WorldWideScience

Sample records for grinding technology developed

  1. Ultrasonic precision optical grinding technology

    Science.gov (United States)

    Cahill, Michael J.; Bechtold, Michael J.; Fess, Edward; Wolfs, Frank L.; Bechtold, Rob

    2015-10-01

    As optical geometries become more precise and complex and a wider range of materials are used, the processes used for manufacturing become more critical. As the preparatory stage for polishing, this is especially true for grinding. Slow processing speeds, accelerated tool wear, and poor surface quality are often detriments in manufacturing glass and hard ceramics. The quality of the ground surface greatly influences the polishing process and the resulting finished product. Through extensive research and development, OptiPro Systems has introduced an ultrasonic assisted grinding technology, OptiSonic, which has numerous advantages over traditional grinding processes. OptiSonic utilizes a custom tool holder designed to produce oscillations in line with the rotating spindle. A newly developed software package called IntelliSonic is integral to this platform. IntelliSonic automatically characterizes the tool and continuously optimizes the output frequency for optimal cutting while in contact with the part. This helps maintain a highly consistent process under changing load conditions for a more accurate surface. Utilizing a wide variety of instruments, test have proven to show a reduction in tool wear and increase in surface quality while allowing processing speeds to be increased. OptiSonic has proven to be an enabling technology to overcome the difficulties seen in grinding of glass and hard optical ceramics. OptiSonic has demonstrated numerous advantages over the standard CNC grinding process. Advantages are evident in reduced tool wear, better surface quality, and reduced cycle times due to increased feed rates. These benefits can be seen over numerous applications within the precision optics industry.

  2. Development of ELID mirror surface grinding by cast iron bond grinding wheel. Ohkochi memorial technology prize; Chutetsu bond toishi ni yoru denkai inpurosesu doresshingu (ELID) kyomen kensakuho no kaihatsu. Okochi kinen gijutsusho jusho ni yosete

    Energy Technology Data Exchange (ETDEWEB)

    Omori, H.; Takahashi, I. [Institute of Physical and Chemical Research, Tokyo (Japan); Nakagawa, T. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Hagiuda, Y.; Karikome, K. [Tokyo Metropolitan College of Aeronautical Engineering, Tokyo (Japan)

    1997-08-01

    Development was accomplished on the electrolytic in-process dressing (ELID) mirror surface grinding process using a cast iron bonded grinding wheel. This paper describes the history of the development, which may be summarized as follows: a study was begun on powder forging of cutting chips in 1970; a research was started on powder forging of decarburized cast iron powder; developments were made on powder metallurgy of cast irons and cast iron bonded lapping tools in 1980, and cast iron bonded diamond grinding wheels were put on the market; a high-efficiency grinding process using MC and cast iron fiber-bonded grinding wheels were developed in 1985 and the grinding wheels made therefrom were put on the market; and a study was begun on the ELID grinding in 1987, and marketing was started on power supply, grinding liquid and tools for the ELID grinding process in 1990. Discussions on converting raw materials for the powder forging into cutting chips have triggered developing the cast iron bonded grinding wheel. The cast iron bonded diamond grinding wheel improves dressability and sharpness of conventional grinding wheels. The grinding wheel is fabricated by mixing carbonyl iron powder, diamond grinding grains and cast iron powder, pressing the mixture in a die, sintering it at 1140 degC, and assembling and dressing the sinter. The grinding stone can grind high-tech materials. 4 figs.

  3. Progress in abrasive and grinding technology

    CERN Document Server

    Xu, Xipeng

    2009-01-01

    The grinding and abrasive processing of materials are machining techniques which use bonded or loose abrasives to remove material from workpieces. Due to the well-known advantages of grinding and abrasive processes, advances in abrasive and grinding technology are always of great import in enhancing both productivity and component quality. In order to highlight the recent progress made in this field, the editor invited 21 world-wide contributions with the aim of gathering together all of the achievements of leading researchers into a single publication. The authors of the 21 invited papers, of

  4. Unsteady-State Grinding Technology (I) Theoretical Generalization and Research on Grinding Mechanism

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In conventional grinding theory, it is obvious that there must be a very high hardness difference between grains of the grinding wheel and workpieces. The best grinding wheels are those giving the lowest "natural limiting surface roughness" while cutting at appreciable plunge velocities. With the development of new materials and new machining processes, conventional theories of grinding techniques are no longer suitable to explain many phenomena in the course of grinding procedures. In dealing with precisio...

  5. Research Status and Development of Green Grinding Technology%绿色磨削加工技术研究现状及进展

    Institute of Scientific and Technical Information of China (English)

    霍文国; 徐九华; 傅玉灿; 戚厚军

    2011-01-01

    This paper reports new technology investigation of green grinding and grinding process. The traditional grinding process often uses the flood delivery coolant to lower the temperature in the grinding zone; but a lot of use of grinding fluid does great harm to environments and workers, and increases its cost of recycle. The thesis analyzes applications and technical characters of green grinding process such as dry cutting, minimum quantity lubricant, liquid nitrogen cooling, air eject cooling, inner cooling and solid lubrication cooling in machining. At last, we draw a conclusion that the green cutting process technology will gradually replace the conventional flood form. It is a developing direction for future manufacture and has a good outlook.%传统的磨削加工大量采用磨削液浇注法降低加工区温度,磨削液的大量使用给环境和操作者健康带来了很大危害,而且增加了磨削液排放回收的成本.本文分析了绿色磨削加工技术,如干磨削技术、微量润滑、液氮冷却、低温气体冷却、高压射流冷却、内冷却和固体润滑冷却技术在机械制造中的应用及其技术特征.绿色磨削加工技术将逐渐取代传统的浇注供液方法,是未来制造业的发展方向,具有很好的发展前景.

  6. Unsteady-State Grinding Technology (II) Experimental Studies of Grinding Forces and Force Ratio

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    As is known to all, grinding force is one of the most important parameters to evaluate the whole process of grinding. Generally, the grinding force is resolved to three component forces, namely, normal grinding force F n, tangential grinding force F t and a component force acting along the direction of longitudinal feed which is usually neglected because of insignificance. The normal grinding force F n has influence upon surface deformation and roughness of workpiece, while the tangential grinding force ...

  7. Development of database and searching system for tool grinding

    Directory of Open Access Journals (Sweden)

    J.Y. Chen

    2008-02-01

    Full Text Available Purpose: For achieving the goal of saving time on the tool grinding and design, an efficient method of developing the data management and searching system for the standard cutting tools is proposed in this study.Design/methodology/approach: At first the tool grinding software with open architecture was employed to design and plan grinding processes for seven types of tools. According to the characteristics of tools (e.g. types, diameter, radius and so on, 4802 tool data were established in the relational database. Then, the SQL syntax was utilized to write the searching algorithms, and the human machine interfaces of the searching system for the tool database were developed by C++ Builder.Findings: For grinding a square end mill with two-flute, a half of time on the tool design and the change of production line for grinding other types of tools can be saved by means of our system. More specifically, the efficiency in terms of the approach and retract time was improved up to 40%, and an improvement of approximately 10.6% in the overall machining time can be achieved.Research limitations/implications: In fact, the used tool database in this study only includes some specific tools such as the square end mill. The step drill, taper tools, and special tools can also be taken into account in the database for future research.Practical implications: The most commercial tool grinding software is the modular-based design and use tool shapes to construct the CAM interface. Some limitations on the tool design are undesirable for customers. On the contrary, employing not only the grinding processes to construct the grinding path of tools but the searching system combined with the grinding software, it gives more flexible for one to design new tools.Originality/value: A novel tool database and searching system is presented for tool grinding. Using this system can save time and provide more convenience on designing tools and grinding. In other words, the

  8. Mist-jetting Electrical Discharge Dressing Technology for Superabrasive Grinding Wheels

    Institute of Scientific and Technical Information of China (English)

    CAI Lan-rong; HU De-jin; JIA yan

    2008-01-01

    The technology of superabrasive grinding has been developed in order to achieve high-quality finish in extremely hard and brittle materials.Thereafter,truing and dressing technology on super abrasive grinding wheel is one of the most important subjects on precise machining field at present.In this paper,mist-jetting electrical discharge technology was applied to dressing metai-bonded superabrasive wheels.And a systematical study on the mechanism of selective removal of the bond was proposed.Experiments on dressing bronze bonded diamond grind wheels were carried out on a die-sinking electrical discharge machine.The diamond wheel topographies before and after electrical discharge dressing were observed by VH-800 3D digital microscope.The wheel profiles before and after dressing were observed.The results of electrical discharge dressing under different electrical parameters were compared.Experimental results indicate that the favorable surface topography can be obtained under suitable processing parameters and mist-jetting electrical discharge dressing (MEDD) is feasible for metal-bonded diamond grinding wheel.

  9. The Simulation of Grinding Wheels and Ground Surface Roughness Based on Virtual Reality Technology

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The paper describes the feasibility and method of the application of virtual reality technology to grinding process, and introduces the modeling method of object entity in the environment of virtual reality. The simulation process of grinding wheels and ground surface roughness is discussed, and the computation program system of numerical simulation is compiled with Visual C++ programming language. At the same time, the three-dimensional simulation models of grinding wheels and ground surface roughness are ...

  10. Achievement report for fiscal 1998 on area consortium research and development business. Area consortium for venture business development by building base for small business (high-efficiency superhigh-accuracy grinding technology by nano-scale in-process measurement and control using novel grinding wheel); 1998 nendo venture kigyo ikuseigata chiiki consortium kenkyu kaihatsu (chusho kigyo sozo kibangata). Shingata kensaku toishi wo mochiita nano in-process keisoku seigyo ni yoru konoritsu choseimitsu kensaku kako gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to develop a superflat grinding system for functional devices such as hard disks and magnetic heads. Cast iron powder is used as bonding material high in reacting with diamond for an increase in the anchoring power. A chemical reaction occurs to realize a strong bond between the two, producing a precision grinding wheel long in life and high in efficiency. A wheel with some hollows is also developed in which the grits have to bear more load because of the hollows, this achieving grinding efficiency five times higher than that of other types of the same grit size. A system is developed, provided with a constant pressure mechanism for the grinding direction and constant travel mechanism normal to the work surface. Using the constant pressure system, the grinding speed depends on the wheel grinding capability, and then the wheel is allowed to exhibits its best. The system suffers less clogging than the conventional ones. The specific grinding energy which is the index of the match between the wheel and the work may be determined, and this enables prompt condition optimization. It is proved that the wheel with hollows is remarkably higher in grinding capability than wheels of the same grit size on the market. The two are found to be alike in achieving top-class finish in terms of surface coarseness and flatness. (NEDO)

  11. Development of a grinding-specific performance test set-up

    DEFF Research Database (Denmark)

    Olesen, C. G.; Larsen, B. H.; Andresen, E. L.

    2015-01-01

    and an exponentially rising resistance. A custom-made grinding ergometer was developed with computer-controlled resistance and capable of collecting data during the test. The data collected can be used to find measures of grinding performance such as peak power, time to complete and the decline in repeated grinding......The aim of this study was to develop a performance test set-up for America's Cup grinders. The test set-up had to mimic the on-boat grinding activity and be capable of collecting data for analysis and evaluation of grinding performance. This study included a literature-based analysis of grinding...... demands and a test protocol developed to accommodate the necessary physiological loads. This study resulted in a test protocol consisting of 10 intervals of 20 revolutions each interspersed with active resting periods of 50 s. The 20 revolutions are a combination of both forward and backward grinding...

  12. STABLE DIAMOND GRINDING

    Directory of Open Access Journals (Sweden)

    Yury Gutsalenko

    2010-06-01

    Full Text Available The paper generalizes on the one hand theory of kinematic-geometrical simulation of grinding processes by means of tools with working part as binding matrix with abrasive grains located in it in random manner, for example diamond grains, and on the other hand practical performance of combined grinding process, based on introduction of additional energy as electric discharges and called by the organization-developer (Kharkov Polytechnic Institute «diamond-spark grinding» as applied to processing by means of diamond wheel. Implementation of diamond-spark grinding technologies on the basis of developed generalized theoretical approach allows to use the tool with prescribed tool-life, moreover to make the most efficient use of it up to full exhausting of tool-life, determined by diamond-bearing thickness. Development is directed forward computer-aided manufacturing.

  13. Some Key Technologies of a New-type CNC Curve Grinding Machine

    Institute of Scientific and Technical Information of China (English)

    WU Qi; HU De-jin

    2007-01-01

    This paper presented a new-type CNC curve grinding machine, in order to conquer the disadvantages of conventional NC curve grinding machine and improve surface quality, dimensional accuracy and machining efficiency. The new-type grinder adopts some high and new technologies:①the normal tracing device could make grinding wheel coincide with the normal direction of the machining points in work piece, and improve surface quality and dimensional accuracy;②the digital image on-line recognition system could monitor machining process and compensate wheel wear in real time;③linear motor drive mechanism could realize the exact adjustment of the grinding head digitally and increase the machining efficiency. The math models of normal tracing and circular tolerance zone were presented. The experimental results show that the new-type CNC curve grinding machine equipped with the three devices mentioned above is easy to realize the precision grinding of any complex curve, and improve surface quality, dimensional accuracy and machining efficiency.

  14. Development and Performance Evaluation of Maize Threshing and Grinding Machine

    Directory of Open Access Journals (Sweden)

    Ugwu K. C.

    2016-10-01

    Full Text Available The Maize threshing and grinding machine was designed, fabricated and its performance was evaluated. The machine consists of two compartments which include the threshing and grinding chamber. Threshing chamber is where the maize grain is been separated from the cob, and the cob will be collected through the outlet chute. Therefore, before the maize grain enters into the grinding chamber, blower will separate the grain from the chaff. The separated grain enters the grinding chamber and is being grounded by compressive means through the stationary disc and the grinding plate. A 2 hp electric motor provides drive through belt connections to drive the pulley on threshing chamber and another 2 hp electric motor provide drive for the grinding chamber. The actual test was conducted using three different moisture contents and feed rates. It was observed that the efficiency of the machine was hindered by high moisture content. The results obtained showed that the machine performed well at low moisture content. The efficiency of the machine was 99.01% on the moisture content of 10%. The analysis of variance (ANOVA of the results obtained at 5% percent probability confirmed that the moisture content of the maize was an important parameter that affects the performance of the machine

  15. High Efficiency Axial Deep Creep-Feed Grinding Machining Technology of Engineering Ceramics Materials

    Institute of Scientific and Technical Information of China (English)

    GUO Fang; ZHANG Baoguo; LU Hong; TIAN Xinli; WANG Jianquan; LI Fuqiang

    2012-01-01

    Axial deep creep-feed grinding machining technology is a high efficiency process method of engineering ceramics materials,which is an original method to process the cylindrical ceramics materials or hole along its axis.The analysis of axial force and edge fracture proved the cutting thickness and feed rate could be more than 5-10 mm and 200 mm/min respectively in once process,and realized high efficiency,low-cost process of engineering ceramics materials.Compared with high speed-deep grinding machining,this method is also a high efficiency machining technology of engineering ceramics materials as well as with low cost.In addition,removal mechanism analyses showed that both median/radial cracks and lateral cracks appeared in the part to be removed,and the processed part is seldom destroyed,only by adjusting the axial force to control the length of transverse cracks.

  16. GRINDING OF DOUBLE DISC GRINDING MACHINE

    Institute of Scientific and Technical Information of China (English)

    Hu Huiqing

    2005-01-01

    The grinding of two parallel sides of a component is accomplished with the accuracy and higher productivity by passing a blank through the truncated cone shape grinders, which are turned angles. The machine is designated by the name of double disc grinding machine (DDGM). Usually, it is used in the mass production. The relationship between these angles, the accuracy, productivity,allowance and parameters of the machine and technology is explained in detail by math, such as vector analysis, transformation of 3D space coordinates, etc. Therefore, in the aspects of qualitative and quantitative analyses, the grinding potential of DDGM is enormous increased and superior to conventional methods. Furthermore, the theoretical foundation of DDGM grinding design and technology is provided to improve, to expand and to create for future. The established machine design and practical experience of grinding technology will get great benefit by them.

  17. Development of a Wire Driven Robot for Grinding with Stiffness Adapted

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Along with development of new design and machining me thod production with more complex surface can be manufactured. Researching on th e new equipment used for surface disposal has become the important matter. Grind ing and polishing are a common surface processing method. A new type wire driven parallel robot used for grinding processing is proposed in this paper. Wire driven parallel robot is developed from parallel robot and serial wire driven r obot. Steel wire is used to replace the leg of paralle...

  18. Grinding and polishing technology by computer controlled active lap for Φ1250mmF/1.5 aspheric mirror

    Science.gov (United States)

    Fan, Bin; Zeng, Zhige; Li, Xiaojin; Chen, Qiang; Gao, Pingqi; Zhou, Jiabin; Wan, Yongjian

    2010-05-01

    For large aspheric optical elements, Computer Controlled Active Lap(CCAL) manufacturing which developed in IOE (Institute of Optics and Electronics, Chinese Academy of Science), have some advantages such as higher manufacturing efficiency, lower middle-frequency and high-frequency errors comparing the fixed lapping technology and CCOS(Computer Controlled Optical Surface) technology. A paraboloid surface of Φ1250mmF/1.5 was grinded by the active lap bonded with ceramic pills, as well as polished will pitch bonded active lap. During polishing processing a null lens was designed to test the paraboloid surface, the final testing data of RMS with ZYGO interferometer reached to 0.027λ(λ=0.6328μm).

  19. Technological Aspects of Forming the Surface Microrelief of Low-Wear Coatings after Electro-Diamond Grinding

    Science.gov (United States)

    Burov, V. G.; Yanpolskiy, V. V.; Rakhimyanov, K. Kh

    2016-04-01

    The results of electro-diamond grinding of coatings based on the WC25 powder material are presented in the paper. It is shown that after electro-diamond grinding of the WC25 coating, an obtained magnitude (Ra=2.02µm) of surface roughness doesn’t meet the qualifying standards to parts surface working in wear-out conditions. The forming of the obtained microrelief is probably connected to the features of electrochemical dissolution of the WC25 coating material in the electrolyte being used. Based on the polarization studies, it is revealed that the electrochemical dissolution character of the indicated coating in the water solution of 10%NaNO3 is determined by the dissolution character of cobalt (Co) component. The intensive cobalt (Co) dissolution during the electro-diamond grinding of the WC25 coating leads to the tungsten carbide chipping by the grinding disk particles that increases the roughness. One of the way to improve the surface quality of low-wear coatings after electro-diamond grinding is an introduction of an additional step in a technological process, carrying out with the switched off source of technological current. For realization of the process according to this scheme a technological dimension chain is made which takes into consideration the dissolution value of the most active coating composition element while the calculating of the operating dimensions of a detail.

  20. High Performance Grinding and Advanced Cutting Tools

    CERN Document Server

    Jackson, Mark J

    2013-01-01

    High Performance Grinding and Advanced Cutting Tools discusses the fundamentals and advances in high performance grinding processes, and provides a complete overview of newly-developing areas in the field. Topics covered are grinding tool formulation and structure, grinding wheel design and conditioning and applications using high performance grinding wheels. Also included are heat treatment strategies for grinding tools, using grinding tools for high speed applications, laser-based and diamond dressing techniques, high-efficiency deep grinding, VIPER grinding, and new grinding wheels.

  1. Research on CNC Turning System of Aspheric Machining Grinding Wheel

    Institute of Scientific and Technical Information of China (English)

    ZOU Qin; GUO Yin-biao

    2005-01-01

    The technology of machining aspheric surface with high precision is the premise for the application of aspheric surface. The grinding machining with error compensation is a commonly used method to machine aspheric surface, which will directly influence the quality of aspheric workpiece surface. Multifunctional CNC grinding wheel truing system is a four-axis CNC truing system which can be applied to grinding wheel truing. In this system,DSP-based multi-axes motion control card is adopted as the controller, and visual C++ is used as development tool.When the design of hardware and software is completed, the system can implement truing of various grinding wheel with high precision aspheric machining such as plane grinding wheel, arc grinding one, and sphere grinding one.

  2. Technology of Rubber Cryogenic Grinding%橡胶低温粉碎技术综述

    Institute of Scientific and Technical Information of China (English)

    杜琳琳

    2012-01-01

    随着我国经济的发展和汽车工业的兴起,橡胶消耗量及废旧轮胎产量正逐年上升。我国每年70%以上的天然橡胶和40%以上的合成橡胶需依赖进口,回收废旧橡胶生产胶粉,既可以作为橡胶原料的补充,又可以缓解"黑色污染"引发的环境问题。介绍了废旧橡胶回收利用方式,提出低温粉碎法是生产精细胶粉的发展方向。通过对液氮冷冻粉碎法、空气冷冻粉碎法和LNG冷能低温粉碎法的比较,提出直接或间接利用LNG冷能低温粉碎生产胶粉,可以降低胶粉生产成本,带动废旧橡胶循环利用产业发展。%With the development of economic and the automobile industry in China,rubber consumption and waste tire production are increasing every year.In China,more than 70 % natural rubber and more than 40 % synthetic rubber need to rely on importing every year.Recycling of waste rubber and producing rubber powder can not only as a complement of rubber raw materials,but also alleviate the environmental problems caused by the "black pollution".It was introduced the way to recycle waste rubber,and indicated that freeze grinding was the developing direction in fine rubber powder production.By comparing freeze grinding in liquid nitrogen,air freeze grinding and LNG cold cryogenic,it was pointed that by direct or indirect using of LNG cold energy to produce rubber powder by cryogenic grinding,the powder production costs can be lower,and it can also drive waste rubber recycling industry development.

  3. Research on Stability Prediction of the Crankshaft CNC Tangential Point Tracing Grinding

    Directory of Open Access Journals (Sweden)

    Zhuoda Jiang

    2015-01-01

    Full Text Available As the key part of internal combustion engines, crankshaft with high efficiency and accuracy processing has always been the target of the engine manufacturer’s pursuit. Grinding is used to obtain the ultimate dimensional accuracy and surface finish in the crankshaft machining. Grinding of the main journals and the pin journals can be accomplished in a single clamping operation by CNC Tangential Point Tracing grinding technology. However, the chatter in the grinding process is harmful to the precision and surface quality. In this paper, stability lobe diagram is developed to predict the grinding chatter. First the dynamic model of Tangential Point Tracing grinding system is established. Then the limit formula of the critical grinding depth is calculated and the stability lobe diagram of the grinding system is presented. Finally, the validation experiments are carried out on the crankshaft grinding machine and the results are consistent with the calculation.

  4. Influence of grinding on service properties of VT-22 powder applied in additive technologies

    Science.gov (United States)

    Zakharov, M. N.; Rybalko, O. F.; Romanova, O. V.; Gelchinskiy, B. R.; Il’inykh, S. A.; Krashaninin, V. A.

    2017-01-01

    Powder of titanium alloy (VT-22) produced by plasma-spraying was subjected to grinding to obtain powder with size less 100 microns. These powders were sprayed by plasma unit using two types of gases, namely, air and air with methane (spraying in water and sputtering of coating on steel support). Influence of grinding time on yield of powder of required fraction was studied. Morphology and phase composition of the grinded powder and plasma sprayed one were under investigation. In the result of experiments, it appears that the grinding time genuinely influences the chemical and phase compositions, but there is no effect on physical-processing properties. For powders after plasma spraying some changes of non-metal elements content were detected by chemical analysis. Using gaseous mixture of air and methane in plasma spraying unit leads to formation of a new phase in the powder according X-ray diffraction data.

  5. Optimization on manufacturing and testing technology for rectangle aperture off-axis aspheric mirror fine grinding

    Science.gov (United States)

    Chen, Xi; Guo, Peiji; Wang, Dongdong

    2016-10-01

    High precision aspheric surface can be obtained conveniently by using single point diamond turning technology, liquidmagnetic polishing technology and ion beam polishing technology, but the costs of manufacturing is too enormous to be widely used. In fact, in the field of optical processing, the most commonly used technical solution is still making a best fit sphere firstly compared with aspheric equation, and then remove the material on the glass to correct the error between aspheric and best fit sphere by precision grinding and precision polishing. The resolving of the best-fit sphere and the material removal, however, is a very important problem during the fabrications. The two dimensional maps of surface error between the best fit sphere and the corresponding aspheric surface shows W shaped which has the maximum removal at the center and the edge of the workpeace and gradually reduces to zero at the 70.7 percent of the diameter. In the process of deterministic optical manufacturing, the edge effect will arise because of the change of machining conditions when polishing tool locates in edge area, which will lower the surface accuracy of workpiece and debase machining efficiency. W shaped error distribution and the edge effect will make it difficult to remove the error on the edge of the workpiece. Aiming at the situation, an algorithm available for control of edge effect is proposed. Considering the requirement of minimum material removal and the control of edge effect, the radius of the anti-edge effect sphere is calculated by programming. The advantage of the algorithm is shown by the comparison of results derived from new algorithm and empirical equation. At the same time, the application in the off-axis asphere fabrications also proves the correctness of the algorithm. This algorithm is very helpful for the theory and practice of the fabrications of off-axis asphere.

  6. INFLUENCE OF TECHNOLOGICAL MODES OF MAGNETIC-ELECTRIC GRINDING ON MICROSTRUCTURE OF GAS-THERMAL SPRAYED NI–CR–B–SI-COATINGS

    OpenAIRE

    N. V. Spiridonov; M. V. Niaroda; I. O. Sokorov; A. A. Barkun

    2009-01-01

    Influence of technological modes of magnetic-electric grinding on structural changes in a surface layer of gas-thermal sprayed coatings is investigated in the paper. The paper presents optimum modes of  coating roughing and finishing processes.

  7. TC4钛合金高效磨削加工用环形热管砂轮的研制%Development of Annular Heat Pipe Grinding Wheel for High Efficiency Machining of TC4 Titanium Alloy

    Institute of Scientific and Technical Information of China (English)

    赫青山; 傅玉灿; 徐鸿钧; 马可; 陈琛

    2013-01-01

    Workpiece burnout is one of the distressing problems to be solved for the difficult-to-machine material TC4 titanium alloy due to the high grinding temperature caused by excessive grinding heat accumulation in the grinding zone.A new method of cooling the grinding zone by means of heat pipe technology is proposed in this paper.The heat transfer principle of an annular heat pipe grinding wheel(HPGW)was illustrated in the grinding process and an annular HPGW was designed and developed for high efficiency grinding of titanium alloy TC4.The manufacture was performed of annular heat pipe in the wheel consisting of three processes of vacuum pumping,working fluid filling and mechanical sealing.Finally,grinding experiments with different wheels (HPGW and non-HPGW) were carried out to verify the effect of enhancing heat transfer in the grinding zone under the same grinding condition for titanium alloy TC4.The results show that using the HPGW can effectively reduce the grinding temperature and prevent burnout in the grinding process.%针对航空航天高强韧性难加工材料TC4钛合金在磨削加工中存在磨削温度高而导致工件表面烧伤的问题,提出利用热管换热技术冷却磨削弧区的新方法.分析了环形热管砂轮在加工中对磨削弧区的强化换热原理,并设计制作出能够用于磨削加工的环形热管砂轮,同时实现了对砂轮基体内环形管腔的密封、抽真空、精确注液与机械式真空封口.最后,在相同磨削工艺条件下,使用环形热管砂轮和无热管砂轮进行TC4钛合金缓进给深切磨削对比试验,验证了环形热管砂轮对磨削弧区温度的控制效果.试验结果表明:设计制作的环形热管砂轮在TC4钛合金高效磨削过程中可以有效降低磨削温度,避免工件表面出现烧伤.

  8. Three-dimensional measurement and characterization of grinding tool topography

    Science.gov (United States)

    Cui, Changcai; Blunt, Liam; Jiang, Xiangqian; Xu, Xipeng; Huang, Hui; Ye, Ruifang

    2013-01-01

    A comprehensive 3-dimensional measurement and characterization method for grinding tool topography was developed. A stylus instrument (SOMICRONIC, France) was used to measure the surface of a metal-bonded diamond grinding tool. The sampled data was input the software SurfStand developed by Centre for Precision Technology (CPT) for reconstruction and further characterization of the surface. Roughness parameters pertaining to the general surface and specific feature parameters relating to the grinding grits, such as height and angle peak curvature have been calculated. The methodology of measurement has been compared with that using an optical microscope. The comparison shows that the three-dimensional characterization has distinct advantages for grinding tool topography assessment. It is precise, convenient and comprehensive so it is suitable for precision measurement and analysis where an understanding of the grinding tool and its cutting ability are required.

  9. Satisloh centering technology developments past to present

    Science.gov (United States)

    Leitz, Ernst Michael; Moos, Steffen

    2015-10-01

    The centering of an optical lens is the grinding of its edge profile or contour in relationship to its optical axis. This is required to ensure that the lens vertex and radial centers are accurately positioned within an optical system. Centering influences the imaging performance and contrast of an optical system. Historically, lens centering has been a purely manual process. Along its 62 years of assembling centering machines, Satisloh introduced several technological milestones to improve the accuracy and quality of this process. During this time more than 2.500 centering machines were assembled. The development went from bell clamping and diamond grinding to Laser alignment, exchange chuckor -spindle systems, to multi axis CNC machines with integrated metrology and automatic loading systems. With the new centering machine C300, several improvements for the clamping and grinding process were introduced. These improvements include a user friendly software to support the operator, a coolant manifold and "force grinding" technology to ensure excellent grinding quality and process stability. They also include an air bearing directly driven centering spindle to provide a large working range of lenses made of all optical materials and diameters from below 10 mm to 300 mm. The clamping force can be programmed between 7 N and 1200 N to safely center lenses made of delicate materials. The smaller C50 centering machine for lenses below 50 mm diameter is available with an optional CNC loading system for automated production.

  10. A 6-DOF parallel bone-grinding robot for cervical disc replacement surgery.

    Science.gov (United States)

    Tian, Heqiang; Wang, Chenchen; Dang, Xiaoqing; Sun, Lining

    2017-05-24

    Artificial cervical disc replacement surgery has become an effective and main treatment method for cervical disease, which has become a more common and serious problem for people with sedentary work. To improve cervical disc replacement surgery significantly, a 6-DOF parallel bone-grinding robot is developed for cervical bone-grinding by image navigation and surgical plan. The bone-grinding robot including mechanical design and low level control is designed. The bone-grinding robot navigation is realized by optical positioning with spatial registration coordinate system defined. And a parametric robot bone-grinding plan and high level control have been developed for plane grinding for cervical top endplate and tail endplate grinding by a cylindrical grinding drill and spherical grinding for two articular surfaces of bones by a ball grinding drill. Finally, the surgical flow for a robot-assisted cervical disc replacement surgery procedure is present. The final experiments results verified the key technologies and performance of the robot-assisted surgery system concept excellently, which points out a promising clinical application with higher operability. Finally, study innovations, study limitations, and future works of this present study are discussed, and conclusions of this paper are also summarized further. This bone-grinding robot is still in the initial stage, and there are many problems to be solved from a clinical point of view. Moreover, the technique is promising and can give a good support for surgeons in future clinical work.

  11. Numerical Simulation of a Grinding Process for the Spatial Work-pieces: Modeling of Grinding Forces and System Dynamics

    Directory of Open Access Journals (Sweden)

    I. A. Kiselev

    2015-01-01

    Full Text Available The paper describes a computation-experimental technique to determine model coefficients of grinding forces using a Nelder-Mead algorithm. As an error function, the paper offers a deviation measure of calculating and experimental grinding forces averaged for a single-pass of the grinding wheel. As an example of cutting forces model coefficients calculation for linear model, in which the grinding forces depend on uncut chip thickness is analyzed. The coefficients vary on abrasive grain geometric parameters and are determined applying the authors-developed method based on Nelder-Mead technique. The measured forces while plane grinding of test work-piece are used to determine the coefficients. Model coefficients are identified if compare the measured data with the results of modeling for grinding by tool with the uniformly distributed abrasive grains with the triangular shape of cutting edge.Grinding dynamics simulation applying the determined coefficients was carried out for the processing of cantilever plane work-piece as a test example. The work-piece was processed by grinding wheel transverse passages made at different distances from the fixation. A selfoscillating process accompanied by vibration of high level was observed for some selected technological parameters of grinding. The simulation has shown qualitative and quantitative compliance with the experiment. It was shown that the intensity of the self-oscillating process arising during the processing depends on the work-piece rigidity and cutting conditions. The results of modeling can be applied in practice in developing the technology process of grinding the spatial work-pieces.

  12. The development of electrolyte grinding fluid on grinding with electrolyte in-process dressing%在线电解修整磨削的电解磨削液研制

    Institute of Scientific and Technical Information of China (English)

    朴承镐; 乔宏; 李杰; 李建军

    2001-01-01

    为了对金属结合剂砂轮电解修整,研究并配制了电解磨削液。根据电解磨削液的性能要求, 分析确定了电解磨削液中具有电解、钝化、防锈和润滑等性能的各组元,并通过静态实验确认了各组元对电解磨削液性能的影响。确定最佳电解磨削液在实际系统中对金属结合剂砂轮进行电解修整得到了较为满意的修整结果。所研制的电解磨削液具有实用价值,可用于生产。%In order to electrolyze dressing grinding wheel of metal binding agent, the elec trolytic grinding fluid is developed. According to the requirements of the elec trolytic grinding fluid, each constituent with properties such as the el ectrolysis, the inactivation, the rust prevention and the lubrication are analyz ed and determined and their effects to the electrolytic grinding fluid is obtain ed through the static experiments. In the actual system, the grinding wheel of metal binding agent is electrolytically dressed with the determined optimum elec trolytic grinding fluid and the satisfied dressing result is obtained. So the d eveloped electrolytic grinding fluid possesses the practical value which can be used in the manufacturing.

  13. INFLUENCE OF TECHNOLOGICAL MODES OF MAGNETIC-ELECTRIC GRINDING ON MICROSTRUCTURE OF GAS-THERMAL SPRAYED NI–CR–B–SI-COATINGS

    Directory of Open Access Journals (Sweden)

    N. V. Spiridonov

    2009-01-01

    Full Text Available Influence of technological modes of magnetic-electric grinding on structural changes in a surface layer of gas-thermal sprayed coatings is investigated in the paper. The paper presents optimum modes of  coating roughing and finishing processes.

  14. The Development of Camshaft Grinding Software Based on Siemens 840D sl%基于西门子840Dsl系统的凸轮轴磨削软件开发∗

    Institute of Scientific and Technical Information of China (English)

    刘倩; 韩秋实; 彭宝营

    2015-01-01

    Select Siemens 840D sl CNC system as development platform, with Camshaft grinding software as the object of the research,using SINUMERIK Operate programming package offered by Siemens provides Qt Designer interface design,VS 2008 C++ language environment to write the underlying code,achieve cam-shaft grinding software interface development,adoptting C++ interface technology embedded HMI camshaft grinding Siemens 840D sl CNC system,ultimately achieve the camshaft grinding software applications.%选取西门子840 D sl数控系统为开发平台,以凸轮轴磨削软件为研究对象,采用西门子公司提供的SINUMERIK Operate编程包提供的Qt Designer设计界面,Visual Studio 2008环境下的C++语言编写底层代码,实现凸轮轴磨削软件界面开发,采用C++接口技术将凸轮轴磨削HMI嵌入西门子840 D sl数控系统,最终实现了凸轮轴磨削软件的应用。

  15. Analysis of Grinding Force and Elastic Deformation in Thread Grinding Process

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2013-01-01

    Full Text Available Considering the grinding geometry of the thread grinding dynamic contact arc length, a dynamic numerical thread grinding model has been set up on the basis of study of a single grit grinding model. The properties of grinding force and dynamic contact arc-length have been studied by means of the developed numerical model. The results have shown that the angle of helix has little effect on the dynamic contact arc-length than the wheel speed on the dynamic contact arc-length. And the wheel speed also produced a large effect on grinding force.

  16. Optimization of wet ultrafine grinding technology for Hirudo extraction%水蛭的湿法超微粉碎提取及其工艺优化

    Institute of Scientific and Technical Information of China (English)

    朱华明; 付廷明; 郭立玮; 刘峰; 张伟

    2013-01-01

    Objective To study the optimal extraction for Hirudo by wet ultrafine grinding technology.Methods On the basis of single-factor experiments,the response surface analysis was made for exploring the optimal extraction conditions by wet ultrafine grinding technology for Hirudo,with solid-liquid ratio,soaking time,extraction temperature,and grinding time as independent variable and the anticoagulant activity as the response value.According to Box-Behnken principles,the response surface analysis method with four factors and three levels was used.Results The optimum extraction condition for Hirudo by wet ultrafine grinding technology was as follows:solid-liquid ratio 1.12,soaking time 4.9 h,extraction temperature 6.5 ~C,grinding time 12 min; The anticoagulant activity could reach 20.13 U/g.Conclusion The extraction by wet ultrafine grinding technology for Chinese materia medica Hirudo is stable and feasible,and it could be further promoted.%目的 优选湿法超微粉碎提取水蛭的最佳工艺.方法 在单因素试验基础上,以料液比、浸泡时间、提取温度和粉碎时间为自变量,根据Box-Behnken原理采用4因素3水平的响应面分析法,以抗凝血酶活性为响应值,对湿法超微粉碎提取条件进行优化.结果 湿法超微粉碎提取水蛭的最佳工艺条件:料液比为1∶12,浸泡时间为4.9h,提取温度为6.5℃,粉碎时间为12 min,其抗凝血酶活性达到20.13 U/g.结论 湿法超微粉碎提取技术适用于水蛭的提取,本实验优选的提取工艺稳定可行,适于进一步推广应用.

  17. Surface grinding of intermetallic titanium aluminides

    CERN Document Server

    Gröning, Holger Andreas

    2014-01-01

    A deductive kinematic model of creep-feed and speed-stroke grinding processes is developed to identify possibilities to reduce the energy introduced into the workpiece. By computer tomography analysis and tactile measurements of the grinding wheel the pore volume and the static cutting edge number are determined and included in the model. Based on the kinematic model and the grinding wheel characteristics an analytical evaluation of the specific grinding energy for speed-stroke and creep-feed grinding is carried out. The deducted process design is evaluated in experimental investigations. The

  18. Development and mechanical characterization of a polypropylene (pp) composite with grinding sludge as fiber

    Science.gov (United States)

    Rodrigues, D. A.; Oliveira, A. S. M.; Specht, R. F.; Santana, R. M. C.

    2014-05-01

    The search for alternative materials that provide reduced costs in manufacturing processes, and the need of to recycle materials normally disposable, it has aroused great interest and much research, with regard to reduction of material consumption due to its high cost and scarcity. Within this focus, this work aims to characterize a thermoplastic composite, whose polymer matrix is polypropylene (PP), and as disperse phase "grinding sludge, GS" from the various machining processes for grinding. After drying and sieving the GS and its subsequent mixing with the thermoplastic resin to prepare the PP/GS composites formulated were 80/20, 70/30, 60/40 w/w. The composite was injected into an injection mold in the form specimen test. The specimens followed the ASTM D638 and ASTM D256 for tensile and impact respectively. Three processing parameters were varied: the content of GS, temperature and injection rate. Each of these variables has three levels: L (low), M (medium) and H (high), making all possible combinations, totaling 27 processing conditions. The experimental conditions followed a statistical design obtained with the software Statgraphics Centurion, where the effects of variables are studied according to their statistical significance. An analysis of MEV and EDS was performed to obtain the characteristics of the "grinding sludge" (geometry and composition). Despite having been sifted, the geometry of the GS was still very rough, with varied shapes and sizes, and even made up a small percentage of abrasive grains. The variable that most influenced the mechanical properties was the content of particulate GS. The values obtained for the maximum tensile strength not behaved in descending order as expected, this may be the effect of small amount of samples tested. The results of the mechanical properties showed that for the elasticity modulus increased with increasing of GS; the values of elongation and impact strength decreased with increasing of GS.

  19. Numerical Simulation of a Grinding Process Model for the Spatial Work-pieces: Development of Modeling Techniques

    Directory of Open Access Journals (Sweden)

    S. A. Voronov

    2015-01-01

    Full Text Available The article presents a literature review in simulation of grinding processes. It takes into consideration the statistical, energy based, and imitation approaches to simulation of grinding forces. Main stages of interaction between abrasive grains and machined surface are shown. The article describes main approaches to the geometry modeling of forming new surfaces when grinding. The review of approaches to the chip and pile up effect numerical modeling is shown. Advantages and disadvantages of grain-to-surface interaction by means of finite element method and molecular dynamics method are considered. The article points out that it is necessary to take into consideration the system dynamics and its effect on the finished surface. Structure of the complex imitation model of grinding process dynamics for flexible work-pieces with spatial surface geometry is proposed from the literature review. The proposed model of spatial grinding includes the model of work-piece dynamics, model of grinding wheel dynamics, phenomenological model of grinding forces based on 3D geometry modeling algorithm. Model gives the following results for spatial grinding process: vibration of machining part and grinding wheel, machined surface geometry, static deflection of the surface and grinding forces under various cutting conditions.

  20. Grind hardening process

    CERN Document Server

    Salonitis, Konstantinos

    2015-01-01

    This book presents the grind-hardening process and the main studies published since it was introduced in 1990s.  The modelling of the various aspects of the process, such as the process forces, temperature profile developed, hardness profiles, residual stresses etc. are described in detail. The book is of interest to the research community working with mathematical modeling and optimization of manufacturing processes.

  1. FY 1998 annual report on the development of laser-aided, noncontacting, realtime, in-process dressing method using a grinding stone with ultrafine abrasive grains, and study on techniques for applying the method to grinding stone of superthin blades; 1998 nendo laser wo mochiita choteiryu toishi no hisesshoku real time inprocess dressing ho no kaihatsu oyobi gokuusuha toishi eno tekiyo gijutsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new noncontacting dressing method using a laser as a tool has been studied and developed, in order to develop environment-compatible, energy-saving type machining machines. In this study, a cup-shaped grinding stone is developed for grinding performance testing by micron-order diamond abrasive powder, used for producing a grinding stone of superthin blades, is mixed with a cast iron binder, molded and sintered. In the grinding performance test, zirconia as a work is ground at a constant pressure to the grinding stone working surface before and after the laser-aided dressing, to analyze grinding/removal efficiency and grinding resistance. The grinding stone working surface conditions are observed by a scanning electron microscope after the laser-aided dressing, to correlate the surface conditions with the grinding data. It is found that the laser-aided dressing method needs no lubricant, is clean, cutting grinding time when incorporated in the machining process, suitable for grinding stone of low stiffness and ultrathin blades by use of ultrafine abrasive grains, suffering no exfoliation of the diamond grains, and hence economical. (NEDO)

  2. Development of HCM Double-tray Hovering Wind Micro-powder Impact Grinding%HCM双盘旋风微粉冲击磨的研制

    Institute of Scientific and Technical Information of China (English)

    卢乐民; 范顺利; 容北国; 罗习

    2011-01-01

    超细粉体的规模化生产对粉磨设备的主要要求是稳定、高效、节能,HCM双盘旋风微粉冲击磨通过采用独特的双盘对转、双层破碎腔顺序多级粉磨技术,对冲击元件采用耐磨材料或耐磨处理,使之具有冲击能量大,能量转化高、使用寿命长等优势,可满足超细粉体的规模化生产的需求,经过用户使用验证:HCM双盘旋风微粉冲击磨具备超细粉体无级调节,单位产量能耗低,节能环保等特点,其各项主要技术指标达到设计预期,能满足客户的各类超细粉体加工需求.%Modern scale production of ultra-fine powder is a trend in ultra-fine powder in processing industry. The main requirment of grinding equipment is stability,high efficiency,and energy conservation. HCM dual-cone impact mill is demanded to develop to meet the need of modern scale production of ultra-fine powder with its multi-stage grinding technology by two cones counterrotating and crushing in two chambers. HCM dual-cone impact mill is noted for high impacting strength,high efficiency on energy transferring and long using time. The stepless adjustment of powder fitness,low energy consumption and Environmental Protection of HCM dual-cone impact mill are verified in practice. As all the design guarantee figures have been reached.it can meet the requirment of all ultra-fine powder processing.

  3. Development and application of a green fluorescent protein (GFP) expressing E. coli O103 surrogate for tracking contamination through grinding and identifying persistent points of contamination

    Science.gov (United States)

    Objective: To 1.) develop and validate an easily trackable E. coli O157:H7/non-O157 STEC surrogate that can be detected to the same level of sensitivity as E. coli O157:H7; and 2.) apply the trackable surrogate to model contamination passage through grinding and identify points where contamination ...

  4. 圆弧头立铣刀端刃CNC磨削仿真技术研究%Research on CNC grinding simulation technology of torus end milling cutter's end edges

    Institute of Scientific and Technical Information of China (English)

    刘建军; 黎荣; 程雪锋; 金晓波; 丁国富

    2012-01-01

    A technology on universal end edges model and CNC grinding simulation of torus end milling cutters is introduced. With the theory of space vector rotation,the universal mathematic model of end edges above center or not was builded. Based on the accurate cutting - edge model, the grinding processes of the end milling cutter end - edge rake & flank faces were researched, and also the wheel' s moving path and tool axis vector were calculated. Meanwhile, the post processing program of five-axis NC grinder and the virtual simulation environment based on VERICUT software were developed, and three kinds of end-edge models with different tooth number were geted through grinding simulation,which validated acquired cutter location data. Taking four edges end milling cutter with two edges above center as example, the grinding simulation technology proposed was verified by measuring the structure parameters of simulation model and physical model,and comparing them with design parameters.%介绍一种圆弧头立铣刀端刃的通用建模及CNC磨削仿真技术.运用空间矢量旋转原理,对过中心和不过中心端齿刃线建立通用数学模型.基于所建立的精确刃线数模,研究了立铣刀端刃前、后刀面的磨削加工工艺并计算出砂轮的运动轨迹和刀轴矢量.开发了五轴数控磨床的后置处理程序和基于VERICUT软件的虚拟仿真环境,加工出三类不同齿数的立铣刀端齿模型,对获得的刀位数据正确性进行了验证.以两齿过中心的四齿平底立铣刀为例,通过测量仿真模型和加工实物的结构参数并与设计参数进行对比,验证了提出的磨削仿真技术的可行性.

  5. Precision diamond grinding of ceramics and glass

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.; Paul, H.; Scattergood, R.O.

    1988-12-01

    A new research initiative will be undertaken to investigate the effect of machine parameters and material properties on precision diamond grinding of ceramics and glass. The critical grinding depth to initiate the plastic flow-to-brittle fracture regime will be directly measured using plunge-grind tests. This information will be correlated with machine parameters such as wheel bonding and diamond grain size. Multiaxis grinding tests will then be made to provide data more closely coupled with production technology. One important aspect of the material property studies involves measuring fracture toughness at the very short crack sizes commensurate with grinding damage. Short crack toughness value`s can be much less than the long-crack toughness values measured in conventional fracture tests.

  6. Method of accurate grinding for single enveloping TI worm

    Institute of Scientific and Technical Information of China (English)

    SUN; Yuehai; ZHENG; Huijiang; BI; Qingzhen; WANG; Shuren

    2005-01-01

    TI worm drive consists of involute helical gear and its enveloping Hourglass worm. Accurate grinding for TI worm is the key manufacture technology for TI worm gearing being popularized and applied. According to the theory of gear mesh, the equations of tooth surface of worm drive are gained, and the equation of the axial section profile of grinding wheel that can accurately grind TI worm is extracted. Simultaneously,the relation of position and motion between TI worm and grinding wheel are expounded.The method for precisely grinding single enveloping TI worm is obtained.

  7. Research on Visualization in Scientific Computation of Grinding Temperature Field

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The paper introduces the concepts, classification and method of visualization in scientific computation. Visual C++ developing tool is used to compute surface grinding forces and grinding temperature field models. The three-dimensional entity model of workpiece is made with OpenGL tool, and the different colors on the workpiece entity show different value of temperature, so the visualization of grinding temperature field is realized. The temperature value of every points in grinding temperature field, the c...

  8. Development of a mini-tablet of co-grinded prednisone-Neusilin complex for pediatric use.

    Science.gov (United States)

    Lou, H; Liu, M; Wang, L; Mishra, S R; Qu, W; Johnson, J; Brunson, E; Almoazen, H

    2013-09-01

    The purpose of this study is to enhance the dissolution rate of prednisone by co-grinding with Neusilin to form a complex that can be incorporated into a mini-tablet formulation for pediatrics. Prednisone-Neusilin complex was co-grinded at various ratios (1:1, 1:3, 1:5, and 1:7). The physicochemical properties of the complex were characterized by various analytical techniques including: differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), scanning electron microscope (SEM), particle size, surface area, solubility, and dissolution rate. The co-grinded prednisone-Neusilin complex (1:7) was blended with other excipients and was formulated into a 2-mm diameter mini-tablet. The mini-tablets were further evaluated for thickness, weight, content uniformity, and dissolution rate. To improve taste masking and stability, mini-tablets were coated by dip coating with Eudragit® EPO solution. DSC and XRPD results showed that prednisone was transformed from crystalline state into amorphous state after co-grinding with Neusilin. Particle size, surface area, and SEM results confirmed that prednisone was adsorbed to Neusilin's surface. Co-grinded prednisone-Neusilin complex (1:7) had a solubility of 0.24 mg/mL and 90% dissolved within 20 min as compared to crystalline prednisone which had a solubility of 0.117 mg/mL and 30% dissolved within 20 min. The mini-tablets containing co-grinded prednisone-Neusilin complex (1:7) exhibited acceptable physicochemical and mechanical properties including dissolution rate enhancement. These mini-tablets were successfully dip coated in Eudragit® EPO solution to mask the taste of the drug during swallowing. This work illustrates the potential use of co-grinded prednisone-Neusilin to enhance solubility and dissolution rate as well as incorporation into a mini-tablet formulation for pediatric use.

  9. Development of superconductor application technology

    Energy Technology Data Exchange (ETDEWEB)

    Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs.

  10. High Efficiency ELID Grinding of Garnet Ferrite

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Hard and brittle materials such as ferrite, optical glass and ceramics have been widely used in many fields because of their good characteristics and still gain more attentions. However, it is difficult to machine and get good surface quality. Some parts made of these materials have large machining allowances and need to be produced with large batch, but the machining efficiency is very low with usual grinding method. So it is of great importance to research the high efficiency grinding technology of hard ...

