieve accurate state estimation in ground moving target tracking by means of using road information. It is an adaptive variable structure interacting multiple model estimator with dynamic models modification (DMM VS-IMM for short). Firstly, road information is employed to modify the target dynamic models used by filter, including modification of state transition matrix and process noise. Secondly, road information is applied to update the model set of a VS-IMM estimator. Predicted state estimation and road information are used to locate the target in the road network on which the model set is updated and finally IMM filtering is implemented. As compared with traditional methods, the accuracy of state estimation is improved for target moving not only on a single road, but also through an intersection. Monte Carlo simulation demonstrates the efficiency and robustness of the proposed algorithm with moderate computational loads.

  17. visPIG--a web tool for producing multi-region, multi-track, multi-scale plots of genetic data.

    Directory of Open Access Journals (Sweden)

    Matthew Scales

    Full Text Available We present VISual Plotting Interface for Genetics (visPIG; http://vispig.icr.ac.uk, a web application to produce multi-track, multi-scale, multi-region plots of genetic data. visPIG has been designed to allow users not well versed with mathematical software packages and/or programming languages such as R, Matlab®, Python, etc., to integrate data from multiple sources for interpretation and to easily create publication-ready figures. While web tools such as the UCSC Genome Browser or the WashU Epigenome Browser allow custom data uploads, such tools are primarily designed for data exploration. This is also true for the desktop-run Integrative Genomics Viewer (IGV. Other locally run data visualisation software such as Circos require significant computer skills of the user. The visPIG web application is a menu-based interface that allows users to upload custom data tracks and set track-specific parameters. Figures can be downloaded as PDF or PNG files. For sensitive data, the underlying R code can also be downloaded and run locally. visPIG is multi-track: it can display many different data types (e.g association, functional annotation, intensity, interaction, heat map data,…. It also allows annotation of genes and other custom features in the plotted region(s. Data tracks can be plotted individually or on a single figure. visPIG is multi-region: it supports plotting multiple regions, be they kilo- or megabases apart or even on different chromosomes. Finally, visPIG is multi-scale: a sub-region of particular interest can be 'zoomed' in. We describe the various features of visPIG and illustrate its utility with examples. visPIG is freely available through http://vispig.icr.ac.uk under a GNU General Public License (GPLv3.

  18. State estimators for tracking sharply-maneuvering ground targets

    Science.gov (United States)

    Visina, Radu S.; Bar-Shalom, Yaakov; Willett, Peter

    2017-05-01

    This paper presents an algorithm, based on the Interacting Multiple Model Estimator, that can be used to track the state of kinematic point targets, moving in two dimensions, that are capable of making sharp heading maneuvers over short periods of time, such as certain ground vehicles moving in an open field. The targets are capable of up to 60 °/s turn rates, while polar measurements are received at 1 Hz. We introduce the Non-Zero Mean, White Noise Turn-Rate IMM (IMM-WNTR) that consists of 3 modes based on a White Noise Turn Rate (WNTR) kinematic model that contains additive, white, Gaussian turn rate process noises. Two of the modes are considered maneuvering modes, and they have opposite (left/right), non-zero mean turn rate input noise. The need for non-zero mean turn rate process noise is explained, and Monte Carlo simulations compare this novel design to the traditional (single-mode) White Noise Acceleration Kalman Filter (WNA KF) and the two-mode White Noise Acceleration/Nearly-Coordinated Turn Rate IMM (IMM-CT). Results show that the IMM-WNTR filter achieves better accuracy and real-time consistency between expected error and actual error as compared to the (single-mode) WNA KF and the IMM-CT in all simulated scenarios, making it a very accurate state estimator for targets with sharp coordinated turn capability in 2D.

  19. Ground moving target processing for tracking selected targets

    Science.gov (United States)

    Nichols, Howard; Majumder, Uttam; Owirka, Gregory; Finn, Lucas

    2016-05-01

    BAE Systems has developed a baseline real-time selected vehicle (SV) radar tracking capability that successfully tracked multiple civilian vehicles in real-world traffic conditions within challenging semi-urban clutter. This real-time tracking capability was demonstrated in laboratory setting. Recent enhancements to the baseline capability include multiple detection modes, improvements to the system-level design, and a wide-area tracking mode. The multiple detection modes support two tracking regimes; wide-area and localized selected vehicle tracking. These two tracking regimes have distinct challenges that may be suited to different trackers. Incorporation of a wide-area tracking mode provides both situational awareness and the potential for enhancing SV track initiation. Improvements to the system-level design simplify the integration of multiple detection modes and more realistic SV track initiation capabilities. Improvements are designed to contribute to a comprehensive tracking capability that exploits a continuous stare paradigm. In this paper, focus will be on the challenges, design considerations, and integration of selected vehicle tracking.

  20. Use of a line intercept snow track index and plot sampling for estimating densities of wild boar (Sus scrofa in southwestern Poland

    Directory of Open Access Journals (Sweden)

    B. Bobek

    2014-03-01

    Full Text Available n Bory Dolnośląskie Forest (southwestern Poland, in 8 forest districts with a total of 121,783 hectares (ha of forest area, 16 sampling plots of a total area of 7,100 ha were marked. Using the block count method, the presence of 157 wild boars was found in 12 sampling plots where the population density ranged from 2.2 to 52.9 individuals/1000 ha. By counting snow tracks along 16 line transects situated within the sampling plots (total length – 70.9 km, the presence of 103 wild boars was found. In places where tracks of wild boars were found, the relative population density of this species ranged from 0.10 to 5.6 individuals/km of transect. Using non-linear regression, a mathematical formula was derived where the relative population density index (N/km was the independent variable, and the absolute population density (N/1000 ha was the dependent variable. A high correlation was found between these variables (R2=0.85. It is suggested that the population numbers evaluated by snow tracks of wild boars found on line transects, and the regression equation derived in this study be used in the management of this species.

  1. Plotting of Flight Track for Flight Training Simulator%某飞行训练模拟器飞行轨迹绘制

    Institute of Scientific and Technical Information of China (English)

    谢保川

    2011-01-01

    GDI + is a subsystem of windows operating system. It packs the API of plotting graph into library. It provides a uniform plot program model under tbe anvironment irrespective device. It achieves the alternation conveniently and quickly between application and graphics device. Flight track provides visual airplane position display for flight instructor. Combined the development of flight simulator,the flight track display system is developed with the use of GDI + under Visual C#. Net. The display of the flight track is based on the technique of dual-buffer. The technique of dual-buffer is that virtual canvas based on the memory on which the graph is plotted is plotted on thn form.%GDI+(图形设备接口)是Windows操作系统的一个子系统,它把Windows中关于绘制图形的API函数封装在一组类中,在一种与设备无关的环境下提供了一套统一的绘图编程模型,利用GDI+可方便快捷地实现应用程序与图形设备的交互.飞行模拟器的飞行轨迹为教员提供了直观的飞机位置显示,结合某型飞行模拟器的研制,采用GDI+,通过先在内存建立一块"虚拟画布",然后将需要画的图形先画在这块"虚拟画布"上,最后再一次性将整块"虚拟画布"画到真正的窗体上这样的"双缓冲"技术,在Visual C#.Net下对飞行模拟器的飞行轨迹进行了绘制.

  2. Reduction of Ground Vibration by Means of Barriers or Soil Improvement along a Railway Track

    DEFF Research Database (Denmark)

    Andersen, Lars; Nielsen, Søren R.K.

    2005-01-01

    Trains running in built-up areas are a source to ground-borne noise. A careful design of the track may be one way of minimizing the vibrations in the surroundings. For example, open or infilled trenches may be constructed along the track, or the soil underneath the track may be improved. In this ......Trains running in built-up areas are a source to ground-borne noise. A careful design of the track may be one way of minimizing the vibrations in the surroundings. For example, open or infilled trenches may be constructed along the track, or the soil underneath the track may be improved...... the vehicle. The computations are carried out in the frequency domain for various combinations of the vehicle speed and the excitation frequency. The analyses indicate that open trenches are more efficient than infilled trenches or soil stiffening–even at low frequencies. However, the direction of the load...

  3. Probabilistic Tracking and Trajectory Planning for Autonomous Ground Vehicles in Urban Environments

    Science.gov (United States)

    2016-03-05

    SECURITY CLASSIFICATION OF: The aim of this research is to develop a unified theory for perception and planning in autonomous ground vehicles , with a...Pine Tree Road Ithaca, NY 14850 -2820 ABSTRACT Probabilistic Tracking and Trajectory Planning for Autonomous Ground Vehicles in Urban Environments...Report Title The aim of this research is to develop a unified theory for perception and planning in autonomous ground vehicles , with a specific focus on

  4. Use of a ground-water flow model with particle tracking to evaluate ground-water vulnerability, Clark County, Washington

    Science.gov (United States)

    Snyder, D.T.; Wilkinson, J.M.; Orzol, L.L.

    1996-01-01

    A ground-water flow model was used in conjunction with particle tracking to evaluate ground-water vulnerability in Clark County, Washington. Using the particle-tracking program, particles were placed in every cell of the flow model (about 60,000 particles) and tracked backwards in time and space upgradient along flow paths to their recharge points. A new computer program was developed that interfaces the results from a particle-tracking program with a geographic information system (GIS). The GIS was used to display and analyze the particle-tracking results. Ground-water vulnerability was evaluated by selecting parts of the ground-water flow system and combining the results with ancillary information stored in the GIS to determine recharge areas, characteristics of recharge areas, downgradient impact of land use at recharge areas, and age of ground water. Maps of the recharge areas for each hydrogeologic unit illustrate the presence of local, intermediate, or regional ground-water flow systems and emphasize the three-dimensional nature of the ground-water flow system in Clark County. Maps of the recharge points for each hydrogeologic unit were overlaid with maps depicting aquifer sensitivity as determined by DRASTIC (a measure of the pollution potential of ground water, based on the intrinsic characteristics of the near-surface unsaturated and saturated zones) and recharge from on-site waste-disposal systems. A large number of recharge areas were identified, particularly in southern Clark County, that have a high aquifer sensitivity, coincide with areas of recharge from on-site waste-disposal systems, or both. Using the GIS, the characteristics of the recharge areas were related to the downgradient parts of the ground-water system that will eventually receive flow that has recharged through these areas. The aquifer sensitivity, as indicated by DRASTIC, of the recharge areas for downgradient parts of the flow system was mapped for each hydrogeologic unit. A number of

  5. Impact of mesh tracks and low-ground-pressure vehicle use on blanket peat hydrology

    Science.gov (United States)

    McKendrick-Smith, Kathryn; Holden, Joseph; Parry, Lauren

    2016-04-01

    Peatlands are subject to multiple uses including drainage, farming and recreation. Low-ground-pressure vehicle access is desirable by land owners and tracks facilitate access. However, there is concern that such activity may impact peat hydrology and so granting permission for track installation has been problematic, particularly without evidence for decision-making. We present the first comprehensive study of mesh track and low-ground-pressure vehicle impacts on peatland hydrology. In the sub-arctic oceanic climate of the Moor House World Biosphere Reserve in the North Pennines, UK, a 1.5 km long experimental track was installed to investigate hydrological impacts. Surface vegetation was cut and the plastic mesh track pinned into the peat surface. The experimental track was split into 7 treatments, designed to reflect typical track usage (0 - 5 vehicle passes per week) and varying vehicle weight. The greatest hydrological impacts were expected for sections of track subject to more frequent vehicle use and in close proximity to the track. In total 554 dipwells (including 15 automated recording at 15-min intervals) were monitored for water-table depth, positioned to capture potential spatial variability in response. Before track installation, samples for vertical and lateral hydraulic conductivity (Ks) analysis (using the modified cube method) were taken at 0-10 cm depth from a frequently driven treatment (n = 15), an infrequently driven treatment (0.5 passes per week) (n = 15) and a control site with no track/driving (n = 15). The test was repeated after 16 months of track use. We present a spatially and temporally rich water-table dataset from the study site showing how the impacts of the track on water table are spatially highly variable. Water-table depths across the site were shallow, typically within the upper 10 cm of the peat profile for > 75% of the time. We show that mesh track and low-ground-pressure vehicle impacts on water-table depth were small except

  6. Vector Pursuit Path Tracking for Autonomous Ground Vehicles

    Science.gov (United States)

    2000-08-01

    collision avoidance for a mobile robot,” Robotica , v12, 1994, p521-527. [30] Saffiotti, A., Ruspini, E. H. and Konolige, K., “Blending Reactivity and...based collision avoidance for a mobile robot,” Robotica , v15, 1997, p627-632. [43] Hoffman, F. and Pfister, G., “Evolutionary Design of a Fuzzy...DeSantis, R. M., “Modeling and path-tracking control of a mobile wheeled robot with a differential drive,” Robotica , v13, 1995, p401-410. [49

  7. A study on the nondestructive test optimum design for a ground tracked combat vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Kim Byeong Ho; Seo, Jae Hyun; Gil, Hyeon Jun [Defence Agency for Technology and Quality, Seoul (Korea, Republic of); Kim, Seon Hyeong [Hanwha Techwin Co.,Ltd., Changwon (Korea, Republic of); Seo, Sang Chul [Changwon National University, Changwon (Korea, Republic of)

    2015-10-15

    In this study, a nondestructive test (NDT) is performed to inspect the optimal design of a ground tracked combat vehicle for self-propelled artillery, tank, and armored vehicles. The minimum qualification required for personnel performing the NDT of a ground tracked combat vehicle was initially established in US military standards, and then applied to the Korean defense specifications to develop a ground tracked combat vehicle. However, the qualification standards of an NDT inspector have been integrated into NAS410 through the military and commercial specifications unification project that were applied in the existing aerospace/defense industry public standard. The design method for this study was verified by applying the optimal design to the liquid penetrant testing Al forging used in self-propelled artillery. This confirmed the reliability and soundness of the product.

  8. Subjective evaluation with FAA criteria: A multidimensional scaling approach. [ground track control management

    Science.gov (United States)

    Kreifeldt, J. G.; Parkin, L.; Wempe, T. E.; Huff, E. F.

    1975-01-01

    Perceived orderliness in the ground tracks of five A/C during their simulated flights was studied. Dynamically developing ground tracks for five A/C from 21 separate runs were reproduced from computer storage and displayed on CRTS to professional pilots and controllers for their evaluations and preferences under several criteria. The ground tracks were developed in 20 seconds as opposed to the 5 minutes of simulated flight using speedup techniques for display. Metric and nonmetric multidimensional scaling techniques are being used to analyze the subjective responses in an effort to: (1) determine the meaningfulness of basing decisions on such complex subjective criteria; (2) compare pilot/controller perceptual spaces; (3) determine the dimensionality of the subjects' perceptual spaces; and thereby (4) determine objective measures suitable for comparing alternative traffic management simulations.

  9. Tracking Non-stellar Objects on Ground and in Space

    DEFF Research Database (Denmark)

    Riis, Troels; Jørgensen, John Leif

    1999-01-01

    Many space exploration missions require a fast, early and accurate detection of a specific target. E.g. missions to asteroids, x-ray source missions or interplanetary missions.A second generation star tracker may be used for accurate detection of non-stellar objects of interest for such missions...... approximately down to CCD magnitude mv 7.5), the objects thus listed will include galaxies, nebulae, planets, asteroids, comets and artefacts as satellites.The angular resolution in inertial reference coordinates is a few arcseconds, allowing quite accurate tracking of these objects. Furthermore, the objects...... are easily divided into two classes; Stationary (galaxies, nebulae etc.), and moving object (planets, asteroids, satellite etc.).For missions targeting moving objects, detection down to mv 11 is possible without any system impacts, simply by comparing lists of objects with regular intervals, leaving out all...

  10. Real-time Gaussian Markov random-field-based ground tracking for ground penetrating radar data

    Science.gov (United States)

    Bradbury, Kyle; Torrione, Peter A.; Collins, Leslie

    2009-05-01

    Current ground penetrating radar algorithms for landmine detection require accurate estimates of the location of the air/ground interface to maintain high levels of performance. However, the presence of surface clutter, natural soil roughness, and antenna motion lead to uncertainty in these estimates. Previous work on improving estimates of the location of the air/ground interface have focused on one-dimensional filtering techniques to localize the air/ground interface. In this work, we propose an algorithm for interface localization using a 2- D Gaussian Markov random field (GMRF). The GMRF provides a statistical model of the surface structure, which enables the application of statistical optimization techniques. In this work, the ground location is inferred using iterated conditional modes (ICM) optimization which maximizes the conditional pseudo-likelihood of the GMRF at a point, conditioned on its neighbors. To illustrate the efficacy of the proposed interface localization approach, pre-screener performance with and without the proposed ground localization algorithm is compared. We show that accurate localization of the air/ground interface provides the potential for future performance improvements.

  11. Passive acoustic tracking of singing humpback whales (Megaptera novaeangliae) on a northwest Atlantic feeding ground.

    Science.gov (United States)

    Stanistreet, Joy E; Risch, Denise; Van Parijs, Sofie M

    2013-01-01

    Passive acoustic tracking provides an unobtrusive method of studying the movement of sound-producing animals in the marine environment where traditional tracking methods may be costly or infeasible. We used passive acoustic tracking to characterize the fine-scale movements of singing humpback whales (Megaptera novaeangliae) on a northwest Atlantic feeding ground. Male humpback whales produce complex songs, a phenomenon that is well documented in tropical regions during the winter breeding season, but also occurs at higher latitudes during other times of year. Acoustic recordings were made throughout 2009 using an array of autonomous recording units deployed in the Stellwagen Bank National Marine Sanctuary. Song was recorded during spring and fall, and individual singing whales were localized and tracked throughout the array using a correlation sum estimation method on the time-synchronized recordings. Tracks were constructed for forty-three song sessions, revealing a high level of variation in movement patterns in both the spring and fall seasons, ranging from slow meandering to faster directional movement. Tracks were 30 min to 8 h in duration, and singers traveled distances ranging from 0.9 to 20.1 km. Mean swimming speed was 2.06 km/h (SD 0.95). Patterns and rates of movement indicated that most singers were actively swimming. In one case, two singers were tracked simultaneously, revealing a potential acoustic interaction. Our results provide a first description of the movements of singers on a northwest Atlantic feeding ground, and demonstrate the utility of passive acoustic tracking for studying the fine-scale movements of cetaceans within the behavioral context of their calls. These methods have further applications for conservation and management purposes, particularly by enhancing our ability to estimate cetacean densities using passive acoustic monitoring.

  12. Plot 3

    DEFF Research Database (Denmark)

    Lund, Inger-Lise; Gjessing, Susanne; Hermansen, Anne-Mette

    Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning.......Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning....

  13. Plot 3

    DEFF Research Database (Denmark)

    Lund, Inger-Lise; Gjessing, Susanne; Hermansen, Anne-Mette

    Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning.......Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning....

  14. Low-Cost Tracking Ground Terminal Designed to Use Cryogenically Cooled Electronics

    Science.gov (United States)

    Wald, Lawrence W.; Romanofsky, Robert R.; Warner, Joseph D.

    2000-01-01

    A computer-controlled, tracking ground terminal will be assembled at the NASA Glenn Research Center at Lewis Field to receive signals transmitted by the Glenn's Direct Data Distribution (D3) payload planned for a shuttle flight in low Earth orbit. The terminal will enable direct data reception of up to two 622-megabits-per-second (Mbps) beams from the space-based, K-band (19.05-GHz) transmitting array at an end-user bit error rate of up to 10(exp -12). The ground terminal will include a 0.9-m-diameter receive-only Cassegrain reflector antenna with a corrugated feed horn incorporating a dual circularly polarized, K-band feed assembly mounted on a multiaxis, gimbaled tracking pedestal as well as electronics to receive the downlink signals. The tracking system will acquire and automatically track the shuttle through the sky for all elevations greater than 20 above the horizon. The receiving electronics for the ground terminal consist of a six-pole microstrip bandpass filter, a three-stage monolithic microwave integrated circuit (MMIC) amplifier, and a Stirling cycle cryocooler (1 W at 80 K). The Sterling cycle cryocooler cools the front end of the receiver, also known as the low-noise amplifier (LNA), to about 77 K. Cryocooling the LNA significantly increases receiver performance, which is necessary so that it can use the antenna, which has an aperture of only 0.9 m. The following drawing illustrates the cryoterminal.

  15. A 2.5D finite element approach for predicting ground vibrations generated by vertical track irregularities

    Institute of Scientific and Technical Information of China (English)

    Xue-cheng BIAN; Chang CHAO; Wan-feng JIN; Yun-min CHEN

    2011-01-01

    Dynamic responses of track structure and wave propagation in nearby ground vibration become significant when train operates on high speeds.A train-track-ground dynamic interaction analysis model based on the 2.5D finite element method is developed for the prediction of ground vibrations due to vertical track irregularities.The one-quarter car model is used to represent the train as lumped masses connected by springs.The embankment and the underlying ground are modeled by the 2.5D finite element approach to improve the computation efficiency.The Fourier transform is applied in the direction of train's movement to express the wave motion with a wave-number.The one-quarter car model is coupled into the global stiffness matrix describing the track-ground dynamic system with the displacement compatibility condition at the wheel-rail interface,including the irregularities on the track surface.Dynamic responses of the track and ground due to train's moving loads are obtained in the wave-number domain by solving the governing equation,using a conventional finite element procedure.The amplitude and wavelength are identified as two major parameters describing track irregularities.The irregularity amplitude has a direct impact on the vertical response for low-speed trains,both for short wavelength and long wavelength irregularities.Track irregularity with shorter wavelength can generate stronger track vibration both for low-speed and high-speed cases.For low-speed case,vibrations induced by track irregularities dominate far field responses.For high-speed case,the wavelength of track irregularities has very little effect on ground vibration at distances far from track center,and train's wheel axle weights becomes dominant.

  16. Curved Track Analysis of FSO Link for Ground-to-Train Communications

    Directory of Open Access Journals (Sweden)

    R. Paudel

    2014-04-01

    Full Text Available In this work, a free space optical (FSO link for the ground-to-train (G2T-FSO communications is proposed. Analytical analysis is carried out for the curved rail tracks. We show that the transmitter divergence angle, the transmit power and the size of the concentration lens need to increase for the curved section of the rail track compared to the straight track. We derive the analytical expression for the received power level based on the link geometry for the case of the curved track In the worst case scenario when the curvature radius is 120 m, the transmit power at the optical base station (BS needs to increase by over 2 dB when the concentration lens radius is increased by 5 times. Analyses also show that the received power along the track increases with the curvature radius for the same transmit power and receiver optics illustrating the effect due to link geometry. Additionally, the signal-to-noise ratio (SNR and the bit error rate (BER performance of the system for the curved track with different curvature radii is analysed at data rates of 10 Mbps and 100 Mbps for an additive white Gaussian noise (AWGN channel showing a good agreement between the theoretical and the simulated BER. Finally, effect of scintillations on the G2T-FSO link performance is discussed.

  17. Ground Simulation of an Autonomous Satellite Rendezvous and Tracking System Using Dual Robotic Systems

    Science.gov (United States)

    Trube, Matthew J.; Hyslop, Andrew M.; Carignan, Craig R.; Easley, Joseph W.

    2012-01-01

    A hardware-in-the-loop ground system was developed for simulating a robotic servicer spacecraft tracking a target satellite at short range. A relative navigation sensor package "Argon" is mounted on the end-effector of a Fanuc 430 manipulator, which functions as the base platform of the robotic spacecraft servicer. Machine vision algorithms estimate the pose of the target spacecraft, mounted on a Rotopod R-2000 platform, relay the solution to a simulation of the servicer spacecraft running in "Freespace", which performs guidance, navigation and control functions, integrates dynamics, and issues motion commands to a Fanuc platform controller so that it tracks the simulated servicer spacecraft. Results will be reviewed for several satellite motion scenarios at different ranges. Key words: robotics, satellite, servicing, guidance, navigation, tracking, control, docking.

  18. A mixed space-time and wavenumber-frequency domain procedure for modelling ground vibration from surface railway tracks

    Science.gov (United States)

    Koroma, S. G.; Thompson, D. J.; Hussein, M. F. M.; Ntotsios, E.

    2017-07-01

    This paper presents a methodology for studying ground vibration in which the railway track is modelled in the space-time domain using the finite element method (FEM) and, for faster computation, discretisation of the ground using either FEM or the boundary element method (BEM) is avoided by modelling it in the wavenumber-frequency domain. The railway track is coupled to the ground through a series of rectangular strips located at the surface of the ground; their vertical interaction is described by a frequency-dependent dynamic stiffness matrix whose elements are represented by discrete lumped parameter models. The effectiveness of this approach is assessed firstly through frequency domain analysis using as excitation a stationary harmonic load applied on the rail. The interaction forces at the ballast/ground interface are calculated using the FE track model in the space-time domain, transformed to the wavenumber domain, and used as input to the ground model for calculating vibration in the free field. Additionally, time domain simulations are also performed with the inclusion of nonlinear track parameters. Results are presented for the coupled track/ground model in terms of time histories and frequency spectra for the track vibration, interaction forces and free-field ground vibration. For the linear track model, the results from the mixed formulation are in excellent agreement with those from a semi-analytical model formulated in the wavenumber-frequency domain, particularly in the vicinity of the loading point. The accuracy of the mixed formulation away from the excitation point depends strongly on the inclusion of through-ground coupling in the lumped parameter model, which has been found to be necessary for both track dynamics and ground vibration predictions.

  19. Research on the acquisition and tracking simulation system of light beacon in satellite-ground optical communications

    Institute of Scientific and Technical Information of China (English)

    ZUO Tao; AI Yong; HUANG Hai-bo; SU Gui-bo

    2010-01-01

    @@ The study on the acquisition and tracking simulation system in satellite-ground optical communications is presented here.By applying global positioning system(GPS)coordinate calculation,the time needed in initial acquisition of light beacon can be reduced largely.Smith predictor is applied to compensate the mechanical hysteresis of tracking system and to improve the dynamic performance of the system.Tracking experiments over a i 6 km distance on the ground are conducted to verify the tracking of light beacon in satellite-ground optical communications.The standard deviation of horizontal coordinates is 35.3568 μrad and the maximum offset is 209.3675 μrad in stable tracking.

  20. Plot 4

    DEFF Research Database (Denmark)

    Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

    Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 4, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

  1. Plot 5

    DEFF Research Database (Denmark)

    Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

    Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 5, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

  2. Plotting Conflict.

    Science.gov (United States)

    Wilkinson, Margaret Ann; Wilkinson, John Provost

    1997-01-01

    Conflict management theory is illustrated in a series of hypothetical scenarios, typical of library situations. Each scenario is discussed in terms of a specific management theory and the theories are transposed into useful management tools by plotting each situation along relevant axes. (Author/AEF)

  3. Plot 5

    DEFF Research Database (Denmark)

    Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

    Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 5, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

  4. Train-induced field vibration measurements of ground and over-track buildings.

    Science.gov (United States)

    Zou, Chao; Wang, Yimin; Moore, James A; Sanayei, Masoud

    2017-01-01

    Transit-oriented development, such as metro depot and over-track building complexes, has expanded rapidly over the last 5years in China. Over-track building construction has the advantage of comprehensive utilization of land resources, ease of commuting to work, and provide funds for subway construction. But the high frequency of subway operations into and out of the depots can generate excessive vibrations that transmit into the over track buildings, radiate noise within the buildings, hamper the operation of vibration sensitive equipment, and adversely affect the living quality of the building occupants. Field measurements of vibration during subway operations were conducted at Shenzhen, China, a city of 10.62 million people in southern China. Considering the metro depot train testing line and throat area train lines were the main vibration sources, vibration data were captured in five measurement setups. The train-induced vibrations were obtained and compared with limitation of FTA criteria. The structure-radiated noise was calculated using measured vibration levels. The vertical vibration energy directly passed through the columns on both sides of track into the platform, amplifying vibration on the platform by up to 6dB greater than ground levels at testing line area. Vibration amplification around the natural frequency in the vertical direction of over-track building made the peak values of indoor floor vibration about 16dB greater than outdoor platform vibration. We recommend to carefully examining design of new over-track buildings within 40m on the platform over the throat area to avoid excessive vertical vibrations and noise. For both buildings, the measured vertical vibrations were less than the FTA limit. However, it is demonstrated that the traffic-induced high-frequency noise has the potential to annoy occupants on the upper floors.

  5. Constellation design for earth observation based on the characteristics of the satellite ground track

    Science.gov (United States)

    Luo, Xin; Wang, Maocai; Dai, Guangming; Song, Zhiming

    2017-04-01

    This paper responds to the increasing need for Earth observation missions and deals with the design of Repeating Sun-Synchronous Constellations (RSSCs) which takes into consideration of constellations composed of one or more orbital planes. Based on the mature design approach of Repeating Sun-synchronous orbits, a novel technique to design RSSCs is presented, which takes the second gravitational zonal harmonic into consideration. In order to obtain regular cycles of observation of the Earth by a single satellite, the orbital relationships have to be satisfied firstly are illustrated. Then, by making full analyses of the characteristics of the satellite ground track, orbital parameters are properly calculated to make other satellites pass on the same or different ground track of the single satellite. Last, single-plane or multi-plane constellations are used to improve the repetitions of the observation and the ground resolution. RSSCs allow observing the same region once at the same local time in a solar day and several times at the different local time in a solar day. Therefore, this kind of constellations meets all requirements for the remote sensing applications, which need to observe the same region under the same or different visible conditions. Through various case studies, the calculation technique is successfully demonstrated.

  6. Navigating the Return Trip from the Moon Using Earth-Based Ground Tracking and GPS

    Science.gov (United States)

    Berry, Kevin; Carpenter, Russell; Moreau, Michael C.; Lee, Taesul; Holt, Gregg N.

    2009-01-01

    NASA s Constellation Program is planning a human return to the Moon late in the next decade. From a navigation perspective, one of the most critical phases of a lunar mission is the series of burns performed to leave lunar orbit, insert onto a trans-Earth trajectory, and target a precise re-entry corridor in the Earth s atmosphere. A study was conducted to examine sensitivity of the navigation performance during this phase of the mission to the type and availability of tracking data from Earth-based ground stations, and the sensitivity to key error sources. This study also investigated whether GPS measurements could be used to augment Earth-based tracking data, and how far from the Earth GPS measurements would be useful. The ability to track and utilize weak GPS signals transmitted across the limb of the Earth is highly dependent on the configuration and sensitivity of the GPS receiver being used. For this study three GPS configurations were considered: a "standard" GPS receiver with zero dB antenna gain, a "weak signal" GPS receiver with zero dB antenna gain, and a "weak signal" GPS receiver with an Earth-pointing direction antenna (providing 10 dB additional gain). The analysis indicates that with proper selection and configuration of the GPS receiver on the Orion spacecraft, GPS can potentially improve navigation performance during the critical final phases of flight prior to Earth atmospheric entry interface, and may reduce reliance on two-way range tracking from Earth-based ground stations.

  7. Ground track maintenance for BeiDou IGSO satellites subject to tesseral resonances and the luni-solar perturbations

    Science.gov (United States)

    Fan, Li; Jiang, Chao; Hu, Min

    2017-02-01

    Eight inclined geosynchronous satellite orbit (IGSO) satellites in the Chinese BeiDou Navigation Satellite System (BDS) have been put in orbit until now. IGSO is a special class of geosynchronous circular orbit, with the inclination not equal to zero. It can provide high elevation angle coverage to high-latitude areas. The geography longitude of the ground track cross node is the main factor to affect the ground coverage areas of the IGSO satellites. In order to ensure the navigation performance of the IGSO satellites, the maintenance control of the ground track cross node is required. Considering the tesseral resonances and the luni-solar perturbations, a control approach is proposed to maintain the ground track for the long-term evolution. The drifts of the ground track cross node of the IGSO satellites are analyzed, which is formulated as a function of the bias of the orbit elements and time. Based on the derived function, a method by offsetting the semi-major axis is put forward to maintain the longitude of the ground track cross node, and the offset calculation equation is presented as well. Moreover, the orbit inclination is adjusted to maintain the location angle intervals between each two IGSO satellites. Finally, the precision of the offset calculation equation is analyzed to achieve the operational deployment. Simulation results show that the semi-major axis offset method is effective, and its calculation equation is accurate. The proposed approach has been applied to the maintenance control of BeiDou IGSO satellites.

  8. The Plot

    OpenAIRE

    Clark, J. Kent

    1991-01-01

    The following essay on the Popish Plot is chapter nine of my biography of Thomas, 5th Baron, 1st Earl, and 1st Marquess of Wharton; and perhaps it is the only chapter in the history of biography that barely mentions the name of the protagonist. This odd state of affairs arises because neither the political career of Thomas Wharton, who later became de facto prince of the Whigs, nor the English Revolution, which he vigorously supported, can be understood without considerable bac...

  9. Analytical and numerical study of the ground-track resonances of Dawn orbiting Vesta

    CERN Document Server

    Delsate, N

    2012-01-01

    The aim of Dawn mission is the acquisition of data from orbits around two bodies, (4)Vesta and (1)Ceres, the two most massive asteroids. Due to the low thrust propulsion, Dawn will slowly cross and transit through ground-track resonances, where the perturbations on Dawn orbit may be significant. In this context, to safety go the Dawn mission from the approach orbit to the lowest science orbit, it is essential to know the properties of the crossed resonances. This paper analytically investigates the properties of the major ground-track resonances (1:1, 1:2, 2:3 and 3:2) appearing for Vesta orbiters: location of the equilibria, aperture of the resonances and period at the stable equilibria. We develop a general method using an averaged Hamiltonian formulation with a spherical harmonic approximation of the gravity field. If the values of the gravity field coefficient change, our method stays correct and applicable. We also discuss the effect of one uncertainty on the C20 and C22 coefficients on the properties of...

  10. Complexity Plots

    KAUST Repository

    Thiyagalingam, Jeyarajan

    2013-06-01

    In this paper, we present a novel visualization technique for assisting the observation and analysis of algorithmic complexity. In comparison with conventional line graphs, this new technique is not sensitive to the units of measurement, allowing multivariate data series of different physical qualities (e.g., time, space and energy) to be juxtaposed together conveniently and consistently. It supports multivariate visualization as well as uncertainty visualization. It enables users to focus on algorithm categorization by complexity classes, while reducing visual impact caused by constants and algorithmic components that are insignificant to complexity analysis. It provides an effective means for observing the algorithmic complexity of programs with a mixture of algorithms and black-box software through visualization. Through two case studies, we demonstrate the effectiveness of complexity plots in complexity analysis in research, education and application. © 2013 The Author(s) Computer Graphics Forum © 2013 The Eurographics Association and Blackwell Publishing Ltd.

  11. Next-Generation Ground Network Architecture for Communications and Tracking of Interplanetary Smallsats

    Science.gov (United States)

    Cheung, K.-M.; Abraham, D.; Arroyo, B.; Basilio, E.; Babuscia, A.; Duncan, C.; Lee, D.; Oudrhiri, K.; Pham, T.; Staehle, R.; Waldherr, S.; Welz, G.; Wyatt, J.; Lanucara, M.; Malphrus, B.; Bellardo, J.; Puig-Suari, J.; Corpino, S.

    2015-08-01

    As small spacecraft venture out of Earth orbit, they will encounter challenges not experienced or addressed by the numerous low Earth orbit (LEO) CubeSat and smallsat missions staged to date. The LEO CubeSats typically use low-cost, proven CubeSat radios, antennas, and university ground stations with small apertures. As more ambitious yet cost-constrained space mission concepts to the Moon and beyond are being developed, CubeSats and smallsats have the potential to provide a more affordable platform for exploring deep space and performing the associated science. Some of the challenges that have, so far, slowed the proliferation of small interplanetary spacecraft are those of communications and navigation. Unlike Earth-orbiting spacecraft that navigate via government services such as North American Aerospace Defense Command's (NORAD's) tracking elements or the Global Positioning Satellite (GPS) system, interplanetary spacecraft would have to operate in a fundamentally different manner that allows the deep-space communications link to provide both command/telemetry and the radiometric data needed for navigation. Another challenge occurs when smallsat and CubeSat missions would involve multiple spacecraft that require near-simultaneous communication and/or navigation, but have a very limited number of ground antenna assets, as well as available spectrum, to support their links. To address these challenges, the Jet Propulsion Laboratory (JPL) and the Deep Space Network (DSN) it operates for NASA are pursuing the following efforts: (1) Developing a CubeSat-compatible, DSN-compatible transponder -- Iris -- which a commercial vendor can then make available as a product line. (2) Developing CubeSat-compatible high-gain antennas -- deployable reflectors, reflectarrays, and inflatable antennas. (3) Streamlining access and utilization processes for DSN and related services such as the Advanced Multi-Mission Operations System (AMMOS). (4) Developing methodologies for tracking

  12. NPLOT - NASTRAN PLOT

    Science.gov (United States)

    Mcentire, K.

    1994-01-01

    becomes command driven, enabling the user to manipulate the display or execute a command without having to return to the menu. NPLOT is also able to plot deformed shapes allowing it to perform post-processing. The program can read displacements, either static displacements or eigenvectors, from a MSC/NASTRAN F06 file or a UAI/NASTRAN PRT file. The displacements are written into a unformatted scratch file where they are available for rapid access when the user wishes to display a deformed shape. All subcases or mode shapes can be read in at once. Then it is easy to enable the deformed shape, to change subcases or mode shapes and to change the scale factor for subsequent plots. NPLOT is written in VAX FORTRAN for DEC VAX series computers running VMS. As distributed, the NPLOT source code makes calls to the DI3000 graphics package from Precision Visuals; however, a set of interface routines is provided to translate the DI3000 calls into Tektronix PLOT10/TCS graphics library calls so that NPLOT can use the standard Tektronix 4010 which many PC terminal emulation software programs support. NPLOT is available in VAX BACKUP format on a 9-track 1600 BPI DEC VAX BACKUP format magnetic tape (standard media) or a TK50 tape cartridge. This program was developed in 1991. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. Tektronix, PLOT10, and TCS are trademarks of Tektronix, Inc. DI3000 is a registered trademark of Precision Visuals, Inc. NASTRAN is a registered trademark of the National Aeronautics and Space Administration. MSC/ is a trademark of MacNeal-Schwendler Corporation. UAI is a trademark of Universal Analytics, Inc.

  13. Tracking of urban aerosols using combined lidar-based remote sensing and ground-based measurements

    Directory of Open Access Journals (Sweden)

    T.-Y. He

    2011-10-01

    Full Text Available A measuring campaign was performed over the neighboring towns of Nova Gorica in Slovenia and Gorizia in Italy on 24 and 25 May 2010, to investigate the concentration and distribution of urban aerosols. Tracking of two-dimensional spatial and temporal aerosol distributions was performed using scanning elastic lidar operating at 1064 nm. In addition, PM10 concentrations of particles, NOx and meteorological data were continuously monitored within the lidar scanning region. Based on the collected data, we investigated the flow dynamics and the aerosol concentrations within the lower troposphere and an evidence for daily aerosol cycles. We observed a number of cases with spatially localized increased lidar returns, which were found to be due to the presence of point sources of particulate matter. Daily aerosol concentration cycles were also clearly visible with a peak in aerosol concentration during the morning rush hours and daily maximum at around 17:00 Central European Time. We also found that the averaged horizontal atmospheric extinction within the scanning region 200 m above the ground is correlated to the PM10 concentration at the ground level with a correlation coefficient of 0.64, which may be due to relatively quiet meteorological conditions and basin-like terrain configuration.

  14. Multiple hypothesis clustering in radar plot extraction

    NARCIS (Netherlands)

    Huizing, A.G.; Theil, A.; Dorp, Ph. van; Ligthart, L.P.

    1995-01-01

    False plots and plots with inaccurate range and Doppler estimates may severely degrade the performance of tracking algorithms in radar systems. This paper describes how a multiple hypothesis clustering technique can be applied to mitigate the problems involved in plot extraction. The measures of

  15. Multiple hypothesis clustering in radar plot extraction

    NARCIS (Netherlands)

    Huizing, A.G.; Theil, A.; Dorp, Ph. van; Ligthart, L.P.

    1995-01-01

    False plots and plots with inaccurate range and Doppler estimates may severely degrade the performance of tracking algorithms in radar systems. This paper describes how a multiple hypothesis clustering technique can be applied to mitigate the problems involved in plot extraction. The measures of con

  16. Three-Dimensional Dynamic Analyses of Track-Embankment-Ground System Subjected to High Speed Train Loads

    Directory of Open Access Journals (Sweden)

    Qiang Fu

    2014-01-01

    Full Text Available A three-dimensional finite element model was developed to investigate dynamic response of track-embankment-ground system subjected to moving loads caused by high speed trains. The track-embankment-ground systems such as the sleepers, the ballast, the embankment, and the ground are represented by 8-noded solid elements. The infinite elements are used to represent the infinite boundary condition to absorb vibration waves induced by the passing of train load at the boundary. The loads were applied on the rails directly to simulate the real moving loads of trains. The effects of train speed on dynamic response of the system are considered. The effect of material parameters, especially the modulus changes of ballast and embankment, is taken into account to demonstrate the effectiveness of strengthening the ballast, embankment, and ground for mitigating system vibration in detail. The numerical results show that the model is reliable for predicting the amplitude of vibrations produced in the track-embankment-ground system by high-speed trains. Stiffening of fill under the embankment can reduce the vibration level, on the other hand, it can be realized by installing a concrete slab under the embankment. The influence of axle load on the vibration of the system is obviously lower than that of train speed.

  17. Three-Dimensional Dynamic Analyses of Track-Embankment-Ground System Subjected to High Speed Train Loads

    Science.gov (United States)

    2014-01-01

    A three-dimensional finite element model was developed to investigate dynamic response of track-embankment-ground system subjected to moving loads caused by high speed trains. The track-embankment-ground systems such as the sleepers, the ballast, the embankment, and the ground are represented by 8-noded solid elements. The infinite elements are used to represent the infinite boundary condition to absorb vibration waves induced by the passing of train load at the boundary. The loads were applied on the rails directly to simulate the real moving loads of trains. The effects of train speed on dynamic response of the system are considered. The effect of material parameters, especially the modulus changes of ballast and embankment, is taken into account to demonstrate the effectiveness of strengthening the ballast, embankment, and ground for mitigating system vibration in detail. The numerical results show that the model is reliable for predicting the amplitude of vibrations produced in the track-embankment-ground system by high-speed trains. Stiffening of fill under the embankment can reduce the vibration level, on the other hand, it can be realized by installing a concrete slab under the embankment. The influence of axle load on the vibration of the system is obviously lower than that of train speed. PMID:24723838

  18. Reducing Earth Topography Resolution for SMAP Mission Ground Tracks Using K-Means Clustering

    Science.gov (United States)

    Rizvi, Farheen

    2013-01-01

    The K-means clustering algorithm is used to reduce Earth topography resolution for the SMAP mission ground tracks. As SMAP propagates in orbit, knowledge of the radar antenna footprints on Earth is required for the antenna misalignment calibration. Each antenna footprint contains a latitude and longitude location pair on the Earth surface. There are 400 pairs in one data set for the calibration model. It is computationally expensive to calculate corresponding Earth elevation for these data pairs. Thus, the antenna footprint resolution is reduced. Similar topographical data pairs are grouped together with the K-means clustering algorithm. The resolution is reduced to the mean of each topographical cluster called the cluster centroid. The corresponding Earth elevation for each cluster centroid is assigned to the entire group. Results show that 400 data points are reduced to 60 while still maintaining algorithm performance and computational efficiency. In this work, sensitivity analysis is also performed to show a trade-off between algorithm performance versus computational efficiency as the number of cluster centroids and algorithm iterations are increased.

  19. Tracking multi-generational colonization of the breeding grounds by monarch butterflies in eastern North America.

    Science.gov (United States)

    Flockhart, D T Tyler; Wassenaar, Leonard I; Martin, Tara G; Hobson, Keith A; Wunder, Michael B; Norris, D Ryan

    2013-10-07

    Insect migration may involve movements over multiple breeding generations at continental scales, resulting in formidable challenges to their conservation and management. Using distribution models generated from citizen scientist occurrence data and stable-carbon and -hydrogen isotope measurements, we tracked multi-generational colonization of the breeding grounds of monarch butterflies (Danaus plexippus) in eastern North America. We found that monarch breeding occurrence was best modelled with geographical and climatic variables resulting in an annual breeding distribution of greater than 12 million km(2) that encompassed 99% occurrence probability. Combining occurrence models with stable isotope measurements to estimate natal origin, we show that butterflies which overwintered in Mexico came from a wide breeding distribution, including southern portions of the range. There was a clear northward progression of monarchs over successive generations from May until August when reproductive butterflies began to change direction and moved south. Fifth-generation individuals breeding in Texas in the late summer/autumn tended to originate from northern breeding areas rather than regions further south. Although the Midwest was the most productive area during the breeding season, monarchs that re-colonized the Midwest were produced largely in Texas, suggesting that conserving breeding habitat in the Midwest alone is insufficient to ensure long-term persistence of the monarch butterfly population in eastern North America.

  20. A Single Phase Doubly Grounded Semi-Z-Source Inverter for Photovoltaic (PV Systems with Maximum Power Point Tracking (MPPT

    Directory of Open Access Journals (Sweden)

    Tofael Ahmed

    2014-06-01

    Full Text Available In this paper, a single phase doubly grounded semi-Z-source inverter with maximum power point tracking (MPPT is proposed for photovoltaic (PV systems. This proposed system utilizes a single-ended primary inductor (SEPIC converter as DC-DC converter to implement the MPPT algorithm for tracking the maximum power from a PV array and a single phase semi-Z-source inverter for integrating the PV with AC power utilities. The MPPT controller utilizes a fast-converging algorithm to track the maximum power point (MPP and the semi-Z-source inverter utilizes a nonlinear SPWM to produce sinusoidal voltage at the output. The proposed system is able to track the MPP of PV arrays and produce an AC voltage at its output by utilizing only three switches. Experimental results show that the fast-converging MPPT algorithm has fast tracking response with appreciable MPP efficiency. In addition, the inverter shows the minimization of common mode leakage current with its ground sharing feature and reduction of the THD as well as DC current components at the output during DC-AC conversion.

  1. Vision-Based Detection and Tracking of a Mobile Ground Target Using a Fixed-Wing UAV

    Directory of Open Access Journals (Sweden)

    Xun Wang

    2014-09-01

    Full Text Available This paper presents a framework for tracking a mobile ground target (MGT using a fixed-wing unmanned aerial vehicle (UAV. Challenges from pure theories to practical applications, including varying illumination, computational limits and a lack of clarity are considered. The procedure consists of four steps, namely: target detection, target localization, states estimation and UAV guidance. Firstly, the MGT in the wild is separated from the background using a Laplacian operator-based method. Next, the MGT is located by performing coordinate transformations with the assumption that the altitude of the ground is invariant and known. Afterwards, a Kalman filter is used to estimate the location and velocity of the MGT. Finally, a modified guidance law is developed to guide the UAV to circle and track the MGT. The performance of our framework is validated by simulations and a number of actual flight tests. The results indicate that the framework is effective and of low computational complexity, and in particular our modified guidance law can reduce the error of the tracking distance by about 75% in specified situations. With the proposed framework, such challenges caused by the actual system can be tackled effectively, and the fixed-wing UAV can track the MGT stably.

  2. Open-loop GPS signal tracking at low elevation angles from a ground-based observation site

    Science.gov (United States)

    Beyerle, Georg; Zus, Florian

    2017-01-01

    A 1-year data set of ground-based GPS signal observations aiming at geometric elevation angles below +2° is analysed. Within the "GLESER" measurement campaign about 2600 validated setting events were recorded by the "OpenGPS" open-loop tracking receiver at an observation site located at 52.3808° N, 13.0642° E between January and December 2014. The measurements confirm the feasibility of open-loop signal tracking down to geometric elevation angles of -1 to -1.5° extending the corresponding closed-loop tracking range by up to 1°. The study is based on the premise that observations of low-elevation events by a ground-based receiver may serve as test cases for space-based radio occultation measurements, even if the latter proceed at a significantly faster temporal scale. The results support the conclusion that the open-loop Doppler model has negligible influence on the derived carrier frequency profile for strong signal-to-noise density ratios above about 30 dB Hz. At lower signal levels, however, the OpenGPS receiver's dual-channel design, which tracks the same signal using two Doppler models differing by 10 Hz, uncovers a notable bias. The repeat patterns of the GPS orbit traces in terms of azimuth angle reveal characteristic signatures in both signal amplitude and Doppler frequency with respect to the topography close to the observation site. Mean vertical refractivity gradients, extracted from ECMWF meteorological fields, correlate weakly to moderately with observed signal amplitude fluctuations at geometric elevation angles between +1 and +2°. Results from multiple phase screen simulations support the interpretation that these fluctuations are at least partly produced by atmospheric multipath; at negative elevation angles diffraction at the ground surface seems to contribute.

  3. Ground bounce tracking for landmine detection using a sequential Monte Carlo method

    Science.gov (United States)

    Tang, Li; Torrione, Peter A.; Eldeniz, Cihat; Collins, Leslie M.

    2007-04-01

    A Sequential Monte Carlo (SMC) method is proposed to locate the ground bounce (GB) positions in 3D data collected by ground penetrating radar (GPR) system. The algorithm is verified utilizing real data and improved landmine detection performance is achieved compared with three other GB trackers.

  4. Spectrometers for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR): Airborne Concepts and Ground Prototype Measurements

    Science.gov (United States)

    Russell, P. B.; Schmid, B.; Flynn, C.; Dunagan, S. E.; Johnson, R. R.; Redemann, J.; Livingston, J.

    2007-12-01

    A collaboration between NASA Ames Research Center and Battelle Pacific Northwest Division is exploring new instrument concepts that combine sky scanning and spectroscopy with the direct sun transmission measurement capabilities of previous instruments like the NASA Ames Airborne Tracking Sunphotometers (AATS). Additional technical goals are to reduce instrument size, weight, and power requirements while increasing autonomy, so as to permit operation on a wider range of aircraft, including unmanned aerial vehicles (UAVs). The overall science goal for the new instruments is to improve knowledge of atmospheric constituents and their links to climate using a variety of airborne measurement approaches including satellite validation. The sky scanning capability will enable retrievals of aerosol type (via complex refractive index and shape) and aerosol size distribution extending to larger sizes than attainable by direct-beam sunphotometry alone. The spectroscopic capability will improve measurements of gas constituents (e.g., H2O, O3, NO2, SO2) . Concepts explored to date for an airborne Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR-Air) include using fiber optics to link a spectrometer inside the aircraft to optical entrance ports in a relatively small tracking/scanning head outside the aircraft. 4STAR feasibility depends on overcoming three technological hurdles: 1. Maintaining calibration to 1% stability over a period of months. 2. Demonstrating stray light rejection to permit measuring skylight within a few degrees of the sun. 3. Devising a fiber optic coupling that maintains 1% calibration stability with as many as possible of the following desirable characteristics: detachable during assembly before calibration; detachable between calibration and scientific measurements; rotatable during measurements. To investigate ways to overcome these hurdles we have developed a ground-based prototype, 4STAR-Ground. To date 4STAR-Ground has been

  5. Safeguarding Self-Governance: A Grounded Theory of Older Patients’ Pattern of Behavior in Relation to their Relatives in Fast-track Programs

    DEFF Research Database (Denmark)

    Berthelsen, Connie B.; Frederiksen, Kirsten; Lindhardt Damsgaard, Tove

    2014-01-01

    Abstract The aim of this study was to generate a grounded theory of older patients’ pattern of behavior in relation to their relatives’ involvement in fast-track programs during total joint replacement. Sixteen patients were recruited in orthopedic wards. Data collection included 11 interviews......-governance emerged in the analysis as the core category of our theory and pattern of behavior of the older patients in relation to their relatives. The older patients’ main concern was to complete the fast-track program while maintaining autonomy, which they resolved through four strategies of actions: embracing......, shielding, distancing, and masking. Keywords: Fast-track program, grounded theory, older patients, relatives, total joint replacement....

  6. Hardware in the Loop Implementation of Adaptive Vision Based Guidance Law for Ground Target Tracking

    Science.gov (United States)

    2008-12-01

    53 Figure 31. PTU -D300 from Directed Perceptions...54 Figure 32. xPC Driver Model for the PTU -D300 .................................................. 55 Figure 33. Ground... PTU -D300...................................................... 55 Table 2. Summary of S-Functions

  7. Use of a Closed-Loop Tracking Algorithm for Orientation Bias Determination of an S-Band Ground Station

    Science.gov (United States)

    Welch, Bryan W.; Schrage, Dean S.; Piasecki, Marie T.

    2015-01-01

    The Space Communications and Navigation (SCaN) Testbed project completed installation and checkout testing of a new S-Band ground station at the NASA Glenn Research Center in Cleveland, Ohio in 2015. As with all ground stations, a key alignment process must be conducted to obtain offset angles in azimuth (AZ) and elevation (EL). In telescopes with AZ-EL gimbals, this is normally done with a two-star alignment process, where telescope-based pointing vectors are derived from catalogued locations with the AZ-EL bias angles derived from the pointing vector difference. For an antenna, the process is complicated without an optical asset. For the present study, the solution was to utilize the gimbal control algorithms closed-loop tracking capability to acquire the peak received power signal automatically from two distinct NASA Tracking and Data Relay Satellite (TDRS) spacecraft, without a human making the pointing adjustments. Briefly, the TDRS satellite acts as a simulated optical source and the alignment process proceeds exactly the same way as a one-star alignment. The data reduction process, which will be discussed in the paper, results in two bias angles which are retained for future pointing determination. Finally, the paper compares the test results and provides lessons learned from the activity.

