WorldWideScience

Sample records for gross single axle

  1. Shifting Control Algorithm for a Single-Axle Parallel Plug-In Hybrid Electric Bus Equipped with EMT

    Directory of Open Access Journals (Sweden)

    Yunyun Yang

    2014-01-01

    Full Text Available Combining the characteristics of motor with fast response speed, an electric-drive automated mechanical transmission (EMT is proposed as a novel type of transmission in this paper. Replacing the friction synchronization shifting of automated manual transmission (AMT in HEVs, the EMT can achieve active synchronization of speed shifting. The dynamic model of a single-axle parallel PHEV equipped with the EMT is built up, and the dynamic properties of the gearshift process are also described. In addition, the control algorithm is developed to improve the shifting quality of the PHEV equipped with the EMT in all its evaluation indexes. The key techniques of changing the driving force gradient in preshifting and shifting compensation phases as well as of predicting the meshing speed in the gear meshing phase are also proposed. Results of simulation, bench test, and real road test demonstrate that the proposed control algorithm can reduce the gearshift jerk and the power interruption time noticeably.

  2. A model for equivalent axle load factors

    OpenAIRE

    Amorim, Sara I.R.; Pais, Jorge; Vale, Aline C.; Minhoto, Manuel

    2014-01-01

    Most design methods for road pavements require the design traffic, based on the transformation of the traffic spectrum, to be calculated into a number of equivalent passages of a standard axle using the equivalent axle load factors. Generally, these factors only consider the type of axle (single, tandem or tridem), but they do not consider the type of wheel on the axles, i.e., single or dual wheel. The type of wheel has an important influence on the calculation of the design traffic. The exis...

  3. Single Epoch GPS Deformation Signals Extraction and Gross Error Detection Technique Based on Wavelet Transform

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; GAO Jingxiang; XU Changhui

    2006-01-01

    Wavelet theory is efficient as an adequate tool for analyzing single epoch GPS deformation signal. Wavelet analysis technique on gross error detection and recovery is advanced. Criteria of wavelet function choosing and Mallat decomposition levels decision are discussed. An effective deformation signal extracting method is proposed, that is wavelet noise reduction technique considering gross error recovery, which combines wavelet multi-resolution gross error detection results. Time position recognizing of gross errors and their repairing performance are realized. In the experiment, compactly supported orthogonal wavelet with short support block is more efficient than the longer one when discerning gross errors, which can obtain more finely analyses. And the shape of discerned gross error of short support wavelet is simpler than that of the longer one. Meanwhile, the time scale is easier to identify.

  4. Giving AXL the axe: targeting AXL in human malignancy

    Science.gov (United States)

    Gay, Carl M; Balaji, Kavitha; Byers, Lauren Averett

    2017-01-01

    The receptor tyrosine kinase AXL, activated by a complex interaction between its ligand growth arrest-specific protein 6 and phosphatidylserine, regulates various vital cellular processes, including proliferation, survival, motility, and immunologic response. Although not implicated as an oncogenic driver itself, AXL, a member of the TYRO3, AXL, and MERTK family of receptor tyrosine kinases, is overexpressed in several haematologic and solid malignancies, including acute myeloid leukaemia, non-small cell lung cancer, gastric and colorectal adenocarcinomas, and breast and prostate cancers. In the context of malignancy, evidence suggests that AXL overexpression drives wide-ranging processes, including epithelial to mesenchymal transition, tumour angiogenesis, resistance to chemotherapeutic and targeted agents, and decreased antitumor immune response. As a result, AXL is an attractive candidate not only as a prognostic biomarker in malignancy but also as a target for anticancer therapies. Several AXL inhibitors are currently in preclinical and clinical development. This article reviews the structure, regulation, and function of AXL; the role of AXL in the tumour microenvironment; the development of AXL as a therapeutic target; and areas of ongoing and future investigation. PMID:28072762

  5. Generation of Gross Chromosomal Rearrangements by a Single Engineered DNA Double Strand Break

    Science.gov (United States)

    Qiu, Zhijun; Zhang, Zhenhua; Roschke, Anna; Varga, Tamas; Aplan, Peter D.

    2017-01-01

    Gross chromosomal rearrangements (GCRs), including translocations, inversions amplifications, and deletions, can be causal events leading to malignant transformation. GCRs are thought to be triggered by DNA double strand breaks (DSBs), which in turn can be spontaneous or induced by external agents (eg. cytotoxic chemotherapy, ionizing radiation). It has been shown that induction of DNA DSBs at two defined loci can produce stable balanced chromosomal translocations, however, a single engineered DNA DSB could not. Herein, we report that although a single engineered DNA DSB in H2AX “knockdown” cells did not generate GCRs, repair of a single engineered DNA DSB in fibroblasts that had ablated H2ax did produce clonal, stable GCRs, including balanced translocations and megabase-pair inversions. Upon correction of the H2ax deficiency, cells no longer generated GCRs following a single engineered DNA DSB. These findings demonstrate that clonal, stable GCRs can be produced by a single engineered DNA DSB in H2ax knockout cells, and that the production of these GCRs is ameliorated by H2ax expression. PMID:28225067

  6. 49 CFR 215.105 - Defective axle.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.105 Defective axle. A railroad may not place or continue in service a car, if— (a) An axle on the car has a crack or is broken; (b) An axle on the car has a gouge in the surface that is— (1)...

  7. Non-intrusive schemes for speed and axle identification in bridge-weigh-in-motion systems

    Science.gov (United States)

    Kalhori, Hamed; Makki Alamdari, Mehrisadat; Zhu, Xinqun; Samali, Bijan; Mustapha, Samir

    2017-02-01

    Bridge weigh-in-motion (BWIM) is an approach through which the axle and gross weight of trucks travelling at normal highway speed are identified using the response of an instrumented bridge. The vehicle speed, the number of axles, and the axle spacing are crucial parameters, and are required to be determined in the majority of BWIM algorithms. Nothing-on-the-road (NOR) strategy suggests using the strain signals measured at some particular positions underneath the deck or girders of a bridge to obtain this information. The objective of this research is to present a concise overview of the challenges of the current non-intrusive schemes for speed and axle determination through bending-strain and shear-strain based approaches. The problem associated with the global bending-strain responses measured at quarter points of span is discussed and a new sensor arrangement is proposed as an alternative. As for measurement of local responses rather than the global responses, the advantage of shear strains over bending strains is presented. However, it is illustrated that shear strains at quarter points of span can only provide accurate speed estimation but fail to detect the correct number of axles. As a remedy, it is demonstrated that, even for closely-spaced axles, the shear strain at the beginning of the bridge is capable of reliably identifying the number of axles. In order to provide a fully automated speed and axle identification system, appropriate signal processing including low-pass filtering and wavelet transforms are applied to the raw time signals. As case studies, the results of experimental testing in laboratory and on a real bridge are presented.

  8. REDESIGNING OF TRACTOR TROLLEY AXLE USING ANSYS

    Directory of Open Access Journals (Sweden)

    Harish V. Katore,

    2011-06-01

    Full Text Available In Central India, various small scale industries are adopting the crude methodologies for designing & manufacturing the machine components. One such industry producing tractor trolleys for agricultural use has been identified for this study. The existing trolley designed by the industry uses heavy axle without consideringstatic and dynamic loading conditions which in turn leads to higher factor of safety increasing the overall cost of the axle. In this study, existing trolley axle is redesigned considering the static and dynamic load conditions. A CAD model is prepared using CATIA V5 as a tool. Minimum cross section for the axle is calculated which resulted in the 24.8 % reduction in the weight of the axle. The axle dimensions are redesigned to 75 X 75 mm which is comparatively smaller than the old axle. The design is optimized based on the manufacturing cost of the axle. The failure analysis is performed on the axle of trolley used in agricultural area. These results provide atechnical basis to prevent future damage to the location axle.

  9. Rotation of artificial rotor axles in rotary molecular motors.

    Science.gov (United States)

    Baba, Mihori; Iwamoto, Kousuke; Iino, Ryota; Ueno, Hiroshi; Hara, Mayu; Nakanishi, Atsuko; Kishikawa, Jun-Ichi; Noji, Hiroyuki; Yokoyama, Ken

    2016-10-04

    F1- and V1-ATPase are rotary molecular motors that convert chemical energy released upon ATP hydrolysis into torque to rotate a central rotor axle against the surrounding catalytic stator cylinder with high efficiency. How conformational change occurring in the stator is coupled to the rotary motion of the axle is the key unknown in the mechanism of rotary motors. Here, we generated chimeric motor proteins by inserting an exogenous rod protein, FliJ, into the stator ring of F1 or of V1 and tested the rotation properties of these chimeric motors. Both motors showed unidirectional and continuous rotation, despite no obvious homology in amino acid sequence between FliJ and the intrinsic rotor subunit of F1 or V1 These results showed that any residue-specific interactions between the stator and rotor are not a prerequisite for unidirectional rotation of both F1 and V1 The torque of chimeric motors estimated from viscous friction of the rotation probe against medium revealed that whereas the F1-FliJ chimera generates only 10% of WT F1, the V1-FliJ chimera generates torque comparable to that of V1 with the native axle protein that is structurally more similar to FliJ than the native rotor of F1 This suggests that the gross structural mismatch hinders smooth rotation of FliJ accompanied with the stator ring of F1.

  10. AXL mediates resistance to cetuximab therapy.

    Science.gov (United States)

    Brand, Toni M; Iida, Mari; Stein, Andrew P; Corrigan, Kelsey L; Braverman, Cara M; Luthar, Neha; Toulany, Mahmoud; Gill, Parkash S; Salgia, Ravi; Kimple, Randall J; Wheeler, Deric L

    2014-09-15

    The EGFR antibody cetuximab is used to treat numerous cancers, but intrinsic and acquired resistance to this agent is a common clinical outcome. In this study, we show that overexpression of the oncogenic receptor tyrosine kinase AXL is sufficient to mediate acquired resistance to cetuximab in models of non-small cell lung cancer (NSCLC) and head and neck squamous cell carcinoma (HNSCC), where AXL was overexpressed, activated, and tightly associated with EGFR expression in cells resistant to cetuximab (Ctx(R) cells). Using RNAi methods and novel AXL-targeting agents, we found that AXL activation stimulated cell proliferation, EGFR activation, and MAPK signaling in Ctx(R) cells. Notably, EGFR directly regulated the expression of AXL mRNA through MAPK signaling and the transcription factor c-Jun in Ctx(R) cells, creating a positive feedback loop that maintained EGFR activation by AXL. Cetuximab-sensitive parental cells were rendered resistant to cetuximab by stable overexpression of AXL or stimulation with EGFR ligands, the latter of which increased AXL activity and association with the EGFR. In tumor xenograft models, the development of resistance following prolonged treatment with cetuximab was associated with AXL hyperactivation and EGFR association. Furthermore, in an examination of patient-derived xenografts established from surgically resected HNSCCs, AXL was overexpressed and activated in tumors that displayed intrinsic resistance to cetuximab. Collectively, our results identify AXL as a key mediator of cetuximab resistance, providing a rationale for clinical evaluation of AXL-targeting drugs to treat cetuximab-resistant cancers. Cancer Res; 74(18); 5152-64. ©2014 AACR. ©2014 American Association for Cancer Research.

  11. IDEAL BRAKE FORCE DISTRIBUTION BETWEEN THE AXLES OF THE TWO-AXLE VEHICLE SERVICE BRAKE APPLICATIONS

    Directory of Open Access Journals (Sweden)

    M. Podryhalo

    2015-07-01

    Full Text Available The obtained analytical expressions allow us to evaluate the stability of two-axle vehicles at various slowdowns. An analytical expression for calculating the ideal according to condition stability ensuring of a two-axle vehicle at service brake applications of brake force distribution allows to offer automatic control devices for brake force adjucement. With decellerationg growth of the two-axle vehicle at service braking the braking force acting on the front axle should decrease relative to the brake force on the rear axle.

  12. Mice lacking Axl and Mer tyrosine kinase receptors are susceptible to experimental autoimmune orchitis induction.

    Science.gov (United States)

    Li, Nan; Liu, Zhenghui; Zhang, Yue; Chen, Qiaoyuan; Liu, Peng; Cheng, C Yan; Lee, Will M; Chen, Yongmei; Han, Daishu

    2015-03-01

    The mammalian testis is an immunoprivileged organ where male germ cell autoantigens are immunologically ignored. Both systemic immune tolerance to autoantigens and local immunosuppressive milieu contribute to the testicular immune privilege. Testicular immunosuppression has been intensively studied, but information on systemic immune tolerance to autoantigens is lacking. In the present study, we aimed to determine the role of Axl and Mer receptor tyrosine kinases in maintaining the systemic tolerance to male germ cell antigens using the experimental autoimmune orchitis (EAO) model. Axl and Mer double-knockout (Axl(-/-)Mer(-/-)) mice developed evident EAO after a single immunization with germ cell homogenates emulsified with complete Freund's adjuvant. EAO was characterized by the accumulation of macrophages and T lymphocytes in the testis. Damage to the seminiferous epithelium was also observed. EAO induction was associated with pro-inflammatory cytokine upregulation in the testes, impaired permeability of the blood-testis barrier and generation of autoantibodies against germ cell antigens in Axl(-/-)Mer(-/-) mice. Immunization also induced mild EAO in Axl or Mer single-gene-knockout mice. By contrast, a single immunization failed to induce EAO in wild-type mice. The results indicate that Axl and Mer receptors cooperatively regulate the systemic immune tolerance to male germ cell antigens.

  13. Marginal Effects of a Gross Income Increase for a Single Parent Family in Six European Countries

    DEFF Research Database (Denmark)

    Willumsen, Marie

    High marginal tax rates constitute an issue in several countries because they are supposed to create barriers for increased labour supply. It is, however, often the case that relatively low income families with children face substantially higher combined marginal rates than even the highest...... the contributions to the combined marginal rate, the marginal effective tax rate, METR, using the OECD term, from taxation, payment for childcare, tapering of housing benefits and sometimes child benefits, when the income varies from a low level to a high level for a single parent family. Six countries are included...

  14. An attempt to determine the effect of increase of observation correlations on detectability and identifiability of a single gross error

    Science.gov (United States)

    Prószyński, Witold; Kwaśniak, Mieczysław

    2016-12-01

    The paper presents the results of investigating the effect of increase of observation correlations on detectability and identifiability of a single gross error, the outlier test sensitivity and also the response-based measures of internal reliability of networks. To reduce in a research a practically incomputable number of possible test options when considering all the non-diagonal elements of the correlation matrix as variables, its simplest representation was used being a matrix with all non-diagonal elements of equal values, termed uniform correlation. By raising the common correlation value incrementally, a sequence of matrix configurations could be obtained corresponding to the increasing level of observation correlations. For each of the measures characterizing the above mentioned features of network reliability the effect is presented in a diagram form as a function of the increasing level of observation correlations. The influence of observation correlations on sensitivity of the w-test for correlated observations (Förstner 1983, Teunissen 2006) is investigated in comparison with the original Baarda's w-test designated for uncorrelated observations, to determine the character of expected sensitivity degradation of the latter when used for correlated observations. The correlation effects obtained for different reliability measures exhibit mutual consistency in a satisfactory extent. As a by-product of the analyses, a simple formula valid for any arbitrary correlation matrix is proposed for transforming the Baarda's w-test statistics into the w-test statistics for correlated observations.

  15. AXL mediates resistance to cetuximab therapy

    National Research Council Canada - National Science Library

    Brand, Toni M; Iida, Mari; Stein, Andrew P; Corrigan, Kelsey L; Braverman, Cara M; Luthar, Neha; Toulany, Mahmoud; Gill, Parkash S; Salgia, Ravi; Kimple, Randall J; Wheeler, Deric L

    2014-01-01

    .... In this study, we show that overexpression of the oncogenic receptor tyrosine kinase AXL is sufficient to mediate acquired resistance to cetuximab in models of non-small cell lung cancer (NSCLC...

  16. Investigation on features and tendencies of axle-box heating

    Directory of Open Access Journals (Sweden)

    Olegas LUNYS

    2015-03-01

    Full Text Available Breakdown of rolling stock axle-boxes if not detected in due time may cause a rail accident or disaster. At present, a lot of advanced technologies, modern equipment and devices, which “recognizes” faulty axle-boxes when the train is in motion, have been implemented. However, the timely identification of breakdown of rolling stock axle-boxes still is an acute problem, the initial stage of damage emergence being especially problematic. Presently, rolling stock axle-box breakdown is determined according to the higher than permissible temperature of the axle-box body. The article provides statistical data of dangerously heated axle-boxes, determined train delay durations, the number of delayed trains by danger level, and dependence of damage on the season. After systematization of data on axle-box damage and heating temperatures of broken axle-boxes, heating tendencies of axle-boxes of freight wagons are described. Finally, basic conclusions are given.

  17. The Receptor Tyrosine Kinase AXL in Cancer Progression

    Directory of Open Access Journals (Sweden)

    Erinn B. Rankin

    2016-11-01

    Full Text Available The AXL receptor tyrosine kinase (AXL has emerged as a promising therapeutic target for cancer therapy. Recent studies have revealed a central role of AXL signaling in tumor proliferation, survival, stem cell phenotype, metastasis, and resistance to cancer therapy. Moreover, AXL is expressed within cellular components of the tumor microenvironment where AXL signaling contributes to the immunosuppressive and protumorigenic phenotypes. A variety of AXL inhibitors have been developed and are efficacious in preclinical studies. These agents offer new opportunities for therapeutic intervention in the prevention and treatment of advanced disease. Here we review the literature that has illuminated the cellular and molecular mechanisms by which AXL signaling promotes tumor progression and we will discuss the therapeutic potential of AXL inhibition for cancer therapy.

  18. Imaging Axl expression in pancreatic and prostate cancer xenografts

    Energy Technology Data Exchange (ETDEWEB)

    Nimmagadda, Sridhar, E-mail: snimmag1@jhmi.edu [Russell H. Morgan Department of Radiology and Radiological Science, Johns Hopkins University, Baltimore, MD 21287 (United States); Sidney Kimmel Comprehensive Cancer Center, Johns Hopkins University, Baltimore, MD 21287 (United States); Pullambhatla, Mrudula; Lisok, Ala [Russell H. Morgan Department of Radiology and Radiological Science, Johns Hopkins University, Baltimore, MD 21287 (United States); Hu, Chaoxin [Department of Pathology, Johns Hopkins University, Baltimore, MD 21287 (United States); Maitra, Anirban [Sidney Kimmel Comprehensive Cancer Center, Johns Hopkins University, Baltimore, MD 21287 (United States); Department of Pathology, Johns Hopkins University, Baltimore, MD 21287 (United States); Pomper, Martin G, E-mail: mpomper@jhmi.edu [Russell H. Morgan Department of Radiology and Radiological Science, Johns Hopkins University, Baltimore, MD 21287 (United States); Sidney Kimmel Comprehensive Cancer Center, Johns Hopkins University, Baltimore, MD 21287 (United States)

    2014-01-10

    Highlights: •Axl is overexpressed in a variety of cancers. •Axl overexpression confers invasive phenotype. •Axl imaging would be useful for therapeutic guidance and monitoring. •Axl expression imaging is demonstrated in pancreatic and prostate cancer xenografts. •Graded levels of Axl expression imaging is feasible. -- Abstract: The receptor tyrosine kinase Axl is overexpressed in and leads to patient morbidity and mortality in a variety of cancers. Axl–Gas6 interactions are critical for tumor growth, angiogenesis and metastasis. The goal of this study was to investigate the feasibility of imaging graded levels of Axl expression in tumors using a radiolabeled antibody. We radiolabeled anti-human Axl (Axl mAb) and control IgG1 antibodies with {sup 125}I with high specific radioactivity and radiochemical purity, resulting in an immunoreactive fraction suitable for in vivo studies. Radiolabeled antibodies were investigated in severe combined immunodeficient mice harboring subcutaneous CFPAC (Axl{sup high}) and Panc1 (Axl{sup low}) pancreatic cancer xenografts by ex vivo biodistribution and imaging. Based on these results, the specificity of [{sup 125}I]Axl mAb was also validated in mice harboring orthotopic Panc1 or CFPAC tumors and in mice harboring subcutaneous 22Rv1 (Axl{sup low}) or DU145 (Axl{sup high}) prostate tumors by ex vivo biodistribution and imaging studies at 72 h post-injection of the antibody. Both imaging and biodistribution studies demonstrated specific and persistent accumulation of [{sup 125}I]Axl mAb in Axl{sup high} (CFPAC and DU145) expression tumors compared to the Axl{sup low} (Panc1 and 22Rv1) expression tumors. Axl expression in these tumors was further confirmed by immunohistochemical studies. No difference in the uptake of radioactivity was observed between the control [{sup 125}I]IgG1 antibody in the Axl{sup high} and Axl{sup low} expression tumors. These data demonstrate the feasibility of imaging Axl expression in pancreatic

  19. Full-scale physical testing of a buried reinforced concrete pipe under axle load

    National Research Council Canada - National Science Library

    Lay, G.R; Brachman, R.W.I

    2014-01-01

    The structural response of a 600 mm inner diameter reinforced concrete pipe buried in a dense, well-graded sand and gravel soil and subjected to surface load from a single design truck axle with 0.3, 0.6...

  20. Determination of gross alpha, 224Ra, 226Ra, and 228Ra activities in drinking water using a single sample preparation procedure.

    Science.gov (United States)

    Parsa, Bahman; Obed, Reynaldo N; Nemeth, William K; Suozzo, Gail P

    2005-12-01

    The current federal and New Jersey State regulations have greatly increased the number of gross alpha and radium tests for public and private drinking water supplies. The determination of radium isotopes in water generally involves lengthy and complicated processes. In this study, a new approach is presented for the determination of gross alpha, 224Ra, 226Ra, and 228Ra activities in water samples. The method includes a single sample preparation procedure followed by alpha counting and gamma-ray spectroscopy. The sample preparation technique incorporates an EPA-approved co-precipitation methodology for gross alpha determination with a few alterations and improvements. Using 3-L aliquots of sample, spiked with 133Ba tracer, the alpha-emitting radionuclides are isolated by a BaSO4 and Fe(OH)3 co-precipitation scheme. First the gross alpha-particle activity of the sample is measured with a low-background gas-flow proportional counter, followed by radium isotopes assay by gamma-ray spectroscopy, using the same prepared sample. Gamma-ray determination of 133Ba tracer is used to assess the radium chemical recovery. The 224Ra, 226Ra, and 228Ra activities in the sample are measured through their gamma-ray-emitting decay products, 212Pb, 214Pb/214Bi, and 228Ac, respectively. In cases where 224Ra determination is required, the gamma-ray counting should be performed within 2-4 d from sample collection. To measure 226Ra activity in the sample, the gamma-ray spectroscopy can be repeated 21 d after sample preparation to ensure that 226Ra and its progeny have reached the equilibrium state. At this point, the 228Ac equilibration with parent 228Ra is already established. Analysis of aliquots of de-ionized water spiked with NIST-traceable 230Th, 224Ra, 226Ra, and 228Ra standards demonstrated the accuracy and precision of this method. Various performance evaluation samples were also assayed for gross alpha as well as radium isotope activity determination using this procedure and the

  1. Gross motor control

    Science.gov (United States)

    Gross motor control is the ability to make large, general movements (such as waving an arm or lifting a leg). ... Gross motor control is a milestone in the development of an infant. Infants develop gross motor control before they develop ...

  2. AXL is an oncotarget in human colorectal cancer

    Science.gov (United States)

    Martinelli, Erika; Troiani, Teresa; Liguori, Giuseppina; Vitagliano, Donata; Napolitano, Stefania; Morgillo, Floriana; Rinaldi, Barbara; Melillo, Rosa Marina; Liotti, Federica; Nappi, Anna; Bianco, Roberto; Berrino, Liberato; Ciuffreda, Loreta Pia; Ciardiello, Davide; Iaffaioli, Vincenzo; Botti, Gerardo; Ferraiolo, Fiorella; Ciardiello, Fortunato

    2015-01-01

    AXL is a tyrosine kinase receptor activated by GAS6 and regulates cancer cell proliferation migration and angiogenesis. We studied AXL as new therapeutic target in colorectal cancer (CRC). Expression and activation of AXL and GAS6 were evaluated in a panel of human CRC cell lines. AXL gene silencing or pharmacologic inhibition with foretinib suppressed proliferation, migration and survival in CRC cells. In an orthotopic colon model of human HCT116 CRC cells overexpressing AXL, foretinib treatment caused significant inhibition of tumour growth and peritoneal metastatic spreading. AXL and GAS6 overexpression by immunohistochemistry (IHC) were found in 76,7% and 73.5%, respectively, of 223 human CRC specimens, correlating with less differentiated histological grading. GAS6 overexpression was associated with nodes involvement and tumour stage. AXL gene was found amplified by Fluorescence in situ hybridization (FISH) in 8/146 cases (5,4%) of CRC samples. Taken together, AXL inhibition could represent a novel therapeutic approach in CRC. PMID:25966280

  3. Heavy and Overweight Vehicle Brake Testing: Five-Axle Combination Tractor-Flatbed Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lascurain, Mary Beth [ORNL; Capps, Gary J [ORNL; Franzese, Oscar [ORNL

    2013-10-01

    The Federal Motor Carrier Safety Administration, in coordination with the Federal Highway Administration, sponsored the Heavy and Overweight Vehicle Brake Testing (HOVBT) program in order to provide information about the effect of gross vehicle weight (GVW) on braking performance. Because the Federal Motor Carrier Safety Regulations limit the number of braking system defects that may exist for a vehicle to be allowed to operate on the roadways, the examination of the effect of brake defects on brake performance for increased loads is also relevant. The HOVBT program seeks to provide relevant information to policy makers responsible for establishing load limits, beginning with providing test data for a combination tractor/trailer. This testing was conducted on a five-axle combination vehicle with tractor brakes meeting the Reduced Stopping Distance requirement rulemaking. This report provides a summary of the testing activities, the results of various analyses of the data, and recommendations for future research. Following a complete brake rebuild, instrumentation, and brake burnish, stopping tests were performed from 20 and 40 mph with various brake application pressures (15 psi, 25 psi, 35 psi, 45 psi, 55 psi, and full system pressure). These tests were conducted for various brake conditions at the following GVWs: 60,000, 80,000, 91,000, 97,000, 106,000, and 116,000 lb. The 80,000-lb GVWs included both balanced and unbalanced loads. The condition of the braking system was also varied. To introduce these defects, brakes (none, forward drive axle, or rear trailer axle) were made inoperative. In addition to the stopping tests, performance-based brake tests were conducted for the various loading and brake conditions. Analysis of the stopping test data showed the stopping distance to increase with load (as expected) and also showed that more braking force was generated by the drive axle brakes than the trailer axle brakes. The constant-pressure stopping test data

  4. Dynamic analysis of rail vehicle axle

    Indian Academy of Sciences (India)

    Ferhat Dikmen; Meral Bayraktar; Rahmi Guclu

    2013-04-01

    In this paper, in order to obtain the dynamic forces on the passenger coach axle, a full rail vehicle model with 19-dof (degrees of freedom) has been considered. For a specific example, the variations of these dynamic forces with velocity of the passenger coach, suspension characteristics and way conditions have been examined. Dynamic forces found in the resonance regions at the range of 2–5 m/s (7.2–18 km/h) has been discussed. Theoretical results obtained for the dynamic forces have been successfully compared with the experimental results of German Railways (Deutsche Bahn-DB).

  5. Dynamic Response Characteristics of Asphalt Pavement Under Multi-axle Moving Load%多轴移动荷载下沥青路面的动态响应特性

    Institute of Scientific and Technical Information of China (English)

    裴建中; 吴浩; 陈勇; 王秉纲

    2011-01-01

    In order to analyze dynamic response characteristics of asphalt pavement under muhi axle moving load,a three-dimensional finite element model of asphalt pavement was established by field investigation. The influences of axle load with uniform distribution of single rear axle, dual rear axles and three rear axles and the axle load with non-uniform distribution of three rear axles and the three rear axles vehicles with impending front axle on pavement were studied respectively. Results show that the effect of each axle on pavement is independent when the wheelbase of multi axle vehicle is bigger than 3 m. Increase of number of axle makes the vertical displacement of pavement superpose and makes the maximal shear stress and compressive stress of pavement change inconspicuously. The influence of the middle axle of three rear axles vehicle on the vertical displacement of pavement is the greatest which increases by 23. 7% and 18. 2% compared with those of the front axle and rear axle respectively. Besides, the middle axle and rear axle has certain influence on the shear stress of pavement, but each axle has ahnost no influence on the maximal compressive stress of pavement. The research results indicate that the non uniform distribution of axle load of multi axle vehicle has significant influence on pavement faliure.%为分析多轴移动荷载下沥青路面的动态响应特性,通过现场调查建立了不同轴型作用下沥青路面的三维有限元模型,分别研究了单后轴、双后轴及三后轴轴载均匀分布、三后轴车轴载不均匀分布及三后轴车前轴悬空条件下对路面的影响。结果表明:多轴车轴距大于3m时,各轴对路面的作用相互独立,轴数的增加对路面竖向位移产生叠加作用,对路表最大剪应力及压应力影响不明显;三后轴车中轴对路面竖向位移作用最大,较前轴及后轴分别增大23.7%和18.2%,中轴及后轴对路表剪应力有一定影响,

  6. Expression Analysis Highlights AXL as a Candidate Zika Virus Entry Receptor in Neural Stem Cells.

    Science.gov (United States)

    Nowakowski, Tomasz J; Pollen, Alex A; Di Lullo, Elizabeth; Sandoval-Espinosa, Carmen; Bershteyn, Marina; Kriegstein, Arnold R

    2016-05-01

    The recent outbreak of Zika virus (ZIKV) in Brazil has been linked to substantial increases in fetal abnormalities and microcephaly. However, information about the underlying molecular and cellular mechanisms connecting viral infection to these defects remains limited. In this study we have examined the expression of receptors implicated in cell entry of several enveloped viruses including ZIKV across diverse cell types in the developing brain. Using single-cell RNA-seq and immunohistochemistry, we found that the candidate viral entry receptor AXL is highly expressed by human radial glial cells, astrocytes, endothelial cells, and microglia in developing human cortex and by progenitor cells in developing retina. We also show that AXL expression in radial glia is conserved in developing mouse and ferret cortex and in human stem cell-derived cerebral organoids, highlighting multiple experimental systems that could be applied to study mechanisms of ZIKV infectivity and effects on brain development.

  7. NM Gross Receipts Baseline

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  8. WHEELSET AXLE WITH THE CAVITY OF UNIFORM CROSS SECTION

    Directory of Open Access Journals (Sweden)

    S. R. Kolesnykov

    2014-10-01

    Full Text Available Purpose. Due to operation in complex loading conditions, the rolling stock wheelsets should provide high reliability, since the train traffic safety largely depends on them. Design and technical condition of wheelsets affect the smoothness, intensity of forces generated by the interaction between the car and track, and the motion resistance. Specificity of the axle operation consists in the fact that it undergoes the bending stresses under loading. These stresses are unevenly distributed along the cross-sectional area, reaching the highest values in the outer fibers and the minimal values in the internal ones. This aspect sets the problem of replacement of the uniform cross section with the hollow cross section. The disadvantages of hollow axle design, which are used at the present time, should include a significant manufacturing complexity of the variable section cavity. The purpose is to develop a modernized design of the wheelset axle. Methodology. A construction of the hollow axle having an inner longitudinal cylindrical through hole of the constant diameter throughout its length was proposed. The item is made of steel seamless tube. The inner surface of the tube is treated by mechanical means to remove the voltage concentrations in the internal longitudinal cylindrical through hole, which has a constant diameter along the entire length of the axle. Findings. Application of this design will facilitate manufacturing of the hollow axle and the machining of the inner longitudinal through hole, while retaining all the use advantages of the hollow axle in the rolling stock wheel pairs. Another use advantage of the hollow axle of this design is the absence of partial heterogeneity of the metal, which is inevitably, occurs during the solid axles blanking. Originality. A new design of the wheelset hollow axle of railway rolling stock was proposed. Practical value. Introduction of the new design simplifying the manufacture and mechanical treatment of

  9. Gross National Happiness

    DEFF Research Database (Denmark)

    Giri, Krishna Prasad; Kjær-Rasmussen, Lone Krogh

    This paper investigates practices related to the ideology of infusing Gross National Happiness (GNH) into school curriculum, the effectiveness of the meditation and mind training and the implication of GNH for school environment. It also explores how GNH ambience has been managed and practiced...... of Gross National Happiness and Educating for Gross National happiness....

  10. Rotation of artificial rotor axles in rotary molecular motors

    National Research Council Canada - National Science Library

    Baba, Mihori; Iwamoto, Kousuke; Iino, Ryota; Ueno, Hiroshi; Hara, Mayu; Nakanishi, Atsuko; Kishikawa, Jun-ichi; Noji, Hiroyuki; Yokoyama, Ken

    2016-01-01

    [F.sub.1]- and [V.sub.1]-ATPase are rotary molecular motors that convert chemical energy released upon ATP hydrolysis into torque to rotate a central rotor axle against the surrounding catalytic stator cylinder with high efficiency...

  11. FRONT AXLE OF MERCEDES AMG GT. MODELLING IN AUTODESK INVENTOR

    Directory of Open Access Journals (Sweden)

    COROLENCU Eduard – Narcis

    2017-05-01

    Full Text Available This paper analyzes the front axle of the Mercedes AMG GT model, as so as the graphical representation of the axle and of the subassemblies of suspension system and steering system, using the AutoCAD and Autodesk Inventor software. The paper include the steps for made the 3D model of the front axle in order to highlight the advantages of suspension and steering system, the function of this systems and methods for manufacturing of these. The 3D model presents a suite of complex surfaces. This type of surfaces is often designed with non-analytical means. The main commands and options used in Autodesk Inventor software were presented and explained. All the component parts of the front axle were modelled and assembled according to their functional role. Finally, the models were rendered in order to have a realistic appearance.

  12. Design Rules Discussion for Improving Multi-axle Vehicle Stability

    Institute of Scientific and Technical Information of China (English)

    ZHU Xuebin; JIANG Yingquan; GAO Feng

    2006-01-01

    A whole vehicle dynamic model is built, and the modeling method of connected hydragas spring suspension and multi-axle grouping steer system is also explained. Firstly, a kinematical analysis of suspension is implemented to achieve optimized suspension geometry parameters according to the stable requirement. Then, based on the evaluation of whole vehicle handling character with regard to various tire characters, driving configurations and super structures, the design rules are summarized to improve the stability of multi-axle vehicle.

  13. A New Approach for Reliability Life Prediction of Rail Vehicle Axle by Considering Vibration Measurement

    Directory of Open Access Journals (Sweden)

    Meral Bayraktar

    2014-01-01

    Full Text Available The effect of vibration on the axle has been considered. Vibration measurements at different speeds have been performed on the axle of a running rail vehicle to figure out displacement, acceleration, time, and frequency response. Based on the experimental works, equivalent stress has been used to find out life of the axles for 90% and 10% reliability. Calculated life values of the rail vehicle axle have been compared with the real life data and it is found that the life of a vehicle axle taking into account the vibration effects is in good agreement with the real life of the axle.

  14. Influence of Initial Inclined Surface Crack on Estimated Residual Fatigue Lifetime of Railway Axle

    Science.gov (United States)

    Náhlík, Luboš; Pokorný, Pavel; Ševčík, Martin; Hutař, Pavel

    2016-11-01

    Railway axles are subjected to cyclic loading which can lead to fatigue failure. For safe operation of railway axles a damage tolerance approach taking into account a possible defect on railway axle surface is often required. The contribution deals with an estimation of residual fatigue lifetime of railway axle with initial inclined surface crack. 3D numerical model of inclined semi-elliptical surface crack in railway axle was developed and its curved propagation through the axle was simulated by finite element method. Presence of press-fitted wheel in the vicinity of initial crack was taken into account. A typical loading spectrum of railway axle was considered and residual fatigue lifetime was estimated by NASGRO approach. Material properties of typical axle steel EA4T were considered in numerical calculations and lifetime estimation.

  15. MULTI-AXLE VEHICLE STABILITY BASED ON WHOLE VEHICLE MODEL

    Institute of Scientific and Technical Information of China (English)

    ZHU Xuebin; GAO Feng

    2007-01-01

    From the analysis of experiment data of the multi-axle vehicle chassis searching process, it is less accurate to predict multi-axle vehicle dynamic characteristic with simplified two-axle vehicle model. So it is important to find out a more effective modeling method in the study of multi-vehicle stability. In the development of heat transfer fluid(HTF) six-axle vehicle, a whole vehicle multi-body dynamic model is built through collaborate flowchart using Teamcenter Engineering, UG NX3 and MSC. Adams. The modeling method of connected hydragas spring suspension is validated by running test results. Based on this whole vehicle model, a kinematical analysis of suspension is implemented to achieve optimized suspension geometry parameters according to the stable requirement. Then, different handling simulations are carried out with regard to various tire characteristics, driving configurations, and equipments. According to the evaluation of whole vehicle handling characteristic, some design rules are summarized to improve the stability of multi-axle vehicle.

  16. Capacitated vehicle routing problem with sequence-based pallet loading and axle weight constraints

    OpenAIRE

    2016-01-01

    In this paper, we introduce and study the capacitated vehicle routing problem with sequence-based pallet loading and axle weight constraints. To the best of our knowledge, it is the first time that axle weight restrictions are incorporated in a vehicle routing model. The aim of this paper is to demonstrate that incorporating axle weight restrictions in a vehicle routing model is possible and necessary for a feasible route planning. Axle weight limits impose a great challenge for transportatio...

  17. The Application of Phased Array Ultrasonic Techniques for Inspection of Railway Axles from Their End Face

    Science.gov (United States)

    Liaptsis, D.; Cooper, I.; Boyle, K.; Nicholson, P. I.

    2011-06-01

    As part of the development of a non destructive testing (NDT) system combining complementary inspection techniques, an inspection system based on phased array ultrasonic testing (PAUT) for detection of transverse cracking in solid railway axles is being developed. This paper presents the initial study, which includes the PAUT experimental setup and the initial results obtained after testing the system on railway axle blocks. The inspection of solid axles from their axle end face is investigated.

  18. Recommendations regarding higher axlemass limits for axles fitted with wide base tyres

    CSIR Research Space (South Africa)

    Roux, MP

    2011-01-01

    Full Text Available This paper presents the results of an investigation into possible higher axle mass limits for axles and axle units fitted with wide base tyres, i.e. tyres with nominal section widths of 385 mm, 425 mm and 445 mm, by comparing the road wear caused...

  19. Optimization of Front Axle Suspension System of Articulated Dump Truck

    DEFF Research Database (Denmark)

    Langer, Thomas Heegaard; Christensen, Brian B.; Mouritsen, Ole Ø.

    2010-01-01

    ongoing research collaboration between Hydrema Produktion A/S, Aalborg University and the University of Agder on comfort improvement. The main goal of the research project is to improve ride comfort of articulated construction machinery by use of multibody simulation models. In this paper the application...... that has been subjected to comfort improvement is a two axle articulated dump truck. The comfort has been in terms of whole body vibration exposure and the overall improvement has been made possible by adding front axle suspension. However, a hydraulic stabilizing system between the tractor and trailer...

  20. Eddy current system for inspection of train hollow axles

    Energy Technology Data Exchange (ETDEWEB)

    Chady, Tomasz; Psuj, Grzegorz; Sikora, Ryszard; Kowalczyk, Jacek; Spychalski, Ireneusz [Department of Electrical and Computer Engineering, Faculty of Electrical Engineering, West Pomeranian University of Technology, Szczecin (Poland)

    2014-02-18

    The structural integrity of wheelsets used in rolling stock is of great importance to the safety. In this paper, electromagnetic system with an eddy current transducer suitable for the inspection of hollow axles have been presented. The transducer was developed to detect surface braking defects having depth not smaller than 0.5 mm. Ultrasound technique can be utilized to inspect the whole axle, but it is not sufficiently sensitive to shallow defects located close to the surface. Therefore, the electromagnetic technique is proposed to detect surface breaking cracks that cannot be detected by ultrasonic technique.

  1. Loovkirjutamist õpetab Philip Gross

    Index Scriptorium Estoniae

    2011-01-01

    T.S. Elioti luulepreemia laureaat Philip Gross on Tallinna Ülikooli talvekooli rahvusvahelise kursuse "Poetry: A Conversation between Words and Silence" läbiviija. Oma seminarides keskendub ta lisaks loovkirjutamisele ka loova lugemise vajadusele

  2. Gross Sales Tax Collections

    Data.gov (United States)

    City of Jackson, Mississippi — This data is captured directly from the MS Department of Revenue and specific to the City of Jackson. It is compiled from Gross Sales Tax reported by taxpayers each...

  3. LSTM-Based Temperature Prediction for Hot-Axles of Locomotives

    Directory of Open Access Journals (Sweden)

    Luo Can

    2017-01-01

    Full Text Available The reliability of locomotives plays a central role for the smooth operation of railway systems. Hot-axle failures are one of the most commonly found problems leading to locomotive accidents. Since the operating status of the locomotive axle bearings can be distinctly reflected by the axle temperatures, online temperature monitoring has become an essential way to detect hot-axle failures. In this work, we explore the feasibility of predict the hot-axle failures by identifying the temperature from predicted nominal values. We propose a data-driven approach based on the Long Short-Term Memory (LSTM network to predict the sensor temperature for axle bearings. The effectiveness of the prediction model was validated with operation data collected from commercial locomotives. With a prediction accuracy is within a few percent, the proposed techniques can be used as a dynamic reference for hot-axle monitoring.

  4. Shape Optimization Of Front Axle Support Of Tractor

    Directory of Open Access Journals (Sweden)

    Shree Dewangan

    2014-04-01

    Full Text Available The front axle support of tractor is the part of tractor which holds the engine of tractor and also gives support to it and lies between engine and front axle of tractor. According to the present market demand of off highway vehicle the low cost and light weight vehicle is in demand to fulfill the requirement of cost efficient vehicle. In this paper analysis of front axle support is done for study of stress generated in the component and then after optimization of its shape and according to the shape its weight will also reduced. Considering the effect of forces acted on such a heavy parts in tractor designed by casting having dynamic loads of less frequency with greater amplitude may cause great damage to the component. According to the production techniques of components in tractor front axle requires a properly designed support with high stiffness. The design of component was modeled in Creo parametric 2.0 and the analysis was performed in solid works. Shape optimization technique is used for performing optimization cause miserable reduction in weight of connecting rod. The optimized component is 10.35% lighter compare to initial design.

  5. Manual Drivetrain and Axles Specialist. Teacher Edition. Automotive Service Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This instructor's guide contains materials for teaching the manual drive trains and axle specialist component of a competency-based instructional program for students preparing for employment in the automotive service trade. It is based on National Institute of Automotive Service Excellence task lists. Six instructional units contain materials…

  6. DACIA LOGAN LIVE AXLE OPTIMISATION USING COMPUTER GRAPHICS

    Directory of Open Access Journals (Sweden)

    KIRALY Andrei

    2017-05-01

    Full Text Available The paper presents some contributions to the calculus and optimisation of a live axle used at Dacia Logan using computer graphics software for creating the model and afterwards using FEA evaluation to determine the effectiveness of the optimisation. Thus using specialized computer software, a simulation is made and the results were compared to the measured real prototype.

  7. Detection of early squats by axle box acceleration

    NARCIS (Netherlands)

    Molodova, M.

    2013-01-01

    This thesis discusses a new method for detection of short track irregularities, particularly squats, with axle box acceleration (ABA) measurements. A squat is a surface initiated short track defect, associated with high frequency vibrations of the wheel-rail system. High stresses in the contact

  8. Inhibition of Axl improves the targeted therapy against ALK-mutated neuroblastoma

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Fei [Department of Neurology, Sichuan Medical Science Institute and Sichuan Provincial Hospital, Chengdu 610072 (China); Li, Hongling [Department of Radiotherapy, Shanghai First People’s Hospital, Shanghai Jiao Tong University, Shanghai 201620 (China); Sun, Yong, E-mail: sunfanqi2010@163.com [Department of Burn and Plastic Surgery, Huai’an First People’s Hospital, Nanjing Medical University, Huai’an 223300 (China)

    2014-11-28

    Highlights: • First reported Axl is co-expressed with ALK in neuroblastoma tissues and cell lines. • Axl activation promotes cell growth and impairs the efficiency of ALK inhibitor. • Further found silence of Axl leads to increased sensitivity to ALK inhibitors. • Axl inhibitor promotes the efficiency of targeted therapy in vitro and in vivo. • Axl activation should be considered in the clinical application of ALK inhibitors. - Abstract: Neuroblastoma (NB) patients harboring mutated ALK can be expected to potentially benefit from targeted therapy based on ALK tyrosine kinase inhibitor (TKI), such as crizotinib and ceritinib. However, the effect of the treatment varies with different individuals, although with the same genic changes. Axl receptor tyrosine kinase is expressed in a variety of human cancers, but little data are reported in NB, particularly in which carrying mutated ALK. In this study, we focus on the roles of Axl in ALK-mutated NB for investigating rational therapeutic strategy. We found that Axl is expressed in ALK-positive NB tissues and cell lines, and could be effectively activated by its ligand GAS6. Ligand-dependent Axl activation obviously rescued crizotinib-mediated suppression of cell proliferation in ALK-mutated NB cells. Genetic inhibition of Axl with specific small interfering RNA markedly increased the sensitivity of cells to ALK-TKIs. Furthermore, a small-molecule inhibitor of Axl significantly enhanced ALK-targeted therapy, as an increased frequency of apoptosis was observed in NB cells co-expressing ALK and Axl. Taken together, our results demonstrated that activation of Axl could lead to insensitivity to ALK inhibitors, and dual inhibition of ALK and Axl might be a potential therapeutic strategy against ALK-mutated NB.

  9. Sunitinib activates Axl signaling in renal cell cancer.

    Science.gov (United States)

    van der Mijn, Johannes C; Broxterman, Henk J; Knol, Jaco C; Piersma, Sander R; De Haas, Richard R; Dekker, Henk; Pham, Thang V; Van Beusechem, Victor W; Halmos, Balazs; Mier, James W; Jiménez, Connie R; Verheul, Henk M W

    2016-06-15

    Mass spectrometry-based phosphoproteomics provides a unique unbiased approach to evaluate signaling network in cancer cells. The tyrosine kinase inhibitor sunitinib is registered as treatment for patients with renal cell cancer (RCC). We investigated the effect of sunitinib on tyrosine phosphorylation in RCC tumor cells to get more insight in its mechanism of action and thereby to find potential leads for combination treatment strategies. Sunitinib inhibitory concentrations of proliferation (IC50) of 786-O, 769-p and A498 RCC cells were determined by MTT-assays. Global tyrosine phosphorylation was measured by LC-MS/MS after immunoprecipitation with the antiphosphotyrosine antibody p-TYR-100. Phosphoproteomic profiling of 786-O cells yielded 1519 phosphopeptides, corresponding to 675 unique proteins including 57 different phosphorylated protein kinases. Compared to control, incubation with sunitinib at its IC50 of 2 µM resulted in downregulation of 86 phosphopeptides including CDK5, DYRK3, DYRK4, G6PD, PKM and LDH-A, while 94 phosphopeptides including Axl, FAK, EPHA2 and p38α were upregulated. Axl- (y702), FAK- (y576) and p38α (y182) upregulation was confirmed by Western Blot in 786-O and A498 cells. Subsequent proliferation assays revealed that inhibition of Axl with a small molecule inhibitor (R428) sensitized 786-O RCC cells and immortalized endothelial cells to sunitinib up to 3 fold. In conclusion, incubation with sunitinib of RCC cells causes significant upregulation of multiple phosphopeptides including Axl. Simultaneous inhibition of Axl improves the antitumor activity of sunitinib. We envision that evaluation of phosphoproteomic changes by TKI treatment enables identification of new targets for combination treatment strategies.

  10. Soluble Axl is generated by ADAM10-dependent cleavage and associates with Gas6 in mouse serum.

    Science.gov (United States)

    Budagian, Vadim; Bulanova, Elena; Orinska, Zane; Duitman, Erwin; Brandt, Katja; Ludwig, Andreas; Hartmann, Dieter; Lemke, Greg; Saftig, Paul; Bulfone-Paus, Silvia

    2005-11-01

    Axl receptor tyrosine kinase exists as a transmembrane protein and as a soluble molecule. We show that constitutive and phorbol 12-myristate 13-acetate-induced generation of soluble Axl (sAxl) involves the activity of disintegrin-like metalloproteinase 10 (ADAM10). Spontaneous and inducible Axl cleavage was inhibited by the broad-spectrum metalloproteinase inhibitor GM6001 and by hydroxamate GW280264X, which is capable of blocking ADAM10 and ADAM17. Furthermore, murine fibroblasts deficient in ADAM10 expression exhibited a significant reduction in constitutive and inducible Axl shedding, whereas reconstitution of ADAM10 restored sAxl production, suggesting that ADAM10-mediated proteolysis constitutes a major mechanism for sAxl generation in mice. Partially overlapping 14-amino-acid stretch deletions in the membrane-proximal region of Axl dramatically affected sAxl generation, indicating that these regions are involved in regulating the access of the protease to the cleavage site. Importantly, relatively high circulating levels of sAxl are present in mouse sera in a heterocomplex with Axl ligand Gas6. Conversely, two other family members, Tyro3 and Mer, were not detected in mouse sera and conditioned medium. sAxl is constitutively released by murine primary cells such as dendritic and transformed cell lines. Upon immobilization, sAxl promoted cell migration and induced the phosphorylation of Axl and phosphatidylinositol 3-kinase. Thus, ADAM10-mediated generation of sAxl might play an important role in diverse biological processes.

  11. Soluble Axl Is Generated by ADAM10-Dependent Cleavage and Associates with Gas6 in Mouse Serum†

    Science.gov (United States)

    Budagian, Vadim; Bulanova, Elena; Orinska, Zane; Duitman, Erwin; Brandt, Katja; Ludwig, Andreas; Hartmann, Dieter; Lemke, Greg; Saftig, Paul; Bulfone-Paus, Silvia

    2005-01-01

    Axl receptor tyrosine kinase exists as a transmembrane protein and as a soluble molecule. We show that constitutive and phorbol 12-myristate 13-acetate-induced generation of soluble Axl (sAxl) involves the activity of disintegrin-like metalloproteinase 10 (ADAM10). Spontaneous and inducible Axl cleavage was inhibited by the broad-spectrum metalloproteinase inhibitor GM6001 and by hydroxamate GW280264X, which is capable of blocking ADAM10 and ADAM17. Furthermore, murine fibroblasts deficient in ADAM10 expression exhibited a significant reduction in constitutive and inducible Axl shedding, whereas reconstitution of ADAM10 restored sAxl production, suggesting that ADAM10-mediated proteolysis constitutes a major mechanism for sAxl generation in mice. Partially overlapping 14-amino-acid stretch deletions in the membrane-proximal region of Axl dramatically affected sAxl generation, indicating that these regions are involved in regulating the access of the protease to the cleavage site. Importantly, relatively high circulating levels of sAxl are present in mouse sera in a heterocomplex with Axl ligand Gas6. Conversely, two other family members, Tyro3 and Mer, were not detected in mouse sera and conditioned medium. sAxl is constitutively released by murine primary cells such as dendritic and transformed cell lines. Upon immobilization, sAxl promoted cell migration and induced the phosphorylation of Axl and phosphatidylinositol 3-kinase. Thus, ADAM10-mediated generation of sAxl might play an important role in diverse biological processes. PMID:16227584

  12. Passivation and Corrosion Behavior of Modified Ferritic-Pearlitic Railway Axle Steels

    Science.gov (United States)

    Moon, A. P.; Sangal, S.; Srivastav, Simant; Gajbhiye, N. S.; Mondal, K.

    2015-01-01

    Electrochemical polarization behavior of two newly developed ferritic-pearlitic railway axle steels (MS3 and MS6) and the standard Indian conventional axle steel has been studied in sodium borate buffer solution of pH 8.4 with and without the presence of NaCl. The polarization behavior of both the new axle steels shows close resemblance, whereas, different polarization behavior has been observed for the conventional axle steel. Electrochemical impedance spectroscopy measurements have clearly reflected significantly improved passivation behavior for the newly developed steels compared to that of the conventional axle steel. NaCl salt fog exposure tests have also shown superior corrosion resistance of the newly developed axle steels as compared to the conventional axle steel. Higher surface roughness on the corroded conventional axle steel has also been observed compared to the smoother surface in case of the new axle steels. Higher corrosion resistance of the new axle steels has been attributed to their finer microstructure and strongly adherent protective rusts.

  13. Expression of Axl in Lung Adenocarcinoma and Correlation with Tumor Progression

    Directory of Open Access Journals (Sweden)

    Yi-Shing Shinh

    2005-12-01

    Full Text Available We used the Transwell system to select highly invasive cell lines from minimally invasive parent cells, and we compared gene expression in paired cell lines with high and low invasive potentials. Axl was relatively overexpressed in the highly invasive cell lines when compared with their minimally invasive counterparts. However, there is only limited information about the role of Axl in cancer invasion. The biologic function of Axl in tumor invasion was investigated by overexpression of full-length Axl in minimally invasive cells and by siRNA knockdown of Axl expression in highly invasive cells. Overexpression of Axl in minimally invasive cells increased their invasiveness. siRNA reduced cell invasiveness as Axl was downregulated in highly invasive cells. We further investigated the protein expression of Axl by immunohistochemistry and its correlation with clinicopathologic features. Data from a study of 58 patient specimens showed that Axl immunoreactivity was statistically significant with respect to lymph node status (P < .0001 and the patient's clinical stage (P < .0001. Our results demonstrate that Axl protein kinase seems to play an important role in the invasion and progression of lung cancer.

  14. Dynamic Axle Load of an Automotive Vehicle When Driven on a Mobile Measurement Platform

    Directory of Open Access Journals (Sweden)

    Jagiełowicz-Ryznar C.

    2014-08-01

    Full Text Available An analysis of the dynamic axle load of an automotive vehicle (AV when it is driven on a mobile measurement platform is presented in this paper. During the ride, the time characteristic of the dynamic force N(t, acting on the axle, was recorded. The effect of the vehicle axle mass on the maximum dynamic force value and the dynamic coefficient were studied. On this basis it was attempted to calculate the total vehicle’s weight. Conclusions concerning the dynamic loads of the vehicle axles in relation to the reduced axle mass, were drawn. The optimal axle mass value, for which the dynamic coefficient reaches a minimum, was calculated

  15. Accelerated Life Test Design for Tractor Powertrain Front Axle

    Directory of Open Access Journals (Sweden)

    Ismail Azianti

    2016-01-01

    Full Text Available Accelerated Life Test (ALT has been applied in the manufacturing for many years due to rapid changing technologies, more complex products, speedier product development, and more demanding customer requirements. These reasons have pushed the manufacturers to acquire reliability information faster. ALT allows reducing the time needed to show the reliability of the product. The purpose of this study is to design accelerated life testing which involved determination of normal test time, acceleration factor, acceleration test time, and finally experimental setup. This case study provides the basis for ALT designs for the tractor front axle based on customer usage and field failure analysis, which were conducted to estimate the current reliability, especially on the B10 life during the operational stage of the product. The accelerated life test conducted has guaranteed the B10 life of 4,000 hours with 90% confidence level for lesser time needed for testing to show the reliability of the front axle assembly.

  16. Dynamic Modelling of Axle Tramp in a Sport Type Car

    Directory of Open Access Journals (Sweden)

    Ali Zargartalebi

    2013-01-01

    Full Text Available One of the most significant dynamic aspects of coupled vibration of transmission system and dependent type suspension systems is axle tramp. The tramp is defined as undesirable oscillation of rigid live axle around roll axis. In spite of utilizing powerful engines in some type of sport cars, tramp occurrence causes loss of longitudinal performance. The aim of this paper is to derive a mathematical model for predicting and classifying of the tramp. A parameter study reveals that, some parameters such as engine torque, moving parts moment of inertia, car and wheels weight and the material used in suspension system play important role in controlling the tramp. It is shown that large difference between sprung and unsprung mass moment of inertia around the roll-axis, low vehicle mass, short rear track and medium damping values have significant effects on the severity of tramp.

  17. Monitoring of the Structural Integrity of Wheelset Axles Using Guided Waves

    OpenAIRE

    Grzeszkowski, Mateusz; Prager, Jens

    2014-01-01

    International audience; The structural integrity of wheelset axles of high speed trains as well as freight wagons is of major importance for safety of rail transport. Up to now the inspection of wheelset axles is part of a periodic maintenance which is expensive due to long inspection times and highly influenced by the human factor, especially if those inspections are carried out during night time. Permanently installed SHM-systems at each axle would be able to monitor the structural integrit...

  18. Soluble AXL: a possible circulating biomarker for neurofibromatosis type 1 related tumor burden.

    Science.gov (United States)

    Johansson, Gunnar; Peng, Po-Chun; Huang, Po-Yuan; Chien, Hsiung-Fei; Hua, Kuo-Tai; Kuo, Min-Liang; Chen, Chin-Tin; Lee, Ming-Jen

    2014-01-01

    Neurofibromatosis type 1 (NF1) is the most common tumor predisposition disorder affecting 1/3500 worldwide. Patients are at risk of developing benign (neurofibromas) and malignant peripheral nerve sheath tumors (MPNST). The AXL receptor tyrosine kinase has been implicated in several kinds of cancers, but so far no studies have investigated the role of AXL in NF1 related tumorigenesis. Recently, the soluble fraction from the extracellular domain of AXL (sAXL) has been found in human plasma, and its level was correlated to poor prognosis in patients with renal cancer. Compared to normal human Schwann cells, a significantly high expression level of AXL was found in three of the four MPNST cell lines and two of the three primary MPNST tissues. Similarly, the level of sAXL in conditioned media corresponded to the protein and mRNA levels of AXL in the MPNST cell lines. Furthermore, in two different human MPNST xenograft models, the human sAXL could be detected in the mouse plasma. Its level was proportionate to the size of the xenograft tumors, while no human sAXL was detect prior to the formation of the tumors. Treatment with a newly developed photodynamic therapy, prevented further tumor growth and resulted in drastically reduced the levels of sAXL compared to that of the control group. Finally, the level of sAXL was significantly increased in patients with plexiform tumors compared to patients with only dermal neurofibromas, further supporting the role of sAXL as a marker for NF1 related tumor burden.

  19. Soluble AXL: a possible circulating biomarker for neurofibromatosis type 1 related tumor burden.

    Directory of Open Access Journals (Sweden)

    Gunnar Johansson

    Full Text Available Neurofibromatosis type 1 (NF1 is the most common tumor predisposition disorder affecting 1/3500 worldwide. Patients are at risk of developing benign (neurofibromas and malignant peripheral nerve sheath tumors (MPNST. The AXL receptor tyrosine kinase has been implicated in several kinds of cancers, but so far no studies have investigated the role of AXL in NF1 related tumorigenesis. Recently, the soluble fraction from the extracellular domain of AXL (sAXL has been found in human plasma, and its level was correlated to poor prognosis in patients with renal cancer. Compared to normal human Schwann cells, a significantly high expression level of AXL was found in three of the four MPNST cell lines and two of the three primary MPNST tissues. Similarly, the level of sAXL in conditioned media corresponded to the protein and mRNA levels of AXL in the MPNST cell lines. Furthermore, in two different human MPNST xenograft models, the human sAXL could be detected in the mouse plasma. Its level was proportionate to the size of the xenograft tumors, while no human sAXL was detect prior to the formation of the tumors. Treatment with a newly developed photodynamic therapy, prevented further tumor growth and resulted in drastically reduced the levels of sAXL compared to that of the control group. Finally, the level of sAXL was significantly increased in patients with plexiform tumors compared to patients with only dermal neurofibromas, further supporting the role of sAXL as a marker for NF1 related tumor burden.

  20. Influence of axle-wheel interface on ultrasonic testing of fatigue cracks in wheelset.

    OpenAIRE

    Makino, Kazunari; Biwa, Shiro

    2013-01-01

    For the ultrasonic testing at the wheel seat of railway axles, quantitative investigation of the reflection and transmission phenomena at the axle-wheel interface is important. This paper describes the influence of the axle-wheel interface on the ultrasonic testing of a fatigue crack in a wheelset by applying the spring interface model. The normal and tangential stiffnesses were identified experimentally for an as-manufactured wheelset at the normal incidence, and the reflection coefficient f...

  1. Axl is not an indispensable factor for Zika virus infection in mice.

    Science.gov (United States)

    Wang, Zhao-Yang; Wang, Zai; Zhen, Zi-Da; Feng, Kai-Hao; Guo, Jing; Gao, Na; Fan, Dong-Ying; Han, Dai-Shu; Wang, Pei-Gang; An, Jing

    2017-08-01

    Recently, Zika virus (ZIKV) outbreak has been associated with a sharp increase in cases of Guillain-Barré syndrome and severe fetal abnormalities. However, the mechanism underlying the interaction of ZIKV with host cells is not yet clear. Axl, a receptor tyrosine kinase, is postulated as a receptor for ZIKV entry; however, its in vivo role during ZIKV infection and its impact on the outcome of the disease have not been fully characterized and evaluated. Moreover, there are contradictory results on its involvement in ZIKV infection. Here we utilized Axl-deficient mice (Axl-/-) and their littermates (Axl+/-) to study the in vivo role of Axl in ZIKV infection. Our results showed that both Axl+/- and Axl-/- suckling mice supported the replication of ZIKV and presented clinical manifestations. No significant difference has been found between Axl-deficient mice and their littermates in terms of the survival rate, clinical manifestations, viral load, ZIKV distribution and histopathological changes in major organs. These results therefore indicate that Axl is not an indispensable factor for ZIKV infection in mice.

