WorldWideScience

Sample records for gross chemical composition

  1. Aspects Regarding the Gross Chemical Composition and Fatty Acids Content of Some By-Products Obtained from the Biofuel Industry

    Directory of Open Access Journals (Sweden)

    Olimpia Colibar

    2010-05-01

    Full Text Available Samples of by-products, obtained from the production of biofuels were collected. These products were introduced in different proportions in feed rations of fattening lambs. Gross chemical composition of feed was analyzed and compared with mean reference values. Ash and cellulose content does not influence the results. The percentage of raw protein, specific for each feed, is correlated with the body weight gain. Fat quantity of rape meal is the closest to that of granulated feed and also the highest compared with the other groups, so that it can justify the higher productive performance achieved by group 1, who received rape meal in ratio. The concentration of fatty acids was determined from analyzed feed after oils extraction, their saponification and their reading with a HPLC. The data showed that the fatty acid level is relatively close to that specified in the literature. Euricic acid, that is responsible for the toxic potential of the rape, has been found in rape meal.

  2. Characterizing the development of sectoral gross domestic product composition.

    Science.gov (United States)

    Lutz, Raphael; Spies, Michael; Reusser, Dominik E; Kropp, Jürgen P; Rybski, Diego

    2013-07-01

    We consider the sectoral composition of a country's gross domestic product (GDP), i.e., the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations, we characterize the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing four country-specific parameters. Relating the agrarian with the industrial sector, a data collapse over all countries and all years supports the applicability of our approach. Depending on the parameter ranges, country development exhibits different transfer properties. Most countries follow three of eight characteristic paths. The types are not random but show distinct geographic and development patterns.

  3. Proximate analysis, backwards stepwise regression between gross calorific value, ultimate and chemical analysis of wood.

    Science.gov (United States)

    Telmo, C; Lousada, J; Moreira, N

    2010-06-01

    The gross calorific value (GCV), proximate, ultimate and chemical analysis of debark wood in Portugal were studied, for future utilization in wood pellets industry and the results compared with CEN/TS 14961. The relationship between GCV, ultimate and chemical analysis were determined by multiple regression stepwise backward. The treatment between hardwoods-softwoods did not result in significant statistical differences for proximate, ultimate and chemical analysis. Significant statistical differences were found in carbon for National (hardwoods-softwoods) and (National-tropical) hardwoods in volatile matter, fixed carbon, carbon and oxygen and also for chemical analysis in National (hardwoods-softwoods) for F and (National-tropical) hardwoods for Br. GCV was highly positively related to C (0.79 * * *) and negatively to O (-0.71 * * *). The final independent variables of the model were (C, O, S, Zn, Ni, Br) with R(2)=0.86; F=27.68 * * *. The hydrogen did not contribute statistically to the energy content.

  4. The influence of the calibration standard and the chemical composition of the water samples residue in the counting efficiency of proportional detectors for gross alpha and beta counting. Application on the radiologic control of the IPEN-CNEN/SP; A influencia do padrao de calibracao e da composicao do residuo de amostras de agua na eficiencia de contadores proporcionais para contagem alfa e beta total. Aplicacao no controle radiologico do IPEN-CNEN/SP

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Cecilia Martins

    2003-07-01

    In this work the efficiency calibration curves of thin-window and low background gas-flow proportional counters were determined for calibration standards with different energies and different absorber thicknesses. For the gross alpha counting we have used {sup 241}Am and natural uranium standards and for the gross beta counting we have used {sup 90}Sr/{sup 90}Y and {sup 137}Cs standards in residue thicknesses ranging from 0 to approximately 18 mg/cm{sup 2}. These sample thicknesses were increased with a previously determined salted solution prepared simulating the chemical composition of the underground water of IPEN The counting efficiency for alpha emitters ranged from 0,273 +- 0,038 for a weightless residue to only 0,015 +- 0,002 in a planchet containing 15 mg/cm{sup 2} of residue for {sup 241}Am standard. For natural uranium standard the efficiency ranged from 0,322 +- 0,030 for a weightless residue to 0,023 +- 0,003 in a planchet containing 14,5 mg/cm{sup 2} of residue. The counting efficiency for beta emitters ranged from 0,430 +- 0,036 for a weightless residue to 0,247 +- 0,020 in a planchet containing 17 mg/cm{sup 2} of residue for {sup 137}Cs standard. For {sup 90}Sr/{sup 90}Y standard the efficiency ranged from 0,489 +- 0,041 for a weightless residue to 0,323 +- 0,026 in a planchet containing 18 mg/cm{sup 2} of residue. Results make evident the counting efficiency variation with the alpha or beta emitters energies and the thickness of the water samples residue. So, the calibration standard, the thickness and the chemical composition of the residue must always be considered in the gross alpha and beta radioactivity determination in water samples. (author)

  5. Symmetry Nonrestoration in a Gross-Neveu Model with Random Chemical Potential

    CERN Document Server

    Hong, S I; Hong, Seok-In; Kogut, John B.

    2001-01-01

    We study the symmetry behavior of the Gross-Neveu model in three and two dimensions with random chemical potential. This is equivalent to a four-fermion model with charge conjugation symmetry as well as Z_2 chiral symmetry. At high temperature the Z_2 chiral symmetry is always restored. In three dimensions the initially broken charge conjugation symmetry is not restored at high temperature, irrespective of the value of the disorder strength. In two dimensions and at zero temperature the charge conjugation symmetry undergoes a quantum phase transition from a symmetric state (for weak disorder) to a broken state (for strong disorder) as the disorder strength is varied. For any given value of disorder strength, the high-temperature behavior of the charge conjugation symmetry is the same as its zero-temperature behavior. Therefore, in two dimensions and for strong disorder strength the charge conjugation symmetry is not restored at high temperature.

  6. Method of forming a chemical composition

    Science.gov (United States)

    Bingham, Dennis N.; Wilding, Bruce M.; Klingler, Kerry M.; Zollinger, William T.; Wendt, Kraig M.

    2007-10-09

    A method of forming a chemical composition such as a chemical hydride is described and which includes the steps of selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of hydrogen; and exposing the selected composition to an amount of ionizing radiation to encourage the changing of the chemical bonds of the selected composition, and chemically reacting the selected composition with the source of hydrogen to facilitate the formation of a chemical hydride.

  7. Amiata donkeys: fat globule characteristics, milk gross composition and fatty acids

    Directory of Open Access Journals (Sweden)

    Mina Martini

    2014-02-01

    Full Text Available Amiata donkeys are a native breed reared in central Italy. Safeguarding native donkey breeds represents an opportunity for the development of marginal areas, especially given that donkey milk is now appearing on the market due to its potential benefits for human health. To date, only a few studies have focused on the characteristics of the milk fat globules (MFGs in the donkey species. The aim of this study was to assess the morphometric characteristics of the fat globules, gross composition and fatty acid classes in milk from Amiata donkeys reared according to the typical farming and feeding systems of the area of origin. Individual milk samples, collected from 28 Amiata donkeys between 90 and 150 days of lactation, showed the following average composition (g/100 mL: 9.47 dry matter, 1.63 protein, 0.78 casein, 0.53 fat, 7.12 lactose, and 0.36 ash. The unsaturated:saturated fatty acids ratio in milk was close to 1. The percentage of short chains was 12.29, and the percentage of long chain fatty acids was 47.64. The donkey MFGs showed an average diameter of 1.92 μm, and a number of 2.18*109/mL. Regarding MFG distribution, 70% of the globules donkey of milk are smaller than 2 μm. In conclusion, the gross composition and fatty acids of Amiata donkey milk showed similarities with milk from other Italian donkey breeds, with the exception of the monounsaturated fatty acid values which were slightly higher. Donkey MFGs had a smaller diameter and were fewer than in the ruminant species.

  8. The Chemical Composition of Honey

    Science.gov (United States)

    Ball, David W.

    2007-01-01

    Honey is a supersaturated sugar solution, created by bees, and used by human beings as a sweetener. However, honey is more than just a supersaturated sugar solution; it also contains acids, minerals, vitamins, and amino acids in varying quantities. In this article, we will briefly explore the chemical composition of honey. (Contains 2 figures and…

  9. Chemical recycling of scrap composites

    Science.gov (United States)

    Allred, Ronald E.; Salas, Richard M.

    1994-01-01

    There are no well-developed technologies for recycling composite materials other than grinding to produce fillers. New approaches are needed to reclaim these valuable resources. Chemical or tertiary recycling, conversion of polymers into low molecular weight hydrocarbons for reuse as chemicals or fuels, is emerging as the most practical means for obtaining value from waste plastics and composites. Adherent Technologies is exploring a low-temperature catalytic process for recycling plastics and composites. Laboratory results show that all types of plastics, thermosets as well as thermoplastics, can be converted in high yields to valuable hydrocarbon products. This novel catalytic process runs at 200 C, conversion times are rapid, the process is closed and, thus, nonpolluting, and no highly toxic gas or liquid products have been observed so no negative environmental impact will result from its implementation. Tests on reclamation of composite materials show that epoxy, imide, and engineering thermoplastic matrices can be converted to low molecular weight hydrocarbons leaving behind the reinforcing fibers for reuse as composite reinforcements in secondary, lower-performance applications. Chemical recycling is also a means to dispose of sensitive or classified organic materials without incineration and provides a means to eliminate or reduce mixed hazardous wastes containing organic materials.

  10. Chemical composition of interstellar dust

    Science.gov (United States)

    Das, Ankan; Chakrabarti, Sandip Kumar; Majumdar, Liton; Sahu, Dipen

    physical parameters of interstellar medium (ISM). To mimic exact interstellar condition, gas grain interactions via accretion from gas phase and desorption (thermal evaporation, photo-evaporation and non-thermal evaporation) from grain surface are considered. We find that chemical composition of interstellar grain mantle is highly dependent on physical parameters associated with a molecular cloud. Interstellar photons are seen to play an important role towards growth and structure of interstellar grain mantle. We consider effects of interstellar photons (photo-dissociation and photo-evaporation) in our simulation under various interstellar circumstances.

  11. Gross composition, fatty acid profile and sensory characteristics of Saanen goat milk fed with Cacti varieties.

    Science.gov (United States)

    Catunda, Karen Luanna Marinho; de Aguiar, Emerson Moreira; de Góes Neto, Pedro Etelvino; da Silva, José Geraldo Medeiros; Moreira, José Aparecido; do Nascimento Rangel, Adriano Henrique; de Lima Júnior, Dorgival Morais

    2016-08-01

    The use of cactus is an alternative for sustainable production systems in Northeast Brazil. The objective of this research was to evaluate the influence of supplying five cacti species from the Brazilian semi-arid northeast region on the physical-chemical sensory characteristics and the profile of fatty acids of Saanen goat milk. Five multiparous goats were used, confined, and distributed in a Latin square 5 × 5 design, with five experimental diets and five periods. Treatments consisted of 473 to 501 g/kg of a cactaceous mix (Pilosocereus gounellei, Cereus jamacaru, Cereus squamosus, Nopalea cochenillifera, or Opuntia stricta) added to 187.8 to 197.9 g/kg of "Sabiá" (Mimosa caesalpiniifolia) hay and 311 to 329 g/kg of concentrate. No effects of experimental diets (P > 0.05) were evidenced in the physical and chemical composition of milk for fat, total solids, or salt levels. However, protein, lactose, solids-not-fat levels, and cryoscopy point were influenced by diet (P  0.05) in the profile of fatty acids between treatments for all acids found, except for butyric acid. Diets also did not (P > 0.05) confer sensory changes in milk characteristics. The use of the native cacti in the dairy goats' diet did not influence the sensory characteristics or lipid profile of milk.

  12. Graphene composites containing chemically bonded metal oxides

    Indian Academy of Sciences (India)

    K Pramoda; S Suresh; H S S Ramakrishna Matte; A Govindaraj

    2013-08-01

    Composites of graphene involving chemically bonded nano films of metal oxides have been prepared by reacting graphene containing surface oxygen functionalities with metal halide vapours followed by exposure to water vapour. The composites have been characterized by electron microscopy, atomic force microscopy and other techniques. Magnetite particles chemically bonded to graphene dispersible in various solvents have been prepared and they exhibit fairly high magnetization.

  13. Chemical composition and mutagenic assessment of petrochemical ...

    African Journals Online (AJOL)

    Aghomotsegin

    their chemical composition and genotoxic effects on cell reproduction. Two petrochemicals, air liquid ... some potentially mutagenic heavy metals. The effects of the ... shows good correlation with mammalian test systems. (Fiskesjö, 1985a).

  14. Chemical composition of Earth-like planets

    CERN Document Server

    Ronco, M P; Marboeuf, U; Alibert, Y; de Elía, G C; Guilera, O M

    2015-01-01

    Models of planet formation are mainly focused on the accretion and dynamical processes of the planets, neglecting their chemical composition. In this work, we calculate the condensation sequence of the different chemical elements for a low-mass protoplanetary disk around a solar-type star. We incorporate this sequence of chemical elements (refractory and volatile elements) in our semi-analytical model of planet formation which calculates the formation of a planetary system during its gaseous phase. The results of the semi-analytical model (final distributions of embryos and planetesimals) are used as initial conditions to develope N-body simulations that compute the post-oligarchic formation of terrestrial-type planets. The results of our simulations show that the chemical composition of the planets that remain in the habitable zone has similar characteristics to the chemical composition of the Earth. However, exist differences that can be associated to the dynamical environment in which they were formed.

  15. Chemical composition of Achatina fulica

    Directory of Open Access Journals (Sweden)

    Aboua, F.

    1990-01-01

    Full Text Available Proximate composition and mineral content were determined in snail without and with shell and shell atone from Achatina fulica. This snail has high protein (above 40 %, low fat (less than 3 % and is a relatively good source of macrominerals, including calcium, phosphorus, magnesium, potassium and sodium. Achatina fulica is an excellent source of iron but is poor in copper, zinc and manganese. The snail is very rich in calcium but very poor in phosphorus, potassium and magnesium.

  16. Fourier-transformed infrared spectroscopy: a tool to identify gross chemical changes from healthy to yellow band disease tissues.

    Science.gov (United States)

    Guerra, Mayamarú; López, Maria Antonieta; Estéves, Ivan; Zubillaga, Ainhoa L; Cróquer, Aldo

    2014-01-16

    Yellow band disease (YBD) is a common and wide-spread Caribbean syndrome that affects the genus Orbicella, a group of species that constitute the framework of Caribbean coral reefs. Previous studies have shown that the structure and function of bacterial assemblages vary between healthy tissues and YBD lesions; however, how the molecular composition of tissues varies as tissues transition from healthy to YBD has not been determined before. The present study provides the first survey of macromolecules found from healthy (H), apparently healthy (AH), transition (TR) and YBD tissues of Orbicella faveolata. For this, we used Fourier-transformed mid-infrared spectroscopy (FTIR) to compare absorption profiles as a proxy for the gross molecular composition of decalcified H, AH and YBD tissues. We found a significantly higher level of infrared absorption for bands assigned to lipids in H tissues compared to YBD tissues, suggesting that lipid compounds are more abundant in compromised tissues in relation to other macromolecules. We also found a lower level of intensity of bands assigned to carbohydrates and proteins in YBD tissues, compared to H and AH tissues. A similar pattern was observed for phospholipidic compounds in relation to fatty acids. This study is the first to show that healthy and YBD-compromised tissues have different infrared absorption profiles, suggesting that alterations in the biochemical composition occur during pathogenesis. Future studies should focus on determining the actual concentration of these compounds in H, AH, TR and YBD tissues and on testing the role of translocation of photoassimilates from H tissues and/or from endolithic algae to YBD tissues.

  17. Binary stars: Mass transfer and chemical composition

    Science.gov (United States)

    Lambert, D. L.

    1982-01-01

    It is noted that mass exchange (and mass loss) within a binary system should produce observable changes in the surface chemical composition of both the mass losing and mass gaining stars as a stellar interior exposed to nucleosyntheses is uncovered. Three topics relating mass exchange and/or mass loss to nucleosynthesis are sketched: the chemical composition of Algol systems; the accretion disk of a cataclysmic variable fed by mass from a dwarf secondary star; and the hypothesis that classical Ba II giants result from mass transfer from a more evolved companion now present as a white dwarf.

  18. Chemical composition of selected Saudi medicinal plants

    Directory of Open Access Journals (Sweden)

    Ihsanullah Daur

    2015-05-01

    Full Text Available Medicinal plants are important in traditional medicine and modern pharmaceutical drugs; therefore, the interest in the analysis of their chemical composition is increasing. In this study, selected medicinal plants including Achillea fragrantissima (Forssk Sch., Amaranthus viridis L., Asteriscus graveolens (Forssk. Less., Chenopodium album L., and Conyza bonariensis (L. Cronquist were collected from the rangeland of western regions (Bahra and Hada areas of Saudi Arabia to study their chemical composition. Eight minerals (Mg, Ca, Cr, Mn, Fe, Co, Cu, and Zn, total phenolic contents, antioxidant activity, and free-radical scavenging ability were examined in order to evaluate the medicinal potential of these plants. All the plants were found to be rich sources of minerals and antioxidants, although there were significant differences (p < 0.05 in their chemical composition, which may provide a rationale for generating custom extracts from specific plants depending on the application. The findings of this study will thus facilitate herbalists in their efforts to incorporate these plants into various formulations based on their chemical composition.

  19. Chemical composition, true metabolisable energy content and ...

    African Journals Online (AJOL)

    aneldavh

    narrow leaf lupins (Lupinus angustifolius; n = 8), faba beans (Vicia faba; ... characteristics (thousand seed and hectolitre mass), chemical composition ... therefore, that the nutritional potential of alternative plant protein feeds, such as ... (L. luteus, L. albus and L. angustifolius), faba beans and narbon beans for ..... Food Agric.

  20. [Investigation of chemical composition of propolis extract].

    Science.gov (United States)

    Majiene, Daiva; Trumbeckaite, Sonata; Grūnoviene, Danguole; Ivanauskas, Liudas; Gendrolis, Antanas

    2004-01-01

    Propolis is a natural product, produced by bees and containing exudates from plants, mixed with bee wax. Propolis and its ethanolic extract are usually used for treatment and prevention of different diseases. Propolis has antibacterial, antiviral, antifungal, anti-inflammatory, anesthetic and immunomodulating properties. Till now there is no data about chemical composition of Lithuanian propolis. Thus, the aim of our work was to investigate the chemical composition of Lithuanian propolis and its ethanolic extract by using gas chromatography / mass spectrometry. We found, that the main structural types of compounds were terpenoids, aromatic and aliphatic acid esters. The most of terpenoids were mono- and sesquiterpens: azulene, alpha-bisabolol, citral, valerenol, etc. Thus, our data show, that the composition of propolis is various and depends on the origin of plants, from where propolis was collected.

  1. Multipoint NIR spectroscopy for gross composition analysis of powdered infant formula under various motion conditions.

    Science.gov (United States)

    Cama-Moncunill, Raquel; Markiewicz-Keszycka, Maria; Dixit, Yash; Cama-Moncunill, Xavier; Casado-Gavalda, Maria P; Cullen, Patrick J; Sullivan, Carl

    2016-07-01

    Powdered infant formula (PIF) is a worldwide, industrially produced, human milk substitute. Manufacture of PIF faces strict quality controls in order to ensure that the product meets all compositional requirements. Near-infrared (NIR) spectroscopy is a rapid, non-destructive and well-qualified technique for food quality assessments. The use of fibre-optic NIR sensors allows measuring in-line and at real-time, and can record spectra from different stages of the process. The non-contact character of fibre-optic sensors can be enhanced by fitting collimators, which allow operation at various distances. The system, based on a Fabry-Perot interferometer, records four spectra concurrently, rather than consecutively as in the "quasi-simultaneous" multipoint NIR systems. In the present study, a novel multipoint NIR spectroscopy system equipped with four fibre-optic probes with collimators was assessed to determine carbohydrate and protein contents of PIF samples under static and motion conditions (0.02, 0.15 and 0.30m/s) to simulate possible industrial scenarios. Best results were obtained under static conditions providing a R(2) of calibration of 0.95 and RMSEP values of 1.89%. Yet, considerably low values of RMSEP, for instance 2.70% at 0.15m/s, were provided with the in-motion predictions, demonstrating the system's potential for in/on-line applications at various levels of speed. The current work also evaluated the viability of using general off-line calibrations developed under static conditions for on/in-line applications subject to motion. To this end, calibrations in both modes were developed and compared. Best results were obtained with specific calibrations; however, reasonably accurate models were obtained with the general calibration. Furthermore, this work illustrated independency of the collimator-probe setup by characterizing PIF samples simultaneously recorded according to their carbohydrate content, even when measured under different conditions. Therefore

  2. Impact of oil on groundwater chemical composition

    Science.gov (United States)

    Brakorenko, N. N.

    2015-11-01

    The objective of the paper is to characterize the chemical composition of groundwater samples from the monitoring wells drilled in the petrol station areas within the vicinity of Tomsk. The level of contamination has increased since many macro - and microcomponent concentrations (such as petroleum products, chlorine, sulphates, carbon dioxide and lead, etc.) in groundwater samples of the present study is higher than that in previous period samples.

  3. Chemical composition of Pechora Sea crude oil

    Directory of Open Access Journals (Sweden)

    Derkach S. R.

    2017-03-01

    Full Text Available The physicochemical properties of the Pechora Sea shelf oil and its chemical composition have been studied using the methods of refractometry, titrimetry, viscometry, rheometry and standard methods for the analysis of oil and petroleum products. The fractionation of oil is held at atmospheric pressure, some fractions boiling at the temperature below and above 211 °C have been received. Chemical structural-group composition of oil and its components has been investigated using a Fourier infrared (IR spectroscopy method. The density of oil has been obtained, it is equal to 24.2 API. The chemical composition analysis shows that water content in the investigated oil sample is about 0.03 % (by weight. The oil sample contains hydrocarbons (including alkanes, naphthenes, arenes and asphaltenes with resins; their content is equal to 89 and 10 % (by weight respectively. Alkane content is about 66 %, including alkanes of normal structure – about 37 %. The solidification temperature of oil sample is equal to –43 °C. This low temperature testifies obliquely low content of solid alkanes (paraffin. Bearing in mind the content of asphaltenes with resins we can refer the investigated oil sample to resinous oils. On the other hand spectral coefficient values (aromaticity quotient and aliphaticity quotient show that oil sample belongs to naphthenic oils. According to the data of Fourier IR spectroscopy contents of naphthenes and arenes are 5.9 and 17.8 % respectively. Thus, the obtained data of chemical structural-group composition of crude oil and its fractions indicate that this oil belongs to the heavy resinous naphthenic oils. The rheological parameters obtained at the shear deformation conditions characterize the crude oil as a visco-plastic medium.

  4. The Chemical Composition of the Sun

    Science.gov (United States)

    Asplund, Martin; Grevesse, Nicolas; Sauval, A. Jacques; Scott, Pat

    2009-09-01

    The solar chemical composition is an important ingredient in our understanding of the formation, structure, and evolution of both the Sun and our Solar System. Furthermore, it is an essential reference standard against which the elemental contents of other astronomical objects are compared. In this review, we evaluate the current understanding of the solar photospheric composition. In particular, we present a redetermination of the abundances of nearly all available elements, using a realistic new three-dimensional (3D), time-dependent hydrodynamical model of the solar atmosphere. We have carefully considered the atomic input data and selection of spectral lines, and accounted for departures from local thermodynamic equilibrium (LTE) whenever possible. The end result is a comprehensive and homogeneous compilation of the solar elemental abundances. Particularly noteworthy findings are significantly lower abundances of C, N, O, and Ne compared to the widely used values of a decade ago. The new solar chemical composition is supported by a high degree of internal consistency between available abundance indicators, and by agreement with values obtained in the Solar Neighborhood and from the most pristine meteorites. There is, however, a stark conflict with standard models of the solar interior according to helioseismology, a discrepancy that has yet to find a satisfactory resolution.

  5. Chemical Composition of Different Varieties of Linseed

    Directory of Open Access Journals (Sweden)

    M. Laiq Khan*, M. Sharif, M. Sarwar, Sameea1 and M. Ameen

    2010-04-01

    Full Text Available The present study was conducted to investigate chemical composition of six varieties of linseed (Chandni, LS-29, LS-49, LS-70, LS-75 and LS-76. Proximate composition, mineral profile and cyanogenic glycosides (linamarin were determined. Average proximate composition values for linseed i.e. crude protein, ether extract, crude fiber, ash and nitrogen free extract were 24.18, 37.77, 4.78, 3.50 and 25.86%, respectively. Higher values of crude protein, ether extract, crude fiber and nitrogen free extract were observed in varieties LS-49, LS-70, LS-29 and Chandni, respectively. Average mineral contents in linseed i.e. Ca, Mg, K, Na, Cl, P, Cu, Fe, Mn and Zn were 0.39, 0.09, 1.41, 0.05, 0.08, 0.89, 4.67, 50.56, 8.29 and 13.55 ppm, respectively. Among micro minerals, varieties LS-29 and LS-70 were higher in Cu contents; LS-75 was higher in Fe content, while LS-49 was higher in Mn and Zn contents. Among macro minerals, level of Ca was higher in LS-70, levels of Mg, K and Na were higher in Chandni, while P was higher in LS-49. Average amount of linamarin in linseed was 31.05mg/100 gm DM. The variety LS-75 had the highest (35.22 mg/100 gm linamarin content, while variety LS-70 had least (26.22 mg/100 gm amount of linamarin. In conclusion, there is significant difference in chemical composition among linseed varieties. The varieties LS-49 showed higher crude protein content, LS-70 showed greater oil content, while LS-75 had higher content of linamarin.

  6. Chiral Symmetry Restoration and Realisation of the Goldstone Mechanism in the U(1) Gross-Neveu Model at Non-Zero Chemical Potential

    CERN Document Server

    Barbour, Ian M; Kogut, J B; Lombardo, M P; Morrison, S; Barbour, Ian; Hands, Simon; Kogut, John B.; Lombardo, Maria-Paola; Morrison, Susan

    1999-01-01

    We simulate the Gross-Neveu model in 2+1 dimensions at nonzero baryon density (chemical potential mu =/= 0). It is possible to formulate this model with a real action and therefore to perform standard hybrid Monte Carlo simulations with mu =/= 0 in the functional measure. We compare the physical observables from these simulations with simulations using the Glasgow method where the value of mu in the functional measure is fixed at a value mu_upd. We find that the observables are sensitive to the choice of mu_upd. We consider the implications of our findings for Glasgow method QCD simulations at mu =/= 0. We demonstrate that the realisation of the Goldstone mechanism in the Gross-Neveu model is fundamentally different from that in QCD. We find that this difference explains why there is an unphysical transition in QCD simulations at mu =/= 0 associated with the pion mass scale whereas the transition in the Gross-Neveu model occurs at a larger mass scale and is therefore consistent with theoretical predictions. W...

  7. Cometary Coma Chemical Composition (C4) Mission

    Science.gov (United States)

    Carle, Glenn C.; Clark, Benton C.; Knocke, Philip C.; OHara, Bonnie J.; Adams, Larry; Niemann, Hasso B.; Alexander, Merle; Veverka, Joseph; Goldstein, Raymond; Huebner, Walter; Morrison, David (Technical Monitor)

    1994-01-01

    Cometary exploration remains of great importance to virtually all of space science. Because comets are presumed to be remnants of the early solar nebula, they are expected to provide fundamental knowledge as to the origin and development of the solar system as well as to be key to understanding of the source of volatiles and even life itself in the inner solar system. Clearly the time for a detailed study of the composition of these apparent messages from the past has come. A comet rendezvous mission, the Cometary Coma Chemical Composition (C4) Mission, is now being studied as a candidate for the new Discovery program. This mission is a highly-focussed and usefully-limited subset of the Cometary Rendezvous Asteroid Flyby (CRAF) Mission. The C4 mission will concentrate on measurements that will produce an understanding of the composition and physical makeup of a cometary nucleus. The core science goals of the C4 mission are 1) to determine the chemical, elemental, and isotopic composition of a cometary nucleus and 2) to characterize the chemical and isotopic nature of its atmosphere. A related goal is to obtain temporal information about the development of the cometary coma as a function of time and orbital position. The four short-period comets -- Tempel 1, Tempel 2, Churyumov-Gerasimenko, and Wirtanen -which all appear to have acceptable dust production rates, were identified as candidate targets. Mission opportunities have been identified beginning as early as 1998. Tempel I with a launch in 1999, however, remains the baseline comet for studies of and planning the C4 mission. The C4 mission incorporates two science instruments and two engineering instruments in the payload to obtain the desired measurements. The science instruments include an advanced version of the Cometary Ice and Dust Experiment (CIDEX), a mini-CIDEX with a sample collection system, an X-ray Fluorescence Spectrometer and a Pyrolysis-Gas Chromatograph, and a simplified version of the Neutral

  8. Chemical Composition and Antibacterial Effects of

    Directory of Open Access Journals (Sweden)

    SS Saei Dehkordi

    2009-10-01

    Full Text Available Introduction & Objective: Rosmarinus officinalis L. as a member of the Lamiaceae family and lysozyme as a natural antibacterial agent is important in food microbiology, because of its characteristics. The aim of the present study was to determine the chemical composition and anti-listerial activity of Rosmarinus officinalis essential oil (REO alone and in combination with lysozyme for enhancement of anti-listerial activity of both substances. Materials & Methods: Rosmarinus officinalis L. was purchased from a local grocery store at Shahrekord and was identified by the Institute of Medicinal Plants, ACECR. The air-dried aerial parts were subjected to hydrodistillation using a Clevenger apparatus to obtain essential oil and yielded oil was analyzed by GC/MS. Antibacterial activity (on basis of Minimum Inhibitory Concentration (MIC of REO was studied separately and in combination with unheated lysozyme (L and heat-treated lysozyme (HTL on Listeria monocytogenes at different pH (5, 6 and 7 by a micro-broth dilution assay. The collected data were analyzed by SPSS software. Results: In the current study, 98.05% of constituents of the essential oil were identified. The major components were α-pinene (14.06%, 1,8-cineole (13.62%, verbenone (11.2%, camphor (10.51%, borneol (7.3%, 3-octanone (7.02%, camphene (5.46% and linalool (5.07%. The inhibitory action of REO was stronger at lower pH especially 5 (MIC=225 μg/mL. Inhibition by L at pH 5 was 640 μg/mL but no inhibition was seen at pH 7. HTL resulted in more effective inhibition than L, especially at pH 5 and heat-treatment 80˚C (MIC: 160 μg/mL. Conclusion: Combination of L + REO and particularly HTL + REO was led to enhancement of bacterial inhibition. It was concluded that REO by the identified chemical composition was effective alone or in combination with L or HTL on Listeria monocytogenes as a food-borne pathogen.

  9. On-line chemical composition analyzer development

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, M.J.; Garrison, A.A.; Muly, E.C.; Moore, C.F.

    1992-02-01

    The energy consumed in distillation processes in the United States represents nearly three percent of the total national energy consumption. If effective control of distillation columns can be accomplished, it has been estimated that it would result in a reduction in the national energy consumption of 0.3%. Real-time control based on mixture composition could achieve these savings. However, the major distillation processes represent diverse applications and at present there does not exist a proven on-line chemical composition sensor technology which can be used to control these diverse processes in real-time. This report presents a summary of the findings of the second phase of a three phase effort undertaken to develop an on-line real-time measurement and control system utilizing Raman spectroscopy. A prototype instrument system has been constructed utilizing a Perkin Elmer 1700 Spectrometer, a diode pumped YAG laser, two three axis positioning systems, a process sample cell land a personal computer. This system has been successfully tested using industrially supplied process samples to establish its performance. Also, continued application development was undertaken during this Phase of the program using both the spontaneous Raman and Surface-enhanced Raman modes of operation. The study was performed for the US Department of Energy, Office of Industrial Technologies, whose mission is to conduct cost-shared R D for new high-risk, high-payoff industrial energy conservation technologies. Although this document contains references to individual manufacturers and their products, the opinions expressed on the products reported do not necessarily reflect the position of the Department of Energy.

  10. Chemical compositions of four barium stars

    CERN Document Server

    Liang, Y C; Chen, Y Q; Qiu, H M; Zhang, B

    2003-01-01

    Chemical compositions of four barium stars HD 26886, HD 27271, HD 50082 and HD 98839 are studied based on high resolution, high signal-to-noise Echelle spectra. Results show that all of them are disk stars. Their \\alpha and iron peak elements are similar to the solar abundances. The neutron-capture process elements are overabundant relative to the Solar. The heavy-element abundances of the strong Ba star HD 50082 are higher than those of other three mild Ba stars. Its mass is 1.32Msun (+0.28,-0.22Msun), and is consistent with the average mass of strong Ba stars (1.5Msun). For mild Ba star HD 27271 and HD 26886, the derived masses are 1.90Msun (+0.25,-0.20Msun) and 2.78Msun (+0.75,-0.78M_sun), respectively, which are consistent with the average mass of mild Ba stars. We also calculate the theoretical abundances of Ba stars by combining the AGB stars nucleosynthesis and wind accretion formation scenario of Ba binary systems. The comparisons between the observed abundance patterns of the sample stars with the th...

  11. Chemical Composition of Ceramic Tile Glazes

    Science.gov (United States)

    Anufrik, S. S.; Kurian, N. N.; Zhukova, I. I.; Znosko, K. F.; Belkov, M. V.

    2016-11-01

    We have carried out laser emission and x-ray fluorescence spectral analysis of glaze before and after its application to ceramic tile produced by Keramin JSC (Belarus). We have studied the internal microstructure of the ceramic samples. It was established that on the surface and within the bulk interior of all the samples, there are micropores of sizes ranging from a few micrometers to tens of micrometers and microcracks as long as several hundred micrometers. The presence of micropores on the surface of the ceramic tile leads to an increase in the water absorption level and a decrease in frost resistance. It was found that a decrease in the surface tension of ceramic tile coatings is promoted by substitution of sodium by potassium, silica by boric anhydride, magnesium and barium by calcium, CaO by sodium oxide, and SiO2 by chromium oxide. We carried out a comparative analysis of the chemical composition of glaze samples using S4 Pioneer and ElvaX x-ray fluorescence spectrometers and also an LIBS laser emission analyzer.

  12. Measurement of cosmic ray chemical composition at Mt. Chacaltaya

    Energy Technology Data Exchange (ETDEWEB)

    Ogio, S.; Kakimoto, F.; Harada, D.; Tokunou, H.; Burgoa, O.; Tsunesada, Y. [Institute of Technology, Dept. of Physics, Tokuo (Japan); Shirasaki, Y. [National Space Development Agency of Japan, Tsukuba (Japan); Gotoh, E.; Nakatani, H.; Shimoda, S.; Nishi, K.; Tajima, N.; Yamada, Y. [The Institute of Physical and Chemical Research, Wako, Saitama (Japan); Kaneko, T. [Okayama University, Dept. of Physics, Oakayama (Japan); Matsubara, Y. [Nagoya University, Solar-Terrestrial Environment Laboratory, Nagoya, Aichi (Japan); Miranda, P.; Velarde, A. [Universidad Mayor de San Andres, Institute de Investigaciones Fisicas, La Paz (Bolivia); Mizumoto, T. [National Astronomical Observatory, Mitaka, Tokyo (Japan); Yoshii, H.; Morizawa, A. [Ehime University, Dept. of Physics, Matsuyama, Ehime (Japan); Murakami, K. [Nagoya University of Foreign Studies, Nissin, Aichi (Japan); Toyoda, Y. [Fukui University of Technology, Faculty of General Education, Fukui (Japan)

    2001-10-01

    BASJE group has measured the chemical composition of primary cosmic rays with energies around the knee with several methods. These measurements show that the averaged mass number of cosmic ray particles increases with energy up to the knee. In order to measure the chemical composition in much wider energy range, it was started a new experiment at Mt. Chacaltaya in 2000.

  13. Gross motor control

    Science.gov (United States)

    Gross motor control is the ability to make large, general movements (such as waving an arm or lifting a leg). ... Gross motor control is a milestone in the development of an infant. Infants develop gross motor control before they develop ...

  14. Compositional, physical and chemical modification of polylactide

    Directory of Open Access Journals (Sweden)

    M. Żenkiewicz

    2010-11-01

    Full Text Available Purpose: The purpose of this article was to review some of the modification methods applied to improve mechanical, barrier and/or surface properties of polylactide (PLA.Design/methodology/approach: The presented modification methods were classified into three groups due to the dominant role of compositional, physical or chemical factor effecting the most PLA properties.Findings: It was found that incorporation of small amounts of montmorillonite up to 5% leads to formation of a nanocomposite with enhanced tensile strength and improved barrier properties. Corona treatment of pure PLA and PLA contained MMT nanofiller causes a significant decrease in the water contact angle and does not essentially affect the diiodomethane contact angle. This treatment leads to an increase in surface free energy that is much more significant for pure PLA than for PLA containing MMT nanofiller. It was also found that with increasing number up to 1000 of laser pulses of energies 5 mJ/cm2 an increase in surface free energy was observed, while the next laser pulses caused decrease of this energy. The determination and comparison of the influence of 3 wt.% of trimethylopropane trimethacylate (TMPTA and 3 wt.% of trially isocyanurate (TAIC crosslinking agents on the thermomechanical properties of electron beam irradiated PLA was reported.Research limitations/implications: A number of various modification methods are widely reported in literature. In this article a review of only such modification methods is presented, which are in line with the newest trends in polymer industry and science.Practical implications: There are a number of PLA properties, which need to be improved to satisfy specific application conditions. For that reasons researches are leading to find suitable modification methods to improve selected properties of PLA.Originality/value: This article presents some of modification methods, which are in line with the newest trends in polymer industry and

  15. THE STUDY OF CHEMICAL COMPOSITION FOR ANIMAL FATS DURING STORAGE

    OpenAIRE

    Flavia Pop; Cornel Laslo

    2009-01-01

    In this article the chemical composition for 3 types of animal fats (pork fat, beef tallow and buffalo tallow), following the variation of saturated and unsaturated fatty acids proportion during freezing storage was studied. Determination of chemical composition of animal fats is important in establishing organoleptic and physico-chemical parameters, the variation of them in time, nature and proportion of fatty acids conferring specific characteristics to them. For pork fat was determined the...

  16. Chemical composition and metabolizable energy values of corn germ meal obtained by wet milling for layers

    Directory of Open Access Journals (Sweden)

    CS Albuquerque

    2014-03-01

    Full Text Available An experiment was carried out to determine the chemical composition, metabolizable energy values, and coefficients of nutrient digestibility of corn germ meal for layers. The chemical composition of corn germ meal was determined, and then a metabolism assay was performed to determine its apparent metabolizable energy (AME and apparent metabolizable energy corrected for nitrogen (AMEn values and its dry matter and gross energy apparent metabolizability coefficients (CAMDM and CAMGE, respectively. In the 8-day assay (four days of adaptation and four days of total excreta collection, 60 29-week-old white Lohman LSL layers were used. A completely randomized experimental design, with three treatments with five replicates of four birds each, was applied. Treatments consisted of a reference diet and two test diets, containing 20 or 30% corn germ meal. Results were submitted to analysis of variance and means were compared by the Tukey tests at 5% probability level. The chemical composition of corn germ meal was: 96.39% dry matter, 49.48% ether extract, 1.87% ashes, 7243 kcal gross energy/kg, 11.48% protein, 0.19% methionine, 0.21% cystine, 0.48% lysine, 0.40% threonine, 0.72% arginine, 0.35% isoleucine, 0.83% leucine, 0.57% valine, and 0.37% histidine, on as-fed basis. There were no statistical differences in AME, AMEn, CAMDM, and CAMGE values with the inclusion of 20 and 30% corn germ meal in the diets. On dry matter basis, AME, AMEn, CAMDM, and CAMGE values of corn germ meal were: 4,578 and 4,548 kcal/kg, 4,723 and 4,372 kcal/kg, 64.95 and 61.86%, respectively.

  17. Propolis chemical composition and honeybee resistance against Varroa destructor.

    Science.gov (United States)

    Popova, M; Reyes, M; Le Conte, Y; Bankova, V

    2014-01-01

    Propolis is known as honeybee chemical defence against infections and parasites. Its chemical composition is variable and depends on the specificity of the local flora. However, there are no data concerning the relationship between propolis chemical composition and honeybee colony health. We tried to answer this question, studying the chemical composition of propolis of bee colonies from an apiary near Avignon, which are tolerant to Varroa destructor, comparing it with colonies from the same apiary which are non-tolerant to the mites. The results indicated that non-tolerant colonies collected more resin than the tolerant ones. The percentage of four biologically active compounds - caffeic acid and pentenyl caffeates - was higher in propolis from tolerant colonies. The results of this study pave the way to understanding the effect of propolis in individual and social immunity of the honeybees. Further studies are needed to clarify the relationship between propolis chemical composition and honeybee colony health.

  18. Physio-chemical, mineral composition and antioxidant properties of ...

    African Journals Online (AJOL)

    Physio-chemical, mineral composition and antioxidant properties of Roselle ... The roselle extract has a unique red colour, good flavour, low sugar and high acidic ... human body from several diseases attributed to the reactions of free radicals.

  19. Chemical composition and antioxidant activity of essential oil ...

    African Journals Online (AJOL)

    LACPREENE

    2012-08-12

    Aug 12, 2012 ... The chemical composition of C. ladanifer essential oil was characterized by high ... Analysis of essential oils was carried out by GC–MS using a .... with literature shows important qualitative and quantita- tive differences in ...

  20. Chemical composition and antifungal activity of essential oils of ...

    African Journals Online (AJOL)

    patrick

    2015-03-25

    Mar 25, 2015 ... chemical composition of the species of Algerian citrus. (Baaliouamer, 1987). ... Osbeck), Bigaradier (Citrus aurantium), lemon (Citrus limonum) and ..... The fungi anti capacities of essential oils of the Algerian citrus proved to ...

  1. Chemical composition of upper crust in eastern China

    Institute of Scientific and Technical Information of China (English)

    鄢明才; 迟清华; 顾铁新; 王春书

    1997-01-01

    In an area of 3. 3 ×106 km" within eastern China, 28 253 rock samples were collected systematically and combined into 2 718 composite samples which were analyzed by 15 reliable methods using national preliminary certified reference materials (CRMs) for data quality monitoring. The average chemical compositions of the exposed crust, the sedimentary cover and the exposed basement as well as the upper crust for 76 chemical elements in eastern China are given.

  2. Honey: Chemical composition, stability and authenticity.

    Science.gov (United States)

    da Silva, Priscila Missio; Gauche, Cony; Gonzaga, Luciano Valdemiro; Costa, Ana Carolina Oliveira; Fett, Roseane

    2016-04-01

    The aim of this review is to describe the chemical characteristics of compounds present in honey, their stability when heated or stored for long periods of time and the parameters of identity and quality. Therefore, the chemical characteristics of these compounds were examined, such as sugars, proteins, amino acids, enzymes, organic acids, vitamins, minerals, phenolic and volatile compounds present in honey. The stability of these compounds in relation to the chemical reactions that occur by heating or prolonged storage were also discussed, with increased understanding of the behavior regarding the common processing of honey that may compromise its quality. In addition, the identity and quality standards were described, such as sugars, moisture, acidity, ash and electrical conductivity, color, 5-HMF and diastase activity, along with the minimum and maximum limits established by the Codex Alimentarius.

  3. Chemical composition of the early universe

    NARCIS (Netherlands)

    Harwit, M; Spaans, M

    2003-01-01

    A prediction of standard inflationary cosmology is that the elemental composition of the medium out of which the earliest stars and galaxies condensed consisted primarily of hydrogen and helium (4)He, with small admixtures of deuterium, lithium (7)Li, and (3)He. The most redshifted quasars,

  4. The chemical composition of the Galileian satellites

    CERN Document Server

    Celebonovic, V

    1998-01-01

    Using the semiclassical theory of dense matter proposed by P.Savic and R.Kasanin,the mean molecular masses of the Galilean satellites of Jupiter are determined.The calculated values are fitted by plausible combinations of chemical elements,and the results are in good agreement with the observations by "Galileo".Possible cosmogonical explanations are briefly discussed.

  5. Variation in chemical composition and physical characteristics of cereal grains from different genotypes

    DEFF Research Database (Denmark)

    Rodehutscord, Markus; Rückert, Christine; Maurer, Hans Peter

    2016-01-01

    to as GrainUp. Genotypes of one grain species were grown on the same site, except maize. In general, concentrations of proximate nutrients were not largely different from feed tables. The coefficient of variation (CV) for the ether extract concentration of maize was high because the data pool comprised...... speciality maize bred for its high oil content. A subset of 8 barley, 20 rye, 20 triticale and 20 wheat samples was analysed to differ significantly in several carbohydrate fractions. Gross energy concentration of cereal grains could be predicted from proximate nutrient concentration with good accuracy......Genotypes of cereal grains, including winter barley (n = 21), maize (n = 27), oats (n = 14), winter rye (n = 22), winter triticale (n = 21) and winter wheat (n = 29), were assayed for their chemical composition and physical characteristics as part of the collaborative research project referred...

  6. Reinforced polypropylene composites: effects of chemical compositions and particle size.

    Science.gov (United States)

    Ashori, Alireza; Nourbakhsh, Amir

    2010-04-01

    In this work, the effects of wood species, particle sizes and hot-water treatment on some physical and mechanical properties of wood-plastic composites were studied. Composites of thermoplastic reinforced with oak (Quercus castaneifolia) and pine (Pinus eldarica) wood were prepared. Polypropylene (PP) and maleic anhydride grafted polypropylene (MAPP) were used as the polymer matrix and coupling agent, respectively. The results showed that pine fiber had significant effect on the mechanical properties considered in this study. This effect is explained by the higher fiber length and aspect ratio of pine compared to the oak fiber. The hot-water treated (extractive-free) samples, in both wood species, improved the tensile, flexural and impact properties, but increased the water absorption for 24h. This work clearly showed that lignocellulosic materials in both forms of fiber and flour could be effectively used as reinforcing elements in PP matrix. Furthermore, extractives have marked effects on the mechanical and physical properties.

  7. NM Gross Receipts Baseline

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  8. Chemical modification of flax reinforced polypropylene composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available ) and ∆Ea is the activation energy for the relaxation. The slope of Arrhenius plot obtained by plotting log f versus 1/T will give the activation energy for that process. Table 3 presents the activation energy of the composites and it can be observed... at the temperature where the loss modulus is maximum indicating a relaxation phenomenon. The increase in loss modulus is attributed to the increase in energy absorption caused by the addition of fibres. 5.4.1.3 Mechanical damping factor (tan δ) Page 9 of 26...

  9. Cometary coma chemical composition (C4) mission. [Abstract only

    Science.gov (United States)

    Carle, G. C.; Clark, B. C.; Niemann, H. B.; Alexander, M.; Knocke, P. C.; O'Hara, B. J.

    1994-01-01

    Cometary missions are of enormous fundamental importance for many different space science disciplines, including exobiology. Comets are presumed relics of the earliest, most primitive material in the solar nebula and are related to the planetesimals. They undoubtedly provided a general enrichment of volatiles to the inner solar system (contributing to atmospheres and oceans) and may have been key to the origin of life. A Discovery class, comet rendezvous mission, the Cometary Coma Chemical Composition (C4) Mission, was selected for further study by NASA earlier this year. The C4 Mission is a highly focused and usefully-limited subset of the Cometary Rendezvous Asteroid Flyby (CRAF) Mission, concentrating exclusively on measurements which will lead to an understanding of the chemical composition and make-up of the cometary nucleus. The scientific goals of the Cometary Coma Chemical Composition (C4) Mission are to rendezvous with a short-period comet and (1) to determine the elemental, chemical, and isotopic composition of the nucleus and (2) to characterize the chemical and isotopic nature of its atmosphere. Further, it is a goal to obtain preliminary data on the development of the coma (dust and gas composition) as a function of time and orbital position.

  10. Chemical composition of Hanford Tank SY-102

    Energy Technology Data Exchange (ETDEWEB)

    Birnbaum, E.; Agnew, S.; Jarvinen, G.; Yarbro, S.

    1993-12-01

    The US Department of Energy established the Tank Waste Remediation System (TWRS) to safely manage and dispose of the radioactive waste, both current and future, stored in double-shell and single-shell tanks at the Hanford sites. One major program element in TWRS is pretreatment which was established to process the waste prior to disposal using the Hanford Waste Vitrification Plant. In support of this program, Los Alamos National Laboratory has developed a conceptual process flow sheet which will remediate the entire contents of a selected double-shelled underground waste tank, including supernatant and sludge, into forms that allow storage and final disposal in a safe, cost-effective and environmentally sound manner. The specific tank selected for remediation is 241-SY-102 located in the 200 West Area. As part of the flow sheet development effort, the composition of the tank was defined and documented. This database was built by examining the history of liquid waste transfers to the tank and by performing careful analysis of all of the analytical data that have been gathered during the tank`s lifetime. In order to more completely understand the variances in analytical results, material and charge balances were done to help define the chemistry of the various components in the tank. This methodology of defining the tank composition and the final results are documented in this report.

  11. Gross decontamination experiment report

    Energy Technology Data Exchange (ETDEWEB)

    Mason, R.; Kinney, K.; Dettorre, J.; Gilbert, V.

    1983-07-01

    A Gross Decontamination Experiment was conducted on various levels and surfaces of the TMI - Unit 2 reactor building in March 1982. The polar crane, D-rings, missile shields, refueling canals, refueling bridges, equipment, and elevations 305' and 347'-6'' were flushed with low pressure water. Additionally, floor surfaces on elevation 305' and floor surfaces and major pieces of equipment on elevation 347'-6'' were sprayed with high pressure water. Selective surfaces were decontaminated with a mechanical scrubber and chemicals. Strippable coating was tested and evaluated on equipment and floor surfaces. The effectiveness, efficiency, and safety of several decontamination techniques were established for the large, complex decontamination effort. Various decontamination equipment was evaluated and its effectiveness was documented. Decontamination training and procedures were documented and evaluated, as were the support system and organization for the experiment.

  12. Gross National Happiness

    DEFF Research Database (Denmark)

    Giri, Krishna Prasad; Kjær-Rasmussen, Lone Krogh

    This paper investigates practices related to the ideology of infusing Gross National Happiness (GNH) into school curriculum, the effectiveness of the meditation and mind training and the implication of GNH for school environment. It also explores how GNH ambience has been managed and practiced...... of Gross National Happiness and Educating for Gross National happiness....

  13. Major element chemical compositions of chondrules in unequilibrated chondrites

    Science.gov (United States)

    Ikeda, Y.

    1984-01-01

    The chemical compositions (except for metals and sulfides in chondrules) of more than 500 chondrules from unequilibrated E, H, L, LL, and C chondrites were measured using a broad beam of an electron-probe microanalyzer. The compositions of chondrules can be represented by various mixtures of normative compositions of olivine, low-Ca pyroxene, plagioclase, and high-Ca pyroxene with minor amounts of spinel, feldspathoid, SiO2-minerals, etc., indicating that the chondrule precursor materials consisted of aggregates of these minerals. The Al, Na, and K contents of most chondrules reflect the compositions of the ternary feldspar (An-Ab-Kf) of the chondrule precursor materials, and chemical types of chondrules (KF, SP, IP, and CP) are defined on the basis of the atomic proportion of Al, Na, and K.

  14. Sensory properties and chemical composition of Sharri cheese from Kosovo

    Directory of Open Access Journals (Sweden)

    Agim Rysha

    2014-11-01

    Full Text Available Food sensory properties, analyses and chemical composition are very important because they provide information about product quality and end-user acceptance or preferences. An assessment of sensory characteristics and chemical composition of mountain sheep and cow’s-milk cheese from shepherd’s huts and industrial manufacturers in Kosovo was carried out. Consumer-oriented tests using a 9 point hedonic scale were conducted in order to determine Sharri cheese acceptability. Chemical parameters (fat content, fat content of dry matter, acidity, protein, dry matter, mineral and water content and sodium chloride content of 45-day brine cheese samples were also analyzed. Chemical and sensory assessment demonstrated large property differences. A recommendation stems from the results showing that the standardization of both artisanal and industrial production of Sharri cheese is required.

  15. Chemical composition analysis and authentication of whisky.

    Science.gov (United States)

    Wiśniewska, Paulina; Dymerski, Tomasz; Wardencki, Waldemar; Namieśnik, Jacek

    2015-08-30

    Whisky (whiskey) is one of the most popular spirit-based drinks made from malted or saccharified grains, which should mature for at least 3 years in wooden barrels. High popularity of products usually causes a potential risk of adulteration. Thus authenticity assessment is one of the key elements of food product marketing. Authentication of whisky is based on comparing the composition of this alcohol with other spirit drinks. The present review summarizes all information about the comparison of whisky and other alcoholic beverages, the identification of type of whisky or the assessment of its quality and finally the authentication of whisky. The article also presents the various techniques used for analyzing whisky, such as gas and liquid chromatography with different types of detectors (FID, AED, UV-Vis), electronic nose, atomic absorption spectroscopy and mass spectrometry. In some cases the application of chemometric methods is also described, namely PCA, DFA, LDA, ANOVA, SIMCA, PNN, k-NN and CA, as well as preparation techniques such SPME or SPE.

  16. Fuel options from microalgae with representative chemical compositions

    Energy Technology Data Exchange (ETDEWEB)

    Feinberg, D. A.

    1984-07-01

    Representative species of microalgae are examined with respect to their reported chemical compositions. Each species is analyzed under a variety of culture conditions, with the objective being to characterize an optimum mixture of fuel products (e.g., methane, ethanol, methylester) which should be produced by the particular species. Historically the emphasis has been on the entire algal cell mass. Using the reported chemical composition for the representative species under specific sets of growth conditions, some conclusions can be drawn about the preferred fuel product conversion routes that could be employed. 10 references, 7 figures, 12 tables.

  17. Probabilistic thermo-chemical analysis of a pultruded composite rod

    NARCIS (Netherlands)

    Baran, Ismet; Tutum, Cem C.; Hattel, Jesper H.

    2012-01-01

    In the present study the deterministic thermo-chemical pultrusion simulation of a composite rod taken from the literature [7] is used as a validation case. The predicted centerline temperature and cure degree profiles of the rod match well with those in the literature [7]. Following the validation c

  18. Probabilistic thermo-chemical analysis of a pultruded composite rod

    DEFF Research Database (Denmark)

    Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri

    2012-01-01

    In the present study the deterministic thermo-chemical pultrusion simulation of a composite rod taken from the literature [7] is used as a validation case. The predicted centerline temperature and cure degree profiles of the rod match well with those in the literature [7]. Following the validation...

  19. An investigation into the chemical composition of alternative invertebrate prey

    NARCIS (Netherlands)

    Oonincx, D.G.A.B.; Dierenfeld, E.S.

    2012-01-01

    The aim of this study was to determine the chemical composition of eight invertebrate species and evaluate their suitability as alternative prey. The species selected were rusty red cockroaches (Blatta lateralis), six-spotted cockroaches (Eublaberus distanti), Madagascar hissing cockroaches (Grompha

  20. Composition and Thermodynamic Properties of Air in Chemical Equilibrium

    Science.gov (United States)

    Moeckel, W E; Weston, Kenneth C

    1958-01-01

    Charts have been prepared relating the thermodynamic properties of air in chemical equilibrium for temperatures to 15,000 degrees k and for pressures 10(-5) to 10 (plus 4) atmospheres. Also included are charts showing the composition of air, the isentropic exponent, and the speed of sound. These charts are based on thermodynamic data calculated by the National Bureau of Standards.

  1. Interpreting chemical compositions of small scale basaltic systems: A review

    Science.gov (United States)

    McGee, Lucy E.; Smith, Ian E. M.

    2016-10-01

    Small scale basaltic magmatic systems occur in all of the major tectonic environments of planet Earth and are characteristically expressed at the Earth's surface as fields of small monogenetic cones. The chemical compositions of the materials that make up these cones reflect processes of magma generation and differentiation that occur in their plumbing system. The volumes of magmas involved are very small and significantly their compositional ranges reveal remarkably complex processes which are overwhelmed or homogenized in larger scale systems. Commonly, compositions are basaltic, alkalic and enriched in light rare earth elements and large ion lithophile elements, although the spectrum extends from highly enriched nephelinites to subalkalic and tholeiitic basalts. Isotopic analyses of rocks from volcanic fields almost always display compositions which can only be explained by the interaction of two or more mantle sources. Ultimately their basaltic magmas originate by small scale melting of mantle sources. Compositional variety is testament to melting processes at different depths, a range of melting proportions, a heterogeneous source and fractionation, magma mixing and assimilation within the plumbing system that brings magmas to the surface. The fact that such a variety of compositions is preserved in a single field shows that isolation of individual melting events and their ascent is an important and possibly defining feature of monogenetic volcanism, as well as the window their chemical behavior provides into the complex process of melt generation and extraction in the Earth's upper mantle.

  2. Surface chemical composition analysis of heat-treated bamboo

    Science.gov (United States)

    Meng, Fan-dan; Yu, Yang-lun; Zhang, Ya-mei; Yu, Wen-ji; Gao, Jian-min

    2016-05-01

    In this study, the effect of heat treatment on the chemical composition of bamboo slivers was studied. The chemical properties of the samples were examined by chemical analysis. Results showed a decrease in the contents of holocellulose and α-cellulose, as well as an increase in the contents of lignin and extractives. Changes in the chemical structure of bamboo components were analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). FTIR spectroscopy results indicated that hemicellulose contents decrease, whereas lignin contents increase after heat treatment. Ester formation linked to lignin decreased the hygroscopicity of the bamboo samples and consequently improved their dimensional stability and durability. XPS spectroscopy results showed that hemicelluloses and celluloses are relatively more sensitive to the heating process than lignin. As a consequence, hemicellulose and cellulose contents decreased, whereas lignin contents increased during heat treatment. The results obtained in this study provide useful information for the future utilization of heat-treated bamboo.

  3. Composition and placement process for oil field chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Cantu, L.A.; Yost, M.E.

    1991-01-22

    This patent describes a process for the continuous release of an oil field chemical within a subterranean hydrocarbon bearing formation or wellbore penetrating such formation. It comprises placing the oil field chemical in a polymeric microcapsule; dispersing such polymeric microcapsules; introducing the wellbore fluid containing the microcapsules into a well bore or subterranean formation through a wellbore; then allowing water and temperature at formation conditions to degrade; continuously releasing the chemical from the degraded microcapsules. This patent describes a composition comprising an oil field chemical incorporated in a polymeric microcapsule comprising the condensation product of hydroxyacetic acid monomer or hydroxyacetic acid co-condensed with up to 15 percent by weight of other hydroxy-, carboxylic acid-, or hydroxycarboxylic acid- containing moieties. The product has a number average molecular weight of from about 200 to about 4000.

  4. Date fruit: chemical composition, nutritional and medicinal values, products.

    Science.gov (United States)

    Tang, Zhen-Xing; Shi, Lu-E; Aleid, Salah M

    2013-08-15

    Date fruit has served as a staple food in the Arab world for centuries. Worldwide production of date fruit has increased almost threefold over the last 40 years, reaching 7.68 million tons in 2010. Date fruit can provide many essential nutrients and potential health benefits to the consumer. Date fruit goes through four ripening stages named kimri, khalal, rutab and tamer. The main chemical components of date fruit include carbohydrates, dietary fibre, enzymes, protein, fat, minerals, vitamins, phenolic acids and carotenoids. The chemical composition of date fruit varies according to ripening stage, cultivar, growing environment, postharvest conditions, etc. The nutritional and medicinal activities of date fruit are related to its chemical composition. Many studies have shown that date fruit has antioxidant, antimutagenic, anti-inflammatory, gastroprotective, hepatoprotective, nephroprotective, anticancer and immunostimulant activities. Various date fruit-based products such as date syrup, date paste, date juice and their derived products are available. Date by-products can be used as raw materials for the production of value-added products such as organic acids, exopolysaccharides, antibiotics, date-flavoured probiotic-fermented dairy produce, bakery yeasts, etc. In this paper the chemical composition and nutritional and medicinal values of date fruit as well as date fruit-based products are reviewed.

  5. Features of a chemical composition of dry leaves of Steviavebaudiana

    Directory of Open Access Journals (Sweden)

    Irina Borisovna Krasina

    2016-05-01

    Full Text Available This work is dedicated to the study of a chemical composition of dry leaves of Stevia. Dry leaves of Stevia contain diterpene glycosides that contribute to their sweet taste, which makes possible the use of Stevia as a sugar substitute in a production of flour confectionery products. The evaluation of amino acid composition of dried leaves of Stevia showed that their composition includes 7 essential amino acids, among them the limiting amino acid is valine.During experimental researches it was established that they are containing in a sufficient quantity water-soluble and fat-soluble vitamins in their composition. We have studied the effect of processing conditions on the degree of milling of dry leaves of Stevia. It was revealed that the pressure of 5 MPa in the contact zone of the working elements do not guarantee a product with a desired degree of milling. Milling of dried leaves of Stevia at a pressure equal to 10 MPa, allows achieving a high degree of size reduction with a simultaneous formation of the main physical and chemical characteristics of amilledproduct. It was established that granulometric composition of dry leaves of Stevia, obtained by milling in a rotor-roller disintegrator, presents the highest content of particles with a size from 5 to 30 μm, ensuring high consumer properties of the obtained biologically active additives (BAA.

  6. Surface chemical composition analysis of heat-treated bamboo

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Fan-dan, E-mail: fandan_meng@163.com [MOE Key Laboratory of Wooden Material Science and Application, Beijing Forestry University, 35 Qinghua East Road, Haidian District, Beijing 100083 (China); Yu, Yang-lun, E-mail: yuyanglun@caf.ac.cn [Research Institute of Wood Industry, Chinese Academy of Forestry, No 1 Dongxiaofu, Haidian District, Beijing 100091 (China); Zhang, Ya-mei, E-mail: zhangyamei@caf.ac.cn [Research Institute of Wood Industry, Chinese Academy of Forestry, No 1 Dongxiaofu, Haidian District, Beijing 100091 (China); Yu, Wen-ji, E-mail: yuwenji@caf.ac.cn [Research Institute of Wood Industry, Chinese Academy of Forestry, No 1 Dongxiaofu, Haidian District, Beijing 100091 (China); Gao, Jian-min, E-mail: gaojm@bjfu.edu.cn [MOE Key Laboratory of Wooden Material Science and Application, Beijing Forestry University, 35 Qinghua East Road, Haidian District, Beijing 100083 (China)

    2016-05-15

    Highlights: • Investigate the detailed chemical components contents change of bamboo due to heating. • Chemical analysis of bamboo main components during heating. • Identify the connection between the oxygen to carbon atomic ratio changes and chemical degradation. - Abstract: In this study, the effect of heat treatment on the chemical composition of bamboo slivers was studied. The chemical properties of the samples were examined by chemical analysis. Results showed a decrease in the contents of holocellulose and α-cellulose, as well as an increase in the contents of lignin and extractives. Changes in the chemical structure of bamboo components were analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). FTIR spectroscopy results indicated that hemicellulose contents decrease, whereas lignin contents increase after heat treatment. Ester formation linked to lignin decreased the hygroscopicity of the bamboo samples and consequently improved their dimensional stability and durability. XPS spectroscopy results showed that hemicelluloses and celluloses are relatively more sensitive to the heating process than lignin. As a consequence, hemicellulose and cellulose contents decreased, whereas lignin contents increased during heat treatment. The results obtained in this study provide useful information for the future utilization of heat-treated bamboo.

  7. Chemical composition of material fractions in Danish household waste

    DEFF Research Database (Denmark)

    Riber, Christian; Petersen, Claus; Christensen, Thomas Højlund

    2009-01-01

    The chemical composition of Danish household waste was determined by two approaches: a direct method where the chemical composition (61 substances) of 48 material fractions was determined after hand sorting of about 20 tonnes of waste collected from 2200 households; and an indirect method where...... batches of 80-1200 tonnes of unsorted household waste was incinerated and the content of the waste determined from the content of the outputs from the incinerator. The indirect method is believed to better represent the small but highly contaminated material fractions (e,g., batteries) than the direct...... method, because of the larger quantities included and the more homogenous material to sample from. Differences between the direct and the direct methods led to corrections in the of heavy metal concentration of a few fractions. The majority of the energy content of the waste originates from organic waste...

  8. Chemical Composition and Bioactive Compounds of Some Wild Edible Mushrooms

    Directory of Open Access Journals (Sweden)

    Melinda NAGY

    2017-05-01

    Full Text Available Over the last decades, the consumption of mushrooms has significantly increased due to the scientific evidence of their ability to help the organism in the combat and prevention of several diseases (Kalac, 2009. Fruiting bodies of mushrooms are consumed as a delicacy for their texture and flavour, but also for their nutritional properties that makes them even more attractable (Heleno S. 2015. In this paper data were collected from several scientific studies with the aim to characterize the chemical composition and content of bioactive compounds of various mushrooms species: Agaricus bisporus, Boletus edulis, Cantharellus cibarius, Pleurotus ostreatus, Lactarius piperatus. The chemical composition of 5 wild edible studied mushrooms, including moisture, ash, total carbohydrates, total sugars, crude fat, crude protein and energy were determined according to AOAC procedures.

  9. Parboiled rice: chemical composition and the occurrence of mycotoxins

    Directory of Open Access Journals (Sweden)

    Giniani Carla Dors

    2011-03-01

    Full Text Available The objective of this work was to evaluate the incidence of aflatoxin B1 (AFB B1, deoxynivalenol (DON, ochratoxin A (OTA, and zearalenone (ZEA in parboiled rice with respect to its chemical composition. Eight lots from five different brands of parboiled rice were collected in four samplings, at different seasons, until the amount of 32 lots. It was observed that: DON was present in 22% of the samples (from 180 to 400 ppb; ZEA in 19% (from 317 to 396 ppb; OTA in 12.5% (from 13 and 26 ppb; and AFB B1 in 9% (from 11 to 74 ppb. The results of the chemical composition were not different from those previously mentioned in the literature concerning parboiled rice. The ash and phenol levels in the contaminated parboiled rice samples suggested that those compounds had a relation to the occurrence of OTA, DON and ZEA mycotoxins.

  10. Chemical Composition of Essential Oil from Marrubium Vulgare L. Leaves

    OpenAIRE

    Bayir, Burcu; Gündüz, Hatice; Usta, Tuba; Şahin, Esma; Özdemir, Zeynep; Kayır, Ömer; Sen, Özkan; Akşit, Hüseyin; Elmastaş, Mahfuz; Erenler, Ramazan

    2014-01-01

    – The essential oils are significant for pharmaceutical, food and cosmetic industries. Marrubium vulgare L. has been used as a traditional medicine to treat the various illnesses. The chemical composition of the essential oil from leaves of Marrubium vulgare L.was obtained by steam distillation using the Clevenger apparatus. The oil was analyzed by gas chromatography and mass spectrometry (GC-MS). The main constituent of the oil was α-pinene (28.85%)

  11. Seasonal variation in the chemical composition of two tropical seaweeds.

    Science.gov (United States)

    Marinho-Soriano, E; Fonseca, P C; Carneiro, M A A; Moreira, W S C

    2006-12-01

    The chemical composition of red seaweed Gracilaria cervicornis and brown seaweed Sargassum vulgare from Brazil was investigated. In this study, the relationship between the nutritive components of each species and the environment was established. Protein content varied from 23.05+/-3.04% to 15.97+/-3.04%. The highest value was found in G. cervicornis. The protein levels were positively correlated with nitrogen content and negatively with water temperature and salinity. Carbohydrate contents of both species varied significantly (prelated to environment.