  8. Autonomous Aerial Refueling Ground Test Demonstration--A Sensor-in-the-Loop, Non-Tracking Method.

    Science.gov (United States)

    Chen, Chao-I; Koseluk, Robert; Buchanan, Chase; Duerner, Andrew; Jeppesen, Brian; Laux, Hunter

    2015-05-11

    An essential capability for an unmanned aerial vehicle (UAV) to extend its airborne duration without increasing the size of the aircraft is called the autonomous aerial refueling (AAR). This paper proposes a sensor-in-the-loop, non-tracking method for probe-and-drogue style autonomous aerial refueling tasks by combining sensitivity adjustments of a 3D Flash LIDAR camera with computer vision based image-processing techniques. The method overcomes the inherit ambiguity issues when reconstructing 3D information from traditional 2D images by taking advantage of ready to use 3D point cloud data from the camera, followed by well-established computer vision techniques. These techniques include curve fitting algorithms and outlier removal with the random sample consensus (RANSAC) algorithm to reliably estimate the drogue center in 3D space, as well as to establish the relative position between the probe and the drogue. To demonstrate the feasibility of the proposed method on a real system, a ground navigation robot was designed and fabricated. Results presented in the paper show that using images acquired from a 3D Flash LIDAR camera as real time visual feedback, the ground robot is able to track a moving simulated drogue and continuously narrow the gap between the robot and the target autonomously.

  9. Autonomous Aerial Refueling Ground Test Demonstration—A Sensor-in-the-Loop, Non-Tracking Method

    Directory of Open Access Journals (Sweden)

    Chao-I Chen

    2015-05-01

    Full Text Available An essential capability for an unmanned aerial vehicle (UAV to extend its airborne duration without increasing the size of the aircraft is called the autonomous aerial refueling (AAR. This paper proposes a sensor-in-the-loop, non-tracking method for probe-and-drogue style autonomous aerial refueling tasks by combining sensitivity adjustments of a 3D Flash LIDAR camera with computer vision based image-processing techniques. The method overcomes the inherit ambiguity issues when reconstructing 3D information from traditional 2D images by taking advantage of ready to use 3D point cloud data from the camera, followed by well-established computer vision techniques. These techniques include curve fitting algorithms and outlier removal with the random sample consensus (RANSAC algorithm to reliably estimate the drogue center in 3D space, as well as to establish the relative position between the probe and the drogue. To demonstrate the feasibility of the proposed method on a real system, a ground navigation robot was designed and fabricated. Results presented in the paper show that using images acquired from a 3D Flash LIDAR camera as real time visual feedback, the ground robot is able to track a moving simulated drogue and continuously narrow the gap between the robot and the target autonomously.

  10. Development of a vision-based ground target detection and tracking system for a small unmanned helicopter

    Institute of Scientific and Technical Information of China (English)

    LIN Feng; LUM Kai-Yew; CHEN Ben M.; LEE Tong H

    2009-01-01

    It is undoubted that the latest trend in the unmanned aerial vehicles (UAVs) community is towards visionbased unmanned small-scale helicopter,utilizing the maneuvering capabilities of the helicopter and the rich information of visual sensors,in order to arrive at a versatile platform for a variety of applications such as navigation,surveillance,tracking,etc.In this paper,we present the development of a visionbased ground target detection and tracking system for a small UAV helicopter.More specifically,we propose a real-time vision algorithm,based on moment invariants and two-stage pattern recognition,to achieve automatic ground target detection.In the proposed algorithm,the key geometry features of the target are extracted to detect and identify the target.Simultaneously,a Kalman filter is used to estimate and predict the position of the target,referred to as dynamic features,based on its motion model.These dynamic features are then combined with geometry features to identify the target in the second-stage of pattern recognition,when geometry features of the target change significantly due to noise and disturbance in the environment.Once the target is identified,an automatic control scheme is utilized to control the pan/tilt visual mechanism mounted on the helicopter such that the identified target is to be tracked at the center of the captured images.Experimental results based on images captured by the small-scale unmanned helicopter,SheLion,in actual flight tests demonstrate the effectiveness and robustness of the overall system.

  11. Optimal UAV Path Planning for Tracking a Moving Ground Vehicle with a Gimbaled Camera

    Science.gov (United States)

    2014-03-27

    105 vii List of Figures Figure Page 2.1. Sig Rascal 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.2. Arduino ...necessary baseline for flight testing autonomous UAV convoy tracking. Figure 2.2: Arduino Autopilot - APM 2.5 [1] The APM is an open source autopilot...a C-based programming language and comes with a cor- 21 responding programming environment called Arduino IDE [1]. Within the Arduino IDE, all of the

  12. Maintaining Unity - Relatives in older patient's fast-track treatment programmes. A Grounded theory study

    DEFF Research Database (Denmark)

    Berthelsen, Connie Bøttcher; Lindhardt, Tove; Frederiksen, Kirsten

    2014-01-01

    over 70 years of age participated. The constant comparative method was the guiding principle for simultaneous data collection, data analysis and coding, while theoretically sampling and writing memos. FINDINGS: Maintaining Unity emerged as the relatives' pattern of behaviour through which they resolved...... to fit in with the patients' and health professionals' requirements. CONCLUSION: The substantive theory of Maintaining Unity offers knowledge of relatives' strong desire to provide compassionate and loving support for the older patients during fast-track treatment programmes....

  13. Density Distribution Sunflower Plots

    OpenAIRE

    Dupont, William D; W. Dale Plummer Jr.

    2003-01-01

    Density distribution sunflower plots are used to display high-density bivariate data. They are useful for data where a conventional scatter plot is difficult to read due to overstriking of the plot symbol. The x-y plane is subdivided into a lattice of regular hexagonal bins of width w specified by the user. The user also specifies the values of l, d, and k that affect the plot as follows. Individual observations are plotted when there are less than l observations per bin as in a conventio...

  14. GlobPlot

    DEFF Research Database (Denmark)

    Linding, Rune; Russell, Robert B; Neduva, Victor

    2003-01-01

    are important for protein function. We present here a new tool for discovery of such unstructured, or disordered regions within proteins. GlobPlot (http://globplot.embl.de) is a web service that allows the user to plot the tendency within the query protein for order/globularity and disorder. We show examples...... with known proteins where it successfully identifies inter-domain segments containing linear motifs, and also apparently ordered regions that do not contain any recognised domain. GlobPlot may be useful in domain hunting efforts. The plots indicate that instances of known domains may often contain additional...... N- or C-terminal segments that appear ordered. Thus GlobPlot may be of use in the design of constructs corresponding to globular proteins, as needed for many biochemical studies, particularly structural biology. GlobPlot has a pipeline interface--GlobPipe--for the advanced user to do whole proteome...

  15. Difference and ratio plots

    DEFF Research Database (Denmark)

    Svendsen, Anders Jørgen; Holmskov, U; Bro, Peter

    1995-01-01

    hitherto unnoted differences between controls and patients with either rheumatoid arthritis or systemic lupus erythematosus. For this we use simple, but unconventional, graphic representations of the data, based on difference plots and ratio plots. Differences between patients with Burkitt's lymphoma...... and systemic lupus erythematosus from another previously published study (Macanovic, M. and Lachmann, P.J. (1979) Clin. Exp. Immunol. 38, 274) are also represented using ratio plots. Our observations indicate that analysis by regression analysis may often be misleading....

  16. Fuzzy recurrence plots

    Science.gov (United States)

    Pham, T. D.

    2016-12-01

    Recurrence plots display binary texture of time series from dynamical systems with single dots and line structures. Using fuzzy recurrence plots, recurrences of the phase-space states can be visualized as grayscale texture, which is more informative for pattern analysis. The proposed method replaces the crucial similarity threshold required by symmetrical recurrence plots with the number of cluster centers, where the estimate of the latter parameter is less critical than the estimate of the former.

  17. Open-loop GPS signal tracking at low elevation angles from a ground-based observation site

    Science.gov (United States)

    Beyerle, Georg; Zus, Florian

    2016-04-01

    For more than a decade space-based global navigation satellite system (GNSS) radio occultation (RO) observations are used by meteorological services world-wide for their numerical weather prediction models. In addition, climate studies increasingly rely on validated GNSS-RO data sets of atmospheric parameters. GNSS-RO profiles typically cover an altitude range from the boundary layer up to the upper stratosphere; their highest accuracy and precision, however, are attained at the tropopause level. In the lower troposphere, multipath ray propagation tend to induce signal amplitude and frequency fluctuations which lead to the development and implementation of open-loop signal tracking methods in GNSS-RO receiver firmwares. In open-loop mode the feed-back values for the carrier tracking loop are derived not from measured data, but from a Doppler frequency model which usually is extracted from an atmospheric climatology. In order to ensure that this receiver-internal parameter set, does not bias the carrier phase path observables, dual-channel open-loop GNSS-RO signal tracking was suggested. Following this proposal the ground-based "GLESER" (GPS low-elevation setting event recorder) campaign was established. Its objective was to disproof the existence of model-induced frequency biases using ground-based GPS observations at very low elevation angles. Between January and December 2014 about 2600 validated setting events, starting at geometric elevation angles of +2° and extending to -1°… - 1.5°, were recorded by the single frequency "OpenGPS" GPS receiver at a measurement site located close to Potsdam, Germany (52.3808°N, 13.0642°E). The study is based on the assumption that these ground-based observations may be used as proxies for space-based RO measurements, even if the latter occur on a one order of magnitude faster temporal scale. The "GLESER" data analysis shows that the open-loop Doppler model has negligible influence on the derived frequency profile

  18. Detection of Solid Tides on Europa Through Ground-Tracking of a Low-Altitude, Altimeter- Equipped Orbiter

    Science.gov (United States)

    Casotto, S.; Padovan, S.; Bardella, M.

    2007-12-01

    The possibility of detecting a global liquid ocean beneath the icy crust of Europa without the use of landers or ice penetrators rests on the measurement of the Love numbers h2 and k2. These are respectively related to the radial deformation of the surface and the consequent tidally-induced variation of the gravitational field of this icy satellite. Depending on the rigidity of the icy crust, the response of the Europan surface to the tidal forces gives an indication of the depth of a possible subsurface ocean. Previous studies in this area have addressed the detection of tidal surface deformations through the analysis of the tidally induced orbital perturbations of a Europan orbiter. As a preliminary study in preparation for future missions to Europa, as in the LAPLACE proposal to the European Space Agency, the approach followed here is to introduce the presence of an onboard altimeter. In this study we then generate synthetic measurements taken from an altimeter-equipped, low-altitude orbiter, supplemented with Earth-based tracking of the orbiter. For simplicity, ground-tracking is simulated as a range data-type. Altimeter measurements are simulated using parameters based on available models for the interior of Europa derived from Galileo mission data. Reference orbits were obtained by numerical investigations of the dynamically unstable near-Europa environment. Orbits were found to be stable over periods of approximately one to three months at altitudes of 100 km and inclinations varying from 75 degrees to 105 degrees. The measurements are consequently simulated over a period of one to two months. Under the hypothesis that Europan gravity field information of sufficient accuracy has been obtained in the first phase of the mission, the simulations address the detection of the solid tide related Love parameters h2 and k2. Results of this sensitivity study will be presented for a variety of orbital configurations with the aim to help in the design of future Europa

  19. Distributed plot-making

    DEFF Research Database (Denmark)

    Jensen, Lotte Groth; Bossen, Claus

    2016-01-01

    different socio-technical systems (paper-based and electronic patient records). Drawing on the theory of distributed cognition and narrative theory, primarily inspired by the work done within health care by Cheryl Mattingly, we propose that the creation of overview may be conceptualised as ‘distributed plot......-making’. Distributed cognition focuses on the role of artefacts, humans and their interaction in information processing, while narrative theory focuses on how humans create narratives through the plot construction. Hence, the concept of distributed plot-making highlights the distribution of information processing...... between different social actors and artefacts, as well as the filtering, sorting and ordering of such information into a narrative that is made coherent by a plot. The analysis shows that the characteristics of paper-based and electronic patient records support or obstruct the creation of overview in both...

  20. Multiple plots in R

    DEFF Research Database (Denmark)

    Edwards, Stefan McKinnon

    2012-01-01

    In this chapter I will investigate how to combine multiple plots into a single. The scenario is a dataset of a series of measurements, on three samples in three situations. There are many ways we can display this, e.g. 3d graphs or faceting. 3d graphs are not good for displaying static data so we...... will not go there. Faceting is strictly speaking for plotting all variable / classes against each other....

  1. Multiple plots in R

    DEFF Research Database (Denmark)

    Edwards, Stefan McKinnon

    2012-01-01

    In this chapter I will investigate how to combine multiple plots into a single. The scenario is a dataset of a series of measurements, on three samples in three situations. There are many ways we can display this, e.g. 3d graphs or faceting. 3d graphs are not good for displaying static data so we...... will not go there. Faceting is strictly speaking for plotting all variable / classes against each other....

  2. Seasonal variations of leaf and canopy properties tracked by ground-based NDVI imagery in a temperate forest.

    Science.gov (United States)

    Yang, Hualei; Yang, Xi; Heskel, Mary; Sun, Shucun; Tang, Jianwu

    2017-04-28

    Changes in plant phenology affect the carbon flux of terrestrial forest ecosystems due to the link between the growing season length and vegetation productivity. Digital camera imagery, which can be acquired frequently, has been used to monitor seasonal and annual changes in forest canopy phenology and track critical phenological events. However, quantitative assessment of the structural and biochemical controls of the phenological patterns in camera images has rarely been done. In this study, we used an NDVI (Normalized Difference Vegetation Index) camera to monitor daily variations of vegetation reflectance at visible and near-infrared (NIR) bands with high spatial and temporal resolutions, and found that the infrared camera based NDVI (camera-NDVI) agreed well with the leaf expansion process that was measured by independent manual observations at Harvard Forest, Massachusetts, USA. We also measured the seasonality of canopy structural (leaf area index, LAI) and biochemical properties (leaf chlorophyll and nitrogen content). We found significant linear relationships between camera-NDVI and leaf chlorophyll concentration, and between camera-NDVI and leaf nitrogen content, though weaker relationships between camera-NDVI and LAI. Therefore, we recommend ground-based camera-NDVI as a powerful tool for long-term, near surface observations to monitor canopy development and to estimate leaf chlorophyll, nitrogen status, and LAI.

  3. 1:1 Ground-track resonance in a uniformly rotating 4th degree and order gravitational field

    Science.gov (United States)

    Feng, Jinglang; Noomen, Ron; Hou, Xiyun; Visser, Pieter; Yuan, Jianping

    2017-01-01

    Using a gravitational field truncated at the 4th degree and order, the 1:1 ground-track resonance is studied. To address the main properties of this resonance, a 1-degree of freedom (1-DOF) system is firstly studied. Equilibrium points (EPs), stability and resonance width are obtained. Different from previous studies, the inclusion of non-spherical terms higher than degree and order 2 introduces new phenomena. For a further study about this resonance, a 2-DOF model which includes a main resonance term (the 1-DOF system) and a perturbing resonance term is studied. With the aid of Poincaré sections, the generation of chaos in the phase space is studied in detail by addressing the overlap process of these two resonances with arbitrary combinations of eccentricity ( e) and inclination ( i). Retrograde orbits, near circular orbits and near polar orbits are found to have better stability against the perturbation of the second resonance. The situations of complete chaos are estimated in the e-i plane. By applying the maximum Lyapunov Characteristic Exponent (LCE), chaos is characterized quantitatively and similar conclusions can be achieved. This study is applied to three asteroids 1996 HW1, Vesta and Betulia, but the conclusions are not restricted to them.

  4. Density Distribution Sunflower Plots

    Directory of Open Access Journals (Sweden)

    William D. Dupont

    2003-01-01

    Full Text Available Density distribution sunflower plots are used to display high-density bivariate data. They are useful for data where a conventional scatter plot is difficult to read due to overstriking of the plot symbol. The x-y plane is subdivided into a lattice of regular hexagonal bins of width w specified by the user. The user also specifies the values of l, d, and k that affect the plot as follows. Individual observations are plotted when there are less than l observations per bin as in a conventional scatter plot. Each bin with from l to d observations contains a light sunflower. Other bins contain a dark sunflower. In a light sunflower each petal represents one observation. In a dark sunflower, each petal represents k observations. (A dark sunflower with p petals represents between /2-pk k and /2+pk k observations. The user can control the sizes and colors of the sunflowers. By selecting appropriate colors and sizes for the light and dark sunflowers, plots can be obtained that give both the overall sense of the data density distribution as well as the number of data points in any given region. The use of this graphic is illustrated with data from the Framingham Heart Study. A documented Stata program, called sunflower, is available to draw these graphs. It can be downloaded from the Statistical Software Components archive at http://ideas.repec.org/c/boc/bocode/s430201.html . (Journal of Statistical Software 2003; 8 (3: 1-5. Posted at http://www.jstatsoft.org/index.php?vol=8 .

  5. Orbital Plots Using Gnuplot

    Science.gov (United States)

    Moore, Brian G.

    2000-06-01

    The plotting program Gnuplot is freely available, general purpose, easy to use, and available on a variety of platforms. Complex three-dimensional surfaces, including the familiar angular parts of the hydrogen atom orbitals, are easily represented using Gnuplot. Contour plots allow viewing the radial and angular variation of the probability density in an orbital. Examples are given of how Gnuplot is used in an undergraduate physical chemistry class to view familiar atomic orbitals in new ways or to generate views of orbital functions that the student may have not seen before. Gnuplot may also be easily integrated into the environment of a Web page; an example of this is discussed (and is available at http://onsager.bd.psu.edu/~moore/orbitals_gnuplot). The plotting commands are entered with a form and a CGI script is used to run Gnuplot and display the result back to the browser.

  6. Spatial recurrence plots.

    Science.gov (United States)

    Vasconcelos, D B; Lopes, S R; Viana, R L; Kurths, J

    2006-05-01

    We propose an extension of the recurrence plot concept to perform quantitative analyzes of roughness and disorder of spatial patterns at a fixed time. We introduce spatial recurrence plots (SRPs) as a graphical representation of the pointwise correlation matrix, in terms of a two-dimensional spatial return plot. This technique is applied to the study of complex patterns generated by coupled map lattices, which are characterized by measures of complexity based on SRPs. We show that the complexity measures we propose for SRPs provide a systematic way of investigating the distribution of spatially coherent structures, such as synchronization domains, in lattice profiles. This approach has potential for many more applications, e.g., in surface roughness analyzes.

  7. Inhibiting Interference - a grounded theory of health professionals' pattern of behaviour related to the relatives of older patients in fast-track treatment programmes

    DEFF Research Database (Denmark)

    Berthelsen, Connie Bøttcher; Lindhardt, Tove; Frederiksen, Kirsten

    2014-01-01

    AIM: To generate a grounded theory explaining health professionals' pattern of behaviour and experience related to the relatives of older patients in fast-track treatment programmes during total joint replacement. BACKGROUND: Health professionals uphold standardised care for patients, and effect...... on quality is seen when relatives support patients during total joint replacement. Since health professionals often have problematic relationships with relatives, knowledge is needed of the health professionals' pattern of behaviour in relation to relatives of older patients in fast-track treatment programme....... DESIGN: Grounded theory according to Glaser's methodology was used to generate substantive theory of health professionals' pattern of behaviour. METHODS: Data were collected from 2010 to 2011 by 44 health professionals in orthopaedic wards at two Danish hospitals. Data from nonparticipant observations...

  8. Plot til lyst

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    Den velfungerende krimi faciliterer denne dobbelte plotlæsning ved at muliggøre en særlig form for legende og udforskende interaktion mellem læser og plot: Ved at lægge spor ud og holde tolkningsmuligheder og løsningsmuligheder åbne får vi mulighed for at påtage os og udføre opklaringsarbejdet side......, der inviterer os med ind i selve handlingens rum og forløb og giver os forskellige handlingsmuligheder i forhold til disse. I bogen omtales denne særlige form for plot for forlystelsesplot med henvisning til forlystelsesparken og den særlige form for interaktiv fortælleform, som vi finder der: en...

  9. corner: Corner plots

    Science.gov (United States)

    Foreman-Mackey, Daniel

    2017-02-01

    corner uses matplotlib to visualize multidimensional samples using a scatterplot matrix. In these visualizations, each one- and two-dimensional projection of the sample is plotted to reveal covariances. corner was originally conceived to display the results of Markov Chain Monte Carlo simulations and the defaults are chosen with this application in mind but it can be used for displaying many qualitatively different samples. An earlier version of corner was known as triangle.py.

  10. The Half-Half Plot

    NARCIS (Netherlands)

    Einmahl, J.H.J.; Gantner, M.

    2009-01-01

    The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatter plot. The plot displays jumps clearly and reveals further featu

  11. The Half-Half Plot

    NARCIS (Netherlands)

    Einmahl, J.H.J.; Gantner, M.

    2009-01-01

    The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatter plot. The plot displays jumps clearly and reveals further

  12. The Half-Half Plot

    NARCIS (Netherlands)

    Einmahl, J.H.J.; Gantner, M.

    2009-01-01

    The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatter plot. The plot displays jumps clearly and reveals further featu

  13. The Seismic Response of High-Speed Railway Bridges Subjected to Near-Fault Forward Directivity Ground Motions Using a Vehicle-Track-Bridge Element

    Directory of Open Access Journals (Sweden)

    Chen Ling-kun

    2014-01-01

    Full Text Available Based on the Next Generation Attenuation (NGA project ground motion library, the finite element model of the high-speed railway vehicle-bridge system is established. The model was specifically developed for such system that is subjected to near-fault ground motions. In addition, it accounted for the influence of the rail irregularities. The vehicle-track-bridge (VTB element is presented to simulate the interaction between train and bridge, in which a train can be modeled as a series of sprung masses concentrated at the axle positions. For the short period railway bridge, the results from the case study demonstrate that directivity pulse effect tends to increase the seismic responses of the bridge compared with far-fault ground motions or nonpulse-like motions and the directivity pulse effect and high values of the vertical acceleration component can notably influence the hysteretic behaviour of piers.

  14. Plotting Inequalities, Building Resistance

    Science.gov (United States)

    Renner, Adam; Brew, Bridget; Proctor, Crystal

    2012-01-01

    Media depictions of San Francisco show idyllic images of fog pouring under the Golden Gate Bridge or happy tourists riding cable cars, but rarely the mostly nonwhite neighborhoods of the east side. San Francisco public schools have a bad track record of mimicking this masquerade, with very low numbers of African American and Latina/o students…

  15. matplotlib plotting cookbook

    CERN Document Server

    Devert, Alexandre

    2014-01-01

    This book follows a cookbook style approach that puts orthogonal and non-redundant recipes in your hands. Rather than rehashing the user manual, the explanations expose the underlying logic behind Matplotlib. If you are an engineer or scientist who wants to create great visualizations with Python, rather than yet another specialized language, this is the book for you. While there are several very competent plotting packages, Matplotlib is ""just"" a Python module. Thus, if you know some Python already, you will feel at home from the first steps on. In case you are an application writer, you wo

  16. Plotting Gothic: A Paradox

    Directory of Open Access Journals (Sweden)

    Stephen Murray

    2014-06-01

    Full Text Available The paradox of the title is that while most historians of medieval architecture agree that a combination of geometric and arithmetic methods was generally used to lay out a medieval church, there has been little consensus on the specifics of the process in relation to the design of any particular edifice. I begin by identifying four premises which underlie the debate. I then ask whether the new technologies — laser scanning and computer assisted design/drafting applications — can help. A case study uses newly generated point cloud data from a laser scan of the choir of Beauvais Cathedral. Finally, the notion of ‘plotting’ introduces essential sociological, anthropological and rhetorical dimensions. In the spirit of Roland Barthes ('Le plaisir du texte' and Peter Brooks ('Reading for the Plot', we can understand the urgency with which the architectural historian may seek to unscramble the hidden codes of the building as compulsive ‘reading for the plot’.

  17. A fast Fourier transform (FFT)-based along track interferometry (ATI) approach to SAR-based ground moving target indication (GMTI)

    Science.gov (United States)

    Thomas, Daniel D.; Zhang, Yuhong

    2014-06-01

    Along-track interferometry (ATI) is used to detect ground moving targets against a stationary background in synthetic aperture radar (SAR) imagery. In this paper, we present a novel approach to multi-channel ATI wherein clutter cancellation is applied to each pixel of the multiple SAR images, followed by a Fourier transform to estimate range rate (Doppler). Range rate estimates allow us to compensate for the cross-range offset of the target, thus geo-locating the targets. We then present a number of benefits to this approach.

  18. Average capacity of the ground to train communication link of a curved track in the turbulence of gamma-gamma distribution

    Science.gov (United States)

    Yang, Yanqiu; Yu, Lin; Zhang, Yixin

    2017-04-01

    A model of the average capacity of optical wireless communication link with pointing errors for the ground-to-train of the curved track is established based on the non-Kolmogorov. By adopting the gamma-gamma distribution model, we derive the average capacity expression for this channel. The numerical analysis reveals that heavier fog reduces the average capacity of link. The strength of atmospheric turbulence, the variance of pointing errors, and the covered track length need to be reduced for the larger average capacity of link. The normalized beamwidth and the average signal-to-noise ratio (SNR) of the turbulence-free link need to be increased. We can increase the transmit aperture to expand the beamwidth and enhance the signal intensity, thereby decreasing the impact of the beam wander accordingly. As the system adopting the automatic tracking of beam at the receiver positioned on the roof of the train, for eliminating the pointing errors caused by beam wander and train vibration, the equivalent average capacity of the channel will achieve a maximum value. The impact of the non-Kolmogorov spectral index's variation on the average capacity of link can be ignored.

  19. Aristotle's theory of tragedy plot and comparison with modern plot

    Institute of Scientific and Technical Information of China (English)

    宋莹

    2008-01-01

    This paper is to study Aristotle's theory of tragedy and his tragedy plot from the Poetics. He says,'tragedy is an imitation of an action that is serious,complete,and of adequate magnitude-in language embellished in different ways in different parts-in the form of action,not of narration-through pity and fear effecting the purgation of these emotions. The elements of tragedy are plot,character,thought,diction,melody and spectacle in their order of importance.' However there exist some differences and similarities between his plot in Poetics and modern plot.

  20. GnuForPlot Graphics

    Energy Technology Data Exchange (ETDEWEB)

    2015-11-04

    Gnuforplot Graphics is a Fortran90 program designed to generate two and three dimensional plots of data on a personal computer. The program uses calls to the open source code Gnuplot to generate the plots. Two Fortran90 programs have been written to use the Gnuplot graphics capabilities. The first program, named Plotsetup.f90 reads data from output files created by either the Stadium or LeachXS/Orchestra modeling codes and saves the data in arrays for plotting. This program then calls Gnuforplot which takes the data array along with user specified parameters to set plot specifications and issues Gnuplot commands that generate the screen plots. The user can view the plots and optionally save copies in jpeg format.

  1. Study on Surface Plotting Methods in Parts Plotting

    Institute of Scientific and Technical Information of China (English)

    LIU Zhen; ZHAO Fa-dong

    2013-01-01

    According to the factors that confirm the shape of surface, it is classified into two categories:arc surface and curve surface. The method to confirm the category of surfaces and the plotting methods are discussed in this paper, which provide guidance for parts plotting.

  2. Box-and-Whisker Plots.

    Science.gov (United States)

    Larsen, Russell D.

    1985-01-01

    Box-and-whisker plots (which give rapid visualization of batches of data) can be effectively used to present diverse collections of data used in traditional first-year chemistry courses. Construction of box-and-whisker plots and their use with bond energy data and data on heats of formation and solution are discussed. (JN)

  3. S2PLOT: Three-dimensional (3D) Plotting Library

    Science.gov (United States)

    Barnes, D. G.; Fluke, C. J.; Bourke, P. D.; Parry, O. T.

    2011-03-01

    We present a new, three-dimensional (3D) plotting library with advanced features, and support for standard and enhanced display devices. The library - S2PLOT - is written in C and can be used by C, C++ and FORTRAN programs on GNU/Linux and Apple/OSX systems. S2PLOT draws objects in a 3D (x,y,z) Cartesian space and the user interactively controls how this space is rendered at run time. With a PGPLOT inspired interface, S2PLOT provides astronomers with elegant techniques for displaying and exploring 3D data sets directly from their program code, and the potential to use stereoscopic and dome display devices. The S2PLOT architecture supports dynamic geometry and can be used to plot time-evolving data sets, such as might be produced by simulation codes. In this paper, we introduce S2PLOT to the astronomical community, describe its potential applications, and present some example uses of the library.

  4. Ground and space based cloud-top wind velocities using CFHT/ESPaDOnS (Doppler velocimetry) and VEx/VIRTIS (cloud tracking) coordinated measurements

    Science.gov (United States)

    Machado, Pedro; Widemann, Thomas; Peralta, Javier; Gonçalves, Rúben; Donati, Jean-François; Luz, David

    2016-04-01

    We will present wind velocity results based in the measurements of the horizontal wind field at the cloud top level of the atmosphere of Venus, near 70 km altitude. Our aim is contribute to the characterisation of the zonal and meridional wind latitudinal profiles on hour and day-timescales. This will be done by tracking Doppler shift of solar and CO2 lines over the dayside hemisphere in coordination with ESA's Venus Express orbiter. Our observations measured winds at cloud tops at latitudes 60°S-60°N, while Vex/VIRTIS privileged southern latitudes poleward of 45°S. This coordination effort intended to provide a combined monitoring of short-term changes of wind amplitude and directions with extensive spatial coverage. We present results based on inter comparison of ground-based Doppler velocimetry of cloud-top winds and cloud tracking measurements from the Venus Express spacecraft. Doppler wind velocimetry obtained with the 3.60 m Canada-France-Hawaii telescope (CFHT) and the Visible Spectrograph ESPaDOnS in April 2014 consisted of high-resolution spectra of Fraunhofer lines in the visible range (0.37-1.05 μm) to measure the wind velocity using the Doppler shift of solar radiation scattered by cloud top particles in the observer's direction. The complete optical spectrum was collected at a phase angle Φ = (76 ± 0.3)°, at a resolution of about 80000. Both ground-based and Venus Express measurements show considerable day-to-day variability revealing wave propagation and angular momentum transport in latitude which needs to be carefully assessed. ESPaDOnS and the sequential technique of visible Doppler velocimetry has proven a reference technique to measure instantaneous winds. These measurements are necessary to help validating Global Circulation Models (GCMs), to extend the temporal coverage of available datasets. The ground-based observations in the base of this project are critical in their complementarity with Venus Express, which was recently

  5. PLOT3D user's manual

    Science.gov (United States)

    Walatka, Pamela P.; Buning, Pieter G.; Pierce, Larry; Elson, Patricia A.

    1990-01-01

    PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Seventy-four functions are available. Versions are available for many systems. PLOT3D can handle multiple grids with a million or more grid points, and can produce varieties of model renderings, such as wireframe or flat shaded. Output from PLOT3D can be used in animation programs. The first part of this manual is a tutorial that takes the reader, keystroke by keystroke, through a PLOT3D session. The second part of the manual contains reference chapters, including the helpfile, data file formats, advice on changing PLOT3D, and sample command files.

  6. Trellis plots as visual aids for analyzing split plot experiments

    DEFF Research Database (Denmark)

    Kulahci, Murat; Menon, Anil

    2017-01-01

    The analysis of split plot experiments can be challenging due to a complicated error structure resulting from restrictions on complete randomization. Similarly, standard visualization methods do not provide the insight practitioners desire to understand the data, think of explanations, generate...... hypotheses, build models, or decide on next steps. This article demonstrates the effective use of trellis plots in the preliminary data analysis for split plot experiments to address this problem. Trellis displays help to visualize multivariate data by allowing for conditioning in a general way. They can...

  7. Action Between Plot and Discourse

    DEFF Research Database (Denmark)

    Grünbaum, Thor

    2007-01-01

    , these narrated actions disrupt the theoretical divisions, on the one hand, between the narrated story and the narrating discourse, and on the other hand, between plot-narratology and discourse-narratology. As narrated actions, they seem to belong to the domain of plot-narratology, but insofar as they serve...... an important visualizing function, these narrated actions have a communicative function and, as such, they can be said to belong to the domain of discourse-narratology. In the first part of the article, I argue that a certain type of plot-narratology, due to its retrospective epistemology and abstract...

  8. Action Between Plot and Discourse

    DEFF Research Database (Denmark)

    Grünbaum, Thor

    2007-01-01

    , these narrated actions disrupt the theoretical divisions, on the one hand, between the narrated story and the narrating discourse, and on the other hand, between plot-narratology and discourse-narratology. As narrated actions, they seem to belong to the domain of plot-narratology, but insofar as they serve...... an important visualizing function, these narrated actions have a communicative function and, as such, they can be said to belong to the domain of discourse-narratology. In the first part of the article, I argue that a certain type of plot-narratology, due to its retrospective epistemology and abstract...

  9. Pegadas de mamíferos em parcelas de areia em fragmentos de vegetação da bacia do ribeirão Anhumas, Campinas, São Paulo. Mammal tracks in sand plots in vegetation fragments of the Anhumas creek basin, Campinas, São Paulo.

    Directory of Open Access Journals (Sweden)

    Maria Carolina Brunini SIVIERO;

    2011-06-01

    Full Text Available A urbanização agrava a perda e a fragmentação do habitat e representa uma ameaça à diversidade biológica. As espécies de mamíferos e sua abundância foram determinadas em três fragmentos de mata da bacia do ribeirão Anhumas: riacho da UNICAMP, Mata Santa Genebra e Parque Ecológico Hermógenes F. Leitão Filho, em Campinas, SP. Foram montadas dez parcelas de areia para registrar pegadas de mamíferos distanciadas 250 metros entre si nos dois primeiros locais e sete parcelas no Parque, limitadas pelo perímetro de um açude. De agosto de 2005 a agosto de 2006 foram realizadas quatro amostragens trimestrais de pegadas em cada local, iscando e examinando as parcelas por quatro dias. Foram registradas 15 espécies. O cachorro-do-mato (Cerdocyon thous, o cachorro-doméstico (Canis familiaris, o pequeno felídeo, o tatu (Dasypus novemcinctus e o gambá (Didelphis albiventris foram os mais abundantes. As cercas/alambrados ao redor dos fragmentos não impediram a entrada dos animais domésticos. A abundância do cachorro-doméstico e do gambá evidencia os efeitos prejudiciais da fragmentação e da urbanização na conservação da fauna em ambiente urbano.Urbanization increases the loss and fragmentation of habitat and represents a threat to biological diversity. Mammal species and their abundance were determined in three forest fragments of the Anhumas river basin: UNICAMP, Mata Santa Genebra Forest Reserve and Hermógenes F. Leitão Filho Ecological Park, Campinas, SP. Ten sand plots to register mammal tracks were constructed 250 meters apart in the first two places and seven and seven plots in the park, bounded by the perimeter of a pond. From August 2005 to August 2006 we conducted four quarterly track samplings in each location by baiting and examining the sand plots over four days. Fifteen mammal species were recorded. The crabeating fox (Cerdocyon thous, domestic dog (Canis familiaris, small felid, nine-bandedarmadillo (Dasypus

  10. Normal probability plots with confidence.

    Science.gov (United States)

    Chantarangsi, Wanpen; Liu, Wei; Bretz, Frank; Kiatsupaibul, Seksan; Hayter, Anthony J; Wan, Fang

    2015-01-01

    Normal probability plots are widely used as a statistical tool for assessing whether an observed simple random sample is drawn from a normally distributed population. The users, however, have to judge subjectively, if no objective rule is provided, whether the plotted points fall close to a straight line. In this paper, we focus on how a normal probability plot can be augmented by intervals for all the points so that, if the population distribution is normal, then all the points should fall into the corresponding intervals simultaneously with probability 1-α. These simultaneous 1-α probability intervals provide therefore an objective mean to judge whether the plotted points fall close to the straight line: the plotted points fall close to the straight line if and only if all the points fall into the corresponding intervals. The powers of several normal probability plot based (graphical) tests and the most popular nongraphical Anderson-Darling and Shapiro-Wilk tests are compared by simulation. Based on this comparison, recommendations are given in Section 3 on which graphical tests should be used in what circumstances. An example is provided to illustrate the methods.

  11. Reconstruction of the muon production depth with ground array data based on the TTC (Time-Track Complementarity approach

    Directory of Open Access Journals (Sweden)

    Valore L.

    2013-06-01

    Full Text Available The muon longitudinal profile along the shower axis depends on the nature of the primary particle and primary hadronic interaction with air nuclei. The measurement of muonic component inside showers generated by Very High Energy Cosmic Rays provides a very powerful tool for sensing high energy interactions between cosmic ray particles and air molecules. Fundamental parameters such as the interaction cross section, inelasticity, hadron production and multiplicity can be measured by comparing the development of shower electromagnetic component with that of muonic component. Since 1992 a method has been developed to combine the muon arrival direction in a ground based array for cosmic ray detection with their arrival delay with respect to the shower core. This combination permits to select high energy muons weakly scattered in the atmosphere and to reconstruct their height of production with good accuracy. In this paper we discuss the possibility to realize a “dual” apparatus able to detect both electromagnetic and muonic component at primary energies greater than 1017eV.

  12. Particle-tracking investigation of the retention of sucker larvae emerging from spawning grounds in Upper Klamath Lake, Oregon

    Science.gov (United States)

    Wood, Tamara M.; Wherry, Susan A.; Simon, David C.; Markle, Douglas F.

    2014-01-01

    This study had two objectives: (1) to use the results of an individual-based particle-tracking model of larval sucker dispersal through the Williamson River delta and Upper Klamath Lake, Oregon, to interpret field data collected throughout Upper Klamath and Agency Lakes, and (2) to use the model to investigate the retention of sucker larvae in the system as a function of Williamson River flow, wind, and lake elevation. This is a follow-up study to work reported in Wood and others (2014) in which the hydrodynamic model of Upper Klamath Lake was combined with an individual-based, particle-tracking model of larval fish entering the lake from spawning areas in the Williamson River. In the previous study, the performance of the model was evaluated through comparison with field data comprising larval sucker distribution collected in 2009 by The Nature Conservancy, Oregon State University (OSU), and the U.S. Geological Survey, primarily from the (at that time) recently reconnected Williamson River Delta and along the eastern shoreline of Upper Klamath Lake, surrounding the old river mouth. The previous study demonstrated that the validation of the model with field data was moderately successful and that the model was useful for describing the broad patterns of larval dispersal from the river, at least in the areas surrounding the river channel immediately downstream of the spawning areas and along the shoreline where larvae enter the lake. In this study, field data collected by OSU throughout the main body of Upper Klamath Lake, and not just around the Williamson River Delta, were compared to model simulation results. Because the field data were collected throughout the lake, it was necessary to include in the simulations larvae spawned at eastern shoreline springs that were not included in the earlier studies. A complicating factor was that the OSU collected data throughout the main body of the lake in 2011 and 2012, after the end of several years of larval drift

  13. The Apache Longbow-Hellfire Missile Test at Yuma Proving Ground: Ecological Risk Assessment for Tracked Vehicle Movement across Desert Pavement

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Mark J [ORNL; Efroymson, Rebecca Ann [ORNL; Hargrove, William Walter [ORNL

    2008-01-01

    A multiple stressor risk assessment was conducted at Yuma Proving Ground, Arizona, as a demonstration of the Military Ecological Risk Assessment Framework. The focus was a testing program at Cibola Range, which involved an Apache Longbow helicopter firing Hellfire missiles at moving targets, M60-A1 tanks. This paper describes the ecological risk assessment for the tracked vehicle movement component of the testing program. The principal stressor associated with tracked vehicle movement was soil disturbance, and a resulting, secondary stressor was hydrological change. Water loss to washes and wash vegetation was expected to result from increased infiltration and/or evaporation associated with disturbances to desert pavement. The simulated exposure of wash vegetation to water loss was quantified using estimates of exposed land area from a digital ortho quarter quad aerial photo and field observations, a 30 30 m digital elevation model, the flow accumulation feature of ESRI ArcInfo, and a two-step process in which runoff was estimated from direct precipitation to a land area and from water that flowed from upgradient to a land area. In all simulated scenarios, absolute water loss decreased with distance from the disturbance, downgradient in the washes; however, percentage water loss was greatest in land areas immediately downgradient of a disturbance. Potential effects on growth and survival of wash trees were quantified by using an empirical relationship derived from a local unpublished study of water infiltration rates. The risk characterization concluded that neither risk to wash vegetation growth or survival nor risk to mule deer abundance and reproduction was expected. The risk characterization was negative for both the incremental risk of the test program and the combination of the test and pretest disturbances.

  14. MatrixPlot: visualizing sequence constraints

    DEFF Research Database (Denmark)

    Gorodkin, Jan; Stærfeldt, Hans Henrik; Lund, Ole

    1999-01-01

    MatrixPlot: visualizing sequence constraints. Sub-title Abstract Summary : MatrixPlot is a program for making high-quality matrix plots, such as mutual information plots of sequence alignments and distance matrices of sequences with known three-dimensional coordinates. The user can add information...... about the sequences (e.g. a sequence logo profile) along the edges of the plot, as well as zoom in on any region in the plot. Availability : MatrixPlot can be obtained on request, and can also be accessed online at http://www. cbs.dtu.dk/services/MatrixPlot. Contact : gorodkin@cbs.dtu.dk...

  15. MatrixPlot: visualizing sequence constraints

    DEFF Research Database (Denmark)

    Gorodkin, Jan; Stærfeldt, Hans Henrik; Lund, Ole

    1999-01-01

    MatrixPlot: visualizing sequence constraints. Sub-title Abstract Summary : MatrixPlot is a program for making high-quality matrix plots, such as mutual information plots of sequence alignments and distance matrices of sequences with known three-dimensional coordinates. The user can add information...... about the sequences (e.g. a sequence logo profile) along the edges of the plot, as well as zoom in on any region in the plot. Availability : MatrixPlot can be obtained on request, and can also be accessed online at http://www. cbs.dtu.dk/services/MatrixPlot. Contact : gorodkin@cbs.dtu.dk...

  16. Convergence of Place and Plot

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    2010-01-01

    efterladt sig en række mærker og spor som kan læses og fortolkes. Blodspor, rester af negle, hår udgør forskellige (DNA)koder som kan dekrypteres og dechifreres på samme måde som krudtslam, skudhuller, fysiske skader er tegn som skal læses og fortolkes. Som sådan rummer stedet et plot (en fortælling) som...

  17. Vector plotting as an indication of the approach to flutter

    Science.gov (United States)

    Broadbent, E. G.

    1975-01-01

    A binary flexure-torsion analysis was made to check theoretically a method for predicting flutter which depends on plotting vectorially the amplitudes of response relative to the exciting force and extracting the relevant damping rate. The results of this calculation are given in graphs both of the vector plots themselves and of the estimated damping rate against forward speed. The estimated damping rates are compared with calculated values. The method has the advantage that in a flight flutter test damping can be estimated from continuous excitation records: the method is an extension of the Kennedy and Pancu technique used in ground resonance testing.

  18. AUTOMATED TECHNIQUE FOR CREATING LITHOLOGIC LOG PLOTS

    Directory of Open Access Journals (Sweden)

    Kristijan Posavec

    2006-12-01

    Full Text Available Paper presents automated technique for creating lithologic log plots. Technique is based on three computer tools: Microsoft (MS Access program, LogPlot program, and Visual Basic (VB macros for MS Excel. MS Access ensures professional storage of lithologic data which can be in that way easier and faster entered, searched, updated, and also used for different purposes, while LogPlot provides tools for creating lithologic log plots. VB macros enable transfer of lithologic data from MS Access to LogPlot. Data stored in MS Access are exported in ASCII files which are later used by LogPlot for creation of lithologic log plots. Presented concept facilitates creation of lithologic log plots, and automated technique enables processing of a large number of data i.e. creation of lareg number lithologic log plots in a short period of time (the paper is published in Croatian.

  19. Electric Control System Grounding Analysis of Railway Heavy Duty Track Maintenance Machine%铁路大型养路机械电气控制系统接地分析

    Institute of Scientific and Technical Information of China (English)

    程连飞

    2011-01-01

    分析了铁路大型养路机械电气系统的接地方式,阐述了因接地不当对电气控制系统造成的影响,并提出了改进措施.合理的接地能够改善大型养路机械的作业精度,并提高电气控制系统的可靠性和稳定性.%Grounding styles of electric system for the railway heavy duty tracl maintenance machine were analyzed,and impac due to improper grounding as well as improving mesaures of electric control system was described.It was proved that resonable grounding can improve operation accuracy of the railway heavy duty track maintenance machine and the reliability and stability of the electric control system.

  20. Ground Truth Annotation in T Analyst

    DEFF Research Database (Denmark)

    2015-01-01

    This video shows how to annotate the ground truth tracks in the thermal videos. The ground truth tracks are produced to be able to compare them to tracks obtained from a Computer Vision tracking approach. The program used for annotation is T-Analyst, which is developed by Aliaksei Laureshyn, Ph...

  1. Ground Truth Annotation in T Analyst

    DEFF Research Database (Denmark)

    2015-01-01

    This video shows how to annotate the ground truth tracks in the thermal videos. The ground truth tracks are produced to be able to compare them to tracks obtained from a Computer Vision tracking approach. The program used for annotation is T-Analyst, which is developed by Aliaksei Laureshyn, Ph...

  2. Surveillance of Site A and Plot M report for 2010.

    Energy Technology Data Exchange (ETDEWEB)

    Golchert, N. W. (ESQ)

    2011-05-31

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2010 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  3. Surveillance of Site A and Plot M, Report for 2009.

    Energy Technology Data Exchange (ETDEWEB)

    Golchert, N. W.

    2010-04-21

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2009 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  4. PLOT3D: An Interactive Graphics Code for Three Dimensional Plots.

    Science.gov (United States)

    1984-09-28

    all program parameters PLOTF Plots the function y-f(x.z) according to the specified programs parameters. PLOTS Manipulates data for scaling and angles...of rotation; Calls PLOTF to plot each line PERIM Draws the plane of projection and perimeter around the plotted data PLTIF Puts data information on...PLT3T ADISP Clears alphanumeric display PLOTS Same as in PLT3T segment PLOTF Plots on pen plotter instead of the graphics terminal PERIM Same as in

  5. Comparision between thecolor-changed on bull′s-eye plot and global strain of three-dimensional speckle tracking echocardiography for diagnosis coronary artery stenosis%三维斑点追踪牛眼图颜色改变与整体应变诊断冠脉多支病变临床应用价值的研究

    Institute of Scientific and Technical Information of China (English)

    龚晓萍; 李艳红; 穆玉明; 吴治胜

    2016-01-01

    目的:探讨三维斑点追踪(3-dimensional speckle tracking echocardiography,3D-STE )牛眼图颜色改变和整体应变诊断冠脉多支病变的超声心动图特点及其临床应用价值。方法根据冠脉造影的结果,将117例受检者分为冠脉多支组(45例)、单支组(32例)、对照组(40例)。所有受检者行常规经胸二维和三维超声心动图检查,应用3D-STE技术自动生成17节段牛眼图:长轴(LS)、周向(CS)、面积(AS)及径向(RS)应变牛眼图。计算牛眼图中颜色改变节段数,记录左室整体长轴(GLS)、周向(GCS)、面积(GAS)和径向应变(GRS),分析其诊断冠脉多支病变临床应用价值。结果与对照组相比,多支组及单支组牛眼图颜色改变节段数4个参数增多,差异有统计学意义(P <0.05),且多支组增多更明显;多支组整体应变4个参数低于对照组,差异有统计学意义(P <0.05)。与单支组比较,多支组牛眼图颜色改变节段数4个参数增多,但仅周向和面积应变差异有统计学意义(P <0.05)。多支组整体应变4个参数均减低,但差异无统计学意义。ROC分析显示三维斑点追踪牛眼图面积应变诊断冠脉多支病变的灵敏度(86.7%)和特异度(87.5%)最高;整体长轴应变的灵敏度最高(68.9%),整体面积应变的特异度最高(77.5%)。结论三维斑点追踪牛眼图颜色改变节段数与整体应变均能较好地评价冠脉多支病变,而牛眼图颜色改变节段数灵敏度和特异度更高。%Objective To analyze the color-changed on bull′s-eye plot and global strain of three-dimensional speckle tracking echocardiography and to assess the value in the detection n of coronary stenosis.Methods A total of 1 1 7 consecutive patients were enrolled and divided into the following three groups according to the coronary angiography (CAG

  6. Fifth International Symposium on Recurrence Plot

    CERN Document Server

    Riley, Michael; Giuliani, Alessandro; Webber, Charles; Jr, Jr; Translational Recurrences : From Mathematical Theory to Real-World Applications

    2014-01-01

    This book features 13 papers presented at the Fifth International Symposium on Recurrence Plots, held August 2013 in Chicago, IL. It examines recent applications and developments in recurrence plots and recurrence quantifi cation analysis (RQA) with special emphasis on biological and cognitive systems and the analysis of coupled systems using cross-recurrence methods. Readers will discover new applications and insights into a range of systems provided by recurrence plot analysis and new theoretical and mathematical developments in recurrence plots. Recurrence plot based analysis is a powerful tool that operates on real-world complex systems that are nonlinear, non-stationary, noisy, of any statistical distribution, free of any particular model type, and not particularly long. Quantitative analyses promote the detection of system state changes, synchronized dynamical regimes, or classifi cation of system states. Th e book will be of interest to an interdisciplinary audience of recurrence plot users and researc...

  7. Simulations of Ground-Water Flow, Transport, Age, and Particle Tracking near York, Nebraska, for a Study of Transport of Anthropogenic and Natural Contaminants (TANC) to Public-Supply Wells

    Science.gov (United States)

    Clark, Brian R.; Landon, Matthew K.; Kauffman, Leon J.; Hornberger, George Z.

    2008-01-01

    can occur and that the calibrated model resulted in smaller differences than the alternative models between simulated and interpreted ages and measured tracer concentrations in most, but not all, wells. Results of the first alternative model indicate that the distribution of young water in the upper confined aquifer is substantially different when well-bore leakage at known abandoned wells and test holes is removed from the model. In the second alternative model, simulated age near the bottom of the unconfined aquifer was younger than interpreted ages and simulated chlorofluorocarbon-11 concentrations in the upper confined aquifer were zero in five out of six wells because the conventional Well Package fails to account for flow between model layers though well bores. The third alternative model produced differences between simulated and interpreted ground-water ages and measured chlorofluorocarbon-11 concentrations that were comparable to the calibrated model. However, simulated hydraulic heads deviated from measured hydraulic heads by a greater amount than for the calibrated model. Even so, because the third alternative model simulates steady-state flow, additional analysis was possible using steady-state particle tracking to assess the contributing recharge area to a public supply well selected for analysis of factors contributing to well vulnerability. Results from particle-tracking software (MODPATH) using the third alternative model indicates that the contributing recharge area of the study public-supply well is a composite of elongated, seemingly isolated areas associated with wells that are screened in multiple aquifers. The simulated age distribution of particles at the study public-supply well indicates that all water younger than 58 years travels through well bores of wells screened in multiple aquifers. The age distribution from the steady-state model using MODPATH estimates the youngest 7 percent of the water to have a flow-weighted mean age

  8. Faithfulness of Recurrence Plots: A Mathematical Proof

    Science.gov (United States)

    Hirata, Yoshito; Komuro, Motomasa; Horai, Shunsuke; Aihara, Kazuyuki

    It is practically known that a recurrence plot, a two-dimensional visualization of time series data, can contain almost all information related to the underlying dynamics except for its spatial scale because we can recover a rough shape for the original time series from the recurrence plot even if the original time series is multivariate. We here provide a mathematical proof that the metric defined by a recurrence plot [Hirata et al., 2008] is equivalent to the Euclidean metric under mild conditions.

  9. Adding stress plot function to NASTRAN

    Science.gov (United States)

    Katoh, S.

    1978-01-01

    Stress plot function was developed and added to the NASTRAN level 15.5. Computed stress distribution can be displayed by this function, with vectors showing the principal stresses of the finite elements over the specified portions of the structure. NASTRAN is reviewed in the aspect of plotting capabilities. Stress tensor field is examined in preparation of stress display. Then the stress plot function as added to the NASTRAN is described. A sample plotout by this function is shown.

  10. An Excel macro for generating trilinear plots.

    Science.gov (United States)

    Shikaze, Steven G; Crowe, Allan S

    2007-01-01

    This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.

  11. Representing uncertainty on model analysis plots

    Science.gov (United States)

    Smith, Trevor I.

    2016-12-01

    Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model. Unfortunately, Bao's original presentation of the model plot did not include a way to represent uncertainty in these measurements. I present details of a method to add error bars to model plots by expanding the work of Sommer and Lindell. I also provide a template for generating model plots with error bars.

  12. plotKML: Scientific Visualization of Spatio-Temporal Data

    Directory of Open Access Journals (Sweden)

    Tomislav Hengl

    2015-02-01

    Full Text Available plotKML is an R package that provides methods for writing the most common R spatial classes into KML files. It builds up on the existing XML parsing functionality (XML package, and provides similar plotting functionality as the lattice package. Its main objective is to provide a simple interface to generate KML files with a small number of arguments, and allows users to visually explore spatio-temporal data available in R: points, polygons, gridded maps, trajectory-type data, vertical profiles, ground photographs, time series vector objects or raster images, along with the results of spatial analysis such as geostatistical mapping, spatial simulations of vector and gridded objects, optimized sampling designs, species distribution models and similar. A generic plotKML( function automatically determines the parsing order and visualizes data directly from R; lower level functions can be combined to allow for new user-created visualization templates. In comparison to other packages writing KML, plotKML seems to be more object oriented, it links more closely to the existing R classes for spatio-temporal data (sp, spacetime and raster packages than the alternatives, and provides users with the possibility to create their own templates.

