WorldWideScience

Sample records for ground system architecture

  1. Renaissance architecture for Ground Data Systems

    Science.gov (United States)

    Perkins, Dorothy C.; Zeigenfuss, Lawrence B.

    1994-01-01

    The Mission Operations and Data Systems Directorate (MO&DSD) has embarked on a new approach for developing and operating Ground Data Systems (GDS) for flight mission support. This approach is driven by the goals of minimizing cost and maximizing customer satisfaction. Achievement of these goals is realized through the use of a standard set of capabilities which can be modified to meet specific user needs. This approach, which is called the Renaissance architecture, stresses the engineering of integrated systems, based upon workstation/local area network (LAN)/fileserver technology and reusable hardware and software components called 'building blocks.' These building blocks are integrated with mission specific capabilities to build the GDS for each individual mission. The building block approach is key to the reduction of development costs and schedules. Also, the Renaissance approach allows the integration of GDS functions that were previously provided via separate multi-mission facilities. With the Renaissance architecture, the GDS can be developed by the MO&DSD or all, or part, of the GDS can be operated by the user at their facility. Flexibility in operation configuration allows both selection of a cost-effective operations approach and the capability for customizing operations to user needs. Thus the focus of the MO&DSD is shifted from operating systems that we have built to building systems and, optionally, operations as separate services. Renaissance is actually a continuous process. Both the building blocks and the system architecture will evolve as user needs and technology change. Providing GDS on a per user basis enables this continuous refinement of the development process and product and allows the MO&DSD to remain a customer-focused organization. This paper will present the activities and results of the MO&DSD initial efforts toward the establishment of the Renaissance approach for the development of GDS, with a particular focus on both the technical

  2. Advanced Ground Systems Maintenance Enterprise Architecture Project

    Science.gov (United States)

    Perotti, Jose M. (Compiler)

    2015-01-01

    The project implements an architecture for delivery of integrated health management capabilities for the 21st Century launch complex. The delivered capabilities include anomaly detection, fault isolation, prognostics and physics based diagnostics.

  3. Architecture Governance: The Importance of Architecture Governance for Achieving Operationally Responsive Ground Systems

    Science.gov (United States)

    Kolar, Mike; Estefan, Jeff; Giovannoni, Brian; Barkley, Erik

    2011-01-01

    Topics covered (1) Why Governance and Why Now? (2) Characteristics of Architecture Governance (3) Strategic Elements (3a) Architectural Principles (3b) Architecture Board (3c) Architecture Compliance (4) Architecture Governance Infusion Process. Governance is concerned with decision making (i.e., setting directions, establishing standards and principles, and prioritizing investments). Architecture governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level

  4. Architecture Governance: The Importance of Architecture Governance for Achieving Operationally Responsive Ground Systems

    Science.gov (United States)

    Kolar, Mike; Estefan, Jeff; Giovannoni, Brian; Barkley, Erik

    2011-01-01

    Topics covered (1) Why Governance and Why Now? (2) Characteristics of Architecture Governance (3) Strategic Elements (3a) Architectural Principles (3b) Architecture Board (3c) Architecture Compliance (4) Architecture Governance Infusion Process. Governance is concerned with decision making (i.e., setting directions, establishing standards and principles, and prioritizing investments). Architecture governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level

  5. A Systems Approach to Developing an Affordable Space Ground Transportation Architecture using a Commonality Approach

    Science.gov (United States)

    Garcia, Jerry L.; McCleskey, Carey M.; Bollo, Timothy R.; Rhodes, Russel E.; Robinson, John W.

    2012-01-01

    This paper presents a structured approach for achieving a compatible Ground System (GS) and Flight System (FS) architecture that is affordable, productive and sustainable. This paper is an extension of the paper titled "Approach to an Affordable and Productive Space Transportation System" by McCleskey et al. This paper integrates systems engineering concepts and operationally efficient propulsion system concepts into a structured framework for achieving GS and FS compatibility in the mid-term and long-term time frames. It also presents a functional and quantitative relationship for assessing system compatibility called the Architecture Complexity Index (ACI). This paper: (1) focuses on systems engineering fundamentals as it applies to improving GS and FS compatibility; (2) establishes mid-term and long-term spaceport goals; (3) presents an overview of transitioning a spaceport to an airport model; (4) establishes a framework for defining a ground system architecture; (5) presents the ACI concept; (6) demonstrates the approach by presenting a comparison of different GS architectures; and (7) presents a discussion on the benefits of using this approach with a focus on commonality.

  6. Ground System Architectures Workshop GMSEC SERVICES SUITE (GSS): an Agile Development Story

    Science.gov (United States)

    Ly, Vuong

    2017-01-01

    The GMSEC (Goddard Mission Services Evolution Center) Services Suite (GSS) is a collection of tools and software services along with a robust customizable web-based portal that enables the user to capture, monitor, report, and analyze system-wide GMSEC data. Given our plug-and-play architecture and the needs for rapid system development, we opted to follow the Scrum Agile Methodology for software development. Being one of the first few projects to implement the Agile methodology at NASA GSFC, in this presentation we will present our approaches, tools, successes, and challenges in implementing this methodology. The GMSEC architecture provides a scalable, extensible ground and flight system for existing and future missions. GMSEC comes with a robust Application Programming Interface (GMSEC API) and a core set of Java-based GMSEC components that facilitate the development of a GMSEC-based ground system. Over the past few years, we have seen an upbeat in the number of customers who are moving from a native desktop application environment to a web based environment particularly for data monitoring and analysis. We also see a need to provide separation of the business logic from the GUI display for our Java-based components and also to consolidate all the GUI displays into one interface. This combination of separation and consolidation brings immediate value to a GMSEC-based ground system through increased ease of data access via a uniform interface, built-in security measures, centralized configuration management, and ease of feature extensibility.

  7. Joint Polar Satellite System (JPSS) Common Ground System (CGS) Technical Performance Measures of the Block 2 Architecture

    Science.gov (United States)

    Grant, K. D.; Panas, M.

    2016-12-01

    NOAA and NASA are jointly acquiring the next-generation civilian weather satellite system: the Joint Polar Satellite System (JPSS). JPSS replaced the afternoon orbit component and ground processing of NOAA's old POES system. JPSS satellites carry sensors that collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere, and space. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a globally distributed, multi-mission system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture has been upgraded to Block 2.0 to satisfy several key objectives, including: "operationalizing" the first satellite, Suomi NPP, which originally was a risk reduction mission; leveraging lessons learned in multi-mission support, taking advantage of newer, more reliable and efficient technologies and satisfying constraints due of the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 48 Technical Performance Measures (TPMs) across 9 categories: Data Availability, Data Latency, Operational Availability, Margin, Scalability, Situational Awareness, Transition (between environments and sites), WAN Efficiency, and Data Recovery Processing. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 9 TPM categories listed above. We will describe how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

  8. Systemic Architecture

    DEFF Research Database (Denmark)

    Poletto, Marco; Pasquero, Claudia

    2012-01-01

    design protocols developed to describe the city as a territory of self-organization. Collecting together nearly a decade of design experiments by the authors and their practice, ecoLogicStudio, the book discusses key disciplinary definitions such as ecologic urbanism, algorithmic architecture, bottom......This is a manual investigating the subject of urban ecology and systemic development from the perspective of architectural design. It sets out to explore two main goals: to discuss the contemporary relevance of a systemic practice to architectural design, and to share a toolbox of informational......-up or tactical design, behavioural space and the boundary of the natural and the artificial realms within the city and architecture. A new kind of "real-time world-city" is illustrated in the form of an operational design manual for the assemblage of proto-architectures, the incubation of proto...

  9. On Using SysML, DoDAF 2.0 and UPDM to Model the Architecture for the NOAA's Joint Polar Satellite System (JPSS) Ground System (GS)

    Science.gov (United States)

    Hayden, Jeffrey L.; Jeffries, Alan

    2012-01-01

    The JPSS Ground System is a lIexible system of systems responsible for telemetry, tracking & command (TT &C), data acquisition, routing and data processing services for a varied lIeet of satellites to support weather prediction, modeling and climate modeling. To assist in this engineering effort, architecture modeling tools are being employed to translate the former NPOESS baseline to the new JPSS baseline, The paper will focus on the methodology for the system engineering process and the use of these architecture modeling tools within that process, The Department of Defense Architecture Framework version 2,0 (DoDAF 2.0) viewpoints and views that are being used to describe the JPSS GS architecture are discussed. The Unified Profile for DoOAF and MODAF (UPDM) and Systems Modeling Language (SysML), as ' provided by extensions to the MagicDraw UML modeling tool, are used to develop the diagrams and tables that make up the architecture model. The model development process and structure are discussed, examples are shown, and details of handling the complexities of a large System of Systems (SoS), such as the JPSS GS, with an equally complex modeling tool, are described

  10. GEARS: An Enterprise Architecture Based On Common Ground Services

    Science.gov (United States)

    Petersen, S.

    2014-12-01

    Earth observation satellites collect a broad variety of data used in applications that range from weather forecasting to climate monitoring. Within NOAA the National Environmental Satellite Data and Information Service (NESDIS) supports these applications by operating satellites in both geosynchronous and polar orbits. Traditionally NESDIS has acquired and operated its satellites as stand-alone systems with their own command and control, mission management, processing, and distribution systems. As the volume, velocity, veracity, and variety of sensor data and products produced by these systems continues to increase, NESDIS is migrating to a new concept of operation in which it will operate and sustain the ground infrastructure as an integrated Enterprise. Based on a series of common ground services, the Ground Enterprise Architecture System (GEARS) approach promises greater agility, flexibility, and efficiency at reduced cost. This talk describes the new architecture and associated development activities, and presents the results of initial efforts to improve product processing and distribution.

  11. Smashing the Stovepipe: Leveraging the GMSEC Open Architecture and Advanced IT Automation to Rapidly Prototype, Develop and Deploy Next-Generation Multi-Mission Ground Systems

    Science.gov (United States)

    Swenson, Paul

    2017-01-01

    Satellite/Payload Ground Systems - Typically highly-customized to a specific mission's use cases - Utilize hundreds (or thousands!) of specialized point-to-point interfaces for data flows / file transfers Documentation and tracking of these complex interfaces requires extensive time to develop and extremely high staffing costs Implementation and testing of these interfaces are even more cost-prohibitive, and documentation often lags behind implementation resulting in inconsistencies down the road With expanding threat vectors, IT Security, Information Assurance and Operational Security have become key Ground System architecture drivers New Federal security-related directives are generated on a daily basis, imposing new requirements on current / existing ground systems - These mandated activities and data calls typically carry little or no additional funding for implementation As a result, Ground System Sustaining Engineering groups and Information Technology staff continually struggle to keep up with the rolling tide of security Advancing security concerns and shrinking budgets are pushing these large stove-piped ground systems to begin sharing resources - I.e. Operational / SysAdmin staff, IT security baselines, architecture decisions or even networks / hosting infrastructure Refactoring these existing ground systems into multi-mission assets proves extremely challenging due to what is typically very tight coupling between legacy components As a result, many "Multi-Mission" ops. environments end up simply sharing compute resources and networks due to the difficulty of refactoring into true multi-mission systems Utilizing continuous integration / rapid system deployment technologies in conjunction with an open architecture messaging approach allows System Engineers and Architects to worry less about the low-level details of interfaces between components and configuration of systems GMSEC messaging is inherently designed to support multi-mission requirements, and

  12. Design and Development of an Equipotential Voltage Reference (Grounding) System for a Low-Cost Rapid-Development Modular Spacecraft Architecture

    Science.gov (United States)

    Lukash, James A.; Daley, Earl

    2011-01-01

    This work describes the design and development effort to adapt rapid-development space hardware by creating a ground system using solutions of low complexity, mass, & cost. The Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft is based on the modular common spacecraft bus architecture developed at NASA Ames Research Center. The challenge was building upon the existing modular common bus design and development work and improving the LADEE spacecraft design by adding an Equipotential Voltage Reference (EVeR) system, commonly referred to as a ground system. This would aid LADEE in meeting Electromagnetic Environmental Effects (E3) requirements, thereby making the spacecraft more compatible with itself and its space environment. The methods used to adapt existing hardware are presented, including provisions which may be used on future spacecraft.

  13. Application of parallelized software architecture to an autonomous ground vehicle

    Science.gov (United States)

    Shakya, Rahul; Wright, Adam; Shin, Young Ho; Momin, Orko; Petkovsek, Steven; Wortman, Paul; Gautam, Prasanna; Norton, Adam

    2011-01-01

    This paper presents improvements made to Q, an autonomous ground vehicle designed to participate in the Intelligent Ground Vehicle Competition (IGVC). For the 2010 IGVC, Q was upgraded with a new parallelized software architecture and a new vision processor. Improvements were made to the power system reducing the number of batteries required for operation from six to one. In previous years, a single state machine was used to execute the bulk of processing activities including sensor interfacing, data processing, path planning, navigation algorithms and motor control. This inefficient approach led to poor software performance and made it difficult to maintain or modify. For IGVC 2010, the team implemented a modular parallel architecture using the National Instruments (NI) LabVIEW programming language. The new architecture divides all the necessary tasks - motor control, navigation, sensor data collection, etc. into well-organized components that execute in parallel, providing considerable flexibility and facilitating efficient use of processing power. Computer vision is used to detect white lines on the ground and determine their location relative to the robot. With the new vision processor and some optimization of the image processing algorithm used last year, two frames can be acquired and processed in 70ms. With all these improvements, Q placed 2nd in the autonomous challenge.

  14. Open architecture CNC system

    Energy Technology Data Exchange (ETDEWEB)

    Tal, J. [Galil Motion Control Inc., Sunnyvale, CA (United States); Lopez, A.; Edwards, J.M. [Los Alamos National Lab., NM (United States)

    1995-04-01

    In this paper, an alternative solution to the traditional CNC machine tool controller has been introduced. Software and hardware modules have been described and their incorporation in a CNC control system has been outlined. This type of CNC machine tool controller demonstrates that technology is accessible and can be readily implemented into an open architecture machine tool controller. Benefit to the user is greater controller flexibility, while being economically achievable. PC based, motion as well as non-motion features will provide flexibility through a Windows environment. Up-grading this type of controller system through software revisions will keep the machine tool in a competitive state with minimal effort. Software and hardware modules are mass produced permitting competitive procurement and incorporation. Open architecture CNC systems provide diagnostics thus enhancing maintainability, and machine tool up-time. A major concern of traditional CNC systems has been operator training time. Training time can be greatly minimized by making use of Windows environment features.

  15. Instrumented Architectural Simulation System

    Science.gov (United States)

    Delagi, B. A.; Saraiya, N.; Nishimura, S.; Byrd, G.

    1987-01-01

    Simulation of systems at an architectural level can offer an effective way to study critical design choices if (1) the performance of the simulator is adequate to examine designs executing significant code bodies, not just toy problems or small application fragements, (2) the details of the simulation include the critical details of the design, (3) the view of the design presented by the simulator instrumentation leads to useful insights on the problems with the design, and (4) there is enough flexibility in the simulation system so that the asking of unplanned questions is not suppressed by the weight of the mechanics involved in making changes either in the design or its measurement. A simulation system with these goals is described together with the approach to its implementation. Its application to the study of a particular class of multiprocessor hardware system architectures is illustrated.

  16. Numerical Propulsion System Simulation Architecture

    Science.gov (United States)

    Naiman, Cynthia G.

    2004-01-01

    The Numerical Propulsion System Simulation (NPSS) is a framework for performing analysis of complex systems. Because the NPSS was developed using the object-oriented paradigm, the resulting architecture is an extensible and flexible framework that is currently being used by a diverse set of participants in government, academia, and the aerospace industry. NPSS is being used by over 15 different institutions to support rockets, hypersonics, power and propulsion, fuel cells, ground based power, and aerospace. Full system-level simulations as well as subsystems may be modeled using NPSS. The NPSS architecture enables the coupling of analyses at various levels of detail, which is called numerical zooming. The middleware used to enable zooming and distributed simulations is the Common Object Request Broker Architecture (CORBA). The NPSS Developer's Kit offers tools for the developer to generate CORBA-based components and wrap codes. The Developer's Kit enables distributed multi-fidelity and multi-discipline simulations, preserves proprietary and legacy codes, and facilitates addition of customized codes. The platforms supported are PC, Linux, HP, Sun, and SGI.

  17. Proposed Functional Architecture and Associated Benefits Analysis of a Common Ground Control Station for Unmanned Aircraft Systems

    Science.gov (United States)

    2010-03-01

    79 4. Fleet UAS Platform Wholeness Concept of Operations .................................. 80 C. NAVAIR AVIATION TRAINING SYSTEMS...facilitate commonality or interoperability. A review of literature has revealed that UAS commonality is desired, but no guidelines for implementation...interfaces. The Data Link Interface (DLI), the Command and Control Interface (CCI) and the Human Computer Interface ( HCI ) are each detailed in

  18. Space/ground systems as cooperating agents

    Science.gov (United States)

    Grant, T. J.

    1994-01-01

    Within NASA and the European Space Agency (ESA) it is agreed that autonomy is an important goal for the design of future spacecraft and that this requires on-board artificial intelligence. NASA emphasizes deep space and planetary rover missions, while ESA considers on-board autonomy as an enabling technology for missions that must cope with imperfect communications. ESA's attention is on the space/ground system. A major issue is the optimal distribution of intelligent functions within the space/ground system. This paper describes the multi-agent architecture for space/ground systems (MAASGS) which would enable this issue to be investigated. A MAASGS agent may model a complete spacecraft, a spacecraft subsystem or payload, a ground segment, a spacecraft control system, a human operator, or an environment. The MAASGS architecture has evolved through a series of prototypes. The paper recommends that the MAASGS architecture should be implemented in the operational Dutch Utilization Center.

  19. Naval open systems architecture

    Science.gov (United States)

    Guertin, Nick; Womble, Brian; Haskell, Virginia

    2013-05-01

    For the past 8 years, the Navy has been working on transforming the acquisition practices of the Navy and Marine Corps toward Open Systems Architectures to open up our business, gain competitive advantage, improve warfighter performance, speed innovation to the fleet and deliver superior capability to the warfighter within a shrinking budget1. Why should Industry care? They should care because we in Government want the best Industry has to offer. Industry is in the business of pushing technology to greater and greater capabilities through innovation. Examples of innovations are on full display at this conference, such as exploring the impact of difficult environmental conditions on technical performance. Industry is creating the tools which will continue to give the Navy and Marine Corps important tactical advantages over our adversaries.

  20. Architecture for Survivable System Processing (ASSP)

    Science.gov (United States)

    Wood, Richard J.

    1991-11-01

    The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

  1. Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

    NARCIS (Netherlands)

    Harrison, Neil B.; Avgeriou, Paris

    2008-01-01

    Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or wh

  2. Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

    NARCIS (Netherlands)

    Harrison, Neil B.; Avgeriou, Paris

    2008-01-01

    Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or

  3. Architectural Design for European SST System

    Science.gov (United States)

    Utzmann, Jens; Wagner, Axel; Blanchet, Guillaume; Assemat, Francois; Vial, Sophie; Dehecq, Bernard; Fernandez Sanchez, Jaime; Garcia Espinosa, Jose Ramon; Agueda Mate, Alberto; Bartsch, Guido; Schildknecht, Thomas; Lindman, Niklas; Fletcher, Emmet; Martin, Luis; Moulin, Serge

    2013-08-01

    The paper presents the results of a detailed design, evaluation and trade-off of a potential European Space Surveillance and Tracking (SST) system architecture. The results have been produced in study phase 1 of the on-going "CO-II SSA Architectural Design" project performed by the Astrium consortium as part of ESA's Space Situational Awareness Programme and are the baseline for further detailing and consolidation in study phase 2. The sensor network is comprised of both ground- and space-based assets and aims at being fully compliant with the ESA SST System Requirements. The proposed ground sensors include a surveillance radar, an optical surveillance system and a tracking network (radar and optical). A space-based telescope system provides significant performance and robustness for the surveillance and tracking of beyond-LEO target objects.

  4. Ground Enterprise Management System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Emergent Space Technologies Inc. proposes to develop the Ground Enterprise Management System (GEMS) for spacecraft ground systems. GEMS will provide situational...

  5. On Information System Security Architecture

    Institute of Scientific and Technical Information of China (English)

    ChunfangJiang; ChaoyuanYue; JianguoZuo

    2004-01-01

    The current studies on security architecture and information system security architecture (ISSA) are surveyed in this paper, and some types and their features of ISSA are discussed. Then, the structural elements of ISSA are analyzed, and the constructing steps for ISSA are proposed.

  6. The Architecture of the Laser Communications Relay Demonstration Ground Stations: An Overview

    Science.gov (United States)

    Moores, John D.; Wilson, Keith E.

    2013-01-01

    NASA's Laser Communication Relay Demonstration (LCRD) will be NASA's first long-duration demonstration of laser communications (lasercom) in space, providing geosynchronous-satellite-hosted bidirectional relay services between two Earth ground stations. LCRD will leverage and enhance existing ground stations. Ground Station 1 (GS-1) will leverage the Optical Communications Telescope Laboratory (OCTL) built by JPL, while Ground Station 2 (GS-2) will leverage the Lunar Laser Communications Demonstration (LLCD) Ground Terminal (LLGT) built by MIT Lincoln Laboratory. While each ground system has unique telescopes and integrated optics, many of the backend subsystems (e.g., communications, environmental monitoring, control, user simulators) will be common to both terminals. Here we provide an overview of the architecture of the LCRD ground stations, and the planned enhancements to the existing facilities.

  7. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...... design. This research contributes to the vocabulary and understanding of the architecture phenomenon. A conceptual framework is provided which allows for conceptualization of the architecture phenomenon, and how it applies within production system design. To aid the companies in the operational design...... and handling of production system architecture, research is conducted into the description of production system architecture, including what an architecture description contains in general and what it should describe for production systems specifically. The contribution in this area of research consists...

  8. System architecture with XML

    CERN Document Server

    Daum, Berthold

    2002-01-01

    XML is bringing together some fairly disparate groups into a new cultural clash: document developers trying to understand what a transaction is, database analysts getting upset because the relational model doesn''t fit anymore, and web designers having to deal with schemata and rule based transformations. The key to rising above the confusion is to understand the different semantic structures that lie beneath the standards of XML, and how to model the semantics to achieve the goals of the organization. A pure architecture of XML doesn''t exist yet, and it may never exist as the underlying technologies are so diverse. Still, the key to understanding how to build the new web infrastructure for electronic business lies in understanding the landscape of these new standards.If your background is in document processing, this book will show how you can use conceptual modeling to model business scenarios consisting of business objects, relationships, processes, and transactions in a document-centric way. Database des...

  9. Architectures Toward Reusable Science Data Systems

    Science.gov (United States)

    Moses, J. F.

    2014-12-01

    Science Data Systems (SDS) comprise an important class of data processing systems that support product generation from remote sensors and in-situ observations. These systems enable research into new science data products, replication of experiments and verification of results. NASA has been building ground systems for satellite data processing since the first Earth observing satellites launched and is continuing development of systems to support NASA science research, NOAA's weather satellites and USGS's Earth observing satellite operations. The basic data processing workflows and scenarios continue to be valid for remote sensor observations research as well as for the complex multi-instrument operational satellite data systems being built today. System functions such as ingest, product generation and distribution need to be configured and performed in a consistent and repeatable way with an emphasis on scalability. This paper will examine the key architectural elements of several NASA satellite data processing systems currently in operation and under development that make them suitable for scaling and reuse. Examples of architectural elements that have become attractive include virtual machine environments, standard data product formats, metadata content and file naming, workflow and job management frameworks, data acquisition, search, and distribution protocols. By highlighting key elements and implementation experience the goal is to recognize architectures that will outlast their original application and be readily adaptable for new applications. Concepts and principles are explored that lead to sound guidance for SDS developers and strategists.

  10. Systems Architecture for a Nationwide Healthcare System.

    Science.gov (United States)

    Abin, Jorge; Nemeth, Horacio; Friedmann, Ignacio

    2015-01-01

    From a national level to give Internet technology support, the Nationwide Integrated Healthcare System in Uruguay requires a model of Information Systems Architecture. This system has multiple healthcare providers (public and private), and a strong component of supplementary services. Thus, the data processing system should have an architecture that considers this fact, while integrating the central services provided by the Ministry of Public Health. The national electronic health record, as well as other related data processing systems, should be based on this architecture. The architecture model described here conceptualizes a federated framework of electronic health record systems, according to the IHE affinity model, HL7 standards, local standards on interoperability and security, as well as technical advice provided by AGESIC. It is the outcome of the research done by AGESIC and Systems Integration Laboratory (LINS) on the development and use of the e-Government Platform since 2008, as well as the research done by the team Salud.uy since 2013.

  11. Learning Systems: Architecture and Intervention.

    Science.gov (United States)

    Buxton, Bill

    1984-01-01

    Discusses tasks, resources, and feedback, the three basic elements in the architecture of learning systems; analyzes these elements in relation to on-the-job learning; and discusses interventions to improve these processes and provide a positive contribution to the productivity of the organization by helping people learn. (MBR)

  12. Architectures for block Toeplitz systems

    NARCIS (Netherlands)

    Bouras, Ilias; Glentis, George-Othon; Kalouptsidis, Nicholas

    1996-01-01

    In this paper efficient VLSI architectures of highly concurrent algorithms for the solution of block linear systems with Toeplitz or near-to-Toeplitz entries are presented. The main features of the proposed scheme are the use of scalar only operations, multiplications/divisions and additions, and th

  13. Deep Space Network information system architecture study

    Science.gov (United States)

    Beswick, C. A.; Markley, R. W. (Editor); Atkinson, D. J.; Cooper, L. P.; Tausworthe, R. C.; Masline, R. C.; Jenkins, J. S.; Crowe, R. A.; Thomas, J. L.; Stoloff, M. J.

    1992-01-01

    The purpose of this article is to describe an architecture for the DSN information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990's. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies--i.e., computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control.

  14. System structures in architecture

    DEFF Research Database (Denmark)

    Vibæk, Kasper Sánchez

    2012-01-01

    Afhandlingen introducerer begrebet systemstruktur i den arkitektoniske designproces som en måde at indskyde et systemniveau i arkitektur og byggeri, der ligger mellem generel byggeteknik og specifikke arkitektoniske resultater. For at operationalisere en sådan systemstruktur udarbejdes en systems...

  15. Electrical system architecture

    Science.gov (United States)

    Algrain, Marcelo C.; Johnson, Kris W.; Akasam, Sivaprasad; Hoff, Brian D.

    2008-07-15

    An electrical system for a vehicle includes a first power source generating a first voltage level, the first power source being in electrical communication with a first bus. A second power source generates a second voltage level greater than the first voltage level, the second power source being in electrical communication with a second bus. A starter generator may be configured to provide power to at least one of the first bus and the second bus, and at least one additional power source may be configured to provide power to at least one of the first bus and the second bus. The electrical system also includes at least one power consumer in electrical communication with the first bus and at least one power consumer in electrical communication with the second bus.

  16. Physiological effects of the synthetic strigolactone analog GR24 on root system architecture in Arabidopsis: Another below-ground role for strigolactones?

    NARCIS (Netherlands)

    Ruyter-Spira, C.P.; Kohlen, W.; Charnikhova, T.; Zeijl, van A.; Bezouwen, van L.; Ruijter, de N.C.A.; Cardoso, C.; Lopez Raez, J.A.; Matusova, R.; Bours, R.M.E.H.; Verstappen, F.W.A.; Bouwmeester, H.J.

    2011-01-01

    In this study, the role of the recently identified class of phytohormones, strigolactones, in shaping root architecture was addressed. Primary root lengths of strigolactone-deficient and -insensitive Arabidopsis (Arabidopsis thaliana) plants were shorter than those of wild-type plants. This was

  17. Features of the Deployed NPOESS Ground System

    Science.gov (United States)

    Smith, D.; Grant, K. D.; Route, G.; Heckmann, G.

    2009-12-01

    NOAA, DoD, and NASA are jointly acquiring the National Polar-orbiting Operational Environmental Satellite System (NPOESS) replacing the current NOAA Polar-orbiting Operational Environmental Satellites (POES) and the DoD's Defense Meteorological Satellite Program (DMSP). The NPOESS satellites will carry a suite of sensors to collect meteorological, oceanographic, climatological, and solar-geophysical observations of the earth, atmosphere and space. The ground data processing segment is the Interface Data Processing Segment (IDPS), developed by Raytheon Intelligence & Information Systems (IIS). The IDPS processes NPOESS satellite data to provide environmental data products (aka, Environmental Data Records or EDRs) to US NOAA and DoD processing centers. The IDPS will process EDRs beginning with the NPOESS Preparatory Project (NPP) and through the lifetime of the NPOESS system. The command and telemetry segment is the Command, Control and Communications Segment (C3S), also developed by Raytheon IIS. C3S is responsible for managing the overall NPOESS mission from control and status of the space and ground assets to ensuring delivery of timely, high quality data from the Space Segment (SS) to IDPS for processing. In addition, the C3S provides the globally distributed ground assets necessary to collect and transport mission, telemetry, and command data between the satellites and the processing locations. The C3S provides all functions required for day-to-day commanding and state-of-health monitoring of the NPP and NPOESS satellites, and delivery of SMD to each Central IDP for data products development and transfer to System subscribers. The C3S also monitors and reports system-wide health, status and data communications with external systems and between the NPOESS segments. The NPOESS C3S and IDPS ground segments have been delivered and transitioned to operations for NPP. C3S was transitioned to operations at the NOAA Satellite Operations Facility in Suitland MD in August

  18. Ontology-driven health information systems architectures.

    Science.gov (United States)

    Blobel, Bernd; Oemig, Frank

    2009-01-01

    Following an architecture vision such as the Generic Component Model (GCM) architecture framework, health information systems for supporting personalized care have to be based on a component-oriented architecture. Representing concepts and their interrelations, the GCM perspectives system architecture, domains, and development process can be described by the domains' ontologies. The paper introduces ontology principles, ontology references to the GCM as well as some practical aspects of ontology-driven approaches to semantically interoperable and sustainable health information systems.

  19. Pluto Express power system architecture

    Energy Technology Data Exchange (ETDEWEB)

    Carr, G.A. [California Inst. of Tech., Pasadena, CA (United States). Jet Propulsion Lab.

    1996-12-31

    The Pluto Express power system must answer the challenge of the next generation spacecraft by reducing its power, mass and volume envelopes. Technology developed by the New Millennium Program will enable the power system to meet the stringent requirements for the Pluto Express mission without exceeding the spacecraft mass and volume budgets. Traditionally, there has been an increasing trend of the percentage of mass of the power system electronics with respect to the total spacecraft mass. With all of the previous technology focus on high density digital packaging, the power system electronics have not been keeping pace forcing the spacecraft to absorb a relative increase in the power system mass. The increasing trend can be reversed by using mixed signal ASICs and high density multi-chip-module (MCM) packaging techniques validated by the New Millennium Program. As the size of the spacecraft shrinks, the power system electronics must become tightly integrated with the spacecraft loads. The power system architecture needs the flexibility to accommodate the specific load requirements without sacrificing the capability for growth or reduction as the spacecraft requirements change throughout the development. Modularity is a key requirement that will reduce the overall power system cost. Although the focus has been on shrinking the power system volume and mass, the efficiency and functionality cannot be ignored. Increased efficiency and functionality will only enhance the power systems capability to reduce spacecraft power requirements. The combination of the New Millennium packaging technologies with the Pluto Express power system architecture will produce a product with the capability to meet a wide range of mission profiles while reducing system development costs.

  20. Ground Control System Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Eric Loros

    2001-07-31

    The Ground Control System contributes to the safe construction and operation of the subsurface facility, including accesses and waste emplacement drifts, by maintaining the configuration and stability of the openings during construction, development, emplacement, and caretaker modes for the duration of preclosure repository life. The Ground Control System consists of ground support structures installed within the subsurface excavated openings, any reinforcement made to the rock surrounding the opening, and inverts if designed as an integral part of the system. The Ground Control System maintains stability for the range of geologic conditions expected at the repository and for all expected loading conditions, including in situ rock, construction, operation, thermal, and seismic loads. The system maintains the size and geometry of operating envelopes for all openings, including alcoves, accesses, and emplacement drifts. The system provides for the installation and operation of sensors and equipment for any required inspection and monitoring. In addition, the Ground Control System provides protection against rockfall for all subsurface personnel, equipment, and the engineered barrier system, including the waste package during the preclosure period. The Ground Control System uses materials that are sufficiently maintainable and that retain the necessary engineering properties for the anticipated conditions of the preclosure service life. These materials are also compatible with postclosure waste isolation performance requirements of the repository. The Ground Control System interfaces with the Subsurface Facility System for operating envelopes, drift orientation, and excavated opening dimensions, Emplacement Drift System for material compatibility, Monitored Geologic Repository Operations Monitoring and Control System for ground control instrument readings, Waste Emplacement/Retrieval System to support waste emplacement operations, and the Subsurface Excavation System

  1. A Systems Engineering Approach to Architecture Development

    Science.gov (United States)

    Di Pietro, David A.

    2015-01-01

    Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles

  2. Exploring Enterprise, System of Systems, and System and Software Architectures

    Science.gov (United States)

    2016-06-13

    2009 Carnegie Mellon University Exploring Enterprise, System of Systems, and System and Software Architectures Software Engineering Institute...TITLE AND SUBTITLE Exploring Enterprise, System of Systems, and System and Software Architectures 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...Carnegie Mellon University, Software Engineering Institute,Pittsburgh,PA,15213 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY

  3. Space Telecommunications Radio System (STRS) Architecture. Part 1; Tutorial - Overview

    Science.gov (United States)

    Handler, Louis M.; Briones, Janette C.; Mortensen, Dale J.; Reinhart, Richard C.

    2012-01-01

    Space Telecommunications Radio System (STRS) Architecture Standard provides a NASA standard for software-defined radio. STRS is being demonstrated in the Space Communications and Navigation (SCaN) Testbed formerly known as Communications, Navigation and Networking Configurable Testbed (CoNNeCT). Ground station radios communicating the SCaN testbed are also being written to comply with the STRS architecture. The STRS Architecture Tutorial Overview presents a general introduction to the STRS architecture standard developed at the NASA Glenn Research Center (GRC), addresses frequently asked questions, and clarifies methods of implementing the standard. The STRS architecture should be used as a base for many of NASA s future telecommunications technologies. The presentation will provide a basic understanding of STRS.

  4. Information Systems for Enterprise Architecture

    Directory of Open Access Journals (Sweden)

    Oswaldo Moscoso Zea

    2014-03-01

    Full Text Available (Received: 2014/02/14 - Accepted: 2014/03/25Enterprise Architecture (EA has emerged as one of the most important topics to consider in Information System studies and has grown to become an essential business management activity to visualize and evaluate the future direction of a company. Nowadays in the market there are several software tools that support Enterprise Architects to work with EA. In order to decrease the risk of purchasing software tools that do not fulfill stakeholder´s needs is important to assess the software before making an investment. In this paper a literature review of the state of the art of EA will be done. Furthermore evaluation initiatives and existing information systems are analyzed which can support decision makers in the appropriate software tools for their companies.

  5. Distributed intelligence for ground/space systems

    Science.gov (United States)

    Aarup, Mads; Munch, Klaus Heje; Fuchs, Joachim; Hartmann, Ralf; Baud, Tim

    1994-01-01

    DI is short for Distributed Intelligence for Ground/Space Systems and the DI Study is one in a series of ESA projects concerned with the development of new concepts and architectures for future autonomous spacecraft systems. The kick-off of DI was in January 1994 and the planned duration is three years. The background of DI is the desire to design future ground/space systems with a higher degree of autonomy than seen in today's missions. The aim of introducing autonomy in spacecraft systems is to: (1) lift the role of the spacecraft operators from routine work and basic troubleshooting to supervision; (2) ease access to and increase availability of spacecraft resources; (3) carry out basic mission planning for users; (4) enable missions which have not yet been feasible due to eg. propagation delays, insufficient ground station coverage etc.; and (5) possibly reduce mission cost. The study serves to identify the feasibility of using state-of-the-art technologies in the area of planning, scheduling, fault detection using model-based diagnosis and knowledge processing to obtain a higher level of autonomy in ground/space systems.

  6. Facies and depositional architecture according to a jet efflux model of a late Paleozoic tidewater grounding-line system from the Itararé Group (Paraná Basin), southern Brazil

    Science.gov (United States)

    Aquino, Carolina Danielski; Buso, Victoria Valdez; Faccini, Ubiratan Ferrucio; Milana, Juan Pablo; Paim, Paulo Sergio Gomes

    2016-04-01

    -laden nature of the flows. At the transitional zone, a hydraulic jump produces a rapid shift of conglomeratic to sandy facies with associated scour features. Towards the distal zones, the jet detaches to originate a vertical turbulent jet characterized by more diluted flows. Discussion of fan facies and architecture within a framework of jet-efflux dynamics provides an improved understanding of grounding-line fans systems that produce coarse-grained strata commonly enclosed by fine-grained rocks. The results have clear implication in terms of prediction of facies tract and geometry of oil and gas reservoirs deposited under similar conditions. And also can be useful to identifying the position of a glacial terminus through time.

  7. Ground Enterprise Management System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Spacecraft ground systems are on the cusp of achieving "plug-and-play" capability, i.e., they are approaching the state in which the various components can be...

  8. Grounded Object and Grasp Representations in a Cognitive Architecture

    DEFF Research Database (Denmark)

    Kraft, Dirk

    . We also explain how the feature-action relationship can be improved through learning from a set of experiences. Once physical control is achieved, we can move the object in such a way that we can gather visual information from different viewpoints. We describe how this information can be integrated......Robotic systems are today still mostly unable to perform complex tasks in unknown environments. While there have been many approaches to cope with unknown environments, for example in mobile robot navigation, the work done when it comes to more complex tasks, for example object handling are, less...... developed. This work presents a system that is able to learn autonomously about objects and applicable grasps in an unknown environment through exploratory manipulation and to then use this grounded knowledge in a planning setup to address complex tasks. A set of different subsystems is needed to achieve...

  9. A Robust Separation Assurance (SA) Architecture Using Integrated Airborne and Ground SA Concepts Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Intelligent Automation, Inc. proposes a robust SA architecture that uses integrated airborne and ground-based SA concepts such that SA functions are switched between...

  10. Battery-Less Electroencephalogram System Architecture Optimization

    Science.gov (United States)

    2016-12-01

    ARL-TR-7909•DEC 2016 US Army Research Laboratory Battery-Less ElectroencephalogramSystem Architecture Optimization by Peter Gadfort and Renooka...DEC 2016 US Army Research Laboratory Battery-Less ElectroencephalogramSystem Architecture Optimization by Peter GadfortSensors and Electron Devices... Architecture Optimization Peter Gadfort and Renooka Karmarkar ARL-TR-7909 Approved for public release; distribution is unlimited. 13 June 2016 – 26 September

  11. Constructing Grounded Theory: Reflections on a Case Study of a Professor of Architectural Design.

    Science.gov (United States)

    Janesick, Valerie J.

    1982-01-01

    Discusses a case study describing the philosophy of teaching design to architecture students as practiced by one professor. A model of his architectural design curriculum emerged. Three issues arose: constructing theory from data grounded in experience, posing appropriate research questions, and understanding the roots of ethnographic inquiry.…

  12. Grounded Object and Grasp Representations in a Cognitive Architecture

    DEFF Research Database (Denmark)

    Kraft, Dirk

    for example unknown objects, we need to establish that something is an object (and not, an obstacle). One of the initial steps there is to see if we can manipulate the object. We therefore present work that describes how to achieve physical control over an object. This work uses a feature-action relationship...... developed. This work presents a system that is able to learn autonomously about objects and applicable grasps in an unknown environment through exploratory manipulation and to then use this grounded knowledge in a planning setup to address complex tasks. A set of different subsystems is needed to achieve....... We also explain how the feature-action relationship can be improved through learning from a set of experiences. Once physical control is achieved, we can move the object in such a way that we can gather visual information from different viewpoints. We describe how this information can be integrated...

  13. Designing flexible engineering systems utilizing embedded architecture options

    Science.gov (United States)

    Pierce, Jeff G.

    This dissertation develops and applies an integrated framework for embedding flexibility in an engineered system architecture. Systems are constantly faced with unpredictability in the operational environment, threats from competing systems, obsolescence of technology, and general uncertainty in future system demands. Current systems engineering and risk management practices have focused almost exclusively on mitigating or preventing the negative consequences of uncertainty. This research recognizes that high uncertainty also presents an opportunity to design systems that can flexibly respond to changing requirements and capture additional value throughout the design life. There does not exist however a formalized approach to designing appropriately flexible systems. This research develops a three stage integrated flexibility framework based on the concept of architecture options embedded in the system design. Stage One defines an eight step systems engineering process to identify candidate architecture options. This process encapsulates the operational uncertainty though scenario development, traces new functional requirements to the affected design variables, and clusters the variables most sensitive to change. The resulting clusters can generate insight into the most promising regions in the architecture to embed flexibility in the form of architecture options. Stage Two develops a quantitative option valuation technique, grounded in real options theory, which is able to value embedded architecture options that exhibit variable expiration behavior. Stage Three proposes a portfolio optimization algorithm, for both discrete and continuous options, to select the optimal subset of architecture options, subject to budget and risk constraints. Finally, the feasibility, extensibility and limitations of the framework are assessed by its application to a reconnaissance satellite system development problem. Detailed technical data, performance models, and cost estimates

  14. Unmanned Ground Systems Roadmap

    Science.gov (United States)

    2011-07-01

    Squad Mission Support System SOC .............................. Special Operations Command SOFC ............................ Solid Oxide Fuel Cell ...technologies may be used to match a given Use Profile: Table 5. Power Use Profiles Energy Storage Energy Harvesting Fuel Cells Engines Lead Acid...significant amount of research and development in both Government and Industry have been devoted to the areas of energy storage, fuel cells , and small

  15. Systems and the Changing Architectural Practice.

    Science.gov (United States)

    Heimsath, Clovis B.

    The architecture profession needs to employ systems building design in order to raise the rate of productivity and performance in construction. Changes have been made in architecture educational programs that recognize the shift in the role of the architect from design genius to building production manager. Systems design has led to changes within…

  16. Software Architecture Patterns for System Administration Support

    NARCIS (Netherlands)

    Bijvank, Ronald; Wiersema, Wiebe; Köppe, Christian

    2013-01-01

    Many quality aspects of software systems are addressed in the existing literature on software architecture patterns. But the aspect of system administration seems to be a bit overlooked, even though it is an important aspect too. In this work we present three software architecture patterns that, whe

  17. Seismic architecture and sedimentology of a major grounding zone system deposited by the Bjørnøyrenna Ice Stream during Late Weichselian deglaciation

    Science.gov (United States)

    Rüther, Denise Christina; Mattingsdal, Rune; Andreassen, Karin; Forwick, Matthias; Husum, Katrine

    2011-09-01

    A 280 km wide sediment wedge in outer Bjørnøyrenna (Bear Island Trough), south-western Barents Sea, has been investigated using 2D and 3D seismic data, sediment gravity cores, as well as regional swath and large scale bathymetry data. The bathymetry data indicate a division into an up to 35 m high frontal wedge with large depressions, and an upstream part characterized by mega scale glacial lineations (MSGL). From seismic sections increasing erosion is demonstrated for the upstream part, coinciding with the location of MSGL. Whether the latter are depositional features postdating an extensive erosional event or formed by erosion remains inconclusive. Based on the distinct morphology and internal structures, we infer that the system was deposited during a rapid readvance whereby the ice front pushed and bulldozed predominantly soft, diluted proglacial sediments. Analyses in the eastern part of the sediment system reveal the existence of imbricated thrust sheets in the frontal part of the wedge. This is suggested to imply upstream erosion of sedimentary rock and incorporation of thrusted blocks into the moraine, forming a composite ridge locally. We argue that observed large scale depressions are dead-ice features in the marine environment. It is envisioned that intense englacial thrusting may have developed into a decollement as the cold glacier snout got overrun by ice masses from the interior, thereby enabling the inclusion of slabs of ice in the push moraine mass. Radiocarbon dates indicate that the sediment wedge was deposited around 17,090 cal yrs BP (14,530 14C yrs BP) and that the ice front probably remained stable until 16,580 cal yrs BP (13,835 14C yrs BP).

  18. Sustainable, Reliable Mission-Systems Architecture

    Science.gov (United States)

    O'Neil, Graham; Orr, James K.; Watson, Steve

    2007-01-01

    A mission-systems architecture, based on a highly modular infrastructure utilizing: open-standards hardware and software interfaces as the enabling technology is essential for affordable and sustainable space exploration programs. This mission-systems architecture requires (a) robust communication between heterogeneous system, (b) high reliability, (c) minimal mission-to-mission reconfiguration, (d) affordable development, system integration, and verification of systems, and (e) minimal sustaining engineering. This paper proposes such an architecture. Lessons learned from the Space Shuttle program and Earthbound complex engineered system are applied to define the model. Technology projections reaching out 5 years are mde to refine model details.

  19. ELISA, a demonstrator environment for information systems architecture design

    Science.gov (United States)

    Panem, Chantal

    1994-01-01

    This paper describes an approach of reusability of software engineering technology in the area of ground space system design. System engineers have lots of needs similar to software developers: sharing of a common data base, capitalization of knowledge, definition of a common design process, communication between different technical domains. Moreover system designers need to simulate dynamically their system as early as possible. Software development environments, methods and tools now become operational and widely used. Their architecture is based on a unique object base, a set of common management services and they host a family of tools for each life cycle activity. In late '92, CNES decided to develop a demonstrative software environment supporting some system activities. The design of ground space data processing systems was chosen as the application domain. ELISA (Integrated Software Environment for Architectures Specification) was specified as a 'demonstrator', i.e. a sufficient basis for demonstrations, evaluation and future operational enhancements. A process with three phases was implemented: system requirements definition, design of system architectures models, and selection of physical architectures. Each phase is composed of several activities that can be performed in parallel, with the provision of Commercial Off the Shelves Tools. ELISA has been delivered to CNES in January 94, currently used for demonstrations and evaluations on real projects (e.g. SPOT4 Satellite Control Center). It is on the way of new evolutions.

  20. Architecture design of a virtualized embedded system

    Directory of Open Access Journals (Sweden)

    A.Sbaa

    2013-01-01

    Full Text Available Nowadays, embedded systems have become a major driver of technological developments particularly in the industrial sector. In an embedded system, the hardware and software components are so intertwined that evolution is often a big issue. Thanks to the contributions of virtualization it is possible to design more flexible and scalable embedded systems. In fact, virtualization adds an abstraction layer between the hardware and the software to make it less intimately dependent. In this paper we propose system architecture based on embedded virtualization that will be modeled by the multi-agent systems. In the first part, we will discuss the state of the art with respect to embedded systems, multi-agent systems and the concept of virtualization. In the second part, we explain theissues related to traditional embedded systems and the constraints associated with their architecture. Subsequently, we propose a virtualization based architecture for embedded systems. In the last part we will showcase this architecture through a prototype.

  1. 46 CFR 120.376 - Grounded distribution systems (Neutral grounded).

    Science.gov (United States)

    2010-10-01

    ... ELECTRICAL INSTALLATION Power Sources and Distribution Systems § 120.376 Grounded distribution systems... distribution system having a neutral bus or conductor must have the neutral grounded. (c) The neutral or each... generator is connected to the bus, except the neutral of an emergency power generation system must...

  2. LSST active optics system software architecture

    Science.gov (United States)

    Thomas, Sandrine J.; Chandrasekharan, Srinivasan; Lotz, Paul; Xin, Bo; Claver, Charles; Angeli, George; Sebag, Jacques; Dubois-Felsmann, Gregory P.

    2016-08-01

    The Large Synoptic Survey Telescope (LSST) is an 8-meter class wide-field telescope now under construction on Cerro Pachon, near La Serena, Chile. This ground-based telescope is designed to conduct a decade-long time domain survey of the optical sky. In order to achieve the LSST scientific goals, the telescope requires delivering seeing limited image quality over the 3.5 degree field-of-view. Like many telescopes, LSST will use an Active Optics System (AOS) to correct in near real-time the system aberrations primarily introduced by gravity and temperature gradients. The LSST AOS uses a combination of 4 curvature wavefront sensors (CWS) located on the outside of the LSST field-of-view. The information coming from the 4 CWS is combined to calculate the appropriate corrections to be sent to the 3 different mirrors composing LSST. The AOS software incorporates a wavefront sensor estimation pipeline (WEP) and an active optics control system (AOCS). The WEP estimates the wavefront residual error from the CWS images. The AOCS determines the correction to be sent to the different degrees of freedom every 30 seconds. In this paper, we describe the design and implementation of the AOS. More particularly, we will focus on the software architecture as well as the AOS interactions with the various subsystems within LSST.

  3. Space vehicle field unit and ground station system

    Energy Technology Data Exchange (ETDEWEB)

    Judd, Stephen; Dallmann, Nicholas; Delapp, Jerry; Proicou, Michael; Seitz, Daniel; Michel, John; Enemark, Donald

    2017-09-19

    A field unit and ground station may use commercial off-the-shelf (COTS) components and share a common architecture, where differences in functionality are governed by software. The field units and ground stations may be easy to deploy, relatively inexpensive, and be relatively easy to operate. A novel file system may be used where datagrams of a file may be stored across multiple drives and/or devices. The datagrams may be received out of order and reassembled at the receiving device.

  4. Space vehicle field unit and ground station system

    Science.gov (United States)

    Judd, Stephen; Dallmann, Nicholas; Delapp, Jerry; Proicou, Michael; Seitz, Daniel; Michel, John; Enemark, Donald

    2016-10-25

    A field unit and ground station may use commercial off-the-shelf (COTS) components and share a common architecture, where differences in functionality are governed by software. The field units and ground stations may be easy to deploy, relatively inexpensive, and be relatively easy to operate. A novel file system may be used where datagrams of a file may be stored across multiple drives and/or devices. The datagrams may be received out of order and reassembled at the receiving device.

  5. Marshall Application Realignment System (MARS) Architecture

    Science.gov (United States)

    Belshe, Andrea; Sutton, Mandy

    2010-01-01

    The Marshall Application Realignment System (MARS) Architecture project was established to meet the certification requirements of the Department of Defense Architecture Framework (DoDAF) V2.0 Federal Enterprise Architecture Certification (FEAC) Institute program and to provide added value to the Marshall Space Flight Center (MSFC) Application Portfolio Management process. The MARS Architecture aims to: (1) address the NASA MSFC Chief Information Officer (CIO) strategic initiative to improve Application Portfolio Management (APM) by optimizing investments and improving portfolio performance, and (2) develop a decision-aiding capability by which applications registered within the MSFC application portfolio can be analyzed and considered for retirement or decommission. The MARS Architecture describes a to-be target capability that supports application portfolio analysis against scoring measures (based on value) and overall portfolio performance objectives (based on enterprise needs and policies). This scoring and decision-aiding capability supports the process by which MSFC application investments are realigned or retired from the application portfolio. The MARS Architecture is a multi-phase effort to: (1) conduct strategic architecture planning and knowledge development based on the DoDAF V2.0 six-step methodology, (2) describe one architecture through multiple viewpoints, (3) conduct portfolio analyses based on a defined operational concept, and (4) enable a new capability to support the MSFC enterprise IT management mission, vision, and goals. This report documents Phase 1 (Strategy and Design), which includes discovery, planning, and development of initial architecture viewpoints. Phase 2 will move forward the process of building the architecture, widening the scope to include application realignment (in addition to application retirement), and validating the underlying architecture logic before moving into Phase 3. The MARS Architecture key stakeholders are most

  6. Communication architectures for systems-on-chip

    CERN Document Server

    Ayala, Jose L

    2011-01-01

    A presentation of state-of-the-art approaches from an industrial applications perspective, Communication Architectures for Systems-on-Chip shows professionals, researchers, and students how to attack the problem of data communication in the manufacture of SoC architectures. With its lucid illustration of current trends and research improving the performance, quality, and reliability of transactions, this is an essential reference for anyone dealing with communication mechanisms for embedded systems, systems-on-chip, and multiprocessor architectures--or trying to overcome existing limitations.

