WorldWideScience

Sample records for grid coverage development

  1. National electricity planning in settings with low pre-existing grid coverage: Development of a spatial model and case study of Kenya

    Parshall, Lily; Pillai, Dana; Mohan, Shashank; Sanoh, Aly; Modi, Vijay

    2009-01-01

    We develop a spatial electricity planning model to guide grid expansion in countries with low pre-existing electricity coverage. The model can be used to rapidly estimate connection costs and compare different regions and communities. Inputs that are modeled include electricity demand, costs, and geographic characteristics. The spatial nature of the model permits accurate representation of the existing electricity network and population distribution, which form the basis for future expansion decisions. The methodology and model assumptions are illustrated using country-specific data from Kenya. Results show that under most geographic conditions, extension of the national grid is less costly than off-grid options. Based on realistic penetration rates for Kenya, we estimate an average connection cost of $1900 per household, with lower-cost connection opportunities around major cities and in denser rural regions. In areas with an adequate pre-existing medium-voltage backbone, we estimate that over 30% of households could be connected for less than $1000 per connection through infilling. The penetration rate, an exogenous factor chosen by electricity planners, is found to have a large effect on household connection costs, often outweighing socio-economic and spatial factors such as inter-household distance, per-household demand, and proximity to the national grid.

  2. Camera Coverage Estimation Based on Multistage Grid Subdivision

    Meizhen Wang

    2017-04-01

    Full Text Available Visual coverage is one of the most important quality indexes for depicting the usability of an individual camera or camera network. It is the basis for camera network deployment, placement, coverage-enhancement, planning, etc. Precision and efficiency are critical influences on applications, especially those involving several cameras. This paper proposes a new method to efficiently estimate superior camera coverage. First, the geographic area that is covered by the camera and its minimum bounding rectangle (MBR without considering obstacles is computed using the camera parameters. Second, the MBR is divided into grids using the initial grid size. The status of the four corners of each grid is estimated by a line of sight (LOS algorithm. If the camera, considering obstacles, covers a corner, the status is represented by 1, otherwise by 0. Consequently, the status of a grid can be represented by a code that is a combination of 0s or 1s. If the code is not homogeneous (not four 0s or four 1s, the grid will be divided into four sub-grids until the sub-grids are divided into a specific maximum level or their codes are homogeneous. Finally, after performing the process above, total camera coverage is estimated according to the size and status of all grids. Experimental results illustrate that the proposed method’s accuracy is determined by the method that divided the coverage area into the smallest grids at the maximum level, while its efficacy is closer to the method that divided the coverage area into the initial grids. It considers both efficiency and accuracy. The initial grid size and maximum level are two critical influences on the proposed method, which can be determined by weighing efficiency and accuracy.

  3. Development of a Smart Grid Simulation Environment

    Delamare, J; Bitachon, B.; Peng, Z.; Wang, Y.; Haverkort, Boudewijn R.H.M.; Jongerden, M.R.

    2015-01-01

    With the increased integration of renewable energy sources the interaction between energy producers and consumers has become a bi-directional exchange. Therefore, the electrical grid must be adapted into a smart grid which effectively regulates this two-way interaction. With the aid of simulation, stakeholders can obtain information on how to properly develop and control the smart grid. In this paper, we present the development of an integrated smart grid simulation model, using the Anylogic ...

  4. Southampton uni's computer whizzes develop "mini" grid

    Sherriff, Lucy

    2006-01-01

    "In a bid to help its students explore the potential of grid computing, the University of Southampton's Computer Science department has developed what it calls a "lightweight grid". The system has been designed to allow students to experiment with grid technology without the complexity of inherent security concerns of the real thing. (1 page)

  5. Smart grid applications and developments

    Mah, Daphne; Li, Victor OK; Balme, Richard

    2014-01-01

    Meeting today's energy and climate challenges require not only technological advancement but also a good understanding of stakeholders' perceptions, political sensitivity, well-informed policy analyses and innovative interdisciplinary solutions. This book will fill this gap. This is an interdisciplinary informative book to provide a holistic and integrated understanding of the technology-stakeholder-policy interactions of smart grid technologies. The unique features of the book include the following: (a) interdisciplinary approach - by bringing in the policy dimensions to smart grid technologi

  6. Developing maturity grids for assessing organisational capabilities

    Maier, Anja; Moultrie, James; Clarkson, P John

    2009-01-01

    Keyword: Maturity Model,Maturity Grid,Maturity Matrix,Organisational Capabilities,Benchmarking,New Product Development,Perfirmance Assessment......Keyword: Maturity Model,Maturity Grid,Maturity Matrix,Organisational Capabilities,Benchmarking,New Product Development,Perfirmance Assessment...

  7. Macedonian transmission grid capability and development

    Naumoski, K.; Achkoska, E.; Paunoski, A.

    2015-01-01

    The main task of the transmission grid is to guarantee evacuation of electricity from production facilities and, at the same time, supply the electricity to all customers, in a secure, reliable and qualitative manner. During the last years, transmission grid goes through the period of fast and important development, as a result of implementation of renewable and new technologies and creation of internal European electricity market. Due to these reasons, capacity of the existing grid needs to be upgraded either with optimization of existing infrastructure or constructing the new transmission projects. Among the various solutions for strengthening the grid, the one with the minimal investment expenses for construction is selected. While planning the national transmission grid, MEPSO planners apply multi-scenarios analyses, in order to handle all uncertainties, particularly in the forecasts on loads, production and exchange of electricity, location and size of the new power plants, hydrological conditions, integration of renewable sources and the evolution of the electricity market. Visions for development of European transmission grid are also considered. Special attention in the development plan is paid to modelling of power systems in the region of South-Eastern Europe and covering a wider area of the regional transmission grid with simulations of various market transactions. Macedonian transmission grid is developed to satisfy all requirements for electricity production/supply and transits, irrespective which scenario will be realized on long-term basis. Transmission development plan gives the road map for grid evolution from short-term and mid-term period towards long-term horizons (15-20 years ahead). While creating long-term visions, a big challenge in front of transmission planners is implementation of NPP. The paper gives overview of the planning process of Macedonian transmission grid,comprising: definition of scenarios,planning methodology and assessment of

  8. Development of a smart DC grid model

    Dalimunthe, Amty Ma’rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made, E-mail: imadejoni@phys.unpad.ac.id [Lab. of Instrumentation System and Functional Material Processing, Physics Department, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang KM21, Jatinangor 45363, Jawa Barat (Indonesia)

    2016-03-11

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become ‘smart’. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  9. Development of a smart DC grid model

    Dalimunthe, Amty Ma’rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made

    2016-01-01

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become ‘smart’. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  10. Development of a High Performance Spacer Grid

    Song, Kee Nam; Song, K. N.; Yoon, K. H. (and others)

    2007-03-15

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 18 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates 16 are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models.

  11. A Bayesian spatial assimilation scheme for snow coverage observations in a gridded snow model

    S. Kolberg

    2006-01-01

    Full Text Available A method for assimilating remotely sensed snow covered area (SCA into the snow subroutine of a grid distributed precipitation-runoff model (PRM is presented. The PRM is assumed to simulate the snow state in each grid cell by a snow depletion curve (SDC, which relates that cell's SCA to its snow cover mass balance. The assimilation is based on Bayes' theorem, which requires a joint prior distribution of the SDC variables in all the grid cells. In this paper we propose a spatial model for this prior distribution, and include similarities and dependencies among the grid cells. Used to represent the PRM simulated snow cover state, our joint prior model regards two elevation gradients and a degree-day factor as global variables, rather than describing their effect separately for each cell. This transformation results in smooth normalised surfaces for the two related mass balance variables, supporting a strong inter-cell dependency in their joint prior model. The global features and spatial interdependency in the prior model cause each SCA observation to provide information for many grid cells. The spatial approach similarly facilitates the utilisation of observed discharge. Assimilation of SCA data using the proposed spatial model is evaluated in a 2400 km2 mountainous region in central Norway (61° N, 9° E, based on two Landsat 7 ETM+ images generalized to 1 km2 resolution. An image acquired on 11 May, a week before the peak flood, removes 78% of the variance in the remaining snow storage. Even an image from 4 May, less than a week after the melt onset, reduces this variance by 53%. These results are largely improved compared to a cell-by-cell independent assimilation routine previously reported. Including observed discharge in the updating information improves the 4 May results, but has weak effect on 11 May. Estimated elevation gradients are shown to be sensitive to informational deficits occurring at high altitude, where snowmelt has not started

  12. Developing a grid infrastructure in Cuba

    Lopez Aldama, D.; Dominguez, M.; Ricardo, H.; Gonzalez, A.; Nolasco, E.; Fernandez, E.; Fernandez, M.; Sanchez, M.; Suarez, F.; Nodarse, F.; Moreno, N.; Aguilera, L.

    2007-07-01

    A grid infrastructure was deployed at Centro de Gestion de la Informacion y Desarrollo de la Energia (CUBAENERGIA) in the frame of EELA project and of a national initiative for developing a Cuban Network for Science. A stand-alone model was adopted to overcome connectivity limitations. The e-infrastructure is based on gLite-3.0 middleware and is fully compatible with EELA-infrastructure. Afterwards, the work was focused on grid applications. The application GATE was deployed from the early beginning for biomedical users. Further, two applications were deployed on the local grid infrastructure: MOODLE for e-learning and AERMOD for assessment of local dispersion of atmospheric pollutants. Additionally, our local grid infrastructure was made interoperable with a Java based distributed system for bioinformatics calculations. This experience could be considered as a suitable approach for national networks with weak Internet connections. (Author)

  13. Coverage map of gridded multibeam and lidar bathymetry of the US Territory of Guam

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded multibeam bathymetry is integrated with gridded lidar bathymetry. Gridded (5 m cell size) multibeam bathymetry were collected aboard NOAA Ship Hiialaka'i and...

  14. A Development of Lightweight Grid Interface

    Iwai, G; Kawai, Y; Sasaki, T; Watase, Y

    2011-01-01

    In order to help a rapid development of Grid/Cloud aware applications, we have developed API to abstract the distributed computing infrastructures based on SAGA (A Simple API for Grid Applications). SAGA, which is standardized in the OGF (Open Grid Forum), defines API specifications to access distributed computing infrastructures, such as Grid, Cloud and local computing resources. The Universal Grid API (UGAPI), which is a set of command line interfaces (CLI) and APIs, aims to offer simpler API to combine several SAGA interfaces with richer functionalities. These CLIs of the UGAPI offer typical functionalities required by end users for job management and file access to the different distributed computing infrastructures as well as local computing resources. We have also built a web interface for the particle therapy simulation and demonstrated the large scale calculation using the different infrastructures at the same time. In this paper, we would like to present how the web interface based on UGAPI and SAGA achieve more efficient utilization of computing resources over the different infrastructures with technical details and practical experiences.

  15. Smart Grid Development: Multinational Demo Project Analysis

    Oleinikova I.

    2016-12-01

    Full Text Available This paper analyses demand side management (DSM projects and stakeholders’ experience with the aim to develop, promote and adapt smart grid tehnologies in Latvia. The research aims at identifying possible system service posibilites, including demand response (DR and determining the appropriate market design for such type of services to be implemented at the Baltic power system level, with the cooperation of distribution system operator (DSO and transmission system operator (TSO. This paper is prepared as an extract from the global smart grid best practices, smart solutions and business models.

  16. Smart Grid Development: Multinational Demo Project Analysis

    Oleinikova, I.; Mutule, A.; Obushevs, A.; Antoskovs, N.

    2016-12-01

    This paper analyses demand side management (DSM) projects and stakeholders' experience with the aim to develop, promote and adapt smart grid tehnologies in Latvia. The research aims at identifying possible system service posibilites, including demand response (DR) and determining the appropriate market design for such type of services to be implemented at the Baltic power system level, with the cooperation of distribution system operator (DSO) and transmission system operator (TSO). This paper is prepared as an extract from the global smart grid best practices, smart solutions and business models.

  17. QBCov: A Linked Data interface for Discrete Global Grid Systems, a new approach to delivering coverage data on the web

    Zhang, Z.; Toyer, S.; Brizhinev, D.; Ledger, M.; Taylor, K.; Purss, M. B. J.

    2016-12-01

    We are witnessing a rapid proliferation of geoscientific and geospatial data from an increasing variety of sensors and sensor networks. This data presents great opportunities to resolve cross-disciplinary problems. However, working with it often requires an understanding of file formats and protocols seldom used outside of scientific computing, potentially limiting the data's value to other disciplines. In this paper, we present a new approach to serving satellite coverage data on the web, which improves ease-of-access using the principles of linked data. Linked data adapts the concepts and protocols of the human-readable web to machine-readable data; the number of developers familiar with web technologies makes linked data a natural choice for bringing coverages to a wider audience. Our approach to using linked data also makes it possible to efficiently service high-level SPARQL queries: for example, "Retrieve all Landsat ETM+ observations of San Francisco between July and August 2016" can easily be encoded in a single query. We validate the new approach, which we call QBCov, with a reference implementation of the entire stack, including a simple web-based client for interacting with Landsat observations. In addition to demonstrating the utility of linked data for publishing coverages, we investigate the heretofore unexplored relationship between Discrete Global Grid Systems (DGGS) and linked data. Our conclusions are informed by the aforementioned reference implementation of QBCov, which is backed by a hierarchical file format designed around the rHEALPix DGGS. Not only does the choice of a DGGS-based representation provide an efficient mechanism for accessing large coverages at multiple scales, but the ability of DGGS to produce persistent, unique identifiers for spatial regions is especially valuable in a linked data context. This suggests that DGGS has an important role to play in creating sustainable and scalable linked data infrastructures. QBCov is being

  18. Market aspects of smart power grids development

    Maciej Makowski

    2012-03-01

    Full Text Available Smart Grids herald a revolution in the power sector. The centralized and passive power grid model known for over a century is before our very eyes assuming a completely brand new shape: of an active and dynamic network with an increasingly relevant role of consumers – prosumers, who are offered brand new products and services. Such an active development is possible due to a number of factors, such as: 1. Synergy of ICT with power engineering – these disciplines are becoming an indispensable element of the modern power grid’s operation, 2. The European Union’s regulations in the area of reduction of CO2 emission and improved energy efficiency, as well as identification of Smart Grids as one of the optimum tools, 3. Growth, thanks to continuously increasing expenditures, public awareness of the purchase and rational use of energy. However, the Smart Grid development and ICT implementation in the power sector also carry a risk in the matter of setting up system and process links between the systems of concerned energy market players, which should be mitigated by development of technical standards, methods and principles of good cooperation between the concerned parties. Mitigation of the risk, and as a consequence, effective Smart Grids development will provide conditions for dynamic development of new roles and mechanisms on the energy market. Offering modern products and services to consumers and prosumers, and effective implementation on a national scale of demand management mechanisms will be a source of multidimensional benefits of a functional and financial nature, and will also have a positive impact on the National Lower Grid’s security.

  19. Coverage Improvement for Wireless Sensor Networks using Grid Quorum based Node Mobility

    Mathur, Prateek; Nielsen, Rasmus Hjorth; Prasad, Neeli R.

    2012-01-01

    Coverage of wireless sensor networks (WSNs) is an important quality of service (QoS) metric and often the desired coverage is not attainable at the initial deployment, but node mobility can be used to improve the coverage by relocating sensor nodes. Unconstrained node mobility is considered infea...

  20. Smart Grid Development: Multinational Demo Project Analysis

    Oleinikova I.; Mutule A.; Obushevs A.; Antoskovs N.

    2016-01-01

    This paper analyses demand side management (DSM) projects and stakeholders’ experience with the aim to develop, promote and adapt smart grid tehnologies in Latvia. The research aims at identifying possible system service posibilites, including demand response (DR) and determining the appropriate market design for such type of services to be implemented at the Baltic power system level, with the cooperation of distribution system operator (DSO) and transmission system operator (TSO). This pape...

  1. Grid and Cloud for Developing Countries

    Petitdidier, Monique

    2014-05-01

    The European Grid e-infrastructure has shown the capacity to connect geographically distributed heterogeneous compute resources in a secure way taking advantages of a robust and fast REN (Research and Education Network). In many countries like in Africa the first step has been to implement a REN and regional organizations like Ubuntunet, WACREN or ASREN to coordinate the development, improvement of the network and its interconnection. The Internet connections are still exploding in those countries. The second step has been to fill up compute needs of the scientists. Even if many of them have their own multi-core or not laptops for more and more applications it is not enough because they have to face intensive computing due to the large amount of data to be processed and/or complex codes. So far one solution has been to go abroad in Europe or in America to run large applications or not to participate to international communities. The Grid is very attractive to connect geographically-distributed heterogeneous resources, aggregate new ones and create new sites on the REN with a secure access. All the users have the same servicers even if they have no resources in their institute. With faster and more robust internet they will be able to take advantage of the European Grid. There are different initiatives to provide resources and training like UNESCO/HP Brain Gain initiative, EUMEDGrid, ..Nowadays Cloud becomes very attractive and they start to be developed in some countries. In this talk challenges for those countries to implement such e-infrastructures, to develop in parallel scientific and technical research and education in the new technologies will be presented illustrated by examples.

  2. Smart grids opportunities, developments, and trends

    Ali, A B M Shawkat

    2013-01-01

    This book provides up to date knowledge, research results, and innovations in smart grids spanning design, implementation, analysis and evaluation of smart grid solutions to the challenging problems in all areas of the power industry.

  3. Grid accounting service: state and future development

    Levshina, T; Sehgal, C; Bockelman, B; Weitzel, D; Guru, A

    2014-01-01

    During the last decade, large-scale federated distributed infrastructures have been continually developed and expanded. One of the crucial components of a cyber-infrastructure is an accounting service that collects data related to resource utilization and identity of users using resources. The accounting service is important for verifying pledged resource allocation per particular groups and users, providing reports for funding agencies and resource providers, and understanding hardware provisioning requirements. It can also be used for end-to-end troubleshooting as well as billing purposes. In this work we describe Gratia, a federated accounting service jointly developed at Fermilab and Holland Computing Center at University of Nebraska-Lincoln. The Open Science Grid, Fermilab, HCC, and several other institutions have used Gratia in production for several years. The current development activities include expanding Virtual Machines provisioning information, XSEDE allocation usage accounting, and Campus Grids resource utilization. We also identify the direction of future work: improvement and expansion of Cloud accounting, persistent and elastic storage space allocation, and the incorporation of WAN and LAN network metrics.

  4. Grid accounting service: state and future development

    Levshina, T.; Sehgal, C.; Bockelman, B.; Weitzel, D.; Guru, A.

    2014-06-01

    During the last decade, large-scale federated distributed infrastructures have been continually developed and expanded. One of the crucial components of a cyber-infrastructure is an accounting service that collects data related to resource utilization and identity of users using resources. The accounting service is important for verifying pledged resource allocation per particular groups and users, providing reports for funding agencies and resource providers, and understanding hardware provisioning requirements. It can also be used for end-to-end troubleshooting as well as billing purposes. In this work we describe Gratia, a federated accounting service jointly developed at Fermilab and Holland Computing Center at University of Nebraska-Lincoln. The Open Science Grid, Fermilab, HCC, and several other institutions have used Gratia in production for several years. The current development activities include expanding Virtual Machines provisioning information, XSEDE allocation usage accounting, and Campus Grids resource utilization. We also identify the direction of future work: improvement and expansion of Cloud accounting, persistent and elastic storage space allocation, and the incorporation of WAN and LAN network metrics.

  5. Ian Bird, head of Grid development at CERN

    Patrice Loïez

    2003-01-01

    "The Grid enables us to harness the power of scientific computing centres wherever they may be to provide the most powerful computing resource the world has to offer," said Ian Bird, head of Grid development at CERN. The Grid is a new method of sharing processing power between computers in centres around the world.

  6. Incentive Mechanism of Micro-grid Project Development

    Yong Long

    2018-01-01

    Full Text Available Due to the issue of cost and benefit, the investment demand and consumption demand of micro-grids are insufficient in the early stages, which makes all parties lack motivation to participate in the development of micro-grid projects and leads to the slow development of micro-grids. In order to promote the development of micro-grids, the corresponding incentive mechanism should be designed to motivate the development of micro-grid projects. Therefore, this paper builds a multi-stage incentive model of micro-grid project development involving government, grid corporation, energy supplier, equipment supplier, and the user in order to study the incentive problems of micro-grid project development. Through the solution and analysis of the model, this paper deduces the optimal subsidy of government and the optimal cooperation incentive of the energy supplier, and calculates the optimal pricing strategy of grid corporation and the energy supplier, and analyzes the influence of relevant factors on optimal subsidy and incentive. The study reveals that the cost and social benefit of micro-grid development have a positive impact on micro-grid subsidy, technical level and equipment quality of equipment supplier as well as the fact that government subsidies positively adjust the level of cooperation incentives and price incentives. In the end, the validity of the model is verified by numerical analysis, and the incentive strategy of each participant is analyzed. The research of this paper is of great significance to encourage project development of micro-grids and to promote the sustainable development of micro-grids.

  7. Smart grid development and households in experimental projects

    Hansen, Meiken

    to the electricity grids and call for the development of smart grids. The Danish Smart Grid Strategy states that ‘flexible electricity consumption’ is the main purpose of smart grids in Denmark, envisioning that future consumers will have flexible consumption of electricity. Thus, they are expected to respond...... to the supply side and consume energy when it is available. The goal of this thesis is to investigate how household consumers are integrated in smart grid development activities. More specifically, it focuses on household consumers, as they are represented in experimental projects in the smart grid area...... been little research on the area in Danish smart grid experimental projects. Overall, the consumers are expected, to some extent, to provide flexibility by changing their energy-consuming practices because of economic incentives by means of manual or automated control of devices. Moreover, the Danish...

  8. Development of a Smart Grid Simulation Environment

    Delamare, J; Bitachon, B.; Peng, Z.; Wang, Y.; Haverkort, Boudewijn R.H.M.; Jongerden, M.R.

    2015-01-01

    With the increased integration of renewable energy sources the interaction between energy producers and consumers has become a bi-directional exchange. Therefore, the electrical grid must be adapted into a smart grid which effectively regulates this two-way interaction. With the aid of simulation,

  9. Millimeterwave Space Power Grid architecture development 2012

    Komerath, Narayanan; Dessanti, Brendan; Shah, Shaan

    This is an update of the Space Power Grid architecture for space-based solar power with an improved design of the collector/converter link, the primary heater and the radiator of the active thermal control system. The Space Power Grid offers an evolutionary approach towards TeraWatt-level Space-based solar power. The use of millimeter wave frequencies (around 220GHz) and Low-Mid Earth Orbits shrinks the size of the space and ground infrastructure to manageable levels. In prior work we showed that using Brayton cycle conversion of solar power allows large economies of scale compared to the linear mass-power relationship of photovoltaic conversion. With high-temperature materials permitting 3600 K temperature in the primary heater, over 80 percent cycle efficiency was shown with a closed helium cycle for the 1GW converter satellite which formed the core element of the architecture. Work done since the last IEEE conference has shown that the use of waveguides incorporated into lighter-than-air antenna platforms, can overcome the difficulties in transmitting millimeter wave power through the moist, dense lower atmosphere. A graphene-based radiator design conservatively meets the mass budget for the waste heat rejection system needed for the compressor inlet temperature. Placing the ultralight Mirasol collectors in lower orbits overcomes the solar beam spot size problem of high-orbit collection. The architecture begins by establishing a power exchange with terrestrial renewable energy plants, creating an early revenue generation approach with low investment. The approach allows for technology development and demonstration of high power millimeter wave technology. A multinational experiment using the International Space Station and another power exchange satellite is proposed to gather required data and experience, thus reducing the technical and policy risks. The full-scale architecture deploys pairs of Mirasol sunlight collectors and Girasol 1 GW converter satellites t

  10. Development of numerical Grids for UZ Flow and Transport Modeling

    P. Dobson

    2004-01-01

    This report describes the methods used to develop numerical grids of the unsaturated hydrogeologic system beneath Yucca Mountain, Nevada. Numerical grid generation is an integral part of the development of the unsaturated zone (UZ) flow and transport model, a complex, three-dimensional (3-D) model of Yucca Mountain. This revision contains changes made to improve the clarity of the description of grid generation. The numerical grids, developed using current geologic, hydrogeologic, and mineralogic data, provide the necessary framework to: (1) develop calibrated hydrogeologic property sets and flow fields, (2) test conceptual hypotheses of flow and transport, and (3) predict flow and transport behavior under a variety of climatic and thermal-loading conditions. The technical scope, content, and management for the current revision of this report are described in the planning document ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Section 2). Grids generated and documented in this report supersede those documented in Revision 00 of this report, ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (BSC 2001 [DIRS 159356]). The grids presented in this report are the same as those developed in Revision 01 (BSC 2003 [DIRS 160109]); however, the documentation of the development of the grids in Revision 02 has been updated to address technical inconsistencies and achieve greater transparency, readability, and traceability. The constraints, assumptions, and limitations associated with this report are discussed in the appropriate sections that follow

  11. Development and Operation of the D-Grid Infrastructure

    Fieseler, Thomas; Gűrich, Wolfgang

    D-Grid is the German national grid initiative, granted by the German Federal Ministry of Education and Research. In this paper we present the Core D-Grid which acts as a condensation nucleus to build a production grid and the latest developments of the infrastructure. The main difference compared to other international grid initiatives is the support of three middleware systems, namely LCG/gLite, Globus, and UNICORE for compute resources. Storage resources are connected via SRM/dCache and OGSA-DAI. In contrast to homogeneous communities, the partners in Core D-Grid have different missions and backgrounds (computing centres, universities, research centres), providing heterogeneous hardware from single processors to high performance supercomputing systems with different operating systems. We present methods to integrate these resources and services for the DGrid infrastructure like a point of information, centralized user and virtual organization management, resource registration, software provision, and policies for the implementation (firewalls, certificates, user mapping).

  12. Development of structural technology for a high performance spacer grid

    Song, Kee Nam; Kim, H. K.; Kang, H. S.

    2003-03-01

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 14 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates six are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models

  13. Developing survey grids to substantiate freedom from exotic pests

    John W. Coulston; Frank H. Koch; William D. Smith

    2009-01-01

    Systematic, hierarchical intensification of the Environmental Monitoring and Assessment Program hexagon for North America yields a simple procedure for developing national-scale survey grids. In this article, we describe the steps to create a national-scale survey grid using a risk map as the starting point. We illustrate the steps using an exotic pest example in which...

  14. The Experiment Method for Manufacturing Grid Development on Single Computer

    XIAO Youan; ZHOU Zude

    2006-01-01

    In this paper, an experiment method for the Manufacturing Grid application system development in the single personal computer environment is proposed. The characteristic of the proposed method is constructing a full prototype Manufacturing Grid application system which is hosted on a single personal computer with the virtual machine technology. Firstly, it builds all the Manufacturing Grid physical resource nodes on an abstraction layer of a single personal computer with the virtual machine technology. Secondly, all the virtual Manufacturing Grid resource nodes will be connected with virtual network and the application software will be deployed on each Manufacturing Grid nodes. Then, we can obtain a prototype Manufacturing Grid application system which is working in the single personal computer, and can carry on the experiment on this foundation. Compared with the known experiment methods for the Manufacturing Grid application system development, the proposed method has the advantages of the known methods, such as cost inexpensively, operation simple, and can get the confidence experiment result easily. The Manufacturing Grid application system constructed with the proposed method has the high scalability, stability and reliability. It is can be migrated to the real application environment rapidly.

  15. Universal Health Coverage: A burning need for developing countries

    Zaman, Sojib Bin; Hossain, Naznin

    2017-01-01

    The term of universal health coverage (UHC) are getting popularity among the countries who have not yet attained it. Majority of the developing countries are planning to implement the UHC to protect the vulnerable citizen who cannot afford to buy the health services. Poor people living in developing countries, where there is no UHC, are bereft of getting equal health care. They have to bear a significant amount of health cost in buying different services which often causes catastrophic expend...

  16. Grid integration impacts on wind turbine design and development

    Hansen, Anca Daniela; Cutululis, Nicolaos Antonio; Sørensen, Poul Ejnar

    2009-01-01

    This paper presents an overall perspective on contemporary issues like wind power plants and grid integration. The purpose is to present and discuss the impacts of emerging new grid connection requirements on modern wind turbines. The grid integration issue has caused several new challenges......, the grid integration aspect has also an effect on wind turbines' role in the power system, on wind turbine technologies' survival on the market, as well as on the wind turbines' loads. Over the last years, it became obviously, that there it is an increasing need for design and research of wind turbines...... to the wind turbine design and development. The survival of different wind turbine concepts and controls is strongly conditioned by their ability to comply with stringent grid connection requirements, imposed by utility companies. Beside its impact on the mechanical design and control of wind turbines...

  17. Development of Numerical Grids for UZ Flow and Transport Modeling

    Hinds, J.

    2001-01-01

    This Analysis/Model Report (AMR) describes the methods used to develop numerical grids of the unsaturated hydrogeologic system beneath Yucca Mountain. Numerical grid generation is an integral part of the development of a complex, three-dimensional (3-D) model, such as the Unsaturated-Zone Flow and Transport Model (UZ Model) of Yucca Mountain. The resulting numerical grids, developed using current geologic, hydrogeologic, and mineralogic data, provide the necessary framework to: (1) develop calibrated hydrogeologic property sets and flow fields, (2) test conceptual hypotheses of flow and transport, and (3) predict flow and transport behavior under a variety of climatic and thermal loading conditions. Revision 00 of the work described herein follows the planning and work direction outlined in the ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (CRWMS M and O 1999c). The technical scope, content, and management of ICN 01 of this AMR is currently controlled by the planning document, ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (BSC 2001a). The scope for the TBV resolution actions in this ICN is described in the ''Technical Work Plan for: Integrated Management of Technical Product Input Department'' (BSC 2001 b, Addendum B, Section 4.1). The steps involved in numerical grid development include: (1) defining the location of important calibration features, (2) determining model grid layers and fault geometry based on the Geologic Framework Model (GFM), the Integrated Site Model (ISM), and definition of hydrogeologic units (HGUs), (3) analyzing and extracting GFM and ISM data pertaining to layer contacts and property distributions, (4) discretizing and refining the two-dimensional (2-D), plan-view numerical grid, (5) generating the 3-D grid with finer resolution at the repository horizon and within the Calico Hills nonwelded (CHn) hydrogeologic unit, and (6) formulating the dual-permeability mesh. The

  18. How Does the Modular Organization of Entorhinal Grid Cells Develop?

    Stephen eGrossberg

    2014-06-01

    Full Text Available The entorhinal-hippocampal system plays a crucial role in spatial cognition and navigation. Since the discovery of grid cells in layer II of medial entorhinal cortex (MEC, several types of models have been proposed to explain their development and operation; namely, continuous attractor network models, oscillatory interference models, and self-organizing map (SOM models. Recent experiments revealing the in vivo intracellular signatures of grid cells (Domnisoru et al., 2013; Schmidt-Heiber & Hausser, 2013, the primarily inhibitory recurrent connectivity of grid cells (Couey et al., 2013; Pastoll et al., 2013, and the topographic organization of grid cells within anatomically overlapping modules of multiple spatial scales along the dorsoventral axis of MEC (Stensola et al., 2012 provide strong constraints and challenges to existing grid cell models. This article provides a computational explanation for how MEC cells can emerge through learning with grid cell properties in modular structures. Within this SOM model, grid cells with different rates of temporal integration learn modular properties with different spatial scales. Model grid cells learn in response to inputs from multiple scales of directionally-selective stripe cells (Krupic et al., 2012; Mhatre et al., 2012 that perform path integration of the linear velocities that are experienced during navigation. Slower rates of grid cell temporal integration support learned associations with stripe cells of larger scales. The explanatory and predictive capabilities of the three types of grid cell models are comparatively analyzed in light of recent data to illustrate how the SOM model overcomes problems that other types of models have not yet handled.

  19. Recent Developments in Grid Generation and Force Integration Technology for Overset Grids

    Chan, William M.; VanDalsem, William R. (Technical Monitor)

    1994-01-01

    Recent developments in algorithms and software tools for generating overset grids for complex configurations are described. These include the overset surface grid generation code SURGRD and version 2.0 of the hyperbolic volume grid generation code HYPGEN. The SURGRD code is in beta test mode where the new features include the capability to march over a collection of panel networks, a variety of ways to control the side boundaries and the marching step sizes and distance, a more robust projection scheme and an interpolation option. New features in version 2.0 of HYPGEN include a wider range of boundary condition types. The code also allows the user to specify different marching step sizes and distance for each point on the surface grid. A scheme that takes into account of the overlapped zones on the body surface for the purpose of forces and moments computation is also briefly described, The process involves the following two software modules: MIXSUR - a composite grid generation module to produce a collection of quadrilaterals and triangles on which pressure and viscous stresses are to be integrated, and OVERINT - a forces and moments integration module.

  20. Off grid Solar power supply: the real green development

    Dellinger, B.; Mansard, M.

    2010-01-01

    Solar experience is now 30 years. In spite of the tremendous growth of the developed world grid connect market, quite a number of companies remain seriously involved in the off grid sector. Solar started in the field as the sole solution to give access to energy and water to rural communities. With major actors involved at early stage, a number of reliable technical solutions were developed and implemented. These solutions have gradually drawn the attention of industrial companies investing in emerging countries and needing reliable energy sources. On top of improving standard of living, Off grid solar solutions also create economical opportunity for the local private sector getting involved in maintenance and services around the energy system. As at today, hundreds thousand of sites daily operate on site. However the needs remain extremely high. That is the reasons why off grid solar remains a major tool for sustainable development. (author)

  1. Development of laser weld monitoring system for PWR space grid

    Chung, Chin Man; Kim, Cheol Jung; Kim, Min Suk

    1998-06-01

    The laser welding monitoring system was developed to inspect PWR space grid welding for KNFC. The demands for this optical monitoring system were applied to Q.C. and process control in space grid welding. The thermal radiation signal from weld pool can be get the variation of weld pool size. The weld pool size and depth are verified by analyzed wavelength signals from weld pool. Applied this monitoring system in space grid weld, improved the weld productivity. (author). 4 refs., 5 tabs., 31 figs

  2. Smart Grid Development Issues for Terrestrial and Space Applications

    Soeder, James F.

    2014-01-01

    The development of the so called Smart Grid has as many definitions as individuals working in the area. Based on the technology or technologies that are of interest, be it high speed communication, renewable generation, smart meters, energy storage, advanced sensors, etc. they can become the individual defining characteristic of the Smart Grid. In reality the smart grid encompasses all of these items and quite at bit more. This discussion attempts to look at what the needs are for the grid of the future, such as the issues of increased power flow capability, use of renewable energy, increased security and efficiency and common power and data standards. It also shows how many of these issues are common with the needs of NASA for future exploration programs. A common theme to address both terrestrial and space exploration issues is to develop micro-grids that advertise the ability to enable the load leveling of large power generation facilities. However, for microgrids to realize their promise there needs to a holistic systems approach to their development and integration. The overall system integration issues are presented along with potential solution methodologies.

  3. Baltic Grid for e-Science Development in Baltic

    Ilmars, S.; Olgerts, B.

    2007-01-01

    Latvia, Estonia and Lithuania as new members of European Union now are involved in e- Science projects. The Baltic Grid (BG) project is a first step to infrastructure development for e-Science grid computing. Together with the universities of Baltic States some universities and organisations of neighbouring countries are involved in BG project to disseminate their experience and management skills. This paper presents achievements and experiences of BG project in e-infrastructure development in Baltic States and in Latvia and Riga Technical University, in particular. (Author)

  4. Sandia and NJ TRANSIT Authority Developing Resilient Power Grid

    Hanley, Charles J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ellis, Abraham [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-11-01

    Through the memorandum of understanding between the Depratment of Energy (DOE), the New Jersey Transit Authority (NJ Transit), and the New Jersey Board of Public Utilities, Sandia National Labs is assisting NJ Transit in developing NJ TransitGrid: an electric microgrid that will include a large-scale gas-fired generation facility and distributed energy resources (photovoltaics [PV], energy storage, electric vehicles, combined heat and power [CHP]) to supply reliable power during storms or other times of significant power failure. The NJ TransitGrid was awarded $410M from the Department of Transportation to develop a first-of-its-kind electric microgrid capable of supplying highly-reliable power.

  5. Software-Based Challenges of Developing the Future Distribution Grid

    Stewart, Emma; Kiliccote, Sila; McParland, Charles

    2014-06-01

    The software that the utility industry currently uses may be insufficient to analyze the distribution grid as it rapidly modernizes to include active resources such as distributed generation, switch and voltage control, automation, and increasingly complex loads. Although planners and operators have traditionally viewed the distribution grid as a passive load, utilities and consultants increasingly need enhanced analysis that incorporates active distribution grid loads in order to ensure grid reliability. Numerous commercial and open-source tools are available for analyzing distribution grid systems. These tools vary in complexity from providing basic load-flow and capacity analysis under steady-state conditions to time-series analysis and even geographical representations of dynamic and transient events. The need for each type of analysis is not well understood in the industry, nor are the reasons that distribution analysis requires different techniques and tools both from those now available and from those used for transmission analysis. In addition, there is limited understanding of basic capability of the tools and how they should be practically applied to the evolving distribution system. The study reviews the features and state of the art capability of current tools, including usability and visualization, basic analysis functionality, advanced analysis including inverters, and renewable generation and load modeling. We also discuss the need for each type of distribution grid system analysis. In addition to reviewing basic functionality current models, we discuss dynamics and transient simulation in detail and draw conclusions about existing software?s ability to address the needs of the future distribution grid as well as the barriers to modernization of the distribution grid that are posed by the current state of software and model development. Among our conclusions are that accuracy, data transfer, and data processing abilities are key to future

  6. Development of Mitsubishi high thermal performance grid 2 - overview of the development and Dnb test results

    Hoshi, M.; Imaizumi, M.; Mori, M.; Hori, K.; Ikeda, K.

    2001-01-01

    Spacer grid plays fundamental role in thermal performance of PWR fuel assembly. Grid spacer with higher thermal performance gives greater DNB (Departure from Nucleate Boiling) margin for the core. Mitsubishi has developed a prototype Zircaloy grid with higher thermal performance. In this paper, process of the development and DNB test results of the grid is presented. To achieve a goal to design grid with higher DNB performance, CFD (Computational Fluid Dynamics) and Freon DNB test are employed in the development. It is also concerned that the grid should be hydraulically compatible to existing grid. CFD is used in examining mixing capability and pressure drop for early stage of the development. Freon DNB test is used for preliminary checking of DNB performance for several design of the grids. After the final design is fixed, DNB test has been carried out at a high pressure / high temperature water test loop to verify the DNB performance. Also, hydraulic test has been done in a water test loop. The test results show that the grid has higher DNB performance and lower pressure loss coefficient compared with existing grid. It is also concluded that a combination of CFD and Freon DNB testing is successful tool for designing and development of grid. (authors)

  7. Development of Numerical Grids for UZ Flow and Transport Modeling

    P. Dobson

    2003-01-01

    This Scientific Analysis report describes the methods used to develop numerical grids of the unsaturated hydrogeologic system beneath Yucca Mountain. Numerical grid generation is an integral part of the development of the Unsaturated Zone Flow and Transport Model (UZ Model), a complex, three-dimensional (3-D) model of Yucca Mountain. This revision incorporates changes made to both the geologic framework model and the proposed repository layout. The resulting numerical grids, developed using current geologic, hydrogeologic, and mineralogic data, provide the necessary framework to: (1) develop calibrated hydrogeologic property sets and flow fields, (2) test conceptual hypotheses of flow and transport, and (3) predict flow and transport behavior under a variety of climatic and thermal-loading conditions. The technical scope, content, and management of this Scientific Analysis report was initially controlled by the planning document, ''Technical Work Plan (TWP) for: Unsaturated Zone Sections of License Application Chapters 8 and 12'' (BSC 2002 [159051], Section 1.6.4). This TWP was later superseded by ''Technical Work Plan for: Performance Assessment Unsaturated Zone'' (BSC 2002 [160819]), which contains the Data Qualification Plan used to qualify the DTN: MO0212GWLSSPAX.000 [161271] (See Attachment IV). Grids generated and documented in this report supersede those documented in previous versions of this report (BSC 2001 [159356]). The constraints, assumptions, and limitations associated with this report are discussed in the appropriate sections that follow. There were no deviations from the TWP scope of work in this report. Two software packages not listed in Table IV-2 of the TWP (BSC 2002 [159051]), ARCINFO V7.2.1 (CRWMS M and O 2000 [157019]; USGS 2000 [148304]) and 2kgrid8.for V1.0 (LBNL 2002 [154787]), were utilized in the development of the numerical grids; the use of additional software is accounted for in the TWP (BSC 2002 [159051], Section 13). The use of

  8. Developing a Grid-based search and categorization tool

    Haya, Glenn; Vigen, Jens

    2003-01-01

    Grid technology has the potential to improve the accessibility of digital libraries. The participants in Project GRACE (Grid Search And Categorization Engine) are in the process of developing a search engine that will allow users to search through heterogeneous resources stored in geographically distributed digital collections. What differentiates this project from current search tools is that GRACE will be run on the European Data Grid, a large distributed network, and will not have a single centralized index as current web search engines do. In some cases, the distributed approach offers advantages over the centralized approach since it is more scalable, can be used on otherwise inaccessible material, and can provide advanced search options customized for each data source.

  9. Evolutions of the power grid: vector of sustainable development

    Croguennoc, Alain; Dalle, Bernard; Archambault, R.; Bony, P.E.; Bouneau, C.; Bourguignon, B.; Bouvier, D.; Beltran, A.; Chauvancy, A.; Chevassus-au-Louis, B.; Citi, S.; Claverie, B.; Colomb, B.; Dallet, M.; Deveaux, L.; Dubus, D.; Fresnedo, S.; Herreros, J.; Herz, O.; Isoard, J.; Jaussaud, E.; Laffaye, H.; Laroche, J.P.; Lasserre, D.; Lebas, N.; Lebranchu, D.; Leclerc, F.; Lemoine, D.; Leydier, C.; Malique, F.; Mazoyer, F.; Meudic, M.A.; Nguefeu, S.; Pajot, S.; Pilate, J.M.; Real, G.; Rosso, F.; Waeraas de Saint Martin, G.; Schwartzmann, S.; Serres, E.

    2011-01-01

    The abatement of energy consumption and the mass production of renewable energy are the main actions implemented to meet the climate challenge. In this context, the share of electric power in the final consumption is continuously growing up. Adapting the power transportation grid is necessary if we want to take up the challenge of the new paradigm 'new power generation sites, fatal and intermittent energy'. If this grid is the symbol of a modern and well-equipped France, it is also the revealer of our society antagonisms: change without disruption, progress without sacrifice of heritage and natural landscapes. Industries and grid operators will have to show some innovation and anticipation if they want this deep change to be a success. The French power grid has permitted the regional development in the past and will allow to take up the climate challenge in the future. Its inevitable position in the success of past transformations makes it an essential vector of sustainable development. (J.S.)

  10. ECONOMIC DILLEMMAS OF SMART GRID DEVELOPMENT: ILLUSIONS, REALITIES AND PROSPECTS

    I. V. Danilin

    2017-01-01

    Full Text Available Purpose: the purpose of this work is to systematize data on the economic effects of Smart Grids, classify these effects, identify the challenges associated with their implementation, elaborate approaches and conditions under which Smart Grids can maximize returns for business entities, the economy and society.Methods: the work is based on the analysis of scientific and analytical materials devoted to the research problem, including those prepared on the basis of surveys of industry actors, as well as systematic materials on implemented pilot and industrial projects in the field of Smart Grids.Results: two groups of economic effects of Smart Grids are considered: optimization ones (related to the operating and investment costs reductions of industry actors and innovative (related to the implementation of the prospective functionality of Smart Grids. It is shown that, despite the presence of positive economic results, the optimization effects of Smart Grids are partly overestimated, partly have temporary nature (due to natural limits for long-term costs savings and economy of investment resources, transfer of the resulting benefits to consumers and other reasons. Innovative effects are still difficult to assess due to the predominantly pilot nature of the Smart Grids projects, inadequate level of market penetration (considering network effects in accordance with the Metcalfe Law and other factors. The contradiction between the declared innovative effects and the existing architecture of the market, industry regulations (especially tariff formation and other systemic factors is accented – this serves as a natural barrier to the implementation of innovative effects.Conclusions and relevance: narratives describing the development of Smart Grids can be considered a metaphor for the representations of subjects about the «ideal» energy system of the future, so it is senseless to expect Smart Grid technology to solve all possible problems of the

  11. INTELLIGENT NETWORKS, SMART GRIDS CONCEPT, CRUCIAL TECHNOLOGIES FOR SUSTAINABLE DEVELOPMENT

    Constantin RADU

    2011-05-01

    Full Text Available In this article is presented the concept of smart grids, a very important technology for sustainable development. In the context of globalization of the world lives in an increasingly complex security environment, with rapid changes, some obvious, others less obvious implications in the short, medium or long term, international, national, local and up to every citizen. All countries in the globalized world economy is facing energy problems in terms of climate change have intensified in the twentieth century.

  12. Power control for wind turbines in weak grids: Concepts development

    Bindner, H.

    1999-01-01

    will make wind power more firm and possible to connect to weaker grids. So, when the concept is matured, theexpectation is that for certain wind power installations, the cost of the power control is paid back as added wind power capacity value and saved grid reinforcement costs. Different systems...... and analyze methods and technologies for making it viable to utilize more of the wind potential in remote areas. The suggestion is to develop a power control concept for wind turbines which will even out thepower fluctuations and make it possible to increase the wind energy penetration. The main options...... are to combine wind power with a pumped hydro power storage or with an AC/DC converter and battery storage. The AC/DC converter can either be an "add-on" typeor it can be designed as an integrated part of a variable speed wind turbine. The idea is that combining wind power with the power control concept...

  13. Development of a Cartesian grid based CFD solver (CARBS)

    Vaidya, A.M.; Maheshwari, N.K.; Vijayan, P.K.

    2013-12-01

    Formulation for 3D transient incompressible CFD solver is developed. The solution of variable property, laminar/turbulent, steady/unsteady, single/multi specie, incompressible with heat transfer in complex geometry will be obtained. The formulation can handle a flow system in which any number of arbitrarily shaped solid and fluid regions are present. The solver is based on the use of Cartesian grids. A method is proposed to handle complex shaped objects and boundaries on Cartesian grids. Implementation of multi-material, different types of boundary conditions, thermo physical properties is also considered. The proposed method is validated by solving two test cases. 1 st test case is that of lid driven flow in inclined cavity. 2 nd test case is the flow over cylinder. The 1 st test case involved steady internal flow subjected to WALL boundaries. The 2 nd test case involved unsteady external flow subjected to INLET, OUTLET and FREE-SLIP boundary types. In both the test cases, non-orthogonal geometry was involved. It was found that, under such a wide conditions, the Cartesian grid based code was found to give results which were matching well with benchmark data. Convergence characteristics are excellent. In all cases, the mass residue was converged to 1E-8. Based on this, development of 3D general purpose code based on the proposed approach can be taken up. (author)

  14. Barriers and Solutions to Smart Water Grid Development.

    Cheong, So-Min; Choi, Gye-Woon; Lee, Ho-Sun

    2016-03-01

    This limited review of smart water grid (SWG) development, challenges, and solutions provides an initial assessment of early attempts at operating SWGs. Though the cost and adoption issues are critical, potential benefits of SWGs such as efficient water conservation and distribution sustain the development of SWGs around the world. The review finds that the keys to success are the new regulations concerning data access and ownership to solve problems of security and privacy; consumer literacy to accept and use SWGs; active private sector involvement to coordinate SWG development; government-funded pilot projects and trial centers; and integration with sustainable water management.

  15. Sustainable Energy in Remote Indonesian Grids. Accelerating Project Development

    Hirsch, Brian [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burman, Kari [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Davidson, Carolyn [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Elchinger, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hardison, R. [Winrock International, Little Rock, AR (United States); Karsiwulan, D. [Winrock International, Little Rock, AR (United States); Castermans, B. [Winrock International, Little Rock, AR (United States)

    2015-06-30

    Sustainable Energy for Remote Indonesian Grids (SERIG) is a U.S. Department of Energy (DOE) funded initiative to support Indonesia’s efforts to develop clean energy and increase access to electricity in remote locations throughout the country. With DOE support, the SERIG implementation team consists of the National Renewable Energy Laboratory (NREL) and Winrock International’s Jakarta, Indonesia office. Through technical assistance that includes techno-economic feasibility evaluation for selected projects, government-to-government coordination, infrastructure assessment, stakeholder outreach, and policy analysis, SERIG seeks to provide opportunities for individual project development and a collective framework for national replication office.

  16. Implementation of a Multi-Robot Coverage Algorithm on a Two-Dimensional, Grid-Based Environment

    2017-06-01

    different approaches is based on “ behavior -based” versus “system theory based” approaches to the problem. 1. Behavior –Based Approach Most behavior -based...otherwise, it performs the behavior of IG. This kind of algorithm could be classified as a system theory based approach since the change in the...systems, robot agents are likely to take over mine countermeasure (MCM) missions one day. The path planning coverage algorithm is an essential topic for

  17. The smart grid research network: Road map for Smart Grid research, development and demonstration up to 2020

    Troi, A. [Technical Univ. of Denmark. DTU Electrical Engineering, DTU Risoe Campus, Roskilde (Denmark); Noerregaard Joergensen, B. [Syddansk Univ. (SDU), Odense (Denmark); Mahler Larsen, E. [Technical Univ. of Denmark. DTU Electrical Engineering, Kgs. Lyngby (Denmark)] [and others

    2013-01-15

    This road map is a result of part-recommendation no. 25 in 'MAIN REPORT - The Smart Grid Network's recommendations', written by the Smart Grid Network for the Danish Ministry of Climate, Energy and Building in October 2011. This part-recommendation states: ''Part-recommendation 25 - A road map for Smart Grid research, development and demonstration It is recommended that the electricity sector invite the Ministry to participate in the creation of a road map to ensure that solutions are implemented and coordinated with related policy areas. The sector should also establish a fast-acting working group with representatives from universities, distribution companies and the electric industry, in order to produce a mutual, binding schedule for the RDD of the Smart Grid in Denmark. Time prioritisation of part-recommendation: 2011-2012 Responsibility for implementation of part-recommendation: Universities, along with relevant electric-industry actors, should establish a working group for the completion of a consolidated road map by the end of 2012.'' In its work on this report, the Smart Grid Research Network has focused particularly on part-recommendations 26, 27 and 28 in 'MAIN REPORT - The Smart Grid Network's recommendations', which relate to strengthening and marketing the research infrastructure that will position Denmark as the global hub for Smart Grid development; strengthening basic research into the complex relationships in electric systems with large quantities of independent parties; and improved understanding of consumer behaviour and social economics. Naturally the work has spread to related areas along the way. The work has been conducted by the Smart Grid Research Network. (Author)

  18. Dispatch Strategy Development for Grid-tied Household Energy Systems

    Cardwell, Joseph

    The prevalence of renewable generation will increase in the next several decades and offset conventional generation more and more. Yet this increase is not coming without challenges. Solar, wind, and even some water resources are intermittent and unpredictable, and thereby create scheduling challenges due to their inherent "uncontrolled" nature. To effectively manage these distributed renewable assets, new control algorithms must be developed for applications including energy management, bridge power, and system stability. This can be completed through a centralized control center though efforts are being made to parallel the control architecture with the organization of the renewable assets themselves--namely, distributed controls. Building energy management systems are being employed to control localized energy generation, storage, and use to reduce disruption on the net utility load. One such example is VOLTTRONTM, an agent-based platform for building energy control in real time. In this thesis, algorithms developed in VOLTTRON simulate a home energy management system that consists of a solar PV array, a lithium-ion battery bank, and the grid. Dispatch strategies are implemented to reduce energy charges from overall consumption (/kWh) and demand charges (/kW). Dispatch strategies for implementing storage devices are tuned on a month-to-month basis to provide a meaningful economic advantage under simulated scenarios to explore algorithm sensitivity to changing external factors. VOLTTRON agents provide automated real-time optimization of dispatch strategies to efficiently manage energy supply and demand, lower consumer costs associated with energy usage, and reduce load on the utility grid.

  19. Research and development of fusion grid infrastructure based on atomic energy grid infrastructure (AEGIS)

    Suzuki, Y.; Nakajima, K.; Kushida, N.; Kino, C.; Aoyagi, T.; Nakajima, N.; Iba, K.; Hayashi, N.; Ozeki, T.; Totsuka, T.; Nakanishi, H.; Nagayama, Y.

    2008-01-01

    In collaboration with the Naka Fusion Institute of Japan Atomic Energy Agency (NFI/JAEA) and the National Institute for Fusion Science of National Institute of Natural Science (NIFS/NINS), Center for Computational Science and E-systems of Japan Atomic Energy Agency (CCSE/JAEA) aims at establishing an integrated framework for experiments and analyses in nuclear fusion research based on the atomic energy grid infrastructure (AEGIS). AEGIS has been being developed by CCSE/JAEA aiming at providing the infrastructure that enables atomic energy researchers in remote locations to carry out R and D efficiently and collaboratively through the Internet. Toward establishing the integrated framework, we have been applying AEGIS to pre-existing three systems: experiment system, remote data acquisition system, and integrated analysis system. For the experiment system, the secure remote experiment system with JT-60 has been successfully accomplished. For the remote data acquisition system, it will be possible to equivalently operate experimental data obtained from LHD data acquisition and management system (LABCOM system) and JT-60 Data System. The integrated analysis system has been extended to the system executable in heterogeneous computers among institutes

  20. Automated tools and techniques for distributed Grid Software: Development of the testbed infrastructure

    Aguado Sanchez, C; Di Meglio, A

    2007-01-01

    Grid technology is becoming more and more important as the new paradigm for sharing computational resources across different organizations in a secure way. The great powerfulness of this solution, requires the definition of a generic stack of services and protocols and this is the scope of the different Grid initiatives. As a result of international collaborations for its development, the Open Grid Forum created the Open Grid Services Architecture (OGSA) which aims to define the common set of...

  1. Developing Information Power Grid Based Algorithms and Software

    Dongarra, Jack

    1998-01-01

    This was an exploratory study to enhance our understanding of problems involved in developing large scale applications in a heterogeneous distributed environment. It is likely that the large scale applications of the future will be built by coupling specialized computational modules together. For example, efforts now exist to couple ocean and atmospheric prediction codes to simulate a more complete climate system. These two applications differ in many respects. They have different grids, the data is in different unit systems and the algorithms for inte,-rating in time are different. In addition the code for each application is likely to have been developed on different architectures and tend to have poor performance when run on an architecture for which the code was not designed, if it runs at all. Architectural differences may also induce differences in data representation which effect precision and convergence criteria as well as data transfer issues. In order to couple such dissimilar codes some form of translation must be present. This translation should be able to handle interpolation from one grid to another as well as construction of the correct data field in the correct units from available data. Even if a code is to be developed from scratch, a modular approach will likely be followed in that standard scientific packages will be used to do the more mundane tasks such as linear algebra or Fourier transform operations. This approach allows the developers to concentrate on their science rather than becoming experts in linear algebra or signal processing. Problems associated with this development approach include difficulties associated with data extraction and translation from one module to another, module performance on different nodal architectures, and others. In addition to these data and software issues there exists operational issues such as platform stability and resource management.

  2. Prosumers and smart grid technologies in Denmark: developing user competences in smart grid households

    Hansen, Meiken; Hauge, Bettina

    2017-01-01

    This paper explores and describes resident’s experiences from a smart grid project that involved 20 households in a rural area in Denmark and ran from 2014 to 2015. The study is based on qualitative data from the participating households, collected 6, 12 and 18 months after the start...... of the intervention. Drawing on theories of social practice and the three intertwined elements of a practice: competences, images and materials, the paper contributes with an in-depth analysis of a complex intervention, focusing on how the participants changed energy practices as a result of the installed smart grid...

  3. Smart grid

    Choi, Dong Bae

    2001-11-01

    This book describes press smart grid from basics to recent trend. It is divided into ten chapters, which deals with smart grid as green revolution in energy with introduction, history, the fields, application and needed technique for smart grid, Trend of smart grid in foreign such as a model business of smart grid in foreign, policy for smart grid in U.S.A, Trend of smart grid in domestic with international standard of smart grid and strategy and rood map, smart power grid as infrastructure of smart business with EMS development, SAS, SCADA, DAS and PQMS, smart grid for smart consumer, smart renewable like Desertec project, convergence IT with network and PLC, application of an electric car, smart electro service for realtime of electrical pricing system, arrangement of smart grid.