  13. Cooperative tracking of ground moving target using unmanned aerial vehicles in cluttered environment%复杂环境下多无人机协作式地面移动目标跟踪

    Institute of Scientific and Technical Information of China (English)

    王林; 彭辉; 朱华勇; 沈林成

    2011-01-01

    针对多无人机(UAV)协同地面移动目标跟踪问题展开研究.提出一种基于主动感知的问题求解框架,建立多UAV协同目标跟踪问题模型;在此基础上,采用分布式无色信息滤波实现目标状态融合估计与预测;然后,基于预测目标状态,结合滚动时域控制与遗传算法设计一种多UAV在线协同航迹规划算法.仿真结果表明:结合预测目标状态在线优化UAV航迹能够获得更好的目标跟踪性能.%We investigate the cooperative tracking of a ground moving target in a cluttered environment by using unmanned aerial vehicles(UAV). Firstly, a model the cooperative target tracking by UAV is developed based on active sensing;secondly, a distributed unscented information filter is built for the estimation fusion and the prediction of target states. Finally, an online trajectory planning algorithm based on the receding horizon control and the genetic algorithm is designed and implemented, with the predicted target states as the inputs to this planning algorithm. Numerical simulations demonstrate that the proposed method effectively improves the performance of target tracking.

  14. A Ground Target Tracking Approach for UAVs with Intermittent Measurements%一种间断观测下的无人机地面目标跟踪方法

    Institute of Scientific and Technical Information of China (English)

    谢斌; 项志宇

    2011-01-01

    提出了一种基于贝叶斯滤波器和适航地图的跟踪算法(BF-Hmap),解决间断观测下的无人机地面目标跟踪问题.采用基于中心线和梯度图的快速道路提取算法生成目标适航地图,该图描述了地面目标与当前地形相关的运动能力.采用贝叶斯滤波器分两步在线更新目标状态的后验概率分布,即在预测阶段考虑适航地图对目标运动的约束,以及在估计阶段充分利用目标的所有观测信息.仿真结果表明,在间断观测下该算法对地面机动目标有着良好的跟踪效果.%A tracking algorithm using Bayesian filter and hospitability map (BF-HMap) is proposed to deal with the ground target tracking problem for unmanned aerial vehicles (UAVs) with intermittent measurements. The hospitability map, which describes the terrain-dependent motion capability of ground targets, is built through a centerline-and-gradient-based road detection method. The posterior probability density function (PDF) of the target state is maintained on-line through a Bayesian filter in two stages: the prediction stage takes into account the motion constraint provided by hospitability map and the estimation stage considers of all detection information that both the target is detected or not. Simulations show that the proposed approach provides a feasible solution to tracking maneuvering targets with intermittent measurements.

  15. International Ice Patrol Iceberg Drift Tracks

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The International Ice Patrol (IIP) tracks, plots and predicts iceberg positions in the North Atlantic Ocean. The IIP area of responsibility is 40 to 52 degrees...

  16. Study of ground vibration from trains caused by track irregularities%列车运行时由轨道不平顺引起的地基振动研究

    Institute of Scientific and Technical Information of China (English)

    蔡袁强; 王玉; 曹志刚; 徐长节

    2012-01-01

    采用半解析法研究了列车荷载作用下列车-轨道-饱和地基系统的耦合振动问题.研究模型共分为3部分:车体简化为一个多刚体系统,在车轮与钢轨之间引入线性Hertizian弹簧接触模型模拟轮轨动力相互作用、采用离散轨枕支撑的弹性Euler梁来模拟轨道系统、下卧土体采用多孔饱和半空间模型.列车荷载分为轴重和由轨道不平顺引起的轮轨动力相互作用力.采用Fourier变换分别求解各子系统的控制方程,并通过动力子结构法对各子系统进行耦合.土体在时域内的动力响应通过快速Fourier变换求得.在分析了轮轨动力相互作用力的基础上,研究了轮轨动力作用力和列车轴重作用下饱和地基的动力响应,并分析了轨枕间距和土体渗透系数对饱和地基振动响应的影响.研究表明,轮轨动力作用力对地基远场振动有重要贡献,同时枕木间距对轨道与地基振动响应有较大影响.%The vibrations of vehicle-track-saturated ground coupling system subjected to moving train loads are investigated by a semi-analytical approach. The theoretical model is divided into three components: the vehicle is described as a multi-rigid-body system, and a linear Hertizian contact spring between each wheel and the rail is used to simulate the dynamic wheel-rail interaction forces; a periodically supported Euler beam is introduced to simulate the track system; a fully saturated poroelastic half-space is used to simulate the ground and governed by Biot's theory. Train loads include two parts: the axle loads and the dynamic wheel-rail loads assumed to be generated from the track irregularity. The governing equations of each component are solved by using Fourier transform, and these components of the whole system are integrated to meet the displacement compatibility and force equilibrium by the substructure method. The time domain responses of the ground are obtained through the fast Fourier

  17. Issues in Target Tracking

    Science.gov (United States)

    2010-05-01

    the CUSUM (Page) test yields the quickest detection of a change of distribution for the case of i.i.d. observations [3]. In fact, in a (highly...11. Autocorrelation of the CUSUM increments, sn, under H1 (target present). Issues in Target Tracking RTO-EN-SET-157(2010...restrictive condition that the increments of the cumulative sum, sn, be i.i.d. [3], [22]. Fig. 11 plots the autocorrelation of the CUSUM increments as a

  18. Box Plots in the Australian Curriculum

    Science.gov (United States)

    Watson, Jane M.

    2012-01-01

    This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

  19. The Heuristic Interpretation of Box Plots

    Science.gov (United States)

    Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

    2013-01-01

    Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

  20. Reaction Order Ambiguity in Integrated Rate Plots

    Science.gov (United States)

    Lee, Joe

    2008-01-01

    Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…

  1. Box Plots in the Australian Curriculum

    Science.gov (United States)

    Watson, Jane M.

    2012-01-01

    This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge necessary to use them…

  2. A Discussion on Mean Excess Plots

    CERN Document Server

    Ghosh, Souvik

    2009-01-01

    A widely used tool in the study of risk, insurance and extreme values is the mean excess plot. One use is for validating a Generalized Pareto model for the excess distribution. This paper investigates some theoretical and practical aspects of the use of the mean excess plot.

  3. Tracking contamination through ground beef production and identifying points of recontamination using a novel green fluorescent protein (GFP) expressing, E. coli O103, non-pathogenic surrogate

    Science.gov (United States)

    Introduction: Commonly, ground beef processors conduct studies to model contaminant flow through their production systems using surrogate organisms. Typical surrogate organisms may not behave as Escherichia coli O157:H7 during grinding and are not easy to detect at very low levels. Purpose: Develop...

  4. Surveillance of Site A and Plot M - Report for 2006.

    Energy Technology Data Exchange (ETDEWEB)

    Golchert, N. W.; ESH/QA Oversight

    2007-05-07

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2006 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (PlotM) to the hand pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red GateWoods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  5. Surveillance of Site A and Plot M, Report for 2008.

    Energy Technology Data Exchange (ETDEWEB)

    Golchert, N. W.

    2009-05-07

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2008 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  6. Surveillance of site A and plot M, report for 2007.

    Energy Technology Data Exchange (ETDEWEB)

    Golchert, N. W.; ESH/QA Oversight

    2008-03-25

    The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2007 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to: (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

  7. Correlations in Nuclear Arrhenius-Type Plots

    CERN Document Server

    Tsang, M B

    1998-01-01

    Arrhenius-type plots for multifragmentation process, defined as the transverse energy dependence of the single-fragment emission-probability, -ln(p_{b}) vs 1/sqrt(E_{t}), have been studied by examining the relationship of the parameters p_{b} and E_{t} to the intermediate-mass fragment multiplicity . The linearity of these plots reflects the correlation of the fragment multiplicity with the transverse energy. These plots may not provide thermal scaling information about fragment production as previously suggested.

  8. Split-plot designs for multistage experimentation

    DEFF Research Database (Denmark)

    Kulahci, Murat; Tyssedal, John

    2016-01-01

    at the same time will be more efficient. However, there have been only a few attempts in the literature to provide an adequate and easy-to-use approach for this problem. In this paper, we present a novel methodology for constructing two-level split-plot and multistage experiments. The methodology is based...... be accommodated in each stage. Furthermore, split-plot designs for multistage experiments with good projective properties are also provided....

  9. PRP: a FORTRAN IV interactive plotting program

    Science.gov (United States)

    Andrew, A. S.; Linde, J.

    A computer program, PRP, has been designed to plot any arithmetic combination selected from a set of major and trace element data on a y- x graph. y and x are defined and entered as a program string (y, x) which is interpreted sequentially. Operators ( +, -, ∗, /, ( unary) , square root, log 10, In c, antilog 10, exponential, integer, absolute value, (,),,) and integer or real numbers may be included. Axis lengths and scales are determined by the user. Five different plotting symbols are available.

  10. Generalised Recurrence Plot Analysis for Spatial Data

    OpenAIRE

    Marwan, Norbert; Kurths, Juergen; Saparin, Peter

    2006-01-01

    Recurrence plot based methods are highly efficient and widely accepted tools for the investigation of time series or one-dimensional data. We present an extension of the recurrence plots and their quantifications in order to study recurrent structures in higher-dimensional spatial data. The capability of this extension is illustrated on prototypical 2D models. Next, the tested and proved approach is applied to assess the bone structure from CT images of human proximal tibia. We find that the ...

  11. Development of TRatioPlot in ROOT

    CERN Document Server

    Gessinger-Befurt, Paul

    2016-01-01

    The ROOT data analysis and visualization framework is a software package which is widely used in physics, especially in high energy physics. A common visualization which has so far been lacking a direct implementation is the ratio plot, as well as a few similar types of plots. The scope and goal of the summer student project at CERN was to implement a class in ROOT itself, that can take care of the most common types of calculations, and produces high quality visuals.

  12. Potential applications of prefield land use and canopy cover data: Examples from nonforest and nonsampled forest inventory plots

    Science.gov (United States)

    Sara A. Goeking

    2012-01-01

    The Forest Inventory and Analysis (FIA) prefield workflow involves interpreting aerial imagery to determine whether each plot in a given inventory year may meet FIA’s definition of forest land. The primary purpose of this determination is to minimize inventory costs by avoiding unnecessary ground surveys of plots that are obviously in nonforest areas. Since the...

  13. Longitudinal strain bull's eye plot patterns in patients with cardiomyopathy and concentric left ventricular hypertrophy.

    Science.gov (United States)

    Liu, Dan; Hu, Kai; Nordbeck, Peter; Ertl, Georg; Störk, Stefan; Weidemann, Frank

    2016-05-10

    Despite substantial advances in the imaging techniques and pathophysiological understanding over the last decades, identification of the underlying causes of left ventricular hypertrophy by means of echocardiographic examination remains a challenge in current clinical practice. The longitudinal strain bull's eye plot derived from 2D speckle tracking imaging offers an intuitive visual overview of the global and regional left ventricular myocardial function in a single diagram. The bull's eye mapping is clinically feasible and the plot patterns could provide clues to the etiology of cardiomyopathies. The present review summarizes the longitudinal strain, bull's eye plot features in patients with various cardiomyopathies and concentric left ventricular hypertrophy and the bull's eye plot features might serve as one of the cardiac workup steps on evaluating patients with left ventricular hypertrophy.

  14. 6th International Symposium on Recurrence Plots

    CERN Document Server

    Jr, Jr; Ioana, Cornel; Marwan, Norbert

    2016-01-01

    The chapters in this book originate from the research work and contributions presented at the Sixth International Symposium on Recurrence Plots held in Grenoble, France in June 2015. Scientists from numerous disciplines gathered to exchange knowledge on recent applications and developments in recurrence plots and recurrence quantification analysis. This meeting was remarkable because of the obvious expansion of recurrence strategies (theory) and applications (practice) into ever-broadening fields of science. It discusses real-world systems from various fields, including mathematics, strange attractors, applied physics, physiology, medicine, environmental and earth sciences, as well as psychology and linguistics. Even readers not actively researching any of these particular systems will benefit from discovering how other scientists are finding practical non-linear solutions to specific problems. The book is of interest to an interdisciplinary audience of recurrence plot users and researchers interested in time...

  15. BOREAS TE-23 Map Plot Data

    Science.gov (United States)

    Rich, Paul M.; Fournier, Robert; Hall, Forrest G. (Editor); Papagno, Andrea (Editor)

    2000-01-01

    The Boreal Ecosystem-Atmospheric Study (BOREAS) TE-23 (Terrestrial Ecology) team collected map plot data in support of its efforts to characterize and interpret information on canopy architecture and understory cover at the BOREAS tower flux sites and selected auxiliary sites from May to August 1994. Mapped plots (typical dimensions 50 m x 60 m) were set up and characterized at all BOREAS forested tower flux and selected auxiliary sites. Detailed measurement of the mapped plots included: (1) stand characteristics (location, density, basal area); (2) map locations diameter at breast height (DBH) of all trees; (3) detailed geometric measures of a subset of trees (height, crown dimensions); and (4) understory cover maps. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

  16. Application of mapped plots for single-owner forest surveys

    Science.gov (United States)

    Paul C. Van Deusen; Francis Roesch

    2009-01-01

    Mapped plots are used for the nation forest inventory conducted by the U.S. Forest Service. Mapped plots are also useful foro single ownership inventoires. Mapped plots can handle boundary overlap and can aprovide less variable estimates for specified forest conditions. Mapping is a good fit for fixed plot inventories where the fixed area plot is used for both mapping...

  17. PLOT3D Export Tool for Tecplot

    Science.gov (United States)

    Alter, Stephen

    2010-01-01

    The PLOT3D export tool for Tecplot solves the problem of modified data being impossible to output for use by another computational science solver. The PLOT3D Exporter add-on enables the use of the most commonly available visualization tools to engineers for output of a standard format. The exportation of PLOT3D data from Tecplot has far reaching effects because it allows for grid and solution manipulation within a graphical user interface (GUI) that is easily customized with macro language-based and user-developed GUIs. The add-on also enables the use of Tecplot as an interpolation tool for solution conversion between different grids of different types. This one add-on enhances the functionality of Tecplot so significantly, it offers the ability to incorporate Tecplot into a general suite of tools for computational science applications as a 3D graphics engine for visualization of all data. Within the PLOT3D Export Add-on are several functions that enhance the operations and effectiveness of the add-on. Unlike Tecplot output functions, the PLOT3D Export Add-on enables the use of the zone selection dialog in Tecplot to choose which zones are to be written by offering three distinct options - output of active, inactive, or all zones (grid blocks). As the user modifies the zones to output with the zone selection dialog, the zones to be written are similarly updated. This enables the use of Tecplot to create multiple configurations of a geometry being analyzed. For example, if an aircraft is loaded with multiple deflections of flaps, by activating and deactivating different zones for a specific flap setting, new specific configurations of that aircraft can be easily generated by only writing out specific zones. Thus, if ten flap settings are loaded into Tecplot, the PLOT3D Export software can output ten different configurations, one for each flap setting.

  18. Generalised recurrence plot analysis for spatial data

    Energy Technology Data Exchange (ETDEWEB)

    Marwan, Norbert [Institute of Physics, University of Potsdam, 14415 Potsdam (Germany)]. E-mail: marwan@agnld.uni-potsdam.de; Kurths, Juergen [Institute of Physics, University of Potsdam, 14415 Potsdam (Germany); Saparin, Peter [Department of Biomaterials, Max Planck Institute of Colloids and Interfaces, 14424 Potsdam-Golm (Germany)

    2007-01-08

    Recurrence plot based methods are highly efficient and widely accepted tools for the investigation of time series or one-dimensional data. We present an extension of the recurrence plots and their quantifications in order to study recurrent structures in higher-dimensional spatial data. The capability of this extension is illustrated on prototypical 2D models. Next, the tested and proved approach is applied to assess the bone structure from CT images of human proximal tibia. We find that the spatial structures in trabecular bone become more recurrent during the bone loss in osteoporosis.

  19. Persistent Aerial Tracking

    KAUST Repository

    Mueller, Matthias

    2016-04-13

    In this thesis, we propose a new aerial video dataset and benchmark for low altitude UAV target tracking, as well as, a photo-realistic UAV simulator that can be coupled with tracking methods. Our benchmark provides the rst evaluation of many state of-the-art and popular trackers on 123 new and fully annotated HD video sequences captured from a low-altitude aerial perspective. Among the compared trackers, we determine which ones are the most suitable for UAV tracking both in terms of tracking accuracy and run-time. We also present a simulator that can be used to evaluate tracking algorithms in real-time scenarios before they are deployed on a UAV "in the field", as well as, generate synthetic but photo-realistic tracking datasets with free ground truth annotations to easily extend existing real-world datasets. Both the benchmark and simulator will be made publicly available to the vision community to further research in the area of object tracking from UAVs. Additionally, we propose a persistent, robust and autonomous object tracking system for unmanned aerial vehicles (UAVs) called Persistent Aerial Tracking (PAT). A computer vision and control strategy is applied to a diverse set of moving objects (e.g. humans, animals, cars, boats, etc.) integrating multiple UAVs with a stabilized RGB camera. A novel strategy is employed to successfully track objects over a long period, by \\'handing over the camera\\' from one UAV to another. We integrate the complete system into an off-the-shelf UAV, and obtain promising results showing the robustness of our solution in real-world aerial scenarios.

  20. Analysis of global and regional CO burdens measured from space between 2000 and 2009 and validated by ground-based solar tracking spectrometers

    Directory of Open Access Journals (Sweden)

    L. Yurganov

    2010-04-01

    Full Text Available Interannual variations in AIRS and MOPITT retrieved CO burdens are validated, corrected, and compared with CO emissions from wild fires from the Global Fire Emission Dataset (GFED2 inventory. Validation of daily mean CO total column (TC retrievals from MOPITT version 3 and AIRS version 5 is performed through comparisons with archived TC data from the Network for Detection of Atmospheric Composition Change (NDACC ground-based Fourier Transform Spectrometers (FTS between March 2000 and December 2007. MOPITT V3 retrievals exhibit an increasing temporal bias with a rate of 1.4–1.8% per year; thus far, AIRS retrievals appear to be more stable. For the lowest CO values in the Southern Hemisphere (SH, AIRS TC retrievals overestimate FTS TC by 20%. MOPITT's bias and standard deviation do not depend on CO TC absolute values. Empirical corrections are derived for AIRS and MOPITT retrievals based on the observed annually averaged bias versus the FTS TC. Recently published MOPITT V4 is found to be in a good agreement with MOPITT V3 corrected by us (with exception of 2000–2001 period. With these corrections, CO burdens from AIRS V5 and MOPITT V3 (as well as MOPITT V4 come into good agreement in the mid-latitudes of the Northern Hemisphere (NH and in the tropical belt. In the SH, agreement between AIRS and MOPITT CO burdens is better for the larger CO TC in austral winter and worse in austral summer when CO TC are smaller. Before July 2008, all variations in retrieved CO burden can be explained by changes in fire emissions. After July 2008, global and tropical CO burdens decreased until October before recovering by the beginning of 2009. The NH CO burden also decreased but reached a minimum in January 2009 before starting to recover. The decrease in tropical CO burdens is explained by lower than usual fire emissions in South America and Indonesia. This decrease in tropical emissions also accounts for most of the change in the global CO burden. However, no

  1. A reduced volumetric expansion factor plot

    Science.gov (United States)

    Hendricks, R. C.

    1979-01-01

    A reduced volumetric expansion factor plot has been constructed for simple fluids which is suitable for engineering computations in heat transfer. Volumetric expansion factors have been found useful in correlating heat transfer data over a wide range of operating conditions including liquids, gases and the near critical region.

  2. Cooperative ground moving target track method using two unmanned aerial vehicles%一种双无人机协同跟踪地面移动目标方法

    Institute of Scientific and Technical Information of China (English)

    符小卫; 侯建永; 高晓光; 刘重

    2013-01-01

    This paper investigated the cooperative tracking of a ground moving target using two unmanned aerial vehicles under communication delay,and constructed an algorithm model.Considering the communication delay,it proposed a data fusion method combined with the recursive least squares filtering and the weighted least squres.Then it built the recursive least squares filtering for the prediction of target states,designed a trajectory planning algorithm based on receding horizon and the distributed genetic algorithm to implement the task of cooperative target tracking using two unmanned aerial vehicles.The fitness function consisted of several components including the distance of vehicles and target,the communication distance of vehicles,the communication angle of vehicles.Simulation studies show the cooperative track algorithm can implement the track task well;compared to one vehicle track the target,the position error decreases obviously,the position error during to the communication delay can decrease.%针对通信延时情况下双无人机协同跟踪地面移动目标问题进行研究,构建了基于分布式遗传算法和滚动时域优化结合的目标跟踪航迹规划算法模型.考虑到通信延时会增加目标状态信息数据融合时的误差,导致无人机跟踪任务效果变差,结合递推最小二乘滤波和加权最小二乘估计设计了融合方法,来融合处理目标状态信息;考虑到无人机对目标的观测效果与未来时刻的目标状态信息密切相关,采用递推最小二乘滤波预测目标的状态信息,结合分布式遗传算法和滚动时域优化设计了双无人机目标跟踪航迹规划算法.适应度函数考虑了无人机和目标之间的距离、无人机之间的通信距离、无人机之间的通信角度.仿真结果表明:该协同跟踪方法能够较好地完成跟踪任务;与一架无人机跟踪相比误差明显减小,并且可以减小通信延时带来的跟踪误差.

  3. Subsurface investigation with ground penetrating radar

    Science.gov (United States)

    Ground penetrating radar (GPR) data was collected on a small test plot at the OTF/OSU Turfgrass Research & Education Facility in Columbus, Ohio. This test plot was built to USGA standards for a golf course green, with a constructed sand layer just beneath the surface overlying a gravel layer, that i...

  4. FLOWCHART; a computer program for plotting flowcharts

    Science.gov (United States)

    Bender, Bernice

    1982-01-01

    The computer program FLOWCHART can be used to very quickly and easily produce flowcharts of high quality for publication. FLOWCHART centers each element or block of text that it processes on one of a set of (imaginary) vertical lines. It can enclose a text block in a rectangle, circle or other selected figure. It can draw a 'line connecting the midpoint of any side of any figure with the midpoint of any side of any other figure and insert an arrow pointing in the direction of flow. It can write 'yes' or 'no' next to the line joining two figures. FLOWCHART creates flowcharts using some basic plotting subroutine* which permit plots to be generated interactively and inspected on a Tektronix compatible graphics screen or plotted in a deferred mode on a Houston Instruments 42' pen plotter. The size of the plot, character set and character height in inches are inputs to the program. Plots generated using the pen plotter can be up to 42' high--the larger size plots being directly usable as visual aids in a talk. FLOWCHART centers each block of text on an imaginary column line. (The number of columns and column width are specified as input.) The midpoint of the longest line of text within the block is defined to be the center of the block and is placed on the column line. The spacing of individual words within the block is not altered when the block is positioned. The program writes the first block of text in a designated column and continues placing each subsequent block below the previous block in the same column. A block of text may be placed in a different column by specifying the number of the column and an earlier block of text with which the new block is to be aligned. If block zero is given as the earlier block, the new text is placed in the new column continuing down the page below the previous block. Optionally a column and number of inches from the top of the page may be given for positioning the next block of text. The program will normally draw one of five

  5. PetroPlot: A plotting and data management tool set for Microsoft Excel

    Science.gov (United States)

    Su, Yongjun; Langmuir, Charles H.; Asimow, Paul D.

    2003-03-01

    PetroPlot is a 4000-line software code written in Visual Basic for the spreadsheet program Excel that automates plotting and data management tasks for large amount of data. The major plotting functions include: automation of large numbers of multiseries XY plots; normalized diagrams (e.g., spider diagrams); replotting of any complex formatted diagram with multiple series for any other axis parameters; addition of customized labels for individual data points; and labeling flexible log scale axes. Other functions include: assignment of groups for samples based on multiple customized criteria; removal of nonnumeric values; calculation of averages/standard deviations; calculation of correlation matrices; deletion of nonconsecutive rows; and compilation of multiple rows of data for a single sample to single rows appropriate for plotting. A cubic spline function permits curve fitting to complex time series, and comparison of data to the fits. For users of Excel, PetroPlot increases efficiency of data manipulation and visualization by orders of magnitude and allows exploration of large data sets that would not be possible making plots individually. The source codes are open to all users.

  6. Realtime multi-plot graphics system

    Science.gov (United States)

    Shipkowski, Michael S.

    1990-01-01

    The increased complexity of test operations and customer requirements at Langley Research Center's National Transonic Facility (NTF) surpassed the capabilities of the initial realtime graphics system. The analysis of existing hardware and software and the enhancements made to develop a new realtime graphics system are described. The result of this effort is a cost effective system, based on hardware already in place, that support high speed, high resolution, generation and display of multiple realtime plots. The enhanced graphics system (EGS) meets the current and foreseeable future realtime graphics requirements of the NTF. While this system was developed to support wind tunnel operations, the overall design and capability of the system is applicable to other realtime data acquisition systems that have realtime plot requirements.

  7. External Use of TOPCAT's Plotting Library

    CERN Document Server

    Taylor, M B

    2014-01-01

    The table analysis application TOPCAT uses a custom Java plotting library for highly configurable high-performance interactive or exported visualisations in two and three dimensions. We present here a variety of ways for end users or application developers to make use of this library outside of the TOPCAT application: via the command-line suite STILTS or its Jython variant JyStilts, via a traditional Java API, or by programmatically assigning values to a set of parameters in java code or using some form of inter-process communication. The library has been built with large datasets in mind; interactive plots scale well up to several million points, and static output to standard graphics formats is possible for unlimited sized input data.

  8. Convex Arrhenius plots and their interpretation

    Science.gov (United States)

    Truhlar, Donald G.; Kohen, Amnon

    2001-01-01

    This paper draws attention to selected experiments on enzyme-catalyzed reactions that show convex Arrhenius plots, which are very rare, and points out that Tolman's interpretation of the activation energy places a fundamental model-independent constraint on any detailed explanation of these reactions. The analysis presented here shows that in such systems, the rate coefficient as a function of energy is not just increasing more slowly than expected, it is actually decreasing. This interpretation of the data provides a constraint on proposed microscopic models, i.e., it requires that any successful model of a reaction with a convex Arrhenius plot should be consistent with the microcanonical rate coefficient being a decreasing function of energy. The implications and limitations of this analysis to interpreting enzyme mechanisms are discussed. This model-independent conclusion has broad applicability to all fields of kinetics, and we also draw attention to an analogy with diffusion in metastable fluids and glasses. PMID:11158559

  9. FERMI/GLAST Integrated Trending and Plotting System Release 5.0

    Science.gov (United States)

    Ritter, Sheila; Brumer, Haim; Reitan, Denise

    2012-01-01

    An Integrated Trending and Plotting System (ITPS) is a trending, analysis, and plotting system used by space missions to determine performance and status of spacecraft and its instruments. ITPS supports several NASA mission operational control centers providing engineers, ground controllers, and scientists with access to the entire spacecraft telemetry data archive for the life of the mission, and includes a secure Web component for remote access. FERMI/GLAST ITPS Release 5.0 features include the option to display dates (yyyy/ddd) instead of orbit numbers along orbital Long-Term Trend (LTT) plot axis, the ability to save statistics from daily production plots as image files, and removal of redundant edit/create Input Definition File (IDF) screens. Other features are a fix to address invalid packet lengths, a change in naming convention of image files in order to use in script, the ability to save all ITPS plot images (from Windows or the Web) as GIF or PNG format, the ability to specify ymin and ymax on plots where previously only the desired range could be specified, Web interface capability to plot IDFs that contain out-oforder page and plot numbers, and a fix to change all default file names to show yyyydddhhmmss time stamps instead of hhmmssdddyyyy. A Web interface capability sorts files based on modification date (with newest one at top), and the statistics block can be displayed via a Web interface. Via the Web, users can graphically view the volume of telemetry data from each day contained in the ITPS archive in the Web digest. The ITPS could be also used in nonspace fields that need to plot data or trend data, including financial and banking systems, aviation and transportation systems, healthcare and educational systems, sales and marketing, and housing and construction.

  10. Extended quantification of the generalized recurrence plot

    Science.gov (United States)

    Riedl, Maik; Marwan, Norbert; Kurths, Jürgen

    2016-04-01

    The generalized recurrence plot is a modern tool for quantification of complex spatial patterns. Its application spans the analysis of trabecular bone structures, Turing structures, turbulent spatial plankton patterns, and fractals. But, it is also successfully applied to the description of spatio-temporal dynamics and the detection of regime shifts, such as in the complex Ginzburg-Landau- equation. The recurrence plot based determinism is a central measure in this framework quantifying the level of regularities in temporal and spatial structures. We extend this measure for the generalized recurrence plot considering additional operations of symmetry than the simple translation. It is tested not only on two-dimensional regular patterns and noise but also on complex spatial patterns reconstructing the parameter space of the complex Ginzburg-Landau-equation. The extended version of the determinism resulted in values which are consistent to the original recurrence plot approach. Furthermore, the proposed method allows a split of the determinism into parts which based on laminar and non-laminar regions of the two-dimensional pattern of the complex Ginzburg-Landau-equation. A comparison of these parts with a standard method of image classification, the co-occurrence matrix approach, shows differences especially in the description of patterns associated with turbulence. In that case, it seems that the extended version of the determinism allows a distinction of phase turbulence and defect turbulence by means of their spatial patterns. This ability of the proposed method promise new insights in other systems with turbulent dynamics coming from climatology, biology, ecology, and social sciences, for example.

  11. AvoPlot: An extensible scientific plotting tool based on matplotlib

    Directory of Open Access Journals (Sweden)

    Nial Peters

    2014-02-01

    Full Text Available AvoPlot is a simple-to-use graphical plotting program written in Python and making extensive use of the matplotlib plotting library. It can be found at http://code.google.com/p/avoplot/. In addition to providing a user-friendly interface to the powerful capabilities of the matplotlib library, it also offers users the possibility of extending its functionality by creating plug-ins. These can import specific types of data into the interface and also provide new tools for manipulating them. In this respect, AvoPlot is a convenient platform for researchers to build their own data analysis tools on top of, as well as being a useful standalone program.

  12. 9 CFR 108.3 - Preparation of plot plans.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of plot plans. 108.3... LICENSED ESTABLISHMENTS § 108.3 Preparation of plot plans. Plot plans shall show all of the buildings on a... on the plot plan the use of immediate adjacent properties such as, residential area, pasture,...

  13. Split-Plot Designs with Mirror Image Pairs as Subplots

    DEFF Research Database (Denmark)

    Tyssedal, John; Kulahci, Murat; Bisgaard, Soren

    2011-01-01

    In this article we investigate two-level split-plot designs where the sub-plots consist of only two mirror image trials. Assuming third and higher order interactions negligible, we show that these designs divide the estimated effects into two orthogonal sub-spaces, separating sub-plot main effects...... and sub-plot by whole-plot interactions from the rest. Further we show how to construct split-plot designs of projectivity P≥3. We also introduce a new class of split-plot designs with mirror image pairs constructed from non-geometric Plackett–Burman designs. The design properties of such designs are very...

  14. Optimal plot design in a multipurpose forest inventory

    Directory of Open Access Journals (Sweden)

    Helena M. Henttonen

    2015-12-01

    Full Text Available Background: We explore the factors affecting the optimal plot design (size and type as well as the subsample tree selection strategies within a plot and their relative importance in defining the optimal plot design in amultipurpose forest inventory. The factors include time used to lay out the plot and to make the tree measurements within the plot, the between-plot variation of each of the variables of interest in the area, and the measurement and model errors for the different variables. Methods: We simulate different plot types and sizes and subsample tree selection strategies on measuredtest areas from North Lapland. The plot types used are fixed-radius, concentric and relascope plots. Weselect the optimal type and size first at plot level using a cost-plus-loss approach and then at cluster level byminimizing the weighted standard error with fixed budget. Results: As relascope plots are very efficient at the plot level for volume and basal area, and fixed-radius plots for stems per ha, the optimal plot type strongly depends on the relative importance of these variables. The concentric plot seems to be a good compromise between these two in many cases. The subsample tree selection strategy was more important in selecting optimal plot than many other factors. In cluster level, the most important factor is the transfer time between plots. Conclusions: While the optimal radius of plots and other parameters were sensitive to the measurement times and other cost factors, the concentric plot type was optimal in almost all studied cases. Subsample tree measurement strategies need further studies, as they were an important cost factor. However, their importance to the precision was not as clear. Keywords: Sample, Plot, Forest inventory, Measurement, Cost, Loss

  15. Ground-Tracking With a Forked Tongue

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    Scientists since Aristotle’s day have wondered why the tongues of snakes and many lizards——are forked, a trait that dates from at least the Cretaceous,more than 65 million years ago.Now Kurt Schwenk,a University of Connecticut evolutionary biologist, thinks he knows the answer. "It gives them the abil-

  16. The Navigation Potential of Ground Feature Tracking

    Science.gov (United States)

    2009-09-01

    500 0 500 1000 Z ( m ) Time (sec) Figure B.8: Scenario 1. Kalman Filter True vs Estimated Position Parameters. Red is +− standart deviation. Blue... standart deviation. Blue - true, green -estimated. 82 0 20 40 60 80 100 −500 0 500 Kalman Filter Position Error (Est − True) X er r ( m ) 0 20 40 60 80 100...true. Red is +− standart deviation. 0 20 40 60 80 100 −200 0 200 400 Kalman Filter Velocity Error (Est − True) V x e rr ( m ) 0 20 40 60 80 100 −100

  17. Charm Dalitz Plot Analysis Formalism and Results

    CERN Document Server

    Asner, David M

    2004-01-01

    Charm meson decay dynamics have been studied extensively over the last decade. We describe the Dalitz-plot analysis technique which has been applied by many experiments to three-body D0, D+ and Ds decays. We discuss experimental results from Mark II, Mark III, E687, E691, ARGUS, E791, FOCUS, CLEO and BABAR. These studies probe a variety of physics including doubly-Cabibbo suppressed decays, searches for CP violation, the properties of established light mesons and the properties of pipi and Kpi S-wave states.

  18. Optimal plot design in a multipurpose forest inventory

    Institute of Scientific and Technical Information of China (English)

    Helena M Henttonen; Annika Kangas

    2016-01-01

    Background:We explore the factors affecting the optimal plot design (size and type as well as the subsample tree selection strategies within a plot) and their relative importance in defining the optimal plot design in amultipurpose forest inventory. The factors include time used to lay out the plot and to make the tree measurements within the plot, the between-plot variation of each of the variables of interest in the area, and the measurement and model errors for the different variables. Methods:We simulate different plot types and sizes and subsample tree selection strategies on measuredtest areas from North Lapland. The plot types used are fixed-radius, concentric and relascope plots. Weselect the optimal type and size first at plot level using a cost-plus-loss approach and then at cluster level byminimizing the weighted standard error with fixed budget. Results:As relascope plots are very efficient at the plot level for volume and basal area, and fixed-radius plots for stems per ha, the optimal plot type strongly depends on the relative importance of these variables. The concentric plot seems to be a good compromise between these two in many cases. The subsample tree selection strategy was more important in selecting optimal plot than many other factors. In cluster level, the most important factor is the transfer time between plots. Conclusions:While the optimal radius of plots and other parameters were sensitive to the measurement times and other cost factors, the concentric plot type was optimal in almost al studied cases. Subsample tree measurement strategies need further studies, as they were an important cost factor. However, their importance to the precision was not as clear.

  19. Construction of an experimental plot seeder of wheat planting and compare it by imported one

    Directory of Open Access Journals (Sweden)

    I Eskandari

    2016-09-01

    Full Text Available Introduction Researchers frequently include multiple cultivars and fertility levels in field experiments. Therefore, the experiments sowing operation must represent a considerable saving in time and labor, compared to hand sowing. Greater flexibility in experimental design and setup could be achieved by equipment that enables quick changes in the cultivar and fertilizer rates from one plot to the next. A satisfactory seed drill must distribute a given quantity of seed evenly over a predetermined length of coulter row, the coulters must be spaced at exact intervals and depth of sowing must be uniform. In a self-propelled type of plot seeder, no coulter should run in a wheel track as the compaction of the soil can cause observable differences in vigor between plants in such a row and those in un-compacted rows. The machine should sow in succession from a try in which a series of seed pocket separated clearly and must be put into distributer funnel by an assistant operator. The length of gap being varied according to the nature and purpose of the plot. The objectives of this experiment were 1- to design and construct a local self-propelled plot seeder and 2- To compare it with the imported (Wintersteiger plot seeder in cereal breeding programs. Materials and Methods A small-plot seeder was designed and constructed to meet this objective. The unit consists of the following basic components: a toolbar for pulling a set of six blade coulter, an air compressor for lifting and putting down the openers and metering transmission drive wheel, an operators chair and work rack, one belt seed distribution. A cone-celled and rotor seed distributor is used for seed distribution to the openers. The cone system is connected to the gearbox and allows for great flexibility in changing cultivars, crop species, and plot length. This is driven by the separate drive wheel. The cone-celled distributor sows all the seed of the sample in making one complete turn. The

  20. Construction of an experimental plot seeder of wheat planting and compare it by imported one

    Directory of Open Access Journals (Sweden)

    I Eskandari

    2016-09-01

    Full Text Available Introduction Researchers frequently include multiple cultivars and fertility levels in field experiments. Therefore, the experiments sowing operation must represent a considerable saving in time and labor, compared to hand sowing. Greater flexibility in experimental design and setup could be achieved by equipment that enables quick changes in the cultivar and fertilizer rates from one plot to the next. A satisfactory seed drill must distribute a given quantity of seed evenly over a predetermined length of coulter row, the coulters must be spaced at exact intervals and depth of sowing must be uniform. In a self-propelled type of plot seeder, no coulter should run in a wheel track as the compaction of the soil can cause observable differences in vigor between plants in such a row and those in un-compacted rows. The machine should sow in succession from a try in which a series of seed pocket separated clearly and must be put into distributer funnel by an assistant operator. The length of gap being varied according to the nature and purpose of the plot. The objectives of this experiment were 1- to design and construct a local self-propelled plot seeder and 2- To compare it with the imported (Wintersteiger plot seeder in cereal breeding programs. Materials and Methods A small-plot seeder was designed and constructed to meet this objective. The unit consists of the following basic components: a toolbar for pulling a set of six blade coulter, an air compressor for lifting and putting down the openers and metering transmission drive wheel, an operators chair and work rack, one belt seed distribution. A cone-celled and rotor seed distributor is used for seed distribution to the openers. The cone system is connected to the gearbox and allows for great flexibility in changing cultivars, crop species, and plot length. This is driven by the separate drive wheel. The cone-celled distributor sows all the seed of the sample in making one complete turn. The

  1. The Use of Crow-AMSAA Plots to Assess Mishap Trends

    Science.gov (United States)

    Dawson, Jeffrey W.

    2011-01-01

    Crow-AMSAA (CA) plots are used to model reliability growth. Use of CA plots has expanded into other areas, such as tracking events of interest to management, maintenance problems, and safety mishaps. Safety mishaps can often be successfully modeled using a Poisson probability distribution. CA plots show a Poisson process in log-log space. If the safety mishaps are a stable homogenous Poisson process, a linear fit to the points in a CA plot will have a slope of one. Slopes of greater than one indicate a nonhomogenous Poisson process, with increasing occurrence. Slopes of less than one indicate a nonhomogenous Poisson process, with decreasing occurrence. Changes in slope, known as "cusps," indicate a change in process, which could be an improvement or a degradation. After presenting the CA conceptual framework, examples are given of trending slips, trips and falls, and ergonomic incidents at NASA (from Agency-level data). Crow-AMSAA plotting is a robust tool for trending safety mishaps that can provide insight into safety performance over time.

  2. Brains striving for coherence: Long-term cumulative plot formation in the default mode network.

    Science.gov (United States)

    Tylén, K; Christensen, P; Roepstorff, A; Lund, T; Østergaard, S; Donald, M

    2015-11-01

    Many everyday activities, such as engaging in conversation or listening to a story, require us to sustain attention over a prolonged period of time while integrating and synthesizing complex episodic content into a coherent mental model. Humans are remarkably capable of navigating and keeping track of all the parallel social activities of everyday life even when confronted with interruptions or changes in the environment. However, the underlying cognitive and neurocognitive mechanisms of such long-term integration and profiling of information remain a challenge to neuroscience. While brain activity is generally traceable within the short time frame of working memory (milliseconds to seconds), these integrative processes last for minutes, hours or even days. Here we report two experiments on story comprehension. Experiment I establishes a cognitive dissociation between our comprehension of plot and incidental facts in narratives: when episodic material allows for long-term integration in a coherent plot, we recall fewer factual details. However, when plot formation is challenged, we pay more attention to incidental facts. Experiment II investigates the neural underpinnings of plot formation. Results suggest a central role for the brain's default mode network related to comprehension of coherent narratives while incoherent episodes rather activate the frontoparietal control network. Moreover, an analysis of cortical activity as a function of the cumulative integration of narrative material into a coherent story reveals to linear modulations of right hemisphere posterior temporal and parietal regions. Together these findings point to key neural mechanisms involved in the fundamental human capacity for cumulative plot formation.

  3. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

    Directory of Open Access Journals (Sweden)

    Jessica Hullman

    Full Text Available Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs, that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

  4. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering

    Science.gov (United States)

    Hullman, Jessica; Resnick, Paul; Adar, Eytan

    2015-01-01

    Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity. PMID:26571487

  5. Macroecology of Australian Tall Eucalypt Forests: Baseline Data from a Continental-Scale Permanent Plot Network.

    Science.gov (United States)

    Wood, Sam W; Prior, Lynda D; Stephens, Helen C; Bowman, David M J S

    2015-01-01

    Tracking the response of forest ecosystems to climate change demands large (≥1 ha) monitoring plots that are repeatedly measured over long time frames and arranged across macro-ecological gradients. Continental scale networks of permanent forest plots have identified links between climate and carbon fluxes by monitoring trends in tree growth, mortality and recruitment. The relationship between tree growth and climate in Australia has been recently articulated through analysis of data from smaller forest plots, but conclusions were limited by (a) absence of data on recruitment and mortality, (b) exclusion of non-eucalypt species, and (c) lack of knowledge of stand age or disturbance histories. To remedy these gaps we established the Ausplots Forest Monitoring Network: a continental scale network of 48 1 ha permanent plots in highly productive tall eucalypt forests in the mature growth stage. These plots are distributed across cool temperate, Mediterranean, subtropical and tropical climates (mean annual precipitation 850 to 1900 mm per year; mean annual temperature 6 to 21°C). Aboveground carbon stocks (AGC) in these forests are dominated by eucalypts (90% of AGC) whilst non-eucalypts in the understorey dominated species diversity and tree abundance (84% of species; 60% of stems). Aboveground carbon stocks were negatively related to mean annual temperature, with forests at the warm end of the temperature range storing approximately half the amount of carbon as forests at the cool end of the temperature range. This may reflect thermal constraints on tree growth detected through other plot networks and physiological studies. Through common protocols and careful sampling design, the Ausplots Forest Monitoring Network will facilitate the integration of tall eucalypt forests into established global forest monitoring initiatives. In the context of projections of rapidly warming and drying climates in Australia, this plot network will enable detection of links between

  6. A Plot Story:The Ransom of Red Chief

    Institute of Scientific and Technical Information of China (English)

    WANG Si-yu

    2015-01-01

    The Ransom of Red Chief is a short story written by O · Henry. Some critics regard it as a plot story but some do not. A typical plot story should focus on the plot:using techniques such as flashback or foreshadowing to unfold the plot and containing exposition, complication, climax, resolution, conclusion to rich the plot. The main characters are presented with internal and ex⁃ternal conflicts as well. In this thesis, a detailed analysis will be presented to prove that this story is really a plot story.

  7. Prediction of Ground Vibration from Freight Trains

    Science.gov (United States)

    Jones, C. J. C.; Block, J. R.

    1996-05-01

    Heavy freight trains emit ground vibration with predominant frequency components in the range 4-30 Hz. If the amplitude is sufficient, this may be felt by lineside residents, giving rise to disturbance and concern over possible damage to their property. In order to establish the influence of parameters of the track and rolling stock and thereby enable the design of a low vibration railway, a theoretical model of both the generation and propagation of vibration is required. The vibration is generated as a combination of the effects of dynamic forces, due to the unevenness of the track, and the effects of the track deformation under successive axle loads. A prediction scheme, which combines these effects, has been produced. A vehicle model is used to predict the dynamic forces at the wheels. This includes the non-linear effects of friction damped suspensions. The loaded track profile is measured by using a track recording coach. The dynamic loading and the effects of the moving axles are combined in a track response model. The predicted track vibration is compared to measurements. The transfer functions from the track to a point in the ground can be calculated by using a coupled track and a three-dimensional layered ground model. The propagation effects of the ground layers are important but the computation of the transfer function from each sleeper, which would be required for a phase coherent summation of the vibration in the ground, would be prohibitive. A compromise summation is used and results are compared with measurements.

  8. Heterogeneous Molecular Catalysis of Electrochemical Reactions: Volcano Plots and Catalytic Tafel Plots.

    Science.gov (United States)

    Costentin, Cyrille; Savéant, Jean-Michel

    2017-06-14

    We analyze here, in the framework of heterogeneous molecular catalysis, the reasons for the occurrence or nonoccurrence of volcanoes upon plotting the kinetics of the catalytic reaction versus the stabilization free energy of the primary intermediate of the catalytic process. As in the case of homogeneous molecular catalysis or catalysis by surface-active metallic sites, a strong motivation of such studies relates to modern energy challenges, particularly those involving small molecules, such as water, hydrogen, oxygen, proton, and carbon dioxide. This motivation is particularly pertinent for what concerns heterogeneous molecular catalysis, since it is commonly preferred to homogeneous molecular catalysis by the same molecules if only for chemical separation purposes and electrolytic cell architecture. As with the two other catalysis modes, the main drawback of the volcano plot approach is the basic assumption that the kinetic responses depend on a single descriptor, viz., the stabilization free energy of the primary intermediate. More comprehensive approaches, investigating the responses to the maximal number of experimental factors, and conveniently expressed as catalytic Tafel plots, should clearly be preferred. This is more so in the case of heterogeneous molecular catalysis in that additional transport factors in the supporting film may additionally affect the current-potential responses. This is attested by the noteworthy presence of maxima in catalytic Tafel plots as well as their dependence upon the cyclic voltammetric scan rate.

  9. Generalized confidence interval plots using commands or dialogs

    OpenAIRE

    Roger Newson

    2005-01-01

    Confidence intervals may be presented as publication-ready tables or as presentation-ready plots. -eclplot- produces plots of estimates and confidence intervals. It inputs a dataset (or resultsset) with one observation per parameter and variables containing estimates, lower and upper confidence limits, and a fourth variable, against which the confidence intervals are plotted. This resultsset can be used for producing both plots and tables, and may be generated using a spreadsheet or using -st...

  10. When does the mean excess plot look linear?

    CERN Document Server

    Ghosh, Souvik

    2010-01-01

    In risk analysis, the mean excess plot is a commonly used exploratory plotting technique for confirming iid data is consistent with a generalized Pareto assumption for the underlying distribution, since in the presence of such a distribution thresholded data have a mean excess plot that is roughly linear. Does any other class of distributions share this linearity of the plot? Under some extra assumptions, we are able to conclude that only the generalized Pareto family has this property.

  11. Worm plot to diagnose fit in quantile regression

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how the

  12. Worm plot to diagnose fit in quantile regression

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how

  13. Worm plot to diagnose fit in quantile regression

    NARCIS (Netherlands)

    Buuren, S. van

    2007-01-01

    The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how the

  14. Parametric-Studies and Data-Plotting Modules for the SOAP

    Science.gov (United States)

    2008-01-01

    "Parametric Studies" and "Data Table Plot View" are the names of software modules in the Satellite Orbit Analysis Program (SOAP). Parametric Studies enables parameterization of as many as three satellite or ground-station attributes across a range of values and computes the average, minimum, and maximum of a specified metric, the revisit time, or 21 other functions at each point in the parameter space. This computation produces a one-, two-, or three-dimensional table of data representing statistical results across the parameter space. Inasmuch as the output of a parametric study in three dimensions can be a very large data set, visualization is a paramount means of discovering trends in the data (see figure). Data Table Plot View enables visualization of the data table created by Parametric Studies or by another data source: this module quickly generates a display of the data in the form of a rotatable three-dimensional-appearing plot, making it unnecessary to load the SOAP output data into a separate plotting program. The rotatable three-dimensionalappearing plot makes it easy to determine which points in the parameter space are most desirable. Both modules provide intuitive user interfaces for ease of use.

  15. Density Distribution Sunflower Plots in Stata Version 8

    OpenAIRE

    Dupont, William D

    2004-01-01

    Density distribution sunflower plots are used to display high-density bivariate data. They are useful for data where a conventional scatter plot is difficult to read due to overstriking of the plot symbol. The x-y plane is subdivided into a lattice of regular hexagonal bins of width w specified by the user. The user also specifies the values of l, d, and k that affect the plot as follows. Individual observations are plotted when there are less than l observations per bin as in a conventional ...

  16. Unscented Kalman filtering for articulated human tracking

    DEFF Research Database (Denmark)

    Boesen Lindbo Larsen, Anders; Hauberg, Søren; Pedersen, Kim Steenstrup

    2011-01-01

    We present an articulated tracking system working with data from a single narrow baseline stereo camera. The use of stereo data allows for some depth disambiguation, a common issue in articulated tracking, which in turn yields likelihoods that are practically unimodal. While current state...... with superior results. Tracking quality is measured by comparing with ground truth data from a marker-based motion capture system....

  17. Development of plotting position for the general extreme value distribution

    Science.gov (United States)

    Kim, Sooyoung; Shin, Hongjoon; Joo, Kyoungwon; Heo, Jun-Haeng

    2012-12-01

    SummaryProbability plotting positions are used to graphically display the annual maximum rainfall or flood and to estimate the exceedance probabilities of those values. Therefore, the graphical approach using plotting positions has been applied in many hydrology and water resource engineering fields. The definition of unbiased plotting positions by Cunnane (1978) as the mean of the order statistics from reduced variates has influenced researchers to develop the plotting position of the probability distribution containing shape parameters. In this study, the plotting position formula for the general extreme value (GEV) distribution was derived by using the theoretical reduced variates of the GEV distribution for various sample sizes and shape parameters. To choose an appropriate plotting position formula, we examined eight plotting position formula types containing coefficients of skewness or squared coefficients of skewness in the numerator and/or denominator. In addition, the parameters of the plotting position formula for the GEV distribution were estimated by using a genetic optimization method known as the real-coded genetic algorithm (RGA). The accuracy of the derived plotting position formula for the GEV distribution was examined on the basis of the root mean square errors and relative bias between the theoretical reduced variates and those calculated from the derived and existing plotting position formulas. The derived plotting formula was found to be useful if the range of the shape parameter was within ±0.2.

  18. iCanPlot: visual exploration of high-throughput omics data using interactive Canvas plotting.

    Directory of Open Access Journals (Sweden)

    Amit U Sinha

    Full Text Available Increasing use of high throughput genomic scale assays requires effective visualization and analysis techniques to facilitate data interpretation. Moreover, existing tools often require programming skills, which discourages bench scientists from examining their own data. We have created iCanPlot, a compelling platform for visual data exploration based on the latest technologies. Using the recently adopted HTML5 Canvas element, we have developed a highly interactive tool to visualize tabular data and identify interesting patterns in an intuitive fashion without the need of any specialized computing skills. A module for geneset overlap analysis has been implemented on the Google App Engine platform: when the user selects a region of interest in the plot, the genes in the region are analyzed on the fly. The visualization and analysis are amalgamated for a seamless experience. Further, users can easily upload their data for analysis--which also makes it simple to share the analysis with collaborators. We illustrate the power of iCanPlot by showing an example of how it can be used to interpret histone modifications in the context of gene expression.

  19. Chaos Analysis of Discharge Current Based on Tracking Test of Phenolic Resin

    Institute of Scientific and Technical Information of China (English)

    DU Boxue; ZHENG Xiaolei; DONG Dianshuai

    2009-01-01

    In tracking test,discharge is a complicated process and comparative tracking index(CTI)has wide variation.To evaluate tracking resistance,the chaos analysis of discharge current is presented based on the tracking test ofphenolic resin in accordance with IEC601 12.According to the characteristics of statistical self-similarity and complexity of discharge current,the largest Lyapunov exponent is calculated,and the 2-dimensional attractor ofdischarge current is reconstructed.Moreover,the attractors of discharge current and recurrence plots of different discharge states are reconstructed.The results indicate that the chaos attractors have different characteristics in evolutionary tracks,the topological structure and grain direction of recurrence plots show significant differences.The chaos attractor can describe the tracking process,the recurrence plot can identify the tracking state clearly,while its arithmetic is simple.

  20. GPS Metric Tracking Unit

    Science.gov (United States)

    2008-01-01

    As Global Positioning Satellite (GPS) applications become more prevalent for land- and air-based vehicles, GPS applications for space vehicles will also increase. The Applied Technology Directorate of Kennedy Space Center (KSC) has developed a lightweight, low-cost GPS Metric Tracking Unit (GMTU), the first of two steps in developing a lightweight, low-cost Space-Based Tracking and Command Subsystem (STACS) designed to meet Range Safety's link margin and latency requirements for vehicle command and telemetry data. The goals of STACS are to improve Range Safety operations and expand tracking capabilities for space vehicles. STACS will track the vehicle, receive commands, and send telemetry data through the space-based asset, which will dramatically reduce dependence on ground-based assets. The other step was the Low-Cost Tracking and Data Relay Satellite System (TDRSS) Transceiver (LCT2), developed by the Wallops Flight Facility (WFF), which allows the vehicle to communicate with a geosynchronous relay satellite. Although the GMTU and LCT2 were independently implemented and tested, the design collaboration of KSC and WFF engineers allowed GMTU and LCT2 to be integrated into one enclosure, leading to the final STACS. In operation, GMTU needs only a radio frequency (RF) input from a GPS antenna and outputs position and velocity data to the vehicle through a serial or pulse code modulation (PCM) interface. GMTU includes one commercial GPS receiver board and a custom board, the Command and Telemetry Processor (CTP) developed by KSC. The CTP design is based on a field-programmable gate array (FPGA) with embedded processors to support GPS functions.