  12. Chemical composition and biological activity of the plum seed extract

    OpenAIRE

    Savić, Ivan M.; Nikolić, Vesna D.; Savić-Gajić, Ivana M.; Kundaković, Tatjana D.; Stanojković, Tatjana P.; Najman, Stevo J.; id_orcid 0000-0002-2411-9802

    2016-01-01

    The aim of this paper was to estimate the biological activity of the plum seed extract and to define the chemical composition by using the ESI-MS method. During the investigation of the antioxidant activity, the extract showed a better ability to inhibit DPPH radicals compared with amygdalin standard. The results of the antimicrobial study indicate that the extract has a greater effect on Gram-negative bacteria compared with amygdalin. Gram-positive bacteria and fungi remained resistant in bo...

  13. The chemical composition at a galactocentric distance of 13 KPC

    Science.gov (United States)

    Rolleston, W. R. J.; Dufton, P. L.; Fitzsimmons, A.

    1994-04-01

    High-resolution observations of two very sharp-lined, main-sequence B-type stars, associated with the H II region S 285, have been obtained using the ISIS spectrograph on the William Herschel Telescope. The spectroscopic data have been analysed using local thermodynamic equilibrium (LTE) model-atmosphere techniques to derive the stellar atmospheric parameters, chemical compositions and a mean distance of 4.3 kpc. As the lifetimes for these stars were calculated to be less than 6 Myrs, their photospheric abundances should reflect that of their natal interstellar material. Individual element abundances deduced for both stars were generally in excellent agreement (differing on average by less than 0.1 dex), although there is some evidence to suggest that the stars formed from material which had different nitrogen abundances. Both stars appear to have chemical compositions similar to that found in the solar neighborhood, which is consistent with a zero abundance gradient over these galactocentric distances. The chemical compositions of the stars associated with S 285 have also been compared with three other clusters at similar galactocentric distances (Bochum 1, NGC 1893 and Dolidze 25). From a differential analysis, Dolidze 25 appears to have a mean metal deficiency of approximately 0.7 dex, with oxygen being less underabundant, while the other two clusters have similar abundances to S 285. We conclude that these results are inconsistent with the concept of a linear galactic abundance gradient, that the chemical composition is not unique and that there are significant abundance variations over distance scales of 1 kpc at these large galactocentric distances.

  14. Chemical composition of silica-based biocidal modifier

    Directory of Open Access Journals (Sweden)

    Grishina Anna Nikolaevna

    2016-11-01

    Full Text Available Increase of the amount of fungi spores and micotixines causes the increase in the number of different diseases. Because of this, ensuring the biological safety in buildings is becoming more and more important today. The preferred way to guarantee the biological safety of a building is to employ modern building materials that prevent the settlement of the fungi colonies on the inner surfaces of walls. Such building materials can be produced using novel biocidal modifiers that allow controlling the number of microorganisms on the surface and in the bulk of a composite construction. The precipitation product of zinc hydrosilicates and sodium sulfate is one of the mentioned modifiers. Till now, the exact chemical composition of such precipitation product is controversial; it is obvious, though, that the efficacy of the biocidal modifier is mostly determined by the type of the copper compounds. In the present work an integrated approach is used for the investigation of the chemical composition of the biocidal modifier. Such an approach consists in the examination of the modifier’s composition by means of different, yet complementary, research methods: X-ray diffraction, infrared spectroscopy and DTA. It is shown that the chemical composition of the modifier mainly depends on the amount of precipitant. X-ray diffraction reveals that the major part of the modifier is represented by amorphous phase. Along with the increase of the precipitant’s amount the crystalline phase Zn4SO4(OH6•xH2O formation takes place. Such a crystalline phase is not appropriate as a component of the biocidal modifier. Another two methods - DTA and IR spectroscopy - reveal that the amorphous phase consists essentially of zinc hydrosilicates.

  15. Chemical composition and surface charge properties of montmorillonite

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-wen; HU Min; HU Yue-hua

    2008-01-01

    The effects of the cell parameter and chemical composition on the surface charge properties of five kinds of different colour montmorillonites were studied. The results indicate that the surface isoelectric point(IEP) of the montmorillonite shows positive correlation with the mass fractions of Fe2O3 and K20, but it has little relation to the mass fractions of other chemical compositions. At around pH=6.8, the surface zeta potential of the montmorillonite shows the negative relationship with the mass fractions of Fe2O3 and MgO, but it does not linearly correlate to the mass fractions of other chemical compositions. Cell parameter(b0) of the montmofillonite expresses negative linear relationship with mass fractions of K2O and Na2O, so does c0sinβ with mass fractions of SiO2 and Fe2O3. And there is no specific relationship between bo and IEP of different montmori Uonites, but there is positive correlation between c0sinβ and IEP of different montmorillonite samples.

  16. Interfacial studies of chemical-vapor-infiltrated ceramic matrix composites

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, J.J. (United Technologies Research Center, East Hartford, CT (USA))

    1990-06-15

    The objective of this program was to investigate the fiber-matrix interfacial chemistry in chemical-vapor-infiltrated SiC matrix composites utilizing NICALON SiC and Nextel 400 mullite fibers and how this interface influences composite properties such as strength, toughness and environmental stability. The SiC matrix was deposited using three different reactants: methyldichlorosilane, methyltrichlorosilane and dimethyldichlorosilane. It was found that by varying the reactant gas flow rates, the ratio of carrier gas to reactant gas, the type of carrier gas (hydrogen or argon), the flushing gas used in the reactor prior to deposition (hydrogen or argon) or the type of silane reactant gas used, the composition of the deposited SiC could be varied from very silicon rich (75 at.%) to carbon rich (60%) to almost pure carbon. Stoichiometric SiC was found to bond very strongly to both NICALON and Nextel fibers, resulting in a weak and brittle composite. A thin carbon interfacial layer deposited either deliberately by the decomposition of methane or inadvertently by the introduction of argon into the reactor prior to silane flow resulted in a weakly bonded fiber-matrix interface and strong and tough composites. However, composites with this type of interface were not oxidatively stable. Preliminary results point ot the use of a carbon-rich SiC (mixture of carbon plus SiC) interfacial zone to achieve a relatively weak, crack-deflecting fiber-matrix bond but also exhibiting oxidative stability. (orig.).

  17. Chemical composition of the clays as indicator raw material sources

    Directory of Open Access Journals (Sweden)

    Khramchenkova Rezida Kh

    2014-06-01

    Full Text Available The paper presents the results of study on the chemical composition of unglazed pottery from the excavations of the Bulgar fortified settlement site and the clay, selected from the modern deposits of ceramic raw materials located near the medieval settlement sites. Significant differences in macro- and microelement composition of different groups of ceramics have been revealed. The difference in the macroelemental composition is largely determined by the ceramic fabric recipe. Thus, the high calcium content corresponds to the addition of river shells, the high content of silicon results from sand addition. A more interesting picture has been revealed in the course of studies of the so-called “trace elements” (microelements. Nine groups of ceramics with different elemental set have been distinguished. The first two groups consist of imported ceramics; other groups have demonstrated a rather pronounced elemental composition. The most notable variations are observed in chromium, vanadium and nickel content. Similar microelement composition variety has been observed in clays from deposits of different localization, while the concentration of the mentioned elements in a variety of clays also differs considerably. Therefore, marker elements typical of different clays have been identified. A comparative analysis of the data obtained for clay raw materials and ceramics has been conducted. The results demonstrate the potential of studying the elemental composition in order to determine the localization of the raw material sources for ceramic production.

  18. On the chemical composition of Titan's dry lakebed evaporites

    CERN Document Server

    Cordier, Daniel; Ferreira, Abel

    2013-01-01

    Titan, the main satellite of Saturn, has an active cycle of methane in its troposphere. Among other evidence for a mechanism of evaporation at work on the ground, dry lakebeds have been discovered. Recent Cassini infrared observations of these empty lakes have revealed a surface composition poor in water ice compared to that of the surrounding terrains --- suggesting the existence of organic evaporites deposits. The chemical composition of these possible evaporites is unknown. In this paper, we study evaporite composition using a model that treats both organic solids dissolution and solvent evaporation. Our results suggest the possibility of large abundances of butane and acetylene in the lake evaporites. However, due to uncertainties of the employed theory, these determinations have to be confirmed by laboratory experiments.

  19. Preliminary study of chemical compositional data from Amazon ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Toyota, Rosimeiri G.; Munita, Casimiro S.; Luz, Fabio A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: rosimeiritoy@yahoo.com.br; Neves, Eduardo G. [Museu de Arqueologia e Etnolgia, Sao Paulo, SP (Brazil)]. E-mail: egneves@usp.br; Oliveira, Paulo M.S. [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Inst. de Matematica e Estatistica]. E-mail: poliver@usp.br

    2005-07-01

    Eighty seven ceramic samples from Acutuba, Lago Grande and Osvaldo archaeological sites located in the confluence of the rivers Negro and Solimoes were submitted to chemical analysis using instrumental neutron activation analysis to determine As, Ba, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Rb, Na, Nd, Sb, Sc, Sm, Ta, Tb, Th, Yb, Zn, and U. The database were studied using the Mahalanobis distance, and discriminant analysis. The results showed that the ceramics of each site differ from each other in chemical composition and that they form three different groups. Chemical classification of the ceramics suggests that vessels were made locally, as only ceramics from the same area show homogeneity of data. (author)

  20. Peculiarities of chemical composition of sainfoin seeds powder

    Directory of Open Access Journals (Sweden)

    Natalia Aleksandrovna Tarasenko

    2015-09-01

    Full Text Available This paper is devoted to studying chemical composition of the powder of the seeds of non-traditional legume, sainfoin. The experimental studies showed that crushed seeds of sainfoin make a flowing fine powder of light brown color with a pleasant unpronounced specific smell with floral notes. The taste is grassy with the after-taste typical for legumes. The chemical composition of sainfoin seeds is dominated by proteins and fiber, and fat content does not exceed 8%. The total content of amino-acids is 26.94/100 g of the product, with the share of indispensable ones being 37.85%. The limiting amino acid is tryptophan (48.0 %. By the composition of essential amino acids, proteins of sainfoin seeds are slightly inferior to the proteins of soybean seeds, but are better than the proteins of peanut seeds. The composition of fatty acid of the lipid complex of sainfoin seeds is dominated by (over 40% of the total linolenic ω-3 acid with sufficiently low (less than 20% of the total content of linoleic ω-6 acid. The lipid composition of sainfoin seeds, along with triacylglycerols, contains about 40% of related lipids, which are dominated by sterols, aliphatic alcohols, phospholipids and tocopherols. All this makes the lipid complex of sainfoin seed a promising means of adjusting fatty acids composition in food products of functional and specialized purpose, dietary supplements, and a valuable raw material for creating pharmaceutical substances and preparations. Adding sainfoin seeds powder into the nutritive medium has no inhibitory effect on development of the tested organism. At the same time, 58% of the organism's physiological need for protein is satifsied, as compared to caseine.

  1. Bioactive carbon-PEEK composites prepared by chemical surface treatment.

    Science.gov (United States)

    Miyazaki, Toshiki; Matsunami, Chisato; Shirosaki, Yuki

    2017-01-01

    Polyetheretherketone (PEEK) has attracted much attention as an artificial intervertebral spacer for spinal reconstruction. Furthermore, PEEK plastic reinforced with carbon fiber has twice the bending strength of pure PEEK. However, the PEEK-based materials do not show ability for direct bone bonding, i.e., bioactivity. Although several trials have been conducted for enabling PEEK with bioactivity, few studies have reported on bioactive surface modification of carbon-PEEK composites. In the present study, we attempted the preparation of bioactive carbon-PEEK composites by chemical treatments with H2SO4 and CaCl2. Bioactivity was evaluated by in vitro apatite formation in simulated body fluid (SBF). The apatite formation on the carbon-PEEK composite was compared with that of pure PEEK. Both pure PEEK and carbon-PEEK composite formed the apatite in SBF when they were treated with H2SO4 and CaCl2; the latter showed higher apatite-forming ability than the former. It is conjectured that many functional groups able to induce the apatite nucleation, such as sulfo and carboxyl groups, are incorporated into the dispersed carbon phase in the carbon-PEEK composites.

  2. Loovkirjutamist õpetab Philip Gross

    Index Scriptorium Estoniae

    2011-01-01

    T.S. Elioti luulepreemia laureaat Philip Gross on Tallinna Ülikooli talvekooli rahvusvahelise kursuse "Poetry: A Conversation between Words and Silence" läbiviija. Oma seminarides keskendub ta lisaks loovkirjutamisele ka loova lugemise vajadusele

  3. Gross Sales Tax Collections

    Data.gov (United States)

    City of Jackson, Mississippi — This data is captured directly from the MS Department of Revenue and specific to the City of Jackson. It is compiled from Gross Sales Tax reported by taxpayers each...

  4. A bootstrap estimation scheme for chemical compositional data with nondetects

    Science.gov (United States)

    Palarea-Albaladejo, J; Martín-Fernández, J.A; Olea, Ricardo A.

    2014-01-01

    The bootstrap method is commonly used to estimate the distribution of estimators and their associated uncertainty when explicit analytic expressions are not available or are difficult to obtain. It has been widely applied in environmental and geochemical studies, where the data generated often represent parts of whole, typically chemical concentrations. This kind of constrained data is generically called compositional data, and they require specialised statistical methods to properly account for their particular covariance structure. On the other hand, it is not unusual in practice that those data contain labels denoting nondetects, that is, concentrations falling below detection limits. Nondetects impede the implementation of the bootstrap and represent an additional source of uncertainty that must be taken into account. In this work, a bootstrap scheme is devised that handles nondetects by adding an imputation step within the resampling process and conveniently propagates their associated uncertainly. In doing so, it considers the constrained relationships between chemical concentrations originated from their compositional nature. Bootstrap estimates using a range of imputation methods, including new stochastic proposals, are compared across scenarios of increasing difficulty. They are formulated to meet compositional principles following the log-ratio approach, and an adjustment is introduced in the multivariate case to deal with nonclosed samples. Results suggest that nondetect bootstrap based on model-based imputation is generally preferable. A robust approach based on isometric log-ratio transformations appears to be particularly suited in this context. Computer routines in the R statistical programming language are provided. 

  5. Chemical composition of the sediment from Lake 20 (Antarctica

    Directory of Open Access Journals (Sweden)

    Daria ROSSI

    2000-02-01

    Full Text Available Lake 20 (19,000 m2 is located on the coast of the Ross Sea, in the North-Central part of Victoria Land, and its surface is ice-free between the end of December and early February. Within the framework of the Italian National Research Programme in Antarctica, a study was made of the chemical composition of sediments from the lake, with the intention of using this information to contribute to a better understanding of the processes involved in the long range transport of pollutants and their role in global changes. A sediment core from Lake 20 (Antarctica, 18 cm long, was collected in 1994, sliced into 2 cm sections and analysed using X Ray fluorescence spectrometry for 17 elements (Si, Al, Ca, K, Fe, Mg, Ti, S, P, Pb, Zn, Cu, Ni, Mn, Cr, Na, Cl, by CHN Elemental Analyser for C and N, by Flameless Atomic Absorption Spectrometry for As, and by Cold Vapour Atomic Absorption Spectrometry for Hg. The chemical composition of the sediments is consistent with the known geochemical characteristics of the drainage basin. While the chemical analyses reveal that sedimentation in Lake 20 has changed through time, the variations along the core are most probably related to the climatic evolution of the area, to the consequent changes in weathering processes, and possibly to an increase in the primary productivity of the lake, rather than to anthropogenic influences on the biogeochemical cycles of the elements.

  6. Dynamics of the chemical composition of rainwater throughout Hurricane Irene

    Directory of Open Access Journals (Sweden)

    K. M. Mullaugh

    2013-03-01

    Full Text Available Sequential sampling of rainwater from Hurricane Irene was carried out in Wilmington, NC, USA on 26 and 27 August 2011. Eleven samples were analyzed for pH, major ions (Cl−, NO3−, SO42−, Na+, K+, Mg2+, Ca2+, NH4+, dissolved organic carbon (DOC and hydrogen peroxide (H2O2. Hurricane Irene contributed 16% of the total rainwater and 18% of the total chloride wet deposition received in Wilmington NC during all of 2011. This work highlights the main physical factors influencing the chemical composition of tropical storm rainwater: wind speed, wind direction, back trajectory and vertical mixing, time of day and total rain volume. Samples collected early in the storm, when winds blew out of the east, contained dissolved components indicative of marine sources (salts from sea spray and low DOC. The sea-salt components in the samples had two maxima in concentration during the storm the first of which occurred before the volume of rain had sufficiently washed out sea salt from the atmosphere and the second when back trajectories showed large volumes of marine surface air were lifted. As the storm progressed and winds shifted to a westerly direction, the chemical composition of the rainwater became characteristic of terrestrial storms (high DOC and NH4+ and low sea salt. This work demonstrates that tropical storms are not only responsible for significant wet deposition of marine components to land, but terrestrial components can also become entrained in rainwater, which can then be delivered to coastal waters via wet deposition. This study also underscores why analysis of one composite sample can lead to an incomplete interpretation of the factors that influence the chemically divergent analytes in rainwater during extreme weather events.

  7. Assessment of kidney stone and prevalence of its chemical compositions.

    Science.gov (United States)

    Pandeya, A; Prajapati, R; Panta, P; Regmi, A

    2010-09-01

    Kidney stone analysis is the test done on the stone which cause problems when they block the flow of urine through or out of the kidneys. The stones cause severe pain and are also associated with morbidity and renal damage. There is also no clear understanding on the relative metabolic composition of renal calculi. Hence, the study is aimed to find out the chemical composition of it which can guide treatment and give information that may prevent more stones from forming. The study was carried out on the stones that had been sent to the department of Biochemistry (n = 99; M = 61; F = 38; Mean age: 33.6 +/- 14.4 years) Approximately 98.9% of stones were composed of oxalate, 95.9% of Calcium, 85.8% of phosphate, 62.6% of Urate, 46.4% of Ammonium and very few percentages of Carbonate.

  8. Chemical composition of lipophilic extractives from grey alder (Alnus incana

    Directory of Open Access Journals (Sweden)

    Oskars Bikovens

    2013-02-01

    Full Text Available The chemical composition of the lipophilic extractives in the hexane extracts from grey alder bark, knotwood, and cones has been investigated by gas chromatography and gas chromatography-mass spectrometry. The efficiency of two extraction methods was compared. The highest amount of lipophilic extractives (about 9% of o.d. material was observed in grey alder cone, while the lowest (about 3% was found in knotwood. The three different morphological parts of alder showed significant differences not only in the content but also in composition of extractives, namely fatty acids, triglycerides, and triterpenes. The main identified compounds were triterpenoids (lupen-3-one, lupeol, betulone, betulinol, and betulinic acid in bark, and triglycerides in cones. The major group in knotwood was free fatty acids (mainly linoleic acid, 18:2.

  9. Chemical composition and health effects of Tartary buckwheat.

    Science.gov (United States)

    Zhu, Fan

    2016-07-15

    Tartary buckwheat (Fagopyrum tataricum) contains a range of nutrients including bioactive carbohydrates and proteins, polyphenols, phytosterols, vitamins, carotenoids, and minerals. The unique composition of Tartary buckwheat contributes to their various health benefits such as anti-oxidative, anti-cancer, anti-hypertension, anti-diabetic, cholesterol-lowering, and cognition-improving. Compared with the more widely cultivated and utilised common buckwheat (F. esculentum), Tartary buckwheat tends to contain higher amounts of certain bioactive components such as rutin, therefore, showing higher efficiency in preventing/treating various disorders. This review summarises the current knowledge of the chemical composition of Tartary buckwheat, and their bio-functions as studied by both in vitro and in vivo models. Tartary buckwheat can be further developed as a sustainable crop for functional food production to improve human health.

  10. Analysis of chemical composition of high viscous oils

    Directory of Open Access Journals (Sweden)

    Irina Germanovna Yashchenko

    2014-07-01

    Full Text Available The spatial distribution of viscous oils which are considered as an important reserve for oil-production in future were studied on base of information from global database on oil physical and chemical properties. Changes in chemical composition of viscous oils in different basins and continents were analyzed as well. It is shown, on average, viscous oils are sulfur-bearing, low paraffin, highly resinous oils with an average content of asphaltenes and low content of the fraction boiling at 200 C. Study results of viscous oils peculiarities of Canada, Russia and Venezuela are given. The analysis results can be used to determine the optimal layouts and conditions of oil transportation, to improve the search methods of geochemical exploration, and to solve other problems in the oil chemistry.

  11. [Chemical composition of seeds and testa of Vicia faba L].

    Science.gov (United States)

    Vetter, J

    1995-03-01

    Different chemical components were analysed in the seeds and in testa of Vicia faba. The seeds contain a relatively high crude protein (27.5%), a low crude fat (3.36%) content; and the lignin concentration is low (2.65%). The testa of the seeds has a very high fibre concentration and is a significant Ca-source (1.86 g/kg). The higher macroelement concentrations in the seeds were measured from K, P and Mg. The main microelements (Fe, Mn, Cu, Zn) have significant higher concentrations in the seed than in the testa. The amino acid composition of seeds is positive (compared to data of white lupine), the rate of essential amino acids is good. The concentrations of the examined antinutritive organic constituents, especially of alkaloids, are low. On the basis of chemical analysis, the production and utilisation of seeds of Vicia faba is recommended.

  12. Nepheline structural and chemical dependence on melt composition

    Energy Technology Data Exchange (ETDEWEB)

    Marcial, José; Crum, Jarrod; Neill, Owen; McCloy, John

    2016-02-01

    Nepheline crystallizes upon slow-cooling in some melts concentrated in Na2O and Al2O3, which can result in a residual glass phase of low chemical durability. Nepheline can incorporate many components often found in high-level waste radioactive borosilicate glass, including glass network ions (e.g., Si, Al, Fe), alkali metals (e.g., Cs, K, Na, and possibly Li), alkaline-earth metals (e.g., Ba, Sr, Ca, Mg), and transition metals (e.g., Mn, and possibly Cr, Zn, Ni). When crystallized from melts of different compositions, nepheline chemistry varies as a function of starting glass composition. Five simulated high level nuclear waste borosilicate glasses shown to crystallize large fractions of nepheline on slow cooling, were selected for study. These melts constituted a range of Al2O3, B2O3, CaO, Na2O, K2O, Fe2O3, and SiO2 compositions. Compositional analyses of nepheline crystals in glass by electron probe micro-analysis (EPMA) indicate that boron is unlikely to be present in any significant concentration, if at all, in nepheline. Also, several models are presented for calculating the fraction of vacancies in the nepheline structure.

  13. Stevia rebaudiana Bertoni - chemical composition and functional properties.

    Science.gov (United States)

    Marcinek, Katarzyna; Krejpcio, Zbigniew

    2015-01-01

    Sweetleaf (Stevia rebaudiana Bertoni), currently investigated by many researchers, has been known and used for more than a thousand years indigenous tribes of South America, who called it "kaa-hee" ("sweet herb"). Thanks to its chemical composition and processability sweetleaf may be an alternative for synthetic sweeteners. Nutritional and health-promoting aspects of Stevia rebaudiana are presently being studied in many research centres. The aim of this study is to present nutritional and health-promoting value of the still-little known sweetleaf.

  14. Chemical composition and quality of sweet sorghum and maize silages

    OpenAIRE

    Zbigniew PODKÓWKA; Lucyna PODKÓWKA

    2011-01-01

    Sweet sorghum (Sorghum saccharatum) silage, maize (Zea mays) silage, and sorghum and maize (1:1) silage were investigated. The silages were analysed for chemical composition, quality and aerobic stability. Dry matter was the lowest (20.88%) in sorghum silage and the highest (37.45%) in maize silage. In sorghum silage, the concentration of crude ash and crude fibre was higher, and that of crude protein, crude fat and N-free extractives lower compared to maize silage. Neutral detergent fibre an...

  15. Chemical composition and fatty acid contents in farmed freshwater prawns

    Directory of Open Access Journals (Sweden)

    Carolina de Gasperi Portella

    2013-08-01

    Full Text Available The objective of this work was to evaluate the chemical composition and fatty acid contents of Amazonian and giant river prawns. After four-month farming, with the same diet for both species, palmitic and stearic acids were the main saturated fatty acids. Oleic acid was the main monounsatured fatty acid, and the eicosapentaenoic and docosahexaenoic acids were the most abundant polyunsaturated acids. Amazonian prawn has higher levels of protein and polyunsaturated fatty acids than those of the giant river prawn, which shows its potential for aquaculture.

  16. The Influence of Chemical Composition on LNG Pool Vaporization

    Directory of Open Access Journals (Sweden)

    Yu Zhidong

    2017-01-01

    Full Text Available A model is used to examine the influence of chemical composition on the vaporization rate of LNG during spreading. Calculations have been performed whereby the vaporization rate of the LNG mixtures has been compared to the vaporization of pure methane under the initial conditions. The detailed results indicate that the vaporization rate LNG mixture is different to that of pure methane. LNG as the liquid mixture gets rich in ethane and isobaric latent heat increases rapidly, leading to the rate vaporization of LNG decrease in compared to pure methane.

  17. Stevia rebaudiana Bertoni – chemical composition and functional properties

    Directory of Open Access Journals (Sweden)

    Katarzyna Marcinek

    2015-06-01

    Full Text Available Sweetleaf (Stevia rebaudiana Bertoni, currently investigated by many researchers, has been known and used for more than a thousand years indigenous tribes of South America, who called it “kaa-hee” (“sweet herb”. Thanks to its chemical composition and processability sweetleaf may be an alternative for synthetic sweeteners. Nutritional and health-promoting aspects of Stevia rebaudiana are presently being studied in many research centres. The aim of this study is to present nutritional and health-promoting value of the still-little known sweetleaf.

  18. Chemical vapor deposited fiber coatings and chemical vapor infiltrated ceramic matrix composites

    Energy Technology Data Exchange (ETDEWEB)

    Kmetz, M.A.

    1992-01-01

    Conventional Chemical Vapor Deposition (CVD) and Organometallic Chemical Vapor Deposition (MOCVD) were employed to deposit a series of interfacial coatings on SiC and carbon yarn. Molybdenum, tungsten and chromium hexacarbonyls were utilized as precursors in a low temperature (350[degrees]C) MOCVD process to coat SiC yarn with Mo, W and Cr oxycarbides. Annealing studies performed on the MoOC and WOC coated SiC yarns in N[sub 2] to 1,000[degrees]C establish that further decomposition of the oxycarbides occurred, culminating in the formation of the metals. These metals were then found to react with Si to form Mo and W disilicide coatings. In the Cr system, heating in N[sub 2] above 800[degrees]C resulted in the formation of a mixture of carbides and oxides. Convention CVD was also employed to coat SiC and carbon yarn with C, Bn and a new interface designated BC (a carbon-boron alloy). The coated tows were then infiltrated with SiC, TiO[sub 2], SiO[sub 2] and B[sub 4]C by a chemical vapor infiltration process. The B-C coatings were found to provide advantageous interfacial properties over carbon and BN coatings in several different composite systems. The effectiveness of these different coatings to act as a chemically inert barrier layer and their relationship to the degree of interfacial debonding on the mechanical properties of the composites were examined. The effects of thermal stability and strength of the coated fibers and composites were also determined for several difference atmospheres. In addition, a new method for determining the tensile strength of the as-received and coated yarns was also developed. The coated fibers and composites were further characterized by AES, SEM, XPS, IR and X-ray diffraction analysis.

  19. Public Health Risk Conditioned by Chemical Composition of Ground Water

    Science.gov (United States)

    Yankovich, E.; Osipova, N.; Yankovich, K.; Matveenko, I.

    2016-03-01

    The article studies the public health potential risk originated from water consumption and estimated on the basis of the groundwater chemical composition. We have processed the results of chemical groundwater analysis in different aquifers of Tomsk district (Tomsk Oblast, Russia). More than 8400 samples of chemical groundwater analyses were taken during long-term observation period. Human health risk assessment of exposure to contaminants in drinking water was performed in accordance with the risk assessment guidance for public health concerning chemical pollution of the environment (Russian reference number: 2.1.10.1920-04-M, 2004). Identified potential risks were estimated for consuming water of each aquifer. The comparative analysis of water quality of different aquifers was performed on the basis of the risk coefficient of the total non-carcinogenic effects. The non-carcinogenic risk for the health of the Tomsk district population due to groundwater consumption without prior sanitary treatment was admitted acceptable. A rather similar picture is observed for all aquifers, although deeper aquifers show lower hazard coefficients.

  20. Chemical composition and larvicidal activity of Rollinia leptopetala (Annonaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Feitosa, Edinilza M.A.; Arriaga, Angela M.C.; Lemos, Telma L.G.; Oliveira, M. Conceicao F. de; Vasnconcelos, Jackson Nunes e; Lima, Jefferson Q.; Malcher, Grazielle T. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica]. E-mail: angelamcarriaga@yahoo.com.br; Santiago, Gilvandete M.P. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Farmacia; Nascimento, Ronaldo F. do [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Quimica Analitica e Fisico-Quimica; Braz-Filho, Raimundo [Universidade Estadual do Norte Fluminense (UENF), Campos dos Goytacases, RJ (Brazil). Setor de Quimica de Produtos Naturais. Lab. de Ciencias Quimicas

    2009-07-01

    The aim of present study was to describe the chemical composition of the essential oils from the leaf and stem of Rollinia leptopetala R. E. Fries (Annonaceae) and to evaluate the larvicidal activities of these essential oils, of the methanol extract from roots of this plant and of the oxoaporphine alkaloid, liriodenine (1) against the third-instar of Aedes aegypti larvae. The methanol extract from the roots showed larvicidal activity with LC{sub 50} 64.6 {+-} 1.5 ppm. Higher activity was observed for the isolated alkaloid liriodenine (1), LC{sub 50} 3.6 {+-} 0.4 ppm. The essential oils from the leaves and stems, also exhibited larvicidal activity with LC{sub 50} 104.7 {+-} 0.2 and 34.7 {+-} 0.3 ppm, respectively. These results suggest R. leptopetala as a source of natural larvicidal compounds. This is the first report about the chemical composition and larvicidal activity of the leaf and stem essential oils of R. leptopetala. (author)

  1. Chemical Composition of the Essential Oil from Chaerophyllum temulum (Apiaceae).

    Science.gov (United States)

    Stamenković, Jelena G; Stojanović, Gordana S; Radojković, Ivana R; Petrović, Goran M; Zlatković, Bojan K

    2015-08-01

    The present study reports the chemical composition on the essential oil obtained from fresh roots, stems, inflorescences and fruits of Chaerophyllum temulum. In all samples, except the roots, the most dominant components were sesquiterpene hydrocarbons. (Z)-Falcarinol was the principal constituent of the root essential oils (61.7% at the flowering stage and 62.3% at the fruiting stage). The blossom oil was dominated by (Z,E)-α-famesene (23.4%), (E)-β-farnesene (9.0%) and germacrene D-4-ol (9%), whereas the oil from the fruit had germacrene D-4-ol (27.6%) as its main compound, accompanied by (Z,E)-α-famesene (13.4%). Germacrene D was the most abundant component of the stem essential oil (38.4% at the flowering stage and 32.5% at the fruiting stage). The obtained results show that the qualitative composition of the oil depends on the part of the plant which is analyzed, while the quantitative composition of the main components depends on the growing stage of the plant.

  2. Chemical composition of the circumstellar disk around AB Aurigae

    CERN Document Server

    Pacheco-Vázquez, S; Agúndez, M; Pinte, C; Alonso-Albi, T; Neri, R; Cernicharo, J; Goicoechea, J R; Berné, O; Wiesenfeld, L; Bachiller, R; Lefloch, B

    2015-01-01

    Aims. Our goal is to determine the molecular composition of the circumstellar disk around AB Aurigae (hereafter, AB Aur). AB Aur is a prototypical Herbig Ae star and the understanding of its disk chemistry is of paramount importance to understand the chemical evolution of the gas in warm disks. Methods. We used the IRAM 30-m telescope to perform a sensitive search for molecular lines in AB Aur as part of the IRAM Large program ASAI (A Chemical Survey of Sun-like Star-forming Regions). These data were complemented with interferometric observations of the HCO+ 1-0 and C17O 1-0 lines using the IRAM Plateau de Bure Interferometer (PdBI). Single-dish and interferometric data were used to constrain chemical models. Results. Throughout the survey, several lines of CO and its isotopologues, HCO+, H2CO, HCN, CN and CS, were detected. In addition, we detected the SO 54-33 and 56-45 lines, confirming the previous tentative detection. Comparing to other T Tauri's and Herbig Ae disks, AB Aur presents low HCN 3-2/HCO+ 3-2 ...

  3. COMPARATIVE STUDY OF THE BODY WEIGHT CHARACTERISTICS AND EFFECT OF DRYING ON CHEMICAL COMPOSITION OF THREE NILE FISH SPECIES (Oreochromis Niloticus, Labeo Niloticus AND Clarias Spp.)

    OpenAIRE

    Hassan M. YAGOUB ADAM; Ahmed Mohamed MUSA AHMED; Abdelwahab M ADAM IBRAHIM; Fathi MIRGHANI YOUSIF

    2015-01-01

    This study was carried out to compare the body weights of three different Nile fish species (Oreochromis niloticus, Labeo niloticus and Clarias spp.), and the impact of direct sun drying on their chemical composition.36 samples were collected (12 samples/ species). Averages of total length, standard length (cm) and gross body weight (gm) were determined and the findings were as follows: 36.5, 29.75 and 930 for Oreochromis niloticus, 49, 39.5 and 1210 for Labeo niloticus and 49, 45 and 977.5 f...

  4. Effect of chemical composition of sheep’s milk on the chemical composition of Livno and Travnik cheese

    Directory of Open Access Journals (Sweden)

    Amina Hrković

    2011-06-01

    Full Text Available Bosnia and Herzegovina has a centuries-old tradition in the family dairy products, among which 2-3 types of cheeses dominate. Well known dairy products in BiH are indigenous Livno and Travnik cheese, a group of cheeses produced from thermally untreated raw sheep milk. The aim of this study was assessing the effects of certain parameters on the chemical composition of the milk composition of indigenous cheeses - Livno and Travnik. Two manufacturers within two different locations (Livno and Travnik during summer grazing of sheep, were selected for this research. The study included 117sheep (Livno 57 sheep, Travnik 60 sheep. The cheese milk was used for determination of fat, protein and lactose content. Six samples were taken from obtained cheeses: 3 samples of Livno and 3samples of Travnik cheese, which means one for each sampling period. In cheese dry matter content, water, fat, fat in dry matter and acidity (pH were determined, and then correlation between the constituents of milk and cheese ingredients content was set. The most common causes of such phenomenon is non-standard production, storage and ripening. On Travnik area, the content of fat and milk protein varied according to sampling period, which can be attributed to the already mentioned diet and stage of lactation. At the same time the protein content decreased mainly by the end of lactating period. Lactose content has proven to be the most stable parameter of milk. In both investigated cheese samples slightly higher water content was found compared to normal values for these two local cheese, while the proportion of fat and dry matter varied within the sampling period. Variation of certain parameters of the chemical composition of investigated samples of Livno and Travnik cheese, as well as their correlation with parameters of milk is primarily a consequence of changing the chemical composition of milk as the basic raw materials and/or significant variations in technology that could

  5. Chemical composition of Chenopodium botrys L. (Chenopodiaceae essential oil

    Directory of Open Access Journals (Sweden)

    Ljubica Adji Andov

    2014-08-01

    Full Text Available Chemical composition of essential oil isolated from aerial parts of Chenopodium botrys L. (Chenopodiaceae collected from five different locations in the Republic of Macedonia was analysed by GC/FID/MS. Seventy five compounds were identified representing 90.02- 91.24% of the oil. The analysis has shown that the oils were rich in sesquiterpenе components (83.18-87.54% comprising elemol acetat (9.88%-21.98%, seline-11-en-4α-ol (9.81%-13.5%, selina-3,11-dien-6α-ol (6.42%-9.71% and elemol (5.57%-9.49% as major oxygen containing sesquiterpenes, followed by lower content of α-eudesmol acetat (3.24%-4.11%, α-chenopodiol (2.42%-5.43%, botrydiol (1.87-5.73% and α-chenopodiol-6-acetat (1.9%-4.73%.

  6. Thymus vulgaris essential oil: chemical composition and antimicrobial activity.

    Science.gov (United States)

    Borugă, O; Jianu, C; Mişcă, C; Goleţ, I; Gruia, A T; Horhat, F G

    2014-01-01

    The study was designed to determine the chemical composition and antimicrobial properties of the essential oil of Thymus vulgaris cultivated in Romania. The essential oil was isolated in a yield of 1.25% by steam distillation from the aerial part of the plant and subsequently analyzed by GC-MS. The major components were p-cymene (8.41%), γ-terpinene (30.90%) and thymol (47.59%). Its antimicrobial activity was evaluated on 7 common food-related bacteria and fungus by using the disk diffusion method. The results demonstrate that the Thymus vulgaris essential oil tested possesses strong antimicrobial properties, and may in the future represent a new source of natural antiseptics with applications in the pharmaceutical and food industry.

  7. Chemical vapor infiltration of TiB{sub 2} composites

    Energy Technology Data Exchange (ETDEWEB)

    Besmann, T.M. [Oak Ridge National Laboratory, TN (United States)

    1995-05-01

    This program is designed to develop a Hall-Heroult aluminum smelting cathode with substantially improved properties. The carbon cathodes in current use require significant anode-to-cathode spacing in order to prevent shorting, causing significant electrical inefficiencies. This is due to the non-wettability of carbon by aluminum which causes instability in the cathodic aluminum pad. It is suggested that a fiber reinforced-TiB{sub 2} matrix composite would have the requisite wettability, strength, strain-to-failure, cost, and lifetime to solve this problem. The approach selected to fabricate such a cathode material is chemical vapor infiltration (CVI). This program is designed to evaluate potential fiber reinforcements, fabricate test specimens, and test the materials in a static bath and lab-scale Hall cell.

  8. Antimicrobial activity of Iranian propolis and its chemical composition

    Directory of Open Access Journals (Sweden)

    Yaghoubi M.J.

    2007-04-01

    Full Text Available The objective of this study was to investigate the antimicrobial activity of ethanol extract of Iranian propolis on some microorganisms using disc diffusion method. The chemical composition of the propolis was also investigated using thin layer chromatography and spectrophotometric methods. Ethanol extract of propolis showed activity only against Gram-positives and fungi, whereas no activity was observed against Gram-negatives. Thin layer chromatography screening revealed the presence of pinocembrine, caffeic acid, kaempferol, phenethyl caffeate, chrysin, and galangin in Iranian propolis. The total flavonoid and phenolic contents were 7.3% and 36%, respectively, which suggests that the strong antimicrobial activity of Iranian propolis may be due to high levels of phenolic and flavonoid compounds.

  9. Rapid fabrication of ceramic composite tubes using chemical vapor infiltration

    Energy Technology Data Exchange (ETDEWEB)

    Starr, T.L.; Chiang, D. [Georgia Inst. of Tech., Atlanta, GA (United States). School of Materials Science and Engineering; Besmann, T.M.; Stinton, D.P.; McLaughlin, J.C.; Matlin, W.M. [Oak Ridge National Lab., TN (United States)

    1996-06-01

    Ceramic composite tubes can be fabricated with silicon carbide matrix and Nicalon fiber reinforcement using forced flow-thermal gradient chemical vapor infiltration (FCVI). The process model GTCVI is used to design the equipment configuration and to identify conditions for rapid, uniform densification. The initial injector and mandrel design produced radial and longitudinal temperature gradients too large for uniform densification. Improved designs have been evaluated with the model. The most favorable approach utilizes a free-standing preform and an insulated water-cooled gas injector. Selected process conditions are based on the temperature limit of the fiber, matrix stoichiometry and reagent utilization efficiency. Model runs for a tube 12 inches long, 4 inches OD and 1/4 inch wall thickness show uniform densification in approximately 15 hours.

  10. Yield and chemical composition of fractions from fermented shrimp biowaste.

    Science.gov (United States)

    Narayan, Bhaskar; Velappan, Suresh Puthanveetil; Zituji, Sakhare Patiram; Manjabhatta, Sachindra Nakkerike; Gowda, Lalitha Ramakrishna

    2010-01-01

    Chemical composition of chitinous residue and fermentation liquor fractions, obtained from fermented shrimp biowaste, was evaluated in order to explore their potential for further utilization. Lyophilization of the liquor fraction obtained after fermentation resulted in a powder rich in both protein (30%) and carotenoids (217.18 +/- 2.89 microg/g). The yield of chitinous residue was 44% (w/w) whereas the yield of lyophilized powder was >25% (w/v). About 69% of total carotenoids were recovered by fermentation. Fermentation resulted in the removal of both protein as well as ash content from the shrimp biowaste, as indicated by approximately 92% deproteination and >76% demineralization, respectively. Post fermentation, the residue had a chitin content of >90%. The lyophilized liquor fraction had all the essential amino acids (except threonine) in quantities comparable to Food & Agriculture Organization/World Health Organization reference protein. The composition of fermentation liquor is indicative of its potential for application as an amino acid supplement in aquaculture feed formulations.

  11. [Chemical composition and biological quality of defatted hazelnut flour].

    Science.gov (United States)

    Villarroel, M; Biolley, E; Schneeberger, R; Ballester, D; Santibáñez, S

    1989-06-01

    The results of the chemical composition and biological quality of deffated hazel nut flour are shown. The samples analyzed contained significant amounts of proteins (19%) comparable to legume flour, higher than cereals and lower than deffated oleaginous flours. The oil extracted from the seed was analyzed and the average results obtained were the following: Refraction index, 1.47; saponification No. 184.8; iodine No. 85.0. The average composition of the fatty acids obtained by gas liquid chromatography was: Palmitic acid 2.3% Palmitoleic acid 37.0% Stearic acid 0.5% Oleic acid 39.5% Linoleic acid 6.9% Linolenic acid 1.1% Eicosanoic acid 2.3% Eicosaenoic acid 4.6% Docosenoic acid 3.4% Tetraeicosanoic acid 0.3% These results indicate a good-quality oil due to the low content of linolenic acid. The nutritive value of the deffated meal measured in the rats gave a net protein ratio (NPR) of 3.58, lower than the corresponding casein value (4.10). The true protein digestibility measured in the rat gave a value of 7.3%, compared to 95% for casein. The amounts of iron and phosphorous are comparatively lower than those reported for rape-seed meal and sunflower meal.

  12. Chemical Composition of Iran's Pistacia atlantica Cold-Pressed Oil

    Directory of Open Access Journals (Sweden)

    M. Saber-Tehrani

    2013-01-01

    Full Text Available The lipid fraction of Pistacia atlantica seeds was extracted for the first time by means of cold-press technique and analyzed for its chemical composition. The fatty acids, sterols, triacylglycerols (TAG, tocopherols, polyphenols, and pigments were identified and their concentrations were determined by means of reversed-phase high-performance liquid chromatography (RP-HPLC and gas chromatography (GC. Because of its high content of unsaturated fatty acids, it might prove to be of value in diets and it may be used as edible cooking or salad oils or for margarine manufacture. Pistacia atlantica seed oil has the unique sterols and tocopherols content providing source of natural antioxidants. The main triacylglycerols were SLL + PLO, SOL + POO, OOLn + PLL, OOO, and SOO. This paper examined the phenolic fraction of Pistacia atlantica seed oil. Moreover, caffeic acid followed by cinnamic acid, pinoresinol, vanillin, p-Coumaric acid, ferulic acid, and o-Coumaric acid was also determined. This paper presents the first investigation of chlorophyll's and carotene's composition in Pistacia atlantica seed oil. Furthermore, pheophytin a was the major component, followed by luteoxanthin, neoxanthin, violaxanthin, lutein, lutein isomers, chlorophyll a, chlorophyll a′, and pheophytin a′ were also determined.

  13. Chemical Composition and Antioxidant Capacity of Three Plum Cultivars

    Directory of Open Access Journals (Sweden)

    Sandra Voća

    2009-12-01

    Full Text Available The aim of this study was to determine the chemical composition and antioxidants capacity of three plum cultivars, namely ‘Top’, ‘Elena’ and ‘Bistrica’. Fruits were harvested and following parameters were determined: dry matter, total acids (TA, total soluble solids (TSS, pH, vitamin C, total phenols, nonflavonoids and antioxidant capacity. Differences between cultivars for most of the chemical parameters were observed. The cultivar ‘Bistrica’ showed higher values of dry matter, TSS, vitamin C and pH value, while ‘Top’ had higher total acids value and lowest TSS, dry matter, vitamin C and pH. Total phenolics content varied from 157.70 mg in ‘Elena’ to 344.10 mg in ‘Bistrica’, expressed as gallic acid equivalents (GAE, on fresh weight basis. ‘Top’ contains the highest amount of non-flavonoids among cultivars studied. Therefore, ‘Bistrica’ and ‘Top’ show the highest antioxidant capacity, as well. There were significant differences between total phenolics and non-flavonoids content between ‘Elena’ and other two cultivars, while antioxidant capacity showed no significant difference (p ≤ 0.05. Total antioxidant capacity of fruits ranged from 3.10 mmol/kg in ‘Elena’ to 3.17 mmol/kg in ‘Top’ and ‘Bistrica’.

  14. Chemical Composition Measurements of LAWA44 Glass Samples

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Riley, W. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-11-15

    The U.S. Department of Energy (DOE) Office of River Protection (ORP) has requested that the Savannah River National Laboratory (SRNL) provide expert evaluation and experimental work in support of the River Protection Project vitrification technology development. DOE is building the Hanford Tank Waste Treatment and Immobilization Plant (WTP) at the Hanford Site in Washington to remediate 55 million gallons of radioactive waste that is temporarily stored in 177 underground tanks. The low-activity waste (LAW) fraction will be partitioned from the high-level waste (HLW). Both the LAW and HLW will then be vitrified into borosilicate glass using Joule-heated ceramic melters. Efforts are being made to increase the loading of Hanford tank wastes in the glass while conforming to processing requirements and product quality regulations. DOE-ORP has requested that SRNL support the advancement of glass formulations and process control strategies in key technical areas, as defined in the Task Technical and Quality Assurance Plan (TTQAP). One of these areas is enhancing waste glass composition/property models and broadening the compositional regions over which those models are applicable. In this report, SRNL provides chemical analysis results for several samples of a simulated LAW glass, designated LAWA44, provided by Pacific Northwest National Laboratory (PNNL) as part of an ongoing development task. The objective of the PNNL task is to determine the durability of this glass using EPA Method 1313, which will include test participants at Vanderbilt University and the University of Sheffield. A report on the compositions of similar glasses (referred to as the EPA-series glasses) was issued in March 2016.

  15. A New Mathematical Formulation of the Governing Equations for the Chemical Compositional Simulation

    CERN Document Server

    Bekbauov, Bakhbergen E; Berdyshev, Abdumauvlen

    2015-01-01

    It is the purpose of this work to develop new approach for chemical compositional reservoir simulation, which may be regarded as a sequential method. The development process can be roughly divided into the following two stages: (1) development of a new mathematical formulation for the sequential chemical compositional reservoir simulation, (2) implementation of a sequential solution approach for chemical compositional reservoir simulation based on the formulation described in this paper. This paper addresses the first stage of the development process by presenting a new mathematical formulation of the chemical compositional reservoir flow equations for the sequential simulation. The newly developed mathematical formulation is extended from the model formulation used in existing chemical compositional simulators. During the model development process, it was discovered that the currently used chemical compositional model estimates the adsorption effect on the transport of a component reasonably well but it viol...

  16. Chemical composition of atmospheric aerosols resolved via positive matrix factorization

    Science.gov (United States)

    Äijälä, Mikko; Junninen, Heikki; Heikkinen, Liine; Petäjä, Tuukka; Kulmala, Markku; Worsnop, Douglas; Ehn, Mikael

    2017-04-01

    Atmospheric particulate matter is a complex mixture of various chemical species such as organic compounds, sulfates, nitrates, ammonia, chlorides, black carbon and sea salt. As aerosol chemical composition strongly influences aerosol climate effects (via cloud condensation nucleus activation, hygroscopic properties, aerosol optics, volatility and condensation) as well as health effects (toxicity, carcinogenicity, particle morphology), detailed understanding of atmospheric fine particle composition is widely beneficial for understanding these interactions. Unfortunately the comprehensive, detailed measurement of aerosol chemistry remains difficult due to the wide range of compounds present in the atmosphere as well as for the miniscule mass of the particles themselves compared to their carrier gas. Aerosol mass spectrometer (AMS; Canagaratna et al., 2007) is an instrument often used for characterization of non-refractive aerosol types: the near-universal vaporization and ionisation technique allows for measurement of most atmospheric-relevant compounds (with the notable exception of refractory matter such as sea salt, black carbon, metals and crustal matter). The downside of the hard ionisation applied is extensive fragmentation of sample molecules. However, the apparent loss of information in fragmentation can be partly offset by applying advanced statistical methods to extract information from the fragmentation patterns. In aerosol mass spectrometry statistical analysis methods, such as positive matrix factorization (PMF; Paatero, 1999) are usually applied for aerosol organic component only, to keep the number of factors to be resolved manageable, to retain the inorganic components for solution validation via correlation analysis, and to avoid inorganic species dominating the factor model. However, this practice smears out the interactions between organic and inorganic chemical components, and hinders the understanding of the connections between primary and

  17. Mechanical properties of uniaxial natural fabric Grewia tilifolia reinforced epoxy based composites: Effects of chemical treatment

    CSIR Research Space (South Africa)

    Jayaramudu, J

    2014-07-01

    Full Text Available The effects of chemical treatment on the mechanical, morphological, and chemical resistance properties of uniaxial natural fabrics, Grewia tilifolia/epoxy composites, were studied. In order to enhance the interfacial bonding between the epoxy matrix...

  18. Chemical composition of olive oils of the cultivar Colombaia

    Directory of Open Access Journals (Sweden)

    Zunin, P.

    2005-12-01

    Full Text Available The chemical composition of monovarietal olive oils from the cultivar Colombaia was studied. Free acidity, peroxide value and UV absorbance attested to the good quality of the analyzed oils. Their fatty acid composition appeared to be quite different from the typical fatty acid profile of olive oils from Liguria but met the limits reported in the EC Regulations for olive oils. On the contrary, the amounts of Δ7-stigmastenol were often higher than the 0.5 % limit set by EC Regulations and total ß-sitosterol was below the minimum 93 % limit. The composition of polar compounds and of the volatile fraction was representative of the peculiar organoleptic character of these oils. Thus, the anomalous sterol composition of the monovarietal oils from the cultivar Colombaia calls for blending with other oils. Moreover, the use of these oils for the production of PDO oils “Riviera Ligure” must also be carefully controlled because it changes their nutritional and sensorial featuresEn este trabajo se ha estudiado la composición química de aceites de oliva mono-varietales de la variedad Colombaia. La acidez libre, el índice de peróxidos y la absorción UV confirmaron la buena calidad de los aceites analizados. Su composición en ácidos grasos resultó bastante diferente del perfil típico de ácidos grasos de los aceites de oliva virgen de la región de Liguria, pero se mantuvo dentro de los límites establecidos por los Reglamentos EC para aceites de oliva. Por otro lado, las cantidades de Δ7-estigmastenol resultaron normalmente superiores al 0.5 % del límite fijado por los Reglamentos EC y el ß-sitosterol total fue inferior al 93 % del límite mínimo. La composición en compuestos polares y de la fracción volátil confirmó las características organolépticas peculiares de estos aceites. Por tanto, la composición esterólica anómala de los aceites mono-varietales de la variedad Colombaia hace necesaria una mezcla con otros

  19. Chemical composition, carbohydrate digestibility, and antioxidant capacity of cooked black bean, chickpea, and lentil Mexican varieties

    National Research Council Canada - National Science Library

    Silva-Cristobal, L; Osorio-Díaz, P; Tovar, J; Bello-Pérez, L. A

    2010-01-01

    .... The cooked seeds of three Mexican pulses (black bean, chickpea, and lentil) were evaluated regarding their chemical composition, in vitro starch digestibility, polyphenols content and antioxidant capacity...

  20. Chemical composition of the circumstellar disk around AB Aurigae

    Science.gov (United States)

    Pacheco-Vázquez, S.; Fuente, A.; Agúndez, M.; Pinte, C.; Alonso-Albi, T.; Neri, R.; Cernicharo, J.; Goicoechea, J. R.; Berné, O.; Wiesenfeld, L.; Bachiller, R.; Lefloch, B.

    2015-06-01

    Aims: Our goal is to determine the molecular composition of the circumstellar disk around AB Aurigae (hereafter, AB Aur). AB Aur is a prototypical Herbig Ae star and the understanding of its disk chemistry is paramount for understanding the chemical evolution of the gas in warm disks. Methods: We used the IRAM 30-m telescope to perform a sensitive search for molecular lines in AB Aur as part of the IRAM Large program ASAI (a chemical survey of Sun-like star-forming regions). These data were complemented with interferometric observations of the HCO+ 1→0 and C17O 1→0 lines using the IRAM Plateau de Bure Interferometer (PdBI). Single-dish and interferometric data were used to constrain chemical models. Results: Throughout the survey, several lines of CO and its isotopologues, HCO+, H2CO, HCN, CN, and CS, were detected. In addition, we detected the SO 54→33 and 56→45 lines, confirming the previously tentative detection. Compared to other T Tauri and Herbig Ae disks, AB Aur presents low HCN 3→2/HCO+ 3→2 and CN 2→1/HCN 3→2 line intensity ratios, similar to other transition disks. AB Aur is the only protoplanetary disk detected in SO thus far, and its detection is consistent with interpretation of this disk being younger than those associated with T Tauri stars. Conclusions: We modeled the line profiles using a chemical model and a radiative transfer 3D code. Our model assumes a flared disk in hydrostatic equilibrium. The best agreement with observations was obtained for a disk with a mass of 0.01 M⊙, Rin = 110 AU, Rout = 550 AU, a surface density radial index of 1.5, and an inclination of 27°. The intensities and line profiles were reproduced within a factor of ˜2 for most lines. This agreement is reasonable considering the simplicity of our model that neglects any structure within the disk. However, the HCN 3→2 and CN 2→1 line intensities were predicted to be more intense by a factor of >10. We discuss several scenarios to explain this

  1. Quantification of aerosol chemical composition using continuous single particle measurements

    Science.gov (United States)

    Jeong, C.-H.; McGuire, M. L.; Godri, K. J.; Slowik, J. G.; Rehbein, P. J. G.; Evans, G. J.

    2011-07-01

    Mass concentrations of sulphate, nitrate, ammonium, organic carbon (OC), elemental carbon (EC) were determined from real time single particle data in the size range 0.1-3.0 μm measured by an Aerosol Time-of-Flight Mass Spectrometer (ATOFMS) at urban and rural sites in Canada. To quantify chemical species within individual particles measured by an ATOFMS, ion peak intensity of m/z -97 for sulphate, -62 for nitrate, +18 for ammonium, +43 for OC, and +36 for EC were scaled using the number and size distribution data by an Aerodynamic Particle Sizer (APS) and a Fast Mobility Particle Sizer (FMPS). Hourly quantified chemical species from ATOFMS single-particle analysis were compared with collocated fine particulate matter (aerodynamic diameter PM2.5) chemical composition measurements by an Aerosol Mass Spectrometer (AMS) at a rural site, a Gas-Particle Ion Chromatograph (GPIC) at an urban site, and a Sunset Lab field OCEC analyzer at both sites. The highest correlation was found for nitrate, with correlation coefficients (Pearson r) of 0.89 (ATOFMS vs. GPIC) and 0.85 (ATOFMS vs. AMS). ATOFMS mass calibration factors, determined for the urban site, were used to calculate mass concentrations of the major PM2.5 chemical components at the rural site near the US border in southern Ontario. Mass reconstruction using the ATOFMS mass calibration factors agreed very well with the PM2.5 mass concentrations measured by a Tapered Element Oscillating Microbalance (TEOM, r = 0.86) at the urban site and a light scattering monitor (DustTrak, r = 0.87) at the rural site. In the urban area nitrate was the largest contributor to PM2.5 mass in the winter, while organics and sulphate contributed ~64 % of the summer PM2.5 in the rural area, suggesting a strong influence of regional/trans-boundary pollution. The mass concentrations of five major species in ten size-resolved particle-types and aerosol acidity of each particle-type were determined for the rural site. On a mass basis sulphate

  2. The Relationship of Culture Media Composition and Chemical Composition on Spirulina sp for Metal Ion Adsorbent

    Directory of Open Access Journals (Sweden)

    Hilda Zulkifli

    2016-12-01

    Full Text Available The analysis relationship of Spirulina sp medium with chemical composition has been conducted. Chemical analysis was performed using X-Ray Fluorescence analysis. Furthermore, potention of Spirulina sp as adsorbent of metal ions was analyzed using FTIR spectroscopy. The results showed that metals such as Zn, Fe, Mn, Ca, Cu, and Mo were mainly metals in Spirulina sp. These metals were not correlated with cultivated medium of Spirulina sp. Analysis of potention Spirulina sp as metal ions adsorbent showed that Spirulina sp has functional groups –C=O and –OH as ligand. Intercation of metal ions Cu(II and Cr(III with Spirulina sp indicated that metal ions bond to –C=O functional group.

  3. Chemical composition and antioxidant activities of Broussonetia papyrifera fruits.

    Directory of Open Access Journals (Sweden)

    Jie Sun

    Full Text Available Fruits of Broussonetia papyrifera from South China were analyzed for their total chemical composition, and antioxidant activities in ethanol and aqueous extracts. In the fruit of this plant, the crude protein, crude fat and carbohydrates was 7.08%, 3.72% and 64.73% of dry weight, respectively. The crude protein, crude fat and carbohydrates were 15.71%, 20.51% and 36.09% of dry weight, respectively. Fatty acid and amino acid composition of the fruit were analyzed. Unsaturated fatty acid concentration was 70.6% of the total fatty acids. The percentage of the essential amino acids (EAAs was 40.60% of the total amino acids. Furthermore, B. papyrifera fruit are rich in many mineral elements and vitamins. Total phenolic content was assessed using the Folin-Ciocalteau assay, whereas antioxidant activities were assessed by measuring the ability of the two extracts to scavenge DPPH radicals, inhibit peroxidation, and chelate ferric ions. Their reducing power was also assessed. Results indicated that the aqueous extract of B. papyrifera was a more potent reducing agent and radical-scavenger than the ethanol extract. GC-MS analysis of the ethanol extract showed the presence of some acid-containing compounds. The changes in total phenolic content and antioxidant capacity in B. papyrifera from four different regions grown under normal conditions were assessed. The antioxidant activity of different extracts was positively associated with their total phenolic content. These results suggest that the fruit of B. papyrifera could be used in dietary supplement preparations, or as a food additive, for nutritional gain, or to prevent oxidation in food products.

  4. Chemical Composition of Urban Street Sediments and Its Sources

    Institute of Scientific and Technical Information of China (English)

    Cen Kuang; Hou Min; Thomas Neumann; Stefan Norra; Doris Stüben

    2004-01-01

    The distribution and the concentrations of various chemical elements in street sediments were investigated along a rural-urban boundary in Beijing, China. The statistical factor analysis of the data concerned identifies two anthropogenic sources responsible for the contamination of Beijing air. The first source is a steel factory in the western part of Beijing. From this source, Mn, Fe and Ti were emitted into the atmosphere through chimneys and by wind from coal heaps used as the primary energy source for the factory. The second source is a combination of traffic, domestic heating and some small factories in the center of Beijing urban area discharging Cu, Pb, Zn and Sn. Grain-size analyses show that most of the metals in the road dust have higher concentrations in the small grain-size fraction <0.125 mm, which is the severest case because these small particles with larger specific surface area and high heavy metal contents fly up easily and float in the air for a long time. Besides the anthropogenic contamination, such elements as Y, Zr, Nb, Ce and Rb are derived mainly both from natural soils and from the deserts. This is supported by mineral-phase analysis, which shows a clear imprint of materials in road dusts coming from the west China deserts. Our results clearly show that the chemical compositions of the urban road dusts can be used to identify distinctive sources responsible for the contamination mentioned above. The study shows that the chemistry of road dusts is an important monitor to assess the contamination in the urban environment.

  5. Evaluation of the performance of four chemical transport models in predicting the aerosol chemical composition in Europe in 2005

    NARCIS (Netherlands)

    Prank, M.; Sofiev, M.; Tsyro, S.; Hendriks, C.; Semeena, V.; Francis, X.V.; Butler, T.; Gon, H.D. van der; Friedrich, R.; Hendricks, J.; Kong, X.; Lawrence, M.; Righi, M.; Samaras, Z.; Sausen, R.; Kukkonen, J.; Sokhi, R.

    2016-01-01

    Four regional chemistry transport models were applied to simulate the concentration and composition of particulate matter (PM) in Europe for 2005 with horizontal resolution 20 km. The modelled concentrations were compared with the measurements of PM chemical composition by the European Monitoring

  6. Soursop (Annona muricata) vinegar production and its chemical compositions

    Science.gov (United States)

    Ho, Chin Wai; Lazim, Azwan Mat; Fazry, Shazrul; Zaki, Umi Kalsum Hj Hussain; Lim, Seng Joe

    2016-11-01

    Vinegar is a liquid product that undergoes double fermentations, which are alcoholic and acetous fermentation. Sugar source was converted to ethanol in alcoholic fermentation, meanwhile ethanol was oxidised to acetic acid during acetous fermentation. Soursop (Annona muricata) was the starting material in this study, as it is easily available in Malaysia. Its highly aromatic, juicy and distinctive flavours enables the production of high quality vinegar. The objective of this research is to produce good quality soursop vinegar as an innovative method to preserve and utilise the soursop fruit in Malaysia and to determine its chemical compositions. It was found that the sugar content reduces over time, and it is inversely proportional to the ethanol concentration, due to the production of ethanol from sugar. Acetic acid was also found to increase with increasing fermentation time. pH showed no significant difference (p>0.05) in the reduction of sugar and the production of ethanol. However, significantly higher (p 0.05) in Vitamin C contents in all soursop vinegar samples produced using different treatments.

  7. Pereskia aculeata Muller (Cactaceae Leaves: Chemical Composition and Biological Activities

    Directory of Open Access Journals (Sweden)

    Lucèia Fàtima Souza

    2016-09-01

    Full Text Available The aims of this work were to study the chemical composition of the essential oil from the leaves of Pereskia aculeata and to evaluate some biological activities of three leaf extracts. The phenolic content, antioxidant activity, and in vitro antimicrobial and antifungal activities were determined. The methanol extract showed antioxidant activity (EC50 7.09 mg/mL and high polyphenols content (15.04 ± 0.31 mg gallic acid equivalents (GAE/g. The petroleum ether extract exhibited potent antibacterial activity against Escherichia coli, whereas the chloroform extract showed inhibitory activity against Bacillus cereus and Staphylococcus aureus. The petroleum ether and methanol extracts were more effective in inhibiting the growth of Aspergillus versicolor. The possible cytotoxicity of extracts on neuroblastoma SH-SY5Y cancer cell line and the influence on adenylate cyclase (ADCY expression was also studied. P. aculeata chloroform extract showed antiproliferative activity with an IC50 value of 262.83 µg/mL. Treatments of SH-SY5Y neuroblastoma cells with 100 µg/mL of methanol extract significantly reduced ADCY1 expression.

  8. Chemical compositions of two different Thymus species essential oils

    Directory of Open Access Journals (Sweden)

    Samira Jaberi

    2015-06-01

    Full Text Available Thymus is one of the most important members of Lamiaceae family. Aerial parts of the plant have been widely used in medicine. It has been reported that most of these effects are related to phenolic compounds especially thymol and carvacrol in Thymus essential oil. In this study, aerial parts of Thymus daenensis and Thymus lancifolius were collected from Kohgiluyeh and Boyer-Ahmad, Iran. Essential oils of aerial parts of these plants were gained by the hydrodistillation method and the chemical compositions were analyzed by gas chromatography/ Mass spectrometry (GC/MS. The major components of the essential oil of T. daenensis were thymol (39.91%, carvacrol (29.93%, linalool (5.55%, caryophyllene (3.5% and geraniol (3.09%, whereas the major components of the essential oil of T. lancifolius were: carvacrol (25.55%, thymol (20.79%, linalool (16.8%, α-terpineol (6.34%, borneol (4.00%, caryophyllene (3.98%, p-cymene (3.38% and cis-linalool oxide (3.21%. Linalool was reported as another major component in T. lancifolius

  9. Chemical composition and quality of sweet sorghum and maize silages

    Directory of Open Access Journals (Sweden)

    Zbigniew PODKÓWKA

    2011-10-01

    Full Text Available Sweet sorghum (Sorghum saccharatum silage, maize (Zea mays silage, and sorghum and maize (1:1 silage were investigated. The silages were analysed for chemical composition, quality and aerobic stability. Dry matter was the lowest (20.88% in sorghum silage and the highest (37.45% in maize silage. In sorghum silage, the concentration of crude ash and crude fibre was higher, and that of crude protein, crude fat and N-free extractives lower compared to maize silage. Neutral detergent fibre and acid detergent fibre were the highest in sorghum silage and the lowest in maize silage. The silages were dominated by lactic acid, with trace amounts of butyric acid. Maize silage was higher lactic acid and higher total acids than others. All silages were of very good quality according to Flieg-Zimmer scale. Silage pH ranged from 4.20 to 4.31. Sorghum silage was characterized by higher aerobic stability (81h compared to the other silages from maize (74h and sorghum and maize 1:1 (69h.

  10. Reducing chemical vapour infiltration time for ceramic matrix composites.

    Science.gov (United States)

    Timms, L. A.; Westby, W.; Prentice, C.; Jaglin, D.; Shatwell, R. A.; Binner, J. G. P.