  4. Smart design rules for smart grids : analysing local smart grid development through an empirico-legal institutional lens

    Lammers, Imke; Heldeweg, Michiel A.

    2016-01-01

    Background: This article entails an innovative approach to smart grid technology implementation, as it connects governance research with legal analysis. We apply the empirico-legal ‘ILTIAD framework’, which combines Elinor Ostrom’s Institutional Analysis and Development (IAD) framework with

  5. Research report on development of spacer grid strap for AFA 3G fuel assembly

    Ye Yuandong

    2004-11-01

    The current development and tendency for fuel assemblies being of low leakage, high burn-up and long cycle fuel reload in the world are presented, and the necessity and feasibility to develop the spacer grid for high burn-up fuel assembly are elaborated. Considering all the activities in implementing of spacer grid and the technical difficulties in machining of tools, the major technological processes are introduced; the research program and the approaches to develop the spacer grid while research targets and overall schedule are defined and some key technical points and applicable practices are discussed. Finally the requirements and the conditions necessary for developing of spacer grid are proposed. (authors)

  6. Planet-Scale grid A particle collier leads data grid developers to unprecedented dimensions

    Thibodeau, Patrick

    2005-01-01

    In 2007, scientists will begin smashing protons and ions together in a massive, multinational experiment to understand what the universe looked like tiny fractions of a second after the Big Bang. The particle accelerator used in this test will release a vast flood of data on a scale unlike anything seen before, and for that scientists will need a computing grid of equally great capability

  7. Seeking consensus on universal health coverage indicators in the sustainable development goals.

    Reddock, Jennifer

    2017-01-01

    There is optimism that the inclusion of universal health coverage in the Sustainable Development Goals advances its prominence in global and national health policy. However, formulating indicators for Target 3.8 through the Inter-Agency Expert Group on Sustainable Development Indicators has been challenging. Achieving consensus on the conceptual and methodological aspects of universal health coverage is likely to take some time in multi-stakeholder fora compared with national efforts to select indicators.

  8. Development and test of selective sorting grids used in the Norway lobster (Nephrops norvegicus) fishery

    Madsen, Niels; Holst, René; Frandsen, Rikke

    2017-01-01

    Due to generally high discard rates in Norway lobster (Nephrops norvegicus) fisheries, a discard ban coming up and to the cod recovery plan in several areas, selective sorting grids have been tested in many areas and are specified by legislation for use in the Kattegat and Skagerrak area bordering...... Norway, Denmark and Sweden. Grids are very selective, but they can lead to loss of landable Norway lobster and valuable fish species. To improve retention of these species, we developed three new grids using made by polyurethane to make them flexible: One grid had horizontal bars, one had vertical bars....... More flatfish passed the grid with horizontal bars compared to that with vertical bars, but the retention rate was still low. Use of the guiding funnel increased the contact with the grid considerably for both target and unwanted species. In all three grid designs, there were losses of Norway lobster...

  9. Health workers and vaccination coverage in developing countries: an econometric analysis.

    Anand, Sudhir; Bärnighausen, Till

    2007-04-14

    Vaccine-preventable diseases cause more than 1 million deaths among children in developing countries every year. Although health workers are needed to do vaccinations, the role of human resources for health as a determinant of vaccination coverage at the population level has not been investigated. Our aim was to test whether health worker density was positively associated with childhood vaccination coverage in developing countries. We did cross-country multiple regression analyses with coverage of three vaccinations--measles-containing vaccine (MCV); diphtheria, tetanus, and pertussis (DTP3); and poliomyelitis (polio3)--as dependent variables. Aggregate health worker density was an independent variable in one set of regressions; doctor and nurse densities were used separately in another set. We controlled for national income per person, female adult literacy, and land area. Health worker density was significantly associated with coverage of all three vaccinations (MCV p=0.0024; DTP3 p=0.0004; polio3 p=0.0008). However, when the effects of doctors and nurses were assessed separately, we found that nurse density was significantly associated with coverage of all three vaccinations (MCV p=0.0097; DTP3 p=0.0083; polio3 p=0.0089), but doctor density was not (MCV p=0.7953; DTP3 p=0.7971; polio3 p=0.7885). Female adult literacy was positively associated, and land area negatively associated, with vaccination coverage. National income per person had no effect on coverage. A higher density of health workers (nurses) increases the availability of vaccination services over time and space, making it more likely that children will be vaccinated. After controlling for other determinants, the level of income does not contribute to improved immunisation coverage. Health workers can be a major constraining factor on vaccination coverage in developing countries.

  10. Electric grid in Spain: a private network of optical fiber with national coverage; Red electrica de Espana: una red privada de fibra optica con cobertura nacional

    Gonzalez, A.

    1995-12-31

    Red Electrica constructed a grid with optical fiber in 1989 for the grids of 400-220 Kv. In 1995 the length of the grid will be of 6.600 Km. This grid supplies the telecommunication advanced services and contributes in the efficiency and quality of different tasks of Red Electrica.

  11. Customer-­Centric Business Models for Smart Grid Development

    Schabram, Sarah

    2013-01-01

    The digitalization of the electricity grid can provide politicians and different kinds of companies with solid benefits in terms of efficiency, renewable integration and control. However, some part of the deployment of smart grids is only possible with the engagement of consumers who are required to change their behavior significantly. This behavioral change can be induced if energy companies (incumbents and new players) adopt business models that do not sell a technology but use technology t...

  12. Mini-grid based off-grid electrification to enhance electricity access in developing countries: What policies may be required?

    Bhattacharyya, Subhes C.; Palit, Debajit

    2016-01-01

    With 1.2 billion people still lacking electricity access by 2013, electricity access remains a major global challenge. Although mini-grid based electrification has received attention in recent times, their full exploitation requires policy support covering a range of areas. Distilling the experience from a five year research project, OASYS South Asia, this paper presents the summary of research findings and shares the experience from four demonstration activities. It suggests that cost-effective universal electricity service remains a challenge and reaching the universal electrification target by 2030 will remain a challenge for the less developed countries. The financial, organisational and governance weaknesses hinder successful implementation of projects in many countries. The paper then provides 10 policy recommendations to promote mini-grids as a complementary route to grid extension to promote electricity access for successful outcomes. - Highlights: •The academic and action research activities undertaken through OASYS South Asia Project are reported. •Evidence produced through a multi-dimensional participatory framework supplemented by four demonstration projects. •Funding and regulatory challenges militate against universal electrification objectives by 2030. •Innovative business approaches linking local mini-grids and livelihood opportunities exist. •Enabling policies are suggested to exploit such options.

  13. Development and Evaluation of a Methodology for the Generation of Gridded Isotopic Datasets

    Argiriou, A. A.; Salamalikis, V [University of Patras, Department of Physics, Laboratory of Atmospheric Physics, Patras (Greece); Lykoudis, S. P. [National Observatory of Athens, Institute of Environmental and Sustainable Development, Athens (Greece)

    2013-07-15

    The accurate knowledge of the spatial distribution of stable isotopes in precipitation is necessary for several applications. Since the number of rain sampling stations is small and unevenly distributed around the globe, the global distribution of stable isotopes can be calculated via the generation of gridded isotopic data sets. Several methods have been proposed for this purpose. In this work a methodology is proposed for the development of 10'x 10' gridded isotopic data from precipitation in the central and eastern Mediterranean. Statistical models are developed taking into account geographical and meteorological parameters as regressors. The residuals are interpolated onto the grid using ordinary kriging and thin plate splines. The result is added to the model grids, to obtain the final isotopic gridded data sets. Models are evaluated using an independent data set. the overall performance of the procedure is satisfactory and the obtained gridded data reproduce the isotopic parameters successfully. (author)

  14. Development and Evaluation of a Methodology for the Generation of Gridded Isotopic Datasets

    Argiriou, A.A.; Salamalikis, V; Lykoudis, S.P.

    2013-01-01

    The accurate knowledge of the spatial distribution of stable isotopes in precipitation is necessary for several applications. Since the number of rain sampling stations is small and unevenly distributed around the globe, the global distribution of stable isotopes can be calculated via the generation of gridded isotopic data sets. Several methods have been proposed for this purpose. In this work a methodology is proposed for the development of 10'x 10' gridded isotopic data from precipitation in the central and eastern Mediterranean. Statistical models are developed taking into account geographical and meteorological parameters as regressors. The residuals are interpolated onto the grid using ordinary kriging and thin plate splines. The result is added to the model grids, to obtain the final isotopic gridded data sets. Models are evaluated using an independent data set. the overall performance of the procedure is satisfactory and the obtained gridded data reproduce the isotopic parameters successfully. (author)

  15. Assessing Organizational Capabilities: Reviewing and Guiding the Development of Maturity Grids

    Maier, Anja; Moultrie, James; Clarkson, P John

    2012-01-01

    Managing and improving organizational capabilities is a significant and complex issue for many companies. To support management and enable improvement, performance assessments are commonly used. One way of assessing organizational capabilities is by means of maturity grids. Whilst maturity grids...... than twenty maturity grids places particular emphasis on embedded assumptions about organizational change in the formulation of the maturity ratings. The suggested roadmap encompasses four phases: planning, development, evaluation and maintenance. Each phase discusses a number of decision points...

  16. Mini-grids for rural electrification of developing countries analysis and case studies from South Asia

    Bhattacharyya, Subhes C

    2014-01-01

    In recognition of the fact that billions of people in the developing world do not have access to clean energies, the United Nations launched the Sustainable Energy for All Initiative to achieve universal energy access by 2030. Although electricity grid extension remains the most prevalent way of providing access, it is now recognized that the central grid is unlikely to reach many remote areas in the near future. At the same time, individual solutions like solar home systems tend to provide very limited services to consumers. Mini-grids offer an alternative by combining the benefits of a grid-

  17. Sharing lessons learned on developing and operating smart grid pilots with households

    Kobus, C.B.A.; Klaassen, E.A.M.; Kohlmann, J.; Knigge, J.D.; Boots, S.

    2013-01-01

    Today, technology is still leading Smart Grid development. Nevertheless, the awareness that it should be a multidisciplinary effort to foster public acceptance and even desirability of Smart Grids is increasing. This paper illustrates the added value of a multidisciplinary approach by sharing the

  18. Mini-grid for sustainable integrated coastal development

    Bala, B.K.; Islam, M.M.

    2005-01-01

    Power grid cannot reach everywhere. Yet there are alternatives. Renewable energy can offer an ideal source of electricity for the communities far from a grid- on an island, or other isolated situations. Design and economics of a solar-diesel hybrid mini-grid system for 132 families in an isolated island-Sandwip are presented. The electrical load is considered based on the local needs and the electrical load demand is 20 kWh. The sizing of the hybrid system consists of 31 solar modules, 10 number of 24 V batteries, 2 Inverters having a total capacity of 24 kW, 24 V DC/220 V AC. A diesel generator set of 10 kW capacity is selected for back up during shortfall. The life cycle cost (LCC) is estimated and LCC is found to be Tk.15.51 / kWh compared to electricity price of Tk.4.00/kWh. Finally, the sustainability of solar-diesel hybrid mini-grid for an isolated island -Sandwip is discussed. (author)

  19. Application of smart grid technologies in developing areas

    Klaassen, E.A.M.; Asare-Bediako, B.; Kling, W.L.; Balkema, A.J.

    2013-01-01

    The United Nations has set the ambitious goal of assuring universal access to modern energy by 2030. Nowadays there are a lot of technical opportunities available to achieve these goals in an efficient way using smart grid technologies. However the extent to which these technologies are being

  20. Development and verification of remote research environment based on 'Fusion research grid'

    Iba, Katsuyuki; Ozeki, Takahisa; Totsuka, Toshiyuki; Suzuki, Yoshio; Oshima, Takayuki; Sakata, Shinya; Sato, Minoru; Suzuki, Mitsuhiro; Hamamatsu, Kiyotaka; Kiyono, Kimihiro

    2008-01-01

    'Fusion research grid' is a concept that unites scientists and let them collaborate effectively against their difference in time zone and location in a nuclear fusion research. Fundamental technologies of 'Fusion research grid' have been developed at JAEA in the VizGrid project under the e-Japan project at the Ministry of Education, Culture, Sports, Science and Technology (MEXT). We are conscious of needs to create new systems that assist researchers with their research activities because remote collaborations have been increasing in international projects. Therefore we have developed prototype remote research environments for experiments, diagnostics, analyses and communications based on 'Fusion research grid'. All users can access these environments from anywhere because 'Fusion research grid' does not require a closed network like Super SINET to maintain security. The prototype systems were verified in experiments at JT-60U and their availability was confirmed

  1. Development of a large scale Chimera grid system for the Space Shuttle Launch Vehicle

    Pearce, Daniel G.; Stanley, Scott A.; Martin, Fred W., Jr.; Gomez, Ray J.; Le Beau, Gerald J.; Buning, Pieter G.; Chan, William M.; Chiu, Ing-Tsau; Wulf, Armin; Akdag, Vedat

    1993-01-01

    The application of CFD techniques to large problems has dictated the need for large team efforts. This paper offers an opportunity to examine the motivations, goals, needs, problems, as well as the methods, tools, and constraints that defined NASA's development of a 111 grid/16 million point grid system model for the Space Shuttle Launch Vehicle. The Chimera approach used for domain decomposition encouraged separation of the complex geometry into several major components each of which was modeled by an autonomous team. ICEM-CFD, a CAD based grid generation package, simplified the geometry and grid topology definition by provoding mature CAD tools and patch independent meshing. The resulting grid system has, on average, a four inch resolution along the surface.

  2. Development of Phase Lock Loop System for Synchronisation of a Hybrid System with the Grid

    A. S. Abubakar

    2016-06-01

    Full Text Available Phase locked loop (PLL is an important part of the control unit of the grid connected power converter. The method of zero crossing detection (ZCD does not produce accurate phase information when grid is non-ideal. In this work, a synchronous reference frame (SRF PLL method to obtain accurate phase information when the grid voltages are unbalanced is proposed. The performances of the PLL have been verified for ideal and abnormal grid conditions such as unbalance, voltage sag, faults condition etc. Based on the results obtained, the developed PLL gives better fault ride when unbalances in the three phase input signals are overall handled well by the PLL system as it locks the two signal back within the first cycle. It also overcomes a phase jump after 5 milli-seconds from the time the fault was introduced and performs better tracking of the grid voltage and that of the renewable energy source.

  3. Development of Phase Lock Loop System for Synchronisation of a Hybrid System with the Grid

    A. S. Abubakar

    2016-12-01

    Full Text Available Phase locked loop (PLL is an important part of the control unit of the grid connected power converter. The method of zero crossing detection (ZCD does not produce accurate phase information when grid is non-ideal. In this work, a synchronous reference frame (SRF PLL method to obtain accurate phase information when the grid voltages are unbalanced is proposed. The performances of the PLL have been verified for ideal and abnormal grid conditions such as unbalance, voltage sag, faults condition etc. Based on the results obtained, the developed PLL gives better fault ride when unbalances in the three phase input signals are overall handled well by the PLL system as it locks the two signal back within the first cycle. It also overcomes a phase jump after 5 milli-seconds from the time the fault was introduced and performs better tracking of the grid voltage and that of the renewable energy source.

  4. Schnek: A C++ library for the development of parallel simulation codes on regular grids

    Schmitz, Holger

    2018-05-01

    A large number of algorithms across the field of computational physics are formulated on grids with a regular topology. We present Schnek, a library that enables fast development of parallel simulations on regular grids. Schnek contains a number of easy-to-use modules that greatly reduce the amount of administrative code for large-scale simulation codes. The library provides an interface for reading simulation setup files with a hierarchical structure. The structure of the setup file is translated into a hierarchy of simulation modules that the developer can specify. The reader parses and evaluates mathematical expressions and initialises variables or grid data. This enables developers to write modular and flexible simulation codes with minimal effort. Regular grids of arbitrary dimension are defined as well as mechanisms for defining physical domain sizes, grid staggering, and ghost cells on these grids. Ghost cells can be exchanged between neighbouring processes using MPI with a simple interface. The grid data can easily be written into HDF5 files using serial or parallel I/O.

  5. Laboratory infrastructure driven key performance indicator development using the smart grid architecture model

    Syed, Mazheruddin H.; Guillo-Sansano, Efren; Blair, Steven M.

    2017-01-01

    This study presents a methodology for collaboratively designing laboratory experiments and developing key performance indicators for the testing and validation of novel power system control architectures in multiple laboratory environments. The contribution makes use of the smart grid architecture...

  6. Automated tools and techniques for distributed Grid Software Development of the testbed infrastructure

    Aguado Sanchez, C

    2007-01-01

    Grid technology is becoming more and more important as the new paradigm for sharing computational resources across different organizations in a secure way. The great powerfulness of this solution, requires the definition of a generic stack of services and protocols and this is the scope of the different Grid initiatives. As a result of international collaborations for its development, the Open Grid Forum created the Open Grid Services Architecture (OGSA) which aims to define the common set of services that will enable interoperability across the different implementations. This master thesis has been developed in this framework, as part of the two European-funded projects ETICS and OMII-Europe. The main objective is to contribute to the design and maintenance of large distributed development projects with the automated tool that enables to implement Software Engineering techniques oriented to achieve an acceptable level of quality at the release process. Specifically, this thesis develops the testbed concept a...

  7. Policy incentives and grid-connected photovoltaics system development in China

    Wang Jing; Xu Yugao

    2007-07-01

    China has made considerable progress in solar PV generation technology. However, compared with conventional generation technologies or even other renewables such as wind and biomass, grid-connected PV technology is in its early stage and has not reached an adequate level of economic performance. Therefore, policy incentives will play important roles in attracting more social investments to facilitate the development of grid-connected PV generation. This paper is focused on analyzing the role of incentive policies in enhancing the market competitiveness of grid-connected solar PV systems in the context of China with an economic model and some policy suggestions are given based on simulation modeling efforts. (auth)

  8. Rural water supply and sanitation (RWSS) coverage in Swaziland: Toward achieving millennium development goals

    Mwendera, E. J.

    An assessment of rural water supply and sanitation (RWSS) coverage in Swaziland was conducted in 2004/2005 as part of the Rural Water Supply and Sanitation Initiative (RWSSI). The initiative was developed by the African Development Bank with the aim of implementing it in the Regional Member Countries (RMCs), including Swaziland. Information on the RWSS sector programmes, costs, financial requirements and other related activities was obtained from a wide range of national documents, including sector papers and project files and progress reports. Interviews were held with staff from the central offices and field stations of Government of Swaziland (GOS) ministries and departments, non-governmental organizations (NGOs), bilateral and multilateral external support agencies, and private sector individuals and firms with some connection to the sector and/or its programmes. The assessment also involved field visits to various regions in order to obtain first hand information about the various technologies and institutional structures used in the provision of water supplies and sanitation services in the rural areas of the country. The results showed that the RWSS sector has made significant progress towards meeting the national targets of providing water and sanitation to the entire rural population by the year 2022. The assessment indicated that rural water supply coverage was 56% in 2004 while sanitation coverage was 63% in the same year. The results showed that there is some decline in the incidence of water-related diseases, such as diarrhoeal diseases, probably due to improved water supply and sanitation coverage. The study also showed that, with adequate financial resources, Swaziland is likely to achieve 100% coverage of both water supply and sanitation by the year 2022. It was concluded that in achieving its own national goals Swaziland will exceed the Millennium Development Goals (MDGs). However, such achievement is subject to adequate financial resources being

  9. Experimental Simulation of Flow-Induced Vibration for Developing a Grid-to-Rod Fretting Model

    Lee, Youngho; Kim, Hyungkyu; Kang, Heungseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-05-15

    GTRF margin was calculated based on the fuel reliabilities program of operating power plants. But they have not accumulated sufficient experience under challenging operating conditions to be considered proven solutions. In addition, GTRF behaviors were significantly differed according to the plant types, operating condition and fuel types. So, analytical methods to resolve GTRF degradations are considered as difficult procedures for actual application. One of the most important problems is that it is difficult to evaluate the GTRF resistance of new spacer grid under operating power plant condition. Up to now, as a consequence, compliance with the fretting wear limit (typically 10% of the cladding thickness) is checked a posteriori, through post-irradiation examination. Therefore, in this study, rod simulation method for determining GTRF resistance of new spacer grid was proposed with a specially designed wear tester. This simulator enables us to examine the spacer grid shape effect under relatively short development period. In addition, for developing GTRF model, flow-induced vibration (FIV) was measured with different major variables such as GTR clearance, flow rate, etc. Fretting wear tests of nuclear fuel rods (i. e. grid-to-rod fretting) have been performed to examine the flow rate effect by using a specially designed test section with a simulated primary coolant. Based on above results, developed FIV-wear simulator could be effective to examine the spacer grid shape effect with short development period. Further study will be discussed on the GTR clearance effect with various spacer grid shapes.

  10. Design and Development of Fire Gridding Platform Based on Internet of Things

    Wei San-Xi

    2016-01-01

    Full Text Available This article describes the construction background about fire gridding platform, reviews the research and progress in fire Internet of Things and fire gridding. The platform includes perception / execution layer, field control layer, network layer, center platform layer and application layer, which provide a good bonding about site control and remote monitoring. This article supplies a detail design for the main functions of application and task flow of fire hazard investigation. At the same time, a digital management platform was developed.

  11. Power grid operation risk management: V2G deployment for sustainable development

    Haddadian, Ghazale J.

    The production, transmission, and delivery of cost--efficient energy to supply ever-increasing peak loads along with a quest for developing a low-carbon economy require significant evolutions in the power grid operations. Lower prices of vast natural gas resources in the United States, Fukushima nuclear disaster, higher and more intense energy consumptions in China and India, issues related to energy security, and recent Middle East conflicts, have urged decisions makers throughout the world to look into other means of generating electricity locally. As the world look to combat climate changes, a shift from carbon-based fuels to non-carbon based fuels is inevitable. However, the variability of distributed generation assets in the electricity grid has introduced major reliability challenges for power grid operators. While spearheading sustainable and reliable power grid operations, this dissertation develops a multi-stakeholder approach to power grid operation design; aiming to address economic, security, and environmental challenges of the constrained electricity generation. It investigates the role of Electric Vehicle (EV) fleets integration, as distributed and mobile storage assets to support high penetrations of renewable energy sources, in the power grid. The vehicle-to-grid (V2G) concept is considered to demonstrate the bidirectional role of EV fleets both as a provider and consumer of energy in securing a sustainable power grid operation. The proposed optimization modeling is the application of Mixed-Integer Linear Programing (MILP) to large-scale systems to solve the hourly security-constrained unit commitment (SCUC) -- an optimal scheduling concept in the economic operation of electric power systems. The Monte Carlo scenario-based approach is utilized to evaluate different scenarios concerning the uncertainties in the operation of power grid system. Further, in order to expedite the real-time solution of the proposed approach for large-scale power systems

  12. ENHANCED IMMUNIZATION COVERAGE THROUGH INTERVENTIONS FOR CHILDHOOD CLUSTER DISEASES IN DEVELOPING COUNTRIES.

    Mureed, Sheh; Somronghtong, Ratana; Kumar, Ramesh; Ghaffar, Abdul; Chapman, Robert S

    2015-01-01

    Globally immunisation has to be considered as a most effective and efficient public health intervention to reduce morbidity and mortality among children. Most of the children from developing countries are still not fully immunized due to multiple factors including lack of interventions, awareness, and financial constraints and due to limited resource. Conversely, this review has identified the effectiveness of interventions to increase the immunisation coverage among children of developing countries. Systematic review by using PRISMA statement ("preferred reporting items for systematic reviews and meta-analyses") has been conducted in English. published articles on Pub Med, Scopus, Cochrane, Medline and ISI by searching keywords like immunizations, childhood vaccination and developing countries has been accessed. Only randomised controlled trial and quasi-experimental studies designs were included in the final analysis based on quality assessment by adopting the Down and Black checklist and finally pooled analysis was done by random effect model. This systematic review has been approved and registered by University of York. A total of 16,570 published articles were accessed and finally 10 fulfilled our criteria that were analysed and interpreted. It demonstrated that the interventions has shown significantly increase vaccine coverage for childhood cluster diseases (OR 2.136 and p 0.05) and full vaccination schedule (OR 1.342 and p>0.05). Systematic review has concluded that the professional interventions are an effective while in improving the child immunisation coverage for cluster diseases in developing countries, major effect on DTP an.d measles.

  13. AN ANALYSIS OF DEVELOPMENT MECHANISM OF CHINA’S SMART GRID

    Xiaoling Yuan

    2014-04-01

    Full Text Available Through the perspectives of socio-technical systems, this paper summarizes characteristics of China’s smart grid and finds the influencing factors of development mechanism. We find that China’s smart grid featured by company-led, government striven to develop renewable energy, indigenous and multinational corporation both-driven, consumer-participated passively approach appears to differ from development pathways compared with other Western counties such as US, South Korea and Japan, then we assess strength and weakness of the development mechanism from three aspects including government, industrial and consumer. From a long run, China should establish flattening social innovation organization with government-led, stakeholders-participated jointly, then enact national blue planning, laws and technical standards, at last, develop ultra high voltage properly and actively promote development of distribution generation and micro grid.

  14. Development of coverage with evidence development for medical technologies in Switzerland from 1996 to 2012.

    Brügger, Urs; Ruckstuhl, Andreas; Horisberger, Bruno; Gratwohl, Alois

    2014-07-01

    The aim of this study was to assess incidence, time frame, and outcome of "Coverage with Evidence Development" (CED) decisions in the Swiss Basic Health Insurance scheme. Analysis of all controversial medical technologies submitted to review by the Swiss Federal Office of Public Health (FOPH) from 1996 to 2012 with focus on decisions with constraints. Description of types of technology, type of initial decision, duration of evaluation period, final decision, and search for potential factors associated with changes over time. Forty-five (37.5 percent) of 120 controversial health technologies were classified as "yes, in evaluation, reimbursed" for a certain period of time and thirty-five (29.2 percent) as "no, in evaluation, not reimbursed" by the Federal Department of Home Affairs from 1996 to 2012. The rate of CED decisions ranged between zero and nine per year and was influenced by type of technology and calendar year. Forty-four of forty-five decisions were subject to further restrictions, to a "center or a specialist" (76 percent), "indications" (49 percent), "registry" (31 percent), or "other" (49 percent). The time to a final decision ranged from 1.5 to 11 years (median, 6 years). No factors associated with initial decision and final outcome could be identified. CED as a reality in Switzerland might have enabled patients to obtain access to promising technologies early in their life cycle. CED might have acted as a trigger to a successful implementation of a comprehensive national registry. The lack of qualitative data stresses the urgent need for evaluation of the HTA decisions and their impact on patient outcome and costs.

  15. Potential carbon impacts of smart grid development in six European countries

    Darby, S. [Lower Carbon Futures, Environmental Change Institute, Oxford University, South Parks Road, Oxford, OX1 3QY (United Kingdom); Stroembaeck, J. [VaasaETT Global Energy Think Tank, Itaemerenkatu 5, 2nd floor, 00180 Helsinki (Finland); Wilks, M. [Poyry Management Consulting, King Charles House, Park End Street, Oxford, OX1 1JD (United Kingdom)

    2013-11-15

    This paper examines reports on work carried out for the European Commission to devise a methodology for estimating the potential impact of smart grids on carbon emissions. It first identifies functionalities that enable carbon benefits to be realised. Each functionality on the demand side is assumed to be mirrored on the supply side, as when dynamic peak shifting 'replaces' flexible peak generation. Metrics are developed to describe the state of markets and to estimate customer response to demand response initiatives. Quantitative analysis identifies where the greatest scope for emissions reduction lies, while qualitative assessment indicates where to expect more or less impact from smart grid deployment. The impact of smart grid functionalities by 2020 is then modelled for six representative EU markets (Austria, France, Germany, Great Britain, Portugal and Spain), using a detailed pan-European market model and also a high-level ancillary services model. Three scenarios are developed: baseline, in which no smart grid rollout is assumed; feasible, based on what could be achievable in the light of technology developments and with supportive legislation; and an intermediate expected scenario, in which new technologies are introduced but nothing else changes. The findings indicate the potential for emissions reductions by 2020. They also show that the potential is very unlikely to be reached without regulatory support for user engagement in demand response and demand reduction, along with enabling technology and programmes. Development of regulatory frameworks that allow full advantage to be taken of the new technologies emerges as a challenge for smart grid development.

  16. Review of the development of multi-terminal HVDC and DC power grid

    Chen, Y. X.

    2017-11-01

    Traditional power equipment, power-grid structures, and operation technology are becoming increasingly powerless with the large-scale renewable energy access to the grid. Thus, we must adopt new technologies, new equipment, and new grid structure to satisfy future requirements in energy patterns. Accordingly, the multiterminal direct current (MTDC) transmission system is receiving increasing attention. This paper starts with a brief description of current developments in MTDC worldwide. The MTDC project, which has been placed into practical operation, is introduced by the Italian-Corsica-Sardinian three-terminal high-voltage DC (HVDC) project. We then describe the basic characteristics and regulations of multiterminal DC transmission. The current mainstream of several control methods are described. In the third chapter, the key to the development of MTDC system or hardware and software technology that restricts the development of multiterminal DC transmission is discussed. This chapter focuses on the comparison of double-ended HVDC and multiterminal HVDC in most aspects and subsequently elaborates the key and difficult point of MTDC development. Finally, this paper summarizes the prospect of a DC power grid. In a few decades, China can build a strong cross-strait AC-DC hybrid power grid.

  17. OpenADR Open Source Toolkit: Developing Open Source Software for the Smart Grid

    McParland, Charles

    2011-02-01

    Demand response (DR) is becoming an increasingly important part of power grid planning and operation. The advent of the Smart Grid, which mandates its use, further motivates selection and development of suitable software protocols to enable DR functionality. The OpenADR protocol has been developed and is being standardized to serve this goal. We believe that the development of a distributable, open source implementation of OpenADR will benefit this effort and motivate critical evaluation of its capabilities, by the wider community, for providing wide-scale DR services

  18. Development and Testing of a Prototype Grid-Tied Photovoltaic Power System

    Eichenberg, Dennis J.

    2009-01-01

    The NASA Glenn Research Center (GRC) has developed and tested a prototype 2 kW DC grid-tied photovoltaic (PV) power system at the Center. The PV system has generated in excess of 6700 kWh since operation commenced in July 2006. The PV system is providing power to the GRC grid for use by all. Operation of the prototype PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provide valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the prototype PV system, additional PV power system expansion at GRC is under consideration. The prototype grid-tied PV power system was successfully designed and developed which served to validate the basic principles described, and the theoretical work that was performed. The report concludes that grid-tied photovoltaic power systems are reliable, maintenance free, long life power systems, and are of significant value to NASA and the community.

  19. Coverage of private sector community midwife services in rural Punjab, Pakistan: development and demand.

    Mumtaz, Zubia; Levay, Adrienne V; Jhangri, Gian S; Bhatti, Afshan

    2015-11-25

    In 2007, the Government of Pakistan introduced a new cadre of community midwives (CMWs) to address low skilled birth attendance rates in rural areas; this workforce is located in the private-sector. There are concerns about the effectiveness of the programme for increasing skilled birth attendance as previous experience from private-sector programmes has been sub-optimal. Indonesia first promoted private sector midwifery care, but the initiative failed to provide universal coverage and reduce maternal mortality rates. A clustered, stratified survey was conducted in the districts of Jhelum and Layyah, Punjab. A total of 1,457 women who gave birth in the 2 years prior to the survey were interviewed. χ(2) analyses were performed to assess variation in coverage of maternal health services between the two districts. Logistic regression models were developed to explore whether differentials in coverage between the two districts could be explained by differential levels of development and demand for skilled birth attendance. Mean cost of childbirth care by type of provider was also calculated. Overall, 7.9% of women surveyed reported a CMW-attended birth. Women in Jhelum were six times more likely to report a CMW-attended birth than women in Layyah. The mean cost of a CMW-attended birth compared favourably with a dai-attended birth. The CMWs were, however, having difficulty garnering community trust. The majority of women, when asked why they had not sought care from their neighbourhood CMW, cited a lack of trust in CMWs' competency and that they wanted a different provider. The CMWs have yet to emerge as a significant maternity care provider in rural Punjab. Levels of overall community development determined uptake and hence coverage of CMW care. The CMWs were able to insert themselves into the maternal health marketplace in Jhelum because of an existing demand. A lower demand in Layyah meant there was less 'space' for the CMWs to enter the market. To ensure universal

  20. A Testbed Environment for Buildings-to-Grid Cyber Resilience Research and Development

    Sridhar, Siddharth; Ashok, Aditya; Mylrea, Michael E.; Pal, Seemita; Rice, Mark J.; Gourisetti, Sri Nikhil Gup

    2017-09-19

    The Smart Grid is characterized by the proliferation of advanced digital controllers at all levels of its operational hierarchy from generation to end consumption. Such controllers within modern residential and commercial buildings enable grid operators to exercise fine-grained control over energy consumption through several emerging Buildings-to-Grid (B2G) applications. Though this capability promises significant benefits in terms of operational economics and improved reliability, cybersecurity weaknesses in the supporting infrastructure could be exploited to cause a detrimental effect and this necessitates focused research efforts on two fronts. First, the understanding of how cyber attacks in the B2G space could impact grid reliability and to what extent. Second, the development and validation of cyber-physical application-specific countermeasures that are complementary to traditional infrastructure cybersecurity mechanisms for enhanced cyber attack detection and mitigation. The PNNL B2G testbed is currently being developed to address these core research needs. Specifically, the B2G testbed combines high-fidelity buildings+grid simulators, industry-grade building automation and Supervisory Control and Data Acquisition (SCADA) systems in an integrated, realistic, and reconfigurable environment capable of supporting attack-impact-detection-mitigation experimentation. In this paper, we articulate the need for research testbeds to model various B2G applications broadly by looking at the end-to-end operational hierarchy of the Smart Grid. Finally, the paper not only describes the architecture of the B2G testbed in detail, but also addresses the broad spectrum of B2G resilience research it is capable of supporting based on the smart grid operational hierarchy identified earlier.

  1. Developing infrastructure for interconnecting transportation network and electric grid.

    2011-09-01

    This report is primarily focused on the development of mathematical models that can be used to : support decisions regarding a charging station location and installation problem. The major parts : of developing the models included identification of t...

  2. e-Portfolios for Learning and Development: without constant internet or electrical grid access

    Casey, John; Calverley, Gayle; Greller, Wolfgang; Uhomoibhi, James

    2011-01-01

    Casey, J., Calverley, G., Greller, W., & Uhomoibhi, J. (2010, 26-28 May). e-Portfolios for Learning and Development: without constant internet or electrical grid access. Presentation at the 5th International Conference on ICT for Development, Education, and Training - eLearning Africa, Lusaka,

  3. Development of 3-D Flow Analysis Code for Fuel Assembly using Unstructured Grid System

    Myong, Hyon Kook; Kim, Jong Eun; Ahn, Jong Ki; Yang, Seung Yong [Kookmin Univ., Seoul (Korea, Republic of)

    2007-03-15

    The flow through a nuclear rod bundle with mixing vanes are very complex and required a suitable turbulence model to be predicted accurately. Final objective of this study is to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system. In order to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system, the following researches are made: - Development of numerical algorithm for CFD code's solver - Grid and geometric connectivity data - Development of software(PowerCFD code) for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system - Modulation of software(PowerCFD code) - Development of turbulence model - Development of analysis module of RANS/LES hybrid models - Analysis of turbulent flow and heat transfer - Basic study on LES analysis - Development of main frame on pre/post processors based on GUI - Algorithm for fully-developed flow.

  4. Development of 3-D Flow Analysis Code for Fuel Assembly using Unstructured Grid System

    Myong, Hyon Kook; Kim, Jong Eun; Ahn, Jong Ki; Yang, Seung Yong

    2007-03-01

    The flow through a nuclear rod bundle with mixing vanes are very complex and required a suitable turbulence model to be predicted accurately. Final objective of this study is to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system. In order to develop a CFD code for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system, the following researches are made: - Development of numerical algorithm for CFD code's solver - Grid and geometric connectivity data - Development of software(PowerCFD code) for fluid flow and heat transfer analysis in a nuclear fuel assembly using unstructured grid system - Modulation of software(PowerCFD code) - Development of turbulence model - Development of analysis module of RANS/LES hybrid models - Analysis of turbulent flow and heat transfer - Basic study on LES analysis - Development of main frame on pre/post processors based on GUI - Algorithm for fully-developed flow

  5. Building a model: developing genomic resources for common milkweed (Asclepias syriaca with low coverage genome sequencing

    Weitemier Kevin

    2011-05-01

    Full Text Available Abstract Background Milkweeds (Asclepias L. have been extensively investigated in diverse areas of evolutionary biology and ecology; however, there are few genetic resources available to facilitate and compliment these studies. This study explored how low coverage genome sequencing of the common milkweed (Asclepias syriaca L. could be useful in characterizing the genome of a plant without prior genomic information and for development of genomic resources as a step toward further developing A. syriaca as a model in ecology and evolution. Results A 0.5× genome of A. syriaca was produced using Illumina sequencing. A virtually complete chloroplast genome of 158,598 bp was assembled, revealing few repeats and loss of three genes: accD, clpP, and ycf1. A nearly complete rDNA cistron (18S-5.8S-26S; 7,541 bp and 5S rDNA (120 bp sequence were obtained. Assessment of polymorphism revealed that the rDNA cistron and 5S rDNA had 0.3% and 26.7% polymorphic sites, respectively. A partial mitochondrial genome sequence (130,764 bp, with identical gene content to tobacco, was also assembled. An initial characterization of repeat content indicated that Ty1/copia-like retroelements are the most common repeat type in the milkweed genome. At least one A. syriaca microread hit 88% of Catharanthus roseus (Apocynaceae unigenes (median coverage of 0.29× and 66% of single copy orthologs (COSII in asterids (median coverage of 0.14×. From this partial characterization of the A. syriaca genome, markers for population genetics (microsatellites and phylogenetics (low-copy nuclear genes studies were developed. Conclusions The results highlight the promise of next generation sequencing for development of genomic resources for any organism. Low coverage genome sequencing allows characterization of the high copy fraction of the genome and exploration of the low copy fraction of the genome, which facilitate the development of molecular tools for further study of a target species

  6. Building a model: developing genomic resources for common milkweed (Asclepias syriaca) with low coverage genome sequencing.

    Straub, Shannon C K; Fishbein, Mark; Livshultz, Tatyana; Foster, Zachary; Parks, Matthew; Weitemier, Kevin; Cronn, Richard C; Liston, Aaron

    2011-05-04

    Milkweeds (Asclepias L.) have been extensively investigated in diverse areas of evolutionary biology and ecology; however, there are few genetic resources available to facilitate and compliment these studies. This study explored how low coverage genome sequencing of the common milkweed (Asclepias syriaca L.) could be useful in characterizing the genome of a plant without prior genomic information and for development of genomic resources as a step toward further developing A. syriaca as a model in ecology and evolution. A 0.5× genome of A. syriaca was produced using Illumina sequencing. A virtually complete chloroplast genome of 158,598 bp was assembled, revealing few repeats and loss of three genes: accD, clpP, and ycf1. A nearly complete rDNA cistron (18S-5.8S-26S; 7,541 bp) and 5S rDNA (120 bp) sequence were obtained. Assessment of polymorphism revealed that the rDNA cistron and 5S rDNA had 0.3% and 26.7% polymorphic sites, respectively. A partial mitochondrial genome sequence (130,764 bp), with identical gene content to tobacco, was also assembled. An initial characterization of repeat content indicated that Ty1/copia-like retroelements are the most common repeat type in the milkweed genome. At least one A. syriaca microread hit 88% of Catharanthus roseus (Apocynaceae) unigenes (median coverage of 0.29×) and 66% of single copy orthologs (COSII) in asterids (median coverage of 0.14×). From this partial characterization of the A. syriaca genome, markers for population genetics (microsatellites) and phylogenetics (low-copy nuclear genes) studies were developed. The results highlight the promise of next generation sequencing for development of genomic resources for any organism. Low coverage genome sequencing allows characterization of the high copy fraction of the genome and exploration of the low copy fraction of the genome, which facilitate the development of molecular tools for further study of a target species and its relatives. This study represents a first

  7. Enhanced immunization coverage through interventions for childhood cluster diseases in developing countries

    Mureed, S.; Somronghtong, R.; Kumar, R.

    2015-01-01

    Globally immunisation has to be considered as a most effective and efficient public health intervention to reduce morbidity and mortality among children. Most of the children from developing countries are still not fully immunized due to multiple factors including lack of interventions, awareness, and financial constraints and due to limited resource. Conversely, this review has identified the effectiveness of interventions to increase the immunisation coverage among children of developing countries. Methods: Systematic review by using PRISMA statement (preferred reporting items for systematic reviews and meta-analyses) has been conducted in English published articles on Pub Med, Scopus, Cochrane, Medline and ISI by searching keywords like immunizations, childhood vaccination and developing countries has been accessed. Only randomised controlled trial and quasi-experimental studies designs were included in the final analysis based on quality assessment by adopting the Down and Black checklist and finally pooled analysis was done by random effect model. This systematic review has been approved and registered by University of York. Results: A total of 16,570 published articles were accessed and finally 10 fulfilled our criteria that were analysed and interpreted. It demonstrated that the interventions has shown significantly increase vaccine coverage for childhood cluster diseases (OR 2.136 and p <0.05).Furthermore, it has been proved that an effect was more prominent for DTP (OR 2.397 and p<0.05) and measles (OR 2.628 and p<0.05), not as much for polio (OR 2.284 and p>0.05) and full vaccination schedule (OR 1.342 and p>0.05). Conclusions: Systematic review has concluded that the professional interventions are an effective while in improving the child immunisation coverage for cluster diseases in developing countries, major effect on DTP and measles. (author)

  8. Functional coverages

    Donchyts, G.; Baart, F.; Jagers, H.R.A.; Van Dam, A.

    2011-01-01

    A new Application Programming Interface (API) is presented which simplifies working with geospatial coverages as well as many other data structures of a multi-dimensional nature. The main idea extends the Common Data Model (CDM) developed at the University Corporation for Atmospheric Research

  9. OGC and Grid Interoperability in enviroGRIDS Project

    Gorgan, Dorian; Rodila, Denisa; Bacu, Victor; Giuliani, Gregory; Ray, Nicolas

    2010-05-01

    EnviroGRIDS (Black Sea Catchment Observation and Assessment System supporting Sustainable Development) [1] is a 4-years FP7 Project aiming to address the subjects of ecologically unsustainable development and inadequate resource management. The project develops a Spatial Data Infrastructure of the Black Sea Catchment region. The geospatial technologies offer very specialized functionality for Earth Science oriented applications as well as the Grid oriented technology that is able to support distributed and parallel processing. One challenge of the enviroGRIDS project is the interoperability between geospatial and Grid infrastructures by providing the basic and the extended features of the both technologies. The geospatial interoperability technology has been promoted as a way of dealing with large volumes of geospatial data in distributed environments through the development of interoperable Web service specifications proposed by the Open Geospatial Consortium (OGC), with applications spread across multiple fields but especially in Earth observation research. Due to the huge volumes of data available in the geospatial domain and the additional introduced issues (data management, secure data transfer, data distribution and data computation), the need for an infrastructure capable to manage all those problems becomes an important aspect. The Grid promotes and facilitates the secure interoperations of geospatial heterogeneous distributed data within a distributed environment, the creation and management of large distributed computational jobs and assures a security level for communication and transfer of messages based on certificates. This presentation analysis and discusses the most significant use cases for enabling the OGC Web services interoperability with the Grid environment and focuses on the description and implementation of the most promising one. In these use cases we give a special attention to issues such as: the relations between computational grid and

  10. Smart grids or smart users? Involving users in developing a low carbon electricity economy

    Verbong, Geert P.J.; Beemsterboer, Sjouke; Sengers, Frans

    2013-01-01

    This article analyses practices and perceptions of stakeholders on including users in smart grids experiments in the Netherlands. In-depth interviews have been conducted and smart grid projects have been analysed, using a Strategic Niche Management framework. The analysis shows that there is a clear trend to pay more attention to users in new smart grid projects. However, too much focus on technology and economic incentives can become a barrier. Some institutional barriers have been identified. New innovative business models should be developed to explore different options to involve users. The many pilot and demonstration projects that are taking shape or are being planned offer an excellent opportunity for such an exploration. Learning on the social dimensions of smart grids, and the international exchange of experiences can prevent a premature lock-in in a particular pathway. - Highlights: ► State of the art of smart grids experiments in the Netherlands. ► Focus on role and position of users. ► Trend is to active involvement of users. ► Several barriers have been identified.

  11. Development of Mitsubishi high thermal performance grid 1 - CFD applicability for thermal hydraulic design

    Ikeda, K.; Hoshi, M.

    2001-01-01

    Mitsubishi applied the Computational Fluid Dynamics (CFD) evaluation method for designing of the new lower pressure loss and higher DNB performance grid spacer. Reduction of pressure loss of the grid has been estimated by CFD. Also, CFD has been developed as a design tool to predict the coolant mixing ability of vane structures, that is to compare the relative peak spot temperatures around fuel rods at the same heat flux condition. These evaluations have been reflected to the new grid spacer design. The prototype grid was manufactured and some flow tests were performed to examine the thermal hydraulic performance, which were predicted by CFD. The experimental data of pressure loss was in good agreement with CFD prediction. The CFD prediction of flow behaviors at downstream of the mixing vanes was verified by detail cross-flow measurements at rod gaps by the rod LDV system. It is concluded that the applicability of the CFD evaluation method for the thermal hydraulic design of the grid is confirmed. (authors)

  12. Coverage-maximization in networks under resource constraints.

    Nandi, Subrata; Brusch, Lutz; Deutsch, Andreas; Ganguly, Niloy

    2010-06-01

    Efficient coverage algorithms are essential for information search or dispersal in all kinds of networks. We define an extended coverage problem which accounts for constrained resources of consumed bandwidth B and time T . Our solution to the network challenge is here studied for regular grids only. Using methods from statistical mechanics, we develop a coverage algorithm with proliferating message packets and temporally modulated proliferation rate. The algorithm performs as efficiently as a single random walker but O(B(d-2)/d) times faster, resulting in significant service speed-up on a regular grid of dimension d . The algorithm is numerically compared to a class of generalized proliferating random walk strategies and on regular grids shown to perform best in terms of the product metric of speed and efficiency.

  13. Scientific Coverage in Community-Based Tourism: Sustainable Tourism and Strategy for Social Development

    José Álvarez-García

    2018-04-01

    Full Text Available In the last decades in developing countries, the tourism sector has been immersed in an intense process of strengthening the participation of local communities through the so-called community tourism initiatives, whose main objective is to improve the quality of life of the inhabitants of host communities, ensuring the subsistence of traditional culture. Its growing momentum as a means for sustainable tourism and a strategy for social development has generated a large amount of academic literature, and it is necessary to analyze its presence in the main multidisciplinary databases. Thus, the main purpose of our article is to show the current state of scientific production on community tourism through a bibliometric comparative study of the documents indexed in the WoS and Scopus databases, dealing with aspects such as their coverage, correlation between both bases, overlapping of documents and journals, growth, dispersion or concentration of articles, among others. For this purpose, and by means of an advanced search by terms, a representative set of 115 articles in WoS and 185 in Scopus were selected, with the time limit set in 2017. These form the ad-hoc basis of the analysis. In view of the results, it is concluded that, although WoS and Scopus databases differ in terms of scope, volume of data, and coverage policies, both information systems are complementary but not exclusive. Although the documents and the results of their analysis are in many aspects similar, Scopus has a better coverage in the specific area of community tourism due to collecting a greater number of articles, journals and signatures, and its articles receiving a greater number of citations.

  14. Planning and development of wind farms: Environmental impact and grid connection

    Clausen, Niels-Erik

    These course notes are intended for the three-week course 46200 Planning and Development of Wind Farms given by DTUWind Energy, Technical University of Denmark. The purpose of the course notes is to give an introduction to planning procedures, environmental impact assessments, and grid connection....

  15. Country-specific factors for the development of household smart grid solutions

    Christensen, Toke Haunstrup; Ascarza, Ainhoa; Throndsen, William

    The report provides an overview of relevant country-specific factors in relation to understanding the context of the development of smart grid solutions in Spain, Norway and Denmark (e.g. main characteristics of the energy system) and describes the current status of activities in relation to smart...

  16. Institutional Issues of International Power Grid Development in Northeast Asia

    Korneev, Konstantin; Maksakova, Darya; Popov, Sergei

    2018-01-01

    With regard to the initiative of "International power interconnections in northeast Asia" here examines the challenges which may hinder the establishment of a common energy system in region. The analysis is based on the APERC methodology for international energy cooperation in the APEC region, and on historical approach to the development of pricing mechanisms and policy in the European common market of electricity trade and system services. Mechanisms for the prevention and overcoming of the revealed problems of regional cooperation in the power sector are proposed.

  17. Institutional Issues of International Power Grid Development in Northeast Asia

    Korneev Konstantin

    2018-01-01

    Full Text Available With regard to the initiative of “International power interconnections in northeast Asia” here examines the challenges which may hinder the establishment of a common energy system in region. The analysis is based on the APERC methodology for international energy cooperation in the APEC region, and on historical approach to the development of pricing mechanisms and policy in the European common market of electricity trade and system services. Mechanisms for the prevention and overcoming of the revealed problems of regional cooperation in the power sector are proposed.

  18. ATLAS computing activities and developments in the Italian Grid cloud

    Rinaldi, L; Ciocca, C; K, M; Annovi, A; Antonelli, M; Martini, A; Barberis, D; Brunengo, A; Corosu, M; Barberis, S; Carminati, L; Campana, S; Di, A; Capone, V; Carlino, G; Doria, A; Esposito, R; Merola, L; De, A; Luminari, L

    2012-01-01

    The large amount of data produced by the ATLAS experiment needs new computing paradigms for data processing and analysis, which involve many computing centres spread around the world. The computing workload is managed by regional federations, called “clouds”. The Italian cloud consists of a main (Tier-1) center, located in Bologna, four secondary (Tier-2) centers, and a few smaller (Tier-3) sites. In this contribution we describe the Italian cloud facilities and the activities of data processing, analysis, simulation and software development performed within the cloud, and we discuss the tests of the new computing technologies contributing to evolution of the ATLAS Computing Model.

  19. Influencing Factors and Development Trend Analysis of China Electric Grid Investment Demand Based on a Panel Co-Integration Model

    Jinchao Li

    2018-01-01

    Full Text Available Electric grid investment demand analysis is significant to reasonably arranging construction funds for the electric grid and reduce costs. This paper used the panel data of electric grid investment from 23 provinces of China between 2004 and 2016 as samples to analyze the influence between electric grid investment demand and GDP, population scale, social electricity consumption, installed electrical capacity, and peak load based on co-integration tests. We find that GDP and peak load have positive influences on electric grid investment demand, but the impact of population scale, social electricity consumption, and installed electrical capacity on electric grid investment is not remarkable. We divide different regions in China into the eastern region, central region, and western region to analyze influence factors of electric grid investment, finally obtaining key factors in the eastern, central, and western regions. In the end, according to the analysis of key factors, we make a prediction about China’s electric grid investment for 2020 in different scenarios. The results offer a certain understanding for the development trend of China’s electric grid investment and contribute to the future development of electric grid investment.

  20. The Most Economical Mode of Power Supply for Remote and Less Developed Areas in China: Power Grid Extension or Micro-Grid?

    Sen Guo

    2017-05-01

    Full Text Available There are still residents without access to electricity in some remote and less developed areas of China, which lead to low living standards and hinder sustainable development for these residents. In order to achieve the strategic targets of solving China’s energy poverty, realizing basic energy service equalization, and comprehensively building up a moderately prosperous society, several policies have been successively promulgated in recent years, which aim to solve the electricity access issue for residents living in remote and less developed areas. It is of great importance to determine the most economical mode of power supply in remote and less developed areas, which directly affects the economic efficiency of public investment projects. Therefore, this paper focuses on how to select the most economical power supply mode for rural electrification in China. Firstly, the primary modes to supply electricity for residents living in the remote and less developed areas are discussed, which include power grid extension mode and micro-grid mode. Secondly, based on the levelized cost of electricity (LCOE technique, the life cycle economic cost accounting model for different power supply modes are built. Finally, taking a minority nationality village in Yunnan province as an example, the empirical analysis is performed, and the LCOEs of various possible modes for rural electrification are accounted. The results show that the photovoltaic (PV-based independent micro-grid system is the most economical due to the minimum LCOE, namely 0.658 RMB/kWh. However, other power supply modes have much higher LCOEs. The LCOEs of power grid extension model, wind-based independent micro-grid system and biomass-based independent micro-grid system are 1.078 RMB/kWh, 0.704 RMB/kWh and 0.885 RMB/kWh, respectively. The proposed approach is effective and practical, which can provide reference for rural electrification in China.

  1. Consumer perceptions of smart grid development: Results of a Hong Kong survey and policy implications

    Mah, Daphne Ngar-yin; Vleuten, Johannes Marinus van der; Hills, Peter; Tao, Julia

    2012-01-01

    Consumers have a major role to play in smart grid technologies which can be instrumental in addressing climate change and energy challenges. However, little is known about how consumers perceive, and how they might respond to the opportunities that smart grid technologies offer. This paper reports the results from a Hong Kong survey (n=505). It contributes to the literature by providing a better understanding of the perceptions and behaviour of electricity consumers about the possible deployment of smart grids. Our results indicate that Hong Kong consumers generally welcomed smart grid technologies and had a preference for energy saving, energy efficiency and renewable energy while they showed a high level of opposition to nuclear power. They displayed an interest in playing a much more informed and active role in energy decision-making, but they were sensitive to tariff increases. Motivations and barriers for consumers to support smart grid developments are also discussed. We conclude with a discussion of policy implications for effective consumer engagement. More policy attention is needed on demand-side measures, introducing institutional and regulatory changes, and modifying relationships between consumers, the government and utilities. - Highlights: ► Consumers have a major role in smart grid technologies. ► This paper reports findings of a Hong Kong survey on how consumers perceive and respond. ► Hong Kong consumers are interested in being informed and playing an active role in energy decision-making. ► Motivations and barriers are discussed. ► Policy recommendations for effective consumer engagement are suggested.

  2. Development and deployment of a Desktop and Mobile application on grid for GPS studie

    Ntumba, Patient; Lotoy, Vianney; Djungu, Saint Jean; Fleury, Rolland; Petitdidier, Monique; Gemünd, André; Schwichtenberg, Horst

    2013-04-01

    GPS networks for scientific studies are developed all other the world and large databases, regularly updated, like IGS are also available. Many GPS have been installed in West and Central Africa during AMMA (African Monsoon Multiplidisciplinary Analysis), IHY (International heliophysical Year)and many other projects since 2005. African scientists have been educated to use those data especially for meteorological and ionospheric studies. The annual variations of ionospheric parameters for a given station or map of a given region are very intensive computing. Then grid or cloud computing may be a solution to obtain results in a relatively short time. Real time At the University of Kinshasa the chosen solution is a grid of several PCs. It has been deployed by using Globus Toolkit on a Condor pool in order to support the processing of GPS data for ionospheric studies. To be user-friendly, graphical user interfaces(GUI) have been developed to help the user to prepare and submit jobs. One is a java GUI for desktop client, the other is an Android GUI for mobile client. The interest of a grid is the possibility to send a bunch of jobs with an adequate agent control in order to survey the job execution and result storage. After the feasibility study the grid will be extended to a larger number of PCs. Other solutions will be in parallel explored.

