WorldWideScience

Sample records for green technology pilot

  1. 75 FR 1591 - Green Technology Pilot Program

    Science.gov (United States)

    2010-01-12

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed... methods: E-mail: [email protected] . Include A0651-0062 Green Technology Pilot Program [email protected] in... (USPTO) is implementing a streamlined examination pilot program for patent applications pertaining to...

  2. 75 FR 64692 - Green Technology Pilot Program

    Science.gov (United States)

    2010-10-20

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed...- 0062 Green Technology Pilot Program comment'' in the subject line of the message. Fax: 571-273-0112... United States Patent and Trademark Office (USPTO) implemented a pilot program on December 8, 2009, that...

  3. 75 FR 69049 - Expansion and Extension of the Green Technology Pilot Program

    Science.gov (United States)

    2010-11-10

    ... under the Green Technology Pilot Program is available on the USPTO's Internet Web site at http://www... Extension of the Green Technology Pilot Program AGENCY: United States Patent and Trademark Office, Commerce...) implemented the Green [[Page 69050

  4. 75 FR 28554 - Elimination of Classification Requirement in the Green Technology Pilot Program

    Science.gov (United States)

    2010-05-21

    ...] Elimination of Classification Requirement in the Green Technology Pilot Program AGENCY: United States Patent... (USPTO) implemented the Green Technology Pilot Program on December 8, 2009, which permits patent... technologies. However, the pilot program was limited to only applications classified in a number of U.S...

  5. ADVANTAGES OF GREEN TECHNOLOGY

    OpenAIRE

    Ghanshyam Das Soni

    2017-01-01

    Technology is application of knowledge to practical requirements. Green technologies encompass various aspects of technology which help us reduce the human impact on the environment and create ways of sustainable development. Social equitability, economic feasibility and sustainability are the key parameters for green technologies. Today the environment is racing towards the tipping point at which we would have done permanent irreversible damage to the planet earth. Our current actions are pu...

  6. Green technology meets ecotoxicology

    Directory of Open Access Journals (Sweden)

    Kristina Radošević

    2016-01-01

    Full Text Available By applying concept and principles of green chemistry into different technological processes, green technologies are developed. The environmental and economic benefits of “green” approach is achieved through several directions, such as the use of renewable raw materials, creation of economic efficiency, the use of alternative reaction conditions, as well as the application of non-conventional solvents. From the point view of green chemistry, alternative solvents, in order to be a “green“ substitution to hazardous organic solvents, should be: non-volatile, non-flammable, stabile, synthesized by an environmentally friendly procedure, nontoxic and biodegradable. The toxic impact of all newly synthesized chemicals, such as alternative solvents, could be determined by methods and techniques of ecotoxicology. Ecotoxicology, an interdisciplinary scientific field, can serve as a way of monitoring the greenness of the processes. In vivo and in vitro experiments are used to study the effects of chemicals on different levels of organizations, from molecules to communities and ecosystem. The usage of in vitro methods is encouraged by a scientific community and regulatory agencies as an alternative to in vivo studies in order to reduce the number of laboratory animals used in the toxicological studies. Therefore, in this paper we gave a brief overview on the usage of animal cell cultures within the field of green chemistry and technology.

  7. News: Green Chemistry & Technology

    Science.gov (United States)

    A series of 21 articles focused on different features of green chemistry in a recent issue of Chemical Reviews. Topics extended over a wide range to include the design of sustainable synthetic processes to biocatalysis. A selection of perspectives follows as part of this colu

  8. Green technology innovation in a developing country

    Science.gov (United States)

    Treesubsuntorn, Chairat; Dolphen, Rujira; Dhurakit, Prapai; Siswanto, Dian; Thiravetyan, Paitip

    2017-11-01

    Developing countries rapidly grow when green technology, which is referred to as eco-friendly processes or methods, is developed in parallel. Here, some examples of green technology research and development in Thailand will be overviewed. A huge amount of agricultural waste is generated during agricultural processes. Applying these agricultural wastes in order to maximize the benefits for environmental cleanups of water, soil and air has been studied and commercialized. For example: 1) Application of agricultural waste and/or biochar developed from agricultural waste as biological adsorbents for wastewater treatment in some industries, such as textile/dye industries, and printing industries. In addition, this agricultural waste can also be applied in decolorization of sugar syrup from sugar industries; 2) The research on modified biomaterials as adsorbents and packing materials in biofilters would also be presented, and now, pilot scale biofilters have been developed and applied to solve air pollution problems in the field for future commercialization; 3) Some agricultural waste and/or biochar developed from agricultural waste in our laboratory can promote rice growth and improve rice quality via the reduction of Cd uptake and translocation in rice. Phytoremediation technology, in which plants are used to improve the environmental quality in water and air, has also been studied and would be presented. 1) Some species of native Thai plants can effectively remove heavy metals and dye from wastewater. For this research, a constructed wetland for wastewater treatment was developed and applied in a real contaminated site. 2) In air phytoremediation, some plant species harbor highly volatile organic compound (VOC) removal efficiency. In addition, plants do not only absorb organic pollutants, but also they have the innate ability to degrade organic compounds and use them as carbon sources for their growth. In addition, plant growth-promoting (PGP) bacteria inoculation

  9. Green Technology for Smart Cities

    Science.gov (United States)

    Casini, M.

    2017-08-01

    In view of the enormous social and environmental changes at the global level, more and more cities worldwide have directed their development strategies towards smart policies aimed at sustainable mobility, energy upgrading of the building stock, increase of energy production from renewable sources, improvement of waste management and implementation of ICT infrastructures. The goal is to turn into Smart Cities, able to improve the quality of life of their inhabitants by offering a lasting opportunity for cultural, economic and social growth within a healthy, safe, stimulating and dynamic environment. After an overview of the role of cities in climate changes and environmental pollution worldwide, the article provides an up to date definition of Smart City and of its main expected features, focussing on technology innovation, smart governance and main financing and support programs. An analysis of the most interesting initiatives at the international level pursued by cities investigating the three main areas of Green Buildings, Smart grid-Smart lighting, and Smart mobility is given, with the objective to offer a broad reference for the identification of development sustainable plans and programs at the urban level within the current legislative framework.

  10. A pilot study to evaluate runoff quantity from green roofs.

    Science.gov (United States)

    Lee, Ju Young; Lee, Min Jung; Han, Mooyoung

    2015-04-01

    The use of green roofs is gaining increased recognition in many countries as a solution that can be used to improve environmental quality and reduce runoff quantity. To achieve these goals, pilot-scale green roof assemblies have been constructed and operated in an urban setting. From a stormwater management perspective, green roofs are 42.8-60.8% effective in reducing runoff for 200 mm soil depth and 13.8-34.4% effective in reducing runoff for 150 mm soil depth. By using Spearman rank correlation analysis, high rainfall intensity was shown to have a negative relationship with delayed occurrence time, demonstrating that the soil media in green roofs do not efficiently retain rainwater. Increasing the number of antecedent dry days can help to improve water retention capacity and delay occurrence time. From the viewpoint of runoff water quality, green roofs are regarded as the best management practice by filtration and adsorption through growth media (soil). Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Green marketing in the Massachusetts electric company retail competition pilot program

    Energy Technology Data Exchange (ETDEWEB)

    Rothstein, S.M.; Fang, J.M.

    1997-10-01

    With electric industry restructuring initiatives being introduced on the state and federal levels, retail access pilot programs serve an important function for examining competitive market issues, as well as marketing strategies and customer reactions to different power supply options. The experience gained through these pilots provides important insights into future power market operations, including the market for green power. The Massachusetts Electric Company`s (MECo`s) Choice: New England pilot for residential and small-business customers was a voluntary program developed primarily to test the billing and metering logistics that distribution companies will need in the competitive market. The pilot also offered a preview of program implementation and marketing under customer choice. It was the first retail competition pilot to explicitly include green power options in program design. The MECo pilot`s energy suppliers were selected through the issuance of a request for proposals (RFP). Respondents were asked to submit bids in one or more of three energy supply categories-price, green, and other options. These options were developed by the pilot administrator through internal meetings, discussions with state officials and other stakeholders, and a review of information from other similar pilots. For the green option, the pilot administrator did not establish a green standard. Instead, suppliers were allowed to submit offers that promoted environmental stewardship. Customer response to the different green options are reported. The pilot results clearly demonstrate that, in a competitive situation, there is interest in a variety of energy supply options, including green options. 2 tabs.

  12. Green Technology Adoption and the Business Cycle

    OpenAIRE

    Bourgeon , Jean-Marc; Hovsepian , Margot

    2018-01-01

    We analyze the adoption of green technology in a dynamic economy affected by random shocks where demand spillovers are the main driver of technological improvements. Firms’ beliefs and consumers’ anticipations drive the path of the economy. We derive the optimal policy of investment subsidy and the expected time and likelihood of reaching a targeted level of environmental quality under economic uncertainty. This allows us to estimate the value that should be given to the environment in order ...

  13. Application of BIM technology in green building material management system

    Science.gov (United States)

    Zhineng, Tong

    2018-06-01

    The current green building materials management system in China's construction industry is not perfect, and there are still many shortcomings. Active construction of green building materials management system based on BIM technology, combined with the characteristics of green building materials and its relationship with BIM technology application, is urgently needed to better realize the scientific management of green building materials.

  14. Friction Stir Welding Process: A Green Technology

    OpenAIRE

    Esther T. Akinlabi; Stephen A. Akinlabi

    2012-01-01

    Friction Stir Welding (FSW) is a solid state welding process invented and patented by The Welding Institute (TWI) in the United Kingdom in 1991 for butt and lap welding of metals and plastics. This paper highlights the benefits of friction stir welding process as an energy efficient and a green technology process in the field of welding. Compared to the other conventional welding processes, its benefits, typical applications and its use in joining similar and dissimilar materia...

  15. Effects of Technological Innovation in Relationship between Green Supply Chain Management Practices and Green Performance

    OpenAIRE

    Umar, Mohammed Sangiru; Danjuma, Ibrahim; Hammawa, Dahiru Dauda; Habibu, Sherif Ahmed

    2016-01-01

    Although scholars have conceptualised on green supply chain management practices and green performance, evidence to validate the conceptualisation was lacking, albeit in the context of small and medium enterprises. In addition, effect of technological innovation on supply chain practices and green performance was largely unexplored by researchers. Therefore this study validates and provides empirical evidence on the relationship between green supply chain management practices, technological i...

  16. Pilot demonstrations of arsenic removal technologies.

    Energy Technology Data Exchange (ETDEWEB)

    Siegal Malcolm D.

    2004-09-01

    The Arsenic Water Technology Partnership (AWTP) program is a multi-year program funded by a congressional appropriation through the Department of Energy to develop and test innovative technologies that have the potential to reduce the costs of arsenic removal from drinking water. The AWTP members include Sandia National Laboratories, the American Water Works Association (Awwa) Research Foundation and WERC (A Consortium for Environmental Education and Technology Development). The program is designed to move technologies from bench-scale tests to field demonstrations. The Awwa Research Foundation is managing bench-scale research programs; Sandia National Laboratories is conducting the pilot demonstration program and WERC will evaluate the economic feasibility of the technologies investigated and conduct technology transfer activities. The objective of the Sandia Arsenic Treatment Technology Demonstration project (SATTD) is the field demonstration testing of both commercial and innovative technologies. The scope for this work includes: (1) Identification of sites for pilot demonstrations; (2) Accelerated identification of candidate technologies through Vendor Forums, proof-of-principle laboratory and local pilot-scale studies, collaboration with the Awwa Research Foundation bench-scale research program and consultation with relevant advisory panels; and (3) Pilot testing multiple technologies at several sites throughout the country, gathering information on: (a) Performance, as measured by arsenic removal; (b) Costs, including capital and Operation and Maintenance (O&M) costs; (c) O&M requirements, including personnel requirements, and level of operator training; and (d) Waste residuals generation. The New Mexico Environment Department has identified over 90 public water systems that currently exceed the 10 {micro}g/L MCL for arsenic. The Sandia Arsenic Treatment Technology Demonstration project is currently operating pilots at three sites in New Mexico. The cities of

  17. Pilot project of atomic energy technology record

    International Nuclear Information System (INIS)

    Song, K. C.; Kim, Y. I.; Kim, Y. G.

    2011-12-01

    Project of the Atomic Energy Technology Record is the project that summarizes and records in each category as a whole summary from the background to the performance at all fields of nuclear science technology which researched and developed at KAERI. This project includes Data and Document Management System(DDMS) that will be the system to collect, organize and preserve various records occurred in each research and development process. To achieve these goals, many problems should be solved to establish technology records process, such as issues about investigation status of technology records in KAERI, understanding and collection records, set-up project system and selection target field, definition standards and range of target records. This is a research report on the arrangement of research contents and results about pilot project which records whole nuclear technology researched and developed at KAERI in each category. Section 2 summarizes the overview of this pilot project and the current status of technology records in domestic and overseas, and from Section 3 to Section 6 summarize contents and results which performed in this project. Section 3 summarizes making TOC(Table of Content) and technology records, Section 4 summarizes sectoral templates, Section 5 summarizes writing detailed plan of technology records, and Section 6 summarizes Standard Document Numbering System(SDNS). Conclusions of this report are described in Section 7

  18. Technology Cooperation Agreement Pilot Project (TCAPP)

    Energy Technology Data Exchange (ETDEWEB)

    Keegan, P.; Benioff, R.

    1999-10-20

    The Technology Cooperation Agreement Pilot Project (TCAPP) is helping developing countries design and implement actions to attract investment in clean energy technologies that will meet their economic development goals, while mitigating greenhouse gas emissions. TCAPP was launched by three US government agencies -- the US Agency for International Development (USAID), the US Environmental Protection Agency (USEPA), and the US Department of Energy (USDOE) -- in August 1997 to establish a model for climate change technology cooperation with developing and transition countries. This report describes the TCAPP approach and the significant progress made by the participating countries.

  19. Advancing Green Economy through Technology Transfer ...

    African Journals Online (AJOL)

    ii) highlighting how successfully implemented pilot and innovative solar energy kiosks and solar fish dryers can serve as case studies on enhancing environmental education efforts. Based on experiences from the projects, a literature review, ...

  20. Contribution of components of Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement-A Pilot Empirical Study of the Indian Automobile Manufacturing Sector

    OpenAIRE

    Mohd. Asif Gandhi

    2017-01-01

    This paper is one of the several extensions of the research works done by [5]. Green Supply Chain Practices have been known to have an impact on Green Supply Chain Performance [5].This paper tests empirically through a pilot study of the Indian Automobile Manufacturing Sector, the contribution of the three variables constituting the construct Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement. Also the paper establishes the reliability of the questionnaire...

  1. Advancing Green Economy through Technology Transfer

    African Journals Online (AJOL)

    countries and provides food security and universal access to basic health, .... and traditional drying is done outdoors with nets spread between poles. ... assistance by replicating successful green economy projects in locations where benefits to.

  2. A Complete Set of Technologies for Green Food Pork Production

    Institute of Scientific and Technical Information of China (English)

    YANG Xing-wu; SHAN An-shan; JIANG Jiu-tian; ZHANG Tian-feng

    2003-01-01

    Key technologies for green food pork production were described in this article,as aspects of business standardization;production equipments and facilities,product quality control;and pork production site establishment.

  3. Green technological foresight on environmental friendly agriculture: Executive summary

    DEFF Research Database (Denmark)

    Borch, K.; Christensen, S.; Jørgensen, U.

    2005-01-01

    Risø and the co-operators have on behalf of the Forest and Nature Agency completed a technological foresight on environmentally friendly agriculture based on green technologies. A technological foresight is a systematic dialogue on how one prepares forfuture challenges, which have not yet manifes...

  4. Analysis and evaluation of the applicability of green energy technology

    Science.gov (United States)

    Xu, Z. J.; Song, Y. K.

    2017-11-01

    With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

  5. From green technology development to green innovation: inducing regulatory adoption of pathogen detection technology for sustainable forestry

    OpenAIRE

    Hall, Jeremy; Matos, Stelvia; Bachor, Vernon

    2017-01-01

    Technological entrepreneurship has been widely acknowledged as a key driver of modern industrial economies, and more recently, a panacea for environmental and social problems. However, our current understanding of how green-technology ventures emerge and diffuse more sustainable innovations remains limited. We advance theory on green entrepreneurship by drawing on institutional work to refine and extend our understanding of how entrepreneurs may influence government policies and practices in ...

  6. Towards Implementation of Green Technology in Sabah Construction Industry

    Science.gov (United States)

    Azland Jainudin, Noor; Jugah, Ivy; Nasrizal Awang Ali, Awang; Tawie, Rudy

    2017-12-01

    The construction industry in Sabah is one of the major roles for development of social, economic infrastructures and buildings in generating wealth to the state besides the tourism sector. The increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. The objective of the research is to identify the awareness and implementation of green technology in construction industry in Kota Kinabalu, Sabah. The methodology of the research is through distributing the questionnaire to the contractors, developers, consultants, architects and state government agencies to the area in Kota Kinabalu only. The questionnaires had been analysed to find out the mean value. 100 questionnaires distributed to the respondents but merely 85 questionnaires collected have been analysed. Based on the findings, 83.5% organisations were aware with the concept of green technology in construction project. In terms of the implementation only 64.7% had been implemented in their organizations. More than 50% from the major players such as contractors, consultants, developers, architects and state government agencies were aware based on six green technology concepts in their organizations. As a conclusion, the awareness towards green policy concept in construction industry is very satisfied. Meanwhile, in terms of implementation need to be increased the number of organizations to be involved in green technology in construction industry.

  7. Green solvents and technologies for oil extraction from oilseeds.

    Science.gov (United States)

    Kumar, S P Jeevan; Prasad, S Rajendra; Banerjee, Rintu; Agarwal, Dinesh K; Kulkarni, Kalyani S; Ramesh, K V

    2017-01-01

    Oilseeds are crucial for the nutritional security of the global population. The conventional technology used for oil extraction from oilseeds is by solvent extraction. In solvent extraction, n -hexane is used as a solvent for its attributes such as simple recovery, non-polar nature, low latent heat of vaporization (330 kJ/kg) and high selectivity to solvents. However, usage of hexane as a solvent has lead to several repercussions such as air pollution, toxicity and harmfulness that prompted to look for alternative options. To circumvent the problem, green solvents could be a promising approach to replace solvent extraction. In this review, green solvents and technology like aqueous assisted enzyme extraction are better solution for oil extraction from oilseeds. Enzyme mediated extraction is eco-friendly, can obtain higher yields, cost-effective and aids in obtaining co-products without any damage. Enzyme technology has great potential for oil extraction in oilseed industry. Similarly, green solvents such as terpenes and ionic liquids have tremendous solvent properties that enable to extract the oil in eco-friendly manner. These green solvents and technologies are considered green owing to the attributes of energy reduction, eco-friendliness, non-toxicity and non-harmfulness. Hence, the review is mainly focussed on the prospects and challenges of green solvents and technology as the best option to replace the conventional methods without compromising the quality of the extracted products.

  8. How Efficient is Green Revolution Technology Adoption in Ghana ...

    African Journals Online (AJOL)

    The study seeks to find out the effects of Green Revolution technology adoption on output/efficiency of agricultural households in Ghana. The method of analysis involves Battese and Coelli's (1993; 1995) one-step estimation of a stochastic frontier model. Technology adoption was found to have positive effects on output.

  9. GREEN TECHNOLOGY COMPLIANCE IN MALAYSIA FOR SUSTAINABLE BUSINESS DEVELOPMENT

    OpenAIRE

    Kamarudin Abu Bakar; Mohd Fazli Mohd Sam; Md Nor Hayati Tahir; Ismi Rajiani; Norhana Muslan

    2011-01-01

    Economic growth, industrialization and growing population in developing countries such as Malaysia, demands a huge growth for renewable energy as global environmental problem call for drastic cuts on fossil fuel consumption. It has resulted in the promotion of green technology that presents the most viable way of meeting with the new green-related activities for environmental conservation. The Malaysian government has played a strong role in ensuring environmental sustainability by way of int...

  10. The Battle for New Resources: Minor minerals in green technologies

    OpenAIRE

    David S. ABRAHAM

    2012-01-01

    Emerging green technologies are the most significant and realistic path to reducing global dependence on polluting fossil fuels while simultaneously decreasing the reliance of many countries on oil-rich regimes to meet their energy needs. However, as nations begin to rely on green energy products, they are trading one set of resource dependencies for another. Wind and sun produce energy, but rare minerals like neodymium and tellurium are essential in applications to harness that power. To the...

  11. ISO New England: Results of Ancillary Service Pilot Programs, Alternative Technology Regulation Pilot Program and Demand Response Reserves Pilot Program

    Energy Technology Data Exchange (ETDEWEB)

    Lowell, Jon [ISO New England, Holyoke, MA (United States); Yoshimura, Henry [ISO New England, Holyoke, MA (United States)

    2011-10-26

    This PowerPoint presentation compares performance of pilot program assets and generation resources in alternative technology regulation and demand response reserves for flywheels and residential electric thermal storage.

  12. Green Roofs: Federal Energy Management Program (FEMP) Federal Technology Alert

    Energy Technology Data Exchange (ETDEWEB)

    Scholz-Barth, K.; Tanner, S.

    2004-09-01

    In a ''green roof,'' a layer of vegetation (e.g., a roof garden) covers the surface of a roof to provide shade, cooler indoor and outdoor temperatures, and effective storm-water management to reduce runoff. The main components are waterproofing, soil, and plants. There are two basic kinds: intensive and extensive. An intensive green roof often features large shrubs and trees, and it can be expensive to install and maintain. An extensive green roof features shallow soil and low-growing, horizontally spreading plants that can thrive in the alpine conditions of many rooftops. These plants do not require a lot of water or soil, and they can tolerate a significant amount of exposure to the sun and wind. This Federal Technology Alert focuses on the benefits, design, and implementation of extensive green roofs and includes criteria for their use on federal facilities.

  13. Green Propellant Infusion Mission Program Development and Technology Maturation

    Science.gov (United States)

    McLean, Christopher H.; Deininger, William D.; Joniatis, John; Aggarwal, Pravin K.; Spores, Ronald A.; Deans, Matthew; Yim, John T.; Bury, Kristen; Martinez, Jonathan; Cardiff, Eric H.; hide

    2014-01-01

    The NASA Space Technology Mission Directorate's (STMD) Green Propellant Infusion Mission (GPIM) Technology Demonstration Mission (TDM) is comprised of a cross-cutting team of domestic spacecraft propulsion and storable green propellant technology experts. This TDM is led by Ball Aerospace & Technologies Corp. (BATC), who will use their BCP- 100 spacecraft to carry a propulsion system payload consisting of one 22 N thruster for primary divert (DeltaV) maneuvers and four 1 N thrusters for attitude control, in a flight demonstration of the AF-M315E technology. The GPIM project has technology infusion team members from all three major market sectors: Industry, NASA, and the Department of Defense (DoD). The GPIM project team includes BATC, includes Aerojet Rocketdyne (AR), Air Force Research Laboratory, Aerospace Systems Directorate, Edwards AFB (AFRL), NASA Glenn Research Center (GRC), NASA Kennedy Space Center (KSC), and NASA Goddard Space Flight Center (GSFC). STMD programmatic and technology oversight is provided by NASA Marshall Space Flight Center. The GPIM project shall fly an operational AF-M315E green propulsion subsystem on a Ball-built BCP-100 spacecraft.

  14. Flaring fix: better technologies green flaring

    International Nuclear Information System (INIS)

    Stastny, P.

    2004-01-01

    Recent advances in reducing solution gas flaring and venting are discussed, highlighting the 2002 report of the Clean Air Strategic Alliance (CASA) and its 39 recommendations targeting a 50 per cent reduction in flaring from a 1996 baseline. Much of the improvement to date (62 per cent at the end of 2002 on an annual basis) has come from collecting and sending gas down pipelines for processing, but improvements in technologies such as incineration, in combustion efficiency, and the use of micro-turbines, also helped to make a difference. Improvements in smokeless flares, through the addition of a special flare tip to flare stacks, has similarly contributed to higher combustion efficiency, and further improvements are expected from sonic flare technology currently under development. Expectations are also high for advances in incinerator technology, particularly enclosed burner systems, which almost completely burn flare gas while having no visible flame, smoke or odor

  15. The Value of Green Technology at ABC Community College

    Science.gov (United States)

    McAllister, Bernadette

    2012-01-01

    A challenge facing community colleges nationwide is to reduce the carbon footprint of campuses by initiating green technology initiatives. This case study assessed the effect of switching from paper assignments to a learning management system at ABC Community College. The topic is important because federal and state funding, as well as…

  16. NASA Green Propulsion Technologies Pushing Aviation to New Heights

    Science.gov (United States)

    Free, James M.; Jennings, Francis T.; Adanich, Emery; Del Rosario, Ruben; Felder, James L.

    2014-01-01

    Center Director Free is providing the Keynote at the Disruptive Propulsion Conference, sponsored by Cranfield University, Cranfield, Bedfordshire, England in November. Director Free will be presenting a PowerPoint presentation titled, NASA Green Propulsion Technologies Pushing Aviation to New Heights at both the conference and a meeting at the Royal Aeronautical Society.

  17. Green Curriculum Analysis in Technological Education

    Science.gov (United States)

    Chakraborty, Arpita; Singh, Manvendra Pratap; Roy, Mousumi

    2018-01-01

    With rapid industrialization and technological development, India is facing adverse affects of unsustainable pattern of production and consumption. Education for sustainable development has been widely recognized to reduce the threat of environmental degradation and resource depletion. This paper used the content analysis method to explore the…

  18. Green Propulsion Technologies for Advanced Air Transports

    Science.gov (United States)

    Del Rosario, Ruben

    2015-01-01

    Air transportation is critical to U.S. and Global economic vitality. However, energy and climate issues challenge aviations ability to be sustainable in the long term. Aviation must dramatically reduce fuel use and related emissions. Energy costs to U.S. airlines nearly tripled between 1995 and 2011, and continue to be the highest percentage of operating costs. The NASA Advanced Air Transports Technology Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the NASA vision of revolutionary systems and propulsion technologies needed to achieve these challenging goals. Specifically, the primary focus is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe, which are envisioned as being powered by Hybrid Electric Propulsion Systems.

  19. Green Technology and its effect on the modern world

    OpenAIRE

    Mueller, Susan

    2017-01-01

    The background of this thesis is to give the reader knowledge about green technology. However, the reader should know about the past, present as well as the potential future beforehand.This thesis was completed using applied knowledge on green IT as well as user oriented design with a focus on planned obsolescence, and used literature research methods.The main sources are from web pages due to the contemporary nature of this topic. The goal of this thesis is that it will hopefully give the re...

  20. Standardization of green building technologies for environment design

    Directory of Open Access Journals (Sweden)

    Benuzh Andrey

    2016-01-01

    Full Text Available The article describes the structure and field of standardization ISO / TC 205 “Building environment design”, provides examples of green building technologies. The main purpose of the article is to show the interaction between international ISO / TC 205 “Building environment design” and created in Russia in 2016 the Technical Committee of Standardization № 366 “Green technology of the build environment and green innovative products”. Both of these technical committees promote green building technologies for environment design, thereby deal with the negative impact on the environment and the reasons of global warming. Instead of buildings that attempt to suppress and overcome nature, why not design buildings that integrate with the environment, on every possible level? The international standardization work which ISO/TC 205 “Building environment design” performs seeks, in addition to lowering trade barriers for engineering design, to promote and facilitate the design of high performance buildings: higher performing as economic assets for their owners, higher performing as buildings that provide amenable indoor environment for their occupants, and higher performing with respect to resource utilization and environmental impact.

  1. ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: GREEN BUILDING TECHNOLOGIES

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This techno...

  2. Green taxes and uncertain timing of technological change

    International Nuclear Information System (INIS)

    Aronsson, T.

    2001-01-01

    This paper concerns the role of environmental taxation in a model with endogenous technological change, where the latter implies that natural inputs become more productive. The timing of technological change is, in turn, uncertain and the likelihood of discovering the new technology is related to the amount of resources spent on R and D. The analysis is based on a dynamic general equilibrium model. One purpose of the paper is to design a policy so as to internalize the external effects arising from pollution and R and D. Another is to develop cost benefit rules for green tax reforms, when the initial equilibrium is suboptimal

  3. Green technologies for the use of urban wastewater: economic analysis

    Directory of Open Access Journals (Sweden)

    Horacio Alfredo Gil

    2013-12-01

    Full Text Available Urban sewage is one of the biggest polluters of water resources. For treatment, the usual conventional technologies (CT are based on civil and hydraulic engineering; more recently, green technologies (GT based on biology and ecology began to be developed. The aim of this study was to assess the economic aspects of these technologies using cost-benefit analysis. The economic benefits are derived from the sale of forest products and the environmental benefits of water decontamination, valued by the avoided cost method. The results of the study establish that GT have better commercial and economic performance than CT, and that the inclusion of environmental benefit significantly improves the results.

  4. Green Gasification Technology for Wet Biomass

    Directory of Open Access Journals (Sweden)

    W. H. Chong

    2010-12-01

    Full Text Available The world now is facing two energy related threats which are lack of sustainable, secure and affordable energy supplies and the environmental damage acquired in producing and consuming ever-increasing amount of energy. In the first decade of the twenty-first century, increasing energy prices reminds us that an affordable energy plays an important role in economic growth and human development. To overcome the abovementioned problem, we cannot continue much longer to consume finite reserves of fossil fuels, the use of which contributes to global warming. Preferably, the world should move towards more sustainable energy sources such as wind energy, solar energy and biomass. However, the abovementioned challenges may not be met solely by introduction of sustainable energy forms. We also need to use energy more efficiently. Developing and introducing more efficient energy conversion technologies is therefore important, for fossil fuels as well as renewable fuels. This assignment addresses the question how biomass may be used more efficiently and economically than it is being used today. Wider use of biomass, a clean and renewable feedstock may extend the lifetime of our fossil fuels resources and alleviate global warming problems. Another advantage of using of biomass as a source of energy is to make developed countries less interdependent on oil-exporting countries, and thereby reduce political tension. Furthermore, the economies of agricultural regions growing energy crops benefit as new jobs are created. Keywords: energy, gasification, sustainable, wet biomass

  5. [Identification of green tea brand based on hyperspectra imaging technology].

    Science.gov (United States)

    Zhang, Hai-Liang; Liu, Xiao-Li; Zhu, Feng-Le; He, Yong

    2014-05-01

    Hyperspectral imaging technology was developed to identify different brand famous green tea based on PCA information and image information fusion. First 512 spectral images of six brands of famous green tea in the 380 approximately 1 023 nm wavelength range were collected and principal component analysis (PCA) was performed with the goal of selecting two characteristic bands (545 and 611 nm) that could potentially be used for classification system. Then, 12 gray level co-occurrence matrix (GLCM) features (i. e., mean, covariance, homogeneity, energy, contrast, correlation, entropy, inverse gap, contrast, difference from the second-order and autocorrelation) based on the statistical moment were extracted from each characteristic band image. Finally, integration of the 12 texture features and three PCA spectral characteristics for each green tea sample were extracted as the input of LS-SVM. Experimental results showed that discriminating rate was 100% in the prediction set. The receiver operating characteristic curve (ROC) assessment methods were used to evaluate the LS-SVM classification algorithm. Overall results sufficiently demonstrate that hyperspectral imaging technology can be used to perform classification of green tea.

  6. Technology transfer? The rise of China and India in green technology sectors

    DEFF Research Database (Denmark)

    Lema, Rasmus; Lema, Adrian

    2012-01-01

    International technology transfer is central to the debate about how to curb the carbon emissions from rapid economic growth in China and India. But given China and India's great progress in building innovation capabilities and green industries, how relevant is technology transfer...... for these countries? This paper seeks insights from three green technology sectors in both countries: wind power, solar energy and electric and hybrid vehicles. We find that, conventional technology transfer mechanisms such as foreign direct investments and licensing, were important for industry formation and take...

  7. RSM Outlook Spring 2007: Green Technology: The New IT

    OpenAIRE

    Morris, Rebecca

    2007-01-01

    markdownabstract#### Sustaining change (Rebecca Morris) An interview with RSM alumnus and Royal DSM Managing Board member Feike Sijbesma. #### Why celebrity sells: The brain mechanisms of persuasion (Vittorio Busato & Rebecca Morris) Marketing researchers at RSM are combining the latest neuroimaging techniques to discover more about what goes on in the brains of consumers. For marketeers, this may help take the last remaining guesswork out of pricey advertising campaigns. #### Green technolog...

  8. Advanced excimer laser technologies enable green semiconductor manufacturing

    Science.gov (United States)

    Fukuda, Hitomi; Yoo, Youngsun; Minegishi, Yuji; Hisanaga, Naoto; Enami, Tatsuo

    2014-03-01

    "Green" has fast become an important and pervasive topic throughout many industries worldwide. Many companies, especially in the manufacturing industries, have taken steps to integrate green initiatives into their high-level corporate strategies. Governments have also been active in implementing various initiatives designed to increase corporate responsibility and accountability towards environmental issues. In the semiconductor manufacturing industry, there are growing concerns over future environmental impact as enormous fabs expand and new generation of equipments become larger and more powerful. To address these concerns, Gigaphoton has implemented various green initiatives for many years under the EcoPhoton™ program. The objective of this program is to drive innovations in technology and services that enable manufacturers to significantly reduce both the financial and environmental "green cost" of laser operations in high-volume manufacturing environment (HVM) - primarily focusing on electricity, gas and heat management costs. One example of such innovation is Gigaphoton's Injection-Lock system, which reduces electricity and gas utilization costs of the laser by up to 50%. Furthermore, to support the industry's transition from 300mm to the next generation 450mm wafers, technologies are being developed to create lasers that offer double the output power from 60W to 120W, but reducing electricity and gas consumption by another 50%. This means that the efficiency of lasers can be improve by up to 4 times in 450mm wafer production environments. Other future innovations include the introduction of totally Heliumfree Excimer lasers that utilize Nitrogen gas as its replacement for optical module purging. This paper discusses these and other innovations by Gigaphoton to enable green manufacturing.

  9. Pilot information needs survey regarding climate relevant technologies

    International Nuclear Information System (INIS)

    Van Berkel, R.; Van Roekel, A.

    1997-02-01

    The objective of this pilot survey was to arrive at a preliminary understanding of the initial technology and technology information needs in non-Annex II countries in order to support international efforts to facilitate the transfer of technologies and know-how conducive to mitigating and adapting to climate change. The study encompassed two main components, i.e. the development of a survey instrument and the execution of a pilot survey among selected non-Annex II countries. The survey instrument addresses the present status of enabling activities; technology and technology information needs; and issues related to information supply and accessibility. The survey was distributed to national focal points in 20 non-Annex II countries and to at least 35 other stakeholders in five of these non-Annex II countries. A total of 27 completed questionnaires were received, covering 10 non-Annex II countries. 3 refs

  10. Pilot information needs survey regarding climate relevant technologies

    Energy Technology Data Exchange (ETDEWEB)

    Van Berkel, R.; Van Roekel, A.

    1997-02-01

    The objective of this pilot survey was to arrive at a preliminary understanding of the initial technology and technology information needs in non-Annex II countries in order to support international efforts to facilitate the transfer of technologies and know-how conducive to mitigating and adapting to climate change. The study encompassed two main components, i.e. the development of a survey instrument and the execution of a pilot survey among selected non-Annex II countries. The survey instrument addresses the present status of enabling activities; technology and technology information needs; and issues related to information supply and accessibility. The survey was distributed to national focal points in 20 non-Annex II countries and to at least 35 other stakeholders in five of these non-Annex II countries. A total of 27 completed questionnaires were received, covering 10 non-Annex II countries. 3 refs.

  11. Review of the Application of Green Building and Energy Saving Technology

    Science.gov (United States)

    Tong, Zhineng

    2017-12-01

    The use of energy-saving technologies in green buildings should run through the entire process of building design, construction and use, enabling green energy-saving technologies to maximize their effectiveness in construction. Realize the sustainable development of green building, reduce energy consumption, reduce people’s interference with the natural environment, suitable for people living in “green” building.

  12. The New Hampshire retail competition pilot program and the role of green marketing

    Energy Technology Data Exchange (ETDEWEB)

    Holt, E.A. [Ed Holt and Associates, Inc. (United States); Fang, J.M. [National Renewable Energy Lab., Golden, CO (United States)

    1997-11-01

    Most states in the US are involved in electric industry restructuring, from considering the pros and cons in regulatory dockets to implementing legislative mandates for full restructuring and retail access for all consumers. Several states and utilities have initiated pilot programs in which multiple suppliers or service providers may compete for business and some utility customers can choose among competing suppliers. The State of New Hampshire has been experimenting with a pilot program, mandated by the State Legislature in 1995 and implemented by the New Hampshire Public Utilities Commission (NHPUC), before it implements full retail access. Green marketing, an attempt to characterize the supplier or service provider as environmentally friendly without referring to the energy resource used to generate electricity, was used by several suppliers or service providers to attract customers. This appeal to environmental consumerism was moderately successful, but it raised a number of consumer protection and public policy issues. This issue brief examines the marketing methods used in New Hampshire and explores what green marketing might mean for the development of renewable energy generation. It also addresses the issues raised and their implications.

  13. Observing Bridge Dynamic Deflection in Green Time by Information Technology

    Science.gov (United States)

    Yu, Chengxin; Zhang, Guojian; Zhao, Yongqian; Chen, Mingzhi

    2018-01-01

    As traditional surveying methods are limited to observe bridge dynamic deflection; information technology is adopted to observe bridge dynamic deflection in Green time. Information technology used in this study means that we use digital cameras to photograph the bridge in red time as a zero image. Then, a series of successive images are photographed in green time. Deformation point targets are identified and located by Hough transform. With reference to the control points, the deformation values of these deformation points are obtained by differencing the successive images with a zero image, respectively. Results show that the average measurement accuracies of C0 are 0.46 pixels, 0.51 pixels and 0.74 pixels in X, Z and comprehensive direction. The average measurement accuracies of C1 are 0.43 pixels, 0.43 pixels and 0.67 pixels in X, Z and comprehensive direction in these tests. The maximal bridge deflection is 44.16mm, which is less than 75mm (Bridge deflection tolerance value). Information technology in this paper can monitor bridge dynamic deflection and depict deflection trend curves of the bridge in real time. It can provide data support for the site decisions to the bridge structure safety.

  14. Extending green technology innovations to enable greener fabs

    Science.gov (United States)

    Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

    2015-03-01

    Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

  15. Introducing technology into medical education: two pilot studies.

    Science.gov (United States)

    George, Paul; Dumenco, Luba; Dollase, Richard; Taylor, Julie Scott; Wald, Hedy S; Reis, Shmuel P

    2013-12-01

    Educators are integrating new technology into medical curriculum. The impact of newer technology on educational outcomes remains unclear. We aimed to determine if two pilot interventions, (1) introducing iPads into problem-based learning (PBL) sessions and (2) online tutoring would improve the educational experience of our learners. We voluntarily assigned 26 second-year medical students to iPad-based PBL sessions. Five students were assigned to Skype for exam remediation. We performed a mixed-method evaluation to determine efficacy. Pilot 1: Seventeen students completed a survey following their use of an iPad during the second-year PBL curriculum. Students noted the iPad allows for researching information in real time, annotating lecture notes, and viewing sharper images. Data indicate that iPads have value in medical education and are a positive addition to the curriculum. Pilot 2: Students agreed that online tutoring is at least or more effective than in-person tutoring. In our pilot studies, students experienced that iPads and Skype are beneficial in medical education and can be successfully employed in areas such as PBL and remediation. Educators should continue to further examine innovative opportunities for introducing technology into medical education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  16. Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

  17. Airlie House Pollution Prevention Technology Transfer pilot projects

    Energy Technology Data Exchange (ETDEWEB)

    Thuot, J.R.; Myron, H.; Gatrone, R.; McHenry, J.

    1996-08-01

    The projects were a series of pilot projects developed for DOE with the intention of transferring pollution prevention technology to private industry. The concept was to develop small technology transfer initiatives in partnership with the private sector. Argonne National Laboratory developed three projects: the microscale chemistry in education program, the microscale cost benefit study, and the Bethel New Life recycling trainee program. The two microscale chemistry projects focused on introducing microscale chemistry technologies to secondary and college education. These programs were inexpensive to develop and received excellent evaluations from participants and regulators. The recycle trainee project provided training for two participants and identified recycling and source reduction opportunities in Argonne`s solid waste stream. The pilot projects demonstrated that technology transfer initiatives can be developed and implemented with a small budget and within a short period of time. The essential components of the pilot projects were identification of target technologies that were already available, identification of target audiences, and a focus of effort to achieve a limited but defined objective.

  18. Are Wave and Tidal Energy Plants New Green Technologies?

    Science.gov (United States)

    Douziech, Mélanie; Hellweg, Stefanie; Verones, Francesca

    2016-07-19

    Wave and tidal energy plants are upcoming, potentially green technologies. This study aims at quantifying their various potential environmental impacts. Three tidal stream devices, one tidal range plant and one wave energy harnessing device are analyzed over their entire life cycles, using the ReCiPe 2008 methodology at midpoint level. The impacts of the tidal range plant were on average 1.6 times higher than the ones of hydro-power plants (without considering natural land transformation). A similar ratio was found when comparing the results of the three tidal stream devices to offshore wind power plants (without considering water depletion). The wave energy harnessing device had on average 3.5 times higher impacts than offshore wind power. On the contrary, the considered plants have on average 8 (wave energy) to 20 (tidal stream), or even 115 times (tidal range) lower impact than electricity generated from coal power. Further, testing the sensitivity of the results highlighted the advantage of long lifetimes and small material requirements. Overall, this study supports the potential of wave and tidal energy plants as alternative green technologies. However, potential unknown effects, such as the impact of turbulence or noise on marine ecosystems, should be further explored in future research.

  19. Onsite Greywater Treatment using Pilot Scale Technology

    Directory of Open Access Journals (Sweden)

    Manzoor-ul-Haq Rajput

    2015-04-01

    Full Text Available The GROW Technology for greywater treatment was installed at the MUET (Mehran University of Engineering & Technology, hostel and run under continuous flow conditions with hydraulic loading rate of 0.15m.d-1. The monitoring and analysis of influent and effluent water were carried out during January-December, 2010. Local plants species such as water hyacinth, Pennywort (duck weed, Mint and Cattail were used in the GROW rig as a mixed mode. Coarse Gravels were filled in the troughs as a medium. The collected samples were analyzed for BOD5 (Biochemical Oxygen Demand, COD (Chemical Oxygen Demand, TSS (Total Suspended Solids, pH, and DO (Dissolved Oxygen. Removal efficiencies of BOD5, COD and TSS were calculated as 83.0,69.0 and 84.0% respectively. DO was found increased from 0.6-3.5 mg.dm-3 while pH was observed between 6.5-7.8

  20. The Effect of Green Payments on the Diffusion of Conservation Technologies

    OpenAIRE

    Hendricks, Nathan P.

    2010-01-01

    The benefits from green payments for the adoption of a conservation technology or practice are reduced if the technology would have eventually been adopted regardless of the green payment. This source of additionality is likely a significant concern for some technologies subsidized by EQIP.

  1. Breaking the impasse in the international climate negotiations: The potential of green technologies

    International Nuclear Information System (INIS)

    Schreurs, Miranda A.

    2012-01-01

    The slow pace of progress in the international climate negotiations is contrasted by the dynamic changes occurring on the ground as competition among countries for green technology leadership heats up. China, Germany, Japan, and the United States all exhibit interest in being green technology leaders although the United States could fall behind due to lack of strong federal government support for climate action. - Highlights: ► International competition for green technology and energy leadership. ► Green energy technology policy in China, Germany, Japan, and the United States. ► Dealing with the international stalemate in the climate negotiations.

  2. Crossword Puzzle Makes It Fun: Introduce Green Manufacturing in Wood Technology Courses

    Science.gov (United States)

    Iley, John L.; Hague, Doug

    2012-01-01

    Sustainable, or "green," manufacturing and its practices are becoming more and more a part of today's industry, including wood product manufacturing. This article provides introductory information on green manufacturing in wood technology and a crossword puzzle based on green manufacturing terms. The authors use the puzzle at the college level to…

  3. Youths’ Green Information and Communications Technology Acceptance and Implications for the Innovation Decision Process

    OpenAIRE

    Thongmak, Mathupayas

    2016-01-01

    ‘Green’ is the trendy word that people pay attention to it. Green ICT is currently highlighted to be an important strategic technology due to its various benefits in terms of reducing greenhouse gas emissions, lowering electricity costs, nurturing corporate images, etc. However, the adoption of green ICT products or services is not prevalent, especially in developing countries. Green consumers, particularly young people, are the key to build the success of the green ICT adoption. Thus, applyi...

  4. Enabling technologies and green processes in cyclodextrin chemistry

    Directory of Open Access Journals (Sweden)

    Giancarlo Cravotto

    2016-02-01

    Full Text Available The design of efficient synthetic green strategies for the selective modification of cyclodextrins (CDs is still a challenging task. Outstanding results have been achieved in recent years by means of so-called enabling technologies, such as microwaves, ultrasound and ball mills, that have become irreplaceable tools in the synthesis of CD derivatives. Several examples of sonochemical selective modification of native α-, β- and γ-CDs have been reported including heterogeneous phase Pd- and Cu-catalysed hydrogenations and couplings. Microwave irradiation has emerged as the technique of choice for the production of highly substituted CD derivatives, CD grafted materials and polymers. Mechanochemical methods have successfully furnished greener, solvent-free syntheses and efficient complexation, while flow microreactors may well improve the repeatability and optimization of critical synthetic protocols.

  5. A cautionary approach in transitioning to 'green' energy technologies and practices is required.

    Science.gov (United States)

    Matatiele, Puleng; Gulumian, Mary

    2016-06-01

    Renewable energy technologies (wind turbines, solar cells, biofuels, etc.) are often referred to as 'clean' or 'green' energy sources, while jobs linked to the field of environmental protection and energy efficiency are referred to as 'green' jobs. The energy efficiency of clean technologies, which is likely to reduce and/or eliminate reliance on fossil fuels, is acknowledged. However, the potential contribution of green technologies and associated practices to ill health and environmental pollution resulting from consumption of energy and raw materials, generation of waste, and the negative impacts related to some life cycle phases of these technologies are discussed. Similarly, a point is made that the green jobs theme is mistakenly oversold because the employment opportunities generated by transitioning to green technologies are not necessarily safe and healthy jobs. Emphasis is put on identifying the hazards associated with these green designs, assessing the risks to the environment and worker health and safety, and either eliminating the hazards or minimizing the risks as essential elements to the design, construction, operation, and maintenance of green technologies. The perception that it is not always economically possible to consider all risk factors associated with renewable energy technologies at the beginning without hampering their implementation, especially in the poor developing countries, is dismissed. Instead, poor countries are encouraged to start implementing environmentally sound practices while transitioning to green technologies in line with their technological development and overall economic growth.

  6. Research on the development of green chemistry technology assessment techniques: a material reutilization case.

    Science.gov (United States)

    Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

    2015-01-01

    This study presents a methodology that enables a quantitative assessment of green chemistry technologies. The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of "greenness" i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market.

  7. Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

    2005-01-01

    The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

  8. Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

    International Nuclear Information System (INIS)

    Kruse, Juergen; Wetzel, Heike; Koeln Univ.

    2014-01-01

    We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

  9. A fair wind blows for one green technology

    International Nuclear Information System (INIS)

    Marshall, E.

    1993-01-01

    The newest windmills are small and robust, typically capable of generating 50 to 500 kilowatts each. Sales have been helped along, both in Europe and the United States, by laws requiring utility companies to offer fixed purchase-price contracts to suppliers of wind electricity. Another boost comes from the National Energy Policy Act, signed into law last fall by George Bush. It permits a 1.5 cent per kilowatt-hour tax credit for generators of electricity from renewable sources. Emphasizing energy production is open-quotes a much smarter approachclose quotes than just rewarding construction of new windmills, says Alexander Ellis, an executive at Kenetech/US Windpower, because it encourages companies to deliver durable products. Today, the wind energy business seems to be booming, bearing out the Administration's faith that environmental technologies can open new markets. There are now more than 16,000 wind turbines installed in the United States, according to DeMeo, most of them still in California. Europe is also moving ahead. Although European countries have installed fewer machines to date, DeMeo says, the European Community has ambitious plans, calling for double the current US wind energy capacity by the end of the decade. About 10 major manufacturers in the United States and abroad are vying for this business. It took some fine-tuning, but government incentives to nurture this green technology seem to be working

  10. Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns.

    Science.gov (United States)

    Du, Bisheng; Liu, Qing; Li, Guiping

    2017-11-08

    Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development.

  11. The acceptance of green technology: A case study in Sabah Development Corridor

    Science.gov (United States)

    Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

    2017-08-01

    Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

  12. Using interactive video technology in nursing education: a pilot study.

    Science.gov (United States)

    Zerr, Daria M; Pulcher, Karen L

    2008-02-01

    A pilot study was conducted to analyze the benefits of using interactive technology with external assessors and graduating senior nursing students during Senior Nurse Leadership Assessment Day at the University of Central Missouri. The primary aim was to determine whether videoconferencing technology would promote recruitment and retention of professional nurse external assessors without compromising student learning. Among the issues discussed are the advantages and disadvantages of using interactive videoconferencing technology in education and the influence of external assessors in nursing education. The study results indicate that interactive videoconferencing is an effective, accepted format for educational opportunities such as Senior Nurse Leadership Assessment Day, based on the lived experiences of the study participants. In addition, the results demonstrate that interactive videoconferencing does not compromise student learning or assessment by external assessors.

  13. Green exercise as a workplace intervention to reduce job stress. Results from a pilot study.

    Science.gov (United States)

    Calogiuri, Giovanna; Evensen, Katinka; Weydahl, Andi; Andersson, Kim; Patil, Grete; Ihlebæk, Camilla; Raanaas, Ruth K

    2015-01-01

    Stress and mental fatigue are major health threats to employees in office-based occupations. Physical activity is widely used as a stress-management intervention for employees. Moreover, experiences in contact with nature have been shown to provide stress-reduction and restoration from mental fatigue. In a pilot study designed as a randomized controlled trial we investigated the impact of a green-exercise intervention on psychological and physiological indicators of stress in municipality employees. Fourteen employees (7 females and 7 males, 49±8 yrs) volunteered in an exercise-based intervention in workplace either outdoors in a green/nature area or in an indoor exercise-setting. The intervention consisted of an information meeting and two exercise sessions, each including a biking bout and a circuit-strength sequence using elastic rubber bands (45-minutes, at about 55% of HR reserve, overall). Main outcomes were perceived environmental potential for restoration, affective state, blood pressure (BP) and cortisol awakening response (CAR AUC(G) and CAR AUC(I)) and cortisol levels in serum. Measurements were taken at baseline and in concomitance with the exercise sessions. Furthermore, affective state and self-reported physical activity levels were measured over a 10-weeks follow-up period. Compared with the indoor group, the nature group reported higher environmental potential for restoration (p <  0.001) and Positive Affect (p <  0.01), along with improved CAR AUC(I) (p = 0.04) and, marginally, diastolic BP (p = 0.05). The nature group also reported higher ratings of Positive Affect at follow-up (p = 0.02). Differences at post-exercise were not found for any of the other components of affective state, systolic BP, CAR AUC(G) and cortisol levels measured in serum. Green-exercise at the workplace could be a profitable way to manage stress and induce restoration among employees. Further studies on larger samples are needed in order to improve the

  14. Conifer Green Needle Complex in Patients with Precancerous Gastric Lesions: An Observational Pilot Study

    Directory of Open Access Journals (Sweden)

    Vladimir Bespalov

    2016-01-01

    Full Text Available Objectives. Helicobacter pylori infection is common and can lead to precancerous gastric lesions. Standard antibiotic therapy has a failure rate of more than 25% from antibiotic resistance. The primary aim of this observational pilot study was to test the feasibility of a large-scale clinical trial of Conifer Green Needle Complex (CGNC to treat precancerous gastric lesions. Secondary aims were to investigate H. pylori infection, stomach function, and histopathology of the gastric mucosa. Methods. A tablet form of CGNC (extracted from Pinus sylvestris and Picea abies (L Karst was prescribed to 26 patients with precancerous gastric lesions (two tablets, 100 mg CGNC/tablet, three times per day for six months. Another 24 patients received no treatment. Results. Compared with control patients, CGNC-treated patients showed total or partial regression (using the quantitative Rome III diagnostic criteria of dyspeptic symptoms (92.3%, p<0.0001, eradication of H. pylori infection (57.1%, p<0.03, a reduction in endoscopic signs of gastritis (92.3%, p<0.001, an increase of pepsinogen-pepsin in the gastric juice (57.7%, p<0.05, and total regression or reduction in the degree of intestinal metaplasia (46.2%, p<0.05 and lymphoplasmacytic infiltration (53.8%, p<0.05. Conclusions. This study justifies a randomised-controlled trial with CGNC in patients with atrophic gastritis.

  15. EMBRACING GREEN TECHNOLOGY INNOVATION THROUGH STRATEGIC HUMAN RESOURCE MANAGEMENT: A CASE OF AN AUTOMOTIVE COMPANY

    OpenAIRE

    Reihaneh Montazeri Shatouri; Rosmini Omar; Kunio Igusa; de São Pedro Filho Flávio

    2013-01-01

    What makes a technological innovation successful for an industry? This study examines how green technology innovation is impacted by strategic management of the human resource in firms. The value of this study lies in its intention to explain the needs to effectively blend people matters first before endeavouring technologies. We focus on Malaysiaâs leading automobile manufacturer, Proton which currently embarks on smart green initiatives in its product development. The quantitative survey id...

  16. Research on Green Construction Technology Applied at Guangzhou Hongding Building Project

    Science.gov (United States)

    Lou, Yong Zhong

    2018-06-01

    The green construction technology is the embodiment of sustainable development strategy in the construction industry, and it is a new construction mode which requires a higher environmental protection. Based on the Hongding building project, this paper describes the application and innovation of technical in the process of implementing green construction in the project, as well as the difficulties and characteristics in the specific practice; .The economic and social benefits of green construction are compared to the traditional construction model; .The achievements and experience of the green construction technology are summarized in the project; The ideas and methods in the process of implementing green construction are abstracted; some suggestions are put forward for the development of green construction.

  17. Evaluation of green roof as green technology for urban stormwater quantity and quality controls

    International Nuclear Information System (INIS)

    Kok, K H; Sidek, L M; Basri, H; Muda, Z C; Beddu, S; Abidin, M R Z

    2013-01-01

    Promoting green design, construction, reconstruction and operation of buildings has never been more critical than now due to the ever increasing greenhouse gas emissions and rapid urbanizations that are fuelling climate change more quickly. Driven by environmental needs, Green Building Index (GBI) was founded in Malaysia to drive initiative to lead the property industry towards becoming more environment-friendly. Green roof system is one of the assessment criteria of this rating system which is under category of sustainable site planning and management. An extensive green roof was constructed in Humid Tropics Center (HTC) Kuala Lumpur as one of the components for Stormwater Management Ecohydrology (SME) in order to obtain scientific data of the system. This paper evaluates the performance of extensive green roof at Humid Tropics Center with respect to urban heat island mitigation and stormwater quantity and quality controls. Findings indicate that there was a reduction of around 1.5°C for indoor temperature of the building after installation of green roof. Simulations showed that the peak discharge was reduced up to 24% relative to impervious brown roof. The results show an increment of pH and high concentration of phosphate for the runoff generated from the green roof and the runoff water quality ranged between class I and II under INWQS.

  18. Evaluation of green roof as green technology for urban stormwater quantity and quality controls

    Science.gov (United States)

    Kok, K. H.; Sidek, L. M.; Abidin, M. R. Z.; Basri, H.; Muda, Z. C.; Beddu, S.

    2013-06-01

    Promoting green design, construction, reconstruction and operation of buildings has never been more critical than now due to the ever increasing greenhouse gas emissions and rapid urbanizations that are fuelling climate change more quickly. Driven by environmental needs, Green Building Index (GBI) was founded in Malaysia to drive initiative to lead the property industry towards becoming more environment-friendly. Green roof system is one of the assessment criteria of this rating system which is under category of sustainable site planning and management. An extensive green roof was constructed in Humid Tropics Center (HTC) Kuala Lumpur as one of the components for Stormwater Management Ecohydrology (SME) in order to obtain scientific data of the system. This paper evaluates the performance of extensive green roof at Humid Tropics Center with respect to urban heat island mitigation and stormwater quantity and quality controls. Findings indicate that there was a reduction of around 1.5°C for indoor temperature of the building after installation of green roof. Simulations showed that the peak discharge was reduced up to 24% relative to impervious brown roof. The results show an increment of pH and high concentration of phosphate for the runoff generated from the green roof and the runoff water quality ranged between class I and II under INWQS.

  19. Green Computing in Local Governments and Information Technology Companies

    Directory of Open Access Journals (Sweden)

    Badar Agung Nugroho

    2013-06-01

    Full Text Available Green computing is a study and practice of designing, manufacturing, using, and disposing of information and communication devices efficiently and effectively with minimum impact on the environment. If the green computing concept was implemented, it will help the agencies or companies to reduce energy and capital cost from their IT infrastructure. The goal from this research is to explore the current condition about the efforts from local governments and IT companies at West Java to implement the green computing concept at their working environment. The primary data were collected by using focus group discussion by inviting the local governments and IT companies representatives who responsible to manage their IT infrastructure. And then, the secondary data were collected by doing brief observation in order to see the real effort of green computing implementation at each institution. The result shows that there are many different perspectives and efforts of green computing implementation between local governments and IT companies.

  20. Effects of Layering Milling Technology on Distribution of Green Wheat Main Physicochemical Parameters

    OpenAIRE

    Tian, Shuang-Qi; Li, Yong-Heng; Chen, Zhi-Cheng; Qiao, Yong-Feng

    2017-01-01

    With layered milling flour technology, the efficiency of the nutrient distribution and hardness was demonstrated with the green and normal wheat separation milling. The results showed that the total content of amino acid in green wheat was 8.3%–13.0% higher compared to the common wheat. Comparing the main nutriments Se, Fe, and Ca between green wheat and common wheat, the results showed that different milling treatment methods are capable of separating the different wheat flour from endosperm...

  1. Optimization of Strategies and Models Review for Optimal Technologies - Based On Fuzzy Schemes for Green Architecture

    OpenAIRE

    Ghada Elshafei; Abdelazim Negm

    2015-01-01

    Recently, the green architecture becomes a significant way to a sustainable future. Green building designs involve finding the balance between comfortable homebuilding and sustainable environment. Moreover, the utilization of the new technologies such as artificial intelligence techniques are used to complement current practices in creating greener structures to keep the built environment more sustainable. The most common objectives in green buildings should be designed t...

  2. Attentional models of multitask pilot performance using advanced display technology.

    Science.gov (United States)

    Wickens, Christopher D; Goh, Juliana; Helleberg, John; Horrey, William J; Talleur, Donald A

    2003-01-01

    In the first part of the reported research, 12 instrument-rated pilots flew a high-fidelity simulation, in which air traffic control presentation of auditory (voice) information regarding traffic and flight parameters was compared with advanced display technology presentation of equivalent information regarding traffic (cockpit display of traffic information) and flight parameters (data link display). Redundant combinations were also examined while pilots flew the aircraft simulation, monitored for outside traffic, and read back communications messages. The data suggested a modest cost for visual presentation over auditory presentation, a cost mediated by head-down visual scanning, and no benefit for redundant presentation. The effects in Part 1 were modeled by multiple-resource and preemption models of divided attention. In the second part of the research, visual scanning in all conditions was fit by an expected value model of selective attention derived from a previous experiment. This model accounted for 94% of the variance in the scanning data and 90% of the variance in a second validation experiment. Actual or potential applications of this research include guidance on choosing the appropriate modality for presenting in-cockpit information and understanding task strategies induced by introducing new aviation technology.

  3. Airspace Technology Demonstration 2 (ATD-2): ATD-2 CLT Pilot Community Engagement

    Science.gov (United States)

    Capps, Al; Hooey, Becky

    2017-01-01

    The Airspace Technology Demonstration 2 (ATD-2) project conducted a pilot community workshop at Charlotte Douglas International Airport (CLT) in Charlotte, North Carolina. The goal was to familiarize pilots with the ATD-2 project, with an emphasis on procedures that may affect pilots during the Phase 1 Field Demonstration (beginning September 30, 2017). At this workshop, the high-level goals and objectives of ATD-2, expected benefits for pilots, changes to procedures, training requirements, and data sharing elements were presented.