    2001-02-01

    Conventional routes to producing ceramic matrix composites (CMCs) require the use of high temperatures to sinter the individual ceramic particles of the matrix together. Sintering temperatures are typically much higher than the upper temperature limits of the fibres. This paper details preliminary work carried out on producing a CMC via chemical vapour infiltration (CVI), a process that involves lower processing temperatures, thus avoiding fibre degradation. The CVI process has been modified and supplemented in an attempt to reduce the CVI process time and to lower the cost of this typically expensive process. To this end microwave-enhanced CVI (MECVI) has been chosen, along with two alternative pre-infiltration steps: electrophoretic infiltration and vacuum bagging. The system under investigation is based on silicon carbide fibres within a silicon carbide matrix (SiCf/SiC). The results demonstrate that both approaches result in an enhanced initial density and a consequent significant reduction in the time required for the MECVI processing step. Dual energy X-ray absorptiometry was used as a non-destructive, density evaluation technique. Initial results indicate that the presence of the SiC powder in the pre-form changes the deposition profile during the MECVI process.

  11. Porosity prediction of calcium phosphate cements based on chemical composition.

    Science.gov (United States)

    Öhman, Caroline; Unosson, Johanna; Carlsson, Elin; Ginebra, Maria Pau; Persson, Cecilia; Engqvist, Håkan

    2015-07-01

    The porosity of calcium phosphate cements has an impact on several important parameters, such as strength, resorbability and bioactivity. A model to predict the porosity for biomedical cements would hence be a useful tool. At the moment such a model only exists for Portland cements. The aim of this study was to develop and validate a first porosity prediction model for calcium phosphate cements. On the basis of chemical reaction, molar weight and density of components, a volume-based model was developed and validated using calcium phosphate cement as model material. 60 mol% β-tricalcium phosphate and 40 mol% monocalcium phosphate monohydrate were mixed with deionized water, at different liquid-to-powder ratios. Samples were set for 24 h at 37°C and 100% relative humidity. Thereafter, samples were dried either under vacuum at room temperature for 24 h or in air at 37 °C for 7 days. Porosity and phase composition were determined. It was found that the two drying protocols led to the formation of brushite and monetite, respectively. The model was found to predict well the experimental values and also data reported in the literature for apatite cements, as deduced from the small absolute average residual errors (brushite, monetite and apatite cements. The model gives a good estimate of the final porosity and has the potential to be used as a porosity prediction tool in the biomedical cement field.

  12. Chemical composition of biomass from tall perennial tropical grasses

    Energy Technology Data Exchange (ETDEWEB)

    Prine, G.M. [Univ. of Florida, Gainesville, FL (United States); Stricker, J.A. [Polk County Extension Office, Bartow, FL (United States); Anderson, D.L. [Everglades Research and Education Center, Belle Glade, FL (United States)] [and others

    1995-11-01

    The tall perennial tropical grasses, elephantgrass (Pennisetum purpureum Schum.), sugarcane and energycane (Saccharum sp.) and erianthus (Erianthus arundenaceum (Retz) Jesw.) have given very high oven dry biomass yields in Florida and the warm Lower South USA. No good complete analyses of the chemical composition of these grasses for planning potential energy use was available. We sampled treatments of several tall grass demonstrations and experiments containing high-biomass yielding genotypes of the above tall grass crops at several locations in Florida over the two growing seasons, 1992 and 1993. These samples were analyzed for crude protein, NDF, ADF, cellulose, hemicellulose, lignin, and IVDMD or IVOMD. The analysis for the above constituents are reported, along with biomass yields where available, for the tall grass accessions in the various demonstrations and experiments. Particular attention is given to values obtained from the high-yielding tall grasses grown on phosphatic clays in Polk County, FL, the area targeted by a NREL grant to help commercialize bioenergy use from these crops.

  13. Chemical composition and antibacterial activity of Gongronema latifolium

    Institute of Scientific and Technical Information of China (English)

    ELEYINMI Afolabi F.

    2007-01-01

    Chemical composition of Gongronema latifolium leaves was determined using standard methods. Aqueous and methanol G. latifolium extracts were tested against thirteen pathogenic bacterial isolates. Crude protein, lipid extract, ash, crude fibre and nitrogen free extractives obtained are: 27.2%, 6.07%, 11.6%, 10.8% and 44.3% dry matter respectively. Potassium,sodium, calcium, phosphorus and cobalt contents are 332, 110, 115, 125 and 116 mg/kg respectively. Dominant essential amino acids are leucine, valine and phenylalanine. Aspartic acid, glutamic acid and glycine are 13.8%, 11.9% and 10.3% respectively of total amino acid. Saturated and unsaturated fatty acids are 50.2% and 39.4% of the oil respectively. Palmitic acid makes up 36% of the total fatty acid. Extracts show no activity against E. faecalis, Y. enterolytica, E. aerogenes, B. cereus and E. agglomerans.Methanol extracts were active against S. enteritidis, S. cholerasius ser typhimurium and P. aeruginosa (minimum inhibitory concentration (MIC) 1 mg; zone of growth inhibition 7, 6.5 and 7 mm respectively). Aqueous extracts show activity against E. coli (MIC 5 mg) and P. aeruginosa (MIC 1 mg) while methanol extracts are active against P. aeruginosa and L. monocytogenes. G.latifolium has potential food and antibacterial uses.

  14. Tea tree oil: contact allergy and chemical composition.

    Science.gov (United States)

    de Groot, Anton C; Schmidt, Erich

    2016-09-01

    In this article, contact allergy to, and the chemical composition of, tea tree oil (TTO) are reviewed. This essential oil is a popular remedy for many skin diseases, and may be used as neat oil or be present in cosmetics, topical pharmaceuticals and household products. Of all essential oils, TTO has caused most (published) allergic reactions since the first cases were reported in 1991. In routine testing, prevalences of positive patch test reactions have ranged from 0.1% to 3.5%. Nearly 100 allergic patients have been described in case reports and case series. The major constituents of commercial TTO are terpinen-4-ol, γ-terpinene, 1,8-cineole, α-terpinene, α-terpineol, p-cymene, and α-pinene. Fresh TTO is a weak to moderate sensitizer, but oxidation increases its allergenic potency. The major sensitizers appear to be ascaridole, terpinolene, α-terpinene, 1,2,4-trihydroxymenthane, α-phellandrene, and limonene. The clinical picture of allergic contact dermatitis caused by TTO depends on the products used. Most reactions are caused by the application of pure oil; cosmetics are the culprits in a minority of cases. Patch testing may be performed with 5% oxidized TTO. Co-reactivity to turpentine oil is frequent, and there is an overrepresentation of reactions to fragrance mix I, Myroxylon pereirae, colophonium, and other essential oils.

  15. Chemical composition and antigenotoxic properties of Lippia alba essential oils

    Directory of Open Access Journals (Sweden)

    Molkary Andrea López

    2011-01-01

    Full Text Available The present work evaluated the chemical composition and the DNA protective effect of the essential oils (EOs from Lippia alba against bleomycin-induced genotoxicity. EO constituents were determined by Gas Chromatography/Mass Spectrometric (GC-MS analysis. The major compounds encountered being citral (33% geranial and 25% neral, geraniol (7% and trans-β-caryophyllene (7% for L. alba specimen COL512077, and carvone (38%, limonene (33% and bicyclosesquiphellandrene (8% for the other, COL512078. The genotoxicity and antigenotoxicity of EO and the compounds citral, carvone and limonene, were assayed using the SOS Chromotest in Escherichia coli. The EOs were not genotoxic in the SOS chromotest, but one of the major compound (limonene showed genotoxicity at doses between 97 and 1549 mM. Both EOs protected bacterial cells against bleomycin-induced genotoxicity. Antigenotoxicity in the two L. alba chemotypes was related to the major compounds, citral and carvone, respectively. The results were discussed in relation to the chemopreventive potential of L. alba EOs and its major compounds.

  16. Brazilian kefir: structure, microbial communities and chemical composition

    Directory of Open Access Journals (Sweden)

    Karina Teixeira Magalhães

    2011-06-01

    Full Text Available Microbial ecology and chemical composition of Brazilian kefir beverage was performed. The microorganisms associated with Brazilian kefir were investigated using a combination of phenotypic and genotypic methods. A total of 359 microbial isolates were identified. Lactic acid bacteria (60.5% were the major isolated group identified, followed by yeasts (30.6% and acetic acid bacteria (8.9%. Lactobacillus paracasei (89 isolates, Lactobacillus parabuchneri (41 isolates, Lactobacillus casei (32 isolates, Lactobacillus kefiri (31 isolates, Lactococcus lactis (24 isolates, Acetobacter lovaniensis (32 isolates, Kluyveromyces lactis (31 isolates, Kazachstania aerobia (23 isolates, Saccharomyces cerevisiae (41 isolates and Lachancea meyersii (15 isolates were the microbial species isolated. Scanning electron microscopy showed that the microbiota was dominated by bacilli (short and curved long cells growing in close association with lemon-shaped yeasts cells. During the 24 h of fermentation, the protein content increased, while lactose and fat content decreased. The concentration of lactic acid ranged from 1.4 to 17.4 mg/ml, and that of acetic acid increased from 2.1 to 2.73 mg/ml. The production of ethanol was limited, reaching a final mean value of 0.5 mg/ml.

  17. Pereskia aculeata Muller (Cactaceae) Leaves: Chemical Composition and Biological Activities.

    Science.gov (United States)

    Souza, Lucèia Fàtima; Caputo, Lucia; Inchausti De Barros, Ingrid Bergman; Fratianni, Florinda; Nazzaro, Filomena; De Feo, Vincenzo

    2016-09-03

    The aims of this work were to study the chemical composition of the essential oil from the leaves of Pereskia aculeata and to evaluate some biological activities of three leaf extracts. The phenolic content, antioxidant activity, and in vitro antimicrobial and antifungal activities were determined. The methanol extract showed antioxidant activity (EC50 7.09 mg/mL) and high polyphenols content (15.04 ± 0.31 mg gallic acid equivalents (GAE)/g). The petroleum ether extract exhibited potent antibacterial activity against Escherichia coli, whereas the chloroform extract showed inhibitory activity against Bacillus cereus and Staphylococcus aureus. The petroleum ether and methanol extracts were more effective in inhibiting the growth of Aspergillus versicolor. The possible cytotoxicity of extracts on neuroblastoma SH-SY5Y cancer cell line and the influence on adenylate cyclase (ADCY) expression was also studied. P. aculeata chloroform extract showed antiproliferative activity with an IC50 value of 262.83 µg/mL. Treatments of SH-SY5Y neuroblastoma cells with 100 µg/mL of methanol extract significantly reduced ADCY1 expression.

  18. Anisotropy vs chemical composition at ultra-high energies

    CERN Document Server

    Lemoine, Martin

    2009-01-01

    This paper proposes and discusses a test of the chemical composition of ultra-high energy cosmic rays that relies on the anisotropy patterns measured as a function of energy. In particular, we show that if one records an anisotropy signal produced by heavy nuclei of charge Z above an energy E_{thr}, one should record an even stronger (possibly much stronger) anisotropy at energies >E_{thr}/Z due to the proton component that is expected to be associated with the sources of the heavy nuclei. This conclusion remains robust with respect to the parameters characterizing the sources and it does not depend at all on the modelling of astrophysical magnetic fields. As a concrete example, we apply this test to the most recent data of the Pierre Auger Observatory. Assuming that the anisotropy reported above 55EeV is not a statistical accident, and that no significant anisotropy has been observed at energies 10^{45}Z^{-2}erg/s. Using this bound in conjunction with the above conclusions, we argue that the current PAO data...

  19. Brazilian kefir: structure, microbial communities and chemical composition

    Science.gov (United States)

    Magalhães, Karina Teixeira; de Melo Pereira, Gilberto Vinícius; Campos, Cássia Roberta; Dragone, Giuliano; Schwan, Rosane Freitas

    2011-01-01

    Microbial ecology and chemical composition of Brazilian kefir beverage was performed. The microorganisms associated with Brazilian kefir were investigated using a combination of phenotypic and genotypic methods. A total of 359 microbial isolates were identified. Lactic acid bacteria (60.5%) were the major isolated group identified, followed by yeasts (30.6%) and acetic acid bacteria (8.9%). Lactobacillus paracasei (89 isolates), Lactobacillus parabuchneri (41 isolates), Lactobacillus casei (32 isolates), Lactobacillus kefiri (31 isolates), Lactococcus lactis (24 isolates), Acetobacter lovaniensis (32 isolates), Kluyveromyces lactis (31 isolates), Kazachstania aerobia (23 isolates), Saccharomyces cerevisiae (41 isolates) and Lachancea meyersii (15 isolates) were the microbial species isolated. Scanning electron microscopy showed that the microbiota was dominated by bacilli (short and curved long) cells growing in close association with lemon-shaped yeasts cells. During the 24 h of fermentation, the protein content increased, while lactose and fat content decreased. The concentration of lactic acid ranged from 1.4 to 17.4 mg/ml, and that of acetic acid increased from 2.1 to 2.73 mg/ml. The production of ethanol was limited, reaching a final mean value of 0.5 mg/ml. PMID:24031681

  20. Study of Aerosol Chemical Composition Based on Aerosol Optical Properties

    Science.gov (United States)

    Berry, Austin; Aryal, Rudra

    2015-03-01

    We investigated the variation of aerosol absorption optical properties obtained from the CIMEL Sun-Photometer measurements over three years (2012-2014) at three AERONET sites GSFC; MD Science_Center and Tudor Hill, Bermuda. These sites were chosen based on the availability of data and locations that can receive different types of aerosols from land and ocean. These absorption properties, mainly the aerosol absorption angstrom exponent, were analyzed to examine the corresponding aerosol chemical composition. We observed that the retrieved absorption angstrom exponents over the two sites, GSFC and MD Science Center, are near 1 (the theoretical value for black carbon) and with low single scattering albedo values during summer seasons indicating presence of black carbon. Strong variability of aerosol absorption properties were observed over Tudor Hill and will be analyzed based on the air mass embedded from ocean side and land side. We will also present the seasonal variability of these properties based on long-range air mass sources at these three sites. Brent Holben, NASA GSFC, AERONET, Jon Rodriguez.

  1. Chemical Composition, Antifungal and Insecticidal Activities of Hedychium Essential Oils

    Directory of Open Access Journals (Sweden)

    Kanniah Rajasekaran

    2013-04-01

    Full Text Available The antimicrobial properties of essential oils have been documented, and their use as “biocides” is gaining popularity. The aims of this study were to analyze the chemical composition and assess the biological activities of Hedychium essential oils. Oils from 19 Hedychium species and cultivars were analyzed by gas chromatography (GC and gas chromatography-mass spectrometry (GC-MS techniques. The antifungal and insecticidal activities of these oils were tested against Colletotrichum acutatum, C. fragariae, and C. gloeosporioides, and three insects, the azalea lace bug (Stephanitis pyrioides, the yellow fever mosquito (Aedes aegypti, and the red imported fire ant (Solenopsis invicta. Hedychium oils were rich in monoterpenes and sesquiterpenes, especially 1,8-cineole (0.1%–42%, linalool (<0.1%–56%, a-pinene (3%–17%, b-pinene (4%–31%, and (E-nerolidol (0.1%–20%. Hedychium oils had no antifungal effect on C. gloeosporioides, C. fragariae, and C. acutatum, but most Hedychium oils effectively killed azalea lace bugs. The oils also show promise as an adult mosquito repellent, but they would make rather poor larvicides or adulticides for mosquito control. Hedychium oils acted either as a fire ant repellent or attractant, depending on plant genotype and oil concentration.

  2. Chemical compositions of precipitation and scavenging of particles in Beijing

    Institute of Scientific and Technical Information of China (English)

    HU Min; ZHANG Jing; WU Zhijun

    2005-01-01

    Totally 23 precipitation samples were collected in Beijing from May to November in 2003. In order to investigate the chemical composition of precipitation samples, pH, conductivity, concentrations of water-soluble ions and organic acids were analyzed. The average pH of precipitations is 6.18, belonging to the neutral range; the average conductivity is 52.23 (S/cm, which indicates that precipitations in Beijing are obviously polluted; are the most abundant anions with the average concentrations of 521 and 174 μeq·L-1, respectively; the average equivalent ratio is 3.1, which decreases by about 15% compared with the result of 1994; and Ca2+ are the most abundant cations with the average concentrations of 376 and 397 μeq·L-1, respectively; formic acid, acetic acid and oxalic acid are the main organic acids with the average concentrations of 4.62, 4.60 and 1.17 μeq·L-1, respectively, accounting for 2% of the overall anions. Obvious differences between concentrations before and after precipitation are also observed by SJAC (Steam Jet Aerosol Collector), which shows the removal of particles from the atmosphere by precipitation.

  3. Microbial population, chemical composition and silage fermentation of cassava residues.

    Science.gov (United States)

    Napasirth, Viengsakoun; Napasirth, Pattaya; Sulinthone, Tue; Phommachanh, Kham; Cai, Yimin

    2015-09-01

    In order to effectively use the cassava (Manihot esculenta Crantz) residues, including cassava leaves, peel and pulp for livestock diets, the chemical and microbiological composition, silage preparation and the effects of lactic acid bacteria (LAB) inoculants on silage fermentation of cassava residues were studied. These residues contained 10(4) to 10(5) LAB and yeasts, 10(3) to 10(4) coliform bacteria and 10(4) aerobic bacteria in colony forming units (cfu) on a fresh matter (FM) basis. The molds were consistently at or below the detectable level (10(2) cfu of FM) in three kinds of cassava residues. Dry matter (DM), crude protein (CP) and neutral detergent fiber (NDF) content of cassava residues were 17.50-30.95%, 1.30-16.41% and 25.40-52.90% on a DM basis, respectively. The silage treatments were designed as control silage without additive (CO) or with LAB inoculants Chikuso-1 (CH, Lactobacillus plantarum) and Snow Lacto (SN, Lactobacillus rhamnosus) at a rate of 5 mg/kg of FM basis. All silages were well preserved with a low pH (below 4.0) value and when cassava residues silage treated with inoculants CH and SN improved fermentation quality with a lower pH, butyric acid and higher lactic acid than control silage.

  4. Chemical composition and antigenotoxic properties of Lippia alba essential oils.

    Science.gov (United States)

    López, Molkary Andrea; Stashenko, Elena E; Fuentes, Jorge Luis

    2011-07-01

    The present work evaluated the chemical composition and the DNA protective effect of the essential oils (EOs) from Lippia alba against bleomycin-induced genotoxicity. EO constituents were determined by Gas Chromatography/Mass Spectrometric (GC-MS) analysis. The major compounds encountered being citral (33% geranial and 25% neral), geraniol (7%) and trans-β-caryophyllene (7%) for L. alba specimen COL512077, and carvone (38%), limonene (33%) and bicyclosesquiphellandrene (8%) for the other, COL512078. The genotoxicity and antigenotoxicity of EO and the compounds citral, carvone and limonene, were assayed using the SOS Chromotest in Escherichia coli. The EOs were not genotoxic in the SOS chromotest, but one of the major compound (limonene) showed genotoxicity at doses between 97 and 1549 mM. Both EOs protected bacterial cells against bleomycin-induced genotoxicity. Antigenotoxicity in the two L. alba chemotypes was related to the major compounds, citral and carvone, respectively. The results were discussed in relation to the chemopreventive potential of L. alba EOs and its major compounds.

  5. Technical note: The effect of vertical turbulent mixing on gross O2 production assessments by the triple isotopic composition of dissolved O2

    Directory of Open Access Journals (Sweden)

    E. Wurgaft

    2013-08-01

    Full Text Available The 17O-excess (17Δ of dissolved O2 has been used, for over a decade, to estimate gross O2 production (G17OP rates in the mixed layer (ML in many regions of the ocean. This estimate relies on a steady-state balance of O2 fluxes, which include air-sea gas exchange, photosynthesis and respiration but notably, not turbulent mixing with O2 from the thermocline. In light of recent publications, which showed that neglecting the turbulent flux may lead to inaccurate G17OP estimations, we present a simple correction for the effect of turbulent flux of O2 from the thermocline on ML G17OP. The correction is based on a turbulent-flux term between the thermocline and the ML, and use the difference between the ML 17Δ and that of a single data-point below the ML base. Using a numerical model and measured data we compared turbulence-corrected G17OP rates to those calculated without it. The corrected G17OP rates were 10–90% lower than the uncorrected rates, which implies that a large fraction of the photosynthetic O2 in the ML is actually produced in the thermocline.

  6. Optical density and chemical composition of microfilled and microhybrid composite resins

    Directory of Open Access Journals (Sweden)

    Ana Paula Braun

    2008-04-01

    Full Text Available This study evaluated the optical density of two microfilled and two microhybrid resins, as well as the composition of these materials with regard to their optical density. Cavities prepared in 12 2-mm- or 4-mm-thick acrylic plastic plates were filled with Z250 (3M-ESPE, A110 (3M-ESPE, Charisma (Heraeus-Kulzer and DurafillVS (Heraeus-Kulzer. The resin increments (2-mm-thick were light-cured for 40 s. Three 0.12-s radiographic exposures were made of each #2 acrylic plastic plate. DenOptix system optical plates were used to obtain the digital images. Three readings of the composite resin surface were made in each radiograph, totalizing 216 readings. The mean of highest and lowest grey-scale values was obtained. Two specimens of each composite resin were prepared for SEM analysis of the chemical elements related to optical density, using energy dispersive x-ray analysis (EDX. The results were subjected to Shapiro-Wilk's test, ANOVA, Tukey's test at 1% level of significance and Pearson's correlation. The mean grey-scale values at 2 mm and 4 mm were: Z250 = 154.27a and 185.33w; A110 = 46.77b and 63.05y; Charisma = 163.40c and 200.46z; DurafillVS = 43.92b and 58.99x, respectively. Pearson's test did not show any positive correlation between optical density and percentage weight of optical density chemical elements. It was concluded that the microhybrid resins had higher optical density means than the microfilled resins; among the evaluated resins, Charisma had the highest optical density means.

  7. Gross chemical profile and calculation of nitrogen-to-protein conversion factors for nine species of fishes from coastal waters of Brazil

    Directory of Open Access Journals (Sweden)

    Graciela S Diniz

    2013-04-01

    Full Text Available The amino acid composition and contents of nitrogen, phosphorus, lipid, carbohydrate and protein were determined in muscles of Dactylopterus volitans, Genypterus brasiliensis, Mullus argentinae, Paralichthys patagonicus, Percophis brasiliensis, Pinguipes brasilianus, Rhizoprionodon lalandii, Rhizoprionodon porosus, and Urophycis cirrata. The samples showed low carbohydrate content (66% dry weight in all species. The percentage of total lipid varied widely among species, andM. argentinae showed the highest concentrations (16%. The percentage of nitrogen and phosphorus was high and similar among species, with overall average values of 13.3% and 1.2%, respectively. The amino acids composition was similar among the animals, with glutamic acid and lisine as the most abundant amino acid and histidine in low concentrations. Among species, the content of proteinaceous nitrogen was high, with an average of 96.8% of the total nitrogen. From data of total amino acid and total nitrogen, specific nitrogen-to-protein conversion factors were calculated for each species. The nitrogen-to-protein conversion factors ranged from 5.39 to 5.98, with an overall average of 5.71. These findings showed that the traditional conversion factor of 6.25 overestimates the actual protein content and should be avoided.

  8. Seminar for hydrocarbon detection with composite geophysical/geo-chemical techniques

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    “Seminar for hydrocarbon detection with composite geophy sical/geo-chemical techniques”,jointly organized by China petroleum Exploration & Production Company and Exploration Geophysical Committee of CGS and supported by the Composite Geophysical/geo-chemical Departement of Oriental Geophysical Company and China Exploration&Development Research Instiute,

  9. Chemical composition analysis of simulated waste glass T10-G-16A

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-08-01

    In this report, SRNL provides chemical composition analyses of a simulated LAW glass designated T10-G-16A.The measured chemical composition data are reported and compared with the targeted values for each component. No issues were identified in reviewing the analytical data.

  10. RESEARCH REGARDING THE CHEMICAL COMPOSITION AT VINEGAR TYPES

    OpenAIRE

    Liviu Giurgiulescu; Olimpia Mihaela Hoban

    2009-01-01

    In this article are presented some physico-chemical applied vinegar, to see some chemical properties of vinegar suchas total acidity, volatile and fixed, by colorimetric determination of iron content in the vinegar, the extract andresidue determination dry.

  11. Brazilian Propolis: Correlation between Chemical Composition and Antimicrobial Activity

    Directory of Open Access Journals (Sweden)

    Kelly Salomão

    2008-01-01

    Full Text Available The chemical composition of ethanol extracts from samples of Brazilian propolis (EEPs determined by HPLC and their activity against Trypanosoma cruzi, Staphylococcus aureus, Streptococcus pneumoniae, Klebisiella pneumoniae, Candida albicans, Sporothrix schenckii and Paracoccidioides brasiliensis were determined. Based on the predominant botanical origin in the region of samples' collection, the 10 extracts were separated into three groups: A (B. dracunculifolia + Auraucaria spp, B (B. dracunculifolia and C (Araucaria spp. Analysis by the multiple regression of all the extracts together showed a positive correlation, higher concentrations leading to higher biological effect, of S. aureus with p-coumaric acid (PCUM and 3-(4-hydroxy-3-(oxo-butenyl-phenylacrylic acid (DHCA1 and of trypomastigotes of T. cruzi with 3,5-diprenyl-4-hydroxycinnamic acid derivative 4 (DHCA4 and 2,2-dimethyl-6-carboxyethenyl-2H-1-benzopyran (DCBEN. When the same approach was employed for each group, due to the small number of observations, the statistical test gave unreliable results. However, an overall analysis revealed for group A an association of S. aureus with caffeic acid (CAF and dicaffeoylquinic acid 3 (CAFQ3, of S. pneumoniae with CAFQ3 and monocaffeoylquinic acid 2 (CAFQ2 and of T. cruzi also with CAFQ3. For group B, a higher activity against S. pneumoniae was associated DCBEN and for T. cruzi with CAF. For group C no association was observed between the anitmicrobial effect and any component of the extracts. The present study reinforces the relevance of PCUM and derivatives, especially prenylated ones and also of caffeolyquinic acids, on the biological activity of Brazilian propolis.

  12. Chemical composition and leishmanicidal activity of Pulicaria gnaphalodes essential oil

    Directory of Open Access Journals (Sweden)

    G. Asghari

    2014-10-01

    Full Text Available Background and objectives: Several natural compounds have been identified for the treatment ofleishmaniasis. Due to a few safe drugs and the side effects caused by available chemotherapy, some new drugs for treatment of leishmaniasis are requested.  The genus Pulicaria (Asteraceae is represented in the flora of Iran by five species. Phytochemical studies on Pulicaria species have revealed some flavonoids and terpenoids with leishmanicidal activity. In the present investigation chemical composition and leishmanicidal activity of Pulicaria gnaphalodes essential oil have been studied. Methods: The essential oil of the aerial parts of the plant was obtained by Clevenger apparatus and was analyzed by GC/MS. Antileishmanil activity was assessed against promastigoes of Leishmania major. Results:The major components from P. gnaphalodes essential oil have been reported to be geraniol, 1,8-cineole, chrysanthenone, α-pinene, chrystanthenone, α-terpineol and filifolone. The alcohol monoterpenes with contribution of 25.04% constituted the major portion of the essential oil, while hydrocarbon monoterpenes and hydrocarbon sesquiterpenes with contribution of 7.08% and 2.38%, respectively occupied the next rates.In the present experiment the essential oil of P. gnaphalodes progressively inhibited Leishmania major growth in concentrations ranging from 0.125 to 50 µL/mL (parasite culture in 24 h. The essential oil at 50 µL/mL eliminated the promastigotes at the beginning of treatment. It showed antileishmanial activity in concentration of 1.06 µL/mL and destroyed all parasits in 24 h.  Conclusion: Pulicaria gnaphalodes antileishmanial activity, could suggest the species and constituents as possible lead structures for antileishmanial drug discovery.

  13. Chemical composition and antioxidant activity of berry fruits

    Directory of Open Access Journals (Sweden)

    Stajčić Slađana M.

    2012-01-01

    Full Text Available The main chemical composition, contents of total phenolic (TPh, total flavonoid (TF, and total monomeric anthocyianin (TMA, as well as the antioxidant activity of two raspberry cultivars (Meeker and Willamette, two blackberry cultivars (Čačanska bestrna and Thornfree and wild bilberry were studied. The raspberry cultivars had the highest total solids among fruits investigated. Bilberry fruits had the highest sugar-to-acid ratio. Blackberry fruits were richer in crude fibers (cellulose in comparison to raspberry and bilberry fruits. The content of pectic substances was highest in the bilberry. Also, bilberry had a highest content of TPh (808.12 mg GAE/100 g FW, TF (716.31 mg RE/100 g FW and TMA (447.83 mg CGE/100 g FW. The antioxidant activity was evaluated spectrophotometrically, using 2,2-diphenyl-1-picrylhydrazyl (DPPH radical scavenging activity assay. The DPPH free radical scavenging activity, expressed as the EC50 value (in mg of fresh weight of berry fruit per ml of the reaction mixture, of bilberry (0.3157 ± 0.0145 mg/ml was the highest. These results also showed that the antioxidant value of 100 g FW bilberry, raspberry - Willamette, raspberry - Meeker, blackberry - Čačanska bestrna and blackberry - Thornfree is equivalent to 576.50 mg, 282.74 mg, 191.58 mg, 222.28 mg and 272.01 mg of vitamin C, respectively. There was a significant positive correlation between the antioxidant activities and content of total phenolics (RTPh 2=0.9627, flavonoids (RTF 2=0.9598 and anthocyanins (RTMA 2=0.9496 in berry fruits. [Projekat Ministarstva nauke Republike Srbije, br. TR 31044

  14. Chemical composition of buckwheat plant parts and selected buckwheat products

    Directory of Open Access Journals (Sweden)

    Petra Vojtíšková

    2014-11-01

    Full Text Available Chemical composition plant parts (roots, stalks, leaves, blossoms of common buckwheat (Fagopyrum esculentum Moench and selected products made from its seeds (peels, whole seed, wholemeal flour, broken seeds, crunchy products Natural and Cocoa, flour, and pasta was determined. Samples were dried and ground to a fine powder. All analyses were performed according to the Commission Regulation no. 152/2009, while rutin concentration was determined by the modified HPLC method. The lowest content of moisture was found in roots (4.3% and in peels (almost 8% and the highest moisture (nearly 11% was discovered in seeds. The lowest amount of crude protein (3.5% was found in peels, the highest crude protein amount (>13% in both flours and leaves (23%. The starch content (>50% in dry matter differs from one sample to another. Only in peels the content of starch was about 3.5%. From all examined samples, the lowest content of fat was found in crunchy products Cocoa, 1.7%. The lowest amount of histidine was determined in all studied samples, except peels, the highest content of glutamic acid was determined in almost all samples, except peels. Whole-meal flour is very rich source of Ca and Fe. The content of these elements was 1172 mg.kg-1 and 45.9 mg.kg-1, respectively. On the other hand, the highest content of Pb (>1 mg.kg-1 was found in broken seeds. The greatest concentration of rutin was determined in blossoms and leaves (83.6 and 69.9 mg.g-1, respectively. On the other hand, the lowest concentrations of rutin were found in buckwheat products (generally less then 1 mg.g-1, i.e. in wholemeal flour, 702 μg.kg-1, the lowest almost 10 μg.kg-1 in pasta.

  15. Vegetation change impacts on soil organic carbon chemical composition in subtropical forests

    Science.gov (United States)

    Guo, Xiaoping; Meng, Miaojing; Zhang, Jinchi; Chen, Han Y. H.

    2016-07-01

    Changes in the chemical composition of soil organic carbon (SOC) might strongly affect the global carbon cycle as it controls the SOC decomposition rate. Vegetation change associated with long-term land use changes is known to strongly impact the chemical composition of SOC; however, data on the impacts of vegetation change following disturbance events of short durations and succession that occur frequently in forest ecosystems via diverse management objectives on SOC chemical composition are negligible. Here we examined the impacts of vegetation changes on the chemical composition of SOC by sampling soils of native broad-leaved forests, planted mixed broad-leaved and coniferous forests, and tea gardens in eastern China. We used nuclear magnetic resonance spectroscopy to quantify SOC chemical composition. We found that among all components of SOC chemical composition, alkyl carbon (C) and aryl C were more liable to change with vegetation than other SOC components. Soil pH was negatively correlated to the relative abundances of alkyl C and N-alkyl C, and Shannon’s index of overstory plant species was positively correlated to the relative abundances of phenolic C and aromaticity. Our results suggest that vegetation changes following short disturbance events and succession may strongly alter SOC chemical composition in forest ecosystems.

  16. Mineral and inorganic chemical composition of the Pernik coal, Bulgaria

    Energy Technology Data Exchange (ETDEWEB)

    Yossifova, Mariana G. [Geological Institute, Acad. G. Bonchev Str., Bl.24, Bulgarian Academy of Sciences, 1113 Sofia (Bulgaria)

    2007-11-22

    The mineral and inorganic chemical composition of five types of samples from the Pernik subbituminous coals and their products generated from the Pernik preparation plant were studied. They include feed coal, low-grade coal, high-grade coal, coal slime, and host rock. The mineral matter of the coals contains 44 species that belong mainly to silicates, carbonates, sulphates, sulphides, and oxides/hydroxides, and to a lesser extent, chlorides, biogenic minerals, and organic minerals. The detrital minerals are quartz, kaolinite, micas, feldspars, magnetite, cristobalite, spessartine, and amphibole. The authigenic minerals include various sulphides, silicates, oxihydroxides, sulphates, and carbonates. Several stages and substages of formation were identified during the syngenetic and epigenetic mineral precipitations of these coals. The authigenic minerals show the greatest diversity of mineral species as the epigenetic mineralization (mostly sulphides, carbonates, and sulphates) dominates qualitatively and quantitatively. The epigenetic mineralization was a result of complex processes occurring mostly during the late development of the Pernik basin. These processes indicate intensive tectonic, hydrothermal and volcanic activities accompanied by a change from fresh to marine sedimentation environment. Thermally altered organic matter due to some of the above processes was also identified in the basin. Most of the trace elements in the Pernik coals (Mo, Be, S, Zr, Y, Cl, Ba, Sc, Ga, Ag, V, P, Br, Ni, Co, Pb, Ca, and Ti) show an affinity to OM and phases intimately associated with OM. Some of the trace elements (Sr, Ti, Mn, Ba, Pb, Cu, Zn, Co, Cr, Ni, As, Ag, Yb, Sn, Ga, Ge, etc.) are impurities in authigenic and accessory minerals, while other trace elements (La, Ba, Cu, Ce, Sb, Bi, Zn, Pb, Cd, Nd, etc.) occur as discrete phases. Elements such as Sc, Be, Y, Ba, V, Zr, S, Mo, Ti, and Ga exceed Clarke concentrations in all of the coal types studied. It was also found that

  17. Fog water chemical composition in different geographic regions of Poland

    Science.gov (United States)

    Błaś, Marek; Polkowska, Żaneta; Sobik, Mieczysław; Klimaszewska, Kamila; Nowiński, Kamil; Namieśnik, Jacek

    2010-03-01

    The fog water samples were collected with the use of both passive and active fog collectors during 2005-2006 at 3 sites: lowland in northern Poland (Borucino; 186 m a.s.l.), valley basin in southern Poland (Zakopane; 911 m a.s.l.) and mountain top (Szrenica Mt.; 1330 m a.s.l.) in south-western Poland. For all daily samples (Borucino—25; Zakopane—4 and Szrenica—155), electric conductivity, pH, and concentrations of some anions: Cl -, F -, Br -, NO 2-, NO 3-, SO 42-, PO 43-and cations: NH 4+, Ca 2+, K +, Na + and Mg 2+ were measured. The selected ions were determined using ion suppressed chromatography (IC). Fog consists of a specific type of atmospheric phenomena. Results obtained on the basis of analysis of suitable fog samples can be treated as a source of valuable information on the chemistry of the atmosphere. Statistical analysis revealed significant differences depending on region, altitude, local morphology and, last but not least, fog origin. A distinct contrast is evident in the concentration and chemical composition between lowland radiation fog (represents lower layers of the atmosphere which are more influenced by continental emissions) versus orographic slope fog represented by a summit station, Mt Szrenica. It is partly induced by a distinction in weather conditions favouring fog existence, height of fog formation and its microphysical parameters. Acidity was associated with high concentrations of excess sulphate and nitrate in the fog water samples. Ammonium and calcium concentrations represent the most important neutralizing inputs. Collected cloud water at Szrenica Mt. includes solute contributions from emission sources located at much larger upwind distances. The fact that 95% of fog/cloud deposition is concentrated during SW-W-NW-N-NE, atmospheric circulation exerts an influence on the environmental quality of montane forests in the Sudety Mts. At numerous conspicuous convex landforms, where fog/cloud deposition becomes at least as important

  18. Areca Fiber Reinforced Epoxy Composites: Effect of Chemical Treatments on Impact Strength

    Directory of Open Access Journals (Sweden)

    S. Dhanalakshmi

    2015-06-01

    Full Text Available In this research work, impact strength of untreated, alkali treated, potassium permanganate treated, benzoyl chloride treated and acrylic acid treated areca fiber reinforced epoxy composites were studied under 40%, 50%, 60% and 70% fiber loadings. Impact strength increased with increase in fiber loading up to 60% and then showed a decline for all untreated and chemically treated areca fiber reinforced epoxy composites. The acrylic acid treated areca fiber reinforced epoxy composites with 60% fiber loading showed highest impact strength of 28.28 J/mm2 amongst all untreated and chemically treated areca/epoxy composites with same 60% fiber loading.

  19. Chemical composition of nanomodified composite binder with nano- and microsized barium silicate

    Directory of Open Access Journals (Sweden)

    KOROLEV Evgenij Valerjevich

    2014-08-01

    Full Text Available There are several possibilities to improve cement-based binders. In particular, many properties of cement stone can be enhanced by means of micro- and nanoscale modification. In a number of previous works we had shown that application of barium hydrosilicates leads to such improvement. The present article is devoted to the investigation of the chemical composition of the cement stone which is modified by means of addition of barium hydrosilicates. The modification was performed on different scales: micro- and nanoscale; the results of simultaneous multi-scale modification are also presented. The examination was carried out with help of different modern research techniques – FT IR spectroscopy, differential thermal analysis and X-ray phase analysis. Identification of the new phases and comparative quantitative assessment of their content are performed. It is found that the use of nano- and micro-sized barium hydrosilicates as additives leads to reduction of portlandite by 27...28%; by means of multi-scale modification it is possible to reduce the content of portlandite much more (by 83.3%. Due to addition of nano- and micro-sized barium-based modifiers both the amount of calcium hydrosilicates in reaction products is enlarged, and structure of the mentioned hydrosilicates is changed (the formation of a fine-grained structure of hydration products takes place. Micro-sized barium hydrosilicates are chemically active additives and promote the formation of an additional quantity of calcium hydrosilicates of type CSH (I. The use of nanoscale barium hydrosilicates promotes the formation of CSH (I and CSH (II calcium hydrosilicates, and also both riversidite and xonotlite. As a result of simultaneous application of nano- and micro-sized barium hydrosilicates the content of CSH (II increases. This can be confirmed by means of differential thermal and X-ray analysis. The amount of CSH (I, riversidite and various tobermorites is also increases. It is

  20. Particle size distribution and physico-chemical composition of clay.

    African Journals Online (AJOL)

    HP USER

    obtained after acid digestion of clay samples were used in determining the elements by Atomic. Absorption ... ignition (LOI) reveal a general reduction in composition as particles sizes reduces. However, Mg .... Murray, H.H. Diagnostic Tests for.

  1. Level and Chemical Composition of Cryoglobulins in Schizophrenia

    Science.gov (United States)

    Khoyetsyan, Aren; Boyajyan, Anna; Melkumova, Maya

    The blood samples of 40 schizophrenic patients were tested for the presence of cryoglobulins (Cgs) and composition of Cgs was examined. The elevated levels of type III Cgs, containing complement components, were detected in all study subjects.

  2. Chemical Composition of Atmospheric Aerosols in Iowa City

    Science.gov (United States)

    Jayarathne, T. S.; Stone, E.

    2013-12-01

    In this study, the seasonal and spatial variability of chemical components in atmospheric PM2.5 were investigated in Iowa City, Iowa for the first time. Daily PM samples were collected from 25 August to 10 November 2011 at two sites in Iowa City (West and East) that were separated by approximately four miles. During this time, daily average PM2.5 mass concentrations ranged from 3 - 26 μg m-3, within attainment of EPA National Ambient Air Quality Standard of 35 μg m-3. The average PM2.5 concentration was 11.2×4.9 μg m-3 (arithmetic mean × one standard deviation for n = 72). Carbonaceous aerosol (elemental carbon and organic matter) was the dominant component of PM2.5, contributing 40% of PM2.5 mass. Another 30% was due to water soluble inorganic ions (SO42-, NO3-, Cl-, Na+, NH4+, K+, Mg2+, Ca2+) with major contributions from SO42- (13%), NO3- (6%), NH4+ (6%) and Ca2+ (3%). Among the inorganic ions, SO42- exhibited the highest individual ion concentration at both sites with an average concentration of 1.5×1.2 μg m-3 at West Site and 1.5×1.3 μg m-3 at East Site. The average NO3- concentrations for this period were 0.5×0.4 μg m-3 and 0.7×0.5 μg m-3 at West and East Sites, respectively. Comparison of aerosol composition data from the two sites indicated that concentrations of SO42-, NO3-, NH4+ and organic carbon were not statistically different at the 95% confidence interval, indicating that these species were primarily influenced by regional atmospheric processes. Meanwhile, Ca2+ and elemental carbon concentrations were statistically different across the two study sites, indicating the influence of local PM sources. Unlike other ions, Ca2+ concentrations were significantly elevated at both sites in October, during the agricultural harvest, showing that re-suspended soil dust is a temporally-variable source of fine particles that peaks during the agricultural harvest season. Several episodes of elevated PM2.5 occurred in late August to early October, with

  3. Chemical composition, nutritional value, and antioxidant activities of eight mulberry cultivars from China

    National Research Council Canada - National Science Library

    Liang, Linghong; Wu, Xiangyang; Zhu, Maomao; Zhao, Weiguo; Li, Fang; Zou, Ye; Yang, Liuqing

    2012-01-01

    Mulberry (Morus, Moraceae) is widely distributed in the temperate, subtropical, or tropical regions of the world, while there are no conclusive reports on the chemical composition, nutritional value, and antioxidant properties...

  4. A study of the chemical composition of peat humic acids by adsorption liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, V.V.; Proskuryakov, V.A.; Surasinkha, S.; Platonova, M.V.; Taran, N.A. [Lev Tolstoi State Pedagogical University, Tula (Russian Federation)

    1998-12-01

    The chemical composition of peat humic acids was studied in detail by IR and UV spectroscopy, elemental, emission spectral X-ray fluorescence, and structural-group analyses, cryoscopy, and capillary gas chromatography.

  5. Chemical composition and antibacterial activity of essential oils against human pathogenic bacteria

    NARCIS (Netherlands)

    Sokovic, M.; Marin, P.D.; Brkic, D.; Griensven, van L.J.L.D.

    2008-01-01

    The chemical composition and antibacterial activity of essential oils from 10 aromatic plants Matricaria chamommilla, Mentha piperita, M. spicata, Lavandula angustifolia, Ocimum basilicum, Thymus vulgaris, Origanum vulgare, Salvia officinalis, Citrus limon and C. aurantium have been determined. Anti

  6. Chemical composition and antibacterial activity of essential oils against human pathogenic bacteria

    NARCIS (Netherlands)

    Sokovic, M.; Marin, P.D.; Brkic, D.; Griensven, van L.J.L.D.

    2008-01-01

    The chemical composition and antibacterial activity of essential oils from 10 aromatic plants Matricaria chamommilla, Mentha piperita, M. spicata, Lavandula angustifolia, Ocimum basilicum, Thymus vulgaris, Origanum vulgare, Salvia officinalis, Citrus limon and C. aurantium have been determined.

  7. Variation in size, morphology and chemical composition of polymetallic nodules from the Central Indian Ocean Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Valsangkar, A.B.; Karisiddaiah, S.M.; Parthiban, G.

    Chemical composition of 613 polymetallic nodules from 150 stations in the Central Indian Ocean Basin (CIOB) are determined and variations in Mn, Fe, Cu, Ni, Co, Zn and moisture content are studied with respect to their size and surface texture...

  8. Effects of chemical composition on the corrosion of dental alloys

    OpenAIRE

    GALO, Rodrigo; RIBEIRO, Ricardo Faria; RODRIGUES, Renata Cristina Silveira; Rocha, Luís Augusto; Mattos,Maria da Glória Chiarello de

    2012-01-01

    The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissolution of the ions occurred in all tested dental alloys and the results were strongly dependent on the g...

  9. Variation in the chemical composition, physical characteristics and ...

    African Journals Online (AJOL)

    Mariaan Viljoen

    detergent fibre (ADF) and in vitro organic matter digestibility (IVOMD). .... Results pertaining to the chemical analyses, physical properties and energy values of ...... presented in this paper may be valuable, especially when specific cultivars are ...

  10. Chemical composition and volatile compounds in the artisanal ...

    African Journals Online (AJOL)

    Araceli

    2012-09-27

    Sep 27, 2012 ... ends, the fermented product is transferred to copper ..... Clostridium bacteria or Kloeckera spp. yeast .... Evolution of chemical compounds during fermentation of A. angustifolia musts with and without addition of ammonium ...

  11. Chemically and Thermally Stable High Energy Density Silicone Composites Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Thermal energy storage systems with 300 ? 1000 kJ/kg energy density through either phase changes or chemical heat absorption are sought by NASA. This proposed effort...

  12. Chemical composition and insecticidal properties of essential oil ...

    African Journals Online (AJOL)

    chromatography/mass spectrometry (GC/MS) analysis was performed, and the contact (topical application) ... Results: Thirty-nine chemical compounds were identified by GC-MS analysis of M. .... negative control, and pyrethrum extract (25 %.

  13. Differential effects of conifer and broadleaf litter inputs on soil organic carbon chemical composition through altered soil microbial community composition

    Science.gov (United States)

    Wang, Hui; Liu, Shi-Rong; Wang, Jing-Xin; Shi, Zuo-Min; Xu, Jia; Hong, Pi-Zheng; Ming, An-Gang; Yu, Hao-Long; Chen, Lin; Lu, Li-Hua; Cai, Dao-Xiong

    2016-06-01

    A strategic selection of tree species will shift the type and quality of litter input, and subsequently magnitude and composition of the soil organic carbon (SOC) through soil microbial community. We conducted a manipulative experiment in randomized block design with leaf litter inputs of four native subtropical tree species in a Pinus massoniana plantation in southern China and found that the chemical composition of SOC did not differ significantly among treatments until after 28 months of the experiment. Contrasting leaf litter inputs had significant impacts on the amounts of total microbial, Gram-positive bacterial, and actinomycic PLFAs, but not on the amounts of total bacterial, Gram-negative bacterial, and fungal PLFAs. There were significant differences in alkyl/O-alkyl C in soils among the leaf litter input treatments, but no apparent differences in the proportions of chemical compositions (alkyl, O-alkyl, aromatic, and carbonyl C) in SOC. Soil alkyl/O-alkyl C was significantly related to the amounts of total microbial, and Gram-positive bacterial PLFAs, but not to the chemical compositions of leaf litter. Our findings suggest that changes in forest leaf litter inputs could result in changes in chemical stability of SOC through the altered microbial community composition.

  14. Chemical composition and antibacterial activity of essential oils from the Tunisian Allium nigrum L.

    OpenAIRE

    Rouis-Soussi, Lamia Sakka; Ayeb-Zakhama, El Asma; Mahjoub, Aouni; Flamini, Guido; Jannet, Hichem Ben; Harzallah-Skhiri, Fethia

    2014-01-01

    The chemical composition of the essential oils of different Allium nigrum L. organs and the antibacterial activity were evaluated. The study is particularly interesting because hitherto there are no reports on the antibacterial screening of this species with specific chemical composition. Therefore, essential oils from different organs (flowers, stems, leaves and bulbs) obtained separately by hydrodistillation were analyzed using gas chromatography–mass spectrometry (GC–MS). The antibacterial...

  15. Mechanical and Chemical Properties of Bamboo/Glass Fibers Reinforced Polyester Composites

    Directory of Open Access Journals (Sweden)

    K.Sudha Madhuri,

    2016-01-01

    Full Text Available The chemical resistance of Bamboo/Glass reinforced Polyester hybrid composites to acetic acid, Nitric acid, Hydrochloric acid, Sodium hydroxide, Sodium carbonate, Benzene, Toluene, Carbon tetrachloride and Water was studied. The tensile and impact properties of these composites were also studied. The effect of alkali treatment of bamboo fibers on these properties was studied. It was observed that the tensile and impact properties of the hybrid composites increase with glass fiber content. The author investigated the interfacial bonding between Glsss/Bamboo fiber composites by SEM. These properties found to be higher when alkali treated bamboo fibers were used in hybrid composites. The hybrid fiber composites showed better resistance to the chemicals mentioned above. The elimination of amorphous hemi-cellulose with alkali treatment leading to higher crystallinity of the bamboo fibers with alkali treatment may be responsible for these observations.

  16. Milk production and chemical composition of milk of Ukrainian mountain Carpathian sheep in pasture period

    OpenAIRE

    CHOKAN T.

    2011-01-01

    The comparative analysis of the milk chemical composition depending on milk productivity of Ukrainian Mountain Carpathian sheep during the pasture period were studied. It was found changes of milk composition (increasing of protein content, fat, dry matter and nutritive value) with a decrease of milk yield in the end period of lactation.

  17. Chemical erosion of different carbon composites under ITER-relevant plasma conditions

    NARCIS (Netherlands)

    Westerhout, J.; Borodin, D.; Al, R.S.; Brezinsek, S.; Hoen, Mhjt; Kirschner, A.; Lisgo, S.; van der Meiden, H. J.; Philipps, V.; van de Pol, M.J.; Shumack, A. E.; De Temmerman, G.; Vijvers, W. A. J.; Wright, G. M.; Cardozo, N. J. L.; Rapp, J.; van Rooij, G. J.

    2009-01-01

    We have studied the chemical erosion of different carbon composites in Pilot-PSI at ITER-relevant hydrogen plasma fluxes (similar to 10(24) m(-2) s(-1)) and low electron temperatures (T-e similar to 1 eV). Optical emission spectroscopy on the CH A-X band was used to characterize the chemical

  18. Recent Advances in the Chemical Composition of Propolis

    Directory of Open Access Journals (Sweden)

    Shuai Huang

    2014-11-01

    Full Text Available Propolis is a honeybee product with broad clinical applications. Current literature describes that propolis is collected from plant resins. From a systematic database search, 241 compounds were identified in propolis for the first time between 2000 and 2012; and they belong to such diverse chemical classes as flavonoids, phenylpropanoids, terpenenes, stilbenes, lignans, coumarins, and their prenylated derivatives, showing a pattern consistent with around 300 previously reported compounds. The chemical characteristics of propolis are linked to the diversity of geographical location, plant sources and bee species.

  19. Pasta added with chickpea flour: chemical composition, In vitro starchdigestibility and predicted glycemic index

    OpenAIRE

    2008-01-01

    Pasta was prepared with of durum wheat flour mixed with chickpea flour at two different levels and its chemical composition, in vitro starch digestibility and predicted glycemic index were assessed. Protein, ash, lipid, and dietary fiber content increased while total starch decreased with the chickpea flour level in the composite pasta, all in accordance to the composition of the legume flour. Potentially available starch decreased and resistant starch (RS) increased by adding chickpea flour ...

  20. Chemical composition of acid precipitation in central Texas

    Science.gov (United States)

    Hal B. H., Jr. Cooper; Jerry M. Demo; Jose A. Lopez

    1976-01-01

    Studies were undertaken to determine factors affecting composition of acidic precipitation formation in the Austin area of Central Texas. The study was initiated to determine background levels of acid and alkalinity producing constituents in an area with elevated natural dust levels from nearby limestone rock formations. Results showed normal rainfall pH values of 6.5...

  1. On the Formation and Chemical Composition of Super Earths

    Science.gov (United States)

    Alessi, Matthew; Pudritz, Ralph E.; Cridland, Alex J.

    2016-09-01

    Super Earths are the largest population of exoplanets and are seen to exhibit a rich diversity of compositions as inferred through their mean densities. Here we present a model that combines equilibrium chemistry in evolving disks with core accretion that tracks materials accreted onto planets during their formation. In doing so, we aim to explain why super Earths form so frequently and how they acquire such a diverse range of compositions. A key feature of our model is disk inhomogeneities, or planet traps, that act as barriers to rapid type-I migration. The traps we include are the dead zone, which can be caused by either cosmic ray or X-ray ionization, the ice line, and the heat transition. We find that in disks with sufficiently long lifetimes (≳ 4 Myr), all traps produce Jovian planets. In these disks, planet formation in the heat transition and X-ray dead zone produces hot Jupiters while the ice line and cosmic ray dead zones produce Jupiters at roughly 1 AU. Super Earth formation takes place within short-lived disks (≲ 2 Myr), whereby the disks are photoevaporated while planets are in a slow phase of gas accretion. We find that super Earth compositions range from dry and rocky ( 30 % ice by mass). The traps play a crucial role in our results, as they dictate where in the disk particular planets can accrete from, and what compositions they are able to acquire.

  2. On the formation and chemical composition of super Earths

    Science.gov (United States)

    Alessi, Matthew; Pudritz, Ralph E.; Cridland, Alex J.

    2017-01-01

    Super Earths are the largest population of exoplanets and are seen to exhibit a rich diversity of compositions as inferred through their mean densities. Here we present a model that combines equilibrium chemistry in evolving discs with core accretion that tracks materials accreted on to planets during their formation. In doing so, we aim to explain why super Earths form so frequently and how they acquire such a diverse range of compositions. A key feature of our model is disc inhomogeneities, or planet traps, that act as barriers to rapid type-I migration. The traps we include are the dead zone, which can be caused by either cosmic ray or X-ray ionization, the ice line, and the heat transition. We find that in discs with sufficiently long lifetimes (≳4 Myr), all traps produce Jovian planets. In these discs, planet formation in the heat transition and X-ray dead zone produces hot Jupiters, while the ice line and cosmic ray dead zones produce Jupiters at roughly 1 au. Super Earth formation takes place within short-lived discs (≲2 Myr), whereby the discs are photoevaporated while planets are in a slow phase of gas accretion. We find that super Earth compositions range from dry and rocky (30 per cent ice by mass). The traps play a crucial role in our results, as they dictate where in the disc particular planets can accrete from, and what compositions they are able to acquire.

  3. Effect of Chemical and Mineralogical Composition of Rocks on the ...

    African Journals Online (AJOL)

    Ethiopian Journal of Environmental Studies and Management ... composition of rocks on the chemistry of the groundwater quality. ... The predominant cations trend in both the groundwater and rock samples the study ... Therefore, it is concluded that the local rock chemistry is seriously affecting the groundwater chemistry.

  4. Chemical composition and in vitro dry matter digestibility of lichens

    Directory of Open Access Journals (Sweden)

    Torstein H. Garmo

    1986-06-01

    Full Text Available The chemical composition and in vitro dry matter digestibility of 45 samples of different species of lichen are reported. Mean content (g/100 g dry matter of the main nutrients was: crude protein 4.2, crude fat 3.2, crude fibre 16.6, ash 1.9, Ca 0.15, P 0.09, Mg 0.05, K 0.13, Na 0.035, S 0.07. The content of microminerals (mg/kg dry matter was: Cu 2.5, Mo 0.11, Zn 27.2, Se 0.12, Fe 898, Mn 154. The mean in vitro dry matter digestibility was 35%. However, the in vitro method do underestimate the dry matter digestibility of lichens. Stereocaulon spp. showed higher levels of crude protein, P, S, Cu and Mo than Cetraria spp. and Cladonia spp. Cetraria nivalis showed higher digestibility and contained more NFE, ash, Ca, Mg, but less crude fibre than Cladonia stellaris. Lichens contained less amounts of most nutrients compared with grasses (Fig. 1, exept for crude fat, NFE, Se and Fe.Kjemisk innhald og in vitro fordøyelsesgrad av lav.Abstract in Norwegian / Samandrag: Kjemisk innhald og in vitro fordøyelsesgrad av tørrstoffet er bestemt i 45 prøver av beitelav frå to stader i Sør-Noreg. Middel innhald (g/100g tørrstoff av følgjande næringsstoff var: protein 4.2, feitt 3.2, trevlar 16.6, oske 1.9, kalsium 0.15, fosfor 0.09, magnesium 0.05, kalium 0.13, natrium 0.035, svovel 0.07. Innhaldet (mg/kg tørrstoff av mikronæringsstoffa var: kopar 2.5, molybden 0.11, sink 27.2, selen 0.12, jern 898 og mangan 154. Den midlare fordøyelsesgraden av tørrstoffet i lav-prøvene var 35%, men in vitro fordøyelsesanalyser undervurderer fordøyelsesgraden av lav. Det var ein stor variasjon mellom dei ulike lavartane for dei fleste næringsstoffa og fordøyelsesgraden. Stereocaulon spp. inneheldt meir protein, fosfor, svovel, kopar og molybden enn Cetraria spp. og Cladonia spp. Gulskinn hadde høgare fordøyelsesgrad, og innehaldet av NFE, oske, kalsium og magnesium var høgre enn i kvitkrull, medan trevleinnhaldet var størst i kvitkrull. Lav inneheldt

  5. The chemical composition and biological activities of essential oil ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-12-15

    Dec 15, 2009 ... INTRODUCTION. Schinus terebinthifolius ... belongs to the Anacardiaceae family of plants (Manrique et al., 2008). ... among some of the ancient Chilean Amerindians. In ..... tation to a specific habitat, many plants produce chemical compounds ... London, U.K.: Crown Agents for Overseas Governments and.

  6. Chemical composition of essential oil of Psidium cattleianum var ...

    African Journals Online (AJOL)

    rajuc

    2012-04-24

    Apr 24, 2012 ... Research into plant essential oils have also gained momentum due to their fumigant .... 1 based on their chemical structures in which they are classified. The GC-MS ... It is also well known as a preservative in food, drugs and ...

  7. Chemical Composition, In Situ Degradability and In Vitro Gas ...

    African Journals Online (AJOL)

    forage harvested at different re-growth stages by measuring the chemical ... production was higher for leaves followed by branches with mean value of 43.7 ... degradability parameters help not only to be able to maximize the nutrient .... produced at time t, b the potential gas production and c the rate of gas ..... Wolf, B, 1982.

  8. Floral Scent in Wisteria: Chemical Composition, Emission Pattern and Regulation

    Science.gov (United States)

    Volatile chemicals emitted from the flowers of Chinese wisteria (Wisteria sinenesis) and Japanese wisteria (W. floribunda) were collected using a dynamic headspace technique and identified by a gas chromatography-mass spectrometry. About 30 and 22 compounds were detected from Chinese wisteria and Ja...

  9. Influence of Breed, Parity and Food Intake on Chemical Composition of First Colostrum in Cow

    Directory of Open Access Journals (Sweden)

    Simona Zarcula

    2010-05-01

    Full Text Available The aim of this research was to establish the influence of breed, parity and food intake on chemical composition of first colostrum. We observed that fat, proteins, lactose and dry matter were higher in cows from second and third lactation compared to those in fourth lactation. Cow's breed also influenced the colostrum composition, superior quality being obtained in case of Romanian White and Black comparing Holstein Friesian cows. The unbalanced energo-proteic ratio had a negative impact on chemical composition of first colostrum.

  10. Relationship between chemical composition and in situ rumen degradation characteristics of maize silages in dairy cows.

    Science.gov (United States)

    Ali, M; van Duinkerken, G; Cone, J W; Klop, A; Blok, M C; Spek, J W; Bruinenberg, M H; Hendriks, W H

    2014-11-01

    Several in situ studies have been conducted on maize silages to determine the effect of individual factors such as maturity stage, chop length and ensiling of maize crop on the rumen degradation but the information on the relationship between chemical composition and in situ rumen degradation characteristics remains scarce. The objectives of this study were to determine and describe relationships between the chemical composition and the rumen degradation characteristics of dry matter (DM), organic matter (OM), CP, starch and aNDFom (NDF assayed with a heat stable amylase and expressed exclusive of residual ash) of maize silages. In all, 75 maize silage samples were selected, with a broad range in chemical composition and quality parameters. The samples were incubated in the rumen for 2, 4, 8, 16, 32, 72 and 336 h, using the nylon bag technique. Large range was found in the rumen degradable fractions of DM, OM, CP, starch and aNDFom because of the broad range in chemical composition and quality parameters. The new database with in situ rumen degradation characteristics of DM, OM, CP, starch and aNDFom of the maize silages was obtained under uniform experimental conditions; same cows, same incubation protocol and same chemical analysis procedures. Regression equations were developed with significant predictors (P<0.05) describing moderate and weak relationships between the chemical composition and the washout fraction, rumen undegradable fraction, potentially rumen degradable fraction, fractional degradation rate and effective rumen degradable fraction of DM, OM, CP, starch and aNDFom.

  11. Direct Monte Carlo simulation of the chemical equilibrium composition of detonation products

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M.S.

    1993-06-01

    A new Monte Carlo simulation method has been developed by the author which gives the equilibrium chemical composition of a molecular fluid directly. The usual NPT ensemble (isothermal-isobaric) is implemented with N being the number of atoms instead of molecules. Changes in chemical composition are treated as correlated spatial moves of atoms. Given the interaction potentials between molecular products, ``exact`` EOS points including the equilibrium chemical composition can be determined from the simulations. This method is applied to detonation products at conditions in the region near the Chapman- Jouget state. For the example of NO, it is shown that the CJ detonation velocity can be determined to a few meters per second. A rather small change in cross potentials is shown to shift the chemical equilibrium and the CJ conditions significantly.

  12. Rapid Characterization of Woody Biomass Digestibility and Chemical Composition Using Near-infrared Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    Shen Hou; Laigeng Li

    2011-01-01

    Rapid determination of the properties of lignocellulosic material is highly desirable for biomass production and utilization. In the present study, measurements of woody biomass digestibility and chemical composition using near-infrared reflectance (NIR) spectroscopy were calibrated. Poplar and eucalyptus materials were recorded in NIR spectrum as well as determined for their chemical compositions of Klason lignin, α-celluiose, holocellulose, lignin syringyl/guaiacyl (S/G) ratio and enzymatic digestibility. Fitting of the NIR information with chemical properties and digestibility by partial least-squares (PLS) regression generated a group of trained NIR models that were able to be used for rapid biomass measurement. Applying the models for woody biomass measurements led to a reliable evaluation of the chemical composition and digestibility, suggesting the feasibility of using NIR spectroscopy in the rapid characterization of biomass properties.

  13. Mechanical behavior of chemically treated Jute/Polymer composites

    Directory of Open Access Journals (Sweden)

    Murali B

    2014-03-01

    Full Text Available Fiber which serves as a reinforcement in reinforced plastics may be synthetic or natural past studies show that only artificial fibers such as glass, carbon etc., have been used in fiber reinforced plastics. Although glass and other synthetic fiber reinforced plastics possess high specific strength, their fields of application are very limited because of their inherent higher cost of production. In this connection, an investigation has been carried out to make use of jute , a natural fiber abundantly available in India. Natural fibers are not only strong and lightweight but also relatively very cheap. In the present work, jute composites are developed and their mechanical properties are evaluated. Mechanical properties of jute/polymer and compared with glass fiber/epoxy. These results indicate that jute can be used as a potential reinforcing material for making low load bearing thermoplastic composites.

  14. Fabrication of fiber-reinforced composites by chemical vapor infiltration

    Energy Technology Data Exchange (ETDEWEB)

    Besmann, T.M.; Stinton, D.P. [Oak Ridge National Lab., TN (United States); Matlin, W.M.; Liaw, P.K. [Univ. of Tennessee, Knoxville, TN (United States)

    1996-08-01

    Processing equipment for the infiltration of fiber-reinforced composite tubes is being designed that incorporates improvements over the equipment used to infiltrate disks. A computer-controlled machine-man interface is being developed to allow for total control of all processing variables. Additionally, several improvements are being made to the furnace that will reduce the complexity and cost of the process. These improvements include the incorporation of free standing preforms, cast mandrels, and simpler graphite heating elements.

  15. Fabrication of fiber-reinforced composites by chemical vapor infiltration

    Energy Technology Data Exchange (ETDEWEB)

    Besmann, T.M.; Matlin, W.M.; Stinton, D.P.; Liaw, P.K.

    1996-06-01

    Processing equipment for the infiltration of fiber-reinforced composite tubes is being designed that incorporates improvements over the equipment used to infiltrate disks. A computer-controlled machine-man interface is being developed to allow for total control of all processing variables. Additionally, several improvements are being made to the furnace that will reduce the complexity and cost of the process. These improvements include the incorporation of free standing preforms, cast mandrels, and simpler graphite heating elements.

  16. Chemical Composition of Ground Pearl (Eurhizococcus colombianus Cysts

    Directory of Open Access Journals (Sweden)

    Fernando Echeverri

    2008-01-01

    Full Text Available Ground pearl (Eurhizococcus colombianus is a crop pest in Colombia, withspecial impact on fig, grass, rubus and tomato plants. The insect is resistant to externalinsecticide application because it produces a thick waxy shell that isolates it from theenvironment. The composition of this shell was determined by NMR and MS as atriglyceride, whose fatty acid is transformed into other products with the metamorphosis ofthe insect. Additionally, several enzymatic inhibitors were assayed to control the insectwith negative results.

  17. Regulating continent growth and composition by chemical weathering.

    Science.gov (United States)

    Lee, Cin-Ty Aeolus; Morton, Douglas M; Little, Mark G; Kistler, Ronald; Horodyskyj, Ulyana N; Leeman, William P; Agranier, Arnaud

    2008-04-01

    Continents ride high above the ocean floor because they are underlain by thick, low-density, Si-rich, and Mg-poor crust. However, the parental magmas of continents were basaltic, which means they must have lost Mg relative to Si during their maturation into continents. Igneous differentiation followed by lower crustal delamination and chemical weathering followed by subduction recycling are possible solutions, but the relative magnitudes of each process have never been quantitatively constrained because of the lack of appropriate data. Here, we show that the relative contributions of these processes can be obtained by simultaneous examination of Mg and Li (an analog for Mg) on the regional and global scales in arcs, delaminated lower crust, and river waters. At least 20% of Mg is lost from continents by weathering, which translates into >20% of continental mass lost by weathering (40% by delamination). Chemical weathering leaves behind a more Si-rich and Mg-poor crust, which is less dense and hence decreases the probability of crustal recycling by subduction. Net continental growth is thus modulated by chemical weathering and likely influenced by secular changes in weathering mechanisms.

  18. Gross job flows and firms

    OpenAIRE

    Scott Schuh; Robert K. Triest

    1999-01-01

    This paper extends the work of Dunne, Roberts, and Samuelson [3] and Davis, Haltiwanger, and Schuh [2] on gross job flows among manufacturing plants. Gross job creation, destruction, and reallocation have been shown to be important in understanding the birth, growth, and death of plants, and the relation of plant life cycles to the business cycle. However, little is known about job flows between firms or how job flows among plants occur within firms (corporate restructuring). We use informati...