  2. A promiscuous liaison between IL-15 receptor and Axl receptor tyrosine kinase in cell death control.

    Science.gov (United States)

    Budagian, Vadim; Bulanova, Elena; Orinska, Zane; Thon, Lutz; Mamat, Uwe; Bellosta, Paola; Basilico, Claudio; Adam, Dieter; Paus, Ralf; Bulfone-Paus, Silvia

    2005-12-21

    Discrimination between cytokine receptor and receptor tyrosine kinase (RTK) signaling pathways is a central paradigm in signal transduction research. Here, we report a 'promiscuous liaison' between both receptors that enables interleukin (IL)-15 to transactivate the signaling pathway of a tyrosine kinase. IL-15 protects murine L929 fibroblasts from tumor necrosis factor alpha (TNFalpha)-induced cell death, but fails to rescue them upon targeted depletion of the RTK, Axl; however, Axl-overexpressing fibroblasts are TNFalpha-resistant. IL-15Ralpha and Axl colocalize on the cell membrane and co-immunoprecipitate even in the absence of IL-15, whereby the extracellular part of Axl proved to be essential for Axl/IL-15Ralpha interaction. Most strikingly, IL-15 treatment mimics stimulation by the Axl ligand, Gas6, resulting in a rapid tyrosine phosphorylation of both Axl and IL-15Ralpha, and activation of the phosphatidylinositol 3-kinase/Akt pathway. This is also seen in mouse embryonic fibroblasts from wild-type but not Axl-/- or IL-15Ralpha-/- mice. Thus, IL-15-induced protection from TNFalpha-mediated cell death involves a hitherto unknown IL-15 receptor complex, consisting of IL-15Ralpha and Axl RTK, and requires their reciprocal activation initiated by ligand-induced IL-15Ralpha.

  3. Impact of surface type, wheelchair weight, and axle position on wheelchair propulsion by novice older adults.

    Science.gov (United States)

    Cowan, Rachel E; Nash, Mark S; Collinger, Jennifer L; Koontz, Alicia M; Boninger, Michael L

    2009-07-01

    To examine the impact of surface type, wheelchair weight, and rear axle position on older adult propulsion biomechanics. Crossover trial. Biomechanics laboratory. Convenience sample of 53 ambulatory older adults with minimal wheelchair experience (65-87y); men, n=20; women, n=33. Participants propelled 4 different wheelchair configurations over 4 surfaces: tile, low carpet, high carpet, and an 8% grade ramp (surface, chair order randomized). Chair configurations included (1) unweighted chair with an anterior axle position, (2) 9.05 kg weighted chair with an anterior axle position, (3) unweighted chair with a posterior axle position (Delta0.08 m), and (4) 9.05 kg weighted chair with a posterior axle position (Delta0.08 m). Weight was added to a titanium folding chair, simulating the weight difference between very light and depot wheelchairs. Instrumented wheels measured propulsion kinetics. Average self-selected velocity, push frequency, stroke length, peak resultant and tangential force. Velocity decreased as surface rolling resistance or chair weight increased. Peak resultant and tangential forces increased as chair weight increased, as surface resistance increased, and with a posterior axle position. The effect of a posterior axle position was greater on high carpet and the ramp. The effect of weight was constant, but was more easily observed on high carpet and ramp. The effects of axle position and weight were independent of one another. Increased surface resistance decreases self-selected velocity and increases peak forces. Increased weight decreases self-selected velocity and increases forces. Anterior axle positions decrease forces, more so on high carpet. The effects of weight and axle position are independent. The greatest reductions in peak forces occur in lighter chairs with anterior axle positions.

  4. Axl receptor tyrosine kinase is a novel target of apigenin for the inhibition of cell proliferation.

    Science.gov (United States)

    Kim, Kyung-Chan; Choi, Eun-Ha; Lee, Chuhee

    2014-08-01

    The Axl receptor tyrosine kinase (RTK), along with Tyro 3 and Mer, belongs to the TAM subfamily that promotes survival, stimulates proliferation and/or inhibits apoptosis. In various types of human cancer, including breast, lung and prostate cancer, Axl expression is increased and correlates with an advanced clinical stage. In this study, we examined whether apigenin has an effect on Axl expression, which in turn can affect cell proliferation. The treatment of the non‑small cell lung cancer (NSCLC) cells, A549 and H460, with apigenin decreased Axl mRNA and protein expression in a dose‑dependent manner. Axl promoter activity was also inhibited by apigenin, indicating that apigenin suppressed Axl expression at the transcriptional level. Upon treatment with apigenin, the viability of both the A549 and H460 cells was gradually decreased and the anti-proliferative effects were further confirmed by the dose‑dependent decrease in the clonogenic ability of the apigenin‑treated cells. Subsequently, we found that the viability and clonogenic ability of the cells treated with apigenin was less or more affected by transfection of the cells with a Axl-expressing plasmid or Axl targeting siRNA, compared to transfection with the empty vector or control siRNA, respectively. In addition, apigenin increased the expression of p21, a cyclin-dependent kinase inhibitor, but reduced the expression of X-linked inhibitor of apoptosis protein (XIAP). These cell cycle arrest and pro-apoptotic effects of apigenin were also attenuated or augmented by the up- or downregulation of Axl expression, respectively, which suggests that Axl is a novel target of apigenin through which it exerts its inhibitory effects on cell proliferation. Taken together, our data indicate that apigenin downregulates Axl expression, which subsequently results in the inhibition of NSCLC cell proliferation through the increase and decrease of p21 and XIAP expression, respectively.

  5. Axl Mediates ZIKA Virus Entry in Human Glial Cells and Modulates Innate Immune Responses

    Directory of Open Access Journals (Sweden)

    Laurent Meertens

    2017-01-01

    Full Text Available ZIKA virus (ZIKV is an emerging pathogen responsible for neurological disorders and congenital microcephaly. However, the molecular basis for ZIKV neurotropism remains poorly understood. Here, we show that Axl is expressed in human microglia and astrocytes in the developing brain and that it mediates ZIKV infection of glial cells. Axl-mediated ZIKV entry requires the Axl ligand Gas6, which bridges ZIKV particles to glial cells. Following binding, ZIKV is internalized through clathrin-mediated endocytosis and traffics to Rab5+ endosomes to establish productive infection. During entry, the ZIKV/Gas6 complex activates Axl kinase activity, which downmodulates interferon signaling and facilitates infection. ZIKV infection of human glial cells is inhibited by MYD1, an engineered Axl decoy receptor, and by the Axl kinase inhibitor R428. Our results highlight the dual role of Axl during ZIKV infection of glial cells: promoting viral entry and modulating innate immune responses. Therefore, inhibiting Axl function may represent a potential target for future antiviral therapies.

  6. Expression of Axl and its prognostic significance in human breast cancer

    Science.gov (United States)

    Jin, Gaoyuan; Wang, Zhenzhen; Wang, Jianguang; Zhang, Like; Chen, Yanbin; Yuan, Pengfei; Liu, Dechun

    2017-01-01

    Breast cancer is the most common malignant cancer and second leading cause of cancer-related death among women, and its prevalence continues to increase. Axl overexpression has been identified in the many types of human cancer, and it has been demonstrated to participate in signaling pathways related to carcinogenesis and cancer development. In the present study, Axl expression was examined by performing immunohistochemical staining in 60 breast cancer tumors and 40 benign breast lesions (25 mammary dysplasia and 15 breast fibroadenoma). In total, 34 (56.67%) cancer tissues and 13 (32.5%) benign breast lesions were classified as exhibiting high levels of Axl expression, indicating a significant association between malignancy and high Axl expression. High Axl expression was also associated with estrogen receptor (ER) positivity (P=0.028), progesterone receptor (PR) positivity (P=0.007), and poor tumor differentiation (P=0.033). No significant associations were observed between Axl expression and age, tumor size, lymph node metastasis, tumor node metastasis staging, human epidermal growth factor receptor 2 and Ki67 antigen. The Kaplan-Meier survival analysis and Cox proportional hazard model both demonstrated that there was no statistical difference between Axl expression and breast cancer prognosis. However, it remains unclear whether the expression of Axl is correlated with the prognosis of luminal type breast cancer patients. PMID:28356938

  7. 49 CFR 230.100 - Defects in tender truck axles and journals.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defects in tender truck axles and journals. 230... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning...

  8. Analysis of Tendencies Towards Changes in Temperatures of Railway Vehicle Axle Boxes

    Directory of Open Access Journals (Sweden)

    Olegas Lunys

    2012-11-01

    Full Text Available The paper analyzes variations in the temperature of axle-box heating of railroad rolling stock considering two modes of the train - driving and parking position. Additionally, the article describes the influence of the axle load and season on the heat of the axle-box, forecasts intolerable residual resources and explains a possibility of detecting likely breakage at the very beginning of defects. The paper also deals with scientific literature related to axle-box heating and focuses on the conducted practical and theoretical experiments. The carried out research has established the rates of operating heating and critical heating. The application of numerical values for the algorithm of automatic control devices could help with detecting the breakdowns of the axle-box before they reach a critical state and assist in forecasting residual operating resources.

  9. Heating Processes Of The Axle-Boxes Of Rolling-Stock On Railway Track Curves

    Directory of Open Access Journals (Sweden)

    Olegas Lunys

    2013-12-01

    Full Text Available The article deals with the heating process of the axle-boxes ofrolling stock when the train is in motion and discusses the forcesacting on the wheel-set when rolling stock moves along the trackcurves. The paper analyses scientific publications relevant tothe forces acting on the wheel-set of rolling stock and focuseson the axle-box heating process. The article also discusses theresults of theoretical studies on wheel-set forces that affect theheat exchange process of axle-boxes for a railway vehicle. Theresearch has determined a change in heating temperatures ofdifferent axle-boxes of rolling stock and reasons for their variationsand tendencies. The paper has estimated an effect of thetrain running along the track curves on the heating intensity ofthe axle-box. Finally, valid conclusions and recommendationshave been provided.

  10. EVALUATION OF DYNAMIC INDICATORS OF SIX-AXLE LOCOMOTIVE

    Directory of Open Access Journals (Sweden)

    S. V. Myamlin

    2015-04-01

    Full Text Available Purpose. The paper is devoted to dynamic characteristics evaluation of the locomotive with prospective design and determination the feasibility of its use on the Ukrainian railways. Methodology. The methods of mathematical and computer modeling of the dynamics of railway vehicles, as well as methods for the numerical integration of systems of ordinary nonlinear differential equations were used to solve the problem. Findings. The calculated diagram of a locomotive on three-axle bogies was built to solve the problem, and it is a system of rigid bodies connected by various elements of rheology. The mathematical model of the locomotive movement, allowing studying its spatial vibrations at driving on straight and curved sections of the track with random irregularities in plan and profile was developed with use of this calculated diagram. At compiling the mathematical model took into account both geometric (nonlinearity profile of the wheel roll surface and physical nonlinearity of the system (the work forces of dry friction, nonlinearity characteristics of interaction forces between wheels and rails. The multivariate calculations, which allowed assessing the dynamic qualities of the locomotive at its movement along straight and curved sections of the track, were realized with the use of computer modeling. The smoothness movement indicators of the locomotive in horizontal and vertical planes, frame strength, coefficients of vertical dynamics in the first and second stages of the suspension, the load factor of resistance against the derailment of the wheel from the rail were determined at the period of research. In addition, a comparison of the obtained results with similar characteristics is widely used on the Ukrainian railways in six-axle locomotive TE 116. The influence of speed and technical state of the track on the locomotive traffic safety was determined.Originality. A mathematical model of the spatial movement of a six-axle locomotive with

  11. Multi-axle dynamic steering system of truck-howitzer

    Institute of Scientific and Technical Information of China (English)

    Yanliang LI; Xiuhua GAO; Chunqiu ZHANG; Yubo SUN

    2008-01-01

    A two-degree-of-freedom (2-DOF) steering model of multi-axle vehicle was established. The steering center position, the relationship between the steering angle and the vehicle velocity, and the minimum turn radius were deduced on the basis of the proportional control with a zero sideslip angle. Results indicate that the system stability is decided by the vehicle barycenter position and the lateral stiffness of a tire. Under this control, the steady value of the lateral acceleration is obviously diminished and the yaw angular velocity changes little under any vehicle velocity. The system rapidly responds, the vehicle smoothly steers, and its handling stability is prominently improved.

  12. Gross decontamination experiment report

    Energy Technology Data Exchange (ETDEWEB)

    Mason, R.; Kinney, K.; Dettorre, J.; Gilbert, V.

    1983-07-01

    A Gross Decontamination Experiment was conducted on various levels and surfaces of the TMI - Unit 2 reactor building in March 1982. The polar crane, D-rings, missile shields, refueling canals, refueling bridges, equipment, and elevations 305' and 347'-6'' were flushed with low pressure water. Additionally, floor surfaces on elevation 305' and floor surfaces and major pieces of equipment on elevation 347'-6'' were sprayed with high pressure water. Selective surfaces were decontaminated with a mechanical scrubber and chemicals. Strippable coating was tested and evaluated on equipment and floor surfaces. The effectiveness, efficiency, and safety of several decontamination techniques were established for the large, complex decontamination effort. Various decontamination equipment was evaluated and its effectiveness was documented. Decontamination training and procedures were documented and evaluated, as were the support system and organization for the experiment.

  13. Oxidative stress enhances Axl-mediated cell migration through an Akt1/Rac1-dependent mechanism.

    Science.gov (United States)

    Huang, Jhy-Shrian; Cho, Chun-Yu; Hong, Chih-Chen; Yan, Ming-De; Hsieh, Mao-Chih; Lay, Jong-Ding; Lai, Gi-Ming; Cheng, Ann-Lii; Chuang, Shuang-En

    2013-12-01

    Persistent oxidative stress is common in cancer cells because of abnormal generation of reactive oxygen species (ROS) and has been associated with malignant phenotypes, such as chemotherapy resistance and metastasis. Both overexpression of Axl and abnormal ROS elevation have been linked to cell transformation and increased cell migration. However, the relationship between Axl and ROS in malignant cell migration has not been previously evaluated. Using an in vitro human lung cancer model, we examined the redox state of lung adenocarcinoma cell lines of low metastatic (CL1-0) and high metastatic (CL1-5) potentials. Here we report that Axl activation elicits ROS accumulation through the oxidase-coupled small GTPase Rac1. We also observed that oxidative stress could activate Axl phosphorylation to synergistically enhance cell migration. Further, Axl signaling activated by H2O2 treatment results in enhancement of cell migration via a PI3K/Akt-dependent pathway. The kinase activity of Axl is required for the Axl-mediated cell migration and prolongs the half-life of phospho-Akt under oxidative stress. Finally, downregulation of Akt1, but not Akt2, by RNAi in Axl-overexpressing cells inhibits the amount of activated Rac1 and the ability to migrate induced by H2O2 treatment. Together, these results show that a novel Axl-signaling cascade induced by H2O2 treatment triggers cell migration through the PI3K/Akt1/Rac1 pathway. Elucidation of redox regulation in Axl-related malignant migration may provide new molecular insights into the mechanisms underlying tumor progression.

  14. Role of AXL expression in non-small cell lung cancer.

    Science.gov (United States)

    Qu, Xiaohan; Liu, Jinlu; Zhong, Xinwen; Li, Xi; Zhang, Qigang

    2016-12-01

    The present study aimed to investigate the expression profile of AXL in non-small cell lung cancer (NSCLC) and its clinical significance. The current study included 257 NSCLC patients, tyrosine-protein kinase receptor UFO (AXL) expression in paired lung cancer and adjacent normal lung tissues of NSCLC patients were compared by immunohistochemistry, western blot analysis and quantitative polymerase chain reaction (qPCR). These methods were used to detect the expression of the AXL gene and protein in fresh tissues from 35 patients. Small interfering RNA (siRNA) was transfected into the H1299 lung cancer cell line to knock down AXL expression; the effects of AXL-siRNA on cell proliferation and migration were examined by MTT and Transwell migration assay, respectively. It was found that AXL staining density in lung cancer tissues was significantly increased compared with adjacent normal lung tissues (55.25 vs. 26.85%; P<0.01); and the expression level of AXL in NSCLC patients was significantly associated with the degree of tumor differentiation (P<0.01) and the clinical stage of disease (P<0.01). Western blotting and qPCR showed that AXL expression was significantly higher in cancer tissues compared with that in adjacent lung tissue (P<0.05). Additionally, the current study also showed that AXL-siRNA inhibited H1299 cell proliferation and migration in vitro. The present study demonstrates the association between increased expression of AXL in NSCLC and the low differentiation phenotype, and its effects on cell proliferation and migration, suggesting its potential clinical values for the prognosis of NSCLC.

  15. Failure analysis of axle shaft of a fork lift

    Directory of Open Access Journals (Sweden)

    Souvik Das

    2015-04-01

    Full Text Available An axle shaft of fork lift failed at operation within 296 h of service. The shaft transmits torque from discrepancy to wheel through planetary gear arrangement. A section of fractured axle shaft made of induction-hardened steel was analyzed to determine the root cause of the failure. Optical microscopies as well as field emission gun scanning electron microscopy (FEG-SEM along with energy dispersive spectroscopy (EDS were carried out to characterize the microstructure. Hardness profile throughout the cross-section was evaluated by micro-hardness measurements. Chemical analysis indicated that the shaft was made of 42CrMo4 steel grade as per specification. Microstructural analysis and micro-hardness profile revealed that the shaft was improperly heat treated resulting in a brittle case, where crack was found to initiate from the case in a brittle mode in contrast to ductile mode within the core. This behaviour was related to differences in microstructure, which was observed to be martensitic within the case with a micro-hardness equivalent to 735 HV, and a mixture of non-homogeneous structure of pearlite and ferrite within the core with a hardness of 210 HV. The analysis suggests that the fracture initiated from the martensitic case as brittle mode due to improper heat treatment process (high hardness. Moreover the inclusions along the hot working direction i.e. in the longitudinal axis made the component more susceptible to failure.

  16. Recent progress on the role of Axl, a receptor tyrosine kinase, in malignant transformation of myeloid leukemias.

    Science.gov (United States)

    Neubauer, A; Burchert, A; Maiwald, C; Gruss, H J; Serke, S; Huhn, D; Wittig, B; Liu, E

    1997-03-01

    Receptor tyrosine kinases (RTK) play an important role in the signal transduction of normal and malignant cells. There are different families of RTKs which are mainly characterized by differences in the ligang-binding extracellular domains. Axl (or UFO/Ark) is the first member of a new class of RTK with two fibronectin type III domains and two immunoglobulin-like domains present at the extracellular domain. The axl-gene has been isolated by means of gene transfection studies using DNA of patients with chronic myelogeneous leukemia. For a previous and the present study, we used a sensitive reverse-transcriptase polymerase chain reaction assay to detect axl's mRNA in cells from normal and malignant hematopoietic tissue. Axl's mRNA expression was mainly detected in myelo-monocytic cells, whereas much weaker transcription was seen in lymphatic cells and in lymphatic leukemias. In normal bone marrow, axl was heavily transcribed in marrow stromal cells. Further, we analysed Axl protein expression using monoclonal antibody M50 in peripheral stem cell harvests; in most harvests, no co-expression of CD34 and Axl was detected. However, in one patient with AML in complete remission, Axl was co-expressed on 80% of the CD34-positive population. These data show that axl is preferentially expressed in monocytes and stromal cells. Furthermore, a fraction of CD34-positive progenitor cells may express Axl. The exact mechanism for transformation of myeloid progenitor cells through Axl, however, remains to be determined.

  17. Gas6/Axl pathway promotes tumor invasion through the transcriptional activation of Slug in hepatocellular carcinoma.

    Science.gov (United States)

    Lee, Hsin-Jung; Jeng, Yung-Ming; Chen, Yu-Ling; Chung, Ling; Yuan, Ray-Hwang

    2014-04-01

    Hepatocellular carcinoma (HCC) is one of the most common fatal cancers worldwide. Other than the sorafenib treatment, no effective systemic therapy has been available thus far. Most targets in molecularly targeted therapy for cancer are receptor tyrosine kinases (RTKs). Therefore, identifying activated RTKs in HCC is critical for developing new molecularly targeted therapies. Using a phospho-RTK array, we found that Axl is one of the most frequently activated RTKs in liver cancer cell lines. The knockdown of Axl by RNA interference significantly reduced cell migration and invasion in the HCC cell lines HA22T and Mahlavu. Stimulation of HCC cell lines by Axl ligand growth arrest-specific 6 (Gas6) enhanced cell migration and invasion. The Gas6/Axl pathway enhanced the expression of the epithelial-mesenchymal transition-inducing transcription factor Slug, which is essential for the invasion-promoting activity of Axl. Treating HCC cells with the Axl inhibitor bosutinib suppressed Slug expression and decreased the invasiveness of HCC cell lines. These findings indicate that Gas6/Axl regulates tumor invasion through the transcriptional activation of Slug.

  18. Axl tyrosine kinase protects against tubulo-interstitial apoptosis and progression of renal failure in a murine model of chronic kidney disease and hyperphosphataemia.

    Directory of Open Access Journals (Sweden)

    Gareth D Hyde

    Full Text Available Chronic kidney disease (CKD is defined as the progressive loss of renal function often involving glomerular, tubulo-interstitial and vascular pathology. CKD is associated with vascular calcification; the extent of which predicts morbidity and mortality. However, the molecular regulation of these events and the progression of chronic kidney disease are not fully elucidated. To investigate the function of Axl receptor tyrosine kinase in CKD we performed a sub-total nephrectomy and fed high phosphate (1% diet to Axl+/+ and Axl-/- mice. Plasma Gas6 (Axl' ligand, renal Axl expression and downstream Akt signalling were all significantly up-regulated in Axl+/+ mice following renal mass reduction and high phosphate diet, compared to age-matched controls. Axl-/- mice had significantly enhanced uraemia, reduced bodyweight and significantly reduced survival following sub-total nephrectomy and high phosphate diet compared to Axl+/+ mice; only 45% of Axl-/- mice survived to 14 weeks post-surgery compared to 87% of Axl+/+ mice. Histological analysis of kidney remnants revealed no effect of loss of Axl on glomerular hypertrophy, calcification or renal sclerosis but identified significantly increased tubulo-interstitial apoptosis in Axl-/- mice. Vascular calcification was not induced in Axl+/+ or Axl-/- mice in the time frame we were able to examine. In conclusion, we identify the up-regulation of Gas6/Axl signalling as a protective mechanism which reduces tubulo-interstitial apoptosis and slows progression to end-stage renal failure in the murine nephrectomy and high phosphate diet model of CKD.

  19. Axl tyrosine kinase protects against tubulo-interstitial apoptosis and progression of renal failure in a murine model of chronic kidney disease and hyperphosphataemia.

    Science.gov (United States)

    Hyde, Gareth D; Taylor, Rebecca F; Ashton, Nick; Borland, Samantha J; Wu, Hon Sing Geoffrey; Gilmore, Andrew P; Canfield, Ann E

    2014-01-01

    Chronic kidney disease (CKD) is defined as the progressive loss of renal function often involving glomerular, tubulo-interstitial and vascular pathology. CKD is associated with vascular calcification; the extent of which predicts morbidity and mortality. However, the molecular regulation of these events and the progression of chronic kidney disease are not fully elucidated. To investigate the function of Axl receptor tyrosine kinase in CKD we performed a sub-total nephrectomy and fed high phosphate (1%) diet to Axl+/+ and Axl-/- mice. Plasma Gas6 (Axl' ligand), renal Axl expression and downstream Akt signalling were all significantly up-regulated in Axl+/+ mice following renal mass reduction and high phosphate diet, compared to age-matched controls. Axl-/- mice had significantly enhanced uraemia, reduced bodyweight and significantly reduced survival following sub-total nephrectomy and high phosphate diet compared to Axl+/+ mice; only 45% of Axl-/- mice survived to 14 weeks post-surgery compared to 87% of Axl+/+ mice. Histological analysis of kidney remnants revealed no effect of loss of Axl on glomerular hypertrophy, calcification or renal sclerosis but identified significantly increased tubulo-interstitial apoptosis in Axl-/- mice. Vascular calcification was not induced in Axl+/+ or Axl-/- mice in the time frame we were able to examine. In conclusion, we identify the up-regulation of Gas6/Axl signalling as a protective mechanism which reduces tubulo-interstitial apoptosis and slows progression to end-stage renal failure in the murine nephrectomy and high phosphate diet model of CKD.

  20. Development of a Test Machine for IVECO Drive Axle

    Institute of Scientific and Technical Information of China (English)

    WANG Liang-mo; WANG He-fu; CHEN Jin-rong; LING Zhi-liang; CAO Yu-hua

    2007-01-01

    To improve the automation level of the vehicle drive axle test and better simulate a vehicle′s actual operation, an advanced test machine has been developed. The load system of the machine consists of hand brakes and electric cylinders. It is simple-structured and low-cost. The major motor of the machine is controlled by a transducer and its speed can be adjusted easily. In addition, the programmed machine can automatically test such parameters as the grinding condition, the differential speed, the noise level, etc. It can also adjust the test procedures according to different requirements. Detailed discussion of the structure and mechanism of the test machine is given in this paper.

  1. MicroPET/CT Imaging of AXL Downregulation by HSP90 Inhibition in Triple-Negative Breast Cancer

    Directory of Open Access Journals (Sweden)

    Wanqin Wang

    2017-01-01

    Full Text Available AXL receptor tyrosine kinase is overexpressed in a number of solid tumor types including triple-negative breast cancer (TNBC. AXL is considered an important regulator of epithelial-to-mesenchymal transition (EMT and a potential therapeutic target for TNBC. In this work, we used microPET/CT with 64Cu-labeled anti-human AXL antibody (64Cu-anti-hAXL to noninvasively interrogate the degradation of AXL in vivo in response to 17-allylamino-17-demethoxygeldanamycin (17-AAG, a potent inhibitor of HSP90. 17-AAG treatment caused significant decline in AXL expression in orthotopic TNBC MDA-MB-231 tumors, inhibited EMT, and delayed tumor growth in vivo, resulting in significant reduction in tumor uptake of 64Cu-anti-hAXL as clearly visualized by microPET/CT. Our data indicate that 64Cu-anti-hAXL can be useful for monitoring anti-AXL therapies and for assessing inhibition of HSP90 molecular chaperone using AXL as a molecular surrogate.

  2. An Experimental Study on Hysteresis Characteristics of a Pneumatic Braking System for a Multi-Axle Heavy Vehicle in Emergency Braking Situations

    Directory of Open Access Journals (Sweden)

    Zhe Wang

    2017-08-01

    Full Text Available This study aims to investigate the hysteresis characteristics of a pneumatic braking system for multi-axle heavy vehicles (MHVs. Hysteresis affects emergency braking performance severely. The fact that MHVs have a large size and complex structure leads to more nonlinear coupling property of the pneumatic braking system compared to normal two-axle vehicles. Thus, theoretical analysis and simulation are not enough when studying hysteresis. In this article, the hysteresis of a pneumatic brake system for an eight-axle vehicle in an emergency braking situation is studied based on a novel test bench. A servo drive device is applied to simulate the driver’s braking intensions normally expressed by opening or moving speed of the brake pedal. With a reasonable arrangement of sensors and the NI LabVIEW platform, both the delay time of eight loops and the response time of each subassembly in a single loop are detected in real time. The outcomes of the experiment show that the delay time of each loop gets longer with the increase of pedal opening, and a quadratic relationship exists between them. Based on this, the pressure transient in the system is fitted to a first-order plus time delay model. Besides, the response time of treadle valve and controlling pipeline accounts for more than 80% of the loop’s total delay time, indicating that these two subassemblies are the main contributors to the hysteresis effect.

  3. Vibration levels on rear and front axles of a tractor in agricultural operations - doi: 10.4025/actascitechnol.v36i1.18170

    Directory of Open Access Journals (Sweden)

    Geice Paula Villibor

    2014-01-01

    Full Text Available Excessive vibrations in agricultural tractors can contribute with mechanical failures and subject the operator to discomfort. This work evaluated the vibration levels on rear and front axles of an agricultural tractor working at different forward speeds and wheel drive conditions in plowing and harrowing operations. Field tests were carried out in a completely randomized design in a factorial arrangement 3 x 2 (forward travel speeds x front-wheel-assist enable or disable, with three replications. Tractor vibration was measured using two single axis accelerometers fixed above the rear and front axles. The actual forward speed of the tractor was obtained by means of ultrasonic radar and the angular velocity of the wheels was measured with magnetic transducers. The drawbar force to pull the disc harrow was obtained by a load cell. The results showed that the vibration levels observed for the plowing operation were higher than observed for the harrowing operation. When the front-wheel-assist (FWA was enabled there was a reduction in vertical vibration levels of the tractor axles. The highest vibration levels were observed in the frequency range of 2 to 4Hz for the both soil tillage operations evaluated

  4. CONOCOPHILLIPS FUEL EFFICIENT HIGH-PERFORMANCE(FEHP) SAE 75W90 REAR AXLE GEAR LUBRICANT

    Science.gov (United States)

    This report is on the Environmental Verification Test of a ConocoPhillips real axle gear lubricant to determine whether it could save vehicle fuel. It determined that a verifyable fuel savings could be measured.

  5. Cyclic Fracture Toughness of Railway Axle and Mechanisms of its Fatigue Fracture

    Directory of Open Access Journals (Sweden)

    Sorochak Andriy

    2015-06-01

    Full Text Available The main regularities in fatigue fracture of the railway axle material - the OSL steel - are found in this paper. Micromechanisms of fatigue crack propagation are described and systematized, and a physical-mechanical interpretation of the relief morphology at different stages of crack propagation is proposed for fatigue cracks in specimens cut out of the surface, internal and central layers of the axle.

  6. Prerequisites for Increasing the Axle Load on Railway Tracks in the Czech Republic

    Directory of Open Access Journals (Sweden)

    M. Lidmila

    2008-01-01

    Full Text Available This paper deals with problems of increasing the axle load on Czech Railways (ED tracks to 250 kN or 300 kN, respectively. The results of a numerical analysis of the effects of increased axle loads on the track bed structure were verified by experimental measurements carried out on track bed construction models in an experimental box on a 1:1 scale. The results of the research are applicable for routine use on ED. 

  7. AXL as a modulator of sunitinib response in glioblastoma cell lines

    OpenAIRE

    Martinho, Olga Catarina Lopes; Zucca, Luís Eduardo; Reis,R.M.

    2015-01-01

    Receptor tyrosine kinase (RTK) targeted therapy has been explored for glioblastoma treatment. However, it is unclear which RTK inhibitors are the most effective and there are no predictive biomarkers available. We recently identified the RTK AXL as a putative target for the pan-RTK inhibitors cediranib and sunitinib, which are under clinical trials for glioblastoma patients. Here, we provide evidence that AXL activity can modulate sunitinib response in glioblastoma cell lines. We found that A...

  8. Expression of Axl and its prognostic significance in human breast cancer

    OpenAIRE

    Jin, Gaoyuan; Wang, Zhenzhen; Wang, Jianguang; Zhang, Like; CHEN Yanbin; Yuan, Pengfei; Liu, Dechun

    2016-01-01

    Breast cancer is the most common malignant cancer and second leading cause of cancer-related death among women, and its prevalence continues to increase. Axl overexpression has been identified in the many types of human cancer, and it has been demonstrated to participate in signaling pathways related to carcinogenesis and cancer development. In the present study, Axl expression was examined by performing immunohistochemical staining in 60 breast cancer tumors and 40 benign breast lesions (25 ...

  9. Experimental investigation by laser ultrasonics for high speed train axle diagnostics.

    Science.gov (United States)

    Cavuto, A; Martarelli, M; Pandarese, G; Revel, G M; Tomasini, E P

    2015-01-01

    The present paper demonstrates the applicability of a laser-ultrasonic procedure to improve the performances of train axle ultrasonic inspection. The method exploits an air-coupled ultrasonic probe that detects the ultrasonic waves generated by a high-power pulsed laser. As a result, the measurement chain is completely non-contact, from generation to detection, this making it possible to considerably speed up inspection time and make the set-up more flexible. The main advantage of the technique developed is that it works in thermo-elastic regime and it therefore can be considered as a non-destructive method. The laser-ultrasonic procedure investigated has been applied for the inspection of a real high speed train axle provided by the Italian railway company (Trenitalia), on which typical fatigue defects have been expressly created according to standard specifications. A dedicated test bench has been developed so as to rotate the axle with the angle control and to speed up the inspection of the axle surface. The laser-ultrasonic procedure proposed can be automated and is potentially suitable for regular inspection of train axles. The main achievements of the activity described in this paper are: – the study of the effective applicability of laser-ultrasonics for the diagnostic of train hollow axles with variable sections by means of a numerical FE model, – the carrying out of an automated experiment on a real train axle, – the analysis of the sensitivity to experimental parameters, like laser source – receiving probe distance and receiving probe angular position, – the demonstration that the technique is suitable for the detection of surface defects purposely created on the train axle. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Gross job flows and firms

    OpenAIRE

    Scott Schuh; Robert K. Triest

    1999-01-01

    This paper extends the work of Dunne, Roberts, and Samuelson [3] and Davis, Haltiwanger, and Schuh [2] on gross job flows among manufacturing plants. Gross job creation, destruction, and reallocation have been shown to be important in understanding the birth, growth, and death of plants, and the relation of plant life cycles to the business cycle. However, little is known about job flows between firms or how job flows among plants occur within firms (corporate restructuring). We use informati...

  11. Novel wavelet threshold denoising method in axle press-fit zone ultrasonic detection

    Science.gov (United States)

    Peng, Chaoyong; Gao, Xiaorong; Peng, Jianping; Wang, Ai

    2017-02-01

    Axles are important part of railway locomotives and vehicles. Periodic ultrasonic inspection of axles can effectively detect and monitor axle fatigue cracks. However, in the axle press-fit zone, the complex interface contact condition reduces the signal-noise ratio (SNR). Therefore, the probability of false positives and false negatives increases. In this work, a novel wavelet threshold function is created to remove noise and suppress press-fit interface echoes in axle ultrasonic defect detection. The novel wavelet threshold function with two variables is designed to ensure the precision of optimum searching process. Based on the positive correlation between the correlation coefficient and SNR and with the experiment phenomenon that the defect and the press-fit interface echo have different axle-circumferential correlation characteristics, a discrete optimum searching process for two undetermined variables in novel wavelet threshold function is conducted. The performance of the proposed method is assessed by comparing it with traditional threshold methods using real data. The statistic results of the amplitude and the peak SNR of defect echoes show that the proposed wavelet threshold denoising method not only maintains the amplitude of defect echoes but also has a higher peak SNR.

  12. Vibroacoustic Modeling and Path Control of Air-Borne Axle Whine Noise

    Directory of Open Access Journals (Sweden)

    Dong Guo

    2014-08-01

    Full Text Available The axle whine noise will eventually affect the vehicle noise performance. In this study, a systematic modeling approach is developed to analyze the axle whine problem by considering the hypoid gear mesh from the tooth contact process as well as the system dynamics effect with gear design parameters and shaft-bearing-housing system taken into account. Moreover, the tuning of the dominant air-borne path is modeled analytically by using the sound transmission loss idea. First, gear tooth load distribution results are obtained in a 3-dimensional loaded tooth contact analysis program. Then mesh parameters are synthesized and applied to a linear multibody gear dynamic model to obtain dynamic mesh and bearing responses. The bearing responses are used as the excitation force to a housing finite element model. Finally, the vibroacoustic analysis of the axle is performed using the boundary element method; sound pressure responses in the axle surface are then simulated. Transmission losses of different panel partitions are included in the final stage to guide the tuning of air-borne paths to reduce the radiated axle whine noise. The proposed approach gives a more in-depth understanding of the axle whine generation and therefore can further facilitate the system design and trouble-shooting.

  13. Algorithm of dynamic stabilization system for a car 4x4 with a link rear axle

    Directory of Open Access Journals (Sweden)

    M. M. Jileikin

    2014-01-01

    Full Text Available The slow development of active safety systems of the automobile all-wheel drive vehicles is the cause of lack of researches in the field of power distribution under the specific conditions of movement. The purpose of work is to develop methods to control a curvilinear motion of 4x4 cars with a link to the rear axle that provides the increase in directional and trajectory stability of the car. The paper analyses the known methods to increase wheeled vehicles movement stability. It also offers a method for power flow redistribution in the transmission of the car 4x4 with a link to the rear axle, providing the increase in directional and trajectory stability of the car.To study the performance and effectiveness of the proposed method a mathematical model of the moving car 4x4 with a link to the rear axle is developed. Simulation methods allowed us to establish the following:1. for car 4x4 with redistribution of torque between the driving axles in the range of 100:0 - 50:50 and with redistribution of torque between the wheels of the rear axle in the range of 0:100 the most effective are the stabilization algorithms used in combination “Lowing power consumption of the engine +Creation of stabilizing the moment due to the redistribution of torque on different wheels", providing the increase in directional and trajectory stability by 12...93%;2. for car 4x4 with redistribution of torque between the driving axles in the range 100:0 - 0:100 and with redistribution of torque between the wheels of the rear axle in the range of 0:100 the best option is a combination of algorithms "Lowing power consumption of the engine + Creation of stabilizing moment due to redistribution of torques on different wheels", providing the increase in directional and trajectory stability by 27...93%.A comparative analysis of algorithms efficiency of dynamic stabilization system operation for two-axle wheeled vehicles depending on the torque redistribution between the driving

  14. On a question of Gross

    Science.gov (United States)

    Banerjee, Abhijit

    2007-03-01

    Using the notion of weighted sharing of sets we prove two uniqueness theorems which improve the results proved by Fang and Qiu [H. Qiu, M. Fang, A unicity theorem for meromorphic functions, Bull. Malaysian Math. Sci. Soc. 25 (2002) 31-38], Lahiri and Banerjee [I. Lahiri, A. Banerjee, Uniqueness of meromorphic functions with deficient poles, Kyungpook Math. J. 44 (2004) 575-584] and Yi and Lin [H.X. Yi, W.C. Lin, Uniqueness theorems concerning a question of Gross, Proc. Japan Acad. Ser. A 80 (2004) 136-140] and thus provide an answer to the question of Gross [F. Gross, Factorization of meromorphic functions and some open problems, in: Proc. Conf. Univ. Kentucky, Lexington, KY, 1976, in: Lecture Notes in Math., vol. 599, Springer, Berlin, 1977, pp. 51-69], under a weaker hypothesis.

  15. Heightened cleavage of Axl receptor tyrosine kinase by ADAM metalloproteases may contribute to disease pathogenesis in SLE.

    Science.gov (United States)

    Orme, Jacob J; Du, Yong; Vanarsa, Kamala; Mayeux, Jessica; Li, Li; Mutwally, Azza; Arriens, Cristina; Min, Soyoun; Hutcheson, Jack; Davis, Laurie S; Chong, Benjamin F; Satterthwaite, Anne B; Wu, Tianfu; Mohan, Chandra

    2016-08-01

    Systemic lupus erythematosus (SLE) is characterized by antibody-mediated chronic inflammation in the kidney, lung, skin, and other organs to cause inflammation and damage. Several inflammatory pathways are dysregulated in SLE, and understanding these pathways may improve diagnosis and treatment. In one such pathway, Axl tyrosine kinase receptor responds to Gas6 ligand to block inflammation in leukocytes. A soluble form of the Axl receptor ectodomain (sAxl) is elevated in serum from patients with SLE and lupus-prone mice. We hypothesized that sAxl in SLE serum originates from the surface of leukocytes and that the loss of leukocyte Axl contributes to the disease. We determined that macrophages and B cells are a source of sAxl in SLE and in lupus-prone mice. Shedding of the Axl ectodomain from the leukocytes of lupus-prone mice is mediated by the matrix metalloproteases ADAM10 and TACE (ADAM17). Loss of Axl from lupus-prone macrophages renders them unresponsive to Gas6-induced anti-inflammatory signaling in vitro. This phenotype is rescued by combined ADAM10/TACE inhibition. Mice with Axl-deficient macrophages develop worse disease than controls when challenged with anti-glomerular basement membrane (anti-GBM) sera in an induced model of nephritis. ADAM10 and TACE also mediate human SLE PBMC Axl cleavage. Collectively, these studies indicate that increased metalloprotease-mediated cleavage of leukocyte Axl may contribute to end organ disease in lupus. They further suggest dual ADAM10/TACE inhibition as a potential therapeutic modality in SLE.

  16. Activation of TYRO3/AXL tyrosine kinase receptors in thyroid cancer.

    Science.gov (United States)

    Avilla, Elvira; Guarino, Valentina; Visciano, Carla; Liotti, Federica; Svelto, Maria; Krishnamoorthy, Gnanaprakasam; Franco, Renato; Melillo, Rosa Marina

    2011-03-01

    Thyroid cancer is the most common endocrine cancer, but its key oncogenic drivers remain undefined. In this study we identified the TYRO3 and AXL receptor tyrosine kinases as transcriptional targets of the chemokine CXCL12/SDF-1 in CXCR4-expressing thyroid cancer cells. Both receptors were constitutively expressed in thyroid cancer cell lines but not normal thyroid cells. AXL displayed high levels of tyrosine phosphorylation in most cancer cell lines due to constitutive expression of its ligand GAS6. In human thyroid carcinoma specimens, but not in normal thyroid tissues, AXL and GAS6 were often coexpressed. In cell lines expressing both receptors and ligand, blocking each receptor or ligand dramatically affected cell viability and decreased resistance to apoptotic stimuli. Stimulation of GAS6-negative cancer cells with GAS6 increased their proliferation and survival. Similarly, siRNA-mediated silencing of AXL inhibited cancer cell viability, invasiveness, and growth of tumor xenografts in nude mice. Our findings suggest that a TYRO3/AXL-GAS6 autocrine circuit sustains the malignant features of thyroid cancer cells and that targeting the circuit could offer a novel therapeutic approach in this cancer. ©2011 AACR.

  17. Low MITF/AXL ratio predicts early resistance to multiple targeted drugs in melanoma

    Science.gov (United States)

    Müller, Judith; Krijgsman, Oscar; Tsoi, Jennifer; Robert, Lidia; Hugo, Willy; Song, Chunying; Kong, Xiangju; Possik, Patricia A.; Cornelissen-Steijger, Paulien D.M.; Foppen, Marnix H. Geukes; Kemper, Kristel; Goding, Colin R.; McDermott, Ultan; Blank, Christian; Haanen, John; Graeber, Thomas G.; Ribas, Antoni; Lo, Roger S.; Peeper, Daniel S.

    2015-01-01

    Increased expression of the Microphthalmia-associated transcription factor (MITF) contributes to melanoma progression and resistance to BRAF pathway inhibition. Here we show that the lack of MITF is associated with more severe resistance to a range of inhibitors, while its presence is required for robust drug responses. Both in primary and acquired resistance, MITF levels inversely correlate with the expression of several activated receptor tyrosine kinases, most frequently AXL. The MITF-low/AXL-high/drug-resistance phenotype is common among mutant BRAF and NRAS melanoma cell lines. The dichotomous behaviour of MITF in drug response is corroborated in vemurafenib-resistant biopsies, including MITF-high and -low clones in a relapsed patient. Furthermore, drug cocktails containing AXL inhibitor enhance melanoma cell elimination by BRAF or ERK inhibition. Our results demonstrate that a low MITF/AXL ratio predicts early resistance to multiple targeted drugs, and warrant clinical validation of AXL inhibitors to combat resistance of BRAF and NRAS mutant MITF-low melanomas. PMID:25502142

  18. DAMAGE TOLERANCE ANALYSIS ON HOLLOW AXLES OF HIGH SPEED MOTOR TRAINS

    Institute of Scientific and Technical Information of China (English)

    ZHOU Suxia; XIE Jilong; YANG Guangxue; XIAO Nan

    2008-01-01

    According to the rules of UIC515-3, the service loads of the axles are defined, which include some different loads cases as follows: the static loads; the impact loads resulted from running through the rail joints and unevenness rails; the loads through curves and from braking. Through the calculating and analysis, the stress distribution of the hollow axles is obtained for 200 km/h high speed motor trains used in China. At the same time, the fatigue crack growth of hollow axles is studied, and the initial surface cracks of 2 mm depth caused by hard objects strike or the other causes are discussed. On the basis of the linear elastic fracture mechanics theory, the stress intensity factor of the crack of the geometry transition outside the wheel seat is also studied. Associated with fatigue crack propagation equation and the corresponding crack propagation threshold, the crack propagation characteristics under different shapes are calculated. Then the running distances are educed with different shapes propagating to the critical length, and the estimation of the residual lives about hollow axles which are the reference values of examine and repair limit of the hollow axle is given.

  19. Fault Diagnosis of Train Axle Box Bearing Based on Multifeature Parameters

    Directory of Open Access Journals (Sweden)

    Xiaofeng Li

    2015-01-01

    Full Text Available Failure of the train axle box bearing will cause great loss. Now, condition-based maintenance of train axle box bearing has been a research hotspot around the world. Vibration signals generated by train axle box bearing have nonlinear and nonstationary characteristics. The methods used in traditional bearing fault diagnosis do not work well with the train axle box. To solve this problem, an effective method of axle box bearing fault diagnosis based on multifeature parameters is presented in this paper. This method can be divided into three parts, namely, weak fault signal extraction, feature extraction, and fault recognition. In the first part, a db4 wavelet is employed for denoising the original signals from the vibration sensors. In the second part, five time-domain parameters, five IMF energy-torque features, and two amplitude-ratio features are extracted. The latter seven frequency domain features are calculated based on the empirical mode decomposition and envelope spectrum analysis. In the third part, a fault classifier based on BP neural network is designed for automatic fault pattern recognition. A series of tests are carried out to verify the proposed method, which show that the accuracy is above 90%.

  20. Comparative Evaluation of Tractor Trolley Axle by Using Finite Element Analysis Approach

    Directory of Open Access Journals (Sweden)

    Sanjay Aloni

    2012-04-01

    Full Text Available Tractor trolley or trailers are very popular and cheaper mode of goods transport in rural as well as urban area. But these trailers are manufactured in small scale to moderate scale industry. Especially in the small- and middle-scale agricultural machinery industry, insufficient use of new technology and new design features can cause problems such as breakdowns and failures during field operations. In Present work finite element analysis approach is used to modify existing rear axle of tractor trolley. Fatigue failure of the rear axle finite element model was predicted after the dynamic load was imposed on it. For analysis, a 6.0 ton 2 wheeler tractor trolley i.e. semitrailer manufactured by Awachat Industries Ltd., Wardha is selected. The finite element analysis of existing rear axle of tractor trolley revealed the stresses distribution on rear axle. So, an effort is made to modify the design of existing rear axle along with change of material so that advantage of weight reduction along with safe stress can be obtained.

  1. Dynamic Characteristics of a New Machine for Fatigue Testing of Railway Axles – Part 2

    Directory of Open Access Journals (Sweden)

    Karel FRYDRÝŠEK

    2012-06-01

    Full Text Available There were done some proposal calculations for a new testing machine. This new testing machine is determined for a dynamic fatigue testing of railway axles. The railway axles are subjected to bending and rotation (centrifugal effects. For the right proposition of a new machine is very important to know the basic dynamic characteristics of whole system. These dynamic characteristics are solved via FEM (MSC.Marc/Mentat software in combination with SBRA (Simulation-Based Reliability Assessment Method (probabilistic Monte Carlo approach, Anthill and Python software. The proposed dimensions and springs of a new machine for fatigue testing of railway axles were used for manufacturing. Application of the SBRA method connected with FEM in these areas is a new and innovative trend in mechanics. This paper is continuation of former work (i.e. easier deterministic approach already presented in this journal in 2007.

  2. Rational Design for Rotaxane Synthesis through Intramolecular Slippage: Control of Activation Energy by Rigid Axle Length.

    Science.gov (United States)

    Masai, Hiroshi; Terao, Jun; Fujihara, Tetsuaki; Tsuji, Yasushi

    2016-05-01

    We describe a new concept for rotaxane synthesis through intramolecular slippage using π-conjugated molecules as rigid axles linked with organic soluble and flexible permethylated α-cyclodextrins (PM α-CDs) as macrocycles. Through hydrophilic-hydrophobic interactions and flipping of PM α-CDs, successful quantitative conversion into rotaxanes was achieved without covalent bond formation. The rotaxanes had high activation barrier for their de-threading, so that they were kinetically isolated and derivatized even under conditions unfavorable for maintaining the rotaxane structures. (1) H NMR spectroscopy experiments clearly revealed that the restricted motion of the linked macrocycle with the rigid axle made it possible to control the kinetic stability by adjusting the length of the rigid axle in the precursor structure rather than the steric bulkiness of the stopper unit.

  3. Hepatitis C Virus Driven AXL Expression Suppresses the Hepatic Type I Interferon Response.

    Directory of Open Access Journals (Sweden)

    Scott A Read

    Full Text Available Treatment of chronic hepatitis C virus (HCV infection is evolving rapidly with the development of novel direct acting antivirals (DAAs, however viral clearance remains intimately linked to the hepatic innate immune system. Patients demonstrating a high baseline activation of interferon stimulated genes (ISGs, termed interferon refractoriness, are less likely to mount a strong antiviral response and achieve viral clearance when placed on treatment. As a result, suppressor of cytokine signalling (SOCS 3 and other regulators of the IFN response have been identified as key candidates for the IFN refractory phenotype due to their regulatory role on the IFN response. AXL is a receptor tyrosine kinase that has been identified as a key regulator of interferon (IFN signalling in myeloid cells of the immune system, but has not been examined in the context of chronic HCV infection. Here, we show that AXL is up-regulated following HCV infection, both in vitro and in vivo and is likely induced by type I/III IFNs and inflammatory signalling pathways. AXL inhibited type IFNα mediated ISG expression resulting in a decrease in its antiviral efficacy against HCV in vitro. Furthermore, patients possessing the favourable IFNL3 rs12979860 genotype associated with treatment response, showed lower AXL expression in the liver and a stronger induction of AXL in the blood, following their first dose of IFN. Together, these data suggest that elevated AXL expression in the liver may mediate an IFN-refractory phenotype characteristic of patients possessing the unfavourable rs12979860 genotype, which is associated with lower rates of viral clearance.

  4. 基于轴荷平衡的双联轴货车钢板平衡悬架参数优化%Parameter Optimization of the Leaf-spring Balanced Suspension in a Tandem Axle Truck Based on Axle-load Balance

    Institute of Scientific and Technical Information of China (English)

    胡延平; 宋东奇; 陈一锴; 张卫华; 柏海舰

    2015-01-01

    [ Abstract] For thoroughly improving the overall driving performance of tandem-axle truck,a parameter optimiza-tion scheme for the leaf-spring balanced suspension of a tandem axle truck is proposed with consideration of dynamic axle load balance. Firstly a six DOF half-vehicle model with leaf-spring balanced suspension and a single-rut random excita-tion time-domain model are created respectively based on numerical analysis, and a corresponding dynamic vehicle-road coupled model is also built with MATLAB/Simulink accordingly. Then an overall driving performance indicator of tandem axle truck is put forward, which comprehensively reflect the dynamic axle load balance and ride comfort of vehicle and the degree of influence of suspension parameters on the overall driving performance of vehicle is explored based on orthog-onal experiment. Finally a thorough optimization of key suspension parameters is achieved by range analysis and variance analysis. The results indicate that compared with original truck, the overall driving performance indicator of truck after parameter optimization is enhanced by some 30% at the speed range of 20 to 90km/h.%为全面改善双联轴货车的综合行驶性能,提出一种考虑动态轴荷平衡的货车双联轴钢板平衡悬架参数优化方法。首先,基于数值分析法分别建立带钢板平衡悬架的6自由度1/2车辆模型和单轮辙随机激励时域模型,并在MATLAB/Simulink中构建相应的车路耦合动力学模型。进而提出综合反映动态轴荷平衡和平顺性的多联轴货车综合行驶性能指标,依据正交试验探索悬架各参数对车辆综合行驶性能的影响程度。最后通过极差和方差分析实现悬架关键参数的全面优化。结果表明,在20~90km/h车速下,相对于原货车,参数优化后货车的综合行驶性能指标约提高了30%。

  5. Axl signaling induces development of natural killer cells in vitro and in vivo.

    Science.gov (United States)

    Kim, Eun-Mi; Lee, Eun-Hee; Lee, Hwa-Yeon; Choi, Ha-Rim; Ji, Kon-Young; Kim, Su-Man; Kim, Kwang Dong; Kang, Hyung-Sik

    2017-03-01

    Natural killer (NK) cells have been well known to play a critical role in innate immunity, but they are also capable of regulating adaptive immunity through the induction of T cell-mediated memory response and B cell-mediated autoimmune response. NK cells are differentiated from hematopoietic stem cells (HSCs) in the bone marrow (BM), and a series of surface molecules are expressed on NK cells in a differentiation stage-specific manner. Axl receptor tyrosine kinase is originally identified as homeostatic regulators for antigen-presenting cells, and its ligand, growth-arrest-specific gene 6 (Gas6), has been reported to promote cell survival, proliferation, and migration, but their regulatory role in the development and effector function of NK cells is not yet fully understood. In this study, to investigate whether Axl is required for the regulation of NK cell development, the expression of mature NK (mNK) cell-specific receptors and NK cell-associated genes was analyzed in the differentiated HSCs-derived NK cells in vitro and the NK cells harvested from Axl(-/-) mice. We found that agonistic anti-Axl antibody or recombinant Gas6 specifically upregulated the expression of mNK cell-specific receptors, such as LY49A, Ly49G2, Ly49C/F/I, NKG2A/C/E (1.5- to 3.5-fold increase), and NK cell-associated genes, such as IL-2Rβ (2.3- or 2.4-fold increase), Perforin (4.1- or 2.1-fold increase), IL-15Rα (2.14- or 2.04-fold increase), and IFN-γ (3.3- or 2.8-fold increase) compared to each isotype control, whereas it was abrogated by treatment of Axl-Ig. Anti-Axl antibody or rGas6 also induced a 2.5- or 1.9-fold increase in the proliferation of developing NK cells compared to each control, respectively. mNK cell populations expressing mNK cell-specific receptors were reduced about twofold in NK cells differentiated from HSCs of Axl(-/-) mice compared with those of wild-type mice. Furthermore, the triggering of Axl signaling by agonistic anti-Axl antibody promoted the

  6. NM Gross Receipts July - December 2012

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  7. NM Gross Receipts January - June 2014

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  8. NM Gross Receipts January - June 2012

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  9. NM Gross Receipts January - June 2013

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  10. NM Gross Receipts January - June 2011

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  11. NM Gross Receipts July - December 2013

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  12. Happy Life Years: a measure of Gross National Happiness

    NARCIS (Netherlands)

    R. Veenhoven (Ruut)

    2004-01-01

    textabstractHappiness is defined as the degree to which a person enjoys his or her life-as-a-whole. Accordingly ‘Gross National Happiness’ is defined as the degree to which citizens in a country enjoy the life they live. Individual happiness can be measured by self-report on a single standard

  13. Application of Computational-Experimental Methods for Designing Optimized Semitrailer Axle Supports

    Directory of Open Access Journals (Sweden)

    David Valladares

    2015-01-01

    Full Text Available Computational and experimental methods were applied to the design and optimization of a semitrailer axle support subjected to fatigue loads. Numerical results based on the finite element method (FEM were correlated with extensometric tests to assess the accuracy of the computational method. This paper is focused on the “minimum radius manoeuvre.” This situation represents the highly critical load case occurring in a semitrailer operation where the tractor vehicle pulls the semitrailer's kingpin at approximately 90° with respect to its longitudinal axis, and high stress and strain phenomena take place in the axle supports’ structure. Loads and boundary conditions that correspond to this load case were first adjusted by means of experimental tests and could be later applied to each semitrailer axle support in the numerical model. In this analysis, the stress-strain elastic-plastic curves of the base material, the welding, and the HAZ have been incorporated to the numerical models. Fatigue S-N curves combined with the maximum Von Mises equivalent stresses obtained in the computational analysis provided a maximum number of cycles that the semitrailer axle support could reach in case of the minimum radius manoeuvre being applied to the vehicle in a repeated manner. The initial design could then be optimized to improve its fatigue life.

  14. AXL-Mediated Productive Infection of Human Endothelial Cells by Zika Virus.

    Science.gov (United States)

    Liu, Shufeng; DeLalio, Leon J; Isakson, Brant E; Wang, Tony T

    2016-11-11

    The mosquito-borne Zika virus (ZIKV) is now recognized as a blood-borne pathogen, raising an important question about how the virus gets into human bloodstream. The imminent threat of the ZIKV epidemic to the global blood supply also demands novel therapeutics to stop virus transmission though transfusion. We intend to characterize ZIKV tropism for human endothelial cells (ECs) and provide potential targets for intervention. We conducted immunostaining, plaque assay, and quantitative reverse transcription-polymerase chain reaction of ZIKV RNA to evaluate the possible infection of ECs by ZIKV. Both the African and the South American ZIKV strains readily infect human umbilical vein endothelial cells and human ECs derived from aortic and coronary artery, as well as the saphenous vein. Infected ECs released infectious progeny virus. Compared with the African strains, South American ZIKV isolates replicate faster in ECs and are partially cytopathic, suggesting enhanced virulence of these isolates. Flow cytometric analyses showed that the susceptibility of ECs positively correlated with the cell surface levels of tyrosine-protein kinase receptor UFO (AXL) receptor tyrosine kinase. Gain- and loss-of-function studies further revealed that AXL is required for ZIKV entry at a postbinding step. Finally, small-molecule inhibitors of the AXL kinase significantly reduced ZIKA infection of ECs. We identified EC as a key cell type for ZIKV infection. These data support the view of hematogenous dissemination of ZIKV and implicate AXL as a new target for antiviral therapy. © 2016 American Heart Association, Inc.

  15. Dynamics of two-axle railway freight wagons with UIC standard suspension

    DEFF Research Database (Denmark)

    Hoffmann, Mark; True, Hans

    2006-01-01

    The dynamics of two different two-axle railway freight wagons is investigated theoretically and compared. Fully nonlinear models are considered. The hysteresis from dry friction and the effect of impacts between elements of the suspension are included. Bifurcation diagrams are shown in order...

  16. Wheeled Vehicle Drive Lines, Axles, and Suspension Systems. Military Curriculum Materials for Vocational and Technical Education.

    Science.gov (United States)

    Army Ordnance Center and School, Aberdeen Proving Ground, MD.

    This course is one of several subcourses that make up the entire Army correspondence course on wheeled vehicle maintenance. The subcourse is designed to provide the student with information about the operation, malfunction diagnosis, maintenance, and repair of wheeled vehicle drive lines, axles, and suspension systems. It provides the basic…

  17. Influence of axle-wheel interface on ultrasonic testing of fatigue cracks in wheelset.

    Science.gov (United States)

    Makino, Kazunari; Biwa, Shiro

    2013-01-01

    For the ultrasonic testing at the wheel seat of railway axles, quantitative investigation of the reflection and transmission phenomena at the axle-wheel interface is important. This paper describes the influence of the axle-wheel interface on the ultrasonic testing of a fatigue crack in a wheelset by applying the spring interface model. The normal and tangential stiffnesses were identified experimentally for an as-manufactured wheelset at the normal incidence, and the reflection coefficient for the shear-wave oblique incidence was calculated. A parametric study was performed to clarify the influence of these interfacial stiffnesses on the incident-angle dependence of the reflection coefficient. The calculated reflection coefficient at the incident angle of 45° qualitatively explained the relative echo-height decrease due to the presence of a wheel observed experimentally for a wheelset in fatigue loading by rotating bending. The quantitative difference between the experimental and calculated results was considered to be due to the reduction of the effective interference of shrink fit by the wear at the axle-wheel interface during the fatigue loading as well as by the applied bending moment. For the estimated relative echo-height decrease to agree with the experimental results, the interfacial stiffnesses were found to be smaller than the values identified for the as-manufactured wheelset by a factor of 0.5-0.7.

  18. On Optimizing Steering Performance of Multi-axle Vehicle Based on Driving Force Control

    Directory of Open Access Journals (Sweden)

    Wu Zhicheng

    2017-01-01

    Full Text Available The steering performance of multi-axle vehicle with independent driving system is affected by the distribution of the wheel driving force. A nonlinear vehicle dynamics model including magic formula tire model for describing 11 DoF four-axle vehicle with dual-front-axle-steering (DFAS system was presented. The influence of different driving force distribution scheme on the steering performance of the vehicle was analyzed. A control strategy for improving the steady response and transient response of the vehicle steering is proposed. The results show: For the steady response, setting different drive force for internal and external wheels according to the actual steering characteristics of the vehicle can effectively improve its steering characteristics; For the transient response, adopting the zero sideslip angle control strategy and using the PID control algorithm to control the driving force of the outside wheel of tear-two-axle, under angle step input, the vehicle sideslip angle can quickly stabilize to 0 and yaw rate also significantly decreases.