  4. Inquiry-Based Science and Technology Enrichment Program: Green Earth Enhanced with Inquiry and Technology

    Science.gov (United States)

    Kim, Hanna

    2011-12-01

    This study investigated the effectiveness of a guided inquiry integrated with technology, in terms of female middle-school students' attitudes toward science/scientists and content knowledge regarding selective science concepts (e.g., Greenhouse Effect, Air/Water Quality, Alternative Energy, and Human Health). Thirty-five female students who were entering eighth grade attended an intensive, 1-week Inquiry-Based Science and Technology Enrichment Program which used a main theme, "Green Earth Enhanced with Inquiry and Technology." We used pre- and post-attitude surveys, pre- and post-science content knowledge tests, and selective interviews to collect data and measure changes in students' attitudes and content knowledge. The study results indicated that at the post-intervention measures, participants significantly improved their attitudes toward science and science-related careers and increased their content knowledge of selected science concepts ( p < .05).

  5. Cellulose fibers: bio- and nano-polymer composites ; green chemistry and technology

    National Research Council Canada - National Science Library

    Kalia, Susheel; Kaith, B. S; Inderjeet Kaur

    2011-01-01

    ... on eco-friendly materials, and the steps taken in this direction will lead toward GreenScience and Green-Technology. Cellulosics account for about half of the dry weight of plant biomass and approximately half of the dry weight of secondary sources of waste biomass. At this crucial moment, cellulose fibers are pushed due to their "gr...

  6. Greening the Grid - Advancing Solar, Wind, and Smart Grid Technologies (Spanish Version)

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    This is the Spanish version of 'Greening the Grid - Advancing Solar, Wind, and Smart Grid Technologies'. Greening the Grid provides technical assistance to energy system planners, regulators, and grid operators to overcome challenges associated with integrating variable renewable energy into the grid.

  7. Technology Advances at the NRAO Green Bank Telescope

    Science.gov (United States)

    Lockman, Felix James

    2015-08-01

    The 100 meter diameter Green Bank Telescope, with its large frequency coverage, great sensitivity, all-sky tracking, and location at a protected, radio-quiet site, offers a unique platform for technological advances in astronomical instrumentation that can yield an immediate scientific payoff.MUSTANG-1.5 is a feedhorn-coupled bolometer array for 3mm that has recently been installed on the telescope. It has 64 pixels (expandable to 223) and offers sensitivity to angular scales from 9" to more than 3' over a band from 75 GHz to 105 GHz. Its capabilities for science at 3mm are complimentary to, and in some cases superior to, those offered by ALMA. MUSTANG-1.5 is a collaboration between UPenn., NIST, NRAO, and other institutions.ARGUS is a 16-pixel focal plane array for millimeter spectroscopy that will be in use on the GBT in 2015. The array architecture is designed as a scalable technology pathfinder for larger arrays, but by itself it will provide major capabilities for spectroscopy from 75-107 GHz with 8" angular resolution over a wide field-of-view. It is a collaboration between Stanford Univ., Caltech, JPL, Univ. Maryland, Univ. Miami, and NRAO.FLAG is a prototype phased array receiver operating at 21cm wavelength that is under development for the GBT. It will produce multiple beams over a wide field of view with a sensitivity competitive with that of single-pixel receivers, allowing rapid astronomical surveys. FLAG is a collaboration between BYU, WVU, and NRAO.Also under development is a mm-wave phased array receiver for the GBT, designed to operate near 90 GHz as a prototype for very large format phased array receivers in the 3mm band. It is a collaboration between UMass and BYU.VEGAS is the new spectrometer for the GBT, offering multiple configurations well matched to GBT receivers from 1 to 100 GHz and suitable for use with focal plane arrays. It is a collaboration between UCal (Berkeley) and NRAO.The new receivers and spectrometers create extremely big data

  8. Research on the Implementation of Technological Measures for Controlling Indoor Environmental Quality in Green Residential Buildings

    Science.gov (United States)

    Wang, Ruozhu; Liu, Pengda; Qian, Yongmei

    2018-02-01

    This paper analyzes the design technology of controlling indoor quality in engineering practice, it is proposed that, in framework system of green residential building design, how to realize the design idea of controlling the indoor environment quality, and the design technology with feasibility, including the sunshine and lighting, indoor air quality and thermal environment, sound insulation and noise reduction measures, etc.. The results of all will provide a good theoretical supportting for the design of green residential building.

  9. In-Flight Icing Training for Pilots Using Multimedia Technology

    Science.gov (United States)

    Burke, Kevin M.; VanZante, Judith Foss; Bond, Thomas H.

    2004-01-01

    Over the last five years, the Aircraft Icing Project of the NASA Aviation Safety Program has developed a number of in-flight icing education and training aids to support increased awareness for pilots of the hazards associated with atmospheric icing conditions. Through the development of this work, a number of new instructional design approaches and media delivery methods have been introduced to enhance the learning experience, expand user interactivity and participation, and, hopefully, increase the learner retention rates. The goal of using these multimedia techniques is to increase the effectiveness of the training materials. This paper will describe the mutlimedia technology that has been introduced and give examples of how it was used.

  10. Influences of reverse outsourcing on green technological progress from the perspective of a global supply chain.

    Science.gov (United States)

    Wang, Shuhong; Song, Malin

    2017-10-01

    As a newly appeared trade mode in recent years, reverse outsourcing has made a great impact on traditional trade modes. This paper researched the influences of reverse outsourcing on green technological progress from the perspective of a global supply chain by using micro-data of enterprises. It worked out the rate of green technological progress from two innovative concepts: potential production technology and practical production technology. The empirical analysis results indicated that reverse outsourcing stimulates, and enterprise size and ownership type potentially affects, green technological progress. State-owned or foreign enterprises with high income levels would pay more attention to environmental protection, energy saving, and emission reduction, while small and micro enterprises with low incomes would choose to ignore environmental protection. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Effects of green manure crops and mulching technology on ...

    African Journals Online (AJOL)

    Green manure crops are primarily used in environmentally friendly agricultural practices to reduce the application of chemical fertilizer and herbicide. In this study, a two-year field experiment was conducted to evaluate the effects of paper and plastic mulching with hairy vetch alone or in combination with barley on weed ...

  12. A survivability model for ejection of green compacts in powder metallurgy technology

    Directory of Open Access Journals (Sweden)

    Payman Ahi

    2012-01-01

    Full Text Available Reliability and quality assurance have become major considerations in the design and manufacture of today’s parts and products. Survivability of green compact using powder metallurgy technology is considered as one of the major quality attributes in manufacturing systems today. During powder metallurgy (PM production, the compaction conditions and behavior of the metal powder dictate the stress and density distribution in the green compact prior to sintering. These parameters greatly influence the mechanical properties and overall strength of the final component. In order to improve these properties, higher compaction pressures are usually employed, which make unloading and ejection of green compacts more challenging, especially for the powder-compacted parts with relatively complicated shapes. This study looked at a mathematical survivability model concerning green compact characteristics in PM technology and the stress-strength failure model in reliability engineering. This model depicts the relationship between mechanical loads (stress during ejection, experimentally determined green strength and survivability of green compact. The resulting survivability is the probability that a green compact survives during and after ejection. This survivability model can be used as an efficient tool for selecting the appropriate parameters for the process planning stage in PM technology. A case study is presented here in order to demonstrate the application of the proposed survivability model.

  13. Green Tea Consumption Affects Cognitive Dysfunction in the Elderly: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Kazuki Ide

    2014-09-01

    Full Text Available Green tea is known to have various health benefits for humans. However, the effect of green tea consumption on cognitive dysfunction remains to be clinically verified. We conducted a clinical study to investigate the effects of green tea consumption on cognitive dysfunction. Twelve elderly nursing home residents with cognitive dysfunction (Mini-Mental State Examination Japanese version (MMSE-J score: <28 participated in the study (2 men, 10 women; mean age, 88 years. The participants consumed green tea powder 2 g/day for 3 months. After three months of green tea consumption, the participants’ MMSE-J scores were significantly improved (before, 15.3 ± 7.7; after, 17.0 ± 8.2; p = 0.03. This result suggests that green tea consumption may be effective in improving cognitive function or reducing the progression of cognitive dysfunction; however, long-term large-scale controlled studies are needed to further clarify the effect.

  14. Pilot Project Technology Business Case: Mobile Work Packages

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lawrie, Sean [ScottMadden, Inc., Raleigh, NC (United States); Niedermuller, Josef [ScottMadden, Inc., Raleigh, NC (United States)

    2015-05-01

    Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are

  15. Study on green technologies and skills of tourism enterprises in Huangshan City based on environmental protection perspective

    Science.gov (United States)

    Bao, Jun

    2018-01-01

    With the rapid development of China's economy, air pollution, environmental degradation and other ecological problems emerge in an endless stream, a great threat to human health. In this context, the ecological civilization, sustainable development, economic transformation and upgrading and other green ideas emerge as the times require, and are highly concerned by the government, enterprises, academia and the public. From the perspective of tourism enterprises, through empirical research, this paper analyzes the influencing factors of green technologies and skills in tourism enterprises, and constructs the impact mechanism model of green technologies and skills. Put forward to promote enterprises to implement green management intention, suggestions to promote the practice of green technologies and skills.

  16. Emergence of controversy in technology transitions: Green revolution and Bt cotton in India

    NARCIS (Netherlands)

    Ramani, S.V.; Thutupalli, A.

    2015-01-01

    Technology transitions following radical technological breakthroughs are often marked by controversies and the transitions to Green Revolution (GR) and Genetically Modified (GM) seeds in India were no exceptions to this rule. Controversies can trigger social dilemmas, but in economics we do not yet

  17. Problems in Acceptance of Green Technology (Green cars) in India : Practice Perception

    OpenAIRE

    Kavita Sagar

    2017-01-01

    India is still a developing country and facing issues with environment like Global Warming, Climate Changes, Air pollution etc. Almost 40% of people are suffering from cancer in India due to air pollution. We all are aware the conditions of the pollution and its hazards to health of the people. The study also focus on the urban transport along with a sustainable path in cities is the foremost need of ours. Local pollution and green house gas (GHG) emissions are of the global issues. Thus, the...

  18. Environmental sustainability assessment of family house alternatives and application of green technologies

    Science.gov (United States)

    Moňoková, A.; Vilčeková, S.; Mečiarová, Ľ.; Krídlová Burdová, E.

    2017-10-01

    Transition to environmentally friendly technologies provides a comprehensive solution to problem of creating an economic value without destroying the nature. Buildings using green technologies lead to lower operating costs, healthier living and working environment and protect the environment more. The aim of this paper is to assess the environmental impact of two alternatives of family house designed as conventional building and building with green technologies. Evaluated family house are located in village Kokšov Bakša, which is situated 12 km south-east from city of Košice, a metropolis of eastern Slovakia. This analysis investigates the role of applied green technologies in single family houses for impact categories: global warming potential (GWP), acidification potential (AP) and eutrophication potential (EP) expressed as CO2eq, SO2eq and PO4 3- eq within “Cradle to Grave” boundary by using the LCA assessment method. The main contribution of the study is a proof that green technologies have significant part in the reduction of environmental impacts. Results show that alternative of family house designed as green one contributes to CO2eq, SO2eq and PO4 3- eq emissions by 81%, 73% and 35% less than alternative of conventional family house, respectively.

  19. Organisational change and the productivity effects of green technology adoption

    OpenAIRE

    Hottenrott, Hanna; Rexhäuser, Sascha; Veugelers, Reinhilde

    2016-01-01

    This study investigates induced productivity effects of firms introducing new environmental technologies. The literature on within-firm organisational change and productivity suggests that firms can achieve higher productivity gains from adopting new technologies if they adapt their organisational structures. Such complementarity effects may be of particular importance for the adoption of greenhouse gas (GHG) abatement technologies. The adoption of these technologies is often induced by publi...

  20. green

    Directory of Open Access Journals (Sweden)

    Elena Grigoryeva

    2011-02-01

    Full Text Available The “green” topic follows the “youngsters”, which is quite natural for the Russian language.Traditionally these words put together sound slightly derogatory. However, “green” also means fresh, new and healthy.For Russia, and for Siberia in particular, “green” architecture does sound new and fresh. Forced by the anxious reality, we are addressing this topic intentionally. The ecological crisis, growing energy prices, water, air and food deficits… Alexander Rappaport, our regular author, writes: “ It has been tolerable until a certain time, but under transition to the global civilization, as the nature is destroyed, and swellings of megapolises expand incredibly fast, the size and the significance of all these problems may grow a hundredfold”.However, for this very severe Siberian reality the newness of “green” architecture may turn out to be well-forgotten old. A traditional Siberian house used to be built on principles of saving and environmental friendliness– one could not survive in Siberia otherwise.Probably, in our turbulent times, it is high time to fasten “green belts”. But we should keep from enthusiastic sticking of popular green labels or repainting of signboards into green color. We should avoid being drowned in paper formalities under “green” slogans. And we should prevent the Earth from turning into the planet “Kin-dza-dza”.

  1. The Atrial Fibrillation Health Literacy Information Technology System: Pilot Assessment.

    Science.gov (United States)

    Magnani, Jared W; Schlusser, Courtney L; Kimani, Everlyne; Rollman, Bruce L; Paasche-Orlow, Michael K; Bickmore, Timothy W

    2017-01-01

    Atrial fibrillation (AF) is a highly prevalent heart rhythm condition that has significant associated morbidity and requires chronic treatment. Mobile health (mHealth) technologies have the potential to enhance multiple aspects of AF care, including education, monitoring of symptoms, and encouraging and tracking medication adherence. We have previously implemented and tested relational agents to improve outcomes in chronic disease and sought to develop a smartphone-based relational agent for improving patient-centered outcomes in AF. The objective of this study was to pilot a smartphone-based relational agent as preparation for a randomized clinical trial, the Atrial Fibrillation Health Literacy Information Technology Trial (AF-LITT). We developed the relational agent for use by a smartphone consistent with our prior approaches. We programmed the relational agent as a computer-animated agent to simulate a face-to-face conversation and to serve as a health counselor or coach specific to AF. Relational agent's dialogue content, informed by a review of literature, focused on patient-centered domains and qualitative interviews with patients with AF, encompassed AF education, common symptoms, adherence challenges, and patient activation. We established that the content was accessible to individuals with limited health or computer literacy. Relational agent content coordinated with use of the smartphone AliveCor Kardia heart rate and rhythm monitor. Participants (N=31) were recruited as a convenience cohort from ambulatory clinical sites and instructed to use the relational agent and Kardia for 30 days. We collected demographic, social, and clinical characteristics and conducted baseline and 30-day assessments of health-related quality of life (HRQoL) with the Atrial Fibrillation Effect on Quality of life (AFEQT) measure; self-reported medication adherence with the Morisky 8-item Medication Adherence Scale (MMAS-8); and patient activation with the Patient Activation

  2. Sustainable Public Procurement of Medical Technology and Green Logistics

    DEFF Research Database (Denmark)

    Vettorato, Giovanna; Hsuan, Juliana

    This paper investigates design for remanufacture in terms of both detailed new product design and the environmental performance in which modularization and reversed production may operate. We examine the medical equipment industry and their potential contributions to the implementation of green...... supply chain in the healthcare sector. An exploratory case study of medical equipment supply chain is presented when considering the life cycle of the product can be managed through the modularization strategies. Preliminary findings indicate that design-for-disassembly of modules make equipment easier...

  3. Technology-neutral green procurement in practice - an example from Swedish waste management.

    Science.gov (United States)

    Arvidsson, Anders; Stage, Jesper

    2012-05-01

    Green public procurement has been criticized for its excessive reliance on detailed technology specifications, which can distort incentives in the short term and discourage innovation in the longer term. Economists therefore tend to prefer technology-neutral procurement, which rewards outcomes rather than technologies. However, technology-neutral procurement can also be problematic in practice. The present study investigated green public procurement of waste management, a rapidly growing field. In one of the most sophisticated models for technology-neutral procurement applied in Sweden in recent years, different environmental impacts were assigned weights, but no weight was given to the particular technology employed. Even here, however, potential inefficiencies were found where the scoring rule could have led to arbitrary, and presumably unwanted, outcomes. Explicitly assigning monetary surcharges to desirable and undesirable environmental effects may be a better way to reach environmental targets.

  4. A Duopoly Manufacturers’ Game Model Considering Green Technology Investment under a Cap-and-Trade System

    Directory of Open Access Journals (Sweden)

    Yi Zheng

    2018-03-01

    Full Text Available This research studied the duopoly manufacturers’ decision-making considering green technology investment and under a cap-and-trade system. It was assumed there were two manufacturers producing products which were substitutable for one another. On the basis of this assumption, the optimal production capacity, price, and green technology investment of the duopoly manufacturers under a cap-and-trade system were obtained. The increase or decrease of the optimal production quantity of the duopoly manufacturers under a cap-and-trade system was decided by their green technology level. The increase of the optimal price as well as the increase or decrease of the maximum expected profits were decided by the initial carbon emission quota granted by the government. Our research indicates that the carbon emission of unit product is inversely proportional to the market share of an enterprise and becomes an important index to measure the core competitiveness of an enterprise.

  5. Priority survey between indicators and analytic hierarchy process analysis for green chemistry technology assessment.

    Science.gov (United States)

    Kim, Sungjune; Hong, Seokpyo; Ahn, Kilsoo; Gong, Sungyong

    2015-01-01

    This study presents the indicators and proxy variables for the quantitative assessment of green chemistry technologies and evaluates the relative importance of each assessment element by consulting experts from the fields of ecology, chemistry, safety, and public health. The results collected were subjected to an analytic hierarchy process to obtain the weights of the indicators and the proxy variables. These weights may prove useful in avoiding having to resort to qualitative means in absence of weights between indicators when integrating the results of quantitative assessment by indicator. This study points to the limitations of current quantitative assessment techniques for green chemistry technologies and seeks to present the future direction for quantitative assessment of green chemistry technologies.

  6. Alternative Green Technology for Power Generation Using Waste-Heat Energy And Advanced Thermoelectric Materials, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is interested in advancing green technology research for achieving sustainable and environmentally friendly energy sources for both terrestrial and space...

  7. Alternative Green Technology for Power Generation Using Waste-Heat Energy And Advanced Thermoelectric Materials, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is interested in advancing green technology research for achieving sustainable and environmentally friendly energy sources. Thermo-electric power generation...

  8. Preparation of tyrosinase inhibitors and antibrowning agents using green technology.

    Science.gov (United States)

    Dong, Xue; Zhang, Yinan; He, Jia-Liang; Zhang, Shuang; Zeng, Mao-Mao; Chen, Jie; Zheng, Zong-Ping

    2016-04-15

    Chalcones and their derivatives have attracted great interests in recent years for their comprehensive biological activities. In this study, 2,4,2',4'-tetrahydroxychalcone and its two derivatives, 1,3,5-tris-(2,4-dihydroxy-phenyl)pentane-1,5-dione (new compound) and 7,2',4'-trihydroxyflavanone, were synthesized through one-pot green procedure catalyzed by boric acid in polyethylene glycol 400. Their structures were identified by ESI-MS and NMR spectral. Tyrosinase inhibitory activity and antibrowning test results showed that compounds 1-3 exhibited strong tyrosinase inhibitory activities and significant antibrowning effects on the fresh-cut lotus root slices at room temperature in 48 h. Among them, 0.01% 1,3,5-tris-(2,4-dihydroxy-phenyl)pentane-1,5-dione combined with 0.5% VC showed the best antibrowning ability. In brief, this study offers a protocol for one-pot green synthesis of high efficiency tyrosinase inhibitors which may be suitable as antibrowning agents for fresh-cut vegetables. More important, this study developed a new type of 1,5-dione derivative which may serve as new lead structures for novel tyrosinase inhibitors discovery. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Application of BIM technology in green scientific research office building

    Science.gov (United States)

    Ni, Xin; Sun, Jianhua; Wang, Bo

    2017-05-01

    BIM technology as a kind of information technology, has been along with the advancement of building industrialization application in domestic building industry gradually. Based on reasonable construction BIM model, using BIM technology platform, through collaborative design tools can effectively improve the design efficiency and design quality. Vanda northwest engineering design and research institute co., LTD., the scientific research office building project in combination with the practical situation of engineering using BIM technology, formed in the BIM model combined with related information according to the energy energy model (BEM) and the application of BIM technology in construction management stage made exploration, and the direct experience and the achievements gained by the architectural design part made a summary.

  10. Economic versus belief-based models: Shedding light on the adoption of novel green technologies

    International Nuclear Information System (INIS)

    Girod, Bastien; Mayer, Sebastian; Nägele, Florian

    2017-01-01

    Understanding the determinants for the adoption of novel green consumer technologies is important to effectively foster their diffusion. Energy and environmental science literature often takes an approach based on economic variables such as objectively measureable household and technology characteristics. Increasingly, also subjective variables based on personal belief are considered. On the basis of a survey about the intention to adopt an exemplary novel green consumer technology (intelligent thermostats), we contribute to the clarification of the explanatory power of these two approaches. We first compare the economic model to the belief-based model and second, investigate how beliefs about the green technology are influenced by personal environmental norms and innovativeness. Our evaluation shows that the belief-based model explains considerably higher variance in the intention to adopt. Thereby the perceived hedonic satisfaction, usefulness, habit and facilitating conditions reveal as key determinants. Moreover, environmental norms show lower impact than personal innovativeness. In the discussion we consolidate these findings and point to the risk of omitted variable bias when selectively including belief-based variables in adoption models. Our findings suggest that policies can effectively accelerate the early market diffusion of green consumer technologies by incentivizing retailers to introduce and market such technologies. - Highlights: • Adoption of a green consumer technology (energy-saving thermostats) is evaluated. • Subjective beliefs about the technology show higher impact than objective measures. • Key beliefs relate to pleasure, usefulness, habits and facilitating conditions. • Personal innovativeness is more relevant for adoption than environmental norms. • Isolated use of belief-based adoption determinants can lead to omitted variable bias.

  11. Green telecom technology (GCT): think green - a step to achieve improved techno-environmental and socio-economic effects in Pakistan

    International Nuclear Information System (INIS)

    Anwar, C.M.

    2010-01-01

    The purpose of this research is development of know-how about the worldwide techno- environmental effects of telecom/lCT industry and proposal of a strategy to cope with this hazardous issue. Our main focus is to develop a strategy to minimize the pollution-level (Energy-consumption, Waste, Green-House Gases (GHG) emission, including CO/sub 2/) in the environment produced by telecom/lCT industry of Pakistan. We want to save our environment by introducing not only environment-friendly Green Telecom Technology (GTT), but our main theme is to convert the thinking of our carriers and public from black to green technologies. We shall analyze the socio-economic effects of going green. This research also suggests the concept of green-tax to government, which could be helpful to increase government equity. (author)

  12. Green Remediation Best Management Practices: Pump and Treat Technologies

    Science.gov (United States)

    The U.S. EPA Principles for Greener Cleanups outline the Agency's policy for evaluating and minimizing the environmental 'footprint' of activities undertaken when cleaning up a contaminated site with pump and treat technologies.

  13. Green Remediation Best Management Practices: Implementing In Situ Thermal Technologies

    Science.gov (United States)

    Over recent years, the use of in situ thermal technologies such as electrical resistance heating, thermal conductive heating, and steam enhanced extraction to remediate contaminated sites has notably increased.

  14. Lightweight Pump Technology for Advanced Green Monopropellants, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Systima will develop an innovative light weight self-pressurizing pump (SPP) technology to provide a constant-pressure supply of monopropellant to a spacecraft or...

  15. Accelerating the green agenda through innovative building technologies

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2015-08-01

    Full Text Available facilities. However, the delivery process associated with conventional building technologies, i.e., brick and mortar, is slow due, in large part, to the technology requirements (diverse and plentiful building systems, products and components assembled... in countries that have a tradition of brick and mortar construction. However the market penetration of IBT is increasing in the latter markets in response to the pressures emanating from raw materials scarcity, the demand for higher performing buildings...

  16. EPA’s Summary Report of the Collaborative Green Infrastructure Pilot Project for the Middle Blue River in Kansas City, MO

    Science.gov (United States)

    The United States Environmental Protection Agency evaluated the performance of a hybrid green-gray infrastructure pilot project installed into the Marlborough Neighborhood by the Kansas City Water Services Department. Kansas City installed 135 vegetated SCMs, 24,290 square feet o...

  17. PRELIMINARY EVALUATION OF SPIROTOME® DEVICE FOR LIVER BIOPSY IN GREEN IGUANAS (IGUANA IGUANA): A PILOT STUDY.

    Science.gov (United States)

    Nardini, Giordano; Origgi, Francesco C; Leopardi, Stefania; Zaghini, Anna; Saunders, Jimmy H; Vignoli, Massimo

    2016-06-01

    The aim of this study was to evaluate a large-core manual biopsy device (Spirotome(®), Medinvents, 3500 Hasselt, Belgium) for liver sampling and histologic diagnosis in green iguanas (Iguana iguana). The study included eight green iguanas, and two ultrasound-guided biopsies were collected for each lizard, for 16 biopsies in total. The procedure was carried out under general anesthesia induced by intravenous injection of propofol (10 mg/kg) maintained with a mixture of 2.0% isoflurane and 0.8-1.2 L/min oxygen after tracheal intubation. Fourteen (87.5%) of the 16 biopsies were considered diagnostic. Liver biopsy quality was assessed according to sample size and tissue preservation. In particular, mean length (16.2 ± 4.5 mm), width (2.2 ± 0.5 mm), area (34.8 ± 6.9 mm(2)), and number of portal areas (9.4 ± 3.9) of each biopsy were recorded for all green iguanas. The total available surface of the sections obtained from the biopsies and their grade of preservation enabled a satisfactory evaluation of the parenchymal architecture. One of the green iguanas in the study died the day after the procedure due to severe hemocoeloma. Risk assessment evaluation suggested that small green iguanas may not be suitable for this biopsy procedure.

  18. Connecticut warm mix asphalt (WMA) pilot projects 2010 and 2011.

    Science.gov (United States)

    2014-06-01

    WMA overlays were placed in several pilot projects in Connecticut during the 2010 and 2011 construction : seasons. These technologies included Sasobit, Evotherm, Advera, Double-Barrel Green foamed : asphalt as well as SonneWarmix. The res...

  19. Green roofs as contributors for water management schemes within urban areas – a pilot study in Porto

    OpenAIRE

    Monteiro, C. M.; Calheiros, C. S. C.; Pimentel-Rodrigues, C.; Palha, P.; Silva-Afonso, A.; Castro, P. M. L.

    2016-01-01

    Water scarcity is an issue of worldwide concern and a holistic approach to water management is needed to overcome the potential threats that climate change brings to water availability and security in many parts of the globe. Societal and economic challenges need to be addressed when implementing technological solutions to environmental problems. The fact that green areas in the cities have been reduced and replaced by impervious buildings and paved streets has caused a number of problems, su...

  20. Proceedings of the Indian Analytical Science Congress: analytical science for innovations in green energy, technology and industry - souvenir

    International Nuclear Information System (INIS)

    2013-01-01

    The theme of IASC - 2013 is 'Analytical Science for innovations in Green Energy, Technology and Industry'. This theme was chosen to emphasize the unprecedented opportunities for analytical science and technology in the field of green energy, technology and industry, while at the same time recognizing the special challenges faced by analytical science in this field. The objective of the conference is to advance research, development and innovation in analytical sciences for the benefit of its application in the areas of green science and technology. The growing role of analytical science in green energy, technology and industry are significant. The next few years will witness more momentous achievements of analytical science as well as its application in green energy, technology and industry contributing towards the benefit of mankind in terms of healthy, productive, long and comfortable life. Papers relevant to INIS are indexed separately

  1. Aircraft Engine Technology for Green Aviation to Reduce Fuel Burn

    Science.gov (United States)

    Hughes, Christopher E.; VanZante, Dale E.; Heidmann, James D.

    2013-01-01

    The NASA Fundamental Aeronautics Program Subsonic Fixed Wing Project and Integrated Systems Research Program Environmentally Responsible Aviation Project in the Aeronautics Research Mission Directorate are conducting research on advanced aircraft technology to address the environmental goals of reducing fuel burn, noise and NOx emissions for aircraft in 2020 and beyond. Both Projects, in collaborative partnerships with U.S. Industry, Academia, and other Government Agencies, have made significant progress toward reaching the N+2 (2020) and N+3 (beyond 2025) installed fuel burn goals by fundamental aircraft engine technology development, subscale component experimental investigations, full scale integrated systems validation testing, and development validation of state of the art computation design and analysis codes. Specific areas of propulsion technology research are discussed and progress to date.

  2. Biogas and BioFertilizer Production Using Green Technology

    International Nuclear Information System (INIS)

    Sirirote, Pramote

    2010-01-01

    Basically, it is technology which created and used in a way that conserves natural resources and the environment. This technology also can be environmental friendly because the use of this technology is supposed to reduce the amount of waste and pollution that is created during production and consumption. These food wastes will come from animal bone, crab skeleton, fish skeleton, rice, noodle, vegetable and others. We collect all of these wastes and then keep it in plants, and then we make sure that this waste will turn into biogas via anaerobic digestion. All of these involved hydrolysis, fermentation, aceto genesis and methano genesis process. Methane that produced will be used in biomass plant to generate electricity. Meanwhile bio fertilizer that produced will be applied on agriculture sectors as fertilizer for plants.

  3. Green technologies for the environmental upgrading of infrastructures

    Directory of Open Access Journals (Sweden)

    Alessandra Battisti

    2013-05-01

    Full Text Available Over the last few decades, the globalization phenomenon has determined the exponential development - from an economic, cultural and political standpoint - of traffic flows, the number of means and infrastructures involved in communication and exchange. At the same time, these represent one of the most complicated environmental issues of contemporary times, but perhaps also one of the most outstanding opportunities for setting up processes aimed at upgrading the territory and its constructions, towards environmental regeneration and social reorganization. These, in turn, would produce and spread (as in some already established examples of infrastructure upgrading innovative and more sustainable forms of urban lifestyles. The present contribution aims at illustrating the former, beginning with research and experiments involving the development of eco-friendly meta-design models for the correct employment of “green technologies” in: meta-project research for small mobility facilities; expansion and redevelopment works for the Stazione Termini; experiments in design for some energy-efficient underground metro stops in Rome.

  4. Technological Advances in Huanglongbing (HLB or Citrus Greening Disease Management

    Directory of Open Access Journals (Sweden)

    Krishna Prasad Paudyal

    2015-12-01

    Full Text Available Huanglongbing (HLB, previously citrus greening disease, is the most destructive of citrus species causing major threat to the world citrus industry. The disease was reported from China in 1919 and now known to occur in more than 40 different countries of Asia, Africa, South and North America. Three species of gram negative bacterium namely Candidatus Liberibacter asiaticus, Candidatus Liberibacter africanus and Candidatus Liberibacter americanus are the casual organisms of HLB, respectively prevailing in the continent of Asia, Africa and South America. It is one of the most extensively researched subjects in citriculture world. HLB was detected in 2004 and 2005, respectively in San Paulo of Brazil and Florida of USA: the two leading citrus production hub of the world causing huge economic loss within 5 years of first detection. Since then research on HLB detection and management was further accelerated in American continents. This paper presents the scientific advancement made on detection, spread, economic losses caused by HLB in different parts of the world and controlling management strategies. Remarkable achievements have been made on HLB detection techniques including iodine test, qPCR and more recently in spectroscopy. While efforts are being made to develop resistance varieties using conventional and biotechnological tools management strategy which includes reduction of inoculums source, vector control and replant with disease-free planting materials still remains major option for HLB control. Citrus intercropping with guava have shown promising results for vector reduction.

  5. Chemistry of Stable Carbenes and «Green» Technologies

    Directory of Open Access Journals (Sweden)

    Korotkikh, N.I.

    2015-11-01

    Full Text Available Brief analysis of fundamental research in the chemistry of stable carbenes and applications in the field of «green» chemistry on their basis carried out at the L.M. Litvinenko Institute of Physical Organic & Coal Chemistry of NAS of Ukraine over the last decade is given. Carbene versions of ester Claisen condensation to form zwitterionic compounds, the Leuckart-Wallach reaction with the autoreduction of carbenoid azolium salts, Hofmann cleavage of aminocarbene insertion products, an induced tandem autotransformation of 1,2,4-triazol-5-ylidenes into 5-amidino-1,2,4-triazoles were found. New carbene reactions of ad dition, deesterification, oxidation and complexation were revealed. Effective methods of obtaining stable carbenes and carbenoids were suggested. New types of carbenes, namely benzimidazolylidenes, superstable conjugated biscarbenes and new types of carbenoids were synthesized. The existence of hypernucleophilic carbenes was theoretically predicted and experimentally confirmed. The prospects of the use of carbenes and their derivatives, in particular, carbene complexes of transition metals in catalysis of organic reactions and the search of biologically active compounds were shown.

  6. Green Plate-making Technology Based on Nanomaterials

    Institute of Scientific and Technical Information of China (English)

    SONG Yanlin

    2011-01-01

    @@ Movable type printing technology is one of the four great inventions of ancient China which played a significant role in passing down the history and civilization of human society.Today, with economic development and people's diverse needs for presswork, printing has penetrated into all spheres of life, and the printing industry has become one of the industries that have important impacts on China's national economy.Since China is now the third largest printing market in the world, the rapid development of this huge market calls for digital plate-making technologies for the sake of environmental protection.

  7. Radiation curing--new technology of green industries facing 21st century

    International Nuclear Information System (INIS)

    Wang Jianguo; Teng Renrui

    2000-01-01

    The development of radiation curing was simply reviewed and the mechanism of UV curing and EB curing, the equipment and materials used in the radiation curing were also introduced. Compared with ordinary curing, the radiation curing has advantages of energy saving, high effectiveness and little pollution. It is a new technology of green industries facing the 21st century

  8. A Classical Delphi Study to Identify the Barriers of Pursuing Green Information and Communication Technologies

    Science.gov (United States)

    Gotay, Jose Antonio

    2013-01-01

    This qualitative, classical Delphi study served to explore the apparent lack of corporate commitment to prioritized Green Information Communication Technologies (ICTs), which could delay the economic and social benefits for maximizing the use of natural energy resources in a weak economy. The purpose of this study was to examine the leadership…

  9. Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis

    Directory of Open Access Journals (Sweden)

    Flavio Fanelli

    2017-03-01

    Full Text Available Microreactor technology and flow chemistry could play an important role in the development of green and sustainable synthetic processes. In this review, some recent relevant examples in the field of flash chemistry, catalysis, hazardous chemistry and continuous flow processing are described. Selected examples highlight the role that flow chemistry could play in the near future for a sustainable development.

  10. Contribution of microreactor technology and flow chemistry to the development of green and sustainable synthesis.

    Science.gov (United States)

    Fanelli, Flavio; Parisi, Giovanna; Degennaro, Leonardo; Luisi, Renzo

    2017-01-01

    Microreactor technology and flow chemistry could play an important role in the development of green and sustainable synthetic processes. In this review, some recent relevant examples in the field of flash chemistry, catalysis, hazardous chemistry and continuous flow processing are described. Selected examples highlight the role that flow chemistry could play in the near future for a sustainable development.

  11. Update on Kansas City Middle Blue River Green Infrastructure Pilot Project

    Science.gov (United States)

    In 2010, Kansas City, MO (KCMO) signed a consent degree with EPA on combined sewer overflows. The City decided to use adaptive management in order to extensively utilize green infrastructure (GI) in lieu of, and in addition to, gray structural controls. KCMO installed 130 GI sto...

  12. Update on Kansas City Middle Blue River Green Infrastructure Pilot Project - seminar

    Science.gov (United States)

    In 2010, Kansas City, MO (KCMO) signed a consent degree with EPA on combined sewer overflows. The City decided to use adaptive management in order to extensively utilize green infrastructure (GI) in lieu of, and in addition to, structural controls. KCMO installed 130 GI storm con...

  13. Comparison of Modeled Results for Kansas City Middle Blue River Green Infrastructure Pilot Project

    Science.gov (United States)

    The Water Services Department (WSD) in Kansas City, Missouri (KCMO) has conducted extensive modeling and economic studies of its combined sewer system (CSS) over the last several years. A number of green infrastructure (GI) solutions were identified and constructed to reduce dis...

  14. Phenolic compounds of green tea: Health benefits and technological application in food

    Directory of Open Access Journals (Sweden)

    José Manuel Lorenzo

    2016-08-01

    Full Text Available Green tea has been an important beverage for humans since ancient times, widely consumed and considered to have health benefits by traditional medicine in Asian countries. Green tea phenolic compounds are predominately composed of catechin derivatives, although other compounds such as flavonols and phenolic acids are also present in lower proportion. The bioactivity exerted by these compounds has been associated with reduced risk of severe illnesses such as cancer, cardiovascular and neurodegenerative diseases. Particularly, epigallocatechin gallate has been implicated in alteration mechanisms with protective effect in these diseases as indicated by several studies about the effect of green tea consumption and mechanistic explanation through in vitro and in vivo experiments. The biological activity of green tea phenolic compounds also promotes a protective effect by antioxidant mechanisms in biological and food systems, preventing the oxidative damage by acting over either precursors or reactive species. Extraction of phenolic compounds influences the antioxidant activity and promotes adequate separation from green tea leaves to enhance the yield and/or antioxidant activity. Application of green tea phenolic compounds is of great interest because the antioxidant status of the products is enhanced and provides the product with additional antioxidant activity or reduces the undesirable changes of oxidative reactions while processing or storing food. In this scenario, meat and meat products are greatly influenced by oxidative deterioration and microbial spoilage, leading to reduced shelf life. Green tea extracts rich in phenolic compounds have been applied to increase shelf life with comparable effect to synthetic compounds, commonly used by food industry. Green tea has great importance in general health in technological application, however more studies are necessary to elucidate the impact in pathways related to other diseases and food

  15. Green solvents and technologies for oil extraction from oilseeds

    OpenAIRE

    Kumar, S. P. Jeevan; Prasad, S. Rajendra; Banerjee, Rintu; Agarwal, Dinesh K.; Kulkarni, Kalyani S.; Ramesh, K. V.

    2017-01-01

    Oilseeds are crucial for the nutritional security of the global population. The conventional technology used for oil extraction from oilseeds is by solvent extraction. In solvent extraction, n-hexane is used as a solvent for its attributes such as simple recovery, non-polar nature, low latent heat of vaporization (330?kJ/kg) and high selectivity to solvents. However, usage of hexane as a solvent has lead to several repercussions such as air pollution, toxicity and harmfulness that prompted to...

  16. The role of exergy in increasing utilization of green energy and technologies. Paper no. IGEC-1-Keynote-Rosen

    International Nuclear Information System (INIS)

    Rosen, M.A.

    2005-01-01

    The use of exergy is described as a measure for identifying and explaining the benefits of green energy and technologies, so the benefits can be clearly understood and appreciated by experts and non-experts alike, and the utilization of green energy and technologies can be increased. Exergy can be used to assess and improve energy systems, and can help better understand the benefits of utilizing green energy by providing more useful and meaningful information than energy provides. Exergy clearly identifies efficiency improvements and reductions in thermodynamic losses attributable to green technologies. Exergy can also identify better than energy the environmental benefits and economics of energy technologies. Exergy should be utilized to engineers and scientists, as well as decision and policy makers, involved in green energy and technologies. (author)

  17. ‘Better late than never’: the interplay between green technology and age for firm growth

    OpenAIRE

    Leoncini, Riccardo; Marzucchi, Alberto; Montresor, Sandro; Rentocchini, Francesco; Rizzo, Ugo

    2017-01-01

    This paper investigates the relationship between green/non-green technologies and firm growth. By combining the literature on eco-innovations, industrial organisation and entrepreneurial studies, we examine the dependence of this relationship on the pace at which firms grow and the age of the firm. From a dataset of 5498 manufacturing firms in Italy for the period of 2000–2008, longitudinal fixed effects quantile models are estimated, in which the firm’s age is set to moderate the effects of ...

  18. Integrated Modelling and Performance Analysis of Green Roof Technologies in Urban Environments

    Science.gov (United States)

    Liu, Xi; Mijic, Ana; Maksimovic, Cedo

    2014-05-01

    As a result of the changing global climate and increase in urbanisation, the behaviour of the urban environment has been significantly altered, causing an increase in both the frequency of extreme weather events, such as flooding and drought, and also the associated costs. Moreover, uncontrolled or inadequately planned urbanisation can exacerbate the damage. The Blue-Green Dream (BGD) project therefore develops a series of components for urban areas that link urban vegetated areas (green infrastructure) with existing urban water (blue) systems, which will enhance the synergy of urban blue and green systems and provide effective, multifunctional BGD solutions to support urban adaptation to future climatic changes. Coupled with new urban water management technologies and engineering, multifunctional benefits can be gained. Some of the technologies associated with BGD solutions include green roofs, swales that might deal with runoff more effectively and urban river restoration that can produce benefits similar to those produced from sustainable urban drainage systems (SUDS). For effective implementation of these technologies, however, appropriate tools and methodologies for designing and modelling BGD solutions are required to be embedded within urban drainage models. Although several software packages are available for modelling urban drainage, the way in which green roofs and other BGD solutions are integrated into these models is not yet fully developed and documented. This study develops a physically based mass and energy balance model to monitor, test and quantitatively evaluate green roof technology for integrated BGD solutions. The assessment of environmental benefits will be limited to three aspects: (1) reduction of the total runoff volume, (2) delay in the initiation of runoff, and (3) reduction of building energy consumption, rather than water quality, visual, social or economic impacts. This physically based model represents water and heat dynamics in a

  19. Integrated green algal technology for bioremediation and biofuel.

    Science.gov (United States)

    Sivakumar, Ganapathy; Xu, Jianfeng; Thompson, Robert W; Yang, Ying; Randol-Smith, Paula; Weathers, Pamela J

    2012-03-01

    Sustainable non-food energy biomass and cost-effective ways to produce renewable energy technologies from this biomass are continuously emerging. Algae are capable of producing lipids and hydrocarbons quickly and their photosynthetic abilities make them a promising candidate for an alternative energy source. In addition, their favorable carbon life cycle and a renewed focus on rural economic development are attractive factors. In this review the focus is mainly on the integrated approach of algae culture for bioremediation and oil-based biofuel production with mention of possible other value-added benefits of using algae for those purposes. Published by Elsevier Ltd.

  20. Women in Science and Technology: A Global Development Leadership Pilot Scheme

    Science.gov (United States)

    Turnbull, Sarah; Howe-Walsh, Liza; Shute, Janis

    2014-01-01

    In 2012 The University of Portsmouth piloted their first Global Development Leadership program for women in Science and Technology faculties. This was seen to be particularly important because of the wider under-representation of women in Science, Technology, Engineering and Maths (STEM) and the need to encourage more women into senior positions…

  1. National priorities for the assessment of clinical conditions and medical technologies: report of a pilot study

    National Research Council Canada - National Science Library

    Lara, María Elena; Goodman, Clifford

    1990-01-01

    ... and Medical Technologies Report of a Pilot Study Maria Elena Lara and Clifford Goodman, editors Priority-Setting Group Council on Health Care Technology Institute of Medicine NATIONAL ACADEMY PRESS WASHINGTON, D.C. 1990 i Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typese...

  2. NASA Green Flight Challenge: Conceptual Design Approaches and Technologies to Enable 200 Passenger Miles per Gallon

    Science.gov (United States)

    Wells, Douglas P.

    2011-01-01

    The Green Flight Challenge is one of the National Aeronautics and Space Administration s Centennial Challenges designed to push technology and make passenger aircraft more efficient. Airliners currently average around 50 passenger-miles per gallon and this competition will push teams to greater than 200 passenger-miles per gallon. The aircraft must also fly at least 100 miles per hour for 200 miles. The total prize money for this competition is $1.65 Million. The Green Flight Challenge will be run by the Comparative Aircraft Flight Efficiency (CAFE) Foundation September 25 October 1, 2011 at Charles M. Schulz Sonoma County Airport in California. Thirteen custom aircraft were developed with electric, bio-diesel, and other bio-fuel engines. The aircraft are using various technologies to improve aerodynamic, propulsion, and structural efficiency. This paper will explore the feasibility of the rule set, competitor vehicles, design approaches, and technologies used.

  3. Enterococci Isolated from Cypriot Green Table Olives as a New Source of Technological and Probiotic Properties

    Directory of Open Access Journals (Sweden)

    Dimitrios A. Anagnostopoulos

    2018-06-01

    Full Text Available Τable olive is one of the main fermented vegetable worldwide and can be processed as treated or natural product. Lactic Acid Bacteria (LAB are responsible for the fermentation of treated olives. The aim of this work was to study the technological characteristics and the potential probiotic properties of LAB isolated from Cypriot green table olives. This is the first comprehensive report on the isolation and characterization of LAB isolates retrieved from Cypriot green table olives. From a collection of 92 isolates from spontaneously fermenting green olives, 64 g positive isolates were firstly identified to genus level using biochemical tests, and secondly to species level using multiplex species specific polymerase chain reaction (PCR amplifications of the sodA gene. Moreover, each of our isolates were tested for their technological and probiotics properties, as well as for their safety characteristics, using biochemical and molecular methods, in order to be used as starter cultures. Finally, to discriminate the most promising isolates on the base of their technological and probiotics properties, Principal component analysis was used. All the isolates were identified as Enteroccocus faecium, having interesting technological properties, while pathogenicity determinants were absent. Principal component analysis showed that some isolates had a combination of the tested parameters. These findings demonstrate that enteroccoci from Cypriot table olives should be considered as a new source of potential starter cultures for fermented products, having possibly promising technological and probiotic attributes.

  4. Biochar Technology as a Go Green Movement in Indonesia

    Directory of Open Access Journals (Sweden)

    Gustan Pari

    2016-02-01

    Full Text Available Charcoal has long been known by the community in its use either as energy sources or for agriculture/forestry-related aspects.  Beginning from the discovery of the so-called Terra Preta, the role of charcoal in improving soil fertility and enhancing its productivity at agriculture as well as forestry lands has attracted remarkable attention internationally ever since.  Raw material for charcoal can be wood or other ligno-cellulosic stuffs (e.g. coconut shells, oil-palm shells, rice husks, wood sawdust, nut shells, etc.  Technology in charcoal manufacture commonly employed by the community comprises heaping-kiln, drum kiln, and dome-shaped kiln systems.  Such manufacture technology is simply carbonizing the ligno-cellulosic stuffs inside the kiln into charcoal.  The charcoal yield usually ranges about 20-25% (w/w, implying that as much 75-80% of the stuffs is lost as smoke that further escape to the air.  Environment concerns arise since such escaped smoke can pollute the atmosphere and hence contribute to the global warming.  Measures are urgently needed to reduce the amount of such escapes among others, as developed by the Center for Research and Development on Forestry Engineering and Forest Products Processing (CRDFEFPP, Indonesia by cooling the smoke, during the carbonization of ligno-cellulosic stuffs, thereby condensing it into liquid smoke (popularly called as wood vinegar. Through intensive and tedious researches, it is found out that the wood vinegar (as charcoal by-product could effectively function as bio-pesticides and bio-fertilizers.  Meanwhile, application of charcoal to the seedlings of forestry plant species reveals positive responses as shown by the increase in biomass weight of those plants on other positive plant-growth aspects (e.g. stem height and diameter.  Likewise, the use of charcoal combined with compost (i.e. organic fertilizer that results from bio-conversion of biomass stuffs could enhance as much 2-3 times

  5. Survey of Education, Engineering, and Information Technology Students Knowledge of Green Computing in Nigerian University

    Directory of Open Access Journals (Sweden)

    Tajudeen Ahmed Shittu

    2016-02-01

    Full Text Available The use of computer system is growing rapidly and there is growing concern on the environmental hazard associated with its use. Thus, the need for every user’s to possess the knowledge of using computer in an environmental friendly manner.  This study therefore, investigated the knowledge of green computing possessed by university students in Nigeria. To achieve this, survey method was employed to carry out the study. The study involved students from three schools (Computer Science, Engineering, and Education. Purposive sampling method was used to draw three hundred (300 respondents that volunteer to answer the questionnaire administered for gathering the data of the study. The instrument used was adapted but modify and subjected to pilot testing to ascertain its validity and internal consistency. The reliability of the instrument showed a .75 Cronbach alpha level.  The first research question was answer with descriptive statistic (perecentage.  T-test and ANOVA was used to answer question two and three. The findings showed that the students do not possess adequate knowledge on conscious use of computing system. Also, the study showed that there is no significant difference in the green computing knowledge possesses among male and female as well as among student from the three schools. Based on these findings, the study suggested among other an aggressive campaign on green computing among university communities.

  6. Green Marketing fot Information Technology: Perceptions of it Professionals’ Attitudes and Behaviours and Actions to Increase Green Marketing in this Sector.

    Directory of Open Access Journals (Sweden)

    Bruno Roberto Viana Castro

    2016-05-01

    Full Text Available Increased environmental awareness has been deeply affecting consumer behaviour and increasing green marketing importance for organizations. The aim of this study is to analyze the IT professionals (Information Technology perception about actions related to green marketing (considering environmental issues in all product marketing stages, since production, through the use and disposal by the consumer and propose socially planned changes so they can maintain or enhance practices related to green IT actions taken by IT professionals with a focus on environmental sustainability. To this end, we measured the attitudes towards green IT using the Expectancy-Value model beyond its knowledge level about environmental problems and their buying environmentally friendly products. From the results obtained we used the strategies composite typology for social change planned in order to propose actions to change or reinforce  behaviour as regards green marketing on the part of IT professionals. Qualitative surveys were conducted to identify the beliefs and its consequences (attitudes and then quantitative research to measure attitudes, engagement and knowledge about green IT. The results indicate that IT professionals can be considered engaged and positive attitudes towards green marketing. Therefore a reinforcement strategy is suggested through economic and psychological incentives to maintain and foster this behaviour in relation to green IT.

  7. Green Marketing fot Information Technology: Perceptions of it Professionals’ Attitudes and Behaviours and Actions to Increase Green Marketing in this Sector.

    OpenAIRE

    Bruno Roberto Viana Castro; Luiz Rodrigo Cunha Moura; Nina Rosa da Silveira Cunha; Ruth Rebello Pires

    2016-01-01

    Increased environmental awareness has been deeply affecting consumer behaviour and increasing green marketing importance for organizations. The aim of this study is to analyze the IT professionals (Information Technology) perception about actions related to green marketing (considering environmental issues in all product marketing stages, since production, through the use and disposal by the consumer) and propose socially planned changes so they can maintain or enhance practices related to gr...

  8. Development of Green Box sensor module technologies for rail applications

    Energy Technology Data Exchange (ETDEWEB)

    Rey, D.; Breeding, R. [Sandia National Labs., Albuquerque, NM (United States); Hogan, J.; Mitchell, J. [Sandia National Labs., Livermore, CA (United States); McKeen, R.G. [New Mexico Engineering Research Inst., Albuquerque, NM (United States); Brogan, J. [New Mexico Univ., Albuquerque, NM (United States)

    1996-04-01

    Results of a joint Sandia National Laboratories, University of New Mexico, and New Mexico Engineering Research Institute project to investigate an architecture implementing real-time monitoring and tracking technologies in the railroad industry is presented. The work, supported by the New Mexico State Transportation Authority, examines a family of smart sensor products that can be tailored to the specific needs of the user. The concept uses a strap-on sensor package, designed as a value-added component, integrated into existing industry systems and standards. Advances in sensor microelectronics and digital signal processing permit us to produce a class of smart sensors that interpret raw data and transmit inferred information. As applied to freight trains, the sensors` primary purpose is to minimize operating costs by decreasing losses due to theft, and by reducing the number, severity, and consequence of hazardous materials incidents. The system would be capable of numerous activities including: monitoring cargo integrity, controlling system braking and vehicle acceleration, recognizing component failure conditions, and logging sensor data. A cost-benefit analysis examines the loss of revenue resulting from theft, hazardous materials incidents, and accidents. Customer survey data are combined with the cost benefit analysis and used to guide the product requirements definition for a series of specific applications. A common electrical architecture is developed to support the product line and permit rapid product realization. Results of a concept validation, which used commercial hardware and was conducted on a revenue-generating train, are also reported.

  9. The Optimal Timing of Adoption of a Green Technology

    International Nuclear Information System (INIS)

    Cunha-e-Sa, M.A.; Reis, A.B.

    2007-01-01

    We study the optimal timing of adoption of a cleaner technology and its effects on the rate of growth of an economy in the context of an AK endogenous growth model. We show that the results depend upon the behavior of the marginal utility of environmental quality with respect to consumption. When it is increasing, we derive the capital level at the optimal timing of adoption. We show that this capital threshold is independent of the initial conditions on the stock of capital, implying that capital-poor countries tend to take longer to adopt. Also, country-specific characteristics, as the existence of high barriers to adoption, may lead to different capital thresholds for different countries. If the marginal utility of environmental quality decreases with consumption, a country should never delay adoption; the optimal policy is either to adopt immediately or, if adoption costs are t oo high , to never adopt. The policy implications of these results are discussed in the context of the international debate surrounding the environmental political agenda

  10. Solar Lighting Technologies for Highway Green Rest Areas in China: Energy Saving Economic and Environmental Evaluation

    Directory of Open Access Journals (Sweden)

    Xiaochun Qin

    2015-01-01

    Full Text Available In this paper, taking Lushan West Sea highway green rest area in Jiangxi Province of China as the case study, the suitable types, applicability, advantages, and effective methods of solar lighting technologies for highway rest area were determined based on the analysis of characteristics of highway green rest area. It was proved that solar lighting technologies including the natural light guidance system, solar LED lighting, and maximizing natural light penetration were quite suitable for highway rest area in terms of lighting effects and energy and economic efficiency. The illuminance comparison of light guidance system with electrical lighting was made based on the on-site experiment. Also, the feasibility of natural light guidance system was well verified in terms of the lighting demand of the visitor centre in the rest area by the illuminance simulation analysis. The evaluation of the energy saving, economic benefits, and environmental effects of solar lighting technologies for highway rest area was, respectively, made in detail. It was proved that the application of solar technology for green lighting of highway rest facilities not only could have considerable energy saving capacity and achieve high economic benefits, but also make great contributions to the reduction of environment pollution.

  11. New business opportunity: Green field project with new technology

    Directory of Open Access Journals (Sweden)

    Seung Jae Lee

    2014-06-01

    technology.

  12. New business opportunity: Green field project with new technology

    Science.gov (United States)

    Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

    2014-06-01

    Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

  13. Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

    Science.gov (United States)

    2005-01-01

    This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

  14. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Contingency Management

    Science.gov (United States)

    2005-01-01

    This document involves definition of technology interface requirements for Contingency Management. This was performed through a review of Contingency Management-related, HSI requirements documents, standards, and recommended practices. Technology concepts in use by the Contingency Management Work Package were considered. Beginning with HSI high-level functional requirements for Contingency Management, and Contingency Management technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of system failures and associated contingency procedures, and (2) the control capability needed by the pilot to obtain system status and procedure information. Fundamentally, these requirements provide the candidate Contingency Management technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Contingency Management operations and functions should interface with the pilot to provide the necessary Contingency Management functionality to the UA-pilot system. Requirements and guidelines for Contingency Management are partitioned into four categories: (1) Health and Status and (2) Contingency Management. Each requirement is stated and is supported with a rationale and associated reference(s).

  15. Growing substrates for aromatic plant species in green roofs and water runoff quality: pilot experiments in a Mediterranean climate.

    Science.gov (United States)

    Monteiro, Cristina M; Calheiros, Cristina S C; Palha, Paulo; Castro, Paula M L

    2017-09-01

    Green roof technology has evolved in recent years as a potential solution to promote vegetation in urban areas. Green roof studies for Mediterranean climates, where extended drought periods in summer contrast with cold and rainy periods in winter, are still scarce. The present research study assesses the use of substrates with different compositions for the growth of six aromatic plant species - Lavandula dentata, Pelargonium odoratissimum, Helichrysum italicum, Satureja montana, Thymus caespititius and T. pseudolanuginosus, during a 2-year period, and the monitoring of water runoff quality. Growing substrates encompassed expanded clay and granulated cork, in combination with organic matter and crushed eggshell. These combinations were adequate for the establishment of all aromatic plants, allowing their propagation in the extensive system located on the 5th storey. The substrate composed of 70% expanded clay and 30% organic matter was the most suitable, and crushed eggshell incorporation improved the initial plant establishment. Water runoff quality parameters - turbidity, pH, conductivity, NH 4 + , NO 3 - , PO 4 3- and chemical oxygen demand - showed that it could be reused for non-potable uses in buildings. The present study shows that selected aromatic plant species could be successfully used in green roofs in a Mediterranean climate.

  16. Pilot-scale study of ballasted-flocculation technology

    International Nuclear Information System (INIS)

    Liem, L.E.; Brant, W.H.; Gagne, B.; Michaud, J.; Beaudet, J.-F.; Landry, D.; Braden, K.; Campbell, D.

    2002-01-01

    A ballasted-flocculation pilot-scale study was undertaken to treat a wide-range river water turbidity (17 to 2,608 NTU). The pilot-scale unit was operated at flowrates of 30 to 63 m 3 /h, which corresponded to loading rates of 40 to 84 m/h. Coagulants, polymers, and microsand were added to enhance the floc agglomeration. The weighted flocs settled rapidly resulting in excellent turbidity removals of 94.7 to 99.9%. At the peak turbidity, the unit had a 99.9% removal performance (2.7 from 2,608 NTU) at a loading rate of 40 m/h. In this case, polyaluminum silicosulfate and anionic polymer dosages were 82 and 1 mg/L, respectively. The microsand recycle rate was kept constant at 4.5 m 3 /h, and 1mg microsand was added for each liter of water treated. (author)

  17. Production of "Green Natural Gas" Using Solid Oxide Electrolysis Cells (SOEC): Status of Technology and Costs

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg; Jensen, Søren Højgaard; Ebbesen, Sune Dalgaard

    2012-01-01

    energy sources only. Also dimethyl ether (DME = (CH3)2O), which might be called Liquefied Green Gas, LGG, in analogy to Liquefied Petroleum Gas, LPG, because DME has properties similar to LPG. It further gives a short review of the state of the art of electrolysis in general and SOEC in particular......This paper gives arguments in favour of using green natural gas (GNG) as storage media for the intermittent renewable energy sources. GNG is here defined as being CH4, i.e. methane, often called synthetic natural gas or substitute natural gas (SNG), produced using renewable or at least CO2 neutral....... Production of synthesis gas (H2 + CO) from CO2 and H2O using SOEC technology is evaluated. GNG and LGG can be produced from synthesis gas (or short: syngas) by means of well established commercially available catalysis technology. Finally, estimations of costs and efficiencies are presented and the relative...

  18. Participation in global value chain and green technology progress: evidence from big data of Chinese enterprises.

    Science.gov (United States)

    Song, Malin; Wang, Shuhong

    2017-01-01

    This study examined the stimulative effects of Chinese enterprises' participation in the global value chain (GVC) on the progress of their green technologies. Using difference-in-difference panel models with big data of Chinese enterprises, we measured influencing factors such as enterprise participation degree, enterprise scale, corporate ownership, and research and development (R&D) investment. The results revealed that participation in the GVC can considerably improve the green technology levels in all enterprises, except state-owned ones. However, the older an enterprise, the higher the sluggishness is likely to be in its R&D activities; this is particularly true for state-owned enterprises. The findings provide insights into the strategy of actively addressing Chinese enterprises' predicament of being restricted to the lower end of the GVC.

  19. Valorisation of food residues: waste to wealth using green chemical technologies

    OpenAIRE

    Clark, James H.; Luque, Rafael

    2013-01-01

    Waste valorisation practises have attracted a significant amount of attention in recent years with the aim of managing waste in the most sustainable way. Food waste constitutes a largely under-exploited residue from which a variety of valuable chemicals can be derived. This contribution is aimed to set the scene for a further development and promotion of sustainable food waste valorisation practises to different end products using green chemical technologies

  20. Feasibility Study of Cargo Airship Transportation Systems Powered by New Green Energy Technologies

    Science.gov (United States)

    Skuza, Jonathan R.; Park, Yeonjoon; Kim, Hyun Jung; Seaman, Shane T.; King, Glen C.; Choi, Sang H.; Song, Kyo D.; Yoon, Hargsoon; Lee, Kunik

    2014-01-01

    The development of transportation systems that use new and sustainable energy technologies is of utmost importance due to the possible future shortfalls that current transportation modes will encounter because of increased volume and costs. The introduction and further research and development of new transportation and energy systems by materials researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Department of Transportation are discussed in this Technical Memorandum. In this preliminary study, airship concepts were assessed for cargo transportation using various green energy technologies capable of 24-hour operation (i.e., night and day). Two prototype airships were successfully constructed and tested at LaRC to demonstrate their feasibility: one with commercially available solar cells for operation during the daytime and one with microwave rectennas (i.e., rectifying antennas) developed in-house for night-time operation. The test results indicate the feasibility of a cargo transportation airship powered by new green energy sources and wireless power technology. Future applications will exploit new green energy sources that use materials and devices recently developed or are in the process of being developed at LaRC. These include quantum well SiGe solar cells; low, mid-, and high temperature thermoelectric modules; and wireless microwave and optical rectenna devices. This study examines the need and development of new energy sources for transportation, including the current status of research, materials, and potential applications.