  7. Integrated Optical Interconnect Architectures for Embedded Systems

    CERN Document Server

    Nicolescu, Gabriela

    2013-01-01

    This book provides a broad overview of current research in optical interconnect technologies and architectures. Introductory chapters on high-performance computing and the associated issues in conventional interconnect architectures, and on the fundamental building blocks for integrated optical interconnect, provide the foundations for the bulk of the book which brings together leading experts in the field of optical interconnect architectures for data communication. Particular emphasis is given to the ways in which the photonic components are assembled into architectures to address the needs of data-intensive on-chip communication, and to the performance evaluation of such architectures for specific applications.   Provides state-of-the-art research on the use of optical interconnects in Embedded Systems; Begins with coverage of the basics for high-performance computing and optical interconnect; Includes a variety of on-chip optical communication topologies; Features coverage of system integration and opti...

  8. INNOVATIONS FOR STRUCTURAL SYSTEM EDUCATION IN ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    Saniye Karaman Öztaş

    2015-09-01

    Full Text Available Structural systems, which play an important role in today’s architectural education, have become an issue that is analyzed by mega structures using different disciplines in the process from the design stage to the construction stage. While design and structural system studies are performed together in practice, architecture students usually have difficulty in reflecting their learning from the structural system course into their design studio in architectural education. In this study, information about education method for "Structural System and Technologies I" course, carried out in the fourth semester (second class in Department of Architecture in Gebze Technical University, was primarily given. Unlike previous teaching methods in this course scope, a structural system modeling to solve the given design problem was requested from the students during spring semester 2015. It was aimed to provide the students with an understanding of general design principles involving structural elements and learning about the necessity in which the structural system should be considered in conjunction with the architectural design, concluding with a two-week assignment. A survey was conducted among 55 architecture students in order to evaluate the outcomes of the assignment. According to the survey results, 61% of the students stated that function, form, and structural system affect on another. 20% of them stated that function, form, and structural system, respectively, have an order of importance in the design process. 9% of them stated that structural system determine form and function. 6 % of them stated that form, function, and structural system, respectively, have an order of importance in the design process. Finally, 4 % of them stated that their relations change depending on the condition. Innovative teaching method in this study is found to be successful because the students have experienced the importance of materials in structural system and

  9. Standard data systems architecture for the Space Station

    Science.gov (United States)

    Greenberg, E.; Hooke, A. J.; Pomphrey, R. B.; Smith, J. F.

    1986-01-01

    Attention is given to an end-to-end Space Station Data System (SSDS) architecture which is based on internationally-recommended standards developed by the Consultative Committee for Space Data Systems (CCSDS). The proposed system uses simple modular building blocks that are recursively replicated and linked to construct essentially any desired data system configuration. The SSDS concept provides for a user-transparent data transport system which is entirely independent of the characteristics of the user data being transported, and in addition, has the flexibility to accommodate mission-induced changes in data traffic. SSDS physical elements include the following: (1) on-orbit local area networks, (2) space-to-ground, ground-to-space, and space-to-space data links, and (3) ground mission support facilities containing telemetry and telecommand data handling termini and preprocessing services.

  10. Standard data systems architecture for the Space Station

    Science.gov (United States)

    Greenberg, E.; Hooke, A. J.; Pomphrey, R. B.; Smith, J. F.

    1986-01-01

    Attention is given to an end-to-end Space Station Data System (SSDS) architecture which is based on internationally-recommended standards developed by the Consultative Committee for Space Data Systems (CCSDS). The proposed system uses simple modular building blocks that are recursively replicated and linked to construct essentially any desired data system configuration. The SSDS concept provides for a user-transparent data transport system which is entirely independent of the characteristics of the user data being transported, and in addition, has the flexibility to accommodate mission-induced changes in data traffic. SSDS physical elements include the following: (1) on-orbit local area networks, (2) space-to-ground, ground-to-space, and space-to-space data links, and (3) ground mission support facilities containing telemetry and telecommand data handling termini and preprocessing services.

  11. NEW ARCHITECTURE OF IP QOS MANAGEMENT SYSTEM

    Institute of Scientific and Technical Information of China (English)

    Jiao Li; Cui Yidong; Lin Yu; Wang Wendong; Cheng Shiduan

    2006-01-01

    Based on the analysis of current Quality of Service (QoS) management on IP network, new generation of QoS architecture QoSAF is proposed. QoSAF is divided into three layers: resource control layer, network service layer and business layer. QoS management is accomplished by interactivity of layers. In this architecture, mechanism of feedback control enhances the functions of resource management and system monitoring. The principle of design and logical architecture of system is discussed in detail.

  12. VIRTUAL INSTRUMENT SYSTEM SOFTWARE ARCHITECTURE DESCRIPTION LANGUAGE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In software engineering, an architecture description language (ADL) is intended to aid designers in defining software architectures in terms of abstractions that they find useful, and in making a smooth transi- tion to code. Based on ADL, the concept and models of the Virtual instrunent system Software architecture Description Language (VSDL) is provided in this paper. The VSDL put forward provides a new method for vir- tual instrunent system's application design and development by describing the virtual instrument system soft- ware architecture effectively. In this paper, the model description、component description and line description are analyzed in detail, and the structure language based on the model is also provided. VSDL provides a smooth interface to graphic software platform, and has been applied to many virtual instrument systems' inte- gration and already yielded good results both in technology and economy.

  13. Architecture for Integrated System Health Management Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Managing the health of vehicle, crew, and habitat systems is a primary function of flight controllers today. We propose to develop an architecture for automating...

  14. Fault tolerant architecture for artificial olfactory system

    Science.gov (United States)

    Lotfivand, Nasser; Nizar Hamidon, Mohd; Abdolzadeh, Vida

    2015-05-01

    In this paper, to cover and mask the faults that occur in the sensing unit of an artificial olfactory system, a novel architecture is offered. The proposed architecture is able to tolerate failures in the sensors of the array and the faults that occur are masked. The proposed architecture for extracting the correct results from the output of the sensors can provide the quality of service for generated data from the sensor array. The results of various evaluations and analysis proved that the proposed architecture has acceptable performance in comparison with the classic form of the sensor array in gas identification. According to the results, achieving a high odor discrimination based on the suggested architecture is possible.

  15. Algorithms, architectures and information systems security

    CERN Document Server

    Sur-Kolay, Susmita; Nandy, Subhas C; Bagchi, Aditya

    2008-01-01

    This volume contains articles written by leading researchers in the fields of algorithms, architectures, and information systems security. The first five chapters address several challenging geometric problems and related algorithms. These topics have major applications in pattern recognition, image analysis, digital geometry, surface reconstruction, computer vision and in robotics. The next five chapters focus on various optimization issues in VLSI design and test architectures, and in wireless networks. The last six chapters comprise scholarly articles on information systems security coverin

  16. Advanced connection systems for architectural glazing

    CERN Document Server

    Afghani Khoraskani, Roham

    2015-01-01

    This book presents the findings of a detailed study to explore the behavior of architectural glazing systems during and after an earthquake and to develop design proposals that will mitigate or even eliminate the damage inflicted on these systems. The seismic behavior of common types of architectural glazing systems are investigated and causes of damage to each system, identified. Furthermore, depending on the geometrical and structural characteristics, the ultimate horizontal load capacity of glass curtain wall systems is defined based on the stability of the glass components. Detailed attention is devoted to the incorporation of advanced connection devices between the structure of the building and the building envelope system in order to minimize the damage to glazed components. An innovative new connection device is introduced that results in a delicate and functional system easily incorporated into different architectural glazing systems, including those demanding maximum transparency.

  17. The BWS Open Business Enterprise System Architecture

    Directory of Open Access Journals (Sweden)

    Cristian IONITA

    2011-01-01

    Full Text Available Business process management systems play a central role in supporting the business operations of medium and large organizations. This paper analyses the properties current business enterprise systems and proposes a new application type called Open Business Enterprise System. A new open system architecture called Business Workflow System is proposed. This architecture combines the instruments for flexible data management, business process management and integration into a flexible system able to manage modern business operations. The architecture was validated by implementing it into the DocuMentor platform used by major companies in Romania and US. These implementations offered the necessary data to create and refine an enterprise integration methodology called DMCPI. The final section of the paper presents the concepts, stages and techniques employed by the methodology.

  18. The Earth Observing System (EOS) Ground System: Leveraging an Existing Operational Ground System Infrastructure to Support New Missions

    Science.gov (United States)

    Hardison, David; Medina, Johnny; Dell, Greg

    2016-01-01

    The Earth Observer System (EOS) was officially established in 1990 and went operational in December 1999 with the launch of its flagship spacecraft Terra. Aqua followed in 2002 and Aura in 2004. All three spacecraft are still operational and producing valuable scientific data. While all are beyond their original design lifetime, they are expected to remain viable well into the 2020s. The EOS Ground System is a multi-mission system based at NASA Goddard Space Flight Center that supports science and spacecraft operations for these three missions. Over its operational lifetime to date, the EOS Ground System has evolved as needed to accommodate mission requirements. With an eye towards the future, several updates are currently being deployed. Subsystem interconnects are being upgraded to reduce data latency and improve system performance. End-of-life hardware and operating systems are being replaced to mitigate security concerns and eliminate vendor support gaps. Subsystem hardware is being consolidated through the migration to Virtual Machine based platforms. While mission operations autonomy was not a design goal of the original system concept, there is an active effort to apply state-of-the-art products from the Goddard Mission Services Evolution Center (GMSEC) to facilitate automation where possible within the existing heritage architecture. This presentation will provide background information on the EOS ground system architecture and evolution, discuss latest improvements, and conclude with the results of a recent effort that investigated how the current system could accommodate a proposed new earth science mission.

  19. The architecture of enterprise hospital information system.

    Science.gov (United States)

    Lu, Xudong; Duan, Huilong; Li, Haomin; Zhao, Chenhui; An, Jiye

    2005-01-01

    Because of the complexity of the hospital environment, there exist a lot of medical information systems from different vendors with incompatible structures. In order to establish an enterprise hospital information system, the integration among these heterogeneous systems must be considered. Complete integration should cover three aspects: data integration, function integration and workflow integration. However most of the previous design of architecture did not accomplish such a complete integration. This article offers an architecture design of the enterprise hospital information system based on the concept of digital neural network system in hospital. It covers all three aspects of integration, and eventually achieves the target of one virtual data center with Enterprise Viewer for users of different roles. The initial implementation of the architecture in the 5-year Digital Hospital Project in Huzhou Central hospital of Zhejiang Province is also described.

  20. Architecture for Pseudo Acausal Evolvable Embedded Systems

    CERN Document Server

    Abubakr, Mohd

    2007-01-01

    Advances in semiconductor technology are contributing to the increasing complexity in the design of embedded systems. Architectures with novel techniques such as evolvable nature and autonomous behavior have engrossed lot of attention. This paper demonstrates conceptually evolvable embedded systems can be characterized basing on acausal nature. It is noted that in acausal systems, future input needs to be known, here we make a mechanism such that the system predicts the future inputs and exhibits pseudo acausal nature. An embedded system that uses theoretical framework of acausality is proposed. Our method aims at a novel architecture that features the hardware evolability and autonomous behavior alongside pseudo acausality. Various aspects of this architecture are discussed in detail along with the limitations.

  1. SDOE 650: System Architecture and Design

    Energy Technology Data Exchange (ETDEWEB)

    George, Colin B [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2014-07-01

    The proposed system is a test system that verifies the cables functionality in the expected environments defined in the ES. Verification methods include test, inspect, demonstrate, and analyze. Since we are defining the architecture for a test system we will focus on the customer expectations and requirements that will be satisfied or verified via testing

  2. Assessment of the integration capability of system architectures from a complex and distributed software systems perspective

    Science.gov (United States)

    Leuchter, S.; Reinert, F.; Müller, W.

    2014-06-01

    Procurement and design of system architectures capable of network centric operations demand for an assessment scheme in order to compare different alternative realizations. In this contribution an assessment method for system architectures targeted at the C4ISR domain is presented. The method addresses the integration capability of software systems from a complex and distributed software system perspective focusing communication, interfaces and software. The aim is to evaluate the capability to integrate a system or its functions within a system-of-systems network. This method uses approaches from software architecture quality assessment and applies them on the system architecture level. It features a specific goal tree of several dimensions that are relevant for enterprise integration. These dimensions have to be weighed against each other and totalized using methods from the normative decision theory in order to reflect the intention of the particular enterprise integration effort. The indicators and measurements for many of the considered quality features rely on a model based view on systems, networks, and the enterprise. That means it is applicable to System-of-System specifications based on enterprise architectural frameworks relying on defined meta-models or domain ontologies for defining views and viewpoints. In the defense context we use the NATO Architecture Framework (NAF) to ground respective system models. The proposed assessment method allows evaluating and comparing competing system designs regarding their future integration potential. It is a contribution to the system-of-systems engineering methodology.

  3. Reference Avionics Architecture for Lunar Surface Systems

    Science.gov (United States)

    Somervill, Kevin M.; Lapin, Jonathan C.; Schmidt, Oron L.

    2010-01-01

    Developing and delivering infrastructure capable of supporting long-term manned operations to the lunar surface has been a primary objective of the Constellation Program in the Exploration Systems Mission Directorate. Several concepts have been developed related to development and deployment lunar exploration vehicles and assets that provide critical functionality such as transportation, habitation, and communication, to name a few. Together, these systems perform complex safety-critical functions, largely dependent on avionics for control and behavior of system functions. These functions are implemented using interchangeable, modular avionics designed for lunar transit and lunar surface deployment. Systems are optimized towards reuse and commonality of form and interface and can be configured via software or component integration for special purpose applications. There are two core concepts in the reference avionics architecture described in this report. The first concept uses distributed, smart systems to manage complexity, simplify integration, and facilitate commonality. The second core concept is to employ extensive commonality between elements and subsystems. These two concepts are used in the context of developing reference designs for many lunar surface exploration vehicles and elements. These concepts are repeated constantly as architectural patterns in a conceptual architectural framework. This report describes the use of these architectural patterns in a reference avionics architecture for Lunar surface systems elements.

  4. Electrical system architecture having high voltage bus

    Science.gov (United States)

    Hoff, Brian Douglas [East Peoria, IL; Akasam, Sivaprasad [Peoria, IL

    2011-03-22

    An electrical system architecture is disclosed. The architecture has a power source configured to generate a first power, and a first bus configured to receive the first power from the power source. The architecture also has a converter configured to receive the first power from the first bus and convert the first power to a second power, wherein a voltage of the second power is greater than a voltage of the first power, and a second bus configured to receive the second power from the converter. The architecture further has a power storage device configured to receive the second power from the second bus and deliver the second power to the second bus, a propulsion motor configured to receive the second power from the second bus, and an accessory motor configured to receive the second power from the second bus.

  5. Where Artificial Intelligence and Neuroscience Meet: The Search for Grounded Architectures of Cognition

    Directory of Open Access Journals (Sweden)

    Frank van der Velde

    2010-01-01

    Full Text Available The collaboration between artificial intelligence and neuroscience can produce an understanding of the mechanisms in the brain that generate human cognition. This article reviews multidisciplinary research lines that could achieve this understanding. Artificial intelligence has an important role to play in research, because artificial intelligence focuses on the mechanisms that generate intelligence and cognition. Artificial intelligence can also benefit from studying the neural mechanisms of cognition, because this research can reveal important information about the nature of intelligence and cognition itself. I will illustrate this aspect by discussing the grounded nature of human cognition. Human cognition is perhaps unique because it combines grounded representations with computational productivity. I will illustrate that this combination requires specific neural architectures. Investigating and simulating these architectures can reveal how they are instantiated in the brain. The way these architectures implement cognitive processes could also provide answers to fundamental problems facing the study of cognition.

  6. A New System Architecture for Pervasive Computing

    CERN Document Server

    Ismail, Anis; Ismail, Ziad

    2011-01-01

    We present new system architecture, a distributed framework designed to support pervasive computing applications. We propose a new architecture consisting of a search engine and peripheral clients that addresses issues in scalability, data sharing, data transformation and inherent platform heterogeneity. Key features of our application are a type-aware data transport that is capable of extract data, and present data through handheld devices (PDA (personal digital assistant), mobiles, etc). Pervasive computing uses web technology, portable devices, wireless communications and nomadic or ubiquitous computing systems. The web and the simple standard HTTP protocol that it is based on, facilitate this kind of ubiquitous access. This can be implemented on a variety of devices - PDAs, laptops, information appliances such as digital cameras and printers. Mobile users get transparent access to resources outside their current environment. We discuss our system's architecture and its implementation. Through experimental...

  7. Formal Protection Architecture for Cloud Computing System

    Institute of Scientific and Technical Information of China (English)

    Yasha Chen; Jianpeng Zhao; Junmao Zhu; Fei Yan

    2014-01-01

    Cloud computing systems play a vital role in national securi-ty. This paper describes a conceptual framework called dual-system architecture for protecting computing environments. While attempting to be logical and rigorous, formalism meth-od is avoided and this paper chooses algebra Communication Sequential Process.

  8. An Architecture for Open Learning Management Systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Simos; Skordalakis, Manolis

    2003-01-01

    There exists an urgent demand on defining architectures for Learning Management Systems, so that high-level frameworks for understanding these systems can be discovered, and quality attributes like portability, interoperability, reusability and modifiability can be achieved. In this paper we propose

  9. Software system architecture for corporate user support

    Science.gov (United States)

    Sukhopluyeva, V. S.; Kuznetsov, D. Y.

    2017-01-01

    In this article, several existing ready-to-use solutions for the HelpDesk are reviewed. Advantages and disadvantages of these systems are identified. Architecture of software solution for a corporate user support system is presented in a form of the use case, state, and component diagrams described by using a unified modeling language (UML).

  10. Rapid phenotyping of alfalfa root system architecture

    Science.gov (United States)

    Root system architecture (RSA) influences the capacity of an alfalfa plant for symbiotic nitrogen fixation, nutrient uptake and water use efficiency, resistance to frost heaving, winterhardiness, and some pest and pathogen resistance. However, we currently lack a basic understanding of root system d...

  11. Suomi NPP Ground System Performance

    Science.gov (United States)

    Grant, K. D.; Bergeron, C.

    2013-12-01

    The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). JPSS will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The first satellite in the JPSS constellation, known as the Suomi National Polar-orbiting Partnership (Suomi NPP) satellite, was launched on 28 October 2011, and is currently undergoing product calibration and validation activities. As products reach a beta level of maturity, they are made available to the community through NOAA's Comprehensive Large Array-data Stewardship System (CLASS). CGS's data processing capability processes the satellite data from the Joint Polar Satellite System satellites to provide environmental data products (including Sensor Data Records (SDRs) and Environmental Data Records (EDRs)) to NOAA and Department of Defense (DoD) processing centers operated by the United States government. CGS is currently processing and delivering SDRs and EDRs for Suomi NPP and will continue through the lifetime of the Joint Polar Satellite System programs. Following the launch and sensor activation phase of the Suomi NPP mission, full volume data traffic is now flowing from the satellite through CGS's C3, data processing, and data delivery systems. Ground system performance is critical for this operational system. As part of early system checkout, Raytheon measured all aspects of data acquisition, routing, processing, and delivery to ensure operational performance requirements are met, and will continue to be met throughout the mission. Raytheon developed a tool to measure, categorize, and

  12. Architecture, systems research and computational sciences

    CERN Document Server

    2012-01-01

    The Winter 2012 (vol. 14 no. 1) issue of the Nexus Network Journal is dedicated to the theme “Architecture, Systems Research and Computational Sciences”. This is an outgrowth of the session by the same name which took place during the eighth international, interdisciplinary conference “Nexus 2010: Relationships between Architecture and Mathematics, held in Porto, Portugal, in June 2010. Today computer science is an integral part of even strictly historical investigations, such as those concerning the construction of vaults, where the computer is used to survey the existing building, analyse the data and draw the ideal solution. What the papers in this issue make especially evident is that information technology has had an impact at a much deeper level as well: architecture itself can now be considered as a manifestation of information and as a complex system. The issue is completed with other research papers, conference reports and book reviews.

  13. An architecture for mobile database management system

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In order to design a new kind of mobile database management system (DBMS) more suitable for mobile computing than the existent DBMS, the essence of database systems in mobile computing is analyzed. An opinion is introduced that the mobile database is a kind of dynamic distributed database, and the concept of virtual servers to translate the clients' mobility to the servers' mobility is proposed. Based on these opinions, a kind of architecture of mobile DBMS, which is of versatility, is presented. The architecture is composed of a virtual server and a local DBMS, the virtual server is the kernel of the architecture and its functions are described. Eventually, the server kernel of a mobile DBMS prototype is illustrated.

  14. Low Power Detection Architecture for MIMO Systems

    Directory of Open Access Journals (Sweden)

    Shirly Edward.A

    2013-06-01

    Full Text Available This paper presents an architecture for K-best List Sphere Decoder (LSD algorithm for Multiple Input Multiple Output (MIMO Systems using Xilinx System Generator. We made use of an efficient bit-serial architecture, Distributed Arithmetic(DA to reduce the computational complexity involved in the algorithm. The real-valued expanded channel matrix and received vectors are analyzed, designed and implemented using Xilinx Spartan-6 FPGA running at 100MHz. We compare the resource utilization of the conventional implementation of the algorithm with the proposed architecture for different number of layers. The conversion of multipliers into shift and adder units leads to area optimization and reduced power consumption. The total estimated power for our design is found to be 187mW.

  15. A NEW SYSTEM ARCHITECTURE FOR PERVASIVE COMPUTING

    Directory of Open Access Journals (Sweden)

    Anis ISMAIL

    2011-08-01

    Full Text Available We present new system architecture, a distributed framework designed to support pervasive computingapplications. We propose a new architecture consisting of a search engine and peripheral clients thataddresses issues in scalability, data sharing, data transformation and inherent platform heterogeneity. Keyfeatures of our application are a type-aware data transport that is capable of extract data, and presentdata through handheld devices (PDA (personal digital assistant, mobiles, etc. Pervasive computing usesweb technology, portable devices, wireless communications and nomadic or ubiquitous computing systems.The web and the simple standard HTTP protocol that it is based on, facilitate this kind of ubiquitousaccess. This can be implemented on a variety of devices - PDAs, laptops, information appliances such asdigital cameras and printers. Mobile users get transparent access to resources outside their currentenvironment. We discuss our system’s architecture and its implementation. Through experimental study,we show reasonable performance and adaptation for our system’s implementation for the mobile devices.

  16. Achieving Lights-Out Operation of SMAP Using Ground Data System Automation

    Science.gov (United States)

    Sanders, Antonio

    2013-01-01

    The approach used in the SMAP ground data system to provide reliable, automated capabilities to conduct unattended operations has been presented. The impacts of automation on the ground data system architecture were discussed, including the three major automation patterns identified for SMAP and how these patterns address the operations use cases. The architecture and approaches used by SMAP will set the baseline for future JPL Earth Science missions.

  17. The Research of System Architecture in Expert System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper illustrated the software architecture of our concretesafet y expert system. Three advanced technologies are proposed and have been applied to our expert system to greatly improve the intelligent level, which are human- compu ter interaction technology (conceptual model, dialogue management, interface ent ity and interface construct), intelligent agency user interface (IAUI) and compo nent technology. The i mportant character of the system architecture in our expert system is adapting a dvanced intelligent interface and scientific integration of various components d ifferent from common system architecture of expert system. Especially, in the in terface-friendly multimedia system intelligent interface is required.

  18. Information security considerations in open systems architectures

    Energy Technology Data Exchange (ETDEWEB)

    Klein, S.A. (Atlantic Research Corp., Rockville, MD (United States)); Menendez, J.N. (Atlantic Research Corp., Hanover, MD (United States))

    1993-02-01

    This paper is part of a series of papers invited by the IEEE POWER CONTROL CENTER WORKING GROUP concerning the changing designs of modern control centers. Papers invited by the Working Group discuss the following issues: Benefits of Openness, Criteria for Evaluating Open EMS Systems, Hardware Design, Configuration Management, Security, Project Management, Data Bases, SCADA, Inter and Intra-System Communications, and Man Machine Interfaces.'' This paper discusses information security and issues related to its achievement in open systems architectures. Beginning with a discussion of the goals of information security and their relation to open systems, the paper provides examples of the threats to electric utility computer systems and the consequences associated with these threats, presents basic countermeasures applicable to all computer systems, and discusses issues specific to open systems architectures.

  19. Advanced Ground Systems Maintenance Anomaly Detection Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project will develop the capability to identify anomalous conditions (indications to potential impending system failure) in ground system operations before such...

  20. JPSS Common Ground System Multimission Support

    Science.gov (United States)

    Jamilkowski, M. L.; Miller, S. W.; Grant, K. D.

    2013-12-01

    NOAA & NASA jointly acquire the next-generation civilian operational weather satellite: Joint Polar Satellite System (JPSS). JPSS contributes the afternoon orbit & restructured NPOESS ground system (GS) to replace the current Polar-orbiting Operational Environmental Satellite (POES) system run by NOAA. JPSS sensors will collect meteorological, oceanographic, climatological & solar-geophysical observations of the earth, atmosphere & space. The JPSS GS is the Common Ground System (CGS), consisting of Command, Control, & Communications (C3S) and Interface Data Processing (IDPS) segments, both developed by Raytheon Intelligence, Information & Services (IIS). CGS now flies the Suomi National Polar-orbiting Partnership (S-NPP) satellite, transfers its mission data between ground facilities and processes its data into Environmental Data Records for NOAA & Defense (DoD) weather centers. CGS will expand to support JPSS-1 in 2017. The JPSS CGS currently does data processing (DP) for S-NPP, creating multiple TBs/day across over two dozen environmental data products (EDPs). The workload doubles after JPSS-1 launch. But CGS goes well beyond S-NPP & JPSS mission management & DP by providing data routing support to operational centers & missions worldwide. The CGS supports several other missions: It also provides raw data acquisition, routing & some DP for GCOM-W1. The CGS does data routing for numerous other missions & systems, including USN's Coriolis/Windsat, NASA's SCaN network (including EOS), NSF's McMurdo Station communications, Defense Meteorological Satellite Program (DMSP), and NOAA's POES & EUMETSAT's MetOp satellites. Each of these satellite systems orbits the Earth 14 times/day, downlinking data once or twice/orbit at up to 100s of MBs/second, to support the creation of 10s of TBs of data/day across 100s of EDPs. Raytheon and the US government invested much in Raytheon's mission-management, command & control and data-processing products & capabilities. CGS's flexible

  1. Marshall Space Flight Center Ground Systems Development and Integration

    Science.gov (United States)

    Wade, Gina

    2016-01-01

    Ground Systems Development and Integration performs a variety of tasks in support of the Mission Operations Laboratory (MOL) and other Center and Agency projects. These tasks include various systems engineering processes such as performing system requirements development, system architecture design, integration, verification and validation, software development, and sustaining engineering of mission operations systems that has evolved the Huntsville Operations Support Center (HOSC) into a leader in remote operations for current and future NASA space projects. The group is also responsible for developing and managing telemetry and command configuration and calibration databases. Personnel are responsible for maintaining and enhancing their disciplinary skills in the areas of project management, software engineering, software development, software process improvement, telecommunications, networking, and systems management. Domain expertise in the ground systems area is also maintained and includes detailed proficiency in the areas of real-time telemetry systems, command systems, voice, video, data networks, and mission planning systems.

  2. Devonian lacustrine shore zone architecture imaged with ground penetrating radar

    DEFF Research Database (Denmark)

    Andrews, Steven D.; Moreau, Julien; Archer, Stuart

    deposition was limited to intermittent events where sediment was laid down on a water saturated substrate. Some of these may have occurr­­­ed subaqueously as small scale turbidity flows. High resolution fluctuations in lake level resulted in periodic short lived reworking events along the lake margin which...... produced amalgamated sands, forming low relief bars. Shore zone reworking is likely to have occurred over a wide area as the lake margin migrated back and forth, and gradually transgressed. Continued transgression forced fluvial systems back towards the basin margin....

  3. Devonian lacustrine shore zone architecture imaged with ground penetrating radar

    DEFF Research Database (Denmark)

    Andrews, Steven D.; Moreau, Julien; Archer, Stuart

    of these units. The cycles are on average 15 m thick and comprise deep lake, perennial lake, playa and shore zone facies (2 to 3.5 m in thickness). High resolution sedimentary logging and the construction of photo-panels were combined with high resolution GPR profiling (250 MHz). To ensure close ties between...... produced amalgamated sands, forming low relief bars. Shore zone reworking is likely to have occurred over a wide area as the lake margin migrated back and forth, and gradually transgressed. Continued transgression forced fluvial systems back towards the basin margin....

  4. A Microprocessor Architecture for Bibliographic Retrieval System.

    Science.gov (United States)

    Martella, G.; Gobbi, G.

    1981-01-01

    Proposes a microprocessor-based architecture that makes large use of parallelism both in processing and in retrieval operations. The proposed system consists of three functional blocks: the query processor, simple query executers, and the answer composer. Twenty-one references are listed. (FM)

  5. A Reference Architecture for Workflow Management Systems

    NARCIS (Netherlands)

    Grefen, Paul; Remmerts de Vries, Remmert

    1998-01-01

    In the workflow management field, fast developments are taking place. A growing number of systems is currently under development, both in academic and commercial environments. Consequently, a wide variety of ad hoc architectures has come into existence. Reference models are necessary, however, to al

  6. Integrated computer control system architectural overview

    Energy Technology Data Exchange (ETDEWEB)

    Van Arsdall, P.

    1997-06-18

    This overview introduces the NIF Integrated Control System (ICCS) architecture. The design is abstract to allow the construction of many similar applications from a common framework. This summary lays the essential foundation for understanding the model-based engineering approach used to execute the design.

  7. Development of Architectures for Internet Telerobotics Systems

    CERN Document Server

    Bambang, Riyanto

    2008-01-01

    This paper presents our experience in developing and implementing Internet telerobotics system. Internet telerobotics system refers to a robot system controlled and monitored remotely through the Internet. A robot manipulator with five degrees of freedom, called Mentor, is employed. Client-server architecture is chosen as a platform for our Internet telerobotics system. Three generations of telerobotics systems have evolved in this research. The first generation was based on CGI and two tiered architecture, where a client presents a Graphical User Interface to the user, and utilizes the user's data entry and actions to perform requests to robot server running on a different machine. The second generation was developed using Java. We also employ Java 3D for creating and manipulating 3D geometry of manipulator links and for constructing the structures used in rendering that geometry, resulting in 3D robot movement simulation presented to the users(clients) through their web browser. Recent development in our In...

  8. Platform Architecture for Decentralized Positioning Systems

    Directory of Open Access Journals (Sweden)

    Zakaria Kasmi

    2017-04-01

    Full Text Available A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

  9. Platform Architecture for Decentralized Positioning Systems.

    Science.gov (United States)

    Kasmi, Zakaria; Norrdine, Abdelmoumen; Blankenbach, Jörg

    2017-04-26

    A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies) and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

  10. The architecture of a modern military health information system.

    Science.gov (United States)

    Mukherji, Raj J; Egyhazy, Csaba J

    2004-06-01

    This article describes a melding of a government-sponsored architecture for complex systems with open systems engineering architecture developed by the Institute for Electrical and Electronics Engineers (IEEE). Our experience in using these two architectures in building a complex healthcare system is described in this paper. The work described shows that it is possible to combine these two architectural frameworks in describing the systems, operational, and technical views of a complex automation system. The advantage in combining the two architectural frameworks lies in the simplicity of implementation and ease of understanding of automation system architectural elements by medical professionals.

  11. System Engineering Strategy for Distributed Multi-Purpose Simulation Architectures

    Science.gov (United States)

    Bhula, Dlilpkumar; Kurt, Cindy Marie; Luty, Roger

    2007-01-01

    This paper describes the system engineering approach used to develop distributed multi-purpose simulations. The multi-purpose simulation architecture focuses on user needs, operations, flexibility, cost and maintenance. This approach was used to develop an International Space Station (ISS) simulator, which is called the International Space Station Integrated Simulation (ISIS)1. The ISIS runs unmodified ISS flight software, system models, and the astronaut command and control interface in an open system design that allows for rapid integration of multiple ISS models. The initial intent of ISIS was to provide a distributed system that allows access to ISS flight software and models for the creation, test, and validation of crew and ground controller procedures. This capability reduces the cost and scheduling issues associated with utilizing standalone simulators in fixed locations, and facilitates discovering unknowns and errors earlier in the development lifecycle. Since its inception, the flexible architecture of the ISIS has allowed its purpose to evolve to include ground operator system and display training, flight software modification testing, and as a realistic test bed for Exploration automation technology research and development.

  12. Telemedicine system interoperability architecture: concept description and architecture overview.

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Richard Layne, II

    2004-05-01

    In order for telemedicine to realize the vision of anywhere, anytime access to care, it must address the question of how to create a fully interoperable infrastructure. This paper describes the reasons for pursuing interoperability, outlines operational requirements that any interoperability approach needs to consider, proposes an abstract architecture for meeting these needs, identifies candidate technologies that might be used for rendering this architecture, and suggests a path forward that the telemedicine community might follow.

  13. Applications of CCSDS recommendations to Integrated Ground Data Systems (IGDS)

    Science.gov (United States)

    Mizuta, Hiroshi; Martin, Daniel; Kato, Hatsuhiko; Ihara, Hirokazu

    1993-01-01

    This paper describes an application of the CCSDS Principle Network (CPH) service model to communications network elements of a postulated Integrated Ground Data System (IGDS). Functions are drawn principally from COSMICS (Cosmic Information and Control System), an integrated space control infrastructure, and the Earth Observing System Data and Information System (EOSDIS) Core System (ECS). From functional requirements, this paper derives a set of five communications network partitions which, taken together, support proposed space control infrastructures and data distribution systems. Our functional analysis indicates that the five network partitions derived in this paper should effectively interconnect the users, centers, processors, and other architectural elements of an IGDS. This paper illustrates a useful application of the CCSDS (Consultive Committee for Space Data Systems) Recommendations to ground data system development.

  14. Ground Collision Avoidance System (Igcas)

    Science.gov (United States)

    Skoog, Mark A (Inventor); Prosser, Kevin (Inventor); Hook, Loyd (Inventor)

    2017-01-01

    The present invention is a system and method for aircraft ground collision avoidance (iGCAS) comprising a modular array of software, including a sense own state module configured to gather data to compute trajectory, a sense terrain module including a digital terrain map (DTM) and map manger routine to store and retrieve terrain elevations, a predict collision threat module configured to generate an elevation profile corresponding to the terrain under the trajectory computed by said sense own state module, a predict avoidance trajectory module configured to simulate avoidance maneuvers ahead of the aircraft, a determine need to avoid module configured to determine which avoidance maneuver should be used, when it should be initiated, and when it should be terminated, a notify Module configured to display each maneuver's viability to the pilot by a colored GUI, a pilot controls module configured to turn the system on and off, and an avoid module configured to define how an aircraft will perform avoidance maneuvers through 3-dimensional space.

  15. The NOAA Satellite Observing System Architecture Study

    Science.gov (United States)

    Volz, Stephen; Maier, Mark; Di Pietro, David

    2016-01-01

    NOAA is beginning a study, the NOAA Satellite Observing System Architecture (NSOSA) study, to plan for the future operational environmental satellite system that will follow GOES and JPSS, beginning about 2030. This is an opportunity to design a modern architecture with no pre-conceived notions regarding instruments, platforms, orbits, etc. The NSOSA study will develop and evaluate architecture alternatives to include partner and commercial alternatives that are likely to become available. The objectives will include both functional needs and strategic characteristics (e.g., flexibility, responsiveness, sustainability). Part of this study is the Space Platform Requirements Working Group (SPRWG), which is being commissioned by NESDIS. The SPRWG is charged to assess new or existing user needs and to provide relative priorities for observational needs in the context of the future architecture. SPRWG results will serve as input to the process for new foundational (Level 0 and Level 1) requirements for the next generation of NOAA satellites that follow the GOES-R, JPSS, DSCOVR, Jason-3, and COSMIC-2 missions.

  16. System of Systems (SoS) Architecture Centric Acquisition

    Science.gov (United States)

    2016-06-07

    operation of the Software Engineering Institute, a federally funded research and development center. The Government of the United States has a royalty- free ...WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Carnegie Mellon University , Software Engineering Institute,Pittsburgh,PA...Architecture Evaluation, System and Software Architecture Evaluation, Acquisition Planning Workshop, etc. – Capture comments and suggestions

  17. BWS Open System Architecture Security Assessment

    Directory of Open Access Journals (Sweden)

    Cristian Ionita

    2011-12-01

    Full Text Available Business process management systems play a central role in supporting the business operations of medium and large organizations. Because of this the security characteristics of these systems are becoming very important. The present paper describes the BWS architecture used to implement the open process aware information system DocuMentor. Using the proposed platform, the article identifies the security characteristics of such systems, shows the correlation between these characteristics and the security features implemented by the platform and presents examples of how the security of such systems can be enhanced using the extension mechanism.

  18. A new architecture for enterprise information systems.

    Science.gov (United States)

    Covvey, H D; Stumpf, J J

    1999-01-01

    Irresistible economic and technical forces are forcing healthcare institutions to develop regionalized services such as consolidated or virtual laboratories. Technical realities, such as the lack of an enabling enterprise-level information technology (IT) integration infrastructure, the existence of legacy systems, and non-existent or embryonic enterprise-level IT services organizations, are delaying or frustrating the achievement of the desired configuration of shared services. On attempting to address this matter, we discover that the state-of-the-art in integration technology is not wholly adequate, and itself becomes a barrier to the full realization of shared healthcare services. In this paper we report new work from the field of Co-operative Information Systems that proposes a new architecture of systems that are intrinsically cooperation-enabled, and we extend this architecture to both the regional and national scales.

  19. Simple system for locating ground loops.

    Science.gov (United States)

    Bellan, P M

    2007-06-01

    A simple low-cost system for rapid identification of the cables causing ground loops in complex instrumentation configurations is described. The system consists of an exciter module that generates a 100 kHz ground loop current and a detector module that determines which cable conducts this test current. Both the exciter and detector are magnetically coupled to the ground circuit so there is no physical contact to the instrumentation system under test.

  20. Next-Generation Ground Network Architecture for Communications and Tracking of Interplanetary Smallsats

    Science.gov (United States)

    Cheung, K.-M.; Abraham, D.; Arroyo, B.; Basilio, E.; Babuscia, A.; Duncan, C.; Lee, D.; Oudrhiri, K.; Pham, T.; Staehle, R.; Waldherr, S.; Welz, G.; Wyatt, J.; Lanucara, M.; Malphrus, B.; Bellardo, J.; Puig-Suari, J.; Corpino, S.

    2015-08-01

    As small spacecraft venture out of Earth orbit, they will encounter challenges not experienced or addressed by the numerous low Earth orbit (LEO) CubeSat and smallsat missions staged to date. The LEO CubeSats typically use low-cost, proven CubeSat radios, antennas, and university ground stations with small apertures. As more ambitious yet cost-constrained space mission concepts to the Moon and beyond are being developed, CubeSats and smallsats have the potential to provide a more affordable platform for exploring deep space and performing the associated science. Some of the challenges that have, so far, slowed the proliferation of small interplanetary spacecraft are those of communications and navigation. Unlike Earth-orbiting spacecraft that navigate via government services such as North American Aerospace Defense Command's (NORAD's) tracking elements or the Global Positioning Satellite (GPS) system, interplanetary spacecraft would have to operate in a fundamentally different manner that allows the deep-space communications link to provide both command/telemetry and the radiometric data needed for navigation. Another challenge occurs when smallsat and CubeSat missions would involve multiple spacecraft that require near-simultaneous communication and/or navigation, but have a very limited number of ground antenna assets, as well as available spectrum, to support their links. To address these challenges, the Jet Propulsion Laboratory (JPL) and the Deep Space Network (DSN) it operates for NASA are pursuing the following efforts: (1) Developing a CubeSat-compatible, DSN-compatible transponder -- Iris -- which a commercial vendor can then make available as a product line. (2) Developing CubeSat-compatible high-gain antennas -- deployable reflectors, reflectarrays, and inflatable antennas. (3) Streamlining access and utilization processes for DSN and related services such as the Advanced Multi-Mission Operations System (AMMOS). (4) Developing methodologies for tracking

  1. 46 CFR 183.376 - Grounded distribution systems (neutral grounded).

    Science.gov (United States)

    2010-10-01

    ... propulsion, power, lighting, or distribution system having a neutral bus or conductor must have the neutral..., circuit breaker, or fuse in the neutral conductor of the bus-tie feeder connecting the emergency... that aluminum grounding conductors must not be used....

  2. Joint Polar Satellite System Common Ground System Overview

    Science.gov (United States)

    Jamilkowski, M. L.; Smith, D. C.

    2011-12-01

    segments to implement proper security controls and directly manage integration, test & verification of product segments into the system. O&S operates the JPSS CGS, performs all mission operations and provides onsite support & logistics. O&S responsibilities range from developing, training, maintaining, and executing operational procedures; tracking/resolving anomalies; scheduling, measuring, trending and tracking all Program resources; to securing all assets. O&S has operated/supported the NPP C3S & IDPS baselines since Oct 2008 and Jul 2009 deliveries, respectively. Sustainment updates & maintains H/W & S/W baselines at Raytheon facilities in Colorado & Nebraska. They have done this for the NPP C3S & IDPS baselines since Oct 2008 and Jul 2009, respectively. This presentation will also give an overview of the JPSS CGS ground architecture features & enhancements for the JPSS (post-NPP) era. These include: C3S-provided space-to-ground connectivity, reliable/secure data delivery and insight/oversight of total operations; added ground receptor sites to reduce data latency; delivery of added sensor data products from NPP-like and additional JPSS sensors and expansion to 2 more Centrals (FNMOC & NAVO). The IDPS will act as a buffer to minimize changes in how users request/receive data products.

  3. Functional Interface Considerations within an Exploration Life Support System Architecture

    Science.gov (United States)

    Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

    2016-01-01

    As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

  4. Mapping a classification system to architectural education

    DEFF Research Database (Denmark)

    Hermund, Anders; Klint, Lars; Rostrup, Nicolai

    2015-01-01

    This paper examines to what extent a new classification system, Cuneco Classification System, CCS, proves useful in the education of architects, and to what degree the aim of an architectural education, rather based on an arts and crafts approach than a polytechnic approach, benefits from...... the distinct terminology of the classification system. The method used to examine the relationship between education, practice and the CCS bifurcates in a quantitative and a qualitative exploration: Quantitative comparison of the curriculum with the students’ own descriptions of their studies through...

  5. The sustainable IT architecture resilient information systems

    CERN Document Server

    Bonnet, P

    2009-01-01

    This book focuses on Service Oriented Architecture (SOA), the basis of sustainable and more agile IT systems that are able to adapt themselves to new trends and manage processes involving a third party. The discussion is based on the public Praxeme method and features a number of examples taken from large SOA projects which were used to rewrite the information systems of an insurance company; as such, decision-makers, creators of IT systems, programmers and computer scientists, as well as those who will use these new developments, will find this a useful resource

  6. New bus architecture for distributed avionic systems

    Energy Technology Data Exchange (ETDEWEB)

    Leonard, W.B.; Chow, K.K.

    1983-01-01

    The authors discuss a bus architecture which offers several advantages over conventional buses for a large selection of applications, and which allows for both interrupts and error checking. The bus may be expanded in the form of a tree with many processors, memories, and input/output devices distributed freely throughout the system. Therefore, it is inherently a multiprocessor bus and is well suited for systems in which a central controller controls several subordinate processors and devices. Its low overhead plus large capacity for expansion make it appropriate for a wide range of future systems.

  7. Joint Polar Satellite System Common Ground System Overview

    Science.gov (United States)

    Jamilkowski, M. L.; Miller, S. W.; Grant, K. D.

    2012-12-01

    launched. The CGS also provides raw data processing for GCOM-W1 to support further processing by NOAA. The CGS provides data routing for numerous missions, including Coriolis/Windsat, NASA SCaN (including EOS), DMSP, POES and Metop. Each of these satellites orbits the Earth 14 times a day, downlinking mission data once or twice per orbit at up to hundreds of megabits per second, to support the generation of tens of terabytes per day across hundreds of environmental data products. This presentation will provide an overview of the JPSS CGS ground architecture features, ConOps, key specifications, developmental and operational facilities, present and future supported missions, and recent enhancements for support of the Suomi NPP mission. Key features include redundant mission management, a global commercial communications network for data routing and delivery, high-availability and low-latency data processing, a DoD 8500 compliant security posture, and a modular and extensible architecture. Key recent enhancements include a technology refresh of IDPS hardware to improve supportability and latency performance, incorporation of data routing and processing for the Global Change Observation Mission (GCOM), and significant software upgrades to improve overall system robustness and operability. These enhancements lay the foundation for the future evolution of the CGS to support additional missions.

  8. Modernization of the Cassini Ground System

    Science.gov (United States)

    Razo, Gus; Fujii, Tammy

    2014-01-01

    The Cassini Spacecraft and its ground system have been operational for over 16 years. Modernization presents several challenges due to the personnel, processes, and tools already invested and embedded into the current ground system structure. Every mission's ground system has its own unique complexities and challenges, involving various organizational units. As any mission from its inception to its execution, schedules are always tight. This forces GDS engineers to implement a working ground system that is not necessarily fully optimized. Ground system challenges increase as technology evolves and cyber threats become more sophisticated. Cassini's main challenges were due to its ground system existing before many security requirements were levied on the multi-mission tools and networks. This caused a domino effect on Cassini GDS tools that relied on outdated technological features. In the aerospace industry reliable and established technology is preferred over innovative yet less proven technology. Loss of data for a spacecraft mission can be catastrophic; therefore, there is a reluctance to make changes and updates to the ground system. Nevertheless, all missions and associated teams face the need to modernize their processes and tools. Systems development methods from well-known system analysis and design principles can be applied to many missions' ground systems. Modernization should always be considered, but should be done in such a way that it does not affect flexibility nor interfere with established practices. Cassini has accomplished a secure and efficient ground data system through periodic updates. The obstacles faced while performing the modernization of the Cassini ground system will be outlined, as well as the advantages and challenges that were encountered.

  9. Development of Architectures for Internet Telerobotics Systems

    Institute of Scientific and Technical Information of China (English)

    Riyanto T. Bambang

    2007-01-01

    This paper presents our experience in developing and implementing Internet telerobotics system. Internet telerobotics system refers to a robot system controlled and monitored remotely through the Internet. A robot manipulator with five degrees of freedom, called Mentor, is employed. Client-server architecture is chosen as a platform for our Internet telerobotics system.Three generations of telerobotics systems have evolved in this research. The first generation was based on CGI and two tiered architectures, where a client presents a Graphical User Interface to the user, and utilizes the user's data entry and actions to perform requests to robot server running on a different machine. The second generation was developed using Java. We also employ Java 3D for creating and manipulating 3D geometry of manipulator links, and for constructing the structures used in rendering that geometry, resulting in 3D robot movement simulation presented to the users (clients) through their web browser.Recent development in our Internet telerobotics includes object recognition through image captured by a camera, which poses challenging problem, giving the undeterministic latency of the Internet. The third generation is centered around the use of CORBA for development platform of distributed internet telerobotics system, aimed at distributing task of telerobotics system.

  10. A Grid Architecture for Manufacturing Database System

    Directory of Open Access Journals (Sweden)

    Laurentiu CIOVICĂ

    2011-06-01

    Full Text Available Before the Enterprise Resource Planning concepts business functions within enterprises were supported by small and isolated applications, most of them developed internally. Yet today ERP platforms are not by themselves the answer to all organizations needs especially in times of differentiated and diversified demands among end customers. ERP platforms were integrated with specialized systems for the management of clients, Customer Relationship Management and vendors, Supplier Relationship Management. They were integrated with Manufacturing Execution Systems for better planning and control of production lines. In order to offer real time, efficient answers to the management level, ERP systems were integrated with Business Intelligence systems. This paper analyses the advantages of grid computing at this level of integration, communication and interoperability between complex specialized informatics systems with a focus on the system architecture and data base systems.

  11. Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

    Science.gov (United States)

    Harper, R. E.; Alger, L. S.; Babikyan, C. A.; Butler, B. P.; Friend, S. A.; Ganska, R. J.; Lala, J. H.; Masotto, T. K.; Meyer, A. J.; Morton, D. P.

    1992-01-01

    Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions.

  12. REST in practice Hypermedia and systems architecture

    CERN Document Server

    Webber, Jim; Robinson, Ian

    2010-01-01

    Why don't typical enterprise projects go as smoothly as projects you develop for the Web? Does the REST architectural style really present a viable alternative for building distributed systems and enterprise-class applications? In this insightful book, three SOA experts provide a down-to-earth explanation of REST and demonstrate how you can develop simple and elegant distributed hypermedia systems by applying the Web's guiding principles to common enterprise computing problems. You'll learn techniques for implementing specific Web technologies and patterns to solve the needs of a typical com

  13. Architectural frameworks: defining the structures for implementing learning health systems.

    Science.gov (United States)

    Lessard, Lysanne; Michalowski, Wojtek; Fung-Kee-Fung, Michael; Jones, Lori; Grudniewicz, Agnes

    2017-06-23

    The vision of transforming health systems into learning health systems (LHSs) that rapidly and continuously transform knowledge into improved health outcomes at lower cost is generating increased interest in government agencies, health organizations, and health research communities. While existing initiatives demonstrate that different approaches can succeed in making the LHS vision a reality, they are too varied in their goals, focus, and scale to be reproduced without undue effort. Indeed, the structures necessary to effectively design and implement LHSs on a larger scale are lacking. In this paper, we propose the use of architectural frameworks to develop LHSs that adhere to a recognized vision while being adapted to their specific organizational context. Architectural frameworks are high-level descriptions of an organization as a system; they capture the structure of its main components at varied levels, the interrelationships among these components, and the principles that guide their evolution. Because these frameworks support the analysis of LHSs and allow their outcomes to be simulated, they act as pre-implementation decision-support tools that identify potential barriers and enablers of system development. They thus increase the chances of successful LHS deployment. We present an architectural framework for LHSs that incorporates five dimensions-goals, scientific, social, technical, and ethical-commonly found in the LHS literature. The proposed architectural framework is comprised of six decision layers that model these dimensions. The performance layer models goals, the scientific layer models the scientific dimension, the organizational layer models the social dimension, the data layer and information technology layer model the technical dimension, and the ethics and security layer models the ethical dimension. We describe the types of decisions that must be made within each layer and identify methods to support decision-making. In this paper, we outline

  14. STARS: The Space Transportation Architecture Risk System

    Science.gov (United States)

    Greenberg, Joel S.

    1997-01-01

    Because of the need to perform comparisons between transportation systems that are likely to have significantly different levels of risk, both because of differing degrees of freedom in achieving desired performance levels and their different states of development and utilization, an approach has been developed for performing early comparisons of transportation architectures explicitly taking into account quantitative measures of uncertainty and resulting risk. The approach considers the uncertainty associated with the achievement of technology goals, the effect that the achieved level of technology will have on transportation system performance and the relationship between transportation system performance/capability and the ability to accommodate variations in payload mass. The consequences of system performance are developed in terms of expected values and associated standard deviations of nonrecurring, recurring and the present value of transportation system life cycle cost. Typical results are presented to illustrate the application of the methodology.

  15. Engineering a Multimission Approach to Navigation Ground Data System Operations

    Science.gov (United States)

    Gerasimatos, Dimitrios V.; Attiyah, Ahlam A.