  19. Gross anatomy of network security

    Science.gov (United States)

    Siu, Thomas J.

    2002-01-01

    Information security involves many branches of effort, including information assurance, host level security, physical security, and network security. Computer network security methods and implementations are given a top-down description to permit a medically focused audience to anchor this information to their daily practice. The depth of detail of network functionality and security measures, like that of the study of human anatomy, can be highly involved. Presented at the level of major gross anatomical systems, this paper will focus on network backbone implementation and perimeter defenses, then diagnostic tools, and finally the user practices (the human element). Physical security measures, though significant, have been defined as beyond the scope of this presentation.

  20. Happy Life Years: a measure of Gross National Happiness

    OpenAIRE

    Veenhoven, Ruut

    2004-01-01

    textabstractHappiness is defined as the degree to which a person enjoys his or her life-as-a-whole. Accordingly ‘Gross National Happiness’ is defined as the degree to which citizens in a country enjoy the life they live. Individual happiness can be measured by self-report on a single standard question. Hence Gross National Happiness can be measured by the average response to such questions in general populations surveys. Survey data on average self-report of happiness can be combined with est...

  1. Use of the soluble form of AXL in the diagnosis and/or prognosis of heart failure syndrome

    OpenAIRE

    Battle Perales, Montserrat; García de Frutos, Pablo

    2012-01-01

    [EN] The present invention refers to a method for diagnosing and/or prognosing a heart failure syndrome (HF), which comprises the step of measuring, in vitro, the amount of the soluble form of AXL (sAXL) in a test sample. The invention furthermore provides methods for deciding or recommending whether to initiate a medical regimen, as well as for determining the efficacy of said medical regimen. The invention also provides the use of sAXL as a marker for the diagnosis and/or prognosis of HF sA...

  2. Loss of the receptor tyrosine kinase Axl leads to enhanced inflammation in the CNS and delayed removal of myelin debris during Experimental Autoimmune Encephalomyelitis

    Directory of Open Access Journals (Sweden)

    Prieto Anne L

    2011-05-01

    Full Text Available Abstract Background Axl, together with Tyro3 and Mer, constitute the TAM family of receptor tyrosine kinases. In the nervous system, Axl and its ligand Growth-arrest-specific protein 6 (Gas6 are expressed on multiple cell types. Axl functions in dampening the immune response, regulating cytokine secretion, clearing apoptotic cells and debris, and maintaining cell survival. Axl is upregulated in various disease states, such as in the cuprizone toxicity-induced model of demyelination and in multiple sclerosis (MS lesions, suggesting that it plays a role in disease pathogenesis. To test for this, we studied the susceptibility of Axl-/- mice to experimental autoimmune encephalomyelitis (EAE, an animal model for multiple sclerosis. Methods WT and Axl-/- mice were immunized with myelin oligodendrocyte glycoprotein (MOG35-55 peptide emulsified in complete Freund's adjuvant and injected with pertussis toxin on day 0 and day 2. Mice were monitored daily for clinical signs of disease and analyzed for pathology during the acute phase of disease. Immunological responses were monitored by flow cytometry, cytokine analysis and proliferation assays. Results Axl-/- mice had a significantly more severe acute phase of EAE than WT mice. Axl-/- mice had more spinal cord lesions with larger inflammatory cuffs, more demyelination, and more axonal damage than WT mice during EAE. Strikingly, lesions in Axl-/- mice had more intense Oil-Red-O staining indicative of inefficient clearance of myelin debris. Fewer activated microglia/macrophages (Iba1+ were found in and/or surrounding lesions in Axl-/- mice relative to WT mice. In contrast, no significant differences were noted in immune cell responses between naïve and sensitized animals. Conclusions These data show that Axl alleviates EAE disease progression and suggests that in EAE Axl functions in the recruitment of microglia/macrophages and in the clearance of debris following demyelination. In addition, these data

  3. Nonlinearity-induced time-varying harmonic dynamic axle load and its impact on dynamic stability of car-trailer combinations

    Science.gov (United States)

    Zhang, Ning; Xiao, Hong; Winner, Hermann

    2016-06-01

    A nonlinearity-induced time-varying harmonic dynamic axle load is found in the road test of a car-trailer combination. To understand its influence on system dynamic stability, a corresponding linear single-track model (STM) is proposed. System dynamic stability is described and sensitivity analysis for the system parameters is achieved. The contribution of the harmonic force is quantified by a derived effective axle load. Because the harmonic effect might be time varying in practice, a time-frequency analysis-based parameter identification method is introduced. Experimental study shows that a time-varying harmonic effect really exists. A yaw-rate-based simulation method is designed to simulate this behaviour. The sensitivity analysis of the influence of the harmonic amplitude or phase on dynamic stability is performed with a simulation study. With appropriate modification of the harmonic amplitude and phase shift applied in selected time windows, the time-varying system characteristics in the road test can be simulated very well.

  4. Effect of GAS6 and AXL Gene Polymorphisms on Adiposity, Systemic Inflammation, and Insulin Resistance in Adolescents

    Directory of Open Access Journals (Sweden)

    Fone-Ching Hsiao

    2014-01-01

    Full Text Available The present study was designed to explore the effects of GAS6 and AXL gene polymorphisms on adiposity, systemic inflammation, and insulin resistance in adolescents. After multistage sampling from the data of the Taipei Children Heart Study-III, we collected 358 boys and 369 girls with an average age of 13.3 years. We genotyped the adolescents’ GAS6 rs8191973, GAS6 rs8191974, AXL rs4802113, and AXL rs2304232 polymorphisms. Significantly higher body mass index (BMI, waist circumference (WC, and hsCRP levels were found in boys with the GG genotype of GAS6 rs8191974 than A allele carriers; higher IL-6 and insulin levels and increased HOMA-IR were found in boys with the GG genotype of AXL rs2304232 than the A allele carriers. There was a significant difference in hsCRP levels of boys with the TT, TC, and CC genotypes of AXL rs4802113. Boys with both the GG genotype of GAS6 rs8191973 and the GG genotype of GAS6 rs8191974 exhibited higher BMI, WC, IL-6, and hsCRP levels than the boys carrying both the C allele of the GAS6 rs8191973 and the A allele of the GAS6 rs8191974. In conclusion, GAS6 and AXL polymorphisms are associated with adiposity, systemic inflammation, and insulin resistance in adolescents, especially in boys.

  5. Effect of Mn on hardenability of 25CrMo axle steel by an improved end-quench test

    Directory of Open Access Journals (Sweden)

    Zhang Yutuo

    2012-11-01

    Full Text Available With the sixth large-scale railway speed-up, the quality of the axles is essential to the safety of the locomotive. According to the high-speed axle technical standard for the control of alloy elements in axle steel, optimization experiments of 25CrMo steel composition were performed by vacuum inductive melting. In order to study the hardenability of high-speed rail axles, an improved end-quench test was put forward. The advantage is that it enables the heat to transfer along the axial direction, thus avoiding edge effects. The hardenability of 25CrMo axle steels with Mn content of 0.60wt.% and 0.80wt.% was investigated mainly by means of optical microscopy and hardness tests. The experimental results indicate that the Mn has a pronounced effect on the hardenability of the steel. With an increase in Mn content from 0.60wt.% and 0.80wt.%, the hardenability of 25CrMo axle steel increases and the hard microstructure is maintained at an increasing distance from the quenched end. From the surface of the water quenched end to the center of the sample, the microstructure is martensite, martensite with bainite, and bainite.

  6. Evaluation of gross radioactivity in foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Zorer, Oezlem Selcuk; Oeter, Cigdem [Yuzuncu Yil Univ., Van (Turkey). Dept. of Chemistry

    2015-05-15

    The paper presents the results of radiological investigations of food products sampled in the summer and fall of 2011 and 2012 in different parts of Van, Turkey. Gross radioactivity measurements in food products were evaluated. Food items were divided into eight groups: (1) water, (2) fish, (3) cheese products, (4) fruits, (5) vegetables, (6) herbs, (7) walnut and (8) rock salt. The levels of the gross alpha and gross beta radioactivity in all food samples varied widely ranging from 0.070 to 10.885 Bq/g and from 0.132 to 48.285 Bq/g on dry mass basis, respectively. In one sample, gross alpha and gross beta activity concentrations were found to be relatively high according to the other samples and in all samples, the gross alpha radioactivity was measured lower than the gross beta radioactivity. The gross α and gross β activities were measured by using α/β counter of the multi-detector low background system (PIC MPC-9604).

  7. OPTIMAL KINEMATIC DESIGN OF A CAR AXLE GUIDING MECHANISM IN MBS SOFTWARE ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Cătălin ALEXANDRU

    2015-05-01

    Full Text Available This work deals with the optimal kinematic design of the guiding mechanism used for the rear axle of a motor vehicle. A guiding mechanism of type 2S1C (S - sphere, C - circle is taken into consideration, the optimization study being conducted by using the multi-body systems (MBS software environment ADAMS of MSC. The global cartesian coordinates of some design points (the locations of the joints between the guiding arms and car body are used as independent design variables for the optimization study. The main design objectives refer to the longitudinal displacement of the axle and its proper rotation (around the transversal axis, the kinematic optimization goal being to minimize these variations.

  8. IMPACT OF CARBURIZING AND BOROSILICONIZING ON VIBROACCELERATION OF BEVEL GEAR FRONT DRIVE AXLE SKIDDERS DURING OPERATION

    Directory of Open Access Journals (Sweden)

    M. N. Pischov

    2015-01-01

    Full Text Available It is now established that the main causes of failure of the transmission parts of the forest machines is wear of their working surfaces. The destruction of the contact surfaces of bevel gears front axle of skidder TTP-401 during its operation is usually connected, with the formation of plastic deformation on the teeth. According to modern concepts of the theory of the destruction of the details revealed that after the formation of plastic deformations leads to microcracks, the development of micro tracks depends on the magnitude and sign of residual stresses. This article presents dependance graphs of vibration acceleration bevel gears front axle skidder subiect to the method of hardening.

  9. Optimization of Assembly of Rear Axle Carrier (Transmission System Through Ergonomic Consideration: An Overview

    Directory of Open Access Journals (Sweden)

    Mr. Kaustubh N. Kalaspurkar

    2013-05-01

    Full Text Available Increased competition in the market, ever increasing demands of products and delivery of the quality product within committed dates forcing the manufacturers to involve newer and more optimized techniques in their production scheduling. This technique either involves costly Automation and Flexible Manufacturing System (FMS or the techniques forcing on elimination of unnecessary and unproductive operation (i.e. motion during the production. An assembly line is designed by determining the sequences of operations for manufacture of each component as well as the final product. In this paper, a case study at one of leading tractor manufacturing company in India for one of its production operation i.e. assembly of Rear Axle Carrier (Transmission System of tractor is presented using the technique of time and motion study. For this technique such as Predetermined Motion Time Study (PMTS, Method Time Measurement (MTM, various process charts are used for analysis and optimize their present methodology of assembling Rear Axle Carrier (RAC.

  10. On the vertical interaction between a three-axle bogie and track

    Directory of Open Access Journals (Sweden)

    Mazilu Traian

    2017-01-01

    Full Text Available In this paper, the ‘moving wheel’ model is used aiming to analysis new aspects of the interaction between three-axle bogie and track due to the harmonic roughness of the rail. The three-axle bogie of a locomotive is considered and its model is reduced to three loaded wheels running along a rail supported on a continuous elastic foundation. The track model consists of a Euler-Bernoulli beam resting on elastic foundation including two elastic layers (Winkler model representing the rail pad and ballast and one inertial layer for sleepers. The rail deflection due to the moving dead loads of the wheels is calculated and the frequency response functions of the wheels, rail in the contact points and contact forces are analysed, including the three resonance frequencies.

  11. FLEXIBLE 2-DOF STEERING MODEL OF MULTI-AXLE HEAVY-DUTY VEHICLE

    Institute of Scientific and Technical Information of China (English)

    Yang Bo; Wang Xuelin; Hu Yujin; Li Chenggang

    2004-01-01

    A flexible two degrees of freedom (2-DOF) steering model of multi-axle vehicle (MAV) is presented with considering the effect of frame flexibility based on the classic 2-DOF model. A method to calculate the frame flexibility is derived by using three moments equation. The steering stability of MAV is analyzed. The steering performance of MAV is also researched in frequency domain. Simulation results show that the dynamic effects of flexible model are more severe than rigid model and the flexible effect of frame will weaken the steering stability of MAV. Different disposals of steering axles lead to different steering characteristics of MAV. The in-phase steering mode improves the steering characteristics and stability at high speed. The anti-phase steering mode increases the steering mobility at low vehicle speed.

  12. A layered cooling process in whole quenching process for lightweight front axle beam

    Directory of Open Access Journals (Sweden)

    Gao Kai

    2015-01-01

    Full Text Available In order to improve the uniformity of martensite distribution and obtain consistent mechanical performance during the quenching process of front axle beam, a layered cooling process was presented in this paper. The fluid-solid coupled temperature field were investigated by finite element modeling and the prediction of micro-structure and hardness distributions were also carried out. The experimental result verifies the reliability of this model.

  13. The dynamics of European two-axle railway freight wagons with UIC standard suspension

    DEFF Research Database (Denmark)

    Hoffmann, Mark; True, Hans

    2008-01-01

    The dynamics of two-axle railway freight wagons with the UIC standard Suspension is investigated theoretically and the dynamic behaviour is explained. Fully nonlinear models are considered. The hysteresis from dry friction and the effect of impacts between elements of the suspension are included....... Different wheel-rail geometries are investigated and the results commented. Bifurcation diagrams ale used to describe the eigen-dynamics of the wagons....

  14. Simulation Research on Stress Intensity Factors of Different Crack Aspect Ratios on Hollow Axles

    Institute of Scientific and Technical Information of China (English)

    ZHOU Suxia; XIE Jilong

    2009-01-01

    Because of the wicked service environment of the high speed train, it is possible that the hollow axle of the train may encounter the foreign object damage and form a sharp notch. Under the fatigue loading a crack can initiate from the notch and propagate to failure. It is noted that the stress intensity factor is the control parameter of the crack propagating, for the purpose of getting the more exact propagation characteristics, the stress intensity factor is studied mainly. The service loads of hollow axles are defined, and the stress distribution of hollow axles is obtained according to the load spectrum. The semi-ellipse crack configuration is defined with three parameters:the aspect ratio, the relative depth and the relative location along the crack front. Quarter point 20-node isoparametric degenerate singular elements are used for the region near the crack tip. The finite element model of crack extension of hollow axle is created, and the crack front is dispersed which can realize orthogonal extension. Based on this the stress intensity factors of crack front were calculated, and the distribution rules of the stress intensity factors of different initial crack shapes are obtained. The conclusions are compared with that of the analytic method and they agree with each other very well, and the calculating results show that there is a close relationship between the stress intensity factor and the initial crack shape. For a round crack the stress intensity factor at the surface point increases faster than the one at the center point with the crack propagation. However, for a narrow crack, the results are in contrast with that of a round one. So, all the cracks with different shapes propagate toward to a similar shape, and they grow at this shape to end. The study may contribute to the crack propagate characteristics research.

  15. Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of "vaulted profile", heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...

  16. DEVELOPMENT OF AN ARMY STATIONARY AXLE TEST STAND FOR LUBRICANT EFFICIENCY EVALUATION-PART II

    Science.gov (United States)

    2017-01-13

    product endorsement purposes. Contracted Author As the author(s) is(are) not a Government employee (s), this document was only reviewed for...work using the stationary axle efficiency test stand was completed using hardware representative of light and medium duty tactical wheeled vehicles...sufficient motoring and absorption capabilities required to test a wide range of light to heavy duty driveline hardware representative of those fielded by

  17. Measures of Gross National Happiness

    Directory of Open Access Journals (Sweden)

    Ruut Veenhoven

    2010-02-01

    Full Text Available Happiness is rising on the political agenda and this calls for measures of how well nations perform in creating great happiness for a great number, analogous to measures of success in creating wealth, such as GDP. Happiness is defined as subjective enjoyment of one’s life as-a-whole and this can be measured using self-reports. Question on happiness are currently used in large scale surveys of the general population in nations. As a result we have now comparable data on happiness in 144 contemporary nations and time-series of 25 years and longer on 11 developed nations. These data can be aggregated in different ways: If the aim is simply greater happiness for a greater number of citizens, Average happiness (AH is an appropriate measure. If the focus is on enduring happiness, it is better to combine average happiness with longevity in an index of Happy Life Years (HLY. If the aim is to reduce disparity among citizens a relevant indicator is the Inequality of Happiness (IH in the nations as measured with the standard deviation. Average and dispersion can also be combined in an index of Inequality-Adjusted Happiness (IAH. Comparison across nations shows sizable differences on all these measures of gross national happiness and these differences correspond with societal characteristics that can be influenced by policy makers, such as freedom and justice. Comparison over time shows major improvement during the last decade.

  18. A Flexible Arrayed Eddy Current Sensor for Inspection of Hollow Axle Inner Surfaces

    Directory of Open Access Journals (Sweden)

    Zhenguo Sun

    2016-06-01

    Full Text Available A reliable and accurate inspection of the hollow axle inner surface is important for the safe operation of high-speed trains. In order to improve the reliability of the inspection, a flexible arrayed eddy current sensor for non-destructive testing of the hollow axle inner surface was designed, fabricated and characterized. The sensor, consisting of two excitation traces and 28 sensing traces, was developed by using the flexible printed circuit board (FPCB technique to conform the geometric features of the inner surfaces of the hollow axles. The main innovative aspect of the sensor was the new arrangement of excitation/sensing traces to achieve a differential configuration. Finite element model was established to analyze sensor responses and to determine the optimal excitation frequency. Experimental validations were conducted on a specimen with several artificial defects. Results from experiments and simulations were consistent with each other, with the maximum relative error less than 4%. Both results proved that the sensor was capable of detecting longitudinal and transverse defects with the depth of 0.5 mm under the optimal excitation frequency of 0.9 MHz.

  19. The Mechanics of Gross Moist Stability

    Directory of Open Access Journals (Sweden)

    Zeljka Fuchs

    2009-08-01

    Full Text Available The gross moist stability relates the net lateral outflow of moist entropy or moist static energy from an atmospheric convective region to some measure of the strength of the convection in that region. If the gross moist stability can be predicted as a function of the local environmental conditions, then it becomes the key element in understanding how convection is controlled by the large-scale flow. This paper provides a guide to the various ways in which the gross moist stability is defined and the subtleties of its calculation from observations and models. Various theories for the determination of the gross moist stability are presented and its roles in current conceptual models for the tropical atmospheric circulation are analyzed. The possible effect of negative gross moist stability on the development and dynamics of tropical disturbances is currently of great interest.

  20. Gross and Microscopic Lesions in Corals from Micronesia.

    Science.gov (United States)

    Work, T M; Aeby, G S; Hughen, K A

    2016-01-01

    The authors documented gross and microscopic morphology of lesions in corals on 7 islands spanning western, southern, and eastern Micronesia, sampling 76 colonies comprising 30 species of corals among 18 genera, with Acropora, Porites, and Montipora dominating. Tissue loss comprised the majority of gross lesions sampled (41%), followed by discoloration (30%) and growth anomaly (29%). Of 31 cases of tissue loss, most lesions were subacute (48%), followed by acute and chronic (26% each). Of 23 samples with discoloration, most were dark discoloration (40%), with bleaching and other discoloration each constituting 30%. Of 22 growth anomalies, umbonate growth anomalies composed half, with exophytic, nodular, and rugose growth anomalies composing the remainder. On histopathology, for 9 cases of dark discoloration, fungal infections predominated (77%); for 7 bleached corals, depletion of zooxanthellae from the gastrodermis made up a majority of microscopic diagnoses (57%); and for growth anomalies other than umbonate, hyperplasia of the basal body wall was the most common microscopic finding (63%). For the remainder of the gross lesions, no single microscopic finding constituted >50% of the total. Host response varied with the agent present on histology. Fragmentation of tissues was most often associated with algae (60%), whereas necrosis dominated (53%) for fungi. Two newly documented potentially symbiotic tissue-associated metazoans were seen in Porites and Montipora. Findings of multiple potential etiologies for a given gross lesion highlight the importance of incorporating histopathology in coral disease surveys. This study also expands the range of corals infected with cell-associated microbial aggregates.

  1. Gross and microscopic lesions in corals from Micronesia

    Science.gov (United States)

    Work, Thierry M.; Aeby, Greta S.; Hughen, Konrad A.

    2015-01-01

    The authors documented gross and microscopic morphology of lesions in corals on 7 islands spanning western, southern, and eastern Micronesia, sampling 76 colonies comprising 30 species of corals among 18 genera, with Acropora, Porites, and Montipora dominating. Tissue loss comprised the majority of gross lesions sampled (41%), followed by discoloration (30%) and growth anomaly (29%). Of 31 cases of tissue loss, most lesions were subacute (48%), followed by acute and chronic (26% each). Of 23 samples with discoloration, most were dark discoloration (40%), with bleaching and other discoloration each constituting 30%. Of 22 growth anomalies, umbonate growth anomalies composed half, with exophytic, nodular, and rugose growth anomalies composing the remainder. On histopathology, for 9 cases of dark discoloration, fungal infections predominated (77%); for 7 bleached corals, depletion of zooxanthellae from the gastrodermis made up a majority of microscopic diagnoses (57%); and for growth anomalies other than umbonate, hyperplasia of the basal body wall was the most common microscopic finding (63%). For the remainder of the gross lesions, no single microscopic finding constituted >50% of the total. Host response varied with the agent present on histology. Fragmentation of tissues was most often associated with algae (60%), whereas necrosis dominated (53%) for fungi. Two newly documented potentially symbiotic tissue-associated metazoans were seen in Porites and Montipora. Findings of multiple potential etiologies for a given gross lesion highlight the importance of incorporating histopathology in coral disease surveys. This study also expands the range of corals infected with cell-associated microbial aggregates.

  2. Samuel D. Gross: the nestor of American surgery.

    Science.gov (United States)

    Toledo-Pereyra, Luis H

    2006-01-01

    Samuel David Gross (1805-1884) represented the most notable surgeon of his generation and was honored with the title of "The Nestor of American Surgeon" by surgeon biographer Isaac Minis Hays. Of Pennsylvania Dutch stock, he was born on the family farm near Easton, Pennsylvania. He attended Wilkebarré Academy and Lawrenceville High School, noted private institutions of the day. He apprenticed under Doctor Joseph K. Swift of Easton and later with Professor George McClellan while in Philadelphia. In 1828, he graduated from Jefferson Medical College and remained for a short time in Philadelphia. Professor Gross focused his professional pursuits in the cities of Easton (1830-1833), Cincinnati (1833-1840), Louisville (1840-1856), and Philadelphia (1856-1882). He retired from Jefferson Medical College two years before his death in 1884. Samuel D. Gross' contributions to surgery were numerous and diverse. He was recognized as a prolific author of classic texts of pathology, surgery, and history, an educator, a leader, a surgical researcher, and a pioneer surgeon practitioner. His influence in national affairs was immense, and his recognition as a respected surgeon was unmatched. He remains the most distinguished surgeon of his times. History values him as a hard working, honest, highly competent, and committed individual. His capacity for work and his dedication to a single cause were unrivaled. Doctor Gross integrated the best that surgery could give to future generations of surgical professionals.

  3. [Role of 18FDG-PET/CT in the management and gross tumor volume definition for radiotherapy of head and neck cancer; single institution experiences based on long-term follow-up].

    Science.gov (United States)

    Hideghéty, Katalin; Cserháti, Adrienne; Besenyi, Zsuzsanna; Zag, Levente; Gaál, Szilvia; Együd, Zsófia; Mózes, Petra; Szántó, Erika; Csenki, Melinda; Rusz, Orsolya; Varga, Zoltán; Dobi, Ágnes; Maráz, Anikó; Pávics, László; Lengyel, Zsolt

    2015-06-01

    The purpose of our work is evaluation of the impact of 18FDG-PET/CT on the complex management of locoregionally advanced (T3-4N1-3) head and neck squamous cell cancer (LAHNSC), and on the target definition for 3D conformal (3DCRT) and intensity-modulated radiotherapy (IMRT). 18FDG-PET/CT were performed on 185 patients with LAHNSC prior to radiotherapy/chemoradiation in the treatment position between 2006 and 2011. Prior to it 91 patients received induction chemotherapy (in 20 cases of these, baseline PET/CT was also available). The independently delineated CT-based gross tumor volume (GTVct) and PET/CT based ones (GTVpet) were compared. Impact of PET/CT on the treatment strategy, on tumor response evaluation to ICT, on GTV definition furthermore on overall and disease-specific survival (OS, DSS) was analysed. PET/CT revealed 10 head and neck, 2 lung cancers for 15 patients with carcinoma of unknown primary (CUP) while 3 remained unknown. Second tumors were detected in 8 (4.4%), distant metastasis in 15 (8.2%) cases. The difference between GTVct and GTVpet was significant (p=0.001). In 16 patients (14%) the GTVpet were larger than GTVct due to multifocal manifestations in the laryngo-pharyngeal regions (4 cases) or lymph node metastases (12 cases). In the majority of the cases (82 pts, 72%) PET/CT-based conturing resulted in remarkable decrease in the volume (15-20%: 4 cases, 20-50%: 46 cases, >50%: 32 cases). On the basis of the initial and post-ICT PET/CT comparison in 15/20 patients more than 50% volume reduction and in 6/20 cases complete response were achieved. After an average of 6.4 years of follow-up the OS (median: 18.3±2.6 months) and DSS (median: 25.0±4.0 months) exhibited close correlation (p=0.0001) to the GTVpet. In cases with GTVpet 40 cm3 the median DSS was 8.4±0.96 months (HR= 11.48; 95% CI: 5.3-24.9). Our results suggest that 18FDG-PET/CT plays an important role for patient with LAHNSC, by modifying the treatment concept and improving the target

  4. Dethreading of a Photoactive Azobenzene-Containing Molecular Axle from a Crown Ether Ring: A Computational Investigation.

    Science.gov (United States)

    Tabacchi, Gloria; Silvi, Serena; Venturi, Margherita; Credi, Alberto; Fois, Ettore

    2016-06-17

    Pseudorotaxanes formed by a dibenzo[24]crown-8 ring (R) and a dialkylammonium axle bearing either two E- or two Z-azobenzene units (EE-A or ZZ-A) revealed useful for the construction of light-powered molecular machines and motors, as they provide the opportunity of photocontrolling self-assembly/disassembly processes. The potential energies profiles for the dethreading of these complexes have been investigated by adopting a combination of first-principles molecular dynamics, metadynamics and quantum-chemical geometry optimization approaches. While the dethreading of the EE-A axle is associated with a monotonic energy increase, for that of the ZZ-A axle a transition state and an intermediate structure, in which the components are still threaded together, are found. The rate determining step for the dethreading of the ZZ axle has a higher energy barrier than that of the EE axle, in agreement with the experimental kinetic data. Moreover, the results suggest that the elliptic shape of the ring cavity is important for discriminating between the E and Z terminal azobenzene during dethreading.

  5. 200 km/h 八轴客运电力机车轴重转移分析%Axle - load Transfer Analysis of 200 km/h Eight - axle Passenger Electric Locomotive

    Institute of Scientific and Technical Information of China (English)

    吕凯凯; 王开云; 张志和

    2015-01-01

    An axle - load transfer model for a new 200 km/ h eight - axle passenger electric locomotive is established in this paper. Comparisons between calculation results obtained from the established model and that from the commercial dynamic software under the quasi - static condition are made. Some factors that affect the locomotive axle - load transfer are analyzed. The result shows that the axle - load of the first axle and second axle are reducing,while for the third axle and fourth axle they are increasing. The maxi-mum load - increasing ratio is happened to the fourth axle,which is 6. 28 percent,and the maximum load- reducing ratio is for the first axle,which is also 6. 28 percent. The calculation result is similar to that by using the commercial dynamic software where the difference is only about 0. 8 percent. Compared with the traction motor suspended on wheel - set,the traction motor suspended on frame could reduce the axle- load transfer by about 5. 77 percent. The optimal traction height for the 200 km/ h eight - axle passen-ger electric locomotive is 260 mm. Reducing the distance between motor front and rear suspension points can improve the adhesion weight usage of a locomotive.%针对一种新型的200 km/ h 八轴客运电力机车,建立了轴重转移计算模型。利用该模型计算其轴重转移,与动力学软件在准静态条件下的仿真结果进行对比,并分析影响机车轴重转移的因素。研究表明,该机车第一、二轴为减载,第三、四轴为增载,且第四轴增载最大,增载6.28%,第一轴减载最大,减载6.28%;模型计算结果与动力学软件仿真结果相差0.8%;机车牵引电机采用架悬方式能有效减小机车轴重转移,相比电机采用轴悬方式,机车轴重转移减小5.77%;该机车最优牵引点高度为260 mm;减小电机前后悬挂点之间的纵向跨距能有效提高机车黏着重量利用率。

  6. The future of gross anatomy teaching.

    Science.gov (United States)

    Malamed, S; Seiden, D

    1995-01-01

    A survey of U.S. departments of anatomy, physiology, and biochemistry shows that 39% of the respondent anatomy departments reported declines in the numbers of graduate students taking the human gross anatomy course. Similarly, 42% of the departments reported decreases in the numbers of graduate students teaching human gross anatomy. These decreases were greater in anatomy than in physiology and in biochemistry. The percentages of departments reporting increases in students taking or teaching their courses was 6% for human gross anatomy and 0% to 19% for physiology and biochemistry courses. To reverse this trend the establishment of specific programs for the training of gross anatomy teachers is advocated. These new teachers will be available as the need for them is increasingly recognized in the future.

  7. FUZZY ECCENTRICITY AND GROSS ERROR IDENTIFICATION

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The dominant and recessive effect made by exceptional interferer is analyzed in measurement system based on responsive character, and the gross error model of fuzzy clustering based on fuzzy relation and fuzzy equipollence relation is built. The concept and calculate formula of fuzzy eccentricity are defined to deduce the evaluation rule and function of gross error, on the base of them, a fuzzy clustering method of separating and discriminating the gross error is found. Utilized in the dynamic circular division measurement system, the method can identify and eliminate gross error in measured data, and reduce measured data dispersity. Experimental results indicate that the use of the method and model enables repetitive precision of the system to improve 80% higher than the foregoing system, to reach 3.5 s, and angle measurement error is less than 7 s.

  8. Validating the Rett Syndrome Gross Motor Scale

    DEFF Research Database (Denmark)

    Downs, Jenny; Stahlhut, Michelle; Wong, Kingsley;

    2016-01-01

    Rett syndrome is a pervasive neurodevelopmental disorder associated with a pathogenic mutation on the MECP2 gene. Impaired movement is a fundamental component and the Rett Syndrome Gross Motor Scale was developed to measure gross motor abilities in this population. The current study investigated...... the validity and reliability of the Rett Syndrome Gross Motor Scale. Video data showing gross motor abilities supplemented with parent report data was collected for 255 girls and women registered with the Australian Rett Syndrome Database, and the factor structure and relationships between motor scores, age...... and genotype were investigated. Clinical assessment scores for 38 girls and women with Rett syndrome who attended the Danish Center for Rett Syndrome were used to assess consistency of measurement. Principal components analysis enabled the calculation of three factor scores: Sitting, Standing and Walking...

  9. Stress Analysis and Fatigue Analysis of Front Axle of Heavy-Duty Truck using ANSYS Ncode Design Life for Different Loading Cases

    Directory of Open Access Journals (Sweden)

    Hemant L. Aghav

    2016-06-01

    Full Text Available Front axle of heavy duty truck is the important component of vehicle and needs good design under the various loading conditions of the complete vehicle. Aim of the project is to stress analysis and predict the life of front axle for vertical, and vertical and braking loading case. The fatigue life of front axle is generally estimated by stress life approach and strain life approach method. Front axle beam assembly was modeled in the NX cad software. Meshing and Stress analysis is performed by ANSYS workbench and fatigue analysis is performed by NCODE design life ANSYS tool under different loading cases. Fatigue life of axle obtained by FEA method is more than 2 x 105 cycles, which is considered as safe for vertical loading case. Similarly, Fatigue life of axle obtained is more than 4 x 103 cycles, which is considered as safe for vertical and braking loading case. The max stress region is below spring pad of axle for vertical loading and in the goose neck of axle for vertical and braking loading case

  10. Acute lymphoblastic leukemia presenting with gross hematuria

    OpenAIRE

    Kalbani, Naifain Al; Weitzman, Sheila; Abdelhaleem, Mohamed; Carcao, Manuel; Abla, Oussama

    2007-01-01

    A case of a six-year-old boy presenting with gross hematuria is reported. Investigations revealed the etiology of the hematuria to be thrombocytopenia in the setting of newly diagnosed acute lymphoblastic leukemia. The diagnosis of leukemia was confirmed by bone marrow examination. The patient’s hematuria completely resolved with platelet transfusions. Although thrombocytopenia is a very common presenting feature of acute lymphoblastic leukemia, gross hematuria is exceedingly rare. Thus, thro...

  11. Validating the Rett Syndrome Gross Motor Scale.

    Science.gov (United States)

    Downs, Jenny; Stahlhut, Michelle; Wong, Kingsley; Syhler, Birgit; Bisgaard, Anne-Marie; Jacoby, Peter; Leonard, Helen

    2016-01-01

    Rett syndrome is a pervasive neurodevelopmental disorder associated with a pathogenic mutation on the MECP2 gene. Impaired movement is a fundamental component and the Rett Syndrome Gross Motor Scale was developed to measure gross motor abilities in this population. The current study investigated the validity and reliability of the Rett Syndrome Gross Motor Scale. Video data showing gross motor abilities supplemented with parent report data was collected for 255 girls and women registered with the Australian Rett Syndrome Database, and the factor structure and relationships between motor scores, age and genotype were investigated. Clinical assessment scores for 38 girls and women with Rett syndrome who attended the Danish Center for Rett Syndrome were used to assess consistency of measurement. Principal components analysis enabled the calculation of three factor scores: Sitting, Standing and Walking, and Challenge. Motor scores were poorer with increasing age and those with the p.Arg133Cys, p.Arg294* or p.Arg306Cys mutation achieved higher scores than those with a large deletion. The repeatability of clinical assessment was excellent (intraclass correlation coefficient for total score 0.99, 95% CI 0.93-0.98). The standard error of measurement for the total score was 2 points and we would be 95% confident that a change 4 points in the 45-point scale would be greater than within-subject measurement error. The Rett Syndrome Gross Motor Scale could be an appropriate measure of gross motor skills in clinical practice and clinical trials.

  12. Product Design and Production Practice of 700MPa High Strength Hot Rolled Strip for Auto Axle Tube

    Science.gov (United States)

    Hui, Pan; Zhao-dong, Wang; Ya-jun, Hui; Yang, Cui; Xiang-tao, Deng; Chun-lin, Bao

    According to the technical specifications of 700MPa high strength automotive axle tube steel, a low cost of 0.07%C+1.5%Mn+0.05%Nb+0.10%Ti was designed. The high strength mainly relies on grain refinement strengthening and precipitation strengthening. The recrystallization, precipitation, and CCT curves of the 700MPa grade axle tube steel were studied in order to determine a reasonable TMCP process. By controlling the low level segregation band, low level of C and N content, 700MPa grade high strength automotive axle tube steel is successfully developed with excellent mechanical property, welding property, flattening and flaring property, torsion fatigue property, static torsional property and surface quality.

  13. NEW TECHNOLOGY AND MACHINE TOOL FOR THE FORMING OF THE REAR AXLE SHAFT OF LIGHT TRUCK

    Institute of Scientific and Technical Information of China (English)

    Han Yingchun; Yu Duonian; Wang Xueming

    2004-01-01

    A new technology of forward extrusion and cross rolling has been developed to process the rear axle shaft sleeve of light truck with the use of tube billets. This technology is characterized by large reductions of material, energy and cost of production and has significant economical benefits. This technology is stable and reliable. The three rolls transverse rolling mill built based on this technology has novelty construction, higher production efficiency, non-vibration and noise. The research results have been extensively applied to light trucks and farm transport with load of 1 to 3 tones.

  14. Performance of Single Axle Tractors in the Semi-Arid Central Part of ...

    African Journals Online (AJOL)

    user1

    1Department of Agricultural Engineering Research, Ethiopian Institute of ... tractor but least for Vari tractor which consumed much higher fuel per unit area than the two ... operation. Furthermore they are born and reared in the village system ... food supply for expanding world population tractor is the prime source of power in.

  15. Analysis of historical gross gamma logging data from BY tank farm

    Energy Technology Data Exchange (ETDEWEB)

    MYERS, D.A.

    1999-10-13

    Gross gamma ray logs, recorded from January 1975 through mid-year 1994 as part of the Single-Shell Tank Farm Dry Well Surveillance Program, have been reanalyzed for the BY tank farm to locate the presence of mobile radionuclides in the subsurface. This report presents the BY tank farm gross gamma ray data in such a way as to assist others in their study of vadose zone mechanisms.

  16. Intelligent Energy Management Strategy for a Separated-Axle Parallel Hybrid Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Naser Fallahi

    2014-03-01

    Full Text Available Hybrid electric vehicles (HEV in addition to provide the benefits of electric vehicles could satisfy consumers for some performances of conventional internal combustion engine (ICE vehicles such as acceleration and long range. On this way, suitable energy optimization strategies should be employed to get desired efficiency, less fuel consumption and pollution. One of the favorite and simple configurations of HEVs is parallel type. A student team at University of Kashan, IRAN have designed and manufactured Shaheb 2 hybrid electric vehicle. It is a separated-axle (or Through-to-Road (TTR parallel HEV type based on Pride platform. Employed energy management in Shaheb 2 is on/off strategy and three modes; motor, engine and hybrid have been implemented. This paper investigates the modeling of separated-axle (or TTR parallel type of HEV in ADVISOR software and then evaluates two control strategies for Shaheb 2; on/off strategy and an intelligent control based on fuzzy logic. On this way, maximizing the engine is considered as objective function. The simulation results indicate that the fuzzy strategy leads to less fuel consumption and lower pollution for given UDDS driving cycle rather than on/off strategy for Shaheb 2.

  17. POD curves for non-maximizable ultrasonic responses: Statistical derivation and application to solid freight axles

    Science.gov (United States)

    Carboni, Michele; Cantini, Stefano

    2016-02-01

    The most relevant standards on ultrasonic testing, and an effective inspection practice, require the maximization of echo responses due to indications before their evaluation in terms of amplitude and size. This is achieved effectively pointing the acoustic axis of the sound beam to the indication, in a way to get back the maximum possible sound energy. Considering some operative cases, however, such a response maximization is not always feasible, mainly due to geometrical constraints impeding the inspection of the whole control area with a constant sensitivity. The traditional end inspection of solid railway axles by a rotating probe mounting conventional sensors falls back into this kind of inspections. In particular, inspection angles are fixed and the probe holder cannot move along the axle allowing response maximization of in-service damages located, for example, along the cylindrical body. It follows some control areas cannot be inspected using the maximum sound pressure. The present research shows how the derivation of "Probability of Detection" curves for non-maximizable ultrasonic responses cannot be carried out by the traditional statistical approach and a novel one, of the "Model-Assisted Probability of Detection" kind, is consequently proposed based on experiments and numerical simulations.

  18. Stiffness determination of the controlled wheel module of a two-axle vehicle

    Directory of Open Access Journals (Sweden)

    Belevtseva N.V.

    2016-08-01

    Full Text Available The conditions of a secure loss of stability of a two-axle wheel vehicle with absolutely hard steering have been found before. The analytically derived conditions of a secure stability loss in case of torsional stiffness are dependent on the relationship between the slipping resistance coefficients, the transverse clutch coefficients on the axes, and the torsional stiffness of the controlled wheel module. In this case, the trail distance is taken into account in the wheel module control system, the mass of the module being neglected. The approach suggested in the paper does take into account the mass of the controlled wheel module. The slipping forces are presented accurate to a cubic term of expansion in slipping angles. The torsional stiffness intervals have been found that provide a secure loss of stability of a two-axle wheel vehicle model. The intervals have been obtained on the basis of a bifurcation analysis of actual bifurcations of the stationary states in the vicinity of the rectilinear motion of the model. Diagrams that illustrate the fulfillment of secure stability loss conditions and allow using the results obtained in designing a wheel module are presented in the paper. The technique used is alternative to the well-known M. Bautin’s approach to determination of secure-insecure conditions in case of a divergent loss of stability.

  19. Concurrent Validity of Preschooler Gross Motor Quality Scale with Test of Gross Motor Development-2

    Science.gov (United States)

    Sun, Shih-Heng; Sun, Hsiao-Ling; Zhu, Yi-Ching; Huang, Li-chi; Hsieh, Yueh-Ling

    2011-01-01

    Preschooler Gross Motor Quality Scale (PGMQ) was recently developed to evaluate motor skill quality of preschoolers. The purpose of this study was to establish the concurrent validity of PGMQ using Test of Gross Motor Development-2 (TGMD-2) as the gold standard. One hundred and thirty five preschool children aged from three to six years were…

  20. BOREAS HYD-8 Gross Precipitation Data

    Science.gov (United States)

    Fernandes, Richard; Hall, Forrest G. (Editor); Knapp, David E. (Editor); Smith, David E. (Technical Monitor)

    2000-01-01

    The Boreal Ecosystem-Atmosphere Study (BOREAS) Hydrology (HYD)-08 team made measurements of surface hydrological processes at the Southern Study Area-Old Black Spruce (SSA-OBS) Tower Flux site to support its research into point hydrological processes and the spatial variation of these processes. Data collected may be useful in characterizing canopy interception, drip, throughfall, moss interception, drainage, evaporation, and capacity during the growing season at daily temporal resolution. This particular data set contains the gross precipitation measurements for July to August 1996. Gross precipitation is the precipitation that falls that is not intercepted by tree canopies. These data are stored in ASCII text files. The HYD-08 gross precipitation data are available from the Earth Observing System Data and Information System (EOSDIS) Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC). The data files are available on a CD-ROM (see document number 20010000884).

  1. The MET/AXL/FGFR Inhibitor S49076 Impairs Aurora B Activity and Improves the Antitumor Efficacy of Radiotherapy.

    Science.gov (United States)

    Clémenson, Céline; Chargari, Cyrus; Liu, Winchygn; Mondini, Michele; Ferté, Charles; Burbridge, Mike F; Cattan, Valérie; Jacquet-Bescond, Anne; Deutsch, Eric

    2017-06-15

    Several therapeutic agents targeting HGF/MET signaling are under clinical development as single agents or in combination, notably with anti-EGFR therapies in non-small cell lung cancer (NSCLC). However, despite increasing data supporting a link between MET, irradiation, and cancer progression, no data regarding the combination of MET-targeting agents and radiotherapy are available from the clinic. S49076 is an oral ATP-competitive inhibitor of MET, AXL, and FGFR1-3 receptors that is currently in phase I/II clinical trials in combination with gefitinib in NSCLC patients whose tumors show resistance to EGFR inhibitors. Here, we studied the impact of S49076 on MET signaling, cell proliferation, and clonogenic survival in MET-dependent (GTL16 and U87-MG) and MET-independent (H441, H460, and A549) cells. Our data show that S49076 exerts its cytotoxic activity at low doses on MET-dependent cells through MET inhibition, whereas it inhibits growth of MET-independent cells at higher but clinically relevant doses by targeting Aurora B. Furthermore, we found that S49076 improves the antitumor efficacy of radiotherapy in both MET-dependent and MET-independent cell lines in vitro and in subcutaneous and orthotopic tumor models in vivo In conclusion, our study demonstrates that S49076 has dual antitumor activity and can be used in combination with radiotherapy for the treatment of both MET-dependent and MET-independent tumors. These results support the evaluation of combined treatment of S49076 with radiation in clinical trials without patient selection based on the tumor MET dependency status. Mol Cancer Ther; 16(10); 1-13. ©2017 AACR. ©2017 American Association for Cancer Research.

  2. 7 CFR 1424.7 - Gross payable units.

    Science.gov (United States)

    2010-01-01

    ...) Biodiesel producers will be eligible for payments on gross payable units for all biodiesel production from... rates. Unless otherwise determined by CCC, gross payable units for biodiesel production from eligible... biodiesel production gross payable units. (3) Adding the APP and BPP to determine biodiesel gross...

  3. Multiregional estimation of gross internal migration flows.

    Science.gov (United States)

    Foot, D K; Milne, W J

    1989-01-01

    "A multiregional model of gross internal migration flows is presented in this article. The interdependence of economic factors across all regions is recognized by imposing a non-stochastic adding-up constraint that requires total inmigration to equal total outmigration in each time period. An iterated system estimation technique is used to obtain asymptotically consistent and efficient parameter estimates. The model is estimated for gross migration flows among the Canadian provinces over the period 1962-86 and then is used to examine the likelihood of a wash-out effect in net migration models. The results indicate that previous approaches that use net migration equations may not always be empirically justified."

  4. The Gross conjecture over rational function fields

    Institute of Scientific and Technical Information of China (English)

    OUYANG; Yi

    2005-01-01

    We study the Gross conjecture for the cyclotomic function field extension k(∧f)/k where k = Fq(t) is the rational function field and f is a monic polynomial in Fq[t].We prove the conjecture in the Fermat curve case(i.e., when f = t(t - 1)) by a direct calculation. We also prove the case when f is irreducible, which is analogous to the Weil reciprocity law. In the general case, we manage to show the weak version of the Gross conjecture here.

  5. NEW APPROACH FOR TECHNOLOGY OF VOLUMETRIC – SUPERFICIAL HARDENING OF GEAR DETAILS OF THE BACK AXLE OF MOBILE MACHINES

    Directory of Open Access Journals (Sweden)

    A. I. Mihluk

    2010-01-01

    Full Text Available The new approach for technology of volumetric – superficial hardening of gear details of the back axle made of steel lowered harden ability is offered. This approach consisting in formation of intense – hardened condition on all surface of a detail.

  6. Analysis of axle and vehicle load properties through Bayesian networks based on weigh-in-motion data

    NARCIS (Netherlands)

    Morales Napoles, O.; Steenbergen, R.D.J.M.

    2014-01-01

    Weigh-in-Motion (WIM) systems are used, among other applications, in pavement and bridge reliability. The system measures quantities such as individual axle load, vehicular loads, vehicle speed, vehicle length and number ofaxles. Because ofthe nature ofúamc configuration, the quantities measured are

  7. The Axl receptor tyrosine kinase confers an adverse prognostic influence in pancreatic cancer and represents a new therapeutic target

    NARCIS (Netherlands)

    Koorstra, Jan-Bart M.; Karikari, Collins A.; Feldmann, Georg; Bisht, Savita; Rojas, Pamela Leal; Offerhaus, G. Johan A.; Alvarez, Hector; Maitra, Anirban

    2009-01-01

    Background: Pancreatic cancer is a near uniformly lethal disease and a better understanding of the molecular basis of this malignancy may lead to improved therapeutics. The Axl receptor tyrosine kinase is implicated in cellular transformation and tumor progression, although its role in pancreatic

  8. Analysis of axle and vehicle load properties through Bayesian networks based on weigh-in-motion data

    NARCIS (Netherlands)

    Morales Napoles, O.; Steenbergen, R.D.J.M.

    2014-01-01

    Weigh-in-Motion (WIM) systems are used, among other applications, in pavement and bridge reliability. The system measures quantities such as individual axle load, vehicular loads, vehicle speed, vehicle length and number ofaxles. Because ofthe nature ofúamc configuration, the quantities measured are

  9. Study on control schemes of flexible steering system of a multi-axle all-wheel-steering robot

    Directory of Open Access Journals (Sweden)

    Pingxia Zhang

    2016-05-01

    Full Text Available It is well known that a multi-axle wheeled robot possesses larger load capability and also higher drive performance. However, its steering flexibility is degraded due to the large number of wheels. In order to solve this problem, in this article, we proposed three control schemes based on the center of rotation or the steering angles of both the first- and last-axle wheels. To release these control schemes, steering mode selection and also the left wheel’s steering angle in a specific axle are added approaching a practical application. Thereafter, the remaining wheels’ steering angles can be calculated with the Ackerman steering theorem. In order to verify the control effects, a five-axle all-wheel-steering wheeled robot has been developed with the Bluetooth wireless monitor system. Based on the newly designed robot, validation experiments are carried out, such as lateral movement, situ rotation, and multi-mode steering within a narrow space. The results indicate that the proposed design in this article can ensure a more flexible and faster movement within a narrow space. It shows large potential in obstacle avoidance compared with the conventional partial-wheel steering mode.

  10. Phyllodes tumor of the breast: role of Axl and ST6GalNAcII in the development of mammary phyllodes tumors.

    Science.gov (United States)

    Ren, Dongliang; Li, Yanyan; Gong, Yanxin; Xu, Jingchao; Miao, Xiaolong; Li, Xiangnan; Liu, Chen; Jia, Li; Zhao, Yongfu

    2014-10-01

    Phyllodes tumor exhibits an aggressive growth. The expression of many biological markers has been explored to discriminate between different grades of phyllodes tumor and to predict their behavior. The purpose of this study was to evaluate the implications of Axl and ST6GalNAcII in phyllodes tumors. Real-time PCR, Western blot, and immunohistochemical were used to analyze differential expression of ST6GalNAcII and Axl in phyllodes tumor (PT) cell lines and tissue specimens. RNAi assay, ECM invasion assay, and tumorigenicity assay were used to analyze the altered expression of ST6GalNAcII gene effects on the expression of Axl and invasive ability of phyllodes tumor cells in vitro and in vivo. Compared to benign tumors, borderline and malignant ones showed a remarkable increase in mRNA levels of Axl and ST6GalNAcII gene, and it was higher in malignant tumor cells than in borderline tumor cells. When ST6GalNAcII was silenced, compared to the control, the expression level of Axl was significantly reduced in malignant tumor cell transfectants and knockdown of ST6GalNAcII gene significantly inhibited invasive activity in malignant tumor cells. The high expression of ST6GalNAcII and Axl was significantly correlated with tumor grade and distance metastasis by immunohistochemical analysis. Axl and ST6GalNAcII expression increases with increasing tumor grade in mammary phyllodes tumors. ST6GalNAc II might be participated in the glycosylation of Axl, and this Axl glycosylation may mediate the tumorigenicity, invasion, and distant metastasis of PT cells.

  11. Testosterone delays vascular smooth muscle cell senescence and inhibits collagen synthesis via the Gas6/Axl signaling pathway.

    Science.gov (United States)

    Chen, Yan-qing; Zhao, Jing; Jin, Cheng-wei; Li, Yi-hui; Tang, Meng-xiong; Wang, Zhi-hao; Zhang, Wei; Zhang, Yun; Li, Li; Zhong, Ming

    2016-06-01

    Testosterone deficiency is associated with a higher incidence of cardiovascular diseases in men. However, its effect on cell senescence, which plays a causal role in vascular aging, remains unclear. Here, we tested the hypothesis that testosterone alleviated vascular smooth muscle cell (VSMC) senescence and collagen synthesis via growth arrest-specific protein 6 (Gas6)/Axl- and Akt/FoxO1a-dependent pathways. Testosterone significantly ameliorated angiotensin II-induced VSMC senescence and collagen overexpression. In addition, testosterone inhibited angiotensin II-induced matrix metalloproteinase-2 (MMP-2) activity, which played a pivotal role in facilitating age-related collagen deposition. Testosterone increased the expression of tissue inhibitor of metalloproteinase-2 but decreased the expression of MMP-2 and membrane type-1 metalloproteinase which contributed to increase MMP-2 activity. The effects on VSMCs senescence and collagen synthesis were mediated by restoration of angiotensin II-induced downregulation of Gas6 and Axl expression and a subsequent reduction of Akt and FoxO1a phosphorylation. The effects of testosterone were reversed by a Gas6 blocker, Axl-Fc, and a specific inhibitor of Axl, R428. Treatment of VSMCs with PI3K inhibitor LY294002 abrogated the downregulating effect of testosterone on MMP-2 activity. Furthermore, when FoxO1a expression was silenced by using a specific siRNA, the inhibitory effect of testosterone on MMP-2 activity was revered as well, that indicated this process was Akt/FoxO1a dependence. Taken together, Gas6/Axl and Akt/FoxO1a were involved in protective effects of testosterone on VSMCs senescence and collagen synthesis. Our results provide a novel mechanism underlying the protective effect of testosterone on vascular aging and may serve as a theoretical basis for testosterone replacement therapy.

  12. Optimization Design of Vehicle Front Axle Structure Based on ABAQUS and TOSCA%基于ABAQUS与TOSCA的汽车前桥结构优化设计

    Institute of Scientific and Technical Information of China (English)

    马瑞雪; 王欣; 覃祯员; 张科峰

    2012-01-01

    应用ABAQUS软件对汽车前桥进行强度分析,针对车桥强度不足问题,通过TOSCA优化软件对前桥进行拓扑优化设计,在保证承栽能力的前提下有效减轻其重量。%The author analyze the vehicle front axle for the strength by ABAQUS software. In view of the axle strength shortage problem, they use TOSCA optimization software designing the front axle topological optimization structure,in order to effectively reduce its weight under the condition of its bearing capacity.

  13. Gross Revenue risk in Swiss dairy farming

    NARCIS (Netherlands)

    Benni, El N.; Finger, R.

    2013-01-01

    This study investigated how agricultural policy reforms, including market liberalization and market deregulation, have influenced gross revenue risk of Swiss dairy producers using farm-level panel data between 1990 and 2009. Based on detrended data, variance decomposition was applied to assess how o

  14. Gross Revenue risk in Swiss dairy farming

    NARCIS (Netherlands)

    Benni, El N.; Finger, R.

    2013-01-01

    This study investigated how agricultural policy reforms, including market liberalization and market deregulation, have influenced gross revenue risk of Swiss dairy producers using farm-level panel data between 1990 and 2009. Based on detrended data, variance decomposition was applied to assess how

  15. Levels of vibration transmitted to the operator of the tractor equipped with front axle suspension

    Directory of Open Access Journals (Sweden)

    Daniele Pochi

    2013-09-01

    Full Text Available In recent years the comfort and the preservation of the health of the operators became central issues in the evolution of agricultural machinery and led to the introduction of devices aimed at improving working conditions. Thereby, for instance, the presence of air conditioner, soundproof cab and driver seat suspension became normal on agricultural tractors. The vibrations are one of the most complex issues to deal with, being determined by the characteristics and interaction of elements such as tyres, axles, mainframe, cab and seat suspension. In this respect, manufacturers are trying to improve their products, even integrating these elements with new devices such as the suspension on the front axle of the tractor, aimed at reducing the level of vibrations during the transfers at high speed. One of these underwent tests at CRA-ING. Since its purpose is to reduce the level of vibration transmitted to the driver, their measurements in different points of the tractor and in different operating conditions, were compared in order to evaluate the effectiveness of the device, expressed as time of exposure. The suspension system of the front axle is designed to absorb the oscillations (especially pitching determined by irregularities in the road surface, allowing an increased control of the vehicle at high speed, as demonstrated by the test results and confirmed by the driving impressions outlined by the operator. The action of the device under these conditions results in an increase of the exposure time, important fact because of the relevance of the road transfer operations of tractors with mounted implements or trailers to tow and of the tendency to increase the speed limit for the road tractors (in Germany were brought to 50 km h–1 for several years. The action just described is less evident with increasing irregularity of the road surface and with the decrease of the travel speed. Nevertheless, in such conditions, the device appears to

  16. An appraisal of mass differences between individual tyres, axles and axle groups of a selection of heavy vehicles in South Africa

    CSIR Research Space (South Africa)

    De Beer, Morris

    2012-06-01

    Full Text Available study of 2 666 heavy vehicles (HVs) with Gross Combination Mass, (GCM) > 3 500 kg was conducted, where the mass (or weight) of each tyre (approximately 47 242 tyres (or wheels)) was measured. The measurements were done at slow speed over the SIM device...

  17. Design and Development of Animal Drawn Ground Metered Axle Mechanism Boom Sprayer

    Directory of Open Access Journals (Sweden)

    Michael C. Amonye

    2014-09-01

    Full Text Available A spraying technology was developed for use by rural farmers in Northern Nigeria. The farming systems in these areas are put into consideration and in keeping with appropriate technology initiative. The technology was designed to offer the farmers an equitable sprayer that shall be drawn by animal farm power and that is effective and affordable. The equipment was constructed using the parameters obtained from design and tested at a farmland within the University premises of Ahmadu Bello University, Zaria, in Nigeria. The equipment consists of a boom with multiple Controlled Droplet Applicator (CDA atomizer nozzles, a gear pump, a chemical tank, and chair for an operator; all attached to a framework bolted to a rear axle. It was observed that the Dynamic Wheel Load assuming even distribution of load was found to be 1575N and a net pull of 820N. The net pull offers convenient task and shall easily swallow energy requirement for spraying uphill terrains.

  18. Design of Model Following Variable Structure Controller for Three-axle Vehicle

    Institute of Scientific and Technical Information of China (English)

    管西强; 张建武; 屈求真

    2003-01-01

    An optimal control procedure is developed for the front and rear wheels of a three-axle vehicle moving on a complex typical road based on model following variable structure control strategy. The actual vehicle may be considered as an uncertain system. Cornering stiffness of front and rear wheels and external disturbances are varied in a limited range. The model-following variable structure control method is used to control both front and rear wheels steering operations of the vehicle, so that steering responses of the vehicle follow from those of the reference model. By numerical results obtained from computer simulation, it is demonstrated that the control system model can cope with the effects of parameter perturbations and outside disturbances.

  19. PROBABILISTIC MODELS FOR LONG FATIGUE CRACK GROWTH RATES OF LZ50 AXLE STEEL

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yong-xiang; HE Chao-ming; YANG Bing; HUANG Yu-zhong; GAO Qing; WU Ping-bo

    2005-01-01

    Experimental study is performed on the probabilistic models for the long fatigue crack growth rates (da/dN) of LZ50 axle steel. An equation for crack growth rate was derived to consider the trend of stress intensity factor range going down to the threshold and the average stress effect. The probabilistic models were presented on the equation. They consist of the probabilistic da/dN-△K relations, the confidence-based da/dN-△K relations, and the probabilistic- and confidence-based da/dN-△K relations.Efforts were made respectively to characterize the effects of probabilistic assessments due to the scattering regularity of test data, the number of sampling, and both of them.These relations can provide wide selections for practice. Analysis on the test data of LZ50 steel indicates that the present models are available and feasible.

  20. Development of a new time domain-based algorithm for train detection and axle counting

    Science.gov (United States)

    Allotta, B.; D'Adamio, P.; Meli, E.; Pugi, L.

    2015-12-01

    This paper presents an innovative train detection algorithm, able to perform the train localisation and, at the same time, to estimate its speed, the crossing times on a fixed point of the track and the axle number. The proposed solution uses the same approach to evaluate all these quantities, starting from the knowledge of generic track inputs directly measured on the track (for example, the vertical forces on the sleepers, the rail deformation and the rail stress). More particularly, all the inputs are processed through cross-correlation operations to extract the required information in terms of speed, crossing time instants and axle counter. This approach has the advantage to be simple and less invasive than the standard ones (it requires less equipment) and represents a more reliable and robust solution against numerical noise because it exploits the whole shape of the input signal and not only the peak values. A suitable and accurate multibody model of railway vehicle and flexible track has also been developed by the authors to test the algorithm when experimental data are not available and in general, under any operating conditions (fundamental to verify the algorithm accuracy and robustness). The railway vehicle chosen as benchmark is the Manchester Wagon, modelled in the Adams VI-Rail environment. The physical model of the flexible track has been implemented in the Matlab and Comsol Multiphysics environments. A simulation campaign has been performed to verify the performance and the robustness of the proposed algorithm, and the results are quite promising. The research has been carried out in cooperation with Ansaldo STS and ECM Spa.

  1. Activity level of gross α and gross β in airborne aerosol samples around the Qinshan NPP

    Institute of Scientific and Technical Information of China (English)

    CHEN Bin; YE Jida; CHEN Qianyuan; WU Xiaofei; SONG Weili; WANG Hongfeng

    2007-01-01

    The monitoring results of gross α and gross β activity from 2001 to 2005 for environmental airborne aerosol samples around the Qinshan NPP base are presented in this paper. A total of 170 aerosol samples were collected from monitoring sites of Caichenmen village, Qinlian village, Xiajiawan village and Yangliucun village around the Qinshan NPP base. The measured specific activity of gross α and gross β are in the range of 0.02 ~ 0.38 mBq/m3 and 0.10 ~ 1.81 mBq/m3, respectively, with an average of 0.11 mBq/m3 and 0.45mBq/m3, respectively. They are lower than the average of 0.15 mBq/m3 and 0.52mBq/m3, of reference site at Hangzhou City. It is indicated that the specific activity of gross α and gross β for environmental aerosol samples around the Qinshan NPP base had not been increased in normal operating conditions of the NPP.