  1. Incorporating Sustainability and Green Design Concepts into Engineering and Technology Curricula

    Directory of Open Access Journals (Sweden)

    Radian G. Belu

    2016-05-01

    Full Text Available Human society is facing an uncertain future due to the present day unsustainable use of natural resources and the growing imbalance with our natural environment. Sustainability is an endeavour with uncertain outcomes requiring collaboration, teamwork, and abilities to work with respect and learn from other disciplines and professions, as well as with governments, local communities, political and civic organizations. The creation of a sustainable society is a complex and multi-stage endeavour that will dominate twenty first century.  Sustainability has four basic aspects: environment, technology, economy, and societal organization. Schools with undergraduate engineering or engineering technology programs are working to include sustainability and green design concepts into their curricula. Teaching sustainability and green design has increasingly become an essential feature of the present day engineering education. It applies to all of engineering, as all engineered systems interact with the environment in complex and important ways. Our project main goals are to provide the students with multiple and comprehensive exposures, to what it mean to have a sustainable mindset and to facilitate the development of the passion and the skills to integrate sustainable practices into engineering tools and methods. In this study we are describing our approaches to incorporating sustainability and green design into our undergraduate curricula and to list a variety of existing resources that can easily be adopted or adapted by our faculty for this purpose. Our approaches are: (1 redesigning existing courses through development of new curricular materials that still meet the objectives of the original course and (2 developing upper division elective courses that address specific topics related to sustainability, green design, green manufacturing and life-cycle assessment. 

  2. Spiritual care of cancer patients by integrated medicine in urban green space: a pilot study.

    Science.gov (United States)

    Nakau, Maiko; Imanishi, Jiro; Imanishi, Junichi; Watanabe, Satoko; Imanishi, Ayumi; Baba, Takeshi; Hirai, Kei; Ito, Toshinori; Chiba, Wataru; Morimoto, Yukihiro

    2013-01-01

    Psycho-oncological care, including spiritual care, is essential for cancer patients. Integrated medicine, a therapy combining modern western medicine with various kinds of complementary and alternative medicine, can be appropriate for the spiritual care of cancer because of the multidimensional characteristics of the spirituality. In particular, therapies that enable patients to establish a deeper contact with nature, inspire feelings of life and growth of plants, and involve meditation may be useful for spiritual care as well as related aspects such as emotion. The purpose of the present study was to examine the effect of spiritual care of cancer patients by integrated medicine in a green environment. The present study involved 22 cancer patients. Integrated medicine consisted of forest therapy, horticultural therapy, yoga meditation, and support group therapy, and sessions were conducted once a week for 12 weeks. The spirituality (the Functional Assessment of Chronic Illness Therapy-Spiritual well-being), quality of life (Short Form-36 Health Survey Questionnaire), fatigue (Cancer Fatigue Scale), psychological state (Profile of Mood States, short form, and State-Trait Anxiety Inventory) and natural killer cell activity were assessed before and after intervention. In Functional Assessment of Chronic Illness Therapy-Spiritual well-being, there were significant differences in functional well-being and spiritual well-being pre- and postintervention. This program improved quality of life and reduced cancer-associated fatigue. Furthermore, some aspects of psychological state were improved and natural killer cell activity was increased. It is indicated that integrated medicine performed in a green environment is potentially useful for the emotional and spiritual well-being of cancer patients. Copyright © 2013 Elsevier Inc. All rights reserved.

  3. Chelation technology: a promising green approach for resource management and waste minimization.

    Science.gov (United States)

    Chauhan, Garima; Pant, K K; Nigam, K D P

    2015-01-01

    Green chemical engineering recognises the concept of developing innovative environmentally benign technologies to protect human health and ecosystems. In order to explore this concept for minimizing industrial waste and for reducing the environmental impact of hazardous chemicals, new greener approaches need to be adopted for the extraction of heavy metals from industrial waste. In this review, a range of conventional processes and new green approaches employed for metal extraction are discussed in brief. Chelation technology, a modern research trend, has shown its potential to develop sustainable technology for metal extraction from various metal-contaminated sites. However, the interaction mechanism of ligands with metals and the ecotoxicological risk associated with the increased bioavailability of heavy metals due to the formation of metal-chelant complexes is still not sufficiently explicated in the literature. Therefore, a need was felt to provide a comprehensive state-of-the-art review of all aspects associated with chelation technology to promote this process as a green chemical engineering approach. This article elucidates the mechanism and thermodynamics associated with metal-ligand complexation in order to have a better understanding of the metal extraction process. The effects of various process parameters on the formation and stability of complexes have been elaborately discussed with respect to optimizing the chelation efficiency. The non-biodegradable attribute of ligands is another important aspect which is currently of concern. Therefore, biotechnological approaches and computational tools have been assessed in this review to illustrate the possibility of ligand degradation, which will help the readers to look for new environmentally safe mobilizing agents. In addition, emerging trends and opportunities in the field of chelation technology have been summarized and the diverse applicability of chelation technology in metal extraction from

  4. Piloting Augmented Reality Technology to Enhance Realism in Clinical Simulation.

    Science.gov (United States)

    Vaughn, Jacqueline; Lister, Michael; Shaw, Ryan J

    2016-09-01

    We describe a pilot study that incorporated an innovative hybrid simulation designed to increase the perception of realism in a high-fidelity simulation. Prelicensure students (N = 12) cared for a manikin in a simulation lab scenario wearing Google Glass, a wearable head device that projected video into the students' field of vision. Students reported that the simulation gave them confidence that they were developing skills and knowledge to perform necessary tasks in a clinical setting and that they met the learning objectives of the simulation. The video combined visual images and cues seen in a real patient and created a sense of realism the manikin alone could not provide.

  5. The Ecological Behaviour Related to Green Information and Communication Technology in Romanian Organizations

    Directory of Open Access Journals (Sweden)

    Laura-Diana Radu

    2014-12-01

    Full Text Available An increased focus on environmental issues and the fulminant development of information and communication technologies led to the appearance and increased interest in the green characteristics of the available products and services. The ecological behaviour related to these technologies used by organizations, has become a widely studied and applied topic nowadays. In this context, this paper aims to analyse the perception of managers and employees of the Romanian companies in relation to the green information and communication technologies in the attempt to offer a genuine image of their attitude and see if their views are close to the international vision on environment protection. Starting from the literature regarding information and communication technologies and the available empirical studies, we have made an analysis on two categories of organizations: the ones that apply environment policies supported by the institutions and the ones that do not apply any policies, including comparisons between them. The conclusions of the study pointed out the presence of environmental concerns, not always clearly drawn or applied, but they could form the basis for the future actions and initiatives of consumers of information and communication technologies products and services in the wider context and will to fall into line with the Western level of economic and social development.

  6. Statistics on Science and Technology in Latin America, Experience with UNESCO Pilot Projects, 1972-1974.

    Science.gov (United States)

    Thebaud, Schiller

    This report examines four UNESCO pilot projects undertaken in 1972 in Brazil, Colombia, Peru, and Uruguay to study the methods used for national statistical surveys of science and technology. The projects specifically addressed the problems of comparing statistics gathered by different methods in different countries. Surveys carried out in Latin…

  7. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-01

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI. PMID:29382112

  8. Environmental Regulation, Foreign Direct Investment and Green Technological Progress—Evidence from Chinese Manufacturing Industries

    Directory of Open Access Journals (Sweden)

    Jiangfeng Hu

    2018-01-01

    Full Text Available This study examines the spillover effects of foreign direct investment (FDI on green technology progress rate (as measured by the green total factor productivity. The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications—high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  9. Potential of some aquatic plants for removal of arsenic from wastewater by green technology

    Directory of Open Access Journals (Sweden)

    Mohammed Barznji Dana A.

    2015-03-01

    Full Text Available Phytoremediation or green technology is counted among the successful and effective biological contaminated water treatment techniques. Basically, the concept of this green, cost-effective, simple, environmentally nondisruptive method consists in using plants and microbiological processes to reduce contaminants in the ecosystem. Different species from aquatic plants (emerged, free-floating, and submerged have been studied to mitigate toxic contaminants such as arsenic, cadmium, chromium, copper, lead, mercury, zinc, etc. Arsenic is one of the most severe toxic elements; it is widely distributed in the environment, usually found in combination with chloride, oxygen, sulphur and metal ions as a result of mineral dissolution from sedimentary or volcanic rocks and the dilution of geothermal water. The effluents from both industrial and agricultural sectors are also regarded as sources to contaminate water. From the accumulation point of view, several aquatic plants have been mentioned as good arsenic accumulators and their performance is evaluated using the green technology method. These include Spirodela polyrhiza, Wolffia globosa, Lemna gibba, L. minor, Eichhornia crassipes, Azolla caroliniana, Azolla filiculoides, Azolla pinnata, Ceratophyllum demersum and Pistia stratiotes. The up-to-date information illustrated in this review paper generates knowledge about the ability of some common aquatic plants around the globe to remediate arsenic from contaminated water.

  10. Environmental Regulation, Foreign Direct Investment and Green Technological Progress-Evidence from Chinese Manufacturing Industries.

    Science.gov (United States)

    Hu, Jiangfeng; Wang, Zhao; Lian, Yuehan; Huang, Qinghua

    2018-01-29

    This study examines the spillover effects of foreign direct investment (FDI) on green technology progress rate (as measured by the green total factor productivity). The analysis utilizes two measures of FDI, labor-based FDI and capital-based FDI, and separately investigates four sets of industry classifications-high/low discharge regulation and high/low emission standard regulation. The results indicate that in the low discharge regulation and low emission standard regulation industry, labor-based FDI has a significant negative spillover effect, and capital-based FDI has a significant positive spillover effect. However, in the high-intensity environmental regulation industry, the negative influence of labor-based FDI is completely restrained, and capital-based FDI continues to play a significant positive green technological spillover effects. These findings have clear policy implications: the government should be gradually reducing the labor-based FDI inflow or increasing stringency of environmental regulation in order to reduce or eliminate the negative spillover effect of the labor-based FDI.

  11. Pilot demonstrations of arsenic treatment technologies in U.S. Department of Energy Arsenic Water Technology Partnership program.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Aragon, Alicia R.; Siegal Malcolm D.; Dwyer, Brian P.

    2005-01-01

    The Arsenic Water Technology Partnership program is a multi-year program funded by a congressional appropriation through the Department of Energy. The program is designed to move technologies from benchscale tests to field demonstrations. It will enable water utilities, particularly those serving small, rural communities and Indian tribes, to implement the most cost-effective solutions to their arsenic treatment needs. As part of the Arsenic Water Technology Partnership program, Sandia National Laboratories is carrying out field demonstration testing of innovative technologies that have the potential to substantially reduce the costs associated with arsenic removal from drinking water. The scope for this work includes: (1) Selection of sites and identification of technologies for pilot demonstrations; (2) Laboratory studies to develop rapid small-scale test methods; and (3) Pilot-scale studies at community sites involving side-by-side tests of innovative technologies. The goal of site selection is to identify sites that allow examination of treatment processes and systems under conditions that are relevant to different geochemical settings throughout the country. A number of candidate sites have been identified through reviews of groundwater quality databases, conference proceedings and discussions with state and local officials. These include sites in New Mexico, Arizona, Colorado, Oklahoma, Michigan, and California. Candidate technologies for the pilot tests are being reviewed through vendor forums, proof-of-principle benchscale studies managed by the American Water Works Association Research Foundation (AwwaRF) and the WERC design contest. The review considers as many potential technologies as possible and screens out unsuitable ones by considering data from past performance testing, expected costs, complexity of operation and maturity of the technology. The pilot test configurations will depend on the site-specific conditions such as access, power availability

  12. Strategies for Promoting Green Building Technologies Adoption in the Construction Industry—An International Study

    Directory of Open Access Journals (Sweden)

    Albert Ping Chuen Chan

    2017-06-01

    Full Text Available Because green building technologies (GBTs adoption is a promising way of ameliorating the sustainability performance of buildings, GBTs are receiving increased interest in the global construction community. The barriers to the adoption of GBTs, such as higher cost and lack of awareness, further indicate that proper strategies need to be devised for promoting the wider adoption of GBTs in buildings development. However, there exist limited empirical studies identifying the strategies for promoting GBTs adoption in the construction industry. This study aims to identify the strategies that are important for promoting GBTs adoption in construction. After a comprehensive literature review to identify strategies for the promotion of GBTs adoption, empirical data were gleaned through a questionnaire survey with 104 green building experts around the world. The analysis results validated the importance of all of the 12 promotion strategies used for the study. Green building experts from different countries and with different backgrounds had significant agreement on the relative importance ranking of the promotion strategies. Furthermore, “financial and further market-based incentives for GBTs adopters”, “availability of better information on cost and benefits of GBTs”, “mandatory governmental policies and regulations”, and “green rating and labeling” were identified as the top four important promotion strategies. The research findings provide a valuable reference to assist practitioners and policy makers in developing practical strategies for promoting GBTs adoption to eventually achieve the sustainable development of buildings. From the perspective of international experts, this study adds to the green building literature by offering empirical evidence of the important strategies for promoting GBTs adoption in the construction industry. Future research will investigate the interrelationships among the promotion strategies and their

  13. GREEN TECHNOLOGY FORESIGHT OF HIGH TECHNOLOGY: HYPE OR POTENTIALS - THE CHALLENGES FROM NANOTECHNOLOGY, BIOTECHNOLOGY AND ICT

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2004-01-01

    The paper describes the theoretical and methodological approach in an ongoing Danish technology foresight project focusing on the environmental potentials and risks of nanotechnology, biotechnology, and information and communication technology (ICT). The paper gives a short overview of some...

  14. Rare earth elements-critical resources for green energy and digital technology

    International Nuclear Information System (INIS)

    Singh, D.

    2013-01-01

    High technology and environment applications of the Rare Earth Elements (REE) have grown dramatically in diversity and importance over the past few decades. The REE forms largest economical coherent group in the periodic table. The versatility and specialty of the REE has given them a level of technological, environment and economical importance. As technological applications of REE have multiplied over the past several decades, the demand for them has increased dramatically. The green energy is the segment, which is largely contributed in its performance by the REE. The increasing concern about the impact of green house gases around the globe has made countries to explore clean energy technologies to reduce emissions. India has ambitious plans for generating solar power of 30,000 MW and wind energy of 50,000 MW by 2013. Critical component with respect to wind energy is the high strength rare earth permanent magnet, while in hybrid electrical motors REEs like lanthanum are used in LiMH battery pack

  15. Intradermal indocyanine green for in vivo fluorescence laser scanning microscopy of human skin: a pilot study.

    Directory of Open Access Journals (Sweden)

    Constanze Jonak

    Full Text Available BACKGROUND: In clinical diagnostics, as well as in routine dermatology, the increased need for non-invasive diagnosis is currently satisfied by reflectance laser scanning microscopy. However, this technique has some limitations as it relies solely on differences in the reflection properties of epidermal and dermal structures. To date, the superior method of fluorescence laser scanning microscopy is not generally applied in dermatology and predominantly restricted to fluorescein as fluorescent tracer, which has a number of limitations. Therefore, we searched for an alternative fluorophore matching a novel skin imaging device to advance this promising diagnostic approach. METHODOLOGY/PRINCIPAL FINDINGS: Using a Vivascope®-1500 Multilaser microscope, we found that the fluorophore Indocyanine-Green (ICG is well suited as a fluorescent marker for skin imaging in vivo after intradermal injection. ICG is one of few fluorescent dyes approved for use in humans. Its fluorescence properties are compatible with the application of a near-infrared laser, which penetrates deeper into the tissue than the standard 488 nm laser for fluorescein. ICG-fluorescence turned out to be much more stable than fluorescein in vivo, persisting for more than 48 hours without significant photobleaching whereas fluorescein fades within 2 hours. The well-defined intercellular staining pattern of ICG allows automated cell-recognition algorithms, which we accomplished with the free software CellProfiler, providing the possibility of quantitative high-content imaging. Furthermore, we demonstrate the superiority of ICG-based fluorescence microscopy for selected skin pathologies, including dermal nevi, irritant contact dermatitis and necrotic skin. CONCLUSIONS/SIGNIFICANCE: Our results introduce a novel in vivo skin imaging technique using ICG, which delivers a stable intercellular fluorescence signal ideal for morphological assessment down to sub-cellular detail. The application of

  16. Herbal complex of green buckwheat in the production technology of cakes

    Directory of Open Access Journals (Sweden)

    L. E. Glagoleva

    2016-01-01

    Full Text Available The possibility of using vegetable complex of green buckwheat in production technology cheesecakes. The unique chemical, rich mineral and vitamin composition buckwheat green indicates desirability of not only its use, but also th e possibility of using for cooking preventive and functional orientation. Using green buckwheat plant complex due to the hi gh water-holding ability to reduce the time of the process, eliminate some technological preparatory operations, such as pressing off. It is found that the maximum degree of swelling (2.5 g/g was observed at 40 oC and pH 4, 2. The time to reach an equilibrium state is reached after 30 minutes. On the basis of the research has been defined in a way to make plant complex curd basis, in an amount of from 10 to 70 % based on standardized physical-chemical and organoleptic characteristics of harmonious order to minimize-if-operation of flour to make the product functional and preventive properties. Technology of production of a pre -from adequate use of shock freezing, thus preserving the shape, color and flavor of the product. Microbiologists -cal studies analyzed frozen semi-finished products indicates that the microbiological-cal indicators remain stable throughout the shelf life. The use of herbal ingredients in the development of technology and the adjustment of the nutritional value of cheese bioproducts will solve the issue of their care-enrichment in essential micronutrients and natural way to improve the taste and increase the life -sti Useful developed products that currently is a modern and topical focus of research.

  17. Toronto green roof construction standard

    International Nuclear Information System (INIS)

    Aster, D.

    2007-01-01

    Toronto City Council adopted a green roof strategy in February 2006. This paper reviewed the by-law governing the strategy as well as the work in progress to develop minimum standards for the design and construction of green roofs in Toronto. The strategy included a series of recommendations regarding the installation of green roofs on city buildings; a pilot grant program; using the development process to encourage green roofs; and, public education and promotion. It was noted that compared to Europe, the development of standards for green roofs in North America is in its early stages. As an emerging sustainable technology, there currently are no standards incorporated into Ontario's Building Code against which Toronto can measure the design and construction of green roofs. Therefore this paper included an analysis detailing how the recommended design requirements were able to support the City's green roof policy objectives and integrate the performance criteria for green roofs previously established and supported by Toronto City Council. The key policy objectives of the City's green roof strategy were to reduce the urban heat island effect; to address stormwater management implications in terms of quality and quantity; to improve the energy budgets of individual buildings; and, to improve air quality

  18. On the optimal allocation of green technology under climate change agreements

    Energy Technology Data Exchange (ETDEWEB)

    Schueller, David

    2009-07-15

    This report investigates whether a technology transfer mechanism can help to reach a cooperative outcome, in a game on a climate change treaty that involves emission caps for both developed and developing countries. A climate change treaty without the inclusion of developing countries and their acceptance of emission limits is likely to be ineffective. Too little research and development of green technology is currently undertaken, considering its potential global impact, especially in developing countries. Analyzing a simple game with two asymmetric players, a tentative result is that the technology-transfer mechanism considered here cannot help to establish the cooperative outcome as a Nash equilibrium. However, the inclusion of secondary benefits in the payoff function, which are likely to occur when such a transfer takes place, could change this result. (Author)

  19. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

    Science.gov (United States)

    2005-01-01

    The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

  20. Development of some operations in technological flowsheet for spent VVER fuel reprocessing at a pilot plant

    International Nuclear Information System (INIS)

    Lazarev, L.N.; Galkin, B.Ya; Lyubtsev, R.I.; Romanovskii, V.N.; Velikhov, E.P.

    1981-01-01

    The fuel reprocessing pilot plants for high active materials would permit the study and development or particular processing steps and flowsheet variations; in some cases, these experimental installations realize on a small scale practically all technological chains of large reprocessing plants. Such a fuel reprocessing pilot plant with capacity of 3 kg U/d has been built at V. G. Khlopin Radium Institute. The pilot plant is installed in the hot cell of radiochemical compartment, and is composed of the equipments for fuel element cutting and dissolving, the preparation of feed solution (clarification, correction), extraction reprocessing and the production of uranium, plutonium and neptunium concentrates, the complex processing of liquid and solid wastes and a special unit for gas purification and analysis. In the last few years, a series of experiments have been carried out on the reprocessing of spent VVER fuel. (J.P.N.)

  1. Pilot-scale Biogas Plant for the Research and Development of New Technologies

    Directory of Open Access Journals (Sweden)

    Ivan Simeonov

    2012-09-01

    Full Text Available Тhe paper describes a new pilot-scale biogas plant of the Institute of Microbiology - Bulgarian Academy of Sciences. The equipment includes: a 100 L pilot bioreactor, a 200 L metal gasholder, sensors, actuators, a two-level automatic process monitoring and control system, a fire and explosion protection system and two web cameras. The monitoring and control system is composed on the lower level of a controller Beckhoff, and on the higher level - of a PC with specialized software (under development. The pilot biogas plant is designed to work out and scale up various anaerobic digestion (AD technologies based on different types of feedstock. All the data will be stored on the PC for quick reference and possibly data mining, parameter identification and verification of different AD mathematical models.

  2. Electron beam irradiation: a technology for quarantine disinfestation of green gram seeds against Callsobruchus maculatus

    International Nuclear Information System (INIS)

    Bhalla, Shashi; Srinivasan, K.; Singh, Subadas; Thakur, Manju; Sharma, S.K.; Pramod, R.; Dwivedi, J.; Bapna, S.C.

    2010-01-01

    Green gram (Vigna radiata (L.) Wilkzec) an important legume crop in India is grown in 33.4 lakh hectares. India accounts for ∼ 60% of the world's green gram area but contributes only 47% of its production. Major constraint in storage is the pulse beetle Callosobruchus maculatus Fab. (Coleoptera: Bruchidae), which may cause damage upto 100%. It is widespread throughout tropics and sub-tropics with wide host range and also has different strains. Fumigation with methyl bromide (MB) has been the most widely applied management practice for its control. However, the ozone depleting effect of MB has led to restrictions in its use. Therefore, there is a need for an alternative strategy for controlling the pests. Irradiation, an approved technology by International Plant Protection Convention, seems to be a viable non-chemical, residue-free strategy. Therefore, present studies were conducted to see the efficacy of electron beam (EB) irradiation as quarantine disinfestation treatment against green gram seeds infested with different stages of the target pest, C. maculatus

  3. Onsite greywater treatment using pilot scale grow technology

    International Nuclear Information System (INIS)

    Rajput, M.U.

    2015-01-01

    The GROW Technology for greywater treatment was installed at the MUET (Mehran University of Engineering and Technology), hostel and run under continuous flow conditions with hydraulic loading rate of 0.15m.d-1. The monitoring and analysis of influent and effluent water were carried out during January-December, 2010. Local plants species such as water hyacinth, Pennywort (duck weed), Mint and Cattail were used in the GROW rig as a mixed mode. Coarse Gravels were filled in the troughs as a medium. The collected samples were analyzed for BOD5 (Biochemical Oxygen Demand), COD (Chemical Oxygen Demand), TSS (Total Suspended Solids), pH, and DO (Dissolved Oxygen). Removal efficiencies of BOD5, COD and TSS were calculated as 83.0,69.0 and 84.0% respectively. DO was found increased from 0.6-3.5 mg.dm-3 while pH was observed between 6.5-7.8. (author)

  4. Gender in health technology assessment: pilot study on agency approaches.

    Science.gov (United States)

    Panteli, Dimitra; Zentner, Annette; Storz-Pfennig, Philipp; Busse, Reinhard

    2011-07-01

    Gender as a social construct is a recognized health determinant. Because best practice in reporting health technology assessment (HTA) clearly specifies the need to appraise a technology's social impact within the target population, the extent to which gender issues are taken into account in HTA production is of interest, not only in light of equitable practices but also for reasons of effectiveness. The aim of this study is to provide a first assessment of the degree of gender sensitivity shown by HTA agencies around the world today. The Web sites of sixty HTA agencies were analyzed. The consideration of gender aspects was specifically looked for in each agency's general mission statement, its priority setting process, and its methodological approach. Additionally, specific gender-oriented initiatives not belonging to any of the aforementioned categories were identified. Of the sixty agencies, less than half mention a commitment to addressing the social implication of health technologies. Only fifteen institutions make information on their priority setting principles available on their Web sites and gender was an issue in two of those cases. Data on methodology were obtainable online from 18 agencies, two of which mentioned gender issues explicitly. Finally, gender-oriented initiatives were identified by thirteen agencies. A gender-sensitive approach is apparently rarely adopted in current HTA production. Exceptional practices and relevant tools do exist and could serve as examples to be promoted by international collaborative networks.

  5. Sawah Rice Eco-technology and Actualization of Green Revolution in West Africa: Experience from Nigeria and Ghana

    OpenAIRE

    O.I. OLADELE; T. WAKATSUKI

    2010-01-01

    The development and dissemination of sawah rice eco-technology in Nigeria and Ghana as prerequisites for the actualization of green revolution in West Africa were described. It showed that the neglect of the eco-technology and the overemphasis of the biotechnology have rendered the ineffective transferability of the green revolution process from Asia to Africa. The sawah eco-technology increases yield up to 5 t/hm2 through bunding and the use of inlet and outlet connecting irrigation and drai...

  6. Sawah Rice Eco-technology and Actualization of Green Revolution in West Africa: Experience from Nigeria and Ghana

    Directory of Open Access Journals (Sweden)

    O.I. OLADELE

    2010-09-01

    Full Text Available The development and dissemination of sawah rice eco-technology in Nigeria and Ghana as prerequisites for the actualization of green revolution in West Africa were described. It showed that the neglect of the eco-technology and the overemphasis of the biotechnology have rendered the ineffective transferability of the green revolution process from Asia to Africa. The sawah eco-technology increases yield up to 5 t/hm2 through bunding and the use of inlet and outlet connecting irrigation and drainage, which enhances effective water control and management, improves the efficiency of fertilizer, improves nitrogen fixation by soil microbes and algae, increases the use of wetlands, improves soil organic matter accumulation, suppresses weed growth, and enhances immune mechanism of rice through nutrient supply. The current experience has therefore established that the technology overcomes the constraints that have limited the realization of green revolution in West Africa.

  7. Green technology as a strategy in managing the black spots in Siak Highway, Indonesia

    Science.gov (United States)

    Sandhyavitri, A.; Wira, J.; Martin, A.

    2018-04-01

    It was identified that the total traffic accidents in the highway section of Siak, Indonesia within the period of 2011 to 2015 were 1,208 events (2 accidents per 3 days). This accidents figure were considered relatively high and it need to mitigate. The aim of this research are to; (i) analyze the location of Black Spot in the Siak highway, and (ii) drawn a strategy reducing the traffic accidents based on green technology. This study identified that the black spot area was located in the STA 44 + 050 (with a value of the weighted index was 86 and an accident severity rate was 6.21), these values were relatively high. The road horizontal alignment condition at this location was highlighted as a sub-standard high way, consists of low visibility, numerous turning pads, minimum road signs, and minimum road shoulders width. The technical strategy was then drawn as follow; conducting regular road rehabilitation and maintenance, equipping road markings and the street lights as well as road safety facilities based on the green technology such as solar cell traffic lights, solar cell street lights and deploying police statues in reducing traffic accidents within the black spot areas.

  8. Optimal Strategies for Low Carbon Supply Chain with Strategic Customer Behavior and Green Technology Investment

    Directory of Open Access Journals (Sweden)

    Wen Jiang

    2016-01-01

    Full Text Available Climate change is mainly caused by excessive emissions of carbon dioxide and other greenhouse gases. In order to reduce carbon emissions, cap and trade policy is implemented by governments in many countries, which has significant impacts on the decisions of companies at all levels of the low carbon supply chain. This paper investigates the decision-making and coordination of a low carbon supply chain consisting of a low carbon manufacturer who produces one product and is allowed to invest in green technology to reduce carbon emissions in production and a retailer who faces stochastic demands formed by homogeneous strategic customers. We investigate the optimal production, pricing, carbon trading, and green technology investment strategies of the low carbon supply chain in centralized (including Rational Expected Equilibrium scenario and quantity commitment scenario and decentralized settings. It is demonstrated that quantity commitment strategy can improve the profit of the low carbon supply chain with strategic customer behavior. We also show that the performance of decentralized supply chain is lower than that of quantity commitment scenario. We prove that the low carbon supply chain cannot be coordinated by revenue sharing contract but by revenue sharing-cost sharing contract.

  9. ECN's torrefaction-based BO2-technology. From pilot to demo

    Energy Technology Data Exchange (ETDEWEB)

    Kiel, J.H.A. [ECN Biomass, Coal and Environmental Research, Petten (Netherlands)

    2011-02-15

    The contents of this PowerPoint presentation are: Torrefaction design challenges; Initial small-scale R and D; ECN's torrefaction-based BO2-technology; Pilot-scale testing; and Demonstration and market introduction. The conclusions state that Torrefaction potentially allows cost-effective production of 2nd generation biomass pellets from a wide range of biomass/waste feedstock with a high energy efficiency (>90%); Torrefaction pellets show: High energy density, Water resistance, No/Limited biological degradation and heating, Excellent grindability, and Good combustion and gasification properties; Torrefaction is a separate thermal regime and requires dedicated reactor/process design; Torrefaction development is in pilot/demo-phase and shows strong market pull for torrefaction plants and torrefaction pellets; For ECN's BO2-technology a demo-plant is in preparation and industrial partnership for world-wide market introduction is nearly established.

  10. Pseudosatellite technologies based on the use of functionally stable complexes of remote-piloted aircrafts

    Science.gov (United States)

    Mashkov, O. A.; Samborskiy, I. I.

    2009-10-01

    A bundle of papers dealing with functionally stable systems requires the necessity of analyzing of obtained results and their understanding in a general context of cybernetic's development and applications. Description of this field of science, main results and perspectives of the new theory of functionally stability of dynamical systems concerning the problem of remote-piloted aircrafts engineering using pseudosatellite technologies are proposed in the paper.

  11. Inquiry-Based Science and Technology Enrichment Program: Green Earth Enhanced with Inquiry and Technology

    Science.gov (United States)

    Kim, Hanna

    2011-01-01

    This study investigated the effectiveness of a guided inquiry integrated with technology, in terms of female middle-school students' attitudes toward science/scientists and content knowledge regarding selective science concepts (e.g., Greenhouse Effect, Air/Water Quality, Alternative Energy, and Human Health). Thirty-five female students who were…

  12. Pilot Assessment of the Repeatability of Indocyanine Green Fluorescence Imaging and Correlation with Traditional Foot Perfusion Assessments.

    Science.gov (United States)

    Venermo, M; Settembre, N; Albäck, A; Vikatmaa, P; Aho, P-S; Lepäntalo, M; Inoue, Y; Terasaki, H

    2016-10-01

    Ankle brachial index (ABI), toe pressures (TP), and transcutaneous oxygen pressure (TcPO 2 ) are traditionally used in the assessment of critical limb ischemia (CLI). Indocyanine green (ICG) fluorescence imaging can be used to evaluate local circulation in the foot and to evaluate the severity of ischemia. This prospective study analyzed the suitability of a fluorescence imaging system (photodynamic eye [PDE]) in CLI. Forty-one patients with CLI were included. Of the patients, 66% had diabetes and there was an ischemic tissue lesion in 70% of the limbs. ABI, toe pressures, TcPO 2 and ICG-fluorescence imaging (ICG-FI) were measured in each leg. To study the repeatability of the ICG-FI, each patient underwent the study twice. After the procedure, foot circulation was measured using a time-intensity curve, where T1/2 (the time needed to achieve half of the maximum fluorescence intensity) and PDE10 (increase of the intensity during the first 10 s) were determined. A time-intensity curve was plotted using the same areas as for the TcPO 2 probes (n=123). The mean ABI was 0.43, TP 21 mmHg, TcPO 2 23 mmHg, T1/2 38 s, and PDE10 19 AU. Time-intensity curves were repeatable. In a Bland-Altman scatter plot, the 95% limits of agreement of PDE10 was 9.9 AU and the corresponding value of T1/2 was 14 s. Correlation between ABI and TP was significant (R=.73, p<.001), and it was weaker in diabetic patients (R=.47, p=.048) compared with non-diabetic patients (R=.89, p=.002). Correlations between ABI and TcPO 2 and TP and TcPO 2 were weak (R=.37, p=.05 and R=.43, p=.037, respectively). Correlation between TcPO 2 and PDE10 was strong in diabetic patients (R=.70, p=.003). According to this pilot study, ICG-FI with PDE can be used in the assessment of blood supply in the ischemic foot. Copyright © 2016 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

  13. Using ultrasound technology for the inactivation and thermal sensitization of peroxidase in green coconut water.

    Science.gov (United States)

    Rojas, Meliza Lindsay; Trevilin, Júlia Hellmeister; Funcia, Eduardo Dos Santos; Gut, Jorge Andrey Wilhelms; Augusto, Pedro Esteves Duarte

    2017-05-01

    Green coconut water has unique nutritional and sensorial qualities. Despite the different technologies already studied, its enzymatic stability is still challenging. This study evaluated the use of ultrasound technology (US) for inactivating/sensitizing coconut water peroxidase (POD). The effect of both US application alone and as a pre-treatment to thermal processing was evaluated. The enzyme activity during US processing was reduced 27% after 30min (286W/L, 20kHz), demonstrating its high resistance. The thermal inactivation was described by the Weibull model under non-isothermal conditions. The enzyme became sensitized to heat after US pre-treatment. Further, the use of US resulted in more uniform heat resistance. The results suggest that US is a good technology for sensitizing enzymes before thermal processing (even for an enzyme with high thermal resistance). Therefore, the use of this technology could decrease the undesirable effects of long times and/or the high temperatures of the conventional thermal processing. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. The effect of financial constraints, technological progress and long-term contracts on tradable green certificates

    International Nuclear Information System (INIS)

    Agnolucci, Paolo

    2007-01-01

    Tradable green certificates (TGCs) have recently become a diffuse instrument to support renewable electricity in OECD countries. Although it is perhaps too early to draw a conclusive judgement on the effectiveness of this instrument in increasing renewable capacity and decreasing the price of certificates, one view in the literature maintains that long-term contracts are of particular importance for TGCs to be effective. This paper contributes to this debate by analysing how financial constraints and technological progress can induce investors to hold pessimistic expectations of their ability to sell green certificates and still make a profit. Clearly, these expectations will prevent investors from building new capacity to fulfil the quota comprised in TGCs and will keep the price of certificates traded in the market high. As this kind of expectation is not influenced by most design features of TGCs, one can conclude that long-term contracts are particularly important in determining the effectiveness and cost-effectiveness of these instruments. Some attention should therefore be paid to the features of the TGCs, which induce obliged parties to offer long-term contracts to renewable generators. (author)

  15. Separation of the metallic and non-metallic fraction from printed circuit boards employing green technology

    Energy Technology Data Exchange (ETDEWEB)

    Estrada-Ruiz, R.H., E-mail: rhestrada@itsaltillo.edu.mx; Flores-Campos, R., E-mail: rcampos@itsaltillo.edu.mx; Gámez-Altamirano, H.A., E-mail: hgamez@itsaltillo.edu.mx; Velarde-Sánchez, E.J., E-mail: ejvelarde@itsaltillo.edu.mx

    2016-07-05

    Highlights: • Small sizes of particles are required in order to separate the different fractions. • Inverse flotation process is an efficient green technology to separate fractions. • Superficial air velocity is the main variable in the inverse flotation process. • Inverse flotation is a green process because the pulṕs pH is 7.0 during the test. - Abstract: The generation of electrical and electronic waste is increasing day by day; recycling is attractive because of the metallic fraction containing these. Nevertheless, conventional techniques are highly polluting. The comminution of the printed circuit boards followed by an inverse flotation process is a clean technique that allows one to separate the metallic fraction from the non-metallic fraction. It was found that particle size and superficial air velocity are the main variables in the separation of the different fractions. In this way an efficient separation is achieved by avoiding the environmental contamination coupled with the possible utilization of the different fractions obtained.

  16. A review on green trend for oil extraction using subcritical water technology and biodiesel production.

    Science.gov (United States)

    Abdelmoez, Weal; Ashour, Eman; Naguib, Shahenaz M

    2015-01-01

    It became a global agenda to develop clean alternative fuels which were domestically available, environmentally acceptable and technically feasible. Thus, biodiesel was destined to make a substantial contribution to the future energy demands of the domestic and industrial economies. Utilization of the non edible vegetable oils as raw materials for biodiesel production had been handled frequently for the past few years. The oil content of these seeds could be extracted by different oil extraction methods, such as mechanical extraction, solvent extraction and by subcritical water extraction technology SWT. Among them, SWT represents a new promising green extraction method. Therefore this review covered the current used non edible oil seeds for biodiesel production as well as giving a sharp focus on the efficiency of using the SWT as a promising extraction method. In addition the advantages and the disadvantages of the different biodiesel production techniques would be covered.

  17. Structural and optical properties of NiFe2O4 synthesized via green technology

    Science.gov (United States)

    Patel, S.; Saleem, M.; Varshney, Dinesh

    2018-05-01

    The nanoparticles of NiFe2O4 were successfully synthesized via green technology using banana peel extract as the catalyst as well as the medium for reaction technique is reported. Analysis of X-ray diffraction spectrum revealed the cubic structure for the prepared spinel ferrite samples crystallized into cubic spinel structure with the space group Fd3m. The Retvield refinement was carried out which obeyed the results obtained from the XRD spectrum analysis of the sample. Raman spectrum provided confirmation for the spinel structure formation and five active Raman modes were observed. Since the optical band-gap value shows inverse response to the crystallite size, The UV-Vis spectrum study confirmed dual but reduced band-gap value.

  18. Green Chemistry Technology and Product Development. Final Report for Intermediary Biochemicals, Inc.

    Energy Technology Data Exchange (ETDEWEB)

    Zeikus, J. Gregory [Michigan State Univ., East Lansing, MI (United States). Dept. of Microbiology & Molecular Genetics

    2010-08-28

    The DOE funds in this award were applied to developing systems to cost effectively produce intermediate (1 dollar$-$1,000 dollars per kg) and fine ($1,000 per kg) chemicals from renewable feedstocks using environmentally responsible processes via collaboration with academic research laboratories to provide targeted technology and early product development. Specifically, development of a thermostable alkaline phosphatase overexpression system to provide supplies and reagents for improved biological test kits, creation of a microbial strain for the efficient production of aspartate from glucose (replacing oil-derived fumarate in aspartate production), and early development research for an electrochemical bioreactor for the conversion of glucose to mannitol were targeted by this research. Also, establishing this positive academic/industrial collaboration with Michigan State University Laboratories and fostering greater inter-laboratory collaboration would also support the strategy of efficiently transitioning academic green chemistry research into the commercial sector and open an avenue to low cost early product development coupled with scientific training.

  19. Power generation from thermoelectric system-embedded Plexiglas for green building technology

    KAUST Repository

    Inayat, Salman Bin

    2012-06-09

    Thermoelectric materials embedded through or inside exterior glass windows can act as a viable source of supplemental power in geographic locations where hot weather dominates. This thermoelectricity is generated because of the thermal difference between the high temperature outside and the relatively cold temperature inside. Using physical vapor deposition process, we experimentally verify this concept by embedding bismuth telluride and antimony telluride through the 5 mm Plexiglas to demonstrate 10 nW of thermopower generation with a temperature gradient of 21 °C. Albeit tiny at this point with non-optimized design and development, this concept can be extended for relatively large-scale power generation as an additional power supply for green building technology.

  20. Green Materials Science and Engineering Reduces Biofouling: Approaches for Medical and Membrane-based Technologies

    Directory of Open Access Journals (Sweden)

    Kerianne M Dobosz

    2015-03-01

    Full Text Available Numerous engineered and natural environments suffer deleterious effects from biofouling and/or biofilm formation. For instance, bacterial contamination on biomedical devices pose serious health concerns. In membrane-based technologies, such as desalination and wastewater reuse, biofouling decreases membrane lifetime and increases the energy required to produce clean water. Traditionally, approaches have combatted bacteria using bactericidal agents. However, due to globalization, a decline in antibiotic discovery, and the widespread resistance of microbes to many commercial antibiotics and metallic nanoparticles, new materials and approaches to reduce biofilm formation are needed. In this mini-review, we cover the recent strategies that have been explored to combat microbial contamination without exerting evolutionary pressure on microorganisms. Renewable feedstocks, relying on structure-property relationships, bioinspired/nature-derived compounds, and green processing methods are discussed. Greener strategies that mitigate biofouling hold great potential to positively impact human health and safety.

  1. Green technology foresight of high technology: a social shaping of technology approach to the analysis of hopes and hypes

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Jørgensen, Ulrik

    2009-01-01

    Protection Agency with the purpose of acquiring knowledge about the environmental potentials and risks related to the three areas of technology. The foresight was organized with a social shaping of technology (SST) approach to the field in order to cater for the complex relationship between societal demands......, technology options, innovation dynamics and environmental impacts. The approach involved studying actor-networks, laboratory programs and technology trajectories as well as deconstructing different stakeholders’ high tech visions. The identified environmental potentials and risks related to the three areas...

  2. Green technology for conversion of renewable hydrocarbon based on plasma-catalytic approach

    Science.gov (United States)

    Fedirchyk, Igor; Nedybaliuk, Oleg; Chernyak, Valeriy; Demchina, Valentina

    2016-09-01

    The ability to convert renewable biomass into fuels and chemicals is one of the most important steps on our path to green technology and sustainable development. However, the complex composition of biomass poses a major problem for established conversion technologies. The high temperature of thermochemical biomass conversion often leads to the appearance of undesirable byproducts and waste. The catalytic conversion has reduced yield and feedstock range. Plasma-catalytic reforming technology opens a new path for biomass conversion by replacing feedstock-specific catalysts with free radicals generated in the plasma. We studied the plasma-catalytic conversion of several renewable hydrocarbons using the air plasma created by rotating gliding discharge. We found that plasma-catalytic hydrocarbon conversion can be conducted at significantly lower temperatures (500 K) than during the thermochemical ( 1000 K) and catalytic (800 K) conversion. By using gas chromatography, we determined conversion products and found that conversion efficiency of plasma-catalytic conversion reaches over 85%. We used obtained data to determine the energy yield of hydrogen in case of plasma-catalytic reforming of ethanol and compared it with other plasma-based hydrogen-generating systems.

  3. Technology Cooperation Agreement Pilot Project: Development-Friendly Greenhouse Gas Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Keegan, P.

    1998-10-30

    This paper provides an overview of TCAPP, including the methodology, the results to date, and proposed future activities. It includes a detailed description of the technology cooperation frameworks completed by each country, the process that produced them and the plans for how TCAPP will help to implement the directions articulated by the country teams. The US Government initiated the Technology Cooperation Agreement Pilot Project (TCAPP) in August 1997 in recognition of the need to establish a mechanism for implementing Article 4.5 of the Framework Convention on Climate Change. ''The developed country partners shall take all practicable steps to promote, facilitate and finance, as appropriate, the transfer of, or access to, environmentally sound technologies and know-how to other Parties, particularly developing country Parties, to enable them to implement the provisions of the Convention.'' TCAPP builds support for implementing clean energy technologies by facilitating collaboration among the participating countries, the US and other OECD countries, international donors, and the private sector. The governments of Brazil, China, Kazakhstan, Mexico and the Philippines are currently participating and helping to shape this initiative. International donors and the private sector have also been actively engaged in the design and implementation of this pilot program.

  4. Performance Evaluation of Speech Recognition Systems as a Next-Generation Pilot-Vehicle Interface Technology

    Science.gov (United States)

    Arthur, Jarvis J., III; Shelton, Kevin J.; Prinzel, Lawrence J., III; Bailey, Randall E.

    2016-01-01

    During the flight trials known as Gulfstream-V Synthetic Vision Systems Integrated Technology Evaluation (GV-SITE), a Speech Recognition System (SRS) was used by the evaluation pilots. The SRS system was intended to be an intuitive interface for display control (rather than knobs, buttons, etc.). This paper describes the performance of the current "state of the art" Speech Recognition System (SRS). The commercially available technology was evaluated as an application for possible inclusion in commercial aircraft flight decks as a crew-to-vehicle interface. Specifically, the technology is to be used as an interface from aircrew to the onboard displays, controls, and flight management tasks. A flight test of a SRS as well as a laboratory test was conducted.

  5. Benefits of Power and Propulsion Technology for a Piloted Electric Vehicle to an Asteroid

    Science.gov (United States)

    Mercer, Carolyn R.; Oleson, Steven R.; Pencil, Eric J.; Piszczor, Michael F.; Mason, Lee S.; Bury, Kristen M.; Manzella, David H.; Kerslake, Thomas W.; Hojinicki, Jeffrey S.; Brophy, John P.

    2012-01-01

    NASA s goal for human spaceflight is to expand permanent human presence beyond low Earth orbit (LEO). NASA is identifying potential missions and technologies needed to achieve this goal. Mission options include crewed destinations to LEO and the International Space Station; high Earth orbit and geosynchronous orbit; cis-lunar space, lunar orbit, and the surface of the Moon; near-Earth objects; and the moons of Mars, Mars orbit, and the surface of Mars. NASA generated a series of design reference missions to drive out required functions and capabilities for these destinations, focusing first on a piloted mission to a near-Earth asteroid. One conclusion from this exercise was that a solar electric propulsion stage could reduce mission cost by reducing the required number of heavy lift launches and could increase mission reliability by providing a robust architecture for the long-duration crewed mission. Similarly, solar electric vehicles were identified as critical for missions to Mars, including orbiting Mars, landing on its surface, and visiting its moons. This paper describes the parameterized assessment of power and propulsion technologies for a piloted solar electric vehicle to a near-Earth asteroid. The objective of the assessment was to determine technology drivers to advance the state of the art of electric propulsion systems for human exploration. Sensitivity analyses on the performance characteristics of the propulsion and power systems were done to determine potential system-level impacts of improved technology. Starting with a "reasonable vehicle configuration" bounded by an assumed launch date, we introduced technology improvements to determine the system-level benefits (if any) that those technologies might provide. The results of this assessment are discussed and recommendations for future work are described.

  6. Clean coal technology - Study on the pilot project experiment of underground coal gasification

    International Nuclear Information System (INIS)

    Yang Lanhe; Liang Jie; Yu Li

    2003-01-01

    In this paper, the gasification conditions, the gasifier structure, the measuring system and the gasification rationale of a pilot project experiment of underground coal gasification (UCG) in the Liuzhuang Colliery, Tangshan, are illustrated. The technique of two-phase underground coal gasification is proposed. The detection of the moving speed and the length of the gasification working face is made using radon probing technology. An analysis of the experiment results indicates that the output of air gas is 3000 m 3 /h with a heating value of about 4.18 MJ/m 3 , while the output of water gas is 2000 m 3 /h with a heating value of over 11.00 MJ/m 3 , of which H 2 content is above 40% with a maximum of 71.68%. The cyclical time of two-phase underground gasification is 16 h, with 8 h for each phase. This prolongs the time when the high-heating value gas is produced. The moving speed of the gasification working face in two alternative gasifiers is identified, i.e. 0.204 and 0.487 m/d, respectively. The success of the pilot project experiment of the underground gasification reveals the strides that have been made toward the commercialization of the UCG in China. It also further justifies the reasonability and feasibility of the new technology of long channel, big section, two-phase underground gasification. A conclusion is also drawn that the technology of the pilot project experiment can be popularized in old and discarded coal mines

  7. Transition to Glass: Pilot Training for High-Technology Transport Aircraft

    Science.gov (United States)

    Wiener, Earl L.; Chute, Rebecca D.; Moses, John H.

    1999-01-01

    This report examines the activities of a major commercial air carrier between 1993 and late 1996 as it acquired an advanced fleet of high-technology aircraft (Boeing 757). Previously, the airline's fleet consisted of traditional (non-glass) aircraft, and this report examines the transition from a traditional fleet to a glass one. A total of 150 pilots who were entering the B-757 transition training volunteered for the study, which consisted of three query phases: (1) first day of transition training, (2) 3 to 4 months after transition training, and (3) 12 to 14 months after initial operating experience. Of these initial 150 pilots, 99 completed all three phases of the study, with each phase consisting of probes on attitudes and experiences associated with their training and eventual transition to flying the line. In addition to the three questionnaires, 20 in-depth interviews were conducted. Although the primary focus of this study was on the flight training program, additional factors such as technical support, documentation, and training aids were investigated as well. The findings generally indicate that the pilot volunteers were highly motivated and very enthusiastic about their training program. In addition, the group had low levels of apprehension toward automation and expressed a high degree of satisfaction toward their training. However, there were some concerns expressed regarding the deficiencies in some of the training aids and lack of a free-play flight management system training device.

  8. Analysis of Pilot Feedback Regarding the Use of State Awareness Technologies During Complex Situations

    Science.gov (United States)

    Evans, Emory; Young, Steven D.; Daniels, Taumi; Santiago-Espada, Yamira; Etherington, Tim

    2016-01-01

    A flight simulation study was conducted at NASA Langley Research Center to evaluate flight deck systems that (1) predict aircraft energy state and/or autoflight configuration, (2) present the current state and expected future state of automated systems, and/or (3) show the state of flight-critical data systems in use by automated systems and primary flight instruments. Four new technology concepts were evaluated vis-à-vis current state-of-the-art flight deck systems and indicators. This human-in-the-loop study was conducted using commercial airline crews. Scenarios spanned a range of complex conditions and several emulated causal factors and complexity in recent accidents involving loss of state awareness by pilots (e.g. energy state, automation state, and/or system state). Data were collected via questionnaires administered after each flight, audio/video recordings, physiological data, head and eye tracking data, pilot control inputs, and researcher observations. This paper strictly focuses on findings derived from the questionnaire responses. It includes analysis of pilot subjective measures of complexity, decision making, workload, situation awareness, usability, and acceptability.

  9. Can algae-based technologies be an affordable green process for biofuel production and wastewater remediation?

    Science.gov (United States)

    Vo Hoang Nhat, P; Ngo, H H; Guo, W S; Chang, S W; Nguyen, D D; Nguyen, P D; Bui, X T; Zhang, X B; Guo, J B

    2018-05-01

    Algae is a well-known organism that its characteristic is prominent for biofuel production and wastewater remediation. This critical review aims to present the applicability of algae with in-depth discussion regarding three key aspects: (i) characterization of algae for its applications; (ii) the technical approaches and their strengths and drawbacks; and (iii) future perspectives of algae-based technologies. The process optimization and combinations with other chemical and biological processes have generated efficiency, in which bio-oil yield is up to 41.1%. Through life cycle assessment, algae bio-energy achieves high energy return than fossil fuel. Thus, the algae-based technologies can reasonably be considered as green approaches. Although selling price of algae bio-oil is still high (about $2 L -1 ) compared to fossil fuel's price of $1 L -1 , it is expected that the algae bio-oil's price will become acceptable in the next coming decades and potentially dominate 75% of the market. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. Green micro-resistojet research at Delft University of Technology: new options for Cubesat propulsion

    Science.gov (United States)

    Cervone, A.; Zandbergen, B.; Guerrieri, D. C.; De Athayde Costa e Silva, M.; Krusharev, I.; van Zeijl, H.

    2017-03-01

    The aerospace industry is recently expressing a growing interest in green, safe and non-toxic propellants for the propulsion systems of the new generation of space vehicles, which is especially true in the case of Cubesat micro-propulsion systems. Demanding requirements are associated to the future missions and challenges offered by this class of spacecraft, where the availability of a propulsion system might open new possibilities for a wide range of applications including orbital maintenance and transfer, formation flying and attitude control. To accomplish these requirements, Delft University of Technology is currently developing two different concepts of water-propelled micro-thrusters based on MEMS technologies: a free molecular micro-resistojet operating with sublimating solid water (ice) at low plenum gas pressure of less than 600 Pa, and a more conventional micro-resistojet operating with liquid water heated and vaporized by means of a custom designed silicon heating chamber. In this status review paper, the current design and future expected developments of the two micro-propulsion concepts is presented and discussed, together with an initial analysis of the expected performance and potential operational issues. Results of numerical simulations conducted to optimize the design of the heating and expansion slots, as well as a detailed description of the manufacturing steps for the conventional micro-resistojet concept, are presented. Some intended steps for future research activities, including options for thrust intensity and direction control, are briefly introduced.

  11. Role of Information and Communication Technology in Green Supply Chain Implementation and Companies’ Performance

    Directory of Open Access Journals (Sweden)

    José Roberto Mendoza-Fong

    2018-05-01

    Full Text Available The aim of this study is to quantify the impact of information and communication technologies (ICT and its technological updates on the success of the green supply chain (GSC implementation, as well as the benefits this affords. This research is applied to the Mexican maquiladora export industry. A model of structural equations is presented to know the importance of the integration of ICT, combined with the implementation of GSC and the generation of benefits with the use of ICT. The results indicate that there is a direct, positive effect (PE and significant among the four latent variables (LTV analyzed but the most noteworthy is the indirect effect that the variable updating the ICT has on the benefits of GSC, through the variable mediators’ implementation of a GSC, since the direct effect of updating the ICT on the benefits of the implementation of GSC does not become significant. Whereby, it is recommended that the industry integrates and updates its ICT since, using the integrated and updated ICT and the implementation of a GSC, a series of economic, productive and environmental benefits will be created.

  12. Pilot vehicle interface on the advanced fighter technology integration F-16

    Science.gov (United States)

    Dana, W. H.; Smith, W. B.; Howard, J. D.

    1986-01-01

    This paper focuses on the work load aspects of the pilot vehicle interface in regard to the new technologies tested during AMAS Phase II. Subjects discussed in this paper include: a wide field-of-view head-up display; automated maneuvering attack system/sensor tracker system; master modes that configure flight controls and mission avionics; a modified helmet mounted sight; improved multifunction display capability; a voice interactive command system; ride qualities during automated weapon delivery; a color moving map; an advanced digital map display; and a g-induced loss-of-consciousness and spatial disorientation autorecovery system.

  13. Mild desalination demo pilot: New normalization approach to effectively evaluate electrodialysis reversal technology

    Directory of Open Access Journals (Sweden)

    Roel Bisselink

    2016-06-01

    Full Text Available Key performance indicators for characterization of nanofiltration performance are well developed, similar key performance indicators for electrodialysis reversal are however underdeveloped. Under the E4Water project Dow Benelux BV and Evides Industriewater BV operate a pilot facility to compare both technologies for their application to mildly desalinate a variety of brackish water streams. Normalized pressure drop, normalized current efficiency and normalized membrane resistance proved to be a useful tool to interpret process performance and to initiate a cleaning procedure if required. The availability of these normalized key performance indicators enables optimization and process monitoring and control of electrodialysis reversal independent of the continuously changing conditions of the feed water.

  14. Impact of Vicarious Learning Experiences and Goal Setting on Preservice Teachers' Self-Efficacy for Technology Integration: A Pilot Study.

    Science.gov (United States)

    Wang, Ling; Ertmer, Peggy A.

    This pilot study was designed to explore how vicarious learning experiences and goal setting influence preservice teachers' self-efficacy for integrating technology into the classroom. Twenty undergraduate students who were enrolled in an introductory educational technology course at a large midwestern university participated and were assigned…

  15. Green technology into nuclear industry Eligibility of Ambidexter nuclear complex for a generation IV nuclear power system

    International Nuclear Information System (INIS)

    Park, Kwangheon; Koh, Moosung; Ryu, Jeongdong; Kim, Yangeun; Lee, Bumsik; Park, Hyuntack

    2000-01-01

    Green power is being developed up to a point that is feasible not only in an environmental sense, but also in an economical viewpoint. This paper introduces two case studies that applied green technology into nuclear industry. 1) Nuclear laundry: A laundry machine that uses liquid and supercritical Co 2 as a solvent for decontamination of contaminated working dresses in nuclear power plants was developed. The machine consists of a 16 liter reactor, a recovery system with compressors, and storage tanks. All CO 2 used in cleaning is fully recovered and reused in next cleaning, resulting in no production

  16. Flight demonstration of new thruster and green propellant technology on the PRISMA satellite

    Science.gov (United States)

    Anflo, K.; Möllerberg, R.

    2009-11-01

    The concept of a storable liquid monopropellant blend for space applications based on ammonium dinitramide (ADN) was invented in 1997, within a co-operation between the Swedish Space Corporation (SSC) and the Swedish Defense Research Agency (FOI). The objective was to develop a propellant which has higher performance and is safer than hydrazine. The work has been performed under contract from the Swedish National Space Board and ESA. The progress of the development has been presented in several papers since 2000. ECAPS, a subsidiary of the Swedish Space Corporation was established in 2000 with the aim to develop and market the novel "high performance green propellant" (HPGP) technology for space applications. The new technology is based on several innovations and patents w.r.t. propellant formulation and thruster design, including a high temperature resistant catalyst and thrust chamber. The first flight demonstration of the HPGP propulsion system will be performed on PRISMA. PRISMA is an international technology demonstration program with Swedish Space Corporation as the Prime Contractor. This paper describes the performance, characteristics, design and verification of the HPGP propulsion system for PRISMA. Compatibility issues related to using a new propellant with COTS components is also discussed. The PRISMA mission includes two satellites in LEO orbit were the focus is on rendezvous and formation flying. One of the satellites will act as a "target" and the main spacecraft performs rendezvous and formation flying maneuvers, where the ECAPS HPGP propulsion system will provide delta-V capability. The PRISMA CDR was held in January 2007. Integration of the flight propulsion system is about to be finalized. The flight opportunity on PRISMA represents a unique opportunity to demonstrate the HPGP propulsion system in space, and thus take a significant step towards its use in future space applications. The launch of PRISMA scheduled to 2009.

  17. Green light”, the science and technology in everyday life

    International Nuclear Information System (INIS)

    Martin, Hugo R.

    2011-01-01

    In the Province of Córdoba there is a strong tradition of scientific research and technological development. Although there have been initiatives aimed at communicating valuable these activities to the public in mid-2008 a group of local researchers and journalists noted some shortcomings that merit attention. The lack of organic outreach actions translated into a significant gap between the production of scientific knowledge and its appropriation by the local society. As is well known that the gap ends up affecting both the public circulation of knowledge as the research task in itself for lack of adequate level of public debate to guide it, was formed the Network of science communicators of Cordoba. Among the actions from that moment began to take place, is the production of the radio program Green Light: Progress of Science and Technology, produced by the Ministry of Science and Technology Provincial and Regional Faculty of the UTN Córdoba, has been issued by Radio UTN Córdoba (94.3 MHz) for the years 2010 and 2011, having made a place for it in Facebook, which you can give yourself access to the recordings of the programs. This paper describes the main guidelines and methodology for implementing the program, the main topics and results to date. Considering that by mid-2011 the program reached its twenty five edition has been considered the possibility that all the programs are edited in digital format for broadcast by other radio stations in Cordoba, and for use of teachers who have expressed interest in it in the planning of its educational activities at the classroom. Finally, given the particular interest that the issue currently presented some specific comments are made on the issues of disclosure issues related to peaceful applications of atomic energy and the feedback from the audience. (author) [es

  18. Consumer demand for green stormwater management technology in an urban setting: The case of Chicago rain barrels

    Science.gov (United States)

    Ando, Amy W.; Freitas, Luiz P. C.

    2011-12-01

    Hydrological disruption and water pollution from urbanization can be reduced if households in urban areas adopt decentralized storm water controls. We study a citywide municipal subsidized rain-barrel program in the third biggest city in the United States, Chicago, to explore what factors influence whether households purchase this sort of green storm water management technology in an urban setting. Specifically, we regress census-tract level data on the number of rain barrels adopted in different parts of the city on socioeconomic variables, data on local flood frequency, and features of the housing stock. We find that rain-barrel purchases are not correlated with local levels of flooding, even though city residents were told by program managers that rain barrels could alleviate local flooding. Instead, rain barrels are heavily concentrated in places with high-income attitudinally green populations. We do find more rain barrels were adopted in places close to rain-barrel distribution points and near sites of hydrological information campaigns; thus, policy makers might increase green-technology adoption in areas where they can do the most good by reducing transaction costs and providing education programs to those areas. Finally, our results indicate that owner occupancy is positively correlated with green-technology adoption. Low-rise rental housing may have inefficiently low levels of adoption, such that city managers might want to develop programs to encourage storm water management investments by landlords who do not live in their own properties.

  19. Green Roofs

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-08-01

    A New Technology Demonstration Publication Green roofs can improve the energy performance of federal buildings, help manage stormwater, reduce airborne emissions, and mitigate the effects of urban heat islands.