  19. Chemical composition of primary cosmic rays with IceCube

    Science.gov (United States)

    Xu, Chen

    Ground detector arrays have been used to measure high energy cosmic rays for decades to overcome their very low rate. IceCube is a special case with its 3D deployment and unique location---the South Pole. Although all 86 strings and 81 stations of IceCube were completed in 2011, IceCube began to take data in 2006, after the completion of the first 9 strings. In this thesis, experimental data taken in 2009 with 59 strings are used for composition analysis albeit some techniques are illustrated with the 40-string data. Simulation is essential in the composition work. Simulated data must be compared against the experimental data to find the right mix of cosmic ray components. However, because of limited computing resources and complexities of cosmic rays, the simulation in IceCube is well behind the experiment. The lower and upper bounds of primary energy in simulation for events that go through IceTop and the deep arrays of IceCube are 1014 eV and 1017 eV. However, since IceCube has a threshold energy about several hundred TeV, and an upper limit of 10 18 eV, the full energy range cannot be explored in this thesis. The approach taken to the composition problem in this thesis is a 2D Bayesian unfolding. It takes account of the measured IceTop and InIce energy spectrum and outputs the expected primary energy spectrum of different mass components. Studies of the uncertainties in the results are not complete because of limited simulation and understanding of the new detector and South Pole environment.

  20. Characterization of chemical composition of bee pollen in China.

    Science.gov (United States)

    Yang, Kai; Wu, Dan; Ye, Xingqian; Liu, Donghong; Chen, Jianchu; Sun, Peilong

    2013-01-23

    Bee pollen has been praised for its good nutrition and therapeutic values. China is the largest producer in the world. Twelve common varieties of monofloral bee pollen collected from China's main producing regions were selected for nutritional composition analysis, including proximate contents, dietary fibers, amino acid distribution, fatty acid composition, and mineral elements. The proximate compositions mostly met the specifications regulating pollen load quality of China. Proline and glutamic acids were found to be the predominant amino acids in the form of both total amino and free amino acids. Lysine was the relative limiting amino acid. The percentage of total essential amino acids (TEAA) to total amino acids (TAA) reached the nutrition recommendation of the Food and Agricultural Organization (FAO). The major fatty acids, presented as mean values, were C18:3 (25.1%), C16:0 (19.6%), C18:1 (17.3%), C18:2 (8.78%), C22:0 (4.07%), and C18:0 (2.96%) acids. The proportions of C18:3 were generally higher than those of C18:2, and the ratio of total unsaturated fatty acids (TUS) to total saturated fatty acids (TS) was >1.0, except for Nelumbo nucifera Gaertn. pollen for the characteristic absence of C18:3 acids. High levels of beneficial elements such as K, Ca, Mg, Zn, Fe, Mn. and Cu were observed in pollen samples. The contents of detrimental trace elements of Cd, Pb, and Hg were primarily lower or not detected. However, more attention should be paid to a large amount of Al, with a concentration of >100 mg/kg DW in most samples. There were some significant differences between samples. On the whole, the Chinese bee pollen was evaluated as a good complement to diet.

  1. Software for analysis of chemical mixtures--composition, occurrence, distribution, and possible toxicity

    Science.gov (United States)

    Scott, Jonathon C.; Skach, Kenneth A.; Toccalino, Patricia L.

    2013-01-01

    The composition, occurrence, distribution, and possible toxicity of chemical mixtures in the environment are research concerns of the U.S. Geological Survey and others. The presence of specific chemical mixtures may serve as indicators of natural phenomena or human-caused events. Chemical mixtures may also have ecological, industrial, geochemical, or toxicological effects. Chemical-mixture occurrences vary by analyte composition and concentration. Four related computer programs have been developed by the National Water-Quality Assessment Program of the U.S. Geological Survey for research of chemical-mixture compositions, occurrences, distributions, and possible toxicities. The compositions and occurrences are identified for the user-supplied data, and therefore the resultant counts are constrained by the user’s choices for the selection of chemicals, reporting limits for the analytical methods, spatial coverage, and time span for the data supplied. The distribution of chemical mixtures may be spatial, temporal, and (or) related to some other variable, such as chemical usage. Possible toxicities optionally are estimated from user-supplied benchmark data. The software for the analysis of chemical mixtures described in this report is designed to work with chemical-analysis data files retrieved from the U.S. Geological Survey National Water Information System but can also be used with appropriately formatted data from other sources. Installation and usage of the mixture software are documented. This mixture software was designed to function with minimal changes on a variety of computer-operating systems. To obtain the software described herein and other U.S. Geological Survey software, visit http://water.usgs.gov/software/.

  2. Testing chemical composition of highest energy comic rays

    CERN Document Server

    Nosek, D; Noskova, J; Ebr, J

    2013-01-01

    We study basic characteristics of distributions of the depths of shower maximum in air showers caused by cosmic rays with the highest energies. The consistency between their average values and widths, and their energy dependences are discussed within a simple phenomenological model of shower development independently of assumptions about detailed features of high--energy interactions. It is shown that reliable information on primary species can be derived within a partition method. We present examples demonstrating implications for the changes in mass composition of primary cosmic rays.

  3. Chemical Composition And Nutritional Evaluation Of Leea Guineensis Seed

    OpenAIRE

    Ajiboye B.O; Oso A.O; Kobomoje O.S

    2014-01-01

    The proximate composition, minerals, fatty acids and amino acids profile of Leea guineensis seeds were investigated. The results of the proximate analysis revealed that Leea guineensis seeds have crude protein of 22.30 ±0.45%, crude fiber of 14.38±1.20% and ash of 6.96 ±0.16%. The results also shows that Leea guineensis seeds is a good sources of dietary minerals especially potassium, phosphorus, magnesium, manganese and copper. Fatty acids profile of the s...

  4. Simulation of aerosol chemical compositions in the Western Mediterranean Sea

    Science.gov (United States)

    Chrit, Mounir; Kata Sartelet, Karine; Sciare, Jean; Marchand, Nicolas; Pey, Jorge; Sellegri, Karine

    2016-04-01

    This work aims at evaluating the chemical transport model (CTM) Polair3d of the air-quality modelling platform Polyphemus during the ChArMex summer campaigns of 2013, using ground-based measurements performed at ERSA (Cape Corsica, France), and at determining the processes controlling organic aerosol concentrations at ERSA. Simulations are compared to measurements for concentrations of both organic and inorganic species, as well as the ratio of biogenic versus anthropogenic particles, and organic aerosol properties (oxidation state). For inorganics, the concentrations of sulphate, sodium, chloride, ammonium and nitrate are compared to measurements. Non-sea-salt sulphate and ammonium concentrations are well reproduced by the model. However, because of the geographic location of the measurement station at Cape Corsica which undergoes strong wind velocities and sea effects, sea-salt sulphate, sodium, chloride and nitrate concentrations are strongly influenced by the parameterizations used for sea-salt emissions. Different parameterizations are compared and a parameterization is chosen after comparison to sodium measurements. For organics, the concentrations are well modelled when compared to experimental values. Anthropogenic particles are influenced by emission of semi-volatile organic compounds (SVOC). Measurements allow us to refine the estimation of those emissions, which are currently missing in emission inventories. Although concentrations of biogenic particles are well simulated, the organic chemical compounds are not enough oxidised in the model. The observed oxidation state of organics shows that the oligomerisation of pinonaldehyde was over-estimated in Polyphemus. To improve the oxidation property of organics, the formation of extremely low volatile organic compounds from autoxidation of monoterpenes is added to Polyphemus, using recently published data from chamber experiments. These chemical compounds are highly oxygenated and are formed rapidly, as first

  5. Fabrication of fiber-reinforced composites by chemical vapor infiltration

    Energy Technology Data Exchange (ETDEWEB)

    Besmann, T.M.; McLaughlin, J.C. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.; Probst, K.J.; Anderson, T.J. [Univ. of Florida, Gainesville, FL (United States). Dept. of Chemical Engineering; Starr, T.L. [Georgia Inst. of Tech., Atlanta, GA (United States). Dept. of Materials Science and Engineering

    1997-12-01

    Silicon carbide-based heat exchanger tubes are of interest to energy production and conversion systems due to their excellent high temperature properties. Fiber-reinforced SiC is of particular importance for these applications since it is substantially tougher than monolithic SiC, and therefore more damage and thermal shock tolerant. This paper reviews a program to develop a scaled-up system for the chemical vapor infiltration of tubular shapes of fiber-reinforced SiC. The efforts include producing a unique furnace design, extensive process and system modeling, and experimental efforts to demonstrate tube fabrication.

  6. Fabrication of fiber-reinforced composites by chemical vapor infiltration

    Energy Technology Data Exchange (ETDEWEB)

    Matlin, W.M. [Univ. of Tennessee, Knoxville, TN (United States); Stinton, D.P.; Besmann, T.M. [Oak Ridge National Lab., TN (United States)

    1995-08-01

    A two-step forced chemical vapor infiltration process was developed that reduced infiltration times for 4.45 cm dia. by 1.27 cm thick Nicalon{sup +} fiber preforms by two thirds while maintaining final densities near 90 %. In the first stage of the process, micro-voids within fiber bundles in the cloth were uniformly infiltrated throughout the preform. In the second stage, the deposition rate was increased to more rapidly fill the macro-voids between bundles within the cloth and between layers of cloth. By varying the thermal gradient across the preform uniform infiltration rates were maintained and high final densities achieved.

  7. Chemical composition of red Vranec wines from different locations

    OpenAIRE

    Neceva, Zaneta; Ivanova, Violeta

    2016-01-01

    In this study, red Vranec wines (vintage 2014) were produced from grapes grown at different locations: Barovo, Disan, Gradsko and Bitola. Wines were produced with same technology, applying traditional way of production. In addition, following chemical parameters which influence the wine quality were determined: total acidity, pH, volatile acidity, alcohol, SO2 (free and total) and reducing sugars. Wines contained total acids in range from 4.9 to 7.1 g/L and the volatile acidity was in range f...

  8. [Analysis of main chemical composition in hydrogenated rosin from Zhuzhou].

    Science.gov (United States)

    Duan, W G; Chen, X P; Wang, L L; Deng, S; Zhou, Y H; An, X N

    2001-01-01

    The acid fraction, the main part of the hydrogenated rosin produced by Zhuzhou Forest Chemicals Plant of China, was separated from neutral fraction by modified DEAE-Sephadex ion exchange chromatography and analyzed with GC-MS-DS technique by using DB-5 capillary column. Six dihydroabietic-type resin acids, four dihydropimaric/isopimaric-type resin acids and four tetrahydroabietic-type resin acids were identified. The hydrogenated rosin is composed mainly of 8-abietenoic acid, 18-abietanoic acid, 13-abietenoic acid, 8 alpha, 13 beta-abietanoic acid, 13 beta-8-abietenoic acid and 8-isopimarenoic acid etc.

  9. Composite reweighting with Imaginary Chemical Potentials in SU(3)

    CERN Document Server

    Crompton, P R

    2002-01-01

    We review the overlap pathology of the Glasgow reweighting method for finite density QCD, and discuss the sampling bias that effects the determination of the ensemble-averaged fugacity polynomial expansion coefficients that form the Grand Canonical Partition function. The expectation of the difference in free energies between canonical partition functions generated with different measures is presented as an indicator of a systematic quark number dependent biasing in the reweighting approach. The advantages of building up an unbiased polynomial expansion for the Grand Canonical Partition function through a series of parallel ensembles generated by reweighting with imaginary chemical potentials are then contrasted with addressing the overlap pathology through a secondary reweighting.

  10. Chemical-garden formation, morphology, and composition. I. Effect of the nature of the cations.

    Science.gov (United States)

    Cartwright, Julyan H E; Escribano, Bruno; Sainz-Daz, C Ignacio

    2011-04-05

    We have grown chemical gardens in different sodium silicate solutions from several metal-ion salts--calcium chloride, manganese chloride, cobalt chloride, and nickel sulfate--with cations from period 4 of the periodic table. We have studied their formation process using photography, examined the morphologies produced using scanning electron microscopy (SEM), and analyzed chemical compositions using X-ray powder diffraction (XRD) and energy dispersive X-ray analysis (EDX) to understand better the physical and chemical processes involved in the chemical-garden reaction. We have identified different growth regimes in these salts that are dependent on the concentration of silicate solution and the nature of the cations involved.

  11. Chemical composition distribution analysis of photoresist copolymers and influence on ArF lithographic performance

    Science.gov (United States)

    Momose, Hikaru; Yasuda, Atsushi; Ueda, Akifumi; Iseki, Takayuki; Ute, Koichi; Nishimura, Takashi; Nakagawa, Ryo; Kitayama, Tatsuki

    2007-03-01

    For getting information about the distribution of chemical composition, several model polymers were prepared under different polymerization conditions and were measured by critical adsorption point-liquid chromatography (CAP-LC). In the copolymer system of 8- and 9- (4-oxatricyclo[5.2.1.0 2,6]decane-3-one) acrylate (OTDA) and 2-ethyl-2-adamantyl methacrylate (EAdMA), the peak shapes of the CAP-LC chromatogram varied according to the polymerization condition although they indicated same molecular weight and averaged chemical composition. The difference of the CAP-LC elution curves was related to the chemical composition distribution of copolymers for CAP-LC measurement combined with proton nuclear magnetic resonance (1H-NMR). The terpolymers consisted of α-hydroxy-γ-butyrolactone methacrylate (GBLMA), 2-methyl-2-adamantyl methacrylate (MAdMA) and 1-hydroxy-3-adamantyl methacrylate (HAdMA) were prepared under various polymerization conditions. In the terpolymer system that had same molecular weight and average chemical composition, the solubility parameter (δ) and the dissolution rate were measured. The δ value and the dissolution rate curve were different among these terpolymers. It was suggested that the δ value and the chemical composition distribution of these terpolymers have a significant influence on the lithographic performance.

  12. [Influence of specification on chemical composition of dissolution and hepatocytes toxicity of Polygonum multiflorum].

    Science.gov (United States)

    lI, Yu-Meng; Li, Rui-Yu; Niu, Ming; Li, Chun-Yu; Bai, Zhao-Fang; Feng, Wu-Wen; Zhang, Cong-En; Tan, Peng; Huang, Zhi-Pu; Ma, Wei-Guang; Wang, Jia-Bo; Xiao, Xiao-He

    2016-03-01

    According to different toxicities of various aqueous extracts of Polygonum multiflorum on hepatocyte, the impacts of chemical composition on the safety of P. multiforum was studied. In this study, 8 main chemical compositions in aqueous extracts of P. multiflorum were determined by the established HPLC method; at the same time, the inhibition ratios of different aqueous extracts of P. multiflorum on L02 cell were determined. Afterwards, the potential compounds related to the toxicity of P. multiforum were tentatively found through a multiple correlation analysis. The results showed that P. multiforum with different chemical compositions exhibited great differences in dissolution. The hepatocyte toxicity of P. multiflorum powder was much greater than P. multiflorum lumps. In addition, three constituents closely related to toxicity of P. multiflorum were found by multiple correlation analysis. The study revealed that chemical composition of P. multiflorum is closely related to the hepatotoxicity, and the hepatotoxicity of P. multiflorum powder is greater than that of other dosage forms. This study indicates that P. multiflorum with different chemical compositions show varying toxicity, which therefore shall be given high attention. Copyright© by the Chinese Pharmaceutical Association.

  13. Chemical and Oxygen Isotopic Composition of Roman and Late Antique Glass from Northern Greece

    Directory of Open Access Journals (Sweden)

    Alberta Silvestri

    2017-01-01

    Full Text Available The present paper emphasizes the importance of measuring the oxygen isotopic and chemical compositions of ancient glass, in order to constrain some features such as age, raw materials, and production technologies and to identify the “fingerprint” of local productions. In this context, thirty-nine Roman and late Antique glass samples and eight chert samples from northern Greece were selected and analysed for their oxygen isotopic and chemical compositions. Results show that the majority of glass samples are produced using natron as flux and have δ18O values of about 15.5‰, plus or minus a few tenths of one per mil, suggesting that raw materials probably come from Levantine area. Four samples are heavily enriched in 18O, and their chemical composition clearly shows that they were made with soda plant ash as flux. Isotopic and chemical data of Greek chert samples support the hypothesis of local production of the above samples. About half of the glass samples have chemical compositions, which allow their age to be constrained to the late Antique period. For the remaining glass, similarities with literature compositional groups are reported and discussed.

  14. Nanoscale chemical interaction enhances the physical properties of bioglass composites.

    Science.gov (United States)

    Ravarian, Roya; Zhong, Xia; Barbeck, Mike; Ghanaati, Shahram; Kirkpatrick, Charles James; Murphy, Ciara M; Schindeler, Aaron; Chrzanowski, Wojciech; Dehghani, Fariba

    2013-10-22

    Bioglasses are favorable biomaterials for bone tissue engineering; however, their applications are limited due to their brittleness. In addition, the early failure in the interface is a common problem of composites of bioglass and a polymer with high mechanical strength. This effect is due to the phase separation, nonhomogeneous mixture, nonuniform mechanical strength, and different degradation properties of two compounds. To address these issues, in this study a nanoscale interaction between poly(methyl methacrylate) (PMMA) and bioactive glass was formed via silane coupling agent (3-trimethoxysilyl)propyl methacrylate (MPMA). A monolith was produced at optimum composition from this hybrid by the sol-gel method at 50 °C with a rapid gelation time (hybrid. The in vivo studies in mice demonstrated that the integrity of the hybrids was maintained in subcutaneous implantation. They induced mainly a mononuclear phagocytic tissue reaction with a low level of inflammation, while bioglass provoked a tissue reaction with TRAP-positive multinucleated giant cells. These results demonstrated that the presence of a nanoscale interaction between bioglass and PMMA affects the properties of bioglass and broadens its potential applications for bone replacement.

  15. Chemical Composition and Antioxidant Capacity of Brazilian Passiflora Seed Oils.

    Science.gov (United States)

    de Santana, Fernanda Carvalho; Shinagawa, Fernanda Branco; Araujo, Elias da Silva; Costa, Ana Maria; Mancini-Filho, Jorge

    2015-12-01

    The seed oils of different varieties of 4 Passiflora species cultivated in Brazil were analyzed and compared regarding their physicochemical parameters, fatty acid composition and the presence of minor components, such as phytosterols, tocopherols, total carotenoids, and phenolic compounds. The antioxidant capacities of the oil extracts were determined using the 2,2'azinobis [3-ethylbenzothiazoline-6-sulfonic acid] and oxygen radical absorbance capacity methods. The results revealed that all studied Passiflora seed oils possessed similar physicochemical characteristics, except for color, and predominantly contained polyunsaturated fatty acids with a high percentage of linolenic acid (68.75% to 71.54%). Other than the total phytosterol content, the extracted oil from Passiflora setacea BRS Pérola do Cerrado seeds had higher quantities (% times higher than the average of all samples), of carotenoids (44%), phenolic compounds (282%) and vitamin E (215%, 56%, 398%, and 100% for the α-tocopherol, β-tocopherol, γ-tocopherol, and δ-tocopherol isomers, respectively). The methanolic extracts from Passiflora setacea BRS Pérola do Cerrado seed oil also showed higher antioxidant activity, which was positively correlated with the total phenolic, δ-tocopherol, and vitamin E contents. For the first time, these results indicate that Passiflora species have strong potential regarding the use of their seeds for oil extraction. Due to their interesting composition, the seed oils may be used as a raw material in manufacturing industries in addition to other widely used vegetable oils.

  16. On the Formation and Chemical Composition of Super Earths

    CERN Document Server

    Alessi, Matthew; Cridland, Alex J

    2016-01-01

    Super Earths are the largest population of exoplanets and are seen to exhibit a rich diversity of compositions as inferred through their mean densities. Here we present a model that combines equilibrium chemistry in evolving disks with core accretion that tracks materials accreted onto planets during their formation. In doing so, we aim to explain why super Earths form so frequently and how they acquire such a diverse range of compositions. A key feature of our model is disk inhomogeneities, or planet traps, that act as barriers to rapid type-I migration. The traps we include are the dead zone, which can be caused by either cosmic ray or X-ray ionization, the ice line, and the heat transition. We find that in disks with sufficiently long lifetimes ($\\gtrsim$ 4 Myr), all traps produce Jovian planets. In these disks, planet formation in the heat transition and X-ray dead zone produces hot Jupiters while the ice line and cosmic ray dead zones produce Jupiters at roughly 1 AU. Super Earth formation takes place wi...

  17. An estimate of the chemical composition of Titan's lakes

    CERN Document Server

    Cordier, D; Lunine, J -I; Lavvas, P; Vuitton, V

    2009-01-01

    Hundreds of radar-dark patches interpreted as lakes have been discovered in the north and south polar regions of Titan. We have estimated the composition of these lakes by using the direct abundance measurements from the Gas Chromatograph Mass Spectrometer (GCMS) aboard the Huygens probe and recent photochemical models based on the vertical temperature profile derived by the Huygens Atmospheric Structure Instrument (HASI). Thermodynamic equilibrium is assumed between the atmosphere and the lakes, which are also considered as nonideal solutions. We find that the main constituents of the lakes are ethane (C2H6) (~76-79%), propane (C3H8) (~7-8%), methane (CH4) (~5-10%), hydrogen cyanide (HCN) (~2-3%), butene (C4H8) (~1%), butane (C4H10) (~1%) and acetylene (C2H2) (~1%). The calculated composition of lakes is then substantially different from what has been expected from models elaborated prior to the exploration of Titan by the Cassini-Huygens spacecraft.

  18. Chemical composition of meat in two cyprinid species

    Directory of Open Access Journals (Sweden)

    Valerica Macovei

    2009-06-01

    Full Text Available The biochemical analyses of the meat were determined in two species of carps, respectively Cyprinus carpio and Ctenopharyngodon idella. We worked on four groups of 10 fishes each (two groups for C. carpio and two groups for Ct. idella. One group from both species was fed with special fodder, and the other two groups were fed with clover (Trifolium pratense and reeds (Phragmites communis for C. carpio and Ct. idella respectively. The determination was made in the laboratory of chemical analyses of the Faculty of Animal Sciences, University of Agricultural Sciences and Veterinary Medicine Iaşi and we determined the content of the meat in proteins, fat, dry substance and minerals. The characteristic chemicals of the meat were determined on the extracted sample from the lateral musculature of the body. Biochemical analysis of meat from the four carp lots shows that protein content of meat is higher in groups which received combined feed compared to group which individuals were fed with natural food. Therefore, in case of feeding fish with combined fodder the protein content of meat increases, which proves a good recovery of protein in feed. Fat content and minerals in cyprinid meat are both higher in individuals fed with combined feed compared to those fed with natural components. When fat content in meat is higher, the dry matter content in meat is higher.

  19. Influence of the chemical composition on steel casting performance

    Directory of Open Access Journals (Sweden)

    Roney Eduardo Lino

    2017-01-01

    Full Text Available Improving the quality of steel and the steelmaking process has been a matter of routine for metallurgical engineers and steelmaking companies in a demanding market for quality products at highly competitive price. The chemical and temperature adjustment are made during the secondary refining process, as well as the inclusion modification required to product quality, and also the demand for castability accuracy. Continuous casting process is the most used solidification casting process, in which the flow of pouring liquid metal through the submerged entry nozzle is assured by the correct temperature and the formation of liquid inclusion in the casting temperature. Thermocalc and CEQCSI were the software used in this work to assess the effect of carbon, silicon and sulphur in the castability window of the aluminium vs calcium phase diagrams. They have proved to be highly suitable and effective and the results showed that the chemical elements used directly affected the position of the castability window of carbon steel. An analysis of a 0.2%C billet sample using Scanning Electron Microscopy showed that there is a great heterogeneity of inclusions in aluminium-killed and calcium-treated steel.

  20. Chemical Compositions of Kinematically Selected Outer Halo Stars

    CERN Document Server

    Zhang, Lan; Aoki, Wako; Zhao, Gang; Chiba, Masashi

    2009-01-01

    Chemical abundances of 26 metal-poor dwarfs and giants are determined from high-resolution and high signal-to-noise ratio spectra obtained with Subaru/HDS. The sample is selected so that most of the objects have outer-halo kinematics. Self-consistent atmospheric parameters were determined by an iterative procedure based on spectroscopic analysis. Abundances of 13 elements, including $\\alpha$-elements (Mg, Si, Ca, Ti), odd-Z light elements (Na, Sc), iron-peak elements (Cr, Mn, Fe, Ni, Zn) and neutron-capture elements (Y, Ba), are determined by two independent data reduction and LTE analysis procedures, confirming the consistency of the stellar parameters and abundances results. We find a decreasing trend of [$\\alpha$/Fe] with increasing [Fe/H] for the range of $-3.5 <$ [Fe/H]$ < -1$, as found by Stephens and Boesgaard (2002). [Zn/Fe] values of most objects in our sample are slightly lower than the bulk of halo stars previously studied. These results are discussed as possible chemical properties of the ou...

  1. Chemical composition of fresh snowfalls at Palmer Station, Antarctica

    Science.gov (United States)

    DeFelice, T. P.

    A first time investigation was performed to establish a chemical baseline for snowfall at Palmer Station Antarctica (64°46'S, 64°05'W) since there was no such record. A chemical baseline for snow could be use to validate climate change studies based on ice core analyses. The snow samples contained (from high to low mass concentration) total organic carbon, chloride, inorganic carbon, sodium, sulfate, magnesium, calcium, potassium, fluoride, ammonium, and nitrate, excluding hydrogen and hydroxide. The pH of these samples ranged between 4.0-6.2. The relatively low nitrate and relatively high sulfate concentrations found in our samples are consistent with the results of other studies for this region of Antarctica. The ions and pH do not appear to favor a particular wind direction during this period. The total deposition of sulfate and flouride via snowfall between 10 January and 10 February is conservatively estimated to be 4.78 and 1.3 kg km -2, respectively.

  2. Chemical composition of water from roofs in Gdansk, Poland

    Energy Technology Data Exchange (ETDEWEB)

    Tsakovski, Stefan, E-mail: stsakovski@chem.uni-sofia.b [Chair of Physical Chemistry, Faculty of Chemistry, University of Sofia, J Bourchier Blvd. 1, 1164 Sofia (Bulgaria); Tobiszewski, Marek [Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology (GUT), 11/12 G. Narutowicza St., 80-952 Gdansk (Poland); Simeonov, Vasil, E-mail: vsimeonov@chem.uni-sofia.b [Chair of Analytical Chemistry, Faculty of Chemistry, University of Sofia, 1164 Sofia (Bulgaria); Polkowska, Zaneta [Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology (GUT), 11/12 G. Narutowicza St., 80-952 Gdansk (Poland); Namiesnik, Jacek, E-mail: chemanal@pg.gda.p [Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology (GUT), 11/12 G. Narutowicza St., 80-952 Gdansk (Poland)

    2010-01-15

    This study deals with the assessment of roof runoff waters from the region of Gdansk collected during the winter season (2007/2008). The chemical analysis includes 16 chemical variables: major ions, PAHs and PCBs measured at 3 sampling sites for 6-14 rain events. Although the data set is of limited volume the statistical data treatment using self-organizing maps (SOM) reveals the main factors controlling roof runoff water quality even for a data set with small dimension. This effort for explanation of the identified factors by the possible emission sources of the urban environment and air-particulate formation seems to be very reliable. Additionally to the roof runoff water quality factors the rain events patterns are found: 'background' group of events and groups formally named 'PAHs', 'PCBs' and 'air-borne particles' - dominated events. The SOM classification results give an opportunity to uncover the role of roof 'impact' on the runoff waters. Rain runoff water quality is described by four latent factors and the 'roof' impact is uncovered. - Identification of the urban roof runoff water quality factors and 'roof' impact by self-organizing map classification.

  3. Analysis of changes in the chemical composition of the blast furnace coke at high temperatures

    Directory of Open Access Journals (Sweden)

    A. Konstanciak

    2012-12-01

    Full Text Available Purpose: The main purpose of this paper was to analyze the behavior of coke in the blast furnace. The analysis of changes in chemical composition of coke due to impact of inert gas and air at different temperatures was made. The impact of the application of the thermoabrasion coefficient on the porosity of coke was also analyzed.Design/methodology/approach: By applying the Computer Thermochemical Database of the TERMO system (REAKTOR1 and REAKTOR3 three groups of substances can be distinguished. The chemical composition of blast furnace coke and the results of calculations of changes of chemical composition of coke heat treated under certain conditions were compared. The structural studies of these materials were presented.Findings: The results of the analysis of ash produced from one of Polish cokes was taken for consideration. This is not the average composition of Polish coke ashes, nevertheless it is representative of most commonly occurring chemical compositions.Practical implications: Thanks to the thermochemical calculations it is possible to predict ash composition after the treatment in a blast furnace. Those information was crucial and had an actual impact on determining the coke quality.Originality/value: Presentation of the analytical methods which, according to author, can be very useful to evaluate and identify the heat treatment for blast furnaces cokes. The research pursued represents part of a larger project carried out within the framework of Department Extraction and Recycling of Metals, Czestochowa University of Technology.

  4. Chemical composition and food uses of teff (Eragrostis tef).

    Science.gov (United States)

    Zhu, Fan

    2018-01-15

    Teff (Eragrostis tef) is a cereal native to Ethiopia and Eritrea. It has an excellent adaptability to harsh environmental conditions and plays an important role in food security. In recent years, teff is becoming globally popular due to the attractive nutritional profile such as gluten free and high dietary fiber content. This review documents the recent advances in the genetic diversity, nutritional composition and food uses of teff grain. The attractive nutrients of teff include protein, dietary fiber, polyphenols, and certain minerals. Whole grain teff flour becomes increasingly important in healthy food market, and has been used to produce various gluten free food items such as pasta and bread. Efforts have been made to enhance the sensory quality of teff based products. There is great potential to adapt teff to the other parts of the world for healthy food and beverage production. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Chemical composition and biological activities of the Agaricus mushrooms

    Directory of Open Access Journals (Sweden)

    L Munkhgerel

    2014-10-01

    Full Text Available Two species of Agaricus mushroom grown in Mongolia were analyzed for their element content. Biological activity and chemical components study of Agaricus, grown in the Mongolian flora has been investigated for the first time. The ethanol extracts of dried Agaricus sp. mushrooms were analyzed for antioxidant activity on 1,1-diphenyl-2- picrylhydrazyl (DPPH radicals and interferon-like activity. The ethanol extracts from Agaricus arvensis showed the most potent radical scavenging activity. The IC50 of A. silvaticus and A. arvensis were 216 and 17.75 g/ml respectively. Among the twenty three mushroom extracts, the extracts from A. silvatisus and A. arvensis have shown the interferon-like activity. DOI: http://dx.doi.org/10.5564/mjc.v14i0.197Mongolian Journal of Chemistry 14 (40, 2013, p41-45

  6. Chemical composition of umbu (Spondias tuberosa Arr. Cam seeds

    Directory of Open Access Journals (Sweden)

    Soraia Vilela Borges

    2007-02-01

    Full Text Available The umbu tree (Spondias tuberosa Arr. Cam is an important fruit tree the economy of the semi-arid northeastern region of Brazil. With the objective of finding use for the seeds, physical and chemical characterizations of the seeds from 2 cultivars in 2 maturation stages were carried out and their fatty acid and mineral profiles determined. The results showed no differences between the seeds analyzed. The yield was about 10% and the dimensions as follows: length from 1.48 to 2.11 cm and width from 0.76 to 1.16 cm. The average lipid content was 55% of which 69% was unsaturated and the average protein content was 24%. The seeds were a good source of the following minerals: P, K, Mg, Fe and Cu. The overall results indicated that the oil or the seeds could be used for food stuffs if no toxic agents were found.

  7. A New Reference Chemical Composition for TMC-1

    CERN Document Server

    Gratier, P; Ohishi, M; Roueff, E; Loison, J -C; Hickson, K M; Wakelam, V

    2016-01-01

    Recent detections of complex organic molecules in dark clouds have rekindled interest in the astrochemical modeling of these environments. Because of its relative closeness and rich molecular complexity, TMC-1 has been extensively observed to study the chemical processes taking place in dark clouds. We use local thermodynamical equilibrium radiative transfer modeling coupled with a Bayesian statistical method which takes into account outliers to analyze the data from the Nobeyama spectral survey of TMC-1 between 8 and 50 GHz. We compute the abundance relative to molecular hydrogen of 57 molecules, including 19 isotopologues in TMC-1 along with their associated uncertainty. The new results are in general agreement with previous abundance determination from Ohishi & Kaifu and the values reported in the review from Agundez & Wakelam. However, in some cases, large opacity and low signal to noise effects allow only upper or lower limits to be derived, respectively.

  8. A New Reference Chemical Composition for TMC-1

    Science.gov (United States)

    Gratier, P.; Majumdar, L.; Ohishi, M.; Roueff, E.; Loison, J. C.; Hickson, K. M.; Wakelam, V.

    2016-08-01

    Recent detections of complex organic molecules in dark clouds have rekindled interest in the astrochemical modeling of these environments. Because of its relative closeness and rich molecular complexity, TMC-1 has been extensively observed to study the chemical processes taking place in dark clouds. We use local thermodynamical equilibrium radiative transfer modeling coupled with a Bayesian statistical method which takes into account outliers to analyze the data from the Nobeyama spectral survey of TMC-1 between 8 and 50 GHz. We compute the abundance relative to molecular hydrogen of 57 molecules, including 19 isotopologues in TMC-1 along with their associated uncertainty. The new results are in general agreement with previous abundance determination from Ohishi & Kaifu and the values reported in the review from Agúndez & Wakelam. However, in some cases, large opacity and low signal to noise effects allow only upper or lower limits to be derived, respectively.

  9. CHEMICAL COMPOSITION AND ANTI-INFLAMMATORY ACTIVITY OF Roldana platanifolia

    Directory of Open Access Journals (Sweden)

    Amira Arciniegas

    2015-11-01

    Full Text Available The chemical study of Roldana platanifolia led to the isolation of β-caryophyllene, five eremophilanolides, chlorogenic acid, and a mixture of β-sitosterol-stigmasterol, β-sitosteryl glucopyranoside, and sucrose. The anti-inflammatory activities of the extracts and isolated products were tested using the 12-O-tetradecanoylphorbol-13-acetate (TPA model of induced acute inflammation. The acetone and methanol extracts showed dose dependent activities (ID50 0.21 and 0.32 mg/ear, respectively, while none of the isolated compounds exhibited relevant edema inhibition. The active extracts were also evaluated with the myeloperoxidase assay technique (MPO to determine their ability to prevent neutrophil infiltration. Results showed that the anti-inflammatory activity was related to the compound’s ability to inhibit pro-inflammatory mediators such as neutrophils.

  10. The CBS spectra investigation as method of the PN chemical composition analysis

    Science.gov (United States)

    Shimanskaya, N. N.; Bikmaev, I. F.; Shimansky, V. V.; Sakhibullin, N. A.; Zhuchkov, R. Ya.; Shigapov, R. R.

    2007-10-01

    We report the results of the investigations of chemical composition of close binaries which had gone through the stage of common envelope and which are the remnants of planetary nebular cores. High resolution spectra for different phases of orbital period of V471 Tau were taken by RTT-150 telescope and were investigated by the modified SYNTH program. The spectra show noticeable variability with an appearance of emission components dependent of the orbital period phase. For chemical composition determination, the "solar" oscillator strengths of 700 lines were determined. It was found that the chemical content of V471 Tau is a composite one and is characterized by excess of α-process elements in the contrast to small underabundance of iron-peak elements. An estimation of different element abundances in the star allows to determine their contents in planetary nebular phase.

  11. Indirect Determination of Chemical Composition and Fuel Characteristics of Solid Waste

    DEFF Research Database (Denmark)

    Riber, Christian; Christensen, Thomas Højlund

    Determination of chemical composition of solid waste can be performed directly or indirectly by analysis of combustion products. The indirect methodology instrumented by a full scale incinerator is the only method that can conclude on elements in trace concentrations. These elements are of great...... interest in evaluating waste management options by for example LCA modeling. A methodology description of indirect determination of chemical composition and fuel properties of waste is provided and validated by examples. Indirect analysis of different waste types shows that the chemical composition...... of toxic elements is shown exemplified by Hg. The average concentration is evaluated to be affected by three occurrences; background, rare items and very rare items (1/800 tonnes), that are all important to the Hg average concentration....

  12. Chemical Composition of Different Botanical Origin Honeys Produced by Sicilian Black Honeybees (Apis mellifera ssp. sicula).

    Science.gov (United States)

    Mannina, Luisa; Sobolev, Anatoly P; Di Lorenzo, Arianna; Vista, Silvia; Tenore, Gian Carlo; Daglia, Maria

    2015-07-01

    In 2008 a Slow Food Presidium was launched in Sicily (Italy) for an early warning of the risk of extinction of the Sicilian native breed of black honeybee (Apis mellifera L. ssp sicula). Today, the honey produced by these honeybees is the only Sicilian honey produced entirely by the black honeybees. In view of few available data regarding the chemical composition of A. mellifera ssp. sicula honeys, in the present investigation the chemical compositions of sulla honey (Hedysarum coronarium L.) and dill honey (Anethum graveolens L.) were studied with a multimethodological approach, which consists of HPLC-PDA-ESI-MSn and NMR spectroscopy. Moreover, three unifloral honeys (lemon honey (obtained from Citrus limon (L.) Osbeck), orange honey (Citrus arantium L.), and medlar honey (Eriobotrya japonica (Thunb.) Lindl)), with known phenol and polyphenol compositions, were studied with NMR spectroscopy to deepen the knowledge about sugar and amino acid compositions.

  13. Chemical composition of a sample of bright solar-metallicity stars

    CERN Document Server

    Caffau, E; Steffen, M; Bonifacio, P; Strassmeier, K G; Gallagher, A; Faraggiana, R; Sbordone, L

    2015-01-01

    We present a detailed analysis of seven young stars observed with the spectrograph SOPHIE at the Observatoire de Haute-Provence for which the chemical composition was incomplete or absent in the literature. For five stars, we derived the stellar parameters and chemical compositions using our automatic pipeline optimized for F, G, and K stars, while for the other two stars with high rotational velocity, we derived the stellar parameters by using other information (parallax), and performed a line-by-line analysis. Chromospheric emission-line fluxes from CaII are obtained for all targets. The stellar parameters we derive are generally in good agreement with what is available in the literature. We provide a chemical analysis of two of the stars for the first time. The star HIP 80124 shows a strong Li feature at 670.8 nm implying a high lithium abundance. Its chemical pattern is not consistent with it being a solar sibling, as has been suggested.

  14. Disentangling Hot Jupiters formation location from their chemical composition

    CERN Document Server

    Ali-Dib, Mohamad

    2016-01-01

    We use a population synthesis model that includes pebbles and gas accretion, planetary migration, and simplified chemistry scheme to study the formation of hot-Jupiters. Models have proposed that these planets can either originate beyond the snowline and then move inward via disk migration, or form "in-situ" inside the snowline. The goal of this work is to verify which of these two scenarios is more compatible with pebbles accretion, and if can we distinguish observationally between them via the resulting planetary C/O ratios and core masses. Our results show that, for solar system composition, the C/O ratios will vary but weakly between the two populations, since a significant amount of carbon and oxygen are locked up in refractories. In this case, we find a strong correlation between the carbon abundance and core mass. The C/O ratio variations are more pronounced in the case where we assume that all carbon and oxygen are in volatiles. On average, Hot-Jupiters forming "in-situ" inside the snowline will have ...

  15. Inorganic Chemical Composition of Swimming Pools in Amman-Jordan

    Directory of Open Access Journals (Sweden)

    Bety Saqarat

    2012-10-01

    Full Text Available Monitoring was carried out during summer 2011 in three types of swimming pools in Amman-Jordan. Thirty six water samples, collected from three users type of swimming pools (adults, family and infants, were examined for its major ionic composition (HCO3-, Cl-, NO3-, SO4=, Ca+2, Mg+2, Na+, K+ and PO4+4 in addition to its BOD and COD content. All of the examined samples from the swimming pools water were acceptable according to the local and WHO standards. The type and number of users as well as the maintenance of the swimming pool water influenced the water quality. The results showed that there was a noticeable increase in NO3, PO4 and Cl than other ions. All of the examined samples from the swimming pools water were acceptable according to the local and WHO standards and although the water of the infant’s users changed frequently, it showed the highest concentration of most of the parameters and Adults’ pool showed the lowest.

  16. Brazilian Red Propolis—Chemical Composition and Botanical Origin

    Directory of Open Access Journals (Sweden)

    Andreas Daugsch

    2008-01-01

    Full Text Available Propolis contains resinous substances collected by honey bees from various plant sources and has been used as a traditional folk medicine since ca 300 BC. Nowadays, the use of evidence-based complementary and alternative medicine (CAM is increasing rapidly and so is the use of propolis in order to treat or support the treatment of various diseases. Much attention has been focused on propolis from Populus sp. (Salicaceae and Baccharis dracunculifolia (Asteracea, but scientific information about the numerous other types of propolis is still sparse. We gathered six samples of red propolis in five states of Northeastern Brazil. The beehives were located near woody perennial shrubs along the sea and river shores. The bees were observed to collect red resinous exudates on Dalbergia ecastophyllum (L Taub. (Leguminosae to make propolis. The flavonoids of propolis and red resinous exudates were investigated using reversed-phase high-performance liquid chromatography and reversed-phase high-performance thin-layer chromatography. We conclude that the botanical origin of the reddish propolis is D. ecastophyllum. In areas where this source (D. ecastophyllum was scarce or missing, bees were collecting resinous material from other plants. Propolis, which contained the chemical constituents from the main botanical origin, showed higher antimicrobial activity.

  17. Conical intersection seams in polyenes derived from their chemical composition

    Energy Technology Data Exchange (ETDEWEB)

    Nenov, Artur; Vivie-Riedle, Regina de [Department Chemie, Ludwig-Maximilians-Univerisitaet, Muenchen Butenandtstr. 11, 81377 Muenchen (Germany)

    2012-08-21

    The knowledge of conical intersection seams is important to predict and explain the outcome of ultrafast reactions in photochemistry and photobiology. They define the energetic low-lying reachable regions that allow for the ultrafast non-radiative transitions. In complex molecules it is not straightforward to locate them. We present a systematic approach to predict conical intersection seams in multifunctionalized polyenes and their sensitivity to substituent effects. Included are seams that facilitate the photoreaction of interest as well as seams that open competing loss channels. The method is based on the extended two-electron two-orbital method [A. Nenov and R. de Vivie-Riedle, J. Chem. Phys. 135, 034304 (2011)]. It allows to extract the low-lying regions for non-radiative transitions, which are then divided into small linear segments. Rules of thumb are introduced to find the support points for these segments, which are then used in a linear interpolation scheme for a first estimation of the intersection seams. Quantum chemical optimization of the linear interpolated structures yields the final energetic position. We demonstrate our method for the example of the electrocyclic isomerization of trifluoromethyl-pyrrolylfulgide.

  18. Conical intersection seams in polyenes derived from their chemical composition

    Science.gov (United States)

    Nenov, Artur; de Vivie-Riedle, Regina

    2012-08-01

    The knowledge of conical intersection seams is important to predict and explain the outcome of ultrafast reactions in photochemistry and photobiology. They define the energetic low-lying reachable regions that allow for the ultrafast non-radiative transitions. In complex molecules it is not straightforward to locate them. We present a systematic approach to predict conical intersection seams in multifunctionalized polyenes and their sensitivity to substituent effects. Included are seams that facilitate the photoreaction of interest as well as seams that open competing loss channels. The method is based on the extended two-electron two-orbital method [A. Nenov and R. de Vivie-Riedle, J. Chem. Phys. 135, 034304 (2011)], 10.1063/1.3608924. It allows to extract the low-lying regions for non-radiative transitions, which are then divided into small linear segments. Rules of thumb are introduced to find the support points for these segments, which are then used in a linear interpolation scheme for a first estimation of the intersection seams. Quantum chemical optimization of the linear interpolated structures yields the final energetic position. We demonstrate our method for the example of the electrocyclic isomerization of trifluoromethyl-pyrrolylfulgide.

  19. CHEMICAL COMPOSITION OF EUCALIPT WOOD WITH DIFFERENT LEVELS OF THINNING

    Directory of Open Access Journals (Sweden)

    Antônio José Vinha Zanuncio

    2013-12-01

    Full Text Available http://dx.doi.org/10.5902/1980509812359The objective of this study was to evaluate different thinning regimes in forest plantations of eucalypt(Eucalyptus grandis x Eucalyptus urophylla clones to produce timber for cellulose and charcoal to verifywhether this effect could affect the proportion of the chemical components of wood. The average initialspacing between plants was 3x3 m and the treatments were: T1= control, T2, T3and T4 with thinning 20%,35% and 50% of the basal area, respectively. The results were analyzed by Tukey test at 5% probability.According to the results found the lignin content from treatment T4 was higher than that of the others; thegroups of uronic acids of the T1 was similar to all other treatments, but the levels of T2 and T4 differedbetween them. The extractives content of T1was similar to the T2 and T3 and lower than that of theT4; thecarbohydrates of T1 were similar to that of T3 and higher than the others. It was concluded that thinningincreases the quality of the wood to be used as energy purposes, such as charcoal production, but it did notincrease productivity for wood pulp and paper production.

  20. Characterization of biomass burning particles: chemical composition and processing

    Science.gov (United States)

    Hudson, P. K.; Murphy, D. M.; Cziczo, D. J.; Thomson, D. S.; Degouw, J.; Warneke, C.

    2003-12-01

    During the Intercontinental Transport and Chemical Transformation (ITCT) mission in April and May of 2002, a forest fire plume was intercepted over Utah on May 19. Gas phase species acetonitrile (CH3CN) (a biomass burning tracer) and carbon monoxide (CO) measured greater than five fold enhancements over background concentrations during this plume crossing. In the 100 sec plume crossing, the Particle Analysis by Laser Mass Spectrometry (PALMS) instrument acquired 202 positive mass spectra of biomass burning particles. Many of these particles contained potassium in addition to organics, carbon, and NO+ (which is a signature for any nitrogen containing compound such as ammonium or nitrate). From characterization of the particle mass spectra obtained during the plume crossing, a qualitative signature has been determined for identifying biomass burning particles. By applying this analysis to the entire ITCT mission, several transport events of smoke plumes have been identified and were confirmed by gas phase measurements. Additional species, such as sulfate, found in the mass spectra of the transported particles indicated processing or aging of the biomass burning particles that had taken place. The analysis has been extended to other field missions (Crystal-Face, ACCENT, and WAM) to identify biomass burning particles without the added benefit of gas phase measurements.

  1. Biomass-burning particle measurements: Characteristic composition and chemical processing

    Science.gov (United States)

    Hudson, Paula K.; Murphy, Daniel M.; Cziczo, Daniel J.; Thomson, David S.; de Gouw, Joost A.; Warneke, Carsten; Holloway, John; Jost, Hans-Jürg; Hübler, Gerd

    2004-12-01

    The NOAA Lockheed Orion WP-3D aircraft intercepted a forest fire plume over Utah on 19 May 2002 during the Intercontinental Transport and Chemical Transformation (ITCT) mission. Large enhancements in acetonitrile (CH3CN), carbon monoxide (CO) and particle number were measured during the fire plume interception. In the 100 s plume crossing, the Particle Analysis by Laser Mass Spectrometry (PALMS) instrument acquired 202 positive mass spectra from ionizing single particles in the 0.2-5 μm size range. These particles contained carbon, potassium, organics, and ammonium ions. No pure soot particles were sampled directly from the plume. By characterizing these particle mass spectra, a qualitative biomass-burning particle signature was developed that was then used to identify biomass-burning particles throughout ITCT. The analysis was extended to identify biomass-burning particles in four other missions, without the benefit of gas-phase biomass-burning tracers. During ITCT, approximately 33% of the particles sampled in the North American troposphere and 37% of the particles transported from Asia, not influenced by North American sources, were identified as biomass-burning particles. During the WB-57 Aerosol Mission (WAM), Atmospheric Chemistry of Combustion Emissions near the Tropopause (ACCENT) and ACCENT 2000 missions, 7% of stratospheric particles were identified as biomass-burning particles. During the Cirrus Regional Study of Tropical Anvils and Cirrus Layers - Florida Area Cirrus Experiment (CRYSTAL-FACE) this percentage increased to 52% because the regional stratosphere was strongly affected by an active fire season.

  2. Application of chemical vapor composites (CVC) to terrestrial thermionics

    Science.gov (United States)

    Miskolczy, Gabor; Reagan, Peter

    1995-01-01

    Terrestrial flame fired thermionics took a great leap forward in the earlier 1980's with the development of reliable long-lived hot shells. These results were presented by Goodale (1981). The hot shell protects the fractory emitter from oxidizing in the combustion environment. In earlier efforts with supralloys emitters it was found that superalloys were poor thermionic emitters since they operated at too low a temperature for practical and economical use as discussed by Huffman (1978). With the development of Chemical Vapor Deposited (CVD) silicon carbide and CVD tungsten, it became possible to fabricate long-lived thermionic converters. These results were shown by Goodale (1980). Further improvements were achieved with the use of oxygen additives on the electrodes. These developments made thermionics attractive for topping a power plant or as the energy conversion part of a cogeneration plant as described by Miskolczy (1982) and Goodale (1983). The feasibility of a thermonic steam boiler and a thermionic topped gas turbine plant become a possibility, as shown by Miskolczy (1980).

  3. The chemical composition of Galactic ring nebulae around massive stars

    CERN Document Server

    Esteban, C; Morisset, C; Garcia-Rojas, J

    2016-01-01

    We present deep spectra of ring nebulae associated with Wolf-Rayet (WR) and O-type stars: NGC 6888, G2.4+1.4, RCW 58, S 308, NGC 7635 and RCW 52. The data have been taken with the 10m Gran Telescopio Canarias and the 6.5m Clay Telescope. We extract spectra of several apertures in some of the objects. We derive C$^{++}$ and O$^{++}$ abundances from faint recombination lines in NGC 6888 and NGC 7635, permitting to derive their C/H and C/O ratios and estimate the abundance discrepancy factor (ADF) of O$^{++}$. The ADFs are larger than the typical ones of normal HII regions but similar to those found in the ionised gas of star-forming dwarf galaxies. We find that chemical abundances are rather homogeneous in the nebulae where we have spectra of several apertures: NGC 6888, NGC 7635 and G2.4+1.4. We obtain very high values of electron temperature in a peripheral zone of NGC 6888, finding that shock excitation can reproduce its spectral properties. We find that all the objects associated with WR stars show N enrich...

  4. Brazilian red propolis--chemical composition and botanical origin.

    Science.gov (United States)

    Daugsch, Andreas; Moraes, Cleber S; Fort, Patricia; Park, Yong K

    2008-12-01

    Propolis contains resinous substances collected by honey bees from various plant sources and has been used as a traditional folk medicine since ca 300 BC. Nowadays, the use of evidence-based complementary and alternative medicine (CAM) is increasing rapidly and so is the use of propolis in order to treat or support the treatment of various diseases. Much attention has been focused on propolis from Populus sp. (Salicaceae) and Baccharis dracunculifolia (Asteracea), but scientific information about the numerous other types of propolis is still sparse. We gathered six samples of red propolis in five states of Northeastern Brazil. The beehives were located near woody perennial shrubs along the sea and river shores. The bees were observed to collect red resinous exudates on Dalbergia ecastophyllum (L) Taub. (Leguminosae) to make propolis. The flavonoids of propolis and red resinous exudates were investigated using reversed-phase high-performance liquid chromatography and reversed-phase high-performance thin-layer chromatography. We conclude that the botanical origin of the reddish propolis is D. ecastophyllum. In areas where this source (D. ecastophyllum) was scarce or missing, bees were collecting resinous material from other plants. Propolis, which contained the chemical constituents from the main botanical origin, showed higher antimicrobial activity.

  5. Antimicrobial, antioxidant activities and chemical composition of selected Thai spices

    Directory of Open Access Journals (Sweden)

    Juraithip Wungsintaweekul

    2010-12-01

    Full Text Available Nine volatile oils and six methanol extracts from Ocimum americanum, O. basilicum, O. sanctum, Citrus hystrix,Alpinia galanga, Curcuma zedoaria, Kaempferia parviflora and Zingiber cassumunar were assessed for antimicrobial andantioxidant activities. The volatile oils and extracts were investigated against eight bacteria and three fungi. The resultsillustrated that O. americanum volatile oil exhibited broad spectrum activity against tested bacteria with the MICs ranging1.4-3.6 mg/ml and Candida spp. with the MICs ranging from 0.5-0.6 mg/ml. The O. sanctum volatile oil showed a considerableactivity against only Candida spp. with the MICs ranging from 0.8-1.4 mg/ml. Interestingly, growth of Mycobacteriumphlei was inhibited by the volatiles of O. americanum, C. hystrix peel, and C. zedoaria with MIC of 1.7, 3.5 and 1.2 mg/ml,respectively. For antioxidant activity evaluation, the methanol extracts of C. hystrix (leaf and peel and K. parviflora hadpotent antioxidant activity by the radical-scavenging DPPH method with IC50 of 24.6, 66.3 and 61.5 mg/ml, respectively.GC-MS analysis revealed the typical chemical profiles of the volatile oils. The major component showed the characteristicsof the volatile oils and was probably responsible for the antimicrobial effect.

  6. Structure of the chondrules and the chemical composition of olivine in meteorite Jesenice

    Directory of Open Access Journals (Sweden)

    Bojan Ambrožič

    2013-06-01

    Full Text Available This paper presents a mineralogical analysis of various chondrule types and chemical analysis of olivine indifferent parts of meteorite Jesenice. Quantitative energy-dispersive X-ray spectroscopy with a scanning electronmicroscope was used in the analyses. The results showed that the chemical composition of the olivine was homogeneousthroughout the meteorite with an average olivine composition of Fa 26.4 ± 0.6. The results of this study werein agreement with previous study of the meteorite, which showed that the meteorite Jesenice was an equilibratedL chondrite.

  7. Chemical composition of Melicope belahe (Baill.) T. G. Hartley (Rutaceae) leaf essential oil from Madagascar.

    Science.gov (United States)

    Rabehaja, Delphin J R; Garcia, Gabriel; Charmillon, Julie-Marie; Désiré, Odile; Paoli, Mathieu; Ramanoelina, Panja A R; Tomi, Félix

    2017-01-01

    Melicope belahe (Baill.) T.G. Hartley (Rutaceae) is an endemic species to Madagascar. The chemical composition of leaf essential oil is reported for the first time. A sample was extracted by hydrodistillation and analysis was carried out by combination of chromatographic (GC), spectroscopic and spectrometric (MS, (13)C NMR) techniques. In total, 56 compounds have been identified. The chemical composition was dominated by α-pinene (42.6%) followed by linalool (6.2%) and (E)-β-caryophyllene (5.2%).

  8. Essential Oils from Thyme (Thymus vulgaris): Chemical Composition and Biological Effects in Mouse Model.

    Science.gov (United States)

    Vetvicka, Vaclav; Vetvickova, Jana

    2016-12-01

    Thymus species are popular spices and contain volatile oils as main chemical constituents. Recently, plant-derived essential oils are gaining significant attention due to their significant biological activities. Seven different thymus-derived essential oils were compared in our study. First, we focused on their chemical composition, which was followed up by testing their effects on phagocytosis, cytokine production, chemotaxis, edema inhibition, and liver protection. We found limited biological activities among tested oils, with no correlation between composition and biological effects. Similarly, no oils were effective in every reaction. Based on our data, the tested biological use of these essential oils is questionable.

  9. The chemical composition and biological properties of coconut (Cocos nucifera L.) water.

    Science.gov (United States)

    Yong, Jean W H; Ge, Liya; Ng, Yan Fei; Tan, Swee Ngin

    2009-12-09

    Coconut water (coconut liquid endosperm), with its many applications, is one of the world's most versatile natural product. This refreshing beverage is consumed worldwide as it is nutritious and beneficial for health. There is increasing scientific evidence that supports the role of coconut water in health and medicinal applications. Coconut water is traditionally used as a growth supplement in plant tissue culture/micropropagation. The wide applications of coconut water can be justified by its unique chemical composition of sugars, vitamins, minerals, amino acids and phytohormones. This review attempts to summarise and evaluate the chemical composition and biological properties of coconut water.

  10. Chemical composition of inks of diverse marine molluscs suggests convergent chemical defenses.

    Science.gov (United States)

    Derby, Charles D; Kicklighter, Cynthia E; Johnson, P M; Zhang, Xu

    2007-05-01

    Some marine molluscs, notably sea hares, cuttlefish, squid, and octopus, release ink when attacked by predators. The sea hare Aplysia californica releases secretions from the ink gland and opaline gland that protect individuals from injury or death from predatory spiny lobsters through a combination of mechanisms that include chemical deterrence, sensory disruption, and phagomimicry. The latter two mechanisms are facilitated by millimolar concentrations of free amino acids (FAA) in sea hare ink and opaline, which stimulate the chemosensory systems of predators, ultimately leading to escape by sea hares. We hypothesize that other inking molluscs use sensory disruption and/or phagomimicry as a chemical defense. To investigate this, we examined concentrations of 21 FAA and ammonium in the defensive secretions of nine species of inking molluscs: three sea hares (Aplysia californica, Aplysia dactylomela, Aplysia juliana) and six cephalopods (cuttlefish: Sepia officinalis; squid: Loligo pealei, Lolliguncula brevis, Dosidicus gigas; octopus: Octopus vulgaris, Octopus bimaculoides). We found millimolar levels of total FAA and ammonium in these secretions, and the FAA in highest concentration were taurine, aspartic acid, glutamic acid, alanine, and lysine. Crustaceans and fish, which are major predators of these molluscs, have specific receptor systems for these FAA. Our chemical analysis supports the hypothesis that inking molluscs have the potential to use sensory disruption and/or phagomimicry as a chemical defense.

  11. Chemical Composition Variability of Essential Oils of Daucus gracilis Steinh. from Algeria.

    Science.gov (United States)

    Benyelles, Batoul; Allali, Hocine; El Amine Dib, Mohamed; Djabou, Nassim; Paolini, Julien; Costa, Jean

    2017-02-17

    The chemical compositions of 20 Algerian Daucus gracilis essential oils were investigated using GC-FID, GC/MS, and NMR analyses. Altogether, 47 compounds were identified, accounting for 90-99% of the total oil compositions. The main components were linalool (18; 12.5-22.6%), 2-methylbutyl 2-methylbutyrate (20; 9.2-20.2%), 2-methylbutyl isobutyrate (10; 4.2-12.2%), ammimajane (47; 2.6-37.1%), (E)-β-ocimene (15; 0.2-12.8%) and 3-methylbutyl isovalerate (19; 3.3-9.6%). The chemical composition of the essential oils obtained from separate organs was also studied. GC and GC/MS analysis of D. gracilis leaves and flowers allowed identifying 47 compounds, amounting to 92.3% and 94.1% of total oil composition, respectively. GC and GC/MS analysis of D. gracilis leaf and flower oils allowed identifying linalool (22.7%), 2-methylbutyl 2-methylbutyrate (18.9%), 2-methylbutyl isovalerate (13.6%), ammimajane (10.4%), 3-methylbutyl isovalerate (10.3%), (E)-β-ocimene (8.4%) and isopentyl 2-methylbutyrate (8.1%) as main components. The chemical variability of the Algerian oil samples was studied using statistical analysis, which allowed the discrimination of three main Groups. A direct correlation between the altitudes, nature of soils and the chemical compositions of the D. gracilis essential oils was evidenced. This article is protected by copyright. All rights reserved.

  12. Physico-Chemical, Functional and Rheological Characterization of Biodegradable Pellets and Composite Sheets

    OpenAIRE

    Jan Kulsum; Jan Shumaila; Riar CS; Saxena DC

    2016-01-01

    Deoiled rice bran, paddy husk, cashew nut shell liquid and glycerol were extruded into pellets and further pressed into composites. Processing and plasticizer type had significant effect on physico-chemical, functional, rheological and morphological properties of pellets and composites. Specific mechanical energy of the pellets containing cashew nut shell liquid as plasticizer was higher than those containing glycerol. The maximum hardness and bulk density were obtained for pellets prepared f...

  13. Milk yield and chemical composition of sheep milk in Srednostaroplaninska and Tetevenska breeds

    OpenAIRE

    Gerchev G.; Mihaylova G.

    2012-01-01

    The study was conducted from April to July on pastures located at different altitudes and of different sward composition during the milking period of Srednostaroplaninska and Tetevenska sheep. Morning bulk milk was sampled for analysis monthly between April and end of July. The purpose of the study was to establish the milk yield and to investigate the chemical composition of sheep milk obtained from Srednostaroplaninska and Tetevenska breeds reared on past...

  14. Antioxidant capacity and chemical composition in seeds rich in omega-3: chia, flax, and perilla

    OpenAIRE

    Sheisa Cyléia Sargi; Beatriz Costa Silva; Hevelyse Munise Celestino Santos; Paula Fernandes Montanher; Joana Schuelter Boeing; Oscar Oliveira Santos Júnior; Nilson Evelázio de Souza; Jesuí Vergílio Visentainer

    2013-01-01

    The chemical composition and antioxidant capacity of five seeds, chia, golden flax, brown flax, white perilla, and brown perilla, were determined. The chemical properties analyzed included moisture, ash, crude protein, carbohydrates, total lipids, fatty acids, and antioxidant capacity (ABTS•+, DPPH•, and FRAP). The results showed the highest amounts of protein and total lipids in brown and white perilla. Perilla and chia showed higher amounts of alpha-linolenic fatty acid than those of flaxse...

  15. Chemical composition of phenols from tars produced in semicoking of lignite from the near Moscow fields

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, V.V.; Proskuryakov, V.A.; Manuel, A.; Nechaeva, E.A. [Lev Tolstoi State Pedagogical University, Tula (Russian Federation)

    1998-10-01

    The chemical composition of phenols from semicoking tar produced in low-temperature carbonization of lignite from the near-Moscow fields was studied by elemental, chemical functional, emission spectral, and structural-group analyses, cryoscopy, IR, UV and {sup 1}H, and {sup 13}C NMR spectroscopy, capillary gas chromatography, and gas chromatography-mass spectrometry. A scheme was developed for adsorption liquid chromatography of phenols.

  16. Chemical composition of organic bases from semicoking tar of lignites from the near-Moscow fields

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, V.V.; Proskuryakov, V.A.; Polovetskaya, O.S. [Lev Tolstoi State Pedagogical University, Tula (Russian Federation)

    1999-02-01

    The chemical composition of organic bases from the semicoking tar of lignite from the near-Moscow fields was studied in detail by chemical functional, emission spectrum, and structural-group analyses, LR, UV and {sup 1}H and {sup 13}C NMR spectroscopy, cryoscopy, capillary gas chromatography, and chromatography-mass spectrometry. A scheme was developed for separation of the organic bases by adsorption liquid chromatography.

  17. Hanford enhanced waste glass characterization. Influence of composition on chemical durability

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-06-01

    This report provides a review of the complete high-level waste (HLW) and low-activity waste (LAW) data sets for the glasses recently fabricated at Pacific Northwest National Laboratory and characterized at Savannah River National Laboratory (SRNL). The review is from the perspective of relating the chemical durability performance to the compositions of these study glasses, since the characterization work at SRNL focused on chemical analysis and ASTM Product Consistency Test (PCT) performance.

  18. Inorganic chemical composition and chemical reactivity of settled dust generated by the World Trade Center building collapse: Chapter 12

    Science.gov (United States)

    Plumlee, Geoffrey S.; Hageman, Philip L.; Lamothe, Paul J.; Ziegler, Thomas L.; Meeker, Gregory P.; Theodorakos, Peter M.; Brownfield, Isabelle; Adams, Monique G.; Swayze, Gregg A.; Hoefen, Todd M.; Taggart, Joseph E.; Clark, Roger N.; Wilson, S.; Sutley, Stephen J.

    2009-01-01

    Samples of dust deposited around lower Manhattan by the September 11, 2001, World Trade Center (WTC) collapse have inorganic chemical compositions that result in part from the variable chemical contributions of concrete, gypsum wallboard, glass fibers, window glass, and other materials contained in the buildings. The dust deposits were also modified chemically by variable interactions with rain water or water used in street washing and fire fighting. Chemical leach tests using deionized water as the extraction fluid show the dust samples can be quite alkaline, due primarily to reactions with calcium hydroxide in concrete particles. Calcium and sulfate are the most soluble components in the dust, but many other elements are also readily leached, including metals such as Al, Sb, Mo Cr, Cu, and Zn. Indoor dust samples produce leachates with higher pH, alkalinity, and dissolved solids than outdoor dust samples, suggesting most outdoor dust had reacted with water and atmospheric carbon dioxide prior to sample collection. Leach tests using simulated lung fluids as the extracting fluid suggest that the dust might also be quite reactive in fluids lining the respiratory tract, resulting in dissolution of some particles and possible precipitation of new phases such as phosphates, carbonates, and silicates. Results of these chemical characterization studies can be used by health scientists as they continue to track and interpret health effects resulting from the short-term exposure to the initial dust cloud and the longer-term exposure to dusts resuspended during cleanup.

  19. Inorganic chemical composition and chemical reactivity of settled dust generated by the World Trade Center building collapse

    Science.gov (United States)

    Plumlee, Geoffrey S.; Hageman, Philip L.; Lamothe, Paul J.; Ziegler, Thomas L.; Meeker, Gregory P.; Theodorakos, Peter M.; Brownfield, Isabelle; Adams, Monique G.; Swayze, Gregg A.; Hoefen, Todd M.; Taggart, Joseph E.; Clark, Roger N.; Wilson, S.; Sutley, Stephen J.

    2009-01-01

    Samples of dust deposited around lower Manhattan by the September 11, 2001, World Trade Center (WTC) collapse have inorganic chemical compositions that result in part from the variable chemical contributions of concrete, gypsum wallboard, glass fibers, window glass, and other materials contained in the buildings. The dust deposits were also modified chemically by variable interactions with rain water or water used in street washing and fire fighting. Chemical leach tests using deionized water as the extraction fluid show the dust samples can be quite alkaline, due primarily to reactions with calcium hydroxide in concrete particles. Calcium and sulfate are the most soluble components in the dust, but many other elements are also readily leached, including metals such as Al, Sb, Mo Cr, Cu, and Zn. Indoor dust samples produce leachates with higher pH, alkalinity, and dissolved solids than outdoor dust samples, suggesting most outdoor dust had reacted with water and atmospheric carbon dioxide prior to sample collection. Leach tests using simulated lung fluids as the extracting fluid suggest that the dust might also be quite reactive in fluids lining the respiratory tract, resulting in dissolution of some particles and possible precipitation of new phases such as phosphates, carbonates, and silicates. Results of these chemical characterization studies can be used by health scientists as they continue to track and interpret health effects resulting from the short-term exposure to the initial dust cloud and the longer-term exposure to dusts resuspended during cleanup.