    2012-01-01

    The Mission Design and Navigation (MDNAV) Section at the Jet Propulsion Laboratory (JPL) supports many deep space and earth orbiting missions from formulation to end of mission operations. The requirements of these missions are met with a multimission approach to MDNAV ground data system (GDS) infrastructure capable of being shared and allocated in a seamless and consistent manner across missions. The MDNAV computing infrastructure consists of compute clusters, network attached storage, mission support area facilities, and desktop hardware. The multimission architecture allows these assets, and even personnel, to be leveraged effectively across the project lifecycle and across multiple missions simultaneously. It provides a more robust and capable infrastructure to each mission than might be possible if each constructed its own. It also enables a consistent interface and environment within which teams can conduct all mission analysis and navigation functions including: trajectory design; ephemeris generation; orbit determination; maneuver design; and entry, descent, and landing analysis. The savings of these efficiencies more than offset the costs of increased complexity and other challenges that had to be addressed: configuration management, scheduling conflicts, and competition for resources. This paper examines the benefits of the multimission MDNAV ground data system infrastructure, focusing on the hardware and software architecture. The result is an efficient, robust, scalable MDNAV ground data system capable of supporting more than a dozen active missions at once.

  16. Nova control system: goals, architecture, and system design

    Energy Technology Data Exchange (ETDEWEB)

    Suski, G.J.; Duffy, J.M.; Gritton, D.G.; Holloway, F.W.; Krammen, J.R.; Ozarski, R.G.; Severyn, J.R.; Van Arsdall, P.J.

    1982-05-19

    The control system for the Nova laser must operate reliably in a harsh pulse power environment and satisfy requirements of technical functionality, flexibility, maintainability and operability. It is composed of four fundamental subsystems: Power Conditioning, Alignment, Laser Diagnostics, and Target Diagnostics, together with a fifth, unifying subsystem called Central Controls. The system architecture utilizes a collection of distributed microcomputers, minicomputers, and components interconnected through high speed fiber optic communications systems. The design objectives, development strategy and architecture of the overall control system and each of its four fundamental subsystems are discussed. Specific hardware and software developments in several areas are also covered.

  17. The Architecture of Financial Risk Management Systems

    Directory of Open Access Journals (Sweden)

    Iosif ZIMAN

    2013-01-01

    Full Text Available The architecture of systems dedicated to risk management is probably one of the more complex tasks to tackle in the world of finance. Financial risk has been at the center of attention since the explosive growth of financial markets and even more so after the 2008 financial crisis. At multiple levels, financial companies, financial regulatory bodies, governments and cross-national regulatory bodies, all have put the subject of financial risk in particular and the way it is calculated, managed, reported and monitored under intense scrutiny. As a result the technology underpinnings which support the implementation of financial risk systems has evolved considerably and has become one of the most complex areas involving systems and technology in the context of the financial industry. We present the main paradigms, require-ments and design considerations when undertaking the implementation of risk system and give examples of user requirements, sample product coverage and performance parameters.

  18. The architecture modeling of LAMOST Observatory control system

    Science.gov (United States)

    Wang, Jian; Jin, Ge; Huang, Kun; Li, Feng; Ren, Jian; Yu, Xiao-Qi

    2005-06-01

    For the complexity of the LAMOST, long time development for the LAMOST and long life-cycle of the OCS system, the OCS must have a flexible, extensible, maintainable software system. It is required that the OCS has a flexible and extensible architecture. In this paper the concepts of architecture and the OCS are introduced. Referring many kinds of architecture pattern and based on the OCS physical models, the architecture of the OCS is established which is a component-based layered system using many patterns such as the MVC and proxy. The static model and dynamic model of architecture are discussed and realized at the phase of 1 level OCS.

  19. Systems approaches to study root architecture dynamics

    Directory of Open Access Journals (Sweden)

    Candela eCuesta

    2013-12-01

    Full Text Available The plant root system is essential for providing anchorage to the soil, supplying minerals and water, and synthesizing metabolites. It is a dynamic organ modulated by external cues such as environmental signals, water and nutrients availability, salinity and others. Lateral roots are initiated from the primary root post-embryonically, after which they progress through discrete developmental stages which can be independently controlled, providing a high level of plasticity during root system formation.Within this review, main contributions are presented, from the classical forward genetic screens to the more recent high-throughput approaches, combined with computer model predictions, dissecting how lateral roots and thereby root system architecture is established and developed.

  20. Mapping a classification system to architectural education

    DEFF Research Database (Denmark)

    Hermund, Anders; Klint, Lars; Rostrup, Nicolai

    2015-01-01

    a questionnaire survey among 88 students in graduate school. Qualitative interviews with a handful of practicing architects, to be able to cross check the relevance of the education with the profession. The examination indicates the need of a new definition, in addition to the CCS’s scale, covering the earliest......This paper examines to what extent a new classification system, Cuneco Classification System, CCS, proves useful in the education of architects, and to what degree the aim of an architectural education, rather based on an arts and crafts approach than a polytechnic approach, benefits from...... the distinct terminology of the classification system. The method used to examine the relationship between education, practice and the CCS bifurcates in a quantitative and a qualitative exploration: Quantitative comparison of the curriculum with the students’ own descriptions of their studies through...

  1. A Highly Secure Mobile Agent System Architecture

    Science.gov (United States)

    Okataku, Yasukuni; Okutomi, Hidetoshi; Yoshioka, Nobukazu; Ohgishi, Nobuyuki; Honiden, Shinichi

    We propose a system architecture for mobile agents to improve their security in the environments of insecure networks and non-sophisticated terminals such as PDAs. As mobile agents freely migrate onto their favorite terminals through insecure networks or terminals, it is not appropriate for them to store some secret information for authentication and encryption/decryption. We introduce one and more secure nodes(OASIS NODE) for securely generating and verifying authentication codes. The each agent’s data are encrypted by a pseudo-chaos cipher mechanism which doesn’t need any floating processing co-processor. We’ve constructed a prototype system on a Java mobile agent framework, “Bee-gent" which implements the proposed authentication and cipher mechanisms, and evaluated their performances and their applicability to business fields such as an auction system by mobile agents.

  2. System Architecture of a Mixed Reality Framework

    Directory of Open Access Journals (Sweden)

    Patrick Dähne

    2007-05-01

    Full Text Available In this paper the software architecture of a framework which simplifies the development of applications in the area of Virtual and Augmented Reality is presented. It is based on VRML/X3D to enable rendering of audio-visual information. We extended our VRML rendering system by a device management system that is based on the concept of a data-flow graph. The aim of the system is to create Mixed Reality (MR applications simply by plugging together small prefabricated software components, instead of compiling monolithic C++ applications. The flexibility and the advantages of the presented framework are explained on the basis of an exemplary implementation of a classic Augmented Realityapplication and its extension to a collaborative remote expert scenario.

  3. Control Architecture for Future Power Systems

    DEFF Research Database (Denmark)

    Heussen, Kai

    This project looks at control of future electric power grids with a high proportion of wind power and a large number of decentralized power generation, consumption and storage units participating to form a reliable supply of electrical energy. The first objective is developing a method...... for assessment of control architecture of electric power systems with a means-ends perspective. Given this purpose-oriented understanding of a power system, the increasingly stochastic nature of this problem shall be addressed and approaches for robust, distributed control will be proposed and analyzed....... The introduction of close-to-real-time markets is envisioned to enable fast distributed resource allocation while guaranteeing system stability. Electric vehicles will be studied as a means of distributed reversible energy storage and a flexible power electronic interface, with application to the case...

  4. Understanding the Lunar System Architecture Design Space

    Science.gov (United States)

    Arney, Dale C.; Wilhite, Alan W.; Reeves, David M.

    2013-01-01

    Based on the flexible path strategy and the desire of the international community, the lunar surface remains a destination for future human exploration. This paper explores options within the lunar system architecture design space, identifying performance requirements placed on the propulsive system that performs Earth departure within that architecture based on existing and/or near-term capabilities. The lander crew module and ascent stage propellant mass fraction are primary drivers for feasibility in multiple lander configurations. As the aggregation location moves further out of the lunar gravity well, the lunar lander is required to perform larger burns, increasing the sensitivity to these two factors. Adding an orbit transfer stage to a two-stage lunar lander and using a large storable stage for braking with a one-stage lunar lander enable higher aggregation locations than Low Lunar Orbit. Finally, while using larger vehicles enables a larger feasible design space, there are still feasible scenarios that use three launches of smaller vehicles.

  5. Architecture of WEST plasma control system

    Energy Technology Data Exchange (ETDEWEB)

    Ravenel, N., E-mail: nathalie.ravenel@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Nouailletas, R.; Barana, O.; Brémond, S.; Moreau, P.; Guillerminet, B.; Balme, S.; Allegretti, L. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Mannori, S. [ENEA C.R. Brasimone (Italy)

    2014-05-15

    To operate advanced plasma scenario (long pulse with high stored energy) in present and future tokamak devices under safe operation conditions, the control requirements of the plasma control system (PCS) leads to the development of advanced feedback control and real time handling exceptions. To develop these controllers and these exceptions handling strategies, a project aiming at setting up a flight simulator has started at CEA in 2009. Now, the new WEST (W Environment in Steady-state Tokamak) project deals with modifying Tore Supra into an ITER-like divertor tokamak. This upgrade impacts a lot of systems including Tore Supra PCS and is the opportunity to improve the current PCS architecture to implement the previous works and to fulfill the needs of modern tokamak operation. This paper is dealing with the description of the architecture of WEST PCS. Firstly, the requirements will be presented including the needs of new concepts (segments configuration, alternative (or backup) scenario, …). Then, the conceptual design of the PCS will be described including the main components and their functions. The third part will be dedicated to the proposal RT framework and to the technologies that we have to implement to reach the requirements.

  6. Understanding the Value of Enterprise Architecture for Organizations: A Grounded Theory Approach

    Science.gov (United States)

    Nassiff, Edwin

    2012-01-01

    There is a high rate of information system implementation failures attributed to the lack of alignment between business and information technology strategy. Although enterprise architecture (EA) is a means to correct alignment problems and executives highly rate the importance of EA, it is still not used in most organizations today. Current…

  7. Understanding the Value of Enterprise Architecture for Organizations: A Grounded Theory Approach

    Science.gov (United States)

    Nassiff, Edwin

    2012-01-01

    There is a high rate of information system implementation failures attributed to the lack of alignment between business and information technology strategy. Although enterprise architecture (EA) is a means to correct alignment problems and executives highly rate the importance of EA, it is still not used in most organizations today. Current…

  8. Open Architecture Standard for NASA's Software-Defined Space Telecommunications Radio Systems

    Science.gov (United States)

    Reinhart, Richard C.; Johnson, Sandra K.; Kacpura, Thomas J.; Hall, Charles S.; Smith, Carl R.; Liebetreu, John

    2008-01-01

    NASA is developing an architecture standard for software-defined radios used in space- and ground-based platforms to enable commonality among radio developments to enhance capability and services while reducing mission and programmatic risk. Transceivers (or transponders) with functionality primarily defined in software (e.g., firmware) have the ability to change their functional behavior through software alone. This radio architecture standard offers value by employing common waveform software interfaces, method of instantiation, operation, and testing among different compliant hardware and software products. These common interfaces within the architecture abstract application software from the underlying hardware to enable technology insertion independently at either the software or hardware layer. This paper presents the initial Space Telecommunications Radio System (STRS) Architecture for NASA missions to provide the desired software abstraction and flexibility while minimizing the resources necessary to support the architecture.

  9. Open System of Agile Ground Stations Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is an opportunity to build the HETE-2/TESS network of ground stations into an innovative and powerful Open System of Agile Stations, by developing a low-cost...

  10. VENTILATION SYSTEM WITH GROUND HEAT EXCHANGER

    Directory of Open Access Journals (Sweden)

    Vyacheslav Pisarev

    2016-11-01

    Full Text Available Ventilation systems consume more and more energy because of the often complex treatment of the air supplied to closed spaces. Looking for sources of energy allow for significant savings costs, which often translate into renewable energy sources. One of the more popular solutions is to use energy from the ground by various methods. Known and relatively common solutions are based on ground heat exchanger and ground collector cooperating with a heat pump. The paper presents the possibility of cooperation ventilation system with ground air heat exchanger and heat pump both in summer and winter period. A number solutions of this type of system, supported by calculation examples and moist air transformation in the Moliere chart have been presented. Support ventilation system with renewable energy sources allows significant savings in operating as shown in the article.

  11. Developing a System Architecture for Holonic Shop Floor Control

    DEFF Research Database (Denmark)

    Sørensen, Christian; Langer, Gilad; Alting, Leo

    1998-01-01

    This paper describes the results of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular its corresponding reference architecture serves as the basis for the development of a system-architecture for shop floor control systems in a multi-cellular c......This paper describes the results of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular its corresponding reference architecture serves as the basis for the development of a system-architecture for shop floor control systems in a multi...

  12. Web-Altairis: An Internet-Enabled Ground System

    Science.gov (United States)

    Miller, Phil; Coleman, Jason; Gemoets, Darren; Hughes, Kevin

    2000-01-01

    This paper describes Web-Altairis, an Internet-enabled ground system software package funded by the Advanced Automation and Architectures Branch (Code 588) of NASA's Goddard Space Flight Center. Web-Altairis supports the trend towards "lights out" ground systems, where the control center is unattended and problems are resolved by remote operators. This client/server software runs on most popular platforms and provides for remote data visualization using the rich functionality of the VisAGE toolkit. Web-Altairis also supports satellite commanding over the Internet. This paper describes the structure of Web-Altairis and VisAGE, the underlying technologies, the provisions for security, and our experiences in developing and testing the software.

  13. GROUND PENETRATING RADAR INVESTIGATIONS FOR ARCHITECTURAL HERITAGE PRESERVATION OF THE HABIB SAKAKINI PALACE, CAIRO, EGYPT

    Directory of Open Access Journals (Sweden)

    Sayed HEMEDA

    2012-09-01

    Full Text Available The modern architectural heritage of Egypt is both varied and vast. It covers all nonecclesiastical buildings, important monumental structures (mansions, municipal buildings in the history of architecture, as well as more common buildings. They include houses (from mansions to simple dwellings, public buildings (schools, administrative buildings, hospitals, industrial buildings (factories, warehouses, mills, bridges, monastic dependencies (drinking foundations, gardens and any other modern structures that fall within the category of monuments and comprise the Egyptian cultural heritage. We present herein a comprehensive Ground Penetration Radar (GPR investigation and hazard assessment for the rehabilitation and strengthening of Habib Sakakini’s Palace, in Cairo, considered one of the most significant architectural heritage sites in Egypt. The palace is located on an ancient water pond at the eastern side of the Egyptian gulf, beside the Sultan Bebris Al-Bondoqdary mosque, a place also called “Prince Qraja al-Turkumany pond”. That pond was drained by Habib Sakakini in 1892, to construct his famous palace in 1897. Eight hundred meters of Ground Penetration Radar (GPR profiling were conducted, to monitor the subsurface conditions. 600 meters were made in the surrounding area of the Palace and 200 m at the basement. The aim was to monitor the soil conditions beneath and around the Palace and to identify potential geological discontinuities, or the presence of faults and cavities. A suitable single and dual antenna were used (500-100 MHZ to penetrate to the desired depth of 7 meters (ASTM D6432. The GPR was also used to detect the underground water. At the building basement the GPR was used to identify the foundation thickness and the soil - basement interface, as well as for the inspection of cracks in some supporting columns, piers and masonry walls. All the results, together with the seismic hazard analysis, will be used for a complete

  14. System architecture for the Canadian interim mobile satellite system

    Science.gov (United States)

    Shariatmadar, M.; Gordon, K.; Skerry, B.; Eldamhougy, H.; Bossler, D.

    1988-05-01

    The system architecture for the Canadian Interim Mobile Satellite Service (IMSS) which is planned for commencement of commercial service in late 1989 is reviewed. The results of an associated field trial program which was carried out to determine the limits of coverage and the preliminary performance characteristics of the system are discussed.

  15. L-Band Digital Aeronautical Communications System Engineering - Concepts of Use, Systems Performance, Requirements, and Architectures

    Science.gov (United States)

    Zelkin, Natalie; Henriksen, Stephen

    2010-01-01

    This NASA Contractor Report summarizes and documents the work performed to develop concepts of use (ConUse) and high-level system requirements and architecture for the proposed L-band (960 to 1164 MHz) terrestrial en route communications system. This work was completed as a follow-on to the technology assessment conducted by NASA Glenn Research Center and ITT for the Future Communications Study (FCS). ITT assessed air-to-ground (A/G) communications concepts of use and operations presented in relevant NAS-level, international, and NAS-system-level documents to derive the appropriate ConUse relevant to potential A/G communications applications and services for domestic continental airspace. ITT also leveraged prior concepts of use developed during the earlier phases of the FCS. A middle-out functional architecture was adopted by merging the functional system requirements identified in the bottom-up assessment of existing requirements with those derived as a result of the top-down analysis of ConUse and higher level functional requirements. Initial end-to-end system performance requirements were derived to define system capabilities based on the functional requirements and on NAS-SR-1000 and the Operational Performance Assessment conducted as part of the COCR. A high-level notional architecture of the L-DACS supporting A/G communication was derived from the functional architecture and requirements.

  16. A Hybrid Architecture for Web-based Expert Systems

    OpenAIRE

    Neil Dunstan

    2012-01-01

    A recent technique is to represent the knowledge base of an expert system in XML format. XML parsers are then used to convert XML data into expert system language code. The code is executed or interpreted when providing responses to user queries. Web-based expert system (WBES) architectures may be characterized according to where the application knowledge base resides. Applications of both client and server-sided WBES architectures appear in the literature. A hybrid architecture is proposed w...

  17. Hierarchical Architecture for Enterprise Information System under Dynamic Environment

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In a dynamic environment, it is vital for enterpris e to have flexible information system architecture to integrate ERP, Supply Chain Management (SCM) and E-Commerce (EC). The traditional systems are established o n the ERP-centered flat architecture. This architecture has some disadvantages in supporting the dynamics of enterprises. Firstly, ERP is already a very expens ive and complex system; the extension based on it can only increase the complexi ty and make the implementation more expensive and risk...

  18. SOFTWARE ARCHITECTURE FOR FIJI NATIONAL UNIVERSITY CAMPUS INFORMATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Bimal Aklesh Kumar

    2011-04-01

    Full Text Available Software Architecture defines the overview of the system which consists of various components and their relationships among the software. Architectural design is very important in the development of large scale software solution and plays a very active role in achieving business goals, quality and reusable solution. It is often difficult to choose the best software architecture for your system from the several candidate types available. In this paper we look at the several architectural types and compare them based on the key requirements of our system, and select the most appropriate architecture for the implementation of campus information systems at Fiji National University. Finally we provide details of proposed architecture and outline future plans for implementation of our system.

  19. Software Architecture for Fiji National University Campus Information Systems

    CERN Document Server

    Kumar, Bimal Aklesh

    2011-01-01

    Software Architecture defines the overview of the system which consists of various components and their relationships among the software. Architectural design is very important in the development of large scale software solution and plays a very active role in achieving business goals, quality and reusable solution. It is often difficult to choose the best software architecture for your system from the several candidate types available. In this paper we look at the several architectural types and compare them based on the key requirements of our system, and select the most appropriate architecture for the implementation of campus information systems at Fiji National University. Finally we provide details of proposed architecture and outline future plans for implementation of our system.

  20. Hybridization of Architectural Styles for Integrated Enterprise Information Systems

    Science.gov (United States)

    Bagusyte, Lina; Lupeikiene, Audrone

    Current enterprise systems engineering theory does not provide adequate support for the development of information systems on demand. To say more precisely, it is forming. This chapter proposes the main architectural decisions that underlie the design of integrated enterprise information systems. This chapter argues for the extending service-oriented architecture - for merging it with component-based paradigm at the design stage and using connectors of different architectural styles. The suitability of general-purpose language SysML for the modeling of integrated enterprise information systems architectures is described and arguments pros are presented.

  1. Key Features of the Deployed NPP/NPOESS Ground System

    Science.gov (United States)

    Heckmann, G.; Grant, K. D.; Mulligan, J. E.

    2010-12-01

    The National Oceanic & Atmospheric Administration (NOAA), Department of Defense (DoD), and National Aeronautics & Space Administration (NASA) are jointly acquiring the next-generation weather/environmental satellite system; the National Polar-orbiting Operational Environmental Satellite System (NPOESS). NPOESS replaces the current NOAA Polar-orbiting Operational Environmental Satellites (POES) and DoD Defense Meteorological Satellite Program (DMSP). NPOESS satellites carry sensors to collect meteorological, oceanographic, climatological, and solar-geophysical data of the earth, atmosphere, and space. The ground data processing segment is the Interface Data Processing Segment (IDPS), developed by Raytheon Intelligence & Information Systems (IIS). The IDPS processes NPOESS Preparatory Project (NPP)/NPOESS satellite data to provide environmental data products/records (EDRs) to NOAA and DoD processing centers operated by the US government. The IDPS will process EDRs beginning with NPP and continuing through the lifetime of the NPOESS system. The command & telemetry segment is the Command, Control & Communications Segment (C3S), also developed by Raytheon IIS. C3S is responsible for managing the overall NPP/NPOESS missions from control & status of the space and ground assets to ensuring delivery of timely, high quality data from the Space Segment to IDPS for processing. In addition, the C3S provides the globally-distributed ground assets needed to collect and transport mission, telemetry, and command data between the satellites and processing locations. The C3S provides all functions required for day-to-day satellite commanding & state-of-health monitoring, and delivery of Stored Mission Data to each Central IDP for data products development and transfer to system subscribers. The C3S also monitors and reports system-wide health & status and data communications with external systems and between the segments. The C3S & IDPS segments were delivered & transitioned to

  2. A CDMA Spotbeam Architecture for the Next Generation Satellite System (NGSS) for the Aeronautical Telecommunications Network (ATN)

    Science.gov (United States)

    Raghavan, Rajesh S.; Shamma, Mohammed A.

    2003-01-01

    This paper will present work being done to model and simulate a CDMA based Mobile Satellite System architecture for providing all or part of the future Air Traffic Management (ATM) services. Such a system, will help in relieving the dependence on ground based networks, if not eliminate it. Additionally such an architecture can be used in parallel or as a supplementary service along with ground based links to help alleviate any capacity bottlenecks, or in areas where such services are difficult to make available such as in oceanic, remote areas outside the jet highways, or in developing countries where ground services are less available.

  3. Information System Architectures: Representation, Planning and Evaluation

    Directory of Open Access Journals (Sweden)

    André Vasconcelos

    2003-12-01

    Full Text Available In recent years organizations have been faced with increasingly demanding business environments - pushed by factors like market globalization, need for product and service innovation and product life cycle reduction - and with new information technologies changes and opportunities- such as the Component-off-the-shelf paradigm, the telecommunications improvement or the Enterprise Systems off-the-shelf modules availability - all of which impose a continuous redraw and reorganization of business strategies and processes. Nowadays, Information Technology makes possible high-speed, efficient and low cost access to the enterprise information, providing the means for business processes automation and improvement. In spite of these important technological progresses, information systems that support business, do not usually answer efficiently enough to the continuous demands that organizations are faced with, causing non-alignment between business and information technologies (IT and therefore reducing organization competitive abilities. This article discusses the vital role that the definition of an Information System Architecture (ISA has in the development of Enterprise Information Systems that are capable of staying fully aligned with organization strategy and business needs. In this article the authors propose a restricted collection of founding and basis operations, which will provide the conceptual paradigm and tools for proper ISA handling. These tools are then used in order to represent, plan and evaluate an ISA of a Financial Group.

  4. Ground states of linearly coupled Schrodinger systems

    Directory of Open Access Journals (Sweden)

    Haidong Liu

    2017-01-01

    Full Text Available This article concerns the standing waves of a linearly coupled Schrodinger system which arises from nonlinear optics and condensed matter physics. The coefficients of the system are spatially dependent and have a mixed behavior: they are periodic in some directions and tend to positive constants in other directions. Under suitable assumptions, we prove that the system has a positive ground state. In addition, when the L-infinity-norm of the coupling coefficient tends to zero, the asymptotic behavior of the ground states is also obtained.

  5. Research of IDSS Architecture Based on Hybrid Systems

    Institute of Scientific and Technical Information of China (English)

    MA Biao; YANG Bao-an

    2005-01-01

    This paper discusses the necessity of building IDSS on hybrid systems, and adopts XML technology to manage isomeric knowledge in hybrid systems. The paper proposes a new architecture of hybrid systems based IDSS whose core system is isomeric knowledge system. The architecture is composed of knowledge component, problems processing system, data component and intelligent user interface. This new architecture aims to enhance the capability of integrating hybrid systems, to improve the supporting effectiveness of decision-making and the intelligent level of IDSS, and tries a new way to elevate the system's ability of handling and learning knowledge.

  6. Computational architecture for image processing on a small unmanned ground vehicle

    Science.gov (United States)

    Ho, Sean; Nguyen, Hung

    2010-08-01

    Man-portable Unmanned Ground Vehicles (UGVs) have been fielded on the battlefield with limited computing power. This limitation constrains their use primarily to teleoperation control mode for clearing areas and bomb defusing. In order to extend their capability to include the reconnaissance and surveillance missions of dismounted soldiers, a separate processing payload is desired. This paper presents a processing architecture and the design details on the payload module that enables the PackBot to perform sophisticated, real-time image processing algorithms using data collected from its onboard imaging sensors including LADAR, IMU, visible, IR, stereo, and the Ladybug spherical cameras. The entire payload is constructed from currently available Commercial off-the-shelf (COTS) components including an Intel multi-core CPU and a Nvidia GPU. The result of this work enables a small UGV to perform computationally expensive image processing tasks that once were only feasible on a large workstation.

  7. Software architecture of INO340 telescope control system

    Science.gov (United States)

    Ravanmehr, Reza; Khosroshahi, Habib

    2016-08-01

    The software architecture plays an important role in distributed control system of astronomical projects because many subsystems and components must work together in a consistent and reliable way. We have utilized a customized architecture design approach based on "4+1 view model" in order to design INOCS software architecture. In this paper, after reviewing the top level INOCS architecture, we present the software architecture model of INOCS inspired by "4+1 model", for this purpose we provide logical, process, development, physical, and scenario views of our architecture using different UML diagrams and other illustrative visual charts. Each view presents INOCS software architecture from a different perspective. We finish the paper by science data operation of INO340 and the concluding remarks.

  8. 40 CFR 265.91 - Ground-water monitoring system.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Ground-water monitoring system. 265.91... DISPOSAL FACILITIES Ground-Water Monitoring § 265.91 Ground-water monitoring system. (a) A ground-water monitoring system must be capable of yielding ground-water samples for analysis and must consist of: (1...

  9. Applying Modeling Tools to Ground System Procedures

    Science.gov (United States)

    Di Pasquale, Peter

    2012-01-01

    As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

  10. System deployment optimization in architecture design

    Institute of Scientific and Technical Information of China (English)

    Xiaoxue Zhang; Shu Tang; Aimin Luo; Xueshan Luo

    2014-01-01

    Optimization of architecture design has recently drawn research interest. System deployment optimization (SDO) refers to the process of optimizing systems that are being deployed to activi-ties. This paper first formulates a mathematical model to theorize and operationalize the SDO problem and then identifies optimal so-lutions to solve the SDO problem. In the solutions, the success rate of the combat task is maximized, whereas the execution time of the task and the cost of changes in the system structure are mini-mized. The presented optimized algorithm generates an optimal solution without the need to check the entire search space. A novel method is final y proposed based on the combination of heuristic method and genetic algorithm (HGA), as wel as the combination of heuristic method and particle swarm optimization (HPSO). Experi-ment results show that the HPSO method generates solutions faster than particle swarm optimization (PSO) and genetic algo-rithm (GA) in terms of execution time and performs more efficiently than the heuristic method in terms of determining the best solution.

  11. Architectural Analysis of Complex Evolving Systems of Systems

    Science.gov (United States)

    Lindvall, Mikael; Stratton, William C.; Sibol, Deane E.; Ray, Arnab; Ackemann, Chris; Yonkwa, Lyly; Ganesan, Dharma

    2009-01-01

    The goal of this collaborative project between FC-MD, APL, and GSFC and supported by NASA IV&V Software Assurance Research Program (SARP), was to develop a tool, Dynamic SAVE, or Dyn-SAVE for short, for analyzing architectures of systems of systems. The project team was comprised of the principal investigator (PI) from FC-MD and four other FC-MD scientists (part time) and several FC-MD students (full time), as well as, two APL software architects (part time), and one NASA POC (part time). The PI and FC-MD scientists together with APL architects were responsible for requirements analysis, and for applying and evaluating the Dyn-SAVE tool and method. The PI and a group of FC-MD scientists were responsible for improving the method and conducting outreach activities, while another group of FC-MD scientists were responsible for development and improvement of the tool. Oversight and reporting was conducted by the PI and NASA POC. The project team produced many results including several prototypes of the Dyn-SAVE tool and method, several case studies documenting how the tool and method was applied to APL s software systems, and several published papers in highly respected conferences and journals. Dyn-SAVE as developed and enhanced throughout this research period, is a software tool intended for software developers and architects, software integration testers, and persons who need to analyze software systems from the point of view of how it communicates with other systems. Using the tool, the user specifies the planned communication behavior of the system modeled as a sequence diagram. The user then captures and imports the actual communication behavior of the system, which is then converted and visualized as a sequence diagram by Dyn-SAVE. After mapping the planned to the actual and specifying parameter and timing constraints, Dyn-SAVE detects and highlights deviations between the planned and the actual behavior. Requirements based on the need to analyze two inter-system

  12. A Model-Based Systems Engineering Methodology for Employing Architecture In System Analysis: Developing Simulation Models Using Systems Modeling Language Products to Link Architecture and Analysis

    Science.gov (United States)

    2016-06-01

    ENGINEERING METHODOLOGY FOR EMPLOYING ARCHITECTURE IN SYSTEM ANALYSIS: DEVELOPING SIMULATION MODELS USING SYSTEMS MODELING LANGUAGE PRODUCTS TO LINK... ENGINEERING METHODOLOGY FOR EMPLOYING ARCHITECTURE IN SYSTEM ANALYSIS: DEVELOPING SIMULATION MODELS USING SYSTEMS MODELING LANGUAGE PRODUCTS TO LINK...to model-based systems engineering (MBSE) by formally defining an MBSE methodology for employing architecture in system analysis (MEASA) that presents

  13. Evolution of the JPSS Ground Project Calibration and Validation System

    Science.gov (United States)

    Chander, G.; Jain, P.

    2014-12-01

    The Joint Polar Satellite System (JPSS) is the National Oceanic and Atmospheric Administration's (NOAA) next-generation operational Earth observation Program that acquires and distributes global environmental data from multiple polar-orbiting satellites. The JPSS Program plays a critical role to NOAA's mission to understand and predict changes in weather, climate, oceans, and coasts environments, which supports the nation's economy and protects lives and property. The National Aeronautics and Space Administration (NASA) is acquiring and implementing the JPSS, comprised of flight and ground systems on behalf of NOAA. The JPSS satellites are planned to fly in afternoon orbit and will provide operational continuity of satellite-based observations and products for NOAA Polar-orbiting Operational Environmental Satellites (POES) and the Suomi National Polar-orbiting Partnership (SNPP) satellite. Government Resource for Algorithm Verification, Independent Test, and Evaluation (GRAVITE) system is a NOAA system developed and deployed by JPSS Ground Project to support Calibration and Validation (Cal/Val), Algorithm Integration, Investigation, and Tuning, and Data Quality Monitoring. It is a mature, deployed system that supports SNPP mission and has been in operations since SNPP launch. This paper discusses the major re-architecture for Block 2.0 that incorporates SNPP lessons learned, architecture of the system, and demonstrates how GRAVITE has evolved as a system with increased performance. It is a robust, reliable, maintainable, scalable, and secure system that supports development, test, and production strings, replaces proprietary and custom software, uses open source software, and is compliant with NASA and NOAA standards. "[Pending NASA Goddard Applied Engineering & Technology Directorate (AETD) Approval]"

  14. Developing A System Architecture For Holonic Shop Floor Control

    DEFF Research Database (Denmark)

    Sørensen, Christian; Langer, Gilad; Alting, Leo

    1998-01-01

    This paper describes theresults of research regarding the emerging theory of Holonic Manufacturing Systems. This theory and in particular itscorresponding reference architecture serves as the basis for thedevelopment of a system-architecture for shop floor controlsystems in a multi-cellular conte...

  15. Model-based safety architecture framework for complex systems

    NARCIS (Netherlands)

    Schuitemaker, K.; Rajabalinejad, M.; Braakhuis, J.G.; Podofilini, Luca; Sudret, Bruno; Stojadinovic, Bozidar; Zio, Enrico; Kröger, Wolfgang

    2015-01-01

    The shift to transparency and rising need of the general public for safety, together with the increasing complexity and interdisciplinarity of modern safety-critical Systems of Systems (SoS) have resulted in a Model-Based Safety Architecture Framework (MBSAF) for capturing and sharing architectural

  16. SAFARI optical system architecture and design concept

    Science.gov (United States)

    Pastor, Carmen; Jellema, Willem; Zuluaga-Ramírez, Pablo; Arrazola, David; Fernández-Rodriguez, M.; Belenguer, Tomás.; González Fernández, Luis M.; Audley, Michael D.; Evers, Jaap; Eggens, Martin; Torres Redondo, Josefina; Najarro, Francisco; Roelfsema, Peter

    2016-07-01

    SpicA FAR infrared Instrument, SAFARI, is one of the instruments planned for the SPICA mission. The SPICA mission is the next great leap forward in space-based far-infrared astronomy and will study the evolution of galaxies, stars and planetary systems. SPICA will utilize a deeply cooled 2.5m-class telescope, provided by European industry, to realize zodiacal background limited performance, and high spatial resolution. The instrument SAFARI is a cryogenic grating-based point source spectrometer working in the wavelength domain 34 to 230 μm, providing spectral resolving power from 300 to at least 2000. The instrument shall provide low and high resolution spectroscopy in four spectral bands. Low Resolution mode is the native instrument mode, while the high Resolution mode is achieved by means of a Martin-Pupplet interferometer. The optical system is all-reflective and consists of three main modules; an input optics module, followed by the Band and Mode Distributing Optics and the grating Modules. The instrument utilizes Nyquist sampled filled linear arrays of very sensitive TES detectors. The work presented in this paper describes the optical design architecture and design concept compatible with the current instrument performance and volume design drivers.

  17. The Woof and the Warp of Architecture: The Figure-Ground in Urban Design

    Directory of Open Access Journals (Sweden)

    B.D. Wortham-Galvin

    2014-08-01

    Full Text Available To borrow a metaphor used by Georg W.F. Hegel in the Philosophy of History to describe historical processes, architecture should be understood as a series of complex threads wherein one recognizes the physical forms as the warp, and the temporal, socio-political, natural, and aural contexts as the woof. Fabric is asserted as a concept broader than the immediate spatial and physical situation in which individual buildings are located; and, the threads of the fabric are all of those elements that aid in making the built environment both a designed and lived experience.In order to discuss this proposed understanding of fabric, this paper will look at how drawings informed the process and theory of urban design in the mid- to late-twentieth century. The discussion will focus on the origins of the Nolli plan and its 'rediscovery' by the Cornell School and their use of the figure-ground as a primary tool in the formulation of an urban design theory. The trajectory of the figure-ground can reinvigorate contemporary urban design praxis once more by reasserting drawing as more than mere illustration but as a means to conceptualize design methodologies that support a holistic notion of fabric.

  18. System design specification Brayton Isotope Power System (BIPS) Flight System (FS), and Ground Demonstration System (GDS)

    Energy Technology Data Exchange (ETDEWEB)

    1976-06-14

    The system design specification for ground demonstration, development, and flight qualification of a Brayton Isotope Power System (BIPS) is presented. The requirements for both a BIPS conceptual Flight System (FS) and a Ground Demonstration System (GDS) are defined.

  19. Semantic Grounding Strategies for Tagbased Recommender Systems

    CERN Document Server

    Durao, Frederico

    2011-01-01

    Recommender systems usually operate on similarities between recommended items or users. Tag based recommender systems utilize similarities on tags. The tags are however mostly free user entered phrases. Therefore, similarities computed without their semantic groundings might lead to less relevant recommendations. In this paper, we study a semantic grounding used for tag similarity calculus. We show a comprehensive analysis of semantic grounding given by 20 ontologies from different domains. The study besides other things reveals that currently available OWL ontologies are very narrow and the percentage of the similarity expansions is rather small. WordNet scores slightly better as it is broader but not much as it does not support several semantic relationships. Furthermore, the study reveals that even with such number of expansions, the recommendations change considerably.

  20. A system architecture for a planetary rover

    Science.gov (United States)

    Smith, D. B.; Matijevic, J. R.

    1989-01-01

    Each planetary mission requires a complex space vehicle which integrates several functions to accomplish the mission and science objectives. A Mars Rover is one of these vehicles, and extends the normal spacecraft functionality with two additional functions: surface mobility and sample acquisition. All functions are assembled into a hierarchical and structured format to understand the complexities of interactions between functions during different mission times. It can graphically show data flow between functions, and most importantly, the necessary control flow to avoid unambiguous results. Diagrams are presented organizing the functions into a structured, block format where each block represents a major function at the system level. As such, there are six blocks representing telecomm, power, thermal, science, mobility and sampling under a supervisory block called Data Management/Executive. Each block is a simple collection of state machines arranged into a hierarchical order very close to the NASREM model for Telerobotics. Each layer within a block represents a level of control for a set of state machines that do the three primary interface functions: command, telemetry, and fault protection. This latter function is expanded to include automatic reactions to the environment as well as internal faults. Lastly, diagrams are presented that trace the system operations involved in moving from site to site after site selection. The diagrams clearly illustrate both the data and control flows. They also illustrate inter-block data transfers and a hierarchical approach to fault protection. This systems architecture can be used to determine functional requirements, interface specifications and be used as a mechanism for grouping subsystems (i.e., collecting groups of machines, or blocks consistent with good and testable implementations).

  1. Constellation Ground Systems Launch Availability Analysis: Enhancing Highly Reliable Launch Systems Design

    Science.gov (United States)

    Gernand, Jeffrey L.; Gillespie, Amanda M.; Monaghan, Mark W.; Cummings, Nicholas H.

    2010-01-01

    Success of the Constellation Program's lunar architecture requires successfully launching two vehicles, Ares I/Orion and Ares V/Altair, in a very limited time period. The reliability and maintainability of flight vehicles and ground systems must deliver a high probability of successfully launching the second vehicle in order to avoid wasting the on-orbit asset launched by the first vehicle. The Ground Operations Project determined which ground subsystems had the potential to affect the probability of the second launch and allocated quantitative availability requirements to these subsystems. The Ground Operations Project also developed a methodology to estimate subsystem reliability, availability and maintainability to ensure that ground subsystems complied with allocated launch availability and maintainability requirements. The verification analysis developed quantitative estimates of subsystem availability based on design documentation; testing results, and other information. Where appropriate, actual performance history was used for legacy subsystems or comparative components that will support Constellation. The results of the verification analysis will be used to verify compliance with requirements and to highlight design or performance shortcomings for further decision-making. This case study will discuss the subsystem requirements allocation process, describe the ground systems methodology for completing quantitative reliability, availability and maintainability analysis, and present findings and observation based on analysis leading to the Ground Systems Preliminary Design Review milestone.

  2. Development of Hybrid Product Breakdown Structure for NASA Ground Systems

    Science.gov (United States)

    Monaghan, Mark W.; Henry, Robert J.

    2013-01-01

    The Product Breakdown Structure is traditionally a method of identification of the products of a project in a tree structure. It is a tool used to assess, plan, document, and display the equipment requirements for a project. It is part of a product based planning technique, and attempts to break down all components of a project in as much detail as possible, so that nothing is overlooked. The PBS for ground systems at the Kennedy Space Center is being developed to encompass the traditional requirements including the alignment of facility, systems, and components to the organizational hierarchy. The Ground Operations Product Breakdown Structure is a hybrid in nature in that some aspects of a work breakdown structure will be incorporated and merged with the Architecture Concept of Operations, Master Subsystem List, customer interface, and assigned management responsibility. The Ground Operations Product Breakdown Structure needs to be able to identify the flexibility of support differing customers (internal and external) usage of ground support equipment within the Kennedy Space Center launch and processing complex. The development of the Product Breakdown Structure is an iterative activity Initially documenting the organization hierarchy structure and relationships. The Product Breakdown Structure identifies the linkage between the customer program requirements, allocation of system resources, development of design goals, and identification logistics products. As the Product Breakdown Structure progresses the incorporation of the results of requirement planning for the customer occurs identifying facility needs and systems. The mature Product Breakdown Structure is baselined with a hierarchical drawing, the Product Breakdown Structure database, and an associated document identifying the verification of the data through the life cycle of the program/product line. This paper will document, demonstrate, and identify key aspects of the life cycle of a Hybrid Product

  3. Research on system architecture of modeling and simulation

    Institute of Scientific and Technical Information of China (English)

    WANG Jiangyun; WANG Xingren

    2007-01-01

    The modeling and simulation(M&S)architecture describes and defines the relationship between the difeerent parts of a simulation.The simulation system architecture and simulation support platform architecture are discussed separately.The simulation support platform architecture consists of the management layer,the resource layer,the communication layer,the application layer and the infrastructure layer.The best Wav is to design and realize the M&S collaborative environment for simulation support platform in the resource-communication-application three-dimension space.

  4. ADaPPT: Enterprise Architecture Thinking for Information Systems Development

    Directory of Open Access Journals (Sweden)

    Hanifa Shah

    2011-01-01

    Full Text Available Enterprises have architecture: whether it is visible or invisible is another matter. An enterprises' architecture determines the way in which it works to deliver its business objectives and the way in which it can change to continue to meet its evolving business objectives. Enterprise architectural thinking can facilitate effective strategic planning and information systems development. This paper reviews enterprise architecture (EA and its concepts. It briefly considers EA frameworks. It describes the ADaPPT (Aligning Data, People, Processes and Technology EA approach as a means to managing organisational complexity and change. Future research directions are discussed.

  5. SMRF architecture concepts

    NARCIS (Netherlands)

    Rossum, W.L. van; Wit, J.J.M. de; Otten, M.P.G.; Huizing, A.G.

    2011-01-01

    This presents three valuable applications of scalable multifunction RF (SMRF) systems. These systems allow radar, ESM, and communication functionality using a single front-end architecture. With the use of a novel system design tool, concepts for SMRF architectures for airborne, ground-based and nav

  6. Landsat Data Continuity Mission (LDCM) space to ground mission data architecture

    Science.gov (United States)

    Nelson, Jack L.; Ames, J.A.; Williams, J.; Patschke, R.; Mott, C.; Joseph, J.; Garon, H.; Mah, G.

    2012-01-01

    The Landsat Data Continuity Mission (LDCM) is a scientific endeavor to extend the longest continuous multi-spectral imaging record of Earth's land surface. The observatory consists of a spacecraft bus integrated with two imaging instruments; the Operational Land Imager (OLI), built by Ball Aerospace & Technologies Corporation in Boulder, Colorado, and the Thermal Infrared Sensor (TIRS), an in-house instrument built at the Goddard Space Flight Center (GSFC). Both instruments are integrated aboard a fine-pointing, fully redundant, spacecraft bus built by Orbital Sciences Corporation, Gilbert, Arizona. The mission is scheduled for launch in January 2013. This paper will describe the innovative end-to-end approach for efficiently managing high volumes of simultaneous realtime and playback of image and ancillary data from the instruments to the reception at the United States Geological Survey's (USGS) Landsat Ground Network (LGN) and International Cooperator (IC) ground stations. The core enabling capability lies within the spacecraft Command and Data Handling (C&DH) system and Radio Frequency (RF) communications system implementation. Each of these systems uniquely contribute to the efficient processing of high speed image data (up to 265Mbps) from each instrument, and provide virtually error free data delivery to the ground. Onboard methods include a combination of lossless data compression, Consultative Committee for Space Data Systems (CCSDS) data formatting, a file-based/managed Solid State Recorder (SSR), and Low Density Parity Check (LDPC) forward error correction. The 440 Mbps wideband X-Band downlink uses Class 1 CCSDS File Delivery Protocol (CFDP), and an earth coverage antenna to deliver an average of 400 scenes per day to a combination of LGN and IC ground stations. This paper will also describe the integrated capabilities and processes at the LGN ground stations for data reception using adaptive filtering, and the mission operations approach fro- the LDCM

  7. Flexible surveillance system architecture for prototyping video content analysis algorithms

    Science.gov (United States)

    Wijnhoven, R. G. J.; Jaspers, E. G. T.; de With, P. H. N.

    2006-01-01

    Many proposed video content analysis algorithms for surveillance applications are very computationally intensive, which limits the integration in a total system, running on one processing unit (e.g. PC). To build flexible prototyping systems of low cost, a distributed system with scalable processing power is therefore required. This paper discusses requirements for surveillance systems, considering two example applications. From these requirements, specifications for a prototyping architecture are derived. An implementation of the proposed architecture is presented, enabling mapping of multiple software modules onto a number of processing units (PCs). The architecture enables fast prototyping of new algorithms for complex surveillance applications without considering resource constraints.

  8. Control architecture of power systems: Modeling of purpose and function

    DEFF Research Database (Denmark)

    Heussen, Kai; Saleem, Arshad; Lind, Morten

    2009-01-01

    for semantically consistent modeling of control architecture is presented. The method, called Multilevel Flow Modeling (MFM), is applied to the case of system balancing. It was found that MFM is capable of capturing implicit control knowledge, which is otherwise difficult to formalize. The method has possible...... of power systems and it is necessary to identify requirements and functions. How does new control architecture fit with the old architecture? How can power system functions be specified independent of technology? What is the purpose of control in power systems? In this paper, a method suitable...

  9. Developing dynamic field theory architectures for embodied cognitive systems with cedar

    Directory of Open Access Journals (Sweden)

    Oliver Lomp

    2016-11-01

    Full Text Available Embodied artificial cognitive systems such as autonomous robots or intelligent observers connect cognitive processes to sensory and effector systems in real time. Prime candidates for such embodied intelligence are neurally inspired architectures. While components such as forward neural networks are well established, designing pervasively autonomous neural architectures remains a challenge. This includes the problem of tuning the parameters of such architectures so that they deliver specified functionality under variable environmental conditions and retain these functions as the architectures are expanded. The scaling and autonomy problems are solved, in part, by dynamic field theory (DFT, a theoretical framework for the neural grounding of sensorimotor and cognitive processes. In this paper, we address how to efficiently build DFT architectures that control embodied agents and how to tune their parameters so that the desired cognitive functions emerge while such agents are situated in real environments. In DFT architectures, dynamic neural fields or nodes are assigned dynamic regimes, that is, attractor states and their instabilities, from which cognitive function emerges. Tuning thus amounts to determining values of the dynamic parameters for which the components of a DFT architecture are in the specified dynamic regime under the appropriate environmental conditions. The process of tuning is facilitated by the software framework cedar, which provides a graphical interface to build and execute DFT architectures. It enables to change dynamic parameters online and visualize the activation states of any component while the agent is receiving sensory inputs in real-time. Using a simple example, we take the reader through the workflow of conceiving of DFT architectures, implementing them on embodied agents, tuning their parameters, and assessing performance while the system is coupled to real sensory inputs.

  10. Distributed operating system for NASA ground stations

    Science.gov (United States)

    Doyle, John F.

    1987-01-01

    NASA ground stations are characterized by ever changing support requirements, so application software is developed and modified on a continuing basis. A distributed operating system was designed to optimize the generation and maintenance of those applications. Unusual features include automatic program generation from detailed design graphs, on-line software modification in the testing phase, and the incorporation of a relational database within a real-time, distributed system.

  11. Distributed operating system for NASA ground stations

    Science.gov (United States)

    Doyle, John F.

    1987-01-01

    NASA ground stations are characterized by ever changing support requirements, so application software is developed and modified on a continuing basis. A distributed operating system was designed to optimize the generation and maintenance of those applications. Unusual features include automatic program generation from detailed design graphs, on-line software modification in the testing phase, and the incorporation of a relational database within a real-time, distributed system.

  12. A hierarchical architecture for an energy management system

    NARCIS (Netherlands)

    Piotrowski, Krzysztof; Casaca, Augusto; Gerards, Marco E.T.; Jongerden, Marijn; Melo, Francisco; Garrido, Daniel; Geers, Marcel; Peralta, Jacoba

    2016-01-01

    This paper introduces an innovative energy management system architecture for Smart Grids, designed in the European 7th framework program project e-balance. The architecture is hierarchical and fractal-like, which results in better scalability and reuse of algorithms and programming code for energy

  13. Designing of a risk assessment architecture to analyze potential risks from space weather to space and ground based assets

    Science.gov (United States)

    Sattar, Erum

    2016-07-01

    Today's world is more vulnerable to space weather due to ever increased advance and costly space technology deployed in space and on ground. The space weather has a natural potential of posing harmful effects on space and ground based assets and on astronaut's life. This global challenge of space weather essentially demands global and regional preparedness to develop its situational awareness, analyzing risks and devise possible mitigation procedures. Considering risk mitigation architecture as inevitable for all scientific missions, this paper focuses to develop a risk assessment architecture for the space environment and to map its utility in identifying and analyzing potential risks to space and ground based assets from space weather in the South Asia region. Different risk assessment tools will be studied and would conclude in the most effective tool or strategy that may help to develop our capability in identifying, protecting and mitigating from the devastating effects of the space weather.

  14. Can we manipulate root system architecture to control soil erosion?

    Science.gov (United States)

    Ola, A.; Dodd, I. C.; Quinton, J. N.

    2015-09-01

    Soil erosion is a major threat to soil functioning. The use of vegetation to control erosion has long been a topic for research. Much of this research has focused on the above-ground properties of plants, demonstrating the important role that canopy structure and cover plays in the reduction of water erosion processes. Less attention has been paid to plant roots. Plant roots are a crucial yet under-researched factor for reducing water erosion through their ability to alter soil properties, such as aggregate stability, hydraulic function and shear strength. However, there have been few attempts to specifically manipulate plant root system properties to reduce soil erosion. Therefore, this review aims to explore the effects that plant roots have on soil erosion and hydrological processes, and how plant root architecture might be manipulated to enhance its erosion control properties. We demonstrate the importance of root system architecture for the control of soil erosion. We also show that some plant species respond to nutrient-enriched patches by increasing lateral root proliferation. The erosional response to root proliferation will depend upon its location: at the soil surface dense mats of roots may reduce soil erodibility but block soil pores thereby limiting infiltration, enhancing runoff. Additionally, in nutrient-deprived regions, root hair development may be stimulated and larger amounts of root exudates released, thereby improving aggregate stability and decreasing erodibility. Utilizing nutrient placement at specific depths may represent a potentially new, easily implemented, management strategy on nutrient-poor agricultural land or constructed slopes to control erosion, and further research in this area is needed.

  15. Flora robotica -- An Architectural System Combining Living Natural Plants and Distributed Robots

    DEFF Research Database (Denmark)

    Hamann, Heiko; Divband Soorati, Mohammad; Heinrich, Mary Katherine

    2017-01-01

    Key to our project flora robotica is the idea of creating a bio-hybrid system of tightly coupled natural plants and distributed robots to grow architectural artifacts and spaces. Our motivation with this ground research project is to lay a principled foundation towards the design and implementation...... of living architectural systems that provide functionalities beyond those of orthodox building practice, such as self-repair, material accumulation and self-organization. Plants and robots work together to create a living organism that is inhabited by human beings. User-defined design objectives help...... to steer the directional growth of the plants, but also the system's interactions with its inhabitants determine locations where growth is prohibited or desired (e.g., partitions, windows, occupiable space). We report our plant species selection process and aspects of living architecture. A leitmotif...

  16. Safety architecture of internet based multi-robot teleoperation system

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jie; GAO Yong-sheng; CAI He-gao

    2005-01-01

    Safety subsystem is one of the important parts in robot teleoperation system. In this paper, a safety architecture of safety subsystem in Internet based multi-operator-multi-robot (MOMR) teleoperation system is presented. The subsystem is divided into three layers in its logic architecture: interactive monitor layer, collaborative control layer and real-time control layer. The safety problems and the related strategy are clarified by detailed analysis of each layer and relationship among the layers. So we can obtain a high performance MOMR teleoperation system with multi-layer safety architecture.