  20. Does Ecuadorians with asthma has preferences in the use of information and communication technologies? Pilot study

    Directory of Open Access Journals (Sweden)

    Iván Chérrez-Ojeda

    2017-12-01

    Full Text Available Background: Inadequate communication between asthmatic patients and their physicians may interfere directly with asthma control. In the last years, the use of information and communication technologies (ICTs it has increased in Latin-America. This technology seems to be a good tool to improve communication and management of the asthmatic patient. Objective: We evaluated the frequency and preference patterns of communication and information technologies in Ecuadorian patients with bronchial asthma. Methods: We conducted a pilot cross-sectional study to identify the frequency and preferences of ICT in patients with asthma. The Spanish version of the Michigan questionnaire was used. Age and educational level were categorized into 3 groups. We used logistic regression between these groups regarding the frequency of use, interest in seeking and receiving information related to their asthma for the age and educational level of the patients. Results: A total of 222 patients participated in our study. The mean age was 45.6 years (SD 17.4, the most common sex was female with 89.25 %. Almost all patients had a cell phone (87.5 % and internet access (62.7 %. The three ICTs most likely to be used to search for or receive information about their illness were WhatsApp, Facebook and Email (p <0.05. Conclusion: Information and communication technologies improve the care of asthmatic patients. In our pilot study email and text messages are the most preferred ICT among patients however WhatsApp and Facebook may be appropriate for certain ages especially young asthmatic. Knowledge of preferences can help the development of ICT in a personalized way and improve the outcomes in patients with asthma.

  1. Bench-Scale and Pilot-Scale Treatment Technologies for the ...

    Science.gov (United States)

    Coal mine water (CMW) is typically treated to remove suspended solids, acidity, and soluble metals, but high concentrations of total dissolved solids (TDS) have been reported to impact the environment at several CMW discharge points. Consequently, various states have established TDS wastewater regulations and the US EPA has proposed a benchmark conductivity limit to reduce TDS impacts in streams near mining sites. Traditional CMW treatment effectively removes some TDS components, but is not effective in removing major salt ions due to their higher solubility. This paper describes the basic principles, effectiveness, advantages and disadvantages of various TDS removal technologies (adsorption, bioremediation, capacitive deionization, desalination, electro-chemical ion exchange, electrocoagulation, electrodialysis, ion exchange, membrane filtration, precipitation, and reverse osmosis) that have at least been tested in bench- and pilot-scale experiments. Recent discussions about new regulations to include total dissolved solids TDS) limits would propel interest in the TDS removal technologies focused on coal mine water. TDS removal is not a new concept and has been developed using different technologies for a number of applications, but coal mine water has unique characteristics (depending on the site, mining process, and solid-water-oxygen interactions), which make it unlikely to have a single technology predominating over others. What are some novel technolog

  2. How does green technology influence CO2 emission in China?--An empirical research based on provincial data of China.

    Science.gov (United States)

    Ding, Weina; Han, Botang; Zhao, Xin; Mazzanti, Massimiliano

    2015-07-01

    This paper investigates the role of green innovations aimed at reducing carbon dioxide emissions as a factor that compensates for growth and population effects. It has been shown from tests that the positive effect of green innovations on carbon emissions exists within a STIRPAT framework from a local perspective. The panel data is derived from China Statistical Yearbook and China Intellectual Property Office covered from 1999 to 2013. In addition,the static panel model was run to estimate the diversity among three typical regions of China. The main result shows that the green technology change has not played a dominant role yet in promoting environmental protection, while a scale effect (Affluence and Population)still prevails, although green patents show positive influences on the CO2 emission reduction inthe whole country as well as the East and West regions, except the Central region. Moreover, it turns out that the classical EKC hypothesis does stand in China, referring to the three regions with the inverted "U" shape. The analysis gives suggestions to the policy makers, which would support enlarging the investment scale on green patents and encourage international corporation with environmental related innovations.

  3. Quantitative Decision Making Model for Carbon Reduction in Road Construction Projects Using Green Technologies

    Directory of Open Access Journals (Sweden)

    Woosik Jang

    2015-08-01

    Full Text Available Numerous countries have established policies for reducing greenhouse gas emissions and have suggested goals pertaining to these reductions. To reach the target reduction amounts, studies on the reduction of carbon emissions have been conducted with regard to all stages and processes in construction projects. According to a study on carbon emissions, the carbon emissions generated during the construction stage of road projects account for approximately 76 to 86% of the total carbon emissions, far exceeding the other stages, such as maintenance or demolition. Therefore, this study aims to develop a quantitative decision making model that supports the application of green technologies (GTs to reduce carbon emissions during the construction stage of road construction projects. First, the authors selected environmental soundness, economic feasibility and constructability as the key assessment indices for evaluating 20 GTs. Second, a fuzzy set/qualitative comparative analysis (FS/QCA was used to establish an objective decision-making model for the assessment of both the quantitative and qualitative characteristics of the key indices. To support the developed model, an expert survey was performed to assess the applicability of each GT from a practical perspective, which was verified with a case study using two additional GTs. The proposed model is expected to support practitioners in the application of suitable GTs to road projects and reduce carbon emissions, resulting in better decision making during road construction projects.

  4. Decolorization of synthetic brilliant green carpet industry dye through fungal co-culture technology.

    Science.gov (United States)

    Kumari, Simpal; Naraian, Ram

    2016-09-15

    Aim of the present study was to evaluate the efficiency of fungal co-culture for the decolorization of synthetic brilliant green carpet industry dye. For this purpose two lignocellulolytic fungi Pleurotus florida (PF) and Rhizoctonia solani (RS) were employed. The study includes determination of enzyme profiles (laccase and peroxidase), dye decolorization efficiency of co-culture and crude enzyme extracts. Both fungi produced laccase and Mn peroxidase and successfully decolorized solutions of different concentrations (2.0, 4.0, 6.0, & 8.0(w/v) of dye. The co-culture resulted highest 98.54% dye decolorization at 2% (w/v) of dye as compared to monocultures (82.12% with PF and 68.89% with RS) during 12 days of submerged fermentation. The lower levels of dyes were rapidly decolorized, while higher levels in slow order as 87.67% decolorization of 8% dye. The promising achievement of the study was remarkable decolorizing efficiency of co-culture over monocultures. The direct treatment of the mono and co-culture enzyme extracts to dye also influenced remarkable. The highest enzymatic decolorization was through combined (PF and RS) extracts, while lesser by monoculture extracts. Based on the observations and potentiality of co-culture technology; further it can be exploited for the bioremediation of areas contaminated with hazardous environmental pollutants including textile and other industry effluents. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Effect of Green Technology Investment on a Production-Inventory System with Carbon Tax

    Directory of Open Access Journals (Sweden)

    Tapan Kumar Datta

    2017-01-01

    Full Text Available Carbon emissions play the central role in global warming. Manufacturing firms are significant contributors to carbon emissions. In many countries, regulatory authorities are taking actions to reduce emissions. Carbon taxation and cap-and-trade schemes are two mechanisms implemented in many countries. In the present paper, the author analyzes a production-inventory model under a carbon tax system. The production rate is assumed to be a decision variable and can be set at any level within machine limits. A proportion of items produced are defective, and this proportion depends on the production rate. Demand depends on the selling price. Unit price is a decreasing function of the production rate. Emissions can be reduced to some extent by capital investment on green technology, and this capital investment amount is a decision variable. Customers are categorized as retail customers and wholesale customers. A discount is offered to the wholesale customers on the regular selling price. The results are illustrated by a numerical example and a sensitivity analysis is performed.

  6. The Chicago Center for Green Technology: life-cycle assessment of a brownfield redevelopment project

    International Nuclear Information System (INIS)

    Brecheisen, Thomas; Theis, Thomas

    2013-01-01

    The sustainable development of brownfields reflects a fundamental, yet logical, shift in thinking and policymaking regarding pollution prevention. Life-cycle assessment (LCA) is a tool that can be used to assist in determining the conformity of brownfield development projects to the sustainability paradigm. LCA was applied to the process of a real brownfield redevelopment project, now known as the Chicago Center for Green Technology, to determine the cumulative energy required to complete the following redevelopment stages: (1) brownfield assessment and remediation, (2) building rehabilitation and site development and (3) ten years of operation. The results of the LCA have shown that operational energy is the dominant life-cycle stage after ten years of operation. The preservation and rehabilitation of the existing building, the installation of renewable energy systems (geothermal and photovoltaic) on-site and the use of more sustainable building products resulted in 72 terajoules (TJ) of avoided energy impacts, which would provide 14 years of operational energy for the site. (letter)

  7. Green biocides, a promising technology: current and future applications to industry and industrial processes.

    Science.gov (United States)

    Ashraf, Muhammad Aqeel; Ullah, Saleem; Ahmad, Irshad; Qureshi, Ahmad Kaleem; Balkhair, Khaled S; Abdur Rehman, Muhammad

    2014-02-01

    The study of biofilms has skyrocketed in recent years due to increased awareness of the pervasiveness and impact of biofilms. It costs the USA literally billions of dollars every year in energy losses, equipment damage, product contamination and medical infections. But biofilms also offer huge potential for cleaning up hazardous waste sites, filtering municipal and industrial water and wastewater, and forming biobarriers to protect soil and groundwater from contamination. The complexity of biofilm activity and behavior requires research contributions from many disciplines such as biochemistry, engineering, mathematics and microbiology. The aim of this review is to provide a comprehensive analysis of emerging novel antimicrobial techniques, including those using myriad organic and inorganic products as well as genetic engineering techniques, the use of coordination complex molecules, composite materials and antimicrobial peptides and the use of lasers as such or their modified use in combination treatments. This review also addresses advanced and recent modifications, including methodological changes, and biocide efficacy enhancing strategies. This review will provide future planners of biofilm control technologies with a broad understanding and perspective on the use of biocides in the field of green developments for a sustainable future. © 2013 Society of Chemical Industry.

  8. The New Mexico Technology Deployment Pilot Project: A technology reinvestment project. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The New Mexico Technology Deployment Project (NMTDP) has been in operation for slightly more than two years. As one of the original TRP projects, NMTDP had the charter to develop and validate a new model for technology extraction which emphasized focused technology collaboration, early industry involvement, and a strong dual use commercialization and productization emphasis. Taken in total, the first two years of the NMTDP have been exceptionally successful, surpassing the goals of the project. This report describes the accomplishments and evolution of the NMTDP to date and discusses the future potential of the project. Despite the end of federal funding, and a subsequent reduction in level of effort, the project partners are committed to continuation of the project.

  9. Green propellant propulsion concepts for space transportation and technology development needs

    NARCIS (Netherlands)

    Haeseler, D.; Bombelli, V.; Vuillermoz, P.; Lo, R.; Maree, A.G.M.; Caramelli, F.

    2004-01-01

    A study has been performed under contract from ESA/ESTEC identifying the development needs in Europe in the field of new green propellant utilization. Criteria for green propellants are defined and discussed. Promising propellants are identified together with their rating w.r.t. those criteria, in

  10. ACT NOW: Kindergarten children, eco citizens at its best - Pilot project in Algeria : Green Buds (Eco Bourgeons); AGIR MAINTENANT : Les enfants de la maternelle, eco citoyens par excellence -- Projet pilote en Algerie : Eco Bourgeons

    Energy Technology Data Exchange (ETDEWEB)

    Zahid, Fatima Djalila; Stambouli, Amine Boudghene; Youcef, Reda Dali

    2010-09-15

    Based on originality, reproducibility, impact, duration and consistence of action, the Green Buds pilot program (Eco Bourgeons) in Algeria under the wings of the 'El Baraim' association has for slogan: 'Consume adequately, live better' ('Consommons juste, vivons mieux'). The long term objective: Introduce the ED as a subject in the national education program. [French] Inculquer des eco gestes a 672 enfants de la maternelle dans le sens de la ME a travers un programme educatif riche et adequat, c'est eduquer nos futurs citoyens (industriels, dirigeants, etc.) au respect de nos ressources energetiques et de l'environnement. Se basant sur les criteres de l'originalite, la reproductibilite, l'impact, la duree et la ''consistance'' de l'action, le projet 'Eco Bourgeons' pilote en Algerie sous tutelle de l'association 'El Baraim' a pour slogan : 'Consommons juste, vivons mieux'. L'objectif a long terme: Introduire la ME comme matiere dans le Programme de l'Education Nationale.

  11. Green industrial policy

    OpenAIRE

    Dani Rodrik

    2014-01-01

    Green growth requires green technologies: production techniques that economize on exhaustible resources and emit fewer greenhouse gases. The availability of green technologies both lowers social costs in the transition to a green growth path and helps achieve a satisfactory rate of material progress under that path. The theoretical case in favour of using industrial policy to facilitate green growth is quite strong. Economists’ traditional scepticism on industrial policy is grounded instead o...

  12. Study of Green Shipping Technologies - Harnessing Wind, Waves and Solar Power in New Generation Marine Propulsion Systems

    Directory of Open Access Journals (Sweden)

    Grzegorz Rutkowski

    2016-12-01

    Full Text Available The purpose and scope of this paper is to describe the complexity of the new generation marine propulsion technologies implemented in the shipping industry to promote green ships concept and change the view of sea transportation to a more ecological and environment-friendly. Harnessing wind, waves and solar power in shipping industry can help the ship’s owners reduce the operational costs. Reducing fuel consumption results in producing less emissions and provides a clean source of renewable energy. Green shipping technologies can also effectively increase the operating range of vessels and help drive sea transportation towards a greener future and contribute to the global reduction of harmful gas emissions from the world's shipping fleets.

  13. Assessing cancer survivors' needs using web-based technology: a pilot study.

    Science.gov (United States)

    Lavoie Smith, Ellen M; Skalla, Karen; Li, Zhongze; Onega, Tracy; Rhoda, June; Gates, Charlene; Litterini, Amy; Scott, Mary R

    2012-02-01

    Development of cancer survivor resources has been hampered by lack of knowledge regarding survivors' needs. The main study aim was to pilot test a Web-based cancer survivor needs assessment survey. The second aim was to pilot three sampling approaches. This cross-sectional study was conducted at the Norris Cotton Cancer Center and nine community-based clinics serving urban and rural populations. Population-based and convenience sampling approaches were used to recruit 547 participants over 4 months. Participants completed a Web-based cancer survivor needs assessment survey. Respondents were mainly white (98%), married (71%) women (80%) with a college education (96%). Although most (66%) (n = 362) had been diagnosed with breast cancer, other cancer diagnoses were represented. Participants reported fatigue (47%), forgetfulness (39%), joint pain (34%), anxiety (31%), trouble sleeping (28%), peripheral neuropathy (27%), inflexibility (23%), and weight gain (23%). Survivors with nonbreast solid tumor malignancies reported more problems than those with breast or hematologic malignancies (P range = .037 to losing weight (74.2%), decreasing fatigue (50%), and improving flexibility (69.3%), sleep (68.5%), and memory (60.2%). Results supported that cancer survivors struggle with many enduring problems. Web-based technology will facilitate future exploration of unmet needs.

  14. Lessons from the pilot of a mobile application to map assistive technology suppliers in Africa.

    Science.gov (United States)

    Visagie, Surona J; Matter, Rebecca; Kayange, George M; Chiwaula, Mussa; Harniss, Mark; Mji, Gubela; Scheffler, Elsje

    2018-01-01

    A pilot project to develop and implement a mobile smartphone application (App) that tracks and maps assistive technology (AT) availability in southern Africa was launched in Botswana in 2016. The App was developed and tested through an iterative process. The concept of the App (AT-Info-Map) was well received by most stakeholders within the pilot country, and broader networks. Several technical and logistical obstacles were encountered. These included high data costs; difficulty in accessing AT information from the public healthcare sector, the largest supplier of AT; and the high human resource demand of collecting and keeping up-to-date device-level information within a complex and fragmented supply sector that spans private, public and civil society entities. The challenges were dealt with by keeping the data burden low and eliminating product-level tracking. The App design was expanded to include disability services, contextually specific AT categories and make navigation more intuitive. Long-term sustainability strategies like generating funding through advertisements on the App or supplier usage fees must be explored. Outreach and sensitisation programmes about both the App and AT in general must be intensified. The project team must continually strengthen partnerships with private and public stakeholders to ensure ongoing project engagement. The lessons learnt might be of value to others who wish to embark on initiatives in AT and/or implement Apps in health or disability in southern Africa and in low-resourced settings around the world.

  15. Energy Performance Contract models for the diffusion of green-manufacturing technologies in China: A stakeholder analysis from SMEs’ perspective

    International Nuclear Information System (INIS)

    Liu, Peng; Zhou, Yuan; Zhou, Dillon K.; Xue, Lan

    2017-01-01

    Small-and-medium-sized enterprises (SMEs) are significant to China's emission reduction programme. This research aims to improve our understanding of the challenge of diffusing green-manufacturing technologies among SMEs in China. Specifically, this study examines the Chinese Government's effort to facilitate reduction of energy consumption among SMEs through Energy Performance Contracts (EPCs) to incentivize domestic manufacturers to adopt energy efficient measures (EEMs) in order to reduce demand for energy and corresponding drop in emissions. The data is gathered from relevant EPC stakeholders in the National Motor Upgrading Demonstration Project and its implementation in Dongguan city, which is based on 30 in-depth interviews and 6 focus group discussions. Using stakeholder analysis, this study finds that guaranteed energy savings model is the favorite model in implementation, given the gained benefits outweigh committed resources, and the control capability overrides possible risks among the two core stakeholders. The outcomes of this study may allow the government to have a clear understanding of stakeholder perception of the different EPC models used in China so the design and deployment of these mechanisms can be improved. - Highlights: • Examine the barriers faced by green technologies when they are promoted to SMEs on a large scale. • Explain why green technology diffusion is thwarted when stakeholders cannot reach compromises. • Find that the guaranteed energy savings model is the best mechanism for upgrading SMEs. • Note that new EPC models and new policies are needed to increase stakeholders’ adoption rate.

  16. Pilot inquiry on the perception of the CO2 capture and sequestration technology in France

    International Nuclear Information System (INIS)

    Minh, Ha-Duong; Mardon, G.

    2007-06-01

    We led a communication experiment on the perception of carbon capture and sequestration, an emergent climate change mitigation technology. We tested the sensitivity of the approbation level to the effects of 1/ Additional information on the risks and 2/ Semantics (Storage versus Sequestration). We collected about 600 answers using on-line self-selected survey. Results reveals that semantics can have a significant effect on the level of appreciation. The survey also shows the opinion is not firmly anchored, as an additional information has a significant effect. The information about risks led respondents to decrease their level of appreciation. Admittedly, this method does not allow to control well the sample biases. The results only allow to reject the hypothesis 'Semantic and additional information are neutral'. This pilot allowed us to elaborate a full-scale experiment, given to a representative sample of the French population in April 2007. (authors)

  17. Binaural beat technology in humans: a pilot study to assess psychologic and physiologic effects.

    Science.gov (United States)

    Wahbeh, Helané; Calabrese, Carlo; Zwickey, Heather

    2007-01-01

    Binaural beat technology (BBT) products are sold internationally as personal development and health improvement tools. Producers suggest benefit from regular listening to binaural beats including reduced stress and anxiety, and increased focus, concentration, motivation, confidence, and depth in meditation. Binaural beats are auditory brainstem responses that originate in the superior olivary nucleus as a result of different frequency auditory stimuli provided to each ear. Listeners to binaural beat "hear" a beat at a frequency equal to the difference between the frequencies of the applied tones. The objectives of this pilot study were to gather preliminary data on psychologic and physiologic effects of 60 days daily use of BBT for hypothesis generation and to assess compliance, feasibility, and safety for future studies. Uncontrolled pilot study. Eight healthy adults participated in the study. Participants listened to a CD with delta (0-4 Hz) binaural beat frequencies daily for 60 days. Psychologic and physiological data were collected before and after a 60-day intervention. PSYCHOLOGIC: Depression (Beck Depression Inventory-2), anxiety (State-Trait Anxiety Inventory), mood (Profile of Mood States), absorption (Tellegen Absorption Scale) and quality of Life (World Health Organization-Quality of Life Inventory). PHYSIOLOGICAL: Cortisol, dehydroepiandrosterone, melatonin, insulin-like growth factor-1, serotonin, dopamine, epinephrine, norepinephrine, weight, blood pressure, high sensitivity C-reactive protein. There was a decrease in trait anxiety (p = 0.004), an increase in quality of life (p = 0.03), and a decrease in insulin-like growth factor-1 (p = 0.01) and dopamine (p = 0.02) observed between pre- and postintervention measurements. Binaural beat technology may exhibit positive effect on self-reported psychologic measures, especially anxiety. Further research is warranted to explore the effects on anxiety using a larger, randomized and controlled trial.

  18. Research cooperation project on environmentally friendly technology for highly efficient mineral resources extraction and treatment. Detail design for pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Photographs and drawings were edited into a book in relation with a joint project for environment preservation technologies in high-efficiency extraction and treatment of mineral resources, and detail design for a pilot plant. The book classified the related devices into fabricated devices, purchased devices and electrical devices, and contains detailed drawings and photographs thereof. (NEDO)

  19. Exploring Resource Security Policy and Green Science and Technology in Asia

    Science.gov (United States)

    2014-04-01

    consumption patterns, diets and resource use of its population that will only increase 1...Indonesia, Vietnam, Thailand and Malaysia - have started to put, if not ramped up existing, green policies in place. 9 In India, the government’s

  20. E3 Success Story -Reducing Rework With the Lean and Green Advantage: Metal Finishing Technologies, Inc

    Science.gov (United States)

    Green Suppliers Network representatives Judy Wlodarczyk and Bill Caplan, of CONNSTEP, Inc., trained the MFT review team, and together they completed current and future state value stream maps for the zinc plating line.

  1. Role of liability preferences in societal technology choices: results of a pilot study

    International Nuclear Information System (INIS)

    Cantor, R.; Rayner, S.; Braid, B.

    1985-01-01

    At the 1984 Annual Meeting of the Society for Risk Analysis, Steve Rayner presented a paper that challenged the conventional wisdom of risk management research. In that paper, he argued that resolving the question, ''How safe is safe enough.'' is less important in making societal technology choices than ''How fair is safe enough.'' Adopting the fairness question as the concern of risk management would imply that the process of technology choice explicitly recognize the preferred principles different parties hold with respect to obtaining consent from those affected by the risks, distributing the liabilities, and justifying trust in the relevant institutions. This paper discusses a recent empirical pilot study which explored the fairness hypothesis in the context of nuclear power. Individual interviews and focus groups were conducted to examine whether or not preferred principles for liability distributions were consistent with those suggested by the cultural characteristics of the constituency. The results suggest that for this type of societal technology choice, violation of these preferred principles may be a major source of the conflict between different constituencies. Additionally, the study contributes towards the development of a new approach in risk management that combines the cultural model of risk perceptions with the decision-theoretic approaches found in economics and psychology

  2. Green in the heart or greens in the wallet? The spatial uptake of small-scale renewable technologies

    International Nuclear Information System (INIS)

    Allan, Grant J.; McIntyre, Stuart G.

    2017-01-01

    The introduction of a Feed-in-Tariff (FIT) support mechanism has spurred development of small-scale domestic renewable electricity generation throughout Great Britain (GB), however the spatial pattern of uptake has been uneven, suggesting that local, as well as between neighbourhood, factors may be at important. As well as confirming that local socio-economic factors, including wealth, housing type and population density are found to be important in explaining uptake of this policy, local “green” attitudes – measured in three different ways – are shown not to be important. Existing local technical expertise, proxied for using data on small-scale renewable electricity devices in each area prior to the introduction of FIT, is an important factor in explaining subsequent adoption. Critically, we also find that there are spatial (i.e. between neighbourhood) processes explaining the uptake of these technologies. Taken together, our results suggest that, as currently designed, FIT policy may be regressive in income and could exacerbate spatial economic inequalities. - Highlights: • First examination of uptake of renewable capacity under the UK's Feed-In Tariff. • Analyse socio-economic and environmental factors as well as spatial processes. • Wealth, population density, property type & existing capacity affect local FIT uptake. • Spatial process confirms effects between neighbourhoods, neglected in current policy Highlights.

  3. Implementation of Health Information Technology in Routine Care for Fibromyalgia: Pilot Study.

    Science.gov (United States)

    Sparks, Toni; Kawi, Jennifer; Menzel, Nancy Nivison; Hartley, Kendall

    2016-02-01

    Fibromyalgia management remains complicated and challenging. Health information technology is an evidence-based, nonpharmacological self and symptom management strategy, but few studies have evaluated its feasibility for managing fibromyalgia patients in clinical practice. FibroGuide is an example of an evidence-based, interactive, and computer-based program comprised of 10 educational modules on fibromyalgia. Study aims were to: (1) develop a process for implementing FibroGuide into the routine care of patients with fibromyalgia, (2) evaluate the overall impact on fibromyalgia before and after a 12-week implementation, and (3) assess patient perspectives on using FibroGuide health information technology to assist in self-management. In this pilot study, 35 participants with fibromyalgia were recruited from an Advanced Practice Registered Nurse's outpatient clinic. Using a descriptive design, quantitative data analysis was employed to address study aims. Based on data collection pre- and post-intervention using paired samples testing, a statistically significant change (p = .017) was observed in overall fibromyalgia impact (improved symptom severity, activity, and function). Majority felt that FibroGuide was helpful as part of their routine care, and nearly half reported that it assisted in their self-management. Although 65% noted that technology was an effective and efficient way to receive education for fibromyalgia management, 57% preferred talking to healthcare providers. Larger longitudinal studies are needed on the use of health information technology in fibromyalgia, evaluating both statistical and clinical significance, while decreasing barriers to participant use for this promising adjunct to clinical management. Providers need to be well educated on supporting self-management strategies and health information technology. Copyright © 2016 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  4. Mobile technology for obesity prevention: a randomized pilot study in racial- and ethnic-minority girls.

    Science.gov (United States)

    Nollen, Nicole L; Mayo, Matthew S; Carlson, Susan E; Rapoff, Michael A; Goggin, Kathy J; Ellerbeck, Edward F

    2014-04-01

    Mobile technologies have wide-scale reach and disseminability, but no known studies have examined mobile technologies as a stand-alone tool to improve obesity-related behaviors of at-risk youth. To test a 12-week mobile technology intervention for use and estimate effect sizes for a fully powered trial. Fifty-one low-income, racial/ethnic-minority girls aged 9-14 years were randomized to a mobile technology (n=26) or control (n=25) condition. Both conditions lasted 12 weeks and targeted fruits/vegetables (FVs; Weeks 1-4); sugar-sweetened beverages (SSBs; Weeks 5-8), and screen time (Weeks 9-12). The mobile intervention prompted real-time goal setting and self-monitoring and provided tips, feedback, and positive reinforcement related to the target behaviors. Controls received the same content in a written manual but no prompting. Outcomes included device utilization and effect size estimates of FVs, SSBs, screen time, and BMI. Data were collected and analyzed in 2011-2012. Mobile technology girls used the program on 63% of days and exhibited trends toward increased FVs (+0.88, p=0.08) and decreased SSBs (-0.33, p=0.09). The adjusted difference between groups of 1.0 servings of FVs (p=0.13) and 0.35 servings of SSBs (p=0.25) indicated small to moderate effects of the intervention (Cohen's d=0.44 and -0.34, respectively). No differences were observed for screen time or BMI. A stand-alone mobile app may produce small to moderate effects for FVs and SSBs. Given the extensive reach of mobile devices, this pilot study demonstrates the need for larger-scale testing of similar programs to address obesity-related behaviors in high-risk youth. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  5. Green Component Procurement Collaboration for Improving Supply Chain Management in the High Technology Industries: A Case Study from the Systems Perspective

    OpenAIRE

    Min-Ren Yan; Kuo-Ming Chien; Tai-Ning Yang

    2016-01-01

    The impacts of high technology industries have been growing increasingly to technological innovations and global economic developments, while the concerns in sustainability are calling for facilitating green materials and cleaner production in the industrial value chains. Today’s manufacturing companies are not striving for individual capacities but for the effective working with green supply chains. However, in addition to environmental and social objectives, cost and economic feasibility ha...

  6. Quality Assurance in Environmental Technology Verification (ETV): Analysis and Impact on the EU ETV Pilot Programme Performance

    Science.gov (United States)

    Molenda, Michał; Ratman-Kłosińska, Izabela

    2018-03-01

    Many innovative environmental technologies never reach the market because they are new and cannot demonstrate a successful track record of previous applications. This fact is a serious obstacle on their way to the market. Lack of credible data on the performance of a technology causes mistrust of investors in innovations, especially from public sector, who seek effective solutions however without compromising the technical and financial risks associated with their implementation. Environmental technology verification (ETV) offers a credible, robust and transparent process that results in a third party confirmation of the claims made by the providers about the performance of the novel environmental technologies. Verifications of performance are supported by high quality, independent test data. In that way ETV as a tool helps establish vendor credibility and buyer confidence. Several countries across the world have implemented ETV in the form of national or regional programmes. ETV in the European Union was implemented as a voluntary scheme if a form of a pilot programme. The European Commission launched the Environmental Technology Pilot Programme of the European Union (EU ETV) in 2011. The paper describes the European model of ETV set up and put to operation under the Pilot Programme of Environmental Technologies Verification of the European Union. The goal, objectives, technological scope, involved entities are presented. An attempt has been made to summarise the results of the EU ETV scheme performance available for the period of 2012 when the programme has become fully operational until the first half of 2016. The study was aimed at analysing the overall organisation and efficiency of the EU ETV Pilot Programme. The study was based on the analysis of the documents the operation of the EU ETV system. For this purpose, a relevant statistical analysis of the data on the performance of the EU ETV system provided by the European Commission was carried out.

  7. The research and application of green computer room environmental monitoring system based on internet of things technology

    Science.gov (United States)

    Wei, Wang; Chongchao, Pan; Yikai, Liang; Gang, Li

    2017-11-01

    With the rapid development of information technology, the scale of data center increases quickly, and the energy consumption of computer room also increases rapidly, among which, energy consumption of air conditioning cooling makes up a large proportion. How to apply new technology to reduce the energy consumption of the computer room becomes an important topic of energy saving in the current research. This paper study internet of things technology, and design a kind of green computer room environmental monitoring system. In the system, we can get the real-time environment data from the application of wireless sensor network technology, which will be showed in a creative way of three-dimensional effect. In the environment monitor, we can get the computer room assets view, temperature cloud view, humidity cloud view, microenvironment view and so on. Thus according to the condition of the microenvironment, we can adjust the air volume, temperature and humidity parameters of the air conditioning for the individual equipment cabinet to realize the precise air conditioning refrigeration. And this can reduce the energy consumption of air conditioning, as a result, the overall energy consumption of the green computer room will reduce greatly. At the same time, we apply this project in the computer center of Weihai, and after a year of test and running, we find that it took a good energy saving effect, which fully verified the effectiveness of this project on the energy conservation of the computer room.

  8. EPA's Green Roof Research

    Science.gov (United States)

    This is a presentation on the basics of green roof technology. The presentation highlights some of the recent ORD research projects on green roofs and provices insight for the end user as to the benefits for green roof technology. It provides links to currently available EPA re...

  9. Unfolding Green Defense

    DEFF Research Database (Denmark)

    Larsen, Kristian Knus

    2015-01-01

    In recent years, many states have developed and implemented green solutions for defense. Building on these initiatives NATO formulated the NATO Green Defence Framework in 2014. The framework provides a broad basis for cooperation within the Alliance on green solutions for defense. This report aims...... to inform and support the further development of green solutions by unfolding how green technologies and green strategies have been developed and used to handle current security challenges. The report, initially, focuses on the security challenges that are being linked to green defense, namely fuel...... consumption in military operations, defense expenditure, energy security, and global climate change. The report then proceeds to introduce the NATO Green Defence Framework before exploring specific current uses of green technologies and green strategies for defense. The report concludes that a number...

  10. Piloting a Sex-Specific, Technology-Enhanced, Active Learning Intervention for Stroke Prevention in Women.

    Science.gov (United States)

    Dirickson, Amanda; Stutzman, Sonja E; Alberts, Mark J; Novakovic, Roberta L; Stowe, Ann M; Beal, Claudia C; Goldberg, Mark P; Olson, DaiWai M

    2017-12-01

    Recent studies reveal deficiencies in stroke awareness and knowledge of risk factors among women. Existing stroke education interventions may not address common and sex-specific risk factors in the population with the highest stroke-related rate of mortality. This pilot study assessed the efficacy of a technology-enhanced, sex-specific educational program ("SISTERS") for women's knowledge of stroke. This was an experimental pretest-posttest design. The sample consisted of 150 women (mean age, 55 years) with at least 1 stroke risk factor. Participants were randomized to either the intervention (n = 75) or control (n = 75) group. Data were collected at baseline and at a 2-week posttest. There was no statistically significant difference in mean knowledge score (P = .67), mean confidence score (P = .77), or mean accuracy score (P = .75) between the intervention and control groups at posttest. Regression analysis revealed that older age was associated with lower knowledge scores (P < .001) and lower confidence scores (P < .001). After controlling for age, the SISTERS program was associated with a statistically significant difference in knowledge (P < .001) and confidence (P < .001). Although no change occurred overall, after controlling for age, there was a statistically significant benefit. Older women may have less comfort with technology and require consideration for cognitive differences.

  11. The green building envelope : Vertical greening

    NARCIS (Netherlands)

    Ottelé, M.

    2011-01-01

    Planting on roofs and façades is one of the most innovative and fastest developing fields of green technologies with respect to the built environment and horticulture. This thesis is focused on vertical greening of structures and to the multi-scale benefits of vegetation. Vertical green can improve

  12. Science and Technology in Regional Flood Disaster Pilots: A GEOSS Capacity Building Imperative

    Science.gov (United States)

    Frye, S. W.; Cappelaere, P. G.; Mandl, D.

    2009-12-01

    This paper describes activities and results of melding basic scientific research in remote sensing with applied science and technology development and infusion to implement regional flood pilot programs in Sub-Saharan Africa and the Caribbean Region. These regional flood pilots support local and national agency involvement in emergency response and humanitarian assistance activities using orbital, sub-orbital, and in-situ sensors combined with predictive models and socio-economic data to form a cohesive, interoperable set of systems that cover the full cycle of disaster mitigation, warning, response, and recovery for societal benefit. Global satellite coverage is coordinated through the Committee on Earth Observation Satellites (CEOS) in conjunction with the United Nations Space Platform for Space-based Information for Disaster Management and Emergency Response (UN-SPIDER). Other international non-government organizations plus regional and local agencies all play individual roles in exploring the science results, applying the observations and model outputs to form geo-referenced maps that provide improved situational awareness and environmental intelligence for disaster management. The improvements to flood forecast and nowcast outputs include higher resolution drainage and hydrology mapping, improved retrievals for microwave data for soil moisture, plus improved validation from regional ground truth databases. Flow gauge and river depth archive data from local assets provide improved validation of flood model results. Incorporation of atmospheric correction using ground truth data from calibration and validation sites enables better detection and classification of plant species identification and plant stress. Open Geospatial Consortium (OGC) standards for Sensor Web Enablement (SWE) are implemented to provide internet access to satellite tasking, data processing, and distribution/notification in addition to model outputs and other local and regional data sets

  13. Research and Practice on New Technology for Architectural Green Environment in Cities

    Science.gov (United States)

    Wu, Zhang; hvung Cho, Jeung

    2018-03-01

    The importance of urban development has become a topic that has been discussed in all industries for a long time. How to make rational use of existing limited resources for redevelopment has become the primary issue in the future construction of a city. Designers have introduced green three-dimensional environmental design for a city into modern urban design. At present, Japan and South Korea focus on development of green three-dimensional environmental projects for cities, in which application of green three-dimensional building design is particularly prominent. This article learns from successful cases on urban three-dimensional environment design in Japan and Korea and makes profound discussion about how new city-model agriculture develops in China for the purpose of solving the problem of urban construction in China in the aspects of theory and Practice.

  14. Technology-enhanced program for child disruptive behavior disorders: development and pilot randomized control trial.

    Science.gov (United States)

    Jones, Deborah J; Forehand, Rex; Cuellar, Jessica; Parent, Justin; Honeycutt, Amanda; Khavjou, Olga; Gonzalez, Michelle; Anton, Margaret; Newey, Greg A

    2014-01-01

    Early onset disruptive behavior disorders are overrepresented in low-income families; yet these families are less likely to engage in behavioral parent training (BPT) than other groups. This project aimed to develop and pilot test a technology-enhanced version of one evidence-based BPT program, Helping the Noncompliant Child (HNC). The aim was to increase engagement of low-income families and, in turn, child behavior outcomes, with potential cost-savings associated with greater treatment efficiency. Low-income families of 3- to 8-year-old children with clinically significant disruptive behaviors were randomized to and completed standard HNC (n = 8) or Technology-Enhanced HNC (TE-HNC; n = 7). On average, caregivers were 37 years old; 87% were female, and 80% worked at least part-time. More than half (53%) of the youth were boys; the average age of the sample was 5.67 years. All families received the standard HNC program; however, TE-HNC also included the following smartphone enhancements: (a) skills video series, (b) brief daily surveys, (c) text message reminders, (d) video recording home practice, and (e) midweek video calls. TE-HNC yielded larger effect sizes than HNC for all engagement outcomes. Both groups yielded clinically significant improvements in disruptive behavior; however, findings suggest that the greater program engagement associated with TE-HNC boosted child treatment outcome. Further evidence for the boost afforded by the technology is revealed in family responses to postassessment interviews. Finally, cost analysis suggests that TE-HNC families also required fewer sessions than HNC families to complete the program, an efficiency that did not compromise family satisfaction. TE-HNC shows promise as an innovative approach to engaging low-income families in BPT with potential cost-savings and, therefore, merits further investigation on a larger scale.

  15. A comparison of dental ultrasonic technologies on subgingival calculus removal: a pilot study.

    Science.gov (United States)

    Silva, Lidia Brión; Hodges, Kathleen O; Calley, Kristin Hamman; Seikel, John A

    2012-01-01

    This pilot study compared the clinical endpoints of the magnetostrictive and piezoelectric ultrasonic instruments on calculus removal. The null hypothesis stated that there is no statistically significant difference in calculus removal between the 2 instruments. A quasi-experimental pre- and post-test design was used. Eighteen participants were included. The magnetostrictive and piezoelectric ultrasonic instruments were used in 2 assigned contra-lateral quadrants on each participant. A data collector, blind to treatment assignment, assessed the calculus on 6 predetermined tooth sites before and after ultrasonic instrumentation. Calculus size was evaluated using ordinal measurements on a 4 point scale (0, 1, 2, 3). Subjects were required to have size 2 or 3 calculus deposit on the 6 predetermined sites. One clinician instrumented the pre-assigned quadrants. A maximum time of 20 minutes of instrumentation was allowed with each technology. Immediately after instrumentation, the data collector then conducted the post-test calculus evaluation. The repeated analysis of variance (ANOVA) was used to analyze the pre- and post-test calculus data (p≤0.05). The null hypothesis was accepted indicating that there is no statistically significant difference in calculus removal when comparing technologies (p≤0.05). Therefore, under similar conditions, both technologies removed the same amount of calculus. This research design could be used as a foundation for continued research in this field. Future studies include implementing this study design with a larger sample size and/or modifying the study design to include multiple clinicians who are data collectors. Also, deposit removal with periodontal maintenance patients could be explored.

  16. Technology-based functional assessment in early childhood intervention: a pilot study.

    Science.gov (United States)

    Khetani, Mary A; McManus, Beth M; Arestad, Kristen; Richardson, Zachary; Charlifue-Smith, Renee; Rosenberg, Cordelia; Rigau, Briana

    2018-01-01

    Electronic patient-reported outcomes (e-PROs) may provide valid and feasible options for obtaining family input on their child's functioning for care planning and outcome monitoring, but they have not been adopted into early intervention (EI). The purpose of this pilot study was to evaluate the feasibility of implementing technology-based functional assessment into EI practice and to examine child, family, service, and environmental correlates of caregiver-reported child functioning in the home. In a cross-sectional design, eight individual EI providers participated in a 90-min technology-based functional assessment training to recruit participants and a 60-min semi-structured focus group post data collection. Participants completed the Young Children's Participation and Environment Measure (YC-PEM) home section online and Pediatric Evaluation of Disability Inventory Computer Adaptive Test (PEDI-CAT) via iPad. Participants' EI service use data were obtained from administrative records. A total of 37 caregivers of children between 6 and 35 months old (mean age = 19.4, SD = 7.7) enrolled, a rate of 44% (37/84) in 2.5 months. Providers suggested expanding staff training, gathering data during scheduled evaluations, and providing caregivers and providers with access to assessment summaries. Caregivers wanted their child's participation to change in 56% of home activities. Lower caregiver education and higher EI intensity were related to less child involvement in home activities. Implementing technology-based functional assessment is feasible with modifications, and these data can be useful for highlighting child, family, and EI service correlates of caregiver-reported child functioning that merit further study. Feasibility results informed protocol modifications related to EI provider training, timing of data collection, and management of EI service use data extraction, as preparation for a subsequent scale-up study that is underway.

  17. Gamma radiation pretreatment in processing technology of ruminant feed: a pilot scale trial run

    International Nuclear Information System (INIS)

    Mat Rasol Awang

    2002-01-01

    The technology for production ruminant feed from agriculture by-product remains scare despite plentiful availability of feeding materials worldwide. Factors that prohibit the process technology development suggested that their peculiar physical make up, high cost of production and inferior product quality compared to established raw material, had consequently impeding the effort. In Malaysia, only two pilot plants exist; they demonstrate utilization of Oil Palm Frond (OPF) into feed. In the case of OPF in situ utilization as feed, farmers use chipper machine or shredder to process it. Other by-products have not been successfully exploited, except for Palm Kernel Cake (PKC) and Palm Oil Mill Effluent (POME) that already in commercial operation. In view of the by-product availability as feeding material in ruminant feeding system and availability of new chipper and shredder machines, the prospect of processing agriculture by-products into feed is expected to be a promising business venture. This paper describes the technology for production of new feed from oil palm Empty Fruit Bunch (EFB). It elaborates on Sterifeed Plant Operation based on plant capacity of 0.5 ton/day production. The operation aspects discuss raw materials handling and pretreatment involving γ-ray as an integral part of the total system. In this process EFB initially pasteurized and predigested by fungi in fermentation process into feed materials, and the product were fed in fresh form to animal. The operation exercise had established actual process flow, identified problems and process drawbacks. Based on this experience, availability of localized raw materials EFB at the palm oil mill and rapid development of processing machinery, it is very likely that a commercially viable feed processing plant can be established in the near future. (Author)

  18. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- monitoring technology

    International Nuclear Information System (INIS)

    Johnson, H.R.; Overbey, W.K. Jr.; Molnar, D.L.

    1994-02-01

    The objective of this study was to investigate and evaluate existing proven technologies for the monitoring of hazardous waste sites during remediation activities and to protect the health and safety of all related entities while complying with government regulations. The study began with a literature search to determine manufacturers and related instrumentation which would be applicable to the most complex (in terms of toxicity and mediums affected) sites. Criteria for monitoring and analyses were established and a functional analysis was performed to select the most appropriate instrumentation available. Gas Chromatography/Mass Spectrometry is the most widely accepted method for generating quantitative data given the characterization of the Winfield site. Fourier Transform Infrared Spectroscopy, while not a new technology, has the distinct advantage of measuring simultaneously hundreds of gaseous pollutants which can also be sparged from water and this technology received the highest score as per the functional analysis. To protect workers and the public surrounding remediation sites which are known to contain VOCs, on site monitoring prior to, and during the excavation operations, is recommended until enough data are obtained to assess the health risks to workers. The conclusion of this study is to recommend evaluation of both the mobile GC/MS and FTIR systems simultaneously in identical operating conditions

  19. Power generation from thermoelectric system-embedded Plexiglas for green building technology

    KAUST Repository

    Inayat, Salman Bin; Hussain, Muhammad Mustafa

    2012-01-01

    10 nW of thermopower generation with a temperature gradient of 21 °C. Albeit tiny at this point with non-optimized design and development, this concept can be extended for relatively large-scale power generation as an additional power supply for green

  20. Green micro-resistojet research at Delft University of Technology: the new frontiers of Cubesat propulsion

    NARCIS (Netherlands)

    Cervone, A.; Zandbergen, B.T.C.; Cordeiro Guerrieri, D. C.; de Athayde Costa e Silva, Marsil A. C.; van Zeijl, H.W.

    2016-01-01

    The aerospace industry is recently expressing a growing interest in green, safe and non-toxic propellants for the propulsion systems of the new generation of space vehicles, which is especially true in the case of Cubesat micro-propulsion systems. Demanding requirements are associated to the future

  1. Comparing Profits from Shrimp Aquaculture with and without Green-Water Technology in the Philippines

    NARCIS (Netherlands)

    Bosma, R.H.; Tendencia, E.A.

    2014-01-01

    To reduce disease impact, Philippine farmers developed the green-water (GW) system, which has been spreading rapidly since 2008. In the most applied GW-system, the shrimp pond receives water from a reservoir stocked with tilapia. We collected financial data on GW and non-GW systems from farms having

  2. Green lights program in China

    Energy Technology Data Exchange (ETDEWEB)

    Dadi, Zhuo; Hong, Liu [Beijing Energy Efficiency Center (China)

    1996-12-31

    In China`s 9th 5-year plan (1996-2000), the Chinese government has placed high priority on energy conservation. The China Green Lights Program (CGLP) is listed as one of the key projects of energy conservation. The basic strategy of the CGLP is to mobilise all of the potential contributors to participate in the program, and to use market signals and supplementary non-market instruments to facilitate its implementation. Governmental funds and loans will be used as seed money to attract private participation in the program. The program contains the following elements: (1) Information dissemination to educate the public on the economic and other values of the program and to provide CGLP information to increase consumer awareness and, as a result, increase the demand for energy-efficient lighting systems. (2) Development of standards and codes for lighting systems, establishment of product specifications, and enforcement of product standards. (3) Development of quality certification and labelling system to provide assurances to consumers that the products they are purchasing will meet their performance and cost saving expectations. (4) Highlighted support and financing for production technology development and production capacity expansion. (5) Demonstration and pilot projects to boost consumer confidence in green lighting systems and to demonstrate new production technologies and processes. (6) International co-operation to expand the international exchange and absorb advanced technology and experience for implementation of the China Green Lights Program.

  3. Retrofitting Housing with Lightweight Green Roof Technology in Sydney, Australia, and Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Sara Wilkinson

    2015-01-01

    Full Text Available The built environment contributes around half of total greenhouse gas emissions and with 87% of residential buildings that we will have by 2050 already built, it is vital to adopt sustainable retrofitting practices. The question is: what are the viable solutions? One answer may be green roof retrofitting. The environmental benefits include reduced operational carbon emissions, reduced urban heat island effect, increased bio-diversity, housing temperature attenuation and reduced stormwater run-off. The economic benefits are the reduced maintenance costs and lower running costs. The social gain is the creation of spaces where people have access to green areas. However, the barriers to retrofitting include the perceptions of structural adequacy, the risk of water damage, high installation and maintenance costs, as well as access and security issues. Many Australian and Brazilian residential buildings have metal sheet roofs, a lightweight material with poor thermal performance. During the summer, temperatures in Sydney and Rio de Janeiro reach 45 degrees Celsius, and in both cities, rainfall patterns are changing, with more intense downpours. Furthermore, many residential buildings are leased, and currently, tenants are restricted by the modifications that they can perform to reduce running costs and carbon emissions. This research reports on an experiment on two small-scale metal roofs in Sydney and Rio de Janeiro to assess the thermal performance of portable small-scale modules. The findings are that considerable variation in temperature was found in both countries, indicating that green roof retrofitting could lower the cooling energy demand considerably.

  4. Mechanical and thermal property characterization of poly-L-lactide (PLLA) scaffold developed using pressure-controllable green foaming technology

    International Nuclear Information System (INIS)

    Sheng, Shen-Jun; Hu, Xiao; Wang, Fang; Ma, Qing-Yu; Gu, Min-Fen

    2015-01-01

    Poly-L-lactide (PLLA) is one of the most promising biological materials used for tissue engineering scaffolds (TES) because of their excellent biodegradability and tenability. Here, microcellular PLLA foams were fabricated by pressure-controllable green foaming technology. Scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), wide angle X-ray diffraction measurement (WAXRD), thermogravimetric (TG) analysis, reflection-Fourier transform infrared (FTIR) analysis, enzymatic degradation study and MTT assay were used to analyze the scaffolds' morphologies, structures and crystallinities, mechanical and biodegradation properties, as well as their cytotoxicity. The results showed that PLLA foams with pore sizes from 8 to 103 μm diameters were produced when the saturation pressure decreased from 7.0 to 4.0 MPa. Through a combination of StepScan DSC (SSDSC) and WAXRD approaches, it was observed in PLLA foams that the crystallinity, highly-oriented metastable state and rigid amorphous phase increased with the increasing foaming pressure. It was also found that both the glass transition temperature and apparent enthalpy of PLLA significantly increased after the foaming process, which suggested that the changes of microcellular structure could provide PLLA scaffolds better thermal stability and elasticity. Moreover, MTT assessments suggested that the smaller pore size should benefit cell attachment and growth in the scaffold. The results of current work will give us better understanding of the mechanisms involved in structure and property changes of PLLA at the molecular level, which enables more possibilities for the design of PLLA scaffold to satisfy various requirements in biomedical and green chemical applications. - Highlights: • Pressure-controllable green foaming technology is used. • The crystallinity and rigid amorphous fraction is calculated by using DSC and XRD. • We examine the changes of

  5. Mechanical and thermal property characterization of poly-L-lactide (PLLA) scaffold developed using pressure-controllable green foaming technology

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Shen-Jun [Center of Analysis and Testing, Nanjing Normal University, Nanjing 210023 (China); School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210023 (China); Hu, Xiao [Department of Physics and Astronomy, Rowan University, Glassboro, NJ 08028 (United States); Department of Biomedical and Translational Sciences, Rowan University, Glassboro, NJ 08028 (United States); Wang, Fang, E-mail: wangfang@njnu.edu.cn [Center of Analysis and Testing, Nanjing Normal University, Nanjing 210023 (China); Department of Physics and Astronomy, Rowan University, Glassboro, NJ 08028 (United States); Ma, Qing-Yu [Key Laboratory of Optoelectronics of Jiangsu Province, School of Physics and Technology, Nanjing Normal University, Nanjing 210023 (China); Gu, Min-Fen [Center of Analysis and Testing, Nanjing Normal University, Nanjing 210023 (China)

    2015-04-01

    Poly-L-lactide (PLLA) is one of the most promising biological materials used for tissue engineering scaffolds (TES) because of their excellent biodegradability and tenability. Here, microcellular PLLA foams were fabricated by pressure-controllable green foaming technology. Scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), wide angle X-ray diffraction measurement (WAXRD), thermogravimetric (TG) analysis, reflection-Fourier transform infrared (FTIR) analysis, enzymatic degradation study and MTT assay were used to analyze the scaffolds' morphologies, structures and crystallinities, mechanical and biodegradation properties, as well as their cytotoxicity. The results showed that PLLA foams with pore sizes from 8 to 103 μm diameters were produced when the saturation pressure decreased from 7.0 to 4.0 MPa. Through a combination of StepScan DSC (SSDSC) and WAXRD approaches, it was observed in PLLA foams that the crystallinity, highly-oriented metastable state and rigid amorphous phase increased with the increasing foaming pressure. It was also found that both the glass transition temperature and apparent enthalpy of PLLA significantly increased after the foaming process, which suggested that the changes of microcellular structure could provide PLLA scaffolds better thermal stability and elasticity. Moreover, MTT assessments suggested that the smaller pore size should benefit cell attachment and growth in the scaffold. The results of current work will give us better understanding of the mechanisms involved in structure and property changes of PLLA at the molecular level, which enables more possibilities for the design of PLLA scaffold to satisfy various requirements in biomedical and green chemical applications. - Highlights: • Pressure-controllable green foaming technology is used. • The crystallinity and rigid amorphous fraction is calculated by using DSC and XRD. • We examine the changes of

  6. Research cooperation project on environmentally friendly technology for highly efficient mineral resources extraction and treatment. Detail design for pilot plant (Mechanical fabrication)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper prepared plans of the mechanical equipment in the detailed design of a pilot plant in the joint research project on the environmental protection technology for highly efficient mineral resource extraction and treatment. (NEDO)

  7. Green innovations and organizational change: Making better use of environmental technology

    OpenAIRE

    Hottenrott, Hanna; Rexhäuser, Sascha; Veugelers, Reinhilde

    2012-01-01

    This study investigates productivity effects to firms introducing new environmental technologies. The literature on within-firm organisational change and productivity suggests that firms can get higher productivity effects from adopting new technologies if complementary organisational changes are adopted simultaneously. Such complementarity effects may be of critical importance for the case of adoption of greenhouse gas (GHG) abatement technologies. The adoption of these technologies is often...

  8. Qualitative dosimetric system for radiation processing. Technology for pilot scale preparation

    International Nuclear Information System (INIS)

    Moraru, R.

    1998-01-01

    Good manufacturing practice for radiation processing requires a very strictly tracking of the processed products. A method of labelling and identification of the irradiated and nonirradiated products is required. The qualitative dosimetric system provides a fast method for monitoring the product flow. Such dosimeters are attached on each product box, usually as labels, and offer a YES/NO information about the passing of products through the radiation field. Usually, this information consists in a change of colour. The qualitative dosimetric system that we realised is based on the degradation of polyvinylchloride (PVC) under radiation field. An amount of hydrochloric acid is released in this reaction. A pH indicator, included in the system, changes its colour at different absorbed dose. The changes of colour happened in a certain pH interval called turning range. We used as pH indicator the RED CONGO colorant with turning range of pH = 3 to 5 (from blue to red). A schematic view of the qualitative dosimeter is given. The initial colour is red and it continuously changes to brown, at 1 kGy absorbed dose, and to blue-green, for 5-100 kGy. The main features of this qualitative dosimetric system are: - Quick and easy to read information about product passing through radiation field; - Absorbed dose range, 1-300 kGy; - Independence of absorbed dose rate in the interval 5-100 kGy/h; - Stability, 3 year in the dark and 1 year in sun light; - Good reproducibility. The preparation technology consists in the following steps: 1. Preparation of the solutions: a) PVC in cyclohexanone solution b) RED CONGO in water solution; 2. Preparation of the system support consisting in dropping the PVC solution on adhesive labels; 3. Sample preparation consists in dropping the colorant solution on the system support; 4. Batch trial tests. The trial test was performed at IETI 10000 irradiation plant belonging to IFIN-HH and the reference absorbed dose was determined by Fricke dosimetry. The

  9. Performance Comparison of BPL, EtherLoop and SHDSL technology performance on existing pilot cable circuits under the presence of induced voltage

    International Nuclear Information System (INIS)

    Che, Y X; Ong, H S; Lai, L C; Ong, X J; Do, N Q; Karuppiah, S

    2013-01-01

    Pilot cable is originally used for utility protection. Then, pilot cable is further utilized for SCADA communication with low frequency PSK modem in the early 1990. However, the quality of pilot cable communication drops recently. Pilot cable starts to deteriorate due to aging and other unknown factors. It is also believed that the presence of induced voltage causes interference to existing modem communication which operates at low frequency channel. Therefore, BPL (Broadband Power Line), EtherLoop and SHDSL (Symmetrical High-speed Digital Subscriber Line) modem technology are proposed as alternative communication solutions for pilot cable communication. The performance of the 3 selected technologies on existing pilot cable circuits under the presence of induced voltage are measured and compared. Total of 11 pilot circuits with different length and level of induced voltage influence are selected for modem testing. The performance of BPL, EtherLoop and SHDSL modem technology are measured by the delay, bandwidth, packet loss and the long term usability SCADA (Supervisory Control and Data Acquisition) application. The testing results are presented and discussed in this paper. The results show that the 3 selected technologies are dependent on distance and independent on the level of induced voltage.

  10. Natural deep eutectic solvents as new potential media for green technology

    International Nuclear Information System (INIS)

    Dai, Yuntao; Spronsen, Jaap van; Witkamp, Geert-Jan; Verpoorte, Robert; Choi, Young Hae

    2013-01-01

    Highlights: ► Natural products were used as a source for deep eutectic solvents and ionic liquids. ► We define own chemical and physical properties of natural deep eutectic solvents. ► Interaction between natural deep eutectic solvents and solutes was confirmed by NMR. ► The developed natural deep eutectic solvents were applied as green media. - Abstract: Developing new green solvents is one of the key subjects in Green Chemistry. Ionic liquids (ILs) and deep eutectic solvents, thus, have been paid great attention to replace current harsh organic solvents and have been applied to many chemical processing such as extraction and synthesis. However, current ionic liquids and deep eutectic solvents have still limitations to be applied to a real chemical industry due to toxicity against human and environment and high cost of ILs and solid state of most deep eutectic solvents at room temperature. Recently we discovered that many plant abundant primary metabolites changed their state from solid to liquid when they were mixed in proper ratio. This finding made us hypothesize that natural deep eutectic solvents (NADES) play a role as alternative media to water in living organisms and tested a wide range of natural products, which resulted in discovery of over 100 NADES from nature. In order to prove deep eutectic feature the interaction between the molecules was investigated by nuclear magnetic resonance spectroscopy. All the tested NADES show clear hydrogen bonding between components. As next step physical properties of NADES such as water activity, density, viscosity, polarity and thermal properties were measured as well as the effect of water on the physical properties. In the last stage the novel NADES were applied to the solubilization of wide range of biomolecules such as non-water soluble bioactive natural products, gluten, starch, and DNA. In most cases the solubility of the biomolecules evaluated in this study was greatly higher than water. Based on the

  11. Natural deep eutectic solvents as new potential media for green technology

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Yuntao [Natural Products Laboratory, Institute of Biology, Leiden University, 2300 RA Leiden (Netherlands); Spronsen, Jaap van; Witkamp, Geert-Jan [Laboratory for Process Equipment, Delft University of Technology, Delft (Netherlands); Verpoorte, Robert [Natural Products Laboratory, Institute of Biology, Leiden University, 2300 RA Leiden (Netherlands); Choi, Young Hae, E-mail: y.choi@chem.leidenuniv.nl [Natural Products Laboratory, Institute of Biology, Leiden University, 2300 RA Leiden (Netherlands)

    2013-03-05

    Highlights: ► Natural products were used as a source for deep eutectic solvents and ionic liquids. ► We define own chemical and physical properties of natural deep eutectic solvents. ► Interaction between natural deep eutectic solvents and solutes was confirmed by NMR. ► The developed natural deep eutectic solvents were applied as green media. - Abstract: Developing new green solvents is one of the key subjects in Green Chemistry. Ionic liquids (ILs) and deep eutectic solvents, thus, have been paid great attention to replace current harsh organic solvents and have been applied to many chemical processing such as extraction and synthesis. However, current ionic liquids and deep eutectic solvents have still limitations to be applied to a real chemical industry due to toxicity against human and environment and high cost of ILs and solid state of most deep eutectic solvents at room temperature. Recently we discovered that many plant abundant primary metabolites changed their state from solid to liquid when they were mixed in proper ratio. This finding made us hypothesize that natural deep eutectic solvents (NADES) play a role as alternative media to water in living organisms and tested a wide range of natural products, which resulted in discovery of over 100 NADES from nature. In order to prove deep eutectic feature the interaction between the molecules was investigated by nuclear magnetic resonance spectroscopy. All the tested NADES show clear hydrogen bonding between components. As next step physical properties of NADES such as water activity, density, viscosity, polarity and thermal properties were measured as well as the effect of water on the physical properties. In the last stage the novel NADES were applied to the solubilization of wide range of biomolecules such as non-water soluble bioactive natural products, gluten, starch, and DNA. In most cases the solubility of the biomolecules evaluated in this study was greatly higher than water. Based on the

  12. DTS technology: evaluation in steam injection pilots in PETROBRAS; Tecnologias DTS: avaliacao em pilotos de injecao de vapor na PETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Triques, Adriana Lucia Cerri; Rodrigues, Renato Cunha; Souza, Carlos Francisco Sales de; Izetti, Ronaldo Goncalves [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    In oil and gas industry, downhole pressure and temperature distributed sensors can provide strategic information for production optimization throughout the field. Upon the successful implementation of a pilot for optical fiber distributed temperature monitoring of observer wells in a steam injection field, two new pilots have been implemented to also monitor injectors and producers in both cyclic and continuous injection fields strongly influenced by H2S. The pilots demonstrated that this technology is suitable to monitor producers in onshore fields under the conditions above without risks to the production. The sensors did not prove to be suitable for long term monitoring of injectors under continuous steam injection if fiber is installed inside the injection tubing. For cyclic injection applications, the development of steam injection packers is needed to guarantee casing integrity during the injection cycle. The application of the technology in offshore wells is nowadays restricted to dry completion situation. The potential applicability in submarine wells is tightly linked to the development of downhole and wellhead wet mate optical fiber connectors. (author)

  13. NIH Data Commons Pilot Phase | Informatics Technology for Cancer Research (ITCR)

    Science.gov (United States)

    The NIH, under the BD2K program, will be launching a Data Commons Pilot Phase to test ways to store, access and share Findable, Accessible, Interoperable and Reusable (FAIR) biomedical data and associated tools in the cloud. The NIH Data Commons Pilot Phase is expected to span fiscal years 2017-2020, with an estimated total budget of approximately $55.5 Million, pending available funds.