  1. Grounded theory.

    Science.gov (United States)

    Harris, Tina

    2015-04-29

    Grounded theory is a popular research approach in health care and the social sciences. This article provides a description of grounded theory methodology and its key components, using examples from published studies to demonstrate practical application. It aims to demystify grounded theory for novice nurse researchers, by explaining what it is, when to use it, why they would want to use it and how to use it. It should enable nurse researchers to decide if grounded theory is an appropriate approach for their research, and to determine the quality of any grounded theory research they read.

  2. Split-plot designs for robotic serial dilution assays.

    Science.gov (United States)

    Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

    2011-12-01

    This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs.

  3. Cross recurrence plot based synchronization of time series

    OpenAIRE

    N. Marwan; Thiel, M.; Nowaczyk, N. R.

    2002-01-01

    The method of recurrence plots is extended to the cross recurrence plots (CRP) which, among others, enables the study of synchronization or time differences in two time series. This is emphasized in a distorted main diagonal in the cross recurrence plot, the line of synchronization (LOS). A non-parametrical fit of this LOS can be used to rescale the time axis of the two data series (whereby one of them is compressed or stretched) so ...

  4. Recurrence plot statistics and the effect of embedding

    OpenAIRE

    March, T. K.; Chapman, S. C.; Dendy, R.O.

    2005-01-01

    Recurrence plots provide a graphical representation of the recurrent patterns in a timeseries, the quantification of which is a relatively new field. Here we derive analytical expressions which relate the values of key statistics, notably determinism and entropy of line length distribution, to the correlation sum as a function of embedding dimension. These expressions are obtained by deriving the transformation which generates an embedded recurrence plot from an unembedded plot. A single unem...

  5. Phase Plots of Complex Functions: a Journey in Illustration

    CERN Document Server

    Wegert, Elias

    2010-01-01

    We propose to visualize complex (meromorphic) functions $f$ by their phase $P_f:=f/|f|$. Color--coding the points on the unit circle converts the function $P_f$ to an image (the phase plot of $f$), which represents the function directly on its domain. We discuss how special properties of $f$ are reflected by their phase plots and indicate several applications. In particular we reformulate a universality theorem for Riemann's Zeta function in the language of phase plots.

  6. Ultrasonic beam-plotting with very small spheres.

    Science.gov (United States)

    Round, W H; Swan, H

    1991-12-01

    A method of pulse-echo ultrasonic beam plotting is described. It differs from traditional pulse-echo beam plotting in that the ultrasonic pulses are scattered off a totally isolated sphere rather than a sphere suspended on a wire. The method also allows extremely small spheres to be used thus providing greater resolution. It is demonstrated that pulse-echo beam plotting using spheres of different size produces different iso-echo amplitude curves.

  7. Coarse-graining time series data: Recurrence plot of recurrence plots and its application for music.

    Science.gov (United States)

    Fukino, Miwa; Hirata, Yoshito; Aihara, Kazuyuki

    2016-02-01

    We propose a nonlinear time series method for characterizing two layers of regularity simultaneously. The key of the method is using the recurrence plots hierarchically, which allows us to preserve the underlying regularities behind the original time series. We demonstrate the proposed method with musical data. The proposed method enables us to visualize both the local and the global musical regularities or two different features at the same time. Furthermore, the determinism scores imply that the proposed method may be useful for analyzing emotional response to the music.

  8. Coarse-graining time series data: Recurrence plot of recurrence plots and its application for music

    Science.gov (United States)

    Fukino, Miwa; Hirata, Yoshito; Aihara, Kazuyuki

    2016-02-01

    We propose a nonlinear time series method for characterizing two layers of regularity simultaneously. The key of the method is using the recurrence plots hierarchically, which allows us to preserve the underlying regularities behind the original time series. We demonstrate the proposed method with musical data. The proposed method enables us to visualize both the local and the global musical regularities or two different features at the same time. Furthermore, the determinism scores imply that the proposed method may be useful for analyzing emotional response to the music.

  9. 试论修辞谋划%On Rhetorical Plot

    Institute of Scientific and Technical Information of China (English)

    江结宝

    2015-01-01

    Rhetorical plot is the overall design,scheme and specification. It can be divided into macro⁃scopic plot,medium plot and microscopic plot,with different types of general plot and special plot.. Rhetori⁃cal plot is the beginning of rhetorical process running through the whole rhetoric process. Rhetoric should pay attention to research of rhetoric plot. Rhetoric plot is different from rhetorical strategy.%修辞谋划是对修辞行为的整体设计、谋定和规约。修辞谋划可分为宏观谋划、中观谋划和微观谋划三个层次,包括一般谋划和特殊谋划两大类型。修辞谋划是修辞过程的起点,并贯穿整个修辞过程,修辞学应该重视修辞谋划的研究。修辞谋划不同于一般所说的“修辞策略”。

  10. Tracking Porters

    DEFF Research Database (Denmark)

    Bruun, Maja Hojer; Krause-Jensen, Jakob; Saltofte, Margit

    2015-01-01

    Anthropology attempts to gain insight into people's experiential life-worlds through long-term fieldwork. The quality of anthropological knowledge production, however, does not depend solely on the duration of the stay in the field, but also on a particular way of seeing social situations. The an...... the students followed the work of a group of porters. Drawing on anthropological concepts and research strategies the students gained crucial insights about the potential effects of using tracking technologies in the hospital....

  11. Grounded cognition.

    Science.gov (United States)

    Barsalou, Lawrence W

    2008-01-01

    Grounded cognition rejects traditional views that cognition is computation on amodal symbols in a modular system, independent of the brain's modal systems for perception, action, and introspection. Instead, grounded cognition proposes that modal simulations, bodily states, and situated action underlie cognition. Accumulating behavioral and neural evidence supporting this view is reviewed from research on perception, memory, knowledge, language, thought, social cognition, and development. Theories of grounded cognition are also reviewed, as are origins of the area and common misperceptions of it. Theoretical, empirical, and methodological issues are raised whose future treatment is likely to affect the growth and impact of grounded cognition.

  12. Round versus rectangular: Does the plot shape matter?

    Science.gov (United States)

    Iserloh, Thomas; Bäthke, Lars; Ries, Johannes B.

    2016-04-01

    Field rainfall simulators are designed to study soil erosion processes and provide urgently needed data for various geomorphological, hydrological and pedological issues. Due to the different conditions and technologies applied, there are several methodological aspects under review of the scientific community, particularly concerning design, procedures and conditions of measurement for infiltration, runoff and soil erosion. Extensive discussions at the Rainfall Simulator Workshop 2011 in Trier and the Splinter Meeting at EGU 2013 "Rainfall simulation: Big steps forward!" lead to the opinion that the rectangular shape is the more suitable plot shape compared to the round plot. A horizontally edging Gerlach trough is installed for sample collection without forming unnatural necks as is found at round or triangle plots. Since most research groups did and currently do work with round plots at the point scale (<1m²), a precise analysis of the differences between the output of round and square plots are necessary. Our hypotheses are: - Round plot shapes disturb surface runoff, unnatural fluvial dynamics for the given plot size such as pool development especially directly at the plot's outlet occur. - A square plot shape prevent these problems. A first comparison between round and rectangular plots (Iserloh et al., 2015) indicates that the rectangular plot could indeed be the more suitable, but the rather ambiguous results make a more elaborate test setup necessary. The laboratory test setup includes the two plot shapes (round, square), a standardised silty substrate and three inclinations (2°, 6°, 12°). The analysis of the laboratory test provide results on the best performance concerning undisturbed surface runoff and soil/water sampling at the plot's outlet. The analysis of the plot shape concerning its influence on runoff and erosion shows that clear methodological standards are necessary in order to make rainfall simulation experiments comparable. Reference

  13. A Guided Inquiry on Hubble Plots and the Big Bang

    Science.gov (United States)

    Forringer, Ted

    2014-01-01

    In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the…

  14. Development of gnuplot plotting package for MAD-X

    CERN Document Server

    Romero Leiro, Freddy Jose

    2015-01-01

    MAD-X is a general purpose software for charged-particle optics design and it needs a visualisation tool to be able to show the data in a more manageable way, this visualisation tools being already in MAD-X are the PLOT and SETPLOT commands. Nonetheless issues like compatibility and the desire of having alternative ways to show the plots in a more portable way have lead to explore the use of open source available software to reproduce the same results. The purpose of this project is to create a package compatible with the MAD-X output format, capable of generating publication quality plots, mainly lattice beamline plots and scatter plots by using the Gnuplot for creating plots. This software must support the same options as the PLOT and SETPLOT commands from MAD-X but additions or improvement over the present version are more than welcome. The main purpose of the program is to pre-process the data in order to be ready for Gnuplot to read it and plot it .This report is mostly a description of the development o...

  15. Conceptual recurrence plots: revealing patterns in human discourse.

    Science.gov (United States)

    Angus, Daniel; Smith, Andrew; Wiles, Janet

    2012-06-01

    Human discourse contains a rich mixture of conceptual information. Visualization of the global and local patterns within this data stream is a complex and challenging problem. Recurrence plots are an information visualization technique that can reveal trends and features in complex time series data. The recurrence plot technique works by measuring the similarity of points in a time series to all other points in the same time series and plotting the results in two dimensions. Previous studies have applied recurrence plotting techniques to textual data; however, these approaches plot recurrence using term-based similarity rather than conceptual similarity of the text. We introduce conceptual recurrence plots, which use a model of language to measure similarity between pairs of text utterances, and the similarity of all utterances is measured and displayed. In this paper, we explore how the descriptive power of the recurrence plotting technique can be used to discover patterns of interaction across a series of conversation transcripts. The results suggest that the conceptual recurrence plotting technique is a useful tool for exploring the structure of human discourse.

  16. Recurrence plots from altimetry data of some lakes in Africa

    CERN Document Server

    Sparavigna, Amelia Carolina

    2014-01-01

    The paper shows recurrence plots obtained from time series of the level variations of four lakes in Africa (Nasser, Tana, Chad and Kainji). The data, coming from remote sensing, are provided by the United States Department of Agriculture. The recurrence plots allow a good visual comparison of the behaviours of local drainage basins.

  17. A Guided Inquiry on Hubble Plots and the Big Bang

    Science.gov (United States)

    Forringer, Ted

    2014-01-01

    In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the…

  18. Instrumentation for full-year plot-scale runoff monitoring

    Science.gov (United States)

    Replicated 0.34 ha cropping systems plots have been in place since 1991 at the USDA-ARS Goodwater Creek Experimental Watershed in central Missouri. Recently, instrumentation has been installed at 18 of those plots for continuous runoff water quality and quantity monitoring. That installation require...

  19. Precise FIA plot registration using field and dense LIDAR data

    Science.gov (United States)

    Demetrios Gatziolis

    2009-01-01

    Precise registration of forest inventory and analysis (FIA) plots is a prerequisite for an effective fusion of field data with ancillary spatial information, which is an approach commonly employed in the mapping of various forest parameters. Although the adoption of Global Positioning System technology has improved the precision of plot coordinates obtained during...

  20. Weak limits for exploratory plots in the analysis of extremes

    CERN Document Server

    Das, Bikramjit

    2010-01-01

    Exploratory plotting tools have been devised aplenty in order to diagnose the goodness-of-fit of data sets to a hypothesized distribution. Some of them have found extensive use in diverse areas of finance, telecommunication, environmental science, etc. in order to detect sub-exponential or heavy-tailed behavior in observed data. In this paper we concentrate on two such plotting methodologies: the Quantile-Quantile plots for heavy-tails and the Mean Excess plots. Under the assumption of heavy-tailed behavior of the underlying sample the convergence in probability of these plots to a fixed set in a suitable topology of closed sets of $\\R^2$ has been studied in \\cite{das:resnick:2008} and \\cite{ghosh:resnick:2009}. These results give theoretical justifications for using the plots to test the null hypothesis that the underlying distribution is heavy-tailed by checking if the observed plot is ``close'' to the limit under the null hypothesis. In practice though one set of observations would lead to only one plot of...

  1. Split-plot fractional designs: Is minimum aberration enough?

    DEFF Research Database (Denmark)

    Kulahci, Murat; Ramirez, Jose; Tobias, Randy

    2006-01-01

    Split-plot experiments are commonly used in industry for product and process improvement. Recent articles on designing split-plot experiments concentrate on minimum aberration as the design criterion. Minimum aberration has been criticized as a design criterion for completely randomized fractional...... factorial design and alternative criteria, such as the maximum number of clear two-factor interactions, are suggested (Wu and Hamada (2000)). The need for alternatives to minimum aberration is even more acute for split-plot designs. In a standard split-plot design, there are several types of two...... for completely randomized designs. Consequently, we provide a modified version of the maximum number of clear two-factor interactions design criterion to be used for split-plot designs....

  2. Superplot: Graphical interface for plotting and analyzing data

    Science.gov (United States)

    Fowlie, Andrew; Bardsley, Michael Hugh

    2016-12-01

    Superplot calculates and plots statistical quantities relevant to parameter inference from a "chain" of samples drawn from a parameter space produced by codes such as MultiNest (ascl:1109.006), BAYES-X (ascl:1505.027), and PolyChord (ascl:1502.011). It offers a graphical interface for browsing a chain of many variables quickly and can produce numerous kinds of publication quality plots, including one- and two-dimensional profile likelihood, three-dimensional scatter plots, and confidence intervals and credible regions. Superplot can also save plots in PDF format, create a summary text file, and export a plot as a pickled object for importing and manipulating in a Python interpreter.

  3. Split-plot fractional designs: Is minimum aberration enough?

    DEFF Research Database (Denmark)

    Kulahci, Murat; Ramirez, Jose; Tobias, Randy

    2006-01-01

    Split-plot experiments are commonly used in industry for product and process improvement. Recent articles on designing split-plot experiments concentrate on minimum aberration as the design criterion. Minimum aberration has been criticized as a design criterion for completely randomized fractional...... factorial design and alternative criteria, such as the maximum number of clear two-factor interactions, are suggested (Wu and Hamada (2000)). The need for alternatives to minimum aberration is even more acute for split-plot designs. In a standard split-plot design, there are several types of two...... for completely randomized designs. Consequently, we provide a modified version of the maximum number of clear two-factor interactions design criterion to be used for split-plot designs....

  4. Chaos Existence in Surface Discharge of Tracking Test

    Institute of Scientific and Technical Information of China (English)

    DU Boxue; DONG Dianshuai; ZHENG Xiaolei

    2009-01-01

    Tracking tests for different polymer materials were carried out to investigate the chaotic behavior of surface discharge.The discharge sequences measured during the discharge process were analyzed for finding the evidence of chaos existence.Four kinds of nonlinear analysis methods were adopted:estimating the largest Lyapunov exponent,calculating the fractal dimension with increasing the embedding dimension,drawing the recurrence plots,and plotting the Poincare maps.It is found that the largest Lyapunov exponent of the discharge is positive,and the plot of fractal dimension,as a function of embedding dimension,will saturate at a value.The recurrence plots show the chaotic frame-work patterns,and the Poincare maps also have the chaotic characteristics.The results indicate that the chaotic behavior does exist in the discharge currents of the tracking test.

  5. NASA's GPS tracking system for Aristoteles

    Science.gov (United States)

    Davis, E. S.; Hajj, G.; Kursinski, E. R.; Kyriacou, C.; Meehan, T. K.; Melbourne, William G.; Neilan, R. E.; Young, L. E.; Yunck, Thomas P.

    1991-12-01

    NASA 's Global Positioning System (GPS) tracking system for Artistoteles receivers and a GPS flight receiver aboard Aristoteles is described. It will include a global network of GPS ground receivers and a GPS flight receiver aboard Aristoteles. The flight receiver will operate autonomously; it will provide real time navigation solutions for Aristoteles and tracking data needed by ESOC for operational control of the satellite. The GPS flight and ground receivers will currently and continuously track all visible GPS satellites. These observations will yield high accuracy differential positions and velocities of Aristoteles in a terrestrial frame defined by the locations of the globally distributed ground work. The precise orbits and tracking data will be made available to science investigators as part of the geophysical data record. The characteristics of the GPS receivers, both flight and ground based, that NASA will be using to support Aristoteles are described. The operational aspects of the overall tracking system, including the data functions and the resulting data products are summarized. The expected performance of the tracking system is compared to Aristoteles requirements and the need to control key error sources such as multipath is identified.

  6. Native plant recovery in study plots after fennel (Foeniculum vulgare) control on Santa Cruz Island

    Science.gov (United States)

    Power, Paula; Stanley, Thomas R.; Cowan, Clark; Robertson, James R.

    2014-01-01

    Santa Cruz Island is the largest of the California Channel Islands and supports a diverse and unique flora which includes 9 federally listed species. Sheep, cattle, and pigs, introduced to the island in the mid-1800s, disturbed the soil, browsed native vegetation, and facilitated the spread of exotic invasive plants. Recent removal of introduced herbivores on the island led to the release of invasive fennel (Foeniculum vulgare), which expanded to become the dominant vegetation in some areas and has impeded the recovery of some native plant communities. In 2007, Channel Islands National Park initiated a program to control fennel using triclopyr on the eastern 10% of the island. We established replicate paired plots (seeded and nonseeded) at Scorpion Anchorage and Smugglers Cove, where notably dense fennel infestations (>10% cover) occurred, to evaluate the effectiveness of native seed augmentation following fennel removal. Five years after fennel removal, vegetative cover increased as litter and bare ground cover decreased significantly (P < 0.0001) on both plot types. Vegetation cover of both native and other (nonfennel) exotic species increased at Scorpion Anchorage in both seeded and nonseeded plots. At Smugglers Cove, exotic cover decreased significantly (P = 0.0001) as native cover comprised of Eriogonum arborescensand Leptosyne gigantea increased significantly (P < 0.0001) in seeded plots only. Nonseeded plots at Smugglers Cove were dominated by exotic annual grasses, primarily Avena barbata. The data indicate that seeding with appropriate native seed is a critical step in restoration following fennel control in areas where the native seed bank is depauperate.

  7. Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites

    NARCIS (Netherlands)

    Mitchard, Edward T. A.; Feldpausch, Ted R.; Brienen, Roel J. W.; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R.; Lewis, Simon L.; Lloyd, Jon; Quesada, Carlos A.; Gloor, Manuel; ter Steege, Hans|info:eu-repo/dai/nl/075217120; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragao, Luiz E. O. C.; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I.; Ceron, Carlos E.; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A.; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R. C.; Di Fiore, Anthony; Domingues, Tomas F.; Erwin, Terry L.; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N.; Levis, Carolina; Killeen, Tim J.; Laurance, William F.; Magnusson, William E.; Marimon, Beatriz S.; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T.; Neill, David; Nunez Vargas, Mario P.; Palacios, Walter A.; Parada, Alexander; Pardo Molina, Guido; Pena-Claros, Marielos; Pitman, Nigel; Peres, Carlos A.; Prieto, Adriana; Poorter, Lourens; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H.; Rudas, Agustin; Salomao, Rafael P.; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F.; Steininger, Marc K.; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R.|info:eu-repo/dai/nl/205284868; van der Heijden, Geertje M. F.; Vieira, Ima C. G.; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A.; Wang, Ophelia; Zartman, Charles E.; Malhi, Yadvinder; Phillips, Oliver L.; Cruz, A.P.; Cuenca, W.P.; Espejo, J.E.; Ferreira, L.; Germaine, A.; Penuela, M.C.; Silva, N.; Valenzuela Gamarra, L.

    Aim The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass

  8. Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites

    NARCIS (Netherlands)

    Mitchard, Edward T. A.; Feldpausch, Ted R.; Brienen, Roel J. W.; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R.; Lewis, Simon L.; Lloyd, Jon; Quesada, Carlos A.; Gloor, Manuel; ter Steege, Hans; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragao, Luiz E. O. C.; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I.; Ceron, Carlos E.; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A.; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R. C.; Di Fiore, Anthony; Domingues, Tomas F.; Erwin, Terry L.; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N.; Levis, Carolina; Killeen, Tim J.; Laurance, William F.; Magnusson, William E.; Marimon, Beatriz S.; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T.; Neill, David; Nunez Vargas, Mario P.; Palacios, Walter A.; Parada, Alexander; Pardo Molina, Guido; Pena-Claros, Marielos; Pitman, Nigel; Peres, Carlos A.; Prieto, Adriana; Poorter, Lourens; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H.; Rudas, Agustin; Salomao, Rafael P.; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F.; Steininger, Marc K.; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R.; van der Heijden, Geertje M. F.; Vieira, Ima C. G.; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A.; Wang, Ophelia; Zartman, Charles E.; Malhi, Yadvinder; Phillips, Oliver L.; Cruz, A.P.; Cuenca, W.P.; Espejo, J.E.; Ferreira, L.; Germaine, A.; Penuela, M.C.; Silva, N.; Valenzuela Gamarra, L.

    2014-01-01

    Aim The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass directl

  9. Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites

    NARCIS (Netherlands)

    Mitchard, Edward T. A.; Feldpausch, Ted R.; Brienen, Roel J. W.; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R.; Lewis, Simon L.; Lloyd, Jon; Quesada, Carlos A.; Gloor, Manuel; ter Steege, Hans|info:eu-repo/dai/nl/075217120; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragao, Luiz E. O. C.; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I.; Ceron, Carlos E.; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A.; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R. C.; Di Fiore, Anthony; Domingues, Tomas F.; Erwin, Terry L.; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N.; Levis, Carolina; Killeen, Tim J.; Laurance, William F.; Magnusson, William E.; Marimon, Beatriz S.; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T.; Neill, David; Nunez Vargas, Mario P.; Palacios, Walter A.; Parada, Alexander; Pardo Molina, Guido; Pena-Claros, Marielos; Pitman, Nigel; Peres, Carlos A.; Prieto, Adriana; Poorter, Lourens; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H.; Rudas, Agustin; Salomao, Rafael P.; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F.; Steininger, Marc K.; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R.|info:eu-repo/dai/nl/205284868; van der Heijden, Geertje M. F.; Vieira, Ima C. G.; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A.; Wang, Ophelia; Zartman, Charles E.; Malhi, Yadvinder; Phillips, Oliver L.; Cruz, A.P.; Cuenca, W.P.; Espejo, J.E.; Ferreira, L.; Germaine, A.; Penuela, M.C.; Silva, N.; Valenzuela Gamarra, L.

    2014-01-01

    Aim The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass directl

  10. Tracking telecommuting

    Energy Technology Data Exchange (ETDEWEB)

    Stastny, P.

    2007-03-15

    Many employees are now choosing to work from home using laptops and telephones. Employers in the oil and gas industry are now reaping a number of benefits from their telecommuting employees, including increased productivity; higher levels of employee satisfaction, and less absenteeism. Providing a telecommunication option can prove to be advantageous for employers wishing to hire or retain employees. Telecommuting may also help to reduce greenhouse gas (GHG) emissions. This article provided details of Teletrips Inc., a company that aids in the production of corporate social responsibility reports. Teletrips provides reports that document employee savings in time, vehicle depreciation maintenance, and gasoline costs. Teletrips currently tracks 12 companies in Calgary, and plans to grow through the development of key technology partnerships. The company is also working with the federal government to provide their clients with emission trading credits, and has forged a memorandum of understanding with the British Columbia government for tracking emissions. Calgary now openly supports telecommuting and is encouraging businesses in the city to adopt telecommuting on a larger scale. It was concluded that the expanding needs for road infrastructure and the energy used by cars to move workers in and out of the city are a massive burden to the city's tax base. 1 fig.

  11. INNER TRACKING

    CERN Multimedia

    P. Sharp

    The CMS Inner Tracking Detector continues to make good progress. The Objective for 2006 was to complete all of the CMS Tracker sub-detectors and to start the integration of the sub-detectors into the Tracker Support Tube (TST). The Objective for 2007 is to deliver to CMS a completed, installed, commissioned and calibrated Tracking System (Silicon Strip and Pixels) aligned to < 100µ in April 2008 ready for the first physics collisions at LHC. In November 2006 all of the sub-detectors had been delivered to the Tracker Integration facility (TIF) at CERN and the tests and QA procedures to be carried out on each sub-detector before integration had been established. In December 2006, TIB/TID+ was integrated into TOB+, TIB/TID- was being prepared for integration, and TEC+ was undergoing tests at the final tracker operating temperature (-100 C) in the Lyon cold room. In February 2007, TIB/TID- has been integrated into TOB-, and the installation of the pixel support tube and the services for TI...

  12. Mode S Baseline Radar Tracking.

    Science.gov (United States)

    1982-11-01

    range units and 20 azimuth units) overlaying the position of the beacon reports. In the cases analyzed where beacon reports were not radar reinforced ...82/53 j~ C ~ 7 C _ _ _ _ _ _ 4. Title end Su.btitle 5. Neget at. November 1982 MDDE S BASELINE RADAR TRACKIN4G 6. Poelin Orgeuianti.. Cede ACT-100...Ground Clutter 33 Mode S/ARTS III 100-Scan False Radar Track Summary 74 34 Percent Beacon Radar Reinforcement 77 vii INTRODUCTION PURPOSE. The purpose of

  13. VTM plots as evidence of historical change: Goldmine or landmine?

    Science.gov (United States)

    Keeley, Jon E.

    2004-01-01

    VTM (Vegetation Type Map) plots comprise a huge data set on vegetation composition for many parts of California collected mostly between 1929 and 1935. Historical changes in vegetation have been inferred by sampling these areas many decades later and evaluating the changes in plant dominance. VTM plots can not be precisely relocated, and it has been assumed that errors resulting from this problem are inconsequential or can be eliminated by comparison with a composite of multiple contemporary plots. This study examines that assumption for southern California shrubland landscapes by comparing the differences in species composition between closely positioned VTM-sized plots. Comparing shrub species density in 400-m² plots separated by 30 m (center to center), I found that all species exhibited considerable differences in density even over this short distance. This patchiness in shrub distribution could lead to major errors in historical reconstructions from VTM plot data. Two methods are proposed for dealing with this problem. One is to collect multiple samples from the vicinity of the VTM plot and use the observed spatial variation to set bounds on the temporal changes required to represent significant historical change. The other is to look at broad landscape changes reflected in the averages observed in a large sampling of sites.

  14. CFD Extraction Tool for TecPlot From DPLR Solutions

    Science.gov (United States)

    Norman, David

    2013-01-01

    This invention is a TecPlot macro of a computer program in the TecPlot programming language that processes data from DPLR solutions in TecPlot format. DPLR (Data-Parallel Line Relaxation) is a NASA computational fluid dynamics (CFD) code, and TecPlot is a commercial CFD post-processing tool. The Tec- Plot data is in SI units (same as DPLR output). The invention converts the SI units into British units. The macro modifies the TecPlot data with unit conversions, and adds some extra calculations. After unit conversions, the macro cuts a slice, and adds vectors on the current plot for output format. The macro can also process surface solutions. Existing solutions use manual conversion and superposition. The conversion is complicated because it must be applied to a range of inter-related scalars and vectors to describe a 2D or 3D flow field. It processes the CFD solution to create superposition/comparison of scalars and vectors. The existing manual solution is cumbersome, open to errors, slow, and cannot be inserted into an automated process. This invention is quick and easy to use, and can be inserted into an automated data-processing algorithm.

  15. Evaluation of a Smartphone App for Forest Sample Plot Measurements

    Directory of Open Access Journals (Sweden)

    Mikko Vastaranta

    2015-04-01

    Full Text Available We evaluated a smartphone app (TRESTIMATM for forest sample plot measurements. The app interprets imagery collected from the sample plots using the camera in the smartphone and then estimates forest inventory attributes, including species-specific basal areas (G as well as the diameter (DgM and height (HgM of basal area median trees. The estimates from the smartphone app were compared to forest inventory attributes derived from tree-wise measurements using calipers and a Vertex height measurement device. The data consist of 2169 measured trees from 25 sample plots (32 m × 32 m, dominated by Scots pine and Norway spruce from southern Finland. The root-mean-square errors (RMSEs in the basal area varied from 19.7% to 29.3% and the biases from 11.4% to 18.4% depending on the number of images per sample plot and image shooting location. DgM measurement bias varied from −1.4% to 3.1% and RMSE from 5.2% to 11.6% depending on the tree species. Respectively, HgM bias varied from 5.0% to 8.3% and RMSE 10.0% to 13.6%. In general, four images captured toward the center of the plot provided more accurate results than four images captured away from the plot center. Increasing the number of captured images per plot to the analyses yielded only marginal improvement to the results.

  16. Plot-scale field experiment of surface hydrologic processes with EOS implications

    Science.gov (United States)

    Laymon, Charles A.; Macari, Emir J.; Costes, Nicholas C.

    1992-01-01

    Plot-scale hydrologic field studies were initiated at NASA Marshall Space Flight Center to a) investigate the spatial and temporal variability of surface and subsurface hydrologic processes, particularly as affected by vegetation, and b) develop experimental techniques and associated instrumentation methodology to study hydrologic processes at increasingly large spatial scales. About 150 instruments, most of which are remotely operated, have been installed at the field site to monitor ground atmospheric conditions, precipitation, interception, soil-water status, and energy flux. This paper describes the nature of the field experiment, instrumentation and sampling rationale, and presents preliminary findings.

  17. Using Zoom Technologies to Display HEP Plots and Talks

    Science.gov (United States)

    Watts, G.

    2012-12-01

    Particle physics conferences and experiments generate a huge number of plots and presentations. It is impossible to keep up. A typical conference (like CHEP) will have 100's of plots. A single analysis result from a major experiment will have almost 50 plots. Scanning a conference or sorting out what plots are new is almost a full time job. The advent of multi-core computing and advanced video cards means that we have more processor power available for visualization than any time in the past. This poster describes two related projects that take advantage of this to solve the viewing problem. The first, Collider Plots, has a backend that looks for new plots released by ATLAS, CMS, CDF, and DZERO and organizes them by date, by experiment, and by subgroup for easy viewing and sorting. It maintains links back to associated conference notes and web pages with full result information. The second project, Deep Conference, renders all the slides as a single large zoomable picture. In both cases, much like a web mapping program, details are revealed as you zoom in. In the case of Collider Plots the plots are stacked as histograms to give visual clues for the most recent updates and activity have occurred. Standard plug-in software for a browser allows a user to zoom in on a portion of the conference that looks interesting. As the user zooms further more and more details become visible, allowing the user to make a quick and cheap decision on whether to spend more time on a particular talk or series of plots. Both projects are available at http://deeptalk.phys.washington.edu. The poster discusses the implementation and use as well as cross platform performance and possible future directions.

  18. Advanced spacecraft tracking techniques using the Tracking and Data Relay Satellite System /TDRSS/

    Science.gov (United States)

    Teles, J.; Ayres, C.

    1977-01-01

    The TDRSS will consist initially of two geosynchronous satellites and a common ground station at White Sands, New Mexico. According to current schedules, operations are to begin in November 1980. The overall TDRSS will provide high and low bit-rate telemetry, commands, and satellite-to-satellite tracking services. Each Tracking and Data Relay Satellite (TDRS) will have four antenna systems for NASA use. The common ground station at White Sands will have three 18-meter K-band antennas. The tracking equipment at the ground station is required to meet the following specifications: (1) 0.1-radian root-mean-square (rms) phase noise on nondestruct Doppler measurements; (2) 10-nanosecond rms range noise; (3) 50-nanosecond maximum systematic range error. Attention is given to two-way range and Doppler measurements, the bilateration tracking of TDRS, and an experiment using differenced one-way Doppler measurements.

  19. Analysing spatially extended high-dimensional chaos by recurrence plots

    CERN Document Server

    Marwana, Norbert; Foerster, Saskia

    2014-01-01

    Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. In this letter we show the potential of selected recurrence plot measures for the investigation of even high-dimensional chaos. We apply this method on spatially extended chaos, such as derived from the Lorenz96 model and show that the recurrence plot based measures can qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analyzing satellite image time series of vegetation cover with contrasting dynamics as a high-dimensional example from the real world.

  20. Recurrence plot analysis of spatially extended high-dimensional dynamics

    Science.gov (United States)

    Marwan, Norbert; Foerster, Saskia; Kurths, Jürgen

    2015-04-01

    Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. We show the potential of selected recurrence plot measures for the investigation of spatially extended high-dimensional dynamics by applying them to data from the Lorenz96 model. The recurrence plot based measures are able to qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analyzing satellite image time series of vegetation cover with contrasting dynamics as a spatially extended and potentially high-dimensional example from the real world.

  1. Analysing spatially extended high-dimensional dynamics by recurrence plots

    Science.gov (United States)

    Marwan, Norbert; Foerster, Saskia; Kurths, Jürgen

    2016-04-01

    Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. We show the potential of selected recurrence plot measures for the investigation of even high-dimensional dynamics. We apply this method on spatially extended chaos, such as derived from the Lorenz96 model and show that the recurrence plot based measures can qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analyzing satellite image time series of vegetation cover with contrasting dynamics as a spatially extended and potentially high-dimensional example from the real world.

  2. An Analysis of Property Rights in Privately Owned Family Plots

    Institute of Scientific and Technical Information of China (English)

    MengXiangzhong

    2005-01-01

    In the present Chinese system of rural land ownership, family plots still supplement the collectively-owned rural economy. As they occupy a very small proportion of the total amount of arable land, there has been little study of their economic effects; indeed, they have been totally neglected. In the past, under the planned economy, family plots could provide a diversified source of livelihood for Chinese farmers; at present, they have become a “bottleneck” obstructing the further industrialization of the rural economy. First of all, the ownership system for family plots fragments the system of land ownership, hindering the legal circulation of land-use,

  3. Dalitz plot distributions in presence of triangle singularities

    Energy Technology Data Exchange (ETDEWEB)

    Szczepaniak, Adam P., E-mail: aszczepa@indiana.edu [Department of Physics, Indiana University, Bloomington, IN 47405 (United States); Theory Center, Thomas Jefferson National Accelerator Facility, 12000 Jefferson Avenue, Newport News, VA 23606 (United States); Center for Exploration of Energy and Matter, Indiana University, Bloomington, IN 47403 (United States)

    2016-06-10

    We discuss properties of three-particle Dalitz distributions in coupled channel systems in presence of triangle singularities. The single channel case was discussed long ago [1] where it was found that as a consequence of unitarity, effects of a triangle singularity seen in the Dalitz plot are not seen in Dalitz plot projections. In the coupled channel case we find the same is true for the sum of intensities of all interacting channels. Unlike the single channel case, however, triangle singularities do remain visible in Dalitz plot projections of individual channels.

  4. Ground Wars

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Kleis

    Political campaigns today are won or lost in the so-called ground war--the strategic deployment of teams of staffers, volunteers, and paid part-timers who work the phones and canvass block by block, house by house, voter by voter. Ground Wars provides an in-depth ethnographic portrait of two...... infrastructures that utilize large databases with detailed individual-level information for targeting voters, and armies of dedicated volunteers and paid part-timers. Nielsen challenges the notion that political communication in America must be tightly scripted, controlled, and conducted by a select coterie...... of professionals. Yet he also quashes the romantic idea that canvassing is a purer form of grassroots politics. In today's political ground wars, Nielsen demonstrates, even the most ordinary-seeming volunteer knocking at your door is backed up by high-tech targeting technologies and party expertise. Ground Wars...

  5. Vegetation-plot data and databases in Europe: an overview

    NARCIS (Netherlands)

    Schaminée, J.H.J.; Hennekens, S.M.; Chytrý, M.; Rodwell, J.S.

    2009-01-01

    During the last decade many electronic databases of vegetation plots, mainly phytosociological relevés, were established in different European countries. These databases contain information which is extremely valuable for both testing various macroecological hypotheses and for nature conservation

  6. Field Plot Points for Voyageurs National Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — A total of 191 vegetation field plot samples were collected at Voyageurs National Park and environs to support vegetation classification development. Teams of...

  7. Casa Grande Ruins National Monument Vegetation Mapping Project - Plot Locations

    Data.gov (United States)

    National Park Service, Department of the Interior — This layer contains spatial information for 25 plots sampled during vegetation mapping and classification efforts at Casa Grande Ruins NM, AZ. Data was collected by...

  8. 2012 Four Square Mile survey plots : Kulm WMD

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Map of survey plots for the annual Four-Square-Mile survey conducted on the Kulm Wetland Management District (WMD) as part of a national effort to annually estimate...

  9. The master plot in the audiovisual narrative. The western case.

    Directory of Open Access Journals (Sweden)

    José Félix GONZÁLEZ SÁNCHEZ

    2015-05-01

    Full Text Available A plot provides us the story that it offers a hyphen and later a film. Plots are limited, however possibilities, argument them that these offer music infinite. At the same time, we can say that all cultures avail themselves of some plots and similar arguments to structure their mythical stories. In addition, United States is the modern nation where better a dialectic relation between the myth and story keeps. At this nation, the significance of the event has been shown and you have gotten free through the myth. We will see through this article how the western is the kind of American cinema what else and better answer for the folkloric traditional story to the cánones, because your plots have been taken directly of the classical legends.

  10. Recurrence plots of sunspots, solar flux and irradiance

    CERN Document Server

    Sparavigna, Amelia

    2008-01-01

    The paper shows the recurrence and cross recurrence plots of three time series, concerning data of the solar activity. The data are the sunspot number and the values of solar radio flux at 10.7 cm and of solar total irradiance, which are known as highly correlated. To compare the series, the radio flux and irradiance values are monthly averaged. Recurrence plots display the oscillating behaviour with remarkable features. Moreover, cross recurrence plots help in identifying time lags between the sunspot number maximum and the maximum of radio or irradiance signals, in circumstances where the data values are highly dispersed. Image processing is useful too, in enhancing the monitoring. An interesting behaviour is displayed by cross recurrence plots of irradiance, which are not symmetric with respect to the line of identity.

  11. Field Plot Points for Wupatki National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This spatial dataset in ESRI Coverage format maps field releve plot locations for the vegetation classification and descriptions of the vegetation map at Wupatki...

  12. Analysing spatially extended high-dimensional dynamics by recurrence plots

    Energy Technology Data Exchange (ETDEWEB)

    Marwan, Norbert, E-mail: marwan@pik-potsdam.de [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Kurths, Jürgen [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Humboldt Universität zu Berlin, Institut für Physik (Germany); Nizhny Novgorod State University, Department of Control Theory, Nizhny Novgorod (Russian Federation); Foerster, Saskia [GFZ German Research Centre for Geosciences, Section 1.4 Remote Sensing, Telegrafenberg, 14473 Potsdam (Germany)

    2015-05-08

    Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. In this letter we show the potential of selected recurrence plot measures for the investigation of even high-dimensional dynamics. We apply this method on spatially extended chaos, such as derived from the Lorenz96 model and show that the recurrence plot based measures can qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analysing satellite image time series of vegetation cover with contrasting dynamics as a spatially extended and potentially high-dimensional example from the real world. - Highlights: • We use recurrence plots for analysing partially extended dynamics. • We investigate the high-dimensional chaos of the Lorenz96 model. • The approach distinguishes different spatio-temporal dynamics. • We use the method for studying vegetation cover time series.

  13. A framework for plot control in interactive story systems

    Energy Technology Data Exchange (ETDEWEB)

    Sgouros, N.M.; Papakonstantinou, G.; Tsanakas, P. [National Technical Univ. of Athens, Zographou Campus (Greece)

    1996-12-31

    This paper presents a framework for plot control in interactive story systems. In this framework, the user takes the place of the main character of the story, the protagonist. The rest of the cast consists of discrete characters, each playing a specific role in the story. A separate module in this system, the plot manager, controls the behavior of the cast and specifies what the protagonist can do. The story plot is dynamically shaped by the interference between cast members and their social interactions. The system accepts as input a story map which provides the main metaphor for organizing the plot and localizes the interaction of the protagonist with the rest of the cast. We are implementing this framework in PEGASUS, an interactive travel story environment for Greek mythology.

  14. Graphical interpretation of confidence curves in rankit plots

    DEFF Research Database (Denmark)

    Hyltoft Petersen, Per; Blaabjerg, Ole; Andersen, Marianne

    2004-01-01

    A well-known transformation from the bell-shaped Gaussian (normal) curve to a straight line in the rankit plot is investigated, and a tool for evaluation of the distribution of reference groups is presented. It is based on the confidence intervals for percentiles of the calculated Gaussian...... distribution and the percentage of cumulative points exceeding these limits. The process is to rank the reference values and plot the cumulative frequency points in a rankit plot with a logarithmic (In=log(e)) transformed abscissa. If the distribution is close to In-Gaussian the cumulative frequency points...... presentation, however, makes it easy to disclose deviations from In-Gaussianity, and to make other interpretations of the distributions, e.g., comparison to non-Gaussian distributions in the same plot, where the cumulative frequency percentage can be read from the ordinate. A long list of examples of In...

  15. China's largest tropical rainforest dynamics plot established in Yunnan

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ A 20-ha Tropical Rainforest Dynamics Plot, located in Xishuangbanna in southwestern Yunnan Province, was recently established by the CAS Xishuangbanna Tropical Botanical Garden (XTBG) and the Xishuangbanna National Nature Reserve Administration recently.

  16. Field Plot Points for Tuzigoot National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — Vegetation field plots at Tuzigoot NM were visited, described, and documented in a digital database. The database consists of 3 parts - (1)Physical Descriptive Data,...

  17. Plotting partial correlation and regression in ecological studies

    Directory of Open Access Journals (Sweden)

    J. Moya-Laraño

    2008-06-01

    Full Text Available Multiple regression, the General linear model (GLM and the Generalized linear model (GLZ are widely used in ecology. The widespread use of graphs that include fitted regression lines to document patterns in simple linear regression can be easily extended to these multivariate techniques in plots that show the partial relationship of the dependent variable with each independent variable. However, the latter procedure is not nearly as widely used in ecological studies. In fact, a brief review of the recent ecological literature showed that in ca. 20% of the papers the results of multiple regression are displayed by plotting the dependent variable against the raw values of the independent variable. This latter procedure may be misleading because the value of the partial slope may change in magnitude and even in sign relative to the slope obtained in simple least-squares regression. Plots of partial relationships should be used in these situations. Using numerical simulations and real data we show how displaying plots of partial relationships may also be useful for: 1 visualizing the true scatter of points around the partial regression line, and 2 identifying influential observations and non-linear patterns more efficiently than using plots of residuals vs. fitted values. With the aim to help in the assessment of data quality, we show how partial residual plots (residuals from overall model + predicted values from the explanatory variable vs. the explanatory variable should only be used in restricted situations, and how partial regression plots (residuals of Y on the remaining explanatory variables vs. residuals of the target explanatory variable on the remaining explanatory variables should be the ones displayed in publications because they accurately reflect the scatter of partial correlations. Similarly, these partial plots can be applied to visualize the effect of continuous variables in GLM and GLZ for normal distributions and identity link

  18. The Ramachandran plots of glycine and pre-proline

    Directory of Open Access Journals (Sweden)

    Brasseur Robert

    2005-08-01

    Full Text Available Abstract Background The Ramachandran plot is a fundamental tool in the analysis of protein structures. Of the 4 basic types of Ramachandran plots, the interactions that determine the generic and proline Ramachandran plots are well understood. The interactions of the glycine and pre-proline Ramachandran plots are not. Results In glycine, the ψ angle is typically clustered at ψ = 180° and ψ = 0°. We show that these clusters correspond to conformations where either the Ni+1 or O atom is sandwiched between the two Hα atoms of glycine. We show that the shape of the 5 distinct regions of density (the α, αL, βS, βP and βPR regions can be reproduced with electrostatic dipole-dipole interactions. In pre-proline, we analyse the origin of the ζ region of the Ramachandran plot, a region unique to pre-proline. We show that it is stabilized by a COi-1···CδHδi+1 weak hydrogen bond. This is analogous to the COi-1···NHi+1 hydrogen bond that stabilizes the γ region in the generic Ramachandran plot. Conclusion We have identified the specific interactions that affect the backbone of glycine and pre-proline. Knowledge of these interactions will improve current force-fields, and help understand structural motifs containing these residues.

  19. Reviewing ChIPS, The Chandra Imaging and Plotting System

    Science.gov (United States)

    Miller, J.; Burke, D. J.; Evans, I. N.; Evans, J. D.; McLaughlin, W.

    2015-09-01

    The Chandra Imaging and Plotting System (ChIPS) is a 2D plotting system designed to allow users to easily create, manipulate, and produce publication quality visualizations. ChIPS has a simple but very powerful interactive interface that allows users to dynamically modify the contents and layout of their plots quickly and efficiently, with the results of any changes being immediately visible. ChIPS allows users to construct their plots fully interactively, and then save the final plot commands as a Python script. This bypasses the need to iteratively edit and rerun the script when developing the plot. Features such as undo and redo commands allow users to easily step backwards and forwards through previous commands, while the ability so save ChIPS sessions in a platform-independent state file allows the session to be restored at any time, even on another machine. Because ChIPS offers a Python interface, users can analyze their data using the broad array of modules offered in Python, and visualize the information in ChIPS at the same time. In this paper we explore the design decisions behind the development of ChIPS and some of the lessons learned along the way.

  20. Researches on Track Reconstruction for DAMPE

    Science.gov (United States)

    Lu, T. S.; Lei, S. J.; Zang, J. J.; Chang, J.; Wu, J.

    2016-05-01

    The Dark Matter Particle Explorer (DAMPE) is aimed to study the existence and distribution of dark matter via observation of high energy particles in space with unprecedented large energy bandwidth, high energy resolution, and high space resolution. The track reconstruction is to restore the positions and angles of the incident particles using the multiple observations of different channels at different positions, and its accuracy determines the angular resolution of the detector. The track reconstruction is mainly based on the observations of two sub-detectors, namely, the Silicon Tracker (STK) detector and the BGO (Bi_4Ge_3O12) calorimeter. In accordance with the design and structure of the two sub-detectors and using the data collected during the beam tests and ground tests, we provide a detailed introduction of the track reconstruction of DAMPE data, including three basic steps, the selection of track hits, the fitting of track hits, and the judgement of the best track among (most probably) many of them. Since a high energy particle most probably leaves more than one hit in each level of the STK and BGO, we first provide a method to constrain the STK clusters for the track reconstruction using the rough result of the BGO reconstruction. We apply two different algorithms, the Kalman filter and the least square linear fitting, to fit the track hits. The consistency of the results obtained independently via the two algorithms confirms the validity of our track reconstruction results, and we discuss the advantages/disadvantages of each method. Several criteria combining the BGO and STK detection are discussed for picking out the most possible track among all the tracks found in the track reconstruction. Using the track reconstruction methods mentioned in this article and the beam test data, we confirm that the angular resolution of DAMPE satisfies the requirement in design.

  1. INNER TRACKING

    CERN Multimedia

    P. Sharp

    The CMS Inner Tracking Detector continues to make good progress. The successful commissioning of ~ 25% of the Silicon Strip Tracker was completed in the Tracker Integration Facility (TIF) at CERN in July 2007 and the Tracker has since been prepared for moving and installation into CMS at P5. The Tracker was ready to move on schedule in September 2007. The Installation of the Tracker cooling pipes and LV cables between Patch Panel 1 (PP1) on the inside the CMS magnet cryostat, and the cooling plants and power system racks on the balconies has been completed. The optical fibres from PP1 to the readout FEDs in the USC have been installed, together with the Tracker cable channels, in parallel with the installation of the EB/HB services. All of the Tracker Safety, Power, DCS and the VME Readout Systems have been installed at P5 and are being tested and commissioned with CMS. It is planned to install the Tracker into CMS before Christmas. The Tracker will then be connected to the pre-installed services on Y...

  2. INNER TRACKING

    CERN Multimedia

    P. Sharp

    The CMS Inner Tracking Detector continues to make good progress. The successful commissioning of ~ 25% of the Silicon Strip Tracker was completed in the Tracker Integration Facility (TIF) at CERN on 18 July 2007 and the Tracker has since been prepared for moving and installation into CMS at P5. The Tracker will be ready to move on schedule in September 2007. The Installation of the Tracker cooling pipes and LV cables between Patch Panel 1 (PP1) on the inside the CMS magnet cryostat, and the cooling plants and power system racks on the balconies has been completed. The optical fibres from PP1 to the readout FEDs in the USC will be installed in parallel with the installation of the EB/HB services, and will be completed in October. It is planned to install the Tracker into CMS at the end of October, after the completion of the installation of the EB/HB services. The Tracker will then be connected to the pre-installed services on YB0 and commissioned with CMS in December. The FPix and BPix continue to make ...

  3. Track score processing of multiple dissimilar sensors

    OpenAIRE

    Patsikas, Dimitrios

    2007-01-01

    In this thesis, a data fusion problem when a number of different types of sensors are deployed in the vicinity of a ballistic missile launch is studied. An objective of this thesis is to calculate a scoring function for each sensor track, and the track file with the best (optimum) track score can then be used for guiding an interceptor to the threat within the boost phase. Seven active ground-based radars, two space-based passive infrared sensors and two active light detection and rangin...

  4. Patient Treatment Tracking Chart

    Science.gov (United States)

    ... ZIP code here Hepatitis C Treatment Tracking Chart Patient Treatment Tracking Chart Patient Treatment Tracking Chart Sample Chart This chart is ... this website Submit Share this page Related Resource Patient Treatment Tutorial return to top CONNECT Veterans Crisis ...

  5. Atrial fibrillation detection by heart rate variability in Poincare plot

    Directory of Open Access Journals (Sweden)

    Jeon Moongu

    2009-12-01

    Full Text Available Abstract Background Atrial fibrillation (AFib is one of the prominent causes of stroke, and its risk increases with age. We need to detect AFib correctly as early as possible to avoid medical disaster because it is likely to proceed into a more serious form in short time. If we can make a portable AFib monitoring system, it will be helpful to many old people because we cannot predict when a patient will have a spasm of AFib. Methods We analyzed heart beat variability from inter-beat intervals obtained by a wavelet-based detector. We made a Poincare plot using the inter-beat intervals. By analyzing the plot, we extracted three feature measures characterizing AFib and non-AFib: the number of clusters, mean stepping increment of inter-beat intervals, and dispersion of the points around a diagonal line in the plot. We divided distribution of the number of clusters into two and calculated mean value of the lower part by k-means clustering method. We classified data whose number of clusters is more than one and less than this mean value as non-AFib data. In the other case, we tried to discriminate AFib from non-AFib using support vector machine with the other feature measures: the mean stepping increment and dispersion of the points in the Poincare plot. Results We found that Poincare plot from non-AFib data showed some pattern, while the plot from AFib data showed irregularly irregular shape. In case of non-AFib data, the definite pattern in the plot manifested itself with some limited number of clusters or closely packed one cluster. In case of AFib data, the number of clusters in the plot was one or too many. We evaluated the accuracy using leave-one-out cross-validation. Mean sensitivity and mean specificity were 91.4% and 92.9% respectively. Conclusions Because pulse beats of ventricles are less likely to be influenced by baseline wandering and noise, we used the inter-beat intervals to diagnose AFib. We visually displayed regularity of the inter

  6. LiTrack A Fast longitudinal phase space tracking code with graphical user interface

    CERN Document Server

    Emma, Paul

    2005-01-01

    Many linear accelerators, such as linac-based light sources and linear colliders, apply longitudinal phase space manipulations in their design, including electron bunch compression and wakefield-induced energy spread control. Several computer codes handle such issues, but most require detailed information on the transverse focusing lattice. In fact, in most linear accelerators, the transverse distributions do not significantly affect the longitudinal, and can be ignored initially. This allows the use of a fast 2D code to study longitudinal aspects without time-consuming considerations of the transverse focusing. LiTrack is based on a 15-year old code (same name) originally written by one of us (KB), which is now a MATLAB-based code with additional features, such as a graphical user interface and output plotting. The single-bunch tracking includes RF acceleration, bunch compression to 3rd order, geometric and resistive wakefields, aperture limits, synchrotron radiation, and flexible output plotting. The code w...

  7. Split-plot Experiments with Unusual Numbers of Subplot Runs

    DEFF Research Database (Denmark)

    Kulahci, Murat

    2007-01-01

    In many experimental situations, it may not be feasible or even possible to run experiments in a completely randomized fashion as usually recommended. Under these circumstances, split-plot experiments in which certain factors are changed less frequently than the others are often used. Most...... of the literature on split-plot designs is based on 2-level factorials. For those designs, the number of subplots is a power of 2. There may however be some situations where for cost purposes or physical constraints, we may need to have unusual number of subplots such as 3, 5, 6, etc. In this article, we explore...... this issue and provide some examples based on the Plackett and Burman designs. Also algorithmically constructed D-optimal split-plot designs are compared to those based on Plackett and Burman designs....

  8. D.3.3 PLOT Persuasive Learning Design Framework

    DEFF Research Database (Denmark)

    Gram-Hansen, Sandra Burri

    2012-01-01

    In this third and final deliverable of WP3: Persuasive Learning Designs, the theoretical cross field between persuasion and learning and the practical analysis of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool......, are linked together as persuasive learning designs are defined and exemplified through the four e-PLOT cases. Based on the literary study of D.3.1 as well as the subsequent discussions and reflections regarding the theoretical foundation and practical application of persuasive learning technologies......, and in acknowledgement that the results of this deliverable are to be applicable in both WP4 and 5, the persuasive learning designs presented in this report are not summarized as patterns. Instead the definition of persuasive learning designs is presented on more general terms and exemplified in relation to the e-PLOT...

  9. Cross recurrence plot based synchronization of time series

    Directory of Open Access Journals (Sweden)

    N. Marwan

    2002-01-01

    Full Text Available The method of recurrence plots is extended to the cross recurrence plots (CRP which, among others, enables the study of synchronization or time differences in two time series. This is emphasized in a distorted main diagonal in the cross recurrence plot, the line of synchronization (LOS. A non-parametrical fit of this LOS can be used to rescale the time axis of the two data series (whereby one of them is compressed or stretched so that they are synchronized. An application of this method to geophysical sediment core data illustrates its suitability for real data. The rock magnetic data of two different sediment cores from the Makarov Basin can be adjusted to each other by using this method, so that they are comparable.