  2. Noncommutative complex Grosse-Wulkenhaar model

    CERN Document Server

    Hounkonnou, Mahouton Norbert

    2012-01-01

    This paper stands for an application of the noncommutative (NC) Noether theorem, given in our previous work [AIP Proc 956 (2007) 55-60], for the NC complex Grosse-Wulkenhaar model. It provides with an extension of a recent work [Physics Letters B 653 (2007) 343-345]. The local conservation of energy-momentum tensors (EMTs) is recovered using improvement procedures based on Moyal algebraic techniques. Broken dilatation symmetry is discussed. NC gauge currents are also explicitly computed.

  3. Optic-electronic systems for measurement the three-dimension angular deformation of axles at the millimeter wave range radiotelescope

    Science.gov (United States)

    Konyakhin, Igor A.; Kopylova, Tatyana V.; Konyakhin, Alexsey I.; Smekhov, Andrey A.

    2013-01-01

    Researches in the millimetre wave range require the high accuracy for position of the mirror components of the radiotelescope. A mirror weight is the cause of the three-dimension angular deformation of the elevation axle and azimuth axle relatively bearings. At result the elevation angle and azimuth angle of a parabolic mirror axis orientation is not equal to the set values. For the measuring roll, pitch and yaw angular deformations the autocollimation system with new type of the reflector are used. Reflector for autocollimation measurements as compositions of the anamorphic prism and special tetrahedral reflector is described. New methods for roll, pitch, yaw angles measuring are discussed. Optical scheme for the measurement system, structure the anamorphic prism and tetrahedral reflector are proposed. Equations for the static characteristic of the measuring system are shown.

  4. The Gross Motor Skills of Children with Mild Learning Disabilities

    Science.gov (United States)

    Nonis, Karen P.; Jernice, Tan Sing Yee

    2014-01-01

    Many international studies have examined the gross motor skills of children studying in special schools while local studies of such nature are limited. This study investigated the gross motor skills of children with Mild Learning Disabilities (MLD; n = 14, M age = 8.93 years, SD = 0.33) with the Test of Gross Motor Development-2 (TGMD-2, Ulrich,…

  5. 7 CFR 1410.44 - Average adjusted gross income.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Average adjusted gross income. 1410.44 Section 1410... Average adjusted gross income. (a) Benefits under this part will not be available to persons or legal entities whose average adjusted gross income exceeds $1,000,000 or as further specified in part...

  6. 7 CFR 701.17 - Average adjusted gross income limitation.

    Science.gov (United States)

    2010-01-01

    ... 9003), each applicant must meet the provisions of the Adjusted Gross Income Limitations at 7 CFR part... 7 Agriculture 7 2010-01-01 2010-01-01 false Average adjusted gross income limitation. 701.17... RELATED PROGRAMS PREVIOUSLY ADMINISTERED UNDER THIS PART § 701.17 Average adjusted gross income...

  7. AP-2α regulates migration of GN-11 neurons via a specific genetic programme involving the Axl receptor tyrosine kinase

    Directory of Open Access Journals (Sweden)

    Orso Francesca

    2009-05-01

    Full Text Available Abstract Background Neuronal migration is a crucial process that allows neurons to reach their correct target location to allow the nervous system to function properly. AP-2α is a transcription factor essential for neural crest cell migration and its mutation results in apoptosis within this cell population, as demonstrated by genetic models. Results We down-modulated AP-2α expression in GN-11 neurons by RNA interference and observe reduced neuron migration following the activation of a specific genetic programme including the Adhesion Related Kinase (Axl gene. We prove that Axl is able to coordinate migration per se and by ChIP and promoter analysis we observe that its transcription is directly driven by AP-2α via the binding to one or more functional AP-2α binding sites present in its regulatory region. Analysis of migration in AP-2α null mouse embryo fibroblasts also reveals an essential role for AP-2α in cell movement via the activation of a distinct genetic programme. Conclusion We show that AP-2α plays an essential role in cell movement via the activation of cell-specific genetic programmes. Moreover, we demonstrate that the AP-2α regulated gene Axl is an essential player in GN-11 neuron migration.

  8. Baryons in Massive Gross-Neveu Models

    CERN Document Server

    Thies, M; Thies, Michael; Urlichs, Konrad

    2005-01-01

    Baryons in the large N limit of (1+1)-dimensional Gross-Neveu models with either discrete or continuous chiral symmetry have long been known. We generalize their construction to the case where the symmetry is explicitly broken by a bare mass term in the Lagrangian. In the discrete symmetry case, the exact solution is found for arbitrary bare fermion mass, using the Hartree-Fock approach. In the continuous symmetry case, a derivative expansion allows us to rederive a formerly proposed Skyrme-type model and to compute systematically corrections to the leading order description based on an effective sine-Gordon theory.

  9. Strong Expression of Hypoxia-Inducible Factor-1α (HIF-1α Is Associated with Axl Expression and Features of Aggressive Tumors in African Breast Cancer.

    Directory of Open Access Journals (Sweden)

    Hawa Nalwoga

    Full Text Available Inhibition of hypoxia-inducible factor (HIF and Axl receptor tyrosine kinase is being evaluated for targeted therapy in solid tumors. Both HIF-1α and Axl influence tumor growth and metastatic potential, and they have been linked to treatment failure in many cancers. However, there is a lack of reports on HIF-1α expression in African breast cancer, which has a poor prognosis, and novel treatment targets must therefore be established. Here, we aimed to evaluate HIF-1α in relation to Axl expression, angiogenesis markers, and other tumor characteristics in a series of African breast cancer.Using immunohistochemistry, we examined 261 invasive breast cancers on tissue microarrays for HIF-1α and Axl as well as several other markers, and a subset of 185 cases had information on VEGF (vascular endothelial growth factor expression, microvessel density (MVD, proliferating microvessel density (pMVD and vascular proliferation index (VPI for important comparisons.Strong HIF-1α expression was associated with increased Axl (p = 0.007, VEGF (p<0.0005, and p53 (p = 0.032 expression, as well as high tumor cell proliferation by Ki-67 (p = 0.006, and high tumor grade (p = 0.003. Tumors with strong HIF-1α expression had significantly higher MVD (p = 0.019 and higher pMVD (p = 0.027 than tumors with weak expression.High HIF-1α expression is significantly associated with Axl and VEGF expression, and with markers of poor prognosis in this series of breast cancer, suggesting HIF-1α and Axl as potential therapeutic targets in African breast cancer.

  10. Acceleration Slip Regulation Strategy for Distributed Drive Electric Vehicles with Independent Front Axle Drive Motors

    Directory of Open Access Journals (Sweden)

    Lingfei Wu

    2015-05-01

    Full Text Available This paper presents an acceleration slip regulation strategy for distributed drive electric vehicles with two motors on the front axle. The tasks of the strategy include controlling the slip ratio to make full use of the road grip and controlling the yaw rate to eliminate the lateral movement due to the difference between motor torques. The rate of the slip ratio change can be controlled by controlling the motor torque, so that the slip ratio can be controlled by applying a proportional-integral control strategy to control the rate of the slip ratio change. The yaw rate can be controlled to almost zero by applying torque compensation based on yaw rate feedback. A coordination control strategy for the slip ratio control and yaw rate control is proposed based on analysis of the priorities and features of the two control processes. Simulations were carried out using MATLAB/Simulink, and experiments were performed on a hardware-in-loop test bench with actual motors. The results of the simulations and experiments showed that the proposed strategy could improve the longitudinal driving performance and straight line driving stability of the vehicle.

  11. Thermal Property Analysis of Axle Load Sensors for Weighing Vehicles in Weigh-in-Motion System

    Directory of Open Access Journals (Sweden)

    Piotr Burnos

    2016-12-01

    Full Text Available Systems which permit the weighing of vehicles in motion are called dynamic Weigh-in-Motion scales. In such systems, axle load sensors are embedded in the pavement. Among the influencing factors that negatively affect weighing accuracy is the pavement temperature. This paper presents a detailed analysis of this phenomenon and describes the properties of polymer, quartz and bending plate load sensors. The studies were conducted in two ways: at roadside Weigh-in-Motion sites and at a laboratory using a climate chamber. For accuracy assessment of roadside systems, the reference vehicle method was used. The pavement temperature influence on the weighing error was experimentally investigated as well as a non-uniform temperature distribution along and across the Weigh-in-Motion site. Tests carried out in the climatic chamber allowed the influence of temperature on the sensor intrinsic error to be determined. The results presented clearly show that all kinds of sensors are temperature sensitive. This is a new finding, as up to now the quartz and bending plate sensors were considered insensitive to this factor.

  12. Thermal Property Analysis of Axle Load Sensors for Weighing Vehicles in Weigh-in-Motion System.

    Science.gov (United States)

    Burnos, Piotr; Gajda, Janusz

    2016-12-15

    Systems which permit the weighing of vehicles in motion are called dynamic Weigh-in-Motion scales. In such systems, axle load sensors are embedded in the pavement. Among the influencing factors that negatively affect weighing accuracy is the pavement temperature. This paper presents a detailed analysis of this phenomenon and describes the properties of polymer, quartz and bending plate load sensors. The studies were conducted in two ways: at roadside Weigh-in-Motion sites and at a laboratory using a climate chamber. For accuracy assessment of roadside systems, the reference vehicle method was used. The pavement temperature influence on the weighing error was experimentally investigated as well as a non-uniform temperature distribution along and across the Weigh-in-Motion site. Tests carried out in the climatic chamber allowed the influence of temperature on the sensor intrinsic error to be determined. The results presented clearly show that all kinds of sensors are temperature sensitive. This is a new finding, as up to now the quartz and bending plate sensors were considered insensitive to this factor.

  13. Development and characterization of K562 cell clones expressing BCL11A-XL: Decreased hemoglobin production with fetal hemoglobin inducers and its rescue with mithramycin

    Science.gov (United States)

    Finotti, Alessia; Gasparello, Jessica; Breveglieri, Giulia; Cosenza, Lucia Carmela; Montagner, Giulia; Bresciani, Alberto; Altamura, Sergio; Bianchi, Nicoletta; Martini, Elisa; Gallerani, Eleonora; Borgatti, Monica; Gambari, Roberto

    2015-01-01

    Induction of fetal hemoglobin (HbF) is considered a promising strategy in the treatment of β-thalassemia, in which production of adult hemoglobin (HbA) is impaired by mutations affecting the β-globin gene. Recent results indicate that B-cell lymphoma/leukemia 11A (BCL11A) is a major repressor of γ-globin gene expression. Therefore, disrupting the binding of the BCL11A transcriptional repressor complex to the γ-globin gene promoter provides a novel approach for inducing expression of the γ-globin genes. To develop a cellular screening system for the identification of BCL11A inhibitors, we produced K562 cell clones with integrated copies of a BCL11A-XL expressing vector. We characterized 12 K562 clones expressing different levels of BCL11A-XL and found that a clear inverse relationship does exist between the levels of BCL11A-XL and the extent of hemoglobinization induced by a panel of HbF inducers. Using mithramycin as an inducer, we found that this molecule was the only HbF inducer efficient in rescuing the ability to differentiate along the erythroid program, even in K562 cell clones expressing high levels of BCL11A-XL, suggesting that BCL11A-XL activity is counteracted by mithramycin. PMID:26342260

  14. Kinome-wide shRNA Screen Identifies the Receptor Tyrosine Kinase AXL as a Key Regulator for Mesenchymal Glioblastoma Stem-like Cells

    Directory of Open Access Journals (Sweden)

    Peng Cheng

    2015-05-01

    Full Text Available Glioblastoma is a highly lethal cancer for which novel therapeutics are urgently needed. Two distinct subtypes of glioblastoma stem-like cells (GSCs were recently identified: mesenchymal (MES and proneural (PN. To identify mechanisms to target the more aggressive MES GSCs, we combined transcriptomic expression analysis and kinome-wide short hairpin RNA screening of MES and PN GSCs. In comparison to PN GSCs, we found significant upregulation and phosphorylation of the receptor tyrosine kinase AXL in MES GSCs. Knockdown of AXL significantly decreased MES GSC self-renewal capacity in vitro and inhibited the growth of glioblastoma patient-derived xenografts. Moreover, inhibition of AXL with shRNA or pharmacologic inhibitors also increased cell death significantly more in MES GSCs. Clinically, AXL expression was elevated in the MES GBM subtype and significantly correlated with poor prognosis in multiple cancers. In conclusion, we identified AXL as a potential molecular target for novel approaches to treat glioblastoma and other solid cancers.

  15. [Gross anatomy dissection and the legal control].

    Science.gov (United States)

    Yamashina, Shohei; Shibata, Yosaburo

    2010-12-01

    In Japan, dissection of human body is generally prohibited by the Penal Code, i.e. the criminal law. However, the Postmortem Examination and Corpse Preservation Act allows for the dissection of the body in very limited situations, that include gross anatomy dissection and pathological and forensic autopsy in medical and dental schools. Growing numbers of co-medical schools have been founded more recently in Japan, and not a small number of co-medical schools try to adopt human body dissection in the course of anatomy education. The present short communication reminds us of the ways of thinking of the Postmortem Examination and Corpse Preservation Act and the Act on Body Donation for Medical and Dental Education in order that anatomy education in medical as well as co-medical schools takes place under the regulation by these two laws.

  16. Robust Principal Component Test in Gross Error Detection and Identification

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Principle component analysis (PCA) based chi-square test is more sensitive to subtle gross errors and has greater power to correctly detect gross errors than classical chi-square test. However, classical principal component test (PCT) is non-robust and can be very sensitive to one or more outliers. In this paper, a Huber function liked robust weight factor was added in the collective chi-square test to eliminate the influence of gross errors on the PCT. Meanwhile, robust chi-square test was applied to modified simultaneous estimation of gross error (MSEGE) strategy to detect and identify multiple gross errors. Simulation results show that the proposed robust test can reduce the possibility of type Ⅱ errors effectively. Adding robust chi-square test into MSEGE does not obviously improve the power of multiple gross error identification, the proposed approach considers the influence of outliers on hypothesis statistic test and is more reasonable.

  17. Effect of temperate climate tree species on gross ammonification, gross nitrification and N2O formation

    Science.gov (United States)

    Brüggemann, N.; Rosenkranz, P.; Papen, H.; Butterbach-Bahl, K.

    2003-04-01

    Microbial nitrogen turnover processes in the soil, like ammonification, nitrification and denitrification, play an important role in the formation of nitrous oxide (N2O): (i) ammonification, because it releases nitrogen from organic material in the form of ammonium (NH4+), which in turn can serve as substrate for nitrification; (ii) nitrification itself (i.e. the turnover of NH4+ to nitrate, NO3-), during which nitric oxide (NO) and N2O can be released as by-products at varying ratios; (iii) denitrification, in which NO3- serves as electron acceptor and is converted to molecular nitrogen (N2) via NO and N2O as intermediates, that can also be partially lost to the atmosphere. Temperate forest soils are a substantial source of atmospheric N2O contributing up to 10% to the total atmospheric N2O budget. However, this figure is afflicted with a huge uncertainty due to a number of factors governing the soil N2O formation, consumption, release and uptake, which are not fully understood at present. To one of these factors belongs the influence of the tree species on nitrogen turnover processes in the soil and the formation of N trace gases related with them. The aim of the present work was to analyse this tree species effect for the temperate climate region. For this purpose the effect of five different temperate tree species, having the same age and growing on the same soil in direct vicinity to each other, on gross ammonification and gross nitrification as well as on N2O formation was investigated. The trees (common beech, Fagus sylvatica; pedunculate oak, Quercus robur; Norway spruce, Picea abies; Japanese larch, Larix leptolepis; mountain pine, Pinus mugo) were part of a species trial in Western Jutland, Denmark, established in 1965 on a former sandy heathland. Samples from the soil under these five tree species were taken in spring and in summer 2002, respectively, differentiating between organic layer and mineral soil. The gross rates of ammonification as well of

  18. Effect of cerebrolysin on gross motor function of children with cerebral palsy: a clinical trial.

    Science.gov (United States)

    Nasiri, Jafar; Safavifar, Faezeh

    2017-01-10

    Gross motor dysfunction is considered as the most challenging problem in cerebral palsy (CP). It is proven that improvement of gross motor function could reduce CP-related disabilities and provide better quality of life in this group of patients. Therefore, the aim of this trial is to evaluate the effectiveness of cerebrolysin (CBL) on gross motor function of children with CP who are undergoing treatment. In this clinical trial study, paediatric patients aged 18-75 months with spastic diplegic or quadriplegic cerebral palsy, who were under rehabilitation therapy, were selected and randomly allocated in control and CBL groups. Patients in CBL group underwent treatment with standard rehabilitation therapy plus CBL. The latter was administrated intramuscularly as a single daily dose of 0.1 cc/kg for 10 days and then continued weekly for 4 months. Gross motor function of participants in the two studied groups, before and after trial, was evaluated and compared using the validated Persian version of gross motor function classification system-expanded and revised (GMFCS-E&R). During this trial, 108 patients with CP were evaluated for eligibility. From these, 50 patients were enrolled and randomly allocated in the CBL and control groups. Four months after trial, the mean level of GMFCS decreased significantly in the two groups (P < 0.05). However, it was significantly lower in the CBL group than in the control group (2.1 vs. 3.16, P < 0.05). The results of this trial indicated that CBL could improve gross motor function in patients with CP. This finding is consistent with neurotrophic and neuroprotective effects of CBL, which have been reported in various clinical trials in other neurological disorders. Further studies are recommended to establish the value of continued neuroprotection and to determine the pharmacokinetics/dynamics of CBL in this group of patients.

  19. 拖拉机前驱动桥的涂装工艺研究%Research of Coating Process of Tractor Front Drive Axle

    Institute of Scientific and Technical Information of China (English)

    王智红

    2012-01-01

    For appearance quality requirements of front drive axles used in tractors ,the coating process of front drive axles is researched and designed. The production practices prove that the coated front drive axle has a good corrosion resistance, and this can lengthen Service life and improve use value of the product.%针对拖拉机前驱动桥外观品质的要求,研究并设计了前驱动桥涂装工艺。生产实践证明,涂装后的前驱动桥具有良好的耐腐蚀性,不仅延长了使用寿命,而且还提高了产品的使用价值。

  20. Vibration control of bridge subjected to multi-axle vehicle using multiple tuned mass friction dampers

    Science.gov (United States)

    Pisal, Alka Y.; Jangid, R. S.

    2016-06-01

    The effectiveness of tuned mass friction damper (TMFD) in reducing undesirable resonant response of the bridge subjected to multi-axle vehicular load is investigated. A Taiwan high-speed railway (THSR) bridge subjected to Japanese SKS (Salkesa) train load is considered. The bridge is idealized as a simply supported Euler-Bernoulli beam with uniform properties throughout the length of the bridge, and the train's vehicular load is modeled as a series of moving forces. Simplified model of vehicle, bridge and TMFD system has been considered to derive coupled differential equations of motion which is solved numerically using the Newmark's linear acceleration method. The critical train velocities at which the bridge undergoes resonant vibration are investigated. Response of the bridge is studied for three different arrangements of TMFD systems, namely, TMFD attached at mid-span of the bridge, multiple tuned mass friction dampers (MTMFD) system concentrated at mid-span of the bridge and MTMFD system with distributed TMFD units along the length of the bridge. The optimum parameters of each TMFD system are found out. It has been demonstrated that an optimized MTMFD system concentrated at mid-span of the bridge is more effective than an optimized TMFD at the same place with the same total mass and an optimized MTMFD system having TMFD units distributed along the length of the bridge. However, the distributed MTMFD system is more effective than an optimized TMFD system, provided that TMFD units of MTMFD system are distributed within certain limiting interval and the frequency of TMFD units is appropriately distributed.

  1. Differential expression of the ufo/axl oncogene in human leukemia-lymphoma cell lines.

    Science.gov (United States)

    Challier, C; Uphoff, C C; Janssen, J W; Drexler, H G

    1996-05-01

    The ufo protein (also termed axl) is a member of a new family of receptor tyrosine kinases and is encoded by a transforming gene that was initially isolated from primary human myeloid leukemia cells by DNA-mediated transformation of NIH/3T3 cells. The ligand, Gas6, a protein S-related molecule lacking any known function yet, has recently been identified. We report the expression pattern of ufo mRNA in a panel of 76 human continuous leukemia-lymphoma cell lines. The gene was not expressed in cell lines derived from lymphoid malignancies (n=28), but transcription was seen in 3/11 myeloid, 0/6 monocytic, 9/13 erythroid and 11/18 megakaryocytic cell lines. Several cell lines were treated with phorbol ester leading to significant upregulation of the ufo message in constitutively positive cells. An apparent ufo mRNA overexpression was not found in any of the positive leukemia cell lines, but was identified in the drug-resistant subclones of the cervix carcinoma cell line HeLa. Southern blot analysis of restriction enzyme-digested genomic DNA did not provide evidence for gene amplification, but the HeLa subclones showed banding patterns suggestive of gene rearrangement. Two main ufo mRNA bands of 3.2 and 5.0 kb were identified; no differences in the half-lives (t1/2 = 2.5 h) of these two mRNA species could be identified. In summary, ufo, representing a novel type of receptor tyrosine kinase, is expressed solely in myeloid and erythro-megakaryocytic leukemias but not in lymphoid malignancies. These and previous data suggest an involvement of the ufo receptor tyrosine kinase in normal and malignant myelopoiesis; however, its exact role, if any, and mode of operation in leukemogenesis remains to be determined.

  2. On Methods of Solving the Axle Grinding Produces Denim and Burns%浅析解决车轴磨削产生斜纹及烧伤的方法

    Institute of Scientific and Technical Information of China (English)

    王长峰; 郭文荣

    2013-01-01

    车轴表面磨削加工中存在斜纹一直是困扰车轴生产的主要问题。通过对车轴磨削过程中砂轮、工装、设备、皂化液等因素的研究,查找车轴磨削表面产生斜纹、烧伤的原因,并提出相应的解决办法,为提高车轴生产质量提供保障。%The present axle twill surface grinding axle production has been plagued major problem. Through the process of grinding wheel axle, tooling, equipment, and other factors saponification research.In this paper, we find the axle grinding sur-face twill, burn causes and propose appropriate solutions to improve production quality axle to provide protection.

  3. Thoughts on Process Design of Ji'nan West Wheel Axle Workshop%济南西轮轴车间工艺设计思考

    Institute of Scientific and Technical Information of China (English)

    赵勇

    2012-01-01

    This paper, according to the relevant design contents of wheel axle workshop of Ji'nan West Rolling Stock Depot, investigates comprehensively the whole maintenance process and the equipment configuration of wheel axle's overhaul, from several aspects such as the function partitioning of inspection and repair depots, wheelset-input inspection , wheelset-export inspection, mechanical processing of wheel axle, HMIS system and so on. Moreover, the paper introduces emphatically the working principle, main features and the related functions about the process line which consists of the loading and unloading robot, axle transmission line, wheel transmission line, and the press-fit units. In addition, this paper summarizes the entire maintenance process in relation to the wheel axle's automation and process line's maintenance, with a view to provide reference for wheel axle repair design of other projects.%根据济南西车辆段轮轴车间设计相关内容,从轮轴检修库房工艺功能划分、轮对收入检查部分、轮对支出检查部分、车轴轮片机械加工部分、HMIS系统等几个方面入手,全面探讨轮轴大修的整个检修工艺流程和设备配置情况,并着重介绍上下料机械手、车轴输送线、车轮输送线和压装单元组成的工艺流水线的工作原理、主要特点和相关功能.总结轮轴自动化、流水线检修的整个检修工艺流程,可为其他工程轮轴检修设计提供参考依据.

  4. 基于ANSYS Workbench 的前轴分析和优化设计%ANSYS Workbench Based Analysis and Optimization Design of Front Axle

    Institute of Scientific and Technical Information of China (English)

    赵凯; 曾亿山; 牛家忠

    2015-01-01

    汽车车桥是汽车上主要承载构件之一,对其进行分析和优化十分必要。以某公司生产的前桥前轴为例,先建立前轴的Pro/E三维模型,后导入 ANSYS Workbench ,在几种不同的路况上对前轴进行静态分析,结果表明前轴在应力大小方面能满足要求。在此基础上结合实际情况,并以质量最小化为最终目的,对前轴进行了形状优化和尺寸优化,为前轴的实际制造和优化改进提供理论依据。%As one of the main carrying components of automobile , the analysis and optimization of automobile axle is necessary . Firstly ,the three‐dimensional model of the front axle was set up in Pro/E ,the model was imported into ANSYS Workbench ,and the static analysis of the front axle in several different conditions was conducted ,the results showed that the front axle in the stress could meet the requirements .Then ,based on the static analysis ,the shape and size of the front axle were optimized ,and the ultimate aim was to minimize the mass ,it would provide a theoretical basis for the practical manufacturing and optimization of front axle .

  5. Propiedades estructurales de ejes huecos y sólidos con una grieta plana//Structural proprieties of hollow and whole axles, with a flat crack

    Directory of Open Access Journals (Sweden)

    Jon‐Ariza De‐Miguel

    2014-05-01

    Full Text Available En este trabajo se estudiaron las diversas ventajas constructivas que los ejes huecos presentan respecto a los sólidos, como la reducción de masa, mejor control de calidad, menores defectos en producción y facilidad de acoplamiento. De ahí su profusión en aplicaciones industriales, como ejes de ferrocarril, de reductores o en calandrias. Dichas ventajas se ven alteradas cuando el eje trabaja a fatiga en flexión rotativa y aparece una grieta sobre el mismo. Se comprobaron dichas ventajas y sus variaciones sobre un modelo inicial de una grieta plana superficial, y se ha observado que los ejes huecos resultan más perjudicados por estas grietas para ciertos valores del diámetro interior, mientras que para otros son ventajosos. Se concluye del presente estudio que puede establecerse un rango de valores para el diámetro interior de ejes huecos en el cual su aprovechamiento seríaóptimo.Palabras claves: ejes huecos y sólidos, propiedades estructurales, grieta plana.______________________________________________________________________________AbstractThis work studies the several advantages hollow axles show when compared to whole ones, such as lightness, better quality control, less manufacturing defects, coupling simplicity. Thence their being profusely employed in industry, in applications like railway axles, gearboxes or calenders. Theseadvantages are altered when the axle works under bending with rotation under fatigue and a crack appears on its surface. An analytical research upon a flat surface crack model has been made of these advantages and their variations and it has been observed that hollow axles suffer more from these cracks than whole ones for certain inner diameter values, whereas for others even less than whole ones. It can be deduced that a gap for the inner diameter can be ascertained, where the axle´s rendering would be optimal.Key words: hollowand whole axles, structural properties, flat crack.

  6. TERATOGENIC EFFECTS OF SILVER NANOPARTICLES: GROSS ANOMALIES

    Directory of Open Access Journals (Sweden)

    Jyoti Prakash

    2015-07-01

    Full Text Available BACK GROUND: Prenatal exposure of AgNPs can induces devastative and detrimental effect in the organogenesis period of the developing embryos and foetuses. Organogenesis period is highly condemnatory and persuadable. Any injury to embryo during this period leads to dysmorphogenesis or even death AIM: The present study means to evaluate the gross anomalies on developing f o etus subsequent to silver nanoparticle ingestion during the gestational period. MATERIAL & METHOD: Random selections of pregnant Swiss albino mice were selected. AgNPs, of 20 - 100 nm size ra nge, were administered to pregnant mice by repeated oral gavages at concentra tions of 0.5, 1, 5, 10, 15 & 20 mg/kg/day during 4 - 17 gestational day. All dams were subjected to exteriorization on GD 18. The fetuses were evaluated for body malformation effects . RESULTS: Repeated oral gavages treatment with AgNPs at a concentration of 0.5mg/kg/day caused resorption (4.61% and intra uterine growth retardation (7.69% with no gross morphology alteration. 1 mg/kg/day caused resorption (9.23% and intra uterine growth retardation (10.76% with a rare case of haemorrhagic conception (1.53%, 5mg/kg/day caused limb malformation (7.01% resorption (17.54% and intra uterine growth retardation (17.54%, closed type Neural tube deformity (5.26%, 10mg/kg/day caused 20 % of limb malformation including Amelia, foot and tail vein hemorrhages and simple tail vein haemorrhage (3.50% each, resorption (22.80%, intra uterine growth retardation (29.82%, 15mg/kg/day caused severe hemorrhage within the entire body (22.80%, lim b anomaly including syndactyly and oligodactyly (8.77%, resorption (42.10%, intra uterine growth retardation (45.61%, 20mg/kg/day caused Omphalocele (3.27%, Bidiscoidal placental anomaly (9.83%, resorption (29.50% and intra uterine growth retardation (62.29%. CONCLUSION: The results show that a repeated oral dose of AgNPs during pregnancy caused fetal body dysmorphogenesis which is dose

  7. 转向前轴轮毂轴承游隙探讨分析%Analysis of Hub Bearing Clearance on Front Axle

    Institute of Scientific and Technical Information of China (English)

    刘德林

    2012-01-01

    This paper introduces the classification of hub bearing clearance on front axle, and the affect of clearance to bearing. Meanwhile discuss the adjust and test way of bearing clearance, cliff the bearing clearances between truck and bus front axles.%本文介绍了转向前轴轮毂轴承游隙的分类,游隙大小对轴承的影响,探讨了轴承游隙的调整与检测方法,区分了货车与客车前轴轴承游隙。

  8. Rear axle structure design of DD32/120 series%DD32/120系列后桥结构设计

    Institute of Scientific and Technical Information of China (English)

    廖红利; 杨爱民

    2012-01-01

    详细论了DD32/120系列后桥设计方案,对从动齿轮与桥壳间隙及从动齿轮与主减速器壳前轴承座间隙进行了计算。%Detailed discuss the rear axle design scheme of DD32/120 series,make calculation for driven gear and axle housing clearance and driven gear and front-end bearing pedestal of main reducing housing.

  9. Gross revenue risk in Swiss dairy farming.

    Science.gov (United States)

    El Benni, N; Finger, R

    2013-02-01

    This study investigated how agricultural policy reforms, including market liberalization and market deregulation, have influenced gross revenue risk of Swiss dairy producers using farm-level panel data between 1990 and 2009. Based on detrended data, variance decomposition was applied to assess how output prices and yields contributed to revenue risk over 3 different periods: the whole period (1990-2009), the first decade (1990-1999), and the second decade (1999-2009). In addition, the effect of expected changes in animal-based support for roughage-consuming cattle and price volatility on revenue risk was evaluated using a simulation model. Prices were the main contributor to revenue risk, even if the importance of yield risk increased over time. Swiss dairy producers can profit from natural hedge but market deregulation and market liberalization have reduced the natural hedge at the farm level. An increase in price volatility would substantially increase revenue risk and would, together with the abandonment of direct payments, reduce the comparative advantage of dairy production for risk-averse decision makers. Depending on other available risk management strategies, price risk management instruments might be a valuable solution for Swiss dairy producers in the future.

  10. Guidelines for Standard Photography in Gross and Clinical Anatomy

    Science.gov (United States)

    Barut, Cagatay; Ertilav, Hakan

    2011-01-01

    Photography has a widespread usage in medicine and anatomy. In this review, authors focused on the usage of photography in gross and clinical anatomy. Photography in gross and clinical anatomy is not only essential for accurate documentation of morphological findings but also important in sharing knowledge and experience. Photographs of cadavers…

  11. 26 CFR 1.61-4 - Gross income of farmers.

    Science.gov (United States)

    2010-04-01

    ... Gross income of farmers. (a) Farmers using the cash method of accounting. A farmer using the cash receipts and disbursements method of accounting shall include in his gross income for the taxable year— (1) The amount of cash and the value of merchandise or other property received during the taxable...

  12. Guidelines for Standard Photography in Gross and Clinical Anatomy

    Science.gov (United States)

    Barut, Cagatay; Ertilav, Hakan

    2011-01-01

    Photography has a widespread usage in medicine and anatomy. In this review, authors focused on the usage of photography in gross and clinical anatomy. Photography in gross and clinical anatomy is not only essential for accurate documentation of morphological findings but also important in sharing knowledge and experience. Photographs of cadavers…

  13. Psychiatric Symptoms in Children with Gross Motor Problems

    Science.gov (United States)

    Emck, Claudia; Bosscher, Ruud J.; van Wieringen, Piet C. W.; Doreleijers, Theo; Beek, Peter J.

    2012-01-01

    Children with psychiatric disorders often demonstrate gross motor problems. This study investigates if the reverse also holds true by assessing psychiatric symptoms present in children with gross motor problems. Emotional, behavioral, and autism spectrum disorders (ASD), as well as psychosocial problems, were assessed in a sample of 40 children…

  14. The Gross Anatomy Course: An Analysis of Its Importance

    Science.gov (United States)

    Bockers, Anja; Jerg-Bretzke, Lucia; Lamp, Christoph; Brinkmann, Anke; Traue, Harald C.; Bockers, Tobias M.

    2010-01-01

    The gross anatomy dissection course is a cost-intensive piece of undergraduate medical education that students and professionals alike describe as very important within the overall medical curriculum. We sought to understand more explicitly students' valuation of gross anatomy as an "important" course and so developed a quantitative…

  15. Vehicle design influences whole body vibration exposures: effect of the location of the front axle relative to the cab.

    Science.gov (United States)

    Blood, Ryan P; Rynell, Patrik W; Johnson, Peter W

    2011-06-01

    Using a repeated measure design, this study compared differences in whole body vibration (WBV) exposures among 13 drivers who drove a truck with the cab over the front axle (cab-over design) and a truck with the cab situated behind the front axle (non-cab-over design). The drivers drove both trucks over a standardized route that comprised three distinct segments: a freeway segment, a city street segment with stop-and-go driving (traffic lights), and a city street segment without traffic lights. A portable WBV data acquisition system collected tri-axial time-weighted and raw WBV data per ISO 2631-1 and 2631-5 standards. Simultaneous global positioning system (GPS) data were also collected to compare vehicle speeds. The GPS data indicated that there were no speed differences between the two vehicles. However, average and impulsive z-axis vibration levels were significantly higher for the cab-over design than for the non-cab-over design. In addition, significant WBV exposure differences between road types were found, with the freeway segments having the lowest exposures and the city street segments without traffic lights having the highest exposures. Vehicle type and the associated WBV exposures should be considered when purchasing vehicles to be used by full-time professional vehicle operators.

  16. Hopf Bifurcation Characteristics of Dual-Front Axle Self-Excited Shimmy System for Heavy Truck considering Dry Friction

    Directory of Open Access Journals (Sweden)

    Daogao Wei

    2015-01-01

    Full Text Available Multiaxle steering is widely used in commercial vehicles. However, the mechanism of the self-excited shimmy produced by the multiaxle steering system is not clear until now. This study takes a dual-front axle heavy truck as sample vehicle and considers the influences of mid-shift transmission and dry friction to develop a 9 DOF dynamics model based on Lagrange’s equation. Based on the Hopf bifurcation theorem and center manifold theory, the study shows that dual-front axle shimmy is a self-excited vibration produced from Hopf bifurcation. The numerical method is adopted to determine how the size of dry friction torque influences the Hopf bifurcation characteristics of the system and to analyze the speed range of limit cycles and numerical characteristics of the shimmy system. The consistency of results of the qualitative and numerical methods shows that qualitative methods can predict the bifurcation characteristics of shimmy systems. The influences of the main system parameters on the shimmy system are also discussed. Improving the steering transition rod stiffness and dry friction torque and selecting a smaller pneumatic trail and caster angle can reduce the self-excited shimmy, reduce tire wear, and improve the driving stability of vehicles.

  17. Gross congenital malformation at birth in a government hospital

    Directory of Open Access Journals (Sweden)

    Sandeep Sachdeva

    2014-01-01

    Full Text Available A hospital-based cross-sectional study was undertaken to determine proportion of gross congenital malformation (GCMF occurring at intramural births. Rate of GCMF was found to be 16.4/1000 consecutive singleton births (>28 weeks with three leading malformation as anencephaly (44.68%, talipes equinovarus (17.02% and meningomyelocele (10.63%. Higher risk of malformed births were noticed amongst un-booked (2.07% in-comparison to booked (1.01% mothers; women with low level of education (up to 8 years [2.14%] vs. at least 9 years of schooling [0.82%]; gravida status of at least 3 (2.69% followed by 1 (1.43% and 2 (1.0% respectively; pre-term (5.13% vs. term (0.66%; cesarean section (4.36% versus vaginal delivery (0.62%. Mortality was significantly higher among congenitally malformed (17.35% than normal (0.34% newborns. With-in study limitation, emergence of neural tube defect as the single largest category of congenital malformation indicates maternal malnutrition (especially folic acid that needs appropriate attention and management.

  18. Control allocation for for regenerative braking of electric vehicles with an electric motor at the front axle using the state-dependent Riccati equation control technique

    NARCIS (Netherlands)

    Kanarachos, S.A.; Alirezaei, M.; Jansen, S.T.H.; Maurice, J.P.

    2014-01-01

    In this paper the systematic development of an integrated braking controller for a vehicle driven by an electric motor on the front axle is presented. The objective is to engage the electric motor only during braking, up to the point at which the vehicle reaches its manoeuvrability and stability lim

  19. Growth Arrest-Specific 6 Enhances the Suppressive Function of CD4+CD25+ Regulatory T Cells Mainly through Axl Receptor

    Directory of Open Access Journals (Sweden)

    Guang-ju Zhao

    2017-01-01

    Full Text Available Background. Growth arrest-specific (Gas 6 is one of the endogenous ligands of TAM receptors (Tyro3, Axl, and Mertk, and its role as an immune modulator has been recently emphasized. Naturally occurring CD4+CD25+ regulatory T cells (Tregs are essential for the active suppression of autoimmunity. The present study was designed to investigate whether Tregs express TAM receptors and the potential role of Gas6-TAM signal in regulating the suppressive function of Tregs. Methods. The protein and mRNA levels of TAM receptors were determined by using Western blot, immunofluorescence, flow cytometry, and RT-PCR. Then, TAM receptors were silenced using targeted siRNA or blocked with specific antibody. The suppressive function of Tregs was assessed by using a CFSE-based T cell proliferation assay. Flow cytometry was used to determine the expression of Foxp3 and CTLA4 whereas cytokines secretion levels were measured by ELISA assay. Results. Tregs express both Axl and Mertk receptors. Gas6 increases the suppressive function of Tregs in vitro and in mice. Both Foxp3 and CTLA-4 expression on Tregs are enhanced after Gas6 stimulation. Gas6 enhances the suppressive activity of Tregs mainly through Axl receptor. Conclusion. Gas6 has a direct effect on the functions of CD4+CD25+Tregs mainly through its interaction with Axl receptor.

  20. Growth Arrest-Specific 6 Enhances the Suppressive Function of CD4(+)CD25(+) Regulatory T Cells Mainly through Axl Receptor.

    Science.gov (United States)

    Zhao, Guang-Ju; Zheng, Jia-Yi; Bian, Jia-Lan; Chen, Long-Wang; Dong, Ning; Yu, Yan; Hong, Guang-Liang; Chandoo, Arvine; Yao, Yong-Ming; Lu, Zhong-Qiu

    2017-01-01

    Background. Growth arrest-specific (Gas) 6 is one of the endogenous ligands of TAM receptors (Tyro3, Axl, and Mertk), and its role as an immune modulator has been recently emphasized. Naturally occurring CD4(+)CD25(+) regulatory T cells (Tregs) are essential for the active suppression of autoimmunity. The present study was designed to investigate whether Tregs express TAM receptors and the potential role of Gas6-TAM signal in regulating the suppressive function of Tregs. Methods. The protein and mRNA levels of TAM receptors were determined by using Western blot, immunofluorescence, flow cytometry, and RT-PCR. Then, TAM receptors were silenced using targeted siRNA or blocked with specific antibody. The suppressive function of Tregs was assessed by using a CFSE-based T cell proliferation assay. Flow cytometry was used to determine the expression of Foxp3 and CTLA4 whereas cytokines secretion levels were measured by ELISA assay. Results. Tregs express both Axl and Mertk receptors. Gas6 increases the suppressive function of Tregs in vitro and in mice. Both Foxp3 and CTLA-4 expression on Tregs are enhanced after Gas6 stimulation. Gas6 enhances the suppressive activity of Tregs mainly through Axl receptor. Conclusion. Gas6 has a direct effect on the functions of CD4(+)CD25(+)Tregs mainly through its interaction with Axl receptor.

  1. Estimating the gross moist stability in shallow and deep convection

    Science.gov (United States)

    Chen, C. A.; Jong, B. T.; Chou, C.

    2015-12-01

    Gross moist stability has been used to study the link between tropical deep convection and large scale circulation in a moist static energy (MSE) budget. Here we aim to calculate the gross moist stability from more realistic profiles of vertical velocity and extend it beyond deep convection, adding shallow convection. Based on a principal component analysis, we were able to decompose the vertical velocity into two leading modes, which are dominated by deep and shallow convection, respectively. According to the deep and shallow modes, we calculate the gross moist stability for these two modes and discuss the roles of deep and shallow convection in the MSE budget. The gross moist stability of deep convection tends to be positive in the tropics, while that of shallow convection is negative over most areas of the tropics. This implies that deep convection exports MSE to stabilize the atmosphere and shallow convection imports MSE to enhance deep convection and destabilize the atmosphere. Based on the spatial distribution, moisture tends to reduce the gross moist stability of deep convection, while dry static energy has little impact. Deeper deep convection tends to have greater gross moist stability. For shallow convection, on the other hand, the gross moist stability is affected not only by low-level moisture but also mid-level moisture. Both moister low-level and drier mid-level moisture reduce the gross moist stability of shallow convection. Greater low-level dry static energy, which is associated with warmer sea surface temperature, also tends to reduce gross moist stability.

  2. Calculation of gross energy consumption[in a building]; Beregning af bruttoenergiforbrug

    Energy Technology Data Exchange (ETDEWEB)

    Engelund Thomsen, Kirsten; Aggerholm, Soeren

    2000-07-01

    This bulletin presents a method for calculating the gross energy consumption of a building. The net heat demand for space heating, ventilation and domestic hot water should be calculated. Next converted to gross energy consumption, i.e. the amount of energy that is required to supply, for instance, a gas furnace in order that it produces the calculated amount of heat. First the electricity consumption required for ventilation, appliances and lighting is calculated, taking into consideration the daylight utilisation in commercial buildings. The point of departure is the existing method for calculating the net heat demand of buildings. The method includes heat supply from persons, lighting and appliances. This calculating method was later extended to include a method for calculating the energy demand for domestic hot water and addition of non-utilised heat loss from pipes and heat producing installations. This loss is calculated on the basis of loss in hot water tanks, heat and hot water pipes. Heat supply from solar collectors is calculated and deducted from the heat demand. The calculated end result is called gross heat requirement. Next the gross energy consumption for heating, ventilation and domestic hot water is determined by means of annual efficiency for heating installations. An inventory of the environmental impact is calculated based on the energy consumption measured by the total CO{sub 2} production per m{sup 2} floor area. The CO{sub 2} emission is calculated on the basis of the calculated gross energy consumption of heating and electricity, and on standard values for CO{sub 2} contents in the fuels used and emissions from electricity production issued by the Danish Energy Agency. The gross energy consumption is calculated for three examples of buildings: a single-family house, an administration building and a multi-storey building. The examples show that it is feasible to do calculations for typical buildings. Heat consumption for space heating and

  3. 汽车前轴动态特性的可靠性优化设计%Reliability Optimization Design of Dynamic Characteristics of Automotive Front Axle

    Institute of Scientific and Technical Information of China (English)

    臧献国; 于德介; 姚凌云

    2011-01-01

    Combining with the reliability analysis and the optimization technique, a reliability optimization design method was presented for improving the dynamic characteristics of automotive front axle.A reliability optimization model of dynamic characteristics of automotive front axle was established, the first order mode frequency and the velocity admittance of driving point of engine excitation were used as design constraints of reliability—based optimization, the total mass of front axle was used as the design objective.The reliability-based optimization problem of a micro—car front axle was solved, which shows that the dynamic characteristics of front axle are improved and the goals of reliability optimization design are achieved.%将可靠性分析与优化技术相结合,提出一种改善汽车前轴动态特性的可靠性优化设计方法.该方法建立了汽车前轴动态特性的可靠性优化模型,以一阶模态频率和发动机激励点的驱动点速度导纳为动态特性约束,以前轴总质量为优化目标,对前轴进行可靠性优化.对某微车前轴动态特性的可靠性优化设计结果表明,该方法有效酶善了前轴的动态特性,动态特性约束满足了可靠度设计要求,达到了可靠性优化设计的目的.

  4. Clinical anatomy of the subserous layer: An amalgamation of gross and clinical anatomy.

    Science.gov (United States)

    Yabuki, Yoshihiko

    2016-05-01

    The 1998 edition of Terminologia Anatomica introduced some currently used clinical anatomical terms for the pelvic connective tissue or subserous layer. These innovations persuaded the present author to consider a format in which the clinical anatomical terms could be reconciled with those of gross anatomy and incorporated into a single anatomical glossary without contradiction or ambiguity. Specific studies on the subserous layer were undertaken on 79 Japanese women who had undergone surgery for uterine cervical cancer, and on 26 female cadavers that were dissected, 17 being formalin-fixed and 9 fresh. The results were as follows: (a) the subserous layer could be segmentalized by surgical dissection in the perpendicular, horizontal and sagittal planes; (b) the segmentalized subserous layer corresponded to 12 cubes, or ligaments, of minimal dimension that enabled the pelvic organs to be extirpated; (c) each ligament had a three-dimensional (3D) structure comprising craniocaudal, mediolateral, and dorsoventral directions vis-á-vis the pelvic axis; (d) these 3D-structured ligaments were encoded morphologically in order of decreasing length; and (e) using these codes, all the surgical procedures for 19th century to present-day radical hysterectomy could be expressed symbolically. The establishment of clinical anatomical terms, represented symbolically through coding as demonstrated in this article, could provide common ground for amalgamating clinical anatomy with gross anatomy. Consequently, terms in clinical anatomy and gross anatomy could be reconciled and compiled into a single anatomical glossary.

  5. Sectoral contributions to Nigerian gross domestic product using a ...

    African Journals Online (AJOL)

    Global Journal of Pure and Applied Sciences ... This study analyzed sectoral contributions to Gross Domestic Product by Agriculture, Industry and services ... KEYWORDS: Granger causality, Unit root, VAR model and sectoral contribution ...

  6. Ising and Gross-Neveu model in next-to-leading order

    CERN Document Server

    Knorr, Benjamin

    2016-01-01

    We study scalar and chiral fermionic models in next-to-leading order with the help of the functional renormalisation group. Their critical behaviour is of special interest in condensed matter systems, in particular graphene. To derive the beta functions, we make extensive use of computer algebra. The resulting flow equations were solved with pseudo-spectral methods to guarantee high accuracy. New estimates on critical quantities for both the Ising and the Gross-Neveu model are provided. For the Ising model, the estimates agree with earlier renormalisation group studies of the same level of approximation. By contrast, the approximation for the Gross-Neveu model retains many more operators than all earlier studies. For two Dirac fermions, the results agree with both lattice and large-$N_f$ calculations, but for a single flavour, different methods disagree quantitatively, and further studies are necessary.

  7. Premedical anatomy experience and student performance in medical gross anatomy.

    Science.gov (United States)

    Kondrashov, Peter; McDaniel, Dalton J; Jordan, Rebecca M

    2017-04-01

    Gross anatomy is considered one of the most important basic science courses in medical education, yet few medical schools require its completion prior to matriculation. The effect of taking anatomy courses before entering medical school on performance in medical gross anatomy has been previously studied with inconsistent results. The effect of premedical anatomy coursework on performance in medical gross anatomy, overall medical school grade point average (GPA), and Comprehensive Osteopathic Medical Licensing Examination Level 1 (COMLEX 1) score was evaluated in 456 first-year osteopathic medical students along with a survey on its perceived benefits on success in medical gross anatomy course. No significant differences were found in gross anatomy grade, GPA, or COMLEX 1 score between students with premedical anatomy coursework and those without. However, significant differences and higher scores were observed in students who had taken three or more undergraduate anatomy courses including at least one with cadaveric laboratory. There was significantly lower perceived benefit for academic success in the medical gross anatomy course (P<.001) from those students who had taken premedical anatomy courses (5.9 of 10) compared with those who had not (8.2 of 10). Results suggest that requiring any anatomy course as a prerequisite for medical school would not have significant effect on student performance in the medical gross anatomy course. However, requiring more specific anatomy coursework including taking three or more undergraduate anatomy courses, one with cadaveric laboratory component, may result in higher medical gross anatomy grades, medical school GPA, and COMLEX 1 scores. Clin. Anat. 30:303-311, 2017. © 2017 Wiley Periodicals, Inc.

  8. Gross Motor Profile and Its Association with Socialization Skills in Children with Autism Spectrum Disorders

    Directory of Open Access Journals (Sweden)

    Hardiono D. Pusponegoro

    2016-12-01

    Conclusion: Children with ASD had lower gross motor skills compared to typically developing children. Gross motor impairments were found in 20% of the ASD children, and these children also had lower socialization skills than those without gross motor impairments.

  9. Multipurpose optic-electronic autocollimators for measuring deformations of the axle with a millimeter wave range radiotelescope

    Science.gov (United States)

    Konyakhin, Igor; Molev, Fedor; Konyakhin, Alexey; Li, Renpu

    2015-02-01

    The improved autocollimators for measuring angular deformations of the large constructions as support tube of mirror and elevation axle of the radio telescopes are analyzed. Two new types of the reflector for autocollimator are researched. The first type of the reflectors is the tetrahedral reflector with flat reflecting sides and invariant axis. The autocollimator with tetrahedral reflector is used for the measuring 3-D deformations as roll, pitch and yaw angular deviations. The second type of the reflector is the composition of the anamorphic wedge system and ordinary cube-corner retroreflector. This reflector generates the narrow beam, as result the work distance and the range of measurement of the roll angle increase. Technical characteristics of the experimental setups of new reflectors are presented. Features of the tetrahedral reflector and anamorphic system as the reflectors for multipurpose autocollimator are discussed.

  10. Influence of process parameters on the microstructural evolution of a rear axle tube during cross wedge rolling

    Science.gov (United States)

    Ma, Jia-wei; Yang, Cui-ping; Zheng, Zhen-hua; Zhang, Kang-sheng; Ma, Wen-yu

    2016-11-01

    In the shaping process of cross wedge rolling (CWR), metal undergoes a complex microstructural evolution, which affects the quality and mechanical properties of the product. Through secondary development of the DEFORM-3D software, we developed a rigid plastic finite element model for a CWR-processed rear axle tube, coupled with thermomechanical and microstructural aspects of workpieces. Using the developed model, we investigated the microstructural evolution of the CWR process. Also, the influence of numerous parameters, including the initial temperature of workpieces, the roll speed, the forming angle, and the spreading angle, on the grain size and the grain-size uniformity of the rolled workpieces was analyzed. The numerical simulation was verified through rolling and metallographic experiments. Good agreement was obtained between the calculated and experimental results, which demonstrated the reliability of the model constructed in this work.

  11. An integrated control strategy for the composite braking system of an electric vehicle with independently driven axles

    Science.gov (United States)

    Sun, Fengchun; Liu, Wei; He, Hongwen; Guo, Hongqiang

    2016-08-01

    For an electric vehicle with independently driven axles, an integrated braking control strategy was proposed to coordinate the regenerative braking and the hydraulic braking. The integrated strategy includes three modes, namely the hybrid composite mode, the parallel composite mode and the pure hydraulic mode. For the hybrid composite mode and the parallel composite mode, the coefficients of distributing the braking force between the hydraulic braking and the two motors' regenerative braking were optimised offline, and the response surfaces related to the driving state parameters were established. Meanwhile, the six-sigma method was applied to deal with the uncertainty problems for reliability. Additionally, the pure hydraulic mode is activated to ensure the braking safety and stability when the predictive failure of the response surfaces occurs. Experimental results under given braking conditions showed that the braking requirements could be well met with high braking stability and energy regeneration rate, and the reliability of the braking strategy was guaranteed on general braking conditions.

  12. Gross and Histomorphological Studies of Femoral Head Resurfacing in Dog

    Directory of Open Access Journals (Sweden)

    D. Sharifi

    2006-01-01

    Full Text Available The foetal skull bone as a biological graft was investigated. This study was conducted on Fifteen adult mixed - breed normal dogs 12 to 24 months with weighing 21.4=3.6 Kg .Dogs were randomly divided into 3 groups of 5 animals each. The foetal skull bone of 45 days old was collected from one pregnant bitch via cesarean method. The right femoral head cartilage was removed completely in all dogs of 3 groups.. Group I acted as control one, whereas in II group, resurfacing was done by using foetal skull bone which was fixed by using 0.8 mm cerclage wire in criss-cross fashion, but in III group, it was done similar to II group and the hip joint additionally was fixed by using 2 mm steinmenn pin.The clinical observations was made accordingly for 60 days in all groups. The gross changes of femoral head in group I & II were quite smooth and slippy, but in III group were uneven and rough due to secondary changes and ankylosis, but on micropscopic interpertation there was a remarkable compatibility of the graft with femoral head.The reconstruction of articular cartilage was faster in group II and even group III animals than group I animals. There was single row of chondrocyte in scatter area of samples in group . The complete and uniform hyaline cartilage in group II and fibro - cartilage and mixture of connective tissues in group III animals were observed. The results indicated that the foetal skull bone due to its pleuripotent calvarium easily can orient itself into the chondrocytes and cartilagenous tissues in articular surface of the hip joint, if there is suitable enviroment before complete ossification,so that normal joint motion could expect.

  13. Gross Pollutant Traps: Wet Load Assessment at Sungai Kerayong, Malaysia

    Science.gov (United States)

    Mohd Shah, M. R.; Zahari, N. M.; Said, N. F. Md; Sidek, L. M.; Basri, H.; Noor, M. S. F. Md; Husni, M. M. Mohammad; Jajarmizadeh, Milad; Roseli, ZA; Mohd. Dom, N.

    2016-03-01

    The purpose of this project is to carry out assessment on the effectiveness and performance of Gross Pollutant Traps (GPTs) stormwater quality control in the urban areas. The study aims to provide a management and planning tool for effective management of the gross pollutants in the urban areas specifically in River of Life (ROL) project. ROL project is a Malaysian Government initiative under the Economic Transformation Program. One of the program in the greater Klang Valley is to transform Klang River into a vibrant and livable waterfront by the year 2020. The main river in ROL catchment is Sungai Klang (upper catchment), with main tributaries Sungai Gombak, Sungai Batu, Sungai Jinjang, Sungai Keroh, Sungai Bunus, Sungai Ampang and Sungai Kerayong. This paper objective is to study the gross pollutant wet load at Sungai Kerayong 1 and Sungai Kerayong 2 which is located at the downstream location of the ROL project. The result shows that Sungai Kerayong 2 produced higher gross pollutant wet load (8025.33 kg/ha/yr) than Sungai Kerayong 1 (4695.12 kg/ha/yr). This could be due to high contributions amounts of gross pollutant traps from residential area, the degree of develop area, and also the location of the river itself related to climate and rainfall.

  14. Gross efficiency during rowing is not affected by stroke rate.

    Science.gov (United States)

    Hofmijster, Mathijs J; Van Soest, Arthur J; De Koning, Jos J

    2009-05-01

    It has been suggested that the optimal stroke rate in rowing is partly determined by the stroke-rate dependence of internal power losses. This should be reflected in a stroke-rate dependency of gross efficiency (e(gross)). The purpose of this study was to investigate if e(gross) is affected by stroke rate. A second aim was to determine whether internal power losses can be estimated by the negative power output during the stroke cycle (P(negative)). Seventeen well-trained female rowers participated in this study. They rowed three trials on a modified rowing ergometer on slides at a submaximal intensity, with a respiratory exchange ratio of 1 or close to 1. Stroke rates were 28, 34, and 40 strokes per minute. The trials were fully randomized. Power transfer to the flywheel was kept constant whereas e(gross) was determined during each trial. No significant differences in e(gross) were found between conditions. This finding suggests that in rowing internal power losses are not influenced by stroke rate. Furthermore, although P(negative) increased at increasing stroke rate (P measure to estimate internal power losses. This study shows that within the range of stroke rates applied in competitive rowing, internal power losses are unrelated to rowing cycle frequency.

  15. Broken Analysis of Shell Axle Before Bevel Gear Differential%差速器前壳杆的断裂分析

    Institute of Scientific and Technical Information of China (English)

    蔡士祥; 刘胜勇

    2011-01-01

    针对STR桥差速器前壳杆花键部位及其R1.6处易断裂问题,借鉴实心圆轴扭转变形时的横截面应力模型的分析,推导出差速器前壳杆扭矩传递效率的影响因素,并提出相应的改进建议。%There is a broken problem at the spline part and its R1.6 position of the shell axle before STR bevel gear differential.On the basis of analysis about cross-section stress model when solid round shaft is twisted,three factors are drew,which deduce influencing factors to torque-transfer efficiency of the shell axle before STR bevel gear differential,and appropriate improving suggestions are brought forward.

  16. A receptor tyrosine kinase, UFO/Axl, and other genes isolated by a modified differential display PCR are overexpressed in metastatic prostatic carcinoma cell line DU145.

    Science.gov (United States)

    Jacob, A N; Kalapurakal, J; Davidson, W R; Kandpal, G; Dunson, N; Prashar, Y; Kandpal, R P

    1999-01-01

    We have used a modified differential display PCR protocol for isolating 3' restriction fragments of cDNAs specifically expressed or overexpressed in metastatic prostate carcinoma cell line DU145. Several cDNA fragments were identified that matched to milk fat globule protein, UFO/Axl, a receptor tyrosine kinase, human homologue of a Xenopus maternal transcript, laminin and laminin receptor, human carcinoma-associated antigen, and some expressed sequence tags. The transcript for milk fat globule protein, a marker protein shown to be overexpressed in breast tumors, was elevated in DU145 cells. The expression of UFO/Axl, a receptor tyrosine kinase, was considerably higher in DU145 cells as compared to normal prostate cells and prostatic carcinoma cell line PC-3. The overexpression of UFO oncogene in DU145 cells is discussed in the context of prostate cancer metastasis.

  17. 有限元分析在汽车后桥壳设计中的应用%Finite element analysis in the design of automotive Rear axle

    Institute of Scientific and Technical Information of China (English)

    黄在璐

    2012-01-01

      运用软件Solidworks建立汽车后桥壳的三维模型,并利用有限元分析软件COSMOSWorks对该后桥壳进行静态受力分析,获取该零件的应力分布云图,从而为零件的合理设计提供有价值的参考。%  In this paper, the three-dimensional model of the software Solidworks to automotive rear axle,and use of finite element analysis software COSMOSWorks the rear axle for static stress analysis,Get the part of the stress contours,Provide a valuable reference for the rational design of parts.

  18. Gross municipal product: the design procedure and application

    Directory of Open Access Journals (Sweden)

    Dmitry Vasilevich Kolechkov

    2012-12-01

    Full Text Available The article is devoted to the actual problem to find the adequate methods to assess the economic performance of municipalities conditioned by their growing independence and role in the development of regional economy. Nowadays many researchers are working on the practical application and testing of various approaches to assessing theterritory economicresults based on thecalculation of gross municipal product (GМP. However, the development of methodological reasonable calculation tools is still at an early stage. In this article presents a simplified method of calculating the gross municipal product, an analysis of the dynamics and territorialindustrial structure GМP, implemented in terms of grouping areas GМP methods hierarchical cluster analysis of the economic characteristics of the obtained clustersbased on systematic occurring in the economic literature, methodological developments in the calculation of gross municipal product, determination of strengths and weaknesses of different methodological approaches

  19. Anatomy of the Gross Intestine of the Capybara (Hydrochoerus Hydrochaeris

    Directory of Open Access Journals (Sweden)

    Noelia Vazquez

    2012-01-01

    Full Text Available Problem statement: The anatomy of the gross intestine and its mesentery of the capybara (Hydrochoerus hydrochaeris have not been described completely. Approach: In the present study, eight adult capybaras were studied using gross dissection. Results: The cecum was the largest part of the intestine and was divided into base, body and apex. The cecocolic fold joined the cecum to the full extent of the proximal loop of ascending colon. The ascending colon was divided into two ansae, one proximal and one distal or spiral. The distal ansa had a spiral arrangement and was placed cranially to the right, covered ventrally by the apex of the cecum. This ansa had a centripetal gyrus to the left, a central flexure and a centrifugal gyrus turning to the right that was continuous with the transverse colon in the right colic flexure. Conclusion: The gross intestine of the capybara was different to other previously studied rodents.

  20. Potato production in Europe - a gross margin analysis

    DEFF Research Database (Denmark)

    Pedersen, Søren Marcus; Bizik, Jan; Costa, Luisa Dalla;

    The purpose of this paper is to examine different cropping practices, cost structures and gross margins for producing conventional table potatoes in 6 different regions within the European Union: Czech Republic, Denmark, Italy, Poland, Portugal and Slovakia. Findings from this study show that pot......The purpose of this paper is to examine different cropping practices, cost structures and gross margins for producing conventional table potatoes in 6 different regions within the European Union: Czech Republic, Denmark, Italy, Poland, Portugal and Slovakia. Findings from this study show...... that potato cropping practices varies signifi-cantly between these countries with major differences in yields and costs. Italy and Denmark are the two regions with highest gross margins due to high yields and reve-nues. Poland is by far the largest potato producing country among the 6 countries ex...