  14. EU-Korea Conference on Science and Technology Closer to Humanity-Greenness

    CERN Document Server

    Lee, Joung Hwan; Kim, Jung-Sik; EU- Korea Conference on Science and Technology

    2010-01-01

    Current research fields in science and technology were presented and discussed at the EKC2008, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology.

  15. Green Gold

    International Nuclear Information System (INIS)

    Salamandra Martinez, Carlos

    2004-01-01

    The main purpose of this work is to offer a general panoramic of the processes or experiences pilot that are carried out in the Project Green Gold, as strategy of environmental sustainability and organizational invigoration in Choco, especially in the 12 communities of the municipalities of Tado and Condoto. It is also sought to offer a minimum of information on the techniques of handmade production and to show the possibilities to carry out in a rational way the use and use of the natural resources. The Project Green Gold is carried out by the Corporation Green Gold (COV) and co-financed with resources of international and national character, the intervention of the financial resources it achievement mainly for the use of clean processes in the extraction stages and metals benefit. The project is centered primarily in the absence of use of products or toxic substances as the mercury, fair trade, organizational invigoration, execution of 11 approaches and certification of the metals Gold and Platinum. The COV, it has come executing the proposal from the year 2001 with the premise of contributing to the balance between the rational exploitation of the natural resources and the conservation of the environment in the Choco. In the project they are used technical handmade characteristic of the region framed inside the mining activity and production activities are diversified in the productive family units. Those producing with the support of entities of juridical character, specify the necessary game rules for the extraction and products commercialization

  16. Semi-polar GaN materials technology for high IQE green LEDs.

    Energy Technology Data Exchange (ETDEWEB)

    Koleske, Daniel; Lee, Stephen Roger; Crawford, Mary H; Coltrin, Michael Elliott; Fini, Paul

    2013-06-01

    The goal of this NETL funded program was to improve the IQE in green (and longer wavelength) nitride- based LEDs structures by using semi-polar GaN planar orientations for InGaN multiple quantum well (MQW) growth. These semi-polar orientations have the advantage of significantly reducing the piezoelectric fields that distort the QW band structure and decrease electron-hole overlap. In addition, semipolar surfaces potentially provide a more open surface bonding environment for indium incorporation, thus enabling higher indium concentrations in the InGaN MQW. The goal of the proposed work was to select the optimal semi-polar orientation and explore wafer miscuts around this orientation that produced the highest quantum efficiency LEDs. At the end of this program we had hoped to have MQWs active regions at 540 nm with an IQE of 50% and an EQE of 40%, which would be approximately twice the estimated current state-of-the-art.

  17. Environmental Aspects Of The Green Surface Plastic Deformation Technology Of Car Parts

    Science.gov (United States)

    Grigoriev, S. N.; Bobrovskij, N. M.; Bobrovskij, I. N.; Melnikov, P. A.; Lukyanov, A. A.

    2017-01-01

    Foreign and domestic experience in development of dry processing technologies are considered. The results of the introduction of dry processing technologies (cutting, boring, milling, drilling) on the industrial companies in Germany are given. The negative impact on the environment and human health is shown. The possible ways of leakage of lubricoolant components in the atmosphere and soil are considered. Lubricoolants are considered as a required permanent component. Three main tasks for lubricoolant: cooling, lubricating and chip disposal are discribed.

  18. To Green or Not to Green? Evaluation of Green Stormwater Infrastructure in Kansas City Middle Blue River Project

    Science.gov (United States)

    The City of Kansas City, Mo., Water Services Department is implementing a pilot project to measure and evaluate the performance of green infrastructure. Information obtained through this pilot project will be used to guide the design of green solutions throughout Kansas City und...

  19. Fiscal 1997 report of the development of high efficiency waste power generation technology. No.2 volume. Pilot plant verification test; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (pilot plant jissho shiken). 1997 nendo hokokusho (daini bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to a high efficiency waste power generation system using general waste as fuel, the details of the following were described: design/construction management and operational study of pilot plant, design/manufacture/construction of pilot plant, and study of an optimal total system. Concerning the construction management and operational study, the paper described the application for governmental/official inspection procedures and taking inspection, process management of pilot plant, site patrol, safety management, management of trial run of pilot plant, drawing-up of a verification test plan and test run, etc. Relating to the design/manufacture/construction of pilot plant, an outline of the pilot plant was described. The paper also stated points to be considered in design of furnace structure and boiler structure, points to be considered of the verification test, etc. As to the study of an optimal total system, the following were described: survey of waste gasification/slagging power generation technology, basic study on RDF production process, survey of trends of waste power generation technology in the U.S., etc. 52 refs., 149 figs., 121 tabs.

  20. Parent Perception of Two Eye-Gaze Control Technology Systems in Young Children with Cerebral Palsy: Pilot Study.

    Science.gov (United States)

    Karlsson, Petra; Wallen, Margaret

    2017-01-01

    Eye-gaze control technology enables people with significant physical disability to access computers for communication, play, learning and environmental control. This pilot study used a multiple case study design with repeated baseline assessment and parents' evaluations to compare two eye-gaze control technology systems to identify any differences in factors such as ease of use and impact of the systems for their young children. Five children, aged 3 to 5 years, with dyskinetic cerebral palsy, and their families participated. Overall, families were satisfied with both the Tobii PCEye Go and myGaze® eye tracker, found them easy to position and use, and children learned to operate them quickly. This technology provides young children with important opportunities for learning, play, leisure, and developing communication.

  1. A Pilot Study Investigating the Effects of Advanced Nuclear Power Plant Control Room Technologies: Methods and Qualitative Results

    Energy Technology Data Exchange (ETDEWEB)

    BLanc, Katya Le [Idaho National Lab. (INL), Idaho Falls, ID (United States); Powers, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spielman, Zachary [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Brandon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fitzgerald, Kirk [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    Control room modernization is an important part of life extension for the existing light water reactor fleet. None of the 99 currently operating commercial nuclear power plants in the U.S. has completed a full-scale control room modernization to date. Nuclear power plant main control rooms for the existing commercial reactor fleet remain significantly analog, with only limited digital modernizations. Upgrades in the U.S. do not achieve the full potential of newer technologies that might otherwise enhance plant and operator performance. The goal of the control room upgrade benefits research is to identify previously overlooked benefits of modernization, identify candidate technologies that may facilitate such benefits, and demonstrate these technologies through human factors research. This report describes a pilot study to test upgrades to the Human Systems Simulation Laboratory at INL.

  2. "Green technology": Bio-stimulation by an electric field for textile reactive dye contaminated agricultural soil.

    Science.gov (United States)

    Annamalai, Sivasankar; Santhanam, Manikandan; Selvaraj, Subbulakshmi; Sundaram, Maruthamuthu; Pandian, Kannan; Pazos, Marta

    2018-05-15

    The aim of the study is to degrade pollutants as well as to increase the fertility of agricultural soil by starch enhancing electrokinetic (EKA) and electro-bio-stimulation (EBS) processes. Starch solution was used as an anolyte and voltage gradient was about 0.5V/cm. The influence of bacterial mediated process was evaluated in real contaminated farming soil followed by pilot scale experiment. The in-situ formation of β-cyclodextrin from starch in the treatments had also influence on the significant removal of the pollutants from the farming soil. The conductivity of the soil was effectively reduced from 15.5dS/m to 1.5dS/m which corroborates well with the agricultural norms. The bio-stimulation was confirmed by the increase of the phosphorus content in the treated soil. Finally, phytotoxicity assays demonstrated the viability of the developed technique for soil remediation because plant germination percentage was higher in the treated soil in comparison to untreated soil. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Metaphysical green

    DEFF Research Database (Denmark)

    Earon, Ofri

    2011-01-01

    to adapt to urban environment. It explores the potential of Sensation of Green in the city. The paper questions whether the Sensation of Green could introduce a new spectrum of greens, beside the real green. It develops the term of metaphysical green – does green have to be green or can it be only...

  4. Horizontal directional drilling: a green and sustainable technology for site remediation.

    Science.gov (United States)

    Lubrecht, Michael D

    2012-03-06

    Sustainability has become an important factor in the selection of remedies to clean up contaminated sites. Horizontal directional drilling (HDD) is a relatively new drilling technology that has been successfully adapted to site remediation. In addition to the benefits that HDD provides for the logistics of site cleanup, it also delivers sustainability advantages, compared to alternative construction methods.

  5. International convention on clean, green and sustainable technologies in iron and steel making

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    The presentations (overheads/viewgraphs) discussed energy efficiency and conservation in iron and steel making, air pollution control, carbon trading, reclamation of iron ore mines, utilisation of low grade coal and iron ore, Corex and Finex processes, HIsmelt, sinter technology, energy recovery, reduction gas from coal, coal gasification and syngas based DRI, and resettlement of people.

  6. Information and communication technologies and gender in climate change and green economy: Situating women’s opportunities and challenges in Zambian policies and strategies

    Directory of Open Access Journals (Sweden)

    Justina Namukombo

    2016-04-01

    Full Text Available Zambia’s 2012 report on the United Nations Conference on Sustainable Development (RIO +20 identifies existing opportunities on the country’s transitioning to green economy. The RIO +20 conference of 2012 has resulted in new momentum in addressing problems of sustainable development. However, this article argues that there are practical challenges that require paying attention to, especially those involving women. The article addressed one key question: To what extent can women participate in the transitioning process to green economy in Zambia and what opportunities and challenges exists? The study used document analysis to answer the above question. National policy documents were reviewed to understand interventions on environmental management. Whilst going through the documents, the study used gender analysis frameworks (education, skills, roles in family and society, access to infrastructure to bring out qualitative and quantitative information on women. Using suggested green economy interventions in the literature as benchmark, qualitative analysis was used to project possible participation of women in green economy activities and possible challenges to be faced. The study found that participation of women will be limited despite existing opportunities because of challenges of access to information and communication technology infrastructures, low educational levels and skills and financial constraints. As Zambia undergoes a transitioning process, these limitations should be addressed in planned green economy policies and interventions to maximise benefits. Keywords: Green economy; Gender; Policies; Strategies; ICT; Zambia

  7. Large-area printed supercapacitor technology for low-cost domestic green energy storage

    International Nuclear Information System (INIS)

    Tehrani, Z.; Thomas, D.J.; Korochkina, T.; Phillips, C.O.; Lupo, D.; Lehtimäki, S.; O'Mahony, J.; Gethin, D.T.

    2017-01-01

    In this research we demonstrate that a flexible ultra-thin supercapacitor can be fabricated using high volume screen printing process. This has enabled the sequential deposition of current collector, electrode, electrolyte materials and adhesive onto a Polyethylene terephthalate (PET) substrate in order to form flexible electrodes for reliable energy storage applications. The electrodes were based on an activated carbon ink and gel electrolyte each of which were formulated for this application. Supercapacitors that have surface areas from 100 to 1600 mm"2 and an assembled device thickness of 375 μm were demonstrated. The capacitance ranged from 50 to 400 mF. Capacitance of printed carbon electrodes is rarely reported in literature and no references were found. The chemistry developed during this study displayed long-term cycling potential and demonstrated the stability of the capacitor for continued usage. The gel electrolyte developed within this work showed comparable performance to that of a liquid counterpart. This improvement resulted in the reduction in gel resistance from 90Ω to 0.5Ω. Significant reduction was observed for all resistances. The solid-state supercapacitors with the gel electrolyte showed comparable performance to the supercapacitors that used a liquid electrolyte. This large area printed device can be used in future houses for reliable green energy storage. - Highlights: • It has been demonstrated that a flexible supercapacitors with large area storage has been developed. • The simplified architecture has the potential to lead to a new class of printable, thin storage devices. • The specific capacitance of 21 F/g was measured.

  8. Large-scale nanofabrication of periodic nanostructures using nanosphere-related techniques for green technology applications (Conference Presentation)

    Science.gov (United States)

    Yen, Chen-Chung; Wu, Jyun-De; Chien, Yi-Hsin; Wang, Chang-Han; Liu, Chi-Ching; Ku, Chen-Ta; Chen, Yen-Jon; Chou, Meng-Cheng; Chang, Yun-Chorng

    2016-09-01

    Nanotechnology has been developed for decades and many interesting optical properties have been demonstrated. However, the major hurdle for the further development of nanotechnology depends on finding economic ways to fabricate such nanostructures in large-scale. Here, we demonstrate how to achieve low-cost fabrication using nanosphere-related techniques, such as Nanosphere Lithography (NSL) and Nanospherical-Lens Lithography (NLL). NSL is a low-cost nano-fabrication technique that has the ability to fabricate nano-triangle arrays that cover a very large area. NLL is a very similar technique that uses polystyrene nanospheres to focus the incoming ultraviolet light and exposure the underlying photoresist (PR) layer. PR hole arrays form after developing. Metal nanodisk arrays can be fabricated following metal evaporation and lifting-off processes. Nanodisk or nano-ellipse arrays with various sizes and aspect ratios are routinely fabricated in our research group. We also demonstrate we can fabricate more complicated nanostructures, such as nanodisk oligomers, by combining several other key technologies such as angled exposure and deposition, we can modify these methods to obtain various metallic nanostructures. The metallic structures are of high fidelity and in large scale. The metallic nanostructures can be transformed into semiconductor nanostructures and be used in several green technology applications.

  9. Green, Eco, Innovative Design, and Manufacturing Technology of a 1-Ton per Batch Municipal Solid Waste Incinerator

    Directory of Open Access Journals (Sweden)

    Kerdsuwan Somrat

    2016-01-01

    Full Text Available The thermal treatment of waste by incineration is considered an ultimate solution in order to get rid of waste properly by using the combustible properties of waste and transforming them into inert form and gaseous emission, with the main advantage of a huge reduction in mass and volume of treated waste, destruction of the dangerous components in waste, and obtaining green and clean energy from the exothermal reaction from the completed combustion process. In order to achieve the main goal of incineration, a good design, construction, supervision, and intensive operation and maintenance must be taken into account, especially for the small-scale incinerator. This research will deal with the green, innovative, and eco design and manufacturing technology of a 1-ton per batch municipal solid waste (MSW incinerator. The concept design of the incinerator will focus on the design of the feeding process where only one batch of waste will be discharged into the combustion chamber at one time instead of the semi-feed process, as found in the conventional incinerator. This will ease the operation of the operator and reduce the operating cost. Moreover, the innovative design includes the redesign of combustion air injection into either the primary or secondary combustion chamber in order to achieve the 3Ts of combustion (time, temperature. and turbulence. This design can eliminate the use of an auxiliary burner in the primary combustion chamber. Rethinking the innovative design of using recirculation hot flue gas for preheating of wet garbage in order to pre-dry the waste before combustion is also taken into account. The manufacturing process of the wall composition as well as other parts of the incinerator are also examined.

  10. The Investments in Renewable Energy Sources: Do Low Carbon Economies Better Invest in Green Technologies?

    Directory of Open Access Journals (Sweden)

    Antonio Angelo Romano

    2011-01-01

    Full Text Available The aim of this study is to analyse the driving of investment in renewable energy sources in low carbon and high carbon economies. To address these issues, a dynamic panel analysis of the renewable investment in a sample of 29 countries was proposed. Results demonstrate that the dynamic of investments in renewable sources is similar in the two panels, and depends by nuclear power generation, GDP and technological efficiency. Results show that countries try to reduce their environmental footprint, decreasing the CO2 intensity. Based on the estimation results, we think that energy sustainability passes through the use of renewable resources that can complement the nuclear technology on condition that both exceed their limits.

  11. Technologies for production of biodiesel focusing on green catalytic techniques: A review

    International Nuclear Information System (INIS)

    Helwani, Z.; Othman, M.R.; Aziz, N.; Fernando, W.J.N.; Kim, J.

    2009-01-01

    Biodiesel production is undergoing rapid technological reforms in industries and academia. This has become more obvious and relevant since the recent increase in the petroleum prices and the growing awareness relating to the environmental consequences of the fuel overdependency. In this paper, various technological methods to produce biodiesel being used in industries and academia are reviewed. Catalytic transesterification, the most common method in the production of biofuel, is emphasized in the review. The two most common types of catalysts; homogeneous liquids and heterogeneous solids, are discussed at length in the paper. Two types of processes; batch and continuous processes, are also presented. Although batch production of biodiesel is favored over continuous process in many laboratory and larger scale efforts, the latter is expected to gain wider acceptance in the near future, considering its added advantages associated with higher production capacity and lower operating costs to ensure long term supply of biodiesel. (author)

  12. When should green technology support policies supplement the carbon price? The case of the electricity sector

    International Nuclear Information System (INIS)

    Lecuyer, Oskar

    2013-01-01

    This thesis contributes to the literature on optimal policy choice. It studies the use of policy combinations to mitigate greenhouse gases emissions from electricity production. One finding applies to cases where uncertainty is such that the risk of a nil carbon price cannot be excluded. A cap on emissions alone may then not trigger enough abatements, justifying the addition of e.g. a renewable subsidy. When considering a transition toward a carbon free electricity sector, capital accumulation causes complex dynamic effects to happen. We find that decisions taken by comparing the leveled costs of abatement technologies, even including carbon costs, would favor intermediate technologies (e.g. gas plants) to the detriment of more-expensive but lower-carbon technologies (renewable power), leading to a suboptimal investment schedule. This thesis also studies the effects of marginal policy changes in a mix comprising the main French instruments. We find that surprisingly, adding a tariff for renewables financed by a tax on electricity consumption to a cap on emissions and a subsidy for energy efficiency will reduce the consumer electricity price when the non-renewable production is fixed and does not depend on the carbon price. The assessment of the French climate policies in the electricity sector shows that overlapping policies for mitigation may be justified by multiple carbon price failures, even if the ideal long-term policy mix depends on the carbon price trajectory. (author)

  13. Green(ing) infrastructure

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2014-03-01

    Full Text Available the generation of electricity from renewable sources such as wind, water and solar. Grey infrastructure – In the context of storm water management, grey infrastructure can be thought of as the hard, engineered systems to capture and convey runoff..., pumps, and treatment plants.  Green infrastructure reduces energy demand by reducing the need to collect and transport storm water to a suitable discharge location. In addition, green infrastructure such as green roofs, street trees and increased...

  14. Green Component Procurement Collaboration for Improving Supply Chain Management in the High Technology Industries: A Case Study from the Systems Perspective

    Directory of Open Access Journals (Sweden)

    Min-Ren Yan

    2016-01-01

    Full Text Available The impacts of high technology industries have been growing increasingly to technological innovations and global economic developments, while the concerns in sustainability are calling for facilitating green materials and cleaner production in the industrial value chains. Today’s manufacturing companies are not striving for individual capacities but for the effective working with green supply chains. However, in addition to environmental and social objectives, cost and economic feasibility has become one of the most critical success factors for improving supply chain management with green component procurement collaboration, especially for the electronics OEM (original equipment manufacturing companies whose procurement costs often make up a very high proportion of final product prices. This paper presents a case study from the systems perspective by using System Dynamics simulation analysis and statistical validations with empirical data. Empirical data were collected from Taiwanese manufacturing chains—among the world’s largest manufacturing clusters of high technology components and products—and their global green suppliers to examine the benefits of green component procurement collaborations in terms of shared costs and improved shipping time performance. Two different supply chain collaboration models, from multi-layer ceramic capacitor (MLCC and universal serial bus 3.0 (USB 3.0 cable procurements, were benchmarked and statistically validated. The results suggest that the practices of collaborative planning for procurement quantity and accurate fulfillment by suppliers are significantly related to cost effectiveness and shipping time efficiency. Although the price negotiation of upstream raw materials for the collaborative suppliers has no statistically significant benefit to the shipping time efficiency, the shared cost reduction of component procurement is significantly positive for supply chain collaboration among green

  15. Final report from VFL technologies for the pilot-scale thermal treatment of Lower East Fork Poplar Creek floodplain soils

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Lower East Fork Poplar Creek (LEFPC) extends fourteen (14) miles through Oak Ridge, TN. The Creek sediments and surrounding floodplain soils are contaminated with mercury compounds. This project involved a comprehensive pilot demonstration on thermal desorption of these soils to validate the feasibility of the remedial technology which had been identified in previous studies. Thermal desorption is a technology that utilizes heating or drying of soils to induce volatilization of contaminants. These contaminants are then vaporized and either incinerated or condensed in the second stage of desorption. Mercury (Hg), which was the principal contaminate of concern, was collected by condensers in a vapor collection system. This type of system insured that the toxic mercury vapors did not escape to the atmosphere.

  16. Final report from VFL technologies for the pilot-scale thermal treatment of Lower East Fork Poplar Creek floodplain soils

    International Nuclear Information System (INIS)

    1994-09-01

    The Lower East Fork Poplar Creek (LEFPC) extends fourteen (14) miles through Oak Ridge, TN. The Creek sediments and surrounding floodplain soils are contaminated with mercury compounds. This project involved a comprehensive pilot demonstration on thermal desorption of these soils to validate the feasibility of the remedial technology which had been identified in previous studies. Thermal desorption is a technology that utilizes heating or drying of soils to induce volatilization of contaminants. These contaminants are then vaporized and either incinerated or condensed in the second stage of desorption. Mercury (Hg), which was the principal contaminate of concern, was collected by condensers in a vapor collection system. This type of system insured that the toxic mercury vapors did not escape to the atmosphere

  17. Ensuring green growth in a time of economic crisis: the role of energy technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Despite the severity of the current financial and economic crisis, it cannot be allowed to distract us from addressing critical and strategic climate change and energy challenges. The energy sector produces 60% of global greenhouse gas emissions and so it must also be a key part of any strategy to reduce them. This paper describes the most promising low-carbon technologies, their current status and the policy framework that will be necessary to achieve their widespread deployment. It also highlights what immediate steps can be taken as part of a Clean Energy New Deal. 4 figs., 2 tabs., 1 app.

  18. Development and Validation of Information Technology Mentor Teacher Attitude Scale: A Pilot Study

    Science.gov (United States)

    Saltan, Fatih

    2015-01-01

    The aim of this study development and validation of a teacher attitude scale toward Information Technology Mentor Teachers (ITMT). ITMTs give technological support to other teachers for integration of technology in their lessons. In the literature, many instruments have been developed to measure teachers' attitudes towards the technological tools…

  19. Green biodiesel production: a review on feedstock, catalyst, monolithic reactor, and supercritical fluid technology

    Directory of Open Access Journals (Sweden)

    Rizo Edwin Gumba

    2016-09-01

    Full Text Available The advancement of alternative energy is primarily catalyzed by the negative environmental impacts and energy depletion caused by the excessive usage of fossil fuels. Biodiesel has emerged as a promising substitute to petrodiesel because it is biodegradable, less toxic, and reduces greenhouse gas emission. Apart from that, biodiesel can be used as blending component or direct replacements for diesel fuel in automotive engines. A diverse range of methods have been reported for the conversion of renewable feedstocks (vegetable oil or animal fat into biodiesel with transesterification being the most preferred method. Nevertheless, the cost of producing biodiesel is higher compared to fossil fuel, thus impeding its commercialization potentials. The limited source of reliable feedstock and the underdeveloped biodiesel production route have prevented the full-scale commercialization of biodiesel in many parts of the world. In a recent development, a new technology that incorporates monoliths as support matrices for enzyme immobilization in supercritical carbon dioxide (SC-CO2 for continuous biodiesel production has been proposed to solve the problem. The potential of SC-CO2 system to be applied in enzymatic reactors is not well documented and hence the purpose of this review is to highlight the previous studies conducted as well as the future direction of this technology.

  20. Media business transformation based on information technology : A pilot study of three Swedish newspapers

    OpenAIRE

    Sadat Alavioon, Samin

    2017-01-01

    The newspaper industry has been transformed after the emergence of information technology. According to the transformation of media businesses by technology advancement this study realizes the importance of opportunities and threats brought by new information technology in the newspaper industry. Therefore, to develop an understanding of how the newspaper industry can transform due to technology advancement three research questions were answered; RQ 1. How can information technologies transfo...

  1. Green” Technology and Ecologically Unequal Exchange: The Environmental and Social Consequences of Ecological Modernization in the World-System

    Directory of Open Access Journals (Sweden)

    Eric Bonds

    2015-08-01

    Full Text Available This paper contributes to understandings of ecologically unequal exchange within the world-systems perspective by offering a series of case studies of ecological modernization in the automobile industry. The case studies demonstrate that “green” technologies developed and instituted in core nations often require specific raw materials that are extracted from the periphery and semi-periphery. Extraction of such natural resources causes significant environmental degradation and often displaces entire communities from their land. Moreover, because states often use violence and repression to facilitate raw material extraction, the widespread commercialization of “green” technologies can result in serious human rights violations. These findings challenge ecological modernization theory, which rests on the assumption that the development and commercialization of more ecologically-efficient technologies is universally beneficial.

  2. Technological Potential of Lactobacillus Strains Isolated from Fermented Green Olives: In Vitro Studies with Emphasis on Oleuropein-Degrading Capability

    Directory of Open Access Journals (Sweden)

    Massimo Iorizzo

    2016-01-01

    Full Text Available Technological properties of two strains of Lactobacillus plantarum (B3 and B11 and one of Lactobacillus pentosus (B4, previously isolated from natural fermented green olives, have been studied in vitro. Acidifying ability, salt, temperature, and pH tolerances of all strains were found in the range reported for similar strains produced in Italy and optimal growth conditions were found to be 6.0–8.0 pH, 15–30°C temperature, and less than 6% NaCl. Moreover, all strains showed very good tolerance to common olive phenol content (0.3% total phenol and high oleuropein-degrading capability. It was found that medium composition affected the bacterial oleuropein degradation. B11 strain grown in a nutrient-rich medium showed a lower oleuropein-degrading action than when it was cultivated in nutrient-poor medium. Furthermore, enzymatic activity assays revealed that oleuropein depletion did not correspond to an increase of hydroxytyrosol, evidencing that bacterial strains could efficiently degrade oleuropein via a mechanism different from hydrolysis.

  3. Biodiesel Production from Kapok (Ceiba pentandra Seed Oil using Naturally Alkaline Catalyst as an Effort of Green Energy and Technology

    Directory of Open Access Journals (Sweden)

    N.A. Handayani

    2013-10-01

    Full Text Available Nowadays, energy that used to serve all the needs of community, mainly generated from fossil (conventional energy. Terrace in energy consumption is not balanced with adequate fossil fuel reserves and will be totally depleted in the near future. Indonesian Government through a Presidential Decree No. 5 year 2006 mandates an increased capacity in renewable energy production from 5 percent to 15 percent in 2025. C. pentandra seed oil has feasibility as a sustainable biodiesel feedstock in Indonesia. The aim of this paper was to investigate biodiesel production from ceiba petandra seed oil using naturally potassium hydroxide catalyst. Research designs are based on factorial design with 2 levels and 3 independent variables (temperature, reaction time and molar ratio of methanol to oil. According to data calculation, the most influential single variable is molar ratio of methanol to oil. Characterization of biodiesel products meet all the qualifications standardized by SNI 04-7182-2006. Keywords: biodiesel, kapok seed oil, c. pentandra, green technology

  4. Technology Application of Environmental Friendly Refrigeration (Green Refrigeration) on Cold Storage for Fishery Industry

    Science.gov (United States)

    Rasta, IM; Susila, IDM; Subagia, IWA

    2018-01-01

    The application of refrigeration technology to postharvest fishery products is an very important. Moreover, Indonesia is a tropical region with relatively high temperatures. Fish storage age can be prolonged with a decrease in temperature. Frozen fish can even be stored for several months. Fish freezing means preparing fish for storage in low-temperature cold storage. The working fluid used in cold storage to cool low-temperature chambers and throw heat into high-temperature environments is refrigerant. So far refrigerant used in cold storage is Hydrochloroflourocarbons (HCFC) that is R-22. Chlor is a gas that causes ODP (Ozone Depleting Potential), while Flour is a gas that causes GWP (Global Warming Potential). Government policy began in 2015 to implement Hydrochloroflourocarbons Phase-Out Management Plan. Hydrocarbon (HC) is an alternative substitute for R-22. HC-22 (propane ≥ 99.5%) has several advantages, among others: environmentally friendly, indicated by a zero ODP value, and GWP = 3 (negligible), thermophysical property and good heat transfer characteristics, vapor phase density Which is low, and good solubility with mineral lubricants. The use of HC-22 in cold storage is less than R-22. From the analysis results obtained, cold storage system using HC-22 has better performance and energy consumption is more efficient than the R-22.

  5. The Applications of NASA Mission Technologies to the Greening of Human Impact

    Science.gov (United States)

    Sims, Michael H.

    2009-01-01

    I will give an overview talk about flight software systems, robotics technologies and modeling for energy minimization as applied to vehicles and buildings infrastructures. A dominant issue in both design and operations of robotic spacecraft is the minimization of energy use. In the design and building of spacecraft increased power is acquired only at the cost of additional mass and volumes and ultimately cost. Consequently, interplanetary spacecrafts are designed to have the minimum essential power and those designs often incorporate careful timing of all power use. Operationally, the availability of power is the most influential constraint for the use of planetary surface robots, such as the Mars Exploration Rovers. The amount of driving done, the amount of science accomplished and indeed the survivability of the spacecraft itself is determined by the power available for use. For the Mars Exploration Rovers there are four tools which are used: (1) models of the rover and it s thermal and power use (2) predictive environmental models of power input and thermal environment (3) fine grained manipulation of power use (4) optimization modeling and planning tools. In this talk I will discuss possible applications of this methodology to minimizing power use on Earth, especially in buildings.

  6. Green Computing

    Directory of Open Access Journals (Sweden)

    K. Shalini

    2013-01-01

    Full Text Available Green computing is all about using computers in a smarter and eco-friendly way. It is the environmentally responsible use of computers and related resources which includes the implementation of energy-efficient central processing units, servers and peripherals as well as reduced resource consumption and proper disposal of electronic waste .Computers certainly make up a large part of many people lives and traditionally are extremely damaging to the environment. Manufacturers of computer and its parts have been espousing the green cause to help protect environment from computers and electronic waste in any way.Research continues into key areas such as making the use of computers as energy-efficient as Possible, and designing algorithms and systems for efficiency-related computer technologies.

  7. Summer Students in Virtual Reality: A Pilot Study on Educational Applications of Virtual Reality Technology.

    Science.gov (United States)

    Bricken, Meredith; Byrne, Chris M.

    The goal of this study was to take a first step in evaluating the potential of virtual reality (VR) as a learning environment. The context of the study was The Technology Academy, a technology-oriented summer day camp for students ages 5-18, where student activities center around hands-on exploration of new technology (e.g., robotics, MIDI digital…

  8. Review and environmental impact assessment of green technologies for base courses in bituminous pavements

    International Nuclear Information System (INIS)

    Anthonissen, Joke; Van den bergh, Wim; Braet, Johan

    2016-01-01

    This paper provides a critical review of different approaches applied in the Belgian asphalt sector in order to reduce the environmental impact of bituminous road construction works. The focus is on (1) reusing reclaimed asphalt pavement, (2) reducing the asphalt production temperature, and (3) prolonging the service life of the pavement. Environmental impact assessment of these methods is necessary to be able to compare these approaches and understand better the ability to reduce the environmental impact during the life cycle of the road pavement. Attention should be drawn to the possible shift in environmental impact between various life cycle stages, e.g., raw material production, asphalt production, or waste treatment. Life cycle assessment is necessary to adequately assess the environmental impact of these approaches over the entire service life of the bituminous pavement. The three approaches and their implementation in the road sector in Flanders (region in Belgium) are described and the main findings from life cycle assessment studies on these subjects are discussed. It was found from the review that using reclaimed asphalt pavement in new bituminous mixtures might yield significant environmental gains. The environmental impact of the application of warm mix asphalt technologies, on the other hand, depends on the technique used. - Highlights: • Recycling, lower production temperature and durability of asphalt are investigated. • The use of RAP in new asphalt mixtures yields significant environmental advantages. • It would be beneficial to allow RAP in asphalt mixtures for wearing courses. • The use of particular additives might counteract the environmental gain from WMA. • The service life and the environmental data source influence the LCA results.

  9. Review and environmental impact assessment of green technologies for base courses in bituminous pavements

    Energy Technology Data Exchange (ETDEWEB)

    Anthonissen, Joke, E-mail: joke.anthonissen@uantwerpen.be [Faculty of Applied Engineering, University of Antwerp, Rodestraat 4, 2000 Antwerp (Belgium); Van den bergh, Wim, E-mail: wim.vandenbergh@uantwerpen.be [Faculty of Applied Engineering, University of Antwerp, Rodestraat 4, 2000 Antwerp (Belgium); Braet, Johan, E-mail: johan.braet@uantwerpen.be [Department Engineering Management, Faculty of Applied Economics, University of Antwerp, Prinsstraat 13, 2000 Antwerp (Belgium)

    2016-09-15

    This paper provides a critical review of different approaches applied in the Belgian asphalt sector in order to reduce the environmental impact of bituminous road construction works. The focus is on (1) reusing reclaimed asphalt pavement, (2) reducing the asphalt production temperature, and (3) prolonging the service life of the pavement. Environmental impact assessment of these methods is necessary to be able to compare these approaches and understand better the ability to reduce the environmental impact during the life cycle of the road pavement. Attention should be drawn to the possible shift in environmental impact between various life cycle stages, e.g., raw material production, asphalt production, or waste treatment. Life cycle assessment is necessary to adequately assess the environmental impact of these approaches over the entire service life of the bituminous pavement. The three approaches and their implementation in the road sector in Flanders (region in Belgium) are described and the main findings from life cycle assessment studies on these subjects are discussed. It was found from the review that using reclaimed asphalt pavement in new bituminous mixtures might yield significant environmental gains. The environmental impact of the application of warm mix asphalt technologies, on the other hand, depends on the technique used. - Highlights: • Recycling, lower production temperature and durability of asphalt are investigated. • The use of RAP in new asphalt mixtures yields significant environmental advantages. • It would be beneficial to allow RAP in asphalt mixtures for wearing courses. • The use of particular additives might counteract the environmental gain from WMA. • The service life and the environmental data source influence the LCA results.

  10. Radioactive Waste Treatment and Conditioning Using Plasma Technology Pilot Plant: Testing and Commissioning

    International Nuclear Information System (INIS)

    Rafizi Salihuddin; Rohyiza Baan; Norasalwa Zakaria

    2016-01-01

    Plasma pilot plant was commissioned for research and development program on radioactive waste treatment. The plant is equipped with a 50 kW direct current of non-transferred arc plasma torch which mounted vertically on top of the combustion chamber. The plant also consists of a dual function chamber, a water cooling system, a compress air supply system and a control system. This paper devoted the outcome after testing and commissioning of the plant. The problems arise was discussed in order to find the possible suggestion to overcome the issues. (author)

  11. Aquila Remotely Piloted Vehicle System Technology Demonstration (RPV-STD) Program. Volume 3. Field Test Program

    Science.gov (United States)

    1979-04-01

    FLIGHT TESTS Tis 8ootion sumarizes ech of the Crows Landln Flight Tests, hrm I to It Deoemiber 1975. 23 2.4.1 Flight 1 Aquila RPV 001 took off at 09.42...RC pilot In the stablied RC mode. To facilitate theme attempts, an automobile , with Its headlights on high beam, was positioned on each side of the...the vans. At approxi- mately 2 to 3 km, the actual automobile headlights would become visible. Then, the operator would attempt to reposition the RPV

  12. Description and pilot results from a novel method for evaluating return of incidental findings from next-generation sequencing technologies.

    Science.gov (United States)

    Goddard, Katrina A B; Whitlock, Evelyn P; Berg, Jonathan S; Williams, Marc S; Webber, Elizabeth M; Webster, Jennifer A; Lin, Jennifer S; Schrader, Kasmintan A; Campos-Outcalt, Doug; Offit, Kenneth; Feigelson, Heather Spencer; Hollombe, Celine

    2013-09-01

    The aim of this study was to develop, operationalize, and pilot test a transparent, reproducible, and evidence-informed method to determine when to report incidental findings from next-generation sequencing technologies. Using evidence-based principles, we proposed a three-stage process. Stage I "rules out" incidental findings below a minimal threshold of evidence and is evaluated using inter-rater agreement and comparison with an expert-based approach. Stage II documents criteria for clinical actionability using a standardized approach to allow experts to consistently consider and recommend whether results should be routinely reported (stage III). We used expert opinion to determine the face validity of stages II and III using three case studies. We evaluated the time and effort for stages I and II. For stage I, we assessed 99 conditions and found high inter-rater agreement (89%), and strong agreement with a separate expert-based method. Case studies for familial adenomatous polyposis, hereditary hemochromatosis, and α1-antitrypsin deficiency were all recommended for routine reporting as incidental findings. The method requires definition of clinically actionable incidental findings and provide documentation and pilot testing of a feasible method that is scalable to the whole genome.

  13. LAW ENFORCEMENT TECHNOLOGY ROADMAP: LESSONS TO DATE FROM THE NORTHWEST TECHNOLOGY DESK AND THE NORTHWEST FADE PILOTS

    Energy Technology Data Exchange (ETDEWEB)

    West, Curtis L.; Kreyling, Sean J.

    2011-04-01

    The goal of this report is to provide insight into the information technology needs of law enforcement based on first hand observations as an embedded and active participant over the course of two plus years. This report is intended as a preliminary roadmap for technology and project investment that will benefit the entire law enforcement community nationwide. Some recommendations are immediate and have more of an engineering flavor, while others are longer term and will require research and development to solve.

  14. Piloting the feasibility of head-mounted video technology to augment student feedback during simulated clinical decision-making: An observational design pilot study.

    Science.gov (United States)

    Forbes, Helen; Bucknall, Tracey K; Hutchinson, Alison M

    2016-04-01

    Clinical decision-making is a complex activity that is critical to patient safety. Simulation, augmented by feedback, affords learners the opportunity to learn critical clinical decision-making skills. More detailed feedback following simulation exercises has the potential to further enhance student learning, particularly in relation to developing improved clinical decision-making skills. To investigate the feasibility of head-mounted video camera recordings, to augment feedback, following acute patient deterioration simulations. Pilot study using an observational design. Ten final-year nursing students participated in three simulation exercises, each focussed on detection and management of patient deterioration. Two observers collected behavioural data using an adapted version of Gaba's Clinical Simulation Tool, to provide verbal feedback to each participant, following each simulation exercise. Participants wore a head-mounted video camera during the second simulation exercise only. Video recordings were replayed to participants to augment feedback, following the second simulation exercise. Data were collected on: participant performance (observed and perceived); participant perceptions of feedback methods; and head-mounted video camera recording feasibility and capability for detailed audio-visual feedback. Management of patient deterioration improved for six participants (60%). Increased perceptions of confidence (70%) and competence (80%), were reported by the majority of participants. Few participants (20%) agreed that the video recording specifically enhanced their learning. The visual field of the head-mounted video camera was not always synchronised with the participant's field of vision, thus affecting the usefulness of some recordings. The usefulness of the video recordings, to enhance verbal feedback to participants on detection and management of simulated patient deterioration, was inconclusive. Modification of the video camera glasses, to improve

  15. Use of Persuasive Technology to Change End-Users- IT Security Aware Behaviour: A Pilot Study

    OpenAIRE

    Ai Cheo Yeo; Md. Mahbubur Rahim; Yin Ying Ren

    2008-01-01

    Persuasive technology has been applied in marketing, health, environmental conservation, safety and other domains and is found to be quite effective in changing people-s attitude and behaviours. This research extends the application domains of persuasive technology to information security awareness and uses a theory-driven approach to evaluate the effectiveness of a web-based program developed based on the principles of persuasive technology to improve the information sec...

  16. Innovationsallianz Green Carbody Technologies - mit energieeffizienterer und ressourcenschonenderer Technik produzieren: Presentation held at Conference on "Strategies in Car Body Engineering 2013", 19 - 20 March 2013, Bad Nauheim

    OpenAIRE

    Putz, Matthias

    2013-01-01

    The Innovation Alliance Green Carbody Technologies InnoCaT researched in the years 2010 - 2012 for efficient solutions along the process chain "painted car body" including the tool shop, the press shop through body shop to the painted body under the approach of holistic planning. Examples of the results are planning of low-energy production, the energy-efficient climate control of enclosures, the automatic adjustment of body devices, resource-efficient sheet metal hot stamping and so on. All ...

  17. The influence of mechatronic learning systems on creative problem solving of pupils participating in technology class A pilot study

    Directory of Open Access Journals (Sweden)

    Kai-Christian Tönnsen

    2017-12-01

    Full Text Available Without being creative and finding solutions for various problems of life mankind wouldn’t be what it is today. Problem solving always has been a key ability for development, in the past, the present and it will also be a key for the future. Creative problem solving is one of the most important ways of technical thinking and acting. Therefore, the ability of finding solutions for problems and realizing them is a primary goal for technological education, especially if it is part of a comprehensive school education. It can be assumed that the available resources affect the possibilities and the result of problem solving processes. In terms of technology classes there are numerous resources that aim for the development of pupils’ creative problem solving skills like for instance mechatronic educational environments (MEEs. Unfortunately there is currently no test instrument for rating the influence of these MEEs on the outcome in terms of creative technical problem solving processes. Therefore, we designed a trial for such purpose and tested it in a pilot study: 33 students (9th grade, average age of 15.24 years of comprehensive schools were given a problem, which had to be solved using three different MEEs. Solutions found by the students have been documented and analyzed to identify system characteristics which enhance or inhibit the creative outcome.Key words: Creative problem solving, technology education, mechatronic educational environments, Festo MecLab, Fischertechnik RoboTX, Lego Mindstorms EV3

  18. SMS for Life: a pilot project to improve anti-malarial drug supply management in rural Tanzania using standard technology

    Directory of Open Access Journals (Sweden)

    Mwafongo Winfred

    2010-10-01

    Full Text Available Abstract Background Maintaining adequate supplies of anti-malarial medicines at the health facility level in rural sub-Saharan Africa is a major barrier to effective management of the disease. Lack of visibility of anti-malarial stock levels at the health facility level is an important contributor to this problem. Methods A 21-week pilot study, 'SMS for Life', was undertaken during 2009-2010 in three districts of rural Tanzania, involving 129 health facilities. Undertaken through a collaborative partnership of public and private institutions, SMS for Life used mobile telephones, SMS messages and electronic mapping technology to facilitate provision of comprehensive and accurate stock counts from all health facilities to each district management team on a weekly basis. The system covered stocks of the four different dosage packs of artemether-lumefantrine (AL and quinine injectable. Results Stock count data was provided in 95% of cases, on average. A high response rate (≥ 93% was maintained throughout the pilot. The error rate for composition of SMS responses averaged 7.5% throughout the study; almost all errors were corrected and messages re-sent. Data accuracy, based on surveillance visits to health facilities, was 94%. District stock reports were accessed on average once a day. The proportion of health facilities with no stock of one or more anti-malarial medicine (i.e. any of the four dosages of AL or quinine injectable fell from 78% at week 1 to 26% at week 21. In Lindi Rural district, stock-outs were eliminated by week 8 with virtually no stock-outs thereafter. During the study, AL stocks increased by 64% and quinine stock increased 36% across the three districts. Conclusions The SMS for Life pilot provided visibility of anti-malarial stock levels to support more efficient stock management using simple and widely available SMS technology, via a public-private partnership model that worked highly effectively. The SMS for Life system has

  19. SMS for Life: a pilot project to improve anti-malarial drug supply management in rural Tanzania using standard technology

    Science.gov (United States)

    2010-01-01

    Background Maintaining adequate supplies of anti-malarial medicines at the health facility level in rural sub-Saharan Africa is a major barrier to effective management of the disease. Lack of visibility of anti-malarial stock levels at the health facility level is an important contributor to this problem. Methods A 21-week pilot study, 'SMS for Life', was undertaken during 2009-2010 in three districts of rural Tanzania, involving 129 health facilities. Undertaken through a collaborative partnership of public and private institutions, SMS for Life used mobile telephones, SMS messages and electronic mapping technology to facilitate provision of comprehensive and accurate stock counts from all health facilities to each district management team on a weekly basis. The system covered stocks of the four different dosage packs of artemether-lumefantrine (AL) and quinine injectable. Results Stock count data was provided in 95% of cases, on average. A high response rate (≥ 93%) was maintained throughout the pilot. The error rate for composition of SMS responses averaged 7.5% throughout the study; almost all errors were corrected and messages re-sent. Data accuracy, based on surveillance visits to health facilities, was 94%. District stock reports were accessed on average once a day. The proportion of health facilities with no stock of one or more anti-malarial medicine (i.e. any of the four dosages of AL or quinine injectable) fell from 78% at week 1 to 26% at week 21. In Lindi Rural district, stock-outs were eliminated by week 8 with virtually no stock-outs thereafter. During the study, AL stocks increased by 64% and quinine stock increased 36% across the three districts. Conclusions The SMS for Life pilot provided visibility of anti-malarial stock levels to support more efficient stock management using simple and widely available SMS technology, via a public-private partnership model that worked highly effectively. The SMS for Life system has the potential to alleviate

  20. Information Brief on Green Power Marketing, 2nd Edition

    Energy Technology Data Exchange (ETDEWEB)

    Sweezey, B.; Houston, A.

    1998-02-01

    This document is the second in a series of information briefs on green power marketing activity in the United States. It includes descriptions of utility green pricing programs, green power marketing activity, retail access legislation and pilot programs, and other data and information supporting the development of green power markets.

  1. Pilot scale intensification of rubber seed (Hevea brasiliensis) oil via chemical interesterification using hydrodynamic cavitation technology.

    Science.gov (United States)

    Bokhari, Awais; Yusup, Suzana; Chuah, Lai Fatt; Klemeš, Jiří Jaromír; Asif, Saira; Ali, Basit; Akbar, Majid Majeed; Kamil, Ruzaimah Nik M

    2017-10-01

    Chemical interesterification of rubber seed oil has been investigated for four different designed orifice devices in a pilot scale hydrodynamic cavitation (HC) system. Upstream pressure within 1-3.5bar induced cavities to intensify the process. An optimal orifice plate geometry was considered as plate with 1mm dia hole having 21 holes at 3bar inlet pressure. The optimisation results of interesterification were revealed by response surface methodology; methyl acetate to oil molar ratio of 14:1, catalyst amount of 0.75wt.% and reaction time of 20min at 50°C. HC is compared to mechanical stirring (MS) at optimised values. The reaction rate constant and the frequency factor of HC were 3.4-fold shorter and 3.2-fold higher than MS. The interesterified product was characterised by following EN 14214 and ASTM D 6751 international standards. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Towards green loyalty: the influences of green perceived risk, green image, green trust and green satisfaction

    Science.gov (United States)

    Chrisjatmiko, K.

    2018-01-01

    The paper aims to present a comprehensive framework for the influences of green perceived risk, green image, green trust and green satisfaction to green loyalty. The paper also seeks to account explicitly for the differences in green perceived risk, green image, green trust, green satisfaction and green loyalty found among green products customers. Data were obtained from 155 green products customers. Structural equation modeling was used in order to test the proposed hypotheses. The findings show that green image, green trust and green satisfaction has positive effects to green loyalty. But green perceived risk has negative effects to green image, green trust and green satisfaction. However, green perceived risk, green image, green trust and green satisfaction also seems to be a good device to gain green products customers from competitors. The contributions of the paper are, firstly, a more complete framework of the influences of green perceived risk, green image, green trust and green satisfaction to green loyalty analyses simultaneously. Secondly, the study allows a direct comparison of the difference in green perceived risk, green image, green trust, green satisfaction and green loyalty between green products customers.

  3. How Green is 'Green' Energy?

    Science.gov (United States)

    Gibson, Luke; Wilman, Elspeth N; Laurance, William F

    2017-12-01

    Renewable energy is an important piece of the puzzle in meeting growing energy demands and mitigating climate change, but the potentially adverse effects of such technologies are often overlooked. Given that climate and ecology are inextricably linked, assessing the effects of energy technologies requires one to consider their full suite of global environmental concerns. We review here the ecological impacts of three major types of renewable energy - hydro, solar, and wind energy - and highlight some strategies for mitigating their negative effects. All three types can have significant environmental consequences in certain contexts. Wind power has the fewest and most easily mitigated impacts; solar energy is comparably benign if designed and managed carefully. Hydropower clearly has the greatest risks, particularly in certain ecological and geographical settings. More research is needed to assess the environmental impacts of these 'green' energy technologies, given that all are rapidly expanding globally. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Developing an integrated technology roadmapping process to meet regional technology planning needs: the e-bike pilot study

    NARCIS (Netherlands)

    Cowan, Kelly R.; Daim, Tugrul U.; Walsh, Steven Thomas; Kocaoglu, Dundar F.; Anderson, Timothy R.; Daim, Tugrul U.; Kozanoglu, Dilek Cetindamar; Niwa, Kiyoshi; Perman, Gary

    2014-01-01

    Smart grid is a promising class of new technologies offering many potential benefits for electric utility systems, including possibilities for smart appliances which can communicate with power systems and help to better match supply and demand. Additional services include the ability to better

  5. Analytical technology in support of the Waste Isolation Pilot Plant (WIPP)

    International Nuclear Information System (INIS)

    Villareal, R.

    1994-01-01

    The need for long-term disposal of defense-related transuranic (TRU) wastes became apparent as the DOE recognized the environmental consequences of maintaining waste storage facilities designed for short or interim storage periods, not long-term storage. In 1979, Congress authorized the Waste Isolation Pilot Plant (WIPP), a research and development facility and full-scale pilot plant, to demonstrate the safe management, storage, and disposal of TRU wastes. Environmental Protection Agency (EPA) regulations governing disposal of TRU wastes in 40 CFR 191 require that TRU waste disposal systems be designed to limit migration of radionuclides to the accessible environment for 10,000 years based on performance assessment results. The actinide source-term waste test program (STTP) is an experiment designed to quantitatively measure the time-dependent concentrations of plutonium, uranium, neptunium, thorium, and americium in TRU wastes immersed in brines that simulate the chemistry that may occur in WIPP disposal rooms, partially or completely contacted with brines. The total concentration of each actinide in brine is the sum of its dissolved and colloidally suspended components, as determined by variables including pcH, oxidation-reduction potential (Eh), chelating and complexing agents, sorption capacity, and colloidal suspension capabilities. To determine the effect of influencing variables on the concentration of actinides in WIPP brines, several TRU waste types will be characterized and loaded into specially designed noncorrosive test containers filled with brine containing additives to enhance the action of each influencing variable. The test container brine and headspace gases will be analyzed

  6. Application of radiation technology to develop green tea leaf as a natural resource for the cosmetic industry

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Jo, Cheorun; Lee, Ju Woon; Jo, Sung Kee; Kim, Kwan Soo

    2004-01-01

    The irradiation of natural resources such as green tea leaf, persimmon leaf, licorice root and stolon or Lonicera japonica improved the color of the extract, resulting in a higher applicability without any adverse change to the beneficial functions such as the inhibitory effects of oxidation, melanin hyperpigmentation on the skin, and others. To investigate the application of irradiated natural resources for a real cosmetic composition, the physiological activities of irradiated green tea leaf extract powder dissolved in butylene glycol and ethanol were compared to a commercial green tea extract product. Furthermore, a cream lotion was manufactured using the powder and the physiological activities were compared. Results showed that the irradiation of the green tea leaf extract and the freeze-dried powder from the extract had the same physiological activities as the commercial product in a cosmetic composition

  7. Factors related to the implementation and diffusion of new technologies: a pilot study

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    In order to develop an understanding of how government intervention affects the processes of implementation and diffusion of new technologies, case studies of 14 technologies were carried out: automobiles; broadcast radio; frozen foods; black and white TV; color TV; polio vaccine; supersonic transport; fluoridation of water supplies; computer-aided instruction; basic oxygen process for steel; numerical control in manufacturing; digital computers; lasers; and integrated circuit. The key factors, their motivations for implementing/adopting the technology (or not doing so), the interactions among the key factors, and how these affected implementation/adoption are examined.

  8. GreenSynFuels. Economical and technological statement regarding integration and storage of renewable energy in the energy sector by production of green synthetic fuels for utilization in fuel cells. Final project report

    Energy Technology Data Exchange (ETDEWEB)

    Lebaek, J. (Danish Technological Institute, Aarhus (Denmark)); Boegild Hansen, J. (Haldor Topsoee, Kgs. Lyngby (Denmark)); Mogensen, Mogens (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy, Roskilde (Denmark)) (and others)

    2011-03-15

    The purpose of the project is to select and validate technology concepts for the establishment of a Danish production of green synthetic fuels primarily for fuel cells. The feasibility of the selected concepts is assessed trough a techno-economical calculation, which includes mass and energy balances and economics including CAPEX and OPEX assessments. It is envisioned by the project partners that a production of green synthetic fuels, such as methanol, can 1) bring stability to a future electricity grid with a high share of renewable energy, 2) replace fossil fuels in the transport sector, and 3) boost Danish green technology export. In the project, two technology concepts were derived through carefully considerations and plenum discussions by the project group members: Concept 1): Methanol/DME Synthesis based on Electrolysis assisted Gasification of Wood. Concept 2): Methanol/DME synthesis based on biogas temporarily stored in the natural gas network. Concept 1) is clearly the most favored by the project group and is therefore analyzed for its techno-economic feasibility. Using mass and energy balances the technical perspectives of the concept were investigated, along with an economic breakdown of the CAPEX and OPEX cost of the methanol production plant. The plant was technically compared to a traditional methanol production plant using gasified biomass. The project group has decided to focus on large scale plants, as the scale economics favor large scale plants. Therefore, the dimensioning input of the concept 1) plant is 1000 tons wood per day. This is truly a large scale gasification plant; however, in a methanol synthesis context the plant is not particularly large. The SOEC electrolyzer unit is dimensioned by the need of hydrogen to balance the stoichiometric ratio of the methanol synthesis reaction, which will result in 141 MW installed SOEC. The resulting methanol output is 1,050 tons methanol per day. In comparison to a traditional methanol synthesis plant

  9. Treatment of allergic rhinitis using mobile technology with real-world data: The MASK observational pilot study.

    Science.gov (United States)

    Bousquet, J; Devillier, P; Arnavielhe, S; Bedbrook, A; Alexis-Alexandre, G; van Eerd, M; Murray, R; Canonica, G W; Illario, M; Menditto, E; Passalacqua, G; Stellato, C; Triggiani, M; Carreiro-Martins, P; Fonseca, J; Morais Almeida, M; Nogueira-Silva, L; Pereira, A M; Todo Bom, A; Bosse, I; Caimmi, D; Demoly, P; Fontaine, J F; Just, J; Onorato, G L; Kowalski, M L; Kuna, P; Samolinski, B; Anto, J M; Mullol, J; Valero, A; Tomazic, P V; Bergmann, K C; Keil, T; Klimek, L; Mösges, R; Shamai, S; Zuberbier, T; Murphy, E; McDowall, P; Price, D; Ryan, D; Sheikh, A; Chavannes, N H; Fokkens, W J; Kvedariene, V; Valiulis, A; Bachert, C; Hellings, P W; Kull, I; Melen, E; Wickman, M; Bindslev-Jensen, C; Eller, E; Haahtela, T; Papadopoulos, N G; Annesi-Maesano, I; Bewick, M; Bosnic-Anticevich, S; Cruz, A A; De Vries, G; Gemicioglu, B; Larenas-Linnemann, D; Laune, D; Mathieu-Dupas, E; O'Hehir, R E; Pfaar, O; Portejoie, F; Siroux, V; Spranger, O; Valovirta, E; VandenPlas, O; Yorgancioglu, A

    2018-01-15

    Large observational implementation studies are needed to triangulate the findings from randomized control trials as they reflect "real-world" everyday practice. In a pilot study, we attempted to provide additional and complementary insights on the real-life treatment of allergic rhinitis (AR) using mobile technology. A mobile phone app (Allergy Diary, freely available in Google Play and Apple App stores) collects the data of daily visual analog scales (VAS) for (i) overall allergic symptoms, (ii) nasal, ocular, and asthma symptoms, (iii) work, as well as (iv) medication use using a treatment scroll list including all medications (prescribed and over the counter (OTC)) for rhinitis customized for 15 countries. A total of 2871 users filled in 17 091 days of VAS in 2015 and 2016. Medications were reported for 9634 days. The assessment of days appeared to be more informative than the course of the treatment as, in real life, patients do not necessarily use treatment on a daily basis; rather, they appear to increase treatment use with the loss of symptom control. The Allergy Diary allowed differentiation between treatments within or between classes (intranasal corticosteroid use containing medications and oral H1-antihistamines). The control of days differed between no [best control], single, or multiple treatments (worst control). This study confirms the usefulness of the Allergy Diary in accessing and assessing everyday use and practice in AR. This pilot observational study uses a very simple assessment (VAS) on a mobile phone, shows novel findings, and generates new hypotheses. © 2018 EAACI and John Wiley and Sons A/S. Published by John Wiley and Sons Ltd.

  10. Extended Operations of the Pratt & Whitney Rocketdyne Pilot-Scale Compact Reformer: Year 6 - Activity 3.2 - Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Almlie, Jay

    2011-10-01

    U.S. and global demand for hydrogen is large and growing for use in the production of chemicals, materials, foods, pharmaceuticals, and fuels (including some low-carbon biofuels). Conventional hydrogen production technologies are expensive, have sizeable space requirements, and are large carbon dioxide emitters. A novel sorbent-based hydrogen production technology is being developed and advanced toward field demonstration that promises smaller size, greater efficiency, lower costs, and reduced to no net carbon dioxide emissions compared to conventional hydrogen production technology. Development efforts at the pilot scale have addressed materials compatibility, hot-gas filtration, and high-temperature solids transport and metering, among other issues, and have provided the basis for a preliminary process design with associated economics. The process was able to achieve a 93% hydrogen purity on a purge gasfree basis directly out of the pilot unit prior to downstream purification.

  11. Smart City Pilot Projects Using LoRa and IEEE802.15.4 Technologies.

    Science.gov (United States)

    Pasolini, Gianni; Buratti, Chiara; Feltrin, Luca; Zabini, Flavio; De Castro, Cristina; Verdone, Roberto; Andrisano, Oreste

    2018-04-06

    Information and Communication Technologies (ICTs), through wireless communications and the Internet of Things (IoT) paradigm, are the enabling keys for transforming traditional cities into smart cities, since they provide the core infrastructure behind public utilities and services. However, to be effective, IoT-based services could require different technologies and network topologies, even when addressing the same urban scenario. In this paper, we highlight this aspect and present two smart city testbeds developed in Italy. The first one concerns a smart infrastructure for public lighting and relies on a heterogeneous network using the IEEE 802.15.4 short-range communication technology, whereas the second one addresses smart-building applications and is based on the LoRa low-rate, long-range communication technology. The smart lighting scenario is discussed providing the technical details and the economic benefits of a large-scale (around 3000 light poles) flexible and modular implementation of a public lighting infrastructure, while the smart-building testbed is investigated, through measurement campaigns and simulations, assessing the coverage and the performance of the LoRa technology in a real urban scenario. Results show that a proper parameter setting is needed to cover large urban areas while maintaining the airtime sufficiently low to keep packet losses at satisfactory levels.

  12. Smart City Pilot Projects Using LoRa and IEEE802.15.4 Technologies

    Directory of Open Access Journals (Sweden)

    Gianni Pasolini

    2018-04-01

    Full Text Available Information and Communication Technologies (ICTs, through wireless communications and the Internet of Things (IoT paradigm, are the enabling keys for transforming traditional cities into smart cities, since they provide the core infrastructure behind public utilities and services. However, to be effective, IoT-based services could require different technologies and network topologies, even when addressing the same urban scenario. In this paper, we highlight this aspect and present two smart city testbeds developed in Italy. The first one concerns a smart infrastructure for public lighting and relies on a heterogeneous network using the IEEE 802.15.4 short-range communication technology, whereas the second one addresses smart-building applications and is based on the LoRa low-rate, long-range communication technology. The smart lighting scenario is discussed providing the technical details and the economic benefits of a large-scale (around 3000 light poles flexible and modular implementation of a public lighting infrastructure, while the smart-building testbed is investigated, through measurement campaigns and simulations, assessing the coverage and the performance of the LoRa technology in a real urban scenario. Results show that a proper parameter setting is needed to cover large urban areas while maintaining the airtime sufficiently low to keep packet losses at satisfactory levels.

  13. Partitioning technologies and actinide science: towards pilot facilities in Europe (ACSEPT project)

    International Nuclear Information System (INIS)

    Bourg, S.; Hill, C.; Ouvrier, N.