  10. Cross Recurrence Plot Based Synchronization of Time Series

    CERN Document Server

    Marwan, N; Nowaczyk, N R

    2002-01-01

    The method of recurrence plots is extended to the cross recurrence plots (CRP), which among others enables the study of synchronization or time differences in two time series. This is emphasized in a distorted main diagonal in the cross recurrence plot, the line of synchronization (LOS). A non-parametrical fit of this LOS can be used to rescale the time axis of the two data series (whereby one of it is e.g. compressed or stretched) so that they are synchronized. An application of this method to geophysical sediment core data illustrates its suitability for real data. The rock magnetic data of two different sediment cores from the Makarov Basin can be adjusted to each other by using this method, so that they are comparable.

  11. Experts’ Misinterpretation of Box Plots – a Dual Processing Approach

    Directory of Open Access Journals (Sweden)

    Stephanie Lem

    2014-11-01

    Full Text Available Recent studies have shown that students often misinterpret the area of the box in box plots as representing the frequency or proportion of observations in that interval, while it actually represents density. This misinterpretation has been shown to be based on the saliency of this area and can be explained by heuristic reasoning as defined by dual process theories. In this study we tested whether expert users of box plots also display this misinterpretation and show signs of the same heuristic reasoning as found in students. Using a reaction time test, we found signs of heuristic reasoning in experts, both with respect to accuracy and reaction times. If even experts have difficulty interpreting box plots, one can question whether these are an appropriate form of representation to use when reporting data and deserve the prominent place they currently have in the statistics curriculum.

  12. Scan path entropy and Arrow plots: Capturing scanning behavior of multiple observers

    Directory of Open Access Journals (Sweden)

    Ignace T C Hooge

    2013-12-01

    Full Text Available Designers of visual communication material want their material to attract and retain attention. In marketing research, heat maps, dwell time, and time to AOI first hit are often used as evaluation parameters. Here we present two additional measures 1 scan path entropy to quantify gaze guidance and 2 the arrow plot to visualize the average scan path. Both are based on string representations of scan paths. The latter also incorporates transition matrices and time required for 50% of the observers to first hit AOIs (T50. The new measures were tested in an eye tracking study (48 observers, 39 advertisements. Scan path entropy is a sensible measure for gaze guidance and the new visualization method reveals aspects of the average scan path and gives a better indication in what order global scanning takes place.

  13. Design criteria and eigensequence plots for satellite computed tomography

    Science.gov (United States)

    Wahba, G.

    1983-01-01

    The use of the degrees of freedom for signal is proposed as a design criteria for comparing different designs for satellite and other measuring systems. It is also proposed that certain eigensequence plots be examined at the design stage along with appropriate estimates of the parameter lambda playing the role of noise to signal ratio. The degrees of freedom for signal and the eigensequence plots may be determined using prior information in the spectral domain which is presently available along with a description of the system, and simulated data for estimating lambda. This work extends the 1972 work of Weinreb and Crosby.

  14. D.3.2 PLOT Persuasive Learning Design Framework

    DEFF Research Database (Denmark)

    Gram-Hansen, Sandra Burri; Schärfe, Henrik; Winther-Nielsen, Nicolai

    2011-01-01

    of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool, and a selection of GLOs and learning exercises. The primary focus of the analysis is to explore how the theoretical perspectives presented in D.3.1 are represented in these tools......, in particular the notions of persuasive design and constructive alignment. Whilst the report provides a persuasive design perspective on the technologies related to Euro PLOT, it must be stressed that if the document is to function as a basis for further discussion within the consortium, the partners...

  15. [Recurrence plot analysis of HRV for brain ischemia and asphyxia].

    Science.gov (United States)

    Chen, Xiaoming; Qiu, Yihong; Zhu, Yisheng

    2008-02-01

    Heart rate variability (HRV) is the tiny variability existing in the cycles of the heart beats, which reflects the corresponding balance between sympathetic and vagus nerves. Since the nonlinear characteristic of HRV is confirmed, the Recurrence Plot method, a nonlinear dynamic analysis method based on the complexity, could be used to analyze HRV. The results showed the recurrence plot structures and some quantitative indices (L-Mean, L-Entr) during asphyxia insult vary significantly as compared to those in normal conditions, which offer a new method to monitor brain asphyxia injury.

  16. Recurrence plots and recurrence quantification analysis of human motion data

    Science.gov (United States)

    Josiński, Henryk; Michalczuk, Agnieszka; Świtoński, Adam; Szczesna, Agnieszka; Wojciechowski, Konrad

    2016-06-01

    The authors present exemplary application of recurrence plots, cross recurrence plots and recurrence quantification analysis for the purpose of exploration of experimental time series describing selected aspects of human motion. Time series were extracted from treadmill gait sequences which were recorded in the Human Motion Laboratory (HML) of the Polish-Japanese Academy of Information Technology in Bytom, Poland by means of the Vicon system. Analysis was focused on the time series representing movements of hip, knee, ankle and wrist joints in the sagittal plane.

  17. Facilitated gate setting by sequential dot plot scanning.

    Science.gov (United States)

    Günther, Susanne; Müller, Susann

    2015-07-01

    Microbial communities comprising thousands of unknown organisms can be studied flow cytometrically by applying just one fluorescent parameter and using scatter characteristics of cells. Resulting 2D-plots need to represent high numbers of cells to detect the many subcommunities, even rare ones that might be present in the sample. Evaluation of such data can be faulty and subjective due to the low number of parameters available for data discrimination and the high numbers of overlaying events. Here, we describe a procedure that helps to evaluate such data using facilitated gate setting by sequential dot-plot scanning.

  18. On the Nature of Earth-Mars Porkchop Plots

    Science.gov (United States)

    Woolley, Ryan C.; Whetsel, Charles W.

    2013-01-01

    Porkchop plots are a quick and convenient tool to help mission designers plan ballistic trajectories between two bodies. Parameter contours give rise to the familiar 'porkchop' shape. Each synodic period the pattern repeats, but not exactly, primarily due to differences in inclination and non-zero eccentricity. In this paper we examine the morphological features of Earth-to-Mars porkchop plots and the orbital characteristics that create them. These results are compared to idealistic and optimized transfers. Conclusions are drawn about 'good' opportunities versus 'bad' opportunities for different mission applications.

  19. Evaluation of a Smartphone App for Forest Sample Plot Measurements

    OpenAIRE

    Mikko Vastaranta; Eduardo González Latorre; Ville Luoma; Ninni Saarinen; Markus Holopainen; Juha Hyyppä

    2015-01-01

    We evaluated a smartphone app (TRESTIMA(TM)) for forest sample plot measurements. The app interprets imagery collected from the sample plots using the camera in the smartphone and then estimates forest inventory attributes, including species-specific basal areas (G) as well as the diameter (D-gM) and height (H-gM) of basal area median trees. The estimates from the smartphone app were compared to forest inventory attributes derived from tree-wise measurements using calipers and a Vertex height...

  20. On the Nature of Earth-Mars Porkchop Plots

    Science.gov (United States)

    Woolley, Ryan C.; Whetsel, Charles W.

    2013-01-01

    Porkchop plots are a quick and convenient tool to help mission designers plan ballistic trajectories between two bodies. Parameter contours give rise to the familiar 'porkchop' shape. Each synodic period the pattern repeats, but not exactly, primarily due to differences in inclination and non-zero eccentricity. In this paper we examine the morphological features of Earth-to-Mars porkchop plots and the orbital characteristics that create them. These results are compared to idealistic and optimized transfers. Conclusions are drawn about 'good' opportunities versus 'bad' opportunities for different mission applications.

  1. PlotXY: A High Quality Plotting System for the Herschel Interactive Processing Environment (HIPE) and the Astronomical Community

    Science.gov (United States)

    Panuzzo, P.; Li, J.; Caux, E.

    2012-09-01

    The Herschel Interactive Processing Environment (HIPE) was developed by the European Space Agency (ESA) in collaboration with NASA and the Herschel Instrument Control Centres, to provide the astronomical community a complete environment to process and analyze the data gathered by the Herschel Space Observatory. One of the most important components of HIPE is the plotting system (named PlotXY) that we present here. With PlotXY it is possible to produce easily high quality publication-ready 2D plots. It provides a long list of features, with fully configurable components, and interactive zooming. The entire code of HIPE is written in Java and is open source released under the GNU Lesser General Public License version 3. A new version of PlotXY is being developed to be independent from the HIPE code base; it is available to the software development community for the inclusion in other projects at the URL google.com/p/jplot2d/'>http://code.google.com/p/jplot2d/.

  2. Solar tracking system

    Energy Technology Data Exchange (ETDEWEB)

    Okandan, Murat; Nielson, Gregory N.

    2016-07-12

    Solar tracking systems, as well as methods of using such solar tracking systems, are disclosed. More particularly, embodiments of the solar tracking systems include lateral supports horizontally positioned between uprights to support photovoltaic modules. The lateral supports may be raised and lowered along the uprights or translated to cause the photovoltaic modules to track the moving sun.

  3. Multimodal image registration using floating regressors in the joint intensity scatter plot.

    Science.gov (United States)

    Orchard, Jeff

    2008-08-01

    This paper presents a new approach for multimodal medical image registration and compares it to normalized mutual information (NMI) and the correlation ratio (CR). Like NMI and CR, the new method's measure of registration quality is based on the distribution of points in the joint intensity scatter plot (JISP); compact clusters indicate good registration. This method iteratively fits the JISP clusters with regressors (in the form of points and line segments), and uses those regressors to efficiently compute the next motion increment. The result is a striking, dynamic process in which the regressors float around the JISP, tracking groups of points as they contract into tight clusters. One of the method's strengths is that it is intuitive and customizable, offering a multitude of ways to incorporate prior knowledge to guide the registration process. Moreover, the method is adaptive, and can adjust itself to fit data that does not quite match the prior model. Finally, the method is efficiently expandable to higher-dimensional scatter plots, avoiding the "curse of dimensionality" inherent in histogram-based registration methods such as MI and NMI. In two sets of experiments, a simple implementation of the new registration framework is shown to be comparable to (if not superior to) state-of-the-art implementations of NMI and CR in both accuracy and convergence robustness.

  4. Field Plot and Accuracy Assessment Points for Palo Alto Battlefield National Historical Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — Accuracy Assessment, Observation and Plot Points. Plot data were collected from 2000-2003; however, minimal attributes were maintained and a plots database was not...

  5. Field Plot and Accuracy Assessment Points for Hagerman Fossil Beds National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — Accuracy Assessment, Observation and Plot Points. Plot points were created from the GPS coordinates recorded at the center of each plot to map their distribution and...

  6. Vegetation associated with different walking track types in the Kosciuszko alpine area, Australia.

    Science.gov (United States)

    Hill, Wendy; Pickering, Catherine Marina

    2006-01-01

    Tourism infrastructure such as walking tracks can have negative effects on vegetation including in mountain regions. In the alpine area around continental Australia's highest mountain, Mt Kosciuszko (2228 m), there is a range of walking tracks (paved, gravel and raised steel mesh surfaces) in addition to an extensive network of informal/non-hardened tracks. Vegetation characteristics were compared between track types on/under tracks, on the track verge, and in the adjacent native vegetation. For a raised steel mesh walkway there was no difference in vegetation under the walkway, on the verge, and 3m away. In contrast, for a non-hardened track there was 35% bare ground on the track surface but no other detectable impacts. Gravel and paved tracks had distinct verges largely comprising bare ground and exotic species. For non-hardened tracks there was an estimated 270 m2 of disturbance per km of track. For wide gravel tracks the combined area of bare ground, exotic plants and gravel was estimated as 4290 m2 per km, while for narrow gravel tracks it was estimated as 2940 m2 per km. For paved tracks there was around 2680 m2 per km of damage. In contrast, there was no detectable effect of raised steel mesh walkway on vegetation highlighting some of the benefits of this surface over other track types.

  7. How useful are Green-Ampt parameters derived from small rainfall simulation plots for modelling runoff at different plot lengths?

    Science.gov (United States)

    Langhans, Christoph; Engels, Lien; Tegenbos, Lize; Govers, Gerard; Diels, Jan

    2010-05-01

    Rainfall simulation on small field plots is an invaluable method to derive effective field parameters for infiltration models such as Green-Ampt. Plot scales of ca. 1m² integrate much of the micro-scale variability and processes, which ring-infiltrometers or soil core measurements cannot capture. However, these parameters have to be used with caution on larger scales, because processes such as run-on infiltration can be considerable. The Green-Ampt parameters suction across the wetting front (psi) and effective hydraulic conductivity (Ke) were estimated from rainfall simulations on two ridged fields in Togo, West Africa. Additionally, rainfall events were recorded, and on plots of 1m width and lengths of 1, 4 and 16m, total runoff volume and sediment concentration were measured. The storm runoff hydrographs of the plots were modelled with Chu's Green-Ampt variable rainfall intensity infiltration model, using the field-average parameters derived from the simulations. Potential effects of runoff lag time were assumed negligible. Calculated total runoff volumes were compared to measured runoff volumes. For the 1m plots, runoff was underestimated, as patches of seal in the furrows produced runoff already at rainfall intensities much lower than the average infiltration capacity. For the longer plots, no run-on infiltration or other scale dependent processes were assumed, so the relative error due to scale effects was proportional to the average difference or runoff depth. In contrast to the 1m plots, runoff was overestimated by a factor of 1.2 and 2 for the 4m and 16m plots, respectively. It appears that the application of the Green-Ampt effective hydraulic conductivity derived from rainfall simulations faces two main problems, which are their dependence on one single rainfall intensity and scale-effects by run-on infiltration. Errors necessarily propagate into the scale dependency of erosion and sediment transport, as these processes are directly dependent on runoff

  8. A Conductive Gel for the Plotting of Equipotential Lines

    Science.gov (United States)

    Elizalde-Torres, J.; González-Cardel, M.; Vega-Murguía, E. J.; Castillo-González, I.; Rodríguez-Nava, M.

    2015-01-01

    This paper presents the development of a conductive gel that can be used to measure the electrical potential differences on its surface, and has enough consistency to plot equipotential lines. It has a gelation time of less than 10 min, and is suitable for implementing learning experiences in a physics teaching laboratory in a 90 min session. To…

  9. Designing fractional factorial split-plot experiments using integer programming

    DEFF Research Database (Denmark)

    Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

    2011-01-01

    factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

  10. 70 Years of permanent plot research in The Netherlands

    NARCIS (Netherlands)

    Smits, N.A.C.; Schaminée, J.H.J.; Duuren, van L.

    2002-01-01

    Within the framework of the Dutch `Network Ecological Monitoring¿, a large set of new permanent plots has been established to monitor selected plant communities throughout The Netherlands for studying the effects of environmental changes on species composition of semi-natural communities. This

  11. D.3.1 PLOT Persuasive Learning Design Framework

    DEFF Research Database (Denmark)

    Gram-Hansen, Sandra Burri; Schärfe, Henrik; Dinesen, Jens Vilhelm

    2011-01-01

    , constructive alignment, and towards a common understanding of the ethical stances we believe should underpin persuasive efforts. In section 4, we present viewpoints on the four cases, central to the PLOT project. This section is the result of a workshop held at the consortium meeting in Aalborg. Finally...

  12. Designing fractional factorial split-plot experiments using integer programming

    DEFF Research Database (Denmark)

    Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

    2011-01-01

    factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

  13. Constructing General Orthogonal Fractional Factorial Split-Plot Designs

    NARCIS (Netherlands)

    Sartono, B.; Goos, P.; Schoen, E.

    2015-01-01

    While the orthogonal design of split-plot fractional factorial experiments has received much attention already, there are still major voids in the literature. First, designs with one or more factors acting at more than two levels have not yet been considered. Second, published work on nonregular fra

  14. Omitted Variable Sensitivity Analysis with the Annotated Love Plot

    Science.gov (United States)

    Hansen, Ben B.; Fredrickson, Mark M.

    2014-01-01

    The goal of this research is to make sensitivity analysis accessible not only to empirical researchers but also to the various stakeholders for whom educational evaluations are conducted. To do this it derives anchors for the omitted variable (OV)-program participation association intrinsically, using the Love plot to present a wide range of…

  15. A Simple Interactive Software Package for Plotting, Animating, and Calculating

    Science.gov (United States)

    Engelhardt, Larry

    2012-01-01

    We introduce a new open source (free) software package that provides a simple, highly interactive interface for carrying out certain mathematical tasks that are commonly encountered in physics. These tasks include plotting and animating functions, solving systems of coupled algebraic equations, and basic calculus (differentiating and integrating…

  16. A New method of preparing iso-hardness plots

    Science.gov (United States)

    Kumar, V.; Patwardhan, A. K.

    1993-02-01

    A new approach has been used for the preparation of iso-hardness plots, which are very useful in the heat treating of metals and alloys. An alloy white iron containing ~6% Mn, ~5% Cr, and ~3% Cu was heat treated at 800,850,900,950,1000, and 1050 °C and soaked for 2, 4, 6, 8, and 10 h, respectively, at each of these temperatures followed by air cooling. It was observed that, although the hardness varied linearly with soaking time, its variation with soaking temperature was nonlinear. This can be represented as: H = 98.285e2021.33/T + (0.037 - 0.316 × 10- 4 T) . t where H is Vickers hardness; T is soaking temperature in K; and t is soaking time in seconds. The variation in hardness has been discussed in light of microstructural changes that can take place upon heat treating. A three-dimensional plot of hardness, soaking temperature, and time was prepared based on the above equation. It revealed that the variation in hardness on heat treating can be represented as a surface instead of lines, where the change in the slope of the surface reflects the various transformations occurring in the alloy system. This iso- hardness plot, consisting of contours of constant hardness, has been prepared by projecting the above-mentioned surface on the soaking temperature- time plane. The method of selection of heat treating parameters based on this iso- hardness plot is discussed.

  17. Subclassifying disordered proteins by the CH-CDF plot method.

    Science.gov (United States)

    Huang, Fei; Oldfield, Christopher; Meng, Jingwei; Hsu, Wei-Lun; Xue, Bin; Uversky, Vladimir N; Romero, Pedro; Dunker, A Keith

    2012-01-01

    Intrinsically disordered proteins (IDPs) are associated with a wide range of functions. We suggest that sequence-based subtypes, which we call flavors, may provide the basis for different biological functions. The problem is to find a method that separates IDPs into different flavor / function groups. Here we discuss one approach, the (Charge-Hydropathy) versus (Cumulative Distribution Function) plot or CH-CDF plot, which is based the combined use of the CH and CDF disorder predictors. These two predictors are based on significantly different inputs and methods. This CH-CDF plot partitions all proteins into 4 groups: structured, mixed, disordered, and rare. Studies of the Protein Data Bank (PDB) entries and homologous show different structural biases for each group classified by the CH-CDF plot. The mixed class has more order-promoting residues and more ordered regions than the disordered class. To test whether this partition accomplishes any functional separation, we performed gene ontology (GO) term analysis on each class. Some functions are indeed found to be related to subtypes of disorder: the disordered class is highly active in mitosis-related processes among others. Meanwhile, the mixed class is highly associated with signaling pathways, where having both ordered and disordered regions could possibly be important.

  18. Developing Box Plots While Navigating the Maze of Data Representations

    Science.gov (United States)

    Duncan, Bruce; Fitzallen, Noleine

    2013-01-01

    The learning sequence described in this article was developed to provide students with a demonstration of the development of box plots from authentic data as an illustration of the advantages gained from using multiple forms of data representation. The sequence follows an authentic process that starts with a problem to which data representations…

  19. Polar plot representation of time-resolved fluorescence.

    Science.gov (United States)

    Eichorst, John Paul; Wen Teng, Kai; Clegg, Robert M

    2014-01-01

    Measuring changes in a molecule's fluorescence emission is a common technique to study complex biological systems such as cells and tissues. Although the steady-state fluorescence intensity is frequently used, measuring the average amount of time that a molecule spends in the excited state (the fluorescence lifetime) reveals more detailed information about its local environment. The lifetime is measured in the time domain by detecting directly the decay of fluorescence following excitation by short pulse of light. The lifetime can also be measured in the frequency domain by recording the phase and amplitude of oscillation in the emitted fluorescence of the sample in response to repetitively modulated excitation light. In either the time or frequency domain, the analysis of data to extract lifetimes can be computationally intensive. For example, a variety of iterative fitting algorithms already exist to determine lifetimes from samples that contain multiple fluorescing species. However, recently a method of analysis referred to as the polar plot (or phasor plot) is a graphical tool that projects the time-dependent features of the sample's fluorescence in either the time or frequency domain into the Cartesian plane to characterize the sample's lifetime. The coordinate transformations of the polar plot require only the raw data, and hence, there are no uncertainties from extensive corrections or time-consuming fitting in this analysis. In this chapter, the history and mathematical background of the polar plot will be presented along with examples that highlight how it can be used in both cuvette-based and imaging applications.

  20. Igloo-Plot: a tool for visualization of multidimensional datasets.

    Science.gov (United States)

    Kuntal, Bhusan K; Ghosh, Tarini Shankar; Mande, Sharmila S

    2014-01-01

    Advances in science and technology have resulted in an exponential growth of multivariate (or multi-dimensional) datasets which are being generated from various research areas especially in the domain of biological sciences. Visualization and analysis of such data (with the objective of uncovering the hidden patterns therein) is an important and challenging task. We present a tool, called Igloo-Plot, for efficient visualization of multidimensional datasets. The tool addresses some of the key limitations of contemporary multivariate visualization and analysis tools. The visualization layout, not only facilitates an easy identification of clusters of data-points having similar feature compositions, but also the 'marker features' specific to each of these clusters. The applicability of the various functionalities implemented herein is demonstrated using several well studied multi-dimensional datasets. Igloo-Plot is expected to be a valuable resource for researchers working in multivariate data mining studies. Igloo-Plot is available for download from: http://metagenomics.atc.tcs.com/IglooPlot/.

  1. Box-and-Whisker Plots Applied to Food Chemistry

    Science.gov (United States)

    Ferreira, Joao E. V.; Miranda, Ricardo M.; Figueiredo, Antonio F.; Barbosa, Jardel P.; Brasil, Edykarlos M.

    2016-01-01

    Box-and-whisker plots or simply boxplots are powerful graphical representations that give an overview of a data set. In this work five different examples illustrate the applications of boxplots in food chemistry. The examples involve relative sweetness of sugars and sugar alcohols with respect to sucrose, the potassium content of fruits and…

  2. Non-parametric and least squares Langley plot methods

    Directory of Open Access Journals (Sweden)

    P. W. Kiedron

    2015-04-01

    Full Text Available Langley plots are used to calibrate sun radiometers primarily for the measurement of the aerosol component of the atmosphere that attenuates (scatters and absorbs incoming direct solar radiation. In principle, the calibration of a sun radiometer is a straightforward application of the Bouguer–Lambert–Beer law V=V>/i>0e−τ ·m, where a plot of ln (V voltage vs. m air mass yields a straight line with intercept ln (V0. This ln (V0 subsequently can be used to solve for τ for any measurement of V and calculation of m. This calibration works well on some high mountain sites, but the application of the Langley plot calibration technique is more complicated at other, more interesting, locales. This paper is concerned with ferreting out calibrations at difficult sites and examining and comparing a number of conventional and non-conventional methods for obtaining successful Langley plots. The eleven techniques discussed indicate that both least squares and various non-parametric techniques produce satisfactory calibrations with no significant differences among them when the time series of ln (V0's are smoothed and interpolated with median and mean moving window filters.

  3. Box-and-Whisker Plots Applied to Food Chemistry

    Science.gov (United States)

    Ferreira, Joao E. V.; Miranda, Ricardo M.; Figueiredo, Antonio F.; Barbosa, Jardel P.; Brasil, Edykarlos M.

    2016-01-01

    Box-and-whisker plots or simply boxplots are powerful graphical representations that give an overview of a data set. In this work five different examples illustrate the applications of boxplots in food chemistry. The examples involve relative sweetness of sugars and sugar alcohols with respect to sucrose, the potassium content of fruits and…

  4. Tracker: Image-Processing and Object-Tracking System Developed

    Science.gov (United States)

    Klimek, Robert B.; Wright, Theodore W.

    1999-01-01

    Tracker is an object-tracking and image-processing program designed and developed at the NASA Lewis Research Center to help with the analysis of images generated by microgravity combustion and fluid physics experiments. Experiments are often recorded on film or videotape for analysis later. Tracker automates the process of examining each frame of the recorded experiment, performing image-processing operations to bring out the desired detail, and recording the positions of the objects of interest. It can load sequences of images from disk files or acquire images (via a frame grabber) from film transports, videotape, laser disks, or a live camera. Tracker controls the image source to automatically advance to the next frame. It can employ a large array of image-processing operations to enhance the detail of the acquired images and can analyze an arbitrarily large number of objects simultaneously. Several different tracking algorithms are available, including conventional threshold and correlation-based techniques, and more esoteric procedures such as "snake" tracking and automated recognition of character data in the image. The Tracker software was written to be operated by researchers, thus every attempt was made to make the software as user friendly and self-explanatory as possible. Tracker is used by most of the microgravity combustion and fluid physics experiments performed by Lewis, and by visiting researchers. This includes experiments performed on the space shuttles, Mir, sounding rockets, zero-g research airplanes, drop towers, and ground-based laboratories. This software automates the analysis of the flame or liquid s physical parameters such as position, velocity, acceleration, size, shape, intensity characteristics, color, and centroid, as well as a number of other measurements. It can perform these operations on multiple objects simultaneously. Another key feature of Tracker is that it performs optical character recognition (OCR). This feature is useful in

  5. Comparative water balance study of forest and fallow plots

    Directory of Open Access Journals (Sweden)

    Móricz N

    2012-08-01

    Full Text Available Increasing pressure on groundwater due to land use change (e.g., afforestation and future climate change will alter the recharge of groundwater aquifers, causing shifts in water table levels and hence influencing the avai­lable groundwater resources. The effect of land use change on groundwater resources has initiated a major scientific debate during the last decades between foresters and experts in water management in Hungary and in several other countries. The aim of this study was to compare water balances of two different vegetation covers, a groundwater dependent oak forest and a nearby fallow area in the Hungarian Lowland. Water balance components for an oak and a fallow plots, exposed to similar weather conditions and with similar soils, were estimated and compared by calibrating the Hydrus 1-D model using mea­sured soil water content and groundwater levels. The difference in the groundwater consumption was analyzed in details during dry and wet growing seasons. Transpiration at the fallow plot was only about two-thirds of that in the oak forest, while groundwater consumption was three times higher in the forest than at the fallow plot throughout the two-year study. During the dry growing season, the proportion of groundwater use from the total transpiration reached up to 90% at the oak plot. According to the model, in the dry growing season in 2007 both vegetation covers relied significantly on groundwater resources, while in 2008 the consumption of groundwater was notably reduced due to the wet weather at both plots.

  6. Aquifer test interpretation using derivative analysis and diagnostic plots

    Science.gov (United States)

    Hernández-Espriú, Antonio; Real-Rangel, Roberto; Cortés-Salazar, Iván; Castro-Herrera, Israel; Luna-Izazaga, Gabriela; Sánchez-León, Emilio

    2017-04-01

    Pumping tests remain a method of choice to deduce fundamental aquifer properties and to assess well condition. In the oil and gas (O&G) industry, well testing has been the core technique in examining reservoir behavior over the last 50 years. The pressure derivative by Bourdet, it is perhaps, the most significant single development in the history of well test analysis. Recently, the so-called diagnostics plots (e.g. drawdown and drawdown derivative in a log-log plot) have been successfully tested in aquifers. However, this procedure is still underutilized by groundwater professionals. This research illustrates the applicability range, advantages and drawbacks (e.g. smoothing procedures) of diagnostic plots using field examples from a wide spectrum of tests (short/long tests, constant/variable flow rates, drawdown/buildup stages, pumping well/observation well) in dissimilar geological conditions. We analyze new and pre-existent aquifer tests in Mexico, USA, Canada, Germany, France and Saudi Arabia. In constant flow rate tests, our results show that derivative analysis is an easy, robust and powerful tool to assess near-borehole damage effects, formation heterogeneity, boundaries, flow regimes, infinite-acting radial stages, i.e., valid Theisian framework, and fracture-driven flow. In step tests, the effectiveness relies on high-frequency drawdown measurements. Moreover, we adapt O&G analytical solutions to cater for the conditions in groundwater systems. In this context, further parameters can be computed analytically from the plots, such as skin factor, head losses, wellbore storage, distance to the boundary, channel-aquifer and/or fracture zone width, among others. Therefore, diagnostic plots should be considered a mandatory tool for pumping tests analysis among hydrogeologists. This project has been supported by DGAPA (UNAM) under the research project PAPIIT IN-112815.

  7. Mapping refuse profile in Singapore old dumping ground through electrical resistivity, S-wave velocity and geotechnical monitoring.

    Science.gov (United States)

    Yin, Ke; Tong, Huan Huan; Noh, Omar; Wang, Jing-Yuan; Giannis, Apostolos

    2015-03-01

    The purpose of this study was to track the refuse profile in Lorong Halus Dumping Ground, the largest landfill in Singapore, by electrical resistivity and surface wave velocity after 25 years of closure. Data were analyzed using an orthogonal set of plots by spreading 24 lines in two perpendicular geophone-orientation directions. Both geophysical techniques determined that refuse boundary depth was 13 ± 2 m. The refuse boundary revealed a certain degree of variance, mainly ascribed to the different principle of measurements, as well as the high heterogeneity of the subsurface. Discrepancy was higher in spots with greater heterogeneity. 3D analysis was further conducted detecting refuse pockets, leachate mounding and gas channels. Geotechnical monitoring (borehole) confirmed geophysical outcomes tracing different layers such as soil capping, decomposed refuse materials and inorganic wastes. Combining the geophysical methods with borehole monitoring, a comprehensive layout of the dumping site was presented showing the hot spots of interests.

  8. 'Grounded' Politics

    DEFF Research Database (Denmark)

    Schmidt, Garbi

    2012-01-01

    play within one particular neighbourhood: Nørrebro in the Danish capital, Copenhagen. The article introduces the concept of grounded politics to analyse how groups of Muslim immigrants in Nørrebro use the space, relationships and history of the neighbourhood for identity political statements....... The article further describes how national political debates over the Muslim presence in Denmark affect identity political manifestations within Nørrebro. By using Duncan Bell’s concept of mythscape (Bell, 2003), the article shows how some political actors idealize Nørrebro’s past to contest the present...

  9. Analyses of trawling track and fishing activity based on the data of vessel monitoring system (VMS): A case study of the single otter trawl vessels in the Zhoushan fishing ground

    Science.gov (United States)

    Wang, Yang; Wang, Yingbin; Zheng, Ji

    2015-02-01

    The original purpose of Vessel Monitoring System (VMS) is for enforcement and control of vessel sailing. With the application of VMS in fishing vessels, more and more population dynamic studies have used VMS data to improve the accuracy of fisheries stock assessment. In this paper, we simulated the trawl trajectory under different time intervals using the cubic Hermite spline (cHs) interpolation method based on the VMS data of 8 single otter trawl vessels (totally 36000 data items) fishing in Zhoushan fishing ground from September 2012 to December 2012, and selected the appropriate time interval. We then determined vessels' activities (fishing or non-fishing) by comparing VMS speed data with the corresponding speeds from logbooks. The results showed that the error of simulated trajectory greatly increased with the increase of time intervals of VMS data when they were longer than 30 minutes. Comparing the speeds from VMS with those from the corresponding logbooks, we found that the vessels' speeds were between 2.5 kn and 5.0 kn in fishing. The cHs interpolation method is a new choice for improving the accuracy of estimation of sailing trajectory, and the VMS can be used to determine the vessels' activities with the analysis of their trajectories and speeds. Therefore, when the fishery information is limited, VMS can be one of the important data sources for fisheries stock assessment, and more attention should be paid to its construction and application to fisheries stock assessment and management.

  10. Estimation of above ground biomass in boreal forest using ground-based Lidar

    Science.gov (United States)

    Taheriazad, L.; Moghadas, H.; Sanchez-Azofeifa, A.

    2017-05-01

    Assessing above ground biomass of forest is important for carbon storage monitoring in boreal forest. In this study, a new model is developed to estimate the above ground biomass using ground based Lidar data. 21 trees were measured and scanned across the plot area study in boreal forests of Alberta, Canada. The study area was scanned in the summer season 2014 to quantify the green biomass. The average of total crown biomass and green biomass in this study was 377 kg (standard deviation, S.D. = 243 kg) and 6.42 kg (S.D. = 2.69 m), respectively.

  11. A tool to determine crown and plot canopy transparency for forest inventory and analysis phase 3 plots using digital photographs

    Science.gov (United States)

    Matthew F. Winn; Philip A. Araman

    2012-01-01

    The USDA Forest Service Forest Inventory and Analysis (FIA) program collects crown foliage transparency estimates for individual trees on Phase 3 (P3) inventory plots. The FIA crown foliage estimate is obtained from a pair of perpendicular side views of the tree. Researchers with the USDA Forest Service Southern Research Station have developed a computer program that...

  12. Machine Vision Automation for Ground Control Tele-Robotics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project seeks to advance ground based tele-robotic capabilities with the development of natural feature target tracking technology with the use of machine...

  13. Landscape-scale Ips typographus attack dynamics: from monitoring plots to GIS-based disturbance models

    Directory of Open Access Journals (Sweden)

    Schlyter F

    2011-12-01

    Full Text Available In natural spruce stands, a change of generation is usually initiated by wind or bark beetle disturbances. We combined semi-temporary monitoring plots, remote sensing, and GIS in order to understand and model these processes. Sub plots, called “active”, were located in areas with a high probability of bark beetle or wind disturbances. The optimal location of these plots is usually at an active forest edge, i.e., the zone of maximal change in bark beetle abundance over time, corresponding to the border between wind-damaged or bark beetle-attacked parts and undisturbed parts of a forest stand. The key variable investigated was tree mortality caused by bark beetles. Other variables were similar to those recorded in traditional forest monitoring. Tree defense indicators (resin flow, phenolic compounds and reaction of a tree to bark beetle inoculation were measured. Terrestrial data were then combined with remote sensing data. Time series of satellite images were analyzed in order to define the pattern of wind and bark beetle damages. Weather monitoring data were used for predicting bark beetle and water stress development. All of the information was integrated in a GIS-based system and future bark beetle infestations were predicted. In this paper, we review previous studies and conclude that: (1 the hypotheses of habitat selection (non-host volatiles and semiochemical diversity and location of moderately-stressed host trees are confirmed, although further work about olfactory orientation and host resistance is needed;(2 reactions of trees to bark beetle attack can be predicted by monitoring several parameters, e.g., air temperature and tree physiology; (3 data from ground monitoring can be integrated with GIS and remote sensing systems for bark beetle prognosis and management at the habitat and landscape levels.

  14. Analyses of Trawling Track and Fishing Activity Based on the Data of Vessel Monitoring System (VMS):A Case Study of the Single Otter Trawl Vessels in the Zhoushan Fishing Ground

    Institute of Scientific and Technical Information of China (English)

    WANG Yang; WANG Yingbin; ZHENG Ji

    2015-01-01

    The original purpose of Vessel Monitoring System (VMS) is for enforcement and control of vessel sailing. With the ap-plication of VMS in fishing vessels, more and more population dynamic studies have used VMS data to improve the accuracy of fisheries stock assessment. In this paper, we simulated the trawl trajectory under different time intervals using the cubic Hermite spline (cHs) interpolation method based on the VMS data of 8 single otter trawl vessels (totally 36000 data items) fishing in Zhou-shan fishing ground from September 2012 to December 2012, and selected the appropriate time interval. We then determined vessels’ activities (fishing or non-fishing) by comparing VMS speed data with the corresponding speeds from logbooks. The results showed that the error of simulated trajectory greatly increased with the increase of time intervals of VMS data when they were longer than 30 minutes. Comparing the speeds from VMS with those from the corresponding logbooks, we found that the vessels’ speeds were be-tween 2.5kn and 5.0kn in fishing. The cHs interpolation method is a new choice for improving the accuracy of estimation of sailing trajectory, and the VMS can be used to determine the vessels’ activities with the analysis of their trajectories and speeds. Therefore, when the fishery information is limited, VMS can be one of the important data sources for fisheries stock assessment, and more at-tention should be paid to its construction and application to fisheries stock assessment and management.

  15. A comparison of trenched plot techniques for partitioning soil respiration

    Energy Technology Data Exchange (ETDEWEB)

    Bond-Lamberty, Benjamin; Bronson, Dustin; Bladyka, Emma; Gower, Stith T.

    2011-07-16

    Partitioning the soil surface CO{sub 2} flux (R{sub S}) flux is an important step in understanding ecosystem-level carbon cycling, given that R{sub S} is poorly constrained and its source components may have different responses to climate change. Trenched plots are a classic method of separating the R{sub S} source fluxes, but labor-intensive and may cause considerable disturbance to the soil environment. This study tested if various methods of plant suppression in trenched plots affected R{sub S} fluxes, quantified the R{sub S} response to soil temperature and moisture changes, and estimated the heterotrophic contribution to R{sub S}. It was performed in a boreal black spruce (Picea mariana) plantation, using a complete randomized design, during the 2007 growing season (May-November). Trenched plots had significantly lower R{sub S} than control plots, with differences appearing {approx}100 days after trenching; spatial variability doubled after trenching but then declined throughout the experiment. Most trenching treatments had significantly lower (by {approx}0.5 {mu}mol m{sup -2} s{sup -1}) R{sub S} than the controls, and there was no significant difference in R{sub S} among the various trenching treatments. Soil temperature at 2 cm explained more R{sub S} variability than did 10-cm temperature or soil moisture. Temperature sensitivity (Q10) declined in the control plots from {approx}2.6 (at 5 C) to {approx}1.6 (at 15 C); trenched plots values were higher, from 3.1 at 5 C to 1.9 at 15 C. We estimated R{sub S} for the study period to be 241 {+-} 40 g C m{sup -2}, with roots contributing 64% of R{sub S} after accounting for fine root decay, and 293 g C m{sup -2} for the entire year. These findings suggest that laborious hand weeding of vegetation may be usefully replaced by other methods, easing future studies of this large and poorly-understood carbon flux.

  16. Augmented tracking and acquisition system for GBL satellite illumination

    Science.gov (United States)

    Brodsky, Aaron; Goodrich, Alan; Lawson, David G.; Holm, Richard W.

    1991-08-01

    The Augmented Tracking and Acquisition System (ATAS) provides the tracking acquisition aids, line-of-sight stabilization, and active closed-loop beam centering functions at two ground-based laser tracking sites for the Relay Mirror Experiment (RME). Simultaneous, steady illumination of the RME spacecraft with both ground beacons allows for successful beam relay between the two sites off of the orbiting mirror. Described in this paper is an overview of the functions, control system architectures, major subsystem components (steering mirrors and sensors), and mission operation of the ATAS subsystems. A brief discussion of ATAS evolution is included to show that versatility is needed for success.

  17. Dust Devil Tracks

    Science.gov (United States)

    Reiss, Dennis; Fenton, Lori; Neakrase, Lynn; Zimmerman, Michael; Statella, Thiago; Whelley, Patrick; Rossi, Angelo Pio; Balme, Matthew

    2016-11-01

    Dust devils that leave dark- or light-toned tracks are common on Mars and they can also be found on the Earth's surface. Dust devil tracks (hereinafter DDTs) are ephemeral surface features with mostly sub-annual lifetimes. Regarding their size, DDT widths can range between ˜1 m and ˜1 km, depending on the diameter of dust devil that created the track, and DDT lengths range from a few tens of meters to several kilometers, limited by the duration and horizontal ground speed of dust devils. DDTs can be classified into three main types based on their morphology and albedo in contrast to their surroundings; all are found on both planets: (a) dark continuous DDTs, (b) dark cycloidal DDTs, and (c) bright DDTs. Dark continuous DDTs are the most common type on Mars. They are characterized by their relatively homogenous and continuous low albedo surface tracks. Based on terrestrial and martian in situ studies, these DDTs most likely form when surficial dust layers are removed to expose larger-grained substrate material (coarse sands of ≥500 μm in diameter). The exposure of larger-grained materials changes the photometric properties of the surface; hence leading to lower albedo tracks because grain size is photometrically inversely proportional to the surface reflectance. However, although not observed so far, compositional differences (i.e., color differences) might also lead to albedo contrasts when dust is removed to expose substrate materials with mineralogical differences. For dark continuous DDTs, albedo drop measurements are around 2.5 % in the wavelength range of 550-850 nm on Mars and around 0.5 % in the wavelength range from 300-1100 nm on Earth. The removal of an equivalent layer thickness around 1 μm is sufficient for the formation of visible dark continuous DDTs on Mars and Earth. The next type of DDTs, dark cycloidal DDTs, are characterized by their low albedo pattern of overlapping scallops. Terrestrial in situ studies imply that they are formed when sand

  18. Rationality and Emotionality——On the plot of Pride and Prejudice

    Institute of Scientific and Technical Information of China (English)

    朱正玲

    2009-01-01

    Jane Austen was a writer in the age of rationality.which surely leaves its imprint upon her works Pride and Prejudice.The"pride"and"prejudice"of the heroes and heroines in the novel manifest the fact that they arc rationally-controlled.Such rationality.however,high lights the unusual power of emotionality when the characters finally get married after experiencing complicated love This kind of first-back grounding-emotionality-and-then-foregrounding it plot development in the works displays Austen's profound knowledge of life and her progressive thought surpassing her times.It also represents the characteristics of"the exterior rationalism and the interior romanticism"in her works.

  19. CADASTRAL CLASSIFICATION OF THE LAND PLOTS IN UKRAINE

    Directory of Open Access Journals (Sweden)

    KIRICHEK Yu. O.

    2016-04-01

    Full Text Available Summary. Work concerns development of national system of classification of the land plots. The developed classification will allow to solve correctly a number of the corresponding cadastral, land management, estimated and other tasks. The analysis of classifications of lands, improvements and real estate in general is made. The created offers concerning creation of a new classification of the land plots in Ukraine. Today the Ukrainian real estate market has no single system that separates the system property groups, classes and types. This significantly complicates the work and can not fully be aware of the specific situation of real estate market. This task is designed to solve classification properties, it is used to transition from a diversity of individual properties to a limited number of classes of evaluation objects. The classification is different functional purpose (use facilities assessment, which determines the difference in value.

  20. Losing the Plot: the Geological Anti-Narrative

    Directory of Open Access Journals (Sweden)

    Adelene Buckland

    2010-09-01

    Full Text Available Geology has often been treated by literary critics as the producer narratives of earth history which were appropriated or resisted by novelists and poets. This paper will problematise this tradition by considering a widespread problematisation of plot as a mode of rational enquiry in the nineteenth century, and which underpinned much literary and geological discourse. Rooting itself in elite, fashionable literary culture, geology often resisted plot as a means of unravelling and describing earth history. Briefly considering the reading and the writings of geologists including Adam Sedgwick, William Buckland and Charles Lyell, this essay demonstrates that geology is a much different case in 'science and literature' than the evolutionary sciences explored by Gillian Beer and George Levine.

  1. [Eugenics, an element of the literary plots of dystopia].

    Science.gov (United States)

    Baum, Ewa; Musielak, Michał

    2007-01-01

    The work presents the ideas and assumptions of eugenics, a social philosophy established in 1883 by Francis Galton, which affected the social policies of numerous European countries in the first half of the 20th century. The work shows the effect of eugenics on the literary standards of European prose in the previous century. Two outstanding dystopian novels of the 20th century, The Brave New World by Aldous Huxley and 1984 by George Orwell, situate eugenics as a permanent element of the literary plot of dystopia. Apart from the typical features of this type of novel, for example: personal narration with a trace of irony, a totalitarian state and Newspeak, eugenics is an important element of the literary plot with is aim to exclude and marginalise certain social groups. Eugenics is also one of the main social ideas criticised by both the writers.

  2. Automated drawing of network plots in network meta-analysis.

    Science.gov (United States)

    Rücker, Gerta; Schwarzer, Guido

    2016-03-01

    In systematic reviews based on network meta-analysis, the network structure should be visualized. Network plots often have been drawn by hand using generic graphical software. A typical way of drawing networks, also implemented in statistical software for network meta-analysis, is a circular representation, often with many crossing lines. We use methods from graph theory in order to generate network plots in an automated way. We give a number of requirements for graph drawing and present an algorithm that fits prespecified ideal distances between the nodes representing the treatments. The method was implemented in the function netgraph of the R package netmeta and applied to a number of networks from the literature. We show that graph representations with a small number of crossing lines are often preferable to circular representations.

  3. The Chymistry of "The Learned Dr Plot" (1640-96).

    Science.gov (United States)

    Roos, Anna Marie

    2014-01-01

    In the seventeenth century, there were developing norms of openness in the presentation of scientific knowledge that were at odds with traditions of secrecy among chymists, particularly practitioners of chrysopoeia, or the transmutation of metals. This chapter analyzes how Dr. Robert Plot, the first professor of chymistry at Oxford, negotiated these boundaries within an institutional context. I first delineate his chymical and experimental practice, which incorporated procedures from medieval alchemical sources, particularly the Lullian corpus, as well as more novel practices from seventeenth-century chymistry. Then, I analyze how personal and institutional ambitions and economic considerations shaped to what extent Plot negotiated the boundaries between secrecy and the public dissemination of chymical knowledge.

  4. [Murderers in white coats--the physicians' plot against Stalin].

    Science.gov (United States)

    Olsen, B

    1997-12-10

    During the Moscow trials in 1936-38 several doctors were sentenced for participating in the murders of party leaders. As others who were accused, the doctors willingly confessed to crimes they could not possibly have committed. A second doctors' plot took place in the autumn of 1952. This time nine doctors, six of them Jews, were arrested for the attempted murder of political leaders. Only the unexpected death of Josef Stalin prevented a new wave of terror. With the single exception of Genrikh Grigorjevitsj Jagoda (1891-1938), head of the NKVD (KGB's predecessor), all those sentenced under the Moscow process are now rehabilitated. The participants of the second doctors' plot were rehabilitated immediately after Stalin's death.

  5. Review article: The mountain motif in the plot of Matthew

    Directory of Open Access Journals (Sweden)

    Gert J. Volschenk

    2010-02-01

    Full Text Available This article reviewed T.L. Donaldson’s book, Jesus on the mountain: A study in Matthean theology, published in 1985 by JSOT Press, Sheffield, and focused on the mountain motif in the structure and plot of the Gospel of Matthew, in addition to the work of Donaldson on the mountain motif as a literary motif and as theological symbol. The mountain is a primary theological setting for Jesus’ ministry and thus is an important setting, serving as one of the literary devices by which Matthew structured and progressed his narrative. The Zion theological and eschatological significance and Second Temple Judaism serve as the historical and theological background for the mountain motif. The last mountain setting (Mt 28:16–20 is the culmination of the three theological themes in the plot of Matthew, namely Christology, ecclesiology and salvation history.

  6. Volcano plots in hydrogen electrocatalysis - uses and abuses.

    Science.gov (United States)

    Quaino, Paola; Juarez, Fernanda; Santos, Elizabeth; Schmickler, Wolfgang

    2014-01-01

    Sabatier's principle suggests, that for hydrogen evolution a plot of the rate constant versus the hydrogen adsorption energy should result in a volcano, and several such plots have been presented in the literature. A thorough examination of the data shows, that there is no volcano once the oxide-covered metals are left out. We examine the factors that govern the reaction rate in the light of our own theory and conclude, that Sabatier's principle is only one of several factors that determine the rate. With the exception of nickel and cobalt, the reaction rate does not decrease for highly exothermic hydrogen adsorption as predicted, because the reaction passes through more suitable intermediate states. The case of nickel is given special attention; since it is a 3d metal, its orbitals are compact and the overlap with hydrogen is too low to make it a good catalyst.

  7. Automatic target recognition based on cross-plot.

    Directory of Open Access Journals (Sweden)

    Kelvin Kian Loong Wong

    Full Text Available Automatic target recognition that relies on rapid feature extraction of real-time target from photo-realistic imaging will enable efficient identification of target patterns. To achieve this objective, Cross-plots of binary patterns are explored as potential signatures for the observed target by high-speed capture of the crucial spatial features using minimal computational resources. Target recognition was implemented based on the proposed pattern recognition concept and tested rigorously for its precision and recall performance. We conclude that Cross-plotting is able to produce a digital fingerprint of a target that correlates efficiently and effectively to signatures of patterns having its identity in a target repository.

  8. A Benchmark and Simulator for UAV Tracking

    KAUST Repository

    Mueller, Matthias

    2016-09-16

    In this paper, we propose a new aerial video dataset and benchmark for low altitude UAV target tracking, as well as, a photorealistic UAV simulator that can be coupled with tracking methods. Our benchmark provides the first evaluation of many state-of-the-art and popular trackers on 123 new and fully annotated HD video sequences captured from a low-altitude aerial perspective. Among the compared trackers, we determine which ones are the most suitable for UAV tracking both in terms of tracking accuracy and run-time. The simulator can be used to evaluate tracking algorithms in real-time scenarios before they are deployed on a UAV “in the field”, as well as, generate synthetic but photo-realistic tracking datasets with automatic ground truth annotations to easily extend existing real-world datasets. Both the benchmark and simulator are made publicly available to the vision community on our website to further research in the area of object tracking from UAVs. (https://ivul.kaust.edu.sa/Pages/pub-benchmark-simulator-uav.aspx.). © Springer International Publishing AG 2016.

  9. Extended Recurrence Plot Analysis and its Application to ERP Data

    CERN Document Server

    Marwan, N; Marwan, Norbert; Meinke, Anja

    2004-01-01

    We present new measures of complexity and their application to event related potential data. The new measures base on structures of recurrence plots and makes the identification of chaos-chaos transitions possible. The application of these measures to data from single-trials of the Oddball experiment can identify laminar states therein. This offers a new way of analyzing event-related activity on a single-trial basis.

  10. Dispatching policy for manufacturing jobs and time-delay plots

    OpenAIRE

    2007-01-01

    Abstract In this paper, the concepts of chaos and non-linear dynamics are briefly introduced and the tools used in the characterization of a chaotic or non-linear system are discussed for studying the performance of dispatching policies in manufacturing systems. The scheduling of a simple manufacturing system with the help of common assignment rules has been simulated first. The results are studied and analysed with the help of time-delay plots. Some conclusions are drawn and, base...

  11. Method for detecting software anomalies based on recurrence plot analysis

    OpenAIRE

    Michał Mosdorf

    2012-01-01

    Presented paper evaluates method for detecting software anomalies based on recurrence plot analysis of trace log generated by software execution. Described method for detecting software anomalies is based on windowed recurrence quantification analysis for selected measures (e.g. Recurrence rate - RR or Determinism - DET). Initial results show that proposed method is useful in detecting silent software anomalies that do not result in typical crashes (e.g. exceptions).

  12. Method for detecting software anomalies based on recurrence plot analysis

    Directory of Open Access Journals (Sweden)

    Michał Mosdorf

    2012-03-01

    Full Text Available Presented paper evaluates method for detecting software anomalies based on recurrence plot analysis of trace log generated by software execution. Described method for detecting software anomalies is based on windowed recurrence quantification analysis for selected measures (e.g. Recurrence rate - RR or Determinism - DET. Initial results show that proposed method is useful in detecting silent software anomalies that do not result in typical crashes (e.g. exceptions.

  13. Graphical interpretation of confidence curves in rankit plots.

    Science.gov (United States)

    Hyltoft Petersen, Per; Blaabjerg, Ole; Andersen, Marianne; Jørgensen, Lone G M; Schousboe, Karoline; Jensen, Esther

    2004-01-01

    A well-known transformation from the bell-shaped Gaussian (normal) curve to a straight line in the rankit plot is investigated, and a tool for evaluation of the distribution of reference groups is presented. It is based on the confidence intervals for percentiles of the calculated Gaussian distribution and the percentage of cumulative points exceeding these limits. The process is to rank the reference values and plot the cumulative frequency points in a rankit plot with a logarithmic (In=log(e)) transformed abscissa. If the distribution is close to In-Gaussian the cumulative frequency points will fit to the straight line describing the calculated In-Gaussian distribution. The quality of the fit is evaluated by adding confidence intervals (CI) to each point on the line and calculating the percentage of points outside the hyperbola-like CI-curves. The assumption was that the 95% confidence curves for percentiles would show 5% of points outside these limits. However, computer simulations disclosed that approximate 10% of the series would have 5% or more points outside the limits. This is a conservative validation, which is more demanding than the Kolmogorov-Smirnov test. The graphical presentation, however, makes it easy to disclose deviations from In-Gaussianity, and to make other interpretations of the distributions, e.g., comparison to non-Gaussian distributions in the same plot, where the cumulative frequency percentage can be read from the ordinate. A long list of examples of In-Gaussian distributions of subgroups of reference values from healthy individuals is presented. In addition, distributions of values from well-defined diseased individuals may show up as In-Gaussian. It is evident from the examples that the rankit transformation and simple graphical evaluation for non-Gaussianity is a useful tool for the description of sub-groups.

  14. A MATLAB Function for Plotting Phase Planes Interactively

    OpenAIRE

    Forsman, Krister

    1992-01-01

    A MATLAB-function serving as a sort of graphical interface to the MATLAB ODE-solver ode45 is presented. The main use of it is to facilitate phase plane analysis of nonlinear 2-D systems via simulation. The numerical integration of the system is mouse-operated via the ginput-function. After each choice of initial value a simulation is made and plotted in the phase plane.

  15. How to Create and Manipulate Radar Range-Doppler Plots

    Science.gov (United States)

    2014-12-01

    set of wave fronts with constant wavelength, direction, and relative phase. Electromagnetic waves produced by radar transmitters and lasers are... radars . The Matlab function fft orders its DFT amplitudes in a way that renders negative frequencies positive and greater than the Nyquist frequency. I...UNCLASSIFIED How to Create and Manipulate Radar Range–Doppler Plots Don Koks Cyber & Electronic Warfare Division Defence Science and Technology

  16. Crop residue decomposition in Minnesota biochar amended plots

    Science.gov (United States)

    Weyers, S. L.; Spokas, K. A.