  11. Applying minimally invasive plastic technology in treating facial grinding contusion%微创整形技术在面部碾挫伤中的应用

    Institute of Scientific and Technical Information of China (English)

    马莉; 程维峰; 周建玺

    2013-01-01

    目的:回顾性分析面部碾挫伤患者采用微创整形技术缝合的临床效果.方法:2006年4月-2009年9月共治疗28例患者,伤口均在面部,采用精细的原位再生清创术和综合性的整形缝合技术.结果:均达到Ⅰ期愈合,恢复快,创伤小,外观自然,瘢痕不明显,无明显组织牵拉,患者对外形满意.结论:在面部碾挫伤中,综合运用微创整形技术,可以明显减轻患者的创伤,促进愈合,避免术后瘢痕及畸形的发生,是处理面部急诊外伤的好方法.%Objective Retrospectively analyze the clinical treat effect of minimally invasive orthopedic technology suture in facial grinding contusion patients. Methods From April 2006 to September 2009, 28 patients with facial wounds were treated with the fine debridement of situ regeneration and comprehensive orthopedic suture techniques. Results All patients were healed with little trauma and recoveried fastly were satisfied of physical appearance with no obvious scar and tissue retraction. Conclusion In the facial grinding contusion patients, comprehensive use of minimally invasive plastic technology can significantly reduce the trauma, promote healing and prevent postoperative scar or deformity.

  12. Modulus Proposal for a Multi Axes Grinding of Sculptured Surfaces

    Science.gov (United States)

    Jandečka, Karel

    2009-11-01

    This paper presents the use of the CAD/CAM system Cimatron for free programming of NC grinding machines. NC technology use, first of all in milling, turning and drilling operations, is widely dispersed at present. Development of these technologies depends to some extent on the cutting tools which are to be produced and sharpened to a high quality. Usable properties of the cutting tools, e.g. the shape accuracy, the quality of function surfaces, etc., are inspired by the production technology used. This technology plays a main role in production and sharpening of powerful and complex shaped cutting tools.

  13. ELID Mirror Grinding Technology——Development of Metal Bonded Grinding Wheel%ELID镜面磨削技术——金属结合剂砂轮的研制

    Institute of Scientific and Technical Information of China (English)

    关佳亮; 郭东明; 周曙光; 袁哲俊

    2001-01-01

    As the result of the study on the effects of copper powder and other relative metal additives used for ELID grinding wheel manufacturing, a new kind of grinding wheel is presented for ELID grinding and experimental results show that such a grinding wheel has its great advantage and can be used for production pur pose.%采用铜粉、还原铁粉、铸铁粉并辅以改善铁粉和铸铁粉末冶金性能的金属添加剂作配方,烧制出适合现有生产条件的ELID磨削用砂轮磨块。性能检验表明该配方满足了ELID磨削要求。

  14. 凸轮轴高速数控磨削在位测量技术%On-machine Measurement Technology of Camshaft High Speed NC Grinding

    Institute of Scientific and Technical Information of China (English)

    万林林; 邓朝晖; 黄强; 刘志坚

    2015-01-01

    基于 USB 总线技术与自复位光栅位移传感器开发了凸轮轴轮廓在位测量装置,对磨削后的凸轮轴进行了在位升程测量。介绍了测量原理及升程测量过程,采用“敏感点”法并结合三次均匀 B 样条拟合与最小二乘法对测量数据进行了处理,求解了凸轮升程的起始转角,获得了凸轮的实测升程。利用在位测量装置与 BG1310-10型凸轮轮廓检测仪针对同一凸轮轴样件进行了对比检测实验。结果表明,该在位测量装置能够满足凸轮轴加工轮廓误差检测的精度要求。%An on-machine measurement device was proposed based on the USB bus technology and re-centering grating displacement sensor.Cam lift was measured directly on the grinding machine. The on-machine measuring principles and lift measuring process were studied.To solve the cam lift initial turning angle and get cam measured lift,the sensitive point method were used to process the measured lift data combining with cubic uniform B-spline interpolation fitting and least square meth-od.A grinded camshaft was measured by the on-machine measurement device and BG1310-10 cam contour detector,and the measuring results were compared to confirm the validity of the proposed de-v i c e .

  15. Fundamentals of grinding : surface conditions of ground WC-Co systems

    NARCIS (Netherlands)

    Hegeman, JBJW; De Hosson, JTM; Shulepov, SY; Lousberg, N; de With, G; Brebbia, CA; Kenny, JM

    1999-01-01

    This paper concentrates on the fundamentals of grinding of inorganic materials. A statistical grinding model was developed based on the topography of the grinding wheel. The results of the model are compared with the results of grinding experiments on WC-Co hardmetals. The calculated profiles and me

  16. Innovative grinding wheel design for cost-effective machining of advanced ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Licht, R.H.; Kuo, P.; Liu, S.; Murphy, D.; Picone, J.W.; Ramanath, S.

    2000-05-01

    This Final Report covers the Phase II Innovative Grinding Wheel (IGW) program in which Norton Company successfully developed a novel grinding wheel for cost-effective cylindrical grinding of advanced ceramics. In 1995, Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics using small prototype wheels. The Phase II program was initiated to scale-up the new superabrasive wheel specification to larger diameters, 305-mm to 406-mm, required for most production grinding of cylindrical ceramic parts, and to perform in-house and independent validation grinding tests.

  17. Grinding Properties of Abandoned Concrete

    Institute of Scientific and Technical Information of China (English)

    ZHENG Fang-yu; WANG Li-jiu; LI Qiang

    2007-01-01

    The grinding properties of abandoned concrete, which consists primarily of hardened cement, limestone aggregate and river sand, are studied. Theoretical models of grinding are used to explain the experimental observation. The results show that 1) The principle disintegration mechanism of hardened cement and river sand is volumetric grinding, although at later stages grinding of cement becomes difficult because of its flaked structure; 2) The limestone grinding process can be divided into two steps. First, volumetric grinding, with an obvious component of surface grinding, followed by primarily surface grinding as the micro-particle content increases; 3) Initially, the principle mechanism of grinding limestone and river sand is volumetric grinding, albeit less efficient grinding than if these components were ground separately, and; 4) After 10 to 20 min of grinding the grinding bottleneck phenomenon appears and after 20 min of grinding the content of micro-particles is large and surface grinding is the main mechanism while the particle size of the mixture is smaller than that of separately ground river sand and cement but bigger than that of separately ground limestone.

  18. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  19. Mirror Surface Grinding of Steel Bonded Carbides

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The steel bonded carbide, a composite material, is very difficult to be machined to a fine finish mirror surface. In this paper, an electrolytic in-process dressing (ELID) grinding with metallic bond super-hard abrasive wheel was developed for grinding steel bonded carbide GT35. Factors affecting ELID grinding performance were analyzed by an atomic force microscope (AFM). Based on the analysis of AFM topography of the fine ground mirror surface of the steel bonded carbide, a schematic diagram of the mechanism of micro-removal of the ground surface was described. The AFM topography also shows that the hard brittle carbide particles, on the surface of steel bonded carbide, were machined out by ductile cutting. Since the grinding cracks in the ground surface are due to temperature gradient, temperature distribution in the grinding area was analyzed by finite element method (FEM). Experimental results indicate that a good mirror surface with Ra<0.02pm can be obtained by the developed ELID grinding system.

  20. System Analysis of Flat Grinding Process with Wheel Face

    Directory of Open Access Journals (Sweden)

    T. N. Ivanova

    2014-01-01

    Full Text Available The paper presents a conducted system analysis of the flat grinding wheel face, considers the state parameters, input and output variables of subsystems, namely: machine tool, workpiece, grinding wheel, cutting fluids, and the contact area. It reveals the factors influencing the temperature and power conditions for the grinding process.Aim: conducting the system analysis of the flat grinding process with wheel face expects to enable a development of the system of grinding process parameters as a technical system, which will make it possible to evaluate each parameter individually and implement optimization of the entire system.One of the most important criteria in defining the optimal process conditions is the grinding temperature, which, to avoid defects appearance of on the surface of component, should not exceed the critical temperature values to be experimentally determined. The temperature criterion can be useful for choosing the conditions for the maximum defect-free performance of the mechanical face grinding. To define the maximum performance of defect-free grinding can also use other criteria such as a critical power density, indirectly reflecting the allowable thermal stress grinding process; the structure of the ground surface, which reflects the presence or absence of a defect layer, which is determined after the large number of experiments; flow range of the diamond layer.Optimal conditions should not exceed those of defect-free grinding. It is found that a maximum performance depends on the characteristics of circles and grade of processed material, as well as on the contact area and grinding conditions. Optimal performance depends on the diamond value (cost and specific consumption of diamonds in a circle.Above criteria require formalization as a function of the variable parameters of the grinding process. There is an option for the compromise of inter-criteria optimality, thereby providing a set of acceptable solutions, from

  1. Automotive crankshaft" axis linkage cut point tracking" servo grinding and its key technology%汽车曲轴的"三轴联动切点跟踪"随动磨床及其关键技术研究

    Institute of Scientific and Technical Information of China (English)

    黄兴红; 潘旭华; 吴兴; 黄文广

    2011-01-01

    在分析两轴联动切点跟踪曲轴随动磨削方法的技术缺陷基础上,系统地介绍了"三轴联动切点跟踪"磨削原理,给出了"三轴联动切点跟踪"曲轴随动磨削运动模型,概括了该原理在曲轴连杆颈和主轴颈磨削中的技术优势.并且通过高精度液体静压导轨、高刚性直线驱动技术和在线测量与误差补偿等关键技术的综合运用,成功地解决了超精密磨削加工中各运动部件动态性能及其对加工精度的影响,攻克了用普通刚玉砂轮高效率、高精度磨削曲轴主轴颈和连杆颈的技术难题.%Based on the analysis of two-axis servo cut point trackina crankshaft grinding method on the basis of technical defects, systematic introduction to the "axis linkage cut point tracking" grinding principle,gives the "cut point tracking axis linkage" with the crankshaft activity grinding motion model, summarizes the principles of the neck and the connecting rod in the crankshaft main journal grinding technology advantage. And by high-precision hydrostatic guideway, high rigidity straight line drive technology and online measurement and error compensation of the integrated use of key technologies, successfully resolves the ultra-precision grinding dynamic performance of the various moving parts and its impact on the machining accuracy, to capture a corundum wheel with ordinary high-effieiency, high precision grinding of the crankshaft main journal and connecting rod neck of technical problems.

  2. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  3. Nitramine Drying & Fine Grinding Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Nitramine Drying and Fine Grinding Facility provides TACOM-ARDEC with a state-of-the-art facility capable of drying and grinding high explosives (e.g., RDX and...

  4. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  5. [Optimization of dissolution process for superfine grinding technology on total saponins of Panax ginseng fibrous root by response surface methodology].

    Science.gov (United States)

    Zhao, Ya; Lai, Xiao-Pin; Yao, Hai-Yan; Zhao, Ran; Wu, Yi-Na; Li, Geng

    2014-03-01

    To investigate the effects of superfine comminution extraction technology of ginseng total saponins from Panax ginseng fibrous root, and to make sure the optimal extraction condition. Optimal condition of ginseng total saponins from Panax ginseng fibrous root was based on single factor experiment to study the effects of crushing degree, extraction time, alcohol concentration and extraction temperature on extraction rate. Response surface method was used to investigate three main factors such as superfine comminution time, extraction time and alcohol concentration. The relationship between content of ginseng total saponins in Panax ginseng fibrous root and three factors fitted second degree polynomial models. The optimal extraction condition was 9 min of superfine comminution time, 70% of alcohol, 50 degrees C of extraction temperature and 70 min of extraction time. Under the optimal condition, ginseng total saponins from Panax ginseng fibrous root was average 94. 81%, which was consistent with the predicted value. The optimization of technology is rapid, efficient, simple and stable.

  6. Technology development for safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Song, D. Y. [and others

    2005-04-01

    The objective of this project are to establish the safeguards technology of the nuclear proliferation resistance to the facilities which handle with high radioactivity nuclear materials like the spent fuel, to provide the foundation of the technical independency for the establishment of the effective management of domestic spent fuels, and to construct the base of the early introduction of the key technology relating to the back-end nuclear fuel cycle through the development of the safeguards technology of the DFDF of the nuclear non-proliferation. The essential safeguards technologies of the facility such as the measurement and account of nuclear materials and the C/S technology were carried out in this stage (2002-2004). The principal results of this research are the development of error reduction technology of the NDA equipment and a new NDA system for the holdup measurement of process materials, the development of the intelligent surveillance system based on the COM, the evaluation of the safeguardability of the Pyroprocessing facility which is the core process of the nuclear fuel cycle, the derivation of the research and development items which are necessary to satisfy the safeguards criteria of IAEA, and the presentation of the direction of the technology development relating to the future safeguards of Korea. This project is the representative research project in the field of the Korea's safeguards. The safeguards technology and equipment developed while accomplishing this project can be applied to other nuclear fuel cycle facilities as well as DFDF and will be contributed to increase the international confidence in the development of the nuclear fuel cycle facility of Korea and its nuclear transparency.

  7. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation......This chapter describes the present mainstream development of the wind turbine technology at present. The turbine technology development trend is characterized by up-scaling to turbines with larger capacity for both onshore and offshore applications, larger rotors and new drivetrain solution......, including the direct-drive solution without gearbox. The technology solutions are strongly influenced by the development of the international industry with a global market for components and a trend towards a “shared” development effort in collaboration between the OEM’s and component sub-suppliers. Wind...

  8. Study on the New Grinding Fluids of Oils on Water

    Institute of Scientific and Technical Information of China (English)

    魏源迁; 钱怡; 中村隆; 松原十三生

    2003-01-01

    To fulfill a zero-emission in the process of grinding and thoroughly eliminate the influences of the conventional grinding fluids on the eco-environment as well as save up electric energy and reduce in production costs, the new grinding fluids of botanic oils on water were developed, in which a lot of tiny water droplets attached with micro oil films were blown to the machining area by a compressing air-jet so good as to produce lubricating and cooling roles.In this study, grinding performances of the new fluids were investigated by comparison to the conventional ones such as emulsion on the plane NC grinder.

  9. Grinding and polishing of conformal windows and domes

    Science.gov (United States)

    Fess, Edward; Ross, James; Matthews, Greg

    2017-05-01

    Conformal optics require special manufacturing techniques to produce them to optical tolerances. In many cases the materials used are very hard optical ceramics that present additional manufacturing challenges due to their hardness and grain structure. OptiPro has developed grinding technologies such as OptiSonic grinding, as well as sub-aperture polishing technologies like UltraForm Finishing (UFF) to manufacture these challenging components. We have also developed a custom computer aided manufacturing (CAM) software package, ProSurf, to generate the complex tool paths for both grinding and polishing processes. One of the main advantages of ProSurf over traditional CAM software packages is that it uses metrology feedback for deterministic corrections. The metrology input can be obtained from OptiPro's 5-axis UltraSurf metrology system, which is capable of measuring these complex shapes to sub-micron accuracies. Through the development of these technologies much work has been performed in creating, measuring and analyzing the alignment fiducials or datum's used to qualify the location of the optical surfaces. Understanding the sensitivity of the optical surface to any datum misalignment is critical to knowing not only where the part is in space, but how good the optical surfaces are to each other. Working with the optical designer to properly tolerance surfaces to these datums is crucial. This paper will present the technologies developed by OptiPro to manufacture conformal windows as well as information related to the optical surfaces sensitivity to datums and how accurately those datums can be measured.

  10. Kinetic study of ferronickel slag grinding at variation of ball filling and ratio of feed to grinding balls

    Science.gov (United States)

    Sanwani, Edy; Ikhwanto, Muhammad

    2017-01-01

    The objective of this paper is to investigate the effect of ball filling and ratio of feed to grinding balls on the kinetic of grinding of ferronickel slag in a laboratory scale ball mill. The experiments were started by crushing the ferronickel slag samples using a roll crusher to produce -3 mesh (-6.7 mm) product. This product, after sampling and sample dividing processes, was then used as feed for grinding process. The grinding was performed with variations of ball filling and ratio of feed to grinding balls for 150 minutes. At every certain time interval, particle size analysis was carried out on the grinding product. The results of the experiments were also used to develop linear regression model of the effect of grinding variables on the P80 of the product. Based on this study, it was shown that P80 values of the grinding products declined sharply until 70 minutes of grinding time due to the dominant mechanism of impact breakage and then decreased slowly after 70 minutes until 150 minutes of grinding time due to dominant mechanism of attrition breakage. Kinetics study of the grinding process on variations of grinding ball filling showed that the optimum rate of formation of fine particles for 20%, 30%, 40% and 50% mill volume was achieved at a particle size of 400 µm in which the best initial rate of formation occurred at 50% volume of mill. At the variations of ratio of feed to grinding balls it was shown that the optimum rate of grinding for the ratio of 1:10, 1: 8 and 1: 6 was achieved at a particle size of 400 µm and for the ratio of 1: 4 was at 841 µm in which the best initial rate of formation occurred at a 1:10 ratio. In this study, it was also produced two regression models that can predict the P80 value of the grinding product as a function of the variables of grinding time, ball filling and the ratio of the feed to grinding balls.

  11. Insider protection technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Foesch, J.; Bortniak, P.; Waddoups, I.

    1994-08-01

    Sandia National Laboratories evaluates and develops new techniques and technologies to ensure the integrity of special nuclear material (SNM) against potential insider threats. We have evaluated several types of sensor technologies and subsystems to monitor and/or track materials and personnel. This past year`s effort has been directed at characterizing commercial developments that meet the Department of Energy`s (DOE) needs in some of these areas. Some of these evaluations are complete and some are still in progress. This paper discusses our work with infrared light (IR), radio frequency (RF), and RF proximity technologies. After these technologies are judged to be applicable to DOE`s needs, we incorporate them into the generic, real time, personnel tracking and material monitoring system.

  12. Mobile Router Technology Development

    Science.gov (United States)

    Ivancic, William D.; Stewart, David H.; Bell, Terry L.; Kachmar, Brian A.; Shell, Dan; Leung, Kent

    2002-01-01

    Cisco Systems and NASA have been performing joint research on mobile routing technology under a NASA Space Act Agreement. Cisco developed mobile router technology and provided that technology to NASA for applications to aeronautic and space-based missions. NASA has performed stringent performance testing of the mobile router, including the interaction of routing and transport-level protocols. This paper describes mobile routing, the mobile router, and some key configuration parameters. In addition, the paper describes the mobile routing test network and test results documenting the performance of transport protocols in dynamic routing environments.

  13. Experimental Research on Grinding Technology for an Oxide Lead-zinc Ore in Shanxi%陕西某氧化铅锌矿磨矿技术试验研究

    Institute of Scientific and Technical Information of China (English)

    缑明亮; 武俊杰; 杨柳

    2013-01-01

    The steel ball filling system of the ball mill has influence on the grinding fineness,argillization degree and grinding efficiency.Directed at the properties of this ore,through the two aspects of the filling amount and the ratio of different size of balls,the research on the grinding technology,grinding efficiency and argillization degree was carried on to find the optimal filling system.As a result,the optimal grinding condition was determined as the steel ball size of 30mm,29mm,27mm,18mm,15mm and the ratio of the ball weight as 5.89,5.51,46.56,19.4,12.64.Meanwhile,the filling amount is 10.56kg.This kind of filling system has the characteristics with high grinding efficiency and low degree of argillization,benefiting for the improvement of the mineral processing index.%球磨机钢球的充填制度对磨矿产品的细度、泥化程度,磨矿功效都会产生影响.本次试验研究针对陕西某氧化铅锌矿的性质特点,主要从钢球的充填量、不同钢球尺寸配比两方面进行磨矿技术研究,检测磨矿功效及泥化程度,找到较佳的钢球装填制度.最终确定的较佳的磨矿条件为:钢球尺寸30mm、29mm、27mm、18mm、15mm,钢球的重量百分配比依次为15.89、5.51、46.56、19.4、12.64,钢球的充填量为10.56kg.这样的钢球充填制度磨矿功效高,磨矿产品的泥化程度相对小,有利于提高选矿指标.

  14. Fusion development and technology

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, D.B.

    1992-01-01

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development.

  15. Technology maturity and technology development

    Energy Technology Data Exchange (ETDEWEB)

    Underhill, Gary K.; Carlson, Ronald A.; Clendinning, William A.; Erdos, Jozsef; Gault, John; Hall, James W.; Jones, Robert L.; Michael, Herbert K.; Powell, Paul H.; Riemann, Carl F.; Rios-Castellon, Lorenzo; Shepherd, Burchard P.; Wilson, John S.

    1976-01-01

    All of the work reported in the preceding chapters was performed in order to assess the technical, economic, and energetic feasibility of proceeding with more detailed studies of the geopressured geothermal resource. The preliminary conceptual design and costing activities represented the prime activity for component by component review of the maturity of the technology available for resource utilization facilities. The economics and energetics studies focussed attentions on the areas of major capital and energy investment; these results comprise a useful guide for focussing design in order to reduce initial and operations and maintenance costs and/or investment. The following presents a discussion of the primary technical problems identified.

  16. Laser-assisted Grinding Wheel Dressing (Ⅱ)-Experimental Researches

    Institute of Scientific and Technical Information of China (English)

    Ming CHEN; Fanghong SUN; Youngmoon LEE; Seunghan YANG; Jongchan LEE

    2003-01-01

    Most of the mechanical dressing technologies for resin bonded superabrasive grinding wheels are time consumingand costly. Based on the outcomes of the simulations in the previous study, this paper demonstrates the comprehensive researches on the laser-ass

  17. Paleo-tribology: development of wear measurement techniques and a three-dimensional model revealing how grinding dentitions self-wear to enable functionality

    Science.gov (United States)

    Erickson, Gregory M.; Sidebottom, Mark A.; Curry, John F.; Kay, David Ian; Kuhn-Hendricks, Stephen; Norell, Mark A.; Sawyer, W. Gregory; Krick, Brandon A.

    2016-06-01

    In most mammals and a rare few reptilian lineages the evolution of precise dental occlusion led to the capacity to form functional chewing surfaces due to pressures generated while feeding. The complex dental architectures of such teeth and the biomechanics of their self-wearing nature are poorly understood. Our research team composed of paleontologists, evolutionary biologists, and engineers have developed a protocol to: (1) determine the histological make-up of grinding dentitions in extant and fossil taxa; (2) ascertain wear-relevant material properties of the tissues; (3) determine how those properties relate to inter-tissue-biomechanics leading the dental functionality using a three-dimensional Archard’s wear model developed specifically for dental applications; (4) analyze those data in phylogenetic contexts to infer evolutionary patterns as they relate to feeding. Finally we discuss industrial applications that are emerging from our paleontologically-inspired research.

  18. Integrated Modeling and Intelligent Control Methods of Grinding Process

    Directory of Open Access Journals (Sweden)

    Jie-sheng Wang

    2013-01-01

    Full Text Available The grinding process is a typical complex nonlinear multivariable process with strongly coupling and large time delays. Based on the data-driven modeling theory, the integrated modeling and intelligent control method of grinding process is carried out in the paper, which includes the soft-sensor model of economic and technique indexes, the optimized set-point model utilizing case-based reasoning, and the self-tuning PID decoupling controller. For forecasting the key technology indicators (grinding granularity and mill discharge rate of grinding process, an adaptive soft-sensor modeling method based on wavelet neural network optimized by the improved shuffled frog leaping algorithm (ISFLA is proposed. Then, a set point optimization control strategy of grinding process based on case-based reasoning (CBR method is adopted to obtain the optimized velocity set-point of ore feed and pump water feed in the grinding process controlled loops. Finally, a self-tuning PID decoupling controller optimized is used to control the grinding process. Simulation results and industrial application experiments clearly show the feasibility and effectiveness of control methods and satisfy the real-time control requirements of the grinding process.

  19. High-speed, low-damage grinding of advanced ceramics Phase 1. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kovach, J.A. [Eaton Corp., Willoughby Hills, OH (United States). Mfg. Technologies Center; Malkin, S. [Univ. of Massachusetts (United States)

    1995-03-01

    In manufacture of structural ceramic components, grinding costs can comprise up to 80% of the entire manufacturing cost. Most of these costs arise from the conventional multi-step grinding process with numerous grinding wheels and additional capital equipment, perishable dressing tools, and labor. In an attempt to reduce structural ceramic grinding costs, a feasibility investigation was undertaken to develop a single step, roughing-finishing process suitable for producing high-quality silicon nitride ceramic parts at high material removal rates at lower cost than traditional, multi-stage grinding. This feasibility study employed combined use of laboratory grinding tests, mathematical grinding models, and characterization of resultant material surface condition. More specifically, this Phase 1 final report provides a technical overview of High-Speed, Low-Damage (HSLD) ceramic grinding and the conditions necessary to achieve the small grain depths of cut necessary for low damage grinding while operating at relatively high material removal rates. Particular issues addressed include determining effects of wheel speed and material removal rate on resulting mode of material removal (ductile or brittle fracture), limiting grinding forces, calculation of approximate grinding zone temperatures developed during HSLD grinding, and developing the experimental systems necessary for determining HSLD grinding energy partition relationships. In addition, practical considerations for production utilization of the HSLD process are also discussed.

  20. Remediation Technology Collaboration Development

    Science.gov (United States)

    Mahoney, John; Olsen, Wade

    2010-01-01

    This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

  1. Design and experimental study of a micro-groove grinding wheel with spray cooling effect

    Directory of Open Access Journals (Sweden)

    Shi Chaofeng

    2014-04-01

    Full Text Available The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl-shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200 °C, which means the developed grinding wheel makes cooling high efficient and low energy consuming.

  2. ABC Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-14

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: `Provide a weapon`s grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon`s grade plutonium to be disposed on in [20] years.` This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments.

  3. Research into Grinding Hardening of Microalloyed Non-quenched and Tempered Steel

    Institute of Scientific and Technical Information of China (English)

    HAN Zheng-tong; ZHANG Ning-ju; GAO Ding; YANG Gang

    2007-01-01

    Grinding hardening is a new technology of hardening steel piece surfaces with grinding heat generated in the grinding process instead of with a high or medium frequency induction heating method, which can effectively integrate grinding and surface hardening. Experimental studies were carried out on grinding hardening of non-quenched and tempered steel. Through grinding experiments with variable depths of cut and feeding rate, the variation in the depth of the hardening layer was studied and the microstructure of the hardening zone of the test pieces was subsequently analyzed. In the end, the hardening effect of non-quenched and tempered steel was compared with that of 40Cr steel, which revealed the superiority of non-quenched and tempered steel in grinding hardening technology.

  4. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  5. Textile technology development

    Science.gov (United States)

    Shah, Bharat M.

    1995-01-01

    The objectives of this report were to evaluate and select resin systems for Resin Transfer Molding (RTM) and Powder Towpreg Material, to develop and evaluate advanced textile processes by comparing 2-D and 3-D braiding for fuselage frame applications and develop window belt and side panel structural design concepts, to evaluate textile material properties, and to develop low cost manufacturing and tooling processes for the automated manufacturing of fuselage primary structures. This research was in support of the NASA and Langley Research Center (LaRc) Advanced Composite Structural Concepts and Materials Technologies for Primary Aircraft Structures program.

  6. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; R. Bratton

    2007-09-01

    This technology development plan is designed to provide a clear understanding of the research and development direction necessary for the qualification of nuclear grade graphite for use within the Next Generation Nuclear Plant (NGNP) reactor. The NGNP will be a helium gas cooled Very High Temperature Reactor (VHTR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Considerable effort will be required to ensure that the graphite performance is not compromised during operation. Based upon the perceived requirements the major data needs are outlined and justified from the perspective of reactor design, reatcor performance, or the reactor safety case. The path forward for technology development can then be easily determined for each data need. How the data will be obtained and the inter-relationships between the experimental and modeling activities will define the technology development for graphite R&D. Finally, the variables affecting this R&D program are discussed from a general perspective. Factors that can significantly affect the R&D program such as funding, schedules, available resources, multiple reactor designs, and graphite acquisition are analyzed.

  7. ECH Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Temkin, Richard [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2014-12-24

    Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

  8. Eco-efficiency of grinding processes and systems

    CERN Document Server

    Winter, Marius

    2016-01-01

    This research monograph aims at presenting an integrated assessment approach to describe, model, evaluate and improve the eco-efficiency of existing and new grinding processes and systems. Various combinations of grinding process parameters and system configurations can be evaluated based on the eco-efficiency. The book presents the novel concept of empirical and physical modeling of technological, economic and environmental impact indicators. This includes the integrated evaluation of different grinding process and system scenarios. The book is a valuable read for research experts and practitioners in the field of eco-efficiency of manufacturing processes but the book may also be beneficial for graduate students.

  9. Effects of the grinding process on the preparation and qualities of CWS

    Institute of Scientific and Technical Information of China (English)

    Yuliang Zhang; Guoguang Wu; Xianliang Meng; Zengjie Yun; Frank Shi; Yaqun He; Xiaoqiang Luo

    2011-01-01

    Two different grinding processes were examined to determine the effect grinding has on the quality of a CWS.A series of slurries was prepared from Australian (Au) and Chinese (YZ) coals.Both types of coal were ground by a Chinese (CUMT) and an Australian (JK) grinding process.The performance tests of the prepared CWS showed that fluidity of all slurries was acceptable.The concentration of the CWS from YZ coal ground by the CUMT grinding process was higher than when the JK grinding process was used.The highest concentration was 70.14% in this case.The concentration of the CWS prepared from Au coal by the JK grinding process was higher than when the CUMT grinding process was used.The highest concentration in this case was 70.97%.These differences are caused by the particle size distribution developed during the different grinding processes.

  10. Investigations of spherical grinding parameters on circularity error, finished diameter, and grinding forces for porous polyurethane foam

    Directory of Open Access Journals (Sweden)

    Isarawit Chaopanich

    2010-07-01

    Full Text Available The aim of this study was to examine the effect of grinding variables on the circularity error, finished diameter, andgrinding forces of porous polyurethane foam (PPUF. A cube of PPUF having the size of 21 mm was transformed into a roundshape using a vertical wheel grinding with the circular groove pad developed. The grinding speed (Vs of the wheel wasvaried between 1.41 and 5.18 m/s. The cross head speed of the circular groove pad (f was controlled at 1, 3, 5 mm/min. Theabrasive grit size (A of 20 and 53 μm made of silicon carbide were applied. Two replications of experiment were randomlyperformed. Diameter and circularity error of the ground specimen were determined by vision measuring machine. The tangentialand normal forces of grinding were obtained using a dynamometer. The experimental data were statistically analyzed. The study found that (1 the grinding speed could remarkably affect the circularity error, finished diameter, and grinding forces,(2 the grinding speed ranged between 2.83 and 3.77 m/s could contribute to sphere shape specimens, and (3 the grinding speed of 3.30 m/s, cross head speed of 1 mm/min, and abrasive grit size of 20 μm provided the least circularity error.

  11. Application of cryogenic grinding to achieve homogenization of transuranic wastes

    Energy Technology Data Exchange (ETDEWEB)

    Atkins, W.H.; Hill, D.D.; Lucero, M.E.; Jaramillo, L.; Martinez, H.E. [and others

    1996-08-01

    This paper describes work done at Los Alamos National Laboratory (LANL) in collaboration with the Department of Energy Rocky Flats Field Office (DOE/RFFO) and with the National Institute of Standards and Technology (NIST), Boulder, Colorado. Researchers on this project have developed a method for cryogenic grinding of mixed wastes to homogenize and, thereby, to acquire a representative sample of the materials. There are approximately 220,000 waste drums owned by the Rocky Flats Environmental Technology Site (RFETS)-50,000 at RFETS and 170,000 at the Idaho National Engineering Laboratory. The cost of sampling the heterogeneous distribution of waste in each drum is prohibitive. In an attempt to produce a homogeneous mixture of waste that would reduce greatly the cost of sampling, researchers at NIST and RFETS are developing a cryogenic grinder. The Los Alamos work herein described addresses the implementation issues of the task. The first issue was to ascertain whether samples of the {open_quotes}small particle{close_quotes} mixtures of materials present in the waste drums at RFETS were representative of actual drum contents. Second, it was necessary to determine at what temperature the grinding operation must be performed in order to minimize or to eliminate the release of volatile organic compounds present in the waste. Last, it was essential to evaluate any effect the liquid cryogen might have on the structural integrity and ventilation capacity of the glovebox system. Results of this study showed that representative samples could be and had been obtained, that some release of organics occurred below freezing because of sublimation, and that operation of the cryogenic grinding equipment inside the glovebox was feasible.

  12. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; M.Carroll

    2010-10-01

    The Next Generation Nuclear Plant (NGNP) will be a helium-cooled High Temperature Gas Reactor (HTGR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Graphite has been used effectively as a structural and moderator material in both research and commercial high-temperature gas-cooled reactors. This development has resulted in graphite being established as a viable structural material for HTGRs. While the general characteristics necessary for producing nuclear grade graphite are understood, historical “nuclear” grades no longer exist. New grades must be fabricated, characterized, and irradiated to demonstrate that current grades of graphite exhibit acceptable non-irradiated and irradiated properties upon which the thermomechanical design of the structural graphite in NGNP is based. This Technology Development Plan outlines the research and development (R&D) activities and associated rationale necessary to qualify nuclear grade graphite for use within the NGNP reactor.

  13. Study on Effect of Ultrasonic Vibration on Grinding Force and Surface Quality in Ultrasonic Assisted Micro End Grinding of Silica Glass

    Directory of Open Access Journals (Sweden)

    Zhang Jianhua

    2014-01-01

    Full Text Available Ultrasonic vibration assisted micro end grinding (UAMEG is a promising processing method for micro parts made of hard and brittle materials. First, the influence of ultrasonic assistance on the mechanism of this processing technology is theoretically analyzed. Then, in order to reveal the effects of ultrasonic vibration and grinding parameters on grinding forces and surface quality, contrast grinding tests of silica glass with and without ultrasonic assistance using micro radial electroplated diamond wheel are conducted. The grinding forces are measured using a three-component dynamometer. The surface characteristics are detected using the scanning electron microscope. The experiment results demonstrate that grinding forces are significantly reduced by introducing ultrasonic vibration into conventional micro end grinding (CMEG of silica glass; ultrasonic assistance causes inhibiting effect on variation percentages of tangential grinding force with grinding parameters; ductile machining is easier to be achieved and surface quality is obviously improved due to ultrasonic assistance in UAMEG. Therefore, larger grinding depth and feed rate adopted in UAMEG can lead to the improvement of removal rate and machining efficiency compared with CMEG.

  14. 基于热像检测与分割技术的磨削砂轮堵塞检测研究%Research on Grinding Wheel Loading Detection Based on Thermogram Detection and Segmentation Technology

    Institute of Scientific and Technical Information of China (English)

    郭力; 江志顺; 尚振涛

    2016-01-01

    According to the grinding wheel loading detection problems,a method was proposed for detecting the grinding wheel loading based on the active infrared detection technology and the therG mogram segmentation technology.Three methods including the threshold segmentation,the edge deG tection and the region growing were used to segment the thermogram,the features like the amounts and states of the grinding wheel loading were extracted.The experimental results show that:the disG tribution of the grinding wheel loading swarf extracted by the threshold segmentation method presents a “segregation”phenomenon,and the selected threshold value is affected the loading features deeply. The edge detection method has overcome the “segregation”phenomenon,but there still exist some problems such as the edge is not complete and the positioning of the edge is not accurate.The results of the RGS method based on the gradient threshold filtering are more objective and accurate.The test result errors of the grinding wheel loading detection between the RGS method and the microscopic photography were given.The RGS method can realize active quantitative detection of the grinding wheel loading.%针对磨削加工中的砂轮堵塞检测的难题,提出了一种基于主动红外检测技术和热像图分割技术的砂轮堵塞检测方法。分别运用阈值分割、边缘检测和区域生长三种方法分割热像图,提取了砂轮堵塞量和状态的特征。实验结果表明:阈值分割法提取的砂轮堵塞磨屑的分布出现“偏聚”现象,堵塞特征受选取的阈值影响较大;边缘检测法克服了“偏聚”现象,但仍存在边缘不完整、定位不精确等问题;而基于梯度阈值过滤的区域生长分割法检测结果更客观和准确。把基于梯度阈值过滤的区域生长分割法的砂轮堵塞红外检测结果与显微照相法的砂轮堵塞检测结果进行了分析比较,结果表明基于梯度阈值过滤的

  15. Payload software technology: Software technology development plan

    Science.gov (United States)

    1977-01-01

    Programmatic requirements for the advancement of software technology are identified for meeting the space flight requirements in the 1980 to 1990 time period. The development items are described, and software technology item derivation worksheets are presented along with the cost/time/priority assessments.

  16. Development of sodium technology

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Sung Tai; Nam, H. Y.; Choi, Y. D. [and others

    2000-05-01

    The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, {tau}{sub c} = {delta}{center_dot}g{sup -0.83}{center_dot}10{sup (3570/T{sub Na}-3.34)}, in 400-500 deg C of liquid sodium atmosphere. The characteristics

  17. Technology Development of Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Ko, W. I. (and others)

    2007-04-15

    The objective of this project is to perform R and D on the essential technologies in nuclear material measurement and surveillance and verification system, and to improve the state of being transparent on the nuclear material management of DUPIC Fuel Development Facility (DFDF) through the evaluation of safeguard ability on non-proliferation fuel cycle and nuclear proliferation resistance. Nuclear material position scan system for the reduction of measurement error was developed for the spatial distribution search of spent fuel in DUPIC facility. Web-based realtime remote monitoring system was designed and constructed for satisfying the IAEA's performance criteria of continuous monitoring, and also developed a software for the function of remote control and message. And diversion paths in a proliferation resistant pyroprocess for SFR were analyzed and its protecting system against the diversion paths were suggested for enhancing proliferation resistance of advanced nuclear fuel cycle. These results could be used for planning the further R and D items in the area of safeguards. Those R and D results mentioned above would be helpful for increasing Korean nuclear transparency in the future.

  18. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  19. Advanced Adaptive Optics Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Olivier, S

    2001-09-18

    The NSF Center for Adaptive Optics (CfAO) is supporting research on advanced adaptive optics technologies. CfAO research activities include development and characterization of micro-electro-mechanical systems (MEMS) deformable mirror (DM) technology, as well as development and characterization of high-resolution adaptive optics systems using liquid crystal (LC) spatial light modulator (SLM) technology. This paper presents an overview of the CfAO advanced adaptive optics technology development activities including current status and future plans.

  20. Research on the Monitoring System of CNC Grinding Process Based on Acoustic Emission

    Institute of Scientific and Technical Information of China (English)

    HU Zhongxiang; TENG Jiaxu; YANG Junwei; HUO Xiaojing; SHI Xiaojun

    2006-01-01

    Using on-line monitoring during the CNC grinding process, the hazard case such as the crushing of grinding wheel and various safety accidents could be avoided, and the optimum time for dressing and replacing grinding wheel could also be determined, and hence, the service life of the grinding wheel could be prolonged and grinding quality could be improved. To overcome the limitation of some traditional techniques in which some parameters including the grinding power and force, torque and so on were monitored, the acoustic emission (AE) technique, which provides high sensitivity and responding speed, were developed in the present paper. The mechanism of AE during grinding was reviewed. Moreover, a virtual AE monitoring system, which could monitor the grinding state under different working conditions during the grinding, has been developed based on the Virtual Instruments technique. Some experiments were also performed on the internal grinder. The results showed that the AE signals became stronger with increasing the main shaft speed and grinding depth or decreasing the distance between the AE sensor and grinding area.

  1. MELTED BUTTER TECHNOLOGY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2014-01-01

    Full Text Available Summary. Melted butter is made from dairy butter by rendering the fat phase. It has specific taste and aroma, high-calorie content and good assimilability. Defects of butter which appeared during the storage causes by the development of microbiological processes or by the chemical oxidation. On the development of these processes influence quality and composition of fresh butter, its physical structure, content of the increased amount of gas phase and content of heavy metals, storage conditions. Microbiological spoilage of butter occurs generally due to damage of plasma which is good environment for the development of microorganisms. Defects of microbiological origin include: unclean, sour, moldy, yeasty, cheesy, bitter taste. Defects of test and smell chemical origin are formed due to hydrolytic digestion of lipids. It's prevailed at long storage of butter in the conditions of freezing temperatures. It's picked out the following main processes of spoiling: souring, acidifying and sallowness. Often these processes take place simultaneously.It has been investigated melted butter with lactated additive. The latter improves the microbiological and toxicological safety, prolongs the storage condition of the products. Technological efficiency of the additives is achieved by a multilayer products formation from the inactive bound water, preventing microorganisms growth and by the barrier layer with lactate inhibiting hydrolytic reactions. Oil samples were obtained with the batch-type butter maker application, then they were melted and after that lactated additive were supplemented. It has been studied organoleptic and physico-chemical indices of the melted butter samples. The fatty-acid composition of melted butter were studied. Comparative analysis of fatty-acid composition of cow's milk fat and produced melted butter has shown their similarity. Also in the last sample there is increased weight fraction of linoleic and linolenic acids. The obtained

  2. PRINCIPLES OF RE-ENGINEERING METHODOLOGY FOR TECHNOLOGICAL PROCESS IN PROCESSING OF RAW MATERIAL COMPONENTS WHILE PRODUCING CEMENT AND SILICATE PRODUCTS

    Directory of Open Access Journals (Sweden)

    I. A. Busel

    2014-01-01

    Full Text Available Grinding process is characterized by high energy consumption and low productivity. Nowadays efficiency of the ball mills applied for grinding is rather low. Only 3-6 % of the supplied power energy is used for material grinding. The rest part of the energy disappears in the form of heat, vibration and noise. So matter concerning reduction of energy consumption is of great importance.Improvement of efficiency and quality of technological process in grinding of raw material components while producing construction materials is considered as one of priority-oriented targets of power- and resource saving in construction industry with the purpose to reduce energy consumption for grinding. Grinding efficiency at operating enterprises is reasonable to improve by modernization of the equipment and existing technological, management and other processes which are related to grinding of mineral raw material. In order to reduce grinding power consumption it is necessary to carry out a complex re-engineering of technological process in grinding of various materials which is based on usage of new modifications of grinding bodies, physical and chemical grinding aids, modern information technologies and industrial automation equipment. Application of modern information technologies and industrial automation equipment makes it possible to execute the grinding process with maximum achievable productivity for existing capacity due to automatic control and consideration of continuous changes in technological parameters. In addition to this such approach gives an opportunity to control processes in real time by immediate adjustments of technological equipment operational modes.The paper considers an approach to the development of re-engineering methodology for technological process in grinding of raw material components while producing construction materials. The present state of technological grinding process is presented in the paper. The paper points out the

  3. China's Spacecraft Technology Developing Steadily

    Institute of Scientific and Technical Information of China (English)

    Ren Shufang

    2008-01-01

    @@ 2008 sees the 40th anniversary of China Academy of Space Technology (CAST).As the main satellite manufacture base,CAST has overcome many difficulties in the field of space technology,achieved project approval for several major space science and technology programs,and made many breakthroughs in core technologies and key technologies with its own intellectual property rights in 40 years development.

  4. Nigerian Journal of Technological Development

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Development is a biannual publication of the Faculty of Engineering & Technology, University of Ilorin, Ilorin, Nigeria. ... Mechanical properties of millet husk ash bitumen stabilized soil block · EMAIL ...

  5. 发动机凸轮轴磨削变形补偿技术研究%Compensation Technology of Grinding Deformation for Engine Camshaft

    Institute of Scientific and Technical Information of China (English)

    刘勇军; 范晋伟; 李云

    2013-01-01

    针对发动机凸轮轴数控磨削时产生连续变化的弹性变形问题,分析了凸轮轴受到磨削力变形对凸轮轮廓精度的影响,对轴向和径向变形进行了解耦,推导了不同位置、不同相位下凸轮受力变形量求解方程.分析了数控凸轮轴磨床的插补原理,建立了含有变形量误差的、工件旋转轴和砂轮进给轴联动的磨削运动学方程,提出了X轴变形量与理论插补值进行几何叠加的指令修正误差补偿方法.对某发动机进排气凸轮轴磨削变形进行了建模与仿真,对数控凸轮轴磨床进行了补偿与加工试验,仿真与加工试验结果均表明磨削变形补偿可以将凸轮轴的轮廓精度提高5 μm.%To solve the camshaft's deformation compressed by the continuous and variable force when grinding,the influence of grinding force on the cam's curve accuracy was analyzed.The axial deformation and radial deformation were decoupled.The deformation value solution equation in variable position and angle was deduced.The interpolation principle of the CNC (computer numerical control) camshaft grinder was analyzed.The X-C linkage kinematics equation which included deformation errors,workpiece rotation axis,and grinding wheel axis was built.The soft error compensation manner by adding the errors to the interpolation value was proposed.The deformation error of one intake-exhaust camshaft was modeled and simulated.The CNC camshaft grinder was compensated and the manufacturing test was executed.The simulation and manufacturing result showed that camshaft's contours accuracy was improved 5 μm by the deformation compensation.

  6. A Path Planning Method for Robotic Belt Surface Grinding

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; YUN Chao

    2011-01-01

    The flexible contact and machining with wide strip are two prominent advantages for the robotic belt grinding system,which can be widely used to improve the surface quality and machining efficiency while finishing the workpieces with sculptured surfaces.There lacks research on grinding path planning with the constraint of curvature.With complicated contact between the contact wheel and the workpiece,the grinding paths for robot can be obtained by the theory of contact kinematics.The grinding process must satisfy the universal demands of the belt grinding technologies,and the most important thing is to make the contact wheel conform to the local geometrical features on the contact area.For the local surfaces with small curvature,the curve length between the neighboring cutting locations becomes longer to ensure processing efficiency.Otherwise,for the local areas with large curvature,the curve length becomes shorter to ensure machining accuracy.A series of planes are created to intersect with the target surface to be ground,and the corresponding sectional profile curves are obtained.For each curve,the curve length between the neighboring cutting points is optimized by inserting a cutter location at the local area with large curvatures.A method of generating the grinding paths including curve length spacing optimization is set up.The validity is completely approved by the off-line simulation,and during the grinding experiments with the method,the quality of surface is improved.The path planning method provides a theoretical support for the smooth and accuracy path of robotic surface grinding.

  7. Gemstone Grinding Process Improvement by using Impedance Force Control

    Directory of Open Access Journals (Sweden)

    Hamprommarat Chumpol

    2015-01-01

    Full Text Available Chula Automatic Faceting Machine has been developed by The Advance Manufacturing Research Lab, Chulalongkorn University to support Thailand Gems-Industry. The machine has high precision motion control by using position and force control. A contact stiffness model is used to estimate grinding force. Although polished gems from the Faceting Machine have uniform size and acceptable shape, the force of the grinding and polishing process cannot be maintain constant and has some fluctuation due to indirect force control. Therefor this research work propose a new controller for this process based on an impedance direct force control to improve the gemstone grinding performance during polishing process. The grinding force can be measured through motor current. The results show that the polished gems by using impedance direct force control can maintain uniform size as well as good shape and high quality surface.

  8. A critical study of high efficiency deep grinding

    CERN Document Server

    Johnstone, I

    2002-01-01

    The recent years, the aerospace industry in particular has embraced and actively pursued the development of stronger high performance materials, namely nickel based superalloys and hardwearing steels. This has resulted in a need for a more efficient method of machining, and this need was answered with the advent of High Efficiency Deep Grinding (HEDG). This relatively new process using Cubic Boron Nitride (CBN) electroplated grinding wheels has been investigated through experimental and theoretical means applied to two widely used materials, M50 bearing steel and IN718 nickel based superalloy. It has been shown that this grinding method using a stiff grinding centre such as the Edgetek 5-axis machine is a viable process. Using a number of experimental designs, produced results which were analysed using a variety of methods including visual assessment, sub-surface microscopy and surface analysis using a Scanning Electron Microscope (SEM), residual stress measurement using X-Ray Diffraction (XRD) techniques, Ba...

  9. Developing human technology curriculum

    Directory of Open Access Journals (Sweden)

    Teija Vainio

    2012-10-01

    Full Text Available During the past ten years expertise in human-computer interaction has shifted from humans interacting with desktop computers to individual human beings or groups of human beings interacting with embedded or mobile technology. Thus, humans are not only interacting with computers but with technology. Obviously, this shift should be reflected in how we educate human-technology interaction (HTI experts today and in the future. We tackle this educational challenge first by analysing current Master’s-level education in collaboration with two universities and second, discussing postgraduate education in the international context. As a result, we identified core studies that should be included in the HTI curriculum. Furthermore, we discuss some practical challenges and new directions for international HTI education.

  10. Robotics Technology Development Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  11. New Space Technology Development

    Science.gov (United States)

    Mueller, Rob

    2014-01-01

    Visitors from Moon Express, a privately funded commercial space company, will be visiting KSC Swamp Works. This presentation includes a high-level introduction to NASA and commercial partnerships, as well as brief background on the moon - what we used to think about it hundreds of years ago, and what we know today with advanced technologies.***This third part being added includes Swamp Works technical capabilities and has a high-level overview of a selection of projects.***

  12. Application of Superfine Grinding Technology in the Extraction of Natural Products%超微粉碎技术在天然产物提取中的应用

    Institute of Scientific and Technical Information of China (English)

    岳贤田; 杨继亮

    2015-01-01

    超微粉碎技术是一种新型食品加工技术,在天然产物的提取过程中有广泛的应用,对超微粉碎技术的原理及其在天然产物多糖、有机酸、黄酮、皂苷、挥发油、色素、膳食纤维的提取方面进行了阐述,以便于广大科技工作者更好地开展天然产物提取方面的工作。%superfine grinding technology was a new kind of food processing technology ,it had widespread application in the extraction process of natural products.In this paper ,extraction of the superfine gringding technology principle and its application in nature products,such as polysaccharides,organic acids,flavonoide, saponins,volatile oil,pigment,dietary fiber were described.In order to facilitate scientific and technological workers to better carry out the work of natural product extraction.

  13. Chemical technology for appropriate development

    NARCIS (Netherlands)

    Van Brakel, J.

    1978-01-01

    'Chemical technology for appropriate development' is basicly a critical review of the literature. It gives a conceptual analysis of so called appropriate technology and the choice of production systems for less-development countries. The role of about 40 organizations active in this emerging field

  14. Technological development in fisheries management

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Marchal, Paul; Gislason, Henrik

    2014-01-01

    increases by 3.2% per year due to technological developments, an increase often ignored in fisheries management. The documentation and quantification of technological creep improves the basis for successfully integrating the effects of technological development (and catchability changes) in fisheries...... management regulations and policies. Ways of counteracting the undesired effects of technological creep are discussed as are the potential management benefits from improved fishing technology. Specific suggestions are given on the selection, application, and tuning of fisheries management tools that can......Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism...