    2010-01-01

    ACSEPT is an essential contribution to the demonstration, in the long term, of the potential benefits of actinide recycling to minimize the burden on the geological repositories. To succeed, ACSEPT is organized into three technical domains: (i) Considering technically mature aqueous separation processes, ACSEPT works to optimize and select the most promising ones dedicated either to actinide partitioning or to grouped actinide separation. A substantial review was undertaken either to be sure that the right molecule families are being studied, or, on the contrary, to identify new candidates. Results of the first hot tests allowed the validation of some process options. (ii) Concerning pyrochemical separation processes, ACSEPT is focused on the enhancement of the two reference cores of process selected within EUROPART with specific attention to the exhaustive electrolysis in molten chloride (quantitative recovery of the actinides with the lowest amount of fission products) and to actinide back-extraction from an An-Al alloy. R and D efforts are also brought to key scientific and technical issues compulsory for building a complete separation process (head-end steps, salt treatment for recycling and waste management). (iii) By integrating all the experimental results within engineering and systems studies, both in hydro and pyro domains, ACSEPT will deliver relevant flowsheets and recommendations to prepare for future demonstration at a pilot level, in relation with strategies developed through the SNE-TP. In addition, a training and education programme is implemented to share the knowledge among the partitioning community and the future generations of researchers

  14. Effect of NTP technology levels on engine sizing for a 2005 piloted Mars mission

    Science.gov (United States)

    Burr, Annette D.; Cross, Elden H.; Widman, Frederick W.; North, D. Michael

    1993-01-01

    Previous vehicle mass studies were performed for Mars launch windows in the 2010-2018 time frame. Within the last year, a study was performed to determine the effects of various Nuclear Thermal Propulsion (NTP) engine and mission parameters on Initial Mass in Low Earth Orbit (MLEO) for a piloted Mars mission during the 2005 opportunity. Particle Bed Reactor (PBR) and Enabler-type reactors were compared. Parameters evaluated included engine thrust, number of engines, number of Trans-Mars Injection (TMI) burns, engine thrust/weight, engine out capability, engine burn time, and Isp. Earth and Mars departure dates and outbound and return travel times were optimized for a 240-day total interplanetary transfer time (long-duration stay mission). Parameters which were seen to reduce IMLEO included a greater number of perigee burns, multiple engines, and higher Isp. Optimum engine thrust varied substantially depending on the configuration. Engine models developed jointly by Rocketdyne and Westinghouse within the last year formed the basis for the Enabler thrust optimization study.

  15. A Pilot Project – From Illiteracy to Computer Literacy: Teaching and Learning Using Information Technology

    Directory of Open Access Journals (Sweden)

    Mohamad Adnan Al-Alaoui

    2008-09-01

    Full Text Available This paper addresses the use of information and communication technologies, ICT or IT for brevity, to combat illiteracy and move participants directly from illiteracy to computer literacy. The resulting assistive technology and instructional software and hardware can be employed to speed up literacy programs and make them more attractive and effective. The approach provides an interactive, self-paced, autonomous and entertaining learning experience, eases entry and exit in and out of the program, and permits monitoring and updating progress status. The hallmark of the proposed approach is the integration of speech and handwriting recognition, as well as audio and visual aids into the flow.

  16. Safe driving in a green world: a review of driver performance benchmarks and technologies to support 'smart' driving.

    Science.gov (United States)

    Young, Mark S; Birrell, Stewart A; Stanton, Neville A

    2011-05-01

    Road transport is a significant source of both safety and environmental concerns. With climate change and fuel prices increasingly prominent on social and political agendas, many drivers are turning their thoughts to fuel efficient or 'green' (i.e., environmentally friendly) driving practices. Many vehicle manufacturers are satisfying this demand by offering green driving feedback or advice tools. However, there is a legitimate concern regarding the effects of such devices on road safety--both from the point of view of change in driving styles, as well as potential distraction caused by the in-vehicle feedback. In this paper, we appraise the benchmarks for safe and green driving, concluding that whilst they largely overlap, there are some specific circumstances in which the goals are in conflict. We go on to review current and emerging in-vehicle information systems which purport to affect safe and/or green driving, and discuss some fundamental ergonomics principles for the design of such devices. The results of the review are being used in the Foot-LITE project, aimed at developing a system to encourage 'smart'--that is safe and green--driving. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  17. Atrazine, chlorpyrifos, and iprodione effect on the biodiversity of bacteria, actinomycetes, and fungi in a pilot biopurification system with a green cover.

    Science.gov (United States)

    Elgueta, Sebastian; Correa, Arturo; Campo, Marco; Gallardo, Felipe; Karpouzas, Dimitrios; Diez, Maria Cristina

    2017-09-02

    The use of biopurification systems can mitigate the effects of pesticide contamination on farms. The primary aim of this study was to evaluate the effect of pesticide dissipation on microbial communities in a pilot biopurification system. The pesticide dissipation of atrazine, chlorpyrifos and iprodione (35 mg kg -1 active ingredient [a.i.]) and biological activity were determined for 40 days. The microbial communities (bacteria, actinomycetes and fungi) were analyzed using denaturing gradient gel electrophoresis (DGGE). In general, pesticide dissipation was the highest by day 5 and reached 95%. The pesticides did not affect biological activity during the experiment. The structure of the actinomycete and bacterial communities in the rhizosphere was more stable during the evaluation than that in the communities in the control without pesticides. The rhizosphere fungal communities, detected using DGGE, showed small and transitory shifts with time. To conclude, rhizosphere microbial communities were not affected during pesticide dissipation in a pilot biopurification system.

  18. The Use of 3D Printing Technology in the Ilizarov Method Treatment: Pilot Study.

    Science.gov (United States)

    Burzyńska, Karolina; Morasiewicz, Piotr; Filipiak, Jarosław

    2016-01-01

    Significant developments in additive manufacturing technology have occurred in recent years. 3D printing techniques can also be helpful in the Ilizarov method treatment. The aim of this study was to evaluate the usefulness of 3D printing technology in the Ilizarov method treatment. Physical models of bones used to plan the spatial design of Ilizarov external fixator were manufactured by FDM (Fused Deposition Modeling) spatial printing technology. Bone models were made of poly(L-lactide) (PLA). Printed 3D models of both lower leg bones allow doctors to prepare in advance for the Ilizarov method treatment: detailed consideration of the spatial configuration of the external fixation, experimental assembly of the Ilizarov external fixator onto the physical models of bones prior to surgery, planning individual osteotomy level and Kirschner wires introduction sites. Printed 3D bone models allow for accurate preparation of the Ilizarov apparatus spatially matched to the size of the bones and prospective bone distortion. Employment of the printed 3D models of bone will enable a more precise design of the apparatus, which is especially useful in multiplanar distortion and in the treatment of axis distortion and limb length discrepancy in young children. In the course of planning the use of physical models manufactured with additive technology, attention should be paid to certain technical aspects of model printing that have an impact on the accuracy of mapping of the geometry and physical properties of the model. 3D printing technique is very useful in 3D planning of the Ilizarov method treatment.

  19. How Prepared Are Our Pre-Service Teachers to Integrate Technology? A Pilot Study

    Science.gov (United States)

    Sweeney, Trudy; Drummond, Aaron

    2013-01-01

    This study examines pre-service teachers' technological, pedagogical and content knowledge and the relationships between the factors influencing the development of this knowledge. It concludes with a discussion about the major implications of these findings for the improvement of pre-service teacher education courses. The participants were…

  20. Feasibility of electro-osmotic belt filter dewatering technology at pilot scale

    CSIR Research Space (South Africa)

    Snyman, HG

    2000-01-01

    Full Text Available -air. The technology was found as sensitive to polyelectrolyte dosages as belt presses. The performance of the electro-osmotic belt filter was sensitive to feed rate, but performed well with non-thickened waste activated sludge (0.61% solids), resulting in cake solids...

  1. A pilot-scale microwave technology for sludge sanitization and drying

    NARCIS (Netherlands)

    Mawioo, P.M.; Garcia, Hector A.; Hooijmans, Christine M.; Velkushanova, Konstantina; Simonič, Marjana; Mijatović, Ivan; Brdanovic, Damir

    2017-01-01

    Large volumes of sludge are produced from onsite sanitation systems in densely populated areas (e.g. slums and emergency settlements) and wastewater treatment facilities that contain high amounts of pathogens. There is a need for technological options which can effectively treat the rapidly

  2. Pilot cultivation of the green alga Monoraphidium sp producing a high content of polyunsaturated fatty acids in a low-temperature environment

    Czech Academy of Sciences Publication Activity Database

    Řezanka, Tomáš; Nedbalová, Linda; Lukavský, Jaromír; Střížek, A.; Sigler, Karel

    2017-01-01

    Roč. 22, MAR 2017 (2017), s. 160-165 ISSN 2211-9264 R&D Projects: GA ČR GA14-00227S; GA TA ČR TE01020080 Institutional support: RVO:61388971 ; RVO:67985939 Keywords : Monoraphidium sp. * Microalgae * Pilot cultivation Subject RIV: EE - Microbiology, Virology; EF - Botanics (BU-J) OBOR OECD: Microbiology; Plant sciences, botany (BU-J) Impact factor: 3.994, year: 2016

  3. The use of new technologies for nutritional education in primary schools: a pilot study.

    Science.gov (United States)

    Rosi, A; Dall'Asta, M; Brighenti, F; Del Rio, D; Volta, E; Baroni, I; Nalin, M; Coti Zelati, M; Sanna, A; Scazzina, F

    2016-11-01

    The aim of this study was evaluating if the presence of a humanoid robot could improve the efficacy of a game-based, nutritional education intervention. This was a controlled, school-based pilot intervention carried out on fourth-grade school children (8-10 years old). A total of 112 children underwent a game-based nutritional educational lesson on the importance of carbohydrates. For one group (n = 58), the lesson was carried out by a nutritional educator, the Master of Taste (MT), whereas for another group, (n = 54) the Master of Taste was supported by a humanoid robot (MT + NAO). A third group of children (n = 33) served as control not receiving any lesson. The intervention efficacy was evaluated by questionnaires administered at the beginning and at the end of each intervention. The nutritional knowledge level was evaluated by the cultural-nutritional awareness factor (AF) score. A total of 290 questionnaires were analyzed. Both MT and MT + NAO interventions significantly increased nutritional knowledge. At the end of the study, children in the MT and MT + NAO group showed similar AF scores, and the AF scores of both intervention groups were significantly higher than the AF score of the control group. This study showed a significant increase in the nutritional knowledge of children involved in a game-based, single-lesson, educational intervention performed by a figure that has a background in food science. However, the presence of a humanoid robot to support this figure's teaching activity did not result in any significant learning improvement. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  4. Wean earlier and automatically with new technology (the WEAN study). A multicenter, pilot randomized controlled trial.

    Science.gov (United States)

    Burns, Karen E A; Meade, Maureen O; Lessard, Martin R; Hand, Lori; Zhou, Qi; Keenan, Sean P; Lellouche, Francois

    2013-06-01

    Automated weaning has not been compared with a paper-based weaning protocol in North America. We conducted a pilot randomized trial comparing automated weaning with protocolized weaning in critically ill adults to evaluate clinician compliance and acceptance of the weaning and sedation protocols, recruitment, and impact on outcomes. From August 2007 to October 2009, we enrolled critically ill adults requiring more than 24 hours of mechanical ventilation and at least partial reversal of the condition precipitating respiratory failure at nine Canadian intensive care units. We randomized patients who tolerated at least 30 minutes of pressure support and either failed or were not yet ready to undergo a spontaneous breathing trial to automated or protocolized weaning. Both groups used pressure support, included spontaneous breathing trials, used a common positive end-expiratory pressure-FI(O(2)) chart, sedation protocol, and criteria for extubation, reintubation, and noninvasive ventilation. We recruited 92 patients (49 automated, 43 protocolized) over 26 months. Adherence to assigned weaning protocols and extreme sedation scale scores fell within prespecified thresholds. Combined physician-respiratory therapist and nurse acceptance scores of the study weaning and sedation protocols, respectively, were not significantly different. Automated weaning patients had significantly shorter median times to first successful spontaneous breathing trial (1.0 vs. 4.0 d; P 4.0 d; P = 0.02), and successful extubation (4.0 vs. 5.0 d; P = 0.01), and underwent fewer tracheostomies and episodes of protracted ventilation. Compared with a standardized protocol, automated weaning was associated with promising outcomes that warrant further investigation. Minor protocol modifications may increase compliance, facilitate recruitment, and enhance feasibility. Clinical trial registered with www.controlled-trials.com (ISRCTN43760151).

  5. Multi-Pollutant Emissions Control: Pilot Plant Study of Technologies for Reducing Hg, SO3, NOx and CO2 Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Fenger; Richard A. Winschel

    2005-08-31

    A slipstream pilot plant was built and operated to investigate technology to adsorb mercury (Hg) onto the existing particulate (i.e., fly ash) by cooling flue gas to 200-240 F with a Ljungstrom-type air heater or with water spray. The mercury on the fly ash was then captured in an electrostatic precipitator (ESP). An alkaline material, magnesium hydroxide (Mg(OH){sub 2}), is injected into flue gas upstream of the air heater to control sulfur trioxide (SO{sub 3}), which prevents acid condensation and corrosion of the air heater and ductwork. The slipstream was taken from a bituminous coal-fired power plant. During this contract, Plant Design and Construction (Task 1), Start Up and Maintenance (Task 2), Baseline Testing (Task 3), Sorbent Testing (Task 4), Parametric Testing (Task 5), Humidification Tests (Task 6), Long-Term Testing (Task 7), and a Corrosion Study (Task 8) were completed. The Mercury Stability Study (Task 9), ESP Report (Task 11), Air Heater Report (Task 12) and Final Report (Task 14) were completed. These aspects of the project, as well as progress on Public Outreach (Task 15), are discussed in detail in this final report. Over 90% mercury removal was demonstrated by cooling the flue gas to 200-210 F at the ESP inlet; baseline conditions with 290 F flue gas gave about 26% removal. Mercury removal is sensitive to flue gas temperature and carbon content of fly ash. At 200-210 F, both elemental and oxidized mercury were effectively captured at the ESP. Mg(OH){sub 2} injection proved effective for removal of SO{sub 3} and eliminated rapid fouling of the air heater. The pilot ESP performed satisfactorily at low temperature conditions. Mercury volatility and leaching tests did not show any stability problems. No significant corrosion was detected at the air heater or on corrosion coupons at the ESP. The results justify larger-scale testing/demonstration of the technology. These conclusions are presented and discussed in two presentations given in July and

  6. Creation of Polyurethane Injection Materials, Their Pilot-industrial Production, Development and Industrial Introduction of the Technology of Strengthening and Restoring the Operability of Damaged Constructions and Buildings

    Directory of Open Access Journals (Sweden)

    Marukha, V.І.

    2015-01-01

    Full Text Available Polyurethane and foam polyurethane fluid injection materials not conceding foreign analogues and technology technology of restoration and strengthening the operability of concrete and reinforced concrete structures and buildings damaged by cracks were developed. Normative and technical documentation on the injection materials and technological processes was created. The diagnosticrestoring complex for implementing the above technologies was designed, installed and utilized at the construction sites. The equipment is designed and manufactured; the technology of the research and industrial production of «A» and «B» components of injecting polyurethane materials is designed and developed. The pilot-scale batch is manufactured. Technological processes of preparation and application of the «A» and «B» componentsof the injecting materials in industrial conditions are worked out and implemented.

  7. Integrating technology into cognitive behavior therapy for adolescent depression: a pilot study.

    Science.gov (United States)

    Kobak, Kenneth A; Mundt, James C; Kennard, Betsy

    2015-01-01

    Rapid advances in information technology and telecommunications have resulted in a dramatic increase in the use of mobile devices and the internet to enhance and facilitate access to treatment. Cognitive behavior therapy (CBT) is an empirically based treatment that is well suited for enhancement by new technologies, particularly with youth. To facilitate the dissemination of this evidence-based treatment, we developed a technology-enhanced CBT intervention for the treatment of adolescent depression consisting of (1) online therapist training (2) in-session use of tablets for teaching clients CBT concepts and skills, and (3) text messaging for between session homework reminders and self-monitoring. Eighteen licensed clinicians (social workers n = 7, psychologists n = 9) were randomized to have their patients receive either the intervention (CBT) or treatment as usual (TAU). Each clinician treated four adolescents for 12 weeks. Clinicians in the CBT arm completed an online tutorial on CBT treatment of adolescent depression, then received an iPad with access to patient education materials for teaching CBT concepts to patients during sessions. Individualized text messages were integrated into treatment for homework reminders, support, and outcomes measurement. Outcome measures included a 49-item multiple choice test for tutorial effectiveness; the system usability scale (SUS) for user satisfaction; quick inventory of depressive symptomatology-adolescent version (QIDS-A-Pat); and clinician and patient ratings on the therapeutic alliance scale for adolescents (TASA). A significant increase in knowledge of CBT concepts was found after completing the tutorial, t(8) = 7.02, p higher in the CBT arm t(131) = 4.03, p = 0.001. A significant reduction in depression was found in both groups [t(34) = 8.453, p technology-enhanced CBT intervention as a means of improving CBT treatment of adolescent depression and may help address the critical shortage of therapists

  8. A natural language-based presentation of cognitive stimulation to people with dementia in assistive technology: A pilot study.

    Science.gov (United States)

    Dethlefs, Nina; Milders, Maarten; Cuayáhuitl, Heriberto; Al-Salkini, Turkey; Douglas, Lorraine

    2017-12-01

    Currently, an estimated 36 million people worldwide are affected by Alzheimer's disease or related dementias. In the absence of a cure, non-pharmacological interventions, such as cognitive stimulation, which slow down the rate of deterioration can benefit people with dementia and their caregivers. Such interventions have shown to improve well-being and slow down the rate of cognitive decline. It has further been shown that cognitive stimulation in interaction with a computer is as effective as with a human. However, the need to operate a computer often represents a difficulty for the elderly and stands in the way of widespread adoption. A possible solution to this obstacle is to provide a spoken natural language interface that allows people with dementia to interact with the cognitive stimulation software in the same way as they would interact with a human caregiver. This makes the assistive technology accessible to users regardless of their technical skills and provides a fully intuitive user experience. This article describes a pilot study that evaluated the feasibility of computer-based cognitive stimulation through a spoken natural language interface. Prototype software was evaluated with 23 users, including healthy elderly people and people with dementia. Feedback was overwhelmingly positive.

  9. Brain Activation in Response to Personalized Behavioral and Physiological Feedback From Self-Monitoring Technology: Pilot Study.

    Science.gov (United States)

    Whelan, Maxine E; Morgan, Paul S; Sherar, Lauren B; Kingsnorth, Andrew P; Magistro, Daniele; Esliger, Dale W

    2017-11-08

    The recent surge in commercially available wearable technology has allowed real-time self-monitoring of behavior (eg, physical activity) and physiology (eg, glucose levels). However, there is limited neuroimaging work (ie, functional magnetic resonance imaging [fMRI]) to identify how people's brains respond to receiving this personalized health feedback and how this impacts subsequent behavior. Identify regions of the brain activated and examine associations between activation and behavior. This was a pilot study to assess physical activity, sedentary time, and glucose levels over 14 days in 33 adults (aged 30 to 60 years). Extracted accelerometry, inclinometry, and interstitial glucose data informed the construction of personalized feedback messages (eg, average number of steps per day). These messages were subsequently presented visually to participants during fMRI. Participant physical activity levels and sedentary time were assessed again for 8 days following exposure to this personalized feedback. Independent tests identified significant activations within the prefrontal cortex in response to glucose feedback compared with behavioral feedback (Pbrain activation when compared with behavior. Participants reduced time spent sedentary at follow-up. Research on deploying behavioral and physiological feedback warrants further investigation. ©Maxine E Whelan, Paul S Morgan, Lauren B Sherar, Andrew P Kingsnorth, Daniele Magistro, Dale W Esliger. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 08.11.2017.

  10. Green Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  11. Green chemistry

    International Nuclear Information System (INIS)

    Warner, John C.; Cannon, Amy S.; Dye, Kevin M.

    2004-01-01

    A grand challenge facing government, industry, and academia in the relationship of our technological society to the environment is reinventing the use of materials. To address this challenge, collaboration from an interdisciplinary group of stakeholders will be necessary. Traditionally, the approach to risk management of materials and chemicals has been through inerventions intended to reduce exposure to materials that are hazardous to health and the environment. In 1990, the Pollution Prevention Act encouraged a new tact-elimination of hazards at the source. An emerging approach to this grand challenge seeks to embed the diverse set of environmental perspectives and interests in the everyday practice of the people most responsible for using and creating new materials--chemists. The approach, which has come to be known as Green Chemistry, intends to eliminate intrinsic hazard itself, rather than focusing on reducing risk by minimizing exposure. This chapter addresses the representation of downstream environmental stakeholder interests in the upstream everyday practice that is reinventing chemistry and its material inputs, products, and waste as described in the '12 Principles of Green Chemistry'

  12. 太阳能技术在“绿色凹宅”中的应用%Application of Solar Energy Technology in Green Concave House

    Institute of Scientific and Technical Information of China (English)

    莫理莉

    2014-01-01

    This paper introduced the application of solar energy technology in green concave house.The grid-connection photovoltaic power generation was used,which sent the redundant power back to the power network.The photovoltaic solar-thermal integrated solar panels provided the output of electricity and daily at the same time.The smart home system provided the comfortable environment for green concave house.The green concave house is a successful and low energy consumption example,which could provide references for the area of abundant solar energy and dispersal residence.%介绍了太阳能技术在“绿色凹宅”中的应用。采用的并网型太阳能光伏发电系统,当有余电时可回馈电网。铺设的光伏光热一体化太阳能板,在电力输出的同时提供生活热水。智能家居系统给“绿色凹宅”提供舒适的环境。“绿色凹宅”是一个比较成功的环保、低能耗的住宅实例,对太阳能资源丰富而又居住分散的地区有很好的借鉴意义。

  13. ACSEPT-Partitioning technologies and actinide science: Towards pilot facilities in Europe

    International Nuclear Information System (INIS)

    Bourg, S.; Hill, C.; Caravaca, C.; Rhodes, C.; Ekberg, C.; Taylor, R.; Geist, A.; Modolo, G.; Cassayre, L.; Malmbeck, R.; Harrison, M.; Angelis, G. de; Espartero, A.; Bouvet, S.; Ouvrier, N.

    2011-01-01

    deliver relevant flowsheets and recommendations to prepare for future demonstrations at a pilot level. After more than two years of work, significant progress was achieved in process development with the demonstration of the SANEX and innovative SANEX flowsheets. Chemical systems were selected for GANEX and are under study. In addition, efforts were made to increase collaborations, mutualise and homogenise procedures and share good practices. Based on these assessments, it is now time to look at the future challenges to overcome. A training and education program is implemented to share the knowledge among the partitioning community, present and future generations of researchers. Specific attention is paid to the funding of post-doctorate fellowships, two having been appointed respectively at the end of 2008 and at the end of 2009. Through this training and education programme, the first ACSEPT International Workshop was organised last March in Lisbon, Portugal. It gave an emphasis to young researchers' contributions (two thirds of the contributions) and allowed young scientists to meet and exchange with international recognised experts.

  14. Final report from VFL Technologies for the pilot-scale thermal treatment of Lower East Fork Poplar Creek floodplain soils. LEFPC appendices. Volume 6. Appendix VI-X

    International Nuclear Information System (INIS)

    1994-09-01

    This final report from VFL Technologies for the pilot-scale thermal treatment of lower East Fork Poplar Creek floodplain soils dated September 1994 contains LEFPC Appendices, Volume 6, Appendix VI - X. These appendices cover the following areas: chain of custody, miscellaneous process calculations (residence time and orifice plate calculations), waste management (mercury and radiation confirmatory testing before and after final verification run), health and safety (training, respirator fit test and radiation work permits), and transportation (soil receipt documentation)

  15. Application of remedy studies to the development of a soil washing pilot plant that uses mineral processing technology: a practical experience

    International Nuclear Information System (INIS)

    Richardson, W.S.; Phillips, C.R.; Hicks, R.; Luttrell, J.; Cox, C.

    1999-01-01

    Soil washing employing mineral processing technology to treat radionuclide-contaminated soils has been examined as a remedy alternative to the exclusive excavation, transportation, and disposal of the soil. Successful application depends on a thorough remedy study, employing a systematic tiered approach that is efficient, self-limiting, and cost effective. The study includes: (1) site and soil characterization to determine the basic mineral and physical properties of both the soil and contaminants and to identify their relative associations; (2) treatment studies to evaluate the performance of process units for contaminant separation; (3) conceptual process design to develop a treatment pilot plant; and (4) engineering design to construct, test, and optimize the actual full-scale plant. A pilot plant using soil washing technology for the treatment of radium-contaminated soil was developed, tested, and demonstrated. The plant used particle-size separation to produced a remediated product that represented approximately 50% of the contaminated soil. Subsequently, it was modified for more effective performance and application to soil with alternate characteristics; it awaits further testing. The economic analysis of soil washing using the pilot plant as a model indicates that a remedy plan based on mineral processing technology is very competitive with the traditional alternative employing excavation, transportation, and disposal exclusively, even when disposal costs are modest or when recovery of remediated soil during treatment is low. This paper reviews the tiered approach as it applies to mineral processing technology to treat radionuclide-contaminated soils and a pilot plant developed to test the soil washing process. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

  16. Pilot program on distance training in spirometry testing - the technology feasibility study.

    Science.gov (United States)

    Nowiński, Adam; Romański, Emil; Bieleń, Przemysław; Bednarek, Michał; Puścińska, Elżbieta; Goljan-Geremek, Anna; Pływaczewski, Robert; Śliwinski, Paweł

    2015-01-01

    Office spirometry has been widely used in recent years by general practitioners in primary care setting, thus the need for stricter monitoring of the quality of spirometry has been recognized. A spirometry counseling network of outpatients clinics was created in Poland using portable spirometer Spirotel. The spirometry data were transferred to counseling centre once a week. The tests sent to the counseling centre were analyzed by doctors experienced in the analysis of spirometric data. In justified cases they sent their remarks concerning performed tests to the centres via e-mail. We received 878 records of spirometry tests in total. Data transmission via the telephone was 100% effective. The quality of spirometry tests performed by outpatients clinics was variable. The use of spirometers with data transfer for training purposes seems to be advisable. There is a need to proper face-to-face training of spirometry operators before an implementation of any telemedicine technology.

  17. Teaching cardiopulmonary auscultation in workshops using a virtual patient simulation technology - A pilot study.

    Science.gov (United States)

    Pereira, D; Gomes, P; Faria, S; Cruz-Correia, R; Coimbra, M

    2016-08-01

    Auscultation is currently both a powerful screening tool, providing a cheap and quick initial assessment of a patient's clinical condition, and a hard skill to master. The teaching of auscultation in Universities is today reduced to an unsuitable number of hours. Virtual patient simulators can potentially mitigate this problem, by providing an interesting high-quality alternative to teaching with real patients or patient simulators. In this paper we evaluate the pedagogical impact of using a virtual patient simulation technology in a short workshop format for medical students, training them to detect cardiac pathologies. Results showed a significant improvement (+16%) in the differentiation between normal and pathological cases, although longer duration formats seem to be needed to accurately identify specific pathologies.

  18. Using information technology to reduce asthma disparities in underserved populations: a pilot study.

    Science.gov (United States)

    Vargas, Perla A; Robles, Elias; Harris, Judith; Radford, Peggy

    2010-10-01

    Low health literacy has been identified as an independent predictor of poor asthma control. The Institute of Medicine considers the role of information technology (IT) as critical in providing "safe, effective, patient centered, timely, efficient, and equitable" care with the potential to reduce health disparities in underserved populations. The aim of this study was to design and evaluate an interactive computer-based questionnaire to assess asthma symptoms in children of parents with limited health literacy and/or limited English proficiency. Volunteer caregivers attending a mobile asthma clinic were randomly assigned to complete the electronic or the paper-and-pencil version of an asthma screening questionnaire (ASQ) in their language of choice (English or Spanish). In the electronic version, a tablet computer was used to present the ASQ questions as video clips and to collect information through the touchscreen. Participants also completed a demographic questionnaire, a brief health literacy questionnaire, and a system usability and satisfaction questionnaire. Reliability of the paper and electronic self-assessments was evaluated by comparing each participant's answers to information they provided during a nurse-guided structured interview (gold standard). A total of 48 parents participated in the study, 26 completed the electronic ASQ and 21 the paper-and-pencil form. Thirty-five percent of the children had well-controlled asthma (n = 17). Most participants were Spanish speaking (67%) Hispanic (n = 44) mothers (n = 43) with a median age of 32 years. More than half had ≤8 years of education (n = 25) and earned education was significant (ρ = .47, p higher than concordance between the paper ASQ and the nurse interview (68% versus 54%; p technology tools may help reduce barriers to access due to inadequate levels of English proficiency and health literacy.

  19. A pilot exploratory investigation on pregnant women's views regarding STan fetal monitoring technology.

    Science.gov (United States)

    Bryson, Kate; Wilkinson, Chris; Kuah, Sabrina; Matthews, Geoff; Turnbull, Deborah

    2017-12-29

    Women's views are critical for informing the planning and delivery of maternity care services. ST segment analysis (STan) is a promising method to more accurately detect when unborn babies are at risk of brain damage or death during labour that is being trialled for the first time in Australia. This is the first study to examine women's views about STan monitoring in this context. Semi-structured interviews were conducted with pregnant women recruited across a range of clinical locations at the study hospital. The interviews included hypothetical scenarios to assess women's prospective views about STan monitoring (as an adjunct to cardiotocography, (CTG)) compared to the existing fetal monitoring method of CTG alone. This article describes findings from an inductive and descriptive thematic analysis. Most women preferred the existing fetal monitoring method compared to STan monitoring; women's decision-making was multifaceted. Analysis yielded four themes relating to women's views towards fetal monitoring in labour: a) risk and labour b) mobility in labour c) autonomy and choice in labour d) trust in maternity care providers. Findings suggest that women's views towards CTG and STan monitoring are multifaceted, and appear to be influenced by individual labour preferences and the information being received and understood. This underlies the importance of clear communication between maternity care providers and women about technology use in intrapartum care. This research is now being used to inform the implementation of the first properly powered Australian randomised trial comparing STan and CTG monitoring.

  20. Work, Stress, and Diurnal Bruxism: A Pilot Study among Information Technology Professionals in Bangalore City, India

    Directory of Open Access Journals (Sweden)

    S. K. Rao

    2011-01-01

    Full Text Available The study assessed the prevalence of diurnal bruxism among information technology (IT professionals and explored plausible predictors associated with the parafunctional habit. A cross-sectional study was designed and IT professionals were invited to participate. The inclusion criteria composed of participants in service for at least one year, having natural dentition, no history of cervical or facial injury and not undergoing orthodontic therapy. The participants (N=147 were interviewed by a trained interviewer to record information. A pre-tested questionnaire that included questions related to work, stress symptoms and diurnal bruxism was completed by each participant. The prevalence of self-reported diurnal bruxism was 59%. Bivariate analyses revealed that work (<0.05 and work experience (<0.05 were significantly associated with self-reported diurnal bruxism. In the binary logistic regression analysis stress (Odds Ratio [OR] =5.9, 95% Confidence Interval [CI] 2.6–13.3 was identified to be a strong predictor of diurnal bruxism. Professionals with 11 or more years of experience were less likely to report diurnal bruxism (OR=0.04, 95% CI 0.00–0.43 than those with 1 to 5 years of work experience. The study revealed that stress and less work experience were associated with diurnal bruxism among IT professionals in Bangalore city.

  1. Clinicians, security and information technology support services in practice settings--a pilot study.

    Science.gov (United States)

    Fernando, Juanita

    2010-01-01

    This case study of 9 information technology (IT) support staff in 3 Australian (Victoria) public hospitals juxtaposes their experiences at the user-level of eHealth security in the Natural Hospital Environment with that previously reported by 26 medical, nursing and allied healthcare clinicians. IT support responsibilities comprised the entire hospital, of which clinician eHealth security needs were only part. IT staff believed their support tasks were often fragmented while work responsibilities were hampered by resources shortages. They perceived clinicians as an ongoing security risk to private health information. By comparison clinicians believed IT staff would not adequately support the private and secure application of eHealth for patient care. Preliminary data analysis suggests the tension between these cohorts manifests as an eHealth environment where silos of clinical work are disconnected from silos of IT support work. The discipline-based silos hamper health privacy outcomes. Privacy and security policies, especially those influencing the audit process, will benefit by further research of this phenomenon.

  2. Large Pilot Scale Testing of Linde/BASF Post-Combustion CO2 Capture Technology at the Abbott Coal-Fired Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, Kevin C. [University of Illinois, Champaign, IL (United States)

    2017-08-18

    The work summarized in this report is the first step towards a project that will re-train and create jobs for personnel in the coal industry and continue regional economic development to benefit regions impacted by previous downturns. The larger project is aimed at capturing ~300 tons/day (272 metric tonnes/day) CO2 at a 90% capture rate from existing coal- fired boilers at the Abbott Power Plant on the campus of University of Illinois (UI). It will employ the Linde-BASF novel amine-based advanced CO2 capture technology, which has already shown the potential to be cost-effective, energy efficient and compact at the 0.5-1.5 MWe pilot scales. The overall objective of the project is to design and install a scaled-up system of nominal 15 MWe size, integrate it with the Abbott Power Plant flue gas, steam and other utility systems, and demonstrate the viability of continuous operation under realistic conditions with high efficiency and capacity. The project will also begin to build a workforce that understands how to operate and maintain the capture plants by including students from regional community colleges and universities in the operation and evaluation of the capture system. This project will also lay the groundwork for follow-on projects that pilot utilization of the captured CO2 from coal-fired power plants. The net impact will be to demonstrate a replicable means to (1) use a standardized procedure to evaluate power plants for their ability to be retrofitted with a pilot capture unit; (2) design and construct reliable capture systems based on the Linde-BASF technology; (3) operate and maintain these systems; (4) implement training programs with local community colleges and universities to establish a workforce to operate and maintain the systems; and (5) prepare to evaluate at the large pilot scale level various methods to utilize the resulting captured CO2. Towards the larger project goal, the UI-led team, together

  3. Green Tourism

    OpenAIRE

    Hasan, Ali

    2014-01-01

    Green tourism is defined as environmentally friendly tourism activities with various focuses and meanings. In a broad term, green tourism is about being an environmentally friendly tourist or providing environmentally friendly tourist services. The green tourism concept would be highly appealing to tourism enterprises and operators owing to increasing governmental pressure to improve environmental performance by adopting effective and tangible environmental management techniques. Green to...

  4. Metaphysical green

    OpenAIRE

    Earon, Ofri

    2011-01-01

    “Sensation of Green is about the mental process like touching, seeing, hearing, or smelling, resulting from the immediate stimulation of landscape forms, plants, trees, wind and water. Sensation of Green triggers a feeling of scale, cheerfulness, calmness and peace. The spatial performance of Sensation of Green is created by a physical interaction between the language of space and the language of nature” The notion of Sensation of Green was developed through a previous study ‘Learning from th...

  5. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ``Pneumatic Excavator`` which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions.

  6. Assessment of technologies for hazardous waste site remediation: Non-treatment technologies and pilot scale facility implementation -- excavation -- storage technology -- safety analysis and review statement

    International Nuclear Information System (INIS)

    Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

    1994-02-01

    The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approach was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ''Pneumatic Excavator'' which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions

  7. Pilot Study of a New Nonradioactive Surgical Guidance Technology for Locating Nonpalpable Breast Lesions.

    Science.gov (United States)

    Cox, Charles E; Garcia-Henriquez, Norbert; Glancy, M Jordan; Whitworth, Pat; Cox, John M; Themar-Geck, Melissa; Prati, Ronald; Jung, Michelle; Russell, Scott; Appleton, Kristie; King, Jeff; Shivers, Steven C

    2016-06-01

    The current technique for locating nonpalpable breast lesions is wire localization (WL). Radioactive seed localization and intraoperative ultrasound were developed to improve difficulties with WL. The SAVI SCOUT surgical guidance system was developed to improve these methods. The SCOUT system is a non-radioactive, FDA-cleared medical device that uses electromagnetic wave technology to provide real-time guidance during excisional breast procedures. Consenting patients underwent localization and excision using an implantable electromagnetic wave reflective device (reflector) and a detector handpiece with a console. Using image guidance, the reflector was placed up to 7 days before the surgical procedure. The primary end points of the study were successful reflector placement, localization, and retrieval. The secondary end points were percentage of clear margins, reexcision rates, days of placement before excision, and physician comparison with WL. This study analyzed 50 patients. The reflectors were placed under mammographic guidance (n = 18, 36 %) or ultrasound guidance (n = 32, 64 %). Of the 50 patients, 10 (20 %) underwent excisional biopsy and 40 (80 %) had a lumpectomy. The lesion and reflector were successfully removed in all 50 patients, and no adverse events occurred. Of the 41 patients who had in situ and/or invasive carcinoma identified, 38 (93 %) had clear margins and 3 (7 %) were recommended for reexcision. These data suggest that the SCOUT system is safe and effective for guiding the excision of nonpalpable breast lesions and a viable alternative to standard localization options. A larger prospective, multi-institution trial of SCOUT currently is underway to validate these findings.

  8. JV Task 107- Pilot-Scale Emission Control Technology Testing for Constellation Energy

    Energy Technology Data Exchange (ETDEWEB)

    Michael Jones; Brandon Pavlish; Stephen Sollom; John Kay

    2007-06-30

    An Indonesian, Colombian, and Russian coal were tested in the Energy & Environmental Research Center's combustion test facility for their performance and an evaluation of mercury release and capture with selected additives in both electrostatic precipitator and baghouse configurations. Sorbents included the carbon-based materials NORIT DARCO Hg, Sorbent Technologies B-PAC and B-PAC LC, STI Rejects provided by Constellation Energy, and Envergex e-Sorb, along with ChemMod's high-temperature additive. Each coal was evaluated over several days and compared. Ash-fouling tests were conducted, and mercury levels were monitored using continuous mercury monitors (CMMs). The Ontario Hydro mercury sampling method was also utilized. The Indonesian coal had the lowest ash content, lowest sulfur content, and lowest energy content of the three coals tested. The Colombian coal had the highest mercury content and did contain a significant level of selenium which can interfere with the ability of a CMM to monitor mercury in the gas stream. All sorbents displayed very favorable results. In most cases, mercury removal greater than 86% could be obtained. The Indonesian coal displayed the best mercury removal with sorbent addition. A maximum removal of 97% was measured with this coal using Envergex's carbon-based sorbent at a rate of 4 lb/Macf across an electrostatic precipitator. The high ash and selenium content of the Colombian coal caused it to be a problematic fuel, and ash plugging of the test furnace was a real concern. Problems with the baghouse module led to limited testing. Results indicated that native capture across the baghouse for each coal type was significant enough not to warrant sorbent addition necessary. The fouling potential was the lowest for the Indonesian coal. Low sulfur content contributes to the poor potential for fouling, as witnessed by the lack of deposits during testing. The Russian and Colombian coals had a much higher potential for fouling

  9. Piloting a new approach: making use of technology to present a distance learning computer science course

    Directory of Open Access Journals (Sweden)

    Tina Wilson

    1996-12-01

    Full Text Available Teaching projects which make use of new technology are becoming of interest to all academic institutions in the UK due to economic pressure to increase student numbers. CMC (Computer- Mediated Communication such as computer conferencing appears an attractive solution to higher education's 'numbers' problem, with the added benefit that it is free from time and place constraints. Researchers have discussed CMC from a number of different perspectives, for example Mason and Kaye (1989 describe a CMC system as a system of interactivity between tutors, students, resources and organizational structure. Steeples et al (1993 consider CMC in terms of group cohesion, modes of discourse and intervention strategies to stimulate and structure participation. Goodyear et al (1994 discuss the Just in Time (TT-Based Open Learning (JTTOL model in terms of a set of educational beliefs, role definitions, working methods and learning resources, together with a definition of infrastructure requirements for CMC. Shedletsky (1993 suggests that a CMC should be viewed in terms of an 'intrapersonal communication' model, while Mayes et al (1994 identify three types of learning which is mediated by telematics, that is, learning by conceptualization, construction and dialogue. Other researchers, such as Velayo (1994, describe the teacher as 'an active agent', and present a model for computer conferencing which neglects the social aspect of CMC, while Berge (1995 mentions the importance of social activity between students and the importance of the role of the moderator. From these accounts, there appear to be a number of dimensions which can be used to evaluate CMC. Not all researchers emphasize the same dimensions; however, this paper proposes that computer conferencing systems should be designed to encourage students to participate in all three of the following dimensions. These can be summarized as: (a a knowledge dimension (includes domain and meta knowledge; (b a social

  10. Binaural beat technology in humans: a pilot study to assess neuropsychologic, physiologic, and electroencephalographic effects.

    Science.gov (United States)

    Wahbeh, Helané; Calabrese, Carlo; Zwickey, Heather; Zajdel, Dan

    2007-03-01

    When two auditory stimuli of different frequency are presented to each ear, binaural beats are perceived by the listener. The binaural beat frequency is equal to the difference between the frequencies applied to each ear. Our primary objective was to assess whether steady-state entrainment of electroencephalographic activity to the binaural beat occurs when exposed to a specific binaural beat frequency as has been hypothesized. Our secondary objective was to gather preliminary data on neuropsychologic and physiologic effects of binaural beat technology. A randomized, blinded, placebo-controlled crossover experiment in 4 healthy adult subjects. Subjects were randomized to experimental auditory stimulus of 30 minutes of binaural beat at 7 Hz (carrier frequencies: 133 Hz L; 140 Hz R) with an overlay of pink noise resembling the sound of rain on one session and control stimuli of the same overlay without the binaural beat carrier frequencies on the other session. Data were collected during two separate sessions 1 week apart. Neuropsychologic and blood pressure data were collected before and after the intervention; electroencephalographic data were collected before, during, and after listening to either binaural beats or control. Neuropsychologic measures included State Trait Anxiety Inventory, Profile of Mood States, Rey Auditory Verbal List Test, Stroop Test, and Controlled Oral Word Association Test. Spectral and coherence analysis was performed on the electroencephalogram (EEG), and all measures were analyzed for changes between sessions with and without binaural beat stimuli. There were no significant differences between the experimental and control conditions in any of the EEG measures. There was an increase of the Profile of Mood States depression subscale in the experimental condition relative to the control condition (p = 0.02). There was also a significant decrease in immediate verbal memory recall (p = 0.03) in the experimental condition compared to control

  11. Are Green Vehicles Worth the Extra Cost? The Case of Diesel-Electric Hybrid Technology for Urban Delivery Vehicles

    Science.gov (United States)

    Krutilla, Kerry; Graham, John D.

    2012-01-01

    A central question for environmental policy is whether the long-term benefits of energy-saving technologies are sufficient to justify their short-term costs, and if so, whether financial incentives are needed to stimulate adoption. The fiscal effects of incentivizing new technologies, and the revenue effects of using the technology, are also…

  12. Transfer of Escherichia coli O157:H7 from equipment surfaces to fresh-cut leafy greens during processing in a model pilot-plant production line with sanitizer-free water.

    Science.gov (United States)

    Buchholz, Annemarie L; Davidson, Gordon R; Marks, Bradley P; Todd, Ewen C D; Ryser, Elliot T

    2012-11-01

    Escherichia coli O157:H7 contamination of fresh-cut leafy greens has become a public health concern as a result of several large outbreaks. The goal of this study was to generate baseline data for E. coli O157:H7 transfer from product-inoculated equipment surfaces to uninoculated lettuce during pilot-scale processing without a sanitizer. Uninoculated cored heads of iceberg and romaine lettuce (22.7 kg) were processed using a commercial shredder, step conveyor, 3.3-m flume tank with sanitizer-free tap water, shaker table, and centrifugal dryer, followed by 22.7 kg of product that had been dip inoculated to contain ∼10(6), 10(4), or 10(2) CFU/g of a four-strain avirulent, green fluorescent protein-labeled, ampicillin-resistant E. coli O157:H7 cocktail. After draining the flume tank and refilling the holding tank with tap water, 90.8 kg of uninoculated product was similarly processed and collected in ∼5-kg aliquots. After processing, 42 equipment surface samples and 46 iceberg or 36 romaine lettuce samples (25 g each) from the collection baskets were quantitatively examined for E. coli O157:H7 by direct plating or membrane filtration using tryptic soy agar containing 0.6% yeast extract and 100 ppm of ampicillin. Initially, the greatest E. coli O157:H7 transfer was seen from inoculated lettuce to the shredder and conveyor belt, with all equipment surface populations decreasing 90 to 99% after processing 90.8 kg of uncontaminated product. After processing lettuce containing 10(6) or 10(4) E. coli O157:H7 CFU/g followed by uninoculated lettuce, E. coli O157:H7 was quantifiable throughout the entire 90.8 kg of product. At an inoculation level of 10(2) CFU/g, E. coli O157:H7 was consistently detected in the first 21.2 kg of previously uninoculated lettuce at 2 to 3 log CFU/100 g and transferred to 78 kg of product. These baseline E. coli O157:H7 transfer results will help determine the degree of sanitizer efficacy required to better ensure the safety of fresh-cut leafy

  13. Effectiveness of virtual reality using Wii gaming technology in stroke rehabilitation: a pilot randomized clinical trial and proof of principle.

    Science.gov (United States)

    Saposnik, Gustavo; Teasell, Robert; Mamdani, Muhammad; Hall, Judith; McIlroy, William; Cheung, Donna; Thorpe, Kevin E; Cohen, Leonardo G; Bayley, Mark

    2010-07-01

    Hemiparesis resulting in functional limitation of an upper extremity is common among stroke survivors. Although existing evidence suggests that increasing intensity of stroke rehabilitation therapy results in better motor recovery, limited evidence is available on the efficacy of virtual reality for stroke rehabilitation. In this pilot, randomized, single-blinded clinical trial with 2 parallel groups involving stroke patients within 2 months, we compared the feasibility, safety, and efficacy of virtual reality using the Nintendo Wii gaming system (VRWii) versus recreational therapy (playing cards, bingo, or "Jenga") among those receiving standard rehabilitation to evaluate arm motor improvement. The primary feasibility outcome was the total time receiving the intervention. The primary safety outcome was the proportion of patients experiencing intervention-related adverse events during the study period. Efficacy, a secondary outcome measure, was evaluated with the Wolf Motor Function Test, Box and Block Test, and Stroke Impact Scale at 4 weeks after intervention. Overall, 22 of 110 (20%) of screened patients were randomized. The mean age (range) was 61.3 (41 to 83) years. Two participants dropped out after a training session. The interventions were successfully delivered in 9 of 10 participants in the VRWii and 8 of 10 in the recreational therapy arm. The mean total session time was 388 minutes in the recreational therapy group compared with 364 minutes in the VRWii group (P=0.75). There were no serious adverse events in any group. Relative to the recreational therapy group, participants in the VRWii arm had a significant improvement in mean motor function of 7 seconds (Wolf Motor Function Test, 7.4 seconds; 95% CI, -14.5, -0.2) after adjustment for age, baseline functional status (Wolf Motor Function Test), and stroke severity. VRWii gaming technology represents a safe, feasible, and potentially effective alternative to facilitate rehabilitation therapy and promote

  14. Empowerment of diabetic patients through mHealth technologies and education: development of a pilot self-management application

    Science.gov (United States)

    Gustin, G.; Macq, B.; Gruson, D.; Kieffer, S.

    2017-11-01

    Diabetes is a major, global and increasing condition that occurs when the insulin-glucagon regulatory mechanism is affected, leading to uncontrolled hyper- and hypoglycaemia events that may be life-threatening. However, it has been shown that through daily monitoring, appropriate patient-specific empowerment, lifestyle behavior of diabetics can be positively influenced and the associated and costly diabetes complications significantly reduced. As personal face-to-face coaching is costly and hard to scale, mobile applications and services have now become a key driver of mobile Health (mHealth) deployment, especially as a helpful way for self-management. Despite the huge mHealth market, a major limitation of many diabetes apps is that they do not use inputted data to help patients determine their daily insulin doses. On the other hand, the majority of existing insulin dose calculator apps provide no protection against - or even may actively contribute to - incorrect or inappropriate dose recommendations that put users at risk. Besides, there is clear evidence that lack of education on insulinotherapy and carbohydrate counting is associated with higher blood glucose variability with type 1 diabetes. Hence, there is a need for an accurate modelling of glucose-insulin dynamics together as well as providing adequate educational support. The aims of this paper are: a) to highlight the usefulness of mHealth technologies in chronic disease management; b) to describe and discuss the development of an insulin bolus calculator integrated into a pilot mHealth app; c) to underline the importance of diabetes self-management education.

  15. Improving education and supervision of Queensland X-ray Operators through video conference technology: A teleradiography pilot project.

    Science.gov (United States)

    Rawle, Marnie; Oliver, Tanya; Pighills, Alison; Lindsay, Daniel

    2017-12-01

    X-ray Operator (XO) supervision in Queensland is performed by radiographers in a site removed from the XO site. This has historically been performed by telephone when the XO requires immediate help, as well as post-examination through radiographer review and the provision of written feedback on images produced. This project aimed to improve image quality through the provision of real-time support of XOs by the introduction of video conference (VC) supervision. A 6-month pilot project compared image quality with and without VC supervision. VC equipment was installed in the X-ray room at two rural sites, as well as at the radiographer site, to enable visual and oral supervision. The VC unit enabled visualisation of the X-ray examination technique as it was being undertaken, as well as the images produced prior to transmission to the Picture Archiving and Communication System (PACS). Statistically significant improvement in image quality criteria measures were seen for patient positioning (P = 0.008), image quality (P < 0.001) and diagnostic value (P < 0.001) of images taken during this project. No statistically significant differences were seen during case level assessment in the inclusion of only appropriate imaging (P = 0.06), and the inclusion of unacceptable imaging (P = 0.06), however improvements were seen in both of these criteria. The survey revealed 24.6% of examinations performed would normally have involved the XO contacting the radiographer for assistance, although, assistance was actually provided in 88.3% of examinations. This project has demonstrated that significant improvement in image quality is achievable with VC supervision. A larger study with a control arm that did not receive direct supervision should be used to validate the findings of this study. © 2017 The Authors. Journal of Medical Radiation Sciences published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Medical Imaging and Radiation Therapy and New Zealand

  16. Product management in green markets

    Directory of Open Access Journals (Sweden)

    Čajka Zoran

    2005-01-01

    Full Text Available The present paper deals with the concept of green product management. To create a significantly greener economy, there will need to be a range of new and greener products and technologies. Today we are faced with a growth in more innovative "clean technology" solutions. Successful development of new green products requires high levels of communication and integration, good information, early consideration of green issues, support from top management, and benchmarking. The set of controllable tactical marketing tools (product, price, place and promotion that the company blends to produce the response it wants in the target green market, is the matter of the primary importance to the management.

  17. Metaphysical green

    DEFF Research Database (Denmark)

    Earon, Ofri

    2011-01-01

    example is a tiny Danish summer house from 1918 . The second example is ‘House before House’ , in Tokyo. The third example is a prefabricated house ‘CHU’ . The analysis evaluates the characteristics of diverse tones of green – from green image to green sensation. The analysis is based on the original...... of Sensation of Green is created by a physical interaction between the language of space and the language of nature” The notion of Sensation of Green was developed through a previous study ‘Learning from the Summer House’ investigating the unique architectural characteristics of the Danish summer houses...... the Sensation of Green? Three existing examples are agents to this discussion. The first example is a Danish summer house. The other two are international urban examples. While the summer house articulates the original meaning of Sensation of Green, the urban examples illustrate its urban context. The first...

  18. Fly-ash and Green liquor as binder in gravel road stabilization. Pilot study at Iggesund; Flygaska-Groenlutslamstabiliserad skogsbilvaeg. Fallstudie Iggesund

    Energy Technology Data Exchange (ETDEWEB)

    Macsik, Josef; Erlandsson, Aasa; Wexell, Bengt-Arne

    2009-03-15

    The quality of gravel roads is of importance for public and the forestry industry. Frost damages lead to the closure of roads due to reduced bearing capacity, settlements and tracks made by wheel. Lately these frost damages have worsened due to milder winter temperatures. The need to improve the quality of these roads and to minimize the periods when the roads are closed is ever increasing. Several Swedish and Finnish projects have shown that rest materials from the paper industry can improve bearing capacity of roads. Both green liquor and fly ash was used successfully in an earlier project as pelletized mineral nutrient in forest soil. In this project fly ash and green liquor from Iggesund Paperboard was used as a binder during stabilization of a gravel road. The aim was to improve bearing capacity of a gravel road, mainly during the thawing period. The target group of the project was local road associations, forestry industry, which have a need to improve road quality, the paper industry which produce suitable rest materials and local environmental agencies. During an initial laboratory investigation proper binder recipe, based on fly ash, green liquor and cement was chosen. The laboratory investigation and earlier studies indicate in order to increase resistance to frost damage cement should be included in the binder. The aim was to stabilize ballast and improve the stabilized road materials shear strength, frost susceptibility. Total elemental content and Leachability was also investigated. Based on the results the local environmental agency was notified. During spring of 2008 two road sections, about 2 km was stabilized. The stabilized road was investigated during autumn 2008 regarding bearing capacity and environmental impact. The stabilization of the road section was estimated to cause minor impact on the recipient. The local environmental agency approved the stabilization of the road section, however increased the follow up effort with more analyses

  19. Retrofitting impervious urban infrastructure with green technology for rainfall-runoff restoration, indirect reuse and pollution load reduction

    International Nuclear Information System (INIS)

    Sansalone, John; Raje, Saurabh; Kertesz, Ruben; Maccarone, Kerrilynn; Seltzer, Karl; Siminari, Michele; Simms, Peter; Wood, Brandon

    2013-01-01

    The built environs alter hydrology and water resource chemistry. Florida is subject to nutrient criteria and is promulgating “no-net-load-increase” criteria for runoff and constituents (nutrients and particulate matter, PM). With such criteria, green infrastructure, hydrologic restoration, indirect reuse and source control are potential design solutions. The study simulates runoff and constituent load control through urban source area re-design to provide long-term “no-net-load-increases”. A long-term continuous simulation of pre- and post-development response for an existing surface parking facility is quantified. Retrofits include a biofiltration area reactor (BAR) for hydrologic and denitrification control. A linear infiltration reactor (LIR) of cementitious permeable pavement (CPP) provides infiltration, adsorption and filtration. Pavement cleaning provided source control. Simulation of climate and source area data indicates re-design achieves “no-net-load-increases” at lower costs compared to standard construction. The retrofit system yields lower cost per nutrient load treated compared to Best Management Practices (BMPs). -- Continuous simulation of climate and site data demonstrate that urban re-design using green infrastructure can provide long-term “no-net-load-increases” at a lower costs compared to BMPs

  20. Summary of the achievements in fiscal 1991 in developing the coal liquefaction technology and the bituminous coal liquefaction technology. Studies by using a pilot plant; 1991 nendo sekitan ekika gijutsu kaihatsu rekiseitan ekika gijutsu no kaihatsu seika gaiyo. Pilot plant ni yoru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-08-01

    This paper describes the achievements in 1991 on studies on the bituminous coal liquefaction technology using a pilot plant. Based on the detailed design of the 150-t/d pilot plant, study problems and analysis items were reviewed, and a material balance acquiring method and a reaction column data analyzing method were discussed. Utilization of the liquefaction simulator was attempted. Efficient execution of the pilot plant operation study requires to have the basic and support study achievements reflected on the pilot plant operation, and clarify the roles to be played by the groups. Therefore, discussion items were compiled. The overall process plan for the design and construction was reviewed based on the plan discussed in fiscal 1990. Fiscal 1991 has launched common civil engineering constructions. The operation plans for the main four facilities in the pilot plant, which have been prepared in fiscal 1988, were continued of reviewing to cope with the situation of the decreased construction budget. The budget was reviewed again in fiscal 1991, which would present a prospect of starting the operation in fiscal 1995. Annual reviews on the basic operation plans for the main four facilities and the conceptions taken to date were put into order. The project management system was also expanded and re-arranged, including the information registration and retrieval system. (NEDO)

  1. Histochemical detection and comparison of apoptotic cells in the gingival epithelium using hematoxylin and eosin and methyl green-pyronin: A pilot study.

    Science.gov (United States)

    Nayak, Aarati; Raikar, Anita; Kotrashetti, Vijaylaxmi; Nayak, Ramakant; Shree, Sumedha; Kambali, Soumya

    2016-01-01

    Apoptosis plays a critical role in the regulation of inflammation and host immune response. It helps in tissue homeostasis and a disturbance in this is often associated with disease. The use of histochemical stains like hematoxylin and eosin (H and E) and methyl green-pyronin (MGP) can provide a simple and cost-effective method for the detection of apoptotic cells. Study intended to analyze the expression of apoptosis in the gingival epithelium of healthy subjects and in patients with chronic periodontitis, using H and E and MGP. It is also proposed to correlate the apoptotic index (AI) of healthy individuals and those with chronic periodontitis. Twenty gingival biopsies were harvested from which ten samples were of healthy subjects and ten subjects who suffered from chronic periodontitis. Apoptotic cells were analyzed using MGP and H and E under light microscopy. Apoptotic cells were identified at ×100 magnification and AI was calculated. Apoptotic cells were easily distinguishable in MGP stained sections when compared to those stained using H and E. Moreover, apoptotic cell count was higher in chronic periodontitis. Statistical analyses were done by Tukey's multiple post hoc procedure. The study reveals that MGP staining can be used in a routine basic laboratory set up as one of the cost-effective methods for the detection of apoptotic cells.

  2. Histochemical detection and comparison of apoptotic cells in the gingival epithelium using hematoxylin and eosin and methyl green-pyronin: A pilot study

    Directory of Open Access Journals (Sweden)

    Aarati Nayak

    2016-01-01

    Full Text Available Background: Apoptosis plays a critical role in the regulation of inflammation and host immune response. It helps in tissue homeostasis and a disturbance in this is often associated with disease. The use of histochemical stains like hematoxylin and eosin (H and E and methyl green-pyronin (MGP can provide a simple and cost-effective method for the detection of apoptotic cells. Aim: Study intended to analyze the expression of apoptosis in the gingival epithelium of healthy subjects and in patients with chronic periodontitis, using H and E and MGP. It is also proposed to correlate the apoptotic index (AI of healthy individuals and those with chronic periodontitis. Materials and Methods: Twenty gingival biopsies were harvested from which ten samples were of healthy subjects and ten subjects who suffered from chronic periodontitis. Apoptotic cells were analyzed using MGP and H and E under light microscopy. Results: Apoptotic cells were identified at ×100 magnification and AI was calculated. Apoptotic cells were easily distinguishable in MGP stained sections when compared to those stained using H and E. Moreover, apoptotic cell count was higher in chronic periodontitis. Statistical analyses were done by Tukey's multiple post hoc procedure. Conclusion: The study reveals that MGP staining can be used in a routine basic laboratory set up as one of the cost-effective methods for the detection of apoptotic cells.

  3. 上海地区绿色建筑中光伏系统应用分析%Application of Photovoltaic Technology in Green Buildings in Shanghai

    Institute of Scientific and Technical Information of China (English)

    胡一东; 谭洪卫

    2017-01-01

    光伏发电作为未来最具潜力的可再生能源之一,在绿色建筑中的应用较少,对其现状问题与发展潜力尚缺乏系统深入的调研、分析与评价.通过对2008—2014年上海地区绿色建筑案例进行调研,梳理和分析了光伏技术在绿色建筑中的应用状况,探讨了建筑中光伏发电的技术适应性、经济性及替代率等问题,为光伏技术的推广应用提供参考.%China has been the first biggest photovoltaic market in the world, which has surpassed Germany now. Photovoltaic power is regarded as one of the most promising renewable energy in the future, but it is not widely applied in green buildings. Solar radiation conditions, building adaptability and economy are the most critical factors that affect the popularization and application of photovoltaic technology. The potential and benefit of photovoltaic building are evaluated, as well as the building adaptation and economy, which meet sustainable development of green building. But it is still lack of systematic and in-depth research, analysis and evaluation on status problems and development potential of photovoltaic technology. In this work, application status of photovoltaic technology is analyzed by surveying cases related to green buildings in Shanghai from 2008 to 2014 . The adaptability in different buildings and economy in different periods of photovoltaic technology are also discussed. The results show that firstly green buildings in Shanghai have been developed fast during 2008-2014 , but the photovoltaic technology' s application ratio in green buildings is relatively lower. Secondly, photovoltaic technology is most widely used in public buildings and partly applied in residence, accounted for 10. 71%, and no application cases in the industrial buildings even. From the perspective of building function, photovoltaic technology is mainly concentrated in the office building accounted for 71. 4%, followed by the exhibition hall and residence

  4. Harvard University: Green Loan Fund. Green Revolving Funds in Action: Case Study Series

    Science.gov (United States)

    Foley, Robert

    2011-01-01

    The Green Loan Fund at Harvard University has been an active source of capital for energy efficiency and waste reduction projects for almost a decade. This case study examines the revolving fund's history from its inception as a pilot project in the 1990s to its regeneration in the early 2000s to its current operations today. The green revolving…

  5. Effects of rye bread enriched with green tea extract on weight maintenance and the characteristics of metabolic syndrome following weight loss: a pilot study.