  1. A survey of gross alpha and gross beta activity in soil samples in Kinta District, Perak, Malaysia.

    Science.gov (United States)

    Lee, Siak Kuan; Wagiran, Husin; Ramli, Ahmad Termizi

    2014-12-01

    The objective of this study was to determine the gross alpha and gross beta activity concentrations from the different soil types found in the Kinta District, Perak, Malaysia. A total of 128 soil samples were collected and their dose rates were measured 1 m above the ground. Gross alpha and gross beta activity measurements were carried out using gas flow proportional counter, Tennelec Series 5 LB5500 Automatic Low Background Counting System. The alpha activity concentration ranged from 15 to 9634 Bq kg(-1) with a mean value of 1558±121 Bq kg(-1). The beta activity concentration ranged from 142 to 6173 Bq kg(-1) with a mean value of 1112±32 Bq kg(-1). High alpha and beta activity concentrations are from the same soil type. The results of the analysis show a strong correlation between the gross alpha activity concentration and dose rate (R = 0.92). The data obtained can be used as a database for each soil type.

  2. Ludwik Gross, Sarah Stewart, and the 1950s discoveries of Gross murine leukemia virus and polyoma virus.

    Science.gov (United States)

    Morgan, Gregory J

    2014-12-01

    The Polish-American scientist Ludwik Gross made two important discoveries in the early 1950s. He showed that two viruses - murine leukemia virus and parotid tumor virus - could cause cancer when they were injected into susceptible animals. At first, Gross's discoveries were greeted with skepticism: it seemed implausible that viruses could cause a disease as complex as cancer. Inspired by Gross's initial experiments, similar results were obtained by Sarah Stewart and Bernice Eddy who later renamed the parotid tumor virus SE polyoma virus after finding it could cause many different types of tumors in mice, hamsters, and rats. Eventually the "SE" was dropped and virologists adopted the name "polyoma virus." After Gross's work was published, additional viruses capable of causing solid tumors or blood-borne tumors in mice were described by Arnold Graffi, Charlotte Friend, John Moloney and others. By 1961, sufficient data had been accumulated for Gross to confidently publish an extensive monograph--Oncogenic Viruses--the first history of tumor virology, which became a standard reference work and marked the emergence of tumor virology as a distinct, legitimate field of study. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Transcriptional activation of the Axl and PDGFR-α by c-Met through a ras- and Src-independent mechanism in human bladder cancer

    Directory of Open Access Journals (Sweden)

    Tseng Vincent S

    2011-04-01

    Full Text Available Abstract Background A cross-talk between different receptor tyrosine kinases (RTKs plays an important role in the pathogenesis of human cancers. Methods Both NIH-Met5 and T24-Met3 cell lines harboring an inducible human c-Met gene were established. C-Met-related RTKs were screened by RTK microarray analysis. The cross-talk of RTKs was demonstrated by Western blotting and confirmed by small interfering RNA (siRNA silencing, followed by elucidation of the underlying mechanism. The impact of this cross-talk on biological function was demonstrated by Trans-well migration assay. Finally, the potential clinical importance was examined in a cohort of 65 cases of locally advanced and metastatic bladder cancer patients. Results A positive association of Axl or platelet-derived growth factor receptor-alpha (PDGFR-α with c-Met expression was demonstrated at translational level, and confirmed by specific siRNA knock-down. The transactivation of c-Met on Axl or PDGFR-α in vitro was through a ras- and Src-independent activation of mitogen-activated protein kinase/extracellular signal-regulated kinase (MEK/ERK pathway. In human bladder cancer, co-expression of these RTKs was associated with poor patient survival (p p Conclusions In addition to c-Met, the cross-talk with Axl and/or PDGFR-α also contributes to the progression of human bladder cancer. Evaluation of Axl and PDGFR-α expression status may identify a subset of c-Met-positive bladder cancer patients who may require co-targeting therapy.

  4. Design the Rocker Arm Mechanism in Double Front Axle Steering Mechanism%双前桥转向机构中摇臂机构的设计

    Institute of Scientific and Technical Information of China (English)

    刘兰兰; 王健楠

    2012-01-01

    为了适当调整摇臂机构的设计参数,根据已有的基本型双前桥转向的摇臂机构.用作图法计算出二桥节臂转角肛,再计算出二桥节臂理论转角β2理,根据β2-β2理=δ古是否小于1°来判断该机构是否合理:如不合理,通过改变摇臂长度R的尺寸得到合理的数值后,再用三维模型进行了校核,得到了合适的设计数据。此方法缩短了设计周期,为双摇臂机构的设计提供了参考。%Abstract according the existing rocker mechanism about the double front axle steering mechanism, the comer of the knuckle arm about the second steering axle β2 was calculated from the comer of knuckle arm about the first steering axle r, by graphical method, and the theory comer of knuckle arm of the second steering axle β2L, was counted, then the rocker mechanism's rationality was determined according the formula β2- β2L=δ;if δ≤ 1°,the mechanism is reasonable ;if δ 〉 1°,then the parameter R was changed to obtain the reasonable data about the rocker mechanism ;final, the corresponding 3D model was build to check the design. Design time was saved by this method, and reference was given to the other designers.

  5. Numerical simulation for the Gross-Pitaevskii equation based on the lattice Boltzmann method

    Science.gov (United States)

    Wang, Huimin

    2017-09-01

    A lattice Boltzmann model for the Gross-Pitaevskii equation is proposed in this paper. Some numerical tests for one- and two-dimensional Gross-Pitaevskii equation have been conducted. The waves of the Gross-Pitaevskii equation are simulated. Numerical results show that the lattice Boltzmann method is an effective method for the wave of the Gross-Pitaevskii equation.

  6. 29 CFR 779.259 - What is included in annual gross volume.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false What is included in annual gross volume. 779.259 Section... Coverage Annual Gross Volume of Sales Made Or Business Done § 779.259 What is included in annual gross volume. (a) The annual gross volume of sales made or business done of an enterprise consists of its...

  7. 29 CFR 794.122 - Ascertainment of “annual” gross sales volume.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Ascertainment of âannualâ gross sales volume. 794.122... Annual Gross Volume of Sales § 794.122 Ascertainment of “annual” gross sales volume. The annual gross volume of sales of an enterprise engaged in the wholesale or bulk distribution of petroleum...

  8. Phase Diagram of the Gross-Neveu Model: Exact Results and Condensed Matter Precursors

    CERN Document Server

    Schnetz, O; Urlichs, K; Schnetz, Oliver; Thies, Michael; Urlichs, Konrad

    2004-01-01

    Recently the revised phase diagram of the (large N) Gross-Neveu model in 1+1 dimensions with discrete chiral symmetry has been determined numerically. It features three phases, a massless and a massive Fermi gas and a kink-antikink crystal. Here we investigate the phase diagram by analytical means, mapping the Dirac-Hartree-Fock equation onto the non-relativistic Schroedinger equation with the (single gap) Lame potential. It is pointed out that mathematically identical phase diagrams appeared in the condensed matter literature some time ago in the context of the Peierls-Froehlich model and ferromagnetic superconductors.

  9. The Impact of Investments and Gross Value Added upon Earnings

    Directory of Open Access Journals (Sweden)

    Larisa APARASCHIVEI

    2011-02-01

    Full Text Available In this paper we tried to capture the impact of investments and gross value added, but also the impact of the employment on the average wage. The analysis refers to the period 1998- 2008 and we are using data on the activities of the Romanian economy. The results of this study confirm the negative influence of the employment, being consistent with the theory. Also, the impact of investments and that of gross value added came out to be positive and significant.

  10. Revised Phase Diagram of the Gross-Neveu Model

    CERN Document Server

    Thies, M; Thies, Michael; Urlichs, Konrad

    2003-01-01

    We confirm earlier hints that the conventional phase diagram of the discrete chiral Gross-Neveu model in the large N limit is deficient at non-zero chemical potential. We present the corrected phase diagram constructed in mean field theory. It has three different phases, including a kink-antikink crystal phase. All transitions are second order. The driving mechanism for the new structure of baryonic matter in the Gross-Neveu model is an Overhauser type instability with gap formation at the Fermi surface.

  11. 快速换模在桥壳模具中的应用%SMED application in the axle housing mold

    Institute of Scientific and Technical Information of China (English)

    雷鹏; 贾雄伟; 惠文强

    2014-01-01

    In stamping-welding axle housings products switched, the axle housing mold bulky and heavy-tonnage, resulting in retooling slow and low productivity. Through the SMED application in the axle housings, the distinction between internal and external, transformation operation using a parallel operation. Improving the logistics set up hanging device, increasing the positioning pin. The changeover speed increase more than 50%, reducing the extra inventory, improve production efficiency, resulting in significant economic benefits.%在冲焊桥壳产品切换中,桥壳模具体积大、吨位重、造成换模速度慢,生产效率低。通过快速换模技术在桥壳模具中的应用,区分了内外变换操作,并采用平行作业,改善物流架起吊装置,增加定位销,使换模速度提升了50%以上,减少了不需的额外库存,提高了生产效率,并产生明显的经济效益。

  12. Monitoring of gross alpha, gross beta and actinides activities in exhaust air released from the waste isolation pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    Thakur, P., E-mail: pthakur@cemrc.org [Carlsbad Environmental Monitoring and Research Center, 1400 University Drive, Carlsbad, New Mexico 88220 (United States); Mulholland, G.P. [Carlsbad Environmental Monitoring and Research Center, 1400 University Drive, Carlsbad, New Mexico 88220 (United States)

    2011-09-15

    The simultaneous measurements of gross alpha and beta activities is one of the simplest radioanalytical technique used as a method for screening samples of both high and low activities of alpha and beta emitting radionuclides in environmental and bioassay samples. Such measurements are of great interest from both a radiological, waste disposal viewpoint, and to establish a trend of radioactivity based on long term monitoring. At the WIPP (Waste Isolation Pilot Plant) site, unfiltered exhaust air from the underground repository is the most important effluent. As part of its monitoring program, the particulates from WIPP exhaust air are collected everyday at a location typically called the Fixed Air Sampler (FAS) site or Station A, this site is located at the release point for aerosol effluents from the underground to the environment. The measurements of gross alpha and beta activity on air filter samples were performed using an ultra low level counter, PIC-MPC 9604-{alpha}/{beta}, from Protean Instrument Corporation. The high sensitivity of the gross alpha and beta instrument enables detection of low value activity from the air filters. In 2009, the values of gross alpha and beta activity concentrations ranged from Simultaneous measurements of gross alpha and gross beta activities in the particulates from WIPP exhaust air were performed. > Ultra low level counter, PIC-MPC 9604-{alpha}/{beta} counter was used for the measurements. > Values of gross alpha activity concentrations ranged from Values of gross beta activity concentrations ranged from

  13. Gross-fragmentation of meteoroids and bulk density of Geminids from photographic fireball records

    Science.gov (United States)

    Ceplecha, Zdenek; Mccrosky, R. E.

    1992-01-01

    The explicit solution of the drag and ablation equations of a single nonfragmenting meteoroid moving in any actual atmosphere was published several years ago. The solution yields the theoretical relation of l, the distance flown by the meteoroid in its trajectory, as a function of time, t, assuming that the height, h, is a known function of l. The photographic records of meteors and fireballs are coded by time marks, using a rotating shutter or a similar device to break the moving image. Time is, thus, the independent variable and for each time mark on a meteoroid trajector, the observed distance along the trajectory, l sub obs, as well as the double- or multiple- station photographs of the same meteoroid. Applying this solution to all available Prairie Network (PN) fireball-records, we recognized that the majority of them gave good solutions with standard deviations somewhat bigger than the intrinsic geometrical precision of the data. We also noticed that, on an average, previous methods of evaluation of the meteoroid velocities (interpolation polynomials, numerical differenciation of the observed l sub obs) used up to only several tens of percent of the intrinsic precision of the PN observational data. When residuals of these solutions, i.e. l sub obs - l sub com, were represented as a function of time for about 75 percent of solutions. The remaining 25 percent of residuals showed systematic changes with time exceeding one standard deviation. We tried to explain these systematic time course of residuals by using different meteoroids first computed theoretically and then analyzed by the same model as the natural PN fireballs were. The conclusion of these model computations is that systematic time changes of residuals in the nonfragmenting model exceeding one standard of deviation are caused by sudden gross fragmentation at one or more trajectory points. Thus, we generalized the explicit solution of the drag and ablation equations of a single nonfragmenting

  14. 26 CFR 1.555-2 - Additions to gross income.

    Science.gov (United States)

    2010-04-01

    ... Corporation sells 90percent of its stock in the Y Corporation and thus is a minority shareholder in the Y... on which the required United States group exists, and (2) Such foreign corporation is a shareholder... the gross income of its shareholders, whether United States shareholders or other foreign...

  15. Comments on the research article by Gross et al. (2012)

    DEFF Research Database (Denmark)

    Guntur, Srinivas; Sørensen, Niels N.

    2014-01-01

    The purpose of this Letter to the Editor is to present a discussion on the physics of rotational augmentation based on existing work. One of the latest works by Gross et al. (2012) is highlighted here, and its conclusions are discussed. Based on the existing understanding of rotational augmentati...

  16. Effective Collaboration among the Gross Motor Assessment Team Members

    Science.gov (United States)

    Menear, Kristi S.; Davis, Timothy D.

    2015-01-01

    This article describes the gross motor assessment team (GMAT) members' roles and collaborative approach to making appropriate decisions and modifications when addressing the needs of individuals with disabilities in physical education. Case studies of students are used to demonstrate effective uses of the GMAT. The primary outcome of the GMAT's…

  17. 40 CFR 403.15 - Net/Gross calculation.

    Science.gov (United States)

    2010-07-01

    ... STANDARDS GENERAL PRE-TREAT-MENT REGULATIONS FOR EXIST-ING AND NEW SOURCES OF POLLUTION § 403.15 Net/Gross... pollutants in the Industrial User's intake water in accordance with this section. Any Industrial User wishing... of the Industrial User, the applicable Standard will be calculated on a “net” basis (i.e., adjusted...

  18. Rubriek 'Meten in de praktijk': Gross Motor Function Measure.

    NARCIS (Netherlands)

    Veenhof, C.; Ketelaar, M.

    2004-01-01

    De Gross Motor Function Measure (GMFM) is een instrument dat de grof-motorische vaardigheden meet van kinderen met cerebrale parese. De GMFM is expliciet ontwikkeld als evaluatief meetinstrument, wat betekent dat het bedoeld is om veranderingen over de tijd of verandering en die optreden na behandel

  19. Development of the Gross Motor Function Classification System (1997)

    Science.gov (United States)

    Morris, Christopher

    2008-01-01

    To address the need for a standardized system to classify the gross motor function of children with cerebral palsy, the authors developed a five-level classification system analogous to the staging and grading systems used in medicine. Nominal group process and Delphi survey consensus methods were used to examine content validity and revise the…

  20. Effective Collaboration among the Gross Motor Assessment Team Members

    Science.gov (United States)

    Menear, Kristi S.; Davis, Timothy D.

    2015-01-01

    This article describes the gross motor assessment team (GMAT) members' roles and collaborative approach to making appropriate decisions and modifications when addressing the needs of individuals with disabilities in physical education. Case studies of students are used to demonstrate effective uses of the GMAT. The primary outcome of the GMAT's…

  1. Assessing Gross Motor Skills of Kosovar Preschool Children

    Science.gov (United States)

    Shala, Merita

    2009-01-01

    In the light of the new developments in preschool education in Kosovo, this study attempts to carry out an assessment of the development of gross motor skills of preschool children attending institutional education. The emphasis is on creating a set of tests to measure the motor attainments of these children by conducting assessments of the…

  2. 78 FR 26575 - Gross Combination Weight Rating; Definition

    Science.gov (United States)

    2013-05-07

    ... Weight Rating; Definition AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION... definition of ``gross combination weight rating'' (or GCWR) to clarify that a GCWR is the greater of: the....regulations.gov . Fax: 1-202-493-2251. Mail: Docket Management Facility (M-30), U.S. Department of...

  3. 77 FR 51706 - Gross Combination Weight Rating (GCWR); Definition

    Science.gov (United States)

    2012-08-27

    ... Federal Motor Carrier Safety Administration 49 CFR Parts 383 and 390 RIN 2126-AB53 Gross Combination Weight Rating (GCWR); Definition AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Direct final rule; request for comments. SUMMARY: The Federal Motor Carrier Safety Administration...

  4. Strategic improvements for gross anatomy web-based teaching.

    Science.gov (United States)

    Marker, David R; Juluru, Krishna; Long, Chris; Magid, Donna

    2012-01-01

    Current generations of graduate students have been immersed in technology from their early school years and have high expectations regarding digital resources. To better meet the expectations of Gross Anatomy students at our institution, electronic radiology teaching files for first-year coursework were organized into a web site. The web site was custom designed to provide material that directly correlated to the Gross Anatomy dissection and lectures. Quick links provided sets of images grouped by anatomic location. Additionally, Lab and Study Companions provided specific material for the students to review prior to and after lectures and gross dissections. Student opinions of this education resource were compared to student opinions of the prior year's digital teaching files. The new content was ranked as more user friendly (3.1 points versus 2.3 points) and more useful for learning anatomy (3.3 points versus 2.6 points). Many students reported that using the web portal was critical in helping them to better understand relationships of anatomical structures. These findings suggest that a well-organized web portal can provide a user-friendly, valuable educational resource for medical students who are studying Gross Anatomy.

  5. Fine and Gross Motor Ability in Males with ADHD

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2003-09-01

    Full Text Available Both fine and gross motor abilities were evaluated in 10-year-old males with attention deficit hyperactivity disorder (ADHD and compared to a group of control children at the School of Psychology, Curtin University of Technology, Perth, Australia.

  6. Construction of 2-dimensional Grosse-Wulkenhaar Model

    CERN Document Server

    Wang, Zhituo

    2011-01-01

    In this paper we construct the noncommutative Grosse-Wulkenhaar model on 2-dimensional Moyal plane with the method of loop vertex expansion. We treat renormalization with this new tool, adapt Nelson's argument and prove Borel summability of the perturbation series. This is the first non-commutative quantum field theory model to be built in a non-perturbative sense.

  7. Monopol suretab kohaliku loomakasvataja / Oleg Gross ; interv . Illar Mõttus

    Index Scriptorium Estoniae

    Gross, Oleg, 1952-

    2005-01-01

    Väike-Maarja jäätmetehase monopoolse seisundi vastu sõna võtnud OG Elektra omanik Oleg Gross on kindel, et jäätmetehasega suretatakse kohalikud väiksemad lihatootjad välja. Kommenteerivad talupidaja Jüri Järvet ja Rakvere Lihakombinaadi direktor Olle Horm

  8. ɛ-expansion in the Gross-Neveu

    Science.gov (United States)

    Raju, Avinash

    2016-10-01

    We use the recently developed CFT techniques of Rychkov and Tan to compute anomalous dimensions in the O( N ) Gross-Neveu model in d = 2 + ɛ dimensions. To do this, we extend the "cowpie contraction" algorithm of arXiv:1506.06616 to theories with fermions. Our results match perfectly with Feynman diagram computations.

  9. Barn music at St Donat's castle / Philip Gross

    Index Scriptorium Estoniae

    Gross, Philip, 1952-

    2011-01-01

    Muusikafestivalist "Vale of Glamorgan", mis oli 2010. a. pühendatud Arvo Pärdile. Eesti kammermuusikaansambli Resonabilis kavas oli ka festivali tellimusel valminud uelsi helilooja Gareth Peredur Churchilli "Vocable", mille teksti kirjutas Philip Gross. Festivalikontsertide muljeid leiab Grossi luuletsüklis "Barn music" (avaldatud samas ajakirjanumbris, lk. 42-43)

  10. Attitudes of Healthcare Students on Gross Anatomy Laboratory Sessions

    Science.gov (United States)

    Kawashiro, Yukiko; Anahara, Reiko; Kohno, Toshihiko; Mori, Chisato; Matsuno, Yoshiharu

    2009-01-01

    At Chiba University, gross anatomy laboratory sessions ("laboratories") are required for physical therapy students. Though most physical therapy schools require their students to participate in laboratories so that they will better understand the structure of the human body, few data exist on the value of these laboratories specifically…

  11. Uniqueness of Meromorphic Functions and Question of Gross

    Institute of Scientific and Technical Information of China (English)

    仪洪勋

    1994-01-01

    In this paper, we deal with the problem of uniqueness of meromorphic functions. It is shown that there exist two finite sets Sj (j=1, 2) such that any two nonconstant meromorphic functions f and g satisfying Ef(Sj)=Eg(Sj) for j = 1,2 must be identical, which answers a question posed by Gross.

  12. Interlimb Coordination: An Important Facet of Gross-Motor Ability

    Science.gov (United States)

    Bobbio, Tatiana; Gabbard, Carl; Cacola, Priscila

    2009-01-01

    Motor development attains landmark significance during early childhood. Although early childhood educators may be familiar with the gross-motor skill category, the subcategory of interlimb coordination needs greater attention than it typically receives from teachers of young children. Interlimb coordination primarily involves movements requiring…

  13. Barn music at St Donat's castle / Philip Gross

    Index Scriptorium Estoniae

    Gross, Philip, 1952-

    2011-01-01

    Muusikafestivalist "Vale of Glamorgan", mis oli 2010. a. pühendatud Arvo Pärdile. Eesti kammermuusikaansambli Resonabilis kavas oli ka festivali tellimusel valminud uelsi helilooja Gareth Peredur Churchilli "Vocable", mille teksti kirjutas Philip Gross. Festivalikontsertide muljeid leiab Grossi luuletsüklis "Barn music" (avaldatud samas ajakirjanumbris, lk. 42-43)

  14. 75 FR 15610 - Exclusions From Gross Income of Foreign Corporations

    Science.gov (United States)

    2010-03-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 Exclusions From Gross Income of Foreign Corporations CFR Correction In Title 26 of the Code of Federal Regulations, Part 1 (Sec. Sec. 1.851 to 1.907), revised as...

  15. Gross Motor Development, Movement Abnormalities, and Early Identification of Autism

    Science.gov (United States)

    Ozonoff, Sally; Young, Gregory S.; Goldring, Stacy; Greiss-Hess, Laura; Herrera, Adriana M.; Steele, Joel; Macari, Suzanne; Hepburn, Susan; Rogers, Sally J.

    2008-01-01

    Gross motor development (supine, prone, rolling, sitting, crawling, walking) and movement abnormalities were examined in the home videos of infants later diagnosed with autism (regression and no regression subgroups), developmental delays (DD), or typical development. Group differences in maturity were found for walking, prone, and supine, with…

  16. Outcomes of a Rotational Dissection System in Gross Anatomy

    Science.gov (United States)

    Marshak, David W.; Oakes, Joanne; Hsieh, Pei-Hsuan; Chuang, Alice Z.; Cleary, Leonard J.

    2015-01-01

    At the University of Texas Houston Medical School, a rotational dissection system was introduced to improve coordination between the Gross Anatomy and the Introduction to Clinical Medicine (ICM) courses. Six students were assigned to each cadaver and divided into two teams. For each laboratory, one team was assigned to dissect and the other to…

  17. Strategic Improvements for Gross Anatomy Web-Based Teaching

    Directory of Open Access Journals (Sweden)

    David R. Marker

    2012-01-01

    Full Text Available Current generations of graduate students have been immersed in technology from their early school years and have high expectations regarding digital resources. To better meet the expectations of Gross Anatomy students at our institution, electronic radiology teaching files for first-year coursework were organized into a web site. The web site was custom designed to provide material that directly correlated to the Gross Anatomy dissection and lectures. Quick links provided sets of images grouped by anatomic location. Additionally, Lab and Study Companions provided specific material for the students to review prior to and after lectures and gross dissections. Student opinions of this education resource were compared to student opinions of the prior year’s digital teaching files. The new content was ranked as more user friendly (3.1 points versus 2.3 points and more useful for learning anatomy (3.3 points versus 2.6 points. Many students reported that using the web portal was critical in helping them to better understand relationships of anatomical structures. These findings suggest that a well-organized web portal can provide a user-friendly, valuable educational resource for medical students who are studying Gross Anatomy.

  18. 驱动桥桥壳建模及模型网格化处理%Modeling the Drive axle housing and Meshing the model

    Institute of Scientific and Technical Information of China (English)

    肖焱曦; 赵冰; 史培龙; 张建; 常海雷

    2012-01-01

    Driving axle shell is one of the main parts on cars.It is not only the load bearing part,the transmising force and torque part but also is the main reducer,differential and wheel transmission device shell.So the quality of driving axle shell greatly affect the safe use of vehicles. Along with the economical development and the increasing vehicle possession,vehicles are developing to high-speed,continuous lightweight,low energy consumption and high performance.This requires that axle housing not only has enough intensity and rigidity,also requires mass has been reduced to structure and the vibration characteristic must be analysed.This paper mainly research on how to use the Hypermesh meshing the model which is modeled by pro-E after simplifying the drive axle housing,and check the mesher and modify the mesher the meaning of this paper is to provide a foundation model to finite element analysis of drive axle housing.%驱动桥壳是汽车上的主要零件之一,桥壳不仅是承载件还是传力件,同时又是主减速器、差速器及车轮传动装置的外壳。故驱动桥壳的质量极大影响了车辆的安全使用。随着经济发展,车辆保有量的日益增长,车辆不断向高速、轻量、低能耗和高性能发展。这要求桥壳不仅有足够的强度和刚度,还要求减轻质量以及必须对结构的振动特性分析。本文主要研究在对驱动桥壳简化及通过PROE建模后,如何在Hypermesh把模型网格化及对网格的修改和检查,本文的意义在于对驱动桥壳的有限元分析提供一个基础模型。

  19. The Effect of Flexible Pavement Mechanics on the Accuracy of Axle Load Sensors in Vehicle Weigh-in-Motion Systems.

    Science.gov (United States)

    Burnos, Piotr; Rys, Dawid

    2017-09-07

    Weigh-in-Motion systems are tools to prevent road pavements from the adverse phenomena of vehicle overloading. However, the effectiveness of these systems can be significantly increased by improving weighing accuracy, which is now insufficient for direct enforcement of overloaded vehicles. Field tests show that the accuracy of Weigh-in-Motion axle load sensors installed in the flexible (asphalt) pavements depends on pavement temperature and vehicle speeds. Although this is a known phenomenon, it has not been explained yet. The aim of our study is to fill this gap in the knowledge. The explanation of this phenomena which is presented in the paper is based on pavement/sensors mechanics and the application of the multilayer elastic half-space theory. We show that differences in the distribution of vertical and horizontal stresses in the pavement structure are the cause of vehicle weight measurement errors. These studies are important in terms of Weigh-in-Motion systems for direct enforcement and will help to improve the weighing results accuracy.

  20. Cost-benefit analysis of the construction of different flexible pavement structures considering the axle load and type of binder

    Directory of Open Access Journals (Sweden)

    Lucas Dotto Bueno

    2016-08-01

    Full Text Available The status of Brazilian highways reflects a deficient pavement performance when they are subjected to loadings imposed by heavy traffic. Current legislation, as enacted by Contran (National Traffic Council, has increased the axle weight limit for cargo vehicles by up to 10%. Therefore, the aim of this study was to determine a cost-benefit ratio by using different types of structures, asphalt binders and load intensities. Typical pavements were determined and then analyzed by the software AEMC (SisPav to obtain the horizontal tensile strain (εt values at the bottom of the asphalt concrete layer and, later, the NFATIGUE value. It was found that the increase in weight, within values covered by legislation, might result in a reduction of approximately 50% in the NFATIGUE value for the pavement structures analyzed. As for economic impact, the same weight increase caused a mean increase of 120% in the cost of repeated loading on pavement structures (R$ NFATIGUE-1. It was also observed that structures with more robust asphalt concrete layers can provide the best R$ NFATIGUE-1 ratios. The best results for granular materials were found with thinner layers, associated with a thicker coating. The benefits of modified binders were shown by the analyses of the best structural options: both the polymer-modified binder and the rubber asphalt binder offer significant structural and economic improvements to the structure.

  1. Effect of the load of drive axles and high of the curtain on stress-strain properties of the tractor

    Directory of Open Access Journals (Sweden)

    Tomáš Šmerda

    2007-01-01

    Full Text Available The goal of the experimental measurement was determination of relation among weight load of the tractor together, hitch height changes and drawbar characteristic. The measurement was realized on chassis dynamometer at MUAF in Brno. The first step consisted of rated speed characteristics measurement in conformity with OECD demands. The drawbar characteristic was measured under two selected gears. Adding 980 kg to the nominal wight of the tractor brought increasing maximal drawbar power and drawbar force together with decreasing of slip. The highest differences were observed during the mesurement of fifth gear shifted. The drawbar force grew up to 18.9% as well as the maximal drawbar power (15.2%. The maximal drawbar power at ninth gear gave 62.8 kW. The hitch height was setting to 0.54 m; 0.64 m and 0.74 m. When the hitch height was set from 0.54 m to 0.74 m the drawbar force an power on front axle was lower by reason of load reduction. As can be noticed from the final drawbar characteristics, both curves are identical up to border of maximal drawbar power. Small differences in the area of the highest slips can be ascribed to the rolling resistance.

  2. Gross, Histologic, and Computed Tomographic Anatomy of the Lacrimal System of Snakes

    Science.gov (United States)

    Souza, Nicole M.; Maggs, David J.; Park, Shin Ae; Puchalski, Sarah; Reilly, Christopher M.; Paul-Murphy, Joanne; Murphy, Christopher J.

    2014-01-01

    Objective To describe the lacrimal system of snakes using contrast micro-computed tomography (micro-CT) with 3-dimensional reconstruction, fluorescein passage (“Jones”) testing, histology, and gross dissection. Animals studied One Royal Python and 19 snake cadavers representing 10 species. Procedures Direct observation following injection of fluorescein into the subspectacular space, micro-CT following injection of 3 contrast agents into the subspectacular space, gross dissection following injection of latex into the subspectacular space, and histopathology. Results Injection of fluorescein confirmed patency but not course of the lacrimal duct. Barium enabled clear visualization of the lacrimal duct whereas two iodinated contrast agents proved inadequate. Collectively, micro-CT, anatomic dissections, and histology suggest tears are produced by a single, large, serous, retrobulbar gland, released into the subspectacular space via several ductules, and drained through a single punctum originating in the ventronasal subspectacular space and the lacrimal duct taking one of 3 routes of variable tortuosity before opening into the oral cavity in close association with the opening of the duct of the vomeronasal organ. Conclusions The ophidian lacrimal duct has a generally tortuous course and the details of its anatomy is species variable. The tortuous course of the duct likely predisposes snakes to duct occlusion and must be considered when planning medical and surgical interventions in snakes with pseudobuphthalmos and subspectacular abscessation. PMID:24862081

  3. Gross, histologic, and micro-computed tomographic anatomy of the lacrimal system of snakes.

    Science.gov (United States)

    Souza, Nicole M; Maggs, David J; Park, Shin Ae; Puchalski, Sarah M; Reilly, Christopher M; Paul-Murphy, Joanne; Murphy, Christopher J

    2015-01-01

    To describe the lacrimal system of snakes using contrast micro-computed tomography (micro-CT) with 3-dimensional reconstruction, fluorescein passage ('Jones') testing, histology, and gross dissection. One royal python and 19 snake cadavers representing 10 species. Direct observation following injection of fluorescein into the subspectacular space, micro-CT following injection of three contrast agents into the subspectacular space, gross dissection following injection of latex into the subspectacular space, and histopathology. Injection of fluorescein confirmed patency, but not course of the lacrimal duct. Barium enabled clear visualization of the lacrimal duct, whereas two iodinated contrast agents proved inadequate. Collectively, micro-CT, anatomic dissections, and histology suggest tears are produced by a single, large, serous, retrobulbar gland, released into the subspectacular space via several ductules, and drained through a single punctum originating in the ventronasal subspectacular space, and the lacrimal duct, which takes one of three routes of variable tortuosity before opening into the oral cavity in close association with the opening of the duct of the vomeronasal organ. The ophidian lacrimal duct has a generally tortuous course, and the details of its anatomy are species-variable. The tortuous course of the duct likely predisposes snakes to duct occlusion and must be considered when planning medical and surgical interventions in snakes with pseudobuphthalmos and subspectacular abscessation. © 2014 American College of Veterinary Ophthalmologists.

  4. Analysis of the nonlinear dynamics of a 2-axle freight wagon in curves

    DEFF Research Database (Denmark)

    Di Gialleonardo, Egidio; Bruni, Stefano; True, Hans

    2014-01-01

    and bifurcations are identified for some particular values of the curve radius. For the single car case, it is shown that depending on the curve radius and the vehicle speed the carbody may experience severe periodic oscillations at speeds lying in the operating range of the vehicle. For the car-assembly case...

  5. Propagating and annihilating vortex dipoles in the Gross-Pitaevskii equation

    CERN Document Server

    Rorai, Cecilia; Fisher, Michael E

    2013-01-01

    Quantum vortex dynamics in Bose-Einstein condensates or superfluid helium can be informatively described by the Gross-Pitaevskii (GP) equation. Various approximate analytical formulae for a single stationary vortex are recalled and their shortcomings demonstrated. Significantly more accurate two-point [2/2] and [3/3] Pade' approximants for stationary vortex profiles are presented. Two straight, singly quantized, antiparallel vortices, located at a distance d apart, form a vortex dipole, which, in the GP model, can either annihilate or propagate indefinitely as a `solitary wave'. We show, through calculations performed in a periodic domain, that the details and types of behavior displayed by vortex dipoles depend strongly on the initial conditions rather than only on the separation distance (as has been previously claimed). It is found, indeed, that the choice of the initial two-vortex profile (i.e., the modulus of the `effective wave function'), strongly affects the vortex trajectories and the time scale of t...

  6. Vast Portfolio Selection with Gross-exposure Constraints*

    Science.gov (United States)

    Fan, Jianqing; Zhang, Jingjin; Yu, Ke

    2012-01-01

    We introduce the large portfolio selection using gross-exposure constraints. We show that with gross-exposure constraint the empirically selected optimal portfolios based on estimated covariance matrices have similar performance to the theoretical optimal ones and there is no error accumulation effect from estimation of vast covariance matrices. This gives theoretical justification to the empirical results in Jagannathan and Ma (2003). We also show that the no-short-sale portfolio can be improved by allowing some short positions. The applications to portfolio selection, tracking, and improvements are also addressed. The utility of our new approach is illustrated by simulation and empirical studies on the 100 Fama-French industrial portfolios and the 600 stocks randomly selected from Russell 3000. PMID:23293404

  7. Vast Portfolio Selection with Gross-exposure Constraints().

    Science.gov (United States)

    Fan, Jianqing; Zhang, Jingjin; Yu, Ke

    2012-01-01

    We introduce the large portfolio selection using gross-exposure constraints. We show that with gross-exposure constraint the empirically selected optimal portfolios based on estimated covariance matrices have similar performance to the theoretical optimal ones and there is no error accumulation effect from estimation of vast covariance matrices. This gives theoretical justification to the empirical results in Jagannathan and Ma (2003). We also show that the no-short-sale portfolio can be improved by allowing some short positions. The applications to portfolio selection, tracking, and improvements are also addressed. The utility of our new approach is illustrated by simulation and empirical studies on the 100 Fama-French industrial portfolios and the 600 stocks randomly selected from Russell 3000.

  8. Gross-Pitaevski map as a chaotic dynamical system

    Science.gov (United States)

    Guarneri, Italo

    2017-03-01

    The Gross-Pitaevski map is a discrete time, split-operator version of the Gross-Pitaevski dynamics in the circle, for which exponential instability has been recently reported. Here it is studied as a classical dynamical system in its own right. A systematic analysis of Lyapunov exponents exposes strongly chaotic behavior. Exponential growth of energy is then shown to be a direct consequence of rotational invariance and for stationary solutions the full spectrum of Lyapunov exponents is analytically computed. The present analysis includes the "resonant" case, when the free rotation period is commensurate to 2 π , and the map has countably many constants of the motion. Except for lowest-order resonances, this case exhibits an integrable-chaotic transition.

  9. The San Andreas fault experiment. [gross tectonic plates relative velocity

    Science.gov (United States)

    Smith, D. E.; Vonbun, F. O.

    1973-01-01

    A plan was developed during 1971 to determine gross tectonic plate motions along the San Andreas Fault System in California. Knowledge of the gross motion along the total fault system is an essential component in the construction of realistic deformation models of fault regions. Such mathematical models will be used in the future for studies which will eventually lead to prediction of major earthquakes. The main purpose of the experiment described is the determination of the relative velocity of the North American and the Pacific Plates. This motion being so extremely small, cannot be measured directly but can be deduced from distance measurements between points on opposite sites of the plate boundary taken over a number of years.

  10. GLOBALIZATION AND GROSS DOMESTIC PRODUCT CONSTRUCTION IN ASEAN

    Directory of Open Access Journals (Sweden)

    Muhammad Sri Wahyudi Suliswanto

    2011-09-01

    Full Text Available There is no more doubt about the importance of economic growth, which can be calculated fromGross Domestic Product (GDP. This research analyzes the role of globalization on GDP inASEAN-5 by estimating panel data. It uses a fixed effect approach to accommodate various characteristicsin the countries. To accommodate such variation, it assumes that the intercepts variesacross these countries, while the slopes remain similar. Based on the estimation result, it suggeststhat net export and foreign direct investment represent the globalization process. Both have positiveand significant influences on GDP in the corresponding countries.Keywords: Globalization, international trade, foreign direct investment, gross domestic productJEL classification numbers: E01, F51, F43

  11. PREDICTION OF GROSS FEED EFFICIENCY IN ITALIAN HOLSTEIN FRIESIAN BULLS

    Directory of Open Access Journals (Sweden)

    Raffaella Finocchiaro

    2015-09-01

    Full Text Available The aim of this study was to predict gross feed efficiency of Italian Holstein Friesian bulls selected for production, functional and type traits. A total of 12,238 bulls, from the April 2015 genetic evaluation, were used. Predicted daily gross feed efficiency (pFE was obtained as ratio between milk yield (MY and predicted dry matter intake (pDMI. Phenotypic trend for MY, predicted body weight (pBW and pFE were calculated by the bull birth year. The results suggest that pFE can be successfully selected to increase profitability of dairy cattle using the current milk recording system. Direct measurements on DMI should be considered to confirm results of pFE obtained in the present study.

  12. Gross efficiency and energy expenditure in kayak ergometer exercise.

    Science.gov (United States)

    Gomes, B B; Mourão, L; Massart, A; Figueiredo, P; Vilas-Boas, J P; Santos, A M C; Fernandes, R J

    2012-08-01

    We purposed to study energy expenditure, power output and gross efficiency during kayak ergometer exercise in 12 elite sprint kayakers. 6 males (age 24.2±4.8 years, height 180.4±4.8 cm, body mass 79.7±8.5 kg) and 6 females (age 24.3±4.5 years, height 164.5±3.9 cm, body mass 65.4±3.5 kg), performed an incremental intermittent protocol on kayak ergometer with VO2 and blood lactate concentration assessment, a non-linear increase between power output and energy expenditure being observed. Paddling power output, energy expenditure and gross efficiency corresponding to VO2max averaged 199.92±50.41 W, 75.27±6.30 ml.kg - 1.min - 1, and 10.10±1.08%. Male kayakers presented higher VO2max, power output and gross efficiency at the VO2max, and lower heart rate and maximal lactate concentration than females, but no differences were found between genders regarding energy expenditure at VO2max. Aerobic and anaerobic components of energy expenditure evidenced a significant contribution of anaerobic energy sources in sprint kayak performance. Results also suggested the dependence of the gross efficiency on the changes in the amount of the aerobic and anaerobic contributions, at heavy and severe intensities. The inter-individual variance of the relationship between energy expenditure and the corresponding paddling power output revealed a relevant tracking for females (FDγ=0.73±0.06), conversely to the male group (FDγ=0.27±0.08), supporting that some male kayakers are more skilled in some paddling intensities than others.

  13. Constructive Renormalization of 2-dimensional Grosse-Wulkenhaar Model

    CERN Document Server

    Wang, Zhituo

    2012-01-01

    In this talk we briefly report the recent work on the construction of the 2-dimensional Grosse-Wulkenhaar model with the method of loop vertex expansion. We treat renormalization with this new tool, adapt Nelson's argument and prove Borel summability of the perturbation series. This is the first non-commutative quantum field theory model to be built in a non-perturbative sense.

  14. Degeneration of the long biceps tendon: comparison of MRI with gross anatomy and histology.

    Science.gov (United States)

    Buck, Florian M; Grehn, Holger; Hilbe, Monika; Pfirrmann, Christian W A; Manzanell, Silvana; Hodler, Jürg

    2009-11-01

    The objective of our study was to relate alterations in biceps tendon diameter and signal on MR images to gross anatomy and histology. T1-weighted, T2-weighted fat-saturated, and proton density-weighted fat-saturated spin-echo sequences were acquired in 15 cadaveric shoulders. Biceps tendon diameter (normal, flattened, thickened, and partially or completely torn) and signal intensity (compared with bone, fat, muscle, and joint fluid) were graded by two readers independently and in a blinded fashion. The distance of tendon abnormalities from the attachment at the glenoid were noted in millimeters. MRI findings were related to gross anatomic and histologic findings. On the basis of gross anatomy, there were six normal, five flattened, two thickened, and two partially torn tendons. Reader 1 graded nine diameter changes correctly, missed two, and incorrectly graded four. The corresponding values for reader 2 were seven, one, and five, respectively, with kappa = 0.75. Histology showed mucoid degeneration (n = 13), lipoid degeneration (n = 7), and fatty infiltration (n = 6). At least one type of abnormality was found in each single tendon. Mucoid degeneration was hyperintense compared with fatty infiltration on T2-weighted fat-saturated images and hyperintense compared with magic-angle artifacts on proton density-weighted fat-saturated images. MRI-based localization of degeneration agreed well with histologic findings. Diameter changes are specific but not sensitive in diagnosing tendinopathy of the biceps tendon. Increased tendon signal is most typical for mucoid degeneration but should be used with care as a sign of tendon degeneration.

  15. Landscape History of Grosses Moos, NW Swiss Alpine Foreland.

    Science.gov (United States)

    Joanna Heer, Aleksandra; Adamiec, Grzegorz; Veit, Heinz; May, Jan-Hendrik; Novenko, Elena; Hajdas, Irka

    2017-04-01

    The western Swiss Plateau with Lake Neuchâtel is part of the alpine foreland and among the key areas for the reconstruction of environmental changes since the last postglacial. This study was carried out in a landscape located NE of the lake and called Grosses Moos (The Large Fen) - currently designated the Swiss largest, continuous farming area, after the fen was drained in course of landscape engineering projects performed in Switzerland at the end of the 19th century. The study contributes new results from nine excavations of littoral ridges identified in Grosses Moos, and integrates sedimentology, paleo-environmental analysis and three independent chronological methods. Radiocarbon dating, pollen analysis and optically stimulated luminescence (OSL) were applied to the sediments. While pollen and radiocarbon follow the standard procedures, the evaluation of the luminescence age estimates demanded adjustment according to the physical and microdosimetric properties of the alpine quartz, and consideration of the peculiarities of the changing littoral environments of Grosses Moos. The Grosses Moos landscape developed on the temporary surface of the post-Last Glacial sedimentary infill of the over-deepened glacial Aare valley. In this study the landscape history has been fitted into the existing supraregional time scales of NGRIP, the Swiss bio-zones system and the human history based on archaeological and historic records and covers a time span of up to 15'000 yr b2k. The wide-ranging suite of geomorphic features and sedimentary sequences, including littoral lake sediments, beach ridges, dunes, palaeo-channels, peat and colluvial deposits, enable the extensive reconstruction of spatially and temporally variable natural shaping processes. In addition, our results indicate remobilization of soil, colluvium, and sediment due to human settlement activities since the Neolithic - with an important increase in sediment load and spatial variability since the Bronze Age

  16. Design and application of the car front axle road simulation test%轿车前桥道路模拟台架疲劳试验设计及应用

    Institute of Scientific and Technical Information of China (English)

    韩峰; 李国峰; 于翠

    2016-01-01

    This paper based on the vertical force, vertical force, lateral force of automobile front axle head and the hydraulic system (MTS), and one vehicle model in the proving ground of front axle load spectrum to design bench test for fatigue. Road simulation was carried out on the front axle. To reduce the design cost, shorten the design time, produce good economic benefit.%文章基于前桥轴头垂直力、纵向力、侧向力和 MTS 液压系统,以及某车型在试验场实测得到的前桥载荷谱,单纯对前桥进行台架道路模拟耐久试验设计。降低设计成本,缩短设计周期,产生较好的经济效益。

  17. Dynamic Analysis of Light Automotive Front Axle Based on FEM%轻型载货汽车前轴的有限元动态特性分析

    Institute of Scientific and Technical Information of China (English)

    王科

    2015-01-01

    汽车前轴是汽车最重要的承重件之一,其设计的可靠性直接影响整车性能的发挥。利用有限元方法研究汽车前轴的动态特性,并通过频率响应提取动刚度,为前轴设计提供了频域的设计方法。%Front axle of the light truck is one of the most important load-bearing parts. Its design reliability has impact on the vehicle performance. In this paper, the dynamic characteristics of the automotive front axle is researched by using the finite el-ement method ( FEM) , and its dynamic stiffness is also extracted with frequency response. We hope that would provide a de-sign method for front axle in the frequency domain.

  18. 多轴汽车驻车制动性能分析方法%Analysis Method of Parking Braking Performance for Multi-axle Vehicles

    Institute of Scientific and Technical Information of China (English)

    何仁; 童成前; 何建清

    2011-01-01

    Taking three-axle vehicle as an example, the calculation formula of parking grade limit of multiaxle vehicle is derived with its influencing factors analyzed. On this basis, an analysis method for parking-braking performance of multi-axle vehicle is proposed, in which the maximum parking grade is determined by comparing parking grade limit and the maximum parking grade calculated by torque method. In addition, a concept named utilization rate of grade limit is proposed as a supplement to the analysis indicators of parking braking performance.The results of real sample analysis show that the method proposed is simple, pragmatic and can effectively analyze the parking braking performance of multi-axle vehicles.%以三轴汽车为例,推导出多轴汽车的驻车极限坡度计算公式,并对其影响因素进行分析.在此基础上,提出了多轴汽车的驻车制动性能分析方法,即通过对驻车极限坡度与力矩法求出的最大驻车坡度进行比较而获得汽车的最大驻车坡度:外,提出了极限坡度利用率的概念,作为对驻车制动性能分析指标的补充.实例分析结果表明,该方法简单、实用,能对多轴汽车驻车制动性能进行有效分析.

  19. Relationship Between Gross Motor Function and Daily Functional Skill in Children With Cerebral Palsy

    OpenAIRE

    Kwon, Tae Gun; Yi, Sook-Hee; Kim, Tae Won; Chang, Hyun Jung; Kwon, Jeong-Yi

    2013-01-01

    Objective To investigate the relationship between gross motor function and daily functional skill in children with cerebral palsy (CP) and to explore how this relationship is moderated by the Gross Motor Function Classification System, Bimanual Fine Motor Function (BFMF), neuromotor types, and limb distribution of CP. Methods A cross-sectional survey of 112 children with CP (range, 4 years to 7 years and 7 months) was performed. Gross motor function was assessed with the Gross Motor Function ...

  20. Non-contacting fluid ring seal systems for railcar axle bearing systems: Quarterly progress report No. 1, June 15 to September 15, 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    The main objectives of this DOE contract is the technical development of a practical, cost effective Fluid Ring seal system capable of: Drastically reducing locomotive drawbar traction power requirements by lowering seal friction losses prevalent in present railcar axle bearing systems; increasing reliability and safety of railroad cars by minimizing bearing lubricant leakage and minimizing bearing ''hot boxes''; and improving the productivity of the railway transportation systems by reducing rolling stock ''outages'' due to long seal life. 14 refs.

  1. Non-contacting fluid ring seal systems for railcar axle bearing systems: Quarterly progress report No. 4, March 16-June 15, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    The main objectives of this DOE contract is the technical development of a practical, cost effective Fluid Ring seal system capable of: Drastically reducing locomotive drawbar traction power requirements by lowering seal friction losses prevalent in present railcar axle bearing systems; increasing reliability and safety of railroad cars by minimizing bearing lubricant leakage and minimizing bearing ''hot boxes''; and improving the productivity of the railway transportation systems by reducing rolling stock ''outages'' due to long seal life. Listed in this report are the seal test data.

  2. Palindrome-mediated Translocations in Humans: A New Mechanistic Model for Gross Chromosomal Rearrangements

    Directory of Open Access Journals (Sweden)

    Hidehito Inagaki

    2016-07-01

    Full Text Available Palindromic DNA sequences, which can form secondary structures, are widely distributed in the human genome. Although the nature of the secondary structure—single-stranded hairpin or double-stranded cruciform—has been extensively investigated in vitro, the existence of such unusual non-B DNA in vivo remains controversial. Here, we review palindrome-mediated gross chromosomal rearrangements possibly induced by non-B DNA in humans. Recent advances in next-generation sequencing have not yet overcome the difficulty of palindromic sequence analysis. However, a dozen palindromic AT-rich repeat (PATRR sequences have been identified at the breakpoints of recurrent or non-recurrent chromosomal translocations in humans. The breakages always occur at the center of the palindrome. Analyses of polymorphisms within the palindromes indicate that the symmetry and length of the palindrome affect the frequency of the de novo occurrence of these palindrome-mediated translocations, suggesting the involvement of non-B DNA. Indeed, experiments using a plasmid-based model system showed that the formation of non-B DNA is likely the key to palindrome-mediated genomic rearrangements. Some evidence implies a new mechanism that cruciform DNAs may come close together first in nucleus and illegitimately joined. Analysis of PATRR-mediated translocations in humans will provide further understanding of gross chromosomal rearrangements in many organisms.

  3. Gross Morphological Features of the Organ Surface Primo-Vascular System Revealed by Hemacolor Staining

    Directory of Open Access Journals (Sweden)

    Chae Jeong Lim

    2013-01-01

    Full Text Available The primo-vascular system (PVS, which consists of primo-vessels (PVs and primo-nodes (PNs, is a novel thread-like structure identified in many animal species. Various observational methods have been used to clarify its anatomical properties. Here, we used Hemacolor staining to examine the gross morphology of organ-surface PVS in rats. We observed a sinus structure (20–50 μm with a remarkably low cellularity within PNs and PVs and several lines of ductules (3–5 μm filled with single cells or granules (~1 μm in PV. Both sinuses and ductules were linearly aligned along the longitudinal axis of the PVS. Such morphology of the PVS was further confirmed by acridine orange staining. In PN slices, there was a honeycomb-like structure containing the granules with pentagonal lumens (~10 μm. Both PVs and PNs were densely filled with WBCs, RBCs, and putative mast cells (MCs, which were 90.3%, 5.9%, and 3.8% of the cell population, respectively. Granules in putative MCs showed spontaneous vibrating movements. In conclusion, the results show that Hemacolor, a simple and rapid staining system, can reveal the gross morphological features reported previously. Our findings may help to elucidate the structure and function of the PVS in normal and disease states in future studies.

  4. 26 CFR 1.927(b)-1T - Temporary regulations; Definition of gross receipts.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Temporary regulations; Definition of gross...(b)-1T Temporary regulations; Definition of gross receipts. (a) General rule. Under section 927(b.... The FSC's gross receipts for purposes of computing its profit under the administrative pricing...

  5. The relationship between gross motor skills and academic achievement in children with learning disabilities

    NARCIS (Netherlands)

    Westendorp, Marieke; Hartman, Esther; Houwen, Suzanne; Smith, Joanne; Visscher, Chris

    2011-01-01

    The present study compared the gross motor skills of 7- to 12-year-old children with learning disabilities (n = 104) with those of age-matched typically developing children (n = 104) using the Test of Gross Motor Development-2. Additionally, the specific relationships between subsets of gross motor

  6. 46 CFR 130.110 - Internal communications on OSVs of less than 100 gross tons.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Internal communications on OSVs of less than 100 gross... Internal communications on OSVs of less than 100 gross tons. Each vessel of less than 100 gross tons... have a fixed means of communication between the pilothouse and the place where the auxiliary means...

  7. The relationship between gross motor skills and academic achievement in children with learning disabilities

    NARCIS (Netherlands)

    Westendorp, Marieke; Hartman, Esther; Houwen, Suzanne; Smith, Joanne; Visscher, Chris

    2011-01-01

    The present study compared the gross motor skills of 7- to 12-year-old children with learning disabilities (n = 104) with those of age-matched typically developing children (n = 104) using the Test of Gross Motor Development-2. Additionally, the specific relationships between subsets of gross motor

  8. 26 CFR 1.872-1 - Gross income of nonresident alien individuals.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Gross income of nonresident alien individuals. 1...) INCOME TAX (CONTINUED) INCOME TAXES Nonresident Aliens and Foreign Corporations § 1.872-1 Gross income of nonresident alien individuals. (a) In general—(1) Inclusions. The gross income of a nonresident...

  9. 26 CFR 20.2031-1 - Definition of gross estate; valuation of property.

    Science.gov (United States)

    2010-04-01

    ..., except that if the executor elects the alternate valuation method under section 2032, it is the fair... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Definition of gross estate; valuation of... § 20.2031-1 Definition of gross estate; valuation of property. (a) Definition of gross estate. Except...

  10. 26 CFR 1.924(a)-1T - Temporary regulations; definition of foreign trading gross receipts.

    Science.gov (United States)

    2010-04-01

    ... trading gross receipts. 1.924(a)-1T Section 1.924(a)-1T Internal Revenue INTERNAL REVENUE SERVICE... United States § 1.924(a)-1T Temporary regulations; definition of foreign trading gross receipts. (a) In general. The term “foreign trading gross receipts” means any of the five amounts described in...

  11. Finite Element Analysis of A Front Axle in Lateral Sliding to Limit Condition%某载货车前轴侧滑工况有限元分析

    Institute of Scientific and Technical Information of China (English)

    冯美波; 刘新荣; 李秀波

    2015-01-01

    利用有限元分析软件Workbench对某载货车前轴进行有限元分析,得出其在极限侧滑工况下的应力分布,从而为前轴的设计提供一定的理论依据。%Using finite element analysis software Workbench to analyze a front axle when working on lateral sliding to limit condition, and the stress distribution is obtained. So it can provide certain theoretical basis for the design of front axle.

  12. 高速公路路段交通量分析及轴载换算%Analysis of Traffic Volume and Equivalent Axle Load Factors in Freeway Sections

    Institute of Scientific and Technical Information of China (English)

    朱靓雯; 刘黎萍

    2016-01-01

    交通荷载数据对沥青路面设计和管理有重要作用。轴载谱方法可以更为全面、准确地描述交通荷载。文中收集了江西省部分高速公路荷载站点的实测轴载数据和交通量数据。通过对每一辆车进出收费站的名称识别,结合公路网分布统计得到各路段的交通荷载数据集合。对各路段实测轴载数据特征、交通增长率和累计标准轴次等进行分析,建立了轴载谱数据和交通量数据之间的关系,并给出了调查地区的当量轴次换算系数参考值。%Traffic loading data is very important for asphalt pavement design and management.Axle load spectrum is more comprehensive and accurate in describing the traffic load.This study collected the measured axle load data and traffic volume data of asphalt pavement freeways from toll gates in Jiangxi Province.Traffic loading data in freeway sections is obtained through the data from the en-trance and exit toll gate,combined with the highway network.The data was used to analyze the axle load spectrum factors,the number of accumulated equivalent axle loads,and the growth rate of equiv-alent axle loads.It has been found that the growth rate of equivalent axle loads in some highway sec-tions is negative.In addition,the relationship between axle load data and traffic volume data was de-veloped through the equivalent axle load factors,the value of which in investigated area was listed at last.

  13. Simulating the Effects of Surface Roughness on Reinforced Concrete T Beam Bridge under Single and Multiple Vehicles

    Directory of Open Access Journals (Sweden)

    Rahul Kalyankar

    2016-01-01

    Full Text Available This research focuses on the application of the spatial system of finite element modeling for the vehicle-bridge interaction on reinforced concrete US Girder Bridge in order to obtain the effect of surface roughness. Single vehicle and multiple vehicles on reinforced concrete T beam bridge were studied with variable surface roughness profiles. The effects of six different surface roughness profiles (very good, good, measured, average, poor, and very poor were investigated for vehicle-bridge interaction. The values of the Dynamic Amplification Factor (DAF were obtained for single and multiple vehicles on T Beam Bridge for different surface roughness profiles, along with the distances between the axles of heavy vehicle. It was observed that when the bridge has very good, good, measured, and average surface roughness, the DAF values for the single vehicle over the bridge were observed to be within acceptable limits specified by AASHTO. However, for the bridge with multiple vehicles only very good and measured surface roughness profiles showed a DAF and vehicle axle distances within the acceptable limits. From the current studies, it was observed that the spatial system showed reliable responses for predicting the behavior of the bridge under variable road surface roughness conditions and was reliable in vehicle axle detection, and therefore, it has a potential to be use for realistic simulations.

  14. The response of gross nitrogen mineralization to labile carbon inputs

    Science.gov (United States)

    Bengtson, Per

    2014-05-01

    Input of labile carbon sources to forest soils commonly result in priming, i.e. an increase in the microbial decomposition of soil organic matter. Efforts aimed at quantifying the extent of priming have, to date, largely focused on soil organic matter decomposition manifested as soil respiration. Less is known about how gross nitrogen mineralization responds to input of labile carbon. It is often assumed that increased priming results in decreased soil carbon stocks. However, microbial mineralization of organic nitrogen into plant available forms is a major factor limiting primary production in forests. If increased decomposition of soil organic matter in response to labile carbon is accompanied by a concurrent increased nitrogen mineralization, this could result in elevated primary production and higher rates of plant derived organic matter input to soils. Therefore, in order to fully understand the effect of priming on net ecosystem exchange and soil carbon stocks, it is vital to consider if increased decomposition of soil organic matter caused by priming also results in increased nitrogen mineralization. Here I present the results from a series of experiments aimed at determining if, and to which extent, gross nitrogen mineralization is stimulated by input of labile carbon. The results suggest that it is by no means uncommon to find an increase in gross N mineralization rates in response to labile carbon inputs. The magnitude of the increase seems dependent on the nitrogen status of the soil, as well as the concentration and rate of labile carbon inputs. However, continuous input of labile carbon sources that also contains nitrogen, e.g. amino acids, seems to inhibit rather than increase the mineralization of organic nitrogen. These findings suggest that there is a potential for a positive feedback between priming and primary production that needs to be considered in order to fully understand the influence of priming on net ecosystem exchange and soil carbon

  15. The Schroedinger functional for Gross-Neveu models

    Energy Technology Data Exchange (ETDEWEB)

    Leder, B.

    2007-04-18

    Gross-Neveu type models with a finite number of fermion flavours are studied on a two-dimensional Euclidean space-time lattice. The models are asymptotically free and are invariant under a chiral symmetry. These similarities to QCD make them perfect benchmark systems for fermion actions used in large scale lattice QCD computations. The Schroedinger functional for the Gross-Neveu models is defined for both, Wilson and Ginsparg-Wilson fermions, and shown to be renormalisable in 1-loop lattice perturbation theory. In two dimensions four fermion interactions of the Gross-Neveu models have dimensionless coupling constants. The symmetry properties of the four fermion interaction terms and the relations among them are discussed. For Wilson fermions chiral symmetry is explicitly broken and additional terms must be included in the action. Chiral symmetry is restored up to cut-off effects by tuning the bare mass and one of the couplings. The critical mass and the symmetry restoring coupling are computed to second order in lattice perturbation theory. This result is used in the 1-loop computation of the renormalised couplings and the associated beta-functions. The renormalised couplings are defined in terms of suitable boundary-to-boundary correlation functions. In the computation the known first order coefficients of the beta-functions are reproduced. One of the couplings is found to have a vanishing betafunction. The calculation is repeated for the recently proposed Schroedinger functional with exact chiral symmetry, i.e. Ginsparg-Wilson fermions. The renormalisation pattern is found to be the same as in the Wilson case. Using the regularisation dependent finite part of the renormalised couplings, the ratio of the Lambda-parameters is computed. (orig.)

  16. Verbal priming and taste sensitivity make moral transgressions gross.

    Science.gov (United States)

    Herz, Rachel S

    2014-02-01

    The aims of the present study were to assess whether: (a) visceral and moral disgust share a common oral origin (taste); (b) moral transgressions that are also viscerally involving are evaluated accordingly as a function of individual differences in taste sensitivity; (c) verbal priming interacts with taste sensitivity to alter how disgust is experienced in moral transgressions; and (d) whether gender moderates these effects. Standard tests of disgust sensitivity, a questionnaire developed for this research assessing different types of moral transgressions (nonvisceral, implied-visceral, visceral) with the terms "angry" and "grossed-out," and a taste sensitivity test of 6-n-propylthiouracil (PROP) were administered to 102 participants. Results confirmed past findings that the more sensitive to PROP a participant was the more disgusted they were by visceral, but not moral, disgust elicitors. Importantly, the findings newly revealed that taste sensitivity had no bearing on evaluations of moral transgressions, regardless of their visceral nature, when "angry" was the emotion primed. However, when "grossed-out" was primed for evaluating moral violations, the more intense PROP tasted to a participant the more "grossed-out" they were by all transgressions. Women were generally more disgust sensitive and morally condemning than men, but disgust test, transgression type, and priming scale modulated these effects. The present findings support the proposition that moral and visceral disgust do not share a common oral origin, but show that linguistic priming can transform a moral transgression into a viscerally repulsive event and that susceptibility to this priming varies as a function of an individual's sensitivity to the origins of visceral disgust-bitter taste.