  15. Reseach on Mill-grinding Experiment of Grinding Wheel with Phyllotactic Pattern%磨粒族叶序排布砂轮的铣磨实验研究

    Institute of Scientific and Technical Information of China (English)

    王军; 赵良兵; 赵成义; 吕玉山

    2013-01-01

    In order to realize the ordering of the grinding wheel abrasive surface assignment, this paper combined with phyllotaxis theory and grinding mechanism, and manufactured phyllotactic pattern grinding wheel by UV lithography method and electroplating technology. The mill-grinding experiment results show that; the grinding performance of phyllotactic pattern grinding wheel is superior to what of disordered arrangement grinding wheel.%为了实现砂轮表面磨料排布的有序化,本文将仿生学叶序理论与磨削机理相结合,利用光刻技术和复合电镀技术制备出了磨粒族叶序排布砂轮.铣磨实验结果表明:磨粒族叶序排布砂轮的磨削性能优于普通无序排布砂轮.

  16. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    Routines in daily life are crucial for consumption by households of energy and water and therefore knowledge of how routines develop and change is extremely relevant from a sustainable consumption perspective. Routines emerge, develop and change in close relation with different kinds of everyday ...

  17. Nigerian journal of technology

    African Journals Online (AJOL)

    student1

    sieved into abrasive grains that were used to produce the grinding wheels. These locally ... Nigerian Journal of Technology (NIJOTECH). Vol. 32. No. 2. July 2013, pp. 318 – 324 ..... [10] Salmon, S. C. Modern Grinding Process. Technology.

  18. Bruxism (Teeth Grinding or Clenching) (For Parents)

    Science.gov (United States)

    ... Old Feeding Your 1- to 2-Year-Old Bruxism (Teeth Grinding or Clenching) KidsHealth > For Parents > Bruxism ( ... called bruxism , which is common in kids. About Bruxism Bruxism is the medical term for the grinding ...

  19. Developing and Evaluating Collaborative Technologies

    Science.gov (United States)

    2005-11-01

    undertaking. This paper considers the topic of assessing collaborative technologies in the context of military logistics . A historical view of collaborative...research in military logistics is provided, as well as a discussion of current research aimed at developing a framework for assessing collaborative technologies.

  20. AND TECHNOLOGY FOR NATIONAL DEVELOPMENT

    African Journals Online (AJOL)

    women should be part and parcel of her science and technology development. Nige- rian's effort .... based courses in University of Nigeria alone in 2000/2003 session. University of. 19 .... der, physical disability, limited English language ability.

  1. "Grinding" cavities in polyurethane foam

    Science.gov (United States)

    Brower, J. R.; Davey, R. E.; Dixon, W. F.; Robb, P. H.; Zebus, P. P.

    1980-01-01

    Grinding tool installed on conventional milling machine cuts precise cavities in foam blocks. Method is well suited for prototype or midsize production runs and can be adapted to computer control for mass production. Method saves time and materials compared to bonding or hot wire techniques.

  2. Multichip module technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kapustinsky, J.S.; Boissevain, J.G.; Muck, R.C.; Smith, G.D.; Wong-Swanson, B.G.; Ziock, H.J.

    1997-10-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). A Multichip Module (MCM) was designed and submitted for fabrication to the Lockheed Martin foundry using a licensed process called High Density Interconnect (HDI). The HDI process uses thin film techniques to create circuit interconnect patterns on multiple layers of dielectric film which are deposited directly on top of unpackaged electronic die. This results in an optimally small package that approaches the area of the bare die themselves. This project tested the capability of the Lockheed Martin foundry to produce, in an HDI process, a complex mixed-mode (analog and digital) circuit on a single MCM substrate.

  3. Insensitive control technology development

    Science.gov (United States)

    Harvey, C. A.; Pope, R. E.

    1978-01-01

    THe investigation of two insensitive controller synthesis techniques was reported. The finite dimensional inverse approach produces a time varying insensitive controller and/or parameter identifier by constructing inverse functions derived from a finite number of input output pair relationships. The MD/IM concept relies on the information matrix theory that was developed in the estimation and identification field. The MD/IM synthesis technique is based on the hypothesis that minimizing the information matrix will reduce system identifiability and consequently system sensitivity to uncertain parameters. The controllers designed with both techniques were evaluated on a realistic C-5A aircraft flight control problem. Results indicate that the FDI controller is more suited to trajectory type problems because of its time varying nature. The MD/IM controller performed as well as the top-rated controllers of the initial effort and has direct application to aircraft flight control problems.

  4. Robotic Instrument for Grinding Rocks Into Thin Sections (GRITS)

    Science.gov (United States)

    Paulsen, Gale; Zacny, Kris; Dreyer, Christopher B.; Szucs, Attila; Szczesiak, Matt; Santoro, Chris; Craft, Jack; Hedlund, Magnus; Skok, John

    2013-06-01

    We have developed a rock grinding and polishing mechanism for in situ planetary exploration based on abrasive disks, called Grinding Rocks Into Thin Sections (GRITS). Performance characteristics and design considerations of GRITS are presented. GRITS was developed as part of a broader effort to develop an in situ automated rock thin section (ISARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. GRITS may also be useful to other planetary science missions with in situ instruments in which rock surface preparation are necessary.

  5. Working Environment and Technological Development

    DEFF Research Database (Denmark)

    Clausen, Christian; Nielsen, Klaus T.; Jensen, Per Langaa

    1997-01-01

    The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions and their and their conc......The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions...... and their and their concept of working environment2) Technology renewal, which considers the role of the working environment in connection with the development and use of concrete technologies3) Working environment planning, which considers the existing efforts to place the working environment in a planning process....

  6. Nano finish grinding of brittle materials using electrolytic in-process dressing (ELID) technique

    Indian Academy of Sciences (India)

    M Rahman; A Senthil Kumar; H S Lim; K Fatima

    2003-10-01

    Recent developments in grinding have opened up new avenues for finishing of hard and brittle materials with nano-surface finish, high tolerance and accuracy. Grinding with superabrasive wheels is an excellent way to produce ultraprecision surface finish. However, superabrasive diamond grits need higher bonding strength while grinding, which metal-bonded grinding wheels can offer. Truing and dressing of the wheels are major problems and they tend to glaze because of wheel loading. When grinding with superabrasive wheels, wheel loading can be avoided by dressing periodically to obtain continuous grinding. Electrolytic inprocess dressing (ELID) is the most suitable process for dressing metal-bonded grinding wheels during the grinding process. Nano-surface finish can be achieved only when chip removal is done at the atomic level. Recent developments of ductile mode machining of hard and brittle materials show that plastically deformed chip removal minimizes the subsurface damage of the workpiece. When chip deformation takes place in the ductile regime, a defect-free nano-surface is possible and it completely eliminates the polishing process. ELID is one of the processes used for atomic level metal removal and nano-surface finish. However, no proper and detailed studies have been carried out to clarify the fundamental characteristics for making this process a robust one. Consequently, an attempt has been made in this study to understand the fundamental characteristics of ELID grinding and their influence on surface finish.

  7. THERMAL STUDY ON THE GRINDING OF GRANITE WITH SUPERABRASIVE TOOLS

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In the present paer, a thermal study was conducted for the grinding of granite with diamond tools. Three types of grinding-straight surface grinding, deep grinding(circular sawing), and vertical spindle grinding-were studied. Some surface grinding tests were also conducted using a CBN(cubic boron nitride) wheel. Temperature distributions on the workpiece surface were measured using a foil thermocouple and the energy partition to the workpiece was estimated using a temperature matching method. The temperature for CBN surface grinding was found to be much higher than for diamond grinding. Energy partitions to the granite were 30%~36% for CBN surface grinding, 25%~32% for diamond surface grinding, about 53% for vertical spindle grinding, and 5.5%~9% for diamond deep grinding. The low energy partition value in deep grinding also suggested that more of the heat generated by grinding in this case can be conducted to the grinding tool and promote tool wear.

  8. Force Characteristics in Continuous Path Controlled Crankpin Grinding

    Institute of Scientific and Technical Information of China (English)

    ZHANG Manchao; YAO Zhenqiang

    2015-01-01

    Recent research on the grinding force involved in cylindrical plunge grinding has focused mainly on steady-state conditions. Unlike in conventional external cylindrical plunge grinding, the conditions between the grinding wheel and the crankpin change periodically in path controlled grinding because of the eccentricity of the crankpin and the constant rotational speed of the crankshaft. The objective of this study is to investigate the effects of various grinding conditions on the characteristics of the grinding force during continuous path controlled grinding. Path controlled plunge grinding is conducted at a constant rotational speed using a cubic boron nitride (CBN) wheel. The grinding force is determined by measuring the torque. The experimental results show that the force and torque vary sinusoidally during dry grinding and load grinding. The variations in the results reveal that the resultant grinding force and torque decrease with higher grinding speeds and increase with higher peripheral speeds of the pin and higher grinding depths. In path controlled grinding, unlike in conventional external cylindrical plunge grinding, the axial grinding force cannot be disregarded. The speeds and speed ratios of the workpiece and wheel are also analyzed, and the analysis results show that up-grinding and down-grinding occur during the grinding process. This paper proposes a method for describing the force behavior under varied process conditions during continuous path controlled grinding, which provides a beneficial reference for describing the material removal mechanism and for optimizing continuous controlled crankpin grinding.

  9. Evaluation of minimum quantity lubrication grinding with nano-particles and recent related patents.

    Science.gov (United States)

    Li, Changhe; Wang, Sheng; Zhang, Qiang; Jia, Dongzhou

    2013-06-01

    In recent years, a large number of patents have been devoted to developing minimum quantity lubrication (MQL) grinding techniques that can significantly improve both environmentally conscious and energy saving and costeffective sustainable grinding fluid alternatives. Among them, one patent is about a supply system for the grinding fluid in nano-particle jet MQL, which produced MQL lubricant by adding solid nano-particles in degradable grinding fluid. The MQL supply device turns the lubricant to the pulse drops with fixed pressure, unchanged pulse frequency and the same drop diameter. The drops will be produced and injected in the grinding zone in the form of jet flow under high pressure gas and air seal. As people become increasingly demanding on our environment, minimum quantity lubrication has been widely used in the grinding and processing. Yet, it presents the defect of insufficient cooling performance, which confines its development. To improve the heat transfer efficiency of MQL, nano-particles of a certain mass fraction can be added in the minimum quantity of lubricant oil, which concomitantly will improve the lubrication effects in the processing. In this study, the grinding experiment corroborated the effect of nano-particles in surface grinding. In addition, compared with other forms of lubrication, the results presented that the grinding force, the friction coefficient and specific grinding energy of MQL grinding have been significantly weakened, while G ratio greatly rose. These are attributed to the friction oil-film with excellent anti-friction and anti-wear performance, which is generated nano-particles at the wheel/workpiece interface. In this research, the cooling performance of nano-particle jet MQL was analyzed. Based on tests and experiments, the surface temperature was assayed from different methods, including flood lubricating oil, dry grinding, MQL grinding and nano-particle jet MQL grinding. Because of the outstanding heat transfer

  10. Titanium Aluminide Casting Technology Development

    Science.gov (United States)

    Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander

    2017-08-01

    Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.

  11. Coal Mining Machinery Development As An Ecological Factor Of Progressive Technologies Implementation

    Science.gov (United States)

    Efremenkov, A. B.; Khoreshok, A. A.; Zhironkin, S. A.; Myaskov, A. V.

    2017-01-01

    At present, a significant amount of energy spent for the work of mining machines and coal mining equipment on coal mines and open pits goes to the coal grinding in the process of its extraction in mining faces. Meanwhile, the increase of small fractions in mined coal does not only reduce the profitability of its production, but also causes a further negative impact on the environment and degrades labor conditions for miners. The countermeasure to the specified processes is possible with the help of coal mining equipment development. However, against the background of the technological decrease of coal mine equipment applied in Russia the negative impact on the environment is getting reinforced.

  12. Modeling and Simulation of Process-Machine Interaction in Grinding of Cemented Carbide Indexable Inserts

    Directory of Open Access Journals (Sweden)

    Wei Feng

    2015-01-01

    Full Text Available Interaction of process and machine in grinding of hard and brittle materials such as cemented carbide may cause dynamic instability of the machining process resulting in machining errors and a decrease in productivity. Commonly, the process and machine tools were dealt with separately, which does not take into consideration the mutual interaction between the two subsystems and thus cannot represent the real cutting operations. This paper proposes a method of modeling and simulation to understand well the process-machine interaction in grinding process of cemented carbide indexable inserts. First, a virtual grinding wheel model is built by considering the random nature of abrasive grains and a kinematic-geometrical simulation is adopted to describe the grinding process. Then, a wheel-spindle model is simulated by means of the finite element method to represent the machine structure. The characteristic equation of the closed-loop dynamic grinding system is derived to provide a mathematic description of the process-machine interaction. Furthermore, a coupling simulation of grinding wheel-spindle deformations and grinding process force by combining both the process and machine model is developed to investigate the interaction between process and machine. This paper provides an integrated grinding model combining the machine and process models, which can be used to predict process-machine interactions in grinding process.

  13. Development of Radiochemical Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B. (and others)

    2007-06-15

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future.

  14. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e.......g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  15. Dynamic Simulation Analysis of a New Grinding Wheel Dresser Based on Virtual Prototyping Technology%基于虚拟样机技术的新型砂轮修整器动力学仿真分析

    Institute of Scientific and Technical Information of China (English)

    孔振; 冯虎田; 陶卫军

    2011-01-01

    Dressing grinding wheel is the key factor to achieve high-precision and high-efficiency grinding,precisive and complex surface grinding,automated and intelligentized grinding. At first, different from the traditional grinding wheel dresser of series structure, a three DOF grinding wheel dresser based on parallel mechanism was designed, its motion function and working principle were described. Secondly the kinematics characteristics of grinding wheel dresser were analyzed, positive and negative solutions of its kinematics were analyzed and given. Finally, through comparison the results of the rigid-flexible coupling dynamic simulation and the rigid body dynamic simulation it demonstrates that its motion precision meets the requirement of dressing thc grinding wheel.%砂轮修整是实现高精高效磨削、精密复杂型面磨削、自动化智能化磨削的关健.首先,不同于传统的串联结构砂轮修整器结构,提出了一种基于并联机构的三自由度砂轮修整器,描迷了其运动功能与工作原理;其次,针对提出的砂轮修整器结构,对其运动学特性进行了分析,求出其机构运动学正解和反解的表达式;最后,通过刚柔耦合动力学仿真,并与刚体动力学仿真结果进行对比,结果表明,其能满足砂轮修整运动功能要求和运动精度要求.

  16. Advanced Mirror & Modelling Technology Development

    Science.gov (United States)

    Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

    2014-01-01

    The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

  17. Particle Size Distribution, Mineral Composition Distribution and Performance of Cement Prepared by Different Grinding Technology%不同粉磨工艺水泥的颗粒、矿物组成分布及性能

    Institute of Scientific and Technical Information of China (English)

    吴笑梅; 樊粤明; 郭文瑛

    2004-01-01

    研究了采用不同粉磨工艺制备的水泥的颗粒分布及矿物组成分布对水泥与混凝土物理性能的影响.研究结果表明:水泥颗粒分布与粉磨设备条件及工艺参数密切相关,选用高效选粉机,增大循环负荷及控制适当的比表面积,可获得较窄的颗粒分布;由于C3S易磨性较好,易富集于水泥细颗粒中,通过提高水泥颗粒的集中程度及适当增大比表面积,可有效地把熟料中的C3S富集于30μm以下的水泥颗粒中;当水泥熟料质量、混合材质量、水泥比表面积控制水平较接近,水泥颗粒分布集中(主要集中在5~30μm范围)时,水泥的标准稠度需水量较大,凝结时间较长,1 d强度较低,但3 d,28d抗压强度较高,在混凝土中则表现为新拌混凝土泌水较严重,1 d抗压强度偏低,3 d,28d抗压强度增幅较大.%The influences of the particle size distribution (PSD) and the mineral composition distribution of cement prepared by different grinding technology on the physical performances of cement and concrete were investigated. The results show that there is a close relationship between PSD and grinding conditions as well as grinding system parameters. Narrower PSD can be obtained by using the high-efficiency separator with higher circulating-load and proper specific surface area. With narrower PSD and higher specific surface area,most of C3 S in clinker can efficiently enrich in particles smaller than 30 μm, due to the good grindability and enrichment of C3S in cement particles. When the qualities of clinker and admixtures, as well as the specific surface area of cement are kept stable, narrower PSD ( most particles are in the size range of 0 ~ 30 μm)results in higher water demand for normal consistency of cement paste, longer setting time, lower 1-day compressive strength and higher 3- and 28-day compressive strengths. The concrete prepared from this cement will be of great bleeding and low 1-day compressive strength and

  18. Lost circulation technology development status

    Energy Technology Data Exchange (ETDEWEB)

    Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Scott, D.D.; Wernig, M.D.; Wright, E.K.

    1992-07-01

    Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50% through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April 1991--March 1992. 8 refs.

  19. Method for grinding precision components

    Science.gov (United States)

    Ramanath, Srinivasan; Kuo, Shih Yee; Williston, William H.; Buljan, Sergej-Tomislav

    2000-01-01

    A method for precision cylindrical grinding of hard brittle materials, such as ceramics or glass and composites comprising ceramics or glass, provides material removal rates as high as 19-380 cm.sup.3 /min/cm. The abrasive tools used in the method comprise a strong, light weight wheel core bonded to a continuous rim of abrasive segments containing superabrasive grain in a dense metal bond matrix.

  20. An efficient, robust, and inexpensive grinding device for herbal samples like Cinchona bark

    DEFF Research Database (Denmark)

    Hansen, Steen Honoré; Holmfred, Else Skovgaard; Cornett, Claus;

    2015-01-01

    An effective, robust, and inexpensive grinding device for the grinding of herb samples like bark and roots was developed by rebuilding a commercially available coffee grinder. The grinder was constructed to be able to provide various particle sizes, to be easy to clean, and to have a minimum of d...

  1. Development of radioisotope tracer technology

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee; Park, Soon Chul; Lim, Dong Soon; Kim, Jae Ho; Lee, Jae Choon; Lee, Doo Sung; Cho, Yong Suk; Shin, Sung Kuan

    2000-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and to build a strong tracer group to support the local industries. In relation to the tracer technology in 1999, experiments to estimate the efficiencies of a sludge digester of a waste water treatment plant and a submerged biological reactor of a dye industry were conducted. As a result, the tracer technology for optimization of facilities related to wastewater treatment has been developed and is believed to contribute to improve their operation efficiency. The quantification of the experimental result was attempted to improve the confidence of tracer technology by ECRIN program which basically uses the MCNP simulation principle. Using thin layer activation technique, wear of tappet shim was estimated. Thin layer surface of a tappet shim was irradiated by proton beam and the correlation between the measured activity loss and the amount of wear was established. The equipment was developed to adjust the energy of proton which collides with the surface of tappet. The tracer project team has participated into the tracer test for estimating the efficiency of RFCC system in SK cooperation. From the experiment the tracer team has obtained the primary elements to be considered for judging the efficiency of RFCC unit. By developing the tracer techniques to test huge industrial units like RFCC, the tracer team will be able to support the local industries that require technical services to solve any urgent trouble. (author)

  2. Technology and Motor Ability Development

    Science.gov (United States)

    Wang, Lin; Lang, Yong; Luo, Zhongmin

    2014-01-01

    As a new member joining the technology family, active video games have been developed to promote physical exercise. This working-in-progress paper shares an ongoing project on examining the basic motor abilities that are enhanced through participating in commercially available active video games. [For the full proceedings see ED557181.

  3. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism

  4. An International Development Technology Center

    Science.gov (United States)

    Morgan, Robert P.

    1969-01-01

    Main focus of the Center is "the application of science and technology to the solution of problems faced by people in less-developed areas of the world. Adapted from paper presented at ASEE Annual Meeting, The Pennsylvania State University, June, 1969. (Author/WM)

  5. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism ref

  6. Forecasting for strengthening technological development

    Directory of Open Access Journals (Sweden)

    Aida Mayerly Fúquene Montañez

    2010-05-01

    Full Text Available Producing technological innovation is currently one of the key items in being more competitive. However, production sectors are facing great challenges, including analysing a large amount of available technological and market information regarding the en- vironment for strategic decision-making and being able to launch themselves onto the market with technological developments bringing the desired economic returns. Several tools for analysing information have emerged for reducing the uncertainty of tech- nological and market changes. This article provides conceptual and reflective elements so that forecasting strengthens technolo- gical development (TD. Forecasting is initially proposed as being one of the future methods of analysis having a significant im- pact on decision-making, mainly within the field of economics but which could be extrapolated to making a contribution to TD. The techniques which have been the recent instrument for collecting information for producing forecasting are described, as is work about the concept of surveillance/monitoring and the processes used for coordinating such approaches. It can thus be sta- ted that they provide an excellent basis for strengthening TD by providing platforms for new or improved developments in pro- cesses or products. Reflection about these aspects provides perspectives for implementing technological forecasting (TF in pro- duction systems so that they obtain efficient and concrete results via deterministic methods as input in decision-making in techno- logy regarding its middle- and long-term competitiveness.

  7. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  8. Study on corrosive grinding of gears

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Careful grinding or honing is usually required in machining of gears in order to improvethe machining quality of gear surface. Thus several grinding additives were used to formulate syn-thetic grinding lubricants similar to superior running-in lubricants. Experimental results show thatthe tooth surface of the produced oblique gear and steel worm becomes extremely smooth aftergrinding at a certain load for about a half to one hour. Especially, the gear surface finished withspecially formulated grinding lubricant reaches mirror-like smoothness. The quality of the geartooth can be improved by corrosive grinding, while the corrosive grinding time can be controlled byadjusting the quantity of the corrosive additives and the speed and load of the gears.

  9. Development of Remote Operations Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Ji Sub; Kwon, Sung Gyu; Kim, Ki Ho; Park, Byung Suk; Park Young Soo; Lee, Won Sang [Korea Atomic Energry Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    To control the swing of the load suspended to overhead crane, various devices, anti-swing control algorithms, and experimental and pilot-scaled cranes have been developed since 1989. In this year, the problems of control algorithm are identified and new algorithms which adopt an acceleration profile planning, a velocity feedback control, a fuzzy control, and an anti-swing/position control methods are developed. Also, the report includes the program of transferring the anti-swing overhead crane technology to industry. And, to improve the cask handling safety and to increase the cask handling capacity of a facility, a Remote Cask Grappling and Lid Unbolting Device (RCG=LUD) which is suspended to an anti-swing crane and remotely controlled to hold the cask and unbolt the cask lid is developed. the controller using PMAC is tested for successful remote operations. Technology for this device has the potential for developing other technologies, such as nuclear reactor maintenance and repair. 62 refs., 73 figs., 27 tabs.

  10. Advanced Modular Inverter Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Adam Szczepanek

    2006-02-04

    Electric and hybrid-electric vehicle systems require an inverter to convert the direct current (DC) output of the energy generation/storage system (engine, fuel cells, or batteries) to the alternating current (AC) that vehicle propulsion motors use. Vehicle support systems, such as lights and air conditioning, also use the inverter AC output. Distributed energy systems require an inverter to provide the high quality AC output that energy system customers demand. Today's inverters are expensive due to the cost of the power electronics components, and system designers must also tailor the inverter for individual applications. Thus, the benefits of mass production are not available, resulting in high initial procurement costs as well as high inverter maintenance and repair costs. Electricore, Inc. (www.electricore.org) a public good 501 (c) (3) not-for-profit advanced technology development consortium assembled a highly qualified team consisting of AeroVironment Inc. (www.aerovironment.com) and Delphi Automotive Systems LLC (Delphi), (www.delphi.com), as equal tiered technical leads, to develop an advanced, modular construction, inverter packaging technology that will offer a 30% cost reduction over conventional designs adding to the development of energy conversion technologies for crosscutting applications in the building, industry, transportation, and utility sectors. The proposed inverter allows for a reduction of weight and size of power electronics in the above-mentioned sectors and is scalable over the range of 15 to 500kW. The main objective of this program was to optimize existing AeroVironment inverter technology to improve power density, reliability and producibility as well as develop new topology to reduce line filter size. The newly developed inverter design will be used in automotive and distribution generation applications. In the first part of this program the high-density power stages were redesigned, optimized and fabricated. One of the main

  11. Experimental Setup for Diamond Grinding Using Electrochemical InProcess Controlled Dressing (ECD) of Grinding Wheel

    OpenAIRE

    M. A. Shavva; E. M. Zaharevich

    2014-01-01

    The most effective method for finish machining of hard-metals and alloys is to use the diamond grinding wheels for grinding. An application of diamond wheels significantly increases the employee output, reduces costs, and raises manufacturing efficiency with achieving the high performance properties of treated surfaces.During grinding a working surface of diamond wheel wears out. It adversely affects the cutting capability of the diamond grains, and depending on the grinding conditions can oc...

  12. Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

    Directory of Open Access Journals (Sweden)

    Zhang Dongkun

    2015-04-01

    Full Text Available Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication (MQL, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm3, respectively. The specific grinding energy significantly decreased to 32.7 J/mm3 in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%, respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%, and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS2, carbon nanotube (CNT, and ZrO2 nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS2 nanoparticle was only 32.7 J/mm3, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS2 nanoparticle, which indicated its remarkable lubrication effects. Furthermore, the role of MoS2 particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS2 volume concentrations of 1%, 2%, and 3% were used. Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS2 nanoparticle volume concentration increased. Satisfactory grinding surface lubrication effects were obtained with 2% MoS2 nanoparticle volume concentration.

  13. Innovative grinding wheel design for cost-effective machining of advanced ceramics. Phase I, final report

    Energy Technology Data Exchange (ETDEWEB)

    Licht, R.H.; Ramanath, S.; Simpson, M.; Lilley, E.

    1996-02-01

    Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics. This program was a cooperative effort involving three Norton groups representing a superabrasive grinding wheel manufacturer, a diamond film manufacturing division and a ceramic research center. The program was divided into two technical tasks, Task 1, Analysis of Required Grinding Wheel Characteristics, and Task 2, Design and Prototype Development. In Task 1 we performed a parallel path approach with Superabrasive metal-bond development and the higher technical risk, CVD diamond wheel development. For the Superabrasive approach, Task 1 included bond wear and strength tests to engineer bond-wear characteristics. This task culminated in a small-wheel screening test plunge grinding sialon disks. In Task 2, an improved Superabrasive metal-bond specification for low-cost machining of ceramics in external cylindrical grinding mode was identified. The experimental wheel successfully ground three types of advanced ceramics without the need for wheel dressing. The spindle power consumed by this wheel during test grinding of NC-520 sialon is as much as to 30% lower compared to a standard resin bonded wheel with 100 diamond concentration. The wheel wear with this improved metal bond was an order of magnitude lower than the resin-bonded wheel, which would significantly reduce ceramic grinding costs through fewer wheel changes for retruing and replacements. Evaluation of ceramic specimens from both Tasks 1 and 2 tests for all three ceramic materials did not show evidence of unusual grinding damage. The novel CVD-diamond-wheel approach was incorporated in this program as part of Task 1. The important factors affecting the grinding performance of diamond wheels made by CVD coating preforms were determined.

  14. Changeing of fly ash leachability after grinding

    Science.gov (United States)

    Lakatos, J.; Szabo, R.; Racz, A.; Banhidi, O.; Mucsi, G.

    2016-04-01

    Effect of grinding on the reactivity of fly ash used for geopolymer production was tested. Extraction technique using different alkaline and acidic solutions were used for detect the change of the solubility of elements due to the physical and mechano-chemical transformation of minerals in function of grinding time. Both the extraction with alkaline and acidic solution have detected improvement in solubility in function of grinding time. The enhancement in alkaline solution was approx. 100% in case of Si and Al. The acidic medium able to dissolve the fly ash higher manner than the alkaline, therefore the effect of grinding was found less pronounced.

  15. Study on the Friction Coefficient in Grinding

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The friction between the abrasive grains and workpi ec e is a crutial factor determining the main grinding output. Few studies have bee n carried out investigating the values of the friction coefficient in grinding, due to the difficulty of direct measurement. In this paper, a mathematical model of the friction coefficient in grinding has been established with the aid of a new grinding parameter C ge, which has close relations to wheel wear rate Z s, metal removal rate Z w, specific energy u and gr...

  16. Technology development and technology gap among Latin American countries

    OpenAIRE

    Serrano Moya, Edgar David

    2014-01-01

    Objective: to study the source of the technology gaps amongst some Latin American countries and to identify whether a regional system of technological progress may be strengthened. ethodology: technology development within some Latin America countries was researched based on the technology frontier concept. In order to do that, the technological advancement of such countries was compared using standard variables and institutional systems. The concept and scope of the technology frontier, whic...

  17. Proteomics: technology development and applications.

    Science.gov (United States)

    Walton, S Patrick; Jayaraman, Arul

    2009-02-01

    Technology development in, and the application of, proteomics are emerging areas among chemical engineers and others who presented at the 2008 American Institute of Chemical Engineers (AIChE) Annual Meeting. Overall, the centennial meeting offered a broad current perspective on the discipline of chemical engineering as it enters its second century. Biomedical and biochemical engineering continue to grow as important facets of the discipline. Within these, the value and applicability of proteomics were demonstrated in a number of interesting presentations. This year, as in the recent past, the AIChE Annual Meeting was held in conjunction with the American Electrophoresis Society Annual Meeting. American Electrophoresis Society presenters offered further academic and industrial viewpoints on the still-developing role of proteomics and proteomic technologies in biological and clinical analyses.

  18. IMPACT GRINDING OF DAMP MATERIALS

    Directory of Open Access Journals (Sweden)

    Ladaev Nikolay Mikhaylovich

    2012-10-01

    Centrifugal grinders were used to analyze the grinding process. The experimental data have proven that the probability of destruction of damp samples is a lot higher than the one of dry samples, given the same initial dimensions of particles and the loading intensity. The rise in the probability of destruction is stipulated by the fact that that the grinder speed at which crushing is triggered is lower in case of damp samples than in case of dry ones. Expressions for speed that describes destruction initiation and the probability of destruction depending on the type of materials, the moisture content and the loading intensity have been derived.

  19. Both Analysis and Discussion of Processing Situations for Glass with the Special Shape Grinding%异型玻璃磨边加工现状的分析与探讨

    Institute of Scientific and Technical Information of China (English)

    杨兰玉; 李英

    2016-01-01

    通过分析国内外异型玻璃磨边加工和磨边机的发展现状,提出使用机器人技术来解决异型玻璃磨边问题,探讨了异形玻璃磨边机器人的关键技术,并给出两种解决方案,对提高我国异型玻璃加工的自动化程度具有一定的指导意义.%Development status of Grinding Edge and Grind machine for glass with the special shape at home and abroad was analyzed, Grinding edge problems for glass with the special shape were solved by using robotic technology, the key technologies of grind machine for glass with the special shape were discussed, and two solutions were given. It has a certain guiding significance to enhance the automation of glass with the special shape grinding in China.

  20. Ultrasonic Vibration Assisted Grinding of Bio-ceramic Materials: Modeling, Simulation, and Experimental Investigations on Edge Chipping

    Science.gov (United States)

    Tesfay, Hayelom D.

    Bio-ceramics are those engineered materials that find their applications in the field of biomedical engineering or medicine. They have been widely used in dental restorations, repairing bones, joint replacements, pacemakers, kidney dialysis machines, and respirators. etc. due to their physico-chemical properties, such as excellent corrosion resistance, good biocompatibility, high strength and high wear resistance. Because of their inherent brittleness and hardness nature they are difficult to machine to exact sizes and dimensions. Abrasive machining processes such as grinding is one of the most widely used manufacturing processes for bioceramics. However, the principal technical challenge resulted from these machining is edge chipping. Edge chipping is a common edge failure commonly observed during the machining of bio-ceramic materials. The presence of edge chipping on bio-ceramic products affects dimensional accuracy, increases manufacturing cost, hider their industrial applications and causes potential failure during service. To overcome these technological challenges, a new ultrasonic vibration-assisted grinding (UVAG) manufacturing method has been developed and employed in this research. The ultimate aim of this study is to develop a new cost-effective manufacturing process relevant to eliminate edge chippings in grinding of bio-ceramic materials. In this dissertation, comprehensive investigations will be carried out using experimental, theoretical, and numerical approaches to evaluate the effect of ultrasonic vibrations on edge chipping of bioceramics. Moreover, effects of nine input variables (static load, vibration frequency, grinding depth, spindle speed, grinding distance, tool speed, grain size, grain number, and vibration amplitude) on edge chipping will be studied based on the developed models. Following a description of previous research and existing approaches, a series of experimental tests on three bio-ceramic materials (Lava, partially fired Lava

  1. Mechanical Property of Low Chromium Semi-Steel Grinding Ball Prepared by Cross Rolling

    Institute of Scientific and Technical Information of China (English)

    CHANG Li-min; MENG De-liang; NIE Pu-lin; LIU Jian-hua

    2004-01-01

    The preparing method, rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied. The results show that when the low chromium semi-steel bar is forged from 55 mm to 50 mm, cross-rolled into grinding ball at 1 000-1 050 ℃, air cooled and tempered at 550 ℃ for 2 h, the best mechanical properties, especially the abrasive resistance under the action of hard abrasive, can be obtained.

  2. Modelling and simulation of fixtures during grinding

    Institute of Scientific and Technical Information of China (English)

    Matthias; KLAERNER; Juergen; LEOPOLD; Lothar; KROLL

    2009-01-01

    The complex workpiece-fixture behaviour during machining is an essential component of the fixture development process.In detail,the forces acting on fixture components have to be analysed.A method for the prediction of the reaction forces due to process and clamping loads is presented in this article.At the beginning,detailed information about the workpiece-fixture behaviour during the process is determined by a complex finite element model.Secondly,the reduction of the number of elements leads to a smaller model with less computation time,validated and used for the variation of process parameters.Finally,an analytical description is developed based on the combination of both results.With the help of the empiric equation it is possible to predict the reaction forces and the dependency on several process parameters.This method has been validated by modelling shape grinding of a nozzle guide vane.

  3. Modelling and simulation of fixtures during grinding

    Institute of Scientific and Technical Information of China (English)

    Matthias KLAERNER; Juergen LEOPOLD; Lothar KROLL

    2009-01-01

    The complex workpiece-fixture behaviour during machining is an essential component of the fixture development process. In detail, the forces acting on fixture components have to be analysed. A method for the prediction of the reaction forces due to process and clamping loads is presented in this article.At the beginning, detailed information about the workpiece-fixture behaviour during the process is determined by a complex finite element model. Secondly, the reduction of the number of elements leads to a smaller model with less computation time, validated and used for the variation of process parameters. Finally, an analytical description is developed based on the combination of both results.With the help of the empiric equation it is possible to predict the reaction forces and the dependency on several process parameters. This method has been validated by modelling shape grinding of a nozzle guide vane.

  4. Grinding analysis of Indian coal using response surface methodology

    Institute of Scientific and Technical Information of China (English)

    Twinkle Singh; Aishwarya Awasthi; Pranjal Tripathi; Shina Gautam; Alok Gautam

    2016-01-01

    The present work discusses a systematic approach to model grinding parameters of coal in a ball mill.A three level Box-Behnken design combined with response surface methodology using second order model was applied to the experiments done according to the model requirement.Three parameters ball charge (numbers 10-20),coal content (100-200 g) and the grinding time (4-8 min) were chosen for the experiments as well as for the modeling work.Coal fineness is defined as the d80 (80 % passing size).A quadratic model was developed to show the effect of parameters and their interaction with fineness of the product.Three different sizes (4,1 and 0.65 mm) of Indian coal were used.The model equations for each fraction were developed and different sets of experiments were performed.The predicted values of the fineness of coal were in good agreement with the experimental results (R2 values of d80 varies between 0.97 and 0.99).Fine size of three different coal sizes were obtained with larger ball charge with less grinding time and less solid content.This work represents the efficient use of response surface methodology and the Box-Behnken design use for grinding of Indian coal.

  5. Manufacturing processes 2 grinding, honing, lapping

    CERN Document Server

    Klocke, Fritz

    2009-01-01

    Presents a view of the most common machining and non-machining manufacturing processes. This volume describes the characteristics of abrasive tools, their design and manufacturing, followed by the fundamentals of grinding fluids. It also discusses grinding of different materials (steel, cast iron, hard and brittle materials, nickel and titanium).

  6. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Ko, W. I.; Song, D. Y. [and others

    2000-03-01

    During the first phase of R and D program conducted from 1997 to 1999, nuclear material safeguards studies system were performed on the technology development of DUPIC safeguards system such as nuclear material measurement in bulk form and product form, DUPIC fuel reactivity measurement, near-real-time accountancy, and containment and surveillance system for effective and efficient implementation of domestic and international safeguards obligation. For the nuclear material measurement system, the performance test was finished and received IAEA approval, and now is being used in DUPIC Fuel Fabrication Facility(DFDF) for nuclear material accounting and control. Other systems being developed in this study were already installed in DFDF and being under performance test. Those systems developed in this study will make a contribution not only to the effective implementation of DUPIC safeguards, but also to enhance the international confidence build-up in peaceful use of spent fuel material. (author)

  7. Optimization of the dressing parameters in cylindrical grinding based on a generalized utility function

    Science.gov (United States)

    Aleksandrova, Irina

    2016-01-01

    The existing studies, concerning the dressing process, focus on the major influence of the dressing conditions on the grinding response variables. However, the choice of the dressing conditions is often made, based on the experience of the qualified staff or using data from reference books. The optimal dressing parameters, which are only valid for the particular methods and dressing and grinding conditions, are also used. The paper presents a methodology for optimization of the dressing parameters in cylindrical grinding. The generalized utility function has been chosen as an optimization parameter. It is a complex indicator determining the economic, dynamic and manufacturing characteristics of the grinding process. The developed methodology is implemented for the dressing of aluminium oxide grinding wheels by using experimental diamond roller dressers with different grit sizes made of medium- and high-strength synthetic diamonds type ??32 and ??80. To solve the optimization problem, a model of the generalized utility function is created which reflects the complex impact of dressing parameters. The model is built based on the results from the conducted complex study and modeling of the grinding wheel lifetime, cutting ability, production rate and cutting forces during grinding. They are closely related to the dressing conditions (dressing speed ratio, radial in-feed of the diamond roller dresser and dress-out time), the diamond roller dresser grit size/grinding wheel grit size ratio, the type of synthetic diamonds and the direction of dressing. Some dressing parameters are determined for which the generalized utility function has a maximum and which guarantee an optimum combination of the following: the lifetime and cutting ability of the abrasive wheels, the tangential cutting force magnitude and the production rate of the grinding process. The results obtained prove the possibility of control and optimization of grinding by selecting particular dressing

  8. Lunar Dust Mitigation Technology Development

    Science.gov (United States)

    Hyatt, Mark J.; Deluane, Paul B.

    2008-01-01

    NASA s plans for implementing the Vision for Space Exploration include returning to the moon as a stepping stone for further exploration of Mars, and beyond. Dust on the lunar surface has a ubiquitous presence which must be explicitly addressed during upcoming human lunar exploration missions. While the operational challenges attributable to dust during the Apollo missions did not prove critical, the comparatively long duration of impending missions presents a different challenge. Near term plans to revisit the moon places a primary emphasis on characterization and mitigation of lunar dust. Comprised of regolith particles ranging in size from tens of nanometers to microns, lunar dust is a manifestation of the complex interaction of the lunar soil with multiple mechanical, electrical, and gravitational effects. The environmental and anthropogenic factors effecting the perturbation, transport, and deposition of lunar dust must be studied in order to mitigate it s potentially harmful effects on exploration systems. This paper presents the current perspective and implementation of dust knowledge management and integration, and mitigation technology development activities within NASA s Exploration Technology Development Program. This work is presented within the context of the Constellation Program s Integrated Lunar Dust Management Strategy. The Lunar Dust Mitigation Technology Development project has been implemented within the ETDP. Project scope and plans will be presented, along with a a perspective on lessons learned from Apollo and forensics engineering studies of Apollo hardware. This paper further outlines the scientific basis for lunar dust behavior, it s characteristics and potential effects, and surveys several potential strategies for its control and mitigation both for lunar surface operations and within the working volumes of a lunar outpost.

  9. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  10. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  11. Information technology for sustainable development

    DEFF Research Database (Denmark)

    Holgaard, Jette Egelund; Guerra, Aida; Knoche, Hendrik

    2013-01-01

    from a broader theme to a problem formulation designed to fit the time, discipline and theme of study. In the prospect of Education for Sustainable development (ESD) the students are to move from the conceptually complex field of sustainable development (SD) to a specific formulation of a problem...... that initiate design, implementation and test of ICT for SD. On the empirical level we draw from experiments in autumn 2009 and spring 2013 within the field of Media technology. Observations, text analysis of students’ work as well as reflections from staff has been relied on in order to analyse the practical...... frame, like sustainability, encouraged students to broaden their perspective on stressing economic, environmental as well as social concerns. However, the experiments also showed that interlinking engineering subjects with sustainability is a rather time-consuming task – and some of the students were...

  12. Optimization of Metal Removal Rateon Cylindrical Grinding For Is 319 Brass Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Gaurav Upadhyay

    2015-06-01

    Full Text Available Cylindrical grinding is one of the most important metal cutting processes used extensively in the Metal finishing operations. Metal removal rate and surface finish are the important output responses in the production with respect to quantity and quality respectively. The objective of this paper is to arrive at the optimal grinding conditions that will maximize metal removal rate when grinding IS 319 brass. Empirical models were developed using design of experiments by Taguchi L9 Orthogonal Array and the adequacy of the developed model is tested with ANOVA.

  13. Crystalline silica dust and respirable particulate matter during indoor concrete grinding - wet grinding and ventilated grinding compared with uncontrolled conventional grinding.

    Science.gov (United States)

    Akbar-Khanzadeh, Farhang; Milz, Sheryl; Ames, April; Susi, Pamela P; Bisesi, Michael; Khuder, Sadik A; Akbar-Khanzadeh, Mahboubeh

    2007-10-01

    The effectiveness of wet grinding (wet dust reduction method) and ventilated grinding (local exhaust ventilation method, LEV) in reducing the levels of respirable crystalline silica dust (quartz) and respirable suspended particulate matter (RSP) were compared with that of uncontrolled (no dust reduction method) conventional grinding. A field laboratory was set up to simulate concrete surface grinding using hand-held angle grinders in an enclosed workplace. A total of 34 personal samples (16 pairs side-by-side and 2 singles) and 5 background air samples were collected during 18 concrete grinding sessions ranging from 15-93 min. General ventilation had no statistically significant effect on operator's exposure to dust. Overall, the arithmetic mean concentrations of respirable crystalline silica dust and RSP in personal air samples during: (i) five sessions of uncontrolled conventional grinding were respectively 61.7 and 611 mg/m(3) (ii) seven sessions of wet grinding were 0.896 and 11.9 mg/m(3) and (iii) six sessions of LEV grinding were 0.155 and 1.99 mg/m(3). Uncontrolled conventional grinding generated relatively high levels of respirable silica dust and proportionally high levels of RSP. Wet grinding was effective in reducing the geometric mean concentrations of respirable silica dust 98.2% and RSP 97.6%. LEV grinding was even more effective and reduced the geometric mean concentrations of respirable silica dust 99.7% and RSP 99.6%. Nevertheless, the average level of respirable silica dust (i) during wet grinding was 0.959 mg/m(3) (38 times the American Conference of Governmental Industrial Hygienists [ACGIH] threshold limit value [TLV] of 0.025 mg/m(3)) and (ii) during LEV grinding was 0.155 mg/m(3) (6 times the ACGIH TLV). Further studies are needed to examine the effectiveness of a greater variety of models, types, and sizes of grinders on different types of cement in different positions and also to test the simulated field lab experimentation in the field.

  14. Surface quality prediction model of nano-composite ceramics in ultrasonic vibration-assisted ELID mirror grinding

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Bo; Chen, Fan; Jia, Xiao-feng; Zhao, Chong-yang; Wang, Xiao-bo [Henan Polytechnic University, Jiaozuo (China)

    2017-04-15

    Ultrasonic vibration-assisted Electrolytic in-process dressing (ELID) grinding is a highly efficient and highly precise machining method. The surface quality prediction model in ultrasonic vibration-assisted ELID mirror grinding was studied. First, the interaction between grits and workpiece surface was analyzed according to kinematic mechanics, and the surface roughness model was developed. The variations in surface roughness under different parameters was subsequently calculated and analyzed by MATLAB. Results indicate that compared with the ordinary ELID grinding, ultrasonic vibration-assisted ELID grinding is superior, because it has more stable and better surface quality and has an improved range of ductile machining.

  15. Two Phase Technology Development Initiatives

    Science.gov (United States)

    Didion, Jeffrey R.

    1999-01-01

    Three promising thermal technology development initiatives, vapor compression thermal control system, electronics cooling, and electrohydrodynamics applications are outlined herein. These technologies will provide thermal engineers with additional tools to meet the thermal challenges presented by increased power densities and reduced architectural options that will be available in future spacecraft. Goddard Space Flight Center and the University of Maryland are fabricating and testing a 'proto- flight' vapor compression based thermal control system for the Ultra Long Duration Balloon (ULDB) Program. The vapor compression system will be capable of transporting approximately 400 W of heat while providing a temperature lift of 60C. The system is constructed of 'commercial off-the-shelf' hardware that is modified to meet the unique environmental requirements of the ULDB. A demonstration flight is planned for 1999 or early 2000. Goddard Space Flight Center has embarked upon a multi-discipline effort to address a number of design issues regarding spacecraft electronics. The program addressed the high priority design issues concerning the total mass of standard spacecraft electronics enclosures and the impact of design changes on thermal performance. This presentation reviews the pertinent results of the Lightweight Electronics Enclosure Program. Electronics cooling is a growing challenge to thermal engineers due to increasing power densities and spacecraft architecture. The space-flight qualification program and preliminary results of thermal performance tests of copper-water heat pipes are presented. Electrohydrodynamics (EHD) is an emerging technology that uses the secondary forces that result from the application of an electric field to a flowing fluid to enhance heat transfer and manage fluid flow. A brief review of current EHD capabilities regarding heat transfer enhancement of commercial heat exchangers and capillary pumped loops is presented. Goddard Space Flight

  16. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Kang, H. Y.; Ko, W. I. [and others

    2002-05-01

    DUPIC safeguards R and D in the second phase has focused on the development of nuclear material measurement system and its operation and verification, the development of nuclear material control and accounting system, and the development of remote and unmanned containment/surveillance system. Of them, the nuclear material measurement system was authenticated from IAEA and officially used for IAEA and domestic safeguards activities in DFDF. It was also verified that the system could be used for quality control of DUPIC process. It is recognised that the diagnostic software using neural network and remote and unmanned containment/surveillance system developed here could be key technologies to go into remote and near-real time monitoring system. The result of this project will eventually contribute to similar nuclear fuel cycles like MOX and pyroprocessing facility as well as the effective implementation of DUPIC safeguards. In addition, it will be helpful to enhance international confidence build-up in the peaceful use of spent fuel material.

  17. Rocas para moler: análisis de procedencia de materias primas líticas para artefactos de molienda (área Interserrana Bonaerense Rocks For Grinding: Lithic Raw Material Provenience Studies Of Grinding Technology, Interserrana Area Of Buenos Aires Province, Argentina

    Directory of Open Access Journals (Sweden)

    Alejandra B. Matarrese

    2009-06-01

    Full Text Available Los artefactos de molienda representan frecuentemente grandes volúmenes de roca trasportados a los sitios arqueológicos del área Interserrana Bonaerense. En el contexto de los recientes estudios sistemáticos en relación a estos artefactos, en este trabajo se presentan los resultados de los análisis macroscópicos, de cortes delgados y de difracción de rayos X de una muestra de instrumentos confeccionados sobre materias primas sedimentarias y metamórficas. De manera complementaria, se consideran características de las formas-base y los pesos de parte de los artefactos estudiados. Los datos obtenidos se discuten respecto a la procedencia y estrategias de explotación de estos recursos líticos utilizados para los artefactos de molienda. Se identificó en los conjuntos estudiados el uso de rocas disponibles en afloramientos de los sistemas serranos pampeanos de Tandilia y Ventania e interserranos. El trasladado de estas materias primas líticas a los contextos bajo estudio implicaron diferentes esfuerzos de aprovisionamiento (locales, de media y de larga distancia. Las características petrográficas de las rocas seleccionadas para la producción de los artefactos de molienda se relacionan principalmente con una alta capacidad abrasiva. En algunos casos, se habrían aprovechado formas-base naturales aptas para ser usadas sin modificaciones previas. Estos datos comprenden un primer acercamiento a la gestión de recursos líticos para la manufactura y/o uso de artefactos de molienda por parte de grupos cazadores-recolectores prehispánicos pampeanos durante el Holoceno tardío.Grinding tools frequently comprise great volumes of rocks transported to the archaeological sites of the Interserrana area of Buenos Aires Province. The results from thin section and X-ray diffraction analyses of a sample of grinding artifacts manufactured from sedimentary and metamorphic raw material are presented in this paper in the context of recent systematic

  18. Development and Applications of Simulation Technology

    Institute of Scientific and Technical Information of China (English)

    WangZicai

    2004-01-01

    The developing process of simulation technology is discussed in view of its development, maturation and further development.The applications of simulation technology in the fields of national economy are introduced. Finally, the level and status quo of simulation technology home and overseas are analyzed, and its future trend in the new century is presented.

  19. Controlled wear of vitrified abrasive materials for precision grinding applications

    Indian Academy of Sciences (India)

    M J Jackson; B Mills; M P Hitchiner

    2003-10-01

    The study of bonding hard materials such as aluminium oxide and cubic boron nitride (BN) and the nature of interfacial cohesion between these materials and glass is very important from the perspective of high precision grinding. Vitrified grinding wheels are typically used to remove large volumes of metal and to produce components with very high tolerances. It is expected that the same grinding wheel is used for both rough and finish machining operations. Therefore, the grinding wheel, and in particular its bonding system, is expected to react differently to a variety of machining operations. In order to maintain the integrity of the grinding wheel, the bonding system that is used to hold abrasive grains in place reacts differently to forces that are placed on individual bonding bridges. This paper examines the role of vitrification heat treatment on the development of strength between abrasive grains and bonding bridges, and the nature of fracture and wear in vitrified grinding wheels that are used for precision grinding applications.