    Science.gov (United States)

    Bajerska, Joanna; Mildner-Szkudlarz, Sylwia; Walkowiak, Jarosław

    2015-06-01

    We examined whether the incorporation of green tea extract enriched rye bread (GTRB) into the diet can improve weight loss (WL) maintenance and control of abnormalities linked to metabolic syndrome (MS). A total of 55 obese men and women (mean age: 53.0±7.0 years, body mass index: 35.0±5.5 kg m(-2)) were recruited. The study had a single-blind randomized study design and consisted of an 8-week WL phase with low-energy calorie diet, followed by a 12-week weight maintenance (WM) phase. During the WM phase, the subjects were randomized into two groups, receiving either the control rye bread (control group) or the GTRB (intervention group). The ingestion of 280 and 360 g GTRB provided daily totals of 123.2 and 158.4 mg caffeine, and 188.3 and 242.1 mg of epigallocatechin gallate, for women and men, respectively. After the WL phase, subjects lost 7.3±3.1 kg of their baseline body weight. GTRB intake did not significantly influence the maintenance of WL, high-density lipoprotein-cholesterol, triglycerides, and glucose concentrations. Although, it resulted in significant differences (mean difference [95% confidence interval]) between the treatment groups in the maintenance of waist circumference (-1.22 cm [-2.4, -0.02; P=.04]), the results were not clinically meaningful. Nevertheless, the ingestion of GTRB led to the maintenance of lower blood pressure (BP), also the proportion of subjects fulfilling the criteria of MS after the WM phase was lower in the intervention group than in the control group. Although GTRB consumption did not improve significantly the WL maintenance, it resulted in a better control of BP.

  6. Near-infrared fluorescence cholangiography with indocyanine green for biliary atresia. Real-time imaging during the Kasai procedure: a pilot study.

    Science.gov (United States)

    Hirayama, Yutaka; Iinuma, Yasushi; Yokoyama, Naoyuki; Otani, Tetsuya; Masui, Daisuke; Komatsuzaki, Naoko; Higashidate, Naruki; Tsuruhisa, Shiori; Iida, Hisataka; Nakaya, Kengo; Naito, Shinichi; Nitta, Koju; Yagi, Minoru

    2015-12-01

    Hepatoportoenterostomy (HPE) with the Kasai procedure is the treatment of choice for biliary atresia (BA) as the initial surgery. However, the appropriate level of dissection level of the fibrous cone (FC) of the porta hepatis (PH) is frequently unclear, and the procedure sometimes results in unsuccessful outcomes. Recently, indocyanine green near-infrared fluorescence imaging (ICG-FCG) has been developed as a form of real-time cholangiography. We applied this technique in five patients with BA to visualize the biliary flow at the PH intraoperatively. ICG was injected intravenously the day before surgery as the liver function test, and the liver was observed with a near-infrared camera system during the operation while the patient's feces was also observed. In all patients, the whole liver fluoresced diffusely with ICG-containing stagnant bile, whereas no extrahepatic structures fluoresced. The findings of the ICG fluorescence pattern of the PH after dissection of the FC were classified into three types: spotty fluorescence, one patient; diffuse weak fluorescence, three patients; and diffuse strong fluorescence, one patient. In all five patients, the feces evacuated after HPE showed distinct fluorescent spots, although that obtained before surgery showed no fluorescence. One patient with diffuse strong fluorescence who did not achieve JF underwent living related liver transplantation six months after the initial HPE procedure. Four patients, including three cases involving diffuse weak fluorescence and one case involving spotty fluorescence showed weak fluorescence compared to that of the surrounding liver surface. We were able to detect the presence of bile excretion at the time of HPE intraoperatively and successfully evaluated the extent of bile excretion using this new technique. Furthermore, the ICG-FCG findings may provide information leading to a new classification and potentially function as an indicator predicting the clinical outcomes after HPE.

  7. Green Chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Collison, Melanie

    2011-05-15

    Green chemistry is the science of chemistry used in a way that will not use or create hazardous substances. Dr. Rui Resendes is working in this field at GreenCentre Canada, an offshoot of PARTEQ Innovations in Kingston, Ontario. GreenCentre's preliminary findings suggest their licensed product {sup S}witchable Solutions{sup ,} featuring 3 classes of solvents and a surfactant, may be useful in bitumen oil sands extraction.

  8. Green roofs

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-04-01

    Full Text Available , beetles and spiders); and the number of birds that nest in vegetated roofs (including kestrels, swallows, and wagtails). Objective The primary objective of a green roof is to create a living habitat in an otherwise barren environment, hence the use... the negative environmental impacts including plant and insect specie loss. Thus at a philosophical level green roofs support the notion “replace what you displace”. Key ecological issues that can be addressed through green roofs include: Negative effects...

  9. The Use of Fluorescence Technology versus Visual and Tactile Examination in the Detection of Oral Lesions: A Pilot Study.

    Science.gov (United States)

    Ayoub, Hadeel M; Newcomb, Tara L; McCombs, Gayle B; Bonnie, Marshall

    2015-02-01

    This study compared the effectiveness of the VELscope® Vx versus visual and tactile intraoral examination in detecting oral lesions in an adult, high risk population. The pilot study compared the intra oral findings between 2 examination types. The sample was comprised of 30 participants who were addicted to either cigarettes or a dual addiction (cigarettes plus hookah). High risk population was defined as males who were current cigarette smokers or had a dual addiction. Two trained and experienced licensed dental hygienists conducted all examinations. Throughout the study, all visual and tactile intraoral examinations were conducted first by one dental hygienist first, followed by the VELscope® Vx fluorescence examinations by the second dental hygienist. All subjects received an inspection of the lips, labial and buccal mucosa, floor of the mouth, dorsal, ventral and lateral sides of the tongue, hard and soft palate, and visual inspection of the oropharynx and uvula. Both evaluations took place in 1 visit in the Dental Hygiene Research Center at Old Dominion University and external sites. All participants received oral cancer screening information, recommendations, referrals for tobacco cessation programs and brochures on the 2 types of examinations conducted. Participants were considered high risk based on demographics (current smokers and mostly males). Neither visual and tactile intraoral examination nor the VELscope® Vx examination showed positive lesions. No lesions were detected; therefore, no referrals were made. Data indicated the duration of tobacco use was significantly higher in cigarette smokers (14.1 years) than dual addiction smokers (5 years) (p>0.005). The average numbers of cigarettes smoked per day were 13.5 compared to 14.2 cigarettes for dual addiction smokers. Results from this study suggest the visual and tactile intraoral examination produced comparative results to the VELscope® Vx examination. Findings from this study support that the

  10. Different I/O Standard and Technology Based Thermal Aware Energy Efficient Vedic Multiplier Design for Green Wireless Communication on FPGA

    DEFF Research Database (Denmark)

    Goswami, Kavita; Pandey, Bishwajeet; Kumar, Tanesh

    2017-01-01

    and that eventually decrease power dissipation of wireless communications systems. In order to study the effect of different process technology (40, 65, 90 nm) on our design, a novel design is implemented on 40, 65 and 90 nm based FPGA. In this work, we are integrating thermal aware design approach for energy......This paper deals with low power multiplier design that plays a significant role in green wireless communications systems. Over the period of time, researchers have proposed various multiplier designs in order to get high speed. Vedic multiplier is considered as one of the low power multiplier along...... with high speed as compared with traditional array and booth multipliers. Vedic Multiplier contains a total of sixteen algorithms/sutras for predominantly logical operations. This research focuses on thermal aspects and energy efficiency of wireless communications systems with the thermal aware low power...

  11. Catalysis and sustainable (green) chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Centi, Gabriele; Perathoner, Siglinda [Dipartimento di Chimica Industriale ed Ingegneria dei Materiali, University of Messina, Salita Sperone 31, 98166 Messina (Italy)

    2003-01-15

    Catalysis is a key technology to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and a brief assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry is discussed and illustrated via an analysis of some selected and relevant examples. Emphasis is also given to the concept of catalytic technologies for scaling-down chemical processes, in order to develop sustainable production processes which reduce the impact on the environment to an acceptable level that allows self-depuration processes of the living environment.

  12. Can teamwork and situational awareness (SA) in ED resuscitations be improved with a technological cognitive aid? Design and a pilot study of a team situation display.

    Science.gov (United States)

    Parush, A; Mastoras, G; Bhandari, A; Momtahan, K; Day, K; Weitzman, B; Sohmer, B; Cwinn, A; Hamstra, S J; Calder, L

    2017-12-01

    Effective teamwork in ED resuscitations, including information sharing and situational awareness, could be degraded. Technological cognitive aids can facilitate effective teamwork. This study focused on the design of an ED situation display and pilot test its influence on teamwork and situational awareness during simulated resuscitation scenarios. The display design consisted of a central area showing the critical dynamic parameters of the interventions with an events time-line below it. Static information was placed at the sides of the display. We pilot tested whether the situation display could lead to higher scores on the Clinical Teamwork Scale (CTS), improved scores on a context-specific Situational Awareness Global Assessment Technique (SAGAT) tool, and team communication patterns that reflect teamwork and situational awareness. Resuscitation teamwork, as measured by the CTS, was overall better with the presence of the situation display as compared with no situation display. Team members discussed interventions more with the situation display compared with not having the situation display. Situational awareness was better with the situation display only in the trauma scenario. The situation display could be more effective for certain ED team members and in certain cases. Overall, this pilot study implies that a situation display could facilitate better teamwork and team communication in the resuscitation event. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Consumers’ attitudes towards green food in China

    DEFF Research Database (Denmark)

    Perrea, Toula; Grunert, Klaus G; Krystallis Krontalis, Athanasios

    Green food is perceived by Chinese consumers as environmentally friendly and safe to consume. Through a Value-Attitude model, the paper examines the degree to which attitudes towards green food is determined by consumers’ values and their general attitudes towards environment and technology....... The link between collectivism, attitudes towards environment and attitudes towards green food is the strongest one. Collectivism also influences attitudes towards technology, which in turn influence attitudes towards green food. However, the lack of significant relationship between individualism...... and attitudes towards technology points towards the belief of Chinese people that technology is a positive determinant of food safety, and that interest in technology steams from altruistic predispositions....

  14. Defluoridation technology for drinking water and tea by green synthesized Fe3O4/Al2O3 nanoparticles coated polyurethane foams for rural communities.

    Science.gov (United States)

    Kumari, Sonu; Khan, Suphiya

    2017-08-14

    Fluoride (F) contaminated ground water poses a serious public health concern to rural population with unaffordable purification technologies. Therefore, development of a cost-effective, portable, environment and user-friendly defluoridation technique is imperative. In the present study, we report on the development of a green and cost-effective method that utilizes Fe 3 O 4 and Al 2 O 3 nanoparticles (NPs) that were synthesized using jojoba defatted meal. These NPs were impregnated on to polyurethane foam (PUF) and made into tea infusion bags. The Al 2 O 3 NPs-PUF displayed a higher water defluoridation capacity of 43.47 mg g -1 of F as compared to 34.48 mg g -1 of F with Fe 3 O 4 NPs-PUF. The synthesized Al 2 O 3 -PUF infusion bags removed the F that was under the permissible limit of 1.5 mg L -1 . The sorption experiments were conducted to verify the effect of different parameters such as pH, contact time, size of PUF and initial F concentration. The different properties of adsorbent were characterized using a combination of FESEM, EDX, XRD and FTIR techniques, respectively. The calculated total cost per NPs-PUF pouch developed is as low as US $0.05, which makes the technology most suitable for rural communities. This paper will be beneficial for researchers working toward further improvement in water purification technologies.

  15. Development of technology for brown coal liquefaction. Design, construction and operation of pilot plant; development of 50t/d pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    1986-08-01

    As for the development of 50t/d pilot plant for the development of liquefaction plant of Victorian brown coal in Austraria, outline of the contents about the second stage construction following the first stage construction up to this time is reported from the following 4 viewpoints; 1: design of process apparatuses, 2: manufacture of apparatuses, 3: fieldwork of the construction and 4: operation of the first stage facilities. On the first item the outline of detail design made by Japanese and Australian companies is described. On the second item the acceptance of purchasing goods from Japan and Australia and the condition of inspection and quality assurance to specific principal parts are described. On the third item the supplementary construction of the first stage, contents of constructions of the second stage are described. On the fourth item, preparation for operation, target, the whole circumstances and the results of maintenance, especially review of operation technique, training of operators, and occurrence and repair of troubles are described. As other relevant works, envirommental assessment, waste disposal, enviromental monitoring for exhaust gases, drainage and working enviroments, safety measure, educational training and moreover activities for local district people and the state of labor market as the support for execution of the project are described.

  16. Slipstream pilot-scale demonstration of a novel amine-based post-combustion technology for carbon dioxide capture from coal-fired power plant flue gas

    Energy Technology Data Exchange (ETDEWEB)

    Krishnamurthy, Krish R. [Linde LLC, Murray Hill, NJ (United States)

    2017-02-03

    Post-combustion CO2 capture (PCC) technology offers flexibility to treat the flue gas from both existing and new coal-fired power plants and can be applied to treat all or a portion of the flue gas. Solvent-based technologies are today the leading option for PCC from commercial coal-fired power plants as they have been applied in large-scale in other applications. Linde and BASF have been working together to develop and further improve a PCC process incorporating BASF’s novel aqueous amine-based solvent technology. This technology offers significant benefits compared to other solvent-based processes as it aims to reduce the regeneration energy requirements using novel solvents that are very stable under the coal-fired power plant feed gas conditions. BASF has developed the desired solvent based on the evaluation of a large number of candidates. In addition, long-term small pilot-scale testing of the BASF solvent has been performed on a lignite-fired flue gas. In coordination with BASF, Linde has evaluated a number of options for capital cost reduction in large engineered systems for solvent-based PCC technology. This report provides a summary of the work performed and results from a project supported by the US DOE (DE-FE0007453) for the pilot-scale demonstration of a Linde-BASF PCC technology using coal-fired power plant flue gas at a 1-1.5 MWe scale in Wilsonville, AL at the National Carbon Capture Center (NCCC). Following a project kick-off meeting in November 2011 and the conclusion of pilot plant design and engineering in February 2013, mechanical completion of the pilot plant was achieved in July 2014, and final commissioning activities were completed to enable start-up of operations in January 2015. Parametric tests were performed from January to December 2015 to determine optimal test conditions and evaluate process performance over a variety of operation parameters. A long-duration 1500-hour continuous test campaign was performed from May to

  17. Green thunderstorms

    Science.gov (United States)

    Gallagher, Frank Woolsey, III

    Many people around the world have observed green light apparently emanating from severe thunderstorms, but until recently there has been no scientific study of the phenomenon. Green thunderstorms have been observed from time to time in association with deep convection or severe weather events. Some skeptics who have not personally observed a green thunderstorm suggest that they are some kind of illusion. The existence of green thunderstorms has been objectively demonstrated by recording spectra of light from thunderstorms using a handheld spectrophotometer. During the spring and summer of 1995 and the spring of 1996 numerous storms were observed and spectra of the light emanating from these storms were recorded. Observations were made both at the ground and aboard research aircraft. Furthermore, time series of spectra were recorded as the observed color of some storms changed from dark blue to a bluish-green. Several hypotheses have been advanced to explain the occurrence of green light in connection with severe storms. Fankhauser gave some observational support to the belief that green light from thunderstorms is possible and believed that the source of the light is from the blue sky penetrating thin regions in the clouds. Fraser believes that light from the setting sun, in combination with the process of scattering by atmospheric molecules, creates the green light associated with severe weather and the thunderstorm acts only as a black backdrop. Unfortunately, no cloud illuminated by the sun is black and the green airlight produced by the Fraser theory is in reality overwhelmed by light reflected by the cloud. Often the unusual coloration has been attributed to hail or to reflection of light from foliage on the ground. The quantitative measurements made during the observation period fail to support these assumptions. We have observed thunderstorms to be green over ground that was not green and we have observed blue thunderstorms over ground that was green

  18. Green Roofs: A Part of Green Infrastructure Strategy for Urban Areas

    Science.gov (United States)

    This is a presentation on the basics of green roof technology. The presentation highlights some of the recent ORD research projects on green roofs and provides insight for the end user as to the benefits for green roof technology. It provides links to currently available EPA rep...

  19. The 2014 tanana inventory pilot: A USFS-NASA partnership to leverage advanced remote sensing technologies for forest inventory

    Science.gov (United States)

    Hans-Erik Andersen; Chad Babcock; Robert Pattison; Bruce Cook; Doug Morton; Andrew. Finley

    2015-01-01

    Interior Alaska (approx. 112 million forested acres in size) is the last remaining forested area within the United States where the Forest Inventory and Analysis (FIA) program is not currently implemented. A joint NASA-FIA inventory pilot project was carried out in 2014 to increase familiarity with interior Alaska logistics and evaluate the utility of state-of-the-art...

  20. Behaviorally Green

    DEFF Research Database (Denmark)

    Sunstein, Cass; Reisch, Lucia A.

    2016-01-01

    of suggestion, inertia, and loss aversion. If well-chosen, green defaults are likely to have large effects in reducing the economic and environmental harms associated with various products and activities. Such defaults may or may not be more expensive to consumers. In deciding whether to establish green...

  1. Green Tea

    Science.gov (United States)

    ... and cancer. Green tea is consumed as a beverage. It is also sold in liquid extracts, capsules, and tablets and is sometimes used in topical products (intended to be applied to the skin). How Much Do We Know? Although many studies have been done on green tea and its ...

  2. Retrofitting impervious urban infrastructure with green technology for rainfall-runoff restoration, indirect reuse and pollution load reduction.

    Science.gov (United States)

    Sansalone, John; Raje, Saurabh; Kertesz, Ruben; Maccarone, Kerrilynn; Seltzer, Karl; Siminari, Michele; Simms, Peter; Wood, Brandon

    2013-12-01

    The built environs alter hydrology and water resource chemistry. Florida is subject to nutrient criteria and is promulgating "no-net-load-increase" criteria for runoff and constituents (nutrients and particulate matter, PM). With such criteria, green infrastructure, hydrologic restoration, indirect reuse and source control are potential design solutions. The study simulates runoff and constituent load control through urban source area re-design to provide long-term "no-net-load-increases". A long-term continuous simulation of pre- and post-development response for an existing surface parking facility is quantified. Retrofits include a biofiltration area reactor (BAR) for hydrologic and denitrification control. A linear infiltration reactor (LIR) of cementitious permeable pavement (CPP) provides infiltration, adsorption and filtration. Pavement cleaning provided source control. Simulation of climate and source area data indicates re-design achieves "no-net-load-increases" at lower costs compared to standard construction. The retrofit system yields lower cost per nutrient load treated compared to Best Management Practices (BMPs). Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Green consumerism

    DEFF Research Database (Denmark)

    de Groot, Judith I.M.; Schuitema, Geertje; Garson, Carrie Lee

    and biospheric values influence the importance of such ‘green’ product characteristics on purchasing intentions. In two within-subjects full-factorial experimental studies (N = 100 and N = 107), we found that purchase intentions of products were only steered by green characteristics if prices were low...... and the brand was familiar. Green product characteristics did not influence purchase intentions at all when these proself product characteristics were not fulfilled (i.e., high prices and unfamiliar brands). The importance of proself and green product characteristics on purchasing intentions was also......Our presentation will focus on the influence of product characteristics and values on green consumerism. Although generally a majority of consumers support the idea of purchasing green products, we argue, based on social dilemma theory, that proself product characteristics and egoistic...

  4. Green lights

    DEFF Research Database (Denmark)

    Fisker, Peter Kielberg

    This study investigates the effect of drought on economic activity globally using remote sensing data. In particular, predicted variation in greenness is correlated with changes in the density of artificial light observed at night on a grid of 0.25 degree latitude-longitude pixels. I define drought...... as greenness estimated by lagged variation in monthly rainfall and temperature. This definition of drought performs well in identifying self-reported drought events since 2000 compared with measures of drought that do not take greenness into account, and the subsequent analysis indicates that predicted...... variation in greenness is positively associated with year-on-year changes in luminosity: If a unit of observation experiences a predicted variation in greenness that lies 1 standard deviation below the global mean, on average 1.5 - 2.5 light pixels out of 900 are extinguished that year. Finally, an attempt...

  5. Nanoreactors for green catalysis

    NARCIS (Netherlands)

    de Martino, M.T.; Abdelmohsen, L.K.E.A.; Rutjes, Floris P.J.T.; van Hest, J.C.M.; Hessel, V.

    2018-01-01

    Sustainable and environmentally benign production are key drivers for developments in the chemical industrial sector, as protecting our planet has become a significant element that should be considered for every industrial breakthrough or technological advancement. As a result, the concept of green

  6. Green energy strategies for sustainable development

    International Nuclear Information System (INIS)

    Midilli, Adnan; Dincer, Ibrahim; Ay, Murat

    2006-01-01

    In this study we propose some green energy strategies for sustainable development. In this regard, seven green energy strategies are taken into consideration to determine the sectoral, technological, and application impact ratios. Based on these ratios, we derive a new parameter as the green energy impact ratio. In addition, the green energy-based sustainability ratio is obtained by depending upon the green energy impact ratio, and the green energy utilization ratio that is calculated using actual energy data taken from literature. In order to verify these parameters, three cases are considered. Consequently, it can be considered that the sectoral impact ratio is more important and should be kept constant as much as possible in a green energy policy implementation. Moreover, the green energy-based sustainability ratio increases with an increase of technological, sectoral, and application impact ratios. This means that all negative effects on the industrial, technological, sectoral and social developments partially and/or completely decrease throughout the transition and utilization to and of green energy and technologies when possible sustainable energy strategies are preferred and applied. Thus, the sustainable energy strategies can make an important contribution to the economies of the countries where green energy (e.g., wind, solar, tidal, biomass) is abundantly produced. Therefore, the investment in green energy supply and progress should be encouraged by governments and other authorities for a green energy replacement of fossil fuels for more environmentally benign and sustainable future

  7. Cross-platform comparison of SYBR® Green real-time PCR with TaqMan PCR, microarrays and other gene expression measurement technologies evaluated in the MicroArray Quality Control (MAQC study

    Directory of Open Access Journals (Sweden)

    Dial Stacey L

    2008-07-01

    Full Text Available Abstract Background The MicroArray Quality Control (MAQC project evaluated the inter- and intra-platform reproducibility of seven microarray platforms and three quantitative gene expression assays in profiling the expression of two commercially available Reference RNA samples (Nat Biotechnol 24:1115-22, 2006. The tested microarrays were the platforms from Affymetrix, Agilent Technologies, Applied Biosystems, GE Healthcare, Illumina, Eppendorf and the National Cancer Institute, and quantitative gene expression assays included TaqMan® Gene Expression PCR Assay, Standardized (Sta RT-PCR™ and QuantiGene®. The data showed great consistency in gene expression measurements across different microarray platforms, different technologies and test sites. However, SYBR® Green real-time PCR, another common technique utilized by half of all real-time PCR users for gene expression measurement, was not addressed in the MAQC study. In the present study, we compared the performance of SYBR Green PCR with TaqMan PCR, microarrays and other quantitative technologies using the same two Reference RNA samples as the MAQC project. We assessed SYBR Green real-time PCR using commercially available RT2 Profiler™ PCR Arrays from SuperArray, containing primer pairs that have been experimentally validated to ensure gene-specificity and high amplification efficiency. Results The SYBR Green PCR Arrays exhibit good reproducibility among different users, PCR instruments and test sites. In addition, the SYBR Green PCR Arrays have the highest concordance with TaqMan PCR, and a high level of concordance with other quantitative methods and microarrays that were evaluated in this study in terms of fold-change correlation and overlap of lists of differentially expressed genes. Conclusion These data demonstrate that SYBR Green real-time PCR delivers highly comparable results in gene expression measurement with TaqMan PCR and other high-density microarrays.

  8. Designing a global monitoring system for pilot introduction of a new contraceptive technology, subcutaneous DMPA (DMPA-SC).

    Science.gov (United States)

    Stout, Anna; Wood, Siri; Namagembe, Allen; Kaboré, Alain; Siddo, Daouda; Ndione, Ida

    2018-06-01

    In collaboration with ministries of health, PATH and key partners launched the first pilot introductions of subcutaneous depot medroxyprogesterone acetate (DMPA-SC, brand name Sayana ® Press) in Burkina Faso, Niger, Senegal, and Uganda from July 2014 through June 2016. While each country implemented a unique introduction strategy, all agreed to track a set of uniform indicators to chart the effect of introducing this new method across settings. Existing national health information systems (HIS) were unable to track new methods or delivery channels introduced for a pilot, thus were not a feasible source for project data. We successfully monitored the four-country pilot introductions by implementing a four-phase approach: 1) developing and defining global indicators, 2) integrating indicators into existing country data collection tools, 3) facilitating consistent reporting and data management, and 4) analyzing and interpreting data and sharing results. Project partners leveraged existing family planning registers to the extent possible, and introduced new or modified data collection and reporting tools to generate project-specific data where necessary. We routinely shared monitoring results with global and national stakeholders, informing decisions about future investments in the product and scale up of DMPA-SC nationwide. Our process and lessons learned may provide insights for countries planning to introduce DMPA-SC or other new contraceptive methods in settings where stakeholder expectations for measureable results for decision-making are high. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase (LIGHTEnUP) – Analysis Tool User’s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Smith, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2016-06-22

    The LIGHTEnUP Analysis Tool (Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase) has been developed for The United States Department of Energy’s (U.S. DOE) Advanced Manufacturing Office (AMO) to forecast both the manufacturing sector and product life-cycle energy consumption implications of manufactured products across the U.S. economy. The tool architecture incorporates publicly available historic and projection datasets of U.S. economy-wide energy use including manufacturing, buildings operations, electricity generation and transportation. The tool requires minimal inputs to define alternate scenarios to business-as-usual projection data. The tool is not an optimization or equilibrium model and therefore does not select technologies or deployment scenarios endogenously. Instead, inputs are developed exogenous to the tool by the user to reflect detailed engineering calculations, future targets and goals, or creative insights. The tool projects the scenario’s energy, CO2 emissions, and energy expenditure (i.e., economic spending to purchase energy) implications and provides documentation to communicate results. The tool provides a transparent and uniform system of comparing manufacturing and use-phase impacts of technologies. The tool allows the user to create multiple scenarios that can reflect a range of possible future outcomes. However, reasonable scenarios require careful attention to assumptions and details about the future. This tool is part of an emerging set of AMO’s life cycle analysis (LCA) tool such as the Material Flows the Industry (MFI) tool, and the Additive Manufacturing LCA tool.

  10. Green Engineering

    Science.gov (United States)

    Green Engineering is the design, commercialization and use of processes and products that are feasible and economical while reducing the generation of pollution at the source and minimizing the risk to human health and the environment.

  11. Going Green

    Centers for Disease Control (CDC) Podcasts

    This podcast is for a general audience and provides information on how to recycle, re-use, and restore. It also covers the benefits of “Going Green" on the environment, health, and social interaction.

  12. Green lasers

    DEFF Research Database (Denmark)

    Jensen, Ole Bjarlin

    2010-01-01

    Well over a dozen papers at this year's Photonics West meeting in San Francisco boasted improvements in harmonic generation to produce visible laser beams, most of them in the green spectral range......Well over a dozen papers at this year's Photonics West meeting in San Francisco boasted improvements in harmonic generation to produce visible laser beams, most of them in the green spectral range...

  13. Green Nudging

    OpenAIRE

    Evans, Nicholas; Eickers, Stephanie; Geene, Leonie; Todorovic, Marijana; Villmow, Annika; Forschungsstelle für Umweltpolitik (FFU), Freie Universität Berlin

    2018-01-01

    Traditional environmental policy instruments have not always proven successful in fostering environmentally friendly behaviour. The question remains: how can policymakers tackle the attitude-behaviour gap when it comes to pro-environmental choices and sustainable lifestyles? One solution that has emerged is green nudging, a new and potentially promising policy tool born of behavioural economics and experimental psychology. This paper contributes to the current discussion surrounding green nud...

  14. A Pilot Study to Improve Access to Eye Care Services for Patients in Rural India by Implementing Community Ophthalmology through Innovative Telehealth Technology.

    Science.gov (United States)

    John, Sheila; Premila, M; Javed, Mohd; Vikas, G; Wagholikar, Amol

    2015-01-01

    To inform about a very unique and first of its kind telehealth pilot study in India that has provided virtual telehealth consultation to eye care patients in low resource at remote villages. Provision of Access to eye care services in remote population is always challenging due to pragmatic reasons. Advances in Telehealth technologies have provided an opportunity to improve access to remote population. However, current Telehealth technologies are limited to face-to-face video consultation only. We inform about a pilot study that illustrates real-time imaging access to ophthalmologists. Our innovative software led technology solution allowed screening of patients with varying ocular conditions. Eye camps were conducted in 2 districts in South India over a 12-month period in 2014. Total of 196 eye camps were conducted. Total of 19,634 patients attended the eye camps. Innovative software was used to conduct consultation with the ophthalmologist located in the city hospital. The software enabled virtual visit and allowed instant sharing of fundus camera images for assessment and diagnosis. About 71% of the patients were found to have Refractive Error problems, 15% of them were found to have cataract, 7% of the patients were diagnosed to have Retina problems and 7% of the patients were found to have other ocular diseases. The patients requiring cataract surgery were immediately transferred to city hospital for treatment. Software led assessment of fundus camera images assisted in identifying retinal eye diseases. Our real-time virtual visit software assisted in specialist care provision and illustrated a novel tele health solution for low resource population.

  15. ANIMAL WASTE IMPACT ON SOURCE WATERSAIDED BY EPA/NSF ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) SOURCE WATER PROTECTION PILOT

    Science.gov (United States)

    The Environmental Technology Verification Program (ETV) was established in 1995 by the U.S. Environmental Protection Agency to encourage the development and commercialization of new environmental technologies through third part testing and reporting of performance data. By ensur...

  16. Green Logistics Management

    Science.gov (United States)

    Chang, Yoon S.; Oh, Chang H.

    Nowadays, environmental management becomes a critical business consideration for companies to survive from many regulations and tough business requirements. Most of world-leading companies are now aware that environment friendly technology and management are critical to the sustainable growth of the company. The environment market has seen continuous growth marking 532B in 2000, and 590B in 2004. This growth rate is expected to grow to 700B in 2010. It is not hard to see the environment-friendly efforts in almost all aspects of business operations. Such trends can be easily found in logistics area. Green logistics aims to make environmental friendly decisions throughout a product lifecycle. Therefore for the success of green logistics, it is critical to have real time tracking capability on the product throughout the product lifecycle and smart solution service architecture. In this chapter, we introduce an RFID based green logistics solution and service.

  17. A pilot project in distance education: nurse practitioner students' experience of personal video capture technology as an assessment method of clinical skills.

    Science.gov (United States)

    Strand, Haakan; Fox-Young, Stephanie; Long, Phil; Bogossian, Fiona

    2013-03-01

    This paper reports on a pilot project aimed at exploring postgraduate distance students' experiences using personal video capture technology to complete competency assessments in physical examination. A pre-intervention survey gathered demographic data from nurse practitioner students (n=31) and measured their information communication technology fluency. Subsequently, thirteen (13) students were allocated a hand held video camera to use in their clinical setting. Those participating in the trial completed a post-intervention survey and further data were gathered using semi-structured interviews. Data were analysed by descriptive statistics and deductive content analysis, and the Unified Theory of Acceptance and Use of Technology (Venkatesh et al., 2003) were used to guide the project. Uptake of the intervention was high (93%) as students recognised the potential benefit. Students were video recorded while performing physical examinations. They described high level of stress and some anxiety, which decreased rapidly while assessment was underway. Barriers experienced were in the areas of facilitating conditions (technical character e.g. upload of files) and social influence (e.g. local ethical approval). Students valued the opportunity to reflect on their recorded performance with their clinical mentors and by themselves. This project highlights the demands and difficulties of introducing technology to support work-based learning. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Green technological change. Renewable energies, policy mix and innovation. Results of the GRETCHEN project on the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany

    International Nuclear Information System (INIS)

    Rogge, Karoline S.; Breitschopf, Barbara; Mattes, Katharina; Cantner, Uwe; Graf, Holger; Herrmann, Johannes; Kalthaus, Martin; Lutz, Christian; Wiebe, Kirsten

    2015-09-01

    The report on the GRETCHEN project that was concerned with the impact of policy mixes on the technological and structural change in renewable energy electricity production technologies in Germany covers the following issues: market and technology development of renewable energy electricity production technologies; the policy mix for renewable electricity production technologies, innovative impact of the policy mix; subordinate conclusions for politics and research.

  19. Green materials for sustainable development

    Science.gov (United States)

    Purwasasmita, B. S.

    2017-03-01

    Sustainable development is an integrity of multidiscipline concept combining ecological, social and economic aspects to construct a liveable human living system. The sustainable development can be support through the development of green materials. Green materials offers a unique characteristic and properties including abundant in nature, less toxic, economically affordable and versatility in term of physical and chemical properties. Green materials can be applied for a numerous field in science and technology applications including for energy, building, construction and infrastructures, materials science and engineering applications and pollution management and technology. For instance, green materials can be developed as a source for energy production. Green materials including biomass-based source can be developed as a source for biodiesel and bioethanol production. Biomass-based materials also can be transformed into advanced functionalized materials for advanced bio-applications such as the transformation of chitin into chitosan which further used for biomedicine, biomaterials and tissue engineering applications. Recently, cellulose-based material and lignocellulose-based materials as a source for the developing functional materials attracted the potential prospect for biomaterials, reinforcing materials and nanotechnology. Furthermore, the development of pigment materials has gaining interest by using the green materials as a source due to their unique properties. Eventually, Indonesia as a large country with a large biodiversity can enhance the development of green material to strengthen our nation competitiveness and develop the materials technology for the future.

  20. Effects of green tea extract and α-tocopherol on the lipid oxidation rate of omega-3 oils, incorporated into table spreads, prepared using multiple emulsion technology.

    Science.gov (United States)

    Dwyer, Sandra P O'; O'Beirne, David; Ní Eidhin, Deirdre; O'Kennedy, Brendan T

    2012-12-01

    This study examined the effectiveness of fat and water soluble antioxidants on the oxidative stability of omega (ω)-3 rich table spreads, produced using novel multiple emulsion technology. Table spreads were produced by dispersing an oil-in-water (O/W) emulsion (500 g/kg 85 camelina/15 fish oil blend) in a hardstock/rapeseed oil blend, using sodium caseinate and polyglycerol polyricinoleate as emulsifiers. The O/W and oil-in-water-in-oil (O/W/O) emulsions contained either a water soluble antioxidant (green tea extract [GTE]), an oil soluble antioxidant (α-Tocopherol), or both. Spreads containing α-Tocopherol had the highest lipid hydroperoxide values, whereas spreads containing GTE had the lowest (P < 0.05), during storage at 5°C, while p-Anisidine values did not differ significantly. Particle size was generally unaffected by antioxidant type (P < 0.05). Double emulsion (O/W/O) structures were clearly seen in confocal images of the spreads. By the end of storage, none of the spreads had significantly different G' values. Firmness (Newtons) of all spreads generally increased during storage (P < 0.05). © 2012 Institute of Food Technologists®

  1. Green technology effect of injection pressure, timing and compression ratio in constant pressure heat addition cycle by an eco-friendly material.

    Science.gov (United States)

    Karthikayan, S; Sankaranarayanan, G; Karthikeyan, R

    2015-11-01

    Present energy strategies focus on environmental issues, especially environmental pollution prevention and control by eco-friendly green technologies. This includes, increase in the energy supplies, encouraging cleaner and more efficient energy management, addressing air pollution, greenhouse effect, global warming, and climate change. Biofuels provide the panorama of new fiscal opportunities for people in rural area for meeting their need and also the demand of the local market. Biofuels concern protection of the environment and job creation. Renewable energy sources are self-reliance resources, have the potential in energy management with less emissions of air pollutants. Biofuels are expected to reduce dependability on imported crude oil with connected economic susceptibility, reduce greenhouse gases, other pollutants and invigorate the economy by increasing demand and prices for agricultural products. The use of neat paradise tree oil and induction of eco-friendly material Hydrogen through inlet manifold in a constant pressure heat addition cycle engine (diesel engine) with optimized engine operating parameters such as injection timing, injection pressure and compression ratio. The results shows the heat utilization efficiency for neat vegetable oil is 29% and neat oil with 15% Hydrogen as 33%. The exhaust gas temperature (EGT) for 15% of H2 share as 450°C at full load and the heat release of 80J/deg. crank angle for 15% Hydrogen energy share. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Ecological Literacy, Urban Green Space, and Mobile Technology: Exploring the Impacts of an Arboretum Curriculum Designed for Undergraduate Biology Courses

    Science.gov (United States)

    Phoebus, Patrick E.

    Increasing individual ecological literacy levels may help citizens make informed choices about the environmental challenges facing society. The purpose of this study was to explore the impacts of an arboretum curriculum incorporating mobile technology and an urban greenspace on the ecological knowledge, environmental attitudes and beliefs, and environmental behaviors of undergraduate biology students and pre-service K-8 teachers during a summer course. Using a convergent parallel mixed-methods design, both quantitative and qualitative data were collected, analyzed, and later merged to create an enhanced understanding of the impact of the curriculum on the environmental attitudes and beliefs of the participants. Quantitative results revealed a significant difference between pre- and post-survey scores for ecological knowledge, with no significant differences between pre- and post-scores for the other variables measured. However, no significant difference in scores was found between experimental and comparison groups for any of the three variables. When the two data sets were compared, results from the quantitative and qualitative components were found to converge and diverge. Quantitative data indicated the environmental attitudes and beliefs of participants were unaffected by the arboretum curriculum. Similarly, qualitative data indicated participants' perceived environmental attitudes and beliefs about the importance of nature remained unchanged throughout the course of the study. However, qualitative data supporting the theme connecting with the curriculum suggested experiences with the arboretum curriculum helped participants develop an appreciation for trees and nature and led them to believe they increased their knowledge about trees.

  3. Building partnerships: a pilot study of stakeholders' attitudes on technology disruption in behavioral health delivery and research.

    Science.gov (United States)

    Sucala, Madalina; Nilsen, Wendy; Muench, Frederick

    2017-12-01

    Collaborations between scientists, care providers, and technology industry professionals are becoming more relevant for developing, testing, and implementing behavioral health technologies. As the need for such partnerships increases, it is important to understand stakeholders' attitudes about their role in partnering for developing such technologies and how much do they expect technology to impact behavioral research and care. The aim of this study was to investigate how much technology disruption do stakeholders expect in healthcare, as well as their perceived contribution in partnering for developing behavioral health technologies. Stakeholders (N = 74) responded to an online convenience sampling survey. Over 89% of participants reported expecting that technology will bring at least a moderate amount of disruption in the current models of behavioral healthcare, with respondents with the most experience in digital health expecting the most disruption. As for their perception of each other's role in partnering for developing behavioral health technologies, one group's weakness was considered to be complemented by another group's strength. Academics were perceived as having more theoretical and research expertise but being less technology-savvy, while industry professionals were considered to excel at technological and marketing activities. Providers were considered to have the most clinical and real-world healthcare industry expertise. Our results indicate that technology is expected to disrupt current healthcare models, while also highlighting the need for collaboration, as no single group was considered to have sufficient expertise and resources to develop successful, effective behavioral health technologies on its own. These results may contribute to a better understanding of how technology disruption is affecting behavioral healthcare from the standpoint of its key players, which may lead to better collaborative models of research and care delivery.

  4. How green are environmental technologies? A new approach for a global evaluation: the case of WWTP effluents ozonation.

    Science.gov (United States)

    Papa, M; Pedrazzani, R; Bertanza, G

    2013-07-01

    The research on the impact of chemical pollution is now increasingly attracted by the topic of organic micropollutants: as secondary biological treatment of wastewater does not provide the complete elimination of these substances, an advanced treatment downstream the biological process can be implemented. Notwithstanding, the benefits of improved effluent quality can be weakened by the negative effects on air quality, when energy consumption and related pollutants emissions deriving from the advanced treatment technologies are taken into account. It is the aim of this work to present an innovative methodology to judge the environmental compatibility of wastewater treatment processes on the basis of the damage on human health produced/avoided, expressed as an economic value. In particular, while for air pollution the established external costs were applied, for water pollution the rates of the impacts on human health have been evaluated in terms of Global Burden of Disease and measured in units of DALY (Disability-Adjusted Life Years), then converted into costs based on Gross Domestic Product. As a first application, this procedure was used for assessing environmental compatibility of a final ozonation: the results of this study showed that the reduction of water pollution achieved by means of ozonation might be beneficial for human health at an extent which is in the same order of magnitude of damage caused by air pollution, emphasizing that the question if the use of advanced (energy-intensive) treatments is a proper solution to remove organic micropollutants from wastewater remains still open. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Pilot Implementations

    DEFF Research Database (Denmark)

    Manikas, Maria Ie

    by conducting a literature review. The concept of pilot implementation, although commonly used in practice, is rather disregarded in research. In the literature, pilot implementations are mainly treated as secondary to the learning outcomes and are presented as merely a means to acquire knowledge about a given...... objective. The prevalent understanding is that pilot implementations are an ISD technique that extends prototyping from the lab and into test during real use. Another perception is that pilot implementations are a project multiple of co-existing enactments of the pilot implementation. From this perspective......This PhD dissertation engages in the study of pilot (system) implementation. In the field of information systems, pilot implementations are commissioned as a way to learn from real use of a pilot system with real data, by real users during an information systems development (ISD) project and before...

  6. Green banking

    Directory of Open Access Journals (Sweden)

    Maja Drobnjaković

    2013-06-01

    Full Text Available There is an urgent need to march towards “low - carbon economy”. Global challenges of diminishing fossil fuel reserves, climate change, environmental management and finite natural resources serving an expanding world population - these reasons mean that urgent action is required to transition to solutions which minimize environmental impact and are sustainable. We are at the start of the low - carbon revolution and those that have started on their low - carbon journey already are seeing benefits such as new markets and customers, improved economic, social and environmental performance, and reduced bills and risks. Green investment banks offer alternative financial services: green car loans, energy efficiency mortgages, alternative energy venture capital, eco - savings deposits and green credit cards. These items represent innovative financial products.

  7. THE USE OF GIS TECHNOLOGIES IN ANALYZING CHALLENGES AND OPPORTUNITIES FOR THE MANAGEMENT OF URBAN GREEN SPACES IN KIGALI CITY, RWANDA

    Directory of Open Access Journals (Sweden)

    G. Rwanyiziri

    2014-01-01

    Full Text Available This study was assessing the challenges and opportunities for managing Green Spaces (GS of the Urban Part of Kigali City (UPKC. To find out the GS classes and their threats, the land use classes were identified using GIS technologies. Its output was completed by the field visit, questionnaire survey, informal interviews and desk review of the existing environmental and biodiversity policies and laws. The land use assessment has shown that the built up areas is the most predominant and occupies 74.3%, while the green spaces occupy only 25.3% of the total areas of Urban Part of Kigali City (UPKC. Among the GS classes identified in UPKC, wetlands occupy about 62.6% of the total area of the GS, forests 25%, gardens that are combination of the road side trees, the roundabouts, and playgrounds occupy 12.4% of the total area of GS while the seasonal and perennial crops areas are not significant in the city. In addition, results have shown that GS play different roles in the city among others, the beautification of the city, the air purification and refreshment, waste water treatment, heat reduction, mind refreshment; act as habitat, food and corridors for a good number of animal, etc. Even though there is no specific law or policy to the urban GS management and protection, the Government of Rwanda (GoR has put in place a good number of opportunities that take them into consideration. Those include, (1 the governmental policies such as Environmental Policy, Biodiversity Policy, and Forest Policy; (2 the laws such as Organic Environmental Law and, (3 the plans such the master plans for the three districts that make Kigali City. Despite these opportunities, the management of GS in Kigali City is still facing some challenges that the Kigali City authorities are still trying to address. Those include the lack of policies on GS management, low level of awareness on GS management among local people, and the demographic pressure particularly caused by the

  8. Expedited patent examination for green inventions: Developing countries' policy choices

    International Nuclear Information System (INIS)

    Lu, Bingbin

    2013-01-01

    Innovation in green technology is important. Patent rights can provide incentives for green technology research and development. Expedited patent examination for green inventions has emerged as a policy instrument to provide such incentives. Developing countries were never opposed to patents for green technologies. China and Brazil have led the way by offering expedited examinations for green patent applications. More developing countries are expected to follow. Expedited examination for green technologies is consistent with the intellectual property system objectives and is justified by the clear social benefit from green technologies. Introducing such expedited programs in developing countries has sufficient advantages. Existing models of expedited programs for green technologies are analyzed to generalize key issues and to discern suitable policy choices for developing countries. When introducing such programs, a balanced definition for green technology is preferred; a special classification requirement is premature and is not recommended; a pre-examination search requirement is generally recommended to balance patent office workloads, and a green patent database is recommended. - Highlights: • There is no north–south divide in promoting green technologies. • Earlier issuance of green patents has its great social benefit. • Green patent application should receive expedited examination. • Developing countries should introduce such expedited programs. • A suitable approach for developing countries is searched and recommended

  9. Pilot Studies of Geologic and Terrestrial Carbon Sequestration in the Big Sky Region, USA, and Opportunities for Commercial Scale Deployment of New Technologies

    Science.gov (United States)

    Waggoner, L. A.; Capalbo, S. M.; Talbott, J.

    2007-05-01

    Within the Big Sky region, including Montana, Idaho, South Dakota, Wyoming and the Pacific Northwest, industry is developing new coal-fired power plants using the abundant coal and other fossil-based resources. Of crucial importance to future development programs are robust carbon mitigation plans that include a technical and economic assessment of regional carbon sequestration opportunities. The objective of the Big Sky Carbon Sequestration Partnership (BSCSP) is to promote the development of a regional framework and infrastructure required to validate and deploy carbon sequestration technologies. Initial work compiled sources and potential sinks for carbon dioxide (CO2) in the Big Sky Region and developed the online Carbon Atlas. Current efforts couple geologic and terrestrial field validation tests with market assessments, economic analysis and regulatory and public outreach. The primary geological efforts are in the demonstration of carbon storage in mafic/basalt formations, a geology not yet well characterized but with significant long-term storage potential in the region and other parts of the world; and in the Madison Formation, a large carbonate aquifer in Wyoming and Montana. Terrestrial sequestration relies on management practices and technologies to remove atmospheric CO2 to storage in trees, plants, and soil. This indirect sequestration method can be implemented today and is on the front-line of voluntary, market-based approaches to reduce CO2 emissions. Details of pilot projects are presented including: new technologies, challenges and successes of projects and potential for commercial-scale deployment.

  10. Green times

    International Nuclear Information System (INIS)

    Hasenclever, W.D.; Hasenclever, C.

    1982-01-01

    The authors, founding members of the ''Green Party'' have in mind to make a very personal contribution to a better understanding of the present political situation which, although it seems to have reached a deadlock, still offers positive chances and prospects. New approaches in policy are mentioned which may help to overcome the present state of resignation of many adolescents and adults. Among other things, they describe themselves setting out for new pathways, the ''Greens'' in Parliament, prospect for the future, opportunities of the ecologically oriented economic policy. Finally, they call upon the reader to think and develop further under the motto ''What we all can do''. (HSCH) [de

  11. Final report from VFL technologies for the pilot-scale thermal treatment of Lower East Fork Poplar Creek floodplain soils: LEFPC appendices, volume 1, appendix I-IV

    International Nuclear Information System (INIS)

    1994-09-01

    This document contains Appendix I-IV for the pilot-scale thermal treatment of lower East Fork Poplar Creek floodplain soils. Included are calibration records; quality assurance; soils characterization; pilot scale trial runs

  12. Improving student’s technical drawing in building technology course with shared and digital enrichment material in order to support green technology

    Science.gov (United States)

    Wizaka, W.; Nurdiani, N.

    2017-12-01

    Technical drawing is a step that is absolutely necessary to be mastered by the architects in presenting their product in design development phase. The easy readiness and completeness of information in a drawing determine the quality and timeliness of a project. An incomplete engineering drawing is difficult to read by foreman or craftsman, and the risk of misunderstanding of the drawing will cost expensive and have potential risk to create many bad implications in the project. Unfortunately, the knowledge and skill of drawing technique are often not completely mastered by most students. On the other hand, according to the regional development situation in architectural and construction issue, the drawing standards must be fully utilized in international standards in order to facilitate cooperative work involving workers and engineers from these region countries. This research will be described some errors that often made by students and of international drafting symbols that supposed to be well used by students and then insert multi-media resources as digital enrichment material that supposed to be used as an additional material. The goal of this study will be to examine how multi-media is employed to positively impact student learning in a Building Technology course.

  13. Pilot Results - The use of Real-time Preference Measurement Technology to Support the Retention of Enlisted Personnel

    Science.gov (United States)

    2010-03-01

    Preference Measurement Technology (the “Pilot” project). Since 2001, TCS has provided its web-based product to companies looking to generate...technology (laptops, cameras, LCD TVs, digital services), telecommunications (service plans, handsets) and business-to-business ( B2B ) and supply

  14. Going Green: The Business Case for Greening your Energy Company

    Energy Technology Data Exchange (ETDEWEB)

    Lavery, Greg

    2007-07-01

    We are all familiar with the challenges facing the energy industry: supply security, climate change, emerging cleaner technologies, retail competition, staffing, and the quest for growth. This paper demonstrates how a proactive environmentally considered ('green') corporate approach addresses these issues and unlocks four tangible areas of value addition for energy companies. Based on over a decade of experience by the author in this emerging field, this paper provides some golden rules for companies considering the green approach and showcases an Australian market leading energy company who is unlocking green value. (auth)

  15. Promoting sustainability through green chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Kirchhoff, Mary M. [American Chemical Society, 1155 Sixteenth Street, NW, Washington, DC 20036 (United States)

    2005-06-15

    Green chemistry is an important tool in achieving sustainability. The implementation of green chemistry, the design of chemical products and processes that reduce or eliminate the use and generation of hazardous substances, is essential if the expanding global population is to enjoy an increased standard of living without having a negative impact on the health of the planet. Cleaner technologies will allow the chemical enterprise to provide society with the goods and services on which it depends in an environmentally responsible manner. Green chemistry provides solutions to such global challenges as climate change, sustainable agriculture, energy, toxics in the environment, and the depletion of natural resources. A collaborative effort by industry, academia, and government is needed to promote the adoption of the green chemistry technologies necessary to achieve a sustainable society.

  16. Going Green

    Science.gov (United States)

    Witkowsky, Kathy

    2009-01-01

    Going green saves money and can even make money. Sustainable practices promote better health, less absenteeism, and more productivity. They also attract students, who are paying increasing attention to schools' environmental policies. Beyond being the smart thing to do, administrators at the University of Washington say repeatedly, it's the right…

  17. Buying Green

    Science.gov (United States)

    Layng, T. V. Joe

    2010-01-01

    In "Buying Green," Joe Layng recognizes that, like all choices we make, our decisions as consumers are more likely to be influenced by their short-term consequences for us as individuals (price, quality) than they are by their long-term consequences for society (environmental impact). He believes that the equation can be tilted in favor of greener…

  18. Green pioneers.

    Science.gov (United States)

    Trueland, Jennifer

    The government has set tough targets for the NHS in England to reduce its carbon footprint. In this article, nurses and managers at Nottinghamshire Healthcare NHS Trust explain how a programme of 'greening' initiatives - including a trial of electric cars for community staff - have slashed the trust's CO2 output.

  19. Automatically Green

    DEFF Research Database (Denmark)

    Sunstein, Cass R.; Reisch, Lucia

    2014-01-01

    reasons include the power of suggestion; inertia and procrastination; and loss aversion. If well-chosen, green defaults are likely to have large effects in reducing the economic and environmental harms associated with various products and activities. Such defaults may or may not be more expensive...

  20. Automatically Green

    DEFF Research Database (Denmark)

    Sunstein, Cass R.; Reisch, Lucia

    reasons include the power of suggestion; inertia and procrastination; and loss aversion. If well-chosen, green defaults are likely to have large effects in reducing the economic and environmental harms associated with various products and activities. Such defaults may or may not be more expensive...

  1. Going Green

    Centers for Disease Control (CDC) Podcasts

    2008-04-18

    This podcast is for a general audience and provides information on how to recycle, re-use, and restore. It also covers the benefits of “Going Green" on the environment, health, and social interaction.  Created: 4/18/2008 by National Center for Environmental Health (NCEH), ATSDR.   Date Released: 5/8/2008.

  2. Opportunities for green growth; Vihreaen kasvun mahdollisuudet

    Energy Technology Data Exchange (ETDEWEB)

    Antikainen, R.; Mickwitz, P.; Seppaelae, J. [and others

    2013-03-15

    .) Facilitating green pilots and trials for the domestic and export markets. (D.) Creating international and domestic strategic openings and partnerships (E.) Creating space for green growth by removing wasteful systems. (F.) Fostering continuous and systematic learning as an accelerator of green growth. (orig.)

  3. PILOT-AND FULL-SCALE DEMONSTRATION OF ADVANCED MERCURY CONTROL TECHNOLOGIES FOR LIGNITE-FIRED POWER PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Steven A. Benson; Charlene R. Crocker; Kevin C. Galbreath; Jay R. Gunderson; Michael J. Holmes; Jason D. Laumb; Jill M. Mackenzie; Michelle R. Olderbak; John H. Pavlish; Li Yan; Ye Zhuang

    2005-02-01

    The overall objective of the project was to develop advanced innovative mercury control technologies to reduce mercury emissions by 50%-90% in flue gases typically found in North Dakota lignite-fired power plants at costs from one-half to three-quarters of current estimated costs. Power plants firing North Dakota lignite produce flue gases that contain >85% elemental mercury, which is difficult to collect. The specific objectives were focused on determining the feasibility of the following technologies: Hg oxidation for increased Hg capture in dry scrubbers, incorporation of additives and technologies that enhance Hg sorbent effectiveness in electrostatic precipitators (ESPs) and baghouses, the use of amended silicates in lignite-derived flue gases for Hg capture, and the use of Hg adsorbents within a baghouse. The approach to developing Hg control technologies for North Dakota lignites involved examining the feasibility of the following technologies: Hg capture upstream of an ESP using sorbent enhancement, Hg oxidation and control using dry scrubbers, enhanced oxidation at a full-scale power plant using tire-derived fuel and oxidizing catalysts, and testing of Hg control technologies in the Advanced Hybrid{trademark} filter.

  4. Facile and green preparation of novel adsorption materials by combining sol-gel with ion imprinting technology for selective removal of Cu(II) ions from aqueous solution

    Science.gov (United States)

    Ren, Zhongqi; Zhu, Xinyan; Du, Jian; Kong, Delong; Wang, Nian; Wang, Zhuo; Wang, Qi; Liu, Wei; Li, Qunsheng; Zhou, Zhiyong

    2018-03-01

    A novel green adsorption polymer was prepared by ion imprinted technology in conjunction with sol-gel process under mild conditions for the selective removal of Cu(II) ions from aqueous solution. Effects of preparation conditions on adsorption performance of prepared polymers were studied. The ion-imprinted polymer was prepared using Cu(II) ion as template, N-[3-(2-aminoethylamino) propyl] trimethoxysilane (AAPTMS) as functional monomer and tetraethyl orthosilicate (TEOS) as cross-linker. Water was used as solvent in the whole preparation process. The imprinted and non-imprinted polymers were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscope (AFM), Brunauer, Emmett and Teller (BET) and zeta potential. Three-dimensional network structure was formed and functional monomer was successfully cross-linked into the network structure of polymers. Effects of adsorption conditions on adsorption performance of prepared polymers were studied too. The pH value is of great influence on adsorption behavior. Adsorption by ion-imprinted polymer was fast (adsorption equilibrium was reached within 60 min). The adsorption capacity of Cu(II) ion-imprinted polymer was always larger than that of non-imprinted polymer. Pseudo-second-order kinetics model and Freundlich isotherm model fitted well with adsorption data. The maximum adsorption capacity of Cu(II) ion-imprinted polymer was 39.82 mg·g-1. However, the preparation conditions used in this work are much milder than those reported in literatures. The Cu(II) ion-imprinted polymer showed high selectivity and relative selectivity coefficients for Pb(II), Ni(II), Cd(II) and Co(II). In addition, the prepared ion-imprinted polymer could be reused several times without significant loss of adsorption capacity.

  5. Tailoring through Technology: A Retrospective Review of a Single Surgeon's Experience with Implant-Based Breast Reconstruction before and after Implementation of Laser-Assisted Indocyanine Green Angiography.

    Science.gov (United States)

    Harless, Christin A; Jacobson, Steven R

    2016-05-01

    Reported complication rates of implant-based breast reconstruction in the literature exceed 50%, with mastectomy skin flap necrosis reported to occur in up to 25% of cases. Laser-assisted indocyanine green angiography (LA-ICGA) technology allows the surgeon to optimize preservation of the mastectomy skin flap while avoiding skin necrosis. The purpose of this study was to determine if outcomes of breast reconstruction are beneficially affected by using LA-ICGA. A total 269 consecutive women (467 breast reconstructions) undergoing implant-based breast reconstruction from 2008 to 2013 were examined. The complication rates of those who underwent reconstruction prior to the implementation of LA-ICGA were compared with those who were reconstructed after implementation of LA-ICGA. A total of 254 consecutive breast reconstructions were performed prior to implementation of LA-ICGA, and 213 breasts were reconstructed with the use of LA-ICGA. After implementation of LA-ICGA System, the rate of mastectomy skin flap necrosis decreased by 86% (6.7% versus 0.9%, p = 0.02). The overall complication rate prior to LA-ICGA was 13.8% compared with 6.6% with the use of LA-ICGA (p = 0.01). After LA-ICGA was incorporated, the percentage of patients undergoing single-stage reconstruction increased from 12% to 32% (p = <0.001). Implementation of LA-ICGA provides the surgeon with an objective assessment of mastectomy flap perfusion resulting in a trend toward overall reduction in complications as well as an 86% decrease in the rate of subsequent skin necrosis. The objective assessment of mastectomy flap perfusion allows the surgeon to tailor breast reconstruction intraoperatively, in real-time, adjusting for the individual patient's mastectomy flap perfusion. © 2016 Wiley Periodicals, Inc.

  6. Green LPG

    Energy Technology Data Exchange (ETDEWEB)

    Hulteberg, Christian; Brandin, Jan; Leveau, Andreas (Biofuel-Solution AB, Limhamn (Sweden))

    2010-12-15

    The use of energy gases with renewable origins will become important with diminishing fossil resources. This as the infrastructure of the gaseous fuels is well built out and the distribution networks already exist. LPG is one of the most versatile fuels around, perfect for rural areas and in many other applications. The fossil origin of the fuel will, in today's climate and environmental debate, however position it as a thing of the past and not part of the future energy supply. The technology and development performed under this and previous programs with the Swedish Gas Centre will however suggest a way to bridge this conception and make LPG a part of the future energy mix. This report constitutes the results from the development performed under the SGC program 210 and is aimed at verifying the results from the previous SGC program 198, proving the concept for producing propane from renewable glycerol. Attractive and potentially profitable LPG premium segments that can be reached by producing bio-propane would be the autogas market. Another attractive segment to target is the outdoor and camping segment, where there already exist awareness for nature and the environment. A third interesting segment is in small-scale heat or combined heat and power generation, where a premium price can be reaped for renewable energy as well as the addition of LPG to biogas. Another important aspect of the renewable LPG is that it motivates external stakeholders, such as local, regional, national and international governments as well as environmental and other lobby groups to consider LPG a part of the future energy mix and not a thing of the past. A good starting point for two and three carbon energy gases is glycerine, with its three carbon backbone. The reason for focusing on glycerine is its benign chemical nature, it is: - Harmless from a toxic standpoint; - Chemically inert; - Non-corrosive; - Relatively high energy density; - Zero carbon dioxide emissions. It is also

  7. Proceedings of the 5. annual international greening rooftops for sustainable communities conference, awards and trade show

    International Nuclear Information System (INIS)

    2007-01-01

    This conference provided a forum to discuss a broad range of benefits associated with green roof construction. In addition to creating green space, green roofs save energy, mitigate the urban heat island effect, clean stormwater runoff, attenuate sound, and provide aesthetic value. Strategies to promote the widespread adoption of green roof technology in North America were presented along with federal policies and standards that support green roof applications. Some timely green roofing topics were also addressed, such as the residential green roof market and urban agriculture. Innovative research programs and demonstration programs were highlighted along with policy developments in countries where green roof technology has been widely implemented. Public outreach, training and education programs were also reviewed. The conference was divided into the following sessions: stormwater policy development; green roofs in Minnesota and Chicago; stormwater management and other benefits of green roofs; greening the green roof system; development of green roof standards and policies; stormwater management and life cycle calculation; stormwater research; overcoming the challenge of the residential green roof market; feasibility and impact assessments of green roof programs; green roof design case studies; energy and thermal performance; urban agriculture and green roofs; green roof policy, incentives and regulations in the City of Minneapolis; innovative uses of green roofs; green roof growing medium and vegetation; green walls and green roof gardens; studies on the benefits of green roofs; and, careers in greening. The conference featured 47 presentations, of which 34 have been catalogued separately for inclusion in this database. refs., tabs., figs

  8. Using Technology to Claim Rights to Free Maternal Health Care: Lessons about Impact from the My Health, My Voice Pilot Project in India.