    2014-02-01

    Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different feedstocks and pyrolysis platforms prior to the start of this study. Litterbags containing wheat straw material were buried below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a non-charred wood pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Though no significant impacts were observed with field-weathered biochars, effective soil management may yet have to account for repeat applications of biochar.

  17. The value of building plots in Italy - pdf

    Directory of Open Access Journals (Sweden)

    Paolo Rosato

    2014-12-01

    Full Text Available This paper suggests some analysis on dynamics of building plots value in Italy. This is an important subject, since the study of changes in plots value in space and time enables the evaluation of urban rent, which is essential for a fair and effective planning. The analysis confirm past hypothesis which are well known to real estate market operators. The first resulting fact is that the changes in building plots value are concurrent to those in real estate value and the increase occurring in the last years is in relative terms higher than the past one. This seems to confirm that, during real estate market expansion, most of the increase of buildings’ value is attributable to the land rent. The second observation is about value dynamics over time: it has been observed that, during an expansion in demand, the value significantly increases in central areas, much more than in peripheral ones; this means that absolute rent arising from shortage in urban areas is higher than the differential rent created through urban expansion in peripheral areas. Finally, it was highlighted that the factors affecting the value in building areas play different roles, depending on their location relative to the urban centre, identifying differently structured market segments.

  18. Looking at large data sets using binned data plots

    Energy Technology Data Exchange (ETDEWEB)

    Carr, D.B.

    1990-04-01

    This report addresses the monumental challenge of developing exploratory analysis methods for large data sets. The goals of the report are to increase awareness of large data sets problems and to contribute simple graphical methods that address some of the problems. The graphical methods focus on two- and three-dimensional data and common task such as finding outliers and tail structure, assessing central structure and comparing central structures. The methods handle large sample size problems through binning, incorporate information from statistical models and adapt image processing algorithms. Examples demonstrate the application of methods to a variety of publicly available large data sets. The most novel application addresses the too many plots to examine'' problem by using cognostics, computer guiding diagnostics, to prioritize plots. The particular application prioritizes views of computational fluid dynamics solution sets on the fly. That is, as each time step of a solution set is generated on a parallel processor the cognostics algorithms assess virtual plots based on the previous time step. Work in such areas is in its infancy and the examples suggest numerous challenges that remain. 35 refs., 15 figs.

  19. Train-induced ground vibrations: modeling and experiments

    NARCIS (Netherlands)

    Ditzel, A.

    2003-01-01

    Ground vibrations generated by high-speed trains are of great concern because of the possible damage they can cause to buildings or other structures near the track, and the annoyance to the public living in the vicinity of the track. Particularly in soft-soil regions, where the wave speed is compara

  20. Renewable Energy Tracking Systems

    Science.gov (United States)

    Renewable energy generation ownership can be accounted through tracking systems. Tracking systems are highly automated, contain specific information about each MWh, and are accessible over the internet to market participants.

  1. Forward tracking detectors

    Indian Academy of Sciences (India)

    Klaus Mönig

    2007-11-01

    Forward tracking is an essential part of a detector at the international linear collider (ILC). The requirements for forward tracking are explained and the proposed solutions in the detector concepts are shown.

  2. PROMIS series. Volume 8: Midlatitude ground magnetograms

    Science.gov (United States)

    Fairfield, D. H.; Russell, C. T.

    1990-01-01

    This is the eighth in a series of volumes pertaining to the Polar Region Outer Magnetosphere International Study (PROMIS). This volume contains 24 hour stack plots of 1-minute average, H and D component, ground magnetograms for the period March 10 through June 16, 1986. Nine midlatitude ground stations were selected from the UCLA magnetogram data base that was constructed from all available digitized magnetogram stations. The primary purpose of this publication is to allow users to define universal times and onset longitudes of magnetospheric substorms.

  3. Track classification within wireless sensor network

    Science.gov (United States)

    Doumerc, Robin; Pannetier, Benjamin; Moras, Julien; Dezert, Jean; Canevet, Loic

    2017-05-01

    In this paper, we present our study on track classification by taking into account environmental information and target estimated states. The tracker uses several motion model adapted to different target dynamics (pedestrian, ground vehicle and SUAV, i.e. small unmanned aerial vehicle) and works in centralized architecture. The main idea is to explore both: classification given by heterogeneous sensors and classification obtained with our fusion module. The fusion module, presented in his paper, provides a class on each track according to track location, velocity and associated uncertainty. To model the likelihood on each class, a fuzzy approach is used considering constraints on target capability to move in the environment. Then the evidential reasoning approach based on Dempster-Shafer Theory (DST) is used to perform a time integration of this classifier output. The fusion rules are tested and compared on real data obtained with our wireless sensor network.In order to handle realistic ground target tracking scenarios, we use an autonomous smart computer deposited in the surveillance area. After the calibration step of the heterogeneous sensor network, our system is able to handle real data from a wireless ground sensor network. The performance of this system is evaluated in a real exercise for intelligence operation ("hunter hunt" scenario).

  4. Method of continuous variations: applications of job plots to the study of molecular associations in organometallic chemistry.

    Science.gov (United States)

    Renny, Joseph S; Tomasevich, Laura L; Tallmadge, Evan H; Collum, David B

    2013-11-11

    Applications of the method of continuous variations (MCV or the Method of Job) to problems of interest to organometallic chemists are described. MCV provides qualitative and quantitative insights into the stoichiometries underlying association of m molecules of A and n molecules of B to form A(m)B(n) . Applications to complex ensembles probe associations that form metal clusters and aggregates. Job plots in which reaction rates are monitored provide relative stoichiometries in rate-limiting transition structures. In a specialized variant, ligand- or solvent-dependent reaction rates are dissected into contributions in both the ground states and transition states, which affords insights into the full reaction coordinate from a single Job plot. Gaps in the literature are identified and critiqued.

  5. SOFEPL: A Plotting Postprocessor for ’SOFE’ User’s Manual.

    Science.gov (United States)

    1981-11-01

    area General KPLUSDWork List of plots using Area IPLUSD current run KT (created in PLTNED) PLOT IPlot 1 IA(KLPTP+ 2-1) A AData Area PLOT 2Plot 2 IA...reasons: computer turn-around times for big runs are prohibitively long; a short preliminary evalu- ation of performance is needed before a lot of

  6. ResidPlots-2: Computer Software for IRT Graphical Residual Analyses

    Science.gov (United States)

    Liang, Tie; Han, Kyung T.; Hambleton, Ronald K.

    2009-01-01

    This article discusses the ResidPlots-2, a computer software that provides a powerful tool for IRT graphical residual analyses. ResidPlots-2 consists of two components: a component for computing residual statistics and another component for communicating with users and for plotting the residual graphs. The features of the ResidPlots-2 software are…

  7. Performance of ATLAS tracking

    CERN Document Server

    Roe, Shaun; The ATLAS collaboration

    2017-01-01

    Run-2 of the Large Hadron Collider (LHC) has provided new challenges to track and vertex reconstruction with higher centre-of-mass energies and luminosity leading to increasingly high-multiplicity envi-ronments. This talk provides an overview of the tracking performance, highlighting tracking improvements due to the Insertable B-Layer (IBL) and the introduction of time-dependent alignment.

  8. Plot and Personification in “Tehran-e- Makhuf“

    Directory of Open Access Journals (Sweden)

    M. Pashaei

    Full Text Available Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European account. In some cases, he approaches to story

  9. PET kinetic analysis --pitfalls and a solution for the Logan plot.

    Science.gov (United States)

    Kimura, Yuichi; Naganawa, Mika; Shidahara, Miho; Ikoma, Yoko; Watabe, Hiroshi

    2007-01-01

    The Logan plot is a widely used algorithm for the quantitative analysis of neuroreceptors using PET because it is easy to use and simple to implement. The Logan plot is also suitable for receptor imaging because its algorithm is fast. However, use of the Logan plot, and interpretation of the formed receptor images should be regarded with caution, because noise in PET data causes bias in the Logan plot estimates. In this paper, we describe the basic concept of the Logan plot in detail and introduce three algorithms for the Logan plot. By comparing these algorithms, we demonstrate the pitfalls of the Logan plot and discuss the solution.

  10. Visualisation of gene expression data - the GE-biplot, the Chip-plot and the Gene-plot.

    Science.gov (United States)

    Pittelkow, Yvonne E; Wilson, Susan R

    2003-01-01

    Visualisation methods for exploring microarray data are particularly important for gaining insight into data from gene expression experiments, such as those concerned with the development of an understanding of gene function and interactions. Further, good visualisation techniques are useful for outlier detection in microarray data and for aiding biological interpretation of results, as well as for presentation of overall summaries of the data. The biplot is particularly useful for the display of microarray data as both the genes and the chips can be simultaneously plotted. In this paper we describe several ordination techniques suitable for exploring microarray data, and we call these the GE-biplot, the Chip-plot and the Gene-plot. The general method is first evaluated on synthetic data simulated in accord with current biological interpretation of microarray data. Then it is applied to two well-known data sets, namely the colon data of Alon et al. (1999) and the leukaemia data of Golub et al. (1999). The usefulness of the approach for interpreting and comparing different analyses of the same data is demonstrated.

  11. Networked unattented ground sensors assesment

    Science.gov (United States)

    Bouguereau, Julien; Gattefin, Christian; Dupuy, Gilles

    2003-09-01

    Within the framework of the NATO AC 323 / RTO TG 25 group, relating to advanced concepts of acoustic and seismic technology for military applications, Technical Establishment of Bourges welcomed and organized a joint campaign of experiment intending to demonstrate the interest of a networked unattented ground sensors for vehicles detection and tracking in an area defense context. Having reminded the principle of vehicles tracking, this paper describes the progress of the test campaign and details particularly sensors and participants deployment, the solution of interoperability chosen by the group and the instrumentation used to acquire, network, process and publish in real-time data available during the test: meteorological data, trajectography data and targets detection reports data. Finally, some results of the campaign are presented.

  12. Efficiency of incomplete split-plot designs – a compromise between traditional split-plot designs and randomised complete block design

    OpenAIRE

    Kristensen, Kristian; Bigongiali, Federica; Østergård, Hanne

    2008-01-01

    The paper shows, how incomplete split-plot designs can be constructed from -designs and how they can be analysed. The incomplete split-plot design can be regarded as both a practical and statistical compromise between traditional split-plot design and randomised complete block design. The efficiency of the design is compared to traditional split-plot design and randomised complete block design using data from 5 trials carried out using incomplete split-plot designs in Denmark through 2004-20...

  13. Track finding efficiency in

    Energy Technology Data Exchange (ETDEWEB)

    Allmendinger, T.; Bhuyan, B.; Brown, D. N.; Choi, H.; Christ, S.; Covarelli, R.; Davier, M.; Denig, A. G.; Fritsch, M.; Hafner, A.; Kowalewski, R.; Long, O.; Lutz, A. M.; Martinelli, M.; Muller, D. R.; Nugent, I. M.; Lopes Pegna, D.; Purohit, M. V.; Prencipe, E.; Roney, J. M.; Simi, G.; Solodov, E. P.; Telnov, A. V.; Varnes, E.; Waldi, R.; Wang, W. F.; White, R. M.

    2012-12-10

    We describe several studies to measure the charged track reconstruction efficiency and asymmetry of the BaBar detector. The first two studies measure the tracking efficiency of a charged particle using τ and initial state radiation decays. The third uses the τ decays to study the asymmetry in tracking, the fourth measures the tracking efficiency for low momentum tracks, and the last measures the reconstruction efficiency of K$0\\atop{S}$ particles. The first section also examines the stability of the measurements vs. BaBar running periods.

  14. ISS Asset Tracking Using SAW RFID Technology

    Science.gov (United States)

    Schellhase, Amy; Powers, Annie

    2004-01-01

    A team at the NASA Johnson Space Center (JSC) is undergoing final preparations to test Surface Acoustic Wave (SAW) Radio Frequency Identification (RFID) technology to track assets aboard the International Space Station (ISS). Currently, almost 10,000 U.S. items onboard the ISS are tracked within a database maintained by both the JSC ground teams and crew onboard the ISS. This barcode-based inventory management system has successfully tracked the location of 97% of the items onboard, but its accuracy is dependant on the crew to report hardware movements, taking valuable time away from science and other activities. With the addition of future modules, the volume of inventory to be tracked is expected to increase significantly. The first test of RFID technology on ISS, which will be conducted by the Expedition 16 crew later this year, will evaluate the ability of RFID technology to track consumable items. These consumables, which include office supplies and clothing, are regularly supplied to ISS and can be tagged on the ground. Automation will eliminate line-of-sight auditing requirements, directly saving crew time. This first step in automating an inventory tracking system will pave the way for future uses of RFID for inventory tracking in space. Not only are there immediate benefits for ISS applications, it is a crucial step to ensure efficient logistics support for future vehicles and exploration missions where resupplies are not readily available. Following a successful initial test, the team plans to execute additional tests for new technology, expanded operations concepts, and increased automation.

  15. ISS Asset Tracking Using SAW RFID Technology

    Science.gov (United States)

    Schellhase, Amy; Powers, Annie

    2004-01-01

    A team at the NASA Johnson Space Center (JSC) is undergoing final preparations to test Surface Acoustic Wave (SAW) Radio Frequency Identification (RFID) technology to track assets aboard the International Space Station (ISS). Currently, almost 10,000 U.S. items onboard the ISS are tracked within a database maintained by both the JSC ground teams and crew onboard the ISS. This barcode-based inventory management system has successfully tracked the location of 97% of the items onboard, but its accuracy is dependant on the crew to report hardware movements, taking valuable time away from science and other activities. With the addition of future modules, the volume of inventory to be tracked is expected to increase significantly. The first test of RFID technology on ISS, which will be conducted by the Expedition 16 crew later this year, will evaluate the ability of RFID technology to track consumable items. These consumables, which include office supplies and clothing, are regularly supplied to ISS and can be tagged on the ground. Automation will eliminate line-of-sight auditing requirements, directly saving crew time. This first step in automating an inventory tracking system will pave the way for future uses of RFID for inventory tracking in space. Not only are there immediate benefits for ISS applications, it is a crucial step to ensure efficient logistics support for future vehicles and exploration missions where resupplies are not readily available. Following a successful initial test, the team plans to execute additional tests for new technology, expanded operations concepts, and increased automation.

  16. Advanced Tracking of Vehicles

    DEFF Research Database (Denmark)

    Jensen, Christian Søndergaard; Li, K.-J.; Pakalnis, Stardas

    2005-01-01

    With the continued advances in wireless communications, geo-location technologies, and consumer electronics, it is becoming possible to accurately track the time-varying location of each vehicle in a population of vehicles. This paper reports on ongoing research that has as it objective to develop...... efficient tracking techniques. More specifically, while almost all commercially available tracking solutions simply offer time-based sampling of positions, this paper's techniques aim to offer a guaranteed tracking accuracy for each vehicle at the lowest possible costs, in terms of network traffic...... and server-side updates. This is achieved by designing, prototyping, and testing novel tracking techniques that exploit knowledge of the road network and past movement. These resulting tracking techniques are to support mobile services that rely on the existence of a central server that continuously tracks...

  17. Tracks: Nurses and the Tracking Network

    Centers for Disease Control (CDC) Podcasts

    2012-06-06

    This podcast highlights the utility of the National Environmental Public Health Tracking Network for nurses in a variety of work settings. It features commentary from the American Nurses Association and includes stories from a public health nurse in Massachusetts.  Created: 6/6/2012 by National Center for Environmental Health (NCEH)/Division of Environmental Hazards and Health Effects (DEHHE)/Environmental Health Tracking Branch (EHTB).   Date Released: 6/6/2012.

  18. Plant species richness enhances nitrogen retention in green roof plots.

    Science.gov (United States)

    Johnson, Catherine; Schweinhart, Shelbye; Buffam, Ishi

    2016-10-01

    Vegetated (green) roofs have become common in many cities and are projected to continue to increase in coverage, but little is known about the ecological properties of these engineered ecosystems. In this study, we tested the biodiversity-ecosystem function hypothesis using commercially available green roof trays as replicated plots with varying levels of plant species richness (0, 1, 3, or 6 common green roof species per plot, using plants with different functional characteristics). We estimated accumulated plant biomass near the peak of the first full growing season (July 2013) and measured runoff volume after nearly every rain event from September 2012 to September 2013 (33 events) and runoff fluxes of inorganic nutrients ammonium, nitrate, and phosphate from a subset of 10 events. We found that (1) total plant biomass increased with increasing species richness, (2) green roof plots were effective at reducing storm runoff, with vegetation increasing water retention more than soil-like substrate alone, but there was no significant effect of plant species identity or richness on runoff volume, (3) green roof substrate was a significant source of phosphate, regardless of presence/absence of plants, and (4) dissolved inorganic nitrogen (DIN = nitrate + ammonium) runoff fluxes were different among plant species and decreased significantly with increasing plant species richness. The variation in N retention was positively related to variation in plant biomass. Notably, the increased biomass and N retention with species richness in this engineered ecosystem are similar to patterns observed in published studies from grasslands and other well-studied ecosystems. We suggest that more diverse plantings on vegetated roofs may enhance the retention capacity for reactive nitrogen. This is of importance for the sustained health of vegetated roof ecosystems, which over time often experience nitrogen limitation, and is also relevant for water quality in receiving waters

  19. Crown condition assessment at the CONECOFOR Permanent Monitoring Plots

    Directory of Open Access Journals (Sweden)

    Renzo NIBBI

    2002-09-01

    Full Text Available A detailed crown condition assessment is currently being carried out at the CONECOFOR (CONtrollo ECOsistemi FORestali, Control of Forest Ecosystems plots. The assessment began in 1996, and during the first two years (1996 and 1997 an assessment form based on previous regional experience was used; in 1998 the new official EU form was adopted. The resulting loss of comparability means that only a few indices can be used in the temporal series 1996-1999. Much effort was devoted to Quality Assurance (QA procedures. The QA program is structured as follows: (i specific field manuals have been adopted and are continuously updated; (ii a national training and intercalibration course (NT&IC is undertaken yearly before beginning the assessment campaign;( iii field checks are carried out yearly on a large number of plots. The results of the QA program have shown that for several indices the quality objectives were not reached, but the quality of the data is improving with time. To express the change in crown conditions in each area, a complex index (CCI = Crown Condition Index was adopted. This index is the result of the sum of the relativized values of all the common indices used during the four years. The following parameters were used: transparency, ramification type, leaf colour alteration extension, leaf damage extension, alteration of leaf distension extension. The range within which the CCI fluctuates was evaluated taking into account all the observations carried out at a given plot throughout the years. The number of cases over a given threshold (outliers was calculated for each year. The threshold for outliers was calculated as the median value plus 2 times the range of the interquartile value. All individual cases exceeding this value are considered outliers. The results are presented for all the areas in which the data set is complete for the four years. The yearly fluctuations are discussed and related to possible causes.

  20. An early influence of common ground during speech planning

    NARCIS (Netherlands)

    Vanlangendonck, F.; Willems, R.M.; Menenti, L.M.E.; Hagoort, P.

    2016-01-01

    In order to communicate successfully, speakers have to take into account which information they share with their addressee, i.e. common ground. In the current experiment we investigated how and when common ground affects speech planning by tracking speakers' eye movements while they played a

  1. Driver for solar cell i-v characteristic plots

    Energy Technology Data Exchange (ETDEWEB)

    Turner, G.B.

    1980-01-15

    A bipolar voltage ramp generator applies a linear voltage through a resistor to a solar cell for plotting its current versus voltage (I-v) characteristic between short circuit and open circuit conditions, with automatic stops at the end points. The resistor serves the multiple purpose of providing a current sensing resistor, setting the full-scale current value, and providing a load line with a slope approximately equal to one, such that it will pass through the origin and the approximate center of the i-v curve with about equal distance from that center to each of the end points.

  2. The Alienated Plot in The End of the Road

    Institute of Scientific and Technical Information of China (English)

    王丽娜

    2014-01-01

    The End of the Road is John Barth’s second novel, and it is the first novel that brought abortion to the focus of public attention, which proves to be a huge success. This paper intends to study the alienation in The End of the Road based on the alienation as a literary style and the alienation embodied in the literary context. Through the analysis of the alienated plot, the pa-per aims to emphasize the internal cause for the end of the different character ’s road.

  3. Satellite tracking reveals habitat use by juvenile green sea turtles Chelonia mydas in the Everglades, Florida, USA

    Science.gov (United States)

    Hart, Kristen M.; Fujisaki, Ikuko

    2010-01-01

    We tracked the movements of 6 juvenile green sea turtles captured in coastal areas of southwest Florida within Everglades National Park (ENP) using satellite transmitters for periods of 27 to 62 d in 2007 and 2008 (mean ± SD: 47.7 ± 12.9 d). Turtles ranged in size from 33.4 to 67.5 cm straight carapace length (45.7 ± 12.9 cm) and 4.4 to 40.8 kg in mass (16.0 ± 13.8 kg). These data represent the first satellite tracking data gathered on juveniles of this endangered species at this remote study site, which may represent an important developmental habitat and foraging ground. Satellite tracking results suggested that these immature turtles were resident for several months very close to capture and release sites, in waters from 0 to 10 m in depth. Mean home range for this springtime tracking period as represented by minimum convex polygon (MCP) was 1004.9 ± 618.8 km2 (range 374.1 to 2060.1 km2), with 4 of 6 individuals spending a significant proportion of time within the ENP boundaries in 2008 in areas with dense patches of marine algae. Core use areas determined by 50% kernel density estimates (KDE) ranged from 5.0 to 54.4 km2, with a mean of 22.5 ± 22.1 km2. Overlap of 50% KDE plots for 6 turtles confirmed use of shallow-water nearshore habitats =0.6 m deep within the park boundary. Delineating specific habitats used by juvenile green turtles in this and other remote coastal areas with protected status will help conservation managers to prioritize their efforts and increase efficacy in protecting endangered species.

  4. [Heart rate variability study based on a novel RdR RR Intervals Scatter Plot].

    Science.gov (United States)

    Lu, Hongwei; Lu, Xiuyun; Wang, Chunfang; Hua, Youyuan; Tian, Jiajia; Liu, Shihai

    2014-08-01

    On the basis of Poincare scatter plot and first order difference scatter plot, a novel heart rate variability (HRV) analysis method based on scatter plots of RR intervals and first order difference of RR intervals (namely, RdR) was proposed. The abscissa of the RdR scatter plot, the x-axis, is RR intervals and the ordinate, y-axis, is the difference between successive RR intervals. The RdR scatter plot includes the information of RR intervals and the difference between successive RR intervals, which captures more HRV information. By RdR scatter plot analysis of some records of MIT-BIH arrhythmias database, we found that the scatter plot of uncoupled premature ventricular contraction (PVC), coupled ventricular bigeminy and ventricular trigeminy PVC had specific graphic characteristics. The RdR scatter plot method has higher detecting performance than the Poincare scatter plot method, and simpler and more intuitive than the first order difference method.

  5. Computational Drafting of Plot Structures for Russian Folk Tales.

    Science.gov (United States)

    Gervás, Pablo

    The plots of stories are known to follow general patterns in terms of their overall structure. This was the basic tenet of structuralist approaches to narratology. Vladimir Propp proposed a procedure for the generation of new tales based on his semi-formal description of the structure of Russian folk tales. This is one of the first existing instances of a creative process described procedurally. The present paper revisits Propp's morphology to build a system that generates instances of Russian folk tales. Propp's view of the folk tale as a rigid sequence of character functions is employed as a plot driver, and some issues that Propp declared relevant but did not explore in detail-such as long-range dependencies between functions or the importance of endings-are given computational shape in the context of a broader architecture that captures all the aspects discussed by Propp. A set of simple evaluation metrics for the resulting outputs is defined inspired on Propp's formalism. The potential of the resulting system for providing a creative story generation system is discussed, and possible lines of future work are discussed.

  6. Recurrence plot for parameters analysing of internal combustion engine

    Science.gov (United States)

    Alexa, O.; Ilie, C. O.; Marinescu, M.; Vilau, R.; Grosu, D.

    2015-11-01

    In many technical disciplines modem data analysis techniques has been successfully applied to understand the complexity of the system. The growing volume of theoretical knowledge about systems dynamic's offered researchers the opportunity to look for non-linear dynamics in data whose evolution linear models are unable to explain in a satisfactory manner. One approach in this respect is Recurrence Analysis - RA which is a graphical method designed to locate hidden recurring patterns, nonstationarity and structural changes. RA approach arose in natural sciences like physics and biology but quickly was adopted in economics and engineering. Meanwhile. The fast development of computer resources has provided powerful tools to perform this new and complex model. One free software which was used to perform our analysis is Visual Recurrence Analysis - VRA developed by Eugene Kononov. As is presented in this paper, the recurrence plot investigation for the analyzing of the internal combustion engine shows some of the RPA capabilities in this domain. We chose two specific engine parameters measured in two different tests to perform the RPA. These parameters are injection impulse width and engine angular speed and the tests are I11n and I51n. There were computed graphs for each of them. Graphs were analyzed and compared to obtain a conclusion. This work is an incipient research, being one of the first attempts of using recurrence plot for analyzing automotive dynamics. It opens a wide field of action for future research programs.

  7. Dark-lines in bifurcation plots of nonlinear dynamic systems

    Institute of Scientific and Technical Information of China (English)

    Gao Zhi-Ying; Shen Yun-Wen; Liu Meng-Jun

    2005-01-01

    Based on the regressive character of chaotic motion in nonlinear dynamic systems, a numerical regression algorithm is developed, which can be used to research the dark-lines passing through chaotic regions in bifurcation plots. The dark-lines of the parabolic mapping are obtained by using the numerical regression algorithm, and compared with those that are accurately acquired through dark-line equations. Thus the validity of this algorithm is proved. Furthermore,for the Brussel oscillation system and the piecewise linear dynamic system of a gear pair, the dark-lines are researched by using the regression algorithm. By researching the dark-lines in the bifurcation plots of nonlinear dynamic systems,the periodic windows embedded in chaotic regions can be ascertained by tangential points of dark-lines, and the turning points of chaotic attractors can be also obtained by intersected points. The results show that this algorithm is helpful to analyse dynamic behaviour of systems and control chaotic motion.

  8. Motion Tracking for Medical Imaging: A Non-Visible Structured Light Tracking Approach

    DEFF Research Database (Denmark)

    Olesen, Oline Vinter; Paulsen, Rasmus Reinhold; Højgaard, Liselotte

    2012-01-01

    ) a customized version of this projector replacing a visible light LED with a 850 nm near infrared LED. The latter system does not provide additional discomfort by visible light projection into the patient’s eyes. The main advantage over existing head motion tracking devices, including the Polaris Vicra system......We present a system for head motion tracking in 3D brain imaging. The system is based on facial surface reconstruction and tracking using a structured light (SL) scanning principle. The system is designed to fit into narrow 3D medical scanner geometries limiting the field of view. It is tested...... in a clinical setting on the high resolution research tomograph (HRRT), Siemens PET scanner with a head phantom and volunteers. The SL system is compared to a commercial optical tracking system, the Polaris Vicra system, from NDI based on translatory and rotary ground truth motions of the head phantom...

  9. Raising a highway and a railroad track during intensive mining operations

    Energy Technology Data Exchange (ETDEWEB)

    Kretschmer, W.

    1986-02-01

    In a mine subsidence area, a highway and a railroad track had to be raised by 7,50 m. In order to not exceed a maximum slope in both tracks, the raising operations were carried out in several steps, in accordance with the onset of ground subsidence. At the same time, the operations were not to interfere with the traffic on the four-track autobahn and the two-track railroad line. Simultaneously with the raising operations, the autobahn was enlarged from 4 tracks to 6 + 2 tracks. A local road was destroyed and replaced by a pedestrian and cyclist lane.

  10. Determining team cognition from delay analysis using cross recurrence plot.

    Science.gov (United States)

    Hajari, Nasim; Cheng, Irene; Bin Zheng; Basu, Anup

    2016-08-01

    Team cognition is an important factor in evaluating and determining team performance. Forming a team with good shared cognition is even more crucial for laparoscopic surgery applications. In this study, we analyzed the eye tracking data of two surgeons during a laparoscopic simulation operation, then performed Cross Recurrence Analysis (CRA) on the recorded data to study the delay behaviour for good performer and poor performer teams. Dual eye tracking data for twenty two dyad teams were recorded during a laparoscopic task and then the teams were divided into good performer and poor performer teams based on the task times. Eventually we studied the delay between two team members for good and poor performer teams. The results indicated that the good performer teams show a smaller delay comparing to poor performer teams. This study is compatible with gaze overlap analysis between team members and therefore it is a good evidence of shared cognition between team members.

  11. AUTOMATED TECHNOLOGY FOR CURRENT MAINTENANCE OF RAILWAY TRACK

    Directory of Open Access Journals (Sweden)

    Sychev Vyacheslav Petrovich

    2016-03-01

    Full Text Available In this paper the authors consider the possibility and provide specific solutions to create the automated system of track maintenance on the example of automation of technological operations to restore the equal elasticity of the undersleeper foundation. The relevance of the work stems from the fact that the modern and perspective requirements to the track maintenance in the conditions of the transition to high-speed, high-speed, high-tonnage traffic can be implemented only by switching to a new system of track maintenance based on the performance of work of specialized high-performance machines and on the new system with maximum opportunity for automation technology. More than half of the volume of works on the current maintenance of the tracks are the works on the removal of splashes, straightening and tamping of track, the technology of which can be divided into two components: calculation-evaluation and the generation of control actions on the railway track. Track machines are used extensively at the local bearing places of the occurrence of splashes on track sections or for continuous bearing plot ways to restore the equal elasticity of the undersleeper base and reduce the degree of non-uniformity deviations in rails’ position on level and in plan, as well as track subsidence. The bunker for filling the ballast may be mounted on additional frame or on offset brackets of the machine. The device for measuring the position of a railway track includes the means for measuring the deflections of the road, bending rise the track in the longitudinal profile and the position of the track on level (elevation of one rail in relation to another and the adjacent block determining the actual position of a railway track in plan, in longitudinal profile and on level. The block of determining the amount of ballast consists of interconnected devices for determining the value of shifts and raise of the track and the block of comparing the track raise values

  12. A Trajectory Tracking Control Based on Immune Genetic Fuzzy Neural Sliding Mode for Ground Combat Robot%基于免疫遗传模糊神经滑模的地面作战机器人轨迹跟踪控制

    Institute of Scientific and Technical Information of China (English)

    李郁峰; 李魁武; 潘玉田; 郭保全

    2016-01-01

    提出了一种基于运动学与动力学模型的免疫遗传模糊神经滑模混合控制器用于地面作战机器人的控制。算法中利用径向基神经网络逼近滑模控制的等效部分,并通过免疫遗传算法对径向基神经网络参数进行了优化,滑模控制的增益通过模糊控制策略进行了调节。利用该算法对圆形轨迹进行了跟踪控制仿真及试验分析,与传统的滑模控制相比,该算法能够有效克服系统的不确定性因素的影响,有效抑制了滑模控制中抖振现象,系统的动态轨迹跟踪性能得到了优化。%Based on a kinematic controller and a sliding mode dynamics controller with immune gene-tic algorithm fuzzy neural network,a hybrid control algorithm is presented for ground combat robot. In this algorithm,the equivalent sliding mode control is approached by using radial basis function neural network (RBFNN),and the structure and parameters of RBFNN nonlinear hidden layers are tuned on-line according to immune genetic algorithm for the optimization of the parameters of networks with the gain of sliding mode control adjusted through the adaptive fuzzy systems. Simulation and experimental analysis of the circular trajectory tracking control are carried out by using this algorithm. Compared with the traditional sliding mode control,the proposed controller effectively overcomes the influences of uncertain factors,eliminates chattering of the sliding mode control,and optimizes the dynamic trajecto-ry tracking performance of the system.

  13. On Not Losing Track

    OpenAIRE

    Washburn, A.R.

    1990-01-01

    IEEE Transactions on Automatic Control, Vol. 35, 1990, pp. 852-855. This paper uses tracking time as an explicit objective in designing tracking algorithms that function in clutter. Implications of using "time to the first mistake" as a measure of tracking time are explored. An optimal tracker is derived for a special circukstance where there is clutter, but no measurement error, and is compared to a tracker based on the Maximum Likelihood principle.

  14. Plotting a History: Black and Postcolonial Feminisms in "New Times"

    Science.gov (United States)

    Mirza, Heidi Safia

    2009-01-01

    Black feminist thought is grounded in an understanding of the nature of power and the way black/othered difference women's is systematically organised through social relations. Postcolonial feminist approaches enable us to situate the silent "spectral" power of colonial times as it appears in the production and reproduction of marginalised,…

  15. A Response to Blum's "Diverse" Plot of History.

    Science.gov (United States)

    Stone, Lynda

    1997-01-01

    Comments on Mark Blum's essay on the history of the interpretation of history. Applauds Blum's attempt but draws out problems associated with his argument's grounding in the philosophy of Edmund Husserl and John Toews. Concludes by discussing a new historicism and a need for a postmodern turn in historical interpretation. (DSK)

  16. A Response to Blum's "Diverse" Plot of History.

    Science.gov (United States)

    Stone, Lynda

    1997-01-01

    Comments on Mark Blum's essay on the history of the interpretation of history. Applauds Blum's attempt but draws out problems associated with his argument's grounding in the philosophy of Edmund Husserl and John Toews. Concludes by discussing a new historicism and a need for a postmodern turn in historical interpretation. (DSK)

  17. Information extraction from FN plots of tungsten microemitters

    Energy Technology Data Exchange (ETDEWEB)

    Mussa, Khalil O. [Department of Physics, Mu' tah University, Al-Karak (Jordan); Mousa, Marwan S., E-mail: mmousa@mutah.edu.jo [Department of Physics, Mu' tah University, Al-Karak (Jordan); Fischer, Andreas, E-mail: andreas.fischer@physik.tu-chemnitz.de [Institut für Physik, Technische Universität Chemnitz, Chemnitz (Germany)

    2013-09-15

    Tungsten based microemitter tips have been prepared both clean and coated with dielectric materials. For clean tungsten tips, apex radii have been varied ranging from 25 to 500 nm. These tips were manufactured by electrochemical etching a 0.1 mm diameter high purity (99.95%) tungsten wire at the meniscus of two molar NaOH solution. Composite micro-emitters considered here are consisting of a tungsten core coated with different dielectric materials—such as magnesium oxide (MgO), sodium hydroxide (NaOH), tetracyanoethylene (TCNE), and zinc oxide (ZnO). It is worthwhile noting here, that the rather unconventional NaOH coating has shown several interesting properties. Various properties of these emitters were measured including current–voltage (IV) characteristics and the physical shape of the tips. A conventional field emission microscope (FEM) with a tip (cathode)–screen (anode) separation standardized at 10 mm was used to electrically characterize the electron emitters. The system was evacuated down to a base pressure of ∼10{sup −8}mbar when baked at up to ∼180°C overnight. This allowed measurements of typical field electron emission (FE) characteristics, namely the IV characteristics and the emission images on a conductive phosphorus screen (the anode). Mechanical characterization has been performed through a FEI scanning electron microscope (SEM). Within this work, the mentioned experimental results are connected to the theory for analyzing Fowler–Nordheim (FN) plots. We compared and evaluated the data extracted from clean tungsten tips of different radii and determined deviations between the results of different extraction methods applied. In particular, we derived the apex radii of several clean and coated tungsten tips by both SEM imaging and analyzing FN plots. The aim of this analysis is to support the ongoing discussion on recently developed improvements of the theory for analyzing FN plots related to metal field electron emitters, which in

  18. Measuring and Scaling Evapotranspiration of a Cottonwood Restoration Plot on the Lower Colorado River

    Science.gov (United States)

    Nagler, P. L.; Jetton, A.; Fleming, J. B.; Glenn, E. P.; Erker, J.; Morino, K.; Milliken, J. A.; Gloss, S. P.

    2006-05-01

    Evapotranpsiration (ET) by riparian vegetation is the second largest water user on western U.S. rivers. Efforts are underway to create restoration plots containing native trees such as cottonwood (Populus fremontii) (CW) because they provide valuable wildlife habitat. Up to now, estimates of riparian ET have been based on indirect methods and validation of estimates has been difficult. At Cibola NWR on the Colorado River, we estimated ET for a 20 acre plot of 3 year old CW trees for 50 consecutive days, July 25 - Sept 15, 2005. We measured transpiration rate using sap flow, heat-balance methods to get sap flow on pairs of branches on 20 CW trees. We scaled these ground measurements to high resolution (0.3 m) aerial readings and then to the satellite-level using Landsat ETM+ (30m) and EOS-1 Terra MODIS (250m) pixels. Using regression equations developed in Nagler et al. (2005a,b), we predicted ET at this CW site based on local, maximum air temperatures and ETM+ and MODIS Enhanced Vegetation Index (EVI) data. Sap flow rates ranged from 6 mm d-1 to 10 mm d-1. Results projected by MODIS imagery were similar to rates measured by sap flow sensors. Scaled over the whole plantation, annual ET rates were projected to be 1.33 m yr-1 (4.3 ft yr-1), approximately 50% higher than saltcedar on this river system. We conclude that replacing saltcedar with CW may result in increased water demand and the efficacy in supporting wildlife should be validated before they are widely implemented as a restoration strategy.

  19. Application of machine learning for the evaluation of turfgrass plots using aerial images

    Science.gov (United States)

    Ding, Ke; Raheja, Amar; Bhandari, Subodh; Green, Robert L.

    2016-05-01

    Historically, investigation of turfgrass characteristics have been limited to visual ratings. Although relevant information may result from such evaluations, final inferences may be questionable because of the subjective nature in which the data is collected. Recent advances in computer vision techniques allow researchers to objectively measure turfgrass characteristics such as percent ground cover, turf color, and turf quality from the digital images. This paper focuses on developing a methodology for automated assessment of turfgrass quality from aerial images. Images of several turfgrass plots of varying quality were gathered using a camera mounted on an unmanned aerial vehicle. The quality of these plots were also evaluated based on visual ratings. The goal was to use the aerial images to generate quality evaluations on a regular basis for the optimization of water treatment. Aerial images are used to train a neural network so that appropriate features such as intensity, color, and texture of the turfgrass are extracted from these images. Neural network is a nonlinear classifier commonly used in machine learning. The output of the neural network trained model is the ratings of the grass, which is compared to the visual ratings. Currently, the quality and the color of turfgrass, measured as the greenness of the grass, are evaluated. The textures are calculated using the Gabor filter and co-occurrence matrix. Other classifiers such as support vector machines and simpler linear regression models such as Ridge regression and LARS regression are also used. The performance of each model is compared. The results show encouraging potential for using machine learning techniques for the evaluation of turfgrass quality and color.

  20. DCS Budget Tracking System

    Data.gov (United States)

    Social Security Administration — DCS Budget Tracking System database contains budget information for the Information Technology budget and the 'Other Objects' budget. This data allows for monitoring...

  1. The diagnostic plot analysis of artesian aquifers with case studies in Table Mountain Group of South Africa

    Science.gov (United States)

    Sun, Xiaobin; Xu, Yongxin; Lin, Lixiang

    2015-05-01

    Parameter estimates of artesian aquifers where piezometric head is above ground level are largely made through free-flowing and recovery tests. The straight-line method proposed by Jacob-Lohman is often used for interpretation of flow rate measured at flowing artesian boreholes. However, the approach fails to interpret the free-flowing test data from two artesian boreholes in the fractured-rock aquifer in Table Mountain Group (TMG) of South Africa. The diagnostic plot method using the reciprocal rate derivative is adapted to evaluate the artesian aquifer properties. The variation of the derivative helps not only identify flow regimes and discern the boundary conditions, but also facilitates conceptualization of the aquifer system and selection of an appropriate model for data interpretation later on. Test data from two free-flowing tests conducted in different sites in TMG are analysed using the diagnostic plot method. Based on the results, conceptual models and appropriate approaches are developed to evaluate the aquifer properties. The advantages and limitations of using the diagnostic plot method on free-flowing test data are discussed.

  2. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Bryan, Tom; MacLeod, Todd; Gagliano, Larry

    2016-01-01

    On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

  3. Ground-Based Surveillance and Tracking System (GSTS)

    Science.gov (United States)

    1987-08-01

    reported availabilty of relatively high- paying jobs. The consequences of increased migration could be significant. No significant impacts at U.S. Army...Air Force Base are contributing to overdrawing the aquifers, and at current usage rates the aquifers could be depleted (44). The "Draft Environmental

  4. Tracking Non-stellar Objects on Ground and in Space

    DEFF Research Database (Denmark)

    Riis, Troels; Jørgensen, John Leif

    1999-01-01

    are easily divided into two classes; Stationary (galaxies, nebulae etc.), and moving object (planets, asteroids, satellite etc.).For missions targeting moving objects, detection down to mv 11 is possible without any system impacts, simply by comparing lists of objects with regular intervals, leaving out all......Many space exploration missions require a fast, early and accurate detection of a specific target. E.g. missions to asteroids, x-ray source missions or interplanetary missions.A second generation star tracker may be used for accurate detection of non-stellar objects of interest for such missions......, simply by listing all objects detected in an image not being identified as a star. Of course a lot of deep space objects will be listed too, especially if the detection threshold is set to let faint object pass through. Assuming a detection threshold of, say mv 7 (the Hipparcos catalogue is complete...

  5. View_SPECPR: Software for Plotting Spectra (Installation Manual and User's Guide, Version 1.2)

    Science.gov (United States)

    Kokaly, Raymond F.

    2008-01-01

    This document describes procedures for installing and using the 'View_SPECPR' software system to plot spectra stored in SPECPR (SPECtrum Processing Routines) files. The View_SPECPR software is comprised of programs written in IDL (Interactive Data Language) that run within the ENVI (ENvironment for Visualizing Images) image processing system. SPECPR files are used by earth-remote-sensing scientists and planetary scientists for storing spectra collected by laboratory, field, and remote sensing instruments. A widely distributed SPECPR file is the U.S. Geological Survey (USGS) spectral library that contains thousands of spectra of minerals, vegetation, and man-made materials (Clark and others, 2007). SPECPR files contain reflectance data and associated wavelength and spectral resolution data, as well as meta-data on the time and date of collection and spectrometer settings. Furthermore, the SPECPR file automatically tracks changes to data records through its 'history' fields. For more details on the format and content of SPECPR files, see Clark (1993). For more details on ENVI, see ITT (2008). This program has been updated using an ENVI 4.5/IDL7.0 full license operating on a Windows XP operating system and requires the installation of the iTools components of IDL7.0; however, this program should work with full licenses on UNIX/LINUX systems. This software has not been tested with ENVI licenses on Windows Vista or Apple Operating Systems.

  6. Dalitz plot analysis of the D+ -> K- pi+ pi+ decay

    CERN Document Server

    Bonvicini, G; Dubrovin, M; Lincoln, A; Asner, D M; Edwards, K W; Naik, P; Briere, R A; Ferguson, T; Tatishvili, G; Vogel, H; Watkins, M E; Rosner, J L; Adam, N E; Alexander, J P; Cassel, D G; Duboscq, J E; Ehrlich, R; Fields, L; Gibbons, L; Gray, R; Gray, S W; Hartill, D L; Heltsley, B K; Hertz, D; Jones, C D; Kandaswamy, J; Kreinick, D L; Kuznetsov, V E; Mahlke-Krüger, H; Mohapatra, D; Onyisi, P U E; Patterson, J R; Peterson, D; Riley, D; Ryd, A; Sadoff, A J; Shi, X; Stroiney, S; Sun, W M; Wilksen, T; Athar, S B; Patel, R; Yelton, J; Rubin, P; Eisenstein, B I; Karliner, I; Mehrabyan, S; Lowrey, N; Selen, M; White, E J; Wiss, J; Mitchell, R E; Shepherd, M R; Besson, D; Pedlar, T K; Cronin-Hennessy, D; Gao, K Y; Hietala, J; Kubota, Y; Klein, T; Lang, B W; Poling, R; Scott, A W; Zweber, P; Dobbs, S; Metreveli, Z; Seth, K K; Tomaradze, A G; Ecklund, K M; Love, W; Savinov, V; López, A; Mehrabyan, S; Méndez, H; Ramírez, J; Ge, J Y; Miller, D H; Sanghi, B; Shipsey, I P J; Xin, B; Adams, G S; Anderson, M; Cummings, J P; Danko, I; Hu, D; Moziak, B; Napolitano, J; He, Q; Insler, J; Muramatsu, H; Park, C S; Thorndike, E H; Yang, F; Artuso, M; Blusk, S; Horwitz, N; Khalil, S; Li, J; Menaa, N; Mountain, R; Nisar, S; Randrianarivony, K; Sia, R; Sultana, N; Skwarnicki, T; Stone, S; Wang, J C; Zhang, L M

    2007-01-01

    We present a Dalitz plot analysis of the decay D+ -> K- pi+ pi+ based on 281 pb-1 of e+e- collision data produced at the psi(3770) by CESR and observed with the CLEO-c detector. We select 67086 candidate events with a small, ~1.1%, background for this analysis. When using a simple isobar model our results are consistent with the previous measurements done by E791. Since our sample is considerably larger we can explore alternative models. We find better agreement with data when we include an isospin-two pi+pi+ S-wave contribution. We apply a quasi model-independent partial wave analysis and measure the amplitude and phase of the K pi and pi+pi+ S waves in the range of invariant masses from the threshold to the maximum in this decay.

  7. Dalitz Plot Analysis of Ds+->pi+pi-pi+

    Energy Technology Data Exchange (ETDEWEB)

    Aubert, B.; Bona, M.; Karyotakis, Y.; Lees, J.P.; Poireau, V.; Prencipe, E.; Prudent, X.; Tisserand, V.; /Annecy, LAPP; Garra Tico, J.; Grauges, E.; /Barcelona U., ECM; Lopez, L.; Palano, A.; Pappagallo, M.; /INFN, Bari /Bari U.; Eigen, G.; Stugu, B.; Sun, L.; /Bergen U.; Abrams, G.S.; Battaglia, M.; Brown, D.N.; Cahn, R.N.; Jacobsen, R.G.; /LBL, Berkeley /UC, Berkeley /Birmingham U. /Ruhr U., Bochum /British Columbia U. /Brunel U. /Novosibirsk, IYF /UC, Irvine /UCLA /UC, Riverside /UC, San Diego /UC, Santa Barbara /UC, Santa Cruz /Caltech /Cincinnati U. /Colorado U. /Colorado State U. /Dortmund U. /Dresden, Tech. U. /Ecole Polytechnique /Edinburgh U. /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /Frascati /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /Harvard U. /Heidelberg U. /Humboldt U., Berlin /Imperial Coll., London /Iowa U. /Iowa State U. /Johns Hopkins U. /Orsay, LAL /LLNL, Livermore /Liverpool U. /Queen Mary, U. of London /Royal Holloway, U. of London /Louisville U. /Mainz U., Inst. Kernphys. /Manchester U. /Maryland U. /Massachusetts U., Amherst /MIT, LNS /McGill U. /INFN, Milan /Milan U. /INFN, Milan /INFN, Milan /Milan U. /Mississippi U. /Montreal U. /Mt. Holyoke Coll. /INFN, Naples /Naples U. /INFN, Naples /INFN, Naples /Naples U. /NIKHEF, Amsterdam /Notre Dame U. /Ohio State U. /Oregon U. /INFN, Padua /Padua U. /INFN, Padua /INFN, Padua /Padua U. /Paris U., VI-VII /Pennsylvania U. /INFN, Perugia /Perugia U. /INFN, Pisa /Pisa U. /INFN, Pisa /Pisa, Scuola Normale Superiore /INFN, Pisa /Pisa U. /INFN, Pisa /Princeton U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /Rostock U. /Rutherford /DSM, DAPNIA, Saclay /South Carolina U. /SLAC /Stanford U., Phys. Dept. /SUNY, Albany /Tennessee U. /Texas U. /Texas U., Dallas /INFN, Turin /Turin U. /INFN, Trieste /Trieste U. /Valencia U., IFIC /Victoria U. /Warwick U. /Wisconsin U., Madison

    2009-01-26

    A Dalitz plot analysis of {approx} 13, 000 D{sub s}{sup +} decays to {pi}{sup +}{pi}{sup +}{pi}{sup -} has been performed. A 384 fb{sup -1} data sample, recorded by the BABAR detector at the PEP-II asymmetric-energy e{sup +}e{sup -} storage ring running at center of mass energies near 10.6 GeV, is used. Amplitudes and phases of the intermediate resonances which contribute to this final state are measured. A high precision measurement of the ratio: {Beta}(D{sub s}{sup +} {yields} {pi}{sup +}{pi}{sup +}{pi}{sup -})/{Beta}(D{sub s}{sup +} {yields} K{sup +}K{sup -}{pi}{sup +}) = 0.199 {+-} 0.004 {+-} 0.006 is performed. Using a model independent partial wave analysis the amplitude and phase of the S-wave have been measured.

  8. Dalitz plot analysis of Ds+→π+π-π+

    Science.gov (United States)

    Aubert, B.; Bona, M.; Karyotakis, Y.; Lees, J. P.; Poireau, V.; Prencipe, E.; Prudent, X.; Tisserand, V.; Garra Tico, J.; Grauges, E.; Lopez, L.; Palano, A.; Pappagallo, M.; Eigen, G.; Stugu, B.; Sun, L.; Abrams, G. S.; Battaglia, M.; Brown, D. N.; Jacobsen, R. G.; Kerth, L. T.; Kolomensky, Yu. G.; Lynch, G.; Osipenkov, I. L.; Ronan, M. T.; Tackmann, K.; Tanabe, T.; Hawkes, C. M.; Soni, N.; Watson, A. T.; Koch, H.; Schroeder, T.; Asgeirsson, D. J.; Fulsom, B. G.; Hearty, C.; Mattison, T. S.; McKenna, J. A.; Barrett, M.; Khan, A.; Blinov, V. E.; Bukin, A. D.; Buzykaev, A. R.; Druzhinin, V. P.; Golubev, V. B.; Onuchin, A. P.; Serednyakov, S. I.; Skovpen, Yu. I.; Solodov, E. P.; Todyshev, K. Yu.; Bondioli, M.; Curry, S.; Eschrich, I.; Kirkby, D.; Lankford, A. J.; Lund, P.; Mandelkern, M.; Martin, E. C.; Stoker, D. P.; Abachi, S.; Buchanan, C.; Atmacan, H.; Gary, J. W.; Liu, F.; Long, O.; Vitug, G. M.; Yasin, Z.; Zhang, L.; Sharma, V.; Campagnari, C.; Hong, T. M.; Kovalskyi, D.; Mazur, M. A.; Richman, J. D.; Beck, T. W.; Eisner, A. M.; Flacco, C. J.; Heusch, C. A.; Kroseberg, J.; Lockman, W. S.; Martinez, A. J.; Schalk, T.; Schumm, B. A.; Seiden, A.; Wilson, M. G.; Winstrom, L. O.; Cheng, C. H.; Doll, D. A.; Echenard, B.; Fang, F.; Hitlin, D. G.; Narsky, I.; Piatenko, T.; Porter, F. C.; Andreassen, R.; Mancinelli, G.; Meadows, B. T.; Mishra, K.; Sokoloff, M. D.; Bloom, P. C.; Ford, W. T.; Gaz, A.; Hirschauer, J. F.; Nagel, M.; Nauenberg, U.; Smith, J. G.; Wagner, S. R.; Ayad, R.; Soffer, A.; Toki, W. H.; Wilson, R. J.; Feltresi, E.; Hauke, A.; Jasper, H.; Karbach, M.; Merkel, J.; Petzold, A.; Spaan, B.; Wacker, K.; Kobel, M. J.; Nogowski, R.; Schubert, K. R.; Schwierz, R.; Volk, A.; Bernard, D.; Bonneaud, G. R.; Latour, E.; Verderi, M.; Clark, P. J.; Playfer, S.; Watson, J. E.; Andreotti, M.; Bettoni, D.; Bozzi, C.; Calabrese, R.; Cecchi, A.; Cibinetto, G.; Franchini, P.; Luppi, E.; Negrini, M.; Petrella, A.; Piemontese, L.; Santoro, V.; Baldini-Ferroli, R.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Pacetti, S.; Patteri, P.; Peruzzi, I. M.; Piccolo, M.; Rama, M.; Zallo, A.; Buzzo, A.; Contri, R.; Lo Vetere, M.; Macri, M. M.; Monge, M. R.; Passaggio, S.; Patrignani, C.; Robutti, E.; Santroni, A.; Tosi, S.; Chaisanguanthum, K. S.; Morii, M.; Adametz, A.; Marks, J.; Schenk, S.; Uwer, U.; Bernlochner, F. U.; Klose, V.; Lacker, H. M.; Bard, D. J.; Dauncey, P. D.; Tibbetts, M.; Behera, P. K.; Chai, X.; Charles, M. J.; Mallik, U.; Cochran, J.; Crawley, H. B.; Dong, L.; Meyer, W. T.; Prell, S.; Rosenberg, E. I.; Rubin, A. E.; Gao, Y. Y.; Gritsan, A. V.; Guo, Z. J.; Lae, C. K.; Arnaud, N.; Béquilleux, J.; D'Orazio, A.; Davier, M.; Firmino da Costa, J.; Grosdidier, G.; Le Diberder, F.; Lepeltier, V.; Lutz, A. M.; Pruvot, S.; Roudeau, P.; Schune, M. H.; Serrano, J.; Sordini, V.; Stocchi, A.; Wormser, G.; Lange, D. J.; Wright, D. M.; Bingham, I.; Burke, J. P.; Chavez, C. A.; Fry, J. R.; Gabathuler, E.; Gamet, R.; Hutchcroft, D. E.; Payne, D. J.; Touramanis, C.; Bevan, A. J.; Clarke, C. K.; di Lodovico, F.; Sacco, R.; Sigamani, M.; Cowan, G.; Paramesvaran, S.; Wren, A. C.; Brown, D. N.; Davis, C. L.; Denig, A. G.; Fritsch, M.; Gradl, W.; Alwyn, K. E.; Bailey, D.; Barlow, R. J.; Jackson, G.; Lafferty, G. D.; West, T. J.; Yi, J. I.; Anderson, J.; Chen, C.; Jawahery, A.; Roberts, D. A.; Simi, G.; Tuggle, J. M.; Dallapiccola, C.; Li, X.; Salvati, E.; Saremi, S.; Cowan, R.; Dujmic, D.; Fisher, P. H.; Henderson, S. W.; Sciolla, G.; Spitznagel, M.; Taylor, F.; Yamamoto, R. K.; Zhao, M.; Patel, P. M.; Robertson, S. H.; Lazzaro, A.; Lombardo, V.; Palombo, F.; Bauer, J. M.; Cremaldi, L.; Godang, R.; Kroeger, R.; Summers, D. J.; Zhao, H. W.; Simard, M.; Taras, P.; Nicholson, H.; de Nardo, G.; Lista, L.; Monorchio, D.; Onorato, G.; Sciacca, C.; Raven, G.; Snoek, H. L.; Jessop, C. P.; Knoepfel, K. J.; Losecco, J. M.; Wang, W. F.; Corwin, L. A.; Honscheid, K.; Kagan, H.; Kass, R.; Morris, J. P.; Rahimi, A. M.; Regensburger, J. J.; Sekula, S. J.; Wong, Q. K.; Blount, N. L.; Brau, J.; Frey, R.; Igonkina, O.; Kolb, J. A.; Lu, M.; Rahmat, R.; Sinev, N. B.; Strom, D.; Strube, J.; Torrence, E.; Castelli, G.; Gagliardi, N.; Margoni, M.; Morandin, M.; Posocco, M.; Rotondo, M.; Simonetto, F.; Stroili, R.; Voci, C.; Del Amo Sanchez, P.; Ben-Haim, E.; Briand, H.; Calderini, G.; Chauveau, J.; Hamon, O.; Leruste, Ph.; Ocariz, J.; Perez, A.; Prendki, J.; Sitt, S.; Gladney, L.; Biasini, M.; Manoni, E.; Angelini, C.; Batignani, G.; Bettarini, S.; Carpinelli, M.; Cervelli, A.; Forti, F.; Giorgi, M. A.; Lusiani, A.; Marchiori, G.; Morganti, M.; Neri, N.; Paoloni, E.; Rizzo, G.; Walsh, J. J.; Lopes Pegna, D.; Lu, C.; Olsen, J.; Smith, A. J. S.; Telnov, A. V.; Anulli, F.; Baracchini, E.; Cavoto, G.; Faccini, R.; Ferrarotto, F.; Ferroni, F.