  20. NGC 6388: Chemical Composition of Its Eight Cool Giants

    Science.gov (United States)

    Wallerstein, G.; Kovtyukh, V. V.; Andrievsky, S. M.

    2007-04-01

    Eight cool giants in the unusual globular cluster NGC 6388 have been investigated in order to derive their elemental abundances. Effective temperatures from 3500 to 3850 K were derived using the method of line-depth ratios. Surface gravities were derived in two ways. Spectroscopic gravities, derived by the requirement that the abundance of iron be the same from Fe I and Fe II lines, were rather low, ranging from -0.3 to 0.0. Photometric gravities, derived from the assumed stellar mass of 0.7 Modot and the luminosity and Teff of the stars, fell between +0.25 and +0.70. Mean [Fe/H] values were -0.8 for spectroscopic gravities and -0.6 for photometric gravities. A test using spectra of the same resolution of the two coolest red giants in the globular cluster M4 obtained at the Apache Point Observatory were analyzed for comparison with the definitive analysis of Ivans et al. (1999). The very cool metal-poor red giant HD 232078 was also analyzed for comparison with the analysis of Gonzalez & Wallerstein (1998). Both comparisons showed that our methods yield the same abundance scale as previous works. We have compared the composition of stars in NGC 6388 with those of K giants with similar [Fe/H] in 47 Tuc and the Galactic bulge. The observed value of [O/Fe] is near zero, which is less than in 47 Tuc and bulge stars of similar metallicity. The α-elements behave similarly to oxygen and show only small excesses at about the same level as do the α-elements in the globular clusters associated with the Sgr system. It is unclear whether these differences are responsible for the unusual color-magnitude diagram of NGC 6388.

  1. Chemical composition of nuts and seeds sold in Korea.

    Science.gov (United States)

    Chung, Keun Hee; Shin, Kyung Ok; Hwang, Hyo Jeong; Choi, Kyung-Soon

    2013-04-01

    Eleven types of nuts and seeds were analyzed to determine their energy (326-733 mg), moisture (1.6-18.3 mg), carbohydrate (8.8-70.9 mg), protein (4.9-30.5 mg), lipid (2.5-69.8 mg), and ash (1.2-5.5 mg) contents per 100 g of sample. Energy content was highest in pine nuts (733 mg/100 g), carbohydrate level was highest in dried figs (70.9 mg/100 g) and protein was highest in peanuts (30.5 mg/100 g). The amino acid compositions of nuts and seeds were characterized by the dominance of hydrophobic (range = 1,348.6-10,284.6 mg), hydrophilic (range = 341.1-3,244.3 mg), acidic (range = 956.1-8,426.5 mg), and basic (range = 408.6-4,738.5 mg) amino acids. Monounsaturated fatty acids (MUFA) were highest in macadamia nuts (81.3%), whereas polyunsaturated fatty acids (PUFA) were highest in the walnuts (76.7%). Macadamia nuts did not contain any vitamin E, whereas sunflower seeds contained the highest level (60.3 mg/kg). Iron (Fe) content was highest in pumpkin seeds (95.85 ± 33.01 ppm), zinc (Zn) content was highest in pistachios (67.24 ± 30.25 ppm), copper (Cu) content was greatest in walnuts (25.45 ± 21.51 ppm), and lead (Pb) content was greatest in wheat nuts (25.49 ± 4.64 ppm), significantly (P < 0.05). In conclusion, current commercial nuts and seeds have no safety concerns, although further analysis of Pb contents is necessary to ensure safety.

  2. On a question of Gross

    Science.gov (United States)

    Banerjee, Abhijit

    2007-03-01

    Using the notion of weighted sharing of sets we prove two uniqueness theorems which improve the results proved by Fang and Qiu [H. Qiu, M. Fang, A unicity theorem for meromorphic functions, Bull. Malaysian Math. Sci. Soc. 25 (2002) 31-38], Lahiri and Banerjee [I. Lahiri, A. Banerjee, Uniqueness of meromorphic functions with deficient poles, Kyungpook Math. J. 44 (2004) 575-584] and Yi and Lin [H.X. Yi, W.C. Lin, Uniqueness theorems concerning a question of Gross, Proc. Japan Acad. Ser. A 80 (2004) 136-140] and thus provide an answer to the question of Gross [F. Gross, Factorization of meromorphic functions and some open problems, in: Proc. Conf. Univ. Kentucky, Lexington, KY, 1976, in: Lecture Notes in Math., vol. 599, Springer, Berlin, 1977, pp. 51-69], under a weaker hypothesis.

  3. Chemical composition of atmospheric aerosols between Moscow and Vladivostok

    Directory of Open Access Journals (Sweden)

    S. Kuokka

    2007-05-01

    Full Text Available The TROICA-9 expedition (Trans-Siberian Observations Into the Chemistry of the Atmosphere was carried out at the Trans-Siberian railway between Moscow and Vladivostok in October 2005. Measurements of aerosol physical and chemical properties were made from an observatory carriage connected to a passenger train. Black carbon (BC concentrations in fine particles (PM2.5, aerodynamic diameter <2.5 μm were measured with an aethalometer using a five-minute time resolution. Concentrations of inorganic ions and some organic compounds (Cl, NO3, SO42−, Na+, NH4+, K+, Ca2+, Mg2+, oxalate and methane sulphonate were measured continuously by using an on-line system with a 15-min time resolution. In addition, particle volume size distributions were determined for particles in the diameter range 3–850 nm using a 10-min. time resolution. The continuous measurements were completed with 24-h. PM2.5 filter samples which were stored in a refrigerator and later analyzed in chemical laboratory. The analyses included mass concentrations of PM2.5, ions, monosaccharide anhydrides (levoglucosan, galactosan and mannosan and trace elements (Al, As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb, V and Zn. The mass concentrations of PM2.5 varied in the range of 4.3–34.8 μg m−3 with an average of 21.6 μg m−3. Fine particle mass consisted mainly of BC (average 27.6%, SO42− (13.0%, NH4+ (4.1%, and NO3 (1.4%. One of the major constituents was obviously also organic carbon which was not determined. The contribution of BC was high compared with other studies made in Europe and Asia. High concentrations of ions, BC and particle volume were observed between Moscow and roughly 4000 km east of it, as well as close to

  4. Pulsed plasma chemical synthesis of SixCyOz composite nanopowder

    Science.gov (United States)

    Kholodnaya, G.; Sazonov, R.; Ponomarev, D.; Remnev, G.

    2017-05-01

    SixCyOz composite nanopowder with an average size of particles about 10-50 nm was produced using the pulsed plasma chemical method. The experiments on the synthesis of nanosized composite were carried out using a TEA-500 pulsed electron accelerator. To produce a composite, SiCl4, O2, and CH4 were used. The major part of experiments was conducted using a plasma chemical reactor (quartz, 140 mm diameter, 6 l volume). The initial reagents were injected into the reactor, then a pulsed electron beam was injected which initiated the chemical reactions whose products were the SixCyOz composite nanopowder. To define the morphology of the particles, the JEOL-II-100 transmission electron microscope (TEM) with an accelerating voltage of 100 kV was used. The substances in the composition of the composite nanopowder were identified using the infrared absorption optical spectrum. To conduct this analysis, the Nicolet 5700 FT-IR spectrometer was used.

  5. Chemical composition and antioxidant activity of certain Morus species.

    Science.gov (United States)

    Imran, Mohammad; Khan, Hamayun; Shah, Mohibullah; Khan, Rasool; Khan, Faridullah

    2010-12-01

    In the present work, the fruits of four Morus species, namely Morus alba (white mulberry), Morus nigra (black mulberry), Morus laevigata (large white fruit), and Morus laevigata (large black fruit), were analyzed for proximate composition, essential minerals, and antioxidant potentials. For this purpose, the ripe fruits were collected from the northern regions of Pakistan. The major nutritional components (moisture, ash, lipids, proteins, fibres, carbohydrates, and total sugar) were found to be in the suitable range along with good computed energy. Total dry weight, pH, and titratable acidity (percent citric acid) were (17.60±1.94)-(21.97±2.34) mg/100 g, (3.20±0.07)-(4.78±0.15), and (0.84±0.40)%-(2.00±0.08)%, respectively. Low riboflavin (vitamin B(2)) and niacin (vitamin B(3)) contents were recorded in all the fruits, while ascorbic acid (vitamin C) was in the range from (15.20±1.25) to (17.03±1.71) mg/100 g fresh weight (FW). The mulberry fruits were rich with regard to the total phenol and alkaloid contents, having values of (880±7.20)-(1650±12.25) mg/100 g FW and (390±3.22)-(660±5.25) mg/100 g FW, respectively. Sufficient quantities of essential macro-(K, Ca, Mg, and Na) and micro-(Fe, Zn, and Ni) elements were found in all the fruits. K was the predominant element with concentration ranging from (1270±9.36) to (1731±11.50) mg/100 g, while Ca, Na, and Mg contents were (440±3.21)-(576±7.37), (260±3.86)-(280±3.50), and (240±3.51)-(360±4.20) mg/100 g, respectivly. The decreasing order of micro-minerals was Fe>Zn>Ni. The radical scavenging activity of methanolic extract of fruits was concentration-dependent and showed a correlation with total phenolic constituents of the respective fruits. Based on the results obtained, mulberry fruits were found to serve as a potential source of food diet and natural antioxidants.

  6. 基于广义似然比法的化工非线性动态过程过失误差侦破%Gross Errors Detection for Nonlinear Dynamic Chemical Process Based on Generalized Likelihood Ratios

    Institute of Scientific and Technical Information of China (English)

    王莉; 金思毅; 黄兆杰

    2013-01-01

    广义似然比法(GLR)是一种有效适用于线性稳态化工过程的过失误差侦破方法.通过将动态化工数据协调模型中的微分约束和代数约束转化为矩阵形式和非线性约束线性化方法,成功将GLR应用到连续搅拌釜(CSTR)非线性动态系统中,同时计算了GLR在该系统中的过失误差侦破性能.统计结果表明,GLR的过失误差侦破率与过失误差大小和窗口长度有关:侦破率随过失误差增大而增大,随窗口长度增大而增大.%Generalized likelihood ratios (GLR) is an effective gross errors detection method for linear steady data reconciliation.In the paper,the differential constraints and algebraic constraints of dynamic data reconciliation model were transformed into the form of matrix,and the nonlinear constraints were linearized.Based on the two methods,GLR was successfully applied to a continuous stirred tank reactor (CSTR) system.The performance of gross errors detection of GLR in the nonlinear dynamic system was also calculated.Statistic results show that gross error detection rate relates to the size of gross error and the length of moving window.With the increase of gross error,the detection rate is improved; with the increase of length of moving window,the detection rate is also improved.

  7. [Application of near infrared reflectance spectroscopy to predict meat chemical compositions: a review].

    Science.gov (United States)

    Tao, Lin-Li; Yang, Xiu-Juan; Deng, Jun-Ming; Zhang, Xi

    2013-11-01

    In contrast to conventional methods for the determination of meat chemical composition, near infrared reflectance spectroscopy enables rapid, simple, secure and simultaneous assessment of numerous meat properties. The present review focuses on the use of near infrared reflectance spectroscopy to predict meat chemical compositions. The potential of near infrared reflectance spectroscopy to predict crude protein, intramuscular fat, fatty acid, moisture, ash, myoglobin and collagen of beef, pork, chicken and lamb is reviewed. This paper discusses existing questions and reasons in the current research. According to the published results, although published results vary considerably, they suggest that near-infrared reflectance spectroscopy shows a great potential to replace the expensive and time-consuming chemical analysis of meat composition. In particular, under commercial conditions where simultaneous measurements of different chemical components are required, near infrared reflectance spectroscopy is expected to be the method of choice. The majority of studies selected feature-related wavelengths using principal components regression, developed the calibration model using partial least squares and modified partial least squares, and estimated the prediction accuracy by means of cross-validation using the same sample set previously used for the calibration. Meat fatty acid composition predicted by near-infrared spectroscopy and non-destructive prediction and visualization of chemical composition in meat using near-infrared hyperspectral imaging and multivariate regression are the hot studying field now. On the other hand, near infrared reflectance spectroscopy shows great difference for predicting different attributes of meat quality which are closely related to the selection of calibration sample set, preprocessing of near-infrared spectroscopy and modeling approach. Sample preparation also has an important effect on the reliability of NIR prediction; in particular

  8. Thermo-chemical simulation of a composite offshore vertical axis wind turbine blade

    DEFF Research Database (Denmark)

    Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri

    2012-01-01

    In the present study three dimensional steady state thermo-chemical simulation of a pultrusion process is investigated by using the finite element/nodal control volume (FE/NCV) technique. Pultrusion simulation of a composite having a C-shaped cross section is performed as a validation case...

  9. A survey on the microbiological and chemical composition of buffalo milk in China

    NARCIS (Netherlands)

    Han, B.Z.; Meng, Y.; Li, M.; Yang, Y.; Ren, F.; Zeng, Q.; Nout, M.J.R.

    2007-01-01

    One hundred and twelve samples of raw buffalo milk were collected at four locations in China, and their microbiological and chemical composition was analyzed. Average levels of major components were: fat 7.59% (v/v), crude protein 4.86% (w/w), lactose 4.74% (w/w), total solids 18.44% (w/w), ash 0.85

  10. Chemical composition of hydrocarbons from semicoking tars of lignites from the near-Moscow fields

    Energy Technology Data Exchange (ETDEWEB)

    Platonov, V.V.; Proskuryakov, V.A.; Antonio, T.Z.; Platonova, M.V. [Lev Tolstoi Pedagogical University, Tula (Russian Federation)

    1998-09-01

    The chemical composition of hydrocarbons from the semicoking tar of lignites was studied by elemental, functional, emission spectrum, and structural-group analyses, cryoscopy, IR, UV and {sup 1}H and {sup 13}C NMR spectroscopy, capillary gas chromatography, and gas chromatography-mass spectrometry. A scheme was developed for adsorption liquid chromatography of the hydrocarbons.

  11. Numerical modeling of a compositional flow for chemical EOR and its stability analysis

    NARCIS (Netherlands)

    Druetta, P.; Yue, J.; Tesi, P.; De Persis, C.; Picchioni, F.

    A new two-dimensional surfactant flooding simulator for a three-component (water, petroleum, chemical), two-phase (aqueous, oleous) system in porous media is developed and analyzed. The compositional physical model is governed by a system of non-linear partial differential equations composed of

  12. Discerning the Chemical Composition and Mutagenic Effects of Soy Biodiesel PM

    Science.gov (United States)

    Discerning the Chemical Composition and Mutagenic Effects of Soy Biodiesel PM David G. Nashab, Esra Mutluc, William T. Prestond, Michael D. Haysb, Sarah H. Warrenc, Charly Kingc, William P. Linakb, M. lan Gilmourc, and David M. DeMarinic aOak Ridge Institute for Science and Ed...

  13. Determination of the chemical composition of human renal stones with MDCT: influence of the surrounding media

    Science.gov (United States)

    Grosjean, Romain; Sauer, Benoît; Guerra, Rui; Kermarrec, Isabelle; Ponvianne, Yannick; Winninger, Daniel; Daudon, Michel; Blum, Alain; Felblinger, Jacques; Hubert, Jacques

    2007-03-01

    The selection of the optimal treatment method for urinary stones diseases depends on the chemical composition of the stone and its corresponding fragility. MDCT has become the most used modality to determine rapidly and accurately the presence of stones when evaluating urinary lithiasis treatment. That is why several studies have tempted to determine the chemical composition of the stones based on the stone X-ray attenuation in-vitro and invivo. However, in-vitro studies did not reproduce the normal abdominal wall and fat, making uncertain the standardization of the obtained values. The aim of this study is to obtain X-ray attenuation values (in Hounsfield Units) of the six more frequent types of human renal stones (n=217) and to analyze the influence of the surrounding media on these values. The stones were first placed in a jelly, which X-ray attenuation is similar to that of the human kidney (30 HU at 120 kV). They were then stuck on a grid, scanned in a water tank and finally scanned in the air. Significant differences in CT-attenuation values were obtained with the three different surrounding media (jelly, water, air). Furthermore there was an influence of the surrounding media and consequently discrepancies in determination of the chemical composition of the renal stones. Consequently, CT-attenuation values found in in-vitro studies cannot really be considered as a reference for the determination of the chemical composition except if the used phantom is an anthropomorphic one.

  14. Lantana montevidensis Essential Oil: Chemical Composition and Mosquito Repellent Activity against Aedes aegypti

    Science.gov (United States)

    The essential oil (EO) of Lantana montevidensis (Spreng.) Briq. (L. sellowiana Link & Otto) was investigated for its chemical composition and mosquito repellent activity. The essential oil obtained by hydrodistillation of aerial plant parts was analyzed by GC-FID and GC-MS. The major constituents we...

  15. Phoenix dactylifera L. spathe essential oil: Chemical composition and repellent activity against the yellow fever mosquito

    Science.gov (United States)

    Date palm, Phoenix dactylifera L. (Arecaceae), grows commonly in the Arabian Peninsula and is traditionally used to treat various diseases. The aim of the present study was to identify chemical composition of the essential oil and to investigate the repellent activity. The essential oil of P. dacty...

  16. Numerical modeling of a compositional flow for chemical EOR and its stability analysis

    NARCIS (Netherlands)

    Druetta, P.; Yue, J.; Tesi, P.; De Persis, C.; Picchioni, F.

    2017-01-01

    A new two-dimensional surfactant flooding simulator for a three-component (water, petroleum, chemical), two-phase (aqueous, oleous) system in porous media is developed and analyzed. The compositional physical model is governed by a system of non-linear partial differential equations composed of Darc

  17. Thermo-chemical simultion of a composite offshore vertical axis wind turbine blade

    NARCIS (Netherlands)

    Baran, Ismet; Tutum, Cem Celal; Hattel, Jesper Henri

    2012-01-01

    In the present study three dimensional steady state thermo-chemical simulation of a pultrusion process is investigated by using the finite element/nodal control volume (FE/NCV) technique. Pultrusion simulation of a composite having a C-shaped cross section is performed as a validation case. The

  18. Calculation of chemical composition of zeolites in mordenite-clinoptilolite rocks

    Directory of Open Access Journals (Sweden)

    А.Д. Кустовська

    2005-01-01

    Full Text Available  Individual chemical composition of mordenite and clinoptilolite, which are both found in zeolite rocks and acid modification effect on them have been calculated. For the purpose of this study, samples of rocks of the same deposit (village Lypcha, Transcarpatia with different content of mordenite and clinoptilolite have been used.

  19. Effects of diet on the chemical composition of migratory locusts (Locusta migratoria)

    NARCIS (Netherlands)

    Oonincx, D.G.A.B.; Poel, van der A.F.B.

    2011-01-01

    An experiment was conducted to determine the effects of diet on the chemical composition of migratory locusts (Locusta migratoria L.). Fresh and dry weight and the contents of dry matter, ash, lipid, protein, Ca, K, Mg, Na, P, Cu, Fe, Zn, retinol, lutein, zeaxanthine, cryptoxanthin, carotenes, lycop

  20. Chemical composition, functional and sensory characteristics of wheat-taro composite flours and biscuits.

    Science.gov (United States)

    Himeda, Makhlouf; Njintang Yanou, Nicolas; Fombang, Edith; Facho, Balaam; Kitissou, Pierre; Mbofung, Carl M F; Scher, Joel

    2014-09-01

    The physicochemical, alveographic and sensory characteristics of precooked taro-wheat composite flours and their biscuits were investigated. A 2x7 factorial design consisting of two varieties of taro flour (Red Ibo Ngaoundere, RIN, and egg-like varieties) and 7 levels of wheat substitutions (0, 5, 10, 15, 20, 25 and 30 %) was used for this purpose. It was observed that water absorption capacity (range 95-152 g/100 g), water solubility index (range 18.8-29.5 g/100 g) and swelling capacity (range 125.4-204.6 mL/100 g) of composite flours significantly (p < 0.05) increased with increase in taro level. Conversely the dough elasticity index (range 59.8-0 %), extensibility (78-22 mm) and strength (range 281-139 × 10(-4) joules) significantly (p < 0.05) diminished with increase in wheat substitution. Up to 10 % substitution with RIN taro flour and 15 % with egg-like taro flour, the composite taro-wheat dough exhibited elasticity indices acceptable for the production of baking products, whereas at all levels of taro substitution, the composite biscuits samples were either acceptable as or better (5-10 % substitution with RIN flour) than 100 % wheat biscuit.

  1. Characterizing the interphase dielectric constant of polymer composite materials: Effect of chemical coupling agents

    Science.gov (United States)

    Todd, Michael G.; Shi, Frank G.

    2003-10-01

    Recent research into the dielectric characteristics of polymer-ceramic composites has shown that the interphase region of the composite can have a dielectric constant significantly different from that of the polymer phase due to covalent bonding of the polymer molecules to the surface of the filler particles. Chemical coupling agents and surfactants such as functional silanes, organotitanates, organometallic chelating agents, phosphate esters, and various ionic and nonionic organic esters are commonly employed to enhance the compatibility between the polymer phase and dispersed filler phase of composite systems. Using experimental data and molecular dipole polarization calculations, we determine the effect of such coupling agents on the interphase dielectric constant. Our results show that the addition of functional silane coupling agents or nonionic surfactants at concentrations of 0.5 wt % or less of the total organics of a polymer-ceramic composite system has significant effects on the dielectric constant of the interphase region, yet has little or no effect on the dielectric constant values of the polymer phase. Furthermore, the chemical bonding of the coupling agents to the ceramic filler particles determine the dielectric constant of the interphase region as predicted by chemical polarization calculations. These results are fully consistent with experimental evidence and further validate the use of molecular polarization calculations of composite interphase regions to determine and predict the overall effective dielectric properties of packaging materials for a wide range of electrical, electronic, and rf applications.

  2. Effect of chemical treatment of Kevlar fibers on mechanical interfacial properties of composites.

    Science.gov (United States)

    Park, Soo-Jin; Seo, Min-Kang; Ma, Tae-Jun; Lee, Douk-Rae

    2002-08-01

    In this work, the effects of chemical treatment on Kevlar 29 fibers have been studied in a composite system. The surface characteristics of Kevlar 29 fibers were characterized by pH, acid-base value, X-ray photoelectron spectroscopy (XPS), and FT-IR. The mechanical interfacial properties of the final composites were studied by interlaminar shear strength (ILSS), critical stress intensity factor (K(IC)), and specific fracture energy (G(IC)). Also, impact properties of the composites were investigated in the context of differentiating between initiation and propagation energies and ductile index (DI) along with maximum force and total energy. As a result, it was found that chemical treatment with phosphoric acid solution significantly affected the degree of adhesion at interfaces between fibers and resin matrix, resulting in improved mechanical interfacial strength in the composites. This was probably due to the presence of chemical polar groups on Kevlar surfaces, leading to an increment of interfacial binding force between fibers and matrix in a composite system.

  3. Cuticle structure in relation to chemical composition: re-assessing the prevailing model

    Directory of Open Access Journals (Sweden)

    Victoria eFernandez

    2016-03-01

    Full Text Available The surface of most aerial plant organs is covered with a cuticle that provides protection against multiple stress factors including dehydration. Interest on the nature of this external layer dates back to the beginning of the 19th century and since then, several studies facilitated a better understanding of cuticular chemical composition and structure. The prevailing undertanding of the cuticle as a lipidic, hydrophobic layer which is independent from the epidermal cell wall underneath stems from the concept developed by Brongniart and von Mohl during the first half of the 19th century. Such early investigations on plant cuticles attempted to link chemical composition and structure with the existing technologies, and have not been directly challenged for decades. Beginning with a historical overview about the development of cuticular studies, this review is aimed at critically assessing the information available on cuticle chemical composition and structure, considering studies performed with cuticles and isolated cuticular chemical components. The concept of the cuticle as a lipid layer independent from the cell wall is subsequently challenged, based on the existing literature, and on new findings pointing towards the cell wall nature of this layer, also providing examples of different leaf cuticle structures. Finally, the need for a re-assessment of the chemical and structural nature of the plant cuticle is highlighted, considering its cell wall nature and variability among organs, species, developmental stages, and biotic and abiotic factors during plant growth.

  4. Cuticle Structure in Relation to Chemical Composition: Re-assessing the Prevailing Model

    Science.gov (United States)

    Fernández, Victoria; Guzmán-Delgado, Paula; Graça, José; Santos, Sara; Gil, Luis

    2016-01-01

    The surface of most aerial plant organs is covered with a cuticle that provides protection against multiple stress factors including dehydration. Interest on the nature of this external layer dates back to the beginning of the 19th century and since then, several studies facilitated a better understanding of cuticular chemical composition and structure. The prevailing undertanding of the cuticle as a lipidic, hydrophobic layer which is independent from the epidermal cell wall underneath stems from the concept developed by Brongniart and von Mohl during the first half of the 19th century. Such early investigations on plant cuticles attempted to link chemical composition and structure with the existing technologies, and have not been directly challenged for decades. Beginning with a historical overview about the development of cuticular studies, this review is aimed at critically assessing the information available on cuticle chemical composition and structure, considering studies performed with cuticles and isolated cuticular chemical components. The concept of the cuticle as a lipid layer independent from the cell wall is subsequently challenged, based on the existing literature, and on new findings pointing toward the cell wall nature of this layer, also providing examples of different leaf cuticle structures. Finally, the need for a re-assessment of the chemical and structural nature of the plant cuticle is highlighted, considering its cell wall nature and variability among organs, species, developmental stages, and biotic and abiotic factors during plant growth. PMID:27066059

  5. CHEMICAL COMPOSITION VARIABILITY IN THE Uncaria tomentosa (cat’s claw WILD POPULATION

    Directory of Open Access Journals (Sweden)

    Evelyn Maribel Condori Peñaloza

    2015-03-01

    Full Text Available Uncaria tomentosa (cat's claw is a vine widely distributed throughout the South-American rainforest. Many studies investigating the chemical composition of cat's claw have focused on the pentacyclic (POA and tetracyclic oxindole alkaloids (TOA, quinovic acid glycosides (QAG, and polyphenols (PPH. Nevertheless, it is still uncertain how environmental factors affect chemical groups. The aim of this work was to better understand the influence of environmental factors (geographic origin, altitude, and season on cat's claw chemical composition. Stem bark, branches and leaf samples were extracted and analyzed by HPLC-PDA. The data obtained were explored by multivariate analysis (HCA and PCA. Higher amounts of oxindole alkaloids and PPH were found in leaves, followed by stem bark and branches. No clear relationship was verified among geographic origin or altitude and chemical composition, which remained unchanged regardless of season (dry or rainy. However, three oxindole alkaloid chemotypes were clearly recognized: chemotype I (POA with cis D/E ring junction; chemotype II (POA with trans D/E ring junction; and chemotype III (TOA. Thus, environmental factors appear to have only a minor influence on the chemical heterogeneity of the cat's claw wild population. Nevertheless, the occurrence of different chemotypes based on alkaloid profiles seems to be clear.

  6. EFFECT OF THERMAL TREATMENT ON THE CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES OF BIRCH AND ASPEN

    Directory of Open Access Journals (Sweden)

    Duygu Kocaefe

    2008-05-01

    Full Text Available The high temperature treatment of wood is one of the alternatives to chemical treatment. During this process, the wood is heated to higher temperatures than those of conventional drying. The wood structure changes due to decomposition of hemicelluloses, ramification of lignin, and crystallization of cellulose. The wood becomes less hygroscopic. These changes improve the dimensional stability of wood, increase its resistance to micro-organisms, darken its color, and modify its hardness. However, wood also might loose some of its elasticity. Consequently, the heat treatment conditions have to be optimized. Therefore, it is important to understand the transformation of the chemical structure of wood caused by the treatment. In this study, the modification of the surface composition of the wood was followed with Fourier transform infrared spectroscopy (FTIR and inverse gas chromatography (IGC under different experimental conditions. The effect of maximum treatment temperatures on the chemical composition of Canadian birch and aspen as well as the correlations between their chemical transformation and different mechanical properties are presented. FTIR analysis results showed that the heat treatment affected the chemical composition of birch more compared to that of aspen. The results of IGC tests illustrated that the surfaces of the aspen and birch became more basic with heat treatment. The mechanical properties were affected by degradation of hemicellulose, ramification of lignin and cellulose crystallization.

  7. The effect of biological and chemical additives on the chemical composition and fermentation process of Dactylis glomerata silage

    Directory of Open Access Journals (Sweden)

    Jhonny E. Alba-Mejía

    2016-06-01

    Full Text Available This study was carried out to determine the chemical composition, silage quality and ensilability of ten cocksfoot cultivars using biological and chemical silage additives. The plant material was harvested from the first and second cut, cultivated at the Research Station of Fodder Crops in Vatín, Czech Republic. Wilted forage was chopped and ensiled in mini-silos with 3 replicates per treatment. The treatments were: 1 without additives, used as a control; 2 with bacterial inoculants; and 3 with chemical preservatives. The results indicated that the year factor (2012-2013 influenced significantly the chemical composition of the silage in both cuts. The use of biological inoculants reduced the content of crude fibre and acid detergent fibre; but it did not influence the content of neutral detergent fibre, in comparison with the control silage in both cuts. Furthermore, the application of biological inoculants reduced the concentration of lactic acid (LA and acetic acid (AA in contrast to the control silage in the first cut. Moreover, in the second cut the same values tended to be the opposite. Interestingly, ‘Amera’ was the unique variety that presented a high concentration of butyric acid (0.2% in comparison with other varieties in the first cut. In conclusion, the biological inoculants had a favourable effect on silage fermentation. Notably, only ‘Greenly’ and ‘Starly’ varieties from the first cut; and ‘Greenly’, ‘Sw-Luxor’, and ‘Otello’ varieties from the second cut were appropriate for ensiling because their pH-values; LA and AA concentrations were ideal according to the parameters of the fermentation process.

  8. The effect of biological and chemical additives on the chemical composition and fermentation process of Dactylis glomerata silage

    Energy Technology Data Exchange (ETDEWEB)

    Alba-Mejía, J.E.; Skladanka, J.; Hilger-Delgado, A.; Klíma, M.; Knot, P.; Doležal, P.; Horky, P.

    2016-11-01

    This study was carried out to determine the chemical composition, silage quality and ensilability of ten cocksfoot cultivars using biological and chemical silage additives. The plant material was harvested from the first and second cut, cultivated at the Research Station of Fodder Crops in Vatín, Czech Republic. Wilted forage was chopped and ensiled in mini-silos with 3 replicates per treatment. The treatments were: 1) without additives, used as a control; 2) with bacterial inoculants; and 3) with chemical preservatives. The results indicated that the year factor (2012-2013) influenced significantly the chemical composition of the silage in both cuts. The use of biological inoculants reduced the content of crude fibre and acid detergent fibre; but it did not influence the content of neutral detergent fibre, in comparison with the control silage in both cuts. Furthermore, the application of biological inoculants reduced the concentration of lactic acid (LA) and acetic acid (AA) in contrast to the control silage in the first cut. Moreover, in the second cut the same values tended to be the opposite. Interestingly, ‘Amera’ was the unique variety that presented a high concentration of butyric acid (0.2%) in comparison with other varieties in the first cut. In conclusion, the biological inoculants had a favourable effect on silage fermentation. Notably, only ‘Greenly’ and ‘Starly’ varieties from the first cut; and ‘Greenly’, ‘Sw-Luxor’, and ‘Otello’ varieties from the second cut were appropriate for ensiling because their pH-values; LA and AA concentrations were ideal according to the parameters of the fermentation process. (Author)

  9. Composition and chemical variability of leaf oil of Myrtus communis from north-eastern Algeria.

    Science.gov (United States)

    Bouzabata, Amel; Boussaha, Faffani; Casanova, Joseph; Tomi, Félix

    2010-10-01

    The chemical composition of 27 oil samples of Myrtus communis isolated from leaves collected in three locations in north-eastern Algeria was investigated by GC(RI) and 13C NMR spectroscopy. Yields ranged between 0.2-1.2% (w/w). The chemical composition of the oils was largely dominated by monoterpene hydrocarbons, with alpha-pinene (40.5-64.0%), 1,8-cineole (10.9-29.1%) and limonene (6.7-8.2%) being the major compounds. In all the samples, 3,3,5,5,8,8-hexamethyl-7-oxabicyclo[4.3.0]non-1(6)-ene-2,4-dione was identified (0.8-1.5%). The composition is similar to that reported for myrtle oils from Corsica, Sardinia and Tunisia, but differed from that of Moroccan and Spanish myrtle oils.

  10. Influence of seasonality on the chemical composition of oysters (Crassostrea rhizophorae).

    Science.gov (United States)

    Lira, Giselda M; Pascoal, Jadna C M; Torres, Elizabeth A F S; Soares, Rosana A M; Mendonça, Simone; Sampaio, Geni R; Correia, Meiryellen S; Cabral, Caterine C V Q; Cabral Júnior, Cyro R; López, Ana M Q

    2013-06-01

    This paper aimed to evaluate the influence of seasonality on the chemical composition of oysters (Crassostrea rhizophorae). Samples were collected during summer and winter from the estuary and lagoon complex of the municipality of Barra de São Miguel, Alagoas, Brazil. Statistical differences (p<0.05) between summer and winter were observed in relation to chemical composition. The oysters cultivated in the winter presented some nutritional advantages because of the higher levels of proteins and functional nutrients, such as the eicosapentaenoic-docosahexaenoic acid combination and percentages of polyunsaturated fatty acids (n-3 and n-6), and the lower levels of saturated fatty acids. Therefore, the animals in winter presented a higher content of cholesterol oxides. The levels of cholesterol oxides found in these products during winter may encourage researchers to investigate the composition of oysters cultivated in different climates all over the world. Copyright © 2012. Published by Elsevier Ltd.

  11. IMPROVEMENTS IN WOOD THERMOPLASTIC MATRIX COMPOSITE MATERIALS PROPERTIES BY PHYSICAL AND CHEMICAL TREATMENTS

    Directory of Open Access Journals (Sweden)

    Irena Zivkovic

    2016-03-01

    Full Text Available This paper presents a short overview of the developments made in the field of wood thermoplastic composites in terms of surface treatment, flammability, matrix/reinforcement model, properties and application of recycled polymer matrices. The usage of lignocellulosic fibers as reinforcement in composite materials demands well formed interface between the fiber and the matrix. Because of the different nature of reinforcement and matrix components some physical and chemical treatment methods which improve the fiber matrix adhesion were introduced, as well as the improvements of lignocellulosic fibers and thermoplastic polymer matrix based composites flammability characteristics. These physical and chemical treatments influence the hydrophilic character of the lignocellulosic fibers, and therefore change their physical and mechanical properties.

  12. Effect of Chemical Treatments on Flax Fibre Reinforced Polypropylene Composites on Tensile and Dome Forming Behaviour

    Directory of Open Access Journals (Sweden)

    Wentian Wang

    2015-03-01

    Full Text Available Tensile tests were performed on two different natural fibre composites (same constituent material, similar fibre fraction and thickness but different weave structure to determine changes in mechanical properties caused by various aqueous chemical treatments and whether any permanent changes remain on drying. Scanning electronic microscopic examinations suggested that flax fibres and the flax/polypropylene interface were affected by the treatments resulting in tensile property variations. The ductility of natural fibre composites was improved significantly under wet condition and mechanical properties (elongation-to-failure, stiffness and strength can almost retain back to pre-treated levels when dried from wet condition. Preheating is usually required to improve the formability of material in rapid forming, and the chemical treatments performed in this study were far more effective than preheating. The major breakthrough in improving the formability of natural fibre composites can aid in rapid forming of this class of material system.

  13. Chemical composition and antibacterial activity of Opuntia ficus-indica f. inermis (cactus pear) flowers.

    Science.gov (United States)

    Ennouri, Monia; Ammar, Imene; Khemakhem, Bassem; Attia, Hamadi

    2014-08-01

    Opuntia ficus-indica f. inermis (cactus pear) flowers have wide application in folk medicine. However, there are few reports focusing on their biological activity and were no reports on their chemical composition. The nutrient composition and hexane extracts of Opuntia flowers at 4 flowering stages and their antibacterial and antifungal activities were investigated. The chemical composition showed considerable amounts of fiber, protein, and minerals. Potassium (K) was the predominant mineral followed by calcium (Ca), magnesium (Mg), sodium (Na), iron (Fe), and zinc (Zn). The main compounds in the various hexane extracts were 9.12-octadecadienoic acid (29-44%) and hexadecanoic acid (8.6-32%). The antibacterial activity tests showed that O. inermis hexane extracts have high effectiveness against Escherichia coli and Staphylococcus aureus, making this botanical source a potential contender as a food preservative or food control additive.

  14. Chemical composition and liberation characterization of printed circuit board comminution fines for beneficiation investigations.

    Science.gov (United States)

    Ogunniyi, I O; Vermaak, M K G; Groot, D R

    2009-07-01

    Chemical composition and liberation are critical attributes in characterizing a resource stock for beneficiation investigations. Though end-of-life printed circuit board is recognized as a valuable secondary resource stock, no procedural standard exists for the determination of its chemical composition, nor for the -75 microm fines generated during its comminution. The effect of the digestion procedure on the final assays in wet spectroscopic analyses was assessed in this work. Liberation was also explored against literature background. Determination of assays of all constituent elements in printed circuit board comminution fines was found to require comparison of data from more than one digestion condition, while composite particles still persist at the fines sizes, though very few. The discussion reflects how these impact the beneficiation investigations.

  15. [Study on the chemical compositions of VOCs emitted by cooking oils based on GC-MS].

    Science.gov (United States)

    He, Wan-Qing; Nie, Lei; Tian, Gang; Li, Jing; Shao, Xia; Wang, Min-Yan

    2013-12-01

    Volatile organic compounds (VOCs) are key precursors of ozone and secondary organic aerosols in air, and the differences in the compositions of VOCs lead to their different contribution to atmospheric reaction. Cooking oil fume is one of the important sources of atmospheric VOCs, and its chemical compositions are distinct under different conditions of oil types, food types, cooking methods and heating temperatures etc. In this study, the production of cooking oil fume was simulated by heating typical pure vegetable oils (peanut oil, sunflower oil, soybean oil, olive oil and blend oil) at different temperatures in beakers to investigate the chemical compositions of VOCs. The emitted VOCs were sampled with a Tenax adsorption tube and analyzed using GC-MS after thermal desorption. According to spectral library search and map analysis, using area normalized semi-quantitative method, preliminary qualitative and quantitative tests were conducted for the specific components of VOCs under different conditions.

  16. Chemical synthesis of nanocrystalline ZrO2-SnO2 composite powders

    Institute of Scientific and Technical Information of China (English)

    YANG Huaming; ZHANG Xiangchao; YANG Wuguo; HUANG Chenghuan; QIU Guanzhou

    2004-01-01

    ZrO2-SnO2 composite nanoparticles were prepared by heating the hydrate precursors synthesized by the chemical co-precipitation reaction of ZrOCl2 and SnCl4. The precursors were examined by differential thermal analysis (DTA) and thermogravimetric analysis (TGA). The composite powder was characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and desorption isotherm (Barrett-Joyner-Halenda method). The average crystal size of the nanoparticle ranges from 15 to 30 nm for the sample containing 5%-25% ZrO2 (mass fraction). Most of the pores in the ZrO2-SnO2 nanoparticles are about 10-20 nm in diameter. The composite powder is promising for chemical sensors.

  17. Chemical composition measurements of the low activity waste (LAW) EPA-Series glasses

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-01

    In this report, the Savannah River National Laboratory provides chemical analysis results for a series of simulated low activity waste glasses provided by Pacific Northwest National Laboratory as part of an ongoing development task. The measured chemical composition data are reported and compared with the targeted values for each component for each glass. A detailed review showed no indications of errors in the preparation or measurement of the study glasses. All of the measured sums of oxides for the study glasses fell within the interval of 100.2 to 100.8 wt %, indicating recovery of all components. Comparisons of the targeted and measured chemical compositions showed that the measured values for the glasses met the targeted concentrations within 10% for those components present at more than 5 wt %.

  18. Chemical composition of AY Ceti: A flaring, spotted star with a white dwarf companion

    CERN Document Server

    Tautvaišienė, G; Berdyugina, S; Ilyin, I; Chorniy, Y

    2012-01-01

    The detailed chemical composition of the atmosphere AY Cet (HD 7672) is determined from a high-resolution spectrum in the optical region. The main atmospheric parameters and the abundances of 22 chemical elements, including key species such as 12C, 13C, N, and O, are determined. A differential line analysis gives T_eff=5080 K, log g=3.0, [Fe/H]=-0.33, [C/Fe]=-0.17, [N/Fe]=0.17, [O/Fe]=0.05, C/N=1.58, and 12C/13C=21. Despite the high chromospheric activity, the optical spectrum of AY Cet provides a chemical composition typical for first ascent giants after the first dredge-up.

  19. Continental igneous rock composition: A major control of past global chemical weathering.

    Science.gov (United States)

    Bataille, Clément P; Willis, Amy; Yang, Xiao; Liu, Xiao-Ming

    2017-03-01

    The composition of igneous rocks in the continental crust has changed throughout Earth's history. However, the impact of these compositional variations on chemical weathering, and by extension on seawater and atmosphere evolution, is largely unknown. We use the strontium isotope ratio in seawater [((87)Sr/(86)Sr)seawater] as a proxy for chemical weathering, and we test the sensitivity of ((87)Sr/(86)Sr)seawater variations to the strontium isotopic composition ((87)Sr/(86)Sr) in igneous rocks generated through time. We demonstrate that the (87)Sr/(86)Sr ratio in igneous rocks is correlated to the epsilon hafnium (εHf) of their hosted zircon grains, and we use the detrital zircon record to reconstruct the evolution of the (87)Sr/(86)Sr ratio in zircon-bearing igneous rocks. The reconstructed (87)Sr/(86)Sr variations in igneous rocks are strongly correlated with the ((87)Sr/(86)Sr)seawater variations over the last 1000 million years, suggesting a direct control of the isotopic composition of silicic magmatism on ((87)Sr/(86)Sr)seawater variations. The correlation decreases during several time periods, likely reflecting changes in the chemical weathering rate associated with paleogeographic, climatic, or tectonic events. We argue that for most of the last 1000 million years, the ((87)Sr/(86)Sr)seawater variations are responding to changes in the isotopic composition of silicic magmatism rather than to changes in the global chemical weathering rate. We conclude that the ((87)Sr/(86)Sr)seawater variations are of limited utility to reconstruct changes in the global chemical weathering rate in deep times.

  20. Chemical composition of glass and crystalline phases in coarse coal gasification ash

    Energy Technology Data Exchange (ETDEWEB)

    R.H. Matjie; Zhongsheng Li; Colin R. Ward; David French [Sasol Technology (Pty) Ltd., Sasolburg (South Africa)

    2008-05-15

    A procedure has been developed for determining the chemical composition and relative abundance of the amorphous or glassy material, as well as crystalline phases, present in coarse coal gasification ash, in order to assist in predicting the behaviour of the material in cement/brick/concrete applications. The procedure is based on a combination of quantitative X-ray diffraction (XRD), chemical analysis and electron microprobe studies. XRD analysis indicates that the clinker samples contain a number of crystalline high temperature phases, including anorthite, mullite, cristobalite, quartz and diopside. Quantitative evaluation using Rietveld-based techniques has been used to determine the percentages of both the individual crystalline phases and the glass component. These data were then combined with the chemistry of the crystalline phases and the overall chemical composition of the ash to estimate the chemical composition of the glass phase, which is typically the most abundant component present in the different materials. Although there is some degree of scatter, comparison between the inferred glass composition from XRD and bulk chemistry and actual data on the glass composition using electron microprobe techniques suggest that the two approaches are broadly consistent. The microprobe further indicates that a range of compositions are present in the glassy and crystalline components of the ashes, including Si-Al-rich glass, metakaolin and Fe-Ca-Mg-Ti phases, as well as quartz, anorthite and an aluminophosphate material. Electron microprobe and XRD studies also show that pyrrhotite (FeS), representing a high temperature transformation product of pyrite, is present in some clinker and partially burnt carbonaceous shale samples. 27 refs., 5 figs., 7 tabs.

  1. Differences in chemical composition of soil organic carbon resulting from long-term fertilization strategies.

    Science.gov (United States)

    Li, Zengqiang; Zhao, Bingzi; Wang, Qingyun; Cao, Xiaoyan; Zhang, Jiabao

    2015-01-01

    Chemical composition of soil organic carbon (SOC) is central to soil fertility. We hypothesize that change in SOC content resulting from various long-term fertilization strategies accompanies the shift in SOC chemical structure. This study examined the effect of fertilization strategies along with the time of fertilizer application on the SOC composition by 13C nuclear magnetic resonance (NMR) spectroscopy. The soils (Aquic Inceptisol) subjected to seven fertilizer treatments were collected in 1989, 1999 and 2009, representing 0, 10 and 20 years of fertilization, respectively. The seven fertilizer treatments were (1-3) balanced fertilization with application of nitrogen (N), phosphorus (P) and potassium (K) including organic compost (OM), half organic compost plus half chemical fertilizer (1/2OM), and pure chemical NPK fertilizer (NPK); (4-6) unbalanced chemical fertilization without application of one of the major elements including NP fertilizer (NP), PK fertilizer (PK), and NK fertilizer (NK); and (7) an unamended control (CK). The SOC content in the balanced fertilization treatments were 2.3-52.6% and 9.4-64.6% higher than in the unbalanced fertilization/CK treatments in 1999 and 2009, respectively, indicating significant differences in SOC content with time of fertilizer application between the two treatment groups. There was a significantly greater proportion of O-alkyl C and a lower proportion of aromatic C in the balanced fertilization than in unbalanced fertilization/CK treatments in 1999, but not in 2009, because their proportions in the former treatments approached the latter in 2009. Principal component analysis further showed that the C functional groups from various fertilization strategies tended to become compositionally similar with time. The results suggest that a shift in SOC chemical composition may be firstly dominated by fertilization strategies, followed by fertilization duration.

  2. Wood Chemical Composition in Species of Cactaceae: The Relationship between Lignification and Stem Morphology

    Science.gov (United States)

    Canché-Escamilla, Gonzalo; Soto-Hernández, Marcos

    2015-01-01

    In Cactaceae, wood anatomy is related to stem morphology in terms of the conferred support. In species of cacti with dimorphic wood, a unique process occurs in which the cambium stops producing wide-band tracheids (WBTs) and produces fibers; this is associated with the aging of individuals and increases in size. Stem support and lignification have only been studied in fibrous tree-like species, and studies in species with WBTs or dimorphic wood are lacking. In this study, we approach this process with a chemical focus, emphasizing the role of wood lignification. We hypothesized that the degree of wood lignification in Cactaceae increases with height of the species and that its chemical composition varies with wood anatomy. To test this, we studied the chemical composition (cellulose, hemicellulose, and lignin content) in 13 species (2 WBTs wood, 3 dimorphic, and 8 fibrous) with contrasting growth forms. We also analyzed lignification in dimorphic and fibrous species to determine the chemical features of WBTs and fibers and their relationship with stem support. The lignin contents were characterized by Fourier transform infrared spectroscopy and high performance liquid chromatography. We found that 11 species have a higher percentage (>35%) of lignin in their wood than other angiosperms or gymnosperms. The lignin chemical composition in fibrous species is similar to that of other dicots, but it is markedly heterogeneous in non-fibrous species where WBTs are abundant. The lignification in WBTs is associated with the resistance to high water pressure within cells rather than the contribution to mechanical support. Dimorphic wood species are usually richer in syringyl lignin, and tree-like species with lignified rays have more guaiacyl lignin. The results suggest that wood anatomy and lignin distribution play an important role in the chemical composition of wood, and further research is needed at the cellular level. PMID:25880223

  3. Wood chemical composition in species of Cactaceae: the relationship between lignification and stem morphology.

    Directory of Open Access Journals (Sweden)

    Jorge Reyes-Rivera

    Full Text Available In Cactaceae, wood anatomy is related to stem morphology in terms of the conferred support. In species of cacti with dimorphic wood, a unique process occurs in which the cambium stops producing wide-band tracheids (WBTs and produces fibers; this is associated with the aging of individuals and increases in size. Stem support and lignification have only been studied in fibrous tree-like species, and studies in species with WBTs or dimorphic wood are lacking. In this study, we approach this process with a chemical focus, emphasizing the role of wood lignification. We hypothesized that the degree of wood lignification in Cactaceae increases with height of the species and that its chemical composition varies with wood anatomy. To test this, we studied the chemical composition (cellulose, hemicellulose, and lignin content in 13 species (2 WBTs wood, 3 dimorphic, and 8 fibrous with contrasting growth forms. We also analyzed lignification in dimorphic and fibrous species to determine the chemical features of WBTs and fibers and their relationship with stem support. The lignin contents were characterized by Fourier transform infrared spectroscopy and high performance liquid chromatography. We found that 11 species have a higher percentage (>35% of lignin in their wood than other angiosperms or gymnosperms. The lignin chemical composition in fibrous species is similar to that of other dicots, but it is markedly heterogeneous in non-fibrous species where WBTs are abundant. The lignification in WBTs is associated with the resistance to high water pressure within cells rather than the contribution to mechanical support. Dimorphic wood species are usually richer in syringyl lignin, and tree-like species with lignified rays have more guaiacyl lignin. The results suggest that wood anatomy and lignin distribution play an important role in the chemical composition of wood, and further research is needed at the cellular level.

  4. Wood chemical composition in species of Cactaceae: the relationship between lignification and stem morphology.

    Science.gov (United States)

    Reyes-Rivera, Jorge; Canché-Escamilla, Gonzalo; Soto-Hernández, Marcos; Terrazas, Teresa

    2015-01-01

    In Cactaceae, wood anatomy is related to stem morphology in terms of the conferred support. In species of cacti with dimorphic wood, a unique process occurs in which the cambium stops producing wide-band tracheids (WBTs) and produces fibers; this is associated with the aging of individuals and increases in size. Stem support and lignification have only been studied in fibrous tree-like species, and studies in species with WBTs or dimorphic wood are lacking. In this study, we approach this process with a chemical focus, emphasizing the role of wood lignification. We hypothesized that the degree of wood lignification in Cactaceae increases with height of the species and that its chemical composition varies with wood anatomy. To test this, we studied the chemical composition (cellulose, hemicellulose, and lignin content) in 13 species (2 WBTs wood, 3 dimorphic, and 8 fibrous) with contrasting growth forms. We also analyzed lignification in dimorphic and fibrous species to determine the chemical features of WBTs and fibers and their relationship with stem support. The lignin contents were characterized by Fourier transform infrared spectroscopy and high performance liquid chromatography. We found that 11 species have a higher percentage (>35%) of lignin in their wood than other angiosperms or gymnosperms. The lignin chemical composition in fibrous species is similar to that of other dicots, but it is markedly heterogeneous in non-fibrous species where WBTs are abundant. The lignification in WBTs is associated with the resistance to high water pressure within cells rather than the contribution to mechanical support. Dimorphic wood species are usually richer in syringyl lignin, and tree-like species with lignified rays have more guaiacyl lignin. The results suggest that wood anatomy and lignin distribution play an important role in the chemical composition of wood, and further research is needed at the cellular level.

  5. Effect of chemical degradation followed by toothbrushing on the surface roughness of restorative composites

    Directory of Open Access Journals (Sweden)

    Fernanda Regina Voltarelli

    2010-12-01

    Full Text Available OBJECTIVES: The aim of the present study was to assess the effect of the exposure to food-simulating liquids prior to brushing simulation on the surface roughness of five composite materials (Quixfil, Filtek Supreme, Esthet-X, Filtek Z250, Tetric Ceram. Material and METHODS: Twenty cylinders (5 mm diameter and 4 mm height of each composite were randomly allocated to 4 groups (n=5, according to the food-simulating liquid in which they were immersed for 7 days at 37°C: artificial saliva, heptane, citric acid, and ethanol. After this period, the top surface of composite cylinders was submitted to 7,500 brushing cycles (200 g load. Measurements of the surface roughness (Ra, ¼m were carried out before and after the exposure to the chemicals/brushing simulation. Changes on the morphology of composite surfaces were observed through scanning electron microscopy (SEM. RESULTS: The statistical analysis (ANOVA with cofactor / Tukey's test, α=5% detected a significant interaction between solutions and composite resins. Esthet-X, Filtek Z250 and Tetric Ceram were not affected by the food-simulating liquids/toothbrushing. Citric acid and ethanol increased the surface roughness of Quixfil and Filtek Supreme, respectively. SEM images corroborate the surface roughness findings, demonstrating the negative effect from chemical solutions and mechanical abrasion. CONCLUSIONS: The surface roughness of composite resin materials are differently affected by the food-simulating solutions, depending on the immersion media.

  6. Chemical-garden formation, morphology, and composition. II. Chemical gardens in microgravity.

    Science.gov (United States)

    Cartwright, Julyan H E; Escribano, Bruno; Sainz-Díaz, C Ignacio; Stodieck, Louis S

    2011-04-05

    We studied the growth of metal-ion silicate chemical gardens under Earth gravity (1 g) and microgravity (μg) conditions. Identical sets of reaction chambers from an automated system (the Silicate Garden Habitat or SGHab) were used in both cases. The μg experiment was performed on board the International Space Station (ISS) within a temperature-controlled setup that provided still and video images of the experiment downlinked to the ground. Calcium chloride, manganese chloride, cobalt chloride, and nickel sulfate were used as seed salts in sodium silicate solutions of several concentrations. The formation and growth of osmotic envelopes and microtubes was much slower under μg conditions. In 1 g, buoyancy forces caused tubes to grow upward, whereas a random orientation for tube growth was found under μg conditions.

  7. Raman spectra of Martian glass analogues: A tool to approximate their chemical composition

    Science.gov (United States)

    Di Genova, Danilo; Kolzenburg, Stephan; Vona, Alessandro; Chevrel, Magdalena Oryaëlle; Hess, Kai-Uwe; Neuville, Daniel R.; Ertel-Ingrisch, Werner; Romano, Claudia; Dingwell, Donald B.

    2016-05-01

    Raman spectrometers will form a key component of the analytical suite of future planetary rovers intended to investigate geological processes on Mars. In order to expand the applicability of these spectrometers and use them as analytical tools for the investigation of silicate glasses, a database correlating Raman spectra to glass composition is crucial. Here we investigate the effect of the chemical composition of reduced silicate glasses on their Raman spectra. A range of compositions was generated in a diffusion experiment between two distinct, iron-rich end-members (a basalt and a peralkaline rhyolite), which are representative of the anticipated compositions of Martian rocks. Our results show that for silica-poor (depolymerized) compositions the band intensity increases dramatically in the regions between 550-780 cm-1 and 820-980 cm-1. On the other hand, Raman spectra regions between 250-550 cm-1 and 1000-1250 cm-1 are well developed in silica-rich (highly polymerized) systems. Further, spectral intensity increases at ~965 cm-1 related to the high iron content of these glasses (~7-17 wt % of FeOtot). Based on the acquired Raman spectra and an ideal mixing equation between the two end-members we present an empirical parameterization that enables the estimation of the chemical compositions of silicate glasses within this range. The model is validated using external samples for which chemical composition and Raman spectra were characterized independently. Applications of this model range from microanalysis of dry and hydrous silicate glasses (e.g., melt inclusions) to in situ field investigations and studies under extreme conditions such as extraterrestrial (i.e., Mars) and submarine volcanic environments.

  8. Modeling strength loss in wood by chemical composition. Part I, An individual component model for southern pine

    Science.gov (United States)

    J. E. Winandy; P. K. Lebow

    2001-01-01

    In this study, we develop models for predicting loss in bending strength of clear, straight-grained pine from changes in chemical composition. Although significant work needs to be done before truly universal predictive models are developed, a quantitative fundamental relationship between changes in chemical composition and strength loss for pine was demonstrated. In...

  9. Aerosol chemical composition at Cabauw, the Netherlands as observed in two intensive periods in May 2008 and March 2009

    NARCIS (Netherlands)

    Mensah, A.A.; Holzinger, R.; Otjes, R.; Trimborn, A.; Mentel, T.F.; Brink, H. ten; Henzing, B.; Kiendler-Scharr, A.

    2012-01-01

    Observations of aerosol chemical composition in Cabauw, the Netherlands, are presented for two intensive measurement periods in May 2008 and March 2009. Sub-micron aerosol chemical composition was measured by an Aerodyne Aerosol Mass Spectrometer (AMS) and is compared to observations from aerosol si

  10. Physico-Chemical, Functional and Rheological Characterization of Biodegradable Pellets and Composite Sheets

    Directory of Open Access Journals (Sweden)

    Jan Kulsum

    2016-01-01

    Full Text Available Deoiled rice bran, paddy husk, cashew nut shell liquid and glycerol were extruded into pellets and further pressed into composites. Processing and plasticizer type had significant effect on physico-chemical, functional, rheological and morphological properties of pellets and composites. Specific mechanical energy of the pellets containing cashew nut shell liquid as plasticizer was higher than those containing glycerol. The maximum hardness and bulk density were obtained for pellets prepared from cashew nut shell liquid. Water binding capacity and water solubility index of both pellets and composites were highest for samples containing glycerol as plasticizer. A significant change in functional properties during processing was observed among raw materials, pellets and the final product (composite sheets.

  11. The chemical composition of red giants in 47 Tucanae I: Fundamental parameters and chemical abundance patterns

    CERN Document Server

    Thygesen, A O; Andrievsky, S; Korotin, S; Yong, D; Zaggia, S; Ludwig, H -G; Collet, R; Asplund, M; D'Antona, F; Meléndez, J; D'Ercole, A

    2014-01-01

    Context: The study of chemical abundance patterns in globular clusters is of key importance to constrain the different candidates for intra-cluster pollution of light elements. Aims: We aim at deriving accurate abundances for a large range of elements in the globular cluster 47 Tucanae (NGC 104) to add new constraints to the pollution scenarios for this particular cluster, expanding the range of previously derived element abundances. Methods: Using tailored 1D LTE atmospheric models together with a combination of equivalent width measurements, LTE, and NLTE synthesis we derive stellar parameters and element abundances from high-resolution, high signal-to-noise spectra of 13 red giant stars near the tip of the RGB. Results: We derive abundances of a total 27 elements (O, Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Zr, Mo, Ru, Ba, La, Ce, Pr, Nd, Eu, Dy). Departures from LTE were taken into account for Na, Al and Ba. We find a mean [Fe/H] = $-0.78\\pm0.07$ and $[\\alpha/{\\rm Fe}]=0.34\\pm0.03$ in...

  12. Effects of Polishing on Proximate Composition, Physico- Chemical Characteristics, Mineral Composition and Antioxidant Properties of Pigmented Rice

    Directory of Open Access Journals (Sweden)

    Chagam Koteswara Reddy

    2017-09-01

    Full Text Available The effects of polishing on proximate compositions, physico-chemical characteristics, mineral compositions and antioxidant properties of the rice flours obtained from three different pigmented rice varieties (Chak-hao Angangba, Chak-hao Amubi and Chak-hao Poireiton were investigated. The rice varieties were significantly (P < 0.05 different in the contents of the test characteristics. Lipids, ash, minerals, phytochemicals (phenolic acids and flavonoids and 2,2-diphenyl-1-picrylhydrazyl (DPPH activity of rice flours were decreased after polishing (9% degree of milling, while amylose content and lightness were increased. X-ray diffraction pattern of rice flours exhibited A-type crystalline pattern with reflections at 15.1°, 17.1°, 18.2° and 23.0°. Pasting properties and transition temperatures were decreased after polishing treatment. Polishing resulted in changes in the crystallinity, enthalpy and morphology of rice flours.

  13. Defining the optimal conditions for catalytic cracking of oil fractions of different fraction and chemical composition

    Energy Technology Data Exchange (ETDEWEB)

    Zhorov, Yu.M.; Panchenkov, G.M.; Pivovarova, N.A.

    1982-01-01

    The optimum average benzene output for catalytic cracking (CC), temperature and speed of feed for raw materials of different fractions and chemical composition in the catalyzer KMTsP (microspher.) and Tseokar-2 (ball-type). Two gas oil fractions of different oils and a filtrate of paraffin production were used as raw materials. The CC was conducted in a device with an immovaeble layer of catalyzer at temperatures of 400-550/sup 0/ and a volume feed speed of 0.4-3.0 h/sup -1/. It is shown that during CC of more aromatic raw material, high temperatures are essential for benzene output. The values obtained from studying CC on catalyzer having the same chemistry but different fraction composition are the same. Using the Tseokar-2 resulted in a lower benzene output than was expected considering the chemical composition of the filtrate. This was due to the decrease in active Pv during coagulation of the catalyzer granules compared to the KMTsP. Conclusions are drawn concerning the need to consder the chemical composition of the cracking raw material before choosing the conditions for the process. The many cycle ArU is an undesirable component of the raw material and should be removed.

  14. Texture Profile Analysis of Sliced Cheese in relation to Chemical Composition and Storage Temperature

    Directory of Open Access Journals (Sweden)

    Yuanrong Zheng

    2016-01-01

    Full Text Available The quantitative relationships among chemical composition, storage temperature, and texture of cheese were not fully understood. In this study, the effects of composition and temperature on textural properties of eight common varieties of sliced cheese were examined. The textural properties of sliced cheeses, including firmness, cohesiveness, adhesiveness, springiness, chewiness, and resilience, were measured by texture profile analysis after storage at 4 and 25°C for 4 h. Multivariate logistic regression models were established to describe the quantitative relationships of textural properties (dependent variables to chemical composition and storage temperature (independent variables of sliced cheeses. Results showed that protein, fat, moisture, and sodium chloride contents as well as storage temperature significantly affected the texture of sliced cheeses (P<0.05. In particular, fat in the dry matter and moisture in the nonfat substances were negatively correlated with firmness of sliced cheeses (P<0.05. As storage temperature rose from 4 to 25°C, the average values of firmness, chewiness, and resilience substantially declined by 42%, 45%, and 17%, respectively (P<0.05. This study provided reference data for adjusting chemical composition and storage temperature of common cheese products to obtain favorable texture for Chinese consumers, which thereby facilitated the localization of cheese industry in Chinese market.

  15. Expanding current knowledge on the chemical composition and antioxidant activity of the genus Lactarius.

    Science.gov (United States)

    Vieira, Vanessa; Barros, Lillian; Martins, Anabela; Ferreira, Isabel C F R

    2014-12-10

    Despite the presence of toxic compounds in inedible mushrooms, the question whether the chemical nutrients and non-nutrients compositions in edible and inedible Lactarius species are similar remains unanswered. To answer this question, Lactarius citriolens Pouzar and Lactarius turpis (Weinm.) Fr., two inedible species, were studied in order to obtain information about their chemical composition and bioactivity. Free sugars, fatty acids, tocopherols, organic and phenolic acids were analysed by chromatographic techniques coupled to different detectors. L. citriolens and L. turpis methanolic extracts were tested regarding antioxidant potential (reducing power, radical scavenging activity and lipid peroxidation inhibition). The composition of macronutrients varied among the two species, but the profiles were similar between them and among other Lactarius species; L. citriolens gave the highest energy contribution, saturated fatty acids and organic acids, while the L. turpis sample was richer in free sugars, mono- and polyunsaturated fatty acids, tocopherols and phenolic compounds. L. turpis methanolic extract showed the highest antioxidant activity. The absence of hepatoxicity of the methanolic extracts was confirmed in porcine liver primary cells (in vitro conditions). The present study provided new information about wild L. citriolens and L. turpis, comparing their chemical composition and antioxidant properties with other Lactarius species, and expanding the knowledge about this genus.

  16. Microbial and chemical composition of liquid-associated bacteria in goats' rumen and fermenters.

    Science.gov (United States)

    Abecia, L; Soto, E C; Ramos-Morales, E; Molina-Alcaide, E

    2014-10-01

    This study was undertaken to investigate the relationship between chemical composition and microbial profile of rumen liquid-associated bacteria (LAB) in vivo (Murciano-Granadina goats) and in a rumen simulation system (single-flow continuous-culture fermenters). To achieve this aim, analyses of purine bases along with some molecular techniques (quantitative PCR to assess abundance and DGGE to identify biodiversity and bacterial profile) were carried out. A control diet (AHC) based on alfalfa hay (AH) and concentrate (C) in a 1:1 ratio and two experimental diets (AHCBI and AHCBII), in which concentrate was partially replaced with multinutrient blocks, were used. Diets AHCBI and AHCBII included multinutrient blocks differing in the relative amount of two-stage olive cake and the source of protein (sunflower meal vs. fava beans). We aimed to investigate the effect of these blocks on rumen microbiota to evaluate their potential as safe substitutes of cereal-based concentrates. Similar patterns of response to diet were found for chemical composition, microbial abundances and diversity in LAB isolated from goat's rumen and fermenters. Whereas bacterial density (log10 gene copies/g FM: 11.6 and 9.4 for bacteria and methanogens, respectively, in rumen) and diversity indexes (Shannon index: 3.6) were not affected by diet, DGGE analyses showed that bacterial community profile was affected. The cluster analysis suggested differences in bacterial profile between LAB pellets isolated from the rumen of goat and fermenters. A relationship between chemical composition and bacterial community composition in LAB pellets seems to exist. Changes in the former were reflected in the bacterial community profile. Further research is needed to clarify the relationship between chemical and microbial composition of ruminal bacterial pellets with diets of different quality.

  17. Electrical Conductivity and Chemical Composition of Soil Solution: Comparison of Solution Samplers in Tropical Soils

    Directory of Open Access Journals (Sweden)

    Davi Lopes do Carmo

    2016-01-01

    Full Text Available ABSTRACT Soil solution samplers may have the same working principle, but they differ in relation to chemical and physical characteristics, cost and handling, and these aspects exert influence on the chemical composition of the soil solution obtained. This study was carried out to evaluate, over time, the chemical composition of solutions extracted by Suolo Acqua, with the hydrophilic membrane (HM as a standard, using soils with contrasting characteristics, and to determine the relationship between electrical conductivity (EC and concentration of ions and pH of soil solution samples. This study was carried out under laboratory conditions, using three soils samples with different clay and organic matter (OM contents. Soil solution contents of F−, Cl−, NO−3, Br−, SO42−, Na+, NH4+, K+, Mg2+, Ca2+, were analyzed, as well as inorganic, organic, and total C contents, pH, and EC, in four successive sampling times. Soil solution chemical composition extracted by the Suolo Acqua sampler is similar to that collected by the HM, but the Suolo Acqua extracted more Na+ and soluble organic C than the HM solution. Solution EC, cation and anion concentrations, and soluble C levels are higher in the soil with greater clay and OM contents (Latossolo and Cambissolo in this case. Soil solution composition varied over time, with considerable changes in pH, EC, and nutrient concentrations, especially associated with soil OM. Thus, single and isolated sampling of the soil solution must be avoided, otherwise composition of the soil solution may not be correctly evaluated. Soil solution EC was regulated by pH, as well as the sum of cation and anion concentrations, and the C contents determined in the soil liquid phase.