  17. QUality Assessment of System Architectures and their Requirements (QUASAR)

    Science.gov (United States)

    2010-05-18

    2010 Carnegie Mellon University QUality Assessment of System Architectures and their Requirements ( QUASAR ) DoD and NDIA System-of-Systems...Architectures and their Requirements ( QUASAR ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e...Prescribed by ANSI Std Z39-18 2 QUASAR Version 3.1, 1 Hour Overview Donald Firesmith, 18 May 2010 © 2010 Carnegie Mellon University Topics History

  18. Design and Analysis of Architectures for Structural Health Monitoring Systems

    Science.gov (United States)

    Mukkamala, Ravi; Sixto, S. L. (Technical Monitor)

    2002-01-01

    During the two-year project period, we have worked on several aspects of Health Usage and Monitoring Systems for structural health monitoring. In particular, we have made contributions in the following areas. 1. Reference HUMS architecture: We developed a high-level architecture for health monitoring and usage systems (HUMS). The proposed reference architecture is shown. It is compatible with the Generic Open Architecture (GOA) proposed as a standard for avionics systems. 2. HUMS kernel: One of the critical layers of HUMS reference architecture is the HUMS kernel. We developed a detailed design of a kernel to implement the high level architecture.3. Prototype implementation of HUMS kernel: We have implemented a preliminary version of the HUMS kernel on a Unix platform.We have implemented both a centralized system version and a distributed version. 4. SCRAMNet and HUMS: SCRAMNet (Shared Common Random Access Memory Network) is a system that is found to be suitable to implement HUMS. For this reason, we have conducted a simulation study to determine its stability in handling the input data rates in HUMS. 5. Architectural specification.

  19. Architectural design of a ground-based deep-space optical reception antenna

    Science.gov (United States)

    Kerr, E. L.

    1989-01-01

    An architectural design of a ground-based antenna (telescope) for receiving optical communications from deep space is presented. Physical and optical parameters, and their effect on the performance and cost considerations, are described. The channel capacity of the antenna is 100 kbits/s from Saturn and 5 Mbits/s from Mars. A novel sunshade is designed to permit optical communication even when the deep-space laser source is as close to the sun as 12 deg. Inserts in the tubes of the sunshade permit operations at solar elongations as small as 6 or 3 deg. The Nd:YAG source laser and the Fraunhofer filter (a narrow-band predetection optical filter) are tuned to match the Doppler shifts of the source and background. A typical Saturn-to-earth data link can reduce its source power requirement from 8.2 W to 2 W of laser output by employing a Fraunhofer filter instead of a conventional multilayer dielectric filter.

  20. Brain-grounded theory of temporal and spatial design in architecture and the environment

    CERN Document Server

    Ando, Yoichi

    2016-01-01

    In this book, brain-grounded theory of temporal and spatial design in architecture and the environment is discussed. The author believes that it is a key to solving such global problems as environmental disorders and severe climate change as well as conflicts that are caused by the ill-conceived notion of “time is money”. There are three phases or aspects of a person’s life: the physical life, the spiritual or mental life, and the third stage of life, when a person moves from middle age into old age and can choose what he or she wishes to do instead of simply what must be done. This book describes the temporal design of the environment based on the theory of subjective preference, which could make it possible for an individual to realize a healthy life in all three phases. In his previously published work, the present author wrote that the theory of subjective preference has been established for the sound and visual fields based on neural evidence, and that subjective preference is an overall response o...

  1. Architectural design of a ground-based deep-space optical reception antenna

    Science.gov (United States)

    Kerr, E. L.

    1989-01-01

    An architectural design of a ground-based antenna (telescope) for receiving optical communications from deep space is presented. Physical and optical parameters, and their effect on the performance and cost considerations, are described. The channel capacity of the antenna is 100 kbits/s from Saturn and 5 Mbits/s from Mars. A novel sunshade is designed to permit optical communication even when the deep-space laser source is as close to the sun as 12 deg. Inserts in the tubes of the sunshade permit operations at solar elongations as small as 6 or 3 deg. The Nd:YAG source laser and the Fraunhofer filter (a narrow-band predetection optical filter) are tuned to match the Doppler shifts of the source and background. A typical Saturn-to-earth data link can reduce its source power requirement from 8.2 W to 2 W of laser output by employing a Fraunhofer filter instead of a conventional multilayer dielectric filter.

  2. Designing an architectural style for Pervasive Healthcare systems.

    Science.gov (United States)

    Rafe, Vahid; Hajvali, Masoumeh

    2013-04-01

    Nowadays, the Pervasive Healthcare (PH) systems are considered as an important research area. These systems have a dynamic structure and configuration. Therefore, an appropriate method for designing such systems is necessary. The Publish/Subscribe Architecture (pub/sub) is one of the convenient architectures to support such systems. PH systems are safety critical; hence, errors can bring disastrous results. To prevent such problems, a powerful analytical tool is required. So using a proper formal language like graph transformation systems for developing of these systems seems necessary. But even if software engineers use such high level methodologies, errors may occur in the system under design. Hence, it should be investigated automatically and formally that whether this model of system satisfies all their requirements or not. In this paper, a dynamic architectural style for developing PH systems is presented. Then, the behavior of these systems is modeled and evaluated using GROOVE toolset. The results of the analysis show its high reliability.

  3. The system architecture of the Pocket Companion

    NARCIS (Netherlands)

    Havinga, Paul J.M.; Smit, Gerard J.M.

    1997-01-01

    In the Moby Dick project we design the architecture of a so-called Pocket Companion. It is a small personal portable computer with wireless communication facilities for every day use. The typical use of the Pocket Companion induces a number of requirements concerning security, performance, energy co

  4. Complex Modelling of Open System Design for Sustainable Architecture

    Science.gov (United States)

    Gu, Yan; Frazer, John

    This paper argues a model of complex system design for sustainable architecture within a framework of entropy evolution. The spectrum of sustainable architecture consists of the efficient use of energy and material resource in life-cycle of buildings, the active involvement of the occupants in micro-climate control within buildings, and the natural environmental context. The interactions of the parameters compose a complex system of sustainable architectural design, of which the conventional linear and fragmented design technologies are insufficient to indicate holistic and ongoing environmental performance. The complexity theory of dissipative structure states a microscopic formulation of open system evolution, which provides a system design framework for the evolution of building environmental performance towards an optimization of sustainability in architecture.

  5. Modular Architecture for the Deep Space Habitat Instrumentation System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project is focused on developing a continually evolving modular backbone architecture for the Deep Space Habitat (DSH) instrumentation system by integrating new...

  6. Joint Polar Satellite System (JPSS) Common Ground System (CGS) Current Technical Performance Measures

    Science.gov (United States)

    Cochran, S.; Panas, M.; Jamilkowski, M. L.; Miller, S. W.

    2015-12-01

    ABSTRACT The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture is being upgraded to Block 2.0 in 2015 to "operationalize" S-NPP, leverage lessons learned to date in multi-mission support, take advantage of more reliable and efficient technologies, and satisfy new requirements and constraints in the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 49 Technical Performance Measures (TPMs) across 10 categories, such as data latency, operational availability and scalability. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 10 TPM categories listed above. We will provide updates on how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

  7. Updates to the NASA Space Telecommunications Radio System (STRS) Architecture

    Science.gov (United States)

    Kacpura, Thomas J.; Handler, Louis M.; Briones, Janette; Hall, Charles S.

    2008-01-01

    This paper describes an update of the Space Telecommunications Radio System (STRS) open architecture for NASA space based radios. The STRS architecture has been defined as a framework for the design, development, operation and upgrade of space based software defined radios, where processing resources are constrained. The architecture has been updated based upon reviews by NASA missions, radio providers, and component vendors. The STRS Standard prescribes the architectural relationship between the software elements used in software execution and defines the Application Programmer Interface (API) between the operating environment and the waveform application. Modeling tools have been adopted to present the architecture. The paper will present a description of the updated API, configuration files, and constraints. Minimum compliance is discussed for early implementations. The paper then closes with a summary of the changes made and discussion of the relevant alignment with the Object Management Group (OMG) SWRadio specification, and enhancements to the specialized signal processing abstraction.

  8. ARCHITECTURE SOFTWARE SOLUTION TO SUPPORT AND DOCUMENT MANAGEMENT QUALITY SYSTEM

    Directory of Open Access Journals (Sweden)

    Milan Eric

    2010-12-01

    Full Text Available One of the basis of a series of standards JUS ISO 9000 is quality system documentation. An architecture of the quality system documentation depends on the complexity of business system. An establishment of an efficient management documentation of system of quality is of a great importance for the business system, as well as in the phase of introducing the quality system and in further stages of its improvement. The study describes the architecture and capability of software solutions to support and manage the quality system documentation in accordance with the requirements of standards ISO 9001:2001, ISO 14001:2005 HACCP etc.

  9. Integrated Software Architecture-Based Reliability Prediction for IT Systems

    OpenAIRE

    Brosch, Franz

    2012-01-01

    With the increasing importance of reliability in business and industrial IT systems, new techniques for architecture-based software reliability prediction are becoming an integral part of the development process. This dissertation thesis introduces a novel reliability modelling and prediction technique that considers the software architecture with its component structure, control and data flow, recovery mechanisms, its deployment to distributed hardware resources and the system´s usage p...

  10. A Multifaceted Approach to Modernizing NASA's Advanced Multi-Mission Operations System (AMMOS) System Architecture

    Science.gov (United States)

    Estefan, Jeff A.; Giovannoni, Brian J.

    2014-01-01

    The Advanced Multi-Mission Operations Systems (AMMOS) is NASA's premier space mission operations product line offering for use in deep-space robotic and astrophysics missions. The general approach to AMMOS modernization over the course of its 29-year history exemplifies a continual, evolutionary approach with periods of sponsor investment peaks and valleys in between. Today, the Multimission Ground Systems and Services (MGSS) office-the program office that manages the AMMOS for NASA-actively pursues modernization initiatives and continues to evolve the AMMOS by incorporating enhanced capabilities and newer technologies into its end-user tool and service offerings. Despite the myriad of modernization investments that have been made over the evolutionary course of the AMMOS, pain points remain. These pain points, based on interviews with numerous flight project mission operations personnel, can be classified principally into two major categories: 1) information-related issues, and 2) process-related issues. By information-related issues, we mean pain points associated with the management and flow of MOS data across the various system interfaces. By process-related issues, we mean pain points associated with the MOS activities performed by mission operators (i.e., humans) and supporting software infrastructure used in support of those activities. In this paper, three foundational concepts-Timeline, Closed Loop Control, and Separation of Concerns-collectively form the basis for expressing a set of core architectural tenets that provides a multifaceted approach to AMMOS system architecture modernization intended to address the information- and process-related issues. Each of these architectural tenets will be further explored in this paper. Ultimately, we envision the application of these core tenets resulting in a unified vision of a future-state architecture for the AMMOS-one that is intended to result in a highly adaptable, highly efficient, and highly cost

  11. The NASA (National Aeronautics and Space Administration) Laboratory Telerobotic Manipulator control system architecture

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, J.C.; Butler, P.L.; Glassell, R.L.; Herndon, J.N.

    1991-01-01

    In support of the National Aeronautics and Space Administration (NASA) goals to increase the utilization of dexterous robotic systems in space, the Oak Ridge National Laboratory (ORNL) has developed the Laboratory Telerobotic Manipulator (LTM) system. It is a dexterous, dual-arm, force reflecting teleoperator system with robotic features for NASA ground-based research. This paper describes the overall control system architecture, including both the hardware and software. The control system is a distributed, modular, and hierarchical design with flexible expansion capabilities for future enhancements of both the hardware and software. 6 refs., 4 figs.

  12. Study on Network Security Architecture for Power Systems

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The wide application of network technology in power systems brings not only convenience and flexibility but also security threats. An architecture of network security for power system was proposed in this study,which protected data and facilities from being attacked by outside users by means of firewall, security monitor and control system. Firewall was basically the first line of defense for the intranet; the security monitoring system was a kind of IDS (Intrusion Detection System), while security control system provided authentication, authorization,data-encrypted transmission and security management. This architecture provides various security services, such as identification, authentication, authorization, data integrity and confidentiality.

  13. Architecture Research of Non-Stop Computer System

    Institute of Scientific and Technical Information of China (English)

    LIUXinsong; QIUYuanjie; YANGFeng; YANGongjun; GUPan; GAOKe

    2004-01-01

    Distributed & parallel server system with distributed & parallel I/O interface has solved the bottleneck between server system and client system, and also has solved the rebuilding problem after system fault. However, the system still has some shortcomings: the switch is the system bottleneck and the system is not adapted to WAN (Wide area network). Therefore, we put forward a new system architecture to overcome these shortcomings and develop the non-stop computer system. The basis of a non-stop system is rebuilt after system fault. The inner architecture of non-stop system must be redundant and the redundancy is the system fault-tolerance redundancy based on distributed mechanism and not backupredundancy. Analysis and test results declare that the system rebuild time after fault is in second scale and its rebuild capability is so strong that the system can be nonstop in the system's lifetime.

  14. 46 CFR 111.05-31 - Grounding conductors for systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Grounding conductors for systems. 111.05-31 Section 111... Grounding conductors for systems. (a) A conductor for grounding a direct-current system must be the larger of: (1) The largest conductor supplying the system; or (2) No. 8 AWG (8.4mm2). (b) A conductor...

  15. Designing a Multi Agent System Architecture for IT Governance Platform

    Directory of Open Access Journals (Sweden)

    S. ELHASNAOUI

    2014-06-01

    Full Text Available This paper presents a multi-agents architecture which facilitates the integration of three major IT governance frameworks: COBIT5, ITIL V3 and ISO/IEC27002, to optimize the construction of a distributed system. This architecture proposes a new and easier method to develop a distributed multi agents system, where agents involved in this system can communicate in a distributed way thanks to functionalities offered by the system. It gives finally an overview of implementation of a prototype of the proposed solution limited for the moment to integration of processes most used in the majority of information systems.

  16. Architecture Optimization of More Electric Aircraft Actuation System

    Institute of Scientific and Technical Information of China (English)

    QI Haitao; FU Yongling; QI Xiaoye; LANG Yan

    2011-01-01

    The optional types of power source and actuator in the aircraft are more and more diverse due to fast development in more electric technology,which makes the combinations of different power sources and actuators become extremely complex in the architecture optimization process of airborne actuation system.The traditional “trial and error” method cannot satisfy the design demands.In this paper,firstly,the composition of more electric aircraft(MEA) flight control actuation system(FCAS) is introduced,and the possible architecture quantity is calculated.Secondly,the evaluation criteria of FCAS architecture with respect to safe reliability,weight and efficiency are proposed,and the evaluation criteria values are calculated in the case that each control surface adopts the same actuator configuration.Finally,the optimization results of MEA FCAS architecture are obtained by applying genetic algorithm(GA).Compared to the traditional actuation system architecture,which only adopts servo valve controlled hydraulic actuators,the weight of the optimized more electric actuation system architecture can be reduced by 6%,and the efficiency can be improved by 30% based on the safe reliability requirements.

  17. THE ARCHITECTURE OF THE REMOTE CONTROL SYSTEM OF ROBOTICS OBJECTS

    Directory of Open Access Journals (Sweden)

    S.V. Shavetov

    2014-03-01

    Full Text Available The paper deals with the architecture for the universal remote control system of robotics objects over the Internet global network. Control objects are assumed to be located at a considerable distance from a reference device or end-users. An overview of studies on the subject matter of remote control of technical objects is given. A structure chart of the architecture demonstrating the system usage in practice is suggested. Server software is considered that makes it possible to work with technical objects connected to the server as with a serial port and organize a stable tunnel connection between the controlled object and the end-user. The proposed architecture has been successfully tested on mobile robots Parallax Boe-Bot and Lego Mindstorms NXT. Experimental data about values of time delays are given demonstrating the effectiveness of the considered architecture.

  18. Exploration Clinical Decision Support System: Medical Data Architecture

    Science.gov (United States)

    Lindsey, Tony; Shetye, Sandeep; Shaw, Tianna (Editor)

    2016-01-01

    The Exploration Clinical Decision Support (ECDS) System project is intended to enhance the Exploration Medical Capability (ExMC) Element for extended duration, deep-space mission planning in HRP. A major development guideline is the Risk of "Adverse Health Outcomes & Decrements in Performance due to Limitations of In-flight Medical Conditions". ECDS attempts to mitigate that Risk by providing crew-specific health information, actionable insight, crew guidance and advice based on computational algorithmic analysis. The availability of inflight health diagnostic computational methods has been identified as an essential capability for human exploration missions. Inflight electronic health data sources are often heterogeneous, and thus may be isolated or not examined as an aggregate whole. The ECDS System objective provides both a data architecture that collects and manages disparate health data, and an active knowledge system that analyzes health evidence to deliver case-specific advice. A single, cohesive space-ready decision support capability that considers all exploration clinical measurements is not commercially available at present. Hence, this Task is a newly coordinated development effort by which ECDS and its supporting data infrastructure will demonstrate the feasibility of intelligent data mining and predictive modeling as a biomedical diagnostic support mechanism on manned exploration missions. The initial step towards ground and flight demonstrations has been the research and development of both image and clinical text-based computer-aided patient diagnosis. Human anatomical images displaying abnormal/pathological features have been annotated using controlled terminology templates, marked-up, and then stored in compliance with the AIM standard. These images have been filtered and disease characterized based on machine learning of semantic and quantitative feature vectors. The next phase will evaluate disease treatment response via quantitative linear

  19. Imaging radars: System architectures and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Torre, Andrea [Thales Alenia Space Italia S.p.A., Via Saccomuro 24, 00131 Roma (Italy); Angino, Giuseppe, E-mail: giuseppe.angino@thalesaleniaspace.com [Thales Alenia Space Italia S.p.A., Via Saccomuro 24, 00131 Roma (Italy)

    2013-08-21

    The potentiality of multichannel SAR to provide wide swath and high resolution at the same time has been described in many papers in the last past years. The scope of this paper is to address some of the architectural and technological aspects related to the implementation of a multichannel receiver for a multibeam SAR, with the objective to provide some solutions for different configurations with increased complexity. A further point is the exploitation of the multichannel configuration for the implementation of very high resolution modes.

  20. Architectural transformations in network services and distributed systems

    CERN Document Server

    Luntovskyy, Andriy

    2017-01-01

    With the given work we decided to help not only the readers but ourselves, as the professionals who actively involved in the networking branch, with understanding the trends that have developed in recent two decades in distributed systems and networks. Important architecture transformations of distributed systems have been examined. The examples of new architectural solutions are discussed. Content Periodization of service development Energy efficiency Architectural transformations in Distributed Systems Clustering and Parallel Computing, performance models Cloud Computing, RAICs, Virtualization, SDN Smart Grid, Internet of Things, Fog Computing Mobile Communication from LTE to 5G, DIDO, SAT-based systems Data Security Guaranteeing Distributed Systems Target Groups Students in EE and IT of universities and (dual) technical high schools Graduated engineers as well as teaching staff About the Authors Andriy Luntovskyy provides classes on networks, mobile communication, software technology, distributed systems, ...

  1. The Double-System Architecture for Trusted OS

    Science.gov (United States)

    Zhao, Yong; Li, Yu; Zhan, Jing

    With the development of computer science and technology, current secure operating systems failed to respond to many new security challenges. Trusted operating system (TOS) is proposed to try to solve these problems. However, there are no mature, unified architectures for the TOS yet, since most of them cannot make clear of the relationship between security mechanism and the trusted mechanism. Therefore, this paper proposes a double-system architecture (DSA) for the TOS to solve the problem. The DSA is composed of the Trusted System (TS) and the Security System (SS). We constructed the TS by establishing a trusted environment and realized related SS. Furthermore, we proposed the Trusted Information Channel (TIC) to protect the information flow between TS and SS. In a word, the double system architecture we proposed can provide reliable protection for the OS through the SS with the supports provided by the TS.

  2. Another interpretation of stigmergy for product-driven systems architecture

    OpenAIRE

    Pannequin, Rémi; Thomas, André

    2012-01-01

    International audience; Product-driven systems (PDS) may enable manufacturing companies to meet business demands more quickly and effectively, by localizing decision as near as possible to the material flows. However, the actual architecture of a PDS is still not well defined. This paper proposes a PDS architecture based on a particular interpretation of the concept of stigmergy, where cooperation between production actors is achieved thanks to attributes (informational pheromones) attached t...

  3. 40 CFR 257.22 - Ground-water monitoring systems.

    Science.gov (United States)

    2010-07-01

    ... operator. When physical obstacles preclude installation of ground-water monitoring wells at the relevant... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Ground-water monitoring systems. 257... Waste Disposal Units Ground-Water Monitoring and Corrective Action § 257.22 Ground-water......

  4. Integrating hospital information systems in healthcare institutions: a mediation architecture.

    Science.gov (United States)

    El Azami, Ikram; Cherkaoui Malki, Mohammed Ouçamah; Tahon, Christian

    2012-10-01

    Many studies have examined the integration of information systems into healthcare institutions, leading to several standards in the healthcare domain (CORBAmed: Common Object Request Broker Architecture in Medicine; HL7: Health Level Seven International; DICOM: Digital Imaging and Communications in Medicine; and IHE: Integrating the Healthcare Enterprise). Due to the existence of a wide diversity of heterogeneous systems, three essential factors are necessary to fully integrate a system: data, functions and workflow. However, most of the previous studies have dealt with only one or two of these factors and this makes the system integration unsatisfactory. In this paper, we propose a flexible, scalable architecture for Hospital Information Systems (HIS). Our main purpose is to provide a practical solution to insure HIS interoperability so that healthcare institutions can communicate without being obliged to change their local information systems and without altering the tasks of the healthcare professionals. Our architecture is a mediation architecture with 3 levels: 1) a database level, 2) a middleware level and 3) a user interface level. The mediation is based on two central components: the Mediator and the Adapter. Using the XML format allows us to establish a structured, secured exchange of healthcare data. The notion of medical ontology is introduced to solve semantic conflicts and to unify the language used for the exchange. Our mediation architecture provides an effective, promising model that promotes the integration of hospital information systems that are autonomous, heterogeneous, semantically interoperable and platform-independent.

  5. System design in an evolving system-of-systems architecture and concept of operations

    Science.gov (United States)

    Rovekamp, Roger N., Jr.

    Proposals for space exploration architectures have increased in complexity and scope. Constituent systems (e.g., rovers, habitats, in-situ resource utilization facilities, transfer vehicles, etc) must meet the needs of these architectures by performing in multiple operational environments and across multiple phases of the architecture's evolution. This thesis proposes an approach for using system-of-systems engineering principles in conjunction with system design methods (e.g., Multi-objective optimization, genetic algorithms, etc) to create system design options that perform effectively at both the system and system-of-systems levels, across multiple concepts of operations, and over multiple architectural phases. The framework is presented by way of an application problem that investigates the design of power systems within a power sharing architecture for use in a human Lunar Surface Exploration Campaign. A computer model has been developed that uses candidate power grid distribution solutions for a notional lunar base. The agent-based model utilizes virtual control agents to manage the interactions of various exploration and infrastructure agents. The philosophy behind the model is based both on lunar power supply strategies proposed in literature, as well as on the author's own approaches for power distribution strategies of future lunar bases. In addition to proposing a framework for system design, further implications of system-of-systems engineering principles are briefly explored, specifically as they relate to producing more robust cross-cultural system-of-systems architecture solutions.

  6. Development of a Conceptual Structure for Architectural Solar Energy Systems.

    Science.gov (United States)

    Ringel, Robert F.

    Solar subsystems and components were identified and conceptual structure was developed for architectural solar energy heating and cooling systems. Recent literature related to solar energy systems was reviewed and analyzed. Solar heating and cooling system, subsystem, and component data were compared for agreement and completeness. Significant…

  7. A new flight control and management system architecture and configuration

    Science.gov (United States)

    Kong, Fan-e.; Chen, Zongji

    2006-11-01

    The advanced fighter should possess the performance such as super-sound cruising, stealth, agility, STOVL(Short Take-Off Vertical Landing),powerful communication and information processing. For this purpose, it is not enough only to improve the aerodynamic and propulsion system. More importantly, it is necessary to enhance the control system. A complete flight control system provides not only autopilot, auto-throttle and control augmentation, but also the given mission management. F-22 and JSF possess considerably outstanding flight control system on the basis of pave pillar and pave pace avionics architecture. But their control architecture is not enough integrated. The main purpose of this paper is to build a novel fighter control system architecture. The control system constructed on this architecture should be enough integrated, inexpensive, fault-tolerant, high safe, reliable and effective. And it will take charge of both the flight control and mission management. Starting from this purpose, this paper finishes the work as follows: First, based on the human nervous control, a three-leveled hierarchical control architecture is proposed. At the top of the architecture, decision level is in charge of decision-making works. In the middle, organization & coordination level will schedule resources, monitor the states of the fighter and switch the control modes etc. And the bottom is execution level which holds the concrete drive and measurement; then, according to their function and resources all the tasks involving flight control and mission management are sorted to individual level; at last, in order to validate the three-leveled architecture, a physical configuration is also showed. The configuration is distributed and applies some new advancement in information technology industry such line replaced module and cluster technology.

  8. A Geo-Distributed System Architecture for Different Domains

    Science.gov (United States)

    Moßgraber, Jürgen; Middleton, Stuart; Tao, Ran

    2013-04-01

    The presentation will describe work on the system-of-systems (SoS) architecture that is being developed in the EU FP7 project TRIDEC on "Collaborative, Complex and Critical Decision-Support in Evolving Crises". In this project we deal with two use-cases: Natural Crisis Management (e.g. Tsunami Early Warning) and Industrial Subsurface Development (e.g. drilling for oil). These use-cases seem to be quite different at first sight but share a lot of similarities, like managing and looking up available sensors, extracting data from them and annotate it semantically, intelligently manage the data (big data problem), run mathematical analysis algorithms on the data and finally provide decision support on this basis. The main challenge was to create a generic architecture which fits both use-cases. The requirements to the architecture are manifold and the whole spectrum of a modern, geo-distributed and collaborative system comes into play. Obviously, one cannot expect to tackle these challenges adequately with a monolithic system or with a single technology. Therefore, a system architecture providing the blueprints to implement the system-of-systems approach has to combine multiple technologies and architectural styles. The most important architectural challenges we needed to address are 1. Build a scalable communication layer for a System-of-sytems 2. Build a resilient communication layer for a System-of-sytems 3. Efficiently publish large volumes of semantically rich sensor data 4. Scalable and high performance storage of large distributed datasets 5. Handling federated multi-domain heterogeneous data 6. Discovery of resources in a geo-distributed SoS 7. Coordination of work between geo-distributed systems The design decisions made for each of them will be presented. These developed concepts are also applicable to the requirements of the Future Internet (FI) and Internet of Things (IoT) which will provide services like smart grids, smart metering, logistics and

  9. Disruptive Logic Architectures and Technologies From Device to System Level

    CERN Document Server

    Gaillardon, Pierre-Emmanuel; Clermidy, Fabien

    2012-01-01

    This book discusses the opportunities offered by disruptive technologies to overcome the economical and physical limits currently faced by the electronics industry. It provides a new methodology for the fast evaluation of an emerging technology from an architectural perspective and discusses the implications from simple circuits to complex architectures. Several technologies are discussed, ranging from 3-D integration of devices (Phase Change Memories, Monolithic 3-D, Vertical NanoWires-based transistors) to dense 2-D arrangements (Double-Gate Carbon Nanotubes, Sublithographic Nanowires, Lithographic Crossbar arrangements). Novel architectural organizations, as well as the associated tools, are presented in order to explore this freshly opened design space. Describes a novel architectural organization for future reconfigurable systems; Includes a complete benchmarking toolflow for emerging technologies; Generalizes the description of reconfigurable circuits in terms of hierarchical levels; Assesses disruptive...

  10. A compact, coherent light source system architecture

    Science.gov (United States)

    Biedron, S. G.; Dattoli, G.; DiPalma, E.; Einstein, J.; Milton, S. V.; Petrillo, V.; Rau, J. V.; Sabia, E.; Spassovsky, I. P.; van der Slot, P. J. M.

    2016-09-01

    Our team has been examining several architectures for short-wavelength, coherent light sources. We are presently exploring the use and role of advanced, high-peak power lasers for both accelerating the electrons and generating a compact light source with the same laser. Our overall goal is to devise light sources that are more accessible by industry and in smaller laboratory settings. Although we cannot and do not want to compete directly with sources such as third-generation light sources or that of national-laboratory-based free-electron lasers, we have several interesting schemes that could bring useful and more coherent, short-wavelength light source to more researchers. Here, we present and discuss several results of recent simulations and our future steps for such dissemination.

  11. Research on Architecture of Enterprise Modeling in Workflow System

    Institute of Scientific and Technical Information of China (English)

    李伟平; 齐慧彬; 薛劲松; 朱云龙

    2002-01-01

    The market that an enterprise is faced is changing and can 't be forecastedaccurately in this information time. In order to find the chances in the marketpractitioners have focused on business processes through their re-engineeringprogramme to improve enterprise efficiency. It is necessary to manage an enterpriseusing process-based method for the requirement of enhancing work efficiency and theability of competition in the market. And information system developers haveemphasized the use of standard models to accelerate the speed of configuration andimplementation of integrated systems for enterprises. So we have to model anenterprise with process-based modeling method. An architecture of enterprise modelingis presented in this paper. This architecture is composed of four views and supportingthe whole lifecycle of enterprise model. Because workflow management system is basedon process definition, this architecture can be directly used in the workflowmanagement system. The implement method of this model was thoroughly describedmeanwhile the workflow management software supporting the building and running themodel was also given.

  12. Technology System Architecture for Web–Based Education

    Directory of Open Access Journals (Sweden)

    A. Canales–Cruz

    2009-04-01

    Full Text Available In this paper a new architecture for development of Web–Based Education systems is presented. The se systems are centered in the learner and adapted to their personals needs in intelligent form. The architecture is based on the IEEE 1484 LTSA (Learning Technology System Architecture specification and it assembles to software development and instructional design patterns. On the one hand, the software development pattern is supported under a Multi–Agents System, it employs the methods and technical of the Domain Engineering for development of IRLCOO (Intelligent Reusable Learning Components Object Oriented. IRLCOO are a special type of Sharable Content Object according to SCORM (Sharable Content Object Reusable Model. On the other hand, the instructional design pattern incorporates a mental model as the Conceptual Maps to transmit, build and generate appropriate knowledge to this educational environment type.

  13. Architecture Level Safety Analyses for Safety-Critical Systems

    Directory of Open Access Journals (Sweden)

    K. S. Kushal

    2017-01-01

    Full Text Available The dependency of complex embedded Safety-Critical Systems across Avionics and Aerospace domains on their underlying software and hardware components has gradually increased with progression in time. Such application domain systems are developed based on a complex integrated architecture, which is modular in nature. Engineering practices assured with system safety standards to manage the failure, faulty, and unsafe operational conditions are very much necessary. System safety analyses involve the analysis of complex software architecture of the system, a major aspect in leading to fatal consequences in the behaviour of Safety-Critical Systems, and provide high reliability and dependability factors during their development. In this paper, we propose an architecture fault modeling and the safety analyses approach that will aid in identifying and eliminating the design flaws. The formal foundations of SAE Architecture Analysis & Design Language (AADL augmented with the Error Model Annex (EMV are discussed. The fault propagation, failure behaviour, and the composite behaviour of the design flaws/failures are considered for architecture safety analysis. The illustration of the proposed approach is validated by implementing the Speed Control Unit of Power-Boat Autopilot (PBA system. The Error Model Annex (EMV is guided with the pattern of consideration and inclusion of probable failure scenarios and propagation of fault conditions in the Speed Control Unit of Power-Boat Autopilot (PBA. This helps in validating the system architecture with the detection of the error event in the model and its impact in the operational environment. This also provides an insight of the certification impact that these exceptional conditions pose at various criticality levels and design assurance levels and its implications in verifying and validating the designs.

  14. In Situ Measurement of the Undisturbed Ground Temperature for Ground Source Heat Pump System

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ya-su

    2008-01-01

    The undisturbed ground are important for design of the ground heat exchangers in ground source heat pump (GSHP) systems. In this paper, the undisturbed ground temperatures measured in two different methods are presented. The investigation was carried out in two cases. The temperature measured with the direct method is assumed to give the correct undisturbed ground temperature profile. The temperature measured with indirect method overestimates the undisturbed ground temperature by 2.1℃ and 1.7℃. This difference is mainly caused by the circulation pump and ambient air to the fluid. Therefore, the results that are decreased about 2℃ as compared with the indirect measured are recommended to estimate the undisturbed ground temperature in situ measuring. A smaller pump or deeper borehole or mild weather would result in a more correct temperature. Because the undisturbed ground temperature is affected by many factors. Whether or not these conclusions are correct to other areas, this would need further investigation.

  15. Developing Distributed System With Service Resource Oriented Architecture

    Directory of Open Access Journals (Sweden)

    Riyanarto Sarno

    2012-06-01

    Full Text Available Service Oriented Architecture is a design paradigm in software engineering with which a distributed system is built for an enterprise. This paradigm aims at providing the system as a service through a protocol in web service technology, namely Simple Object Access Protocol (SOAP. However, SOA is service level agreements of webservice. For this reason, this reasearch aims at combining SOA with Resource Oriented Architecture in order to expand scalability of services. This combination creates Sevice Resource Oriented Architecture (SROA with which a distributed system is developed that integrates services within project management software. Following this design, the software is developed according to a framework of Agile Model Driven Development which can reduce complexities of the whole process of software development.

  16. Architecture for Multi-Technology Real-Time Location Systems

    Directory of Open Access Journals (Sweden)

    Javier Rodas

    2013-02-01

    Full Text Available The rising popularity of location-based services has prompted considerable research in the field of indoor location systems. Since there is no single technology to support these systems, it is necessary to consider the fusion of the information coming from heterogeneous sensors. This paper presents a software architecture designed for a hybrid location system where we can merge information from multiple sensor technologies. The architecture was designed to be used by different kinds of actors independently and with mutual transparency: hardware administrators, algorithm developers and user applications. The paper presents the architecture design, work-flow, case study examples and some results to show how different technologies can be exploited to obtain a good estimation of a target position.

  17. Syst\\`emes interactifs sensibles aux \\'emotions : architecture logicielle

    CERN Document Server

    Clay, Alexis

    2007-01-01

    We propose a software architecture for interactive systems which allows integrating the user's emotion. Emotion can be involved in interaction at several levels. In our application case - ballet dance - emotions is explicitely manipulated by the interactive system to produce emotion-wise output. Our architecture model to develop emotion-wise applications is based on the PAC-Amodeus model. We add a branch to this model, divided into three components: Data capture, analysis and cue extraction, and finally interpretation of those cues. We show the different data flows between this architecture's components depending on the entry point of the emotion branch within the system. We then illustrate our model by describing our application case: capturing a ballet dancer's movement to extract the emotions he expresses and use these emotions to generate graphical content that is displayed on stage.

  18. On the Architecture of Systems for Situation Awareness

    NARCIS (Netherlands)

    Borth, M.

    2013-01-01

    Architectures for situation awareness systems originate from two main concerns: a functional view on the information processing that stems from domain experts’ understanding of their tasks and resources, and a system architect’s view on non-functional aspects of the operations that form such functio

  19. A software architecture for knowledge-based systems

    NARCIS (Netherlands)

    Fensel, D; Groenboom, R

    1999-01-01

    The paper introduces a software architecture for the specification and verification of knowledge-based systems combining conceptual and formal techniques. Our focus is component-based specification enabling their reuse. We identify four elements of the specification of a knowledge-based system: a ta

  20. A software architecture for knowledge-based systems

    NARCIS (Netherlands)

    Fensel, D; Groenboom, R

    The paper introduces a software architecture for the specification and verification of knowledge-based systems combining conceptual and formal techniques. Our focus is component-based specification enabling their reuse. We identify four elements of the specification of a knowledge-based system: a

  1. Using Software Architectures for Designing Distributed Embedded Systems

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    In this paper, we outline an on-going project of designing distributed embedded systems for closed-loop process control. The project is a joint effort between software architecture researchers and developers from two companies that produce commercial embedded process control systems. The project...

  2. On the Architecture of Systems for Situation Awareness

    NARCIS (Netherlands)

    Borth, M.

    2013-01-01

    Architectures for situation awareness systems originate from two main concerns: a functional view on the information processing that stems from domain experts’ understanding of their tasks and resources, and a system architect’s view on non-functional aspects of the operations that form such

  3. Architectural design - Conception and specification of interactive systems

    NARCIS (Netherlands)

    Vissers, C.A.; Ferreira Pires, Luis; Quartel, Dick; van Sinderen, Marten J.

    2016-01-01

    This book presents a design methodology that is practically applicable to the architectural design of a broad range of systems. It is based on fundamental design concepts to conceive and specify the required functional properties of a system, while abstracting from the specific implementation

  4. System architecture of communication infrastructures for PPDR organisations

    Science.gov (United States)

    Müller, Wilmuth

    2017-04-01

    The growing number of events affecting public safety and security (PS and S) on a regional scale with potential to grow up to large scale cross border disasters puts an increased pressure on organizations responsible for PS and S. In order to respond timely and in an adequate manner to such events Public Protection and Disaster Relief (PPDR) organizations need to cooperate, align their procedures and activities, share the needed information and be interoperable. Existing PPDR/PMR technologies do not provide broadband capability, which is a major limitation in supporting new services hence new information flows and currently they have no successor. There is also no known standard that addresses interoperability of these technologies. The paper at hands provides an approach to tackle the above mentioned aspects by defining an Enterprise Architecture (EA) of PPDR organizations and a System Architecture of next generation PPDR communication networks for a variety of applications and services on broadband networks, including the ability of inter-system, inter-agency and cross-border operations. The Open Safety and Security Architecture Framework (OSSAF) provides a framework and approach to coordinate the perspectives of different types of stakeholders within a PS and S organization. It aims at bridging the silos in the chain of commands and on leveraging interoperability between PPDR organizations. The framework incorporates concepts of several mature enterprise architecture frameworks including the NATO Architecture Framework (NAF). However, OSSAF is not providing details on how NAF should be used for describing the OSSAF perspectives and views. In this contribution a mapping of the NAF elements to the OSSAF views is provided. Based on this mapping, an EA of PPDR organizations with a focus on communication infrastructure related capabilities is presented. Following the capability modeling, a system architecture for secure and interoperable communication infrastructures

  5. On the Grounds of Modern Architecture: An Interview with Kenneth Frampton

    Directory of Open Access Journals (Sweden)

    Thomas McQuillan

    2016-11-01

    Full Text Available In connection with the publication of Kenneth Frampton’s 'A Genealogy of Modern Architecture: Comparative Critical Analysis of Built Form', Thomas McQuillan conducted an interview in March of 2016 with Frampton to discuss the book’s background and the implications publication has for contemporary architecture. The book consists of close comparative analyses of 28 modern buildings, two by two, in order to interrogate their spatial, constructive, envelopmental, and programmatic characteristics. Prefaced by a synoptic note, with a highly concentrated exposition of the history of modern architecture, and building on his reading of Arendt’s 'The Human Condition', the book seeks the meaning of architecture in the tectonic — the way it is built — in more than just the spaces it affords and the images that it projects. Frampton shares the history of his ideas on tectonics and the fragility of the modern project in today’s neoliberal climate.

  6. Ground-target detection system for digital video database

    Science.gov (United States)

    Liang, Yiqing; Huang, Jeffrey R.; Wolf, Wayne H.; Liu, Bede

    1998-07-01

    As more and more visual information is available on video, information indexing and retrieval of digital video data is becoming important. A digital video database embedded with visual information processing using image analysis and image understanding techniques such as automated target detection, classification, and identification can provide query results of higher quality. We address in this paper a robust digital video database system within which a target detection module is implemented and applied onto the keyframe images extracted by our digital library system. The tasks and application scenarios under consideration involve indexing video with information about detection and verification of artificial objects that exist in video scenes. Based on the scenario that the video sequences are acquired by an onboard camera mounted on Predator unmanned aircraft, we demonstrate how an incoming video stream is structured into different levels -- video program level, scene level, shot level, and object level, based on the analysis of video contents using global imagery information. We then consider that the keyframe representation is most appropriate for video processing and it holds the property that can be used as the input for our detection module. As a result, video processing becomes feasible in terms of decreased computational resources spent and increased confidence in the (detection) decisions reached. The architecture we proposed can respond to the query of whether artificial structures and suspected combat vehicles are detected. The architecture for ground detection takes advantage of the image understanding paradigm and it involves different methods to locate and identify the artificial object rather than nature background such as tree, grass, and cloud. Edge detection, morphological transformation, line and parallel line detection using Hough transform applied on key frame images at video shot level are introduced in our detection module. This function can

  7. OPEN ARCHITECTURE CNC SYSTEM HITCNC AND KEY TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    WANG Yongzhang; LIU Tao; FU Hongya; HAN Zhenyu

    2007-01-01

    Aiming at the characteristics of modularity and reconfigurable in open architecture computer numerical control (CNC) system, the open architecture CNC system, Harbin Institute of Technology computer numerical control (HITCNC), is researched and manufactured based on the interface standards. The system's external interfaces are coincident with the corresponding international standards, and the internal interfaces follow the open modular architecture controller (OMAC) agreement.In the research and manufacturing process, object-oriented technology is used to ensure thc openness of the HITCNC, and static programming is applied in the CNC system according to the idea of modularization disassembly. The HITCNC also actualizes real-time and unreal-time modules adopting real-time dynamical linked library (RTDLL) and component object model (COM). Finite state machine (FSM) is adopted to do dynamically modeling of HITCNC. The complete separation between the software and the hardware is achieved in the HITCNC by applying the SoftSERCANS technique.The application of the above key techniques decreases the programming workload greatly, and uses software programs replacing hardware functions, which offers plenty technique ensures for the openness of HITCNC. Finally, based on the HITCNC, a three-dimensional milling system is established.On the system, series experiments are done to validate the expandability and interchangeability of HITCNC. The results of the experiments show that the established open architecture CNC system HITCNC is correct and feasible, and has good openness.

  8. Proposed lidar receiver architecture for the CZMIL system

    Science.gov (United States)

    Payment, Andy; Feygels, Viktor; Fuchs, Eran

    2010-04-01

    The Coastal Zone Mapping and Imaging Lidar (CZMIL)1 system is a new generation airborne remote sensing system. The multi-sensor system integrates a lidar system, hyperspectral camera, digital camera, and a positioning system together to seamlessly record data over topographic and bathymetric environments. The recorded data is post-processed using data fusion algorithms to generate image products. In order to amplify the amount of information contained within the data fed to the algorithms, the architecture of the lidar receiver is designed using numerous techniques to maximize the quality of the recorded data. The receiver architecture employs commercial photomultiplier tubes operated in a logarithmic mode coupled to 10bit, 1GHz analog to digital converters. This architecture achieves sufficient dynamic range to support operating the system in both terrestrial and ocean environments. The multi-channel design of the lidar system requires the digitization of 9 channels of optical return signal data. The resulting large data volume necessitated design of a novel data reduction strategy. These important aspects of the lidar receiver's design are presented. The strategies illustrate how the receiver's architecture is designed to optimize the fidelity of the recorded data.

  9. The Architecture Improvement Method: cost management and systemic learning about strategic product architectures

    NARCIS (Netherlands)

    Weerd-Nederhof, de Petra C.; Wouters, Marc J.F.; Teuns, Steven J.A.; Hissel, Paul H.

    2007-01-01

    The architecture improvement method (AIM) is a method for multidisciplinary product architecture improvement, addressing uncertainty and complexity and incorporating feedback loops, facilitating trade-off decision making during the architecture creation process. The research reported in this paper d

  10. PDS4: Meeting Big Data Challenges Via a Model-Driven Planetary Science Data Architecture and System

    Science.gov (United States)

    Law, E.; Hughes, J. S.; Crichton, D. J.; Hardman, S. H.; Joyner, R.; Ramirez, P.

    2014-12-01

    Big science data management entails cataloging, processing, distribution, multiple ways of analyzing and interpreting the data, long-term preservation, and international cooperation of massive amount of scientific data. PDS4, the next generation of the Planetary Data System (PDS), uses an information model-driven architectural approach coupled with modern information technologies and standards to meet theses challenges of big science data management. PDS4 is an operational example of the use of an explicit data system architecture and an ontology-base information model to drive the development, operations, and evolution of a scalable data system along the entire science data lifecycle from ground systems to the archives. This overview of PDS4 will include a description of its model-driven approach and its overall systems architecture. It will illustrate how the system is being used to help meet the expectations of modern scientists for interoperable data systems and correlatable data in the Big Data era.

  11. Space Station needs, attributes and architectural options. Volume 2, book 2, part 2, Task 2: Information management system

    Science.gov (United States)

    1983-01-01

    Missions to be performed, station operations and functions to be carried out, and technologies anticipated during the time frame of the space station were examined in order to determine the scope of the overall information management system for the space station. This system comprises: (1) the data management system which includes onboard computer related hardware and software required to assume and exercise control of all activities performed on the station; (2) the communication system for both internal and external communications; and (3) the ground segment. Techniques used to examine the information system from a functional and performance point of view are described as well as the analyses performed to derive the architecture of both the onboard data management system and the system for internal and external communications. These architectures are then used to generate a conceptual design of the onboard elements in order to determine the physical parameters (size/weight/power) of the hardware and software. The ground segment elements are summarized.

  12. An agile and cooperative architecture for distributed manufacturing systems

    OpenAIRE

    Leitão, Paulo; Restivo, Francisco

    2001-01-01

    World-wide competition among enterprises leads to the need for new systems to perform the control of distributed manufacturing systems, through the integration of information systems and self-organisation features, in order to adapt quickly to the environment changes. This paper presents an agile and cooperative architecture for distributed manufacturing systems based in the multiagent technology which implements some holonic and bionic concepts and supports a new control approach, including ...

  13. The architecture of the management system of complex steganographic information

    Science.gov (United States)

    Evsutin, O. O.; Meshcheryakov, R. V.; Kozlova, A. S.; Solovyev, T. M.

    2017-01-01

    The aim of the study is to create a wide area information system that allows one to control processes of generation, embedding, extraction, and detection of steganographic information. In this paper, the following problems are considered: the definition of the system scope and the development of its architecture. For creation of algorithmic maintenance of the system, classic methods of steganography are used to embed information. Methods of mathematical statistics and computational intelligence are used to identify the embedded information. The main result of the paper is the development of the architecture of the management system of complex steganographic information. The suggested architecture utilizes cloud technology in order to provide service using the web-service via the Internet. It is meant to provide streams of multimedia data processing that are streams with many sources of different types. The information system, built in accordance with the proposed architecture, will be used in the following areas: hidden transfer of documents protected by medical secrecy in telemedicine systems; copyright protection of online content in public networks; prevention of information leakage caused by insiders.

  14. Supervisory Control System Architecture for Advanced Small Modular Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Cetiner, Sacit M [ORNL; Cole, Daniel L [University of Pittsburgh; Fugate, David L [ORNL; Kisner, Roger A [ORNL; Melin, Alexander M [ORNL; Muhlheim, Michael David [ORNL; Rao, Nageswara S [ORNL; Wood, Richard Thomas [ORNL

    2013-08-01

    This technical report was generated as a product of the Supervisory Control for Multi-Modular SMR Plants project within the Instrumentation, Control and Human-Machine Interface technology area under the Advanced Small Modular Reactor (SMR) Research and Development Program of the U.S. Department of Energy. The report documents the definition of strategies, functional elements, and the structural architecture of a supervisory control system for multi-modular advanced SMR (AdvSMR) plants. This research activity advances the state-of-the art by incorporating decision making into the supervisory control system architectural layers through the introduction of a tiered-plant system approach. The report provides a brief history of hierarchical functional architectures and the current state-of-the-art, describes a reference AdvSMR to show the dependencies between systems, presents a hierarchical structure for supervisory control, indicates the importance of understanding trip setpoints, applies a new theoretic approach for comparing architectures, identifies cyber security controls that should be addressed early in system design, and describes ongoing work to develop system requirements and hardware/software configurations.

  15. Mark 4A antenna control system data handling architecture study

    Science.gov (United States)

    Briggs, H. C.; Eldred, D. B.

    1991-01-01

    A high-level review was conducted to provide an analysis of the existing architecture used to handle data and implement control algorithms for NASA's Deep Space Network (DSN) antennas and to make system-level recommendations for improving this architecture so that the DSN antennas can support the ever-tightening requirements of the next decade and beyond. It was found that the existing system is seriously overloaded, with processor utilization approaching 100 percent. A number of factors contribute to this overloading, including dated hardware, inefficient software, and a message-passing strategy that depends on serial connections between machines. At the same time, the system has shortcomings and idiosyncrasies that require extensive human intervention. A custom operating system kernel and an obscure programming language exacerbate the problems and should be modernized. A new architecture is presented that addresses these and other issues. Key features of the new architecture include a simplified message passing hierarchy that utilizes a high-speed local area network, redesign of particular processing function algorithms, consolidation of functions, and implementation of the architecture in modern hardware and software using mainstream computer languages and operating systems. The system would also allow incremental hardware improvements as better and faster hardware for such systems becomes available, and costs could potentially be low enough that redundancy would be provided economically. Such a system could support DSN requirements for the foreseeable future, though thorough consideration must be given to hard computational requirements, porting existing software functionality to the new system, and issues of fault tolerance and recovery.

  16. The Snowcloud System: Architecture and Algorithms for Snow Hydrology Studies

    Science.gov (United States)

    Skalka, C.; Brown, I.; Frolik, J.

    2013-12-01

    Snowcloud is an embedded data collection system for snow hydrology field research campaigns conducted in harsh climates and remote areas. The system combines distributed wireless sensor network technology and computational techniques to provide data at lower cost and higher spatio-temporal resolution than ground-based systems using traditional methods. Snowcloud has seen multiple Winter deployments in settings ranging from high desert to arctic, resulting in over a dozen node-years of practical experience. The Snowcloud system architecture consists of multiple TinyOS mesh-networked sensor stations collecting environmental data above and, in some deployments, below the snowpack. Monitored data modalities include snow depth, ground and air temperature, PAR and leaf-area index (LAI), and soil moisture. To enable power cycling and control of multiple sensors a custom power and sensor conditioning board was developed. The electronics and structural systems for individual stations have been designed and tested (in the lab and in situ) for ease of assembly and robustness to harsh winter conditions. Battery systems and solar chargers enable seasonal operation even under low/no light arctic conditions. Station costs range between 500 and 1000 depending on the instrumentation suite. For remote field locations, a custom designed hand-held device and data retrieval protocol serves as the primary data collection method. We are also developing and testing a Gateway device that will report data in near-real-time (NRT) over a cellular connection. Data is made available to users via web interfaces that also provide basic data analysis and visualization tools. For applications to snow hydrology studies, the better spatiotemporal resolution of snowpack data provided by Snowcloud is beneficial in several aspects. It provides insight into snowpack evolution, and allows us to investigate differences across different spatial and temporal scales in deployment areas. It enables the

  17. Architecture of Network Management Tools for Heterogeneous System

    CERN Document Server

    Hassan, Rosilah; Mohseni, Shima; Mohamad, Ola; Ismail, Zahian

    2010-01-01

    Managing heterogeneous network systems is a difficult task because each of these networks has its own curious management system. These networks usually are constructed on independent management protocols which are not compatible with each other. This results in the coexistence of many management systems with different managing functions and services across enterprises. Incompatibility of different management systems makes management of whole system a very complex and often complicated job. Ideally, it is necessary to implement centralized metalevel management across distributed heterogeneous systems and their underlying supporting network systems where the information flow and guidance is provided via a single console or single operating panels which integrates all the management functions in spite of their individual protocols and structures. This paper attempts to provide a novel network management tool architecture which supports heterogeneous managements across many different architectural platforms. Furt...

  18. Working Group 11F Opening Comments NASA Planning for NASA's Future Ground Systems

    Science.gov (United States)

    Smith, Danford S.