  20. Research Progress of Interfacial Chemism of High Efficiency Organic Grinding Fluid for Si3N4 Ceramics

    Institute of Scientific and Technical Information of China (English)

    TIAN Xin-li; YANG Jun-fei; WU Zhi-yuan; HU Zhong-xiang

    2005-01-01

    Grinding is a most important machining method for Si3N4 ceramics. Utilizing interracial chemistry reac tion membrane between grinding fluid and Si3N4 ceramics can reduce friction factor, soften surface layer and meanwhile improve the grinding efficiency, which is a bran-new research direction. This article, based on high efficiency grinding of Si3N4 ceramics by the way of half plasticity removal, descanted on the assistant function of interface chemistry reaction to improve the removal rate of Si3N4 ceramics in the application of organic grinding fluids represented by alcohols grinding fluid. To target action mechanism research, it applies the methods of classification,comparison and induction, and advanced test equipments to explore the effects of long, short carbochain alcohol and their water solutions acting as grinding fluids. In addition, it also discusses the effective function of three groups of organic matters such as perhalogeno hydrocarbon, cationic surfactant and tetra ethoxysilane acting as grinding fluid components from different angles, reveals their mechanisms of action, and supplies theoretical basis for the development of machining ceramic grinding fluid of high efficiency, low cost.

  1. Is China Developing an Independent Technology Capability?

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Are Chinese technology enterprises only the "hired laborers" of other countries? Does China possess high technology in a real sense? When will the country develop independent scientific and technological innovation? Those are not brand new questions. However, after the Chinese Government issued its National Guidelines on the Long- and Medium-Term Program for Science and Technology

  2. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  3. The Inlet Engine Valves Grinding Using Different Types of Cutting Fluids and Grinding Wheels

    Directory of Open Access Journals (Sweden)

    Eraldo Jannone da Silva

    2002-06-01

    Full Text Available In this paper an experimental research is presented in which different types of cutting fluids (a cutting oil and three different types of soluble oils and grinding wheels (alumina and vitrified CBN were tested in the inlet engine valves grinding. As evaluation parameters the workpiece residual stress and the grinding wheel wear were analyzed. The cutting fluid and the grinding wheel types adopted resulted in changes in all the parameters, due to the different lubricant abilities among the fluids and due to the differences in the mechanical and thermal properties among the abrasives tested. For grinding this steel, the CBN wheel is the best choice, mainly due to compressive residual stress results obtained for all cutting fluids tested. The cutting oil is the most adequate cutting fluid to be used, due to its higher lubricity and ability in keeping the wheel sharp for longer periods of time, reducing the overall grinding energy and the thermal damage.

  4. The effects of pf grind quality on coal burnout in a 1 MW combustion test facility

    Energy Technology Data Exchange (ETDEWEB)

    Richelieu Barranco; Michael Colechin; Michael Cloke; Will Gibb; Edward Lester [University of Nottingham, Nottingham (United Kingdom). School of Chemical, Environmental and Mining Engineering, Nottingham Fuel and Energy Centre

    2006-05-15

    A study was carried out to determine the effect of pf particle size distribution on coal burnout propensity in a 1 MW pulverised fuel burner. The specific aim of the work was to assess the improvement in combustion performance achievable by retrofitting commercially available high performance static or dynamic classifiers to existing plants. Two coals were used and were selected as representative of extremes in fuel characteristics experienced by coal importing utilities in Europe. Each coal was fired in the unit at a range of grind sizes to determine the overall impact of a variable performance from a mill. The levels of unburnt carbon in the resultant flyashes for the two coals showed significantly different behaviour. For the higher volatile coal, the unburnt carbon was found to be insensitive to grind quality. However, the coarser grinds of the other coal produced significantly lower unburnt carbon than expected when compared with the finest grinds. Generally the results indicate that the installation of improved classification technology, leading to a finer product, will help to lower unburnt carbon levels. Nevertheless, further work will be necessary to establish the levels of diminishing returns for grind size, burnout performance and grind costs. 21 refs., 4 figs., 4 tabs.

  5. Multiparameter Optimization and Controlling for Cylindrical Grinding Process

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper bursts the bondage of conventional no-burn thought, presents an optimum strategy permitting burn appear in grinding roughing stage, but the burning layer can be summed on the following finishing stage. On the base of the basic grinding models, the objective function and constrained functions for the multiparameter optimum grinding models had been built in this paper. By the computer simulation, the nonlinear optimum grinding control parameters had been obtained, and the truth grinding process had...

  6. Effect of cryogenic grinding on volatile and fatty oil constituents of cumin (Cuminum cyminum L.) genotypes.

    Science.gov (United States)

    Sharma, L K; Agarwal, D; Rathore, S S; Malhotra, S K; Saxena, S N

    2016-06-01

    Effect of cryogenic grinding on recovery of volatile oil, fatty oil percentage and their constituents in two cumin (Cuminum cyminum L.) genotypes have been analyzed. Cryogenic grinding not only retains the volatiles but enhanced the recovery by 33.9 % in GC 4 and 43.5 % in RZ 209. A significant increase (29.9 %) over normal grinding in oil percentage was also observed in genotype RZ 209. This increase was, however, less (15.4 %) in genotype GC 4. Nineteen major compounds were identified in the essential oil of both genotypes. The two grinding techniques had significant effects on dependent variables, viz., volatile oil and monoterpenes. Cuminaldehyde was the main constituent in both genotypes, content of which increased from 48.2 to 56.1 % in GC 4 on cryo grinding. Content of terpines were found to decrease in cryo ground samples of GC 4 and either decrease or no change was found in RZ 209. Organoleptic test showed more pleasant aroma in cryo ground seeds of both the genotypes. Significant increase was also reported in fatty oil yield due to cryogenic grinding. Fatty acid methyl ester (FAME) analysis showed oleic acid as major FAME content of which increased from 88.1 to 94.9 % in RZ 209 and from 88.2 to 90.1 % in GC 4 on cryogenic grinding. Other prominent FAME were palmitic, palmitoleic and stearic acid. Results indicated commercial potential of cryogenic grinding technology for cumin in general and spices in particular for better retention of flavour and quality in spices.

  7. Managing Innovation and Technology in Developing Countries

    CERN Document Server

    Ali, Murad; Khan, Pervez

    2009-01-01

    Innovation and technology management is an inevitable issue in the high end technological and innovative organizations. Today, most of the innovations are limited with developed countries like USA, Japan and Europe while developing countries are still behind in the field of innovation and management of technology. But it is also becoming a subject for rapid progress and development in developing countries. Innovation and technology environment in developing countries are by nature, problematic, characterized by poor business models, political instability and governance conditions, low education level and lack of world-class research universities, an underdeveloped and mediocre physical infrastructure, and lack of solid technology based on trained human resources. This paper provides a theoretical and conceptual framework analysis for managing innovation and technology in developing countries like India and China. We present the issues and challenges in innovation and technology management and come up with pro...

  8. Policy issues inherent in advanced technology development

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, P.D.

    1994-12-31

    In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses.

  9. DEVELOPMENT OF TECHNOLOGY FOR ANODE BALL PRODUCTION

    Directory of Open Access Journals (Sweden)

    G. V. Kozhevnikova

    2015-01-01

    Full Text Available Technology of copper anode balls manufacturing by means of cross-wedge rolling method is developed. The technology satisfies the requirements towards anode balls’ crystalline structure, form and geometrical dimensions accuracy.

  10. Energy Storage (II): Developing Advanced Technologies

    Science.gov (United States)

    Robinson, Arthur L

    1974-01-01

    Energy storage, considered by some scientists to be the best technological and economic advancement after advanced nuclear power, still rates only modest funding for research concerning the development of advanced technologies. (PEB)

  11. Colombian capital goods industry and technological development.

    OpenAIRE

    Zuleta LA; Londono JL; Uribe JD

    1982-01-01

    ILO pub-WEP pub. Working paper, capital goods, technology, industrial development, trends, 1955-1978, Colombia - supply and demand, choice of product, Innovation, technology transfer, obstacles, tariff policy, research policy. Bibliography, diagram, statistical tables.

  12. FY-95 technology catalog. Technology development for buried waste remediation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The US Department of Energy`s (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described.

  13. Success factors in technology development

    Science.gov (United States)

    Preston, John T.

    1995-01-01

    Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

  14. Study on the Applicafion of the Mini-grinding Technology in Production of Low-degree Ginger Liquor%超微粉碎技术在低度姜酒生产中的应用

    Institute of Scientific and Technical Information of China (English)

    孙静; 秦德宾

    2011-01-01

    [Objectiv] The reference for the preparation of low-degree ginger liquor was provided through the research on the effect of the mini-grinding of ginger on the quality of its low-degree liquor. [ Methods ] The clarification, stability and sensory of the different low-degree ginger liquors, which were added with common or mini-grinded ginger, were evaluated and compared. [ Results ] The result showed that the clarification of low-ginger liquor added with mini-grinded ginger was obviously higher, with good stability, rich flavor of ginger, and coordinated and sweet alcohol taste, which was typical style of ginger wine ,and all of indicators of the liquor was better than these of the low-degree ginger liquor added with common grinded ginger. [ Conclusion] The quality of the low-degree liquor added with mini-grinded ginger was improved compared with the common ginger liquor.%[目的]研究超微粉碎生姜对所产低度姜酒质量的影响,为低度姜酒生产提供参考.[方法]将生姜普通粉碎和超微粉碎后生产成低度姜酒,对不同低度姜酒的澄清度、稳定性、感官评价结果进行比较.[结果]生姜经超微粉碎后生产的低度姜酒澄清度显著增加,稳定性好,具浓郁的姜香味,酒味协调,醇和甜润,余味爽净,具姜酒典型风格,各项指标远优于普通粉碎生姜生产的姜酒.[结论]经超微粉碎后的生姜生产的低度姜酒质量比经普通粉碎生姜生产的姜酒质量有所提高.

  15. 润磨强化硫酸渣制备氧化球团的技术及机理%Enhancing technology and mechanism of oxidized pellet prepared from pyrite cinder by moisture grinding

    Institute of Scientific and Technical Information of China (English)

    白国华; 周晓青; 范晓慧; 李建臣

    2011-01-01

    In connection with characteristic of pyrite cinder, the characteristic of oxidized pellet prepared from pyrite cinder and the mechanism of moisture grinding on pellet preparation were studied. The results show that the strength of green balls is very low, and the moisture of green balls is fairly higher without moisture grinding. Moisture grinding is an effective means to improve the strength and reduce the moisture of green ball with the less dosage of bentonite by improving size distribution, specific surface area and lowering the porosity of green balls. Moisture grinding can improve the roasting performance of pyrite cinder pellet by improving the surface energy of pyrite cinder and increasing contact points between particles, which has the advantages of diffusion. The compressive strength of pellets overruns 3 kN per pellet with moisture grinding after roasted at 1 150℃ for 10 min. The roasting temperature can be greatly reduced. The high quality oxidized pellet can be produced as a blast furnace feed by using pyrite cinder.%从硫酸渣本身特点出发,对硫酸渣制备氧化球团的特点及润磨在球团制备过程中的作用机理进行研究。研究结果表明:无润磨的硫酸渣生球强度极差,水分较高,润磨可改善硫酸渣的粒度组成、比表面积,降低生球的孔隙率,从而有效降低膨润土用量,大幅提高生球的强度及降低生球的水分;润磨也能提高硫酸渣颗粒活性,增加颗粒与颗粒之间的接触点,使质点利于扩散,从而改善硫酸渣球团的焙烧性能,润磨后的球团在焙烧温度为1150℃、焙烧时间为10 min的条件下,便可获得抗压强度大于3 kN/个的球团,大大降低了球团的焙烧温度。使用硫酸渣能生产出优质的球团供高炉使用。

  16. Mobile Sensor Technologies Being Developed

    Science.gov (United States)

    Greer, Lawrence C.; Oberle, Lawrence G.

    2003-01-01

    The NASA Glenn Research Center is developing small mobile platforms for sensor placement, as well as methods for communicating between roving platforms and a central command location. The first part of this project is to use commercially available equipment to miniaturize an existing sensor platform. We developed a five-circuit-board suite, with an average board size of 1.5 by 3 cm. Shown in the preceding photograph, this suite provides all motor control, direction finding, and communications capabilities for a 27- by 21- by 40-mm prototype mobile platform. The second part of the project is to provide communications between mobile platforms, and also between multiple platforms and a central command location. This is accomplished with a low-power network labeled "SPAN," Sensor Platform Area Network, a local area network made up of proximity elements. In practice, these proximity elements are composed of fixed- and mobile-sensor-laden science packages that communicate to each other via radiofrequency links. Data in the network will be shared by a central command location that will pass information into and out of the network through its access to a backbone element. The result will be a protocol portable to general purpose microcontrollers satisfying a host of sensor networking tasks. This network will enter the gap somewhere between television remotes and Bluetooth but, unlike 802.15.4, will not specify a physical layer, thus allowing for many data rates over optical, acoustical, radiofrequency, hardwire, or other media. Since the protocol will exist as portable C-code, developers may be able to embed it in a host of microcontrollers from commercial to space grade and, of course, to design it into ASICs. Unlike in 802.15.4, the nodes will relate to each other as peers. A demonstration of this protocol using the two test bed platforms was recently held. Two NASA modified, commercially available, mobile platforms communicated and shared data with each other and a

  17. Next generation grinding spindle for cost-effective manufacture of advanced ceramic components

    Energy Technology Data Exchange (ETDEWEB)

    Kovach, J.A.; Laurich, M.A.

    2000-01-01

    Finish grinding of advanced structural ceramics has generally been considered an extremely slow and costly process. Recently, however, results from the High-Speed, Low-Damage (HSLD) program have clearly demonstrated that numerous finish-process performance benefits can be realized by grinding silicon nitride at high wheel speeds. A new, single-step, roughing-process capable of producing high-quality silicon nitride parts at high material removal rates while dramatically reducing finishing costs has been developed.

  18. Recent Developments in Detector Technology

    CERN Document Server

    Brau, James E

    2010-01-01

    This review provides an overview of many recent advances in detector technologies for particle physics experiments. Challenges for new technologies include increasing spatial and temporal sensitivity, speed, and radiation hardness while minimizing power and cost. Applications are directed at several future collider experiments, including the Large Hadron Collider luminosity upgrade (sLHC), the linear collider, and the super high luminosity B factory, as well as neutrino and other fixed target experiments, and direct dark matter searches. Furthermore, particle physics has moved into space, with significant contributions of detector technology, and new challenges for future efforts.

  19. Comparison of Grinding Characteristics of Converter Steel Slag with and without Pretreatment and Grinding Aids

    Directory of Open Access Journals (Sweden)

    Jihui Zhao

    2016-10-01

    Full Text Available The converter steel slag cannot be widely used in building materials for its poor grindability. In this paper, the grinding characteristics of untreated and pretreated (i.e., magnetic separation steel slag were compared. Additionally, the grinding property of pretreated steel slag was also studied after adding grinding aids. The results show that the residues (i.e., oversize substance that passed a 0.9 mm square-hole screen can be considered as the hardly grinding phases (HGP and its proportion is about 1.5%. After the initial 20 min grinding, the RO phase (RO phase is a continuous solid solution which is composed of some divalent metal oxides, such as FeO, MgO, MnO, CaO, etc., calcium ferrite, and metallic iron phase made up most of the proportion of the HGP, while the metallic iron made up the most component after 70 min grinding. The D50 of untreated steel slag could only reach 32.89 μm after 50 min grinding, but that of pretreated steel slag could reach 18.16 μm after the same grinding time. The grinding efficiency of steel slag was obviously increased and the particle characteristics were improved after using grinding aids (GA, especially the particle proportions of 3–32 μm were obviously increased by 7.24%, 7.22%, and 10.63% after 40 min, 50 min, and 60 min grinding, respectively. This is mainly because of the reduction of agglomeration and this effect of GA was evidenced by SEM (scanning electron microscope images.

  20. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  1. Development of Pollution Prevention Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Polle, Juergen [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States); Sanchez-Delgado, Roberto [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States)

    2013-12-30

    This project investigated technologies that may reduce environmental pollution. This was a basic research/educational project addressing two major areas: A. In the algae research project, newly isolated strains of microalgae were investigated for feedstock production to address the production of renewable fuels. An existing collection of microalgae was screened for lipid composition to determine strains with superior composition of biofuel molecules. As many microalgae store triacylglycerides in so-called oil bodies, selected candidate strains identified from the first screen that accumulate oil bodies were selected for further biochemical analysis, because almost nothing was known about the biochemistry of these oil bodies. Understanding sequestration of triacylglycerides in intracellular storage compartments is essential to developing better strains for achieving high oil productivities by microalgae. At the onset of the project there was almost no information available on how to obtain detailed profiles of lipids from strains of microalgae. Our research developed analytical methods to determine the lipid profiles of novel microalgal strains. The project was embedded into other ongoing microalgal projects in the Polle laboratory. The project benefited the public, because students were trained in cell cultivation and in the operation of state-of-the-art analytical equipment. In addition, students at Brooklyn College were introduced into the concept of a systems biology approach to study algal biofuels production. B. A series of new nanostructured catalysts were synthesized, and characterized by a variety of physical and chemical methods. Our catalyst design leads to active nanostructures comprising small metal particles in intimate contact with strongly basic sites provided by the supports, which include poly(4-vinylpyridine), magnesium oxide, functionalized multi-walled carbon nanotubes, and graphene oxide. The new materials display a good potential as catalysts

  2. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  3. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  4. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  5. High speed low damage grinding of advanced ceramics - Phase II Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Kovach, J.A.; Malkin, S.

    2000-02-01

    In the manufacture of structural ceramic components, grinding costs can comprise up to 80% of the entire manufacturing cost. As a result, one of the most challenging tasks faced by manufacturing process engineers is the development of a ceramic finishing process to maximize part throughput while minimizing costs and associated scrap levels. The efforts summarized in this report represent the second phase of a program whose overall objective was to develop a single-step, roughing-finishing process suitable for producing high-quality silicon nitride parts at high material removal rates and at substantially lower cost than traditional, multi-stage grinding processes. More specifically, this report provides a technical overview of High-Speed, Low-Damage (HSLD) ceramic grinding which employs elevated wheel speeds to achieve the small grain depths of cut necessary for low-damage grinding while operating at relatively high material removal rates. The study employed the combined use of laboratory grinding tests, mathematical grinding models, and characterization of the resultant surface condition. A single-step, roughing-finishing process operating at high removal rates was developed and demonstrated.

  6. History of nuclear technology development in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp [Visiting Professor, at the Faculty of Petroleum and Renewable Energy Engineering, University Teknologi Malaysia Johor Bahru 81310 (Malaysia); General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195 (Japan)

    2015-04-29

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  7. EMI Architecture and Technology Development Plan

    CERN Document Server

    Balazs, K.

    2013-01-01

    This document provides a brief overview of the EMI architecture and the technology development directions presented by the four EMI technology areas and by EMI partners. The report represents the final revision of EMI technology planning covering a time period beyond the project end.

  8. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  9. Research on the processing speed of cam grinding

    Science.gov (United States)

    Peng, Baoying; Han, Qiushi

    2011-05-01

    Cam Grinding is a special kind of non-circular machining. The processing speed of cam grinding has a major influence on cam machining precision. In this paper, decomposed the X-axis feed speed and C-axis velocity by the tangential speed and normal speed in accordance with the curvature circle at the point of cam profile grinding. Proposed the cam grinding processing speed model and linear velocity calculation formula, the processing experiment on the CNC camshaft grinding machine results show that the cam grinding speed model is correct. Constant angular speed grinding and constant linear speed grinding are analyzed respectively, which provides a theoretical basis for cam grinding processing speed optimization.

  10. A Review of Literature on analysis of JIG Grinding Process

    DEFF Research Database (Denmark)

    Sudheesh, P. K.; Puthumana, Govindan

    2016-01-01

    in jig grinding, because of their uniformity and purity. In this paper, abrief review of the analysis of jig grinding process considering various research trends is presented. The areas highlighted are: optimization, selection of abrasives, selection of processing conditions and practical considerations......Jig grinding is a process practically used by tool and die makers in the creation of jigs or mating holes and pegs on dies.The abrasives normally used in jig grinding are divided into Natural Abrasives and Artificial Abrasives. Artificial Abrasiveare preferred in manufacturing of grinding wheels....... The optimization of parameters in jig grinding process is important to maximize productivity and to improve quality. The abrasives of hard jig grinding wheels get blunt quickly so these are recommended to grind workpiece of low hardness and soft grinding wheels are recommended for hard material workpieces. The jig...

  11. ONLINE GRINDING WHEEL WEAR COMPENSATION BY IMAGE BASED MEASURING TECHNIQUES

    Institute of Scientific and Technical Information of China (English)

    WAN Daping; HU Dejin; WU Qi; ZHANG Yonghong

    2006-01-01

    Automatic compensation of grinding wheel wear in dry grinding is accomplished by an image based online measurement method. A kind of PC-based charge-coupled device image recognition system is schemed out, which detects the topography changes of the grinding wheel surface. Profile data, which corresponds to the wear and the topography, is measured by using a digital image processing method. The grinding wheel wear is evaluated by analyzing the position deviation of the grinding wheel edge. The online wear compensation is achieved according to the measure results. The precise detection and automatic compensation system is integrated into an open structure CNC curve grinding machine. A practical application is carried out to fulfil the precision curve grinding. The experimental results confirm the benefits of the proposed techniques, and the online detection accuracy is less than 5 μm. The grinding machine provides higher precision according to the in-process grinding wheel error compensation.

  12. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; Meseroll, Robert; Quiter, John; Shannon, Russell; Easton, John W.; Madaras, Eric I.; BrownTaminger, Karen M.; Tabera, John T.; Tellado, Joseph; Williams, Marth K.; Zeitlin, Nancy P.

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  13. Technology Development Roadmaps - a Systematic Approach to Maturing Needed Technologies

    Energy Technology Data Exchange (ETDEWEB)

    John W. Colllins; Layne Pincock

    2010-07-01

    Abstract. Planning and decision making represent important challenges for all projects. This paper presents the steps needed to assess technical readiness and determine the path forward to mature the technologies required for the Next Generation Nuclear Plant. A Technology Readiness Assessment is used to evaluate the required systems, subsystems, and components (SSC) comprising the desired plant architecture and assess the SSCs against established Technology Readiness Levels (TRLs). A validated TRL baseline is then established for the proposed physical design. Technology Development Roadmaps are generated to define the path forward and focus project research and development and engineering tasks on advancing the technologies to increasing levels of maturity. Tasks include modeling, testing, bench-scale demonstrations, pilot-scale demonstrations, and fully integrated prototype demonstrations. The roadmaps identify precise project objectives and requirements; create a consensus vision of project needs; provide a structured, defensible, decision-based project plan; and, minimize project costs and schedules.

  14. Oil heat technology research and development

    Energy Technology Data Exchange (ETDEWEB)

    Kweller, E.R. [Department of Energy, Washington, DC (United States); McDonald, R.J. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    The purpose of this United States Department of Energy (DOE)/Brookhaven National Laboratory (BNL) program is to develop a technology base for advancing the state-of-the-art related to oilfired combustion equipment. The major thrust is through technology based research that will seek new knowledge leading to improved designs and equipment optimization. The Combustion Equipment space Conditioning Technology program currently deals exclusively with residential and small commercial building oil heat technology.

  15. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  16. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  17. Open Technology Development: Roadmap Plan

    Science.gov (United States)

    2006-04-01

    Linux Apache MySql (PHP/ Perl /Python) integrated services. This standardized "stack" of open source technologies enables robust web based information...ACTD Office • Sue Payton, AS&C Office • LTG Robert M. Shea, Joint Staff, J-6 • David Scantling, OSD, Business Transformation Office • Fritz

  18. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  19. Technological Developments in Networking, Education and Automation

    CERN Document Server

    Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif

    2010-01-01

    "Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent

  20. Latest development of display technologies

    Science.gov (United States)

    Gao, Hong-Yue; Yao, Qiu-Xiang; Liu, Pan; Zheng, Zhi-Qiang; Liu, Ji-Cheng; Zheng, Hua-Dong; Zeng, Chao; Yu, Ying-Jie; Sun, Tao; Zeng, Zhen-Xiang

    2016-09-01

    In this review we will focus on recent progress in the field of two-dimensional (2D) and three-dimensional (3D) display technologies. We present the current display materials and their applications, including organic light-emitting diodes (OLEDs), flexible OLEDs quantum dot light emitting diodes (QLEDs), active-matrix organic light emitting diodes (AMOLEDs), electronic paper (E-paper), curved displays, stereoscopic 3D displays, volumetric 3D displays, light field 3D displays, and holographic 3D displays. Conventional 2D display devices, such as liquid crystal devices (LCDs) often result in ambiguity in high-dimensional data images because of lacking true depth information. This review thus provides a detailed description of 3D display technologies.

  1. Research on Ultrasonic Vibration Grinding of the Hard and Brittle Materials

    Institute of Scientific and Technical Information of China (English)

    YANG Xin-hong; HAN Jie-cai; ZHANG Yu-min; ZUO Hong-bo; ZHANG Xue-jun

    2006-01-01

    It is well known that grinding techniques are main methods to machine hard and brittle materials such as engineering ceramics. But the conventional grinding has many shortcomings such as poorer surface finish, quicker wear and tear of grinding tools, lower efficiency and so on. Ultrasonic vibration grinding (UVG) which combines ultrasonic machining and grinding emerged as a developing and promising technique in recent years. In this paper, experimental studies on UVG were conducted on several kinds of hard and brittle material by altering processing parameters such as vibration frequency and its amplitude, diamond abrasive grit size, cutting depth, feeding speed and rotary speed of tools. The experimental results show that alteration in any of above mentioned parameters will bring effects on the processed surface finish of these materials. Of them, the diamond abrasive grit size has the greatest. Moreover, conventional grinding experiments were also carried out on these materials. By comparison, it was found that the UVG is superior to the conventional method in terms of the ground surface quality, the working efficiency and the wear rate of tools.

  2. Multiobjective Optimization of ELID Grinding Process Using Grey Relational Analysis Coupled with Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    S. Prabhu

    2014-06-01

    Full Text Available Carbon nanotube (CNT mixed grinding wheel has been used in the electrolytic in-process dressing (ELID grinding process to analyze the surface characteristics of AISI D2 Tool steel material. CNT grinding wheel is having an excellent thermal conductivity and good mechanical property which is used to improve the surface finish of the work piece. The multiobjective optimization of grey relational analysis coupled with principal component analysis has been used to optimize the process parameters of ELID grinding process. Based on the Taguchi design of experiments, an L9 orthogonal array table was chosen for the experiments. The confirmation experiment verifies the proposed that grey-based Taguchi method has the ability to find out the optimal process parameters with multiple quality characteristics of surface roughness and metal removal rate. Analysis of variance (ANOVA has been used to verify and validate the model. Empirical model for the prediction of output parameters has been developed using regression analysis and the results were compared for with and without using CNT grinding wheel in ELID grinding process.

  3. Microhole Drilling Tractor Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Western Well Tool

    2007-07-09

    In an effort to increase the U.S. energy reserves and lower costs for finding and retrieving oil, the USDOE created a solicitation to encourage industry to focus on means to operate in small diameter well-Microhole. Partially in response to this solicitation and because Western Well Tool's (WWT) corporate objective to develop small diameter coiled tubing drilling tractor, WWT responded to and was awarded a contract to design, prototype, shop test, and field demonstrate a Microhole Drilling Tractor (MDT). The benefit to the oil industry and the US consumer from the project is that with the MDT's ability to facilitate Coiled Tubing drilled wells to be 1000-3000 feet longer horizontally, US brown fields can be more efficiently exploited resulting in fewer wells, less environmental impact, greater and faster oil recovery, and lower drilling costs. Shortly after award of the contract, WWT was approached by a major oil company that strongly indicated that the specified size of a tractor of 3.0 inches diameter was inappropriate and that immediate applications for a 3.38-inch diameter tractor would substantially increase the usefulness of the tool to the oil industry. Based on this along with an understanding with the oil company to use the tractor in multiple field applications, WWT applied for and was granted a no-cost change-of-scope contract amendment to design, manufacture, assemble, shop test and field demonstrate a prototype a 3.38 inch diameter MDT. Utilizing existing WWT tractor technology and conforming to an industry developed specification for the tool, the Microhole Drilling Tractor was designed. Specific features of the MDT that increase it usefulness are: (1) Operation on differential pressure of the drilling fluid, (2) On-Off Capability, (3) Patented unique gripping elements (4) High strength and flexibility, (5) Compatibility to existing Coiled Tubing drilling equipment and operations. The ability to power the MDT with drilling fluid results in a

  4. Miniature-MCA technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Halbig, J.K.; Klosterbuer, S.F.; Stephens, M.M.; Biddle, R.S.

    1991-12-31

    We have recently reduced the size of multichannel analyzers (MCAs) and have implemented more features in hardware to relieve software requirements. We built and tested a spectroscopy grade, 4096-channel MCA. Exclusive of amplifier and power supply, it fits on two boards each approximately 7 by 15 cm. This paper discusses the features and performance of the analyzer and some reasonable applications of these technologies.

  5. KNOWLEDGE SYNTHESIS IN TECHNOLOGY DEVELOPMENT

    Institute of Scientific and Technical Information of China (English)

    Yukihiro YAMASHITA; Yoshiteru NAKAMORI; Andrzej P. WIERZBICKI

    2009-01-01

    This paper introduces a knowledge construction model called the i-System for knowledge integration and creation and its relation to the new concept of the Creative Space. The five ontological elements of the i-System are Intelligence, Involvement, Imagination, Intervention, and Integration corresponding to five diverse dimensions of the Creative Space. The paper discusses the meanings and functions of these dimensions in knowledge integration and creation, and presents applications of the i-System to technology roadmapping and archiving.

  6. Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  7. Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne L.

    2017-08-23

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  8. Aligning Technology Education Teaching with Brain Development

    Science.gov (United States)

    Katsioloudis, Petros

    2015-01-01

    This exploratory study was designed to determine if there is a level of alignment between technology education curriculum and theories of intellectual development. The researcher compared Epstein's Brain Growth Theory and Piaget's Status of Intellectual Development with technology education curriculum from Australia, England, and the United…

  9. Social and Technological Development in Context

    DEFF Research Database (Denmark)

    Koch, Christian

    1997-01-01

    This papers studies the processes developing technology and its social "sorroundings", the social networks. Positions in the debate on technological change is discussed. A central topic is the enterprise external development and decision processes and their interplay with the enterprise internal...

  10. TECHNOLOGICAL DEVELOPMENT MANAGEMENT UNDER GLOBALIZATION CONDITIONS

    Directory of Open Access Journals (Sweden)

    Vasyl H. Gerasymchuk

    2007-10-01

    Full Text Available The research reveals a studying of scientific and technical development of enterprise in the context of globalization processes. The authors placed high emphasis on the specification of peculiarities and theoretical aspects of scientific and technical development of enterprise, the studying of impact of scientific and technical factors of economic development. The R&D financing in Ukraine and the strong and weak sides of application of model of technological development at international technology transfer are analyzed in the paper.

  11. Development of technologies for solar energy utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

  12. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  13. Analysis on the grinding quality of palm oil fibers by using combined grinding equipment

    Science.gov (United States)

    Gan, H. L.; Gan, L. M.; Law, H. C.

    2015-12-01

    As known, Malaysia is the second largest palm oil producer worldwide after Indonesia, therefore indicating the abundance of its wastes within the country. The plantation would be seen to increase to at least 5.2 million ha by 2020, and the waste generation would be 50-70 times the plantation. However, the efficiency of bulk density is reduced. This is one of the main reasons of the initiation of this size reduction/ grinding research. With appropriate parameters, grinding will be seen to be helping in enhancing the inter-particle bindings, subsequently increasing the quality of final products. This paper focuses on the grinding quality involving palm oil wastes by using the Scanning Electron Microscope (SEM). The samples would first be ground to powder at varying grinding speed and finally got the randomly chosen particles measured to obtain the size range. The grinding speed was manipulated from 15 Hz to 40 Hz. From the data obtained, it was found the particles fineness increased with increasing grinding speed. In general, the size ranged from 45 μm to about 600 μm, where the finest was recorded at the speed of 40 Hz. It was also found that the binding was not so encouraging at very low speeds. Therefore, the optimum grinding speed for oil palm residues lied in the range of 25 Hz to 30 Hz. However, there were still limitations to be overcome if the accuracy of the image clarity is to be enhanced.

  14. Space Technology Mission Directorate: Game Changing Development

    Science.gov (United States)

    Gaddis, Stephen W.

    2015-01-01

    NASA and the aerospace community have deep roots in manufacturing technology and innovation. Through it's Game Changing Development Program and the Advanced Manufacturing Technology Project NASA develops and matures innovative, low-cost manufacturing processes and products. Launch vehicle propulsion systems are a particular area of interest since they typically comprise a large percentage of the total vehicle cost and development schedule. NASA is currently working to develop and utilize emerging technologies such as additive manufacturing (i.e. 3D printing) and computational materials and processing tools that could dramatically improve affordability, capability, and reduce schedule for rocket propulsion hardware.

  15. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  16. Technologies for a sustainable development; Technologies pour un developpement durable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The European Event on Technology (EET), a recurrent annual event since 1992, is a major meeting opportunity for researchers and engineers as well as private and public decision-makers, on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview of recently acquired or upcoming technologies developed by sector: energy, transports, new information technologies, new industrial manufacturing technologies (materials, products, services), waste management, global environment monitoring, water management, bio-technologies, and innovation management. This document brings together the different talks given by the participants. Among these, the following ones fall into the energy and environment scope: energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy systems; modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; global change: causes, modeling and economic issues; the GMES

  17. Taiwan Perspective: Developing Smart Living Technology

    Directory of Open Access Journals (Sweden)

    Chih-Kung Lee

    2011-09-01

    Full Text Available The pursuit of Smart Living Technology is a recent trend in which technology is applied to daily life to increase efficiency, affordability and sustainability. The principle behind Smart Living Technology is that technology should be used to advance the needs of human beings and to increase the quality of life by the power of human creativity while at the same time sustaining the environment for future generations. As such, intelligent networks should be adopted to provide humans with full information to control an individual’s personal environment. Wireless technology can play a key role in enabling smart energy monitoring by allowing consumers to make more informed choices and to connect products and devices to a coordinated management system. The development of Smart Living Technology is based on the concept of user driven innovations. Various Living Labs have been established around the world as development centers for extension of this Smart Living Technology. In this paper, the background and current developments of Smart Living Technology are reviewed, followed by real examples taking place in Taiwan. Finally, the focus and future plan for Taiwan are discussed including a strategy for further development of Smart Living Technology in Taiwan.

  18. Cleaner technology development--some practical steps for developing countries.

    Science.gov (United States)

    Rathi, A K A; Bhanujan, K V

    2004-10-01

    Cleaner technologies often originate from developed countries. Little developmental work is continued on the products sourced from developing countries. These products are by and large low value products generating large quantities of hazardous waste per unit of production. Methodology is proposed for phasing out such dirty technologies! products. The development of cleaner technologies is proposed for utilizing large quantity of hazardous waste generated from identified manufacturing process.

  19. Development of nuclear transmutation technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Seok; Song, Tae Young; Yoo, Jae Kwon; Choi, Byung Ho; Shin, Hee Sung; Gil, Chung Sup; Kim, Jung Do

    1997-08-01

    A basic characteristics and neutronic code development for accelerator driven subcritical reactor have been performed. In the field of basic characteristic study, the world-wide technical trends for a subcritical reactor has been investigated and some new directions for the subcritical system development were investigated. For the analysis of subcritical reactor core, a Montecarlo depletion code was developed by combining LAHET code with ORIGEN2 code. In addition, one-point kinetics equation for subcritical reactor programmed in order to analyze the dynamic behavior of subcritical core. (author). 26 tabs., 49 figs.

  20. Coherent Architecture Development as a Basis for Technology Development

    DEFF Research Database (Denmark)

    Ravn, Poul Martin

    coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... for product developers. Technologies, which in their infancy indicate a 'jack of all trades, master of none', have a risk of being developed without a clearly defined need or identification of which products it can be used in. A common approach for developing such a technology includes exploration of what...

  1. Development of krypton recovery and storage technology

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Shin-ichiro; Shoji, Hisashi; Kurihara, Takayuki; Kawashima, Nobuyoshi [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan); Osawa, Toshiyuki; Yamato, Haruo; Aizawa, Toshihiro [Sanko Inc., Tokyo (Japan)

    2002-12-01

    The Krypton-Recovery Development Facility was constructed as a pilot plant which has a piratical capacity at Tokai Reprocessing Plant. Various tests such as performance confirmation corresponding to parameter changing of each process by cold test, safety assurance of confinement performance of radioactive gas etc. and confirmation of the krypton recovery rate by connecting run with the reprocessing process were executed in order to develop recovery and storage technology of radioactive krypton from the shearing and dissolution process off-gas aiming to reduce the release of radioactivity to the environment. As a result, it was assured that krypton recovery rate with a cryogenic distillation was beyond the target value of 90% as krypton recovery technology, and storage technology by high pressure cylinder method was established as storage technology of recovered krypton. The immobilization technology of recovered krypton that is necessary for long term storage by ion implantation method is under development. (author)

  2. Technological Microbiology: Development and Applications

    Science.gov (United States)

    Vitorino, Luciana C.; Bessa, Layara A.

    2017-01-01

    Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services. PMID:28539920

  3. Technological opportunities and paths of development

    DEFF Research Database (Denmark)

    Plichta, Kirsten

    1993-01-01

    in the industry. 6) It is argued that such paths of incremental improvement at the industry level may be an outcome of a) the dynamics that produce the technological opportunities; b) the institutions that govern decisions and expectations and c) the criteria by which the chooses between different firms......Executive summary: 1) The technological development of firms in an industry is influenced by the opportunities for improving product and process, their ability to identify such opportunities and their ability to appropriate the benefit of the development effort. 2) Firms' historically developed...... technological knowledge, their production, development and other routines as well prior investments in products and production equipment play an important role with regard to the technological opportunities that firms' identify and select for development. 3) Because history matters and because firms are bounded...

  4. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end......-users. The CTA methodology is based on a Socio-technical understanding of technological development as an open ended, emergent process. The CTA was used during the EHR development process in the Region of North Jutland where it proved successful inproviding learning and feedback between all relevant groups...

  5. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  6. Cognitive development in advanced mathematics using technology

    Science.gov (United States)

    Tall, David

    2000-12-01

    This paper considers cognitive development in mathematics and its relationship with computer technology, with special emphasis on the use of visual imagery and symbols and the later shift to formal axiomatic theories. At each stage, empirical evidence is presented to show how these forms of thinking are enhanced, changed, or impeded by the use of technology.

  7. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  8. Development of PLC Technology in China

    Institute of Scientific and Technical Information of China (English)

    Liu Jianming; Cuiwei

    2005-01-01

    In China there built a large scale of power line communication (Abbr. PLC)testing network. This paper presents the research and development on PLC technology in China and also the application and popularization of PLC in Chinese market. At the end, the next focal points of PLC technology research are deeply discussed.

  9. China's High-technology Standards Development

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    There are several major technology standards, including audio video coding (AVS), automotive electronics, third generation (3G) mobile phones, mobile television, wireless networks and digital terrestrial television broadcasting, that have been released or are currently under development in China. This article offers a detailed analysis of each standard and studies their impact on China's high-technology industry.

  10. [Pharmaceutical technology: development and research].

    Science.gov (United States)

    Traisnel, M

    1994-06-01

    Production of pharmaceutics cannot be compared to the manufacture of consumer goods: pharmaceutical manufacturing is the study and bulk manufacture of the ingredients from which medicines are made, and is concerned with the mixing, preparing, packing, of the ingredients into a dosage form for the patient, in according to the good manufacturing practices (GMP). Development and manufacture are not discrete activities but links in a single chain of activity. Research and development, pharmaceutical training, regulatory requirements: these concepts are present with three ways: bioavailability, targeting and compliance.

  11. Development of hydrogen storage technologies

    CSIR Research Space (South Africa)

    Langmi, Henrietta W

    2015-10-01

    Full Text Available The use of hydrogen to deliver energy for cars, portable devices and buildings is seen as one of the key steps to reduce greenhouse gas emissions. South Africa’s national hydrogen strategy, HySA, aims to develop and guide innovation along the value...

  12. Developments in Science and Technology

    Science.gov (United States)

    1979-01-01

    dation by Navy Antarctic Development Squadron Sixco im) rtu ;R Rsusn(rgnGaut (VXE-6). Figure 1 shows the polar research aircraft at Center), h rbnadm...perits inu /t sialler quantities of winu- (see Ref. I foi a surs e)). In particular, it found earl) spherit. tracers to be Ietec tedl than isas pretimish

  13. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  14. Geo energy research and development: technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Traeger, R.K.

    1982-03-01

    Sandia Geo Energy Programs related to geothermal, coal, oil and gas, and synfuel resources have provided a useful mechanism for transferring laboratory technologies to private industry. Significant transfer of hardware, computer programs, diagnostics and instrumentation, advanced materials, and in situ process understanding has occurred through US/DOE supported programs in the past five years. The text briefly reviews the technology transfer procedures and summarizes 32 items that have been transferred and another 20 technologies that are now being considered for possible transfer to industry. A major factor in successful transfer has been personal interactions between Sandia engineers and the technical staff from private industry during all aspects of the technology development.

  15. Space power development impact on technology requirements

    Science.gov (United States)

    Cassidy, J. F.; Fitzgerald, T. J.; Gilje, R. I.; Gordon, J. D.

    1986-01-01

    The paper is concerned with the selection of a specific spacecraft power technology and the identification of technology development to meet system requirements. Requirements which influence the selection of a given technology include the power level required, whether the load is constant or transient in nature, and in the case of transient loads, the time required to recover the power, and overall system safety. Various power technologies, such as solar voltaic power, solar dynamic power, nuclear power systems, and electrochemical energy storage, are briefly described.

  16. Nuclear Technology for the Sustainable Development Goals

    Science.gov (United States)

    Darby, Iain

    2017-01-01

    Science, technology and innovation will play a crucial role in helping countries achieve the ambitious Sustainable Development Goals (SDGs). Since the discovery of nuclear fission in the 1930s, the peaceful applications of nuclear technology have helped many countries improve crops, fight pests, advance health, protect the environment and guarantee a stable supply of energy. Highlighting the goals related to health, hunger, energy and the environment, in this presentation I will discuss how nuclear technology contributes to the SDGs and how nuclear technology can further contribute to the well-being of people, help protect the planet and boost prosperity.

  17. Effection of grinding system rigidity ultra-precision grinding of aspheric mould and error compensation

    Science.gov (United States)

    Yin, S. H.; Gong, S.

    2016-10-01

    In ultra-precision oblique axis grinding process for machining micro aspherical mould, form error of aspherical surface is caused by the inconsistence elastic deformation of grinding system, which derived from differences velocity from inside to out. In this case, whole PV value can meet requirements, however, pits are produced in central after error compensation, which is unworkable. In this paper, mechanism of machining error caused by grinding system rigidity is analyzed, and experiments are carried out. Form error compensation grinding are carried out in the central local area, based on traditional error compensation method, which can effectively eliminate the pits of surface center. In this method, cemented carbide YG8 which diameter is about 6mm is ground. The results showed that the form accuracy under PV 200 nm and under PV 50 nm within the scope of 1 mm, and the surface roughness under Ra2nm.

  18. Grinding of WC–Co hardmetals

    NARCIS (Netherlands)

    Hegeman, J.B.J.W.; Hosson, J.Th.M. De; With, G. de

    2001-01-01

    This paper concentrates on the morphology of the ground surface of cobalt tungsten carbide (WC) composite materials that belong to the category of so-called hardmetals. A deformed and detached surface layer was found on top of the specimens after surface grinding with a diamond wheel. In order to

  19. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  20. Solar cell materials developing technologies

    CERN Document Server

    Conibeer, Gavin J

    2014-01-01

    This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.

  1. Development of Nuclear Analytical Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Joon; Kim, J. Y.; Sohn, S. C. (and others)

    2007-06-15

    The pre-treatment and handling techniques for the micro-particles in swipe samples were developed for the safeguards purpose. The development of screening technique for the swipe samples has been established using the nuclear fission track method as well as the alpha track method. The laser ablation system to take a nuclear particle present in swipe was designed and constructed for the determination of the enrichment factors for uranium or plutonium, and its performance was tested in atmosphere as well as in vacuum. The optimum conditions for the synthesis of silica based micro-particles were obtained for mass production. The optimum ion exchange resin was selected and the optimum conditions for the uranium adsorption in resin bead technique were established for the development of the enrichment factor for nuclear particles in swipe. The established technique was applied to the swipe taken directly from the nuclear facility and also to the archive samples of IAEA's environmental swipes. The evaluation of dose rate of neutron and secondary gamma-ray for the radiation shields were carried out to design the NIPS system, as well as the evaluation of the thermal neutron concentration effect by the various reflectors. D-D neutron generator was introduced as a neutron source for the NIPS system to have more advantages such as easier control and moderation capability than the {sup 252}Cf source. Simulated samples for explosive and chemical warfare were prepared to construct a prompt gamma-ray database. Based on the constructed database, a computer program for the detection of illicit chemical and nuclear materials was developed using the MATLAB software.

  2. Nigerian Journal of Technological Development: Editorial Policies

    African Journals Online (AJOL)

    Nigerian Journal of Technological Development: Editorial Policies. Journal Home > About the ... Frequency. This journal published two issues, in one volume per year. ... Dept. of Mechanical Engineering,. Mississipi State University,. USA. Prof.

  3. Readiness for banking technologies in developing countries

    African Journals Online (AJOL)

    banking, internet banking and automated teller machine (ATM) banking to ... businesses in developing countries are building unique ways to market products ... characteristics such as technology readiness, it is therefore important for banks in.

  4. Advances in space technology: the NSBRI Technology Development Team.

    Science.gov (United States)

    Maurer, R H; Charles, H K; Pisacane, V L

    2002-01-01

    As evidenced from Mir and other long-duration space missions, the space environment can cause significant alterations in the human physiology that could prove dangerous for astronauts. The NASA programme to develop countermeasures for these deleterious human health effects is being carried out by the National Space Biomedical Research Institute (NSBRI). The NSBRI has 12 research teams, ten of which are primarily physiology based, one addresses on-board medical care, and the twelfth focuses on technology development in support of the other research teams. This Technology Development (TD) Team initially supported four instrumentation developments: (1) an advanced, multiple projection, dual energy X ray absorptiometry (AMPDXA) scanning system: (2) a portable neutron spectrometer; (3) a miniature time-of-flight mass spectrometer: and (4) a cardiovascular identification system. Technical highlights of the original projects are presented along with an introduction to the five new TD Team projects being funded by the NSBRI.

  5. Advances in space technology: the NSBRI Technology Development Team

    Science.gov (United States)

    Maurer, R. H.; Charles, H. K. Jr; Pisacane, V. L.

    2002-01-01

    As evidenced from Mir and other long-duration space missions, the space environment can cause significant alterations in the human physiology that could prove dangerous for astronauts. The NASA programme to develop countermeasures for these deleterious human health effects is being carried out by the National Space Biomedical Research Institute (NSBRI). The NSBRI has 12 research teams, ten of which are primarily physiology based, one addresses on-board medical care, and the twelfth focuses on technology development in support of the other research teams. This Technology Development (TD) Team initially supported four instrumentation developments: (1) an advanced, multiple projection, dual energy X ray absorptiometry (AMPDXA) scanning system: (2) a portable neutron spectrometer; (3) a miniature time-of-flight mass spectrometer: and (4) a cardiovascular identification system. Technical highlights of the original projects are presented along with an introduction to the five new TD Team projects being funded by the NSBRI.

  6. Development and Application of Universal Formability Technology

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Using mathematical plasticity theories, universal formability (UF) technology has been developed and applied in the automotive stamping engineering and production. As a formability analysis tool, this technology is the major methodology for the development of stamping expert system (solution provider) for (a) product design and feasibility analysis, (b) material automatic selection using nomograms, (c) draw die design using pre-models, and (d) UF and robustness analysis of die performance in finite element analysis (FEA) environment.

  7. Technological Development and Software Piracy

    OpenAIRE

    Romeu, Andrés; Martínez Sánchez, Francisco

    2015-01-01

    In this paper, we analyze the differences in piracy rates from one country to another. Like previous papers on the topic, we find that more developed countries have lower incentives for pirating. Unlike previous papers, we find that the piracy rate is positively correlated with the tax burden rate but negatively correlated with the domestic market size and exports over GDP. We also separate the impacts of education and R&D on piracy, and find two effects with opposite signs. Moreover, we find...

  8. A development of the stabilization technology for the solid form of radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T. G.; Lee, Y. H.; Lee, K. M.; Ann, S. J.; Son, J. S. [KAERI, Taejon (Korea, Republic of)

    2003-07-01

    In this study, a modified bituminization technology has been developed, which needs no grinding of the granular resin waste, and enables the solid form to keep its shape stability as good as that of a cemented solid form. Also, the study intended to apply the developed technology to the practical treatment of radioactive resin waste. In the experiment, the granular type resin was used and the straight-run distillation bitumen with penetration rate 60/70 was used as the solidifying agent. The PE was used as the additive. The shape stability increased remarkably with the additive of PE, which act as a binder in the solid form. The shape of the solid from was maintained without failure during the long-term exposure test when the additive content of spent PE is more than 10 wt %. The proper ranges of bitumen content, PE content and operating temperature are 30-50 wt %, 10-20 wt % and 180.deg.C respectively. The bituminized solid form of radioactive resin waste by the technology of this study has the remarkably superior quality than the conventional solid forms, partially for the shape stability.

  9. A development of the stabilization technology for the solid form of ion exchange resin

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T. K.; Lee, Y. H.; Kang, I. S.; Bae, S. M; Ahn, S. J.; Lee, K. M.; Kim, K. J.; Son, J. S.; Hong, K. P. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    In this study, a modified bituminization technology has been developed, which needs no grinding of the granular resin waste, and enables the solid form to keep its shape stability as good as that of a cemented solid form. Also, the study intended to apply the developed technology to the practical treatment of radioactive resin waste. In the experiment, the granular type resin was used and the straight-run distillation bitumen with penetration rate 60/70 was used as the solidifying agent. The PE was used as the additive. The shape stability increased remarkably with the additive of PE, which act as a binder in the solid form. The shape of the solid form was maintained without failure during the long-term exposure test when the additive content of spent PE is more than 10wt %. The proper ranges of bitumen content, PE content and operating temperature are 30-50wt%, 10-20wt% and 180 .deg. C respectively. The bituminized solid form of radioactive resin waste by the technology of this study has the remarkably superior quality than the conventional solid forms, partially for the shape stability.