  3. Measurement and model development of the droplet diameter in rod bundles with spacer grids in the reactor core

    No, Hee Cheon; Lee, Eo Hwak; Yoo, Seung Hun; Jin, Hyung Gon; Kim, In Hun [KAIST, Daejeon (Korea, Republic of)

    2010-05-15

    To understand and to predict the heat transfer between superheated steam and droplets properly during reflood phase of LBLOCA of APR1400, it is very important to measure broken droplet sizes by spacer grids. A study, therefore, has been performed to investigate droplet size in rod bundles with spacer grids and to develop a spacer grid droplet size model for safety analysis codes. Experiments were conducted with liquid droplets (SMD of 300{approx}700 {mu}m) impacting on various spacer grids at air superficial velocity of 10 and 20 m/s based on FLECHT SEASET. The test channel and the grids were heated to 150 .deg. C to prevent the formation of liquid film during tests. The spacer grids were designed refer to the Korean fuel rod bundles (Korean Standard Fuel, Plus 7) of APR1400 with various blockage area ratio and grid geometries (strap thickness, mixing vane) and about 15,000 droplets were measured at upstream and downstream of the grids in 16 tests. As a result, the measurement of broken droplet size by spacer grids with photography method is presented and the droplet size model related to spacer grids as a function of blockage area ratio is suggested in this report

  4. On-grid electricity tariffs in China: Development, reform and prospects

    Ma Jinlong

    2011-01-01

    With the introduction of market-oriented measures in China's power sector in the mid-1980s, electricity sale prices to the grid companies-on-grid electricity tariffs-became the focus of the energy industry, thus affecting all related stakeholders, including fuel suppliers, power generators and end-use consumers. A number of changes have gradually been undertaken in terms of electricity tariff settings and their implementation to address specific requirements of the expansion of the power industry at each stage of its development. On-grid electricity tariffs had been used as a key lever to attract investment in power generation at an early stage of reform and then to encourage competition in the power industry. In response to the rising concerns about environmental protection and the promotion of clean energy utilisation, tariffs have progressively been developed for renewable electricity generation, which has contributed to massive expansion of the renewable power industry in China. This paper reviews key milestones of the development of on-grid electricity tariffs in China, examines the tariff-setting mechanisms of coal-fired power plants and renewable power generation, analyses the factors associated with the adjustments of the tariff levels and discusses the options for further reform and more effective electricity pricing. - Research highlights: → Pragmatic approaches have been taken to adjust on-grid electricity tariffs. → Current tariff policies of coal-power led to suboptimal resource utilisation. → Further market-oriented reforms are needed. → Feed-in tariffs have gradually been established for renewable electricity.

  5. The role of electric grids in the European energy policy. Grids development is necessary to supply cleaner and securer electric power

    Merlin, A.

    2009-01-01

    The world is actually entering a new energy era where CO 2 emissions must be reduced. Consequently, the European Union policy includes three goals: a) to reduce greenhouse gas emissions and fossil energy consumption; b) to improve the security of energy supply; c) to improve interconnection between regions. In this context, electrical grids play a strategic role. While the overall energy consumption in Europe will decrease, the electricity demand will increase by more than 1% per year. A large part of this increase will be covered by renewable energy sources, especially wind energy. In 2020 the total wind power installed in Europe should be ∼1000 GW, leading to a mean power production of 200-250 GW. This makes necessary an adaptation of electrical grids in order to be able to integrate into the system large power sources of intermittent character, and also to improve the solidarity of the different countries. The interconnection of the grids must be improved in order to balance electricity supply and demand. For the transport of electricity over large distances, developments will take place in three different areas; a) high voltage alternative current for most of the grids; b) high voltage direct current where it is necessary to overpass obstacles (mountains, sounds); c) gaseous insulation technology for underground transport. Local (mostly low voltage) grids must also be adapted: so far, they only carry electricity in one direction, to the customers. With the distributed power production, electricity transport in the reverse direction must also be considered

  6. Development and Testing of the Glenn Research Center Visitor's Center Grid-Tied Photovoltaic Power System

    Eichenberg, Dennis J.

    2009-01-01

    The NASA Glenn Research Center (GRC) has developed, installed, and tested a 12 kW DC grid-tied photovoltaic (PV) power system at the GRC Visitor s Center. This system utilizes a unique ballast type roof mount for installing the photovoltaic panels on the roof of the Visitor s Center with no alterations or penetrations to the roof. The PV system has generated in excess of 15000 kWh since operation commenced in August 2008. The PV system is providing power to the GRC grid for use by all. Operation of the GRC Visitor s Center PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provides valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the GRC Visitor s Center PV system, additional PV power system expansion at GRC is under consideration. The GRC Visitor s Center grid-tied PV power system was successfully designed and developed which served to validate the basic principles

  7. Advanced Platform for Development and Evaluation of Grid Interconnection Systems Using Hardware-in-the-Loop: Part III -- Grid Interconnection System Evaluator: Preprint

    Lundstrom, B.; Shirazi, M.; Coddington, M.; Kroposki, B.

    2013-01-01

    This paper, presented at the IEEE Green Technologies Conference 2013, describes a Grid Interconnection System Evaluator (GISE) that leverages hardware-in-the-loop (HIL) simulation techniques to rapidly evaluate the grid interconnection standard conformance of an ICS according to the procedures in IEEE Std 1547.1 (TM). The architecture and test sequencing of this evaluation tool, along with a set of representative ICS test results from three different photovoltaic (PV) inverters, are presented. The GISE adds to the National Renewable Energy Laboratory's (NREL) evaluation platform that now allows for rapid development of ICS control algorithms using controller HIL (CHIL) techniques, the ability to test the dc input characteristics of PV-based ICSs through the use of a PV simulator capable of simulating real-world dynamics using power HIL (PHIL), and evaluation of ICS grid interconnection conformance.

  8. Advanced Platform for Development and Evaluation of Grid Interconnection Systems Using Hardware-in-the-Loop: Part III - Grid Interconnection System Evaluator

    Lundstrom, B.; Shirazi, M.; Coddington, M.; Kroposki, B.

    2013-01-01

    This paper describes a Grid Interconnection System Evaluator (GISE) that leverages hardware-in-the-loop (HIL) simulation techniques to rapidly evaluate the grid interconnection standard conformance of an ICS according to the procedures in IEEE Std 1547.1. The architecture and test sequencing of this evaluation tool, along with a set of representative ICS test results from three different photovoltaic (PV) inverters, are presented. The GISE adds to the National Renewable Energy Laboratory's (NREL) evaluation platform that now allows for rapid development of ICS control algorithms using controller HIL (CHIL) techniques, the ability to test the dc input characteristics of PV-based ICSs through the use of a PV simulator capable of simulating real-world dynamics using power HIL (PHIL), and evaluation of ICS grid interconnection conformance.

  9. Development of a Hydrogen Energy System as a Grid Frequency Management Tool

    Ewan, Mitch [Univ. of Hawaii, Honolulu, HI (United States); Rocheleau, Richard [Univ. of Hawaii, Honolulu, HI (United States); Swider-Lyons, Karen [U.S. Naval Research Lab., Washington, DC (United States); Virji, Meheboob [GRandalytics, Honolulu, HI (United States); Randolph, Guenter [Hydrogen Renewable Energy System Analysis, Pickering, ON (Canada)

    2016-07-15

    The Hawai‘i Natural Energy Institute (HNEI) is conducting research to assess the technical potential of using an electrolyzer-based hydrogen (H2) production and storage system as a grid demand response tool using battery data from a 200 MW grid to show the kind of response required. The hydrogen produced by the electrolyzer is used for transportation. A 65 kg/day hydrogen energy system (HES) consisting of a PEM electrolyzer, 35 bar buffer tank, 450 bar compressor, and associated chiller systems was purchased and installed at the Hawaii Natural Energy Laboratory Hawaii Authority (NELHA) to demonstrate long-term durability of the electrolyzer under cyclic operation required for frequency regulation on an island grid system. The excess hydrogen was stored for use by three fuel-cell buses to be operated at Hawai‘i Volcanoes National Park (HAVO) and by the County of Hawai‘i Mass Transit Agency (MTA). This paper describes the site selection and equipment commissioning, plus a comprehensive test plan that was developed to characterize the performance and durability of the electrolyzer under dynamic load conditions. The controls were modified for the operating envelope and dynamic limits of the electrolyzer. While the data showed these modifications significantly improved the system response time, it is not fast enough to match a BESS response time for grid frequency management. The electrolyzer can only be used for slower acting changes (1 to 0.5 Hz). A potential solution is to design an electrolyzer/BESS hybrid system and develop a modeling program to find the optimum mix of battery and electrolyzer to provide the maximum grid regulation services at minimum cost.

  10. Material Development of Faraday Cup Grids for the Solar Probe Plus Mission

    Volz, M. P.; Mazuruk, K.; Wright, K. H.; Cirtain, J. W.; Lee, R.; Kasper, J. C.

    2011-01-01

    The Solar Probe Plus mission will launch a spacecraft to the Sun to study it's outer atmosphere. One of the instruments on board will be a Faraday Cup (FC) sensor. The FC will determine solar wind properties by measuring the current produced by ions striking a metal collector plate. It will be directly exposed to the Sun and will be subject to the temperature and radiation environment that exist within 10 solar radii. Conducting grids within the FC are biased up to 10 kV and are used to selectively transmit particles based on their energy to charge ratio. We report on the development of SiC grids. Tests were done on nitrogen-doped SiC starting disks obtained from several vendors, including annealing under vacuum at 1400 C and measurement of their electrical properties. SiC grids were manufactured using a photolithographic and plasma-etching process. The grids were incorporated into a prototype FC and tested in a simulated solar wind chamber. The energy cutoffs were measured for both proton and electron fluxes and met the anticipated sensor requirements.

  11. Grid Security

    CERN. Geneva

    2004-01-01

    The aim of Grid computing is to enable the easy and open sharing of resources between large and highly distributed communities of scientists and institutes across many independent administrative domains. Convincing site security officers and computer centre managers to allow this to happen in view of today's ever-increasing Internet security problems is a major challenge. Convincing users and application developers to take security seriously is equally difficult. This paper will describe the main Grid security issues, both in terms of technology and policy, that have been tackled over recent years in LCG and related Grid projects. Achievements to date will be described and opportunities for future improvements will be addressed.

  12. Assessing the universal health coverage target in the Sustainable Development Goals from a human rights perspective.

    Chapman, Audrey R

    2016-12-15

    The UN's Sustainable Development Goals (SDGs), adopted in September 2015, include a comprehensive health goal, "to ensure healthy lives and promote well-being at all ages." The health goal (SDG 3) has nine substantive targets and four additional targets which are identified as a means of implementation. One of these commitments, to achieve universal health coverage (UHC), has been acknowledged as central to the achievement of all of the other health targets. As defined in the SDGs, UHC includes financial risk protection, access to quality essential health-care services, and access to safe, effective, quality and affordable essential medicines and vaccines for all. This article evaluates the extent to which the UHC target in the SDGs conforms with the requirements of the right to health enumerated in the International Covenant on Economic, Social and Cultural Rights, the Convention on the Rights of the Child, and other international human rights instruments and interpreted by international human rights bodies. It does so as a means to identify strengths and weaknesses in the framing of the UHC target that are likely to affect its implementation. While UHC as defined in the SDGs overlaps with human rights standards, there are important human rights omissions that will likely weaken the implementation and reduce the potential benefits of the UHC target. The most important of these is the failure to confer priority to providing access to health services to poor and disadvantaged communities in the process of expanding health coverage and in determining which health services to provide. Unless the furthest behind are given priority and strategies adopted to secure their participation in the development of national health plans, the SDGs, like the MDGs, are likely to leave the most disadvantaged and vulnerable communities behind.

  13. Thermoplastic Composites Reinforced with Textile Grids: Development of a Manufacturing Chain and Experimental Characterisation

    Böhm, R.; Hufnagl, E.; Kupfer, R.; Engler, T.; Hausding, J.; Cherif, C.; Hufenbach, W.

    2013-12-01

    A significant improvement in the properties of plastic components can be achieved by introducing flexible multiaxial textile grids as reinforcement. This reinforcing concept is based on the layerwise bonding of biaxially or multiaxially oriented, completely stretched filaments of high-performance fibers, e.g. glass or carbon, and thermoplastic components, using modified warp knitting techniques. Such pre-consolidated grid-like textiles are particularly suitable for use in injection moulding, since the grid geometry is very robust with respect to flow pressure and temperature on the one hand and possesses an adjustable spacing to enable a complete filling of the mould cavity on the other hand. The development of pre-consolidated textile grids and their further processing into composites form the basis for providing tailored parts with a large number of additional integrated functions like fibrous sensors or electroconductive fibres. Composites reinforced in that way allow new product groups for promising lightweight structures to be opened up in future. The article describes the manufacturing process of this new composite class and their variability regarding reinforcement and function integration. An experimentally based study of the mechanical properties is performed. For this purpose, quasi-static and highly dynamic tensile tests have been carried out as well as impact penetration experiments. The reinforcing potential of the multiaxial grids is demonstrated by means of evaluating drop tower experiments on automotive components. It has been shown that the load-adapted reinforcement enables a significant local or global improvement of the properties of plastic components depending on industrial requirements.

  14. Development of a Microcontroller-based Battery Charge Controller for an Off-grid Photovoltaic System

    Rina, Z. S.; Amin, N. A. M.; Hashim, M. S. M.; Majid, M. S. A.; Rojan, M. A.; Zaman, I.

    2017-08-01

    A development of a microcontroller-based charge controller for a 12V battery has been explained in this paper. The system is designed based on a novel algorithm to couple existing solar photovoltaic (PV) charging and main grid supply charging power source. One of the main purposes of the hybrid charge controller is to supply a continuous charging power source to the battery. Furthermore, the hybrid charge controller was developed to shorten the battery charging time taken. The algorithm is programmed in an Arduino Uno R3 microcontroller that monitors the battery voltage and generates appropriate commands for the charging power source selection. The solar energy is utilized whenever the solar irradiation is high. The main grid supply will be only consumed whenever the solar irradiation is low. This system ensures continuous charging power supply and faster charging of the battery.

  15. SWATHtoMRM: Development of High-Coverage Targeted Metabolomics Method Using SWATH Technology for Biomarker Discovery.

    Zha, Haihong; Cai, Yuping; Yin, Yandong; Wang, Zhuozhong; Li, Kang; Zhu, Zheng-Jiang

    2018-03-20

    The complexity of metabolome presents a great analytical challenge for quantitative metabolite profiling, and restricts the application of metabolomics in biomarker discovery. Targeted metabolomics using multiple-reaction monitoring (MRM) technique has excellent capability for quantitative analysis, but suffers from the limited metabolite coverage. To address this challenge, we developed a new strategy, namely, SWATHtoMRM, which utilizes the broad coverage of SWATH-MS technology to develop high-coverage targeted metabolomics method. Specifically, SWATH-MS technique was first utilized to untargeted profile one pooled biological sample and to acquire the MS 2 spectra for all metabolites. Then, SWATHtoMRM was used to extract the large-scale MRM transitions for targeted analysis with coverage as high as 1000-2000 metabolites. Then, we demonstrated the advantages of SWATHtoMRM method in quantitative analysis such as coverage, reproducibility, sensitivity, and dynamic range. Finally, we applied our SWATHtoMRM approach to discover potential metabolite biomarkers for colorectal cancer (CRC) diagnosis. A high-coverage targeted metabolomics method with 1303 metabolites in one injection was developed to profile colorectal cancer tissues from CRC patients. A total of 20 potential metabolite biomarkers were discovered and validated for CRC diagnosis. In plasma samples from CRC patients, 17 out of 20 potential biomarkers were further validated to be associated with tumor resection, which may have a great potential in assessing the prognosis of CRC patients after tumor resection. Together, the SWATHtoMRM strategy provides a new way to develop high-coverage targeted metabolomics method, and facilitates the application of targeted metabolomics in disease biomarker discovery. The SWATHtoMRM program is freely available on the Internet ( http://www.zhulab.cn/software.php ).

  16. On the development of a grid-enhanced single-phase convective heat transfer correlation

    Miller, D.J.; Cheung, F.B.; Bajorek, S.M.

    2011-01-01

    A new single-phase convective heat transfer augmentation correlation has been developed using single phase steam cooling experimental data obtained from the Penn State/NRC Rod Bundle Heat Transfer (RBHT) facility. Experimental data obtained from the RBHT single phase steam cooling tests have been evaluated and new findings identified. Previous rod bundle tests showed the importance of spacer grid on the local heat transfer, and that the augmentation in heat transfer downstream of a grid decays exponentially. The RBHT data also shows that the Reynolds number affects the rate at which this augmentation decays. The new correlation includes the strong dependence of heat transfer on both the Reynolds number and the grid blockage ratio. While the effects of both parameters were clearly evident in the RBHT experimental data, existing correlations do not account for the Reynolds number effect. The developed correlation incorporates Reynolds number in the decay curve of heat transfer. The newly developed correlation adequately accounts for the dependence of the heat transfer augmentation decay rate on the local flow Reynolds number. (author)

  17. A Review on Development Practice of Smart Grid Technology in China

    Han, Liu; Chen, Wei; Zhuang, Bo; Shen, Hongming

    2017-05-01

    Smart grid has become an inexorable trend of energy and economy development worldwide. Since the development of smart grid was put forward in China in 2009, we have obtained abundant research results and practical experiences as well as extensive attention from international community in this field. This paper reviews the key technologies and demonstration projects on new energy connection forecasts; energy storage; smart substations; disaster prevention and reduction for power transmission lines; flexible DC transmission; distribution automation; distributed generation access and micro grid; smart power consumption; the comprehensive demonstration of power distribution and utilization; smart power dispatching and control systems; and the communication networks and information platforms of China, systematically, on the basis of 5 fields, i.e., renewable energy integration, smart power transmission and transformation, smart power distribution and consumption, smart power dispatching and control systems and information and communication platforms. Meanwhile, it also analyzes and compares with the developmental level of similar technologies abroad, providing an outlook on the future development trends of various technologies.

  18. The MammoGrid Project Grids Architecture

    McClatchey, Richard; Hauer, Tamas; Estrella, Florida; Saiz, Pablo; Rogulin, Dmitri; Buncic, Predrag; Clatchey, Richard Mc; Buncic, Predrag; Manset, David; Hauer, Tamas; Estrella, Florida; Saiz, Pablo; Rogulin, Dmitri

    2003-01-01

    The aim of the recently EU-funded MammoGrid project is, in the light of emerging Grid technology, to develop a European-wide database of mammograms that will be used to develop a set of important healthcare applications and investigate the potential of this Grid to support effective co-working between healthcare professionals throughout the EU. The MammoGrid consortium intends to use a Grid model to enable distributed computing that spans national borders. This Grid infrastructure will be used for deploying novel algorithms as software directly developed or enhanced within the project. Using the MammoGrid clinicians will be able to harness the use of massive amounts of medical image data to perform epidemiological studies, advanced image processing, radiographic education and ultimately, tele-diagnosis over communities of medical "virtual organisations". This is achieved through the use of Grid-compliant services [1] for managing (versions of) massively distributed files of mammograms, for handling the distri...

  19. Development of Applicable Test Scenario by the Grid Simulator of a Functional Test Bench

    Farajzadehbibalan, Saber

    In this thesis, a data-driven testing procedure for wind turbine generators is developed. The procedure generates a data set for a hardware-in-the-loop testing setup at a test facility. The goal is to shorten validation process, prevent damage from highly dangerous grid tests, and conduct different...... tests. The proposed procedure deploys a multivariate statistical model of the power grid derived from the wind farm's standpoint. A practical data set of an operational wind farm is available which is logged during the years of 2013 and 2014 for model identification and validation, respectively....... The first step of modeling is deriving the model from the standpoint of an arbitrary wind turbine generator utilizing dynamic principal component analysis. The model is the transformed data samples into a new projected space, i.e. latent space, as the combination of the principal components and the scores...

  20. Accelerating health equity: the key role of universal health coverage in the Sustainable Development Goals.

    Tangcharoensathien, Viroj; Mills, Anne; Palu, Toomas

    2015-04-29

    The Sustainable Development Goals (SDGs), to be committed to by Heads of State at the upcoming 2015 United Nations General Assembly, have set much higher and more ambitious health-related goals and targets than did the Millennium Development Goals (MDGs). The main challenge among MDG off-track countries is the failure to provide and sustain financial access to quality services by communities, especially the poor. Universal health coverage (UHC), one of the SDG health targets indispensable to achieving an improved level and distribution of health, requires a significant increase in government investment in strengthening primary healthcare - the close-to-client service which can result in equitable access. Given the trend of increased fiscal capacity in most developing countries, aiming at long-term progress toward UHC is feasible, if there is political commitment and if focused, effective policies are in place. Trends in high income countries, including an aging population which increases demand for health workers, continue to trigger international migration of health personnel from low and middle income countries. The inspirational SDGs must be matched with redoubled government efforts to strengthen health delivery systems, produce and retain more and relevant health workers, and progressively realize UHC.

  1. Estimation of Global 1km-grid Terrestrial Carbon Exchange Part I: Developing Inputs and Modelling

    Sasai, T.; Murakami, K.; Kato, S.; Matsunaga, T.; Saigusa, N.; Hiraki, K.

    2015-12-01

    Global terrestrial carbon cycle largely depends on a spatial pattern in land cover type, which is heterogeneously-distributed over regional and global scales. However, most studies, which aimed at the estimation of carbon exchanges between ecosystem and atmosphere, remained within several tens of kilometers grid spatial resolution, and the results have not been enough to understand the detailed pattern of carbon exchanges based on ecological community. Improving the sophistication of spatial resolution is obviously necessary to enhance the accuracy of carbon exchanges. Moreover, the improvement may contribute to global warming awareness, policy makers and other social activities. In this study, we show global terrestrial carbon exchanges (net ecosystem production, net primary production, and gross primary production) with 1km-grid resolution. As methodology for computing the exchanges, we 1) developed a global 1km-grid climate and satellite dataset based on the approach in Setoyama and Sasai (2013); 2) used the satellite-driven biosphere model (Biosphere model integrating Eco-physiological And Mechanistic approaches using Satellite data: BEAMS) (Sasai et al., 2005, 2007, 2011); 3) simulated the carbon exchanges by using the new dataset and BEAMS by the use of a supercomputer that includes 1280 CPU and 320 GPGPU cores (GOSAT RCF of NIES). As a result, we could develop a global uniform system for realistically estimating terrestrial carbon exchange, and evaluate net ecosystem production in each community level; leading to obtain highly detailed understanding of terrestrial carbon exchanges.

  2. Development of an Advanced Grid-Connected PV-ECS System Considering Solar Energy Estimation

    Rahman, Md. Habibur; Yamashiro, Susumu; Nakamura, Koichi

    In this paper, the development and the performance of a viable distributed grid-connected power generation system of Photovoltaic-Energy Capacitor System (PV-ECS) considering solar energy estimation have been described. Instead of conventional battery Electric Double Layer Capacitors (EDLC) are used as storage device and Photovoltaic (PV) panel to generate power from solar energy. The system can generate power by PV, store energy when the demand of load is low and finally supply the stored energy to load during the period of peak demand. To realize the load leveling function properly the system will also buy power from grid line when load demand is high. Since, the power taken from grid line depends on the PV output power, a procedure has been suggested to estimate the PV output power by calculating solar radiation. In order to set the optimum value of the buy power, a simulation program has also been developed. Performance of the system has been studied for different load patterns in different weather conditions by using the estimated PV output power with the help of the simulation program.

  3. Development of a multi-grid FDTD code for three-dimensional simulation of large microwave sintering experiments

    White, M.J.; Iskander, M.F. [Univ. of Utah, Salt Lake City, UT (United States). Electrical Engineering Dept.; Kimrey, H.D. [Oak Ridge National Lab., TN (United States)

    1996-12-31

    The Finite-Difference Time-Domain (FDTD) code available at the University of Utah has been used to simulate sintering of ceramics in single and multimode cavities, and many useful results have been reported in literature. More detailed and accurate results, specifically around and including the ceramic sample, are often desired to help evaluate the adequacy of the heating procedure. In electrically large multimode cavities, however, computer memory requirements limit the number of the mathematical cells, and the desired resolution is impractical to achieve due to limited computer resources. Therefore, an FDTD algorithm which incorporates multiple-grid regions with variable-grid sizes is required to adequately perform the desired simulations. In this paper the authors describe the development of a three-dimensional multi-grid FDTD code to help focus a large number of cells around the desired region. Test geometries were solved using a uniform-grid and the developed multi-grid code to help validate the results from the developed code. Results from these comparisons, as well as the results of comparisons between the developed FDTD code and other available variable-grid codes are presented. In addition, results from the simulation of realistic microwave sintering experiments showed improved resolution in critical sites inside the three-dimensional sintering cavity. With the validation of the FDTD code, simulations were performed for electrically large, multimode, microwave sintering cavities to fully demonstrate the advantages of the developed multi-grid FDTD code.

  4. Integrated Coverage of Radioactive and Hazardous Waste Issues in Developing Countries- Lessons Learned and Current Development-

    Subasic, D.; Kucar-Dragicevic, S.; Lokner, V.

    1999-01-01

    The perception of the sustainable development concept is quite different in countries with a different level of development. Rather limited resources allocated for environmental problems in developing countries should be used in the most pragmatic way. Setting up and operating two separate national systems for management of radioactive and hazardous waste is not the best example to be followed by developing countries with relatively small quantities of radioactive and hazardous wastes. This paper reviews existing practice of radioactive and hazardous waste management in Croatia and discusses advantages of joint waste management system

  5. Connections beyond the margins of the power grid Information technology and the evolution of off-grid solar electricity in the developing world

    Alstone, Peter Michael

    This work explores the intersections of information technology and off-grid electricity deployment in the developing world with focus on a key instance: the emergence of pay-as-you-go (PAYG) solar household-scale energy systems. It is grounded in detailed field study by my research team in Kenya between 2013-2014 that included primary data collection across the solar supply chain from global businesses through national and local distribution and to the end-users. We supplement the information with business process and national survey data to develop a detailed view of the markets, technology systems, and individuals who interact within those frameworks. The findings are presented in this dissertation as a series of four chapters with introductory, bridging, and synthesis material between them. The first chapter, Decentralized Energy Systems for Clean Electricity Access, presents a global view of the emerging off-grid power sector. Long-run trends in technology create "a unique moment in history" for closing the gap between global population and access to electricity, which has stubbornly held at 1-2 billion people without power since the initiation of the electric utility business model in the late 1800's. We show the potential for widespread near-term adoption of off-grid solar, which could lead to ten times less inequality in access and also ten times lower household-level climate impacts. Decentralized power systems that replace fuel-based incumbent lighting can advance the causes of climate stabilization, economic and social freedom and human health. Chapters two and three are focused on market and institutional dynamics present circa 2014 in for off-grid solar with a focus on the Kenya market. Chapter 2, "Off-grid Power and Connectivity", presents our findings related to the widespread influence of information technology across the supply chain for solar and in PAYG approaches. Using digital financing and embedded payment verification technology, PAYG

  6. Universal health coverage and the health Sustainable Development Goal: achievements and challenges for Sri Lanka.

    de Silva, Amala; Ranasinghe, Thushara; Abeykoon, Palitha

    2016-09-01

    With state-funded health care that is free at the point of delivery, a sound primary health-care policy and widespread health-care services, Sri Lanka seems a good example of universal health coverage. Yet, health transition and disparities in provision and financing threaten this situation. Sri Lanka did well on the Millennium Development Goal health indicators, but the Sustainable Development Goal (SDG) for health has a wider purview, which is to "ensure healthy lives and promote well-being for all at all ages". The gender gap in life expectancy and the gap between life expectancy and healthy life expectancy make achievement of the health SDG more challenging. Although women and children do well overall, the comparative health disadvantage for men in Sri Lanka is a cause for concern. From a financing perspective, high out-of-pocket expenditure and high utilization of the private sector, even by those in the lowest income quintile, are concerns, as is the emerging "third tier", where some individuals accessing state health care that is free at the point of delivery actually bear some of the costs of drugs, investigations and surgery. This cost sharing is resulting in catastrophic health expenditure for individuals, and delays in and non-compliance with treatment. These concerns about provision and financing must be addressed, as health transition will intensify the morbidity burden and loss of well-being, and could derail plans to achieve the health SDG.

  7. The Recent Change in the Italian Policies for Photovoltaics: Effects on the Energy Demand Coverage of Grid-Connected PV Systems Installed in Urban Contexts

    Aldo Orioli

    2016-11-01

    Full Text Available In July 2013, the Italian photovoltaic (PV support policies changed the feed-in tariff (FIT mechanism and turned to a tax credits program, which is currently in force. The aim of this paper is to investigate how such a radical change has influenced the electricity demand coverage of the PV systems installed in urban contexts. A methodology, which connects the economic assessment to a detailed architectural and energy suitability analysis, was applied to some case studies to analyse the relationships between the physical parameters related to multi-storey buildings (roof shapes, number of floors and area of flats and the most relevant economic and financial features affecting the viability of rooftop PV systems. The study, which considers only the electricity produced by the PV systems that are economically profitable, highlighted that the tax credits scheme is even more effective in covering the electrical consumption of densely urbanised Italian city districts. The results, which are significantly influenced by the latitude of the analysed districts, underline the opportunity for governments to adopt PV promoting policies that are more sensitive to the amount of solar energy available in the different regions of their national territory.

  8. Recent development of the Multi-Grid detector for large area neutron scattering instruments

    Guerard, Bruno

    2015-01-01

    Most of the Neutron Scattering facilities are committed in a continuous program of modernization of their instruments, requiring large area and high performance thermal neutron detectors. Beside scintillators detectors, 3 He detectors, like linear PSDs (Position Sensitive Detectors) and MWPCs (Multi-Wires Proportional Chambers), are the most current techniques nowadays. Time Of Flight instruments are using 3 He PSDs mounted side by side to cover tens of m 2 . As a result of the so-called ' 3 He shortage crisis , the volume of 3He which is needed to build one of these instruments is not accessible anymore. The development of alternative techniques requiring no 3He, has been given high priority to secure the future of neutron scattering instrumentation. This is particularly important in the context where the future ESS (European Spallation Source) will start its operation in 2019-2020. Improved scintillators represent one of the alternative techniques. Another one is the Multi-Grid introduced at the ILL in 2009. A Multi-Grid detector is composed of several independent modules of typically 0.8 m x 3 m sensitive area, mounted side by side in air or in a vacuum TOF chamber. One module is composed of segmented boron-lined proportional counters mounted in a gas vessel; the counters, of square section, are assembled with Aluminium grids electrically insulated and stacked together. This design provides two advantages: First, magnetron sputtering techniques can be used to coat B 4 C films on planar substrates, and second, the neutron position along the anode wires can be measured by reading out individually the grid signals with fast shaping amplifiers followed by comparators. Unlike charge division localisation in linear PSDs, the individual readout of the grids allows operating the Multi-Grid at a low amplification gain, hence this detector is tolerant to mechanical defects and its production accessible to laboratories equipped with standard equipment. Prototypes of

  9. Recent development of the Multi-Grid detector for large area neutron scattering instruments

    Guerard, Bruno [ILL-ESS-LiU collaboration, CRISP project, Institut Laue Langevin - ILL, Grenoble (France)

    2015-07-01

    Most of the Neutron Scattering facilities are committed in a continuous program of modernization of their instruments, requiring large area and high performance thermal neutron detectors. Beside scintillators detectors, {sup 3}He detectors, like linear PSDs (Position Sensitive Detectors) and MWPCs (Multi-Wires Proportional Chambers), are the most current techniques nowadays. Time Of Flight instruments are using {sup 3}He PSDs mounted side by side to cover tens of m{sup 2}. As a result of the so-called '{sup 3}He shortage crisis{sup ,} the volume of 3He which is needed to build one of these instruments is not accessible anymore. The development of alternative techniques requiring no 3He, has been given high priority to secure the future of neutron scattering instrumentation. This is particularly important in the context where the future ESS (European Spallation Source) will start its operation in 2019-2020. Improved scintillators represent one of the alternative techniques. Another one is the Multi-Grid introduced at the ILL in 2009. A Multi-Grid detector is composed of several independent modules of typically 0.8 m x 3 m sensitive area, mounted side by side in air or in a vacuum TOF chamber. One module is composed of segmented boron-lined proportional counters mounted in a gas vessel; the counters, of square section, are assembled with Aluminium grids electrically insulated and stacked together. This design provides two advantages: First, magnetron sputtering techniques can be used to coat B{sub 4}C films on planar substrates, and second, the neutron position along the anode wires can be measured by reading out individually the grid signals with fast shaping amplifiers followed by comparators. Unlike charge division localisation in linear PSDs, the individual readout of the grids allows operating the Multi-Grid at a low amplification gain, hence this detector is tolerant to mechanical defects and its production accessible to laboratories equipped with standard

  10. Evaluation of a Positive Youth Development Program Based on the Repertory Grid Test

    Daniel T. L. Shek

    2012-01-01

    Full Text Available The repertory grid test, based on personal construct psychology, was used to evaluate the effectiveness of Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes in Hong Kong. One hundred and four program participants (n=104 were randomly invited to complete a repertory grid based on personal construct theory in order to provide both quantitative and qualitative data for measuring self-identity changes after joining the program. Findings generally showed that the participants perceived that they understood themselves better and had stronger resilience after joining the program. Participants also saw themselves as closer to their ideal selves and other positive role figures (but farther away from a loser after joining the program. This study provides additional support for the effectiveness of the Tier 1 Program of Project P.A.T.H.S. in the Chinese context. This study also shows that the repertory grid test is a useful evaluation method to measure self-identity changes in participants in positive youth development programs.

  11. Social determinants of health, universal health coverage, and sustainable development: case studies from Latin American countries.

    de Andrade, Luiz Odorico Monteiro; Pellegrini Filho, Alberto; Solar, Orielle; Rígoli, Félix; de Salazar, Lígia Malagon; Serrate, Pastor Castell-Florit; Ribeiro, Kelen Gomes; Koller, Theadora Swift; Cruz, Fernanda Natasha Bravo; Atun, Rifat

    2015-04-04

    Many intrinsically related determinants of health and disease exist, including social and economic status, education, employment, housing, and physical and environmental exposures. These factors interact to cumulatively affect health and disease burden of individuals and populations, and to establish health inequities and disparities across and within countries. Biomedical models of health care decrease adverse consequences of disease, but are not enough to effectively improve individual and population health and advance health equity. Social determinants of health are especially important in Latin American countries, which are characterised by adverse colonial legacies, tremendous social injustice, huge socioeconomic disparities, and wide health inequities. Poverty and inequality worsened substantially in the 1980s, 1990s, and early 2000s in these countries. Many Latin American countries have introduced public policies that integrate health, social, and economic actions, and have sought to develop health systems that incorporate multisectoral interventions when introducing universal health coverage to improve health and its upstream determinants. We present case studies from four Latin American countries to show the design and implementation of health programmes underpinned by intersectoral action and social participation that have reached national scale to effectively address social determinants of health, improve health outcomes, and reduce health inequities. Investment in managerial and political capacity, strong political and managerial commitment, and state programmes, not just time-limited government actions, have been crucial in underpinning the success of these policies. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Renewable generation and demand response integration in micro-grids. Development of a new energy management and control system

    Alvarez-Bel, C.; Escriva-Escriva, G.; Alcazar-Ortega, M. [Institute for Energy Engineering, Universitat Politecnica de Valencia, Valencia (Spain)

    2013-11-15

    The aim of this research resides in the development of an energy management and control system to control a micro-grid based on the use of renewable generation and demand resources to introduce the application of demand response concepts to the management of micro-grids in order to effectively integrate the demand side as an operation resource for the grid and improve energy efficiency of the elements. As an additional result, the evaluation of reductions in the total amount of CO2 emitted into the atmosphere due to the improvement of the energy efficiency of the system is assessed.

  13. Intelligent Operation and Maintenance of Micro-grid Technology and System Development

    Fu, Ming; Song, Jinyan; Zhao, Jingtao; Du, Jian

    2018-01-01

    In order to achieve the micro-grid operation and management, Studying the micro-grid operation and maintenance knowledge base. Based on the advanced Petri net theory, the fault diagnosis model of micro-grid is established, and the intelligent diagnosis and analysis method of micro-grid fault is put forward. Based on the technology, the functional system and architecture of the intelligent operation and maintenance system of micro-grid are studied, and the microcomputer fault diagnosis function is introduced in detail. Finally, the system is deployed based on the micro-grid of a park, and the micro-grid fault diagnosis and analysis is carried out based on the micro-grid operation. The system operation and maintenance function interface is displayed, which verifies the correctness and reliability of the system.

  14. Process development for the manufacturing of state-of-the-art spacer grids

    Schebitz, Florian; Dietrich, Matthias [Advanced Nuclear Fuels GmbH, Karlstein (Germany)

    2013-07-01

    At the beginning it was questioned if 'time to market' is really important for the nuclear industry. The clear answer is YES. Even if the development times might be longer compared to projects in other industries it is still beneficial to use concurrent engineering. In the world wide network of manufacturing sites, Advanced Nuclear Fuels GmbH in Karlstein is quite often involved when the development of new processes is necessary. As ANF Karlstein is delivering products around the world the experience with different customer requirements supports an optimized solution in order to fulfill these principle requirements and to deliver state-of-the-art products like spacer grids. Continues feedback from process development already improves the first prototypes. In the meantime ANF Karlstein manufactured the components for both new fuel assembly designs which are introduced as a first set of Lead Fuel Assemblies. For the manufacturing of the next sets of spacer grids (for tests and next series of Lead Fuel Assemblies) the described processes will be used and further improved, so that an industrialized solution is available. (orig.)

  15. Exploring Transition of Large Technological Systems through Relational Data - A Study of The Danish Smart Grid Development

    Jurowetzki, Roman

    2016-01-01

    in the transformation process. While they can contribute with resources, capabilities, and their connections to the development of the new grid infrastructure, they may also impede innovation given their ownership of and assumed interest in the established system. These insights should be considered in policy...... transformation of the energy grid infrastructure. The focus is set on how the interplay between established and new technologies and actors determines the direction and outcomes of innovation in large technological systems (such as the Danish smart grid). Results of several chapters indicate that in the Danish......Combining elements form the Science, Technology and Society (STS) tradition with the Technological Innovation System (TIS) framework and utilising unstructured and relational data as well as novel analysis tools, this thesis explores the development of the Danish smart grid and the associated...

  16. Smart business for smart users? : A social science agenda for developing smart grids

    Verbong, G.P.J.; Verkade, N.; Verhees, B.; Huijben, J.C.C.M.; Höffken, J.I.; Beaulieu, A.; de Wilde, J.; Scherpen, J.M.A.

    2016-01-01

    The promise of smart grids is very attractive. However, it is not yet clear what the future smart grid will look like. Although most researchers acknowledge that users will play a more prominent role in smart grids, there is a lot of uncertainty on this issue. To counter the strong techno-logical

  17. Concomitant GRID boost for Gamma Knife radiosurgery

    Ma Lijun; Kwok, Young; Chin, Lawrence S.; Simard, J. Marc; Regine, William F.

    2005-01-01

    We developed an integrated GRID boost technique for Gamma Knife radiosurgery. The technique generates an array of high dose spots within the target volume via a grid of 4-mm shots. These high dose areas were placed over a conventional Gamma Knife plan where a peripheral dose covers the full target volume. The beam weights of the 4-mm shots were optimized iteratively to maximize the integral dose inside the target volume. To investigate the target volume coverage and the dose to the adjacent normal brain tissue for the technique, we compared the GRID boosted treatment plans with conventional Gamma Knife treatment plans using physical and biological indices such as dose-volume histogram (DVH), DVH-derived indices, equivalent uniform dose (EUD), tumor control probabilities (TCP), and normal tissue complication probabilities (NTCP). We found significant increase in the target volume indices such as mean dose (5%-34%; average 14%), TCP (4%-45%; average 21%), and EUD (2%-22%; average 11%) for the GRID boost technique. No significant change in the peripheral dose coverage for the target volume was found per RTOG protocol. In addition, the EUD and the NTCP for the normal brain adjacent to the target (i.e., the near region) were decreased for the GRID boost technique. In conclusion, we demonstrated a new technique for Gamma Knife radiosurgery that can escalate the dose to the target while sparing the adjacent normal brain tissue

  18. Development of large scale fusion plasma simulation and storage grid on JAERI Origin3800 system

    Idomura, Yasuhiro; Wang, Xin

    2003-01-01

    Under the Numerical EXperiment of Tokamak (NEXT) research project, various fluid, particle, and hybrid codes have been developed. These codes require a computational environment which consists of high performance processors, high speed storage system, and high speed parallelized visualization system. In this paper, the performance of the JAERI Origin3800 system is examined from a point of view of these requests. In the performance tests, it is shown that the representative particle and fluid codes operate with 15 - 40% of processing efficiency up to 512 processors. A storage area network (SAN) provides high speed parallel data transfer. A parallel visualization system enables order to magnitude faster visualization of a large scale simulation data compared with the previous graphic workstations. Accordingly, an extremely advanced simulation environment is realized on the JAERI Origin3800 system. Recently, development of a storage grid is underway in order to improve a computational environment of remote users. The storage grid is constructed by a combination of SAN and a wavelength division multiplexer (WDM). The preliminary tests show that compared with the existing data transfer methods, it enables dramatically high speed data transfer ∼100 Gbps over a wide area network. (author)

  19. New development in relay protection for smart grid : new principles of fault distinction

    Zhang, B.; Hao, Z. [Xi' an Jiaotong Univ., Xian (China); Klimek, A. [Powertech Labs Inc., Surrey, BC (Canada); Bo, Z. [Alstom Grid Automation (United Kingdom)

    2010-07-01

    China is planning to integrate a smart grid into a proposed 750/1000 kV transmission network. However, the performance of the protection relay must be assured in order to have this kind of transmitting capacity. There are many protection strategies that address the many demands of a smart grid, including ultra-high-speed transient-based fault discrimination; new co-ordination principles of main and back-up protection to suit the diversification of the power network; optimal co-ordination between relay protection; and autoreclosure to enhance robustness of the power network. There are also new developments in protection early warning and tripping functions in the protection concepts based on wide area information. This paper presented the principles, algorithms and techniques of single-ended, transient-based and ultra-high-speed protection for extra-high voltage (EHV) transmission lines, buses, DC transmission lines and faulted line selection for non-solid earthed networks. Test results have verified that the proposed methods can determine fault characteristics with ultra-high-speed (5 ms), and that the new principles of fault discrimination can satisfy the demand of EHV systems within a smart grid. High speed Digital Signal Processor (DSP) embedded system techniques combined with optical sensors provide the ability to record and compute detailed fault transients. This technology makes it possible to implement protection principles based on transient information. Due to the inconsistent nature of the wave impedance for various power apparatuses and the reflection and refraction characteristics of their interconnection points, the fault transients contain abundant information about the fault location and type. It is possible to construct ultra high speed and more sensitive AC, DC and busbar main protection through the correct analysis of such information. 23 refs., 6 figs.

  20. Development of NPP Safety Requirements into Kenya's Grid Codes

    Ndirangu, Nguni James; Koo, Chang Choong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    As presently drafted, Kenya's grid codes do not contain any NPP requirements. Through case studies of selected grid codes, this paper will study frequency, voltage and fault ride through requirements for NPP connection and operation, and offer recommendation of how these requirements can be incorporated in the Kenya's grid codes. Voltage and frequency excursions in Kenya's grid are notably frequently outside the generic requirement and the values observed by the German and UK grid codes. Kenya's grid codes require continuous operation for ±10% of nominal voltage and 45.0 to 52Hz on the grid which poses safety issues for an NPP. Considering stringent NPP connection to grid and operational safety requirements, and the importance of the TSO to NPP safety, more elaborate requirements need to be documented in the Kenya's grid codes. UK and Germany have a history of meeting high standards of nuclear safety and it is therefore recommended that format like the one in Table 1 to 3 should be adopted. Kenya's Grid code considering NPP should have: • Strict rules for voltage variation, that is, -5% to +10% of the nominal voltage • Strict rules for frequency variation, that is, 48Hz to 52Hz of the nominal frequencyand.

  1. Development of NPP Safety Requirements into Kenya's Grid Codes

    Ndirangu, Nguni James; Koo, Chang Choong

    2015-01-01

    As presently drafted, Kenya's grid codes do not contain any NPP requirements. Through case studies of selected grid codes, this paper will study frequency, voltage and fault ride through requirements for NPP connection and operation, and offer recommendation of how these requirements can be incorporated in the Kenya's grid codes. Voltage and frequency excursions in Kenya's grid are notably frequently outside the generic requirement and the values observed by the German and UK grid codes. Kenya's grid codes require continuous operation for ±10% of nominal voltage and 45.0 to 52Hz on the grid which poses safety issues for an NPP. Considering stringent NPP connection to grid and operational safety requirements, and the importance of the TSO to NPP safety, more elaborate requirements need to be documented in the Kenya's grid codes. UK and Germany have a history of meeting high standards of nuclear safety and it is therefore recommended that format like the one in Table 1 to 3 should be adopted. Kenya's Grid code considering NPP should have: • Strict rules for voltage variation, that is, -5% to +10% of the nominal voltage • Strict rules for frequency variation, that is, 48Hz to 52Hz of the nominal frequencyand

  2. Moving from ideas to action - developing health financing systems towards universal coverage in Africa

    Musango Laurent

    2012-11-01

    Full Text Available Abstract Background Accelerating progress towards universal coverage in African countries calls for concrete actions that reinforce social health protection through establishment of sustainable health financing mechanisms. In order to explore possible pathways for moving past the existing obstacles, panel discussions were organized on health financing bringing together Ministers of health and Ministers of finance with the objective of creating a discussion space where the different perspectives on key issues and needed actions could meet. This article presents a synthesis of panel discussions focusing on the identified challenges and the possible solutions. The overview of this paper is based on the objectives and proceedings of the panel discussions and relies on the observation and study of the interaction between the panelists and on the discourse used. Summary The discussion highlighted that a large proportion of the African population has no access to needed health services with significant reliance on direct out of pocket payments. There are multiple obstacles in making prepayment and pooling mechanisms operational. The relatively strong political commitment to health has not always translated into more public spending for health. Donor investment in health in low income countries still falls below commitments. There is need to explore innovative domestic revenue collection mechanisms. Although inadequate funding for health is a fundamental problem, inefficient use of resources is of great concern. There is need to generate robust evidence focusing on issues of importance to ministry of finance. The current unsatisfactory state of health financing was mainly attributed to lack of clear vision; evidence based plans and costed strategies. Discussion Based on the analysis of discussion made, there are points of convergence and divergence in the discourse and positions of the two ministries. The current blockage points holding back budget

  3. Moving from ideas to action - developing health financing systems towards universal coverage in Africa.

    Musango, Laurent; Orem, Juliet Nabyonga; Elovainio, Riku; Kirigia, Joses

    2012-11-08

    Accelerating progress towards universal coverage in African countries calls for concrete actions that reinforce social health protection through establishment of sustainable health financing mechanisms. In order to explore possible pathways for moving past the existing obstacles, panel discussions were organized on health financing bringing together Ministers of health and Ministers of finance with the objective of creating a discussion space where the different perspectives on key issues and needed actions could meet. This article presents a synthesis of panel discussions focusing on the identified challenges and the possible solutions. The overview of this paper is based on the objectives and proceedings of the panel discussions and relies on the observation and study of the interaction between the panelists and on the discourse used. The discussion highlighted that a large proportion of the African population has no access to needed health services with significant reliance on direct out of pocket payments. There are multiple obstacles in making prepayment and pooling mechanisms operational. The relatively strong political commitment to health has not always translated into more public spending for health. Donor investment in health in low income countries still falls below commitments. There is need to explore innovative domestic revenue collection mechanisms. Although inadequate funding for health is a fundamental problem, inefficient use of resources is of great concern. There is need to generate robust evidence focusing on issues of importance to ministry of finance. The current unsatisfactory state of health financing was mainly attributed to lack of clear vision; evidence based plans and costed strategies. Based on the analysis of discussion made, there are points of convergence and divergence in the discourse and positions of the two ministries. The current blockage points holding back budget allocations for health can be solved with a more evidence based

  4. Examination of the Spatial Correlation Among Gauge Precipitation Data and Gridded Radar Data for the Determination of Sufficient in-Situ Network Coverage

    Gassert, K.; Kunkel, K.; Nelson, B. R.; Prat, O. P.; Stevens, S. E.

    2014-12-01

    Monitoring of pressure buildup can provide explicit information on reservoir integrity and is an appealing tool, however pressure variation is dependent on a variety of factors causing high uncertainty in pressure predictions. This work evaluated pressurization of a reservoir system in the presence of leakage pathways as well as exploring the effects of compartmentalization of the reservoir utilizing design of experiments (Definitive Screening, Box Behnken, Central Composite, and Latin Hypercube designs) and response surface methods. Two models were developed, 1) an idealized injection scenario in order to evaluate the performance of multiple designs, and 2) a complex injection scenario implementing the best performing design to investigate pressurization of the reservoir system. A holistic evaluation of scenario 1, determined that the Central Composite design would be used for the complex injection scenario. The complex scenario evaluated 5 risk factors: reservoir, seal, leakage pathway and fault permeabilities, and horizontal position of the pathway. A total of 60 response surface models (RSM) were developed for the complex scenario with an average R2 of 0.95 and a NRMSE of 0.067. Sensitivity to the input factors was dynamic through space and time; at the earliest time (0.05 years) the reservoir permeability was dominant, and for later times (>0.5 years) the fault permeability became dominant for all locations. The RSM's were then used to conduct a Monte Carlo Analysis to further analyze pressurization risks, identifying the P10, P50, P90 values. This identified the in zone (lower) P90 values as 2.16, 1.77, and 1.53 MPa and above zone values of 1.35, 1.23, 1.09 MPa for monitoring locations 1, 2, and 3, respectively. In summary, the design of experiments and response surface methods allowed for an efficient sensitivity and uncertainty analysis to be conducted permitting a complete evaluation of the pressurization across the entire parameter space.

  5. CANDU safety analysis system establishment; development of trip coverage and multi-dimensional hydrogen analysis methodology

    Choi, Jong Ho; Ohn, M. Y.; Cho, C. H. [KOPEC, Taejon (Korea)

    2002-03-01

    The trip coverage analysis model requires the geometry network for primary and secondary circuit as well as the plant control system to simulate all the possible plant operating conditions throughout the plant life. The model was validated for the power maneuvering and the Wolsong 4 commissioning test. The trip coverage map was produced for the large break loss of coolant accident and the complete loss of class IV power event. The reliable multi-dimensional hydrogen analysis requires the high capability for thermal hydraulic modelling. To acquire such a basic capability and verify the applicability of GOTHIC code, the assessment of heat transfer model, hydrogen mixing and combustion model was performed. Also, the assessment methodology for flame acceleration and deflagration-to-detonation transition is established. 22 refs., 120 figs., 31 tabs. (Author)

  6. Governing the transition of socio-technical systems: A case study of the development of smart grids in Korea

    Ngar-yin Mah, Daphne; van der Vleuten, Johannes Marinus; Chi-man Ip, Jasper; Ronald Hills, Peter

    2012-01-01

    This paper examines the motivations, processes and outcomes of the development of smart grids in South Korea through the perspectives of governance and innovation systems. Drawing on desktop research and semi-structured interviews, this paper has two major findings. First, the development of smart grids in Korea has been shaped by various factors including macroeconomic policy, the role of the government, and experimentation. The complex interactions between these factors at the landscape, regime and niche levels has impacted on the development of smart grids. Second, while Korea's government-led approach has its strengths in driving change, it has also exposed weaknesses in the country's ability to mobilise the private sector and consumer participation. Major obstacles including partial electricity market reform and public distrust exist. A systemic perspective is needed for policy in order to accommodate the changes required for smart grid development. Regulatory reforms, particularly price-setting mechanisms, and consumer engagement are priority areas for policy change. - Highlights: ► Smart grid developments in Korea have been affected by factors that go beyond technological ones. ► Those factors include macroeconomic policy, government's role, and experimentations. ► These factors also interacted at the landscape, regime and niche levels. ► The government-led approach has limitations in engaging the private sector and consumers. ► Major constrains include partial electricity market reform and public distrust.

  7. Summary of the fuel rod support system (grids) design for LWBR (LWBR development program)

    Richardson, K.D.

    1979-02-01

    Design features of the fuel rod support system (grids) for the Light Water Breeder Reactor (LWBR) installed in the Shippingport Atomic Power Station, Shippingport, Pennsylvania, are described. The grids are fabricated from AM-350 stainless steel and provide lateral support of the fuel rods in the three regions (seed, blanket, and reflector) of the reactor. A comparison is made of the LWBR grids, whose cells are arranged in triangular-pitched arrays, with rod support systems employed in commercial light water reactors

  8. Are doctors and nurses associated with coverage of essential health services in developing countries? A cross-sectional study

    de Pinho Helen

    2009-03-01

    Full Text Available Abstract Background There is broad policy consensus that a shortage of doctors and nurses is a key constraint to increasing utilization of essential health services important for achieving the health Millennium Development Goals. However there is limited research on the quantitative links between health workers and service coverage rates. We examined the relationship between doctor and nurse concentrations and utilization rates of five essential health services in developing countries. Methods We performed cross-national analyses of low- and middle-income countries by means of ordinary least squares regression with coverage rates of antenatal care, attended delivery, caesarean section, measles immunization, tuberculosis case diagnosis and care for acute respiratory infection as outcomes. Doctor, nurse and aggregate health worker (sum of doctors and nurses concentrations were the main explanatory variables. Results Nurses were associated with utilization of skilled birth attendants (P = 0.02 and doctors were associated with measles immunization rates (P = 0.01 in separate adjusted analyses. Aggregate health workers were associated with the utilization of skilled birth attendants (P Conclusion A range of health system and population-level factors aside from health workers influences coverage of health services in developing countries. However, it is also plausible that health workers who are neither doctors nor nurses, such as clinical officers and community health workers, may be providing a substantial proportion of health services. The human resources for health research agenda should be expanded beyond doctors and nurses.

  9. Grid for Earth Science Applications

    Petitdidier, Monique; Schwichtenberg, Horst

    2013-04-01

    The civil society at large has addressed to the Earth Science community many strong requirements related in particular to natural and industrial risks, climate changes, new energies. The main critical point is that on one hand the civil society and all public ask for certainties i.e. precise values with small error range as it concerns prediction at short, medium and long term in all domains; on the other hand Science can mainly answer only in terms of probability of occurrence. To improve the answer or/and decrease the uncertainties, (1) new observational networks have been deployed in order to have a better geographical coverage and more accurate measurements have been carried out in key locations and aboard satellites. Following the OECD recommendations on the openness of research and public sector data, more and more data are available for Academic organisation and SMEs; (2) New algorithms and methodologies have been developed to face the huge data processing and assimilation into simulations using new technologies and compute resources. Finally, our total knowledge about the complex Earth system is contained in models and measurements, how we put them together has to be managed cleverly. The technical challenge is to put together databases and computing resources to answer the ES challenges. However all the applications are very intensive computing. Different compute solutions are available and depend on the characteristics of the applications. One of them is Grid especially efficient for independent or embarrassingly parallel jobs related to statistical and parametric studies. Numerous applications in atmospheric chemistry, meteorology, seismology, hydrology, pollution, climate and biodiversity have been deployed successfully on Grid. In order to fulfill requirements of risk management, several prototype applications have been deployed using OGC (Open geospatial Consortium) components with Grid middleware. The Grid has permitted via a huge number of runs to

  10. Power grids

    Viterbo, J.

    2012-01-01

    The implementation of renewable energies represents new challenges for electrical systems. The objective: making power grids smarter so they can handle intermittent production. The advent of smart grids will allow flexible operations like distributing energy in a multidirectional manner instead of just one way and it will make electrical systems capable of integrating actions by different users, consumers and producers in order to maintain efficient, sustainable, economical and secure power supplies. Practically speaking, they associate sensors, instrumentation and controls with information processing and communication systems in order to create massively automated networks. Smart grids require huge investments: for example more than 7 billion dollars have been invested in China and in the Usa in 2010 and France is ranked 9. worldwide with 265 million dollars invested. It is expected that smart grids will promote the development of new business models and a change in the value chain for energy. Decentralized production combined with the probable introduction of more or less flexible rates for sales or purchases and of new supplier-customer relationships will open the way to the creation of new businesses. (A.C.)

  11. Development of a Gridded Maritime Traffic DB for e-Navigation

    Kwang-Il Kim

    2014-12-01

    Full Text Available In the era of e-Navigation, it is important to deliver maritime traffic information from a shore based station to all navigating vessels. However, in a vessel boarding system, there is a limit to the amount of raw traffic data that can be processed. In this paper, we used the Automatic Identification System (AIS data as metadata to build up the maritime traffic gridded database by projecting traffic data on a geographic coordinate system. In order to apply this database to the image layer for transferring to the ship efficiently, we have developed a maritime traffic display layer and route traffic information layer. All simulated data was collected and analyzed with the AIS in a Vessel Traffic Service(VTS center.