    2016-01-01

    These are simple charts for the introductory comments to be made at the start of a panel session at the Ground System Architecture Workshop (GSAW2016). It is not meant as a formal paper, but rather contains information to prompt further discussion of the panel members and audience. The panel topic is: Embracing Change via the Use of Service-Based Frameworks and Products in an Enterprise.

  19. Transformation of legacy network management system to service oriented architecture

    Science.gov (United States)

    Sathyan, Jithesh; Shenoy, Krishnananda

    2007-09-01

    Service providers today are facing the challenge of operating and maintaining multiple networks, based on multiple technologies. Network Management System (NMS) solutions are being used to manage these networks. However the NMS is tightly coupled with Element or the Core network components. Hence there are multiple NMS solutions for heterogeneous networks. Current network management solutions are targeted at a variety of independent networks. The wide spread popularity of IP Multimedia Subsystem (IMS) is a clear indication that all of these independent networks will be integrated into a single IP-based infrastructure referred to as Next Generation Networks (NGN) in the near future. The services, network architectures and traffic pattern in NGN will dramatically differ from the current networks. The heterogeneity and complexity in NGN including concepts like Fixed Mobile Convergence will bring a number of challenges to network management. The high degree of complexity accompanying the network element technology necessitates network management systems (NMS) which can utilize this technology to provide more service interfaces while hiding the inherent complexity. As operators begin to add new networks and expand existing networks to support new technologies and products, the necessity of scalable, flexible and functionally rich NMS systems arises. Another important factor influencing NMS architecture is mergers and acquisitions among the key vendors. Ease of integration is a key impediment in the traditional hierarchical NMS architecture. These requirements trigger the need for an architectural framework that will address the NGNM (Next Generation Network Management) issues seamlessly. This paper presents a unique perspective of bringing service orientated architecture (SOA) to legacy network management systems (NMS). It advocates a staged approach in transforming a legacy NMS to SOA. The architecture at each stage is detailed along with the technical advantages and

  20. Optimal Ground Source Heat Pump System Design

    Energy Technology Data Exchange (ETDEWEB)

    Ozbek, Metin [ENVIRON; Yavuzturk, Cy [University of Hartford; Pinder, George [University of Vermont

    2015-04-15

    Despite the facts that GSHPs first gained popularity as early as the 1940’s and they can achieve 30 to 60 percent in energy savings and carbon emission reductions relative to conventional HVAC systems, the use of geothermal energy in the U.S. has been less than 1 percent of the total energy consumption. The key barriers preventing this technically-mature technology from reaching its full commercial potential have been its high installation cost and limited consumer knowledge and trust in GSHP systems to deliver the technology in a cost-effective manner in the market place. Led by ENVIRON, with support from University Hartford and University of Vermont, the team developed and tested a software-based a decision making tool (‘OptGSHP’) for the least-cost design of ground-source heat pump (‘GSHP’) systems. OptGSHP combines state of the art optimization algorithms with GSHP-specific HVAC and groundwater flow and heat transport simulation. The particular strength of OptGSHP is in integrating heat transport due to groundwater flow into the design, which most of the GSHP designs do not get credit for and therefore are overdesigned.

  1. Optimal Ground Source Heat Pump System Design

    Energy Technology Data Exchange (ETDEWEB)

    Ozbek, Metin [Environ Holdings Inc., Princeton, NJ (United States); Yavuzturk, Cy [Univ. of Hartford, West Hartford, CT (United States); Pinder, George [Univ. of Vermont, Burlington, VT (United States)

    2015-04-01

    Despite the facts that GSHPs first gained popularity as early as the 1940’s and they can achieve 30 to 60 percent in energy savings and carbon emission reductions relative to conventional HVAC systems, the use of geothermal energy in the U.S. has been less than 1 percent of the total energy consumption. The key barriers preventing this technically-mature technology from reaching its full commercial potential have been its high installation cost and limited consumer knowledge and trust in GSHP systems to deliver the technology in a cost-effective manner in the market place. Led by ENVIRON, with support from University Hartford and University of Vermont, the team developed and tested a software-based a decision making tool (‘OptGSHP’) for the least-cost design of ground-source heat pump (‘GSHP’) systems. OptGSHP combines state of the art optimization algorithms with GSHP-specific HVAC and groundwater flow and heat transport simulation. The particular strength of OptGSHP is in integrating heat transport due to groundwater flow into the design, which most of the GSHP designs do not get credit for and therefore are overdesigned.

  2. Communication System Architecture for Planetary Exploration

    Science.gov (United States)

    Braham, Stephen P.; Alena, Richard; Gilbaugh, Bruce; Glass, Brian; Norvig, Peter (Technical Monitor)

    2001-01-01

    Future human missions to Mars will require effective communications supporting exploration activities and scientific field data collection. Constraints on cost, size, weight and power consumption for all communications equipment make optimization of these systems very important. These information and communication systems connect people and systems together into coherent teams performing the difficult and hazardous tasks inherent in planetary exploration. The communication network supporting vehicle telemetry data, mission operations, and scientific collaboration must have excellent reliability, and flexibility.

  3. Reconfigurable radio systems network architectures and standards

    CERN Document Server

    Iacobucci, Maria Stella

    2013-01-01

    This timely book provides a standards-based view of the development, evolution, techniques and potential future scenarios for the deployment of reconfigurable radio systems.  After an introduction to radiomobile and radio systems deployed in the access network, the book describes cognitive radio concepts and capabilities, which are the basis for reconfigurable radio systems.  The self-organizing network features introduced in 3GPP standards are discussed and IEEE 802.22, the first standard based on cognitive radio, is described. Then the ETSI reconfigurable radio systems functional ar

  4. Architectural Prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    ' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural......A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

  5. Portable end-to-end ground system for low-cost mission support

    Science.gov (United States)

    Lam, Barbara

    1996-11-01

    This paper presents a revolutionary architecture of the end-to-end ground system to reduce overall mission support costs. The present ground system of the Jet Propulsion Laboratory (JPL) is costly to operate, maintain, deploy, reproduce, and document. In the present climate of shrinking NASA budgets, this proposed architecture takes on added importance as it should dramatically reduce all of the above costs. Currently, the ground support functions (i.e., receiver, tracking, ranging, telemetry, command, monitor and control) are distributed among several subsystems that are housed in individual rack-mounted chassis. These subsystems can be integrated into one portable laptop system using established Multi Chip Module (MCM) packaging technology and object-based software libraries. The large scale integration of subsystems into a small portable system connected to the World Wide Web (WWW) will greatly reduce operations, maintenance and reproduction costs. Several of the subsystems can be implemented using Commercial Off-The-Shelf (COTS) products further decreasing non-recurring engineering costs. The inherent portability of the system will open up new ways for using the ground system at the "point-of-use" site as opposed to maintaining several large centralized stations. This eliminates the propagation delay of the data to the Principal Investigator (PI), enabling the capture of data in real-time and performing multiple tasks concurrently from any location in the world. Sample applications are to use the portable ground system in remote areas or mobile vessels for real-time correlation of satellite data with earth-bound instruments; thus, allowing near real-time feedback and control of scientific instruments. This end-to-end portable ground system will undoubtedly create opportunities for better scientific observation and data acquisition.

  6. Harnessing piecewise-linear systems to construct dynamic logic architecture.

    Science.gov (United States)

    Peng, Haipeng; Yang, Yixian; Li, Lixiang; Luo, Hong

    2008-09-01

    This paper explores piecewise-linear systems to construct dynamic logic architecture. We present three schemes to obtain various basic logic gates, adders, and memory by using piecewise-linear systems. These schemes can switch easily among different operational roles by changing parameters. The proposed schemes are computationally efficient and easy to use. It is convenient for us to study and analyze them with the theory of linear systems.

  7. A Multiview Visualisation Architecture for Open Distributed Systems

    NARCIS (Netherlands)

    Hughes, E.; Oldengarm, P.; van Halteren, Aart

    1998-01-01

    Program visualisation is an attractive way for understanding collaboration structures of complex distributed systems. By using the concepts of the open distributed processing-reference model (ODP-RM) as entities for visualisation, a multiview visualisation architecture is presented, which provides a

  8. Phosphate-dependent root system architecture responses to salt stress

    NARCIS (Netherlands)

    Kawa, D.; Julkowska, M.M.; Montero Sommerfeld, H.; ter Horst, A.; Haring, M.A.; Testerink, C.

    2016-01-01

    Nutrient availability and salinity of the soil affect growth and development of plant roots. Here, we describe how phosphate availability affects root system architecture (RSA) of Arabidopsis and how phosphate levels modulate responses of the root to salt stress. Phosphate (Pi) starvation reduced ma

  9. An Architecture for Nested Transaction Support on Standard Database Systems

    NARCIS (Netherlands)

    Boertjes, E.M.; Grefen, P.W.P.J.; Vonk, J.; Apers, Peter M.G.

    Many applications dealing with complex processes require database support for nested transactions. Current commercial database systems lack this kind of support, offering flat, non-nested transactions only. This paper presents a three-layer architecture for implementing nested transaction support on

  10. Characterization of alfalfa populations contrasting for root system architecture (RSA)

    Science.gov (United States)

    The root system architecture affects the capacity for nutrient and water uptake thus impacting biomass yield production and may contribute to the persistence of perennial plants. The objectives of this study were to phenotype the roots of three alfalfa populations and identify differences between di...

  11. Architecture of fast IP forwarding engine in gigabit ethernet system

    Science.gov (United States)

    Do, Han C.; Lee, Hyeong H.; Cha, Kyoon Hyun

    1999-11-01

    In recent years, Internet traffic has been increased rapidly as a result of the Internet which accommodates multimedia traffic such as IP telephony and video conference. Gigabit routing technology is one possible approach to handle such internet traffic. This paper presents an efficient IP forwarding architecture adequate for Gigabit Ethernet switching system. The presented IP forwarding architecture is based upon distributed and pipelined process, which can effectively facilitate searching, editing, traffic classification, forwarding, and traffic management in parallel. Additionally, it can also process packets at full wire-speed in the ASIC level.

  12. Architecture Design Approaches and Issues in Cross Layer Systems

    DEFF Research Database (Denmark)

    Cattoni, Andrea Fabio; Sørensen, Troels Bundgaard; Mogensen, Preben

    2012-01-01

    the traditional protocol stack design methodology. However, Cross Layer also carries a risk due to possibly unexpected and undesired effects. In this chapter we want to provide architecture designers with a set of tools and recommendations synthesized from an analysis of the state of art, but enriched......Wireless communications are a fast grown part of the telecommunication market. While new types of traffic and challenges related to the wireless medium are appearing, the methodologies for designing system architectures are substantially remaining the same. Under the increasing pressure of market...

  13. Automated evaluation of service oriented architecture systems: a case study

    Science.gov (United States)

    Fouad, Hesham; Gilliam, Antonio; Guleyupoglu, Suleyman; Russell, Stephen M.

    2017-05-01

    The Service Oriented Architecture (SOA) model is fast gaining dominance in how software applications are built. They allow organizations to capitalize on existing services and share data amongst distributed applications. The automatic evaluation of SOA systems poses a challenging problem due to three factors: technological complexity, organizational incompatibility, and integration into existing development pipelines. In this paper we describe our experience in developing and deploying an automated evaluation capability for the Marine Corps' Tactical Service Oriented Architecture (TSOA). We outline the technological, policy, and operational challenges we face and how we are addressing them.

  14. Video signals integrator (VSI) system architecture

    Science.gov (United States)

    Kasprowicz, Grzegorz; Pastuszak, Grzegorz; Poźniak, Krzysztof; Trochimiuk, Maciej; Abramowski, Andrzej; Gaska, Michal; Bukowiecka, Danuta; Tyburska, Agata; Struniawski, Jarosław; Jastrzebski, Pawel; Jewartowski, Blazej; Frasunek, Przemysław; Nalbach-Moszynska, Małgorzata; Brawata, Sebastian; Bubak, Iwona; Gloza, Małgorzata

    2016-09-01

    The purpose of the project is development of a platform which integrates video signals from many sources. The signals can be sourced by existing analogue CCTV surveillance installations, recent internet-protocol (IP) cameras or single cameras of any type. The system will consist of portable devices that provide conversion, encoding, transmission and archiving. The sharing subsystem will use distributed file system and also user console which provides simultaneous access to any of video streams in real time. The system is fully modular so its extension is possible, both from hardware and software side. Due to standard modular technology used, partial technology modernization is also possible during a long exploitation period.

  15. Earth Orbiting Support Systems for commercial low Earth orbit data relay: Assessing architectures through tradespace exploration

    Science.gov (United States)

    Palermo, Gianluca; Golkar, Alessandro; Gaudenzi, Paolo

    2015-06-01

    As small satellites and Sun Synchronous Earth Observation systems are assuming an increased role in nowadays space activities, including commercial investments, it is of interest to assess how infrastructures could be developed to support the development of such systems and other spacecraft that could benefit from having a data relay service in Low Earth Orbit (LEO), as opposed to traditional Geostationary relays. This paper presents a tradespace exploration study of the architecture of such LEO commercial satellite data relay systems, here defined as Earth Orbiting Support Systems (EOSS). The paper proposes a methodology to formulate architectural decisions for EOSS constellations, and enumerate the corresponding tradespace of feasible architectures. Evaluation metrics are proposed to measure benefits and costs of architectures; lastly, a multicriteria Pareto criterion is used to downselect optimal architectures for subsequent analysis. The methodology is applied to two case studies for a set of 30 and 100 customer-spacecraft respectively, representing potential markets for LEO services in Exploration, Earth Observation, Science, and CubeSats. Pareto analysis shows how increased performance of the constellation is always achieved by an increased node size, as measured by the gain of the communications antenna mounted on EOSS spacecraft. On the other hand, nonlinear trends in optimal orbital altitude, number of satellites per plane, and number of orbital planes, are found in both cases. An upward trend in individual node memory capacity is found, although never exceeding 256 Gbits of onboard memory for both cases that have been considered, assuming the availability of a polar ground station for EOSS data downlink. System architects can use the proposed methodology to identify optimal EOSS constellations for a given service pricing strategy and customer target, thus identifying alternatives for selection by decision makers.

  16. 40 CFR 258.51 - Ground-water monitoring systems.

    Science.gov (United States)

    2010-07-01

    ... preclude installation of ground-water monitoring wells at the relevant point of compliance at existing... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Ground-water monitoring systems. 258... CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Ground-Water Monitoring and Corrective Action § 258.51...

  17. Speech Recognition System Architecture for Gujarati Language

    National Research Council Canada - National Science Library

    Jinal H Tailor; Dipti B Shah

    2016-01-01

    .... To achieve good accuracy and efficiency of Automatic Speech Recognition (ASR) system for Indian Gujarati language is challenging task due to its morphology, language barriers, different dialects, and unavailability of resources...

  18. Systemic Risk and Optimal Regulatory Architecture

    NARCIS (Netherlands)

    Espinosa-Vega, M.A.; Kahn, C.; Matta, R.; Sole, J.

    2011-01-01

    Until the recent financial crisis, the safety and soundness of financial institutions was assessed from the perspective of the individual institution. The financial crisis highlighted the need to take systemic externalities seriously when rethinking prudential oversight and the regulatory architectu

  19. Architecture Of A Identity Based Firewall System

    CERN Document Server

    Stojanovski, Nenad

    2011-01-01

    Classic firewall systems are built to filter traffic based on IP addresses, source and destination ports and protocol types. The modern networks have grown to a level where the possibility for users' mobility is a must. In such networks, modern firewalls may introduce such complexity where administration can become very frustrating since it needs the intervention of a firewall administrator. The solution for this problem is an identity based firewall system. In this paper we will present a new design of a firewall system that uses the user's identity to filter the traffic. In the design phase we will define key points which have to be satisfied as a crucial milestone for the functioning of the whole Identity based firewall system.

  20. Agents in an Integrated System Architecture

    DEFF Research Database (Denmark)

    Hartvig, Susanne C; Andersen, Tom

    1997-01-01

    This paper presents research findings from development of an expert system and its integration into an integrated environment. Expert systems has proven hard to integrate because of their interactive nature. A prototype environment was developed using new integration technologies, and research...... findings concerning the use of OLE technology to integrate stand alone applications are discussed. The prototype shows clear advantages of using OLE technology when developing integrated environments....

  1. A fraud management system architecture for next-generation networks.

    Science.gov (United States)

    Bihina Bella, M A; Eloff, J H P; Olivier, M S

    2009-03-10

    This paper proposes an original architecture for a fraud management system (FMS) for convergent. Next-generation networks (NGNs), which are based on the Internet protocol (IP). The architecture has the potential to satisfy the requirements of flexibility and application-independency for effective fraud detection in NGNs that cannot be met by traditional FMSs. The proposed architecture has a thorough four-stage detection process that analyses billing records in IP detail record (IPDR) format - an emerging IP-based billing standard - for signs of fraud. Its key feature is its usage of neural networks in the form of self-organising maps (SOMs) to help uncover unknown NGN fraud scenarios. A prototype was implemented to test the effectiveness of using a SOM for fraud detection and is also described in the paper.

  2. Web Based System Architecture for Long Pulse Remote Experimentation

    Energy Technology Data Exchange (ETDEWEB)

    De Las Heras, E.; Lastra, D. [INDRA Sistemas, S.A., Unidad de Sistemas de Control, Madrid (Spain); Vega, J.; Castro, R. [Association Euratom CIEMAT for Fusion, Madrid (Spain); Ruiz, M.; Barrera, E. [Universidad Politecnica de Madrid (Spain)

    2009-07-01

    INDRA is the first Information Technology company in Spain and it presents here, through a series of transparencies, its own approach for the remote experimentation architecture for long pulses (REAL). All the architecture is based on Java-2 platform standards and REAL is a totally open architecture. By itself REAL offers significant advantages: -) access authentication and authorization under multiple security implementations, -) local or remote network access: LAN, WAN, VPN..., -) on-line access to acquisition systems for monitoring and configuration, -) scalability, flexibility, robustness, platform independence,.... The BeansNet implementation of REAL gives additional good things such as: -) easy implementation, -) graphical tool for service composition and configuration, -) availability and hot-swap (no need of stopping or restarting services after update or remodeling, and -) INDRA support. The implementation of BeansNet at the TJ-2 stellarator at Ciemat is presented. This document is made of the presentation transparencies. (A.C.)

  3. An Optimal Controller Architecture for Poset-Causal Systems

    CERN Document Server

    Shah, Parikshit

    2011-01-01

    We propose a novel and natural architecture for decentralized control that is applicable whenever the underlying system has the structure of a partially ordered set (poset). This controller architecture is based on the concept of Moebius inversion for posets, and enjoys simple and appealing separation properties, since the closed-loop dynamics can be analyzed in terms of decoupled subsystems. The controller structure provides rich and interesting connections between concepts from order theory such as Moebius inversion and control-theoretic concepts such as state prediction, correction, and separability. In addition, using our earlier results on H_2-optimal decentralized control for arbitrary posets, we prove that the H_2-optimal controller in fact possesses the proposed structure, thereby establishing the optimality of the new controller architecture.

  4. ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM

    Directory of Open Access Journals (Sweden)

    N. E. Filyukov

    2014-09-01

    Full Text Available The paper deals with design of a web-based system for Computer-Aided Manufacturing (CAM. Remote applications and databases located in the "private cloud" are proposed to be the basis of such system. The suggested approach contains: service - oriented architecture, using web applications and web services as modules, multi-agent technologies for implementation of information exchange functions between the components of the system and the usage of PDM - system for managing technology projects within the CAM. The proposed architecture involves CAM conversion into the corporate information system that will provide coordinated functioning of subsystems based on a common information space, as well as parallelize collective work on technology projects and be able to provide effective control of production planning. A system has been developed within this architecture which gives the possibility for a rather simple technological subsystems connect to the system and implementation of their interaction. The system makes it possible to produce CAM configuration for a particular company on the set of developed subsystems and databases specifying appropriate access rights for employees of the company. The proposed approach simplifies maintenance of software and information support for CAM subsystems due to their central location in the data center. The results can be used as a basis for CAM design and testing within the learning process for development and modernization of the system algorithms, and then can be tested in the extended enterprise.

  5. Water Recovery System Architecture and Operational Concepts to Accommodate Dormancy

    Science.gov (United States)

    Carter, Layne; Tabb, David; Anderson, Molly

    2017-01-01

    Future manned missions beyond low Earth orbit will include intermittent periods of extended dormancy. The mission requirement includes the capability for life support systems to support crew activity, followed by a dormant period of up to one year, and subsequently for the life support systems to come back online for additional crewed missions. NASA personnel are evaluating the architecture and operational concepts that will allow the Water Recovery System (WRS) to support such a mission. Dormancy could be a critical issue due to concerns with microbial growth or chemical degradation that might prevent water systems from operating properly when the crewed mission began. As such, it is critical that the water systems be designed to accommodate this dormant period. This paper identifies dormancy issues, concepts for updating the WRS architecture and operational concepts that will enable the WRS to support the dormancy requirement.

  6. The architecture of the High Performance Storage System (HPSS)

    Energy Technology Data Exchange (ETDEWEB)

    Teaff, D.; Coyne, B. [IBM Federal, Houston, TX (United States); Watson, D. [Lawrence Livermore National Lab., CA (United States)

    1995-01-01

    The rapid growth in the size of datasets has caused a serious imbalance in I/O and storage system performance and functionality relative to application requirements and the capabilities of other system components. The High Performance Storage System (HPSS) is a scalable, next-generation storage system that will meet the functionality and performance requirements of large-scale scientific and commercial computing environments. Our goal is to improve the performance and capacity of storage systems by two orders of magnitude or more over what is available in the general or mass marketplace today. We are also providing corresponding improvements in architecture and functionality. This paper describes the architecture and functionality of HPSS.

  7. A Secure System Architecture for Measuring Instruments in Legal Metrology

    Directory of Open Access Journals (Sweden)

    Daniel Peters

    2015-03-01

    Full Text Available Embedded systems show the tendency of becoming more and more connected. This fact combined with the trend towards the Internet of Things, from which measuring instruments are not immune (e.g., smart meters, lets one assume that security in measuring instruments will inevitably play an important role soon. Additionally, measuring instruments have adopted general-purpose operating systems to offer the user a broader functionality that is not necessarily restricted towards measurement alone. In this paper, a flexible software system architecture is presented that addresses these challenges within the framework of essential requirements laid down in the Measuring Instruments Directive of the European Union. This system architecture tries to eliminate the risks general-purpose operating systems have by wrapping them, together with dedicated applications, in secure sandboxes, while supervising the communication between the essential parts and the outside world.

  8. Discrete optimization in architecture extremely modular systems

    CERN Document Server

    Zawidzki, Machi

    2017-01-01

    This book is comprised of two parts, both of which explore modular systems: Pipe-Z (PZ) and Truss-Z (TZ), respectively. It presents several methods of creating PZ and TZ structures subjected to discrete optimization. The algorithms presented employ graph-theoretic and heuristic methods. The underlying idea of both systems is to create free-form structures using the minimal number of types of modular elements. PZ is more conceptual, as it forms single-branch mathematical knots with a single type of module. Conversely, TZ is a skeletal system for creating free-form pedestrian ramps and ramp networks among any number of terminals in space. In physical space, TZ uses two types of modules that are mirror reflections of each other. The optimization criteria discussed include: the minimal number of units, maximal adherence to the given guide paths, etc.

  9. Trust-based information system architecture for personal wellness.

    Science.gov (United States)

    Ruotsalainen, Pekka; Nykänen, Pirkko; Seppälä, Antto; Blobel, Bernd

    2014-01-01

    Modern eHealth, ubiquitous health and personal wellness systems take place in an unsecure and ubiquitous information space where no predefined trust occurs. This paper presents novel information model and an architecture for trust based privacy management of personal health and wellness information in ubiquitous environment. The architecture enables a person to calculate a dynamic and context-aware trust value for each service provider, and using it to design personal privacy policies for trustworthy use of health and wellness services. For trust calculation a novel set of measurable context-aware and health information-sensitive attributes is developed. The architecture enables a person to manage his or her privacy in ubiquitous environment by formulating context-aware and service provider specific policies. Focus groups and information modelling was used for developing a wellness information model. System analysis method based on sequential steps that enable to combine results of analysis of privacy and trust concerns and the selection of trust and privacy services was used for development of the information system architecture. Its services (e.g. trust calculation, decision support, policy management and policy binding services) and developed attributes enable a person to define situation-aware policies that regulate the way his or her wellness and health information is processed.

  10. A Novel Home Energy Management System Architecture

    DEFF Research Database (Denmark)

    Rossello Busquet, Ana; Soler, José; Dittmann, Lars

    2011-01-01

    The number of electronic devices found in home environments is increasing, leading to an increase in the energy consumption in users’ premises. Introducing a Home Energy Management System (HEMS) into user residences might provide the necessary tools to reduce and optimize the energy consumption...... the different devices at the service level and provides the necessary tools to apply energy management strategies....

  11. Space-Based Solar Power System Architecture

    Science.gov (United States)

    2012-12-01

    Panel 100,000,000 kg Power Storage 176,000 kg Diode- pumped Laser Transmitter 5,000,000 kg TOTAL SYSTEM WEIGHT 105,181,400 kg 73 deployed...64 a. Power Storage Requirements .................................................65 b. Energy Transfer...alternatives to fossil fuels: nuclear fission reactors, hydroelectric power, wind turbines and solar power to name just a few. Each has advantages

  12. Control Architecture Modeling for Future Power Systems

    DEFF Research Database (Denmark)

    Heussen, Kai

    and operation structures; and finally the application to some concrete study cases, including a present system balancing, and proposed control structures such as Microgrids and Cells. In the second part, the main contributions are the outline of a formation strategy, integrating the design and model...

  13. Advances in Orion's On-Orbit Guidance and Targeting System Architecture

    Science.gov (United States)

    Scarritt, Sara K.; Fill, Thomas; Robinson, Shane

    2015-01-01

    NASA's manned spaceflight programs have a rich history of advancing onboard guidance and targeting technology. In order to support future missions, the guidance and targeting architecture for the Orion Multi-Purpose Crew Vehicle must be able to operate in complete autonomy, without any support from the ground. Orion's guidance and targeting system must be sufficiently flexible to easily adapt to a wide array of undecided future missions, yet also not cause an undue computational burden on the flight computer. This presents a unique design challenge from the perspective of both algorithm development and system architecture construction. The present work shows how Orion's guidance and targeting system addresses these challenges. On the algorithm side, the system advances the state-of-the-art by: (1) steering burns with a simple closed-loop guidance strategy based on Shuttle heritage, and (2) planning maneuvers with a cutting-edge two-level targeting routine. These algorithms are then placed into an architecture designed to leverage the advantages of each and ensure that they function in concert with one another. The resulting system is characterized by modularity and simplicity. As such, it is adaptable to the on-orbit phases of any future mission that Orion may attempt.

  14. PBSNG—Batch System for Farm Architecture

    Institute of Scientific and Technical Information of China (English)

    J.Fromm; K.Genser; 等

    2001-01-01

    FBSNG [1] is a redesigned version of Farm Batch System (FBS[1]),which was developed as a batch process management system for off-line Run II data processing at FNAL.FBSNG is designed for UNIX computer farms and is capable of managing up to 1000 nodes in a single farm.FBSNG allows users to start arrays of parallel processes on one or more farm computers,It uses a simplified abstract resource counting method for load balancing between computers.The resource counting approach allows FBSNG to be a simple and flexible tool for farm resource management.FBSNG scheduler features include guaranteed and controllable” fair-share” scheduling.FBSNG is easily portable across different flavors of UNIX.The system has been successfully used at Fermilab as well as by off-site collaborators for several years on farms of different sizes and different platforms for off-line data processing,Monte-Carlo data generation and other tasks.

  15. Rethinking Enterprise Architecture for Sustainable Energy System Development

    Institute of Scientific and Technical Information of China (English)

    Jovita Vasauskaite; Asif Qumer Gill

    2015-01-01

    Abstract-The development of a sustainable energy system throughout an enterprise is a complex task, which requires an agile holistic approach. Such an approach needs to include a variety of objectives including energy strategy formation and strategic decision-making, which are directly related to the analysis and management of the main areas of sustainable development: The economic, technological, environmental, and social. These multidimensional requirements of sustainability are often difficult to achieve within the enterprise, because these aspects are interrelated and influenced by various internal and external environment factors. This paper first reviews the main challenges for an energy system, and then demonstrates how a strategic agile enterprise architecture driven approach could effectively guide the sustainable energy system development. The study presented in this paper provides a holistic approach that contributes to the advancement and usage of literature dealing with issues of sustainable energy system development and agile enterprise architecture, which has not been discussed before to any great extent.

  16. A Proposed Information Architecture for Telehealth System Interoperability

    Energy Technology Data Exchange (ETDEWEB)

    Craft, R.L.; Funkhouser, D.R.; Gallagher, L.K.; Garica, R.J.; Parks, R.C.; Warren, S.

    1999-04-20

    We propose an object-oriented information architecture for telemedicine systems that promotes secure `plug-and-play' interaction between system components through standardized interfaces, communication protocols, messaging formats, and data definitions. In this architecture, each component functions as a black box, and components plug together in a ''lego-like'' fashion to achieve the desired device or system functionality. Introduction Telemedicine systems today rely increasingly on distributed, collaborative information technology during the care delivery process. While these leading-edge systems are bellwethers for highly advanced telemedicine, most are custom-designed and do not interoperate with other commercial offerings. Users are limited to a set of functionality that a single vendor provides and must often pay high prices to obtain this functionality, since vendors in this marketplace must deliver en- tire systems in order to compete. Besides increasing corporate research and development costs, this inhibits the ability of the user to make intelligent purchasing decisions regarding best-of-breed technologies. This paper proposes a reference architecture for plug-and-play telemedicine systems that addresses these issues.

  17. A Proposed Information Architecture for Telehealth System Interoperability

    Energy Technology Data Exchange (ETDEWEB)

    Warren, S.; Craft, R.L.; Parks, R.C.; Gallagher, L.K.; Garcia, R.J.; Funkhouser, D.R.

    1999-04-07

    Telemedicine technology is rapidly evolving. Whereas early telemedicine consultations relied primarily on video conferencing, consultations today may utilize video conferencing, medical peripherals, store-and-forward capabilities, electronic patient record management software, and/or a host of other emerging technologies. These remote care systems rely increasingly on distributed, collaborative information technology during the care delivery process, in its many forms. While these leading-edge systems are bellwethers for highly advanced telemedicine, the remote care market today is still immature. Most telemedicine systems are custom-designed and do not interoperate with other commercial offerings. Users are limited to a set of functionality that a single vendor provides and must often pay high prices to obtain this functionality, since vendors in this marketplace must deliver entire systems in order to compete. Besides increasing corporate research and development costs, this inhibits the ability of the user to make intelligent purchasing decisions regarding best-of-breed technologies. We propose a secure, object-oriented information architecture for telemedicine systems that promotes plug-and-play interaction between system components through standardized interfaces, communication protocols, messaging formats, and data definitions. In this architecture, each component functions as a black box, and components plug together in a lego-like fashion to achieve the desired device or system functionality. The architecture will support various ongoing standards work in the medical device arena.

  18. System Architecture Modeling for Technology Portfolio Management using ATLAS

    Science.gov (United States)

    Thompson, Robert W.; O'Neil, Daniel A.

    2006-01-01

    Strategic planners and technology portfolio managers have traditionally relied on consensus-based tools, such as Analytical Hierarchy Process (AHP) and Quality Function Deployment (QFD) in planning the funding of technology development. While useful to a certain extent, these tools are limited in the ability to fully quantify the impact of a technology choice on system mass, system reliability, project schedule, and lifecycle cost. The Advanced Technology Lifecycle Analysis System (ATLAS) aims to provide strategic planners a decision support tool for analyzing technology selections within a Space Exploration Architecture (SEA). Using ATLAS, strategic planners can select physics-based system models from a library, configure the systems with technologies and performance parameters, and plan the deployment of a SEA. Key parameters for current and future technologies have been collected from subject-matter experts and other documented sources in the Technology Tool Box (TTB). ATLAS can be used to compare the technical feasibility and economic viability of a set of technology choices for one SEA, and compare it against another set of technology choices or another SEA. System architecture modeling in ATLAS is a multi-step process. First, the modeler defines the system level requirements. Second, the modeler identifies technologies of interest whose impact on an SEA. Third, the system modeling team creates models of architecture elements (e.g. launch vehicles, in-space transfer vehicles, crew vehicles) if they are not already in the model library. Finally, the architecture modeler develops a script for the ATLAS tool to run, and the results for comparison are generated.

  19. Architecture for Combined Energy and Attitude Control System

    OpenAIRE

    Ibrahim M. Mehedi; Renuganth Varatharajoo; Harlisya Harun; Mohd N. Filipski

    2005-01-01

    Combining the energy and attitude control system is a feasible technology for small satellites to improve the space missions. In this Combined Energy and Attitude Control System (CEACS) a double rotating flywheel is used to replace the conventional battery for energy storage as well as to control the attitude of an earth oriented satellite. Each flywheel is to be controlled in the torque mode. The energy and attitude inputs for the flywheels' control architecture are also ...

  20. Robotic control architecture development for automated nuclear material handling systems

    Energy Technology Data Exchange (ETDEWEB)

    Merrill, R.D.; Hurd, R.; Couture, S.; Wilhelmsen, K.

    1995-02-01

    Lawrence Livermore National Laboratory (LLNL) is engaged in developing automated systems for handling materials for mixed waste treatment, nuclear pyrochemical processing, and weapon components disassembly. In support of these application areas there is an extensive robotic development program. This paper will describe the portion of this effort at LLNL devoted to control system architecture development, and review two applications currently being implemented which incorporate these technologies.

  1. Architectural Analysis of a LLNL LWIR Sensor System

    Energy Technology Data Exchange (ETDEWEB)

    Bond, Essex J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Curry, Jim R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); LaFortune, Kai N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Williams, Alicia M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-11-26

    The architecture of an LLNL airborne imaging and detection system is considered in this report. The purpose of the system is to find the location of substances of interest by detecting their chemical signatures using a long-wave infrared (LWIR) imager with geo-registration capability. The detection system consists of an LWIR imaging spectrometer as well as a network of computer hardware and analysis software for analyzing the images for the features of interest. The system has been in the operations phase now for well over a year, and as such, there is enough use data and feedback from the primary beneficiary to assess the current successes and shortcomings of the LWIR system architecture. LWIR system has been successful in providing reliable data collection and the delivery of a report with results. The weakness of the architecture has been identified in two areas: with the network of computer hardware and software and with the feedback of the state of the system health. Regarding the former, the system computers and software that carry out the data acquisition are too complicated for routine operations and maintenance. With respect to the latter, the primary beneficiary of the instrument’s data does not have enough metrics to use to filter the large quantity of data to determine its utility. In addition to the needs in these two areas, a latent need of one of the stakeholders is identified. This report documents the strengths and weaknesses, as well as proposes a solution for enhancing the architecture that simultaneously addresses the two areas of weakness and leverages them to meet the newly identified latent need.

  2. Toward autonomous driving: The CMU Navlab. II - Architecture and systems

    Science.gov (United States)

    Thorpe, Charles; Hebert, Martial; Kanade, Takeo; Shafer, Steven

    1991-01-01

    A description is given of EDDIE, the architecture for the Navlab mobile robot which provides a toolkit for building specific systems quickly and easily. Included in the discussion are the annotated maps used by EDDIE and the Navlab's road-following system, called the Autonomous Mail Vehicle, which was built using EDDIE and its annotated maps as a basis. The contributions of the Navlab project and the lessons learned from it are examined.

  3. Flexible Architecture for FPGAs in Embedded Systems

    Science.gov (United States)

    Clark, Duane I.; Lim, Chester N.

    2012-01-01

    Commonly, field-programmable gate arrays (FPGAs) being developed in cPCI embedded systems include the bus interface in the FPGA. This complicates the development because the interface is complicated and requires a lot of development time and FPGA resources. In addition, flight qualification requires a substantial amount of time be devoted to just this interface. Another complication of putting the cPCI interface into the FPGA being developed is that configuration information loaded into the device by the cPCI microprocessor is lost when a new bit file is loaded, requiring cumbersome operations to return the system to an operational state. Finally, SRAM-based FPGAs are typically programmed via specialized cables and software, with programming files being loaded either directly into the FPGA, or into PROM devices. This can be cumbersome when doing FPGA development in an embedded environment, and does not have an easy path to flight. Currently, FPGAs used in space applications are usually programmed via multiple space-qualified PROM devices that are physically large and require extra circuitry (typically including a separate one-time programmable FPGA) to enable them to be used for this application. This technology adds a cPCI interface device with a simple, flexible, high-performance backend interface supporting multiple backend FPGAs. It includes a mechanism for programming the FPGAs directly via the microprocessor in the embedded system, eliminating specialized hardware, software, and PROM devices and their associated circuitry. It has a direct path to flight, and no extra hardware and minimal software are required to support reprogramming in flight. The device added is currently a small FPGA, but an advantage of this technology is that the design of the device does not change, regardless of the application in which it is being used. This means that it needs to be qualified for flight only once, and is suitable for one-time programmable devices or an application

  4. Generic architecture for a management system of ASON

    Science.gov (United States)

    Tian, Guang-Li; Li, Guangcheng

    2005-02-01

    An ASTN (Automatic Switched Transport Network) enhances the traditional transport network by a control plane. The control plane implements signalling and routing mechanisms that allow the automatic configuration of end-to-end connections on client requests. Consequently the management of ASTNs requires integrated management of the control plane layer and the underlying transport network. This article describes a generic architecture for ASON management systems tuned to this requirement. The centre piece of this architecture is a generic CORBA network level interface which allows an easy integration of several layer networks and different administrative domains. In order to evaluate this architecture it will be implemented for an IP over ASON (Automatic Switched Optical Network) field trial developed within the Fiberhome Telecommunication Technologies. The ASON management system is designed for a multi-vendor, multi-technology, and multi-domain environment. This contribution gives a description of the architectural concepts used, the existing frameworks adopted, the design of the network level interface, and experiences made during implementation of the concepts for the Fiberhome Telecommunication Technologies field trial.

  5. Comparison of Communication Architectures for Spacecraft Modular Avionics Systems

    Science.gov (United States)

    Gwaltney, D. A.; Briscoe, J. M.

    2006-01-01

    This document is a survey of publicly available information concerning serial communication architectures used, or proposed to be used, in aeronautic and aerospace applications. It focuses on serial communication architectures that are suitable for low-latency or real-time communication between physically distributed nodes in a system. Candidates for the study have either extensive deployment in the field, or appear to be viable for near-term deployment. Eleven different serial communication architectures are considered, and a brief description of each is given with the salient features summarized in a table in appendix A. This survey is a product of the Propulsion High Impact Avionics Technology (PHIAT) Project at NASA Marshall Space Flight Center (MSFC). PHIAT was originally funded under the Next Generation Launch Technology (NGLT) Program to develop avionics technologies for control of next generation reusable rocket engines. After the announcement of the Space Exploration Initiative, the scope of the project was expanded to include vehicle systems control for human and robotics missions. As such, a section is included presenting the rationale used for selection of a time-triggered architecture for implementation of the avionics demonstration hardware developed by the project team

  6. Next Generation Image-Based Phenotyping of Root System Architecture

    Science.gov (United States)

    Davis, T. W.; Shaw, N. M.; Cheng, H.; Larson, B. G.; Craft, E. J.; Shaff, J. E.; Schneider, D. J.; Piñeros, M. A.; Kochian, L. V.

    2016-12-01

    The development of the Plant Root Imaging and Data Acquisition (PRIDA) hardware/software system enables researchers to collect digital images, along with all the relevant experimental details, of a range of hydroponically grown agricultural crop roots for 2D and 3D trait analysis. Previous efforts of image-based root phenotyping focused on young cereals, such as rice; however, there is a growing need to measure both older and larger root systems, such as those of maize and sorghum, to improve our understanding of the underlying genetics that control favorable rooting traits for plant breeding programs to combat the agricultural risks presented by climate change. Therefore, a larger imaging apparatus has been prototyped for capturing 3D root architecture with an adaptive control system and innovative plant root growth media that retains three-dimensional root architectural features. New publicly available multi-platform software has been released with considerations for both high throughput (e.g., 3D imaging of a single root system in under ten minutes) and high portability (e.g., support for the Raspberry Pi computer). The software features unified data collection, management, exploration and preservation for continued trait and genetics analysis of root system architecture. The new system makes data acquisition efficient and includes features that address the needs of researchers and technicians, such as reduced imaging time, semi-automated camera calibration with uncertainty characterization, and safe storage of the critical experimental data.

  7. An Architecture for Context-Aware Knowledge Flow Management Systems

    CERN Document Server

    Jarrahi, Ali

    2012-01-01

    The organizational knowledge is one of the most important and valuable assets of organizations. In such environment, organizations with broad, specialized and up-to-date knowledge, adequately using knowledge resources, will be more successful than their competitors. For effective use of knowledge, dynamic knowledge flow from the sources to destinations is essential. In this regard, a novel complex concept in knowledge management is the analysis, design and implementation of knowledge flow management systems. One of the major challenges in such systems is to explore the knowledge flow from the source to the recipient and control the flow for quality improvements concerning the users' needs as possible. Therefore, the purpose of this paper is to provide an architecture in order to solve this challenge. For this purpose, in addition to the architecture for knowledge flow management systems, a new node selection strategy is provided with higher success rate compared to previous strategies.

  8. Integrating Environmental and Information Systems Management: An Enterprise Architecture Approach

    Science.gov (United States)

    Noran, Ovidiu

    Environmental responsibility is fast becoming an important aspect of strategic management as the reality of climate change settles in and relevant regulations are expected to tighten significantly in the near future. Many businesses react to this challenge by implementing environmental reporting and management systems. However, the environmental initiative is often not properly integrated in the overall business strategy and its information system (IS) and as a result the management does not have timely access to (appropriately aggregated) environmental information. This chapter argues for the benefit of integrating the environmental management (EM) project into the ongoing enterprise architecture (EA) initiative present in all successful companies. This is done by demonstrating how a reference architecture framework and a meta-methodology using EA artefacts can be used to co-design the EM system, the organisation and its IS in order to achieve a much needed synergy.

  9. Reconfigurable architecture for MIMO systems based on CORDIC operators

    Science.gov (United States)

    Wang, Hongzhi; Leray, Pierre; Palicot, Jacques

    2006-09-01

    The MIMO system is an attractive technology for wireless 3G/4G systems. In this article we propose the realization on FPGA of a MIMO 'V-BLAST Square Root' algorithm based on a variable number of CORDIC operators. The CORDIC operator is highly suitable for this implementation as it only relies on simple techniques of addition and vector offsets. This square root algorithm architecture is reconfigurable in order to adapt itself to different numbers of antennas and different data rates. The proposed architecture can achieve a data rate of 600 Mbit/s in a Virtex-II FPGA circuit from Xilinx for the MIMO system with QPSK modulation. To cite this article: H. Wang et al., C. R. Physique 7 (2006).

  10. Service-Oriented Architecture for Space Exploration Robotic Rover Systems

    CERN Document Server

    Bassil, Youssef

    2012-01-01

    Currently, industrial sectors are transforming their business processes into e-services and component-based architectures to build flexible, robust, and scalable systems, and reduce integration-related maintenance and development costs. Robotics is yet another promising and fast-growing industry that deals with the creation of machines that operate in an autonomous fashion and serve for various applications including space exploration, weaponry, laboratory research, and manufacturing. It is in space exploration that the most common type of robots is the planetary rover which moves across the surface of a planet and conducts a thorough geological study of the celestial surface. This type of rover system is still ad-hoc in that it incorporates its software into its core hardware making the whole system cohesive, tightly-coupled, more susceptible to shortcomings, less flexible, hard to be scaled and maintained, and impossible to be adapted to other purposes. This paper proposes a service-oriented architecture fo...

  11. Influence of Holocene stratigraphic architecture on ground surface settlements: A case study from the City of Pisa (Tuscany, Italy)

    Science.gov (United States)

    Sarti, Giovanni; Rossi, Veronica; Amorosi, Alessandro

    2012-12-01

    The Holocene stratigraphic architecture of modern coastal and deltaic plains has peculiar characteristics that may influence ground surface settlements. In the Pisa urban area, the inhomogeneous spatial distribution of geotechnically weak layers, typically formed during the mid-late Holocene (highstand) coastal progradation, is inferred to be responsible for urban ground settlement and building damage, as evidenced by the tilt of several surface structures, among which the famous Leaning Tower of Pisa is the most prominent. On the basis of integrated stratigraphic, sedimentological and geotechnical data from a wide georeferenced database, three facies associations with high deformability potential (Units 1-3) are identified in the uppermost 30 m as opposed to depositional facies (Units 4-5) with higher geotechnical strength. Whereas Unit 1 represents a thick, laterally extensive lagoonal clay deposit, the overlying highly deformable units (Units 2-3) show more discontinuous spatial distribution controlled by the Holocene paleohydrographic evolution of the Arno coastal plain. Unit 2, dated between the Neolithic and the Etruscan age (ca. 5000-2000 yr BP), is composed of swamp clays and silty clays recording lagoon infilling due to Arno Delta progradation. Units 3 and 4, which consist of wet levee deposits and stiff floodplain clays, respectively, formed during the subsequent phases of alluvial plain construction started around the Roman age (from ca. 2000 yr BP). Whereas Units 3 and 4 are recorded within the uppermost 5 m, fluvial and distributary channel sands (Unit 5) cut the underlying deltaic-alluvial succession at various stratigraphic levels, down to Unit 1. The spatial distribution of these units gives rise to three, locally juxtaposed, stratigraphic motifs in Pisa underground, reflecting different potential risks for settlement under building loads. We show how lateral changes in stratigraphic architecture account for the irregular spatial distribution of

  12. Software Defined Radios - Architectures, Systems and Functions

    Science.gov (United States)

    Sims, Herb

    2017-01-01

    Software Defined Radio is an industry term describing a method of utilizing a minimum amount of Radio Frequency (RF)/analog electronics before digitization takes place. Upon digitization all other functions are performed in software/firmware. There are as many different types of SDRs as there are data systems. Software Defined Radio (SDR) technology has been proven in the commercial sector since the early 90's. Today's rapid advancement in mobile telephone reliability and power management capabilities exemplifies the effectiveness of the SDR technology for the modern communications market. In contrast the foundations of transponder technology presently qualified for satellite applications were developed during the early space program of the 1960's. SDR technology offers potential to revolutionize satellite transponder technology by increasing science data through-put capability by at least an order of magnitude. While the SDR is adaptive in nature and is "One-size-fits-all" by design, conventional transponders are built to a specific platform and must be redesigned for every new bus. The SDR uses a minimum amount of analog/Radio Frequency components to up/down-convert the RF signal to/from a digital format. Once analog data is digitized, all processing is performed using hardware logic. Typical SDR processes include; filtering, modulation, up/down converting and demodulation. This presentation will show how the emerging SDR market has leveraged the existing commercial sector to provide a path to a radiation tolerant SDR transponder. These innovations will reduce the cost of transceivers, a decrease in power requirements and a commensurate reduction in volume. A second pay-off is the increased flexibility of the SDR by allowing the same hardware to implement multiple transponder types by altering hardware logic - no change of analog hardware is required - all of which can be ultimately accomplished in orbit. This in turn would provide high capability and low cost

  13. Fault tolerant hypercube computer system architecture

    Science.gov (United States)

    Madan, Herb S. (Inventor); Chow, Edward (Inventor)

    1989-01-01

    A fault-tolerant multiprocessor computer system of the hypercube type comprising a hierarchy of computers of like kind which can be functionally substituted for one another as necessary is disclosed. Communication between the working nodes is via one communications network while communications between the working nodes and watch dog nodes and load balancing nodes higher in the structure is via another communications network separate from the first. A typical branch of the hierarchy reporting to a master node or host computer comprises, a plurality of first computing nodes; a first network of message conducting paths for interconnecting the first computing nodes as a hypercube. The first network provides a path for message transfer between the first computing nodes; a first watch dog node; and a second network of message connecting paths for connecting the first computing nodes to the first watch dog node independent from the first network, the second network provides an independent path for test message and reconfiguration affecting transfers between the first computing nodes and the first switch watch dog node. There is additionally, a plurality of second computing nodes; a third network of message conducting paths for interconnecting the second computing nodes as a hypercube. The third network provides a path for message transfer between the second computing nodes; a fourth network of message conducting paths for connecting the second computing nodes to the first watch dog node independent from the third network. The fourth network provides an independent path for test message and reconfiguration affecting transfers between the second computing nodes and the first watch dog node; and a first multiplexer disposed between the first watch dog node and the second and fourth networks for allowing the first watch dog node to selectively communicate with individual ones of the computing nodes through the second and fourth networks; as well as, a second watch dog node

  14. New optical architecture for holographic data storage system compatible with Blu-ray Disc™ system

    Science.gov (United States)

    Shimada, Ken-ichi; Ide, Tatsuro; Shimano, Takeshi; Anderson, Ken; Curtis, Kevin

    2014-02-01

    A new optical architecture for holographic data storage system which is compatible with a Blu-ray Disc™ (BD) system is proposed. In the architecture, both signal and reference beams pass through a single objective lens with numerical aperture (NA) 0.85 for realizing angularly multiplexed recording. The geometry of the architecture brings a high affinity with an optical architecture in the BD system because the objective lens can be placed parallel to a holographic medium. Through the comparison of experimental results with theory, the validity of the optical architecture was verified and demonstrated that the conventional objective lens motion technique in the BD system is available for angularly multiplexed recording. The test-bed composed of a blue laser system and an objective lens of the NA 0.85 was designed. The feasibility of its compatibility with BD is examined through the designed test-bed.

  15. Reconfigurable Hardware Architecture for Network Intrusion Detection System

    Directory of Open Access Journals (Sweden)

    A. Kaleel Rahuman

    2012-01-01

    Full Text Available Intrusion rule processing in reconfigurable hardware enables intrusion detection and prevention. The use of reconfigurable hardware for network security applications has great strides as Field Programmable Gate Array (FPGA devices have provided larger and faster resources. This proposes architecture called “BV-TCAM” is presented, which is implemented for an FPGA-based Network Intrusion Detection Systems (NIDS. The BV-TCAM architecture combines the Ternary Content Addressable Memory (TCAM and Bit Vector (BV algorithm to effectively compress the data representation and throughput. A tree bitmap implementation of the BV algorithm is used for source and destination port lookup while a TCAM performs lookup for other header fields, which can be represented as a prefix or exact value. With the aid of small embedded TCAM, packet classification can be implemented in relatively small part of the available logic of an FPGA. The BV-TCAM architecture has been modelled by VHDL. Simulations were performed by MODELSIM. This architecture have to be synthesized and implement our design using Xilinx FPGA device."

  16. An overview to Software Architecture in Intrusion Detection System

    CERN Document Server

    Bahrami, Mehdi

    2012-01-01

    Network intrusion detection systems provide proactive defense against security threats by detecting and blocking attack-related traffic. This task can be highly complex, and therefore, software based network intrusion detection systems have difficulty in handling high speed links. This paper reviews of many type of software architecture in intrusion detection systems and describes the design and implementation of a high-performance network intrusion detection system that combines the use of software-based network intrusion detection sensors and a network processor board. The network processor acts as a customized load balancing splitter that cooperates with a set of modified content-based network intrusion detection sensors in processing network traffic.