  17. Complex saddles in the Gross-Witten-Wadia matrix model

    CERN Document Server

    Álvarez, Gabriel; Medina, Elena

    2016-01-01

    We give an exhaustive characterization of the complex saddle point configurations of the Gross-Witten-Wadia matrix model in the large-N limit. In particular, we characterize the cases in which the saddles accumulate in one, two, or three arcs, in terms of the values of the coupling constant and of the fraction of the total unit density that is supported in one of the arcs, and derive an explicit condition for gap closing associated to nonvacuum saddles. By applying the idea of large-N instanton we also give direct analytic derivations of the weak-coupling and strong-coupling instanton actions.

  18. Pathology Gross Photography: The Beginning of Digital Pathology.

    Science.gov (United States)

    Rampy, B Alan; Glassy, Eric F

    2015-06-01

    The underutilized practice of photographing anatomic pathology specimens from surgical pathology and autopsies is an invaluable benefit to patients, clinicians, pathologists, and students. Photographic documentation of clinical specimens is essential for the effective practice of pathology. When considering what specimens to photograph, all grossly evident pathology, absent yet expected pathologic features, and gross-only specimens should be thoroughly documented. Specimen preparation prior to photography includes proper lighting and background, wiping surfaces of blood, removing material such as tubes or bandages, orienting the specimen in a logical fashion, framing the specimen to fill the screen, positioning of probes, and using the right-sized scale.

  19. Four loop renormalization of the Gross-Neveu model

    CERN Document Server

    Gracey, J A; Schroder, Y

    2016-01-01

    We renormalize the SU(N) Gross-Neveu model in the modified minimal subtraction (MSbar) scheme at four loops and determine the beta-function at this order. The theory ceases to be multiplicatively renormalizable when dimensionally regularized due to the generation of evanescent 4-fermi operators. The first of these appears at three loops and we correctly take their effect into account in deriving the renormalization group functions. We use the results to provide estimates of critical exponents relevant to phase transitions in graphene.

  20. Gross shell structure at high spin in heavy nuclei

    CERN Document Server

    Deleplanque, M A; Pashkevich, V V; Chu, S Y; Unzhakova, A

    2004-01-01

    Experimental nuclear moments of inertia at high spins along the yrast line have been determined systematically and found to differ from the rigid-body values. The difference is attributed to shell effects and these have been calculated microscopically. The data and quantal calculations are interpreted by means of the semiclassical Periodic Orbit Theory. From this new perspective, features in the moments of inertia as a function of neutron number and spin, as well as their relation to the shell energies can be understood. Gross shell effects persist up to the highest angular momenta observed.

  1. Labor Absorption and Its Impact on Gross Regional Domestic Product

    OpenAIRE

    Made Ika Prastyadewi; Agus Suman; Devanto Shasta Pratomo

    2013-01-01

    The objective of this study is to examine the determinants of labor absorption in the trade, hotel and restaurant sector and its impact on Gross Regional Domestic Product/GRDP at Bali Province. This study is important due to the fact that the GRDP in this sector is the highest compared to other sector but the labor absorption is lower than the agriculture sector. This study used panel data comprising 9 regencies/cities at Bali Province in the period 2003-2009 including fixed effect model and ...

  2. Characterizing the development of sectoral gross domestic product composition.

    Science.gov (United States)

    Lutz, Raphael; Spies, Michael; Reusser, Dominik E; Kropp, Jürgen P; Rybski, Diego

    2013-07-01

    We consider the sectoral composition of a country's gross domestic product (GDP), i.e., the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations, we characterize the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing four country-specific parameters. Relating the agrarian with the industrial sector, a data collapse over all countries and all years supports the applicability of our approach. Depending on the parameter ranges, country development exhibits different transfer properties. Most countries follow three of eight characteristic paths. The types are not random but show distinct geographic and development patterns.

  3. Gross shell structure at high spin in heavy nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Deleplanque, Marie-Agnes; Frauendorf, Stefan; Pashkevich, Vitaly V.; Chu, S.Y.; Unzhakova, Anja

    2003-10-07

    Experimental nuclear moments of inertia at high spins along the yrast line have been determined systematically and found to differ from the rigid-body values. The difference is attributed to shell effect and these have been calculated microscopically. The data and quantal calculations are interpreted by means of the semiclassical Periodic Orbit Theory. From this new perspective, features in the moments of inertia as a function of neutron number and spin, as well as their relation to the shell energies can be understood. Gross shell effects persist up to the highest angular momenta observed.

  4. 载重汽车双前桥转向机构优化设计%Optimization Design of Double - front - axle Steering Mechanism of Heavy Truck

    Institute of Scientific and Technical Information of China (English)

    张蕾; 董恩国; 梁立学

    2012-01-01

    Based on multi-body dynamitic theory and the software of ADAMS, it builds a simulation model on a double-front-axle steering mechanism, establishes a mathematic model on a steering mechanism and rocker mechanism. The simulation analysis is performance according to the minimum steering error of the double-front-axle steering mechanism. Based on the simulation, it obtains the optimization results and researches the steering performance evaluation conclusions.%以多体系统动力学理论为基础,应用多体动力学软件ADAMS建立了载重汽车双前桥转向机构动力学仿真模型,以及转向梯形机构及中间摇臂机构的数学模型.基于各机构转角误差最小对设计参数进行了仿真优化分析.通过仿真分析,得到了双前桥转向机构的优化结果以及转向性能的评价结论.

  5. FEM analysis of front axle vertical finishing process and mold development%前轴垂直整形工艺模拟与模具开发

    Institute of Scientific and Technical Information of China (English)

    曾琦; 蒋鹏

    2013-01-01

    Front axle is one of the important load parts in automobiles, the possibility of the front axle vertical finishing process was analyzed, the process parameters and mold structure of vertical finishing process were simulated and optimized with the help of computer numerical simulation technology. A kind of vertical finishing mold with hydraulic clamping system was designed on the basis of simulations. After vertical finishing process in the vertical finishing mold, the upper and lower surfaces of the spring seat are flattening, which can be drilled bolt holes and mounted directly. It is benefit for reducing the subsequent processing amount and meeting, which mounting requirements of spring seat.%前轴是汽车重要的承载件之一,本文分析了前轴锻件垂直整形工艺的可行性,通过计算机数值模拟技术模拟并优化垂直整形的工艺参数和模具结构,在模拟分析基础上设计出液压夹紧式垂直整形模.经垂直整形后,锻件弹簧座的上下表面基本压平,可以直接加工螺栓孔并进行安装,减少了后续加工量,并保证了弹簧座的安装要求.

  6. Intracellular signaling of the Ufo/Axl receptor tyrosine kinase is mediated mainly by a multi-substrate docking-site.

    Science.gov (United States)

    Braunger, J; Schleithoff, L; Schulz, A S; Kessler, H; Lammers, R; Ullrich, A; Bartram, C R; Janssen, J W

    1997-06-05

    Ufo/Axl belongs to a new family of receptor tyrosine kinases with an extracellular structure similar to that of neural cell adhesion molecules. In order to elucidate intracellular signaling, the cytoplasmic moiety of Ufo/Axl was used to screen an expression library according to the CORT (cloning of receptor targets) method. Three putative Ufo substrates were identified: phospholipase Cgamma1 (PLCgamma), as well as p85alpha and p85beta subunits of phosphatidylinositol 3'-kinase (PI3-kinase). Subsequently, chimeric EGFR/Ufo receptors consisting of the extracellular domains of the epidermal growth factor receptor (EGFR) and the transmembrane and intracellular moiety of Ufo were engineered. Using different far-Western blot analyses and coimmunoprecipitation assays, receptor binding of PLCgamma and p85 proteins as well as GRB2, c-src and lck was examined in vitro and in vivo. Competitive inhibition of substrate binding and mutagenesis experiments with EGFR/Ufo constructs revealed C-terminal tyrosine 821 (EILpYVNMDEG) as a docking site for multiple effectors, namely PLCgamma, p85 proteins, GRB2, c-src and lck. Tyrosine 779 (DGLpYALMSRC) demonstrated an additional, but lower binding affinity for the p85 proteins in vitro. In addition, binding of PLCgamma occurred through tyrosine 866 (AGRpYVLCPST). Moreover, our in vivo data indicate that further direct or indirect binding sites for PLCgamma, GRB2, c-src and lck on the human Ufo receptor may exist.

  7. The implications of particle energy and acidic media on gross alpha and gross beta determination using liquid scintillation

    Energy Technology Data Exchange (ETDEWEB)

    Zapata-Garcia, D. [Laboratori de Radiologia Ambiental (LRA), Departament de Quimica Analitica, Universitat de Barcelona, Marti i Franques, 1-11 Planta 3, E-08028 Barcelona (Spain); Llaurado, M., E-mail: montse.llaurado@ub.edu [Laboratori de Radiologia Ambiental (LRA), Departament de Quimica Analitica, Universitat de Barcelona, Marti i Franques, 1-11 Planta 3, E-08028 Barcelona (Spain); Rauret, G. [Laboratori de Radiologia Ambiental (LRA), Departament de Quimica Analitica, Universitat de Barcelona, Marti i Franques, 1-11 Planta 3, E-08028 Barcelona (Spain)

    2012-04-15

    The interaction of humans with radioactivity present in the environment from natural and artificial sources necessitates an evaluation of its risk on human health. Gross alpha and gross beta activities can provide a rapid evaluation of the radioactive content of a sample and can be simultaneously determined by using liquid scintillation counters. However, calibration of the liquid scintillation counter is required and is affected by many factors, such as particle energy and the acidity of the media. This study investigates what effect the particle energy used for calibration has on misclassification and how to account for this misclassification in routine measurements. The variability in measurement produced by the final pH, as well as any acids used in sample treatment, was also studied. These results showed that the most commonly used acid for these types of analyses, HNO{sub 3}, produced a high amount of misclassifications at very low pH. The results improved when HCl was used to adjust the sample to low pH. - Highlights: Black-Right-Pointing-Pointer We study the effect of alpha and beta energies on PSA optimisation. Black-Right-Pointing-Pointer The optimum PSA shifts to higher values as the alpha energy increases. Beta energies do not affect it. Black-Right-Pointing-Pointer We study the effect of pH on the simultaneous determination of gross alpha/beta activities. Black-Right-Pointing-Pointer HNO{sub 3} produces a high amount of misclassification at very low pH. Black-Right-Pointing-Pointer The results improve when HCl is used to adjust the sample to low pH.

  8. Gross motor function in children with spastic Cerebral Palsy and Cerebral Visual Impairment: A comparison between outcomes of the original and the Cerebral Visual Impairment adapted Gross Motor Function Measure-88 (GMFM-88-CVI).

    Science.gov (United States)

    Salavati, M; Rameckers, E A A; Waninge, A; Krijnen, W P; Steenbergen, B; van der Schans, C P

    2017-01-01

    To investigate whether the adapted version of the Gross Motor Function Measure-88 (GMFM-88) for children with Cerebral Palsy (CP) and Cerebral Visual Impairment (CVI) results in higher scores. This is most likely to be a reflection of their gross motor function, however it may be the result of a better comprehension of the instruction of the adapted version. The scores of the original and adapted GMFM-88 were compared in the same group of children (n=21 boys and n=16 girls), mean (SD) age 113 (30) months with CP and CVI, within a time span of two weeks. A paediatric physical therapist familiar with the child assessed both tests in random order. The GMFCS level, mental development and age at testing were also collected. The Wilcoxon signed-rank test was used to compare two different measurements (the original and adapted GMFM-88) on a single sample, (the same child with CP and CVI; pvisual problems. On the basis of these findings, we recommend using the adapted GMFM-88 to measure gross motor functioning in children with CP and CVI. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. The Strength Analysis of a driving axle housing for a low-floor bus%某低地板客车用驱动桥壳强度分析

    Institute of Scientific and Technical Information of China (English)

    郭克刚; 王锋刚; 肖云娜

    2012-01-01

    This article describes the form of installation and main technical parameters of a driving axle for a low-floor bus, and provides an analytical method for driving axle housing, then does the strength analysis for the driving axle housing in the following typical working conditions: vertical bending, braking, comering and maximum traction conditions based on finite element analysis software HyperWorks. The above analysis results of the text provide some reference for finite element analysis of the follow-up to the driving axle housing.%本文介绍了某低地板客车用驱动桥的安装形式及主要技术参数,基于有限元分析软件HyperWorks提供了一种驱动桥壳的分析方法,并对该驱动桥壳进行了以下典型工况的强度分析:垂直弯曲、制动、转弯和最大牵引力工况。本文对后续驱动桥壳的有限元分析具有一定的参考作用。

  10. 1580热轧R2粗轧机主传动十字轴失效分析%Invalidation analysis for main driving cross axle of R2 roughing mill in 1580 hot rolling mill

    Institute of Scientific and Technical Information of China (English)

    廖永锋

    2011-01-01

    对宝钢1580热轧R2粗轧机主传动十字轴的失效原因进行了分析,指出该十字轴主要是在1.5倍额定负荷以上的工况条件下产生接触疲劳破坏,并提出了对十字轴表面重新加工处理,使其恢复表面硬度和粗糙度,重新单配轴承的修复方案,延长了十字轴的使用寿命.%The invalidation reason of R2 main driving cross axle in Baosteel 1580 hot rolling mill is analyzed.It is pointed out that the contact fatigue failure of the cross axle is due to more than 1.5 times of nominal load under working condition.An approach to treat the damaged working surface of the cross axle, and recover its surface stiffness and roughness, then make up bearing is put forward, and that service life of cross axle is prolonged.

  11. THE LIFETIME EXTENSION OF CAR AXLES TYPES OF RU1 AND RUSH WHEELSET FREIGHT CARS, RESTORED BY THE METHOD OF PLASMA-ARC METALLIZATION OF THE NECK AND UNDER PARTS MANUAL

    Directory of Open Access Journals (Sweden)

    V. I. Zelenin

    2009-03-01

    Full Text Available The restoration method for the journals and wheel seats of the freight wagon wheelsets by means of plasma-arc metallization is presented and the results of the bench fatigue tests with the advisable operation life of the axles restored are given.

  12. ORNL-GM: Development of Ionic Liquid-Additized, GF-5/6 Compatible Low-Viscosity Oils for Automotive Engine and Rear Axle Lubrication for 4% Improved Fuel Economy

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Jun [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Zhou, Yan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Luo, Huimin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Toops, Todd J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brookshear, Daniel W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stump, Benjamin C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Viola, Michael B. [General Motors (GM) Technical Center, Pontiac, MI (United States); Zreik, Khaled [General Motors (GM) Technical Center, Pontiac, MI (United States); Ahmed, Tasfia [General Motors (GM) Technical Center, Pontiac, MI (United States)

    2017-01-01

    The overall objective of this project are as follows: Further develop ionic liquid (IL)-additized lowviscosity engine oils meeting the GF-5/6 specifications and possessing superior lubricating characteristics; Expand the IL additive technology to rear axle lubricants; and Seek a combined improvement in the vehicle fuel economy

  13. Laparoscopic ovum collection in sheep: gross and microscopic evaluation of the ovary and influence on ooctye production.

    Science.gov (United States)

    Teixeira, P P M; Padilha, L C; Oliveira, M E F; Motheo, T F; da Silva, A S L; Barros, F F P C; Coutinho, L N; Flôres, F N; Lopes, M C S; Bandarra, M B; Silva, M A M; Vasconcelos, R O; Rodrigues, L F S; Vicente, W R R

    2011-09-01

    Gross and microscopic evaluations of the ovaries of sheep subjected to successive ovum collection were performed with the objective of identifying if there was interference in oocyte production and morphology of gonads. Gross evaluation of the internal genital tract was also performed. Eighteen ewes of the Santa Inês breed were randomly distributed into three experimental groups of six animals each; G0, G1 and G9 with no, one and nine repetitions, respectively. Estrous synchronization was achieved with a short protocol using MAP followed by single dose stimulation with 80mg of FSHp and 300 IU of eCG (IM). Laparoscopic ovum pick-up was performed 36h later, with 7-day intervals. The number of visualized follicles, aspirated follicles and oocytes recovery was recorded. After the last intervention, ovariectomy was performed for evaluation of gross and microscopical appearance and existence of lesions caused by follicular puncture, which were classified as absent (0), mild (1), moderate (2) and severe (3). The number of visualized follicles, aspirated follicles and oocytes recovery were 13.2±2.0, 11.3±3.0 and 5.8±2.3, respectively, with a recovery rate of 51.7%. No statistical difference was found between the nine sessions (P>0.05). Nine sessions of superovulation and ovum collection procedures did not cause ovarian lesions and did not interfere with the production of follicles in ewes of the Santa Inês breed.

  14. Gross Motor Profile and Its Association with Socialization Skills in Children with Autism Spectrum Disorders.

    Science.gov (United States)

    Pusponegoro, Hardiono D; Efar, Pustika; Soedjatmiko; Soebadi, Amanda; Firmansyah, Agus; Chen, Hui-Ju; Hung, Kun-Long

    2016-12-01

    While social impairment is considered to be the core deficit in children with autism spectrum disorder (ASD), a large proportion of these children have poor gross motor ability, and gross motor deficits may influence socialization skills in children with ASD. The objectives of this study were to compare gross motor skills in children with ASD to typically developing children, to describe gross motor problems in children with ASD, and to investigate associations between gross motor and socialization skills in children with ASD. This was a cross-sectional study including 40 ASD children aged from 18 months to 6 years and 40 age-matched typically developing controls. Gross motor and socialization skills were scored using the Vineland Adaptive Behavior Scales, 2(nd) edition (Vineland-II). Below average gross motor function was found in eight of 40 (20%) ASD children. The mean gross motor v-scale score in the ASD group was 15.1 [standard deviation (SD) 3.12], significantly lower than in the control group [18.7, SD 2.09, p = 0.0001; 95% confidence intervals (CI) from -4.725 to -2.525]. The differences were most prominent in ball throwing and catching, using stairs, jumping, and bicycling. The ASD children with gross motor impairments had a mean socialization domain score of 66.6 (SD 6.50) compared to 85.7 (SD 10.90) in those without gross motor impairments (p = 0.0001, 95% CI from -25.327 to -12.736). Children with ASD had lower gross motor skills compared to typically developing children. Gross motor impairments were found in 20% of the ASD children, and these children also had lower socialization skills than those without gross motor impairments. Copyright © 2016. Published by Elsevier B.V.

  15. Optimal Bilinear Control of Gross--Pitaevskii Equations

    KAUST Repository

    Hintermüller, Michael

    2013-01-01

    A mathematical framework for optimal bilinear control of nonlinear Schrödinger equations of Gross--Pitaevskii type arising in the description of Bose--Einstein condensates is presented. The obtained results generalize earlier efforts found in the literature in several aspects. In particular, the cost induced by the physical workload over the control process is taken into account rather than the often used L^2- or H^1-norms for the cost of the control action. Well-posedness of the problem and existence of an optimal control are proved. In addition, the first order optimality system is rigorously derived. Also a numerical solution method is proposed, which is based on a Newton-type iteration, and used to solve several coherent quantum control problems.

  16. Gross National Happiness: Ideology versus practices in Bhutanese Seconday Schools

    DEFF Research Database (Denmark)

    Kjær-Rasmussen, Lone Krogh; Giri, Krishna Prasad

    2015-01-01

    This paper investigates practices related to the ideology of infusing Gross National Happiness (GNH) into school curriculum, the effectiveness of the meditation and mind training and the implication of GNH for school environment. It also explores how GNH ambience has been managed and practiced......, the influence of the concept of GNH in school life generally and specifically and the effects on teachers and students of mindfull training in the class, how does it work? The investigation is based on empirical data from eight selected secondary schools spread all over Bhutan. Principals, teachers, students...... and parents were interviewed in 2012/2013 individually and in groups. Further more classroom observations took place. Finally the investigation is based on literature review and readings of documents, which describe and analyse policies, principles, strategies and philosophies related to the implementation...

  17. Measurement and Quantification of Gross Human Shoulder Motion

    Directory of Open Access Journals (Sweden)

    Jeremy T. Newkirk

    2013-01-01

    Full Text Available The shoulder girdle plays an important role in the large pointing workspace that humans enjoy. The goal of this work was to characterize the human shoulder girdle motion in relation to the arm. The overall motion of the human shoulder girdle was characterized based on motion studies completed on test subjects during voluntary (natural/unforced motion. The collected data from the experiments were used to develop surface fit equations that represent the position and orientation of the glenohumeral joint for a given humeral pointing direction. These equations completely quantify gross human shoulder girdle motion relative to the humerus. The equations are presented along with goodness-of-fit results that indicate the equations well approximate the motion of the human glenohumeral joint. This is the first time the motion has been quantified for the entire workspace, and the equations provide a reference against which to compare future work.

  18. Labor Absorption and Its Impact on Gross Regional Domestic Product

    Directory of Open Access Journals (Sweden)

    Made Ika Prastyadewi

    2013-12-01

    Full Text Available The objective of this study is to examine the determinants of labor absorption in the trade, hotel and restaurant sector and its impact on Gross Regional Domestic Product/GRDP at Bali Province. This study is important due to the fact that the GRDP in this sector is the highest compared to other sector but the labor absorption is lower than the agriculture sector. This study used panel data comprising 9 regencies/cities at Bali Province in the period 2003-2009 including fixed effect model and simultaneous equation model of Two-Stage Least Square. The results showed that GRDP, working age population, and the minimum wage have positive effect on employment, while the educated unemployment has no significant effect on the employment in the trade, hotel and restaurant sector. In addition, increases in employment and workers productivity have positive and significant effects the GRDP in the trade, hotel and restaurant sector at Bali Province.

  19. Specific features of measuring the ecologically adjusted gross regional product

    Directory of Open Access Journals (Sweden)

    Douginets Ganna V.

    2013-03-01

    Full Text Available The article formulates a necessity of deepening and improvement of ecological and economic indicators and considers the existing indices and indicators of sustainable development. It conducts a comparative analysis of existing norms of calculation of the ecological tax and fees for environmental pollution. It marks main problems of nature management in Ukraine and their consequences, namely, negative impact on health of the population. It offers methods of measurement of the ecologically adjusted gross regional product (EGRP on the basis of improvement of the cost method. It analyses dependence of the regional welfare on the state of environment with the help of measuring the EGRP of Ukrainian regions. It studies the pressure on Ukrainian regions by components: pollution of aquatic environment, atmospheric air, land resources and rates of waste formation. It conducts grouping of regions by EGRP per capita with specification of positive and negative dynamics of the indicator.

  20. Stimulation of gross dimethylsulfide (DMS) production by solar radiation

    Science.gov (United States)

    Galí, Martí; Saló, Violeta; Almeda, Rodrigo; Calbet, Albert; Simó, Rafel

    2011-08-01

    Oceanic gross DMS production (GP) exerts a fundamental control on the concentration and the sea-air flux of this climatically-active trace gas. However, it is a poorly constrained process, owing to the complexity of the microbial food web processes involved and their interplay with physical forcing, particularly with solar radiation. The “inhibitor method”, using dimethyldisulfide (DMDS) or other compounds to inhibit bacterial DMS consumption, has been frequently used to determine GP in dark incubations. In the work presented here, DMDS addition was optimized for its use in light incubations. By comparing simultaneous dark and light measurements of GP in meso- to ultraoligotrophic waters, we found a significant enhancement of GP in natural sunlight in 7 out of 10 experiments. Such stimulation, which was generally between 30 and 80% on a daily basis, occurred throughout contrasting microbial communities and oceanographic settings.

  1. Full Phase Diagram of the Massive Gross-Neveu Model

    CERN Document Server

    Schnetz, O; Urlichs, K; Schnetz, Oliver; Thies, Michael; Urlichs, Konrad

    2006-01-01

    The massive Gross-Neveu model is solved in the large N limit at finite temperature and chemical potential. The scalar potential is given in terms of Jacobi elliptic functions. It contains three parameters which are determined by transcendental equations. Self-consistency of the scalar potential is proved. The phase diagram for non-zero bare quark mass is found to contain a kink-antikink crystal phase as well as a massive fermion gas phase featuring a cross-over from light to heavy effective fermion mass. For zero bare quark mass we recover the three known phases kink-antikink crystal, massless fermion gas, and massive fermion gas. All phase transitions are shown to be of second order. Equations for the phase boundaries are given and solved numerically. Implications on condensed matter physics are indicated where our results generalize the bipolaron lattice in non-degenerate conducting polymers to finite temperature.

  2. Modeling and Simulation Analysis of Multi-Axle Steering Vehicle Based on Virtual Prototype Technology%基于虚拟样机技术的多轴转向车辆建模与仿真分析

    Institute of Scientific and Technical Information of China (English)

    张俊友; 贺翠华

    2013-01-01

    In order to improve the precision of multi-axle vehicles model, three-axis vehicles was taken as the research object, and the virtual prototype technology of three-axle steering vehicle was established using ADAMS/CAR. Based on zero side-slip angle of mass center and proportional control strategy, the three axles steering were set The handling stability of the three-axle steering vehicle were simulated, compared with traditional front wheel steering vehicle, and the results showed that three-axle steering steering vehicle has better performance.%为提高目前多轴转向车辆模型的精确度,以三轴车辆为研究对象,利用虚拟样机技术,在ADAMS/CAR中建立了三轴全轮转向车辆的动力学模型,依据三轴全轮转向车辆的零质心侧偏角转角控制策略,对全轮转向进行了相应设置.为验证车辆的操纵稳定性能,对其进行了仿真分析,主要考查其在低速大转角和高速小转角行驶情况下的响应特性,并与传统的前轮转向车辆进行了对比,结果表明全轮转向车辆在低速转弯时机动性高,中高速转向时稳定性好.

  3. 四轴车辆全轮转向之自动模式研究%A Research on the Automatic Mode of All-wheel Steering for Four-axle Vehicle

    Institute of Scientific and Technical Information of China (English)

    陈思忠; 郑凯锋

    2015-01-01

    在第2轴转角比例于第1轴转角,第3轴转角比例于第4轴转角的条件下,从理论上分析了全轮转向与双前桥转向之间的差异。接着以质心侧偏角为零,设计了控制器一和控制器二两种控制器,并再次分析了双前桥转向、带控制器一的全轮转向和带控制器二的全轮转向三者之间的区别与联系,为四轴车辆的全轮转向技术的研究提供了理论参考。%Under the condition of that the wheel turning angles in second and third axles are respectively proportional to those of first and fourth axles, the differences between all wheel steering and double-front-axle steer-ing are analyzed theoretically. Then with the sideslip angle of mass center set to zero, controller 1 and controller 2 are designed, and the differences and connections between double-front-axle steering, all wheel steering with con-troller 1 and all wheel steering with controller 2 are analyzed again, providing theoretical references for the research on the all wheel steering technique for four-axle vehicle.

  4. [Pineal region tumors in children: is gross-total resection necessary? A single-center experience].

    Science.gov (United States)

    López-Aguilar, Enrique; Garza-González, María del Carmen; Ortiz-Azpilcueta, Mariana; Sepúlveda-Vildósola, Ana Carolina; Rioscovian-Soto, Ana; de la Cruz-Yañez, Hermilo; Betanzos-Cabrera, Yadira

    2015-01-01

    Introducción: la supervivencia de los niños con tumores de la región pineal se ha incrementado en la última década; estos tienen una evolución insidiosa asociada con los desórdenes endocrinológicos y una alta morbilidad y mortalidad, sobre todo después de la resección. El objetivo es reportar la supervivencia, la morbilidad y mortalidad según el tipo de cirugía, la histología y el tratamiento en un grupo de niños con tumores de la región pineal. Métodos: estudio retrospectivo que incluyó a todos los pacientes con diagnóstico de tumor de la región pineal menores de 17 años de edad que acudieron en un periodo de 10 años a un hospital de pediatría. Se realizó una revisión histopatológica, se determinó la extensión de la resección y se estimó la supervivencia. Resultados: se incluyeron 46 pacientes, 36 de los cuales tenían expediente completo y material de patología adecuado. La resección total se realizó en 24 (66.6 %) y biopsia en 12 (33.3 %); fallecieron 23 pacientes (88 %) y fue el desequilibrio hidroelectrolítico la causa de 14 defunciones (60 %) y la progresión tumoral la causa de las 9 defunciones restantes (39.1 %). La sobrevida a 10 años de los pacientes tratados con resección total y biopsia fue del 52 y 75 %, respectivamente, con una p = 0.7; se presentaron alteraciones endocrinológicas en 13 (36.1%) pacientes de los cuales a 10 (76.9 %) se les realizó la resección de la tumoración. Conclusión: los tumores de la región pineal en niños se pueden tratar con biopsia diagnóstica seguida de tratamiento adyuvante con quimioterapia y radioterapia.

  5. Axle Lubricant Efficiency

    Science.gov (United States)

    2014-05-09

    increased to 7.8%. 15. SUBJECT TERMS Fuel Consumption, Fuel Economy , FMTV, SCPL, Gear Oil, Engine Oil, Transmission Oil, Fuel, SAE J1321 16...program that had shown beneficial effects in previous laboratory testing for fuel economy and engine durability [6]. For all oil changes a double...mile circular track where the current program was performed. Table 3 provides the operating speeds and distances for the highway cycle and a comparison

  6. Discriminating Talent Identified Junior Australian Footballers Using a Fundamental Gross Athletic Movement Assessment

    Directory of Open Access Journals (Sweden)

    Carl T. Woods, Harry G. Banyard, Ian McKeown, Job Fransen, Sam Robertson

    2016-09-01

    Full Text Available Talent identification (TID is a pertinent component of the sports sciences, affording practitioners the opportunity to target developmental interventions to a select few; optimising financial investments. However, TID is multi-componential, requiring the recognition of immediate and prospective performance. The measurement of athletic movement skill may afford practitioners insight into the latter component given its augmented relationship with functional sport specific qualities. It is currently unknown whether athletic movement skill is a discriminant quality in junior Australian football (AF. This study aimed to discriminate talent identified junior AF players from their non-talent identified counterparts using a fundamental gross athletic movement assessment. From a total of 50 under 18 (U18 AF players; two groups were classified a priori based on selection level; talent identified (n = 25; state academy representatives and non-talent identified (n = 25; state-based competition representatives. Players performed a fundamental gross athletic movement assessment based on the Athletic Ability Assessment (AAA, consisting of an overhead squat, double lunge (left and right legs, single leg Romanian deadlift (left and right legs, and a push up (six movement criterions. Movements were scored across three assessment points using a three-point scale (resulting in a possible score of nine for each movement. A multivariate analysis of variance revealed significant between group effects on four of the six movement criterions (d = 0.56 – 0.87; p = 0.01 – 0.02. Binary logistic regression models and a receiver operating characteristic curve inspection revealed that the overhead squat score provided the greatest group discrimination (β(SE = -0.89(0.44; p < 0.05, with a score of 4.5 classifying 64% and 88% of the talent identified and non-talent identified groups, respectively. Results support the integration of this assessment into contemporary talent

  7. Reply to Nicholson's comment on "Consistent calculation of aquatic gross production from oxygen triple isotope measurements" by Kaiser (2011

    Directory of Open Access Journals (Sweden)

    J. Kaiser

    2011-10-01

    Full Text Available The comment by Nicholson (2011a questions the "consistency" of the "definition" of the "biological end-member" used by Kaiser (2011a in the calculation of oxygen gross production. "Biological end-member" refers to the relative oxygen isotope ratio difference between photosynthetic oxygen and Air-O2 (abbreviated 17δP and 18δP for 17O/16O and 18O/16O, respectively.

    This comment has no merit for the following reasons: (a the isotopic composition of photosynthetic oxygen cannot be "defined", it can only be measured, modelled or calculated based on other data; (b the isotopic composition of photosynthetic oxygen was not "defined" in Kaiser (2011a, but derived from published measurements; (c the published measurements themselves were inconsistent and no single result could be identified as best; (d since no best value could be identified, a hypothetical base case was constructed in a way that was consistent with previous publications; (e the values of 17δP=−11.646‰ and 18δP=−22.835‰ assumed for the base case are compatible with the experimental evidence published before the paper of Kaiser (2011a; (f even if the "biological end-member" was based on a definition, there could be no argument about the "consistency" of this definition – as per its nature, a definition is arbitrary.

    The qualification of base case gross production values as being "30 % too high" must therefore also be rejected. Even though recently revised measurements of the relative 17O/16O isotope ratio difference between VSMOW and Air-O2, 17δVSMOW (Barkan and Luz, 2011, do support lower estimates of gross production, our own measurements disagree with these revised 17δVSMOW values. If scaled for differences in 18

  8. Effect of physical therapy frequency on gross motor function in children with cerebral palsy.

    Science.gov (United States)

    Park, Eun-Young

    2016-06-01

    [Purpose] This study attempted to investigate the effect of physical therapy frequency based on neurodevelopmental therapy on gross motor function in children with cerebral palsy. [Subjects and Methods] The study sample included 161 children with cerebral palsy who attended a convalescent or rehabilitation center for disabled individuals or a special school for children with physical disabilities in South Korea. Gross Motor Function Measure data were collected according to physical therapy frequency based on neurodevelopmental therapy for a period of 1 year. [Results] The correlation between physical therapy frequency and Gross Motor Function Measure scores for crawling and kneeling, standing, walking, running and jumping, and rolling, and the Gross Motor Function Measure total score was significant. The differences in gross motor function according to physical therapy frequency were significant for crawling, kneeling, standing, and Gross Motor Function Measure total score. The differences in gross motor function according to frequency of physical therapy were significant for standing in Gross Motor Function Classification System Level V. [Conclusion] Intensive physical therapy was more effective for improving gross motor function in children with cerebral palsy. In particular, crawling and kneeling, and standing ability showed greater increases with intensive physical therapy.

  9. Effect of physical therapy frequency on gross motor function in children with cerebral palsy

    Science.gov (United States)

    Park, Eun-Young

    2016-01-01

    [Purpose] This study attempted to investigate the effect of physical therapy frequency based on neurodevelopmental therapy on gross motor function in children with cerebral palsy. [Subjects and Methods] The study sample included 161 children with cerebral palsy who attended a convalescent or rehabilitation center for disabled individuals or a special school for children with physical disabilities in South Korea. Gross Motor Function Measure data were collected according to physical therapy frequency based on neurodevelopmental therapy for a period of 1 year. [Results] The correlation between physical therapy frequency and Gross Motor Function Measure scores for crawling and kneeling, standing, walking, running and jumping, and rolling, and the Gross Motor Function Measure total score was significant. The differences in gross motor function according to physical therapy frequency were significant for crawling, kneeling, standing, and Gross Motor Function Measure total score. The differences in gross motor function according to frequency of physical therapy were significant for standing in Gross Motor Function Classification System Level V. [Conclusion] Intensive physical therapy was more effective for improving gross motor function in children with cerebral palsy. In particular, crawling and kneeling, and standing ability showed greater increases with intensive physical therapy. PMID:27390440

  10. Numerical Analysis for Precision Roll Forging of Front Axle%前轴精密辊锻成形过程的数值分析

    Institute of Scientific and Technical Information of China (English)

    郑明玉; 喻建军; 沙奔; 陈池; 陈文琳

    2012-01-01

    The three passes roll forging process was simulated for front axle by using the rigid-plastic finite element model. The transformation law of blank, the roll forging torque and the effective stress distribution were analyzed during the three passes roll forging process. The result of the simulation has important significance for guiding the practical production and improving the level of die design.%采用刚塑性有限元模型对前轴辊锻3道次进行了有限元模拟,分析了辊锻过程中坯料的变化规律、等效应力分布及辊锻力矩的变化规律.模拟结果对于指导实际生产,提高模具设计水平具有重要意义.

  11. Extended-Kalman-filter-based regenerative and friction blended braking control for electric vehicle equipped with axle motor considering damping and elastic properties of electric powertrain

    Science.gov (United States)

    Lv, Chen; Zhang, Junzhi; Li, Yutong

    2014-11-01

    Because of the damping and elastic properties of an electrified powertrain, the regenerative brake of an electric vehicle (EV) is very different from a conventional friction brake with respect to the system dynamics. The flexibility of an electric drivetrain would have a negative effect on the blended brake control performance. In this study, models of the powertrain system of an electric car equipped with an axle motor are developed. Based on these models, the transfer characteristics of the motor torque in the driveline and its effect on blended braking control performance are analysed. To further enhance a vehicle's brake performance and energy efficiency, blended braking control algorithms with compensation for the powertrain flexibility are proposed using an extended Kalman filter. These algorithms are simulated under normal deceleration braking. The results show that the brake performance and blended braking control accuracy of the vehicle are significantly enhanced by the newly proposed algorithms.

  12. 联合收割机行走半轴载荷测试系统构建与性能试验%Construction and performance experiment of load test system for half axle of combine harvester

    Institute of Scientific and Technical Information of China (English)

    李耀明; 叶晓飞; 徐立章; 庞靖; 马征

    2013-01-01

    Half axle is an important part of a walking system in a combine harvester;the damage from half axle is generally fatigue failure, which has a direct effect on the reliability and stability of the combine harvester. Minority combine harvester manufacturers have half axle fatigue test rigs, and most of the loads on the fatigue test rig are set artificially, thus it cannot accurately predict fatigue life of half axle in absence of comprehensive consideration of various alternating loads. Fatigue life analysis and fast in doors simulation of the load fatigue test on the basis of load spectrum can provide the basis for the improvement of half axle. Improvement of fatigue performance of half axle is conducive to the competitiveness of the products on the market at home and abroad. It is not a suitable solution to use traditional shaft or disc torque sensors to test the torque of half axle, because the half axle is closed in the transmission. Operating environments of combine harvesters are complex, and half axles often bear a complex alternating load which puts forward higher requirements on the stability and reliability of the performance of the load test system. To provide a precise and comprehensive load-time course for the compiling of load spectrum of the half axle of a combine harvester, the complex and alternating load signal in typical working conditions must be acquired accurately. Based on an analysis of working characteristics and the construction features of chassis of combine harvesters, a wireless load test system was put forward in this paper by choosing reasonable torque and rotation speed sensors and data acquisition systems composed of hall sensors, rotation speed signal acquisition modules, resistance strain gauges, power modules, torque signal acquisition modules, wireless routers, computers, and software for signals test and analysis. In order to exclude the influence of measured value of torque signals by bending moment, axial force, and temperature

  13. 拖拉机前桥悬架参数匹配及其对振动特性的影响%Front axle suspension parameters match and its impact on vibration characteristics of tractor

    Institute of Scientific and Technical Information of China (English)

    伊力达尔·伊力亚斯; 朱思洪; 徐刚; 袁加奇

    2015-01-01

    Compared with cars, buses and trucks, tractor often drives on the dirt road in the field of rural areas, together with the simple vibration damping device, so the vibration of tractor is particularly intense. Severe vibration of tractor would cause serious harm to driver’s health, and cause fatigue and failure of tractor parts and hence seriously affect the life of the tractor. In addition, excessive vibration of the tractor will exacerbate farmland soil compaction and reduce crop yields. How to effectively reduce the vibration of tractors to improve ride comfort and driving safety and reduce farmland damage is an important research topic for researchers and tractor manufacturing enterprises. The study of foreign scholars have found when the tractor is installed with front axle suspension, the ride comfort and driving safety is improved. When farm tools hangs on the front of tractor, tractor damping effect depends on the matching between front axle suspension stiffness and damping coefficient. Installing the front axle suspension of tractor can significantly reduce tractor’s pitching vibration. By the method of theoretical analysis, the theoretical system of front axle suspension of tractor was established, the vibration was analyzed and the theoretical formula was deduced, aiming to provide a theoretical basis for parameter matching of tractor front axle suspension. In this paper, CF700 tractor from Jiang Su Chang-Fa group was taken as the research object, and the theoretical model of front axle suspension tractor was established, including plane vibration model of front axle suspension tractor with 3 degrees of freedom, vibration differential equation and tractor vibration characteristics evaluation. Taking body vertical vibration acceleration, body pitching vibration angular acceleration, seat-mounted vertical vibration acceleration, front and rear wheels’ dynamic load and front axle suspension dynamic deflection as the evaluation means, theoretical

  14. Assessment outcomes: computerized instruction in a human gross anatomy course.

    Science.gov (United States)

    Bukowski, Elaine L

    2002-01-01

    New and traditional educational media were used to study alternative methods of instruction in a human gross anatomy course. Three consecutive entry-level physical therapy (PT) classes (55 students total) participated in this study. No other anatomy course was available to these students during this time. During the first year, all entering PT students (n = 18) completed a traditional cadaver anatomy course. This traditional group attended weekly lectures and dissection laboratories for 15 weeks. During the second year, the next entering class of PT students (n = 17) completed a self-study, computerized noncadaver anatomy course. This self-study group attended an introductory session to receive course objectives and instruction in using the computer package chosen for the study. After the introductory session, this group worked independently for the remainder of their 15-week course. During the third year, the entering class of PT students (n = 20) attended weekly lectures and completed a self-study, computerized non-cadaver laboratory course. This lecture and self-study group attended an introductory session to review course objectives and receive instruction in using the computer package. For the remainder of their 15-week course, this group attended a weekly lecture and worked independently on the computer for the laboratory portion of their course. All groups kept time logs, recording class and study time for each day of the course. The time logs were collected on the last day of each course. Each group's performance in anatomy-based system courses was followed through the remainder of the PT curricula, including clinical rotations, and through the completion of the state board licensure examination. Data were analyzed using a multivariate analysis of variance and a Kruskal-Wallis analysis of variance. There was no significant difference in anatomy course class means, class study times, performance throughout the remainder of the PT curricula, and performance

  15. World distribution of gross domestic product per-capita

    Science.gov (United States)

    Bustos-Guajardo, R.; Moukarzel, Cristian F.

    2015-05-01

    It is shown that the world distribution of gross domestic products per capita (GDPpc) is well described by a trade-investment model that combines yard-sale (YS) exchange and random multiplicative noise (RMN). We first derive analytically the typical value w(r, t) of the ranked wealths for a system evolving under YS exchange and RMN. The resulting analytical expressions are fitted to data for the GDPpc of up to 200 countries, in the period 1960-2013. Our model fits the data significantly better than previously proposed approaches that consider either Noise or Trade alone. Analysis of the resulting values for the fitting parameters, and of their time dependence, suggests that: (a) International trade conditions have (from 1960 to 2008) a statistical bias towards favoring richer countries. (b) Biased international commerce is the main cause for the observed divergence of GDPpc values from 1960 to 2008. (c) After 2008, the distribution of GDPpc starts to converge, and the world product per capita stops growing.

  16. Progestogen-related gross and microscopic changes in female Beagles.

    Science.gov (United States)

    Nelson, L W; Kelly, W A

    1976-01-01

    Long-term studies of megestrol acetate and chlormadinone acetate in 100 female dogs are in progress. Doses of zero, one, 10 and 25 times the expected human dose of megestrol acetate and 25 times the expected human dose of chlormadinone acetate (on a milligram per kilogram body weight basis) are being given daily. During the first 4 years, eight dogs from each of the five groups were killed. The principal gross findings included enlarged uteri with mucoid material in the lumina, mammary development in dogs given middle and high doses of megestrol acetate and chlormadinone acetate, and thickened gallbladder walls in dogs given high doses of each. Histologic evaluation showed inhibition of ovulation for progestogen-treated dogs and suppression of ovarian follicular development with the high doses. Cystic endometrial hyperplasia was slight in the low-dose dogs and moderate to severe in most of the high-dose dogs; a few also had ulcerative endometritis and pyometra. The mammary glands of dogs given the middle and high doses produced lobules, acini, and secretion exceeding natural metestrus. Slight to marked cystic mucinous hyperplasia occurred in the gallbladders of most dogs given the high doses. Tow high-dose megestrol dogs had clinical signs and microscopic pancreatic, renal, and ocular changes indicative of diabetes mellitus.

  17. Stratospheric sulfate geoengineering enhances terrestrial gross primary productivity

    Science.gov (United States)

    Xia, L.; Robock, A.; Tilmes, S.; Neely, R. R., III

    2015-09-01

    Stratospheric sulfate geoengineering could impact the terrestrial carbon cycle by enhancing the carbon sink. With an 8 Tg yr-1 injection of SO2 to balance a Representative Concentration Pathway 6.0 (RCP6.0) scenario, we conducted climate model simulations with the Community Earth System Model, with the Community Atmospheric Model 4 fully coupled to tropospheric and stratospheric chemistry (CAM4-chem). During the geoengineering period, as compared to RCP6.0, land-averaged downward visible diffuse radiation increased 3.2 W m-2 (11 %). The enhanced diffuse radiation combined with the cooling increased plant photosynthesis by 2.4 %, which could contribute to an additional 3.8 ± 1.1 Gt C yr-1 global gross primary productivity without nutrient limitation. This increase could potentially increase the land carbon sink. Suppressed plant and soil respiration due to the cooling would reduce natural land carbon emission and therefore further enhance the terrestrial carbon sink during the geoengineering period. This beneficial impact of stratospheric sulfate geoengineering would need to be balanced by a large number of potential risks in any future decisions about implementation of geoengineering.

  18. Stratospheric sulfate geoengineering enhances terrestrial gross primary productivity

    Directory of Open Access Journals (Sweden)

    L. Xia

    2015-09-01

    Full Text Available Stratospheric sulfate geoengineering could impact the terrestrial carbon cycle by enhancing the carbon sink. With an 8 Tg yr−1 injection of SO2 to balance a Representative Concentration Pathway 6.0 (RCP6.0 scenario, we conducted climate model simulations with the Community Earth System Model, with the Community Atmospheric Model 4 fully coupled to tropospheric and stratospheric chemistry (CAM4-chem. During the geoengineering period, as compared to RCP6.0, land-averaged downward visible diffuse radiation increased 3.2 W m−2 (11 %. The enhanced diffuse radiation combined with the cooling increased plant photosynthesis by 2.4 %, which could contribute to an additional 3.8 ± 1.1 Gt C yr−1 global gross primary productivity without nutrient limitation. This increase could potentially increase the land carbon sink. Suppressed plant and soil respiration due to the cooling would reduce natural land carbon emission and therefore further enhance the terrestrial carbon sink during the geoengineering period. This beneficial impact of stratospheric sulfate geoengineering would need to be balanced by a large number of potential risks in any future decisions about implementation of geoengineering.

  19. Horava-Lifshitz-like Gross-Neveu model

    Science.gov (United States)

    Lima, A. M.; Mariz, T.; Martinez, R.; Nascimento, J. R.; Petrov, A. Yu.; Ribeiro, R. F.

    2017-03-01

    We describe a Horava-Lifshitz-like reformulated four-fermion Gross-Neveu model describing the dynamics of two-component spinors in (2 +1 )-dimensional space-time. Within our study, we introduce the Lagrange multiplier, study the gap equation (including the finite temperature case) which turns out to display essentially distinct behaviors for even and odd values of the critical exponent z , and show that the dynamical parity breaking occurs only for the odd z . We demonstrate that for any odd z , there exists a critical temperature at which the dynamical parity breaking disappears. Besides of this, we obtain the effective propagator and show that the resulting effective theory is renormalizable within the framework of the 1/N expansion for all values of z . As one more application of the dynamical parity breaking, we consider coupling of the vector field to the fermions in the case of a simplified spinor-vector coupling and discuss the generation of the Chern-Simons term.

  20. Large historical growth in global terrestrial gross primary production

    Science.gov (United States)

    Campbell, J. E.; Berry, J. A.; Seibt, U.; Smith, S. J.; Montzka, S. A.; Launois, T.; Belviso, S.; Bopp, L.; Laine, M.

    2017-04-01

    Growth in terrestrial gross primary production (GPP)—the amount of carbon dioxide that is ‘fixed’ into organic material through the photosynthesis of land plants—may provide a negative feedback for climate change. It remains uncertain, however, to what extent biogeochemical processes can suppress global GPP growth. As a consequence, modelling estimates of terrestrial carbon storage, and of feedbacks between the carbon cycle and climate, remain poorly constrained. Here we present a global, measurement-based estimate of GPP growth during the twentieth century that is based on long-term atmospheric carbonyl sulfide (COS) records, derived from ice-core, firn and ambient air samples. We interpret these records using a model that simulates changes in COS concentration according to changes in its sources and sinks—including a large sink that is related to GPP. We find that the observation-based COS record is most consistent with simulations of climate and the carbon cycle that assume large GPP growth during the twentieth century (31% ± 5% growth; mean ± 95% confidence interval). Although this COS analysis does not directly constrain models of future GPP growth, it does provide a global-scale benchmark for historical carbon-cycle simulations.

  1. Large historical growth in global terrestrial gross primary production

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J. E.; Berry, J. A.; Seibt, U.; Smith, S. J.; Montzka, S. A.; Launois, T.; Belviso, S.; Bopp, L.; Laine, M.

    2017-04-05

    Growth in terrestrial gross primary production (GPP) may provide a feedback for climate change, but there is still strong disagreement on the extent to which biogeochemical processes may suppress this GPP growth at the ecosystem to continental scales. The consequent uncertainty in modeling of future carbon storage by the terrestrial biosphere constitutes one of the largest unknowns in global climate projections for the next century. Here we provide a global, measurement-based estimate of historical GPP growth using long-term atmospheric carbonyl sulfide (COS) records derived from ice core, firn, and ambient air samples. We interpret these records using a model that relates changes in the COS concentration to changes in its sources and sinks, the largest of which is proportional to GPP. The COS history was most consistent with simulations that assume a large historical GPP growth. Carbon-climate models that assume little to no GPP growth predicted trajectories of COS concentration over the anthropogenic era that differ from those observed. Continued COS monitoring may be useful for detecting ongoing changes in GPP while extending the ice core record to glacial cycles could provide further opportunities to evaluate earth system models.

  2. A boy with fever, cough and gross haematuria.

    Science.gov (United States)

    Cozzi, Giorgio; Maschio, Massimo; Poillucci, Gabriele; Pennesi, Marco; Barbi, Egidio

    2017-08-28

    A 5 year-old boy presented with 2-days of fever and cough. On examination, he had mild dyspnoea and chest pain, with crackles and hypoventilation at the right lung base. Blood tests showed: WBC 39.1×10(9)/L; N 28.9×10(9)/L; Hb 11.3gr/dL; PLT 375×10(9)/L; CRP 28.7mg/dL; ESR 41mm/h. Chest x-ray confirmed a pulmonary consolidation in the right lower lobe (figure 1), with an associated pleural effusion. Bacterial pneumonia was diagnosed and intravenous ceftriaxone 100mg/kg/die was started. The following day, he developed palpebral oedema and his urine became tea coloured. His blood pressure was 126/82mmHg (>99th percentile).(1) Serum creatinine rose from 0.45mg/dl to 1.09mg/dl (39.8µmol/L - 93.4µmol/L) and C3 was 9mg/dl (n.r. 90-180mg/dl). Urinalysis revealed gross hematuria and 3+ proteinuria, with microscopicy showing dysmorphic red blood cells with casts. Ultrasounds showed enlarged kidneys with increased echogenicity. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  3. Peer-Assisted Learning in a Gross Anatomy Dissection Course.

    Science.gov (United States)

    Han, Eui-Ryoung; Chung, Eun-Kyung; Nam, Kwang-Il

    2015-01-01

    Peer-assisted learning encourages students to participate more actively in the dissection process and promotes thoughtful dissection. We implemented peer-assisted dissection in 2012 and compared its effects on students' self-assessments of learning and their academic achievement with those of faculty-led dissection. All subjects performed dissections after a lecture about upper-limb gross anatomy. Experimental group (n = 134) dissected a cadaver while guided by peer tutors who had prepared for the dissection in advance, and control group (n = 71) dissected a cadaver after the introduction by a faculty via prosection. Self-assessment scores regarding the learning objectives related to upper limbs were significantly higher in experimental group than in control group. Additionally, experimental group received significantly higher academic scores than did control group. The students in peer-assisted learning perceived themselves as having a better understanding of course content and achieved better academic results compared with those who participated in faculty-led dissection. Peer-assisted dissection contributed to self-perception and to the ability to retain and explain anatomical knowledge.

  4. 重型牵引车驱动桥壳厚度及板簧中心距的优化%Optimum Design on Thickness of Heavy Tractor’ s Driving Axle Housing and Leaf Spring Center Distance

    Institute of Scientific and Technical Information of China (English)

    徐杨坤; 李晚霞; 杨灿

    2015-01-01

    A parameterized finite element model of heavy tractor driving axle housing was established, using APDL program-ming language in the finite element analysis software ANSYS.Through optimum design on the thickness of the main body of the driving axle housing and the axle shaft sleeve, the weight of driving axle housing was reduced while its strength was increased, which provides a basis for lightweight design.Through optimum design about leaf spring center distance under the maximum verti-cal force working condition and the braking working condition, the curves of the maximum stress and deformation versus spring center distance were obtained respectively;and the optimum leaf spring center distances under the maximum vertical force condi-tion was determined.The driving axle housing met the strength and stiffness requirements in that rang of leaf spring center dis-tances.The model provides a basis for the design of the driving axle housing and the arrangement of the leaf spring seat.%采用有限元分析软件ANSYS中的APDL编程语言建立了重型牵引车驱动桥壳的参数化有限元模型,通过对桥壳本体厚度、半轴套管厚度进行优化设计,减轻了驱动桥壳的质量并增大了其强度,为轻量化设计提供了依据;分别在最大垂向力工况和制动工况下对板簧中心距进行优化设计,得到了驱动桥壳最大应力和最大变形随板簧中心距变化的曲线,确定了在最大垂向力工况下的最佳板簧中心距,在该板簧中心距范围内,驱动桥壳在制动工况下满足强度刚度要求,为驱动桥壳的设计和板簧座的布置提供了依据。

  5. 20 CFR 418.1115 - What are the modified adjusted gross income ranges?

    Science.gov (United States)

    2010-04-01

    ... gross income range amounts by any percentage increase in the Consumer Price Index rounded to the nearest...) of this section. We will use your modified adjusted gross income amount together with your tax filing... from his/her spouse for the entire tax year for the year we use to make our income-related...

  6. Balloon-occluded percutaneous transheptic obliteration of isolated vesical varices causing gross hematuria

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Dong Hoon; Kim, Dong Hyun; Kim, Min Seok; Kim, Chul Sung [Department of Urology, College of Medicine, Chosun University, Gwangju (Korea, Republic of)

    2013-01-15

    Gross hematuria secondary to vesical varices is an unusual presentation. We report such a case recurrent gross hematuria in a male patient who had a history of bladder substitution with ileal segments that had been treated by balloon-occluded percutaneous transhepatic obliteration of vesical varices.

  7. De Gross Motor Function Measure (GMFM): een onderzoek naar de responsiviteit van de Nederlandse vertaling.

    NARCIS (Netherlands)

    Veenhof, C.; Ketelaar, M.; Petegem-van Beek, E. van; Vermeer, A.

    2003-01-01

    This article is about the psychometric characteristics of the Dutch translation of the Gross Motor Function Measure (GMFM). It describes the responsiveness to change. The article "Gross Motor Function Measure (GMFM): a reliability study of the Dutch translation" focuses on the reliability of the GMF

  8. De Gross Motor Function Measure (GMFM): een onderzoek naar de betrouwbaarheid van de Nederlandse vertaling.

    NARCIS (Netherlands)

    Veenhof, C.; Ketelaar, M.; Petegem-van Beek, E. van

    2003-01-01

    This article is about the psychometric characteristics of the Dutch translation of the Gross Motor Function Measure (GMFM). It describes the reliability of the instrument. The article "Gross Motor Function Measure" (GMFM): a validity study of the Dutch translation focusses on the responsiveness of t

  9. Brief Assessment of Motor Function: Content Validity and Reliability of the Upper Extremity Gross Motor Scale

    Science.gov (United States)

    Cintas, Holly Lea; Parks, Rebecca; Don, Sarah; Gerber, Lynn

    2011-01-01

    Content validity and reliability of the Brief Assessment of Motor Function (BAMF) Upper Extremity Gross Motor Scale (UEGMS) were evaluated in this prospective, descriptive study. The UEGMS is one of five BAMF ordinal scales designed for quick documentation of gross, fine, and oral motor skill levels. Designed to be independent of age and…

  10. Fixed Point of Generalized Eventual Cyclic Gross in Fuzzy Norm Spaces for Contractive Mappings

    Directory of Open Access Journals (Sweden)

    S. A. M. Mohsenialhosseini

    2015-01-01

    Full Text Available We define generalized eventual cyclic gross contractive mapping in fuzzy norm spaces, which is a generalization of the eventual cyclic gross contractions. Also we prove the existence of a fixed point for this type of contractive mapping on fuzzy norm spaces.

  11. 46 CFR 129.315 - Power sources for OSVs of 100 or more gross tons.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Power sources for OSVs of 100 or more gross tons. 129.315 Section 129.315 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS Power Sources and Distribution Systems § 129.315 Power sources for OSVs of 100 or more gross tons. (a) The...

  12. Combined climate factors alleviate changes in gross soil nitrogen dynamics in heathlands

    DEFF Research Database (Denmark)

    Bjorsne, Anna-Karin; Rutting, Tobias; Ambus, Per

    2014-01-01

    of exposure to three climate change factors, i.e. warming, elevated CO2 (eCO(2)) and summer drought, applied both in isolation and in combination. By conducting laboratory N-15 tracing experiments we show that warming increased both gross N mineralization and nitrification rates. In contrast, gross...

  13. 26 CFR 1.1332-1 - Inclusion in gross income of war loss recoveries.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Inclusion in gross income of war loss recoveries. 1.1332-1 Section 1.1332-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES War Loss Recoveries § 1.1332-1 Inclusion in gross income of...

  14. Comparison of Gross Anatomy Test Scores Using Traditional Specimens vs. Quicktime Virtual Reality Animated Specimens

    Science.gov (United States)

    Maza, Paul Sadiri

    2010-01-01

    In recent years, technological advances such as computers have been employed in teaching gross anatomy at all levels of education, even in professional schools such as medical and veterinary medical colleges. Benefits of computer based instructional tools for gross anatomy include the convenience of not having to physically view or dissect a…

  15. The Effects of Basketball Basic Skills Training on Gross Motor Skills Development of Female Children

    Science.gov (United States)

    Bayazit, Betul

    2015-01-01

    The purpose of this study was to investigate the effects of basketball basic skills training on gross motor skills development of female children in Turkey. For that purpose, 40 female children took part in the study voluntarily. Basketball basic skills test was used to improve the gross motor skills of the female children in the study. Also,…

  16. The Effects of Basketball Basic Skills Training on Gross Motor Skills Development of Female Children

    Science.gov (United States)

    Bayazit, Betul

    2015-01-01

    The purpose of this study was to investigate the effects of basketball basic skills training on gross motor skills development of female children in Turkey. For that purpose, 40 female children took part in the study voluntarily. Basketball basic skills test was used to improve the gross motor skills of the female children in the study. Also,…

  17. 25 CFR 215.21 - Payment of gross production tax on lead and zinc.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Payment of gross production tax on lead and zinc. 215.21... ZINC MINING OPERATIONS AND LEASES, QUAPAW AGENCY § 215.21 Payment of gross production tax on lead and zinc. The superintendent of the Quapaw Indian Agency is hereby authorized and directed to pay at...

  18. 26 CFR 1.61-3 - Gross income derived from business.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Gross income derived from business. 1.61-3 Section 1.61-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME... Taxable Income § 1.61-3 Gross income derived from business. (a) In general. In a...

  19. 26 CFR 1.804-3 - Gross investment income of a life insurance company.

    Science.gov (United States)

    2010-04-01

    ... law) shall be excluded from the gross investment income of a life insurance company. However, section... company. 1.804-3 Section 1.804-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... insurance company. (a) Gross investment income defined. For purposes of part I, subchapter L, chapter 1 of...

  20. 17 CFR 1.58 - Gross collection of exchange-set margins.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Gross collection of exchange-set margins. 1.58 Section 1.58 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT Miscellaneous § 1.58 Gross collection of exchange-set...