  12. Grid generation methods

    Liseikin, Vladimir D

    2010-01-01

    This book is an introduction to structured and unstructured grid methods in scientific computing, addressing graduate students, scientists as well as practitioners. Basic local and integral grid quality measures are formulated and new approaches to mesh generation are reviewed. In addition to the content of the successful first edition, a more detailed and practice oriented description of monitor metrics in Beltrami and diffusion equations is given for generating adaptive numerical grids. Also, new techniques developed by the author are presented, in particular a technique based on the inverted form of Beltrami’s partial differential equations with respect to control metrics. This technique allows the generation of adaptive grids for a wide variety of computational physics problems, including grid clustering to given function values and gradients, grid alignment with given vector fields, and combinations thereof. Applications of geometric methods to the analysis of numerical grid behavior as well as grid ge...

  13. Development of a three-dimensional high-order strand-grids approach

    Tong, Oisin

    Development of a novel high-order flux correction method on strand grids is presented. The method uses a combination of flux correction in the unstructured plane and summation-by-parts operators in the strand direction to achieve high-fidelity solutions. Low-order truncation errors are cancelled with accurate flux and solution gradients in the flux correction method, thereby achieving a formal order of accuracy of 3, although higher orders are often obtained, especially for highly viscous flows. In this work, the scheme is extended to high-Reynolds number computations in both two and three dimensions. Turbulence closure is achieved with a robust version of the Spalart-Allmaras turbulence model that accommodates negative values of the turbulence working variable, and the Menter SST turbulence model, which blends the k-epsilon and k-o turbulence models for better accuracy. A major advantage of this high-order formulation is the ability to implement traditional finite volume-like limiters to cleanly capture shocked and discontinuous flows. In this work, this approach is explored via a symmetric limited positive (SLIP) limiter. Extensive verification and validation is conducted in two and three dimensions to determine the accuracy and fidelity of the scheme for a number of different cases. Verification studies show that the scheme achieves better than third order accuracy for low and high-Reynolds number flows. Cost studies show that in three-dimensions, the third-order flux correction scheme requires only 30% more walltime than a traditional second-order scheme on strand grids to achieve the same level of convergence. In order to overcome meshing issues at sharp corners and other small-scale features, a unique approach to traditional geometry, coined "asymptotic geometry," is explored. Asymptotic geometry is achieved by filtering out small-scale features in a level set domain through min/max flow. This approach is combined with a curvature based strand shortening

  14. Simulation platform developed to study and identify critical cases in a future smart grid

    Mihet-Popa, Lucian; Zong, Yi; You, Shi

    2016-01-01

    simulation and planning tools, with a particular objective on the challenges faced by the introduction of Smart Grid technologies. Another important issue of the paper is to identify critical load cases, as well as the voltage variations with the highest potential, able to implement the grid model...

  15. Identification of observables for future grids - The framework developed in the ELECTRA project

    Visscher, K.; Marinelli, M.; Morch, A.Z.; Jakobsen, S.H.

    2015-01-01

    The main subject of this paper is the classification and identification of observables for present and future grids. In order to make an inventory of present and potentially new observables, a systematic classification and identification of observables for future grids is conducted. After first

  16. Smart grids or smart users? : involving users in developing a low carbon electricity economy

    Verbong, G.P.J.; Beemsterboer, S.F.L.; Sengers, F.

    2013-01-01

    This article analyses practices and perceptions of stakeholders on including users in smart grids experiments in the Netherlands. In-depth interviews have been conducted and smart grid projects have been analysed, using a Strategic Niche Management framework. The analysis shows that there is a clear

  17. Integrating scientific data for drug discovery and development using the Life Sciences Grid.

    Dow, Ernst R; Hughes, James B; Stephens, Susie M; Narayan, Vaibhav A; Bishop, Richard W

    2009-06-01

    There are many daunting challenges for companies who wish to bring novel drugs to market. The information complexity around potential drug targets has increased greatly with the introduction of microarrays, high-throughput screening and other technological advances over the past decade, but has not yet fundamentally increased our understanding of how to modify a disease with pharmaceuticals. Further, the bar has been raised in getting a successful drug to market as just being new is no longer enough: the drug must demonstrate improved performance compared with the ever increasing generic pharmacopeia to gain support from payers and government authorities. In addition, partly as a consequence of a climate of concern regarding the safety of drugs, regulatory authorities have approved fewer new molecular entities compared to historical norms over the past few years. To overcome these challenges, the pharmaceutical industry must fully embrace information technology to bring better understood compounds to market. An important first step in addressing an unmet medical need is in understanding the disease and identifying the physiological target(s) to be modulated by the drug. Deciding which targets to pursue for a given disease requires a multidisciplinary effort that integrates heterogeneous data from many sources, including genetic variations of populations, changes in gene expression and biochemical assays. The Life Science Grid was developed to provide a flexible framework to integrate such diverse biological, chemical and disease information to help scientists make better-informed decisions. The Life Science Grid has been used to rapidly and effectively integrate scientific information in the pharmaceutical industry and has been placed in the open source community to foster collaboration in the life sciences community.

  18. 20 Plus Years of Chimera Grid Development for the Space Shuttle. STS-107, Return to Flight, End of the Program

    Gomez, Reynaldo J., III

    2010-01-01

    This slide presentation reviews the progress in grid development for the space shuttle, with particular focus on the development from the los of STS-107 and the return to flight, to the end of the program. Included are views from the current Space Shuttle Launch Vehicle (SSLV) grid system, containing 1.8 million surface points, and 95+ million volume points. Charts showing wind tunnel tests comparisons, and Computational fluid dynamics (CFD) vs 1A613B wing pressures, wind tunnel test comparison with CFD of the proposed ice/frost ramp configuration are shown. The use of pressure sensitive paint and particle imaging velocimetry was used to support debris transport tools, The actual creation of the grids and the use of overset CFD to assess the external tank redesign was also reviewed. It also asks was the use of the overset tool the right choice. The presentation ends with a review of the work to be done still.

  19. Percent Coverage

    National Oceanic and Atmospheric Administration, Department of Commerce — The Percent Coverage is a spreadsheet that keeps track of and compares the number of vessels that have departed with and without observers to the numbers of vessels...

  20. Development of grid-like applications for public health using Web 2.0 mashup techniques.

    Scotch, Matthew; Yip, Kevin Y; Cheung, Kei-Hoi

    2008-01-01

    Development of public health informatics applications often requires the integration of multiple data sources. This process can be challenging due to issues such as different file formats, schemas, naming systems, and having to scrape the content of web pages. A potential solution to these system development challenges is the use of Web 2.0 technologies. In general, Web 2.0 technologies are new internet services that encourage and value information sharing and collaboration among individuals. In this case report, we describe the development and use of Web 2.0 technologies including Yahoo! Pipes within a public health application that integrates animal, human, and temperature data to assess the risk of West Nile Virus (WNV) outbreaks. The results of development and testing suggest that while Web 2.0 applications are reasonable environments for rapid prototyping, they are not mature enough for large-scale public health data applications. The application, in fact a "systems of systems," often failed due to varied timeouts for application response across web sites and services, internal caching errors, and software added to web sites by administrators to manage the load on their servers. In spite of these concerns, the results of this study demonstrate the potential value of grid computing and Web 2.0 approaches in public health informatics.

  1. Development of new positive-grid alloy and its application to long-life batteries for automotive industry

    Furukawa, Jun; Nehyo, Y.; Shiga, S.

    Positive-grid corrosion and its resulting creep or growth is one of the major causes of the failure of automotive lead-acid batteries. The importance of grid corrosion and growth is increasing given the tendency for rising temperatures in the engine compartments of modern vehicles. In order to cope with this situation, a new lead alloy has been developed for positive-grids by utilizing an optimized combination of lead-calcium-tin and barium. In addition to enhanced mechanical strength at high temperature, the corrosion-resistance of the grid is improved by as much as two-fold so that the high temperature durability of batteries using such grids has been demonstrated in both hot SAE J240 tests and in field trials in Japan and Thailand. A further advantage of the alloy is its recycleability compared with alloys containing silver. The new alloy gives superior performance in both 12-V flooded and 36-V valve-regulated lead-acid (VRLA) batteries.

  2. New Generation GridPix: Development and characterisation of pixelated gaseous detectors based on the Timepix3 chip

    AUTHOR|(CDS)2082958; Hessey, Nigel

    Due to the increasing demands of high energy physics experiments there is a need for particle detectors which enable high precision measurements. In this regard, the GridPix detector is a novel detector concept which combines the benefits of a pixel chip with an integrated gas amplification structure. The resulting unit is a detector sensitive to single electrons with a great potential for particle tracking and energy loss measurements. This thesis is focusing on the development of a new generation of GridPix detectors based on the Timepix3 chip, which implements a high resolution Time to Digital Converter (TDC) in each pixel. After an introductory chapter describing the motivation behind GridPix, the manuscript presents the physics of gaseous detectors in chapter 2 along with the gaseous detectors used for particle tracking in chapter 3. Chapters 4 and 5 are focusing on the tracking performance of GridPix detectors. Chapter 4 presents results obtained with a GridPix detector based on a small scale prototy...

  3. Strengthening Health Systems of Developing Countries: Inclusion of Surgery in Universal Health Coverage.

    Okoroh, Juliet S; Chia, Victoria; Oliver, Emily A; Dharmawardene, Marisa; Riviello, Robert

    2015-08-01

    Universal health coverage (UHC) has its roots in the Universal Declaration of Human Rights and has recently gained momentum. Out-of-pocket payments (OPP) remain a significant barrier to care. There is an increasing global prevalence of non-communicable diseases, many of which are surgically treatable. We sought to provide a comparative analysis of the inclusion of surgical care in operating plans for UHC in low- and middle-income countries (LMIC). We systematically searched PubMed and Google Scholar using pre-defined criteria for articles published in English, Spanish, or French between January 1991 and November 2013. Keywords included "insurance," "OPP," "surgery," "trauma," "cancer," and "congenital anomalies." World Health Organization (WHO), World Bank, and Joint Learning Network for UHC websites were searched for supporting documents. Ministries of Health were contacted to provide further information on the inclusion of surgery. We found 696 articles and selected 265 for full-text review based on our criteria. Some countries enumerated surgical conditions in detail (India, 947 conditions). Other countries mentioned surgery broadly. Obstetric care was most commonly covered (19 countries). Solid organ transplantation was least covered. Cancer care was mentioned broadly, often without specifying the therapeutic modality. No countries were identified where hospitals are required to provide emergency care regardless of insurance coverage. OPP varied greatly between countries. Eighty percent of countries had OPP of 60% or more, making these services, even if partially covered, largely inaccessible. While OPP, delivery, and utilization continue to represent challenges to health care access in many LMICs, the inclusion of surgery in many UHC policies sets an important precedent in addressing a growing global prevalence of surgically treatable conditions. Barriers to access, including inequalities in financial protection in the form of high OPP, remain a fundamental

  4. Dynamics of social health insurance development: examining the determinants of Chinese basic health insurance coverage with panel data.

    Liu, Jun-Qiang

    2011-08-01

    Social health insurance (SHI) is gaining popularity in many developing countries, but there are few systematic empirical studies on the dynamics of SHI development. This study investigates the determinants of coverage of the Basic Healthcare Insurance for Urban Employees (BHI) in China. Using a panel database ranging from 1999 to 2007, the study finds that: (1) economic development plays a valuable role in BHI development; (2) strong financial capacity and administrative capacity in the government contributes to BHI progress; (3) higher trade union density is closely related to more rapid BHI expansion; and (4) taxation agencies are better at collecting SHI premiums. These findings provide evidence-based lessons for new and ongoing SHI programs. In addition, this article aims to make a more general contribution to the study of social policy development by expanding the scope of current theories on social policy development. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Analysis of aggregation and disaggregation effects for grid-based hydrological models and the development of improved precipitation disaggregation procedures for GCMs

    H. S. Wheater

    1999-01-01

    Full Text Available Appropriate representation of hydrological processes within atmospheric General Circulation Models (GCMs is important with respect to internal model dynamics (e.g. surface feedback effects on atmospheric fluxes, continental runoff production and to simulation of terrestrial impacts of climate change. However, at the scale of a GCM grid-square, several methodological problems arise. Spatial disaggregation of grid-square average climatological parameters is required in particular to produce appropriate point intensities from average precipitation. Conversely, aggregation of land surface heterogeneity is necessary for grid-scale or catchment scale application. The performance of grid-based hydrological models is evaluated for two large (104km2 UK catchments. Simple schemes, using sub-grid average of individual land use at 40 km scale and with no calibration, perform well at the annual time-scale and, with the addition of a (calibrated routing component, at the daily and monthly time-scale. Decoupling of hillslope and channel routing does not necessarily improve performance or identifiability. Scale dependence is investigated through application of distribution functions for rainfall and soil moisture at 100 km scale. The results depend on climate, but show interdependence of the representation of sub-grid rainfall and soil moisture distribution. Rainfall distribution is analysed directly using radar rainfall data from the UK and the Arkansas Red River, USA. Among other properties, the scale dependence of spatial coverage upon radar pixel resolution and GCM grid-scale, as well as the serial correlation of coverages are investigated. This leads to a revised methodology for GCM application, as a simple extension of current procedures. A new location-based approach using an image processing technique is then presented, to allow for the preservation of the spatial memory of the process.

  6. A model for the design and development of smart micro grids

    Torri, Giordano; Scaglia, Antonella; Brocca, Claudio

    2010-09-15

    Energy means secure sources, independence of provisions, reduction of CO2 emissions, efficiency, controllable costs. Diffusion of renewable energies means distributed generation, or generators installed anywhere, connected to grids in several points, random production. This paper describes a model of smart micro grids suitable for limited areas already served by existing networks and for remote zones where electricity is not available. This design integrates distributed generators, load controls and main grid exchange by using a power management system. Maximum energy efficiency and saving is the scope of the design as well as promotion of renewables. Some application cases are shown.

  7. Enabling Smart Grid Cosimulation Studies: Rapid Design and Development of the Technologies and Controls

    Hansen, Timothy M.; Kadavil, Rahul; Palmintier, Bryan; Suryanarayanan, Siddharth; Maciejewski, Anthony A.; Siegel, Howard Jay; Chong, Edwin K. P.; Hale, Elaine

    2016-03-01

    The 21st century electric power grid is transforming with an unprecedented increase in demand and increase in new technologies. In the United States Energy Independence and Security Act of 2007, Title XIII sets the tenets for modernizing the electricity grid through what is known as the 'Smart Grid Initiative.' This initiative calls for increased design, deployment, and integration of distributed energy resources, smart technologies and appliances, and advanced storage devices. The deployment of these new technologies requires rethinking and re-engineering the traditional boundaries between different electric power system domains.

  8. Development of a reference Phasor Measurement Unit (PMU for the monitoring and control of grid stability and quality

    Ndilimabaka Hervé

    2014-01-01

    Full Text Available This paper discusses the details of the development of a Phasor Measurement Unit regarding the requirements of the IEEE C37.118-2005 synchrophasor standard relative to steady-state conditions on grid monitoring and control. This phasor measurement unit is intended to be used for field tests sooner.

  9. Development of a reference Phasor Measurement Unit (PMU) for the monitoring and control of grid stability and quality

    Ndilimabaka, Hervé; Blanc, Isabelle

    2014-08-01

    This paper discusses the details of the development of a Phasor Measurement Unit regarding the requirements of the IEEE C37.118-2005 synchrophasor standard relative to steady-state conditions on grid monitoring and control. This phasor measurement unit is intended to be used for field tests sooner.

  10. Grid Development and a Study of B-flavour tagging at D0

    Lewis, Philip William

    2006-01-01

    Run IIa of the D0 experiment at the Tevatron took place between Spring 2002 and Spring 2006, collecting approximately 1.2 fb -1 of data. A fundamental principal of the D0 computing model is the utilization of globally distributed computing resources as part of a grid. In particular use is made of the 'SAMGrid'. The first part of this thesis describes the work undertaken at Imperial College on several D0 distributed computing projects. These included the deployment and development of parts of the SAMGrid software suite, and participation in the Winter 2003/2004 data reprocessing effort. One of the major goals of the D0 experiment is the observation of mixing in the B s 0 -meson system. The measurement of the mixing frequency is important as it can be used to constrain the CKM matrix, which describes CP violation in the Standard Model. The second part of this thesis describes the development of an opposite side flavour tagging algorithm and its calibration using B + and B d 0 meson decays. The application of this algorithm to an analysis of the B s 0 meson system is then described, which lead to the world's first two-sided limit on the B s 0 meson oscillation frequency (Δm s ) which was measured to lie in the interval between 17 ps -1 and 21 ps -1 at the 90% confidence level

  11. Development of Smart Grid for Community and Cyber based Landslide Hazard Monitoring and Early Warning System

    Karnawati, D.; Wilopo, W.; Fathani, T. F.; Fukuoka, H.; Andayani, B.

    2012-12-01

    A Smart Grid is a cyber-based tool to facilitate a network of sensors for monitoring and communicating the landslide hazard and providing the early warning. The sensor is designed as an electronic sensor installed in the existing monitoring and early warning instruments, and also as the human sensors which comprise selected committed-people at the local community, such as the local surveyor, local observer, member of the local task force for disaster risk reduction, and any person at the local community who has been registered to dedicate their commitments for sending reports related to the landslide symptoms observed at their living environment. This tool is designed to be capable to receive up to thousands of reports/information at the same time through the electronic sensors, text message (mobile phone), the on-line participatory web as well as various social media such as Twitter and Face book. The information that should be recorded/ reported by the sensors is related to the parameters of landslide symptoms, for example the progress of cracks occurrence, ground subsidence or ground deformation. Within 10 minutes, this tool will be able to automatically elaborate and analyse the reported symptoms to predict the landslide hazard and risk levels. The predicted level of hazard/ risk can be sent back to the network of electronic and human sensors as the early warning information. The key parameters indicating the symptoms of landslide hazard were recorded/ monitored by the electrical and the human sensors. Those parameters were identified based on the investigation on geological and geotechnical conditions, supported with the laboratory analysis. The cause and triggering mechanism of landslide in the study area was also analysed in order to define the critical condition to launch the early warning. However, not only the technical but also social system were developed to raise community awareness and commitments to serve the mission as the human sensors, which will

  12. Multi-Lab EV Smart Grid Integration Requirements Study. Providing Guidance on Technology Development and Demonstration

    Markel, T. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Meintz, A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hardy, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Bohn, T. [Argonne National Lab. (ANL), Argonne, IL (United States); Smart, J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Scoffield, D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hovsapian, R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Saxena, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); MacDonald, J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kiliccote, S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kahl, K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pratt, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-05-28

    The report begins with a discussion of the current state of the energy and transportation systems, followed by a summary of some VGI scenarios and opportunities. The current efforts to create foundational interface standards are detailed, and the requirements for enabling PEVs as a grid resource are presented. Existing technology demonstrations that include vehicle to grid functions are summarized. The report also includes a data-based discussion on the magnitude and variability of PEVs as a grid resource, followed by an overview of existing simulation tools that vi This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. can be used to explore the expansion of VGI to larger grid functions that might offer system and customer value. The document concludes with a summary of the requirements and potential action items that would support greater adoption of VGI.

  13. Identification of observables for future grids – the framework developed in the ELECTRA project

    Visscher, Klaas; Marinelli, Mattia; Morch, Andrei Z.; Jakobsson, Sigurd Hofsmo

    2015-01-01

    The main subject of this paper is the classification and identification of observables for present and future grids. In order to make an inventory of present and potentially new observables, a systematic classification and identification of observables for future grids is conducted. After first introducing some fundamental definitions for observables, observables are further classified by the characteristic time scale where they are used in the physical power system. For actual use in control...

  14. Development of a gridded meteorological dataset over Java island, Indonesia 1985-2014.

    Yanto; Livneh, Ben; Rajagopalan, Balaji

    2017-05-23

    We describe a gridded daily meteorology dataset consisting of precipitation, minimum and maximum temperature over Java Island, Indonesia at 0.125°×0.125° (~14 km) resolution spanning 30 years from 1985-2014. Importantly, this data set represents a marked improvement from existing gridded data sets over Java with higher spatial resolution, derived exclusively from ground-based observations unlike existing satellite or reanalysis-based products. Gap-infilling and gridding were performed via the Inverse Distance Weighting (IDW) interpolation method (radius, r, of 25 km and power of influence, α, of 3 as optimal parameters) restricted to only those stations including at least 3,650 days (~10 years) of valid data. We employed MSWEP and CHIRPS rainfall products in the cross-validation. It shows that the gridded rainfall presented here produces the most reasonable performance. Visual inspection reveals an increasing performance of gridded precipitation from grid, watershed to island scale. The data set, stored in a network common data form (NetCDF), is intended to support watershed-scale and island-scale studies of short-term and long-term climate, hydrology and ecology.

  15. Development and Execution of an Impact Cratering Application on a Computational Grid

    E. Huedo

    2005-01-01

    Full Text Available Impact cratering is an important geological process of special interest in Astrobiology. Its numerical simulation comprises the execution of a high number of tasks, since the search space of input parameter values includes the projectile diameter, the water depth and the impactor velocity. Furthermore, the execution time of each task is not uniform because of the different numerical properties of each experimental configuration. Grid technology is a promising platform to execute this kind of applications, since it provides the end user with a performance much higher than that achievable on any single organization. However, the scheduling of each task on a Grid involves challenging issues due to the unpredictable and heterogeneous behavior of both the Grid and the numerical code. This paper evaluates the performance of a Grid infrastructure based on the Globus toolkit and the GridWay framework, which provides the adaptive and fault tolerance functionality required to harness Grid resources, in the simulation of the impact cratering process. The experiments have been performed on a testbed composed of resources shared by five sites interconnected by RedIRIS, the Spanish Research and Education Network.

  16. Modelling noise propagation using Grid Resources. Progress within GDI-Grid

    Kiehle, Christian; Mayer, Christian; Padberg, Alexander; Stapelfeld, Hartmut

    2010-05-01

    Modelling noise propagation using Grid Resources. Progress within GDI-Grid. GDI-Grid (english: SDI-Grid) is a research project funded by the German Ministry for Science and Education (BMBF). It aims at bridging the gaps between OGC Web Services (OWS) and Grid infrastructures and identifying the potential of utilizing the superior storage capacities and computational power of grid infrastructures for geospatial applications while keeping the well-known service interfaces specified by the OGC. The project considers all major OGC webservice interfaces for Web Mapping (WMS), Feature access (Web Feature Service), Coverage access (Web Coverage Service) and processing (Web Processing Service). The major challenge within GDI-Grid is the harmonization of diverging standards as defined by standardization bodies for Grid computing and spatial information exchange. The project started in 2007 and will continue until June 2010. The concept for the gridification of OWS developed by lat/lon GmbH and the Department of Geography of the University of Bonn is applied to three real-world scenarios in order to check its practicability: a flood simulation, a scenario for emergency routing and a noise propagation simulation. The latter scenario is addressed by the Stapelfeldt Ingenieurgesellschaft mbH located in Dortmund adapting their LimA software to utilize grid resources. Noise mapping of e.g. traffic noise in urban agglomerates and along major trunk roads is a reoccurring demand of the EU Noise Directive. Input data requires road net and traffic, terrain, buildings and noise protection screens as well as population distribution. Noise impact levels are generally calculated in 10 m grid and along relevant building facades. For each receiver position sources within a typical range of 2000 m are split down into small segments, depending on local geometry. For each of the segments propagation analysis includes diffraction effects caused by all obstacles on the path of sound propagation

  17. Development or Deployment of 'Grid-Appropriate' Reactors for the Global Nuclear Energy Partnership

    Ingersoll, D. T.

    2008-01-01

    The world energy demand is expected to nearly double by 2030, largely driven by rapidly increasing demand in the developing parts of the world. Many of the countries that will experience the greatest growth in energy demand have little or no current nuclear power experience and have significant constraints on the size and type of power plant that can be accommodated. Although a few reactor vendors are beginning to address this market need, most traditional vendors continue to offer only very large nuclear power plants with capacities exceeding 1500 MWe per unit. The Global Nuclear Energy Partnership (GNEP), which was initiated in the United States and now includes a partnership of 20 countries, seeks to facilitate the large-scale global growth in nuclear power. Within the GNEP program, the 'grid-appropriate' reactors (GAR) campaign has been initiated to coordinate and facilitate the development, demonstration, and deployment of reactor designs that are better suited for those countries that need or prefer smaller power plant capacities. The GNEP/GAR program addresses the full spectrum of issues for the deployment of new reactor designs to new nuclear power countries, including: reactor technology and engineering, licensing and regulatory impacts, and infrastructure needs (physical, workforce, and institutional). Initially, the program is focused on meeting the current global demand for small or medium-sized reactors using demonstrated technologies. The program will also address the development of new reactor technologies that will further enhance the safety, security, and proliferation resistance of future designs. International collaborations are being established to: (1) develop suitable requirements and criteria for GAR designs, (2) conduct R and D for longer-term reactor technologies and innovative designs, and (3) assisting new nuclear power countries in assessing their infrastructure needs. The status of these activities will be presented and future program

  18. The CUNY Energy Institute Electrical Energy Storage Development for Grid Applications

    Banerjee, Sanjoy

    2013-03-31

    1. Project Objectives The objectives of the project are to elucidate science issues intrinsic to high energy density electricity storage (battery) systems for smart-grid applications, research improvements in such systems to enable scale-up to grid-scale and demonstrate a large 200 kWh battery to facilitate transfer of the technology to industry. 2. Background Complex and difficult to control interfacial phenomena are intrinsic to high energy density electrical energy storage systems, since they are typically operated far from equilibrium. One example of such phenomena is the formation of dendrites. Such dendrites occur on battery electrodes as they cycle, and can lead to internal short circuits, reducing cycle life. An improved understanding of the formation of dendrites and their control can improve the cycle life and safety of many energy storage systems, including rechargeable lithium and zinc batteries. Another area where improved understanding is desirable is the application of ionic liquids as electrolytes in energy storage systems. An ionic liquid is typically thought of as a material that is fully ionized (consisting only of anions and cations) and is fluid at or near room temperature. Some features of ionic liquids include a generally high thermal stability (up to 450 °C), a high electrochemical window (up to 6 V) and relatively high intrinsic conductivities. Such features make them attractive as battery or capacitor electrolytes, and may enable batteries which are safer (due to the good thermal stability) and of much higher energy density (due to the higher voltage electrode materials which may be employed) than state of the art secondary (rechargeable) batteries. Of particular interest is the use of such liquids as electrolytes in metal air batteries, where energy densities on the order of 1-2,000 Wh / kg are possible; this is 5-10 times that of existing state of the art lithium battery technology. The Energy Institute has been engaged in the

  19. The development of universal health insurance coverage in Thailand: Challenges of population aging and informal economy.

    Hsu, Minchung; Huang, Xianguo; Yupho, Somrasri

    2015-11-01

    This paper quantitatively investigates the sustainability of the universal health insurance coverage (UHI) system in Thailand while taking into account the country's rapidly aging population and large informal labor sector. We examine the effects of population aging and informal employment across three tax options for financing the UHI. A modern dynamic general equilibrium framework is utilized to conduct policy experiments and welfare analysis. In the case of labor income tax being used to finance the cost of UHI, an additional 11-15% of labor tax will be required with the 2050 population age structure, compared with the 2005 benchmark economy. We also find that an expansion of income tax base to the informal sector can substantially alleviate the tax burden. Based on welfare comparisons across the alternative tax options, the labor income tax is the most preferred because the inequality between formal/informal sectors is large. If the informal sector cannot avoid labor income tax, capital tax will be preferred over labor and consumption taxes. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Development of Vegetation-Pervious Concrete in Grid Beam System for Soil Slope Protection

    Bao, Xiaohua; Liao, Wenyu; Dong, Zhijun; Wang, Shanyong; Tang, Waiching

    2017-01-01

    One of the most efficient and environmentally friendly methods for preventing a landslide on a slope is to vegetate it. Vegetation-pervious concretes have a promising potential for soil protection. In this study, the vegetation-pervious concrete with low alkalinity was developed and studied. Combined with a grid beam structure system, the stability and strength between the vegetation-pervious concrete and base soil are believed to be enhanced effectively. For improving plant adaptability, the alkalinity of concrete can be decreased innovatively by adding a self-designed admixture into the cement paste. The effects of the admixture content on alkalinity and compressive strength of the hardened pervious concrete were investigated using X-ray diffraction (XRD) and compression test, respectively. Meanwhile, the permeability of the vegetation-pervious concrete was studied as well. Through comparing with ordinary pervious concrete, the effect of low alkaline pervious concrete on vegetation growth was investigated in a small-scale field for ten weeks. The test results indicated that the alkalinity of the cement samples decreased with the increase of admixture content, and the vegetation grew successfully on previous concrete. By increasing the admixture content to approximately 3.6%, the compressive strength of pervious concrete was more than 25 MPa. PMID:28772454

  1. Coverage Metrics for Model Checking

    Penix, John; Visser, Willem; Norvig, Peter (Technical Monitor)

    2001-01-01

    When using model checking to verify programs in practice, it is not usually possible to achieve complete coverage of the system. In this position paper we describe ongoing research within the Automated Software Engineering group at NASA Ames on the use of test coverage metrics to measure partial coverage and provide heuristic guidance for program model checking. We are specifically interested in applying and developing coverage metrics for concurrent programs that might be used to support certification of next generation avionics software.

  2. Safe Grid

    Chow, Edward T.; Stewart, Helen; Korsmeyer, David (Technical Monitor)

    2003-01-01

    The biggest users of GRID technologies came from the science and technology communities. These consist of government, industry and academia (national and international). The NASA GRID is moving into a higher technology readiness level (TRL) today; and as a joint effort among these leaders within government, academia, and industry, the NASA GRID plans to extend availability to enable scientists and engineers across these geographical boundaries collaborate to solve important problems facing the world in the 21 st century. In order to enable NASA programs and missions to use IPG resources for program and mission design, the IPG capabilities needs to be accessible from inside the NASA center networks. However, because different NASA centers maintain different security domains, the GRID penetration across different firewalls is a concern for center security people. This is the reason why some IPG resources are been separated from the NASA center network. Also, because of the center network security and ITAR concerns, the NASA IPG resource owner may not have full control over who can access remotely from outside the NASA center. In order to obtain organizational approval for secured remote access, the IPG infrastructure needs to be adapted to work with the NASA business process. Improvements need to be made before the IPG can be used for NASA program and mission development. The Secured Advanced Federated Environment (SAFE) technology is designed to provide federated security across NASA center and NASA partner's security domains. Instead of one giant center firewall which can be difficult to modify for different GRID applications, the SAFE "micro security domain" provide large number of professionally managed "micro firewalls" that can allow NASA centers to accept remote IPG access without the worry of damaging other center resources. The SAFE policy-driven capability-based federated security mechanism can enable joint organizational and resource owner approved remote

  3. Immunization Coverage

    ... room/fact-sheets/detail/immunization-coverage","@context":"http://schema.org","@type":"Article"}; العربية 中文 français русский español ... Plan Global Health Observatory (GHO) data - Immunization More information on vaccines and immunization News 1 in 10 ...

  4. Development of gridded solar radiation data over Belgium based on Meteosat and in-situ observations

    Journée, Michel; Vanderveken, Gilles; Bertrand, Cédric

    2013-04-01

    Knowledge on solar resources is highly important for all forms of solar energy applications. With the recent development in solar-based technologies national meteorological services are faced with increasing demands for high-quality and reliable site-time specific solar resource information. Traditionally, solar radiation is observed by means of networks of meteorological stations. Costs for installation and maintenance of such networks are very high and national networks comprise only few stations. Consequently the availability of ground-based solar radiation measurements has proven to be spatially and temporally inadequate for many applications. To overcome such a limitation, a major effort has been undertaken at the Royal Meteorological Institute of Belgium (RMI) to provide the solar energy industry, the electricity sector, governments, and renewable energy organizations and institutions with the most suitable and accurate information on the solar radiation resources at the Earth's surface over the Belgian territory. Only space-based observations can deliver a global coverage of the solar irradiation impinging on horizontal surface at the ground level. Because only geostationary data allow to capture the diurnal cycle of the solar irradiance at the Earth's surface, a method that combines information from Meteosat Second Generation satellites and ground-measurement has been implemented at RMI to generate high resolution solar products over Belgium on an operational basis. Besides these new products, the annual and seasonal variability of solar energy resource was evaluated, solar radiation climate zones were defined and the recent trend in solar radiation was characterized.

  5. Grid Development and a Study of B-flavour tagging at D0

    Lewis, Philip William [Imperial College, London (United Kingdom)

    2006-09-01

    Run IIa of the D0 experiment at the Tevatron took place between Spring 2002 and Spring 2006, collecting approximately 1.2 fb-1 of data. A fundamental principal of the D0 computing model is the utilization of globally distributed computing resources as part of a grid. In particular use is made of the 'SAMGrid'. The first part of this thesis describes the work undertaken at Imperial College on several D0 distributed computing projects. These included the deployment and development of parts of the SAMGrid software suite, and participation in the Winter 2003/2004 data reprocessing effort. One of the major goals of the D0 experiment is the observation of mixing in the B$0\\atop{s}$-meson system. The measurement of the mixing frequency is important as it can be used to constrain the CKM matrix, which describes CP violation in the Standard Model. The second part of this thesis describes the development of an opposite side flavour tagging algorithm and its calibration using B+ and B$0\\atop{d}$ meson decays. The application of this algorithm to an analysis of the B$0\\atop{s}$ meson system is then described, which lead to the world's first two-sided limit on the B$0\\atop{s}$ meson oscillation frequency (Δms) which was measured to lie in the interval between 17 ps-1 and 21 ps-1 at the 90% confidence level.

  6. Development of a software application to evaluate the performance and energy losses of grid-connected photovoltaic systems

    Trillo-Montero, D.; Santiago, I.; Luna-Rodriguez, J.J.; Real-Calvo, R.

    2014-01-01

    Highlights: • Software application to perform an automated analysis of grid-connected PV systems. • It integrates data from all devices registering data on typical PV installations. • Flexible to analyze installations with different configurations and components. • An analysis of two grid-connected PV systems located in Andalusia, was performed. • Temperature losses in summer months varying between 15% and 25% of energy production. - Abstract: The aim of this paper was to design and develop a software application that enables users to perform an automated analysis of data from the monitoring of grid-connected photovoltaic (PV) systems. This application integrates data from all devices already in operation such as environmental sensors, inverters and meters, which record information on typical PV installations. This required the development of a Relational Database Management System (RDBMS), consisting of a series of linked databases, enabling all PV system information to be stored; and a software, called S·lar, which enables all information from the monitoring to be automatically migrated to the database as well as determining some standard magnitudes related to performances and losses of PV installation components at different time scales. A visualization tool, which is both graphical and numerical, makes access to all of the information be a simple task. Moreover, the application enables relationships between parameters and/or magnitudes to be easily established. Furthermore, it can perform a preliminary analysis of the influence of PV installations on the distribution grids where the produced electricity is injected. The operation of such a software application was implemented by performing the analysis of two grid-connected PV installations located in Andalusia, Spain, via data monitoring therein. The monitoring took place from January 2011 to May 2012

  7. Development policy for non-grid-connected wind power in China: An analysis based on institutional change

    Fang Yong; Li Jing; Wang Mingming

    2012-01-01

    Government policy continues to play a crucial role in the development of wind power industry in China. The 2005 “Renewable Energy Law” and related policies have driven the rapid increase in wind power installed capacity in China over the past half-decade, with capacity doubling annually since 2005. However, a large number of wind farms generate electricity well below their installed capacity, resulting in considerable wastage of resources. Non-grid-connected wind power theory proposes that large-scale wind power output does not necessarily have to be fed into the grid, but can be used directly in industrial production. Thus, the use of the theory can promote the sustainable development of the wind power industry by obviating the need for power grid. In this paper we analyze the influence of government policy on wind power industry from the perspective of institutional change, by employing the basic theories of new institutional economics. A development model for non-grid-connected wind power is proposed in order to implement institutional change in accordance with the specific characteristics of wind power industry in China. This model requires the government to play an active role in institutional development by increasing economic efficiency in order to promote the sustainable development of wind power. - Highlights: ► New institutional economics-based analysis paradigm for wind power policy proposed. ► Policies for China's wind power industry analyzed according to the paradigm. ► Hybrid development mode of institutional change is the best pathway for wind power. ► Potential development policy for China's wind power industry recommended.

  8. Suburban Housing Development and Off-Grid Electric Power Supply Assessment for North-Central Nigeria

    Ibikunle Olalekan Ogundari

    2017-01-01

    Full Text Available Energy infrastructures in North-Central Nigeria are inadequate and grid electricity is unable to meet suburban housing electricity demand. The alternative power-supply options proposed by government for the region require appropriation analysis for selection. Four public housing estates in suburban Abuja are selected for electricity demand analysis under conventional and energy-efficient lighting scenarios; then techno-economic parameters of two off-grid electric power supply systems (PV and Diesel-powered generation to meet these electricity demands are evaluated. An energy techno-economic assessment methodology is used. The study determines the energy-efficient lighting system is appropriate with 40% energy savings relative to the Conventional Lighting Systems. The diesel generator alternative power-supply option has Life Cycle Costs almost 4 times those of the PV option. The study established the PV-energy-efficient lighting system as the most feasible off-grid electric power supply alternative for implementation.

  9. Development of Resource Sharing System Components for AliEn Grid Infrastructure

    Harutyunyan, Artem

    2010-01-01

    The problem of the resource provision, sharing, accounting and use represents a principal issue in the contemporary scientific cyberinfrastructures. For example, collaborations in physics, astrophysics, Earth science, biology and medicine need to store huge amounts of data (of the order of several petabytes) as well as to conduct highly intensive computations. The appropriate computing and storage capacities cannot be ensured by one (even very large) research center. The modern approach to the solution of this problem suggests exploitation of computational and data storage facilities of the centers participating in collaborations. The most advanced implementation of this approach is based on Grid technologies, which enable effective work of the members of collaborations regardless of their geographical location. Currently there are several tens of Grid infrastructures deployed all over the world. The Grid infrastructures of CERN Large Hadron Collider experiments - ALICE, ATLAS, CMS, and LHCb which are exploi...

  10. Gas infrastructure: Does the grid development go in the wrong direction?; Gasinfrastruktur. Stellt der Netzentwicklungsplan die falschen Weichen?

    Buex, Arno [Storengy Deutschland GmbH, Berlin (Germany)

    2012-11-15

    The German natural gas market is in a period of strong transition. Gas is rapidly becoming a key resource as it is a low-emission resource whose supply is ensured on a long-term basis. Best of all, natural gas offers high flexibility, which is getting increasingly important in the context of energy transition, growing gas imports, and growing importance of the spot market. Flexibility, in turn, necessitates consequent development of grid capacities and gas stores. In order to establish and coordinate the demand, the gas grid development plan for Germany ('Netzentwicklungsplan Gas' -NEP) required by the EnWG (Renewables Act) is currently under development. marketers are still not in agreement as to how the natural gas infrastructure of the future should be designed. Proposed solutions, scenarios and recommendations are current issues of a controversial discussion concerning the NEP Gas 2013. Especially from the view of gas store operators, the picture is critical. (orig.)

  11. Spiking neurons in a hierarchical self-organizing map model can learn to develop spatial and temporal properties of entorhinal grid cells and hippocampal place cells.

    Praveen K Pilly

    Full Text Available Medial entorhinal grid cells and hippocampal place cells provide neural correlates of spatial representation in the brain. A place cell typically fires whenever an animal is present in one or more spatial regions, or places, of an environment. A grid cell typically fires in multiple spatial regions that form a regular hexagonal grid structure extending throughout the environment. Different grid and place cells prefer spatially offset regions, with their firing fields increasing in size along the dorsoventral axes of the medial entorhinal cortex and hippocampus. The spacing between neighboring fields for a grid cell also increases along the dorsoventral axis. This article presents a neural model whose spiking neurons operate in a hierarchy of self-organizing maps, each obeying the same laws. This spiking GridPlaceMap model simulates how grid cells and place cells may develop. It responds to realistic rat navigational trajectories by learning grid cells with hexagonal grid firing fields of multiple spatial scales and place cells with one or more firing fields that match neurophysiological data about these cells and their development in juvenile rats. The place cells represent much larger spaces than the grid cells, which enable them to support navigational behaviors. Both self-organizing maps amplify and learn to categorize the most frequent and energetic co-occurrences of their inputs. The current results build upon a previous rate-based model of grid and place cell learning, and thus illustrate a general method for converting rate-based adaptive neural models, without the loss of any of their analog properties, into models whose cells obey spiking dynamics. New properties of the spiking GridPlaceMap model include the appearance of theta band modulation. The spiking model also opens a path for implementation in brain-emulating nanochips comprised of networks of noisy spiking neurons with multiple-level adaptive weights for controlling autonomous

  12. Sustainable Development of Renewable Energy Mini-grids for Energy Access: A Framework for Policy Design

    Deshmukh, Ranjit [Univ. of California, Berkeley, CA (United States); Carvallo, Juan Pablo [Univ. of California, Berkeley, CA (United States); Gambhir, Ashwin [Univ. of California, Berkeley, CA (United States)

    2013-03-01

    We emphasize the importance of concurrently considering all components of a mini-grid policy, designing each component through the lenses of different stakeholders, and fostering mini-grids as an integral part of a country’s electricity access efforts. Policymakers have multiple options, and it is the combination of these in the institutional and financial capacity of the government context that will decide the success of the program. There are no silver bullet solutions, but a thorough understanding of the existing technical and institutional capacities, as well as the stakeholders’ interests and sociocultural context will enable the design of an effective policy instrument.

  13. Model-driven development of smart grid services using SoaML

    Kosek, Anna Magdalena; Gehrke, Oliver

    2014-01-01

    This paper presents a model-driven software devel- opment process which can be applied to the design of smart grid services. The Service Oriented Architecture Modelling Language (SoaML) is used to describe the architecture as well as the roles and interactions between service participants....... The individual modelling steps and an example design of a SoaML model for a voltage control service are presented and explained. Finally, the paper discusses a proof-of-concept implementation of the modelled service in a smart grid testing laboratory....

  14. Development of an international matrix-solver prediction system on a French-Japanese international grid computing environment

    Suzuki, Yoshio; Kushida, Noriyuki; Tatekawa, Takayuki; Teshima, Naoya; Caniou, Yves; Guivarch, Ronan; Dayde, Michel; Ramet, Pierre

    2010-01-01

    The 'Research and Development of International Matrix-Solver Prediction System (REDIMPS)' project aimed at improving the TLSE sparse linear algebra expert website by establishing an international grid computing environment between Japan and France. To help users in identifying the best solver or sparse linear algebra tool for their problems, we have developed an interoperable environment between French and Japanese grid infrastructures (respectively managed by DIET and AEGIS). Two main issues were considered. The first issue is how to submit a job from DIET to AEGIS. The second issue is how to bridge the difference of security between DIET and AEGIS. To overcome these issues, we developed APIs to communicate between different grid infrastructures by improving the client API of AEGIS. By developing a server deamon program (SeD) of DIET which behaves like an AEGIS user, DIET can call functions in AEGIS: authentication, file transfer, job submission, and so on. To intensify the security, we also developed functionalities to authenticate DIET sites and DIET users in order to access AEGIS computing resources. By this study, the set of software and computers available within TLSE to find an appropriate solver is enlarged over France (DIET) and Japan (AEGIS). (author)

  15. LHC computing grid

    Novaes, Sergio

    2011-01-01

    Full text: We give an overview of the grid computing initiatives in the Americas. High-Energy Physics has played a very important role in the development of grid computing in the world and in Latin America it has not been different. Lately, the grid concept has expanded its reach across all branches of e-Science, and we have witnessed the birth of the first nationwide infrastructures and its use in the private sector. (author)

  16. The Necessity of a New Type Test Rig for the Development of an Evaluation Method in Grid Fretting Problems

    Lee, Young-Ho; Kim, Hyung-Kyu

    2007-01-01

    A grid fretting problem is recognized as one of the most important degradation mechanisms even though the examination results of fretting experiments could be applied to the development and design of spacer grid structures. This is because it is difficult to develop a fretting wear model for a grid fretting problem due to the various wear mechanisms involved according to the mechanical and environmental variables, the contact condition with a spring/dimple and the material properties. A number of spring shapes has been developed in KAERI and their performance tests such as fretting wear, flow-induced vibration (FIV) tests, etc. have been carried out from a part unit to a full assembly scale. From the unit part fretting test results, one of the noticeable results is that the contacting force (normal load) was gradually decreased with increasing number of fretting cycles due to a depth increase and this behavior was closely related to the contacting spring shape. When considering the actual contact condition between a fuel rod and a spring/dimple, if a fretting wear progresses due to a FIV under a specific normal load exerted on the fuel rod by an elastic deformation of the spring, the contacting force between the fuel rod and dimple that are located in the opposite side should be decreased. Consequently, an evaluation of developed spacer grids against fretting wear damage should be performed with the results of 1x1 cell unit experiments because a contacting force is one of the most important variables that influences a fretting wear mechanism. The discussion was focused on the development procedure of a new test rig and its performance by using a 1x1 cell unit test rig. (authors)

  17. Development and modeling of different scenarios for a smart distribution grid

    Mihet-Popa, Lucian; Han, Xue; Bindner, Henrik W.

    2013-01-01

    customer. The aim of the model is to design, implement and test the proposed configuration and to investigate whether the low-voltage distributed grid is prepared for the expected future increase of PV penetration with heat pumps and electric cars connected along the feeders. The model is implemented...

  18. Considerations on smart grid developments and impacts on transmission operation and planning

    Ribeiro, P.F.; Nguyen, P.H.; Kling, W.L.

    2012-01-01

    This paper discusses some historical and technical events, particularly in USA and Europe, over the last few years, that are aimed at modernizing the electric power grid. The paper also looks at possible impacts on transmission operation and planning as the system moves from a centralized to a

  19. Smart grid application in development countries : smart electricifcation : Indian case study

    Upadhyay, G.

    2012-01-01

    A recent report has shown that there are 400 million people in India are without electricity. This work investigates the smart grid application in India for rural/remote electrification and its economic benefits. A field trip was organised to an unelectrified village in India to understand the

  20. Renewables-Friendly Grid Development Strategies. Experience in the United States, Potential Lessons for China

    Hurlbut, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Lab. (NREL), Golden, CO (United States); Porter, Kevin [Exeter Associates, Columbia, MD (United States); Arent, Douglas J. [Joint Inst. for Strategic Energy Analysis, Golden, CO (United States)

    2015-10-01

    This report aims to help China's reform effort by providing a concise summary of experience in the United States with "renewables-friendly"" grid management, focusing on experiences that might be applicable to China. It focuses on utility-scale renewables and sets aside issues related to distributed generation.

  1. A design-driven approach for developing new products for Smart Grid Houdeholds

    Obinna, U.; Reinders, Angelina H.M.E.; Joore, P.; Wauben, L.

    2014-01-01

    The transition of the electricity system to smart grids requires residential end-users to be more involved in managing energy demand and supply. New innovative products and services could help to support end-users to play a more active role in the management of the future electric power system. This

  2. Development of stable Grid service at the next generation system of KEKCC

    Nakamura, T.; Iwai, G.; Matsunaga, H.; Murakami, K.; Sasaki, T.; Suzuki, S.; Takase, W.

    2017-10-01

    A lot of experiments in the field of accelerator based science are actively running at High Energy Accelerator Research Organization (KEK) by using SuperKEKB and J-PARC accelerator in Japan. In these days at KEK, the computing demand from the various experiments for the data processing, analysis, and MC simulation is monotonically increasing. It is not only for the case with high-energy experiments, the computing requirement from the hadron and neutrino experiments and some projects of astro-particle physics is also rapidly increasing due to the very high precision measurement. Under this situation, several projects, Belle II, T2K, ILC and KAGRA experiments supported by KEK are going to utilize Grid computing infrastructure as the main computing resource. The Grid system and services in KEK, which is already in production, are upgraded for the further stable operation at the same time of whole scale hardware replacement of KEK Central Computer System (KEKCC). The next generation system of KEKCC starts the operation from the beginning of September 2016. The basic Grid services e.g. BDII, VOMS, LFC, CREAM computing element and StoRM storage element are made by the more robust hardware configuration. Since the raw data transfer is one of the most important tasks for the KEKCC, two redundant GridFTP servers are adapted to the StoRM service instances with 40 Gbps network bandwidth on the LHCONE routing. These are dedicated to the Belle II raw data transfer to the other sites apart from the servers for the data transfer usage of the other VOs. Additionally, we prepare the redundant configuration for the database oriented services like LFC and AMGA by using LifeKeeper. The LFC servers are made by two read/write servers and two read-only servers for the Belle II experiment, and all of them have an individual database for the purpose of load balancing. The FTS3 service is newly deployed as a service for the Belle II data distribution. The service of CVMFS stratum-0 is

  3. A framework supporting the development of a Grid portal for analysis based on ROI.

    Ichikawa, K; Date, S; Kaishima, T; Shimojo, S

    2005-01-01

    In our research on brain function analysis, users require two different simultaneous types of processing: interactive processing to a specific part of data and high-performance batch processing to an entire dataset. The difference between these two types of processing is in whether or not the analysis is for data in the region of interest (ROI). In this study, we propose a Grid portal that has a mechanism to freely assign computing resources to the users on a Grid environment according to the users' two different types of processing requirements. We constructed a Grid portal which integrates interactive processing and batch processing by the following two mechanisms. First, a job steering mechanism controls job execution based on user-tagged priority among organizations with heterogeneous computing resources. Interactive jobs are processed in preference to batch jobs by this mechanism. Second, a priority-based result delivery mechanism that administrates a rank of data significance. The portal ensures a turn-around time of interactive processing by the priority-based job controlling mechanism, and provides the users with quality of services (QoS) for interactive processing. The users can access the analysis results of interactive jobs in preference to the analysis results of batch jobs. The Grid portal has also achieved high-performance computation of MEG analysis with batch processing on the Grid environment. The priority-based job controlling mechanism has been realized to freely assign computing resources to the users' requirements. Furthermore the achievement of high-performance computation contributes greatly to the overall progress of brain science. The portal has thus made it possible for the users to flexibly include the large computational power in what they want to analyze.

  4. The Grid

    Klotz, Wolf-Dieter

    2005-01-01

    Grid technology is widely emerging. Grid computing, most simply stated, is distributed computing taken to the next evolutionary level. The goal is to create the illusion of a simple, robust yet large and powerful self managing virtual computer out of a large collection of connected heterogeneous systems sharing various combinations of resources. This talk will give a short history how, out of lessons learned from the Internet, the vision of Grids was born. Then the extensible anatomy of a Grid architecture will be discussed. The talk will end by presenting a selection of major Grid projects in Europe and US and if time permits a short on-line demonstration.

  5. Smart grid technologies in local electric grids

    Lezhniuk, Petro D.; Pijarski, Paweł; Buslavets, Olga A.

    2017-08-01

    The research is devoted to the creation of favorable conditions for the integration of renewable sources of energy into electric grids, which were designed to be supplied from centralized generation at large electric power stations. Development of distributed generation in electric grids influences the conditions of their operation - conflict of interests arises. The possibility of optimal functioning of electric grids and renewable sources of energy, when complex criterion of the optimality is balance reliability of electric energy in local electric system and minimum losses of electric energy in it. Multilevel automated system for power flows control in electric grids by means of change of distributed generation of power is developed. Optimization of power flows is performed by local systems of automatic control of small hydropower stations and, if possible, solar power plants.

  6. The Development of Models for Assessment of the Geomagnetically Induced Currents Impact on Electric Power Grids during Geomagnetic Storms

    VAKHNINA, V. V.

    2015-02-01

    Full Text Available A model and an algorithm for the calculation of the functioning of an electric power grid of arbitrary configuration and complexity during geomagnetic storms were developed. The calculations were performed in the MATLAB mathematical package and the Simulink environment. The binding of objects to geographical coordinates is realized in the model, which enables to determine the matrix of potentials of geoelectric fields in nodal points. In order to define the instantaneous magnetizing currents, the power transformers are designed on the basis of the T-shaped equivalent circuit with a nonlinear mutual inductance of magnetization branch. Calculation of RMS values of active, reactive and total power values in all the elements is done with regard to the impact of harmonic components of the current and voltage. The results of modeling of the impact of geomagnetic storms of various intensity with the west-east direction of the geoelectric field vector for Samara region electric power grid are given.

  7. Real-space grids and the Octopus code as tools for the development of new simulation approaches for electronic systems

    Andrade, Xavier; Strubbe, David; De Giovannini, Umberto; Larsen, Ask Hjorth; Oliveira, Micael J. T.; Alberdi-Rodriguez, Joseba; Varas, Alejandro; Theophilou, Iris; Helbig, Nicole; Verstraete, Matthieu J.; Stella, Lorenzo; Nogueira, Fernando; Aspuru-Guzik, Alán; Castro, Alberto; Marques, Miguel A. L.; Rubio, Angel

    Real-space grids are a powerful alternative for the simulation of electronic systems. One of the main advantages of the approach is the flexibility and simplicity of working directly in real space where the different fields are discretized on a grid, combined with competitive numerical performance and great potential for parallelization. These properties constitute a great advantage at the time of implementing and testing new physical models. Based on our experience with the Octopus code, in this article we discuss how the real-space approach has allowed for the recent development of new ideas for the simulation of electronic systems. Among these applications are approaches to calculate response properties, modeling of photoemission, optimal control of quantum systems, simulation of plasmonic systems, and the exact solution of the Schr\\"odinger equation for low-dimensionality systems.

  8. Grid Data Management and Customer Demands at MeteoSwiss

    Rigo, G.; Lukasczyk, Ch.

    2010-09-01

    Data grids constitute the required input form for a variety of applications. Therefore, customers increasingly expect climate services to not only provide measured data, but also grids of these with the required configurations on an operational basis. Currently, MeteoSwiss is establishing a production chain for delivering data grids by subscription directly from the data warehouse in order to meet the demand for precipitation data grids by governmental, business and science customers. The MeteoSwiss data warehouse runs on an Oracle database linked with an ArcGIS Standard edition geodatabase. The grids are produced by Unix-based software written in R called GRIDMCH which extracts the station data from the data warehouse and stores the files in the file system. By scripts, the netcdf-v4 files are imported via an FME interface into the database. Currently daily and monthly deliveries of daily precipitation grids are available from MeteoSwiss with a spatial resolution of 2.2km x 2.2km. These daily delivered grids are a preliminary based on 100 measuring sites whilst the grid of the monthly delivery of daily sums is calculated out of about 430 stations. Crucial for the absorption by the customers is the understanding of and the trust into the new grid product. Clearly stating needs which can be covered by grid products, the customers require a certain lead time to develop applications making use of the particular grid. Therefore, early contacts and a continuous attendance as well as flexibility in adjusting the production process to fulfill emerging customer needs are important during the introduction period. Gridding over complex terrain can lead to temporally elevated uncertainties in certain areas depending on the weather situation and coverage of measurements. Therefore, careful instructions on the quality and use and the possibility to communicate the uncertainties of gridded data proofed to be essential especially to the business and science customers who require

  9. Urban micro-grids

    Faure, Maeva; Salmon, Martin; El Fadili, Safae; Payen, Luc; Kerlero, Guillaume; Banner, Arnaud; Ehinger, Andreas; Illouz, Sebastien; Picot, Roland; Jolivet, Veronique; Michon Savarit, Jeanne; Strang, Karl Axel

    2017-02-01

    ENEA Consulting published the results of a study on urban micro-grids conducted in partnership with the Group ADP, the Group Caisse des Depots, ENEDIS, Omexom, Total and the Tuck Foundation. This study offers a vision of the definition of an urban micro-grid, the value brought by a micro-grid in different contexts based on real case studies, and the upcoming challenges that micro-grid stakeholders will face (regulation, business models, technology). The electric production and distribution system, as the backbone of an increasingly urbanized and energy dependent society, is urged to shift towards a more resilient, efficient and environment-friendly infrastructure. Decentralisation of electricity production into densely populated areas is a promising opportunity to achieve this transition. A micro-grid enhances local production through clustering electricity producers and consumers within a delimited electricity network; it has the ability to disconnect from the main grid for a limited period of time, offering an energy security service to its customers during grid outages for example. However: The islanding capability is an inherent feature of the micro-grid concept that leads to a significant premium on electricity cost, especially in a system highly reliant on intermittent electricity production. In this case, a smart grid, with local energy production and no islanding capability, can be customized to meet relevant sustainability and cost savings goals at lower costs For industrials, urban micro-grids can be economically profitable in presence of high share of reliable energy production and thermal energy demand micro-grids face strong regulatory challenges that should be overcome for further development Whether islanding is or is not implemented into the system, end-user demand for a greener, more local, cheaper and more reliable energy, as well as additional services to the grid, are strong drivers for local production and consumption. In some specific cases

  10. Use of fundamental condensation heat transfer experiments for the development of a sub-grid liquid jet condensation model

    Buschman, Francis X., E-mail: Francis.Buschman@unnpp.gov; Aumiller, David L.