  17. Wireless coordinated multicell systems architectures and precoding designs

    CERN Document Server

    Nguyen, Duy H N

    2014-01-01

    This SpringerBrief discusses the current research on coordinated multipoint transmission/reception (CoMP) in wireless multi-cell systems. This book analyzes the structure of the CoMP precoders and the message exchange mechanism in the CoMP system in order to reveal the advantage of CoMP. Topics include interference management in wireless cellular networks, joint signal processing, interference coordination, uplink and downlink precoding and system models. After an exploration of the motivations and concepts of CoMP, the authors present the architectures of a CoMP system. Practical implementati

  18. Architecture analysis of the simplified libration point satellite navigation system

    Science.gov (United States)

    Zhang, Lei; Xu, Bo

    2016-10-01

    The libration point satellite navigation system is a novel navigation architecture that consists of satellites located in periodic orbits around the Earth-Moon libration points. Superiorities of the proposed system lie in its autonomy and extended navigation capability, which have been proved in our previous works. Based on the candidate architectures obtained before, a detailed analysis of the simplified libration point satellite navigation system, i.e. the Earth-Moon L1,2 two-satellite constellation, is conducted in this work. Firstly, relation between orbits amplitude is derived for the candidate two-satellite constellations to ensure continuous crosslink measurements between libration point satellites. Then, with the use of a reference lunar exploration mission scenario, navigation performances of different constellation configurations are evaluated by Monte-Carlo simulations. The simulation results indicate that the amplitude and initial phase combinations of libration point orbits have direct effect on the performance of the two-satellite constellations. By using a cooperative evolutionary algorithm for configuration parameter optimization, some optimal constellations are finally obtained for the simplified navigation architecture. The results obtained in this paper may be a reference for future system design.

  19. Architecture and performances of the AGILE Telemetry Preprocessing System (TMPPS)

    Science.gov (United States)

    Trifoglio, M.; Bulgarelli, A.; Gianotti, F.; Lazzarotto, F.; Di Cocco, G.; Fuschino, F.; Tavani, M.

    2008-07-01

    AGILE is an Italian Space Agency (ASI) satellite dedicated to high energy Astrophysics. It was launched successfully on 23 April 2007, and it has been operated by the AGILE Ground Segment, consisting of the Ground Station located in Malindi (Kenia), the Mission Operations Centre (MOC) and the AGILE Data Centre (ADC) established in Italy, at Telespazio in Fucino and at the ASI Science Data Centre (ASDC) in Frascati respectively. Due to the low equatorial orbit at ~ 530 Km. with inclination angle of ~ 2.5°, the satellite passes over the Ground Station every ~ 100'. During the visibility period of . ~ 12', the Telemetry (TM) is down linked through two separated virtual channels, VC0 and VC1. The former is devoted to the real time TM generated during the pass at the average rate of 50 Kbit/s and is directly relayed to the Control Centre. The latter is used to downlink TM data collected on the satellite on-board mass memory during the non visibility period. This generates at the Ground Station a raw TM file of up to 37 MByte. Within 20' after the end of the contact, both the real time and mass memory TM arrive at ADC through the dedicated VPN ASINet. Here they are automatically detected and ingested by the TMPPS pipeline in less than 5 minutes. The TMPPS archives each TM file and sorts its packets into one stream for each of the different TM layout. Each stream is processed in parallel in order to unpack the various telemetry field and archive them into suitable FITS files. Each operation is tracked into a MySQL data base which interfaces the TMPPS pipeline to the rest of the scientific pipeline running at ADC. In this paper the architecture and the performance of the TMPPS will be described and discussed.

  20. 46 CFR 169.676 - Grounded electrical systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Grounded electrical systems. 169.676 Section 169.676... Machinery and Electrical Electrical Installations Operating at Potentials of 50 Volts Or More on Vessels of Less Than 100 Gross Tons § 169.676 Grounded electrical systems. (a) Except as provided in paragraph...

  1. The Method Framework for Engineering System Architectures (MFESA)

    Science.gov (United States)

    2016-06-13

    provides the world’s largest free open - source website documenting over 1,100 reusable method components. 3 SEI Webinar Series - MFESA Donald Firesmith...hope!): • Informational website with softcopies of the method components • Free , open - source tool set (Eclipse ?) 18 SEI Webinar Series - MFESA Donald...2009 Carnegie Mellon University The Method Framework for Engineering System Architectures (MFESA) Software Engineering Institute Carnegie Mellon

  2. Understanding Temporal Logic. Introducing Coherent Object System Architecture (COSA)

    Science.gov (United States)

    2010-04-01

    Ru e tep – False Trace – End preemption control loop • a se e av or – Next False Rule/Step – Trace (unique to app ) www.vsmerlot.com 13 COSA Engine...Coherent Object System Architecture – U.S. Patent #6,345,387 abandoned by inventor – Available to the public in book: Breaking the Time Barrier • BNF

  3. Research on Human Sensory Architecture for Cyber Physical Systems

    Directory of Open Access Journals (Sweden)

    Zhejun Kuang

    2013-09-01

    Full Text Available CPS is complex distributed systems, which contain computing, communications, and control. CPS is a product of the combination of physical world and the cyber world. The cyber world needs a lot of physical equipment to deal with perception and communication, then collect and transfer the information in the real environment, and by computation to forecast what might happen in future real environment, at last through the control strategy to achieve the optimal solution. In short, cyber physical system is the complex systems combination with computation system, sensory system and control system. Cyber physical system through more extensive connection, the physical world more thorough cognition, more effectively control the physical world, make the information world and the physical world closer integration, realize coordination awareness and control of the physical world. The paper through the analysis of the human perception system, build a cyber-physical fusion system based on human perception architecture

  4. Research on Human Sensory Architecture for Cyber Physical Systems

    Directory of Open Access Journals (Sweden)

    Zhejun Kuang

    2013-11-01

    Full Text Available CPS is complex distributed systems, which contain computing, communications, and control. CPS is a product of the combination of physical world and the cyber world. The cyber world needs a lot of physical equipment to deal with perception and communication, then collect and transfer the information in the real environment, and by computation to forecast what might happen in future real environment, at last through the control strategy to achieve the optimal solution. In short, cyber physical system is the complex systems combination with computation system, sensory system and control system. Cyber physical system through more extensive connection, the physical world more thorough cognition, more effectively control the physical world, make the information world and the physical world closer integration, realize coordination awareness and control of the physical world. The paper through the analysis of the human perception system, build a cyber-physical fusion system based on human perception architecture

  5. 30 CFR 77.803 - Fail safe ground check circuits on high-voltage resistance grounded systems.

    Science.gov (United States)

    2010-07-01

    ... circuits on high-voltage resistance grounded systems. On and after September 30, 1971, all high-voltage, resistance grounded systems shall include a fail safe ground check circuit or other no less effective device... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fail safe ground check circuits on...

  6. A Multi-Agent System Architecture for Sensor Networks

    Science.gov (United States)

    Fuentes-Fernández, Rubén; Guijarro, María; Pajares, Gonzalo

    2009-01-01

    The design of the control systems for sensor networks presents important challenges. Besides the traditional problems about how to process the sensor data to obtain the target information, engineers need to consider additional aspects such as the heterogeneity and high number of sensors, and the flexibility of these networks regarding topologies and the sensors in them. Although there are partial approaches for resolving these issues, their integration relies on ad hoc solutions requiring important development efforts. In order to provide an effective approach for this integration, this paper proposes an architecture based on the multi-agent system paradigm with a clear separation of concerns. The architecture considers sensors as devices used by an upper layer of manager agents. These agents are able to communicate and negotiate services to achieve the required functionality. Activities are organized according to roles related with the different aspects to integrate, mainly sensor management, data processing, communication and adaptation to changes in the available devices and their capabilities. This organization largely isolates and decouples the data management from the changing network, while encouraging reuse of solutions. The use of the architecture is facilitated by a specific modelling language developed through metamodelling. A case study concerning a generic distributed system for fire fighting illustrates the approach and the comparison with related work. PMID:22303172

  7. NUClear: A Loosely Coupled Software Architecture for Humanoid Robot Systems

    Directory of Open Access Journals (Sweden)

    Trent eHouliston

    2016-04-01

    Full Text Available This paper discusses the design and interface of NUClear, a new hybrid message-passing architecture for embodied humanoid robotics. NUClear is modular, low latency and promotes functional and expandable software design. It greatly reduces the latency for messages passed between modules as the messages routes are established at compile time. It also reduces the number of functions that must be written using a system called co-messages which aids in dealing with multiple simultaneous data. NUClear has primarily been evaluated on a humanoid robotic soccer platform and on a robotic boat platform, with evaluations showing that NUClear requires fewer callbacks and cache variables over existing message-passing architectures. NUClear does have limitations when applying these techniques on multi-processed systems. It performs best in lower power systems where computational resources are limited. Future work will focus on applying the architecture to new platforms, including a larger form humanoid platform and a virtual reality platform and further evaluating the impact of the novel techniques introduced.

  8. e-Learning Management System Using Service Oriented Architecture

    Directory of Open Access Journals (Sweden)

    Mohammed A. Jabr

    2010-01-01

    Full Text Available Problem statement: Service Oriented Architecture (SOA defines how to integrate widely disparate applications for a world that is Web based and uses multiple implementation platforms. Using (SOA one can build durable e-learning contents, regardless of changes or evolutions in technology. This means that new content should be added to existing content without costly redesign, reconfiguration, or recoding. Approach: In this study an e-Learning management system with Web services oriented framework was proposed. The system will be an open source application with client-scripting facility. It also supports the cross browser and it is fully integrated with different databases; MS SQL Server, MS Access, Oracle and LDAP. Results: The key values of Interoperability, durability, compatibility, manageability, dynamic reusability and accessibility in the proposed architecture enhance the future e-Learning systems to communicate more efficiently and share data more easily. Conclusion/Recommendations: Web services architecture will provide a standard based platform for Service-Oriented Computing. It defines itself as a set of specifications that support an open XML-based platform for description, discovery, and interoperability of distributed, heterogeneous applications as services.

  9. A multi-agent system architecture for sensor networks.

    Science.gov (United States)

    Fuentes-Fernández, Rubén; Guijarro, María; Pajares, Gonzalo

    2009-01-01

    The design of the control systems for sensor networks presents important challenges. Besides the traditional problems about how to process the sensor data to obtain the target information, engineers need to consider additional aspects such as the heterogeneity and high number of sensors, and the flexibility of these networks regarding topologies and the sensors in them. Although there are partial approaches for resolving these issues, their integration relies on ad hoc solutions requiring important development efforts. In order to provide an effective approach for this integration, this paper proposes an architecture based on the multi-agent system paradigm with a clear separation of concerns. The architecture considers sensors as devices used by an upper layer of manager agents. These agents are able to communicate and negotiate services to achieve the required functionality. Activities are organized according to roles related with the different aspects to integrate, mainly sensor management, data processing, communication and adaptation to changes in the available devices and their capabilities. This organization largely isolates and decouples the data management from the changing network, while encouraging reuse of solutions. The use of the architecture is facilitated by a specific modelling language developed through metamodelling. A case study concerning a generic distributed system for fire fighting illustrates the approach and the comparison with related work.

  10. A Multi-Agent System Architecture for Sensor Networks

    Directory of Open Access Journals (Sweden)

    María Guijarro

    2009-12-01

    Full Text Available The design of the control systems for sensor networks presents important challenges. Besides the traditional problems about how to process the sensor data to obtain the target information, engineers need to consider additional aspects such as the heterogeneity and high number of sensors, and the flexibility of these networks regarding topologies and the sensors in them. Although there are partial approaches for resolving these issues, their integration relies on ad hoc solutions requiring important development efforts. In order to provide an effective approach for this integration, this paper proposes an architecture based on the multi-agent system paradigm with a clear separation of concerns. The architecture considers sensors as devices used by an upper layer of manager agents. These agents are able to communicate and negotiate services to achieve the required functionality. Activities are organized according to roles related with the different aspects to integrate, mainly sensor management, data processing, communication and adaptation to changes in the available devices and their capabilities. This organization largely isolates and decouples the data management from the changing network, while encouraging reuse of solutions. The use of the architecture is facilitated by a specific modelling language developed through metamodelling. A case study concerning a generic distributed system for fire fighting illustrates the approach and the comparison with related work.

  11. The SKA1 LOW telescope: system architecture and design performance

    Science.gov (United States)

    Waterson, Mark F.; Labate, Maria Grazia; Schnetler, Hermine; Wagg, Jeff; Turner, Wallace; Dewdney, Peter

    2016-07-01

    The SKA1-LOW radio telescope will be a low-frequency (50-350 MHz) aperture array located in Western Australia. Its scientific objectives will prioritize studies of the Epoch of Reionization and pulsar physics. Development of the telescope has been allocated to consortia responsible for the aperture array front end, timing distribution, signal and data transport, correlation and beamforming signal processors, infrastructure, monitor and control systems, and science data processing. This paper will describe the system architectural design and key performance parameters of the telescope and summarize the high-level sub-system designs of the consortia.

  12. Choice Architecture as a Way to Encourage a Whole Systems Design Perspective for More Sustainable Infrastructure

    Directory of Open Access Journals (Sweden)

    Nora Harris

    2016-12-01

    Full Text Available Across fields, more sustainable and resilient outcomes are being realized through a whole systems design perspective, which guides decision-makers to consider the entire system affected including interdependent physical and social networks. Although infrastructure is extremely interdependent, consisting of diverse stakeholders and networks, the infrastructure design and construction process is often fragmented. This fragmentation can result in unnecessary tradeoffs, leading to poor outcomes for certain stakeholders and the surrounding environment. A whole systems design perspective would help connect this fragmented industry and lead to more sustainable outcomes. For example, a whole systems design approach to relieve traffic on a highway might see beyond the obvious, but often ineffective, response of adding a new vehicle lane to encourage a solution such as repurposing existing road lanes from automobiles to above-ground “subway” systems. This paper discusses influences to whole systems design and how intentional choice architecture, meaning the way decisions are posed, can nudge decision-makers to employ whole systems design and result in more sustainable infrastructure. By uncovering these influences and organizing them by the social, organizational, and individual levels of the infrastructure design process, this paper provides the needed foundation for interdisciplinary research to help harness these influences through choice architecture and whole systems design for the infrastructure industry.

  13. Optimising root system hydraulic architectures for water uptake

    Science.gov (United States)

    Meunier, Félicien; Couvreur, Valentin; Draye, Xavier; Javaux, Mathieu

    2015-04-01

    In this study we started from local hydraulic analysis of idealized root systems to develop a mathematical framework necessary for the understanding of global root systems behaviors. The underlying assumption of this study was that the plant is naturally optimised for the water uptake. The root system is thus a pipe network dedicated to the capture and transport of water. The main objective of the present research is to explain the fitness of major types of root architectures to their environment. In a first step, we developed links between local hydraulic properties and macroscopic parameters of (un)branched roots. The outcome of such an approach were functions of apparent conductance of entire root system and uptake distribution along the roots. We compared our development with some allometric scaling laws for the root water uptake: under the same simplifying assumptions we were able to obtain the same results and even to expand them to more physiological cases. Using empirical data of measured root conductance, we were also able to fit extremely well the data-set with this model. In a second stage we used generic architecture parameters and an existent root growth model to generate various types of root systems (from fibrous to tap). We combined both sides (hydraulic and architecture) then to maximize under a volume constraint either apparent conductance of root systems or the soil volume explored by active roots during the plant growth period. This approach has led to the sensitive parameters of the macroscopic parameters (conductance and location of the water uptake) of each single plant selected for this study. Scientific questions such as: "What is the optimal sowing density of a given hydraulic architecture ?" or "Which plant traits can we change to better explore the soil domain ?" can be also addressed with this approach: some potential applications are illustrated. The next (and ultimate phase) will be to validate our conclusions with real architectures

  14. An architecture for agile shop floor control systems

    DEFF Research Database (Denmark)

    Langer, Gilad; Alting, Leo

    2000-01-01

    manufacturing systems to accommodate the increasing dynamic characteristics of the manufacturing environment. Regarding these new concepts, specifically holonic manufacturing systems, there are many aspects that should be considered. One of the aspects is the manufacturing system and its control, commonly known...... as shop floor control. This paper presents the Holonic Multi-cell Control System (HoMuCS) architecture that allows for design and development of holonic shop floor control systems. The HoMuCS is a shop floor control system which is sometimes referred to as a manufacturing execution system......Changes in markets and global business trends affect the manufacturing environment in infinite ways. These changes have brought about the need for a paradigm shift to reassess the manner in which manufacturing systems are developed and operated. New theories and concepts present solutions to enable...

  15. Reliability Architecture for Collaborative Robot Control Systems in Complex Environments

    Directory of Open Access Journals (Sweden)

    Liang Tang

    2016-02-01

    Full Text Available Many different kinds of robot systems have been successfully deployed in complex environments, while research into collaborative control systems between different robots, which can be seen as a hybrid internetware safety-critical system, has become essential. This paper discusses ways to construct robust and secure reliability architecture for collaborative robot control systems in complex environments. First, the indication system for evaluating the realtime reliability of hybrid internetware systems is established. Next, a dynamic collaborative reliability model for components of hybrid internetware systems is proposed. Then, a reliable, adaptive and evolutionary computation method for hybrid internetware systems is proposed, and a timing consistency verification solution for collaborative robot control internetware applications is studied. Finally, a multi-level security model supporting dynamic resource allocation is established.

  16. Multimedia architectures: from desktop systems to portable appliances

    Science.gov (United States)

    Bhaskaran, Vasudev; Konstantinides, Konstantinos; Natarajan, Balas R.

    1997-01-01

    Future desktop and portable computing systems will have as their core an integrated multimedia system. Such a system will seamlessly combine digital video, digital audio, computer animation, text, and graphics. Furthermore, such a system will allow for mixed-media creation, dissemination, and interactive access in real time. Multimedia architectures that need to support these functions have traditionally required special display and processing units for the different media types. This approach tends to be expensive and is inefficient in its use of silicon. Furthermore, such media-specific processing units are unable to cope with the fluid nature of the multimedia market wherein the needs and standards are changing and system manufacturers may demand a single component media engine across a range of products. This constraint has led to a shift towards providing a single-component multimedia specific computing engine that can be integrated easily within desktop systems, tethered consumer appliances, or portable appliances. In this paper, we review some of the recent architectural efforts in developing integrated media systems. We primarily focus on two efforts, namely the evolution of multimedia-capable general purpose processors and a more recent effort in developing single component mixed media co-processors. Design considerations that could facilitate the migration of these technologies to a portable integrated media system also are presented.

  17. Movable Ground Based Recovery System for Reuseable Space Flight Hardware

    Science.gov (United States)

    Sarver, George L. (Inventor)

    2013-01-01

    A reusable space flight launch system is configured to eliminate complex descent and landing systems from the space flight hardware and move them to maneuverable ground based systems. Precision landing of the reusable space flight hardware is enabled using a simple, light weight aerodynamic device on board the flight hardware such as a parachute, and one or more translating ground based vehicles such as a hovercraft that include active speed, orientation and directional control. The ground based vehicle maneuvers itself into position beneath the descending flight hardware, matching its speed and direction and captures the flight hardware. The ground based vehicle will contain propulsion, command and GN&C functionality as well as space flight hardware landing cushioning and retaining hardware. The ground based vehicle propulsion system enables longitudinal and transverse maneuverability independent of its physical heading.

  18. The AI Bus architecture for distributed knowledge-based systems

    Science.gov (United States)

    Schultz, Roger D.; Stobie, Iain

    1991-01-01

    The AI Bus architecture is layered, distributed object oriented framework developed to support the requirements of advanced technology programs for an order of magnitude improvement in software costs. The consequent need for highly autonomous computer systems, adaptable to new technology advances over a long lifespan, led to the design of an open architecture and toolbox for building large scale, robust, production quality systems. The AI Bus accommodates a mix of knowledge based and conventional components, running on heterogeneous, distributed real world and testbed environment. The concepts and design is described of the AI Bus architecture and its current implementation status as a Unix C++ library or reusable objects. Each high level semiautonomous agent process consists of a number of knowledge sources together with interagent communication mechanisms based on shared blackboards and message passing acquaintances. Standard interfaces and protocols are followed for combining and validating subsystems. Dynamic probes or demons provide an event driven means for providing active objects with shared access to resources, and each other, while not violating their security.

  19. Towards an inline reconstruction architecture for micro-CT systems

    Energy Technology Data Exchange (ETDEWEB)

    Brasse, David [Institut de Recherches Subatomiques, IN2P3-CNRS/ULP, Strasbourg (France); Humbert, Bernard [Institut de Recherches Subatomiques, IN2P3-CNRS/ULP, Strasbourg (France); Mathelin, Carole [Institut de genetique et de biologie moleculaire et cellulaire, Illkirch-Graffenstaden (France); Rio, Marie-Christine [Institut de genetique et de biologie moleculaire et cellulaire, Illkirch-Graffenstaden (France); Guyonnet, Jean-Louis [Institut de Recherches Subatomiques, IN2P3-CNRS/ULP, Strasbourg (France)

    2005-12-21

    Recent developments in micro-CT have revolutionized the ability to examine in vivo living experimental animal models such as mouse with a spatial resolution less than 50 {mu}m. The main requirements of in vivo imaging for biological researchers are a good spatial resolution, a low dose induced to the animal during the full examination and a reduced acquisition and reconstruction time for screening purposes. We introduce inline acquisition and reconstruction architecture to obtain in real time the 3D attenuation map of the animal fulfilling the three previous requirements. The micro-CT system is based on commercially available x-ray detector and micro-focus x-ray source. The reconstruction architecture is based on a cluster of PCs where a dedicated communication scheme combining serial and parallel treatments is implemented. In order to obtain high performance transmission rate between the detector and the reconstruction architecture, a dedicated data acquisition system is also developed. With the proposed solution, the time required to filter and backproject a projection of 2048 x 2048 pixels inside a volume of 140 mega voxels using the Feldkamp algorithm is similar to 500 ms, the time needed to acquire the same projection.

  20. An Analysis Architecture for Communications in Multi-agent Systems

    Directory of Open Access Journals (Sweden)

    Celia Gutiérrez

    2013-03-01

    Full Text Available Evaluation tools are significant from the Agent Oriented Software Engineering (AOSE point of view. Defective designs of communications in Multi-agent Systems (MAS may overload one or several agents, causing a bullying effect on them. Bullying communications have avoidable consequences, as high response times and low quality of service (QoS. Architectures that perform evaluation functionality must include features to measure the bullying activity and QoS, but it is also recommendable that they have reusability and scalability features. Evaluation tools with these features can be applied to a wide range of MAS, while minimizing designer’s effort. This work describes the design of an architecture for communication analysis, and its evolution to a modular version, that can be applied to different types of MAS. Experimentation of both versions shows differences between its executions.

  1. VLSI neural system architecture for finite ring recursive reduction.

    Science.gov (United States)

    Zhang, D; Jullien, G A

    1996-12-01

    The use of neural-like networks to implement finite ring computations has been presented in a previous paper. This paper develops efficient VLSI neural system architecture for the finite ring recursive reduction (FRRR), including module reduction, MSB carry iteration and feedforward processing. These techniques deal with the basic principles involved in constructing a FRRR, and their implementations are efficiently matched to the VLSI medium. Compared with the other structure models for finite ring computation (e.g. modification of binary arithmetic logic and bit-steered ROM's), the FRRR structure has the lowest area complexity in silicon while maintaining a high throughput rate. Examples of several implementations are used to illustrate the effectiveness of the FRRR architecture.

  2. A New Indoor Positioning System Architecture Using GPS Signals

    Science.gov (United States)

    Xu, Rui; Chen, Wu; Xu, Ying; Ji, Shengyue

    2015-01-01

    The pseudolite system is a good alternative for indoor positioning systems due to its large coverage area and accurate positioning solution. However, for common Global Positioning System (GPS) receivers, the pseudolite system requires some modifications of the user terminals. To solve the problem, this paper proposes a new pseudolite-based indoor positioning system architecture. The main idea is to receive real-world GPS signals, repeat each satellite signal and transmit those using indoor transmitting antennas. The transmitted GPS-like signal can be processed (signal acquisition and tracking, navigation data decoding) by the general receiver and thus no hardware-level modification on the receiver is required. In addition, all Tx can be synchronized with each other since one single clock is used in Rx/Tx. The proposed system is simulated using a software GPS receiver. The simulation results show the indoor positioning system is able to provide high accurate horizontal positioning in both static and dynamic situations. PMID:25938199

  3. A New Indoor Positioning System Architecture Using GPS Signals.

    Science.gov (United States)

    Xu, Rui; Chen, Wu; Xu, Ying; Ji, Shengyue

    2015-04-29

    The pseudolite system is a good alternative for indoor positioning systems due to its large coverage area and accurate positioning solution. However, for common Global Positioning System (GPS) receivers, the pseudolite system requires some modifications of the user terminals. To solve the problem, this paper proposes a new pseudolite-based indoor positioning system architecture. The main idea is to receive real-world GPS signals, repeat each satellite signal and transmit those using indoor transmitting antennas. The transmitted GPS-like signal can be processed (signal acquisition and tracking, navigation data decoding) by the general receiver and thus no hardware-level modification on the receiver is required. In addition, all Tx can be synchronized with each other since one single clock is used in Rx/Tx. The proposed system is simulated using a software GPS receiver. The simulation results show the indoor positioning system is able to provide high accurate horizontal positioning in both static and dynamic situations.

  4. Architecture of Maritime Awareness System Supplied with External Information

    Directory of Open Access Journals (Sweden)

    Stróżyna Milena

    2016-12-01

    Full Text Available In this paper, we discuss a software architecture, which has been developed for the needs of the System for Intelligent Maritime Monitoring (SIMMO. The system bases on the state-of-the-art information fusion and intelligence analysis techniques, which generates an enhanced Recognized Maritime Picture and thus supports situation analysis and decision- making. The SIMMO system aims to automatically fuse an up-to-date maritime data from Automatic Identification System (AIS and open Internet sources. Based on collected data, data analysis is performed to detect suspicious vessels. Functionality of the system is realized in a number of different modules (web crawlers, data fusion, anomaly detection, visualization modules that share the AIS and external data stored in the system’s database. The aim of this article is to demonstrate how external information can be leveraged in maritime awareness system and what software solutions are necessary. A working system is presented as a proof of concept.

  5. Neuromorphic Computing – From Materials Research to Systems Architecture Roundtable

    Energy Technology Data Exchange (ETDEWEB)

    Schuller, Ivan K. [Univ. of California, San Diego, CA (United States); Stevens, Rick [Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Chicago, IL (United States); Pino, Robinson [Dept. of Energy (DOE) Office of Science, Washington, DC (United States); Pechan, Michael [Dept. of Energy (DOE) Office of Science, Washington, DC (United States)

    2015-10-29

    Computation in its many forms is the engine that fuels our modern civilization. Modern computation—based on the von Neumann architecture—has allowed, until now, the development of continuous improvements, as predicted by Moore’s law. However, computation using current architectures and materials will inevitably—within the next 10 years—reach a limit because of fundamental scientific reasons. DOE convened a roundtable of experts in neuromorphic computing systems, materials science, and computer science in Washington on October 29-30, 2015 to address the following basic questions: Can brain-like (“neuromorphic”) computing devices based on new material concepts and systems be developed to dramatically outperform conventional CMOS based technology? If so, what are the basic research challenges for materials sicence and computing? The overarching answer that emerged was: The development of novel functional materials and devices incorporated into unique architectures will allow a revolutionary technological leap toward the implementation of a fully “neuromorphic” computer. To address this challenge, the following issues were considered: The main differences between neuromorphic and conventional computing as related to: signaling models, timing/clock, non-volatile memory, architecture, fault tolerance, integrated memory and compute, noise tolerance, analog vs. digital, and in situ learning New neuromorphic architectures needed to: produce lower energy consumption, potential novel nanostructured materials, and enhanced computation Device and materials properties needed to implement functions such as: hysteresis, stability, and fault tolerance Comparisons of different implementations: spin torque, memristors, resistive switching, phase change, and optical schemes for enhanced breakthroughs in performance, cost, fault tolerance, and/or manufacturability.

  6. The type II secretion system: biogenesis, molecular architecture and mechanism.

    Science.gov (United States)

    Korotkov, Konstantin V; Sandkvist, Maria; Hol, Wim G J

    2012-04-02

    Many gram-negative bacteria use the sophisticated type II secretion system (T2SS) to translocate a wide range of proteins from the periplasm across the outer membrane. The inner-membrane platform of the T2SS is the nexus of the system and orchestrates the secretion process through its interactions with the periplasmic filamentous pseudopilus, the dodecameric outer-membrane complex and a cytoplasmic secretion ATPase. Here, recent structural and biochemical information is reviewed to describe our current knowledge of the biogenesis and architecture of the T2SS and its mechanism of action.

  7. A multi-agent system architecture for geographic information gathering.

    Science.gov (United States)

    Gao, Gang-Yi; Wang, Shen-Kang

    2004-11-01

    World Wide Web (WWW) is a vast repository of information, including a great deal of geographic information. But the location and retrieval of geographic information will require a significant amount of time and effort. In addition, different users usually have different views and interests in the same information. To resolve such problems, this paper first proposed a model of geographic information gathering based on multi-Agent (MA) architecture. Then based on this model, we construct a prototype system with GML (Geography Markup Language). This system consists of three tiers-Client, Web Server and Data Resource. Finally, we expatiate on the process of Web Server.

  8. A multi-Agent system architecture for geographic information gathering

    Institute of Scientific and Technical Information of China (English)

    高刚毅; 王申康

    2004-01-01

    World Wide Web (WWW) is a vast repository of information, including a great deal of geographic information. But the location and retrieval of geographic information will require a significant amount of time and effort. In addition, different users usually have different views and interests in the same information. To resolve such problems, this paper first proposed a model of geographic information gathering based on multi-Agent (MA) architecture. Then based on this model, we construct a prototype system with GML (Geography Markup Language). This system consists of three tiers-Client, Web Server and Data Resource. Finally, we expatiate on the process of Web Server.

  9. Advances in network systems architectures, security, and applications

    CERN Document Server

    Awad, Ali; Furtak, Janusz; Legierski, Jarosław

    2017-01-01

    This book provides the reader with a comprehensive selection of cutting–edge algorithms, technologies, and applications. The volume offers new insights into a range of fundamentally important topics in network architectures, network security, and network applications. It serves as a reference for researchers and practitioners by featuring research contributions exemplifying research done in the field of network systems. In addition, the book highlights several key topics in both theoretical and practical aspects of networking. These include wireless sensor networks, performance of TCP connections in mobile networks, photonic data transport networks, security policies, credentials management, data encryption for network transmission, risk management, live TV services, and multicore energy harvesting in distributed systems. .

  10. Open architecture for health care systems: the European RICHE experience.

    Science.gov (United States)

    Frandji, B

    1997-01-01

    Groupe RICHE is bringing to the market of health IT the Open Systems approach allowing a new generation of health information systems to arise with benefit for patients, health care professionals, hospital managers, agencies and citizens. Groupe RICHE is a forum for exchanging information, expertise around open systems in health care. It is open to any organisation interested by open systems in health care and wanting to participate and influence the work done by its user, marketing and technical committees. The Technical Committee is in charge of the maintenance of the architecture and impact the results of industrial experiences on new releases. Any Groupe RICHE member is entitled to participate to this process. This unique approach in Europe allows health care professionals to benefit from applications supporting their business processes, including providing a cooperative working environment, a shared electronic record, in an integrated system where the information is entered only once, customised according to the user needs and available to the administrative applications. This allows Hospital managers to satisfy their health care professionals, to smoothly migrate from their existing environment (protecting their investment), to choose products in a competitive environment, being able to mix and match system components and services from different suppliers, being free to change suppliers without having to replace their existing system (minimising risk), in line with national and regional strategies. For suppliers, this means being able to commercialise products well fitted to their field of competence in a large market, reducing investments and increasing returns. The RICHE approach also allows agencies to define a strategy, allowing to create a supporting infrastructure, organising the market leaving enough freedom to health care organisations and suppliers. Such an approach is based on the definition of an open standard architecture. The RICHE esprit project

  11. Modeling and Simulation of an Unmanned Ground Vehicle Power System

    Science.gov (United States)

    2014-03-28

    Wilhelm, A. N., Surgenor, B. W., and Pharoah, J. G., “Design and evaluation of a micro-fuel-cell-based power system for a mobile robot ,” Mechatronics ...of Michigan, Ann Arbor, MI, USA bU.S. Army RDECOM-TARDEC, Warren, MI, USA ABSTRACT Long-duration missions challenge ground robot systems with respect...to energy storage and efficient conversion to power on demand. Ground robot systems can contain multiple power sources such as fuel cell, battery and

  12. A Quarter Active Suspension System Based Ground-Hook Controller

    OpenAIRE

    Turnip Arjon

    2016-01-01

    An alternative design technique for active suspension system of vehicle using a developved ground-hook damping system as a reference is proposed. The controller parameters are determined using Lyapunov method and can be tuned to precisely achieve the type of desired response which given by reference model. The simulation result show that the designed active suspension system based ground-hook reference model is able to significantly improve the ride comfort and the road holding compared with ...

  13. PC-Cluster based Storage System Architecture for Cloud Storage

    CERN Document Server

    Yee, Tin Tin

    2011-01-01

    Design and architecture of cloud storage system plays a vital role in cloud computing infrastructure in order to improve the storage capacity as well as cost effectiveness. Usually cloud storage system provides users to efficient storage space with elasticity feature. One of the challenges of cloud storage system is difficult to balance the providing huge elastic capacity of storage and investment of expensive cost for it. In order to solve this issue in the cloud storage infrastructure, low cost PC cluster based storage server is configured to be activated for large amount of data to provide cloud users. Moreover, one of the contributions of this system is proposed an analytical model using M/M/1 queuing network model, which is modeled on intended architecture to provide better response time, utilization of storage as well as pending time when the system is running. According to the analytical result on experimental testing, the storage can be utilized more than 90% of storage space. In this paper, two parts...

  14. Architectural requirements for the Red Storm computing system.

    Energy Technology Data Exchange (ETDEWEB)

    Camp, William J.; Tomkins, James Lee

    2003-10-01

    This report is based on the Statement of Work (SOW) describing the various requirements for delivering 3 new supercomputer system to Sandia National Laboratories (Sandia) as part of the Department of Energy's (DOE) Accelerated Strategic Computing Initiative (ASCI) program. This system is named Red Storm and will be a distributed memory, massively parallel processor (MPP) machine built primarily out of commodity parts. The requirements presented here distill extensive architectural and design experience accumulated over a decade and a half of research, development and production operation of similar machines at Sandia. Red Storm will have an unusually high bandwidth, low latency interconnect, specially designed hardware and software reliability features, a light weight kernel compute node operating system and the ability to rapidly switch major sections of the machine between classified and unclassified computing environments. Particular attention has been paid to architectural balance in the design of Red Storm, and it is therefore expected to achieve an atypically high fraction of its peak speed of 41 TeraOPS on real scientific computing applications. In addition, Red Storm is designed to be upgradeable to many times this initial peak capability while still retaining appropriate balance in key design dimensions. Installation of the Red Storm computer system at Sandia's New Mexico site is planned for 2004, and it is expected that the system will be operated for a minimum of five years following installation.

  15. Space Telecommunications Radio System Software Architecture Concepts and Analysis

    Science.gov (United States)

    Handler, Louis M.; Hall, Charles S.; Briones, Janette C.; Blaser, Tammy M.

    2008-01-01

    The Space Telecommunications Radio System (STRS) project investigated various Software Defined Radio (SDR) architectures for Space. An STRS architecture has been selected that separates the STRS operating environment from its various waveforms and also abstracts any specialized hardware to limit its effect on the operating environment. The design supports software evolution where new functionality is incorporated into the radio. Radio hardware functionality has been moving from hardware based ASICs into firmware and software based processors such as FPGAs, DSPs and General Purpose Processors (GPPs). Use cases capture the requirements of a system by describing how the system should interact with the users or other systems (the actors) to achieve a specific goal. The Unified Modeling Language (UML) is used to illustrate the Use Cases in a variety of ways. The Top Level Use Case diagram shows groupings of the use cases and how the actors are involved. The state diagrams depict the various states that a system or object may be in and the transitions between those states. The sequence diagrams show the main flow of activity as described in the use cases.

  16. An architecture model for multiple disease management information systems.

    Science.gov (United States)

    Chen, Lichin; Yu, Hui-Chu; Li, Hao-Chun; Wang, Yi-Van; Chen, Huang-Jen; Wang, I-Ching; Wang, Chiou-Shiang; Peng, Hui-Yu; Hsu, Yu-Ling; Chen, Chi-Huang; Chuang, Lee-Ming; Lee, Hung-Chang; Chung, Yufang; Lai, Feipei

    2013-04-01

    Disease management is a program which attempts to overcome the fragmentation of healthcare system and improve the quality of care. Many studies have proven the effectiveness of disease management. However, the case managers were spending the majority of time in documentation, coordinating the members of the care team. They need a tool to support them with daily practice and optimizing the inefficient workflow. Several discussions have indicated that information technology plays an important role in the era of disease management. Whereas applications have been developed, it is inefficient to develop information system for each disease management program individually. The aim of this research is to support the work of disease management, reform the inefficient workflow, and propose an architecture model that enhance on the reusability and time saving of information system development. The proposed architecture model had been successfully implemented into two disease management information system, and the result was evaluated through reusability analysis, time consumed analysis, pre- and post-implement workflow analysis, and user questionnaire survey. The reusability of the proposed model was high, less than half of the time was consumed, and the workflow had been improved. The overall user aspect is positive. The supportiveness during daily workflow is high. The system empowers the case managers with better information and leads to better decision making.

  17. Classical ground states of symmetric Heisenberg spin systems

    CERN Document Server

    Schmidt, H J

    2003-01-01

    We investigate the ground states of classical Heisenberg spin systems which have point group symmetry. Examples are the regular polygons (spin rings) and the seven quasi-regular polyhedra including the five Platonic solids. For these examples, ground states with special properties, e.g. coplanarity or symmetry, can be completely enumerated using group-theoretical methods. For systems having coplanar (anti-) ground states with vanishing total spin we also calculate the smallest and largest energies of all states having a given total spin S. We find that these extremal energies depend quadratically on S and prove that, under certain assumptions, this happens only for systems with coplanar S = 0 ground states. For general systems the corresponding parabolas represent lower and upper bounds for the energy values. This provides strong support and clarifies the conditions for the so-called rotational band structure hypothesis which has been numerically established for many quantum spin systems.

  18. 2016 37th International Conference Information Systems Architecture and Technology

    CERN Document Server

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2017-01-01

    This four volume set of books constitutes the proceedings of the 2016 37th International Conference Information Systems Architecture and Technology (ISAT), or ISAT 2016 for short, held on September 18–20, 2016 in Karpacz, Poland. The conference was organized by the Department of Management Systems and the Department of Computer Science, Wrocław University of Science and Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and mulit-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Architect...

  19. Blackboard architectures and their relationship to autonomous space systems

    Science.gov (United States)

    Thornbrugh, Allison

    1988-01-01

    The blackboard architecture provides a powerful paradigm for the autonomy expected in future spaceborne systems, especially SDI and Space Station. Autonomous systems will require skill in both the classic task of information analysis and the newer tasks of decision making, planning and system control. Successful blackboard systems have been built to deal with each of these tasks separately. The blackboard paradigm achieves success in difficult domains through its ability to integrate several uncertain sources of knowledge. In addition to flexible behavior during autonomous operation, the system must also be capable of incrementally growing from semiautonomy to full autonomy. The blackboard structure allows this development. The blackboard's ability to handle error, its flexible execution, and variants of this paradigm are discussed as they apply to specific problems of the space environment.

  20. Remote Control for Robotic Systems Using CORBA as Communication Architecture

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper proposes a novel method to implement network connections among a client and remoterobotic systems using CORBA for developing telecare system to aid the aged or disabled. The proposed methodmakes system have low cost and wide availability, high scaling and inter-operating ability to allow the clients andserver objects, written in different languages, run in different operating system, and connected in different net-work to inter-operate. It also makes system easy to be extended and integrated with the other technologies andapplications distributed over the Internet. Using CORBA as a communication architecture, we developed hard-ware base, task-level robot arm control server, live image feedback server and mobile robot control server,which can provide some basic care services to aid the aged and disabled.

  1. Dynamical architectures of planetary systems induced by orbital migration

    CERN Document Server

    Szuszkiewicz, Ewa

    2009-01-01

    The aim of this talk is to present the most recent advances in establishing plausible planetary system architectures determined by the gravitational tidal interactions between the planets and the disc in which they are embedded during the early epoch of planetary system formation. We concentrate on a very well defined and intensively studied process of the disc-planet interaction leading to the planet migration. We focus on the dynamics of the systems in which low-mass planets are present. Particular attention is devoted to investigation of the role of resonant configurations. Our studies, apart from being complementary to the fast progress occurring just now in observing the whole variety of planetary systems and uncovering their structure and origin, can also constitute a valuable contribution in support of the missions planned to enhance the number of detected multiple systems.

  2. 36th International Conference on Information Systems Architecture and Technology

    CERN Document Server

    Grzech, Adam; Świątek, Jerzy; Wilimowska, Zofia

    2016-01-01

    This four volume set of books constitutes the proceedings of the 36th International Conference Information Systems Architecture and Technology 2015, or ISAT 2015 for short, held on September 20–22, 2015 in Karpacz, Poland. The conference was organized by the Computer Science and Management Systems Departments, Faculty of Computer Science and Management, Wroclaw University of Technology, Poland. The papers included in the proceedings have been subject to a thorough review process by highly qualified peer reviewers. The accepted papers have been grouped into four parts: Part I—addressing topics including, but not limited to, systems analysis and modeling, methods for managing complex planning environment and insights from Big Data research projects. Part II—discoursing about topics including, but not limited to, Web systems, computer networks, distributed computing, and multi-agent systems and Internet of Things. Part III—discussing topics including, but not limited to, mobile and Service Oriented Archi...

  3. Architectural slicing

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2013-01-01

    a system and a slicing criterion, architectural slicing produces an architectural prototype that contain the elements in the architecture that are dependent on the ele- ments in the slicing criterion. Furthermore, we present an initial design and implementation of an architectural slicer for Java.......Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...... of architectural prototyping since experiments with full systems are complex and expensive and thus architectural learn- ing is hindered. In this paper, we propose a novel technique for harvest- ing architectural prototypes from existing systems, \\architectural slic- ing", based on dynamic program slicing. Given...

  4. Architectural Slicing

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2013-01-01

    a system and a slicing criterion, architectural slicing produces an architectural prototype that contain the elements in the architecture that are dependent on the ele- ments in the slicing criterion. Furthermore, we present an initial design and implementation of an architectural slicer for Java.......Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...... of architectural prototyping since experiments with full systems are complex and expensive and thus architectural learn- ing is hindered. In this paper, we propose a novel technique for harvest- ing architectural prototypes from existing systems, \\architectural slic- ing", based on dynamic program slicing. Given...

  5. Control system devices : architectures and supply channels overview.

    Energy Technology Data Exchange (ETDEWEB)

    Trent, Jason; Atkins, William Dee; Schwartz, Moses Daniel; Mulder, John C.

    2010-08-01

    This report describes a research project to examine the hardware used in automated control systems like those that control the electric grid. This report provides an overview of the vendors, architectures, and supply channels for a number of control system devices. The research itself represents an attempt to probe more deeply into the area of programmable logic controllers (PLCs) - the specialized digital computers that control individual processes within supervisory control and data acquisition (SCADA) systems. The report (1) provides an overview of control system networks and PLC architecture, (2) furnishes profiles for the top eight vendors in the PLC industry, (3) discusses the communications protocols used in different industries, and (4) analyzes the hardware used in several PLC devices. As part of the project, several PLCs were disassembled to identify constituent components. That information will direct the next step of the research, which will greatly increase our understanding of PLC security in both the hardware and software areas. Such an understanding is vital for discerning the potential national security impact of security flaws in these devices, as well as for developing proactive countermeasures.

  6. Rapid architecture alternative modeling (RAAM): A framework for capability-based analysis of system of systems architectures

    Science.gov (United States)

    Iacobucci, Joseph V.

    The research objective for this manuscript is to develop a Rapid Architecture Alternative Modeling (RAAM) methodology to enable traceable Pre-Milestone A decision making during the conceptual phase of design of a system of systems. Rather than following current trends that place an emphasis on adding more analysis which tends to increase the complexity of the decision making problem, RAAM improves on current methods by reducing both runtime and model creation complexity. RAAM draws upon principles from computer science, system architecting, and domain specific languages to enable the automatic generation and evaluation of architecture alternatives. For example, both mission dependent and mission independent metrics are considered. Mission dependent metrics are determined by the performance of systems accomplishing a task, such as Probability of Success. In contrast, mission independent metrics, such as acquisition cost, are solely determined and influenced by the other systems in the portfolio. RAAM also leverages advances in parallel computing to significantly reduce runtime by defining executable models that are readily amendable to parallelization. This allows the use of cloud computing infrastructures such as Amazon's Elastic Compute Cloud and the PASTEC cluster operated by the Georgia Institute of Technology Research Institute (GTRI). Also, the amount of data that can be generated when fully exploring the design space can quickly exceed the typical capacity of computational resources at the analyst's disposal. To counter this, specific algorithms and techniques are employed. Streaming algorithms and recursive architecture alternative evaluation algorithms are used that reduce computer memory requirements. Lastly, a domain specific language is created to provide a reduction in the computational time of executing the system of systems models. A domain specific language is a small, usually declarative language that offers expressive power focused on a particular

  7. CCPA: Component-based communication protocol architecture for embedded systems

    Institute of Scientific and Technical Information of China (English)

    DAI Hong-jun; CHEN Tian-zhou; CHEN Chun

    2005-01-01

    For increased and various communication requirements of modem applications on embedded systems, general purpose protocol stacks and protocol models are not efficient because they are fixed to execute in the static mode. We present the Component-Based Communication Protocol Architecture (CCPA) to make communication dynamic and configurable. It can develop, test and store the customized components for flexible reuse. The protocols are implemented by component assembly and support by configurable environments. This leads to smaller memory, more flexibility, more reconfiguration ability, better concurrency, and multiple data channel support.

  8. System Architecture and Mobility Management for Mobile Immersive Communications

    Directory of Open Access Journals (Sweden)

    Mehran Dowlatshahi

    2007-01-01

    Full Text Available We propose a system design for delivery of immersive communications to mobile wireless devices based on a distributed proxy model. It is demonstrated that this architecture addresses key technical challenges for the delivery of these services, that is, constraints on link capacity and power consumption in mobile devices. However, additional complexity is introduced with respect to application layer mobility management. The paper proposes three possible methods for updating proxy assignments in response to mobility management and compares the performance of these methods.

  9. Allocating SMART Reliability and Maintainability Goals to NASA Ground Systems

    Science.gov (United States)

    Gillespie, Amanda; Monaghan, Mark

    2013-01-01

    This paper will describe the methodology used to allocate Reliability and Maintainability (R&M) goals to Ground Systems Development and Operations (GSDO) subsystems currently being designed or upgraded.

  10. Computing Architecture of the ALICE Detector Control System

    CERN Document Server

    Augustinus, A; Moreno, A; Kurepin, A N; De Cataldo, G; Pinazza, O; Rosinský, P; Lechman, M; Jirdén, L S

    2011-01-01

    The ALICE Detector Control System (DCS) is based on a commercial SCADA product, running on a large Windows computer cluster. It communicates with about 1200 network attached devices to assure safe and stable operation of the experiment. In the presentation we focus on the design of the ALICE DCS computer systems. We describe the management of data flow, mechanisms for handling the large data amounts and information exchange with external systems. One of the key operational requirements is an intuitive, error proof and robust user interface allowing for simple operation of the experiment. At the same time the typical operator task, like trending or routine checks of the devices, must be decoupled from the automated operation in order to prevent overload of critical parts of the system. All these requirements must be implemented in an environment with strict security requirements. In the presentation we explain how these demands affected the architecture of the ALICE DCS.

  11. ARCHITECTURE OF MANUFACTURING EXECUTION SYSTEM IN THE EXTENDED ENTERPRISE

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The extended enterprise is formed according to the philosophy of dispersed networked manufacturing. Manufacturing execution system (MES) can close the information gap which exists between device control system and production information management system. The functions and the web-based architecture of the MES in the extended enterprise are introduced. Using the cooperating system models of object-oriented and distributed agents and CORBA, all objects keep to uniform interface standards and are easily inserted to object request broker. The utilization of distributed MES in extended enterprise can adapt fast change of manufacturing environment and resource. It also can improve the independent management capability of manufacturing cell and the enterprise response capability to global economic competition.

  12. Intelligent Architecture for Enhanced Observability for Active Distribution System

    DEFF Research Database (Denmark)

    Pokhrel, Basanta Raj; Nainar, Karthikeyan; Bak-Jensen, Birgitte

    2017-01-01

    to utilize advanced solutions by observing the system state in real time. Existing distribution automation and control system have to be upgraded to meet this technological challenge. This necessitates the use of real time system states of the grid which is a crucial factor for system operation in higher...... for active distribution network which satisfies the need for higher observability reach with less field observation. Improved state estimation with composite load forecasting model is aimed for enhanced observability. This paper also summarizes the application of intelligent architecture in the operation......There is a rapid increase of renewable energy resources (RE) and demand response resources (DRR) in the distribution networks. This is challenging for the reliable and stable operation of the grid. So, to ensure secure, optimized and economical operation in such active distribution grids they need...

  13. Opening up Architectures of Software-Intensive Systems: A Functional Decomposition to Support System Comprehension

    Science.gov (United States)

    2007-10-01

    as on a state-of-the- art survey on system architecture recovery and comprehension. Following the conception of this functional decomposition, a...consideration the findings contained in a state-of- the- art survey on system architecture recovery and comprehension that was carried out as a previous phase...constituantes. Synthèse Fournit la capacité de combiner plusieurs faits qui ont été extraits pour former un nouveau tout à un niveau d’abstraction

  14. Theory of ground state factorization in quantum cooperative systems.

    Science.gov (United States)

    Giampaolo, Salvatore M; Adesso, Gerardo; Illuminati, Fabrizio

    2008-05-16

    We introduce a general analytic approach to the study of factorization points and factorized ground states in quantum cooperative systems. The method allows us to determine rigorously the existence, location, and exact form of separable ground states in a large variety of, generally nonexactly solvable, spin models belonging to different universality classes. The theory applies to translationally invariant systems, irrespective of spatial dimensionality, and for spin-spin interactions of arbitrary range.

  15. Optimized ground-coupled heat pump system design for northern climate applications. [Including ground coil

    Energy Technology Data Exchange (ETDEWEB)

    Catan, M.A.; Baxter, V.D.

    1985-01-01

    This paper addresses the question of the performance of a ground coupled heat pump (GCHP) system with a water - source heat pump package designed expressly for such systems operating in a northern climate. The project objective was to minimize the life-cycle cost of a GCHP system by optimizing the design of both the heat pump package and the ground coil in concert. In order to achieve this objective, a number of modelling tools were developed or modified to analyze the heat pump's performance and cost and the ground coil's performance. The life-cycle cost of a GCHP system (water-source heat pump with a horizontal ground coil) for an 1800 ft/sup 2/ (167 m/sup 2/) house in Pittsburgh, PA, was minimized over a 7 year economic life. Simple payback for the optimized GCHP system, relative to conventional air-source heat pumps, was under 3 years. The water-source heat pump package resulting from this optimization is calculated to cost 21% more than its conventional counterpart with a heating coefficient of performance (COP) about 20% higher, and a cooling COP about 23% higher. In the GCHP system modeled, its annual energy savings are predicted to be about 11% compared to a system designed around the conventional heat pump while having about the same installation cost. The major conclusion of this study is - GCHP system performance improvement can be attained by improving the water-source heat pump package at less cost than by buying more ground coil. The following conclusions were drawn from the steady-state performance optimization results: (1) By adding about $100.00 to the manufacturer's cost off construction, both the heating and cooling COPs can be improved by 20% or more. (2) Cooling COP need not be sacrificed for the sake of heating performance and vice versa. 13 refs., 11 figs., 12 tabs.

  16. On the design of multimedia software and future system architectures

    Science.gov (United States)

    de With, Peter H. N.; Jaspers, Egbert G.