  1. Comparison of Gross Anatomy Test Scores Using Traditional Specimens vs. Quicktime Virtual Reality Animated Specimens

    Science.gov (United States)

    Maza, Paul Sadiri

    2010-01-01

    In recent years, technological advances such as computers have been employed in teaching gross anatomy at all levels of education, even in professional schools such as medical and veterinary medical colleges. Benefits of computer based instructional tools for gross anatomy include the convenience of not having to physically view or dissect a…

  2. Gross Motor Development of Malaysian Hearing Impaired Male Pre- and Early School Children

    Science.gov (United States)

    Zawi, Khairi; Lian, Denise Koh Choon; Abdullah, Rozlina Tan

    2014-01-01

    Acquisition of gross motor skill is a natural developmental process for children. This aspect of human development increases with one's chronological age, irrespective of any developmental conditions. The purpose of this study was to assess the level of gross motor skill development among pre- and early school-aged children with motor disability.…

  3. Confirmatory Factor Analysis of the Test of Gross Motor Development-2

    Science.gov (United States)

    Wong, Ka Yee Allison; Cheung, Siu Yin

    2010-01-01

    The purpose of this study was to examine the underlying structure of the second edition of the Test of Gross Motor Development-2 (Ulrich, 2000) as applied to Chinese children. The Test of Gross Motor Development-2 was administered to 626 Hong Kong Chinese children. The outlier test with standard scoring was utilized. After data screening, a total…

  4. Developmental and physical-fitness associations with gross motor coordination problems in Peruvian children.

    Science.gov (United States)

    de Chaves, Raquel Nichele; Bustamante Valdívia, Alcibíades; Nevill, Alan; Freitas, Duarte; Tani, Go; Katzmarzyk, Peter T; Maia, José António Ribeiro

    2016-01-01

    The aims of this cross-sectional study were to examine the developmental characteristics (biological maturation and body size) associated with gross motor coordination problems in 5193 Peruvian children (2787 girls) aged 6-14 years from different geographical locations, and to investigate how the probability that children suffer with gross motor coordination problems varies with physical fitness. Children with gross motor coordination problems were more likely to have lower flexibility and explosive strength levels, having adjusted for age, sex, maturation and study site. Older children were more likely to suffer from gross motor coordination problems, as were those with greater body mass index. However, more mature children were less likely to have gross motor coordination problems, although children who live at sea level or at high altitude were more likely to suffer from gross motor coordination problems than children living in the jungle. Our results provide evidence that children and adolescents with lower physical fitness are more likely to have gross motor coordination difficulties. The identification of youths with gross motor coordination problems and providing them with effective intervention programs is an important priority in order to overcome such developmental problems, and help to improve their general health status.

  5. Can Clinical Assessment of Locomotive Body Function Explain Gross Motor Environmental Performance in Cerebral Palsy?

    Science.gov (United States)

    Sanz Mengibar, Jose Manuel; Santonja-Medina, Fernando; Sanchez-de-Muniain, Paloma; Canteras-Jordana, Manuel

    2016-03-01

    Gross Motor Function Classification System has discriminative purposes but does not assess short-term therapy goals. Locomotion Stages (LS) classify postural body functions and independent activity components. Assessing the relation between Gross Motor Function Classification System level and Locomotion Stages will make us understand if clinical assessment can explain and predict motor environmental performance in cerebral palsy. A total of 462 children were assessed with both scales. High reliability and strong negative correlation (-0.908) for Gross Motor Function Classification System and Locomotion Stages at any age was found. Sensitivity was 83%, and specificity and positive predictive value were 100% within the same age range. Regression analysis showed detailed probabilities for the realization of the Gross Motor Function Classification System depending on the Locomotion Stages and the age group. Postural body function measure with Locomotion Stages is reliable, sensitive, and specific for gross motor function and able to predict environmental performance.

  6. The effects of training on gross efficiency in cycling: a review.

    Science.gov (United States)

    Hopker, J; Passfield, L; Coleman, D; Jobson, S; Edwards, L; Carter, H

    2009-12-01

    There has been much debate in the recent scientific literature regarding the possible ability to increase gross efficiency in cycling via training. Using cross-sectional study designs, researchers have demonstrated no significant differences in gross efficiency between trained and untrained cyclists. Reviewing this literature provides evidence to suggest that methodological inadequacies may have played a crucial role in the conclusions drawn from the majority of these studies. We present an overview of these studies and their relative shortcomings and conclude that in well-controlled and rigorously designed studies, training has a positive influence upon gross efficiency. Putative mechanisms for the increase in gross efficiency as a result of training include, muscle fibre type transformation, changes to muscle fibre shortening velocities and changes within the mitochondria. However, the specific mechanisms by which training improves gross efficiency and their impact on cycling performance remain to be determined.

  7. Gross Nitrogen Mineralization in Surface Sediments of the Yangtze Estuary.

    Science.gov (United States)

    Lin, Xianbiao; Hou, Lijun; Liu, Min; Li, Xiaofei; Yin, Guoyu; Zheng, Yanling; Deng, Fengyu

    2016-01-01

    Nitrogen mineralization is a key biogeochemical process transforming organic nitrogen to inorganic nitrogen in estuarine and coastal sediments. Although sedimentary nitrogen mineralization is an important internal driver for aquatic eutrophication, few studies have investigated sedimentary nitrogen mineralization in these environments. Sediment-slurry incubation experiments combined with 15N isotope dilution technique were conducted to quantify the potential rates of nitrogen mineralization in surface sediments of the Yangtze Estuary. The gross nitrogen mineralization (GNM) rates ranged from 0.02 to 5.13 mg N kg(-1) d(-1) in surface sediments of the study area. The GNM rates were generally higher in summer than in winter, and the relative high rates were detected mainly at sites near the north branch and frontal edge of this estuary. The spatial and temporal distributions of GNM rates were observed to depend largely on temperature, salinity, sedimentary organic carbon and nitrogen contents, and extracellular enzyme (urease and L-glutaminase) activities. The total mineralized nitrogen in the sediments of the Yangtze Estuary was estimated to be about 6.17 × 10(5) t N yr(-1), and approximately 37% of it was retained in the estuary. Assuming the retained mineralized nitrogen is totally released from the sediments into the water column, which contributed 12-15% of total dissolved inorganic nitrogen (DIN) sources in this study area. This result indicated that the mineralization process is a significant internal nitrogen source for the overlying water of the Yangtze Estuary, and thus may contribute to the estuarine and coastal eutrophication.

  8. Gross Nitrogen Mineralization in Surface Sediments of the Yangtze Estuary.

    Directory of Open Access Journals (Sweden)

    Xianbiao Lin

    Full Text Available Nitrogen mineralization is a key biogeochemical process transforming organic nitrogen to inorganic nitrogen in estuarine and coastal sediments. Although sedimentary nitrogen mineralization is an important internal driver for aquatic eutrophication, few studies have investigated sedimentary nitrogen mineralization in these environments. Sediment-slurry incubation experiments combined with 15N isotope dilution technique were conducted to quantify the potential rates of nitrogen mineralization in surface sediments of the Yangtze Estuary. The gross nitrogen mineralization (GNM rates ranged from 0.02 to 5.13 mg N kg(-1 d(-1 in surface sediments of the study area. The GNM rates were generally higher in summer than in winter, and the relative high rates were detected mainly at sites near the north branch and frontal edge of this estuary. The spatial and temporal distributions of GNM rates were observed to depend largely on temperature, salinity, sedimentary organic carbon and nitrogen contents, and extracellular enzyme (urease and L-glutaminase activities. The total mineralized nitrogen in the sediments of the Yangtze Estuary was estimated to be about 6.17 × 10(5 t N yr(-1, and approximately 37% of it was retained in the estuary. Assuming the retained mineralized nitrogen is totally released from the sediments into the water column, which contributed 12-15% of total dissolved inorganic nitrogen (DIN sources in this study area. This result indicated that the mineralization process is a significant internal nitrogen source for the overlying water of the Yangtze Estuary, and thus may contribute to the estuarine and coastal eutrophication.

  9. GROSS ANATOMY AND BLOOD SUPPLY OF SMALL INTESTINE IN FOETUSES

    Directory of Open Access Journals (Sweden)

    Anwer Unisa

    2015-06-01

    Full Text Available AIM OF STUDY: To develop charts of length and width of small intestine, origin, length and branching pattern of celiac trunk and Superior mesenteric artery. This will help us to know any congenital anomaly in the small intestine, and abnormal origin, length, variation i n the branching pattern. MATERIALS AND METHOD S: The material used for the present study of 100 foetuses of different stages of gestation collected from Government maternity Hospital, Hanamkonda, ChandaKantha Memorial Hospital Warangal and private nursing h omes of Warangal D istrict of Andhra Pradesh within 10 hours of death. The dead foetuses were preserved in the hospital in 10% formalin. The foetuses were embalmed by injecting with 20 cc to 100 cc 10% formalin in to the cranial cavity and trunk depending o n the stage of gestation. Foetuses were dissected to expose small intestine and the blood vessels which supply it systematically in the following manner. OBSERVATIONS: The present study conducted has shown that length, width of small intestine was found to be increasing with foetal age. The length of celiac trunk, the length of superior mesenteric artery was found to increase proportionality with the foetal age. The causes of death in foetuses related to small intestine are intussusceptions intestional malr otation such as ladd’s bands, volvulus, cystic fibrosis, intestional infections and necrotizing enterocolitis. Knowledge related to gross anatomy and blood supply of small intestine is important because of these causes which may lead to death in foetus e s. In the present study no anomalies related to small intestine are found.

  10. Extreme events in gross primary production: a characterization across continents

    Directory of Open Access Journals (Sweden)

    J. Zscheischler

    2014-01-01

    Full Text Available Climate extremes can affect the functioning of terrestrial ecosystems, for instance via a reduction of the photosynthetic capacity or alterations of respiratory processes. Yet the dominant regional and seasonal effects of hydrometeorological extremes are still not well documented. Here we quantify and characterize the role of large spatiotemporal extreme events in gross primary production (GPP as triggers of continental anomalies. We also investigate seasonal dynamics of extreme impacts on continental GPP anomalies. We find that the 50 largest positive (increase in uptake and negative extremes (decrease in uptake on each continent can explain most of the continental variation in GPP, which is in line with previous results obtained at the global scale. We show that negative extremes are larger than positive ones and demonstrate that this asymmetry is particularly strong in South America and Europe. Most extremes in GPP start in early summer. Our analysis indicates that the overall impacts and the spatial extents of GPP extremes are power law distributed with exponents that vary little across continents. Moreover, we show that on all continents and for all data sets the spatial extents play a more important role than durations or maximal GPP anomaly when it comes to the overall impact of GPP extremes. An analysis of possible causes implies that across continents most extremes in GPP can best be explained by water scarcity rather than by extreme temperatures. However, for Europe, South America and Oceania we identify also fire as an important driver. Our findings are consistent with remote sensing products. An independent validation against a literature survey on specific extreme events supports our results to a large extent.

  11. Dynamics of Drive Axle System with Effects of Input Torque%输入转矩对驱动桥系统动力学特性的影响

    Institute of Scientific and Technical Information of China (English)

    周驰; 王琪; 丁炜琦; 桂良进; 范子杰

    2016-01-01

    Driveline and housings are connected by roller bearings. The bearing stiffness is nonlinear and coupling in all directions and changes with the input torque of drive axle, which leads to variation in the drive axle system dynamics. Based on the nonlinear bearing theory, the finite element method and modal synthesis method, a drive axle final drive gear transmission system dynamic model with final drive gear transmission assembly, differential gear transmission assembly, hub assembly and housings etc. is built. According to the magnitude of the input torque of the pinion shaft, the load cases are set out into light load, medium load and heavy load. Nonlinear bearing stiffness is calculated corresponding to each load case. The axial stiffness and radial stiffness of final drive roller bearing with load change characteristics are analyzed. Dynamic analysis of the whole drive axle system to a unit harmonic transmission error at the hypoid gear mesh is performed in the case of different input torques. The influence of the input torque on the drive axle is researched. The frequency response characteristics of final drive hypoid gear dynamic meshing force is analyzed when the drive axle system works in different load cases. The results show that the drive axle system dynamics change with the size of the input torque with a certain regularity, and can guide the design of the vibration and noise reduction of drive axle system in order to avoid dangerous conditions effectively.%在驱动桥系统中,滚子轴承是连接轴系与壳体的关键部件,其刚度具有各向耦合性和非线性特性,且与输入转矩有关。为准确高效地分析输入转矩对驱动桥系统动力学特性的影响,基于非线性轴承理论、有限元法和模态综合方法,建立包含主减速器总成、差速器总成、轮毂总成和桥壳等部件的完整驱动桥系统动力学分析模型,根据输入转矩大小的不同,定义轻载、中载和重载三种

  12. 59/74kW轮式拖拉机前驱动桥桥壳的柔性加工工艺设计%Flexible Manufacturing Process of 59/74 kW Tractor Front Drive Axle Housing

    Institute of Scientific and Technical Information of China (English)

    王智红; 张强; 赵利飞; 周珍珠

    2012-01-01

    针对59/74kw轮式拖拉机前驱动桥壳体,分析了整体式桥壳的结构特点和其主减安装面、转向节孔和半轴轴承座孔的工艺要求,并研究设计了加工工艺。经生产实践证明,该工艺不仅生产效率高,而且产品质量稳定。%For front drive axle housing of 59/74 kW tractors,we analyzed the overall structural features of the integral axle housing and process requirements for main mounting surface, steering knuckle hole and half shaft bearing seat hole. Then the process technics are designed. The productions prove that the process has a high efficiency and stabile product quality.

  13. 汽车驱动桥壳壳盖优化设计二次开发研究%Secondary Development on the Optimization of Drive Axle Housing Cover

    Institute of Scientific and Technical Information of China (English)

    揭钢; 余显忠; 丁玉辉; 万雄飞; 陈田兵

    2011-01-01

    采用非线性有限元分析软件ABAQUS对驱动桥壳壳盖成型过程进行了仿真分析,并通过ABAQUS自带脚本程序Python建立的参数化有限元模型对壳盖的毛坯进行优化循环计算,得出了合理的毛坯尺寸.通过试验验证了优化设计的正确性.%In this paper, the forming process of driving axle housing cover is simulated based on the no-linear finite element analysis software ABAQUS, and optimized cycle calculation was made to axle housing cover blanks with the parameterized FE model established with ABAQUS script Python, and reasonable dimensions of blanks were obtained. The optimized design is validated with test.

  14. 考虑侧偏角影响的双前桥转向角匹配研究%Research on steer angle for double front axles steering systems considering with slip angle

    Institute of Scientific and Technical Information of China (English)

    覃刚; 孙营

    2011-01-01

    研究了双前桥转向系统中,整车的侧向加速度所造成的车轮侧偏角对实际车轮转向角的影响,提出了考虑侧偏角影响时双前桥转向的阿克曼条件.首先推导了存在车轮侧偏角时双前桥各车轮转向角之间的变化规律,提出了包含车轮侧偏角在内的阿克曼转角公式;其次以某双前桥转向的重型卡车为应用对象,将所推导的设计公式应用于该重型卡车的设计中,建立相应的多体动力学模型,借助于Adams软件的仿真分析对各车轮转向角进行了设计;最后通过实车试验验证了经修正后的阿克曼转角公式的正确性.%What the slip angle caused by lateral acceleration has influence on the actual steer angle for double front axles steering system was mainly researched,and the Ackerman law of double front axles considering the influence of slip angle was proposed.Firstly,the variation of each wheel steer angle in double front axles truck considering slip angle was derived,and the Ackerman law containing slip angle was proposed.Secondly,using the proposed theory on a double front axles truck,the multibody dynamics model was built,and the wheel steer angle was designed based on the software Adams.Lastly,the real vehicle experiment validated the correctness of the amended Ackerman law.

  15. Reliability-based optimization of front-axle with non-normal distribution parameters%非正态分布参数前轴的可靠性优化设计

    Institute of Scientific and Technical Information of China (English)

    张义民; 贺向东; 刘巧伶; 闻邦椿

    2003-01-01

    讨论了随机参数服从非正态分布前轴的可靠性优化设计问题.在基本随机参数的前四阶矩已知的情况下,应用随机摄动法和Edgeworth级数方法对前轴进行可靠性优化设计,通过计算机程序可以实现随机参数服从非正态分布的前轴可靠性优化设计,迅速准确地得到了前轴的可靠性优化设计信息.计算结果表明,在对随机参数服从非正态分布的前轴进行可靠性优化设计时,该文所提出的方法有效和实用.%This paper examines the reliability optimization design for front-axle with non-normal distribution parameters. Using techniques from the probabilistic perturbation method and the Edgeworth series technique, a practical and effective method for the reliability optimization design for front-axle with non-normal distribution parameters of vehicle on the condition of known first four moments of basic random variables is presented. The respective program can be used to obtain the reliability optimization design information of front-axle with non-normal distribution parameters accurately and quickly. The numerical results demonstrate that the method proposed is an effective and practical approach to computing reliability and designing front-axle with non-normal distribution parameters.

  16. 大马力拖拉机驱动桥有限元分析及试验研究%Finite element analysis and experiment of big horsepower tractor drive axle

    Institute of Scientific and Technical Information of China (English)

    董玉德; 姚亮亮; 刘振; 曹文钢; 邓磊; 王凯亮; 刘月在

    2012-01-01

    驱动桥作为拖拉机的传动和承载部件,受力较大且使用频繁,通过对桥壳模型的有限元分析,可以验证设计的安全性并可以通过分析结果来改进设计.首先采用Pro/E对拖拉机驱动桥壳、转向节、半轴进行三维建模并导入Hypermesh中进行有限元分析的前处理工作,然后将导出的文件输入ANSYS中进行有限元分析.最后通过桥壳的刚度试验和疲劳试验验证了此驱动桥的安全性,并给出了改进意见.%Drive axle sustains heavy force and is frequently used to transmit power and bear weight of the tractor. Security of design can be verified and improved by the result of the finite element analysis. First, hypermesh is used to proceed the preprocessing of the finite element analysis to axle housing, steering joint, half-axle model which is designed by Pro/E, ANSYS is used to proceed finite element analysis. By the result of the analysis and rigidity experiment, fatigue experiment to housing, the correctness of design can be verified, and some advices are given to increase the rigidity and fatigue lifetime for big horsepower tractor drive axle.

  17. Quenched dynamics of two-dimensional solitons and vortices in the Gross-Pitaevskii equation

    CERN Document Server

    Chen, Qian-Yong; Malomed, Boris A

    2012-01-01

    We consider a two-dimensional (2D) counterpart of the experiment that led to the creation of quasi-1D bright solitons in Bose-Einstein condensates (BECs) [Nature 417, 150--153 (2002)]. We start by identifying the ground state of the 2D Gross-Pitaevskii equation for repulsive interactions, with a harmonic-oscillator (HO) trap, and with or without an optical lattice (OL). Subsequently, we switch the sign of the interaction to induce interatomic attraction and monitor the ensuing dynamics. Regions of the stable self-trapping and catastrophic collapse of 2D fundamental solitons are identified in the parameter plane of the OL strength and BEC norm. The increase of the OL strength expands the persistence domain for the solitons to larger norms. For single-charged solitary vortices, in addition to the survival and collapse regimes, an intermediate one is identified, where the vortex resists the collapse but loses its structure, transforming into a fundamental soliton. The same setting may also be implemented in the ...

  18. Impact of disaster-related mortality on gross domestic product in the WHO African Region

    Directory of Open Access Journals (Sweden)

    Aldis William

    2004-03-01

    Full Text Available Abstract Background Disaster-related mortality is a growing public health concern in the African Region. These deaths are hypothesized to have a significantly negative effect on per capita gross domestic product (GDP. The objective of this study was to estimate the loss in GDP attributable to natural and technological disaster-related mortality in the WHO African Region. Methods The impact of disaster-related mortality on GDP was estimated using double-log econometric model and cross-sectional data on various Member States in the WHO African Region. The analysis was based on 45 of the 46 countries in the Region. The data was obtained from various UNDP and World Bank publications. Results The coefficients for capital (K, educational enrolment (EN, life expectancy (LE and exports (X had a positive sign; while imports (M and disaster mortality (DS were found to impact negatively on GDP. The above-mentioned explanatory variables were found to have a statistically significant effect on GDP at 5% level in a t-distribution test. Disaster mortality of a single person was found to reduce GDP by US$0.01828. Conclusions We have demonstrated that disaster-related mortality has a significant negative effect on GDP. Thus, as policy-makers strive to increase GDP through capital investment, export promotion and increased educational enrolment, they should always keep in mind that investments made in the strengthening of national capacity to mitigate the effects of national disasters expeditiously and effectively will yield significant economic returns.

  19. 重型载重车前轴分层淬火工艺仿真分析%Simulation analysis of layer by layer quenching process of a heavy truck front axle

    Institute of Scientific and Technical Information of China (English)

    朱振华; 秦训鹏; 高恺; 陈绪梁

    2016-01-01

    针对重型载重车前轴在传统整体式淬火强化后各部位马氏体含量、力学性能不均匀的问题,提出一种分层淬火工艺,并利用数值分析方法对某重型载重车前轴在分层淬火工艺条件下的温度场和微观组织进行仿真计算。计算结果证明分层淬火工艺能使截面尺寸变化大的前轴在淬火冷却过程中有效改善马氏体分布不均匀现象,提高其综合力学性能。%For the nonuniformity of martensite content and mechanical properties in each part of a heavy truck front axle after traditional integral hardening, a layer by layer quenching process was presented. Temperature field and microstructure content in a heavy truck front axle under the quenching process were calculated by numerical simulation analysis. The calculated results show that the layer by layer quenching process can improve the nonuniformity of martensite distribution in the front axle with large varying of cross section and enhance the comprehensive mechanical properties.

  20. Optimum design of double-front-axle steering based on ADAMS Secondary Development%基于 ADAMS 二次开发的双前桥转向机构优化设计

    Institute of Scientific and Technical Information of China (English)

    李德光

    2013-01-01

      With the development of market demand, the user demand for double front axle commercial vehicle is more and more big. This paper introduces the principle of double-front-axle steering theory, and the dynamic simulation analysis software ADAMS two development platform, software system for heavy commercial vehicle design and optimization of double front axle steering system, the optimized design of the steering mechanism.%  随着市场需求的发展,用户对双前桥商用车的需求越来越大。文中介绍了双前轴转向汽丰的转向原理,以及以动力学仿真分析软件 ADAMS 为二次开发平台,建立针对重型双前桥商用车转向系统设计及优化的专用软件系统,对转向机构进行了优化设计。

  1. 正挤横轧式农用车后桥半轴套管的研究开发%Study and Development of the Rear Axle Shaft Sleeves of Farm Transport Vehicle by Forward Extrusion and Cross Rolling

    Institute of Scientific and Technical Information of China (English)

    韩英淳; 王学明; 唐志强

    2001-01-01

    在成功地开发轻型车正挤与横轧式后桥半轴套管的基础上,自主开发了1608型、2310型及2815型农用运输车的正挤与横轧式后桥半轴套管,并实现系列化规模生产,获得了显著的社会经济效益。%On the basis of the development of the rear axle shaft sleeve of the light truck CA1040 by forward extrusion and cross rolling, to adapt to the rapid growth of farm transport vehicle, the rear axle shaft sleeve of farm transport vehicle 1608,2310,2815 have been developed successively and manufactured on a big scale. In accordance with the characteristic in geometrical shape of the rear axle shaft sleeve, we change it into a detached structure based on the equal strength theory. Since the detached sleeve bodies have a small difference in diameter, they can be formed with technology of the forward extrusion and cross rolling.

  2. Study on Rear Axle Gear Residual Life Predication based on RBF Network%基于RBF网络的后桥齿轮残余寿命预测研究

    Institute of Scientific and Technical Information of China (English)

    曾宇露; 祝志芳

    2012-01-01

    为有效预测汽车后桥齿轮的残余寿命,针对后桥的非线性特性,提出了一种递归预处理与RBF网络相结合的齿轮残余寿命预测方法,并验证了该方法的可行性.利用该方法进行了汽车后桥齿轮残余寿命预测,结果表明,该方法对齿轮残余寿命的预测结果与齿轮疲劳试验结果吻合,预测精度高.%For the non-linearity property of rear axle, a new method, which consists of a recursive pretreatment and RBF neural networks, is presented in this paper to accurately predict residual life of rear axle gear. Simulation and experiment results have proved feasibility of this method. This method can be used to predict the residual life of rear axle gear, the results show that predication of gear residual life with this method is very accurate, and consistent with gear fatigue test results.

  3. The Early Devonian eurypterid Grossopterus overathi (Gross, 1933 from Overath, Germany

    Directory of Open Access Journals (Sweden)

    J. A. Dunlop

    2002-01-01

    Full Text Available The holotype and only known specimen of the eurypterid (Chelicerata: Eurypterida Grossopterus overathi (Gross, 1933 from the Early Devonian (Siegennian of Overath, north-west Germany is redescribed. Based on comparisons with other eurypterid taxa we interpret G. overathi as having a well-preserved type B genital appendage, which exhibits two apomorphic character states: (1 a furca fused into a single, spatulate plate and (2 marginal serrations near the distal end of the appendage. Grossopterus is assigned to the family Hughmilleriidae, but its carapace resembles that of the larger Slimonia acuminata (Salter, 1856 (Slimoniidae. A provisional phylogenetic analysis resolves Grossopterus as the sister group of (Slimonia + Pterygotoidea. The large pterygotids, in particular, have been suggested as significant predators on early vertebrates and hypotheses about eurypterid-fish co-evolution are reviewed, in particular Romer's proposal that dermal armour in fish evolved in response to eurypterid predation. Der Holotyp – das einzig bekannte Exemplar – des Eurypteriden (Chelicerata: Eurypterida Grossopterus overathi (Gross, 1933 aus dem frühen Devon (Siegennian von Overath im nordwestlichen Deutschland wird wieder beschrieben. Basierend auf Vergleichen mit anderen Eurypteriden-Taxa interpretieren wir G. overathi als Träger eines Typ B-Anhanges, wobei zwei apomorphe Merkmalszustände vorliegen: (1 die Furca ist zu einer einzigen, spatelförmigen Platte verschmolzen, und (2 der Seitenrand nahe des distalen Endes des Genitalanhanges ist gezähnt. Grossopterus wird zur Familie der Hughmilleriidae gestellt, aber der prosomale Dorsalschild ähnelt der größeren Slimonia acuminata (Salter, 1856 (Slimoniidae. Eine vorläufige phylogenetische Analyse zeigt Grossopterus als Schwesteruppe von (Slimonia + Pterygotoidea auf. Besonders die großen Pterygotiden wurden als signifikante Prädatoren von frühen Vertebraten gehandelt, und Hypothesen zur Eurypteriden

  4. A STUDY ON GROSS FEATURES AND DIFFERENT POSITIONS OF ADULTS VERMIFORM APPENDIX

    Directory of Open Access Journals (Sweden)

    Kasukurthy Ashalatha

    2016-07-01

    Full Text Available BACKGROUND Appendix is derived from a Latin word (Pendere meaning at the end. It is a narrow worm-like tubular diverticulum, which arises from the posteromedial wall of caecum about 2 cms below the ileocaecal junction and is suspended by a peritoneal fold known as mesoappendix. The body of appendix is kinked on itself where the free border of mesoappendix ends. Hence, it is coiled like a worm and so is named the ‘Vermiform Appendix’. The appendix is taken up for study in view of its different positions, varying anatomical relations, and the clinical complications when pathologically affected. The relations, measurements, positions, and arterial supply were studied by gross dissection in 61 specimens (Adults – 33 and foetuses – 28 from the population of Krishna and Warangal districts of Andhra Pradesh. MATERIALS AND METHODS The present study was done on 31 adult specimens, out the length of the appendix, the diameter of the appendix at base, length of the caecum, length of ascending colon were measured. The position of the appendix was classified as per Datta’s classification. Mesenteric attachment to the vermiform appendix were noted. Even arterial supply of the appendix was studied. RESULTS Length of the appendix in adults varied from 2.00 to 25.00 cm as described by different authors, the average being 3.00 to 12.50 cm. The length of the caecum in adults were ranging from 5 to 8 cm. In the present study, the length of appendix was 14.4 cm The origin of the appendicular artery was from inferior division of ileocolic artery. A single appendicular artery is observed in all the specimens almost coinciding with studies of Michels et al. In the present study, in adults, the mesoappendix was extending to the tip in 19 specimens and extending to a variable extent in 14 specimens. Regarding the positions, in adults, they were retrocaecal, retrocolic, and subcaecal positions were 21.21% and splenic, promontory, and pelvic positions were 78

  5. 45#车轴钢疲劳性能试验研究%Experimental Study on the Fatigue Properties of 45# Axle Steel

    Institute of Scientific and Technical Information of China (English)

    黄国; 黄海明; 王超; 李玮洁

    2013-01-01

    In the non-metallic inclusion inspection and tensile test at room temperature,the metallurgy quality and mechanical properties of materials were checked whether they were up to standards.And then the fatigue properties of 45# axle steel were studied by rotary bending fatigue testing method and fracture analysis.The results show that,compared with smooth specimen,the fatigue limit of notched specimens with the notch depth of 0.75 mm is decreased 44%,and the left slope of its S—N curve is greater than that of the smooth.The sensitive coefficient of notched specimen is 0.79.Moreover,the initiation of fatigue cracks in the smooth specimen is due to the stress concentration on the surface of specimen.There are multi-source areas of fatigue on the cross sections of the notched specimens and the cracks initiate at the lip of the notch,which is mainly caused by the stress concentration at the notch.In addition,larger size non-metallic inclusions may also lead to the initiation of fatigue cracks in axle steel.%通过非金属夹杂物检验和室温拉伸试验,在确保材料的冶金质量和力学性能符合标准要求的基础上,进行旋转弯曲疲劳试验和断口分析,对45#车轴钢的疲劳性能进行研究.结果表明:与光滑试件相比,带有深度为0.75 mm缺口的试件,其疲劳极限应力降低44%,其S—N曲线左段部分的斜率更大;其缺口敏感系数为0.79;表面应力集中是导致光滑试件萌生疲劳裂纹的原因;在有缺口的试件断口截面上存在多个疲劳源区,裂纹萌生在缺口的前缘,而且主要是由于缺口处应力集中所致;较大尺寸的非金属夹杂物也是导致车轴钢可能产生疲劳裂纹的启裂源.

  6. 5 CFR 890.1112 - Denial of continuation of coverage due to involuntary separation for gross misconduct.

    Science.gov (United States)

    2010-01-01

    ... involuntary separation for gross misconduct. 890.1112 Section 890.1112 Administrative Personnel OFFICE OF... involuntary separation for gross misconduct. (a) Notice of denial. (1) When an employing office determines that the offense for which an employee is being removed constitutes gross misconduct for the purpose...

  7. Effects of land use change on soil gross nitrogen transformation rates in subtropical acid soils of Southwest China.

    Science.gov (United States)

    Xu, Yongbo; Xu, Zhihong

    2015-07-01

    Land use change affects soil gross nitrogen (N) transformations, but such information is particularly lacking under subtropical conditions. A study was carried out to investigate the potential gross N transformation rates in forest and agricultural (converted from the forest) soils in subtropical China. The simultaneously occurring gross N transformations in soil were quantified by a (15)N tracing study under aerobic conditions. The results showed that change of land use types substantially altered most gross N transformation rates. The gross ammonification and nitrification rates were significantly higher in the agricultural soils than in the forest soils, while the reverse was true for the gross N immobilization rates. The higher total carbon (C) concentrations and C / N ratio in the forest soils relative to the agricultural soils were related to the greater gross N immobilization rates in the forest soils. The lower gross ammonification combined with negligible gross nitrification rates, but much higher gross N immobilization rates in the forest soils than in the agricultural soils suggest that this may be a mechanism to effectively conserve available mineral N in the forest soils through increasing microbial biomass N, the relatively labile organic N. The greater gross nitrification rates and lower gross N immobilization rates in the agricultural soils suggest that conversion of forests to agricultural soils may exert more negative effects on the environment by N loss through NO3 (-) leaching or denitrification (when conditions for denitrification exist).

  8. Longitudinal Association Between Gross Motor Capacity and Neuromusculoskeletal Function in Children and Youth With Cerebral Palsy

    NARCIS (Netherlands)

    Vos, Rimke C.; Becher, Jules G.; Voorman, Jeanine M.; Gorter, Jan Willem; van Eck, Mirjam; van Meeteren, Jetty; Smits, Dirk Wouter; Twisk, Jos W.; Dallmeijer, Annet J.

    2016-01-01

    Objective: To examine associations over longitudinal measurements between neuromusculoskeletal function and gross motor capacity in children and youth with cerebral palsy (CP). Design: A prospective cohort study. Setting: Rehabilitation departments of university medical centers and rehabilitations c

  9. Longitudinal Association Between Gross Motor Capacity and Neuromusculoskeletal Function in Children and Youth With Cerebral Palsy

    NARCIS (Netherlands)

    Vos, Rimke C.; Becher, Jules G.; Voorman, Jeanine M.; Gorter, Jan Willem; van Eck, Mirjam; van Meeteren, Jetty; Smits, Dirk Wouter; Twisk, Jos W.; Dallmeijer, Annet J.; van Schie, P. E M; Schuengel, C.; Ketelaar, M.; Lindeman, E.; Jongmans, M.; Roebroeck, M. E.; Tan, S. S.; Wiegerink, D. J H G; Reinders-Messelink, H. A.; Verheijden, J.

    2016-01-01

    Objective To examine associations over longitudinal measurements between neuromusculoskeletal function and gross motor capacity in children and youth with cerebral palsy (CP). Design A prospective cohort study. Setting Rehabilitation departments of university medical centers and rehabilitations cent

  10. The central role of trunk control in the gross motor function of children with cerebral palsy

    DEFF Research Database (Denmark)

    Curtis, Derek John; Butler, Penny; Saavedra, Sandy;

    2015-01-01

    Aim Improvement of gross motor function and mobility are primary goals of physical therapy in children with cerebral palsy (CP). The purpose of this study was to investigate the relationship between segmental control of the trunk and the corresponding gross motor function in children with CP....... Method This retrospective cross-sectional study was based on 92 consecutive referrals of children with CP in Gross Motor Function Classification System (GMFCS) levels I to V, 39 females, 53 males (median age 4y [range 1–14y]), and 77, 12, and 3 with spastic, dyskinetic, and ataxic CP respectively....... The participants were tested using the Gross Motor Function Measure (GMFM), the Pediatric Evaluation of Disability Inventory (PEDI), and the Segmental Assessment of Trunk Control (SATCo). Results Linear regression analysis showed a positive relationship between the segmental level of trunk control and age...

  11. Longitudinal Association Between Gross Motor Capacity and Neuromusculoskeletal Function in Children and Youth With Cerebral Palsy

    NARCIS (Netherlands)

    Vos, Rimke C.; Becher, Jules G.; Voorman, Jeanine M.; Gorter, Jan Willem; van Eck, Mirjam; van Meeteren, Jetty; Smits, Dirk Wouter; Twisk, Jos W.; Dallmeijer, Annet J.

    Objective: To examine associations over longitudinal measurements between neuromusculoskeletal function and gross motor capacity in children and youth with cerebral palsy (CP). Design: A prospective cohort study. Setting: Rehabilitation departments of university medical centers and rehabilitations

  12. Longitudinal Association Between Gross Motor Capacity and Neuromusculoskeletal Function in Children and Youth With Cerebral Palsy

    NARCIS (Netherlands)

    Vos, Rimke C.; Becher, Jules G.; Voorman, Jeanine M.; Gorter, Jan Willem; van Eck, Mirjam; van Meeteren, Jetty; Smits, Dirk Wouter; Twisk, Jos W.; Dallmeijer, Annet J.; van Schie, P. E M; Schuengel, C.; Ketelaar, M.; Lindeman, E.; Jongmans, M.; Roebroeck, M. E.; Tan, S. S.; Wiegerink, D. J H G; Reinders-Messelink, H. A.; Verheijden, J.

    2016-01-01

    Objective To examine associations over longitudinal measurements between neuromusculoskeletal function and gross motor capacity in children and youth with cerebral palsy (CP). Design A prospective cohort study. Setting Rehabilitation departments of university medical centers and rehabilitations

  13. Envelope Periodic Solutions to One-Dimensional Gross-Pitaevskii Equation in Bose-Einstein Condensation

    Institute of Scientific and Technical Information of China (English)

    LIU Shi-Kuo; GAO Bin; FU Zun-Tao; LIU Shi-Da

    2009-01-01

    In this paper, applying the dependent and independent variables transformations as well as the Jacobi elliptic function expansion method, the envelope periodic solutions to one-dimensional Gross-Pitaevskii equation in Bose-Einstein condensates are obtained.

  14. Axl基因在口腔鳞状细胞癌中的表达及意义%Expression and clinical significance of the Axl gene in oral squamous cell carcinoma

    Institute of Scientific and Technical Information of China (English)

    王俊杰; 赵腾达; 刘兴光; 朱王勇; 梁培盛; 陶谦

    2016-01-01

    目的:检测Axl( Anexelekto)在口腔鳞状细胞癌中的表达,探索Axl与口腔鳞状细胞癌发生、发展的关系。方法免疫组织化学法( IHC)检测42例口腔鳞状细胞癌患者的癌组织(口腔癌组)及其相应的癌旁组织(癌旁组) Axl的表达状况。原代培养正常人口腔上皮细胞( HOEC ),并培养1株永生化正常口腔角化上皮细胞系( NOK )及2株人舌鳞状细胞癌细胞系(UM1、UM2)。实时荧光定量聚合酶链反应(qRT-PCR)和蛋白免疫印迹分析(Western blot)检测上述4种细胞中的Axl的mR-NA和蛋白的表达情况。结果 Axl在口腔鳞状细胞癌组织中的阳性表达率(61.9%)高于其相应的癌旁正常组织(26.2%),差异具有统计学意义(P<0.05),qRT-PCR和Western blot结果示在HOEC、NOK、UM2、UM1中Axl基因的mRNA表达和蛋白表达逐步增高,且在UM2、UM1中明显高于HOEC、NOK。结论 Axl在口腔癌组织及口腔癌细胞株中的表达较口腔正常组织和正常口腔上皮细胞者中高表达,提示Axl基因可能与口腔鳞状细胞癌的发生、发展相关。%Objective To investigate the relationship between the expression of Axl gene and oncogenesis of oral squamous cell carci-noma ( OSCC) . Methods The immunohistochemical expressions of Axl genes in tumor tissues from 42 patients with OSCC ( OSCC group) and in correspondingly adjacent tissues ( adjacent group) were examined. In vitro, expression of mRNA and protein of Axl in normal human oral epithelium cell ( HOEC) , immortalized normal oral keratinocyte cell ( NOK) , tongue squamous cell carcinoma cell lines UM1 and UM2 were detected by real-time fluorescent quantitative polymerase chain reaction ( qRT-PCR ) and Western blot (WB), respectively. Results There was significant difference between OSCC group and adjacent group (61. 9% vs. 26. 2%, P<0. 05) in immunohistochemical expression of Axl. Expression of mRNA and proteins of Axl in UM2 and UM1 were significantly higher than those in HOEC

  15. Effect of physical therapy frequency on gross motor function in children with cerebral palsy

    OpenAIRE

    Park, Eun-Young

    2016-01-01

    [Purpose] This study attempted to investigate the effect of physical therapy frequency based on neurodevelopmental therapy on gross motor function in children with cerebral palsy. [Subjects and Methods] The study sample included 161 children with cerebral palsy who attended a convalescent or rehabilitation center for disabled individuals or a special school for children with physical disabilities in South Korea. Gross Motor Function Measure data were collected according to physical therapy fr...

  16. Current usage and future trends in gross digital photography in Canada.

    Science.gov (United States)

    Horn, Christopher L; DeKoning, Lawrence; Klonowski, Paul; Naugler, Christopher

    2014-01-14

    The purpose of this study was to assess the current usage, utilization and future direction of digital photography of gross surgical specimens in pathology laboratories across Canada. An online survey consisting of 23 multiple choice and free-text questions regarding gross digital photography was sent out to via email to laboratory staff across Canada involved in gross dissection of surgical specimens. Sixty surveys were returned with representation from most of the provinces. Results showed that gross digital photography is utilized at most institutions (90.0%) and the primary users of the technology are Pathologists (88.0%), Pathologists' Assistants (54.0%) and Pathology residents (50.0%). Most respondents felt that there is a definite need for routine digital imaging of gross surgical specimens in their practice (80.0%). The top two applications for gross digital photography are for documentation of interesting/ complex cases (98.0%) and for teaching purposes (84.0%). The main limitations identified by the survey group are storage space (42.5%) and security issues (40.0%). Respondents indicated that future applications of gross digital photography mostly include teaching (96.6%), presentation at tumour boards/ clinical rounds (89.8%), medico-legal documentation (72.9%) and usage for consultation purposes (69.5%). The results of this survey indicate that pathology staff across Canada currently utilizes gross digital images for regular documentation and educational reasons. They also show that the technology will be needed for future applications in teaching, consultation and medico-legal purposes.

  17. Class numbers of cyclic 2-extensions and Gross conjecture over Q

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The Gross conjecture over Q was first claimed by Aoki in 1991.However,the original proof contains too many mistakes and false claims to be considered as a serious proof.This paper is an attempt to find a sound proof of the Gross conjecture under the outline of Aoki.We reduce the conjecture to an elementary conjecture concerning the class numbers of cyclic 2-extensions of Q.

  18. Gross changes in reconstructions of historic land cover/use for Europe between 1900 and 2010.

    Science.gov (United States)

    Fuchs, Richard; Herold, Martin; Verburg, Peter H; Clevers, Jan G P W; Eberle, Jonas

    2015-01-01

    Historic land-cover/use change is important for studies on climate change, soil carbon, and biodiversity assessments. Available reconstructions focus on the net area difference between two time steps (net changes) instead of accounting for all area gains and losses (gross changes). This leads to a serious underestimation of land-cover/use dynamics with impacts on the biogeochemical and environmental assessments based on these reconstructions. In this study, we quantified to what extent land-cover/use reconstructions underestimate land-cover/use changes in Europe for the 1900-2010 period by accounting for net changes only. We empirically analyzed available historic land-change data, quantified their uncertainty, corrected for spatial-temporal effects and identified underlying processes causing differences between gross and net changes. Gross changes varied for different land classes (largest for forest and grassland) and led to two to four times the amount of net changes. We applied the empirical results of gross change quantities in a spatially explicit reconstruction of historic land change to reconstruct gross changes for the EU27 plus Switzerland at 1 km spatial resolution between 1950 and 2010. In addition, the reconstruction was extended back to 1900 to explore the effects of accounting for gross changes on longer time scales. We created a land-change reconstruction that only accounted for net changes for comparison. Our two model outputs were compared with five commonly used global reconstructions for the same period and area. In our reconstruction, gross changes led in total to a 56% area change (ca. 0.5% yr(-1)) between 1900 and 2010 and cover twice the area of net changes. All global reconstructions used for comparison estimated fewer changes than our gross change reconstruction. Main land-change processes were cropland/grassland dynamics and afforestation, and also deforestation and urbanization. © 2014 John Wiley & Sons Ltd.

  19. Research on Heating Problem of Rotary Kiln Axle Tile Care%回转窑托轮轴瓦发热问题的研究

    Institute of Scientific and Technical Information of China (English)

    和春梅; 杨晓杰; 罗玉银

    2011-01-01

    The rotary kiln, as the "heart" equipment of cement production, often appears the phenomenon of tile prop shaft heat in the using process,which lead to the low efficiency of rotary kiln.This article analyzes the main causes of heating problem of the rotary kiln tile axle from the two aspects of the lubrication and load distribution condition, and proposes the appropriate preventive measures.%回转窑作为水泥生产时的"心脏"设备,在使用过程中常常出现托轮轴瓦发热的现象,这是导致回转窑工作效率降低的最直接和最普遍的问题.本文主要从润滑状态和载荷分布情况与两个方面,分析了回转窑托轮轴瓦发热的主要原因,并指出了相应的预防措施.

  20. rse, a novel receptor-type tyrosine kinase with homology to Axl/Ufo, is expressed at high levels in the brain.

    Science.gov (United States)

    Mark, M R; Scadden, D T; Wang, Z; Gu, Q; Goddard, A; Godowski, P J

    1994-04-08

    We have isolated cDNA clones that encode the human and murine forms of a novel receptor-type tyrosine kinase termed Rse. Sequence analysis indicates that human Rse contains 890 amino acids, with an extracellular region composed of two immunoglobulin-like domains followed by two fibronectin type III domains. Murine Rse contains 880 amino acids and shares 90% amino acid identity with its human counterpart. Rse is structurally similar to the receptor-type tyrosine kinase Axl/Ufo, and the two proteins have 35 and 63% sequence identity in their extracellular and intracellular domains, respectively. To study the synthesis and activation of this putative receptor-type tyrosine kinase, we constructed a version of Rse (termed gD-Rse, where gD represents glycoprotein D) that contains an NH2-terminal epitope tag. NIH3T3 cells were engineered to express gD-Rse, which could be detected at the cell surface by fluorescence-activated cell sorting. Moreover, gD-Rse was rapidly phosphorylated on tyrosine residues upon incubation of the cells with an antibody directed against the epitope tag, suggesting that rse encodes an active tyrosine kinase. In the human tissues we examined, the highest level of expression of rse mRNA was observed in the brain; rse mRNA was also detected in the premegakaryocytopoietic cell lines CMK11-5 and Dami. The gene for rse was localized to human chromosome 15.

  1. Characterization of Gas6, a member of the superfamily of G domain-containing proteins, as a ligand for Rse and Axl.

    Science.gov (United States)

    Mark, M R; Chen, J; Hammonds, R G; Sadick, M; Godowsk, P J

    1996-04-19

    Rse, Ax1, and c-Mer comprise a family of cell adhesion molecule-related tyrosine kinase receptors. Human Gas6 was recently shown to act as a ligand for both human Rse (Godowski et al., 1995) and human Ax1 (Varnum et al., 1995). Gas6 contains an NH2-terminal Gla domain followed by four epidermal growth factor-like repeats and tandem globular (G) domains. The G domains are related to those found in sex hormone-binding globulin and to those utilized by laminin and agrin for binding to the dystroglycan complex. A series of Gas6 variants were tested for their ability to bind to Rse and Ax1. The Gla domain and epidermal growth factor-like repeats were not required for receptor binding, as deletion variants of Gas6 which lacked these domains bound to the extracellular domains of both Rse and Axl. A deletion variant of Gas6 containing just the G domain region was shown to activate Rse phosphorylation. These results provide evidence that G domains can act as signaling molecules by activating transmembrane receptor tyrosine kinases. Furthermore, they provide a structural link between the activation of cell adhesion related receptors and the control of cell growth and differentiation by the G domain-containing superfamily of proteins.

  2. The relationship between spasticity and gross motor capability in nonambulatory children with spastic cerebral palsy.

    Science.gov (United States)

    Katusic, Ana; Alimovic, Sonja

    2013-09-01

    Spasticity has been considered as a major impairment in cerebral palsy (CP), but the relationship between this impairment and motor functions is still unclear, especially in the same group of patients with CP. The aim of this investigation is to determine the relationship between spasticity and gross motor capability in nonambulatory children with spastic CP. Seventy-one children (30 boys, 41 girls) with bilateral spastic cerebral palsy and with Gross Motor Function Classification System (GMFCS) levels IV (n=34) and V (n=37) were included in the study. The spasticity level in lower limbs was evaluated using the Modified Modified Ashworth Scale and the gross motor function with the Gross Motor Function Measure (GMFM-88). Spearman's correlation analysis was used to determine the nature and the strength of the relationship. The results showed a moderate correlation between spasticity and gross motor skills (ρ=0.52 for the GMFCS level; ρ=0.57 for the GMFM-88), accounting for less than 30% of the explained variance. It seems that spasticity is just one factor among many others that could interfere with gross motor skills, even in children with severe forms of spastic CP. Knowledge of the impact of spasticity on motor skills may be useful in the setting of adequate rehabilitation strategies for nonambulatory children with spastic CP.

  3. Determination of respiration, gross nitrification and denitrification in soil profile using BaPS system

    Institute of Scientific and Technical Information of China (English)

    CHEN Shu-tao; HUANG Yao

    2006-01-01

    A facility of BaPS (Barometric Process Separation) was used to determine soil respiration, gross nitrification and denitrification in a winter wheat field with depths of 0-7, 7-14 and 14-21 cm. N2O production was determined by a gas chromatograph. Crop root mass and relevant soil parameters were measured. Results showed that soil respiration and gross nitrification decreased with the increase of soil depth, while denitrification did not change significantly. In comparison with no-plowing plot, soil respiration increased significantly in plowing plot, especially in the surface soil of 0-7 cm, while gross nitrification and denitrification rates were not affected by plowing. Cropping practice in previous season was found to affect soil gross nitrification in the following wheat-growing season. Higher gross nitrification rate occurred in the filed plot with preceding crop of rice compared with that of maize for all the three depths of 0-7, 7-14 and 14-21 cm. A further investigation indicated that the nitrification for all the cases accounted for about 76% of the total nitrogen transformation processes of nitrification and denitrification and the N2O production correlated with nitrification significantly, suggesting that nitrification is a key process of soil N2O production in the wheat field. In addition, the variations of soil respiration and gross nitrification were exponentially dependent on root mass (P<0.001).

  4. Gross-beta activity in ground water: natural sources and artifacts of sampling and laboratory analysis

    Science.gov (United States)

    Welch, Alan H.

    1995-01-01

    Gross-beta activity has been used as an indicator of beta-emitting isotopes in water since at least the early 1950s. Originally designed for detection of radioactive releases from nuclear facilities and weapons tests, analysis of gross-beta activity is widely used in studies of naturally occurring radioactivity in ground water. Analyses of about 800 samples from 5 ground-water regions of the United States provide a basis for evaluating the utility of this measurement. The data suggest that measured gross-beta activities are due to (1) long-lived radionuclides in ground water, and (2) ingrowth of beta-emitting radionuclides during holding times between collection of samples and laboratory measurements.Although40K and228Ra appear to be the primary sources of beta activity in ground water, the sum of40K plus228Ra appears to be less than the measured gross-beta activity in most ground-water samples. The difference between the contribution from these radionuclides and gross-beta activity is most pronounced in ground water with gross-beta activities > 10 pCi/L, where these 2 radionuclides account for less than one-half the measured ross-beta activity. One exception is groundwater from the Coastal Plain of New Jersey, where40K plus228Ra generally contribute most of the gross-beta activity. In contrast,40K and228Ra generally contribute most of beta activity in ground water with gross-beta activities measure all beta activity in ground water. Although3H contributes beta activity to some ground water, it is driven from the sample before counting and therefore is not detected by gross-beta measurements. Beta-emitting radionuclides with half-lives shorter than a few days can decay to low values between sampling and counting. Although little is known about concentrations of most short-lived beta-emitting radionuclides in environmental ground water (water unaffected by direct releases from nuclear facilities and weapons tests), their activities are expected to be low.Ingrowth of

  5. Artifacts in conventional computed tomography (CT) and free breathing four-dimensional CT induce uncertainty in gross tumor volume determination

    DEFF Research Database (Denmark)

    Persson, Gitte Fredberg; Nygaard, Ditte Eklund; Af Rosenschöld, Per Munck;

    2011-01-01

    PURPOSE: Artifacts impacting the imaged tumor volume can be seen in conventional three-dimensional CT (3DCT) scans for planning of lung cancer radiotherapy but can be reduced with the use of respiration-correlated imaging, i.e., 4DCT or breathhold CT (BHCT) scans. The aim of this study...... was to compare delineated gross tumor volume (GTV) sizes in 3DCT, 4DCT, and BHCT scans of patients with lung tumors. METHODS AND MATERIALS: A total of 36 patients with 46 tumors referred for stereotactic radiotherapy of lung tumors were included. All patients underwent positron emission tomography (PET)/CT, 4DCT......, and BHCT scans. GTVs in all CT scans of individual patients were delineated during one session by a single physician to minimize systematic delineation uncertainty. The GTV size from the BHCT was considered the closest to true tumor volume and was chosen as the reference. The reference GTV size...

  6. Dissecting the multicellular ecosystem of metastatic melanoma by single-cell RNA-seq

    Science.gov (United States)

    Tirosh, Itay; Izar, Benjamin; Prakadan, Sanjay M.; Wadsworth, Marc H.; Treacy, Daniel; Trombetta, John J.; Rotem, Asaf; Rodman, Christopher; Lian, Christine; Murphy, George; Fallahi-Sichani, Mohammad; Dutton-Regester, Ken; Lin, Jia-Ren; Cohen, Ofir; Shah, Parin; Lu, Diana; Genshaft, Alex S.; Hughes, Travis K.; Ziegler, Carly G. K.; Kazer, Samuel W.; Gaillard, Aleth; Kolb, Kellie E.; Villani, Alexandra-Chloé; Johannessen, Cory M.; Andreev, Aleksandr Y.; Van Allen, Eliezer M.; Bertagnolli, Monica; Sorger, Peter K.; Sullivan, Ryan J.; Flaherty, Keith T.; Frederick, Dennie T.; Jané-Valbuena, Judit; Yoon, Charles H.; Rozenblatt-Rosen, Orit; Shalek, Alex K.; Regev, Aviv; Garraway, Levi A.

    2016-01-01

    To explore the distinct genotypic and phenotypic states of melanoma tumors we applied single-cell RNA-seq to 4,645 single cells isolated from 19 patients, profiling malignant, immune, stromal and endothelial cells. Malignant cells within the same tumor displayed transcriptional heterogeneity associated with the cell cycle, spatial context, and a drug resistance program. In particular, all tumors harbored malignant cells from two distinct transcriptional cell states, such that “MITF-high” tumors also contained “AXL-high” tumor cells. Single-cell analyses suggested distinct tumor micro-environmental patterns, including cell-to-cell interactions. Analysis of tumor-infiltrating T cells revealed exhaustion programs, their connection to T cell activation and to clonal expansion, and their variability across patients. Overall, we begin to unravel the cellular ecosystem of tumors and how single cell genomics offers insights with implications for both targeted and immune therapies. PMID:27124452

  7. A geostatistical synthesis study of factors affecting gross primary productivity in various ecosystems of North America

    Directory of Open Access Journals (Sweden)

    V. Yadav

    2010-02-01

    Full Text Available A coupled Bayesian model selection and geostatistical regression modeling approach is adopted for empirical analysis of gross primary productivity (GPP at six AmeriFlux sites, including the Kennedy Space Center Scrub Oak, Vaira Ranch, Tonzi Ranch, Blodgett Forest, Morgan Monroe State Forest, and Harvard Forest sites. The analysis is performed at a continuum of temporal scales ranging from daily to monthly, for a period of seven years. A total of 10 covariates representing environmental stimuli and indices of plant physiology are considered in explaining variations in GPP. Similar to other statistical methods, the proposed approach estimates regression coefficients and uncertainties associated with the covariates in a selected regression model. However, unlike traditional regression methods, the presented approach also estimates the uncertainty associated with the selection of a single "best" model of GPP. In addition, the approach provides an enhanced understanding of how the importance of specific covariates changes with temporal resolutions. An examination of trends in the importance of specific covariates reveals scaling thresholds above or below which covariates become significant in explaining GPP. Results indicate that most sites (especially those with a stronger seasonal cycle exhibit at least one prominent scaling threshold between daily to 20-day temporal scale. This demonstrates that environmental variables that explain GPP at synoptic scales are different from those that capture its seasonality. At shorter time scales, radiation, temperature, and vapor pressure deficit exert most significant influence on GPP at most examined sites. However, at coarser time scales, the importance of these covariates in explaining GPP declines. Overall, unique best models are identified at most sites at the daily scale, whereas multiple competing models are identified at larger time scales. In addition, the selected models are able to explain a larger

  8. A geostatistical synthesis study of factors affecting gross primary productivity in various ecosystems of North America

    Directory of Open Access Journals (Sweden)

    V. Yadav

    2010-09-01

    Full Text Available A coupled Bayesian model selection and geostatistical regression modeling approach is adopted for empirical analysis of gross primary productivity (GPP at six AmeriFlux sites, including the Kennedy Space Center Scrub Oak, Vaira Ranch, Tonzi Ranch, Blodgett Forest, Morgan Monroe State Forest, and Harvard Forest sites. The analysis is performed at a continuum of temporal scales ranging from daily to monthly, for a period of seven years. A total of 10 covariates representing environmental stimuli and indices of plant physiology are considered in explaining variations in GPP. Similarly to other statistical methods, the presented approach estimates regression coefficients and uncertainties associated with the covariates in a selected regression model. Unlike traditional regression methods, however, the approach also estimates the uncertainty associated with the selection of a single "best" model of GPP. In addition, the approach provides an enhanced understanding of how the importance of specific covariates changes with the examined timescale (i.e. temporal resolution. An examination of changes in the importance of specific covariates across timescales reveals thresholds above or below which covariates become important in explaining GPP. Results indicate that most sites (especially those with a stronger seasonal cycle exhibit at least one prominent scaling threshold between the daily and 20-day temporal scales. This demonstrates that environmental variables that explain GPP at synoptic scales are different from those that capture its seasonality. At shorter time scales, radiation, temperature, and vapor pressure deficit exert the most significant influence on GPP at most examined sites. At coarser time scales, however, the importance of these covariates in explaining GPP declines. Overall, unique best models are identified at most sites at the daily scale, whereas multiple competing models are identified at longer time scales.

  9. Structural Uncertainty in Model-Simulated Trends of Global Gross Primary Production

    Directory of Open Access Journals (Sweden)

    Zaichun Zhu

    2013-03-01

    Full Text Available Projected changes in the frequency and severity of droughts as a result of increase in greenhouse gases have a significant impact on the role of vegetation in regulating the global carbon cycle. Drought effect on vegetation Gross Primary Production (GPP is usually modeled as a function of Vapor Pressure Deficit (VPD and/or soil moisture. Climate projections suggest a strong likelihood of increasing trend in VPD, while regional changes in precipitation are less certain. This difference in projections between VPD and precipitation can cause considerable discrepancies in the predictions of vegetation behavior depending on how ecosystem models represent the drought effect. In this study, we scrutinized the model responses to drought using the 30-year record of Global Inventory Modeling and Mapping Studies (GIMMS 3g Normalized Difference Vegetation Index (NDVI dataset. A diagnostic ecosystem model, Terrestrial Observation and Prediction System (TOPS, was used to estimate global GPP from 1982 to 2009 under nine different experimental simulations. The control run of global GPP increased until 2000, but stayed constant after 2000. Among the simulations with single climate constraint (temperature, VPD, rainfall and solar radiation, only the VPD-driven simulation showed a decrease in 2000s, while the other scenarios simulated an increase in GPP. The diverging responses in 2000s can be attributed to the difference in the representation of the impact of water stress on vegetation in models, i.e., using VPD and/or precipitation. Spatial map of trend in simulated GPP using GIMMS 3g data is consistent with the GPP driven by soil moisture than the GPP driven by VPD, confirming the need for a soil moisture constraint in modeling global GPP.

  10. Optimal utilization of modern reproductive technologies to maximize the gross margin of milk production.

    Science.gov (United States)

    Heikkilä, A-M; Peippo, J

    2012-06-01

    In this study, a linear programming model was developed to maximize the gross margin of milk production by determining the optimal use of different reproductive technologies in a dairy herd. The model has the potential to vary the use of conventional artificial insemination, insemination with X-sorted sperm, and the use of unselected or sex-selected embryo recovery and transfer. Data from Finnish dairy herd recording systems were used to parameterize the model. This paper presents the results of 6 scenarios for a herd size of 60 dairy cows. In the basic scenario, the optimum economic combination for Finnish conditions was to inseminate 10 heifers and 22 cows with unsorted semen, 8 heifers with X-sorted sperm, and to use 20 cows as embryo donors which was the upper constraint for this technique. The embryo donors were inseminated with conventional semen for both embryo production and their subsequent pregnancy. Without restriction on embryo recovery, the optimum combination was to use all heifers as donors of sex-selected embryos and all cows as donors of unselected embryos. It was more profitable to produce female embryos with X-sorted sperm than by sorting embryos. Embryo recipients were not economically justified in any scenario. In practice, the optimal strategy is herd-specific depending on the input costs, output values and the technical success of each reproductive technology in that herd. This single-year linear programming model adequately differentiates between breeding technologies within a herd, but further research is needed to develop dynamic models to consider genetic improvement and herd expansion. Copyright © 2012 Elsevier B.V. All rights reserved.

  11. Improving North American gross primary production (GPP) estimates using atmospheric measurements of carbonyl sulfide (COS)

    Science.gov (United States)

    Chen, Huilin; Montzka, Steve; Andrews, Arlyn; Sweeney, Colm; Jacobson, Andy; Miller, Ben; Masarie, Ken; Jung, Martin; Gerbig, Christoph; Campbell, Elliott; Abu-Naser, Mohammad; Berry, Joe; Baker, Ian; Tans, Pieter

    2013-04-01

    Understanding the responses of gross primary production (GPP) to climate change is essential for improving our prediction of climate change. To this end, it is important to accurately partition net ecosystem exchange of carbon into GPP and respiration. Recent studies suggest that carbonyl sulfide is a useful tracer to provide a constraint on GPP, based on the fact that both COS and CO2 are simultaneously taken up by plants and the quantitative correlation between GPP and COS plant uptake. We will present an assessment of North American GPP estimates from the Simple Biosphere (SiB) model, the Carnegie-Ames-Stanford Approach (CASA) model, and the MPI-BGC model through atmospheric transport simulations of COS in a receptor oriented framework. The newly upgraded Hybrid Single Particle Lagrangian Integrated Trajectory Model (HYSPLIT) will be employed to compute the influence functions, i.e. footprints, to link the surface fluxes to the concentration changes at the receptor observations. The HYSPLIT is driven by the 3-hourly archived NAM 12km meteorological data from NOAA NCEP. The background concentrations are calculated using empirical curtains along the west coast of North America that have been created by interpolating in time and space the observations at the NOAA/ESRL marine boundary layer stations and from aircraft vertical profiles. The plant uptake of COS is derived from GPP estimates of biospheric models. The soil uptake and anthropogenic emissions are from Kettle et al. 2002. In addition, we have developed a new soil flux map of COS based on observations of molecular hydrogen (H2), which shares a common soil uptake term but lacks a vegetative sink. We will also improve the GPP estimates by assimilating atmospheric observations of COS in the receptor oriented framework, and then present the assessment of the improved GPP estimates against variations of climate variables such as temperature and precipitation.