  10. NASA Advanced Radiator Technology Development

    Science.gov (United States)

    Koester, J. Kent; Juhasz, Albert J.

    1994-07-01

    A practical implementation of the two-phase working fluid of lithium and NaK has been developed experimentally for pumped loop radiator designs. The benefits of the high heat capacity and low mass of lithium have been integrated with the shutdown capability enabled by the low freezing temperature of NaK by mixing these liquid metals directly. The stable and reliable start up and shutdown of a lithium/NaK pumped loop has been demonstrated through the development of a novel lithium freeze-separation technique within the flowing header ducts. The results of a highly instrumented liquid metal test loop are presented in which both lithium fraction as well as loop gravitational effects were varied over a wide range of values. Diagnostics based on dual electric probes are presented in which the convective behavior of the lithium component is directly measured during loop operation. The uniform distribution of the lithium after a freeze separation is verified by neutron radiography. The operating regime for reliable freeze/thaw flow behavior is described in terms of correlations based on dimensional analysis.

  11. Global Nuclear Energy Partnership Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    David J. Hill

    2007-07-01

    This plan describes the GNEP Technology Demonstration Program (GNEP-TDP). It has been prepared to guide the development of integrated plans and budgets for realizing the domestic portion of the GNEP vision as well as providing the basis for developing international cooperation. Beginning with the GNEP overall goals, it describes the basic technical objectives for each element of the program, summarizes the technology status and identifies the areas of greatest technical risk. On this basis a proposed technology demonstration program is described that can deliver the required information for a Secretarial decision in the summer of 2008 and support construction of facilities.

  12. Survey of Technologies for Web Application Development

    CERN Document Server

    Doyle, Barry

    2008-01-01

    Web-based application developers face a dizzying array of platforms, languages, frameworks and technical artifacts to choose from. We survey, classify, and compare technologies supporting Web application development. The classification is based on (1) foundational technologies; (2)integration with other information sources; and (3) dynamic content generation. We further survey and classify software engineering techniques and tools that have been adopted from traditional programming into Web programming. We conclude that, although the infrastructure problems of the Web have largely been solved, the cacophony of technologies for Web-based applications reflects the lack of a solid model tailored for this domain.

  13. Developing Technological Capabilities in Agro-Industry

    DEFF Research Database (Denmark)

    Whitfield, Lindsay

    2012-01-01

    This article examines the emergence and trajectory of a new agro-industry in Ghana, the pineapple export industry, using the technological capabilities approach. It explains the limited expansion of the industry and its declining competitiveness in the face of new competition by looking at how...... Ghanaian exporters developed technological capabilities initially and the incentives and disincentives to building on those capabilities. The article argues that at the heart of the industry's crisis was an inability to further develop technological capabilities. The crisis had systemic features that have...

  14. Electrolytic In-process Dressing (ELID) for high-efficiency, precision grinding of ceramic parts: An experiment study

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, B.P.

    1995-08-01

    This report describes Electrolytic In-process Dressing (ELID) as applied to the efficient, high-precision grinding of structural ceramics, and describes work performed jointly by Dr. B.P. Bandyopadhyay, University of North Dakota, and Dr. R. Ohmori, of the Institute of Physical and Chemical Research (RINEN), Tokyo, Japan, from June through August, 1994. Dr. Ohmori pioneered the novel ELID grinding technology which incorporates electrolytically enhanced, in-process dressing of metal bonded superabrasive wheels. The principle of ELID grinding technology is discussed in the report as will its application for rough grinding and precision grinding. Two types of silicon nitride based ceramics (Kyocerals Si{sub 3}N{sub 4}, and Eaton`s SRBSN) were ground under various conditions with ELID methods. Mirror surface finishes were obtained with {number_sign} 4000 mesh size wheel (average grain size = 4 {mu}m). Results of these investigations are presented in this report. These include the effects of wheel bond type, type of power supply, abrasive grit friability, and cooling fluid composition. The effects of various parameters are discussed in terms of the mechanisms of ELID grinding, and in particular, the manner of boundary layer formation on the wheels and abrasive grit protrusion.

  15. Banking, Technology Workers and Their Career Development.

    Science.gov (United States)

    Armstrong, Lesley; West, Jim

    2001-01-01

    An Australian bank developed a four-stage career development strategy for information technology workers: (1) career coaching sessions with executives; (2) career coaching seminars for line managers and team leaders; (3) staff career planning workshops; and (4) online career development support. The program resulted in increased satisfaction,…

  16. The Public Sphere, Globalization and Technological Development

    OpenAIRE

    Tina Sikka

    2006-01-01

    Tina Sikka examines the emergence and transformation of Habermas's theory of the public sphere, looking at how this concept informs the debates around communication technologies in development. Development (2006) 49, 87–93. doi:10.1057/palgrave.development.1100277

  17. Capitalizing on App Development Tools and Technologies

    Science.gov (United States)

    Luterbach, Kenneth J.; Hubbell, Kenneth R.

    2015-01-01

    Instructional developers and others creating apps must choose from a wide variety of app development tools and technologies. Some app development tools have incorporated visual programming features, which enable some drag and drop coding and contextual programming. While those features help novices begin programming with greater ease, questions…

  18. FY 1999 report on the development of technology to recycle architectural waste materials, glass, etc. Development of technology to recycle architectural waste materials; 1999 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    Waste wood materials in the materials discharged from architectural disassembly were regarded as a potential wood resource, and the R and D of the technology to recycle these were conducted. Studies were made on the technology to finely grind waste wood materials, technology to compress/form waste wood materials and ground wood powder, verification of strength characteristics/dimension stability of the formed wood materials, etc. As to the wood materials which were badly degraded under ultra violet rays, they were coloring-processed by the steam treatment, and a possibility of coating substitution was confirmed. In relation to the technology to produce compressed wood materials, the optimization of heat treatment conditions was experimentally conducted. About the technology to give dimensional stability, dimensional stability was improved as a result of the improvement of chemicals feeding and the development of chemically processed drugs. In the development of light formed products, the board was successfully formed which is light in weight using lignocelluloses/inorganic hydrates and has the bending strength higher than that of the plaster board. In the development of interior materials, the technology was developed in which ground wood powder and thermo-plastic resin are mixed for die molding, and the OA floor using this was commercialized. (NEDO)

  19. Development of laser technology in Poland: 2016

    Science.gov (United States)

    Jankiewicz, Zdzisław; Jabczyński, Jan K.; Romaniuk, Ryszard S.

    2016-12-01

    The paper is an introduction to the volume of proceedings and a concise digest of works presented during the XIth National Symposium on Laser Technology (SLT2016) [1]. The Symposium is organized since 1984 every three years [2-8]. SLT2016 was organized by the Institute of Optoelectronics, Military University of Technology (IO, WAT) [9], Warsaw, with cooperation of Warsaw University of Technology (WUT) [10], in Jastarnia on 27-30 September 2016. Symposium Proceedings are traditionally published by SPIE [11-19]. The meeting has gathered around 150 participants who presented around 120 research and technical papers. The Symposium, organized every 3 years is a good portrait of laser technology and laser applications development in Poland at university laboratories, governmental institutes, company R&D laboratories, etc. The SLT also presents the current technical projects under realization by the national research, development and industrial teams. Topical tracks of the Symposium, traditionally divided to two large areas - sources and applications, were: laser sources in near and medium infrared, picosecond and femtosecond lasers, optical fiber lasers and amplifiers, semiconductor lasers, high power and high energy lasers and their applications, new materials and components for laser technology, applications of laser technology in measurements, metrology and science, military applications of laser technology, laser applications in environment protection and remote detection of trace substances, laser applications in medicine and biomedical engineering, laser applications in industry, technologies and material engineering.

  20. SMD Technology Development Story for NASA Annual Technology report

    Science.gov (United States)

    Seablom, Michael S.

    2017-01-01

    The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

  1. Simulation of Flow and Heat Transfer of Mist/Air Impinging Jet on Grinding Work-Piece

    OpenAIRE

    Fan Jiang; Han Wang; Yijun Wang; Jianhua Xiang

    2016-01-01

    The numerical investigation is presented for flow and heat transfer on grinding work-piece with mist/air impinging jet by using DPM (discrete phase model) model. The tracks of the mist droplets show most of them are accumulated on the right surface of grinding zone, and can be influenced by the rotating speed of the grinding wheel, the position and the number of the jet nozzle. The mechanism model of enhance cooling by mist/air impinging jet is developed, which indicated the mist droplet is a...

  2. Development of ultrasensitive spectroscopic analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. (1) Laser resonance ionization technology, (2) Laser-induced rare isotope detection technology, (3) Laser-induced plasma analysis technology, (4) Microparticle analysis technology by using ion trap, (5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO{sub 2}, SO{sub 2}, etc. (author). 57 refs., 42 figs.

  3. Rheology of coal-water slurries prepared by the HP roll mill grinding of coal. Quarterly technical progress report number 11, March 1--May 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Fuerstenau, D.W.

    1995-06-01

    The objective of this research is the development of improved technology for the preparation of coal-water slurries that have potential for replacing fuel oil in direct combustion. Detailed investigations of the effect of solids content and chemical additives on the rheology of coal-water slurries, prepared with fines produced by the ball milling of Pittsburgh No. 8 coal, were conducted during the first phase of the research program. These experiments were to provide a baseline against which the rheological behavior of slurries prepared with fines produced by high-pressure roll milling or hybrid high-pressure, roll mill/ball mill grinding could be compared. The viscosity of slurries with high solids content is strongly influenced by the packing density of the feed material. The packing density can be significantly altered by mixing distributions of different median sizes, and to an extent by modifying the grinding environment. The research during this quarter was, therefore, directed towards: (1) establishing the relationship between the packing characteristic of fines and the viscosity of slurries prepared with the fines; (2) investigation of the effect of mixing distribution on the rheology; and (3) study of the effect of grinding environment in the ball mill on the rheology of coal-water slurries.

  4. STUDY ON A NEW TYPE OF THROWAWAY SOFT GRINDING WHEELS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In accordance with the difficult problems of belt cross vibrations and effects of belt tension on machine spindle precision in abrasive belt grinding, a new soft grinding wheel is put forward, which is provided with the advantages of belt grinding and can be installed directly on the grinding machine spindle substituting for common grinding wheels. The new soft grinding wheel does not need any ancillary facilities and dressing devices in grinding. With analyzing error of wheel and grinding experiment, the highefficiency grinding characteristics grinding hardbrittle materials has been obtained.

  5. ARE THERE SIGNIFICANT DIFFERENCES BETWEEN DIRECT AND REVERSE GRINDING CIRCUITS?

    Directory of Open Access Journals (Sweden)

    Douglas Batista Mazzinghy

    2014-12-01

    Full Text Available The mining industry is famous for many paradigms regarding different flowsheet designs and the use of new technologies and equipment. In this context, a question often performed to process engineers is: what grinding circuit is more efficient, the direct or the reverse? A precise answer could only be given by experimental data and simulations. Simulations were performed using ModSimTM software considering parameters obtained by batch mill tests of an iron ore sample. The simulations, preliminarily, indicated no significant differences between the two circuit configurations for the sample tested. Subsequently, tests were conducted on a pilot scale with detailed measurement of all the variables necessary for a correct interpretation of the differences between the direct and reverse circuits. The test results confirmed the prediction obtained by simulation. This work provides the basis to test other ores and to understanding better the real differences between grinding circuit configurations. Thus, it is expected that some myths of the mineral industry, with respect to flowsheet choices, are overcome.

  6. Cryogenic Fluid Management Technology Development Roadmaps

    Science.gov (United States)

    Stephens, J. R.; Johnson, W. L.

    2017-01-01

    Advancement in Cryogenic Fluid Management (CFM) Technologies is essential for achieving NASA's future long duration missions. Propulsion systems utilizing cryogens are necessary to achieve mission success. Current State Of the Art (SOA) CFM technologies enable cryogenic propellants to be stored for several hours. However, some envisioned mission architectures require cryogens to be stored for two years or longer. The fundamental roles of CFM technologies are long term storage of cryogens, propellant tank pressure control and propellant delivery. In the presence of heat, the cryogens will "boil-off" over time resulting in excessive pressure buildup, off-nominal propellant conditions, and propellant loss. To achieve long term storage and tank pressure control, the CFM elements will intercept and/or remove any heat from the propulsion system. All functions are required to perform both with and without the presence of a gravitational field. Which CFM technologies are required is a function of the cryogens used, mission architecture, vehicle design and propellant tank size. To enable NASA's crewed mission to the Martian surface, a total of seventeen CFM technologies have been identified to support an In-Space Stage and a Lander/Ascent Vehicle. Recognizing that FY2020 includes a Decision Point regarding the In-Space Stage Architecture, a set of CFM Technology Development Roadmaps have been created identifying the current Technology Readiness Level (TRL) of each element, current technology "gaps", and existing technology development efforts. The roadmaps include a methodical approach and schedule to achieve a flight demonstration in FY2023, hence maturing CFM technologies to TRL 7 for infusion into the In-Space Stage Preliminary Design.

  7. A mathematical model for surface roughness of fluidic channels produced by grinding aided electrochemical discharge machining (G-ECDM)

    OpenAIRE

    Ladeesh V. G.; Manu R

    2017-01-01

    Grinding aided electrochemical discharge machining is a hybrid technique, which combines the grinding action of an abrasive tool and thermal effects of electrochemical discharges to remove material from the workpiece for producing complex contours. The present study focuses on developing fluidic channels on borosilicate glass using G-ECDM and attempts to develop a mathematical model for surface roughness of the machined channel. Preliminary experiments are conducted to study the effect of mac...

  8. HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Richard Tuthill

    2002-07-18

    The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the

  9. Advances in Robotic Servicing Technology Development

    Science.gov (United States)

    Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

    2015-01-01

    NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

  10. Mobile display technologies: Past developments, present technologies, and future opportunities

    Science.gov (United States)

    Ohshima, Hiroyuki

    2014-01-01

    It has been thirty years since the first active matrix (AM) flat panel display (FPD) was industrialized for portable televisions (TVs) in 1984. The AM FPD has become a dominant electronic display technology widely used from mobile displays to large TVs. The development of AM FPDs for mobile displays has significantly changed our lives by enabling new applications, such as notebook personal computers (PCs), smartphones and tablet PCs. In the future, the role of mobile displays will become even more important, since mobile displays are the live interface for the world of mobile communications in the era of ubiquitous networks. Various developments are being conducted to improve visual performance, reduce power consumption and add new functionality. At the same time, innovative display concepts and novel manufacturing technologies are being investigated to create new values.

  11. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  12. Technology developments applied to healthcare/nursing.

    Science.gov (United States)

    Øyri, Karl; Newbold, Susan; Park, Hyeoun-Ae; Honey, Michelle; Coenen, Amy; Ensio, Anneli; Jesus, Elvio

    2007-01-01

    Future technology developments as applied to healthcare and particularly nursing were discussed. Emerging technologies such as genetics, small unobtrusive monitoring devices, use of information and communication technologies are as tools to not only facilitate but also promote communication among all parties of the healthcare process. These emerging technologies can be used for ubiquitous healthcare (u-health). The role of nursing in the u-health is fundamental and required for success and growth. Nursing's role will evolve as nurses become 'information-mediators' in a broader-sense than current role. All technologies will ultimately focus on the consumer through 'behind-the-scenes' data collection, which in turn will also allow nurses to analyze these data to improve care. We need to acknowledge an increased presence and or pervasiveness of information technologies as key components of quality healthcare. This sort of acknowledgment will help propel nursing, and healthcare, to increase use of these tools. To develop nurses with these types of skills the nursing education process will require a fundamental change to integrate these technology-sorts of tools as necessary elements for success.

  13. Heavy Oil Development Technology of Liaohe Oilfield

    Institute of Scientific and Technical Information of China (English)

    Han Yun

    2007-01-01

    @@ Liaohe Oilfield, the largest heavy oil production base in China, features in various reservoir types, deep burial, and wide range of crude oil viscosity. For many years, a series of technologies have been developed for different oil products and reservoir types of the oilfield, of which water flooding, foam slug drive, steam stimulation, steam drive,and SAGD are the main technologies. After continuous improvement, they have been further developed and played an important role in the development of heavy oil in the oilfield.

  14. Transaction Costs, Information Technology and Development

    OpenAIRE

    Singh, Nirvikar

    2004-01-01

    This paper explores potential channels through which information technology (IT) affects economic development. The channel emphasized here is the reduction of transaction costs through the use of information technology. We discuss the nature of transaction costs, their possible impacts on economic outcomes, and the impacts of IT on transaction costs. We provide a theoretical discussion of how a reduction in transaction costs may affect the number of intermediate goods that are produced, and i...

  15. Evaluation of the effects of coal grinding in terms of coal water slurry preparation

    Directory of Open Access Journals (Sweden)

    Robak Jolanta

    2016-01-01

    Full Text Available Coal Water Slurry (CWS is a specific form of solid fuel. It occurs in the form of finely ground coal particles and water. Depending on the use, the content of combustible matter is from 40 to 70% by weight. The attractiveness of the fuel is primarily its properties, i.e. liquid form, high energy efficiency (for water evaporation 4% energy is used – for CSW with 70% concentration of coal, decreased environmental impurities (lower NOx emission and reduced risk of explosion. The advantages of CWS fuels, the possibility of independence from petrochemical fuels, wide availability of coal and emphasis on the use of cleaner technologies are the driving force for development of slurry fuel technologies. The major parameters characterizing the fuel suspension are: solid phase concentration (share of coal in the slurry expressed as either weight or volume fraction of dry coal, time stability (resistance to delamination and separation of the dispersed phase from the continuous phase and viscosity, determining the flow of suspension. The mentioned parameters are dependent on the susceptibility of coal for production of aqueous suspensions (slurrability, conditioned by natural properties of coal, such as: coalification degree, petrographic composition and surface properties. They are also dependent on the slurry fuel preparation process: particle size, solid phase concentration, used additives (stabilizing and dispersion agents and modification of primary coal properties (ash removal, change of surface properties. Preparation of sustainable, high concentrated CWS fuel coal is promoted by the hydrophobic nature of the coal surface, characteristic for coals of higher coalification. A great technological problem is to obtain a highly concentrated coal slurry fuel from less coalified hydrophilic steam coals. The paper presents the results of lab scale research on the CWS prepared from Polish steam coal by wet grinding in mill drum and vibrating. The milling

  16. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  17. Development of technologies for utilizing geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

  18. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  19. Development of advanced neutron beam technology

    Energy Technology Data Exchange (ETDEWEB)

    Seong, B. S.; Lee, J. S.; Sim, C. M. (and others)

    2007-06-15

    The purpose of this work is to timely support the national science and technology policy through development of the advanced application techniques for neutron spectrometers, built in the previous project, in order to improve the neutron spectrometer techniques up to the world-class level in both quantity and quality and to reinforce industrial competitiveness. The importance of the research and development (R and D) is as follows: 1. Technological aspects - Development of a high value-added technology through performing the advanced R and D in the broad research areas from basic to applied science and from hard to soft condensed matter using neutron scattering technique. - Achievement of an important role in development of the new technology for the following industries aerospace, defense industry, atomic energy, hydrogen fuel cell etc. by the non-destructive inspection and analysis using neutron radiography. - Development of a system supporting the academic-industry users for the HANARO facility 2. Economical and Industrial Aspects - Essential technology in the industrial application of neutron spectrometer, in the basic and applied research of the diverse materials sciences, and in NT, BT, and IT areas - Broad impact on the economics and the domestic and international collaborative research by using the neutron instruments in the mega-scale research facility, HANARO, that is a unique source of neutron in Korea. 3. Social Aspects - Creating the scientific knowledge and contributing to the advanced industrial society through the neutron beam application - Improving quality of life and building a national consensus on the application of nuclear power by developing the RT fusion technology using the HANARO facility. - Widening the national research area and strengthening the national R and D capability by performing advanced R and D using the HANARO facility.

  20. Flourishing Technology Development for China's Petroleum Industry

    Institute of Scientific and Technical Information of China (English)

    Fu Chengde; Liu Bingyi

    1994-01-01

    @@ Glimpse of Science andTechnology With over 40 years of development history, a rather complete package system for petroleum research and development has formed. The system includes geological study, oil and gas exploration as well as petroleum machinery etc. There are 262research institutions in CNPC at three different levels (CNPCheadquarters, oilfields headquarters and subsidiaries of oilfields). About 42 021 personnel are directly involved in research and development.

  1. Making technological innovation work for sustainable development.

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

    2016-08-30

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

  2. Incorporating Geospatial Technology into Teacher Professional Development

    Science.gov (United States)

    Sproles, E. A.; Songer, L.

    2009-12-01

    The need for students to think spatially and use geospatial technologies is becoming more critical as these tools and concepts are increasingly incorporated into a broad range of occupations and academic disciplines. Geospatial Teaching Across the Curriculum (Geo-STAC) is a collaborative program that provides high school teachers with mentored professional development workshops in geospatial thought and technology. The seminars, led by community college faculty, give high school teachers the ability to incorporate geospatial technology into coursework across the curriculum — in Science, Technology, Engineering, and Math (STEM) and non-STEM disciplines. Students participating in the hands-on lessons gain experience in web-based and desktop Geographic Information Systems (GIS). The goals of the workshop are for teachers to: (1) understand the importance of geospatial thinking; (2) learn how to employ geospatial thinking in each discipline; (3) learn about geospatial technologies; (4) develop a Web-based GIS lesson; and, (5) implement a Web-based GIS lesson. Additionally, Geo-STAC works with high school students so that they: (1) understand the importance of geospatial technologies and careers in future job markets; (2) learn how to use Web-based GIS to solve problems; and, (3) visit the community college GIS lab and experience using desktop GIS. Geo-STAC actively disseminates this collaborative model to colleges to community colleges and high schools across the country.

  3. Trends in Wind Energy Technology Development

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Madsen, Peter Hauge; Tande, John O.;

    2011-01-01

    . The huge potential of wind, the rapid development of the technology and the impressive growth of the industry justify the perception that wind energy is changing its role to become the future backbone of a secure global energy supply. Between the mid-1980s, when the wind industry took off, and 2005 wind...... turbine technology has seen rapid development, leading to impressive increases in the size of turbines, with corresponding cost reductions. From 2005 to 2009 the industry’s focus seems to have been on increasing manufacturing capacity, meeting market demand and making wind turbines more reliable...

  4. Development of nuclear equipment qualification technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heon O; Kim, Wu Hyun; Kim, Jin Wuk; Kim, Jeong Hyun; Lee, Jeong Kyu; Kim, Yong Han; Jeong, Hang Keun [Korea Institute of Machinery and Materials, Taejon (Korea)

    1999-03-01

    In order to enhance testing and evaluation technologies, which is one of the main works of the Chanwon branch of KIMM(Korea Institute of Machinery and Materials), in addition to the present work scope of the testing and evaluation in the industrial facilities such as petroleum and chemical, plants, the qualification technologies of the equipments important to safety used in the key industrial facilities such as nuclear power plants should be localized: Equipments for testing and evaluation is to be set up and the related technologies must be developed. In the first year of this study, of vibration aging qualification technologies of equipments important to safety used in nuclear power plants have been performed. (author). 27 refs., 81 figs., 17 tabs.

  5. Wheel wear and surface/subsurface qualities when precision grinding optical materials

    Science.gov (United States)

    Tonnellier, X.; Shore, P.; Luo, X.; Morantz, P.; Baldwin, A.; Evans, R.; Walker, D.

    2006-06-01

    An ultra precision large optics grinder, which will provide a rapid and economic solution for grinding large off-axis aspherical and free-form optical components, has been developed at Cranfield University. This paper presents representative grinding experiments performed on another machine - a 5 axes Edgetek - in order to verify the proposed BoX(r) grinding cycle. The optical materials assessed included; Zerodur(r), SIC and ULE(r), all three being materials are candidates for extreme large telescope (ELT) mirror segments. Investigated removal rates ranged from 2mm 3/s to 200mm 3/s. The higher removal rate ensures that a 1 metre size optic could be ground in less than 10 hours. These experiments point out the effect of diamond grit size on the surface quality and wheel wear. The power and forces for each material type at differing removal rates are presented, together with subsurface damage.

  6. WinCE多线程在磨加工主动量仪控制系统中的应用%Application of WinCE Multithreading in Control System of Grinding Initiative Meter

    Institute of Scientific and Technical Information of China (English)

    任冠青; 张琳娜; 郑鹏

    2013-01-01

    For development of embedded grinding initiative Meter,this paper proposes an approach for control system based on WinCE 6.0 Multithreading mechanism.Using thread synchronization technology,the grinding initiative Meter can achieve data acquisition,processing,display in real time,and control grinding process automatically without affecting the front interface switching operation and parameter setting,it enhances real-time and display intuitive of the grinding initiative Meter,makes operation of adjusting and setting parameter more simple,improves the accuracy of measurement.Through the test,we find that various abilities of the grinding initiative Meter used this mechanism are improved,it will have a high cost performance and broad market prospects.%针对嵌入式磨加工主动量仪的开发,本文提出了一种基于WinCE 6.0多线程机制的控制系统实现方法.运用相应的线程同步技术实现了磨加工主动量仪实时地对数据进行采集、处理、显示,自动控制磨削进程,同时又不影响前台界面的切换和参数设定操作,增强了磨加工主动量仪的实时性和显示直观性,使参数设置调整操作更加方便,提高了测量精度.通过测试表明,采用该机制的磨加工主动量仪工作时各方面性能明显改善,性价比较高,市场前景广阔.

  7. Advanced technology development reducing CO2 emissions

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Sup

    2010-09-15

    Responding to Korean government policies on green growth and global energy/ environmental challenges, SK energy has been developing new technologies to reduce CO2 emissions by 1) CO2 capture and utilization, 2) efficiency improvement, and 3) Li-ion batteries. The paper introduces three advanced technologies developed by SK energy; GreenPol, ACO, and Li-ion battery. Contributing to company vision, a more energy and less CO2, the three technologies are characterized as follows. GreenPol utilizes CO2 as a feedstock for making polymer. Advanced Catalytic Olefin (ACO) reduces CO2 emission by 20% and increase olefin production by 17%. Li-ion Batteries for automotive industries improves CO2 emission.

  8. Technological Creation Fuels Oil Giant's Development

    Institute of Scientific and Technical Information of China (English)

    Mu Zongyan

    2006-01-01

    @@ Sinopec has focused itself on development, conversion and extension of core technologies and specialized technologies in the recent years to fuel its main business development. With the efforts for IPR protection, Sinopec has achieved a series of technological creation results,which lead to huge social and economic benefits. Sinopec has also seen a significant change in the total amount,structure and quality of its assets thanks to those creation results. The sales income of Sinopec, for the first time,topped 800 billion yuan in 2005 with the profits and taxes exceeding 100 billion yuan. With the core competitiveness boosted continually, Sinopec rose to No.31 in the ranking of Fortune Global Top 500.

  9. A Facile Solvent Free Synthesis of 3-arylidenechroman-4-ones Using Grinding Technique

    Directory of Open Access Journals (Sweden)

    Suresh Kumar

    2012-01-01

    Full Text Available An efficient method for the synthesis of 3-arylidenechroman-4-ones has been developed under solvent free conditions using grinding technique. Grinding of variously substituted chroman-4-ones with aromatic aldehydes in presence of anhydrous barium hydroxide at room temperature give 3-arylidenechroman-4-ones in high yield (75-92%. Products are obtained by just acidification of the reaction mixture in ice cold water. Reaction in solid state, with enhanced rate, high selectivity and manipulative simplicity are the attractive features of this environmentally benign protocol. The chroman-4-one derivatives required for the reaction have been obtained by polyphosphoric acid (PPA catalysed cyclisation of phenoxypropanoic acids under microwave irradiations.

  10. 球磨法微细化马铃薯淀粉工艺优化%Optimization of micronization technology for potato starch with a ball-grinding method

    Institute of Scientific and Technical Information of China (English)

    杨宏志; 刘凤亮

    2014-01-01

    Objective To investigate the influence of various conditions on the effect of micro-miniaturization of potato starch after food-grade potato starch was micronized with a ball-grinder. Methods With the par-ticle size of potato starch as experimental indexes, the quadratic orthogonal regression experiments were de-signed, and the regressive equations concerning the experimental indexes and experimental parameters were obtained for grinding process. According to the influence of experimental parameters on the particle size of potato starch, the order of parameters is, milling time>rotary speed>mass concentration. The most appropri-ate conditions for the process of micronization of potato starch were obtained according to the results of a series of grinding experiments carried out with ball-grinder. Results The conditions mentioned above were milling time 24 h, rotary speed 350 r/min and mass concentration 0.35 g/mL, respectively. Conclusion Quadratic regression orthogonal rotation combination test results showed that the main impact of the order of potato starch miniaturization process factors were: the milling time, ball speed and starch concentration; starch grain size under optimal conditions for 11.019μm, return model predicted deviation was 2.7%with a higher prediction accuracy.%目的:利用球磨设备对普通食用级马铃薯淀粉进行微细化加工,研究不同微细化条件对马铃薯淀粉微细化效果的影响。方法采用二次正交旋转回归试验对微细化工艺进行优化,通过得到的二次正交旋转回归方程,确定影响微细化结果的各因素的主次顺序依次为:球磨时间、球磨机转速、淀粉液浓度。结果经试验最后确定马铃薯淀粉微细化的最适宜条件为以无水乙醇为球磨介质,球磨时间24 h,球磨机转速350 r/min,淀粉液浓度0.35 g/mL。结论二次正交回归旋转组合试验结果表明,影响马铃薯淀粉微细化工艺的各因素的主次顺序依次为:球

  11. Technological Development in Carbon Sequestration at Petrobras

    Energy Technology Data Exchange (ETDEWEB)

    Castello Branco, R.; Vazquez Sebastian, G.; Murce, T.; Cunha, P.; Dino, R.; Sartori Santarosa, C.

    2007-07-01

    Petrobras defined, in its mission, the intention to act in a safe and profitable way, with social and environmental responsibility. In its vision, the company decided to be an oil and energy company, taking into account climate change mitigation. These changes were partially caused, without the company's knowledge, for many years, by the burning of fossil fuels. Among many technologies available for this mitigation, carbon sequestration is the one that, in a short space of time, can avoid the collapse of earth's climate. In order to meet this carbon sequestration challenge, there has been established, at CENPES, three strategies for its technological development: (i) establishment of a Systemic Project for Carbon Sequestration within the scope of the Environmental Technology Program - PROAMB; (ii) creation of a Group of Carbon Sequestration Technologies for Climate Change Mitigation - formation of team and qualification program, which includes the realization of the International Seminar on Carbon Sequestration and Climate Change at Petrobras in October 2006; and (iii) Implementation of the Technological Network of Technologies for Climate Change Mitigation. (auth)

  12. Curriculum Development and Alignment in Radiologic Technology.

    Science.gov (United States)

    Dowd, Steven B.

    Before developing a curriculum for radiologic technology, one must first attempt to define the term "curriculum." The term is not easy to define precisely, although it does imply the necessity of a master plan that outlines institutional philosophy and goals, course descriptions, description of competency-based evaluation, performance objectives,…

  13. Recommendations for Radiologic Technology Workforce Development.

    Science.gov (United States)

    Collins, Dale E.

    A literature review was conducted to establish criteria for the development and establishment of an associate degree program in radiologic technology in Alaska, where traditional education programs had been slow to respond to the current personnel shortage. The information was obtained from a variety of state, regional, and national organizations…

  14. Developing Pre-service Teachers' Technology Integration ...

    African Journals Online (AJOL)

    Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... Makerere Journal of Higher Education ... Thus, it emerged that there is a need to explore models situated in a more encompassing theoretical framework like ...

  15. Vaccine development using recombinant DNA technology

    Science.gov (United States)

    Vaccines induce an immune response in the host that subsequently recognizes infectious agents and helps fight off the disease; vaccines must do this without causing the disease. This paper reviews the development of recombinant DNA technologies as a means of providing new ways for attenuating diseas...

  16. Grinding and polishing instead of sectioning for the tissue samples with a graft: Implications for light and electron microscopy.

    Science.gov (United States)

    Mukhamadiyarov, Rinat A; Sevostyanova, Victoria V; Shishkova, Daria K; Nokhrin, Andrey V; Sidorova, Olga D; Kutikhin, Anton G

    2016-06-01

    A broad use of the graft replacement requires a detailed investigation of the host-graft interaction, including both histological examination and electron microscopy. A high quality sectioning of the host tissue with a graft seems to be complicated; in addition, it is difficult to examine the same tissue area by both of the mentioned microscopy techniques. To solve these problems, we developed a new technique of epoxy resin embedding with the further grinding, polishing, and staining. Graft-containing tissues prepared by grinding and polishing preserved their structure; however, sectioning frequently required the explantation of the graft and led to tissue disintegration. Moreover, stained samples prepared by grinding and polishing may then be assessed by both light microscopy and backscattered scanning electron microscopy. Therefore, grinding and polishing outperform sectioning when applied to the tissues with a graft.

  17. NASA Astrophysics Funds Strategic Technology Development

    Science.gov (United States)

    Seery, Bernard D.; Ganel, Opher; Pham, Bruce

    2016-01-01

    The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and

  18. Experimental Setup for Diamond Grinding Using Electrochemical InProcess Controlled Dressing (ECD of Grinding Wheel

    Directory of Open Access Journals (Sweden)

    M. A. Shavva

    2014-01-01

    Full Text Available The most effective method for finish machining of hard-metals and alloys is to use the diamond grinding wheels for grinding. An application of diamond wheels significantly increases the employee output, reduces costs, and raises manufacturing efficiency with achieving the high performance properties of treated surfaces.During grinding a working surface of diamond wheel wears out. It adversely affects the cutting capability of the diamond grains, and depending on the grinding conditions can occur through different mechanisms. Wear of diamond wheel causes distortion of its shape and reduces cutting properties. However, dressing of diamond wheels is a complicated and time-consuming operation in terms of manufacturing technique.Methods to make dressing of diamond grinding wheel have different types of classification. Classification of dressing methods by the type of energy used is as follows: mechanical, chemical, electrophysical, electromechanical, and electrochemical. All these methods have their advantages and disadvantages.Electrochemical method of dressing is the most productive and efficient. Electrochemical method comprises anode-mechanical dressing and electrochemical (electrolytic one. The paper presents the electrochemical in-process dressing (ECD and the electrolytic in-process dressing (ELID.The source of energy, grinding a wheel with metal bond, and an electrode are necessary for providing ELID. The ELID consists of several stages. The first stage is preliminary electrolytic dressing of diamond wheel. The electrolyte is placed into the gap between the wheel and electrode. The bond of the wheel is oxidized. An insulating layer is formed. It reduces an electrical conductivity of the wheel and controls consumption of diamond grains, as well as polishes the surface of the work piece. Further, the insulating layer is destroyed. The cycle of dressing begins anew.The ECD proceeds in the same way as ELID. However during the ECD-process there

  19. Uplifting developing communities through sustained technology transfer

    CSIR Research Space (South Africa)

    Mashiri, M

    2007-05-01

    Full Text Available feedback mechanisms to both the local Integrated Development Plan and the Provincial Growth and Development Strategy, was able to navigate potential conflict areas such as negotiating acceptable wage rates [below minimum wage] with the community... to mobilize and galvanize the community around the benefits of the project, as well as to explain and to iron out potential mine fields, such as the level of funding available, wage rate and payment policy, technology issues and project implementation...

  20. [Recent development of microfluidic diagnostic technologies].

    Science.gov (United States)

    Li, Haifang; Zhang, Qianyun; Lin, Jin-Ming

    2011-04-01

    Microfluidic devices exhibit a great promising development in clinical diagnosis and disease screening due to their advantages of precise controlling of fluid flow, requirement of miniamount sample, rapid reaction speed and convenient integration. In this paper, the improvements of microfluidic diagnostic technologies in recent years are reviewed. The applications and developments of on-chip disease marker detection, microfluidic cell selection and cell drug metabolism, and diagnostic micro-devices are discussed.

  1. Development of fuel and energy storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Development of fuel cell power plants is intended of high-efficiency power generation using such fuels with less air pollution as natural gas, methanol and coal gas. The closest to commercialization is phosphoric acid fuel cells, and the high in efficiency and rich in fuel diversity is molten carbonate fuel cells. The development is intended to cover a wide scope from solid electrolyte fuel cells to solid polymer electrolyte fuel cells. For new battery power storage systems, development is focused on discrete battery energy storage technologies of fixed type and mobile type (such as electric vehicles). The ceramic gas turbine technology development is purposed for improving thermal efficiency and reducing pollutants. Small-scale gas turbines for cogeneration will also be developed. Development of superconduction power application technologies is intended to serve for efficient and stable power supply by dealing with capacity increase and increase in power distribution distance due to increase in power demand. In the operations to improve the spread and general promotion systems for electric vehicles, load leveling is expected by utilizing and storing nighttime electric power. Descriptions are given also on economical city systems which utilize wide-area energy. 30 figs., 7 tabs.

  2. THE DEVELOPMENT OF FCC STRIPPING TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    ZHANGZhen-qian

    2003-01-01

    This article briefly describes the major patents domestic and the abroad,and the current situation and achievements of FCC stripping technology in China.The develping trend of FCC stripping technology is presented,including further developments of FCC stripper to improve unit performance,combination of the stripper and pre-stripper within disengager to from a complete high-efficiency FCC stripping system.In addition to high efficiency,simple structure and easiness of installation and maintenance for a new FCC stripper are all of consideration.

  3. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  4. Developments in transgenic technology: applications for medicine.

    Science.gov (United States)

    Hunter, Cheryl V; Tiley, Laurence S; Sang, Helen M

    2005-06-01

    Recent advances in the efficiency of transgenic technology have important implications for medicine. The production of therapeutic proteins from animal bioreactors is well established and the first products are close to market. The genetic modification of pigs to improve their suitability as organ donors for xenotransplantation has been initiated, but many challenges remain. The use of transgenesis, in combination with the method of RNA interference to knock down gene expression, has been proposed as a method for making animals resistant to viral diseases, which could reduce the likelihood of transmission to humans. Here, the latest developments in transgenic technology and their applications relevant to medicine and human health will be discussed.

  5. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  6. Continuation of Crosscutting Technology Development at Cast

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan

    2012-03-31

    This Final Technical Report describes progress made on the sub-projects awarded in the Cooperative Agreement DE-FC26-05NT42457: Continuation of Crosscutting Technology Development at Center for Advanced Separation Technologies (CAST). The final reports for each sub-project are attached in the appendix. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: a) Solid-solid separation b) Solid-liquid separation c) Chemical/Biological Extraction d) Modeling and Control, and e) Environmental Control.

  7. Advanced Gas Turbine (AGT) technology development project

    Science.gov (United States)

    1987-01-01

    This report is the final in a series of Technical Summary Reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorizrd under NASA Contract DEN3-167 and sponsored by the DOE. The project was administered by NASA-Lewis Research Center of Cleveland, Ohio. Plans and progress are summarized for the period October 1979 through June 1987. This program aims to provide the US automotive industry the high risk, long range technology necessary to produce gas turbine engines for automobiles that will reduce fuel consumption and reduce environmental impact. The intent is that this technology will reach the marketplace by the 1990s. The Garrett/Ford automotive AGT was designated AGT101. The AGT101 is a 74.5 kW (100 shp) engine, capable of speeds to 100,000 rpm, and operates at turbine inlet temperatures to 1370 C (2500 F) with a specific fuel consumption level of 0.18 kg/kW-hr (0.3 lbs/hp-hr) over most of the operating range. This final report summarizes the powertrain design, power section development and component/ceramic technology development.

  8. Development of safety analysis technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kwon, Y. M.; Suk, S. D. [and others

    2002-05-01

    In the present study, the KALIMER safety analysis has been made for the transients considered in the design concept, hypothetical core disruptive accident (HCDA), and containment performance with the establishment of the design basis. Such analyses have not been possible without the computer code improvement, and the experience attained during this research period must have greatly contributed to the achievement of the self reliance in the domestic technology establishment on the safety analysis areas of the conceptual design. The safety analysis codes have been improved to extend their applicable ranges for detailed conceptual design, and a basic computer code system has been established for HCDA analysis. A code-to-code comparison analysis has been performed as a part of code verification attempt, and the leading edge technology of JNC also has been brought for the technology upgrade. In addition, the research and development on the area of the database establishment has been made for the efficient and systematic project implementation of the conceptual design, through performances on the development of a project scheduling management, integration of the individually developed technology, establishment of the product database, and so on, taking into account coupling of the activities conducted in each specific area.

  9. Extravehicular Activity Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2011-01-01

    The goal of NASA s current EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be to reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA hardware life and limited availability of the Extravehicular Mobility Units (EMUs) will eventually become a critical issue. The current EMU has successfully served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability will be needed and the current architectures and technologies under development offer significant improvements over the current flight systems. In addition to ISS, potential mission applications include EVAs for missions to Near Earth Objects (NEO), Phobos, or future surface missions. Surface missions could include either exploration of the Moon or Mars. Providing an

  10. TECHNOLOGY DEVELOPMENT ON THE DUPIC SAFEGUARDS SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    H. KIM; H. CHA; ET AL

    2001-02-01

    A safeguards system has been developed since 1993 in the course of supporting a fuel cycle process to fabricate CANDU fuel with spent PWR fuel (known as Direct Use of PWR spent fuel In CANDU, DUPIC). The major safeguards technology involved here was to design and fabricate a neutron coincidence counting system for process accountability, and also an unattended continuous monitoring system in association with independent verification by the IAEA. This combined technology was to produce information of nuclear material content and to maintain knowledge of the continuity of nuclear material flow. In addition to hardware development, diagnosis software is being developed to assist data acquisition, data review, and data evaluation based on a neural network system on the IAEA C/S system.

  11. Space solar cell technology development - A perspective

    Science.gov (United States)

    Scott-Monck, J.

    1982-01-01

    The developmental history of photovoltaics is examined as a basis for predicting further advances to the year 2000. Transistor technology was the precursor of solar cell development. Terrestrial cells were modified for space through changes in geometry and size, as well as the use of Ag-Ti contacts and manufacture of a p-type base. The violet cell was produced for Comsat, and involved shallow junctions, new contacts, and an enhanced antireflection coating for better radiation tolerance. The driving force was the desire by private companies to reduce cost and weight for commercial satellite power supplies. Liquid phase epitaxial (LPE) GaAs cells are the latest advancement, having a 4 sq cm area and increased efficiency. GaAs cells are expected to be flight ready in the 1980s. Testing is still necessary to verify production techniques and the resistance to electron and photon damage. Research will continue in CVD cell technology, new panel technology, and ultrathin Si cells.

  12. Recent developments in terahertz sensing technology

    Science.gov (United States)

    Shur, Michael

    2016-05-01

    Terahertz technology has found numerous applications for the detection of biological and chemical hazardous agents, medical diagnostics, detection of explosives, providing security in buildings, airports, and other public spaces, shortrange covert communications (in the THz and sub-THz windows), and applications in radio astronomy and space research. The expansion of these applications will depend on the development of efficient electronic terahertz sources and sensitive low-noise terahertz detectors. Schottky diode frequency multipliers have emerged as a viable THz source technology reaching a few THz. High speed three terminal electronic devices (FETs and HBTs) have entered the THz range (with cutoff frequencies and maximum frequencies of operation above 1 THz). A new approach called plasma wave electronics recently demonstrated an efficient terahertz detection in GaAs-based and GaN-based HEMTs and in Si MOS, SOI, FINFETs and in FET arrays. This progress in THz electronic technology has promise for a significant expansion of THz applications.

  13. Development of laser technology in Poland

    CERN Document Server

    Gajda, J

    2009-01-01

    The paper presents chosen development threads of laser technology and associated branches of optoelectronics in this country. An occasion to summarize the work and show their current status is the 50 th anniversary of construction of the first laser. The first laser in Poland was launched successfully in 1969, almost simultaneously at WAT and PW. Domestic achievements in this area are summarized every three years by Symposium on Laser Technology held traditionally in Swinoujscie. The work carried on in Poland concerns technology of laser materials, construction of new lasers and associated equipment as well as laser applications. Many technical teams participate in laser oriented European structural and framework projects. Ths is an invited paper to present participation of Polish teams in such European projects as EuCARD - European Coordination of Accelerator Research, FLASH - Free ELctron Laser in DESY Hamburg, E-XFEL - European X-Ray FEL, ELI - Extreme Light Infrastructure, and HIPER.

  14. A study on development of value added technology of pyrophyllite and dickite

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Keon-Joon; Choi, Yeon-Ho; Kim, Sang-Bae; Jeon, Ho-Seok; Cho, Sung-Baek [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1997-12-01

    Pyrophyllite and dickite have being utilized as refractories, ceramics, cement, fiber glass, paper, rubber, paints etc.. However, there are not any domestic companies to produce fillers of pyrophyllite and dickite for plastic and rubber. Moreover, several kinds of fillers are imported every year with expensive price for plastic and rubber filler. This study has purpose to develop manufacturing technologies to produce fillers for plastic and rubber of pyrophyllite and dickite. The chemical and mineralogical properties of samples, the optimum grinding condition and device for producing plastic fillers and development of technology of improvement in whiteness, and the optimum synthesis condition of zeolite Y are the scopes and contents of the study. Pyrophyllite samples are taken from Bunam. Principal composed minerals are pyrophyllite, quartz and dickite, having chemical components of 9.2% Al{sub 2}O{sub 3}, 74.8% SiO{sub 2}, and 0.1% Fe{sub 2}O{sub 3}, respectively. Dickite sample is taken from Bugok, consists of dickite and quartz having 37.7% Al{sub 2}O{sub 3}, 47.8% SiO{sub 2} and 0.04% Fe{sub 2}O{sub 3}. Efficiency of the vibrating mill proved to be greater than ball mill compare with median size. The whiteness of sample increased with roasting temperature. In grinding a Bunam and Bugok sample by vibrating mill for 180 minute, median particle size is 3.06{mu}m and 2.85{mu}m, respectively. The structure water dehydration temperature is about 600 deg.C and mullite is presented around 850 deg.C for dickite, and the whiteness increased with roasting temperature. The whiteness of Bunam and Bugok sample ground by vibrating mill for 180 minute and roasted for 60 minutes at 900 deg.C is 96.5, 98, respectively. The mole ratio of SiO{sub 2}/Al{sub 2}O{sub 3} is important factor for synthesis of zeolite Y, crystallinity is 56 at SiO{sub 2}/Al{sub 2}O{sub 3} mole ratio is 13. Reaction time also important factor, crystallinity is 52 at SiO{sub 2}/Al{sub 2}O{sub 3} mole ratio

  15. NASA GRC Stirling Technology Development Overview

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.

    2003-01-01

    The Department of Energy, Lockheed Martin (LM), Stirling Technology Company, and NASA Glenn Research Center (GRC) are developing a high-efficiency Stirling Radioisotope Generator (SRG) for potential NASA Space Science missions. The SRG is being developed for multimission use, including providing spacecraft onboard electric power for NASA deep space missions and power for unmanned Mars rovers. NASA GRC is conducting an in- house supporting technology project to assist in developing the Stirling convertor for space qualification and mission implementation. Preparations are underway for a thermalhacuum system demonstration and unattended operation during endurance testing of the 55-We Technology Demonstration Convertors. Heater head life assessment efforts continue, including verification of the heater head brazing and heat treatment schedules and evaluation of any potential regenerator oxidation. Long-term magnet aging tests are continuing to characterize any possible aging in the strength or demagnetization resistance of the permanent magnets used in the linear alternator. Testing of the magnet/lamination epoxy bond for performance and lifetime characteristics is now underway. These efforts are expected to provide key inputs as the system integrator, LM, begins system development of the SRG. GRC is also developing advanced technology for Stirling convertors. Cleveland State University (CSU) is progressing toward a multi-dimensional Stirling computational fluid dynamics code, capable of modeling complete convertors. Validation efforts at both CSU and the University of Minnesota are complementing the code development. New efforts have been started this year on a lightweight convertor, advanced controllers, high-temperature materials, and an end-to-end system dynamics model. Performance and mass improvement goals have been established for second- and third-generation Stirling radioisotope power systems.

  16. Separate critical condition for ultrasonic vibration assisted grinding

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Hong-li; ZHANG; Jian-hua

    2009-01-01

    Separate characteristic of the tangential ultrasonic vibration assisted grinding(TUAG)machining is analyzed based on TUAG process, and a critical speed formula is given to correctly set the machining parameters to insure the separate characteristics of TUAG process. The critical speed is not only related to the ultrasonic vibration amplitude and frequency, but also to the grinding wheel velocity and the cutting point space, and the grinding force can be decreased during the TUAG process with separability. Grinding force experiments are conducted, and the experimental results are in good agreement with the theoretical results.

  17. Thermo-mechanical properties of bowl-shaped grinding wheel and machining error compensation for grinding indexable inserts

    Institute of Scientific and Technical Information of China (English)

    张祥雷; 姚斌; 陈彬强; 孙维方; 王萌萌; 罗琪

    2015-01-01

    In order to meet the technical requirements of grinding the circumferential cutting edge of indexable inserts, thermo-mechanical properties of bowl-shaped grinding wheel in high speed grinding process and the influence of dimension variations of the grinding wheel on machining accuracy were investigated. Firstly, the variation trends of the dimension due to centrifugal force generated in different wheel speeds were studied and the effect of stress stiffening and spin softening was presented. Triangular heat flux distribution model was adopted to determine temperature distribution in grinding process. Temperature field cloud pictures were obtained by the finite element software. Then, dimension variation trends of wheel structure were acquired by considering the thermo-mechanical characteristic under combined action of centrifugal force and grinding heat at different speeds. A method of online dynamic monitoring and automatic compensation for dimension error of indexable insert was proposed. By experimental verification, the precision of the inserts satisfies the requirement of processing.

  18. 78 FR 17418 - Rural Health Information Technology Network Development Grant

    Science.gov (United States)

    2013-03-21

    ... award under the Rural Health Information Technology Network Development Grant (RHITND) to Grace... relinquishing its fiduciary responsibilities for the Rural Health Information Technology Network Development... HUMAN SERVICES Health Resources and Services Administration Rural Health Information Technology...

  19. Development of the advanced CANDU technology

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Min, Byung Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Na, Y. H.; Lee, S. Y.; Choi, J. H.; Lee, B. C.; Kim, S. N.; Jo, C. H.; Paik, J. S.; On, M. R.; Park, H. S.; Kim, S. R. [Korea Electric Power Co., Taejon (Korea, Republic of)

    1997-07-01

    The purpose of this study is to develop the advanced design technology to improve safety, operability and economy and to develop and advanced safety evaluation system. More realistic and reasonable methodology and modeling was employed to improve safety margin in containment analysis. Various efforts have been made to verify the CATHENA code which is the major safety analysis code for CANDU PHWR system. Fully computerized prototype ECCS was developed. The feasibility study and conceptual design of the distributed digital control system have been performed as well. The core characteristics of advanced fuel cycle, fuel management and power upgrade have been studied to determine the advanced core. (author). 77 refs., 51 tabs., 108 figs.