  18. Physico-chemical properties of Brazilian cocoa butter and industrial blends. Part I Chemical composition, solid fat content and consistency

    Directory of Open Access Journals (Sweden)

    Ribeiro, A. P. B.

    2012-03-01

    Full Text Available A comparative study of the primary properties of six cocoa butter samples, representative of industrial blends and cocoa butter extracted from fruits cultivated in different geographical areas in Brazil is presented. The samples were evaluated according to fatty acid composition, triacylglycerol composition, regiospecific distribution, melting point, solid fat content and consistency. The results allowed for differentiating the samples according to their chemical compositions, thermal resistance properties, hardness characteristics, as well as technological adequacies and potential use in regions with tropical climates.

    En este trabajo se presenta un estudio comparativo de las propiedades primarias de mantecas de cacao, representativas de las mezclas industriales, y de la manteca de cacao original de diferentes zonas geográficas de Brasil. Las muestras fueron evaluadas de acuerdo a la composición de ácidos grasos, composición de triglicéridos, distribución de los ácidos grasos en las moléculas de triglicéridos, punto de fusión, contenido de grasa sólida y consistencia. Los resultados permitieron diferenciar las muestras por su composición química, propiedades de resistencia térmica, características de dureza, así como en materia de adecuaciones tecnológicas y los usos potenciales en las regiones de clima tropical.

  19. Chemical composition of groundwater/drinking water and oncological disease mortality in Slovak Republic.

    Science.gov (United States)

    Rapant, S; Cvečková, V; Fajčíková, K; Dietzová, Z; Stehlíková, B

    2017-02-01

    This study deals with the analysis of relationship between chemical composition of the groundwater/drinking water and the data on mortality from oncological diseases (MOD) in the Slovak Republic. Primary data consist of the Slovak national database of groundwater analyses (20,339 chemical analyses, 34 chemical elements/compounds) and data on MOD (17 health indicators) collected for the 10-year period (1994-2003). The chemical and health data were unified in the same form and expressed as the mean values for each of 2883 municipalities within the Slovak Republic. Pearson and Spearman correlation as well as artificial neural network (ANN) methods were used for analysis of the relationship between chemical composition of groundwater/drinking water and MOD. The most significant chemical elements having influence on MOD were identified together with their limit values (limit and optimal contents). Based on the results of calculations, made through the neural networks, the following eight chemical elements/parameters in the groundwater were defined as the most significant for MOD: Ca + Mg (mmol l(-1)), Ca, Mg, TDS, Cl, HCO3, SO4 and NO3. The results document the highest relationship between MOD and groundwater contents of Ca + Mg (mmol l(-1)), Ca and Mg. We observe increased MOD with low (deficit) contents of these three parameters of groundwater/drinking water. The following limit values were set for the most significant groundwater chemicals/parameters: Ca + Mg 1.73-5.85 mmol l(-1), Ca 60.5-196.8 mg l(-1) and Mg 25.6-35.8 mg l(-1). At these concentration ranges, the mortality for oncological diseases in the Slovak Republic is at the lowest levels. These limit values are about twice higher in comparison with the current Slovak valid guideline values for the drinking water.

  20. Surface chemical composition of human maxillary first premolar as assessed by X-ray photoelectron spectroscopy (XPS)

    Energy Technology Data Exchange (ETDEWEB)

    Lou, Leo [Orthodontic Graduate Program, Faculty of Medicine and Dentistry, University of Alberta (Canada); Nelson, Alan E. [Department of Chemical and Materials Engineering, University of Alberta (Canada)], E-mail: aenelson@dow.com; Heo, Giseon [Department of Statistics, Department of Dentistry, University of Alberta (Canada); Major, Paul W. [Orthodontic Graduate Program, Faculty of Medicine and Dentistry, University of Alberta (Canada)

    2008-08-30

    The surface chemical composition of dental enamel has been postulated as a contributing factor in the variation of bond strength of brackets bonded to teeth, and hence, the probability of bracket failure during orthodontic treatment. This study systematically investigated the chemical composition of 98 bonding surfaces of human maxillary premolars using X-ray photoelectron spectroscopy (XPS) to ascertain compositional differences between right and left first premolars. The major elements detected in all samples were calcium, phosphorus, oxygen, nitrogen and carbon. Surface compositions were highly variable between samples and several elements were found to be highly correlated. No statistical significant difference in the chemical composition of the maxillary right and left first premolars was found (p > 0.05). Knowledge of the chemical composition of enamel surfaces will facilitate future studies that relate this information to the variations in dental enamel bond strength.

  1. Relating particle hygroscopicity and CCN activity to chemical composition during the HCCT-2010 field campaign

    Directory of Open Access Journals (Sweden)

    Z. J. Wu

    2013-03-01

    Full Text Available Particle hygroscopic growth at RH =90%, cloud condensation nuclei (CCN activity, and size-resolved chemical composition were concurrently measured in the Thüringer Wald mid-level mountain range in central Germany in fall season of 2010. The median hygroscopicity parameter values, κ, of 50, 75, 100, 150, 200, and 250 nm particles derived from hygroscopicity measurements are respectively 0.14, 0.14, 0.17, 0.21, 0.24, and 0.28 during the sampling period. The closure between HTDMA-measured (κHTDMA and chemical composition-derived (κchem hygroscopicity parameters was performed based on the Zdanovskii–Stokes–Robinson (ZSR mixing rule. Using size-averaged chemical composition, the κ values are substantially overpredicted (30% and 40% for 150 and 100 nm particles. Introducing size-resolved chemical composition substantially improved closure, and the differences between κHTDMA and κchem are within 10%. We found that the evaporation of NH4NO3, which may happen in H-TDMA system, could lead to a discrepancy in predicted and measured particle hygroscopic growth. The hygroscopic parameter of the organic fraction, κorg is positively correlated with the O : C ratio (κorg =0.19 · (O : C−0.03. Such correlation is helpful to define the κorg value in the closure study. κ derived from CCN measurement was around 30% (varied with particle diameters higher than that determined from particle hygroscopic growth measurements (here, hydrophilic mode is considered only. This difference might be explained by the surface tension effects, solution non-ideality, and the partial solubility of constituents or non-dissolved particle matter. However, due to these effects being included in HTDMA-derived κ calculations, we could not distinguish the specific roles of these effects in creating this gap. Therefore, extrapolating from HTDMA data to properties at the point of activation should be done with great care. Finally, closure study between CCNc-measured (κ

  2. Investigation of the chemical composition-antibacterial activity relationship of essential oils by chemometric methods.

    Science.gov (United States)

    Miladinović, Dragoljub L; Ilić, Budimir S; Mihajilov-Krstev, Tatjana M; Nikolić, Nikola D; Miladinović, Ljiljana C; Cvetković, Olga G

    2012-05-01

    The antibacterial effects of Thymus vulgaris (Lamiaceae), Lavandula angustifolia (Lamiaceae), and Calamintha nepeta (Lamiaceae) Savi subsp. nepeta var. subisodonda (Borb.) Hayek essential oils on five different bacteria were estimated. Laboratory control strain and clinical isolates from different pathogenic media were researched by broth microdilution method, with an emphasis on a chemical composition-antibacterial activity relationship. The main constituents of thyme oil were thymol (59.95%) and p-cymene (18.34%). Linalool acetate (38.23%) and β-linalool (35.01%) were main compounds in lavender oil. C. nepeta essential oil was characterized by a high percentage of piperitone oxide (59.07%) and limonene (9.05%). Essential oils have been found to have antimicrobial activity against all tested microorganisms. Classification and comparison of essential oils on the basis of their chemical composition and antibacterial activity were made by utilization of appropriate chemometric methods. The chemical principal component analysis (PCA) and hierachical cluster analysis (HCA) separated essential oils into two groups and two sub-groups. Thyme essential oil forms separate chemical HCA group and exhibits highest antibacterial activity, similar to tetracycline. Essential oils of lavender and C. nepeta in the same chemical HCA group were classified in different groups, within antibacterial PCA and HCA analyses. Lavender oil exhibits higher antibacterial ability in comparison with C. nepeta essential oil, probably based on the concept of synergistic activity of essential oil components.

  3. Processing–structure–property relations of chemically bonded phosphate ceramic composites

    Indian Academy of Sciences (India)

    H A Colorado; C Hiel; H T Hahn

    2011-07-01

    Mechanical properties and microstructures of a chemically bonded phosphate ceramic (CBPC) and its composite with 1.0 wt% graphite nanoplatelets (GNPs) reinforcement have been investigated. Microstructure was identified by using optical and scanning electron microscopes, X-ray tomography, and X-ray diffraction. In addition, weight loss of the resin at room temperature was studied. The microstructure characterization shows that CBPC is itself a composite with several crystalline (wollastonite and brushite) and amorphous phases. SEM and micro tomography show a homogeneous distribution of crystalline phases. Bending and compression strength of the CBPC was improved by reducing bubbles via preparation in vacuum.

  4. Chemical composition of volatile oils from leaves of Nectandra megapotamica Spreng. (Lauraceae)

    Energy Technology Data Exchange (ETDEWEB)

    Romoff, Paulete; Ferreira, Marcelo J.P., E-mail: romoff@mackenzie.b [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil). Centro de Ciencias e Humanidades; Padilla, Ricardo; Toyama, Daniela O.; Favero, Oriana A. [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil). Centro de Ciencias Biologicas e da Saude; Lago, Joao Henrique G. [Universidade Federal de Sao Paulo (UNIFESP), Diadema, SP (Brazil). Dept. de Ciencias Exatas e da Terra

    2010-07-01

    The volatile oils from Nectandra megapotamica Spreng. leaves, collected in February and August of 2007 and at 7:00 and 12:00 h (samples A - D), were extracted by hydrodistillation and the chemical composition was analyzed by GC-FID and GC/MS. A total of nineteen compounds were identified with predominance of oxygenated sesquiterpenes, among them, a-bisabolol, was the main constituent (62.3-69.4 %). After chromatographic separation procedures, this compound was purified from crude oil and its structure was confirmed by analysis of NMR data. This paper describes for the first time the composition of the leaves volatile oil from N. megapotamica. (author)

  5. Chemically produced tungsten-praseodymium oxide composite sintered by spark plasma sintering

    Science.gov (United States)

    Ding, Xiao-Yu; Luo, Lai-Ma; Lu, Ze-Long; Luo, Guang-Nan; Zhu, Xiao-Yong; Cheng, Ji-Gui; Wu, Yu-Cheng

    2014-11-01

    Pr2O3 doped W composite were synthesized by a novel wet chemical method and spark plasma sintering. The grain size, relative density and the Vicker hardness HV0.2 of Pr2O3/W samples were 4 μm, 98.3% and 377.2, respectively. The tensile strength values of Pr2O3/W were higher than those of pure W. As the temperature rises from 25 °C to 800 °C, the conductivity of pure W and W-1 wt% Pr2O3 composites decreased with the same trend, was above 150 W/m K.

  6. Diffusion in plasma: the Hall effect, compositional waves, and chemical spots

    CERN Document Server

    Urpin, Vadim

    2016-01-01

    We consider diffusion caused by a combined influence of the electric current and the Hall effect, and argue that such diffusion can form inhomogeneities of the chemical composition in plasma. The considered mechanism can be responsible for a formation of element spots in laboratory and astrophysical plasmas. This current-driven diffusion can be accompanied by propagation of a particular type waves in which the impurity number density oscillate alone. These compositional waves exist if the magnetic pressure in plasma is much greater than the gas pressure,

  7. Is there a chemical interaction between calcium phosphates and organic compounds in the organic/inorganic composites?

    Energy Technology Data Exchange (ETDEWEB)

    Dorozhkin, S.V. [Research Inst. of Fertilisers, Moscow (Russian Federation)

    2001-07-01

    Solid composites of three biologically relevant calcium phosphates and hydroxypropylmethylcellulose (HPMC) were prepared at temperatures of 121 C. Properties of the composites obtained were studied by FTIR, X-ray diffraction, and SEM techniques. Special attention was devoted to seeking of a possible chemical interaction between the calcium phosphates and HPMC. No chemical interaction was found. Thus, HPMC was proven to have no influence on the chemical properties of calcium phosphates. (orig.)

  8. Planet signatures in the chemical composition of Sun-like stars

    CERN Document Server

    Melendez, Jorge

    2016-01-01

    There are two possible mechanisms to imprint planet signatures in the chemical composition of Sun-like stars: i) dust condensation at the early stages of planet formation, causing a depletion of refractory elements in the gas accreted by the star in the late stages of its formation; ii) planet engulfment, enriching the host star in lithium and refractory elements. We discuss both planet signatures, the influence of galactic chemical evolution, and the importance of binaries composed of stellar twins as laboratories to verify abundance anomalies imprinted by planets.

  9. Chemical Composition and Antimicrobial Activity of Echinophora spinosa L. (Apiaceae Essential Oil

    Directory of Open Access Journals (Sweden)

    Jasmina M. Glamočlija

    2011-01-01

    Full Text Available The present study was undertaken to investigate the chemical composition and effectiveness of the essential oil isolated from Echinophora spinosa on different bacterial and fungal species. Chemical analysis (GC/MS showed that δ³-carene (60,86 %, α-phellandrene (7,12%, p-cymene (6,22 %, myrcene (4,82 % and β-phellandrene (2,73 % were dominant components in this oil. Essential oil tested showed good antimicrobial activity. Antimicrobial potential of this oil was higher than potential of commercial antimicrobial drugs tested, streptomycin, bifonozole and ketoconazole.

  10. Simulation of Gas Detonation Propagation in a Medium Having Variable Chemical Composition

    Science.gov (United States)

    Prokhorov, E. S.

    2017-01-01

    Within the framework of a quasi-one-dimensional approximation, a mathematical model of the propagation of a detonation wave in a tube filled with explosive gas mixture with spatially variable chemical composition has been formulated, and the respective problem has been solved numerically. The shift in the chemical equilibrium of detonation products as well as the friction and heat removal losses were taken into account. The proposed mathematical model allows one to describe steady-state (of Chapman-Jouguet) and over-compressed detonation regimes.

  11. Morphology tailoring of nano/micro-structured conductive polymers, composites and their applications in chemical sensors.

    Science.gov (United States)

    Ma, Xingfa; Gao, Mingjun; He, Xiaochun; Li, Guang

    2010-11-01

    Conductive polymer is one of the important multi-functional materials. It has many applications in light-emitting diodes, chemical sensors, biosensors, et al. This paper provides a relatively comprehensive review on the progress of conductive polymer and composite as sensitive film for sensors to chemical vapors including patents, papers and our preliminary research results. Especially, the feature of conjugated polymers, the processing technology, doping characteristics and some factors affecting gas responses are discussed. Otherwise, the developments of nanostructured conductive polymer and organic-inorganic hybrid film sensor with high sensitivity and rapid response to vapors are also described, and some suggestions are proposed.

  12. Chemical Composition and Dynamics of the Upper Troposphere and the Lower Stratosphere: Overview of the Project

    Science.gov (United States)

    Sofieva, V. F.; Liu, C.; Huang, F.; Kyrola, E.; Liu, Y.; Ialongo, I.; Hakkarainen, J.; Zhang, Y.

    2016-08-01

    The DRAGON-3 cooperation study on the upper troposphere and the lower stratosphere (UTLS) is based on new satellite data and modern atmospheric models. The objectives of the project are: (i) assessment of satellite data on chemical composition in UTLS, (ii) dynamical and chemical structures of the UTLS and its variability, (iii) multi-scale variability of stratospheric ozone, (iv) climatology of the stratospheric aerosol layer and its variability, and (v) updated ozone climatology and its relation to tropopause/multiple tropopauses.In this paper, we present the main results of the project.

  13. Revised Phase Diagram of the Gross-Neveu Model

    CERN Document Server

    Thies, M; Thies, Michael; Urlichs, Konrad

    2003-01-01

    We confirm earlier hints that the conventional phase diagram of the discrete chiral Gross-Neveu model in the large N limit is deficient at non-zero chemical potential. We present the corrected phase diagram constructed in mean field theory. It has three different phases, including a kink-antikink crystal phase. All transitions are second order. The driving mechanism for the new structure of baryonic matter in the Gross-Neveu model is an Overhauser type instability with gap formation at the Fermi surface.

  14. NM Gross Receipts July - December 2012

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  15. NM Gross Receipts January - June 2014

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  16. NM Gross Receipts January - June 2012

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  17. NM Gross Receipts January - June 2013

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  18. NM Gross Receipts January - June 2011

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  19. NM Gross Receipts July - December 2013

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This layer represents boundaries for New Mexico's gross receipts tax districts as identified on the "Gross Receipts Tax Rate Schedule" published by the Taxation and...

  20. Chemical Composition and Fatty Acids of Glodok Fish by High Thermal Processing

    Directory of Open Access Journals (Sweden)

    Sri Purwaningsih

    2014-11-01

    Full Text Available Glodok is an economically underrated fish with a high nutrient content. The research aims to study the changes on chemical composition, fatty acids, omega-6 and omega-3 ratio in glodok muscle after processing with different methods of boiling, steaming, and boiling with addition of salt (3%. The results showed that the treatment (boiling, steaming, and boiling with addition of salt gives a significant effect (α=0.05 in water content, ash, lipid content, nervonat acid, linoleic acid, arachidonic acid, EPA, and DHA. The best processing method was steaming. The ratio of omega-3 and omega-6 in fresh glodok fish was 2,1:1, which is higher than WHO recommendation of 0,6:1,7.Keywords: chemical composition, fatty acid, glodok fish, processing

  1. Chemical composition and antimicrobial activity of the essential oils of Pinus pinaster

    Institute of Scientific and Technical Information of China (English)

    Nouara Ait Mimoune; Djouher Ait Mimoune; Aziza Yataghene

    2013-01-01

    Objective: To investigate the antimicrobial activity and chemical composition of essential oils ofPinus pinaster. Methods: Essential oils were extracted from the needles by hydrodistillation. The chemical composition of the obtained essential oils was analyzed using GC-MS technique. The antimicrobial potential has been tested against six microorganisms performing the disc diffusion assay.Results:Twenty-three components have been identified. β-caryophyllene (30.9%) and β-selinene (13.45%) were predominant compounds. The essential oil exhibited a moderate activity againstStaphylococcus aureus, Bacillus subtilis and Escherichia coli, but did not affect the growth of Erwinia amylovora. Aspergillus flavus and Aspergillus niger were not inhibited by maritime pine essential oils.Conclusions:The essential oils from Pinus pinaster can be used as an antibacterial agent.

  2. Antioxidant properties, physico-chemical characteristics and proximate composition of five wild fruits of Manipur, India.

    Science.gov (United States)

    Sharma, Ph Baleshwor; Handique, Pratap Jyoti; Devi, Huidrom Sunitibala

    2015-02-01

    Antioxidant properties, physico-chemical characteristics and proximate composition of five wild fruits viz., Garcinia pedunculata, Garcinia xanthochymus, Docynia indica, Rhus semialata and Averrhoa carambola grown in Manipur, India were presented in the current study. The order of the antioxidant activity and reducing power of the fruit samples was found as R. semialata > D. indica > G. xanthochymus > A. carambola > G. pedunculata. Good correlation coefficient (R(2) > 0.99) was found among the three methods applied to determine antioxidant activity. Total phenolic content was positively correlated (R(2) = 0.960) with the antioxidant activity however, total flavonoid content was not positively correlated with the antioxidant activity. Physico-chemical and proximate composition of these fruits is documented for the first time.

  3. Effect of enzyme addition to forage at ensiling on silage chemical composition and NDF degradation characteristics

    DEFF Research Database (Denmark)

    Dehghani, Mohammad Reza; Weisbjerg, Martin Riis; Hvelplund, Torben

    2012-01-01

    The effect of different exogenous fibrolytic enzymes added to forages at ensiling was examined for effect on chemical composition and in vitro NDF degradability characteristics of the resulting silage. Maize stover and lucerne were used to study effect on chemical composition in experiment 1...... digestibility decreased in treated maize stover silage. Potential NDF degradability decreased due to enzyme treatments but not for all maize stover treatments. Treatments with combination of enzymes with glucanase, β-glucanase and pectinase activity mostly resulted in increases in fermentation products compared......, and two varieties of maize stover, lucerne and grass clover were used to study NDF degradation characteristics in experiment 2. Forages were treated with enzymes (500 mg crude protein of the enzyme products/kg DM) and ensiled for 60 days in vacuum-sealed bags. Samples of forage (before ensiling...

  4. Evaluation of the Chemical Composition of Brazilian Commercial Cymbopogon citratus (D.C. Stapf Samples

    Directory of Open Access Journals (Sweden)

    Evandro de Castro Melo

    2008-08-01

    Full Text Available Abstract: The concentration and the chemical composition of the essential oils obtained from different samples of Cymbopogon citratus were evaluated. Among the 12 samples investigated (11 dried leaf samples and fresh plant leaves, seven presented essential oil concentrations within the threshold established by the Brazilian legislation. The moisture content was also determined and the majority of the samples presented humidity contents near 12%. The GC and GC/MS analyses of the essential oils led to identification of 22 compounds, with neral and geranial as the two major components. The total percentage of these two compounds varied within the investigated sample oils from 40.7% to 75.4%. In addition, a considerable variation in the chemical composition of the analyzed samples was observed. The process of grinding the leaves significantly decreased (by up to 68% the essential oil content, as well as the percentage of myrcene in the oils.

  5. Qualitative and quantitative studies of chemical composition of sandarac resin by GC-MS.

    Science.gov (United States)

    Kononenko, I; de Viguerie, L; Rochut, S; Walter, Ph

    2017-01-01

    The chemical composition of sandarac resin was investigated qualitatively and quantitatively by gas chromatography-mass spectrometry (GC-MS). Six compounds with labdane and pimarane skeletons were identified in the resin. The obtained mass spectra were interpreted and the mass spectrometric behaviour of these diterpenoids under EI conditions was described. Quantitative analysis by the method of internal standard revealed that identified diterpenoids represent only 10-30% of the analysed sample. The sandarac resin from different suppliers was analysed (from Kremer, Okhra, Color Rare, La Marchande de Couleurs, L'Atelier Montessori, Hevea). The analysis of different lumps of resins showed that the chemical composition differs from one lump to another, varying mainly in the relative distributions of the components.

  6. Influence of chemical group composition of feedstock on results from catalytic cracking

    Energy Technology Data Exchange (ETDEWEB)

    Zhorov, Y.M.; Panchenkov, G.M.; Pivovarova, N.A.

    1983-01-01

    The work reported here is aimed at determining whether it is the distillation range of the chemical composition of the feed that influences the results obtained in catalytic cracking. For a quantitative evaluation of the influence of feedstock chemical composition on the cracking results, a linear equation relating the naptha yield to the contents of the group components is derived. The equation indicates that the ''light'' aromatics form considerable amounts of naptha, whereas the ''heavy'' aromatics retard the cracking. These relationships can be used in developing a mathematical model of the process and in selecting the severity of preliminary treating of catalytic cracking feedstocks.

  7. Chemical composition and in vitro antioxidative potential of essential oil isolated from Curcuma longa L. leaves

    Institute of Scientific and Technical Information of China (English)

    R. Priya; A. Prathapan; K.G Raghu; A. Nirmala Menon

    2012-01-01

    Objective: To determine the chemical composition and antioxidant potential of essential oil isolated from the leaves of Curcuma longa (turmeric). Methods: Chemical composition of the oil was analyzed using GC-MS. Antiperoxidative potential was evaluated using linoliec acid emulsion system. Free radical scavenging activity was evaluated using stable DPPH and ABTS free radicals. Results: GC-MS analyses showed that major compound present in the turmeric leaf oil is b-sesquiphellandrene (22.8%) followed by terpinolene (9.5%). Essential oil also exhibited reductive potential and antioxidant potential in linoleic acid emulsion system along with DPPH and ABTS free radical scavenging potential. Conclusions: The overall result suggests that turmeric leaf oil is capable of retarding oxidation reaction and free radical mediated damage and can be developed as a potent natural antioxidant.

  8. Chemical Composition and Antibacterial Activity of Essential Oils of Two Species of Lamiaceae against Phytopathogenic Bacteria.

    Science.gov (United States)

    Gormez, Arzu; Bozari, Sedat; Yanmis, Derya; Gulluce, Medine; Sahin, Fikrettin; Agar, Guleray

    2015-01-01

    In this study, we aimed to determine chemical composition and antibacterial activities of Satureja hortensis and Calamintha nepeta against to 20 phytopathogenic bacteria causing serious crop loss. The essential oils of S. hortensis and C. nepeta were isolated by the hydrodistillation method and the chemical composition of the essential oils were analyzed by GC-MS. The antibacterial properties of the essential oils were evaluated against 20 phytopathogenic bacteria through Disc diffusion assay and micro dilution assay. The results revealed that the essential oils of S. hortensis and C. nepeta have significant antibacterial activity. Furthermore, the findings of the study are valuable for future investigations focusing on the alternative natural compounds to control plant diseases.

  9. Broadening Our Portfolio in the Genetic Improvement of Maize Chemical Composition.

    Science.gov (United States)

    Wen, Weiwei; Brotman, Yariv; Willmitzer, Lothar; Yan, Jianbing; Fernie, Alisdair R

    2016-08-01

    The adoption of recombinant inbred line and introgression line populations, as well as the study of association mapping panels, has greatly accelerated our ability to identify the genes underlying plant phenotypic variance. In tandem, the development of metabolomics approaches has greatly enhanced our ability to comprehensively define cellular chemical composition. As a consequence, breeding for chemical composition is being extended beyond our traditional targets of oil and protein to include components such as essential amino acids, vitamins, and antioxidant secondary metabolites with considerable purported consequences for human health. Here, we review the above-mentioned developments paying particular attention to the genetic architecture of metabolic traits as well as updating the perspective for utilizing metabolomics in maize improvement.

  10. Chemical composition, phytotoxic and antifungal properties of Ruta chalepensis L. essential oils.

    Science.gov (United States)

    Bouabidi, Wafa; Hanana, Mohsen; Gargouri, Samia; Amri, Ismail; Fezzani, Tarek; Ksontini, Mustapha; Jamoussi, Bassem; Hamrouni, Lamia

    2015-01-01

    The chemical composition, and phytotoxic and antifungal activities of the essential oils isolated by using hydrodistillation from the aerial parts of Tunisian rue were evaluated. Significant variations were observed among harvest periods. The analysis of the chemical composition by gas chromatography/mass spectrometry showed that 2-undecanone (33.4-49.8%), 2-heptanol acetate (13.5-15.4%) and α-pinene (9.8-11.9%) were the main components. The antifungal ability of rue essential oils was tested by using disc agar diffusion against ten plant pathogenic fungi. A high antifungal activity was observed for the essential oil isolated at flowering developmental phase. Furthermore, rue essential oils showed high level of herbicidal activity against several weeds.

  11. Anionic markers for the forensic identification of Chemical Ignition Molotov Cocktail composition.

    Science.gov (United States)

    Martín-Alberca, C; Ferrando, J L; García-Ruiz, C

    2013-03-01

    An improved version of the famous Molotov cocktail is the Chemical Ignition Molotov Cocktail (CIMC). This incendiary device contains chemical reagents that enable its self-ignition. The analysis of anions from CIMC residues by capillary electrophoresis (CE) allows the identification of the reagents used to produce the device, and provides forensic analysts with valuable information. Although, sulfate, chlorate, chloride, and perchlorate anions have been recently proposed in the literature as target anions to determine the CIMC composition, the identification of some of them could be controversial due to their presence in the environment. Therefore, the purpose of this study was to identify highly reliable anions capable of indicating the components used to prepare these self-initiated devices. The relationship among the detected anions in CIMC residues and the reagents employed in their elaboration is discussed. Some anions have been proposed as anionic markers of CIMC as incendiary devices. Additionally, the viability of different CIMC compositions was studied.

  12. Design and control of chemical compositions for high-performance austempered ductile iron

    Directory of Open Access Journals (Sweden)

    Gong Wenbang

    2012-05-01

    Full Text Available This paper presents the effects of chemical compositions of austempered ductile iron (ADI on casting quality, heat treatment process parameters and mechanical properties of final products. Through experiment and production practice, the impacts of carbon equivalent on ADI and its mechanical properties have been studied. Proper content ranges for carbon and silicon have been obtained to avoid ADI casting shrinkage and graphite floatation, as well as to achieve the optimal mechanical properties. According to the impact of silicon content on austenite phase transformation, the existing form of carbon in ADI has been analyzed, and also the formula and diagram showing the relationship between austenitizing temperature and carbon content in austenite have been deduced. The chemical composition range for high performance ADI and its control points have been recommended, to serve as a reference for production process.

  13. Effect of Crossbreed on the Muscle Quality (Chemical Composition) in Yun-Ling Black Goats

    Institute of Scientific and Technical Information of China (English)

    JIA Jun-jing; TIAN Yun-bo; ZHANG Xi; HUANG Qi-chao; WEN Sheng-ping; GU Feng-ying; GE Chang-rong; CAO Zhen-hui; CHENG Zhi-bin; M. Jois

    2009-01-01

    Twenty castrated male goats, each of Yun-Ling Black goats (YLB goat), N×YLB hybrid goats (Nubian ♂×Yun-Ling Black goats ♀) and B×YLB hybrid goats (Boer ♂×Yun-Ling Black goats ♀), were used to evaluate the effect of crossbreeding on the meat chemical composition in the YLB goats of China. After weaning of 90 days, all the experimental goats were reared on natural pasture when they were slaughtered at an age of 730 days. The longissimus dorsi (LD) and biceps femoris (BF) muscles were sampled from each carcass to determine chemical compositions. Both hybrid goats had higher protein content (P0.05). The YLB goats had significantly higher (P0.05). In contrast, the proportion of poly-unsaturated in the YLB goats was significantly lower (P<0.05) than that in the hybrid goats.

  14. Chemical composition and antimicrobial activity of the essential oils of Pinus pinaster

    Directory of Open Access Journals (Sweden)

    Nouara Ait Mimoune

    2013-08-01

    Full Text Available Objective: To investigate the antimicrobial activity and chemical composition of essential oils of Pinus pinaster. Methods: Essential oils were extracted from the needles by hydrodistillation. The chemical composition of the obtained essential oils was analyzed using GC-MS technique. The antimicrobial potential has been tested against six microorganisms performing the disc diffusion assay. Results: Twenty-three components have been identified. β-caryophyllene (30.9% and β-selinene (13.45% were predominant compounds. The essential oil exhibited a moderate activity against Staphylococcus aureus, Bacillus subtilis and Escherichia coli, but did not affect the growth of Erwinia amylovora. Aspergillus flavus and Aspergillus niger were not inhibited by maritime pine essential oils. Conclusions: The essential oils from Pinus pinaster can be used as an antibacterial agent.

  15. Surge-Resistant Nanocomposite Enameled Wire Using Silica Nanoparticles with Binary Chemical Compositions on the Surface

    Directory of Open Access Journals (Sweden)

    Jeseung Yoo

    2015-01-01

    Full Text Available We developed polyesterimide (PEI nanocomposite enameled wires using surface-modified silica nanoparticles with binary chemical compositions on the surface. The modification was done using silanes assisted by ultrasound, which facilitated high density modification. Two different trimethoxysilanes were chosen for the modification on the basis of resemblance of chemical compositions on the silica surface to PEI varnish. The surface-modified silica was well dispersed in PEI varnish, which was confirmed by optical observation and viscosity measurement. The glass transition temperature of the silica-PEI nanocomposite increased with the silica content. The silica-dispersed PEI varnish was then used for enameled wire fabrication. The silica-PEI nanocomposite enameled wire exhibited a much longer lifetime compared to that of neat PEI enameled wire in partial discharge conditions.

  16. Determination of Chemical Compositions on Adult Kidney Stones—A Spectroscopic Study

    Science.gov (United States)

    Raju, K.; Rakkappan, C.

    2008-11-01

    The chemical compositions of the kidney stones of both the sexes of patients, aged from 40 to 70, living in and around Chidambaram town are determined by using FT-IR and X-RD technique. The kidney stone samples used in the present study were procured from the Rajah Muthiah Medical College and Hospital, Annamalai University. The FT-IR spectra of different kidney stone samples were recorded in the range of 4000-400 cm-1. By identifying the characteristic frequency, the chemical compositions of the samples are determined. The results analyzed by FTIR technique were confirmed by X-RD method, in which the recorded X-ray diffractogram are compared with JCPDS files using search match method. Further analysis of XRD pattern also reveals the same.

  17. Chemical composition and antibacterial activity of essential oils from Myrcia alagoensis (Myrtaceae).

    Science.gov (United States)

    Silva, Aline do N; Uetanabaro, Ana Paula T; Lucchese, Angélica M

    2013-02-01

    The chemical composition and antibacterial activity of essential oils obtained from fresh and dried leaves of Myrcia alagoensis O. Berg, collected in a secondary forest remnant in north-eastern Brazil, was compared. The essential oils were obtained by hydrodistillation from fresh and dried leaves, and analysed by GC/FID and GC/MS. The antimicrobial properties of the oils were investigated against five bacteria by determination of the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC). The essential oils were rich in cyclic sesquiterpenes, such as germacrene B, with antibiotic action against Gram-positive and Gram-negative bacteria. The drying process after collection interfered with the chemical composition and antibacterial activity of the assessed samples.

  18. [Characteristics of chemical composition of glass finds from the Qiemo tomb sites on the Silk Road].

    Science.gov (United States)

    Cheng, Qian; Guo, Jin-Long; Wang, Bo; Cui, Jian-Feng

    2012-07-01

    Qiemo was an ancient country on the south branch of the Silk Road. The Zagunluke tomb site is located at the Qiemo County of the Xinjiang Uygur Autonomous Region. Glass beads and only colourless glass cup were excavated from the 3rd cultural layer of the tomb site M133 and M49, dated between the 1st AD-6th AD. LA-ICP-AES was applied to analyse chemical composition of these glass finds with the corning glass as reference. According to the result, characteristics of chemical composition are very similar to typical soda-lime glass, which indicates the glasses were imported productions from the west. These soda-lime glasses were divided into two groups in terms of flux source: natron glass and plant ash glass. This analytical research indicates the history of glass trade and communication between the East and the West on the Silk Road.

  19. Low temperature impact strength of heavy section ductile iron castings: effects of microstructure and chemical composition

    Directory of Open Access Journals (Sweden)

    C. Labrecque

    2011-02-01

    Full Text Available A foundry research project has been recently initiated at RTIT in order to better understand the fabrication of as-cast heavy section DI parts meeting high impact energy requirements at low temperatures. The experimental castings have the following dimensions 180 mm x 180 mm x 190 mm. The achieved as-cast Charpy impact strengths were as follows: 17 J (RT, 16 J (-20°C and 11 J (-40°C. The foundry process, the chemical composition and the microstructure of this experimental casting are compared to the ones of various examples in order to show the detrimental effects of residual elements, microshrinkage and microcarbide on the impact properties. Finally, quality index empirical models (based on casting chemical compositions are used to analyse the impact tests results. This paper illustrates that an adequate nodule count can contribute to reducing the detrimental effects of the residual elements and microsegregation.

  20. Chemically Modified Ordered Mesoporous Carbon/Polyaniline Composites for Electrochemical Capacitors

    Institute of Scientific and Technical Information of China (English)

    KONG Ling-bin; ZHANG Jing; CAI Jian-jun; YANG Zhen-sheng; LUO Yong-chun; KANG Long

    2011-01-01

    Chemically modified ordered mesoporous carbon CMK-3 materials were prepared by means of an easy wet-oxidative method in 2 mol/L nitric acid aqueous solution. A large amount of oxygen-containing functional groups were introduced onto the CMK-3 surface. Modified CMK-3(m-CMK-3) and aniline monomer were polymerized via an in situ chemical oxidative polymerization method. Morphological characterizations of m-CMK-3/PANI (polyaniline) composites were carried out via field emission scanning electron microscopy(SEM). Their electrochemical properties were investigated with cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The m-CMK-3/PANI composites have excellent properties in capacitance, and the highest specific capacitance(SC) value was up to 489 F/g, suggesting their potential application in the electrode material for electrochemical capacitors.

  1. The Chemical Compositions of Thermal Waters at Ciarinem and Cilayu, Pameungpeuk, West Java - Indonesia

    Directory of Open Access Journals (Sweden)

    N.R. Herdianita

    2008-03-01

    Full Text Available Thermal waters at Ciarinem and Cilayu, Pameungpeuk, West Java, Indonesia have different characteristics: Ciarinem water is a steam heated sulfate type and occurs as hot springs, whereas Cilayu water discharges as hot pools and is a chloride water type. Their chemical compositions indicate that the thermal waters are outflows of a volcanic–magmatic associated geothermal system. The solute geothermometers calculate that the subsurface reservoir temperatures range from 150o to 200ºC.

  2. Factors affecting the microbial and chemical composition of silage. IV. Effect of wilting on maize silage.

    Science.gov (United States)

    Mahmoud, S A; Abdel-Hafez, A; Zaki, M M; Saleh, E A

    1979-01-01

    The effect of wilting on the microbial and chemical composition of ensiled maize plants was studied. Wilting stimulated high densities of lactic acid bacteria, with the decrease in counts of undesirable flora, i.e., yeasts, moulds, proteolytic and saccharolytic anaerobes, causing spoilage of silage. Moreover, wilting decreased the losses of dry matter, total acidity, and butyric acid content of silage. Accordingly, wilting proved to be a favourable treatment for the production of good quality silage from maize plants.

  3. Chemical composition analysis of raw materials used in iron ore sinter plants in Poland

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2014-07-01

    Full Text Available The main goal of the study was the analysis of the chemical compositions of raw materials used in iron ore sinter plants in Poland. The iron ore sintering process is the largest source of emissions of dust and gas pollution in the iron and steel industry. Hematite ores, magnetite concentrates, admixtures (dolomite, limestone and burnt lime, fuels (coke breeze, anthracite and by-products are used in Poland to produce the sinter mixture.

  4. Ensiling on chemical composition and in vitro fermentation in rabbits of different forages

    OpenAIRE

    Juan Carlos Angeles Hernandez; Karla Ivonne Valdes Medina; Amelia Zetina Sanchez; Octavio Alonso Castelan Ortega; Andres Morales Osorio; Maria de Guadalupe Gutierrez; Manuel Gonzalez Ronquillo

    2017-01-01

    ABSTRACT: The effect of chemical composition of silages on in vitro gas fermentation profiles in rabbits was examined. The study was performed using 7 silages: beans (Phaseolus vulgaris), faba bean (FB, Vicia faba), common vetch (CV, Vicia sativa), ryegrass (Lolium perenne), barley (B, Hordeum vulgare), barley with common vetch (BCV) and barley with faba bean (BFB). We used 3 New Zealand White (NZW) rabbits as donors of caecal content in each incubation run (n=3). Data were analyzed in a comp...

  5. Neem cake: chemical composition and larvicidal activity on Asian tiger mosquito.

    Science.gov (United States)

    Nicoletti, Marcello; Mariani, Susanna; Maccioni, Oliviero; Coccioletti, Tiziana; Murugan, Kardaray

    2012-07-01

    New pesticides based on natural products are urgently needed, in consideration of their environmental care and lower collateral effects. Neem oil, the main product obtained from Azadiractha indica A. Juss, commonly known as neem tree, is mainly used in medical devices, cosmetics and soaps, as well as important insecticide. Manufacturing of neem oil first includes the collection of the neem seeds as raw material used for the extraction. Neem cake is the waste by-product remaining after extraction processes. The quality of the oil, as that of the cake, strictly depends from the quality of seeds as well as from the type of extraction processes used, which strongly influences the chemical composition of the product. Currently, the different types of commercial neem cake on the market are roughly identified as oiled and deoiled cake, but several other differences can be detected. The differences are relevant and must be determined, to obtain the necessary correlation between chemical constitution and larvicidal activities. Six different batches of neem cake, marketed by several Indian and European companies, were analyzed by HPLC and HPTLC, and their fingerprints compared, obtaining information about the different compositions, focusing in particular on nortriterpenes, considered as the main active components of neem oil. Therefore, the chemical composition of each cake was connected with the biological activitiy, i.e., the effects of the extracts of the six neem cakes were tested on eggs and larvae of Aedes albopictus (Stegomyia albopicta) (Diptera: Culicidae), commonly known as Asian tiger mosquito. The results confirmed the previously reported larvicide effects of neem cake that, however, can now be related to the chemical composition, in particular with nortriterpenes, allowing in that way to discriminate between the quality of the various marketed products, as potential domestic insecticides.

  6. Chemical composition and antibacterial activity of essential oil of Pulicaria odora L.

    Science.gov (United States)

    Hanbali, Fadwa E L; Akssira, Mohamed; Ezoubeiri, Aicha; Gadhi, Chems Eddoha A; Mellouki, Fouad; Benherraf, Ahmed; Blazquez, Amparo M; Boira, Herminio

    2005-07-14

    The chemical composition of the volatile oil constituent from Pulicaria odora L. roots has been analyzed by GC/MS. Twenty-seven components were identified, being thymol (47.83%) and its derivative isobutyrate (30.05%) the main constituents in the oil. Furthermore, the oil was tested against seven bacteria at different concentrations. Results showed that the oil exhibited a significant antibacterial activity.

  7. Concentration of mycotoxins and chemical composition of corn silage: a farm survey using infrared thermography.

    Science.gov (United States)

    Schmidt, P; Novinski, C O; Junges, D; Almeida, R; de Souza, C M

    2015-09-01

    This work evaluated the chemical composition and mycotoxin incidence in corn silage from 5 Brazilian dairy-producing regions: Castro, in central-eastern Paraná State (n=32); Toledo, in southwestern Paraná (n=20); southeastern Goiás (n=14); southern Minas Gerais (n=23); and western Santa Catarina (n=20). On each dairy farm, an infrared thermography camera was used to identify 3 sampling sites that exhibited the highest temperature, a moderate temperature, and the lowest temperature on the silo face, and 1 sample was collected from each site. The chemical composition and concentrations of mycotoxins were evaluated, including the levels of aflatoxins B1, B2, G1, and G2; zearalenone; ochratoxin A; deoxynivalenol; and fumonisins B1 and B2. The corn silage showed a highly variable chemical composition, containing, on average, 7.1±1.1%, 52.5±5.4%, and 65.2±3.6% crude protein, neutral detergent fiber, and total digestible nutrients, respectively. Mycotoxins were found in more than 91% of the samples, with zearalenone being the most prevalent (72.8%). All samples from the Castro region contained zearalenone at a high average concentration (334±374µg/kg), even in well-preserved silage. The incidence of aflatoxin B1 was low (0.92%). Silage temperature and the presence of mycotoxins were not correlated; similarly, differences were not observed in the concentration or incidence of mycotoxins across silage locations with different temperatures. Infrared thermography is an accurate tool for identifying heat sites, but temperature cannot be used to predict the chemical composition or the incidence of mycotoxins that have been analyzed, within the silage. The pre-harvest phase of the ensiling process is most likely the main source of mycotoxins in silage.

  8. A Study on Chemical Compositions and Fiber Characteristics of Two Sympodial Bamboos

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The chemical composition and fiber characteristics of two sympodial bamboos have been studied in this paper. Based on analysis results, it is shown that the Whangee (D. Membranaceus Munro) bamboo is better than Yunnanicus bamboo(D. yunnaicus Hsueh et D. Z. Li) in utilization because of its higher specific gravity, better fiber length and its distribution rule and higher wall/lumen ratio, and that the Whangee bamboo is more suitable for papermaking and panel processing used in house construction. In addi...

  9. Chemical composition, antimicrobial, antioxidant and cytotoxic activity of Rosa centifolia L. essential oil

    OpenAIRE

    Nikolić, Miloš; Isabel C. F. R. Ferreira; Calhelha, Ricardo C.; Ângela FERNANDES; Marković, Dejan; Marković, Tatjana; Ćirić, Ana; Glamočlija, Jasmina; Soković, Marina

    2013-01-01

    The genus Rosa comprises more than 200 species appreciated for their use in perfume and cosmetic industry. The aim of this study was to investigate chemical composition, antimicrobial, antioxidant and cytotoxic activities of Rosa centifolia L. essential oil, in an attempt to contribute to the use of this plant as alternative product for microbial control and cancer therapy. The results of GC/MS analysis showed the presence of 12 components. The major constituents were: phenyl ethyl alcohol (5...

  10. Chemical Composition and Antioxidant Activity of Euterpe oleracea Roots and Leaflets

    OpenAIRE

    2016-01-01

    Euterpe oleracea (açaí) is a palm tree well known for the high antioxidant activity of its berries used as dietary supplements. Little is known about the biological activity and the composition of its vegetative organs. The objective of this study was to investigate the antioxidant activity of root and leaflet extracts of Euterpe oleracea (E. oleracea) and characterize their phytochemicals. E. oleracea roots and leaflets extracts were screened in different chemical antioxidant assays (DPPH—2,...

  11. Effect of white striping on chemical composition and nutritional value of chicken breast meat

    OpenAIRE

    Massimiliano Petracci; Samer Mudalal; Elena Babini; Claudio Cavani

    2014-01-01

    White striping defect (appearance of white striations parallel to muscle fiber on surface of breast) is considered an emerging issue in chicken breast meat which is related to increasing growth rate of modern hybrid birds. This study was aimed at evaluating the effect of white striping on chemical composition and nutritional value of chicken breast meat. During three replications, a total of 108 Pectoralis major muscles representing three degrees of white striping (absence=normal; presence cl...

  12. Chemical Composition and Biological Activities of Fragrant Mexican Copal (Bursera spp.).

    Science.gov (United States)

    Gigliarelli, Giulia; Becerra, Judith X; Curini, Massimo; Marcotullio, Maria Carla

    2015-12-12

    Copal is the Spanish word used to describe aromatic resins from several genera of plants. Mexican copal derives from several Bursera spp., Protium copal, some Pinus spp. (e.g., P. pseudostrobus) and a few Fabaceae spp. It has been used for centuries as incense for religious ceremonies, as a food preservative, and as a treatment for several illnesses. The aim of this review is to analyze the chemical composition and biological activity of commercial Mexican Bursera copal.

  13. Progress of Chemical Composition and Pharmacological Effects of Meretrix meretrix Linnaeus

    Institute of Scientific and Technical Information of China (English)

    Du; Zhengcai; Hou; Xiaotao; Huang; Qing; Deng; Jiagang; Fanshi; Fangcao

    2014-01-01

    Meretrix meretrix Linnaeus is a traditional marine drug. There are more than two thousand years of history using clamshell as a component of medicine.After a review of relevant literature at home and abroad for nearly 20 years,the author summarized chemical composition and pharmacological effects of M. meretrix,in order to provide a scientific basis for further development and utilization of M. meretrix.

  14. Chemical Composition and Biological Activities of Fragrant Mexican Copal (Bursera spp.

    Directory of Open Access Journals (Sweden)

    Giulia Gigliarelli

    2015-12-01

    Full Text Available Copal is the Spanish word used to describe aromatic resins from several genera of plants. Mexican copal derives from several Bursera spp., Protium copal, some Pinus spp. (e.g., P. pseudostrobus and a few Fabaceae spp. It has been used for centuries as incense for religious ceremonies, as a food preservative, and as a treatment for several illnesses. The aim of this review is to analyze the chemical composition and biological activity of commercial Mexican Bursera copal.

  15. Biomass production, yield and chemical composition of peppermint essential oil using different organic fertilizer sources

    OpenAIRE

    Costa, Andressa Giovannini; Bertolucci,Suzan Kelly Vilela; Chagas,Jorge Henrique; Ferraz, Elza de Oliveira [UNESP; Pinto,José Eduardo Brasil Pereira

    2013-01-01

    Mentha x piperita L. is an aromatic and medicinal species belonging to the family Lamiaceae that is popularly known as peppermint. The aim of this study was to evaluate the effects of organic fertilizer sources on the biomass production, yield and chemical composition of peppermint (Mentha piperita L.) essential oil. The experiment was conducted using a completely randomized design (CRD) with a 2 x 5 factorial scheme, two sources of manure (cattle and poultry), five doses (0, 3, 6, 9 and 12 k...

  16. Chemical composition of Kiscellian silty sediment (sivica from the Trobni Dol area, Eastern Slovenia

    Directory of Open Access Journals (Sweden)

    Miha Mišič

    2003-06-01

    Full Text Available Kiscellian marine silt termed »sivica« is widely developed in Tertiary basins of Eastern Slovenia. Chemical composition is rather uniform and reflects the dominance of filosilicates (mainly illite/muscovite, chlorite and montmorillonite and carbonates. PAAS normalised REE and Y abundances are slightly depleted for La, Ce, Pr and Nd, very close to PAAS for Sm, Eu, Gd and Tb, and depleted for Y, Ho, Er, Tm, Yb and Lu.

  17. Chemical Composition and Antifungal Activity of Ocimum basilicum L. Essential Oil

    OpenAIRE

    Neveen Helmy Abou El-Soud; Mohamed Deabes; Lamia Abou El-Kassem; Mona Khalil

    2015-01-01

    BACKGROUND: The leaves of Ocimum basilicum L. (basil) are used in traditional cuisine as spices; its essential oil has found a wide application in perfumery, dental products as well as antifungal agents. AIM: To assess the chemical composition as well as the in vitro antifungal activity of O. basilicum L. essential oil against Aspergillus flavus fungal growth and aflatoxin B1 production. MATERIAL AND METHODS: The essential oil of O. basilicum was obtained by hydrodistillation and anal...

  18. Chemical composition and antimicrobial activity of the essential oils of Pistacia lentiscus var. chia.

    Science.gov (United States)

    Magiatis, P; Melliou, E; Skaltsounis, A L; Chinou, I B; Mitaku, S

    1999-12-01

    The chemical composition of the three essential oils obtained by steam distillation of the mastic gum, leaves and twigs of Pistacia lentiscus var. chia, was studied by GC/MS. Sixty nine constituents were identified from the oils. alpha-Pinene, myrcene, trans-caryophyllene and germacrene D were found to be the major components. The in vitro antimicrobial activity of the three essential oils and of the resin (total, acid and neutral fraction) against six bacteria and three fungi is reported.

  19. Phylogenetic or environmental control on the organo-chemical composition of Sphagnum mosses?

    Science.gov (United States)

    Limpens, Juul; Nilsson, Mats

    2014-05-01

    Decomposition of organic material is one of the key processes that determines the size of the soil-feedback to global warming, but it is also a process surrounded with one of the largest uncertainties, making understanding its mechanistic drivers of crucial importance. In organic soils decomposition is closely determined by the organo-chemical composition of the litter entering the soil. But what, in turn drives the organo-chemical composition? Is it an emergent feature of the environment the species producing the litter grow in, or is it an evolutionary trait that can be tracked through the species' phylogeny? We set out to answer this question for one of the most import peat-forming plants on earth: the genus Sphagnum. We sampled 18 Sphagnum species, about equally distributed over 6 sites spanning a wide range of environmental conditions: most species were collected at multiple sites. For all species we characterised the chemical composition, focussing on three functional chemistry groups: (i) mineral elements, (ii) carbohydrate polymers (iii) non-carbohydrate polymers (aromatic and aliphatic compounds) . For each group of compounds we used multivariate statistical techniques to derive the degree of variation explained by environment: (site, position within site) and phylogeny (sections within genus Sphagnum). We found that the variation in mineral element concentrations was mostly explained by environment, with the biggest differences in the concentrations of basic cat-ions calcium and magnesium. In contrast, the variation in carbohydrates was mostly explained by phylogeny, with clear associations between sections and monosaccharides. The monosaccharide rhamnose was associated with species from the Acutifolia section known for their poor degradability, whereas xylose and galactose were closely associated with degradable species from the Cuspidata section. The composition non-carbohydrate polymers took an intermediate position: both environment and phylogeny

  20. Chemical composition of the volatile oil from Zanthoxylum avicennae and antimicrobial activities and cytotoxicity

    Directory of Open Access Journals (Sweden)

    Yin Lin

    2014-01-01

    Full Text Available Background: Through literature retrieval, there has been no report on the research of the chemical components in Zanthoxylum avicennae (Lam. DC. This paper extracted and determined the chemical components of the volatile oil in Z. avicennae, and at the same time, measured and evaluated the bioactivity of the volatile oil in Z. avicennae. Materials and Methods: We extract the volatile oil in Z. avicennae by steam distillation method, determined the chemical composition of the volatile oil by GC-MS coupling technique, and adopt the peak area normalization method to measured the relative percentage of each chemical composition in the volatile oil. Meanwhile, we use the Lethal-to-prawn larva bioactivity experiment to screen the cytotoxicity activities of the volatile oil in Z. avicennae, and using the slanting test-tube experiment to determine and evaluate its antibacterial activities in vitro for the eight kinds of plant pathogenic fungi in the volatile oil of the Z. avicennae. Results: The results show that 68 kinds of compounds are determined from the volatile oil of Z. avicennae. The determined part takes up 97.89% of the total peak area. The main ingredients in the volatile oil of Z. avicennae are sesquiterpenoids and monoterpene. The test results show that the volatile oil in Z. avicennae has strong antibacterial activities and cytotoxicity, with the strongest antibacterial activity against the Rhizoctonia solani AG1-1A. Conclusion: This research results will provide reference data for understanding the chemical composition of the volatile oil in the aromatic plant of Z. avicennae and its bioactivity, and for its further development and application.

  1. GC-MS studies of the chemical composition of two inedible mushrooms of the genus Agaricus

    Directory of Open Access Journals (Sweden)

    Gjosheva Melania

    2007-12-01

    Full Text Available Abstract Background Mushrooms in the genus Agaricus have worldwide distribution and include the economically important species A. bisporus. Some Agaricus species are inedible, including A. placomyces and A. pseudopratensis, which are similar in appearance to certain edible species, yet are known to possess unpleasant odours and induce gastrointestinal problems if consumed. We have studied the chemical composition of these mushrooms using GC-MS. Results Our GC-MS studies on the volatile fractions and butanol extracts resulted in the identification of 44 and 34 compounds for A. placomyces and A. pseudopratensis, respectively, including fatty acids and their esters, amino acids, and sugar alcohols. The most abundant constituent in the volatiles and butanol were phenol and urea respectively. We also identified the presence of ergosterol and two Δ7-sterols. In addition, 5α,8α-Epidioxi-24(ξ-methylcholesta-6,22-diene-3β-ol was isolated for the first time from both mushrooms. Our study is therefore the first report on the chemical composition of these two species. Conclusion The results obtained contribute to the knowledge of the chemical composition of mushrooms belonging to the Agaricus genus, and provide some explanation for the reported mild toxicity of A. placomyces and A. pseudopratensis, a phenonomenon that can be explained by a high phenol content, similar to that found in other Xanthodermatei species.

  2. Beebread from Apis mellifera and Apis dorsata. Comparative Chemical Composition and Bioactivity

    Directory of Open Access Journals (Sweden)

    Otilia BOBIS

    2017-05-01

    Full Text Available Beebread is a valuable bee product, both for bee nutrition and for humans. The high nutritional and bioactive properties of beebread were evaluated by chemical composition analysis of beebread from Apis mellifera and Apis dorsata. Bee bread harvested from Romania and India, coming from Apis mellifera and Apis dorsata bees, were evaluated for their chemical composition. Analyses were made in APHIS Laboratory from USAMV Cluj, using validated methods for bee products. Lipids were determined by the Soxhlet extraction method, total protein content was determined by Kjehldahl method, sugar spectrum was determined by high performance liquid chromatography with refractive index detection (HPLC-IR. Water content of beebread samples were situated between 11.45 and 16.46%, total protein content between 16.84 and 19.19% and total lipids between 6.36 and 13.47%.  Beebread has high bioactive properties which can be expressed as antioxidant and/or antibacterial activity. Chemical composition and bioactive properties of beebread is influenced by floral origin of the pollen which the bees collect and place in combs for fermentation. Also the climatic conditions have an important role in developing different fermentation compounds, that may act as antioxidants or antibacterial agents.

  3. Chemical composition and antioxidant activity of a Lebanese plant Euphorbia macroclada schyzoceras

    Institute of Scientific and Technical Information of China (English)

    Hussein Farhan; Hassan Rammal; Akram Hijazi; Ahmad Daher; Mohamad Reda; Hussein Annan; Ali Chokr; Ali Bassal; Bassam Badran

    2013-01-01

    Objective:To determine the chemical composition, total phenolic and total flavonoid contents of the crude extracts from leaves and stems of a Lebanese plant Euphorbia macroclada schyzoceras (E. macroclada), and to evaluate their antioxidant potential using DPPH, H2O2, and chelating of ferrous ions tests. Methods:Quantification of the total phenolic and total flavonoid contents of the crude extracts from leaves and stems and the antioxidant activities were evaluated using spectrophotometric analyses. The chemical composition has been estimated using different techniques such as IR, LC/MS and NMR. Results:Ethanolic extract from leaves of E. macroclada was better than aqueous extract and showed higher content in total phenolic and total flavonoid than found in the stems. On the other hand, using DPPH and H2O2 tests, this extract from leaves showed higher antioxidant capacity than aqueous extract. However, using the chelating of ferrous ions test, the antioxidant activity of the aqueous extract of both stems and leaves was stronger than that of ethanolic once. The chemical composition of the whole plant showed the presence of some aromatic compounds and fatty acids. Conclusions:Both ethanolic and water extracts from both parts of this plant are effective and have good antioxidant power. So, this plant can be used in the prevention of a number of diseases related to oxidative stress.

  4. Chemical composition and lipoxygenase activity in soybeans (Glycine max L. Merr.) submitted to gamma irradiation

    Science.gov (United States)

    Barros, Érica Amanda de; Broetto, Fernando; Bressan, Dayanne F.; Sartori, Maria M. P.; Costa, Vladimir E.

    2014-05-01

    Soybeans are an important food due to their functional and nutritional characteristics. However, consumption by western populations is limited by the astringent taste of soybeans and their derivatives which results from the action of lipoxygenase, an enzyme activated during product processing. The aim of this study was to evaluate the effect of gamma irradiation on the chemical composition and specific activity of lipoxygenase in different soybean cultivars. Soybeans were stored in plastic bags and irradiated with doses of 2.5, 5 and 10 kGy. The chemical composition (moisture, protein, lipids, ashes, crude fiber, and carbohydrates) and lipoxygenase specific activity were determined for each sample. Gamma irradiation induced a small increase of protein and lipid content in some soybean cultivars, which did not exceed the highest content of 5% and 26%, respectively, when compared to control. Lipoxygenase specific activity decreased in the three cultivars with increasing gamma irradiation dose. In conclusion, the gamma irradiation doses used are suitable to inactivate part of lipoxygenase while not causing expressive changes in the chemical composition of the cultivars studied.

  5. Differential characteristics in the chemical composition of bananas from Tenerife (Canary Islands) and Ecuador.

    Science.gov (United States)

    Forster, Markus Paul; Rodríguez Rodríguez, Elena; Díaz Romero, Carlos

    2002-12-18

    The contents of moisture, protein, ash, ascorbic acid, glucose, fructose, total sugars, and total and insoluble fiber were determined in cultivars of bananas (Gran Enana and Pequeña Enana) harvested in Tenerife and in bananas (Gran Enana) from Ecuador. The chemical compositions in the bananas from Tenerife and from Ecuador were clearly different. The cultivar did not influence the chemical composition, except for insoluble fiber content. Variations of the chemical composition were observed in the bananas from Tenerife according to cultivation method (greenhouse and outdoors), farming style (conventional and organic), and region of production (north and south). A highly significant (r = 0.995) correlation between glucose and fructose was observed. Correlations of ash and protein contents tend to separate the banana samples according to origin. A higher content of protein, ash, and ascorbic acid was observed as the length of the banana decreased. Applying factor analysis, the bananas from Ecuador were well separated from the bananas produced in Tenerife. An almost total differentiation (91.7%) between bananas from Tenerife and bananas from Ecuador was obtained by selecting protein, ash, and ascorbic acid content and applying stepwise discriminant analysis. By selecting the bananas Pequeña Enana and using discriminant analysis, a clear separation of the samples according to the region of production and farming style was observed.

  6. Application of infrared spectroscopy for assessing quality (chemical composition) of peatland plants, litter and soil

    Science.gov (United States)

    Straková, Petra; Laiho, Raija

    2016-04-01

    In this presentation, we assess the merits of using Fourier transform infrared (FTIR) spectra to estimate the organic matter composition in different plant biomass and peat soil samples. Infrared spectroscopy has a great potential in large-scale peatland studies that require low cost and high throughput techniques, as it gives a unique "chemical overview" of a sample, with all the chemical compounds present contributing to the spectrum produced. Our extensive sample sets include soil samples ranging from boreal to tropical peatlands, including sites under different environmental and/or land-use changes; above- and below-ground biomass of different peatland plant species; plant root mixtures. We mainly use FTIR to estimate (1) chemical composition of the samples (e.g., total C and N, C:N ratio, holocellulose, lignin and ash content), (2) proportion of each plant species in root mixtures, and (3) respiration of surface peat. The satisfactory results of our predictive models suggest that this experimental approach can, for example, be used as a screening tool in the evaluation of organic matter composition in peatlands during monitoring of their degradation and/or restoration success.

  7. Composition and Physico-Chemical Properties of Meat from Capons Fed Cereals

    Institute of Scientific and Technical Information of China (English)

    Olga Díaz; Luisana Rodríguez; Alexandr Torres; Ángel Cobos

    2013-01-01

    Chemical composition, physico-chemical properties and fatty acid composition of breast and drumstick meat from capons (castrated male cockerels) fed cereals were studied. Three groups of capons were reared. One group was fed ad libitum the same commercial diet until the 4th mon of life. The last month of its life, the capons of this group were fed corn. The second and third group of capons were fed the same diet from caponization. The second group was fed mixture of corn (50%) and wheat (50%). The third group of capons was fed 2/3 corn and 1/3 mixture of corn (50%) and barley (50%). Capons were reared under free-range conditions and slaughtered at 150 d of age. Caponization was performed at 48 d. No signiifcant effects of feeding in chemical composition, pH, water holding capacity, drip and cooking losses and texture of the meat were observed. The meat of the third group (capons fed 83%corn) was more yellow and showed higher content of C18:2 than that of the other capons.

  8. The Relationship Between the Solidification Parameters and Chemical Composition of Nickel Superalloy IN-713C

    Directory of Open Access Journals (Sweden)

    Binczyk F.

    2014-12-01

    Full Text Available The paper presents the results of studies on the development of correlation of solidification parameters and chemical composition of nickel superalloy IN-713C, which is used i.a. on aircraft engine turbine blades. Previous test results indicate significant differences in solidification parameters of the alloy, especially the temperatures Tliq and Tsol for each batch of ingots supplied by the manufacturer. Knowledge of such a relationship has important practical significance, because of the ability to asses and correct the temperatures of casting and heat treatment of casts on the basis of chemical composition. Using the statistical analysis it was found that the temperature of the solidification beginning Tliq is mostly influenced by the addition of carbon (similar to iron alloys. The additions of Al and Nb have smaller but still significant impact. Other alloying components do not have significant effect on Tliq. The temperature Teut is mostly affected by Ni, Ti and Nb. The temperature Tsol is not in any direct correlation with the chemical composition, which is consistent with previous research. The temperature Tsol depends primarily on the presence of non-metallic inclusions present in feed materials and introduced during the melting and casting processes.

  9. Chemical composition of crystalline rock fragments from Luna 16 and Luna 20 fines

    Science.gov (United States)

    Cimbalnikova, A.; Palivcova, M.; Frana, J.; Mastalka, A.

    1977-01-01

    The chemical composition (bulk, rare earth, and trace elements) of the Luna 16 mare regolith and luna 20 highland regolith is discussed. The rock samples considered are 14 basaltic rock fragments (Luna 16) and 13 rock fragments of the ANT suite (Luna 20). On the basis of bulk composition, two types of basaltic rocks have been differentiated and defined in the Luna 16 regolith: mare basalts (fundamental crystalline rocks of Mare Fecunditatis) and high-alumina basalts. The bulk analyses of rock fragments of the ANT suite also enabled distinction of two rock types: anorthositic norites and troctolites and/or spinal-troctolites (the most abundant crystalline rocks of the highland region, the landing site of luna 20), and anorthosites. The chemical compositions of Luna 16 and Luna 20 regolith samples are compared. Differences in the chemistry of the Luna 16 mare regolith and that of mare basalts are discussed. The chemical affinity between the Luna 20 highland regolith and (a) anorthositic norites and (b) troctolites and/or spinel-troctolites has been ascertained.

  10. Electrical performance and chemical composition studies on original and falsified Ni-MH batteries

    Directory of Open Access Journals (Sweden)

    Alexandre Urbano

    2010-12-01

    Full Text Available We show in this paper that falsifications on technological products have hit even rechargeable nickel metal hydride batteries (Ni-MH. The electrical performance and the electrode chemical composition were investigated for authentic and falsified AAA Ni-MH batteries, purchased in the Londrina market, Paraná State. Battery charge capacities were measured at 0,2 C discharge rate and average electrical power was measured at 0.2 and 0.8 C discharge rate. To perform chemical composition analysis, the batteries were vacuum dismantled and their electrodes were characterized by Energy Dispersive X-Ray Fluorescence (EDXRF and X-Ray Diffraction (XRD techniques. It was observed that the charge capacities for the authentic and falsified batteries were 920 and 154 mAh, respectively. The average electrical powers were 210 mW for authentic and 41 mW for falsified batteries. The cathode chemical composition was nickel hydroxide, (Ni(OH2, for both kinds of batteries. However, the anodes of these batteries were not composed by the same materials. The alloy LaNi5 was identified as the electroactive compound in the anode of the authentic battery, while cadmium hydroxide compound, (Cd (OH2, was identified in the falsified battery anode. The authentic battery therefore presented six times more charge capacity, five times more power at 0.2 C discharge rate and 6 times at 0.8 C than the falsified battery, and are yet less dangerous to environment due cadmium absence.