    2017-02-15

    Highlights: • Direct contact condensation data on liquid jets up to 1.7 MPa in pure steam and in the presence of noncondensable gas. • Identified a pressure effect on the impact of noncondensables to suppress condensation heat transfer not captured in existing data or correlations. • Pure steam data is used to develop a new correlation for condensation heat transfer on subcooled liquid jets. • Noncondensable data used to develop a modification to the renewal time estimate used in the Young and Bajorek correlation for condensation suppression in the presence of noncondensables. • A jet injection boundary condition, using a sub-grid jet condensation model, is developed for COBRA-IE which provides a more detailed estimate of the condensation rate on the liquid jet and allows the use of jet specific closure relationships. - Abstract: Condensation on liquid jets is an important phenomenon for many different facets of nuclear power plant transients and analyses such as containment spray cooling. An experimental facility constructed at the Pennsylvania State University, the High Pressure Liquid Jet Condensation Heat Transfer facility (HPLJCHT), has been used to perform steady-state condensation heat transfer experiments in which the temperature of the liquid jet is measured at different axial locations allowing the condensation rate to be determined over the jet length. Test data have been obtained in a pure steam environment and with varying concentrations of noncondensable gas. This data extends the available jet condensation data from near atmospheric pressure up to a pressure of 1.7 MPa. An empirical correlation for the liquid side condensation heat transfer coefficient has been developed based on the data obtained in pure steam. The data obtained with noncondensable gas were used to develop a correlation for the renewal time as used in the condensation suppression model developed by Young and Bajorek. This paper describes a new sub-grid liquid jet

  11. Use of fundamental condensation heat transfer experiments for the development of a sub-grid liquid jet condensation model

    Buschman, Francis X.; Aumiller, David L.

    2017-01-01

    Highlights: • Direct contact condensation data on liquid jets up to 1.7 MPa in pure steam and in the presence of noncondensable gas. • Identified a pressure effect on the impact of noncondensables to suppress condensation heat transfer not captured in existing data or correlations. • Pure steam data is used to develop a new correlation for condensation heat transfer on subcooled liquid jets. • Noncondensable data used to develop a modification to the renewal time estimate used in the Young and Bajorek correlation for condensation suppression in the presence of noncondensables. • A jet injection boundary condition, using a sub-grid jet condensation model, is developed for COBRA-IE which provides a more detailed estimate of the condensation rate on the liquid jet and allows the use of jet specific closure relationships. - Abstract: Condensation on liquid jets is an important phenomenon for many different facets of nuclear power plant transients and analyses such as containment spray cooling. An experimental facility constructed at the Pennsylvania State University, the High Pressure Liquid Jet Condensation Heat Transfer facility (HPLJCHT), has been used to perform steady-state condensation heat transfer experiments in which the temperature of the liquid jet is measured at different axial locations allowing the condensation rate to be determined over the jet length. Test data have been obtained in a pure steam environment and with varying concentrations of noncondensable gas. This data extends the available jet condensation data from near atmospheric pressure up to a pressure of 1.7 MPa. An empirical correlation for the liquid side condensation heat transfer coefficient has been developed based on the data obtained in pure steam. The data obtained with noncondensable gas were used to develop a correlation for the renewal time as used in the condensation suppression model developed by Young and Bajorek. This paper describes a new sub-grid liquid jet

  12. Constructive conflict coverage - A social-psychological research and development program

    Wilhelm Kempf

    2003-10-01

    Full Text Available Peace journalism is a relatively new research area in psychology which emerged in the last decade of the last century. Building on findings from social psychology (group processes, social influence, conflict research, attitude change, propaganda, and enemy concept research and on models of conflict management and the constructive transformation of conflicts, an investigation is made of the factors that determine the escalation oriented bias of conventional war reporting, and of how this can be transformed into de-escalation and/or peace oriented conflict reporting. This paper provides an outline of this research and development program in six sections: (1 Interest Perception, (2 Task Formulation, (3 Basic Theoretical Assumptions, (4 War Discourse vs. Peace Discourse, (5 a Two Step Model, and (6 Journalist Training.

  13. Assessment of grid optimisation measures for the German transmission grid using open source grid data

    Böing, F.; Murmann, A.; Pellinger, C.; Bruckmeier, A.; Kern, T.; Mongin, T.

    2018-02-01

    The expansion of capacities in the German transmission grid is a necessity for further integration of renewable energy sources into the electricity sector. In this paper, the grid optimisation measures ‘Overhead Line Monitoring’, ‘Power-to-Heat’ and ‘Demand Response in the Industry’ are evaluated and compared against conventional grid expansion for the year 2030. Initially, the methodical approach of the simulation model is presented and detailed descriptions of the grid model and the used grid data, which partly originates from open-source platforms, are provided. Further, this paper explains how ‘Curtailment’ and ‘Redispatch’ can be reduced by implementing grid optimisation measures and how the depreciation of economic costs can be determined considering construction costs. The developed simulations show that the conventional grid expansion is more efficient and implies more grid relieving effects than the evaluated grid optimisation measures.

  14. Constructive Technology Assessment (CTA) as a tool in coverage with evidence development: the case of the 70-gene prognosis signature for breast cancer diagnostics

    Retel, Valesca; Retèl, Valesca P.; Bueno-de-Mesquita, Jolien M.; Hummel, J. Marjan; van de Vijver, Marc J.; Douma, Kirsten F.L.; Karsenberg, Kim; van Dam, Frits S.A.M.; van Krimpen, Cees; Bellot, Frank E.; Roumen, Rudi M.H.; Linn, Sabine C.; van Harten, Willem H.

    2009-01-01

    Objectives: Constructive Technology Assessment (CTA) is a means to guide early implementation of new developments in society, and can be used as an evaluation tool for Coverage with Evidence Development (CED). We used CTA for the introduction of a new diagnostic test in the Netherlands, the 70-gene

  15. Constructive Technology Assessment (CTA) as a tool in Coverage with Evidence Development: The case of the 70-gene prognosis signature for breast cancer diagnostics

    Retèl, Valesca P.; Bueno-de-Mesquita, Jolien M.; Hummel, Marjan J. M.; van de Vijver, Marc J.; Douma, Kirsten F. L.; Karsenberg, Kim; van Dam, Frits S. A. M.; van Krimpen, Cees; Bellot, Frank E.; Roumen, Rudi M. H.; Linn, Sabine C.; van Harten, Wim H.

    2009-01-01

    Objectives: Constructive Technology Assessment (CTA) is a means to guide early implementation of new developments in society, and can be used as an evaluation tool for Coverage with Evidence Development (CED). We used CTA for the introduction of a new diagnostic test in the Netherlands, the 70-gene

  16. Impacts of offshore grid developments in the North Sea region on market values by 2050: How will offshore wind farms and transmission lines pay?

    Traber, Thure; Koduvere, Hardi; Koivisto, Matti Juhani

    2017-01-01

    on the substantial differences in the expected economic exposure of wind power plants and transmission lines to the development of the electricity grid in the North Sea. Since details of the prospective energy system around the North Sea region shape these revenue expectations, we further develop and apply...... market values of wind farms on hub level due to impacts of different options for grid structures. The results aim to inform the discussion on possibilities for the allocation of grid expansion costs to the different connected countries including Belgium, Denmark, Germany, the Netherlands, Norway......Increasing the integration of renewable energy in Northern and Central Europe markets is greatly influenced by the development of electricity transmission grid infrastructure. On the background of the fast development of offshore wind energy and its connection to the onshore electricity systems...

  17. Research, development and demonstration. Issue paper - working group 3; Denmark. Smart Grid Network; Forskning, udvikling og demonstration. Issue paper, arbejdsgruppe 3

    Balasiu, A [Siemens A/S, Ballerup (Denmark); Troi, A [Danmarks Tekniske Univ. Risoe Nationallaboratoriet for Baeredygtig Energi, Roskilde (Denmark); Andersen, Casper [DI Energibranchen, Copenhagen (Denmark); and others

    2011-07-01

    The Smart Grid Network was established in 2010 by the Danish climate and energy minister tasked with developing recommendations for future actions and initiatives that make it possible to handle up to 50% electricity from wind energy in the power system in 2020. The task of working group 3 was defined as: - An overview of the Danish research and development of smart grids and related areas; - Conducting an analysis of the research and development needs required for the introduction of a smart grid in Denmark. Based on this analysis, provide suggestions for new large research and development projects; - Provide recommendations on how the activities are best carried out taking into account innovation, economic growth and jobs. In the analysis it is explained that Denmark so far has a strong position in several elements of RD and D activities. This position will soon be threatened as several European countries have launched ambitious initiatives to strengthen the national position. The working group recommends that Denmark gives priority to Smart Grids as a national action in order to solve the challenge of technically and economically efficient integration of renewable energy. Smart Grid is a catalyst that strengthens a new green growth industry (cleantech) in Denmark. Research and development has an important role to play in this development. A common vision and roadmap must be established for research institutions, energy companies and industries related to research, development and demonstration of Smart Grid, which can maintain and expand Denmark's global leadership position. As part of this, there is a need to strengthen and market research infrastructures, which can turn Denmark into a global hub for smart grid development. There is a current need to strengthen the advanced technical and scientific research in the complexities of the power system, research on market design, user behavior and smart grid interoperability. (LN)

  18. Research, development and demonstration. Issue paper - working group 3; Denmark. Smart Grid Network; Forskning, udvikling og demonstration. Issue paper, arbejdsgruppe 3

    Balasiu, A. (Siemens A/S, Ballerup (Denmark)); Troi, A. (Danmarks Tekniske Univ.. Risoe Nationallaboratoriet for Baeredygtig Energi, Roskilde (Denmark)); Andersen, Casper (DI Energibranchen, Copenhagen (Denmark)) (and others)

    2011-07-01

    The Smart Grid Network was established in 2010 by the Danish climate and energy minister tasked with developing recommendations for future actions and initiatives that make it possible to handle up to 50% electricity from wind energy in the power system in 2020. The task of working group 3 was defined as: - An overview of the Danish research and development of smart grids and related areas; - Conducting an analysis of the research and development needs required for the introduction of a smart grid in Denmark. Based on this analysis, provide suggestions for new large research and development projects; - Provide recommendations on how the activities are best carried out taking into account innovation, economic growth and jobs. In the analysis it is explained that Denmark so far has a strong position in several elements of RD and D activities. This position will soon be threatened as several European countries have launched ambitious initiatives to strengthen the national position. The working group recommends that Denmark gives priority to Smart Grids as a national action in order to solve the challenge of technically and economically efficient integration of renewable energy. Smart Grid is a catalyst that strengthens a new green growth industry (cleantech) in Denmark. Research and development has an important role to play in this development. A common vision and roadmap must be established for research institutions, energy companies and industries related to research, development and demonstration of Smart Grid, which can maintain and expand Denmark's global leadership position. As part of this, there is a need to strengthen and market research infrastructures, which can turn Denmark into a global hub for smart grid development. There is a current need to strengthen the advanced technical and scientific research in the complexities of the power system, research on market design, user behavior and smart grid interoperability. (LN)

  19. Low-carbon off-grid electrification for rural areas in the United Kingdom: Lessons from the developing world

    Yadoo, Annabel; Gormally, Alexandra; Cruickshank, Heather

    2011-01-01

    Low-carbon off-grid electrification for rural areas is becoming increasingly popular in the United Kingdom. However, many developing countries have been electrifying their rural areas in this way for decades. Case study fieldwork in Nepal and findings from United Kingdom based research will be used to examine how developed nations can learn from the experience of developing countries with regard to the institutional environment and delivery approach adopted in renewable energy off-grid rural electrification. A clearer institutional framework and more direct external assistance during project development are advised. External coordinators should also engage the community in a mobilization process a priori to help alleviate internal conflicts of interest that could later impede a project. - Highlights: → Development of community renewable energy projects in the UK is commended. → The UK can benefit from the experience of successful programmes in Nepal. → A clearer institutional framework and more direct external assistance is required. → External coordinators should engage the community in a mobilization process.

  20. Grid generation methods

    Liseikin, Vladimir D

    2017-01-01

    This new edition provides a description of current developments relating to grid methods, grid codes, and their applications to actual problems. Grid generation methods are indispensable for the numerical solution of differential equations. Adaptive grid-mapping techniques, in particular, are the main focus and represent a promising tool to deal with systems with singularities. This 3rd edition includes three new chapters on numerical implementations (10), control of grid properties (11), and applications to mechanical, fluid, and plasma related problems (13). Also the other chapters have been updated including new topics, such as curvatures of discrete surfaces (3). Concise descriptions of hybrid mesh generation, drag and sweeping methods, parallel algorithms for mesh generation have been included too. This new edition addresses a broad range of readers: students, researchers, and practitioners in applied mathematics, mechanics, engineering, physics and other areas of applications.

  1. A Systematical Framework of Schedule Risk Management for Power Grid Engineering Projects’ Sustainable Development

    Rao Rao

    2014-10-01

    Full Text Available Schedule risks are the main threat for high efficiency of schedule management in power grid engineering projects (PGEP. This paper aims to build a systematical framework for schedule risk management, which consists of three dimensions, including the personnel dimension, method dimension and time dimension, namely supervisory personnel, management methods and the construction process, respectively. Responsibilities of staff with varied functions are discussed in the supervisory personnel part, and six stages and their corresponding 40 key works are ensured as the time dimension. Risk identification, analysis, evaluation and prevention together formed the method dimension. Based on this framework, 222 schedule risks occur in the whole process of PGEPs are identified via questionnaires and expert interviews. Then, the relationship among each risk is figured out based on the Interpretative Structure Model (ISM method and the impact of each risk is quantitatively assessed by establishing evaluation system. The actual practice of the proposed framework is verified through the analysis of the first stage of a PGEP. Finally, the results show that this framework of schedule risk management is meaningful for improving the efficiency of project management. It provides managers with a clearer procedure with which to conduct risk management, helps them to timely detect risks and prevent risks from occurring. It is also easy for managers to judge the influence level of each risk, so they can take actions based on the level of each risk’s severity. Overall, it is beneficial for power grid enterprises to achieve a sustainable management.

  2. Off grid Solar power supply: the real green development; L'alimentation des sites isoles en energie photovoltaique: developper sans polluer

    Dellinger, B.; Mansard, M. [Apex BP Solar, 34 - St Mathieu de Treviers (France)

    2010-04-15

    Solar experience is now 30 years. In spite of the tremendous growth of the developed world grid connect market, quite a number of companies remain seriously involved in the off grid sector. Solar started in the field as the sole solution to give access to energy and water to rural communities. With major actors involved at early stage, a number of reliable technical solutions were developed and implemented. These solutions have gradually drawn the attention of industrial companies investing in emerging countries and needing reliable energy sources. On top of improving standard of living, Off grid solar solutions also create economical opportunity for the local private sector getting involved in maintenance and services around the energy system. As at today, hundreds thousand of sites daily operate on site. However the needs remain extremely high. That is the reasons why off grid solar remains a major tool for sustainable development. (author)

  3. Georeferenced Population Datasets of Mexico (GEO-MEX): Raster Based GIS Coverage of Mexican Population

    National Aeronautics and Space Administration — The Raster Based GIS Coverage of Mexican Population is a gridded coverage (1 x 1 km) of Mexican population. The data were converted from vector into raster. The...

  4. Influencing Factors and Development Trend Analysis of China Electric Grid Investment Demand Based on a Panel Co-Integration Model

    Jinchao Li; Lin Chen; Yuwei Xiang; Jinying Li; Dong Peng

    2018-01-01

    Electric grid investment demand analysis is significant to reasonably arranging construction funds for the electric grid and reduce costs. This paper used the panel data of electric grid investment from 23 provinces of China between 2004 and 2016 as samples to analyze the influence between electric grid investment demand and GDP, population scale, social electricity consumption, installed electrical capacity, and peak load based on co-integration tests. We find that GDP and peak load have pos...

  5. A novel approach using flexible scheduling and aggregation to optimize demand response in the developing interactive grid market architecture

    Reihani, Ehsan; Motalleb, Mahdi; Thornton, Matsu; Ghorbani, Reza

    2016-01-01

    Highlights: • Designing a DR market to increase renewable resources and decrease air pollution. • Explaining two economic models for DR market for selling available DR quantities. • Optimal allocating DR quantity to houses under each DR aggregator control. • Proposing a discomfort cost function for residential DR resources. • Performing a sensitivity analysis on discomfort cost function coefficients. - Abstract: With the increasing presence of intermittent renewable energy generation sources, variable control over loads and energy storage devices on the grid become even more important to maintain this balance. Increasing renewable energy penetration depends on both technical and economic factors. Distribution system consumers can contribute to grid stability by controlling residential electrical device power consumed by water heaters and battery storage systems. Coupled with dynamic supply pricing strategies, a comprehensive system for demand response (DR) exist. Proper DR management will allow greater integration of renewable energy sources partially replacing energy demand currently met by the combustion of fossil-fuels. An enticing economic framework providing increased value to consumers compensates them for reduced control of devices placed under a DR aggregator. Much work has already been done to develop more effective ways to implement DR control systems. Utilizing an integrated approach that combines consumer requirements into aggregate pools, and provides a dynamic response to market and grid conditions, we have developed a mathematical model that can quantify control parameters for optimum demand response and decide which resources to switch and when. In this model, optimization is achieved as a function of cost savings vs. customer comfort using mathematical market analysis. Two market modeling approaches—the Cournot and SFE—are presented and compared. A quadratic function is used for presenting the cost function of each DRA (Demand

  6. Integration of net zero energy building with smart grid to improve regional electrification ratio towards sustainable development

    Latief, Yusuf; Berawi, Mohammed Ali; Supriadi, Leni; Bintang Koesalamwardi, Ario; Petroceany, Jade; Herzanita, Ayu

    2017-12-01

    Indonesia is currently encouraging its physical, social and economy development. Physical development for economic development have to be supported by energy availability. For Indonesia, 90% of electrification ratio is still become an important task that has to be completed by the Government. However, the effort to increase electrification can become an environmental problem if it’s done with BAU scenario. The by-product of electric generation is the GHG, which increasing every year since 2006 from various sectors i.e. industry, housing, commercial, transportation, and energy. Net Zero Energy Building (NZEB) is an energy efficient building which can produce energy independently from clean and renewable sources. The energy that is generated by NZEB can be used for the building itself, and can be exported to the central grid. The integration of NZEB and Smart Grid can solve today’s issue on electrification ratio. Literature study will find benchmarks which can be applied in Indonesia along with possible obstacles in applying this technology.

  7. Fuel rod-grid interaction wear: in-reactor tests (LWBR development program)

    Stackhouse, R.M.

    1979-11-01

    Wear of the Zircaloy cladding of LWBR irradiation test fuel rods, resulting from relative motion between rod and rod support contacts, is reported. Measured wear depths were small, 0.0 to 2.7 mils, but are important in fuel element behavior assessment because of the local loss of cladding thickness, as well as the effect on grid spring forces that laterally restrain the rods. An empirical wear analysis model, based on out-of-pile tests, is presented. The model was used to calculate the wear on the irradiation test fuel rods attributed to a combination of up-and-down motions resulting from power and pressure/temperature cycling of the test reactor, flow-induced vibrations, and assembly handling scratches. The calculated depths are generally deeper than the measured depths

  8. Framing access to medicines in developing countries: an analysis of media coverage of Canada's Access to Medicines Regime.

    Esmail, Laura C; Phillips, Kaye; Kuek, Victoria; Cosio, Andrea Perez; Kohler, Jillian Clare

    2010-01-04

    In September 2003, the Canadian government committed to developing legislation that would facilitate greater access to affordable medicines for developing countries. Over the course of eight months, the legislation, now known as Canada's Access to Medicines Regime (CAMR), went through a controversial policy development process and the newspaper media was one of the major venues in which the policy debates took place. The purpose of this study was to examine how the media framed CAMR to determine how policy goals were conceptualized, which stakeholder interests controlled the public debate and how these variables related to the public policy process. We conducted a qualitative content analysis of newspaper coverage of the CAMR policy and implementation process from 2003-2008. The primary theoretical framework for this study was framing theory. A total of 90 articles from 11 Canadian newspapers were selected for inclusion in our analysis. A team of four researchers coded the articles for themes relating to access to medicines and which stakeholders' voice figured more prominently on each issue. Stakeholders examined included: the research-based industry, the generic industry, civil society, the Canadian government, and developing country representatives. The most frequently mentioned themes across all documents were the issues of drug affordability, intellectual property, trade agreements and obligations, and development. Issues such as human rights, pharmaceutical innovation, and economic competitiveness got little media representation. Civil society dominated the media contents, followed far behind by the Canadian government, the research-based and generic pharmaceutical industries. Developing country representatives were hardly represented in the media. Media framing obscured the discussion of some of the underlying policy goals in this case and failed to highlight issues which are now significant barriers to the use of the legislation. Using the media to engage

  9. CEOS Ocean Variables Enabling Research and Applications for Geo (COVERAGE)

    Tsontos, V. M.; Vazquez, J.; Zlotnicki, V.

    2017-12-01

    The CEOS Ocean Variables Enabling Research and Applications for GEO (COVERAGE) initiative seeks to facilitate joint utilization of different satellite data streams on ocean physics, better integrated with biological and in situ observations, including near real-time data streams in support of oceanographic and decision support applications for societal benefit. COVERAGE aligns with programmatic objectives of CEOS (the Committee on Earth Observation Satellites) and the missions of GEO-MBON (Marine Biodiversity Observation Network) and GEO-Blue Planet, which are to advance and exploit synergies among the many observational programs devoted to ocean and coastal waters. COVERAGE is conceived of as 3 year pilot project involving international collaboration. It focuses on implementing technologies, including cloud based solutions, to provide a data rich, web-based platform for integrated ocean data delivery and access: multi-parameter observations, easily discoverable and usable, organized by disciplines, available in near real-time, collocated to a common grid and including climatologies. These will be complemented by a set of value-added data services available via the COVERAGE portal including an advanced Web-based visualization interface, subsetting/extraction, data collocation/matchup and other relevant on demand processing capabilities. COVERAGE development will be organized around priority use cases and applications identified by GEO and agency partners. The initial phase will be to develop co-located 25km products from the four Ocean Virtual Constellations (VCs), Sea Surface Temperature, Sea Level, Ocean Color, and Sea Surface Winds. This aims to stimulate work among the ocean VCs while developing products and system functionality based on community recommendations. Such products as anomalies from a time mean, would build on the theme of applications with a relevance to CEOS/GEO mission and vision. Here we provide an overview of the COVERAGE initiative with an

  10. Experience of the Canary Islands in the development of insular 100% RES systems and micro-grids

    Piernavieja, Gonzalo; Suarez, Salvador; Henriquez, Daniel [Instituto Tecnologico de Canarias (Canary Islands Institute of Technology - ITC), Las Palmas, Gran Canaria (Spain). RandD Div.

    2010-07-01

    Given the mentioned circumstances, conventional energy planning in the Canary Islands is a very complex task. The Regional Energy Plan PECAN (2007-2015) tries to correct the existing critical situation setting, among others, the ambitious goal of >25% electricity from RES (mostly wind) for 2015. In parallel to this conventional energy planning, outstanding initiatives in the distributed generation field are underway. ITC vision is that the Canarian Archipelago, given its particular characteristics (insular systems of different sizes, abundant RES potential -different sources-, important natural and biodiversity heritage, etc.), are a laboratory for testing and demonstrating new energy technologies in real conditions, as well as their commercial implementation. These new technologies include energy storage (particularly for excess RES that cannot be absorbed by the grids), development of 100% energy self- sufficiency models (with exclusive use of RES) and micro-/minigrids with high RES penetration and RES forecasting, including advanced ICTs and sustainable mobility concepts (e.g. V2G technologies). Given the high conventional generation costs and the relatively low RES costs (wind electricity production cost is less than 0.03 Euro/kWh), the Canary Islands could in the short term achieve grid parity, and in this sense pioneer the change to a RES based energy system. Models tested on the islands could be exported or extrapolated to our islands, regions of developing countries and even other regions in continental Europe. (orig.)

  11. Development of Gridded Ensemble Precipitation and Temperature Datasets for the Contiguous United States Plus Hawai'i and Alaska

    Newman, A. J.; Clark, M. P.; Nijssen, B.; Wood, A.; Gutmann, E. D.; Mizukami, N.; Longman, R. J.; Giambelluca, T. W.; Cherry, J.; Nowak, K.; Arnold, J.; Prein, A. F.

    2016-12-01

    Gridded precipitation and temperature products are inherently uncertain due to myriad factors. These include interpolation from a sparse observation network, measurement representativeness, and measurement errors. Despite this inherent uncertainty, uncertainty is typically not included, or is a specific addition to each dataset without much general applicability across different datasets. A lack of quantitative uncertainty estimates for hydrometeorological forcing fields limits their utility to support land surface and hydrologic modeling techniques such as data assimilation, probabilistic forecasting and verification. To address this gap, we have developed a first of its kind gridded, observation-based ensemble of precipitation and temperature at a daily increment for the period 1980-2012 over the United States (including Alaska and Hawaii). A longer, higher resolution version (1970-present, 1/16th degree) has also been implemented to support real-time hydrologic- monitoring and prediction in several regional US domains. We will present the development and evaluation of the dataset, along with initial applications of the dataset for ensemble data assimilation and probabilistic evaluation of high resolution regional climate model simulations. We will also present results on the new high resolution products for Alaska and Hawaii (2 km and 250 m respectively), to complete the first ensemble observation based product suite for the entire 50 states. Finally, we will present plans to improve the ensemble dataset, focusing on efforts to improve the methods used for station interpolation and ensemble generation, as well as methods to fuse station data with numerical weather prediction model output.

  12. Desktop grid computing

    Cerin, Christophe

    2012-01-01

    Desktop Grid Computing presents common techniques used in numerous models, algorithms, and tools developed during the last decade to implement desktop grid computing. These techniques enable the solution of many important sub-problems for middleware design, including scheduling, data management, security, load balancing, result certification, and fault tolerance. The book's first part covers the initial ideas and basic concepts of desktop grid computing. The second part explores challenging current and future problems. Each chapter presents the sub-problems, discusses theoretical and practical

  13. Grid Computing

    A computing grid interconnects resources such as high performancecomputers, scientific databases, and computercontrolledscientific instruments of cooperating organizationseach of which is autonomous. It precedes and is quitedifferent from cloud computing, which provides computingresources by vendors to customers ...

  14. Grid Computing

    IAS Admin

    emergence of supercomputers led to the use of computer simula- tion as an .... Scientific and engineering applications (e.g., Tera grid secure gate way). Collaborative ... Encryption, privacy, protection from malicious software. Physical Layer.

  15. Technology Roadmaps: Smart Grids

    NONE

    2011-07-01

    The development of Technology Roadmaps: Smart Grids -- which the IEA defines as an electricity network that uses digital and other advanced technologies to monitor and manage the transport of electricity from all generation sources to meet the varying electricity demands of end users -- is essential if the global community is to achieve shared goals for energy security, economic development and climate change mitigation. Unfortunately, existing misunderstandings of exactly what smart grids are and the physical and institutional complexity of electricity systems make it difficult to implement smart grids on the scale that is needed. This roadmap sets out specific steps needed over the coming years to achieve milestones that will allow smart grids to deliver a clean energy future.

  16. Smart grids - French Expertise

    2015-11-01

    The adaptation of electrical systems is the focus of major work worldwide. Bringing electricity to new territories, modernizing existing electricity grids, implementing energy efficiency policies and deploying renewable energies, developing new uses for electricity, introducing electric vehicles - these are the challenges facing a multitude of regions and countries. Smart Grids are the result of the convergence of electrical systems technologies with information and communications technologies. They play a key role in addressing the above challenges. Smart Grid development is a major priority for both public and private-sector actors in France. The experience of French companies has grown with the current French electricity system, a system that already shows extensive levels of 'intelligence', efficiency and competitiveness. French expertise also leverages substantial competence in terms of 'systems engineering', and can provide a tailored response to meet all sorts of needs. French products and services span all the technical and commercial building blocks that make up the Smart Grid value chain. They address the following issues: Improving the use and valuation of renewable energies and decentralized means of production, by optimizing the balance between generation and consumption. Strengthening the intelligence of the transmission and distribution grids: developing 'Supergrid', digitizing substations in transmission networks, and automating the distribution grids are the focus of a great many projects designed to reinforce the 'self-healing' capacity of the grid. Improving the valuation of decentralized flexibilities: this involves, among others, deploying smart meters, reinforcing active energy efficiency measures, and boosting consumers' contribution to grid balancing, via practices such as demand response which implies the aggregation of flexibility among residential, business, and/or industrial sites. Addressing current technological challenges, in

  17. Design and development of 500 m long HTS cable system in the KEPCO power grid, Korea

    Sohn, S. H.; Lim, J. H.; Yang, B. M.; Lee, S. K.; Jang, H. M.; Kim, Y. H.; Yang, H. S.; Kim, D. L.; Kim, H. R.; Yim, S. W.; Won, Y. J.; Hwang, S. D.

    2010-11-01

    In Korea, two long-term field demonstrations for high temperature superconducting (HTS) cable have been carried out for several years; Korea Electric Power Corporation (KEPCO) and LS Cable Ltd. (LSC) independently. Encouraged at the result of the projects performed in parallel, a new project targeting the real grid operation was launched in the fourth quarter of 2008 with the Korean government's financial support. KEPCO and LSC are jointly collaborating in the selection of substation, determination of cable specification, design of cryogenic system, and the scheme of protection coordination. A three phase 500 m long HTS cable at a distribution level voltage of 22.9 kV is to be built at 154/22.9 kV Icheon substation located in near Seoul. A hybrid cryogenic system reflecting the contingency plan is being designed including cryocoolers. The HTS cable system will be installed in the second quarter of 2010, being commissioned by the fall of 2010. This paper describes the objectives of the project and design issues of the cable and cryogenic system in detail.

  18. Trends in Cultural Journalism : The development of film coverage in cross-national perspective, 1955-2005

    A. Kersten (Annemarie); M.S.S.E. Janssen (Susanne)

    2016-01-01

    markdownabstractVarious studies report that cultural journalism increasingly focuses on service and entertainment instead of serious arts coverage. The press prioritizes popular culture over traditional high arts to growing extent. However, this shift in journalistic attention doesn’t necessarily

  19. Computational support of the laminar flow supersonic wind tunnel, CNSFV code development, Maglev, and grid generation

    Klopfer, Goetz H.

    1995-01-01

    This final report covers the work done on corporate agreement NCC2-616 over a period of 5 1/2 years. It is broken into three segments of approximately 1 1/2 to 2 years each. The report is a summary report and is not intended to be comprehensive of all the work done under this corporate agreement. A more complete coverage of the work done is obtained from the papers and reports listed in the 'Papers' section. Additional reporting of significant work was done through 'Technical Highlights' and 'Research and Technical Summaries'. A listing of copies are given in the 'Technical Highlights and R and T' section. The work was also reported in a series of seminars, conference meetings, branch reviews, workshops, and project reviews. A list of these talks is given in the 'Presentation' section. Also during this time three students ranging from high school to graduate level were supervised. A list of the students and the type of work accomplished is given in the 'Mentoring' section. The report concludes with the 'Appendices' sections which include the three papers produced during the last 1 1/2 years of this corporate agreement.

  20. Current Grid operation and future role of the Grid

    Smirnova, O.

    2012-12-01

    Grid-like technologies and approaches became an integral part of HEP experiments. Some other scientific communities also use similar technologies for data-intensive computations. The distinct feature of Grid computing is the ability to federate heterogeneous resources of different ownership into a seamless infrastructure, accessible via a single log-on. Like other infrastructures of similar nature, Grid functioning requires not only technologically sound basis, but also reliable operation procedures, monitoring and accounting. The two aspects, technological and operational, are closely related: weaker is the technology, more burden is on operations, and other way around. As of today, Grid technologies are still evolving: at CERN alone, every LHC experiment uses an own Grid-like system. This inevitably creates a heavy load on operations. Infrastructure maintenance, monitoring and incident response are done on several levels, from local system administrators to large international organisations, involving massive human effort worldwide. The necessity to commit substantial resources is one of the obstacles faced by smaller research communities when moving computing to the Grid. Moreover, most current Grid solutions were developed under significant influence of HEP use cases, and thus need additional effort to adapt them to other applications. Reluctance of many non-HEP researchers to use Grid negatively affects the outlook for national Grid organisations, which strive to provide multi-science services. We started from the situation where Grid organisations were fused with HEP laboratories and national HEP research programmes; we hope to move towards the world where Grid will ultimately reach the status of generic public computing and storage service provider and permanent national and international Grid infrastructures will be established. How far will we be able to advance along this path, depends on us. If no standardisation and convergence efforts will take place

  1. Current Grid operation and future role of the Grid

    Smirnova, O

    2012-01-01

    Grid-like technologies and approaches became an integral part of HEP experiments. Some other scientific communities also use similar technologies for data-intensive computations. The distinct feature of Grid computing is the ability to federate heterogeneous resources of different ownership into a seamless infrastructure, accessible via a single log-on. Like other infrastructures of similar nature, Grid functioning requires not only technologically sound basis, but also reliable operation procedures, monitoring and accounting. The two aspects, technological and operational, are closely related: weaker is the technology, more burden is on operations, and other way around. As of today, Grid technologies are still evolving: at CERN alone, every LHC experiment uses an own Grid-like system. This inevitably creates a heavy load on operations. Infrastructure maintenance, monitoring and incident response are done on several levels, from local system administrators to large international organisations, involving massive human effort worldwide. The necessity to commit substantial resources is one of the obstacles faced by smaller research communities when moving computing to the Grid. Moreover, most current Grid solutions were developed under significant influence of HEP use cases, and thus need additional effort to adapt them to other applications. Reluctance of many non-HEP researchers to use Grid negatively affects the outlook for national Grid organisations, which strive to provide multi-science services. We started from the situation where Grid organisations were fused with HEP laboratories and national HEP research programmes; we hope to move towards the world where Grid will ultimately reach the status of generic public computing and storage service provider and permanent national and international Grid infrastructures will be established. How far will we be able to advance along this path, depends on us. If no standardisation and convergence efforts will take place

  2. Medicare Coverage Database

    U.S. Department of Health & Human Services — The Medicare Coverage Database (MCD) contains all National Coverage Determinations (NCDs) and Local Coverage Determinations (LCDs), local articles, and proposed NCD...

  3. The open science grid

    Pordes, R.

    2004-01-01

    The U.S. LHC Tier-1 and Tier-2 laboratories and universities are developing production Grids to support LHC applications running across a worldwide Grid computing system. Together with partners in computer science, physics grid projects and active experiments, we will build a common national production grid infrastructure which is open in its architecture, implementation and use. The Open Science Grid (OSG) model builds upon the successful approach of last year's joint Grid2003 project. The Grid3 shared infrastructure has for over eight months provided significant computational resources and throughput to a range of applications, including ATLAS and CMS data challenges, SDSS, LIGO, and biology analyses, and computer science demonstrators and experiments. To move towards LHC-scale data management, access and analysis capabilities, we must increase the scale, services, and sustainability of the current infrastructure by an order of magnitude or more. Thus, we must achieve a significant upgrade in its functionalities and technologies. The initial OSG partners will build upon a fully usable, sustainable and robust grid. Initial partners include the US LHC collaborations, DOE and NSF Laboratories and Universities and Trillium Grid projects. The approach is to federate with other application communities in the U.S. to build a shared infrastructure open to other sciences and capable of being modified and improved to respond to needs of other applications, including CDF, D0, BaBar, and RHIC experiments. We describe the application-driven, engineered services of the OSG, short term plans and status, and the roadmap for a consortium, its partnerships and national focus

  4. GENIUS: a web portal for the grid

    Andronico, A.; Barbera, R.; Falzone, A.; Lo Re, G.; Pulvirenti, A.; Rodolico, A.

    2003-01-01

    The architecture and the current implementation of the grid portal GENIUS (Grid Enabled web environment for site Independent User job Submission), jointly developed by INFN and NICE within the context of the INFN Grid and DataGrid Project, is presented and discussed

  5. Grid-Optimization Program for Photovoltaic Cells

    Daniel, R. E.; Lee, T. S.

    1986-01-01

    CELLOPT program developed to assist in designing grid pattern of current-conducting material on photovoltaic cell. Analyzes parasitic resistance losses and shadow loss associated with metallized grid pattern on both round and rectangular solar cells. Though performs sensitivity studies, used primarily to optimize grid design in terms of bus bar and grid lines by minimizing power loss. CELLOPT written in APL.

  6. Preliminary identification of potential markets for off-grid electrification: tool development and a case study of Ghana

    Descoqs, Benoit; Bhattacharyya, Subhes

    2018-02-01

    With more than one billion people lacking access to electricity in the world, ensuring universal access to electricity by 2030 remains a major challenge which cannot be left to the government initiatives alone. Access to local information and identification of potential areas for investment can be a challenge for investors. This paper provides a tool for preliminary assessment of potential markets for off-grid electrification in developing countries and applies this to Ghana to demonstrate its applicability. A multi-criteria approach is used to rank the districts according to the overall potential and the best markets and least favourable areas for investment are identified. The tool offers flexibility to include new inputs to the analysis and the factor weights can be adjusted as appropriate. The case study shows that the tool can effectively identify potential areas from a list of candidates and offers support to analysts.

  7. Model Development for Power System Analysis with a Substantial Wind Energy Capacity Installed in the Nordic grid

    Carlson, Ola; Perdana, Abram; Chen, Peiyuan

    2011-01-01

    The worldwide development of wind power installations now includes planning and construction of large-scale wind farms ranging in magnitudes of 1000 MW and more. As part of the planning and design of such systems, it is well established that the transient and dynamic stability of the electrical...... power system needs to be studied. Modelling work of the electrical behaviour of wind turbines and wind farms as well as model validation by measurements have been important parts of this project work. The models have been used to study dynamic phenomena during normal operation and fault occasions...... in the electric system. Fault Ride Through (FRT) measurements have been carried out on new wind parks connected to Estonian power grid and in all of them FRT tests were made. In several wind parks the tests were not successful and the tests will be repeated. In Finland measurements have carried out in 6 MW...

  8. Using the Repertory Grid Technique to Examine Trainee Clinical Psychologists' Construal of Their Personal and Professional Development.

    Hill, Katy; Wittkowski, Anja; Hodgkinson, Emma; Bell, Richard; Hare, Dougal J

    2016-09-01

    The repertory grid technique was used to explore how 26 third-year trainee clinical psychologists construed their personal and professional selves over the course of training and into the future. Each trainee completed a demographic questionnaire and a repertory grid with 10 elements: four 'personal self' elements, four 'professional self' elements and two 'qualified clinical psychologist' elements. They then rated the 10 elements on 10 bipolar constructs of their choosing. Trainees' personal and professional selves were construed to be similar to each other. Trainees had low self-esteem and reported currently feeling anxious, stressed, unsettled and lacking an appropriate work-life balance. These difficulties were attributed to the demands of training and were expected to resolve once training was completed with future selves being construed as similar to ideal selves. Suggestions for future research with improved methodology are made, and the implications of the findings for trainees, training providers and employers of newly qualified clinical psychologists are given. The overall implication being that stress in training is normative and the profession has a duty to normalize this and ensure that self-care and personal development are recognized as core competencies of the clinical psychologist for the benefit of its members and their clients. Copyright © 2015 John Wiley & Sons, Ltd. Clinical psychology trainees experience training as demanding and stressful, which negatively impacts on their personal and professional self-image and self-esteem. However, they are optimistic that they will become more like their ideal self in the future. Stress in clinical training (and beyond) is normative, and thus, personal development and self-care should be recognized as clinical psychologist's core competencies. Copyright © 2015 John Wiley & Sons, Ltd.

  9. On the uncertainties associated with using gridded rainfall data as a proxy for observed

    C. R. Tozer

    2012-05-01

    Full Text Available Gridded rainfall datasets are used in many hydrological and climatological studies, in Australia and elsewhere, including for hydroclimatic forecasting, climate attribution studies and climate model performance assessments. The attraction of the spatial coverage provided by gridded data is clear, particularly in Australia where the spatial and temporal resolution of the rainfall gauge network is sparse. However, the question that must be asked is whether it is suitable to use gridded data as a proxy for observed point data, given that gridded data is inherently "smoothed" and may not necessarily capture the temporal and spatial variability of Australian rainfall which leads to hydroclimatic extremes (i.e. droughts, floods. This study investigates this question through a statistical analysis of three monthly gridded Australian rainfall datasets – the Bureau of Meteorology (BOM dataset, the Australian Water Availability Project (AWAP and the SILO dataset. The results of the monthly, seasonal and annual comparisons show that not only are the three gridded datasets different relative to each other, there are also marked differences between the gridded rainfall data and the rainfall observed at gauges within the corresponding grids – particularly for extremely wet or extremely dry conditions. Also important is that the differences observed appear to be non-systematic. To demonstrate the hydrological implications of using gridded data as a proxy for gauged data, a rainfall-runoff model is applied to one catchment in South Australia initially using gauged data as the source of rainfall input and then gridded rainfall data. The results indicate a markedly different runoff response associated with each of the different sources of rainfall data. It should be noted that this study does not seek to identify which gridded dataset is the "best" for Australia, as each gridded data source has its pros and cons, as does gauged data. Rather, the intention is

  10. Superconductors in the power grid materials and applications

    2015-01-01

    Superconductors offer high throughput with low electric losses and have the potential to transform the electric power grid. Transmission networks incorporating cables of this type could, for example, deliver more power and enable substantial energy savings. Superconductors in the Power Grid: Materials and Applications provides an overview of superconductors and their applications in power grids. Sections address the design and engineering of cable systems and fault current limiters and other emerging applications for superconductors in the power grid, as well as case studies of industrial applications of superconductors in the power grid. Expert editor from highly respected US government-funded research centre Unique focus on superconductors in the power grid Comprehensive coverage

  11. Comparative Analysis of Hydraulic Fracturing Wastewater Practices in Unconventional Shale Development: Newspaper Coverage of Stakeholder Concerns and Social License to Operate

    Joel Gehman; Dara Y. Thompson; Daniel S. Alessi; Diana M. Allen; Greg G. Goss

    2016-01-01

    In this article we review prior literature regarding the concept of social license to operate, and related concepts, including corporate social responsibility, sustainable development, stakeholder management and cumulative effects. Informed by these concepts, we search for newspaper articles published in North American provinces and states where the Barnett, Duvernay, Marcellus and Montney shale plays are located. Using these data, we tabulate coverage of stakeholder concerns related to hydra...

  12. The development of a sub-daily gridded rainfall product to improve hydrological predictions in Great Britain

    Quinn, Niall; Freer, Jim; Coxon, Gemma; O'Loughlin, Fiachra; Woods, Ross; Liguori, Sara

    2015-04-01

    In Great Britain and many other regions of the world, flooding resulting from short duration, high intensity rainfall events can lead to significant economic losses and fatalities. At present, such extreme events are often poorly evaluated using hydrological models due, in part, to their rarity and relatively short duration and a lack of appropriate data. Such storm characteristics are not well represented by daily rainfall records currently available using volumetric gauges and/or derived gridded products. This research aims to address this important data gap by developing a sub-daily gridded precipitation product for Great Britain. Our focus is to better understand these storm events and some of the challenges and uncertainties in quantifying such data across catchment scales. Our goal is to both improve such rainfall characterisation and derive an input to drive hydrological model simulations. Our methodology involves the collation, error checking, and spatial interpolation of approximately 2000 rain gauges located across Great Britain, provided by the Scottish Environment Protection Agency (SEPA) and the Environment Agency (EA). Error checking was conducted over the entirety of the TBR data available, utilising a two stage approach. First, rain gauge data at each site were examined independently, with data exceeding reasonable thresholds marked as suspect. Second, potentially erroneous data were marked using a neighbourhood analysis approach whereby measurements at a given gauge were deemed suspect if they did not fall within defined bounds of measurements at neighbouring gauges. A total of eight error checks were conducted. To provide the user with the greatest flexibility possible, the error markers associated with each check have been recorded at every site. This approach aims to enable the user to choose which checks they deem most suitable for a particular application. The quality assured TBR dataset was then spatially interpolated to produce a national

  13. Developing a Philippine Cancer Grid. Part 1: Building a Prototype for a Data Retrieval System for Breast Cancer Research Using Medical Ontologies

    Coronel, Andrei D.; Saldana, Rafael P.

    Cancer is a leading cause of morbidity and mortality in the Philippines. Developed within the context of a Philippine Cancer Grid, the present study used web development technologies such as PHP, MySQL, and Apache server to build a prototype data retrieval system for breast cancer research that incorporates medical ontologies from the Unified Medical Language System (UMLS).

  14. Smart Grid Integration Laboratory

    Troxell, Wade [Colorado State Univ., Fort Collins, CO (United States)

    2011-12-22

    The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSU's overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratory's focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3

  15. Smart homes in transition - Investigating the role of households in the development of smart grids in Denmark

    Nyborg, Sophie

    and black-outs, fuel security, fraud and inaccurate billing. The present PhD project aims to explore the role households play in a sustainable transition of the energy system and takes as its point of departure the Danish smart grid case. Here the smart grid is dominantly framed in relation to the political...

  16. Multi-scale modeling of urban air pollution: development of a Street-in-Grid model

    Kim, Youngseob; Wu, You; Seigneur, Christian; Roustan, Yelva

    2016-04-01

    the Leighton cycle chemistry. The street-network model is coupled to the CTM Polair3D of the Polyphemus air quality modeling platform to constitute a Street-in-Grid (SinG) model. The street-network model is used to simulate the concentrations of the chemical species in the lowest layer in the urban area and the simulation for the upper layers is then performed by Polair3D. Interactions between the street-network model and the host CTM occur at roof-top and depend on the vertical mass transfer described above. The SinG model is used to simulate the concentrations of gas-phase pollutants (O3 and NOx) in a Paris suburb. The emission data for each street that are needed for the street-network model were obtained from a dynamic traffic model. Topographic data, such as street length/width and building height, were obtained from a geographic database (BD TOPO). Simulated concentrations are compared to concentrations measured at two monitoring stations that were located on each side of a large avenue.

  17. caGrid 1.0: a Grid enterprise architecture for cancer research.

    Oster, Scott; Langella, Stephen; Hastings, Shannon; Ervin, David; Madduri, Ravi; Kurc, Tahsin; Siebenlist, Frank; Covitz, Peter; Shanbhag, Krishnakant; Foster, Ian; Saltz, Joel

    2007-10-11

    caGrid is the core Grid architecture of the NCI-sponsored cancer Biomedical Informatics Grid (caBIG) program. The current release, caGrid version 1.0, is developed as the production Grid software infrastructure of caBIG. Based on feedback from adopters of the previous version (caGrid 0.5), it has been significantly enhanced with new features and improvements to existing components. This paper presents an overview of caGrid 1.0, its main components, and enhancements over caGrid 0.5.

  18. Research and development of grid computing technology in center for computational science and e-systems of Japan Atomic Energy Agency

    Suzuki, Yoshio

    2007-01-01

    Center for Computational Science and E-systems of the Japan Atomic Energy Agency (CCSE/JAEA) has carried out R and D of grid computing technology. Since 1995, R and D to realize computational assistance for researchers called Seamless Thinking Aid (STA) and then to share intellectual resources called Information Technology Based Laboratory (ITBL) have been conducted, leading to construct an intelligent infrastructure for the atomic energy research called Atomic Energy Grid InfraStructure (AEGIS) under the Japanese national project 'Development and Applications of Advanced High-Performance Supercomputer'. It aims to enable synchronization of three themes: 1) Computer-Aided Research and Development (CARD) to realize and environment for STA, 2) Computer-Aided Engineering (CAEN) to establish Multi Experimental Tools (MEXT), and 3) Computer Aided Science (CASC) to promote the Atomic Energy Research and Investigation (AERI). This article reviewed achievements in R and D of grid computing technology so far obtained. (T. Tanaka)

  19. Preliminary design and manufacturing feasibility study for a machined Zircaloy triangular pitch fuel rod support system (grids) (AWBA development program)

    Horwood, W.A.

    1981-07-01

    General design features and manufacturing operations for a high precision machined Zircaloy fuel rod support grid intended for use in advanced light water prebreeder or breeder reactor designs are described. The grid system consists of a Zircaloy main body with fuel rod and guide tube cells machined using wire EDM, a separate AM-350 stainless steel insert spring which fits into a full length T-slot in each fuel rod cell, and a thin (0.025'' or 0.040'' thick) wire EDM machined Zircaloy coverplate laser welded to each side of the grid body to retain the insert springs. The fuel rods are placed in a triangular pitch array with a tight rod-to-rod spacing of 0.063 inch nominal. Two dimples are positioned at the mid-thickness of the grid (single level) with a 90 0 included angle. Data is provided on the effectiveness of the manufacturing operations chosen for grid machining and assembly

  20. The Practices of Existential Psychotherapists: Development and Application of an Observational Grid

    Correia, Edgar A.; Sartóris, Vítor; Fernandes, Tiago; Cooper, Mick; Berdondini, Lucia; Sousa, Daniel; Pires, Branca Sá; da Fonseca, João

    2018-01-01

    Within the major therapeutic paradigms, observational instruments have been developed to assess orientation-specific interventions or processes. However, to date, no such instrument exists to assess existential practices. Recent research indicates the key practices of existential therapists, and forms an empirical basis on which to develop an…

  1. RE Data Explorer: Informing Variable Renewable Energy Grid Integration for Low Emission Development

    Cox, Sarah L [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-11-08

    The RE Data Explorer, developed by the National Renewable Energy Laboratory, is an innovative web-based analysis tool that utilizes geospatial and spatiotemporal renewable energy data to visualize, execute, and support analysis of renewable energy potential under various user-defined scenarios. This analysis can inform high-level prospecting, integrated planning, and policy making to enable low emission development.

  2. [Quantification of acetabular coverage in normal adult].

    Lin, R M; Yang, C Y; Yu, C Y; Yang, C R; Chang, G L; Chou, Y L

    1991-03-01

    Quantification of acetabular coverage is important and can be expressed by superimposition of cartilage tracings on the maximum cross-sectional area of the femoral head. A practical Autolisp program on PC AutoCAD has been developed by us to quantify the acetabular coverage through numerical expression of the images of computed tomography. Thirty adults (60 hips) with normal center-edge angle and acetabular index in plain X ray were randomly selected for serial drops. These slices were prepared with a fixed coordination and in continuous sections of 5 mm in thickness. The contours of the cartilage of each section were digitized into a PC computer and processed by AutoCAD programs to quantify and characterize the acetabular coverage of normal and dysplastic adult hips. We found that a total coverage ratio of greater than 80%, an anterior coverage ratio of greater than 75% and a posterior coverage ratio of greater than 80% can be categorized in a normal group. Polar edge distance is a good indicator for the evaluation of preoperative and postoperative coverage conditions. For standardization and evaluation of acetabular coverage, the most suitable parameters are the total coverage ratio, anterior coverage ratio, posterior coverage ratio and polar edge distance. However, medial coverage and lateral coverage ratios are indispensable in cases of dysplastic hip because variations between them are so great that acetabuloplasty may be impossible. This program can also be used to classify precisely the type of dysplastic hip.

  3. Measles Vaccination Supports Millennium Development Goal 4: Increasing Coverage and Increasing Child Survival in Northern Ghana, 1996–2012

    Paul Welaga

    2018-02-01

    Full Text Available BackgroundMeasles vaccine (MV administered as the last vaccine after the third dose of diphtheria-tetanus-pertussis (DTP may be associated with better child survival unrelated to prevention of measles infection. Other studies have shown that MV administered after DTP was more beneficial and was associated with lower mortality compared with DTP administered after MV or DTP administered simultaneously with MV. We compared the difference in mortality between measles vaccinated after DTP3 and measles-unvaccinated children in Navrongo, Ghana.MethodsThis was a follow-up study involving annual cohort of children aged 9–23 months from 1996 to 2012. We assessed survival in relation to the measles vaccination status within the first 12 months from interview date and until 5 years of age using Cox proportional hazards models.ResultsIn all, 38,333 children were included in the study. The proportion of children vaccinated with MV-after-DTP3 increased from 45% in 1996 to 95% in 2012. The adjusted hazard ratio (HR for measles unvaccinated compared with MV-after-DTP3 vaccinated children was 1.38 (1.15–1.66 in the first 12 months after assessment of vaccination status and 1.22 (1.05–1.41 with follow-up to 5 years of age. The national immunization days campaigns with oral polio vaccine or MV might have reduced the effect of being MV-after-DTP3 vaccinated vs MV-unvaccinated. For 12 months of follow-up, the HR before a campaign for MV-unvaccinated children was 1.63 (1.23–2.17 compared to those who received MV-after-DTP3. After the campaign, the HR reduced to 1.23 (0.97–1.54. Stratifying the analysis by sex, measles-unvaccinated boys had a HR of 1.69 (1.33–2.61 compared to measles-unvaccinated girls who had a HR 1.06 (0.79–1.40 during 1-year follow-up. In 1989, only 7% of children in the area had received MV-after-DTP3; the increase in MV-after-DTP3 coverage from 1989 to 2012 may have lowered mortality rate among children aged 9 months to

  4. For smart electric grids

    Tran Thiet, Jean-Paul; Leger, Sebastien; Bressand, Florian; Perez, Yannick; Bacha, Seddik; Laurent, Daniel; Perrin, Marion

    2012-01-01

    The authors identify and discuss the main challenges faced by the French electric grid: the management of electricity demand and the needed improvement of energy efficiency, the evolution of consumer's state of mind, and the integration of new production capacities. They notably outline that France have been living until recently with an electricity abundance, but now faces the highest consumption peaks in Europe, and is therefore facing higher risks of power cuts. They also notice that the French energy mix is slowly evolving, and outline the problems raised by the fact that renewable energies which are to be developed, are decentralised and intermittent. They propose an overview of present developments of smart grids, and outline their innovative characteristics, challenges raised by their development and compare international examples. They show that smart grids enable a better adapted supply and decentralisation. A set of proposals is formulated about how to finance and to organise the reconfiguration of electric grids, how to increase consumer's responsibility for peak management and demand management, how to create the conditions of emergence of a European market of smart grids, and how to support self-consumption and the building-up of an energy storage sector

  5. Development of Grid-like Applications for Public Health Using Web 2.0 Mashup Techniques

    Scotch, Matthew; Yip, Kevin Y.; Cheung, Kei-Hoi

    2008-01-01

    Development of public health informatics applications often requires the integration of multiple data sources. This process can be challenging due to issues such as different file formats, schemas, naming systems, and having to scrape the content of web pages. A potential solution to these system development challenges is the use of Web 2.0 technologies. In general, Web 2.0 technologies are new internet services that encourage and value information sharing and collaboration among individuals....