  20. 热管砂轮干磨削温度场数值模拟%Numerical simulation study on temperature field in dry grinding with heat pipe grinding wheel

    Institute of Scientific and Technical Information of China (English)

    梁星慧; 傅玉灿; 赫青山; 陈琛

    2012-01-01

    基于一种利用热管技术对磨削弧区进行强化换热的构想,采用FLUENT软件建立了环形热管砂轮干磨削温度场的仿真模型,得到了热管换热能力与热流密度、转速和砂轮壁厚的关系,并在相同热流密度下对比了热管砂轮与热管砂轮弧区的温度.仿真结果表明:弧区温度会随着热流密度的增大相应升高,随着转速的增大而降低,热管的启动时间会随着砂轮壁厚的增大减慢;相同热流密度下,热管砂轮的弧区温度明显低于无热管砂轮.最后通过干磨削钛合金TC4试验,对仿真结果进行了验证.%Based on the heat pipe technology to exchange heat, the heat transfer model of heat pipe grinding wheel (HPGW) using Fluent software was established. The influence of heat flux, thickness and rotation speed on the heat exchange capability in grinding zone with HPGW was analyzed in dry grinding process. The grinding temperature of HPGW was also compared with the grinding wheel without heat pipe in the same heat flux. The results showed that the grinding temperature of HPGW went up with the rising heat flux, decreased with the rising rotation speed, and the start lime of heat pipe got longer when the thickness increased. Furthermore, the grinding temperature of HPGW was much lower than the grinding wheel without heat pipe. In the end, the HPGW and the grinding wheel without heat pipe were respectively used lo conduct dry grinding. The experiment results proved the simulation results.

  1. The development of bioenergy technology in China

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C.Z.; Yin, X.L.; Yuan, Z.H.; Zhou, Z.Q.; Zhuang, X.S. [The Renewable Energy and Gas Hydrate Key Laboratory of CAS, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, 2 Nengyuan Road, Tianhe District, Guangzhou 510640 (China)

    2010-11-15

    Among renewable energy resources, bioenergy is one of the fastest growth energy alternatives with tremendous potential in China. The thermal, physical, and biological processes of conversion of biomass yield a number of products and can be obtained as gases, liquids, solid fuels, and electricity as well as a variety of chemicals. Various bioenergy technologies that have been developed are at the fundamental research, demonstration, and commercialization stages. This review concentrates on the processes that are attracting the most attention in China. This paper presents the important roles bioenergy plays in China. Firstly, the application status of bioenergy technologies are introduced, including biogas, fuel ethanol, biodiesel, and power generation at the commercialization stage. Then, the current research progresses are analyzed of ethanol derived from lignocellulose, sweet sorghum and cassava, biodiesel from jatropha, biomass briquetting, synthesized fuels and pyrolysis technologies at the fundamental research and demonstration stages. Finally, it is concluded that the key areas for developing bioenergy for the future are the exploitation of new biomass resources and R and D in biofuels from non-food biomass resources, as well as the development of commercialization methods suitable for developing countries. (author)

  2. Development of safety analysis technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Kwon, Y. M.; Suk, S. D. [and others

    2005-03-01

    The MATRA-LMR-FB has been developed internally for the damage prevention as well as the safety assessment during a channel blockage accident and, as a the result, the quality of the code becomes comparable to that developed in the leading countries. For a code-to-code comparison, KAERI could have access to the SASSYS-1 through a bilateral collaboration between KAERI and ANL. The study could bring into the reliability improvements both on the reactivity models in the SSC-K and on the SSC-K prediction capability. It finally leads to the completion of the SSC-K version 1.3 resulting from the qualitative and quantitative code-to-code comparison. The preliminary analysis for a metal fueled LMR could also become possible with the MELT-III and the VENUS-II, which had originally been developed for the HCDA analysis with an oxidized fuel, by developing the relevant models For the development of the safety evaluation technology, the safety limits have been set up, and the analyses of the internal and external channel blockages in an assembly have also been performed. Besides, the more reliable analysis results on the key design concepts could be obtained by way of the methodology improvement resulting from the qualitative and quantitative comparison study. For an efficient and systematic control of the main project, the integration of the developed technologies and the establishment of their data base have been pursued. It has gone through the development of the process control with taking account of interfaces among the sub-projects, the overall coordination of the developed technologies, the data base for the design products, and so on.

  3. Study of thread grinding based on the multi-body system theory%基于多体系统理论的螺纹磨削研究

    Institute of Scientific and Technical Information of China (English)

    范晋伟; 金爱韦; 宁堃; 梅钦; 李海涌

    2012-01-01

    将多体系统运动建模方法应用到数控螺纹磨床建模中,建立机床、工件和砂轮的运动关系,推导出多线砂轮磨削螺纹的加工方程.开发螺纹磨削仿真软件,获得螺纹磨削加工G代码,在磨削螺纹的生产中取得了很好的效果.%Applying the multi-body system modeling theory to CNC thread grinder modeling. Deriving multi-line grinding wheel thread processing equation based on movement relationship of machine tool, workpiece and grinding wheel. A thread grinding simulation software is developed, and the generating thread grinding G-code achieves good results in the production of thread grinding.

  4. Quenching simulation of steel grinding balls

    Energy Technology Data Exchange (ETDEWEB)

    Zapata-Hernandez, O.; Reyes, L. A.; Camurri, C.; Carrasco, C.; Garza-Monte-de-Oca, F.; Colas, R.

    2015-07-01

    The phase transformations of high carbon steel during quenching and equalizing were modelled using commercial computer packages based on the finite element method and the kinetic transformation of steel. The model was used to predict the temperature and microstructural changes taking place within balls of two different sizes that are used for grinding mineral ores. A good correlation between the temperatures measured by inserted thermocouples and those predicted by the model was obtained after modifying the thermal conductivity of the steel within the temperature domain at which mixed phases are present. The phase transformations predicted were confirmed by metallographic analyses. (Author)

  5. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of developi

  6. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of

  7. Technology Development for High Efficiency Optical Communications

    Science.gov (United States)

    Farr, William H.

    2012-01-01

    Deep space optical communications is a significantly more challenging operational domain than near Earth space optical communications, primarily due to effects resulting from the vastly increased range between transmitter and receiver. The NASA Game Changing Development Program Deep Space Optical Communications Project is developing four key technologies for the implementation of a high efficiency telecommunications system that will enable greater than 10X the data rate of a state-of-the-art deep space RF system (Ka-band) for similar transceiver mass and power burden on the spacecraft. These technologies are a low mass spacecraft disturbance isolation assembly, a flight qualified photon counting detector array, a high efficiency flight laser amplifier and a high efficiency photon counting detector array for the ground-based receiver.

  8. Development of decontamination, decommissioning and environmental restoration technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Jik; Kwon, H. S.; Kim, G. N. and others

    1999-03-01

    Through the project of 'Development of decontamination, decommissioning and environmental restoration technology', the followings were studied. 1. Development of decontamination and repair technology for nuclear fuel cycle facilities 2. Development of dismantling technology 3. Development of environmental restoration technology. (author)

  9. Technology and knowledge transfer for development

    CSIR Research Space (South Africa)

    Chakwizira, J

    2008-01-01

    Full Text Available . An indicative list of recommendations to turnaround the knowledge and technology transfer condition of Africa into a more resounding success than currently existing is indicated. A brief conclusion that includes critical percepts and thoughts on the future... growth and development. "Knowledge Management caters to the critical issues of organizational adaption, survival and competence in face of increasingly discontinuous environmental change. Essentially, it embodies organizational processes that seek...

  10. Freeform surface grinding and polishing by CCOS based on industrial robot

    Science.gov (United States)

    Liu, HaiTao; Wan, YongJian; Zeng, ZhiGe; Xu, LiChao; Zhao, HongShen; Fang, Kai

    2016-10-01

    The grinding and polishing of freeform surface by using Computer Controlled Optical Surfacing (CCOS) technology are discussed. Instead of using Computer Numeric Control (CNC) machine, a 6-axises industrial robot TX200 from Stäubli Co. Ltd. is used as the motion platform. In order to perform the movement that CCOS technology needs, the coordinate system of the robot in processing is reviewed and the offline programming method for robot is presented. The material removal experiments during grinding and polishing process on the robotic CCOS platform are been carried out. A rectangular toroid surface workpiece and a circular off-axis parabolic surface workpiece are being fabricated on the robotic CCOS platform, and the latest results will be discussed here.

  11. EXCEDE Technology Development III: First Vacuum Tests

    CERN Document Server

    Belikov, Ruslan; Pluzhnik, Eugene; Hix, Troy T; Bendek, Eduardo; Thomas, Sandrine J; Lynch, Dana H; Mihara, Roger; Irwin, J Wes; Duncan, Alan L; Greene, Thomas P; Guyon, Olivier; Kendrick, Richard L; Smith, Eric H; Witteborn, Fred C; Schneider, Glenn

    2014-01-01

    This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and beyond. This will allow it to directly detect and spatially resolve low surface brightness circumstellar debris disks as well as image giant planets as close as in the habitable zones of their host stars. In addition to doing fundamental science on debris disks, EXCEDE will also serve as a technological and scientific precursor for any future exo-Earth imaging mission. EXCEDE uses a Starlight Suppression System (SSS) based on the PIAA coronagraph, enabling aggressive performance. We report on our continuing progress of developing the SSS for EXCEDE, and in particular (a) the reconfiguration of our system into a more fli...

  12. Web Development Technology-PHP. How It Is Related To Web Development Technology ASP.NET

    Directory of Open Access Journals (Sweden)

    Manya Sharma

    2015-01-01

    Full Text Available ABSTRACT This paper tells about the technologies used in PHP and how they are related to ASP.NET. The paper begin with the introduction of PHP defining what and how technologies has been used in development of User Complaint Web Application. How thistechnology is related to ASP.NET in features such as implementation functionality validation and proactive behavior involved in validating user input from the browser providing users feedback overall time consumed in development and maintenance.

  13. Medically relevant ElectroNeedle technology development.

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Carrie Frances; Thomas, Michael Loren; McClain, Jaime L.; Harper, Jason C.; Achyuthan, Komandoor E.; Ten Eyck, Gregory A.

    2008-11-01

    ElectroNeedles technology was developed as part of an earlier Grand Challenge effort on Bio-Micro Fuel Cell project. During this earlier work, the fabrication of the ElectroNeedles was accomplished along with proof-of-concept work on several electrochemically active analytes such as glucose, quinone and ferricyanide. Additionally, earlier work demonstrated technology potential in the field of immunosensors by specifically detecting Troponin, a cardiac biomarker. The current work focused upon fabrication process reproducibility of the ElectroNeedles and then using the devices to sensitively detect p-cresol, a biomarker for kidney failure or nephrotoxicity. Valuable lessons were learned regarding fabrication assurance and quality. The detection of p-cresol was accomplished by electrochemistry as well as using fluorescence to benchmark ElectroNeedles performance. Results from these studies will serve as a guide for the future fabrication processes involving ElectroNeedles as well as provide the groundwork necessary to expand technology applications. One paper has been accepted for publication acknowledging LDRD funding (K. E. Achyuthan et al, Comb. Chem. & HTS, 2008). We are exploring the scope for a second paper describing the applications potential of this technology.

  14. Game development and simulation with unreal technology

    CERN Document Server

    Tavakkoli, Alireza

    2015-01-01

    Game Development and Simulation with Unreal Technology explores the use of Unreal Engine 4 (UE4) for the development of real-time digital interactive contents to be used in computerized games or simulations. The engine is considered in three main iterations: from the basic use of the engine to build games and simulation content out of the box, to intermediate design of interactive content by building on the pre-supplied contents from the base engine, and through advanced implementations geared toward a comprehensive understanding of the power of the Unreal Engine. This is one of the first book

  15. Development of Fundamental Technologies for Micro Bioreactors

    Science.gov (United States)

    Sato, Kiichi; Kitamori, Takehiko

    This chapter reviews the development of fundamental technologies required for microchip-based bioreactors utilizing living mammalian cells and pressure driven flow. The most important factor in the bioreactor is the cell culture. For proper cell culturing, continuous medium supply from a microfluidic channel and appropriate modification of the channel surface to accommodate cell attachment is required. Moreover, the medium flow rate should be chosen carefully, because shear stress affects cell activity. The techniques presented here could be applied to the development of micro bioreactors such as microlivers, pigment production by plant cells, and artificial insemination.

  16. Tracing Impacts of Science and Technology Development

    Science.gov (United States)

    Powell, Jeanne

    2003-03-01

    ATP's Mission and Operations. The ATP partners with industry to accelerate the development of innovative technologies for broad national economic benefit. The program's focus is on co-funding collaborative, multi-disciplinary technologies and enabling technology platforms that appear likely to be commercialized, with private sector funding, once the high technical risks are reduced. Industry-led projects are selected for funding in rigorous competitions on the basis of technical and economic merit. Since 1990, ATP has co-funded 642 projects, with 1,329 participants and another 1,300 subcontractors. Measuring to Mission: Overview of ATP's Evaluation Program. ATP's multi-component evaluation strategy provides measures of progress and performance matched to the stage of project evolution; i.e., for the short-term, from the time of project selection and over the course of the R for the mid-term, as commercial applications are pursued, early products reach the market, and dissemination of knowledge created in the R projects occurs; and for the longer-term, as more fully-developed technologies diffuse across multiple products and industries. The approach is applicable to all public S programs and adaptable to private or university projects ranging from basic research to applied industrial R. Examples of Results. ATP's composite performance rating system assesses ATP's completed projects against multi-faceted performance criteria of Knowledge Creation and Dissemination and Commercialization Progress 2-3 years after the end of ATP-funded R. It generates scores ranging from zero to four stars. Results for ATP's first 50 completed projects show that 16are in the bottom group of zero or one stars. 60the middle group. It is understood that not all ATP projects will be successful given the program's emphasis on funding high-risk technology development that the private sector is unwilling and unable to fund alone. Different technologies have different timelines for

  17. Industrialized Development Models of Agricultural Scientific and Technological Achievements

    Institute of Scientific and Technical Information of China (English)

    Wanjiang; WANG

    2015-01-01

    Industrialization of agricultural scientific and technological achievements has become an extremely important part in agricultural structural adjustment and agricultural economic development. Basic models for industrialization of China’s agricultural scientific and technological achievements should be:( i) integrating scientific and technological development and production relying on large enterprises;( ii) integrating scientific research and development with agricultural scientific and technological achievements and scientific research institutions as support;( iii) spindle type transformation;( vi) agricultural scientific and technological demonstration area;( v) technology extension network.

  18. NASA Solar Sail Propulsion Technology Development

    Science.gov (United States)

    Johnson, Les; Montgomery, Edward E.; Young, Roy; Adams, Charles

    2007-01-01

    NASA's In-Space Propulsion Technology Program has developed the first generation of solar sail propulsion systems sufficient to accomplish inner solar system science and exploration missions. These first generation solar sails, when operational, will range in size from 40 meters to well over 100 meters in diameter and have an areal density of less than 13 grams per square meter. A rigorous, multi-year technology development effort culminated in 2005 with the testing of two different 20-m solar sail systems under thermal vacuum conditions. The first system, developed by ATK Space Systems of Goleta, California, uses rigid booms to deploy and stabilize the sail. In the second approach, L'Garde, Inc. of Tustin, California uses inflatable booms that rigidize in the coldness of space to accomplish sail deployment. This effort provided a number of significant insights into the optimal design and expected performance of solar sails as well as an understanding of the methods and costs of building and using them. In a separate effort, solar sail orbital analysis tools for mission design were developed and tested. Laboratory simulations of the effects of long-term space radiation exposure were also conducted on two candidate solar sail materials. Detailed radiation and charging environments were defined for mission trajectories outside the protection of the earth's magnetosphere, in the solar wind environment. These were used in other analytical tools to prove the adequacy of sail design features for accommodating the harsh space environment. Preceding and in conjunction with these technology efforts, NASA sponsored several mission application studies for solar sails. Potential missions include those that would be flown in the near term to study the sun and be used in space weather prediction to one that would use an evolved sail capability to support humanity's first mission into nearby interstellar space. This paper will describe the status of solar sail propulsion within

  19. Developments in distributed optical fiber detection technology

    Science.gov (United States)

    Ye, Wei; Zhu, Qianxia; You, Tianrong

    2014-12-01

    The distributed optical fiber detection technology plays an important role in many fields, such as key regional security monitoring, pipeline maintenance and communication cable protection. It is superior to the traditional detector, and has a good prospect. This paper presents an overview of various distributed optical fiber sensors. At first, some related technologies of the optical fiber detection schemes are introduced in respect of sensing distance, real-time ability, signal strength, and system complexity; and the advantages and limitations of fiber gratings sensors, reflection-based optical fiber sensors, and interference- based optical fiber sensors are discussed. Then some advanced distributed optical fiber detection systems are mentioned. And the double-loop Sagnac distributed system is improved by adding photoelectric modulators and depolarizers. In order to denoise and enhance the original signal, a spectral subtraction-likelihood ratio method is improved. The experiment results show the spatial resolution is +/-15m per kilometer. Finally, based on the development trends of optical fiber detection technology at home and abroad, development tendency and application fields are predicted.

  20. Environmental technology development through industry partnership

    Energy Technology Data Exchange (ETDEWEB)

    Sebastion, R.L.

    1995-12-31

    The Coherent Laser Vision System (CLVS) is being developed to provide precision real-time 3D world views to support site characterization and robotic operations and during facilities Decontamination and Decommissioning. Autonomous or semiautonomous robotic operations requires an accurate, up-to-date 3D world view. Existing technologies for real-time 3D imaging, such as AM laser radar, have limited accuracy at significant ranges and have variability in range estimates caused by lighting or surface shading. Recent advances in fiber optic component technology and digital processing components have enabled the development of a new 3D vision system based upon a fiber optic FMCW coherent laser radar. The approach includes a compact scanner with no-moving parts capable of randomly addressing all pixels. The system maintains the immunity to lighting and surface shading conditions which is characteristic to coherent laser radar. The random pixel addressability allows concentration of scanning and processing on the active areas of a scene, as is done by the human eye-brain system. The precision measurement capability of the coherent laser radar (CLR) technology has already been demonstrated in the form of the CLR 3D Mapper, of which several copies have been delivered or are under order. The CLVS system, in contrast to the CLR 3D Mapper, will have substantially greater imaging speed with a compact no-moving parts scanner, more suitable for real-time robotic operations.

  1. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  2. Determining the optimum process parameter for grinding operations using robust process

    Energy Technology Data Exchange (ETDEWEB)

    Neseli, Suley Man; Asilturk, Ilhan; Celik, Levent [Univ. of Selcuk, Konya (Turkmenistan)

    2012-11-15

    We applied combined response surface methodology (RSM) and Taguchi methodology (TM) to determine optimum parameters for minimum surface roughness (Ra) and vibration (Vb) in external cylindrical grinding. First, an experiment was conducted in a CNC cylindrical grinding machine. The TM using L{sup 27} orthogonal array was applied to the design of the experiment. The three input parameters were workpiece revolution, feed rate and depth of cut; the outputs were vibrations and surface roughness. Second, to minimize wheel vibration and surface roughness, two optimized models were developed using computer aided single objective optimization. The experimental and statistical results revealed that the most significant grinding parameter for surface roughness and vibration is workpiece revolution followed by the depth of cut. The predicted values and measured values were fairly close, which indicates 2 ( 94.99 R{sup 2Ra}=and 2 92.73) R{sup 2Vb}=that the developed models can be effectively used to predict surface roughness and vibration in the grinding. The established model for determination of optimal operating conditions shows that a hybrid approach can lead to success of a robust process.

  3. STIMULATION OF PROCESS OF MUNERAL POWDER GRINDING THROUGH INTRODUCTION OF ADMIXTURES

    Directory of Open Access Journals (Sweden)

    Tarasov Roman Viktorovich

    2012-10-01

    Full Text Available The status of nanotechnologies in material science predetermines development of nanotechnology-intensive products that demonstrate pre-set properties of modified materials. The presence of nano-size particles of substances makes it possible to benefit from their physical and chemical potential and to overcome some negative developments that accompany the structure formation process (at interphase boundaries. The barrier properties are variable, which is quite important in terms of the increase of the asphalt concrete durability. Production of a modifier (that has nano-particles of the pre-set chemical composition to be added into asphalt concrete mixes is also of interest. The authors present their findings concerning the nano-scale modifier that has a chemically inert component and a hydraulically active substance. The method of de-aggregation is used to produce the nano-scale modifier. By-products are often welcomed as mineral components of the asphalt concrete, as they reduce its cost. The findings of the authors concerning the influence of the grinding mode on the integrated characteristics of the powder are presented in the paper. It is proven than dependence of integrated dispersion indicators is nonlinear due to processes leading to aggregation of mineral powder particles. The analysis of the experimental data collected in the course of "wet" grinding proves that surface-active substances stimulate the process of grinding. The type and concentration of an additive that improves the grinding efficiency is also identified.

  4. Ultra-precision ductile grinding of BK7 using super abrasive diamond wheel

    Institute of Scientific and Technical Information of China (English)

    ZHAO Qingliang; Brinksmeier Ekkard; Riemer Oltmann; Rickens Kai

    2007-01-01

    In this paper,a novel conditioning technique using copper bonded diamond grinding wheels of 91 μm grain size and electrolytic in-process dressing (ELID) is first developed to precisely and effectively condition a nickelelectroplated monolayer coarse-grained diamond grinding wheel of 151 μm grain size.Under optimised conditioning parameters,the super abrasive diamond wheel was well conditioned in terms of a minimized run-out error and flattened diamond grain surfaces of constant peripheral envelope.The conditioning force was monitored by a force transducer,while the modified wheel surface status was in-situ monitored by a coaxial optical distance measurement system.Finally,the grinding experiment on BK7 was conducted using the well-conditioned wheel with the corresponding surface morphology and subsurface damage measured by atomic force microscope (AFM) and scanning electric microscope (SEM),respectively.The experimental result shows that the newly developed conditioning technique is applicable and feasible to ductile grinding optical glass featuring nano scale surface roughness,indicating the potential of super abrasive diamond wheels in ductile machining brittle materials.

  5. Development of Solid State Laser Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Byung Heon; Kwon, Seong Ok; Kim, Yong Ki (and others)

    2007-04-15

    Recently, diode-pumped solid state lasers(DPSSL) have been developed to have a diffraction limited beam quality and high average output powers beyond kW. The lifetime extends to have several thousand hours. Due to such merits, the DPSSLs are now replacing previous application fields of CO{sub 2} laser, lamp-pumped solid-state lasers, Excimer laser, etc. The DPSSLs have broad application fields, such as laser spectroscopy and analysis, laser micromachining, precision measurement, laser range findings, laser pump sources, medical lasers, etc. In this project, various DPSSLs are developed for use in laser isotope production. Many new laser modules are designed and used to develop high power pulsed IR lasers and green lasers. In addition, a quasi CW driven compact DPSSL is developed to have high pulse energy DPSSL technologies.

  6. Review: DNA microarray technology and drug development

    Directory of Open Access Journals (Sweden)

    Sana Khan

    2010-01-01

    Full Text Available On the contrary to slow and non specific traditional drug discovery methods, DNA microarray technology could accelerate the identification of potential drugs for treating diseases like cancer, AIDS and provide fruitful results in the drug discovery. The technique provides efficient automation and maximum flexibility to the researchers and can test thousand compounds at a time. Scientists find DNA microarray useful in disease diagnosis, monitoring desired and adverse outcomes of therapeutic interventions, as well as, in the selection, assessment and quality con-trol of the potential drugs. In the current scenario, where new pathogens are expected every year, DNA microarray promises as an efficient technology to detect new organisms in a short time. Classification of carcinomas at the molecular level and prediction of how various types of tumor respond to different therapeutic agents can be made possible with the use of microarray analysis. Also, microarray technique can prove instrumental in personalized medicines development by providing microarray data of a patient which could be used for identifying diseases, treatment specific to individual and trailing disease prognosis. Microarray analysis could be beneficial in the area of molecular medicines for analysis of genetic variations and functions of genes in normal individuals and diseased conditions. The technique can give satisfactory results in single nucleotide polymorphism (SNP analysis and pharmacogenomics studies. The challenges that arise with the technology are high degree of variability with data obtained, frequent up gradation of methods and machines and lack of trained manpower. Despite this, DNA micro-array promises to be the next generation sequencer which could explain how organisms evolve and adapt looking at the whole genome. In a nutshell, Microarray technology makes it possible for molecular biologists to analyze simultaneously thousands of DNA samples and monitor their

  7. Study on cermet CBN grinding wheels for ultra-precision grinding%一种新型超精磨金属陶瓷CBN砂轮的研究

    Institute of Scientific and Technical Information of China (English)

    陈卫东; 韩云

    2012-01-01

    通过考察不同因素对砂轮锋利性、寿命及加工工件表面粗糙度的影响,优选出了端面超精磨CBN砂轮的制备工艺.通过对比实验,得出最优配比如下:CBN磨料的粒径优选添加40 μm,陶瓷空心球的粒度优选添加240目,其添加量优选体积分数为20%,金属粉的优选体积分数为9%.该配方制备的CBN砂轮的锋利性、寿命及加工工件的表面粗糙度均达到了较好的效果.%By studying main influence factors on wheel sharpness, lifetime and machined surface roughness of workpieces, optimum manufacturing technology of cermet CBN grinding wheel for end ultra-precision grinding was researched. After a series of comparative experiments, optimized manufacturing parameters were obtained as follows; particle size of CBN grits 40 μm; hollow ceramic sphere size 240 meshes with addition amount 20% (volume fraction) ; and volume fraction of metal powder 9%. CBN grinding wheels prepared according to the formula above showed better properties, such as sharpness, lifespan and surface roughness of machined workpieces.

  8. Occlusal Grinding Pattern during Sleep Bruxism and Temporomandibular Disorder

    Directory of Open Access Journals (Sweden)

    Yeni Wijaya

    2013-09-01

    Full Text Available Sleep Bruxism is a significant etiology of temporomandibular disorder (TMD and causes many dental or oral problems such as tooth wear or facet. There is no study analyzing the relationship between sleep bruxism and TMD. Objective: To investigate any relationship between occlusal grinding pattern during sleep bruxism and temporomandibular disorder. Methods: A cross-sectional study involving 30 sleep bruxism patients attended the Faculty Dentistry Universitas Indonesia Teaching Hospital (RSGMP FKG UI. Completion of 2 forms of ID-TMD index and questionnaire from American Academy of Sleep Medicine were done. BruxChecker was fabricated and used for two nights to record the occlusal grinding pattern. The occlusal grinding pattern was categorized into laterotrusive grinding (LG and mediotrusive side. Further divisons of LG were: incisor-canine (IC, incisor-caninepremolar (ICP and incisor-canine-premolar-molar (ICPM. Mediotrusive side was classified as mediotrusive contact (MC and mediotrusive grinding (MG. Results: It was found that occlusal grinding pattern in non-TMD subjects were IC+MC, in subjects with mild TMD were ICP+MG and in subjects with moderate TMD were ICP+MG and ICPM+MG. TMJ was more significantly affected by ICP and ICPM grinding pattern than that of IC. Conclusion: There was a significant relationship between occlusal grinding pattern during sleep bruxism and TMD.DOI: 10.14693/jdi.v20i2.149

  9. 7 CFR 58.726 - Cutting and grinding.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Cutting and grinding. 58.726 Section 58.726 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.726 Cutting and grinding. The trimmed and cleaned cheese should be cut into sections...

  10. Stochastic dynamic programming applied to planning of robot grinding tasks

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.L. (Digital Equipment Corp., Shrewsbury, MA (United States)); Whitney, D.E. (Massachusetts Inst. of Technology, Cambridge, MA (United States))

    1994-10-01

    This paper proposes an intelligent manufacturing system that can make decisions about the process in light of the uncertain outcome of these decisions and attempts to minimize the expected economic penalty resulting from those decisions. It uses robot weld bead grinding as an example of a process with significant process variations. The need for multiple grinding passes, the poor predictability of those passes, the task requirements, and the process constraints conspire to make planning and controlling weld bead grinding a formidable probe. A three tier hierarchical control system is proposed to plan an optimal sequence of grinding passes, dynamically simulate each pass, execute the planned sequence of controlled grinding passes, and modify the pass sequence as grinding continues. The top tier, described in this paper, plans the grinding sequence for each weld bead, and is implemented using Stochastic Dynamic Programming, selecting the volumetric removal and feedspeed for each pass in order to optimize the satisfaction of the task requirements by the entire grinding sequence within the equipment, task, and process constraints. The resulting optimal policies have quite complex structures, showing foresight, anxiety, indifference, and aggressiveness, depending upon the situation.

  11. Development of Interconnect Technologies for Particle Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, Mani [Univ. of California, Davis, CA (United States)

    2015-01-29

    This final report covers the three years of this grant, for the funding period 9/1/2010 - 8/31/2013. The project consisted of generic detector R&D work at UC Davis, with an emphasis on developing interconnect technologies for applications in HEP. Much of the work is done at our Facility for Interconnect Technologies (FIT) at UC Davis. FIT was established using ARRA funds, with further studies supported by this grant. Besides generic R&D work at UC Davis, FIT is engaged in providing bump bonding help to several DOE supported detector R&D efforts. Some of the developmental work was also supported by funding from other sources: continuing CMS project funds and the Linear Collider R&D funds. The latter program is now terminated. The three year program saw a good deal of progress on several fronts, which are reported here.

  12. Hydraulic hammer drilling technology: Developments and capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Melamed, Y.; Kiselev, A. [SKB Geotechnika, Moscow (Russian Federation); Gelfgat, M. [Aquatic Co., Moscow (Russian Federation); Dreesen, D.; Blacic, J. [Los Alamos National Lab., NM (United States). GeoEngineering Group

    1996-12-31

    Percussion drilling technology was considered many years ago as one of the best approaches for hard rock drilling. Unfortunately the efficiency of most hydraulic hammer (HH) designs was very low (8% maximum), so they were successfully used in shallow boreholes only. Thirty years of research and field drilling experience with HH application in Former Soviet Union (FSU) countries led to the development of a new generation of HH designs with a proven efficiency of 40%. That advance achieved good operational results in hard rock at depths up to 2,000 m and more. The most recent research has shown that there are opportunities to increase HH efficiency up to 70%. This paper presents HH basic design principles and operational features. The advantages of HH technology for coiled-tubing drilling is shown on the basis of test results recently conducted in the US.

  13. Aluminate solution decomposition new technology development

    Energy Technology Data Exchange (ETDEWEB)

    Abramov, V.Ya.; Stelmakova, G.D. [Scientific Technical Centre Reactor, Moscow (Russian Federation)

    1996-10-01

    Scientific Technical Centre Reactor together with SC Aluminy carried out the number of investigations in the field of aluminum solution decomposition new technology development. It was based on large prime ratio on one hand, and liquid-solid countercurrent flow movement on the other hand. Practically the suggested technology was considered to be the result of unstationary, mass-transfer theory, which had been checked up at 100 m3 plot scale plant. Hydrate washing was accomplished at the first stage under the condition of countercurrent flow and less than 1 m3 water discharge. The experiments of 3.2--3.3 caustic module aluminate solution decomposition were carried out at the second stage. While full reactor 20 hour regime operation the caustic module increased till 4.1. Usually it accounts 3.7 under the analogous conditions and time.

  14. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Bryan, Tom; MacLeod, Todd; Gagliano, Larry

    2016-01-01

    On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

  15. Engineering research, development and technology FY99

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R T

    2000-02-01

    The growth of computer power and connectivity, together with advances in wireless sensing and communication technologies, is transforming the field of complex distributed systems. The ability to deploy large numbers of sensors with a rapid, broadband communication system will enable high-fidelity, near real-time monitoring of complex systems. These technological developments will provide unprecedented insight into the actual performance of engineered and natural environment systems, enable the evolution of many new types of engineered systems for monitoring and detection, and enhance our ability to perform improved and validated large-scale simulations of complex systems. One of the challenges facing engineering is to develop methodologies to exploit the emerging information technologies. Particularly important will be the ability to assimilate measured data into the simulation process in a way which is much more sophisticated than current, primarily ad hoc procedures. The reports contained in this section on the Center for Complex Distributed Systems describe activities related to the integrated engineering of large complex systems. The first three papers describe recent developments for each link of the integrated engineering process for large structural systems. These include (1) the development of model-based signal processing algorithms which will formalize the process of coupling measurements and simulation and provide a rigorous methodology for validation and update of computational models; (2) collaborative efforts with faculty at the University of California at Berkeley on the development of massive simulation models for the earth and large bridge structures; and (3) the development of wireless data acquisition systems which provide a practical means of monitoring large systems like the National Ignition Facility (NIF) optical support structures. These successful developments are coming to a confluence in the next year with applications to NIF structural

  16. Development of radioisotope preparation and application technology

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hyon Soo; Park, K. B.; Bang, H. S. [and others

    2000-04-01

    The purpose of this project is to develop RI production technology utility 'HANARO' and to construct a sound infra-structure for mass production and supply to domestic users. The developed contents and results are as follows: two types of rig for irradiation in reactor core were designed and manufactured. The safety of OR rig during irradiation was identified through various test and it is used for RI production. The prepared IR rig will be used to performance tests for safety. We prepared two welders and welding jigs for production of sealed sources, and equipments for quality control of the welded materials. Production processes and apparatus Cr-51, P-32, I-125 and Sr-89, were developed. Developed results would be used for routine production and supply of radioisotopes. The automatic Tc-99m extraction apparatus was supplied to Libya under IAEA support. For approval on special form radioactive material of the developed Ir-192 source assembly and projector documents were prepared and submitted to MOST. The high dose rate Ir-192 source(diameter 1.1 mm, length 5.2 mm) for RALS and the laser welding system for its fabrication were developed. Production technologies of Ir-192 sources for destructive test and medical therapy were transferred to private company for commercial supply. The chemical immobilization method based on the self-assemble monolayer of {omega}-functionalized thiol and the sensing scheme based on the beta-emitter labeling method were developed for the fabrication radioimmuno-sensors. Results of this study will be applied to mass production of radioisotopes 'HANARO' and are to contribute the advance of domestic medicine and industry related to radioisotopes.

  17. Advanced Technology Development for Stirling Convertors

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.

    2004-01-01

    A high-efficiency Stirling Radioisotope Generator (SRG) for use on potential NASA Space Science missions is being developed by the Department of Energy, Lockheed Martin, Stirling Technology Company, and NASA Glenn Research Center (GRC). These missions may include providing spacecraft onboard electric power for deep space missions or power for unmanned Mars rovers. GRC is also developing advanced technology for Stirling convertors, aimed at substantially improving the specific power and efficiency of the convertor and the overall power system. Performance and mass improvement goals have been established for second- and thirdgeneration Stirling radioisotope power systems. Multiple efforts are underway to achieve these goals, both in-house at GRC and under various grants and contracts. The status and results to date for these efforts will be discussed in this paper. Cleveland State University (CSU) is developing a multi-dimensional Stirling computational fluid dynamics code, capable of modeling complete convertors. A 2-D version of the code is now operational, and validation efforts at both CSU and the University of Minnesota are complementing the code development. A screening of advanced superalloy, refractory metal alloy, and ceramic materials has been completed, and materials have been selected for creep and joining characterization as part of developing a high-temperature heater head. A breadboard characterization is underway for an advanced controller using power electronics for active power factor control with a goal of eliminating the heavy tuning capacitors that are typically needed to achieve near unity power factors. Key Stirling developments just initiated under recent NRA (NASA Research Announcement) awards will also be discussed. These include a lightweight convertor to be developed by Sunpower Inc. and an advanced microfabricated regenerator to be done by CSU.

  18. Computer Simulation of Batch Grinding Process Based on Simulink 5.0

    Institute of Scientific and Technical Information of China (English)

    LI Xia; YANG Ying-jie; DENG Hui-yong; HUANG Guang-yao

    2005-01-01

    How to use Simulink software in grinding system was studied. The method of designing batch grinding subsystem and the steps of building batch grinding blockset were introduced. Based on batch grinding population balance model, batch grinding was simulated with Simulink. The results show that the simulation system designed with Simulink explain reasonably the impersonal rule of batch grinding. On the basis of batch grinding simulation, the computer simulation of mineral processing system with Simulink of grinding and classification, comminution, etc, can be properly explored.

  19. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2003-11-15

    The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (a) Solid-solid separation (b) Solid-liquid separation (c) Chemical/Biological Extraction (d) Modeling and Control, and (e) Environmental Control. Distribution of funds is being handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. The first of these solicitations, referred to as the CAST II-Round 1 RFP, was issued on October 28, 2002. Thirty-eight proposals were received by the December 10, 2002 deadline for this RFP-eleven (11) Solid-Solid Separation, seven (7) Solid-Liquid Separation, ten (10) Chemical/Biological Extraction, six (6) Modeling & Control and four (4) Environmental Control. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. This process took some 7 months to complete but 17 projects (one joint) were in place at the constituent universities (three at Virginia Tech, two at West Virginia University, three at University of

  20. Monitoring Grinding Wheel Redress-life Using Support Vector Machines

    Institute of Scientific and Technical Information of China (English)

    Xun Chen; Thitikorn Limchimchol

    2006-01-01

    Condition monitoring is a very important aspect in automated manufacturing processes. Any malfunction of a machining process will deteriorate production quality and efficiency. This paper presents an application of support vector machines in grinding process monitoring. The paper starts with an overview of grinding behaviour. Grinding force is analysed through a Short Time Fourier Transform (STFT) to identify features for condition monitoring. The Support Vector Machine (SVM) methodology is introduced as a powerful tool for the classification of different wheel wear situations.After training with available signal data, the SVM is able to identify the state of a grinding process. The requirement and strategy for using SVM for grinding process monitoring is discussed, while the result of the example illustrates how effective SVMs can be in determining wheel redress-life.

  1. Specific Properties of Air Flow Field Within the Grinding Zone

    Institute of Scientific and Technical Information of China (English)

    ZHENG Junyi; JIANG Zhengfeng; ZHAO Liang

    2006-01-01

    Air barrier of grinding means a boundary layer of air existing at the circumference of the rotating wheel, which hinders coolant from entry. This paper makes a research on air flow field of the grinding zone through experiments and numerical simulations, focusing on acquainting with the specific properties of the air flow field. Finite volume method is applied to analyze air flow field within grinding wheel in the course of numerical calculations. The test devices such as Hot-wire anemometer and Betz manometer are used during the experiments of testing the pressure and velocity within grinding zone. Results of experiments agree by and large with numerical results of calculations. The conclusions obtained in this paper, the distribution of wall pressure and the distribution of air flow velocity, are important and useful to navigate the delivery of coolant into the grinding zone. In conclusion, some recommendations are made for further study and practical applications in such field.

  2. Research on product size and grinding dynamics of vibration mills

    Institute of Scientific and Technical Information of China (English)

    YIN Zhong-jun; HAN Tian; CHEN Bing; ZHANG Wen-zhong

    2007-01-01

    In order to improve vibration mills grinding effect and increase productive efficiency, prime factors of vibration mills were gained much attention. The purpose of this study is to reveal product size distribution and grinding dynamics of vibration mills by orthogonal experi-ments. The metallurgical refractory materials were used as research object. In order to explore the relationships between grinding effect and primary factors, lots of milling experiments were carried out. Based on the results, the conclusions can be summarized: as time runs, the size distri-bution shows exponential trend, and range becomes more and more narrow. Also the quantitative analysis result between grinding effect and primary factors was obtained by non-linear regres-sion: high frequency, high amplitude and low fill ratio can increase grinding speed.

  3. Status of SOFCo SOFC technology development

    Energy Technology Data Exchange (ETDEWEB)

    Privette, R.; Perna, M.A.; Kneidel, K. [SOFCo, Alliance, OH (United States)] [and others

    1996-12-31

    SOFCo, a Babcock & Wilcox/Ceramatec Research & Development Limited Partnership, is a collaborative research and development venture to develop technologies related to planar, solid-oxide fuel cells (SOFCs). SOFCo has successfully demonstrated a kW-class, solid-oxide fuel cell module operating on pipeline natural gas. The SOFC system design integrates the air preheater and the fuel processor with the fuel cell stacks into a compact test unit; this is the platform for multi-kW modules. The cells, made of tape-cast zirconia electrolyte and conventional electrode materials, exhibit excel lent stability in single-cell tests approaching 40,000 hours of operation. Stack tests using 10-cm and 15-cm cells with ceramic interconnects also show good performance and stability in tests for many thousands of hours.

  4. Chemical sensors technology development planning workshop

    Energy Technology Data Exchange (ETDEWEB)

    Bastiaans, G.J.; Haas, W.J. Jr.; Junk, G.A. [eds.

    1993-03-01

    The workshop participants were asked to: (1) Assess the current capabilities of chemical sensor technologies for addressing US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) needs; (2) Estimate potential near term (one to two years) and intermediate term (three to five years) capabilities for addressing those needs; and (3) Generate a ranked list of specific recommendations on what research and development (R&D) should be funded to provide the necessary capabilities. The needs were described in terms of two pervasive EM problems, the in situ determination of chlorinated volatile organic compounds (VOCs), and selected metals in various matrices at DOE sites. The R&D recommendations were to be ranked according to the estimated likelihood that the product technology will be ready for application within the time frame it is needed and the estimated return on investment. The principal conclusions and recommendations of the workshop are as follows: Chemical sensors capable of in situ determinations can significantly reduce analytical costs; Chemical sensors have been developed for certain VOCs in gases and water but none are currently capable of in situ determination of VOCs in soils; The DOE need for in situ determination of metals in soils cannot be addressed with existing chemical sensors and the prospects for their availability in three to five years are uncertain; Adaptation, if necessary, and field application of laboratory analytical instruments and those few chemical sensors that are already in field testing is the best approach for the near term; The chemical sensor technology development plan should include balanced support for near- and intermediate-term efforts.

  5. Development of Advanced Ceramic Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pujari, V.K.

    2001-04-05

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration. A high-power diesel engine valve for the DDC Series 149 engine was chosen as the demonstration part for this program. This was determined to be an ideal component type to demonstrate cost-effective process enhancements, the beneficial impact of advanced ceramics on transportation systems, and near-term commercialization potential. The baseline valve material was NAC's NT451 SiAION. It was replaced, later in the program, by an alternate silicon nitride composition (NT551), which utilized a lower cost raw material and a simplified powder-processing approach. The material specifications were defined based on DDC's engine requirements, and the initial and final component design tasks were completed.

  6. Development of spent fuel remote handling technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, B. S.; Yoon, J. S.; Hong, H. D. (and others)

    2007-02-15

    In this research, the remote handling technology was developed for the ACP application. The ACP gives a possible solution to reduce the rapidly cumulative amount of spent fuels generated from the nuclear power plants in Korea. The remote technologies developed in this work are a slitting device, a voloxidizer, a modified telescopic servo manipulator and a digital mock-up. A slitting device was developed to declad the spent fuel rod-cuts and collect the spent fuel UO{sub 2} pellets. A voloxidizer was developed to convert the spent fuel UO{sub 2} pellets obtained from the slitting process in to U{sub 3}O{sub 8} powder. Experiments were performed to test the capabilities and remote operation of the developed slitting device and voloxidizer by using simulated rod-cuts and fuel in the ACP hot cell. A telescopic servo manipulator was redesigned and manufactured improving the structure of the prototype. This servo manipulator was installed in the ACP hot cell, and the target module for maintenance of the process equipment was selected. The optimal procedures for remote operation were made through the maintenance tests by using the servo manipulator. The ACP digital mockup in a virtual environment was established to secure a reliability and safety of remote operation and maintenance. The simulation for the remote operation and maintenance was implemented and the operability was analyzed. A digital mockup about the preliminary conceptual design of an enginnering-scale ACP was established, and an analysis about a scale of facility and remote handling was accomplished. The real-time diagnostic technique was developed to detect the possible fault accidents of the slitting device. An assessment of radiation effect for various sensors was also conducted in the radiation environment.

  7. Developments in rubber technology 2 synthetic rubbers

    CERN Document Server

    Lee, K

    1981-01-01

    This book is intended for those people who have a knowledge or understanding of rubber materials and processes but who wish to update their knowledge. It should be read in conjunction with Developments in Rubber Technology-l as that volume discussed developments in natural rubber and selected special purpose synthetic rubbers as well as additives. The authors have been selected for their expertise in each particular field and we, as editors, would like to express our appreciation to the individual authors and also to their companies. Such a book would be impossible to produce without such active cooperation as we have received. Volumes 1 and 2 of Developments in Rubber Technology cover rubbers which are processed and vulcanised in the traditional manner. It is appreciated that the omission of non-vulcanised rubber materials (the so­ called thermoplastic elastomers) will be unwelcome to many readers but it is intended, because of the size of the subject, to cover these materials in a subsequent volume. A.W. K...

  8. Alternative technological development for RF hybridization

    Science.gov (United States)

    Antônio Finardi, Célio; da Fontoura Ponchet, André; Battesini Adamo, Cristina; Flacker, Alexander; Cotrin Teixeira, Ricardo; Panepucci, Roberto Ricardo

    2017-03-01

    The paper presents a technological solution for high frequency packaging platform evaluated up to 40 GHz. The main purpose of this development was to define an alternative hybrid technology that is more flexible and faster to prototype compared with thin film or multi chip module (MCM-D). The alternative technology also shows adequate performance for high bit rate solutions integrating optical and electronics blocks. This approach consists of a soft substrate (laminate material), plating processes (electroless Ni-P/Au, electrolytic Au) and lithography patterning. Ground coplanar waveguide was used for microwave structures with excellent ground planes connections due to easy via holes implementation. We present results of high frequency packaging of important RF blocks, such as integrated broadband bias-T, transimpedance amplifier ICs and silicon photonics optical modulators. The paper demonstrates a solution for high frequency hybridization that can be implemented with standard substrates, designed with any shape and with large numbers of metalized via holes and compatible with usual assembling techniques.

  9. Wind Energy Workforce Development: Engineering, Science, & Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

    2013-03-29

    Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

  10. New technique for preparing cartilage for intracordal injection: the freezing and grinding method.

    Science.gov (United States)

    Park, Young Min; Lee, Won Yong; Lim, Yun-Sung; Lee, Jin-Choon; Lee, Byung-Joo; Wang, Soo-Geun

    2014-07-01

    We developed a technique for preparing harvested cartilage that creates finer, more uniform pieces by freezing with liquid nitrogen and grinding with a mortar and pestle. Herein, we report the application of this new technique for intracordal cartilage injection. Experimental study. Human cartilage was obtained from surgical cases. In the standard method, harvested cartilage was prepared with scissors and a knife. In the experimental group, harvested cartilage was frozen with liquid nitrogen and ground with a mortar and pestle. It took an average of 60 minutes to manipulate cartilage using the standard technique, whereas it took an average of 10 minutes using the freezing and grinding method (P<0.001). The average size of cartilage flakes generated by the standard and new techniques were 727 and 48.6 μm, respectively. The cartilage flakes produced using scissors and a knife were able to pass through a 19-gauge needle, whereas those created using the freezing and grinding method were able to pass through a 24-gauge needle. Using the freezing and grinding method, cartilage was broken into fine, uniform pieces that could pass through a 24-gauge needle. This new technique will facilitate the production of commercial cartilage material for intracordal injection. Copyright © 2014 The Voice Foundation. All rights reserved.

  11. Investigation on the potential of waste cooking oil as a grinding aid in Portland cement.

    Science.gov (United States)

    Li, Haoxin; Zhao, Jianfeng; Huang, Yuyan; Jiang, Zhengwu; Yang, Xiaojie; Yang, Zhenghong; Chen, Qing

    2016-12-15

    Although there are several methods for managing waste cooking oil (WCO), a significant result has not been achieved in China. A new method is required for safe WCO management that minimizes the environmental threat. In this context, this work was developed in which cement clinker and gypsum were interground with various WCOs, and their properties, such as grindability, water-cement ratio required to achieve a normal consistency, setting times, compressive strength, contents of calcium hydroxide and ettringite in the hardened paste, microstructure and economic and environmental considerations, were addressed in detail. The results show that, overall, WCO favorably improves cement grinding. WCO prolonged the cement setting times and resulted in longer setting times. Additionally, more remarkable effects were found in cements in which WCO contained more unsaturated fatty acid. WCOs increased the cement strength. However, this enhancement was rated with respect to the WCO contents and components. WCOs decreased the CH and AFt contents in the cement hardened paste. Even the AFt content at later ages was reduced when WCO was used. WCO also densify microstructure of the hardened cement paste. It is economically and environmentally feasible to use WCOs as grinding aids in the cement grinding process. These results contribute to the application of WCOs as grinding aids and to the safe management of WCO. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Development and application of genotyping technologies

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    With the completion of Human Genome Project,International HapMap Project and the publication of copy number variation in human genome,a great number of accurate,rapid,and cost-effective technologies for SNP analysis have been developed,promoting the research of the complex diseases.This article presents a review of widely used genotyping techniques,and the progress and prospect in the study of complex diseases in terms of the projects and achievements of Chinese National Human Genome Center at Shanghai(CHGCs).

  13. Guiding recombinant antivenom development by omics technologies

    DEFF Research Database (Denmark)

    Laustsen, Andreas Hougaard

    2017-01-01

    , endogenous animal proteins with toxin-neutralizing capabilities, and recombinant monoclonal antibodies. Harnessing either of these approaches, antivenom development may benefit from an in-depth understanding of venom compositions and the medical importance of individual venom toxins. Focus is thus also...... directed towards the different omics technologies (particularly venomics, antivenomics, and toxicovenomics) that are being used to uncover novel animal toxins, shed light on venom complexity, and provide directions for how to determine the medical relevance of individual toxins within whole venoms. Finally...

  14. Development and application of genotyping technologies

    Institute of Scientific and Technical Information of China (English)

    SHI JinXiu; WANG Ying; HUANG Wei

    2009-01-01

    With the completion of Human Genome Project, International HapMap Project and the publication of copy number variation in human genome, a great number of accurate, rapid, and cost-effective tech-nologies for SNP analysis have been developed, promoting the research of the complex diseases. This article presents a review of widely used genotyping techniques, and the progress and prospect in the study of complex diseases in terms of the projects and achievements of Chinese National Human Genome Center at Shanghai (CHGCs).