  11. New propolis type from north-east Brazil: chemical composition, antioxidant activity and botanical origin.

    Science.gov (United States)

    Ferreira, Joselena M; Fernandes-Silva, Caroline C; Salatino, Antonio; Negri, Giuseppina; Message, Dejair

    2017-08-01

    Propolis is a bee product with wide diversity of biological activity. It has a complex composition, which is dependent on its botanical source. The present study aimed to determine the chemical profile, antioxidant activity and botanical origin of two samples of a propolis type from two locations of the state of Rio Grande do Norte (RN, north-east Brazil). The standard chemical characteristics of the RN propolis are similar or superior to the internationally marketed Brazilian green propolis. RN propolis from two locations have high antioxidant activity, corresponding to 10% (municipality of Afonso Bezerra) and 13% (municipality of Alto do Rodrigues) of quercetin activity by the 2,2-diphenyl-1-picrylhydrazyl method and to 15% (both locations) by the β-carotene discoloration method. High-performance liquid chromatography with diode array detection (HPLC-DAD)-electrospray ionization-tandem mass spectrometry analyses revealed that most constituents of the RN propolis are flavonoids, mainly flavonols and chalcones. HPLC-DAD analysis of ethanol extracts revealed a great similarity between the chemical profile of RN propolis and shoot apices of 'jurema-preta' (Mimosa tenuiflora, Leguminosae, Mimosoideae). 'Jurema-preta' shoot apices are likely resin sources of RN propolis. The chemical characteristics and antioxidant property of RN propolis provide promising prospects for the introduction of this type of propolis into the apicultural market. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  12. Response of the global climate to changes in atmospheric chemical composition due to fossil fuel burning

    Science.gov (United States)

    Hameed, S.; Cess, R. D.; Hogan, J. S.

    1980-01-01

    Recent modeling of atmospheric chemical processes (Logan et al, 1978; Hameed et al, 1979) suggests that tropospheric ozone and methane might significantly increase in the future as the result of increasing anthropogenic emissions of CO, NO(x), and CH4 due to fossil fuel burning. Since O3 and CH4 are both greenhouse gases, increases in their concentrations could augment global warming due to larger future amounts of atmospheric CO2. To test the possible climatic impact of changes in tropospheric chemical composition, a zonal energy-balance climate model has been combined with a vertically averaged tropospheric chemical model. The latter model includes all relevant chemical reactions which affect species derived from H2O, O2, CH4, and NO(x). The climate model correspondingly incorporates changes in the infrared heating of the surface-troposphere system resulting from chemically induced changes in tropospheric ozone and methane. This coupled climate-chemical model indicates that global climate is sensitive to changes in emissions of CO, NO(x) and CH4, and that future increases in these emissions could augment global warming due to increasing atmospheric CO2.

  13. Response of the global climate to changes in atmospheric chemical composition due to fossil fuel burning

    Science.gov (United States)

    Hameed, S.; Cess, R. D.; Hogan, J. S.

    1980-01-01

    Recent modeling of atmospheric chemical processes (Logan et al, 1978; Hameed et al, 1979) suggests that tropospheric ozone and methane might significantly increase in the future as the result of increasing anthropogenic emissions of CO, NO(x), and CH4 due to fossil fuel burning. Since O3 and CH4 are both greenhouse gases, increases in their concentrations could augment global warming due to larger future amounts of atmospheric CO2. To test the possible climatic impact of changes in tropospheric chemical composition, a zonal energy-balance climate model has been combined with a vertically averaged tropospheric chemical model. The latter model includes all relevant chemical reactions which affect species derived from H2O, O2, CH4, and NO(x). The climate model correspondingly incorporates changes in the infrared heating of the surface-troposphere system resulting from chemically induced changes in tropospheric ozone and methane. This coupled climate-chemical model indicates that global climate is sensitive to changes in emissions of CO, NO(x) and CH4, and that future increases in these emissions could augment global warming due to increasing atmospheric CO2.

  14. Marketing research in positioning and launching of yoghurt with a balanced chemical composition

    Directory of Open Access Journals (Sweden)

    M. Mardar

    2016-12-01

    Full Text Available Annotation. This article presents the analysis of marketing environment of the enterprises that produce yogurt products in Ukraine. In order to carry out a deeper analysis of the marketing environment of the new yoghurt drinks with a balanced composition of the major nutrients in food and increased probiotic properties, PEST and SWOT-analyses were conducted, they identified environmental factors that have favorable and adverse effects as well as internal strengths and weaknesses of the new product. Based on the results of marketing research of consumer preferences, the core audience of new yoghurt drink with a balanced chemical composition and the elevated concentration of Bifidobacteria were defined. The received results led to justification of the expediency of elaboration of new yoghurt drinks with probiotic properties and balanced composition of basic food nutrients as well as to formulation of a strategy of new product promotion on the consumer market of Ukraine.

  15. Influence of Stellar Flares on the Chemical Composition of Exoplanets and Spectra

    CERN Document Server

    Venot, Olivia; Carl, Shaun; Hashim, Aysha; Decin, Leen

    2016-01-01

    More than 3000 exoplanets have been detected so far, and more and more spectroscopic observations of exoplanets are performed. Future instruments are eagerly awaited as they will be able to provide spectroscopic data with a greater accuracy and sensitivity than what is currently available. An important aspect to consider is temporal stellar atmospheric disturbances that can influence the planetary composition, and hence spectra, and potentially can lead to incorrect assumptions about the steady-state atmospheric composition of the planet. We focus on perturbations that come from the host star in the form of flare events that significantly increase the photon flux impingement on the exoplanet atmosphere. In some cases, and particularly for M stars, this sudden increase may last for several hours. We aim at answering the question to what extent a stellar flare is able to modify the chemical composition of the planetary atmosphere and, therefore influence the resulting spectra. We use a 1D thermo-photochemical m...

  16. The Chemical Nature of the Fiber/resin Interface in Composite Materials

    Science.gov (United States)

    Diefendorf, R. J.

    1984-01-01

    Carbon fiber/epoxy resin composites are considered. The nature of the fiber structure and the interaction that occurs at the interface between fiber and matrix are emphasized. Composite toughness can be improved by increased axial tensile and compressive strengths in the fibers. The structure of carbon fibers indicates that the fiber itself can fail transversely, and different transverse microstructures could provide better transverse strengths. The higher surface roughness of lower modulus and surface-treated carbon fibers provides better mechanical interlocking between the fiber and matrix. The chemical nature of the fiber surface was determined, and adsorption of species on this surface can be used to promote wetting and adhesion. Finally, the magnitude of the interfacial bond strength should be controlled such that a range of composites can be made with properties varying from relatively brittle and high interlaminar shear strength to tougher but lower interlaminar shear strength.

  17. The chemical composition of the Sun from helioseismic and solar neutrino data

    CERN Document Server

    Villante, F L; Delahaye, F; Pinsonneault, M H

    2013-01-01

    We perform a quantitative analysis of the solar composition problem by using a statistical approach that allows us to combine the information provided by helioseimic and solar neutrino data in an effective way. We include in our analysis the helioseismic determinations of the surface helium abundance and of the depth of the convective envelope, the measurements of the $^7{\\rm Be}$ and $^8{\\rm B}$ neutrino fluxes, the sound speed profile inferred from helioseismic frequencies. We provide all the ingredients to describe how these quantities depend on the solar surface composition and to evaluate the (correlated) uncertainties in solar model predictions. We include errors sources that are not traditionally considered such as those from inversion of helioseismic data. We, then, apply the proposed approach to infer the chemical composition of the Sun. We show that the opacity profile of the Sun is well constrained by the solar observational properties. In the context of a two parameter analysis in which elements a...

  18. Chemical composition of the essential oil from Croton kimosorum, an endemic species to Madagascar.

    Science.gov (United States)

    Rabehaja, Delphin J R; Ihandriharison, Harilala; Ramanoelina, Panja A R; Benja, Rakotonirina; Ratsimamanga-Urverg, Suzanne; Bighelli, Ange; Casanova, Joseph; Tomi, Félix

    2014-01-01

    Croton kimosorum Leandri is an endemic species to Madagascar. The chemical composition of aerial parts, leaf and stem oils is reported for the first time. Analysis was carried out by combination of chromatographic (CC, GC), spectroscopic and spectrometric (MS, 13C NMR) techniques. In total, 76 compounds have been identified. Essential oil isolated from aerial parts contained mainly linalool (21.6%), sabinene (10.4%), 1,8-cineole (6.3%), beta-pinene (6.2%), (E)-beta-caryophyllene (5.9%), terpinen-4-ol (4.8%), geraniol (4,5%) and germacrene D (2.3%). In comparison with the first sample, the composition of leaf and stem oils varied slightly, while essential oil isolated by vapor distillation from a semi-industrial still exhibited similar composition.

  19. Morphology and properties of segregated-network chemically converted graphene-poly(vinyl chloride) composite.

    Science.gov (United States)

    Pham, Viet Hung; Dang, Thanh Truong; Hur, Seung Hyun; Kim, Eui Jung; Chung, Jin Suk

    2012-07-01

    The poly(vinyl chloride)-chemically converted graphene (PVC-CCG) composite prepared using colloidal blending, filtration and drying, and followed by compression molding at 175 degrees C, exhibited an electrical percolation threshold as low as 0.4 wt% and an electrical conductivity as high as 46.5 S/m corresponding to 4.0 wt% of CCG. The high electrical conductivity of the PVC-CCG composite was the result of minimizing the amount of surfactant using various methods. For example, the PVC latex was prepared using miniemulsion polymerization, and the CCG was synthesized via hydrazine reduction of graphene oxide at ambient temperature in order to diminish the irreversible agglomeration of CCG sheets during reduction. The morphology of the PVC-CCG composite, characterized using scanning electron microscopy in charge contrast mode, revealed that the CCG sheets created a segregated network in the PVC matrix.

  20. Facile Synthesis of Mono-Dispersed Polystyrene (PS/Ag Composite Microspheres via Modified Chemical Reduction

    Directory of Open Access Journals (Sweden)

    Wen Zhu

    2013-12-01

    Full Text Available A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using poly-vinylpyrrolidone (PVP as a dispersant at first. Then, poly-dopamine (PDA was fabricated to functionally modify the surfaces of PS microspheres. With the addition of [Ag(NH32]+ to the PS dispersion, [Ag(NH32]+ complex ions were absorbed and reduced to silver nanoparticles on the surfaces of PS-PDA microspheres to form PS/Ag composite microspheres. PVP acted both as a solvent of the metallic precursor and as a reducing agent. PDA also acted both as a chemical protocol to immobilize the silver nanoparticles at the PS surface and as a reducing agent. Therefore, no additional reducing agents were needed. The resulting composite microspheres were characterized by TEM, field emission scanning electron microscopy (FESEM, energy-dispersive X-ray spectroscopy (EDS, XRD, UV-Vis and surface-enhanced Raman spectroscopy (SERS. The results showed that Ag nanoparticles (NPs were homogeneously immobilized onto the PS microspheres’ surface in the presence of PDA and PVP. PS/Ag composite microspheres were well formed with a uniform and compact shell layer and were adjustable in terms of their optical property.

  1. CHEMICAL COMPOSITION AND SOMATIC CELL EVOLUTION DURING LACTATION IN ROMANIAN BLACK AND WHITE COWS

    Directory of Open Access Journals (Sweden)

    L.T. CZISZTER

    2013-12-01

    Full Text Available The aim of the paper was to study the evolution of the chemical composition and somatic cell count during lactation in Romanian Black and White cows and effect of calving season on the shape of the lactation curve. Lactations form 125 multiparous cows were studied. Milk yield and sampling were carried out using the official performance control method A4. Milk was analyzed for composition in infrared spectrometry and for SCC using a viscosimeter. Results were modeled using Wood’s incomplete gamma function y=abxe(-cx, and season effect was assessed using ANOVA/MANOVA. A discussion was carried out regarding the shape of the lactation curves for milk yield, each milk component and SCC. The calving season had a significant effect (p<0.005 on the shape of the lactation curve for milk yield, milk chemical composition and milk somatic cell count. Summer calving cows had flatter lactation curves for milk yield and composition compared to winter calving cows. For somatic cell count spring calving cows had the flattest lactation curve while autumn calving cows has the steepest lactation curve.

  2. Crystal Structure and Chemical Composition of a Presolar Silicate from the Queen Elizabeth Range 99177 Meteorite

    Science.gov (United States)

    Nguyen, A. N.; Keller, L. P.; Rahman, Z.; Messenger, S.

    2013-01-01

    Mineral characterization of presolar silicate grains, the most abundant stardust phase, has provided valuable information about the formation conditions in circumstellar environments and in super-nova (SN) outflows. Spectroscopic observations of dust around evolved stars suggest a majority of amor-phous, Mg-rich olivine grains, but crystalline silicates, most of which are pyroxene, have also been observed [1]. The chemical compositions of hundreds of presolar silicates have been determined by Auger spectroscopy and reveal high Fe contents and nonstoichiometric compositions intermediate to olivine and pyroxene [2-6]. The unexpectedly high Fe contents can partly be attributed to secondary alteration on the meteorite parent bodies, as some grains have Fe isotopic anomalies from their parent stellar source [7]. Only about 35 presolar silicates have been studied for their mineral structures and chemical compositions by transmission electron microscopy (TEM). These grains display a wide range of compositions and structures, including crystalline forsterite, crystalline pyroxene, nanocrystalline grains, and a majority of amorphous nonstoichiometric grains. Most of these grains were identified in the primitive Acfer 094 meteorite. Presolar silicates from this meteorite show a wide range of Fe-contents, suggestive of secondary processing on the meteorite parent body. The CR chondrite QUE 99177 has not suffered as much alteration [8] and displays the highest presolar silicate abundance to date among carbonaceous chondrites [3, 6]. However, no mineralogical studies of presolar silicates from this meteorite have been performed. Here we examine the mineralogy of a presolar silicate from QUE 99177.

  3. Elemental composition method for computation and analysis of simultaneous chemical and phase equilibrium

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    An elemental composition method for computation and analysis of simultaneous chemical and phase equilibrium (CPE) of non-ideal mixtures is proposed. The concept of element is defined, the relationship between component composition and elemental composition is derived, and the concept of elemental potential and its physical meaning are further cleared from the view point of thermodynamics. The relationship between chemical potential and elemental potential is derived in the thermodynamic principles, and the computation equations for CPE problem are obtained based on elemental potential. A simple form of necessary and sufficient condition in terms of elemental composition for reactive azeotropes is derived, which takes the same functional form as the condition for azeotropes in non-reactive systems. The element in this note may be atoms, molecules or group radicals. The presented method is applicable to CPE problem of non-ideal mixtures, and the computation can be simplified by the dimension reducing method. The presented method was supplied to compute and analyze CPE problem of several examples and it is found that it is a robust and efficient method.

  4. Dittrichia graveolens (L.) Greuter Essential Oil: Chemical Composition, Multivariate Analysis, and Antimicrobial Activity.

    Science.gov (United States)

    Mitic, Violeta; Stankov Jovanovic, Vesna; Ilic, Marija; Jovanovic, Olga; Djordjevic, Aleksandra; Stojanovic, Gordana

    2016-01-01

    The chemical composition and in vitro antimicrobial activities of Dittrichia graveolens (L.) Greuter essential oil was studied. Moreover, using agglomerative hierarchical cluster (AHC) and principal component analyses (PCA), the interrelationships of the D. graveolens essential-oil profiles characterized so far (including the sample from this study) were investigated. To evaluate the chemical composition of the essential oil, GC-FID and GC/MS analyses were performed. Altogether, 54 compounds were identified, accounting for 92.9% of the total oil composition. The D. graveolens oil belongs to the monoterpenoid chemotype, with monoterpenoids comprising 87.4% of the totally identified compounds. The major components were borneol (43.6%) and bornyl acetate (38.3%). Multivariate analysis showed that the compounds borneol and bornyl acetate exerted the greatest influence on the spatial differences in the composition of the reported oils. The antimicrobial activity against five bacterial and one fungal strain was determined using a disk-diffusion assay. The studied essential oil was active only against Gram-positive bacteria.

  5. Analysis of Chemical Composition of Portland Cement in Ghana: A Key to Understand the Behavior of Cement

    Directory of Open Access Journals (Sweden)

    Mark Bediako

    2015-01-01

    Full Text Available The performance of Portland cement in concrete or mortar formation is very well influenced by chemical compositions among other factors. Many engineers usually have little information on the chemical compositions of cement in making decisions for the choice of commercially available Portland cement in Ghana. This work analyzed five different brands of Portland cement in Ghana, namely, Ghacem ordinary Portland cement (OPC and Portland limestone cement (PLC, CSIR-BRRI Pozzomix, Dangote OPC, and Diamond PLC. The chemical compositions were analyzed with X-Ray Fluorescence (XRF spectrometer. Student’s t-test was used to test the significance of the variation in chemical composition between standard literature values and each of the commercial cement brands. Analysis of variance (ANOVA was also used to establish the extent of variations between chemical compositions and brand name of the all commercial Portland cement brands. Student’s t-test results showed that there were no significant differences between standard chemical composition values and that of commercial Portland cement. The ANOVA results also indicated that each brand of commercial Portland cement varies in terms of chemical composition; however, the specific brands of cement had no significant differences. The study recommended that using any brand of cement in Ghana was good for any construction works be it concrete or mortar formation.

  6. Gamma irradiation effect on the chemical composition and the antioxidant activity of Ipomoea batatas L

    Energy Technology Data Exchange (ETDEWEB)

    Tahir, D., E-mail: dtahir@fmipa.unhas.ac.id; Halide, H., E-mail: dtahir@fmipa.unhas.ac.id; Kurniawan, D. [Department of Physics, Hasanuddin University, Makassar 90245 (Indonesia); Wahab, A. W. [Department of Chemistry, Hasanuddin University, Makassar 90245 (Indonesia)

    2014-09-25

    The chemical composition and antioxidant activity of Ipomoea batatas L. (sweet potato) were studied by x-ray fluorescence (XRF) spectroscopy, Fourier transform infrared spectroscopy, and by the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging capacity. The irradiation treatment was performed by using Cs-137 as a gamma sources in experimental equipment. Treatment by irradiation emerges as a possible conservation technique that has been tested successfully in several food products. The amount of chemical composition was changed and resulting new chemical for absorbed dose 40 mSv. Interestingly, it was found that gamma irradiation significantly increased the antioxidant activity, as measured by DPPH radical scavenging capacity. The antioxidant activity of Ipomoea batatas L. extract was dramatically increased in the non-irradiated sample to the sample irradiated at 40 mSv. These results indicate that gamma irradiation of Ipomoea batatas L. extract can enhance its antioxidant activity through the formation of a new chemical compound. Based on these results, increased antioxidant activity of Ipomoea batatas L. extracts by gamma rays can be applied to various industries, especially cosmetics, foodstuffs, and pharmaceuticals.

  7. Gamma irradiation effect on the chemical composition and the antioxidant activity of Ipomoea batatas L.

    Science.gov (United States)

    Tahir, D.; Halide, H.; Wahab, A. W.; Kurniawan, D.

    2014-09-01

    The chemical composition and antioxidant activity of Ipomoea batatas L. (sweet potato) were studied by x-ray fluorescence (XRF) spectroscopy, Fourier transform infrared spectroscopy, and by the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging capacity. The irradiation treatment was performed by using Cs-137 as a gamma sources in experimental equipment. Treatment by irradiation emerges as a possible conservation technique that has been tested successfully in several food products. The amount of chemical composition was changed and resulting new chemical for absorbed dose 40 mSv. Interestingly, it was found that gamma irradiation significantly increased the antioxidant activity, as measured by DPPH radical scavenging capacity. The antioxidant activity of Ipomoea batatas L. extract was dramatically increased in the non-irradiated sample to the sample irradiated at 40 mSv. These results indicate that gamma irradiation of Ipomoea batatas L. extract can enhance its antioxidant activity through the formation of a new chemical compound. Based on these results, increased antioxidant activity of Ipomoea batatas L. extracts by gamma rays can be applied to various industries, especially cosmetics, foodstuffs, and pharmaceuticals.

  8. KNOWLEDGE OF THE SOIL CHEMICAL COMPOSITION IN AREAS OF ECOLOGICAL SUCCESSION FOREST FIR (Abies guatemalensis REHDER

    Directory of Open Access Journals (Sweden)

    José Vicente Martínez-Arévalo

    2014-01-01

    Full Text Available The Chemical composition ( pH , elements major and minor , % S.B., CIC , % M.O. and N.T on soils in open areas and forest fir (Abies guatemalensis Rehder in a successional gradient was studied. These results were related to vegetation through correlation analysis and Canonical Correspondence analysis. The aim was to show the relationships present between vegetation and soil chemistry through ecological succession in areas of cold climate. The results indicate that the vegetation is composed of 82 species of which 20 are the lower herbaceous layer, 34 the herbaceous layer of the upper, 21 shrubs and seven trees. The chemical characteristics of the soil through five successional stages have only few significant differences and not show a clear tendency to increase according to the degree of ecosystem development. A low percentage of correlations between vegetation and soil chemical characteristics are presented. The correspondence canonical analysis shows that the features that correlate with sites through vegetation are the K, and % S.B. and CIC. One can conclude that the approach of the study of the chemical composition of soils in areas of ecological sequence is complex, especially in high regions where, besides other factors, the temperature and humidity play an important role on the soil-vegetation dynamic.

  9. GC-MS investigation of the chemical composition of honeybee drone and queen larvae homogenate

    Directory of Open Access Journals (Sweden)

    Isidorov Valery A.

    2016-06-01

    Full Text Available Honeybee larva homogenate appears to be underrated and insufficiently explored but this homogenate is an exceptionally valuable honeybee product. Drone larva homogenate is very nutritional due to its high content of proteins, free amino acids, lipids, and carbohydrates. Moreover, the biological characteristics of honeybee larvae indicate the presence of chemical substances that may be pharmacologically active. In spite of the above, the chemical composition of honeybee larva has not gained as much attention as that of other bee products. In this study, the chemical composition of honeybee brood homogenate has been investigated using gas chromatography/mass spectrometry. As a result, it was possible to isolate as many as 115 extractive organic compounds from 6 samples of crude queen and 9 samples of drone homogenate. The main groups of substances extracted from either type of homogenate were composed of free amino acids and carbohydrates. The relative content of amino acids in queen homogenate as well as the share of essential amino acids were found to be higher than in the drone homogenate. Disaccharide trehalose was the dominant sugar in the queen larvae, whilst glucose prevailed in the drone larvae. Comparative chemical analyses of honeybee queen and drone larva homogenates have allowed us to make a preliminary inference about a higher overall value of the former.

  10. Effect of teapot materials on the chemical composition of oolong tea infusions.

    Science.gov (United States)

    Liao, Zih-Hui; Chen, Ying-Jie; Tzen, Jason Tze-Cheng; Kuo, Ping-Chung; Lee, Maw-Rong; Mai, Fu-Der; Rairat, Tirawat; Chou, Chi-Chung

    2017-07-04

    The flavor and quality of tea are widely believed to be associated with the pot in which the tea is made. However, this claim is mostly by experiences and lacks solid support from scientific evidence. The current study investigated and compared the chemical compositions of oolong tea made with six different teapot materials, namely Zisha, Zhuni, stainless steel, ceramic, glass and plastic. For each tea sample, polyphenols and caffeine were examined by HPLC-UV, volatile compounds by GC/MS, amino acids by LC/MS and minerals by ICP-MS. The results suggested that tea infusions from Zisha and Zhuni pots contain higher levels of EGC, EGCG and total catechins and less caffeine than those from ceramic, glass and plastic pots and tend to have the lowest total mineral contents, potassium and volatile compounds in tea soup. The statistical differences were not all significant among Zisha, Zhuni and stainless steel pots. Based on the overall chemical composition of the tea infusion, Yixing clay pots (Zisha and Zhuni) produce tea infusions that are presumably less bitter and more fragrant and tend to contain more healthful compounds than tea infusions from other pots. The results could partially explain why Yixing clay pots are among the most popular teapots. The beneficial effects of long-term repeated use of these teapots warrants further study. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  11. The chemical composition and band gap of amorphous Si:C:N:H layers

    Energy Technology Data Exchange (ETDEWEB)

    Swatowska, Barbara, E-mail: swatow@agh.edu.pl [AGH University of Science and Technology, Department of Electronics, Mickiewicza Av. 30, 30-059 Krakow (Poland); Kluska, Stanislawa; Jurzecka-Szymacha, Maria [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Mickiewicza Av. 30, 30-059 Krakow (Poland); Stapinski, Tomasz [AGH University of Science and Technology, Department of Electronics, Mickiewicza Av. 30, 30-059 Krakow (Poland); Tkacz-Smiech, Katarzyna [AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Mickiewicza Av. 30, 30-059 Krakow (Poland)

    2016-05-15

    Highlights: • Six type of amorphous hydrogenated films were obtained and analysed. • Investigated chemical bondings strongly influenced energy gap values. • Analysed layers could be applied as semiconductors and also as dielectrics. - Abstract: In this work we presented the correlation between the chemical composition of amorphous Si:C:N:H layers of various content of silicon, carbon and nitrogen, and their band gap. The series of amorphous Si:C:N:H layers were obtained by plasma assisted chemical vapour deposition method in which plasma was generated by RF (13.56 MHz, 300 W) and MW (2.45 GHz, 2 kW) onto monocrystalline silicon Si(001) and borosilicate glass. Structural studies were based on FTIR transmission spectrum registered within wavenumbers 400–4000 cm{sup −1}. The presence of Si−C, Si−N, C−N, C=N, C=C, C≡N, Si−H and C−H bonds was shown. The values band gap of the layers have been determined from spectrophotometric and ellipsometric measurements. The respective values are contained in the range between 1.64 eV – characteristic for typical semiconductor and 4.21 eV – for good dielectric, depending on the chemical composition and atomic structure of the layers.

  12. Laboratory analogues simulating Titan's atmospheric aerosols: Compared chemical compositions of grains and thin films

    Science.gov (United States)

    Carrasco, Nathalie; Jomard, François; Vigneron, Jackie; Etcheberry, Arnaud; Cernogora, Guy

    2016-09-01

    Two sorts of solid organic samples can be produced in laboratory experiments simulating Titan's atmospheric reactivity: grains in the volume and thin films on the reactor walls. We expect that grains are more representative of Titan's atmospheric aerosols, but films are used to provide optical indices for radiative models of Titan's atmosphere. The aim of the present study is to address if these two sorts of analogues are chemically equivalent or not, when produced in the same N2-CH4 plasma discharge. The chemical compositions of both these materials are measured by using elemental analysis, XPS analysis and Secondary Ion Mass Spectrometry. The main parameter probed is the CH4/N2 ratio to explore various possible chemical regimes. We find that films are homogeneous but significantly less rich in nitrogen and hydrogen than grains produced in the same experimental conditions. This surprising difference in their chemical compositions could be explained by the efficient etching occurring on the films, which stay in the discharge during the whole plasma duration, whereas the grains are ejected after a few minutes. The higher nitrogen content in the grains possibly involves a higher optical absorption than the one measured on the films, with a possible impact on Titan's radiative models.

  13. Estimation of aerosol water and chemical composition from AERONET at Cabauw, the Netherlands

    Directory of Open Access Journals (Sweden)

    A. J. van Beelen

    2013-06-01

    Full Text Available Remote sensing of aerosols provides important information on the atmospheric aerosol abundance. However, due to the hygroscopic nature of aerosol particles observed aerosol optical properties are influenced by atmospheric humidity, and the measurements do not unambiguously characterize the aerosol dry mass and composition which complicates the comparison with aerosol models. In this study we derive aerosol water and chemical composition by a modeling approach that combines individual measurements of remotely sensed aerosol properties (e.g. optical thickness, single scattering albedo, refractive index and size distribution from an AERONET (Aerosol Robotic Network sun-photometer with radiosonde measurements of relative humidity. The model simulates water uptake by aerosols based on the chemical composition and size distribution. A minimization method is used to calculate aerosol composition and concentration, which are then compared to in situ measurements from the Intensive Measurement Campaign At the Cabauw Tower (IMPACT, May 2008, the Netherlands. Computed concentrations show reasonable agreement with surface observations and follow the day-to-day variability in observations. Total dry mass (33 ± 12 μg m−3 and black carbon concentrations (0.7 ± 0.3 μg m−3 are generally accurately computed. The uncertainty in the AERONET (real refractive index (0.025–0.05 introduces larger uncertainty in the modeled aerosol composition (e.g. sulfates, ammonium nitrate or organic matter and leads to an uncertainty of 0.1–0.25 in aerosol water volume fraction. Water volume fraction is highly variable depending on composition, up to >0.5 at 70–80% and <0.1 at 40% relative humidity.

  14. Forming chemical composition of surface waters in the Arctic. Case study of Lake Inari and the River Paz

    Directory of Open Access Journals (Sweden)

    Mazukhina S. I.

    2017-03-01

    Full Text Available Questions of studying the formation of surface and ground waters, their interaction with rocks, development of the basics of their rational use and protection are of great fundamental and practical importance. The influence of the northern Fennoscandian (Baltic Shield rock composition on forming surface waters' chemical composition in the border area of Finland – Russia – Norway (Lake Inari, the River Paz using physical-chemical modeling (Selector software package has been evaluated. For the physical-chemical modeling there have been made two samples of chemical analyses of the most widespread rocks forming the catchment area, with their percentage ratio taken into consideration. Since the catchment area of the prevailing majority of streams feeding Lake Inari is composed of rocks of the Lapland granulite belt (LGB and its framing, it will be the main sample (conditional influence of their composition on the chemical composition of waters is about 80 %. The second sample includes gneisses, migmatites, granite-gneisses, granites and quartz diorites typical for Inari terrane (conventional influence of their composition on the chemical composition of waters is about 20 %. It has been found that the chemical composition of the surface waters is formed by interaction of precipitation with intrusive, metamorphic and sedimentary rocks of northern Fennoskandia containing Clarke concentrations of S, C, F, Zn, Ni, Pb, Cu. It has been shown that due to interactions in the water – rock system the chemical composition of Lake Inari waters as well as upper and middle flow of the River Paz is formed by weathering of granulites of the Lapland granulite belt and Inari terrane granitoids of the northern Fennoscandia. The chemical composition of waters in the River Paz downstream is formed by weathering of metamorphosed volcanic and sedimentary rocks of the Pechenga structure and the impact of industrial pollution

  15. Gross anatomy of network security

    Science.gov (United States)

    Siu, Thomas J.

    2002-01-01

    Information security involves many branches of effort, including information assurance, host level security, physical security, and network security. Computer network security methods and implementations are given a top-down description to permit a medically focused audience to anchor this information to their daily practice. The depth of detail of network functionality and security measures, like that of the study of human anatomy, can be highly involved. Presented at the level of major gross anatomical systems, this paper will focus on network backbone implementation and perimeter defenses, then diagnostic tools, and finally the user practices (the human element). Physical security measures, though significant, have been defined as beyond the scope of this presentation.

  16. A miniature laser ablation mass spectrometer for quantitative in situ chemical composition investigation of lunar surface

    Science.gov (United States)

    Brigitte Neuland, Maike; Grimaudo, Valentine; Mezger, Klaus; Moreno-García, Pavel; Riedo, Andreas; Tulej, Marek; Wurz, Peter

    2016-04-01

    The chemical composition of planetary bodies, moons, comets and asteroids is a key to understand their origin and evolution [Wurz,2009]. Measurements of the elemental and isotopic composition of rocks yield information about the formation of the planetary body, its evolution and following processes shaping the planetary surface. From the elemental composition, conclusions about modal mineralogy and petrology can be drawn. Isotope ratios are a sensitive indicator for past events on the planetary body and yield information about origin and transformation of the matter, back to events that occurred in the early solar system. Finally, measurements of radiogenic isotopes make it possible to carry out dating analyses. All these topics, particularly in situ dating analyses, quantitative elemental and highly accurate isotopic composition measurements, are top priority scientific questions for future lunar missions. An instrument for precise measurements of chemical composition will be a key element in scientific payloads of future landers or rovers on lunar surface. We present a miniature laser ablation mass spectrometer (LMS) designed for in situ research in planetary and space science and optimised for measurements of the chemical composition of rocks and soils on a planetary surface. By means of measurements of standard reference materials we demonstrate that LMS is a suitable instrument for in situ measurements of elemental and isotopic composition with high precision and accuracy. Measurements of soil standards are used to confirm known sensitivity coefficients of the instrument and to prove the power of LMS for quantitative elemental analyses [Neuland,2016]. For demonstration of the capability of LMS to measure the chemical composition of extraterrestrial material we use a sample of Allende meteorite [Neuland,2014]. Investigations of layered samples confirm the high spatial resolution in vertical direction of LMS [Grimaudo,2015], which allows in situ studying of past

  17. Developing a predictive model for the chemical composition of soot nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Violi, Angela [Univ. of Michigan, Ann Arbor, MI (United States); Michelsen, Hope [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Hansen, Nils [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Wilson, Kevin [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-04-07

    In order to provide the scientific foundation to enable technology breakthroughs in transportation fuel, it is important to develop a combustion modeling capability to optimize the operation and design of evolving fuels in advanced engines for transportation applications. The goal of this proposal is to develop a validated predictive model to describe the chemical composition of soot nanoparticles in premixed and diffusion flames. Atomistic studies in conjunction with state-of-the-art experiments are the distinguishing characteristics of this unique interdisciplinary effort. The modeling effort has been conducted at the University of Michigan by Prof. A. Violi. The experimental work has entailed a series of studies using different techniques to analyze gas-phase soot precursor chemistry and soot particle production in premixed and diffusion flames. Measurements have provided spatial distributions of polycyclic aromatic hydrocarbons and other gas-phase species and size and composition of incipient soot nanoparticles for comparison with model results. The experimental team includes Dr. N. Hansen and H. Michelsen at Sandia National Labs' Combustion Research Facility, and Dr. K. Wilson as collaborator at Lawrence Berkeley National Lab's Advanced Light Source. Our results show that the chemical and physical properties of nanoparticles affect the coagulation behavior in soot formation, and our results on an experimentally validated, predictive model for the chemical composition of soot nanoparticles will not only enhance our understanding of soot formation since but will also allow the prediction of particle size distributions under combustion conditions. These results provide a novel description of soot formation based on physical and chemical properties of the particles for use in the next generation of soot models and an enhanced capability for facilitating the design of alternative fuels and the engines they will power.

  18. Effect of the Chemical Composition on The Pyroplastic Deformation of Sanitaryware Porcelain Body

    Science.gov (United States)

    Yeşim Tunçel, Derya; Kerim Kara, Mustafa; Özel, Emel

    2011-10-01

    Pyroplastic deformation is the bending of a ceramic specimen caused by gravity during heat treatment. It can be defined as the loss of shape of product during its firing. Pyroplastic deformation is related to properties of liquid phases formed during firing. Therefore, the effect of the chemical composition on the pyroplastic deformation of sanitaryware porcelain was investigated in this study. Systematical compositional arrangements were made according to different combinations of (SiO2/Al2O3) and (Na2O/K2O) ratios by using Seger formula approach. Pyroplastic deformation behaviour of compositions within a controlled firing regime was investigated by using fleximeter. The bodies were also prepared in a special form by slip casting method at laboratory scale in order to determine the pyroplastic deformation of the samples. The experimental results showed that a definite combination at SiO2/Al2O3 ratio of 5 and Na2O/K2O ratio of 4 give the lowest pyroplastic deformation in the porcelain body formulations. The pyroplastic deformation value of this composition was determined as 25 mm which is 44% lower than that of the standard composition (45 mm).

  19. X-ray photoelectron spectroscopy for wheat powders: measurement of surface chemical composition.

    Science.gov (United States)

    Saad, Moustafa; Gaiani, Claire; Mullet, Martine; Scher, Joel; Cuq, Bernard

    2011-03-09

    The functional properties of wheat powders depend largely on the surface characteristics of their particles. X-ray photoelectron spectroscopy (XPS) has been considered to investigate the surface composition of wheat powders. The objective of the present study is to evaluate the ability of XPS to discriminate wheat components and to calculate the surface composition of wheat powders. First, XPS surveys for the main wheat isolated components (starch, proteins, arabinoxylans, and lipids) were determined. XPS results demonstrate that it is able to distinguish wheat proteins, polysaccharides, and lipids, but it is not able to distinguish starch and arabinoxylan because of their similarity in chemical structure. The XPS analyses of simple reconstituted wheat flours based on two components (starch and protein) or three components (by adding arabinoxylan) demonstrated the ability of XPS to measure the surface composition of the wheat flours. The surface composition of native wheat flour demonstrated an overrepresentation of protein (54%) and lipids (44%) and an underrepresentation of starch (2%) compared to the bulk composition. Results are discussed with regard to difficulties in discriminating arabinoxylans and starch components.

  20. Chemical composition of Pleurotus pulmonarius (Fr. Quél., substrates and residue after cultivation

    Directory of Open Access Journals (Sweden)

    Silva Sueli Oliveira

    2002-01-01

    Full Text Available The cultivation of Pleurotus pulmonarius was carried out on different substrate: cotton waste (A leaves of Cymbopogon citratus (B and leaves of Panicum maximum Jacq. (C. The mushroom had a varied chemical composition; nevertheless they contained a good composition for to be used as a good source of protein for human kind. The results showed the higher protein content (29.19% and fibre (9.0% for the mushroom that were cultivated on cotton peel. The substrate composition and the residue composition after the mushroom harvest were: Protein for the substrate "A" (10.63% and 9.35%, "B" (7.87% and 4.24% and "C" (7.55% and 5.90 %; Lipids "A" (4.17% and 2.03%, "B"(2.77% and 3.20% and "C" (0.91% and 2.05%; Fibres "A" (49.02% and 37.02%, "B" (28.40% and 23.26% and "C" (37.50% and 26.66% respectively. The substrate "A" showed 0.048% of iron and "C" 0.14% of magnesium, 0.31% of potassium and 0.26% of calcium. In the substrate "B" the quantity of the minerals were very low in comparison to the other substrates. The residues after the harvest of mushroom could be used as fertiliser or as complement in the composition for animal feed.

  1. Chemical Mechanical Polishing of Glass Substrate with α-Alumina-g-Polystyrene Sulfonic Acid Composite Abrasive

    Institute of Scientific and Technical Information of China (English)

    LEI Hong; BU Naijing; ZHANG Zefang; CHEN Ruling

    2010-01-01

    Abrasive is the one of key influencing factors during chemical mechanical polishing(CMP) process. Currently, α-Alumina (α-Al2O3) particle, as a kind of abrasive, has been widely used in CMP slurries, but their high hardness and poor dispersion stability often lead to more surface defects. After being polished with composite particles, the surface defects of work pieces decrease obviously. So the composite particles as abrasives in slurry have been paid more attention. In order to reduce defect caused by pure α-Al2O3 abrasive, α-alumina-g-polystyrene sulfonic acid (α-Al2O3-g-PSS) composite abrasive was prepared by surface graft polymerization. The composition, structure and morphology of the product were characterized by Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), time-of-flight secondary ion mass spectroscopy(TOF-SIMS), and scanning electron microscopy(SEM), respectively. The results show that polystyrene sulfonic acid grafts onto α-Al2O3, and has well dispersibility. Then, the chemical mechanical polishing performances of the composite abrasive on glass substrate were investigated with a SPEEDFAM-16B-4M CMP machine. Atomic force microscopy(AFM) images indicate that the average roughness of the polished glass substrate surface can be decreased from 0.835 nm for pure α-Al2O3 abrasive to 0.583 nm for prepared α-Al2O3-g-PSS core-shell abrasive. The research provides a new and effect way to improve the surface qualities during CMP.

  2. Study of morphology, chemical, and amino acid composition of red deer meat

    Directory of Open Access Journals (Sweden)

    Eleonora Okuskhanova

    2017-06-01

    Full Text Available Aim: The aim of this study was to evaluate red deer (maral meat quality based on chemical composition, pH, water-binding capacity (WBC, and amino acid content. Materials and Methods: Maral meat surface morphology measurements were obtained by scanning electron microscopy. Active acidity (pH was determined by potentiometry. Samples were analyzed for WBC by exudation of moisture to a filter paper by the application of pressure. Chemical composition (moisture, protein, fat, and ash fractions was obtained by drying at 150°C and by extraction, using ethylic ether, and ashing at 500-600°C. The amino acid composition was obtained by liquid chromatography. Results: Maral meat, with a pH of 5.85 and an average moisture content of 76.82%, was found to be low in fat (2.26%. Its protein content was 18.71% while its ash content was 2.21%. The amino acid composition showed that lysine (9.85 g/100 g, threonine (5.38 g/100 g, and valine (5.84 g/100 g predominated in maral meat, while phenylalanine (4.08 g/100 g, methionine (3.29 g/100 g, and tryptophan (0.94 g/100 g were relatively low in maral meat compared to other meats. The average WBC was found to be 65.82% and WBC was found to inversely correlate with moisture content. Conclusion: Low-fat content, high mineral content, and balanced amino-acid composition qualify maral meat as a worthy dietary and functional food.

  3. How much information do extinction and backscattering measurements contain about the chemical composition of atmospheric aerosol?

    Science.gov (United States)

    Kahnert, Michael; Andersson, Emma

    2017-03-01

    We theoretically and numerically investigate the problem of assimilating multiwavelength lidar observations of extinction and backscattering coefficients of aerosols into a chemical transport model. More specifically, we consider the inverse problem of determining the chemical composition of aerosols from these observations. The main questions are how much information the observations contain to determine the particles' chemical composition, and how one can optimize a chemical data assimilation system to make maximum use of the available information. We first quantify the information content of the measurements by computing the singular values of the scaled observation operator. From the singular values we can compute the number of signal degrees of freedom, Ns, and the reduction in Shannon entropy, H. As expected, the information content as expressed by either Ns or H grows as one increases the number of observational parameters and/or wavelengths. However, the information content is strongly sensitive to the observation error. The larger the observation error variance, the lower the growth rate of Ns or H with increasing number of observations. The right singular vectors of the scaled observation operator can be employed to transform the model variables into a new basis in which the components of the state vector can be partitioned into signal-related and noise-related components. We incorporate these results in a chemical data assimilation algorithm by introducing weak constraints that restrict the assimilation algorithm to acting on the signal-related model variables only. This ensures that the information contained in the measurements is fully exploited, but not overused. Numerical tests show that the constrained data assimilation algorithm provides a solution to the inverse problem that is considerably less noisy than the corresponding unconstrained algorithm. This suggests that the restriction of the algorithm to the signal-related model variables suppresses

  4. The chemical compositions of solar twins in the open cluster M67

    Science.gov (United States)

    Liu, F.; Asplund, M.; Yong, D.; Meléndez, J.; Ramírez, I.; Karakas, A. I.; Carlos, M.; Marino, A. F.

    2016-11-01

    Stars in open clusters are expected to share an identical abundance pattern. Establishing the level of chemical homogeneity in a given open cluster deserves further study as it is the basis of the concept of chemical tagging to unravel the history of the Milky Way. M67 is particularly interesting given its solar metallicity and age as well as being a dense cluster environment. We conducted a strictly line-by-line differential chemical abundance analysis of two solar twins in M67: M67-1194 and M67-1315. Stellar atmospheric parameters and elemental abundances were obtained with high precision using Keck/High Resolution Echelle Spectrometer spectra. M67-1194 is essentially identical to the Sun in terms of its stellar parameters. M67-1315 is warmer than M67-1194 by ≈150 K as well as slightly more metal-poor than M67-1194 by ≈0.05 dex. M67-1194 is also found to have identical chemical composition to the Sun, confirming its solar-twin nature. The abundance ratios [X/Fe] of M67-1315 are similar to the solar abundances for elements with atomic number Z ≤ 30, while most neutron-capture elements are enriched by ≈0.05 dex, which might be attributed to enrichment from a mixture of asymptotic giant branch ejecta and r-process material. The distinct chemical abundances for the neutron-capture elements in M67-1315 and the lower metallicity of this star compared to M67-1194, indicate that the stars in M67 are likely not chemically homogeneous. This poses a challenge for the concept of chemical tagging since it is based on the assumption of stars forming in the same star-forming aggregate.

  5. [Influence of primers ' chemical composition on shear bond strength of resin cement to zirconia ceramic].

    Science.gov (United States)

    Łagodzińska, Paulina; Bociong, Kinga; Dejak, Beata

    2014-01-01

    Resin cements establish a strong durable bond between zirconia ceramic and hard tissues of teeth. It is essential to use primers with proper chemical composition before cementation. The aim of this study was to assess the influence of primer's chemical composition on the shear bond strength of zirconia ceramic to resin cements. 132 zirconia specimens were randomly assigned to four groups. There were four resin systems used. They included resin cement and respective primer, dedicated to zirconia: Clearfil Ceramic Primer/Panavia F2.0, Monobond Plus/Multilink Automix, AZ - Primer/ResiCem, Z - Prime Plus/Duo-Link. In each group the protocol of cementation was as follows: application of primer to the zirconia surface and application of the respective resin cement in cylindric mold (dimensions: 3.0 mm height and 3.0 mm diameter). Then, the shear bond strength was evaluated and the failure type was assessed in lupes (×2.5 magnification), also random specimens under SEM. The Wilcoxon test was used to analyze the data, the level of significance was α = 0.05. Finally, the known chemical composition of each primer was analysed in reference to probable chemical bonds, which may occure between primers and zirconia. The mean shear bond strength between resin cements and zirconia was the highest for Z-Prime Plus/Duo-Link (8.24 ± 3,21 MPa) and lowest for Clearfil Ceramic Primer/Panavia F 2.0 (4.60 ± 2.21 MPa). The analysis revealed significant difference between all groups, except pair Clearfil Ceramic Primer/Panavia F 2.0 and AZ-Primer/ResiCem. The failure type in groups of Clearfil Ceramic Primer/Panavia F 2.0 and AZ-Primer/ResiCem was mainly adhesive, in groups Monobond Plus/ /Multilink Automix and Z-Prime Plus/Duo-Link mainly mixed. The chemical composition of primers affects different bond mechanisms between resin cements and zirconia. The highest shear bond strength of resin cement to zirconia can be obtained for the primer composed of 10-Methacryloyloxydecyl dihydrogen

  6. Chemical composition of aerosol in the atmospheric surface layer of the East Antarctica coastal zone

    Directory of Open Access Journals (Sweden)

    L. P. Golobokova

    2016-01-01

    Full Text Available Chemical composition of aerosol in the ground layer of the coastal zone in East Antarctica is analyzed in the article. The aerosol samples were taken in 2006–2015 during seasonal works of the Russian Antarctic Expeditions (RAE, namely, these were 52nd–53rd, 55th, and 58th–60th expeditions. Samples were taken in the 200‑km band of the sea-shore zone along routes of the research vessels (REV «Akademik Fedorov» and «Akademik Treshnikov» as well as on territories of the Russian stations Molodezhnaya and Mirny. Although the results obtained did show the wide range of the aerosol concentrations and a certain variability of their chemical composition, some common features of the variability were revealed. Thus, during the period from 2006 to 2014 a decrease of average values of the sums were noted. Spatially, a tendency of decreasing of the ion concentrations was found in the direction from the station Novolazarevskaya to the Molodezhnaya one, but the concentrations increased from the Molodezhnaya to the station Mirny. The sum of ions of the aerosol in the above mentioned coastal zone was, on the average, equal to 2.44 μg/m3, and it was larger than that on the territory of the Antarctic stations Molodezhnaya (0,29 μg/m3 and Mirny (0,50 ág / m3. The main part to the sum of the aerosol ions on the Antarctic stations was contributed by Na+, Ca2+, Cl−, SO4 2−. The main ions in aerosol composition in the coastal zone are ions Na+ and Cl−. The dominant contribution of the sea salt and SO4 2− can be traced in not only the composition of atmospheric aerosols, but also in the chemical composition of the fresh snow in the coastal areas of East Antarctica: at the Indian station Maitri, on the Larsemann Hills, and in a boring located in 55.3 km from the station Progress (K = 1.4÷6.1. It was noted that values of the coefficient of enrichment K of these ions decreases as someone moves from a shore to inland. Estimation of

  7. Influence of genotype and feeding on chemical composition of organic chicken meat

    Directory of Open Access Journals (Sweden)

    Achille Franchini

    2010-01-01

    Full Text Available The aim of this study was to evaluate the effects of different genotypes and of feeding on meat chemical composition, including fatty acid profile, of chickens reared under organic conditions. Twomeat–typefast-growing(FG andmedium-growing(MG, andoneegg-typeslow-growing(SG wo meat–type fast-growing (FG and medium-growing (MG, and one egg-type slow-growing (SG strains were assigned to 2 different diets differing for the protein source: soybean (SB and faba bean (FB in partial substitution of soybean. Genotypemarkedlyaffectedthemeatchemical composition. Genotype markedly affected the meat chemical composition. SG breast and thigh meat showed lower content of lipids (P<0.01 than FG. Thehighestproportions he highest proportions of polyunsaturated fatty acids (PUFA n-6 and n-3 and the lowest proportion of monounsaturated (MUFA (P<0.01, as well as the lowest ratio of PUFA n6/n3 (P<0.01 were found in SG breast and thigh meat. MG showed always intermediate values. Asforfeeding, FBtreatmentproducedonlya As for feeding, FB treatment produced only a slight increment of protein in breast and a decrease of fat and ash in thigh meat. Total PUFA and PUFA n-6 resulted lower in both thigh and breast meat of FB groups compared to SB (P<0.01.

  8. Chemical composition and amino acid profile of differently processed feather meal

    Directory of Open Access Journals (Sweden)

    Adejumo Oluseun Isaac

    2016-01-01

    Full Text Available Feather wastes represent potential alternative ingredients for animal feedstuffs which can ameliorate the protein shortage for food and feed. Previous attempts to provide information about the nutrient composition of feather meal are either too complicated for rural livestock farmers in developing countries or they provided incomplete information on chemical composition. Washed feathers were subjected to different processing techniques such as pre-soaking in distilled water, wood ash, 0.3M NaOH, a mixture of wood ash and 0.3M NaOH, incubated at 37°C and boiled at 150°C for 60 minutes. Treated feather meals were analysed for chemical composition and amino acid profile. The overall result showed that feather meal pre-soaked with wood ash for 24 hr boiled at 150oC for 60 minutes, those pre-soaked with 0.3M NaOH and wood ash incubated at 37°C for 24 hr boiled at 150°C for 60 minutes and raw feather meal pre-soaked in distilled water for 24 hr boiled at 150°C for 60 minutes gave better results. Wood ash and 0.3M NaOH and their mixture could enhance the nutritional value of feather meal.

  9. Chemical Composition and Vasorelaxant and Antispasmodic Effects of Essential Oil from Rosa indica L. Petals

    Directory of Open Access Journals (Sweden)

    Hafiz Majid Rasheed

    2015-01-01

    Full Text Available Rosa indica L. belongs to the family Rosaceae and is locally known as gulaab. It has different traditional uses in cardiovascular and gastrointestinal disorders but there is no scientific data available in this regard. Therefore, the basic aim of this study was to explore the chemical composition and gastrointestinal and cardiovascular effects of the essential oil obtained from R. indica. The chemical composition of the essential oil was investigated using gas chromatography-mass spectrometry (GC-MS technique. The cardiovascular and gastrointestinal effects were investigated using electrophysiological measurements. The GC-MS analysis of the essential oil showed various chemical components including acetic acid, mercaptohexyl ester, butanoic acid, 2-methyl-5-oxo-1-cyclopentene-1-yl ester, artemiseole, methyl santonilate, isosteviol, caryophyllene oxide, pentyl phenyl acetate, dihydromyrcene, 1,5-octadecadien, octadecanoic acid, ethyl ester, palmitic acid (2-phenyl-1,3-dioxolan-4-yl methyl ester, santolina epoxide, and 9-farnesene. The electrophysiological measurements revealed that essential oil was more potent against K+ (80 mM than phenylephrine precontractions using isolated rabbit aorta preparations. In isolated rabbit jejunum preparations, it showed more potency against high K+ induced contractions than spontaneous contractions. Considering these evidences, it can be concluded that R. indica essential oil may work as a complementary and alternative medicine in gastrointestinal and cardiovascular diseases.

  10. Chemical composition of essential oils of leaves, flowers and fruits of Hortia oreadica

    Directory of Open Access Journals (Sweden)

    Danillo L. Santos

    2016-02-01

    Full Text Available Abstract Hortia oreadica Groppo, Kallunki & Pirani, Rutaceae, known as “para-tudo”, “quina”, and “quina-do-campo”, is used in traditional medicine locally to treat stomach pain and fevers. The aims of this study were: analyze the chemical composition of essential oils from leaves, flowers and fruits of H. oreadica and verify the seasonal variation of the chemical components of essential oils from leaves. The essential oils were obtained by hydrodistillation using a Clevenger type apparatus and analyzed by GC/MS. The major components found in the samples of the essential oils were the amorpha-4,7(11-diene (29.27% – flowers, 20.26% – fruits, 27.66–37.89% – leaves, bicyclogermacrene (23.28% – flowers, 20.64% – fruits, 14.71% to 31.37% – leaves. This work represents the first study of the chemical composition of essential oils from leaves, flowers and fruits and seasonal variation in the essential oils from leaves of H. oreadica.

  11. Organic and mineral fertilization and chemical composition of lemon balm (Melissa officinalis essential oil

    Directory of Open Access Journals (Sweden)

    Ana Carolina B. Sodré

    2012-02-01

    Full Text Available Melissa officinalis L., Lamiaceae, is an herb with great growth prospects in the cosmetic industry due to its essential oil. In order to improve its production, it is necessary to study related agricultural practices. This study evaluated the effect of organic and mineral fertilization on the chemical composition of lemon balm (Melissa officinalis L. essential oil. The assay was conducted at the "Fazenda Experimental do Glória" of the Federal University of Uberlândia, and essential oil extraction and GC/MS analyses were completed by the Centre for Research and Development on Plant Genetic Resources of the Campinas Agronomic Institute. The assay was conducted in a randomized complete block design with three replications. The tested treatments were six types of fertilization (0, 1, 2, 4, 8 kg.m-2 of cattle manure and mineral fertilizing with 60 g.m-2 of NPK 4-14-8 + 4 g.m-2 of boric acid with four replications. The essential oil was extracted by hydrodistillation in a modified Clevenger apparatus. The chemical composition was analyzed by GC/MS. The essential oil presented the same compounds for all treatments; however, the relative proportion of some chemical constituents was altered according to the treatment. Neral, geranial, and citronellal were the major constituents.

  12. Chemical composition changes in eucalyptus and pinus woods submitted to heat treatment.

    Science.gov (United States)

    Brito, J O; Silva, F G; Leão, M M; Almeida, G

    2008-12-01

    This study investigated the influence of heat treatment on the chemical composition of Eucalyptus saligna and Pinus caribaea var. hondurensis woods to understand its role in wood processing. E. saligna and P. caribaea var. hondurensis woods were treated in a laboratorial electric furnace at 120, 140, 160 and 180 degrees C to induce their heat treatment. The chemical composition of the resulting products and those from original wood were determined by gas chromatography. Eucalyptus and Pinus showed a significant reduction in arabinose, manose, galactose and xylose contents when submitted to increasing temperatures. No significant alteration in glucose content was observed. Lignin content, however, increased during the heat process. There was a significant reduction in extractive content for Eucalyptus. On the other hand, a slight increase in extractive content has been determined for the Pinus wood, and that only for the highest temperature. These different behaviors can be explained by differences in chemical constituents between softwoods and hardwoods. The results obtained in this study provide important information for future research and utilization of thermally modified wood.

  13. The Composition of the Sagittarius Dwarf Spheroidal Galaxy and Implications for Nucleosynthesis and Chemical Evolution

    CERN Document Server

    McWilliam, A; William, Andrew Mc; Smecker-Hane, Tammy A.

    2004-01-01

    We outline the results of a study of the chemical composition of 14 stars in the Sagittarius dwarf spheroidal galaxy (Sgr dSph). For the Sgr dSph stars with [Fe/H]>-1 the abundances are highly unusual, showing a striking enhancement in heavy s-process elements, increasing with [Fe/H], deficiencies of the alpha- elements (O, Si, Ca, and Ti), deficiencies of Al and Na, and deficiencies of the iron-peak elements Mn and Cu. Our abundances suggest that the composition of the metal-rich Sgr dSph stars is dominated by the ejecta of an old, metal-poor population, including products of AGB stars and type Ia supernovae (SN). We suggest two scenarios to explain the observations: Prolonged chemical evolution in a galaxy experiencing significant mass-loss, and chemical enrichment with episodic bursts of star formation. The Galactic globular cluster Omega Cen, and the Fornax dwarf galaxy show similar abundance patterns, which suggests that those systems evolved similar to the Sgr dSph.

  14. The Influence of Nanoadditives on the Biological Properties and Chemical Composition of Process Fluids

    Directory of Open Access Journals (Sweden)

    Borůvková K.

    2015-12-01

    Full Text Available In this study process fluids were tested after the addition of nanoparticles. Cooling and lubricating process fluids are used in machining to reduce wear on tools, to increase machine performance and to improve product quality. The use of process fluids leads to their pollution and contamination. Nanoparticles were added to the process fluids in order to increase their antibacterial activity. The selected nanoparticles were nanoparticles of metallic silver. The process fluids were modified by the addition of silver nitrate and ascorbic acid. Reduction of silver nanoparticles in the volume of the fluid was achieved using UV. The modified fluids were tested for their cytotoxicity and changes in chemical composition. The cytotoxicity of process fluids was tested for the purpose of verifying whether the process fluids, which are in direct contact with the skin of the operator, affect the health of the operator. The cytotoxicity of the process fluids was tested on human fibroblast cells. Fibroblasts are the basic cells of fibrous tissue. The cytotoxicity was tested by measuring the cell viability and using XTT. Analysis of chemical composition was performed for the purpose of determining the individual substances in the process fluids and their chemical stability. Qualitative analysis of the process fluids was performed using gas chromatography mass spectrometry (GC - MS.

  15. Influence of Stellar Flares on the Chemical Composition of Exoplanets and Spectra

    Science.gov (United States)

    Venot, Olivia; Rocchetto, Marco; Carl, Shaun; Roshni Hashim, Aysha; Decin, Leen

    2016-10-01

    More than three thousand exoplanets have been detected so far, and more and more spectroscopic observations of exoplanets are performed. Future instruments (James Webb Space Telescope (JWST), E-ELT, PLATO, Ariel, etc.,) are eagerly awaited, as they will be able to provide spectroscopic data with greater accuracy and sensitivity than what is currently available. This will allow more accurate conclusions to be drawn regarding the chemistry and dynamics of exoplanetary atmospheres, provided that the observational data are carefully processed. One important aspect to consider is temporal stellar atmospheric disturbances that can influence the planetary composition, and hence spectra, and potentially can lead to incorrect assumptions about the steady-state atmospheric composition of the planet. In this paper, we focus on perturbations coming from the host star in the form of flare events that significantly increase photon flux impingement on the exoplanets atmosphere. In some cases, particularly for M stars, this sudden increase may last for several hours. We aim to discover to what extent a stellar flare is able to modify the chemical composition of the planetary atmosphere and, therefore, influence the resulting spectra. We use a one-dimensional thermo-photochemical model to study the neutral atmospheric composition of two hypothetical planets located around the star AD Leo. We place the two planets at different distances from the star, which results in effective atmospheric temperatures of 412 and 1303 K. AD Leo is an active star that has already been observed during a flare. Therefore, we use the spectroscopic data from this flare event to simulate the evolution of the chemical composition of the atmospheres of the two hypothetical planets. We compute synthetic spectra to evaluate the implications for observations. The increase in the incoming photon flux affects the chemical abundances of some important species (such as H and NH3), down to altitudes associated with

  16. Chemical composition and biological activity of essential oils of Dracocephalum heterophyllum and Hyssopus officinalis from Western Himalaya

    Science.gov (United States)

    The essential oils of two representatives of the Lamiaceae-family, Dracocephalum heterophyllum Benth. and Hyssopus officinalis L., are described for their antifungal, antibacterial and larvicidal as well as biting deterrent activities. Additionally, the essential oils’ chemical compositions, analyze...

  17. The influence of water management and environmental conditions on the chemical composition and beverage quality of coffee beans

    OpenAIRE

    Silva,Emerson A da; MAZZAFERA, Paulo; Brunini,Orivaldo; Sakai,Emílio; Flávio B. Arruda; Mattoso,Luiz Henrique C.; Carvalho, Cássia R. L.; Pires, Regina Célia M.

    2005-01-01

    The influence of environmental conditions and irrigation on the chemical composition of green coffee beans and the relationship of these parameters to the quality of the beverage were investigated in coffee plantations in the regions of Adamantina, Mococa and Campinas, in the state of São Paulo, Brazil. The chemical composition and physical aspects of green coffee beans produced in the three regions were related through Principal Component Analyses (PCA) to the quality of beverage, as determi...

  18. Chemical composition and physical quality characteristics of Ghanaian cocoa beans as affected by pulp pre-conditioning and fermentation

    OpenAIRE

    Afoakwa, Emmanuel Ohene; Quao, Jennifer; Takrama, Jemmy; Budu, Agnes Simpson; Saalia, Firibu Kwesi

    2011-01-01

    Investigations were conducted to evaluate the effects of pod storage (as a means of pulp preconditioning) and fermentation on the chemical composition and physical characteristics of Ghanaian cocoa beans. A 4 × 2 full factorial design with factors as pod storage (0, 7, 14, 21 days) and cocoa treatment (fermented and unfermented) were conducted. Samples were analyzed for their chemical composition (moisture, crude fat, crude protein, ash and carbohydrate content) and mineral content using stan...

  19. Influence of paragenetic factors on production and chemical composition of Paška sheep milk

    Directory of Open Access Journals (Sweden)

    Dubravka Samaržija

    2011-09-01

    Full Text Available Since the produced Paška sheep milk is entirely processed in Pag cheese, it is of great importance to ensure a uniform milk production of prescribed chemical composition and hygienic quality. In addition to genotype, as the most important factor, the production and quality of sheep milk is affected by numerous physiological factors, so the aim of this research was to determine the influence of paragenetic factors (stage and number of lactation on daily milk yield and chemical composition (total solids, milk fat, protein, casein, lactose, total solids non fat of Paška sheep milk. Three herds were chosen by random selection within the areas of Kolan and Caska, and survey was conducted on a total of 213 Paška sheep. Stage of lactation was divided to: the beginning (to 50th-day, the middle (from 51st till 100thday and the end (101st -day till dry out of lactation. Depending on the number of lactation, sheep were grouped into five groups (1st, 2nd, 3rd, 4th, 5th and others. A significant influence of stage and number of lactation on average daily milk yield and analysed chemical composition parameters was determined. The Paška sheep had the highest daily milk production in the mid lactation (773 g, and the third lactation (712 g recorded. At the end of lactation, total solids, milk fat, protein, casein, total solids non fat in milk were significantly higher than at the beginning and middle of lactation. The highest share of total solids, milk fat, protein and casein was determined in Paška sheep milk at 5th lactation and other lactations. Between the individual parameters significantcorrelation coefficients were determined.

  20. In situ chemical composition measurement of individual cloud residue particles at a mountain site, southern China

    Science.gov (United States)

    Lin, Qinhao; Zhang, Guohua; Peng, Long; Bi, Xinhui; Wang, Xinming; Brechtel, Fred J.; Li, Mei; Chen, Duohong; Peng, Ping'an; Sheng, Guoying; Zhou, Zhen

    2017-07-01

    To investigate how atmospheric aerosol particles interact with chemical composition of cloud droplets, a ground-based counterflow virtual impactor (GCVI) coupled with a real-time single-particle aerosol mass spectrometer (SPAMS) was used to assess the chemical composition and mixing state of individual cloud residue particles in the Nanling Mountains (1690 m a. s. l. ), southern China, in January 2016. The cloud residues were classified into nine particle types: aged elemental carbon (EC), potassium-rich (K-rich), amine, dust, Pb, Fe, organic carbon (OC), sodium-rich (Na-rich) and Other. The largest fraction of the total cloud residues was the aged EC type (49.3 %), followed by the K-rich type (33.9 %). Abundant aged EC cloud residues that mixed internally with inorganic salts were found in air masses from northerly polluted areas. The number fraction (NF) of the K-rich cloud residues increased within southwesterly air masses from fire activities in Southeast Asia. When air masses changed from northerly polluted areas to southwesterly ocean and livestock areas, the amine particles increased from 0.2 to 15.1 % of the total cloud residues. The dust, Fe, Pb, Na-rich and OC particle types had a low contribution (0.5-4.1 %) to the total cloud residues. Higher fraction of nitrate (88-89 %) was found in the dust and Na-rich cloud residues relative to sulfate (41-42 %) and ammonium (15-23 %). Higher intensity of nitrate was found in the cloud residues relative to the ambient particles. Compared with nonactivated particles, nitrate intensity decreased in all cloud residues except for dust type. To our knowledge, this study is the first report on in situ observation of the chemical composition and mixing state of individual cloud residue particles in China.

  1. Some Chemical Compositional Changes in Miscanthus and White Oak Sawdust Samples during Torrefaction

    Directory of Open Access Journals (Sweden)

    J. Richard Hess

    2012-10-01

    Full Text Available Torrefaction tests on miscanthus and white oak sawdust were conducted in a bubbling sand bed reactor to see the effect of temperature and residence time on the chemical composition. Process conditions for miscanthus and white oak sawdust were 250–350 °C for 30–120 min and 220–270 °C for 30 min, respectively. Torrefaction of miscanthus at 250 °C and a residence time of 30 min resulted in a significant decrease in moisture—about 82.68%—but the other components—hydrogen, nitrogen, sulfur, and volatiles—changed only marginally. Increasing torrefaction temperatures to 350 °C with a residence time of 120 min further reduced the moisture content to 0.54%, with a significant decrease in the hydrogen, nitrogen, and volatiles by 58.29%, 14.28%, and 70.45%, respectively. Regression equations developed for the moisture, hydrogen, nitrogen, and volatile content of the samples with respect to torrefaction temperature and time have adequately described the changes in chemical composition based on R2 values of >0.82. Surface plots based on the regression equation indicate that torrefaction temperatures of 280–350 °C with residence times of 30–120 min can help reduce moisture, nitrogen, and volatile content from 1.13% to 0.6%, 0.27% to 0.23%, and 79% to 23%, with respect to initial values. Trends of chemical compositional changes in white oak sawdust are similar to miscanthus. Torrefaction temperatures of 270 °C and a 30 min residence time reduced the moisture, volatiles, hydrogen, and nitrogen content by about 79%, 17.88%, 20%, and 5.88%, respectively, whereas the carbon content increased by about 3.5%.

  2. Evaluation of various feedstuffs of ruminants in terms of chemical composition and metabolisable energy content

    Directory of Open Access Journals (Sweden)

    Dinesh Kumar

    2015-05-01

    Full Text Available Aim: The aim was to determine the chemical composition and metabolisable energy (ME content of feedstuffs used in ruminant animals using in vitro method. Materials and Methods: A total of 18 feedstuffs used for ruminant feeding including cultivated non-leguminous fodders like maize, sorghum, pearl millet, and oat; leguminous fodders like cowpea and berseem; agro-industrial by-products such as wheat bran, deoiled rice bran, rice polish, wheat straw, and concentrates such as mustard oil cake, groundnut cake, soybean meal, cotton seed cake, grains like maize, oat, wheat, and barley were taken for this study. Chemical compositions and cell wall constituents of test feeds were determined in triplicate. The crude protein (CP content was calculated as nitrogen (N × 6.25. True dry matter digestibility (TDMD, true organic matter digestibility (TOMD, ME, and partitioning factor (PF values were determined by in vitro gas production technique (IVGPT. Results: The CP content of non-leguminous fodders varied from 7.29% (sorghum to 9.51% (maize, but leguminous fodders had less variation in CP. Oilseed cakes/meals had high CP and ether extract (EE content than other feedstuffs except rice polish, which had 12.80% EE. Wheat straw contained highest fiber fractions than the other ingredients. ME content was highest in grains (wheat-12.02 MJ/kg and lowest in wheat straw (4.65 MJ/kg and other roughages. TDMD of grains and oilseed cakes/meals were higher than the fodders and agro-industrial by-products. The same trend was observed for TOMD. Conclusions: It was concluded that the energy feeds showed a great variation in chemical composition and ME content. The results of this study demonstrated that the kinetics of gas production of energy feed sources differed among themselves. Evaluation of various feedstuffs is helpful in balanced ration formulation for field animals and under farm conditions for better utilization of these commonly available feed resources.