  6. Distributed Resource Energy Analysis and Management System (DREAMS) Development for Real-time Grid Operations

    Nakafuji, Dora [Hawaiian Electric Company, Honululu, HI (United States); Gouveia, Lauren [Hawaiian Electric Company, Honululu, HI (United States)

    2016-10-24

    This project supports development of the next generation, integrated energy management infrastructure (EMS) able to incorporate advance visualization of behind-the-meter distributed resource information and probabilistic renewable energy generation forecasts to inform real-time operational decisions. The project involves end-users and active feedback from an Utility Advisory Team (UAT) to help inform how information can be used to enhance operational functions (e.g. unit commitment, load forecasting, Automatic Generation Control (AGC) reserve monitoring, ramp alerts) within two major EMS platforms. Objectives include: Engaging utility operations personnel to develop user input on displays, set expectations, test and review; Developing ease of use and timeliness metrics for measuring enhancements; Developing prototype integrated capabilities within two operational EMS environments; Demonstrating an integrated decision analysis platform with real-time wind and solar forecasting information and timely distributed resource information; Seamlessly integrating new 4-dimensional information into operations without increasing workload and complexities; Developing sufficient analytics to inform and confidently transform and adopt new operating practices and procedures; Disseminating project lessons learned through industry sponsored workshops and conferences;Building on collaborative utility-vendor partnership and industry capabilities

  7. Scenario calculations for the 2012 grid development plan. Overdimensioned HVDC transmission lines; Szenarienrechnungen zum Netzentwicklungsplan (NEP) 2012. HGUe-Leitungen ueberdimensioniert

    Oei, Pao-Yu; Sander, Aram; Hankel, Lisa; Laurisch, Lilian; Lorenz, Casimir [Technische Univ. Berlin (Germany); Schroeder, Andreas [Deutsches Institut fuer Wirtschaftsforschung, Berlin (Germany)

    2012-09-15

    The grid development plan presented in June 2012 by the German Federal Network Agency envisages a large number of new AC and DC transmission lines for Germany. The purpose of these transmission lines is to facilitate the point-to-point transport of electricity produced from renewable resources to load centres. The authors present a model-assisted analysis of the impact of these transmission lines on the structure of electricity production. They also investigate to what extent an increase in storage capacity and the steering of demand can serve as alternatives to grid expansion.

  8. Development of 3D CFD code based on structured non-orthogonal grids

    Vaidya, Abhijeet Mohan; Maheshwari, Naresh Kumar; Rama Rao, A.

    2016-01-01

    Most of the nuclear industry problems involve complex geometries. Solution of flow and heat transfer over complex geometries is a very important requirement for designing new reactor systems. Hence development of a general purpose three dimensional (3D) CFD code is undertaken. For handling complex shape of computational domain, implementation on structured non-orthogonal coordinates is being done. The code is validated by comparing its results for 3D inclined lid driven cavity at different inclination angles and Reynolds numbers with OpenFOAM results. This paper contains formulation and validation of the new code developed. (author)

  9. Off-grid photovoltaic systems for the development of sub-Saharan Africa

    De Paoli, Giovanni; Stefanoni, Marco

    2015-01-01

    In the coming decades we will see a remarkable demographic and economic development of Africa. The ongoing climate change requires that this development is centered on the use of large-scale renewable energy. ENEA experience in Senegal shows that the hybrid PV systems are already competitive and can therefore allow, in the next decade, access to electricity to hundreds of millions of Africans. Italy, through the re launch of international cooperation, should favor the entry of domestic companies in this huge market and thus contribute effectively to overcoming poverty and combating climate change [it

  10. Research and development of a low cost expandable grid-linked inverter system: PG2000

    Lakin, R.A.

    2000-07-01

    The overall aim of the project was to research and develop an inverter for use in the conversion of solar energy into mains electricity, which is low-cost in volume manufacture and flexible in terms of expendability to meet different power level needs. (author)

  11. Grid pulser

    Jansweijer, P.P.M.; Es, J.T. van.

    1990-01-01

    This report describes a fast pulse generator. This generator delivers a high-voltage pulse of at most 6000 V with a rise time being smaller than 50 nS. this results in a slew rate of more than 120.000 volts per μS. The pulse generator is used to control the grid of the injector of the electron accelerator MEA. The capacity of this grid is about 60 pF. In order to charge this capacity up to 6000 volts in 50 nS a current of 8 ampere is needed. The maximal pulse length is 50 μS with a repeat frequency of 500 Hz. During this 50 μS the stability of the pulse amplitude is better than 0.1%. (author). 20 figs

  12. Development of a module for taking remuneration under the Renewable Energy Law into account in a model for calculating the economic efficiency of smart electricity grids

    Ludwig, Maximilian Uwe; Toprani, Vipul; Witte, Frank

    2014-01-01

    The enactment of the Law Giving Priority to Renewable Energies (EEG) in 2000 laid the cornerstone for the transformation of the German electricity supply. Since then the proportion of renewable energy in electricity production has grown dramatically, confronting the German network infrastructure, which was initially designed for a centralised supply system, with new problems and challenges. In order to achieve optimal coordination between volatile energy infeeds, electricity storage plants and consumers it is necessary to bring all components involved together in a smart grid. A small-scale grid of this description is currently being operated and investigated on the EUREF Campus in Berlin Schoeneberg. The task of achieving optimal allocation of energy flows and getting the micro smart grid to run accordingly, i.e. at a profit, poses new challenges to all involved. To be able to determine the economic efficiency of smart grids a calculation model was developed which simulates the operation of production and storage plants and takes the behaviour of real consumers into account. The model rates the profitability of investments made in terms of their capital value. In its current version the model still disregards the legal regulations for the remuneration of electricity produced from a mix of renewable resources. These cannot be considered as physically separate in a smart grid. In the present study a module based on EEG provisions was developed which calculates remuneration rates as a function of production and demand at a given moment. This is one of several factors which influence the economic efficiency of smart grids. The study undertakes to identify these factors and describe their influence on the profitability of the total investment.

  13. The grid

    Morrad, Annie; McArthur, Ian

    2018-01-01

    Project Anywhere Project title: The Grid   Artists: Annie Morrad: Artist/Senior Lecturer, University of Lincoln, School of Film and Media, Lincoln, UK   Dr Ian McArthur: Hybrid Practitioner/Senior Lecturer, UNSW Art & Design, UNSW Australia, Sydney, Australia   Annie Morrad is a London-based artist and musician and senior lecturer at the University of Lincoln, UK. Dr Ian McArthur is a Sydney-based hybrid practitione...

  14. Vehicle to Grid Communication Standards Development, Testing and Validation - Status Report

    Gowri, Krishnan; Pratt, Richard M.; Tuffner, Francis K.; Kintner-Meyer, Michael CW

    2011-09-01

    In the US, more than 10,000 electric vehicles (EV) have been delivered to consumers during the first three quarters of 2011. A large majority of these vehicles are battery electric, often requiring 220 volt charging. Though the vehicle manufacturers and charging station manufacturers have provided consumers options for charging preferences, there are no existing communications between consumers and the utilities to manage the charging demand. There is also wide variation between manufacturers in their approach to support vehicle charging. There are in-vehicle networks, charging station networks, utility networks each using either cellular, Wi-Fi, ZigBee or other proprietary communication technology with no standards currently available for interoperability. The current situation of ad-hoc solutions is a major barrier to the wide adoption of electric vehicles. SAE, the International Standards Organization/International Electrotechnical Commission (ISO/IEC), ANSI, National Institute of Standards and Technology (NIST) and several industrial organizations are working towards the development of interoperability standards. PNNL has participated in the development and testing of these standards in an effort to accelerate the adoption and development of communication modules.

  15. Clean development mechanism and off-grid small-scale hydropower projects: Evaluation of additionality

    Tanwar, Nitin

    2007-01-01

    The global climate change mitigation policies and their stress on sustainable development have made electrification of rural mountainous villages, using small hydro, an attractive destination for potential clean development mechanism (CDM) projects. This invariably involves judging the additionality of such projects. The paper suggests a new approach to judge the additionality of such stand-alone small hydropower projects. This has been done by breaking up additionality into two components: external and local. The external additionality is project developer dependent. For determining the local additionality, the paper takes into account the probability of a village getting electrified over a period of time, which is kept equal to the possible crediting period. This is done by defining an electrification factor (EF) whose value depends on the degree of isolation, financial constraints and institutional constraints encountered while electrifying a mountainous village. Using this EF, the additionality of a CDM project can be judged in a much easier and accurate way. The paper is based on the data and inputs gathered during site visits to many isolated villages located in the eastern Indian Himalayas

  16. Development of Flexible Active Power Control Strategies for Grid-Connected Photovoltaic Inverters by Modifying MPPT Algorithms

    Sangwongwanich, Ariya; Yang, Yongheng; Blaabjerg, Frede

    2017-01-01

    As the penetration level of grid-connected PV systems increases, more advanced control functionality is demanded. In order to ensure smooth and friendly grid integration as well as enable more PV installations, the power generated by PV systems needs to be flexible and capable of: 1) limiting...... strategies for grid-connected PV inverters by modifying maximum power point tracking algorithms, where the PV power is regulated by changing the operating point of the PV system. In this way, no extra equipment is needed, being a cost-effective solution. Experiments on a 3-kW grid-connected PV system have...... the maximum feed-in power, 2) ensuring a smooth change rate, and 3) providing a power reserve. Besides, such flexible power control functionalities have to be achieved in a cost-effective way in order to ensure the competitiveness of solar energy. Therefore, this paper explores flexible active power control...

  17. Development of accurate standardized algorithms for conversion between SRP grid coordinates and latitude/longitude

    Looney, B.B.; Marsh, J.T. Jr.; Hayes, D.W.

    1987-01-01

    The Savannah Rive Plant (SRP) is a nuclear production facility operated by E.I. du Pont de Nemours and Co. for the United States Department of Energy. SRP is located along the Savannah River in South Carolina. Construction of SRP began in the early 1950's. At the time the plant was built, a local coordinate system was developed to assist in defining the locations of plant facilities. Over the years, large quantities of data have been developed using ''SRP Coordinates.'' These data include: building locations, plant boundaries, environmental sampling locations, waste disposal area locations, and a wide range of other geographical information. Currently, staff persons at SRP are organizing these data into automated information systems to allow more rapid, more robust and higher quality interpretation, interchange and presentation of spatial data. A key element in this process is the ability to incorporate outside data bases into the systems, as well as to share SRP data with interested organizations outside as SRP. Most geographical information outside of SRP is organized using latitude and longitude. Thus, straightforward, accurate and consistent algorithms to convert SRP Coordinates to/from latitude and longitude are needed. Appropriate algorithms are presented in this document

  18. Commercialization and business development of grid-connected PV at SMUD

    Osborn, D.E.

    1998-01-01

    SMUD has completed its first 5 year, 6 MW PV commercialization effort based on the sustained, orderly development of the utility PV market. SMUD has begun a 5 year, 10 MW program designed to complete a process that will result in PV being at a market competitive price by 2002 and as a sustainable business opportunity for SMUD. As part of this effort, by the end of 1997, SMUD had installed over 450 PV systems totaling 6 MW. These included over 420 residential rooftop systems as well as commercial buildings, parking lots and substation systems. Under its new Business Plan, SMUD has signed contracts for an additional 10 MW of PV systems for 1998 through 2002 with cost decreasing to less than $3/W. As part of its new competitive business strategy responding to changes the utility industry is undergoing, SMUD has incorporated PV as a key business opportunity. SMUD has established partnerships with its customers through the PV Pioneer green pricing program, with DOE and UPVG through TEAM-UP and Million Solar Roofs to advance PV commercialization and to develop rooftops as PV power plant sites and with other utilities through its PV Partnership program

  19. Research and development of basic technologies for the next generation industries, 'ultra-grid elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'chokoshi soshi'. Kenkyu kaihatsu hyoka

    NONE

    1991-04-01

    Research, development and evaluation were performed with an objective of establishing the basic technology related to ultra-grid elements. With regard to the process technology to search materials suitable for the targets of ultra-grid elements and manufacture ultra-grid element structure, a technology has been completed, by which crystalline growth is performed while controlling AlAs and GaAs at atom layer levels by using the MBE process and MOCVD process. This has allowed the understanding to be progressed on behavior of electrons in hetero interface or very thin films. It has also become possible to acquire new crystals that have band gaps and grid constants matching the performance of the elements. Regarding ultra-grid functional elements, new functional elements with the HET and RHET structures were made by utilizing the characteristics of the ultra grids, and performances of normal temperature operation and high speed operation were investigated. The ultra-grid structured elements have made it possible to embed ultra fine electrode structure into crystals by means of double hetero growth, and a possibility of Si-based PBT was demonstrated. These achievements lead to a belief that the targets intended at the beginning of the present research have been achieved. (NEDO)

  20. Research and development of basic technologies for the next generation industries, 'ultra-grid elements'. Evaluation on the research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'chokoshi soshi'. Kenkyu kaihatsu hyoka

    NONE

    1991-04-01

    Research, development and evaluation were performed with an objective of establishing the basic technology related to ultra-grid elements. With regard to the process technology to search materials suitable for the targets of ultra-grid elements and manufacture ultra-grid element structure, a technology has been completed, by which crystalline growth is performed while controlling AlAs and GaAs at atom layer levels by using the MBE process and MOCVD process. This has allowed the understanding to be progressed on behavior of electrons in hetero interface or very thin films. It has also become possible to acquire new crystals that have band gaps and grid constants matching the performance of the elements. Regarding ultra-grid functional elements, new functional elements with the HET and RHET structures were made by utilizing the characteristics of the ultra grids, and performances of normal temperature operation and high speed operation were investigated. The ultra-grid structured elements have made it possible to embed ultra fine electrode structure into crystals by means of double hetero growth, and a possibility of Si-based PBT was demonstrated. These achievements lead to a belief that the targets intended at the beginning of the present research have been achieved. (NEDO)

  1. Grid interoperability: joining grid information systems

    Flechl, M; Field, L

    2008-01-01

    A grid is defined as being 'coordinated resource sharing and problem solving in dynamic, multi-institutional virtual organizations'. Over recent years a number of grid projects, many of which have a strong regional presence, have emerged to help coordinate institutions and enable grids. Today, we face a situation where a number of grid projects exist, most of which are using slightly different middleware. Grid interoperation is trying to bridge these differences and enable Virtual Organizations to access resources at the institutions independent of their grid project affiliation. Grid interoperation is usually a bilateral activity between two grid infrastructures. Recently within the Open Grid Forum, the Grid Interoperability Now (GIN) Community Group is trying to build upon these bilateral activities. The GIN group is a focal point where all the infrastructures can come together to share ideas and experiences on grid interoperation. It is hoped that each bilateral activity will bring us one step closer to the overall goal of a uniform grid landscape. A fundamental aspect of a grid is the information system, which is used to find available grid services. As different grids use different information systems, interoperation between these systems is crucial for grid interoperability. This paper describes the work carried out to overcome these differences between a number of grid projects and the experiences gained. It focuses on the different techniques used and highlights the important areas for future standardization

  2. The role of insurance in the achievement of universal coverage within a developing country context: South Africa as a case study.

    van den Heever, Alex M

    2012-01-01

    Achieving universal coverage as an objective needs to confront the reality of multiple mechanisms, with healthcare financing and provision occurring in both public and private settings. South Africa has both large and mature public and private health systems offering useful insights into how they can be effectively harmonized to optimise coverage. Private healthcare in South Africa has also gone through many phases and regulatory regimes which, through careful review, can help identify potential policy frameworks that can optimise their ability to deepen coverage in a manner that complements the basic coverage of public arrangements. Using South Africa as a case study, this review examines whether private health systems are susceptible to regulation and therefore able to support an extension and deepening of coverage when complementing a pre-existing publicly funded and delivered health system? The approach involves a review of different stages in the development of the South African private health system and its response to policy changes. The focus is on the time-bound characteristics of the health system and associated policy responses and opportunities. A distinction is consequently made between the early, largely unregulated, phases of development and more mature phases with alternative regulatory regimes. The private health system in South Africa has played an important supplementary role in achieving universal coverage throughout its history, but more especially in the post-Apartheid period. However, the quality of this role has been erratic, influenced predominantly by policy vacillation.The private system expanded rapidly during the 1980s mainly due to the pre-existence of a mature health insurance system and a weakening public hospital system which could accommodate and facilitate an increased demand for private hospital services. This growth served to expand commercial interest in health insurance, in the form of regulated medical schemes, which until

  3. Grid technologies and applications: architecture and achievements

    Ian Foster

    2001-01-01

    The 18 months since CHEP'2000 have seen significant advances in Grid computing, both within and outside high energy physics. While in early 2000, Grid computing was a novel concept that most CHEP attendees were being exposed to for the first time, now considerable consensus is seen on Grid architecture, a solid and widely adopted technology base, major funding initiatives, a wide variety of projects developing applications and technologies, and major deployment projects aimed at creating robust Grid infrastructures. The author provides a summary of major developments and trends, focusing on the Globus open source Grid software project and the GriPhyN data grid project

  4. Techno-economic assessment of an off-grid PV system for developing regions to provide electricity for basic domestic needs: A 2020–2040 scenario

    Zubi, Ghassan; Dufo-López, Rodolfo; Pasaoglu, Guzay; Pardo, Nicolás

    2016-01-01

    Highlights: • Off-grid PV has a huge potential to provide effective solutions for energy poverty. • Its implementation barrier is economic, but paths to effectively tackle this exist. • The implementation barriers will be reduced by a favourable technological evolution. • Cost reductions to the level of grid-connected power will be eventually achieved. - Abstract: While in the developed countries electrification is paving the way for progress and prosperity, nowadays electricity is still not accessible for about 18% of the world’s population. Lack of power grids is the main reason that prevents millions in remote areas in developing countries from using electricity for the daily basic needs. PV systems provide an effective solution for these regions, but affordability remains an issue. This barrier can be widely overcome on the short term by limiting PV power supply to very high added value applications and by properly exploiting innovations, especially in energy efficiency and cost reductions. Additional to that, the long-term perspectives of off-grid PV are very favourable based on its ongoing technological improvements and cost reductions. This paper studies four off-grid PV cases of which each could cover a combination of basic energy needs regarding light, cooking, food conservation and electronic appliances. Case I considers a system that supplies power for LED lamps and electronic devices. Accordingly, Case II adds a fridge and Case III an electric rice cooker to Case I, while Case IV adds both. The paper elaborates on available technologies and future developments regarding all components in order to assess the long term evolution and potential of these applications, most specifically how their affordability would evolve over time. The modelling and optimization of the four cases are performed using the software iHOGA, which is an efficient tool to provide the lowest cost solution for off-grid PV systems. The use of iHOGA for the four cases and

  5. Methodology development for estimating support behavior of spacer grid spring in core

    Yoon, Kyung Ho; Kang, Heung Seok; Kim, Hyung Kyu; Song, Kee Nam

    1998-04-01

    The fuel rod (FR) support behavior is changed during operation resulting from effects such as clad creep-down, spring force relaxation due to irradiation, and irradiation growth of spacer straps in accordance with time or increase of burnup. The FR support behavior is closely associated with time or increase of burnup. The FR support behavior is closely associated with FR damage due to fretting, therefore the analysis on the FR support behavior is normally required to minimize the damage. The characteristics of the parameters, which affect the FR support behavior, and the methodology developed for estimating the FR support behavior in the reactor core are described in this work. The FR support condition for the KOFA (KOrean Fuel Assembly) fuel has been analyzed by this method, and the results of the analysis show that the fuel failure due to the fuel rod fretting wear is closely related to the support behavior of FR in the core. Therefore, the present methodology for estimating the FR support condition seems to be useful for estimating the actual FR support condition. In addition, the optimization seems to be a reliable tool for establishing the optimal support condition on the basis of these results. (author). 15 refs., 3 tabs., 26 figs

  6. A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

    Samoylenko, Vladislav O.; Pazderin, Andrew V.

    2017-06-01

    An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

  7. Optimal electricity development by increasing solar resources in diesel-based micro grid of island society in Thailand

    Prachuab Peerapong

    2017-11-01

    Full Text Available Isolated grid diesel-based systems have been a basic electricity system in islands in developing countries. Nevertheless, the increasing diesel price and the higher cost of diesel transport to a long distance to the remote islands make the diesel-based systems unsustainable. This study analyzes the viability to increase solar photovoltaic (PV resources in the existing diesel-based systems. The hybrid PV/diesel system is not only reducing the cost of electricity generation but also decreasing the harmful emissions from fossil fuels. This study uses net present cost (NPC to evaluate the optimum PV/diesel system configurations for installation in isolated island in Thailand. The results of analyses show that the optimal case PV/diesel system can decrease COE from $0.429/kWh to $0.374/kWh when compared to the existing diesel-based system and can decrease emissions both carbon dioxide of 796.61 tons/yr and other gases of 21.47 tons/yr. The hybrid PV/diesel system also reduces diesel fuel consumption of 302,510 liters per year as a result from an optimal of 41% PV resource shares in this system.

  8. Grids, Clouds and Virtualization

    Cafaro, Massimo

    2011-01-01

    Research into grid computing has been driven by the need to solve large-scale, increasingly complex problems for scientific applications. Yet the applications of grid computing for business and casual users did not begin to emerge until the development of the concept of cloud computing, fueled by advances in virtualization techniques, coupled with the increased availability of ever-greater Internet bandwidth. The appeal of this new paradigm is mainly based on its simplicity, and the affordable price for seamless access to both computational and storage resources. This timely text/reference int

  9. Smart Grid Architectures

    Dondossola, Giovanna; Terruggia, Roberta; Bessler, Sandford

    2014-01-01

    The scope of this paper is to address the evolution of distribution grid architectures following the widespread introduction of renewable energy sources. The increasing connection of distributed resources has a strong impact on the topology and the control functionality of the current distribution...... grids requiring the development of new Information and Communication Technology (ICT) solutions with various degrees of adaptation of the monitoring, communication and control technologies. The costs of ICT based solutions need however to be taken into account, hence it is desirable to work...

  10. Distributed photovoltaic grid transformers

    Shertukde, Hemchandra Madhusudan

    2014-01-01

    The demand for alternative energy sources fuels the need for electric power and controls engineers to possess a practical understanding of transformers suitable for solar energy. Meeting that need, Distributed Photovoltaic Grid Transformers begins by explaining the basic theory behind transformers in the solar power arena, and then progresses to describe the development, manufacture, and sale of distributed photovoltaic (PV) grid transformers, which help boost the electric DC voltage (generally at 30 volts) harnessed by a PV panel to a higher level (generally at 115 volts or higher) once it is

  11. The smart grid research network

    Troi, Anders; Jørgensen, Bo Nørregaard; Larsen, Emil Mahler

    2013-01-01

    Grid Network’s recommendations’, which relate to strengthening and marketing the research infrastructure that will position Denmark as the global hub for Smart Grid development; strengthening basic research into the complex relationships in electric systems with large quantities of independent parties...

  12. Evolutions of the power grid: vector of sustainable development; Evolutions du reseau de transport d'electricite: vecteur du developpement durable

    Croguennoc, Alain; Dalle, Bernard; Archambault, R.; Bony, P.E.; Bouneau, C.; Bourguignon, B.; Bouvier, D.; Beltran, A.; Chauvancy, A.; Chevassus-au-Louis, B.; Citi, S.; Claverie, B.; Colomb, B.; Dallet, M.; Deveaux, L.; Dubus, D.; Fresnedo, S.; Herreros, J.; Herz, O.; Isoard, J.; Jaussaud, E.; Laffaye, H.; Laroche, J.P.; Lasserre, D.; Lebas, N.; Lebranchu, D.; Leclerc, F.; Lemoine, D.; Leydier, C.; Malique, F.; Mazoyer, F.; Meudic, M.A.; Nguefeu, S.; Pajot, S.; Pilate, J.M.; Real, G.; Rosso, F.; Waeraas de Saint Martin, G.; Schwartzmann, S.; Serres, E.

    2011-09-01

    The abatement of energy consumption and the mass production of renewable energy are the main actions implemented to meet the climate challenge. In this context, the share of electric power in the final consumption is continuously growing up. Adapting the power transportation grid is necessary if we want to take up the challenge of the new paradigm 'new power generation sites, fatal and intermittent energy'. If this grid is the symbol of a modern and well-equipped France, it is also the revealer of our society antagonisms: change without disruption, progress without sacrifice of heritage and natural landscapes. Industries and grid operators will have to show some innovation and anticipation if they want this deep change to be a success. The French power grid has permitted the regional development in the past and will allow to take up the climate challenge in the future. Its inevitable position in the success of past transformations makes it an essential vector of sustainable development. (J.S.)

  13. Steering the Smart Grid

    Molderink, Albert; Bakker, Vincent; Bosman, M.G.C.; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2010-01-01

    Increasing energy prices and the greenhouse effect lead to more awareness of energy efficiency of electricity supply. During the last years, a lot of technologies and optimization methodologies were developed to increase the efficiency, maintain the grid stability and support large scale

  14. Women's Health Insurance Coverage

    ... Women's Health Policy Women’s Health Insurance Coverage Women’s Health Insurance Coverage Published: Oct 31, 2017 Facebook Twitter LinkedIn ... that many women continue to face. Sources of Health Insurance Coverage Employer-Sponsored Insurance: Approximately 57.9 million ...

  15. Satin: A high-level and efficient grid programming model

    van Nieuwpoort, R.V.; Wrzesinska, G.; Jacobs, C.J.H.; Bal, H.E.

    2010-01-01

    Computational grids have an enormous potential to provide compute power. However, this power remains largely unexploited today for most applications, except trivially parallel programs. Developing parallel grid applications simply is too difficult. Grids introduce several problems not encountered

  16. Communication and Networking in Smart Grids

    Xiao, Yang

    2012-01-01

    Appropriate for researchers, practitioners, and students alike, Communication and Networking in Smart Grids presents state-of-the-art approaches and novel technologies for communication networks in smart grids. It explains how contemporary grid networks are developed and deployed and presents a collection of cutting-edge advances to help improve current practice. Prominent researchers working on smart grids and in related fields around the world explain the fundamental aspects and applications of smart grids. Describing the role that communication and networking will play in future smart grids

  17. Development of device for grid spring fatigue and a cell-based fuel rod fretting wear tests

    Kim, Hyung Kyu; Yoon, Kyung Ho; Kang, Heung Seok; Song, Kee Nam

    2001-05-01

    As an activity of experimental research on the cause and the remedy of LWR fuel fretting failure, developed is test equipment for fatigue of grid spring and cell-based fuel rod fretting wear test. The equipment enables to perform the fretting wear test in the case of gap existence between spring and cladding, which has not been possible by the previously developed one (KAERI/TR-1570/2000). It can also provide fatigue test capability with the frequency of more than 10 Hz. Used are a servo-motor, an eccentric cylinder and lever mechanism for driving system as was similarly used for the previous equipment. In fretting wear test, up to 2 span-length of a fuel cladding tube can be accommodated. For fatigue test, on the other hand, a device for clamping the spring fixture is installed additionally. As a feature of the present equipment, the gap or the contacting force between a spring and a tube can be adjusted during the fretting wear test, while an initial spring force can be simulated for the fatigue test. Tests will be conducted in air at room temperature. In this report, every part of the equipment is explained with photographs, which will provide an easy understanding. Test procedure such as specimen installation, sequence of operation and program handling is also given. As a performance test of the present equipment, displacement range is measured when the hinge of the lever locates at its maximum and minimum positions. This will be used as basic information when additional eccentric cylinder is necessary for different displacement ranges

  18. Smart grid: hope or hype?

    Lunde, Morten; Røpke, Inge; Heiskanen, Eva

    2016-01-01

    how their (intentional or unintentional) choices serve to create or maintain certain boundaries in smart grid development: for example, an exclusive focus on electricity within the broader context of a sustainable energy system. As serious investment starts being made in the smart grid, concepts like......The smart grid is an important but ambiguous element in the future transition of the European energy system. The current paper unpacks one influential national vision of the smart grid to identify what kinds of expectations guide the work of smart grid innovators and how the boundaries of the smart...... research and development and to attract new players into the field. A scenario process such as that demonstrated in this article can serve to articulate some of these implicit assumptions and help actors to navigate the ongoing transition. On the basis of our analysis, European policy makers might consider...

  19. Regional planning and plan approval procedures for development and modification of HV grids; Raumordnungs- und Planfeststellungsverfahren fuer den Aus- und Umbau der Hochspannungsnetze

    Hennig, Jan; Luehmann, Tobias [Sozietaet Gleiss Lutz, Berlin (Germany)

    2012-07-01

    If renewable energy sources are to be integrated, HV grids in Germany must be expanded and upgraded massively. Plans for new ultrahigh voltage lines find a legal basis in the grid expansion acceleration act (NABEG) of 2011 while most of the plans for 110 kV HV lines are still based on the conventional regional planning procedures with public participation followed by a plan approval procedure. With the decentralisation of power supply, these distribution grids are rapidly developing into power collecting grids, which makes high demands in terms of adaptation and upgrading. The contribution presents the legal boundary conditions and practical challenges accompanying the planning of HV lines outside the scope of the NABEG. It outlines the limited options for priorisation of test points in the regional planning and subsequent plan approval procedures and shows how friction between these may be reduced. Buried cables as an alternative to overhead cables are given particular attention as these have come into focus with the energy turnaround legislation of 2011.

  20. A GRID solution for gravitational waves signal analysis from coalescing binaries: performances of test algorithms and further developments

    Acernese, A; Barone, F; Rosa, R De; Esposito, R; Frasca, S; Mastroserio, P; Milano, L; Palomba, C; Pardi, S; Qipiani, K; Ricci, F; Russo, G

    2004-01-01

    The analysis of data coming from interferometric antennas for gravitational wave detection requires a huge amount of computing power. The usual approach to the detection strategy is to set up computer farms able to perform several tasks in parallel, exchanging data through network links. In this paper a new computation strategy based on the GRID environment, is presented. The GRID environment allows several geographically distributed computing resources to exchange data and programs in a secure way, using standard infrastructures. The computing resources can be geographically distributed also on a large scale. Some preliminary tests were performed using a subnetwork of the GRID infrastructure, producing good results in terms of distribution efficiency and time duration

  1. Power systems signal processing for smart grids

    Ribeiro, P.F.; Duque, C.A.; Da Silveira, P.M.; Cerqueira, A.S.

    2013-01-01

    With special relation to smart grids, this book provides clear and comprehensive explanation of how Digital Signal Processing (DSP) and Computational Intelligence (CI) techniques can be applied to solve problems in the power system. Its unique coverage bridges the gap between DSP, electrical power

  2. TIGER: Turbomachinery interactive grid generation

    Soni, Bharat K.; Shih, Ming-Hsin; Janus, J. Mark

    1992-01-01

    A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

  3. The Grid2003 Production Grid Principles and Practice

    Foster, I; Gose, S; Maltsev, N; May, E; Rodríguez, A; Sulakhe, D; Vaniachine, A; Shank, J; Youssef, S; Adams, D; Baker, R; Deng, W; Smith, J; Yu, D; Legrand, I; Singh, S; Steenberg, C; Xia, Y; Afaq, A; Berman, E; Annis, J; Bauerdick, L A T; Ernst, M; Fisk, I; Giacchetti, L; Graham, G; Heavey, A; Kaiser, J; Kuropatkin, N; Pordes, R; Sekhri, V; Weigand, J; Wu, Y; Baker, K; Sorrillo, L; Huth, J; Allen, M; Grundhoefer, L; Hicks, J; Luehring, F C; Peck, S; Quick, R; Simms, S; Fekete, G; Van den Berg, J; Cho, K; Kwon, K; Son, D; Park, H; Canon, S; Jackson, K; Konerding, D E; Lee, J; Olson, D; Sakrejda, I; Tierney, B; Green, M; Miller, R; Letts, J; Martin, T; Bury, D; Dumitrescu, C; Engh, D; Gardner, R; Mambelli, M; Smirnov, Y; Voeckler, J; Wilde, M; Zhao, Y; Zhao, X; Avery, P; Cavanaugh, R J; Kim, B; Prescott, C; Rodríguez, J; Zahn, A; McKee, S; Jordan, C; Prewett, J; Thomas, T; Severini, H; Clifford, B; Deelman, E; Flon, L; Kesselman, C; Mehta, G; Olomu, N; Vahi, K; De, K; McGuigan, P; Sosebee, M; Bradley, D; Couvares, P; De Smet, A; Kireyev, C; Paulson, E; Roy, A; Koranda, S; Moe, B; Brown, B; Sheldon, P

    2004-01-01

    The Grid2003 Project has deployed a multi-virtual organization, application-driven grid laboratory ("GridS") that has sustained for several months the production-level services required by physics experiments of the Large Hadron Collider at CERN (ATLAS and CMS), the Sloan Digital Sky Survey project, the gravitational wave search experiment LIGO, the BTeV experiment at Fermilab, as well as applications in molecular structure analysis and genome analysis, and computer science research projects in such areas as job and data scheduling. The deployed infrastructure has been operating since November 2003 with 27 sites, a peak of 2800 processors, work loads from 10 different applications exceeding 1300 simultaneous jobs, and data transfers among sites of greater than 2 TB/day. We describe the principles that have guided the development of this unique infrastructure and the practical experiences that have resulted from its creation and use. We discuss application requirements for grid services deployment and configur...

  4. gCube Grid services

    Andrade, Pedro

    2008-01-01

    gCube is a service-based framework for eScience applications requiring collaboratory, on-demand, and intensive information processing. It provides to these communities Virtual Research Environments (VREs) to support their activities. gCube is build on top of standard technologies for computational Grids, namely the gLite middleware. The software was produced by the DILIGENT project and will continue to be supported and further developed by the D4Science project. gCube reflects within its name a three-sided interpretation of the Grid vision of resource sharing: sharing of computational resources, sharing of structured data, and sharing of application services. As such, gCube embodies the defining characteristics of computational Grids, data Grids, and virtual data Grids. Precisely, it builds on gLite middleware for managing distributed computations and unstructured data, includes dedicated services for managing data and metadata, provides services for distributed information retrieval, allows the orchestration...

  5. Control of grid integrated voltage source converters under unbalanced conditions: development of an on-line frequency-adaptive virtual flux-based approach

    Suul, Jon Are

    2012-03-15

    Three-Phase Voltage Source Converters (VSCs) are finding widespread applications in grid integrated power conversion systems. The control systems of such VSCs are in an increasing number of these applications required to operate during voltage disturbances and unbalanced conditions. Control systems designed for grid side voltagesensor-less operation are at the same time becoming attractive due to the continuous drive for cost reduction and increased reliability of VSCs, but are not commonly applied for operation during unbalanced conditions. Methods for voltage-sensor-less grid synchronization and control of VSCs under unbalanced grid voltage conditions will therefore be the main focus of this Thesis. Estimation methods based on the concept of Virtual Flux, considering the integral of the converter voltage in analogy to the flux of an electric machine, are among the simplest and most well known techniques for achieving voltage-sensor-less grid synchronization. Most of the established techniques for Virtual Flux estimation are, however, either sensitive to grid frequency variations or they are not easily adaptable for operation under unbalanced grid voltage conditions. This Thesis addresses both these issues by proposing a simple approach for Virtual Flux estimation by utilizing a frequency-adaptive filter based on a Second Order Generalized Integrator (SOGI). The proposed approach can be used to achieve on-line frequency-adaptive varieties of conventional strategies for Virtual Flux estimation. The main advantage is, however, that the SOGI-based Virtual Flux estimation can be arranged in a structure that achieves inherent symmetrical component sequence separation under unbalanced conditions. The proposed method for Virtual Flux estimation can be used as a general basis for voltage-sensor-less grid synchronization and control during unbalanced conditions. In this Thesis, the estimated Virtual Flux signals are used to develop a flexible strategy for control of active

  6. Comparative Analysis of Hydraulic Fracturing Wastewater Practices in Unconventional Shale Development: Newspaper Coverage of Stakeholder Concerns and Social License to Operate

    Joel Gehman

    2016-09-01

    Full Text Available In this article we review prior literature regarding the concept of social license to operate, and related concepts, including corporate social responsibility, sustainable development, stakeholder management and cumulative effects. Informed by these concepts, we search for newspaper articles published in North American provinces and states where the Barnett, Duvernay, Marcellus and Montney shale plays are located. Using these data, we tabulate coverage of stakeholder concerns related to hydraulic fracturing and wastewater practices, and compare the extent to which these concerns vary over place and time. Our vocabulary analyses identify differences in the types and quantities of newspaper coverage devoted to concerns regarding hydraulic fracturing activities in general and wastewater practices in particular. We interpret these differences as suggesting that obtaining a social license to operate is likely not a one size fits all proposition. By understanding which stakeholder concerns are most salient in particular places and times, oil and gas operators and regulators can better tailor their strategies and policies to address local concerns. In other words, the findings from this study indicate that conventional understandings of risk as a technical or economic problem may not be adequate for dealing with unconventional resource challenges such as hydraulic fracturing. Operators and regulators may also need to manage social and cultural risks.

  7. THE DEVELOPMENT OF A 1990 GLOBAL INVENTORY FOR SO(X) AND NO(X) ON A 1(DEGREE) X 1(DEGREE) LATITUDE-LONGITUDE GRID

    VAN HEYST, B.J.

    1999-01-01

    Sulfur and nitrogen oxides emitted to the atmosphere have been linked to the acidification of water bodies and soils and perturbations in the earth's radiation balance. In order to model the global transport and transformation of SO(sub x) and NO(sub x), detailed spatial and temporal emission inventories are required. Benkovitz et al. (1996) published the development of an inventory of 1985 global emissions of SO(sub x) and NO(sub x) from anthropogenic sources. The inventory was gridded to a 1(degree) x 1(degree) latitude-longitude grid and has served as input to several global modeling studies. There is now a need to provide modelers with an update of this inventory to a more recent year, with a split of the emissions into elevated and low level sources. This paper describes the development of a 1990 update of the SO(sub x) and NO(sub x) global inventories that also includes a breakdown of sources into 17 sector groups. The inventory development starts with a gridded global default EDGAR inventory (Olivier et al, 1996). In countries where more detailed national inventories are available, these are used to replace the emissions for those countries in the global default. The gridded emissions are distributed into two height levels (0-100m and and gt;100m) based on the final plume heights that are estimated to be typical for the various sectors considered. The sources of data as well as some of the methodologies employed to compile and develop the 1990 global inventory for SO(sub x) and NO(sub x) are discussed. The results reported should be considered to be interim since the work is still in progress and additional data sets are expected to become available

  8. Grid attacks avian flu

    2006-01-01

    During April, a collaboration of Asian and European laboratories analysed 300,000 possible drug components against the avian flu virus H5N1 using the EGEE Grid infrastructure. Schematic presentation of the avian flu virus.The distribution of the EGEE sites in the world on which the avian flu scan was performed. The goal was to find potential compounds that can inhibit the activities of an enzyme on the surface of the influenza virus, the so-called neuraminidase, subtype N1. Using the Grid to identify the most promising leads for biological tests could speed up the development process for drugs against the influenza virus. Co-ordinated by CERN and funded by the European Commission, the EGEE project (Enabling Grids for E-sciencE) aims to set up a worldwide grid infrastructure for science. The challenge of the in silico drug discovery application is to identify those molecules which can dock on the active sites of the virus in order to inhibit its action. To study the impact of small scale mutations on drug r...

  9. NSTAR Smart Grid Pilot

    Rabari, Anil [NSTAR Electric, Manchester, NH (United States); Fadipe, Oloruntomi [NSTAR Electric, Manchester, NH (United States)

    2014-03-31

    NSTAR Electric & Gas Corporation (“the Company”, or “NSTAR”) developed and implemented a Smart Grid pilot program beginning in 2010 to demonstrate the viability of leveraging existing automated meter reading (“AMR”) deployments to provide much of the Smart Grid functionality of advanced metering infrastructure (“AMI”), but without the large capital investment that AMI rollouts typically entail. In particular, a central objective of the Smart Energy Pilot was to enable residential dynamic pricing (time-of-use “TOU” and critical peak rates and rebates) and two-way direct load control (“DLC”) by continually capturing AMR meter data transmissions and communicating through customer-sited broadband connections in conjunction with a standardsbased home area network (“HAN”). The pilot was supported by the U.S. Department of Energy’s (“DOE”) through the Smart Grid Demonstration program. NSTAR was very pleased to not only receive the funding support from DOE, but the guidance and support of the DOE throughout the pilot. NSTAR is also pleased to report to the DOE that it was able to execute and deliver a successful pilot on time and on budget. NSTAR looks for future opportunities to work with the DOE and others in future smart grid projects.

  10. Grid: From EGEE to EGI and from INFN-Grid to IGI

    Giselli, A.; Mazzuccato, M.

    2009-01-01

    In the last fifteen years the approach of the computational Grid has changed the way to use computing resources. Grid computing has raised interest worldwide in academia, industry, and government with fast development cycles. Great efforts, huge funding and resources have been made available through national, regional and international initiatives aiming at providing Grid infrastructures, Grid core technologies, Grid middle ware and Grid applications. The Grid software layers reflect the architecture of the services developed so far by the most important European and international projects. In this paper Grid e-Infrastructure story is given, detailing European, Italian and international projects such as EGEE, INFN-Grid and NAREGI. In addition the sustainability issue in the long-term perspective is described providing plans by European and Italian communities with EGI and IGI.

  11. Basic study on the development of low exposure CT with Frisch grid avalanche diode. JAERI's nuclear research promotion program, H13-011 (Contract research)

    Katagiri, Masaki; Onabe, Hideaki

    2005-03-01

    For the development of low exposure CT, we have conducted a basic study on Frisch grid avalanche diode detector to realize a high efficiency, high counting rate X-ray detector. First, we fabricated Frisch grid Si detector made of one crystal and studied their features. For the development of X-ray detector with higher performance, bonding semiconductor wafers, including different semiconductors, such as Si and CdTe, is necessary. We have bonded Si wafers by surface activation method and studied on the electric performance of bonded Si wafers. The current-voltage curve of bonded pn Si wafers showed rectifying characteristics, although Si pn junctions are made by diffusion method, generally. Second, we proposed a low dose exposure X-ray transmission method using filtered X-ray and energy subtraction method. The dose exposure with this method is estimated as low as 30% of that of using white X-rays. If we compare the dose exposure of conventional current measurement method, we would conclude further advantage of this method. With the combination of low dose exposure X-ray transmission method and the Frisch grid detector, high performance X-ray transmission method and low exposure CT system will be developed in future. (author)

  12. The Cardiovascular Research Grid (CVRG)

    U.S. Department of Health & Human Services — The CardioVascular Research Grid (CVRG) project is creating an infrastructure for sharing cardiovascular data and data analysis tools. CVRG tools are developed using...

  13. Governments plan data grid projects

    Thibodeau, Patrick

    2007-01-01

    "Some governments and not-for-profit organizations such as hospitals are beginning to look at data grid technology as a means to improve servies, lower operating costs and spur economic development." (1 page)

  14. SU-F-T-506: Development and Commissioning of the Effective and Efficient Grid Therapy Using High Dose Rate Flattening Filter Free Beam and Multileaf Collimator

    Liu, M; Wen, N; Beyer, C; Siddiqui, F; Chetty, I; Zhao, B [Henry Ford Health System, Detroit, MI (United States)

    2016-06-15

    Purpose: Treating bulky tumors with grid therapy (GT) has demonstrated high response rates. Long delivery time (∼15min), with consequent increased risk of intrafraction motion, is a major disadvantage of conventional MLC-based GT (MLC-GT). The goal of this study was to develop and commission a MLC-GT technique with similar dosimetric characteristics, but more efficient delivery. Methods: Grid plan was designed with 10X-FFF (2400MU/min) beam and MLC in a commercial treatment planning system (TPS). Grid size was 1cm by 1cm and grid-to-grid distance was 2cm. Field-in-field technique was used to flatten the dose profile at depth of 10cm. Prescription was 15Gy at 1.5cm depth. Doses were verified at depths of 1.5cm, 5cm and 10cm. Point dose was measured with a plastic scintillator detector (PSD) while the planar dose was measured with calibrated Gafchromic EBT3 films in a 20cm think, 30cmx30cm solid water phantom. The measured doses were compared to the doses calculated in the treatment planning system. Percent depth dose (PDD) within the grid was also measured using EBT3 film. Five clinical cases were planned to compare beam-on time. Results: The valley-to-peak dose ratio at the 3 depths was approximately 10–15%, which is very similar to published result. The average point dose difference between the PSD measurements and TPS calculation is 2.1±0.6%. Film dosimetry revealed good agreement between the delivered and calculated dose. The average gamma passing rates at the 3 depths were 95% (3%, 1mm). The average percent difference between the measured PDD and calculated PDD was 2.1% within the depth of 20cm. The phantom plan delivery time was 3.6 min. Average beam-on time was reduced by 66.1±5.6% for the 5 clinical cases. Conclusion: An effective and efficient GT technique was developed and commissioned for the treatment of bulky tumors using FFF beam combined with MLC and automation. The Department of Radiation Oncology at Henry Ford Health System receives research

  15. Smart Grid Communications System Blueprint

    Clark, Adrian; Pavlovski, Chris

    2010-10-01

    Telecommunications operators are well versed in deploying 2G and 3G wireless networks. These networks presently support the mobile business user and/or retail consumer wishing to place conventional voice calls and data connections. The electrical power industry has recently commenced transformation of its distribution networks by deploying smart monitoring and control devices throughout their networks. This evolution of the network into a `smart grid' has also motivated the need to deploy wireless technologies that bridge the communication gap between the smart devices and information technology systems. The requirements of these networks differ from traditional wireless networks that communications operators have deployed, which have thus far forced energy companies to consider deploying their own wireless networks. We present our experience in deploying wireless networks to support the smart grid and highlight the key properties of these networks. These characteristics include application awareness, support for large numbers of simultaneous cell connections, high service coverage and prioritized routing of data. We also outline our target blueprint architecture that may be useful to the industry in building wireless and fixed networks to support the smart grid. By observing our experiences, telecommunications operators and equipment manufacturers will be able to augment their current networks and products in a way that accommodates the needs of the emerging industry of smart grids and intelligent electrical networks.

  16. The surveillance error grid.

    Klonoff, David C; Lias, Courtney; Vigersky, Robert; Clarke, William; Parkes, Joan Lee; Sacks, David B; Kirkman, M Sue; Kovatchev, Boris

    2014-07-01

    Currently used error grids for assessing clinical accuracy of blood glucose monitors are based on out-of-date medical practices. Error grids have not been widely embraced by regulatory agencies for clearance of monitors, but this type of tool could be useful for surveillance of the performance of cleared products. Diabetes Technology Society together with representatives from the Food and Drug Administration, the American Diabetes Association, the Endocrine Society, and the Association for the Advancement of Medical Instrumentation, and representatives of academia, industry, and government, have developed a new error grid, called the surveillance error grid (SEG) as a tool to assess the degree of clinical risk from inaccurate blood glucose (BG) monitors. A total of 206 diabetes clinicians were surveyed about the clinical risk of errors of measured BG levels by a monitor. The impact of such errors on 4 patient scenarios was surveyed. Each monitor/reference data pair was scored and color-coded on a graph per its average risk rating. Using modeled data representative of the accuracy of contemporary meters, the relationships between clinical risk and monitor error were calculated for the Clarke error grid (CEG), Parkes error grid (PEG), and SEG. SEG action boundaries were consistent across scenarios, regardless of whether the patient was type 1 or type 2 or using insulin or not. No significant differences were noted between responses of adult/pediatric or 4 types of clinicians. Although small specific differences in risk boundaries between US and non-US clinicians were noted, the panel felt they did not justify separate grids for these 2 types of clinicians. The data points of the SEG were classified in 15 zones according to their assigned level of risk, which allowed for comparisons with the classic CEG and PEG. Modeled glucose monitor data with realistic self-monitoring of blood glucose errors derived from meter testing experiments plotted on the SEG when compared to

  17. Decennial scheme of grid development 2016: National component + synthesis, Regional component, Regional sheets. Version 1 submitted to public consultation - December 2016, final version after public consultation - January 2017

    2016-12-01

    Two versions of the same decennial scheme are gathered. The first one has been published before public consultation, and the second one after, and thus contains some evolutions. This decennial scheme presents an overview of the main electric power transport infrastructures envisaged for the ten years to come. It notably highlights the different orientations of the planned development: to streamline transits and to ease mutual supports between neighbouring countries, to streamline transits between French regions, to support consumption evolution in territories, to integrate electric power production means, and to ensure a safe operation of the power system. Main projects are more precisely presented while maps and synthetic tables propose a general overview. After this national approach, the report proposes syntheses for the different French regions. These syntheses address the present grid situation, and propose a list and a map of works which have been commissioned in 2016, a recall of regional ambitions regarding climate and energy (Climate-air-energy regional scheme, SRCAE) and renewable energies (regional scheme for the connection of renewable energies to the grid, S3REnR), a list and a map of planned projects, and a presentation of perspectives of grid development beyond a 10 year horizon

  18. Using a Community-Engaged Research (CEnR) approach to develop and pilot a photo grid method to gain insights into early child health and development in a socio-economic disadvantaged community.

    Lowrie, Emma; Tyrrell-Smith, Rachel

    2017-01-01

    This paper reports on the use of a Community-Engaged Research (CEnR) approach to develop a new research tool to involve members of the community in thinking about priorities for early child health and development in a deprived area of the UK. The CEnR approach involves researchers, professionals and members of the public working together during all stages of research and development.Researchers used a phased approach to the development of a Photo Grid tool including reviewing tools which could be used for community engagement, and testing the new tool based on feedback from workshops with local early years professionals and parents of young children.The Photo Grid tool is a flat square grid on which photo cards can be placed. Participants were asked to pace at the top of the grid the photos they considered most important for early child health and development, working down to the less important ones at the bottom. The findings showed that the resulting Photo Grid tool was a useful and successful method of engaging with the local community. The evidence for this is the high numbers of participants who completed a pilot study and who provided feedback on the method. By involving community members throughout the research process, it was possible to develop a method that would be acceptable to the local population, thus decreasing the likelihood of a lack of engagement. The success of the tool is therefore particularly encouraging as it engages "seldom heard voices," such as those with low literacy. The aim of this research was to consult with professionals and parents to develop a new research toolkit (Photo Grid), to understand community assets and priorities in relation to early child health and development in Blackpool, a socio-economic disadvantaged community. A Community-Engaged Research (CEnR) approach was used to consult with community members. This paper describes the process of using a CEnR approach in developing a Photo Grid toolkit. A phased CEnR approach

  19. 'Renewables-Friendly' Grid Development Strategies: Experience in the United States, Potential Lessons for China (Chinese Translation)

    Hurlbut, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Lab. (NREL), Golden, CO (United States); Porter, Kevin [Exeter Associates, Columbia, MD (United States); Arent, Douglas J. [Joint Institute for Strategic Energy Analysis, Golden, CO (United States)

    2015-10-03

    This is a Chinese translation of NREL/TP-6A20-64940. This report aims to help China's reform effort by providing a concise summary of experience in the United States with 'renewables-friendly' grid management, focusing on experiences that might be applicable to China. It focuses on utility-scale renewables and sets aside issues related to distributed generation.

  20. The Grid PC farm

    Maximilien Brice

    2006-01-01

    Housed in the CERN Computer Centre, these banks of computers process and store data produced on the CERN systems. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDs 20 km tall. To handle this huge amount of data, CERN has also developed the Grid, allowing processing power to be shared between computer centres around the world.

  1. Smart Grid Security. White Paper

    NONE

    2011-09-15

    One of the biggest concerns for smart grid developers is cyber security due to the reliance on IT communication networks. While the current grid is not immune to energy theft, fraud and malicious cyber-attacks, the smart grid poses new security issues. It is more likely now that theft, malicious attack and fraud will be committed by people working remotely from a laptop several miles away, even in a different country, than someone physically manipulating meters. This makes it difficult to predict where attacks will come from.

  2. Security and privacy in smart grids

    Xiao, Yang

    2013-01-01

    Presenting the work of prominent researchers working on smart grids and related fields around the world, Security and Privacy in Smart Grids identifies state-of-the-art approaches and novel technologies for smart grid communication and security. It investigates the fundamental aspects and applications of smart grid security and privacy and reports on the latest advances in the range of related areas-making it an ideal reference for students, researchers, and engineers in these fields. The book explains grid security development and deployment and introduces novel approaches for securing today'

  3. 22 CFR 226.31 - Insurance coverage.

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Insurance coverage. 226.31 Section 226.31 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Post-award Requirements Property Standards § 226.31 Insurance coverage. Recipients...

  4. Legislating health care coverage for the unemployed.

    Palley, H A; Feldman, G; Gallner, I; Tysor, M

    1985-01-01

    Because the unemployed and their families are often likely to develop stress-related health problems, ensuring them access to health care is a public health issue. Congressional efforts thus far to legislate health coverage for the unemployed have proposed a system that recognizes people's basic need for coverage but has several limitations.

  5. Calculation approaches for grid usage fees to influence the load curve in the distribution grid level

    Illing, Bjoern

    2014-01-01

    Dominated by the energy policy the decentralized German energy market is changing. One mature target of the government is to increase the contribution of renewable generation to the gross electricity consumption. In order to achieve this target disadvantages like an increased need for capacity management occurs. Load reduction and variable grid fees offer the grid operator solutions to realize capacity management by influencing the load profile. The evolution of the current grid fees towards more causality is required to adapt these approaches. Two calculation approaches are developed in this assignment. On the one hand multivariable grid fees keeping the current components demand and energy charge. Additional to the grid costs grid load dependent parameters like the amount of decentralized feed-ins, time and local circumstances as well as grid capacities are considered. On the other hand the grid fee flat-rate which represents a demand based model on a monthly level. Both approaches are designed to meet the criteria for future grid fees. By means of a case study the effects of the grid fees on the load profile at the low voltage grid is simulated. Thereby the consumption is represented by different behaviour models and the results are scaled at the benchmark grid area. The resulting load curve is analyzed concerning the effects of peak load reduction as well as the integration of renewable energy sources. Additionally the combined effect of grid fees and electricity tariffs is evaluated. Finally the work discusses the launching of grid fees in the tense atmosphere of politics, legislation and grid operation. Results of this work are two calculation approaches designed for grid operators to define the grid fees. Multivariable grid fees are based on the current calculation scheme. Hereby demand and energy charges are weighted by time, locational and load related dependencies. The grid fee flat-rate defines a limitation in demand extraction. Different demand levels

  6. Grid Integration Research | Wind | NREL

    Grid Integration Research Grid Integration Research Researchers study grid integration of wind three wind turbines with transmission lines in the background. Capabilities NREL's grid integration electric power system operators to more efficiently manage wind grid system integration. A photo of

  7. Profitability of smart grid solutions applied in power grid

    Katić Nenad A.

    2016-01-01

    Full Text Available The idea of a Smart Grid solution has been developing for years, as complete solution for a power utility, consisting of different advanced technologies aimed at improving of the efficiency of operation. The trend of implementing various smart systems continues, e.g. Energy Management Systems, Grid Automation Systems, Advanced Metering Infrastructure, Smart power equipment, Distributed Energy Resources, Demand Response systems, etc. Futhermore, emerging technologies, such as energy storages, electrical vehicles or distributed generators, become integrated in distribution networks and systems. Nowadays, the idea of a Smart Grid solution becomes more realistic by full integration of all advanced operation technologies (OT within IT environment, providing the complete digitalization of an Utility (IT/OT integration. The overview of smart grid solutions, estimation of investments, operation costs and possible benefits are presented in this article, with discusison about profitability of such systems.

  8. Grid computing the European Data Grid Project

    Segal, B; Gagliardi, F; Carminati, F

    2000-01-01

    The goal of this project is the development of a novel environment to support globally distributed scientific exploration involving multi- PetaByte datasets. The project will devise and develop middleware solutions and testbeds capable of scaling to handle many PetaBytes of distributed data, tens of thousands of resources (processors, disks, etc.), and thousands of simultaneous users. The scale of the problem and the distribution of the resources and user community preclude straightforward replication of the data at different sites, while the aim of providing a general purpose application environment precludes distributing the data using static policies. We will construct this environment by combining and extending newly emerging "Grid" technologies to manage large distributed datasets in addition to computational elements. A consequence of this project will be the emergence of fundamental new modes of scientific exploration, as access to fundamental scientific data is no longer constrained to the producer of...

  9. Development of the Large-Scale Statistical Analysis System of Satellites Observations Data with Grid Datafarm Architecture

    Yamamoto, K.; Murata, K.; Kimura, E.; Honda, R.