  15. Theorizing about technological development of manufacturing companies

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard

    2012-01-01

    The aim of the paper is to apply metatriangulation and theory building to strengthen our theorizing on technological development of manufacturing firms. AMT literature is reviewed and by means of bracketing, the paper identifies a set of problematic assumptions embedded within traditional AMT...... research. A case study is used to emphasize how a process perspective enriches the traditional structural perspective. Finally, through first attempts at theory building, a set of propositions is suggested in order to overcome long-standing problems found in AMT research....

  16. Innovative developments in sand reclamation technologies

    Directory of Open Access Journals (Sweden)

    R. Dañko

    2011-04-01

    Full Text Available Proper sand management and efficient sand reclamation system are two main factors influencing economical and ecological side of modern foundry plant. It is well known fact that the production of 1 metric ton of casting from ferrous alloys generates circa 1 metric ton of waste [1], which due to containing certain amounts of harmful and dangerous compounds should undergo a reclamation – at least of the main component, which means a silica sand grains. The paper present problems of scientific and development research concerning the innovative reclamation technologies of used foundry sands such as: mechanical-cryogenic reclamation and innovative thermal reclamation.

  17. Mobile Haptic Technology Development through Artistic Exploration

    DEFF Research Database (Denmark)

    Cuartielles, David; Göransson, Andreas; Olsson, Tony

    2012-01-01

    This paper investigates how artistic explorations can be useful for the development of mobile haptic technology. It presents an alternative framework of design for wearable haptics that contributes to the building of haptic communities outside specialized research contexts. The paper also presents...... our various wearable haptic systems for mobile computing capable of producing high-order tactile percepts. Our practice based approach suggests a design framework that can be applied to create advanced haptic stimulations/situations for physically embodied interaction in real-world settings....

  18. The development of health technology assessment.

    Science.gov (United States)

    Banta, David

    2003-02-01

    The field of health technology assessment (HTA) is still relatively new, but it has shown remarkable growth over the last decade, having spread first from the United States to Europe, and now to the entire world. HTA seeks to couple evidence with decision-making, and thus has similarities to evidence-based health care and evidence-based policy-making. The early history of HTA, beginning around 1975, reveals a first period of synthesising available evidence-principally that dealing with efficacy and cost-effectiveness of health care interventions-so as to put it in a format helpful to health policy-makers, especially those in national governments. From 1985 or so, the focus of the second period was on seeking more effective links with these policy-makers, particularly in Europe. The most recent period, beginning in the late 1990s, has been increasingly devoted to more effective dissemination and implementation in order to influence administrators and clinicians. While early assessments tended to focus on large, expensive, machine-based technologies, the scope has gradually widened to include smaller technologies, 'softer' technologies (such as counselling), and health care needs. Actual assessments have also taken on broader issues, such as organisational, social, and ethical implications. In the Member States of the European Union (EU), HTA activities are increasingly visible, and almost all now have a national focus for HTA associated with the Ministry of Health or its equivalent. Central and Eastern European countries are also developing HTA activities. Most recently, HTA has been highlighted by health policy documents from the European Commission. It seems likely that HTA will in the future be institutionalised in some form as part of EU activities.

  19. NASA's Exploration Technology Development Program Energy Storage Project Battery Technology Development

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Mercer, Carolyn R.; Jankovsky, Amy L.

    2010-01-01

    Technical Interchange Meeting was held at Saft America s Research and Development facility in Cockeysville, Maryland on Sept 28th-29th, 2010. The meeting was attended by Saft, contractors who are developing battery component materials under contracts awarded through a NASA Research Announcement (NRA), and NASA. This briefing presents an overview of the components being developed by the contractor attendees for the NASA s High Energy (HE) and Ultra High Energy (UHE) cells. The transition of the advanced lithium-ion cell development project at NASA from the Exploration Technology Development Program Energy Storage Project to the Enabling Technology Development and Demonstration High Efficiency Space Power Systems Project, changes to deliverable hardware and schedule due to a reduced budget, and our roadmap to develop cells and provide periodic off-ramps for cell technology for demonstrations are discussed. This meeting gave the materials and cell developers the opportunity to discuss the intricacies of their materials and determine strategies to address any particulars of the technology.

  20. STUDY ON INTERPOLATION ALGORITHM AND CONTROLLING STRATEGY OF THE SWINGING TYPE CAMSHAFT CNC GRINDING%摇摆式凸轮轴数控磨削插补算法及控制策略研究

    Institute of Scientific and Technical Information of China (English)

    贾振元; 郭东明; 傅南红; 王振国; 郭丽莎

    2001-01-01

    根据摇摆式凸轮轴磨削运动几何原理,提出了一种多约束凸轮轴凸轮型线数控磨削插补技术,建立了以凸轮矢角θ为参变量的插补算法模型。给出了插补过程与实时伺服相分离的前后台式控制策略思想,并验证了插补算法的精度和效率,为研制摇摆式凸轮轴数控磨床提供了理论参考。%According to the geometric principle of the swinging typecamshaft grinding setup,an interpolating technology of multi-constrained camshaft profile CNC grinding is proposed. The interpolation algorithm model involving the cam vector angle θ is developed. Based on foreground and background control theory,the controlling strategy with the separation of the interpolation process and real time servo are proposed. Furthermore,the precision and efficiency of the interpolation algorithm are experimentally verified. The theoretical references and criteria for developing swinging type camshaft CNC grinding machine have been established.

  1. Energy technology progress for sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu, D.E.; Drennen, T.E.

    1997-03-01

    Energy security is a fundamental part of a country`s national security. Access to affordable, environmentally sustainable energy is a stabilizing force and is in the world community`s best interest. The current global energy situation however is not sustainable and has many complicating factors. The primary goal for government energy policy should be to provide stability and predictability to the market. This paper differentiates between short-term and long-term issues and argues that although the options for addressing the short-term issues are limited, there is an opportunity to alter the course of long-term energy stability and predictability through research and technology development. While reliance on foreign oil in the short term can be consistent with short-term energy security goals, there are sufficient long-term issues associated with fossil fuel use, in particular, as to require a long-term role for the federal government in funding research. The longer term issues fall into three categories. First, oil resources are finite and there is increasing world dependence on a limited number of suppliers. Second, the world demographics are changing dramatically and the emerging industrialized nations will have greater supply needs. Third, increasing attention to the environmental impacts of energy production and use will limit supply options. In addition to this global view, some of the changes occurring in the US domestic energy picture have implications that will encourage energy efficiency and new technology development. The paper concludes that technological innovation has provided a great benefit in the past and can continue to do so in the future if it is both channels toward a sustainable energy future and if it is committed to, and invested in, as a deliberate long-term policy option.

  2. Current Status of VHTR Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    David Petti; Hans Gougar; Richard Wright; William Windes; Steve Herring; Richard Schultz; Paul Humrickhouse

    2010-10-01

    Abstract – High Temperature Gas-cooled Reactors (HTGRs) featuring particle fuel reached the stage of commercial deployment in the mid-1980s with the Fort St.Vrain and Thorium HochTemperatur Reaktor feeding electricity to the grids in the United States and West Germany, respectively. The technology was then adopted by Japan and China with the operation of the High Temperature Test Reactor in Oarai, Japan and the High Temperature Reactor (HTR-10) in China. Increasing the outlet temperature of the HTGR to even higher temperatures above 900°C will improve the thermodynamic efficiency of the system and enable application of a new class of gas reactor, the very high temperature reactor, to provide process heat, electricity, and hydrogen to chemical industries with the attendant benefits of improved energy security and reduced CO2 emissions. However, the increase in coolant outlet temperature presents a number of technical challenges associated with fuel, materials, power conversion, and analysis methods for the reactor and hydrogen production. The U.S. Department of Energy is sponsoring a broad program of research and development with a goal of addressing the technical challenges over a broad range of outlet temperatures as part of the Next Generation Nuclear Plant Project. This paper describes the research and development activities that are currently underway to realize the technologies needed for an HTGR that features outlet temperatures of 750 to 950°C.

  3. Reprocessing technology development for irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H.; Sakamoto, N. [Oarai Research Establishment, Ibaraki-ken (Japan); Tatenuma, K. [KAKEN Co., Ibaraki-ken (Japan)] [and others

    1995-09-01

    At present, beryllium is under consideration as a main candidate material for neutron multiplier and plasma facing material in a fusion reactor. Therefore, it is necessary to develop the beryllium reprocessing technology for effective resource use. And, we have proposed reprocessing technology development on irradiated beryllium used in a fusion reactor. The preliminary reprocessing tests were performed using un-irradiated and irradiated beryllium. At first, we performed beryllium separation tests using un-irradiated beryllium specimens. Un-irradiated beryllium with beryllium oxide which is a main impurity and some other impurities were heat-treated under chlorine gas flow diluted with Ar gas. As the results high purity beryllium chloride was obtained in high yield. And it appeared that beryllium oxide and some other impurities were removed as the unreactive matter, and the other chloride impurities were separated by the difference of sublimation temperature on beryllium chloride. Next, we performed some kinds of beryllium purification tests from beryllium chloride. And, metallic beryllium could be recovered from beryllium chloride by the reduction with dry process. In addition, as the results of separation and purification tests using irradiated beryllium specimens, it appeared that separation efficiency of Co-60 from beryllium was above 96%. It is considered that about 4% Co-60 was carried from irradiated beryllium specimen in the form of cobalt chloride. And removal efficiency of tritium from irradiated beryllium was above 95%.

  4. Photonics technology development for optical fuzing

    Science.gov (United States)

    Geib, K. M.; Serkland, D. K.; Keeler, G. A.; Peake, G. M.; Mar, A.; von der Lippe, C. M.; Liu, J. J.

    2005-09-01

    This paper describes the photonic component development taking place at Sandia National Laboratories, ARDEC and the Army Research Laboratory in support of an effort to develop a robust, compact, and affordable photonic proximity sensor for munitions fuzing applications. Successful implementation of this sensor will provide a new capability for direct fire applications. The technologies under investigation for the optical fuze design covered in this paper are vertical-cavity surface-emitting lasers (VCSELs), vertical-external-cavity surface-emitting lasers (VECSELs), integrated resonant-cavity photodetectors (RCPDs), and refractive micro-optics. The culmination of this work will be low cost, robust, fully integrated, g-hardened components suitable for proximity fuzing applications. The use of advanced photonic components will enable replacement of costly assemblies that employ discrete lasers, photodetectors, and bulk optics. The integrated devices will be mass produced and impart huge savings for a variety of Army applications. The specific application under investigation is for gun-fired munitions. Nevertheless, numerous civilian uses exist for this proximity sensor in automotive, robotics and aerospace applications. This technology is also applicable to robotic ladar and short-range 3-D imaging.

  5. Investigation on drilling-grinding of CFRP

    Institute of Scientific and Technical Information of China (English)

    Yanming QUAN; Wenwang ZHONG

    2009-01-01

    It is difficult to machine polymer matrix composites reinforced by carbon fibre, and the hole-making process is the most necessary machining process for composite plate products. Conventional drills have a very short life in the drilling of this kind of composites and the quality of the hole is very poor. In this paper, the cemented or plated diamond core tools are tested to make holes in carbon fibre/epoxy composite plates. The effects of machining parameters, cooling and chip removal on the tool life, and the hole quality are investigated. The results indicate that the material removal mechanism of the two kinds of diamond tools is not like the cutting effect of the conventional drilling but similar to that of grinding. Satisfactory effects in making holes in the composites are obtained--quite acceptable machined hole quality, low costs, and long wear-resistant endurance.

  6. Continuous grinding mill simulation using Austin's model

    Directory of Open Access Journals (Sweden)

    André Carlos Silva

    2012-01-01

    Full Text Available Comminution is a frequently-required step in mineral processing and is responsible for almost 90% of all energy consumption in a mineral processing plant. Tumbling mill design has been studied since the middle of the XIX century. There are many comminution models in the literature, with preponderance, however, of Austin’s model (2002 for mineral impact breakage. In this paper, Austin’s model was applied to tubular tumbling mills. Once Austin's model was proposed for batch processing of narrowly-distributed fraction sizes, an artifice has allowed it to be used in continuous grinding mill processes with widely-distributed fraction sizes. Interesting results were obtained with errors less than 0.005 for mills with sharp residence time distributions.

  7. A short guide to technology development in cell biology.

    Science.gov (United States)

    van Steensel, Bas

    2015-03-16

    New technologies drive progress in many research fields, including cell biology. Much of technological innovation comes from "bottom-up" efforts by individual students and postdocs. However, technology development can be challenging, and a successful outcome depends on many factors. This article outlines some considerations that are important when embarking on a technology development project. Despite the challenges, developing a new technology can be extremely rewarding and could lead to a lasting impact in a given field.

  8. Review: DNA Microarray Technology and Drug Development

    Directory of Open Access Journals (Sweden)

    Sushma Drabu

    2010-01-01

    Full Text Available

    On the contrary to slow and non specific traditional drug discovery methods, DNA microarray technology could
    accelerate the identification of potential drugs for treating diseases like cancer, AIDS and provide fruitful results in
    the drug discovery. The technique provides efficient automation and maximum flexibility to the researchers and
    can test thousand compounds at a time. Scientists find DNA microarray useful in disease diagnosis, monitoring
    desired and adverse outcomes of therapeutic interventions, as well as, in the selection, assessment and quality control
    of the potential drugs. In the current scenario, where new pathogens are expected every year, DNA microarray
    promises as an efficient technology to detect new organisms in a short time. Classification of carcinomas at the
    molecular level and prediction of how various types of tumor respond to different therapeutic agents can be made
    possible with the use of microarray analysis. Also, microarray technique can prove instrumental in personalized
    medicines development by providing microarray data of a patient which could be used for identifying diseases,
    treatment specific to individual and trailing disease prognosis. Microarray analysis could be beneficial in the area
    of molecular medicines for analysis of genetic variations and functions of genes in normal individuals and diseased
    conditions. The technique can give satisfactory results in single nucleotide polymorphism (SNP analysis and
    pharmacogenomics studies. The challenges that arise with the technology are high degree of variability with data
    obtained, frequent up gradation of methods and machines and lack of trained manpower. Despite this, DNA microarray
    promises to be the next generation sequencer which could explain how organisms evolve and adapt looking
    at the whole

  9. Energy Storage Technology Development for Space Exploration

    Science.gov (United States)

    Mercer, Carolyn R.; Jankovsky, Amy L.; Reid, Concha M.; Miller, Thomas B.; Hoberecht, Mark A.

    2011-01-01

    The National Aeronautics and Space Administration is developing battery and fuel cell technology to meet the expected energy storage needs of human exploration systems. Improving battery performance and safety for human missions enhances a number of exploration systems, including un-tethered extravehicular activity suits and transportation systems including landers and rovers. Similarly, improved fuel cell and electrolyzer systems can reduce mass and increase the reliability of electrical power, oxygen, and water generation for crewed vehicles, depots and outposts. To achieve this, NASA is developing non-flow-through proton-exchange-membrane fuel cell stacks, and electrolyzers coupled with low permeability membranes for high pressure operation. The primary advantage of this technology set is the reduction of ancillary parts in the balance-of-plant fewer pumps, separators and related components should result in fewer failure modes and hence a higher probability of achieving very reliable operation, and reduced parasitic power losses enable smaller reactant tanks and therefore systems with lower mass and volume. Key accomplishments over the past year include the fabrication and testing of several robust, small-scale non-flow-through fuel cell stacks that have demonstrated proof-of-concept. NASA is also developing advanced lithium-ion battery cells, targeting cell-level safety and very high specific energy and energy density. Key accomplishments include the development of silicon composite anodes, lithiatedmixed- metal-oxide cathodes, low-flammability electrolytes, and cell-incorporated safety devices that promise to substantially improve battery performance while providing a high level of safety.

  10. Experimental Studies on Ultrasonic Vibration Grinding of the Workpiece Made from Fine-crystalline Zirconia Ceramics

    Institute of Scientific and Technical Information of China (English)

    WU Yan; ZHU Xun-sheng; ZHAO Bo

    2006-01-01

    The performances of fine-crystalline zirconia ceramics in workpiece ultrasonic vibration grinding (WUVG) and conventional grinding (CG) with diamond wheel were researched. The effects of WUVG and CG on material removal rate, grinding forces, surface roughness and microstructure of zirconia ceramic were investigated.Experimental results indicated that: (1) The material removal rate (MRR) in ultrasonic grinding process is two times as large as that of in conventional grinding. The material removal rate increases with increasing grinding depth in both ultrasonic grinding and conventional grinding.(2) The ultrasonic vibration grinding force is lower than that of conventional grinding force, and the increase of the worktable speed leads to a decrease of the grinding force,while the grinding force increases with larger grinding depth in both WUVG and CG. (3) The surface of ultrasonic vibration grinding has no spur and build-up edge and its surface roughness is smaller than that of CG significantly.Surface quality of WUVG is superior to that of conventional grinding, it is easy for ultrasonic vibration grinding that material removal mechanism is ductile grinding.

  11. Development and application prospects of piezoelectric precision driving technology

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    With the rapid development of science and technology,microelectronics manufacturing,photonics technology,space technology,ultra-precision machining,micro-robotics,biomedical engineering and other fields urgently need the support of modern precision driving theory and technology.Modern precision driving technology can be generally divided into two parts:electromagnetic and non-electromagnetic driving technology.Electromagnetic driving technology is based on traditional technology,has a low thrust-weight ratio,and needs deceleration devices with a cumbrous system or a complex structure.Moreover,it is difficult to improve positioning accuracy with this technology type.Thus,electromagnetic driving technology is still unable to meet the requirements for the above applications.Non-electromagnetic driving technology is a new choice.As a category of non-electromagnetic driving technology,piezoelectric driving technology becomes an important branch of modern precision driving technology.High holding torque and acute response make it suitable as an accurate positioning actuator.This paper presents the development of piezoelectric precision driving technology at home and abroad and gives an in-depth analysis.Future perspectives on the technology's applications in the following fields are described:1) integrated circuit manufacturing technology;2) fiber optic component manufacturing technology;3) micro parts manipulation and assembly technology;4) biomedical engineering;5)aerospace technology;and 6) ultra-precision processing technology.

  12. Liquid metal reactor development. Development of LMR coolant technology

    Energy Technology Data Exchange (ETDEWEB)

    Nam, H. Y.; Choi, S. K.; Hwang, J. s.; Lee, Y. B.; Choi, B. H.; Kim, J. M.; Kim, Y. G.; Kim, M. J.; Lee, S. D.; Kang, Y. H.; Maeng, Y. Y.; Kim, T. R.; Park, J. H.; Park, S. J.; Cha, J. H.; Kim, D. H.; Oh, S. K.; Park, C. G.; Hong, S. H.; Lee, K. H.; Chun, M. H.; Moon, H. T.; Chang, S. H.; Lee, D. N.

    1997-07-15

    Following studies have been performed during last three years as the 1.2 phase study of the mid and long term nuclear technology development plan. First, the small scale experiments using the sodium have been performed such as the basic turbulent mixing experiment which is related to the design of a compact reactor, the flow reversal characteristics experiment by natural circulation which is necessary for the analysis of local flow reversal when the electromagnetic pump is installed, the feasibility test of the decay heat removal by wall cooling and the operation of electromagnetic pump. Second, the technology of operation mechanism of sodium facility is developed and the technical analysis and fundamental experiments of sodium measuring technology has been performed such as differential pressure measuring experiment, local flow rate measuring experimenter, sodium void fraction measuring experiment, under sodium facility, the free surface movement experiment and the side orifice pressure drop experiment. A new bounded convection scheme was introduced to the ELBO3D thermo-hydraulic computer code designed for analysis of experimental result. A three dimensional computer code was developed for the analysis of free surface movement and the analysis model of transmission of sodium void fraction was developed. Fourth, the small scale key components are developed. The submersible-in-pool type electromagnetic pump which can be used as primary pump in the liquid metal reactor is developed. The SASS which uses the Curie-point electromagnet and the mock-up of Pantograph type IVTM were manufactured and their feasibility was evaluated. Fifth, the high temperature characteristics experiment of stainless steel which is used as a major material for liquid metal reactor and the material characteristics experiment of magnet coil were performed. (author). 126 refs., 98 tabs., 296 figs.

  13. Technology platforms: opportunities and development perspectives

    Science.gov (United States)

    Belyakov, G. P.; Avramchikova, N. T.; Belyakova, G. Y.; Chuvashova, M. N.

    2016-11-01

    The term “technology platform” is used to define thematic scopes in terms of which technological priorities are formed concerning state, business, science and education cooperation that are aimed to solve the problem of state technological independence. The authors have examined the implementation of this tool so that to concentrate essential resources in priority-driven vectors of science and technological advancement of a guiding cluster of innovative technologies in the field of space applications.

  14. Grinding temperature and energy ratio coe cient in MQL grinding of high-temperature nickel-base alloy by using di erent vegetable oils as base oil

    Institute of Scientific and Technical Information of China (English)

    Li Benkai; Li Changhe; Zhang Yanbin; Wang Yaogang; Jia Dongzhou; Yang Min

    2016-01-01

    Vegetable oil can be used as a base oil in minimal quantity of lubrication (MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force, and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grind-ing temperature, and energy ratio coefficient of MQL grinding were compared among the seven veg-etable oil types. Results revealed that (1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding tem-perature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less vis-cous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid;and (7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force, 87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7%energy ratio coefficient

  15. Automatic detection of thermal damage in grinding process by artificial neural network

    Directory of Open Access Journals (Sweden)

    Fábio Romano Lofrano Dotto

    2003-12-01

    Full Text Available This work aims to develop an intelligent system for detecting the workpiece burn in the surface grinding process by utilizing a multi-perceptron neural network trained to generalize the process and, in turn, obtnaing the burning threshold. In general, the burning occurrence in grinding process can be detected by the DPO and FKS parameters. However, these ones were not efficient at the grinding conditions used in this work. Acoustic emission and electric power of the grinding wheel drive motor are the input variable and the output variable is the burning occurrence to the neural network. In the experimental work was employed one type of steel (ABNT-1045 annealed and one type of grinding wheel referred to as TARGA model ART 3TG80.3 NVHB.Esse trabalho tem por objetivo o desenvolvimento de um sistema inteligente para detecção da queima no processo de retificação tangencial plana através da utilização de uma rede neural perceptron multi camadas, treinada para generalizar o processo e, conseqüentemente, obter o limiar de queima. Em geral, a ocorrência da queima no processo de retificação pode ser detectada pelos parâmetros DPO e FKS. Porém esses parâmetros não são eficientes nas condições de usinagem usadas nesse trabalho. Os sinais de emissão acústica e potência elétrica do motor de acionamento do rebolo são variáveis de entrada e a variável de saída é a ocorrência da queima. No trabalho experimental, foram empregados um tipo de aço (ABNT 1045 temperado e um tipo de rebolo denominado TARGA, modelo ART 3TG80.3 NVHB.

  16. Surface quality of a 1m Zerodur part using an effective grinding mode

    Science.gov (United States)

    Tonnellier, X.; Shore, P.; Morantz, P.; Orton, D.

    2008-09-01

    A new ultra precision large optics grinding machine, BoX (R) , has been developed at Cranfield University. This machine is located at the UK's Ultra Precision Surfaces laboratory at the OpTIC Technium, North Wales. This machine offers a rapid and economic solution for grinding large off-axis aspherical and free-form optical components. This paper presents an analysis of surface and subsurface damage assessments of Zerodur(R) ground using diamond resin bonded grinding wheels. Zerodur(R) was tested as it is one of the materials currently under study for making extremely large telescope (ELT) segmented mirrors such as in the E-ELT project. The grinding experiments have been conducted on the BoX(R) grinding machine using wheels with grit sizes of 76 μm, 46 µm and 25 μm. The highest material removal rate (187.5 mm3/s) used ensures that a 1 metre diameter optic can be ground in less than 10 hours. The surface roughness and surface profile were measured using a Form Talysurf. The subsurface damage was revealed using a sub aperture polishing process in combination with an etching technique on small parts. These results are compared with the targeted form accuracy of 1 μm p-v over a 1 metre part, surface roughness of 50-150 nm RMS and subsurface damage in the range of 2-5 μm. This process stage was validated on a 1 metre hexagonal Zerodur(R) part.

  17. Ibuprofen-Amino Acids Co-Crystal Screening Via Co-Grinding Methods

    Directory of Open Access Journals (Sweden)

    Othman Muhamad Fitri

    2016-01-01

    Full Text Available The importance of pharmaceutical co-crystals now has been recognized in order to improve the research and development in pharmaceutical industries. Low solubility of active pharmaceutical ingredient (API has led to the growth of new pharmaceutical co-crystals formation as it enhances the physicochemical properties of the API. In this works, preparation of new co-crystal formation between ibuprofen (IBP with selected amino acid compounds were performed by using dry grinding and liquid assisted grinding (LAG techniques. Ibuprofen (IBP was selected as the API meanwhile glycine (GLY, L-alanine (ALA and L-proline (PRO were selected as co-crystal former (CCF agents. The products of IBP-co-former from grinding experiments for the formation of co-crystals were characterized and verified using X-Ray Powder Diffraction (XRPD, Differential Scanning Calorimetry (DSC and Fourier Transform Infra-Red Spectroscopy (FTIR. The finding reveals that the IBP-PRO co-crystals have successfully formed. For IBP-PRO system, new crystalline peaks from XRPD were recorded at 2θ values of 4.374°, 5.436° and 10.944° from dry grinding technique and 4.41°, 5.436° and 10.962° for liquid assisted grinding (LAG technique. A new melting point of 257.49 °C was discovered for IBP-ALA indicates the possibility of co-crystals formation. On the other hand, the analysis for IBP-GLY shows that no co-crystals formed in the system.

  18. Frequency domain identification of grinding stiffness and damping

    Science.gov (United States)

    Leonesio, Marco; Parenti, Paolo; Bianchi, Giacomo

    2017-09-01

    As equivalent stiffness and damping of the grinding process dominate cutting stability, their identification is essential to predict and avoid detrimental chatter occurrence. The identification of these process constants is not easy in large cylindrical grinding machines, e.g. roll grinders, since there are no practical ways to measure cutting force normal component. This paper presents a novel frequency domain approach for identifying these process parameters, exploiting in-process system response, measured via impact testing. This method adopts a sub-structuring approach to couple the wheel-workpiece relative dynamic compliance with a two-dimensional grinding force model that entails both normal and tangential directions. The grinding specific energy and normal force ratio, that determine grinding stiffness and damping, are identified by fitting the closed loop FRF (Frequency Response Function) measured during specific plunge-grinding tests. The fitting quality supports the predictive capability of the model. Eventually, the soundness of the proposed identification procedure is further assessed by comparing the grinding specific energy identified through standard cutting power measurements.

  19. Development of advanced LWR fuel pellet technology

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kun Woo; Kang, K.W.; Kim, K. S.; Yang, J. H.; Kim, Y. M.; Kim, J. H.; Bang, J. B.; Kim, D. H.; Bae, S. O.; Jung, Y. H.; Lee, Y. S.; Kim, B. G.; Kim, S. H

    2000-03-01

    A UO{sub 2} pellet was designed to have a grain size of larger than 12 {mu}m, and a new duplex design that UO{sub 2}-Gd{sub 2}O{sub 3} is in the core and UO{sub 2}-Er{sub 2}O{sub 3} in the periphery was proposed. A master mixing method was developed to make a uniform mixture of UO{sub 2} and additives. The open porosity of UO{sub 2} pellet was reduced by only mixing AUC-UO{sub 2} powder with ADU-UO{sub 2} or milled powder. Duplex compaction tools (die and punch) were designed and fabricated, and duplex compacting procedures were developed to fabricate the duplex BA pellet. In UO{sub 2} sintering, the relations between sintering variables (additive, sintering gas, sintering temperature) and pellet properties (density, grain size, pore size) were experimentally found. The UO{sub 2}-U{sub 3}O{sub 8} powder which is inherently not sinterable to high density could be sintered well with the aid of additives. U{sub 3}O{sub 8} single crystals were added to UO{sub 2} powder, and homogeneous powder mixture was pressed and sintered in a reducing atmosphere. This technology leads to a large-grained pellet of 12-20 {mu}m. In UO{sub 2}-Gd{sub 2}O{sub 3} sintering, the relations between sintering variables (additives, sintering gas) and pellet properties (density, grain size) were experimentally found. The developed technology of fabricating a large-grained UO{sub 2} pellet has been optimized in a lab scale. Pellet properties were investigated in the fields of (1) creep properties, (2) thermal properties, (3) O/M ratios and (4) unit cell lattice. (author)

  20. Next stages in HDR technology development

    Energy Technology Data Exchange (ETDEWEB)

    Duchane, D.V.

    1993-03-01

    Twenty years of research and development have brought HDR heat mining technology from the purely conceptual stage to the establishment of an engineering-scale heat mine at Fenton Hill, NM. In April 1992, a long-term flow test (LTFT) of the HDR reservoir at Fenton Hill was begun. The test was carried out under steady-state conditions on a continuous basis for four months, but a major equipment failure in late July forced a temporary suspension of operations. Even this short test provided valuable information and extremely encouraging results as summarized below: There was no indication of thermal drawdown of the reservoir. There was evidence of increasing access to hot rock with time. Water consumption was in the rangki of 10--12%. Measured pumping costs were $0.003 per kilowatt of energy produced. Temperature logs conducted in the reservoir production zone during and after the flow test confirmed the fact that there was no decline in the average temperature of the fluid being produced from the reservoir. In fact, tracer testing showed that the fluid was taking more indirect pathways and thus contacting a greater amount of hot rock as the test progressed. Water usage quickly dropped to a level of 10--15 gallons per minute, an amount equivalent to about 10--12% of the injected fluid volume. At a conversion rate of 10--15%, these would translate to effective ``fuel costs`` of 2--3{cents} per kilowatt hour of electricity production potential. The completion of the LTFT will set the stage for commercialization of HDR but will not bring HDR technology to maturity. Relatively samples extensions of the current technology may bring significant improvements in efficiency, and these should be rapidly investigated. In the longer run, advanced operational concepts could further improve the efficiency of HDR energy extraction and may even offer the possibility of cogeneration schemes which solve both energy and water problems throughout the world.

  1. User Interface Technology for Formal Specification Development

    Science.gov (United States)

    Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

    1994-01-01

    Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

  2. Development of Safety Analysis Technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Kwon, Y. M.; Kim, E. K. [KAERI, Daejeon (Korea, Republic of)

    2007-06-15

    In the safety analysis code system development area, the development of an analysis code for a flow blockage could be brought to completion throughout an integrated validation of MATRA-LMR-FB. The safety analysis code of SSC-K has been evolved by building detailed reactivity models and a core 3 dimensional T/H model into it, and developing its window version. A basic analysis module for SFR features also have been developed incorporating a numerical method, best estimated correlations, and a code structure module. For the analysis of the HCDA initiating phase, a sodium boiling model to be linked to SSC-K and a fuel transient performance/cladding failure model have been developed with a state-of-the-art study on the molten fuel movement models. Besides, scoping analysis models for the post-accident heat removal phase have been developed as well. In safety analysis area, the safety criteria for the KALIMER-600 have been set up, and an internal flow channel blockage and local faults have been analyzed for the assembly safety evaluation, while key safety concepts of the KALIMER-600 has been investigated getting through the analyses of ATWS as well as design basis accidents like TOP and LOF, from which the inherent safety due to a core reactivity feedback has been assessed. The HCDA analysis for the initiating phase and an estimation of the core energy release, subsequently, have been followed with setup of the safety criteria as well as T/H analysis for the core catcher. The thermal-hydraulic behaviors, and released radioactivity sources and dose rates in the containment have been analyzed for its performance evaluation in this area. The display of a data base for research products on the KALIMER Website and the detailed process planning with its status analysis, have become feasible from achievements in the area of the integrated technology development and establishment

  3. Ultraprecision, high stiffness CNC grinding machines for ductile mode grinding of brittle materials

    Science.gov (United States)

    McKeown, Patrick A.; Carlisle, Keith; Shore, Paul; Read, R. F.

    1990-10-01

    Under certain controlled conditions it is now possible to machine brittle materials such as glasses and ceramics using single or multi-point diamond tools (grinding), so that material is removed by plastic flow, leaving crack-free surfaces. This process is called 'shear' or 'ductile' mode grinding. It represents a major breakthrough in modern manufacturing engineering since it promises to enable: - complex optical components, both transmission and reflecting to be generated by advanced CNC machines with very little (or even zero) subsequent polishing. - complex shaped components such as turbine blades, nozzle guide vanes, etc. to be finish machined after near net shape forming, to high precision in advanced ceramics such as silicon nitride, without inducing micro-cracking and thus lowering ultimate rupture strength and fatigue life. Ductile mode "damage free" grinding occurs when the volume of materials stressed by each grit of the grinding wheel is small enough to yield rather than exhibit brittle fracture, i.e. cracking. In practice, this means maintaining the undeformed chip thickness to below the ductile-brittle transition value; this varies from material to material but is generally in the order of 0.1 pm or 100 nm, (hence the term "nanogrinding" is sometimes used) . Thus the critical factors for operating successfully in the ductile regime are machine system accuracy and dynamic stiffness between each grit and the workpiece. In detail this means: (i) High precision 'truing' of the diamond grits, together with dressing of the wheel bond to ensure adequate ' openness'; (ii) Design and build of the grinding wheel spindle with very high dynamic stiffness; error motions, radial and axial, must be considerably less than 100 nfl. (iii) Design and build of the workpiece carriage motion system with very high dynamic stiffness; error motions, linear or rotary, must be well within 100 nm. (iv) Smooth, rumble-free, high-stiffness servo-drives controlling the motions

  4. Integrated diesel engine NOx reduction technology development

    Energy Technology Data Exchange (ETDEWEB)

    Hoelzer, J.; Zhu, J.; Savonen, C.L. [Detroit Diesel Corp., MI (United States); Kharas, K.C.C.; Bailey, O.H.; Miller, M.; Vuichard, J. [Allied Signal Environmental Catalysts, Tulsa, OK (United States)

    1997-12-31

    The effectiveness of catalyst performance is a function of the inlet exhaust gas temperature, gas flow rate, concentration of NO{sub x} and oxygen, and reductant quantity and species. Given this interrelationship, it becomes immediately clear that an integrated development approach is necessary. Such an approach is taken in this project. As such, the system development path is directed by an engine-catalyst engineering team. Of the tools at the engine engineer`s disposal the real-time aspects of computer assisted subsystem modeling is valuable. It will continue to be the case as ever more subtle improvements are needed to meet competitive performance, durability, and emission challenges. A review of recent prototype engines has shown that considerable improvements to base diesel engine technology are being made. For example, HSDI NO{sub x} has been reduced by a factor of two within the past ten years. However, additional substantial NO{sub x}/PM reduction is still required for the future. A viable lean NO{sub x} catalyst would be an attractive solution to this end. The results of recent high and low temperature catalyst developments were presented. High temperature base metal catalysts have been formulated to produce very good conversion efficiency and good thermal stability, albeit at temperatures near the upper range of diesel engine operation. Low temperature noble metal catalysts have been developed to provide performance of promising 4-way control but need increased NO{sub x} reduction efficiency.

  5. Development of fission Mo-99 production technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Ho; Choung, W. M.; Lee, K. I. and others

    2001-05-01

    This R and D project is planed to supply domestic demands of Mo-99 through fission route, and consequently this project will be expected to rise up utilization of HANARO and KAERI's capability for marketing extension into domestic and oversea radiopharmaceutical market. HEU and LEU target types are decided and designed for fission Mo-99 production in domestic. Experimental study of target fabrication technology was performed and developed processing equipments. And conceptual design of target loading/unloading in/from HANARO device are performed. Tracer test of Mo-99 separation and purification process was performed, test results reach to Mo-99 recovery yield above 80% and decontamination factor above 1600. Combined Mo-99 separation and purification process was decided for hot test scheduled from next year, and performance test was performed. Conceptual design for modification of existing hot cell for fission Mo-99 production facility was performed and will be used for detail design. Assumption for the comparison of LEU and HEU target in fission Mo-99 production process were suggested and compared of merits and demerits in view of fabrication technology and economy feasibility.

  6. Scientific and Technological Development of Hadrontherapy

    Science.gov (United States)

    Braccini, Saverio

    2010-04-01

    Hadrontherapy is a novel technique of cancer radiation therapy which employs beams of charged hadrons, protons and carbon ions in particular. Due to their physical and radiobiological properties, they allow one to obtain a more conformal treatment with respect to photons used in conventional radiation therapy, sparing better the healthy tissues located in proximity of the tumour and allowing a higher control of the disease. Hadrontherapy is the direct application of research in high energy physics, making use of specifically conceived particle accelerators and detectors. Protons can be considered today a very important tool in clinical practice due to the several hospital-based centres in operation and to the continuously increasing number of facilities proposed worldwide. Very promising results have been obtained with carbon ion beams, especially in the treatment of specific radio resistant tumours. To optimize the use of charged hadron beams in cancer therapy, a continuous technological challenge is leading to the conception and to the development of innovative methods and instruments. The present status of hadrontherapy is reviewed together with the future scientific and technological perspectives of this discipline.

  7. Development and performance evaluation of the abrasive grains vacuum pre-brazed diamond grinding wheel%磨粒真空预钎焊金刚石磨轮的研制及其加工性能分析

    Institute of Scientific and Technical Information of China (English)

    夏斯伟; 肖冰; 段端志; 袁卫; 李文杰

    2014-01-01

    分别采用Cu-Sn-Ti合金、A合金稀释的Ni-Cr合金对金刚石真空预钎焊处理,将预钎焊磨粒与金属粉末混匀后热压烧结制作节块和磨轮,并进行磨轮对比磨削实验。由抗压强度、冲击韧性实验测试磨粒力学性能,由抗弯强度实验测试节块抗弯强度。由扫描电镜分析磨粒与胎体界面结合效果。结果表明:Cu基预钎焊磨粒预钎焊层分布均匀,力学性能比A-Ni基预钎焊磨粒提高;预钎焊节块抗弯强度高于常规节块;Cu 基预钎焊磨粒与胎体结合致密,界面处 Ti 元素偏聚富集,Fe、Cu 元素相互扩散,实现了牢固化学冶金结合;预钎焊磨轮加工性能明显优于常规磨轮,Cu 基预钎焊磨轮锋利度比 Ni 基预钎焊磨轮提高约15%,实现了多层钎焊效果。%Metalization of diamond grains are realized under controlled vacuum brazing conditions using Cu-Sn-Ti filler and Ni-Cr filler added with A powder respectively Pre-brazed diamond segments and grinding wheels are fabricated by powder metallurgy sintering process Comparative grinding experiments on 6 3 5 # granite are carried out between pre-brazed wheels and conventional wheels Mechanical properties of the abrasive grains are evaluated by compressive strength tests and impact toughness tests Flexural strength of different segments are evaluated by three-point bending strength tests Interfaces between the pre-brazed diamond grains and matrix metals are analyzed by SEM Results show that Cu-based pre-brazed diamond of which pre-brazed metal layer is uniform distributed thermal damage degree is lower than that of A Ni-based diamond Bending strength of pre-brazed diamond segments are higher than the conventional segments Accumulation of titanium element and interdiffusion of iron & copper elements result in the high bonding strength at the interface Machining characteristics of pre-brazed diamond grinding wheels are all better than the conventional ones Sharpness of Cu

  8. On the development trend of computer application technology

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhi

    2014-01-01

    The development of computer application technology for people living and working has a very important significance. Dependent on computers are increasingly high. It put forward the development of computer application technology higher requirements. Only constant reform and renewal can meet the needs of social development. It is the only way to meet the development of the concept of sustainable development, and provide ongoing tech driving force for China's development. Based on this, the development trend of computer technology is discused.

  9. A mathematical model for surface roughness of fluidic channels produced by grinding aided electrochemical discharge machining (G-ECDM

    Directory of Open Access Journals (Sweden)

    Ladeesh V. G.

    2017-01-01

    Full Text Available Grinding aided electrochemical discharge machining is a hybrid technique, which combines the grinding action of an abrasive tool and thermal effects of electrochemical discharges to remove material from the workpiece for producing complex contours. The present study focuses on developing fluidic channels on borosilicate glass using G-ECDM and attempts to develop a mathematical model for surface roughness of the machined channel. Preliminary experiments are conducted to study the effect of machining parameters on surface roughness. Voltage, duty factor, frequency and tool feed rate are identified as the significant factors for controlling surface roughness of the channels produced by G-ECDM. A mathematical model was developed for surface roughness by considering the grinding action and thermal effects of electrochemical discharges in material removal. Experiments are conducted to validate the model and the results obtained are in good agreement with that predicted by the model.

  10. Ten Items of Integrated Technology Developed by CNPC

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The technological work of China National Petroleum Corporation (CNPC) was based on the company's general development strategy to become a multinational giant with international competitiveness during the 10th FiveYear Plan Period (2001-2005). The technological efforts were focused on strengthening strategic management of technology to identify the technological development targets, optimizing allocation of technological resources and increasing technological investment to highlight creation of key technology. Aiming at the important and key technologies needed for main business development,CNPC launched 15 technological projects at the State level with a 100 percent completion rate and 379 other projects at the corporate level with a 92.8 percent completion rate. With a number of high-level results achieved, CNPC has developed 10 items of integrated technology.

  11. McCarter superfinish grinding for silicon -- an update.

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, F.; Khounsary, A.; McCarter, D.; Krasnicki, F.; Tangedahl, M.

    2000-11-03

    A grinding technique, referred to as the McCarter Superfinish, for grinding large size optical components is discussed and certain surface characterization information about flatness and the relative magnitude of the subsurface damage in silicon substrates is reported. The flatness measurements were obtained with a Zygo surface analyzer, and the substrate damage measurements were made by x-ray diffraction and acid etching. Results indicate excellent control of flatness and fine surface finish. X-ray measurements show that the diamond wheels with small particle sizes used in the final phases of the grinding operation renders surfaces with relatively small subsurface damage.

  12. Effect of wet grinding on structural properties of ball clay

    Science.gov (United States)

    Purohit, A.; Hameed, A.; Chander, S.; Nehra, S. P.; Singh, P.; Dhaka, M. S.

    2015-05-01

    In this paper, the effect of wet grinding on structural properties of ball clay is undertaken. The wet grinding treatment was performed employing ball and vibro mills for different time spells of 2, 4, 8 and 16 hours. The structural properties were carried out using X-ray diffraction (XRD). The structure of ground samples is found to be simple cubic. The crystallographic parameters are calculated and slight change in lattice constant, inter planner spacing and particle size is observed with grinding treatment. The results are in agreement with the available literature.

  13. Investigation on the Surface Coating of Grinding Balls

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The surface coating of grinding balls was investigated experimentally. The results show that a coating may form on the surface of grinding balls when Cr or Al powders are subjected to ball grinding. The plastic deformation of the ball surface plays an important role during the coating formation, and the strong binding force between the powders and the balls is a necessary pre-condition. The thickness of coating increases with the plasticity of the powders and the balls. Annealing the balls with coating will result in an obvious diffusion of the elements in the bonding zone of inter-face.

  14. Development of proliferation resistant isotope separation technology

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Doyoung; Ko, Kwanghoon; Kim, Taeksoo; Park, Hyunmin; Lim, Gwon; Cha, Yongho; Han, Jaemin; Baik, Sunghoon; Cha, Hyungki

    2012-02-15

    This project was accomplished with an aim of establishing the industrial facilities for isotope separation in Korea. The experiment for the measurement of neutrino mass that has been an issue in physics, needs very much of enriched calcium-48 isotope. However, calcium-48 isotope can be produced only by the electro-magnetic method and, thus, its price is very expensive. Therefore, we expect that ALSIS can replace the electro-magnetic method for calcium-48 isotope production. In this research stage, the research was advanced systematically with core technologies, such as atomic vapor production, the measurement of vapor characteristics and stable and powerful laser development. These researches will be the basis of the next research stages. In addition, the international research trends and cooperation results are reported in this report.

  15. Technology development for DUPIC process safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Hong, J. S.; Kim, H. D.; Lee, Y. G.; Kang, H. Y.; Cha, H. R.; Byeon, K. H.; Park, Y. S.; Choi, H. N. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-07-01

    As the strategy for DUPIC(Direct Use of spent PWR fuel In CANDU reactor) process safeguards, the neutron detection method was introduced to account for nuclear materials in the whole DUPIC process by selectively measuring spontaneous fission neutron signals from {sup 244}Cm. DSNC was designed and manufactured to measure the account of curium in the fuel bundle and associated process samples in the DUPIC fuel cycle. The MCNP code had response profile along the length of the CANDU type fuel bundle. It was found experimentally that the output signal variation due to the overall azimuthal asymmetry was less than 0.2%. The longitudinal detection efficiency distribution at every position including both ends was kept less than 2% from the average value. Spent fuel standards almost similar to DUPIC process material were fabricated from a single spent PWR fuel rod and the performance verification of the DSNC is in progress under very high radiation environment. The results of this test will be eventually benchmarked with other sources such as code simulation, chemical analysis and gamma analysis. COREMAS-DUPIC has been developed for the accountability management of nuclear materials treated by DUPIC facility. This system is able to track the controlled nuclear materials maintaining the material inventory in near-real time and to generate the required material accountability records and reports. Concerning the containment and surveillance technology, a focused R and D effort is given to the development of unattended continuous monitoring system. Currently, the component technologies of radiation monitoring and surveillance have been established, and continued R and D efforts are given to the integration of the components into automatic safeguards diagnostics. (author).

  16. Airbreathing Hypersonic Technology Vision Vehicles and Development Dreams

    Science.gov (United States)

    McClinton, C. R.; Hunt, J. L.; Ricketts, R. H.; Reukauf, P.; Peddie, C. L.

    1999-01-01

    Significant advancements in hypersonic airbreathing vehicle technology have been made in the country's research centers and industry over the past 40 years. Some of that technology is being validated with the X-43 flight tests. This paper presents an overview of hypersonic airbreathing technology status within the US, and a hypersonic technology development plan. This plan builds on the nation's large investment in hypersonics. This affordable, incremental plan focuses technology development on hypersonic systems, which could be operating by the 2020's.

  17. Postharvest biology and technology research and development ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-09-03

    Sep 3, 2008 ... The applications of biological control agents in pre- and post- ... The evolution of new technologies continues to change ... advances in biotechnology, environment technologies, ..... genetic potential of these antagonists.

  18. Concept and technology development for HOPE spaceplane

    Science.gov (United States)

    Ito, Testsuichi; Akimoto, Toshio; Miyaba, Hiroshi; Kano, Yasuomi; Suzuki, Norio

    1990-10-01

    HOPE spaceplane has been studied for several years in NASDA. The purpose of the current study is to establish the feasible concept of HOPE and to prepare the technical bases. The primary mission of HOPE is the Space Station Freedom/JEM logistics transportation complementing with U.S. Space Shuttle fleet. Besides previous concept of ten ton class orbiter launched by H-II rocket, extended size orbiter concept has been studied along with enhancement of H-II rocket, which is called H-IID (derivative) rocket. An orbiter derived from this study weighs 20t at lift off and has three to five tons of payload capability, based on the H-IID configuration of H-II first stage with six solid boosters strapped on. Subsystems design and technology development in such field as aerodynamics, structure and materials, guidance-navigation and control, and Space Station interface are in progress. In order to acquire the reentry flight data, orbital reentry experiment is planned and under development utilizing orbital flight opportunity of H-II test flight in 1993. These concepts are under review and trade off in NASDA for establishing HOPE development scenario.

  19. Liquid metal reactor development. Development of LMR design technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Cheol; Kim, Y. I.; Kim, Y. G.; Kim, E. K.; Song, H.; Chung, H. T.; Sim, Y. S.; Min, B. T.; Kim, Y. S.; Wi, M. H.; Yoo, B.; Lee, J. H.; Lee, H. Y.; Kim, J. B.; Koo, G. H.; Hahn, D. H.; Na, B. C.; Hwang, W.; Nam, C.; Ryu, W. S.; Lim, G. S.; Kim, D. H.; Kim, J. D.; Gil, C. S.

    1997-07-01

    This project was performed in five parts, the scope and contents of which are as follows: The nuclear data processing system was established and the KFS group constant library was improved and verified. Basic computation system was constructed by either developing or adding its function. Input/output (I/O) interface processing was developed to establish an integrated calculation system for LMR core nuclear rand thermal-hydraulic design and analysis. An experimental data analysis was performed to validate the constructed core neutronic calculation system. Using the established core calculation system and design technology, preliminary core design and performance analysis on the domestic LMR core design concept were carried out. To develop the basic technology of the LMR system analysis, LMR system behavior characteristics evaluation, thermal -fluid system analysis in the reactor pool, preliminary overall plant analysis and computer codes development have been performed. A porous model and simple one-dimensional model have been evaluated for the reactor pool analysis. The evaluation of the residual heat removal system on different design concepts has been also conducted. For the development of high temperature structural analysis, the heat transfer and thermal stress analyses were performed using finite element program with user subroutine that has been developed with an implementation of the Chaboche constitutive model for inelastic analysis capability, and the evaluation of creep-fatigue and ratcheting behavior of high temperature structure was carried out using this program. for development of the seismic isolation system and to predict the shear behavior for the laminated rubber bearing were established. And the behavior tests of isolation bearing and rubber specimens were carried out, and the seismic response tests for the isolation model structure were performed using the 30 ton shaking table. (author). 369 refs., 119 tabs., 320 figs.

  20. Advancing Technology Education: The Role of Professional Development.

    Science.gov (United States)

    Loucks-Horsley, Susan; Bybee, Rodger W.

    2000-01-01

    The technology literacy standards will necessitate increased professional development for those required to implement them. Four areas to guide professional development plans are as follows:(1) learning about technology; (2) learning to teach technology; (3) self-assessment and continuous improvement; and (4) sustained professional development.…

  1. 30 CFR 402.11 - Technology-development project applications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Technology-development project applications... RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Application, Evaluation, and Management Procedures § 402.11 Technology-development project applications. (a) Grant awards will be used...

  2. Trusted Autonomy: Concept Development in Technology Foresight

    Science.gov (United States)

    2015-09-01

    Science and Technology Group TFF Technology Forecasting and Futures US United States UNCLASSIFIED DST-Group-TR-3153 UNCLASSIFIED 1 1...organisations across the world are increasingly being pressed to employ a range of disparate technologies in new and innovative ways to retain a...Program Objectives Technology Futures and Forecasting (TFF) group, within the DST Group, is a collaborative research facility for the study of

  3. Digital Technology and Student Cognitive Development

    Science.gov (United States)

    Cavanaugh, J. Michael; Giapponi, Catherine C.; Golden, Timothy D.