  12. Evaluation of free i-applications for tertiary level gross anatomy education

    Directory of Open Access Journals (Sweden)

    Matthew F. Pollard

    2012-04-01

    Full Text Available BackgroundThe use of electronic resources in education, including i-applications used on portable handheld devices, is increasing. Apple® handheld devices are popular, with free applications the most prevalent download form. Many gross anatomy i-applications are available, however no information on the quality of free anatomy products is available. Rating such products could therefore guide product recommendations.AimTo evaluate the quality and range of free iPod® applications that are applicable for tertiary level gross anatomy education.MethodsA search of the iTunes® Application Store with keywords anatomy, free, medical, functional, clinical, gross, and human was performed, with inclusion based on free applications containing human gross anatomy usable for tertiary education purposes. Application specification was noted; each was trialled independently and rated for usability, specification, academic level, and quality (image and programme.ResultsSixty-three applications were identified and eleven met inclusion criteria. Two provided gross anatomy of the entire body, nine examined specific regions or systems. Five were judged introductory in academic level, five intermediate, and one advanced. One application was rated low quality, and four excellent. None were considered difficult to use (six easy, five medium. Application size ranged between 1.2MB and 229MB (mean 27MB.ConclusionsThere are few free i-applications for learning gross anatomy and most concentrate on individual body systems, with the academic level and usability of all products well rated. Results suggest some free I-applications could be suitable adjuncts for gross anatomy education at both an undergraduate and graduate level.

  13. Single rotating molecule-machines: nanovehicles and molecular motors.

    Science.gov (United States)

    Rapenne, Gwénaël; Joachim, Christian

    2014-01-01

    In the last decade many molecular machines with controlled molecular motions have been synthesized. In the present review chapter we will present and discuss our contribution to the field, in particular through some examples of rotating molecular machines that have been designed, synthesized, and studied in our group. After starting by explaining why it is so important to study such machines as single molecules, we will focus on two families of molecular machines, nanovehicles and molecular motors. The first members of the nanovehicle family are molecules with two triptycenes as wheels: the axle and the wheelbarrow. Then come the four-wheel nanocars. Since triptycene wheels are not very mobile on metallic surfaces, alternative wheels with a bowl-shape structure have also been synthesized and studied on surfaces. The molecular motors are built around ruthenium organometallic centers and have a piano-stool geometry with peripheric ferrocenyl groups.

  14. Single-magnet rotary flowmeter for liquid metals

    CERN Document Server

    Priede, Jānis; Gerbeth, Gunter

    2010-01-01

    We present the theory of single-magnet flowmeter for liquid metals and compare it with experimental results. The flowmeter consists of a freely rotating permanent magnet, which is magnetized perpendicularly to the axle it is mounted on. When such a magnet is placed close to a tube carrying liquid metal flow, it rotates so that the driving torque due to the eddy currents induced by the flow is balanced by the braking torque induced by the rotation itself. The equilibrium rotation rate depends directly on the flow rate but not on the electrical conductivity of the metal or the magnet strength. We obtain simple analytical solutions for the force and torque on slowly moving and rotating magnets due to eddy currents in a layer of infinite horizontal extent. The predicted equilibrium rotation rate for a dipole agrees well with the magnet rotation rate measured at a stainless steel duct with a liquid sodium flow.

  15. Measurements of gross energy consumption in new buildings meeting Danish building Regulations 2005. Project summary; Maeling af bruttoenergiforbrug i nybyggeri svarende til BR2005 energikrav. Projektresume

    Energy Technology Data Exchange (ETDEWEB)

    Tommerup, H.

    2004-07-01

    During the heating season of 2003/2004, gross energy measurements have been made on a number of single-family houses that represent ordinary building systems in Denmark and meet future stricter energy requirements in new energy regulations of the building regulations. All the houses have floor heating and mechanical ventilation with heat recovery. When new energy regulations are introduced in the building regulations, the primary energy requirements on buildings will be based on the gross energy consumption, corresponding to the total energy consumption except electricity consumption for appliances. In relation to this, the object of the project has been to document and analyse the test result that have come to light and to compare with future requirements on the gross energy consumption. The electricity consumption of appliances is interesting too, however, as this has an effect on the heat demand. The object of the project has therefore also been to gather operation experience for the electricity consuming equipment in general with a view to throwing light on its influence on the heat demand, including to investigate how large a part of the electricity consumption proves of use in the heating of the house, and more overriding how the electricity consumption influences the heat consumption. (au)

  16. Gross alpha determination in radioactive wastes from nuclear power plants using the track registration technique

    Energy Technology Data Exchange (ETDEWEB)

    Suarez-Navarro, M.J. [Universidad Politecnica de Madrid (UPM) E.T.S.I de Caminos, Canales y Puertos, Profesor Aranguren, s/n, 28040 Madrid (Spain)]. E-mail: he04@caminos.upm.es; Pujol, Ll. [Centro de Estudios y Experimentacion de Obras Publicas (CEDEX), Alfonso XII, 3, 28014 Madrid (Spain); Gonzalez-Gonzalez, J.A. [Universidad Politecnica de Madrid (UPM) E.T.S.I de Caminos, Canales y Puertos, Profesor Aranguren, s/n, 28040 Madrid (Spain)

    2007-03-15

    Low and intermediate level nuclear wastes (ion-exchange resins and evaporator concentrates) essentially contain beta and gamma emitters, with very few alpha emitters. Several techniques may be used to determine gross alpha activity but, in this case, solid-state nuclear track detectors (SSNTDs) are a suitable technique for gross alpha determination because track detectors are not sensitive to beta and gamma emitters. Also, this technique is simple and inexpensive. In this paper, we studied the parameters (background, efficiency and self-absorption) that could affect the gross alpha determination using SSNTDs for both sample preparation methods, the 'dry method' with tensioactives and the 'wet method'. For the 'dry method', a self-absorption curve for {sup 241}Am standard was prepared using a set of varying thickness of sodium salt and for two different tensioactives: Tween{sup (R)}20 and Teg. The results showed that, below 1mg/cm{sup 2}, the self-absorption factor can be considered similar for both tensioactives and equal to unity. Several detectors for gross alpha determination were compared and we found that the most suitable techniques were ZnS(Ag) solid scintillator and track detectors. Both detectors were used to compare radioactive waste samples. Finally, the proposed methods ('dry method' with Teg tensioactive and 'wet method') using track detectors were tested by analysing the gross alpha activity of several radioactive wastes.

  17. Assessment of the effects of greywater reuse on gross solids movement in sewer systems.

    Science.gov (United States)

    Penn, R; Schütze, M; Friedler, E

    2014-01-01

    Onsite greywater reuse (GWR) and installation of water-efficient toilets (WETs) reduce urban freshwater demand and thus enhance urban water use sustainability. Research on GWR and WETs has generally overlooked their potential effects on municipal sewer systems: GWR and WETs affect the flow regime in sewers, and consequently also influence gross solids transport. To asses these impacts, a gross solids transport model was developed. The model is based on approaches found in the literature. Hydrodynamic calculations of sewage flow were performed using the SIMBA6 simulator and then used for the gross solid movement models. Flow characteristics in the up- and downstream sections of the sewer network differ. Therefore different approaches were used to model solids movement in each of these two parts. Each model determines whether a solid moves as a result of a momentary sewage flow, and if it moves, calculation of its velocity is possible. The paper shows the adoption and implementation of two gross solids transport models using SIMBA6 and depicts the results of the effects of various GWR and WET scenarios on gross solids movement in sewers for a real case study in Israel.

  18. Evaluation of the contributions of four components of gross domestic product in various regions in China.

    Directory of Open Access Journals (Sweden)

    Sanmang Wu

    Full Text Available Four major components influence the growth of the gross domestic product in Chinese provinces: consumption, investment, transnational exports, and inter-provincial exports. By splitting a competitive input-output table into a non-competitive input-output table, this study used an input-output model to measure the contributions of the four components of gross domestic product in various regions in China. We found that international exports drove the growth of the gross domestic product more strongly in the eastern region than in other regions. Investment and inter-provincial exports were the major impetus for gross domestic product growth in the central and western regions. We also found that consumption played a minimal role in driving the growth of the gross domestic product in all regions in China. According to these findings, although various regions can share much in terms of policies to transform the impetus for economic growth, there should be different foci for different regions. Their shared policy is to increase the role of final consumption in stimulating economic growth. Region-specific policies mandate that the eastern region should strengthen the driving force provided by international exports and that the central and western regions should strengthen indigenous growth capabilities by improving scientific innovation, industrial support, and institutional innovation.

  19. Gross Motor Function Measure Evolution Ratio: Use as a Control for Natural Progression in Cerebral Palsy.

    Science.gov (United States)

    Marois, Pierre; Marois, Mikael; Pouliot-Laforte, Annie; Vanasse, Michel; Lambert, Jean; Ballaz, Laurent

    2016-05-01

    To develop a new way to interpret Gross Motor Function Measure (GMFM-66) score improvement in studies conducted without control groups in children with cerebral palsy (CP). The curves, which describe the pattern of motor development according to the children's Gross Motor Function Classification System level, were used as historical control to define the GMFM-66 expected natural evolution in children with CP. These curves have been modeled and generalized to fit the curve to particular children characteristics. Research center. Not applicable. Not applicable. Not applicable. Assuming that the GMFM-66 score evolution followed the shape of the Rosenbaum curves, by taking into account the age and GMFM-66 score of children, the expected natural evolution of the GMFM-66 score was predicted for any group of children with CP who were Motor Function Measure Evolution Ratio, was defined as follows: Gross Motor Function Measure Evolution Ratio=measured GMFM-66 score change/expected natural evolution. For practical or ethical reasons, it is almost impossible to use control groups in studies evaluating effectiveness of many therapeutic modalities. The Gross Motor Function Measure Evolution Ratio gives the opportunity to take into account the expected natural evolution of the gross motor function of children with CP, which is essential to accurately interpret the therapy effect on the GMFM-66. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  20. Determination of natural radioactivity by gross alpha and beta measurements in ground water samples.

    Science.gov (United States)

    Turhan, S; Ozçitak, E; Taşkin, H; Varinlioğlu, A

    2013-06-01

    In this study, the activity concentrations of the gross α and β in ground water samples collected from the different drilled wells in Nevşehir province were measured to assess annual effective dose due to the ingestion of the water samples. Nevşehir province is one of the major cities of Cappadocia Region which is a popular tourist destination as it has many areas with unique geological, historic, and cultural features. Sampling and measurements were carried out in the autumn of 2011 and the spring of 2012. The values of the activity concentrations of the gross α and β measured in the water samples ranged from 80 to 380 mBq L(-1) with a mean of 192 mBq L(-1) and 120-3470 mBq L(-1) with a mean of 579 mBq L(-1) respectively. All values of the gross α were lower than the limit value of 500 mBq L(-1) while two ground water samples were found to have gross β activity concentrations of greater than 1000 mBq L(-1). Therefore two water samples were the subject of further radioisotope-specific analysis. The obtained result indicated that the elevated activity concentrations of the gross β in these water samples are dominated by (40)K activity. Annual effective doses ranged from 0.04 to 0.20 mSv y(-1).

  1. GENDER DIFFERENCES IN FINE AND GROSS MOTOR SKILLS OF NORMALLY DEVELOPING OVERWEIGHT AND OBESE ADOLESCENTS

    Directory of Open Access Journals (Sweden)

    Şehmus ASLAN

    2016-12-01

    Full Text Available The purpose of this research is to compare girls’ and boys’ fine and gross motor skills in normally developing overweight and obese adolescents. 18 girls and 28 boys with 12-18 age range, in totally 46 overweight and obese adolecents participated in the study. Body mass index of participants were calculated. Fine and gross motor skills of adolescents were assessed by Short Form Bruininks-Oseretsky Test of Motor Proficiency (BOT-2 SF. There was no differences between girls and boys for BOT-2 SF total scores (p>0.05, but it was found differences in several items of BOT-2 SF. Scores of test items for fine motor scores in the girls were higher than the boys (p0.05. Gross motor skill tests including jumping in place, dribling a ball, sit-ups, one- legged stationary hop test scores were higher in the boys, while tapping feet and fingers test score was higher in the girls (p<0.05. Our results suggested that there is differences between girls’ and boys’ fine and gross motor skills in normally developing overweight and obese adolescents. Girls have better fine motor skill performance while boys have better gross motor skill performance in overweight and obese adolescents.

  2. ASSETS ADMITTED TO COVER GROSS TECHNICAL RESERVES CASE STUDY: INSURANCE – REINSURANCE COMPANY ASTRA SA

    Directory of Open Access Journals (Sweden)

    IRINELA – CONSTANTINA BADEA

    2015-12-01

    Full Text Available The aim of this paper is to analyze the asset structure and the coverage of gross technical reserves of the Insurance – Reinsurance Company Astra SA, for the period 2003 – 2014. Insurance companies are required to constitute technical reserves, in order to cope with the payment obligations to policyholders. These reserves may only be covered on account of certain assets, admitted by law. In Romania, Orders No. 8 and 9/2011, issued by the Insurance Supervisory Commission, contain Rules regarding the assets admitted to cover gross technical reserves, the dispersion of assets admitted to cover gross technical reserves and the liquidity coefficient. Order No. 9/2011, relating to general insurance, has been amended by Rule No. 22/2014. In this paper, we have analyzed the main elements of Astra’s assets, their share in total assets and we have calculated the coverage of gross technical reserves by total assets and liquid assets. In 2013 and 2014, the value of total assets was below the value of gross tehnical reserves, which demonstrated Astra’s financial instability, through negative capital and the inability to meet the obligations to policyholders. Failure to comply with the prudential indicators has been one of the main causes of Astra`s bankruptcy.

  3. Association of therapeutic occasion, gross motor function grading and developmental level with gross motor functional recovery in children with cerebral palsy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    BACKGROUND: The abnormal posture and motor pattern have not stabilized in children with cerebral palsy at early period, thus timely treatment can establish normal postural reflex and motor pattern, and prevent complications of muscle contracture, ankylosis, skeletal deformity, etc. The clinical factors affecting the rehabilitative efficacy of gross motor function in children with cerebral palsy should be observed.OBJECTIVE: To observe the effects of therapeutic occasion, grading of gross motor function and developmental level on the rehabilitative efficacy in children with cerebral palsy.DESIGN: A case-controlled analysis.SETTING: Qilu Children's Hospital of Shandong University.PARTICIPANTS: Totally 138 children with cerebral palsy, who were hospitalized for 12 months in the Rehabilitation Center of Qilu Children's Hospital, Shandong University, were selected from April 2004 to September 2006, and all the children were diagnosed to be accorded with the standard set by the national seminar on cerebral palsy in 2004. There were 97 males and 41 females, including 55 cases of 0 - 2 years old,47 cases of 2 - 4 years and 36 cases of 4 - 6 years. Informed contents were obtained from relatives of all the children.METHODS: ① Comprehensive rehabilitation treatment: Vojta method was to induce the children to turn over the body and crawl by stimulating reflective turn over and crawling on belly. Bobath method including trainings of head control, turning over body, keeping sitting position, keeping balance, crawling, keeping standing position, and walking, etc.; The children were massaged by using the maneuvers of push, press, rub,pull, wave, etc. according to the sites and types of palsy. Acupuncture was performed mainly at bilateral motor areas, the needle was retained for 1 hour per time, 6 days continuously every week, and followed by a 1-day interval. ② Prognosis assessment: The gross motor functional grading of the children with cerebral palsy at admission was

  4. Ride comfort optimization of a multi-axle heavy motorized wheel dump truck based on virtual and real prototype experiment integrated Kriging model

    Directory of Open Access Journals (Sweden)

    Bian Gong

    2015-06-01

    Full Text Available The optimization of hydro-pneumatic suspension parameters of a multi-axle heavy motorized wheel dump truck is carried out based on virtual and real prototype experiment integrated Kriging model in this article. The root mean square of vertical vibration acceleration, in the center of sprung mass, is assigned as the optimization objective. The constraints are the natural frequency, the working stroke, and the dynamic load of wheels. The suspension structure for the truck is the adjustable hydro-pneumatic suspension with ideal vehicle nonlinear characteristics, integrated with elastic and damping elements. Also, the hydraulic systems of two adjacent hydro-pneumatic suspension are interconnected. Considering the high complexity of the engineering model, a novel kind of meta-model called virtual and real prototype experiment integrated Kriging is proposed in this article. The interpolation principle and the construction of virtual and real prototype experiment integrated Kriging model were elucidated. Being different from traditional Kriging, virtual and real prototype experiment integrated Kriging combines the respective advantages of actual test and Computer Aided Engineering simulation. Based on the virtual and real prototype experiment integrated Kriging model, the optimization results, obtained by experimental verification, showed significant improvement in the ride comfort by 12.48% for front suspension and 11.79% for rear suspension. Compared with traditional Kriging, the optimization effect was improved by 3.05% and 3.38% respectively. Virtual and real prototype experiment integrated Kriging provides an effective way to approach the optimal solution for the optimization of high-complexity engineering problems.

  5. Design on the Reversible Horizontal Axle Plate Ditching Machine%可换向水平轴圆盘开沟机的设计

    Institute of Scientific and Technical Information of China (English)

    郭辉; 苏刚; 韩长杰

    2013-01-01

    Based on the development status of ditching machine , especially for the rotating disc ditching machine , we de-sign this type of reversible horizontal axle plate ditching machine .The machine can overcome the weakness of the tradi-tional rotating disc offset ditching machine .Through prototype trial and test , the result is favorable and meets the require-ments of the design .The ditching machine has added a new type of equipment for the orchard .The ditching machine has the characteristic of flexible working in the orchard .The problem on the traditional machine has been resolved .%  针对开沟机特别是旋转圆盘式开沟机的发展现状,设计了一种可换向式水平轴圆盘开沟机。该机能够克服传统旋转圆盘式开沟机只能单侧开沟的不足,并对其关键工作部件进行了全面的设计。通过样机的试制和试验,效果良好,达到了设计的各项要求,为果园作业又增添了新型机具。可换向式开沟机具有灵活的特点,能够在果园环境工作,弥补了传统机具这方面的不足。

  6. Application Research on Virtual Assembly of Tractor's Front Drive Axle%拖拉机前驱动桥虚拟装配应用研究

    Institute of Scientific and Technical Information of China (English)

    曹文钢; 程五四; 宋军

    2011-01-01

    在分析和总结了虚拟装配技术研究现状的基础上,阐述了其原理,实施步骤以及关键技术的应用,并以拖拉机前驱动桥为虚拟装配对象,在计算机虚拟装配环境(Division Mockup)中装配并进行相应的装配检验,介绍生成装配序列与装配路径,并制作成装配动画的步骤,形象地展现产品的装配全过程.在(Division Mockup)中,以第三方插件为桥梁,借助由数据手套、位置跟踪器(FOB)、偏振眼镜和投影系统组建的虚拟现实环境,可以实现入机交互操作,并介绍了人机交互接口定义的规则和方法.%This paper analyzes and summarizes the current status of the virtual assembly technology research and elaborates its principle and implementing process. By taking the tractor's front drive axle as an object, a virtual assembly and its corresponding inspection is conducted in the computer virtual environment (Division Mockup). The generation assembly orders and routes are introduced. The procedure of assembly animation is set up to vividly exhibit the whole process of product assembly. By virtue of the third-party plug-in units and the virtual reality environment consisting of data gloves, polarization glasses, projection system, and position tracker (FOB), human-computer interaction can be achieved in Division Mockup. The rules and methods of human-computer interaction interface definitions are introduced as well.

  7. 基于DEFORM和正交试验法的前轴辊锻工艺优化%Research on optimization of front-axle roll forging technique based on DEFORM-3D and orthogonal experimental method

    Institute of Scientific and Technical Information of China (English)

    魏科; 王高潮; 李宁; 王志录

    2012-01-01

    正交试验主要用于解决科研和生产中多因素、多水平的问题,运用正交试验法可以在减少试验次数的情况下获得最佳的参数组合,可有效节约人力、物力和时间.在DEFORM-3D有限元数值模拟过程中应用正交试验优化设计方法,对前轴制坯辊锻模具弹簧座截面的圆角值、辊锻模具角速度、摩擦因子及坯料初始温度四因素、三水平问题,进行前轴制坯辊锻模具结构及工艺优化研究,分析影响前轴辊锻成形过程中最大成形载荷的因素,研究结果有利于前轴辊锻模具结构及工艺的优化,而且可有效提高辊锻模具的使用寿命.%The structure of front axle roll forging die and the roll forging process were optimized based on orthogonal experimental design method, using DEF0RM-3D software in finite element numerical simulation, adopting three levels and four factors, the latter including the fillet values of the spring seat section of the front axle roll forging die, the angular velocity of the roll forging die, the friction factor and the initial temperature of billets. The effecting factors of maximal forming load in the roll forging process of front axle were analyzed. The results can also increase the service life of roll forging die.

  8. Subjective evaluation experiments for minicar's rear axle driving gear%某微型汽车后桥驱动齿轮噪声的主观评价实验

    Institute of Scientific and Technical Information of China (English)

    田锐

    2011-01-01

    The rear axle driving gear is the main component of the vehicle driving axle, and noise is one of the main specifications for it. In this paper, the minicar's rear axle bevel gear produced by a factory in Guangdong is taken as a noise source, and the noise generated under the steady-state operation is the object of the experimental study, the paired comparison method is used for noise evaluation training and the scoring method for noise subjective evaluation expe-riments. Combining the objective noise parameters to conduct the subjective and objective sample correlation analysis shows that for the equal SPL gear noise, the greater the loudness value, the lower the people's preference extent. So, in addition to actively taking measures to reduce gear sound pressure level, reducing the loudness value is also an important approach to improving gear noise.%汽车后桥驱动齿轮是汽车驱动桥的主要部件,噪声是其主要指标之一.以广东某汽车后桥齿轮厂的微型汽车后桥锥齿轮为噪声源,采集其稳态运行情况下的噪声作为研究对象,以成对比较法进行噪声评价训练,采用等级评分法进行噪声的主观评价实验,结合噪声样本的客观参数进行主客观相关分析,说明在等声压级的齿轮噪声中,响度值越大的,人们对其偏好性越低,因此除积极采取措施降低齿轮声压级以外,降低响度值亦是改善价齿轮噪声的重要途径.

  9. Design and optimization of I-beam precision roll forging process for heavy truck front axle%某重卡前轴工字梁辊锻成形工艺设计及优化

    Institute of Scientific and Technical Information of China (English)

    张黎; 文琍; 夏江梅

    2012-01-01

    The under-filling defect of the I-beam, one of the typical defects on a heavy truck front axle in the precision roll forging process and die forging process was studied Firstly, the design of the precision roll forging process for the I-beam of the front axle was described. Then, the finite element numerical simulation analysis model was established with Deform-3D, and the influence of the thickness on the I-beam in the third step and the friction factor in the third and fourth step on filling percent of the die cavity was analyzed. Lastly, optimization for the precision roll forging process of the heavy truck front axle was finished. The optimized simulation results show that the I-beam forms well and can be filled fully to meet the requirements of design drawings.%针对某重卡前轴成形辊锻-模锻复合工艺中的典型缺陷——工字梁部位充不满展开研究.介绍了重卡前轴工字梁在辊锻成形工艺中各道次的孔型设计,通过Defoem-3D建立了有限元数值模拟分析模型,研究了第3道次预辊锻成形中工字梁壁厚和第3、4道次中摩擦因子对模具型腔填充率的影响规律,最后完成了重卡前轴工字梁在辊锻成形中的优化设计.优化后的模拟结果表明,工字梁成形良好、填充饱满,满足图纸设计要求.

  10. 前桥摆转式四轮底盘转向系统的转向机理研究%Research on the Steering Theory of Front Axle Swing Sowing Four-wheel Chassis

    Institute of Scientific and Technical Information of China (English)

    吕莹; 张静; 李志伟

    2016-01-01

    四轮底盘在小地块水田作业时,减少地头空行转弯时间是提高作业时间利用率的重要环节。为实现四轮底盘小半径转弯,以提高水田播插底盘作业率为主要研究目标,对四轮底盘在90°、180°等不同转弯形式下进行分析,得出适合小地块水稻播插作业时以较小转弯半径的转弯方式;前桥摆转四轮底盘在转向时,通过控制前桥驱动轮的转动,使前驱动桥主动围绕着转向装置转动,可以带动底盘以任意角度转向。采用ADAMS软件对四轮底盘后轮轨迹进行模拟,在确保后轮完全不吃入已完成作业区的倒U转弯方式的情况下,提出设计前桥摆转式四轮底盘转向系统的可行性。%Four-wheel chassis when working in a small piece of paddy field, reduce blank line turning time is an important link in work utilization rate operation time. In this paper, in order to realize four-wheel chassis small turning radius, increase the paddy field on chassis operation efficiency as the main research target, 90°, 180° in the four-wheel chassis under different forms of turning modeling analysis, and concluded that suitable turning way of smaller turning radius for small plot rice sowing operations ; When the front axle Swing four-wheel chassis steering, By controlling the rotation of the front drive axle, to the front drive axle can rotate active around the steering device, and drive the chassis steering in an arbitrary Angle; Through ADAMS soft-ware for simulating four-wheel chassis rear wheel track, and ensuring the rear wheels do not enter that the as-signments section has been completed, put forward to design front axle pendulum type four-wheel chassis steer-ing system operability.

  11. Light Weight Design and Analysis on Monocoque Coach with Whole Front Axle%整体前桥全承载车型轻量化设计与分析

    Institute of Scientific and Technical Information of China (English)

    陈乐强; 房继刚; 王淑丽; 许夏

    2014-01-01

    The authors simulate a monocoque coach with whole front axle by the CAE method in order to effectively reduce its weight under the condition of its bearing capacity. At the same time, the authors analyse the reliability and security of the steering gear fixture especially to the light weitht structure.%利用CAE仿真技术对公司某整体前桥全承载车型进行轻量化设计,为保证转向的安全性、可靠性,对减重后的转向安装结构进行单独分析。

  12. 采用移轴技术在SAP5程序实现刚体模态计算%Using the technology of moving the axle to compute the pattern of rigid body

    Institute of Scientific and Technical Information of China (English)

    施群德

    2001-01-01

    Elaborates how to use the technology of moving the axle to compute the pattern of rigid body,introduces this technology into the program SAP5 and realizes the calculation of the pattern of rigid body.%论述了如何采用移轴技术实现对刚体模态的计算,并将移轴求刚体模态的技术引入著名的SAP5程序中,实现了对刚体模态的计算。

  13. Gross N transformation rates after application of household compost or domestic sewage sludge to agricultural soil

    DEFF Research Database (Denmark)

    Ambus, P.; Kure, L.K.; Jensen, E.S.

    2002-01-01

    Gross N mineralization and immobilization was examined in soil amended with compost and sewage sludge on seven occasions during a year using N-15 pool dilution and enrichment techniques. Gross N mineralization was initially stimulated with both wastes and accelerated through the first 112 days...... of incubation, peaking at 5 mg N.kg(-1).d(-1) with compost compared with 4 mg N.kg(-1).d(-1) in control and sludge-treated soil. The magnitudes of mineralization rates exceeded those of immobilization by on average 6.3 ( compost) and 11.4 ( sludge) times, leading to a persistent net N mineralization cumulating...... up to 160 mg N.kg(-1) soil(compost) and 54 mg N.kg(-1) soil (sludge) over the season from May to November. The numerical model FLUAZ comprehensively predicted rates of gross mineralization and immobilization. Sludge exhibited an early season N-release, whereas compost released only 10% of the N...

  14. Gross β activity level of fallout in the environment around Qinshan Nuclear Power Plant

    Institute of Scientific and Technical Information of China (English)

    YE Ji-Da; CHEN Bin; WU Zong-Mei

    2005-01-01

    This paper presents the measurement results of gross β activities in fallout samples collected from the environment around Qinshan Nuclear Power Plant (NPP) during 1993-2002. The gross β activity of 191 samples collected at five monitoring spots were (0.11~3.64) Bq · m-2 · d-1, with an average of (0.91 ±0.49) Bq · m-2 · d-1. This value was lower than (1.02±0.35) Bq·m-2·d-1 , the average of the samples collected at the reference spot in Hangzhou.It indicated that no obvious rise in the gross β activity level of fallout was observed in ambience of Qinshan NPP.

  15. Integrable Gross-Neveu models with fermion-fermion and fermion-antifermion pairing

    CERN Document Server

    Thies, Michael

    2014-01-01

    The massless Gross-Neveu and chiral Gross-Neveu models are well known examples of integrable quantum field theories in 1+1 dimensions. We address the question whether integrability is preserved if one either replaces the four-fermion interaction in fermion-antifermion channels by a dual interaction in fermion-fermion channels, or if one adds such a dual interaction to an existing integrable model. The relativistic Hartree-Fock-Bogoliubov approach is adequate to deal with the large N limit of such models. In this way, we construct and solve three integrable models with Cooper pairing. We also identify a candidate for a fourth integrable model with maximal kinematic symmetry, the "perfect" Gross-Neveu model. This type of field theories can serve as exactly solvable toy models for color superconductivity in quantum chromodynamics.

  16. Financial Variables Effect on the U.S. Gross Private Domestic Investment (GPDI) 1959-2001

    CERN Document Server

    Bell, Byron E

    2007-01-01

    I studied what role the US stock markets and money markets have possibly played in the Gross Private Domestic Investment (GPDI) of the United States from the year 1959 to the year 2001, Gross Private Domestic Investment refers to the total amount of investment spending by businesses and firms located within the borders of a nation. It includes both the values of the purchases of non-residential fixed investment, which include capital goods used for production, and the values of the purchases of residential fixed investment, which include construction spending for factories or offices. And I created a Multiple Linear Regression Model of the GDPI. To see if companies and private citizens use the stock market and money markets as a way of financing capital projects (business ventures, buying commercial and noncommercial property, etc). Keywords: Gross Private Domestic Investment, Pearson Correlation, SP 500, TB3

  17. EFFECT OF SENSORY INTEGRATION THERAPY ON GROSS MOTOR FUNCTION IN CHILDREN WITH CEREBRAL PALSY

    Directory of Open Access Journals (Sweden)

    A.R. Shamsoddini

    2009-04-01

    Full Text Available ObjectiveThe primary problem in children with cerebral palsy (CP, frequently referred for occupational therapy, is gross motor dysfunction. The current study was designed to investigate the effects of sensory integration therapy (SIT on gross motor skills in CP patients.Materials & MethodsTwenty-four children with diplegic spastic CP were randomly divided into two groups: First group (n=14,6 girls, 8 boys, age range 2 to 6 years, mean age 3.9 years; the second or control group (n=10, 5 girls, 5 boys, age range 2 to 6 years, mean age 3.4 years. SIT training was given to the first group and only the home program was given for the second group. All children were evaluated with gross motor function measurement (GMFM 88 for rolling, sitting, crawling, standing and walking position before and after intervention. Treatment duration for both groups was 1 hour, 5 days per week for a period of 12 weeks.ResultsGross motor function in children of the case group improved significantly better that in the control group, after intervention in sitting (P=0.02, crawling (P=0.001 and standing (P=0.03 positions; however no significant difference was seen in rolling (P=0.65 and walking (P=0.69 ability assessment.ConclusionThis study showed the beneficial effects of the SIT training program for children with CP; the SIT intervention had a significantly positive effect on gross motor function in the children with diplegic spastic CP. Moreover the results of the present study showed that sensory integration and vestibular stimulation were effective in children with cerebral palsy.Keywords:Cerebral palsy, Children, Gross motor, Occupational therapy, Sensory integration

  18. Acute gross sterile pyuria after oral ciprofloxacin treatment of urinary tract infection

    Institute of Scientific and Technical Information of China (English)

    Pathoom Sukkaromdee; Viroj Wiwanitkit

    2016-01-01

    The sterile pyuria is an interesting problem in urology. Acute gross sterile pyuria is not a common clinical problem and is difficult to make a correct diagnosis. Here, the authors reported a case of acute gross sterile pyuria after oral ciprofloxacin treatment of urinary tract infection. The patient developed problem after complete course of 7-day acute upper urinary tract treatment. The patient was observed with cloudy whitish urine that had never seen before. The urinalysis showed sterile pyuria. This case was treated by conservative method and the problem was resolved within 7 days.

  19. Btryoid Wilm's tumor in a child presenting with gross hematuria: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Park, Chae Jung; Im, Young Jae; Shin, Hyun Joo; Kim, Myung Joon; Lee, Mi Jung [Severance Children' s Hospital, Yonsei University College of Medicine, Seoul (Korea, Republic of)

    2016-09-15

    We report a unique case of botryoid Wilms' tumor with its characteristic imaging findings in a 5-month-old boy presenting with gross hematuria. In our case, ultrasonography revealed lobulated hyperechoic lesions filling the pelvicalyceal system without parenchymal invasion, mimicking a blood clot. However, magnetic resonance imaging (MRI) demonstrated the exact extent of the lesion with diffusion restriction and delayed enhancement suggestive of a tumor. Despite their rarity, botryoid Wilms' tumors should be included in the differential diagnosis of lobulated renal pelvic lesions presenting as gross hematuria in children, and MRI can suggest the diagnosis.

  20. MODELING AND FORECASTING THE GROSS ENROLLMENT RATIO IN ROMANIAN PRIMARY SCHOOL

    Directory of Open Access Journals (Sweden)

    MARINOIU CRISTIAN

    2014-06-01

    Full Text Available The gross enrollment ratio in primary school is one of the basic indicators used in order to evaluate the proposed objectives of the educational system. Knowing its evolution allows a more rigorous substantiation of the strategies and of the human resources politics not only from the educational field but also from the economic one. In this paper we propose an econometric model in order to describe the gross enrollment ratio in Romanian primary school and we achieve its prediction for the next years, having as a guide the Box-Jenkins’s methodology. The obtained results indicate the continuous decrease of this rate for the next years.

  1. Improving gross motor function and postural control with hippotherapy in children with Down syndrome: case reports.

    Science.gov (United States)

    Champagne, Danielle; Dugas, Claude

    2010-11-01

    The purpose of this case report is to describe the impact of an 11-week hippotherapy program on the gross motor functions of two children (respectively 28 and 37 months old) diagnosed with Down syndrome. Hippotherapy is a strategy that uses the horse's motion to stimulate and enhance muscle contraction and postural control. The children were assessed by the Gross Motor Function Measure (GMFM) and accelerometry. The results indicate that both children improved on many dimensions of the GMFM. Power spectral analysis of the acceleration signals showed improvement in postural control of either the head or trunk, because the children adopted two different adaptative strategies to perturbation induced by the moving horse.

  2. Production of table potatoes in Europe – a multinational gross margin analysis

    DEFF Research Database (Denmark)

    Pedersen, Søren Marcus; Bizik, J.; Dalla Costa, L.

    2005-01-01

    This paper examines different cropping practies, cost structures and gross margins for conventional table potato cropping in 6 different regions within the European Union: Czech Republic, Denmark, Italy, Poland, Portugal and Slovakia. Findings from this study show that potato cropping practies...... varies significantly between the various countries with major differences in yield and costs. Italy and Denmark are two regions with highest gross margins due to hight yields and revenues. Poland is by far the largest potato producing country among the 6 countries. The production is primarily based...

  3. No First-Order Phase Transition in the Gross-Neveu Model?

    CERN Document Server

    Brzoska, A; Brzoska, Andrej; Thies, Michael

    2002-01-01

    Within a variational calculation we investigate the role of baryons for the structure of dense matter in the Gross-Neveu model. We construct a trial ground state at finite baryon density which breaks translational invariance. Its scalar potential interpolates between widely spaced kinks and antikinks at low density and the value zero at infinite density. Its energy is lower than the one of the standard Fermi gas at all densities considered. This suggests that the discrete gamma_5 symmetry of the Gross-Neveu model does not get restored in a first order phase transition at finite density, at variance with common wisdom.

  4. Effects of Variation in Truck Factor on Pavement Performance in Pakistan

    Directory of Open Access Journals (Sweden)

    Rabia Chaudry

    2013-01-01

    Full Text Available Seasonal variation coupled with heavy axle loading is the key factor in rapid road deterioration in Pakistan. The serviceability loss is further accelerated by the fact that truck drivers and owners consider overloading as a profitable practice unaware of the adverse effects of this practice. Weigh-in-motion data from two stations located between two major cities of Pakistan (Peshawar and Rawalpindi on Grand Trunk Road (N-5 were collected and analyzed. Analysis of variance and comparison of actual and designed truck factor were performed to identify the most damaging axle truck type. It was found that axle truck type 3 (single/tandem axle is most damaging among all truck types. The actual truck factor for axle truck type 3 is 6.4 times greater than design truck factor. Regression expressions of different forms were also investigated to determine the relationship between truck factor and gross vehicular weight for the specified truck types. An optimum generalization strategy was used to prevent over-generalization and ensure accuracy. For data analysis, 75% of data was used to develop regression models and remaining 25% was to validate those models. The results show that the polynomial expressions performed best and provide a robust relationship that can be employed by the highway authorities to estimate truck factor from gross vehicular weight with a high degree of confidence. It was also observed that damaging effect of various types of trucks was very severe and quite high.

  5. The Optimization Design of Steering Trapezium Frame for A double front axles truck%某双前桥载货车转向梯形机构优化设计

    Institute of Scientific and Technical Information of China (English)

    王俊伟; 王定华; 李海波

    2016-01-01

    In this paper, the turning angles relationship of the internal and exernal wheels in the first axle was gotten in analytic method. And the optimization equations were established by the length of steering trapezium armm and steering trapezium cornerθ. Then the program about the optimization of steering trapezium structure was written with MATLAB and emulated for the steering trapezium of double front axle truck. The result was improved obviously after optimization.%文章采用解析法推导了前桥内外轮之间的转角关系,并以梯形臂长 m,梯形底角θ为优化变量建立优化方程,最后并应用MATLAB软件编制了“转向梯形机构优化设计”程序,对某双前桥载货车转向梯形进行了优化,优化结果显示优化效果明显,达到了设计目的。

  6. Failure Forms and Restoration Methods of the Automotive Front Axle Roll Forging Die%汽车前轴辊锻模的失效形式与修复方法

    Institute of Scientific and Technical Information of China (English)

    王洪强; 姬程程; 夏华

    2012-01-01

    The automotive front axle roll forging die works in severe conditions and its stress state is more complex. Based on the consideration of materials selection, structural design, manufacturing process, heat treatment procedure as well as the installation and maintenance of the mould, the analysis of the causes of the automotive front axle roll forging die's main failure forms (fracture, wear, deformation, and so on) is introduced, and the improvement measures and restoration methods are proposed correspondingly.%从材料的选择、结构设计、制造工艺、热处理工艺以及模具的安装维护等方面分析汽车前轴辊锻模的主要失效形式(断裂、磨损、变形等)产生的原因,并提出相应的改进措施和修复方法。

  7. 艺术铸造领域CNC机器人七轴加工设备用于石膏模型雕塑%Application of CNC Robot Seven-axle Working Equipment to Carving Gypsum Mold in Art Casting Field

    Institute of Scientific and Technical Information of China (English)

    胡春良

    2016-01-01

    CNC robot seven-axle working equipment consists of a power-driven main shaft controlled by the robot, an automatic programming software and a software used for controlling manipulator operation, and makes it possible to realize automatic carving of a complex stereometric moulding. The special equipment used in carving gypsum mould by the CNC robot seven-axle working equipment allow large-scale sculpture templating technology to obtain signiifcant progress.%CNC机器人七轴加工设备由一个工业机器人控制电动主轴、多轴自动编程软件和用于控制机械手运行的软件组合而成,可实现复杂立体造型的自动化雕刻加工。CNC机器人七轴加工雕塑石膏模型专用设备,实现了艺术铸造大型雕塑放样的一大跨越。

  8. 桥壳中段同轴度测量装置的结构设计%The Structure Design of Concentricity Measurement Device for the Middle Casting Shell of Axle

    Institute of Scientific and Technical Information of China (English)

    蔡士祥

    2014-01-01

    In order to improve the accuracy and effectiveness of measurement for the middle cast axle we use special measuring equipment for onsite measurement , and control important characteristics of the product . Through deep analysis of the structure and measurement requirements for the product , we find solutions to multi-point probe structure , probe point protection and fast switching devices among different products , which guarantees the middle cast axle to be measured onsite based on the device ,and also makes a creative exploration for the dynamic control of the product's quality .%为提高铸造桥壳中段测量精度和测量效率,文中提出采用专用测量设备实现在线测量,动态控制产品重要特性指标。通过对产品结构和测量要求的深入分析,找出了测量装置设计中多点测头、测头防护、多品种快速切换装置等技术难点的解决方案,实现了铸造桥壳中段基于该装置实时在线测量,为桥壳中段的动态质量控制做出了创造性的探索。

  9. SYNTHESIS AND CHARACTERIZATION OF POLYROTAXANES MADE FROM α-CDs THREADED ONTO TRIBLOCK COPOLYMERS WITH PEG AS A CENTRAL AXLE AND FLANKED BY TWO LOW MOLECULAR WEIGHT POLYSTYRENES AS OUTER STOPPERS

    Institute of Scientific and Technical Information of China (English)

    Xin-ming Tong; Dan-dan Hou; Xiao-wen Zhang; Lin Ye; Ai-ying Zhang; Zeng-guo Feng

    2008-01-01

    A study has been conducted on the synthesis and characterization of a kind of novel polyrotaxanes comprising α cyclodextrins (α-CDs) threaded on triblock copolymers with poly(ethylene glycol) (PEG) as a central axle and flanked by two low molecular weight polystyrenes as outer stoppers.Styrene was allowed to telomerize with polypseudorotaxanes as chain transfer agents made from the self-assembly of a distal thiol-capped PEG with a varying amount of α-CDs in the presence of a redox initiation system at 40℃ in aqueous solutions.The resulting polyrotaxanes were characterized in detail by 1H-NMR,FTIR,XRD,TG and DSC analyses.The findings from the study demonstrated that the low molecular weight polystyrenes were successfully attached to two axle terminals of polypseudorotaxanes,and the number of α-CDs threaded onto the PEG backbone was tunable by varying its molar feeding ratio to some extent,while the polymerization degree of PS nearly remained constant in this radical telomerization process.

  10. Analysis on the Residual Braking Performance of Multi-axle Vehicles Based on ECE Regulation%基于ECE法规的多轴汽车剩余制动性能分析

    Institute of Scientific and Technical Information of China (English)

    童成前; 何仁; 周燕; 高树新

    2011-01-01

    根据ECE制动法规对行车制动失效条件下的多轴汽车剩余制动性能的要求,提出基于ECE制动法规的多轴汽车剩余制动性能分析方法,包括理论分析和试验验证.在理论分析中,最大减速度采用作图分析方法求得.最后,通过实例来说明本方法的分析过程.结果表明:该方法简单、实用.%According to the requirements of residual braking performance of multi-axle vehicles in the event of service braking failure specified in ECE regulation, an analysis method of residual braking performance of multi-axle vehicles based on ECE regulation is proposed, including theoretical analysis and test verification. In theoretical analysis,the maximum deceleration is evaluated by mapping. Finally,the method is illustrated by an analysis on a real case. The results indicate that the method is simple and practical.

  11. Gross hepatomegaly due to ‘minimal change’ liver disease in a young female alcoholic

    OpenAIRE

    Majumdar, Sisir K.; Shaw, G K; Aps, E. J.; Thomson, Allan D.; O Gorman, P.; Bugler, J.

    1982-01-01

    The case of a grossly enlarged liver due to alcohol excess in a woman of 21 is reported. This case further demonstrates that a chronic alcoholic can have gross hepatomegaly with normal histology and normal liver function tests. The possible pathogenetic basis of ethanol-induced hepatomegaly (‘minimal change’ liver disease) is discussed.

  12. 26 CFR 1.62-1T - Adjusted gross income (temporary).

    Science.gov (United States)

    2010-04-01

    ... section 165 for losses incurred in any transaction entered into for profit though not connected with a... determining adjusted gross income, expenses must be those directly, and not those merely remotely, connected... research scientist, is employed by Corporation X. B gives a speech before members of Association Y,...

  13. Terrestrial gross carbon dioxide uptake: Global distribution and covariation with climate

    NARCIS (Netherlands)

    Beer, C.; Veenendaal, E.M.

    2010-01-01

    Terrestrial gross primary production (GPP) is the largest global CO2 flux driving several ecosystem functions. We provide an observation-based estimate of this flux at 123 ± 8 petagrams of carbon per year (Pg C year-1) using eddy covariance flux data and various diagnostic models. Tropical forests

  14. 7 CFR 1400.501 - Determination of average adjusted gross income.

    Science.gov (United States)

    2010-01-01

    ... renewable energy; (4) The sale, including the sale of easements and development rights, of farm, ranch... renewable energy; (7) The feeding, rearing, or finishing of livestock; (8) The sale of land that has been..., and farm operations. (c) Except as otherwise provided in this subpart, adjusted gross income means:...

  15. Development of the Gross Motor Function Classification System for Cerebral Palsy

    Science.gov (United States)

    Rosenbaum, Peter L.; Palisano, Robert J.; Bartlett, Doreen J.; Galuppi, Barbara E.; Russell, Dianne J.

    2008-01-01

    The Gross Motor Function Classification System (GMFCS) for cerebral palsy has been widely used internationally for clinical, research, and administrative purposes. This paper recounts the ideas and work behind the creation of the GMFCS, reports on the lessons learned, and identifies some philosophical challenges inherent in trying to develop an…

  16. The gross motor function measure is a valid and sensitive outcome measure for spinal muscular atrophy.

    Science.gov (United States)

    Nelson, Leslie; Owens, Hollis; Hynan, Linda S; Iannaccone, Susan T

    2006-06-01

    Spinal muscular atrophy is a genetic disease of the anterior horn cell with high morbidity rate in childhood. Certain drugs may be of benefit and are in or under consideration for Phase II trials. Outcome measures that are age appropriate and representative of disease activity remain under study. Several have not yet been validated for spinal muscular atrophy. The Gross Motor Function Measure is a measure of motor function. We showed previously that the Gross Motor Function Measure is a reliable outcome measure to assess motor function in children with spinal muscular atrophy. By collating our data from 40 spinal muscular atrophy patients, ages 5 through 17 years, we now show the validity of the Gross Motor Function Measure when compared to Quantitative Muscle Testing and ambulatory status in children with spinal muscular atrophy. The median for Gross Motor Function Measure total scores for walkers was 237 (range: 197-261) and for non-walkers, 64 (range: 4-177; PGross Motor Function Measure is valid and sensitive as an outcome measure for clinical trials in pediatric spinal muscular atrophy.

  17. Stereoscopic Anatomy: Evaluation of a New Teaching System in Human Gross Anatomy

    Science.gov (United States)

    Prentice, Ernest D.; And Others

    1977-01-01

    A stereoscopic slide-based autoinstructional program has been developed as a substitute for dissection in teaching gross anatomy. Evaluation data suggest that this program, while having minor limitations in terms of anatomical orientation, does provide a viable alternative to dissection. (Editor/LBH)

  18. Student performance on practical gross anatomy examinations is not affected by assessment modality.

    Science.gov (United States)

    Meyer, Amanda J; Innes, Stanley I; Stomski, Norman J; Armson, Anthony J

    2016-01-01

    Anatomical education is becoming modernized, not only in its teaching and learning, but also in its assessment formats. Traditional "steeplechase" examinations are being replaced with online gross anatomy examinations. The aims of this study were to: (1) determine if online anatomy practical examinations are equivalent to traditional anatomy practical examinations; and (2) to examine if students' perceptions of the online or laboratory testing environments influenced their performance on the examinations. In phase one, 10 third-year students were interviewed to generate perception items to which five anatomy lecturers assigned content validity. In phase two, students' gross anatomical knowledge was assessed by examinations in two modes and their perceptions were examined using the devised survey instrument. Forty-five second-year chiropractic students voluntarily participated in Phase Two. The two randomly allocated groups completed the examinations in a sequential cross-over manner. Student performance on the gross anatomy examination was not different between traditional "steeplechase" (mean ± standard deviation (SD): 69 ± 11%) and online (68 ± 15%) modes. The majority of students (87%) agreed that they felt comfortable using computers for gross anatomy examinations. However, fewer students found it easy to orientate images of cadaver specimens online. The majority of students (85%) agreed that they felt comfortable working with cadavers but there was less agreement on the effect of moving around the laboratory during practical examinations. This data will allow anatomists to confidently implement online assessments without fear of jeopardizing academic rigor or student performance. © 2015 American Association of Anatomists.

  19. Macroeconomic Models used in the Structural Analysis of the Gross Domestic Product

    Directory of Open Access Journals (Sweden)

    Constantin Anghelache

    2013-07-01

    Full Text Available This paper describes a use case for macro economical models, the objective being the structural analysis of the Gross Domestic Product. The authors offer a snapshot on GDP evolution, the econometric models proposed for analysis are designed with the help of EViews software. Its performances are determined through the optics of the statistical tests.

  20. Scattering and duality in the 2 dimensional OSp(2|2) gross neveu and sigma models

    NARCIS (Netherlands)

    Saleur, H.; Pozsgay, B.

    2010-01-01

    We write the thermodynamic Bethe ansatz for the massive OSp(2|2) Gross Neveu and sigma models. We find evidence that the GN S matrix proposed by Bassi and Leclair [12] is the correct one. We determine features of the sigma model S matrix, which seem highly unconventional; we conjecture in particular

  1. Gross and microscopic pathology of hard and soft corals in New Caledonia

    Science.gov (United States)

    Work, Thierry M.; Aeby, Greta S.; Lasne, Gregory; Tribollet, Aline

    2014-01-01

    We surveyed the reefs of Grande Terre, New Caledonia, for coral diseases in 2010 and 2013. Lesions encountered in hard and soft corals were systematically described at the gross and microscopic level. We sampled paired and normal tissues from 101 and 65 colonies in 2010 and 2013, respectively, comprising 51 species of corals from 27 genera. Tissue loss was the most common gross lesion sampled (40%) followed by discoloration (28%), growth anomalies (13%), bleaching (10%), and flatworm infestation (1%). When grouped by gross lesions, the diversity of microscopic lesions as measured by Shannon–Wiener index was highest for tissue loss, followed by discoloration, bleaching, and growth anomaly. Our findings document an extension of the range of certain diseases such as Porites trematodiasis and endolithic hypermycosis (dark spots) to the Western Pacific as well as the presence of a putative cnidarian endosymbiont. We also expand the range of species infected by cell-associated microbial aggregates, and confirm the trend that these aggregates predominate in dominant genera of corals in the Indo-Pacific. This study highlights the importance of including histopathology as an integral component of baseline coral disease surveys, because a given gross lesion might be associated with multiple potential causative agents.

  2. 48 CFR 29.401-4 - New Mexico gross receipts and compensating tax.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false New Mexico gross receipts and compensating tax. 29.401-4 Section 29.401-4 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS TAXES Contract Clauses 29.401-4 New Mexico...

  3. 20 CFR 10.712 - What amounts are included in the gross recovery?

    Science.gov (United States)

    2010-04-01

    ... recovery? 10.712 Section 10.712 Employees' Benefits OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF... gross recovery? (a) When a settlement or judgment is paid to, or for, one individual, the entire amount... recovery. If a settlement or judgment is paid to or for more than one individual or in more than...

  4. Gross genomic damage measured by DNA image cytometry independently predicts gastric cancer patient survival

    NARCIS (Netherlands)

    Belien, J.A.M.; Buffart, T.E.; Gill, A.; Broeckaert, M.A.M.; Quirke, P.; Meijer, G.A.; Grabsch, H.

    2009-01-01

    BACKGROUND: DNA aneuploidy reflects gross genomic changes. It can be measured by flow cytometry (FCM-DNA) or image cytometry (ICM-DNA). In gastric cancer, the prevalence of DNA aneuploidy has been reported to range from 27 to 100%, with conflicting associations with clinicopathological variables. Th

  5. Medical gross anatomy as a predictor of performance on the USMLE Step 1.

    Science.gov (United States)

    Peterson, Cathryn A; Tucker, Richard P

    2005-03-01

    Traditional predictors of medical school performance, such as Medical College Admission Test (MCAT) scores and grade point averages, are often used during the admissions process to help identify the prospective students who are most likely to complete the basic science portion of the curriculum successfully. Here we analyzed the admissions files and student records of 285 first-year medical students who matriculated at the University of California at Davis School of Medicine between 1999 and 2001 to determine if performance in medical gross anatomy is a similar, if not better, predictor of performance on the United States Medical Licensing Examination (USMLE) Step 1 than traditional predictors used by medical school admissions committees. Though MCAT scores and grade point averages were correlated with scores on the USMLE Step 1, only the score on the biological science section of the MCAT was significantly correlated with passing the licensing examination. In contrast, class rank in medical gross anatomy and the score on a gross anatomy comprehensive final examination were correlated both with scores on the USMLE Step 1 and passing the examination. Our results indicate that medical schools should consider performance in medical gross anatomy just as much, if not more, than traditional predictors of medical school performance when trying to identify students who may need more time or tutoring to pass the licensing examination.

  6. Gross motor skills and sports participation of children with visual impairments

    NARCIS (Netherlands)

    Houwen, S; Visscher, C.; Hartman, E.; Lemmink, K.A.P.M.

    2007-01-01

    Gross motor skill performance of children with visual impairments and its association with the degree of visual impairment and sports participation was examined. Twenty children with visual impairments (M age = 9.2 years, SD =1.5) and 100 sighted children (M age = 9.1 years, SD = 1.5) from mainstrea

  7. Assessment of Preschoolers' Gross Motor Proficiency: Revisiting Bruininks-Oseretsky Test of Motor Proficiency

    Science.gov (United States)

    Lam, Hazel Mei Yung

    2011-01-01

    Literature reveals that there are very few validated motor proficiency tests for young children. According to Gallahue and Ozmun, the Bruininks-Oseretsky Test of Motor Proficiency is a valid test. However, manipulative skills, which are classified as gross motor skills by most motor development specialists, are only tested in the Upper Limb…

  8. Gross Motor Performance and Physical Fitness in Children with Psychiatric Disorders

    Science.gov (United States)

    Emck, Claudia; Bosscher, Ruud J.; van Wieringen, Piet C. W.; Doreleijers, Theo; Beek, Peter J.

    2011-01-01

    Aim: Gross motor performance appears to be impaired in children with psychiatric disorders but little is known about which skill domains are affected in each disorder, nor about possible accompanying deficits in physical fitness. The present study has sought to provide information about these issues in children with emotional, behavioural, and…

  9. Comparison of a Gross Anatomy Laboratory to Online Anatomy Software for Teaching Anatomy

    Science.gov (United States)

    Mathiowetz, Virgil; Yu, Chih-Huang; Quake-Rapp, Cindee

    2016-01-01

    This study was designed to assess the grades, self-perceived learning, and satisfaction between occupational therapy students who used a gross anatomy laboratory versus online anatomy software (AnatomyTV) as tools to learn anatomy at a large public university and a satellite campus in the mid-western United States. The goal was to determine if…

  10. Medical Student Preferences for Self-Directed Study Resources in Gross Anatomy

    Science.gov (United States)

    Choi-Lundberg, Derek L.; Low, Tze Feng; Patman, Phillip; Turner, Paul; Sinha, Sankar N.

    2016-01-01

    Gross anatomy instruction in medical curricula involve a range of resources and activities including dissection, prosected specimens, anatomical models, radiological images, surface anatomy, textbooks, atlases, and computer-assisted learning (CAL). These resources and activities are underpinned by the expectation that students will actively engage…

  11. Student Performance on Practical Gross Anatomy Examinations Is Not Affected by Assessment Modality

    Science.gov (United States)

    Meyer, Amanda J.; Innes, Stanley I.; Stomski, Norman J.; Armson, Anthony J.

    2016-01-01

    Anatomical education is becoming modernized, not only in its teaching and learning, but also in its assessment formats. Traditional "steeplechase" examinations are being replaced with online gross anatomy examinations. The aims of this study were to: (1) determine if online anatomy practical examinations are equivalent to traditional…

  12. Effects of winter flooding on mass and gross energy of bottomland hardwood acorns

    Science.gov (United States)

    Alan G. Leach; Jacob N. Straub; Richard M. Kaminski; Andrew W. Ezell; Tracy S. Hawkins; Theodor D. Leininger

    2012-01-01

    Decomposition of red oak acorns (Quercus spp.; Section Erythrobalanus) could decrease forage biomass and gross energy (GE) available to wintering ducks from acorns. We estimated changes in mass and GE for 3 species of red oak acorns in flooded and non-flooded bottomland hardwood forests in Mississippi during winter 2009–2010. Mass...

  13. Method of Multi-dimensional Gross Errors Snooping of GPS Velocity Estimation in Airborne Gravimetry

    Directory of Open Access Journals (Sweden)

    ZHENG Kai

    2016-06-01

    Full Text Available Precision velocity plays an important role in airborne gravimetry. Since the aircraft in a state of stable flight, we could establish a strict state equation with constant acceleration model for it, then obtained predicted velocity which was used for constructing a priori residual Q to detect the gross errors. Theoretical research showed that Q was influenced by the accuracy of predicted velocity and the measurement errors. According to the statistical features of Q combined with IGG Ⅲ principle, we could lower the contribution of the observation that contained the gross errors. Static testing was used for analyzing the characteristic of measurement errors as well as the accuracy of predicted velocity under the simulated ideal flight environment where the acceleration was approximate to a constant, the results also showed the relationship between the sampling rate and the ability of detecting gross errors. Both the static and kinematic tests demonstrate that new method can well detect the gross error smaller than 1 cycle.

  14. Self-Pacing a Gross Motor Skills Course: Crawler Tractor Operator, MOS 62E20.

    Science.gov (United States)

    Brennan, Mark F.; Taylor, John E.

    As part of the Army's emphasis on performance-oriented instruction in training centers, a study was conducted to determine the feasibility of using self-paced instruction in a gross motor skills course. The Crawler Tractor Operator Course, a seven-week heavy equipment course conducted at Fort Leonard Wood, Missouri was selected for the study…

  15. Gross Square Feet Per Student. IssueTrak: A CEFPI Brief on Educational Facility Issues.

    Science.gov (United States)

    Wohlers, Art

    The Council of Educational Facility Planners International regularly provides the recommended number of gross square feet (gsf) per student figures. This report provides revised numbers based on responses from its Design Portfolio winners over the past 5 years. Average national averages of square footage space per student for Canada and the…

  16. A longitudinal study on gross motor development in children with learning disorders

    NARCIS (Netherlands)

    Westendorp, Marieke; Hartman, Esther; Houwen, Suzanne; Huijgen, Barbara C. H.; Smith, Joanne; Visscher, Chris

    This longitudinal study examined the development of gross motor skills, and sex-differences therein, in 7; to 11-years-old children with learning disorders (LD) and compared the results with typically developing children to determine the performance level of children with LD. In children with LD (n

  17. Remarks on the Blow-Up Solutions for the Critical Gross-Pitaevskii Equation

    Directory of Open Access Journals (Sweden)

    Xiaoguang Li

    2013-01-01

    Full Text Available This paper is concerned with the blow-up solutions of the critical Gross-Pitaevskii equation, which models the Bose-Einstein condensate. The existence and qualitative properties of the minimal blow-up solutions are obtained.

  18. Gross motor skills and sports participation of children with visual impairments

    NARCIS (Netherlands)

    Houwen, S; Visscher, C.; Hartman, E.; Lemmink, K.A.P.M.

    Gross motor skill performance of children with visual impairments and its association with the degree of visual impairment and sports participation was examined. Twenty children with visual impairments (M age = 9.2 years, SD =1.5) and 100 sighted children (M age = 9.1 years, SD = 1.5) from

  19. Hydrodynamical form for the one-dimensional Gross-Pitaevskii equation

    Directory of Open Access Journals (Sweden)

    Haidar Mohamad

    2014-06-01

    Full Text Available We establish a well-posedness result for the hydrodynamical form (HGP of the one dimensional Gross-Pitaevskii equation (GP via the classical form of this equation. The result established in this way proves that (HGP is locally well-posed since the solution of (GP can vanished at some $t\

  20. The effect of ambient temperature on gross-efficiency in cycling

    NARCIS (Netherlands)

    Hettinga, F.J.; Koning, J.J. de; Vrijer, A. de; Wüst, R.C.I.; Daanen, H.A.M.; Foster, C.

    2007-01-01

    Time-trial performance deteriorates in the heat. This might potentially be the result of a temperature-induced decrease in gross-efficiency (GE). The effect of high ambient temperature on GE during cycling will be studied, with the intent of determining if a heat-induced change in GE could account f