    2009-02-01

    A Dalitz plot analysis of approximately 13 000 Ds+ decays to π+π-π+ has been performed. The analysis uses a 384fb-1 data sample recorded by the BABAR detector at the PEP-II asymmetric-energy e+e- storage ring running at center of mass energies near 10.6 GeV. Amplitudes and phases of the intermediate resonances which contribute to this final state are measured. A high precision measurement of the ratio of branching fractions is performed: B(Ds+→π+π-π+)/B(Ds+→K+K-π+)=0.199±0.004±0.009. Using a model-independent partial wave analysis, the amplitude and phase of the S wave have been measured.

  9. Multiscale recurrence quantification analysis of order recurrence plots

    Science.gov (United States)

    Xu, Mengjia; Shang, Pengjian; Lin, Aijing

    2017-03-01

    In this paper, we propose a new method of multiscale recurrence quantification analysis (MSRQA) to analyze the structure of order recurrence plots. The MSRQA is based on order patterns over a range of time scales. Compared with conventional recurrence quantification analysis (RQA), the MSRQA can show richer and more recognizable information on the local characteristics of diverse systems which successfully describes their recurrence properties. Both synthetic series and stock market indexes exhibit their properties of recurrence at large time scales that quite differ from those at a single time scale. Some systems present more accurate recurrence patterns under large time scales. It demonstrates that the new approach is effective for distinguishing three similar stock market systems and showing some inherent differences.

  10. Recurrence plots and chaotic motion around Kerr black hole

    CERN Document Server

    Kopáček, Ondřej; Karas, Vladimír; Stuchlík, Zdeněk; 10.1063/1.3506071

    2010-01-01

    We study the motion of charged test particles around a Kerr black hole immersed in the asymptotically uniform magnetic field, concluding that off-equatorial stable orbits are allowed in this system. Being interested in dynamical properties of these astrophysically relevant orbits we employ rather novel approach based on the analysis of recurrences of the system to the vicinity of its previous states. We use recurrence plots (RPs) as a tool to visualize recurrences of the trajectory in the phase space. Construction of RPs is simple and straightforward regardless of the dimension of the phase space, which is a major advantage of this approach when compared to the "traditional" methods of the numerical analysis of dynamical systems (for instance the visual survey of Poincar\\'{e} surfaces of section, evaluation of the Lyapunov spectra etc.). We show that RPs and their quantitative measures (obtained from recurrence quantification analysis -- RQA) are powerful tools to detect dynamical regime of motion (regular vs...

  11. Recurrence plots of discrete-time Gaussian stochastic processes

    Science.gov (United States)

    Ramdani, Sofiane; Bouchara, Frédéric; Lagarde, Julien; Lesne, Annick

    2016-09-01

    We investigate the statistical properties of recurrence plots (RPs) of data generated by discrete-time stationary Gaussian random processes. We analytically derive the theoretical values of the probabilities of occurrence of recurrence points and consecutive recurrence points forming diagonals in the RP, with an embedding dimension equal to 1. These results allow us to obtain theoretical values of three measures: (i) the recurrence rate (REC) (ii) the percent determinism (DET) and (iii) RP-based estimation of the ε-entropy κ(ε) in the sense of correlation entropy. We apply these results to two Gaussian processes, namely first order autoregressive processes and fractional Gaussian noise. For these processes, we simulate a number of realizations and compare the RP-based estimations of the three selected measures to their theoretical values. These comparisons provide useful information on the quality of the estimations, such as the minimum required data length and threshold radius used to construct the RP.

  12. B^0 --> K^+ \\pi^- \\pi^0 Dalitz Plot Analysis

    CERN Document Server

    Aubert, B; Abrams, G S; Adye, T; Ahmed, S; Alam, M S; Albert, J; Aleksan, Roy; Allison, J; Allmendinger, T; Altenburg, D; Andreotti, M; Angelini, C; Anulli, F; Aston, D; Azzolini, V; Baak, M; Back, J J; Bailey, S; Baldini-Ferroli, R; Band, H R; Banerjee, Sw; Barate, R; Bard, D J; Barlow, N R; Barlow, R J; Barrett, M; Bartoldus, R; Batignani, G; Bauer, J M; Beck, T W; Behera, P K; Bellini, F; Benayoun, M; Berger, N; Bernard, D; Berryhill, J W; Best, D; Bettarini, S; Bettoni, D; Bevan, A J; Bhimji, W; Bianchi, F; Biasini, M; Blanc, F; Blaylock, G; Blinov, A E; Blinov, V E; Bloom, P; Bóna, M; Bondioli, M; Bonneaud, G R; Borgland, A W; Bosisio, L; Boutigny, D; Bowerman, D A; Boyarski, A M; Boyd, J T; Bozzi, C; Brandenburg, G; Brandt, T; Brau, J E; Breon, A B; Briand, H; Brochard, F; Brose, J; Brown, C L; Brown, C M; Brown, D; Brown, D N; Bruinsma, M; Brunet, S; Bucci, F; Buchanan, C; Buchmüller, O L; Bugg, W; Bulten, H; Burchat, Patricia R; Button-Shafer, J; Buzzo, A; Côté, D; Cahn, R N; Calabrese, R; Calcaterra, A; Calderini, G; Campagnari, C; Capra, R; Carpinelli, M; Cartaro, C; Cavallo, N; Cavoto, G; Chaisanguanthum, K S; Chao, M; Charles, E; Charles, M J; Chauveau, J; Chavez, C A; Chen, A; Chen, E; Chen, J C; Chen, S; Cheng, B; Cheng, C H; Chevalier, N; Christ, S; Cibinetto, G; Clark, P J; Claus, R; Cochran, J; Colecchia, F; Coleman, J P; Contri, R; Convery, M R; Cormack, C M; Cossutti, F; Cottingham, W N; Couderc, F; Covarelli, R; Cowan, G; Cowan, R; Crawley, H B; Cremaldi, L M; Cristinziani, M; Crosetti, G; Çuhadar-Dönszelmann, T; Dahmes, B; Dallapiccola, C; Danielson, N; Dasu, S; Datta, M; Dauncey, P D; David, P; Davier, M; Davis, C L; Day, C T; De Groot, N; De Nardo, Gallieno; Del Buono, L; Della Ricca, G; Di Lodovico, F; Dickopp, M; Dittongo, S; Dong, D; Dorfan, J; Dorigo, A; Druzhinin, V P; Dubitzky, R S; Dubois-Felsmann, G P; Dujmic, D; Dunwoodie, W M; Dvoretskii, A; Eckmann, R; Edwards, A J; Egede, U; Eichenbaum, A M; Eigen, G; Eisner, A M; Elmer, P; Elsen, E E; Emery, S; Ernst, J A; Eschenburg, V; Eschrich, I; Fabozzi, F; Faccini, R; Fan, S; Farbin, A; Feltresi, E; Ferrarotto, F; Ferroni, F; Field, R C; Finocchiaro, G; Flack, R L; Flächer, H U; Flood, K T; Ford, K E; Ford, W T; Forster, I J; Forti, F; Fortin, D; Foulkes, S D; Franek, B J; Frey, R; Fritsch, M; Fry, J R; Gabathuler, Erwin; Gaidot, A; Gaillard, J M; Gaillard, J R; Galeazzi, F; Gallo, F; Gamba, D; Gamet, R; Gan, K K; Ganzhur, S F; Gary, J W; Gaspero, M; Gatto, C; Geddes, N I; Gill, M S; Giorgi, M A; Giraud, P F; Giroux, X; Gladney, L; Glanzman, T; Godang, R; Goetzen, K; Golubev, V B; Gopal, G P; Gowdy, S J; Graham, M; Grancagnolo, S; Green, M G; Greene, M G; Grenier, G J; Grenier, P; Gritsan, A V; Grosdidier, G; Groysman, Y; Guo, Q H; Hadavand, H K; Hadig, T; Haire, M; Halyo, V; Hamel de Monchenault, G; Hamon, O; Harrison, P F; Harrison, T J; Hart, A J; Hart, P A; Hartfiel, B L; Harton, J L; Hast, C; Hauke, A; Hawkes, C M; Hearty, C; Held, T; Hertzbach, S S; Heusch, C A; Hicheur, A; Hill, E J; Hitlin, D G; Höcker, A; Hodgkinson, M C; Hollar, J J; Honscheid, K; Hrynóva, T; Hufnagel, D; Hulsbergen, W D; Hutchcroft, D E; Igonkina, O; Innes, W R; Ivanchenko, V N; Izen, J M; Jackson, P D; Jackson, P S; Jacobsen, R G; Jawahery, A; Jayatilleke, S M; Jessop, C P; John, M J J; Johnson, J R; Judd, D; Kadel, R W; Kadyk, J; Kagan, H; Karyotakis, Yu; Kass, R; Kelly, M P; Kelsey, M H; Kerth, L T; Khan, A; Kim, H; Kim, P; Kirkby, D; Kitayama, I; Knecht, N S; Koch, H; Kocian, M L; Kofler, R; Kolomensky, Yu G; Koptchev, V B; Kovalskyi, D; Kowalewski, R V; Kozanecki, Witold; Kravchenko, E A; Krishnamurthy, M; Kroeger, R; Kroseberg, J; Kukartsev, G; Kutter, P E; Kyberd, P; Lacker, H M; Lae, C K; Lafferty, G D; Lamsa, J; Lanceri, L; Lange, D J; Langenegger, U; Lankford, A J; Laplace, S; Latham, T E; Lau, Y P; Lavin, D; Lazzaro, A; Le Diberder, F R; Lees, J P; Legendre, M; Leith, D W G S; Lepeltier, V; Leruste, P; Lewandowski, B; Li Gioi, L; Li, H; Libby, J; Lillard, V; Lista, L; Liu, R; LoSecco, J M; Lo Vetere, M; Lockman, W S; Lombardo, V; London, G W; Long, O; Lou, X C; Lu, A; Lü, C; Luitz, S; Luppi, E; Lusiani, A; Lüth, V; Lutz, A M; Lynch, G; Lynch, H L; Lyon, A J; MacFarlane, D B; Macri, M; Malcles, J; Mallik, U; Mancinelli, G; Mandelkern, M A; Manfredi, P F; Mangeol, D J J; Marchiori, G; Margoni, M; Marsiske, H; Martínez-Vidal, F; Mattison, T S; Mayer, B; Mazur, M A; Mazzoni, M A; McKenna, J A; McMahon, T R; Meadows, B T; Messner, R; Meyer, T I; Meyer, W T; Miftakov, V; Mihályi, A; Mir, L M; Mohanty, G B; Mohapatra, A K; Mommsen, R K; Monge, M R; Monorchio, D; Moore, T B; Morandin, M; Morgan, S E; Morganti, M; Morganti, S; Morii, M; Morton, G W; Muheim, F; Müller, D R; Müller-Pfefferkorn, R; Narsky, I; Nash, J A; Nauenberg, U; Neal, H; Negrini, M; Neri, N; Nesom, G; Nicholson, H; Nikolich, M B; Nogowski, R; O'Grady, C P; Ocariz, J; Oddone, P J; Ofte, I; Olaiya, E O; Olivas, A; Olsen, J; Onuchin, A P; Orimoto, T J; Otto, S; Ozcan, V E; Paar, H P; Paick, K; Palano, A; Palombo, F; Pan, Y; Panetta, J; Panvini, R S; Paoloni, E; Paolucci, P; Parry, R J; Passaggio, S; Patel, P M; Patrignani, C; Patteri, P; Payne, D J; Pelizaeus, M; Perazzo, A; Perl, M; Peruzzi, I M; Petersen, B A; Petersen, T C; Petrak, S; Petzold, A; Piatenko, T; Piccolo, D; Piccolo, M; Piemontese, L; Pierini, M; Pioppi, M; Piredda, G; Pivk, M; Plaszczynski, S; Playfer, S; Pompili, A; Poropat, P; Porter, F C; Posocco, M; Potter, C T; Prell, S; Prepost, R; Pripstein, M; Pulliam, T; Purohit, M V; Qi, N D; Rahatlou, S; Rahimi, A M; Rama, M; Rankin, P; Ratcliff, B N; Raven, G; Re, V; Reidy, J; Ricciardi, S; Richman, J D; Ritchie, J L; Rizzo, G; Roat, C; Roberts, D A; Robertson, S H; Robutti, E; Roe, N A; Röthel, W; Ronan, Michael T; Roney, J M; Rong, G; Roodman, A; Roos, L; Rosenberg, E I; Rotondo, M; Rubin, A E; Ryd, A; Saeed, M A; Safai-Tehrani, F; Saleem, M; Salnikov, A A; Salvatore, F; Samuel, A; Sanders, D A; Sandrelli, F; Santroni, A; Saremi, S; Sarti, A; Satpathy, A; Schalk, T; Schindler, R H; Schott, G; Schrenk, S; Schubert, J; Schubert, Klaus R; Schumm, B A; Schune, M H; Schwiening, J; Schwierz, R; Schwitters, R F; Sciacca, C; Sciolla, G; Seiden, A; Sekula, S J; Serednyakov, S I; Sharma, V; Shelkov, V G; Shen, B C; Simani, M C; Simi, G; Simonetto, F; Sinev, N B; Skovpen, Yu I; Sloane, R J; Smith, A J S; Smith, J G; Snoek, H L; Snyder, A; Sobie, R J; Soffer, A; Soha, A; Sokoloff, M D; Solodov, E P; Spaan, B; Spanier, S M; Spradlin, P; Stängle, H; Steinke, M; Stelzer, J; Stoker, D P; Stroili, R; Strom, D; Stugu, B; Su, D; Sullivan, M K; Summers, D J; Sundermann, J E; T'Jampens, S; Tan, P; Tantot, L; Taras, P; Taylor, F; Taylor, G P; Telnov, A V; Teodorescu, L; Ter-Antonian, R; Therin, G; Thiebaux, C; Thiessen, D; Tiozzo, G; Tisserand, V; Toki, W H; Torrence, E; Tosi, S; Touramanis, C; Treadwell, E; Vasileiadis, G; Vasseur, G; Vavra, J; Verderi, M; Verkerke, W; Vitale, L; Voci, C; Voena, C; Vuagnin, G; Wagner, G; Wagner, S R; Wagoner, D E; Waldi, R; Walsh, J; Wang, K; Wang, P; Wappler, F R; Watson, A T; Weaver, M; Weidemann, A W; Weinstein, A J R; Wenzel, W A; Wilden, L; Williams, D C; Williams, J C; Willocq, S; Wilson, F F; Wilson, J R; Wilson, M G; Wilson, R J; Winter, M A; Wisniewski, W J; Wittgen, M; Won, E; Wong, Q K; Wormser, G; Wright, D H; Wright, D M; Wu, J; Wu, S L; Xie, Y; Yamamoto, R K; Yang, S; Yarritu, A K; Ye, S; Yéche, C; Yi, J; Young, C C; Yu, Z; Yumiceva, F X; Yushkov, A N; Zallo, A; Zeng, Q; Zghiche, A; Zhang, J; Zhang, L; Zhao, H W; Zhu, Y S; Zito, M; De Sangro, R; Del Re, D; La Vaissière, C de

    2004-01-01

    We present preliminary results on the Dalitz plot analysis of $B^0 \\to K^+ \\pi^- \\pi^0$ decays. The data sample comprises 213 million $\\Upsilon(4S) \\to B {\\bar B}$ decays collected with the BaBar detector at the PEP-II asymmetric-energy $B$ Factory at SLAC. We report measurements of the inclusive branching fraction, quasi-two-body fractions and CP-violating charge asymmetries for intermediate states including $K^*(892)^+ \\pi^-$ and $\\rho(770)^- K^+$. Observations of $B^0$ decays to the $K\\pi$ $S$-wave intermediate states, $K_0^*(1430)^+ \\pi^-$ and $K_0^*(1430)^0 \\pi^0$, are reported. Evidence of the decay $B^0 \\to K^*(892)^0 \\pi^0$ is seen. We set upper limits at 90% confidence level on branching fractions of the nonresonant and other less significant intermediate states.

  13. Dalitz Plot Analysis of Ds to K+K-pi+

    CERN Document Server

    Mitchell, R E

    2009-01-01

    We perform a Dalitz plot analysis of the decay Ds to K+K-pi+ with the CLEO-c data set of 586/pb of e+e- collisions accumulated at sqrt(s) = 4.17 GeV. This corresponds to about 0.57 million D_s+D_s(*)- pairs from which we select 14400 candidates with a background of roughly 15%. In contrast to previous measurements we find good agreement with our data only by including an additional f_0(1370)pi+ contribution. We measure the magnitude, phase, and fit fraction of K*(892) K+, phi(1020)pi+, K0*(1430)K+, f_0(980)pi+, f_0(1710)pi+, and f_0(1370)pi+ contributions and limit the possible contributions of other KK and Kpi resonances that could appear in this decay.

  14. Finding the plot in South African reading education

    Directory of Open Access Journals (Sweden)

    Peter Rule

    2017-01-01

    Full Text Available This article argues that we have lost the plot in South African reading education. To find it, we need to move beyond the predominant mode of reading as oral performance, where the emphasis is on accuracy and pronunciation, to reading as comprehension of meaning in text. While reading research in South Africa has been conducted mainly in school contexts, this case study is of a school and Adult Basic Education and Training Centre in a rural KwaZulu-Natal community near Pietermaritzburg. It found that an oratorical approach to reading dominated in both settings. It suggests that developing the way in which teachers understand the teaching of reading and transforming the teaching practices of those who teach as they were taught in the education system of the apartheid era are key to improving the teaching of reading.

  15. Parallel coordinate plots of maize traits under different magnesium applications

    Institute of Scientific and Technical Information of China (English)

    Jan Bocianowski; Piotr Szulc; Kamila Nowosad

    2015-01-01

    The paral el coordinate plot is proposed as an efifcient tool for visualization of 13 traits of“stay-green”maize (Zea mays L.) cultivar exposed to different methods of magnesium application. The ifeld experiment was conducted in the Department of Agronomy, PoznańUniversity of Life Sciences, on the ifelds of the Department of Teaching and Experimental Station in Swadzim in 2006–2008. Experiment was conducted as a single-factor experiment with seven applications of magnesium in a randomized complete block design with four replicates. The highest mean values of grain yield and 1 000-grain weight were obtained after application of variant T3 of magnesium (10 kg MgO ha–1 soil) in the al three years of study.

  16. Vibrations of a delivery car excited by railway track crossing

    Energy Technology Data Exchange (ETDEWEB)

    Litak, Grzegorz [Department of Applied Mechanics, Lublin University of Technology, Nadbystrzycka 36, PL-20-618 Lublin (Poland); Dipartimento di Architettura, Costruzioni e Strutture, Universita Politecnica delle Marche, Via Brecce Bianche, 60131 Ancona (Italy)], E-mail: g.litak@pollub.pl; Borowiec, Marek [Department of Applied Mechanics, Lublin University of Technology, Nadbystrzycka 36, PL-20-618 Lublin (Poland); Hunicz, Jacek; Koszalka, Grzegorz; Niewczas, Andrzej [Department of Combustion Engines and Transport, Lublin University of Technology, Nadbystrzycka 36, PL-20-618 Lublin (Poland)

    2009-10-15

    Vertical vibrations of a delivery car passing through railway tracks have been investigated in this paper. The application of recurrence plots allows to examine short time series of acceleration non-stationary courses. Recurrence quantification analysis and square deviations estimated in small windows have been used to monitor car vibrations and transient behaviour. Measuring acceleration on the 'sprung' and 'unsprung' masses of a vehicle has enabled also to test the quality of a car suspension.

  17. Plant mycorrhizal traits and carbon fates from plot to globe

    Science.gov (United States)

    Soudzilovskaia, N.; Cornelissen, H. H. C.

    2016-12-01

    Evidence is accumulating that plant traits related to mycorrhizal symbiosis, i.e. mycorrhizal type and the degree of plant root colonization by mycorrhizal fungi have important consequences for carbon pools and allocation in plants and soil. How plant and soil carbon pools vary among vegetation dominated by plants of different mycorrhizal types is a new and exciting research challenge. Absence of global databases on abundance of mycorrhizal fungi in soil and plant roots retards research aimed to understand involvement of mycorrhizas into soil carbon transformation processes. Using own data and published studies we have assembled currently world-largest database of plant species-per-site degrees root colonization by two most common types of mycorrhizal fungi, arbuscular mycorrhizal (AM) and ectomycorrhizal (EM). The database features records for plant root colonization degrees by AM and EM (above 8000 records in total). Using this database, we demonstrate that the degree of mycorrhizal fungal colonization has globally consistent patterns across plant species. This suggests that the level of plant species-specific root colonization can be used as a plant trait. I will discuss how combining plot-level field data, literature data and mycorrhizal infection trait data may help us to quantify the carbon consequences of relative dominance by arbuscular versus ectomycorrhizal symbiosis in vegetation from plot to global scale. To exemplify this method, I will present an assessment of the impacts of EM shrub encroachment on carbon stocks in sub-arctic tundra, and show how the plant trait data (root, leaf, stem and mycorrhizal colonization traits) could predict (1) impacts of AM and EM vegetation on soil carbon budget and (2) changes in soil carbon budget due to increase of EM plants in an AM-dominated ecosystem and visa versa. This approach may help to predict how global change-mediated vegetation shifts, via mycorrhizal carbon pools and dynamics, may affect terrestric and

  18. CWI at TREC 2012, KBA track and Session Track

    NARCIS (Netherlands)

    Araújo, S.; Boscarino, C.; Gebremeskel, G.G.; He, J.; Vries, A.P. de; Voorhees, E.M.; Buckland, L. P.

    2013-01-01

    We participated in two tracks: Knowledge Base Acceleration (KBA) Track and Session Track. In the KBA track, we focused on experi- menting with different approaches as it is the first time the track is launched. We experimented with supervised and unsupervised re- trieval models. Our supervised appro

  19. CWI at TREC 2012, KBA track and Session Track

    NARCIS (Netherlands)

    S. Araújo (Samur); C. Boscarino (Corrado); G.G. Gebremeskel (Gebre); J. He (Jiyin); A.P. de Vries (Arjen)

    2013-01-01

    htmlabstractWe participated in two tracks: Knowledge Base Acceleration (KBA) Track and Session Track. In the KBA track, we focused on experi- menting with different approaches as it is the first time the track is launched. We experimented with supervised and unsupervised re- trieval models. Our supe

  20. Liquid filtration properties in gravel foundation of railroad tracks

    Science.gov (United States)

    Strelkov, A.; Teplykh, S.; Bukhman, N.

    2016-08-01

    Railway bed gravel foundation has a constant permanent impact on urban ecology and ground surface. It is only natural that larger objects, such as railway stations, make broader impact. Surface run-off waters polluted by harmful substances existing in railroad track body (ballast section) flow along railroad tracks and within macadam, go down into subterranean ground flow and then enter neighbouring rivers and water basins. This paper presents analytic calculations and characteristics of surface run-off liquid filtration which flows through gravel multiple layers (railroad track ballast section). The authors analyse liquids with various density and viscosity flowing in multi-layer porous medium. The paper also describes liquid stationary and non-stationary weepage into gravel foundation of railroad tracks.

  1. Relay Mirror Experiment overview: a GBL pointing and tracking demonstration

    Science.gov (United States)

    Dierks, Jeffrey S.; Ross, Susan E.; Brodsky, Aaron; Kervin, Paul W.; Holm, Richard W.

    1991-08-01

    The Relay Mirror Experiment (RME) has successfully demonstrated long-range, low-jitter tracking and pointing capabilities appropriate for ground-based laser (GBL) propagation. The RME program includes (1) a passively maneuverable, free-flying low-orbit spacecraft with a laser diode beacon and spoiled retroreflectors as acquisition aids; (2) a payload experiment package (PEP) consisting of sensors, optics, steerable mirrors, and control electronics. This subsystem accomplishes GBL tracking and pointing and the associated positioning of a space-based relay mirror sufficiently to relay an infrared beam between two ground sites. Design considerations for the control system included base motion disturbance and calibration; (3) two GBL sites each a tracking and pointing exercise in itself, using a combination of sensors and acquisition and tracking capabilities. One site includes a beam relay scoring capability.

  2. Field Plot and Accuracy Assessment Points for Bent's Old Fort National Historic Site Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — Accuracy Assessment, Observation and Plot Points. Plots within the park were identified and sampled in the summer of 2005. In the summer of 2006, randomly selected...

  3. Field Plot and Accuracy Assessment Points for Padre Island National Seashore Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — Accuracy Assessment, Observation and Plot Points. Currently there are NO DATA in this feature class. As of December 2009, a plots database has not been developed and...

  4. Field Plot and Observation Points for Natural Bridges National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This point file displays the 97 field plot and observation points visited in 2003 & 2004 as part of the vegetation mapping project. Sample plots were located...

  5. Field Plot Points Modified for Fort Necessity National Battlefield Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — Locations of vegetation classification sampling plots at Fort Necessity National Battlefield. In this data set, the X, Y coordinates for three plots have been...

  6. Field Plot and Observation Points for Dinosaur National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This point file displays the 727 vegetation plots and 217 observation points visited in 2002, 2003 and 2004 as part of the vegetation mapping project. Plots and...

  7. Circumpolar Arctic vegetation: a hierarchic review and roadmap toward an internationally consistent approach to survey, archive and classify tundra plot data

    Science.gov (United States)

    Walker, D. A.; Daniëls, F. J. A.; Alsos, I.; Bhatt, U. S.; Breen, A. L.; Buchhorn, M.; Bültmann, H.; Druckenmiller, L. A.; Edwards, M. E.; Ehrich, D.; Epstein, H. E.; Gould, W. A.; Ims, R. A.; Meltofte, H.; Raynolds, M. K.; Sibik, J.; Talbot, S. S.; Webber, P. J.

    2016-05-01

    Satellite-derived remote-sensing products are providing a modern circumpolar perspective of Arctic vegetation and its changes, but this new view is dependent on a long heritage of ground-based observations in the Arctic. Several products of the Conservation of Arctic Flora and Fauna are key to our current understanding. We review aspects of the PanArctic Flora, the Circumpolar Arctic Vegetation Map, the Arctic Biodiversity Assessment, and the Arctic Vegetation Archive (AVA) as they relate to efforts to describe and map the vegetation, plant biomass, and biodiversity of the Arctic at circumpolar, regional, landscape and plot scales. Cornerstones for all these tools are ground-based plant-species and plant-community surveys. The AVA is in progress and will store plot-based vegetation observations in a public-accessible database for vegetation classification, modeling, diversity studies, and other applications. We present the current status of the Alaska Arctic Vegetation Archive (AVA-AK), as a regional example for the panarctic archive, and with a roadmap for a coordinated international approach to survey, archive and classify Arctic vegetation. We note the need for more consistent standards of plot-based observations, and make several recommendations to improve the linkage between plot-based observations biodiversity studies and satellite-based observations of Arctic vegetation.

  8. Implementation of an Onboard Visual Tracking System with Small Unmanned Aerial Vehicle (UAV)

    CERN Document Server

    Qadir, Ashraf; Neubert, Jeremiah

    2012-01-01

    This paper presents a visual tracking system that is capable or running real time on-board a small UAV (Unmanned Aerial Vehicle). The tracking system is computationally efficient and invariant to lighting changes and rotation of the object or the camera. Detection and tracking is autonomously carried out on the payload computer and there are two different methods for creation of the image patches. The first method starts detecting and tracking using a stored image patch created prior to flight with previous flight data. The second method allows the operator on the ground to select the interest object for the UAV to track. The tracking system is capable of re-detecting the object of interest in the events of tracking failure. Performance of the tracking system was verified both in the lab and during actual flights of the UAV. Results show that the system can run on-board and track a diverse set of objects in real time.

  9. Comparison of algorithms for finding the air-ground interface in ground penetrating radar signals

    Science.gov (United States)

    Wood, Joshua; Bolton, Jeremy; Casella, George; Collins, Leslie; Gader, Paul; Glenn, Taylor; Ho, Jeffery; Lee, Wen; Mueller, Richard; Smock, Brandon; Torrione, Peter; Watford, Ken; Wilson, Joseph

    2011-06-01

    In using GPR images for landmine detection it is often useful to identify the air-ground interface in the GPR signal for alignment purposes. A number of algorithms have been proposed to solve the air-ground interface detection problem, including some which use only A-scan data, and others which track the ground in B-scans or C-scans. Here we develop a framework for comparing these algorithms relative to one another and we examine the results. The evaluations are performed on data that have been categorized in terms of features that make the air-ground interface difficult to find or track. The data also have associated human selected ground locations, from multiple evaluators, that can be used for determining correctness. A distribution is placed over each of the human selected ground locations, with the sum of these distributions at the algorithm selected location used as a measure of its correctness. Algorithms are also evaluated in terms of how they affect the false alarm and true positive rates of mine detection algorithms that use ground aligned data.

  10. The Use of Satellite Imagery to Guide Field Plot Sampling Scheme for Biomass Estimation in Ghanaian Forest

    Science.gov (United States)

    Sah, B. P.; Hämäläinen, J. M.; Sah, A. K.; Honji, K.; Foli, E. G.; Awudi, C.

    2012-07-01

    Accurate and reliable estimation of biomass in tropical forest has been a challenging task because a large proportion of forests are difficult to access or inaccessible. So, for effective implementation of REDD+ and fair benefit sharing, the proper designing of field plot sampling schemes plays a significant role in achieving robust biomass estimation. The existing forest inventory protocols using various field plot sampling schemes, including FAO's regular grid concept of sampling for land cover inventory at national level, are time and human resource intensive. Wall to wall LiDAR scanning is, however, a better approach to assess biomass with high precision and spatial resolution even though this approach suffers from high costs. Considering the above, in this study a sampling design based on a LiDAR strips sampling scheme has been devised for Ghanaian forests to support field plot sampling. Using Top-of-Atmosphere (TOA) reflectance value of satellite data, Land Use classification was carried out in accordance with IPCC definitions and the resulting classes were further stratified, incorporating existing GIS data of ecological zones in the study area. Employing this result, LiDAR sampling strips were allocated using systematic sampling techniques. The resulting LiDAR strips represented all forest categories, as well as other Land Use classes, with their distribution adequately representing the areal share of each category. In this way, out of at total area of 15,153km2 of the study area, LiDAR scanning was required for only 770 km2 (sampling intensity being 5.1%). We conclude that this systematic LiDAR sampling design is likely to adequately cover variation in above-ground biomass densities and serve as sufficient a-priori data, together with the Land Use classification produced, for designing efficient field plot sampling over the seven ecological zones.

  11. On the Wrong Track?

    Science.gov (United States)

    Gursky, Daniel

    1990-01-01

    Discusses problems with student tracking. Although supporters consider tracking the best way for teachers to handle classroom diversity, many minorities say that it condemns their children to an inferior education. Studies show that heterogeneous classes benefit all students if the teachers adopt flexible instructional methods to handle the…

  12. Can Tracking Improve Learning?

    Science.gov (United States)

    Duflo, Esther; Dupas, Pascaline; Kremer, Michael

    2009-01-01

    Tracking students into different classrooms according to their prior academic performance is controversial among both scholars and policymakers. If teachers find it easier to teach a homogeneous group of students, tracking could enhance school effectiveness and raise test scores of both low- and high-ability students. If students benefit from…

  13. Can Tracking Improve Learning?

    Science.gov (United States)

    Duflo, Esther; Dupas, Pascaline; Kremer, Michael

    2009-01-01

    Tracking students into different classrooms according to their prior academic performance is controversial among both scholars and policymakers. If teachers find it easier to teach a homogeneous group of students, tracking could enhance school effectiveness and raise test scores of both low- and high-ability students. If students benefit from…

  14. Large scale tracking algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Ross L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Love, Joshua Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Melgaard, David Kennett [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Karelitz, David B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pitts, Todd Alan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zollweg, Joshua David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Anderson, Dylan Z. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nandy, Prabal [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Whitlow, Gary L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bender, Daniel A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Byrne, Raymond Harry [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-01-01

    Low signal-to-noise data processing algorithms for improved detection, tracking, discrimination and situational threat assessment are a key research challenge. As sensor technologies progress, the number of pixels will increase signi cantly. This will result in increased resolution, which could improve object discrimination, but unfortunately, will also result in a significant increase in the number of potential targets to track. Many tracking techniques, like multi-hypothesis trackers, suffer from a combinatorial explosion as the number of potential targets increase. As the resolution increases, the phenomenology applied towards detection algorithms also changes. For low resolution sensors, "blob" tracking is the norm. For higher resolution data, additional information may be employed in the detection and classfication steps. The most challenging scenarios are those where the targets cannot be fully resolved, yet must be tracked and distinguished for neighboring closely spaced objects. Tracking vehicles in an urban environment is an example of such a challenging scenario. This report evaluates several potential tracking algorithms for large-scale tracking in an urban environment.

  15. Incentives from Curriculum Tracking

    Science.gov (United States)

    Koerselman, Kristian

    2013-01-01

    Curriculum tracking creates incentives in the years before its start, and we should therefore expect test scores to be higher during those years. I find robust evidence for incentive effects of tracking in the UK based on the UK comprehensive school reform. Results from the Swedish comprehensive school reform are inconclusive. Internationally, I…

  16. Bewegingsvolgsysteem = Monitor tracking system

    NARCIS (Netherlands)

    Slycke, Per Johan; Veltink, Petrus Hermanus; Roetenberg, Daniel

    2006-01-01

    A motion tracking system for tracking an object composed of object parts in a three-dimensional space. The system comprises a number of magnetic field transmitters; a number of field receivers for receiving the magnetic fields of the field transmitters; a number of inertial measurement units for rec

  17. Bewegingsvolgsysteem = Monitor tracking system

    NARCIS (Netherlands)

    Slycke, Per Johan; Veltink, Petrus Hermanus; Roetenberg, Daniel

    2007-01-01

    A motion tracking system for tracking an object composed of object parts in a three-dimensional space. The system comprises a number of magnetic field transmitters; a number of field receivers for receiving the magnetic fields of the field transmitters; a number of inertial measurement units for rec

  18. Eye-Tracking

    Directory of Open Access Journals (Sweden)

    Gabriela GROSSECK

    2006-01-01

    Full Text Available Eye-tracking: one of the newest and most efficient methods of improving on-line marketing communication is called eye-tracking. Marketers have borrowed this technique, usually used in psychological and medical research, in order to study web users with the help of a video camera incorporated in the monitor.

  19. Large scale tracking algorithms.

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Ross L.; Love, Joshua Alan; Melgaard, David Kennett; Karelitz, David B.; Pitts, Todd Alan; Zollweg, Joshua David; Anderson, Dylan Z.; Nandy, Prabal; Whitlow, Gary L.; Bender, Daniel A.; Byrne, Raymond Harry

    2015-01-01

    Low signal-to-noise data processing algorithms for improved detection, tracking, discrimination and situational threat assessment are a key research challenge. As sensor technologies progress, the number of pixels will increase signi cantly. This will result in increased resolution, which could improve object discrimination, but unfortunately, will also result in a significant increase in the number of potential targets to track. Many tracking techniques, like multi-hypothesis trackers, suffer from a combinatorial explosion as the number of potential targets increase. As the resolution increases, the phenomenology applied towards detection algorithms also changes. For low resolution sensors, "blob" tracking is the norm. For higher resolution data, additional information may be employed in the detection and classfication steps. The most challenging scenarios are those where the targets cannot be fully resolved, yet must be tracked and distinguished for neighboring closely spaced objects. Tracking vehicles in an urban environment is an example of such a challenging scenario. This report evaluates several potential tracking algorithms for large-scale tracking in an urban environment.

  20. The quantified self a sociology of self-tracking

    CERN Document Server

    Lupton, Deborah

    2016-01-01

    With the advent of digital devices and software, self-tracking practices have gained new adherents and have spread into a wide array of social domains. The Quantified Self movement has emerged to promote 'self knowledge through numbers'. In this ground-breaking book, Deborah Lupton critically analyses the social, cultural and political dimensions of contemporary self-tracking and identifies the concepts of selfhood, human embodiment and the value of data that underpin them.

  1. Satellite Tracking Astrometric Network (STAN)

    Science.gov (United States)

    Vecchiato, Alberto; Gai, Mario

    2015-08-01

    The possibility of precise orbit tracking and determination of different types of satellites has been explored for at least some 25 years (Arimoto et al., 1990). Proposals in this sense made use mainly of astrometric observations, but multiple tracking techniques combining transfer and laser ranging was also suggested (Guo et al., 2009; Montojo et al., 2011), with different requirements and performances ranging from $\\sim100$~m to tenths of meters.In this work we explore the possible improvements and a novel implementation of a technique relying on large angle, high precision astrometry from ground for the determination of satellite orbits. The concept is based on combined observation of geostationary satellites and other near-Earth space objects from two or more telescopes, applying the triangulation principle over widely separated regions of the sky. An accuracy of a few $10^{-2}$~m can be attained with 1-meter-class telescopes and a field of vied of some arcminutes.We discuss the feasibility of the technique, some of the implementation aspects, and the limitations imposed by atmospheric turbulence. The potential benefits for satellite orbit control and navigation systems are presented, depending on the number and position of the contributing telescopes.We also discuss the possibility that, by reversing the roles of stars and satellites, the same kind of observations can be used for verification and maintenance of astrometric catalogs.

  2. Maintaining a permanent plot data base for growth and yield research: Solutions to some recurring problems

    Science.gov (United States)

    John C. Byrne

    1993-01-01

    Methods for solving some recurring problems of maintaining a permanent plot data base for growth and yield reseuch are described. These methods include documenting data from diverse sampling designs, changing sampling designs, changing field procedures, and coordinating activities in the plots with the land management agency. Managing a permanent plot data base (...

  3. A K-sample Homogeneity Test based on the Quantification of the p-p Plot

    NARCIS (Netherlands)

    J. Hinloopen (Jeroen); R. Wagenvoort (Rien); J.G.M. van Marrewijk (Charles)

    2008-01-01

    textabstractWe propose a quantification of the p-p plot that assigns equal weight to all distances between the respective distributions: the surface between the p-p plot and the diagonal. This surface is labelled the Harmonic Weighted Mass (HWM) index. We introduce the diagonal-deviation (d-d) plot

  4. A K-sample Homogeneity Test based on the Quantification of the p-p Plot

    NARCIS (Netherlands)

    Hinloopen, Jeroen; Wagenvoort, Rien; Marrewijk, van Charles

    2008-01-01

    We propose a quantification of the p-p plot that assigns equal weight to all distances between the respective distributions: the surface between the p-p plot and the diagonal. This surface is labelled the Harmonic Weighted Mass (HWM) index. We introduce the diagonal-deviation (d-d) plot that allows

  5. The influence of fipronil on Reticulitermes flavipes (Isoptera: Rhinotermitidae) feeding beyond treated plots

    Science.gov (United States)

    Thomas Shelton

    2013-01-01

    A small-plot field trial was conducted to examine the area of influence of fipronil at incremental distances away from treated plots on the Harrison Experimental Forest near Saucier, MS. Small treated (water and fipronil) plots were surrounded by untreated wooden boards in an eight-point radial pattern, and examined for evidence of termite feeding every 60 d for 1 yr...

  6. Classification of calorimetric titration plots for alkyltrimethylammonium and alkylpyridinium cationic surfactants in aqueous solutions

    NARCIS (Netherlands)

    Bijma, K; Engberts, J.B.F.N.; Blandamer, M.J; Cullis, P.M.; Last, P.M.; Irlam, K.D.; Soldi, L.G.

    1997-01-01

    Calorimetric titration plots for deaggregation of micelles formed by alkylpyridinium and alkyltrimethylammonium surfactants are classified into three types, A, B and C, depending on the shape of the plot of the enthalpy of dilution as a function of surfactant concentration. For Type A plots the reco

  7. Fitting Data to Model: Structural Equation Modeling Diagnosis Using Two Scatter Plots

    Science.gov (United States)

    Yuan, Ke-Hai; Hayashi, Kentaro

    2010-01-01

    This article introduces two simple scatter plots for model diagnosis in structural equation modeling. One plot contrasts a residual-based M-distance of the structural model with the M-distance for the factor score. It contains information on outliers, good leverage observations, bad leverage observations, and normal cases. The other plot contrasts…

  8. Classification of calorimetric titration plots for alkyltrimethylammonium and alkylpyridinium cationic surfactants in aqueous solutions

    NARCIS (Netherlands)

    Bijma, K; Engberts, J.B.F.N.; Blandamer, M.J; Cullis, P.M.; Last, P.M.; Irlam, K.D.; Soldi, L.G.

    1997-01-01

    Calorimetric titration plots for deaggregation of micelles formed by alkylpyridinium and alkyltrimethylammonium surfactants are classified into three types, A, B and C, depending on the shape of the plot of the enthalpy of dilution as a function of surfactant concentration. For Type A plots the

  9. A K-sample Homogeneity Test based on the Quantification of the p-p Plot

    NARCIS (Netherlands)

    J. Hinloopen (Jeroen); R. Wagenvoort (Rien); J.G.M. van Marrewijk (Charles)

    2008-01-01

    textabstractWe propose a quantification of the p-p plot that assigns equal weight to all distances between the respective distributions: the surface between the p-p plot and the diagonal. This surface is labelled the Harmonic Weighted Mass (HWM) index. We introduce the diagonal-deviation (d-d) plot

  10. A K-sample Homogeneity Test based on the Quantification of the p-p Plot

    NARCIS (Netherlands)

    Hinloopen, Jeroen; Wagenvoort, Rien; Marrewijk, van Charles

    2008-01-01

    We propose a quantification of the p-p plot that assigns equal weight to all distances between the respective distributions: the surface between the p-p plot and the diagonal. This surface is labelled the Harmonic Weighted Mass (HWM) index. We introduce the diagonal-deviation (d-d) plot that allows

  11. Sparse Hashing Tracking.

    Science.gov (United States)

    Zhang, Lihe; Lu, Huchuan; Du, Dandan; Liu, Luning

    2016-02-01

    In this paper, we propose a novel tracking framework based on a sparse and discriminative hashing method. Different from the previous work, we treat object tracking as an approximate nearest neighbor searching process in a binary space. Using the hash functions, the target templates and the candidates can be projected into the Hamming space, facilitating the distance calculation and tracking efficiency. First, we integrate both the inter-class and intra-class information to train multiple hash functions for better classification, while most classifiers in previous tracking methods usually neglect the inter-class correlation, which may cause the inaccuracy. Then, we introduce sparsity into the hash coefficient vectors for dynamic feature selection, which is crucial to select the discriminative and stable features to adapt to visual variations during the tracking process. Extensive experiments on various challenging sequences show that the proposed algorithm performs favorably against the state-of-the-art methods.

  12. TRACKED VEHICLE Rev 75

    Energy Technology Data Exchange (ETDEWEB)

    2007-05-08

    Revision 75 of the Tracked Vehicle software is a soft real-time simulation of a differentially steered, tracked mobile robot, which, because of the track flippers, resembles the iRobot PackBot (http://www.irobot.com/). Open source libraries are used for the physics engine (http://www.ode.org/), the display and user interface (http://www.mathies.com/cpw/), and the program command line and configuration file parameters (http://www.boost.org/). The simulation can be controlled by a USB joystick or the keyboard. The configuration file contains demonstration model parameters of no particular vehicle. This simulation can be used as a starting point for those doing tracked vehicle simulations. This simulation software is essentially a research tool which can be modified and adapted for certain types of tracked vehicle research. An open source license allows an individual researchers to tailor the code to their specific research needs.

  13. Preliminary results of ground-motion characteristics

    Directory of Open Access Journals (Sweden)

    Francesca Bozzoni

    2012-10-01

    Full Text Available The preliminary results are presented herein for the engineering applications of the characteristics of the ground motion induced by the May 20, 2012, Emilia earthquake. Shake maps are computed to provide estimates of the spatial distribution of the induced ground motion. The signals recorded at the Mirandola (MRN station, the closest to the epicenter, have been processed to obtain acceleration, velocity and displacement response spectra. Ground-motion parameters from the MRN recordings are compared with the corresponding estimates from recent ground-motion prediction equations, and with the spectra prescribed by the current Italian Building Code for different return periods. The records from the MRN station are used to plot the particle orbit (hodogram described by the waveform. The availability of results from geotechnical field tests that were performed at a few sites in the Municipality of Mirandola prior to this earthquake of May 2012 has allowed preliminary assessment of the ground response. The amplification effects at Mirandola are estimated using fully stochastic site-response analyses. The seismic input comprises seven actual records that are compatible with the Italian code-based spectrum that refers to a 475-year return period. The computed acceleration response spectrum and the associated dispersion are compared to the spectra calculated from the recordings of the MRN station. Good agreement is obtained for periods up to 1 s, especially for the peak ground acceleration. For the other periods, the spectral acceleration of the MRN recordings exceeds that of the computed spectra.

  14. The physical model of a terraced plot: first results

    Science.gov (United States)

    Perlotto, Chiara; D'Agostino, Vincenzo; Buzzanca, Giacomo

    2017-04-01

    Terrace building have been expanded in the 19th century because of the increased demographic pressure and the need to crop additional areas at steeper slopes. Terraces are also important to regulate the hydrological behavior of the hillslope. Few studies are available in literature on rainfall-runoff processes and flood risk mitigation in terraced areas. Bench terraces, reducing the terrain slope and the length of the overland flow, quantitatively control the runoff flow velocity, facilitating the drainage and thus leading to a reduction of soil erosion. The study of the hydrologic-hydraulic function of terraced slopes is essential in order to evaluate their possible use to cooperate for flood-risk mitigation also preserving the landscape value. This research aims to better focus the times of the hydrological response, which are determined by a hillslope plot bounded by a dry-stone wall, considering both the overland flow and the groundwater. A physical model, characterized by a quasi-real scale, has been built to reproduce the behavior of a 3% outward sloped terrace at bare soil condition. The model consists of a steel metal box (1 m large, 3.3 m long, 2 m high) containing the hillslope terrain. The terrain is equipped with two piezometers, 9 TDR sensors measuring the volumetric water content, a surface spillway at the head releasing the steady discharge under test, a scale at the wall base to measure the outflowing discharge. The experiments deal with different initial moisture condition (non-saturated and saturated), and discharges of 19.5, 12.0 and 5.0 l/min. Each experiment has been replicated, conducting a total number of 12 tests. The volumetric water content analysis produced by the 9 TDR sensors was able to provide a quite satisfactory representation of the soil moisture during the runs. Then, different lag times at the outlet since the inflow initiation were measured both for runoff and groundwater. Moreover, the time of depletion and the piezometer

  15. Statistical Viewer: a tool to upload and integrate linkage and association data as plots displayed within the Ensembl genome browser

    Directory of Open Access Journals (Sweden)

    Hauser Elizabeth R

    2005-04-01

    genes in private data tracks. Statistic View is a novel and powerful visual feature that enhances Ensembl's utility as valuable resource for integrative genomic-based approaches to the identification of candidate disease susceptibility genes. At present there are no other tools that provide for the visualization of 2-dimensional plots of quantitative data scores against genomic coordinates in the context of a primary public genome annotation browser.

  16. Orbit Determination Using Satellite-to-Satellite Tracking Data

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Satellite-to-Satellite Tracking (SST) data can be used to determine the orbits of spacecraft in two ways. One is combined orbit determination, which combines SST data with ground-based tracking data and exploits the enhanced tracking geometry. The other is the autonomous orbit determination, which uses only SST. The latter only fits some particular circumstances since it suffers the rank defect problem in other circumstances. The proof of this statement is presented. The na ture of the problem is also investigated in order to find an effective solution. Several methods of solution are discussed. The feasibility of the methods is demonstrated by their apphcation to a simulation.