    2006-12-01

    In the Solar-Terrestrial Physics (STP) field, the amount of satellite observation data has been increasing every year. It is necessary to solve the following three problems to achieve large-scale statistical analyses of plenty of data. (i) More CPU power and larger memory and disk size are required. However, total powers of personal computers are not enough to analyze such amount of data. Super-computers provide a high performance CPU and rich memory area, but they are usually separated from the Internet or connected only for the purpose of programming or data file transfer. (ii) Most of the observation data files are managed at distributed data sites over the Internet. Users have to know where the data files are located. (iii) Since no common data format in the STP field is available now, users have to prepare reading program for each data by themselves. To overcome the problems (i) and (ii), we constructed a parallel and distributed data analysis environment based on the Gfarm reference implementation of the Grid Datafarm architecture. The Gfarm shares both computational resources and perform parallel distributed processings. In addition, the Gfarm provides the Gfarm filesystem which can be as virtual directory tree among nodes. The Gfarm environment is composed of three parts; a metadata server to manage distributed files information, filesystem nodes to provide computational resources and a client to throw a job into metadata server and manages data processing schedulings. In the present study, both data files and data processes are parallelized on the Gfarm with 6 file system nodes: CPU clock frequency of each node is Pentium V 1GHz, 256MB memory and40GB disk. To evaluate performances of the present Gfarm system, we scanned plenty of data files, the size of which is about 300MB for each, in three processing methods: sequential processing in one node, sequential processing by each node and parallel processing by each node. As a result, in comparison between the

  10. Smart Grid Demonstration Project

    Miller, Craig [National Rural Electric Cooperative Association, Arlington, VA (United States); Carroll, Paul [National Rural Electric Cooperative Association, Arlington, VA (United States); Bell, Abigail [National Rural Electric Cooperative Association, Arlington, VA (United States)

    2015-03-11

    posted for universal access at www.nreca.coop/smartgrid. This research is available for widespread distribution to both cooperative members and non-members. These reports are listed in Table 1.2. Interoperability: The deliverable in this area was the advancement of the MultiSpeak™ interoperability standard from version 4.0 to version 5.0, and improvement in the MultiSpeak™ documentation to include more than 100 use cases. This deliverable substantially expanded the scope and usability of MultiSpeak, ™ the most widely deployed utility interoperability standard, now in use by more than 900 utilities. MultiSpeak™ documentation can be accessed only at www.multispeak.org. Cyber Security: NRECA’s starting point was to develop cyber security tools that incorporated succinct guidance on best practices. The deliverables were: cyber security extensions to MultiSpeak,™ which allow more security message exchanges; a Guide to Developing a Cyber Security and Risk Mitigation Plan; a Cyber Security Risk Mitigation Checklist; a Cyber Security Plan Template that co-ops can use to create their own cyber security plans; and Security Questions for Smart Grid Vendors.

  11. 84-KILOMETER RADIOLOGICAL MONITORING GRID

    L. Roe

    2000-01-01

    The purpose of this calculation is to document the development of a radial grid that is suitable for evaluating the pathways and potential impacts of a release of radioactive materials to the environment within a distance of 84 kilometers (km). The center of the grid represents an approximate location from which a potential release of radioactive materials could originate. The center is located on Nevada State Plane coordinates Northing 765621.5, and Easting 570433.6, which is on the eastern side of Exile Hill at the Yucca Mountain site. The North Portal Pad is located over this point. The grid resulting from this calculation is intended for use primarily in the Radiological Monitoring Program (RadMP). This grid also is suitable for use in Biosphere Modeling and other Yucca Mountain Site Characteristic Project (YMP) activities that require the evaluation of data referenced by spatial or geographic coordinates

  12. Grids, Clouds, and Virtualization

    Cafaro, Massimo; Aloisio, Giovanni

    This chapter introduces and puts in context Grids, Clouds, and Virtualization. Grids promised to deliver computing power on demand. However, despite a decade of active research, no viable commercial grid computing provider has emerged. On the other hand, it is widely believed - especially in the Business World - that HPC will eventually become a commodity. Just as some commercial consumers of electricity have mission requirements that necessitate they generate their own power, some consumers of computational resources will continue to need to provision their own supercomputers. Clouds are a recent business-oriented development with the potential to render this eventually as rare as organizations that generate their own electricity today, even among institutions who currently consider themselves the unassailable elite of the HPC business. Finally, Virtualization is one of the key technologies enabling many different Clouds. We begin with a brief history in order to put them in context, and recall the basic principles and concepts underlying and clearly differentiating them. A thorough overview and survey of existing technologies provides the basis to delve into details as the reader progresses through the book.

  13. Resilient Grid Operational Strategies

    Pasqualini, Donatella [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-01

    Extreme weather-related disturbances, such as hurricanes, are a leading cause of grid outages historically. Although physical asset hardening is perhaps the most common way to mitigate the impacts of severe weather, operational strategies may be deployed to limit the extent of societal and economic losses associated with weather-related physical damage.1 The purpose of this study is to examine bulk power-system operational strategies that can be deployed to mitigate the impact of severe weather disruptions caused by hurricanes, thereby increasing grid resilience to maintain continuity of critical infrastructure during extreme weather. To estimate the impacts of resilient grid operational strategies, Los Alamos National Laboratory (LANL) developed a framework for hurricane probabilistic risk analysis (PRA). The probabilistic nature of this framework allows us to estimate the probability distribution of likely impacts, as opposed to the worst-case impacts. The project scope does not include strategies that are not operations related, such as transmission system hardening (e.g., undergrounding, transmission tower reinforcement and substation flood protection) and solutions in the distribution network.

  14. Smart Grid Risk Management

    Abad Lopez, Carlos Adrian

    Current electricity infrastructure is being stressed from several directions -- high demand, unreliable supply, extreme weather conditions, accidents, among others. Infrastructure planners have, traditionally, focused on only the cost of the system; today, resilience and sustainability are increasingly becoming more important. In this dissertation, we develop computational tools for efficiently managing electricity resources to help create a more reliable and sustainable electrical grid. The tools we present in this work will help electric utilities coordinate demand to allow the smooth and large scale integration of renewable sources of energy into traditional grids, as well as provide infrastructure planners and operators in developing countries a framework for making informed planning and control decisions in the presence of uncertainty. Demand-side management is considered as the most viable solution for maintaining grid stability as generation from intermittent renewable sources increases. Demand-side management, particularly demand response (DR) programs that attempt to alter the energy consumption of customers either by using price-based incentives or up-front power interruption contracts, is more cost-effective and sustainable in addressing short-term supply-demand imbalances when compared with the alternative that involves increasing fossil fuel-based fast spinning reserves. An essential step in compensating participating customers and benchmarking the effectiveness of DR programs is to be able to independently detect the load reduction from observed meter data. Electric utilities implementing automated DR programs through direct load control switches are also interested in detecting the reduction in demand to efficiently pinpoint non-functioning devices to reduce maintenance costs. We develop sparse optimization methods for detecting a small change in the demand for electricity of a customer in response to a price change or signal from the utility

  15. Parallel grid population

    Wald, Ingo; Ize, Santiago

    2015-07-28

    Parallel population of a grid with a plurality of objects using a plurality of processors. One example embodiment is a method for parallel population of a grid with a plurality of objects using a plurality of processors. The method includes a first act of dividing a grid into n distinct grid portions, where n is the number of processors available for populating the grid. The method also includes acts of dividing a plurality of objects into n distinct sets of objects, assigning a distinct set of objects to each processor such that each processor determines by which distinct grid portion(s) each object in its distinct set of objects is at least partially bounded, and assigning a distinct grid portion to each processor such that each processor populates its distinct grid portion with any objects that were previously determined to be at least partially bounded by its distinct grid portion.

  16. Development of an economical model to determine an appropriate feed-in tariff for grid-connected solar PV electricity in all states of Australia

    Zahedi, A.

    2009-01-01

    Australia is a country with a vast amount of natural resources including sun and wind. Australia lies between latitude of 10-45 S and longitude of 112-152 E, with a daily solar exposure of between less than 3 MJ/(m 2 day) in winter and more than 30 MJ/(m 2 day) in summer. Global solar radiation in Australia varies between minimum of 3285 MJ/(m 2 year) in Hobart to 8760 MJ/(m 2 year) in Northern Territory. As a result of this wide range of radiation level there will be a big difference between costs of solar PV electricity in different locations. A study we have recently conducted on the solar PV electricity price in all states of Australia. For this purpose we have developed an economical model and a computer simulation to determine the accurate unit price of grid-connected roof-top solar photovoltaic (PV) electricity in A$/kWh for all state of Australia. The benefit of this computer simulation is that we can accurately determine the most appropriate feed-in tariff of grid-connected solar PV energy system. The main objective of this paper is to present the results of this study. A further objective of this paper is to present the details of the unit price of solar PV electricity in the state of Victoria in each month and then to compare with electricity price from conventional power systems, which is currently applied to this state. The state Victoria is located south of Australia and in terms of sun radiation is second lowest compared with the other Australian states. The computer simulation developed for this study makes it possible to determine the cost of grid-connected solar PV electricity at any location in any country based on availability of average daily solar exposure of each month as well as economical factors of the country. (author)

  17. Conference on grid integration of renewable energies

    Fontaine, Pierre; Goeke, Berthold; Mignon, Herve; Brakelmann, Heinrich; Huebner, Gundula; Tanja Schmedes; Remy Garaude Verdier; Pierre-Guy Therond; Werner Diwald

    2012-01-01

    The French-German office for Renewable energies (OFAEnR) organised a conference on grid integration of renewable energies. In the framework of this French-German exchange of experience, about a hundred of participants exchanged views on the similarities and differences between the French and German approaches of renewable energies integration to grids. This document brings together the available presentations (slides) made during this event: 1 - Power grid development - Policy and challenges (Pierre Fontaine); 2 - Grid Development: German Strategy (Berthold Goeke); 3 - Power grids development: situational analysis (Herve Mignon); 4 - Traditional Power Lines, Partial Underground Cabling and HVDC lines: Costs, Benefits and Acceptance (Heinrich Brakelmann); 5 - Transmission Lines - Local Acceptance (Gundula Huebner); 6 - eTelligence- energy meets Intelligence: experience feedback from the grid operator EWe on smart grids and the integration of renewable energies (Tanja Schmedes); 7 - Nice Grid, The French Smart Grid Project within Grid4eU (Remy Garaude Verdier); 8 - Economical Analysis Of energy Storage For Renewable energy Farms - experience of EDF en on the basis of 3 call for tender issued by the French Government in 01/2010, 11/2010, and 09/2011: what conditions for a real deployment (Pierre-Guy Therond); 9 - Hydrogen as a renewable energies storage mean (Werner Diwald)

  18. DIGRD: an interactive grid generating program

    Foote, H.P.; Rice, W.A.; Kincaid, C.T.

    1982-11-01

    Pacific Northwest Laboratory has completed the development and documentation of an interactive grid generating program (DIGRD, digitize grid). This program is designed to rapidly generate or modify grids necessary for the unsaturated flow code TRUST. In addition to the code, a user's manual was prepared. Unfortunately, the computer hardware that comprises the PNL interactive graphics capability is unique. Direct technology transfer is not possible, therefore, this report is intended to convey the utility of interactive graphics in supplying a grid generating capability. DIGRD has already been effectively used in the preparation of grids for the analysis of leachate movement from uranium mill tailings. The principal conclusion is that the interactive graphics employed in DIGRD are useful and economical in the development of complex grids. Grid generation activities that previously took between a half- and a full-man month can now be completed in less than a week. DIGRD users have recommended development of an uniform grid of either rectangles or equilateral triangles, which could be superimposed on any domain and then adjusted through the DIGRD program to match the boundaries of a tailings disposal facility. This improvement to the DIGRD package could further reduce the effort in grid generation while providing more optimal grids

  19. Development of sensor-less control strategies for grid connected PMSG based variable speed wind energy conversion system with improved power quality features

    Chandra, A. [Quebec Univ., Montreal, PQ (Canada). Dept. of Electrical Engineering

    2010-07-01

    Interest in renewable energy sources has grown in recent years in response to concerns of increasing pollution levels and depleting fossil fuels. Among renewable energy sources, wind energy generation is the fastest growing technology and one of the most cost-effective and environmental friendly means to generate electricity from renewable sources. Modern wind turbines are ready to be deployed in large scale as a result of recent developments in wind power technology. Variable speed permanent magnet synchronous generators (PMSG) based wind energy conversion systems (WECS) are becoming more popular. The use of a permanent magnet reduces size, cost and weight of overall WECS. In addition, the absence of field winding and its excitation system avoids heat dissipation in the rotor winding, thereby improving overall efficiency of the WECS. This type of configuration is more appropriate for remote locations, particularly for off-shore wind application, where the geared doubly fed induction generator usually requires regular maintenance due to tearing-wearing in brushes, windings and gear box. This presentation discussed the development of sensor-less control strategies for grid connected PMSG based variable speed wind energy conversion system with improved power quality features. A novel adaptive network-based fuzzy inference system was used to estimate the speed and position of variable speed PMSG under fluctuating wind conditions. A novel control strategy was developed for the grid interfacing inverter incorporating power quality improvement features at point of common coupling.

  20. Solar Energy Grid Integration Systems. Final Report of the Princeton Power Systems Development of the 100kW Demand Response Inverter.

    Bower, Ward Isaac; Heavener, Paul (Princeton Power Systems, Inc., Princeton, NJ); Sena-Henderson, Lisa; Hammell, Darren (Princeton Power Systems, Inc., Princeton, NJ); Holveck, Mark (Princeton Power Systems, Inc., Princeton, NJ); David, Carolyn; Akhil, Abbas Ali; Gonzalez, Sigifredo

    2012-01-01

    Initiated in 2008, the Solar Energy Grid Integration (SEGIS) program is a partnership involving the U.S. Department of Energy, Sandia National Laboratories, electric utilities, academic institutions and the private sector. Recognizing the need to diversify the nation's energy portfolio, the SEGIS effort focuses on specific technologies needed to facilitate the integration of large-scale solar power generation into the nation's power grid Sandia National Laboratories (SNL) awarded a contract to Princeton Power Systems, Inc., (PPS) to develop a 100kW Advanced AC-link SEGIS inverter prototype under the Department of Energy Solar Energy Technologies Program for near-term commercial applications. This SEGIS initiative emphasizes the development of advanced inverters, controllers, communications and other balance-of-system components for photovoltaic (PV) distributed power applications. The SEGIS Stage 3 Contract was awarded to PPS on July 28, 2010. PPS developed and implemented a Demand Response Inverter (DRI) during this three-stage program. PPS prepared a 'Site Demonstration Conference' that was held on September 28, 2011, to showcase the cumulative advancements. This demo of the commercial product will be followed by Underwriters Laboratories, Inc., certification by the fourth quarter of 2011, and simultaneously the customer launch and commercial production sometime in late 2011 or early 2012. This final report provides an overview of all three stages and a full-length reporting of activities and accomplishments in Stage 3.

  1. Smart grid security

    Goel, Sanjay; Papakonstantinou, Vagelis; Kloza, Dariusz

    2015-01-01

    This book on smart grid security is meant for a broad audience from managers to technical experts. It highlights security challenges that are faced in the smart grid as we widely deploy it across the landscape. It starts with a brief overview of the smart grid and then discusses some of the reported attacks on the grid. It covers network threats, cyber physical threats, smart metering threats, as well as privacy issues in the smart grid. Along with the threats the book discusses the means to improve smart grid security and the standards that are emerging in the field. The second part of the b

  2. The Knowledge Grid

    Zhuge, Hai

    2004-01-01

    The Knowledge Grid is an intelligent and sustainable interconnection environment that enables people and machines to effectively capture, publish, share and manage knowledge resources. It also provides appropriate on-demand services to support scientific research, technological innovation, cooperative teamwork, problem solving, and decision making. It incorporates epistemology and ontology to reflect human cognitive characteristics; exploits social, ecological and economic principles; and adopts techniques and standards developed during work toward the future web. This book presents its methodology, theory, models and applications systematically for the first time.

  3. Overview of Grid Codes for Photovoltaic Integration

    Zheng, Qianwei; Li, Jiaming; Ai, Xiaomeng

    2017-01-01

    The increasing grid-connected photovoltaic (PV) power stations might threaten the safety and stability of power system. Therefore, the grid code is developed for PV power stations to ensure the security of PV integrated power systems. In this paper, requirements for PV power integration in differ......The increasing grid-connected photovoltaic (PV) power stations might threaten the safety and stability of power system. Therefore, the grid code is developed for PV power stations to ensure the security of PV integrated power systems. In this paper, requirements for PV power integration...

  4. High energy physics and grid computing

    Yu Chuansong

    2004-01-01

    The status of the new generation computing environment of the high energy physics experiments is introduced briefly in this paper. The development of the high energy physics experiments and the new computing requirements by the experiments are presented. The blueprint of the new generation computing environment of the LHC experiments, the history of the Grid computing, the R and D status of the high energy physics grid computing technology, the network bandwidth needed by the high energy physics grid and its development are described. The grid computing research in Chinese high energy physics community is introduced at last. (authors)

  5. Power Grid:Connecting the world

    Liu Liang; Zhu Li

    2012-01-01

    With the acceleration of global economic integration,the trend has been towards opening up markets.Large enterprises in countries around the world,the developed countries in particular,attach great importance to going abroad,with the aim to optimally allocate energy resources in a wider range.Actively responding to the "going out" strategy of the State,the two giant power grid enterprises in China,State Grid Corporation of China (SGCC) and China Southern Power Grid (CSG),have made plans for grid development in line with the State's energy strategy and global resources allocation.

  6. Development of technologies on innovative-simplified nuclear power plant using high-efficiency steam injectors (8) numerical simulation using SOROBAN-grid CIP method

    Yasutaka Sakurai; Takashi Yabe; Tomomasa Ohkubo; Yoichi Ogata; Michitsugu Mori

    2005-01-01

    Generally, there are two coordinate systems in computation of fluid dynamics: curvilinear coordinate or Cartesian coordinate. The former is suitable for describing complex figure, but it cannot get high accuracy. On the other hand, the latter can easily increase the accuracy, but it needs a large number of grids to describe complex figure. In this paper, we propose a new grid generating method, the Soroban grid, which has large capability for treating complex figure and does not lose the accuracy. Coupling this grid generating method and the CIP method, we can get flexibility to describe complex figure without loosing (3rd order) accuracy. Since the Soroban grid is unstructured grid, we can not use the staggered grid and had better use the co-location grid. Although the fluid computation in the co-location grid is usually unstable, we succeeded in calculating the multi-phase flow that has large density difference applying the C-CUP method to this grid system. In this paper, we shall introduce this grid generating method and apply these methods to simulate the steam injector of power plant. (authors)

  7. Toward a Grid Work flow Formal Composition

    Hlaoui, Y. B.; BenAyed, L. J.

    2007-01-01

    This paper exposes a new approach for the composition of grid work flow models. This approach proposes an abstract syntax for the UML Activity Diagrams (UML-AD) and a formal foundation for grid work flow composition in form of a work flow algebra based on UML-AD. This composition fulfils the need for collaborative model development particularly the specification and the reduction of the complexity of grid work flow model verification. This complexity has arisen with the increase in scale of grid work flow applications such as science and e-business applications since large amounts of computational resources are required and multiple parties could be involved in the development process and in the use of grid work flows. Furthermore, the proposed algebra allows the definition of work flow views which are useful to limit the access to predefined users in order to ensure the security of grid work flow applications. (Author)

  8. A Novel Deployment Scheme Based on Three-Dimensional Coverage Model for Wireless Sensor Networks

    Xiao, Fu; Yang, Yang; Wang, Ruchuan; Sun, Lijuan

    2014-01-01

    Coverage pattern and deployment strategy are directly related to the optimum allocation of limited resources for wireless sensor networks, such as energy of nodes, communication bandwidth, and computing power, and quality improvement is largely determined by these for wireless sensor networks. A three-dimensional coverage pattern and deployment scheme are proposed in this paper. Firstly, by analyzing the regular polyhedron models in three-dimensional scene, a coverage pattern based on cuboids is proposed, and then relationship between coverage and sensor nodes' radius is deduced; also the minimum number of sensor nodes to maintain network area's full coverage is calculated. At last, sensor nodes are deployed according to the coverage pattern after the monitor area is subdivided into finite 3D grid. Experimental results show that, compared with traditional random method, sensor nodes number is reduced effectively while coverage rate of monitor area is ensured using our coverage pattern and deterministic deployment scheme. PMID:25045747

  9. Production of grids in plastic detectors

    Birabeau, J P; Brun, R; Cordaillat, A; Mendola, Onofrio

    1972-01-01

    In order to facilitate the locating of tracks of charged particles in cellulose nitrate and polycarbonate (makrofol, lexan) foils, a method has been developed for the photo-deposition of translucent coordinate grids on this materials. The grids are resistant to the strongly caustic solutions used in developing tracks in plastic foils. (9 refs) .

  10. Deposition of grids on plastic detectors

    Birabeau, J P; Mendola, Onofrio

    1972-01-01

    In order to facilitate the locating of tracks of charged particles in cellulose-nitrate and polycarbonate (Makrofol, Lexan) foils, a method has been developed for the photo-deposition of translucent coordinate grids on these materials. The grids are resistant to the strongly caustic solutions used in developing tracks in plastic foils. (9 refs) .

  11. Flow Battery Solution for Smart Grid Applications

    none,

    2014-11-30

    To address future grid requirements, a U.S. Department of Energy ARRA Storage Demonstration program was launched in 2009 to commercialize promising technologies needed for stronger and more renewables-intensive grids. Raytheon Ktech and EnerVault received a cost-share grant award from the U.S. Department of Energy to develop a grid-scale storage system based on EnerVault’s iron-chromium redox flow battery technology.

  12. Chimera Grid Tools

    Chan, William M.; Rogers, Stuart E.; Nash, Steven M.; Buning, Pieter G.; Meakin, Robert

    2005-01-01

    Chimera Grid Tools (CGT) is a software package for performing computational fluid dynamics (CFD) analysis utilizing the Chimera-overset-grid method. For modeling flows with viscosity about geometrically complex bodies in relative motion, the Chimera-overset-grid method is among the most computationally cost-effective methods for obtaining accurate aerodynamic results. CGT contains a large collection of tools for generating overset grids, preparing inputs for computer programs that solve equations of flow on the grids, and post-processing of flow-solution data. The tools in CGT include grid editing tools, surface-grid-generation tools, volume-grid-generation tools, utility scripts, configuration scripts, and tools for post-processing (including generation of animated images of flows and calculating forces and moments exerted on affected bodies). One of the tools, denoted OVERGRID, is a graphical user interface (GUI) that serves to visualize the grids and flow solutions and provides central access to many other tools. The GUI facilitates the generation of grids for a new flow-field configuration. Scripts that follow the grid generation process can then be constructed to mostly automate grid generation for similar configurations. CGT is designed for use in conjunction with a computer-aided-design program that provides the geometry description of the bodies, and a flow-solver program.

  13. Bayesian grid matching

    Hartelius, Karsten; Carstensen, Jens Michael

    2003-01-01

    A method for locating distorted grid structures in images is presented. The method is based on the theories of template matching and Bayesian image restoration. The grid is modeled as a deformable template. Prior knowledge of the grid is described through a Markov random field (MRF) model which r...

  14. Smart grid in China

    Sommer, Simon; Ma, Zheng; Jørgensen, Bo Nørregaard

    2015-01-01

    China is planning to transform its traditional power grid in favour of a smart grid, since it allows a more economically efficient and a more environmentally friendly transmission and distribution of electricity. Thus, a nationwide smart grid is likely to save tremendous amounts of resources...

  15. 7 CFR 1737.31 - Area Coverage Survey (ACS).

    2010-01-01

    ... an ACS are provided in RUS Telecommunications Engineering and Construction Manual section 205. (e... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage... the borrower's records contain sufficient information as to subscriber development to enable cost...

  16. Final Assessment: U.S. Virgin Islands Industrial Development Park and Adjacent Facilities Energy-Efficiency and Micro-Grid Infrastructure

    Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boyd, Paul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dahowski, Robert T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Parker, Graham B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-31

    The purpose of this assessment was to undertake an assessment and analysis of cost-effective options for energy-efficiency improvements and the deployment of a micro-grid to increase the energy resilience at the U.S. Virgin Islands Industrial Development Park (IDP) and adjacent facilities in St. Croix, Virgin Islands. The Economic Development Authority sought assistance from the U.S. Department of Energy to undertake this assessment undertaken by Pacific Northwest National Laboratory. The assessment included 18 buildings plus the perimeter security lighting at the Virgin Islands Bureau of Correctional Facility, four buildings plus exterior lighting at the IDP, and five buildings (one of which is to be constructed) at the Virgin Islands Police Department for a total of 27 buildings with a total of nearly 323,000 square feet.

  17. Constructive Technology Assessment (CTA) as a tool in coverage with evidence development: the case of the 70-gene prognosis signature for breast cancer diagnostics.

    Retèl, Valesca P; Bueno-de-Mesquita, Jolien M; Hummel, Marjan J M; van de Vijver, Marc J; Douma, Kirsten F L; Karsenberg, Kim; van Dam, Frits S A M; van Krimpen, Cees; Bellot, Frank E; Roumen, Rudi M H; Linn, Sabine C; van Harten, Wim H

    2009-01-01

    Constructive Technology Assessment (CTA) is a means to guide early implementation of new developments in society, and can be used as an evaluation tool for Coverage with Evidence Development (CED). We used CTA for the introduction of a new diagnostic test in the Netherlands, the 70-gene prognosis signature (MammaPrint) for node-negative breast cancer patients. Studied aspects were (organizational) efficiency, patient-centeredness and diffusion scenarios. Pre-post structured surveys were conducted in fifteen community hospitals concerning changes in logistics and teamwork as a consequence of the introduction of the 70-gene signature. Patient-centeredness was measured by questionnaires and interviews regarding knowledge and psychological impact of the test. Diffusion scenarios, which are commonly applied in industry to anticipate on future development and diffusion of their products, have been applied in this study. Median implementation-time of the 70-gene signature was 1.2 months. Most changes were seen in pathology processes and adjuvant treatment decisions. Physicians valued the addition of the 70-gene signature information as beneficial for patient management. Patient-centeredness (n = 77, response 78 percent): patients receiving a concordant high-risk and discordant clinical low/high risk-signature showed significantly more negative emotions with respect to receiving both test-results compared with concordant low-risk and discordant clinical high/low risk-signature patients. The first scenario was written in 2004 before the introduction of the 70-gene signature and identified hypothetical developments that could influence diffusion; especially the "what-if" deviation describing a discussion on validity among physicians proved to be realistic. Differences in speed of implementation and influenced treatment decisions were seen. Impact on patients seems especially related to discordance and its successive communication. In the future, scenario drafting will lead

  18. Power grid reliability and security

    Bose, Anjan [Washington State Univ., Pullman, WA (United States); Venkatasubramanian, Vaithianathan [Washington State Univ., Pullman, WA (United States); Hauser, Carl [Washington State Univ., Pullman, WA (United States); Bakken, David [Washington State Univ., Pullman, WA (United States); Anderson, David [Washington State Univ., Pullman, WA (United States); Zhao, Chuanlin [Washington State Univ., Pullman, WA (United States); Liu, Dong [Washington State Univ., Pullman, WA (United States); Yang, Tao [Washington State Univ., Pullman, WA (United States); Meng, Ming [Washington State Univ., Pullman, WA (United States); Zhang, Lin [Washington State Univ., Pullman, WA (United States); Ning, Jiawei [Washington State Univ., Pullman, WA (United States); Tashman, Zaid [Washington State Univ., Pullman, WA (United States)

    2015-01-31

    This project has led to the development of a real-time simulation platform for electric power grids called Grid Simulator or GridSim for simulating the dynamic and information network interactions of large- scale power systems. The platform consists of physical models of power system components including synchronous generators, loads and control, which are simulated using a modified commercial power simulator namely Transient Stability Analysis Tool (TSAT) [1] together with data cleanup components, as well as an emulated substation level and wide-area power analysis components. The platform also includes realistic representations of communication network middleware that can emulate the real-time information flow back and forth between substations and control centers in wide-area power systems. The platform has been validated on a realistic 6000-bus model of the western American power system. The simulator GridSim developed in this project is the first of its kind in its ability to simulate real-time response of large-scale power grids, and serves as a cost effective real-time stability and control simulation platform for power industry.

  19. Grid Architecture 2

    Taft, Jeffrey D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-01-01

    The report describes work done on Grid Architecture under the auspices of the Department of Electricity Office of Electricity Delivery and Reliability in 2015. As described in the first Grid Architecture report, the primary purpose of this work is to provide stakeholder insight about grid issues so as to enable superior decision making on their part. Doing this requires the creation of various work products, including oft-times complex diagrams, analyses, and explanations. This report provides architectural insights into several important grid topics and also describes work done to advance the science of Grid Architecture as well.

  20. Vote for the GridCafé!

    2004-01-01

    CERN's GridCafé website (http://www.gridcafe.org) has been nominated for the 8th Annual Webby Awards, together with four other finalists in the Technical Achievement category. The Webby Awards have been hailed as the "online Oscars" by Time Magazine, and are the leading international honours for websites, so this nomination represents a significant achievement. The winner in this category last year was Google. The GridCafé website, which was launched at Telecom '03 and forms part of the Microcosm exhibit on computing, introduces Grid technology to the general public, and provides information on all major Grid projects around the world, focusing in particular on the pioneering Grid developments being carried out by CERN and its many international partners for the Large Hadron Collider project. Being nominated for a Webby Award represents a great opportunity to draw positive media attention to Grid technology, to CERN and to science in general. Last year's nominees were covered...

  1. First Thuesday - CERN, The Grid gets real

    Robertson, Leslie

    2003-01-01

    A few years ago, "the Grid" was just a vision dreamt up by some computer scientists who wanted to share processor power and data storage capacity between computers around the world - in much the same way as today's Web shares information seamlessly between millions of computers. Today, Grid technology is a huge enterprise, involving hundreds of software engineers, and generating exciting opportunities for industry. "Computing on demand", "utility computing", "web services", and "virtualisation" are just a few of the buzzwords in the IT industry today that are intimately connected to the development of Grid technology. For this third First Tuesday @CERN, the panel will survey some of the latest major breakthroughs in building international computer Grids for science. It will also provide a snapshot of Grid-related industrial activities, with contributions from both major players in the IT sector as well as emerging Grid technology start-ups.

  2. Triple-layer smart grid business model

    Ma, Zheng; Lundgaard, Morten; Jørgensen, Bo Nørregaard

    2016-01-01

    Viewing the smart grid with the theory of business models may open opportunities in understanding and capturing values in new markets. This study tries to discover and map the smart grid ecosystem-based business model framework with two different environments (sub-Saharan Africa and Denmark......), and identifies the parameters for the smart grid solutions to the emerging markets. This study develops a triple-layer business model including the organizational (Niche), environmental (Intermediate), and global (Dominators) factors. The result uncovers an interface of market factors and stakeholders...... in a generic smart grid constellation. The findings contribute the transferability potential of the smart grid solutions between countries, and indicate the potential to export and import smart grid solutions based on the business modeling....

  3. Grid Integration of Wind Farms

    Giæver Tande, John Olav

    2003-07-01

    This article gives an overview of grid integration of wind farms with respect to impact on voltage quality and power system stability. The recommended procedure for assessing the impact of wind turbines on voltage quality in distribution grids is presented. The procedure uses the power quality characteristic data of wind turbines to determine the impact on slow voltage variations, flicker, voltage dips and harmonics. The detailed assessment allows for substantially more wind power in distribution grids compared with previously used rule-of-thumb guidelines. Power system stability is a concern in conjunction with large wind farms or very weak grids. Assessment requires the use of power system simulation tools, and wind farm models for inclusion in such tools are presently being developed. A fixed-speed wind turbine model is described. The model may be considered a good starting point for development of more advanced models, hereunder the concept of variable-speed wind turbines with a doubly fed induction generator is briefly explained. The use of dynamic wind farm models as part of power system simulation tools allows for detailed studies and development of innovative grid integration techniques. It is demonstrated that the use of reactive compensation may relax the short-term voltage stability limit and allow integration of significantly more wind power, and that application of automatic generation control technology may be an efficient means to circumvent thermal transmission capacity constraints. The continuous development of analysis tools and technology for cost-effective and secure grid integration is an important aid to ensure the increasing use of wind energy. A key factor for success, however, is the communication of results and gained experience, and in this regard it is hoped that this article may contribute.

  4. Overview of Grid Codes for Photovoltaic Integration

    Zheng, Qianwei; Li, Jiaming; Ai, Xiaomeng

    2017-01-01

    The increasing grid-connected photovoltaic (PV) power stations might threaten the safety and stability of power system. Therefore, the grid code is developed for PV power stations to ensure the security of PV integrated power systems. In this paper, requirements for PV power integration in differ...... in different grid codes are first investigated. On this basis, the future advocacy is concluded. Finally, several evaluation indices are proposed to quantify the grid code compliance so that the system operators can validate all these requirements by simulation....

  5. Distributed Grid Experiences in CMS DC04

    Fanfani, A; Grandi, C; Legrand, I; Suresh, S; Campana, S; Donno, F; Jank, W; Sinanis, N; Sciabà, A; García-Abia, P; Hernández, J; Ernst, M; Anzar, A; Fisk, I; Giacchetti, L; Graham, G; Heavey, A; Kaiser, J; Kuropatine, N; Perelmutov, T; Pordes, R; Ratnikova, N; Weigand, J; Wu, Y; Colling, D J; MacEvoy, B; Tallini, H; Wakefield, L; De Filippis, N; Donvito, G; Maggi, G; Bonacorsi, D; Dell'Agnello, L; Martelli, B; Biasotto, M; Fantinel, S; Corvo, M; Fanzago, F; Mazzucato, M; Tuura, L; Martin, T; Letts, J; Bockjoo, K; Prescott, C; Rodríguez, J; Zahn, A; Bradley, D

    2005-01-01

    In March-April 2004 the CMS experiment undertook a Data Challenge (DC04). During the previous 8 months CMS undertook a large simulated event production. The goal of the challenge was to run CMS reconstruction for sustained period at 25Hz in put rate, distribute the data to the CMS Tier-1 centers and analyze them at remote sites. Grid environments developed in Europe by the LHC Computing Grid (LCG) and in the US with Grid2003 were utilized to complete the aspects of the challenge. A description of the experiences, successes and lessons learned from both experiences with grid infrastructure is presented.

  6. Application Note: Power Grid Modeling With Xyce.

    Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.

  7. Smart grid business case for private homes

    Villefrance, Rasmus; Brandt, Jonas; Eriksen, Poul Svante

    2013-01-01

    We describe and consider how the potential of energy savings may drive the penetration of smart grid technology into private homes. We assess the sociological processes which lead to energy savings when the residents have access to smart grid technology. We propose a way to establish a cash flow...... from consumers via electrical distribution companies to smart grid technology providers on the Danish market. Finally, we assess the impact of such a business development on the society, as well as relating the penetration of smart grid technology in private homes to the societal goal of 100% renewable...

  8. Smart grid fundamentals of design and analysis

    Momoh, James

    2012-01-01

    The book is written as primer hand book for addressing the fundamentals of smart grid. It provides the working definition the functions, the design criteria and the tools and techniques and technology needed for building smart grid. The book is needed to provide a working guideline in the design, analysis and development of Smart Grid. It incorporates all the essential factors of Smart Grid appropriate for enabling the performance and capability of the power system. There are no comparable books which provide information on the how to of the design and analysis. The book prov.

  9. Gridded multibeam bathymetry of Baker Island, Pacific Remote Island Areas, Central Pacific

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry at 40m resolution surrounding Baker Island, within the Pacific Remote Island Areas - Central Pacific Ocean. Bottom coverage was achieved in depths...

  10. Gridded multibeam bathymetry of Howland Island, Pacific Remote Island Areas, Central Pacific

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry at 40m resolution surrounding Howland Island, within the Pacific Remote Island Areas - Central Pacific Ocean. Bottom coverage was achieved in...

  11. CRED 5m Gridded multibeam bathymetry of Guam Island, Guam U.S. Territory

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry shelf, bank and slope environments of Guam Island, Guam U.S. Territory. Bottom coverage was achieved in depths between 0 and -3532 meters but this...

  12. Gridded multibeam bathymetry of Rota Island, Commonwealth of the Northern Mariana Islands (CNMI)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry shelf, bank and slope environments of Rota Island, CNMI. Bottom coverage was achieved in depths between 0 and -1905 meters. The netCDF and Arc...

  13. Data security on the national fusion grid

    Burruss, Justine R.; Fredian, Tom W.; Thompson, Mary R.

    2005-01-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This work has led to the development of the US Fusion Grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large US fusion research facilities and with users both in the US and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER

  14. Security on the US Fusion Grid

    Burruss, Justin R.; Fredian, Tom W.; Thompson, Mary R.

    2005-01-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This work has led to the development of the US Fusion Grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large US fusion research facilities and with users both in the US and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER

  15. Security on the US Fusion Grid

    Burruss, Justin R.; Fredian, Tom W.; Thompson, Mary R.

    2005-06-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This work has led to the development of the US Fusion Grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large US fusion research facilities and with users both in the US and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER.

  16. Data security on the national fusion grid

    Burruss, Justine R.; Fredian, Tom W.; Thompson, Mary R.

    2005-06-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This work has led to the development of the US Fusion Grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large US fusion research facilities and with users both in the US and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER.

  17. Security on the US fusion grid

    Burruss, J.R.; Fredian, T.W.; Thompson, M.R.

    2006-01-01

    The National Fusion Collaboratory project is developing and deploying new distributed computing and remote collaboration technologies with the goal of advancing magnetic fusion energy research. This has led to the development of the U.S. fusion grid (FusionGrid), a computational grid composed of collaborative, compute, and data resources from the three large U.S. fusion research facilities and with users both in the U.S. and in Europe. Critical to the development of FusionGrid was the creation and deployment of technologies to ensure security in a heterogeneous environment. These solutions to the problems of authentication, authorization, data transfer, and secure data storage, as well as the lessons learned during the development of these solutions, may be applied outside of FusionGrid and scale to future computing infrastructures such as those for next-generation devices like ITER

  18. Mapping of grid faults and grid codes

    Iov, Florin; Hansen, A.D.; Sørensen, P.

    loads of wind turbines. The goal is also to clarify and define possible new directions in the certification process of power plant wind turbines, namely wind turbines, which participate actively in the stabilisation of power systems. Practical experience shows that there is a need...... challenges for the design of both the electrical system and the mechanical structure of wind turbines. An overview over the frequency of grid faults and the grid connection requirements in different relevant countries is done in this report. The most relevant study cases for the quantification of the loads......The present report is a part of the research project "Grid fault and design basis for wind turbine" supported by Energinet.dk through the grant PSO F&U 6319. The objective of this project is to investigate into the consequences of the new grid connection requirements for the fatigue and extreme...

  19. Mapping of grid faults and grid codes

    Iov, F.; Hansen, Anca Daniela; Sørensen, Poul Ejnar

    loads of wind turbines. The goal is also to clarify and define possible new directions in the certification process of power plant wind turbines, namely wind turbines, which participate actively in the stabilisation of power systems. Practical experience shows that there is a need...... challenges for the design of both the electrical system and the mechanical structure of wind turbines. An overview over the frequency of grid faults and the grid connection requirements in different relevant countries is done in this report. The most relevant study cases for the quantification of the loads......The present report is a part of the research project ''Grid fault and designbasis for wind turbine'' supported by Energinet.dk through the grant PSO F&U 6319. The objective of this project is to investigate into the consequences of the new grid connection requirements for the fatigue and extreme...

  20. Study of the integration of distributed generation systems in the grid: application in micro-grids

    Gaztanaga Arantzamendi, H.

    2006-12-01

    The present PhD deals with an original micro-grid concept and its application as a Renewable Energy Source's (RES) grid integration scheme. This micro-grid is composed of RES generators as well as support systems that incorporate additional functionalities in order to improve RES integration into the grid. According to this concept, two practical micro-grid applications have been studied in detail: a residential micro-grid and a wind farm supported by DFACTS systems (STATCOM and DVR). In both applications, the control structures which are implemented at different levels and applied to the different micro-grid elements have been developed, analyzed by means of off-line simulations and finally validated in real-time conditions with physical reduced-scale prototypes. (author)

  1. Smart Grid Information Clearinghouse (SGIC)

    Rahman, Saifur [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2014-08-31

    Since the Energy Independence and Security Act of 2007 was enacted, there has been a large number of websites that discusses smart grid and relevant information, including those from government, academia, industry, private sector and regulatory. These websites collect information independently. Therefore, smart grid information was quite scattered and dispersed. The objective of this work was to develop, populate, manage and maintain the public Smart Grid Information Clearinghouse (SGIC) web portal. The information in the SGIC website is comprehensive that includes smart grid information, research & development, demonstration projects, technical standards, costs & benefit analyses, business cases, legislation, policy & regulation, and other information on lesson learned and best practices. The content in the SGIC website is logically grouped to allow easily browse, search and sort. In addition to providing the browse and search feature, the SGIC web portal also allow users to share their smart grid information with others though our online content submission platform. The Clearinghouse web portal, therefore, serves as the first stop shop for smart grid information that collects smart grid information in a non-bias, non-promotional manner and can provide a missing link from information sources to end users and better serve users’ needs. The web portal is available at www.sgiclearinghouse.org. This report summarizes the work performed during the course of the project (September 2009 – August 2014). Section 2.0 lists SGIC Advisory Committee and User Group members. Section 3.0 discusses SGIC information architecture and web-based database application functionalities. Section 4.0 summarizes SGIC features and functionalities, including its search, browse and sort capabilities, web portal social networking, online content submission platform and security measures implemented. Section 5.0 discusses SGIC web portal contents, including smart grid 101, smart grid projects

  2. Recent developments in the area of insurance and indemnity coverage for transportation of radioactive materials in the United States of America

    Brown, O.F. II

    1993-01-01

    The 1988 statutory amendments retained the basic structure of the Price-Anderson insurance-indemnity system. A number of significant changes were advocated during the lengthy Congressional review process, but they were rejected. Thus, Price-Anderson remains an exemplary system for providing liability coverage for the risks of a potentially-hazardous nuclear activities. (J.P.N.)

  3. The CrossGrid project

    Kunze, M.

    2003-01-01

    There are many large-scale problems that require new approaches to computing, such as earth observation, environmental management, biomedicine, industrial and scientific modeling. The CrossGrid project addresses realistic problems in medicine, environmental protection, flood prediction, and physics analysis and is oriented towards specific end-users: Medical doctors, who could obtain new tools to help them to obtain correct diagnoses and to guide them during operations; industries, that could be advised on the best timing for some critical operations involving risk of pollution; flood crisis teams, that could predict the risk of a flood on the basis of historical records and actual hydrological and meteorological data; physicists, who could optimize the analysis of massive volumes of data distributed across countries and continents. Corresponding applications will be based on Grid technology and could be complex and difficult to use: the CrossGrid project aims at developing several tools that will make the Grid more friendly for average users. Portals for specific applications will be designed, that should allow for easy connection to the Grid, create a customized work environment, and provide users with all necessary information to get their job done

  4. Smart Grid Enabled EVSE

    None, None

    2015-01-12

    The combined team of GE Global Research, Federal Express, National Renewable Energy Laboratory, and Consolidated Edison has successfully achieved the established goals contained within the Department of Energy’s Smart Grid Capable Electric Vehicle Supply Equipment funding opportunity. The final program product, shown charging two vehicles in Figure 1, reduces by nearly 50% the total installed system cost of the electric vehicle supply equipment (EVSE) as well as enabling a host of new Smart Grid enabled features. These include bi-directional communications, load control, utility message exchange and transaction management information. Using the new charging system, Utilities or energy service providers will now be able to monitor transportation related electrical loads on their distribution networks, send load control commands or preferences to individual systems, and then see measured responses. Installation owners will be able to authorize usage of the stations, monitor operations, and optimally control their electricity consumption. These features and cost reductions have been developed through a total system design solution.

  5. Cloud vector mapping using MODIS 09 Climate Modeling Grid (CMG) for the year 2010 and 2011

    Jah, Asjad Asif; Farrukh, Yousaf Bin; Ali, Rao Muhammad Saeed

    2013-01-01

    An alternate use for MODIS images was sought by mapping cloud movement directions and dissipation time during the 2010 and 2011 floods. MODIS Level-02 daily CMG (Climate Modelling Grid) land-cover images were downloaded and subsequently rectified and clipped to the study area. These images were then put together to observe the direction of cloud movement and vectorize the observed paths. Initial findings suggest that usually cloud does not have a prolonged coverage period over the northern humid region of the country and dissipates within less than 24-hours. Additionally, this led to the development of a robust methodology for cloud motion analysis using FOSS and market leading GIS utilities

  6. Large scale development of wind power. Consequences for the national grid and the need for load balancing; Storskalig utbyggnad av vindkraft. Konsekvenser foer stamnaetet och behovet av reglerkraft

    2008-06-15

    Wind power is expected to growth rapidly in Sweden. The existing certificate system gives economic incentives for development of 17 TWh from renewable energy sources until 2016, compared to the 2002 level. The Swedish Energy Agency estimates that 9 TWh wind power will be built by 2020, given the present certificate system. However, a new planning goal of 30 TWh wind energy by 2020 has been proposed by the Agency. It is very important for Svenska Kraftnaet to follow the development in order to take the right actions to adapt the national grid to the increased share of wind power. The total increased need for balancing power is estimated to be: 1 400-1 800 MW for 10 TWh added wind power, and 4 300-5 300 MW for 30 TWh. About 15% of the increased balancing need must be assigned to automatically frequency regulating generation. The rest can be made up of sources that can be regulated on a minute- or hour-scale. The planned wind power risks to replace generation with regulating capacity, and it is important to continuously analyze if and how this happens, and which the consequences will be for the balancing capacity. The socio-economic effects for the national grid include increased investment cost and increased costs foe balancing and regulating. Massive expansion in North Sweden is the most costly alternative, with a capitalized cost estimated to 25 000 MSEK (about 4 000 MUSD) at an expansion of 30 TWh wind power. This can be compared to the estimated investment cost for the wind power expansion of 150 000 MSEK

  7. Grid Technology and Quality Assurance

    Rippa, A.; Manieri, A.; Begin, M.E.; Di Meglio, A.

    2007-01-01

    Grid is one of the potential architectures of the coming years to support both the research and the commercial environment. Quality assurance techniques need both to adapt to these new architectures and exploit them to improve its effectiveness. Software quality is a key issue in the Digital Era: Industries as well as Public Administrations devote time to check and verify the quality of ICT products and services supplied. The definition of automatic measurement of quality metrics is a key point for implementing effective QA methods. In this paper we propose a quality certification model, named Grid-based Quality Certification Model (GQCM), that uses automatically calculable metrics to asses the quality of software applications; this model has been developed within the ETICS SSA4 activities and exploit grid technology for full automation of metrics calculation. It is however designed to be generic enough such that it can be implemented using any automatic build and test tool. (Author)

  8. A roadmap for caGrid, an enterprise Grid architecture for biomedical research.

    Saltz, Joel; Hastings, Shannon; Langella, Stephen; Oster, Scott; Kurc, Tahsin; Payne, Philip; Ferreira, Renato; Plale, Beth; Goble, Carole; Ervin, David; Sharma, Ashish; Pan, Tony; Permar, Justin; Brezany, Peter; Siebenlist, Frank; Madduri, Ravi; Foster, Ian; Shanbhag, Krishnakant; Mead, Charlie; Chue Hong, Neil

    2008-01-01

    caGrid is a middleware system which combines the Grid computing, the service oriented architecture, and the model driven architecture paradigms to support development of interoperable data and analytical resources and federation of such resources in a Grid environment. The functionality provided by caGrid is an essential and integral component of the cancer Biomedical Informatics Grid (caBIG) program. This program is established by the National Cancer Institute as a nationwide effort to develop enabling informatics technologies for collaborative, multi-institutional biomedical research with the overarching goal of accelerating translational cancer research. Although the main application domain for caGrid is cancer research, the infrastructure provides a generic framework that can be employed in other biomedical research and healthcare domains. The development of caGrid is an ongoing effort, adding new functionality and improvements based on feedback and use cases from the community. This paper provides an overview of potential future architecture and tooling directions and areas of improvement for caGrid and caGrid-like systems. This summary is based on discussions at a roadmap workshop held in February with participants from biomedical research, Grid computing, and high performance computing communities.

  9. Grid-group cultural theory: an introduction

    Mamadouh, V.

    1999-01-01

    This article offers an introduction to grid-group cultural theory (also known as grid-group analysis, Cultural Theory or theory of socio-cultural viability), an approach that has been developed over the past thirty years in the work of the British anthropologists Mary Douglas and Michael Thompson,

  10. The social dynamics of smart grids

    Naus, Joeri

    2017-01-01

    In international climate and energy policy the development of smart grids features as a critical new step in the transition towards a sustainable energy future. Smart grids enable two-way energy and information exchange between households and energy providers. Drawing on social practice theories,

  11. Middleware for the next generation Grid infrastructure

    Laure, E; Prelz, F; Beco, S; Fisher, S; Livny, M; Guy, L; Barroso, M; Buncic, P; Kunszt, Peter Z; Di Meglio, A; Aimar, A; Edlund, A; Groep, D; Pacini, F; Sgaravatto, M; Mulmo, O

    2005-01-01

    The aim of the EGEE (Enabling Grids for E-Science in Europe) project is to create a reliable and dependable European Grid infrastructure for e-Science. The objective of the EGEE Middleware Re-engineering and Integration Research Activity is to provide robust middleware components, deployable on several platforms and operating systems, corresponding to the core Grid services for resource access, data management, information collection, authentication & authorization, resource matchmaking and brokering, and monitoring and accounting. For achieving this objective, we developed an architecture and design of the next generation Grid middleware leveraging experiences and existing components essentially from AliEn, EDG, and VDT. The architecture follows the service breakdown developed by the LCG ARDA group. Our strategy is to do as little original development as possible but rather re-engineer and harden existing Grid services. The evolution of these middleware components towards a Service Oriented Architecture ...

  12. Conducted Electromagnetic Interference (EMI) in Smart Grids

    Smolenski, Robert

    2012-01-01

    As power systems develop to incorporate renewable energy sources, the delivery systems may be disrupted by the changes involved. The grid’s technology and management must be developed to form Smart Grids between consumers, suppliers and producers. Conducted Electromagnetic Interference (EMI) in Smart Grids considers the specific side effects related to electromagnetic interference (EMI) generated by the application of these Smart Grids. Conducted Electromagnetic Interference (EMI) in Smart Grids presents specific EMI conducted phenomena as well as effective methods to filter and handle them once identified. After introduction to Smart Grids, the following sections cover dedicated methods for EMI reduction and potential avenues for future development including chapters dedicated to: •potential system services, •descriptions of the EMI spectra shaping methods, •methods of interference voltage compensation, and theoretical analysis of experimental results.  By focusing on these key aspects, Conducted El...

  13. Smart grid security

    Cuellar, Jorge (ed.) [Siemens AG, Muenchen (Germany). Corporate Technology

    2013-11-01

    The engineering, deployment and security of the future smart grid will be an enormous project requiring the consensus of many stakeholders with different views on the security and privacy requirements, not to mention methods and solutions. The fragmentation of research agendas and proposed approaches or solutions for securing the future smart grid becomes apparent observing the results from different projects, standards, committees, etc, in different countries. The different approaches and views of the papers in this collection also witness this fragmentation. This book contains the following papers: 1. IT Security Architecture Approaches for Smart Metering and Smart Grid. 2. Smart Grid Information Exchange - Securing the Smart Grid from the Ground. 3. A Tool Set for the Evaluation of Security and Reliability in Smart Grids. 4. A Holistic View of Security and Privacy Issues in Smart Grids. 5. Hardware Security for Device Authentication in the Smart Grid. 6. Maintaining Privacy in Data Rich Demand Response Applications. 7. Data Protection in a Cloud-Enabled Smart Grid. 8. Formal Analysis of a Privacy-Preserving Billing Protocol. 9. Privacy in Smart Metering Ecosystems. 10. Energy rate at home Leveraging ZigBee to Enable Smart Grid in Residential Environment.

  14. A study of factors enhancing smart grid consumer engagement

    Park, Chan-Kook; Kim, Hyun-Jae; Kim, Yang-Soo

    2014-01-01

    It is important to ensure consumer acceptance in a smart grid since the ultimate deployment of the smart grid depends on the end users' acceptance of smart grid products and services such as smart meters and advanced metering services. We examine how residential consumers perceive the smart grid and what factors influence their acceptance of the smart grid through a survey for electricity consumers in Korea. In this study, consumers' smart grid acceptance factors, including the perceived risk, were examined with the existing technology acceptance model suggested by Davis. This study has an implication that it has provided theoretical and empirical ground, based on which the policies to promote consumer participation in the deployment of the smart grid can be developed. Since there are few studies on the policies from the perspective of the smart grid users, this study will contribute directly to the development of the strategy to ensure the acceptance of the smart grid. - Highlights: • We examine what factors influence electricity consumers' smart grid acceptance. • We test the smart grid technology acceptance model including the perceived risk as a main factor. • The importance of consumer education and public relations of the smart grid has been confirmed. • Another shortcut to ensure the acceptance of the smart grid is to mitigate the anxiety about the risk in the use of the smart grid

  15. Mechanical test for fuel assembly spacer grid

    Kang, Heung Seok; Jeong, Yeon Ho; Song, Kee Nam; Kim, Hyung Kyu; Yoon, Kyung Ho; Bang, Je Keun.

    1997-06-01

    In order to propose some tests for a new spacer grid, the grid mechanical tests performed by ABB-CE, KWU and Westinghouse have been investigated. It is known that a static compression test, a dynamic impact test, and a grid spring characteristic test were commonly carried out by the vendors when a prototype spacer grid was developed. The static compression test is to measure the stresses on the strips as well as to obtain the grid stiffness. The dynamic impact test is to get some basic data for accident analysis such as impact stiffness, impact strength, and coefficient of restitution. Since each fuel vendor has his theory on an accident analysis, every vendor employs his particular method for the dynamic impact test. The dynamic impact test can be divided into two in accordance with the number of impact face, and the duration of impact pulse. One is an one-sided impact test and the other is an through-gird impact test. The duration of the impact pulse for the former is considerably shorter than the latter. Therefore, the grid can endure much higher load under the one-sided impact condition than under the through-grid impact condition. The grid spring characteristic test is to obtain a force versus deflection curve. This curve is very important in designing the spacer grid to provide fuel rods with a sound supports in core. (author). 18 tabs., 26 figs

  16. Interim Report by Asia International Grid Connection Study Group

    Omatsu, Ryo

    2018-01-01

    The Asia International Grid Connection Study Group Interim Report examines the feasibility of developing an international grid connection in Japan. The Group has investigated different cases of grid connections in Europe and conducted research on electricity markets in Northeast Asia, and identifies the barriers and challenges for developing an international grid network including Japan. This presentation introduces basic contents of the interim report by the Study Group.

  17. Investigating the impact of unanticipated market and construction delays on the development of a meshed HVDC grid using dynamic transmission planning

    Shariat Torbaghan, S.; Gibescu, M.; Rawn, B.G.; Müller, H.; Roggenkamp, M.; vd Meijden, M.A.M.M.

    2015-01-01

    This study presents a market-based dynamic transmission planning framework for the construction of a meshed offshore voltage source converter-high voltage direct current (VSC-HVDC) grid. Such a grid is foreseen for integrating offshore wind and electricity trade functions among the North Sea

  18. Towards Efficient Energy Management: Defining HEMS and Smart Grid Objectives

    Rossello Busquet, Ana; Soler, José

    2011-01-01

    in home environments, researches have been designing Home Energy Management Systems (HEMS). Efficiently managing and distributing electricity in the grid will also help to reduce the increase of energy consumption in the future. The power grid is evolving into the Smart Grid, which is being developed...... to distribute and produce electricity more efficiently. This paper presents the high level goals and requirements of HEMS and the Smart Grid. Additionally, it provides an overview on how Information and Communication Technologies (ICT) is involved in the Smart Grid and how they help to achieve the emerging...... functionalities that the Smart Grid can provide....

  19. Coverage and development of specialist palliative care services across the World Health Organization European Region (2005-2012): Results from a European Association for Palliative Care Task Force survey of 53 Countries.