    2016-01-01

    Digital technology has proven a beguiling, some even venture addictive, presence in the lives of our 21st century (millennial) students. And while screen technology may offer select cognitive benefits, there is mounting evidence in the cognitive neuroscience literature that digital technology is restructuring the way our students read and think,…

  4. Developing Technological Fluency through Creative Robotics

    Science.gov (United States)

    Bernstein, Debra Lynn

    2010-01-01

    Children have frequent access to technologies such as computers, game systems, and mobile phones (Sefton-Green, 2006). But it is useful to distinguish between engaging with technology as a "consumer" and engaging as a "creator" or designer (Resnick & Rusk, 1996). Children who engage as the former can use technology efficiently, while those who…

  5. Digital Technology and Student Cognitive Development

    Science.gov (United States)

    Cavanaugh, J. Michael; Giapponi, Catherine C.; Golden, Timothy D.

    2016-01-01

    Digital technology has proven a beguiling, some even venture addictive, presence in the lives of our 21st century (millennial) students. And while screen technology may offer select cognitive benefits, there is mounting evidence in the cognitive neuroscience literature that digital technology is restructuring the way our students read and think,…

  6. Developing Technological Fluency through Creative Robotics

    Science.gov (United States)

    Bernstein, Debra Lynn

    2010-01-01

    Children have frequent access to technologies such as computers, game systems, and mobile phones (Sefton-Green, 2006). But it is useful to distinguish between engaging with technology as a "consumer" and engaging as a "creator" or designer (Resnick & Rusk, 1996). Children who engage as the former can use technology efficiently, while those who…

  7. Properties of Cross-Rolled Low Alloy White Cast Iron Grinding Ball

    Institute of Scientific and Technical Information of China (English)

    CHANG Li-min; LIU Lin; LIU Jian-hua

    2007-01-01

    The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the means by which they are damaged and characters of the wear surface were analyzed. The results show that high resistance to impact fracture and high abrasiveness can be achieved after appropriate heat treatment at residual rolling temperature. This kind of heat treatment technology has several advantages under low impact and hard abrasive. These results are very useful for determining the optimized heat treatment technology at residual rolling temperatures.

  8. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  9. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Bryan, Tom; MacLeod, Todd; Gagliano, Larry

    2017-01-01

    Any exploration vehicle assembled or Spacecraft placed in LEO or GTO must pass through this debris cloud and survive. Large cross section, low thrust vehicles will spend more time spiraling out through the cloud and will suffer more impacts.Better knowledge of small debris will improve survival odds. Current estimated Density of debris at various orbital attitudes with notation of recent collisions and resulting spikes. Orbital Debris Tracking and Characterization has now been added to NASA Office of Chief Technologists Technology Development Roadmap in Technology Area 5 (TA5.7)[Orbital Debris Tracking and Characterization] and is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crews due to the risk of Orbital Debris damage to ISS Exploration vehicles. The Problem: Traditional orbital trackers looking for small, dim orbital derelicts and debris typically will stare at the stars and let any reflected light off the debris integrate in the imager for seconds, thus creating a streak across the image. The Solution: The Small Tracker will see Stars and other celestial objects rise through its Field of View (FOV) at the rotational rate of its orbit, but the glint off of orbital objects will move through the FOV at different rates and directions. Debris on a head-on collision course (or close) will stay in the FOV at 14 Km per sec. The Small Tracker can track at 60 frames per sec allowing up to 30 fixes before a near-miss pass. A Stereo pair of Small Trackers can provide range data within 5-7 Km for better orbit measurements.

  10. Grinding efficiency improvement of hydraulic cylinders parts for mining equipment

    Directory of Open Access Journals (Sweden)

    Korotkov Aleksandr

    2017-01-01

    Full Text Available The aim of the article is to find out ways to improve parts treatment and components of mining equipment on the example of hydraulic cylinders parts, used as pillars for mine roof supports, and other actuator mechanisms. In the course of the research work methods of machine retaining devices design were used, the scientific approaches for the selection of progressive grinding schemes were applied; theoretical and practical experience in the design and production of new constructions of grinding tools was used. As a result of this work it became possible to create a progressive construction of a machine retaining device for grinding of large parts of hydraulic cylinders, to apply an effective scheme of rotary abrasive treatment, to create and implement new design of grinding tools by means of grains with controllable shape and orientation. Implementation of the results obtained in practice will improve the quality and performance of repairing and manufacturing of mining equipment.

  11. E-Records a Grind for Many Doctors

    Science.gov (United States)

    ... page: https://medlineplus.gov/news/fullstory_160789.html E-Records a Grind for Many Doctors And this ... direct contact with patients and 37 percent on E-health records and other clerical work, the study ...

  12. Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview

    Science.gov (United States)

    Hughes, Stephen J.; Cheatwood, F. McNeil; Calomino, Anthony M.; Wright, Henry S.; Wusk, Mary E.; Hughes, Monica F.

    2013-01-01

    The successful flight of the Inflatable Reentry Vehicle Experiment (IRVE)-3 has further demonstrated the potential value of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This technology development effort is funded by NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). This paper provides an overview of a multi-year HIAD technology development effort, detailing the projects completed to date and the additional testing planned for the future.

  13. Elementary Teachers' Experiences with Technology Professional Development and Using Technology in the Classroom: A Case Study

    Science.gov (United States)

    Grizzle, Pamela Lavon

    2016-01-01

    In order for educators to prepare students for technology-enhanced learning educators must first be prepared. The digital divide and technology professional development are two factors impacting the depth at which technology is integrated into the classroom. The local problem addressed in this study was that the impact of technology professional…

  14. Rapidly removing grinding damage layer on fused silica by inductively coupled plasma processing

    Science.gov (United States)

    Chen, Heng; Zhou, Lin; Xie, Xuhui; Shi, Baolu; Xiong, Haobin

    2016-10-01

    During the conventional optical shaping process of fused silica, lapping is generally used to remove grinding damage layer. But this process is of low efficiency, it cannot meet the demand of large aperture optical components. Therefore, Inductively Coupled Plasma Processing (ICPP) was proposed to remove grinding damage layer instead of lapping. ICPP is a non-contact, deterministic figuring technology performed at atmospheric pressure. The process benefits from its ability to simultaneously remove sub-surface damage (SSD) while imparting the desired figure to the surface with high material remove rate. The removing damage capability of ICPP has preliminarily been confirmed on medium size optical surfaces made of fused silica, meanwhile serious edge warping was found. This paper focused on edge effect and a technique has been designed to compensate for these difficulties. Then it was demonstrated on a large aperture fused silica mirror (Long320mm×Wide370mm×High50mm), the removal depth was 30.2μm and removal rate got 6.6mm3/min. The results indicate that ICPP can rapidly remove damage layer on the fused silica induced by the previous grinding process and edge effect is effective controlled.

  15. Cellulosic ethanol. Potential, technology and development status

    Energy Technology Data Exchange (ETDEWEB)

    Rarbach, M. [Sued-Chemie AG, Muenchen (Germany)

    2012-07-01

    In times of rising oil prices and a growing energy demand, sustainable alternative energy sources are needed. Cellulosic ethanol is a sustainable biofuel, made from lignocellulosic feedstock such as agricultural residues (corn stover, cereal straw, bagasse) or dedicated energy crops. Its production is almost carbon neutral, doesn't compete with food or feed production and induces no land use changes. It constitutes a new energy source using an already existing renewable feedstock without needing any further production capacity and can thus play a major role on the way to more sustainability in transport and the chemical industry and reducing the dependence on the import of fossil resources. The potential for cellulosic ethanol is huge: In the US, the annual production of agricultural residues (cereal straw and corn stover) reached almost 384 million tons in 2009 and Brazil alone produced more than 670 million tons of sugar cane in 2009 yielding more than 100 million tons of bagasse (dry basis). And alone in the European Union, almost 300 million tons of crop straw are produced annually. The last years have seen success in the development and deployment in the field of cellulosic ethanol production. The main challenge thereby remains to demonstrate that the technology is economically feasible for the up-scaling to industrial scale. Clariant has developed the sunliquid {sup registered} process, a proprietary cellulosic ethanol technology that reaches highest greenhouse gas (GHG) emission savings while cutting production costs to a minimum. The sunliquid {sup registered} process for cellulosic ethanol matches the ambitious targets for economically and ecologically sustainable production and greenhouse gas reduction. It was developed using an integrated design concept. Highly optimized, feedstock and process specific biocatalysts and microorganisms ensure a highly efficient process with improved yields and feedstock-driven production costs. Integrated, on

  16. Teeth Grinding: Is Emotional Stability related to Bruxism?

    OpenAIRE

    Sutin, Angelina R; Terracciano, Antonio; Ferrucci, Luigi; Costa, Paul T.

    2010-01-01

    This study examines the association between personality traits and bruxism, the repetitive grinding or clenching of teeth. Community-dwelling participants (N = 470) had a comprehensive oral examination by a dentist and completed a dental history and personality questionnaires. Consistent with the literature on state anxiety and depression as antecedents of bruxism, Neuroticism-related traits were associated with self-reported teeth grinding. These traits were also associated with other oral c...

  17. Performance analysis of magnesium phosphate cement mortar containing grinding dust

    OpenAIRE

    2009-01-01

    Magnesium phosphate cement materials are formed by reacting magnesium oxide with water-soluble phosphates such as monoammonium dihydrogen phosphate (ADP), which solidifies at ambient temperature through the formation of hydrated phases in the material. Cylindrical specimens of magnesium phosphate cement were molded and varying amounts (0 to 30% weight) of grinding dust were added to the ceramic matrices. The influence of the addition of grinding dust on the characteristics of the mortars in t...

  18. Research on controlling grinding cracks of PM pump camShaft%PM泵凸轮轴磨削裂纹控制方法的探讨

    Institute of Scientific and Technical Information of China (English)

    童景琳; 钟莉娟; 王志增

    2011-01-01

    Through analyzing the reasons causing cracking on camshaft of PM pump in grinding process, it pointed that grinding temperature, grinding stress and cooling effect are the main factors influencing grinding cracks. The experiments showed that it can reduce camshaft grinding cracks through controlling carburized layer thickness, normalizing, quenching and tempering technological parameters, and selecting high speed grinding, keeping wheel and cool liquid in good condition.%通过对PM泵凸轮轴磨削过程中产生裂纹的原因进行分析,指出磨削温度、磨削应力及冷却效果是产生磨削裂纹的主要因素.实验表明,通过控制渗碳层厚度及正火、淬火和回火工艺参数,选用高速磨削,保持良好的砂轮和冷却液状态,能够减少凸轮轴磨削裂纹.

  19. Development of CANFLEX fuel fabrication technology

    Energy Technology Data Exchange (ETDEWEB)

    Kang, M. S.; Choi, C. B.; Park, C. H.; Kwon, W. J.; Kim, C. H.; Kim, B. J.; Koo, C. H.; Cho, D. S.; So, D. Y.; Suh, S. W.; Park, C. J.; Chang, D. H.; Yun, S. H. [KEPCO Nuclear Fuel Company, Taejeon (Korea)

    2000-04-01

    Wolsong Unit 1 as the first heavy water reactor in Korea has been in service for 17 years since 1983. It would be about the time to prepare a plan for the solution of problems due to aging of the reactor. The aging of CANDU reactor could lead especially to the steam generator cruding and pressure tube sagging and creep and then decreases the operation margin to make some problems on reactor operations and safety. The counterplan could be made in two ways. One is to repair or modify reactor itself. The other is to develop new advanced fuel to increase of CANDU operation margin effectively, so as to compensate the reduced operation margin. Therefore, the first objectives in the present R and D is to develop the CANFLEX-NU(CANDU Flexible fuelling-Natural Uranium) fuel as a CANDU advanced fuel. One of the improvements in CANDU fuel fabrication technology, and advanced method of Zr-Be brazing was developed. For the formation of Zr-Be alloy, preheating and main heating temperature in the furnace is 700 deg C, 1200 deg C respectively. In order to find an appropriate material for the brazing joints in the CANDU fuel, the composition of Zr based amorphous metals were designed. And, the effect of hydrogen on the mechanical properties of cladding sheath and feasibility of the eddy current test to evaluate quality of end cap weld were also studied for the fundamental research purpose. As a preliminary study to suggest optimal way for the mass production of CANFLEX-NU fuel at KNFC the existing CANDU fuel facilities and fabrication/inspection processes were reviewed. The best way is that the current CANDU facility shall be modified to produce small diametrial CANFLEX elements and a new facility shall be constructed to produce large diametrial CANFLEX fuel elements. 46 refs., 99 figs., 10 tabs. (Author)

  20. High speed technology development and evaluation

    Science.gov (United States)

    Parker, D. R.; Brown, E. R.; Dickson, J. F.

    1986-10-01

    Semiconductor technology suited to high on-board data handling rates was investigated. Very high speed discrete logic and high speed gate arrays; single chip digital signal processors and single chip floating point processing peripherals; and analog CCD technologies and custom designed CCD chips for synthetic aperture radar applications were assessed. The 2 micron CMOS technology is highly reliable, supporting semicustom design techniques. Process JGC, the CCD technology, is highly reliable except for tolerance to ionizing radiation. Reliability of the ECL 16-bit serial-parallel parallel-serial converter junction isolated bipolar process, process WZA, is compromised by a design error and oxide contamination contributing to high leakage levels. The bipolar circuit is tolerant to an ionizing radiation of 20kRad. Step stress environmental testing to 200 C produces no failures in CMOS and CCD technologies, but accelerates the degradation of the oxide contaminated bipolar process. All technologies are susceptible to single event upsets.

  1. Analysis of surface integrity of grinded gears using Barkhausen noise analysis and x-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Vrkoslavová, Lucie; Louda, Petr [Institute for Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec (Czech Republic); Malec, Jiři [Department of Analytic Services, PCS s.r.o. (Czech Republic)

    2014-02-18

    The contribution is focused to present results of study grinded gears made of 18CrNiMo7-6 steel used in the wind power plant for support (service) purposes. These gears were case-hardened due to standard hard case and soft core formation. This heat treatment increases wear resistance and fatigue strength of machine parts. During serial production some troubles with surface integrity have occurred. When solving complex problems lots of samples were prepared. For grinding of gears were used different parameters of cutting speed, number of material removal and lots from different subsuppliers. Material characterization was carried out using Barkhausen noise analysis (BNA) device; X-ray diffraction (XRD) measurement of surface residual stresses was done as well. Depth profile of measured characteristics, e.g. magnetoelastic parameter and residual stress was obtained by step by step layers' removing using electrolytic etching. BNA software Viewscan was used to measure magnetizing frequency sweep (MFS) and magnetizing voltage sweep (MVS). Scanning of Magnetoelastic parameter (MP) endwise individual teeth were also carried out with Viewscan. These measurements were done to find problematic surface areas after grinding such as thermal damaged locations. Plots of the hardness and thickness of case-hardened layer on cross sections were measurered as well. Evaluation of structure of subsurface case-hardened layer and core was made on etched metallographic patterns. The aim of performed measurements was to find correlation between conditions of grinding, residual stresses and structural and magnetoelastic parameters. Based on correlation of measured values and technological parameters optimizing the production of gears will be done.

  2. Analysis of surface integrity of grinded gears using Barkhausen noise analysis and x-ray diffraction

    Science.gov (United States)

    Vrkoslavová, Lucie; Louda, Petr; Malec, Jiři

    2014-02-01

    The contribution is focused to present results of study grinded gears made of 18CrNiMo7-6 steel used in the wind power plant for support (service) purposes. These gears were case-hardened due to standard hard case and soft core formation. This heat treatment increases wear resistance and fatigue strength of machine parts. During serial production some troubles with surface integrity have occurred. When solving complex problems lots of samples were prepared. For grinding of gears were used different parameters of cutting speed, number of material removal and lots from different subsuppliers. Material characterization was carried out using Barkhausen noise analysis (BNA) device; X-ray diffraction (XRD) measurement of surface residual stresses was done as well. Depth profile of measured characteristics, e.g. magnetoelastic parameter and residual stress was obtained by step by step layers' removing using electrolytic etching. BNA software Viewscan was used to measure magnetizing frequency sweep (MFS) and magnetizing voltage sweep (MVS). Scanning of Magnetoelastic parameter (MP) endwise individual teeth were also carried out with Viewscan. These measurements were done to find problematic surface areas after grinding such as thermal damaged locations. Plots of the hardness and thickness of case-hardened layer on cross sections were measurered as well. Evaluation of structure of subsurface case-hardened layer and core was made on etched metallographic patterns. The aim of performed measurements was to find correlation between conditions of grinding, residual stresses and structural and magnetoelastic parameters. Based on correlation of measured values and technological parameters optimizing the production of gears will be done.

  3. 湿法超微粉碎和水煎煮提取法对鼠妇蛋白溶栓抗凝活性的影响及机制初探%Comparison of Thrombolytic and Anticoagulant Activities of Proteins of Porcellio scaber Latreille Extracted by Wet Superfine Grinding Technology and Water Decoction and Exploration of Their Mechanisms

    Institute of Scientific and Technical Information of China (English)

    田周; 李博; 郭立玮; 吴勉华; 程海波; 朱华旭

    2015-01-01

    Objective To compare the active thrombolytic and anticoagulant proteins of Porcellio scaber Latreille extracted by wet superfine grinding technology and water decoction,and to study their thrombolytic and anticoagulant mechanisms. Methods We compared the difference of the yield of extract and the protein content extracted by wet superfine grinding technology and water decoction. Fractional precipitation method with ammonium sulfate was applied to purify the active proteins. The fibrinolysis activity and the mode of fibrinolyctia action of the active proteins were measured by agarose-fibrin plate. Moreover,prothrombin time(PT),thrombin time(TT),activated partial thromboplastin time(APTT)were measured by the automatic blood agglutination instrument. The effect of temperature on the obtained active proteins was also investigated. Results There were great differences in the yield of extract and the protein content extracted by water decoction and ultra-fine pulverization in wet processing. The extract obtained by water decoction had no thrombolytic activity,but the extract obtained by ultra-fine pulverization in wet processing could stimulate the secretion of plasminogen activator and dissolve fibrin. Besides,at the range of saturation from 60%to 80%,the active proteins extract obtained by wet ultra-fine pulverization had the higher thrombolytic activity;they could also delay APTT and TT,but had no effect on PT. However, the protein extracted by water decoction had no effect on TT, PT, and APTT. Conclusion The wet superfine grinding technology can maintain maximally the active components of Porcellio scaber Latreille,and the active proteins have obvious thrombolytic activity and anticoagulant function. However,the proteins obtained by water decoction have no thrombolytic and anticoagulant activities.%目的:比较湿法超微粉碎及水煎煮提取法对鼠妇溶栓抗凝活性蛋白的影响,并探究其溶栓抗凝活性的机理。方法比较两种不同提

  4. Technology and International Development: New Directions Needed

    Science.gov (United States)

    Morgan, Robert P.

    1977-01-01

    Examines many aspects of the United States' policies toward supplying technology to underdeveloped nations. Advances arguments which the author believes should be considered in future policy formation. (CP)

  5. Technology Development Roadmap: A Technology Development Roadmap for a Future Gravitational Wave Mission

    Science.gov (United States)

    Camp, Jordan; Conklin, John; Livas, Jeffrey; Klipstein, William; McKenzie, Kirk; Mueller, Guido; Mueller, Juergen; Thorpe, James Ira; Arsenovic, Peter; Baker, John; Bender, Peter; Brinker, Edward; Crow, John; Spero, Robert; deVine Glenn; Ziemer, John

    2013-01-01

    Humankind will detect the first gravitational wave (GW) signals from the Universe in the current decade using ground-based detectors. But the richest trove of astrophysical information lies at lower frequencies in the spectrum only accessible from space. Signals are expected from merging massive black holes throughout cosmic history, from compact stellar remnants orbiting central galactic engines from thousands of close contact binary systems in the Milky Way, and possibly from exotic sources, some not yet imagined. These signals carry essential information not available from electromagnetic observations, and which can be extracted with extraordinary accuracy. For 20 years, NASA, the European Space Agency (ESA), and an international research community have put considerable effort into developing concepts and technologies for a GW mission. Both the 2000 and 2010 decadal surveys endorsed the science and mission concept of the Laser Interferometer Space Antenna (LISA). A partnership of the two agencies defined and analyzed the concept for a decade. The agencies partnered on LISA Pathfinder (LPF), and ESA-led technology demonstration mission, now preparing for a 2015 launch. Extensive technology development has been carried out on the ground. Currently, the evolved Laser Interferometer Space Antenna (eLISA) concept, a LISA-like concept with only two measurement arms, is competing for ESA's L2 opportunity. NASA's Astrophysics Division seeks to be a junior partner if eLISA is selected. If eLISA is not selected, then a LISA-like mission will be a strong contender in the 2020 decadal survey. This Technology Development Roadmap (TDR) builds on the LISA concept development, the LPF technology development, and the U.S. and European ground-based technology development. The eLISA architecture and the architecture of the Mid-sized Space-based Gravitational-wave Observatory (SGO Mid)-a competitive design with three measurement arms from the recent design study for a NASA

  6. Development and application of titanium alloy casting technology in China

    Institute of Scientific and Technical Information of China (English)

    NAN Hai; XIE Cheng-mu; ZHAO Jia-qi

    2005-01-01

    The development and research of titanium cast alloy and its casting technology, especially its application inaeronautical industry in China are presented. The technology of molding, melting and casting of titanium alloy, casting quality control are introduced. The existing problems and development trend in titanium alloy casting technology are also discussed.

  7. Development of the destruction technology for radioactive organic solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Park, H.S.; Lee, K.W. [and others

    1999-04-01

    The followings were studied through the project entitled 'Technology development for nuclear fuel cycle waste treatment'. 1. Organic waste decomposition technology development A. Destruction technology for organic wastes using Ag(2)-mediated electrochemical oxidation B. Recovery and regeneration technology for the spent chemicals used in the MEO process 2. Radioactive metal waste recycling technology A. Surface decontamination processes B. Decontamination waste treatment technology 3. Volume reduction technology nuclear fuel cycle (NFC) technology A. Estimation of the amount of radwastes and the optimum volume reduction methodology of domestic NFC B. Pretreatment of spent fuel cladding by electrochemical decontamination C. Hot cell process technology for the treatment of NFC wastes 4. Design and fabrication of the test equipment of volume reduction and reuse of alpha contaminated wastes 5. Evaluation on environmental compatibility of NFC A. Development of evaluation methodology on environmental friendliness of NFC B. Residual activity assessment of recycling wastes. (author). 321 refs., 54 tabs., 183 figs.

  8. BNCT Technology Development on HANARO Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Ki Jung; Park, Kyung Bae; Whang, Seung Ryul; Kim, Myong Seop

    2007-06-15

    So as to establish the biological effects of BNCT in the HANARO Reactor, biological damages in cells and animals with treatment of boron/neutron were investigated. And 124I-BPA animal PET image, analysis technology of the boron contents in the mouse tissues by ICP-AES was established. A Standard clinical protocol, a toxicity evaluation report and an efficacy investigation report of BNCT has been developed. Based on these data, the primary permission of clinical application was acquired through IRB of our hospital. Three cases of pre-clinical experiment for boron distribution and two cases of medium-sized animal simulation experiment using cat with verifying for 2 months after BNCT was performed and so the clinical demonstration with a patient was prepared. Also neutron flux, fast neutron flux and gamma ray dose of BNCT facility were calculated and these data will be utilized good informations for clinical trials and further BNCT research. For the new synthesis of a boron compound, o-carboranyl ethylamine, o-carboranylenepiperidine, o-carboranyl-THIQ and o-carboranyl-s-triazine derivatives were synthesized. Among them, boron uptake in the cancer cell of the triazine derivative was about 25 times than that of BPA and so these three synthesized methods of new boron compounds were patented.

  9. New developments in surface technology and prototyping

    Science.gov (United States)

    Himmer, Thomas; Beyer, Eckhard

    2003-03-01

    Novel lightweight applications in the automotive and aircraft industries require advanced materials and techniques for surface protection as well as direct and rapid manufacturing of the related components and tools. The manufacturing processes presented in this paper are based on multiple additive and subtractive technologies such as laser cutting, laser welding, direct laser metal deposition, laser/plasma hybrid spraying technique or CNC milling. The process chain is similar to layer-based Rapid Prototyping Techniques. In the first step, the 3D CAD geometry is sliced into layers by a specially developed software. These slices are cut by high speed laser cutting and then joined together. In this way laminated tools or parts are built. To improve surface quality and to increase wear resistance a CNC machining center is used. The system consists of a CNC milling machine, in which a 3 kW Nd:YAG laser, a coaxial powder nozzle and a digitizing system are integrated. Using a new laser/plasma hybrid spraying technique, coatings can be deposited onto parts for surface protection. The layers show a low porosity and high adhesion strength, the thickness is up to 0.3 mm, and the lower effort for preliminary surface preparation reduces time and costs of the whole process.

  10. Development of beam utilization/application technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B. H.; Kim, Y.K.; Song, T.Y. [and others

    1999-05-01

    High power proton accelerator is considered as one of national fundamental research facilities and a key to advanced nuclear technology development, having been widely used in an un detachable relationship with nuclear research in advanced countries. The high power proton accelerator will be installed in several phases as an up front facility of the nuclear waste transmutation system. It is expected that a common understanding and a general agreement over proper utilization of the accelerator should be deduced and that a user program for beam utilization and application should be firmly established in time for the completion of each phase of the accelerator. This high power proton accelerator will consist of several component accelerators and, from up front, accelerators such as injector, RFQ, CCDTL, etc. will be installed in sequence and deliver respectively at each stage beams of 3MeV, 20MeV, 100Mev, etc. to be variously utilized forindustries, defence industry, medical treatment, environmental protection and basic science research. In order for the accelerator to be fully utilized as a national fundamental research facility beyond nuclear field, it is necessary to formulate a proceeding plan of the user program for the accelerator and to cultivate industrial utilization/application studies of proton beams accelerated by injector or RFQ of the accelerator. (author). 38 refs., 84 tabs., 39 figs.

  11. Simulation of Flow and Heat Transfer of Mist/Air Impinging Jet on Grinding Work-Piece

    Directory of Open Access Journals (Sweden)

    Fan Jiang

    2016-01-01

    Full Text Available The numerical investigation is presented for flow and heat transfer on grinding work-piece with mist/air impinging jet by using DPM (discrete phase model model. The tracks of the mist droplets show most of them are accumulated on the right surface of grinding zone, and can be influenced by the rotating speed of the grinding wheel, the position and the number of the jet nozzle. The mechanism model of enhance cooling by mist/air impinging jet is developed, which indicated the mist droplet is an key factor of affecting the heat transfer coefficient, and the increasing of mist droplet leads to significant enhancement of the cooling effect. The effects of the jet nozzle location, the nozzle diameter, and the nozzle number on flow and heat transfer coefficient are studied. The results show that the less nozzle distance and inclination angle, the greater nozzle diameter and number lead to greater heat transfer coefficient.

  12. Rapid online measurement method for radius of curvature of fine grinding optics based on tool setting system

    Science.gov (United States)

    Dai, Lei; Zhang, Jian; Gu, Yongqiang; Miao, Erlong

    2016-10-01

    The radius of curvature (ROC) is one of the most important parameters of sphere optic components. In optic fine grinding process, radius of curvature accuracy requires up to 0.1%. We propose a method based on high precision CNC grinding machine, develop ROC online measurement method for fine grinding optics. This rapid method only takes few measurement points based on spiral route path, attaining enough accuracy and reduce the time cost, furthermore, can greatly reduce the repeated installation error. Analyzing the uncertainty sources that affect to the ROC measurement results, calculates the combined standard uncertainty 32.8 micron. Completed comparison experiments with CMM, the standard deviation of the experiment result are about 18 micron that approaches to CMM results.

  13. Development beer technology with amaranth flour

    Directory of Open Access Journals (Sweden)

    M. M. Danina

    2016-01-01

    Full Text Available At the present time, the urgent problem is the development of product range of beer and the reduction of production costs. We used amaranth flour: "protein" and "carbohydrate", is designed and experimentally obtained from seeds of amaranth and made available for research "Agros" company (Kaliningrad region. The article discusses the effects of different concentrations of flour on the process of mashing, fermentation and the quality of beer. Prepared in the ratio of light barley malt:amaranth flour 90:10 and 80:20, respectively. Experimental were chosen of mashing barley malt with the addition of flour. The mashing process started with a temperature of 40 or 500C. Cytolytic pause was 30 min, protein-25 min, malt pause was increased up to 30 min. Using 20% of flour in the total grain charge leads to the increase of first wort extract content to 12.2%. By increasing the amount of flour in the grist of grain products increases the saccharification of the mash. The time of saccharification when you make 20% of the "protein" flour and the initial temperature of mashing 500C is 26 minutes, and "carbohydrate" flour -18min., therefore, when developing technology of new beer, from the point of view of reducing the cost of production, it is advisable to use "carbohydrate" amaranth flour in the amount of 20% in the total grain products. We estimated the impact of concentrations used flour on organoleptic indicators of finished beer on a 25 point scale. The aroma of the beer was felt citrus and malt undertones. Total score of beer with 10% amaranth flour is 18 points, and 20% amaranth flour is 20 points.

  14. Recent NASA aerospace medicine technology developments

    Science.gov (United States)

    Jones, W. L.

    1973-01-01

    Areas of life science are being studied to obtain baseline data, strategies, and technology to permit life research in the space environment. The reactions of the cardiovascular system to prolonged weightlessness are also being investigated. Particle deposition in the human lung, independent respiratory support system, food technology, and remotely controlled manipulators are mentioned briefly.

  15. Capture technologies: Improvements and promising developments

    NARCIS (Netherlands)

    Blomen, E.; Hendriks, C.; Neele, F.

    2009-01-01

    In this status report we want to provide a comprehensive overview of the current status and promising technologies of CO2 capture by means of a literature review, in-house knowledge and interviews. We describe the technology, bottlenecks towards implementation and potential use. The results will be

  16. EPA-developed, patented technologies available for licensing

    Data.gov (United States)

    U.S. Environmental Protection Agency — Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be...

  17. The Effect of Physics in the Development of Indigenous Technology ...

    African Journals Online (AJOL)

    FIRST LADY

    An International Multi-Disciplinary Journal , Ethiopia. Vol. ... development of indigenous technology (production of local talking drum and canoe) in Akwa ... made good (indigenous technologies) to conform to modern standards has therefore ...

  18. Modelling architectures in multi-product oriented technology development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir

    This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requiremen...... frameworks in a technology development projectare presented, along with descriptive results on the context of technology development gained through active participation in the case project.......This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requirements...... to be fulfilled are not completely defined.The products to be based on the technology are yet to be developed as the foundation for their development will be developed during the technology development. Furthermore, the production of a new technology is not defined as both the technology and derivative products...

  19. Working Environment and Technological Development - An Introduction

    DEFF Research Database (Denmark)

    Clausen, Christian; Nielsen, Klaus T.

    1997-01-01

    The chapter is concerned with the different departures, research questions, positions and controversies that is identified in the research programme: Working Environment and Technological Environment. The chapter counterposes positions from six different chapters and raises four themes for debate...... and further research. 1) Whast is planning? 2) Organisational change - learning or political processes? 3) Transformations of technology. 4) Strategies for considering working conditions.......The chapter is concerned with the different departures, research questions, positions and controversies that is identified in the research programme: Working Environment and Technological Environment. The chapter counterposes positions from six different chapters and raises four themes for debate...

  20. Effects of grinding-induced grain boundary and interfaces on electrical transportation and structure phase transition in ZnSe under high pressure

    Science.gov (United States)

    Jie, Yang; Pei, Wang; Guo-Zhao, Zhang; Xiao-Xue, Zhou; Jing, Li; Cai-Long, Liu

    2016-06-01

    Interface and scale effects are the two most important factors which strongly affect the structure and the properties of nano-/micro-crystals under pressure. We conduct an experiment under high pressure in situ alternating current impedance to elucidate the effects of interface on the structure and electrical transport behavior of two ZnSe samples with different sizes obtained by physical grinding. The results show that (i) two different-sized ZnSe samples undergo the same phase transitions from zinc blend to cinnabar-type phase and then to rock salt phase; (ii) the structural transition pressure of the 859-nm ZnSe sample is higher than that of the sample of 478 nm, which indicates the strong scale effect. The pressure induced boundary resistance change is obtained by fitting the impedance spectrum, which shows that the boundary conduction dominates the electrical transport behavior of ZnSe in the whole experimental pressure range. By comparing the impedance spectra of two different-sized ZnSe samples at high pressure, we find that the resistance of the 478-nm ZnSe sample is lower than that of the 859-nm sample, which illustrates that the sample with smaller particle size has more defects which are due to physical grinding. Project supported by the National Natural Science Foundation of China (Grant Nos. 11404133 and 11374121) and the Program of Science and Technology Development Plan of Jilin Province, China (Grant No. 20140520105JH).

  1. Information technology research and development critical trends and issues

    CERN Document Server

    1985-01-01

    Information Technology Research and Development: Critical Trends and Issues is a report of the Office of Technology Assessment of the United States Government on the research and development in the area of information technology. The report discusses information technology research and development - its goals, nature, issues, and strategies; environment and its changes; the roles of the participants; and the health of its field. The book then goes on to four selected case studies in information technology: advanced computer architecture; fiber optic communications; software engineering; and ar

  2. Casting Technology Development for SFR Metallic Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.T.; Oh, S.J.; Ryu, H.J.; Kim, K.H.; Lee, Y.S.; Kim, S.K.; Woo, Y.M.; Ko, Y.M.; Lee, C.B. [KAERI, 150 Deokjin-dong, Yuseong, Daejeon, 305-353 (Korea, Republic of)

    2009-06-15

    Fabrication technology of metallic fuel for sodium fast reactor (SFR) is being developed in Korea as a national mid- and long-term nuclear R and D program from 2007. The metallic fuel for SFR should be remotely fabricated under a radiation shielded environment such as a glove box or hot cell, because it contains long-lived minor actinides such as Np, Am and Cm. In order to design a reliable remote fabrication system, various casting techniques have been studied by using U-Zr and U-Zr-RE alloys as surrogate fuel material. Rare earth elements such as Ce or Nd were used as a surrogate for minor actinide elements or solid solution fission products. Macro-scale soundness, microstructures and compositional homogeneity of metallic fuel samples fabricated by vacuum-assisted injection casting, vacuum-assisted gravity casting, centrifugal atomization and continuous casting were compared. Although sound slugs of U-Zr metallic fuel of 4{approx}6 mm in diameter could be fabricated by vacuum-assisted injection casting or vacuum-assisted gravity casting, it was necessary to consider that vaporization of Am and volume of radioactive wastes such as crucibles and molds should be minimized. Effects of casting parameters on the volatile loss, and effects of coatings on the chemical reaction between metallic fuel and molds are discussed. Some methods to reduce the volatile Am loss and waste molds and crucibles will be proposed. Short rods of U-Zr or U-Zr-Ce fuel will be fabricated by the vacuum-assisted gravity casting technique for an irradiation test in the HANARO research reactor from 2010. (authors)

  3. Fuel Cell/Reformers Technology Development

    Science.gov (United States)

    2004-01-01

    NASA Glenn Research Center is interested in developing Solid Oxide Fuel Cell for use in aerospace applications. Solid oxide fuel cell requires hydrogen rich feed stream by converting commercial aviation jet fuel in a fuel processing process. The grantee's primary research activities center on designing and constructing a test facility for evaluating injector concepts to provide optimum feeds to fuel processor; collecting and analyzing literature information on fuel processing and desulfurization technologies; establishing industry and academic contacts in related areas; providing technical support to in-house SOFC-based system studies. Fuel processing is a chemical reaction process that requires efficient delivery of reactants to reactor beds for optimum performance, i.e., high conversion efficiency and maximum hydrogen production, and reliable continuous operation. Feed delivery and vaporization quality can be improved by applying NASA's expertise in combustor injector design. A 10 KWe injector rig has been designed, procured, and constructed to provide a tool to employ laser diagnostic capability to evaluate various injector concepts for fuel processing reactor feed delivery application. This injector rig facility is now undergoing mechanical and system check-out with an anticipated actual operation in July 2004. Multiple injector concepts including impinging jet, venturi mixing, discrete jet, will be tested and evaluated with actual fuel mixture compatible with reforming catalyst requirement. Research activities from September 2002 to the closing of this collaborative agreement have been in the following areas: compiling literature information on jet fuel reforming; conducting autothermal reforming catalyst screening; establishing contacts with other government agencies for collaborative research in jet fuel reforming and desulfurization; providing process design basis for the build-up of injector rig facility and individual injector design.

  4. Systems engineering identification and control of mixed waste technology development

    Energy Technology Data Exchange (ETDEWEB)

    Beitel, G.A.

    1997-08-01

    The Department of Energy (DOE) established the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop technologies required to meet the Department`s commitments for treatment of mixed low-level and transuranic wastes. Waste treatment includes all necessary steps from generation through disposal. Systems engineering was employed to reduce programmatic risk, that is, risk of failure to meet technical commitments within cost and schedule. Customer needs (technology deficiencies) are identified from Site Treatment Plans, Consent Orders, ten year plans, Site Technical Coordinating Groups, Stakeholders, and Site Visits. The Technical Baseline, a prioritized list of technology deficiencies, forms the basis for determining which technology development activities will be supported by the MWFA. Technology Development Requirements Documents are prepared for each technology selected for development. After technologies have been successfully developed and demonstrated, they are documented in a Technology Performance Report. The Technology Performance Reports are available to any of the customers or potential users of the technology, thus closing the loop between problem identification and product development. This systematic approach to technology development and its effectiveness after 3 years is discussed in this paper.

  5. Development of Technology Transfer Economic Growth Metrics

    Science.gov (United States)

    Mastrangelo, Christina M.

    1998-01-01

    The primary objective of this project is to determine the feasibility of producing technology transfer metrics that answer the question: Do NASA/MSFC technical assistance activities impact economic growth? The data for this project resides in a 7800-record database maintained by Tec-Masters, Incorporated. The technology assistance data results from survey responses from companies and individuals who have interacted with NASA via a Technology Transfer Agreement, or TTA. The goal of this project was to determine if the existing data could provide indications of increased wealth. This work demonstrates that there is evidence that companies that used NASA technology transfer have a higher job growth rate than the rest of the economy. It also shows that the jobs being supported are jobs in higher wage SIC codes, and this indicates improvements in personal wealth. Finally, this work suggests that with correct data, the wealth issue may be addressed.

  6. Recent developments in optical neuromodulation technologies

    NARCIS (Netherlands)

    Kos, A.; Loohuis, N.F.; Glennon, J.C.; Celikel, T.; Martens, G.J.M.; Tiesinga, P.H.E.; Aschrafi, A.

    2013-01-01

    The emergence of optogenetics technology facilitated widespread applications for interrogation of complex neural networks, such as activation of specific axonal pathways, previously found impossible with electrical stimulation. Consequently, within the short period of its application in neuroscience

  7. Globalisation, Information Technology, and Economic Development

    OpenAIRE

    Seema Farhat

    1996-01-01

    The decrease in coordination and transaction costs on account of information technology creates more opportunities for firms to make production “footloose”; it allows firms to base different parts of their business in different countries and connect them by real time information networks. The rapid growth in information services is thus facilitating the integrated international production of goods and services. This paper discusses the linkages between information technology and economic glob...

  8. Engineering research, development and technology report

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R T

    1999-02-01

    Nineteen ninety-eight has been a transition year for Engineering, as we have moved from our traditional focus on thrust areas to a more focused approach with research centers. These five new centers of excellence collectively comprise Engineering's Science and Technology program. This publication summarizes our formative year under this new structure. Let me start by talking about the differences between a thrust area and a research center. The thrust area is more informal, combining an important technology with programmatic priorities. In contrast, a research center is directly linked to an Engineering core technology. It is the purer model, for it is more enduring yet has the scope to be able to adapt quickly to evolving programmatic priorities. To put it another way, the mission of a thrust area was often to grow the programs in conjunction with a technology, whereas the task of a research center is to vigorously grow our core technologies. By cultivating each core technology, we in turn enable long-term growth of new programs.

  9. Quenching simulation of steel grinding balls

    Directory of Open Access Journals (Sweden)

    Zapata-Hernández, Oscar

    2015-09-01

    Full Text Available The phase transformations of high carbon steel during quenching and equalizing were modelled using commercial computer packages based on the finite element method and the kinetic transformation of steel. The model was used to predict the temperature and microstructural changes taking place within balls of two different sizes that are used for grinding mineral ores. A good correlation between the temperatures measured by inserted thermocouples and those predicted by the model was obtained after modifying the thermal conductivity of the steel within the temperature domain at which mixed phases are present. The phase transformations predicted were confirmed by metallographic analyses.Las transformaciones de fase en aceros de alto carbono durante su temple y un posterior periodo de estabilización fueron modelizadas por medio del uso de paquetes computacionales basados en el método del elemento finito y de la transformación cinética de los aceros. El modelo se usó para predecir los cambios de temperatura y microestructura que se presentan en bolas de dos diferentes tamaños empleadas en estaciones de molienda de minerales. Se encontró una buena correlación entre las temperaturas medidas mediante la inserción de termopares y aquellas predichas por el modelo una vez que se modificó la conductividad térmica del acero en el intervalo mixto de fases. La predicción de las transformaciones de fase se confirmó a través del análisis metalográfico.

  10. Performance of Cooled Cone Grinding Machine in Cocoa Cake Processing

    Directory of Open Access Journals (Sweden)

    Hendy Firmanto

    2015-08-01

    Full Text Available The process of cocoa paste pressing has a function to separate the fatty component of cocoa from its cake. Cocoa paste is further processed into cocoa powder using grinding machine for cocoa cake. The cooled cone type of cocoa grinding machine is used to solve the problem of plug in the maschine caused by melting of fat in cocoa cake due to hot effect as a result of friction in the grinding machine. Grinding machine of cocoa has conical form of cylinder for grinding and stator wall wrapped by source of cold and closed with jacket wool. Research was conducted at Kaliwining Experimental Garden of Indonesian Coffee and Cocoa Research Institute (ICCRI using cocoa cake containing 26.75% originated from Forastero type of cocoa seed. The capacity and recovery of the machine was influenced by space between rotor cylinder and stator wall. Grinding machine operated at cooling temperature of 25.5oC and space between rotor – stator 0.9 cm and the capacity of 187.5 kg/hour with recovery of 200 mesh cocoa powder as much as 24%. The maximum  power of machine required  was 2.5 kW with efficiency of  energy transfer of 97%. Results of proximate analysis showed that there was no change of protein content, but protein and carbohydrate content increased after processing, i.e. from 5.70% and 59.82% into 5.80% and 61.89% respectively.Key words : cocoa cake, cooling, grinding, cocoa powder 

  11. Development of long-lived radionuclide transmutation technology -Development of long-lived radionuclide handling technology-

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hoh; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Cho, Kyung Tae [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    The final goals of this research are completion of design for construction of wet hot cell and auxiliary facilities, and development of main equipments and technologies for remote operation and near real time monitoring system of radioactivity of solution. This wet hot cell and technology will be used for active test of the radionuclide partitioning process and for fission Mo separation and purification process. And high level radioactive and toxic materials will be treated as the form of solution in this wet hot cell. In this R. and D., the important objectives are (1)to provide safe operation, and (2)to keep radiation exposure to staff as low as practicable, (3)to protect the environment. 34 figs, 22 tabs, 44 refs. (Author).

  12. DETERMINATION AND OPTIMIZATION OF CYLINDRICAL GRINDING PROCESS PARAMETERS USING TAGUCHI METHOD AND REGRESSION ANALYSIS

    Directory of Open Access Journals (Sweden)

    M.Janardhan

    2011-07-01

    Full Text Available Cylindrical grinding is one of the important metal cutting processes used extensively in the finishing operations. Metal removal rate and surface finish are the important out put responses in the production with respect to quantity and quality respectively. The Experiments are conducted on CNC cylindrical grinding machine with L9 Orthogonal array with input machining variables as work speed, feed rate and depth of cut. Empirical models are developed using design of experiments and response surface methodology. The adequacy of thedeveloped model is tested with ANNOVA. The developed model can be used by the different manufacturing firms to select right combination of machining parameters to achieve an optimal metal removal rate (MRR and surface roughness (Ra.The results reveals that feed rate, depth of cut are influences predominantly on the output responses metal removal rate (MRR and surface roughness (Ra.The predicted optimal values for MRR, Ra for Cylindrical grinding process are 62.05 gm/min and 0.816 μm respectively. The results are further confirmed by conducting confirmation experiments.

  13. Application of Ultra-Small Micro Grinding and Micro Milling Tools: Possibilities and Limitations

    Directory of Open Access Journals (Sweden)

    Benjamin Kirsch

    2017-08-01

    Full Text Available Current demands for flexible, individual microstructures in high quality result in high requirements for micro tools. As the tool size defines the minimum structure size, ultra-small tools are needed. To achieve tool diameters of 50 µm and lower, we investigate the complete manufacturing chain of micro machining. From the development of the machine tools and components needed to produce and apply the micro tools, the micro tools themselves, as well as the micro machining processes. Machine tools are developed with the possibility of producing the micro geometry (cutting edge design of micro tools as well as plating processes to produce super abrasive micro grinding tools. Applying these setups, we are able to produce ultra-small micro grinding and micro milling tools with typical diameters of 50 µm and down to 4 µm. However, the application of such tools is very challenging. The article presents possibilities and limitations in manufacturing the micro tools themselves as well as microstructures made with these tools. A special emphasis will be on the influence of the tool substrate in micro milling and grain sizes in micro grinding.

  14. New Modes of Constructive Technology Assessment for Developing Countries

    DEFF Research Database (Denmark)

    Christensen, David; Remmen, Arne

    . Technology assessment helps assess the potential positive or negative impacts following in the wake of introducing a new technology of any conceivable type. It has an overall philosophy of reducing the cost of learning in society’s handling of new technologies, anticipating impacts and feeding these insights...... in influencing technological change. In developing countries, technology assessment has received relatively little attention, but recent developments have expressed a ‘call-to-arms’ to tailor flexible approaches by ensuring the involvement of diverse stakeholders and citizens and continual learning among......An old piece of conventional wisdom warns against unsustainable ‘white elephants’ in any attempts at international transferal, adoption or development of technologies in developing countries. After more than half a century of failed attempts to introduce technologies in such settings mostly through...

  15. Geometrical principium of fewer-axis grinding for large complex optical mirrors

    Institute of Scientific and Technical Information of China (English)

    JIANG; ZhenHua; YIN; YueHong

    2013-01-01

    Ultraprecision grinding is an important approach to efficiently fabricate large complex optical mirrors, and five-axis grinding method is commonly used for ultraprecision grinding. However, this method can hardly meet the high stiffness requirement for grinding large mirror, especially with a diameter over 2 m. Meanwhile, the use of fewer-axis grinding solves this problem, as it reduces the number of the grinder’s axes to improve the rigidity of the system and minimize deformation for hard and brittle materials. But its characteristic of unfixed grinding point which changes with workpiece surface curvature increases geometric complexity and requires a higher geometric shape accuracy of grinding wheel. This paper parameterizes grinding wheel’s geometric shape, reveals the relationship between fewer-axis and five-axis grinding methods from the point of view of the differential geometry, and establishes virtual-axis equivalence principium of feweraxis grinding. A quantitative method to determine grinding wheel’s geometric parameters and its shaft inclination angle is proposed based on the requirements of geometric properties of optical mirror, grinder features and grinding process. Moreover, according to the properties of Gauss curvature of curved surface, the wear law of the toric grinding wheel is found and the surface geometric error distribution due to wear is achieved for fewer-axis grinding. The correctness of the principium and method above are verified through simulations.

  16. Science and technology in the recent development of boron nitride materials

    CERN Document Server

    Fukunaga, O

    2002-01-01

    In this paper, we review recent developments relating to cubic boron nitride (cBN) abrasive grains and sintered cutting tools. The demand for high-speed machining and the ecological benefits of using ferrous materials have led to developments in the area of heavy-duty dry cutting and grinding processes in recent years. Optimization of the process of manufacturing cBN materials is an important issue, both fundamentally and as regards applications. We review recent developments in cBN applications and discuss the challenges arising from new processes encountered in basic cBN study at high pressure and high temperature.

  17. Technology Integration for Instructional Improvement: The Impact of Professional Development

    Science.gov (United States)

    Potter, Stephanie L.; Rockinson-Szapkiw, Amanda J.

    2012-01-01

    Technology purchased for use in the classroom often goes unused. We identify a primary reason for the lack of technology integration as ineffectively developed professional development opportunities for teachers. Then we recommend a sustained, administrative-supported and mentor-supported approach to professional development as an alternative to…

  18. Digital Mock-up Technology in Product Development and Research

    Institute of Scientific and Technical Information of China (English)

    CHEN Xu; ZHANG Pandeng; YANG Cheng; XU Zhongming

    2006-01-01

    After introducing the present status of digital mock-up (DMU) technology in product development and research, the modeling and its key technologies in product design are described. The architecture of digital design platform system for main DMU model is developed. Based on the architecture, a method of skeleton design has been applied to the development of digital design system.

  19. The Tipping Points of Technology Development

    Directory of Open Access Journals (Sweden)

    Tauno Kekäle

    2014-07-01

    Full Text Available The tipping point, the decisive point in time in the competition between old and new, is an interesting phenomenon in physics of today. This aspect in technology acceptance is connected to many business decisions such as technology investments, product releases, resource allocation, sales forecasts and, ultimately, affects the profitability and even survival of a company. The tipping point itself is based on many stochastic and dynamic variables, and the process may at least partly be described as path-dependent. This paper analyses the tipping point from three aspects: (1 product performance, (2 features of the market and infrastructure (including related technologies and human network externalities, and (3 actions of the incumbents (including customer lock-in, systems lock-in, and sustaining innovation. The paper is based on the Bass s-curve idea and the technology trajectory concept proposed by Dosi. Three illustrative cases are presented to make the point of the multiple factors affecting technology acceptance and, thus, the tipping point. The paper also suggests outlines for further research in field of computer simulation.

  20. A short guide to technology development in cell biology

    NARCIS (Netherlands)

    B. van Steensel (Bas)

    2015-01-01

    textabstractNew technologies drive progress in many research fields, including cell biology. Much of technological innovation comes from "bottom-up" efforts by individual students and postdocs. However, technology development can be challenging, and a successful outcome depends on many factors. This