    2004-04-01

    A principal challenge for reducing the cost for designing complex systems-on-chip is to pursue more generic systems for a broad range of products. For this purpose, we explore three new architectural concepts for state-of-art video applications. First, we discuss a reusable scalable hardware architecture employing a hierarchical communication network fitting with the natural hierarchy of the application. In a case study, we show that MPEG streaming in DTV occurs at high level, while subsystems communicate at lower levels. The second concept is a software design that scales over a number of processors to enable reuse over a range of VLSI process technologies. We explore this via an H.264 decoder implementation scaling nearly linearly over up to eight processors by applying data partitioning. The third topic is resource-scalability, which is required to satisfy realtime constraints in a system with a high amount of shared resources. An example complexity-scalable MPEG-2 coder scales the required cycle budget with a factor of three, in parallel with a smooth degradation of quality.

  17. A distributed architecture for activating the peripheral nervous system

    Science.gov (United States)

    Andreu, David; Guiraud, David; Souquet, Guillaume

    2009-04-01

    We present a new system for functional electrical stimulation (FES) applications based on networked stimulation units. They embed an advanced analog circuit, which provides multipolar and multiphasic stimulation profiles, and digital circuits, which ensure safety, locally executed programmed profiles, and communication with the master controller. This architecture is thus based on distributed stimulation units (DSU) that need only a two-wire bus to communicate, regardless of the number of poles of each DSU-driven electrode. This structure minimizes the required bandwidth between master and distributed units, increases the safety and stimulation features and decreases the complexity of the surgical approach. We have successfully tested this network-based stimulation architecture on benchtop stimulators. This original approach allows broad exploration of all possible methods to stimulate peripheral nerves, particularly in the goal of restoring the motor function. It provides a powerful research device to determine the optimal, least aggressive and the most efficient way to activate the peripheral nervous system using an implanted FES system that is less invasive than other existing devices.

  18. Comparing the architecture of Grid Computing and Cloud Computing systems

    Directory of Open Access Journals (Sweden)

    Abdollah Doavi

    2015-09-01

    Full Text Available Grid Computing or computational connected networks is a new network model that allows the possibility of massive computational operations using the connected resources, in fact, it is a new generation of distributed networks. Grid architecture is recommended because the widespread nature of the Internet makes an exciting environment called 'Grid' to create a scalable system with high-performance, generalized and secure. Then the central architecture called to this goal is a firmware named GridOS. The term 'cloud computing' means the development and deployment of Internet –based computing technology. This is a style of computing in an environment where IT-related capabilities offered as a service or users services. And it allows him/her to have access to technology-based services on the Internet; without the user having the specific information about this technology or (s he wants to take control of the IT infrastructure supported by him/her. In the paper, general explanations are given about the systems Grid and Cloud. Then their provided components and services are checked by these systems and their security.

  19. Middleware Architecture for the Interconnection of Distributed and Parallel Systems

    Directory of Open Access Journals (Sweden)

    Ovidiu Gherman

    2012-01-01

    Full Text Available Grid computing is a fast evolving technology, bringing more computing power to its users. Two main directions are observable: creating dedicated supercomputers for scientific and commercial tasks and creating distributed commodity-based systems. The first ones are usually much expensive, but have the advantage of performance, better control and uniformity in platforms. The second one is more affordable but lacks in flexibility and easy maintenance. The computing necessities that often require supplementary computing power for certain time periods are better satisfied by interconnecting available resources than buying new, expensive ones. But interconnecting platforms – sometimes radically different – can be a difficult task. The proliferation of hybrid parallel computing systems can be even more complicated because it puts in contact systems with various operating flows at the parallelism level. In this frame, the present article proposes a new middleware architecture that can connect multiple parallel or distributed resources, of different types, allowing unitary resource utilization and reservation for the user’s jobs. The new architecture is described functionally and structurally.

  20. A distributed architecture for activating the peripheral nervous system.

    Science.gov (United States)

    Andreu, David; Guiraud, David; Souquet, Guillaume

    2009-04-01

    We present a new system for functional electrical stimulation (FES) applications based on networked stimulation units. They embed an advanced analog circuit, which provides multipolar and multiphasic stimulation profiles, and digital circuits, which ensure safety, locally executed programmed profiles, and communication with the master controller. This architecture is thus based on distributed stimulation units (DSU) that need only a two-wire bus to communicate, regardless of the number of poles of each DSU-driven electrode. This structure minimizes the required bandwidth between master and distributed units, increases the safety and stimulation features and decreases the complexity of the surgical approach. We have successfully tested this network-based stimulation architecture on benchtop stimulators. This original approach allows broad exploration of all possible methods to stimulate peripheral nerves, particularly in the goal of restoring the motor function. It provides a powerful research device to determine the optimal, least aggressive and the most efficient way to activate the peripheral nervous system using an implanted FES system that is less invasive than other existing devices.

  1. Evolution of thorax architecture in ant castes highlights trade-off between flight and ground behaviors.

    Science.gov (United States)

    Keller, Roberto A; Peeters, Christian; Beldade, Patrícia

    2014-01-01

    The concerted evolution of morphological and behavioral specializations has compelling examples in ant castes. Unique to ants is a marked divergence between winged queens and wingless workers, but morphological specializations for behaviors on the ground have been overlooked. We analyzed thorax morphology of queens and workers in species from 21 of the 25 ant subfamilies. We uncovered unique skeletomuscular modifications in workers that presumably increase power and flexibility of head-thorax articulation, emphasizing that workers are not simply wingless versions of queens. We also identified two distinct types of queens and showed repeated evolutionary associations with strategies of colony foundation. Solitary founding queens that hunt have a more worker-like thorax. Our results reveal that ants invest in the relative size of thorax segments according to their tasks. Versatility of head movements allows for better manipulation of food and objects, which arguably contributed to the ants' ecological and evolutionary success. DOI: http://dx.doi.org/10.7554/eLife.01539.001.

  2. Advanced Ground Systems Maintenance Physics Models For Diagnostics Project

    Science.gov (United States)

    Perotti, Jose M.

    2015-01-01

    The project will use high-fidelity physics models and simulations to simulate real-time operations of cryogenic and systems and calculate the status/health of the systems. The project enables the delivery of system health advisories to ground system operators. The capability will also be used to conduct planning and analysis of cryogenic system operations. This project will develop and implement high-fidelity physics-based modeling techniques tosimulate the real-time operation of cryogenics and other fluids systems and, when compared to thereal-time operation of the actual systems, provide assessment of their state. Physics-modelcalculated measurements (called “pseudo-sensors”) will be compared to the system real-timedata. Comparison results will be utilized to provide systems operators with enhanced monitoring ofsystems' health and status, identify off-nominal trends and diagnose system/component failures.This capability can also be used to conduct planning and analysis of cryogenics and other fluidsystems designs. This capability will be interfaced with the ground operations command andcontrol system as a part of the Advanced Ground Systems Maintenance (AGSM) project to helpassure system availability and mission success. The initial capability will be developed for theLiquid Oxygen (LO2) ground loading systems.

  3. The Spartan attitude control system - Ground support computer

    Science.gov (United States)

    Schnurr, R. G., Jr.

    1986-01-01

    The Spartan Attitude Control System (ACS) contains a command and control computer. This computer is optimized for the activities of the flight and contains very little human interface hardware and software. The computer system provides the technicians testing of Spartan ACS with a convenient command-oriented interface to the flight ACS computer. The system also decodes and time tags data automatically sent out by the flight computer as key events occur. The duration and magnitude of all system maneuvers is also derived and displayed by this system. The Ground Support Computer is also the primary Ground Support Equipment for the flight sequencer which controls all payload maneuvers, and long term program timing.

  4. A Reusable Software Architecture for Small Satellite AOCS Systems

    DEFF Research Database (Denmark)

    Alminde, Lars; Bendtsen, Jan Dimon; Laursen, Karl Kaas

    2006-01-01

    with both hardware and on-board software. Some of the key issues addressed by the framework are automatic translation of mathematical specifications of hybrid systems into executable software entities, management of execution of coupled models in a parallel distributed environment, as well as interaction......This paper concerns the software architecture called Sophy, which is an abbreviation for Simulation, Observation, and Planning in HYbrid systems. We present a framework that allows execution of hybrid dynamical systems in an on-line distributed computing environment, which includes interaction...... with external components, hardware and/or software, through generic interfaces. Sophy is primarily intended as a tool for development of model based reusable software for the control and autonomous functions of satellites and/or satellite clusters....

  5. Architectural Review of Load Balancing Single System Image

    Directory of Open Access Journals (Sweden)

    B. S. Ahmed

    2008-01-01

    Full Text Available Problem statement: With the growing popularity of clustering application combined with apparent usability, the single system image is in the limelight and actively studied as an alternative solution for computational intensive applications as well as the platform for next evolutionary grid computing era. Approach: Existing researches in this field concentrated on various features of Single System Images like file system and memory management. However, an important design consideration for this environment is load allocation and balancing that is usually handled by an automatic process migration daemon. Literature shows that the design concepts and factors that affect the load balancing feature in an SSI system are not clear. Result: This study will review some of the most popular architecture and algorithms used in load balancing single system image. Various implementations from the past to present will be presented while focusing on the factors that affect the performance of such system. Conclusion: The study showed that although there are some successful open source systems, the wide range of implemented systems investigated that research activity should concentrate on the systems that have already been proposed and proved effectiveness to achieve a high quality load balancing system.

  6. Application System Architecture for Cellular Phones by Dividing Interaction Logics

    Science.gov (United States)

    Kitamura, Misayo; Todoroki, Nobutoshi; Akiyoshi, Masanori; Kojima, Taizo

    This paper describes application system architecture using cellular phones as user interface devices, which enables users to interact with the system by graphic symbols on a client screen. Our approach has the following features: (i) divided interaction logics running on a server and a Java phone client; both interaction logics cooperate to accomplish a user's operation using a simplified script, (ii) local interaction which enables users to handle figures on a client screen without connecting to a server, and (iii) device-independent script which hides the differences of API sets among various cellular phones. By using this architecture, complicated figures including lots of graphic symbols can be displayed in spite of program-size limitation on a client device, and application programs including same interaction logics are just described once for various cellular phones. Our experiments show the advantage of the local interaction. A client program can respond immediately when handling complicated figures. The ratio of requests to the server is reduced to 23%. It takes less than 9 seconds to display typical contents, which is good enough for practical use. This method also reduces development costs at the second development or later.

  7. Photo-active collagen systems with controlled triple helix architecture.

    Science.gov (United States)

    Tronci, Giuseppe; Russell, Stephen J; Wood, David J

    2013-08-14

    The design of photo-active collagen systems is presented as a basis for establishing biomimetic materials with varied network architecture and programmable macroscopic properties. Following in-house isolation of type I collagen, reaction with vinyl-bearing compounds of varied backbone rigidity, i.e. 4-vinylbenzyl chloride (4VBC) and glycidyl methacrylate (GMA), was carried out. TNBS colorimetric assay, (1)H-NMR and ATR-FTIR confirmed covalent and tunable functionalization of collagen lysines. Depending on the type and extent of functionalization, controlled stability and thermal denaturation of triple helices were observed via circular dichroism (CD), whereby the hydrogen-bonding capability of introduced moieties was shown to play a major role. Full gel formation was observed following photo-activation of functionalized collagen solutions. The presence of a covalent network only slightly affected collagen triple helix conformation (as observed by WAXS and ATR-FTIR), confirming the structural organization of functionalized collagen precursors. Photo-activated hydrogels demonstrated an increased denaturation temperature (DSC) with respect to native collagen, suggesting that the formation of the covalent network successfully stabilized collagen triple helices. Moreover, biocompatibility and mechanical competence of obtained hydrogels were successfully demonstrated under physiologically-relevant conditions. These results demonstrate that this novel synthetic approach enabled the formation of biocompatible collagen systems with defined network architecture and programmable macroscopic properties, which can only partially be obtained with current synthetic methods.

  8. Make/Shift/Shelter: Architecture and the Failure of Global Systems

    Directory of Open Access Journals (Sweden)

    Stephen Mark Caffey

    2013-10-01

    Full Text Available The unanticipated challenges that architects and architecture face in the twenty-first century are no more daunting than those that plague other professions and other forms of cultural production. Just as these conditions call for a new set of disciplinary and practical flexibilities necessary to undertake on-the-ground architectural interventions in affected communities, architectural historians must make concomitant adjustments in chronicling the new forces, materials, ideas, methods and contexts that drive architectural design in these troubled and troubling times. One might reasonably suggest any number of ways to situate architecture and its histories in the current climate. The approach here taken operates from three critical perspectives: architecture 'in' crisis, architecture 'as' crisis, architecture 'and' crisis. More polemical than prescriptive, this essay poses a series of questions and proposes a set of possibilities regarding the architectural-historical assessment of contemporary practice. Toward that objective, this article addresses the issue of crisis in architecture through a cursory and anecdotal selection of evidence in turn refracted through lenses global and local.

  9. ‘Living’ Architecture Overviews - Supporting the Design of Complex Systems

    NARCIS (Netherlands)

    Borches, P.D.; Bonnema, G.M.

    2008-01-01

    When dealing with complex systems, it is essential that designers and system architects have a clear understanding of the system as a whole. The main ‘tool’ for this is the so-called ‘system architecture description’ or ‘reference architecture’. Although the concept of system architecture descriptio

  10. S3A: Secure System Simplex Architecture for Enhanced Security of Cyber-Physical Systems

    CERN Document Server

    Mohan, Sibin; Betti, Emiliano; Yun, Heechul; Sha, Lui; Caccamo, Marco

    2012-01-01

    Until recently, cyber-physical systems, especially those with safety-critical properties that manage critical infrastructure (e.g. power generation plants, water treatment facilities, etc.) were considered to be invulnerable against software security breaches. The recently discovered 'W32.Stuxnet' worm has drastically changed this perception by demonstrating that such systems are susceptible to external attacks. Here we present an architecture that enhances the security of safety-critical cyber-physical systems despite the presence of such malware. Our architecture uses the property that control systems have deterministic execution behavior, to detect an intrusion within 0.6 {\\mu}s while still guaranteeing the safety of the plant. We also show that even if an attack is successful, the overall state of the physical system will still remain safe. Even if the operating system's administrative privileges have been compromised, our architecture will still be able to protect the physical system from coming to harm.

  11. Robotic architectures

    CSIR Research Space (South Africa)

    Mtshali, M

    2010-01-01

    Full Text Available In the development of mobile robotic systems, a robotic architecture plays a crucial role in interconnecting all the sub-systems and controlling the system. The design of robotic architectures for mobile autonomous robots is a challenging...

  12. Integrated Train Ground Radio Communication System Based TD-LTE

    Institute of Scientific and Technical Information of China (English)

    ZHAO Hongli; CAO Yuan; ZHU Li; XU Wei

    2016-01-01

    In existing metro systems, the train ground radio communication system for different applications are deployed independently. Investing and constructing the communication infrastructures repeatedly wastes substan-tial social resources, and it brings difficulties to maintain all these infrastructures. We present the communication Quality of service (QoS) requirement for different train ground radio applications. An integrated TD-LTE based train ground radio communication system for the metro system (LTE-M) is designed next. In order to test the LTE-M system performance, an indoor testing environment is set up. The channel simulator and programmable attenua-tors are used to simulate the real metro environment. Ex-tensive test results show that the designed LTE-M system performance satisfies metro communication requirements.

  13. Integrated Context-Aware Driver Assistance System Architecture

    Directory of Open Access Journals (Sweden)

    Elhadi M. Shakshuki

    2013-01-01

    Full Text Available Recently, significant improvements have been made in the area of vehicular communication systems. Furthermore, vehicle-to-vehicle communication is considered a key concept for keeping roads safe. An efficient implementation of these systems is necessary to ensure the safety of driving situations and to reduce the collision rates. This paper proposes a Context-Aware Driver Assistance System that links drivers with the physical environment surrounding them using multiple types of sensors and traffic systems as well as considering the senior driver's difficulties and the system processing time. This is achieved by developing a warning system that assists drivers to avoid collisions and improve their response times. The proposed system architecture consists of a set of components to process the user's request such as parking assistance, and to provide responses and advices when needed. These components include communication, knowledge exchange, knowledge update, and context-history. Also, it includes other processes such as context-history manipulation, hazard detection, and hazard detection control. The main goal of the proposed system is to reduce the number of car accidents and improve driver's decisions. The NXT Robotic environment is used to demonstrate the feasibility of the proposed system.

  14. Water System Architectures for Moon and Mars Bases

    Science.gov (United States)

    Jones, Harry W.; Hodgson, Edward W.; Kliss, Mark H.

    2015-01-01

    Water systems for human bases on the moon and Mars will recycle multiple sources of wastewater. Systems for both the moon and Mars will also store water to support and backup the recycling system. Most water system requirements, such as number of crew, quantity and quality of water supply, presence of gravity, and surface mission duration of 6 or 18 months, will be similar for the moon and Mars. If the water system fails, a crew on the moon can quickly receive spare parts and supplies or return to Earth, but a crew on Mars cannot. A recycling system on the moon can have a reasonable reliability goal, such as only one unrecoverable failure every five years, if there is enough stored water to allow time for attempted repairs and for the crew to return if repair fails. The water system that has been developed and successfully operated on the International Space Station (ISS) could be used on a moon base. To achieve the same high level of crew safety on Mars without an escape option, either the recycling system must have much higher reliability or enough water must be stored to allow the crew to survive the full duration of the Mars surface mission. A three loop water system architecture that separately recycles condensate, wash water, and urine and flush can improve reliability and reduce cost for a Mars base.

  15. Space Telecommunications Radio System (STRS) Architecture, Tutorial Part 2 - Detailed

    Science.gov (United States)

    Handler, Louis

    2014-01-01

    The STRS architecture detail presentation presents each requirement in the STRS Architecture Standard with some examples and supporting information. The purpose is to give a platform provider, application provider, or application integrator a better, more detailed understanding of the STRS Architecture Standard and its use.

  16. Pumpage for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This digital data set represents ground-water discharged from the Death Valley regional ground-water flow system (DVRFS) through pumped wells. Pumping from wells in...

  17. Reconfigurable Architecture for Minimizing the Network Delays in the Multi-core Systems

    Directory of Open Access Journals (Sweden)

    D. Venkatavara Prasad

    2015-03-01

    Full Text Available Noc architecture performs better comparing to bus based when the number of processors is small. On the other hand bus based performs better than noc when number of the processors is large. This leads to new architecture which is hybrid bus based architecture where each node is packet switched in a mesh network of noc architecture that contains bus based system with small number of processors. Few results showed that this hybrid architecture performs optimally better than either purely noc based or purely bus based architecture. Hybrid architecture contains a processor connected to the bus, the bus in turn connected to the router. Each processor contains a private Level 1 (L1 cache. When hybrid architecture is preferable, the optimal number of processors on each bus subsystem varies based on the application. Hence the proposed architecture allows scalable bus-based multiprocessor subsystems on each node in the NoC. This system provides a multi-bus execution environment where each processor is connected to a bus and the bus-based subsystems communicate via routers connected in a mesh-style configuration. The system can be reconfigured to vary the number of bus subsystems and the number of processors on each subsystem. This architecture provides reliability and adaptability and reduces the network delays. Implementing and presenting the details of architecture and experimental results using ns2 indicating the advantages of this architecture.

  18. Potato root system development and factors that determine its architecture.

    Science.gov (United States)

    Joshi, Mukul; Fogelman, Edna; Belausov, Eduard; Ginzberg, Idit

    2016-10-20

    The potato root system is often characterized as shallow and inefficient, with poor ability to extract water and minerals from the soil. Potato root system architecture (RSA) refers to its 3-dimensional structure as determined by adventitious root (AR) growth and branching through lateral roots (LR). Understanding how the root system develops holds potential to increase plant yield and optimize agricultural land use. Root system development was monitored in greenhouse-grown potato while a root-on-a-plate assay was developed to explore factors that affect AR and LR development. Expression study of LR-related genes was conducted. Transgenic plants carrying DR5:GFP and CycB1:GUS reporter genes were used to monitor auxin signaling and cell division during root primordia formation, respectively. Maximum root development occurred mainly during the 6-week post seed-tuber planting and slowed during the onset of tuberization. AR and LR development was coordinated - a positive correlation was found between the length of AR and LR and between LR length and number. The expression of LR-related genes was higher in LR than in AR. High nitrate levels reduced LR number and length, however ablation of root-cap by high temperature (33°C) or cutting resulted with enhanced formation of LR. Growth conditions affect AR and LR development in potato, determining the final architecture of its root system. The overall results indicate that LR formation in potato follows similar pattern as in model plants, facilitating study and manipulation of its RSA to improve soil exploitation and yield. Copyright © 2016 Elsevier GmbH. All rights reserved.

  19. A CDMA architecture for a Ka-band Personal Access Satellite System

    Science.gov (United States)

    Motamedi, Masoud; Sue, Miles K.

    1990-01-01

    A Code Division Multiple Access (CDMA) architecture is currently being studied for use in a Ka-band Personal Access Satellite System (PASS). The complete architecture consisting of block diagrams of the user terminal, the supplier station, the network management center, and the satellite is described along with the access methods and frequency/time plans. The complexity of developing this system using the CDMA architecture is compared to that of a Frequency Division Multiple Access (FDMA) architecture. The inherent advantages and disadvantages of the two architectures are compared and their respective capacities are discussed.

  20. A Sustainable, Reliable Mission-Systems Architecture that Supports a System of Systems Approach to Space Exploration

    Science.gov (United States)

    Watson, Steve; Orr, Jim; O'Neil, Graham

    2004-01-01

    A mission-systems architecture based on a highly modular "systems of systems" infrastructure utilizing open-standards hardware and software interfaces as the enabling technology is absolutely essential for an affordable and sustainable space exploration program. This architecture requires (a) robust communication between heterogeneous systems, (b) high reliability, (c) minimal mission-to-mission reconfiguration, (d) affordable development, system integration, and verification of systems, and (e) minimum sustaining engineering. This paper proposes such an architecture. Lessons learned from the space shuttle program are applied to help define and refine the model.

  1. Open System of Agile Ground Stations Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Phase I effort demonstrated, through actual development and tests with a spacecraft system, the technical and programmatic feasibility of developing, within the...

  2. Evaluating Cloud Computing in the Proposed NASA DESDynI Ground Data System

    Science.gov (United States)

    Tran, John J.; Cinquini, Luca; Mattmann, Chris A.; Zimdars, Paul A.; Cuddy, David T.; Leung, Kon S.; Kwoun, Oh-Ig; Crichton, Dan; Freeborn, Dana

    2011-01-01

    The proposed NASA Deformation, Ecosystem Structure and Dynamics of Ice (DESDynI) mission would be a first-of-breed endeavor that would fundamentally change the paradigm by which Earth Science data systems at NASA are built. DESDynI is evaluating a distributed architecture where expert science nodes around the country all engage in some form of mission processing and data archiving. This is compared to the traditional NASA Earth Science missions where the science processing is typically centralized. What's more, DESDynI is poised to profoundly increase the amount of data collection and processing well into the 5 terabyte/day and tens of thousands of job range, both of which comprise a tremendous challenge to DESDynI's proposed distributed data system architecture. In this paper, we report on a set of architectural trade studies and benchmarks meant to inform the DESDynI mission and the broader community of the impacts of these unprecedented requirements. In particular, we evaluate the benefits of cloud computing and its integration with our existing NASA ground data system software called Apache Object Oriented Data Technology (OODT). The preliminary conclusions of our study suggest that the use of the cloud and OODT together synergistically form an effective, efficient and extensible combination that could meet the challenges of NASA science missions requiring DESDynI-like data collection and processing volumes at reduced costs.

  3. Evaluating Cloud Computing in the Proposed NASA DESDynI Ground Data System

    Science.gov (United States)

    Tran, John J.; Cinquini, Luca; Mattmann, Chris A.; Zimdars, Paul A.; Cuddy, David T.; Leung, Kon S.; Kwoun, Oh-Ig; Crichton, Dan; Freeborn, Dana

    2011-01-01

    The proposed NASA Deformation, Ecosystem Structure and Dynamics of Ice (DESDynI) mission would be a first-of-breed endeavor that would fundamentally change the paradigm by which Earth Science data systems at NASA are built. DESDynI is evaluating a distributed architecture where expert science nodes around the country all engage in some form of mission processing and data archiving. This is compared to the traditional NASA Earth Science missions where the science processing is typically centralized. What's more, DESDynI is poised to profoundly increase the amount of data collection and processing well into the 5 terabyte/day and tens of thousands of job range, both of which comprise a tremendous challenge to DESDynI's proposed distributed data system architecture. In this paper, we report on a set of architectural trade studies and benchmarks meant to inform the DESDynI mission and the broader community of the impacts of these unprecedented requirements. In particular, we evaluate the benefits of cloud computing and its integration with our existing NASA ground data system software called Apache Object Oriented Data Technology (OODT). The preliminary conclusions of our study suggest that the use of the cloud and OODT together synergistically form an effective, efficient and extensible combination that could meet the challenges of NASA science missions requiring DESDynI-like data collection and processing volumes at reduced costs.

  4. A multi-Agent system architecture for geographic information gathering

    Institute of Scientific and Technical Information of China (English)

    高刚毅; 王申康

    2004-01-01

    World Wide Web(WWW)is a vast repository of information,including a great deal of geographic information.But the location and retrieval of geographic information will require a significant amount of time and effort. In addition,different users usually have different views and interests in the same information. To resolve such problems,this paper first proposed a model of geographic information gathering based on multi-Agent(MA)architecture. Then based on this model,we construct a prototype system with GML(Geography Markup Language). This system consists of three tiers-Client,Web Server and Data Resource. Finally,we expatiate on the process of Web Server.

  5. Architecture for Combined Energy and Attitude Control System

    Directory of Open Access Journals (Sweden)

    Ibrahim M. Mehedi

    2005-01-01

    Full Text Available Combining the energy and attitude control system is a feasible technology for small satellites to improve the space missions. In this Combined Energy and Attitude Control System (CEACS a double rotating flywheel is used to replace the conventional battery for energy storage as well as to control the attitude of an earth oriented satellite. Each flywheel is to be controlled in the torque mode. The energy and attitude inputs for the flywheels' control architecture are also in the torque mode. All related mathematical representation along with the relevant transfer functions and the required numerical calculation are developed. The goals are to analyze the attitude performance with respect to the ideal and non-ideal test cases for a chosen reference mission.

  6. Reverse Launch Abort System Parachute Architecture Trade Study

    Science.gov (United States)

    Litton, Daniel K.; O'Keefe, Stephen A.; Winski, Richard G.

    2011-01-01

    This study investigated a potential Launch Abort System (LAS) Concept of Operations and abort parachute architecture. The purpose of the study was to look at the concept of jettisoning the LAS tower forward (Reverse LAS or RLAS) into the free-stream flow rather than after reorienting to a heatshield forward orientation. A hypothesized benefit was that due to the compressed timeline the dynamic pressure at main line stretch would be substantially less. This would enable the entry parachutes to be designed and sized based on entry loading conditions rather than the current stressing case of a Pad Abort. Ultimately, concerns about the highly dynamic reorientation of the CM via parachutes, and the additional requirement of a triple bridle attachment for the RLAS parachute system, overshadowed the potential benefits and ended this effort.

  7. Devonian lacustrine shore zone architecture: giving perspective to cliff exposures with ground penetrating radar

    DEFF Research Database (Denmark)

    Andrews, Steven D.; Moreau, Julien; Archer, Stuart

    . However, this depositional environment ought to be relatively dynamic with sand body migration and erosions. In addition, along the coastal cliffs, the exposures are mainly on the same strike direction. To better understand the peculiar shore zone system, we carried out very high resolution sedimentary...

  8. New Algorithm for FMS Scheduling Based on Multiagent System Architecture

    Institute of Scientific and Technical Information of China (English)

    Li Gaozheng; Huang Xiaoping; Ding Han

    2001-01-01

    Redefined benefit-driven function is used to study the dynamic scheduling of FMS based on multiagent architecture. Each agent is dedicated to a work center, i.e. a set of the manufacturing system. In one hand, each agent selects locally and dynamically the dispatching rule(DR) that seems to be most suited to the operating conditions, production objectives and current shop status. On the other hand, each task should bring certain amount of benefit for the manufacturer. So, it is reasonable to have the dynamic scheduling of FMS relying upon multiagent architecture using the benefit-driven function as a strategy. Well, today's manufacturing corporation, especially the high & new technology one and deep machining one, the cost of their products is mainly determined by how much the knowledge is input From this viewpoint, we redefined the benefit-driven function. In the end, this approach is compared with other existing DRs on a job-shop problem, already used in other research works.

  9. Architecture and key technologies of grid geographic information system

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The highly efficient and stable collaborative computation platform for geospatial information can be constructed on the basis of Grid computing technology,com-bined with Peer-to-Peer (P2P) computing technology and geospatial database technology. This paper proposed the architecture and key technologies of the Grid GIS (Geographic Information System) incorporated with P2P structure,and corre-spondingly a Grid GIS prototype named Nebula was designed and then imple-mented. Nebula is a suite of middleware for geospatial Grid computing,which could be deployed onto various service nodes in network. Based on Grid protocols and infrastructure,Nebula provides invocation interfaces to users in form of Grid services. By using P2P message based communication mechanism,complex geospatial computation tasks could be accomplished by Nebula in a collaborative way. This paper introduced Nebula’s architecture and key modules,and according to experimental data,we discussed the Grid GIS’s advantages,application scenar-ios and future directions.

  10. A New Indoor Positioning System Architecture Using GPS Signals

    Directory of Open Access Journals (Sweden)

    Rui Xu

    2015-04-01

    Full Text Available The pseudolite system is a good alternative for indoor positioning systems due to its large coverage area and accurate positioning solution. However, for common Global Positioning System (GPS receivers, the pseudolite system requires some modifications of the user terminals. To solve the problem, this paper proposes a new pseudolite-based indoor positioning system architecture. The main idea is to receive real-world GPS signals, repeat each satellite signal and transmit those using indoor transmitting antennas. The transmitted GPS-like signal can be processed (signal acquisition and tracking, navigation data decoding by the general receiver and thus no hardware-level modification on the receiver is required. In addition, all Tx can be synchronized with each other since one single clock is used in Rx/Tx. The proposed system is simulated using a software GPS receiver. The simulation results show the indoor positioning system is able to provide high accurate horizontal positioning in both static and dynamic situations.

  11. Ground Optical Signal Processing Architecture for Contributing Space-Based SSA Sensor Data

    Science.gov (United States)

    2014-09-01

    display a currently valid OMB control number. 1. REPORT DATE SEP 2014 2. REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND...Propagation (Both sensor and target) Sensor/Target State Vectors & Target Radiometric Properties Millennium Space Systems Tasker/Scheduler...capability of converting visual magnitudes to radiometric quantities. However, since the model covers the full range of light (from UV through VLWIR) a

  12. An architecture and protocol for communications satellite constellations regarded as multi-agent systems

    Science.gov (United States)

    Lindley, Craig A.

    1995-05-01

    This paper presents an architecture for satellites regarded as intercommunicating agents. The architecture is based upon a postmodern paradigm of artificial intelligence in which represented knowledge is regarded as text, inference procedures are regarded as social discourse and decision making conventions and the semantics of representations are grounded in the situated behaviour and activity of agents. A particular protocol is described for agent participation in distributed search and retrieval operations conducted as joint activities.

  13. An architecture and protocol for communications satellite constellations regarded as multi-agent systems

    Science.gov (United States)

    Lindley, Craig A.

    1995-01-01

    This paper presents an architecture for satellites regarded as intercommunicating agents. The architecture is based upon a postmodern paradigm of artificial intelligence in which represented knowledge is regarded as text, inference procedures are regarded as social discourse and decision making conventions and the semantics of representations are grounded in the situated behaviour and activity of agents. A particular protocol is described for agent participation in distributed search and retrieval operations conducted as joint activities.

  14. Devonian lacustrine shore zone architecture: giving perspective to cliff exposures with ground penetrating radar

    DEFF Research Database (Denmark)

    Andrews, Steven D.; Moreau, Julien; Archer, Stuart

    of these units. The cycles are on average 16-m-thick and comprise deep lake, perennial lake and playa facies. The shore zone facies reaches 2 to 3.5 m in thickness and is found within the playa facies. On the exposures, the shore zone facies seems to be aggrading with most of the layers apparently subhorizontal...... occurred over a wide area as the lake margin migrated back and forth, and gradually transgressed. Continued transgression forced fluvial systems back towards the basin margin....

  15. SPARCL: a high-altitude tethered balloon-based optical space-to-ground communication system

    Science.gov (United States)

    Badesha, Surjit S.

    2002-12-01

    The Johns Hopkins University Applied Physics Laboratory (JHU/APL) has conducted a feasibility study to determine if a high altitude (20 km) tethered balloon-based space-to-ground optical communication system is a feasible concept. To support this effort, a detailed concept definition was developed and associated issues were identified and analyzed systematically. Of all the adverse atmospheric phenomena, cloud coverage was identified as the most prohibitive obstacle for a space-to-ground optical communication link. However, by placing a receiver on a balloon at a 20 km altitude, the proposed high altitude system avoids virtually all atmospheric effects. A practical notional scenario was developed (i.e. surveillance and/or reconnaissance of a regional conflict) involving end-to-end optical communication architecture to identify system elements, system level requirements, and to quantify realistic data rate requirements. Analysis of the proposed space-to-ground communication elements indicates that while significant development is required, the system is technically feasible and is a very cost effective 24/7solution.

  16. Architecture and Hardware Design of Lossless Compression Algorithms for Direct-Write Maskless Lithography Systems

    Science.gov (United States)

    2010-04-29

    system using 22 nm pixels for 45 nm technology, a data rate of 12 Tb/s is required. A recently proposed datapath architecture for direct-write...for 45 nm technology, a data rate of 12 Tb/s is required. A recently pro- posed datapath architecture for direct-write lithography systems shows that...1 1.2 The Architecture of Maskless Lithography Systems . . . . . . . . . . . . . . 2 1.3 Datapath Implementation of

  17. Equivalence of the Symbol Grounding and Quantum System Identification Problems

    Directory of Open Access Journals (Sweden)

    Chris Fields

    2014-02-01

    Full Text Available The symbol grounding problem is the problem of specifying a semantics for the representations employed by a physical symbol system in a way that is neither circular nor regressive. The quantum system identification problem is the problem of relating observational outcomes to specific collections of physical degrees of freedom, i.e., to specific Hilbert spaces. It is shown that with reasonable physical assumptions these problems are equivalent. As the quantum system identification problem is demonstrably unsolvable by finite means, the symbol grounding problem is similarly unsolvable.

  18. A Quarter Active Suspension System Based Ground-Hook Controller

    Directory of Open Access Journals (Sweden)

    Turnip Arjon

    2016-01-01

    Full Text Available An alternative design technique for active suspension system of vehicle using a developved ground-hook damping system as a reference is proposed. The controller parameters are determined using Lyapunov method and can be tuned to precisely achieve the type of desired response which given by reference model. The simulation result show that the designed active suspension system based ground-hook reference model is able to significantly improve the ride comfort and the road holding compared with semi-active suspension.

  19. System Architecture Design for Electric Vehicle (EV) Systems

    DEFF Research Database (Denmark)

    Xu, Zhao; Wu, Qiuwei; Nielsen, Arne Hejde

    2010-01-01

    The electric vehicle (EV) system should fulfill the energy needs of EVs to meet the EV users’ driving requirements and enable the system service from EVs to support the power system operation with high penetration of renewable energy resources (RES) by providing necessary infrastructures. In order...... to realize the functionalities of the EV system, a three‐level conceptual EV system has been proposed. The proposed conceptual model comprises the three listed levels.    management/control level  information/communication level  physical level.   The control/management level is dealing with local control...

  20. Space Telecommunications Radio System (STRS) Architecture Standard. Release 1.02.1

    Science.gov (United States)

    Reinhart, Richard C.; Kacpura, Thomas J.; Handler, Louis M.; Hall, C. Steve; Mortensen, Dale J.; Johnson, Sandra K.; Briones, Janette C.; Nappier, Jennifer M.; Downey, Joseph A.; Lux, James P.

    2012-01-01

    This document contains the NASA architecture standard for software defined radios used in space- and ground-based platforms to enable commonality among radio developments to enhance capability and services while reducing mission and programmatic risk. Transceivers (or transponders) with functionality primarily defined in software (e.g., firmware) have the ability to change their functional behavior through software alone. This radio architecture standard offers value by employing common waveform software interfaces, method of instantiation, operation, and testing among different compliant hardware and software products. These common interfaces within the architecture abstract application software from the underlying hardware to enable technology insertion independently at either the software or hardware layer.

  1. X-band uplink ground systems development

    Science.gov (United States)

    Hartop, R.; Johns, C.; Kolbly, R.

    1980-04-01

    The design of an X-band exciter and transmitter control system is presented. For the exciter design such aspects as the block diagram, expected oscillator frequency stability, effect of instability of the cables between the control room and the antenna, improvement in uplink stability obtained with the transmitter phase control loop, expected frequency stability of exciter references for the doppler extractors, expected performance of the X-band range modulator, and the frequency stability improvement to be obtained with temperature control of the hardware environment are covered.

  2. A Security Analysis of Cyber-Physical Systems Architecture for Healthcare

    Directory of Open Access Journals (Sweden)

    Darren Seifert

    2016-10-01

    Full Text Available This paper surveys the available system architectures for cyber-physical systems. Several candidate architectures are examined using a series of essential qualities for cyber-physical systems for healthcare. Next, diagrams detailing the expected functionality of infusion pumps in two of the architectures are analyzed. The STRIDE Threat Model is then used to decompose each to determine possible security issues and how they can be addressed. Finally, a comparison of the major security issues in each architecture is presented to help determine which is most adaptable to meet the security needs of cyber-physical systems in healthcare.

  3. SAMS--a systems architecture for developing intelligent health information systems.

    Science.gov (United States)

    Yılmaz, Özgün; Erdur, Rıza Cenk; Türksever, Mustafa

    2013-12-01

    In this paper, SAMS, a novel health information system architecture for developing intelligent health information systems is proposed and also some strategies for developing such systems are discussed. The systems fulfilling this architecture will be able to store electronic health records of the patients using OWL ontologies, share patient records among different hospitals and provide physicians expertise to assist them in making decisions. The system is intelligent because it is rule-based, makes use of rule-based reasoning and has the ability to learn and evolve itself. The learning capability is provided by extracting rules from previously given decisions by the physicians and then adding the extracted rules to the system. The proposed system is novel and original in all of these aspects. As a case study, a system is implemented conforming to SAMS architecture for use by dentists in the dental domain. The use of the developed system is described with a scenario. For evaluation, the developed dental information system will be used and tried by a group of dentists. The development of this system proves the applicability of SAMS architecture. By getting decision support from a system derived from this architecture, the cognitive gap between experienced and inexperienced physicians can be compensated. Thus, patient satisfaction can be achieved, inexperienced physicians are supported in decision making and the personnel can improve their knowledge. A physician can diagnose a case, which he/she has never diagnosed before, using this system. With the help of this system, it will be possible to store general domain knowledge in this system and the personnel's need to medical guideline documents will be reduced.

  4. Photo-active collagen systems with controlled triple helix architecture

    CERN Document Server

    Tronci, Giuseppe; Wood, David J

    2013-01-01

    The design of photo-active collagen systems is presented as a basis for establishing biomimetic materials with varied network architecture and programmable macroscopic properties. Following in-house isolation of type I collagen, reaction with vinyl-bearing compounds of varied backbone rigidity, i.e. 4-vinylbenzyl chloride (4VBC) and glycidyl methacrylate (GMA), was carried out. TNBS colorimetric assay, 1H-NMR and ATR-FTIR confirmed covalent and tunable functionalization of collagen lysines. Depending on the type and extent of functionalization, controlled stability and thermal denaturation of triple helices were observed via circular dichroism (CD), whereby the hydrogen-bonding capability of introduced moieties was shown to play a major role. Full gel formation was observed following photo-activation of functionalized collagen solutions. The presence of a covalent network only slightly affected collagen triple helix conformation (as observed by WAXS and ATR-FTIR), confirming the structural organization of fun...

  5. From User Interface Usability to the Overall Usability of Interactive Systems: Adding Usability in System Architecture

    Science.gov (United States)

    Taleb, Mohamed; Seffah, Ahmed; Engleberg, Daniel

    Traditional interactive system architectures such as MVC and PAC decompose the system into subsystems that are relatively independent, thereby allowing the design work to be partitioned between the user interfaces and underlying functionalities. Such architectures extend the independence assumption to usability, approaching the design of the user interface as a subsystem that can be designed and tested independently from the underlying functionality. This Cartesian dichotomy can be fallacious, as functionalities buried in the application’s logic can sometimes affect the usability of the system. Our investigations model the relationships between internal software attributes and externally visible usability factors. We propose a pattern-based approach for dealing with these relationships. We conclude by discussing how these patterns can lead to a methodological framework for improving interactive system architec-tures, and how these patterns can support the integration of usability in the software design process.

  6. 30 CFR 75.803 - Fail safe ground check circuits on high-voltage resistance grounded systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fail safe ground check circuits on high-voltage resistance grounded systems. 75.803 Section 75.803 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... High-Voltage Distribution § 75.803 Fail safe ground check circuits on high-voltage resistance...

  7. Architectural Prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...

  8. Architectural prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...

  9. Ground Source Heat Pump in Heating System with Electronics Monitoring

    Directory of Open Access Journals (Sweden)

    NEAMŢU Ovidiu

    2013-10-01

    Full Text Available The monitoring system is implemented for a ground coupled heat pump in heating/ system. The borehole heat exchangers – which are 150 m long - are filled with a mixture of water and ethilene glycol calledbrine. Metering and monitoring energy consumption is achieved for: heat pump, circulation pumps, additional electrical heating, hot air ventilation systems, control systems with sensors: analog and smart sensors. Instantaneous values are stored in a local computer.

  10. L-Band System Engineering - Concepts of Use, Systems Performance Requirements, and Architecture

    Science.gov (United States)

    Henriksen, Stephen; Zelkin, Natalie

    2011-01-01

    This document is being provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-band and L-band Communications Standard Development. Task 7 was motivated by the five year technology assessment performed for the Federal Aviation Administration (FAA) under the joint FAA-EUROCONTROL cooperative research Action Plan (AP-17), also known as the Future Communications Study (FCS). It was based on direction provided by the FAA project-level agreement (PLA FY09_G1M.02-02v1) for "New ATM Requirements-Future Communications." Task 7 was separated into two distinct subtasks, each aligned with specific work elements and deliverable items. Subtask 7-1 addressed C-band airport surface data communications standards development, systems engineering, test bed development, and tests/demonstrations to establish operational capability for what is now referred to as the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2, which is the subject of this report, focused on preliminary systems engineering and support of joint FAA/EUROCONTROL development and evaluation of a future L-band (960 to 1164 MHz) air/ground (A/G) communication system known as the L-band digital aeronautical communications system (L-DACS), which was defined during the FCS. The proposed L-DACS will be capable of providing ATM services in continental airspace in the 2020+ timeframe. Subtask 7-2 was performed in two phases. Phase I featured development of Concepts of Use, high level functional analyses, performance of initial L-band system safety and security risk assessments, and development of high level requirements and architectures. It also included the aforementioned support of joint L-DACS development and evaluation, including inputs to L-DACS design specifications. Phase II provided a refinement of the systems engineering activities performed during Phase I, along

  11. The Interim : until you achieve an operationally responsive ground system

    Science.gov (United States)

    Wendlandt, Bob; Clarke, Kelly; Lei, Jordan; Miyamoto, Charles; Owen-Mankovich, Kyran

    2008-01-01

    Everyone wants to achieve a 'Responsive' Ground Data System (GDS), but that takes time. What do you do in the interim? Our group, called the Integration, Test and Deployment Team (ITD), is a group of responsive engineers whose primary focus is to assist JPL projects to successfully adapt, test, integrate and deploy their ground data system. The team configures and adapts the GDS for a project, so that analysts, engineers and scientist do not need to be experts in the GDS to operate it. The team has developed a human interface to accommodate all types of users. It provides Graphical User Interfaces (GUI's) for those that want GUI's, command line interfaces for those that want control, and selection button interfaces for other users. The cornerstone of a responsive Ground Data System is responsive people. Without individuals who can be aware of a project's changing needs and requirements, how can the GDS become responsive

  12. Architectures: Design patterns for component-based systems

    OpenAIRE

    Bliudze, Simon

    2014-01-01

    Architectures depict design principles, paradigms that can be understood by all, allow thinking on a higher plane and avoiding low-level mistakes. They provide means for ensuring correctness by construction by enforcing global properties characterizing the coordination between components. An architecture can be considered as an operator A that, applied to a set of components B, builds a composite component A(B) meeting a characteristic property P. A theory of architectures must address sever...

  13. An OFDM System Using Polyphase Filter and DFT Architecture for Very High Data Rate Applications

    Science.gov (United States)

    Kifle, Muli; Andro, Monty; Vanderaar, Mark J.

    2001-01-01

    This paper presents a conceptual architectural design of a four-channel Orthogonal Frequency Division Multiplexing (OFDM) system with an aggregate information throughput of 622 megabits per second (Mbps). Primary emphasis is placed on the generation and detection of the composite waveform using polyphase filter and Discrete Fourier Transform (DFT) approaches to digitally stack and bandlimit the individual carriers. The four-channel approach enables the implementation of a system that can be both power and bandwidth efficient, yet enough parallelism exists to meet higher data rate goals. It also enables a DC power efficient transmitter that is suitable for on-board satellite systems, and a moderately complex receiver that is suitable for low-cost ground terminals. The major advantage of the system as compared to a single channel system is lower complexity and DC power consumption. This is because the highest sample rate is half that of the single channel system and synchronization can occur at most, depending on the synchronization technique, a quarter of the rate of a single channel system. The major disadvantage is the increased peak-to-average power ratio over the single channel system. Simulation results in a form of bit-error-rate (BER) curves are presented in this paper.

  14. PELS: A Noble Architecture and Framework for a Personal E-Learning System (PELS)

    Science.gov (United States)

    Dewan, Jahangir; Chowdhury, Morshed; Batten, Lynn

    2014-01-01

    This article presents a personal e-learning system architecture in the context of a social network environment. The main objective of a personal e-learning system is to develop individual skills on a specific subject and share resources with peers. The authors' system architecture defines the organisation and management of a personal learning…

  15. A system architecture for holonic manufacturing planning and control (EtoPlan)

    NARCIS (Netherlands)

    Wullink, Gerhard; Giebels, M.M.T.; Kals, H.J.J.

    2002-01-01

    In this paper, we present the system architecture of a flexible manufacturing planning and control system, named EtoPlan. The concept is based on the holonic control approach of building multiple and temporary hierarchies (holarchies). This paper describes the system architecture for flexible

  16. From scientific instrument to industrial machine : Coping with architectural stress in embedded systems

    NARCIS (Netherlands)

    Doornbos, R.; Loo, S. van

    2012-01-01

    Architectural stress is the inability of a system design to respond to new market demands. It is an important yet often concealed issue in high tech systems. In From scientific instrument to industrial machine, we look at the phenomenon of architectural stress in embedded systems in the context of a

  17. PELS: A Noble Architecture and Framework for a Personal E-Learning System (PELS)

    Science.gov (United States)

    Dewan, Jahangir; Chowdhury, Morshed; Batten, Lynn

    2014-01-01

    This article presents a personal e-learning system architecture in the context of a social network environment. The main objective of a personal e-learning system is to develop individual skills on a specific subject and share resources with peers. The authors' system architecture defines the organisation and management of a personal learning…

  18. Evaluation of power conditioning architectures for energy production enhancement in thermoelectric generator systems

    DEFF Research Database (Denmark)

    Wu, Hongfei; Sun, Kai; Chen, Min

    2014-01-01

    A large-scale thermoelectric generator (TEG) system has an unbalanced temperature distribution among the TEG modules, which leads to power mismatch among the modules and decreases the power output of the TEG system. To maximize the power output and minimize the power conversion loss, a centralized......- distributed hybrid power conditioning architecture is presented, analyzed, and evaluated for a TEG system. The novel architecture is a combination of a conventional centralized architecture and a fully distributed architecture. By using the proposed architecture, most of the harvested power is processed...... of implementing high MPPT efficiency and high conversion efficiency simultaneously. A 50-W TEG system composed of two TEG modules is built and tested. Experimental results show that the proposed hybrid power conditioning architecture generates up to 5% more energy for a temperature difference between the two...

  19. From Principles to Details: Integrated Framework for Architecture Modelling of Large Scale Software Systems

    Directory of Open Access Journals (Sweden)

    Andrzej Zalewski

    2013-06-01

    Full Text Available There exist numerous models of software architecture (box models, ADL’s, UML, architectural decisions, architecture modelling frameworks (views, enterprise architecture frameworks and even standards recommending practice for the architectural description. We show in this paper, that there is still a gap between these rather abstract frameworks/standards and existing architecture models. Frameworks and standards define what should be modelled rather than which models should be used and how these models are related to each other. We intend to prove that a less abstract modelling framework is needed for the effective modelling of large scale software intensive systems. It should provide a more precise guidance kinds of models to be employed and how they should relate to each other. The paper defines principles that can serve as base for an integrated model. Finally, structure of such a model has been proposed. It comprises three layers: the upper one – architectural policy – reflects corporate policy and strategies in architectural terms, the middle one –system organisation pattern – represents the core structural concepts and their rationale at a given level of scope, the lower one contains detailed architecture models. Architectural decisions play an important role here: they model the core architectural concepts explaining detailed models as well as organise the entire integrated model and the relations between its submodels.

  20. An energy-efficient architecture for internet of things systems

    Science.gov (United States)

    De Rango, Floriano; Barletta, Domenico; Imbrogno, Alessandro

    2016-05-01

    In this paper some of the motivations for energy-efficient communications in wireless systems are described by highlighting emerging trends and identifying some challenges that need to be addressed to enable novel, scalable and energy-efficient communications. So an architecture for Internet of Things systems is presented, the purpose of which is to minimize energy consumption by communication devices, protocols, networks, end-user systems and data centers. Some electrical devices have been designed with multiple communication interfaces, such as RF or WiFi, using open source technology; they have been analyzed under different working conditions. Some devices are programmed to communicate directly with a web server, others to communicate only with a special device that acts as a bridge between some devices and the web server. Communication parameters and device status have been changed dynamically according to different scenarios in order to have the most benefits in terms of energy cost and battery lifetime. So the way devices communicate with the web server or between each other and the way they try to obtain the information they need to be always up to date change dynamically in order to guarantee always the lowest energy consumption, a long lasting battery lifetime, the fastest responses and feedbacks and the best quality of service and communication for end users and inner devices of the system.

  1. Systems Architectures for a Tactical Naval Command and Control System

    Science.gov (United States)

    2009-03-01

    assembly of the simpler portions of the problem [ Descartes , 1850: 61]. This thesis dissects the complex engineering process of naval tactical command...Clausewitz presents include courage, strength of body and soul, intelligence, coup d’oeil, determination, energy of action, staunchness, endurance...for the systems engineer will have a fault tolerance placeholder in their mind when defining system functions. Protect Information is removed as a

  2. Structural factors of solar system cluster ground coupled storage rationalization

    Directory of Open Access Journals (Sweden)

    Viktor V. Wysochin

    2015-12-01

    Full Text Available The computational investigations of unsteady heat transfer in seasonal solar heat storage system were conducted. This storage system consists of nine ground heat exchangers. The investigations were made for periodical diurnal cycle charging during summer season. The heat exchanger is presented as vertical probe with concentric tubes arrangement. Aim: The aim of the work is the optimization of cluster ground coupled storage – the probes quantity in cluster, their lengths and interval – using high precision mathematical model. Materials and Methods: The mathematical model of conjugate solar system functioning and ground coupled storage involves differential equations describing the incoming and conversion of solar energy in solar collector. Also it includes the heat exchange in ground heat exchangers and three-dimensional soil mass. Results: The need of mutual influence accounting of the solar collector and the ground heat exchanger size ranges is shown. One more thing – capability of effectiveness improvement of the collector based on reasonable step size selection for cluster and selection of active heat exchangers quantity in requisite construction. Conclusions: The recommendations for organization of heat exchangers of the collector work are offered. The five-probe structure is the most effective one for cluster arrangement of seasonal heat storage. The recommended interval between probes is 4 meters.