    Centeno, Carlos; Lynch, Thomas; Garralda, Eduardo; Carrasco, José Miguel; Guillen-Grima, Francisco; Clark, David

    2016-04-01

    The evolution of the provision of palliative care specialised services is important for planning and evaluation. To examine the development between 2005 and 2012 of three specialised palliative care services across the World Health Organization European Region - home care teams, hospital support teams and inpatient palliative care services. Data were extracted and analysed from two editions of the European Association for Palliative Care Atlas of Palliative Care in Europe. Significant development of each type of services was demonstrated by adjusted residual analysis, ratio of services per population and 2012 coverage (relationship between provision of available services and demand services estimated to meet the palliative care needs of a population). For the measurement of palliative care coverage, we used European Association for Palliative Care White Paper recommendations: one home care team per 100,000 inhabitants, one hospital support team per 200,000 inhabitants and one inpatient palliative care service per 200,000 inhabitants. To estimate evolution at the supranational level, mean comparison between years and European sub-regions is presented. Of 53 countries, 46 (87%) provided data. Europe has developed significant home care team, inpatient palliative care service and hospital support team in 2005-2012. The improvement was statistically significant for Western European countries, but not for Central and Eastern countries. Significant development in at least a type of services was in 21 of 46 (46%) countries. The estimations of 2012 coverage for inpatient palliative care service, home care team and hospital support team are 62%, 52% and 31% for Western European and 20%, 14% and 3% for Central and Eastern, respectively. Although there has been a positive development in overall palliative care coverage in Europe between 2005 and 2012, the services available in most countries are still insufficient to meet the palliative care needs of the population. © The

  20. High density grids

    Cohen, Aina E.; Baxter, Elizabeth L.

    2018-01-16

    An X-ray data collection grid device is provided that includes a magnetic base that is compatible with robotic sample mounting systems used at synchrotron beamlines, a grid element fixedly attached to the magnetic base, where the grid element includes at least one sealable sample window disposed through a planar synchrotron-compatible material, where the planar synchrotron-compatible material includes at least one automated X-ray positioning and fluid handling robot fiducial mark.

  1. HVDC grids for offshore and supergrid of the future

    Gomis-Bellmunt, Oriol; Liang, Jun

    2016-01-01

    Presents the advantages, challenges, and technologies of High Voltage Direct Current (HVDC) Grids This book discusses HVDC grids based on multi-terminal voltage-source converters (VSC), which is suitable for the connection of offshore wind farms and a possible solution for a continent wide overlay grid. HVDC Grids: For Offshore and Supergrid of the Future begins by introducing and analyzing the motivations and energy policy drives for developing offshore grids and the European Supergrid. HVDC transmission technology and offshore equipment are described in the second part of the book. The third part of the book discusses how HVDC grids can be developed and integrated in the existing power system. The fourth part of the book focuses on HVDC grid integration, in studies, for different time domains of electric power systems. The book concludes by discussing developments of advanced control methods and control devices for enabling DC grids.

  2. Micro grids toward the smart grid

    Guerrero, J.

    2011-01-01

    Worldwide electrical grids are expecting to become smarter in the near future, with interest in Microgrids likely to grow. A microgrid can be defined as a part of the grid with elements of prime energy movers, power electronics converters, distributed energy storage systems and local loads, that can operate autonomously but also interacting with main grid. Thus, the ability of intelligent Microgrids to operate in island mode or connected to the grid will be a keypoint to cope with new functionalities and the integration of renewable energy resources. The functionalities expected for these small grids are: black start operation, frequency and voltage stability, active and reactive power flow control, active power filter capabilities, and storage energy management. In this presentation, a review of the main concepts related to flexible Microgrids will be introduced, with examples of real Microgrids. AC and DC Microgrids to integrate renewable and distributed energy resources will also be presented, as well as distributed energy storage systems, and standardization issues of these Microgrids. Finally, Microgrid hierarchical control will be analyzed looking at three different levels: i) a primary control based on the droop method, including an output impedance virtual loop; ii) a secondary control, which enables restoring any deviations produced by the primary control; and iii) a tertiary control to manage the power flow between the microgrid and the external electrical distribution system.

  3. A principled approach to grid middleware

    Berthold, Jost; Bardino, Jonas; Vinter, Brian

    2011-01-01

    This paper provides an overview of MiG, a Grid middleware for advanced job execution, data storage and group collaboration in an integrated, yet lightweight solution using standard software. In contrast to most other Grid middlewares, MiG is developed with a particular focus on usability and mini......This paper provides an overview of MiG, a Grid middleware for advanced job execution, data storage and group collaboration in an integrated, yet lightweight solution using standard software. In contrast to most other Grid middlewares, MiG is developed with a particular focus on usability...... and minimal system requirements, applying strict principles to keep the middleware free of legacy burdens and overly complicated design. We provide an overview of MiG and describe its features in view of the Grid vision and its relation to more recent cloud computing trends....

  4. 5 m Gridded multibeam bathymetry of Rota Island, Commonwealth of the Northern Mariana Islands (CNMI)

    National Oceanic and Atmospheric Administration, Department of Commerce — Rota Island, CNMI. Bottom coverage was achieved in depths between 0 and -1905 meters; this 5-m grid has data only to -400 m. The netCDF and Arc ASCII grids include...

  5. A Generic Danish Distribution Grid Model for Smart Grid Technology Testing

    Cha, Seung-Tae; Wu, Qiuwei; Østergaard, Jacob

    2012-01-01

    This paper describes the development of a generic Danish distribution grid model for smart grid technology testing based on the Bornholm power system. The frequency dependent network equivalent (FDNE) method has been used in order to accurately preserve the desired properties and characteristics...... as a generic Smart Grid benchmark model for testing purposes....... by comparing the transient response of the original Bornholm power system model and the developed generic model under significant fault conditions. The results clearly show that the equivalent generic distribution grid model retains the dynamic characteristics of the original system, and can be used...

  6. Challenges facing production grids

    Pordes, Ruth; /Fermilab

    2007-06-01

    Today's global communities of users expect quality of service from distributed Grid systems equivalent to that their local data centers. This must be coupled to ubiquitous access to the ensemble of processing and storage resources across multiple Grid infrastructures. We are still facing significant challenges in meeting these expectations, especially in the underlying security, a sustainable and successful economic model, and smoothing the boundaries between administrative and technical domains. Using the Open Science Grid as an example, I examine the status and challenges of Grids operating in production today.

  7. Medgrid: a major industrial initiative for Mediterranean power grids - Opening new electricity paths for a sustainable energy development of the Union for the Mediterranean area countries

    Merlin, Andre; Pouliquen, Herve

    2011-01-01

    The development of new electricity networks in the Mediterranean region has given rise to a lot of new hope. Electricity is truly at the heart of economic and social development, but also represents an appropriate solution for improving the energy efficiency of many end use applications and for increasing the environmental protection where it is produced from renewable forms of energy. Launched under the framework of Union for the Mediterranean, a key project of the Mediterranean Solar Plan, Medgrid was set up at the instigation of the French government; it now gathers twenty industrial shareholders from different economic sectors: power generation, transmission, distribution and supply, financing and the sustainable development service industry, who are joining together to study the feasibility of a large transmission grid between the south and north rims of the Mediterranean Sea. Medgrid forms part of a new dynamic - set in motion over ten years ago - in Euro-Mediterranean relations, in environmental initiatives and in energy infrastructure development policies. It is important to be reminded of the main features of these initiatives and of their results in order to fully understand the huge diversity of the context in which Medgrid is going to operate, be it in the political, institutional, economic, industrial and technological spheres. (authors)

  8. Smart Solar Grid. Integration of high penetration of photovoltaic in municipal low voltage distribution grids; Smart Solar Grid. Integration hoher Anteile von Photovoltaik in kommunalen Niederspannungsverteilnetzen

    Ruf, Holger; Heilscher, Gerd [Hochschule Ulm (Germany); Meier, Florian [SWU Netze GmbH, Ulm (Germany)

    2012-07-01

    The high rate of decentralized generation in low voltage grids especially photovoltaic (PV) put the distribution grid operators to new challenges. Grid operation and grid planning have to respect the volatility and dynamic of decentralized generation now and in the future and adapt their previous proceedings. In the frame of the project Smart Solar Grid was a test site defined in the grid area of the DSO Stadtwerke Ulm/Neu-Ulm GmbH (SWU) to analyze the impact of the PV rise and possible solutions for the grid planning in the future. The first analysis based upon secondly measurements of the first test site. From this were statistical evaluation of the load flows and power variations done. Furthermore were the roof potential analysis results of the test site validated. These data are the base for the development of a forecast system for grid condition parameter. (orig.)

  9. 24 CFR 51.302 - Coverage.

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Coverage. 51.302 Section 51.302 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development... significantly prolongs the physical or economic life of existing facilities or which, in the case of Accident...

  10. Vehicle to Grid Demonstration Project

    Willett Kempton; Meryl Gardner; Michael Hidrue; Fouad Kamilev; Sachin Kamboj; Jon Lilley; Rodney McGee; George Parsons; Nat Pearre; Keith Trnka

    2010-12-31

    This report summarizes the activities and accomplishments of a two-year DOE-funded project on Grid-Integrated Vehicles (GIV) with vehicle to grid power (V2G). The project included several research and development components: an analysis of US driving patterns; an analysis of the market for EVs and V2G-capable EVs; development and testing of GIV components (in-car and in-EVSE); interconnect law and policy; and development and filing of patents. In addition, development activities included GIV manufacturing and licensing of technologies developed under this grant. Also, five vehicles were built and deployed, four for the fleet of the State of Delaware, plus one for the University of Delaware fleet.

  11. Replica consistency in a Data Grid

    Domenici, Andrea; Donno, Flavia; Pucciani, Gianni; Stockinger, Heinz; Stockinger, Kurt

    2004-01-01

    A Data Grid is a wide area computing infrastructure that employs Grid technologies to provide storage capacity and processing power to applications that handle very large quantities of data. Data Grids rely on data replication to achieve better performance and reliability by storing copies of data sets on different Grid nodes. When a data set can be modified by applications, the problem of maintaining consistency among existing copies arises. The consistency problem also concerns metadata, i.e., additional information about application data sets such as indices, directories, or catalogues. This kind of metadata is used both by the applications and by the Grid middleware to manage the data. For instance, the Replica Management Service (the Grid middleware component that controls data replication) uses catalogues to find the replicas of each data set. Such catalogues can also be replicated and their consistency is crucial to the correct operation of the Grid. Therefore, metadata consistency generally poses stricter requirements than data consistency. In this paper we report on the development of a Replica Consistency Service based on the middleware mainly developed by the European Data Grid Project. The paper summarises the main issues in the replica consistency problem, and lays out a high-level architectural design for a Replica Consistency Service. Finally, results from simulations of different consistency models are presented

  12. Water Quality Research Program: Development of Unstructured Grid Linkage Methodology and Software for CE-QUAL-ICM

    Chapman, Raymond

    1997-01-01

    This study was conducted for the purpose of developing a methodology and associated software for linking hydrodynamic output from the RMAlO finite element model to the CE-QUAL-ICM finite volume water quality model...

  13. Interoperability and HealthGRID.

    Bescos, C; Schmitt, D; Kass, J; García-Barbero, M; Kantchev, P

    2005-01-01

    GRID technology, with initiatives like the GGF, will have the potential to allow both competition and interoperability not only among applications and toolkits, but also among implementations of key services. The pyramid of eHealth interoperability should be achieved from standards in communication and data security, storage and processing, to the policy initiatives, including organizational protocols, financing procedures, and legal framework. The open challenges for GRID use in clinical fields illustrate the potential of the combination of grid technologies with medical routine into a wider interoperable framework. The Telemedicine Alliance is a consortium (ESA, WHO and ITU), initiated in 2002, in building a vision for the provision of eHealth to European citizens by 2010. After a survey with more that 50 interviews of experts, interoperability was identified as the main showstopper to eHealth implementation. There are already several groups and organizations contributing to standardization. TM-Alliance is supporting the "e-Health Standardization Coordination Group" (eHSCG). It is now, in the design and development phase of GRID technology in Health, the right moment to act with the aim of achieving an interoperable and open framework. The Health area should benefit from the initiatives started at the GGF in terms of global architecture and services definitions, as well as from the security and other web services applications developed under the Internet umbrella. There is a risk that existing important results of the standardization efforts in this area are not taken up simply because they are not always known.

  14. Japan. Superconductivity for Smart Grids

    Hayakawa, K.

    2012-11-15

    Currently, many smart grid projects are running or planned worldwide. These aim at controlling the electricity supply more efficiently and more stably in a new power network system. In Japan, especially superconductivity technology development projects are carried out to contribute to the future smart grid. Japanese cable makers such as Sumitomo Electric and Furukawa Electric are leading in the production of high-temperature superconducting (HTS) power cables. The world's largest electric current and highest voltage superconductivity proving tests have been started this year. Big cities such as Tokyo will be expected to introduce the HTS power cables to reduce transport losses and to meet the increased electricity demand in the near future. Superconducting devices, HTS power cables, Superconducting Magnetic Energy Storage (SMES) and flywheels are the focus of new developments in cooperations between companies, universities and research institutes, funded by the Japanese research and development funding organization New Energy and Industrial Technology Development Organization (NEDO)

  15. Microgrid Central Controller Development and Hierarchical Control Implementation in the Intelligent MicroGrid Lab of Aalborg University

    Meng, Lexuan; Savaghebi, Mehdi; Andrade, Fabio

    2015-01-01

    This paper presents the development of a microgrid central controller in an inverter-based intelligent microgrid (iMG) lab in Aalborg University, Denmark. The iMG lab aims to provide a flexible experimental platform for comprehensive studies of microgrids. The complete control system applied...... in this lab is based on the hierarchical control scheme for microgrids and includes primary, secondary and tertiary control. The structure of the lab, including the lab facilities, configurations and communication network, is first introduced. Primary control loops are developed in MATLAB....../Simulink and compiled to dSPACEs for local control purposes. In order to realize system supervision and proper secondary and tertiary management, a LabVIEW-based microgrid central controller is also developed. The software and hardware schemes are described. An example case is introduced and tested in the iMG lab...

  16. GridOrbit public display

    Ramos, Juan David Hincapie; Tabard, Aurélien; Bardram, Jakob

    2010-01-01

    We introduce GridOrbit, a public awareness display that visualizes the activity of a community grid used in a biology laboratory. This community grid executes bioin-formatics algorithms and relies on users to donate CPU cycles to the grid. The goal of GridOrbit is to create a shared awareness about...

  17. Security for grids

    Humphrey, Marty; Thompson, Mary R.; Jackson, Keith R.

    2005-08-14

    Securing a Grid environment presents a distinctive set of challenges. This paper groups the activities that need to be secured into four categories: naming and authentication; secure communication; trust, policy, and authorization; and enforcement of access control. It examines the current state of the art in securing these processes and introduces new technologies that promise to meet the security requirements of Grids more completely.

  18. The LHCb Grid Simulation

    Baranov, Alexander

    2016-01-01

    The LHCb Grid access if based on the LHCbDirac system. It provides access to data and computational resources to researchers with different geographical locations. The Grid has a hierarchical topology with multiple sites distributed over the world. The sites differ from each other by their number of CPUs, amount of disk storage and connection bandwidth. These parameters are essential for the Grid work. Moreover, job scheduling and data distribution strategy have a great impact on the grid performance. However, it is hard to choose an appropriate algorithm and strategies as they need a lot of time to be tested on the real grid. In this study, we describe the LHCb Grid simulator. The simulator reproduces the LHCb Grid structure with its sites and their number of CPUs, amount of disk storage and bandwidth connection. We demonstrate how well the simulator reproduces the grid work, show its advantages and limitations. We show how well the simulator reproduces job scheduling and network anomalies, consider methods ...

  19. The play grid

    Fogh, Rune; Johansen, Asger

    2013-01-01

    In this paper we propose The Play Grid, a model for systemizing different play types. The approach is psychological by nature and the actual Play Grid is based, therefore, on two pairs of fundamental and widely acknowledged distinguishing characteristics of the ego, namely: extraversion vs. intro...

  20. Planning in Smart Grids

    Bosman, M.G.C.

    2012-01-01

    The electricity supply chain is changing, due to increasing awareness for sustainability and an improved energy efficiency. The traditional infrastructure where demand is supplied by centralized generation is subject to a transition towards a Smart Grid. In this Smart Grid, sustainable generation

  1. 78 FR 9678 - Multi-stakeholder Process To Develop a Voluntary Code of Conduct for Smart Grid Data Privacy

    2013-02-11

    ... providing consumer energy use services. DATES: Tuesday, February 26, 2013 (9:30 a.m. to 4:30 p.m., Eastern... Privacy and Promoting Innovation in the Global Digital Economy \\2\\ (Privacy Blueprint). The Privacy Blueprint outlines a multi-stakeholder process for developing voluntary codes of conduct that, if adopted by...

  2. Southern California Edison Grid Integration Evaluation: Cooperative Research and Development Final Report, CRADA Number CRD-10-376

    Mather, Barry [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-07-09

    The objective of this project is to use field verification to improve DOE’s ability to model and understand the impacts of, as well as develop solutions for, high penetration PV deployments in electrical utility distribution systems. The Participant will work with NREL to assess the existing distribution system at SCE facilities and assess adding additional PV systems into the electric power system.

  3. Gridded Species Distribution, Version 1: Global Amphibians Presence Grids

    National Aeronautics and Space Administration — The Global Amphibians Presence Grids of the Gridded Species Distribution, Version 1 is a reclassified version of the original grids of amphibian species distribution...

  4. A pressure drop model for PWR grids

    Oh, Dong Seok; In, Wang Ki; Bang, Je Geon; Jung, Youn Ho; Chun, Tae Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-12-31

    A pressure drop model for the PWR grids with and without mixing device is proposed at single phase based on the fluid mechanistic approach. Total pressure loss is expressed in additive way for form and frictional losses. The general friction factor correlations and form drag coefficients available in the open literatures are used to the model. As the results, the model shows better predictions than the existing ones for the non-mixing grids, and reasonable agreements with the available experimental data for mixing grids. Therefore it is concluded that the proposed model for pressure drop can provide sufficiently good approximation for grid optimization and design calculation in advanced grid development. 7 refs., 3 figs., 3 tabs. (Author)

  5. A pressure drop model for PWR grids

    Oh, Dong Seok; In, Wang Ki; Bang, Je Geon; Jung, Youn Ho; Chun, Tae Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    A pressure drop model for the PWR grids with and without mixing device is proposed at single phase based on the fluid mechanistic approach. Total pressure loss is expressed in additive way for form and frictional losses. The general friction factor correlations and form drag coefficients available in the open literatures are used to the model. As the results, the model shows better predictions than the existing ones for the non-mixing grids, and reasonable agreements with the available experimental data for mixing grids. Therefore it is concluded that the proposed model for pressure drop can provide sufficiently good approximation for grid optimization and design calculation in advanced grid development. 7 refs., 3 figs., 3 tabs. (Author)

  6. Renewable Electricity-to-Grid Integration | Energy Systems Integration

    Facility | NREL Renewable Electricity-to-Grid Integration Renewable Electricity-to-Grid Integration NREL works with industry partners to optimize strategies for effectively interconnecting renewable renewable electric grid integration work includes research and development (R&D) on advanced inverters

  7. A compact active grid for stirring pipe flow

    Verbeek, A.A.; Pos, R.C.; Stoffels, G.G.M.; Geurts, B.J.; Meer, van der Th.

    2013-01-01

    A compact active grid is developed with which a pipe flow can be stirred in order to enhance the turbulence. The active grid is composed of a stationary and a rotating disk with characteristic hole patterns. This active grid is placed inside the pipe, allowing flow to pass through it. With only one

  8. A compact active grid for stirring pipe flow

    Verbeek, Antonie Alex; Pos, R.C.; Stoffels, Genie G.M.; Geurts, Bernardus J.; van der Meer, Theodorus H.

    A compact active grid is developed with which a pipe flow can be stirred in order to enhance the turbulence. The active grid is composed of a stationary and a rotating disk with characteristic hole patterns. This active grid is placed inside the pipe, allowing flow to pass through it. With only one

  9. Economics of Wind Power when National Grids are Unreliable

    Kooten, van G.C.; Wong, L.

    2010-01-01

    Power interruptions are a typical characteristic of national grids in developing countries. Manufacturing, processing, refrigeration and other facilities that require a dependable supply of power, and might be considered a small grid within the larger national grid, employ diesel generators for

  10. REVIEW ON GRID INTERFACING OF MULTIMEGAWATT PHOTOVOLTAIC INVERTERS

    Mr. Vilas S. Solanke*; Mr. Naveen Kumar

    2016-01-01

    This paper presents review on the latest development of control of grid connected photovoltaic energy conversion system. Also this paper present existing systems control algorithm for three-phase and single phase grid-connected photovoltaic (PV) system. This paper focuses on one aspect of solar energy, namely grid interfacing of large-scale PV farms. This Grid-connected photovoltaic i.e. PV systems can provide a number of benefits to electric utilities, such as power loss reduction, improve...

  11. The GRID seminar

    CERN. Geneva HR-RFA

    2006-01-01

    The Grid infrastructure is a key part of the computing environment for the simulation, processing and analysis of the data of the LHC experiments. These experiments depend on the availability of a worldwide Grid infrastructure in several aspects of their computing model. The Grid middleware will hide much of the complexity of this environment to the user, organizing all the resources in a coherent virtual computer center. The general description of the elements of the Grid, their interconnections and their use by the experiments will be exposed in this talk. The computational and storage capability of the Grid is attracting other research communities beyond the high energy physics. Examples of these applications will be also exposed during the presentation.

  12. Grid computing in high-energy physics

    Bischof, R.; Kuhn, D.; Kneringer, E.

    2003-01-01

    Full text: The future high energy physics experiments are characterized by an enormous amount of data delivered by the large detectors presently under construction e.g. at the Large Hadron Collider and by a large number of scientists (several thousands) requiring simultaneous access to the resulting experimental data. Since it seems unrealistic to provide the necessary computing and storage resources at one single place, (e.g. CERN), the concept of grid computing i.e. the use of distributed resources, will be chosen. The DataGrid project (under the leadership of CERN) develops, based on the Globus toolkit, the software necessary for computation and analysis of shared large-scale databases in a grid structure. The high energy physics group Innsbruck participates with several resources in the DataGrid test bed. In this presentation our experience as grid users and resource provider is summarized. In cooperation with the local IT-center (ZID) we installed a flexible grid system which uses PCs (at the moment 162) in student's labs during nights, weekends and holidays, which is especially used to compare different systems (local resource managers, other grid software e.g. from the Nordugrid project) and to supply a test bed for the future Austrian Grid (AGrid). (author)

  13. Smart Grid: Smart Customer Policy Needs

    NONE

    2011-07-01

    In September 2010, the International Energy Agency (IEA) held a workshop on the regulatory, market and consumer policies necessary to ensure that smart grids are deployed with adequate consideration of their risks and benefits to all stakeholders. This was one of several workshops that brought together energy providers, network operators, technology developers, regulators, customers and government policy makers to discuss smart grid technology and policy. The Smart Grid - Smart Customer Policies workshop allowed stakeholders to: gain a perspective on key issues and barriers facing early deployment of smart grids; hear expert opinion on regulatory, consumer and market challenges to smart grids; discuss smart grid-smart customer policy priorities; and build consensus on the technology and policy ingredients needed for customer-friendly smart grid deployments. Drawing on workshop discussions, the following paper lays out a logical framework to maximise the benefits and minimise the risks that smart grids pose for customers. The paper also describes key policy research questions that will guide future IEA research on this topic.

  14. European electricity grid. Status and perspective

    Maillard, Dominique

    2010-01-01

    There is no doubt about the need to expand and modernize the European electricity grid, especially in order to allow renewable energies to be fed stochastically into existing systems. As it is hardly possible at the present time and also in the near future to store electricity on a major scale and at adequate prices, electricity must be transmitted from the point of generation to the point of consumption directly and in real time. The development of grid systems, including cross-border transmission systems, is still behind expectations. This is not due to a shortage of projects or a lack of interest on the part of grid operators; the necessary political support is available as well, and investments at present are covered by the feed tariffs. The problem is the lack of acceptance. It is difficult to obtain new permits or commission new grids. This problem of the licensing authorities often results in considerable delays. Consequently, it is up to the grid operators to handle this situation and promote new, intelligent grid systems in an effort to achieve acceptance of a technical-scale infrastructure. This includes transparency in grid expansion, exchange with the public in order to reach mutual understanding and trust and also find compromises as well as the willingness to discuss various approaches to solutions (underground routing, upgrading of existing grid systems, smart systems, and intelligent designs) so as to optimize the use of the existing infrastructure. (orig.)

  15. Renewable energies and regional development. Photovoltaic energy, micro-grid systems in the Brazilian semi-arid

    Arrais de Miranda Mousinho, Maria Candida

    2012-07-01

    This article tackles the issue of the development related to the insertion of new renewable energy technologies. It also presents the experience of the region of the Sao Francisco River Valley - named after the largest river genuinely Brazilian located in the semi-arid region -, focusing mainly on two municipalities: Xique-Xique and Barra. Its focus is the use of solar energy for rural communities. To present the results of that experience, the support of the Rio Sao Francisco Project: culture, identity and development, of the Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) and of Eurosolar was essential. The research on which this article is based was fruit of a volunteer research project linked to the Partners of the Americas Bahia-Pennsylvania Committee.

  16. Comprehensive Evaluation of the Sustainable Development of Power Grid Enterprises Based on the Model of Fuzzy Group Ideal Point Method and Combination Weighting Method with Improved Group Order Relation Method and Entropy Weight Method

    Shuyu Dai

    2017-10-01

    Full Text Available As an important implementing body of the national energy strategy, grid enterprises bear the important responsibility of optimizing the allocation of energy resources and serving the economic and social development, and their levels of sustainable development have a direct impact on the national economy and social life. In this paper, the model of fuzzy group ideal point method and combination weighting method with improved group order relation method and entropy weight method is proposed to evaluate the sustainable development of power grid enterprises. Firstly, on the basis of consulting a large amount of literature, the important criteria of the comprehensive evaluation of the sustainable development of power grid enterprises are preliminarily selected. The opinions of the industry experts are consulted and fed back for many rounds through the Delphi method and the evaluation criteria system for sustainable development of power grid enterprises is determined, then doing the consistent and non dimensional processing of the evaluation criteria. After that, based on the basic order relation method, the weights of each expert judgment matrix are synthesized to construct the compound matter elements. By using matter element analysis, the subjective weights of the criteria are obtained. And entropy weight method is used to determine the objective weights of the preprocessed criteria. Then, combining the subjective and objective information with the combination weighting method based on the subjective and objective weighted attribute value consistency, a more comprehensive, reasonable and accurate combination weight is calculated. Finally, based on the traditional TOPSIS method, the triangular fuzzy numbers are introduced to better realize the scientific processing of the data information which is difficult to quantify, and the queuing indication value of each object and the ranking result are obtained. A numerical example is taken to prove that the

  17. Deliverable 1.1 Smart grid scenario

    Korman, Matus; Ekstedt, Mathias; Gehrke, Oliver

    2015-01-01

    The purpose of the SALVAGE project is to develop better support for managing and designing a secure future smart grid. This approach includes cyber security technologies dedicated to power grid operation as well as support for the migration to the future smart grid solutions, including the legacy...... of ICT that necessarily will be part of it. The objective is further to develop cyber security technology and methodology optimized with the particular needs and context of the power industry, something that is to a large extent lacking in general cyber security best practices and technologies today...

  18. A quantitative analysis of the mass media coverage of genomics medicine in China: a call for science journalism in the developing world.

    Zhao, Feifei; Chen, Yan; Ge, Siqi; Yu, Xinwei; Shao, Shuang; Black, Michael; Wang, Youxin; Zhang, Jie; Song, Manshu; Wang, Wei

    2014-04-01

    Science journalism is a previously neglected but rapidly growing area of scholarship in postgenomics medicine and socio-technical studies of knowledge-based innovations. Science journalism can help evaluate the quantity and quality of information flux between traditional scientific expert communities and the broader public, for example, in personalized medicine education. Newspapers can play a crucial role in science and health communication, and more importantly, in framing public engagement. However, research on the role of newspaper coverage of genomics-related articles has not been readily available in resource-limited settings. As genomics is rapidly expanding worldwide, this gap in newspaper reportage in China is therefore an important issue. In order to bridge this gap, we investigated the coverage of genomics medicine in eight major Chinese national newspapers, using the China Core Newspapers Full-text Database (CCND) and articles in scientific journals in PubMed from 2000 to 2011. Coverage of genomics medicine in these eight official government Chinese newspapers has remained low, with only 12 articles published per newspaper per year between 2000 and 2011. Between 2000 and 2011, over a 40-fold difference was observed in the number of genomics medicine-related articles in PubMed, as compared to that in newspapers. The numbers of genomics-related articles among the eight major newspapers from 2000 to 2011 were significantly different (p=0.001). Commentary/mini reviews and articles about gene therapy for specific diseases were most frequently published in 2006 and 2011. In parallel, we observed that "cancer gene therapy," "new susceptibility gene locus," and "gene technology revolution" were the top three thematic strands addressed in the newspapers, even though their volume remained low. This study reports on the under-representation of newspaper coverage of genomics medicine in China, despite the vast growth of scientific articles in journals in this

  19. Primer: Using Watershed Modeling System (WMS) for Gridded Surface Subsurface Hydrologic Analysis (GSSHA) Data Development - WMS 6.1 and GSSHA 1.43C

    Downer, Charles

    2003-01-01

    This document is a primer for use of the Watershed Modeling System (WMS) interface with the physically based, distributed-parameter hydrologic model Gridded Surface Subsurface Hydrologic Analysis (GSSHA...

  20. MrGrid: a portable grid based molecular replacement pipeline.

    Jason W Schmidberger

    Full Text Available BACKGROUND: The crystallographic determination of protein structures can be computationally demanding and for difficult cases can benefit from user-friendly interfaces to high-performance computing resources. Molecular replacement (MR is a popular protein crystallographic technique that exploits the structural similarity between proteins that share some sequence similarity. But the need to trial permutations of search models, space group symmetries and other parameters makes MR time- and labour-intensive. However, MR calculations are embarrassingly parallel and thus ideally suited to distributed computing. In order to address this problem we have developed MrGrid, web-based software that allows multiple MR calculations to be executed across a grid of networked computers, allowing high-throughput MR. METHODOLOGY/PRINCIPAL FINDINGS: MrGrid is a portable web based application written in Java/JSP and Ruby, and taking advantage of Apple Xgrid technology. Designed to interface with a user defined Xgrid resource the package manages the distribution of multiple MR runs to the available nodes on the Xgrid. We evaluated MrGrid using 10 different protein test cases on a network of 13 computers, and achieved an average speed up factor of 5.69. CONCLUSIONS: MrGrid enables the user to retrieve and manage the results of tens to hundreds of MR calculations quickly and via a single web interface, as well as broadening the range of strategies that can be attempted. This high-throughput approach allows parameter sweeps to be performed in parallel, improving the chances of MR success.

  1. Quattor: managing (complex) grid sites

    Jouvin, M

    2008-01-01

    Quattor is a tool developed to efficiently manage fabrics with hundreds or thousands of Linux machines, while still being able to manage smaller clusters easily. It was originally developed inside the European Data Grid (EDG) project and is now in use at more than 50 grid sites running gLite middleware, ranging from small LCG T3s to very large sites like CERN. Quattor's ability to factorize and to reuse common parts of service configurations permitted the development of the QWG templates: a complete set of standard templates to configure the OS and gLite middleware. Any site can just import and customize the configuration without editing the bulk of the templates. Collaboration around these templates results in a very efficient sharing of installation and configuration information between those sites using them

  2. Control of Grid Integrated Voltage Source Converters under Unbalanced Conditions: Development of an On-line Frequency-adaptive Virtual Flux-based Approach

    Suul, Jon Are

    2012-01-01

    Three-Phase Voltage Source Converters (VSCs) are finding widespread applications in grid integrated power conversion systems. The control systems of such VSCs are in an increasing number of these applications required to operate during voltage disturbances and unbalanced conditions. Control systems designed for grid side voltagesensor- less operation are at the same time becoming attractive due to the continuous drive for cost reduction and increased reliability of VSCs, but are not commonly ...

  3. Off-grid PV in developing countries is more than poverty mitigation. It is sound business sense

    Wiemann, Marcus [Alliance for Rural Electrification, Brussels (Belgium)

    2013-07-01

    One of the biggest challenges of rural electrification through renewables is getting people to see the bigger picture: we are not only helping African children who still do their homework by candlelight, there is also a growing market out there yet to be fully tapped by the private sector. It is the proverbial win-win situation. If private companies are willing to take a chance and invest on the extraordinary potential of these countries, there is no telling the proportions that the market might take. In the next few years, renewable energy can become both a formidable boost to Africa's economic development and the answer to the problem of energy access. (orig.)

  4. A comparison of recent developments in the energy grid industries in the USA and in Europe: the lessons for Europe

    Finon, D.

    1992-01-01

    A comparison of recent developments in the electricity and gas industries in the USA and Europe shows that competition is not a panacea in these industries. A central role should not be given to wholesale or retail spot markets in a doctrinaire, uniform way. The physical and technical realities of these industries (the non-storability of electric power, the difficulties of access to gas resources, the rigid infrastructures and the high capital intensity) must be taken into account in any critical examination of the 'common model' of (quasi-) vertical integration which seeks to establish suitable forms of competition. Of these two industries, it would seem that gas appears more suited to the incorporation of a certain amount of competition for the sake of greater efficiency. 11 refs

  5. Marketing strategy and action plan for the development of the Canadian off-grid photovoltaic market : fin al report

    NONE

    2001-09-01

    A study was conducted to address the following strategic issues regarding the market development of photovoltaics (PV) in Canada: (1) to which type of market should PV products and services be promoted, (2) what is the level of demand for the various PV applications, (3) what constitutes quality and value to the users, (4) what barriers exist with respect to the use of PV technology, (5) which applications and product areas should be emphasized in the development, (6) what would be the best pricing strategy, (7) what types of financial incentives should be offered, and (8) what would be an effective promotional strategy. Information was collected via telephone discussions and was then transferred to an electronic database. The types of market that were included in this survey were remote homes and cottages, telecommunications, broadcasting, parks, and the oil and gas industry. The findings of the key applications for each of these market sectors were then presented. The applications varied from back-up power systems for houses, main household power systems for water pumping, lights and telephones, power supply at construction sites, and power supply for camping. The types of units available include stand-alone PV systems as well as PV-hybrid generators including PV-gas, or PV-diesel. A majority of participants in the survey suggested they would be willing to trade their existing generators for a PV or PV-hybrid system if it were offered at a reasonable price. PV/PV-hybrid systems are reliable, technologically proven, environmentally friendly, and offer a cost-effective fuel supply. tabs., figs.

  6. Low-cost wireless voltage & current grid monitoring

    Hines, Jacqueline [SenSanna Inc., Arnold, MD (United States)

    2016-12-31

    This report describes the development and demonstration of a novel low-cost wireless power distribution line monitoring system. This system measures voltage, current, and relative phase on power lines of up to 35 kV-class. The line units operate without any batteries, and without harvesting energy from the power line. Thus, data on grid condition is provided even in outage conditions, when line current is zero. This enhances worker safety by detecting the presence of voltage and current that may appear from stray sources on nominally isolated lines. Availability of low-cost power line monitoring systems will enable widespread monitoring of the distribution grid. Real-time data on local grid operating conditions will enable grid operators to optimize grid operation, implement grid automation, and understand the impact of solar and other distributed sources on grid stability. The latter will enable utilities to implement eneygy storage and control systems to enable greater penetration of solar into the grid.

  7. A security architecture for the ALICE grid services

    Schreiner, Steffen; Buchmann, Johannes; Betev, Latchezar; Grigoras, Alina

    2012-01-01

    Globally distributed research cyberinfrastructures, like the ALICE Grid Services, need to provide traceability and accountability of operations and internal interactions. This document presents a new security architecture for the ALICE Grid Services, allowing to establish non-repudiation with respect to creatorship and ownership of Grid files and jobs. It is based on mutually authenticated and encrypted communication using X.509 Public Key Infrastructure and the Transport Layer Security (TLS) protocol. Introducing certified Grid file entries and signed Grid jobs by implementing a model of Mediated Definite Delegation it allows to establish long-term accountability concerning Grid jobs and files. Initial submissions as well as any alteration of Grid jobs are becoming verifiable and can be traced back to the originator. The architecture has been implemented as a prototype along with the development of a new central Grid middleware, called jAliEn.

  8. The Smart Grid Impact on the Danish DSOs’ Business Model

    Ma, Zheng; Sommer, Simon; Jørgensen, Bo Nørregaard

    2016-01-01

    The transformation progress of the smart grid challenges the market players' business models. One of those market players is the Distribution System Operators (DSOs). This paper aims to elaborate how smart grid influences the DSOs' business models with case studies of two Danish DSOs — Energi......Fyn and TREFOR. The main findings indicate that the Danish smart grid transformation process influences the Danish DSOs' business models via four smart grid related factors: (1) smart meters, (2) Distributed Energy Resources (DERs), (3) Bidirectional electricity flow, and (4) R&D. Therefore, the results show...... that the smart grid incrementally not revolutionary influences the Danish DSOs' business models, and the smart grid transformation of the Danish electricity grid is slower than the agenda of the official Danish smart grid development strategy....

  9. FY 1998 Report on development of large-scale wind power generation systems. Feasibility study on development of new technologies for wind power generation (Study on the development of wind power generation systems for small-scale power grids); 1998 nendo ogata furyoku hatsuden system kaihatsu seika hokokusho. Furyoku hatsuden shingijutsu kaihatsu kanosei chosa (shokibo keito ni okeru furyoku hatsuden system ni kansuru chosa)

    NONE

    1999-03-01

    This survey includes the characteristics of small-scale power grids, feasibility studies on introduction of wind turbines in these grids, and statuses of application of wind turbines to isolated islands or the like in the advanced countries, in order to promote introduction of wind power generation systems in isolated islands or the like. It is concluded that small-capacity wind power generation systems can be possibly introduced in the intermediate- to large-scale grids in isolated islands, 1,500kW or larger in capacity, in the Tokyo, Kyushu and Okinawa Electric Power Companies' areas. A scheduled steamer ship for isolated islands can carry up to 10 ton track, and introduction of a small-scale wind turbine is more advantageous viewed from the transportation cost. Some foreign countries have the sites which have achieved a high percentage of grid connection of wind power units by stabilizing wind conditions and connecting them to the main high-voltage grids in different manners from those adopted in Japan. For developing wind turbine bodies, most of the foreign countries surveyed are concentrating their efforts on development and manufacture of large-size units, paying little attention on development of small-size wind turbines for isolated islands. For the future prospects, the promising concepts include adoption of wind turbines small in capacity and easy to transport and assemble, and hybrid systems combined with power storage units. (NEDO)

  10. FY 1998 Report on development of large-scale wind power generation systems. Feasibility study on development of new technologies for wind power generation (Study on the development of wind power generation systems for small-scale power grids); 1998 nendo ogata furyoku hatsuden system kaihatsu seika hokokusho. Furyoku hatsuden shingijutsu kaihatsu kanosei chosa (shokibo keito ni okeru furyoku hatsuden system ni kansuru chosa)

    NONE

    1999-03-01

    This survey includes the characteristics of small-scale power grids, feasibility studies on introduction of wind turbines in these grids, and statuses of application of wind turbines to isolated islands or the like in the advanced countries, in order to promote introduction of wind power generation systems in isolated islands or the like. It is concluded that small-capacity wind power generation systems can be possibly introduced in the intermediate- to large-scale grids in isolated islands, 1,500kW or larger in capacity, in the Tokyo, Kyushu and Okinawa Electric Power Companies' areas. A scheduled steamer ship for isolated islands can carry up to 10 ton track, and introduction of a small-scale wind turbine is more advantageous viewed from the transportation cost. Some foreign countries have the sites which have achieved a high percentage of grid connection of wind power units by stabilizing wind conditions and connecting them to the main high-voltage grids in different manners from those adopted in Japan. For developing wind turbine bodies, most of the foreign countries surveyed are concentrating their efforts on development and manufacture of large-size units, paying little attention on development of small-size wind turbines for isolated islands. For the future prospects, the promising concepts include adoption of wind turbines small in capacity and easy to transport and assemble, and hybrid systems combined with power storage units. (NEDO)

  11. Decentral Smart Grid Control

    Schäfer, Benjamin; Matthiae, Moritz; Timme, Marc; Witthaut, Dirk

    2015-01-01

    Stable operation of complex flow and transportation networks requires balanced supply and demand. For the operation of electric power grids—due to their increasing fraction of renewable energy sources—a pressing challenge is to fit the fluctuations in decentralized supply to the distributed and temporally varying demands. To achieve this goal, common smart grid concepts suggest to collect consumer demand data, centrally evaluate them given current supply and send price information back to customers for them to decide about usage. Besides restrictions regarding cyber security, privacy protection and large required investments, it remains unclear how such central smart grid options guarantee overall stability. Here we propose a Decentral Smart Grid Control, where the price is directly linked to the local grid frequency at each customer. The grid frequency provides all necessary information about the current power balance such that it is sufficient to match supply and demand without the need for a centralized IT infrastructure. We analyze the performance and the dynamical stability of the power grid with such a control system. Our results suggest that the proposed Decentral Smart Grid Control is feasible independent of effective measurement delays, if frequencies are averaged over sufficiently large time intervals.

  12. Decentral Smart Grid Control

    Schäfer, Benjamin; Matthiae, Moritz; Timme, Marc; Witthaut, Dirk

    2015-01-01

    Stable operation of complex flow and transportation networks requires balanced supply and demand. For the operation of electric power grids—due to their increasing fraction of renewable energy sources—a pressing challenge is to fit the fluctuations in decentralized supply to the distributed and temporally varying demands. To achieve this goal, common smart grid concepts suggest to collect consumer demand data, centrally evaluate them given current supply and send price information back to customers for them to decide about usage. Besides restrictions regarding cyber security, privacy protection and large required investments, it remains unclear how such central smart grid options guarantee overall stability. Here we propose a Decentral Smart Grid Control, where the price is directly linked to the local grid frequency at each customer. The grid frequency provides all necessary information about the current power balance such that it is sufficient to match supply and demand without the need for a centralized IT infrastructure. We analyze the performance and the dynamical stability of the power grid with such a control system. Our results suggest that the proposed Decentral Smart Grid Control is feasible independent of effective measurement delays, if frequencies are averaged over sufficiently large time intervals. (paper)

  13. Grid portal-based data management for lattice QCD data

    Andronico, G. [Istituto Nazionale di Fisica Nucleare, Sezione di Catania, via S. Sofia 64, 95123 Catania (Italy)]. E-mail: giuseppe.andronico@ct.infn.it; Barbera, R. [Istituto Nazionale di Fisica Nucleare, Sezione di Catania, via S. Sofia 64, 95123 Catania (Italy); Dipartimento di Fisica e Astronomia dell' Universita di Catania, via S. Sofia 64, 95123 Catania (Italy); Falzone, A. [NICE SRL, via Marchesi di Roero 1, 14020 Cortanze (Italy)

    2004-11-21

    We describe here a case of the European Union DataGrid Project data management services by a Lattice Quantum ChromoDynamics (LQCD) application to share the large amount of configurations generated and based on a solution developed from the International Lattice Data Grid Project using a XML dialect called QCDML. In order to allow the user to store, search and browse the lattice configurations described by QCDML in an uniform and transparent way, we have exploited the functionalities of the GENIUS Grid portal, jointly developed by INFN and NICE srl in the context of the Italian INFN Grid and EU DataGrid Projects.

  14. Grid portal-based data management for lattice QCD data

    Andronico, G.; Barbera, R.; Falzone, A.

    2004-01-01

    We describe here a case of the European Union DataGrid Project data management services by a Lattice Quantum ChromoDynamics (LQCD) application to share the large amount of configurations generated and based on a solution developed from the International Lattice Data Grid Project using a XML dialect called QCDML. In order to allow the user to store, search and browse the lattice configurations described by QCDML in an uniform and transparent way, we have exploited the functionalities of the GENIUS Grid portal, jointly developed by INFN and NICE srl in the context of the Italian INFN Grid and EU DataGrid Projects

  15. Power systems signal processing for smart grids

    Ribeiro, Paulo Fernando; Ribeiro, Paulo Márcio; Cerqueira, Augusto Santiago

    2013-01-01

    With special relation to smart grids, this book provides clear and comprehensive explanation of how Digital Signal Processing (DSP) and Computational Intelligence (CI) techniques can be applied to solve problems in the power system. Its unique coverage bridges the gap between DSP, electrical power and energy engineering systems, showing many different techniques applied to typical and expected system conditions with practical power system examples. Surveying all recent advances on DSP for power systems, this book enables engineers and researchers to understand the current state of the art a

  16. Transmission grid security

    Haarla, Liisa; Hirvonen, Ritva; Labeau, Pierre-Etienne

    2011-01-01

    In response to the growing importance of power system security and reliability, ""Transmission Grid Security"" proposes a systematic and probabilistic approach for transmission grid security analysis. The analysis presented uses probabilistic safety assessment (PSA) and takes into account the power system dynamics after severe faults. In the method shown in this book the power system states (stable, not stable, system breakdown, etc.) are connected with the substation reliability model. In this way it is possible to: estimate the system-wide consequences of grid faults; identify a chain of eve

  17. A Guidebook on Grid Interconnection and Islanded Operation of Mini-Grid Power Systems Up to 200 kW

    Greacen, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Engel, Richard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Quetchenbach, Thomas [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-04-01

    A Guidebook on Grid Interconnection and Islanded Operation of Mini-Grid Power Systems Up to 200 kW is intended to help meet the widespread need for guidance, standards, and procedures for interconnecting mini-grids with the central electric grid as rural electrification advances in developing countries, bringing these once separate power systems together. The guidebook aims to help owners and operators of renewable energy mini-grids understand the technical options available, safety and reliability issues, and engineering and administrative costs of different choices for grid interconnection. The guidebook is intentionally brief but includes a number of appendices that point the reader to additional resources for indepth information. Not included in the scope of the guidebook are policy concerns about “who pays for what,” how tariffs should be set, or other financial issues that are also paramount when “the little grid connects to the big grid.”

  18. Trends in life science grid: from computing grid to knowledge grid

    Konagaya Akihiko

    2006-12-01

    Full Text Available Abstract Background Grid computing has great potential to become a standard cyberinfrastructure for life sciences which often require high-performance computing and large data handling which exceeds the computing capacity of a single institution. Results This survey reviews the latest grid technologies from the viewpoints of computing grid, data grid and knowledge grid. Computing grid technologies have been matured enough to solve high-throughput real-world life scientific problems. Data grid technologies are strong candidates for realizing "resourceome" for bioinformatics. Knowledge grids should be designed not only from sharing explicit knowledge on computers but also from community formulation for sharing tacit knowledge among a community. Conclusion Extending the concept of grid from computing grid to knowledge grid, it is possible to make use of a grid as not only sharable computing resources, but also as time and place in which people work together, create knowledge, and share knowledge and experiences in a community.

  19. Smart Grid Technologies in Europe: An Overview

    Luca Ardito

    2013-01-01

    Full Text Available The old electricity network infrastructure has proven to be inadequate, with respect to modern challenges such as alternative energy sources, electricity demand and energy saving policies. Moreover, Information and Communication Technologies (ICT seem to have reached an adequate level of reliability and flexibility in order to support a new concept of electricity network — the smart grid. In this work, we will analyse the state-of-the-art of smart grids, in their technical, management, security, and optimization aspects. We will also provide a brief overview of the regulatory aspects involved in the development of a smart grid, mainly from the viewpoint of the European Union.

  20. Grid parity: the quest for the Grail

    Bahjejian, L.

    2012-01-01

    The cost of photovoltaic systems is decreasing and the price of electrical power is increasing, so at one moment the 2 curves will meet and at that moment there will be grid parity, it means that the photovoltaic power will be as competitive as other energies and will need no more subsidies. In Denmark the electricity is so expensive that the grid parity has already been reached and photovoltaic power is developing there on the basis of net metering. According to the EPIA (European Association for Photovoltaic Industry), France, Germany, Italy, Spain and United-Kingdom will reach grid parity by 2020. (A.C.)

  1. Quality Assurance Framework for Mini-Grids

    Esterly, Sean; Baring-Gould, Ian; Booth, Samuel

    2017-05-04

    To address the root challenges of providing quality power to remote consumers through financially viable mini-grids, the Global Lighting and Energy Access Partnership (Global LEAP) initiative of the Clean Energy Ministerial and the U.S. Department of Energy teamed with the National Renewable Energy Laboratory (NREL) and Power Africa to develop a Quality Assurance Framework (QAF) for isolated mini-grids. The framework addresses both alternating current (AC) and direct current (DC) mini-grids, and is applicable to renewable, fossil-fuel, and hybrid systems.

  2. Smart Transmission Grids - Benefits and Risks

    Velasco-Ramírez E.

    2013-01-01

    Full Text Available Nowadays the Power Systems are working near their stability limits, for this reason it is necessary and essential a transition to new transmission systems that ensure efficient delivery of electrical energy, with the objective to prevent “blackouts” that causesignificant losses in the economy of any country in the world. This paper analyzes important elements to consider having a healthy and efficient transition from a power grid vertically integrated into a smart transmission grid. A comparative analysis in the model, development, benefits and risks of the implementation of these systems, between two of the main marc of references of smart grids, the EU and the USA is presented.

  3. Gridded multibeam bathymetry of Aguijan, Tinian, Farallon de Medinilla and Saipan Islands and Tatsumi and Marpi Banks, CNMI

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry shelf, bank and slope environments of Aguijan, Tinian, Farallon de Medinilla and Saipan Islands and Tatsumi and Marpi Banks, CNMI. Bottom coverage...

  4. CRED 60 m Gridded bathymetry and IKONOS estimated depths of UTM Zone 2, Northwestern Hawaiian Islands, USA (Arc ASCII format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of the Northwestern Hawaiian Islands, USA within UTM Zone 2. Bottom coverage was...

  5. CRED 5 m Gridded bathymetry of Baker Island, Pacific Remote Island Areas, Central Pacific (Arc ASCII Format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded (5 m cell size) bathymetry of the shelf and slope environments of Baker Island, Pacific Remote Isand Areas, Central Pacific. Almost complete bottom coverage...

  6. CRED 20m Gridded bathymetry and IKONOS estimated depths of Pearl and Hermes Atoll, Hawaii, USA (Arc ASCII format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of Pearl and Hermes Atoll, Hawaii, USA. Bottom coverage was achieved in depths...

  7. CRED 5 m Gridded bathymetry and IKONOS estimated depths of Pearl and Hermes Atoll, Hawaii, USA (Arc ASCII format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of Pearl and Hermes Atoll, Hawaii, USA. Bottom coverage was achieved in depths...

  8. CRED 20 m Gridded bathymetry and IKONOS estimated depths of Pearl and Hermes Atoll, Hawaii, USA (NetCDF format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of Pearl and Hermes Atoll, Hawaii, USA. Bottom coverage was achieved in depths...

  9. CRED 5 m Gridded bathymetry and IKONOS estimated depths of Pearl and Hermes Atoll, Hawaii, USA (NetCDF format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of Pearl and Hermes Atoll, Hawaii, USA. Bottom coverage was achieved in depths...

  10. CRED 60m Gridded bathymetry and IKONOS estimated depths of UTM Zone 3, Northwestern Hawaiian Islands, USA (Arc ASCII format)

    National Oceanic and Atmospheric Administration, Department of Commerce — Gridded bathymetry and IKONOS estimated depths of the shelf and slope environments of the Northwestern Hawaiian Islands, USA within UTM Zone 3. Bottom coverage was...

  11. Lincoln Laboratory Grid

    Federal Laboratory Consortium — The Lincoln Laboratory Grid (LLGrid) is an interactive, on-demand parallel computing system that uses a large computing cluster to enable Laboratory researchers to...

  12. CMS computing on grid

    Guan Wen; Sun Gongxing

    2007-01-01

    CMS has adopted a distributed system of services which implement CMS application view on top of Grid services. An overview of CMS services will be covered. Emphasis is on CMS data management and workload Management. (authors)

  13. Meet the Grid

    Yurkewicz, Katie

    2005-01-01

    Today's cutting-edge scientific projects are larger, more complex, and more expensive than ever. Grid computing provides the resources that allow researchers to share knowledge, data, and computer processing power across boundaries

  14. World Wide Grid

    Grätzel von Grätz, Philipp

    2007-01-01

    Whether for genetic risk analysis or 3D-rekonstruktion of the cerebral vessels: the modern medicine requires more computing power. With a grid infrastructure, this one can be if necessary called by the network. (4 pages)

  15. Spacer grid corner gusset

    Larson, J.G.

    1984-01-01

    There is provided a spacer grid for a bundle of longitudinally extending rods in spaced generally parallel relationship comprising spacing means for holding the rods in spaced generally parallel relationship; the spacing means includes at least one exterior grid strip circumscribing the bundle of rods along the periphery thereof; with at least one exterior grid strip having a first edge defining the boundary of the strip in one longitudinal direction and a second edge defining the boundary of the strip in the other longitudinal direction; with at least one exterior grid strip having at least one band formed therein parallel to the longitudinal direction; a plurality of corner gussets truncating each of a plurality of corners formed by at least one band and the first edge and the second edge

  16. US National Grid

    Kansas Data Access and Support Center — This is a polygon feature data layer of United States National Grid (1000m x 1000m polygons ) constructed by the Center for Interdisciplinary Geospatial Information...

  17. Controlling smart grid adaptivity

    Toersche, Hermen; Nykamp, Stefan; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2012-01-01

    Methods are discussed for planning oriented smart grid control to cope with scenarios with limited predictability, supporting an increasing penetration of stochastic renewable resources. The performance of these methods is evaluated with simulations using measured wind generation and consumption

  18. Grid Computing Education Support

    Steven Crumb

    2008-01-15

    The GGF Student Scholar program enabled GGF the opportunity to bring over sixty qualified graduate and under-graduate students with interests in grid technologies to its three annual events over the three-year program.

  19. Microstrip Antenna Design for Femtocell Coverage Optimization

    Afaz Uddin Ahmed

    2014-01-01

    Full Text Available A mircostrip antenna is designed for multielement antenna coverage optimization in femtocell network. Interference is the foremost concern for the cellular operator in vast commercial deployments of femtocell. Many techniques in physical, data link and network-layer are analysed and developed to settle down the interference issues. A multielement technique with self-configuration features is analyzed here for coverage optimization of femtocell. It also focuses on the execution of microstrip antenna for multielement configuration. The antenna is designed for LTE Band 7 by using standard FR4 dielectric substrate. The performance of the proposed antenna in the femtocell application is discussed along with results.

  20. Development, investigation and modelling of a micro reformer as part of a system for off-grid power supply with PEM fuel cells

    Rochlitz, Lisbeth

    2008-11-18

    In this thesis a micro reformer fuel cell system ({mu}RFCS) for 300 Wel off-grid power supply, fuelled with bioethanol, was simulated, designed, developed and investigated in a test-rig. First a literature study was carried through to point out the specific characteristics of micro reforming, the most important being heat transfer, and present the systems currently under research and already on the market. As a next step, the processes of the RFCS were simulated with the commercial simulation tool CHEMCAD. This comprised thermodynamic equilibrium simulations for the separate reactions of steam reforming, water gas shift and selective methanation. It also included a simulation of the complete {mu}RFCS with thermodynamic equilibrium for all reactors and assumed values for heat loss and fuel cell efficiency. The resulting net electrical efficiency was 24%. As a third step, a reaction pathway scheme with parallel and serial reactions for the steam reforming reaction of ethanol was simulated, developed, evaluated and proven plausible by matching the simulation to experimental results obtained in the {mu}RFCS test rig. The equilibrium simulations were used to evaluate the catalyst screening carried through for reformer, water gas shift and selective methanation catalysts. The catalysts for the {mu}RFCS were chosen and the optimum operating conditions determined by the screening tests. Having accomplished the simulation and design of the system, the largest proportion of this work was spent on the construction, set-up, testing and evaluation of the complete {mu}RFCS. The focus for the evaluations lay on the reformer side of the system. The technical feasibility was demonstrated for an ethanol/water mix of 3 ml/min at S/C 3. The first tests without optimized heat and water management between the reformer system and the fuel cell system resulted in power output of around 115 W{sub el}, at a total electrical efficiency of 31%. (orig.)