    Science.gov (United States)

    Dasgupt, Jashodhara; Sandhya, Y K; Lobis, Samantha; Verma, Pravesh; Schaaf, Marta

    2015-12-10

    My Health, My Voice is a human rights-based project that pilots the use of technology to monitor and display online data regarding informal payments for maternal health care in two districts of Uttar Pradesh, India. SAHAYOG, an organization based in Uttar Pradesh, partnered with a grassroots women's forum to inform women about their entitlements, to publicize the project, and to implement a toll-free hotline where women could report health providers' demands for informal payments. Between January 2012 and May 2013, the hotline recorded 873 reports of informal payment demands. Monitoring and evaluation revealed that the project enhanced women's knowledge of their entitlements, as well as their confidence to claim their rights. Anecdotal evidence suggests that health providers' demands for informal payments were reduced in response to the project, although hospital and district officials did not regularly consult the data. The use of technology accorded greater legitimacy among governmental stakeholders. Future research should examine the sustainability of changes, as well as the mechanisms driving health sector responsiveness. Copyright © 2015 Dasgupta et al. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0/), which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original author and source are credited.

  9. Tanzania Health Information Technology (T-HIT) System: Pilot Test of a Tablet-Based System to Improve Prevention of Mother-to-Child Transmission of HIV.

    Science.gov (United States)

    Bull, Sheana; Thomas, Deborah Sk; Nyanza, Elias C; Ngallaba, Sospatro E

    2018-01-15

    The prevention of mother-to-child transmission (PMTCT) of HIV requires innovative solutions. Although routine monitoring is effective in some areas, standardized and easy-to-scale solutions to identify and monitor pregnant women, test them for HIV, and treat them and their children is still lacking. Mobile health (mHealth) offers opportunities for surveillance and reporting in rural areas of low- and middle-income countries. The aim of this study was to document the preliminary impacts of the Tanzania Health Information Technology (T-HIT) system mHealth intervention aimed at health workers for PMTCT care delivery and capacity building in a rural area of Tanzania. We developed T-HIT as a tablet-based system for an electronic data collection system designed to capture and report PMTCT data during antenatal, delivery, and postnatal visits in Misungwi, Tanzania. T-HIT was tested by health workers in a pilot randomized trial comparing seven sites using T-HIT assigned at random to seven control sites; all sites maintained standard paper record-keeping during the pilot intervention period. We compared numbers of antenatal visits, number of HIV tests administered, and women testing positive across all sites. Health workers recorded data from antenatal visits for 1530 women; of these, 695 (45.42%) were tested for HIV and 3.59% (55/1530) tested positive. Health workers were unable to conduct an HIV test for 103 women (6.73%, 103/1530) because of lack of reagent, which is not captured on paper logs. There was no difference in the activity level for testing when comparing sites T-HIT to non-T-HIT sites. We observed a significant postintervention increase in the numbers of women testing positive for HIV compared with the preintervention period (P=.04), but this was likely not attributable to the T-HIT system. T-HIT had a high degree of acceptability and feasibility and is perceived as useful by health workers, who documented more antenatal visits during the pilot intervention

  10. Tanzania Health Information Technology (T-HIT) System: Pilot Test of a Tablet-Based System to Improve Prevention of Mother-to-Child Transmission of HIV

    Science.gov (United States)

    Bull, Sheana; Nyanza, Elias C; Ngallaba, Sospatro E

    2018-01-01

    Background The prevention of mother-to-child transmission (PMTCT) of HIV requires innovative solutions. Although routine monitoring is effective in some areas, standardized and easy-to-scale solutions to identify and monitor pregnant women, test them for HIV, and treat them and their children is still lacking. Mobile health (mHealth) offers opportunities for surveillance and reporting in rural areas of low- and middle-income countries. Objective The aim of this study was to document the preliminary impacts of the Tanzania Health Information Technology (T-HIT) system mHealth intervention aimed at health workers for PMTCT care delivery and capacity building in a rural area of Tanzania. Methods We developed T-HIT as a tablet-based system for an electronic data collection system designed to capture and report PMTCT data during antenatal, delivery, and postnatal visits in Misungwi, Tanzania. T-HIT was tested by health workers in a pilot randomized trial comparing seven sites using T-HIT assigned at random to seven control sites; all sites maintained standard paper record-keeping during the pilot intervention period. We compared numbers of antenatal visits, number of HIV tests administered, and women testing positive across all sites. Results Health workers recorded data from antenatal visits for 1530 women; of these, 695 (45.42%) were tested for HIV and 3.59% (55/1530) tested positive. Health workers were unable to conduct an HIV test for 103 women (6.73%, 103/1530) because of lack of reagent, which is not captured on paper logs. There was no difference in the activity level for testing when comparing sites T-HIT to non-T-HIT sites. We observed a significant postintervention increase in the numbers of women testing positive for HIV compared with the preintervention period (P=.04), but this was likely not attributable to the T-HIT system. Conclusions T-HIT had a high degree of acceptability and feasibility and is perceived as useful by health workers, who documented more

  11. Sentinel Node Mapping Using Indocyanine Green and Near-infrared Fluorescence Imaging Technology for Uterine Malignancies: Preliminary Experience With the Da Vinci Xi System.

    Science.gov (United States)

    Siesto, Gabriele; Romano, Fabrizio; Fiamengo, Barbara; Vitobello, Domenico

    2016-01-01

    Sentinel lymph node (SLN) mapping has emerged as the new frontier for the surgical staging of apparently early-stage cervical and endometrial cancer. Different colorimetric and radioactive tracers, alone and in combination, have been proposed with encouraging results. Fluorometric mapping using indocyanine green (ICG) appears to be a suitable and attractive alternative to provide reliable staging [1-4]. In this video, we present the technique of SLN mapping in 2 cases (1 endometrial and 1 cervical cancer, respectively) using ICG and the near-infrared technology provided by the newest Da Vinci Xi robotic system (Intuitive Surgical Inc., Sunnyvale, CA). Together we report the results of our preliminary experience on the first 20 cases performed. The new robotic Da Vinci Xi system was available at our institution since May 2015. Upon institutional review board/ethical committee approval, all consecutive patients with early-stage endometrial and cervical cancer who were judged suitable for robotic surgery have been enrolled for SLN mapping with ICG. We adopted the Memorial Sloan Kettering Cancer Center SLN algorithm; the tracer was delivered into the cervix in all cases. Four milliliters (1.25 mg/mL) of ICG was injected divided into the 3- and 9-o'clock positions of the cervix alone, with 1 mL deep into the stroma and 1 mL submucosally at the skin incision. Sentinel lymph nodes were examined with a protocol including both ultrastaging with immunohistochemistry [3] and 1-step nucleic acid amplification assay [5,6] under a parallel protocol of study. During the study period, 20 cases were managed; 14 and 6 patients had endometrial and cervical cancer, respectively. SLN was detected in all cases (20/20, 100%). Bilateral SLNs were detected in 17 of 20 (85.0%) cases. Based on preoperative and intraoperative findings, 13 (65.0%) patients received systematic pelvic lymphadenectomy after SLN mapping. Three (15.0%) patients had microscopic nodal metastases on SLN. No

  12. Contribution of information and communication technologies in education and training in radiation protection: feedback of ENETRAP pilot e-learning course and perspective

    International Nuclear Information System (INIS)

    Livolsi, Paul; Marco, Marisa; Llorente, Cristina; Rodriguez, Monica; Michel, Xavier; Balosso, Jacques

    2008-01-01

    A radiation protection pilot course using Information and Communication Technologies (ICTs) and cooperative tools has been proposed to students at Master level, MSc in Radiation Protection. The objectives and purposes are to introduce ICTs in order to improve the Education and Training (E and T) in Radiation Protection by facilitating the access to resources and services, and the exchanges and collaborative work between learners and teachers. The use of Open and Distance Learning (ODL) is one of the means to ensure the future supply of appropriately educated and skilled personnel for those who use ionising radiations across Europe and secondly, to meet the increasing demand and decreasing number of Radiation Protection Experts available in Europe. Open and Distance Learning contributes by promoting mobility of workers and students throughout the European countries. Assessment of this pilot course points out the benefits and inconveniences of such pedagogical approach in the Radiation Protection domain. This new approach has been considered attractive and efficient by students for specific topics. Students feel more involved in their own training by learning topics whenever they want, at their own pace. Concerning the content, an improvement has to be implemented by integrating Rich Media contents, and a more efficient track of each students knowledge by a tutor. Full complete distance learning seems not to be the best way, because students need to exchange in a face to face environment, with teachers, lecturers and tutors. A blended learning (b-Learning) is preferred by proposing various pedagogical sequences such as face to face, e-Learning, case studies and simulation activities. E-Learning or b-Learning can contribute to the capitalization of already existing good practices in the field of occupational, public and medical exposures. This pedagogical approach will be integrated in a part of the future European Master degree in Radiation Protection which starts in

  13. Education Outreach Associated with Technology Transfer in a Colonia of South Texas: Green Valley Farms Science and Space Club for Middle School Aged Children in Green Valley Farms, San Benito, Texas

    Science.gov (United States)

    Potess, Marla D.; Rainwater, Ken; Muirhead, Dean

    2004-01-01

    Texas colonias are unincorporated subdivisions characterized by inadequate water and wastewater infrastructure, inadequate drainage and road infrastructure, substandard housing, and poverty. Since 1989 the Texas Legislature has implemented policies to halt further development of colonias and to address water and wastewater infrastructure needs in existing and new colonias along the border with Mexico. Government programs and non-government and private organization projects aim to address these infrastructure needs. Texas Tech University's Water Resources Center demonstrated the use of alternative on-site wastewater treatment in the Green Valley Farms colonia, San Benito, Texas. The work in Green Valley Farms was a component of a NASA-funded project entitled Evaluation of NASA's Advanced Life Support Integrated Water Recovery System for Non-Optimal Conditions and Terrestrial Applications. Two households within the colonia are demonstration sites for constructed wetlands. A colonia resident and activist identified educational opportunities for colonia children as a primary goal for many colonia residents. Colonia parents view education as the door to opportunity and escape from poverty for their children. The educational outreach component of the project in Green Valley Farms was a Science and Space Club for middle-school age students. Involved parents, schoolteachers, and school administrators enthusiastically supported the monthly club meetings and activities. Each month, students participated in interactive learning experiences about water use and reuse in space and on earth. Activities increased knowledge and interest in water resource issues and in science and engineering fields. The Institute for the Development and Enrichment of Advanced Learners (IDEAL) at Texas Tech University provided full scholarships for five students from Green Valley Farms to attend the Shake Hands With Your Future camp at Texas Tech University in June 2003. The educational outreach

  14. Pengaruh Green Marketing Hotel Terhadap Green Consumer Behavior

    OpenAIRE

    Yo Fernandez, Eunike Christe; Tjoanda, Evelyn

    2017-01-01

    Penelitian ini dilakukan untuk mengetahui pengaruh dari green marketing hotel terhadap green consumer behavior. Green marketing memiliki 3 dimensi, yaitu green product, green price, dan green promotion. Penelitian ini melibatkan 272 responden masyarakat Surabaya dan menggunakan metode regresi linear berganda. Hasil penelitian menunjukkan bahwa green product dan green price berpengaruh secara positif dan signifikan sedangkan green promotion berpengaruh namun tidak signifikan terhadap green con...

  15. Pilot-scale technology development, nutritional and consumer assessment of whole-multigrain cookies as influenced by fructan inclusion.

    Science.gov (United States)

    Handa, Chanu; Goomer, Sangeeta; Siddhu, Anupa

    2011-04-01

    The benefits of wholegrain finger millet and sorghum were combined with that of fructan in form of fructoligosaccharide in the pilot-scale production (10 kg) of cookies. Complete nutritional analysis of the cookies was carried out to provide nutritional information to the consumers. Whole-multigrain cookies with fructan can be categorized as "High Fiber" as they suffice 21% daily value (DV) of fiber and a "Good Source" of iron as they suffice 12.8% DV of iron. A total of 300 consumers (M=110 and F=190), aged between 8 and 66 y evaluated cookies. The overall acceptability (OAA) score of 300 consumers was 8.0±0.58 on a 9-point hedonic scale. Females rated cookies significantly (Pconsumers signified ample scope for viability and marketability of cookies at the commercial scale.   Consumers are looking at snack and convenience foods to provide increased fiber in their diet and there is a tremendous interest in low-calorie and low-sugar foods. The demand of whole and multigrain products is also on the rise because of the Government's emphasis. The present study would assist in assessing feasibility of commercial production of such novel health foods. Together with this, it will ascertain the marketability and commercial viability of the product by means of the consumer preference trials. Availability of such cookies in the market would offer consumers "health" with "convenience" and "taste."

  16. Pilot research project of risk communication on nuclear technology and its utilization. Toward communication and collaboration with community

    International Nuclear Information System (INIS)

    Tsuchiya, Tomoko

    2003-01-01

    Although the importance of risk communication has been pointed out over the last decade in nuclear community, both public authorities and nuclear industry have not conducted the definite actions yet. It will be reflected in the public eye that nuclear community's attitude toward communication and consultation with the public about risk issues is half-hearted, comparing with chemical and food safety fields which recently launched their risk communication activities. In this study, we conduct risk communication experiments on some risk issues associated with nuclear technology and its utilization in Tokai village, for the purpose of establishment of risk communication in our society that might be one of the new relationships between science and technology and society. The outcomes of FY2002 study are the following threefold; 1) preparation of risk communication experiments on nuclear technology and its utilization, 2) assessment of social effects of risk communication activities, 3) preparation of practical guidebook for risk communication experiments. (J.P.N.)

  17. Green toxicology.

    Science.gov (United States)

    Maertens, Alexandra; Anastas, Nicholas; Spencer, Pamela J; Stephens, Martin; Goldberg, Alan; Hartung, Thomas

    2014-01-01

    Historically, early identification and characterization of adverse effects of industrial chemicals was difficult because conventional toxicological test methods did not meet R&D needs for rapid, relatively inexpensive methods amenable to small amounts of test material. The pharmaceutical industry now front-loads toxicity testing, using in silico, in vitro, and less demanding animal tests at earlier stages of product development to identify and anticipate undesirable toxicological effects and optimize product development. The Green Chemistry movement embraces similar ideas for development of less toxic products, safer processes, and less waste and exposure. Further, the concept of benign design suggests ways to consider possible toxicities before the actual synthesis and to apply some structure/activity rules (SAR) and in silico methods. This requires not only scientific development but also a change in corporate culture in which synthetic chemists work with toxicologists. An emerging discipline called Green Toxicology (Anastas, 2012) provides a framework for integrating the principles of toxicology into the enterprise of designing safer chemicals, thereby minimizing potential toxicity as early in production as possible. Green Toxicology`s novel utility lies in driving innovation by moving safety considerations to the earliest stage in a chemical`s lifecycle, i.e., to molecular design. In principle, this field is no different than other subdisciplines of toxicology that endeavor to focus on a specific area - for example, clinical, environmental or forensic toxicology. We use the same principles and tools to evaluate an existing substance or to design a new one. The unique emphasis is in using 21st century toxicology tools as a preventative strategy to "design out" undesired human health and environmental effects, thereby increasing the likelihood of launching a successful, sustainable product. Starting with the formation of a steering group and a series of workshops

  18. A Pilot Study of Augmented Reality Technology Applied to the Acetabular Cup Placement During Total Hip Arthroplasty.

    Science.gov (United States)

    Ogawa, Hiroyuki; Hasegawa, Seiichirou; Tsukada, Sachiyuki; Matsubara, Masaaki

    2018-06-01

    We developed an acetabular cup placement device, the AR-HIP system, using augmented reality (AR). The AR-HIP system allows the surgeon to view an acetabular cup image superimposed in the surgical field through a smartphone. The smartphone also shows the placement angle of the acetabular cup. This preliminary study was performed to assess the accuracy of the AR-HIP system for acetabular cup placement during total hip arthroplasty (THA). We prospectively measured the placement angles using both a goniometer and AR-HIP system in 56 hips of 54 patients undergoing primary THA. We randomly determined the order of intraoperative measurement using the 2 devices. At 3 months after THA, the placement angle of the acetabular cup was measured on computed tomography images. The primary outcome was the absolute value of the difference between intraoperative and postoperative computed tomography measurements. The measurement angle using AR-HIP was significantly more accurate in terms of radiographic anteversion than that using a goniometer (2.7° vs 6.8°, respectively; mean difference 4.1°; 95% confidence interval, 3.0-5.2; P < .0001). There was no statistically significant difference in terms of radiographic inclination (2.1° vs 2.6°; mean difference 0.5°; 95% confidence interval, -1.1 to 0.1; P = .13). In this pilot study, the AR-HIP system provided more accurate information regarding acetabular cup placement angle than the conventional method. Further studies are required to confirm the utility of the AR-HIP system as a navigation tool. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. Motion detection technology as a tool for cardiopulmonary resuscitation (CPR) quality training: a randomised crossover mannequin pilot study.

    Science.gov (United States)

    Semeraro, Federico; Frisoli, Antonio; Loconsole, Claudio; Bannò, Filippo; Tammaro, Gaetano; Imbriaco, Guglielmo; Marchetti, Luca; Cerchiari, Erga L

    2013-04-01

    Outcome after cardiac arrest is dependent on the quality of chest compressions (CC). A great number of devices have been developed to provide guidance during CPR. The present study evaluates a new CPR feedback system (Mini-VREM: Mini-Virtual Reality Enhanced Mannequin) designed to improve CC during training. Mini-VREM system consists of a Kinect(®) (Microsoft, Redmond, WA, USA) motion sensing device and specifically developed software to provide audio-visual feedback. Mini-VREM was connected to a commercially available mannequin (Laerdal Medical, Stavanger, Norway). Eighty trainees (healthcare professionals and lay people) volunteered in this randomised crossover pilot study. All subjects performed a 2 min CC trial, 1h pause and a second 2 min CC trial. The first group (FB/NFB, n=40) performed CC with Mini-VREM feedback (FB) followed by CC without feedback (NFB). The second group (NFB/FB, n=40) performed vice versa. Primary endpoints: adequate compression (compression rate between 100 and 120 min(-1) and compression depth between 50 and 60mm); compressions rate within 100-120 min(-1); compressions depth within 50-60mm. When compared to the performance without feedback, with Mini-VREM feedback compressions were more adequate (FB 35.78% vs. NFB 7.27%, p<0.001) and more compressions achieved target rate (FB 72.04% vs. 31.42%, p<0.001) and target depth (FB 47.34% vs. 24.87%, p=0.002). The participants perceived the system to be easy to use with effective feedback. The Mini-VREM system was able to improve significantly the CC performance by healthcare professionals and by lay people in a simulated CA scenario, in terms of compression rate and depth. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  20. Pilot study of mobile phone technology in allergic rhinitis in European countries: the MASK-rhinitis study.

    Science.gov (United States)

    Bousquet, J; Caimmi, D P; Bedbrook, A; Bewick, M; Hellings, P W; Devillier, P; Arnavielhe, S; Bachert, C; Bergmann, K C; Canonica, G W; Chavannes, N H; Cruz, A A; Dahl, R; Demoly, P; De Vries, G; Mathieu-Dupas, E; Finkwagner, A; Fonseca, J; Guldemond, N; Haahtela, T; Hellqvist-Dahl, B; Just, J; Keil, T; Klimek, L; Kowalski, M L; Kuitunen, M; Kuna, P; Kvedariene, V; Laune, D; Pereira, A M; Carreiro-Martins, P; Melén, E; Morais-Almeida, M; Mullol, J; Muraro, A; Murray, R; Nogueira-Silva, L; Papadopoulos, N G; Passalacqua, G; Portejoie, F; Price, D; Ryan, D; Samolinski, B; Sheikh, A; Siroux, V; Spranger, O; Todo Bom, A; Tomazic, P V; Valero, A; Valovirta, E; Valiulis, A; VandenPlas, O; van der Meulen, S; van Eerd, M; Wickman, M; Zuberbier, T

    2017-06-01

    The use of Apps running on smartphones and tablets profoundly affects medicine. The MASK-rhinitis (MACVIA-ARIA Sentinel NetworK for allergic rhinitis) App (Allergy Diary) assesses allergic rhinitis symptoms, disease control and impact on patients' lives. It is freely available in 20 countries (iOS and Android platforms). To assess in a pilot study whether (i) Allergy Diary users were able to properly provide baseline characteristics (ii) simple phenotypic characteristics based upon data captured by the Allergy Diary could be identified and (iii) information gathered by this study could suggest novel research questions. The Allergy Diary users were classified into six groups according to the baseline data that they entered into the App: (i) asymptomatic; (ii) nasal symptoms excluding rhinorrhea; (iii) rhinorrhea; (iv) rhinorrhea plus 1-2 nasal/ocular symptoms; (v) rhinorrhea plus ≥3 nasal/ocular symptoms; and (vi) rhinorrhea plus all nasal/ocular symptoms. By 1 June 2016, 3260 users had registered with the Allergy Diary and 2710 had completed the baseline questionnaire. Troublesome symptoms were found mainly in the users with the most symptoms. Around 50% of users with troublesome rhinitis and/or ocular symptoms suffered work impairment. Sleep was impaired by troublesome symptoms and nasal obstruction. This is the first App (iOS and Android) to have tested for allergic rhinitis and conjunctivitis. A simple questionnaire administered by cell phones enables the identification of phenotypic differences between a priori defined rhinitis groups. The results suggest novel concepts and research questions in allergic rhinitis that may not be identified using classical methods. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  1. A pilot study to evaluate the application of a generic protein standard panel for quality control of biomarker detection technologies

    Directory of Open Access Journals (Sweden)

    Valdivia Hernan J

    2011-08-01

    Full Text Available Abstract Background Protein biomarker studies are currently hampered by a lack of measurement standards to demonstrate quality, reliability and comparability across multiple assay platforms. This is especially pertinent for immunoassays where multiple formats for detecting target analytes are commonly used. Findings In this pilot study a generic panel of six non-human protein standards (50 - 10^7 pg/mL of varying abundance was prepared as a quality control (QC material. Simulated "normal" and "diseased" panels of proteins were prepared in pooled human plasma and incorporated into immunoassays using the Meso Scale Discovery® (MSD® platform to illustrate reliable detection of the component proteins. The protein panel was also evaluated as a spike-in material for a model immunoassay involving detection of ovarian cancer biomarkers within individual human plasma samples. Our selected platform could discriminate between two panels of the proteins exhibiting small differences in abundance. Across distinct experiments, all component proteins exhibited reproducible signal outputs in pooled human plasma. When individual donor samples were used, half the proteins produced signals independent of matrix effects. These proteins may serve as a generic indicator of platform reliability. Each of the remaining proteins exhibit differential signals across the distinct samples, indicative of sample matrix effects, with the three proteins following the same trend. This subset of proteins may be useful for characterising the degree of matrix effects associated with the sample which may impact on the reliability of quantifying target diagnostic biomarkers. Conclusions We have demonstrated the potential utility of this panel of standards to act as a generic QC tool for evaluating the reproducibility of the platform for protein biomarker detection independent of serum matrix effects.

  2. A new impulse-stage sand fracturing technology and its pilot application in the western Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Bin Qi

    2015-03-01

    Full Text Available A better placement of proppants has been always the goal pursued in sand fracturing in order to get longer effective fractures and higher flow conductivity. However, it is always difficult to achieve satisfactory effects by conventional processes. On the basis of theoretical analysis and simulation with FracproPT software, basic experiments, and innovative physical modeling experiment, a new impulse-stage fracturing process has been developed by combining a special pumping process with fiber, liquid and other auxiliary engineering means. Compared with conventional fracturing, the open seepage channel created by the new fracturing process has an obvious edge in effective fracture length and flow conductivity. Moreover, the open seepage channel can also improve fracture cleanliness and reduce pressure loss in artificial fractures, thus reaching the goal of prolonging the single-well production time and maximizing productivity. After the research on principles and optimal design of this new process, on-site pilot test and detailed post-fracturing evaluation were conducted. The results indicated that (1 the new process is highly operable and feasible; (2 compared with the adjacent wells with similar geological conditions, the proppant' cost is reduced by 44%–47%, the ratio of effective fracture length to propped fracture length is increased by about 16%, the fracturing fluid recovery rate is up to 63% after 18 h in the test, and the normalized production is 1.9–2.3 times that of the adjacent wells; and (3 the new process can significantly lower the cost and enhance production. The process has a broad application prospect in shallow-middle sand gas reservoirs and shale gas reservoirs in western Sichuan Basin.

  3. Greens of the European Green Capitals

    Science.gov (United States)

    Cömertler, Seval

    2017-10-01

    Well established and maintained green areas have a key role on reaching the high quality of life and sustainability in urban environments. Therefore, green areas must be carefully accounted and evaluated in the urban planning affairs. In this context, the European Green Capitals, which attach a great importance to the green areas, have a great potential to act as a role model for both small and big cities in all around the world. These leading cities (chronologically, Stockholm, Hamburg, Vitoria-Gasteiz, Nantes, Copenhagen, Bristol, Ljubljana, Essen and Nijmegen) are inspiring for the other cities which seek to achieve more sustainable and environmentally friendly places through green areas. From this point of view, the aim of this paper was to investigate the green areas of the European Green Capitals. The paper covered whole European Green Capitals, and the application form of each Green Capital was used as a primary data source. Consequently, the paper put forwarded that the European Green Capitals have considerably large amount and high proportion of green areas. Further, these cities provide an excellent access to the public green areas. As a result of abundant provision and proper distribution, the almost all citizens in most of the Green Capitals live within a distance of 300 meters to a green area. For further researches, the paper suggested that these green capitals should be investigated in terms of their efforts, measures, goals and plans, policies and implications to administer, to protect, to enhance and to expand the green areas.

  4. Determinants of Green Innovation: The Impact of Internal and External Knowledge

    OpenAIRE

    Stucki, Tobias; Wörter, Martin

    2012-01-01

    Based on a comprehensive data set comprising 13 countries, 22 industries and a period of 30 years we investigate the impact of internal and external knowledge pools of both green and 'other than green' technologies on green patent activities. It turned out that the internal green knowledge stock is positively related to green patent activities with a considerably large marginal value. The country's green knowledge stock and the green knowledge stock of the same industry in other countries are...

  5. Towards green construction

    International Nuclear Information System (INIS)

    Bajracharya, Bijaya B.; Shrestha, Prasanna M.

    2000-01-01

    Sustainability is the key to any development works. In the operation phase, hydro power is the most sustainable form of energy. However construction activities for the same power station are usually far from being green. The popular myth is that construction activity converts green into grey. Despite this popular myth, construction of a hydro power project in Nepal has made the project area greener than earlier during the construction phase itself. Choice of construction technology, appropriate level of environmental impact assessment, monitoring of environmental parameters along side the construction progress followed by mitigation at the right time; launching community development programmes side by side, having environmental specification in contractual documents and self-reliance to fulfill environmental obligations by contractors itself are the key factors in the environmental management within the construction activities. The main conclusions in the paper is the need to change the way to think about the project constraints

  6. The Detroit Young Adult Asthma Project: Pilot of a Technology-Based Medication Adherence Intervention for African-American Emerging Adults.

    Science.gov (United States)

    Kolmodin MacDonell, Karen; Naar, Sylvie; Gibson-Scipio, Wanda; Lam, Phebe; Secord, Elizabeth

    2016-10-01

    To conduct a randomized controlled pilot of a multicomponent, technology-based intervention promoting adherence to controller medication in African-American emerging adults with asthma. The intervention consisted of two computer-delivered sessions based on motivational interviewing combined with text messaged reminders between sessions. Participants (N = 49) were 18-29 years old, African-American, with persistent asthma requiring controller medication. Participants had to report poor medication adherence and asthma control. Youth were randomized to receive the intervention or an attention control. Data were collected through computer-delivered self-report questionnaires at baseline, 1, and 3 months. Ecological Momentary Assessment via two-way text messaging was also used to collect "real-time" data on medication use and asthma control. The intervention was feasible and acceptable to the target population, as evidenced by high retention rates and satisfaction scores. Changes in study outcomes from pre- to postintervention favored the intervention, particularly for decrease in asthma symptoms, t (42) = 2.22, p < .05 (Cohen's d = .071). Results suggest that the intervention is feasible and effective. However, findings are preliminary and should be replicated with a larger sample and more sophisticated data analyses. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  7. Using New Technologies for Time Diary Data Collection: Instrument Design and Data Quality Findings from a Mixed-Mode Pilot Survey.

    Science.gov (United States)

    Chatzitheochari, Stella; Fisher, Kimberly; Gilbert, Emily; Calderwood, Lisa; Huskinson, Tom; Cleary, Andrew; Gershuny, Jonathan

    2018-01-01

    Recent years have witnessed a steady growth of time-use research, driven by the increased research and policy interest in population activity patterns and their associations with long-term outcomes. There is recent interest in moving beyond traditional paper-administered time diaries to use new technologies for data collection in order to reduce respondent burden and administration costs, and to improve data quality. This paper presents two novel diary instruments that were employed by a large-scale multi-disciplinary cohort study in order to obtain information on the time allocation of adolescents in the United Kingdom. A web-administered diary and a smartphone app were created, and a mixed-mode data collection approach was followed: cohort members were asked to choose between these two modes, and those who were unable or refused to use the web/app modes were offered a paper diary. Using data from a pilot survey of 86 participants, we examine diary data quality indicators across the three modes. Results suggest that the web and app modes yield an overall better time diary data quality than the paper mode, with a higher proportion of diaries with complete activity and contextual information. Results also show that the web and app modes yield a comparable number of activity episodes to the paper mode. These results suggest that the use of new technologies can improve diary data quality. Future research using larger samples should systematically investigate selection and measurement effects in mixed-mode time-use survey designs.

  8. Technology-assisted language intervention for children who are deaf or hard-of-hearing; a pilot study of augmentative and alternative communication for enhancing language development.

    Science.gov (United States)

    Meinzen-Derr, Jareen; Wiley, Susan; McAuley, Rose; Smith, Laura; Grether, Sandra

    2017-11-01

    Pilot study to assess the effect of augmentative and alternative communication technology to enhance language development in children who are deaf or hard-of-hearing. Five children ages 5-10 years with permanent bilateral hearing loss who were identified with language underperformance participated in an individualized 24-week structured program using the application TouchChat WordPower on iPads ® . Language samples were analyzed for changes in mean length of utterance, vocabulary words and mean turn length. Repeated measures models assessed change over time. The baseline median mean length of utterance was 2.41 (range 1.09-6.63; mean 2.88) and significantly increased over time (p = 0.002) to a median of 3.68 at final visit (range 1.97-6.81; mean 3.62). At baseline, the median total number of words spoken per language sample was 251 (range 101-458), with 100 (range 36-100) different words spoken. Total words and different words significantly increased over time (β = 26.8 (7.1), p = 0.001 for total words; β = 8.0 (2.7), p = 0.008 for different words). Mean turn length values also slightly increased over time. Using augmentative and alternative communication technology on iPads ® shows promise in supporting rapid language growth among elementary school-age children who are deaf or hard-of-hearing with language underperformance.

  9. Experiments and Pilot Study Evaluating the Performance of Reading Miscue Detector and Automated Reading Tutor for Filipino: A Children's Speech Technology for Improving Literacy

    Directory of Open Access Journals (Sweden)

    Ronald M. Pascual

    2017-06-01

    Full Text Available The latest advances in speech processing technology have allowed the development of automated reading tutors (ART for improving children's literacy. An ART is a computer-assisted learning system based on oral reading fluency (ORF instruction and automated speech recognition (ASR technology. However, the design of an ART system is language-specif ic, and thus, requires developing a system specif ically for the Filipino language. In a previous work, the authors have presented the development of the children's Filipino speech corpus (CFSC for the purpose of designing an ART in Filipino. In this paper, the authors present the evaluation of the ART in Filipino which integrates a reference verification (RV- and word duration analysis-based reading miscue detector (RMD, a user interface, and a feedback and instruction set. The authors also present the performance evaluation of the RMD in offline tests, and the effectiveness of the ART as shown by the results of the intervention program, a month-long pilot study that involved the use of the ART by a small group of students. Offline test results show that the RMD's performance (i.e., FA rate ≈ 3% and MDerr rate ≈ 5% is at par with those from state-of-the-art RMDs reported in the literature. The results of the ART intervention experiment showed that the students, on the average, have improved in their words correct per minute (WCPM rate by 4.66 times, in their ORF-16 scores by 6.0 times, and in their reading comprehension exam scores by 4.4 times, after using the ART.

  10. Green urbanity

    Directory of Open Access Journals (Sweden)

    Alenka Fikfak

    2012-01-01

    Full Text Available Tourism and other culture-based types of small business, which are the leitmotif in the planning of the Europark Ruardi, are becoming the guiding motif in the spatial development of urban centres that are influenced by dynamic transformation processes. The system should build upon the exploitation of both local and regional environmental features. This would encourage the quest for special environmental features, with an emphasis on their conservation, i.e. sustainable development, and connections in a wider context.The Europark is seen as a new strategic point of the Zasavje Region (the region of the central Sava Valley, which is linked to other important points in a region relevant for tourism. Due to the "smallness" of the region and/or the proximity of such points, development can be fast and effective. The interaction of different activities in space yields endless opportunities for users, who choose their own goals and priorities in the use of space. Four theme areas of the Europark area planning are envisaged. The organisation of activities is based on the composition of the mosaic field patterns, where green fields intertwine with areas of different, existing and new, urban functions. The fields of urban and recreation programmes are connected with a network of green areas and walking trails, along which theme park settings are arranged.

  11. Green shipping management

    CERN Document Server

    Lun, Y H Venus; Wong, Christina W Y; Cheng, T C E

    2016-01-01

    This book presents theory-driven discussion on the link between implementing green shipping practices (GSP) and shipping firm performance. It examines the shipping industry’s challenge of supporting economic growth while enhancing environmental performance. Consisting of nine chapters, the book covers topics such as the conceptualization of green shipping practices (GSPs), measurement scales for evaluating GSP implementation, greening capability, greening and performance relativity (GPR), green management practice, green shipping network, greening capacity, and greening propensity. In view of the increasing quest for environment protection in the shipping sector, this book provides a good reference for firms to understand and evaluate their capability in carrying out green operations on their shipping activities.

  12. From green architecture to architectural green

    DEFF Research Database (Denmark)

    Earon, Ofri

    2011-01-01

    that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

  13. Pilot implementation

    DEFF Research Database (Denmark)

    Hertzum, Morten; Bansler, Jørgen P.; Havn, Erling C.

    2012-01-01

    A recurrent problem in information-systems development (ISD) is that many design shortcomings are not detected during development, but first after the system has been delivered and implemented in its intended environment. Pilot implementations appear to promise a way to extend prototyping from...... the laboratory to the field, thereby allowing users to experience a system design under realistic conditions and developers to get feedback from realistic use while the design is still malleable. We characterize pilot implementation, contrast it with prototyping, propose a iveelement model of pilot...... implementation and provide three empirical illustrations of our model. We conclude that pilot implementation has much merit as an ISD technique when system performance is contingent on context. But we also warn developers that, despite their seductive conceptual simplicity, pilot implementations can be difficult...

  14. Green Power Marketing in Retail Competition: An Early Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wiser, R. (LBL); Fang, J.; Porter, K.; Houston, A. (NREL)

    1999-02-26

    Green power marketing-the business of selling electricity products or services based in part on their environmental values-is still in an early stage of development. This Topical Issues Brief presents a summary of early results with green power marketing under retail competition, covering both fully competitive markets and relevant direct access pilot programs. The brief provides an overview of green products that are or were offered, and discusses consumers' interest in these products. Critical issues that will impact the availability and success of green power products under retail competition are highlighted.

  15. Green Power Marketing in Retail Competition: An Early Assessment

    International Nuclear Information System (INIS)

    Kevin Porter; Ryan Wiser

    1999-01-01

    Green power marketing-the business of selling electricity products or services based in part on their environmental values-is still in an early stage of development. This Topical Issues Brief presents a summary of early results with green power marketing under retail competition, covering both fully competitive markets and relevant direct access pilot programs. The brief provides an overview of green products that are or were offered, and discusses consumers' interest in these products. Critical issues that will impact the availability and success of green power products under retail competition are highlighted

  16. Green fiber bottle: Towards a sustainable package

    DEFF Research Database (Denmark)

    Didone, Mattia; Tosello, Guido; Howard, Thomas J.

    The Green Fiber Bottle is a fully biodegradable bottle made from molded paper pulp.Its development depends on the establishment of the manufacturing technology. Impulse drying, an innovative way of drying, has the potential to improve significantly the manufacturing process of the Green Fiber Bot...... Bottle, towards a sustainable packaging...

  17. Development of a technology and a pilot plant for treatment of small volumes of liquid radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Stefanova, I G; Gradev, G D [Bulgarian Academy of Sciences, Sofia (Bulgaria). Inst. for Nuclear Research and Nuclear Energy

    1997-02-01

    The development of technology for treatment of liquid radioactive waste is described. Waste arisings are estimated. Liquid wastes of concern are mainly low active wastes according to the Bulgarian legislation. The activity is determined by the presence of {sup 134}Cs, {sup 137}Cs, {sup 60}Co, {sup 90}Sr, {sup 144}Ce, {sup 65}Zc, {sup 54}Mn, {sup 110m}Ag. Different precipitation processes are compared. The mixed iron hydroxide - calcium phosphate precipitation is determined as suitable for decontamination of the liquid radioactive waste. Effective decontamination is achieved when precipitation is followed by ion exchange. Additional increase of the decontamination is possible when sorbents are added during the precipitation step. The sorption and desorption of radionuclides on zeolites are studied. Cement solidification and thermal treatment of zeolites are studied for immobilization of radioactive material from precipitation and ion exchange. Both methods produce stable waste forms suitable for containment of the radionuclides. (author). 17 refs, 3 figs, 12 tabs.

  18. Contribution of information and communication technologies in education and training in radiation protection: feedback of ENETRAP pilot e-learning course and perspective

    International Nuclear Information System (INIS)

    Livolsi, Paul; Marco Arboli, Marisa; Llorente Herranz, Cristina; Rodriguez, Monica; Michel, Xavier; Balosso, Jacques

    2008-01-01

    Full text: In the Framework of European ENETRAP project, a Radiation Protection pilot course using Information and Communication Technologies (ICT) and cooperative tools has been proposed to students of the French Master in Radiation Protection, in October 2007. The objectives and purposes are to introduce ICT in order to improve the Education and Training (E and T) in Radiation Protection by facilitating on the one hand the access to resources and services, and on the other hand, the exchanges and collaborative works between learners and teachers. The use of Open and Distance Learning (ODL) is one of the means to ensure the future supply of appropriately educated and skilled personnel for those who use ionising radiations across Europe and secondly, to meet the increasing demand and decreasing number of radiation protection experts available in Europe. Open and Distance Learning contributes to promote mobility of workers and students throughout the European countries where students can be taught at 'Anytime, anyplace, anywhere'. Assessment of this pilot course points out the benefits and inconveniences of such pedagogical approach in the Radiation Protection domain. This new approach has been considered attractive and efficient by students for topics such as radioactivity, interaction of radiation with matter. Students feel more involved in their own training by learning topics whenever they want, at their own rhythm. Concerning the content, an improvement has to be implemented by integrating Rich Media contents (video, sound, simulation, flash animation) and a more efficient track of the knowledge by a tutor. A full complete distance learning seems not to be the best way, because students need to exchange in a face to face period, with teachers, lecturers and tutors. A blended learning (b-learning) is preferred by proposing various pedagogical sequences such as face to face, e-learning, case studies and simulation activities. This distance learning approach could

  19. Dangerous assumptions : the agroecology and ethnobiology of traditional polyculture cassava systems in rural Cameroon and implications of green revolution technologies for sustainability, food security, and rural welfare

    NARCIS (Netherlands)

    Nchang Ntumngia, R.

    2010-01-01

    The Alliance for a New Green Revolution in Africa and African government and
    CGIAR programmes oriented toward improving cassava production through intensification
    and the use of external inputs have the ultimate goals to improve food production, promote
    market integration, and

  20. Achievement report for fiscal 1982 on Sunshine Program. Research and development of coal liquefaction technology (Conceptual designs for coal liquefaction pilot plants - Solvent extraction liquefaction process); 1982 nendo sekitan ekika gijutsu no kenkyu kaihatsu seika hokokusho. Sekitan ekika pilot plant no gainen sekkei (yozai chushutsu ekikaho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1983-03-01

    This research aims to prepare conceptual designs for a 250t/d-class and 500t/d-class coal liquefaction pilot plants based on the achievement of research on solvent extraction liquefaction of coal. It also aims to define the solvent extraction process and provide decision-making material relative to the development and promotion of coal liquefaction technologies in the future. Development started in 1978 of the technology of solvent extraction liquefaction of coal, and a 1t/d PDU (process development unit) was completed in 1981. Studies through its operation have continued for more than 3000 hours already, and technical data are being accumulated steadily. Techniques acquired through operating the 1t/d PDU have been put together, and rough process conditions are established. A rough process result is achieved of the same conditions. In these two respects, the newly developed process is equal to other processes. The phenomena in this process are roughly grasped. It is deemed that, with the existing technique combined with the technique acquired here, a technological level has been reached where conceptual designs of large pilot plants may be worked out for solvent extraction liquefaction of coal. Under the circumstances, with a view to developing a commercial plant whose main products will be fuel oils, conceptual designs are prepared for large pilot plants, and are compiled into this report. (NEDO)

  1. Are Virtual Rehabilitation Technologies Feasible Models to Scale an Evidence-Based Fall Prevention Program? A Pilot Study Using the Kinect Camera.

    Science.gov (United States)

    Shubert, Tiffany E; Basnett, Jeanna; Chokshi, Anang; Barrett, Mark; Komatireddy, Ravi

    2015-11-05

    Falls in older adults are a significant public health issue. Interventions have been developed and proven effective to reduce falls in older adults, but these programs typically last several months and can be resource intensive. Virtual rehabilitation technologies may offer a solution to bring these programs to scale. Off-the-shelf and custom exergames have demonstrated to be a feasible adjunct to rehabilitation with older adults. However, it is not known if older adults will be able or willing to use a virtual rehabilitation technology to participate in an evidence-based fall prevention program. To have the greatest impact, virtual rehabilitation technologies need to be acceptable to older adults from different backgrounds and level of fall risk. If these technologies prove to be a feasible option, they offer a new distribution channel to disseminate fall prevention programs. Stand Tall (ST) is a virtual translation of the Otago Exercise Program (OEP), an evidence-based fall prevention program. Stand Tall was developed using the Virtual Exercise Rehabilitation Assistant (VERA) software, which uses a Kinect camera and a laptop to deliver physical therapy exercise programs. Our purpose in this pilot study was to explore if ST could be a feasible platform to deliver the OEP to older adults from a variety of fall risk levels, education backgrounds, and self-described level of computer expertise. Adults age 60 and over were recruited to participate in a one-time usability study. The study included orientation to the program, navigation to exercises, and completion of a series of strength and balance exercises. Quantitative analysis described participants and the user experience. A diverse group of individuals participated in the study. Twenty-one potential participants (14 women, 7 men) met the inclusion criteria. The mean age was 69.2 (± 5.8) years, 38% had a high school education, 24% had a graduate degree, and 66% classified as "at risk for falls". Eighteen

  2. Green business will remain green

    International Nuclear Information System (INIS)

    Marcan, P.

    2008-01-01

    It all started with two words. Climate change. The carbon dioxide trading scheme, which was the politicians' idea on solving the number one global problem, followed. Four years ago, when the project was begun, there was no data for project initiation. Quotas for polluters mainly from energy production and other energy demanding industries were distributed based on spreadsheets, maximum output and expected future development of economies. Slovak companies have had a chance to profit from these arrangements since 2005. Many of them took advantage of the situation and turned the excessive quotas into an extraordinary profit which often reached hundreds of million Sk. The fact that the price of free quotas offered for sale dropped basically to 0 in 2006 only proved that the initial distribution was too generous. And the market reacted to the first official measurements of emissions. Slovak companies also contributed to this development. However, when planning the maximum emission volumes for 2008-2012 period, in spite of the fact that actual data were available, their expectations were not realistic. A glance at the figures in the proposal of the Ministry of Environment is sufficient to realize that there will be no major change in the future. And so for many Slovak companies business with a green future will remain green for the next five years. The state decided to give to selected companies even more free space as far as emissions are concerned. The most privileged companies can expect quotas increased by tens of percent. (author)

  3. Green Power Partner Resources

    Science.gov (United States)

    EPA Green Power Partners can access tools and resources to help promote their green power commitments. Partners use these tools to communicate the benefits of their green power use to their customers, stakeholders, and the general public.

  4. Green Vehicle Guide

    Science.gov (United States)

    ... label Buy green. Save green. Learn about MPG math Discover fuel-saving tips Promote green ... U.S. consumers who have already purchased new vehicles under the fuel economy & greenhouse gas standard! More about the standards » Check ...

  5. FY 1994 report on the results of the project supplementary to the New Sunshine Project - Development of the coal utilization hydrogen production technology. Ninth year - Part 2. Study using a pilot plant (Design/construction/operation study of the pilot plant and the dismantling study); 1994 nendo New Sunshine keikaku hojo jigyo Dai 9 nenji bun seika hokokusho - 2. Sekitan riyo suiso seizo gijutsu kaihatsu - Pilot plant ni yoru kenkyu (Pilot plant no sekkei kensetsu unten kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    In the R and D of the high temperature coal gasification technology by the entrained bed system which is the core technology of the coal utilization hydrogen production technology, the paper carried out the dismantling study of pilot plant and the summarization of the results. About the summarization of the results, as the results of the HYCOL operation study, there were insufficiencies in expansion of the coal kind used and acquisition of scale-up data, but it was verified that the conceptual design of the HYCOL method was fully applicable to the higher gasification efficiency, higher reliability, adaptability to many kinds of coal and compactness of facilities (low construction cost) which were the final subjects for the realization of commercial plant. This was highly evaluated. Especially, the greatest characteristic of the HYCOL method is the freedom in selection of temperature difference between the upper stage and lower stage, that is, temperatures can be controlled to temperatures they want in each of the upper stage and lower stage in the one-chamber gasifier according to coal properties and slagging control. The verification of this freedom was the base of the total results. Moreover, a reputation was being made that the gasification efficiency and process reliability are at the world's highest level. (NEDO)

  6. Summary report for the WIPP [Waste Isolation Pilot Plant] technology development program for isolation of radioactive waste

    International Nuclear Information System (INIS)

    Tyler, L.D.; Matalucci, R.V.; Molecke, M.A.; Munson, D.E.; Nowak, E.J.; Stormont, J.C.

    1988-04-01

    The technology experiments have been managed in three broad categories: Thermal/Structural Interactions (TSI), Plugging and Sealing Performance and Design (PandS), and Waste Package Performance (WPP). The history and major progress in each of these areas is summarized in this report. The TSI program has established the fact that the WIPP salt creep rate, and therefore closure of WIPP rooms, is about three times more rapid than our best models predicted prior to the tests. Studies to resolve this discrepancy are well advanced; in the interim, good agreement between predicitions and observation is obtained by empirical adjustment of the elastic constants. The closure of backfilled waste room to about five percent void volume is predicted to take less than 100 years, the time during which active controls may be assumed to prevent human intrusion. The waste package program has revealed that migration of interstitial brine to excavations in the WIPP salt occurs at a significantly greater rate than assumed by earlier investigations. A satisfactory model to explain the data utilizes darcy flow in very low permeability salt which is driven by a pore pressure gradient caused when the excavation creates an atmospheric pressure boundary. This model, coupled with room closure predictions and backfill design using a salt/bentonite clay mixture, indicates that the rate of brine seepage will not result in a fluid or slurry state in the room, but rather in a compacted solid. 373 refs., 20 figs., 9 tabs

  7. Green Transformational Leadership and Green Performance: The Mediation Effects of Green Mindfulness and Green Self-Efficacy

    Directory of Open Access Journals (Sweden)

    Yu-Shan Chen

    2014-09-01

    Full Text Available No prior literature explores the influence of green transformational leadership on green performance, thus, this study develops a novel research framework to fill the research gap. This study investigates the influence of green transformational leadership on green performance and discusses the mediation effects of green mindfulness and green self-efficacy by means of structural equation modeling (SEM. The results indicate that green transformational leadership positively influences green mindfulness, green self-efficacy, and green performance. Moreover, this study demonstrates that the positive relationship between green transformational leadership and green performance is partially mediated by the two mediators: green mindfulness and green self-efficacy. It means that green transformational leadership can not only directly affect green performance positively but also indirectly affect it positively through green mindfulness and green self-efficacy. Therefore, firms need to raise their green transformational leadership, green mindfulness, and green self-efficacy to increase their green performance.

  8. The GreenLab Research Facility: A Micro-Grid Integrating Production, Consumption and Storage of Clean Energy

    Science.gov (United States)

    McDowell Bomani, Bilal Mark; Elbuluk, Malik; Fain, Henry; Kankam, Mark D.

    2012-01-01

    There is a large gap between the production and demand for energy from alternative fuel and alternative renewable energy sources. The NASA Glenn Research Center (GRC) has initiated a laboratory-pilot study that concentrates on using biofuels as viable alternative fuel resources for the field of aviation, as well as, utilizing wind and solar technologies as alternative renewable energy resources, and in addition, the use of pumped water for storage of energy that can be retrieved through hydroelectric generation. This paper describes the GreenLab Research Facility and its power and energy sources with .recommendations for worldwide expansion and adoption of the concept of such a facility

  9. Large Pilot CAER Heat Integrated Post-combustion CO2 Capture Technology for Reducing the Cost of Electricity

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Kunlei [Univ. of Kentucky Research Foundation, Lexington, KY (United States); Nikolic, Heather [Univ. of Kentucky Research Foundation, Lexington, KY (United States); Placido, Andrew [Univ. of Kentucky Research Foundation, Lexington, KY (United States); Richburg, Lisa [Univ. of Kentucky Research Foundation, Lexington, KY (United States); Thompson, Jesse [Univ. of Kentucky Research Foundation, Lexington, KY (United States)

    2017-10-20

    The goal of this final project report is to comprehensively summarize the work conducted on project DE-FE0026497. In accordance with the Statement of Project Objectives (SOPO), the University of Kentucky Center for Applied Energy Research (UKy-CAER) (Recipient) has developed an advanced, versatile, 10 MWe post-combustion CO2 capture system (CCS) for a coal-fired power plant, Louisville Gas and Electric Company’s Trimble County Generating Station, using a heat integrated process combined with two-stage stripping and any advanced solvent to enhance the CO2 absorber performance. The proposed project (Phase 1 and 2) will involve the design, fabrication, installation and testing of a large pilot scale facility that will demonstrate the UKy-CAER innovative carbon capture system integrated with an operating supercritical power plant. Specifically during Phase 1, the Recipient has provided all necessary documentation to support its Phase 2 down-selection including: the Project Narrative, the updated Project Management Plan (PMP), the preliminary engineering design, the Technical and Economic Analysis report (TEA) (including the Case 12 – Major Equipment List and submitted as a Topical Report), a Phase 1 Technology Gap Analysis (TGA), an Environmental Health and Safety (EH&S) Assessment on the 10 MWe unit, and updated Phase 2 cost estimates (including the detailed design, procurement, construction, operation, and decommissioning costs) with a budget justification. Furthermore, the Recipient has proposed a combined modular and freestanding column configuration with an advanced absorber gas/liquid distribution system, an advanced solvent, with the integration of discrete packing, a smart cross-over heat exchanger, and a load and ambient condition following control strategy, all to address ten of 12 technology gaps identified during the Phase I work. If successful, the proposed heat integrated post-combustion CCS will pave the way to achieve the

  10. Green Cloud Computing: A Literature Survey

    Directory of Open Access Journals (Sweden)

    Laura-Diana Radu

    2017-11-01

    Full Text Available Cloud computing is a dynamic field of information and communication technologies (ICTs, introducing new challenges for environmental protection. Cloud computing technologies have a variety of application domains, since they offer scalability, are reliable and trustworthy, and offer high performance at relatively low cost. The cloud computing revolution is redesigning modern networking, and offering promising environmental protection prospects as well as economic and technological advantages. These technologies have the potential to improve energy efficiency and to reduce carbon footprints and (e-waste. These features can transform cloud computing into green cloud computing. In this survey, we review the main achievements of green cloud computing. First, an overview of cloud computing is given. Then, recent studies and developments are summarized, and environmental issues are specifically addressed. Finally, future research directions and open problems regarding green cloud computing are presented. This survey is intended to serve as up-to-date guidance for research with respect to green cloud computing.

  11. Alternative Solvents through Green Chemistry Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The purpose of this project is to develop state-of-the-art, green precision cleaning technologies for NASA’s 21st Century Launch Complex thus eliminating...

  12. Central Region Green Infrastructure

    Data.gov (United States)

    Minnesota Department of Natural Resources — This Green Infrastructure data is comprised of 3 similar ecological corridor data layers ? Metro Conservation Corridors, green infrastructure analysis in counties...

  13. Challenges of green chemistry in Ukraine

    Directory of Open Access Journals (Sweden)

    Shevtsova Ganna Ziyvna

    2017-06-01

    Full Text Available The article deals with study of Ukrainian chemical enterprises’ ecologisation issues and elaboration of the economic problems to realize principles of green chemistry. Theoretical aspects of green chemistry as a modern interdisciplinary conception, which reveals peculiarities to implement sustainable development paradigm in the chemical industry, are studied. Based on the analysis of essence and effectiveness to introduce international initiatives on sustainable development at the chemical industry enterprises, it is concluded that the implemented measures are only first steps on the way to realize key principles of green chemistry.It is proved that in order to promote conceptual ideas of the green chemistry further, it is reasonable to consider economic and marketing aspects of the ecological innovations: to provide economic effectiveness of green chemical products and technologies, to form ecological culture of consumption, to motivate green demand and to prevent market asymmetry of information.

  14. The Hayes principles: learning from the national pilot of information technology and core generalisable theory in informatics.

    Science.gov (United States)

    de Lusignan, Simon; Krause, Paul

    2010-01-01

    There has been much criticism of the NHS national programme for information technology (IT); it has been an expensive programme and some elements appear to have achieved little. The Hayes report was written as an independent review of health and social care IT in England. To identify key principles for health IT implementation which may have relevance beyond the critique of NHS IT. We elicit ten principles from the Hayes report, which if followed may result in more effective IT implementation in health care. They divide into patient-centred, subsidiarity and strategic principles. The patient-centred principles are: 1) the patient must be at the centre of all information systems; 2) the provision of patient-level operational data should form the foundation - avoid the dataset mentality; 3) store health data as close to the patient as possible; 4) enable the patient to take a more active role with their health data within a trusted doctor-patient relationship. The subsidiarity principles set out to balance the local and health-system-wide needs: 5) standardise centrally - patients must be able to benefit from interoperability; 6) provide a standard procurement package and an approved process that ensures safety standards and provision of interoperable systems; 7) authorise a range of local suppliers so that health providers can select the system best meeting local needs; 8) allow local migration from legacy systems, as and when improved functionality for patients is available. And finally the strategic principles: 9) evaluate health IT systems in terms of measureable benefits to patients; 10) strategic planning of systems should reflect strategic goals for the health of patients/the population. Had the Hayes principles been embedded within our approach to health IT, and in particular to medical record implementation, we might have avoided many of the costly mistakes with the UK national programme. However, these principles need application within the modern IT

  15. Green roofs: potential at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco, Elena M [Los Alamos National Laboratory

    2009-01-01

    Green roofs, roof systems that support vegetation, are rapidly becoming one of the most popular sustainable methods to combat urban environmental problems in North America. An extensive list of literature has been published in the past three decades recording the ecological benefits of green roofs; and now those benefits have been measured in enumerated data as a means to analyze the costs and returns of green roof technology. Most recently several studies have made substantial progress quantifying the monetary savings associated with storm water mitigation, the lessoning of the Urban Heat Island, and reduction of building cooling demands due to the implementation of green roof systems. Like any natural vegetation, a green roof is capable of absorbing the precipitation that falls on it. This capability has shown to significantly decrease the amount of storm water runoff produced by buildings as well as slow the rate at which runoff is dispensed. As a result of this reduction in volume and velocity, storm drains and sewage systems are relieved of any excess stress they might experience in a storm. For many municipalities and private building owners, any increase in storm water mitigation can result in major tax incentives and revenue that does not have to be spent on extra water treatments. Along with absorption of water, vegetation on green roofs is also capable of transpiration, the process by which moisture is evaporated into the air to cool ambient temperatures. This natural process aims to minimize the Urban Heat Island Effect, a phenomenon brought on by the dark and paved surfaces that increases air temperatures in urban cores. As the sun distributes solar radiation over a city's area, dark surfaces such as bitumen rooftops absorb solar rays and their heat. That heat is later released during the evening hours and the ambient temperatures do not cool as they normally would, creating an island of constant heat. Such excessively high temperatures induce heat

  16. Liverpool Telecare Pilot: case studies

    Directory of Open Access Journals (Sweden)

    Nigel Barnes

    2006-09-01

    Full Text Available Telecare services use information and communications technology (ICT to support the provision of care to people in their own homes. This paper describes a pilot telecare service employed by Liverpool (UK City Council to support a sample of their frail and elderly social services users. The pilot has been running for over two years and has been deployed for 21 individuals in Liverpool. In this paper we present the pilot system and provide real example cases which help to illustrate the benefits of such a system.

  17. Cost Analysis of a Transition to Green Vehicle Technology for Light Duty Fleet Vehicles in Public Works Department Naval Support Activity Monterey (PWD Monterey)

    Science.gov (United States)

    2015-12-01

    price of the hybrid vehicle. Many consumers will view the idea of paying more initially to save on gasoline costs down the road as not worthwhile...braking and electricity generation from an ICE. Similar to the HEV, upon purchase of a PHEV, the consumer may take advantage of the green vehicle tax ... electric cards and Hybrids? (2015, November 3). Retrieved from Plug’n Drive website: https://www.plugndrive.ca/whats- the-difference-between- electric - cars

  18. Presidential Green Chemistry Challenge: 2004 Greener Reaction Conditions Award

    Science.gov (United States)

    Presidential Green Chemistry Challenge 2004 award winner, Buckman Laboratories International, developed Optimyze technology, which uses an esterase enzyme to remove sticky contaminants from paper products prior to recycling.

  19. Presidential Green Chemistry Challenge: 2007 Greener Reaction Conditions Award

    Science.gov (United States)

    Presidential Green Chemistry Challenge 2007 award winner, Headwaters Technology Innovation, developed a metal nanocatalyst to synthesize hydrogen peroxide directly from hydrogen and oxygen, eliminating hazardous chemicals.

  20. Using tablet-based technology in patient education about systemic therapy options for early-stage breast cancer: a pilot study.

    Science.gov (United States)

    Morgan, E R; Laing, K; McCarthy, J; McCrate, F; Seal, M D

    2015-10-01

    Patient education in early-stage breast cancer has been shown to improve patient well-being and quality of life, but it poses a challenge given the increasingly complex regimens and time constraints in clinical practice. Technology-aided teaching in the clinic could help to improve the understanding of adjuvant systemic therapy for patients. In this prospective pilot study, we used a clinician-administered, tablet-based teaching aid to teach patients with early-stage breast cancer about adjuvant systemic therapy. Participation was offered to newly diagnosed patients with early-stage breast cancer presenting for their first medical oncology visit at a provincial cancer centre. Participants were shown a tablet-based presentation describing procedures, rationales, risks, and benefits of adjuvant systemic therapy as an adjunct to a discussion with the medical oncologist. After the clinic visit, participants completed a questionnaire measuring satisfaction with the visit and knowledge of the treatment plan discussed. The 25 patients recruited for the study had a mean age of 57 years. An offer of upfront chemotherapy alone was made to 12 participants (48%), chemotherapy with trastuzumab to 4 (16%), and hormonal therapy to 9 (36%). Correct answers to all questions related to treatment knowledge were given by 22 patients (88%). Satisfaction with the clinic visit was high (mean satisfaction score: 4.53 ± 0.1 of a possible 5). We found that a tablet-based presentation about adjuvant systemic therapy was satisfactory to patients with early-stage breast cancer and that knowledge retention after the clinic visit was high. Tablet-based teaching could be a feasible and effective way of educating patients in the breast oncology clinic and warrants further investigation in randomized studies.