  3. Hierarchical neural network model of the visual system determining figure/ground relation

    Science.gov (United States)

    Kikuchi, Masayuki

    2017-07-01

    One of the most important functions of the visual perception in the brain is figure/ground interpretation from input images. Figural region in 2D image corresponding to object in 3D space are distinguished from background region extended behind the object. Previously the author proposed a neural network model of figure/ground separation constructed on the standpoint that local geometric features such as curvatures and outer angles at corners are extracted and propagated along input contour in a single layer network (Kikuchi & Akashi, 2001). However, such a processing principle has the defect that signal propagation requires manyiterations despite the fact that actual visual system determines figure/ground relation within the short period (Zhou et al., 2000). In order to attain speed-up for determining figure/ground, this study incorporates hierarchical architecture into the previous model. This study confirmed the effect of the hierarchization as for the computation time by simulation. As the number of layers increased, the required computation time reduced. However, such speed-up effect was saturatedas the layers increased to some extent. This study attempted to explain this saturation effect by the notion of average distance between vertices in the area of complex network, and succeeded to mimic the saturation effect by computer simulation.

  4. Architecture and life support systems for a rotating space habitat

    Science.gov (United States)

    Misra, Gaurav

    Life Support Systems are critical to sustain human habitation of space over long time periods. As orbiting space habitats become operational in the future, support systems such as atmo-sphere, food, water etc. will play a very pivotal role in sustaining life. To design a long-duration space habitat, it's important to consider the full gamut of human experience of the environment. Long-term viability depends on much more than just the structural or life support efficiency. A space habitat isn't just a machine; it's a life experience. To be viable, it needs to keep the inhabitants satisfied with their condition. This paper provides conceptual research on several key factors that influence the growth and sustainability of humans in a space habitat. Apart from the main life support system parameters, the architecture (both interior and exterior) of the habitat will play a crucial role in influencing the liveability in the space habitat. In order to ensure the best possible liveability for the inhabitants, a truncated (half cut) torus is proposed as the shape of the habitat. This structure rotating at an optimum rpm will en-sure 1g pseudo gravity to the inhabitants. The truncated torus design has several advantages over other proposed shapes such as a cylinder or a sphere. The design provides minimal grav-ity variation (delta g) in the living area, since its flat outer pole ensures a constant gravity. The design is superior in economy of structural and atmospheric mass. Interior architecture of the habitat addresses the total built environment, drawing from diverse disciplines includ-ing physiology, psychology, and sociology. Furthermore, factors such as line of sight, natural sunlight and overhead clearance have been discussed in the interior architecture. Substantial radiation shielding is also required in order to prevent harmful cosmic radiations and solar flares from causing damage to inhabitants. Regolith shielding of 10 tons per meter square is proposed for the

  5. Modelling production system architectures in the early phases of product development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir; Martin Ravn, Poul; Mortensen, Niels Henrik;

    2016-01-01

    on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...... and adjusted to fit the modelling requirements of a production system architecture at an early phase of development. The production system architecture models capture and describe the structure, capabilities and expansions of the production system architecture underdevelopment. The production system...

  6. Probing quantum frustrated systems via factorization of the ground state.

    Science.gov (United States)

    Giampaolo, Salvatore M; Adesso, Gerardo; Illuminati, Fabrizio

    2010-05-21

    The existence of definite orders in frustrated quantum systems is related rigorously to the occurrence of fully factorized ground states below a threshold value of the frustration. Ground-state separability thus provides a natural measure of frustration: strongly frustrated systems are those that cannot accommodate for classical-like solutions. The exact form of the factorized ground states and the critical frustration are determined for various classes of nonexactly solvable spin models with different spatial ranges of the interactions. For weak frustration, the existence of disentangling transitions determines the range of applicability of mean-field descriptions in biological and physical problems such as stochastic gene expression and the stability of long-period modulated structures.

  7. Integrated Display and Environmental Awareness System - System Architecture Definition

    Science.gov (United States)

    Doule, Ondrej; Miranda, David; Hochstadt, Jake

    2017-01-01

    The Integrated Display and Environmental Awareness System (IDEAS) is an interdisciplinary team project focusing on the development of a wearable computer and Head Mounted Display (HMD) based on Commercial-Off-The-Shelf (COTS) components for the specific application and needs of NASA technicians, engineers and astronauts. Wearable computers are on the verge of utilization trials in daily life as well as industrial environments. The first civil and COTS wearable head mounted display systems were introduced just a few years ago and they probed not only technology readiness in terms of performance, endurance, miniaturization, operability and usefulness but also maturity of practice in perspective of a socio-technical context. Although the main technical hurdles such as mass and power were addressed as improvements on the technical side, the usefulness, practicality and social acceptance were often noted on the side of a broad variety of humans' operations. In other words, although the technology made a giant leap, its use and efficiency still looks for the sweet spot. The first IDEAS project started in January 2015 and was concluded in January 2017. The project identified current COTS systems' capability at minimum cost and maximum applicability and brought about important strategic concepts that will serve further IDEAS-like system development.

  8. Systems budgets architecture and development for the Maunakea Spectroscopic Explorer

    Science.gov (United States)

    Mignot, Shan; Flagey, Nicolas; Szeto, Kei; Murowinski, Rick; McConnachie, Alan

    2016-08-01

    The Maunakea Spectroscopic Explorer (MSE) project is an enterprise to upgrade the existing Canada-France- Hawaii observatory into a spectroscopic facility based on a 10 meter-class telescope. As such, the project relies on engineering requirements not limited only to its instruments (the low, medium and high resolution spectrographs) but for the whole observatory. The science requirements, the operations concept, the project management and the applicable regulations are the basis from which these requirements are initially derived, yet they do not form hierarchies as each may serve several purposes, that is, pertain to several budgets. Completeness and consistency are hence the main systems engineering challenges for such a large project as MSE. Special attention is devoted to ensuring the traceability of requirements via parametric models, derivation documents, simulations, and finally maintaining KAOS diagrams and a database under IBM Rational DOORS linking them together. This paper will present the architecture of the main budgets under development and the associated processes, expand to highlight those that are interrelated and how the system, as a whole, is then optimized by modelling and analysis of the pertinent system parameters.

  9. High Performance Storage System Scalability: Architecture, Implementation, and Experience

    Energy Technology Data Exchange (ETDEWEB)

    Watson, R W

    2005-01-05

    The High Performance Storage System (HPSS) provides scalable hierarchical storage management (HSM), archive, and file system services. Its design, implementation and current dominant use are focused on HSM and archive services. It is also a general-purpose, global, shared, parallel file system, potentially useful in other application domains. When HPSS design and implementation began over a decade ago, scientific computing power and storage capabilities at a site, such as a DOE national laboratory, was measured in a few 10s of gigaops, data archived in HSMs in a few 10s of terabytes at most, data throughput rates to an HSM in a few megabytes/s, and daily throughput with the HSM in a few gigabytes/day. At that time, the DOE national laboratories and IBM HPSS design team recognized that we were headed for a data storage explosion driven by computing power rising to teraops/petaops requiring data stored in HSMs to rise to petabytes and beyond, data transfer rates with the HSM to rise to gigabytes/s and higher, and daily throughput with a HSM in 10s of terabytes/day. This paper discusses HPSS architectural, implementation and deployment experiences that contributed to its success in meeting the above orders of magnitude scaling targets. We also discuss areas that need additional attention as we continue significant scaling into the future.

  10. Ground-Based Calibration Of A Microwave Landing System

    Science.gov (United States)

    Kiriazes, John J.; Scott, Marshall M., Jr.; Willis, Alfred D.; Erdogan, Temel; Reyes, Rolando

    1996-01-01

    System of microwave instrumentation and data-processing equipment developed to enable ground-based calibration of microwave scanning-beam landing system (MSBLS) at distances of about 500 to 1,000 ft from MSBLS transmitting antenna. Ensures accuracy of MSBLS near touchdown point, without having to resort to expense and complex logistics of aircraft-based testing. Modified versions prove useful in calibrating aircraft instrument landing systems.

  11. 0{sup +} ground state dominance in many-body systems

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Yu-Min [Southeast Univ., Dept. of Physics, Nanjing (China); Arima, Akito [The House of Councilors, Tokyo (Japan); Yoshinaga, Naotaka [Saitama Univ., Physics Dept., Saitama (Japan)

    2002-12-01

    We propose a simple approach to predict the angular momentum I ground states (Ig.s.) probabilities of many-body systems without diagonalization of the hamiltonian using random interactions. It is suggested that the 0g.s. dominance in boson systems and even valence nucleon systems is not given by the model space as previously assumed, but by specific two-body interactions. (author)

  12. Ground Source Geothermal District Heating and Cooling System

    Energy Technology Data Exchange (ETDEWEB)

    Lowe, James William [Ball State Univ., Muncie, IN (United States)

    2016-10-21

    Ball State University converted its campus from a coal-fired steam boiler district heating system to a ground source heat pump geothermal district system that produces simultaneously hot water for heating and chilled water for cooling. This system will include the installation of 3,600 four hundred feet deep vertical closed loop boreholes making it the largest ground source geothermal district system in the country. The boreholes will act as heat exchangers and transfer heat by virtue of the earth’s ability to maintain an average temperature of 55 degree Fahrenheit. With growing international concern for global warming and the need to reduce worldwide carbon dioxide loading of the atmosphere geothermal is poised to provide the means to help reduce carbon dioxide emissions. The shift from burning coal to utilizing ground source geothermal will increase electrical consumption but an overall decrease in energy use and reduction in carbon dioxide output will be achieved. This achievement is a result of coupling the ground source geothermal boreholes with large heat pump chiller technology. The system provides the thermodynamic means to move large amounts of energy with limited energy input. Ball State University: http://cms.bsu.edu/About/Geothermal.aspx

  13. Performance Assessment of Product Service System from System Architecture Perspectives

    Directory of Open Access Journals (Sweden)

    John P. T. Mo

    2012-01-01

    Full Text Available New business models in complex engineering products have favoured the integration of acquisition and sustainment phases in capability development. The product service system (PSS concept enables manufacturers of complex engineering products to incorporate support services into the product’s manufacturing and sustainment lifecycle. However, the PSS design has imposed significant risks to the manufacturer not only in the manufacture of the product itself, but also in the provision of support services over long period of time at a predetermined price. This paper analysed three case studies using case study research design approach and mapped the service elements of the case studies to the generic complex engineering product service system (CEPSS model. By establishing the concept of capability distribution for a PSS enterprise, the capability of the CEPSS can be overlaid on the performance-based reward scheme so that decision makers evaluate options related to the business opportunities presented to them.

  14. The System of Systems Architecture Feasibility Assessment Model

    Science.gov (United States)

    2016-06-01

    aircraft carrier , complete with its full complement of aircraft and other supporting activities. While this, in one sense, is a singular unit that...constituent system can perform an independent, useful action (e.g., the aircraft, the ship). In this sense, an aircraft carrier may be both an SoS and a...Wiley & Sons. Brantley, Mark W., Willie J. McFadden, and Mark J. Davis. 2002. “Expanding the Trade Space: An Analysis of Requirements Tradeoffs

  15. Evaluation of Grounding Impedance of a Complex Lightning Protective System Using Earth Ground Clamp Measurements and ATP Modeling

    Science.gov (United States)

    Mata, Carlos T.; Rakov, V. A.; Mata, Angel G.

    2010-01-01

    A new Lightning Protection System (LPS) was designed and built at Launch Complex 39B (LC39B), at the Kennedy Space Center (KSC), Florida, which consists of a catenary wire system (at a height of about 181 meters above ground level) supported by three insulators installed atop three towers in a triangular configuration. A total of nine downconductors (each about 250 meters long, on average) are connected to the catenary wire system. Each of the nine downconductors is connected to a 7.62-meter radius circular counterpoise conductor with six equally spaced 6-meter long vertical grounding rods. Grounding requirements at LC39B call for all underground and above ground metallic piping, enclosures, raceways, and cable trays, within 7.62 meters of the counterpoise, to be bounded to the counterpoise, which results in a complex interconnected grounding system, given the many metallic piping, raceways, and cable trays that run in multiple direction around LC39B. The complexity of this grounding system makes the fall of potential method, which uses multiple metallic rods or stakes, unsuitable for measuring the grounding impedances of the downconductors. To calculate the downconductors grounding impedance, an Earth Ground Clamp (a stakeless grounding resistance measuring device) and a LPS Alternative Transient Program (ATP) model are used. The Earth Ground Clamp is used to measure the loop impedance plus the grounding impedance of each downconductor and the ATP model is used to calculate the loop impedance of each downconductor circuit. The grounding impedance of the downconductors is then calculated by subtracting the ATP calculated loop impedances from the Earth Ground Clamp measurements.

  16. System Architecture of the Dark Energy Survey Camera Readout Electronics

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, Theresa; /FERMILAB; Ballester, Otger; Cardiel-Sas, Laia; Castilla, Javier; /Barcelona, IFAE; Chappa, Steve; /Fermilab; de Vicente, Juan; /Madrid, CIEMAT; Holm, Scott; Huffman, Dave; Kozlovsky, Mark; /Fermilab; Martinez, Gustavo; /Madrid, CIEMAT; Moore, Todd; /Madrid, CIEMAT /Fermilab /Illinois U., Urbana /Fermilab

    2010-05-27

    The Dark Energy Survey makes use of a new camera, the Dark Energy Camera (DECam). DECam will be installed in the Blanco 4M telescope at Cerro Tololo Inter-American Observatory (CTIO). DECam is presently under construction and is expected to be ready for observations in the fall of 2011. The focal plane will make use of 62 2Kx4K and 12 2kx2k fully depleted Charge-Coupled Devices (CCDs) for guiding, alignment and focus. This paper will describe design considerations of the system; including, the entire signal path used to read out the CCDs, the development of a custom crate and backplane, the overall grounding scheme and early results of system tests.

  17. ESPC Common Model Architecture Earth System Modeling Framework (ESMF) Software and Application Development

    Science.gov (United States)

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ESPC Common Model Architecture Earth System Modeling...LONG-TERM GOALS To expedite the development of numerical weather prediction (NWP) systems, the National Unified Operational Prediction...Capability (NUOPC) was established between NOAA and Navy to develop a common software architecture for easy and efficient interoperability. The

  18. Executable Behavioral Modeling of System and Software Architecture Specifications to Inform Resourcing Decisions

    Science.gov (United States)

    2016-09-01

    BEHAVIORAL MODELING OF SYSTEM- AND SOFTWARE-ARCHITECTURE SPECIFICATIONS TO INFORM RESOURCING DECISIONS by Monica F. Farah-Stapleton...REPORT DATE September 2016 3. REPORT TYPE AND DATES COVERED Doctoral Dissertation 4. TITLE AND SUBTITLE EXECUTABLE BEHAVIORAL MODELING OF SYSTEM...intellectual, programmatic, and organizational resources. Precise behavioral modeling offers a way to assess architectural design decisions prior to

  19. Eye-safe projection system with flexible architecture

    Science.gov (United States)

    Sabirov, Viacheslav

    2014-03-01

    Nowadays multimedia projectors of various types are widely used in many areas of human life. Significant part of all projector devices are used in two main areas: education (e. g. on lectures) and business (e. g. on all sorts of meetings). What makes projector a demanded device? It provides a user with high quality full color large diagonal image for a much lower price than display devices that based on other popular non-projecting technologies. However the absolute majority of projectors share a significant disadvantage. If human steps into the beam two major negative effects appear: a distorted image appears on human's body and human's eyes become glared by bright light. The first effect is undesirable by the audience and the second effect is undesirable by the presenter. To avoid the abovementioned effects short throw projectors can be used but they are more expensive than regular ones and have significant limitations on the placement spot: usually the lens of a short-throw projector is designed so that it has to be placed on a fixed distance to the screen. We propose a different solution of similar problem: instead of moving the projector towards the screen let us black out the human (or other obstacle) from it. To do so our system must know the exact position of human. In this paper we propose a system with flexible architecture that realizes the above-mentioned solution.

  20. Simulating Cooperative Systems Applications: a New Complete Architecture

    Directory of Open Access Journals (Sweden)

    Dominique Gruyer

    2013-01-01

    Full Text Available For a decade, embedded driving assistance systems were mainly dedicated to the management of short time events (lane departure, collision avoidance, collision mitigation. Recently a great number of projects have been focused on cooperative embedded devices in order to extend environment perception. Handling an extended perception range is important in order to provide enough information for both path planning and co-pilot algorithms which need to anticipate events. To carry out such applications, simulation has been widely used. Simulation is efficient to estimate the benefits of Cooperative Systems (CS based on Inter-Vehicular Communications (IVC. This paper presents a new and modular architecture built with the SiVIC simulator and the RTMaps™ multi-sensors prototyping platform. A set of improvements, implemented in SiVIC, are introduced in order to take into account IVC modelling and vehicles’ control. These 2 aspects have been tuned with on-road measurements to improve the realism of the scenarios. The results obtained from a freeway emergency braking scenario are discussed.

  1. Architecture for Payload Planning System (PPS) Software Distribution

    Science.gov (United States)

    Howell, Eric; Hagopian, Jeff

    1995-01-01

    The complex and diverse nature of the pay load operations to be performed on the Space Station requires a robust and flexible planning approach, and the proper software tools which tools to support that approach. To date, the planning software for most manned operations in space has been utilized in a centralized planning environment. Centralized planning is characterized by the following: performed by a small team of people, performed at a single location, and performed using single-user planning systems. This approach, while valid for short duration flights, is not conducive to the long duration and highly distributed payload operations environment of the Space Station. The Payload Planning System (PPS) is being designed specifically to support the planning needs of the large number of geographically distributed users of the Space Station. This paper problem provides a general description of the distributed planning architecture that PPS must support and describes the concepts proposed for making PPS available to the Space Station payload user community.

  2. Central Command Architecture for High Order Autonomous Unmanned Systems

    Science.gov (United States)

    Bieber, Chad Michael

    This dissertation describes a High-Order Central Command (HOCC) architecture and presents a flight demonstration where a single user coordinates 4 unmanned fixed-wing aircraft. HOCC decouples the user from control of individual vehicles, eliminating human limits on the size of the system, and uses a non-iterative sequence of algorithms that permit easy estimation of how computational complexity scales. The Hungarian algorithm used to solve a min-sum assignment with a one-task planning horizon becomes the limiting complexity, scaling at O(x3) where x is the larger number of vehicles or tasks in the assignment. This method is shown to have a unique property of creating non-intersecting routes which is used to drastically reduce the computational cost of deconflicting planned routes. Results from several demonstration flights are presented where a single user commands a system of 4 fixed-wing aircraft. The results confirm that autonomous flight of a large number of UAVs is a bona fide engineering sub-discipline, which is expected to be of interest to engineers who will find its utility in the aviation industry and in other emerging markets.

  3. Energy-aware system design algorithms and architectures

    CERN Document Server

    Kyung, Chong-Min

    2011-01-01

    Power consumption becomes the most important design goal in a wide range of electronic systems. There are two driving forces towards this trend: continuing device scaling and ever increasing demand of higher computing power. First, device scaling continues to satisfy Moore’s law via a conventional way of scaling (More Moore) and a new way of exploiting the vertical integration (More than Moore). Second, mobile and IT convergence requires more computing power on the silicon chip than ever. Cell phones are now evolving towards mobile PC. PCs and data centers are becoming commodities in house and a must in industry. Both supply enabled by device scaling and demand triggered by the convergence trend realize more computation on chip (via multi-core, integration of diverse functionalities on mobile SoCs, etc.) and finally more power consumption incurring power-related issues and constraints. Energy-Aware System Design: Algorithms and Architectures provides state-of-the-art ideas for low power design methods from ...

  4. Green IT engineering concepts, models, complex systems architectures

    CERN Document Server

    Kondratenko, Yuriy; Kacprzyk, Janusz

    2017-01-01

    This volume provides a comprehensive state of the art overview of a series of advanced trends and concepts that have recently been proposed in the area of green information technologies engineering as well as of design and development methodologies for models and complex systems architectures and their intelligent components. The contributions included in the volume have their roots in the authors’ presentations, and vivid discussions that have followed the presentations, at a series of workshop and seminars held within the international TEMPUS-project GreenCo project in United Kingdom, Italy, Portugal, Sweden and the Ukraine, during 2013-2015 and at the 1st - 5th Workshops on Green and Safe Computing (GreenSCom) held in Russia, Slovakia and the Ukraine. The book presents a systematic exposition of research on principles, models, components and complex systems and a description of industry- and society-oriented aspects of the green IT engineering. A chapter-oriented structure has been adopted for this book ...

  5. RBAC Driven Least Privilege Architecture For Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hull, Julie; Markham, Mark

    2014-01-25

    The concept of role based access control (RBAC) within the IT environment has been studied by researchers and was supported by NIST (circa 1992). This earlier work highlighted the benefits of RBAC which include reduced administrative workload and policies which are easier to analyze and apply. The goals of this research were to expand the application of RBAC in the following ways. • Apply RBAC to the control systems environment: The typical RBAC model within the IT environment is used to control a user’s access to files. Within the control system environment files are replaced with measurement (e.g., temperature) and control (e.g. valve) points organized as a hierarchy of control assets (e.g. a boiler, compressor, refinery unit). Control points have parameters (e.g., high alarm limit, set point, etc.) associated with them. The RBAC model is extended to support access to points and their parameters based upon roles while at the same time allowing permissions for the points to be defined at the asset level or point level directly. In addition, centralized policy administration with distributed access enforcement mechanisms was developed to support the distributed architecture of distributed control systems and SCADA. • Extend the RBAC model to include access control for software and devices: The established RBAC approach is to assign users to roles. This work extends that notion by first breaking the control system down into three layers 1) users, 2) software and 3) devices. An RBAC model is then created for each of these three layers. The result is that RBAC can be used to define machine-to-machine policy enforced via the IP security (IPsec) protocol. This highlights the potential to use RBAC for machine-to-machine connectivity within the internet of things. • Enable dynamic policy based upon the operating mode of the system: The IT environment is generally static with respect to policy. However, large cyber physical systems such as industrial controls have

  6. Software Architecture Coupling Metric for Assessing Operational Responsiveness of Trading Systems

    Directory of Open Access Journals (Sweden)

    Claudiu VINTE

    2012-01-01

    Full Text Available The empirical observation that motivates our research relies on the difficulty to assess the performance of a trading architecture beyond a few synthetic indicators like response time, system latency, availability or volume capacity. Trading systems involve complex software architectures of distributed resources. However, in the context of a large brokerage firm, which offers a global coverage from both, market and client perspectives, the term distributed gains a critical significance indeed. Offering a low latency ordering system by nowadays standards is relatively easily achievable, but integrating it in a flexible manner within the broader information system architecture of a broker/dealer requires operational aspects to be factored in. We propose a metric for measuring the coupling level within software architecture, and employ it to identify architectural designs that can offer a higher level of operational responsiveness, which ultimately would raise the overall real-world performance of a trading system.

  7. `imaka - a ground-layer adaptive optics system on Maunakea

    CERN Document Server

    Chun, Mark; Toomey, Douglas; Lu, Jessica; Service, Max; Baranec, Christoph; Thibault, Simon; Brousseau, Denis; Hayano, Yutaka; Oya, Shin; Santi, Shane; Kingery, Christopher; Loss, Keith; Gardiner, John; Steele, Brad

    2016-01-01

    We present the integration status for `imaka, the ground-layer adaptive optics (GLAO) system on the University of Hawaii 2.2-meter telescope on Maunakea, Hawaii. This wide-field GLAO pathfinder system exploits Maunakea's highly confined ground layer and weak free-atmosphere to push the corrected field of view to ~1/3 of a degree, an areal field approaching an order of magnitude larger than any existing or planned GLAO system, with a FWHM ~ 0.33 arcseconds in the visible and near infrared. We discuss the unique design aspects of the instrument, the driving science cases and how they impact the system, and how we will demonstrate these cases on the sky.

  8. A Simulated Multiagent-Based Architecture for Intrusion Detection System

    Directory of Open Access Journals (Sweden)

    Onashoga S. Adebukola

    2013-04-01

    Full Text Available In this work, a Multiagent-based architecture for Intrusion Detection System (MIDS is proposed to overcome the shortcoming of current Mobile Agent-based Intrusion Detection System. MIDS is divided into three major phases namely: Data gathering, Detection and the Response phases. The data gathering stage involves data collection based on the features in the distributed system and profiling. The data collection components are distributed on both host and network. Closed Pattern Mining (CPM algorithm is introduced for profiling users’ activities in network database. The CPM algorithm is built on the concept of Frequent Pattern-growth algorithm by mining a prefix-tree called CPM-tree, which contains only the closed itemsets and its associated support count. According to the administrator’s specified thresholds, CPM-tree maintains only closed patterns online and incrementally outputs the current closed frequent pattern of users’ activities in real time. MIDS makes use of mobile and static agents to carry out the functions of intrusion detection. Each of these agents is built with rule-based reasoning to autonomously detect intrusions. Java 1.1.8 is chosen as the implementation language and IBM’s Java based mobile agent framework, Aglet 1.0.3 as the platform for running the mobile and static agents. In order to test the robustness of the system, a real-time simulation is carried out on University of Agriculture, Abeokuta (UNAAB network dataset and the results showed an accuracy of 99.94%, False Positive Rate (FPR of 0.13% and False Negative Rate (FNR of 0.04%. This shows an improved performance of MIDS when compared with other known MA-IDSs.

  9. A Modular and Flexible Architecture for an Integrated Corpus Query System

    OpenAIRE

    Christ, Oliver

    1994-01-01

    The paper describes the architecture of an integrated and extensible corpus query system developed at the University of Stuttgart and gives examples of some of the modules realized within this architecture. The modules form the core of a corpus workbench. Within the proposed architecture, information required for the evaluation of queries may be derived from different knowledge sources (the corpus text, databases, on-line thesauri) and by different means: either through direct lookup in a dat...

  10. Mobile network architecture of the long-range WindScanner system

    OpenAIRE

    Vasiljevic, Nikola; Lea, Guillaume; Hansen, Per; Jensen, Henrik M

    2016-01-01

    In this report we have presented the network architecture of the long-range WindScanner system that allows utilization of mobile network connections without the use of static public IP addresses. The architecture mitigates the issues of additional fees and contractual obligations that are linked to the acquisition of the mobile network connections with static public IP addresses. The architecture consists of a hardware VPN solution based on the network appliances Z1 and MX60 from Cisco Meraki...

  11. Uncoupling File System Components for Bridging Legacy and Modern Storage Architectures

    Science.gov (United States)

    Golpayegani, N.; Halem, M.; Tilmes, C.; Prathapan, S.; Earp, D. N.; Ashkar, J. S.

    2016-12-01

    Long running Earth Science projects can span decades of architectural changes in both processing and storage environments. As storage architecture designs change over decades such projects need to adjust their tools, systems, and expertise to properly integrate such new technologies with their legacy systems. Traditional file systems lack the necessary support to accommodate such hybrid storage infrastructure resulting in more complex tool development to encompass all possible storage architectures used for the project. The MODIS Adaptive Processing System (MODAPS) and the Level 1 and Atmospheres Archive and Distribution System (LAADS) is an example of a project spanning several decades which has evolved into a hybrid storage architecture. MODAPS/LAADS has developed the Lightweight Virtual File System (LVFS) which ensures a seamless integration of all the different storage architectures, including standard block based POSIX compliant storage disks, to object based architectures such as the S3 compliant HGST Active Archive System, and the Seagate Kinetic disks utilizing the Kinetic Protocol. With LVFS, all analysis and processing tools used for the project continue to function unmodified regardless of the underlying storage architecture enabling MODAPS/LAADS to easily integrate any new storage architecture without the costly need to modify existing tools to utilize such new systems. Most file systems are designed as a single application responsible for using metadata to organizing the data into a tree, determine the location for data storage, and a method of data retrieval. We will show how LVFS' unique approach of treating these components in a loosely coupled fashion enables it to merge different storage architectures into a single uniform storage system which bridges the underlying hybrid architecture.

  12. APPLICATION OF IMPROVED PRODUCTION ACTIVITY CONTROL ARCHITECTURE FOR SHOP FLOOR INFORMATION SYSTEM IN DIGITAL MANUFACTURING

    Institute of Scientific and Technical Information of China (English)

    SHAHID Ikramullah Butt; SUN Houfang; GAO Zhengqing

    2006-01-01

    Shop floor control (SFC) is responsible for the coordination and control of the manufacturing physical and information flow within the shop floor in the manufacturing system. Weaknesses of the production activity control (PAC) architecture of the shop floor are addressed by the Maglica's new system architecture. This architecture gives rise to unlimited number of movers and producers thus evolving more complex but decentralized architecture. Beijing Institute of Technology - production activity control (BIT-PAC) architecture introduces an idea of sub-producers and sub-movers thus reducing the complexity of the architecture. All the equipments including sub-producers and sub-movers are considered to be passive in the proposed shop floor information system. The dissemination of information from sub-producers and sub-movers is done manually through a PC. Proposed BIT-PAC SFC architecture facilitates the information flow from shop floor to the other area of the organization. Effective use of internet information services (IIS) and SQL2000 is done along with the ASP. NET technology to implement the application logic. Applicability of the software based on BIT-PAC architecture is checked by running application software on a network PC that supports the dynamic flow of information from sub-producers and sub-movers to the other parts of the organization. Use of software is also shown at the end for BIT training workshop thus supporting the use of SFC architecture for similar kind of environments.

  13. On Converting Software Systems to Object Oriented Architectures

    National Research Council Canada - National Science Library

    Gabriela Czibula; Istvan Gergely Czibula

    2010-01-01

    Object-oriented concepts are useful concerning the reuse of existing software. Therefore a transformation of procedural programs to objectoriented architectures becomes an important process to enhance the reuse of procedural programs...

  14. Control system architecture of QUIJOTE multi-frequency instrument

    Science.gov (United States)

    Gómez-Reñasco, María. F.; Aguiar, Marta; Herreros, José Miguel; Hoyland, Roger J.; Sánchez de la Rosa, Vicente; Vega-Moreno, Afrodisio; Viera-Curbelo, Teodora; Génova-Santos, Ricardo; López-Caraballo, Carlos; Rebolo, Rafael; Rubiño-Martín, Jose Alberto

    2012-09-01

    The QUIJOTE-CMB experiment has been described in previous publications. Here we describe the architecture of the control system, hardware and software, of the QUIJOTE I instrument (MFI). It is a multi-channel instrument with five separate polarimeters: two of which operate at 10-14 GHz, two of which operate at 16-20 GHz, and a central polarimeter at 26-36 GHz. Each polarimeter can rotate at a speed of up to 1 Hz and also can move to discrete angular positions which allow the linear polar parameters Q, U and I to be derived. The instrument is installed in an alt-azimuth telescope which implements several operational modes: movement around the azimuth axis at a constant velocity while the elevation axis is held at a fixed elevation; tracking of a sky object; and raster of a rectangular area both in horizontal and sky coordinates. The control system of both, telescope and instrument, is based in the following technologies: an LXI-VXI bus is used for the signal acquisition system; an EtherCAT bus implements software PLCs developed in TwinCAT to perform the movement of the 5 polarimeters and the 2 axes of the telescope. Science signal, angular positions of the 5 polarimeters and telescope coordinates are sampled at up to 4000 Hz. All these data are correlated by a time stamp obtained from an external GPS clock implementing the Precise Time Protocol-1588 which provides synchronization to less than 1 microsecond. The control software also acquires housekeeping (HK) from the different subsystems. LabVIEW implements the instrument user interface.

  15. Phosphate-dependent root system architecture responses to salt stress

    KAUST Repository

    Kawa, Dorota

    2016-05-20

    Nutrient availability and salinity of the soil affect growth and development of plant roots. Here, we describe how phosphate availability affects root system architecture (RSA) of Arabidopsis and how phosphate levels modulate responses of the root to salt stress. Phosphate (Pi) starvation reduced main root length and increased the number of lateral roots of Arabidopsis Col-0 seedlings. In combination with salt, low Pi dampened the inhibiting effect of mild salt stress (75mM) on all measured RSA components. At higher NaCl concentrations, the Pi deprivation response prevailed over the salt stress only for lateral root elongation. The Pi deprivation response of lateral roots appeared to be oppositely affected by abscisic acid (ABA) signaling compared to the salt stress response. Natural variation in the response to the combination treatment of salt and Pi starvation within 330 Arabidopsis accessions could be grouped into four response patterns. When exposed to double stress, in general lateral roots prioritized responses to salt, while the effect on main root traits was additive. Interestingly, these patterns were not identical for all accessions studied and multiple strategies to integrate the signals from Pi deprivation and salinity were identified. By Genome Wide Association Mapping (GWAS) 13 genomic loci were identified as putative factors integrating responses to salt stress and Pi starvation. From our experiments, we conclude that Pi starvation interferes with salt responses mainly at the level of lateral roots and that large natural variation exists in the available genetic repertoire of accessions to handle the combination of stresses.

  16. Open architecture controller solution for custom machine systems

    Science.gov (United States)

    Anderson, Ronald L.; Reagin, J. M.; Garner, T. D.; Sweeny, T. E.

    1997-01-01

    In today's marketplace, product quality and price have become requirements for entry and are no longer sufficient to differentiate one's product and gain a competitive advantage. A key to competition in the future will be a company's ability to respond quickly to a rapidly-changing global marketplace. Developers of manufacturing equipment must play a role in the reduction of the product development cycle time by increasing the flexibility of their equipment and decreasing its cost and time to market. This paper will discuss the implementation of an open-architecture machine controller on a flip-chip placement machine and how this implementation supports the goals of reduced development time and increased equipment flexibility. The following subjects are discussed: 1) Issues related to the selection of a standard operating system, including real-time performance, preemptive multi-tasking, multi-threaded applications, and development tools. 2) The use of a common API for motion, and I/O. 3) Use of a rapid application development and object-oriented programming techniques on the machine controller to shorten development time and support code reuse. 4) Specific hardware and software issues related to the implementation of the flip chip controller. This includes hardware and software implementation details, controller performance, and human interface issues.

  17. From Requirements to code: an Architecture-centric Approach for producing Quality Systems

    CERN Document Server

    Bucchiarone, Antonio; Muccini, Henry; Pelliccione, Patrizio

    2009-01-01

    When engineering complex and distributed software and hardware systems (increasingly used in many sectors, such as manufacturing, aerospace, transportation, communication, energy, and health-care), quality has become a big issue, since failures can have economics consequences and can also endanger human life. Model-based specifications of a component-based system permit to explicitly model the structure and behaviour of components and their integration. In particular Software Architectures (SA) has been advocated as an effective means to produce quality systems. In this chapter by combining different technologies and tools for analysis and development, we propose an architecture-centric model-driven approach to validate required properties and to generate the system code. Functional requirements are elicited and used for identifying expected properties the architecture shall express. The architectural compliance to the properties is formally demonstrated, and the produced architectural model is used to automa...

  18. Space Shuttle Damper System for Ground Wind Load Tests

    Science.gov (United States)

    Robinson, G. D.; Holt, J. R.; Chang, C. S.

    1973-01-01

    An active damper system which was originally developed for a 5.5% Saturn IB/Skylab Ground Winds Model was modified and used for similar purposes in a Space Shuttle model. A second damper system which was originally used in a 3% Saturn V/Dry Workshop model was also modified and made compatible with the Space Shuttle model to serve as a back-up system. Included in this final report are descriptions of the modified damper systems and the associated control and instrumentation.

  19. Automatic Scheduling and Planning (ASAP) in future ground control systems

    Science.gov (United States)

    Matlin, Sam

    1988-01-01

    This report describes two complementary approaches to the problem of space mission planning and scheduling. The first is an Expert System or Knowledge-Based System for automatically resolving most of the activity conflicts in a candidate plan. The second is an Interactive Graphics Decision Aid to assist the operator in manually resolving the residual conflicts which are beyond the scope of the Expert System. The two system designs are consistent with future ground control station activity requirements, support activity timing constraints, resource limits and activity priority guidelines.

  20. Robotic Architectures

    Directory of Open Access Journals (Sweden)

    Mbali Mtshali

    2010-01-01

    Full Text Available In the development of mobile robotic systems, a robotic architecture plays a crucial role in interconnecting all the sub-systems and controlling the system. The design of robotic architectures for mobile autonomous robots is a challenging and complex task. With a number of existing architectures and tools to choose from, a review of the existing robotic architecture is essential. This paper surveys the different paradigms in robotic architectures. A classification of the existing robotic architectures and comparison of different proposals attributes and properties have been carried out. The paper also provides a view on the current state of designing robot architectures. It also proposes a conceptual model of a generalised robotic architecture for mobile autonomous robots.Defence Science Journal, 2010, 60(1, pp.15-22, DOI:http://dx.doi.org/10.14429/dsj.60.96

  1. Development of ground-based ELF/VLF receiver system in Wuhan and its first results

    Science.gov (United States)

    Chen, Yanping; Yang, Guobin; Ni, Binbin; Zhao, Zhengyu; Gu, Xudong; Zhou, Chen; Wang, Feng

    2016-05-01

    A new digital low-frequency receiver system has been developed at Wuhan University for sensitive reception of low-latitude broadband Extremely Low Frequency (ELF) and Very Low Frequency (VLF) radio waves originating from either natural or artificial sources. These low-frequency radio waves are useful for ionospheric remote sensing, geospace environment monitoring, and submarine communications. This paper presents the principle and architecture of the system framework, including magnetic loop antenna design, low-noise analog front-end and digital receiver with data sampling and transmission. A new structure is adopted in the analog front end to provide high common-mode rejection and to reduce interference. On basis of field programmable gate array (FPGA) device and Universal Serial Bus (USB) architecture, the digital receiver is developed along with time keeping and synchronization module. The validity and feasibility of the self-developed ground-based ELF/VLF receiver system is evaluated by first results of experimental data that show the temporal variation of broadband ELF/VLF wave spectral intensity in Wuhan (30.54 °N, 114.37 °E). In addition to the acquisition of VLF transmitter signals at various frequencies, tweek atmospherics are also clearly captured to occur at multiple modes up to n = 6.

  2. Space Telecommunications Radio System (STRS) Architecture Goals/Objectives and Level 1 Requirements

    Science.gov (United States)

    Briones, Janette C.; Johnson, Sandra K.; VanDerAar, Lisa

    2007-01-01

    The Space Telecommunications Radio System (STRS) Architecture Requirements Document provides the basis for the development of an open architecture for NASA Software Defined Radios (SDRs) for space use. The main objective of this document is to evaluate the goals and objectives and high level (Level 1) requirements that have bearing on the design of the architecture. The goals and objectives will provide broad, fundamental direction and purpose. The high level requirements (Level 1) intend to guide the broader and longer term aspects aspects of the SDR Architecture and provide guidance for the development of level 2 requirements.

  3. High Efficiency Three Phase Resonant Conversion for Standardized Architecture Power System Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A low-cost, standardized-architecture power system is proposed for NASA electric propulsion (EP) applications. Three approaches are combined to develop a system that...

  4. High Efficiency Three Phase Resonant Conversion for Standardized Architecture Power System Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A low-cost, standardized-architecture power system is proposed for NASA electric propulsion (EP) applications. Three approaches are combined to develop a system that...

  5. Developing a Prototype of Green BIM -based Integrated Design Systems for Small Architectural Design Firms

    National Research Council Canada - National Science Library

    Sae Jin Woo

    2016-01-01

    ...-friendly design elements to the architectural design process. Therefore, this study establishes an Integrated Design System based on Green BIM by applying the eco-friendly design values logically and systemically...

  6. Modeling and optimization of multiple unmanned aerial vehicles system architecture alternatives.

    Science.gov (United States)

    Qin, Dongliang; Li, Zhifei; Yang, Feng; Wang, Weiping; He, Lei

    2014-01-01

    Unmanned aerial vehicle (UAV) systems have already been used in civilian activities, although very limitedly. Confronted different types of tasks, multi UAVs usually need to be coordinated. This can be extracted as a multi UAVs system architecture problem. Based on the general system architecture problem, a specific description of the multi UAVs system architecture problem is presented. Then the corresponding optimization problem and an efficient genetic algorithm with a refined crossover operator (GA-RX) is proposed to accomplish the architecting process iteratively in the rest of this paper. The availability and effectiveness of overall method is validated using 2 simulations based on 2 different scenarios.

  7. Parallel Architectures and Parallel Algorithms for Integrated Vision Systems. Ph.D. Thesis

    Science.gov (United States)

    Choudhary, Alok Nidhi

    1989-01-01

    Computer vision is regarded as one of the most complex and computationally intensive problems. An integrated vision system (IVS) is a system that uses vision algorithms from all levels of processing to perform for a high level application (e.g., object recognition). An IVS normally involves algorithms from low level, intermediate level, and high level vision. Designing parallel architectures for vision systems is of tremendous interest to researchers. Several issues are addressed in parallel architectures and parallel algorithms for integrated vision systems.

  8. Mobile network architecture of the long-range WindScanner system

    DEFF Research Database (Denmark)

    Vasiljevic, Nikola; Lea, Guillaume; Hansen, Per

    In this report we have presented the network architecture of the long-range WindScanner system that allows utilization of mobile network connections without the use of static public IP addresses. The architecture mitigates the issues of additional fees and contractual obligations that are linked...... to the acquisition of the mobile network connections with static public IP addresses. The architecture consists of a hardware VPN solution based on the network appliances Z1 and MX60 from Cisco Meraki with additional 3G or 4G dongles. With the presented network architecture and appropriate configuration, we fulfill...... the requirements of running the long-range WindScanner system using a mobile network such as 3G. This architecture allows us to have the WindScanners and the master computer in different geographical locations, and in general facilitates deployments of the long-range WindScanner system....

  9. Conflict detection and resolution system architecture for unmanned aerial vehicles in civil airspace

    NARCIS (Netherlands)

    Jenie, Y.I.; van Kampen, E.J.; Ellerbroek, J.; Hoekstra, J.M.

    2015-01-01

    A novel architecture for a general Unmanned Aerial Vehicle (UAV) Conflict Detection and Resolution (CD&R) system, in the context of their integration into the civilian airspace, is proposed in this paper. The architecture consists of layers of safety approaches ,each representing a combination of di

  10. Conflict detection and resolution system architecture for unmanned aerial vehicles in civil airspace

    NARCIS (Netherlands)

    Jenie, Y.I.; van Kampen, E.J.; Ellerbroek, J.; Hoekstra, J.M.

    2015-01-01

    A novel architecture for a general Unmanned Aerial Vehicle (UAV) Conflict Detection and Resolution (CD&R) system, in the context of their integration into the civilian airspace, is proposed in this paper. The architecture consists of layers of safety approaches ,each representing a combination of di

  11. Conflict detection and resolution system architecture for unmanned aerial vehicles in civil airspace

    NARCIS (Netherlands)

    Jenie, Y.I.; van Kampen, E.J.; Ellerbroek, J.; Hoekstra, J.M.

    2015-01-01

    A novel architecture for a general Unmanned Aerial Vehicle (UAV) Conflict Detection and Resolution (CD&R) system, in the context of their integration into the civilian airspace, is proposed in this paper. The architecture consists of layers of safety approaches ,each representing a combination of

  12. Rule-based graph theory to enable exploration of the space system architecture design space

    Science.gov (United States)

    Arney, Dale Curtis

    The primary goal of this research is to improve upon system architecture modeling in order to enable the exploration of design space options. A system architecture is the description of the functional and physical allocation of elements and the relationships, interactions, and interfaces between those elements necessary to satisfy a set of constraints and requirements. The functional allocation defines the functions that each system (element) performs, and the physical allocation defines the systems required to meet those functions. Trading the functionality between systems leads to the architecture-level design space that is available to the system architect. The research presents a methodology that enables the modeling of complex space system architectures using a mathematical framework. To accomplish the goal of improved architecture modeling, the framework meets five goals: technical credibility, adaptability, flexibility, intuitiveness, and exhaustiveness. The framework is technically credible, in that it produces an accurate and complete representation of the system architecture under consideration. The framework is adaptable, in that it provides the ability to create user-specified locations, steady states, and functions. The framework is flexible, in that it allows the user to model system architectures to multiple destinations without changing the underlying framework. The framework is intuitive for user input while still creating a comprehensive mathematical representation that maintains the necessary information to completely model complex system architectures. Finally, the framework is exhaustive, in that it provides the ability to explore the entire system architecture design space. After an extensive search of the literature, graph theory presents a valuable mechanism for representing the flow of information or vehicles within a simple mathematical framework. Graph theory has been used in developing mathematical models of many transportation and

  13. Seismic Monitoring System Calibration Using Ground Truth Database

    Energy Technology Data Exchange (ETDEWEB)

    Chan, Winston; Wagner, Robert

    2002-12-22

    Calibration of a seismic monitoring system remains a major issue due to the lack of ground truth information and uncertainties in the regional geological parameters. Rapid and accurate identification of seismic events is currently not feasible due to the absence of a fundamental framework allowing immediate access to ground truth information for many parts of the world. Precise location and high-confidence identification of regional seismic events are the primary objectives of monitoring research in seismology. In the Department of Energy Knowledge Base (KB), ground truth information addresses these objectives and will play a critical role for event relocation and identification using advanced seismic analysis tools. Maintaining the KB with systematic compilation and analysis of comprehensive sets of geophysical data from various parts of the world is vital. The goal of this project is to identify a comprehensive database for China using digital seismic waveform data that are currently unavailable. These data may be analyzed along with ground truth information that becomes available. To date, arrival times for all regional phases are determined on all events above Mb 4.5 that occurred in China in 2000 and 2001. Travel-time models are constructed to compare with existing models. Seismic attenuation models may be constructed to provide better understanding of regional wave propagation in China with spatial resolution that has not previously been obtained.

  14. GRIFEX Payload Data System Architecture for On-Orbit Focal Plane Array Evaluation

    Science.gov (United States)

    Bekker, D. L.; Bryk, M.; DeLucca, J.; Franklin, B.; Hancock, B.; Klesh, A. T.; Meehan, C.; Meshkaty, N.; Nichols, J.; Pingree, P.; Rider, D. M.; Werne, T.; Wu, J.

    2012-12-01

    The GEO-CAPE ROIC In-Flight Performance Experiment (GRIFEX) is 3U CubeSat mission with the goal of on-orbit verification of a high performance focal plane array (FPA). The FPA is a custom silicon PIN diode array hybridized to the JPL-developed GEO-CAPE readout integrated circuit (ROIC). The FPA is 128 x 128 pixels, with a frame rate of up to 16 kHz, and 14 bits-per-pixel dynamic range. The FPA is designed to meet the measurement requirements of the PanFTS instrument, currently in development for the Earth Science Decadal Survey Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission. The GRIFEX FPA will operate at 8 kHz frame rate, producing a 1.84 Gbps data stream. This data will be buffered in the GRIFEX data system and will be telemetered to a ground station at the University of Michigan in short bursts when the GRIFEX CubeSat is in view of the station. The work presented here highlights the development of the GRIFEX payload data system, with emphasis on the system architecture, data storage strategy, and payload operations. Considerations for low power design and radiation robustness are also discussed. Initial images and a characterization of the FPA performance is presented. The GRIFEX mission is a joint effort between JPL (payload) and the University of Michigan (CubeSat). The launch is scheduled for 2014.

  15. Microcontroller based ground weapon control system(Short Communication

    Directory of Open Access Journals (Sweden)

    M. Sankar Kishore

    2001-10-01

    Full Text Available Armoured vehicles and tanks generally consist of high resolution optical (both infrared and visible and display systems for recognition and identification of the targets. Different weapons/articles to engage the targets may be present. A fire control system (FCS controls all the above systems, monitors the status of the articles present and passes the information to the display system. Depending upon the health and availability of the articles, the FCS selects and fires the articles. Design and development of ground control unit which is the heart of the FCS, both in hardware and software, has been emphasised. The system has been developed using microcontroller and software developed in ASM 51 language. The system also has a facility to test all the systems and articles as initial power on condition. From the safety point of view, software and hardware interlocks have been provided in the critical operations, like firing sequence. "

  16. A High-Level Functional Architecture for GNSS-Based Road Charging Systems

    DEFF Research Database (Denmark)

    Zabic, Martina

    2011-01-01

    Within recent years, GNSS-based road charging systems have been highly profiled on the policy makers’ agenda. These types of systems are however technically challenging and are considered one of the most complex types of charging systems. To understand the structure and behavior of such road...... charging systems, it is important to highlight the overall system architecture which is the framework that defines the basic functions and important concepts of the system. This paper presents a functional architecture for GNSS-based road charging systems based on the concepts of system engineering. First......, a short introduction is provided followed by a presentation of the system engineering methodology to illustrate how and why system architectures can be beneficial for GNSS-based road charging systems. Hereafter, a basic set of system functions is determined based on functional system requirements, which...

  17. A Taxonomy of Vision Systems for Ground Mobile Robots

    Directory of Open Access Journals (Sweden)

    Jesus Martínez-Gómez

    2014-07-01

    Full Text Available This paper introduces a taxonomy of vision systems for ground mobile robots. In the last five years, a significant number of relevant papers have contributed to this subject. Firstly, a thorough review of the papers is proposed to discuss and classify both past and the most current approaches in the field. As a result, a global picture of the state of the art of the last five years is obtained. Moreover, the study of the articles is used to put forward a comprehensive taxonomy based on the most up-to-date research in ground mobile robotics. In this sense, the paper aims at being especially helpful to both budding and experienced researchers in the areas of vision systems and mobile ground robots. The taxonomy described is devised from a novel perspective, namely in order to respond to the main questions posed when designing robotic vision systems: why?, what for?, what with?, how?, and where? The answers are derived from the most relevant techniques described in the recent literature, leading in a natural way to a series of classifications that are discussed and contextualized. The article offers a global picture of the state of the art in the area and discovers some promising research lines.

  18. Ground Systems Development Environment (GSDE) software configuration management

    Science.gov (United States)

    Church, Victor E.; Long, D.; Hartenstein, Ray; Perez-Davila, Alfredo

    1992-01-01

    This report presents a review of the software configuration management (CM) plans developed for the Space Station Training Facility (SSTF) and the Space Station Control Center. The scope of the CM assessed in this report is the Systems Integration and Testing Phase of the Ground Systems development life cycle. This is the period following coding and unit test and preceding delivery to operational use. This report is one of a series from a study of the interfaces among the Ground Systems Development Environment (GSDE), the development systems for the SSTF and the SSCC, and the target systems for SSCC and SSTF. This is the last report in the series. The focus of this report is on the CM plans developed by the contractors for the Mission Systems Contract (MSC) and the Training Systems Contract (TSC). CM requirements are summarized and described in terms of operational software development. The software workflows proposed in the TSC and MSC plans are reviewed in this context, and evaluated against the CM requirements defined in earlier study reports. Recommendations are made to improve the effectiveness of CM while minimizing its impact on the developers.

  19. A SECURE MESSAGE TRANSMISSION SYSTEM ARCHITECTURE FOR COMPUTER NETWORKS EMPLOYING SMART CARDS

    Directory of Open Access Journals (Sweden)

    Geylani KARDAŞ

    2008-01-01

    Full Text Available In this study, we introduce a mobile system architecture which employs smart cards for secure message transmission in computer networks. The use of smart card provides two security services as authentication and confidentiality in our design. The security of the system is provided by asymmetric encryption. Hence, smart cards are used to store personal account information as well as private key of each user for encryption / decryption operations. This offers further security, authentication and mobility to the system architecture. A real implementation of the proposed architecture which utilizes the JavaCard technology is also discussed in this study.

  20. On Converting Software Systems to Object Oriented Architectures

    Directory of Open Access Journals (Sweden)

    Gabriela Czibula

    2010-06-01

    Full Text Available Object-oriented concepts are useful concerning the reuse of existing software. Therefore a transformation of procedural programs to objectoriented architectures becomes an important process to enhance the reuse of procedural programs. Moreover, it would be useful to assist by automatic methods the software developers in transforming procedural code into an equivalent
    object-oriented one. In this paper we aim at introducing a hierarchical clustering algorithm that can be used for assisting software developers in the process of transforming procedural code into an object-oriented architecture.