  3. Chemical composition, quality and histochemical characteristics of individual dromedary camel (Camelus dromedarius) muscles.

    Science.gov (United States)

    Kadim, I T; Al-Karousi, A; Mahgoub, O; Al-Marzooqi, W; Khalaf, S K; Al-Maqbali, R S; Al-Sinani, S S H; Raiymbek, G

    2013-03-01

    This study characterized the chemical composition, quality and histological traits of six muscles from 10 dromedary carcasses. There were significant differences in moisture, fat, protein, mineral, saturated and unsaturated fatty acid contents between muscles. The longissimus thoracis (LT) had the highest cooking loss (33.5%) and triceps brachii (TB) the lowest (29.2%). The shear force value of semitendinosus (ST), semimembranosus (SM) and biceps femoris (BF) were significantly higher than infraspinatus (IS), TB and LT. The LT had significantly higher values for L*, a*, b* than ST. The SM had the lowest MFI (65.3), while IS had the highest value (75.8). The ST significantly had the highest and lowest proportions of Type I and Type IIA muscle fibers, respectively than other muscles. This study indicated that composition, quality, and histochemical parameters varied among camel muscles and the knowledge of this variation allows for better marketing and processing of camel meat.

  4. Diesel Surrogate Fuels for Engine Testing and Chemical-Kinetic Modeling: Compositions and Properties

    Science.gov (United States)

    Mueller, Charles J.; Cannella, William J.; Bays, J. Timothy; Bruno, Thomas J.; DeFabio, Kathy; Dettman, Heather D.; Gieleciak, Rafal M.; Huber, Marcia L.; Kweon, Chol-Bum; McConnell, Steven S.; Pitz, William J.; Ratcliff, Matthew A.

    2016-01-01

    The primary objectives of this work were to formulate, blend, and characterize a set of four ultralow-sulfur diesel surrogate fuels in quantities sufficient to enable their study in single-cylinder-engine and combustion-vessel experiments. The surrogate fuels feature increasing levels of compositional accuracy (i.e., increasing exactness in matching hydrocarbon structural characteristics) relative to the single target diesel fuel upon which the surrogate fuels are based. This approach was taken to assist in determining the minimum level of surrogate-fuel compositional accuracy that is required to adequately emulate the performance characteristics of the target fuel under different combustion modes. For each of the four surrogate fuels, an approximately 30 L batch was blended, and a number of the physical and chemical properties were measured. This work documents the surrogate-fuel creation process and the results of the property measurements. PMID:27330248

  5. Effect of chemical composition and alumina content on structure and properties of ceramic insulators

    Indian Academy of Sciences (India)

    Arman Sedghi; Nastaran Riahi-Noori; Naser Hamidnezhad; Mohammad Reza Salmani

    2014-04-01

    In the present work, six electrical porcelain compositions with different amount of alumina and silica have been prepared and fired in an industrial furnace at 1300°C. Density, porosity, bending strength and electrical strength were measured in the samples. In order to find a relationship between properties and sample microstructures, samples were analyzed by scanning electron microscope (SEM) and x-ray diffraction (XRD) techniques. The results showed that, with chemical composition of 53.5 wt.% SiO2 and 37.5 wt.% alumina, highest electrical strength of 21.97 kV/mm was achieved in fabricated electrical porcelains. Increasing amount of alumina up to 30 wt.% decreases quartz and cristobalite phases, but increases corundum phase 3 to 5 times. SEM observation revealed that dense particles and uniform distribution of long and thin needle shaped mullite are predominant in sample microstructures with highest electrical strength.

  6. Physico-chemical characteristics of gamma irradiation crosslinked poly(vinyl alcohol/magnetite ferrogel composite

    Directory of Open Access Journals (Sweden)

    Marinović-Cincović Milena T.

    2014-01-01

    Full Text Available Magnetic field sensitive gels, ferrogels are new promising class of hydrogels. The coupling of hydrogels and magnetic particles has potential application in soft actuators such as artificial muscles or for hyperthermia application. Here a composite of magnetite particles (Fe3O4 and poly(vinyl alcohol (PVA hydrogel is developed using gamma irradiation as a crosslinking agent. PVA and Fe3O4 were chosen because of their well-established biocompatibility, radiation crosslinking potential (PVA, mild magnetic properties and the Curie point near desired heating temperature range (Fe3O4. Physico-chemical characteristics of these systems show the effect of the presence of particles in the process of radiation-induced crosslinking. Obtained PVA/Fe3O4 ferrogel composite has greater swelling capacity, activation energy of dehydration and dehydration rate compared to PVA hydrogel, crosslinked under the same conditions. [Projekat Ministarstva nauke Republike Srbije, br. III 45005 i br. 172056

  7. QCD Dirac Spectrum at Finite Chemical Potential: Anomalous Effective Action, Berry Phase and Composite Fermions

    CERN Document Server

    Liu, Yizhuang

    2015-01-01

    We show that the QCD Dirac spectrum at finite chemical potential using a 2-matrix model in the spontaneously broken phase, is amenable to a generic 2-dimensional effective action on a curved eigenvalue manifold. The eigenvalues form a droplet with strong screening and non-linear plasmons. The droplet is threaded by a magnetic vortex which is at the origin of a Berry phase. The adiabatic transport in the droplet maps onto the one in the fractional quantum Hall effect, suggesting that composite fermions at half filling are Dirac particles. We use this observation to argue for two novel anomalous effects in the edge transport of composite fermions, and conversely on a novel contribution to the QCD quark condensate in a rotating frame.

  8. Chemical characterization of smoke from the production process of wood-plastic composites

    Institute of Scientific and Technical Information of China (English)

    Wang Shi-fa; Zhang Ai-jun

    2007-01-01

    The chemical composition of unpleasant smell, emitted from the production process of wood-plastic composites using Manchurian ash sawdust (Fraxinus mandschurica Rupr.) and polypropylene powder as the raw material, was investigated. Wood sawdust and polypropylene powder were subjected to heat treatment to 290℃ during 8 min (the conditions were similar to those employed on an industrial scale). The emitted compounds were collected and analyzed by gas chromatography-mass spectrometry (GC-MS). The analytical results showed that the unpleasant smell was emitted from the pyrogenation of wood sawdust rather than from the polypropylene powder. Nine types of compounds (hydrocarbons, ethers, phenols, aldehydes, ketones, alcohols, acids and their derivatives, furan and its derivatives, and nitrogen-containing compounds) were collected in the gas phase during heating.Among those 126 components detected by GC-MS, 112 compounds were identified.

  9. Effect of cottonseed oilcake inclusion on ostrich growth performance and meat chemical composition.

    Science.gov (United States)

    Dalle Zotte, A; Brand, T S; Hoffman, L C; Schoon, K; Cullere, M; Swart, R

    2013-02-01

    This study investigated the effect of replacing dietary soybean oilcake meal with increasing levels of cottonseed oilcake meal (CSOCM) on the growth performance and meat (Iliofibularis muscle) chemical composition of ostriches in order to decrease total feed costs. A total of 105 ostriches were divided into five feeding groups according to the CSOCM inclusion level in the whole diet: Control (0% CSOCM), 3%, 6%, 9% and 12% CSOCM (of the whole diet), and fed with experimental diets from 6 to 13 months of age. As a result of feeding CSOCM, the final live weight and the average daily gain significantly increased in the 12% CSOCM group. The proximate composition, cholesterol content, mineral and fatty acid profile of the meat remained unaffected. Thus CSOCM may be used as an alternative protein source to the more expensive soybean oilcake meal in ostrich nutrition.

  10. Antioxidant capacity and chemical composition in seeds rich in omega-3: chia, flax, and perilla

    Directory of Open Access Journals (Sweden)

    Sheisa Cyléia Sargi

    2013-09-01

    Full Text Available The chemical composition and antioxidant capacity of five seeds, chia, golden flax, brown flax, white perilla, and brown perilla, were determined. The chemical properties analyzed included moisture, ash, crude protein, carbohydrates, total lipids, fatty acids, and antioxidant capacity (ABTS•+, DPPH•, and FRAP. The results showed the highest amounts of protein and total lipids in brown and white perilla. Perilla and chia showed higher amounts of alpha-linolenic fatty acid than those of flaxseed varieties, ranging between 531.44 mg g-1 of lipids in brown perilla, 539.07 mg g-1 of lipids in white perilla, and 544.85 mg g-1 of lipis in chia seed. The antioxidant capacity of the seeds, evaluated with ABTS•+, DPPH• , and FRAP methods, showed that brown perilla had greater antioxidant capacity when compared with white perilla, flax, and chia seeds.

  11. HONEYDEW HONEY: CORRELATIONS BETWEEN CHEMICAL COMPOSITION, ANTIOXIDANT CAPACITY AND ANTIBACTERIAL EFFECT

    Directory of Open Access Journals (Sweden)

    OTILIA BOBIS

    2013-12-01

    Full Text Available Selected physico-chemical parameters, total polyphenols, flavonoids, antioxidant and antibacterial activity of honeydew honey samples from Romanian were determined. Regarding the chemical composition, analysed honey samples framed in this type of honey, phenolic content, determined as gallic acid equivalents, presented a mean value of 116.45mg GAE/100 g honey. Total flavonoid content expressed as quercetin equivalents, was 1.53 mg in honeydew honey. Antioxidant activity expressed as % inhibition of a solution of DPPH, ranged between 47.84 and 62.99%. The concentration of honey that inhibit with 50% the DPPH solution was established to be 16.16%. 10 strains of Staphylococcus aureus presented different inhibition percentages when were treatred with a solution of honey. In conclusion, Honeydew honey could be recommended to complement other polyphenol source in human diet and also used in medical treatment.

  12. Variability of biomass chemical composition and rapid analysis using FT-NIR techniques

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Lu [University of Tennessee, Knoxville (UTK); Ye, Philip [University of Tennessee, Knoxville (UTK); Womac, A.R. [University of Tennessee; Sokhansanj, Shahabaddine [ORNL

    2010-04-01

    A quick method for analyzing the chemical composition of renewable energy biomass feedstock was developed by using Fourier transform near-infrared (FT-NIR) spectroscopy coupled with multivariate analysis. The study presents the broad-based model hypothesis that a single FT-NIR predictive model can be developed to analyze multiple types of biomass feedstock. The two most important biomass feedstocks corn stover and switchgrass were evaluated for the variability in their concentrations of the following components: glucan, xylan, galactan, arabinan, mannan, lignin, and ash. A hypothesis test was developed based upon these two species. Both cross-validation and independent validation results showed that the broad-based model developed is promising for future chemical prediction of both biomass species; in addition, the results also showed the method's prediction potential for wheat straw.

  13. Chemical composition and antibacterial activity of the essential oil from Pyrrosia tonkinensis (Giesenhagen) Ching.

    Science.gov (United States)

    Xin, Xiaowei; Liu, Qingshen; Zhang, Yingying; Gao, Demin

    2016-01-01

    The present study aimed to analyse the chemical components of the essential oil from Pyrrosia tonkinensis by GC-MS and evaluate the in vitro antibacterial activity. Twenty-eight compounds, representing 88.1% of the total essential oil, were identified and the major volatile components were trans-2-hexenal (22.1%), followed by nonanal (12.8%), limonene (9.6%), phytol (8.4%), 1-hexanol (3.8%), 2-furancarboxaldehyde (3.5%) and heptanal (3.1%). The antibacterial assays showed that the essential oil of P. tonkinensis had good antibacterial activities against all the tested microorganisms. This paper first reported the chemical composition and antimicrobial activity of the essential oil from P. tonkinensis.

  14. Densification mechanism of chemical vapor infiltration technology for carbon/carbon composites

    Institute of Scientific and Technical Information of China (English)

    CHEN Jian-xun; XIONG Xiang; HUANG Qi-zhong; YI Mao-zhong; HUANG Bai-yun

    2007-01-01

    Carbon/carbon composites were fabricated using pressure-gradient chemical vapor infiltration(CVI) technology with propane (C3H6) as the carbon precursor gas and nitrogen (N2) as the carrier gas. The chemical process of deposition of pyrolytic carbon was deduced by analyzing the component of molecules in gas phase and observing the microstructure of deposition carbon. The results show that the process of deposition starts from the breakdown of C-C single bond of propene (C3H6), and forms two kinds of active groups in the heterogeneous gas phase reaction. Afterwards, these active groups form many stable bigger molecules and deposit on carbon fiber surface. At the same time, hydrogen atoms of the bigger molecules absorbed on carbon fiber surface are eliminated and the solid pyrolytic carbon matrix is formed in the heterogeneous reaction process.

  15. Chemical composition and functional properties of starch extracted from the pejibaye fruit (Bactris gasepaes Kunth.

    Directory of Open Access Journals (Sweden)

    Biano Alves de Melo Neto

    2015-01-01

    Full Text Available This study aimed to establish the chemical composition and functional properties of the starch extracted from the pejibaye fruit (Bactris gasepaes Kunth.. The chemical characterization was evaluated from the determination of starch, amylose, amylopectin, total lipid, protein, ash, moisture and water activity. The water absorption index and the water solubility index were calculated for temperatures between 25 and 90ºC. Low contents of ash and protein were found. The studied starch has 14% moisture, according to the established by law. The water activity value was 0.55, which ensures its microbiological stability. A range of gelatinization between 65 to 70ºC was observed, close to the one of commercial starches. The solubility rate in water was 0.6119% and the absorption rate in water was 1.8252%. These results demonstrated that the starch from the pejibaye fruit has important characteristics for use in the food industry.

  16. Changes of Chemical Composition and Crystalline of Compressed Chinese Fir Wood in Heating Fixation

    Institute of Scientific and Technical Information of China (English)

    Tang Xiaoshu; Zhao Guangjie; Nakao Tetsuya

    2004-01-01

    The changes in relative crystalline, chemical composition and internal structure of compressed Chinese fir wood after different heating fixations were found strictly related to fixation conditions. The compressed wood powders were fixed either by heating at different temperatures all resulting in a 10% recovery, or by incubating at 180 °C for different periods with subsequent recovery levels. Both X-ray diffraction and infrared absorption of those samples have been measured. Relative crystalline increases at early stage of heating fixation, and then decreased gradually. Hemicellulose and lignin decomposition were induced by the fixation process, especially at 180 °C, and lignin was degraded actively. Furthermore, absorbed water was lost after heating, but cellulose did not change markedly. Although different fixation pathways can result in the same recovery level, the major chemical reactions underlying them vary, which is consistent with the difference of fixation mechanisms.

  17. Recent Progress of Propolis for Its Biological and Chemical Compositions and Its Botanical Origin

    Directory of Open Access Journals (Sweden)

    Viviane Cristina Toreti

    2013-01-01

    Full Text Available Propolis is the generic name given to the product obtained from resinous substances, which is gummy and balsamic and which is collected by bees from flowers, buds, and exudates of plants. It is a popular folk medicine possessing a broad spectrum of biological activities. These biological properties are related to its chemical composition and more specifically to the phenolic compounds that vary in their structure and concentration depending on the region of production, availability of sources to collect plant resins, genetic variability of the queen bee, the technique used for production, and the season in which propolis is produced. Many scientific articles are published every year in different international journal, and several groups of researchers have focused their attention on the chemical compounds and biological activity of propolis. This paper presents a review on the publications on propolis and patents of applications and biological constituents of propolis.

  18. Electrical impedance properties of carbon nanotube composite electrodes for chemical and biosensor.

    Science.gov (United States)

    So, Dae-Sup; Kang, Inpil; Huh, Hoon; Lee, Haiwon

    2010-05-01

    Electrical impedance properties of different type of carbon nanotubes based bulk electrodes have been investigated to develop chemical and biosensors. The bulk composite electrodes were fabricated with single-wall and multi-wall carbon nanotubes involving ionic conducting host polymer, Nafion, by using traditional solution-casting techniques. Under the various amounts of buffer solution, resistance and capacitance of the electrodes were measured with LCR meter and their characteristics due to ionic conducting host polymer were investigated by means of electrokinetic analysis. The capacitance values showed drastic change while the resistances only changed within few percent ranges. Electrical impedance measurement provided rapid and simple sensing mechanism to develop chemical sensor and biosensors with bulk nano electrodes.

  19. THE MINERALISATION DEGREE AND CHEMICAL COMPOSITION OF THE LAKES IN THE TRANSYLVANIAN PLAIN

    Directory of Open Access Journals (Sweden)

    Victor SOROCOVSCHI

    2009-06-01

    Full Text Available The article was compiled from the processing of chemical analysis performed on samples taken during the campaign carried out in April 2004 by members of the group of hydrology from the Faculty of Geography, Cluj-Napoca, and the results published by a small number of specialists from various areas. After analyzing the factors that determine the chemical features of Transylvanian fresh water lakes it was the degree of mineralization that distinguished lakes without leakage from the lakes with drainage. Finally, based on analysis of ionic composition of lake water we determined the specific types of lakes in Transylvania Plain, which ranged from pure magnesian bicarbonate (Cătina the prevalence of magnesium bicarbonate mixed in sulphated-magnesium bicarbonate and chloride mixed with predominance - sulfated mixed with sodium predominance.

  20. [Comparison of green coffee beans volatiles chemical composition of Hainan main area].

    Science.gov (United States)

    Hu, Rong-Suo; Chu, Zhong; Gu, Feng-Lin; Lu, Min-Quan; Lu, Shao-Fang; Wu, Gui-Ping; Tan, Le-He

    2013-02-01

    Chemical component of Hainan green coffee beans was analyzed with solid phase microextraction-gas chromatography-mass spectrometry, and the discrepancy between two green coffee beans was differentiated through the spectrum database retrieval and retention index of compound characterization. The experimental results show that: the chemical composition of Wanning coffee beans and Chengmai coffee beans is basically the same. The quantity of analyzed compound in Wanning area coffee is 91, and in Chengmai area coffee is 106, the quantity of the same compound is 66, and the percent of the same component is 75.52%. The same compounds accounted for 89.86% of the total content of Wanning area coffee, and accounted for 85.70% of the total content of Chengmai area coffee.

  1. Silica-titania composite aerogel photocatalysts by chemical liquid deposition of titania onto nanoporous silica scaffolds.

    Science.gov (United States)

    Zu, Guoqing; Shen, Jun; Wang, Wenqin; Zou, Liping; Lian, Ya; Zhang, Zhihua

    2015-03-11

    Silica-titania composite aerogels were synthesized by chemical liquid deposition of titania onto nanoporous silica scaffolds. This novel deposition process was based on chemisorption of partially hydrolyzed titanium alkoxides from solution onto silica nanoparticle surfaces and subsequent hydrolysis and condensation to afford titania nanoparticles on the silica surface. The titania is homogeneously distributed in the silica-titania composite aerogels, and the titania content can be effectively controlled by regulating the deposition cycles. The resultant composite aerogel with 15 deposition cycles possessed a high specific surface area (SSA) of 425 m(2)/g, a small particle size of 5-14 nm, and a large pore volume and pore size of 2.41 cm(3)/g and 18.1 nm, respectively, after heat treatment at 600 °C and showed high photocatalytic activity in the photodegradation of methylene blue under UV-light irradiation. Its photocatalytic activity highly depends on the deposition cycles and heat treatment. The combination of small particle size, high SSA, and enhanced crystallinity after heat treatment at 600 °C contributes to the excellent photocatalytic property of the silica-titania composite aerogel. The higher SSAs compared to those of the reported titania aerogels (aerogels promising candidates as photocatalysts.

  2. Influence of chemical treatment on the tensile properties of kenaf fiber reinforced thermoplastic polyurethane composite

    Directory of Open Access Journals (Sweden)

    Y. A. El-Shekeil

    2012-12-01

    Full Text Available In this study, the effect of polymeric Methylene Diphenyl Diisocyanate (pMDI chemical treatment on kenaf (Hibiscus cannabinus reinforced thermoplastic polyurethane (TPU/KF was examined using two different procedures. The first consisted of treating the fibers with 4% pMDI, and the second involved 2% NaOH + 4% pMDI. The composites were characterized according to their tensile properties, Fourier Transform Infrared Spectroscopy (FTIR and Scanning Electron Microscopy (SEM. The treatment of the composite with 4% pMDI did not significantly affect its tensile properties, but the treatment with 2% NaOH + 4% pMDI significantly increased the tensile properties of the composite (i.e., 30 and 42% increases in the tensile strength and modulus, respectively. FTIR also showed that treatment with 2% NaOH + 4% pMDI led to the strongest H-bonding. Additionally, the surface morphology of specimens after tensile fracture confirmed that the composite treated with 2% NaOH + 4% pMDI had the best adhesion and wettability.

  3. Analysis of the chemical composition of essential oil from Algerian Inula viscosa (L. Aiton

    Directory of Open Access Journals (Sweden)

    Imad Eddine Haoui

    2015-07-01

    Full Text Available The chemical composition of the essential oil of Inula viscosa (L. leaves, obtained by both hydrodistillation and steam distillation, was investigated by GC–MS. The major components for hydrodistillation were: 12-carboxyeudesma-3,11 (13 diene (28.88%; linolenic acid (7.80%; palmitic acid (5.38%; butyl hydroxy toluene (4.11% and fokienol (3.37%, while for steam distillation were: 12-carboxyeudesma-3,11 (13 diene (56.81%; 2,3-didehydrocostic acid (3.25%; butyl hydroxy toluene (2.63% and pentacosane (2.31%.

  4. An X-Ray Tomography Based Modeling Solution For Chemical Vapor Infiltration Of Ceramic Matrix Composites

    Science.gov (United States)

    Ros, William; Vignoles, Gérard L.; Germain, Christian

    2010-05-01

    A numerical tool for the simulation of Chemical Vapor Infiltration of carbon/carbon composites is introduced. The structure of the fibrous medium can be studied by high resolution X-Ray Computed Micro Tomography. Gas transport in various regimes is simulated by a random walk technique whilst the morphological evolution of the fluid/solid interface is handled by a Marching Cube technique. The program can be used to evaluate effective diffusivity and first order reaction rate. The numerical tool is validated by comparing computed effective properties of a straight slit pore with reactive walls to their analytical expression. Simulation of CVI processing of a real complex media is then presented.

  5. Chemical Composition and Antigerminative Activity of the Essential Oils from Five Salvia Species

    OpenAIRE

    Vincenzo De Feo; Enrica De Falco; Emilia Mancini; Graziana Roscigno; Laura De Martino

    2010-01-01

    The chemical composition of the essential oils of Salvia africana L., Salvia elegans Vahl, Salvia greggii A. Gray, Salvia mellifera Green and Salvia munzii Epling, cultivated in Eboli (Salerno, Southern Italy), was studied by means of GC and GC-MS analyses. In all, 88 compounds were identified, 54 for S. africana, accounting for 95.4% of the total oil, 55 for S. elegans (92.9%), 50 for S. greggii (96.9%), 54 for S. mellifera (90.4%) and 47 for S. munzii (97.5%), respectively. In S. africana,t...

  6. Chemical composition and antibacterial activity of the essential oil from Mentha requienii Bentham.

    Science.gov (United States)

    Chessa, Mario; Sias, Angela; Piana, Andrea; Mangano, Giuseppe Salvatore; Petretto, Giacomo Luigi; Masia, Maria Dolores; Tirillini, Bruno; Pintore, Giorgio

    2013-01-01

    The chemical composition of essential oil obtained by hydrodistillation of the fresh aerial parts of Mentha requienii Bentham (Lamiaceae) collected on the Gennargentu Mountains (Sardinia, Italy) has been investigated by gas chromatography and gas chromatography-mass spectrometry. The main constituents that resulted were pulegone (78%), menthone (0.5%), isomenthone (18%), isopulegone (1.3%) and limonene (1.76%). In vitro antifungal activity is evaluated in order to identify new means that could be helpful in the prevention of contamination in indoor environments.

  7. RESEARCH ON CHEMICAL COMPOSITION AND MICROSTRUCTURE OF NEWLY-DEVELOPED HIGH STRENGTH AND HIGH ELONGATION STEELS

    Institute of Scientific and Technical Information of China (English)

    Y. Chen; X. Chen; A.M. Guo; D.X. Luo; B.F. Xu; Z.X. Yuan; P.H. Li; S.K. Pu; S.B. Zhou

    2003-01-01

    The different chemical composition of silicon and manganese as well as different re-tained austenite fraction ranged from 4% to 10% of the high strength and high elon-gation steels were studied in the paper. The dislocations and carbon concentrationin retained austenite were observed by a transmission electron microscope and anelectric probe analyzer, respectively. The experimental results showed that silicon andmanganese are two fundamental alloying elements to stabilize austenite effectively butretaining austenite in different mechanisms. Meanwhile, the cooling processing playedan important role in controlling the fraction of retained austenite of the hot-rolledhigh strength and high plasticity steels.

  8. Assessment of Water and Sediment Physical-Chemical Composition in the West Coast of Maracaibo Lake

    Directory of Open Access Journals (Sweden)

    Jorge Moronta-Riera

    2016-05-01

    Full Text Available The objective of this investigation was to determine the physical and chemical composition of the water streams and sediments of the Maracaibo Lake in three sampling areas located in Tía Juana, Lagunillas and Ceuta in order to know the level of contamination and assess water quality based on permissible values established by the 883 Decree. The results indicate that the overall hydrocarbon concentrations in the water and sediments are above permissible levels. It is concluded that petroleum prospection is the root cause of the lake contamination.

  9. The biological activities and chemical composition of Pereskia species (Cactaceae)--a review.

    Science.gov (United States)

    Pinto, Nícolas de Castro Campos; Scio, Elita

    2014-09-01

    The exploration of nature as a source of sustainable, novel bioactive substances continues to grow as natural products play a significant role in the search for new therapeutic and agricultural agents. In this context, plants of the genus Pereskia (Cactaceae) have been studied for their biological activities, and are evolving as an interesting subject in the search for new, bioactive compounds. These species are commonly used as human foodstuffs and in traditional medicine to treat a variety of diseases. This review focuses on the bioactivity and chemical composition of the genus Pereskia, and aims to stimulate further studies on the chemistry and biological potential of the genus.

  10. Chemical composition and possible in vitro phytotoxic activity of Helichrsyum italicum (Roth) Don ssp. italicum.

    Science.gov (United States)

    Mancini, Emilia; De Martino, Laura; Marandino, Aurelio; Scognamiglio, Maria Rosa; De Feo, Vincenzo

    2011-09-08

    The chemical composition of the essential oil of Helichrysum italicum (Roth) Don ssp. italicum, collected in the National Park of Cilento and Diano Valley, Southern Italy, was studied by means of GC and GC/MS. Forty four compounds of 45 constituents were identified in the oil, mainly oxygenated sesquiterpenes. The essential oil was evaluated for its potential in vitro phytotoxic activity against germination and early radicle elongation of radish and garden cress. The radicle elongation of radish was significantly inhibited at the highest doses tested, while germination of both seeds was not affected.

  11. The influence of vegetation fires on the chemical composition of the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Helas, H.; Pienaar, J.J. [Max Planck Institute of Chemistry, Mainz (Germany). Biogeochemistry Dept.

    1996-03-01

    The authors discuss the influence of vegetation fires on the chemical composition of the atmosphere and compare the contribution of these fires to atmospheric pollution with other natural and anthropogenic sources. In the case of South Africa, the comparison shows that for CO{sub 2}, NO{sub x} and SO{sub 2}, industrial coal use is the largest contributor whereas for CO and CH{sub 4}, vegetation fires contribute the most. As a source of atmospheric NO{sub x} motor vehicles are more important than emissions from veld fires.

  12. Chemical compositions of siderophile element-rich opaque assemblages in an Allende inclusion

    Science.gov (United States)

    Sylvester, Paul J.; Ward, Brian J.; Grossman, Lawrence; Hutcheon, Ian D.

    1990-01-01

    Chemical compositions of ten opaque assemblages, or Fremdlinge, from an Allende Type B Ca-,Al-rich coarse-grained inclusion were determined. Attempts to model the abundances of refractory siderophiles assuming condensation from the solar nebula into a single phase failed to match the observed combination of subchondritic Re/Os and Ir/Pt ratios. However, virtually all refractory siderophile fractionations in these Fremdlinge could be matched by a different model, in which all metals condensed into three separate alloys according to their crystal structures.

  13. [Chemical composition and immunochemical characteristics of the lipopolysaccharide of nitrogen-fixing rhizobacterium Azospirillum brasilense CD].

    Science.gov (United States)

    Konnova, O N; Burygin, G L; Fedonenko, Iu P; Matora, L Iu; Pankin, K E; Konnova, S A; Ignatov, V V

    2006-01-01

    The chemical composition of the lipopolysaccharide of the associative diazotrophic rhizobacterium Azospirillum brasilense Cd has been studied. Among the main components of the hydrophobic part of the lipopolysaccharide, we identified 3-hydroxytetradecanoic, hexadecenoic, 3-hydroxyhexadecanoic, hexadecanoic, octadecenoic, and nanodecanoic fatty acids; the carbohydrate part contained rhamnose, galactose, and mannose. Polyclonal antibodies against the preparation under study were raised in rabbits. Serological relations between A. brasilense Cd and other strains of Azospirillum spp. were studied using double radial immunodiffusion and enzyme-linked immunosorbent assay.

  14. Effect of stainless steel chemical composition on brazing ability of filler metal

    Science.gov (United States)

    Miyazawa, Yasuyuki; Ohta, Kei; Nishiyama, Akira

    2014-08-01

    Many kinds of stainless steel have been used in the engineering field. So it is necessary to investigate the effect of SUS chemical compositions on the brazing ability of filler metal. In this study, SUS315J containing Cr, Ni, Si, Cu, and Mo was employed as a base metal. Excellent spreading ability of the molten nickel-based brazing filler on SUS315J was obtained as compared with that on SUS316. Copper and silicon influenced the significant spreading ability of the filler.

  15. African peppermint (Mentha piperita) from Morocco: Chemical composition and antimicrobial properties of essential oil.

    Science.gov (United States)

    Marwa, Chraibi; Fikri-Benbrahim, Kawtar; Ou-Yahia, Douae; Farah, Abdellah

    2017-01-01

    To replace and avoid synthetic chemicals toxicity, there is a growing interest in the investigation of natural products from plant origin for the discovery of active compounds with antimicrobial properties. This work was devoted to determine chemical composition and antimicrobial properties of the EO of M. piperita harvested in the garden of the National Institute of Medicinal and Aromatic Plants of Morocco. Experiments have been conducted at the Microbial Biotechnology Laboratory at the Sciences and Technology Faculty, Sidi Mohamed Ben Abdellah University, Fez, Morocco. M. piperita oil was screened for its antimicrobial activity against seven bacteria and two fungi using broth microdilution method. Chemical EO analysis was performed using CPG/MS. The EO revealed menthol (46.32%), menthofuran (13.18%), menthyl acetate (12.10%), menthone (7.42%), and 1,8-cineole (6.06%) as the main constituents. The tested EO exhibited strong inhibitory effect against all tested microorganisms with minimum inhibitory concentrations ranging from 0.062% to 0.5% (v/v), except for Pseudomonas aeruginosa that was the least sensitive and was only inhibited by concentrations as high as 0.5% (v/v). The studied EO showed an antimicrobial potential. This reinforces its use as an alternative to chemical additives that can be applied to the food and drug industry.

  16. African peppermint (Mentha piperita from Morocco: Chemical composition and antimicrobial properties of essential oil

    Directory of Open Access Journals (Sweden)

    Chraibi Marwa

    2017-01-01

    Full Text Available To replace and avoid synthetic chemicals toxicity, there is a growing interest in the investigation of natural products from plant origin for the discovery of active compounds with antimicrobial properties. This work was devoted to determine chemical composition and antimicrobial properties of the EO of M. piperita harvested in the garden of the National Institute of Medicinal and Aromatic Plants of Morocco. Experiments have been conducted at the Microbial Biotechnology Laboratory at the Sciences and Technology Faculty, Sidi Mohamed Ben Abdellah University, Fez, Morocco. M. piperita oil was screened for its antimicrobial activity against seven bacteria and two fungi using broth microdilution method. Chemical EO analysis was performed using CPG/MS. The EO revealed menthol (46.32%, menthofuran (13.18%, menthyl acetate (12.10%, menthone (7.42%, and 1,8-cineole (6.06% as the main constituents. The tested EO exhibited strong inhibitory effect against all tested microorganisms with minimum inhibitory concentrations ranging from 0.062% to 0.5% (v/v, except for Pseudomonas aeruginosa that was the least sensitive and was only inhibited by concentrations as high as 0.5% (v/v. The studied EO showed an antimicrobial potential. This reinforces its use as an alternative to chemical additives that can be applied to the food and drug industry.

  17. The chemical compositions of solar twins in the open cluster M67

    CERN Document Server

    Liu, F; Yong, D; Melendez, J; Ramirez, I; Karakas, A I; Carlos, M; Marino, A F

    2016-01-01

    Stars in open clusters are expected to share an identical abundance pattern. Establishing the level of chemical homogeneity in a given open cluster deserves further study as it is the basis of the concept of chemical tagging to unravel the history of the Milky Way. M67 is particularly interesting given its solar metallicity and age as well as being a dense cluster environment. We conducted a strictly line-by-line differential chemical abundance analysis of two solar twins in M67: M67-1194 and M67-1315. Stellar atmospheric parameters and elemental abundances were obtained with high precision using Keck/HIRES spectra. M67-1194 is essentially identical to the Sun in terms of its stellar parameters. M67-1315 is warmer than M67-1194 by ~ 150 K as well as slightly more metal-poor than M67-1194 by ~ 0.05 dex. M67-1194 is also found to have identical chemical composition to the Sun, confirming its solar twin nature. The abundance ratios [X/Fe] of M67-1315 are similar to the solar abundances for elements with atomic n...

  18. Changes blood protein composition under experimental chemical burns of esophageal development in rats

    Directory of Open Access Journals (Sweden)

    T.V. Ishchuk

    2015-04-01

    Full Text Available Exogenous poisoning with alkalis takes the leading position among causes of acute poisoning. Esophageal burns as a result of accidental swallowing of caustic material are seen frequently in children ages 1 to 8 years. A burn wound is perhaps the most intense stress that a human body can suffer. In the place of chemical trauma localization the processes of synthesis and degradation of proteins increase. As a result the structure and functions of vital organs and immune system suffer. The inflammation process after burn injury is determines the changes in protein expression. In our research we have shown that chemical burn of the esophagus is characterized by decreased level of total proteolytic activity, total protein and development of endogenous intoxication of the body as indicated by elevated MMM level. Obtained results suggest that the development of chemical burns of the esophagus grade 2 is characterized by more substantial changes in the protein composition of blood compared with grade 1. An in-depth study of this disease has a crucial scientific and practical importance for development of pathogenically oriented methods of wound process healing after the chemical esophageal burns depending on the stage and extent of the burn process. [Biomed Res Ther 2015; 2(4.000: 241-249

  19. A study on natural and anthropogenic changes of chemical compositions in the Nakdong river in Korea

    Science.gov (United States)

    Kim, J.; Choi, H. B.; Choi, U. K.; Lee, J.

    2016-12-01

    The Nakdong river is the longest river in South Korea and about sixty metalliferous mines have been operated since the 1930s. So, the environmental issues have occurred due to mine tailings, which were derived from mining activities located in the basin. In this study, thirty three river samples were collected from branches affected by tailings of each eleven-mine and main stream that meets the branches. Field parameters were measured in situ and major cations, anions, trace elements and water isotopes were determined at the Korea Basic Science Institute. The purpose of this study was, thus, to evaluate whether the mines positioned upper catchment affect on chemical variations of the Nakdong river where bedrocks mostly consist of quartize. Most water samples that dominantly were influenced by chemical weathering are on a weathering line [HCO3+2 SO4 : 2 (Ca + Mg) = 1:1]. However, six samples have shown excess sulfate that were below the 1:1 line and these samples were mostly from the streams around the Seokpo refinery and Sambo mine branch, which were consistent with the results by principle component analysis (PCA). Also, three samples near farmlands can be separated into a group by PCA because of high concentrations of nitrate. Based on the chemical and PCA results, we believe that the chemical compositions of the river have been affected by the mine tailings and agricultural contaminants. However, it is necessary to understand how the contaminants were derived from other inputs, such as synthetic fertilizer, soil, and atmospheric deposition.

  20. [Investigation on correlation between ratio of xylem to phloem of Radix Isatidis and efficacy, chemical composition].

    Science.gov (United States)

    Yan, Dan; Han, Yu-mei; Luo, Jiao-yang; Yan, Yan; Zhang, Ping; Zhang, Shao-feng; Xiao, Xiao-he

    2011-01-01

    Explore contribution of ratio of xylem to phloem(RXP) to evaluate the quality of Radix Isatidis. Antivirus activity and chemical compositions of xylem, phloem and Radix Isatidis of different RXP were determined by RBC agglutination test and unique chromatogram. Meanwhile, correlation between RXP and bioactivity,components was investigated. the activity of medical material of Radix Isatidis whose RXP was 1:2 or 1:1 is equal to that of phloem sample, while is stronger than that of cylem sample. There was a good consistency among the chemical figureprints of three samples (Radix Isatidis, xylem and phloem). When the RXP was 2:1, the medical material of Radix Isatidi and its xylem had the same activity. But the activity of phloem was not obvious. Their consistency of chemical fingerprint was bad, and the activity of Radix Isatidis which had RXP of 1:2 or 1:1 was better than that formed by xylem and phloem of 2:1. The Radix Isatidis of RXP of 1:2 or 1:1 had less similarity of chemical figureprint with that having RXP of 2:1. The quality of Radix Isatidis made up by the various RXP had significant difference. Radix Isatidis whose RXP is less than 1:1 had good quality and better activity. As a characteristic parameter of biologic morpha, the RXP can be applied to identifying the quality of Radix Isatidis, and also provided a reference to evaluation of other medical material of roots.

  1. ON THE MORPHOLOGY AND CHEMICAL COMPOSITION OF THE HR 4796A DEBRIS DISK

    Energy Technology Data Exchange (ETDEWEB)

    Rodigas, Timothy J.; Weinberger, Alycia [Department of Terrestrial Magnetism, Carnegie Institution of Washington, 5241 Broad Branch Road, NW, Washington, DC 20015 (United States); Stark, Christopher C. [NASA Goddard Space Flight Center, Exoplanets and Stellar Astrophysics Laboratory, Code 667, Greenbelt, MD 20771 (United States); Debes, John H.; Chen, Christine [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Hinz, Philip M.; Close, Laird; Smith, Paul S.; Males, Jared R.; Skemer, Andrew J.; Follette, Katherine B.; Morzinski, Katie; Wu, Ya-Lin; Schneider, Glenn [Steward Observatory, The University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States); Puglisi, Alfio; Briguglio, Runa; Esposito, Simone; Pinna, Enrico; Riccardi, Armando; Xompero, Marco, E-mail: trodigas@carnegiescience.edu [INAF-Osservatorio Astrofisico di Arcetri, Largo E. Fermi 5, I-50125, Firenze (Italy)

    2015-01-10

    We present resolved images of the HR 4796A debris disk using the Magellan adaptive optics system paired with Clio-2 and VisAO. We detect the disk at 0.77 μm, 0.91 μm, 0.99 μm, 2.15 μm, 3.1 μm, 3.3 μm, and 3.8 μm. We find that the deprojected center of the ring is offset from the star by 4.76 ± 1.6 AU and that the deprojected eccentricity is 0.06 ± 0.02, in general agreement with previous studies. We find that the average width of the ring is 14{sub −2}{sup +3}% (11.1{sub −1.6}{sup +2.4} AU), also comparable to previous measurements. Combining our new scattered light data with archival Hubble Space Telescope images at ∼0.5-2 μm, along with previously unpublished Spitzer/MIPS thermal emission data and all other literature thermal data, we set out to constrain the chemical composition of the dust grains. After testing 19 individual root compositions and more than 8400 unique mixtures of these compositions, we find that good fits to the scattered light alone and thermal emission alone are discrepant, suggesting that caution should be exercised if fitting to only one or the other. When we fit to both data sets simultaneously, we find that silicates and organics are generally the most favored, while large abundances of water ice are usually not favored. These results suggest the HR 4796A dust grains are similar to interstellar dust and solar system comets, though improved modeling is necessary to place better constraints on the exact chemical composition of the dust.

  2. Evaluation of beetroot (Beta vulgaris L. leaves during its developmental stages: a chemical composition study

    Directory of Open Access Journals (Sweden)

    Polyana Batoqui França Biondo

    2014-03-01

    Full Text Available Beetroot leaves (Beta vulgaris L. are commonly cut off and discarded before using its bulb due to lack of knowledge of how to use them. Aiming at using these leaves, in the present study, in natura and dehydrated beetroot leaves were chemically characterized in terms of fatty acid composition, proximate composition, minerals, total phenolic compounds (TPC, and antioxidant activity by DPPH• in different stages (60, 80, and 100 days of development. The beetroot leaves showed significant levels of protein and lipids in all developmental stages, and all proximate composition nutrients decreased during these maturation stages; the highest content was observed at 60 days. The Fe content decreased during the developmental stages (from 342.75 to 246.30 mg.kg-1, while the content of K increased (from 13,367.64 to 20,784.90 mg.kg-1. With regard to to fatty acid composition, linolenic acid was present in the greatest quantity, and it increase up to 2.58 mg.g-1 (in natura and 40.11 mg.g-1 (dehydrated at 100 days of development. The n-6/n-3 ratios were low in all stages. The TPC and antioxidant activity by DPPH• changed during the developmental stages. The TPC was highest in the 100-day dehydrated leaves (15.27±0.12 mg GAE.g-1 FW, and the 50% inhibition of DPPH• (IC50 89.52 µg.mL-1 were better in the 60-day in natura leaves. This study shows that all developmental stages produced satisfactory results, and therefore, these leaves can be reused as food. The antioxidant activity and the chemical constituents, mainly the ω-3fatty acid, increased during the stages of development.

  3. Influence of mineral and chemical composition of coal ashes on their fusibility

    Energy Technology Data Exchange (ETDEWEB)

    Vassilev, S.V.; Kitano, K.; Takeda, S.; Tsurue, T. [Bulgarian Academy of Sciences, Sofia (Bulgaria). Institute of Applied Mineralogy

    1995-10-01

    The relationships between ash-fusion temperature (AFT) and mineral and chemical composition of coals and coal ashes from a wide variety of deposits (41) were studied by a melting test, X-ray diffractometry, light microscopy, differential-thermal, thermogravimetric and chemical analyses. A reliable explanation and prediction of AFT only from the total chemical composition of coal ash is inadequate because most important are the modes of elemental combination (minerals and phases) in coal and coal ash, as well as their behaviour during heating. The coals, which have low-melting temperature ashes, are lower rank coals with increased concentrations of S, Ca, Mg, Fe and Na and respectively, sulphates, carbonates, sulphides, oxides, montmorillonite, and feldspars. The coals with high-melting temperature ashes have an advanced rank and increased contents of Si, Al and Ti and respectively, quartz, kaolinite, illite and rutile, as well as some Fe oxides and siderite. The behaviour of chemical components and various coal and coal-ash minerals during heating is discussed, and their refractory and fluxing influence on ash fusibility is described. Lower AFT is related to increased proportions of the fluxing sulphate, silicate and oxide minerals such as anhydrite, acid plagioclases, K feldspars, Ca silicates and hematite in high-temperature coal ashes. Higher AFT is a result of decreased fluxing minerals and increased refractory minerals such as quartz, metakaolinite, mullite, and rutile in these ashes. Defined softening, hemispherical and fluid ash-fusion temperatures fit various processes of inorganic transformations which are discussed. A reliable explanation and prediction of ash-fusion characteristics can be made when the coal and coal-ash minerals and their amounts, as well as their refractory and fluxing action during heating, are known. 31 refs., 7 figs., 5 tabs.

  4. Effects of thermal treatments on chemical composition and electrical properties of ultra-thin Lu oxide layers on Si

    NARCIS (Netherlands)

    Zenkevich, A.; Lebedinskii, Yu.; Spiga, S.; Wiemer, C.; Scarel, G.; Fanciulli, M.

    2007-01-01

    The correlation between chemical composition, layered structure evolution, and electrical properties of ultra-thin (2-5 nm) Lu oxide layers grown on chemically oxidized Si(100) and exposed to different thermal treatments was monitored by x-ray photoelectron spectroscopy, x-ray reflectivity and C-V,

  5. Estimation of aerosol water and chemical composition from AERONET at Cabauw, the Netherlands, Atmos. Chem. Phys. Discuss., 13, ,

    NARCIS (Netherlands)

    Beelen, A.J. van; Roelofs, G.J.H.; Hasekamp, O.P.; Henzing, J.S.; Röckmann, T.

    2013-01-01

    This study is of our particular interest as the quality of our chemical transport model Lotos-Euros can be improved by our understanding of the aerosol-light interaction. In this study we derive aerosol water and chemical composition by a modeling approach that combines in situ measured and remotely

  6. CHEMICAL COMPOSITION AND PCT DATA FOR THE INITIAL SET OF HANFORD ENHANCED WASTE LOADING GLASSES

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.; Edwards, T.

    2014-06-02

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test results for 20 simulated high level waste glasses fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation ranges of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions. The measured chemical composition data are reported and compared with the targeted values for each component for each glass. Two components of the study glasses, fluorine and silver, were not measured since each of these species would have required the use of an additional preparation method and their measured values were likely to be near or below analytical detection limits. Some of the glasses were difficult to prepare for chemical analysis. A sodium peroxide fusion dissolution method was successful in completely dissolving the glasses. Components present in the glasses in minor concentrations can be difficult to measure using this dissolution method due to dilution requirements. The use of a lithium metaborate preparation method for the minor components (planned for use since it is typically successful in digesting Defense Waste Processing Facility HLW glasses) resulted in an unacceptable amount of undissolved solids remaining in the sample solutions. An acid dissolution method was used instead, which provided more thorough dissolution of the glasses, although a small amount of undissolved material remained for some of the study glasses. The undissolved material was analyzed to determine those components of the glasses that did not fully dissolve. These components (e.g., calcium and chromium) were present in sufficient quantities to be reported from the measurements resulting from the sodium peroxide fusion preparation method, which did not leave undissolved material. Overall, the analyses resulted in sums of

  7. Thermodynamic Modeling of the Chemical Composition of Calcine at the Idaho Nuclear Technology and Engineering Center

    Energy Technology Data Exchange (ETDEWEB)

    C. M. Frazee; J. D. Christian

    2004-02-01

    To send calcine produced at Idaho National Engineering and Environmental Laboratory to the Yucca Mountain Project for disposal, characterization information will be required. To sample calcine from its existing storage location would require extensive personnel exposure. Sufficient analyses of the chemical composition of the calcine would be extremely difficult and very expensive. In support of characterization development, the chemical composition of calcine from Bin 3 of Calcine Solid Storage Facility II was thermodynamic modeled. This calcine was produced in the Waste Calcination Facility during its second processing campaign, operating with indirect heating at 400 C and 0.744 bar (0.734 atm) during processing of aluminum high-level liquid waste (first cycle extraction raffinate from reprocessing aluminum-clad fuels) from tanks WM-180 and -182 from December 27, 1966 through August 26, 1967. The current modeling effort documents the input compositional data (liquid feed and calciner off-gas) for Batches 300 - 620 and a methodology for estimating the calcine chemical composition. The results, along with assumptions and limitations of the thermodynamic calculations, will serve as a basis for benchmarking subsequent calculations. This will be done by comparing the predictions against extensive analytical results that are currently being obtained on representative samples of the modeled calcine. A commercial free-energy minimization program and database, HSC 5.1, was used to perform the thermodynamic calculations. Currently available experimental data and process information on the calcine were used to make judgments about specific phases and compounds to include and eliminate in the thermodynamic calculations. Some off-gas species were eliminated based on kinetics restrictions evidenced by experimental data and other estimates, and some calcine components and off-gas compounds were eliminated as improbable species (unreliable thermodynamic data). The current Yucca

  8. CHEMICAL COMPOSITION AND PCT DATA FOR THE INITIAL SET OF HANFORD ENHANCED WASTE LOADING GLASSES

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.; Edwards, T.

    2014-06-02

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test results for 20 simulated high level waste glasses fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation ranges of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions. The measured chemical composition data are reported and compared with the targeted values for each component for each glass. Two components of the study glasses, fluorine and silver, were not measured since each of these species would have required the use of an additional preparation method and their measured values were likely to be near or below analytical detection limits. Some of the glasses were difficult to prepare for chemical analysis. A sodium peroxide fusion dissolution method was successful in completely dissolving the glasses. Components present in the glasses in minor concentrations can be difficult to measure using this dissolution method due to dilution requirements. The use of a lithium metaborate preparation method for the minor components (planned for use since it is typically successful in digesting Defense Waste Processing Facility HLW glasses) resulted in an unacceptable amount of undissolved solids remaining in the sample solutions. An acid dissolution method was used instead, which provided more thorough dissolution of the glasses, although a small amount of undissolved material remained for some of the study glasses. The undissolved material was analyzed to determine those components of the glasses that did not fully dissolve. These components (e.g., calcium and chromium) were present in sufficient quantities to be reported from the measurements resulting from the sodium peroxide fusion preparation method, which did not leave undissolved material. Overall, the analyses resulted in sums of

  9. Laser-based mass spectrometry for in situ chemical composition analysis of planetary surfaces

    Science.gov (United States)

    Frey, Samira; Neuland, Maike B.; Grimaudo, Valentine; Moreno-García, Pavel; Riedo, Andreas; Tulej, Marek; Broekmann, Peter; Wurz, Peter

    2016-04-01

    Mass spectrometry is an important analytical technique in space research. The chemical composition of planetary surface material is a key scientific question on every space mission to a planet, moon or asteroid. Chemical composition measurements of rocky material on the surface are of great importance to understand the origin and evolution of the planetary body.[1] A miniature laser ablation/ionisation reflectron- type time-of-flight mass spectrometer (instrument name LMS) was designed and built at the University of Bern for planetary research.[2] Despite its small size and light weight, the LMS instrument still maintains the same capabilities as large laboratory systems, which makes it suitable for its application on planetary space missions.[3-5] The high dynamic range of about eight orders of magnitude, high lateral (μm-level) and vertical (sub-nm level) resolution and high detection sensitivity for almost all elements (10 ppb, atomic fraction) make LMS a versatile instrument for various applications. LMS is a suitable instrument for in situ measurements of elemental and isotope composition with high precision and accuracy. Measurements of Pb- isotope abundances can be used for dating of planetary material. Measurements of bio-relevant elements allow searching for past or present life on a planetary surface. The high spatial resolution, both in lateral and vertical direction, is of considerable interest, e.g. for analysis of inhomogeneous, extraterrestrial samples as well as weathering processes of planetary material. References [1] P. Wurz, D. Abplanalp, M. Tulej, M. Iakovleva, V.A. Fernandes, A. Chumikov, and G. Managadze, "Mass Spectrometric Analysis in Planetary Science: Investigation of the Surface and the Atmosphere", Sol. Sys. Res., 2012, 46, 408. [2] U. Rohner, J.A. Whitby, P. Wurz, "A miniature laser ablation time of flight mass spectrometer for in situ planetary exploration" Meas. Sci. Tch., 2003, 14, 2159. [3] M. Tulej, A. Riedo, M.B. Neuland, S

  10. Evaluation of gross radioactivity in foodstuffs

    Energy Technology Data Exchange (ETDEWEB)

    Zorer, Oezlem Selcuk; Oeter, Cigdem [Yuzuncu Yil Univ., Van (Turkey). Dept. of Chemistry

    2015-05-15

    The paper presents the results of radiological investigations of food products sampled in the summer and fall of 2011 and 2012 in different parts of Van, Turkey. Gross radioactivity measurements in food products were evaluated. Food items were divided into eight groups: (1) water, (2) fish, (3) cheese products, (4) fruits, (5) vegetables, (6) herbs, (7) walnut and (8) rock salt. The levels of the gross alpha and gross beta radioactivity in all food samples varied widely ranging from 0.070 to 10.885 Bq/g and from 0.132 to 48.285 Bq/g on dry mass basis, respectively. In one sample, gross alpha and gross beta activity concentrations were found to be relatively high according to the other samples and in all samples, the gross alpha radioactivity was measured lower than the gross beta radioactivity. The gross α and gross β activities were measured by using α/β counter of the multi-detector low background system (PIC MPC-9604).

  11. CCN frequency distributions and aerosol chemical composition from long-term observations at European ACTRIS supersites

    Science.gov (United States)

    Decesari, Stefano; Rinaldi, Matteo; Schmale, Julia Yvonne; Gysel, Martin; Fröhlich, Roman; Poulain, Laurent; Henning, Silvia; Stratmann, Frank; Facchini, Maria Cristina

    2016-04-01

    Cloud droplet number concentration is regulated by the availability of aerosol acting as cloud condensation nuclei (CCN). Predicting the air concentrations of CCN involves knowledge of all physical and chemical processes that contribute to shape the particle size distribution and determine aerosol hygroscopicity. The relevance of specific atmospheric processes (e.g., nucleation, coagulation, condensation of secondary organic and inorganic aerosol, etc.) is time- and site-dependent, therefore the availability of long-term, time-resolved aerosol observations at locations representative of diverse environments is strategic for the validation of state-of-the-art chemical transport models suited to predict CCN concentrations. We focused on long-term (year-long) datasets of CCN and of aerosol composition data including black carbon, and inorganic as well as organic compounds from the Aerosol Chemical Speciation Monitor (ACSM) at selected ACTRIS supersites (http://www.actris.eu/). We discuss here the joint frequency distribution of CCN levels and of aerosol chemical components concentrations for two stations: an alpine site (Jungfraujoch, CH) and a central European rural site (Melpitz, DE). The CCN frequency distributions at Jungfraujoch are broad and generally correlated with the distributions of the concentrations of aerosol chemical components (e.g., high CCN concentrations are most frequently found for high organic matter or black carbon concentrations, and vice versa), which can be explained as an effect of the strong seasonality in the aerosol characteristics at the mountain site. The CCN frequency distributions in Melpitz show a much weaker overlap with the distributions of BC concentrations or other chemical compounds. However, especially at high CCN concentration levels, a statistical correlation with organic matter (OM) concentration can be observed. For instance, the number of CCN (with particle diameter between 20 and 250 nm) at a supersaturation of 0.7% is

  12. Advanced surface chemical analysis of continuously manufactured drug loaded composite pellets.

    Science.gov (United States)

    Hossain, Akter; Nandi, Uttom; Fule, Ritesh; Nokhodchi, Ali; Maniruzzaman, Mohammed

    2017-04-15

    The aim of the present study was to develop and characterise polymeric composite pellets by means of continuous melt extrusion techniques. Powder blends of a steroid hormone (SH) as a model drug and either ethyl cellulose (EC N10 and EC P7 grades) or hydroxypropyl methylcellulose (HPMC AS grade) as polymeric carrier were extruded using a Pharma 11mm twin screw extruder in a continuous mode of operation to manufacture extruded composite pellets of 1mm length. Molecular modelling study using commercial Gaussian 09 software outlined a possible drug-polymer interaction in the molecular level to develop solid dispersions of the drug in the pellets. Solid-state analysis conducted via a differential scanning calorimetry (DSC), hot stage microscopy (HSM) and X-ray powder diffraction (XRPD) analyses revealed the amorphous state of the drug in the polymer matrices. Surface analysis using SEM/energy dispersive X-ray (EDX) of the produced pellets arguably showed a homogenous distribution of the C and O atoms in the pellet matrices. Moreover, advanced chemical surface analysis conducted via atomic force microscopy (AFM) showed a homogenous phase system having the drug molecule dispersed onto the amorphous matrices while Raman mapping confirmed the homogenous single-phase drug distribution in the manufactured composite pellets. Such composite pellets are expected to deliver multidisciplinary applications in drug delivery and medical sciences by e.g. modifying drug solubility/dissolutions or stabilizing the unstable drug (e.g. hormone, protein) in the composite network. Copyright © 2016. Published by Elsevier Inc.

  13. Chemical composition of volatiles in Sardinian myrtle (Myrtus communis L.) alcoholic extracts and essential oils.

    Science.gov (United States)

    Tuberoso, Carlo I G; Barra, Andrea; Angioni, Alberto; Sarritzu, Erika; Pirisi, Filippo M

    2006-02-22

    The chemical composition of the volatile fraction of myrtle (Myrtus communis L.) alcoholic extracts and essential oils from leaves and berries collected in different places in Sardinia (Italy) was studied. A simple and rapid liquid-liquid extraction method was used to isolate volatile compounds from myrtle alcoholic extracts followed by GC and GC-MS analysis allowing the detection of 24 compounds. The volatile fraction was characterized by the terpenes fraction corresponding to that of the essential oils and by a fatty acid ethyl esters fraction. The variation during extraction of the volatile fraction in alcoholic extracts of berries and leaves was evaluated. Essential oils were obtained by hydrodistillation, and the yields were on average 0.52 +/- 0.03% (v/w dried weight) and 0.02 +/- 0.00% for leaves and berries, respectively. The essential oils were analyzed by GC and GC-MS, and a total of 27 components were detected, accounting for 90.6-98.7% of the total essential oil composition. Strong chemical variability depending on the origin of the samples was observed. The major compounds in the essential oils were alpha-pinene (30.0 and 28.5%), 1,8-cineole (28.8 and 15.3%), and limonene (17.5 and 24.1%) in leaves and berries, respectively, and were characterized by the lack of myrtenyl acetate.

  14. Chemical compositions of Cinnamomum tamala oil from two different regions of India

    Directory of Open Access Journals (Sweden)

    Suresh Kumar

    2012-10-01

    Full Text Available Objective: This study was made to investigate the chemical composition of Cinnamomum tamala, (Buch.-Ham. Nees & Eberm (Tejpat oil (CTO which was taken from two different regions. The plant leaves were collected from two different regions of India (Southern India and Northern India. Methods: The chemical composition of the hydro distilled essential oil of Cinnamomum tamala were analyzed by Gas chromatography-mass spectrometry (GC-MS. Results: The GCMS analysis of the oil collected from northern region (Chandigarh Botanical garden, Chandigarh showed 20 constituents of which methyl eugenol (46.65%, eugenol (26.70%, trans-cinnamyl acetate (12.48% and Beta-Caryophyllene (6.26% were found the major components. The GC-MS analysis of the oil collected from southern area showed 31 constituents of which cinnamaldehyde (44.898%, Tans-cinnamyl acetate (25.327% and Ascabin (1 5.249% were found the major components. Conclusions: The oil is used in various preparations in pharmaceutical industries so it should be used after the verifications of quality of the oil. The difference observed in the amount and type of constituents may be due to the geographical origin of the plant.

  15. Seasonal Variation, Chemical Composition and Antioxidant Activity of Brazilian Propolis Samples

    Directory of Open Access Journals (Sweden)

    Érica Weinstein Teixeira

    2010-01-01

    Full Text Available Total phenolic contents, antioxidant activity and chemical composition of propolis samples from three localities of Minas Gerais state (southeast Brazil were determined. Total phenolic contents were determined by the Folin–Ciocalteau method, antioxidant activity was evaluated by DPPH, using BHT as reference, and chemical composition was analyzed by GC/MS. Propolis from Itapecerica and Paula Cândido municipalities were found to have high phenolic contents and pronounced antioxidant activity. From these extracts, 40 substances were identified, among them were simple phenylpropanoids, prenylated phenylpropanoids, sesqui- and diterpenoids. Quantitatively, the main constituent of both samples was allyl-3-prenylcinnamic acid. A sample from Virginópolis municipality had no detectable phenolic substances and contained mainly triterpenoids, the main constituents being α- and β-amyrins. Methanolic extracts from Itapecerica and Paula Cândido exhibited pronounced scavenging activity towards DPPH, indistinguishable from BHT activity. However, extracts from Virginópolis sample exhibited no antioxidant activity. Total phenolic substances, GC/MS analyses and antioxidant activity of samples from Itapecerica collected monthly over a period of 1 year revealed considerable variation. No correlation was observed between antioxidant activity and either total phenolic contents or contents of artepillin C and other phenolic substances, as assayed by CG/MS analysis.

  16. The chemical composition of the cosmic radiation around the ankle and the related spectral indices

    CERN Document Server

    Codino, Antonio

    2009-01-01

    Some recent measurements of the chemical composition of the cosmic radiation indicate that at the energy of 3 x 10 **18 eV, around the ankle, light cosmic ions dominate the spectrum as it occurs in the preknee energy region. Taking advantage of a recent theory of cosmic radiation which provides a quantitative explanation of the knee, the second knee and the ankle, the chemical composition of cosmic radiation is explicitly calculated giving individual ion spectra and ion fractions from 10 ** 12 eV to 5 x 10 ** 19 eV. The calculation assumes two components of the cosmic radiation feeding the ion flux at Earth: one originated in the disc volume and another one, called extradisc component, which from the disc boundaries traverses the Galaxy reaching the solar system. Data above 10 ** 17 eV collected during half century of experimentation by Auger, HiRes, Agasa, Akeno, Fly' s Eye, Yakutsk, Haverah Park and Volcano Ranch experiments are reviewed, examined and compared with the theoretical . The comparison between c...

  17. Effect of chemical composition and density of the pelvic structure in intracavitary brachytherapy dosimetry

    Science.gov (United States)

    Chávez-Aguilera, N.; Torres-García, E.; Mitsoura, E.

    2011-03-01

    High dose rate (HDR) and low dose rate (LDR) intracavitary brachytherapies dosimetry in clinical practice are typically performed by commercial treatment planning systems. However, these systems do not fully consider the heterogeneities present in the real structure of the patient. The aim of this work is to obtain isodose curves and surfaces around the usual array of sources used in LDR ( 137Cs) and HDR ( 192Ir) intracavitary brachytherapy by Monte Carlo simulation, considering the real anatomic structure, density and chemical composition of media and tissues from the female pelvic region. The structural information was obtained from computed tomography images in the DICOM format. A voxel phantom (VP) was developed to perform ionizing radiation transport, considering the gamma spectrum of 137Cs and 192Ir. The absorbed dose was computed within each voxel of 2×2×3 mm 3. Four materials were considered in the VP—air, fat, muscle tissue and bone; however, one material per voxel was defined. Results show and quantify the effect of density and chemical composition of the medium on the absorbed dose distribution. According to them, the treatment planning systems underestimate the absorbed dose by 8% approximately for both radionuclides. In a heterogeneous medium, the absorbed dose distribution of 192Ir is more irregular than that of 137Cs but spatially better defined.

  18. Ensiling on chemical composition and in vitro fermentation in rabbits of different forages

    Directory of Open Access Journals (Sweden)

    Juan Carlos Angeles Hernandez

    Full Text Available ABSTRACT: The effect of chemical composition of silages on in vitro gas fermentation profiles in rabbits was examined. The study was performed using 7 silages: beans (Phaseolus vulgaris, faba bean (FB, Vicia faba, common vetch (CV, Vicia sativa, ryegrass (Lolium perenne, barley (B, Hordeum vulgare, barley with common vetch (BCV and barley with faba bean (BFB. We used 3 New Zealand White (NZW rabbits as donors of caecal content in each incubation run (n=3. Data were analyzed in a completely randomized experimental design. The CV silage showed higher values of crude protein (CP, followed by FB and bean silages (P<0.001. Barley silage had the lowest CP content (96g kg-1 DM (P=0.001. The NDF and ADF content were lower (P<0.001 for beans and CV compared with the rest of the forage silages. Ryegrass silage had higher values of dry matter degradation, organic matter degradation, relative GP and SCFA (P<0.001. The highest values of digestible energy were for CV and bean silages (P<0.001. Ryegrass and CV silages showed higher levels in GP parameters, which could be associated with their better chemical composition characteristics, mainly protein and fiber content.

  19. Optimization of chemical composition in the manufacturing process of flotation balls based on intelligent soft sensing

    Directory of Open Access Journals (Sweden)

    Dučić Nedeljko

    2016-01-01

    Full Text Available This paper presents an application of computational intelligence in modeling and optimization of parameters of two related production processes - ore flotation and production of balls for ore flotation. It is proposed that desired chemical composition of flotation balls (Mn=0.69%; Cr=2.247%; C=3.79%; Si=0.5%, which ensures minimum wear rate (0.47 g/kg during copper milling is determined by combining artificial neural network (ANN and genetic algorithm (GA. Based on the results provided by neuro-genetic combination, a second neural network was derived as an ‘intelligent soft sensor’ in the process of white cast iron production. The proposed ANN 12-16-12-4 model demonstrated favourable prediction capacity, and can be recommended as a ‘intelligent soft sensor’ in the alloying process intended for obtaining favourable chemical composition of white cast iron for production of flotation balls. In the development of intelligent soft sensor data from the two real production processes was used. [Projekat Ministarstva nauke Republike Srbije, br. TR35037 i br. TR35015

  20. Chemical composition and antimicrobial activity of the essential oil from leaves of Algerian Melissa officinalis L.

    Science.gov (United States)

    Abdellatif, Fahima; Boudjella, Hadjira; Zitouni, Abdelghani; Hassani, Aicha

    2014-01-01

    The essential oil obtained from leaves of Melissa officinalis L. (Family of Lamiaceae) growing in Algeria, was investigated for its chemical composition and in vitro antimicrobial activity. The chemical composition was determined by hydrodistillation and analyzed by GC/MS and GC-FID. Sixty-three compounds were identified in the essential oil, representing 94.10 % of the total oil and the yields were 0.34 %. The major component was geranial (44.20 %). Other predominant components were neral (30.20 %) and citronellal (6.30 %). The in vitro antimicrobial activity was determined by paper disk agar diffusion testing and minimum inhibitory concentration (MIC) using 7 bacteria (3 Gram-positive and 4 Gram-negative), 2 yeasts and 3 fungi. The results showed that the essential oil presented high antimicrobial activity against all microorganisms targeted mainly against five human pathogenic bacteria, one yeast Candida albicans and two phytopathogenic fungi tested. The minimum inhibitory concentrations (MIC) ranged from 1.00 to 5.00 µL/mL. PMID:26417300