  17. Ground water and energy

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    This national workshop on ground water and energy was conceived by the US Department of Energy's Office of Environmental Assessments. Generally, OEA needed to know what data are available on ground water, what information is still needed, and how DOE can best utilize what has already been learned. The workshop focussed on three areas: (1) ground water supply; (2) conflicts and barriers to ground water use; and (3) alternatives or solutions to the various issues relating to ground water. (ACR)

  18. Dalitz plot analysis of B-→D+π-π-

    Science.gov (United States)

    Aubert, B.; Bona, M.; Karyotakis, Y.; Lees, J. P.; Poireau, V.; Prencipe, E.; Prudent, X.; Tisserand, V.; Tico, J. Garra; Grauges, E.; Lopez, L.; Palano, A.; Pappagallo, M.; Eigen, G.; Stugu, B.; Sun, L.; Abrams, G. S.; Battaglia, M.; Brown, D. N.; Jacobsen, R. G.; Kerth, L. T.; Kolomensky, Yu. G.; Lynch, G.; Osipenkov, I. L.; Ronan, M. T.; Tackmann, K.; Tanabe, T.; Hawkes, C. M.; Soni, N.; Watson, A. T.; Koch, H.; Schroeder, T.; Asgeirsson, D. J.; Fulsom, B. G.; Hearty, C.; Mattison, T. S.; McKenna, J. A.; Barrett, M.; Khan, A.; Blinov, V. E.; Bukin, A. D.; Buzykaev, A. R.; Druzhinin, V. P.; Golubev, V. B.; Onuchin, A. P.; Serednyakov, S. I.; Skovpen, Yu. I.; Solodov, E. P.; Todyshev, K. Yu.; Bondioli, M.; Curry, S.; Eschrich, I.; Kirkby, D.; Lankford, A. J.; Lund, P.; Mandelkern, M.; Martin, E. C.; Stoker, D. P.; Abachi, S.; Buchanan, C.; Atmacan, H.; Gary, J. W.; Liu, F.; Long, O.; Vitug, G. M.; Yasin, Z.; Zhang, L.; Sharma, V.; Campagnari, C.; Hong, T. M.; Kovalskyi, D.; Mazur, M. A.; Richman, J. D.; Beck, T. W.; Eisner, A. M.; Flacco, C. J.; Heusch, C. A.; Kroseberg, J.; Lockman, W. S.; Martinez, A. J.; Schalk, T.; Schumm, B. A.; Seiden, A.; Wilson, M. G.; Winstrom, L. O.; Cheng, C. H.; Doll, D. A.; Echenard, B.; Fang, F.; Hitlin, D. G.; Narsky, I.; Piatenko, T.; Porter, F. C.; Andreassen, R.; Mancinelli, G.; Meadows, B. T.; Mishra, K.; Sokoloff, M. D.; Bloom, P. C.; Ford, W. T.; Gaz, A.; Hirschauer, J. F.; Nagel, M.; Nauenberg, U.; Smith, J. G.; Wagner, S. R.; Ayad, R.; Soffer, A.; Toki, W. H.; Wilson, R. J.; Feltresi, E.; Hauke, A.; Jasper, H.; Karbach, M.; Merkel, J.; Petzold, A.; Spaan, B.; Wacker, K.; Kobel, M. J.; Nogowski, R.; Schubert, K. R.; Schwierz, R.; Volk, A.; Bernard, D.; Bonneaud, G. R.; Latour, E.; Verderi, M.; Clark, P. J.; Playfer, S.; Watson, J. E.; Andreotti, M.; Bettoni, D.; Bozzi, C.; Calabrese, R.; Cecchi, A.; Cibinetto, G.; Franchini, P.; Luppi, E.; Negrini, M.; Petrella, A.; Piemontese, L.; Santoro, V.; Baldini-Ferroli, R.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Pacetti, S.; Patteri, P.; Peruzzi, I. M.; Piccolo, M.; Rama, M.; Zallo, A.; Buzzo, A.; Contri, R.; Lo Vetere, M.; Macri, M. M.; Monge, M. R.; Passaggio, S.; Patrignani, C.; Robutti, E.; Santroni, A.; Tosi, S.; Chaisanguanthum, K. S.; Morii, M.; Adametz, A.; Marks, J.; Schenk, S.; Uwer, U.; Klose, V.; Lacker, H. M.; Bard, D. J.; Dauncey, P. D.; Tibbetts, M.; Behera, P. K.; Chai, X.; Charles, M. J.; Mallik, U.; Cochran, J.; Crawley, H. B.; Dong, L.; Meyer, W. T.; Prell, S.; Rosenberg, E. I.; Rubin, A. E.; Gao, Y. Y.; Gritsan, A. V.; Guo, Z. J.; Lae, C. K.; Arnaud, N.; Béquilleux, J.; D'Orazio, A.; Davier, M.; da Costa, J. Firmino; Grosdidier, G.; Le Diberder, F.; Lepeltier, V.; Lutz, A. M.; Pruvot, S.; Roudeau, P.; Schune, M. H.; Serrano, J.; Sordini, V.; Stocchi, A.; Wormser, G.; Lange, D. J.; Wright, D. M.; Bingham, I.; Burke, J. P.; Chavez, C. A.; Fry, J. R.; Gabathuler, E.; Gamet, R.; Hutchcroft, D. E.; Payne, D. J.; Touramanis, C.; Bevan, A. J.; Clarke, C. K.; di Lodovico, F.; Sacco, R.; Sigamani, M.; Cowan, G.; Paramesvaran, S.; Wren, A. C.; Brown, D. N.; Davis, C. L.; Denig, A. G.; Fritsch, M.; Gradl, W.; Alwyn, K. E.; Bailey, D.; Barlow, R. J.; Jackson, G.; Lafferty, G. D.; West, T. J.; Yi, J. I.; Anderson, J.; Chen, C.; Jawahery, A.; Roberts, D. A.; Simi, G.; Tuggle, J. M.; Dallapiccola, C.; Li, X.; Salvati, E.; Saremi, S.; Cowan, R.; Dujmic, D.; Fisher, P. H.; Henderson, S. W.; Sciolla, G.; Spitznagel, M.; Taylor, F.; Yamamoto, R. K.; Zhao, M.; Patel, P. M.; Robertson, S. H.; Lazzaro, A.; Lombardo, V.; Palombo, F.; Bauer, J. M.; Cremaldi, L.; Godang, R.; Kroeger, R.; Summers, D. J.; Zhao, H. W.; Simard, M.; Taras, P.; Nicholson, H.; de Nardo, G.; Lista, L.; Monorchio, D.; Onorato, G.; Sciacca, C.; Raven, G.; Snoek, H. L.; Jessop, C. P.; Knoepfel, K. J.; Losecco, J. M.; Wang, W. F.; Corwin, L. A.; Honscheid, K.; Kagan, H.; Kass, R.; Morris, J. P.; Rahimi, A. M.; Regensburger, J. J.; Sekula, S. J.; Wong, Q. K.; Blount, N. L.; Brau, J.; Frey, R.; Igonkina, O.; Kolb, J. A.; Lu, M.; Rahmat, R.; Sinev, N. B.; Strom, D.; Strube, J.; Torrence, E.; Castelli, G.; Gagliardi, N.; Margoni, M.; Morandin, M.; Posocco, M.; Rotondo, M.; Simonetto, F.; Stroili, R.; Voci, C.; Del Amo Sanchez, P.; Ben-Haim, E.; Briand, H.; Calderini, G.; Chauveau, J.; Hamon, O.; Leruste, Ph.; Ocariz, J.; Perez, A.; Prendki, J.; Sitt, S.; Gladney, L.; Biasini, M.; Manoni, E.; Angelini, C.; Batignani, G.; Bettarini, S.; Carpinelli, M.; Cervelli, A.; Forti, F.; Giorgi, M. A.; Lusiani, A.; Marchiori, G.; Morganti, M.; Neri, N.; Paoloni, E.; Rizzo, G.; Walsh, J. J.; Lopes Pegna, D.; Lu, C.; Olsen, J.; Smith, A. J. S.; Telnov, A. V.; Anulli, F.; Baracchini, E.; Cavoto, G.; Faccini, R.; Ferrarotto, F.; Ferroni, F.; Gaspero, M.

    2009-06-01

    We report on a Dalitz plot analysis of B-→D+π-π- decays, based on a sample of about 383×106 Υ(4S)→B Bmacr decays collected with the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC. We find the total branching fraction of the three-body decay: B(B-→D+π-π-)=(1.08±0.03±0.05)×10-3. We observe the established D2*0 and confirm the existence of D0*0 in their decays to D+π-, where the D2*0 and D0*0 are the 2+ and 0+c umacr P-wave states, respectively. We measure the masses and widths of D2*0 and D0*0 to be: mD2*0=(2460.4±1.2±1.2±1.9)MeV/c2, ΓD2*0=(41.8±2.5±2.1±2.0)MeV, mD0*0=(2297±8±5±19)MeV/c2, and ΓD0*0=(273±12±17±45)MeV. The stated errors reflect the statistical and systematic uncertainties, and the uncertainty related to the assumed composition of signal events and the theoretical model.

  19. Automated quantification of the synchrogram by recurrence plot analysis.

    Science.gov (United States)

    Nguyen, Chinh Duc; Wilson, Stephen James; Crozier, Stuart

    2012-04-01

    Recently, the concept of phase synchronization of two weakly coupled oscillators has raised a great research interest and has been applied to characterize synchronization phenomenon in physiological data. Phase synchronization of cardiorespiratory coupling is often studied by a synchrogram analysis, a graphical tool investigating the relationship between instantaneous phases of two signals. Although several techniques have been proposed to automatically quantify the synchrogram, most of them require a preselection of a phase-locking ratio by trial and error. One technique does not require this information; however, it is based on the power spectrum of phase's distribution in the synchrogram, which is vulnerable to noise. This study aims to introduce a new technique to automatically quantify the synchrogram by studying its dynamic structure. Our technique exploits recurrence plot analysis, which is a well-established tool for characterizing recurring patterns and nonstationarities in experiments. We applied our technique to detect synchronization in simulated and measured infants' cardiorespiratory data. Our results suggest that the proposed technique is able to systematically detect synchronization in noisy and chaotic data without preselecting the phase-locking ratio. By embedding phase information of the synchrogram into phase space, the phase-locking ratio is automatically unveiled as the number of attractors.

  20. The imprint of exile through the plot of the narratives

    Directory of Open Access Journals (Sweden)

    Silvia Dutrénit Bielous

    2010-06-01

    Full Text Available Exile is a circumstance different from other migrations, although it resembles them in the possible insertion or alienation from the receiving society. It is with no a doubt a forced migration process which is always accompanied by an idea and an imaginary: the disappearrance of the conditions that forced to exile and thus, the return.Although it is not possible to generalize, because there is no one single experience of exile and the subjectivities that compose it are diverse, it undoubtedly produces a sensation of alienation, which can lead to the rejection of the cultural norms of society; it is part of a process of “being in one place, but thinking about another.” However, as exile is prolonged, the experience of adaptation for the different generations involved becomes diversified, communication vessels develop, feelings of inclusion, of adaptation, of attachment with the social and cultural environment that the place of refuge offered.The present text builds on testimonies of Uruguayans exiled in Mexico who have returned to their country. In their narrative, the meanings that relate to the subjective perspective that provoked the “return” to their country of origin as being viable and a palpable event are perceived. In summary, an incursion through the testimonial plot explains to what extent the return is a recovery of the space of identity longed for and the subsequent abandonment of the foreign space, in other words, it adds to the perspective of identity as a dynamic and relational construction.

  1. High-speed digital phonoscopy images analyzed by Nyquist plots

    Science.gov (United States)

    Yan, Yuling

    2012-02-01

    Vocal-fold vibration is a key dynamic event in voice production, and the vibratory characteristics of the vocal fold correlate closely with voice quality and health condition. Laryngeal imaging provides direct means to observe the vocal fold vibration; in the past, however, available modalities were either too slow or impractical to resolve the actual vocal fold vibrations. This limitation has now been overcome by high-speed digital imaging (HSDI) (or high-speed digital phonoscopy), which records images of the vibrating vocal folds at a rate of 2000 frames per second or higher- fast enough to resolve a specific, sustained phonatory vocal fold vibration. The subsequent image-based functional analysis of voice is essential to better understanding the mechanism underlying voice production, as well as assisting the clinical diagnosis of voice disorders. Our primary objective is to develop a comprehensive analytical platform for voice analysis using the HSDI recordings. So far, we have developed various analytical approaches for the HSDI-based voice analyses. These include Nyquist plots and associated analysese that are used along with FFT and Spectrogram in the analysis of the HSDI data representing normal voice and specific voice pathologies.

  2. Applying manifold learning to plotting approximate contour trees.

    Science.gov (United States)

    Takahashi, Shigeo; Fujishiro, Issei; Okada, Masato

    2009-01-01

    A contour tree is a powerful tool for delineating the topological evolution of isosurfaces of a single-valued function, and thus has been frequently used as a means of extracting features from volumes and their time-varying behaviors. Several sophisticated algorithms have been proposed for constructing contour trees while they often complicate the software implementation especially for higher-dimensional cases such as time-varying volumes. This paper presents a simple yet effective approach to plotting in 3D space, approximate contour trees from a set of scattered samples embedded in the high-dimensional space. Our main idea is to take advantage of manifold learning so that we can elongate the distribution of high-dimensional data samples to embed it into a low-dimensional space while respecting its local proximity of sample points. The contribution of this paper lies in the introduction of new distance metrics to manifold learning, which allows us to reformulate existing algorithms as a variant of currently available dimensionality reduction scheme. Efficient reduction of data sizes together with segmentation capability is also developed to equip our approach with a coarse-to-fine analysis even for large-scale datasets. Examples are provided to demonstrate that our proposed scheme can successfully traverse the features of volumes and their temporal behaviors through the constructed contour trees.

  3. Dalitz plot analysis of $B\\to DDK$ decays

    CERN Document Server

    Purohit, Milind V

    2015-01-01

    We present Dalitz plot analyses for the decays of $B$ mesons to $D^-D^0K^+$ and $\\overline{D}^0D^0K^+$. [Charge conjugate reactions are implicitly assumed throughout.] We report the observation of the $D^*_{s1}(2700)^+$ resonance in these two channels and obtain measurements of the mass $M(D^*_{s1}(2700)^+) = 2699^{+14}_{-7}$ MeV/$c^2$ and of the width $\\Gamma(D^*_{s1}(2700)^+) = 127^{+24}_{-19}$ MeV, including statistical and systematic uncertainties. In addition, we observe an enhancement in the $D^0K^+$ invariant mass around 2350--2500 MeV/$c^2$ in both decays $B^0 \\to D^-D^0K^+$ and $B^+ \\to \\overline{D}^0D^0K^+$, which we are not able to interpret. The results are based on 429 $fb^{-1}$ of data containing $471\\times 10^6$ $B\\overline{B}$ pairs collected at the $\\Upsilon(4S)$ resonance with the BaBar detector at the SLAC National Accelerator Laboratory.

  4. The quartile benefit plot: a middle ear surgery benefit assessment scheme.

    Science.gov (United States)

    Schmerber, Sébastien; Karkas, Alexandre; Righini, Christian A; Chahine, Karim A

    2008-05-01

    The purpose of this study is to present a new method for the assessment of hearing improvement following stapes surgery, taking into account additional, previously omitted evaluation criteria. Retrospective. A quartile plot, based on the currently used Glasgow benefit plot, is structured to include two additional criteria of hearing assessment, namely the absence of postoperative sensorineural hearing loss and the closure of the air-bone gap to <10 dB. Pre- and postoperative hearing results of 132 patients diagnosed with bilateral otosclerosis and treated with bilateral stapes surgery were plotted on both the classical Glasgow benefit plot and the new quartile benefit plot. The difference in success assessment due to stricter assessment criteria is demonstrated. Functional success rate following bilateral stapes surgery as plotted on the traditional Glasgow benefit plot was 51.5%. Success rate for bilateral stapes surgery assessed on the new quartile plot with the addition of the two new criteria was 38.64%. The difference in success rates was found to be statistically significant. The basis of benefit assessment in stapes surgery solely on the mean deficit in air conduction results in overestimation of success rate. This study demonstrates that results that appear satisfactory when judged by the Glasgow benefit plot are of modest success when assessed by the new quartile plot. The quartile benefit plot presented in this paper provides a strict measure of presentation and evaluation of stapes surgery results.

  5. The art of visualising dose distributions: Improved plotting flexibility for the R-package 'Luminescence'

    Science.gov (United States)

    Dietze, Michael; Kreutzer, Sebastian; Burow, Christoph; Fuchs, Margret; Fischer, Manfred; Schmidt, Christoph

    2014-05-01

    Luminescence dating profoundly relies on the compelling presentation of equivalent doses. However, there is no perfect way to depict equivalent dose distributions with all their measures of uncertainty. Amongst others, most common approaches are the Radial Plot and kernel density estimate (KDE) graphs. Both plot types are supported by the R-package 'Luminescence', a comprehensive and flexible compilation of functions for convenient analysis and presentation of luminescence dating data. In its upcoming version, the package comprises updated versions of these two most popular plot functions to allow the user sound control over a wide variety of graphical parameters. Furthermore, a new plot type is added: The Abanico Plot (plot_AbanicoPlot()). It combines the strengths of both, the classic Radial Plot and a KDE plot. Our contribution will show all updated data visualisation approaches and provide a quick guide (workflow chart) on how to get from measurement data to high-quality dose distribution plots. It may serve to raise further discussions about the package in general and specific plot approaches in particular.

  6. In situ radiological surveying at the Double Tracks site, Nellis Air Force Range, Tonopah, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Riedhauser, S.R.; Tipton, W.J.

    1996-04-01

    A team from the Remote Sensing Laboratory conducted a series of in situ radiological measurements at the Double Tracks site on the Nellis Air Force Range just east of Goldfield, Nevada, during the periods of April 10-13 and June 5-9, 1995. The survey team measured the terrestrial gamma radiation at the site to determine the levels of natural and man-made radiation. This site includes the areas covered by previous surveys conducted from 1962 through 1993. The main purpose of the first expedition was to assess several new techniques for characterizing sites with dispersed plutonium. The two purposes of the second expedition were to characterize the distribution of transuranic contamination (primarily plutonium) at the site by measuring the gamma rays from americium-241 and to assess the performance of the two new detector platforms. Both of the new platforms performed well, and the characterization of the americium-241 activity at the site was completed. Several plots compare these ground-based system measurements and the 1993 aerial data. The agreement is good considering the systems are characterized and calibrated through independent means. During the April expedition, several methods for measuring the depth distribution of americium-241 in the field were conducted as a way of quickly and reliably obtaining depth profiles without the need to wait for laboratory analysis. Two of the methods were not very effective, but the results of the third method appear very promising.

  7. Insect communities on experimental mugwort (Artemisia vulgaris L.) plots along an urban gradient.

    Science.gov (United States)

    Denys, C; Schmidt, Holger

    1998-01-01

    We studied the ability of insect herbivores and their natural enemies to colonize exposed, potted mugwort plants (Artemisia vulgaris L.) along a rural-urban gradient in 1994 in Hamburg (northern Germany). Ectophagous insects, leafmines and galls were monitored weekly from mid-May to mid-September. Endophagous insects were counted by harvesting and dissecting the stems at the end of the growing season. The rural-urban gradient was characterized by a gradient of vegetation-free areas and increasing proportion of ground covered in concrete, tarmac, paving and other impermeable surfaces surrounding the Artemisia plots, i.e. six different zones of increasing isolation. Numbers of insect species (herbivores, parasitoids and predators) decreased along the gradient from 43 to 12. Monophagous herbivores were not more affected than polyphagous herbivores, but parasitoids, especially rare species, were more strongly affected by isolation than predators. Some dominant herbivorous species were very successful colonizers and occurred in inner city sites devoid of all natural vegetation. Sometimes their abundance increased in the inner city to significantly higher densities than in the urban fringe. Isolation appeared to be the main reason for the observed patterns, since area and soil conditions were held constant in the experiment. Microclimate and pollution were considered to play a minor role.

  8. Above ground plots at the MAFES-Holly Springs Experiment Station for studying impacts of seepage on erosion

    Science.gov (United States)

    Sediment is the most common contaminant causing impairment of streams in the United States. In many areas, the dominant source of sediment is gully erosion. Consideration for subsurface flow contributions to these erosion processes has largely been neglected in assessments and prediction technologie...

  9. Characteristics of Gaseous Carbon Emission from a Tropical Peatland Fire: A Plot-Scale Field Experiment in Central Kalimantan, Indonesia

    Science.gov (United States)

    Hamada, Y.; Darung, U.; Limin, S. H.; Hatano, R.

    2014-12-01

    Tropical peatland in Southeast Asia is a vast reservoir of terrestrial carbon, which covers 24.8 million hectares and stores 68.5 PgC peat, equal to 11-14% of global peat carbon. In recent decades, large scale peatland fire has occurred frequently in that region, in which many areas of peatland were reclaimed with intention to use the land for forest plantation and rice paddy. We conducted a plot-scale peat burning experiment to elucidate the characteristics of gaseous carbon emission from a tropical peatland fire at the ground level. The experimental site was established at an open area 20 km southeast from Palangka Raya, Central Kalimantan Province, Indonesia. The size of the burning plot is 4 m in length and 3 m in width. Gas samples were collected at heights of 1.0, 0.5, 0.0 (aboveground), -0.1 and -0.2 m (belowground) through stainless steel and/or aluminum tubes settled across the edge of the plot. The concentrations of carbon dioxide (CO2), carbon monoxide (CO), methane (CH4) and particulate matter (PM) was determined. Soil temperature was recorded every 10 minutes 0.1 and 0.2 m below the ground surface. Twelve iron rods were installed in 1-m by 1-m square grid to determine the depth of burn scar. After ignition, flaming stage of peat burning was ceased within 1-2 hours. The following smoldering stage continued for a week. In the flaming stage, soil temperature at -0.1 m increased tentatively. After the smoldering stage began, the temperature rapidly increased to 350-450°C. Response of soil temperature at -0.2 m was less prominent. Concentrations of gaseous components became maximal in the flaming stage. During the smoldering stage, the concentrations gradually decreased. The influence of burning on CO2 and PM was prominently remained at -0.1 m, whereas those at -0.2 m were not so much. The averaged burnt depth was 5.8±5.1 cm. Based on bulk density of 0.22 g/cm3 and carbon content of 55.5%, the amount of carbon lost from the plot was 85.3 kg. Most of the

  10. Human Capital Tracking Tool -

    Data.gov (United States)

    Department of Transportation — AVS is now required to collect, track, and report on data from the following Flight, Business and Workforce Plan. The Human Resource Management’s Performance Target...

  11. Track Loading Vehicle - TLV

    Data.gov (United States)

    Federal Laboratory Consortium — The TLV is designed to apply forces close to the strength limits of the rails and other track structure components, such as ties, rail fasteners, and ballast, while...

  12. 1996 : Track Count Protocol

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The goal of St. Vincent National Wildlife Refuge's Track Count Protocol is to provide an index to the population size of game animals inhabiting St. Vincent Island.

  13. Case Analysis Tracking System

    Data.gov (United States)

    National Archives and Records Administration — CATS tracks Public and Federal Agency Reference Requests for OPF (Official Personnel Folder) , EMF (Employee Medical Folder), and eOPF (electronic Official Personnel...

  14. Financial Disclosure Tracking System

    Data.gov (United States)

    US Agency for International Development — USAID's FDTS identifies personal service contractors and local employees who should file disclosure reports. It tracks late filers and identifies those who must take...

  15. Matter Tracking Information System -

    Data.gov (United States)

    Department of Transportation — The Matter Tracking Information System (MTIS) principle function is to streamline and integrate the workload and work activity generated or addressed by our 300 plus...

  16. Neonate turtle tracking data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The objectives of this project are to use novel satellite tracking methods to provide improved estimation of threats at foraging areas and along migration routes for...

  17. LHCb on track

    CERN Multimedia

    2006-01-01

    On 7 and 8 June 2006, the last large component of the LHCb experiment was lowered into the cavern. This 10-tonne, 18-metre long metal structure known as 'the bridge' will support the LHCb tracking system.

  18. Patient Treatment Tracking Chart

    Science.gov (United States)

    ... Treatment Tracking Chart Viral Hepatitis Menu Menu Viral Hepatitis Viral Hepatitis Home For Veterans and the Public Veterans ... can record dates of blood work, laboratory values, hepatitis C viral load levels, medication dosages, and side effects. You ...

  19. Energy Tracking Software Platform

    Energy Technology Data Exchange (ETDEWEB)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles

    2011-04-04

    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. EnergyIT.com is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. CompareAndConserve.com (Gainesville-Green.com) helps homeowners conserve energy through education and competition. ToolsForTenants.com helps renters factor energy usage into their housing decisions.

  20. Tracking Performance at LHCb

    CERN Multimedia

    Wandernoth, S

    2010-01-01

    We present the tracking performance at LHCb by showing the mass resolution, impact parameter resolution and proper time resolution of the first data taken at LHCb. Furthermore several methods to estimate the tagging efficiency on data are presented.

  1. Procurement Tracking System (PTS)

    Data.gov (United States)

    Office of Personnel Management — The Procurement Tracking System (PTS) is used solely by the procurement staff of the Office of the Inspector General (OIG) at the U.S. Office of Personnel Management...

  2. LHCb VELO Tracking Resolutions

    CERN Multimedia

    Alexander, Michael

    2011-01-01

    The excellent tracking performance of the Vertex Locator (VELO) at LHCb is presented. The resolutions it achieves on single hits, impact parameters, and primary vertex positions are shown, with particular attention paid to measurement of impact parameters.

  3. Applied eye tracking research

    NARCIS (Netherlands)

    Jarodzka, Halszka

    2011-01-01

    Jarodzka, H. (2010, 12 November). Applied eye tracking research. Presentation and Labtour for Vereniging Gewone Leden in oprichting (VGL i.o.), Heerlen, The Netherlands: Open University of the Netherlands.

  4. Jet Car Track Site

    Data.gov (United States)

    Federal Laboratory Consortium — Located in Lakehurst, New Jersey, the Jet Car Track Site supports jet cars with J57 engines and has a maximum jet car thrust of 42,000 pounds with a maximum speed of...

  5. Applied eye tracking research

    NARCIS (Netherlands)

    Jarodzka, Halszka

    2011-01-01

    Jarodzka, H. (2010, 12 November). Applied eye tracking research. Presentation and Labtour for Vereniging Gewone Leden in oprichting (VGL i.o.), Heerlen, The Netherlands: Open University of the Netherlands.

  6. Function integrated track system

    OpenAIRE

    Hohnecker, Eberhard

    2010-01-01

    The paper discusses a function integrated track system that focuses on the reduction of acoustic emissions from railway lines. It is shown that the combination of an embedded rail system (ERS), a sound absorbing track surface, and an integrated mini sound barrier has significant acoustic advantages compared to a standard ballast superstructure. The acoustic advantages of an embedded rail system are particularly pronounced in the case of railway bridges. Finally, it is shown that a...

  7. Vehicle Tracking and Security

    Science.gov (United States)

    Scorer, A. G.

    1998-09-01

    This paper covers the wide area and short range locational technologies that are available for vehicle tracking in particular and mobile user security in general. It also summarises the radio communications services that can deliver information to the user. It considers the use that can be made of these technologies, when combined with procedures for delivering a response, in the security field, notably in relation to personal security, high-value load protection and the after-theft tracking markets.

  8. Provenance Tracking in UNICORE

    OpenAIRE

    Giesler, André; Hagemeier, Björn; Czekala, Myriam

    2015-01-01

    The automated tracking and storage of provenance information allows users of scientific workflow systems to validate and reproduce results of their experiments. Until now, UNICORE has not been providing comprehensive provenance features. For this reason, we plan to equip UNICORE with a flexible provenance tracking mechanism. Our goal is to ensure a suitable traceability of job and workflow processes into a description format supporting query capabilities and interoperability. In a first step,...

  9. Learning a Tracking and Estimation Integrated Graphical Model for Human Pose Tracking.

    Science.gov (United States)

    Zhao, Lin; Gao, Xinbo; Tao, Dacheng; Li, Xuelong

    2015-12-01

    We investigate the tracking of 2-D human poses in a video stream to determine the spatial configuration of body parts in each frame, but this is not a trivial task because people may wear different kinds of clothing and may move very quickly and unpredictably. The technology of pose estimation is typically applied, but it ignores the temporal context and cannot provide smooth, reliable tracking results. Therefore, we develop a tracking and estimation integrated model (TEIM) to fully exploit temporal information by integrating pose estimation with visual tracking. However, joint parsing of multiple articulated parts over time is difficult, because a full model with edges capturing all pairwise relationships within and between frames is loopy and intractable. In previous models, approximate inference was usually resorted to, but it cannot promise good results and the computational cost is large. We overcome these problems by exploring the idea of divide and conquer, which decomposes the full model into two much simpler tractable submodels. In addition, a novel two-step iteration strategy is proposed to efficiently conquer the joint parsing problem. Algorithmically, we design TEIM very carefully so that: 1) it enables pose estimation and visual tracking to compensate for each other to achieve desirable tracking results; 2) it is able to deal with the problem of tracking loss; and 3) it only needs past information and is capable of tracking online. Experiments are conducted on two public data sets in the wild with ground truth layout annotations, and the experimental results indicate the effectiveness of the proposed TEIM framework.

  10. POMO--Plotting Omics analysis results for Multiple Organisms.

    Science.gov (United States)

    Lin, Jake; Kreisberg, Richard; Kallio, Aleksi; Dudley, Aimée M; Nykter, Matti; Shmulevich, Ilya; May, Patrick; Autio, Reija

    2013-12-24

    Systems biology experiments studying different topics and organisms produce thousands of data values across different types of genomic data. Further, data mining analyses are yielding ranked and heterogeneous results and association networks distributed over the entire genome. The visualization of these results is often difficult and standalone web tools allowing for custom inputs and dynamic filtering are limited. We have developed POMO (http://pomo.cs.tut.fi), an interactive web-based application to visually explore omics data analysis results and associations in circular, network and grid views. The circular graph represents the chromosome lengths as perimeter segments, as a reference outer ring, such as cytoband for human. The inner arcs between nodes represent the uploaded network. Further, multiple annotation rings, for example depiction of gene copy number changes, can be uploaded as text files and represented as bar, histogram or heatmap rings. POMO has built-in references for human, mouse, nematode, fly, yeast, zebrafish, rice, tomato, Arabidopsis, and Escherichia coli. In addition, POMO provides custom options that allow integrated plotting of unsupported strains or closely related species associations, such as human and mouse orthologs or two yeast wild types, studied together within a single analysis. The web application also supports interactive label and weight filtering. Every iterative filtered result in POMO can be exported as image file and text file for sharing or direct future input. The POMO web application is a unique tool for omics data analysis, which can be used to visualize and filter the genome-wide networks in the context of chromosomal locations as well as multiple network layouts. With the several illustration and filtering options the tool supports the analysis and visualization of any heterogeneous omics data analysis association results for many organisms. POMO is freely available and does not require any installation or

  11. MATERIAL TRACKING USING LANMAS

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, F.

    2010-06-07

    LANMAS is a transaction-based nuclear material accountability software product developed to replace outdated and legacy accountability systems throughout the DOE. The core underlying purpose of LANMAS is to track nuclear materials inventory and report transactions (movement, mixing, splitting, decay, etc.) to the Nuclear Materials Management and Safeguards System (NMMSS). While LANMAS performs those functions well, there are many additional functions provided by the software product. As a material is received onto a site or created at a site, its entire lifecycle can be tracked in LANMAS complete to its termination of safeguards. There are separate functions to track material movements between and within material balance areas (MBAs). The level of detail for movements within a MBA is configurable by each site and can be as high as a site designation or as detailed as building/room/rack/row/position. Functionality exists to track the processing of materials, either as individual items or by modeling a bulk process as an individual item to track inputs and outputs from the process. In cases where sites have specialized needs, the system is designed to be flexible so that site specific functionality can be integrated into the product. This paper will demonstrate how the software can be used to input material into an account and track it to its termination of safeguards.

  12. Target Tracking in 3-D Using Estimation Based Nonlinear Control Laws for UAVs

    National Research Council Canada - National Science Library

    Mousumi Ahmed; Kamesh Subbarao

    2016-01-01

    ...) to track a moving target in 3-D space. A ground-based sensor or an onboard seeker antenna provides range, azimuth angle, and elevation angle measurements to a chaser UAV that implements an extended Kalman filter (EKF...

  13. Model-independent plot of dynamic PET data facilitates data interpretation and model selection.

    Science.gov (United States)

    Munk, Ole Lajord

    2012-02-21

    When testing new PET radiotracers or new applications of existing tracers, the blood-tissue exchange and the metabolism need to be examined. However, conventional plots of measured time-activity curves from dynamic PET do not reveal the inherent kinetic information. A novel model-independent volume-influx plot (vi-plot) was developed and validated. The new vi-plot shows the time course of the instantaneous distribution volume and the instantaneous influx rate. The vi-plot visualises physiological information that facilitates model selection and it reveals when a quasi-steady state is reached, which is a prerequisite for the use of the graphical analyses by Logan and Gjedde-Patlak. Both axes of the vi-plot have direct physiological interpretation, and the plot shows kinetic parameter in close agreement with estimates obtained by non-linear kinetic modelling. The vi-plot is equally useful for analyses of PET data based on a plasma input function or a reference region input function. The vi-plot is a model-independent and informative plot for data exploration that facilitates the selection of an appropriate method for data analysis.

  14. Statistical Analysis of Ensemble Forecasts of Tropical Cyclone Tracks over the North Atlantic

    Science.gov (United States)

    2012-06-01

    generally best suited for the extratropics such that no special perturbations are applied specific to individual tropical cyclones ( UCAR 2012...Available from http://edocs.nps.edu/]. 63 UCAR , cited 2012: Guide to GFS Ensemble Track Plots. [Available online at http://www.ral.ucar.edu/guidance

  15. Historical Trends in Ground-Based Optical Space Surveillance System Design

    Science.gov (United States)

    Shoemaker, M.; Shroyer, L.

    literature review and presenting further information on various systems, we gather specific metrics on the optical design. Technical specifications, such as aperture and field of view (FOV), are plotted with time to ascertain trends in ground system design. Aperture is a useful metric because it gives insight into the light-gathering capability, as well as the overall size and complexity of the system. The size of the FOV can indicate user priorities or system performance, such as tracking capability of the mount for SOI systems and star detection ability in OD systems that use celestial references for position measurements. The review is restricted to systems that use natural sunlight to illuminate targets, for the simple reason of having commonality between systems that span half a century, particularly recent COTS systems.

  16. A hierarchic approach for examining panarctic vegeta0on with a focus on the linkages between remote-sensing and plot-based studies: A prototype example from Toolik Lake, Alaska

    DEFF Research Database (Denmark)

    Walker, D.A.; Bhatt, U.S.; Breen, A.L.;

    A circumpolar view of Arctic vegetation developed with the advent of satellite-derived remote-sensing products. Interpretations of what the revealed patterns mean are dependent on a foundation of in-situ plot-based observations. Despite the importance of ground-based observations, only a few area...

  17. Design and Application of a Robust Vision Tracking System for Unmanned Rotorcraft

    Institute of Scientific and Technical Information of China (English)

    FAN Baojie; DU Yingkui

    2014-01-01

    In order to satisfy the requirements of UAV’s aerial safety monitoring and surveillance of sensitive areas, a robust vision system for the rotor UAV is designed and implemented, which includes visual airborne subsystem, ground station subsystem and wireless communication subsystem. Complete sky-ground and human-computer interaction loops are constructed. Based on the developed UAV vision platform, a real-time target tracking algorithm under the mean shift tracking framework is developed. The joint color-texture histogram is used to represent the target robustly. With the help of moment information, the scale and the orientation of the tracked target is estimated adaptively during the tracking process. A model updating scheme for the target and the background is introduced to reduce the interferences from background and the locating biases. Numerical simulation and real flight tracking experiments demonstrate that the overall visual tracking system is effective and has superior performance against several state-of-the-art algorithms.

  18. Thermal bioaerosol cloud tracking with Bayesian classification

    Science.gov (United States)

    Smith, Christian W.; Dupuis, Julia R.; Schundler, Elizabeth C.; Marinelli, William J.

    2017-05-01

    The development of a wide area, bioaerosol early warning capability employing existing uncooled thermal imaging systems used for persistent perimeter surveillance is discussed. The capability exploits thermal imagers with other available data streams including meteorological data and employs a recursive Bayesian classifier to detect, track, and classify observed thermal objects with attributes consistent with a bioaerosol plume. Target detection is achieved based on similarity to a phenomenological model which predicts the scene-dependent thermal signature of bioaerosol plumes. Change detection in thermal sensor data is combined with local meteorological data to locate targets with the appropriate thermal characteristics. Target motion is tracked utilizing a Kalman filter and nearly constant velocity motion model for cloud state estimation. Track management is performed using a logic-based upkeep system, and data association is accomplished using a combinatorial optimization technique. Bioaerosol threat classification is determined using a recursive Bayesian classifier to quantify the threat probability of each tracked object. The classifier can accept additional inputs from visible imagers, acoustic sensors, and point biological sensors to improve classification confidence. This capability was successfully demonstrated for bioaerosol simulant releases during field testing at Dugway Proving Grounds. Standoff detection at a range of 700m was achieved for as little as 500g of anthrax simulant. Developmental test results will be reviewed for a range of simulant releases, and future development and transition plans for the bioaerosol early warning platform will be discussed.

  19. A new instrument to measure plot-scale runoff

    Directory of Open Access Journals (Sweden)

    R. D. Stewart

    2014-11-01

    Full Text Available Accurate measurement of the amount and timing of surface runoff at multiple scales is needed to understand fundamental hydrological processes. At the plot-scale (i.e., length scales on the order of 1 to 10 m current methods for direct measurement of runoff either store the water in a collection vessel, which is unconducive to long-term monitoring studies, or utilize expensive installations such as large-scale tipping buckets or flume/weir systems. We developed an alternative low-cost, robust and reliable instrument to measure runoff that we call the "Upwelling Bernoulli Tube" (UBeTube. The UBeTube instrument is a pipe with a slot machined in its side that is installed vertically at the base of a runoff collection system. The flow rate through the slot is inferred by measuring the water height within the pipe. The geometry of the slot can be modified to suit the range of flow rates expected for a given site; we demonstrate a slot geometry which is capable of measuring flow rates across more than three orders of magnitude (up to 300 L min−1 while requiring only 30 cm of hydraulic head. System accuracy is dependent on both the geometry of the slot and the accuracy of the water level measurements. With an off-the-shelf pressure transducer sensor, the mean theoretical error for the demonstrated slot geometry was ~17% (ranging from errors of more than 50% at low flow rates to less than 2% at high flow rates, while the observed error during validation was 1–25%. A simple correction factor reduced this mean error to −14%, and further reductions in error could be achieved through the use of taller, narrower slot dimensions (which requires greater head gradients to drive flow or through more accurate water level measurements. The UBeTube device has been successfully employed in a long-term rainfall-runoff study, demonstrating the ability of the instrument to measure surface runoff across a range of flows and conditions.

  20. Mortality factors for dead trees from a subset of plots from the Sierra Nevada Forest Dynamics Plot Network from 1998 to 2010

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset was used to summarize and analyze the mortality factors recorderd on dead trees in the Sierra Nevada Forest Dynamics Plot Network, which is managed by...

  1. Cluster Tracking with Time-of-Flight Cameras

    DEFF Research Database (Denmark)

    Hansen, Dan Witzner; Hansen, Mads; Kirschmeyer, Martin

    2008-01-01

    coherence and reducing the influence of noise, the EM algorithm (expectation maximization) is used for tracking moving clusters of pixels significantly different from the background model. Each cluster is defined through a statistical model of points on the ground plane. We show the benefits of the time...

  2. Assessing exotic plant species invasions and associated soil characteristics: A case study in eastern Rocky Mountain National Park, Colorado, USA, using the pixel nested plot design

    Science.gov (United States)

    Kalkhan, M.A.; Stafford, E.J.; Woodly, P.J.; Stohlgren, T.J.

    2007-01-01

    Rocky Mountain National Park (RMNP), Colorado, USA, contains a diversity of plant species. However, many exotic plant species have become established, potentially impacting the structure and function of native plant communities. Our goal was to quantify patterns of exotic plant species in relation to native plant species, soil characteristics, and other abiotic factors that may indicate or predict their establishment and success. Our research approach for field data collection was based on a field plot design called the pixel nested plot. The pixel nested plot provides a link to multi-phase and multi-scale spatial modeling-mapping techniques that can be used to estimate total species richness and patterns of plant diversity at finer landscape scales. Within the eastern region of RMNP, in an area of approximately 35,000 ha, we established a total of 60 pixel nested plots in 9 vegetation types. We used canonical correspondence analysis (CCA) and multiple linear regressions to quantify relationships between soil characteristics and native and exotic plant species richness and cover. We also used linear correlation, spatial autocorrelation and cross correlation statistics to test for the spatial patterns of variables of interest. CCA showed that exotic species were significantly (P soil nitrogen (r = 0.58) and bare ground (r = -0.66). Pearson's correlation statistic showed significant linear relationships between exotic species, organic carbon, soil nitrogen, and bare ground. While spatial autocorrelations indicated that our 60 pixel nested plots were spatially independent, the cross correlation statistics indicated that exotic plant species were spatially associated with bare ground, in general, exotic plant species were most abundant in areas of high native species richness. This indicates that resource managers should focus on the protection of relatively rare native rich sites with little canopy cover, and fertile soils. Using the pixel nested plot approach for

  3. A New Process Monitoring Method Based on Waveform Signal by Using Recurrence Plot

    OpenAIRE

    Cheng Zhou; Weidong Zhang

    2015-01-01

    Process monitoring is an important research problem in numerous areas. This paper proposes a novel process monitoring scheme by integrating the recurrence plot (RP) method and the control chart technique. Recently, the RP method has emerged as an effective tool to analyze waveform signals. However, unlike the existing RP methods that employ recurrence quantification analysis (RQA) to quantify the recurrence plot by a few summary statistics; we propose new concepts of template recurrence plots ...

  4. Recurrence Plot Based Damage Detection Method by Integrating  Control Chart

    OpenAIRE

    Cheng Zhou; Weidong Zhang

    2015-01-01

    Because of the importance of damage detection in manufacturing systems and other areas, many fault detection methods have been developed that are based on a vibration signal. Little work, however, has been reported in the literature on using a recurrence plot method to analyze the vibration signal for damage detection. In this paper, we develop a recurrence plot based fault detection method by integrating the statistical process control technique. The recurrence plots of the vibration signals...

  5. Derivation of plotting position formula for GEV distribution using genetic algorithm

    Science.gov (United States)

    Kim, S.; Kim, T.; Heo, J.

    2008-12-01

    Probability plotting positions are used for the graphical display of annual maximum rainfall or flood series and the estimation of exceedance probability of those values. In addition, plotting positions allow a visual examination of the fitness of probability distribution provided by flood frequency analysis. Therefore, the graphical approach using plotting position has been applied to many fields of hydrology and water resources planning. Various plotting position formulas were developed for probability distributions in many researches and plotting position formulas by Gringorten(1963) and Cunnane(1978) were applied to the Gumbel and GEV distributions generally. Especially, Cunnane(1978) defined the plotting position that related with the mean of data and proposed the general formula that can be applied to various probability distributions. The definition of the plotting position by Cunnane(1978) have influenced on the plotting position of probability distribution contained shape parameter. In this study, the plotting position formula for the GEV distribution is derived by using the combination of the order statistics and the probability weight moment of the GEV distribution for various sample sizes and shape parameters. In addition, the parameters of plotting position formula for the GEV distribution are estimated by using genetic algorithm considering the range of a coefficient of skewness related with the shape parameters of the GEV distribution. The accuracy of derived plotting position formula for the GEV distribution is examined by the comparison of root mean square errors between theoretical reduced variates and those calculated from the derived and existing plotting position formulas such as Gringorten(1963) and Cunnane(1978).

  6. Innovative control systems for tracked vehicle platforms

    CERN Document Server

    2014-01-01

     This book has been motivated by an urgent need for designing and implementation of innovative control algorithms and systems for tracked vehicles. Nowadays the unmanned vehicles are becoming more and more common. Therefore there is a need for innovative mechanical constructions capable of adapting to various applications regardless the ground, air or water/underwater environment. There are multiple various activities connected with tracked vehicles. They can be distributed among three main groups: design and control algorithms, sensoric and vision based in-formation, construction and testing mechanical parts of unmanned vehicles. Scientists and researchers involved in mechanics, control algorithms, image processing, computer vision, data fusion, or IC will find this book useful.

  7. Tracked robot controllers for climbing obstacles autonomously

    Science.gov (United States)

    Vincent, Isabelle

    2009-05-01

    Research in mobile robot navigation has demonstrated some success in navigating flat indoor environments while avoiding obstacles. However, the challenge of analyzing complex environments to climb obstacles autonomously has had very little success due to the complexity of the task. Unmanned ground vehicles currently exhibit simple autonomous behaviours compared to the human ability to move in the world. This paper presents the control algorithms designed for a tracked mobile robot to autonomously climb obstacles by varying its tracks configuration. Two control algorithms are proposed to solve the autonomous locomotion problem for climbing obstacles. First, a reactive controller evaluates the appropriate geometric configuration based on terrain and vehicle geometric considerations. Then, a reinforcement learning algorithm finds alternative solutions when the reactive controller gets stuck while climbing an obstacle. The methodology combines reactivity to learning. The controllers have been demonstrated in box and stair climbing simulations. The experiments illustrate the effectiveness of the proposed approach for crossing obstacles.

  8. Airborne Infrared Search and Track Systems

    Directory of Open Access Journals (Sweden)

    Hari Babu Srivastava

    2007-09-01

    Full Text Available Infrared search and track (IRST systems are required for fighter aircraft to enable them to passively search, detect, track, classify, and prioritise multiple airborne targets under all aspects, look-up, look-down, and co-altitude conditions and engage them at as long ranges as possible. While the IRST systems have been proven in performance for ground-based and naval-based platforms, it is still facing some technical problems for airborne applications. These problems arise from uncertainty in target signature, atmospheric effects, background clutter (especially dense and varying clouds, signal and data processing algorithms to detect potential targets at long ranges and some hardware limitations such as large memory requirement to store and process wide field of view data. In this paper, an overview of airborne IRST as a system has been presented with detailed comparative simulation results of different detectionitracking algorithms and the present status of airborne IRSTs

  9. Luge Track Safety

    CERN Document Server

    Hubbard, Mont

    2012-01-01

    Simple geometric models of ice surface shape and equations of motion of objects on these surfaces can be used to explain ejection of sliders from ice tracks. Simulations using these can be used to explain why certain design features can be viewed as proximate causes of ejection from the track and hence design flaws. This paper studies the interaction of a particle model for the luge sled (or its right runner) with the ice fillet commonly connecting inside vertical walls and the flat track bottom. A numerical example analyzes the 2010 luge accident at the Vancouver Olympics. It shows that this runner-fillet interaction, and specifically the fillet's positive curvature up the inside wall, can cause a vertical velocity more than sufficient to clear the outside exit wall. In addition its negative curvature along the track, together with large vertical velocity, explains loss of fillet or wall contact and slider ejection. This exposes the fillet along inside walls as a track design flaw. A more transparent design ...

  10. Clean tracks for ATLAS

    CERN Multimedia

    2006-01-01

    First cosmic ray tracks in the integrated ATLAS barrel SCT and TRT tracking detectors. A snap-shot of a cosmic ray event seen in the different layers of both the SCT and TRT detectors. The ATLAS Inner Detector Integration Team celebrated a major success recently, when clean tracks of cosmic rays were detected in the completed semiconductor tracker (SCT) and transition radiation tracker (TRT) barrels. These tracking tests come just months after the successful insertion of the SCT into the TRT (See Bulletin 09/2006). The cosmic ray test is important for the experiment because, after 15 years of hard work, it is the last test performed on the fully assembled barrel before lowering it into the ATLAS cavern. The two trackers work together to provide millions of channels so that particles' tracks can be identified and measured with great accuracy. According to the team, the preliminary results were very encouraging. After first checks of noise levels in the final detectors, a critical goal was to study their re...

  11. Tree-fall gaps and carbon cycling in the Brazilian Amazon: results from two large forest plots

    Science.gov (United States)

    Espirito-Santo, F.; Keller, M.; Linder, E.; De Oliveira, R., Jr.; Pereira, C.; Oliveira, C. G.

    2013-12-01

    The dynamics of gaps play a role in the regimes of tree mortality and production of coarse woody debris (CWD) in forests. Few studies have attempted to map the distribution of gaps in tropical forest and the production of CWD, a large pool of ecosystem carbon. Here we linked gap formation with carbon cycling through analysis of the CWD inside of gaps. We surveyed two large forest inventory plots of 114 and 53 ha of the Tapajós National Forest (TNF) in the Brazilian Amazon during 2008 and 2009, respectively. We mapped all gaps and collected data on light availability, CWD stocks and tree mortality in the field. Gap location, canopy opening (CO) and leaf area index (LAI) estimated in the field were compared with two IKONOS-2 high-resolution satellite images acquired approximately at the time of the field measurements. We provide the first statistics of CWD production based on gap size in the tropical forest literature. In the two large plots (167 ha total area) we found 96 gaps. The gaps represented 1.42% of the total area and gaps TNF, the production of CWD in recent gaps was 0.76 Mg C ha-1 year-1 and the mean tree mortality was 2.38 stems ha-1 year 1. The area of gaps estimated by using thresholds of light intensity measured by remote sensing optical instruments was twice as large as the gap areas measured on the ground. We found no significant correlation between spectral remote sensing images and CO and LAI, likely because the high faction of shadow in high-resolution satellite images. We conclude that less than 30% of the annual tree mortality and CWD flux was associated with gaps and the detection of gaps with high resolution optical remote sensing remains a challenge because of the high proportion of shadow in the those images. These results highlight the need for permanent plots for long-term carbon studies.

  12. A tree species inventory in a one-hectare plot at the Batang Gadis National Park, North Sumatra, Indonesia

    Directory of Open Access Journals (Sweden)

    Kuswata Kartawinata

    2003-12-01

    Full Text Available KARTAWINATA, KUSWATA; SAMSOEDIN, ISMAYADI; HERIYANTO, M. AND AFRIASTINI, J. J. 2004. A tree species inventory in a one-hectare plot at the Batang Gadis National Park, North Sumatra, Indonesia. Reinwardtia 12 (2: 145 – 157. The results of the inventory of trees with DBH ≥ 10 cm shows that 184 species in 41 families, represented by 583 individuals with the total basal areas of 40.56 m² occurred in the one-hectare plot sampled. Together with the saplings and shrubs the number of species was 240 belonging to 47 families. The forest is richer in tree species than other lowland forests in North Sumatra, but poorer than those in Borneo and the Malay Peninsula. Dipterocarps constituted 18.42 % of total species with basal area of 18.99 m² or 46.82 % of the total basal area in the plot. The most prominent species was Shorea gibbosa. Hopea nigra, reported to be rare in Bangka and Belitung, occurred here as one of the ten leading species. The species-area curve shows that a considerable number of additional species was encountered more or less steadily up to one hectare and there was no indication of levelling off. A simulated profile diagram shows the forest may be stratified into five layers: (1 emergent layer, (2 upper canopy, (3 middle canopy, (4 lower canopy and (5 ground canopy. Dipterocarps were leading species in the emergent layer, upper canopy and middle canopy. Only 82 species were regenerating as represented by their presence in the sapling stage ranging from 5 to 50 plants/hectare. Macaranga lowii King ex Hook. f. dominated the section which seemed to be previously occupied by gaps.

  13. Immigration of the barley mildew pathogen into field plots of barley

    DEFF Research Database (Denmark)

    O'Hara, R.B.; Brown, J.K.M.

    1996-01-01

    Immigration of the barley powdery mildew pathogen (Erysiphe graminis f.sp. hordei) into field plots of the spring barley variety Tyra (carrying the resistance allele Mla1) was investigated. Spores were trapped from the top of the plot canopies, as well as from control plots of wheat with no barley...... nearby. Comparison of the frequencies of virulent and avirulent single-colony isolates showed that the amount of immigration, relative to the amount of inoculum being produced within the plot, reduced very rapidly, until it could not be detected in the middle of the growing season (mid-June)....

  14. Field Plot Points for Colonial National Historical Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This shapefile shows the location of vegetation sampling plots used for vegetation classification and mapping at Colonial National Historical Park.

  15. Field Plot Points for Richmond National Battlefield Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This shapefile shows the location of vegetation sampling plots used for vegetation classification and mapping at Richmond National Battlefield Park.

  16. Experimental strategies in carrying out VCU for tobacco crop I: plot design and size.

    Science.gov (United States)

    Toledo, F H R B; Ramalho, M A P; Pulcinelli, C E; Bruzi, A T

    2013-09-19

    We aimed to establish standards for tobacco Valor de Cultivo e Uso (VCU) in Brazil. We obtained information regarding the size and design of plots of two varietal groups of tobacco (Virginia and Burley). Ten inbred lines of each varietal group were evaluated in a randomized complete block design with four replications. The plot contained 42 plants with six rows of seven columns each. For each experiment plant, considering the position of the respective plant in the plot (row and column) as a reference, cured leaf weight (g/plant), total sugar content (%), and total alkaloid content (%) were determined. The maximum curvature of the variations in coefficients was estimated. Trials with the number of plants per plot ranging from 2 to 41 were simulated. The use of a border was not justified because the interactions between inbred lines x position in the plots were never significant, showing that the behavior of the inbred lines coincided with the different positions. The plant performance varied according to the column position in the plot. To lessen the effect of this factor, the use of plots with more than one row is recommended. Experimental precision, evaluated by the CV%, increased with an increase in plot size; nevertheless, the maximum curvature of the variation coefficient method showed no expressive increase in precision if the number of plants was greater than seven. The result in identification of the best inbred line, in terms of the size of each plot, coincided with the maximum curvature method.

  17. Visualizing the deep end of sound: plotting multi-parameter results from infrasound data analysis

    Science.gov (United States)

    Perttu, A. B.; Taisne, B.

    2016-12-01

    Infrasound is sound below the threshold of human hearing: approximately 20 Hz. The field of infrasound research, like other waveform based fields relies on several standard processing methods and data visualizations, including waveform plots and spectrograms. The installation of the International Monitoring System (IMS) global network of infrasound arrays, contributed to the resurgence of infrasound research. Array processing is an important method used in infrasound research, however, this method produces data sets with a large number of parameters, and requires innovative plotting techniques. The goal in designing new figures is to be able to present easily comprehendible, and information-rich plots by careful selection of data density and plotting methods.

  18. Textual Form and Cultural Affect: William Empson's Double-Plot and Raymond Williams's Structure of Feeling

    Institute of Scientific and Technical Information of China (English)

    Pamela McCallum

    2005-01-01

    By insisting on the primacy of double-plot, Empson brackets the sometimes deceptive appearances of a text's content to uncover and disengage the more fundamental double-plot system at work within the defining structure of the text. Empson's thinking about the reception of double-plot structures enables Raymond Williams's early formulations of structure of feeling, in particular the gesturing this perplexing, underdeveloped, but persistent concept makes towards understanding collective response to cultural forms. This article explores the implications of the reception of double-plot structures, drawing out the assumptions inscribed in Empson's claims about processes at work as an audience engages with these dramatic structures.

  19. Runoff and erosion from native and reclaimed sites: Large versus small plots

    Energy Technology Data Exchange (ETDEWEB)

    Wood, M.K.; Buchanan, B.A. [New Mexico State Univ., Las Cruces, NM (United States); Estrada, O.J. [BHP - Utah International Inc., Fruitland, NM (United States)

    1990-12-31

    Runoff and erosion were compared using rainfall simulators on small (1 m{sup 2}) and large (3 x 10.67 m) runoff plots. Four small and two large plots were located on each of eight sites. These included two native sites dominated by bunchgrasses and shrubs on sandy dunes, two nearly barren badlands, two 10 year-old reclaimed sites treated with topdressing and dominated by bunchgrasses and shrubs, and two first year reclaimed sites treated with topdressing and dominated by annual forbs and wheat. Rainfall was more uniform and more easily controlled on small plots than large plots. Many small plots (at least eight) could be rained on each day by using wind screens while large plots required calm winds during simulated rainfall which was delayed for many days on numerous occasions. Results from small plots were as accurate and more precise than from large plots on native and reclaimed sites where slope lengths were truncated by shrubs and bunchgrasses. Runoff and erosion from small plots could be measured quickly and cheaply for evaluating reclamation success.

  20. Coordinated Target Tracking via a Hybrid Optimization Approach

    Science.gov (United States)

    Wang, Yin; Cao, Yan

    2017-01-01

    Recent advances in computer science and electronics have greatly expanded the capabilities of unmanned aerial vehicles (UAV) in both defense and civil applications, such as moving ground object tracking. Due to the uncertainties of the application environments and objects’ motion, it is difficult to maintain the tracked object always within the sensor coverage area by using a single UAV. Hence, it is necessary to deploy a group of UAVs to improve the robustness of the tracking. This paper investigates the problem of tracking ground moving objects with a group of UAVs using gimbaled sensors under flight dynamic and collision-free constraints. The optimal cooperative tracking path planning problem is solved using an evolutionary optimization technique based on the framework of chemical reaction optimization (CRO). The efficiency of the proposed method was demonstrated through a series of comparative simulations. The results show that the cooperative tracking paths determined by the newly developed method allows for longer sensor coverage time under flight dynamic restrictions and safety conditions. PMID:28264425